summaryrefslogtreecommitdiffstats
path: root/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
diff options
context:
space:
mode:
Diffstat (limited to '')
-rw-r--r--drivers/phy/rockchip/phy-rockchip-inno-usb2.c1449
1 files changed, 1449 insertions, 0 deletions
diff --git a/drivers/phy/rockchip/phy-rockchip-inno-usb2.c b/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
new file mode 100644
index 000000000..cab6a94bf
--- /dev/null
+++ b/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
@@ -0,0 +1,1449 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Rockchip USB2.0 PHY with Innosilicon IP block driver
+ *
+ * Copyright (C) 2016 Fuzhou Rockchip Electronics Co., Ltd
+ */
+
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/delay.h>
+#include <linux/extcon-provider.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/gpio/consumer.h>
+#include <linux/jiffies.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+#include <linux/power_supply.h>
+#include <linux/regmap.h>
+#include <linux/mfd/syscon.h>
+#include <linux/usb/of.h>
+#include <linux/usb/otg.h>
+
+#define BIT_WRITEABLE_SHIFT 16
+#define SCHEDULE_DELAY (60 * HZ)
+#define OTG_SCHEDULE_DELAY (2 * HZ)
+
+enum rockchip_usb2phy_port_id {
+ USB2PHY_PORT_OTG,
+ USB2PHY_PORT_HOST,
+ USB2PHY_NUM_PORTS,
+};
+
+enum rockchip_usb2phy_host_state {
+ PHY_STATE_HS_ONLINE = 0,
+ PHY_STATE_DISCONNECT = 1,
+ PHY_STATE_CONNECT = 2,
+ PHY_STATE_FS_LS_ONLINE = 4,
+};
+
+/**
+ * enum usb_chg_state - Different states involved in USB charger detection.
+ * @USB_CHG_STATE_UNDEFINED: USB charger is not connected or detection
+ * process is not yet started.
+ * @USB_CHG_STATE_WAIT_FOR_DCD: Waiting for Data pins contact.
+ * @USB_CHG_STATE_DCD_DONE: Data pin contact is detected.
+ * @USB_CHG_STATE_PRIMARY_DONE: Primary detection is completed (Detects
+ * between SDP and DCP/CDP).
+ * @USB_CHG_STATE_SECONDARY_DONE: Secondary detection is completed (Detects
+ * between DCP and CDP).
+ * @USB_CHG_STATE_DETECTED: USB charger type is determined.
+ */
+enum usb_chg_state {
+ USB_CHG_STATE_UNDEFINED = 0,
+ USB_CHG_STATE_WAIT_FOR_DCD,
+ USB_CHG_STATE_DCD_DONE,
+ USB_CHG_STATE_PRIMARY_DONE,
+ USB_CHG_STATE_SECONDARY_DONE,
+ USB_CHG_STATE_DETECTED,
+};
+
+static const unsigned int rockchip_usb2phy_extcon_cable[] = {
+ EXTCON_USB,
+ EXTCON_USB_HOST,
+ EXTCON_CHG_USB_SDP,
+ EXTCON_CHG_USB_CDP,
+ EXTCON_CHG_USB_DCP,
+ EXTCON_CHG_USB_SLOW,
+ EXTCON_NONE,
+};
+
+struct usb2phy_reg {
+ unsigned int offset;
+ unsigned int bitend;
+ unsigned int bitstart;
+ unsigned int disable;
+ unsigned int enable;
+};
+
+/**
+ * struct rockchip_chg_det_reg - usb charger detect registers
+ * @cp_det: charging port detected successfully.
+ * @dcp_det: dedicated charging port detected successfully.
+ * @dp_det: assert data pin connect successfully.
+ * @idm_sink_en: open dm sink curren.
+ * @idp_sink_en: open dp sink current.
+ * @idp_src_en: open dm source current.
+ * @rdm_pdwn_en: open dm pull down resistor.
+ * @vdm_src_en: open dm voltage source.
+ * @vdp_src_en: open dp voltage source.
+ * @opmode: utmi operational mode.
+ */
+struct rockchip_chg_det_reg {
+ struct usb2phy_reg cp_det;
+ struct usb2phy_reg dcp_det;
+ struct usb2phy_reg dp_det;
+ struct usb2phy_reg idm_sink_en;
+ struct usb2phy_reg idp_sink_en;
+ struct usb2phy_reg idp_src_en;
+ struct usb2phy_reg rdm_pdwn_en;
+ struct usb2phy_reg vdm_src_en;
+ struct usb2phy_reg vdp_src_en;
+ struct usb2phy_reg opmode;
+};
+
+/**
+ * struct rockchip_usb2phy_port_cfg - usb-phy port configuration.
+ * @phy_sus: phy suspend register.
+ * @bvalid_det_en: vbus valid rise detection enable register.
+ * @bvalid_det_st: vbus valid rise detection status register.
+ * @bvalid_det_clr: vbus valid rise detection clear register.
+ * @ls_det_en: linestate detection enable register.
+ * @ls_det_st: linestate detection state register.
+ * @ls_det_clr: linestate detection clear register.
+ * @utmi_avalid: utmi vbus avalid status register.
+ * @utmi_bvalid: utmi vbus bvalid status register.
+ * @utmi_ls: utmi linestate state register.
+ * @utmi_hstdet: utmi host disconnect register.
+ */
+struct rockchip_usb2phy_port_cfg {
+ struct usb2phy_reg phy_sus;
+ struct usb2phy_reg bvalid_det_en;
+ struct usb2phy_reg bvalid_det_st;
+ struct usb2phy_reg bvalid_det_clr;
+ struct usb2phy_reg ls_det_en;
+ struct usb2phy_reg ls_det_st;
+ struct usb2phy_reg ls_det_clr;
+ struct usb2phy_reg utmi_avalid;
+ struct usb2phy_reg utmi_bvalid;
+ struct usb2phy_reg utmi_ls;
+ struct usb2phy_reg utmi_hstdet;
+};
+
+/**
+ * struct rockchip_usb2phy_cfg - usb-phy configuration.
+ * @reg: the address offset of grf for usb-phy config.
+ * @num_ports: specify how many ports that the phy has.
+ * @clkout_ctl: keep on/turn off output clk of phy.
+ * @port_cfgs: usb-phy port configurations.
+ * @chg_det: charger detection registers.
+ */
+struct rockchip_usb2phy_cfg {
+ unsigned int reg;
+ unsigned int num_ports;
+ struct usb2phy_reg clkout_ctl;
+ const struct rockchip_usb2phy_port_cfg port_cfgs[USB2PHY_NUM_PORTS];
+ const struct rockchip_chg_det_reg chg_det;
+};
+
+/**
+ * struct rockchip_usb2phy_port - usb-phy port data.
+ * @phy: generic phy.
+ * @port_id: flag for otg port or host port.
+ * @suspended: phy suspended flag.
+ * @vbus_attached: otg device vbus status.
+ * @bvalid_irq: IRQ number assigned for vbus valid rise detection.
+ * @ls_irq: IRQ number assigned for linestate detection.
+ * @otg_mux_irq: IRQ number which multiplex otg-id/otg-bvalid/linestate
+ * irqs to one irq in otg-port.
+ * @mutex: for register updating in sm_work.
+ * @chg_work: charge detect work.
+ * @otg_sm_work: OTG state machine work.
+ * @sm_work: HOST state machine work.
+ * @port_cfg: port register configuration, assigned by driver data.
+ * @event_nb: hold event notification callback.
+ * @state: define OTG enumeration states before device reset.
+ * @mode: the dr_mode of the controller.
+ */
+struct rockchip_usb2phy_port {
+ struct phy *phy;
+ unsigned int port_id;
+ bool suspended;
+ bool vbus_attached;
+ int bvalid_irq;
+ int ls_irq;
+ int otg_mux_irq;
+ struct mutex mutex;
+ struct delayed_work chg_work;
+ struct delayed_work otg_sm_work;
+ struct delayed_work sm_work;
+ const struct rockchip_usb2phy_port_cfg *port_cfg;
+ struct notifier_block event_nb;
+ enum usb_otg_state state;
+ enum usb_dr_mode mode;
+};
+
+/**
+ * struct rockchip_usb2phy - usb2.0 phy driver data.
+ * @dev: pointer to device.
+ * @grf: General Register Files regmap.
+ * @usbgrf: USB General Register Files regmap.
+ * @clk: clock struct of phy input clk.
+ * @clk480m: clock struct of phy output clk.
+ * @clk480m_hw: clock struct of phy output clk management.
+ * @chg_state: states involved in USB charger detection.
+ * @chg_type: USB charger types.
+ * @dcd_retries: The retry count used to track Data contact
+ * detection process.
+ * @edev: extcon device for notification registration
+ * @phy_cfg: phy register configuration, assigned by driver data.
+ * @ports: phy port instance.
+ */
+struct rockchip_usb2phy {
+ struct device *dev;
+ struct regmap *grf;
+ struct regmap *usbgrf;
+ struct clk *clk;
+ struct clk *clk480m;
+ struct clk_hw clk480m_hw;
+ enum usb_chg_state chg_state;
+ enum power_supply_type chg_type;
+ u8 dcd_retries;
+ struct extcon_dev *edev;
+ const struct rockchip_usb2phy_cfg *phy_cfg;
+ struct rockchip_usb2phy_port ports[USB2PHY_NUM_PORTS];
+};
+
+static inline struct regmap *get_reg_base(struct rockchip_usb2phy *rphy)
+{
+ return rphy->usbgrf == NULL ? rphy->grf : rphy->usbgrf;
+}
+
+static inline int property_enable(struct regmap *base,
+ const struct usb2phy_reg *reg, bool en)
+{
+ unsigned int val, mask, tmp;
+
+ tmp = en ? reg->enable : reg->disable;
+ mask = GENMASK(reg->bitend, reg->bitstart);
+ val = (tmp << reg->bitstart) | (mask << BIT_WRITEABLE_SHIFT);
+
+ return regmap_write(base, reg->offset, val);
+}
+
+static inline bool property_enabled(struct regmap *base,
+ const struct usb2phy_reg *reg)
+{
+ int ret;
+ unsigned int tmp, orig;
+ unsigned int mask = GENMASK(reg->bitend, reg->bitstart);
+
+ ret = regmap_read(base, reg->offset, &orig);
+ if (ret)
+ return false;
+
+ tmp = (orig & mask) >> reg->bitstart;
+ return tmp == reg->enable;
+}
+
+static int rockchip_usb2phy_clk480m_prepare(struct clk_hw *hw)
+{
+ struct rockchip_usb2phy *rphy =
+ container_of(hw, struct rockchip_usb2phy, clk480m_hw);
+ struct regmap *base = get_reg_base(rphy);
+ int ret;
+
+ /* turn on 480m clk output if it is off */
+ if (!property_enabled(base, &rphy->phy_cfg->clkout_ctl)) {
+ ret = property_enable(base, &rphy->phy_cfg->clkout_ctl, true);
+ if (ret)
+ return ret;
+
+ /* waiting for the clk become stable */
+ usleep_range(1200, 1300);
+ }
+
+ return 0;
+}
+
+static void rockchip_usb2phy_clk480m_unprepare(struct clk_hw *hw)
+{
+ struct rockchip_usb2phy *rphy =
+ container_of(hw, struct rockchip_usb2phy, clk480m_hw);
+ struct regmap *base = get_reg_base(rphy);
+
+ /* turn off 480m clk output */
+ property_enable(base, &rphy->phy_cfg->clkout_ctl, false);
+}
+
+static int rockchip_usb2phy_clk480m_prepared(struct clk_hw *hw)
+{
+ struct rockchip_usb2phy *rphy =
+ container_of(hw, struct rockchip_usb2phy, clk480m_hw);
+ struct regmap *base = get_reg_base(rphy);
+
+ return property_enabled(base, &rphy->phy_cfg->clkout_ctl);
+}
+
+static unsigned long
+rockchip_usb2phy_clk480m_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ return 480000000;
+}
+
+static const struct clk_ops rockchip_usb2phy_clkout_ops = {
+ .prepare = rockchip_usb2phy_clk480m_prepare,
+ .unprepare = rockchip_usb2phy_clk480m_unprepare,
+ .is_prepared = rockchip_usb2phy_clk480m_prepared,
+ .recalc_rate = rockchip_usb2phy_clk480m_recalc_rate,
+};
+
+static void rockchip_usb2phy_clk480m_unregister(void *data)
+{
+ struct rockchip_usb2phy *rphy = data;
+
+ of_clk_del_provider(rphy->dev->of_node);
+ clk_unregister(rphy->clk480m);
+}
+
+static int
+rockchip_usb2phy_clk480m_register(struct rockchip_usb2phy *rphy)
+{
+ struct device_node *node = rphy->dev->of_node;
+ struct clk_init_data init;
+ const char *clk_name;
+ int ret;
+
+ init.flags = 0;
+ init.name = "clk_usbphy_480m";
+ init.ops = &rockchip_usb2phy_clkout_ops;
+
+ /* optional override of the clockname */
+ of_property_read_string(node, "clock-output-names", &init.name);
+
+ if (rphy->clk) {
+ clk_name = __clk_get_name(rphy->clk);
+ init.parent_names = &clk_name;
+ init.num_parents = 1;
+ } else {
+ init.parent_names = NULL;
+ init.num_parents = 0;
+ }
+
+ rphy->clk480m_hw.init = &init;
+
+ /* register the clock */
+ rphy->clk480m = clk_register(rphy->dev, &rphy->clk480m_hw);
+ if (IS_ERR(rphy->clk480m)) {
+ ret = PTR_ERR(rphy->clk480m);
+ goto err_ret;
+ }
+
+ ret = of_clk_add_provider(node, of_clk_src_simple_get, rphy->clk480m);
+ if (ret < 0)
+ goto err_clk_provider;
+
+ ret = devm_add_action(rphy->dev, rockchip_usb2phy_clk480m_unregister,
+ rphy);
+ if (ret < 0)
+ goto err_unreg_action;
+
+ return 0;
+
+err_unreg_action:
+ of_clk_del_provider(node);
+err_clk_provider:
+ clk_unregister(rphy->clk480m);
+err_ret:
+ return ret;
+}
+
+static int rockchip_usb2phy_extcon_register(struct rockchip_usb2phy *rphy)
+{
+ int ret;
+ struct device_node *node = rphy->dev->of_node;
+ struct extcon_dev *edev;
+
+ if (of_property_read_bool(node, "extcon")) {
+ edev = extcon_get_edev_by_phandle(rphy->dev, 0);
+ if (IS_ERR(edev)) {
+ if (PTR_ERR(edev) != -EPROBE_DEFER)
+ dev_err(rphy->dev, "Invalid or missing extcon\n");
+ return PTR_ERR(edev);
+ }
+ } else {
+ /* Initialize extcon device */
+ edev = devm_extcon_dev_allocate(rphy->dev,
+ rockchip_usb2phy_extcon_cable);
+
+ if (IS_ERR(edev))
+ return -ENOMEM;
+
+ ret = devm_extcon_dev_register(rphy->dev, edev);
+ if (ret) {
+ dev_err(rphy->dev, "failed to register extcon device\n");
+ return ret;
+ }
+ }
+
+ rphy->edev = edev;
+
+ return 0;
+}
+
+static int rockchip_usb2phy_init(struct phy *phy)
+{
+ struct rockchip_usb2phy_port *rport = phy_get_drvdata(phy);
+ struct rockchip_usb2phy *rphy = dev_get_drvdata(phy->dev.parent);
+ int ret = 0;
+
+ mutex_lock(&rport->mutex);
+
+ if (rport->port_id == USB2PHY_PORT_OTG) {
+ if (rport->mode != USB_DR_MODE_HOST &&
+ rport->mode != USB_DR_MODE_UNKNOWN) {
+ /* clear bvalid status and enable bvalid detect irq */
+ ret = property_enable(rphy->grf,
+ &rport->port_cfg->bvalid_det_clr,
+ true);
+ if (ret)
+ goto out;
+
+ ret = property_enable(rphy->grf,
+ &rport->port_cfg->bvalid_det_en,
+ true);
+ if (ret)
+ goto out;
+
+ schedule_delayed_work(&rport->otg_sm_work,
+ OTG_SCHEDULE_DELAY * 3);
+ } else {
+ /* If OTG works in host only mode, do nothing. */
+ dev_dbg(&rport->phy->dev, "mode %d\n", rport->mode);
+ }
+ } else if (rport->port_id == USB2PHY_PORT_HOST) {
+ /* clear linestate and enable linestate detect irq */
+ ret = property_enable(rphy->grf,
+ &rport->port_cfg->ls_det_clr, true);
+ if (ret)
+ goto out;
+
+ ret = property_enable(rphy->grf,
+ &rport->port_cfg->ls_det_en, true);
+ if (ret)
+ goto out;
+
+ schedule_delayed_work(&rport->sm_work, SCHEDULE_DELAY);
+ }
+
+out:
+ mutex_unlock(&rport->mutex);
+ return ret;
+}
+
+static int rockchip_usb2phy_power_on(struct phy *phy)
+{
+ struct rockchip_usb2phy_port *rport = phy_get_drvdata(phy);
+ struct rockchip_usb2phy *rphy = dev_get_drvdata(phy->dev.parent);
+ struct regmap *base = get_reg_base(rphy);
+ int ret;
+
+ dev_dbg(&rport->phy->dev, "port power on\n");
+
+ if (!rport->suspended)
+ return 0;
+
+ ret = clk_prepare_enable(rphy->clk480m);
+ if (ret)
+ return ret;
+
+ ret = property_enable(base, &rport->port_cfg->phy_sus, false);
+ if (ret) {
+ clk_disable_unprepare(rphy->clk480m);
+ return ret;
+ }
+
+ /* waiting for the utmi_clk to become stable */
+ usleep_range(1500, 2000);
+
+ rport->suspended = false;
+ return 0;
+}
+
+static int rockchip_usb2phy_power_off(struct phy *phy)
+{
+ struct rockchip_usb2phy_port *rport = phy_get_drvdata(phy);
+ struct rockchip_usb2phy *rphy = dev_get_drvdata(phy->dev.parent);
+ struct regmap *base = get_reg_base(rphy);
+ int ret;
+
+ dev_dbg(&rport->phy->dev, "port power off\n");
+
+ if (rport->suspended)
+ return 0;
+
+ ret = property_enable(base, &rport->port_cfg->phy_sus, true);
+ if (ret)
+ return ret;
+
+ rport->suspended = true;
+ clk_disable_unprepare(rphy->clk480m);
+
+ return 0;
+}
+
+static int rockchip_usb2phy_exit(struct phy *phy)
+{
+ struct rockchip_usb2phy_port *rport = phy_get_drvdata(phy);
+
+ if (rport->port_id == USB2PHY_PORT_OTG &&
+ rport->mode != USB_DR_MODE_HOST &&
+ rport->mode != USB_DR_MODE_UNKNOWN) {
+ cancel_delayed_work_sync(&rport->otg_sm_work);
+ cancel_delayed_work_sync(&rport->chg_work);
+ } else if (rport->port_id == USB2PHY_PORT_HOST)
+ cancel_delayed_work_sync(&rport->sm_work);
+
+ return 0;
+}
+
+static const struct phy_ops rockchip_usb2phy_ops = {
+ .init = rockchip_usb2phy_init,
+ .exit = rockchip_usb2phy_exit,
+ .power_on = rockchip_usb2phy_power_on,
+ .power_off = rockchip_usb2phy_power_off,
+ .owner = THIS_MODULE,
+};
+
+static void rockchip_usb2phy_otg_sm_work(struct work_struct *work)
+{
+ struct rockchip_usb2phy_port *rport =
+ container_of(work, struct rockchip_usb2phy_port,
+ otg_sm_work.work);
+ struct rockchip_usb2phy *rphy = dev_get_drvdata(rport->phy->dev.parent);
+ static unsigned int cable;
+ unsigned long delay;
+ bool vbus_attach, sch_work, notify_charger;
+
+ vbus_attach = property_enabled(rphy->grf,
+ &rport->port_cfg->utmi_bvalid);
+
+ sch_work = false;
+ notify_charger = false;
+ delay = OTG_SCHEDULE_DELAY;
+ dev_dbg(&rport->phy->dev, "%s otg sm work\n",
+ usb_otg_state_string(rport->state));
+
+ switch (rport->state) {
+ case OTG_STATE_UNDEFINED:
+ rport->state = OTG_STATE_B_IDLE;
+ if (!vbus_attach)
+ rockchip_usb2phy_power_off(rport->phy);
+ fallthrough;
+ case OTG_STATE_B_IDLE:
+ if (extcon_get_state(rphy->edev, EXTCON_USB_HOST) > 0) {
+ dev_dbg(&rport->phy->dev, "usb otg host connect\n");
+ rport->state = OTG_STATE_A_HOST;
+ rockchip_usb2phy_power_on(rport->phy);
+ return;
+ } else if (vbus_attach) {
+ dev_dbg(&rport->phy->dev, "vbus_attach\n");
+ switch (rphy->chg_state) {
+ case USB_CHG_STATE_UNDEFINED:
+ schedule_delayed_work(&rport->chg_work, 0);
+ return;
+ case USB_CHG_STATE_DETECTED:
+ switch (rphy->chg_type) {
+ case POWER_SUPPLY_TYPE_USB:
+ dev_dbg(&rport->phy->dev, "sdp cable is connected\n");
+ rockchip_usb2phy_power_on(rport->phy);
+ rport->state = OTG_STATE_B_PERIPHERAL;
+ notify_charger = true;
+ sch_work = true;
+ cable = EXTCON_CHG_USB_SDP;
+ break;
+ case POWER_SUPPLY_TYPE_USB_DCP:
+ dev_dbg(&rport->phy->dev, "dcp cable is connected\n");
+ rockchip_usb2phy_power_off(rport->phy);
+ notify_charger = true;
+ sch_work = true;
+ cable = EXTCON_CHG_USB_DCP;
+ break;
+ case POWER_SUPPLY_TYPE_USB_CDP:
+ dev_dbg(&rport->phy->dev, "cdp cable is connected\n");
+ rockchip_usb2phy_power_on(rport->phy);
+ rport->state = OTG_STATE_B_PERIPHERAL;
+ notify_charger = true;
+ sch_work = true;
+ cable = EXTCON_CHG_USB_CDP;
+ break;
+ default:
+ break;
+ }
+ break;
+ default:
+ break;
+ }
+ } else {
+ notify_charger = true;
+ rphy->chg_state = USB_CHG_STATE_UNDEFINED;
+ rphy->chg_type = POWER_SUPPLY_TYPE_UNKNOWN;
+ }
+
+ if (rport->vbus_attached != vbus_attach) {
+ rport->vbus_attached = vbus_attach;
+
+ if (notify_charger && rphy->edev) {
+ extcon_set_state_sync(rphy->edev,
+ cable, vbus_attach);
+ if (cable == EXTCON_CHG_USB_SDP)
+ extcon_set_state_sync(rphy->edev,
+ EXTCON_USB,
+ vbus_attach);
+ }
+ }
+ break;
+ case OTG_STATE_B_PERIPHERAL:
+ if (!vbus_attach) {
+ dev_dbg(&rport->phy->dev, "usb disconnect\n");
+ rphy->chg_state = USB_CHG_STATE_UNDEFINED;
+ rphy->chg_type = POWER_SUPPLY_TYPE_UNKNOWN;
+ rport->state = OTG_STATE_B_IDLE;
+ delay = 0;
+ rockchip_usb2phy_power_off(rport->phy);
+ }
+ sch_work = true;
+ break;
+ case OTG_STATE_A_HOST:
+ if (extcon_get_state(rphy->edev, EXTCON_USB_HOST) == 0) {
+ dev_dbg(&rport->phy->dev, "usb otg host disconnect\n");
+ rport->state = OTG_STATE_B_IDLE;
+ rockchip_usb2phy_power_off(rport->phy);
+ }
+ break;
+ default:
+ break;
+ }
+
+ if (sch_work)
+ schedule_delayed_work(&rport->otg_sm_work, delay);
+}
+
+static const char *chg_to_string(enum power_supply_type chg_type)
+{
+ switch (chg_type) {
+ case POWER_SUPPLY_TYPE_USB:
+ return "USB_SDP_CHARGER";
+ case POWER_SUPPLY_TYPE_USB_DCP:
+ return "USB_DCP_CHARGER";
+ case POWER_SUPPLY_TYPE_USB_CDP:
+ return "USB_CDP_CHARGER";
+ default:
+ return "INVALID_CHARGER";
+ }
+}
+
+static void rockchip_chg_enable_dcd(struct rockchip_usb2phy *rphy,
+ bool en)
+{
+ struct regmap *base = get_reg_base(rphy);
+
+ property_enable(base, &rphy->phy_cfg->chg_det.rdm_pdwn_en, en);
+ property_enable(base, &rphy->phy_cfg->chg_det.idp_src_en, en);
+}
+
+static void rockchip_chg_enable_primary_det(struct rockchip_usb2phy *rphy,
+ bool en)
+{
+ struct regmap *base = get_reg_base(rphy);
+
+ property_enable(base, &rphy->phy_cfg->chg_det.vdp_src_en, en);
+ property_enable(base, &rphy->phy_cfg->chg_det.idm_sink_en, en);
+}
+
+static void rockchip_chg_enable_secondary_det(struct rockchip_usb2phy *rphy,
+ bool en)
+{
+ struct regmap *base = get_reg_base(rphy);
+
+ property_enable(base, &rphy->phy_cfg->chg_det.vdm_src_en, en);
+ property_enable(base, &rphy->phy_cfg->chg_det.idp_sink_en, en);
+}
+
+#define CHG_DCD_POLL_TIME (100 * HZ / 1000)
+#define CHG_DCD_MAX_RETRIES 6
+#define CHG_PRIMARY_DET_TIME (40 * HZ / 1000)
+#define CHG_SECONDARY_DET_TIME (40 * HZ / 1000)
+static void rockchip_chg_detect_work(struct work_struct *work)
+{
+ struct rockchip_usb2phy_port *rport =
+ container_of(work, struct rockchip_usb2phy_port, chg_work.work);
+ struct rockchip_usb2phy *rphy = dev_get_drvdata(rport->phy->dev.parent);
+ struct regmap *base = get_reg_base(rphy);
+ bool is_dcd, tmout, vout;
+ unsigned long delay;
+
+ dev_dbg(&rport->phy->dev, "chg detection work state = %d\n",
+ rphy->chg_state);
+ switch (rphy->chg_state) {
+ case USB_CHG_STATE_UNDEFINED:
+ if (!rport->suspended)
+ rockchip_usb2phy_power_off(rport->phy);
+ /* put the controller in non-driving mode */
+ property_enable(base, &rphy->phy_cfg->chg_det.opmode, false);
+ /* Start DCD processing stage 1 */
+ rockchip_chg_enable_dcd(rphy, true);
+ rphy->chg_state = USB_CHG_STATE_WAIT_FOR_DCD;
+ rphy->dcd_retries = 0;
+ delay = CHG_DCD_POLL_TIME;
+ break;
+ case USB_CHG_STATE_WAIT_FOR_DCD:
+ /* get data contact detection status */
+ is_dcd = property_enabled(rphy->grf,
+ &rphy->phy_cfg->chg_det.dp_det);
+ tmout = ++rphy->dcd_retries == CHG_DCD_MAX_RETRIES;
+ /* stage 2 */
+ if (is_dcd || tmout) {
+ /* stage 4 */
+ /* Turn off DCD circuitry */
+ rockchip_chg_enable_dcd(rphy, false);
+ /* Voltage Source on DP, Probe on DM */
+ rockchip_chg_enable_primary_det(rphy, true);
+ delay = CHG_PRIMARY_DET_TIME;
+ rphy->chg_state = USB_CHG_STATE_DCD_DONE;
+ } else {
+ /* stage 3 */
+ delay = CHG_DCD_POLL_TIME;
+ }
+ break;
+ case USB_CHG_STATE_DCD_DONE:
+ vout = property_enabled(rphy->grf,
+ &rphy->phy_cfg->chg_det.cp_det);
+ rockchip_chg_enable_primary_det(rphy, false);
+ if (vout) {
+ /* Voltage Source on DM, Probe on DP */
+ rockchip_chg_enable_secondary_det(rphy, true);
+ delay = CHG_SECONDARY_DET_TIME;
+ rphy->chg_state = USB_CHG_STATE_PRIMARY_DONE;
+ } else {
+ if (rphy->dcd_retries == CHG_DCD_MAX_RETRIES) {
+ /* floating charger found */
+ rphy->chg_type = POWER_SUPPLY_TYPE_USB_DCP;
+ rphy->chg_state = USB_CHG_STATE_DETECTED;
+ delay = 0;
+ } else {
+ rphy->chg_type = POWER_SUPPLY_TYPE_USB;
+ rphy->chg_state = USB_CHG_STATE_DETECTED;
+ delay = 0;
+ }
+ }
+ break;
+ case USB_CHG_STATE_PRIMARY_DONE:
+ vout = property_enabled(rphy->grf,
+ &rphy->phy_cfg->chg_det.dcp_det);
+ /* Turn off voltage source */
+ rockchip_chg_enable_secondary_det(rphy, false);
+ if (vout)
+ rphy->chg_type = POWER_SUPPLY_TYPE_USB_DCP;
+ else
+ rphy->chg_type = POWER_SUPPLY_TYPE_USB_CDP;
+ fallthrough;
+ case USB_CHG_STATE_SECONDARY_DONE:
+ rphy->chg_state = USB_CHG_STATE_DETECTED;
+ delay = 0;
+ fallthrough;
+ case USB_CHG_STATE_DETECTED:
+ /* put the controller in normal mode */
+ property_enable(base, &rphy->phy_cfg->chg_det.opmode, true);
+ rockchip_usb2phy_otg_sm_work(&rport->otg_sm_work.work);
+ dev_dbg(&rport->phy->dev, "charger = %s\n",
+ chg_to_string(rphy->chg_type));
+ return;
+ default:
+ return;
+ }
+
+ schedule_delayed_work(&rport->chg_work, delay);
+}
+
+/*
+ * The function manage host-phy port state and suspend/resume phy port
+ * to save power.
+ *
+ * we rely on utmi_linestate and utmi_hostdisconnect to identify whether
+ * devices is disconnect or not. Besides, we do not need care it is FS/LS
+ * disconnected or HS disconnected, actually, we just only need get the
+ * device is disconnected at last through rearm the delayed work,
+ * to suspend the phy port in _PHY_STATE_DISCONNECT_ case.
+ *
+ * NOTE: It may invoke *phy_powr_off or *phy_power_on which will invoke
+ * some clk related APIs, so do not invoke it from interrupt context directly.
+ */
+static void rockchip_usb2phy_sm_work(struct work_struct *work)
+{
+ struct rockchip_usb2phy_port *rport =
+ container_of(work, struct rockchip_usb2phy_port, sm_work.work);
+ struct rockchip_usb2phy *rphy = dev_get_drvdata(rport->phy->dev.parent);
+ unsigned int sh = rport->port_cfg->utmi_hstdet.bitend -
+ rport->port_cfg->utmi_hstdet.bitstart + 1;
+ unsigned int ul, uhd, state;
+ unsigned int ul_mask, uhd_mask;
+ int ret;
+
+ mutex_lock(&rport->mutex);
+
+ ret = regmap_read(rphy->grf, rport->port_cfg->utmi_ls.offset, &ul);
+ if (ret < 0)
+ goto next_schedule;
+
+ ret = regmap_read(rphy->grf, rport->port_cfg->utmi_hstdet.offset, &uhd);
+ if (ret < 0)
+ goto next_schedule;
+
+ uhd_mask = GENMASK(rport->port_cfg->utmi_hstdet.bitend,
+ rport->port_cfg->utmi_hstdet.bitstart);
+ ul_mask = GENMASK(rport->port_cfg->utmi_ls.bitend,
+ rport->port_cfg->utmi_ls.bitstart);
+
+ /* stitch on utmi_ls and utmi_hstdet as phy state */
+ state = ((uhd & uhd_mask) >> rport->port_cfg->utmi_hstdet.bitstart) |
+ (((ul & ul_mask) >> rport->port_cfg->utmi_ls.bitstart) << sh);
+
+ switch (state) {
+ case PHY_STATE_HS_ONLINE:
+ dev_dbg(&rport->phy->dev, "HS online\n");
+ break;
+ case PHY_STATE_FS_LS_ONLINE:
+ /*
+ * For FS/LS device, the online state share with connect state
+ * from utmi_ls and utmi_hstdet register, so we distinguish
+ * them via suspended flag.
+ *
+ * Plus, there are two cases, one is D- Line pull-up, and D+
+ * line pull-down, the state is 4; another is D+ line pull-up,
+ * and D- line pull-down, the state is 2.
+ */
+ if (!rport->suspended) {
+ /* D- line pull-up, D+ line pull-down */
+ dev_dbg(&rport->phy->dev, "FS/LS online\n");
+ break;
+ }
+ fallthrough;
+ case PHY_STATE_CONNECT:
+ if (rport->suspended) {
+ dev_dbg(&rport->phy->dev, "Connected\n");
+ rockchip_usb2phy_power_on(rport->phy);
+ rport->suspended = false;
+ } else {
+ /* D+ line pull-up, D- line pull-down */
+ dev_dbg(&rport->phy->dev, "FS/LS online\n");
+ }
+ break;
+ case PHY_STATE_DISCONNECT:
+ if (!rport->suspended) {
+ dev_dbg(&rport->phy->dev, "Disconnected\n");
+ rockchip_usb2phy_power_off(rport->phy);
+ rport->suspended = true;
+ }
+
+ /*
+ * activate the linestate detection to get the next device
+ * plug-in irq.
+ */
+ property_enable(rphy->grf, &rport->port_cfg->ls_det_clr, true);
+ property_enable(rphy->grf, &rport->port_cfg->ls_det_en, true);
+
+ /*
+ * we don't need to rearm the delayed work when the phy port
+ * is suspended.
+ */
+ mutex_unlock(&rport->mutex);
+ return;
+ default:
+ dev_dbg(&rport->phy->dev, "unknown phy state\n");
+ break;
+ }
+
+next_schedule:
+ mutex_unlock(&rport->mutex);
+ schedule_delayed_work(&rport->sm_work, SCHEDULE_DELAY);
+}
+
+static irqreturn_t rockchip_usb2phy_linestate_irq(int irq, void *data)
+{
+ struct rockchip_usb2phy_port *rport = data;
+ struct rockchip_usb2phy *rphy = dev_get_drvdata(rport->phy->dev.parent);
+
+ if (!property_enabled(rphy->grf, &rport->port_cfg->ls_det_st))
+ return IRQ_NONE;
+
+ mutex_lock(&rport->mutex);
+
+ /* disable linestate detect irq and clear its status */
+ property_enable(rphy->grf, &rport->port_cfg->ls_det_en, false);
+ property_enable(rphy->grf, &rport->port_cfg->ls_det_clr, true);
+
+ mutex_unlock(&rport->mutex);
+
+ /*
+ * In this case for host phy port, a new device is plugged in,
+ * meanwhile, if the phy port is suspended, we need rearm the work to
+ * resume it and mange its states; otherwise, we do nothing about that.
+ */
+ if (rport->suspended && rport->port_id == USB2PHY_PORT_HOST)
+ rockchip_usb2phy_sm_work(&rport->sm_work.work);
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t rockchip_usb2phy_bvalid_irq(int irq, void *data)
+{
+ struct rockchip_usb2phy_port *rport = data;
+ struct rockchip_usb2phy *rphy = dev_get_drvdata(rport->phy->dev.parent);
+
+ if (!property_enabled(rphy->grf, &rport->port_cfg->bvalid_det_st))
+ return IRQ_NONE;
+
+ mutex_lock(&rport->mutex);
+
+ /* clear bvalid detect irq pending status */
+ property_enable(rphy->grf, &rport->port_cfg->bvalid_det_clr, true);
+
+ mutex_unlock(&rport->mutex);
+
+ rockchip_usb2phy_otg_sm_work(&rport->otg_sm_work.work);
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t rockchip_usb2phy_otg_mux_irq(int irq, void *data)
+{
+ struct rockchip_usb2phy_port *rport = data;
+ struct rockchip_usb2phy *rphy = dev_get_drvdata(rport->phy->dev.parent);
+
+ if (property_enabled(rphy->grf, &rport->port_cfg->bvalid_det_st))
+ return rockchip_usb2phy_bvalid_irq(irq, data);
+ else
+ return IRQ_NONE;
+}
+
+static int rockchip_usb2phy_host_port_init(struct rockchip_usb2phy *rphy,
+ struct rockchip_usb2phy_port *rport,
+ struct device_node *child_np)
+{
+ int ret;
+
+ rport->port_id = USB2PHY_PORT_HOST;
+ rport->port_cfg = &rphy->phy_cfg->port_cfgs[USB2PHY_PORT_HOST];
+ rport->suspended = true;
+
+ mutex_init(&rport->mutex);
+ INIT_DELAYED_WORK(&rport->sm_work, rockchip_usb2phy_sm_work);
+
+ rport->ls_irq = of_irq_get_byname(child_np, "linestate");
+ if (rport->ls_irq < 0) {
+ dev_err(rphy->dev, "no linestate irq provided\n");
+ return rport->ls_irq;
+ }
+
+ ret = devm_request_threaded_irq(rphy->dev, rport->ls_irq, NULL,
+ rockchip_usb2phy_linestate_irq,
+ IRQF_ONESHOT,
+ "rockchip_usb2phy", rport);
+ if (ret) {
+ dev_err(rphy->dev, "failed to request linestate irq handle\n");
+ return ret;
+ }
+
+ return 0;
+}
+
+static int rockchip_otg_event(struct notifier_block *nb,
+ unsigned long event, void *ptr)
+{
+ struct rockchip_usb2phy_port *rport =
+ container_of(nb, struct rockchip_usb2phy_port, event_nb);
+
+ schedule_delayed_work(&rport->otg_sm_work, OTG_SCHEDULE_DELAY);
+
+ return NOTIFY_DONE;
+}
+
+static int rockchip_usb2phy_otg_port_init(struct rockchip_usb2phy *rphy,
+ struct rockchip_usb2phy_port *rport,
+ struct device_node *child_np)
+{
+ int ret;
+
+ rport->port_id = USB2PHY_PORT_OTG;
+ rport->port_cfg = &rphy->phy_cfg->port_cfgs[USB2PHY_PORT_OTG];
+ rport->state = OTG_STATE_UNDEFINED;
+
+ /*
+ * set suspended flag to true, but actually don't
+ * put phy in suspend mode, it aims to enable usb
+ * phy and clock in power_on() called by usb controller
+ * driver during probe.
+ */
+ rport->suspended = true;
+ rport->vbus_attached = false;
+
+ mutex_init(&rport->mutex);
+
+ rport->mode = of_usb_get_dr_mode_by_phy(child_np, -1);
+ if (rport->mode == USB_DR_MODE_HOST ||
+ rport->mode == USB_DR_MODE_UNKNOWN) {
+ ret = 0;
+ goto out;
+ }
+
+ INIT_DELAYED_WORK(&rport->chg_work, rockchip_chg_detect_work);
+ INIT_DELAYED_WORK(&rport->otg_sm_work, rockchip_usb2phy_otg_sm_work);
+
+ /*
+ * Some SoCs use one interrupt with otg-id/otg-bvalid/linestate
+ * interrupts muxed together, so probe the otg-mux interrupt first,
+ * if not found, then look for the regular interrupts one by one.
+ */
+ rport->otg_mux_irq = of_irq_get_byname(child_np, "otg-mux");
+ if (rport->otg_mux_irq > 0) {
+ ret = devm_request_threaded_irq(rphy->dev, rport->otg_mux_irq,
+ NULL,
+ rockchip_usb2phy_otg_mux_irq,
+ IRQF_ONESHOT,
+ "rockchip_usb2phy_otg",
+ rport);
+ if (ret) {
+ dev_err(rphy->dev,
+ "failed to request otg-mux irq handle\n");
+ goto out;
+ }
+ } else {
+ rport->bvalid_irq = of_irq_get_byname(child_np, "otg-bvalid");
+ if (rport->bvalid_irq < 0) {
+ dev_err(rphy->dev, "no vbus valid irq provided\n");
+ ret = rport->bvalid_irq;
+ goto out;
+ }
+
+ ret = devm_request_threaded_irq(rphy->dev, rport->bvalid_irq,
+ NULL,
+ rockchip_usb2phy_bvalid_irq,
+ IRQF_ONESHOT,
+ "rockchip_usb2phy_bvalid",
+ rport);
+ if (ret) {
+ dev_err(rphy->dev,
+ "failed to request otg-bvalid irq handle\n");
+ goto out;
+ }
+ }
+
+ if (!IS_ERR(rphy->edev)) {
+ rport->event_nb.notifier_call = rockchip_otg_event;
+
+ ret = devm_extcon_register_notifier(rphy->dev, rphy->edev,
+ EXTCON_USB_HOST, &rport->event_nb);
+ if (ret)
+ dev_err(rphy->dev, "register USB HOST notifier failed\n");
+ }
+
+out:
+ return ret;
+}
+
+static int rockchip_usb2phy_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct device_node *np = dev->of_node;
+ struct device_node *child_np;
+ struct phy_provider *provider;
+ struct rockchip_usb2phy *rphy;
+ const struct rockchip_usb2phy_cfg *phy_cfgs;
+ const struct of_device_id *match;
+ unsigned int reg;
+ int index, ret;
+
+ rphy = devm_kzalloc(dev, sizeof(*rphy), GFP_KERNEL);
+ if (!rphy)
+ return -ENOMEM;
+
+ match = of_match_device(dev->driver->of_match_table, dev);
+ if (!match || !match->data) {
+ dev_err(dev, "phy configs are not assigned!\n");
+ return -EINVAL;
+ }
+
+ if (!dev->parent || !dev->parent->of_node)
+ return -EINVAL;
+
+ rphy->grf = syscon_node_to_regmap(dev->parent->of_node);
+ if (IS_ERR(rphy->grf))
+ return PTR_ERR(rphy->grf);
+
+ if (of_device_is_compatible(np, "rockchip,rv1108-usb2phy")) {
+ rphy->usbgrf =
+ syscon_regmap_lookup_by_phandle(dev->of_node,
+ "rockchip,usbgrf");
+ if (IS_ERR(rphy->usbgrf))
+ return PTR_ERR(rphy->usbgrf);
+ } else {
+ rphy->usbgrf = NULL;
+ }
+
+ if (of_property_read_u32(np, "reg", &reg)) {
+ dev_err(dev, "the reg property is not assigned in %pOFn node\n",
+ np);
+ return -EINVAL;
+ }
+
+ rphy->dev = dev;
+ phy_cfgs = match->data;
+ rphy->chg_state = USB_CHG_STATE_UNDEFINED;
+ rphy->chg_type = POWER_SUPPLY_TYPE_UNKNOWN;
+ platform_set_drvdata(pdev, rphy);
+
+ ret = rockchip_usb2phy_extcon_register(rphy);
+ if (ret)
+ return ret;
+
+ /* find out a proper config which can be matched with dt. */
+ index = 0;
+ while (phy_cfgs[index].reg) {
+ if (phy_cfgs[index].reg == reg) {
+ rphy->phy_cfg = &phy_cfgs[index];
+ break;
+ }
+
+ ++index;
+ }
+
+ if (!rphy->phy_cfg) {
+ dev_err(dev, "no phy-config can be matched with %pOFn node\n",
+ np);
+ return -EINVAL;
+ }
+
+ rphy->clk = of_clk_get_by_name(np, "phyclk");
+ if (!IS_ERR(rphy->clk)) {
+ clk_prepare_enable(rphy->clk);
+ } else {
+ dev_info(&pdev->dev, "no phyclk specified\n");
+ rphy->clk = NULL;
+ }
+
+ ret = rockchip_usb2phy_clk480m_register(rphy);
+ if (ret) {
+ dev_err(dev, "failed to register 480m output clock\n");
+ goto disable_clks;
+ }
+
+ index = 0;
+ for_each_available_child_of_node(np, child_np) {
+ struct rockchip_usb2phy_port *rport = &rphy->ports[index];
+ struct phy *phy;
+
+ /* This driver aims to support both otg-port and host-port */
+ if (!of_node_name_eq(child_np, "host-port") &&
+ !of_node_name_eq(child_np, "otg-port"))
+ goto next_child;
+
+ phy = devm_phy_create(dev, child_np, &rockchip_usb2phy_ops);
+ if (IS_ERR(phy)) {
+ dev_err(dev, "failed to create phy\n");
+ ret = PTR_ERR(phy);
+ goto put_child;
+ }
+
+ rport->phy = phy;
+ phy_set_drvdata(rport->phy, rport);
+
+ /* initialize otg/host port separately */
+ if (of_node_name_eq(child_np, "host-port")) {
+ ret = rockchip_usb2phy_host_port_init(rphy, rport,
+ child_np);
+ if (ret)
+ goto put_child;
+ } else {
+ ret = rockchip_usb2phy_otg_port_init(rphy, rport,
+ child_np);
+ if (ret)
+ goto put_child;
+ }
+
+next_child:
+ /* to prevent out of boundary */
+ if (++index >= rphy->phy_cfg->num_ports)
+ break;
+ }
+
+ provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
+ return PTR_ERR_OR_ZERO(provider);
+
+put_child:
+ of_node_put(child_np);
+disable_clks:
+ if (rphy->clk) {
+ clk_disable_unprepare(rphy->clk);
+ clk_put(rphy->clk);
+ }
+ return ret;
+}
+
+static const struct rockchip_usb2phy_cfg rk3228_phy_cfgs[] = {
+ {
+ .reg = 0x760,
+ .num_ports = 2,
+ .clkout_ctl = { 0x0768, 4, 4, 1, 0 },
+ .port_cfgs = {
+ [USB2PHY_PORT_OTG] = {
+ .phy_sus = { 0x0760, 15, 0, 0, 0x1d1 },
+ .bvalid_det_en = { 0x0680, 3, 3, 0, 1 },
+ .bvalid_det_st = { 0x0690, 3, 3, 0, 1 },
+ .bvalid_det_clr = { 0x06a0, 3, 3, 0, 1 },
+ .ls_det_en = { 0x0680, 2, 2, 0, 1 },
+ .ls_det_st = { 0x0690, 2, 2, 0, 1 },
+ .ls_det_clr = { 0x06a0, 2, 2, 0, 1 },
+ .utmi_bvalid = { 0x0480, 4, 4, 0, 1 },
+ .utmi_ls = { 0x0480, 3, 2, 0, 1 },
+ },
+ [USB2PHY_PORT_HOST] = {
+ .phy_sus = { 0x0764, 15, 0, 0, 0x1d1 },
+ .ls_det_en = { 0x0680, 4, 4, 0, 1 },
+ .ls_det_st = { 0x0690, 4, 4, 0, 1 },
+ .ls_det_clr = { 0x06a0, 4, 4, 0, 1 }
+ }
+ },
+ .chg_det = {
+ .opmode = { 0x0760, 3, 0, 5, 1 },
+ .cp_det = { 0x0884, 4, 4, 0, 1 },
+ .dcp_det = { 0x0884, 3, 3, 0, 1 },
+ .dp_det = { 0x0884, 5, 5, 0, 1 },
+ .idm_sink_en = { 0x0768, 8, 8, 0, 1 },
+ .idp_sink_en = { 0x0768, 7, 7, 0, 1 },
+ .idp_src_en = { 0x0768, 9, 9, 0, 1 },
+ .rdm_pdwn_en = { 0x0768, 10, 10, 0, 1 },
+ .vdm_src_en = { 0x0768, 12, 12, 0, 1 },
+ .vdp_src_en = { 0x0768, 11, 11, 0, 1 },
+ },
+ },
+ {
+ .reg = 0x800,
+ .num_ports = 2,
+ .clkout_ctl = { 0x0808, 4, 4, 1, 0 },
+ .port_cfgs = {
+ [USB2PHY_PORT_OTG] = {
+ .phy_sus = { 0x800, 15, 0, 0, 0x1d1 },
+ .ls_det_en = { 0x0684, 0, 0, 0, 1 },
+ .ls_det_st = { 0x0694, 0, 0, 0, 1 },
+ .ls_det_clr = { 0x06a4, 0, 0, 0, 1 }
+ },
+ [USB2PHY_PORT_HOST] = {
+ .phy_sus = { 0x804, 15, 0, 0, 0x1d1 },
+ .ls_det_en = { 0x0684, 1, 1, 0, 1 },
+ .ls_det_st = { 0x0694, 1, 1, 0, 1 },
+ .ls_det_clr = { 0x06a4, 1, 1, 0, 1 }
+ }
+ },
+ },
+ { /* sentinel */ }
+};
+
+static const struct rockchip_usb2phy_cfg rk3328_phy_cfgs[] = {
+ {
+ .reg = 0x100,
+ .num_ports = 2,
+ .clkout_ctl = { 0x108, 4, 4, 1, 0 },
+ .port_cfgs = {
+ [USB2PHY_PORT_OTG] = {
+ .phy_sus = { 0x0100, 15, 0, 0, 0x1d1 },
+ .bvalid_det_en = { 0x0110, 2, 2, 0, 1 },
+ .bvalid_det_st = { 0x0114, 2, 2, 0, 1 },
+ .bvalid_det_clr = { 0x0118, 2, 2, 0, 1 },
+ .ls_det_en = { 0x0110, 0, 0, 0, 1 },
+ .ls_det_st = { 0x0114, 0, 0, 0, 1 },
+ .ls_det_clr = { 0x0118, 0, 0, 0, 1 },
+ .utmi_avalid = { 0x0120, 10, 10, 0, 1 },
+ .utmi_bvalid = { 0x0120, 9, 9, 0, 1 },
+ .utmi_ls = { 0x0120, 5, 4, 0, 1 },
+ },
+ [USB2PHY_PORT_HOST] = {
+ .phy_sus = { 0x104, 15, 0, 0, 0x1d1 },
+ .ls_det_en = { 0x110, 1, 1, 0, 1 },
+ .ls_det_st = { 0x114, 1, 1, 0, 1 },
+ .ls_det_clr = { 0x118, 1, 1, 0, 1 },
+ .utmi_ls = { 0x120, 17, 16, 0, 1 },
+ .utmi_hstdet = { 0x120, 19, 19, 0, 1 }
+ }
+ },
+ .chg_det = {
+ .opmode = { 0x0100, 3, 0, 5, 1 },
+ .cp_det = { 0x0120, 24, 24, 0, 1 },
+ .dcp_det = { 0x0120, 23, 23, 0, 1 },
+ .dp_det = { 0x0120, 25, 25, 0, 1 },
+ .idm_sink_en = { 0x0108, 8, 8, 0, 1 },
+ .idp_sink_en = { 0x0108, 7, 7, 0, 1 },
+ .idp_src_en = { 0x0108, 9, 9, 0, 1 },
+ .rdm_pdwn_en = { 0x0108, 10, 10, 0, 1 },
+ .vdm_src_en = { 0x0108, 12, 12, 0, 1 },
+ .vdp_src_en = { 0x0108, 11, 11, 0, 1 },
+ },
+ },
+ { /* sentinel */ }
+};
+
+static const struct rockchip_usb2phy_cfg rk3366_phy_cfgs[] = {
+ {
+ .reg = 0x700,
+ .num_ports = 2,
+ .clkout_ctl = { 0x0724, 15, 15, 1, 0 },
+ .port_cfgs = {
+ [USB2PHY_PORT_HOST] = {
+ .phy_sus = { 0x0728, 15, 0, 0, 0x1d1 },
+ .ls_det_en = { 0x0680, 4, 4, 0, 1 },
+ .ls_det_st = { 0x0690, 4, 4, 0, 1 },
+ .ls_det_clr = { 0x06a0, 4, 4, 0, 1 },
+ .utmi_ls = { 0x049c, 14, 13, 0, 1 },
+ .utmi_hstdet = { 0x049c, 12, 12, 0, 1 }
+ }
+ },
+ },
+ { /* sentinel */ }
+};
+
+static const struct rockchip_usb2phy_cfg rk3399_phy_cfgs[] = {
+ {
+ .reg = 0xe450,
+ .num_ports = 2,
+ .clkout_ctl = { 0xe450, 4, 4, 1, 0 },
+ .port_cfgs = {
+ [USB2PHY_PORT_OTG] = {
+ .phy_sus = { 0xe454, 1, 0, 2, 1 },
+ .bvalid_det_en = { 0xe3c0, 3, 3, 0, 1 },
+ .bvalid_det_st = { 0xe3e0, 3, 3, 0, 1 },
+ .bvalid_det_clr = { 0xe3d0, 3, 3, 0, 1 },
+ .utmi_avalid = { 0xe2ac, 7, 7, 0, 1 },
+ .utmi_bvalid = { 0xe2ac, 12, 12, 0, 1 },
+ },
+ [USB2PHY_PORT_HOST] = {
+ .phy_sus = { 0xe458, 1, 0, 0x2, 0x1 },
+ .ls_det_en = { 0xe3c0, 6, 6, 0, 1 },
+ .ls_det_st = { 0xe3e0, 6, 6, 0, 1 },
+ .ls_det_clr = { 0xe3d0, 6, 6, 0, 1 },
+ .utmi_ls = { 0xe2ac, 22, 21, 0, 1 },
+ .utmi_hstdet = { 0xe2ac, 23, 23, 0, 1 }
+ }
+ },
+ .chg_det = {
+ .opmode = { 0xe454, 3, 0, 5, 1 },
+ .cp_det = { 0xe2ac, 2, 2, 0, 1 },
+ .dcp_det = { 0xe2ac, 1, 1, 0, 1 },
+ .dp_det = { 0xe2ac, 0, 0, 0, 1 },
+ .idm_sink_en = { 0xe450, 8, 8, 0, 1 },
+ .idp_sink_en = { 0xe450, 7, 7, 0, 1 },
+ .idp_src_en = { 0xe450, 9, 9, 0, 1 },
+ .rdm_pdwn_en = { 0xe450, 10, 10, 0, 1 },
+ .vdm_src_en = { 0xe450, 12, 12, 0, 1 },
+ .vdp_src_en = { 0xe450, 11, 11, 0, 1 },
+ },
+ },
+ {
+ .reg = 0xe460,
+ .num_ports = 2,
+ .clkout_ctl = { 0xe460, 4, 4, 1, 0 },
+ .port_cfgs = {
+ [USB2PHY_PORT_OTG] = {
+ .phy_sus = { 0xe464, 1, 0, 2, 1 },
+ .bvalid_det_en = { 0xe3c0, 8, 8, 0, 1 },
+ .bvalid_det_st = { 0xe3e0, 8, 8, 0, 1 },
+ .bvalid_det_clr = { 0xe3d0, 8, 8, 0, 1 },
+ .utmi_avalid = { 0xe2ac, 10, 10, 0, 1 },
+ .utmi_bvalid = { 0xe2ac, 16, 16, 0, 1 },
+ },
+ [USB2PHY_PORT_HOST] = {
+ .phy_sus = { 0xe468, 1, 0, 0x2, 0x1 },
+ .ls_det_en = { 0xe3c0, 11, 11, 0, 1 },
+ .ls_det_st = { 0xe3e0, 11, 11, 0, 1 },
+ .ls_det_clr = { 0xe3d0, 11, 11, 0, 1 },
+ .utmi_ls = { 0xe2ac, 26, 25, 0, 1 },
+ .utmi_hstdet = { 0xe2ac, 27, 27, 0, 1 }
+ }
+ },
+ },
+ { /* sentinel */ }
+};
+
+static const struct rockchip_usb2phy_cfg rv1108_phy_cfgs[] = {
+ {
+ .reg = 0x100,
+ .num_ports = 2,
+ .clkout_ctl = { 0x108, 4, 4, 1, 0 },
+ .port_cfgs = {
+ [USB2PHY_PORT_OTG] = {
+ .phy_sus = { 0x0100, 15, 0, 0, 0x1d1 },
+ .bvalid_det_en = { 0x0680, 3, 3, 0, 1 },
+ .bvalid_det_st = { 0x0690, 3, 3, 0, 1 },
+ .bvalid_det_clr = { 0x06a0, 3, 3, 0, 1 },
+ .ls_det_en = { 0x0680, 2, 2, 0, 1 },
+ .ls_det_st = { 0x0690, 2, 2, 0, 1 },
+ .ls_det_clr = { 0x06a0, 2, 2, 0, 1 },
+ .utmi_bvalid = { 0x0804, 10, 10, 0, 1 },
+ .utmi_ls = { 0x0804, 13, 12, 0, 1 },
+ },
+ [USB2PHY_PORT_HOST] = {
+ .phy_sus = { 0x0104, 15, 0, 0, 0x1d1 },
+ .ls_det_en = { 0x0680, 4, 4, 0, 1 },
+ .ls_det_st = { 0x0690, 4, 4, 0, 1 },
+ .ls_det_clr = { 0x06a0, 4, 4, 0, 1 },
+ .utmi_ls = { 0x0804, 9, 8, 0, 1 },
+ .utmi_hstdet = { 0x0804, 7, 7, 0, 1 }
+ }
+ },
+ .chg_det = {
+ .opmode = { 0x0100, 3, 0, 5, 1 },
+ .cp_det = { 0x0804, 1, 1, 0, 1 },
+ .dcp_det = { 0x0804, 0, 0, 0, 1 },
+ .dp_det = { 0x0804, 2, 2, 0, 1 },
+ .idm_sink_en = { 0x0108, 8, 8, 0, 1 },
+ .idp_sink_en = { 0x0108, 7, 7, 0, 1 },
+ .idp_src_en = { 0x0108, 9, 9, 0, 1 },
+ .rdm_pdwn_en = { 0x0108, 10, 10, 0, 1 },
+ .vdm_src_en = { 0x0108, 12, 12, 0, 1 },
+ .vdp_src_en = { 0x0108, 11, 11, 0, 1 },
+ },
+ },
+ { /* sentinel */ }
+};
+
+static const struct of_device_id rockchip_usb2phy_dt_match[] = {
+ { .compatible = "rockchip,px30-usb2phy", .data = &rk3328_phy_cfgs },
+ { .compatible = "rockchip,rk3228-usb2phy", .data = &rk3228_phy_cfgs },
+ { .compatible = "rockchip,rk3328-usb2phy", .data = &rk3328_phy_cfgs },
+ { .compatible = "rockchip,rk3366-usb2phy", .data = &rk3366_phy_cfgs },
+ { .compatible = "rockchip,rk3399-usb2phy", .data = &rk3399_phy_cfgs },
+ { .compatible = "rockchip,rv1108-usb2phy", .data = &rv1108_phy_cfgs },
+ {}
+};
+MODULE_DEVICE_TABLE(of, rockchip_usb2phy_dt_match);
+
+static struct platform_driver rockchip_usb2phy_driver = {
+ .probe = rockchip_usb2phy_probe,
+ .driver = {
+ .name = "rockchip-usb2phy",
+ .of_match_table = rockchip_usb2phy_dt_match,
+ },
+};
+module_platform_driver(rockchip_usb2phy_driver);
+
+MODULE_AUTHOR("Frank Wang <frank.wang@rock-chips.com>");
+MODULE_DESCRIPTION("Rockchip USB2.0 PHY driver");
+MODULE_LICENSE("GPL v2");