diff options
Diffstat (limited to '')
| -rw-r--r-- | drivers/power/supply/sbs-battery.c | 1267 |
1 files changed, 1267 insertions, 0 deletions
diff --git a/drivers/power/supply/sbs-battery.c b/drivers/power/supply/sbs-battery.c new file mode 100644 index 000000000..b6a538ebb --- /dev/null +++ b/drivers/power/supply/sbs-battery.c @@ -0,0 +1,1267 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Gas Gauge driver for SBS Compliant Batteries + * + * Copyright (c) 2010, NVIDIA Corporation. + */ + +#include <linux/bits.h> +#include <linux/delay.h> +#include <linux/err.h> +#include <linux/gpio/consumer.h> +#include <linux/i2c.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/property.h> +#include <linux/of_device.h> +#include <linux/power/sbs-battery.h> +#include <linux/power_supply.h> +#include <linux/slab.h> +#include <linux/stat.h> + +enum { + REG_MANUFACTURER_DATA, + REG_BATTERY_MODE, + REG_TEMPERATURE, + REG_VOLTAGE, + REG_CURRENT_NOW, + REG_CURRENT_AVG, + REG_MAX_ERR, + REG_CAPACITY, + REG_TIME_TO_EMPTY, + REG_TIME_TO_FULL, + REG_STATUS, + REG_CAPACITY_LEVEL, + REG_CYCLE_COUNT, + REG_SERIAL_NUMBER, + REG_REMAINING_CAPACITY, + REG_REMAINING_CAPACITY_CHARGE, + REG_FULL_CHARGE_CAPACITY, + REG_FULL_CHARGE_CAPACITY_CHARGE, + REG_DESIGN_CAPACITY, + REG_DESIGN_CAPACITY_CHARGE, + REG_DESIGN_VOLTAGE_MIN, + REG_DESIGN_VOLTAGE_MAX, + REG_CHEMISTRY, + REG_MANUFACTURER, + REG_MODEL_NAME, + REG_CHARGE_CURRENT, + REG_CHARGE_VOLTAGE, +}; + +#define REG_ADDR_SPEC_INFO 0x1A +#define SPEC_INFO_VERSION_MASK GENMASK(7, 4) +#define SPEC_INFO_VERSION_SHIFT 4 + +#define SBS_VERSION_1_0 1 +#define SBS_VERSION_1_1 2 +#define SBS_VERSION_1_1_WITH_PEC 3 + +#define REG_ADDR_MANUFACTURE_DATE 0x1B + +/* Battery Mode defines */ +#define BATTERY_MODE_OFFSET 0x03 +#define BATTERY_MODE_CAPACITY_MASK BIT(15) +enum sbs_capacity_mode { + CAPACITY_MODE_AMPS = 0, + CAPACITY_MODE_WATTS = BATTERY_MODE_CAPACITY_MASK +}; +#define BATTERY_MODE_CHARGER_MASK (1<<14) + +/* manufacturer access defines */ +#define MANUFACTURER_ACCESS_STATUS 0x0006 +#define MANUFACTURER_ACCESS_SLEEP 0x0011 + +/* battery status value bits */ +#define BATTERY_INITIALIZED 0x80 +#define BATTERY_DISCHARGING 0x40 +#define BATTERY_FULL_CHARGED 0x20 +#define BATTERY_FULL_DISCHARGED 0x10 + +/* min_value and max_value are only valid for numerical data */ +#define SBS_DATA(_psp, _addr, _min_value, _max_value) { \ + .psp = _psp, \ + .addr = _addr, \ + .min_value = _min_value, \ + .max_value = _max_value, \ +} + +static const struct chip_data { + enum power_supply_property psp; + u8 addr; + int min_value; + int max_value; +} sbs_data[] = { + [REG_MANUFACTURER_DATA] = + SBS_DATA(POWER_SUPPLY_PROP_PRESENT, 0x00, 0, 65535), + [REG_BATTERY_MODE] = + SBS_DATA(-1, 0x03, 0, 65535), + [REG_TEMPERATURE] = + SBS_DATA(POWER_SUPPLY_PROP_TEMP, 0x08, 0, 65535), + [REG_VOLTAGE] = + SBS_DATA(POWER_SUPPLY_PROP_VOLTAGE_NOW, 0x09, 0, 20000), + [REG_CURRENT_NOW] = + SBS_DATA(POWER_SUPPLY_PROP_CURRENT_NOW, 0x0A, -32768, 32767), + [REG_CURRENT_AVG] = + SBS_DATA(POWER_SUPPLY_PROP_CURRENT_AVG, 0x0B, -32768, 32767), + [REG_MAX_ERR] = + SBS_DATA(POWER_SUPPLY_PROP_CAPACITY_ERROR_MARGIN, 0x0c, 0, 100), + [REG_CAPACITY] = + SBS_DATA(POWER_SUPPLY_PROP_CAPACITY, 0x0D, 0, 100), + [REG_REMAINING_CAPACITY] = + SBS_DATA(POWER_SUPPLY_PROP_ENERGY_NOW, 0x0F, 0, 65535), + [REG_REMAINING_CAPACITY_CHARGE] = + SBS_DATA(POWER_SUPPLY_PROP_CHARGE_NOW, 0x0F, 0, 65535), + [REG_FULL_CHARGE_CAPACITY] = + SBS_DATA(POWER_SUPPLY_PROP_ENERGY_FULL, 0x10, 0, 65535), + [REG_FULL_CHARGE_CAPACITY_CHARGE] = + SBS_DATA(POWER_SUPPLY_PROP_CHARGE_FULL, 0x10, 0, 65535), + [REG_TIME_TO_EMPTY] = + SBS_DATA(POWER_SUPPLY_PROP_TIME_TO_EMPTY_AVG, 0x12, 0, 65535), + [REG_TIME_TO_FULL] = + SBS_DATA(POWER_SUPPLY_PROP_TIME_TO_FULL_AVG, 0x13, 0, 65535), + [REG_CHARGE_CURRENT] = + SBS_DATA(POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX, 0x14, 0, 65535), + [REG_CHARGE_VOLTAGE] = + SBS_DATA(POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX, 0x15, 0, 65535), + [REG_STATUS] = + SBS_DATA(POWER_SUPPLY_PROP_STATUS, 0x16, 0, 65535), + [REG_CAPACITY_LEVEL] = + SBS_DATA(POWER_SUPPLY_PROP_CAPACITY_LEVEL, 0x16, 0, 65535), + [REG_CYCLE_COUNT] = + SBS_DATA(POWER_SUPPLY_PROP_CYCLE_COUNT, 0x17, 0, 65535), + [REG_DESIGN_CAPACITY] = + SBS_DATA(POWER_SUPPLY_PROP_ENERGY_FULL_DESIGN, 0x18, 0, 65535), + [REG_DESIGN_CAPACITY_CHARGE] = + SBS_DATA(POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN, 0x18, 0, 65535), + [REG_DESIGN_VOLTAGE_MIN] = + SBS_DATA(POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN, 0x19, 0, 65535), + [REG_DESIGN_VOLTAGE_MAX] = + SBS_DATA(POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN, 0x19, 0, 65535), + [REG_SERIAL_NUMBER] = + SBS_DATA(POWER_SUPPLY_PROP_SERIAL_NUMBER, 0x1C, 0, 65535), + /* Properties of type `const char *' */ + [REG_MANUFACTURER] = + SBS_DATA(POWER_SUPPLY_PROP_MANUFACTURER, 0x20, 0, 65535), + [REG_MODEL_NAME] = + SBS_DATA(POWER_SUPPLY_PROP_MODEL_NAME, 0x21, 0, 65535), + [REG_CHEMISTRY] = + SBS_DATA(POWER_SUPPLY_PROP_TECHNOLOGY, 0x22, 0, 65535) +}; + +static const enum power_supply_property sbs_properties[] = { + POWER_SUPPLY_PROP_STATUS, + POWER_SUPPLY_PROP_CAPACITY_LEVEL, + POWER_SUPPLY_PROP_HEALTH, + POWER_SUPPLY_PROP_PRESENT, + POWER_SUPPLY_PROP_TECHNOLOGY, + POWER_SUPPLY_PROP_CYCLE_COUNT, + POWER_SUPPLY_PROP_VOLTAGE_NOW, + POWER_SUPPLY_PROP_CURRENT_NOW, + POWER_SUPPLY_PROP_CURRENT_AVG, + POWER_SUPPLY_PROP_CAPACITY, + POWER_SUPPLY_PROP_CAPACITY_ERROR_MARGIN, + POWER_SUPPLY_PROP_TEMP, + POWER_SUPPLY_PROP_TIME_TO_EMPTY_AVG, + POWER_SUPPLY_PROP_TIME_TO_FULL_AVG, + POWER_SUPPLY_PROP_SERIAL_NUMBER, + POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN, + POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN, + POWER_SUPPLY_PROP_ENERGY_NOW, + POWER_SUPPLY_PROP_ENERGY_FULL, + POWER_SUPPLY_PROP_ENERGY_FULL_DESIGN, + POWER_SUPPLY_PROP_CHARGE_NOW, + POWER_SUPPLY_PROP_CHARGE_FULL, + POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN, + POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX, + POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX, + POWER_SUPPLY_PROP_MANUFACTURE_YEAR, + POWER_SUPPLY_PROP_MANUFACTURE_MONTH, + POWER_SUPPLY_PROP_MANUFACTURE_DAY, + /* Properties of type `const char *' */ + POWER_SUPPLY_PROP_MANUFACTURER, + POWER_SUPPLY_PROP_MODEL_NAME +}; + +/* Supports special manufacturer commands from TI BQ20Z65 and BQ20Z75 IC. */ +#define SBS_FLAGS_TI_BQ20ZX5 BIT(0) + +struct sbs_info { + struct i2c_client *client; + struct power_supply *power_supply; + bool is_present; + struct gpio_desc *gpio_detect; + bool charger_broadcasts; + int last_state; + int poll_time; + u32 i2c_retry_count; + u32 poll_retry_count; + struct delayed_work work; + struct mutex mode_lock; + u32 flags; +}; + +static char model_name[I2C_SMBUS_BLOCK_MAX + 1]; +static char manufacturer[I2C_SMBUS_BLOCK_MAX + 1]; +static char chemistry[I2C_SMBUS_BLOCK_MAX + 1]; +static bool force_load; + +static int sbs_read_word_data(struct i2c_client *client, u8 address); +static int sbs_write_word_data(struct i2c_client *client, u8 address, u16 value); + +static void sbs_disable_charger_broadcasts(struct sbs_info *chip) +{ + int val = sbs_read_word_data(chip->client, BATTERY_MODE_OFFSET); + if (val < 0) + goto exit; + + val |= BATTERY_MODE_CHARGER_MASK; + + val = sbs_write_word_data(chip->client, BATTERY_MODE_OFFSET, val); + +exit: + if (val < 0) + dev_err(&chip->client->dev, + "Failed to disable charger broadcasting: %d\n", val); + else + dev_dbg(&chip->client->dev, "%s\n", __func__); +} + +static int sbs_update_presence(struct sbs_info *chip, bool is_present) +{ + struct i2c_client *client = chip->client; + int retries = chip->i2c_retry_count; + s32 ret = 0; + u8 version; + + if (chip->is_present == is_present) + return 0; + + if (!is_present) { + chip->is_present = false; + /* Disable PEC when no device is present */ + client->flags &= ~I2C_CLIENT_PEC; + return 0; + } + + /* Check if device supports packet error checking and use it */ + while (retries > 0) { + ret = i2c_smbus_read_word_data(client, REG_ADDR_SPEC_INFO); + if (ret >= 0) + break; + + /* + * Some batteries trigger the detection pin before the + * I2C bus is properly connected. This works around the + * issue. + */ + msleep(100); + + retries--; + } + + if (ret < 0) { + dev_dbg(&client->dev, "failed to read spec info: %d\n", ret); + + /* fallback to old behaviour */ + client->flags &= ~I2C_CLIENT_PEC; + chip->is_present = true; + + return ret; + } + + version = (ret & SPEC_INFO_VERSION_MASK) >> SPEC_INFO_VERSION_SHIFT; + + if (version == SBS_VERSION_1_1_WITH_PEC) + client->flags |= I2C_CLIENT_PEC; + else + client->flags &= ~I2C_CLIENT_PEC; + + if (of_device_is_compatible(client->dev.parent->of_node, "google,cros-ec-i2c-tunnel") + && client->flags & I2C_CLIENT_PEC) { + dev_info(&client->dev, "Disabling PEC because of broken Cros-EC implementation\n"); + client->flags &= ~I2C_CLIENT_PEC; + } + + dev_dbg(&client->dev, "PEC: %s\n", (client->flags & I2C_CLIENT_PEC) ? + "enabled" : "disabled"); + + if (!chip->is_present && is_present && !chip->charger_broadcasts) + sbs_disable_charger_broadcasts(chip); + + chip->is_present = true; + + return 0; +} + +static int sbs_read_word_data(struct i2c_client *client, u8 address) +{ + struct sbs_info *chip = i2c_get_clientdata(client); + int retries = chip->i2c_retry_count; + s32 ret = 0; + + while (retries > 0) { + ret = i2c_smbus_read_word_data(client, address); + if (ret >= 0) + break; + retries--; + } + + if (ret < 0) { + dev_dbg(&client->dev, + "%s: i2c read at address 0x%x failed\n", + __func__, address); + return ret; + } + + return ret; +} + +static int sbs_read_string_data_fallback(struct i2c_client *client, u8 address, char *values) +{ + struct sbs_info *chip = i2c_get_clientdata(client); + s32 ret = 0, block_length = 0; + int retries_length, retries_block; + u8 block_buffer[I2C_SMBUS_BLOCK_MAX + 1]; + + retries_length = chip->i2c_retry_count; + retries_block = chip->i2c_retry_count; + + dev_warn_once(&client->dev, "I2C adapter does not support I2C_FUNC_SMBUS_READ_BLOCK_DATA.\n" + "Fallback method does not support PEC.\n"); + + /* Adapter needs to support these two functions */ + if (!i2c_check_functionality(client->adapter, + I2C_FUNC_SMBUS_BYTE_DATA | + I2C_FUNC_SMBUS_I2C_BLOCK)){ + return -ENODEV; + } + + /* Get the length of block data */ + while (retries_length > 0) { + ret = i2c_smbus_read_byte_data(client, address); + if (ret >= 0) + break; + retries_length--; + } + + if (ret < 0) { + dev_dbg(&client->dev, + "%s: i2c read at address 0x%x failed\n", + __func__, address); + return ret; + } + + /* block_length does not include NULL terminator */ + block_length = ret; + if (block_length > I2C_SMBUS_BLOCK_MAX) { + dev_err(&client->dev, + "%s: Returned block_length is longer than 0x%x\n", + __func__, I2C_SMBUS_BLOCK_MAX); + return -EINVAL; + } + + /* Get the block data */ + while (retries_block > 0) { + ret = i2c_smbus_read_i2c_block_data( + client, address, + block_length + 1, block_buffer); + if (ret >= 0) + break; + retries_block--; + } + + if (ret < 0) { + dev_dbg(&client->dev, + "%s: i2c read at address 0x%x failed\n", + __func__, address); + return ret; + } + + /* block_buffer[0] == block_length */ + memcpy(values, block_buffer + 1, block_length); + values[block_length] = '\0'; + + return ret; +} + +static int sbs_read_string_data(struct i2c_client *client, u8 address, char *values) +{ + struct sbs_info *chip = i2c_get_clientdata(client); + int retries = chip->i2c_retry_count; + int ret = 0; + + if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_READ_BLOCK_DATA)) { + bool pec = client->flags & I2C_CLIENT_PEC; + client->flags &= ~I2C_CLIENT_PEC; + ret = sbs_read_string_data_fallback(client, address, values); + if (pec) + client->flags |= I2C_CLIENT_PEC; + return ret; + } + + while (retries > 0) { + ret = i2c_smbus_read_block_data(client, address, values); + if (ret >= 0) + break; + retries--; + } + + if (ret < 0) { + dev_dbg(&client->dev, "failed to read block 0x%x: %d\n", address, ret); + return ret; + } + + /* add string termination */ + values[ret] = '\0'; + return ret; +} + +static int sbs_write_word_data(struct i2c_client *client, u8 address, + u16 value) +{ + struct sbs_info *chip = i2c_get_clientdata(client); + int retries = chip->i2c_retry_count; + s32 ret = 0; + + while (retries > 0) { + ret = i2c_smbus_write_word_data(client, address, value); + if (ret >= 0) + break; + retries--; + } + + if (ret < 0) { + dev_dbg(&client->dev, + "%s: i2c write to address 0x%x failed\n", + __func__, address); + return ret; + } + + return 0; +} + +static int sbs_status_correct(struct i2c_client *client, int *intval) +{ + int ret; + + ret = sbs_read_word_data(client, sbs_data[REG_CURRENT_NOW].addr); + if (ret < 0) + return ret; + + ret = (s16)ret; + + /* Not drawing current -> not charging (i.e. idle) */ + if (*intval != POWER_SUPPLY_STATUS_FULL && ret == 0) + *intval = POWER_SUPPLY_STATUS_NOT_CHARGING; + + if (*intval == POWER_SUPPLY_STATUS_FULL) { + /* Drawing or providing current when full */ + if (ret > 0) + *intval = POWER_SUPPLY_STATUS_CHARGING; + else if (ret < 0) + *intval = POWER_SUPPLY_STATUS_DISCHARGING; + } + + return 0; +} + +static bool sbs_bat_needs_calibration(struct i2c_client *client) +{ + int ret; + + ret = sbs_read_word_data(client, sbs_data[REG_BATTERY_MODE].addr); + if (ret < 0) + return false; + + return !!(ret & BIT(7)); +} + +static int sbs_get_ti_battery_presence_and_health( + struct i2c_client *client, enum power_supply_property psp, + union power_supply_propval *val) +{ + s32 ret; + + /* + * Write to ManufacturerAccess with ManufacturerAccess command + * and then read the status. + */ + ret = sbs_write_word_data(client, sbs_data[REG_MANUFACTURER_DATA].addr, + MANUFACTURER_ACCESS_STATUS); + if (ret < 0) { + if (psp == POWER_SUPPLY_PROP_PRESENT) + val->intval = 0; /* battery removed */ + return ret; + } + + ret = sbs_read_word_data(client, sbs_data[REG_MANUFACTURER_DATA].addr); + if (ret < 0) { + if (psp == POWER_SUPPLY_PROP_PRESENT) + val->intval = 0; /* battery removed */ + return ret; + } + + if (ret < sbs_data[REG_MANUFACTURER_DATA].min_value || + ret > sbs_data[REG_MANUFACTURER_DATA].max_value) { + val->intval = 0; + return 0; + } + + /* Mask the upper nibble of 2nd byte and + * lower byte of response then + * shift the result by 8 to get status*/ + ret &= 0x0F00; + ret >>= 8; + if (psp == POWER_SUPPLY_PROP_PRESENT) { + if (ret == 0x0F) + /* battery removed */ + val->intval = 0; + else + val->intval = 1; + } else if (psp == POWER_SUPPLY_PROP_HEALTH) { + if (ret == 0x09) + val->intval = POWER_SUPPLY_HEALTH_UNSPEC_FAILURE; + else if (ret == 0x0B) + val->intval = POWER_SUPPLY_HEALTH_OVERHEAT; + else if (ret == 0x0C) + val->intval = POWER_SUPPLY_HEALTH_DEAD; + else if (sbs_bat_needs_calibration(client)) + val->intval = POWER_SUPPLY_HEALTH_CALIBRATION_REQUIRED; + else + val->intval = POWER_SUPPLY_HEALTH_GOOD; + } + + return 0; +} + +static int sbs_get_battery_presence_and_health( + struct i2c_client *client, enum power_supply_property psp, + union power_supply_propval *val) +{ + struct sbs_info *chip = i2c_get_clientdata(client); + int ret; + + if (chip->flags & SBS_FLAGS_TI_BQ20ZX5) + return sbs_get_ti_battery_presence_and_health(client, psp, val); + + /* Dummy command; if it succeeds, battery is present. */ + ret = sbs_read_word_data(client, sbs_data[REG_STATUS].addr); + + if (ret < 0) { /* battery not present*/ + if (psp == POWER_SUPPLY_PROP_PRESENT) { + val->intval = 0; + return 0; + } + return ret; + } + + if (psp == POWER_SUPPLY_PROP_PRESENT) + val->intval = 1; /* battery present */ + else { /* POWER_SUPPLY_PROP_HEALTH */ + if (sbs_bat_needs_calibration(client)) { + val->intval = POWER_SUPPLY_HEALTH_CALIBRATION_REQUIRED; + } else { + /* SBS spec doesn't have a general health command. */ + val->intval = POWER_SUPPLY_HEALTH_UNKNOWN; + } + } + + return 0; +} + +static int sbs_get_battery_property(struct i2c_client *client, + int reg_offset, enum power_supply_property psp, + union power_supply_propval *val) +{ + struct sbs_info *chip = i2c_get_clientdata(client); + s32 ret; + + ret = sbs_read_word_data(client, sbs_data[reg_offset].addr); + if (ret < 0) + return ret; + + /* returned values are 16 bit */ + if (sbs_data[reg_offset].min_value < 0) + ret = (s16)ret; + + if (ret >= sbs_data[reg_offset].min_value && + ret <= sbs_data[reg_offset].max_value) { + val->intval = ret; + if (psp == POWER_SUPPLY_PROP_CAPACITY_LEVEL) { + if (!(ret & BATTERY_INITIALIZED)) + val->intval = + POWER_SUPPLY_CAPACITY_LEVEL_UNKNOWN; + else if (ret & BATTERY_FULL_CHARGED) + val->intval = + POWER_SUPPLY_CAPACITY_LEVEL_FULL; + else if (ret & BATTERY_FULL_DISCHARGED) + val->intval = + POWER_SUPPLY_CAPACITY_LEVEL_CRITICAL; + else + val->intval = + POWER_SUPPLY_CAPACITY_LEVEL_NORMAL; + return 0; + } else if (psp != POWER_SUPPLY_PROP_STATUS) { + return 0; + } + + if (ret & BATTERY_FULL_CHARGED) + val->intval = POWER_SUPPLY_STATUS_FULL; + else if (ret & BATTERY_DISCHARGING) + val->intval = POWER_SUPPLY_STATUS_DISCHARGING; + else + val->intval = POWER_SUPPLY_STATUS_CHARGING; + + sbs_status_correct(client, &val->intval); + + if (chip->poll_time == 0) + chip->last_state = val->intval; + else if (chip->last_state != val->intval) { + cancel_delayed_work_sync(&chip->work); + power_supply_changed(chip->power_supply); + chip->poll_time = 0; + } + } else { + if (psp == POWER_SUPPLY_PROP_STATUS) + val->intval = POWER_SUPPLY_STATUS_UNKNOWN; + else if (psp == POWER_SUPPLY_PROP_CAPACITY) + /* sbs spec says that this can be >100 % + * even if max value is 100 % + */ + val->intval = min(ret, 100); + else + val->intval = 0; + } + + return 0; +} + +static int sbs_get_battery_string_property(struct i2c_client *client, + int reg_offset, enum power_supply_property psp, char *val) +{ + s32 ret; + + ret = sbs_read_string_data(client, sbs_data[reg_offset].addr, val); + + if (ret < 0) + return ret; + + return 0; +} + +static void sbs_unit_adjustment(struct i2c_client *client, + enum power_supply_property psp, union power_supply_propval *val) +{ +#define BASE_UNIT_CONVERSION 1000 +#define BATTERY_MODE_CAP_MULT_WATT (10 * BASE_UNIT_CONVERSION) +#define TIME_UNIT_CONVERSION 60 +#define TEMP_KELVIN_TO_CELSIUS 2731 + switch (psp) { + case POWER_SUPPLY_PROP_ENERGY_NOW: + case POWER_SUPPLY_PROP_ENERGY_FULL: + case POWER_SUPPLY_PROP_ENERGY_FULL_DESIGN: + /* sbs provides energy in units of 10mWh. + * Convert to µWh + */ + val->intval *= BATTERY_MODE_CAP_MULT_WATT; + break; + + case POWER_SUPPLY_PROP_VOLTAGE_NOW: + case POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN: + case POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN: + case POWER_SUPPLY_PROP_CURRENT_NOW: + case POWER_SUPPLY_PROP_CURRENT_AVG: + case POWER_SUPPLY_PROP_CHARGE_NOW: + case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX: + case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX: + case POWER_SUPPLY_PROP_CHARGE_FULL: + case POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN: + val->intval *= BASE_UNIT_CONVERSION; + break; + + case POWER_SUPPLY_PROP_TEMP: + /* sbs provides battery temperature in 0.1K + * so convert it to 0.1°C + */ + val->intval -= TEMP_KELVIN_TO_CELSIUS; + break; + + case POWER_SUPPLY_PROP_TIME_TO_EMPTY_AVG: + case POWER_SUPPLY_PROP_TIME_TO_FULL_AVG: + /* sbs provides time to empty and time to full in minutes. + * Convert to seconds + */ + val->intval *= TIME_UNIT_CONVERSION; + break; + + default: + dev_dbg(&client->dev, + "%s: no need for unit conversion %d\n", __func__, psp); + } +} + +static enum sbs_capacity_mode sbs_set_capacity_mode(struct i2c_client *client, + enum sbs_capacity_mode mode) +{ + int ret, original_val; + + original_val = sbs_read_word_data(client, BATTERY_MODE_OFFSET); + if (original_val < 0) + return original_val; + + if ((original_val & BATTERY_MODE_CAPACITY_MASK) == mode) + return mode; + + if (mode == CAPACITY_MODE_AMPS) + ret = original_val & ~BATTERY_MODE_CAPACITY_MASK; + else + ret = original_val | BATTERY_MODE_CAPACITY_MASK; + + ret = sbs_write_word_data(client, BATTERY_MODE_OFFSET, ret); + if (ret < 0) + return ret; + + usleep_range(1000, 2000); + + return original_val & BATTERY_MODE_CAPACITY_MASK; +} + +static int sbs_get_battery_capacity(struct i2c_client *client, + int reg_offset, enum power_supply_property psp, + union power_supply_propval *val) +{ + s32 ret; + enum sbs_capacity_mode mode = CAPACITY_MODE_WATTS; + + if (power_supply_is_amp_property(psp)) + mode = CAPACITY_MODE_AMPS; + + mode = sbs_set_capacity_mode(client, mode); + if ((int)mode < 0) + return mode; + + ret = sbs_read_word_data(client, sbs_data[reg_offset].addr); + if (ret < 0) + return ret; + + val->intval = ret; + + ret = sbs_set_capacity_mode(client, mode); + if (ret < 0) + return ret; + + return 0; +} + +static char sbs_serial[5]; +static int sbs_get_battery_serial_number(struct i2c_client *client, + union power_supply_propval *val) +{ + int ret; + + ret = sbs_read_word_data(client, sbs_data[REG_SERIAL_NUMBER].addr); + if (ret < 0) + return ret; + + sprintf(sbs_serial, "%04x", ret); + val->strval = sbs_serial; + + return 0; +} + +static int sbs_get_property_index(struct i2c_client *client, + enum power_supply_property psp) +{ + int count; + for (count = 0; count < ARRAY_SIZE(sbs_data); count++) + if (psp == sbs_data[count].psp) + return count; + + dev_warn(&client->dev, + "%s: Invalid Property - %d\n", __func__, psp); + + return -EINVAL; +} + +static int sbs_get_chemistry(struct i2c_client *client, + union power_supply_propval *val) +{ + enum power_supply_property psp = POWER_SUPPLY_PROP_TECHNOLOGY; + int ret; + + ret = sbs_get_property_index(client, psp); + if (ret < 0) + return ret; + + ret = sbs_get_battery_string_property(client, ret, psp, + chemistry); + if (ret < 0) + return ret; + + if (!strncasecmp(chemistry, "LION", 4)) + val->intval = POWER_SUPPLY_TECHNOLOGY_LION; + else if (!strncasecmp(chemistry, "LiP", 3)) + val->intval = POWER_SUPPLY_TECHNOLOGY_LIPO; + else if (!strncasecmp(chemistry, "NiCd", 4)) + val->intval = POWER_SUPPLY_TECHNOLOGY_NiCd; + else if (!strncasecmp(chemistry, "NiMH", 4)) + val->intval = POWER_SUPPLY_TECHNOLOGY_NiMH; + else + val->intval = POWER_SUPPLY_TECHNOLOGY_UNKNOWN; + + if (val->intval == POWER_SUPPLY_TECHNOLOGY_UNKNOWN) + dev_warn(&client->dev, "Unknown chemistry: %s\n", chemistry); + + return 0; +} + +static int sbs_get_battery_manufacture_date(struct i2c_client *client, + enum power_supply_property psp, + union power_supply_propval *val) +{ + int ret; + u16 day, month, year; + + ret = sbs_read_word_data(client, REG_ADDR_MANUFACTURE_DATE); + if (ret < 0) + return ret; + + day = ret & GENMASK(4, 0); + month = (ret & GENMASK(8, 5)) >> 5; + year = ((ret & GENMASK(15, 9)) >> 9) + 1980; + + switch (psp) { + case POWER_SUPPLY_PROP_MANUFACTURE_YEAR: + val->intval = year; + break; + case POWER_SUPPLY_PROP_MANUFACTURE_MONTH: + val->intval = month; + break; + case POWER_SUPPLY_PROP_MANUFACTURE_DAY: + val->intval = day; + break; + default: + return -EINVAL; + } + + return 0; +} + +static int sbs_get_property(struct power_supply *psy, + enum power_supply_property psp, + union power_supply_propval *val) +{ + int ret = 0; + struct sbs_info *chip = power_supply_get_drvdata(psy); + struct i2c_client *client = chip->client; + + if (chip->gpio_detect) { + ret = gpiod_get_value_cansleep(chip->gpio_detect); + if (ret < 0) + return ret; + if (psp == POWER_SUPPLY_PROP_PRESENT) { + val->intval = ret; + sbs_update_presence(chip, ret); + return 0; + } + if (ret == 0) + return -ENODATA; + } + + switch (psp) { + case POWER_SUPPLY_PROP_PRESENT: + case POWER_SUPPLY_PROP_HEALTH: + ret = sbs_get_battery_presence_and_health(client, psp, val); + + /* this can only be true if no gpio is used */ + if (psp == POWER_SUPPLY_PROP_PRESENT) + return 0; + break; + + case POWER_SUPPLY_PROP_TECHNOLOGY: + ret = sbs_get_chemistry(client, val); + if (ret < 0) + break; + + goto done; /* don't trigger power_supply_changed()! */ + + case POWER_SUPPLY_PROP_ENERGY_NOW: + case POWER_SUPPLY_PROP_ENERGY_FULL: + case POWER_SUPPLY_PROP_ENERGY_FULL_DESIGN: + case POWER_SUPPLY_PROP_CHARGE_NOW: + case POWER_SUPPLY_PROP_CHARGE_FULL: + case POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN: + ret = sbs_get_property_index(client, psp); + if (ret < 0) + break; + + /* sbs_get_battery_capacity() will change the battery mode + * temporarily to read the requested attribute. Ensure we stay + * in the desired mode for the duration of the attribute read. + */ + mutex_lock(&chip->mode_lock); + ret = sbs_get_battery_capacity(client, ret, psp, val); + mutex_unlock(&chip->mode_lock); + break; + + case POWER_SUPPLY_PROP_SERIAL_NUMBER: + ret = sbs_get_battery_serial_number(client, val); + break; + + case POWER_SUPPLY_PROP_STATUS: + case POWER_SUPPLY_PROP_CAPACITY_LEVEL: + case POWER_SUPPLY_PROP_CYCLE_COUNT: + case POWER_SUPPLY_PROP_VOLTAGE_NOW: + case POWER_SUPPLY_PROP_CURRENT_NOW: + case POWER_SUPPLY_PROP_CURRENT_AVG: + case POWER_SUPPLY_PROP_TEMP: + case POWER_SUPPLY_PROP_TIME_TO_EMPTY_AVG: + case POWER_SUPPLY_PROP_TIME_TO_FULL_AVG: + case POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN: + case POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN: + case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX: + case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX: + case POWER_SUPPLY_PROP_CAPACITY: + case POWER_SUPPLY_PROP_CAPACITY_ERROR_MARGIN: + ret = sbs_get_property_index(client, psp); + if (ret < 0) + break; + + ret = sbs_get_battery_property(client, ret, psp, val); + break; + + case POWER_SUPPLY_PROP_MODEL_NAME: + ret = sbs_get_property_index(client, psp); + if (ret < 0) + break; + + ret = sbs_get_battery_string_property(client, ret, psp, + model_name); + val->strval = model_name; + break; + + case POWER_SUPPLY_PROP_MANUFACTURER: + ret = sbs_get_property_index(client, psp); + if (ret < 0) + break; + + ret = sbs_get_battery_string_property(client, ret, psp, + manufacturer); + val->strval = manufacturer; + break; + + case POWER_SUPPLY_PROP_MANUFACTURE_YEAR: + case POWER_SUPPLY_PROP_MANUFACTURE_MONTH: + case POWER_SUPPLY_PROP_MANUFACTURE_DAY: + ret = sbs_get_battery_manufacture_date(client, psp, val); + break; + + default: + dev_err(&client->dev, + "%s: INVALID property\n", __func__); + return -EINVAL; + } + + if (!chip->gpio_detect && chip->is_present != (ret >= 0)) { + bool old_present = chip->is_present; + union power_supply_propval val; + int err = sbs_get_battery_presence_and_health( + client, POWER_SUPPLY_PROP_PRESENT, &val); + + sbs_update_presence(chip, !err && val.intval); + + if (old_present != chip->is_present) + power_supply_changed(chip->power_supply); + } + +done: + if (!ret) { + /* Convert units to match requirements for power supply class */ + sbs_unit_adjustment(client, psp, val); + dev_dbg(&client->dev, + "%s: property = %d, value = %x\n", __func__, + psp, val->intval); + } else if (!chip->is_present) { + /* battery not present, so return NODATA for properties */ + ret = -ENODATA; + } + return ret; +} + +static void sbs_supply_changed(struct sbs_info *chip) +{ + struct power_supply *battery = chip->power_supply; + int ret; + + ret = gpiod_get_value_cansleep(chip->gpio_detect); + if (ret < 0) + return; + sbs_update_presence(chip, ret); + power_supply_changed(battery); +} + +static irqreturn_t sbs_irq(int irq, void *devid) +{ + sbs_supply_changed(devid); + return IRQ_HANDLED; +} + +static void sbs_alert(struct i2c_client *client, enum i2c_alert_protocol prot, + unsigned int data) +{ + sbs_supply_changed(i2c_get_clientdata(client)); +} + +static void sbs_external_power_changed(struct power_supply *psy) +{ + struct sbs_info *chip = power_supply_get_drvdata(psy); + + /* cancel outstanding work */ + cancel_delayed_work_sync(&chip->work); + + schedule_delayed_work(&chip->work, HZ); + chip->poll_time = chip->poll_retry_count; +} + +static void sbs_delayed_work(struct work_struct *work) +{ + struct sbs_info *chip; + s32 ret; + + chip = container_of(work, struct sbs_info, work.work); + + ret = sbs_read_word_data(chip->client, sbs_data[REG_STATUS].addr); + /* if the read failed, give up on this work */ + if (ret < 0) { + chip->poll_time = 0; + return; + } + + if (ret & BATTERY_FULL_CHARGED) + ret = POWER_SUPPLY_STATUS_FULL; + else if (ret & BATTERY_DISCHARGING) + ret = POWER_SUPPLY_STATUS_DISCHARGING; + else + ret = POWER_SUPPLY_STATUS_CHARGING; + + sbs_status_correct(chip->client, &ret); + + if (chip->last_state != ret) { + chip->poll_time = 0; + power_supply_changed(chip->power_supply); + return; + } + if (chip->poll_time > 0) { + schedule_delayed_work(&chip->work, HZ); + chip->poll_time--; + return; + } +} + +static const struct power_supply_desc sbs_default_desc = { + .type = POWER_SUPPLY_TYPE_BATTERY, + .properties = sbs_properties, + .num_properties = ARRAY_SIZE(sbs_properties), + .get_property = sbs_get_property, + .external_power_changed = sbs_external_power_changed, +}; + +static int sbs_probe(struct i2c_client *client) +{ + struct sbs_info *chip; + struct power_supply_desc *sbs_desc; + struct sbs_platform_data *pdata = client->dev.platform_data; + struct power_supply_config psy_cfg = {}; + int rc; + int irq; + + sbs_desc = devm_kmemdup(&client->dev, &sbs_default_desc, + sizeof(*sbs_desc), GFP_KERNEL); + if (!sbs_desc) + return -ENOMEM; + + sbs_desc->name = devm_kasprintf(&client->dev, GFP_KERNEL, "sbs-%s", + dev_name(&client->dev)); + if (!sbs_desc->name) + return -ENOMEM; + + chip = devm_kzalloc(&client->dev, sizeof(struct sbs_info), GFP_KERNEL); + if (!chip) + return -ENOMEM; + + chip->flags = (u32)(uintptr_t)device_get_match_data(&client->dev); + chip->client = client; + psy_cfg.of_node = client->dev.of_node; + psy_cfg.drv_data = chip; + chip->last_state = POWER_SUPPLY_STATUS_UNKNOWN; + mutex_init(&chip->mode_lock); + + /* use pdata if available, fall back to DT properties, + * or hardcoded defaults if not + */ + rc = device_property_read_u32(&client->dev, "sbs,i2c-retry-count", + &chip->i2c_retry_count); + if (rc) + chip->i2c_retry_count = 0; + + rc = device_property_read_u32(&client->dev, "sbs,poll-retry-count", + &chip->poll_retry_count); + if (rc) + chip->poll_retry_count = 0; + + if (pdata) { + chip->poll_retry_count = pdata->poll_retry_count; + chip->i2c_retry_count = pdata->i2c_retry_count; + } + chip->i2c_retry_count = chip->i2c_retry_count + 1; + + chip->charger_broadcasts = !device_property_read_bool(&client->dev, + "sbs,disable-charger-broadcasts"); + + chip->gpio_detect = devm_gpiod_get_optional(&client->dev, + "sbs,battery-detect", GPIOD_IN); + if (IS_ERR(chip->gpio_detect)) { + dev_err(&client->dev, "Failed to get gpio: %ld\n", + PTR_ERR(chip->gpio_detect)); + return PTR_ERR(chip->gpio_detect); + } + + i2c_set_clientdata(client, chip); + + if (!chip->gpio_detect) + goto skip_gpio; + + irq = gpiod_to_irq(chip->gpio_detect); + if (irq <= 0) { + dev_warn(&client->dev, "Failed to get gpio as irq: %d\n", irq); + goto skip_gpio; + } + + rc = devm_request_threaded_irq(&client->dev, irq, NULL, sbs_irq, + IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING | IRQF_ONESHOT, + dev_name(&client->dev), chip); + if (rc) { + dev_warn(&client->dev, "Failed to request irq: %d\n", rc); + goto skip_gpio; + } + +skip_gpio: + /* + * Before we register, we might need to make sure we can actually talk + * to the battery. + */ + if (!(force_load || chip->gpio_detect)) { + union power_supply_propval val; + + rc = sbs_get_battery_presence_and_health( + client, POWER_SUPPLY_PROP_PRESENT, &val); + if (rc < 0 || !val.intval) { + dev_err(&client->dev, "Failed to get present status\n"); + rc = -ENODEV; + goto exit_psupply; + } + } + + INIT_DELAYED_WORK(&chip->work, sbs_delayed_work); + + chip->power_supply = devm_power_supply_register(&client->dev, sbs_desc, + &psy_cfg); + if (IS_ERR(chip->power_supply)) { + dev_err(&client->dev, + "%s: Failed to register power supply\n", __func__); + rc = PTR_ERR(chip->power_supply); + goto exit_psupply; + } + + dev_info(&client->dev, + "%s: battery gas gauge device registered\n", client->name); + + return 0; + +exit_psupply: + return rc; +} + +static int sbs_remove(struct i2c_client *client) +{ + struct sbs_info *chip = i2c_get_clientdata(client); + + cancel_delayed_work_sync(&chip->work); + + return 0; +} + +#if defined CONFIG_PM_SLEEP + +static int sbs_suspend(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct sbs_info *chip = i2c_get_clientdata(client); + int ret; + + if (chip->poll_time > 0) + cancel_delayed_work_sync(&chip->work); + + if (chip->flags & SBS_FLAGS_TI_BQ20ZX5) { + /* Write to manufacturer access with sleep command. */ + ret = sbs_write_word_data(client, + sbs_data[REG_MANUFACTURER_DATA].addr, + MANUFACTURER_ACCESS_SLEEP); + if (chip->is_present && ret < 0) + return ret; + } + + return 0; +} + +static SIMPLE_DEV_PM_OPS(sbs_pm_ops, sbs_suspend, NULL); +#define SBS_PM_OPS (&sbs_pm_ops) + +#else +#define SBS_PM_OPS NULL +#endif + +static const struct i2c_device_id sbs_id[] = { + { "bq20z65", 0 }, + { "bq20z75", 0 }, + { "sbs-battery", 1 }, + {} +}; +MODULE_DEVICE_TABLE(i2c, sbs_id); + +static const struct of_device_id sbs_dt_ids[] = { + { .compatible = "sbs,sbs-battery" }, + { + .compatible = "ti,bq20z65", + .data = (void *)SBS_FLAGS_TI_BQ20ZX5, + }, + { + .compatible = "ti,bq20z75", + .data = (void *)SBS_FLAGS_TI_BQ20ZX5, + }, + { } +}; +MODULE_DEVICE_TABLE(of, sbs_dt_ids); + +static struct i2c_driver sbs_battery_driver = { + .probe_new = sbs_probe, + .remove = sbs_remove, + .alert = sbs_alert, + .id_table = sbs_id, + .driver = { + .name = "sbs-battery", + .of_match_table = sbs_dt_ids, + .pm = SBS_PM_OPS, + }, +}; +module_i2c_driver(sbs_battery_driver); + +MODULE_DESCRIPTION("SBS battery monitor driver"); +MODULE_LICENSE("GPL"); + +module_param(force_load, bool, 0444); +MODULE_PARM_DESC(force_load, + "Attempt to load the driver even if no battery is connected"); |