diff options
Diffstat (limited to 'drivers/power/supply/max8925_power.c')
| -rw-r--r-- | drivers/power/supply/max8925_power.c | 594 |
1 files changed, 594 insertions, 0 deletions
diff --git a/drivers/power/supply/max8925_power.c b/drivers/power/supply/max8925_power.c new file mode 100644 index 000000000..8878f9131 --- /dev/null +++ b/drivers/power/supply/max8925_power.c @@ -0,0 +1,594 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Battery driver for Maxim MAX8925 + * + * Copyright (c) 2009-2010 Marvell International Ltd. + * Haojian Zhuang <haojian.zhuang@marvell.com> + */ + +#include <linux/module.h> +#include <linux/err.h> +#include <linux/slab.h> +#include <linux/of.h> +#include <linux/i2c.h> +#include <linux/interrupt.h> +#include <linux/platform_device.h> +#include <linux/power_supply.h> +#include <linux/mfd/max8925.h> + +/* registers in GPM */ +#define MAX8925_OUT5VEN 0x54 +#define MAX8925_OUT3VEN 0x58 +#define MAX8925_CHG_CNTL1 0x7c + +/* bits definition */ +#define MAX8925_CHG_STAT_VSYSLOW (1 << 0) +#define MAX8925_CHG_STAT_MODE_MASK (3 << 2) +#define MAX8925_CHG_STAT_EN_MASK (1 << 4) +#define MAX8925_CHG_MBDET (1 << 1) +#define MAX8925_CHG_AC_RANGE_MASK (3 << 6) + +/* registers in ADC */ +#define MAX8925_ADC_RES_CNFG1 0x06 +#define MAX8925_ADC_AVG_CNFG1 0x07 +#define MAX8925_ADC_ACQ_CNFG1 0x08 +#define MAX8925_ADC_ACQ_CNFG2 0x09 +/* 2 bytes registers in below. MSB is 1st, LSB is 2nd. */ +#define MAX8925_ADC_AUX2 0x62 +#define MAX8925_ADC_VCHG 0x64 +#define MAX8925_ADC_VBBATT 0x66 +#define MAX8925_ADC_VMBATT 0x68 +#define MAX8925_ADC_ISNS 0x6a +#define MAX8925_ADC_THM 0x6c +#define MAX8925_ADC_TDIE 0x6e +#define MAX8925_CMD_AUX2 0xc8 +#define MAX8925_CMD_VCHG 0xd0 +#define MAX8925_CMD_VBBATT 0xd8 +#define MAX8925_CMD_VMBATT 0xe0 +#define MAX8925_CMD_ISNS 0xe8 +#define MAX8925_CMD_THM 0xf0 +#define MAX8925_CMD_TDIE 0xf8 + +enum { + MEASURE_AUX2, + MEASURE_VCHG, + MEASURE_VBBATT, + MEASURE_VMBATT, + MEASURE_ISNS, + MEASURE_THM, + MEASURE_TDIE, + MEASURE_MAX, +}; + +struct max8925_power_info { + struct max8925_chip *chip; + struct i2c_client *gpm; + struct i2c_client *adc; + + struct power_supply *ac; + struct power_supply *usb; + struct power_supply *battery; + int irq_base; + unsigned ac_online:1; + unsigned usb_online:1; + unsigned bat_online:1; + unsigned chg_mode:2; + unsigned batt_detect:1; /* detecing MB by ID pin */ + unsigned topoff_threshold:2; + unsigned fast_charge:3; + unsigned no_temp_support:1; + unsigned no_insert_detect:1; + + int (*set_charger) (int); +}; + +static int __set_charger(struct max8925_power_info *info, int enable) +{ + struct max8925_chip *chip = info->chip; + if (enable) { + /* enable charger in platform */ + if (info->set_charger) + info->set_charger(1); + /* enable charger */ + max8925_set_bits(info->gpm, MAX8925_CHG_CNTL1, 1 << 7, 0); + } else { + /* disable charge */ + max8925_set_bits(info->gpm, MAX8925_CHG_CNTL1, 1 << 7, 1 << 7); + if (info->set_charger) + info->set_charger(0); + } + dev_dbg(chip->dev, "%s\n", (enable) ? "Enable charger" + : "Disable charger"); + return 0; +} + +static irqreturn_t max8925_charger_handler(int irq, void *data) +{ + struct max8925_power_info *info = (struct max8925_power_info *)data; + struct max8925_chip *chip = info->chip; + + switch (irq - chip->irq_base) { + case MAX8925_IRQ_VCHG_DC_R: + info->ac_online = 1; + __set_charger(info, 1); + dev_dbg(chip->dev, "Adapter inserted\n"); + break; + case MAX8925_IRQ_VCHG_DC_F: + info->ac_online = 0; + __set_charger(info, 0); + dev_dbg(chip->dev, "Adapter removed\n"); + break; + case MAX8925_IRQ_VCHG_THM_OK_F: + /* Battery is not ready yet */ + dev_dbg(chip->dev, "Battery temperature is out of range\n"); + fallthrough; + case MAX8925_IRQ_VCHG_DC_OVP: + dev_dbg(chip->dev, "Error detection\n"); + __set_charger(info, 0); + break; + case MAX8925_IRQ_VCHG_THM_OK_R: + /* Battery is ready now */ + dev_dbg(chip->dev, "Battery temperature is in range\n"); + break; + case MAX8925_IRQ_VCHG_SYSLOW_R: + /* VSYS is low */ + dev_info(chip->dev, "Sys power is too low\n"); + break; + case MAX8925_IRQ_VCHG_SYSLOW_F: + dev_dbg(chip->dev, "Sys power is above low threshold\n"); + break; + case MAX8925_IRQ_VCHG_DONE: + __set_charger(info, 0); + dev_dbg(chip->dev, "Charging is done\n"); + break; + case MAX8925_IRQ_VCHG_TOPOFF: + dev_dbg(chip->dev, "Charging in top-off mode\n"); + break; + case MAX8925_IRQ_VCHG_TMR_FAULT: + __set_charger(info, 0); + dev_dbg(chip->dev, "Safe timer is expired\n"); + break; + case MAX8925_IRQ_VCHG_RST: + __set_charger(info, 0); + dev_dbg(chip->dev, "Charger is reset\n"); + break; + } + return IRQ_HANDLED; +} + +static int start_measure(struct max8925_power_info *info, int type) +{ + unsigned char buf[2] = {0, 0}; + int meas_cmd; + int meas_reg = 0, ret; + + switch (type) { + case MEASURE_VCHG: + meas_cmd = MAX8925_CMD_VCHG; + meas_reg = MAX8925_ADC_VCHG; + break; + case MEASURE_VBBATT: + meas_cmd = MAX8925_CMD_VBBATT; + meas_reg = MAX8925_ADC_VBBATT; + break; + case MEASURE_VMBATT: + meas_cmd = MAX8925_CMD_VMBATT; + meas_reg = MAX8925_ADC_VMBATT; + break; + case MEASURE_ISNS: + meas_cmd = MAX8925_CMD_ISNS; + meas_reg = MAX8925_ADC_ISNS; + break; + default: + return -EINVAL; + } + + max8925_reg_write(info->adc, meas_cmd, 0); + max8925_bulk_read(info->adc, meas_reg, 2, buf); + ret = ((buf[0]<<8) | buf[1]) >> 4; + + return ret; +} + +static int max8925_ac_get_prop(struct power_supply *psy, + enum power_supply_property psp, + union power_supply_propval *val) +{ + struct max8925_power_info *info = dev_get_drvdata(psy->dev.parent); + int ret = 0; + + switch (psp) { + case POWER_SUPPLY_PROP_ONLINE: + val->intval = info->ac_online; + break; + case POWER_SUPPLY_PROP_VOLTAGE_NOW: + if (info->ac_online) { + ret = start_measure(info, MEASURE_VCHG); + if (ret >= 0) { + val->intval = ret * 2000; /* unit is uV */ + goto out; + } + } + ret = -ENODATA; + break; + default: + ret = -ENODEV; + break; + } +out: + return ret; +} + +static enum power_supply_property max8925_ac_props[] = { + POWER_SUPPLY_PROP_ONLINE, + POWER_SUPPLY_PROP_VOLTAGE_NOW, +}; + +static int max8925_usb_get_prop(struct power_supply *psy, + enum power_supply_property psp, + union power_supply_propval *val) +{ + struct max8925_power_info *info = dev_get_drvdata(psy->dev.parent); + int ret = 0; + + switch (psp) { + case POWER_SUPPLY_PROP_ONLINE: + val->intval = info->usb_online; + break; + case POWER_SUPPLY_PROP_VOLTAGE_NOW: + if (info->usb_online) { + ret = start_measure(info, MEASURE_VCHG); + if (ret >= 0) { + val->intval = ret * 2000; /* unit is uV */ + goto out; + } + } + ret = -ENODATA; + break; + default: + ret = -ENODEV; + break; + } +out: + return ret; +} + +static enum power_supply_property max8925_usb_props[] = { + POWER_SUPPLY_PROP_ONLINE, + POWER_SUPPLY_PROP_VOLTAGE_NOW, +}; + +static int max8925_bat_get_prop(struct power_supply *psy, + enum power_supply_property psp, + union power_supply_propval *val) +{ + struct max8925_power_info *info = dev_get_drvdata(psy->dev.parent); + int ret = 0; + + switch (psp) { + case POWER_SUPPLY_PROP_ONLINE: + val->intval = info->bat_online; + break; + case POWER_SUPPLY_PROP_VOLTAGE_NOW: + if (info->bat_online) { + ret = start_measure(info, MEASURE_VMBATT); + if (ret >= 0) { + val->intval = ret * 2000; /* unit is uV */ + ret = 0; + break; + } + } + ret = -ENODATA; + break; + case POWER_SUPPLY_PROP_CURRENT_NOW: + if (info->bat_online) { + ret = start_measure(info, MEASURE_ISNS); + if (ret >= 0) { + /* assume r_sns is 0.02 */ + ret = ((ret * 6250) - 3125) /* uA */; + val->intval = 0; + if (ret > 0) + val->intval = ret; /* unit is mA */ + ret = 0; + break; + } + } + ret = -ENODATA; + break; + case POWER_SUPPLY_PROP_CHARGE_TYPE: + if (!info->bat_online) { + ret = -ENODATA; + break; + } + ret = max8925_reg_read(info->gpm, MAX8925_CHG_STATUS); + ret = (ret & MAX8925_CHG_STAT_MODE_MASK) >> 2; + switch (ret) { + case 1: + val->intval = POWER_SUPPLY_CHARGE_TYPE_FAST; + break; + case 0: + case 2: + val->intval = POWER_SUPPLY_CHARGE_TYPE_TRICKLE; + break; + case 3: + val->intval = POWER_SUPPLY_CHARGE_TYPE_NONE; + break; + } + ret = 0; + break; + case POWER_SUPPLY_PROP_STATUS: + if (!info->bat_online) { + ret = -ENODATA; + break; + } + ret = max8925_reg_read(info->gpm, MAX8925_CHG_STATUS); + if (info->usb_online || info->ac_online) { + val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING; + if (ret & MAX8925_CHG_STAT_EN_MASK) + val->intval = POWER_SUPPLY_STATUS_CHARGING; + } else + val->intval = POWER_SUPPLY_STATUS_DISCHARGING; + ret = 0; + break; + default: + ret = -ENODEV; + break; + } + return ret; +} + +static enum power_supply_property max8925_battery_props[] = { + POWER_SUPPLY_PROP_ONLINE, + POWER_SUPPLY_PROP_VOLTAGE_NOW, + POWER_SUPPLY_PROP_CURRENT_NOW, + POWER_SUPPLY_PROP_CHARGE_TYPE, + POWER_SUPPLY_PROP_STATUS, +}; + +static const struct power_supply_desc ac_desc = { + .name = "max8925-ac", + .type = POWER_SUPPLY_TYPE_MAINS, + .properties = max8925_ac_props, + .num_properties = ARRAY_SIZE(max8925_ac_props), + .get_property = max8925_ac_get_prop, +}; + +static const struct power_supply_desc usb_desc = { + .name = "max8925-usb", + .type = POWER_SUPPLY_TYPE_USB, + .properties = max8925_usb_props, + .num_properties = ARRAY_SIZE(max8925_usb_props), + .get_property = max8925_usb_get_prop, +}; + +static const struct power_supply_desc battery_desc = { + .name = "max8925-battery", + .type = POWER_SUPPLY_TYPE_BATTERY, + .properties = max8925_battery_props, + .num_properties = ARRAY_SIZE(max8925_battery_props), + .get_property = max8925_bat_get_prop, +}; + +#define REQUEST_IRQ(_irq, _name) \ +do { \ + ret = request_threaded_irq(chip->irq_base + _irq, NULL, \ + max8925_charger_handler, \ + IRQF_ONESHOT, _name, info); \ + if (ret) \ + dev_err(chip->dev, "Failed to request IRQ #%d: %d\n", \ + _irq, ret); \ +} while (0) + +static int max8925_init_charger(struct max8925_chip *chip, + struct max8925_power_info *info) +{ + int ret; + + REQUEST_IRQ(MAX8925_IRQ_VCHG_DC_OVP, "ac-ovp"); + if (!info->no_insert_detect) { + REQUEST_IRQ(MAX8925_IRQ_VCHG_DC_F, "ac-remove"); + REQUEST_IRQ(MAX8925_IRQ_VCHG_DC_R, "ac-insert"); + } + if (!info->no_temp_support) { + REQUEST_IRQ(MAX8925_IRQ_VCHG_THM_OK_R, "batt-temp-in-range"); + REQUEST_IRQ(MAX8925_IRQ_VCHG_THM_OK_F, "batt-temp-out-range"); + } + REQUEST_IRQ(MAX8925_IRQ_VCHG_SYSLOW_F, "vsys-high"); + REQUEST_IRQ(MAX8925_IRQ_VCHG_SYSLOW_R, "vsys-low"); + REQUEST_IRQ(MAX8925_IRQ_VCHG_RST, "charger-reset"); + REQUEST_IRQ(MAX8925_IRQ_VCHG_DONE, "charger-done"); + REQUEST_IRQ(MAX8925_IRQ_VCHG_TOPOFF, "charger-topoff"); + REQUEST_IRQ(MAX8925_IRQ_VCHG_TMR_FAULT, "charger-timer-expire"); + + info->usb_online = 0; + info->bat_online = 0; + + /* check for power - can miss interrupt at boot time */ + if (start_measure(info, MEASURE_VCHG) * 2000 > 500000) + info->ac_online = 1; + else + info->ac_online = 0; + + ret = max8925_reg_read(info->gpm, MAX8925_CHG_STATUS); + if (ret >= 0) { + /* + * If battery detection is enabled, ID pin of battery is + * connected to MBDET pin of MAX8925. It could be used to + * detect battery presence. + * Otherwise, we have to assume that battery is always on. + */ + if (info->batt_detect) + info->bat_online = (ret & MAX8925_CHG_MBDET) ? 0 : 1; + else + info->bat_online = 1; + if (ret & MAX8925_CHG_AC_RANGE_MASK) + info->ac_online = 1; + else + info->ac_online = 0; + } + /* disable charge */ + max8925_set_bits(info->gpm, MAX8925_CHG_CNTL1, 1 << 7, 1 << 7); + /* set charging current in charge topoff mode */ + max8925_set_bits(info->gpm, MAX8925_CHG_CNTL1, 3 << 5, + info->topoff_threshold << 5); + /* set charing current in fast charge mode */ + max8925_set_bits(info->gpm, MAX8925_CHG_CNTL1, 7, info->fast_charge); + + return 0; +} + +static int max8925_deinit_charger(struct max8925_power_info *info) +{ + struct max8925_chip *chip = info->chip; + int irq; + + irq = chip->irq_base + MAX8925_IRQ_VCHG_DC_OVP; + for (; irq <= chip->irq_base + MAX8925_IRQ_VCHG_TMR_FAULT; irq++) + free_irq(irq, info); + + return 0; +} + +#ifdef CONFIG_OF +static struct max8925_power_pdata * +max8925_power_dt_init(struct platform_device *pdev) +{ + struct device_node *nproot = pdev->dev.parent->of_node; + struct device_node *np; + int batt_detect; + int topoff_threshold; + int fast_charge; + int no_temp_support; + int no_insert_detect; + struct max8925_power_pdata *pdata; + + if (!nproot) + return pdev->dev.platform_data; + + np = of_get_child_by_name(nproot, "charger"); + if (!np) { + dev_err(&pdev->dev, "failed to find charger node\n"); + return NULL; + } + + pdata = devm_kzalloc(&pdev->dev, + sizeof(struct max8925_power_pdata), + GFP_KERNEL); + if (!pdata) + goto ret; + + of_property_read_u32(np, "topoff-threshold", &topoff_threshold); + of_property_read_u32(np, "batt-detect", &batt_detect); + of_property_read_u32(np, "fast-charge", &fast_charge); + of_property_read_u32(np, "no-insert-detect", &no_insert_detect); + of_property_read_u32(np, "no-temp-support", &no_temp_support); + + pdata->batt_detect = batt_detect; + pdata->fast_charge = fast_charge; + pdata->topoff_threshold = topoff_threshold; + pdata->no_insert_detect = no_insert_detect; + pdata->no_temp_support = no_temp_support; + +ret: + of_node_put(np); + return pdata; +} +#else +static struct max8925_power_pdata * +max8925_power_dt_init(struct platform_device *pdev) +{ + return pdev->dev.platform_data; +} +#endif + +static int max8925_power_probe(struct platform_device *pdev) +{ + struct max8925_chip *chip = dev_get_drvdata(pdev->dev.parent); + struct power_supply_config psy_cfg = {}; /* Only for ac and usb */ + struct max8925_power_pdata *pdata = NULL; + struct max8925_power_info *info; + int ret; + + pdata = max8925_power_dt_init(pdev); + if (!pdata) { + dev_err(&pdev->dev, "platform data isn't assigned to " + "power supply\n"); + return -EINVAL; + } + + info = devm_kzalloc(&pdev->dev, sizeof(struct max8925_power_info), + GFP_KERNEL); + if (!info) + return -ENOMEM; + info->chip = chip; + info->gpm = chip->i2c; + info->adc = chip->adc; + platform_set_drvdata(pdev, info); + + psy_cfg.supplied_to = pdata->supplied_to; + psy_cfg.num_supplicants = pdata->num_supplicants; + + info->ac = power_supply_register(&pdev->dev, &ac_desc, &psy_cfg); + if (IS_ERR(info->ac)) { + ret = PTR_ERR(info->ac); + goto out; + } + info->ac->dev.parent = &pdev->dev; + + info->usb = power_supply_register(&pdev->dev, &usb_desc, &psy_cfg); + if (IS_ERR(info->usb)) { + ret = PTR_ERR(info->usb); + goto out_unregister_ac; + } + info->usb->dev.parent = &pdev->dev; + + info->battery = power_supply_register(&pdev->dev, &battery_desc, NULL); + if (IS_ERR(info->battery)) { + ret = PTR_ERR(info->battery); + goto out_unregister_usb; + } + info->battery->dev.parent = &pdev->dev; + + info->batt_detect = pdata->batt_detect; + info->topoff_threshold = pdata->topoff_threshold; + info->fast_charge = pdata->fast_charge; + info->set_charger = pdata->set_charger; + info->no_temp_support = pdata->no_temp_support; + info->no_insert_detect = pdata->no_insert_detect; + + max8925_init_charger(chip, info); + return 0; +out_unregister_usb: + power_supply_unregister(info->usb); +out_unregister_ac: + power_supply_unregister(info->ac); +out: + return ret; +} + +static int max8925_power_remove(struct platform_device *pdev) +{ + struct max8925_power_info *info = platform_get_drvdata(pdev); + + if (info) { + power_supply_unregister(info->ac); + power_supply_unregister(info->usb); + power_supply_unregister(info->battery); + max8925_deinit_charger(info); + } + return 0; +} + +static struct platform_driver max8925_power_driver = { + .probe = max8925_power_probe, + .remove = max8925_power_remove, + .driver = { + .name = "max8925-power", + }, +}; + +module_platform_driver(max8925_power_driver); + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("Power supply driver for MAX8925"); +MODULE_ALIAS("platform:max8925-power"); |