summaryrefslogtreecommitdiffstats
path: root/drivers/power/supply/max8903_charger.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/power/supply/max8903_charger.c')
-rw-r--r--drivers/power/supply/max8903_charger.c445
1 files changed, 445 insertions, 0 deletions
diff --git a/drivers/power/supply/max8903_charger.c b/drivers/power/supply/max8903_charger.c
new file mode 100644
index 000000000..0bd39b0cc
--- /dev/null
+++ b/drivers/power/supply/max8903_charger.c
@@ -0,0 +1,445 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * max8903_charger.c - Maxim 8903 USB/Adapter Charger Driver
+ *
+ * Copyright (C) 2011 Samsung Electronics
+ * MyungJoo Ham <myungjoo.ham@samsung.com>
+ */
+
+#include <linux/gpio.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/of_gpio.h>
+#include <linux/slab.h>
+#include <linux/power_supply.h>
+#include <linux/platform_device.h>
+#include <linux/power/max8903_charger.h>
+
+struct max8903_data {
+ struct max8903_pdata *pdata;
+ struct device *dev;
+ struct power_supply *psy;
+ struct power_supply_desc psy_desc;
+ bool fault;
+ bool usb_in;
+ bool ta_in;
+};
+
+static enum power_supply_property max8903_charger_props[] = {
+ POWER_SUPPLY_PROP_STATUS, /* Charger status output */
+ POWER_SUPPLY_PROP_ONLINE, /* External power source */
+ POWER_SUPPLY_PROP_HEALTH, /* Fault or OK */
+};
+
+static int max8903_get_property(struct power_supply *psy,
+ enum power_supply_property psp,
+ union power_supply_propval *val)
+{
+ struct max8903_data *data = power_supply_get_drvdata(psy);
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_STATUS:
+ val->intval = POWER_SUPPLY_STATUS_UNKNOWN;
+ if (gpio_is_valid(data->pdata->chg)) {
+ if (gpio_get_value(data->pdata->chg) == 0)
+ val->intval = POWER_SUPPLY_STATUS_CHARGING;
+ else if (data->usb_in || data->ta_in)
+ val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING;
+ else
+ val->intval = POWER_SUPPLY_STATUS_DISCHARGING;
+ }
+ break;
+ case POWER_SUPPLY_PROP_ONLINE:
+ val->intval = 0;
+ if (data->usb_in || data->ta_in)
+ val->intval = 1;
+ break;
+ case POWER_SUPPLY_PROP_HEALTH:
+ val->intval = POWER_SUPPLY_HEALTH_GOOD;
+ if (data->fault)
+ val->intval = POWER_SUPPLY_HEALTH_UNSPEC_FAILURE;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static irqreturn_t max8903_dcin(int irq, void *_data)
+{
+ struct max8903_data *data = _data;
+ struct max8903_pdata *pdata = data->pdata;
+ bool ta_in;
+ enum power_supply_type old_type;
+
+ ta_in = gpio_get_value(pdata->dok) ? false : true;
+
+ if (ta_in == data->ta_in)
+ return IRQ_HANDLED;
+
+ data->ta_in = ta_in;
+
+ /* Set Current-Limit-Mode 1:DC 0:USB */
+ if (gpio_is_valid(pdata->dcm))
+ gpio_set_value(pdata->dcm, ta_in ? 1 : 0);
+
+ /* Charger Enable / Disable (cen is negated) */
+ if (gpio_is_valid(pdata->cen))
+ gpio_set_value(pdata->cen, ta_in ? 0 :
+ (data->usb_in ? 0 : 1));
+
+ dev_dbg(data->dev, "TA(DC-IN) Charger %s.\n", ta_in ?
+ "Connected" : "Disconnected");
+
+ old_type = data->psy_desc.type;
+
+ if (data->ta_in)
+ data->psy_desc.type = POWER_SUPPLY_TYPE_MAINS;
+ else if (data->usb_in)
+ data->psy_desc.type = POWER_SUPPLY_TYPE_USB;
+ else
+ data->psy_desc.type = POWER_SUPPLY_TYPE_BATTERY;
+
+ if (old_type != data->psy_desc.type)
+ power_supply_changed(data->psy);
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t max8903_usbin(int irq, void *_data)
+{
+ struct max8903_data *data = _data;
+ struct max8903_pdata *pdata = data->pdata;
+ bool usb_in;
+ enum power_supply_type old_type;
+
+ usb_in = gpio_get_value(pdata->uok) ? false : true;
+
+ if (usb_in == data->usb_in)
+ return IRQ_HANDLED;
+
+ data->usb_in = usb_in;
+
+ /* Do not touch Current-Limit-Mode */
+
+ /* Charger Enable / Disable (cen is negated) */
+ if (gpio_is_valid(pdata->cen))
+ gpio_set_value(pdata->cen, usb_in ? 0 :
+ (data->ta_in ? 0 : 1));
+
+ dev_dbg(data->dev, "USB Charger %s.\n", usb_in ?
+ "Connected" : "Disconnected");
+
+ old_type = data->psy_desc.type;
+
+ if (data->ta_in)
+ data->psy_desc.type = POWER_SUPPLY_TYPE_MAINS;
+ else if (data->usb_in)
+ data->psy_desc.type = POWER_SUPPLY_TYPE_USB;
+ else
+ data->psy_desc.type = POWER_SUPPLY_TYPE_BATTERY;
+
+ if (old_type != data->psy_desc.type)
+ power_supply_changed(data->psy);
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t max8903_fault(int irq, void *_data)
+{
+ struct max8903_data *data = _data;
+ struct max8903_pdata *pdata = data->pdata;
+ bool fault;
+
+ fault = gpio_get_value(pdata->flt) ? false : true;
+
+ if (fault == data->fault)
+ return IRQ_HANDLED;
+
+ data->fault = fault;
+
+ if (fault)
+ dev_err(data->dev, "Charger suffers a fault and stops.\n");
+ else
+ dev_err(data->dev, "Charger recovered from a fault.\n");
+
+ return IRQ_HANDLED;
+}
+
+static struct max8903_pdata *max8903_parse_dt_data(struct device *dev)
+{
+ struct device_node *np = dev->of_node;
+ struct max8903_pdata *pdata = NULL;
+
+ if (!np)
+ return NULL;
+
+ pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
+ if (!pdata)
+ return NULL;
+
+ pdata->dc_valid = false;
+ pdata->usb_valid = false;
+
+ pdata->cen = of_get_named_gpio(np, "cen-gpios", 0);
+ if (!gpio_is_valid(pdata->cen))
+ pdata->cen = -EINVAL;
+
+ pdata->chg = of_get_named_gpio(np, "chg-gpios", 0);
+ if (!gpio_is_valid(pdata->chg))
+ pdata->chg = -EINVAL;
+
+ pdata->flt = of_get_named_gpio(np, "flt-gpios", 0);
+ if (!gpio_is_valid(pdata->flt))
+ pdata->flt = -EINVAL;
+
+ pdata->usus = of_get_named_gpio(np, "usus-gpios", 0);
+ if (!gpio_is_valid(pdata->usus))
+ pdata->usus = -EINVAL;
+
+ pdata->dcm = of_get_named_gpio(np, "dcm-gpios", 0);
+ if (!gpio_is_valid(pdata->dcm))
+ pdata->dcm = -EINVAL;
+
+ pdata->dok = of_get_named_gpio(np, "dok-gpios", 0);
+ if (!gpio_is_valid(pdata->dok))
+ pdata->dok = -EINVAL;
+ else
+ pdata->dc_valid = true;
+
+ pdata->uok = of_get_named_gpio(np, "uok-gpios", 0);
+ if (!gpio_is_valid(pdata->uok))
+ pdata->uok = -EINVAL;
+ else
+ pdata->usb_valid = true;
+
+ return pdata;
+}
+
+static int max8903_setup_gpios(struct platform_device *pdev)
+{
+ struct max8903_data *data = platform_get_drvdata(pdev);
+ struct device *dev = &pdev->dev;
+ struct max8903_pdata *pdata = pdev->dev.platform_data;
+ int ret = 0;
+ int gpio;
+ int ta_in = 0;
+ int usb_in = 0;
+
+ if (pdata->dc_valid) {
+ if (gpio_is_valid(pdata->dok)) {
+ ret = devm_gpio_request(dev, pdata->dok,
+ data->psy_desc.name);
+ if (ret) {
+ dev_err(dev,
+ "Failed GPIO request for dok: %d err %d\n",
+ pdata->dok, ret);
+ return ret;
+ }
+
+ gpio = pdata->dok; /* PULL_UPed Interrupt */
+ ta_in = gpio_get_value(gpio) ? 0 : 1;
+ } else {
+ dev_err(dev, "When DC is wired, DOK should be wired as well.\n");
+ return -EINVAL;
+ }
+ }
+
+ if (gpio_is_valid(pdata->dcm)) {
+ ret = devm_gpio_request(dev, pdata->dcm, data->psy_desc.name);
+ if (ret) {
+ dev_err(dev,
+ "Failed GPIO request for dcm: %d err %d\n",
+ pdata->dcm, ret);
+ return ret;
+ }
+
+ gpio = pdata->dcm; /* Output */
+ gpio_set_value(gpio, ta_in);
+ }
+
+ if (pdata->usb_valid) {
+ if (gpio_is_valid(pdata->uok)) {
+ ret = devm_gpio_request(dev, pdata->uok,
+ data->psy_desc.name);
+ if (ret) {
+ dev_err(dev,
+ "Failed GPIO request for uok: %d err %d\n",
+ pdata->uok, ret);
+ return ret;
+ }
+
+ gpio = pdata->uok;
+ usb_in = gpio_get_value(gpio) ? 0 : 1;
+ } else {
+ dev_err(dev, "When USB is wired, UOK should be wired."
+ "as well.\n");
+ return -EINVAL;
+ }
+ }
+
+ if (gpio_is_valid(pdata->cen)) {
+ ret = devm_gpio_request(dev, pdata->cen, data->psy_desc.name);
+ if (ret) {
+ dev_err(dev,
+ "Failed GPIO request for cen: %d err %d\n",
+ pdata->cen, ret);
+ return ret;
+ }
+
+ gpio_set_value(pdata->cen, (ta_in || usb_in) ? 0 : 1);
+ }
+
+ if (gpio_is_valid(pdata->chg)) {
+ ret = devm_gpio_request(dev, pdata->chg, data->psy_desc.name);
+ if (ret) {
+ dev_err(dev,
+ "Failed GPIO request for chg: %d err %d\n",
+ pdata->chg, ret);
+ return ret;
+ }
+ }
+
+ if (gpio_is_valid(pdata->flt)) {
+ ret = devm_gpio_request(dev, pdata->flt, data->psy_desc.name);
+ if (ret) {
+ dev_err(dev,
+ "Failed GPIO request for flt: %d err %d\n",
+ pdata->flt, ret);
+ return ret;
+ }
+ }
+
+ if (gpio_is_valid(pdata->usus)) {
+ ret = devm_gpio_request(dev, pdata->usus, data->psy_desc.name);
+ if (ret) {
+ dev_err(dev,
+ "Failed GPIO request for usus: %d err %d\n",
+ pdata->usus, ret);
+ return ret;
+ }
+ }
+
+ data->fault = false;
+ data->ta_in = ta_in;
+ data->usb_in = usb_in;
+
+ return 0;
+}
+
+static int max8903_probe(struct platform_device *pdev)
+{
+ struct max8903_data *data;
+ struct device *dev = &pdev->dev;
+ struct max8903_pdata *pdata = pdev->dev.platform_data;
+ struct power_supply_config psy_cfg = {};
+ int ret = 0;
+
+ data = devm_kzalloc(dev, sizeof(struct max8903_data), GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
+
+ if (IS_ENABLED(CONFIG_OF) && !pdata && dev->of_node)
+ pdata = max8903_parse_dt_data(dev);
+
+ if (!pdata) {
+ dev_err(dev, "No platform data.\n");
+ return -EINVAL;
+ }
+
+ pdev->dev.platform_data = pdata;
+ data->pdata = pdata;
+ data->dev = dev;
+ platform_set_drvdata(pdev, data);
+
+ if (pdata->dc_valid == false && pdata->usb_valid == false) {
+ dev_err(dev, "No valid power sources.\n");
+ return -EINVAL;
+ }
+
+ ret = max8903_setup_gpios(pdev);
+ if (ret)
+ return ret;
+
+ data->psy_desc.name = "max8903_charger";
+ data->psy_desc.type = (data->ta_in) ? POWER_SUPPLY_TYPE_MAINS :
+ ((data->usb_in) ? POWER_SUPPLY_TYPE_USB :
+ POWER_SUPPLY_TYPE_BATTERY);
+ data->psy_desc.get_property = max8903_get_property;
+ data->psy_desc.properties = max8903_charger_props;
+ data->psy_desc.num_properties = ARRAY_SIZE(max8903_charger_props);
+
+ psy_cfg.of_node = dev->of_node;
+ psy_cfg.drv_data = data;
+
+ data->psy = devm_power_supply_register(dev, &data->psy_desc, &psy_cfg);
+ if (IS_ERR(data->psy)) {
+ dev_err(dev, "failed: power supply register.\n");
+ return PTR_ERR(data->psy);
+ }
+
+ if (pdata->dc_valid) {
+ ret = devm_request_threaded_irq(dev, gpio_to_irq(pdata->dok),
+ NULL, max8903_dcin,
+ IRQF_TRIGGER_FALLING |
+ IRQF_TRIGGER_RISING | IRQF_ONESHOT,
+ "MAX8903 DC IN", data);
+ if (ret) {
+ dev_err(dev, "Cannot request irq %d for DC (%d)\n",
+ gpio_to_irq(pdata->dok), ret);
+ return ret;
+ }
+ }
+
+ if (pdata->usb_valid) {
+ ret = devm_request_threaded_irq(dev, gpio_to_irq(pdata->uok),
+ NULL, max8903_usbin,
+ IRQF_TRIGGER_FALLING |
+ IRQF_TRIGGER_RISING | IRQF_ONESHOT,
+ "MAX8903 USB IN", data);
+ if (ret) {
+ dev_err(dev, "Cannot request irq %d for USB (%d)\n",
+ gpio_to_irq(pdata->uok), ret);
+ return ret;
+ }
+ }
+
+ if (gpio_is_valid(pdata->flt)) {
+ ret = devm_request_threaded_irq(dev, gpio_to_irq(pdata->flt),
+ NULL, max8903_fault,
+ IRQF_TRIGGER_FALLING |
+ IRQF_TRIGGER_RISING | IRQF_ONESHOT,
+ "MAX8903 Fault", data);
+ if (ret) {
+ dev_err(dev, "Cannot request irq %d for Fault (%d)\n",
+ gpio_to_irq(pdata->flt), ret);
+ return ret;
+ }
+ }
+
+ return 0;
+}
+
+static const struct of_device_id max8903_match_ids[] = {
+ { .compatible = "maxim,max8903", },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, max8903_match_ids);
+
+static struct platform_driver max8903_driver = {
+ .probe = max8903_probe,
+ .driver = {
+ .name = "max8903-charger",
+ .of_match_table = max8903_match_ids
+ },
+};
+
+module_platform_driver(max8903_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("MAX8903 Charger Driver");
+MODULE_AUTHOR("MyungJoo Ham <myungjoo.ham@samsung.com>");
+MODULE_ALIAS("platform:max8903-charger");