summaryrefslogtreecommitdiffstats
path: root/drivers/phy/ti
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/phy/ti')
-rw-r--r--drivers/phy/ti/Kconfig113
-rw-r--r--drivers/phy/ti/Makefile11
-rw-r--r--drivers/phy/ti/phy-am654-serdes.c868
-rw-r--r--drivers/phy/ti/phy-da8xx-usb.c246
-rw-r--r--drivers/phy/ti/phy-dm816x-usb.c295
-rw-r--r--drivers/phy/ti/phy-gmii-sel.c403
-rw-r--r--drivers/phy/ti/phy-j721e-wiz.c1018
-rw-r--r--drivers/phy/ti/phy-omap-control.c350
-rw-r--r--drivers/phy/ti/phy-omap-usb2.c535
-rw-r--r--drivers/phy/ti/phy-ti-pipe3.c949
-rw-r--r--drivers/phy/ti/phy-tusb1210.c179
-rw-r--r--drivers/phy/ti/phy-twl4030-usb.c846
12 files changed, 5813 insertions, 0 deletions
diff --git a/drivers/phy/ti/Kconfig b/drivers/phy/ti/Kconfig
new file mode 100644
index 000000000..b905902d5
--- /dev/null
+++ b/drivers/phy/ti/Kconfig
@@ -0,0 +1,113 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# Phy drivers for TI platforms
+#
+config PHY_DA8XX_USB
+ tristate "TI DA8xx USB PHY Driver"
+ depends on ARCH_DAVINCI_DA8XX || COMPILE_TEST
+ select GENERIC_PHY
+ select MFD_SYSCON
+ help
+ Enable this to support the USB PHY on DA8xx SoCs.
+
+ This driver controls both the USB 1.1 PHY and the USB 2.0 PHY.
+
+config PHY_DM816X_USB
+ tristate "TI dm816x USB PHY driver"
+ depends on ARCH_OMAP2PLUS || COMPILE_TEST
+ depends on USB_SUPPORT
+ select GENERIC_PHY
+ select USB_PHY
+ help
+ Enable this for dm816x USB to work.
+
+config PHY_AM654_SERDES
+ tristate "TI AM654 SERDES support"
+ depends on OF && (ARCH_K3 || COMPILE_TEST)
+ depends on COMMON_CLK
+ select GENERIC_PHY
+ select MULTIPLEXER
+ select REGMAP_MMIO
+ select MUX_MMIO
+ help
+ This option enables support for TI AM654 SerDes PHY used for
+ PCIe.
+
+config PHY_J721E_WIZ
+ tristate "TI J721E WIZ (SERDES Wrapper) support"
+ depends on OF && (ARCH_K3 || COMPILE_TEST)
+ depends on HAS_IOMEM && OF_ADDRESS
+ depends on COMMON_CLK
+ select GENERIC_PHY
+ select MULTIPLEXER
+ select REGMAP_MMIO
+ select MUX_MMIO
+ help
+ This option enables support for WIZ module present in TI's J721E
+ SoC. WIZ is a serdes wrapper used to configure some of the input
+ signals to the SERDES (Sierra/Torrent). This driver configures
+ three clock selects (pll0, pll1, dig) and resets for each of the
+ lanes.
+
+config OMAP_CONTROL_PHY
+ tristate "OMAP CONTROL PHY Driver"
+ depends on ARCH_OMAP2PLUS || COMPILE_TEST
+ help
+ Enable this to add support for the PHY part present in the control
+ module. This driver has API to power on the USB2 PHY and to write to
+ the mailbox. The mailbox is present only in omap4 and the register to
+ power on the USB2 PHY is present in OMAP4 and OMAP5. OMAP5 has an
+ additional register to power on USB3 PHY/SATA PHY/PCIE PHY
+ (PIPE3 PHY).
+
+config OMAP_USB2
+ tristate "OMAP USB2 PHY Driver"
+ depends on ARCH_OMAP2PLUS || ARCH_K3
+ depends on USB_SUPPORT
+ select GENERIC_PHY
+ select USB_PHY
+ select OMAP_CONTROL_PHY if ARCH_OMAP2PLUS || COMPILE_TEST
+ help
+ Enable this to support the transceiver that is part of SOC. This
+ driver takes care of all the PHY functionality apart from comparator.
+ The USB OTG controller communicates with the comparator using this
+ driver.
+
+config TI_PIPE3
+ tristate "TI PIPE3 PHY Driver"
+ depends on ARCH_OMAP2PLUS || COMPILE_TEST
+ select GENERIC_PHY
+ select OMAP_CONTROL_PHY
+ help
+ Enable this to support the PIPE3 PHY that is part of TI SOCs. This
+ driver takes care of all the PHY functionality apart from comparator.
+ This driver interacts with the "OMAP Control PHY Driver" to power
+ on/off the PHY.
+
+config PHY_TUSB1210
+ tristate "TI TUSB1210 ULPI PHY module"
+ depends on USB_ULPI_BUS
+ select GENERIC_PHY
+ help
+ Support for TI TUSB1210 USB ULPI PHY.
+
+config TWL4030_USB
+ tristate "TWL4030 USB Transceiver Driver"
+ depends on TWL4030_CORE && REGULATOR_TWL4030 && USB_MUSB_OMAP2PLUS
+ depends on USB_SUPPORT
+ depends on USB_GADGET || !USB_GADGET # if USB_GADGET=m, this can't 'y'
+ select GENERIC_PHY
+ select USB_PHY
+ help
+ Enable this to support the USB OTG transceiver on TWL4030
+ family chips (including the TWL5030 and TPS659x0 devices).
+ This transceiver supports high and full speed devices plus,
+ in host mode, low speed.
+
+config PHY_TI_GMII_SEL
+ tristate
+ select GENERIC_PHY
+ select REGMAP
+ help
+ This driver supports configuring of the TI CPSW Port mode depending on
+ the Ethernet PHY connected to the CPSW Port.
diff --git a/drivers/phy/ti/Makefile b/drivers/phy/ti/Makefile
new file mode 100644
index 000000000..dcba2571c
--- /dev/null
+++ b/drivers/phy/ti/Makefile
@@ -0,0 +1,11 @@
+# SPDX-License-Identifier: GPL-2.0
+obj-$(CONFIG_PHY_DA8XX_USB) += phy-da8xx-usb.o
+obj-$(CONFIG_PHY_DM816X_USB) += phy-dm816x-usb.o
+obj-$(CONFIG_OMAP_CONTROL_PHY) += phy-omap-control.o
+obj-$(CONFIG_OMAP_USB2) += phy-omap-usb2.o
+obj-$(CONFIG_TI_PIPE3) += phy-ti-pipe3.o
+obj-$(CONFIG_PHY_TUSB1210) += phy-tusb1210.o
+obj-$(CONFIG_TWL4030_USB) += phy-twl4030-usb.o
+obj-$(CONFIG_PHY_AM654_SERDES) += phy-am654-serdes.o
+obj-$(CONFIG_PHY_TI_GMII_SEL) += phy-gmii-sel.o
+obj-$(CONFIG_PHY_J721E_WIZ) += phy-j721e-wiz.o
diff --git a/drivers/phy/ti/phy-am654-serdes.c b/drivers/phy/ti/phy-am654-serdes.c
new file mode 100644
index 000000000..21c0088f5
--- /dev/null
+++ b/drivers/phy/ti/phy-am654-serdes.c
@@ -0,0 +1,868 @@
+// SPDX-License-Identifier: GPL-2.0
+/**
+ * PCIe SERDES driver for AM654x SoC
+ *
+ * Copyright (C) 2018 - 2019 Texas Instruments Incorporated - http://www.ti.com/
+ * Author: Kishon Vijay Abraham I <kishon@ti.com>
+ */
+
+#include <dt-bindings/phy/phy.h>
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/delay.h>
+#include <linux/module.h>
+#include <linux/mfd/syscon.h>
+#include <linux/mux/consumer.h>
+#include <linux/of_address.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/regmap.h>
+
+#define CMU_R004 0x4
+#define CMU_R060 0x60
+#define CMU_R07C 0x7c
+#define CMU_R088 0x88
+#define CMU_R0D0 0xd0
+#define CMU_R0E8 0xe8
+
+#define LANE_R048 0x248
+#define LANE_R058 0x258
+#define LANE_R06c 0x26c
+#define LANE_R070 0x270
+#define LANE_R070 0x270
+#define LANE_R19C 0x39c
+
+#define COMLANE_R004 0xa04
+#define COMLANE_R138 0xb38
+#define VERSION_VAL 0x70
+
+#define COMLANE_R190 0xb90
+#define COMLANE_R194 0xb94
+
+#define COMRXEQ_R004 0x1404
+#define COMRXEQ_R008 0x1408
+#define COMRXEQ_R00C 0x140c
+#define COMRXEQ_R014 0x1414
+#define COMRXEQ_R018 0x1418
+#define COMRXEQ_R01C 0x141c
+#define COMRXEQ_R04C 0x144c
+#define COMRXEQ_R088 0x1488
+#define COMRXEQ_R094 0x1494
+#define COMRXEQ_R098 0x1498
+
+#define SERDES_CTRL 0x1fd0
+
+#define WIZ_LANEXCTL_STS 0x1fe0
+#define TX0_DISABLE_STATE 0x4
+#define TX0_SLEEP_STATE 0x5
+#define TX0_SNOOZE_STATE 0x6
+#define TX0_ENABLE_STATE 0x7
+
+#define RX0_DISABLE_STATE 0x4
+#define RX0_SLEEP_STATE 0x5
+#define RX0_SNOOZE_STATE 0x6
+#define RX0_ENABLE_STATE 0x7
+
+#define WIZ_PLL_CTRL 0x1ff4
+#define PLL_DISABLE_STATE 0x4
+#define PLL_SLEEP_STATE 0x5
+#define PLL_SNOOZE_STATE 0x6
+#define PLL_ENABLE_STATE 0x7
+
+#define PLL_LOCK_TIME 100000 /* in microseconds */
+#define SLEEP_TIME 100 /* in microseconds */
+
+#define LANE_USB3 0x0
+#define LANE_PCIE0_LANE0 0x1
+
+#define LANE_PCIE1_LANE0 0x0
+#define LANE_PCIE0_LANE1 0x1
+
+#define SERDES_NUM_CLOCKS 3
+
+#define AM654_SERDES_CTRL_CLKSEL_MASK GENMASK(7, 4)
+#define AM654_SERDES_CTRL_CLKSEL_SHIFT 4
+
+struct serdes_am654_clk_mux {
+ struct clk_hw hw;
+ struct regmap *regmap;
+ unsigned int reg;
+ int clk_id;
+ struct clk_init_data clk_data;
+};
+
+#define to_serdes_am654_clk_mux(_hw) \
+ container_of(_hw, struct serdes_am654_clk_mux, hw)
+
+static const struct regmap_config serdes_am654_regmap_config = {
+ .reg_bits = 32,
+ .val_bits = 32,
+ .reg_stride = 4,
+ .fast_io = true,
+ .max_register = 0x1ffc,
+};
+
+enum serdes_am654_fields {
+ /* CMU PLL Control */
+ CMU_PLL_CTRL,
+
+ LANE_PLL_CTRL_RXEQ_RXIDLE,
+
+ /* CMU VCO bias current and VREG setting */
+ AHB_PMA_CM_VCO_VBIAS_VREG,
+ AHB_PMA_CM_VCO_BIAS_VREG,
+
+ AHB_PMA_CM_SR,
+ AHB_SSC_GEN_Z_O_20_13,
+
+ /* AHB PMA Lane Configuration */
+ AHB_PMA_LN_AGC_THSEL_VREGH,
+
+ /* AGC and Signal detect threshold for Gen3 */
+ AHB_PMA_LN_GEN3_AGC_SD_THSEL,
+
+ AHB_PMA_LN_RX_SELR_GEN3,
+ AHB_PMA_LN_TX_DRV,
+
+ /* CMU Master Reset */
+ CMU_MASTER_CDN,
+
+ /* P2S ring buffer initial startup pointer difference */
+ P2S_RBUF_PTR_DIFF,
+
+ CONFIG_VERSION,
+
+ /* Lane 1 Master Reset */
+ L1_MASTER_CDN,
+
+ /* CMU OK Status */
+ CMU_OK_I_0,
+
+ /* Mid-speed initial calibration control */
+ COMRXEQ_MS_INIT_CTRL_7_0,
+
+ /* High-speed initial calibration control */
+ COMRXEQ_HS_INIT_CAL_7_0,
+
+ /* Mid-speed recalibration control */
+ COMRXEQ_MS_RECAL_CTRL_7_0,
+
+ /* High-speed recalibration control */
+ COMRXEQ_HS_RECAL_CTRL_7_0,
+
+ /* ATT configuration */
+ COMRXEQ_CSR_ATT_CONFIG,
+
+ /* Edge based boost adaptation window length */
+ COMRXEQ_CSR_EBSTADAPT_WIN_LEN,
+
+ /* COMRXEQ control 3 & 4 */
+ COMRXEQ_CTRL_3_4,
+
+ /* COMRXEQ control 14, 15 and 16*/
+ COMRXEQ_CTRL_14_15_16,
+
+ /* Threshold for errors in pattern data */
+ COMRXEQ_CSR_DLEV_ERR_THRESH,
+
+ /* COMRXEQ control 25 */
+ COMRXEQ_CTRL_25,
+
+ /* Mid-speed rate change calibration control */
+ CSR_RXEQ_RATE_CHANGE_CAL_RUN_RATE2_O,
+
+ /* High-speed rate change calibration control */
+ COMRXEQ_HS_RCHANGE_CTRL_7_0,
+
+ /* Serdes reset */
+ POR_EN,
+
+ /* Tx Enable Value */
+ TX0_ENABLE,
+
+ /* Rx Enable Value */
+ RX0_ENABLE,
+
+ /* PLL Enable Value */
+ PLL_ENABLE,
+
+ /* PLL ready for use */
+ PLL_OK,
+
+ /* sentinel */
+ MAX_FIELDS
+
+};
+
+static const struct reg_field serdes_am654_reg_fields[] = {
+ [CMU_PLL_CTRL] = REG_FIELD(CMU_R004, 8, 15),
+ [AHB_PMA_CM_VCO_VBIAS_VREG] = REG_FIELD(CMU_R060, 8, 15),
+ [CMU_MASTER_CDN] = REG_FIELD(CMU_R07C, 24, 31),
+ [AHB_PMA_CM_VCO_BIAS_VREG] = REG_FIELD(CMU_R088, 24, 31),
+ [AHB_PMA_CM_SR] = REG_FIELD(CMU_R0D0, 24, 31),
+ [AHB_SSC_GEN_Z_O_20_13] = REG_FIELD(CMU_R0E8, 8, 15),
+ [LANE_PLL_CTRL_RXEQ_RXIDLE] = REG_FIELD(LANE_R048, 8, 15),
+ [AHB_PMA_LN_AGC_THSEL_VREGH] = REG_FIELD(LANE_R058, 16, 23),
+ [AHB_PMA_LN_GEN3_AGC_SD_THSEL] = REG_FIELD(LANE_R06c, 0, 7),
+ [AHB_PMA_LN_RX_SELR_GEN3] = REG_FIELD(LANE_R070, 16, 23),
+ [AHB_PMA_LN_TX_DRV] = REG_FIELD(LANE_R19C, 16, 23),
+ [P2S_RBUF_PTR_DIFF] = REG_FIELD(COMLANE_R004, 0, 7),
+ [CONFIG_VERSION] = REG_FIELD(COMLANE_R138, 16, 23),
+ [L1_MASTER_CDN] = REG_FIELD(COMLANE_R190, 8, 15),
+ [CMU_OK_I_0] = REG_FIELD(COMLANE_R194, 19, 19),
+ [COMRXEQ_MS_INIT_CTRL_7_0] = REG_FIELD(COMRXEQ_R004, 24, 31),
+ [COMRXEQ_HS_INIT_CAL_7_0] = REG_FIELD(COMRXEQ_R008, 0, 7),
+ [COMRXEQ_MS_RECAL_CTRL_7_0] = REG_FIELD(COMRXEQ_R00C, 8, 15),
+ [COMRXEQ_HS_RECAL_CTRL_7_0] = REG_FIELD(COMRXEQ_R00C, 16, 23),
+ [COMRXEQ_CSR_ATT_CONFIG] = REG_FIELD(COMRXEQ_R014, 16, 23),
+ [COMRXEQ_CSR_EBSTADAPT_WIN_LEN] = REG_FIELD(COMRXEQ_R018, 16, 23),
+ [COMRXEQ_CTRL_3_4] = REG_FIELD(COMRXEQ_R01C, 8, 15),
+ [COMRXEQ_CTRL_14_15_16] = REG_FIELD(COMRXEQ_R04C, 0, 7),
+ [COMRXEQ_CSR_DLEV_ERR_THRESH] = REG_FIELD(COMRXEQ_R088, 16, 23),
+ [COMRXEQ_CTRL_25] = REG_FIELD(COMRXEQ_R094, 24, 31),
+ [CSR_RXEQ_RATE_CHANGE_CAL_RUN_RATE2_O] = REG_FIELD(COMRXEQ_R098, 8, 15),
+ [COMRXEQ_HS_RCHANGE_CTRL_7_0] = REG_FIELD(COMRXEQ_R098, 16, 23),
+ [POR_EN] = REG_FIELD(SERDES_CTRL, 29, 29),
+ [TX0_ENABLE] = REG_FIELD(WIZ_LANEXCTL_STS, 29, 31),
+ [RX0_ENABLE] = REG_FIELD(WIZ_LANEXCTL_STS, 13, 15),
+ [PLL_ENABLE] = REG_FIELD(WIZ_PLL_CTRL, 29, 31),
+ [PLL_OK] = REG_FIELD(WIZ_PLL_CTRL, 28, 28),
+};
+
+struct serdes_am654 {
+ struct regmap *regmap;
+ struct regmap_field *fields[MAX_FIELDS];
+
+ struct device *dev;
+ struct mux_control *control;
+ bool busy;
+ u32 type;
+ struct device_node *of_node;
+ struct clk_onecell_data clk_data;
+ struct clk *clks[SERDES_NUM_CLOCKS];
+};
+
+static int serdes_am654_enable_pll(struct serdes_am654 *phy)
+{
+ int ret;
+ u32 val;
+
+ ret = regmap_field_write(phy->fields[PLL_ENABLE], PLL_ENABLE_STATE);
+ if (ret)
+ return ret;
+
+ return regmap_field_read_poll_timeout(phy->fields[PLL_OK], val, val,
+ 1000, PLL_LOCK_TIME);
+}
+
+static void serdes_am654_disable_pll(struct serdes_am654 *phy)
+{
+ struct device *dev = phy->dev;
+ int ret;
+
+ ret = regmap_field_write(phy->fields[PLL_ENABLE], PLL_DISABLE_STATE);
+ if (ret)
+ dev_err(dev, "Failed to disable PLL\n");
+}
+
+static int serdes_am654_enable_txrx(struct serdes_am654 *phy)
+{
+ int ret = 0;
+
+ /* Enable TX */
+ ret |= regmap_field_write(phy->fields[TX0_ENABLE], TX0_ENABLE_STATE);
+
+ /* Enable RX */
+ ret |= regmap_field_write(phy->fields[RX0_ENABLE], RX0_ENABLE_STATE);
+
+ if (ret)
+ return -EIO;
+
+ return 0;
+}
+
+static int serdes_am654_disable_txrx(struct serdes_am654 *phy)
+{
+ int ret = 0;
+
+ /* Disable TX */
+ ret |= regmap_field_write(phy->fields[TX0_ENABLE], TX0_DISABLE_STATE);
+
+ /* Disable RX */
+ ret |= regmap_field_write(phy->fields[RX0_ENABLE], RX0_DISABLE_STATE);
+
+ if (ret)
+ return -EIO;
+
+ return 0;
+}
+
+static int serdes_am654_power_on(struct phy *x)
+{
+ struct serdes_am654 *phy = phy_get_drvdata(x);
+ struct device *dev = phy->dev;
+ int ret;
+ u32 val;
+
+ ret = serdes_am654_enable_pll(phy);
+ if (ret) {
+ dev_err(dev, "Failed to enable PLL\n");
+ return ret;
+ }
+
+ ret = serdes_am654_enable_txrx(phy);
+ if (ret) {
+ dev_err(dev, "Failed to enable TX RX\n");
+ return ret;
+ }
+
+ return regmap_field_read_poll_timeout(phy->fields[CMU_OK_I_0], val,
+ val, SLEEP_TIME, PLL_LOCK_TIME);
+}
+
+static int serdes_am654_power_off(struct phy *x)
+{
+ struct serdes_am654 *phy = phy_get_drvdata(x);
+
+ serdes_am654_disable_txrx(phy);
+ serdes_am654_disable_pll(phy);
+
+ return 0;
+}
+
+#define SERDES_AM654_CFG(offset, a, b, val) \
+ regmap_update_bits(phy->regmap, (offset),\
+ GENMASK((a), (b)), (val) << (b))
+
+static int serdes_am654_usb3_init(struct serdes_am654 *phy)
+{
+ SERDES_AM654_CFG(0x0000, 31, 24, 0x17);
+ SERDES_AM654_CFG(0x0004, 15, 8, 0x02);
+ SERDES_AM654_CFG(0x0004, 7, 0, 0x0e);
+ SERDES_AM654_CFG(0x0008, 23, 16, 0x2e);
+ SERDES_AM654_CFG(0x0008, 31, 24, 0x2e);
+ SERDES_AM654_CFG(0x0060, 7, 0, 0x4b);
+ SERDES_AM654_CFG(0x0060, 15, 8, 0x98);
+ SERDES_AM654_CFG(0x0060, 23, 16, 0x60);
+ SERDES_AM654_CFG(0x00d0, 31, 24, 0x45);
+ SERDES_AM654_CFG(0x00e8, 15, 8, 0x0e);
+ SERDES_AM654_CFG(0x0220, 7, 0, 0x34);
+ SERDES_AM654_CFG(0x0220, 15, 8, 0x34);
+ SERDES_AM654_CFG(0x0220, 31, 24, 0x37);
+ SERDES_AM654_CFG(0x0224, 7, 0, 0x37);
+ SERDES_AM654_CFG(0x0224, 15, 8, 0x37);
+ SERDES_AM654_CFG(0x0228, 23, 16, 0x37);
+ SERDES_AM654_CFG(0x0228, 31, 24, 0x37);
+ SERDES_AM654_CFG(0x022c, 7, 0, 0x37);
+ SERDES_AM654_CFG(0x022c, 15, 8, 0x37);
+ SERDES_AM654_CFG(0x0230, 15, 8, 0x2a);
+ SERDES_AM654_CFG(0x0230, 23, 16, 0x2a);
+ SERDES_AM654_CFG(0x0240, 23, 16, 0x10);
+ SERDES_AM654_CFG(0x0240, 31, 24, 0x34);
+ SERDES_AM654_CFG(0x0244, 7, 0, 0x40);
+ SERDES_AM654_CFG(0x0244, 23, 16, 0x34);
+ SERDES_AM654_CFG(0x0248, 15, 8, 0x0d);
+ SERDES_AM654_CFG(0x0258, 15, 8, 0x16);
+ SERDES_AM654_CFG(0x0258, 23, 16, 0x84);
+ SERDES_AM654_CFG(0x0258, 31, 24, 0xf2);
+ SERDES_AM654_CFG(0x025c, 7, 0, 0x21);
+ SERDES_AM654_CFG(0x0260, 7, 0, 0x27);
+ SERDES_AM654_CFG(0x0260, 15, 8, 0x04);
+ SERDES_AM654_CFG(0x0268, 15, 8, 0x04);
+ SERDES_AM654_CFG(0x0288, 15, 8, 0x2c);
+ SERDES_AM654_CFG(0x0330, 31, 24, 0xa0);
+ SERDES_AM654_CFG(0x0338, 23, 16, 0x03);
+ SERDES_AM654_CFG(0x0338, 31, 24, 0x00);
+ SERDES_AM654_CFG(0x033c, 7, 0, 0x00);
+ SERDES_AM654_CFG(0x0344, 31, 24, 0x18);
+ SERDES_AM654_CFG(0x034c, 7, 0, 0x18);
+ SERDES_AM654_CFG(0x039c, 23, 16, 0x3b);
+ SERDES_AM654_CFG(0x0a04, 7, 0, 0x03);
+ SERDES_AM654_CFG(0x0a14, 31, 24, 0x3c);
+ SERDES_AM654_CFG(0x0a18, 15, 8, 0x3c);
+ SERDES_AM654_CFG(0x0a38, 7, 0, 0x3e);
+ SERDES_AM654_CFG(0x0a38, 15, 8, 0x3e);
+ SERDES_AM654_CFG(0x0ae0, 7, 0, 0x07);
+ SERDES_AM654_CFG(0x0b6c, 23, 16, 0xcd);
+ SERDES_AM654_CFG(0x0b6c, 31, 24, 0x04);
+ SERDES_AM654_CFG(0x0b98, 23, 16, 0x03);
+ SERDES_AM654_CFG(0x1400, 7, 0, 0x3f);
+ SERDES_AM654_CFG(0x1404, 23, 16, 0x6f);
+ SERDES_AM654_CFG(0x1404, 31, 24, 0x6f);
+ SERDES_AM654_CFG(0x140c, 7, 0, 0x6f);
+ SERDES_AM654_CFG(0x140c, 15, 8, 0x6f);
+ SERDES_AM654_CFG(0x1410, 15, 8, 0x27);
+ SERDES_AM654_CFG(0x1414, 7, 0, 0x0c);
+ SERDES_AM654_CFG(0x1414, 23, 16, 0x07);
+ SERDES_AM654_CFG(0x1418, 23, 16, 0x40);
+ SERDES_AM654_CFG(0x141c, 7, 0, 0x00);
+ SERDES_AM654_CFG(0x141c, 15, 8, 0x1f);
+ SERDES_AM654_CFG(0x1428, 31, 24, 0x08);
+ SERDES_AM654_CFG(0x1434, 31, 24, 0x00);
+ SERDES_AM654_CFG(0x1444, 7, 0, 0x94);
+ SERDES_AM654_CFG(0x1460, 31, 24, 0x7f);
+ SERDES_AM654_CFG(0x1464, 7, 0, 0x43);
+ SERDES_AM654_CFG(0x1464, 23, 16, 0x6f);
+ SERDES_AM654_CFG(0x1464, 31, 24, 0x43);
+ SERDES_AM654_CFG(0x1484, 23, 16, 0x8f);
+ SERDES_AM654_CFG(0x1498, 7, 0, 0x4f);
+ SERDES_AM654_CFG(0x1498, 23, 16, 0x4f);
+ SERDES_AM654_CFG(0x007c, 31, 24, 0x0d);
+ SERDES_AM654_CFG(0x0b90, 15, 8, 0x0f);
+
+ return 0;
+}
+
+static int serdes_am654_pcie_init(struct serdes_am654 *phy)
+{
+ int ret = 0;
+
+ ret |= regmap_field_write(phy->fields[CMU_PLL_CTRL], 0x2);
+ ret |= regmap_field_write(phy->fields[AHB_PMA_CM_VCO_VBIAS_VREG], 0x98);
+ ret |= regmap_field_write(phy->fields[AHB_PMA_CM_VCO_BIAS_VREG], 0x98);
+ ret |= regmap_field_write(phy->fields[AHB_PMA_CM_SR], 0x45);
+ ret |= regmap_field_write(phy->fields[AHB_SSC_GEN_Z_O_20_13], 0xe);
+ ret |= regmap_field_write(phy->fields[LANE_PLL_CTRL_RXEQ_RXIDLE], 0x5);
+ ret |= regmap_field_write(phy->fields[AHB_PMA_LN_AGC_THSEL_VREGH], 0x83);
+ ret |= regmap_field_write(phy->fields[AHB_PMA_LN_GEN3_AGC_SD_THSEL], 0x83);
+ ret |= regmap_field_write(phy->fields[AHB_PMA_LN_RX_SELR_GEN3], 0x81);
+ ret |= regmap_field_write(phy->fields[AHB_PMA_LN_TX_DRV], 0x3b);
+ ret |= regmap_field_write(phy->fields[P2S_RBUF_PTR_DIFF], 0x3);
+ ret |= regmap_field_write(phy->fields[CONFIG_VERSION], VERSION_VAL);
+ ret |= regmap_field_write(phy->fields[COMRXEQ_MS_INIT_CTRL_7_0], 0xf);
+ ret |= regmap_field_write(phy->fields[COMRXEQ_HS_INIT_CAL_7_0], 0x4f);
+ ret |= regmap_field_write(phy->fields[COMRXEQ_MS_RECAL_CTRL_7_0], 0xf);
+ ret |= regmap_field_write(phy->fields[COMRXEQ_HS_RECAL_CTRL_7_0], 0x4f);
+ ret |= regmap_field_write(phy->fields[COMRXEQ_CSR_ATT_CONFIG], 0x7);
+ ret |= regmap_field_write(phy->fields[COMRXEQ_CSR_EBSTADAPT_WIN_LEN], 0x7f);
+ ret |= regmap_field_write(phy->fields[COMRXEQ_CTRL_3_4], 0xf);
+ ret |= regmap_field_write(phy->fields[COMRXEQ_CTRL_14_15_16], 0x9a);
+ ret |= regmap_field_write(phy->fields[COMRXEQ_CSR_DLEV_ERR_THRESH], 0x32);
+ ret |= regmap_field_write(phy->fields[COMRXEQ_CTRL_25], 0x80);
+ ret |= regmap_field_write(phy->fields[CSR_RXEQ_RATE_CHANGE_CAL_RUN_RATE2_O], 0xf);
+ ret |= regmap_field_write(phy->fields[COMRXEQ_HS_RCHANGE_CTRL_7_0], 0x4f);
+ ret |= regmap_field_write(phy->fields[CMU_MASTER_CDN], 0x1);
+ ret |= regmap_field_write(phy->fields[L1_MASTER_CDN], 0x2);
+
+ if (ret)
+ return -EIO;
+
+ return 0;
+}
+
+static int serdes_am654_init(struct phy *x)
+{
+ struct serdes_am654 *phy = phy_get_drvdata(x);
+
+ switch (phy->type) {
+ case PHY_TYPE_PCIE:
+ return serdes_am654_pcie_init(phy);
+ case PHY_TYPE_USB3:
+ return serdes_am654_usb3_init(phy);
+ default:
+ return -EINVAL;
+ }
+}
+
+static int serdes_am654_reset(struct phy *x)
+{
+ struct serdes_am654 *phy = phy_get_drvdata(x);
+ int ret = 0;
+
+ serdes_am654_disable_pll(phy);
+ serdes_am654_disable_txrx(phy);
+
+ ret |= regmap_field_write(phy->fields[POR_EN], 0x1);
+
+ mdelay(1);
+
+ ret |= regmap_field_write(phy->fields[POR_EN], 0x0);
+
+ if (ret)
+ return -EIO;
+
+ return 0;
+}
+
+static void serdes_am654_release(struct phy *x)
+{
+ struct serdes_am654 *phy = phy_get_drvdata(x);
+
+ phy->type = PHY_NONE;
+ phy->busy = false;
+ mux_control_deselect(phy->control);
+}
+
+static struct phy *serdes_am654_xlate(struct device *dev,
+ struct of_phandle_args *args)
+{
+ struct serdes_am654 *am654_phy;
+ struct phy *phy;
+ int ret;
+
+ phy = of_phy_simple_xlate(dev, args);
+ if (IS_ERR(phy))
+ return phy;
+
+ am654_phy = phy_get_drvdata(phy);
+ if (am654_phy->busy)
+ return ERR_PTR(-EBUSY);
+
+ ret = mux_control_select(am654_phy->control, args->args[1]);
+ if (ret) {
+ dev_err(dev, "Failed to select SERDES Lane Function\n");
+ return ERR_PTR(ret);
+ }
+
+ am654_phy->busy = true;
+ am654_phy->type = args->args[0];
+
+ return phy;
+}
+
+static const struct phy_ops ops = {
+ .reset = serdes_am654_reset,
+ .init = serdes_am654_init,
+ .power_on = serdes_am654_power_on,
+ .power_off = serdes_am654_power_off,
+ .release = serdes_am654_release,
+ .owner = THIS_MODULE,
+};
+
+#define SERDES_NUM_MUX_COMBINATIONS 16
+
+#define LICLK 0
+#define EXT_REFCLK 1
+#define RICLK 2
+
+static const int
+serdes_am654_mux_table[SERDES_NUM_MUX_COMBINATIONS][SERDES_NUM_CLOCKS] = {
+ /*
+ * Each combination maps to one of
+ * "Figure 12-1986. SerDes Reference Clock Distribution"
+ * in TRM.
+ */
+ /* Parent of CMU refclk, Left output, Right output
+ * either of EXT_REFCLK, LICLK, RICLK
+ */
+ { EXT_REFCLK, EXT_REFCLK, EXT_REFCLK }, /* 0000 */
+ { RICLK, EXT_REFCLK, EXT_REFCLK }, /* 0001 */
+ { EXT_REFCLK, RICLK, LICLK }, /* 0010 */
+ { RICLK, RICLK, EXT_REFCLK }, /* 0011 */
+ { LICLK, EXT_REFCLK, EXT_REFCLK }, /* 0100 */
+ { EXT_REFCLK, EXT_REFCLK, EXT_REFCLK }, /* 0101 */
+ { LICLK, RICLK, LICLK }, /* 0110 */
+ { EXT_REFCLK, RICLK, LICLK }, /* 0111 */
+ { EXT_REFCLK, EXT_REFCLK, LICLK }, /* 1000 */
+ { RICLK, EXT_REFCLK, LICLK }, /* 1001 */
+ { EXT_REFCLK, RICLK, EXT_REFCLK }, /* 1010 */
+ { RICLK, RICLK, EXT_REFCLK }, /* 1011 */
+ { LICLK, EXT_REFCLK, LICLK }, /* 1100 */
+ { EXT_REFCLK, EXT_REFCLK, LICLK }, /* 1101 */
+ { LICLK, RICLK, EXT_REFCLK }, /* 1110 */
+ { EXT_REFCLK, RICLK, EXT_REFCLK }, /* 1111 */
+};
+
+static u8 serdes_am654_clk_mux_get_parent(struct clk_hw *hw)
+{
+ struct serdes_am654_clk_mux *mux = to_serdes_am654_clk_mux(hw);
+ struct regmap *regmap = mux->regmap;
+ unsigned int reg = mux->reg;
+ unsigned int val;
+
+ regmap_read(regmap, reg, &val);
+ val &= AM654_SERDES_CTRL_CLKSEL_MASK;
+ val >>= AM654_SERDES_CTRL_CLKSEL_SHIFT;
+
+ return serdes_am654_mux_table[val][mux->clk_id];
+}
+
+static int serdes_am654_clk_mux_set_parent(struct clk_hw *hw, u8 index)
+{
+ struct serdes_am654_clk_mux *mux = to_serdes_am654_clk_mux(hw);
+ struct regmap *regmap = mux->regmap;
+ const char *name = clk_hw_get_name(hw);
+ unsigned int reg = mux->reg;
+ int clk_id = mux->clk_id;
+ int parents[SERDES_NUM_CLOCKS];
+ const int *p;
+ u32 val;
+ int found, i;
+ int ret;
+
+ /* get existing setting */
+ regmap_read(regmap, reg, &val);
+ val &= AM654_SERDES_CTRL_CLKSEL_MASK;
+ val >>= AM654_SERDES_CTRL_CLKSEL_SHIFT;
+
+ for (i = 0; i < SERDES_NUM_CLOCKS; i++)
+ parents[i] = serdes_am654_mux_table[val][i];
+
+ /* change parent of this clock. others left intact */
+ parents[clk_id] = index;
+
+ /* Find the match */
+ for (val = 0; val < SERDES_NUM_MUX_COMBINATIONS; val++) {
+ p = serdes_am654_mux_table[val];
+ found = 1;
+ for (i = 0; i < SERDES_NUM_CLOCKS; i++) {
+ if (parents[i] != p[i]) {
+ found = 0;
+ break;
+ }
+ }
+
+ if (found)
+ break;
+ }
+
+ if (!found) {
+ /*
+ * This can never happen, unless we missed
+ * a valid combination in serdes_am654_mux_table.
+ */
+ WARN(1, "Failed to find the parent of %s clock\n", name);
+ return -EINVAL;
+ }
+
+ val <<= AM654_SERDES_CTRL_CLKSEL_SHIFT;
+ ret = regmap_update_bits(regmap, reg, AM654_SERDES_CTRL_CLKSEL_MASK,
+ val);
+
+ return ret;
+}
+
+static const struct clk_ops serdes_am654_clk_mux_ops = {
+ .set_parent = serdes_am654_clk_mux_set_parent,
+ .get_parent = serdes_am654_clk_mux_get_parent,
+};
+
+static int serdes_am654_clk_register(struct serdes_am654 *am654_phy,
+ const char *clock_name, int clock_num)
+{
+ struct device_node *node = am654_phy->of_node;
+ struct device *dev = am654_phy->dev;
+ struct serdes_am654_clk_mux *mux;
+ struct device_node *regmap_node;
+ const char **parent_names;
+ struct clk_init_data *init;
+ unsigned int num_parents;
+ struct regmap *regmap;
+ const __be32 *addr;
+ unsigned int reg;
+ struct clk *clk;
+ int ret = 0;
+
+ mux = devm_kzalloc(dev, sizeof(*mux), GFP_KERNEL);
+ if (!mux)
+ return -ENOMEM;
+
+ init = &mux->clk_data;
+
+ regmap_node = of_parse_phandle(node, "ti,serdes-clk", 0);
+ if (!regmap_node) {
+ dev_err(dev, "Fail to get serdes-clk node\n");
+ ret = -ENODEV;
+ goto out_put_node;
+ }
+
+ regmap = syscon_node_to_regmap(regmap_node->parent);
+ if (IS_ERR(regmap)) {
+ dev_err(dev, "Fail to get Syscon regmap\n");
+ ret = PTR_ERR(regmap);
+ goto out_put_node;
+ }
+
+ num_parents = of_clk_get_parent_count(node);
+ if (num_parents < 2) {
+ dev_err(dev, "SERDES clock must have parents\n");
+ ret = -EINVAL;
+ goto out_put_node;
+ }
+
+ parent_names = devm_kzalloc(dev, (sizeof(char *) * num_parents),
+ GFP_KERNEL);
+ if (!parent_names) {
+ ret = -ENOMEM;
+ goto out_put_node;
+ }
+
+ of_clk_parent_fill(node, parent_names, num_parents);
+
+ addr = of_get_address(regmap_node, 0, NULL, NULL);
+ if (!addr) {
+ ret = -EINVAL;
+ goto out_put_node;
+ }
+
+ reg = be32_to_cpu(*addr);
+
+ init->ops = &serdes_am654_clk_mux_ops;
+ init->flags = CLK_SET_RATE_NO_REPARENT;
+ init->parent_names = parent_names;
+ init->num_parents = num_parents;
+ init->name = clock_name;
+
+ mux->regmap = regmap;
+ mux->reg = reg;
+ mux->clk_id = clock_num;
+ mux->hw.init = init;
+
+ clk = devm_clk_register(dev, &mux->hw);
+ if (IS_ERR(clk)) {
+ ret = PTR_ERR(clk);
+ goto out_put_node;
+ }
+
+ am654_phy->clks[clock_num] = clk;
+
+out_put_node:
+ of_node_put(regmap_node);
+ return ret;
+}
+
+static const struct of_device_id serdes_am654_id_table[] = {
+ {
+ .compatible = "ti,phy-am654-serdes",
+ },
+ {}
+};
+MODULE_DEVICE_TABLE(of, serdes_am654_id_table);
+
+static int serdes_am654_regfield_init(struct serdes_am654 *am654_phy)
+{
+ struct regmap *regmap = am654_phy->regmap;
+ struct device *dev = am654_phy->dev;
+ int i;
+
+ for (i = 0; i < MAX_FIELDS; i++) {
+ am654_phy->fields[i] = devm_regmap_field_alloc(dev,
+ regmap,
+ serdes_am654_reg_fields[i]);
+ if (IS_ERR(am654_phy->fields[i])) {
+ dev_err(dev, "Unable to allocate regmap field %d\n", i);
+ return PTR_ERR(am654_phy->fields[i]);
+ }
+ }
+
+ return 0;
+}
+
+static int serdes_am654_probe(struct platform_device *pdev)
+{
+ struct phy_provider *phy_provider;
+ struct device *dev = &pdev->dev;
+ struct device_node *node = dev->of_node;
+ struct clk_onecell_data *clk_data;
+ struct serdes_am654 *am654_phy;
+ struct mux_control *control;
+ const char *clock_name;
+ struct regmap *regmap;
+ void __iomem *base;
+ struct phy *phy;
+ int ret;
+ int i;
+
+ am654_phy = devm_kzalloc(dev, sizeof(*am654_phy), GFP_KERNEL);
+ if (!am654_phy)
+ return -ENOMEM;
+
+ base = devm_platform_ioremap_resource(pdev, 0);
+ if (IS_ERR(base))
+ return PTR_ERR(base);
+
+ regmap = devm_regmap_init_mmio(dev, base, &serdes_am654_regmap_config);
+ if (IS_ERR(regmap)) {
+ dev_err(dev, "Failed to initialize regmap\n");
+ return PTR_ERR(regmap);
+ }
+
+ control = devm_mux_control_get(dev, NULL);
+ if (IS_ERR(control))
+ return PTR_ERR(control);
+
+ am654_phy->dev = dev;
+ am654_phy->of_node = node;
+ am654_phy->regmap = regmap;
+ am654_phy->control = control;
+ am654_phy->type = PHY_NONE;
+
+ ret = serdes_am654_regfield_init(am654_phy);
+ if (ret) {
+ dev_err(dev, "Failed to initialize regfields\n");
+ return ret;
+ }
+
+ platform_set_drvdata(pdev, am654_phy);
+
+ for (i = 0; i < SERDES_NUM_CLOCKS; i++) {
+ ret = of_property_read_string_index(node, "clock-output-names",
+ i, &clock_name);
+ if (ret) {
+ dev_err(dev, "Failed to get clock name\n");
+ return ret;
+ }
+
+ ret = serdes_am654_clk_register(am654_phy, clock_name, i);
+ if (ret) {
+ dev_err(dev, "Failed to initialize clock %s\n",
+ clock_name);
+ return ret;
+ }
+ }
+
+ clk_data = &am654_phy->clk_data;
+ clk_data->clks = am654_phy->clks;
+ clk_data->clk_num = SERDES_NUM_CLOCKS;
+ ret = of_clk_add_provider(node, of_clk_src_onecell_get, clk_data);
+ if (ret)
+ return ret;
+
+ pm_runtime_enable(dev);
+
+ phy = devm_phy_create(dev, NULL, &ops);
+ if (IS_ERR(phy)) {
+ ret = PTR_ERR(phy);
+ goto clk_err;
+ }
+
+ phy_set_drvdata(phy, am654_phy);
+ phy_provider = devm_of_phy_provider_register(dev, serdes_am654_xlate);
+ if (IS_ERR(phy_provider)) {
+ ret = PTR_ERR(phy_provider);
+ goto clk_err;
+ }
+
+ return 0;
+
+clk_err:
+ of_clk_del_provider(node);
+ pm_runtime_disable(dev);
+ return ret;
+}
+
+static int serdes_am654_remove(struct platform_device *pdev)
+{
+ struct serdes_am654 *am654_phy = platform_get_drvdata(pdev);
+ struct device_node *node = am654_phy->of_node;
+
+ pm_runtime_disable(&pdev->dev);
+ of_clk_del_provider(node);
+
+ return 0;
+}
+
+static struct platform_driver serdes_am654_driver = {
+ .probe = serdes_am654_probe,
+ .remove = serdes_am654_remove,
+ .driver = {
+ .name = "phy-am654",
+ .of_match_table = serdes_am654_id_table,
+ },
+};
+module_platform_driver(serdes_am654_driver);
+
+MODULE_AUTHOR("Texas Instruments Inc.");
+MODULE_DESCRIPTION("TI AM654x SERDES driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/phy/ti/phy-da8xx-usb.c b/drivers/phy/ti/phy-da8xx-usb.c
new file mode 100644
index 000000000..83bc0a9af
--- /dev/null
+++ b/drivers/phy/ti/phy-da8xx-usb.c
@@ -0,0 +1,246 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * phy-da8xx-usb - TI DaVinci DA8xx USB PHY driver
+ *
+ * Copyright (C) 2016 David Lechner <david@lechnology.com>
+ */
+
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/mfd/da8xx-cfgchip.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_data/phy-da8xx-usb.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+#define PHY_INIT_BITS (CFGCHIP2_SESENDEN | CFGCHIP2_VBDTCTEN)
+
+struct da8xx_usb_phy {
+ struct phy_provider *phy_provider;
+ struct phy *usb11_phy;
+ struct phy *usb20_phy;
+ struct clk *usb11_clk;
+ struct clk *usb20_clk;
+ struct regmap *regmap;
+};
+
+static int da8xx_usb11_phy_power_on(struct phy *phy)
+{
+ struct da8xx_usb_phy *d_phy = phy_get_drvdata(phy);
+ int ret;
+
+ ret = clk_prepare_enable(d_phy->usb11_clk);
+ if (ret)
+ return ret;
+
+ regmap_write_bits(d_phy->regmap, CFGCHIP(2), CFGCHIP2_USB1SUSPENDM,
+ CFGCHIP2_USB1SUSPENDM);
+
+ return 0;
+}
+
+static int da8xx_usb11_phy_power_off(struct phy *phy)
+{
+ struct da8xx_usb_phy *d_phy = phy_get_drvdata(phy);
+
+ regmap_write_bits(d_phy->regmap, CFGCHIP(2), CFGCHIP2_USB1SUSPENDM, 0);
+
+ clk_disable_unprepare(d_phy->usb11_clk);
+
+ return 0;
+}
+
+static const struct phy_ops da8xx_usb11_phy_ops = {
+ .power_on = da8xx_usb11_phy_power_on,
+ .power_off = da8xx_usb11_phy_power_off,
+ .owner = THIS_MODULE,
+};
+
+static int da8xx_usb20_phy_power_on(struct phy *phy)
+{
+ struct da8xx_usb_phy *d_phy = phy_get_drvdata(phy);
+ int ret;
+
+ ret = clk_prepare_enable(d_phy->usb20_clk);
+ if (ret)
+ return ret;
+
+ regmap_write_bits(d_phy->regmap, CFGCHIP(2), CFGCHIP2_OTGPWRDN, 0);
+
+ return 0;
+}
+
+static int da8xx_usb20_phy_power_off(struct phy *phy)
+{
+ struct da8xx_usb_phy *d_phy = phy_get_drvdata(phy);
+
+ regmap_write_bits(d_phy->regmap, CFGCHIP(2), CFGCHIP2_OTGPWRDN,
+ CFGCHIP2_OTGPWRDN);
+
+ clk_disable_unprepare(d_phy->usb20_clk);
+
+ return 0;
+}
+
+static int da8xx_usb20_phy_set_mode(struct phy *phy,
+ enum phy_mode mode, int submode)
+{
+ struct da8xx_usb_phy *d_phy = phy_get_drvdata(phy);
+ u32 val;
+
+ switch (mode) {
+ case PHY_MODE_USB_HOST: /* Force VBUS valid, ID = 0 */
+ val = CFGCHIP2_OTGMODE_FORCE_HOST;
+ break;
+ case PHY_MODE_USB_DEVICE: /* Force VBUS valid, ID = 1 */
+ val = CFGCHIP2_OTGMODE_FORCE_DEVICE;
+ break;
+ case PHY_MODE_USB_OTG: /* Don't override the VBUS/ID comparators */
+ val = CFGCHIP2_OTGMODE_NO_OVERRIDE;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ regmap_write_bits(d_phy->regmap, CFGCHIP(2), CFGCHIP2_OTGMODE_MASK,
+ val);
+
+ return 0;
+}
+
+static const struct phy_ops da8xx_usb20_phy_ops = {
+ .power_on = da8xx_usb20_phy_power_on,
+ .power_off = da8xx_usb20_phy_power_off,
+ .set_mode = da8xx_usb20_phy_set_mode,
+ .owner = THIS_MODULE,
+};
+
+static struct phy *da8xx_usb_phy_of_xlate(struct device *dev,
+ struct of_phandle_args *args)
+{
+ struct da8xx_usb_phy *d_phy = dev_get_drvdata(dev);
+
+ if (!d_phy)
+ return ERR_PTR(-ENODEV);
+
+ switch (args->args[0]) {
+ case 0:
+ return d_phy->usb20_phy;
+ case 1:
+ return d_phy->usb11_phy;
+ default:
+ return ERR_PTR(-EINVAL);
+ }
+}
+
+static int da8xx_usb_phy_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct da8xx_usb_phy_platform_data *pdata = dev->platform_data;
+ struct device_node *node = dev->of_node;
+ struct da8xx_usb_phy *d_phy;
+
+ d_phy = devm_kzalloc(dev, sizeof(*d_phy), GFP_KERNEL);
+ if (!d_phy)
+ return -ENOMEM;
+
+ if (pdata)
+ d_phy->regmap = pdata->cfgchip;
+ else
+ d_phy->regmap = syscon_regmap_lookup_by_compatible(
+ "ti,da830-cfgchip");
+ if (IS_ERR(d_phy->regmap)) {
+ dev_err(dev, "Failed to get syscon\n");
+ return PTR_ERR(d_phy->regmap);
+ }
+
+ d_phy->usb11_clk = devm_clk_get(dev, "usb1_clk48");
+ if (IS_ERR(d_phy->usb11_clk)) {
+ dev_err(dev, "Failed to get usb1_clk48\n");
+ return PTR_ERR(d_phy->usb11_clk);
+ }
+
+ d_phy->usb20_clk = devm_clk_get(dev, "usb0_clk48");
+ if (IS_ERR(d_phy->usb20_clk)) {
+ dev_err(dev, "Failed to get usb0_clk48\n");
+ return PTR_ERR(d_phy->usb20_clk);
+ }
+
+ d_phy->usb11_phy = devm_phy_create(dev, node, &da8xx_usb11_phy_ops);
+ if (IS_ERR(d_phy->usb11_phy)) {
+ dev_err(dev, "Failed to create usb11 phy\n");
+ return PTR_ERR(d_phy->usb11_phy);
+ }
+
+ d_phy->usb20_phy = devm_phy_create(dev, node, &da8xx_usb20_phy_ops);
+ if (IS_ERR(d_phy->usb20_phy)) {
+ dev_err(dev, "Failed to create usb20 phy\n");
+ return PTR_ERR(d_phy->usb20_phy);
+ }
+
+ platform_set_drvdata(pdev, d_phy);
+ phy_set_drvdata(d_phy->usb11_phy, d_phy);
+ phy_set_drvdata(d_phy->usb20_phy, d_phy);
+
+ if (node) {
+ d_phy->phy_provider = devm_of_phy_provider_register(dev,
+ da8xx_usb_phy_of_xlate);
+ if (IS_ERR(d_phy->phy_provider)) {
+ dev_err(dev, "Failed to create phy provider\n");
+ return PTR_ERR(d_phy->phy_provider);
+ }
+ } else {
+ int ret;
+
+ ret = phy_create_lookup(d_phy->usb11_phy, "usb-phy",
+ "ohci-da8xx");
+ if (ret)
+ dev_warn(dev, "Failed to create usb11 phy lookup\n");
+ ret = phy_create_lookup(d_phy->usb20_phy, "usb-phy",
+ "musb-da8xx");
+ if (ret)
+ dev_warn(dev, "Failed to create usb20 phy lookup\n");
+ }
+
+ regmap_write_bits(d_phy->regmap, CFGCHIP(2),
+ PHY_INIT_BITS, PHY_INIT_BITS);
+
+ return 0;
+}
+
+static int da8xx_usb_phy_remove(struct platform_device *pdev)
+{
+ struct da8xx_usb_phy *d_phy = platform_get_drvdata(pdev);
+
+ if (!pdev->dev.of_node) {
+ phy_remove_lookup(d_phy->usb20_phy, "usb-phy", "musb-da8xx");
+ phy_remove_lookup(d_phy->usb11_phy, "usb-phy", "ohci-da8xx");
+ }
+
+ return 0;
+}
+
+static const struct of_device_id da8xx_usb_phy_ids[] = {
+ { .compatible = "ti,da830-usb-phy" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, da8xx_usb_phy_ids);
+
+static struct platform_driver da8xx_usb_phy_driver = {
+ .probe = da8xx_usb_phy_probe,
+ .remove = da8xx_usb_phy_remove,
+ .driver = {
+ .name = "da8xx-usb-phy",
+ .of_match_table = da8xx_usb_phy_ids,
+ },
+};
+
+module_platform_driver(da8xx_usb_phy_driver);
+
+MODULE_ALIAS("platform:da8xx-usb-phy");
+MODULE_AUTHOR("David Lechner <david@lechnology.com>");
+MODULE_DESCRIPTION("TI DA8xx USB PHY driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/phy/ti/phy-dm816x-usb.c b/drivers/phy/ti/phy-dm816x-usb.c
new file mode 100644
index 000000000..9fe6ea6fd
--- /dev/null
+++ b/drivers/phy/ti/phy-dm816x-usb.c
@@ -0,0 +1,295 @@
+/*
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+#include <linux/slab.h>
+#include <linux/of.h>
+#include <linux/io.h>
+#include <linux/usb/phy_companion.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/pm_runtime.h>
+#include <linux/delay.h>
+#include <linux/phy/phy.h>
+#include <linux/of_platform.h>
+
+#include <linux/mfd/syscon.h>
+
+/*
+ * TRM has two sets of USB_CTRL registers.. The correct register bits
+ * are in TRM section 24.9.8.2 USB_CTRL Register. The TRM documents the
+ * phy as being SR70LX Synopsys USB 2.0 OTG nanoPHY. It also seems at
+ * least dm816x rev c ignores writes to USB_CTRL register, but the TI
+ * kernel is writing to those so it's possible that later revisions
+ * have worknig USB_CTRL register.
+ *
+ * Also note that At least USB_CTRL register seems to be dm816x specific
+ * according to the TRM. It's possible that USBPHY_CTRL is more generic,
+ * but that would have to be checked against the SR70LX documentation
+ * which does not seem to be publicly available.
+ *
+ * Finally, the phy on dm814x and am335x is different from dm816x.
+ */
+#define DM816X_USB_CTRL_PHYCLKSRC BIT(8) /* 1 = PLL ref clock */
+#define DM816X_USB_CTRL_PHYSLEEP1 BIT(1) /* Enable the first phy */
+#define DM816X_USB_CTRL_PHYSLEEP0 BIT(0) /* Enable the second phy */
+
+#define DM816X_USBPHY_CTRL_TXRISETUNE 1
+#define DM816X_USBPHY_CTRL_TXVREFTUNE 0xc
+#define DM816X_USBPHY_CTRL_TXPREEMTUNE 0x2
+
+struct dm816x_usb_phy {
+ struct regmap *syscon;
+ struct device *dev;
+ unsigned int instance;
+ struct clk *refclk;
+ struct usb_phy phy;
+ unsigned int usb_ctrl; /* Shared between phy0 and phy1 */
+ unsigned int usbphy_ctrl;
+};
+
+static int dm816x_usb_phy_set_host(struct usb_otg *otg, struct usb_bus *host)
+{
+ otg->host = host;
+ if (!host)
+ otg->state = OTG_STATE_UNDEFINED;
+
+ return 0;
+}
+
+static int dm816x_usb_phy_set_peripheral(struct usb_otg *otg,
+ struct usb_gadget *gadget)
+{
+ otg->gadget = gadget;
+ if (!gadget)
+ otg->state = OTG_STATE_UNDEFINED;
+
+ return 0;
+}
+
+static int dm816x_usb_phy_init(struct phy *x)
+{
+ struct dm816x_usb_phy *phy = phy_get_drvdata(x);
+ unsigned int val;
+
+ if (clk_get_rate(phy->refclk) != 24000000)
+ dev_warn(phy->dev, "nonstandard phy refclk\n");
+
+ /* Set PLL ref clock and put phys to sleep */
+ regmap_update_bits(phy->syscon, phy->usb_ctrl,
+ DM816X_USB_CTRL_PHYCLKSRC |
+ DM816X_USB_CTRL_PHYSLEEP1 |
+ DM816X_USB_CTRL_PHYSLEEP0,
+ 0);
+ regmap_read(phy->syscon, phy->usb_ctrl, &val);
+ if ((val & 3) != 0)
+ dev_info(phy->dev,
+ "Working dm816x USB_CTRL! (0x%08x)\n",
+ val);
+
+ /*
+ * TI kernel sets these values for "symmetrical eye diagram and
+ * better signal quality" so let's assume somebody checked the
+ * values with a scope and set them here too.
+ */
+ regmap_read(phy->syscon, phy->usbphy_ctrl, &val);
+ val |= DM816X_USBPHY_CTRL_TXRISETUNE |
+ DM816X_USBPHY_CTRL_TXVREFTUNE |
+ DM816X_USBPHY_CTRL_TXPREEMTUNE;
+ regmap_write(phy->syscon, phy->usbphy_ctrl, val);
+
+ return 0;
+}
+
+static const struct phy_ops ops = {
+ .init = dm816x_usb_phy_init,
+ .owner = THIS_MODULE,
+};
+
+static int __maybe_unused dm816x_usb_phy_runtime_suspend(struct device *dev)
+{
+ struct dm816x_usb_phy *phy = dev_get_drvdata(dev);
+ unsigned int mask, val;
+ int error = 0;
+
+ mask = BIT(phy->instance);
+ val = ~BIT(phy->instance);
+ error = regmap_update_bits(phy->syscon, phy->usb_ctrl,
+ mask, val);
+ if (error)
+ dev_err(phy->dev, "phy%i failed to power off\n",
+ phy->instance);
+ clk_disable(phy->refclk);
+
+ return 0;
+}
+
+static int __maybe_unused dm816x_usb_phy_runtime_resume(struct device *dev)
+{
+ struct dm816x_usb_phy *phy = dev_get_drvdata(dev);
+ unsigned int mask, val;
+ int error;
+
+ error = clk_enable(phy->refclk);
+ if (error)
+ return error;
+
+ /*
+ * Note that at least dm816x rev c does not seem to do
+ * anything with the USB_CTRL register. But let's follow
+ * what the TI tree is doing in case later revisions use
+ * USB_CTRL.
+ */
+ mask = BIT(phy->instance);
+ val = BIT(phy->instance);
+ error = regmap_update_bits(phy->syscon, phy->usb_ctrl,
+ mask, val);
+ if (error) {
+ dev_err(phy->dev, "phy%i failed to power on\n",
+ phy->instance);
+ clk_disable(phy->refclk);
+ return error;
+ }
+
+ return 0;
+}
+
+static UNIVERSAL_DEV_PM_OPS(dm816x_usb_phy_pm_ops,
+ dm816x_usb_phy_runtime_suspend,
+ dm816x_usb_phy_runtime_resume,
+ NULL);
+
+#ifdef CONFIG_OF
+static const struct of_device_id dm816x_usb_phy_id_table[] = {
+ {
+ .compatible = "ti,dm8168-usb-phy",
+ },
+ {},
+};
+MODULE_DEVICE_TABLE(of, dm816x_usb_phy_id_table);
+#endif
+
+static int dm816x_usb_phy_probe(struct platform_device *pdev)
+{
+ struct dm816x_usb_phy *phy;
+ struct resource *res;
+ struct phy *generic_phy;
+ struct phy_provider *phy_provider;
+ struct usb_otg *otg;
+ const struct of_device_id *of_id;
+ int error;
+
+ of_id = of_match_device(of_match_ptr(dm816x_usb_phy_id_table),
+ &pdev->dev);
+ if (!of_id)
+ return -EINVAL;
+
+ phy = devm_kzalloc(&pdev->dev, sizeof(*phy), GFP_KERNEL);
+ if (!phy)
+ return -ENOMEM;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res)
+ return -ENOENT;
+
+ phy->syscon = syscon_regmap_lookup_by_phandle(pdev->dev.of_node,
+ "syscon");
+ if (IS_ERR(phy->syscon))
+ return PTR_ERR(phy->syscon);
+
+ /*
+ * According to sprs614e.pdf, the first usb_ctrl is shared and
+ * the second instance for usb_ctrl is reserved.. Also the
+ * register bits are different from earlier TRMs.
+ */
+ phy->usb_ctrl = 0x20;
+ phy->usbphy_ctrl = (res->start & 0xff) + 4;
+ if (phy->usbphy_ctrl == 0x2c)
+ phy->instance = 1;
+
+ otg = devm_kzalloc(&pdev->dev, sizeof(*otg), GFP_KERNEL);
+ if (!otg)
+ return -ENOMEM;
+
+ phy->dev = &pdev->dev;
+ phy->phy.dev = phy->dev;
+ phy->phy.label = "dm8168_usb_phy";
+ phy->phy.otg = otg;
+ phy->phy.type = USB_PHY_TYPE_USB2;
+ otg->set_host = dm816x_usb_phy_set_host;
+ otg->set_peripheral = dm816x_usb_phy_set_peripheral;
+ otg->usb_phy = &phy->phy;
+
+ platform_set_drvdata(pdev, phy);
+
+ phy->refclk = devm_clk_get(phy->dev, "refclk");
+ if (IS_ERR(phy->refclk))
+ return PTR_ERR(phy->refclk);
+ error = clk_prepare(phy->refclk);
+ if (error)
+ return error;
+
+ pm_runtime_enable(phy->dev);
+ generic_phy = devm_phy_create(phy->dev, NULL, &ops);
+ if (IS_ERR(generic_phy)) {
+ error = PTR_ERR(generic_phy);
+ goto clk_unprepare;
+ }
+
+ phy_set_drvdata(generic_phy, phy);
+
+ phy_provider = devm_of_phy_provider_register(phy->dev,
+ of_phy_simple_xlate);
+ if (IS_ERR(phy_provider)) {
+ error = PTR_ERR(phy_provider);
+ goto clk_unprepare;
+ }
+
+ usb_add_phy_dev(&phy->phy);
+
+ return 0;
+
+clk_unprepare:
+ pm_runtime_disable(phy->dev);
+ clk_unprepare(phy->refclk);
+ return error;
+}
+
+static int dm816x_usb_phy_remove(struct platform_device *pdev)
+{
+ struct dm816x_usb_phy *phy = platform_get_drvdata(pdev);
+
+ usb_remove_phy(&phy->phy);
+ pm_runtime_disable(phy->dev);
+ clk_unprepare(phy->refclk);
+
+ return 0;
+}
+
+static struct platform_driver dm816x_usb_phy_driver = {
+ .probe = dm816x_usb_phy_probe,
+ .remove = dm816x_usb_phy_remove,
+ .driver = {
+ .name = "dm816x-usb-phy",
+ .pm = &dm816x_usb_phy_pm_ops,
+ .of_match_table = of_match_ptr(dm816x_usb_phy_id_table),
+ },
+};
+
+module_platform_driver(dm816x_usb_phy_driver);
+
+MODULE_ALIAS("platform:dm816x_usb");
+MODULE_AUTHOR("Tony Lindgren <tony@atomide.com>");
+MODULE_DESCRIPTION("dm816x usb phy driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/phy/ti/phy-gmii-sel.c b/drivers/phy/ti/phy-gmii-sel.c
new file mode 100644
index 000000000..d0ab69750
--- /dev/null
+++ b/drivers/phy/ti/phy-gmii-sel.c
@@ -0,0 +1,403 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Texas Instruments CPSW Port's PHY Interface Mode selection Driver
+ *
+ * Copyright (C) 2018 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * Based on cpsw-phy-sel.c driver created by Mugunthan V N <mugunthanvnm@ti.com>
+ */
+
+#include <linux/platform_device.h>
+#include <linux/module.h>
+#include <linux/mfd/syscon.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_net.h>
+#include <linux/phy.h>
+#include <linux/phy/phy.h>
+#include <linux/regmap.h>
+
+/* AM33xx SoC specific definitions for the CONTROL port */
+#define AM33XX_GMII_SEL_MODE_MII 0
+#define AM33XX_GMII_SEL_MODE_RMII 1
+#define AM33XX_GMII_SEL_MODE_RGMII 2
+
+enum {
+ PHY_GMII_SEL_PORT_MODE = 0,
+ PHY_GMII_SEL_RGMII_ID_MODE,
+ PHY_GMII_SEL_RMII_IO_CLK_EN,
+ PHY_GMII_SEL_LAST,
+};
+
+struct phy_gmii_sel_phy_priv {
+ struct phy_gmii_sel_priv *priv;
+ u32 id;
+ struct phy *if_phy;
+ int rmii_clock_external;
+ int phy_if_mode;
+ struct regmap_field *fields[PHY_GMII_SEL_LAST];
+};
+
+struct phy_gmii_sel_soc_data {
+ u32 num_ports;
+ u32 features;
+ const struct reg_field (*regfields)[PHY_GMII_SEL_LAST];
+ bool use_of_data;
+};
+
+struct phy_gmii_sel_priv {
+ struct device *dev;
+ const struct phy_gmii_sel_soc_data *soc_data;
+ struct regmap *regmap;
+ struct phy_provider *phy_provider;
+ struct phy_gmii_sel_phy_priv *if_phys;
+ u32 num_ports;
+ u32 reg_offset;
+};
+
+static int phy_gmii_sel_mode(struct phy *phy, enum phy_mode mode, int submode)
+{
+ struct phy_gmii_sel_phy_priv *if_phy = phy_get_drvdata(phy);
+ const struct phy_gmii_sel_soc_data *soc_data = if_phy->priv->soc_data;
+ struct device *dev = if_phy->priv->dev;
+ struct regmap_field *regfield;
+ int ret, rgmii_id = 0;
+ u32 gmii_sel_mode = 0;
+
+ if (mode != PHY_MODE_ETHERNET)
+ return -EINVAL;
+
+ switch (submode) {
+ case PHY_INTERFACE_MODE_RMII:
+ gmii_sel_mode = AM33XX_GMII_SEL_MODE_RMII;
+ break;
+
+ case PHY_INTERFACE_MODE_RGMII:
+ case PHY_INTERFACE_MODE_RGMII_RXID:
+ gmii_sel_mode = AM33XX_GMII_SEL_MODE_RGMII;
+ break;
+
+ case PHY_INTERFACE_MODE_RGMII_ID:
+ case PHY_INTERFACE_MODE_RGMII_TXID:
+ gmii_sel_mode = AM33XX_GMII_SEL_MODE_RGMII;
+ rgmii_id = 1;
+ break;
+
+ case PHY_INTERFACE_MODE_MII:
+ case PHY_INTERFACE_MODE_GMII:
+ gmii_sel_mode = AM33XX_GMII_SEL_MODE_MII;
+ break;
+
+ default:
+ dev_warn(dev, "port%u: unsupported mode: \"%s\"\n",
+ if_phy->id, phy_modes(submode));
+ return -EINVAL;
+ }
+
+ if_phy->phy_if_mode = submode;
+
+ dev_dbg(dev, "%s id:%u mode:%u rgmii_id:%d rmii_clk_ext:%d\n",
+ __func__, if_phy->id, submode, rgmii_id,
+ if_phy->rmii_clock_external);
+
+ regfield = if_phy->fields[PHY_GMII_SEL_PORT_MODE];
+ ret = regmap_field_write(regfield, gmii_sel_mode);
+ if (ret) {
+ dev_err(dev, "port%u: set mode fail %d", if_phy->id, ret);
+ return ret;
+ }
+
+ if (soc_data->features & BIT(PHY_GMII_SEL_RGMII_ID_MODE) &&
+ if_phy->fields[PHY_GMII_SEL_RGMII_ID_MODE]) {
+ regfield = if_phy->fields[PHY_GMII_SEL_RGMII_ID_MODE];
+ ret = regmap_field_write(regfield, rgmii_id);
+ if (ret)
+ return ret;
+ }
+
+ if (soc_data->features & BIT(PHY_GMII_SEL_RMII_IO_CLK_EN) &&
+ if_phy->fields[PHY_GMII_SEL_RMII_IO_CLK_EN]) {
+ regfield = if_phy->fields[PHY_GMII_SEL_RMII_IO_CLK_EN];
+ ret = regmap_field_write(regfield,
+ if_phy->rmii_clock_external);
+ }
+
+ return 0;
+}
+
+static const
+struct reg_field phy_gmii_sel_fields_am33xx[][PHY_GMII_SEL_LAST] = {
+ {
+ [PHY_GMII_SEL_PORT_MODE] = REG_FIELD(0x650, 0, 1),
+ [PHY_GMII_SEL_RGMII_ID_MODE] = REG_FIELD(0x650, 4, 4),
+ [PHY_GMII_SEL_RMII_IO_CLK_EN] = REG_FIELD(0x650, 6, 6),
+ },
+ {
+ [PHY_GMII_SEL_PORT_MODE] = REG_FIELD(0x650, 2, 3),
+ [PHY_GMII_SEL_RGMII_ID_MODE] = REG_FIELD(0x650, 5, 5),
+ [PHY_GMII_SEL_RMII_IO_CLK_EN] = REG_FIELD(0x650, 7, 7),
+ },
+};
+
+static const
+struct phy_gmii_sel_soc_data phy_gmii_sel_soc_am33xx = {
+ .num_ports = 2,
+ .features = BIT(PHY_GMII_SEL_RGMII_ID_MODE) |
+ BIT(PHY_GMII_SEL_RMII_IO_CLK_EN),
+ .regfields = phy_gmii_sel_fields_am33xx,
+};
+
+static const
+struct reg_field phy_gmii_sel_fields_dra7[][PHY_GMII_SEL_LAST] = {
+ {
+ [PHY_GMII_SEL_PORT_MODE] = REG_FIELD(0x554, 0, 1),
+ },
+ {
+ [PHY_GMII_SEL_PORT_MODE] = REG_FIELD(0x554, 4, 5),
+ },
+};
+
+static const
+struct phy_gmii_sel_soc_data phy_gmii_sel_soc_dra7 = {
+ .num_ports = 2,
+ .regfields = phy_gmii_sel_fields_dra7,
+};
+
+static const
+struct phy_gmii_sel_soc_data phy_gmii_sel_soc_dm814 = {
+ .num_ports = 2,
+ .features = BIT(PHY_GMII_SEL_RGMII_ID_MODE),
+ .regfields = phy_gmii_sel_fields_am33xx,
+};
+
+static const
+struct reg_field phy_gmii_sel_fields_am654[][PHY_GMII_SEL_LAST] = {
+ { [PHY_GMII_SEL_PORT_MODE] = REG_FIELD(0x0, 0, 2), },
+ { [PHY_GMII_SEL_PORT_MODE] = REG_FIELD(0x4, 0, 2), },
+ { [PHY_GMII_SEL_PORT_MODE] = REG_FIELD(0x8, 0, 2), },
+ { [PHY_GMII_SEL_PORT_MODE] = REG_FIELD(0xC, 0, 2), },
+ { [PHY_GMII_SEL_PORT_MODE] = REG_FIELD(0x10, 0, 2), },
+ { [PHY_GMII_SEL_PORT_MODE] = REG_FIELD(0x14, 0, 2), },
+ { [PHY_GMII_SEL_PORT_MODE] = REG_FIELD(0x18, 0, 2), },
+ { [PHY_GMII_SEL_PORT_MODE] = REG_FIELD(0x1C, 0, 2), },
+};
+
+static const
+struct phy_gmii_sel_soc_data phy_gmii_sel_soc_am654 = {
+ .use_of_data = true,
+ .regfields = phy_gmii_sel_fields_am654,
+};
+
+static const struct of_device_id phy_gmii_sel_id_table[] = {
+ {
+ .compatible = "ti,am3352-phy-gmii-sel",
+ .data = &phy_gmii_sel_soc_am33xx,
+ },
+ {
+ .compatible = "ti,dra7xx-phy-gmii-sel",
+ .data = &phy_gmii_sel_soc_dra7,
+ },
+ {
+ .compatible = "ti,am43xx-phy-gmii-sel",
+ .data = &phy_gmii_sel_soc_am33xx,
+ },
+ {
+ .compatible = "ti,dm814-phy-gmii-sel",
+ .data = &phy_gmii_sel_soc_dm814,
+ },
+ {
+ .compatible = "ti,am654-phy-gmii-sel",
+ .data = &phy_gmii_sel_soc_am654,
+ },
+ {}
+};
+MODULE_DEVICE_TABLE(of, phy_gmii_sel_id_table);
+
+static const struct phy_ops phy_gmii_sel_ops = {
+ .set_mode = phy_gmii_sel_mode,
+ .owner = THIS_MODULE,
+};
+
+static struct phy *phy_gmii_sel_of_xlate(struct device *dev,
+ struct of_phandle_args *args)
+{
+ struct phy_gmii_sel_priv *priv = dev_get_drvdata(dev);
+ int phy_id = args->args[0];
+
+ if (args->args_count < 1)
+ return ERR_PTR(-EINVAL);
+ if (!priv || !priv->if_phys)
+ return ERR_PTR(-ENODEV);
+ if (priv->soc_data->features & BIT(PHY_GMII_SEL_RMII_IO_CLK_EN) &&
+ args->args_count < 2)
+ return ERR_PTR(-EINVAL);
+ if (phy_id > priv->num_ports)
+ return ERR_PTR(-EINVAL);
+ if (phy_id != priv->if_phys[phy_id - 1].id)
+ return ERR_PTR(-EINVAL);
+
+ phy_id--;
+ if (priv->soc_data->features & BIT(PHY_GMII_SEL_RMII_IO_CLK_EN))
+ priv->if_phys[phy_id].rmii_clock_external = args->args[1];
+ dev_dbg(dev, "%s id:%u ext:%d\n", __func__,
+ priv->if_phys[phy_id].id, args->args[1]);
+
+ return priv->if_phys[phy_id].if_phy;
+}
+
+static int phy_gmii_init_phy(struct phy_gmii_sel_priv *priv, int port,
+ struct phy_gmii_sel_phy_priv *if_phy)
+{
+ const struct phy_gmii_sel_soc_data *soc_data = priv->soc_data;
+ struct device *dev = priv->dev;
+ const struct reg_field *fields;
+ struct regmap_field *regfield;
+ struct reg_field field;
+ int ret;
+
+ if_phy->id = port;
+ if_phy->priv = priv;
+
+ fields = soc_data->regfields[port - 1];
+ field = *fields++;
+ field.reg += priv->reg_offset;
+ dev_dbg(dev, "%s field %x %d %d\n", __func__,
+ field.reg, field.msb, field.lsb);
+
+ regfield = devm_regmap_field_alloc(dev, priv->regmap, field);
+ if (IS_ERR(regfield))
+ return PTR_ERR(regfield);
+ if_phy->fields[PHY_GMII_SEL_PORT_MODE] = regfield;
+
+ field = *fields++;
+ field.reg += priv->reg_offset;
+ if (soc_data->features & BIT(PHY_GMII_SEL_RGMII_ID_MODE)) {
+ regfield = devm_regmap_field_alloc(dev,
+ priv->regmap,
+ field);
+ if (IS_ERR(regfield))
+ return PTR_ERR(regfield);
+ if_phy->fields[PHY_GMII_SEL_RGMII_ID_MODE] = regfield;
+ dev_dbg(dev, "%s field %x %d %d\n", __func__,
+ field.reg, field.msb, field.lsb);
+ }
+
+ field = *fields;
+ field.reg += priv->reg_offset;
+ if (soc_data->features & BIT(PHY_GMII_SEL_RMII_IO_CLK_EN)) {
+ regfield = devm_regmap_field_alloc(dev,
+ priv->regmap,
+ field);
+ if (IS_ERR(regfield))
+ return PTR_ERR(regfield);
+ if_phy->fields[PHY_GMII_SEL_RMII_IO_CLK_EN] = regfield;
+ dev_dbg(dev, "%s field %x %d %d\n", __func__,
+ field.reg, field.msb, field.lsb);
+ }
+
+ if_phy->if_phy = devm_phy_create(dev,
+ priv->dev->of_node,
+ &phy_gmii_sel_ops);
+ if (IS_ERR(if_phy->if_phy)) {
+ ret = PTR_ERR(if_phy->if_phy);
+ dev_err(dev, "Failed to create phy%d %d\n", port, ret);
+ return ret;
+ }
+ phy_set_drvdata(if_phy->if_phy, if_phy);
+
+ return 0;
+}
+
+static int phy_gmii_sel_init_ports(struct phy_gmii_sel_priv *priv)
+{
+ const struct phy_gmii_sel_soc_data *soc_data = priv->soc_data;
+ struct phy_gmii_sel_phy_priv *if_phys;
+ struct device *dev = priv->dev;
+ int i, ret;
+
+ if (soc_data->use_of_data) {
+ const __be32 *offset;
+ u64 size;
+
+ offset = of_get_address(dev->of_node, 0, &size, NULL);
+ if (!offset)
+ return -EINVAL;
+ priv->num_ports = size / sizeof(u32);
+ if (!priv->num_ports)
+ return -EINVAL;
+ priv->reg_offset = __be32_to_cpu(*offset);
+ }
+
+ if_phys = devm_kcalloc(dev, priv->num_ports,
+ sizeof(*if_phys), GFP_KERNEL);
+ if (!if_phys)
+ return -ENOMEM;
+ dev_dbg(dev, "%s %d\n", __func__, priv->num_ports);
+
+ for (i = 0; i < priv->num_ports; i++) {
+ ret = phy_gmii_init_phy(priv, i + 1, &if_phys[i]);
+ if (ret)
+ return ret;
+ }
+
+ priv->if_phys = if_phys;
+ return 0;
+}
+
+static int phy_gmii_sel_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct device_node *node = dev->of_node;
+ const struct of_device_id *of_id;
+ struct phy_gmii_sel_priv *priv;
+ int ret;
+
+ of_id = of_match_node(phy_gmii_sel_id_table, pdev->dev.of_node);
+ if (!of_id)
+ return -EINVAL;
+
+ priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ priv->dev = &pdev->dev;
+ priv->soc_data = of_id->data;
+ priv->num_ports = priv->soc_data->num_ports;
+
+ priv->regmap = syscon_node_to_regmap(node->parent);
+ if (IS_ERR(priv->regmap)) {
+ ret = PTR_ERR(priv->regmap);
+ dev_err(dev, "Failed to get syscon %d\n", ret);
+ return ret;
+ }
+
+ ret = phy_gmii_sel_init_ports(priv);
+ if (ret)
+ return ret;
+
+ dev_set_drvdata(&pdev->dev, priv);
+
+ priv->phy_provider =
+ devm_of_phy_provider_register(dev,
+ phy_gmii_sel_of_xlate);
+ if (IS_ERR(priv->phy_provider)) {
+ ret = PTR_ERR(priv->phy_provider);
+ dev_err(dev, "Failed to create phy provider %d\n", ret);
+ return ret;
+ }
+
+ return 0;
+}
+
+static struct platform_driver phy_gmii_sel_driver = {
+ .probe = phy_gmii_sel_probe,
+ .driver = {
+ .name = "phy-gmii-sel",
+ .of_match_table = phy_gmii_sel_id_table,
+ },
+};
+module_platform_driver(phy_gmii_sel_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Grygorii Strashko <grygorii.strashko@ti.com>");
+MODULE_DESCRIPTION("TI CPSW Port's PHY Interface Mode selection Driver");
diff --git a/drivers/phy/ti/phy-j721e-wiz.c b/drivers/phy/ti/phy-j721e-wiz.c
new file mode 100644
index 000000000..5536b8f4b
--- /dev/null
+++ b/drivers/phy/ti/phy-j721e-wiz.c
@@ -0,0 +1,1018 @@
+// SPDX-License-Identifier: GPL-2.0
+/**
+ * Wrapper driver for SERDES used in J721E
+ *
+ * Copyright (C) 2019 Texas Instruments Incorporated - http://www.ti.com/
+ * Author: Kishon Vijay Abraham I <kishon@ti.com>
+ */
+
+#include <dt-bindings/phy/phy.h>
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/mux/consumer.h>
+#include <linux/of_address.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/regmap.h>
+#include <linux/reset-controller.h>
+
+#define WIZ_SERDES_CTRL 0x404
+#define WIZ_SERDES_TOP_CTRL 0x408
+#define WIZ_SERDES_RST 0x40c
+#define WIZ_SERDES_TYPEC 0x410
+#define WIZ_LANECTL(n) (0x480 + (0x40 * (n)))
+
+#define WIZ_MAX_LANES 4
+#define WIZ_MUX_NUM_CLOCKS 3
+#define WIZ_DIV_NUM_CLOCKS_16G 2
+#define WIZ_DIV_NUM_CLOCKS_10G 1
+
+#define WIZ_SERDES_TYPEC_LN10_SWAP BIT(30)
+
+enum wiz_lane_standard_mode {
+ LANE_MODE_GEN1,
+ LANE_MODE_GEN2,
+ LANE_MODE_GEN3,
+ LANE_MODE_GEN4,
+};
+
+enum wiz_refclk_mux_sel {
+ PLL0_REFCLK,
+ PLL1_REFCLK,
+ REFCLK_DIG,
+};
+
+enum wiz_refclk_div_sel {
+ CMN_REFCLK_DIG_DIV,
+ CMN_REFCLK1_DIG_DIV,
+};
+
+static const struct reg_field por_en = REG_FIELD(WIZ_SERDES_CTRL, 31, 31);
+static const struct reg_field phy_reset_n = REG_FIELD(WIZ_SERDES_RST, 31, 31);
+static const struct reg_field pll1_refclk_mux_sel =
+ REG_FIELD(WIZ_SERDES_RST, 29, 29);
+static const struct reg_field pll0_refclk_mux_sel =
+ REG_FIELD(WIZ_SERDES_RST, 28, 28);
+static const struct reg_field refclk_dig_sel_16g =
+ REG_FIELD(WIZ_SERDES_RST, 24, 25);
+static const struct reg_field refclk_dig_sel_10g =
+ REG_FIELD(WIZ_SERDES_RST, 24, 24);
+static const struct reg_field pma_cmn_refclk_int_mode =
+ REG_FIELD(WIZ_SERDES_TOP_CTRL, 28, 29);
+static const struct reg_field pma_cmn_refclk_mode =
+ REG_FIELD(WIZ_SERDES_TOP_CTRL, 30, 31);
+static const struct reg_field pma_cmn_refclk_dig_div =
+ REG_FIELD(WIZ_SERDES_TOP_CTRL, 26, 27);
+static const struct reg_field pma_cmn_refclk1_dig_div =
+ REG_FIELD(WIZ_SERDES_TOP_CTRL, 24, 25);
+
+static const struct reg_field p_enable[WIZ_MAX_LANES] = {
+ REG_FIELD(WIZ_LANECTL(0), 30, 31),
+ REG_FIELD(WIZ_LANECTL(1), 30, 31),
+ REG_FIELD(WIZ_LANECTL(2), 30, 31),
+ REG_FIELD(WIZ_LANECTL(3), 30, 31),
+};
+
+enum p_enable { P_ENABLE = 2, P_ENABLE_FORCE = 1, P_ENABLE_DISABLE = 0 };
+
+static const struct reg_field p_align[WIZ_MAX_LANES] = {
+ REG_FIELD(WIZ_LANECTL(0), 29, 29),
+ REG_FIELD(WIZ_LANECTL(1), 29, 29),
+ REG_FIELD(WIZ_LANECTL(2), 29, 29),
+ REG_FIELD(WIZ_LANECTL(3), 29, 29),
+};
+
+static const struct reg_field p_raw_auto_start[WIZ_MAX_LANES] = {
+ REG_FIELD(WIZ_LANECTL(0), 28, 28),
+ REG_FIELD(WIZ_LANECTL(1), 28, 28),
+ REG_FIELD(WIZ_LANECTL(2), 28, 28),
+ REG_FIELD(WIZ_LANECTL(3), 28, 28),
+};
+
+static const struct reg_field p_standard_mode[WIZ_MAX_LANES] = {
+ REG_FIELD(WIZ_LANECTL(0), 24, 25),
+ REG_FIELD(WIZ_LANECTL(1), 24, 25),
+ REG_FIELD(WIZ_LANECTL(2), 24, 25),
+ REG_FIELD(WIZ_LANECTL(3), 24, 25),
+};
+
+static const struct reg_field typec_ln10_swap =
+ REG_FIELD(WIZ_SERDES_TYPEC, 30, 30);
+
+struct wiz_clk_mux {
+ struct clk_hw hw;
+ struct regmap_field *field;
+ u32 *table;
+ struct clk_init_data clk_data;
+};
+
+#define to_wiz_clk_mux(_hw) container_of(_hw, struct wiz_clk_mux, hw)
+
+struct wiz_clk_divider {
+ struct clk_hw hw;
+ struct regmap_field *field;
+ const struct clk_div_table *table;
+ struct clk_init_data clk_data;
+};
+
+#define to_wiz_clk_div(_hw) container_of(_hw, struct wiz_clk_divider, hw)
+
+struct wiz_clk_mux_sel {
+ struct regmap_field *field;
+ u32 table[4];
+ const char *node_name;
+};
+
+struct wiz_clk_div_sel {
+ struct regmap_field *field;
+ const struct clk_div_table *table;
+ const char *node_name;
+};
+
+static struct wiz_clk_mux_sel clk_mux_sel_16g[] = {
+ {
+ /*
+ * Mux value to be configured for each of the input clocks
+ * in the order populated in device tree
+ */
+ .table = { 1, 0 },
+ .node_name = "pll0-refclk",
+ },
+ {
+ .table = { 1, 0 },
+ .node_name = "pll1-refclk",
+ },
+ {
+ .table = { 1, 3, 0, 2 },
+ .node_name = "refclk-dig",
+ },
+};
+
+static struct wiz_clk_mux_sel clk_mux_sel_10g[] = {
+ {
+ /*
+ * Mux value to be configured for each of the input clocks
+ * in the order populated in device tree
+ */
+ .table = { 1, 0 },
+ .node_name = "pll0-refclk",
+ },
+ {
+ .table = { 1, 0 },
+ .node_name = "pll1-refclk",
+ },
+ {
+ .table = { 1, 0 },
+ .node_name = "refclk-dig",
+ },
+};
+
+static const struct clk_div_table clk_div_table[] = {
+ { .val = 0, .div = 1, },
+ { .val = 1, .div = 2, },
+ { .val = 2, .div = 4, },
+ { .val = 3, .div = 8, },
+ { /* sentinel */ },
+};
+
+static struct wiz_clk_div_sel clk_div_sel[] = {
+ {
+ .table = clk_div_table,
+ .node_name = "cmn-refclk-dig-div",
+ },
+ {
+ .table = clk_div_table,
+ .node_name = "cmn-refclk1-dig-div",
+ },
+};
+
+enum wiz_type {
+ J721E_WIZ_16G,
+ J721E_WIZ_10G,
+};
+
+#define WIZ_TYPEC_DIR_DEBOUNCE_MIN 100 /* ms */
+#define WIZ_TYPEC_DIR_DEBOUNCE_MAX 1000
+
+struct wiz {
+ struct regmap *regmap;
+ enum wiz_type type;
+ struct wiz_clk_mux_sel *clk_mux_sel;
+ struct wiz_clk_div_sel *clk_div_sel;
+ unsigned int clk_div_sel_num;
+ struct regmap_field *por_en;
+ struct regmap_field *phy_reset_n;
+ struct regmap_field *p_enable[WIZ_MAX_LANES];
+ struct regmap_field *p_align[WIZ_MAX_LANES];
+ struct regmap_field *p_raw_auto_start[WIZ_MAX_LANES];
+ struct regmap_field *p_standard_mode[WIZ_MAX_LANES];
+ struct regmap_field *pma_cmn_refclk_int_mode;
+ struct regmap_field *pma_cmn_refclk_mode;
+ struct regmap_field *pma_cmn_refclk_dig_div;
+ struct regmap_field *pma_cmn_refclk1_dig_div;
+ struct regmap_field *typec_ln10_swap;
+
+ struct device *dev;
+ u32 num_lanes;
+ struct platform_device *serdes_pdev;
+ struct reset_controller_dev wiz_phy_reset_dev;
+ struct gpio_desc *gpio_typec_dir;
+ int typec_dir_delay;
+ u32 lane_phy_type[WIZ_MAX_LANES];
+};
+
+static int wiz_reset(struct wiz *wiz)
+{
+ int ret;
+
+ ret = regmap_field_write(wiz->por_en, 0x1);
+ if (ret)
+ return ret;
+
+ mdelay(1);
+
+ ret = regmap_field_write(wiz->por_en, 0x0);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+
+static int wiz_mode_select(struct wiz *wiz)
+{
+ u32 num_lanes = wiz->num_lanes;
+ enum wiz_lane_standard_mode mode;
+ int ret;
+ int i;
+
+ for (i = 0; i < num_lanes; i++) {
+ if (wiz->lane_phy_type[i] == PHY_TYPE_DP)
+ mode = LANE_MODE_GEN1;
+ else
+ mode = LANE_MODE_GEN4;
+
+ ret = regmap_field_write(wiz->p_standard_mode[i], mode);
+ if (ret)
+ return ret;
+ }
+
+ return 0;
+}
+
+static int wiz_init_raw_interface(struct wiz *wiz, bool enable)
+{
+ u32 num_lanes = wiz->num_lanes;
+ int i;
+ int ret;
+
+ for (i = 0; i < num_lanes; i++) {
+ ret = regmap_field_write(wiz->p_align[i], enable);
+ if (ret)
+ return ret;
+
+ ret = regmap_field_write(wiz->p_raw_auto_start[i], enable);
+ if (ret)
+ return ret;
+ }
+
+ return 0;
+}
+
+static int wiz_init(struct wiz *wiz)
+{
+ struct device *dev = wiz->dev;
+ int ret;
+
+ ret = wiz_reset(wiz);
+ if (ret) {
+ dev_err(dev, "WIZ reset failed\n");
+ return ret;
+ }
+
+ ret = wiz_mode_select(wiz);
+ if (ret) {
+ dev_err(dev, "WIZ mode select failed\n");
+ return ret;
+ }
+
+ ret = wiz_init_raw_interface(wiz, true);
+ if (ret) {
+ dev_err(dev, "WIZ interface initialization failed\n");
+ return ret;
+ }
+
+ return 0;
+}
+
+static int wiz_regfield_init(struct wiz *wiz)
+{
+ struct wiz_clk_mux_sel *clk_mux_sel;
+ struct wiz_clk_div_sel *clk_div_sel;
+ struct regmap *regmap = wiz->regmap;
+ int num_lanes = wiz->num_lanes;
+ struct device *dev = wiz->dev;
+ int i;
+
+ wiz->por_en = devm_regmap_field_alloc(dev, regmap, por_en);
+ if (IS_ERR(wiz->por_en)) {
+ dev_err(dev, "POR_EN reg field init failed\n");
+ return PTR_ERR(wiz->por_en);
+ }
+
+ wiz->phy_reset_n = devm_regmap_field_alloc(dev, regmap,
+ phy_reset_n);
+ if (IS_ERR(wiz->phy_reset_n)) {
+ dev_err(dev, "PHY_RESET_N reg field init failed\n");
+ return PTR_ERR(wiz->phy_reset_n);
+ }
+
+ wiz->pma_cmn_refclk_int_mode =
+ devm_regmap_field_alloc(dev, regmap, pma_cmn_refclk_int_mode);
+ if (IS_ERR(wiz->pma_cmn_refclk_int_mode)) {
+ dev_err(dev, "PMA_CMN_REFCLK_INT_MODE reg field init failed\n");
+ return PTR_ERR(wiz->pma_cmn_refclk_int_mode);
+ }
+
+ wiz->pma_cmn_refclk_mode =
+ devm_regmap_field_alloc(dev, regmap, pma_cmn_refclk_mode);
+ if (IS_ERR(wiz->pma_cmn_refclk_mode)) {
+ dev_err(dev, "PMA_CMN_REFCLK_MODE reg field init failed\n");
+ return PTR_ERR(wiz->pma_cmn_refclk_mode);
+ }
+
+ clk_div_sel = &wiz->clk_div_sel[CMN_REFCLK_DIG_DIV];
+ clk_div_sel->field = devm_regmap_field_alloc(dev, regmap,
+ pma_cmn_refclk_dig_div);
+ if (IS_ERR(clk_div_sel->field)) {
+ dev_err(dev, "PMA_CMN_REFCLK_DIG_DIV reg field init failed\n");
+ return PTR_ERR(clk_div_sel->field);
+ }
+
+ if (wiz->type == J721E_WIZ_16G) {
+ clk_div_sel = &wiz->clk_div_sel[CMN_REFCLK1_DIG_DIV];
+ clk_div_sel->field =
+ devm_regmap_field_alloc(dev, regmap,
+ pma_cmn_refclk1_dig_div);
+ if (IS_ERR(clk_div_sel->field)) {
+ dev_err(dev, "PMA_CMN_REFCLK1_DIG_DIV reg field init failed\n");
+ return PTR_ERR(clk_div_sel->field);
+ }
+ }
+
+ clk_mux_sel = &wiz->clk_mux_sel[PLL0_REFCLK];
+ clk_mux_sel->field = devm_regmap_field_alloc(dev, regmap,
+ pll0_refclk_mux_sel);
+ if (IS_ERR(clk_mux_sel->field)) {
+ dev_err(dev, "PLL0_REFCLK_SEL reg field init failed\n");
+ return PTR_ERR(clk_mux_sel->field);
+ }
+
+ clk_mux_sel = &wiz->clk_mux_sel[PLL1_REFCLK];
+ clk_mux_sel->field = devm_regmap_field_alloc(dev, regmap,
+ pll1_refclk_mux_sel);
+ if (IS_ERR(clk_mux_sel->field)) {
+ dev_err(dev, "PLL1_REFCLK_SEL reg field init failed\n");
+ return PTR_ERR(clk_mux_sel->field);
+ }
+
+ clk_mux_sel = &wiz->clk_mux_sel[REFCLK_DIG];
+ if (wiz->type == J721E_WIZ_10G)
+ clk_mux_sel->field =
+ devm_regmap_field_alloc(dev, regmap,
+ refclk_dig_sel_10g);
+ else
+ clk_mux_sel->field =
+ devm_regmap_field_alloc(dev, regmap,
+ refclk_dig_sel_16g);
+
+ if (IS_ERR(clk_mux_sel->field)) {
+ dev_err(dev, "REFCLK_DIG_SEL reg field init failed\n");
+ return PTR_ERR(clk_mux_sel->field);
+ }
+
+ for (i = 0; i < num_lanes; i++) {
+ wiz->p_enable[i] = devm_regmap_field_alloc(dev, regmap,
+ p_enable[i]);
+ if (IS_ERR(wiz->p_enable[i])) {
+ dev_err(dev, "P%d_ENABLE reg field init failed\n", i);
+ return PTR_ERR(wiz->p_enable[i]);
+ }
+
+ wiz->p_align[i] = devm_regmap_field_alloc(dev, regmap,
+ p_align[i]);
+ if (IS_ERR(wiz->p_align[i])) {
+ dev_err(dev, "P%d_ALIGN reg field init failed\n", i);
+ return PTR_ERR(wiz->p_align[i]);
+ }
+
+ wiz->p_raw_auto_start[i] =
+ devm_regmap_field_alloc(dev, regmap, p_raw_auto_start[i]);
+ if (IS_ERR(wiz->p_raw_auto_start[i])) {
+ dev_err(dev, "P%d_RAW_AUTO_START reg field init fail\n",
+ i);
+ return PTR_ERR(wiz->p_raw_auto_start[i]);
+ }
+
+ wiz->p_standard_mode[i] =
+ devm_regmap_field_alloc(dev, regmap, p_standard_mode[i]);
+ if (IS_ERR(wiz->p_standard_mode[i])) {
+ dev_err(dev, "P%d_STANDARD_MODE reg field init fail\n",
+ i);
+ return PTR_ERR(wiz->p_standard_mode[i]);
+ }
+ }
+
+ wiz->typec_ln10_swap = devm_regmap_field_alloc(dev, regmap,
+ typec_ln10_swap);
+ if (IS_ERR(wiz->typec_ln10_swap)) {
+ dev_err(dev, "LN10_SWAP reg field init failed\n");
+ return PTR_ERR(wiz->typec_ln10_swap);
+ }
+
+ return 0;
+}
+
+static u8 wiz_clk_mux_get_parent(struct clk_hw *hw)
+{
+ struct wiz_clk_mux *mux = to_wiz_clk_mux(hw);
+ struct regmap_field *field = mux->field;
+ unsigned int val;
+
+ regmap_field_read(field, &val);
+ return clk_mux_val_to_index(hw, mux->table, 0, val);
+}
+
+static int wiz_clk_mux_set_parent(struct clk_hw *hw, u8 index)
+{
+ struct wiz_clk_mux *mux = to_wiz_clk_mux(hw);
+ struct regmap_field *field = mux->field;
+ int val;
+
+ val = mux->table[index];
+ return regmap_field_write(field, val);
+}
+
+static const struct clk_ops wiz_clk_mux_ops = {
+ .set_parent = wiz_clk_mux_set_parent,
+ .get_parent = wiz_clk_mux_get_parent,
+};
+
+static int wiz_mux_clk_register(struct wiz *wiz, struct device_node *node,
+ struct regmap_field *field, u32 *table)
+{
+ struct device *dev = wiz->dev;
+ struct clk_init_data *init;
+ const char **parent_names;
+ unsigned int num_parents;
+ struct wiz_clk_mux *mux;
+ char clk_name[100];
+ struct clk *clk;
+ int ret;
+
+ mux = devm_kzalloc(dev, sizeof(*mux), GFP_KERNEL);
+ if (!mux)
+ return -ENOMEM;
+
+ num_parents = of_clk_get_parent_count(node);
+ if (num_parents < 2) {
+ dev_err(dev, "SERDES clock must have parents\n");
+ return -EINVAL;
+ }
+
+ parent_names = devm_kzalloc(dev, (sizeof(char *) * num_parents),
+ GFP_KERNEL);
+ if (!parent_names)
+ return -ENOMEM;
+
+ of_clk_parent_fill(node, parent_names, num_parents);
+
+ snprintf(clk_name, sizeof(clk_name), "%s_%s", dev_name(dev),
+ node->name);
+
+ init = &mux->clk_data;
+
+ init->ops = &wiz_clk_mux_ops;
+ init->flags = CLK_SET_RATE_NO_REPARENT;
+ init->parent_names = parent_names;
+ init->num_parents = num_parents;
+ init->name = clk_name;
+
+ mux->field = field;
+ mux->table = table;
+ mux->hw.init = init;
+
+ clk = devm_clk_register(dev, &mux->hw);
+ if (IS_ERR(clk))
+ return PTR_ERR(clk);
+
+ ret = of_clk_add_provider(node, of_clk_src_simple_get, clk);
+ if (ret)
+ dev_err(dev, "Failed to add clock provider: %s\n", clk_name);
+
+ return ret;
+}
+
+static unsigned long wiz_clk_div_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct wiz_clk_divider *div = to_wiz_clk_div(hw);
+ struct regmap_field *field = div->field;
+ int val;
+
+ regmap_field_read(field, &val);
+
+ return divider_recalc_rate(hw, parent_rate, val, div->table, 0x0, 2);
+}
+
+static long wiz_clk_div_round_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long *prate)
+{
+ struct wiz_clk_divider *div = to_wiz_clk_div(hw);
+
+ return divider_round_rate(hw, rate, prate, div->table, 2, 0x0);
+}
+
+static int wiz_clk_div_set_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate)
+{
+ struct wiz_clk_divider *div = to_wiz_clk_div(hw);
+ struct regmap_field *field = div->field;
+ int val;
+
+ val = divider_get_val(rate, parent_rate, div->table, 2, 0x0);
+ if (val < 0)
+ return val;
+
+ return regmap_field_write(field, val);
+}
+
+static const struct clk_ops wiz_clk_div_ops = {
+ .recalc_rate = wiz_clk_div_recalc_rate,
+ .round_rate = wiz_clk_div_round_rate,
+ .set_rate = wiz_clk_div_set_rate,
+};
+
+static int wiz_div_clk_register(struct wiz *wiz, struct device_node *node,
+ struct regmap_field *field,
+ const struct clk_div_table *table)
+{
+ struct device *dev = wiz->dev;
+ struct wiz_clk_divider *div;
+ struct clk_init_data *init;
+ const char **parent_names;
+ char clk_name[100];
+ struct clk *clk;
+ int ret;
+
+ div = devm_kzalloc(dev, sizeof(*div), GFP_KERNEL);
+ if (!div)
+ return -ENOMEM;
+
+ snprintf(clk_name, sizeof(clk_name), "%s_%s", dev_name(dev),
+ node->name);
+
+ parent_names = devm_kzalloc(dev, sizeof(char *), GFP_KERNEL);
+ if (!parent_names)
+ return -ENOMEM;
+
+ of_clk_parent_fill(node, parent_names, 1);
+
+ init = &div->clk_data;
+
+ init->ops = &wiz_clk_div_ops;
+ init->flags = 0;
+ init->parent_names = parent_names;
+ init->num_parents = 1;
+ init->name = clk_name;
+
+ div->field = field;
+ div->table = table;
+ div->hw.init = init;
+
+ clk = devm_clk_register(dev, &div->hw);
+ if (IS_ERR(clk))
+ return PTR_ERR(clk);
+
+ ret = of_clk_add_provider(node, of_clk_src_simple_get, clk);
+ if (ret)
+ dev_err(dev, "Failed to add clock provider: %s\n", clk_name);
+
+ return ret;
+}
+
+static void wiz_clock_cleanup(struct wiz *wiz, struct device_node *node)
+{
+ struct wiz_clk_mux_sel *clk_mux_sel = wiz->clk_mux_sel;
+ struct device_node *clk_node;
+ int i;
+
+ for (i = 0; i < WIZ_MUX_NUM_CLOCKS; i++) {
+ clk_node = of_get_child_by_name(node, clk_mux_sel[i].node_name);
+ of_clk_del_provider(clk_node);
+ of_node_put(clk_node);
+ }
+
+ for (i = 0; i < wiz->clk_div_sel_num; i++) {
+ clk_node = of_get_child_by_name(node, clk_div_sel[i].node_name);
+ of_clk_del_provider(clk_node);
+ of_node_put(clk_node);
+ }
+}
+
+static int wiz_clock_init(struct wiz *wiz, struct device_node *node)
+{
+ struct wiz_clk_mux_sel *clk_mux_sel = wiz->clk_mux_sel;
+ struct device *dev = wiz->dev;
+ struct device_node *clk_node;
+ const char *node_name;
+ unsigned long rate;
+ struct clk *clk;
+ int ret;
+ int i;
+
+ clk = devm_clk_get(dev, "core_ref_clk");
+ if (IS_ERR(clk)) {
+ dev_err(dev, "core_ref_clk clock not found\n");
+ ret = PTR_ERR(clk);
+ return ret;
+ }
+
+ rate = clk_get_rate(clk);
+ if (rate >= 100000000)
+ regmap_field_write(wiz->pma_cmn_refclk_int_mode, 0x1);
+ else
+ regmap_field_write(wiz->pma_cmn_refclk_int_mode, 0x3);
+
+ clk = devm_clk_get(dev, "ext_ref_clk");
+ if (IS_ERR(clk)) {
+ dev_err(dev, "ext_ref_clk clock not found\n");
+ ret = PTR_ERR(clk);
+ return ret;
+ }
+
+ rate = clk_get_rate(clk);
+ if (rate >= 100000000)
+ regmap_field_write(wiz->pma_cmn_refclk_mode, 0x0);
+ else
+ regmap_field_write(wiz->pma_cmn_refclk_mode, 0x2);
+
+ for (i = 0; i < WIZ_MUX_NUM_CLOCKS; i++) {
+ node_name = clk_mux_sel[i].node_name;
+ clk_node = of_get_child_by_name(node, node_name);
+ if (!clk_node) {
+ dev_err(dev, "Unable to get %s node\n", node_name);
+ ret = -EINVAL;
+ goto err;
+ }
+
+ ret = wiz_mux_clk_register(wiz, clk_node, clk_mux_sel[i].field,
+ clk_mux_sel[i].table);
+ if (ret) {
+ dev_err(dev, "Failed to register %s clock\n",
+ node_name);
+ of_node_put(clk_node);
+ goto err;
+ }
+
+ of_node_put(clk_node);
+ }
+
+ for (i = 0; i < wiz->clk_div_sel_num; i++) {
+ node_name = clk_div_sel[i].node_name;
+ clk_node = of_get_child_by_name(node, node_name);
+ if (!clk_node) {
+ dev_err(dev, "Unable to get %s node\n", node_name);
+ ret = -EINVAL;
+ goto err;
+ }
+
+ ret = wiz_div_clk_register(wiz, clk_node, clk_div_sel[i].field,
+ clk_div_sel[i].table);
+ if (ret) {
+ dev_err(dev, "Failed to register %s clock\n",
+ node_name);
+ of_node_put(clk_node);
+ goto err;
+ }
+
+ of_node_put(clk_node);
+ }
+
+ return 0;
+err:
+ wiz_clock_cleanup(wiz, node);
+
+ return ret;
+}
+
+static int wiz_phy_reset_assert(struct reset_controller_dev *rcdev,
+ unsigned long id)
+{
+ struct device *dev = rcdev->dev;
+ struct wiz *wiz = dev_get_drvdata(dev);
+ int ret = 0;
+
+ if (id == 0) {
+ ret = regmap_field_write(wiz->phy_reset_n, false);
+ return ret;
+ }
+
+ ret = regmap_field_write(wiz->p_enable[id - 1], P_ENABLE_DISABLE);
+ return ret;
+}
+
+static int wiz_phy_reset_deassert(struct reset_controller_dev *rcdev,
+ unsigned long id)
+{
+ struct device *dev = rcdev->dev;
+ struct wiz *wiz = dev_get_drvdata(dev);
+ int ret;
+
+ /* if typec-dir gpio was specified, set LN10 SWAP bit based on that */
+ if (id == 0 && wiz->gpio_typec_dir) {
+ if (wiz->typec_dir_delay)
+ msleep_interruptible(wiz->typec_dir_delay);
+
+ if (gpiod_get_value_cansleep(wiz->gpio_typec_dir))
+ regmap_field_write(wiz->typec_ln10_swap, 1);
+ else
+ regmap_field_write(wiz->typec_ln10_swap, 0);
+ }
+
+ if (id == 0) {
+ ret = regmap_field_write(wiz->phy_reset_n, true);
+ return ret;
+ }
+
+ if (wiz->lane_phy_type[id - 1] == PHY_TYPE_DP)
+ ret = regmap_field_write(wiz->p_enable[id - 1], P_ENABLE);
+ else
+ ret = regmap_field_write(wiz->p_enable[id - 1], P_ENABLE_FORCE);
+
+ return ret;
+}
+
+static const struct reset_control_ops wiz_phy_reset_ops = {
+ .assert = wiz_phy_reset_assert,
+ .deassert = wiz_phy_reset_deassert,
+};
+
+static const struct regmap_config wiz_regmap_config = {
+ .reg_bits = 32,
+ .val_bits = 32,
+ .reg_stride = 4,
+ .fast_io = true,
+};
+
+static const struct of_device_id wiz_id_table[] = {
+ {
+ .compatible = "ti,j721e-wiz-16g", .data = (void *)J721E_WIZ_16G
+ },
+ {
+ .compatible = "ti,j721e-wiz-10g", .data = (void *)J721E_WIZ_10G
+ },
+ {}
+};
+MODULE_DEVICE_TABLE(of, wiz_id_table);
+
+static int wiz_get_lane_phy_types(struct device *dev, struct wiz *wiz)
+{
+ struct device_node *serdes, *subnode;
+
+ serdes = of_get_child_by_name(dev->of_node, "serdes");
+ if (!serdes) {
+ dev_err(dev, "%s: Getting \"serdes\"-node failed\n", __func__);
+ return -EINVAL;
+ }
+
+ for_each_child_of_node(serdes, subnode) {
+ u32 reg, num_lanes = 1, phy_type = PHY_NONE;
+ int ret, i;
+
+ ret = of_property_read_u32(subnode, "reg", &reg);
+ if (ret) {
+ dev_err(dev,
+ "%s: Reading \"reg\" from \"%s\" failed: %d\n",
+ __func__, subnode->name, ret);
+ return ret;
+ }
+ of_property_read_u32(subnode, "cdns,num-lanes", &num_lanes);
+ of_property_read_u32(subnode, "cdns,phy-type", &phy_type);
+
+ dev_dbg(dev, "%s: Lanes %u-%u have phy-type %u\n", __func__,
+ reg, reg + num_lanes - 1, phy_type);
+
+ for (i = reg; i < reg + num_lanes; i++)
+ wiz->lane_phy_type[i] = phy_type;
+ }
+
+ return 0;
+}
+
+static int wiz_probe(struct platform_device *pdev)
+{
+ struct reset_controller_dev *phy_reset_dev;
+ struct device *dev = &pdev->dev;
+ struct device_node *node = dev->of_node;
+ struct platform_device *serdes_pdev;
+ struct device_node *child_node;
+ struct regmap *regmap;
+ struct resource res;
+ void __iomem *base;
+ struct wiz *wiz;
+ u32 num_lanes;
+ int ret;
+
+ wiz = devm_kzalloc(dev, sizeof(*wiz), GFP_KERNEL);
+ if (!wiz)
+ return -ENOMEM;
+
+ wiz->type = (enum wiz_type)of_device_get_match_data(dev);
+
+ child_node = of_get_child_by_name(node, "serdes");
+ if (!child_node) {
+ dev_err(dev, "Failed to get SERDES child DT node\n");
+ return -ENODEV;
+ }
+
+ ret = of_address_to_resource(child_node, 0, &res);
+ if (ret) {
+ dev_err(dev, "Failed to get memory resource\n");
+ goto err_addr_to_resource;
+ }
+
+ base = devm_ioremap(dev, res.start, resource_size(&res));
+ if (!base) {
+ ret = -ENOMEM;
+ goto err_addr_to_resource;
+ }
+
+ regmap = devm_regmap_init_mmio(dev, base, &wiz_regmap_config);
+ if (IS_ERR(regmap)) {
+ dev_err(dev, "Failed to initialize regmap\n");
+ ret = PTR_ERR(regmap);
+ goto err_addr_to_resource;
+ }
+
+ ret = of_property_read_u32(node, "num-lanes", &num_lanes);
+ if (ret) {
+ dev_err(dev, "Failed to read num-lanes property\n");
+ goto err_addr_to_resource;
+ }
+
+ if (num_lanes > WIZ_MAX_LANES) {
+ dev_err(dev, "Cannot support %d lanes\n", num_lanes);
+ ret = -ENODEV;
+ goto err_addr_to_resource;
+ }
+
+ wiz->gpio_typec_dir = devm_gpiod_get_optional(dev, "typec-dir",
+ GPIOD_IN);
+ if (IS_ERR(wiz->gpio_typec_dir)) {
+ ret = PTR_ERR(wiz->gpio_typec_dir);
+ if (ret != -EPROBE_DEFER)
+ dev_err(dev, "Failed to request typec-dir gpio: %d\n",
+ ret);
+ goto err_addr_to_resource;
+ }
+
+ if (wiz->gpio_typec_dir) {
+ ret = of_property_read_u32(node, "typec-dir-debounce-ms",
+ &wiz->typec_dir_delay);
+ if (ret && ret != -EINVAL) {
+ dev_err(dev, "Invalid typec-dir-debounce property\n");
+ goto err_addr_to_resource;
+ }
+
+ /* use min. debounce from Type-C spec if not provided in DT */
+ if (ret == -EINVAL)
+ wiz->typec_dir_delay = WIZ_TYPEC_DIR_DEBOUNCE_MIN;
+
+ if (wiz->typec_dir_delay < WIZ_TYPEC_DIR_DEBOUNCE_MIN ||
+ wiz->typec_dir_delay > WIZ_TYPEC_DIR_DEBOUNCE_MAX) {
+ ret = -EINVAL;
+ dev_err(dev, "Invalid typec-dir-debounce property\n");
+ goto err_addr_to_resource;
+ }
+ }
+
+ ret = wiz_get_lane_phy_types(dev, wiz);
+ if (ret)
+ return ret;
+
+ wiz->dev = dev;
+ wiz->regmap = regmap;
+ wiz->num_lanes = num_lanes;
+ if (wiz->type == J721E_WIZ_10G)
+ wiz->clk_mux_sel = clk_mux_sel_10g;
+ else
+ wiz->clk_mux_sel = clk_mux_sel_16g;
+
+ wiz->clk_div_sel = clk_div_sel;
+
+ if (wiz->type == J721E_WIZ_10G)
+ wiz->clk_div_sel_num = WIZ_DIV_NUM_CLOCKS_10G;
+ else
+ wiz->clk_div_sel_num = WIZ_DIV_NUM_CLOCKS_16G;
+
+ platform_set_drvdata(pdev, wiz);
+
+ ret = wiz_regfield_init(wiz);
+ if (ret) {
+ dev_err(dev, "Failed to initialize regfields\n");
+ goto err_addr_to_resource;
+ }
+
+ phy_reset_dev = &wiz->wiz_phy_reset_dev;
+ phy_reset_dev->dev = dev;
+ phy_reset_dev->ops = &wiz_phy_reset_ops,
+ phy_reset_dev->owner = THIS_MODULE,
+ phy_reset_dev->of_node = node;
+ /* Reset for each of the lane and one for the entire SERDES */
+ phy_reset_dev->nr_resets = num_lanes + 1;
+
+ ret = devm_reset_controller_register(dev, phy_reset_dev);
+ if (ret < 0) {
+ dev_warn(dev, "Failed to register reset controller\n");
+ goto err_addr_to_resource;
+ }
+
+ pm_runtime_enable(dev);
+ ret = pm_runtime_get_sync(dev);
+ if (ret < 0) {
+ dev_err(dev, "pm_runtime_get_sync failed\n");
+ goto err_get_sync;
+ }
+
+ ret = wiz_clock_init(wiz, node);
+ if (ret < 0) {
+ dev_warn(dev, "Failed to initialize clocks\n");
+ goto err_get_sync;
+ }
+
+ ret = wiz_init(wiz);
+ if (ret) {
+ dev_err(dev, "WIZ initialization failed\n");
+ goto err_wiz_init;
+ }
+
+ serdes_pdev = of_platform_device_create(child_node, NULL, dev);
+ if (!serdes_pdev) {
+ dev_WARN(dev, "Unable to create SERDES platform device\n");
+ ret = -ENOMEM;
+ goto err_wiz_init;
+ }
+ wiz->serdes_pdev = serdes_pdev;
+
+ of_node_put(child_node);
+ return 0;
+
+err_wiz_init:
+ wiz_clock_cleanup(wiz, node);
+
+err_get_sync:
+ pm_runtime_put(dev);
+ pm_runtime_disable(dev);
+
+err_addr_to_resource:
+ of_node_put(child_node);
+
+ return ret;
+}
+
+static int wiz_remove(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct device_node *node = dev->of_node;
+ struct platform_device *serdes_pdev;
+ struct wiz *wiz;
+
+ wiz = dev_get_drvdata(dev);
+ serdes_pdev = wiz->serdes_pdev;
+
+ of_platform_device_destroy(&serdes_pdev->dev, NULL);
+ wiz_clock_cleanup(wiz, node);
+ pm_runtime_put(dev);
+ pm_runtime_disable(dev);
+
+ return 0;
+}
+
+static struct platform_driver wiz_driver = {
+ .probe = wiz_probe,
+ .remove = wiz_remove,
+ .driver = {
+ .name = "wiz",
+ .of_match_table = wiz_id_table,
+ },
+};
+module_platform_driver(wiz_driver);
+
+MODULE_AUTHOR("Texas Instruments Inc.");
+MODULE_DESCRIPTION("TI J721E WIZ driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/phy/ti/phy-omap-control.c b/drivers/phy/ti/phy-omap-control.c
new file mode 100644
index 000000000..ccd0e4e00
--- /dev/null
+++ b/drivers/phy/ti/phy-omap-control.c
@@ -0,0 +1,350 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * omap-control-phy.c - The PHY part of control module.
+ *
+ * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com
+ * Author: Kishon Vijay Abraham I <kishon@ti.com>
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/clk.h>
+#include <linux/phy/omap_control_phy.h>
+
+/**
+ * omap_control_pcie_pcs - set the PCS delay count
+ * @dev: the control module device
+ * @delay: 8 bit delay value
+ */
+void omap_control_pcie_pcs(struct device *dev, u8 delay)
+{
+ u32 val;
+ struct omap_control_phy *control_phy;
+
+ if (IS_ERR(dev) || !dev) {
+ pr_err("%s: invalid device\n", __func__);
+ return;
+ }
+
+ control_phy = dev_get_drvdata(dev);
+ if (!control_phy) {
+ dev_err(dev, "%s: invalid control phy device\n", __func__);
+ return;
+ }
+
+ if (control_phy->type != OMAP_CTRL_TYPE_PCIE) {
+ dev_err(dev, "%s: unsupported operation\n", __func__);
+ return;
+ }
+
+ val = readl(control_phy->pcie_pcs);
+ val &= ~(OMAP_CTRL_PCIE_PCS_MASK <<
+ OMAP_CTRL_PCIE_PCS_DELAY_COUNT_SHIFT);
+ val |= (delay << OMAP_CTRL_PCIE_PCS_DELAY_COUNT_SHIFT);
+ writel(val, control_phy->pcie_pcs);
+}
+EXPORT_SYMBOL_GPL(omap_control_pcie_pcs);
+
+/**
+ * omap_control_phy_power - power on/off the phy using control module reg
+ * @dev: the control module device
+ * @on: 0 or 1, based on powering on or off the PHY
+ */
+void omap_control_phy_power(struct device *dev, int on)
+{
+ u32 val;
+ unsigned long rate;
+ struct omap_control_phy *control_phy;
+
+ if (IS_ERR(dev) || !dev) {
+ pr_err("%s: invalid device\n", __func__);
+ return;
+ }
+
+ control_phy = dev_get_drvdata(dev);
+ if (!control_phy) {
+ dev_err(dev, "%s: invalid control phy device\n", __func__);
+ return;
+ }
+
+ if (control_phy->type == OMAP_CTRL_TYPE_OTGHS)
+ return;
+
+ val = readl(control_phy->power);
+
+ switch (control_phy->type) {
+ case OMAP_CTRL_TYPE_USB2:
+ if (on)
+ val &= ~OMAP_CTRL_DEV_PHY_PD;
+ else
+ val |= OMAP_CTRL_DEV_PHY_PD;
+ break;
+
+ case OMAP_CTRL_TYPE_PCIE:
+ case OMAP_CTRL_TYPE_PIPE3:
+ rate = clk_get_rate(control_phy->sys_clk);
+ rate = rate/1000000;
+
+ if (on) {
+ val &= ~(OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_CMD_MASK |
+ OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_FREQ_MASK);
+ val |= OMAP_CTRL_PIPE3_PHY_TX_RX_POWERON <<
+ OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_CMD_SHIFT;
+ val |= rate <<
+ OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_FREQ_SHIFT;
+ } else {
+ val &= ~OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_CMD_MASK;
+ val |= OMAP_CTRL_PIPE3_PHY_TX_RX_POWEROFF <<
+ OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_CMD_SHIFT;
+ }
+ break;
+
+ case OMAP_CTRL_TYPE_DRA7USB2:
+ if (on)
+ val &= ~OMAP_CTRL_USB2_PHY_PD;
+ else
+ val |= OMAP_CTRL_USB2_PHY_PD;
+ break;
+
+ case OMAP_CTRL_TYPE_AM437USB2:
+ if (on) {
+ val &= ~(AM437X_CTRL_USB2_PHY_PD |
+ AM437X_CTRL_USB2_OTG_PD);
+ val |= (AM437X_CTRL_USB2_OTGVDET_EN |
+ AM437X_CTRL_USB2_OTGSESSEND_EN);
+ } else {
+ val &= ~(AM437X_CTRL_USB2_OTGVDET_EN |
+ AM437X_CTRL_USB2_OTGSESSEND_EN);
+ val |= (AM437X_CTRL_USB2_PHY_PD |
+ AM437X_CTRL_USB2_OTG_PD);
+ }
+ break;
+ default:
+ dev_err(dev, "%s: type %d not recognized\n",
+ __func__, control_phy->type);
+ break;
+ }
+
+ writel(val, control_phy->power);
+}
+EXPORT_SYMBOL_GPL(omap_control_phy_power);
+
+/**
+ * omap_control_usb_host_mode - set AVALID, VBUSVALID and ID pin in grounded
+ * @ctrl_phy: struct omap_control_phy *
+ *
+ * Writes to the mailbox register to notify the usb core that a usb
+ * device has been connected.
+ */
+static void omap_control_usb_host_mode(struct omap_control_phy *ctrl_phy)
+{
+ u32 val;
+
+ val = readl(ctrl_phy->otghs_control);
+ val &= ~(OMAP_CTRL_DEV_IDDIG | OMAP_CTRL_DEV_SESSEND);
+ val |= OMAP_CTRL_DEV_AVALID | OMAP_CTRL_DEV_VBUSVALID;
+ writel(val, ctrl_phy->otghs_control);
+}
+
+/**
+ * omap_control_usb_device_mode - set AVALID, VBUSVALID and ID pin in high
+ * impedance
+ * @ctrl_phy: struct omap_control_phy *
+ *
+ * Writes to the mailbox register to notify the usb core that it has been
+ * connected to a usb host.
+ */
+static void omap_control_usb_device_mode(struct omap_control_phy *ctrl_phy)
+{
+ u32 val;
+
+ val = readl(ctrl_phy->otghs_control);
+ val &= ~OMAP_CTRL_DEV_SESSEND;
+ val |= OMAP_CTRL_DEV_IDDIG | OMAP_CTRL_DEV_AVALID |
+ OMAP_CTRL_DEV_VBUSVALID;
+ writel(val, ctrl_phy->otghs_control);
+}
+
+/**
+ * omap_control_usb_set_sessionend - Enable SESSIONEND and IDIG to high
+ * impedance
+ * @ctrl_phy: struct omap_control_phy *
+ *
+ * Writes to the mailbox register to notify the usb core it's now in
+ * disconnected state.
+ */
+static void omap_control_usb_set_sessionend(struct omap_control_phy *ctrl_phy)
+{
+ u32 val;
+
+ val = readl(ctrl_phy->otghs_control);
+ val &= ~(OMAP_CTRL_DEV_AVALID | OMAP_CTRL_DEV_VBUSVALID);
+ val |= OMAP_CTRL_DEV_IDDIG | OMAP_CTRL_DEV_SESSEND;
+ writel(val, ctrl_phy->otghs_control);
+}
+
+/**
+ * omap_control_usb_set_mode - Calls to functions to set USB in one of host mode
+ * or device mode or to denote disconnected state
+ * @dev: the control module device
+ * @mode: The mode to which usb should be configured
+ *
+ * This is an API to write to the mailbox register to notify the usb core that
+ * a usb device has been connected.
+ */
+void omap_control_usb_set_mode(struct device *dev,
+ enum omap_control_usb_mode mode)
+{
+ struct omap_control_phy *ctrl_phy;
+
+ if (IS_ERR(dev) || !dev)
+ return;
+
+ ctrl_phy = dev_get_drvdata(dev);
+ if (!ctrl_phy) {
+ dev_err(dev, "Invalid control phy device\n");
+ return;
+ }
+
+ if (ctrl_phy->type != OMAP_CTRL_TYPE_OTGHS)
+ return;
+
+ switch (mode) {
+ case USB_MODE_HOST:
+ omap_control_usb_host_mode(ctrl_phy);
+ break;
+ case USB_MODE_DEVICE:
+ omap_control_usb_device_mode(ctrl_phy);
+ break;
+ case USB_MODE_DISCONNECT:
+ omap_control_usb_set_sessionend(ctrl_phy);
+ break;
+ default:
+ dev_vdbg(dev, "invalid omap control usb mode\n");
+ }
+}
+EXPORT_SYMBOL_GPL(omap_control_usb_set_mode);
+
+static const enum omap_control_phy_type otghs_data = OMAP_CTRL_TYPE_OTGHS;
+static const enum omap_control_phy_type usb2_data = OMAP_CTRL_TYPE_USB2;
+static const enum omap_control_phy_type pipe3_data = OMAP_CTRL_TYPE_PIPE3;
+static const enum omap_control_phy_type pcie_data = OMAP_CTRL_TYPE_PCIE;
+static const enum omap_control_phy_type dra7usb2_data = OMAP_CTRL_TYPE_DRA7USB2;
+static const enum omap_control_phy_type am437usb2_data = OMAP_CTRL_TYPE_AM437USB2;
+
+static const struct of_device_id omap_control_phy_id_table[] = {
+ {
+ .compatible = "ti,control-phy-otghs",
+ .data = &otghs_data,
+ },
+ {
+ .compatible = "ti,control-phy-usb2",
+ .data = &usb2_data,
+ },
+ {
+ .compatible = "ti,control-phy-pipe3",
+ .data = &pipe3_data,
+ },
+ {
+ .compatible = "ti,control-phy-pcie",
+ .data = &pcie_data,
+ },
+ {
+ .compatible = "ti,control-phy-usb2-dra7",
+ .data = &dra7usb2_data,
+ },
+ {
+ .compatible = "ti,control-phy-usb2-am437",
+ .data = &am437usb2_data,
+ },
+ {},
+};
+MODULE_DEVICE_TABLE(of, omap_control_phy_id_table);
+
+static int omap_control_phy_probe(struct platform_device *pdev)
+{
+ struct resource *res;
+ const struct of_device_id *of_id;
+ struct omap_control_phy *control_phy;
+
+ of_id = of_match_device(omap_control_phy_id_table, &pdev->dev);
+ if (!of_id)
+ return -EINVAL;
+
+ control_phy = devm_kzalloc(&pdev->dev, sizeof(*control_phy),
+ GFP_KERNEL);
+ if (!control_phy)
+ return -ENOMEM;
+
+ control_phy->dev = &pdev->dev;
+ control_phy->type = *(enum omap_control_phy_type *)of_id->data;
+
+ if (control_phy->type == OMAP_CTRL_TYPE_OTGHS) {
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
+ "otghs_control");
+ control_phy->otghs_control = devm_ioremap_resource(
+ &pdev->dev, res);
+ if (IS_ERR(control_phy->otghs_control))
+ return PTR_ERR(control_phy->otghs_control);
+ } else {
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
+ "power");
+ control_phy->power = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(control_phy->power)) {
+ dev_err(&pdev->dev, "Couldn't get power register\n");
+ return PTR_ERR(control_phy->power);
+ }
+ }
+
+ if (control_phy->type == OMAP_CTRL_TYPE_PIPE3 ||
+ control_phy->type == OMAP_CTRL_TYPE_PCIE) {
+ control_phy->sys_clk = devm_clk_get(control_phy->dev,
+ "sys_clkin");
+ if (IS_ERR(control_phy->sys_clk)) {
+ pr_err("%s: unable to get sys_clkin\n", __func__);
+ return -EINVAL;
+ }
+ }
+
+ if (control_phy->type == OMAP_CTRL_TYPE_PCIE) {
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
+ "pcie_pcs");
+ control_phy->pcie_pcs = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(control_phy->pcie_pcs))
+ return PTR_ERR(control_phy->pcie_pcs);
+ }
+
+ dev_set_drvdata(control_phy->dev, control_phy);
+
+ return 0;
+}
+
+static struct platform_driver omap_control_phy_driver = {
+ .probe = omap_control_phy_probe,
+ .driver = {
+ .name = "omap-control-phy",
+ .of_match_table = omap_control_phy_id_table,
+ },
+};
+
+static int __init omap_control_phy_init(void)
+{
+ return platform_driver_register(&omap_control_phy_driver);
+}
+subsys_initcall(omap_control_phy_init);
+
+static void __exit omap_control_phy_exit(void)
+{
+ platform_driver_unregister(&omap_control_phy_driver);
+}
+module_exit(omap_control_phy_exit);
+
+MODULE_ALIAS("platform:omap_control_phy");
+MODULE_AUTHOR("Texas Instruments Inc.");
+MODULE_DESCRIPTION("OMAP Control Module PHY Driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/phy/ti/phy-omap-usb2.c b/drivers/phy/ti/phy-omap-usb2.c
new file mode 100644
index 000000000..f77ac041d
--- /dev/null
+++ b/drivers/phy/ti/phy-omap-usb2.c
@@ -0,0 +1,535 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * omap-usb2.c - USB PHY, talking to USB controller on TI SoCs.
+ *
+ * Copyright (C) 2012-2020 Texas Instruments Incorporated - http://www.ti.com
+ * Author: Kishon Vijay Abraham I <kishon@ti.com>
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/phy/omap_control_phy.h>
+#include <linux/phy/omap_usb.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+#include <linux/sys_soc.h>
+#include <linux/usb/phy_companion.h>
+
+#define USB2PHY_ANA_CONFIG1 0x4c
+#define USB2PHY_DISCON_BYP_LATCH BIT(31)
+
+#define USB2PHY_CHRG_DET 0x14
+#define USB2PHY_CHRG_DET_USE_CHG_DET_REG BIT(29)
+#define USB2PHY_CHRG_DET_DIS_CHG_DET BIT(28)
+
+/* SoC Specific USB2_OTG register definitions */
+#define AM654_USB2_OTG_PD BIT(8)
+#define AM654_USB2_VBUS_DET_EN BIT(5)
+#define AM654_USB2_VBUSVALID_DET_EN BIT(4)
+
+#define OMAP_DEV_PHY_PD BIT(0)
+#define OMAP_USB2_PHY_PD BIT(28)
+
+#define AM437X_USB2_PHY_PD BIT(0)
+#define AM437X_USB2_OTG_PD BIT(1)
+#define AM437X_USB2_OTGVDET_EN BIT(19)
+#define AM437X_USB2_OTGSESSEND_EN BIT(20)
+
+/* Driver Flags */
+#define OMAP_USB2_HAS_START_SRP BIT(0)
+#define OMAP_USB2_HAS_SET_VBUS BIT(1)
+#define OMAP_USB2_CALIBRATE_FALSE_DISCONNECT BIT(2)
+#define OMAP_USB2_DISABLE_CHRG_DET BIT(3)
+
+struct omap_usb {
+ struct usb_phy phy;
+ struct phy_companion *comparator;
+ void __iomem *pll_ctrl_base;
+ void __iomem *phy_base;
+ struct device *dev;
+ struct device *control_dev;
+ struct clk *wkupclk;
+ struct clk *optclk;
+ u8 flags;
+ struct regmap *syscon_phy_power; /* ctrl. reg. acces */
+ unsigned int power_reg; /* power reg. index within syscon */
+ u32 mask;
+ u32 power_on;
+ u32 power_off;
+};
+
+#define phy_to_omapusb(x) container_of((x), struct omap_usb, phy)
+
+struct usb_phy_data {
+ const char *label;
+ u8 flags;
+ u32 mask;
+ u32 power_on;
+ u32 power_off;
+};
+
+static inline u32 omap_usb_readl(void __iomem *addr, unsigned int offset)
+{
+ return __raw_readl(addr + offset);
+}
+
+static inline void omap_usb_writel(void __iomem *addr, unsigned int offset,
+ u32 data)
+{
+ __raw_writel(data, addr + offset);
+}
+
+/**
+ * omap_usb2_set_comparator - links the comparator present in the system with
+ * this phy
+ * @comparator - the companion phy(comparator) for this phy
+ *
+ * The phy companion driver should call this API passing the phy_companion
+ * filled with set_vbus and start_srp to be used by usb phy.
+ *
+ * For use by phy companion driver
+ */
+int omap_usb2_set_comparator(struct phy_companion *comparator)
+{
+ struct omap_usb *phy;
+ struct usb_phy *x = usb_get_phy(USB_PHY_TYPE_USB2);
+
+ if (IS_ERR(x))
+ return -ENODEV;
+
+ phy = phy_to_omapusb(x);
+ phy->comparator = comparator;
+ return 0;
+}
+EXPORT_SYMBOL_GPL(omap_usb2_set_comparator);
+
+static int omap_usb_set_vbus(struct usb_otg *otg, bool enabled)
+{
+ struct omap_usb *phy = phy_to_omapusb(otg->usb_phy);
+
+ if (!phy->comparator)
+ return -ENODEV;
+
+ return phy->comparator->set_vbus(phy->comparator, enabled);
+}
+
+static int omap_usb_start_srp(struct usb_otg *otg)
+{
+ struct omap_usb *phy = phy_to_omapusb(otg->usb_phy);
+
+ if (!phy->comparator)
+ return -ENODEV;
+
+ return phy->comparator->start_srp(phy->comparator);
+}
+
+static int omap_usb_set_host(struct usb_otg *otg, struct usb_bus *host)
+{
+ otg->host = host;
+ if (!host)
+ otg->state = OTG_STATE_UNDEFINED;
+
+ return 0;
+}
+
+static int omap_usb_set_peripheral(struct usb_otg *otg,
+ struct usb_gadget *gadget)
+{
+ otg->gadget = gadget;
+ if (!gadget)
+ otg->state = OTG_STATE_UNDEFINED;
+
+ return 0;
+}
+
+static int omap_usb_phy_power(struct omap_usb *phy, int on)
+{
+ u32 val;
+ int ret;
+
+ if (!phy->syscon_phy_power) {
+ omap_control_phy_power(phy->control_dev, on);
+ return 0;
+ }
+
+ if (on)
+ val = phy->power_on;
+ else
+ val = phy->power_off;
+
+ ret = regmap_update_bits(phy->syscon_phy_power, phy->power_reg,
+ phy->mask, val);
+ return ret;
+}
+
+static int omap_usb_power_off(struct phy *x)
+{
+ struct omap_usb *phy = phy_get_drvdata(x);
+
+ return omap_usb_phy_power(phy, false);
+}
+
+static int omap_usb_power_on(struct phy *x)
+{
+ struct omap_usb *phy = phy_get_drvdata(x);
+
+ return omap_usb_phy_power(phy, true);
+}
+
+static int omap_usb2_disable_clocks(struct omap_usb *phy)
+{
+ clk_disable_unprepare(phy->wkupclk);
+ if (!IS_ERR(phy->optclk))
+ clk_disable_unprepare(phy->optclk);
+
+ return 0;
+}
+
+static int omap_usb2_enable_clocks(struct omap_usb *phy)
+{
+ int ret;
+
+ ret = clk_prepare_enable(phy->wkupclk);
+ if (ret < 0) {
+ dev_err(phy->dev, "Failed to enable wkupclk %d\n", ret);
+ goto err0;
+ }
+
+ if (!IS_ERR(phy->optclk)) {
+ ret = clk_prepare_enable(phy->optclk);
+ if (ret < 0) {
+ dev_err(phy->dev, "Failed to enable optclk %d\n", ret);
+ goto err1;
+ }
+ }
+
+ return 0;
+
+err1:
+ clk_disable_unprepare(phy->wkupclk);
+
+err0:
+ return ret;
+}
+
+static int omap_usb_init(struct phy *x)
+{
+ struct omap_usb *phy = phy_get_drvdata(x);
+ u32 val;
+
+ omap_usb2_enable_clocks(phy);
+
+ if (phy->flags & OMAP_USB2_CALIBRATE_FALSE_DISCONNECT) {
+ /*
+ *
+ * Reduce the sensitivity of internal PHY by enabling the
+ * DISCON_BYP_LATCH of the USB2PHY_ANA_CONFIG1 register. This
+ * resolves issues with certain devices which can otherwise
+ * be prone to false disconnects.
+ *
+ */
+ val = omap_usb_readl(phy->phy_base, USB2PHY_ANA_CONFIG1);
+ val |= USB2PHY_DISCON_BYP_LATCH;
+ omap_usb_writel(phy->phy_base, USB2PHY_ANA_CONFIG1, val);
+ }
+
+ if (phy->flags & OMAP_USB2_DISABLE_CHRG_DET) {
+ val = omap_usb_readl(phy->phy_base, USB2PHY_CHRG_DET);
+ val |= USB2PHY_CHRG_DET_USE_CHG_DET_REG |
+ USB2PHY_CHRG_DET_DIS_CHG_DET;
+ omap_usb_writel(phy->phy_base, USB2PHY_CHRG_DET, val);
+ }
+
+ return 0;
+}
+
+static int omap_usb_exit(struct phy *x)
+{
+ struct omap_usb *phy = phy_get_drvdata(x);
+
+ return omap_usb2_disable_clocks(phy);
+}
+
+static const struct phy_ops ops = {
+ .init = omap_usb_init,
+ .exit = omap_usb_exit,
+ .power_on = omap_usb_power_on,
+ .power_off = omap_usb_power_off,
+ .owner = THIS_MODULE,
+};
+
+static const struct usb_phy_data omap_usb2_data = {
+ .label = "omap_usb2",
+ .flags = OMAP_USB2_HAS_START_SRP | OMAP_USB2_HAS_SET_VBUS,
+ .mask = OMAP_DEV_PHY_PD,
+ .power_off = OMAP_DEV_PHY_PD,
+};
+
+static const struct usb_phy_data omap5_usb2_data = {
+ .label = "omap5_usb2",
+ .flags = 0,
+ .mask = OMAP_DEV_PHY_PD,
+ .power_off = OMAP_DEV_PHY_PD,
+};
+
+static const struct usb_phy_data dra7x_usb2_data = {
+ .label = "dra7x_usb2",
+ .flags = OMAP_USB2_CALIBRATE_FALSE_DISCONNECT,
+ .mask = OMAP_DEV_PHY_PD,
+ .power_off = OMAP_DEV_PHY_PD,
+};
+
+static const struct usb_phy_data dra7x_usb2_phy2_data = {
+ .label = "dra7x_usb2_phy2",
+ .flags = OMAP_USB2_CALIBRATE_FALSE_DISCONNECT,
+ .mask = OMAP_USB2_PHY_PD,
+ .power_off = OMAP_USB2_PHY_PD,
+};
+
+static const struct usb_phy_data am437x_usb2_data = {
+ .label = "am437x_usb2",
+ .flags = 0,
+ .mask = AM437X_USB2_PHY_PD | AM437X_USB2_OTG_PD |
+ AM437X_USB2_OTGVDET_EN | AM437X_USB2_OTGSESSEND_EN,
+ .power_on = AM437X_USB2_OTGVDET_EN | AM437X_USB2_OTGSESSEND_EN,
+ .power_off = AM437X_USB2_PHY_PD | AM437X_USB2_OTG_PD,
+};
+
+static const struct usb_phy_data am654_usb2_data = {
+ .label = "am654_usb2",
+ .flags = OMAP_USB2_CALIBRATE_FALSE_DISCONNECT,
+ .mask = AM654_USB2_OTG_PD | AM654_USB2_VBUS_DET_EN |
+ AM654_USB2_VBUSVALID_DET_EN,
+ .power_on = AM654_USB2_VBUS_DET_EN | AM654_USB2_VBUSVALID_DET_EN,
+ .power_off = AM654_USB2_OTG_PD,
+};
+
+static const struct of_device_id omap_usb2_id_table[] = {
+ {
+ .compatible = "ti,omap-usb2",
+ .data = &omap_usb2_data,
+ },
+ {
+ .compatible = "ti,omap5-usb2",
+ .data = &omap5_usb2_data,
+ },
+ {
+ .compatible = "ti,dra7x-usb2",
+ .data = &dra7x_usb2_data,
+ },
+ {
+ .compatible = "ti,dra7x-usb2-phy2",
+ .data = &dra7x_usb2_phy2_data,
+ },
+ {
+ .compatible = "ti,am437x-usb2",
+ .data = &am437x_usb2_data,
+ },
+ {
+ .compatible = "ti,am654-usb2",
+ .data = &am654_usb2_data,
+ },
+ {},
+};
+MODULE_DEVICE_TABLE(of, omap_usb2_id_table);
+
+static void omap_usb2_init_errata(struct omap_usb *phy)
+{
+ static const struct soc_device_attribute am65x_sr10_soc_devices[] = {
+ { .family = "AM65X", .revision = "SR1.0" },
+ { /* sentinel */ }
+ };
+
+ /*
+ * Errata i2075: USB2PHY: USB2PHY Charger Detect is Enabled by
+ * Default Without VBUS Presence.
+ *
+ * AM654x SR1.0 has a silicon bug due to which D+ is pulled high after
+ * POR, which could cause enumeration failure with some USB hubs.
+ * Disabling the USB2_PHY Charger Detect function will put D+
+ * into the normal state.
+ */
+ if (soc_device_match(am65x_sr10_soc_devices))
+ phy->flags |= OMAP_USB2_DISABLE_CHRG_DET;
+}
+
+static int omap_usb2_probe(struct platform_device *pdev)
+{
+ struct omap_usb *phy;
+ struct phy *generic_phy;
+ struct resource *res;
+ struct phy_provider *phy_provider;
+ struct usb_otg *otg;
+ struct device_node *node = pdev->dev.of_node;
+ struct device_node *control_node;
+ struct platform_device *control_pdev;
+ const struct of_device_id *of_id;
+ struct usb_phy_data *phy_data;
+
+ of_id = of_match_device(omap_usb2_id_table, &pdev->dev);
+
+ if (!of_id)
+ return -EINVAL;
+
+ phy_data = (struct usb_phy_data *)of_id->data;
+
+ phy = devm_kzalloc(&pdev->dev, sizeof(*phy), GFP_KERNEL);
+ if (!phy)
+ return -ENOMEM;
+
+ otg = devm_kzalloc(&pdev->dev, sizeof(*otg), GFP_KERNEL);
+ if (!otg)
+ return -ENOMEM;
+
+ phy->dev = &pdev->dev;
+
+ phy->phy.dev = phy->dev;
+ phy->phy.label = phy_data->label;
+ phy->phy.otg = otg;
+ phy->phy.type = USB_PHY_TYPE_USB2;
+ phy->mask = phy_data->mask;
+ phy->power_on = phy_data->power_on;
+ phy->power_off = phy_data->power_off;
+ phy->flags = phy_data->flags;
+
+ omap_usb2_init_errata(phy);
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ phy->phy_base = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(phy->phy_base))
+ return PTR_ERR(phy->phy_base);
+
+ phy->syscon_phy_power = syscon_regmap_lookup_by_phandle(node,
+ "syscon-phy-power");
+ if (IS_ERR(phy->syscon_phy_power)) {
+ dev_dbg(&pdev->dev,
+ "can't get syscon-phy-power, using control device\n");
+ phy->syscon_phy_power = NULL;
+
+ control_node = of_parse_phandle(node, "ctrl-module", 0);
+ if (!control_node) {
+ dev_err(&pdev->dev,
+ "Failed to get control device phandle\n");
+ return -EINVAL;
+ }
+
+ control_pdev = of_find_device_by_node(control_node);
+ if (!control_pdev) {
+ dev_err(&pdev->dev, "Failed to get control device\n");
+ return -EINVAL;
+ }
+ phy->control_dev = &control_pdev->dev;
+ } else {
+ if (of_property_read_u32_index(node,
+ "syscon-phy-power", 1,
+ &phy->power_reg)) {
+ dev_err(&pdev->dev,
+ "couldn't get power reg. offset\n");
+ return -EINVAL;
+ }
+ }
+
+ phy->wkupclk = devm_clk_get(phy->dev, "wkupclk");
+ if (IS_ERR(phy->wkupclk)) {
+ if (PTR_ERR(phy->wkupclk) == -EPROBE_DEFER)
+ return -EPROBE_DEFER;
+
+ dev_warn(&pdev->dev, "unable to get wkupclk %ld, trying old name\n",
+ PTR_ERR(phy->wkupclk));
+ phy->wkupclk = devm_clk_get(phy->dev, "usb_phy_cm_clk32k");
+
+ if (IS_ERR(phy->wkupclk)) {
+ if (PTR_ERR(phy->wkupclk) != -EPROBE_DEFER)
+ dev_err(&pdev->dev, "unable to get usb_phy_cm_clk32k\n");
+ return PTR_ERR(phy->wkupclk);
+ }
+
+ dev_warn(&pdev->dev,
+ "found usb_phy_cm_clk32k, please fix DTS\n");
+ }
+
+ phy->optclk = devm_clk_get(phy->dev, "refclk");
+ if (IS_ERR(phy->optclk)) {
+ if (PTR_ERR(phy->optclk) == -EPROBE_DEFER)
+ return -EPROBE_DEFER;
+
+ dev_dbg(&pdev->dev, "unable to get refclk, trying old name\n");
+ phy->optclk = devm_clk_get(phy->dev, "usb_otg_ss_refclk960m");
+
+ if (IS_ERR(phy->optclk)) {
+ if (PTR_ERR(phy->optclk) != -EPROBE_DEFER) {
+ dev_dbg(&pdev->dev,
+ "unable to get usb_otg_ss_refclk960m\n");
+ }
+ } else {
+ dev_warn(&pdev->dev,
+ "found usb_otg_ss_refclk960m, please fix DTS\n");
+ }
+ }
+
+ otg->set_host = omap_usb_set_host;
+ otg->set_peripheral = omap_usb_set_peripheral;
+ if (phy_data->flags & OMAP_USB2_HAS_SET_VBUS)
+ otg->set_vbus = omap_usb_set_vbus;
+ if (phy_data->flags & OMAP_USB2_HAS_START_SRP)
+ otg->start_srp = omap_usb_start_srp;
+ otg->usb_phy = &phy->phy;
+
+ platform_set_drvdata(pdev, phy);
+ pm_runtime_enable(phy->dev);
+
+ generic_phy = devm_phy_create(phy->dev, NULL, &ops);
+ if (IS_ERR(generic_phy)) {
+ pm_runtime_disable(phy->dev);
+ return PTR_ERR(generic_phy);
+ }
+
+ phy_set_drvdata(generic_phy, phy);
+ omap_usb_power_off(generic_phy);
+
+ phy_provider = devm_of_phy_provider_register(phy->dev,
+ of_phy_simple_xlate);
+ if (IS_ERR(phy_provider)) {
+ pm_runtime_disable(phy->dev);
+ return PTR_ERR(phy_provider);
+ }
+
+ usb_add_phy_dev(&phy->phy);
+
+ return 0;
+}
+
+static int omap_usb2_remove(struct platform_device *pdev)
+{
+ struct omap_usb *phy = platform_get_drvdata(pdev);
+
+ usb_remove_phy(&phy->phy);
+ pm_runtime_disable(phy->dev);
+
+ return 0;
+}
+
+static struct platform_driver omap_usb2_driver = {
+ .probe = omap_usb2_probe,
+ .remove = omap_usb2_remove,
+ .driver = {
+ .name = "omap-usb2",
+ .of_match_table = omap_usb2_id_table,
+ },
+};
+
+module_platform_driver(omap_usb2_driver);
+
+MODULE_ALIAS("platform:omap_usb2");
+MODULE_AUTHOR("Texas Instruments Inc.");
+MODULE_DESCRIPTION("OMAP USB2 phy driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/phy/ti/phy-ti-pipe3.c b/drivers/phy/ti/phy-ti-pipe3.c
new file mode 100644
index 000000000..e9332c90f
--- /dev/null
+++ b/drivers/phy/ti/phy-ti-pipe3.c
@@ -0,0 +1,949 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * phy-ti-pipe3 - PIPE3 PHY driver.
+ *
+ * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com
+ * Author: Kishon Vijay Abraham I <kishon@ti.com>
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/phy/phy.h>
+#include <linux/of.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/pm_runtime.h>
+#include <linux/delay.h>
+#include <linux/phy/omap_control_phy.h>
+#include <linux/of_platform.h>
+#include <linux/mfd/syscon.h>
+#include <linux/regmap.h>
+
+#define PLL_STATUS 0x00000004
+#define PLL_GO 0x00000008
+#define PLL_CONFIGURATION1 0x0000000C
+#define PLL_CONFIGURATION2 0x00000010
+#define PLL_CONFIGURATION3 0x00000014
+#define PLL_CONFIGURATION4 0x00000020
+
+#define PLL_REGM_MASK 0x001FFE00
+#define PLL_REGM_SHIFT 0x9
+#define PLL_REGM_F_MASK 0x0003FFFF
+#define PLL_REGM_F_SHIFT 0x0
+#define PLL_REGN_MASK 0x000001FE
+#define PLL_REGN_SHIFT 0x1
+#define PLL_SELFREQDCO_MASK 0x0000000E
+#define PLL_SELFREQDCO_SHIFT 0x1
+#define PLL_SD_MASK 0x0003FC00
+#define PLL_SD_SHIFT 10
+#define SET_PLL_GO 0x1
+#define PLL_LDOPWDN BIT(15)
+#define PLL_TICOPWDN BIT(16)
+#define PLL_LOCK 0x2
+#define PLL_IDLE 0x1
+
+#define SATA_PLL_SOFT_RESET BIT(18)
+
+#define PIPE3_PHY_PWRCTL_CLK_CMD_MASK GENMASK(21, 14)
+#define PIPE3_PHY_PWRCTL_CLK_CMD_SHIFT 14
+
+#define PIPE3_PHY_PWRCTL_CLK_FREQ_MASK GENMASK(31, 22)
+#define PIPE3_PHY_PWRCTL_CLK_FREQ_SHIFT 22
+
+#define PIPE3_PHY_RX_POWERON (0x1 << PIPE3_PHY_PWRCTL_CLK_CMD_SHIFT)
+#define PIPE3_PHY_TX_POWERON (0x2 << PIPE3_PHY_PWRCTL_CLK_CMD_SHIFT)
+
+#define PCIE_PCS_MASK 0xFF0000
+#define PCIE_PCS_DELAY_COUNT_SHIFT 0x10
+
+#define PIPE3_PHY_RX_ANA_PROGRAMMABILITY 0x0000000C
+#define INTERFACE_MASK GENMASK(31, 27)
+#define INTERFACE_SHIFT 27
+#define INTERFACE_MODE_USBSS BIT(4)
+#define INTERFACE_MODE_SATA_1P5 BIT(3)
+#define INTERFACE_MODE_SATA_3P0 BIT(2)
+#define INTERFACE_MODE_PCIE BIT(0)
+
+#define LOSD_MASK GENMASK(17, 14)
+#define LOSD_SHIFT 14
+#define MEM_PLLDIV GENMASK(6, 5)
+
+#define PIPE3_PHY_RX_TRIM 0x0000001C
+#define MEM_DLL_TRIM_SEL_MASK GENMASK(31, 30)
+#define MEM_DLL_TRIM_SHIFT 30
+
+#define PIPE3_PHY_RX_DLL 0x00000024
+#define MEM_DLL_PHINT_RATE_MASK GENMASK(31, 30)
+#define MEM_DLL_PHINT_RATE_SHIFT 30
+
+#define PIPE3_PHY_RX_DIGITAL_MODES 0x00000028
+#define MEM_HS_RATE_MASK GENMASK(28, 27)
+#define MEM_HS_RATE_SHIFT 27
+#define MEM_OVRD_HS_RATE BIT(26)
+#define MEM_OVRD_HS_RATE_SHIFT 26
+#define MEM_CDR_FASTLOCK BIT(23)
+#define MEM_CDR_FASTLOCK_SHIFT 23
+#define MEM_CDR_LBW_MASK GENMASK(22, 21)
+#define MEM_CDR_LBW_SHIFT 21
+#define MEM_CDR_STEPCNT_MASK GENMASK(20, 19)
+#define MEM_CDR_STEPCNT_SHIFT 19
+#define MEM_CDR_STL_MASK GENMASK(18, 16)
+#define MEM_CDR_STL_SHIFT 16
+#define MEM_CDR_THR_MASK GENMASK(15, 13)
+#define MEM_CDR_THR_SHIFT 13
+#define MEM_CDR_THR_MODE BIT(12)
+#define MEM_CDR_THR_MODE_SHIFT 12
+#define MEM_CDR_2NDO_SDM_MODE BIT(11)
+#define MEM_CDR_2NDO_SDM_MODE_SHIFT 11
+
+#define PIPE3_PHY_RX_EQUALIZER 0x00000038
+#define MEM_EQLEV_MASK GENMASK(31, 16)
+#define MEM_EQLEV_SHIFT 16
+#define MEM_EQFTC_MASK GENMASK(15, 11)
+#define MEM_EQFTC_SHIFT 11
+#define MEM_EQCTL_MASK GENMASK(10, 7)
+#define MEM_EQCTL_SHIFT 7
+#define MEM_OVRD_EQLEV BIT(2)
+#define MEM_OVRD_EQLEV_SHIFT 2
+#define MEM_OVRD_EQFTC BIT(1)
+#define MEM_OVRD_EQFTC_SHIFT 1
+
+#define SATA_PHY_RX_IO_AND_A2D_OVERRIDES 0x44
+#define MEM_CDR_LOS_SOURCE_MASK GENMASK(10, 9)
+#define MEM_CDR_LOS_SOURCE_SHIFT 9
+
+/*
+ * This is an Empirical value that works, need to confirm the actual
+ * value required for the PIPE3PHY_PLL_CONFIGURATION2.PLL_IDLE status
+ * to be correctly reflected in the PIPE3PHY_PLL_STATUS register.
+ */
+#define PLL_IDLE_TIME 100 /* in milliseconds */
+#define PLL_LOCK_TIME 100 /* in milliseconds */
+
+enum pipe3_mode { PIPE3_MODE_PCIE = 1,
+ PIPE3_MODE_SATA,
+ PIPE3_MODE_USBSS };
+
+struct pipe3_dpll_params {
+ u16 m;
+ u8 n;
+ u8 freq:3;
+ u8 sd;
+ u32 mf;
+};
+
+struct pipe3_dpll_map {
+ unsigned long rate;
+ struct pipe3_dpll_params params;
+};
+
+struct pipe3_settings {
+ u8 ana_interface;
+ u8 ana_losd;
+ u8 dig_fastlock;
+ u8 dig_lbw;
+ u8 dig_stepcnt;
+ u8 dig_stl;
+ u8 dig_thr;
+ u8 dig_thr_mode;
+ u8 dig_2ndo_sdm_mode;
+ u8 dig_hs_rate;
+ u8 dig_ovrd_hs_rate;
+ u8 dll_trim_sel;
+ u8 dll_phint_rate;
+ u8 eq_lev;
+ u8 eq_ftc;
+ u8 eq_ctl;
+ u8 eq_ovrd_lev;
+ u8 eq_ovrd_ftc;
+};
+
+struct ti_pipe3 {
+ void __iomem *pll_ctrl_base;
+ void __iomem *phy_rx;
+ void __iomem *phy_tx;
+ struct device *dev;
+ struct device *control_dev;
+ struct clk *wkupclk;
+ struct clk *sys_clk;
+ struct clk *refclk;
+ struct clk *div_clk;
+ struct pipe3_dpll_map *dpll_map;
+ struct regmap *phy_power_syscon; /* ctrl. reg. acces */
+ struct regmap *pcs_syscon; /* ctrl. reg. acces */
+ struct regmap *dpll_reset_syscon; /* ctrl. reg. acces */
+ unsigned int dpll_reset_reg; /* reg. index within syscon */
+ unsigned int power_reg; /* power reg. index within syscon */
+ unsigned int pcie_pcs_reg; /* pcs reg. index in syscon */
+ bool sata_refclk_enabled;
+ enum pipe3_mode mode;
+ struct pipe3_settings settings;
+};
+
+static struct pipe3_dpll_map dpll_map_usb[] = {
+ {12000000, {1250, 5, 4, 20, 0} }, /* 12 MHz */
+ {16800000, {3125, 20, 4, 20, 0} }, /* 16.8 MHz */
+ {19200000, {1172, 8, 4, 20, 65537} }, /* 19.2 MHz */
+ {20000000, {1000, 7, 4, 10, 0} }, /* 20 MHz */
+ {26000000, {1250, 12, 4, 20, 0} }, /* 26 MHz */
+ {38400000, {3125, 47, 4, 20, 92843} }, /* 38.4 MHz */
+ { }, /* Terminator */
+};
+
+static struct pipe3_dpll_map dpll_map_sata[] = {
+ {12000000, {625, 4, 4, 6, 0} }, /* 12 MHz */
+ {16800000, {625, 6, 4, 7, 0} }, /* 16.8 MHz */
+ {19200000, {625, 7, 4, 6, 0} }, /* 19.2 MHz */
+ {20000000, {750, 9, 4, 6, 0} }, /* 20 MHz */
+ {26000000, {750, 12, 4, 6, 0} }, /* 26 MHz */
+ {38400000, {625, 15, 4, 6, 0} }, /* 38.4 MHz */
+ { }, /* Terminator */
+};
+
+struct pipe3_data {
+ enum pipe3_mode mode;
+ struct pipe3_dpll_map *dpll_map;
+ struct pipe3_settings settings;
+};
+
+static struct pipe3_data data_usb = {
+ .mode = PIPE3_MODE_USBSS,
+ .dpll_map = dpll_map_usb,
+ .settings = {
+ /* DRA75x TRM Table 26-17 Preferred USB3_PHY_RX SCP Register Settings */
+ .ana_interface = INTERFACE_MODE_USBSS,
+ .ana_losd = 0xa,
+ .dig_fastlock = 1,
+ .dig_lbw = 3,
+ .dig_stepcnt = 0,
+ .dig_stl = 0x3,
+ .dig_thr = 1,
+ .dig_thr_mode = 1,
+ .dig_2ndo_sdm_mode = 0,
+ .dig_hs_rate = 0,
+ .dig_ovrd_hs_rate = 1,
+ .dll_trim_sel = 0x2,
+ .dll_phint_rate = 0x3,
+ .eq_lev = 0,
+ .eq_ftc = 0,
+ .eq_ctl = 0x9,
+ .eq_ovrd_lev = 0,
+ .eq_ovrd_ftc = 0,
+ },
+};
+
+static struct pipe3_data data_sata = {
+ .mode = PIPE3_MODE_SATA,
+ .dpll_map = dpll_map_sata,
+ .settings = {
+ /* DRA75x TRM Table 26-9 Preferred SATA_PHY_RX SCP Register Settings */
+ .ana_interface = INTERFACE_MODE_SATA_3P0,
+ .ana_losd = 0x5,
+ .dig_fastlock = 1,
+ .dig_lbw = 3,
+ .dig_stepcnt = 0,
+ .dig_stl = 0x3,
+ .dig_thr = 1,
+ .dig_thr_mode = 1,
+ .dig_2ndo_sdm_mode = 0,
+ .dig_hs_rate = 0, /* Not in TRM preferred settings */
+ .dig_ovrd_hs_rate = 0, /* Not in TRM preferred settings */
+ .dll_trim_sel = 0x1,
+ .dll_phint_rate = 0x2, /* for 1.5 GHz DPLL clock */
+ .eq_lev = 0,
+ .eq_ftc = 0x1f,
+ .eq_ctl = 0,
+ .eq_ovrd_lev = 1,
+ .eq_ovrd_ftc = 1,
+ },
+};
+
+static struct pipe3_data data_pcie = {
+ .mode = PIPE3_MODE_PCIE,
+ .settings = {
+ /* DRA75x TRM Table 26-62 Preferred PCIe_PHY_RX SCP Register Settings */
+ .ana_interface = INTERFACE_MODE_PCIE,
+ .ana_losd = 0xa,
+ .dig_fastlock = 1,
+ .dig_lbw = 3,
+ .dig_stepcnt = 0,
+ .dig_stl = 0x3,
+ .dig_thr = 1,
+ .dig_thr_mode = 1,
+ .dig_2ndo_sdm_mode = 0,
+ .dig_hs_rate = 0,
+ .dig_ovrd_hs_rate = 0,
+ .dll_trim_sel = 0x2,
+ .dll_phint_rate = 0x3,
+ .eq_lev = 0,
+ .eq_ftc = 0x1f,
+ .eq_ctl = 1,
+ .eq_ovrd_lev = 0,
+ .eq_ovrd_ftc = 0,
+ },
+};
+
+static inline u32 ti_pipe3_readl(void __iomem *addr, unsigned offset)
+{
+ return __raw_readl(addr + offset);
+}
+
+static inline void ti_pipe3_writel(void __iomem *addr, unsigned offset,
+ u32 data)
+{
+ __raw_writel(data, addr + offset);
+}
+
+static struct pipe3_dpll_params *ti_pipe3_get_dpll_params(struct ti_pipe3 *phy)
+{
+ unsigned long rate;
+ struct pipe3_dpll_map *dpll_map = phy->dpll_map;
+
+ rate = clk_get_rate(phy->sys_clk);
+
+ for (; dpll_map->rate; dpll_map++) {
+ if (rate == dpll_map->rate)
+ return &dpll_map->params;
+ }
+
+ dev_err(phy->dev, "No DPLL configuration for %lu Hz SYS CLK\n", rate);
+
+ return NULL;
+}
+
+static int ti_pipe3_enable_clocks(struct ti_pipe3 *phy);
+static void ti_pipe3_disable_clocks(struct ti_pipe3 *phy);
+
+static int ti_pipe3_power_off(struct phy *x)
+{
+ int ret;
+ struct ti_pipe3 *phy = phy_get_drvdata(x);
+
+ if (!phy->phy_power_syscon) {
+ omap_control_phy_power(phy->control_dev, 0);
+ return 0;
+ }
+
+ ret = regmap_update_bits(phy->phy_power_syscon, phy->power_reg,
+ PIPE3_PHY_PWRCTL_CLK_CMD_MASK, 0);
+ return ret;
+}
+
+static void ti_pipe3_calibrate(struct ti_pipe3 *phy);
+
+static int ti_pipe3_power_on(struct phy *x)
+{
+ u32 val;
+ u32 mask;
+ unsigned long rate;
+ struct ti_pipe3 *phy = phy_get_drvdata(x);
+ bool rx_pending = false;
+
+ if (!phy->phy_power_syscon) {
+ omap_control_phy_power(phy->control_dev, 1);
+ return 0;
+ }
+
+ rate = clk_get_rate(phy->sys_clk);
+ if (!rate) {
+ dev_err(phy->dev, "Invalid clock rate\n");
+ return -EINVAL;
+ }
+ rate = rate / 1000000;
+ mask = OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_FREQ_MASK;
+ val = rate << OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_FREQ_SHIFT;
+ regmap_update_bits(phy->phy_power_syscon, phy->power_reg,
+ mask, val);
+ /*
+ * For PCIe, TX and RX must be powered on simultaneously.
+ * For USB and SATA, TX must be powered on before RX
+ */
+ mask = OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_CMD_MASK;
+ if (phy->mode == PIPE3_MODE_SATA || phy->mode == PIPE3_MODE_USBSS) {
+ val = PIPE3_PHY_TX_POWERON;
+ rx_pending = true;
+ } else {
+ val = PIPE3_PHY_TX_POWERON | PIPE3_PHY_RX_POWERON;
+ }
+
+ regmap_update_bits(phy->phy_power_syscon, phy->power_reg,
+ mask, val);
+
+ if (rx_pending) {
+ val = PIPE3_PHY_TX_POWERON | PIPE3_PHY_RX_POWERON;
+ regmap_update_bits(phy->phy_power_syscon, phy->power_reg,
+ mask, val);
+ }
+
+ if (phy->mode == PIPE3_MODE_PCIE)
+ ti_pipe3_calibrate(phy);
+
+ return 0;
+}
+
+static int ti_pipe3_dpll_wait_lock(struct ti_pipe3 *phy)
+{
+ u32 val;
+ unsigned long timeout;
+
+ timeout = jiffies + msecs_to_jiffies(PLL_LOCK_TIME);
+ do {
+ cpu_relax();
+ val = ti_pipe3_readl(phy->pll_ctrl_base, PLL_STATUS);
+ if (val & PLL_LOCK)
+ return 0;
+ } while (!time_after(jiffies, timeout));
+
+ dev_err(phy->dev, "DPLL failed to lock\n");
+ return -EBUSY;
+}
+
+static int ti_pipe3_dpll_program(struct ti_pipe3 *phy)
+{
+ u32 val;
+ struct pipe3_dpll_params *dpll_params;
+
+ dpll_params = ti_pipe3_get_dpll_params(phy);
+ if (!dpll_params)
+ return -EINVAL;
+
+ val = ti_pipe3_readl(phy->pll_ctrl_base, PLL_CONFIGURATION1);
+ val &= ~PLL_REGN_MASK;
+ val |= dpll_params->n << PLL_REGN_SHIFT;
+ ti_pipe3_writel(phy->pll_ctrl_base, PLL_CONFIGURATION1, val);
+
+ val = ti_pipe3_readl(phy->pll_ctrl_base, PLL_CONFIGURATION2);
+ val &= ~PLL_SELFREQDCO_MASK;
+ val |= dpll_params->freq << PLL_SELFREQDCO_SHIFT;
+ ti_pipe3_writel(phy->pll_ctrl_base, PLL_CONFIGURATION2, val);
+
+ val = ti_pipe3_readl(phy->pll_ctrl_base, PLL_CONFIGURATION1);
+ val &= ~PLL_REGM_MASK;
+ val |= dpll_params->m << PLL_REGM_SHIFT;
+ ti_pipe3_writel(phy->pll_ctrl_base, PLL_CONFIGURATION1, val);
+
+ val = ti_pipe3_readl(phy->pll_ctrl_base, PLL_CONFIGURATION4);
+ val &= ~PLL_REGM_F_MASK;
+ val |= dpll_params->mf << PLL_REGM_F_SHIFT;
+ ti_pipe3_writel(phy->pll_ctrl_base, PLL_CONFIGURATION4, val);
+
+ val = ti_pipe3_readl(phy->pll_ctrl_base, PLL_CONFIGURATION3);
+ val &= ~PLL_SD_MASK;
+ val |= dpll_params->sd << PLL_SD_SHIFT;
+ ti_pipe3_writel(phy->pll_ctrl_base, PLL_CONFIGURATION3, val);
+
+ ti_pipe3_writel(phy->pll_ctrl_base, PLL_GO, SET_PLL_GO);
+
+ return ti_pipe3_dpll_wait_lock(phy);
+}
+
+static void ti_pipe3_calibrate(struct ti_pipe3 *phy)
+{
+ u32 val;
+ struct pipe3_settings *s = &phy->settings;
+
+ val = ti_pipe3_readl(phy->phy_rx, PIPE3_PHY_RX_ANA_PROGRAMMABILITY);
+ val &= ~(INTERFACE_MASK | LOSD_MASK | MEM_PLLDIV);
+ val |= (s->ana_interface << INTERFACE_SHIFT | s->ana_losd << LOSD_SHIFT);
+ ti_pipe3_writel(phy->phy_rx, PIPE3_PHY_RX_ANA_PROGRAMMABILITY, val);
+
+ val = ti_pipe3_readl(phy->phy_rx, PIPE3_PHY_RX_DIGITAL_MODES);
+ val &= ~(MEM_HS_RATE_MASK | MEM_OVRD_HS_RATE | MEM_CDR_FASTLOCK |
+ MEM_CDR_LBW_MASK | MEM_CDR_STEPCNT_MASK | MEM_CDR_STL_MASK |
+ MEM_CDR_THR_MASK | MEM_CDR_THR_MODE | MEM_CDR_2NDO_SDM_MODE);
+ val |= s->dig_hs_rate << MEM_HS_RATE_SHIFT |
+ s->dig_ovrd_hs_rate << MEM_OVRD_HS_RATE_SHIFT |
+ s->dig_fastlock << MEM_CDR_FASTLOCK_SHIFT |
+ s->dig_lbw << MEM_CDR_LBW_SHIFT |
+ s->dig_stepcnt << MEM_CDR_STEPCNT_SHIFT |
+ s->dig_stl << MEM_CDR_STL_SHIFT |
+ s->dig_thr << MEM_CDR_THR_SHIFT |
+ s->dig_thr_mode << MEM_CDR_THR_MODE_SHIFT |
+ s->dig_2ndo_sdm_mode << MEM_CDR_2NDO_SDM_MODE_SHIFT;
+ ti_pipe3_writel(phy->phy_rx, PIPE3_PHY_RX_DIGITAL_MODES, val);
+
+ val = ti_pipe3_readl(phy->phy_rx, PIPE3_PHY_RX_TRIM);
+ val &= ~MEM_DLL_TRIM_SEL_MASK;
+ val |= s->dll_trim_sel << MEM_DLL_TRIM_SHIFT;
+ ti_pipe3_writel(phy->phy_rx, PIPE3_PHY_RX_TRIM, val);
+
+ val = ti_pipe3_readl(phy->phy_rx, PIPE3_PHY_RX_DLL);
+ val &= ~MEM_DLL_PHINT_RATE_MASK;
+ val |= s->dll_phint_rate << MEM_DLL_PHINT_RATE_SHIFT;
+ ti_pipe3_writel(phy->phy_rx, PIPE3_PHY_RX_DLL, val);
+
+ val = ti_pipe3_readl(phy->phy_rx, PIPE3_PHY_RX_EQUALIZER);
+ val &= ~(MEM_EQLEV_MASK | MEM_EQFTC_MASK | MEM_EQCTL_MASK |
+ MEM_OVRD_EQLEV | MEM_OVRD_EQFTC);
+ val |= s->eq_lev << MEM_EQLEV_SHIFT |
+ s->eq_ftc << MEM_EQFTC_SHIFT |
+ s->eq_ctl << MEM_EQCTL_SHIFT |
+ s->eq_ovrd_lev << MEM_OVRD_EQLEV_SHIFT |
+ s->eq_ovrd_ftc << MEM_OVRD_EQFTC_SHIFT;
+ ti_pipe3_writel(phy->phy_rx, PIPE3_PHY_RX_EQUALIZER, val);
+
+ if (phy->mode == PIPE3_MODE_SATA) {
+ val = ti_pipe3_readl(phy->phy_rx,
+ SATA_PHY_RX_IO_AND_A2D_OVERRIDES);
+ val &= ~MEM_CDR_LOS_SOURCE_MASK;
+ ti_pipe3_writel(phy->phy_rx, SATA_PHY_RX_IO_AND_A2D_OVERRIDES,
+ val);
+ }
+}
+
+static int ti_pipe3_init(struct phy *x)
+{
+ struct ti_pipe3 *phy = phy_get_drvdata(x);
+ u32 val;
+ int ret = 0;
+
+ ti_pipe3_enable_clocks(phy);
+ /*
+ * Set pcie_pcs register to 0x96 for proper functioning of phy
+ * as recommended in AM572x TRM SPRUHZ6, section 18.5.2.2, table
+ * 18-1804.
+ */
+ if (phy->mode == PIPE3_MODE_PCIE) {
+ if (!phy->pcs_syscon) {
+ omap_control_pcie_pcs(phy->control_dev, 0x96);
+ return 0;
+ }
+
+ val = 0x96 << OMAP_CTRL_PCIE_PCS_DELAY_COUNT_SHIFT;
+ ret = regmap_update_bits(phy->pcs_syscon, phy->pcie_pcs_reg,
+ PCIE_PCS_MASK, val);
+ return ret;
+ }
+
+ /* Bring it out of IDLE if it is IDLE */
+ val = ti_pipe3_readl(phy->pll_ctrl_base, PLL_CONFIGURATION2);
+ if (val & PLL_IDLE) {
+ val &= ~PLL_IDLE;
+ ti_pipe3_writel(phy->pll_ctrl_base, PLL_CONFIGURATION2, val);
+ ret = ti_pipe3_dpll_wait_lock(phy);
+ }
+
+ /* SATA has issues if re-programmed when locked */
+ val = ti_pipe3_readl(phy->pll_ctrl_base, PLL_STATUS);
+ if ((val & PLL_LOCK) && phy->mode == PIPE3_MODE_SATA)
+ return ret;
+
+ /* Program the DPLL */
+ ret = ti_pipe3_dpll_program(phy);
+ if (ret) {
+ ti_pipe3_disable_clocks(phy);
+ return -EINVAL;
+ }
+
+ ti_pipe3_calibrate(phy);
+
+ return ret;
+}
+
+static int ti_pipe3_exit(struct phy *x)
+{
+ struct ti_pipe3 *phy = phy_get_drvdata(x);
+ u32 val;
+ unsigned long timeout;
+
+ /* If dpll_reset_syscon is not present we wont power down SATA DPLL
+ * due to Errata i783
+ */
+ if (phy->mode == PIPE3_MODE_SATA && !phy->dpll_reset_syscon)
+ return 0;
+
+ /* PCIe doesn't have internal DPLL */
+ if (phy->mode != PIPE3_MODE_PCIE) {
+ /* Put DPLL in IDLE mode */
+ val = ti_pipe3_readl(phy->pll_ctrl_base, PLL_CONFIGURATION2);
+ val |= PLL_IDLE;
+ ti_pipe3_writel(phy->pll_ctrl_base, PLL_CONFIGURATION2, val);
+
+ /* wait for LDO and Oscillator to power down */
+ timeout = jiffies + msecs_to_jiffies(PLL_IDLE_TIME);
+ do {
+ cpu_relax();
+ val = ti_pipe3_readl(phy->pll_ctrl_base, PLL_STATUS);
+ if ((val & PLL_TICOPWDN) && (val & PLL_LDOPWDN))
+ break;
+ } while (!time_after(jiffies, timeout));
+
+ if (!(val & PLL_TICOPWDN) || !(val & PLL_LDOPWDN)) {
+ dev_err(phy->dev, "Failed to power down: PLL_STATUS 0x%x\n",
+ val);
+ return -EBUSY;
+ }
+ }
+
+ /* i783: SATA needs control bit toggle after PLL unlock */
+ if (phy->mode == PIPE3_MODE_SATA) {
+ regmap_update_bits(phy->dpll_reset_syscon, phy->dpll_reset_reg,
+ SATA_PLL_SOFT_RESET, SATA_PLL_SOFT_RESET);
+ regmap_update_bits(phy->dpll_reset_syscon, phy->dpll_reset_reg,
+ SATA_PLL_SOFT_RESET, 0);
+ }
+
+ ti_pipe3_disable_clocks(phy);
+
+ return 0;
+}
+static const struct phy_ops ops = {
+ .init = ti_pipe3_init,
+ .exit = ti_pipe3_exit,
+ .power_on = ti_pipe3_power_on,
+ .power_off = ti_pipe3_power_off,
+ .owner = THIS_MODULE,
+};
+
+static const struct of_device_id ti_pipe3_id_table[];
+
+static int ti_pipe3_get_clk(struct ti_pipe3 *phy)
+{
+ struct clk *clk;
+ struct device *dev = phy->dev;
+
+ phy->refclk = devm_clk_get(dev, "refclk");
+ if (IS_ERR(phy->refclk)) {
+ dev_err(dev, "unable to get refclk\n");
+ /* older DTBs have missing refclk in SATA PHY
+ * so don't bail out in case of SATA PHY.
+ */
+ if (phy->mode != PIPE3_MODE_SATA)
+ return PTR_ERR(phy->refclk);
+ }
+
+ if (phy->mode != PIPE3_MODE_SATA) {
+ phy->wkupclk = devm_clk_get(dev, "wkupclk");
+ if (IS_ERR(phy->wkupclk)) {
+ dev_err(dev, "unable to get wkupclk\n");
+ return PTR_ERR(phy->wkupclk);
+ }
+ } else {
+ phy->wkupclk = ERR_PTR(-ENODEV);
+ }
+
+ if (phy->mode != PIPE3_MODE_PCIE || phy->phy_power_syscon) {
+ phy->sys_clk = devm_clk_get(dev, "sysclk");
+ if (IS_ERR(phy->sys_clk)) {
+ dev_err(dev, "unable to get sysclk\n");
+ return -EINVAL;
+ }
+ }
+
+ if (phy->mode == PIPE3_MODE_PCIE) {
+ clk = devm_clk_get(dev, "dpll_ref");
+ if (IS_ERR(clk)) {
+ dev_err(dev, "unable to get dpll ref clk\n");
+ return PTR_ERR(clk);
+ }
+ clk_set_rate(clk, 1500000000);
+
+ clk = devm_clk_get(dev, "dpll_ref_m2");
+ if (IS_ERR(clk)) {
+ dev_err(dev, "unable to get dpll ref m2 clk\n");
+ return PTR_ERR(clk);
+ }
+ clk_set_rate(clk, 100000000);
+
+ clk = devm_clk_get(dev, "phy-div");
+ if (IS_ERR(clk)) {
+ dev_err(dev, "unable to get phy-div clk\n");
+ return PTR_ERR(clk);
+ }
+ clk_set_rate(clk, 100000000);
+
+ phy->div_clk = devm_clk_get(dev, "div-clk");
+ if (IS_ERR(phy->div_clk)) {
+ dev_err(dev, "unable to get div-clk\n");
+ return PTR_ERR(phy->div_clk);
+ }
+ } else {
+ phy->div_clk = ERR_PTR(-ENODEV);
+ }
+
+ return 0;
+}
+
+static int ti_pipe3_get_sysctrl(struct ti_pipe3 *phy)
+{
+ struct device *dev = phy->dev;
+ struct device_node *node = dev->of_node;
+ struct device_node *control_node;
+ struct platform_device *control_pdev;
+
+ phy->phy_power_syscon = syscon_regmap_lookup_by_phandle(node,
+ "syscon-phy-power");
+ if (IS_ERR(phy->phy_power_syscon)) {
+ dev_dbg(dev,
+ "can't get syscon-phy-power, using control device\n");
+ phy->phy_power_syscon = NULL;
+ } else {
+ if (of_property_read_u32_index(node,
+ "syscon-phy-power", 1,
+ &phy->power_reg)) {
+ dev_err(dev, "couldn't get power reg. offset\n");
+ return -EINVAL;
+ }
+ }
+
+ if (!phy->phy_power_syscon) {
+ control_node = of_parse_phandle(node, "ctrl-module", 0);
+ if (!control_node) {
+ dev_err(dev, "Failed to get control device phandle\n");
+ return -EINVAL;
+ }
+
+ control_pdev = of_find_device_by_node(control_node);
+ if (!control_pdev) {
+ dev_err(dev, "Failed to get control device\n");
+ return -EINVAL;
+ }
+
+ phy->control_dev = &control_pdev->dev;
+ }
+
+ if (phy->mode == PIPE3_MODE_PCIE) {
+ phy->pcs_syscon = syscon_regmap_lookup_by_phandle(node,
+ "syscon-pcs");
+ if (IS_ERR(phy->pcs_syscon)) {
+ dev_dbg(dev,
+ "can't get syscon-pcs, using omap control\n");
+ phy->pcs_syscon = NULL;
+ } else {
+ if (of_property_read_u32_index(node,
+ "syscon-pcs", 1,
+ &phy->pcie_pcs_reg)) {
+ dev_err(dev,
+ "couldn't get pcie pcs reg. offset\n");
+ return -EINVAL;
+ }
+ }
+ }
+
+ if (phy->mode == PIPE3_MODE_SATA) {
+ phy->dpll_reset_syscon = syscon_regmap_lookup_by_phandle(node,
+ "syscon-pllreset");
+ if (IS_ERR(phy->dpll_reset_syscon)) {
+ dev_info(dev,
+ "can't get syscon-pllreset, sata dpll won't idle\n");
+ phy->dpll_reset_syscon = NULL;
+ } else {
+ if (of_property_read_u32_index(node,
+ "syscon-pllreset", 1,
+ &phy->dpll_reset_reg)) {
+ dev_err(dev,
+ "couldn't get pllreset reg. offset\n");
+ return -EINVAL;
+ }
+ }
+ }
+
+ return 0;
+}
+
+static int ti_pipe3_get_tx_rx_base(struct ti_pipe3 *phy)
+{
+ struct resource *res;
+ struct device *dev = phy->dev;
+ struct platform_device *pdev = to_platform_device(dev);
+
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
+ "phy_rx");
+ phy->phy_rx = devm_ioremap_resource(dev, res);
+ if (IS_ERR(phy->phy_rx))
+ return PTR_ERR(phy->phy_rx);
+
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
+ "phy_tx");
+ phy->phy_tx = devm_ioremap_resource(dev, res);
+
+ return PTR_ERR_OR_ZERO(phy->phy_tx);
+}
+
+static int ti_pipe3_get_pll_base(struct ti_pipe3 *phy)
+{
+ struct resource *res;
+ struct device *dev = phy->dev;
+ struct platform_device *pdev = to_platform_device(dev);
+
+ if (phy->mode == PIPE3_MODE_PCIE)
+ return 0;
+
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
+ "pll_ctrl");
+ phy->pll_ctrl_base = devm_ioremap_resource(dev, res);
+ return PTR_ERR_OR_ZERO(phy->pll_ctrl_base);
+}
+
+static int ti_pipe3_probe(struct platform_device *pdev)
+{
+ struct ti_pipe3 *phy;
+ struct phy *generic_phy;
+ struct phy_provider *phy_provider;
+ struct device *dev = &pdev->dev;
+ int ret;
+ const struct of_device_id *match;
+ struct pipe3_data *data;
+
+ phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL);
+ if (!phy)
+ return -ENOMEM;
+
+ match = of_match_device(ti_pipe3_id_table, dev);
+ if (!match)
+ return -EINVAL;
+
+ data = (struct pipe3_data *)match->data;
+ if (!data) {
+ dev_err(dev, "no driver data\n");
+ return -EINVAL;
+ }
+
+ phy->dev = dev;
+ phy->mode = data->mode;
+ phy->dpll_map = data->dpll_map;
+ phy->settings = data->settings;
+
+ ret = ti_pipe3_get_pll_base(phy);
+ if (ret)
+ return ret;
+
+ ret = ti_pipe3_get_tx_rx_base(phy);
+ if (ret)
+ return ret;
+
+ ret = ti_pipe3_get_sysctrl(phy);
+ if (ret)
+ return ret;
+
+ ret = ti_pipe3_get_clk(phy);
+ if (ret)
+ return ret;
+
+ platform_set_drvdata(pdev, phy);
+ pm_runtime_enable(dev);
+
+ /*
+ * Prevent auto-disable of refclk for SATA PHY due to Errata i783
+ */
+ if (phy->mode == PIPE3_MODE_SATA) {
+ if (!IS_ERR(phy->refclk)) {
+ clk_prepare_enable(phy->refclk);
+ phy->sata_refclk_enabled = true;
+ }
+ }
+
+ generic_phy = devm_phy_create(dev, NULL, &ops);
+ if (IS_ERR(generic_phy))
+ return PTR_ERR(generic_phy);
+
+ phy_set_drvdata(generic_phy, phy);
+
+ ti_pipe3_power_off(generic_phy);
+
+ phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
+ return PTR_ERR_OR_ZERO(phy_provider);
+}
+
+static int ti_pipe3_remove(struct platform_device *pdev)
+{
+ struct ti_pipe3 *phy = platform_get_drvdata(pdev);
+
+ if (phy->mode == PIPE3_MODE_SATA) {
+ clk_disable_unprepare(phy->refclk);
+ phy->sata_refclk_enabled = false;
+ }
+ pm_runtime_disable(&pdev->dev);
+
+ return 0;
+}
+
+static int ti_pipe3_enable_clocks(struct ti_pipe3 *phy)
+{
+ int ret = 0;
+
+ if (!IS_ERR(phy->refclk)) {
+ ret = clk_prepare_enable(phy->refclk);
+ if (ret) {
+ dev_err(phy->dev, "Failed to enable refclk %d\n", ret);
+ return ret;
+ }
+ }
+
+ if (!IS_ERR(phy->wkupclk)) {
+ ret = clk_prepare_enable(phy->wkupclk);
+ if (ret) {
+ dev_err(phy->dev, "Failed to enable wkupclk %d\n", ret);
+ goto disable_refclk;
+ }
+ }
+
+ if (!IS_ERR(phy->div_clk)) {
+ ret = clk_prepare_enable(phy->div_clk);
+ if (ret) {
+ dev_err(phy->dev, "Failed to enable div_clk %d\n", ret);
+ goto disable_wkupclk;
+ }
+ }
+
+ return 0;
+
+disable_wkupclk:
+ if (!IS_ERR(phy->wkupclk))
+ clk_disable_unprepare(phy->wkupclk);
+
+disable_refclk:
+ if (!IS_ERR(phy->refclk))
+ clk_disable_unprepare(phy->refclk);
+
+ return ret;
+}
+
+static void ti_pipe3_disable_clocks(struct ti_pipe3 *phy)
+{
+ if (!IS_ERR(phy->wkupclk))
+ clk_disable_unprepare(phy->wkupclk);
+ if (!IS_ERR(phy->refclk))
+ clk_disable_unprepare(phy->refclk);
+ if (!IS_ERR(phy->div_clk))
+ clk_disable_unprepare(phy->div_clk);
+}
+
+static const struct of_device_id ti_pipe3_id_table[] = {
+ {
+ .compatible = "ti,phy-usb3",
+ .data = &data_usb,
+ },
+ {
+ .compatible = "ti,omap-usb3",
+ .data = &data_usb,
+ },
+ {
+ .compatible = "ti,phy-pipe3-sata",
+ .data = &data_sata,
+ },
+ {
+ .compatible = "ti,phy-pipe3-pcie",
+ .data = &data_pcie,
+ },
+ {}
+};
+MODULE_DEVICE_TABLE(of, ti_pipe3_id_table);
+
+static struct platform_driver ti_pipe3_driver = {
+ .probe = ti_pipe3_probe,
+ .remove = ti_pipe3_remove,
+ .driver = {
+ .name = "ti-pipe3",
+ .of_match_table = ti_pipe3_id_table,
+ },
+};
+
+module_platform_driver(ti_pipe3_driver);
+
+MODULE_ALIAS("platform:ti_pipe3");
+MODULE_AUTHOR("Texas Instruments Inc.");
+MODULE_DESCRIPTION("TI PIPE3 phy driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/phy/ti/phy-tusb1210.c b/drivers/phy/ti/phy-tusb1210.c
new file mode 100644
index 000000000..d8d0cc11d
--- /dev/null
+++ b/drivers/phy/ti/phy-tusb1210.c
@@ -0,0 +1,179 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/**
+ * tusb1210.c - TUSB1210 USB ULPI PHY driver
+ *
+ * Copyright (C) 2015 Intel Corporation
+ *
+ * Author: Heikki Krogerus <heikki.krogerus@linux.intel.com>
+ */
+#include <linux/module.h>
+#include <linux/ulpi/driver.h>
+#include <linux/ulpi/regs.h>
+#include <linux/gpio/consumer.h>
+#include <linux/phy/ulpi_phy.h>
+
+#define TUSB1210_VENDOR_SPECIFIC2 0x80
+#define TUSB1210_VENDOR_SPECIFIC2_IHSTX_SHIFT 0
+#define TUSB1210_VENDOR_SPECIFIC2_ZHSDRV_SHIFT 4
+#define TUSB1210_VENDOR_SPECIFIC2_DP_SHIFT 6
+
+struct tusb1210 {
+ struct ulpi *ulpi;
+ struct phy *phy;
+ struct gpio_desc *gpio_reset;
+ struct gpio_desc *gpio_cs;
+ u8 vendor_specific2;
+};
+
+static int tusb1210_power_on(struct phy *phy)
+{
+ struct tusb1210 *tusb = phy_get_drvdata(phy);
+
+ gpiod_set_value_cansleep(tusb->gpio_reset, 1);
+ gpiod_set_value_cansleep(tusb->gpio_cs, 1);
+
+ /* Restore the optional eye diagram optimization value */
+ if (tusb->vendor_specific2)
+ ulpi_write(tusb->ulpi, TUSB1210_VENDOR_SPECIFIC2,
+ tusb->vendor_specific2);
+
+ return 0;
+}
+
+static int tusb1210_power_off(struct phy *phy)
+{
+ struct tusb1210 *tusb = phy_get_drvdata(phy);
+
+ gpiod_set_value_cansleep(tusb->gpio_reset, 0);
+ gpiod_set_value_cansleep(tusb->gpio_cs, 0);
+
+ return 0;
+}
+
+static int tusb1210_set_mode(struct phy *phy, enum phy_mode mode, int submode)
+{
+ struct tusb1210 *tusb = phy_get_drvdata(phy);
+ int ret;
+
+ ret = ulpi_read(tusb->ulpi, ULPI_OTG_CTRL);
+ if (ret < 0)
+ return ret;
+
+ switch (mode) {
+ case PHY_MODE_USB_HOST:
+ ret |= (ULPI_OTG_CTRL_DRVVBUS_EXT
+ | ULPI_OTG_CTRL_ID_PULLUP
+ | ULPI_OTG_CTRL_DP_PULLDOWN
+ | ULPI_OTG_CTRL_DM_PULLDOWN);
+ ulpi_write(tusb->ulpi, ULPI_OTG_CTRL, ret);
+ ret |= ULPI_OTG_CTRL_DRVVBUS;
+ break;
+ case PHY_MODE_USB_DEVICE:
+ ret &= ~(ULPI_OTG_CTRL_DRVVBUS
+ | ULPI_OTG_CTRL_DP_PULLDOWN
+ | ULPI_OTG_CTRL_DM_PULLDOWN);
+ ulpi_write(tusb->ulpi, ULPI_OTG_CTRL, ret);
+ ret &= ~ULPI_OTG_CTRL_DRVVBUS_EXT;
+ break;
+ default:
+ /* nothing */
+ return 0;
+ }
+
+ return ulpi_write(tusb->ulpi, ULPI_OTG_CTRL, ret);
+}
+
+static const struct phy_ops phy_ops = {
+ .power_on = tusb1210_power_on,
+ .power_off = tusb1210_power_off,
+ .set_mode = tusb1210_set_mode,
+ .owner = THIS_MODULE,
+};
+
+static int tusb1210_probe(struct ulpi *ulpi)
+{
+ struct tusb1210 *tusb;
+ u8 val, reg;
+
+ tusb = devm_kzalloc(&ulpi->dev, sizeof(*tusb), GFP_KERNEL);
+ if (!tusb)
+ return -ENOMEM;
+
+ tusb->gpio_reset = devm_gpiod_get_optional(&ulpi->dev, "reset",
+ GPIOD_OUT_LOW);
+ if (IS_ERR(tusb->gpio_reset))
+ return PTR_ERR(tusb->gpio_reset);
+
+ gpiod_set_value_cansleep(tusb->gpio_reset, 1);
+
+ tusb->gpio_cs = devm_gpiod_get_optional(&ulpi->dev, "cs",
+ GPIOD_OUT_LOW);
+ if (IS_ERR(tusb->gpio_cs))
+ return PTR_ERR(tusb->gpio_cs);
+
+ gpiod_set_value_cansleep(tusb->gpio_cs, 1);
+
+ /*
+ * VENDOR_SPECIFIC2 register in TUSB1210 can be used for configuring eye
+ * diagram optimization and DP/DM swap.
+ */
+
+ /* High speed output drive strength configuration */
+ device_property_read_u8(&ulpi->dev, "ihstx", &val);
+ reg = val << TUSB1210_VENDOR_SPECIFIC2_IHSTX_SHIFT;
+
+ /* High speed output impedance configuration */
+ device_property_read_u8(&ulpi->dev, "zhsdrv", &val);
+ reg |= val << TUSB1210_VENDOR_SPECIFIC2_ZHSDRV_SHIFT;
+
+ /* DP/DM swap control */
+ device_property_read_u8(&ulpi->dev, "datapolarity", &val);
+ reg |= val << TUSB1210_VENDOR_SPECIFIC2_DP_SHIFT;
+
+ if (reg) {
+ ulpi_write(ulpi, TUSB1210_VENDOR_SPECIFIC2, reg);
+ tusb->vendor_specific2 = reg;
+ }
+
+ tusb->phy = ulpi_phy_create(ulpi, &phy_ops);
+ if (IS_ERR(tusb->phy))
+ return PTR_ERR(tusb->phy);
+
+ tusb->ulpi = ulpi;
+
+ phy_set_drvdata(tusb->phy, tusb);
+ ulpi_set_drvdata(ulpi, tusb);
+ return 0;
+}
+
+static void tusb1210_remove(struct ulpi *ulpi)
+{
+ struct tusb1210 *tusb = ulpi_get_drvdata(ulpi);
+
+ ulpi_phy_destroy(ulpi, tusb->phy);
+}
+
+#define TI_VENDOR_ID 0x0451
+
+static const struct ulpi_device_id tusb1210_ulpi_id[] = {
+ { TI_VENDOR_ID, 0x1507, }, /* TUSB1210 */
+ { TI_VENDOR_ID, 0x1508, }, /* TUSB1211 */
+ { },
+};
+MODULE_DEVICE_TABLE(ulpi, tusb1210_ulpi_id);
+
+static struct ulpi_driver tusb1210_driver = {
+ .id_table = tusb1210_ulpi_id,
+ .probe = tusb1210_probe,
+ .remove = tusb1210_remove,
+ .driver = {
+ .name = "tusb1210",
+ .owner = THIS_MODULE,
+ },
+};
+
+module_ulpi_driver(tusb1210_driver);
+
+MODULE_AUTHOR("Intel Corporation");
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("TUSB1210 ULPI PHY driver");
diff --git a/drivers/phy/ti/phy-twl4030-usb.c b/drivers/phy/ti/phy-twl4030-usb.c
new file mode 100644
index 000000000..812e5409d
--- /dev/null
+++ b/drivers/phy/ti/phy-twl4030-usb.c
@@ -0,0 +1,846 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * twl4030_usb - TWL4030 USB transceiver, talking to OMAP OTG controller
+ *
+ * Copyright (C) 2004-2007 Texas Instruments
+ * Copyright (C) 2008 Nokia Corporation
+ * Contact: Felipe Balbi <felipe.balbi@nokia.com>
+ *
+ * Current status:
+ * - HS USB ULPI mode works.
+ * - 3-pin mode support may be added in future.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/workqueue.h>
+#include <linux/io.h>
+#include <linux/delay.h>
+#include <linux/usb/otg.h>
+#include <linux/phy/phy.h>
+#include <linux/pm_runtime.h>
+#include <linux/usb/musb.h>
+#include <linux/usb/ulpi.h>
+#include <linux/mfd/twl.h>
+#include <linux/regulator/consumer.h>
+#include <linux/err.h>
+#include <linux/slab.h>
+
+/* Register defines */
+
+#define MCPC_CTRL 0x30
+#define MCPC_CTRL_RTSOL (1 << 7)
+#define MCPC_CTRL_EXTSWR (1 << 6)
+#define MCPC_CTRL_EXTSWC (1 << 5)
+#define MCPC_CTRL_VOICESW (1 << 4)
+#define MCPC_CTRL_OUT64K (1 << 3)
+#define MCPC_CTRL_RTSCTSSW (1 << 2)
+#define MCPC_CTRL_HS_UART (1 << 0)
+
+#define MCPC_IO_CTRL 0x33
+#define MCPC_IO_CTRL_MICBIASEN (1 << 5)
+#define MCPC_IO_CTRL_CTS_NPU (1 << 4)
+#define MCPC_IO_CTRL_RXD_PU (1 << 3)
+#define MCPC_IO_CTRL_TXDTYP (1 << 2)
+#define MCPC_IO_CTRL_CTSTYP (1 << 1)
+#define MCPC_IO_CTRL_RTSTYP (1 << 0)
+
+#define MCPC_CTRL2 0x36
+#define MCPC_CTRL2_MCPC_CK_EN (1 << 0)
+
+#define OTHER_FUNC_CTRL 0x80
+#define OTHER_FUNC_CTRL_BDIS_ACON_EN (1 << 4)
+#define OTHER_FUNC_CTRL_FIVEWIRE_MODE (1 << 2)
+
+#define OTHER_IFC_CTRL 0x83
+#define OTHER_IFC_CTRL_OE_INT_EN (1 << 6)
+#define OTHER_IFC_CTRL_CEA2011_MODE (1 << 5)
+#define OTHER_IFC_CTRL_FSLSSERIALMODE_4PIN (1 << 4)
+#define OTHER_IFC_CTRL_HIZ_ULPI_60MHZ_OUT (1 << 3)
+#define OTHER_IFC_CTRL_HIZ_ULPI (1 << 2)
+#define OTHER_IFC_CTRL_ALT_INT_REROUTE (1 << 0)
+
+#define OTHER_INT_EN_RISE 0x86
+#define OTHER_INT_EN_FALL 0x89
+#define OTHER_INT_STS 0x8C
+#define OTHER_INT_LATCH 0x8D
+#define OTHER_INT_VB_SESS_VLD (1 << 7)
+#define OTHER_INT_DM_HI (1 << 6) /* not valid for "latch" reg */
+#define OTHER_INT_DP_HI (1 << 5) /* not valid for "latch" reg */
+#define OTHER_INT_BDIS_ACON (1 << 3) /* not valid for "fall" regs */
+#define OTHER_INT_MANU (1 << 1)
+#define OTHER_INT_ABNORMAL_STRESS (1 << 0)
+
+#define ID_STATUS 0x96
+#define ID_RES_FLOAT (1 << 4)
+#define ID_RES_440K (1 << 3)
+#define ID_RES_200K (1 << 2)
+#define ID_RES_102K (1 << 1)
+#define ID_RES_GND (1 << 0)
+
+#define POWER_CTRL 0xAC
+#define POWER_CTRL_OTG_ENAB (1 << 5)
+
+#define OTHER_IFC_CTRL2 0xAF
+#define OTHER_IFC_CTRL2_ULPI_STP_LOW (1 << 4)
+#define OTHER_IFC_CTRL2_ULPI_TXEN_POL (1 << 3)
+#define OTHER_IFC_CTRL2_ULPI_4PIN_2430 (1 << 2)
+#define OTHER_IFC_CTRL2_USB_INT_OUTSEL_MASK (3 << 0) /* bits 0 and 1 */
+#define OTHER_IFC_CTRL2_USB_INT_OUTSEL_INT1N (0 << 0)
+#define OTHER_IFC_CTRL2_USB_INT_OUTSEL_INT2N (1 << 0)
+
+#define REG_CTRL_EN 0xB2
+#define REG_CTRL_ERROR 0xB5
+#define ULPI_I2C_CONFLICT_INTEN (1 << 0)
+
+#define OTHER_FUNC_CTRL2 0xB8
+#define OTHER_FUNC_CTRL2_VBAT_TIMER_EN (1 << 0)
+
+/* following registers do not have separate _clr and _set registers */
+#define VBUS_DEBOUNCE 0xC0
+#define ID_DEBOUNCE 0xC1
+#define VBAT_TIMER 0xD3
+#define PHY_PWR_CTRL 0xFD
+#define PHY_PWR_PHYPWD (1 << 0)
+#define PHY_CLK_CTRL 0xFE
+#define PHY_CLK_CTRL_CLOCKGATING_EN (1 << 2)
+#define PHY_CLK_CTRL_CLK32K_EN (1 << 1)
+#define REQ_PHY_DPLL_CLK (1 << 0)
+#define PHY_CLK_CTRL_STS 0xFF
+#define PHY_DPLL_CLK (1 << 0)
+
+/* In module TWL_MODULE_PM_MASTER */
+#define STS_HW_CONDITIONS 0x0F
+
+/* In module TWL_MODULE_PM_RECEIVER */
+#define VUSB_DEDICATED1 0x7D
+#define VUSB_DEDICATED2 0x7E
+#define VUSB1V5_DEV_GRP 0x71
+#define VUSB1V5_TYPE 0x72
+#define VUSB1V5_REMAP 0x73
+#define VUSB1V8_DEV_GRP 0x74
+#define VUSB1V8_TYPE 0x75
+#define VUSB1V8_REMAP 0x76
+#define VUSB3V1_DEV_GRP 0x77
+#define VUSB3V1_TYPE 0x78
+#define VUSB3V1_REMAP 0x79
+
+/* In module TWL4030_MODULE_INTBR */
+#define PMBR1 0x0D
+#define GPIO_USB_4PIN_ULPI_2430C (3 << 0)
+
+static irqreturn_t twl4030_usb_irq(int irq, void *_twl);
+/*
+ * If VBUS is valid or ID is ground, then we know a
+ * cable is present and we need to be runtime-enabled
+ */
+static inline bool cable_present(enum musb_vbus_id_status stat)
+{
+ return stat == MUSB_VBUS_VALID ||
+ stat == MUSB_ID_GROUND;
+}
+
+struct twl4030_usb {
+ struct usb_phy phy;
+ struct device *dev;
+
+ /* TWL4030 internal USB regulator supplies */
+ struct regulator *usb1v5;
+ struct regulator *usb1v8;
+ struct regulator *usb3v1;
+
+ /* for vbus reporting with irqs disabled */
+ struct mutex lock;
+
+ /* pin configuration */
+ enum twl4030_usb_mode usb_mode;
+
+ int irq;
+ enum musb_vbus_id_status linkstat;
+ atomic_t connected;
+ bool vbus_supplied;
+ bool musb_mailbox_pending;
+
+ struct delayed_work id_workaround_work;
+};
+
+/* internal define on top of container_of */
+#define phy_to_twl(x) container_of((x), struct twl4030_usb, phy)
+
+/*-------------------------------------------------------------------------*/
+
+static int twl4030_i2c_write_u8_verify(struct twl4030_usb *twl,
+ u8 module, u8 data, u8 address)
+{
+ u8 check = 0xFF;
+
+ if ((twl_i2c_write_u8(module, data, address) >= 0) &&
+ (twl_i2c_read_u8(module, &check, address) >= 0) &&
+ (check == data))
+ return 0;
+ dev_dbg(twl->dev, "Write%d[%d,0x%x] wrote %02x but read %02x\n",
+ 1, module, address, check, data);
+
+ /* Failed once: Try again */
+ if ((twl_i2c_write_u8(module, data, address) >= 0) &&
+ (twl_i2c_read_u8(module, &check, address) >= 0) &&
+ (check == data))
+ return 0;
+ dev_dbg(twl->dev, "Write%d[%d,0x%x] wrote %02x but read %02x\n",
+ 2, module, address, check, data);
+
+ /* Failed again: Return error */
+ return -EBUSY;
+}
+
+#define twl4030_usb_write_verify(twl, address, data) \
+ twl4030_i2c_write_u8_verify(twl, TWL_MODULE_USB, (data), (address))
+
+static inline int twl4030_usb_write(struct twl4030_usb *twl,
+ u8 address, u8 data)
+{
+ int ret = 0;
+
+ ret = twl_i2c_write_u8(TWL_MODULE_USB, data, address);
+ if (ret < 0)
+ dev_dbg(twl->dev,
+ "TWL4030:USB:Write[0x%x] Error %d\n", address, ret);
+ return ret;
+}
+
+static inline int twl4030_readb(struct twl4030_usb *twl, u8 module, u8 address)
+{
+ u8 data;
+ int ret = 0;
+
+ ret = twl_i2c_read_u8(module, &data, address);
+ if (ret >= 0)
+ ret = data;
+ else
+ dev_dbg(twl->dev,
+ "TWL4030:readb[0x%x,0x%x] Error %d\n",
+ module, address, ret);
+
+ return ret;
+}
+
+static inline int twl4030_usb_read(struct twl4030_usb *twl, u8 address)
+{
+ return twl4030_readb(twl, TWL_MODULE_USB, address);
+}
+
+/*-------------------------------------------------------------------------*/
+
+static inline int
+twl4030_usb_set_bits(struct twl4030_usb *twl, u8 reg, u8 bits)
+{
+ return twl4030_usb_write(twl, ULPI_SET(reg), bits);
+}
+
+static inline int
+twl4030_usb_clear_bits(struct twl4030_usb *twl, u8 reg, u8 bits)
+{
+ return twl4030_usb_write(twl, ULPI_CLR(reg), bits);
+}
+
+/*-------------------------------------------------------------------------*/
+
+static bool twl4030_is_driving_vbus(struct twl4030_usb *twl)
+{
+ int ret;
+
+ ret = twl4030_usb_read(twl, PHY_CLK_CTRL_STS);
+ if (ret < 0 || !(ret & PHY_DPLL_CLK))
+ /*
+ * if clocks are off, registers are not updated,
+ * but we can assume we don't drive VBUS in this case
+ */
+ return false;
+
+ ret = twl4030_usb_read(twl, ULPI_OTG_CTRL);
+ if (ret < 0)
+ return false;
+
+ return (ret & (ULPI_OTG_DRVVBUS | ULPI_OTG_CHRGVBUS)) ? true : false;
+}
+
+static enum musb_vbus_id_status
+ twl4030_usb_linkstat(struct twl4030_usb *twl)
+{
+ int status;
+ enum musb_vbus_id_status linkstat = MUSB_UNKNOWN;
+
+ twl->vbus_supplied = false;
+
+ /*
+ * For ID/VBUS sensing, see manual section 15.4.8 ...
+ * except when using only battery backup power, two
+ * comparators produce VBUS_PRES and ID_PRES signals,
+ * which don't match docs elsewhere. But ... BIT(7)
+ * and BIT(2) of STS_HW_CONDITIONS, respectively, do
+ * seem to match up. If either is true the USB_PRES
+ * signal is active, the OTG module is activated, and
+ * its interrupt may be raised (may wake the system).
+ */
+ status = twl4030_readb(twl, TWL_MODULE_PM_MASTER, STS_HW_CONDITIONS);
+ if (status < 0)
+ dev_err(twl->dev, "USB link status err %d\n", status);
+ else if (status & (BIT(7) | BIT(2))) {
+ if (status & BIT(7)) {
+ if (twl4030_is_driving_vbus(twl))
+ status &= ~BIT(7);
+ else
+ twl->vbus_supplied = true;
+ }
+
+ if (status & BIT(2))
+ linkstat = MUSB_ID_GROUND;
+ else if (status & BIT(7))
+ linkstat = MUSB_VBUS_VALID;
+ else
+ linkstat = MUSB_VBUS_OFF;
+ } else {
+ if (twl->linkstat != MUSB_UNKNOWN)
+ linkstat = MUSB_VBUS_OFF;
+ }
+
+ kobject_uevent(&twl->dev->kobj, linkstat == MUSB_VBUS_VALID
+ ? KOBJ_ONLINE : KOBJ_OFFLINE);
+
+ dev_dbg(twl->dev, "HW_CONDITIONS 0x%02x/%d; link %d\n",
+ status, status, linkstat);
+
+ /* REVISIT this assumes host and peripheral controllers
+ * are registered, and that both are active...
+ */
+
+ return linkstat;
+}
+
+static void twl4030_usb_set_mode(struct twl4030_usb *twl, int mode)
+{
+ twl->usb_mode = mode;
+
+ switch (mode) {
+ case T2_USB_MODE_ULPI:
+ twl4030_usb_clear_bits(twl, ULPI_IFC_CTRL,
+ ULPI_IFC_CTRL_CARKITMODE);
+ twl4030_usb_set_bits(twl, POWER_CTRL, POWER_CTRL_OTG_ENAB);
+ twl4030_usb_clear_bits(twl, ULPI_FUNC_CTRL,
+ ULPI_FUNC_CTRL_XCVRSEL_MASK |
+ ULPI_FUNC_CTRL_OPMODE_MASK);
+ break;
+ case -1:
+ /* FIXME: power on defaults */
+ break;
+ default:
+ dev_err(twl->dev, "unsupported T2 transceiver mode %d\n",
+ mode);
+ break;
+ }
+}
+
+static void twl4030_i2c_access(struct twl4030_usb *twl, int on)
+{
+ unsigned long timeout;
+ int val = twl4030_usb_read(twl, PHY_CLK_CTRL);
+
+ if (val >= 0) {
+ if (on) {
+ /* enable DPLL to access PHY registers over I2C */
+ val |= REQ_PHY_DPLL_CLK;
+ WARN_ON(twl4030_usb_write_verify(twl, PHY_CLK_CTRL,
+ (u8)val) < 0);
+
+ timeout = jiffies + HZ;
+ while (!(twl4030_usb_read(twl, PHY_CLK_CTRL_STS) &
+ PHY_DPLL_CLK)
+ && time_before(jiffies, timeout))
+ udelay(10);
+ if (!(twl4030_usb_read(twl, PHY_CLK_CTRL_STS) &
+ PHY_DPLL_CLK))
+ dev_err(twl->dev, "Timeout setting T2 HSUSB "
+ "PHY DPLL clock\n");
+ } else {
+ /* let ULPI control the DPLL clock */
+ val &= ~REQ_PHY_DPLL_CLK;
+ WARN_ON(twl4030_usb_write_verify(twl, PHY_CLK_CTRL,
+ (u8)val) < 0);
+ }
+ }
+}
+
+static void __twl4030_phy_power(struct twl4030_usb *twl, int on)
+{
+ u8 pwr = twl4030_usb_read(twl, PHY_PWR_CTRL);
+
+ if (on)
+ pwr &= ~PHY_PWR_PHYPWD;
+ else
+ pwr |= PHY_PWR_PHYPWD;
+
+ WARN_ON(twl4030_usb_write_verify(twl, PHY_PWR_CTRL, pwr) < 0);
+}
+
+static int __maybe_unused twl4030_usb_suspend(struct device *dev)
+{
+ struct twl4030_usb *twl = dev_get_drvdata(dev);
+
+ /*
+ * we need enabled runtime on resume,
+ * so turn irq off here, so we do not get it early
+ * note: wakeup on usb plug works independently of this
+ */
+ dev_dbg(twl->dev, "%s\n", __func__);
+ disable_irq(twl->irq);
+
+ return 0;
+}
+
+static int __maybe_unused twl4030_usb_resume(struct device *dev)
+{
+ struct twl4030_usb *twl = dev_get_drvdata(dev);
+
+ dev_dbg(twl->dev, "%s\n", __func__);
+ enable_irq(twl->irq);
+ /* check whether cable status changed */
+ twl4030_usb_irq(0, twl);
+
+ return 0;
+}
+
+static int __maybe_unused twl4030_usb_runtime_suspend(struct device *dev)
+{
+ struct twl4030_usb *twl = dev_get_drvdata(dev);
+
+ dev_dbg(twl->dev, "%s\n", __func__);
+
+ __twl4030_phy_power(twl, 0);
+ regulator_disable(twl->usb1v5);
+ regulator_disable(twl->usb1v8);
+ regulator_disable(twl->usb3v1);
+
+ return 0;
+}
+
+static int __maybe_unused twl4030_usb_runtime_resume(struct device *dev)
+{
+ struct twl4030_usb *twl = dev_get_drvdata(dev);
+ int res;
+
+ dev_dbg(twl->dev, "%s\n", __func__);
+
+ res = regulator_enable(twl->usb3v1);
+ if (res)
+ dev_err(twl->dev, "Failed to enable usb3v1\n");
+
+ res = regulator_enable(twl->usb1v8);
+ if (res)
+ dev_err(twl->dev, "Failed to enable usb1v8\n");
+
+ /*
+ * Disabling usb3v1 regulator (= writing 0 to VUSB3V1_DEV_GRP
+ * in twl4030) resets the VUSB_DEDICATED2 register. This reset
+ * enables VUSB3V1_SLEEP bit that remaps usb3v1 ACTIVE state to
+ * SLEEP. We work around this by clearing the bit after usv3v1
+ * is re-activated. This ensures that VUSB3V1 is really active.
+ */
+ twl_i2c_write_u8(TWL_MODULE_PM_RECEIVER, 0, VUSB_DEDICATED2);
+
+ res = regulator_enable(twl->usb1v5);
+ if (res)
+ dev_err(twl->dev, "Failed to enable usb1v5\n");
+
+ __twl4030_phy_power(twl, 1);
+ twl4030_usb_write(twl, PHY_CLK_CTRL,
+ twl4030_usb_read(twl, PHY_CLK_CTRL) |
+ (PHY_CLK_CTRL_CLOCKGATING_EN |
+ PHY_CLK_CTRL_CLK32K_EN));
+
+ twl4030_i2c_access(twl, 1);
+ twl4030_usb_set_mode(twl, twl->usb_mode);
+ if (twl->usb_mode == T2_USB_MODE_ULPI)
+ twl4030_i2c_access(twl, 0);
+ /*
+ * According to the TPS65950 TRM, there has to be at least 50ms
+ * delay between setting POWER_CTRL_OTG_ENAB and enabling charging
+ * so wait here so that a fully enabled phy can be expected after
+ * resume
+ */
+ msleep(50);
+ return 0;
+}
+
+static int twl4030_phy_power_off(struct phy *phy)
+{
+ struct twl4030_usb *twl = phy_get_drvdata(phy);
+
+ dev_dbg(twl->dev, "%s\n", __func__);
+
+ return 0;
+}
+
+static int twl4030_phy_power_on(struct phy *phy)
+{
+ struct twl4030_usb *twl = phy_get_drvdata(phy);
+
+ dev_dbg(twl->dev, "%s\n", __func__);
+ pm_runtime_get_sync(twl->dev);
+ schedule_delayed_work(&twl->id_workaround_work, HZ);
+ pm_runtime_mark_last_busy(twl->dev);
+ pm_runtime_put_autosuspend(twl->dev);
+
+ return 0;
+}
+
+static int twl4030_usb_ldo_init(struct twl4030_usb *twl)
+{
+ /* Enable writing to power configuration registers */
+ twl_i2c_write_u8(TWL_MODULE_PM_MASTER, TWL4030_PM_MASTER_KEY_CFG1,
+ TWL4030_PM_MASTER_PROTECT_KEY);
+
+ twl_i2c_write_u8(TWL_MODULE_PM_MASTER, TWL4030_PM_MASTER_KEY_CFG2,
+ TWL4030_PM_MASTER_PROTECT_KEY);
+
+ /* Keep VUSB3V1 LDO in sleep state until VBUS/ID change detected*/
+ /*twl_i2c_write_u8(TWL_MODULE_PM_RECEIVER, 0, VUSB_DEDICATED2);*/
+
+ /* input to VUSB3V1 LDO is from VBAT, not VBUS */
+ twl_i2c_write_u8(TWL_MODULE_PM_RECEIVER, 0x14, VUSB_DEDICATED1);
+
+ /* Initialize 3.1V regulator */
+ twl_i2c_write_u8(TWL_MODULE_PM_RECEIVER, 0, VUSB3V1_DEV_GRP);
+
+ twl->usb3v1 = devm_regulator_get(twl->dev, "usb3v1");
+ if (IS_ERR(twl->usb3v1))
+ return -ENODEV;
+
+ twl_i2c_write_u8(TWL_MODULE_PM_RECEIVER, 0, VUSB3V1_TYPE);
+
+ /* Initialize 1.5V regulator */
+ twl_i2c_write_u8(TWL_MODULE_PM_RECEIVER, 0, VUSB1V5_DEV_GRP);
+
+ twl->usb1v5 = devm_regulator_get(twl->dev, "usb1v5");
+ if (IS_ERR(twl->usb1v5))
+ return -ENODEV;
+
+ twl_i2c_write_u8(TWL_MODULE_PM_RECEIVER, 0, VUSB1V5_TYPE);
+
+ /* Initialize 1.8V regulator */
+ twl_i2c_write_u8(TWL_MODULE_PM_RECEIVER, 0, VUSB1V8_DEV_GRP);
+
+ twl->usb1v8 = devm_regulator_get(twl->dev, "usb1v8");
+ if (IS_ERR(twl->usb1v8))
+ return -ENODEV;
+
+ twl_i2c_write_u8(TWL_MODULE_PM_RECEIVER, 0, VUSB1V8_TYPE);
+
+ /* disable access to power configuration registers */
+ twl_i2c_write_u8(TWL_MODULE_PM_MASTER, 0,
+ TWL4030_PM_MASTER_PROTECT_KEY);
+
+ return 0;
+}
+
+static ssize_t twl4030_usb_vbus_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct twl4030_usb *twl = dev_get_drvdata(dev);
+ int ret = -EINVAL;
+
+ mutex_lock(&twl->lock);
+ ret = sprintf(buf, "%s\n",
+ twl->vbus_supplied ? "on" : "off");
+ mutex_unlock(&twl->lock);
+
+ return ret;
+}
+static DEVICE_ATTR(vbus, 0444, twl4030_usb_vbus_show, NULL);
+
+static irqreturn_t twl4030_usb_irq(int irq, void *_twl)
+{
+ struct twl4030_usb *twl = _twl;
+ enum musb_vbus_id_status status;
+ int err;
+
+ status = twl4030_usb_linkstat(twl);
+
+ mutex_lock(&twl->lock);
+ twl->linkstat = status;
+ mutex_unlock(&twl->lock);
+
+ if (cable_present(status)) {
+ if (atomic_add_unless(&twl->connected, 1, 1)) {
+ dev_dbg(twl->dev, "%s: cable connected %i\n",
+ __func__, status);
+ pm_runtime_get_sync(twl->dev);
+ twl->musb_mailbox_pending = true;
+ }
+ } else {
+ if (atomic_add_unless(&twl->connected, -1, 0)) {
+ dev_dbg(twl->dev, "%s: cable disconnected %i\n",
+ __func__, status);
+ pm_runtime_mark_last_busy(twl->dev);
+ pm_runtime_put_autosuspend(twl->dev);
+ twl->musb_mailbox_pending = true;
+ }
+ }
+ if (twl->musb_mailbox_pending) {
+ err = musb_mailbox(status);
+ if (!err)
+ twl->musb_mailbox_pending = false;
+ }
+
+ /* don't schedule during sleep - irq works right then */
+ if (status == MUSB_ID_GROUND && pm_runtime_active(twl->dev)) {
+ cancel_delayed_work(&twl->id_workaround_work);
+ schedule_delayed_work(&twl->id_workaround_work, HZ);
+ }
+
+ if (irq)
+ sysfs_notify(&twl->dev->kobj, NULL, "vbus");
+
+ return IRQ_HANDLED;
+}
+
+static void twl4030_id_workaround_work(struct work_struct *work)
+{
+ struct twl4030_usb *twl = container_of(work, struct twl4030_usb,
+ id_workaround_work.work);
+
+ twl4030_usb_irq(0, twl);
+}
+
+static int twl4030_phy_init(struct phy *phy)
+{
+ struct twl4030_usb *twl = phy_get_drvdata(phy);
+
+ pm_runtime_get_sync(twl->dev);
+ twl->linkstat = MUSB_UNKNOWN;
+ schedule_delayed_work(&twl->id_workaround_work, HZ);
+ pm_runtime_mark_last_busy(twl->dev);
+ pm_runtime_put_autosuspend(twl->dev);
+
+ return 0;
+}
+
+static int twl4030_set_peripheral(struct usb_otg *otg,
+ struct usb_gadget *gadget)
+{
+ if (!otg)
+ return -ENODEV;
+
+ otg->gadget = gadget;
+ if (!gadget)
+ otg->state = OTG_STATE_UNDEFINED;
+
+ return 0;
+}
+
+static int twl4030_set_host(struct usb_otg *otg, struct usb_bus *host)
+{
+ if (!otg)
+ return -ENODEV;
+
+ otg->host = host;
+ if (!host)
+ otg->state = OTG_STATE_UNDEFINED;
+
+ return 0;
+}
+
+static const struct phy_ops ops = {
+ .init = twl4030_phy_init,
+ .power_on = twl4030_phy_power_on,
+ .power_off = twl4030_phy_power_off,
+ .owner = THIS_MODULE,
+};
+
+static const struct dev_pm_ops twl4030_usb_pm_ops = {
+ SET_RUNTIME_PM_OPS(twl4030_usb_runtime_suspend,
+ twl4030_usb_runtime_resume, NULL)
+ SET_SYSTEM_SLEEP_PM_OPS(twl4030_usb_suspend, twl4030_usb_resume)
+};
+
+static int twl4030_usb_probe(struct platform_device *pdev)
+{
+ struct twl4030_usb_data *pdata = dev_get_platdata(&pdev->dev);
+ struct twl4030_usb *twl;
+ struct phy *phy;
+ int status, err;
+ struct usb_otg *otg;
+ struct device_node *np = pdev->dev.of_node;
+ struct phy_provider *phy_provider;
+
+ twl = devm_kzalloc(&pdev->dev, sizeof(*twl), GFP_KERNEL);
+ if (!twl)
+ return -ENOMEM;
+
+ if (np)
+ of_property_read_u32(np, "usb_mode",
+ (enum twl4030_usb_mode *)&twl->usb_mode);
+ else if (pdata) {
+ twl->usb_mode = pdata->usb_mode;
+ } else {
+ dev_err(&pdev->dev, "twl4030 initialized without pdata\n");
+ return -EINVAL;
+ }
+
+ otg = devm_kzalloc(&pdev->dev, sizeof(*otg), GFP_KERNEL);
+ if (!otg)
+ return -ENOMEM;
+
+ twl->dev = &pdev->dev;
+ twl->irq = platform_get_irq(pdev, 0);
+ twl->vbus_supplied = false;
+ twl->linkstat = MUSB_UNKNOWN;
+ twl->musb_mailbox_pending = false;
+
+ twl->phy.dev = twl->dev;
+ twl->phy.label = "twl4030";
+ twl->phy.otg = otg;
+ twl->phy.type = USB_PHY_TYPE_USB2;
+
+ otg->usb_phy = &twl->phy;
+ otg->set_host = twl4030_set_host;
+ otg->set_peripheral = twl4030_set_peripheral;
+
+ phy = devm_phy_create(twl->dev, NULL, &ops);
+ if (IS_ERR(phy)) {
+ dev_dbg(&pdev->dev, "Failed to create PHY\n");
+ return PTR_ERR(phy);
+ }
+
+ phy_set_drvdata(phy, twl);
+
+ phy_provider = devm_of_phy_provider_register(twl->dev,
+ of_phy_simple_xlate);
+ if (IS_ERR(phy_provider))
+ return PTR_ERR(phy_provider);
+
+ /* init mutex for workqueue */
+ mutex_init(&twl->lock);
+
+ INIT_DELAYED_WORK(&twl->id_workaround_work, twl4030_id_workaround_work);
+
+ err = twl4030_usb_ldo_init(twl);
+ if (err) {
+ dev_err(&pdev->dev, "ldo init failed\n");
+ return err;
+ }
+ usb_add_phy_dev(&twl->phy);
+
+ platform_set_drvdata(pdev, twl);
+ if (device_create_file(&pdev->dev, &dev_attr_vbus))
+ dev_warn(&pdev->dev, "could not create sysfs file\n");
+
+ ATOMIC_INIT_NOTIFIER_HEAD(&twl->phy.notifier);
+
+ pm_runtime_use_autosuspend(&pdev->dev);
+ pm_runtime_set_autosuspend_delay(&pdev->dev, 2000);
+ pm_runtime_enable(&pdev->dev);
+ pm_runtime_get_sync(&pdev->dev);
+
+ /* Our job is to use irqs and status from the power module
+ * to keep the transceiver disabled when nothing's connected.
+ *
+ * FIXME we actually shouldn't start enabling it until the
+ * USB controller drivers have said they're ready, by calling
+ * set_host() and/or set_peripheral() ... OTG_capable boards
+ * need both handles, otherwise just one suffices.
+ */
+ status = devm_request_threaded_irq(twl->dev, twl->irq, NULL,
+ twl4030_usb_irq, IRQF_TRIGGER_FALLING |
+ IRQF_TRIGGER_RISING | IRQF_ONESHOT, "twl4030_usb", twl);
+ if (status < 0) {
+ dev_dbg(&pdev->dev, "can't get IRQ %d, err %d\n",
+ twl->irq, status);
+ return status;
+ }
+
+ if (pdata)
+ err = phy_create_lookup(phy, "usb", "musb-hdrc.0");
+ if (err)
+ return err;
+
+ pm_runtime_mark_last_busy(&pdev->dev);
+ pm_runtime_put_autosuspend(twl->dev);
+
+ dev_info(&pdev->dev, "Initialized TWL4030 USB module\n");
+ return 0;
+}
+
+static int twl4030_usb_remove(struct platform_device *pdev)
+{
+ struct twl4030_usb *twl = platform_get_drvdata(pdev);
+ int val;
+
+ usb_remove_phy(&twl->phy);
+ pm_runtime_get_sync(twl->dev);
+ cancel_delayed_work_sync(&twl->id_workaround_work);
+ device_remove_file(twl->dev, &dev_attr_vbus);
+
+ /* set transceiver mode to power on defaults */
+ twl4030_usb_set_mode(twl, -1);
+
+ /* idle ulpi before powering off */
+ if (cable_present(twl->linkstat))
+ pm_runtime_put_noidle(twl->dev);
+ pm_runtime_mark_last_busy(twl->dev);
+ pm_runtime_dont_use_autosuspend(&pdev->dev);
+ pm_runtime_put_sync(twl->dev);
+ pm_runtime_disable(twl->dev);
+
+ /* autogate 60MHz ULPI clock,
+ * clear dpll clock request for i2c access,
+ * disable 32KHz
+ */
+ val = twl4030_usb_read(twl, PHY_CLK_CTRL);
+ if (val >= 0) {
+ val |= PHY_CLK_CTRL_CLOCKGATING_EN;
+ val &= ~(PHY_CLK_CTRL_CLK32K_EN | REQ_PHY_DPLL_CLK);
+ twl4030_usb_write(twl, PHY_CLK_CTRL, (u8)val);
+ }
+
+ /* disable complete OTG block */
+ twl4030_usb_clear_bits(twl, POWER_CTRL, POWER_CTRL_OTG_ENAB);
+
+ return 0;
+}
+
+#ifdef CONFIG_OF
+static const struct of_device_id twl4030_usb_id_table[] = {
+ { .compatible = "ti,twl4030-usb" },
+ {}
+};
+MODULE_DEVICE_TABLE(of, twl4030_usb_id_table);
+#endif
+
+static struct platform_driver twl4030_usb_driver = {
+ .probe = twl4030_usb_probe,
+ .remove = twl4030_usb_remove,
+ .driver = {
+ .name = "twl4030_usb",
+ .pm = &twl4030_usb_pm_ops,
+ .of_match_table = of_match_ptr(twl4030_usb_id_table),
+ },
+};
+
+static int __init twl4030_usb_init(void)
+{
+ return platform_driver_register(&twl4030_usb_driver);
+}
+subsys_initcall(twl4030_usb_init);
+
+static void __exit twl4030_usb_exit(void)
+{
+ platform_driver_unregister(&twl4030_usb_driver);
+}
+module_exit(twl4030_usb_exit);
+
+MODULE_ALIAS("platform:twl4030_usb");
+MODULE_AUTHOR("Texas Instruments, Inc, Nokia Corporation");
+MODULE_DESCRIPTION("TWL4030 USB transceiver driver");
+MODULE_LICENSE("GPL");
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-01 04:32:30 +0000