summaryrefslogtreecommitdiffstats
path: root/drivers/power
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/power')
-rw-r--r--drivers/power/Kconfig3
-rw-r--r--drivers/power/Makefile3
-rw-r--r--drivers/power/reset/Kconfig288
-rw-r--r--drivers/power/reset/Makefile35
-rw-r--r--drivers/power/reset/arm-versatile-reboot.c160
-rw-r--r--drivers/power/reset/as3722-poweroff.c87
-rw-r--r--drivers/power/reset/at91-poweroff.c239
-rw-r--r--drivers/power/reset/at91-reset.c271
-rw-r--r--drivers/power/reset/at91-sama5d2_shdwc.c423
-rw-r--r--drivers/power/reset/axxia-reset.c88
-rw-r--r--drivers/power/reset/brcm-kona-reset.c73
-rw-r--r--drivers/power/reset/brcmstb-reboot.c156
-rw-r--r--drivers/power/reset/gemini-poweroff.c175
-rw-r--r--drivers/power/reset/gpio-poweroff.c109
-rw-r--r--drivers/power/reset/gpio-restart.c142
-rw-r--r--drivers/power/reset/hisi-reboot.c79
-rw-r--r--drivers/power/reset/keystone-reset.c172
-rw-r--r--drivers/power/reset/linkstation-poweroff.c136
-rw-r--r--drivers/power/reset/ltc2952-poweroff.c313
-rw-r--r--drivers/power/reset/msm-poweroff.c71
-rw-r--r--drivers/power/reset/mt6323-poweroff.c100
-rw-r--r--drivers/power/reset/nvmem-reboot-mode.c76
-rw-r--r--drivers/power/reset/ocelot-reset.c131
-rw-r--r--drivers/power/reset/oxnas-restart.c233
-rw-r--r--drivers/power/reset/piix4-poweroff.c109
-rw-r--r--drivers/power/reset/qcom-pon.c99
-rw-r--r--drivers/power/reset/qnap-poweroff.c136
-rw-r--r--drivers/power/reset/reboot-mode.c195
-rw-r--r--drivers/power/reset/restart-poweroff.c62
-rw-r--r--drivers/power/reset/rmobile-reset.c88
-rw-r--r--drivers/power/reset/sc27xx-poweroff.c79
-rw-r--r--drivers/power/reset/st-poweroff.c112
-rw-r--r--drivers/power/reset/syscon-poweroff.c106
-rw-r--r--drivers/power/reset/syscon-reboot-mode.c86
-rw-r--r--drivers/power/reset/syscon-reboot.c100
-rw-r--r--drivers/power/reset/vexpress-poweroff.c149
-rw-r--r--drivers/power/reset/xgene-reboot.c95
-rw-r--r--drivers/power/reset/zx-reboot.c86
-rw-r--r--drivers/power/supply/88pm860x_battery.c1016
-rw-r--r--drivers/power/supply/88pm860x_charger.c757
-rw-r--r--drivers/power/supply/Kconfig779
-rw-r--r--drivers/power/supply/Makefile100
-rw-r--r--drivers/power/supply/ab8500_bmdata.c544
-rw-r--r--drivers/power/supply/ab8500_btemp.c1172
-rw-r--r--drivers/power/supply/ab8500_charger.c3711
-rw-r--r--drivers/power/supply/ab8500_fg.c3281
-rw-r--r--drivers/power/supply/abx500_chargalg.c2104
-rw-r--r--drivers/power/supply/act8945a_charger.c662
-rw-r--r--drivers/power/supply/adp5061.c744
-rw-r--r--drivers/power/supply/apm_power.c376
-rw-r--r--drivers/power/supply/axp20x_ac_power.c426
-rw-r--r--drivers/power/supply/axp20x_battery.c647
-rw-r--r--drivers/power/supply/axp20x_usb_power.c695
-rw-r--r--drivers/power/supply/axp288_charger.c939
-rw-r--r--drivers/power/supply/axp288_fuel_gauge.c894
-rw-r--r--drivers/power/supply/bd70528-charger.c710
-rw-r--r--drivers/power/supply/bd99954-charger.c1142
-rw-r--r--drivers/power/supply/bd99954-charger.h1075
-rw-r--r--drivers/power/supply/bq2415x_charger.c1793
-rw-r--r--drivers/power/supply/bq24190_charger.c1988
-rw-r--r--drivers/power/supply/bq24257_charger.c1180
-rw-r--r--drivers/power/supply/bq24735-charger.c521
-rw-r--r--drivers/power/supply/bq2515x_charger.c1169
-rw-r--r--drivers/power/supply/bq25890_charger.c1110
-rw-r--r--drivers/power/supply/bq25980_charger.c1298
-rw-r--r--drivers/power/supply/bq25980_charger.h178
-rw-r--r--drivers/power/supply/bq27xxx_battery.c2090
-rw-r--r--drivers/power/supply/bq27xxx_battery_hdq.c128
-rw-r--r--drivers/power/supply/bq27xxx_battery_i2c.c307
-rw-r--r--drivers/power/supply/charger-manager.c1773
-rw-r--r--drivers/power/supply/collie_battery.c418
-rw-r--r--drivers/power/supply/cpcap-battery.c957
-rw-r--r--drivers/power/supply/cpcap-charger.c927
-rw-r--r--drivers/power/supply/cros_usbpd-charger.c726
-rw-r--r--drivers/power/supply/cw2015_battery.c752
-rw-r--r--drivers/power/supply/da9030_battery.c583
-rw-r--r--drivers/power/supply/da9052-battery.c665
-rw-r--r--drivers/power/supply/da9150-charger.c691
-rw-r--r--drivers/power/supply/da9150-fg.c575
-rw-r--r--drivers/power/supply/ds2760_battery.c816
-rw-r--r--drivers/power/supply/ds2780_battery.c790
-rw-r--r--drivers/power/supply/ds2781_battery.c794
-rw-r--r--drivers/power/supply/ds2782_battery.c471
-rw-r--r--drivers/power/supply/generic-adc-battery.c429
-rw-r--r--drivers/power/supply/goldfish_battery.c290
-rw-r--r--drivers/power/supply/gpio-charger.c400
-rw-r--r--drivers/power/supply/ingenic-battery.c190
-rw-r--r--drivers/power/supply/ipaq_micro_battery.c313
-rw-r--r--drivers/power/supply/isp1704_charger.c514
-rw-r--r--drivers/power/supply/lego_ev3_battery.c232
-rw-r--r--drivers/power/supply/lp8727_charger.c627
-rw-r--r--drivers/power/supply/lp8788-charger.c741
-rw-r--r--drivers/power/supply/lt3651-charger.c207
-rw-r--r--drivers/power/supply/ltc2941-battery-gauge.c667
-rw-r--r--drivers/power/supply/max14577_charger.c648
-rw-r--r--drivers/power/supply/max14656_charger_detector.c335
-rw-r--r--drivers/power/supply/max17040_battery.c643
-rw-r--r--drivers/power/supply/max17042_battery.c1229
-rw-r--r--drivers/power/supply/max1721x_battery.c448
-rw-r--r--drivers/power/supply/max77650-charger.c376
-rw-r--r--drivers/power/supply/max77693_charger.c762
-rw-r--r--drivers/power/supply/max8903_charger.c445
-rw-r--r--drivers/power/supply/max8925_power.c594
-rw-r--r--drivers/power/supply/max8997_charger.c186
-rw-r--r--drivers/power/supply/max8998_charger.c208
-rw-r--r--drivers/power/supply/mp2629_charger.c669
-rw-r--r--drivers/power/supply/olpc_battery.c730
-rw-r--r--drivers/power/supply/pcf50633-charger.c473
-rw-r--r--drivers/power/supply/pda_power.c520
-rw-r--r--drivers/power/supply/pm2301_charger.c1250
-rw-r--r--drivers/power/supply/pm2301_charger.h492
-rw-r--r--drivers/power/supply/pmu_battery.c223
-rw-r--r--drivers/power/supply/power_supply.h41
-rw-r--r--drivers/power/supply/power_supply_core.c1403
-rw-r--r--drivers/power/supply/power_supply_hwmon.c422
-rw-r--r--drivers/power/supply/power_supply_leds.c170
-rw-r--r--drivers/power/supply/power_supply_sysfs.c487
-rw-r--r--drivers/power/supply/qcom_smbb.c1034
-rw-r--r--drivers/power/supply/rn5t618_power.c556
-rw-r--r--drivers/power/supply/rt5033_battery.c186
-rw-r--r--drivers/power/supply/rt9455_charger.c1756
-rw-r--r--drivers/power/supply/rx51_battery.c283
-rw-r--r--drivers/power/supply/s3c_adc_battery.c461
-rw-r--r--drivers/power/supply/sbs-battery.c1267
-rw-r--r--drivers/power/supply/sbs-charger.c267
-rw-r--r--drivers/power/supply/sbs-manager.c442
-rw-r--r--drivers/power/supply/sc2731_charger.c541
-rw-r--r--drivers/power/supply/sc27xx_fuel_gauge.c1352
-rw-r--r--drivers/power/supply/smb347-charger.c1410
-rw-r--r--drivers/power/supply/test_power.c591
-rw-r--r--drivers/power/supply/tosa_battery.c466
-rw-r--r--drivers/power/supply/tps65090-charger.c360
-rw-r--r--drivers/power/supply/tps65217_charger.c286
-rw-r--r--drivers/power/supply/twl4030_charger.c1150
-rw-r--r--drivers/power/supply/twl4030_madc_battery.c278
-rw-r--r--drivers/power/supply/ucs1002_power.c692
-rw-r--r--drivers/power/supply/wilco-charger.c192
-rw-r--r--drivers/power/supply/wm831x_backup.c222
-rw-r--r--drivers/power/supply/wm831x_power.c742
-rw-r--r--drivers/power/supply/wm8350_power.c607
-rw-r--r--drivers/power/supply/wm97xx_battery.c283
-rw-r--r--drivers/power/supply/z2_battery.c326
142 files changed, 82653 insertions, 0 deletions
diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig
new file mode 100644
index 000000000..696bf77a7
--- /dev/null
+++ b/drivers/power/Kconfig
@@ -0,0 +1,3 @@
+# SPDX-License-Identifier: GPL-2.0-only
+source "drivers/power/reset/Kconfig"
+source "drivers/power/supply/Kconfig"
diff --git a/drivers/power/Makefile b/drivers/power/Makefile
new file mode 100644
index 000000000..effbf0377
--- /dev/null
+++ b/drivers/power/Makefile
@@ -0,0 +1,3 @@
+# SPDX-License-Identifier: GPL-2.0-only
+obj-$(CONFIG_POWER_RESET) += reset/
+obj-$(CONFIG_POWER_SUPPLY) += supply/
diff --git a/drivers/power/reset/Kconfig b/drivers/power/reset/Kconfig
new file mode 100644
index 000000000..d55b3727e
--- /dev/null
+++ b/drivers/power/reset/Kconfig
@@ -0,0 +1,288 @@
+# SPDX-License-Identifier: GPL-2.0-only
+menuconfig POWER_RESET
+ bool "Board level reset or power off"
+ help
+ Provides a number of drivers which either reset a complete board
+ or shut it down, by manipulating the main power supply on the board.
+
+ Say Y here to enable board reset and power off
+
+if POWER_RESET
+
+config POWER_RESET_AS3722
+ bool "ams AS3722 power-off driver"
+ depends on MFD_AS3722
+ help
+ This driver supports turning off board via a ams AS3722 power-off.
+
+config POWER_RESET_AT91_POWEROFF
+ tristate "Atmel AT91 poweroff driver"
+ depends on ARCH_AT91
+ default SOC_AT91SAM9 || SOC_SAMA5
+ help
+ This driver supports poweroff for Atmel AT91SAM9 and SAMA5
+ SoCs
+
+config POWER_RESET_AT91_RESET
+ tristate "Atmel AT91 reset driver"
+ depends on ARCH_AT91
+ default SOC_AT91SAM9 || SOC_SAM9X60 || SOC_SAMA5
+ help
+ This driver supports restart for Atmel AT91SAM9 and SAMA5
+ SoCs
+
+config POWER_RESET_AT91_SAMA5D2_SHDWC
+ tristate "Atmel AT91 SAMA5D2-Compatible shutdown controller driver"
+ depends on ARCH_AT91
+ default SOC_SAM9X60 || SOC_SAMA5
+ help
+ This driver supports the alternate shutdown controller for some Atmel
+ SAMA5 SoCs. It is present for example on SAMA5D2 SoC.
+
+config POWER_RESET_AXXIA
+ bool "LSI Axxia reset driver"
+ depends on ARCH_AXXIA
+ help
+ This driver supports restart for Axxia SoC.
+
+ Say Y if you have an Axxia family SoC.
+
+config POWER_RESET_BRCMKONA
+ bool "Broadcom Kona reset driver"
+ depends on ARM || COMPILE_TEST
+ default ARCH_BCM_MOBILE
+ help
+ This driver provides restart support for Broadcom Kona chips.
+
+ Say Y here if you have a Broadcom Kona-based board and you wish
+ to have restart support.
+
+config POWER_RESET_BRCMSTB
+ bool "Broadcom STB reset driver"
+ depends on ARM || ARM64 || MIPS || COMPILE_TEST
+ depends on MFD_SYSCON
+ default ARCH_BRCMSTB || BMIPS_GENERIC
+ help
+ This driver provides restart support for Broadcom STB boards.
+
+ Say Y here if you have a Broadcom STB board and you wish
+ to have restart support.
+
+config POWER_RESET_GEMINI_POWEROFF
+ bool "Cortina Gemini power-off driver"
+ depends on ARCH_GEMINI || COMPILE_TEST
+ depends on OF && HAS_IOMEM
+ default ARCH_GEMINI
+ help
+ This driver supports turning off the Cortina Gemini SoC.
+ Select this if you're building a kernel with Gemini SoC support.
+
+config POWER_RESET_GPIO
+ bool "GPIO power-off driver"
+ depends on OF_GPIO
+ help
+ This driver supports turning off your board via a GPIO line.
+ If your board needs a GPIO high/low to power down, say Y and
+ create a binding in your devicetree.
+
+config POWER_RESET_GPIO_RESTART
+ bool "GPIO restart driver"
+ depends on OF_GPIO
+ help
+ This driver supports restarting your board via a GPIO line.
+ If your board needs a GPIO high/low to restart, say Y and
+ create a binding in your devicetree.
+
+config POWER_RESET_HISI
+ bool "Hisilicon power-off driver"
+ depends on ARCH_HISI
+ help
+ Reboot support for Hisilicon boards.
+
+config POWER_RESET_LINKSTATION
+ tristate "Buffalo LinkStation power-off driver"
+ depends on ARCH_MVEBU || COMPILE_TEST
+ depends on OF_MDIO && PHYLIB
+ help
+ This driver supports turning off some Buffalo LinkStations by
+ setting an output pin at the ethernet PHY to the correct state.
+ It also makes the device compatible with the WoL function.
+
+ Say Y here if you have a Buffalo LinkStation LS421D/E.
+
+config POWER_RESET_MSM
+ bool "Qualcomm MSM power-off driver"
+ depends on ARCH_QCOM
+ help
+ Power off and restart support for Qualcomm boards.
+
+config POWER_RESET_QCOM_PON
+ tristate "Qualcomm power-on driver"
+ depends on ARCH_QCOM
+ depends on MFD_SPMI_PMIC
+ select REBOOT_MODE
+ help
+ Power On support for Qualcomm boards.
+ If you have a Qualcomm platform and need support for
+ power-on and reboot reason, Say Y.
+ If unsure, Say N.
+
+config POWER_RESET_OCELOT_RESET
+ bool "Microsemi Ocelot reset driver"
+ depends on MSCC_OCELOT || ARCH_SPARX5 || COMPILE_TEST
+ select MFD_SYSCON
+ help
+ This driver supports restart for Microsemi Ocelot SoC and similar.
+
+config POWER_RESET_OXNAS
+ bool "OXNAS SoC restart driver"
+ depends on ARCH_OXNAS
+ default MACH_OX820
+ help
+ Restart support for OXNAS/PLXTECH OX820 SoC.
+
+config POWER_RESET_PIIX4_POWEROFF
+ tristate "Intel PIIX4 power-off driver"
+ depends on PCI
+ depends on MIPS || COMPILE_TEST
+ help
+ This driver supports powering off a system using the Intel PIIX4
+ southbridge, for example the MIPS Malta development board. The
+ southbridge SOff state is entered in response to a request to
+ power off the system.
+
+config POWER_RESET_LTC2952
+ bool "LTC2952 PowerPath power-off driver"
+ depends on OF_GPIO
+ help
+ This driver supports an external powerdown trigger and board power
+ down via the LTC2952. Bindings are made in the device tree.
+
+config POWER_RESET_MT6323
+ bool "MediaTek MT6323 power-off driver"
+ depends on MFD_MT6397
+ help
+ The power-off driver is responsible for externally shutdown down
+ the power of a remote MediaTek SoC MT6323 is connected to through
+ controlling a tiny circuit BBPU inside MT6323 RTC.
+
+ Say Y if you have a board where MT6323 could be found.
+
+config POWER_RESET_QNAP
+ bool "QNAP power-off driver"
+ depends on OF_GPIO && PLAT_ORION
+ help
+ This driver supports turning off QNAP NAS devices by sending
+ commands to the microcontroller which controls the main power.
+
+ Say Y if you have a QNAP NAS.
+
+config POWER_RESET_RESTART
+ bool "Restart power-off driver"
+ help
+ Some boards don't actually have the ability to power off.
+ Instead they restart, and u-boot holds the SoC until the
+ user presses a key. u-boot then boots into Linux.
+
+config POWER_RESET_ST
+ bool "ST restart driver"
+ depends on ARCH_STI
+ help
+ Reset support for STMicroelectronics boards.
+
+config POWER_RESET_VERSATILE
+ bool "ARM Versatile family reboot driver"
+ depends on ARM
+ depends on MFD_SYSCON
+ depends on OF
+ help
+ Power off and restart support for ARM Versatile family of
+ reference boards.
+
+config POWER_RESET_VEXPRESS
+ bool "ARM Versatile Express power-off and reset driver"
+ depends on ARM || ARM64
+ depends on VEXPRESS_CONFIG=y
+ help
+ Power off and reset support for the ARM Ltd. Versatile
+ Express boards.
+
+config POWER_RESET_XGENE
+ bool "APM SoC X-Gene reset driver"
+ depends on ARM64
+ help
+ Reboot support for the APM SoC X-Gene Eval boards.
+
+config POWER_RESET_KEYSTONE
+ bool "Keystone reset driver"
+ depends on ARCH_KEYSTONE || COMPILE_TEST
+ depends on HAS_IOMEM
+ select MFD_SYSCON
+ help
+ Reboot support for the KEYSTONE SoCs.
+
+config POWER_RESET_SYSCON
+ bool "Generic SYSCON regmap reset driver"
+ depends on OF
+ depends on HAS_IOMEM
+ select MFD_SYSCON
+ help
+ Reboot support for generic SYSCON mapped register reset.
+
+config POWER_RESET_SYSCON_POWEROFF
+ bool "Generic SYSCON regmap poweroff driver"
+ depends on OF
+ depends on HAS_IOMEM
+ select MFD_SYSCON
+ help
+ Poweroff support for generic SYSCON mapped register poweroff.
+
+config POWER_RESET_RMOBILE
+ tristate "Renesas R-Mobile reset driver"
+ depends on ARCH_RMOBILE || COMPILE_TEST
+ depends on HAS_IOMEM
+ help
+ Reboot support for Renesas R-Mobile and SH-Mobile SoCs.
+
+config POWER_RESET_ZX
+ tristate "ZTE SoCs reset driver"
+ depends on ARCH_ZX || COMPILE_TEST
+ depends on HAS_IOMEM
+ help
+ Reboot support for ZTE SoCs.
+
+config REBOOT_MODE
+ tristate
+
+config SYSCON_REBOOT_MODE
+ tristate "Generic SYSCON regmap reboot mode driver"
+ depends on OF
+ depends on MFD_SYSCON
+ select REBOOT_MODE
+ help
+ Say y here will enable reboot mode driver. This will
+ get reboot mode arguments and store it in SYSCON mapped
+ register, then the bootloader can read it to take different
+ action according to the mode.
+
+config POWER_RESET_SC27XX
+ tristate "Spreadtrum SC27xx PMIC power-off driver"
+ depends on MFD_SC27XX_PMIC || COMPILE_TEST
+ help
+ This driver supports powering off a system through
+ Spreadtrum SC27xx series PMICs. The SC27xx series
+ PMICs includes the SC2720, SC2721, SC2723, SC2730
+ and SC2731 chips.
+
+config NVMEM_REBOOT_MODE
+ tristate "Generic NVMEM reboot mode driver"
+ depends on OF
+ select REBOOT_MODE
+ help
+ Say y here will enable reboot mode driver. This will
+ get reboot mode arguments and store it in a NVMEM cell,
+ then the bootloader can read it and take different
+ action according to the mode.
+
+endif
+
diff --git a/drivers/power/reset/Makefile b/drivers/power/reset/Makefile
new file mode 100644
index 000000000..c51eceba9
--- /dev/null
+++ b/drivers/power/reset/Makefile
@@ -0,0 +1,35 @@
+# SPDX-License-Identifier: GPL-2.0
+obj-$(CONFIG_POWER_RESET_AS3722) += as3722-poweroff.o
+obj-$(CONFIG_POWER_RESET_AT91_POWEROFF) += at91-poweroff.o
+obj-$(CONFIG_POWER_RESET_AT91_RESET) += at91-reset.o
+obj-$(CONFIG_POWER_RESET_AT91_SAMA5D2_SHDWC) += at91-sama5d2_shdwc.o
+obj-$(CONFIG_POWER_RESET_AXXIA) += axxia-reset.o
+obj-$(CONFIG_POWER_RESET_BRCMKONA) += brcm-kona-reset.o
+obj-$(CONFIG_POWER_RESET_BRCMSTB) += brcmstb-reboot.o
+obj-$(CONFIG_POWER_RESET_GEMINI_POWEROFF) += gemini-poweroff.o
+obj-$(CONFIG_POWER_RESET_GPIO) += gpio-poweroff.o
+obj-$(CONFIG_POWER_RESET_GPIO_RESTART) += gpio-restart.o
+obj-$(CONFIG_POWER_RESET_HISI) += hisi-reboot.o
+obj-${CONFIG_POWER_RESET_LINKSTATION} += linkstation-poweroff.o
+obj-$(CONFIG_POWER_RESET_MSM) += msm-poweroff.o
+obj-$(CONFIG_POWER_RESET_MT6323) += mt6323-poweroff.o
+obj-$(CONFIG_POWER_RESET_OXNAS) += oxnas-restart.o
+obj-$(CONFIG_POWER_RESET_QCOM_PON) += qcom-pon.o
+obj-$(CONFIG_POWER_RESET_OCELOT_RESET) += ocelot-reset.o
+obj-$(CONFIG_POWER_RESET_PIIX4_POWEROFF) += piix4-poweroff.o
+obj-$(CONFIG_POWER_RESET_LTC2952) += ltc2952-poweroff.o
+obj-$(CONFIG_POWER_RESET_QNAP) += qnap-poweroff.o
+obj-$(CONFIG_POWER_RESET_RESTART) += restart-poweroff.o
+obj-$(CONFIG_POWER_RESET_ST) += st-poweroff.o
+obj-$(CONFIG_POWER_RESET_VERSATILE) += arm-versatile-reboot.o
+obj-$(CONFIG_POWER_RESET_VEXPRESS) += vexpress-poweroff.o
+obj-$(CONFIG_POWER_RESET_XGENE) += xgene-reboot.o
+obj-$(CONFIG_POWER_RESET_KEYSTONE) += keystone-reset.o
+obj-$(CONFIG_POWER_RESET_SYSCON) += syscon-reboot.o
+obj-$(CONFIG_POWER_RESET_SYSCON_POWEROFF) += syscon-poweroff.o
+obj-$(CONFIG_POWER_RESET_RMOBILE) += rmobile-reset.o
+obj-$(CONFIG_POWER_RESET_ZX) += zx-reboot.o
+obj-$(CONFIG_REBOOT_MODE) += reboot-mode.o
+obj-$(CONFIG_SYSCON_REBOOT_MODE) += syscon-reboot-mode.o
+obj-$(CONFIG_POWER_RESET_SC27XX) += sc27xx-poweroff.o
+obj-$(CONFIG_NVMEM_REBOOT_MODE) += nvmem-reboot-mode.o
diff --git a/drivers/power/reset/arm-versatile-reboot.c b/drivers/power/reset/arm-versatile-reboot.c
new file mode 100644
index 000000000..c7624d761
--- /dev/null
+++ b/drivers/power/reset/arm-versatile-reboot.c
@@ -0,0 +1,160 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2014 Linaro Ltd.
+ *
+ * Author: Linus Walleij <linus.walleij@linaro.org>
+ */
+#include <linux/init.h>
+#include <linux/mfd/syscon.h>
+#include <linux/reboot.h>
+#include <linux/regmap.h>
+#include <linux/of.h>
+
+#define INTEGRATOR_HDR_CTRL_OFFSET 0x0C
+#define INTEGRATOR_HDR_LOCK_OFFSET 0x14
+#define INTEGRATOR_CM_CTRL_RESET (1 << 3)
+
+#define VERSATILE_SYS_LOCK_OFFSET 0x20
+#define VERSATILE_SYS_RESETCTL_OFFSET 0x40
+
+/* Magic unlocking token used on all Versatile boards */
+#define VERSATILE_LOCK_VAL 0xA05F
+
+/*
+ * We detect the different syscon types from the compatible strings.
+ */
+enum versatile_reboot {
+ INTEGRATOR_REBOOT_CM,
+ VERSATILE_REBOOT_CM,
+ REALVIEW_REBOOT_EB,
+ REALVIEW_REBOOT_PB1176,
+ REALVIEW_REBOOT_PB11MP,
+ REALVIEW_REBOOT_PBA8,
+ REALVIEW_REBOOT_PBX,
+};
+
+/* Pointer to the system controller */
+static struct regmap *syscon_regmap;
+static enum versatile_reboot versatile_reboot_type;
+
+static const struct of_device_id versatile_reboot_of_match[] = {
+ {
+ .compatible = "arm,core-module-integrator",
+ .data = (void *)INTEGRATOR_REBOOT_CM
+ },
+ {
+ .compatible = "arm,core-module-versatile",
+ .data = (void *)VERSATILE_REBOOT_CM,
+ },
+ {
+ .compatible = "arm,realview-eb-syscon",
+ .data = (void *)REALVIEW_REBOOT_EB,
+ },
+ {
+ .compatible = "arm,realview-pb1176-syscon",
+ .data = (void *)REALVIEW_REBOOT_PB1176,
+ },
+ {
+ .compatible = "arm,realview-pb11mp-syscon",
+ .data = (void *)REALVIEW_REBOOT_PB11MP,
+ },
+ {
+ .compatible = "arm,realview-pba8-syscon",
+ .data = (void *)REALVIEW_REBOOT_PBA8,
+ },
+ {
+ .compatible = "arm,realview-pbx-syscon",
+ .data = (void *)REALVIEW_REBOOT_PBX,
+ },
+ {},
+};
+
+static int versatile_reboot(struct notifier_block *this, unsigned long mode,
+ void *cmd)
+{
+ /* Unlock the reset register */
+ /* Then hit reset on the different machines */
+ switch (versatile_reboot_type) {
+ case INTEGRATOR_REBOOT_CM:
+ regmap_write(syscon_regmap, INTEGRATOR_HDR_LOCK_OFFSET,
+ VERSATILE_LOCK_VAL);
+ regmap_update_bits(syscon_regmap,
+ INTEGRATOR_HDR_CTRL_OFFSET,
+ INTEGRATOR_CM_CTRL_RESET,
+ INTEGRATOR_CM_CTRL_RESET);
+ break;
+ case VERSATILE_REBOOT_CM:
+ regmap_write(syscon_regmap, VERSATILE_SYS_LOCK_OFFSET,
+ VERSATILE_LOCK_VAL);
+ regmap_update_bits(syscon_regmap,
+ VERSATILE_SYS_RESETCTL_OFFSET,
+ 0x0107,
+ 0x0105);
+ regmap_write(syscon_regmap, VERSATILE_SYS_LOCK_OFFSET,
+ 0);
+ break;
+ case REALVIEW_REBOOT_EB:
+ regmap_write(syscon_regmap, VERSATILE_SYS_LOCK_OFFSET,
+ VERSATILE_LOCK_VAL);
+ regmap_write(syscon_regmap,
+ VERSATILE_SYS_RESETCTL_OFFSET, 0x0008);
+ break;
+ case REALVIEW_REBOOT_PB1176:
+ regmap_write(syscon_regmap, VERSATILE_SYS_LOCK_OFFSET,
+ VERSATILE_LOCK_VAL);
+ regmap_write(syscon_regmap,
+ VERSATILE_SYS_RESETCTL_OFFSET, 0x0100);
+ break;
+ case REALVIEW_REBOOT_PB11MP:
+ case REALVIEW_REBOOT_PBA8:
+ regmap_write(syscon_regmap, VERSATILE_SYS_LOCK_OFFSET,
+ VERSATILE_LOCK_VAL);
+ regmap_write(syscon_regmap, VERSATILE_SYS_RESETCTL_OFFSET,
+ 0x0000);
+ regmap_write(syscon_regmap, VERSATILE_SYS_RESETCTL_OFFSET,
+ 0x0004);
+ break;
+ case REALVIEW_REBOOT_PBX:
+ regmap_write(syscon_regmap, VERSATILE_SYS_LOCK_OFFSET,
+ VERSATILE_LOCK_VAL);
+ regmap_write(syscon_regmap, VERSATILE_SYS_RESETCTL_OFFSET,
+ 0x00f0);
+ regmap_write(syscon_regmap, VERSATILE_SYS_RESETCTL_OFFSET,
+ 0x00f4);
+ break;
+ }
+ dsb();
+
+ return NOTIFY_DONE;
+}
+
+static struct notifier_block versatile_reboot_nb = {
+ .notifier_call = versatile_reboot,
+ .priority = 192,
+};
+
+static int __init versatile_reboot_probe(void)
+{
+ const struct of_device_id *reboot_id;
+ struct device_node *np;
+ int err;
+
+ np = of_find_matching_node_and_match(NULL, versatile_reboot_of_match,
+ &reboot_id);
+ if (!np)
+ return -ENODEV;
+ versatile_reboot_type = (enum versatile_reboot)reboot_id->data;
+
+ syscon_regmap = syscon_node_to_regmap(np);
+ of_node_put(np);
+ if (IS_ERR(syscon_regmap))
+ return PTR_ERR(syscon_regmap);
+
+ err = register_restart_handler(&versatile_reboot_nb);
+ if (err)
+ return err;
+
+ pr_info("versatile reboot driver registered\n");
+ return 0;
+}
+device_initcall(versatile_reboot_probe);
diff --git a/drivers/power/reset/as3722-poweroff.c b/drivers/power/reset/as3722-poweroff.c
new file mode 100644
index 000000000..661e1c67f
--- /dev/null
+++ b/drivers/power/reset/as3722-poweroff.c
@@ -0,0 +1,87 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Power off driver for ams AS3722 device.
+ *
+ * Copyright (c) 2013, NVIDIA CORPORATION. All rights reserved.
+ *
+ * Author: Laxman Dewangan <ldewangan@nvidia.com>
+ */
+
+#include <linux/mfd/as3722.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+struct as3722_poweroff {
+ struct device *dev;
+ struct as3722 *as3722;
+};
+
+static struct as3722_poweroff *as3722_pm_poweroff;
+
+static void as3722_pm_power_off(void)
+{
+ int ret;
+
+ if (!as3722_pm_poweroff) {
+ pr_err("AS3722 poweroff is not initialised\n");
+ return;
+ }
+
+ ret = as3722_update_bits(as3722_pm_poweroff->as3722,
+ AS3722_RESET_CONTROL_REG, AS3722_POWER_OFF, AS3722_POWER_OFF);
+ if (ret < 0)
+ dev_err(as3722_pm_poweroff->dev,
+ "RESET_CONTROL_REG update failed, %d\n", ret);
+}
+
+static int as3722_poweroff_probe(struct platform_device *pdev)
+{
+ struct as3722_poweroff *as3722_poweroff;
+ struct device_node *np = pdev->dev.parent->of_node;
+
+ if (!np)
+ return -EINVAL;
+
+ if (!of_property_read_bool(np, "ams,system-power-controller"))
+ return 0;
+
+ as3722_poweroff = devm_kzalloc(&pdev->dev, sizeof(*as3722_poweroff),
+ GFP_KERNEL);
+ if (!as3722_poweroff)
+ return -ENOMEM;
+
+ as3722_poweroff->as3722 = dev_get_drvdata(pdev->dev.parent);
+ as3722_poweroff->dev = &pdev->dev;
+ as3722_pm_poweroff = as3722_poweroff;
+ if (!pm_power_off)
+ pm_power_off = as3722_pm_power_off;
+
+ return 0;
+}
+
+static int as3722_poweroff_remove(struct platform_device *pdev)
+{
+ if (pm_power_off == as3722_pm_power_off)
+ pm_power_off = NULL;
+ as3722_pm_poweroff = NULL;
+
+ return 0;
+}
+
+static struct platform_driver as3722_poweroff_driver = {
+ .driver = {
+ .name = "as3722-power-off",
+ },
+ .probe = as3722_poweroff_probe,
+ .remove = as3722_poweroff_remove,
+};
+
+module_platform_driver(as3722_poweroff_driver);
+
+MODULE_DESCRIPTION("Power off driver for ams AS3722 PMIC Device");
+MODULE_ALIAS("platform:as3722-power-off");
+MODULE_AUTHOR("Laxman Dewangan <ldewangan@nvidia.com>");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/power/reset/at91-poweroff.c b/drivers/power/reset/at91-poweroff.c
new file mode 100644
index 000000000..9e74e131c
--- /dev/null
+++ b/drivers/power/reset/at91-poweroff.c
@@ -0,0 +1,239 @@
+/*
+ * Atmel AT91 SAM9 SoCs reset code
+ *
+ * Copyright (C) 2007 Atmel Corporation.
+ * Copyright (C) 2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ * Copyright (C) 2014 Free Electrons
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/platform_device.h>
+#include <linux/printk.h>
+
+#include <soc/at91/at91sam9_ddrsdr.h>
+
+#define AT91_SHDW_CR 0x00 /* Shut Down Control Register */
+#define AT91_SHDW_SHDW BIT(0) /* Shut Down command */
+#define AT91_SHDW_KEY (0xa5 << 24) /* KEY Password */
+
+#define AT91_SHDW_MR 0x04 /* Shut Down Mode Register */
+#define AT91_SHDW_WKMODE0 GENMASK(2, 0) /* Wake-up 0 Mode Selection */
+#define AT91_SHDW_CPTWK0_MAX 0xf /* Maximum Counter On Wake Up 0 */
+#define AT91_SHDW_CPTWK0 (AT91_SHDW_CPTWK0_MAX << 4) /* Counter On Wake Up 0 */
+#define AT91_SHDW_CPTWK0_(x) ((x) << 4)
+#define AT91_SHDW_RTTWKEN BIT(16) /* Real Time Timer Wake-up Enable */
+#define AT91_SHDW_RTCWKEN BIT(17) /* Real Time Clock Wake-up Enable */
+
+#define AT91_SHDW_SR 0x08 /* Shut Down Status Register */
+#define AT91_SHDW_WAKEUP0 BIT(0) /* Wake-up 0 Status */
+#define AT91_SHDW_RTTWK BIT(16) /* Real-time Timer Wake-up */
+#define AT91_SHDW_RTCWK BIT(17) /* Real-time Clock Wake-up [SAM9RL] */
+
+enum wakeup_type {
+ AT91_SHDW_WKMODE0_NONE = 0,
+ AT91_SHDW_WKMODE0_HIGH = 1,
+ AT91_SHDW_WKMODE0_LOW = 2,
+ AT91_SHDW_WKMODE0_ANYLEVEL = 3,
+};
+
+static const char *shdwc_wakeup_modes[] = {
+ [AT91_SHDW_WKMODE0_NONE] = "none",
+ [AT91_SHDW_WKMODE0_HIGH] = "high",
+ [AT91_SHDW_WKMODE0_LOW] = "low",
+ [AT91_SHDW_WKMODE0_ANYLEVEL] = "any",
+};
+
+static struct shdwc {
+ struct clk *sclk;
+ void __iomem *shdwc_base;
+ void __iomem *mpddrc_base;
+} at91_shdwc;
+
+static void __init at91_wakeup_status(struct platform_device *pdev)
+{
+ const char *reason;
+ u32 reg = readl(at91_shdwc.shdwc_base + AT91_SHDW_SR);
+
+ /* Simple power-on, just bail out */
+ if (!reg)
+ return;
+
+ if (reg & AT91_SHDW_RTTWK)
+ reason = "RTT";
+ else if (reg & AT91_SHDW_RTCWK)
+ reason = "RTC";
+ else
+ reason = "unknown";
+
+ dev_info(&pdev->dev, "Wake-Up source: %s\n", reason);
+}
+
+static void at91_poweroff(void)
+{
+ asm volatile(
+ /* Align to cache lines */
+ ".balign 32\n\t"
+
+ /* Ensure AT91_SHDW_CR is in the TLB by reading it */
+ " ldr r6, [%2, #" __stringify(AT91_SHDW_CR) "]\n\t"
+
+ /* Power down SDRAM0 */
+ " tst %0, #0\n\t"
+ " beq 1f\n\t"
+ " str %1, [%0, #" __stringify(AT91_DDRSDRC_LPR) "]\n\t"
+ /* Shutdown CPU */
+ "1: str %3, [%2, #" __stringify(AT91_SHDW_CR) "]\n\t"
+
+ " b .\n\t"
+ :
+ : "r" (at91_shdwc.mpddrc_base),
+ "r" cpu_to_le32(AT91_DDRSDRC_LPDDR2_PWOFF),
+ "r" (at91_shdwc.shdwc_base),
+ "r" cpu_to_le32(AT91_SHDW_KEY | AT91_SHDW_SHDW)
+ : "r6");
+}
+
+static int at91_poweroff_get_wakeup_mode(struct device_node *np)
+{
+ const char *pm;
+ unsigned int i;
+ int err;
+
+ err = of_property_read_string(np, "atmel,wakeup-mode", &pm);
+ if (err < 0)
+ return AT91_SHDW_WKMODE0_ANYLEVEL;
+
+ for (i = 0; i < ARRAY_SIZE(shdwc_wakeup_modes); i++)
+ if (!strcasecmp(pm, shdwc_wakeup_modes[i]))
+ return i;
+
+ return -ENODEV;
+}
+
+static void at91_poweroff_dt_set_wakeup_mode(struct platform_device *pdev)
+{
+ struct device_node *np = pdev->dev.of_node;
+ int wakeup_mode;
+ u32 mode = 0, tmp;
+
+ wakeup_mode = at91_poweroff_get_wakeup_mode(np);
+ if (wakeup_mode < 0) {
+ dev_warn(&pdev->dev, "shdwc unknown wakeup mode\n");
+ return;
+ }
+
+ if (!of_property_read_u32(np, "atmel,wakeup-counter", &tmp)) {
+ if (tmp > AT91_SHDW_CPTWK0_MAX) {
+ dev_warn(&pdev->dev,
+ "shdwc wakeup counter 0x%x > 0x%x reduce it to 0x%x\n",
+ tmp, AT91_SHDW_CPTWK0_MAX, AT91_SHDW_CPTWK0_MAX);
+ tmp = AT91_SHDW_CPTWK0_MAX;
+ }
+ mode |= AT91_SHDW_CPTWK0_(tmp);
+ }
+
+ if (of_property_read_bool(np, "atmel,wakeup-rtc-timer"))
+ mode |= AT91_SHDW_RTCWKEN;
+
+ if (of_property_read_bool(np, "atmel,wakeup-rtt-timer"))
+ mode |= AT91_SHDW_RTTWKEN;
+
+ writel(wakeup_mode | mode, at91_shdwc.shdwc_base + AT91_SHDW_MR);
+}
+
+static int __init at91_poweroff_probe(struct platform_device *pdev)
+{
+ struct resource *res;
+ struct device_node *np;
+ u32 ddr_type;
+ int ret;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ at91_shdwc.shdwc_base = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(at91_shdwc.shdwc_base))
+ return PTR_ERR(at91_shdwc.shdwc_base);
+
+ at91_shdwc.sclk = devm_clk_get(&pdev->dev, NULL);
+ if (IS_ERR(at91_shdwc.sclk))
+ return PTR_ERR(at91_shdwc.sclk);
+
+ ret = clk_prepare_enable(at91_shdwc.sclk);
+ if (ret) {
+ dev_err(&pdev->dev, "Could not enable slow clock\n");
+ return ret;
+ }
+
+ at91_wakeup_status(pdev);
+
+ if (pdev->dev.of_node)
+ at91_poweroff_dt_set_wakeup_mode(pdev);
+
+ np = of_find_compatible_node(NULL, NULL, "atmel,sama5d3-ddramc");
+ if (np) {
+ at91_shdwc.mpddrc_base = of_iomap(np, 0);
+ of_node_put(np);
+
+ if (!at91_shdwc.mpddrc_base) {
+ ret = -ENOMEM;
+ goto clk_disable;
+ }
+
+ ddr_type = readl(at91_shdwc.mpddrc_base + AT91_DDRSDRC_MDR) &
+ AT91_DDRSDRC_MD;
+ if (ddr_type != AT91_DDRSDRC_MD_LPDDR2 &&
+ ddr_type != AT91_DDRSDRC_MD_LPDDR3) {
+ iounmap(at91_shdwc.mpddrc_base);
+ at91_shdwc.mpddrc_base = NULL;
+ }
+ }
+
+ pm_power_off = at91_poweroff;
+
+ return 0;
+
+clk_disable:
+ clk_disable_unprepare(at91_shdwc.sclk);
+ return ret;
+}
+
+static int __exit at91_poweroff_remove(struct platform_device *pdev)
+{
+ if (pm_power_off == at91_poweroff)
+ pm_power_off = NULL;
+
+ if (at91_shdwc.mpddrc_base)
+ iounmap(at91_shdwc.mpddrc_base);
+
+ clk_disable_unprepare(at91_shdwc.sclk);
+
+ return 0;
+}
+
+static const struct of_device_id at91_poweroff_of_match[] = {
+ { .compatible = "atmel,at91sam9260-shdwc", },
+ { .compatible = "atmel,at91sam9rl-shdwc", },
+ { .compatible = "atmel,at91sam9x5-shdwc", },
+ { /*sentinel*/ }
+};
+MODULE_DEVICE_TABLE(of, at91_poweroff_of_match);
+
+static struct platform_driver at91_poweroff_driver = {
+ .remove = __exit_p(at91_poweroff_remove),
+ .driver = {
+ .name = "at91-poweroff",
+ .of_match_table = at91_poweroff_of_match,
+ },
+};
+module_platform_driver_probe(at91_poweroff_driver, at91_poweroff_probe);
+
+MODULE_AUTHOR("Atmel Corporation");
+MODULE_DESCRIPTION("Shutdown driver for Atmel SoCs");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/power/reset/at91-reset.c b/drivers/power/reset/at91-reset.c
new file mode 100644
index 000000000..3ff9d93a5
--- /dev/null
+++ b/drivers/power/reset/at91-reset.c
@@ -0,0 +1,271 @@
+/*
+ * Atmel AT91 SAM9 & SAMA5 SoCs reset code
+ *
+ * Copyright (C) 2007 Atmel Corporation.
+ * Copyright (C) BitBox Ltd 2010
+ * Copyright (C) 2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcosoft.com>
+ * Copyright (C) 2014 Free Electrons
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of_address.h>
+#include <linux/platform_device.h>
+#include <linux/reboot.h>
+
+#include <soc/at91/at91sam9_ddrsdr.h>
+#include <soc/at91/at91sam9_sdramc.h>
+
+#define AT91_RSTC_CR 0x00 /* Reset Controller Control Register */
+#define AT91_RSTC_PROCRST BIT(0) /* Processor Reset */
+#define AT91_RSTC_PERRST BIT(2) /* Peripheral Reset */
+#define AT91_RSTC_EXTRST BIT(3) /* External Reset */
+#define AT91_RSTC_KEY (0xa5 << 24) /* KEY Password */
+
+#define AT91_RSTC_SR 0x04 /* Reset Controller Status Register */
+#define AT91_RSTC_URSTS BIT(0) /* User Reset Status */
+#define AT91_RSTC_RSTTYP GENMASK(10, 8) /* Reset Type */
+#define AT91_RSTC_NRSTL BIT(16) /* NRST Pin Level */
+#define AT91_RSTC_SRCMP BIT(17) /* Software Reset Command in Progress */
+
+#define AT91_RSTC_MR 0x08 /* Reset Controller Mode Register */
+#define AT91_RSTC_URSTEN BIT(0) /* User Reset Enable */
+#define AT91_RSTC_URSTASYNC BIT(2) /* User Reset Asynchronous Control */
+#define AT91_RSTC_URSTIEN BIT(4) /* User Reset Interrupt Enable */
+#define AT91_RSTC_ERSTL GENMASK(11, 8) /* External Reset Length */
+
+enum reset_type {
+ RESET_TYPE_GENERAL = 0,
+ RESET_TYPE_WAKEUP = 1,
+ RESET_TYPE_WATCHDOG = 2,
+ RESET_TYPE_SOFTWARE = 3,
+ RESET_TYPE_USER = 4,
+ RESET_TYPE_CPU_FAIL = 6,
+ RESET_TYPE_XTAL_FAIL = 7,
+ RESET_TYPE_ULP2 = 8,
+};
+
+struct at91_reset {
+ void __iomem *rstc_base;
+ void __iomem *ramc_base[2];
+ struct clk *sclk;
+ struct notifier_block nb;
+ u32 args;
+ u32 ramc_lpr;
+};
+
+/*
+* unless the SDRAM is cleanly shutdown before we hit the
+* reset register it can be left driving the data bus and
+* killing the chance of a subsequent boot from NAND
+*/
+static int at91_reset(struct notifier_block *this, unsigned long mode,
+ void *cmd)
+{
+ struct at91_reset *reset = container_of(this, struct at91_reset, nb);
+
+ asm volatile(
+ /* Align to cache lines */
+ ".balign 32\n\t"
+
+ /* Disable SDRAM0 accesses */
+ " tst %0, #0\n\t"
+ " beq 1f\n\t"
+ " str %3, [%0, #" __stringify(AT91_DDRSDRC_RTR) "]\n\t"
+ /* Power down SDRAM0 */
+ " str %4, [%0, %6]\n\t"
+ /* Disable SDRAM1 accesses */
+ "1: tst %1, #0\n\t"
+ " beq 2f\n\t"
+ " strne %3, [%1, #" __stringify(AT91_DDRSDRC_RTR) "]\n\t"
+ /* Power down SDRAM1 */
+ " strne %4, [%1, %6]\n\t"
+ /* Reset CPU */
+ "2: str %5, [%2, #" __stringify(AT91_RSTC_CR) "]\n\t"
+
+ " b .\n\t"
+ :
+ : "r" (reset->ramc_base[0]),
+ "r" (reset->ramc_base[1]),
+ "r" (reset->rstc_base),
+ "r" (1),
+ "r" cpu_to_le32(AT91_DDRSDRC_LPCB_POWER_DOWN),
+ "r" (reset->args),
+ "r" (reset->ramc_lpr)
+ : "r4");
+
+ return NOTIFY_DONE;
+}
+
+static void __init at91_reset_status(struct platform_device *pdev,
+ void __iomem *base)
+{
+ const char *reason;
+ u32 reg = readl(base + AT91_RSTC_SR);
+
+ switch ((reg & AT91_RSTC_RSTTYP) >> 8) {
+ case RESET_TYPE_GENERAL:
+ reason = "general reset";
+ break;
+ case RESET_TYPE_WAKEUP:
+ reason = "wakeup";
+ break;
+ case RESET_TYPE_WATCHDOG:
+ reason = "watchdog reset";
+ break;
+ case RESET_TYPE_SOFTWARE:
+ reason = "software reset";
+ break;
+ case RESET_TYPE_USER:
+ reason = "user reset";
+ break;
+ case RESET_TYPE_CPU_FAIL:
+ reason = "CPU clock failure detection";
+ break;
+ case RESET_TYPE_XTAL_FAIL:
+ reason = "32.768 kHz crystal failure detection";
+ break;
+ case RESET_TYPE_ULP2:
+ reason = "ULP2 reset";
+ break;
+ default:
+ reason = "unknown reset";
+ break;
+ }
+
+ dev_info(&pdev->dev, "Starting after %s\n", reason);
+}
+
+static const struct of_device_id at91_ramc_of_match[] = {
+ {
+ .compatible = "atmel,at91sam9260-sdramc",
+ .data = (void *)AT91_SDRAMC_LPR,
+ },
+ {
+ .compatible = "atmel,at91sam9g45-ddramc",
+ .data = (void *)AT91_DDRSDRC_LPR,
+ },
+ { /* sentinel */ }
+};
+
+static const struct of_device_id at91_reset_of_match[] = {
+ {
+ .compatible = "atmel,at91sam9260-rstc",
+ .data = (void *)(AT91_RSTC_KEY | AT91_RSTC_PERRST |
+ AT91_RSTC_PROCRST),
+ },
+ {
+ .compatible = "atmel,at91sam9g45-rstc",
+ .data = (void *)(AT91_RSTC_KEY | AT91_RSTC_PERRST |
+ AT91_RSTC_PROCRST)
+ },
+ {
+ .compatible = "atmel,sama5d3-rstc",
+ .data = (void *)(AT91_RSTC_KEY | AT91_RSTC_PERRST |
+ AT91_RSTC_PROCRST)
+ },
+ {
+ .compatible = "atmel,samx7-rstc",
+ .data = (void *)(AT91_RSTC_KEY | AT91_RSTC_PROCRST)
+ },
+ {
+ .compatible = "microchip,sam9x60-rstc",
+ .data = (void *)(AT91_RSTC_KEY | AT91_RSTC_PROCRST)
+ },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, at91_reset_of_match);
+
+static int __init at91_reset_probe(struct platform_device *pdev)
+{
+ const struct of_device_id *match;
+ struct at91_reset *reset;
+ struct device_node *np;
+ int ret, idx = 0;
+
+ reset = devm_kzalloc(&pdev->dev, sizeof(*reset), GFP_KERNEL);
+ if (!reset)
+ return -ENOMEM;
+
+ reset->rstc_base = of_iomap(pdev->dev.of_node, 0);
+ if (!reset->rstc_base) {
+ dev_err(&pdev->dev, "Could not map reset controller address\n");
+ return -ENODEV;
+ }
+
+ if (!of_device_is_compatible(pdev->dev.of_node, "atmel,sama5d3-rstc")) {
+ /* we need to shutdown the ddr controller, so get ramc base */
+ for_each_matching_node_and_match(np, at91_ramc_of_match, &match) {
+ reset->ramc_lpr = (u32)match->data;
+ reset->ramc_base[idx] = of_iomap(np, 0);
+ if (!reset->ramc_base[idx]) {
+ dev_err(&pdev->dev, "Could not map ram controller address\n");
+ of_node_put(np);
+ return -ENODEV;
+ }
+ idx++;
+ }
+ }
+
+ match = of_match_node(at91_reset_of_match, pdev->dev.of_node);
+ reset->nb.notifier_call = at91_reset;
+ reset->nb.priority = 192;
+ reset->args = (u32)match->data;
+
+ reset->sclk = devm_clk_get(&pdev->dev, NULL);
+ if (IS_ERR(reset->sclk))
+ return PTR_ERR(reset->sclk);
+
+ ret = clk_prepare_enable(reset->sclk);
+ if (ret) {
+ dev_err(&pdev->dev, "Could not enable slow clock\n");
+ return ret;
+ }
+
+ platform_set_drvdata(pdev, reset);
+
+ if (of_device_is_compatible(pdev->dev.of_node, "microchip,sam9x60-rstc")) {
+ u32 val = readl(reset->rstc_base + AT91_RSTC_MR);
+
+ writel(AT91_RSTC_KEY | AT91_RSTC_URSTASYNC | val,
+ reset->rstc_base + AT91_RSTC_MR);
+ }
+
+ ret = register_restart_handler(&reset->nb);
+ if (ret) {
+ clk_disable_unprepare(reset->sclk);
+ return ret;
+ }
+
+ at91_reset_status(pdev, reset->rstc_base);
+
+ return 0;
+}
+
+static int __exit at91_reset_remove(struct platform_device *pdev)
+{
+ struct at91_reset *reset = platform_get_drvdata(pdev);
+
+ unregister_restart_handler(&reset->nb);
+ clk_disable_unprepare(reset->sclk);
+
+ return 0;
+}
+
+static struct platform_driver at91_reset_driver = {
+ .remove = __exit_p(at91_reset_remove),
+ .driver = {
+ .name = "at91-reset",
+ .of_match_table = at91_reset_of_match,
+ },
+};
+module_platform_driver_probe(at91_reset_driver, at91_reset_probe);
+
+MODULE_AUTHOR("Atmel Corporation");
+MODULE_DESCRIPTION("Reset driver for Atmel SoCs");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/power/reset/at91-sama5d2_shdwc.c b/drivers/power/reset/at91-sama5d2_shdwc.c
new file mode 100644
index 000000000..d9cf91e5b
--- /dev/null
+++ b/drivers/power/reset/at91-sama5d2_shdwc.c
@@ -0,0 +1,423 @@
+/*
+ * Atmel SAMA5D2-Compatible Shutdown Controller (SHDWC) driver.
+ * Found on some SoCs as the sama5d2 (obviously).
+ *
+ * Copyright (C) 2015 Atmel Corporation,
+ * Nicolas Ferre <nicolas.ferre@atmel.com>
+ *
+ * Evolved from driver at91-poweroff.c.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ *
+ * TODO:
+ * - addition to status of other wake-up inputs [1 - 15]
+ * - Analog Comparator wake-up alarm
+ * - Serial RX wake-up alarm
+ * - low power debouncer
+ */
+
+#include <linux/clk.h>
+#include <linux/clk/at91_pmc.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/platform_device.h>
+#include <linux/printk.h>
+
+#include <soc/at91/at91sam9_ddrsdr.h>
+
+#define SLOW_CLOCK_FREQ 32768
+
+#define AT91_SHDW_CR 0x00 /* Shut Down Control Register */
+#define AT91_SHDW_SHDW BIT(0) /* Shut Down command */
+#define AT91_SHDW_KEY (0xa5UL << 24) /* KEY Password */
+
+#define AT91_SHDW_MR 0x04 /* Shut Down Mode Register */
+#define AT91_SHDW_WKUPDBC_SHIFT 24
+#define AT91_SHDW_WKUPDBC_MASK GENMASK(26, 24)
+#define AT91_SHDW_WKUPDBC(x) (((x) << AT91_SHDW_WKUPDBC_SHIFT) \
+ & AT91_SHDW_WKUPDBC_MASK)
+
+#define AT91_SHDW_SR 0x08 /* Shut Down Status Register */
+#define AT91_SHDW_WKUPIS_SHIFT 16
+#define AT91_SHDW_WKUPIS_MASK GENMASK(31, 16)
+#define AT91_SHDW_WKUPIS(x) ((1 << (x)) << AT91_SHDW_WKUPIS_SHIFT \
+ & AT91_SHDW_WKUPIS_MASK)
+
+#define AT91_SHDW_WUIR 0x0c /* Shutdown Wake-up Inputs Register */
+#define AT91_SHDW_WKUPEN_MASK GENMASK(15, 0)
+#define AT91_SHDW_WKUPEN(x) ((1 << (x)) & AT91_SHDW_WKUPEN_MASK)
+#define AT91_SHDW_WKUPT_SHIFT 16
+#define AT91_SHDW_WKUPT_MASK GENMASK(31, 16)
+#define AT91_SHDW_WKUPT(x) ((1 << (x)) << AT91_SHDW_WKUPT_SHIFT \
+ & AT91_SHDW_WKUPT_MASK)
+
+#define SHDW_WK_PIN(reg, cfg) ((reg) & AT91_SHDW_WKUPIS((cfg)->wkup_pin_input))
+#define SHDW_RTCWK(reg, cfg) (((reg) >> ((cfg)->sr_rtcwk_shift)) & 0x1)
+#define SHDW_RTTWK(reg, cfg) (((reg) >> ((cfg)->sr_rttwk_shift)) & 0x1)
+#define SHDW_RTCWKEN(cfg) (1 << ((cfg)->mr_rtcwk_shift))
+#define SHDW_RTTWKEN(cfg) (1 << ((cfg)->mr_rttwk_shift))
+
+#define DBC_PERIOD_US(x) DIV_ROUND_UP_ULL((1000000 * (x)), \
+ SLOW_CLOCK_FREQ)
+
+#define SHDW_CFG_NOT_USED (32)
+
+struct shdwc_reg_config {
+ u8 wkup_pin_input;
+ u8 mr_rtcwk_shift;
+ u8 mr_rttwk_shift;
+ u8 sr_rtcwk_shift;
+ u8 sr_rttwk_shift;
+};
+
+struct pmc_reg_config {
+ u8 mckr;
+};
+
+struct reg_config {
+ struct shdwc_reg_config shdwc;
+ struct pmc_reg_config pmc;
+};
+
+struct shdwc {
+ const struct reg_config *rcfg;
+ struct clk *sclk;
+ void __iomem *shdwc_base;
+ void __iomem *mpddrc_base;
+ void __iomem *pmc_base;
+};
+
+/*
+ * Hold configuration here, cannot be more than one instance of the driver
+ * since pm_power_off itself is global.
+ */
+static struct shdwc *at91_shdwc;
+
+static const unsigned long long sdwc_dbc_period[] = {
+ 0, 3, 32, 512, 4096, 32768,
+};
+
+static void __init at91_wakeup_status(struct platform_device *pdev)
+{
+ struct shdwc *shdw = platform_get_drvdata(pdev);
+ const struct reg_config *rcfg = shdw->rcfg;
+ u32 reg;
+ char *reason = "unknown";
+
+ reg = readl(shdw->shdwc_base + AT91_SHDW_SR);
+
+ dev_dbg(&pdev->dev, "%s: status = %#x\n", __func__, reg);
+
+ /* Simple power-on, just bail out */
+ if (!reg)
+ return;
+
+ if (SHDW_WK_PIN(reg, &rcfg->shdwc))
+ reason = "WKUP pin";
+ else if (SHDW_RTCWK(reg, &rcfg->shdwc))
+ reason = "RTC";
+ else if (SHDW_RTTWK(reg, &rcfg->shdwc))
+ reason = "RTT";
+
+ pr_info("AT91: Wake-Up source: %s\n", reason);
+}
+
+static void at91_poweroff(void)
+{
+ asm volatile(
+ /* Align to cache lines */
+ ".balign 32\n\t"
+
+ /* Ensure AT91_SHDW_CR is in the TLB by reading it */
+ " ldr r6, [%2, #" __stringify(AT91_SHDW_CR) "]\n\t"
+
+ /* Power down SDRAM0 */
+ " tst %0, #0\n\t"
+ " beq 1f\n\t"
+ " str %1, [%0, #" __stringify(AT91_DDRSDRC_LPR) "]\n\t"
+
+ /* Switch the master clock source to slow clock. */
+ "1: ldr r6, [%4, %5]\n\t"
+ " bic r6, r6, #" __stringify(AT91_PMC_CSS) "\n\t"
+ " str r6, [%4, %5]\n\t"
+ /* Wait for clock switch. */
+ "2: ldr r6, [%4, #" __stringify(AT91_PMC_SR) "]\n\t"
+ " tst r6, #" __stringify(AT91_PMC_MCKRDY) "\n\t"
+ " beq 2b\n\t"
+
+ /* Shutdown CPU */
+ " str %3, [%2, #" __stringify(AT91_SHDW_CR) "]\n\t"
+
+ " b .\n\t"
+ :
+ : "r" (at91_shdwc->mpddrc_base),
+ "r" cpu_to_le32(AT91_DDRSDRC_LPDDR2_PWOFF),
+ "r" (at91_shdwc->shdwc_base),
+ "r" cpu_to_le32(AT91_SHDW_KEY | AT91_SHDW_SHDW),
+ "r" (at91_shdwc->pmc_base),
+ "r" (at91_shdwc->rcfg->pmc.mckr)
+ : "r6");
+}
+
+static u32 at91_shdwc_debouncer_value(struct platform_device *pdev,
+ u32 in_period_us)
+{
+ int i;
+ int max_idx = ARRAY_SIZE(sdwc_dbc_period) - 1;
+ unsigned long long period_us;
+ unsigned long long max_period_us = DBC_PERIOD_US(sdwc_dbc_period[max_idx]);
+
+ if (in_period_us > max_period_us) {
+ dev_warn(&pdev->dev,
+ "debouncer period %u too big, reduced to %llu us\n",
+ in_period_us, max_period_us);
+ return max_idx;
+ }
+
+ for (i = max_idx - 1; i > 0; i--) {
+ period_us = DBC_PERIOD_US(sdwc_dbc_period[i]);
+ dev_dbg(&pdev->dev, "%s: ref[%d] = %llu\n",
+ __func__, i, period_us);
+ if (in_period_us > period_us)
+ break;
+ }
+
+ return i + 1;
+}
+
+static u32 at91_shdwc_get_wakeup_input(struct platform_device *pdev,
+ struct device_node *np)
+{
+ struct device_node *cnp;
+ u32 wk_input_mask;
+ u32 wuir = 0;
+ u32 wk_input;
+
+ for_each_child_of_node(np, cnp) {
+ if (of_property_read_u32(cnp, "reg", &wk_input)) {
+ dev_warn(&pdev->dev, "reg property is missing for %pOF\n",
+ cnp);
+ continue;
+ }
+
+ wk_input_mask = 1 << wk_input;
+ if (!(wk_input_mask & AT91_SHDW_WKUPEN_MASK)) {
+ dev_warn(&pdev->dev,
+ "wake-up input %d out of bounds ignore\n",
+ wk_input);
+ continue;
+ }
+ wuir |= wk_input_mask;
+
+ if (of_property_read_bool(cnp, "atmel,wakeup-active-high"))
+ wuir |= AT91_SHDW_WKUPT(wk_input);
+
+ dev_dbg(&pdev->dev, "%s: (child %d) wuir = %#x\n",
+ __func__, wk_input, wuir);
+ }
+
+ return wuir;
+}
+
+static void at91_shdwc_dt_configure(struct platform_device *pdev)
+{
+ struct shdwc *shdw = platform_get_drvdata(pdev);
+ const struct reg_config *rcfg = shdw->rcfg;
+ struct device_node *np = pdev->dev.of_node;
+ u32 mode = 0, tmp, input;
+
+ if (!np) {
+ dev_err(&pdev->dev, "device node not found\n");
+ return;
+ }
+
+ if (!of_property_read_u32(np, "debounce-delay-us", &tmp))
+ mode |= AT91_SHDW_WKUPDBC(at91_shdwc_debouncer_value(pdev, tmp));
+
+ if (of_property_read_bool(np, "atmel,wakeup-rtc-timer"))
+ mode |= SHDW_RTCWKEN(&rcfg->shdwc);
+
+ if (of_property_read_bool(np, "atmel,wakeup-rtt-timer"))
+ mode |= SHDW_RTTWKEN(&rcfg->shdwc);
+
+ dev_dbg(&pdev->dev, "%s: mode = %#x\n", __func__, mode);
+ writel(mode, shdw->shdwc_base + AT91_SHDW_MR);
+
+ input = at91_shdwc_get_wakeup_input(pdev, np);
+ writel(input, shdw->shdwc_base + AT91_SHDW_WUIR);
+}
+
+static const struct reg_config sama5d2_reg_config = {
+ .shdwc = {
+ .wkup_pin_input = 0,
+ .mr_rtcwk_shift = 17,
+ .mr_rttwk_shift = SHDW_CFG_NOT_USED,
+ .sr_rtcwk_shift = 5,
+ .sr_rttwk_shift = SHDW_CFG_NOT_USED,
+ },
+ .pmc = {
+ .mckr = 0x30,
+ },
+};
+
+static const struct reg_config sam9x60_reg_config = {
+ .shdwc = {
+ .wkup_pin_input = 0,
+ .mr_rtcwk_shift = 17,
+ .mr_rttwk_shift = 16,
+ .sr_rtcwk_shift = 5,
+ .sr_rttwk_shift = 4,
+ },
+ .pmc = {
+ .mckr = 0x28,
+ },
+};
+
+static const struct of_device_id at91_shdwc_of_match[] = {
+ {
+ .compatible = "atmel,sama5d2-shdwc",
+ .data = &sama5d2_reg_config,
+ },
+ {
+ .compatible = "microchip,sam9x60-shdwc",
+ .data = &sam9x60_reg_config,
+ }, {
+ /*sentinel*/
+ }
+};
+MODULE_DEVICE_TABLE(of, at91_shdwc_of_match);
+
+static const struct of_device_id at91_pmc_ids[] = {
+ { .compatible = "atmel,sama5d2-pmc" },
+ { .compatible = "microchip,sam9x60-pmc" },
+ { /* Sentinel. */ }
+};
+
+static int __init at91_shdwc_probe(struct platform_device *pdev)
+{
+ struct resource *res;
+ const struct of_device_id *match;
+ struct device_node *np;
+ u32 ddr_type;
+ int ret;
+
+ if (!pdev->dev.of_node)
+ return -ENODEV;
+
+ if (at91_shdwc)
+ return -EBUSY;
+
+ at91_shdwc = devm_kzalloc(&pdev->dev, sizeof(*at91_shdwc), GFP_KERNEL);
+ if (!at91_shdwc)
+ return -ENOMEM;
+
+ platform_set_drvdata(pdev, at91_shdwc);
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ at91_shdwc->shdwc_base = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(at91_shdwc->shdwc_base)) {
+ dev_err(&pdev->dev, "Could not map reset controller address\n");
+ return PTR_ERR(at91_shdwc->shdwc_base);
+ }
+
+ match = of_match_node(at91_shdwc_of_match, pdev->dev.of_node);
+ at91_shdwc->rcfg = match->data;
+
+ at91_shdwc->sclk = devm_clk_get(&pdev->dev, NULL);
+ if (IS_ERR(at91_shdwc->sclk))
+ return PTR_ERR(at91_shdwc->sclk);
+
+ ret = clk_prepare_enable(at91_shdwc->sclk);
+ if (ret) {
+ dev_err(&pdev->dev, "Could not enable slow clock\n");
+ return ret;
+ }
+
+ at91_wakeup_status(pdev);
+
+ at91_shdwc_dt_configure(pdev);
+
+ np = of_find_matching_node(NULL, at91_pmc_ids);
+ if (!np) {
+ ret = -ENODEV;
+ goto clk_disable;
+ }
+
+ at91_shdwc->pmc_base = of_iomap(np, 0);
+ of_node_put(np);
+
+ if (!at91_shdwc->pmc_base) {
+ ret = -ENOMEM;
+ goto clk_disable;
+ }
+
+ np = of_find_compatible_node(NULL, NULL, "atmel,sama5d3-ddramc");
+ if (!np) {
+ ret = -ENODEV;
+ goto unmap;
+ }
+
+ at91_shdwc->mpddrc_base = of_iomap(np, 0);
+ of_node_put(np);
+
+ if (!at91_shdwc->mpddrc_base) {
+ ret = -ENOMEM;
+ goto unmap;
+ }
+
+ pm_power_off = at91_poweroff;
+
+ ddr_type = readl(at91_shdwc->mpddrc_base + AT91_DDRSDRC_MDR) &
+ AT91_DDRSDRC_MD;
+ if (ddr_type != AT91_DDRSDRC_MD_LPDDR2 &&
+ ddr_type != AT91_DDRSDRC_MD_LPDDR3) {
+ iounmap(at91_shdwc->mpddrc_base);
+ at91_shdwc->mpddrc_base = NULL;
+ }
+
+ return 0;
+
+unmap:
+ iounmap(at91_shdwc->pmc_base);
+clk_disable:
+ clk_disable_unprepare(at91_shdwc->sclk);
+
+ return ret;
+}
+
+static int __exit at91_shdwc_remove(struct platform_device *pdev)
+{
+ struct shdwc *shdw = platform_get_drvdata(pdev);
+
+ if (pm_power_off == at91_poweroff)
+ pm_power_off = NULL;
+
+ /* Reset values to disable wake-up features */
+ writel(0, shdw->shdwc_base + AT91_SHDW_MR);
+ writel(0, shdw->shdwc_base + AT91_SHDW_WUIR);
+
+ if (shdw->mpddrc_base)
+ iounmap(shdw->mpddrc_base);
+ iounmap(shdw->pmc_base);
+
+ clk_disable_unprepare(shdw->sclk);
+
+ return 0;
+}
+
+static struct platform_driver at91_shdwc_driver = {
+ .remove = __exit_p(at91_shdwc_remove),
+ .driver = {
+ .name = "at91-shdwc",
+ .of_match_table = at91_shdwc_of_match,
+ },
+};
+module_platform_driver_probe(at91_shdwc_driver, at91_shdwc_probe);
+
+MODULE_AUTHOR("Nicolas Ferre <nicolas.ferre@atmel.com>");
+MODULE_DESCRIPTION("Atmel shutdown controller driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/power/reset/axxia-reset.c b/drivers/power/reset/axxia-reset.c
new file mode 100644
index 000000000..f7b40be5d
--- /dev/null
+++ b/drivers/power/reset/axxia-reset.c
@@ -0,0 +1,88 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Reset driver for Axxia devices
+ *
+ * Copyright (C) 2014 LSI
+ */
+#include <linux/init.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/notifier.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/reboot.h>
+#include <linux/regmap.h>
+
+#define SC_CRIT_WRITE_KEY 0x1000
+#define SC_LATCH_ON_RESET 0x1004
+#define SC_RESET_CONTROL 0x1008
+#define RSTCTL_RST_ZERO (1<<3)
+#define RSTCTL_RST_FAB (1<<2)
+#define RSTCTL_RST_CHIP (1<<1)
+#define RSTCTL_RST_SYS (1<<0)
+#define SC_EFUSE_INT_STATUS 0x180c
+#define EFUSE_READ_DONE (1<<31)
+
+static struct regmap *syscon;
+
+static int axxia_restart_handler(struct notifier_block *this,
+ unsigned long mode, void *cmd)
+{
+ /* Access Key (0xab) */
+ regmap_write(syscon, SC_CRIT_WRITE_KEY, 0xab);
+ /* Select internal boot from 0xffff0000 */
+ regmap_write(syscon, SC_LATCH_ON_RESET, 0x00000040);
+ /* Assert ResetReadDone (to avoid hanging in boot ROM) */
+ regmap_write(syscon, SC_EFUSE_INT_STATUS, EFUSE_READ_DONE);
+ /* Assert chip reset */
+ regmap_update_bits(syscon, SC_RESET_CONTROL,
+ RSTCTL_RST_CHIP, RSTCTL_RST_CHIP);
+
+ return NOTIFY_DONE;
+}
+
+static struct notifier_block axxia_restart_nb = {
+ .notifier_call = axxia_restart_handler,
+ .priority = 128,
+};
+
+static int axxia_reset_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ int err;
+
+ syscon = syscon_regmap_lookup_by_phandle(dev->of_node, "syscon");
+ if (IS_ERR(syscon)) {
+ pr_err("%pOFn: syscon lookup failed\n", dev->of_node);
+ return PTR_ERR(syscon);
+ }
+
+ err = register_restart_handler(&axxia_restart_nb);
+ if (err)
+ dev_err(dev, "cannot register restart handler (err=%d)\n", err);
+
+ return err;
+}
+
+static const struct of_device_id of_axxia_reset_match[] = {
+ { .compatible = "lsi,axm55xx-reset", },
+ {},
+};
+MODULE_DEVICE_TABLE(of, of_axxia_reset_match);
+
+static struct platform_driver axxia_reset_driver = {
+ .probe = axxia_reset_probe,
+ .driver = {
+ .name = "axxia-reset",
+ .of_match_table = of_match_ptr(of_axxia_reset_match),
+ },
+};
+
+static int __init axxia_reset_init(void)
+{
+ return platform_driver_register(&axxia_reset_driver);
+}
+device_initcall(axxia_reset_init);
diff --git a/drivers/power/reset/brcm-kona-reset.c b/drivers/power/reset/brcm-kona-reset.c
new file mode 100644
index 000000000..8eaa959d8
--- /dev/null
+++ b/drivers/power/reset/brcm-kona-reset.c
@@ -0,0 +1,73 @@
+/*
+ * Copyright (C) 2016 Broadcom
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/io.h>
+#include <linux/of_address.h>
+#include <linux/of_platform.h>
+#include <linux/reboot.h>
+
+#define RSTMGR_REG_WR_ACCESS_OFFSET 0
+#define RSTMGR_REG_CHIP_SOFT_RST_OFFSET 4
+
+#define RSTMGR_WR_PASSWORD 0xa5a5
+#define RSTMGR_WR_PASSWORD_SHIFT 8
+#define RSTMGR_WR_ACCESS_ENABLE 1
+
+static void __iomem *kona_reset_base;
+
+static int kona_reset_handler(struct notifier_block *this,
+ unsigned long mode, void *cmd)
+{
+ /*
+ * A soft reset is triggered by writing a 0 to bit 0 of the soft reset
+ * register. To write to that register we must first write the password
+ * and the enable bit in the write access enable register.
+ */
+ writel((RSTMGR_WR_PASSWORD << RSTMGR_WR_PASSWORD_SHIFT) |
+ RSTMGR_WR_ACCESS_ENABLE,
+ kona_reset_base + RSTMGR_REG_WR_ACCESS_OFFSET);
+ writel(0, kona_reset_base + RSTMGR_REG_CHIP_SOFT_RST_OFFSET);
+
+ return NOTIFY_DONE;
+}
+
+static struct notifier_block kona_reset_nb = {
+ .notifier_call = kona_reset_handler,
+ .priority = 128,
+};
+
+static int kona_reset_probe(struct platform_device *pdev)
+{
+ struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+
+ kona_reset_base = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(kona_reset_base))
+ return PTR_ERR(kona_reset_base);
+
+ return register_restart_handler(&kona_reset_nb);
+}
+
+static const struct of_device_id of_match[] = {
+ { .compatible = "brcm,bcm21664-resetmgr" },
+ {},
+};
+
+static struct platform_driver bcm_kona_reset_driver = {
+ .probe = kona_reset_probe,
+ .driver = {
+ .name = "brcm-kona-reset",
+ .of_match_table = of_match,
+ },
+};
+
+builtin_platform_driver(bcm_kona_reset_driver);
diff --git a/drivers/power/reset/brcmstb-reboot.c b/drivers/power/reset/brcmstb-reboot.c
new file mode 100644
index 000000000..884b53c48
--- /dev/null
+++ b/drivers/power/reset/brcmstb-reboot.c
@@ -0,0 +1,156 @@
+/*
+ * Copyright (C) 2013 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/bitops.h>
+#include <linux/device.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/jiffies.h>
+#include <linux/notifier.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/printk.h>
+#include <linux/reboot.h>
+#include <linux/regmap.h>
+#include <linux/smp.h>
+#include <linux/mfd/syscon.h>
+
+#define RESET_SOURCE_ENABLE_REG 1
+#define SW_MASTER_RESET_REG 2
+
+static struct regmap *regmap;
+static u32 rst_src_en;
+static u32 sw_mstr_rst;
+
+struct reset_reg_mask {
+ u32 rst_src_en_mask;
+ u32 sw_mstr_rst_mask;
+};
+
+static const struct reset_reg_mask *reset_masks;
+
+static int brcmstb_restart_handler(struct notifier_block *this,
+ unsigned long mode, void *cmd)
+{
+ int rc;
+ u32 tmp;
+
+ rc = regmap_write(regmap, rst_src_en, reset_masks->rst_src_en_mask);
+ if (rc) {
+ pr_err("failed to write rst_src_en (%d)\n", rc);
+ return NOTIFY_DONE;
+ }
+
+ rc = regmap_read(regmap, rst_src_en, &tmp);
+ if (rc) {
+ pr_err("failed to read rst_src_en (%d)\n", rc);
+ return NOTIFY_DONE;
+ }
+
+ rc = regmap_write(regmap, sw_mstr_rst, reset_masks->sw_mstr_rst_mask);
+ if (rc) {
+ pr_err("failed to write sw_mstr_rst (%d)\n", rc);
+ return NOTIFY_DONE;
+ }
+
+ rc = regmap_read(regmap, sw_mstr_rst, &tmp);
+ if (rc) {
+ pr_err("failed to read sw_mstr_rst (%d)\n", rc);
+ return NOTIFY_DONE;
+ }
+
+ while (1)
+ ;
+
+ return NOTIFY_DONE;
+}
+
+static struct notifier_block brcmstb_restart_nb = {
+ .notifier_call = brcmstb_restart_handler,
+ .priority = 128,
+};
+
+static const struct reset_reg_mask reset_bits_40nm = {
+ .rst_src_en_mask = BIT(0),
+ .sw_mstr_rst_mask = BIT(0),
+};
+
+static const struct reset_reg_mask reset_bits_65nm = {
+ .rst_src_en_mask = BIT(3),
+ .sw_mstr_rst_mask = BIT(31),
+};
+
+static const struct of_device_id of_match[] = {
+ { .compatible = "brcm,brcmstb-reboot", .data = &reset_bits_40nm },
+ { .compatible = "brcm,bcm7038-reboot", .data = &reset_bits_65nm },
+ {},
+};
+
+static int brcmstb_reboot_probe(struct platform_device *pdev)
+{
+ int rc;
+ struct device_node *np = pdev->dev.of_node;
+ const struct of_device_id *of_id;
+
+ of_id = of_match_node(of_match, np);
+ if (!of_id) {
+ pr_err("failed to look up compatible string\n");
+ return -EINVAL;
+ }
+ reset_masks = of_id->data;
+
+ regmap = syscon_regmap_lookup_by_phandle(np, "syscon");
+ if (IS_ERR(regmap)) {
+ pr_err("failed to get syscon phandle\n");
+ return -EINVAL;
+ }
+
+ rc = of_property_read_u32_index(np, "syscon", RESET_SOURCE_ENABLE_REG,
+ &rst_src_en);
+ if (rc) {
+ pr_err("can't get rst_src_en offset (%d)\n", rc);
+ return -EINVAL;
+ }
+
+ rc = of_property_read_u32_index(np, "syscon", SW_MASTER_RESET_REG,
+ &sw_mstr_rst);
+ if (rc) {
+ pr_err("can't get sw_mstr_rst offset (%d)\n", rc);
+ return -EINVAL;
+ }
+
+ rc = register_restart_handler(&brcmstb_restart_nb);
+ if (rc)
+ dev_err(&pdev->dev,
+ "cannot register restart handler (err=%d)\n", rc);
+
+ return rc;
+}
+
+static struct platform_driver brcmstb_reboot_driver = {
+ .probe = brcmstb_reboot_probe,
+ .driver = {
+ .name = "brcmstb-reboot",
+ .of_match_table = of_match,
+ },
+};
+
+static int __init brcmstb_reboot_init(void)
+{
+ return platform_driver_probe(&brcmstb_reboot_driver,
+ brcmstb_reboot_probe);
+}
+subsys_initcall(brcmstb_reboot_init);
diff --git a/drivers/power/reset/gemini-poweroff.c b/drivers/power/reset/gemini-poweroff.c
new file mode 100644
index 000000000..b7f7a8225
--- /dev/null
+++ b/drivers/power/reset/gemini-poweroff.c
@@ -0,0 +1,175 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Gemini power management controller
+ * Copyright (C) 2017 Linus Walleij <linus.walleij@linaro.org>
+ *
+ * Inspired by code from the SL3516 board support by Jason Lee
+ * Inspired by code from Janos Laube <janos.dev@gmail.com>
+ */
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/pm.h>
+#include <linux/bitops.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/reboot.h>
+
+#define GEMINI_PWC_ID 0x00010500
+#define GEMINI_PWC_IDREG 0x00
+#define GEMINI_PWC_CTRLREG 0x04
+#define GEMINI_PWC_STATREG 0x08
+
+#define GEMINI_CTRL_SHUTDOWN BIT(0)
+#define GEMINI_CTRL_ENABLE BIT(1)
+#define GEMINI_CTRL_IRQ_CLR BIT(2)
+
+#define GEMINI_STAT_CIR BIT(4)
+#define GEMINI_STAT_RTC BIT(5)
+#define GEMINI_STAT_POWERBUTTON BIT(6)
+
+struct gemini_powercon {
+ struct device *dev;
+ void __iomem *base;
+};
+
+static irqreturn_t gemini_powerbutton_interrupt(int irq, void *data)
+{
+ struct gemini_powercon *gpw = data;
+ u32 val;
+
+ /* ACK the IRQ */
+ val = readl(gpw->base + GEMINI_PWC_CTRLREG);
+ val |= GEMINI_CTRL_IRQ_CLR;
+ writel(val, gpw->base + GEMINI_PWC_CTRLREG);
+
+ val = readl(gpw->base + GEMINI_PWC_STATREG);
+ val &= 0x70U;
+ switch (val) {
+ case GEMINI_STAT_CIR:
+ /*
+ * We do not yet have a driver for the infrared
+ * controller so it can cause spurious poweroff
+ * events. Ignore those for now.
+ */
+ dev_info(gpw->dev, "infrared poweroff - ignored\n");
+ break;
+ case GEMINI_STAT_RTC:
+ dev_info(gpw->dev, "RTC poweroff\n");
+ orderly_poweroff(true);
+ break;
+ case GEMINI_STAT_POWERBUTTON:
+ dev_info(gpw->dev, "poweroff button pressed\n");
+ orderly_poweroff(true);
+ break;
+ default:
+ dev_info(gpw->dev, "other power management IRQ\n");
+ break;
+ }
+
+ return IRQ_HANDLED;
+}
+
+/* This callback needs this static local as it has void as argument */
+static struct gemini_powercon *gpw_poweroff;
+
+static void gemini_poweroff(void)
+{
+ struct gemini_powercon *gpw = gpw_poweroff;
+ u32 val;
+
+ dev_crit(gpw->dev, "Gemini power off\n");
+ val = readl(gpw->base + GEMINI_PWC_CTRLREG);
+ val |= GEMINI_CTRL_ENABLE | GEMINI_CTRL_IRQ_CLR;
+ writel(val, gpw->base + GEMINI_PWC_CTRLREG);
+
+ val &= ~GEMINI_CTRL_ENABLE;
+ val |= GEMINI_CTRL_SHUTDOWN;
+ writel(val, gpw->base + GEMINI_PWC_CTRLREG);
+}
+
+static int gemini_poweroff_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct resource *res;
+ struct gemini_powercon *gpw;
+ u32 val;
+ int irq;
+ int ret;
+
+ gpw = devm_kzalloc(dev, sizeof(*gpw), GFP_KERNEL);
+ if (!gpw)
+ return -ENOMEM;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ gpw->base = devm_ioremap_resource(dev, res);
+ if (IS_ERR(gpw->base))
+ return PTR_ERR(gpw->base);
+
+ irq = platform_get_irq(pdev, 0);
+ if (irq < 0)
+ return irq;
+
+ gpw->dev = dev;
+
+ val = readl(gpw->base + GEMINI_PWC_IDREG);
+ val &= 0xFFFFFF00U;
+ if (val != GEMINI_PWC_ID) {
+ dev_err(dev, "wrong power controller ID: %08x\n",
+ val);
+ return -ENODEV;
+ }
+
+ /*
+ * Enable the power controller. This is crucial on Gemini
+ * systems: if this is not done, pressing the power button
+ * will result in unconditional poweroff without any warning.
+ * This makes the kernel handle the poweroff.
+ */
+ val = readl(gpw->base + GEMINI_PWC_CTRLREG);
+ val |= GEMINI_CTRL_ENABLE;
+ writel(val, gpw->base + GEMINI_PWC_CTRLREG);
+
+ /* Clear the IRQ */
+ val = readl(gpw->base + GEMINI_PWC_CTRLREG);
+ val |= GEMINI_CTRL_IRQ_CLR;
+ writel(val, gpw->base + GEMINI_PWC_CTRLREG);
+
+ /* Wait for this to clear */
+ val = readl(gpw->base + GEMINI_PWC_STATREG);
+ while (val & 0x70U)
+ val = readl(gpw->base + GEMINI_PWC_STATREG);
+
+ /* Clear the IRQ again */
+ val = readl(gpw->base + GEMINI_PWC_CTRLREG);
+ val |= GEMINI_CTRL_IRQ_CLR;
+ writel(val, gpw->base + GEMINI_PWC_CTRLREG);
+
+ ret = devm_request_irq(dev, irq, gemini_powerbutton_interrupt, 0,
+ "poweroff", gpw);
+ if (ret)
+ return ret;
+
+ pm_power_off = gemini_poweroff;
+ gpw_poweroff = gpw;
+
+ dev_info(dev, "Gemini poweroff driver registered\n");
+
+ return 0;
+}
+
+static const struct of_device_id gemini_poweroff_of_match[] = {
+ {
+ .compatible = "cortina,gemini-power-controller",
+ },
+ {}
+};
+
+static struct platform_driver gemini_poweroff_driver = {
+ .probe = gemini_poweroff_probe,
+ .driver = {
+ .name = "gemini-poweroff",
+ .of_match_table = gemini_poweroff_of_match,
+ },
+};
+builtin_platform_driver(gemini_poweroff_driver);
diff --git a/drivers/power/reset/gpio-poweroff.c b/drivers/power/reset/gpio-poweroff.c
new file mode 100644
index 000000000..1c5af2fef
--- /dev/null
+++ b/drivers/power/reset/gpio-poweroff.c
@@ -0,0 +1,109 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Toggles a GPIO pin to power down a device
+ *
+ * Jamie Lentin <jm@lentin.co.uk>
+ * Andrew Lunn <andrew@lunn.ch>
+ *
+ * Copyright (C) 2012 Jamie Lentin
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+#include <linux/gpio/consumer.h>
+#include <linux/of_platform.h>
+#include <linux/module.h>
+
+#define DEFAULT_TIMEOUT_MS 3000
+/*
+ * Hold configuration here, cannot be more than one instance of the driver
+ * since pm_power_off itself is global.
+ */
+static struct gpio_desc *reset_gpio;
+static u32 timeout = DEFAULT_TIMEOUT_MS;
+static u32 active_delay = 100;
+static u32 inactive_delay = 100;
+
+static void gpio_poweroff_do_poweroff(void)
+{
+ BUG_ON(!reset_gpio);
+
+ /* drive it active, also inactive->active edge */
+ gpiod_direction_output(reset_gpio, 1);
+ mdelay(active_delay);
+
+ /* drive inactive, also active->inactive edge */
+ gpiod_set_value_cansleep(reset_gpio, 0);
+ mdelay(inactive_delay);
+
+ /* drive it active, also inactive->active edge */
+ gpiod_set_value_cansleep(reset_gpio, 1);
+
+ /* give it some time */
+ mdelay(timeout);
+
+ WARN_ON(1);
+}
+
+static int gpio_poweroff_probe(struct platform_device *pdev)
+{
+ bool input = false;
+ enum gpiod_flags flags;
+
+ /* If a pm_power_off function has already been added, leave it alone */
+ if (pm_power_off != NULL) {
+ dev_err(&pdev->dev,
+ "%s: pm_power_off function already registered\n",
+ __func__);
+ return -EBUSY;
+ }
+
+ input = device_property_read_bool(&pdev->dev, "input");
+ if (input)
+ flags = GPIOD_IN;
+ else
+ flags = GPIOD_OUT_LOW;
+
+ device_property_read_u32(&pdev->dev, "active-delay-ms", &active_delay);
+ device_property_read_u32(&pdev->dev, "inactive-delay-ms",
+ &inactive_delay);
+ device_property_read_u32(&pdev->dev, "timeout-ms", &timeout);
+
+ reset_gpio = devm_gpiod_get(&pdev->dev, NULL, flags);
+ if (IS_ERR(reset_gpio))
+ return PTR_ERR(reset_gpio);
+
+ pm_power_off = &gpio_poweroff_do_poweroff;
+ return 0;
+}
+
+static int gpio_poweroff_remove(struct platform_device *pdev)
+{
+ if (pm_power_off == &gpio_poweroff_do_poweroff)
+ pm_power_off = NULL;
+
+ return 0;
+}
+
+static const struct of_device_id of_gpio_poweroff_match[] = {
+ { .compatible = "gpio-poweroff", },
+ {},
+};
+MODULE_DEVICE_TABLE(of, of_gpio_poweroff_match);
+
+static struct platform_driver gpio_poweroff_driver = {
+ .probe = gpio_poweroff_probe,
+ .remove = gpio_poweroff_remove,
+ .driver = {
+ .name = "poweroff-gpio",
+ .of_match_table = of_gpio_poweroff_match,
+ },
+};
+
+module_platform_driver(gpio_poweroff_driver);
+
+MODULE_AUTHOR("Jamie Lentin <jm@lentin.co.uk>");
+MODULE_DESCRIPTION("GPIO poweroff driver");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:poweroff-gpio");
diff --git a/drivers/power/reset/gpio-restart.c b/drivers/power/reset/gpio-restart.c
new file mode 100644
index 000000000..5466eeea2
--- /dev/null
+++ b/drivers/power/reset/gpio-restart.c
@@ -0,0 +1,142 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Toggles a GPIO pin to restart a device
+ *
+ * Copyright (C) 2014 Google, Inc.
+ *
+ * Based on the gpio-poweroff driver.
+ */
+#include <linux/reboot.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+#include <linux/gpio/consumer.h>
+#include <linux/of_platform.h>
+#include <linux/module.h>
+
+struct gpio_restart {
+ struct gpio_desc *reset_gpio;
+ struct notifier_block restart_handler;
+ u32 active_delay_ms;
+ u32 inactive_delay_ms;
+ u32 wait_delay_ms;
+};
+
+static int gpio_restart_notify(struct notifier_block *this,
+ unsigned long mode, void *cmd)
+{
+ struct gpio_restart *gpio_restart =
+ container_of(this, struct gpio_restart, restart_handler);
+
+ /* drive it active, also inactive->active edge */
+ gpiod_direction_output(gpio_restart->reset_gpio, 1);
+ mdelay(gpio_restart->active_delay_ms);
+
+ /* drive inactive, also active->inactive edge */
+ gpiod_set_value(gpio_restart->reset_gpio, 0);
+ mdelay(gpio_restart->inactive_delay_ms);
+
+ /* drive it active, also inactive->active edge */
+ gpiod_set_value(gpio_restart->reset_gpio, 1);
+
+ /* give it some time */
+ mdelay(gpio_restart->wait_delay_ms);
+
+ WARN_ON(1);
+
+ return NOTIFY_DONE;
+}
+
+static int gpio_restart_probe(struct platform_device *pdev)
+{
+ struct gpio_restart *gpio_restart;
+ bool open_source = false;
+ u32 property;
+ int ret;
+
+ gpio_restart = devm_kzalloc(&pdev->dev, sizeof(*gpio_restart),
+ GFP_KERNEL);
+ if (!gpio_restart)
+ return -ENOMEM;
+
+ open_source = of_property_read_bool(pdev->dev.of_node, "open-source");
+
+ gpio_restart->reset_gpio = devm_gpiod_get(&pdev->dev, NULL,
+ open_source ? GPIOD_IN : GPIOD_OUT_LOW);
+ ret = PTR_ERR_OR_ZERO(gpio_restart->reset_gpio);
+ if (ret) {
+ if (ret != -EPROBE_DEFER)
+ dev_err(&pdev->dev, "Could not get reset GPIO\n");
+ return ret;
+ }
+
+ gpio_restart->restart_handler.notifier_call = gpio_restart_notify;
+ gpio_restart->restart_handler.priority = 129;
+ gpio_restart->active_delay_ms = 100;
+ gpio_restart->inactive_delay_ms = 100;
+ gpio_restart->wait_delay_ms = 3000;
+
+ ret = of_property_read_u32(pdev->dev.of_node, "priority", &property);
+ if (!ret) {
+ if (property > 255)
+ dev_err(&pdev->dev, "Invalid priority property: %u\n",
+ property);
+ else
+ gpio_restart->restart_handler.priority = property;
+ }
+
+ of_property_read_u32(pdev->dev.of_node, "active-delay",
+ &gpio_restart->active_delay_ms);
+ of_property_read_u32(pdev->dev.of_node, "inactive-delay",
+ &gpio_restart->inactive_delay_ms);
+ of_property_read_u32(pdev->dev.of_node, "wait-delay",
+ &gpio_restart->wait_delay_ms);
+
+ platform_set_drvdata(pdev, gpio_restart);
+
+ ret = register_restart_handler(&gpio_restart->restart_handler);
+ if (ret) {
+ dev_err(&pdev->dev, "%s: cannot register restart handler, %d\n",
+ __func__, ret);
+ return -ENODEV;
+ }
+
+ return 0;
+}
+
+static int gpio_restart_remove(struct platform_device *pdev)
+{
+ struct gpio_restart *gpio_restart = platform_get_drvdata(pdev);
+ int ret;
+
+ ret = unregister_restart_handler(&gpio_restart->restart_handler);
+ if (ret) {
+ dev_err(&pdev->dev,
+ "%s: cannot unregister restart handler, %d\n",
+ __func__, ret);
+ return -ENODEV;
+ }
+
+ return 0;
+}
+
+static const struct of_device_id of_gpio_restart_match[] = {
+ { .compatible = "gpio-restart", },
+ {},
+};
+
+static struct platform_driver gpio_restart_driver = {
+ .probe = gpio_restart_probe,
+ .remove = gpio_restart_remove,
+ .driver = {
+ .name = "restart-gpio",
+ .of_match_table = of_gpio_restart_match,
+ },
+};
+
+module_platform_driver(gpio_restart_driver);
+
+MODULE_AUTHOR("David Riley <davidriley@chromium.org>");
+MODULE_DESCRIPTION("GPIO restart driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/power/reset/hisi-reboot.c b/drivers/power/reset/hisi-reboot.c
new file mode 100644
index 000000000..0ba5fdce1
--- /dev/null
+++ b/drivers/power/reset/hisi-reboot.c
@@ -0,0 +1,79 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Hisilicon SoC reset code
+ *
+ * Copyright (c) 2014 Hisilicon Ltd.
+ * Copyright (c) 2014 Linaro Ltd.
+ *
+ * Author: Haojian Zhuang <haojian.zhuang@linaro.org>
+ */
+
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/notifier.h>
+#include <linux/of_address.h>
+#include <linux/platform_device.h>
+#include <linux/reboot.h>
+
+#include <asm/proc-fns.h>
+
+static void __iomem *base;
+static u32 reboot_offset;
+
+static int hisi_restart_handler(struct notifier_block *this,
+ unsigned long mode, void *cmd)
+{
+ writel_relaxed(0xdeadbeef, base + reboot_offset);
+
+ while (1)
+ cpu_do_idle();
+
+ return NOTIFY_DONE;
+}
+
+static struct notifier_block hisi_restart_nb = {
+ .notifier_call = hisi_restart_handler,
+ .priority = 128,
+};
+
+static int hisi_reboot_probe(struct platform_device *pdev)
+{
+ struct device_node *np = pdev->dev.of_node;
+ int err;
+
+ base = of_iomap(np, 0);
+ if (!base) {
+ WARN(1, "failed to map base address");
+ return -ENODEV;
+ }
+
+ if (of_property_read_u32(np, "reboot-offset", &reboot_offset) < 0) {
+ pr_err("failed to find reboot-offset property\n");
+ iounmap(base);
+ return -EINVAL;
+ }
+
+ err = register_restart_handler(&hisi_restart_nb);
+ if (err) {
+ dev_err(&pdev->dev, "cannot register restart handler (err=%d)\n",
+ err);
+ iounmap(base);
+ }
+
+ return err;
+}
+
+static const struct of_device_id hisi_reboot_of_match[] = {
+ { .compatible = "hisilicon,sysctrl" },
+ {}
+};
+
+static struct platform_driver hisi_reboot_driver = {
+ .probe = hisi_reboot_probe,
+ .driver = {
+ .name = "hisi-reboot",
+ .of_match_table = hisi_reboot_of_match,
+ },
+};
+module_platform_driver(hisi_reboot_driver);
diff --git a/drivers/power/reset/keystone-reset.c b/drivers/power/reset/keystone-reset.c
new file mode 100644
index 000000000..211eeef0c
--- /dev/null
+++ b/drivers/power/reset/keystone-reset.c
@@ -0,0 +1,172 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * TI keystone reboot driver
+ *
+ * Copyright (C) 2014 Texas Instruments Incorporated. https://www.ti.com/
+ *
+ * Author: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>
+ */
+
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/notifier.h>
+#include <linux/reboot.h>
+#include <linux/regmap.h>
+#include <linux/mfd/syscon.h>
+#include <linux/of_platform.h>
+
+#define RSTYPE_RG 0x0
+#define RSCTRL_RG 0x4
+#define RSCFG_RG 0x8
+#define RSISO_RG 0xc
+
+#define RSCTRL_KEY_MASK 0x0000ffff
+#define RSCTRL_RESET_MASK BIT(16)
+#define RSCTRL_KEY 0x5a69
+
+#define RSMUX_OMODE_MASK 0xe
+#define RSMUX_OMODE_RESET_ON 0xa
+#define RSMUX_OMODE_RESET_OFF 0x0
+#define RSMUX_LOCK_MASK 0x1
+#define RSMUX_LOCK_SET 0x1
+
+#define RSCFG_RSTYPE_SOFT 0x300f
+#define RSCFG_RSTYPE_HARD 0x0
+
+#define WDT_MUX_NUMBER 0x4
+
+static int rspll_offset;
+static struct regmap *pllctrl_regs;
+
+/**
+ * rsctrl_enable_rspll_write - enable access to RSCTRL, RSCFG
+ * To be able to access to RSCTRL, RSCFG registers
+ * we have to write a key before
+ */
+static inline int rsctrl_enable_rspll_write(void)
+{
+ return regmap_update_bits(pllctrl_regs, rspll_offset + RSCTRL_RG,
+ RSCTRL_KEY_MASK, RSCTRL_KEY);
+}
+
+static int rsctrl_restart_handler(struct notifier_block *this,
+ unsigned long mode, void *cmd)
+{
+ /* enable write access to RSTCTRL */
+ rsctrl_enable_rspll_write();
+
+ /* reset the SOC */
+ regmap_update_bits(pllctrl_regs, rspll_offset + RSCTRL_RG,
+ RSCTRL_RESET_MASK, 0);
+
+ return NOTIFY_DONE;
+}
+
+static struct notifier_block rsctrl_restart_nb = {
+ .notifier_call = rsctrl_restart_handler,
+ .priority = 128,
+};
+
+static const struct of_device_id rsctrl_of_match[] = {
+ {.compatible = "ti,keystone-reset", },
+ {},
+};
+
+static int rsctrl_probe(struct platform_device *pdev)
+{
+ int i;
+ int ret;
+ u32 val;
+ unsigned int rg;
+ u32 rsmux_offset;
+ struct regmap *devctrl_regs;
+ struct device *dev = &pdev->dev;
+ struct device_node *np = dev->of_node;
+
+ if (!np)
+ return -ENODEV;
+
+ /* get regmaps */
+ pllctrl_regs = syscon_regmap_lookup_by_phandle(np, "ti,syscon-pll");
+ if (IS_ERR(pllctrl_regs))
+ return PTR_ERR(pllctrl_regs);
+
+ devctrl_regs = syscon_regmap_lookup_by_phandle(np, "ti,syscon-dev");
+ if (IS_ERR(devctrl_regs))
+ return PTR_ERR(devctrl_regs);
+
+ ret = of_property_read_u32_index(np, "ti,syscon-pll", 1, &rspll_offset);
+ if (ret) {
+ dev_err(dev, "couldn't read the reset pll offset!\n");
+ return -EINVAL;
+ }
+
+ ret = of_property_read_u32_index(np, "ti,syscon-dev", 1, &rsmux_offset);
+ if (ret) {
+ dev_err(dev, "couldn't read the rsmux offset!\n");
+ return -EINVAL;
+ }
+
+ /* set soft/hard reset */
+ val = of_property_read_bool(np, "ti,soft-reset");
+ val = val ? RSCFG_RSTYPE_SOFT : RSCFG_RSTYPE_HARD;
+
+ ret = rsctrl_enable_rspll_write();
+ if (ret)
+ return ret;
+
+ ret = regmap_write(pllctrl_regs, rspll_offset + RSCFG_RG, val);
+ if (ret)
+ return ret;
+
+ /* disable a reset isolation for all module clocks */
+ ret = regmap_write(pllctrl_regs, rspll_offset + RSISO_RG, 0);
+ if (ret)
+ return ret;
+
+ /* enable a reset for watchdogs from wdt-list */
+ for (i = 0; i < WDT_MUX_NUMBER; i++) {
+ ret = of_property_read_u32_index(np, "ti,wdt-list", i, &val);
+ if (ret == -EOVERFLOW && !i) {
+ dev_err(dev, "ti,wdt-list property has to contain at"
+ "least one entry\n");
+ return -EINVAL;
+ } else if (ret) {
+ break;
+ }
+
+ if (val >= WDT_MUX_NUMBER) {
+ dev_err(dev, "ti,wdt-list property can contain "
+ "only numbers < 4\n");
+ return -EINVAL;
+ }
+
+ rg = rsmux_offset + val * 4;
+
+ ret = regmap_update_bits(devctrl_regs, rg, RSMUX_OMODE_MASK,
+ RSMUX_OMODE_RESET_ON |
+ RSMUX_LOCK_SET);
+ if (ret)
+ return ret;
+ }
+
+ ret = register_restart_handler(&rsctrl_restart_nb);
+ if (ret)
+ dev_err(dev, "cannot register restart handler (err=%d)\n", ret);
+
+ return ret;
+}
+
+static struct platform_driver rsctrl_driver = {
+ .probe = rsctrl_probe,
+ .driver = {
+ .name = KBUILD_MODNAME,
+ .of_match_table = rsctrl_of_match,
+ },
+};
+module_platform_driver(rsctrl_driver);
+
+MODULE_AUTHOR("Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>");
+MODULE_DESCRIPTION("Texas Instruments keystone reset driver");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:" KBUILD_MODNAME);
diff --git a/drivers/power/reset/linkstation-poweroff.c b/drivers/power/reset/linkstation-poweroff.c
new file mode 100644
index 000000000..39e89baed
--- /dev/null
+++ b/drivers/power/reset/linkstation-poweroff.c
@@ -0,0 +1,136 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * LinkStation power off restart driver
+ * Copyright (C) 2020 Daniel González Cabanelas <dgcbueu@gmail.com>
+ */
+
+#include <linux/module.h>
+#include <linux/notifier.h>
+#include <linux/of.h>
+#include <linux/of_mdio.h>
+#include <linux/of_platform.h>
+#include <linux/reboot.h>
+#include <linux/phy.h>
+
+/* Defines from the eth phy Marvell driver */
+#define MII_MARVELL_COPPER_PAGE 0
+#define MII_MARVELL_LED_PAGE 3
+#define MII_MARVELL_WOL_PAGE 17
+#define MII_MARVELL_PHY_PAGE 22
+
+#define MII_PHY_LED_CTRL 16
+#define MII_88E1318S_PHY_LED_TCR 18
+#define MII_88E1318S_PHY_WOL_CTRL 16
+#define MII_M1011_IEVENT 19
+
+#define MII_88E1318S_PHY_LED_TCR_INTn_ENABLE BIT(7)
+#define MII_88E1318S_PHY_LED_TCR_FORCE_INT BIT(15)
+#define MII_88E1318S_PHY_WOL_CTRL_CLEAR_WOL_STATUS BIT(12)
+#define LED2_FORCE_ON (0x8 << 8)
+#define LEDMASK GENMASK(11,8)
+
+static struct phy_device *phydev;
+
+static void mvphy_reg_intn(u16 data)
+{
+ int rc = 0, saved_page;
+
+ saved_page = phy_select_page(phydev, MII_MARVELL_LED_PAGE);
+ if (saved_page < 0)
+ goto err;
+
+ /* Force manual LED2 control to let INTn work */
+ __phy_modify(phydev, MII_PHY_LED_CTRL, LEDMASK, LED2_FORCE_ON);
+
+ /* Set the LED[2]/INTn pin to the required state */
+ __phy_modify(phydev, MII_88E1318S_PHY_LED_TCR,
+ MII_88E1318S_PHY_LED_TCR_FORCE_INT,
+ MII_88E1318S_PHY_LED_TCR_INTn_ENABLE | data);
+
+ if (!data) {
+ /* Clear interrupts to ensure INTn won't be holded in high state */
+ __phy_write(phydev, MII_MARVELL_PHY_PAGE, MII_MARVELL_COPPER_PAGE);
+ __phy_read(phydev, MII_M1011_IEVENT);
+
+ /* If WOL was enabled and a magic packet was received before powering
+ * off, we won't be able to wake up by sending another magic packet.
+ * Clear WOL status.
+ */
+ __phy_write(phydev, MII_MARVELL_PHY_PAGE, MII_MARVELL_WOL_PAGE);
+ __phy_set_bits(phydev, MII_88E1318S_PHY_WOL_CTRL,
+ MII_88E1318S_PHY_WOL_CTRL_CLEAR_WOL_STATUS);
+ }
+err:
+ rc = phy_restore_page(phydev, saved_page, rc);
+ if (rc < 0)
+ dev_err(&phydev->mdio.dev, "Write register failed, %d\n", rc);
+}
+
+static int linkstation_reboot_notifier(struct notifier_block *nb,
+ unsigned long action, void *unused)
+{
+ if (action == SYS_RESTART)
+ mvphy_reg_intn(MII_88E1318S_PHY_LED_TCR_FORCE_INT);
+
+ return NOTIFY_DONE;
+}
+
+static struct notifier_block linkstation_reboot_nb = {
+ .notifier_call = linkstation_reboot_notifier,
+};
+
+static void linkstation_poweroff(void)
+{
+ unregister_reboot_notifier(&linkstation_reboot_nb);
+ mvphy_reg_intn(0);
+
+ kernel_restart("Power off");
+}
+
+static const struct of_device_id ls_poweroff_of_match[] = {
+ { .compatible = "buffalo,ls421d" },
+ { .compatible = "buffalo,ls421de" },
+ { },
+};
+
+static int __init linkstation_poweroff_init(void)
+{
+ struct mii_bus *bus;
+ struct device_node *dn;
+
+ dn = of_find_matching_node(NULL, ls_poweroff_of_match);
+ if (!dn)
+ return -ENODEV;
+ of_node_put(dn);
+
+ dn = of_find_node_by_name(NULL, "mdio");
+ if (!dn)
+ return -ENODEV;
+
+ bus = of_mdio_find_bus(dn);
+ of_node_put(dn);
+ if (!bus)
+ return -EPROBE_DEFER;
+
+ phydev = phy_find_first(bus);
+ if (!phydev)
+ return -EPROBE_DEFER;
+
+ register_reboot_notifier(&linkstation_reboot_nb);
+ pm_power_off = linkstation_poweroff;
+
+ return 0;
+}
+
+static void __exit linkstation_poweroff_exit(void)
+{
+ pm_power_off = NULL;
+ unregister_reboot_notifier(&linkstation_reboot_nb);
+}
+
+module_init(linkstation_poweroff_init);
+module_exit(linkstation_poweroff_exit);
+
+MODULE_AUTHOR("Daniel González Cabanelas <dgcbueu@gmail.com>");
+MODULE_DESCRIPTION("LinkStation power off driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/power/reset/ltc2952-poweroff.c b/drivers/power/reset/ltc2952-poweroff.c
new file mode 100644
index 000000000..d3844ae9e
--- /dev/null
+++ b/drivers/power/reset/ltc2952-poweroff.c
@@ -0,0 +1,313 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * LTC2952 (PowerPath) driver
+ *
+ * Copyright (C) 2014, Xsens Technologies BV <info@xsens.com>
+ * Maintainer: René Moll <linux@r-moll.nl>
+ *
+ * ----------------------------------------
+ * - Description
+ * ----------------------------------------
+ *
+ * This driver is to be used with an external PowerPath Controller (LTC2952).
+ * Its function is to determine when a external shut down is triggered
+ * and react by properly shutting down the system.
+ *
+ * This driver expects a device tree with a ltc2952 entry for pin mapping.
+ *
+ * ----------------------------------------
+ * - GPIO
+ * ----------------------------------------
+ *
+ * The following GPIOs are used:
+ * - trigger (input)
+ * A level change indicates the shut-down trigger. If it's state reverts
+ * within the time-out defined by trigger_delay, the shut down is not
+ * executed. If no pin is assigned to this input, the driver will start the
+ * watchdog toggle immediately. The chip will only power off the system if
+ * it is requested to do so through the kill line.
+ *
+ * - watchdog (output)
+ * Once a shut down is triggered, the driver will toggle this signal,
+ * with an internal (wde_interval) to stall the hardware shut down.
+ *
+ * - kill (output)
+ * The last action during shut down is triggering this signalling, such
+ * that the PowerPath Control will power down the hardware.
+ *
+ * ----------------------------------------
+ * - Interrupts
+ * ----------------------------------------
+ *
+ * The driver requires a non-shared, edge-triggered interrupt on the trigger
+ * GPIO.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/ktime.h>
+#include <linux/slab.h>
+#include <linux/kmod.h>
+#include <linux/module.h>
+#include <linux/mod_devicetable.h>
+#include <linux/gpio/consumer.h>
+#include <linux/reboot.h>
+
+struct ltc2952_poweroff {
+ struct hrtimer timer_trigger;
+ struct hrtimer timer_wde;
+
+ ktime_t trigger_delay;
+ ktime_t wde_interval;
+
+ struct device *dev;
+
+ struct gpio_desc *gpio_trigger;
+ struct gpio_desc *gpio_watchdog;
+ struct gpio_desc *gpio_kill;
+
+ bool kernel_panic;
+ struct notifier_block panic_notifier;
+};
+
+#define to_ltc2952(p, m) container_of(p, struct ltc2952_poweroff, m)
+
+/*
+ * This global variable is only needed for pm_power_off. We should
+ * remove it entirely once we don't need the global state anymore.
+ */
+static struct ltc2952_poweroff *ltc2952_data;
+
+/**
+ * ltc2952_poweroff_timer_wde - Timer callback
+ * Toggles the watchdog reset signal each wde_interval
+ *
+ * @timer: corresponding timer
+ *
+ * Returns HRTIMER_RESTART for an infinite loop which will only stop when the
+ * machine actually shuts down
+ */
+static enum hrtimer_restart ltc2952_poweroff_timer_wde(struct hrtimer *timer)
+{
+ ktime_t now;
+ int state;
+ struct ltc2952_poweroff *data = to_ltc2952(timer, timer_wde);
+
+ if (data->kernel_panic)
+ return HRTIMER_NORESTART;
+
+ state = gpiod_get_value(data->gpio_watchdog);
+ gpiod_set_value(data->gpio_watchdog, !state);
+
+ now = hrtimer_cb_get_time(timer);
+ hrtimer_forward(timer, now, data->wde_interval);
+
+ return HRTIMER_RESTART;
+}
+
+static void ltc2952_poweroff_start_wde(struct ltc2952_poweroff *data)
+{
+ hrtimer_start(&data->timer_wde, data->wde_interval, HRTIMER_MODE_REL);
+}
+
+static enum hrtimer_restart
+ltc2952_poweroff_timer_trigger(struct hrtimer *timer)
+{
+ struct ltc2952_poweroff *data = to_ltc2952(timer, timer_trigger);
+
+ ltc2952_poweroff_start_wde(data);
+ dev_info(data->dev, "executing shutdown\n");
+ orderly_poweroff(true);
+
+ return HRTIMER_NORESTART;
+}
+
+/**
+ * ltc2952_poweroff_handler - Interrupt handler
+ * Triggered each time the trigger signal changes state and (de)activates a
+ * time-out (timer_trigger). Once the time-out is actually reached the shut
+ * down is executed.
+ *
+ * @irq: IRQ number
+ * @dev_id: pointer to the main data structure
+ */
+static irqreturn_t ltc2952_poweroff_handler(int irq, void *dev_id)
+{
+ struct ltc2952_poweroff *data = dev_id;
+
+ if (data->kernel_panic || hrtimer_active(&data->timer_wde)) {
+ /* shutdown is already triggered, nothing to do any more */
+ return IRQ_HANDLED;
+ }
+
+ if (gpiod_get_value(data->gpio_trigger)) {
+ hrtimer_start(&data->timer_trigger, data->trigger_delay,
+ HRTIMER_MODE_REL);
+ } else {
+ hrtimer_cancel(&data->timer_trigger);
+ }
+ return IRQ_HANDLED;
+}
+
+static void ltc2952_poweroff_kill(void)
+{
+ gpiod_set_value(ltc2952_data->gpio_kill, 1);
+}
+
+static void ltc2952_poweroff_default(struct ltc2952_poweroff *data)
+{
+ data->wde_interval = 300L * NSEC_PER_MSEC;
+ data->trigger_delay = ktime_set(2, 500L * NSEC_PER_MSEC);
+
+ hrtimer_init(&data->timer_trigger, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
+ data->timer_trigger.function = ltc2952_poweroff_timer_trigger;
+
+ hrtimer_init(&data->timer_wde, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
+ data->timer_wde.function = ltc2952_poweroff_timer_wde;
+}
+
+static int ltc2952_poweroff_init(struct platform_device *pdev)
+{
+ int ret;
+ struct ltc2952_poweroff *data = platform_get_drvdata(pdev);
+
+ ltc2952_poweroff_default(data);
+
+ data->gpio_watchdog = devm_gpiod_get(&pdev->dev, "watchdog",
+ GPIOD_OUT_LOW);
+ if (IS_ERR(data->gpio_watchdog)) {
+ ret = PTR_ERR(data->gpio_watchdog);
+ dev_err(&pdev->dev, "unable to claim gpio \"watchdog\"\n");
+ return ret;
+ }
+
+ data->gpio_kill = devm_gpiod_get(&pdev->dev, "kill", GPIOD_OUT_LOW);
+ if (IS_ERR(data->gpio_kill)) {
+ ret = PTR_ERR(data->gpio_kill);
+ dev_err(&pdev->dev, "unable to claim gpio \"kill\"\n");
+ return ret;
+ }
+
+ data->gpio_trigger = devm_gpiod_get_optional(&pdev->dev, "trigger",
+ GPIOD_IN);
+ if (IS_ERR(data->gpio_trigger)) {
+ /*
+ * It's not a problem if the trigger gpio isn't available, but
+ * it is worth a warning if its use was defined in the device
+ * tree.
+ */
+ dev_err(&pdev->dev, "unable to claim gpio \"trigger\"\n");
+ data->gpio_trigger = NULL;
+ }
+
+ if (devm_request_irq(&pdev->dev, gpiod_to_irq(data->gpio_trigger),
+ ltc2952_poweroff_handler,
+ (IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING),
+ "ltc2952-poweroff",
+ data)) {
+ /*
+ * Some things may have happened:
+ * - No trigger input was defined
+ * - Claiming the GPIO failed
+ * - We could not map to an IRQ
+ * - We couldn't register an interrupt handler
+ *
+ * None of these really are problems, but all of them
+ * disqualify the push button from controlling the power.
+ *
+ * It is therefore important to note that if the ltc2952
+ * detects a button press for long enough, it will still start
+ * its own powerdown window and cut the power on us if we don't
+ * start the watchdog trigger.
+ */
+ if (data->gpio_trigger) {
+ dev_warn(&pdev->dev,
+ "unable to configure the trigger interrupt\n");
+ devm_gpiod_put(&pdev->dev, data->gpio_trigger);
+ data->gpio_trigger = NULL;
+ }
+ dev_info(&pdev->dev,
+ "power down trigger input will not be used\n");
+ ltc2952_poweroff_start_wde(data);
+ }
+
+ return 0;
+}
+
+static int ltc2952_poweroff_notify_panic(struct notifier_block *nb,
+ unsigned long code, void *unused)
+{
+ struct ltc2952_poweroff *data = to_ltc2952(nb, panic_notifier);
+
+ data->kernel_panic = true;
+ return NOTIFY_DONE;
+}
+
+static int ltc2952_poweroff_probe(struct platform_device *pdev)
+{
+ int ret;
+ struct ltc2952_poweroff *data;
+
+ if (pm_power_off) {
+ dev_err(&pdev->dev, "pm_power_off already registered");
+ return -EBUSY;
+ }
+
+ data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
+
+ data->dev = &pdev->dev;
+ platform_set_drvdata(pdev, data);
+
+ ret = ltc2952_poweroff_init(pdev);
+ if (ret)
+ return ret;
+
+ /* TODO: remove ltc2952_data */
+ ltc2952_data = data;
+ pm_power_off = ltc2952_poweroff_kill;
+
+ data->panic_notifier.notifier_call = ltc2952_poweroff_notify_panic;
+ atomic_notifier_chain_register(&panic_notifier_list,
+ &data->panic_notifier);
+ dev_info(&pdev->dev, "probe successful\n");
+
+ return 0;
+}
+
+static int ltc2952_poweroff_remove(struct platform_device *pdev)
+{
+ struct ltc2952_poweroff *data = platform_get_drvdata(pdev);
+
+ pm_power_off = NULL;
+ hrtimer_cancel(&data->timer_trigger);
+ hrtimer_cancel(&data->timer_wde);
+ atomic_notifier_chain_unregister(&panic_notifier_list,
+ &data->panic_notifier);
+ return 0;
+}
+
+static const struct of_device_id of_ltc2952_poweroff_match[] = {
+ { .compatible = "lltc,ltc2952"},
+ {},
+};
+MODULE_DEVICE_TABLE(of, of_ltc2952_poweroff_match);
+
+static struct platform_driver ltc2952_poweroff_driver = {
+ .probe = ltc2952_poweroff_probe,
+ .remove = ltc2952_poweroff_remove,
+ .driver = {
+ .name = "ltc2952-poweroff",
+ .of_match_table = of_ltc2952_poweroff_match,
+ },
+};
+
+module_platform_driver(ltc2952_poweroff_driver);
+
+MODULE_AUTHOR("René Moll <rene.moll@xsens.com>");
+MODULE_DESCRIPTION("LTC PowerPath power-off driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/power/reset/msm-poweroff.c b/drivers/power/reset/msm-poweroff.c
new file mode 100644
index 000000000..0c439f83b
--- /dev/null
+++ b/drivers/power/reset/msm-poweroff.c
@@ -0,0 +1,71 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/* Copyright (c) 2013, The Linux Foundation. All rights reserved.
+ */
+
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/module.h>
+#include <linux/reboot.h>
+#include <linux/pm.h>
+
+static void __iomem *msm_ps_hold;
+static int deassert_pshold(struct notifier_block *nb, unsigned long action,
+ void *data)
+{
+ writel(0, msm_ps_hold);
+ mdelay(10000);
+
+ return NOTIFY_DONE;
+}
+
+static struct notifier_block restart_nb = {
+ .notifier_call = deassert_pshold,
+ .priority = 128,
+};
+
+static void do_msm_poweroff(void)
+{
+ deassert_pshold(&restart_nb, 0, NULL);
+}
+
+static int msm_restart_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct resource *mem;
+
+ mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ msm_ps_hold = devm_ioremap_resource(dev, mem);
+ if (IS_ERR(msm_ps_hold))
+ return PTR_ERR(msm_ps_hold);
+
+ register_restart_handler(&restart_nb);
+
+ pm_power_off = do_msm_poweroff;
+
+ return 0;
+}
+
+static const struct of_device_id of_msm_restart_match[] = {
+ { .compatible = "qcom,pshold", },
+ {},
+};
+MODULE_DEVICE_TABLE(of, of_msm_restart_match);
+
+static struct platform_driver msm_restart_driver = {
+ .probe = msm_restart_probe,
+ .driver = {
+ .name = "msm-restart",
+ .of_match_table = of_match_ptr(of_msm_restart_match),
+ },
+};
+
+static int __init msm_restart_init(void)
+{
+ return platform_driver_register(&msm_restart_driver);
+}
+device_initcall(msm_restart_init);
diff --git a/drivers/power/reset/mt6323-poweroff.c b/drivers/power/reset/mt6323-poweroff.c
new file mode 100644
index 000000000..d90e76fcb
--- /dev/null
+++ b/drivers/power/reset/mt6323-poweroff.c
@@ -0,0 +1,100 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Power off through MediaTek PMIC
+ *
+ * Copyright (C) 2018 MediaTek Inc.
+ *
+ * Author: Sean Wang <sean.wang@mediatek.com>
+ *
+ */
+
+#include <linux/err.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/mfd/mt6397/core.h>
+#include <linux/mfd/mt6397/rtc.h>
+
+struct mt6323_pwrc {
+ struct device *dev;
+ struct regmap *regmap;
+ u32 base;
+};
+
+static struct mt6323_pwrc *mt_pwrc;
+
+static void mt6323_do_pwroff(void)
+{
+ struct mt6323_pwrc *pwrc = mt_pwrc;
+ unsigned int val;
+ int ret;
+
+ regmap_write(pwrc->regmap, pwrc->base + RTC_BBPU, RTC_BBPU_KEY);
+ regmap_write(pwrc->regmap, pwrc->base + RTC_WRTGR_MT6323, 1);
+
+ ret = regmap_read_poll_timeout(pwrc->regmap,
+ pwrc->base + RTC_BBPU, val,
+ !(val & RTC_BBPU_CBUSY),
+ MTK_RTC_POLL_DELAY_US,
+ MTK_RTC_POLL_TIMEOUT);
+ if (ret)
+ dev_err(pwrc->dev, "failed to write BBPU: %d\n", ret);
+
+ /* Wait some time until system down, otherwise, notice with a warn */
+ mdelay(1000);
+
+ WARN_ONCE(1, "Unable to power off system\n");
+}
+
+static int mt6323_pwrc_probe(struct platform_device *pdev)
+{
+ struct mt6397_chip *mt6397_chip = dev_get_drvdata(pdev->dev.parent);
+ struct mt6323_pwrc *pwrc;
+ struct resource *res;
+
+ pwrc = devm_kzalloc(&pdev->dev, sizeof(*pwrc), GFP_KERNEL);
+ if (!pwrc)
+ return -ENOMEM;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res)
+ return -EINVAL;
+
+ pwrc->base = res->start;
+ pwrc->regmap = mt6397_chip->regmap;
+ pwrc->dev = &pdev->dev;
+ mt_pwrc = pwrc;
+
+ pm_power_off = &mt6323_do_pwroff;
+
+ return 0;
+}
+
+static int mt6323_pwrc_remove(struct platform_device *pdev)
+{
+ if (pm_power_off == &mt6323_do_pwroff)
+ pm_power_off = NULL;
+
+ return 0;
+}
+
+static const struct of_device_id mt6323_pwrc_dt_match[] = {
+ { .compatible = "mediatek,mt6323-pwrc" },
+ {},
+};
+MODULE_DEVICE_TABLE(of, mt6323_pwrc_dt_match);
+
+static struct platform_driver mt6323_pwrc_driver = {
+ .probe = mt6323_pwrc_probe,
+ .remove = mt6323_pwrc_remove,
+ .driver = {
+ .name = "mt6323-pwrc",
+ .of_match_table = mt6323_pwrc_dt_match,
+ },
+};
+
+module_platform_driver(mt6323_pwrc_driver);
+
+MODULE_DESCRIPTION("Poweroff driver for MT6323 PMIC");
+MODULE_AUTHOR("Sean Wang <sean.wang@mediatek.com>");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/power/reset/nvmem-reboot-mode.c b/drivers/power/reset/nvmem-reboot-mode.c
new file mode 100644
index 000000000..e229308d4
--- /dev/null
+++ b/drivers/power/reset/nvmem-reboot-mode.c
@@ -0,0 +1,76 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (c) Vaisala Oyj. All rights reserved.
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/of.h>
+#include <linux/nvmem-consumer.h>
+#include <linux/platform_device.h>
+#include <linux/reboot-mode.h>
+
+struct nvmem_reboot_mode {
+ struct reboot_mode_driver reboot;
+ struct nvmem_cell *cell;
+};
+
+static int nvmem_reboot_mode_write(struct reboot_mode_driver *reboot,
+ unsigned int magic)
+{
+ int ret;
+ struct nvmem_reboot_mode *nvmem_rbm;
+
+ nvmem_rbm = container_of(reboot, struct nvmem_reboot_mode, reboot);
+
+ ret = nvmem_cell_write(nvmem_rbm->cell, &magic, sizeof(magic));
+ if (ret < 0)
+ dev_err(reboot->dev, "update reboot mode bits failed\n");
+
+ return ret;
+}
+
+static int nvmem_reboot_mode_probe(struct platform_device *pdev)
+{
+ int ret;
+ struct nvmem_reboot_mode *nvmem_rbm;
+
+ nvmem_rbm = devm_kzalloc(&pdev->dev, sizeof(*nvmem_rbm), GFP_KERNEL);
+ if (!nvmem_rbm)
+ return -ENOMEM;
+
+ nvmem_rbm->reboot.dev = &pdev->dev;
+ nvmem_rbm->reboot.write = nvmem_reboot_mode_write;
+
+ nvmem_rbm->cell = devm_nvmem_cell_get(&pdev->dev, "reboot-mode");
+ if (IS_ERR(nvmem_rbm->cell)) {
+ dev_err(&pdev->dev, "failed to get the nvmem cell reboot-mode\n");
+ return PTR_ERR(nvmem_rbm->cell);
+ }
+
+ ret = devm_reboot_mode_register(&pdev->dev, &nvmem_rbm->reboot);
+ if (ret)
+ dev_err(&pdev->dev, "can't register reboot mode\n");
+
+ return ret;
+}
+
+static const struct of_device_id nvmem_reboot_mode_of_match[] = {
+ { .compatible = "nvmem-reboot-mode" },
+ {}
+};
+MODULE_DEVICE_TABLE(of, nvmem_reboot_mode_of_match);
+
+static struct platform_driver nvmem_reboot_mode_driver = {
+ .probe = nvmem_reboot_mode_probe,
+ .driver = {
+ .name = "nvmem-reboot-mode",
+ .of_match_table = nvmem_reboot_mode_of_match,
+ },
+};
+module_platform_driver(nvmem_reboot_mode_driver);
+
+MODULE_AUTHOR("Nandor Han <nandor.han@vaisala.com>");
+MODULE_DESCRIPTION("NVMEM reboot mode driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/power/reset/ocelot-reset.c b/drivers/power/reset/ocelot-reset.c
new file mode 100644
index 000000000..f74e1dbb4
--- /dev/null
+++ b/drivers/power/reset/ocelot-reset.c
@@ -0,0 +1,131 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Microsemi MIPS SoC reset driver
+ *
+ * License: Dual MIT/GPL
+ * Copyright (c) 2017 Microsemi Corporation
+ */
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/notifier.h>
+#include <linux/mfd/syscon.h>
+#include <linux/of_address.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/reboot.h>
+#include <linux/regmap.h>
+
+struct reset_props {
+ const char *syscon;
+ u32 protect_reg;
+ u32 vcore_protect;
+ u32 if_si_owner_bit;
+};
+
+struct ocelot_reset_context {
+ void __iomem *base;
+ struct regmap *cpu_ctrl;
+ const struct reset_props *props;
+ struct notifier_block restart_handler;
+};
+
+#define SOFT_CHIP_RST BIT(0)
+
+#define ICPU_CFG_CPU_SYSTEM_CTRL_GENERAL_CTRL 0x24
+#define IF_SI_OWNER_MASK GENMASK(1, 0)
+#define IF_SI_OWNER_SISL 0
+#define IF_SI_OWNER_SIBM 1
+#define IF_SI_OWNER_SIMC 2
+
+static int ocelot_restart_handle(struct notifier_block *this,
+ unsigned long mode, void *cmd)
+{
+ struct ocelot_reset_context *ctx = container_of(this, struct
+ ocelot_reset_context,
+ restart_handler);
+ u32 if_si_owner_bit = ctx->props->if_si_owner_bit;
+
+ /* Make sure the core is not protected from reset */
+ regmap_update_bits(ctx->cpu_ctrl, ctx->props->protect_reg,
+ ctx->props->vcore_protect, 0);
+
+ /* Make the SI back to boot mode */
+ regmap_update_bits(ctx->cpu_ctrl, ICPU_CFG_CPU_SYSTEM_CTRL_GENERAL_CTRL,
+ IF_SI_OWNER_MASK << if_si_owner_bit,
+ IF_SI_OWNER_SIBM << if_si_owner_bit);
+
+ pr_emerg("Resetting SoC\n");
+
+ writel(SOFT_CHIP_RST, ctx->base);
+
+ pr_emerg("Unable to restart system\n");
+ return NOTIFY_DONE;
+}
+
+static int ocelot_reset_probe(struct platform_device *pdev)
+{
+ struct ocelot_reset_context *ctx;
+ struct resource *res;
+
+ struct device *dev = &pdev->dev;
+ int err;
+
+ ctx = devm_kzalloc(&pdev->dev, sizeof(*ctx), GFP_KERNEL);
+ if (!ctx)
+ return -ENOMEM;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ ctx->base = devm_ioremap_resource(dev, res);
+ if (IS_ERR(ctx->base))
+ return PTR_ERR(ctx->base);
+
+ ctx->props = device_get_match_data(dev);
+
+ ctx->cpu_ctrl = syscon_regmap_lookup_by_compatible(ctx->props->syscon);
+ if (IS_ERR(ctx->cpu_ctrl)) {
+ dev_err(dev, "No syscon map: %s\n", ctx->props->syscon);
+ return PTR_ERR(ctx->cpu_ctrl);
+ }
+
+ ctx->restart_handler.notifier_call = ocelot_restart_handle;
+ ctx->restart_handler.priority = 192;
+ err = register_restart_handler(&ctx->restart_handler);
+ if (err)
+ dev_err(dev, "can't register restart notifier (err=%d)\n", err);
+
+ return err;
+}
+
+static const struct reset_props reset_props_ocelot = {
+ .syscon = "mscc,ocelot-cpu-syscon",
+ .protect_reg = 0x20,
+ .vcore_protect = BIT(2),
+ .if_si_owner_bit = 4,
+};
+
+static const struct reset_props reset_props_sparx5 = {
+ .syscon = "microchip,sparx5-cpu-syscon",
+ .protect_reg = 0x84,
+ .vcore_protect = BIT(10),
+ .if_si_owner_bit = 6,
+};
+
+static const struct of_device_id ocelot_reset_of_match[] = {
+ {
+ .compatible = "mscc,ocelot-chip-reset",
+ .data = &reset_props_ocelot
+ }, {
+ .compatible = "microchip,sparx5-chip-reset",
+ .data = &reset_props_sparx5
+ },
+ { /*sentinel*/ }
+};
+
+static struct platform_driver ocelot_reset_driver = {
+ .probe = ocelot_reset_probe,
+ .driver = {
+ .name = "ocelot-chip-reset",
+ .of_match_table = ocelot_reset_of_match,
+ },
+};
+builtin_platform_driver(ocelot_reset_driver);
diff --git a/drivers/power/reset/oxnas-restart.c b/drivers/power/reset/oxnas-restart.c
new file mode 100644
index 000000000..13090bec0
--- /dev/null
+++ b/drivers/power/reset/oxnas-restart.c
@@ -0,0 +1,233 @@
+// SPDX-License-Identifier: (GPL-2.0)
+/*
+ * oxnas SoC reset driver
+ * based on:
+ * Microsemi MIPS SoC reset driver
+ * and ox820_assert_system_reset() written by Ma Hajun <mahaijuns@gmail.com>
+ *
+ * Copyright (c) 2013 Ma Hajun <mahaijuns@gmail.com>
+ * Copyright (c) 2017 Microsemi Corporation
+ * Copyright (c) 2020 Daniel Golle <daniel@makrotopia.org>
+ */
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/notifier.h>
+#include <linux/mfd/syscon.h>
+#include <linux/of_address.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/reboot.h>
+#include <linux/regmap.h>
+
+/* bit numbers of reset control register */
+#define OX820_SYS_CTRL_RST_SCU 0
+#define OX820_SYS_CTRL_RST_COPRO 1
+#define OX820_SYS_CTRL_RST_ARM0 2
+#define OX820_SYS_CTRL_RST_ARM1 3
+#define OX820_SYS_CTRL_RST_USBHS 4
+#define OX820_SYS_CTRL_RST_USBHSPHYA 5
+#define OX820_SYS_CTRL_RST_MACA 6
+#define OX820_SYS_CTRL_RST_MAC OX820_SYS_CTRL_RST_MACA
+#define OX820_SYS_CTRL_RST_PCIEA 7
+#define OX820_SYS_CTRL_RST_SGDMA 8
+#define OX820_SYS_CTRL_RST_CIPHER 9
+#define OX820_SYS_CTRL_RST_DDR 10
+#define OX820_SYS_CTRL_RST_SATA 11
+#define OX820_SYS_CTRL_RST_SATA_LINK 12
+#define OX820_SYS_CTRL_RST_SATA_PHY 13
+#define OX820_SYS_CTRL_RST_PCIEPHY 14
+#define OX820_SYS_CTRL_RST_STATIC 15
+#define OX820_SYS_CTRL_RST_GPIO 16
+#define OX820_SYS_CTRL_RST_UART1 17
+#define OX820_SYS_CTRL_RST_UART2 18
+#define OX820_SYS_CTRL_RST_MISC 19
+#define OX820_SYS_CTRL_RST_I2S 20
+#define OX820_SYS_CTRL_RST_SD 21
+#define OX820_SYS_CTRL_RST_MACB 22
+#define OX820_SYS_CTRL_RST_PCIEB 23
+#define OX820_SYS_CTRL_RST_VIDEO 24
+#define OX820_SYS_CTRL_RST_DDR_PHY 25
+#define OX820_SYS_CTRL_RST_USBHSPHYB 26
+#define OX820_SYS_CTRL_RST_USBDEV 27
+#define OX820_SYS_CTRL_RST_ARMDBG 29
+#define OX820_SYS_CTRL_RST_PLLA 30
+#define OX820_SYS_CTRL_RST_PLLB 31
+
+/* bit numbers of clock control register */
+#define OX820_SYS_CTRL_CLK_COPRO 0
+#define OX820_SYS_CTRL_CLK_DMA 1
+#define OX820_SYS_CTRL_CLK_CIPHER 2
+#define OX820_SYS_CTRL_CLK_SD 3
+#define OX820_SYS_CTRL_CLK_SATA 4
+#define OX820_SYS_CTRL_CLK_I2S 5
+#define OX820_SYS_CTRL_CLK_USBHS 6
+#define OX820_SYS_CTRL_CLK_MACA 7
+#define OX820_SYS_CTRL_CLK_MAC OX820_SYS_CTRL_CLK_MACA
+#define OX820_SYS_CTRL_CLK_PCIEA 8
+#define OX820_SYS_CTRL_CLK_STATIC 9
+#define OX820_SYS_CTRL_CLK_MACB 10
+#define OX820_SYS_CTRL_CLK_PCIEB 11
+#define OX820_SYS_CTRL_CLK_REF600 12
+#define OX820_SYS_CTRL_CLK_USBDEV 13
+#define OX820_SYS_CTRL_CLK_DDR 14
+#define OX820_SYS_CTRL_CLK_DDRPHY 15
+#define OX820_SYS_CTRL_CLK_DDRCK 16
+
+/* Regmap offsets */
+#define OX820_CLK_SET_REGOFFSET 0x2c
+#define OX820_CLK_CLR_REGOFFSET 0x30
+#define OX820_RST_SET_REGOFFSET 0x34
+#define OX820_RST_CLR_REGOFFSET 0x38
+#define OX820_SECONDARY_SEL_REGOFFSET 0x14
+#define OX820_TERTIARY_SEL_REGOFFSET 0x8c
+#define OX820_QUATERNARY_SEL_REGOFFSET 0x94
+#define OX820_DEBUG_SEL_REGOFFSET 0x9c
+#define OX820_ALTERNATIVE_SEL_REGOFFSET 0xa4
+#define OX820_PULLUP_SEL_REGOFFSET 0xac
+#define OX820_SEC_SECONDARY_SEL_REGOFFSET 0x100014
+#define OX820_SEC_TERTIARY_SEL_REGOFFSET 0x10008c
+#define OX820_SEC_QUATERNARY_SEL_REGOFFSET 0x100094
+#define OX820_SEC_DEBUG_SEL_REGOFFSET 0x10009c
+#define OX820_SEC_ALTERNATIVE_SEL_REGOFFSET 0x1000a4
+#define OX820_SEC_PULLUP_SEL_REGOFFSET 0x1000ac
+
+struct oxnas_restart_context {
+ struct regmap *sys_ctrl;
+ struct notifier_block restart_handler;
+};
+
+static int ox820_restart_handle(struct notifier_block *this,
+ unsigned long mode, void *cmd)
+{
+ struct oxnas_restart_context *ctx = container_of(this, struct
+ oxnas_restart_context,
+ restart_handler);
+ u32 value;
+
+ /*
+ * Assert reset to cores as per power on defaults
+ * Don't touch the DDR interface as things will come to an impromptu
+ * stop NB Possibly should be asserting reset for PLLB, but there are
+ * timing concerns here according to the docs
+ */
+ value = BIT(OX820_SYS_CTRL_RST_COPRO) |
+ BIT(OX820_SYS_CTRL_RST_USBHS) |
+ BIT(OX820_SYS_CTRL_RST_USBHSPHYA) |
+ BIT(OX820_SYS_CTRL_RST_MACA) |
+ BIT(OX820_SYS_CTRL_RST_PCIEA) |
+ BIT(OX820_SYS_CTRL_RST_SGDMA) |
+ BIT(OX820_SYS_CTRL_RST_CIPHER) |
+ BIT(OX820_SYS_CTRL_RST_SATA) |
+ BIT(OX820_SYS_CTRL_RST_SATA_LINK) |
+ BIT(OX820_SYS_CTRL_RST_SATA_PHY) |
+ BIT(OX820_SYS_CTRL_RST_PCIEPHY) |
+ BIT(OX820_SYS_CTRL_RST_STATIC) |
+ BIT(OX820_SYS_CTRL_RST_UART1) |
+ BIT(OX820_SYS_CTRL_RST_UART2) |
+ BIT(OX820_SYS_CTRL_RST_MISC) |
+ BIT(OX820_SYS_CTRL_RST_I2S) |
+ BIT(OX820_SYS_CTRL_RST_SD) |
+ BIT(OX820_SYS_CTRL_RST_MACB) |
+ BIT(OX820_SYS_CTRL_RST_PCIEB) |
+ BIT(OX820_SYS_CTRL_RST_VIDEO) |
+ BIT(OX820_SYS_CTRL_RST_USBHSPHYB) |
+ BIT(OX820_SYS_CTRL_RST_USBDEV);
+
+ regmap_write(ctx->sys_ctrl, OX820_RST_SET_REGOFFSET, value);
+
+ /* Release reset to cores as per power on defaults */
+ regmap_write(ctx->sys_ctrl, OX820_RST_CLR_REGOFFSET,
+ BIT(OX820_SYS_CTRL_RST_GPIO));
+
+ /*
+ * Disable clocks to cores as per power-on defaults - must leave DDR
+ * related clocks enabled otherwise we'll stop rather abruptly.
+ */
+ value = BIT(OX820_SYS_CTRL_CLK_COPRO) |
+ BIT(OX820_SYS_CTRL_CLK_DMA) |
+ BIT(OX820_SYS_CTRL_CLK_CIPHER) |
+ BIT(OX820_SYS_CTRL_CLK_SD) |
+ BIT(OX820_SYS_CTRL_CLK_SATA) |
+ BIT(OX820_SYS_CTRL_CLK_I2S) |
+ BIT(OX820_SYS_CTRL_CLK_USBHS) |
+ BIT(OX820_SYS_CTRL_CLK_MAC) |
+ BIT(OX820_SYS_CTRL_CLK_PCIEA) |
+ BIT(OX820_SYS_CTRL_CLK_STATIC) |
+ BIT(OX820_SYS_CTRL_CLK_MACB) |
+ BIT(OX820_SYS_CTRL_CLK_PCIEB) |
+ BIT(OX820_SYS_CTRL_CLK_REF600) |
+ BIT(OX820_SYS_CTRL_CLK_USBDEV);
+
+ regmap_write(ctx->sys_ctrl, OX820_CLK_CLR_REGOFFSET, value);
+
+ /* Enable clocks to cores as per power-on defaults */
+
+ /* Set sys-control pin mux'ing as per power-on defaults */
+ regmap_write(ctx->sys_ctrl, OX820_SECONDARY_SEL_REGOFFSET, 0);
+ regmap_write(ctx->sys_ctrl, OX820_TERTIARY_SEL_REGOFFSET, 0);
+ regmap_write(ctx->sys_ctrl, OX820_QUATERNARY_SEL_REGOFFSET, 0);
+ regmap_write(ctx->sys_ctrl, OX820_DEBUG_SEL_REGOFFSET, 0);
+ regmap_write(ctx->sys_ctrl, OX820_ALTERNATIVE_SEL_REGOFFSET, 0);
+ regmap_write(ctx->sys_ctrl, OX820_PULLUP_SEL_REGOFFSET, 0);
+
+ regmap_write(ctx->sys_ctrl, OX820_SEC_SECONDARY_SEL_REGOFFSET, 0);
+ regmap_write(ctx->sys_ctrl, OX820_SEC_TERTIARY_SEL_REGOFFSET, 0);
+ regmap_write(ctx->sys_ctrl, OX820_SEC_QUATERNARY_SEL_REGOFFSET, 0);
+ regmap_write(ctx->sys_ctrl, OX820_SEC_DEBUG_SEL_REGOFFSET, 0);
+ regmap_write(ctx->sys_ctrl, OX820_SEC_ALTERNATIVE_SEL_REGOFFSET, 0);
+ regmap_write(ctx->sys_ctrl, OX820_SEC_PULLUP_SEL_REGOFFSET, 0);
+
+ /*
+ * No need to save any state, as the ROM loader can determine whether
+ * reset is due to power cycling or programatic action, just hit the
+ * (self-clearing) CPU reset bit of the block reset register
+ */
+ value =
+ BIT(OX820_SYS_CTRL_RST_SCU) |
+ BIT(OX820_SYS_CTRL_RST_ARM0) |
+ BIT(OX820_SYS_CTRL_RST_ARM1);
+
+ regmap_write(ctx->sys_ctrl, OX820_RST_SET_REGOFFSET, value);
+
+ pr_emerg("Unable to restart system\n");
+ return NOTIFY_DONE;
+}
+
+static int ox820_restart_probe(struct platform_device *pdev)
+{
+ struct oxnas_restart_context *ctx;
+ struct regmap *sys_ctrl;
+ struct device *dev = &pdev->dev;
+ int err = 0;
+
+ sys_ctrl = syscon_node_to_regmap(pdev->dev.of_node);
+ if (IS_ERR(sys_ctrl))
+ return PTR_ERR(sys_ctrl);
+
+ ctx = devm_kzalloc(&pdev->dev, sizeof(*ctx), GFP_KERNEL);
+ if (!ctx)
+ return -ENOMEM;
+
+ ctx->sys_ctrl = sys_ctrl;
+ ctx->restart_handler.notifier_call = ox820_restart_handle;
+ ctx->restart_handler.priority = 192;
+ err = register_restart_handler(&ctx->restart_handler);
+ if (err)
+ dev_err(dev, "can't register restart notifier (err=%d)\n", err);
+
+ return err;
+}
+
+static const struct of_device_id ox820_restart_of_match[] = {
+ { .compatible = "oxsemi,ox820-sys-ctrl" },
+ {}
+};
+
+static struct platform_driver ox820_restart_driver = {
+ .probe = ox820_restart_probe,
+ .driver = {
+ .name = "ox820-chip-reset",
+ .of_match_table = ox820_restart_of_match,
+ },
+};
+builtin_platform_driver(ox820_restart_driver);
diff --git a/drivers/power/reset/piix4-poweroff.c b/drivers/power/reset/piix4-poweroff.c
new file mode 100644
index 000000000..7f308292d
--- /dev/null
+++ b/drivers/power/reset/piix4-poweroff.c
@@ -0,0 +1,109 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2016 Imagination Technologies
+ * Author: Paul Burton <paul.burton@mips.com>
+ */
+
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/pm.h>
+
+static struct pci_dev *pm_dev;
+static resource_size_t io_offset;
+
+enum piix4_pm_io_reg {
+ PIIX4_FUNC3IO_PMSTS = 0x00,
+#define PIIX4_FUNC3IO_PMSTS_PWRBTN_STS BIT(8)
+ PIIX4_FUNC3IO_PMCNTRL = 0x04,
+#define PIIX4_FUNC3IO_PMCNTRL_SUS_EN BIT(13)
+#define PIIX4_FUNC3IO_PMCNTRL_SUS_TYP_SOFF (0x0 << 10)
+};
+
+#define PIIX4_SUSPEND_MAGIC 0x00120002
+
+static const int piix4_pm_io_region = PCI_BRIDGE_RESOURCES;
+
+static void piix4_poweroff(void)
+{
+ int spec_devid;
+ u16 sts;
+
+ /* Ensure the power button status is clear */
+ while (1) {
+ sts = inw(io_offset + PIIX4_FUNC3IO_PMSTS);
+ if (!(sts & PIIX4_FUNC3IO_PMSTS_PWRBTN_STS))
+ break;
+ outw(sts, io_offset + PIIX4_FUNC3IO_PMSTS);
+ }
+
+ /* Enable entry to suspend */
+ outw(PIIX4_FUNC3IO_PMCNTRL_SUS_TYP_SOFF | PIIX4_FUNC3IO_PMCNTRL_SUS_EN,
+ io_offset + PIIX4_FUNC3IO_PMCNTRL);
+
+ /* If the special cycle occurs too soon this doesn't work... */
+ mdelay(10);
+
+ /*
+ * The PIIX4 will enter the suspend state only after seeing a special
+ * cycle with the correct magic data on the PCI bus. Generate that
+ * cycle now.
+ */
+ spec_devid = PCI_DEVID(0, PCI_DEVFN(0x1f, 0x7));
+ pci_bus_write_config_dword(pm_dev->bus, spec_devid, 0,
+ PIIX4_SUSPEND_MAGIC);
+
+ /* Give the system some time to power down, then error */
+ mdelay(1000);
+ pr_emerg("Unable to poweroff system\n");
+}
+
+static int piix4_poweroff_probe(struct pci_dev *dev,
+ const struct pci_device_id *id)
+{
+ int res;
+
+ if (pm_dev)
+ return -EINVAL;
+
+ /* Request access to the PIIX4 PM IO registers */
+ res = pci_request_region(dev, piix4_pm_io_region,
+ "PIIX4 PM IO registers");
+ if (res) {
+ dev_err(&dev->dev, "failed to request PM IO registers: %d\n",
+ res);
+ return res;
+ }
+
+ pm_dev = dev;
+ io_offset = pci_resource_start(dev, piix4_pm_io_region);
+ pm_power_off = piix4_poweroff;
+
+ return 0;
+}
+
+static void piix4_poweroff_remove(struct pci_dev *dev)
+{
+ if (pm_power_off == piix4_poweroff)
+ pm_power_off = NULL;
+
+ pci_release_region(dev, piix4_pm_io_region);
+ pm_dev = NULL;
+}
+
+static const struct pci_device_id piix4_poweroff_ids[] = {
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371AB_3) },
+ { 0 },
+};
+
+static struct pci_driver piix4_poweroff_driver = {
+ .name = "piix4-poweroff",
+ .id_table = piix4_poweroff_ids,
+ .probe = piix4_poweroff_probe,
+ .remove = piix4_poweroff_remove,
+};
+
+module_pci_driver(piix4_poweroff_driver);
+MODULE_AUTHOR("Paul Burton <paul.burton@mips.com>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/power/reset/qcom-pon.c b/drivers/power/reset/qcom-pon.c
new file mode 100644
index 000000000..4a688741a
--- /dev/null
+++ b/drivers/power/reset/qcom-pon.c
@@ -0,0 +1,99 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2017-18 Linaro Limited
+
+#include <linux/delay.h>
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/reboot.h>
+#include <linux/reboot-mode.h>
+#include <linux/regmap.h>
+
+#define PON_SOFT_RB_SPARE 0x8f
+
+#define GEN1_REASON_SHIFT 2
+#define GEN2_REASON_SHIFT 1
+
+struct pm8916_pon {
+ struct device *dev;
+ struct regmap *regmap;
+ u32 baseaddr;
+ struct reboot_mode_driver reboot_mode;
+ long reason_shift;
+};
+
+static int pm8916_reboot_mode_write(struct reboot_mode_driver *reboot,
+ unsigned int magic)
+{
+ struct pm8916_pon *pon = container_of
+ (reboot, struct pm8916_pon, reboot_mode);
+ int ret;
+
+ ret = regmap_update_bits(pon->regmap,
+ pon->baseaddr + PON_SOFT_RB_SPARE,
+ GENMASK(7, pon->reason_shift),
+ magic << pon->reason_shift);
+ if (ret < 0)
+ dev_err(pon->dev, "update reboot mode bits failed\n");
+
+ return ret;
+}
+
+static int pm8916_pon_probe(struct platform_device *pdev)
+{
+ struct pm8916_pon *pon;
+ int error;
+
+ pon = devm_kzalloc(&pdev->dev, sizeof(*pon), GFP_KERNEL);
+ if (!pon)
+ return -ENOMEM;
+
+ pon->dev = &pdev->dev;
+
+ pon->regmap = dev_get_regmap(pdev->dev.parent, NULL);
+ if (!pon->regmap) {
+ dev_err(&pdev->dev, "failed to locate regmap\n");
+ return -ENODEV;
+ }
+
+ error = of_property_read_u32(pdev->dev.of_node, "reg",
+ &pon->baseaddr);
+ if (error)
+ return error;
+
+ pon->reboot_mode.dev = &pdev->dev;
+ pon->reason_shift = (long)of_device_get_match_data(&pdev->dev);
+ pon->reboot_mode.write = pm8916_reboot_mode_write;
+ error = devm_reboot_mode_register(&pdev->dev, &pon->reboot_mode);
+ if (error) {
+ dev_err(&pdev->dev, "can't register reboot mode\n");
+ return error;
+ }
+
+ platform_set_drvdata(pdev, pon);
+
+ return devm_of_platform_populate(&pdev->dev);
+}
+
+static const struct of_device_id pm8916_pon_id_table[] = {
+ { .compatible = "qcom,pm8916-pon", .data = (void *)GEN1_REASON_SHIFT },
+ { .compatible = "qcom,pms405-pon", .data = (void *)GEN1_REASON_SHIFT },
+ { .compatible = "qcom,pm8998-pon", .data = (void *)GEN2_REASON_SHIFT },
+ { }
+};
+MODULE_DEVICE_TABLE(of, pm8916_pon_id_table);
+
+static struct platform_driver pm8916_pon_driver = {
+ .probe = pm8916_pon_probe,
+ .driver = {
+ .name = "pm8916-pon",
+ .of_match_table = of_match_ptr(pm8916_pon_id_table),
+ },
+};
+module_platform_driver(pm8916_pon_driver);
+
+MODULE_DESCRIPTION("pm8916 Power On driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/power/reset/qnap-poweroff.c b/drivers/power/reset/qnap-poweroff.c
new file mode 100644
index 000000000..52b7dc61d
--- /dev/null
+++ b/drivers/power/reset/qnap-poweroff.c
@@ -0,0 +1,136 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * QNAP Turbo NAS Board power off. Can also be used on Synology devices.
+ *
+ * Copyright (C) 2012 Andrew Lunn <andrew@lunn.ch>
+ *
+ * Based on the code from:
+ *
+ * Copyright (C) 2009 Martin Michlmayr <tbm@cyrius.com>
+ * Copyright (C) 2008 Byron Bradley <byron.bbradley@gmail.com>
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/serial_reg.h>
+#include <linux/kallsyms.h>
+#include <linux/of.h>
+#include <linux/io.h>
+#include <linux/clk.h>
+
+#define UART1_REG(x) (base + ((UART_##x) << 2))
+
+struct power_off_cfg {
+ u32 baud;
+ char cmd;
+};
+
+static const struct power_off_cfg qnap_power_off_cfg = {
+ .baud = 19200,
+ .cmd = 'A',
+};
+
+static const struct power_off_cfg synology_power_off_cfg = {
+ .baud = 9600,
+ .cmd = '1',
+};
+
+static const struct of_device_id qnap_power_off_of_match_table[] = {
+ { .compatible = "qnap,power-off",
+ .data = &qnap_power_off_cfg,
+ },
+ { .compatible = "synology,power-off",
+ .data = &synology_power_off_cfg,
+ },
+ {}
+};
+MODULE_DEVICE_TABLE(of, qnap_power_off_of_match_table);
+
+static void __iomem *base;
+static unsigned long tclk;
+static const struct power_off_cfg *cfg;
+
+static void qnap_power_off(void)
+{
+ const unsigned divisor = ((tclk + (8 * cfg->baud)) / (16 * cfg->baud));
+
+ pr_err("%s: triggering power-off...\n", __func__);
+
+ /* hijack UART1 and reset into sane state */
+ writel(0x83, UART1_REG(LCR));
+ writel(divisor & 0xff, UART1_REG(DLL));
+ writel((divisor >> 8) & 0xff, UART1_REG(DLM));
+ writel(0x03, UART1_REG(LCR));
+ writel(0x00, UART1_REG(IER));
+ writel(0x00, UART1_REG(FCR));
+ writel(0x00, UART1_REG(MCR));
+
+ /* send the power-off command to PIC */
+ writel(cfg->cmd, UART1_REG(TX));
+}
+
+static int qnap_power_off_probe(struct platform_device *pdev)
+{
+ struct device_node *np = pdev->dev.of_node;
+ struct resource *res;
+ struct clk *clk;
+ char symname[KSYM_NAME_LEN];
+
+ const struct of_device_id *match =
+ of_match_node(qnap_power_off_of_match_table, np);
+ cfg = match->data;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res) {
+ dev_err(&pdev->dev, "Missing resource");
+ return -EINVAL;
+ }
+
+ base = devm_ioremap(&pdev->dev, res->start, resource_size(res));
+ if (!base) {
+ dev_err(&pdev->dev, "Unable to map resource");
+ return -EINVAL;
+ }
+
+ /* We need to know tclk in order to calculate the UART divisor */
+ clk = devm_clk_get(&pdev->dev, NULL);
+ if (IS_ERR(clk)) {
+ dev_err(&pdev->dev, "Clk missing");
+ return PTR_ERR(clk);
+ }
+
+ tclk = clk_get_rate(clk);
+
+ /* Check that nothing else has already setup a handler */
+ if (pm_power_off) {
+ lookup_symbol_name((ulong)pm_power_off, symname);
+ dev_err(&pdev->dev,
+ "pm_power_off already claimed %p %s",
+ pm_power_off, symname);
+ return -EBUSY;
+ }
+ pm_power_off = qnap_power_off;
+
+ return 0;
+}
+
+static int qnap_power_off_remove(struct platform_device *pdev)
+{
+ pm_power_off = NULL;
+ return 0;
+}
+
+static struct platform_driver qnap_power_off_driver = {
+ .probe = qnap_power_off_probe,
+ .remove = qnap_power_off_remove,
+ .driver = {
+ .name = "qnap_power_off",
+ .of_match_table = of_match_ptr(qnap_power_off_of_match_table),
+ },
+};
+module_platform_driver(qnap_power_off_driver);
+
+MODULE_AUTHOR("Andrew Lunn <andrew@lunn.ch>");
+MODULE_DESCRIPTION("QNAP Power off driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/power/reset/reboot-mode.c b/drivers/power/reset/reboot-mode.c
new file mode 100644
index 000000000..b4076b10b
--- /dev/null
+++ b/drivers/power/reset/reboot-mode.c
@@ -0,0 +1,195 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (c) 2016, Fuzhou Rockchip Electronics Co., Ltd
+ */
+
+#include <linux/device.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/reboot.h>
+#include <linux/reboot-mode.h>
+
+#define PREFIX "mode-"
+
+struct mode_info {
+ const char *mode;
+ u32 magic;
+ struct list_head list;
+};
+
+static unsigned int get_reboot_mode_magic(struct reboot_mode_driver *reboot,
+ const char *cmd)
+{
+ const char *normal = "normal";
+ int magic = 0;
+ struct mode_info *info;
+
+ if (!cmd)
+ cmd = normal;
+
+ list_for_each_entry(info, &reboot->head, list) {
+ if (!strcmp(info->mode, cmd)) {
+ magic = info->magic;
+ break;
+ }
+ }
+
+ return magic;
+}
+
+static int reboot_mode_notify(struct notifier_block *this,
+ unsigned long mode, void *cmd)
+{
+ struct reboot_mode_driver *reboot;
+ unsigned int magic;
+
+ reboot = container_of(this, struct reboot_mode_driver, reboot_notifier);
+ magic = get_reboot_mode_magic(reboot, cmd);
+ if (magic)
+ reboot->write(reboot, magic);
+
+ return NOTIFY_DONE;
+}
+
+/**
+ * reboot_mode_register - register a reboot mode driver
+ * @reboot: reboot mode driver
+ *
+ * Returns: 0 on success or a negative error code on failure.
+ */
+int reboot_mode_register(struct reboot_mode_driver *reboot)
+{
+ struct mode_info *info;
+ struct property *prop;
+ struct device_node *np = reboot->dev->of_node;
+ size_t len = strlen(PREFIX);
+ int ret;
+
+ INIT_LIST_HEAD(&reboot->head);
+
+ for_each_property_of_node(np, prop) {
+ if (strncmp(prop->name, PREFIX, len))
+ continue;
+
+ info = devm_kzalloc(reboot->dev, sizeof(*info), GFP_KERNEL);
+ if (!info) {
+ ret = -ENOMEM;
+ goto error;
+ }
+
+ if (of_property_read_u32(np, prop->name, &info->magic)) {
+ dev_err(reboot->dev, "reboot mode %s without magic number\n",
+ info->mode);
+ devm_kfree(reboot->dev, info);
+ continue;
+ }
+
+ info->mode = kstrdup_const(prop->name + len, GFP_KERNEL);
+ if (!info->mode) {
+ ret = -ENOMEM;
+ goto error;
+ } else if (info->mode[0] == '\0') {
+ kfree_const(info->mode);
+ ret = -EINVAL;
+ dev_err(reboot->dev, "invalid mode name(%s): too short!\n",
+ prop->name);
+ goto error;
+ }
+
+ list_add_tail(&info->list, &reboot->head);
+ }
+
+ reboot->reboot_notifier.notifier_call = reboot_mode_notify;
+ register_reboot_notifier(&reboot->reboot_notifier);
+
+ return 0;
+
+error:
+ list_for_each_entry(info, &reboot->head, list)
+ kfree_const(info->mode);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(reboot_mode_register);
+
+/**
+ * reboot_mode_unregister - unregister a reboot mode driver
+ * @reboot: reboot mode driver
+ */
+int reboot_mode_unregister(struct reboot_mode_driver *reboot)
+{
+ struct mode_info *info;
+
+ unregister_reboot_notifier(&reboot->reboot_notifier);
+
+ list_for_each_entry(info, &reboot->head, list)
+ kfree_const(info->mode);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(reboot_mode_unregister);
+
+static void devm_reboot_mode_release(struct device *dev, void *res)
+{
+ reboot_mode_unregister(*(struct reboot_mode_driver **)res);
+}
+
+/**
+ * devm_reboot_mode_register() - resource managed reboot_mode_register()
+ * @dev: device to associate this resource with
+ * @reboot: reboot mode driver
+ *
+ * Returns: 0 on success or a negative error code on failure.
+ */
+int devm_reboot_mode_register(struct device *dev,
+ struct reboot_mode_driver *reboot)
+{
+ struct reboot_mode_driver **dr;
+ int rc;
+
+ dr = devres_alloc(devm_reboot_mode_release, sizeof(*dr), GFP_KERNEL);
+ if (!dr)
+ return -ENOMEM;
+
+ rc = reboot_mode_register(reboot);
+ if (rc) {
+ devres_free(dr);
+ return rc;
+ }
+
+ *dr = reboot;
+ devres_add(dev, dr);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(devm_reboot_mode_register);
+
+static int devm_reboot_mode_match(struct device *dev, void *res, void *data)
+{
+ struct reboot_mode_driver **p = res;
+
+ if (WARN_ON(!p || !*p))
+ return 0;
+
+ return *p == data;
+}
+
+/**
+ * devm_reboot_mode_unregister() - resource managed reboot_mode_unregister()
+ * @dev: device to associate this resource with
+ * @reboot: reboot mode driver
+ */
+void devm_reboot_mode_unregister(struct device *dev,
+ struct reboot_mode_driver *reboot)
+{
+ WARN_ON(devres_release(dev,
+ devm_reboot_mode_release,
+ devm_reboot_mode_match, reboot));
+}
+EXPORT_SYMBOL_GPL(devm_reboot_mode_unregister);
+
+MODULE_AUTHOR("Andy Yan <andy.yan@rock-chips.com>");
+MODULE_DESCRIPTION("System reboot mode core library");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/power/reset/restart-poweroff.c b/drivers/power/reset/restart-poweroff.c
new file mode 100644
index 000000000..d233daa58
--- /dev/null
+++ b/drivers/power/reset/restart-poweroff.c
@@ -0,0 +1,62 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Power off by restarting and let u-boot keep hold of the machine
+ * until the user presses a button for example.
+ *
+ * Andrew Lunn <andrew@lunn.ch>
+ *
+ * Copyright (C) 2012 Andrew Lunn
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/of_platform.h>
+#include <linux/module.h>
+#include <linux/reboot.h>
+
+static void restart_poweroff_do_poweroff(void)
+{
+ reboot_mode = REBOOT_HARD;
+ machine_restart(NULL);
+}
+
+static int restart_poweroff_probe(struct platform_device *pdev)
+{
+ /* If a pm_power_off function has already been added, leave it alone */
+ if (pm_power_off != NULL) {
+ dev_err(&pdev->dev,
+ "pm_power_off function already registered");
+ return -EBUSY;
+ }
+
+ pm_power_off = &restart_poweroff_do_poweroff;
+ return 0;
+}
+
+static int restart_poweroff_remove(struct platform_device *pdev)
+{
+ if (pm_power_off == &restart_poweroff_do_poweroff)
+ pm_power_off = NULL;
+
+ return 0;
+}
+
+static const struct of_device_id of_restart_poweroff_match[] = {
+ { .compatible = "restart-poweroff", },
+ {},
+};
+
+static struct platform_driver restart_poweroff_driver = {
+ .probe = restart_poweroff_probe,
+ .remove = restart_poweroff_remove,
+ .driver = {
+ .name = "poweroff-restart",
+ .of_match_table = of_restart_poweroff_match,
+ },
+};
+module_platform_driver(restart_poweroff_driver);
+
+MODULE_AUTHOR("Andrew Lunn <andrew@lunn.ch");
+MODULE_DESCRIPTION("restart poweroff driver");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:poweroff-restart");
diff --git a/drivers/power/reset/rmobile-reset.c b/drivers/power/reset/rmobile-reset.c
new file mode 100644
index 000000000..bd3b39655
--- /dev/null
+++ b/drivers/power/reset/rmobile-reset.c
@@ -0,0 +1,88 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Renesas R-Mobile Reset Driver
+ *
+ * Copyright (C) 2014 Glider bvba
+ */
+
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/notifier.h>
+#include <linux/of_address.h>
+#include <linux/platform_device.h>
+#include <linux/printk.h>
+#include <linux/reboot.h>
+
+/* SYSC Register Bank 2 */
+#define RESCNT2 0x20 /* Reset Control Register 2 */
+
+/* Reset Control Register 2 */
+#define RESCNT2_PRES 0x80000000 /* Soft power-on reset */
+
+static void __iomem *sysc_base2;
+
+static int rmobile_reset_handler(struct notifier_block *this,
+ unsigned long mode, void *cmd)
+{
+ pr_debug("%s %lu\n", __func__, mode);
+
+ /* Let's assume we have acquired the HPB semaphore */
+ writel(RESCNT2_PRES, sysc_base2 + RESCNT2);
+
+ return NOTIFY_DONE;
+}
+
+static struct notifier_block rmobile_reset_nb = {
+ .notifier_call = rmobile_reset_handler,
+ .priority = 192,
+};
+
+static int rmobile_reset_probe(struct platform_device *pdev)
+{
+ int error;
+
+ sysc_base2 = of_iomap(pdev->dev.of_node, 1);
+ if (!sysc_base2)
+ return -ENODEV;
+
+ error = register_restart_handler(&rmobile_reset_nb);
+ if (error) {
+ dev_err(&pdev->dev,
+ "cannot register restart handler (err=%d)\n", error);
+ goto fail_unmap;
+ }
+
+ return 0;
+
+fail_unmap:
+ iounmap(sysc_base2);
+ return error;
+}
+
+static int rmobile_reset_remove(struct platform_device *pdev)
+{
+ unregister_restart_handler(&rmobile_reset_nb);
+ iounmap(sysc_base2);
+ return 0;
+}
+
+static const struct of_device_id rmobile_reset_of_match[] = {
+ { .compatible = "renesas,sysc-rmobile", },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, rmobile_reset_of_match);
+
+static struct platform_driver rmobile_reset_driver = {
+ .probe = rmobile_reset_probe,
+ .remove = rmobile_reset_remove,
+ .driver = {
+ .name = "rmobile_reset",
+ .of_match_table = rmobile_reset_of_match,
+ },
+};
+
+module_platform_driver(rmobile_reset_driver);
+
+MODULE_DESCRIPTION("Renesas R-Mobile Reset Driver");
+MODULE_AUTHOR("Geert Uytterhoeven <geert+renesas@glider.be>");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/power/reset/sc27xx-poweroff.c b/drivers/power/reset/sc27xx-poweroff.c
new file mode 100644
index 000000000..90287c319
--- /dev/null
+++ b/drivers/power/reset/sc27xx-poweroff.c
@@ -0,0 +1,79 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2018 Spreadtrum Communications Inc.
+ * Copyright (C) 2018 Linaro Ltd.
+ */
+
+#include <linux/cpu.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/pm.h>
+#include <linux/regmap.h>
+#include <linux/syscore_ops.h>
+
+#define SC27XX_PWR_PD_HW 0xc2c
+#define SC27XX_PWR_OFF_EN BIT(0)
+#define SC27XX_SLP_CTRL 0xdf0
+#define SC27XX_LDO_XTL_EN BIT(3)
+
+static struct regmap *regmap;
+
+/*
+ * On Spreadtrum platform, we need power off system through external SC27xx
+ * series PMICs, and it is one similar SPI bus mapped by regmap to access PMIC,
+ * which is not fast io access.
+ *
+ * So before stopping other cores, we need release other cores' resource by
+ * taking cpus down to avoid racing regmap or spi mutex lock when poweroff
+ * system through PMIC.
+ */
+static void sc27xx_poweroff_shutdown(void)
+{
+#ifdef CONFIG_HOTPLUG_CPU
+ int cpu;
+
+ for_each_online_cpu(cpu) {
+ if (cpu != smp_processor_id())
+ remove_cpu(cpu);
+ }
+#endif
+}
+
+static struct syscore_ops poweroff_syscore_ops = {
+ .shutdown = sc27xx_poweroff_shutdown,
+};
+
+static void sc27xx_poweroff_do_poweroff(void)
+{
+ /* Disable the external subsys connection's power firstly */
+ regmap_write(regmap, SC27XX_SLP_CTRL, SC27XX_LDO_XTL_EN);
+
+ regmap_write(regmap, SC27XX_PWR_PD_HW, SC27XX_PWR_OFF_EN);
+}
+
+static int sc27xx_poweroff_probe(struct platform_device *pdev)
+{
+ if (regmap)
+ return -EINVAL;
+
+ regmap = dev_get_regmap(pdev->dev.parent, NULL);
+ if (!regmap)
+ return -ENODEV;
+
+ pm_power_off = sc27xx_poweroff_do_poweroff;
+ register_syscore_ops(&poweroff_syscore_ops);
+ return 0;
+}
+
+static struct platform_driver sc27xx_poweroff_driver = {
+ .probe = sc27xx_poweroff_probe,
+ .driver = {
+ .name = "sc27xx-poweroff",
+ },
+};
+module_platform_driver(sc27xx_poweroff_driver);
+
+MODULE_DESCRIPTION("Power off driver for SC27XX PMIC Device");
+MODULE_AUTHOR("Baolin Wang <baolin.wang@unisoc.com>");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/power/reset/st-poweroff.c b/drivers/power/reset/st-poweroff.c
new file mode 100644
index 000000000..5ccaacffa
--- /dev/null
+++ b/drivers/power/reset/st-poweroff.c
@@ -0,0 +1,112 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2014 STMicroelectronics
+ *
+ * Power off Restart driver, used in STMicroelectronics devices.
+ *
+ * Author: Christophe Kerello <christophe.kerello@st.com>
+ */
+
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/mfd/syscon.h>
+#include <linux/reboot.h>
+#include <linux/regmap.h>
+
+struct reset_syscfg {
+ struct regmap *regmap;
+ /* syscfg used for reset */
+ unsigned int offset_rst;
+ unsigned int mask_rst;
+ /* syscfg used for unmask the reset */
+ unsigned int offset_rst_msk;
+ unsigned int mask_rst_msk;
+};
+
+/* STiH407 */
+#define STIH407_SYSCFG_4000 0x0
+#define STIH407_SYSCFG_4008 0x20
+
+static struct reset_syscfg stih407_reset = {
+ .offset_rst = STIH407_SYSCFG_4000,
+ .mask_rst = BIT(0),
+ .offset_rst_msk = STIH407_SYSCFG_4008,
+ .mask_rst_msk = BIT(0)
+};
+
+
+static struct reset_syscfg *st_restart_syscfg;
+
+static int st_restart(struct notifier_block *this, unsigned long mode,
+ void *cmd)
+{
+ /* reset syscfg updated */
+ regmap_update_bits(st_restart_syscfg->regmap,
+ st_restart_syscfg->offset_rst,
+ st_restart_syscfg->mask_rst,
+ 0);
+
+ /* unmask the reset */
+ regmap_update_bits(st_restart_syscfg->regmap,
+ st_restart_syscfg->offset_rst_msk,
+ st_restart_syscfg->mask_rst_msk,
+ 0);
+
+ return NOTIFY_DONE;
+}
+
+static struct notifier_block st_restart_nb = {
+ .notifier_call = st_restart,
+ .priority = 192,
+};
+
+static const struct of_device_id st_reset_of_match[] = {
+ {
+ .compatible = "st,stih407-restart",
+ .data = (void *)&stih407_reset,
+ },
+ {}
+};
+
+static int st_reset_probe(struct platform_device *pdev)
+{
+ struct device_node *np = pdev->dev.of_node;
+ const struct of_device_id *match;
+ struct device *dev = &pdev->dev;
+
+ match = of_match_device(st_reset_of_match, dev);
+ if (!match)
+ return -ENODEV;
+
+ st_restart_syscfg = (struct reset_syscfg *)match->data;
+
+ st_restart_syscfg->regmap =
+ syscon_regmap_lookup_by_phandle(np, "st,syscfg");
+ if (IS_ERR(st_restart_syscfg->regmap)) {
+ dev_err(dev, "No syscfg phandle specified\n");
+ return PTR_ERR(st_restart_syscfg->regmap);
+ }
+
+ return register_restart_handler(&st_restart_nb);
+}
+
+static struct platform_driver st_reset_driver = {
+ .probe = st_reset_probe,
+ .driver = {
+ .name = "st_reset",
+ .of_match_table = st_reset_of_match,
+ },
+};
+
+static int __init st_reset_init(void)
+{
+ return platform_driver_register(&st_reset_driver);
+}
+
+device_initcall(st_reset_init);
+
+MODULE_AUTHOR("Christophe Kerello <christophe.kerello@st.com>");
+MODULE_DESCRIPTION("STMicroelectronics Power off Restart driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/power/reset/syscon-poweroff.c b/drivers/power/reset/syscon-poweroff.c
new file mode 100644
index 000000000..4d6923b10
--- /dev/null
+++ b/drivers/power/reset/syscon-poweroff.c
@@ -0,0 +1,106 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Generic Syscon Poweroff Driver
+ *
+ * Copyright (c) 2015, National Instruments Corp.
+ * Author: Moritz Fischer <moritz.fischer@ettus.com>
+ */
+
+#include <linux/kallsyms.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/notifier.h>
+#include <linux/mfd/syscon.h>
+#include <linux/of_address.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/pm.h>
+#include <linux/regmap.h>
+
+static struct regmap *map;
+static u32 offset;
+static u32 value;
+static u32 mask;
+
+static void syscon_poweroff(void)
+{
+ /* Issue the poweroff */
+ regmap_update_bits(map, offset, mask, value);
+
+ mdelay(1000);
+
+ pr_emerg("Unable to poweroff system\n");
+}
+
+static int syscon_poweroff_probe(struct platform_device *pdev)
+{
+ char symname[KSYM_NAME_LEN];
+ int mask_err, value_err;
+
+ map = syscon_regmap_lookup_by_phandle(pdev->dev.of_node, "regmap");
+ if (IS_ERR(map)) {
+ dev_err(&pdev->dev, "unable to get syscon");
+ return PTR_ERR(map);
+ }
+
+ if (of_property_read_u32(pdev->dev.of_node, "offset", &offset)) {
+ dev_err(&pdev->dev, "unable to read 'offset'");
+ return -EINVAL;
+ }
+
+ value_err = of_property_read_u32(pdev->dev.of_node, "value", &value);
+ mask_err = of_property_read_u32(pdev->dev.of_node, "mask", &mask);
+ if (value_err && mask_err) {
+ dev_err(&pdev->dev, "unable to read 'value' and 'mask'");
+ return -EINVAL;
+ }
+
+ if (value_err) {
+ /* support old binding */
+ value = mask;
+ mask = 0xFFFFFFFF;
+ } else if (mask_err) {
+ /* support value without mask*/
+ mask = 0xFFFFFFFF;
+ }
+
+ if (pm_power_off) {
+ lookup_symbol_name((ulong)pm_power_off, symname);
+ dev_err(&pdev->dev,
+ "pm_power_off already claimed %p %s",
+ pm_power_off, symname);
+ return -EBUSY;
+ }
+
+ pm_power_off = syscon_poweroff;
+
+ return 0;
+}
+
+static int syscon_poweroff_remove(struct platform_device *pdev)
+{
+ if (pm_power_off == syscon_poweroff)
+ pm_power_off = NULL;
+
+ return 0;
+}
+
+static const struct of_device_id syscon_poweroff_of_match[] = {
+ { .compatible = "syscon-poweroff" },
+ {}
+};
+
+static struct platform_driver syscon_poweroff_driver = {
+ .probe = syscon_poweroff_probe,
+ .remove = syscon_poweroff_remove,
+ .driver = {
+ .name = "syscon-poweroff",
+ .of_match_table = syscon_poweroff_of_match,
+ },
+};
+
+static int __init syscon_poweroff_register(void)
+{
+ return platform_driver_register(&syscon_poweroff_driver);
+}
+device_initcall(syscon_poweroff_register);
diff --git a/drivers/power/reset/syscon-reboot-mode.c b/drivers/power/reset/syscon-reboot-mode.c
new file mode 100644
index 000000000..e0772c9f7
--- /dev/null
+++ b/drivers/power/reset/syscon-reboot-mode.c
@@ -0,0 +1,86 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (c) 2016, Fuzhou Rockchip Electronics Co., Ltd
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/reboot.h>
+#include <linux/regmap.h>
+#include <linux/mfd/syscon.h>
+#include <linux/reboot-mode.h>
+
+struct syscon_reboot_mode {
+ struct regmap *map;
+ struct reboot_mode_driver reboot;
+ u32 offset;
+ u32 mask;
+};
+
+static int syscon_reboot_mode_write(struct reboot_mode_driver *reboot,
+ unsigned int magic)
+{
+ struct syscon_reboot_mode *syscon_rbm;
+ int ret;
+
+ syscon_rbm = container_of(reboot, struct syscon_reboot_mode, reboot);
+
+ ret = regmap_update_bits(syscon_rbm->map, syscon_rbm->offset,
+ syscon_rbm->mask, magic);
+ if (ret < 0)
+ dev_err(reboot->dev, "update reboot mode bits failed\n");
+
+ return ret;
+}
+
+static int syscon_reboot_mode_probe(struct platform_device *pdev)
+{
+ int ret;
+ struct syscon_reboot_mode *syscon_rbm;
+
+ syscon_rbm = devm_kzalloc(&pdev->dev, sizeof(*syscon_rbm), GFP_KERNEL);
+ if (!syscon_rbm)
+ return -ENOMEM;
+
+ syscon_rbm->reboot.dev = &pdev->dev;
+ syscon_rbm->reboot.write = syscon_reboot_mode_write;
+ syscon_rbm->mask = 0xffffffff;
+
+ syscon_rbm->map = syscon_node_to_regmap(pdev->dev.parent->of_node);
+ if (IS_ERR(syscon_rbm->map))
+ return PTR_ERR(syscon_rbm->map);
+
+ if (of_property_read_u32(pdev->dev.of_node, "offset",
+ &syscon_rbm->offset))
+ return -EINVAL;
+
+ of_property_read_u32(pdev->dev.of_node, "mask", &syscon_rbm->mask);
+
+ ret = devm_reboot_mode_register(&pdev->dev, &syscon_rbm->reboot);
+ if (ret)
+ dev_err(&pdev->dev, "can't register reboot mode\n");
+
+ return ret;
+}
+
+static const struct of_device_id syscon_reboot_mode_of_match[] = {
+ { .compatible = "syscon-reboot-mode" },
+ {}
+};
+MODULE_DEVICE_TABLE(of, syscon_reboot_mode_of_match);
+
+static struct platform_driver syscon_reboot_mode_driver = {
+ .probe = syscon_reboot_mode_probe,
+ .driver = {
+ .name = "syscon-reboot-mode",
+ .of_match_table = syscon_reboot_mode_of_match,
+ },
+};
+module_platform_driver(syscon_reboot_mode_driver);
+
+MODULE_AUTHOR("Andy Yan <andy.yan@rock-chips.com");
+MODULE_DESCRIPTION("SYSCON reboot mode driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/power/reset/syscon-reboot.c b/drivers/power/reset/syscon-reboot.c
new file mode 100644
index 000000000..510e36338
--- /dev/null
+++ b/drivers/power/reset/syscon-reboot.c
@@ -0,0 +1,100 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Generic Syscon Reboot Driver
+ *
+ * Copyright (c) 2013, Applied Micro Circuits Corporation
+ * Author: Feng Kan <fkan@apm.com>
+ */
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/notifier.h>
+#include <linux/mfd/syscon.h>
+#include <linux/of_address.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/reboot.h>
+#include <linux/regmap.h>
+
+struct syscon_reboot_context {
+ struct regmap *map;
+ u32 offset;
+ u32 value;
+ u32 mask;
+ struct notifier_block restart_handler;
+};
+
+static int syscon_restart_handle(struct notifier_block *this,
+ unsigned long mode, void *cmd)
+{
+ struct syscon_reboot_context *ctx =
+ container_of(this, struct syscon_reboot_context,
+ restart_handler);
+
+ /* Issue the reboot */
+ regmap_update_bits(ctx->map, ctx->offset, ctx->mask, ctx->value);
+
+ mdelay(1000);
+
+ pr_emerg("Unable to restart system\n");
+ return NOTIFY_DONE;
+}
+
+static int syscon_reboot_probe(struct platform_device *pdev)
+{
+ struct syscon_reboot_context *ctx;
+ struct device *dev = &pdev->dev;
+ int mask_err, value_err;
+ int err;
+
+ ctx = devm_kzalloc(&pdev->dev, sizeof(*ctx), GFP_KERNEL);
+ if (!ctx)
+ return -ENOMEM;
+
+ ctx->map = syscon_regmap_lookup_by_phandle(dev->of_node, "regmap");
+ if (IS_ERR(ctx->map)) {
+ ctx->map = syscon_node_to_regmap(dev->parent->of_node);
+ if (IS_ERR(ctx->map))
+ return PTR_ERR(ctx->map);
+ }
+
+ if (of_property_read_u32(pdev->dev.of_node, "offset", &ctx->offset))
+ return -EINVAL;
+
+ value_err = of_property_read_u32(pdev->dev.of_node, "value", &ctx->value);
+ mask_err = of_property_read_u32(pdev->dev.of_node, "mask", &ctx->mask);
+ if (value_err && mask_err) {
+ dev_err(dev, "unable to read 'value' and 'mask'");
+ return -EINVAL;
+ }
+
+ if (value_err) {
+ /* support old binding */
+ ctx->value = ctx->mask;
+ ctx->mask = 0xFFFFFFFF;
+ } else if (mask_err) {
+ /* support value without mask*/
+ ctx->mask = 0xFFFFFFFF;
+ }
+
+ ctx->restart_handler.notifier_call = syscon_restart_handle;
+ ctx->restart_handler.priority = 192;
+ err = register_restart_handler(&ctx->restart_handler);
+ if (err)
+ dev_err(dev, "can't register restart notifier (err=%d)\n", err);
+
+ return err;
+}
+
+static const struct of_device_id syscon_reboot_of_match[] = {
+ { .compatible = "syscon-reboot" },
+ {}
+};
+
+static struct platform_driver syscon_reboot_driver = {
+ .probe = syscon_reboot_probe,
+ .driver = {
+ .name = "syscon-reboot",
+ .of_match_table = syscon_reboot_of_match,
+ },
+};
+builtin_platform_driver(syscon_reboot_driver);
diff --git a/drivers/power/reset/vexpress-poweroff.c b/drivers/power/reset/vexpress-poweroff.c
new file mode 100644
index 000000000..1fdbcbd95
--- /dev/null
+++ b/drivers/power/reset/vexpress-poweroff.c
@@ -0,0 +1,149 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ *
+ * Copyright (C) 2012 ARM Limited
+ */
+
+#include <linux/delay.h>
+#include <linux/notifier.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/reboot.h>
+#include <linux/stat.h>
+#include <linux/vexpress.h>
+
+static void vexpress_reset_do(struct device *dev, const char *what)
+{
+ int err = -ENOENT;
+ struct regmap *reg = dev_get_drvdata(dev);
+
+ if (reg) {
+ err = regmap_write(reg, 0, 0);
+ if (!err)
+ mdelay(1000);
+ }
+
+ dev_emerg(dev, "Unable to %s (%d)\n", what, err);
+}
+
+static struct device *vexpress_power_off_device;
+static atomic_t vexpress_restart_nb_refcnt = ATOMIC_INIT(0);
+
+static void vexpress_power_off(void)
+{
+ vexpress_reset_do(vexpress_power_off_device, "power off");
+}
+
+static struct device *vexpress_restart_device;
+
+static int vexpress_restart(struct notifier_block *this, unsigned long mode,
+ void *cmd)
+{
+ vexpress_reset_do(vexpress_restart_device, "restart");
+
+ return NOTIFY_DONE;
+}
+
+static struct notifier_block vexpress_restart_nb = {
+ .notifier_call = vexpress_restart,
+ .priority = 128,
+};
+
+static ssize_t vexpress_reset_active_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ return sprintf(buf, "%d\n", vexpress_restart_device == dev);
+}
+
+static ssize_t vexpress_reset_active_store(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t count)
+{
+ long value;
+ int err = kstrtol(buf, 0, &value);
+
+ if (!err && value)
+ vexpress_restart_device = dev;
+
+ return err ? err : count;
+}
+
+static DEVICE_ATTR(active, S_IRUGO | S_IWUSR, vexpress_reset_active_show,
+ vexpress_reset_active_store);
+
+
+enum vexpress_reset_func { FUNC_RESET, FUNC_SHUTDOWN, FUNC_REBOOT };
+
+static const struct of_device_id vexpress_reset_of_match[] = {
+ {
+ .compatible = "arm,vexpress-reset",
+ .data = (void *)FUNC_RESET,
+ }, {
+ .compatible = "arm,vexpress-shutdown",
+ .data = (void *)FUNC_SHUTDOWN
+ }, {
+ .compatible = "arm,vexpress-reboot",
+ .data = (void *)FUNC_REBOOT
+ },
+ {}
+};
+
+static int _vexpress_register_restart_handler(struct device *dev)
+{
+ int err;
+
+ vexpress_restart_device = dev;
+ if (atomic_inc_return(&vexpress_restart_nb_refcnt) == 1) {
+ err = register_restart_handler(&vexpress_restart_nb);
+ if (err) {
+ dev_err(dev, "cannot register restart handler (err=%d)\n", err);
+ atomic_dec(&vexpress_restart_nb_refcnt);
+ return err;
+ }
+ }
+ device_create_file(dev, &dev_attr_active);
+
+ return 0;
+}
+
+static int vexpress_reset_probe(struct platform_device *pdev)
+{
+ const struct of_device_id *match =
+ of_match_device(vexpress_reset_of_match, &pdev->dev);
+ struct regmap *regmap;
+ int ret = 0;
+
+ if (!match)
+ return -EINVAL;
+
+ regmap = devm_regmap_init_vexpress_config(&pdev->dev);
+ if (IS_ERR(regmap))
+ return PTR_ERR(regmap);
+ dev_set_drvdata(&pdev->dev, regmap);
+
+ switch ((enum vexpress_reset_func)match->data) {
+ case FUNC_SHUTDOWN:
+ vexpress_power_off_device = &pdev->dev;
+ pm_power_off = vexpress_power_off;
+ break;
+ case FUNC_RESET:
+ if (!vexpress_restart_device)
+ ret = _vexpress_register_restart_handler(&pdev->dev);
+ break;
+ case FUNC_REBOOT:
+ ret = _vexpress_register_restart_handler(&pdev->dev);
+ break;
+ };
+
+ return ret;
+}
+
+static struct platform_driver vexpress_reset_driver = {
+ .probe = vexpress_reset_probe,
+ .driver = {
+ .name = "vexpress-reset",
+ .of_match_table = vexpress_reset_of_match,
+ .suppress_bind_attrs = true,
+ },
+};
+builtin_platform_driver(vexpress_reset_driver);
diff --git a/drivers/power/reset/xgene-reboot.c b/drivers/power/reset/xgene-reboot.c
new file mode 100644
index 000000000..0b0d2fd2b
--- /dev/null
+++ b/drivers/power/reset/xgene-reboot.c
@@ -0,0 +1,95 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * AppliedMicro X-Gene SoC Reboot Driver
+ *
+ * Copyright (c) 2013, Applied Micro Circuits Corporation
+ * Author: Feng Kan <fkan@apm.com>
+ * Author: Loc Ho <lho@apm.com>
+ *
+ * This driver provides system reboot functionality for APM X-Gene SoC.
+ * For system shutdown, this is board specify. If a board designer
+ * implements GPIO shutdown, use the gpio-poweroff.c driver.
+ */
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/notifier.h>
+#include <linux/of_device.h>
+#include <linux/of_address.h>
+#include <linux/platform_device.h>
+#include <linux/reboot.h>
+#include <linux/stat.h>
+#include <linux/slab.h>
+
+struct xgene_reboot_context {
+ struct device *dev;
+ void *csr;
+ u32 mask;
+ struct notifier_block restart_handler;
+};
+
+static int xgene_restart_handler(struct notifier_block *this,
+ unsigned long mode, void *cmd)
+{
+ struct xgene_reboot_context *ctx =
+ container_of(this, struct xgene_reboot_context,
+ restart_handler);
+
+ /* Issue the reboot */
+ writel(ctx->mask, ctx->csr);
+
+ mdelay(1000);
+
+ dev_emerg(ctx->dev, "Unable to restart system\n");
+
+ return NOTIFY_DONE;
+}
+
+static int xgene_reboot_probe(struct platform_device *pdev)
+{
+ struct xgene_reboot_context *ctx;
+ struct device *dev = &pdev->dev;
+ int err;
+
+ ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL);
+ if (!ctx)
+ return -ENOMEM;
+
+ ctx->csr = of_iomap(dev->of_node, 0);
+ if (!ctx->csr) {
+ dev_err(dev, "can not map resource\n");
+ return -ENODEV;
+ }
+
+ if (of_property_read_u32(dev->of_node, "mask", &ctx->mask))
+ ctx->mask = 0xFFFFFFFF;
+
+ ctx->dev = dev;
+ ctx->restart_handler.notifier_call = xgene_restart_handler;
+ ctx->restart_handler.priority = 128;
+ err = register_restart_handler(&ctx->restart_handler);
+ if (err) {
+ iounmap(ctx->csr);
+ dev_err(dev, "cannot register restart handler (err=%d)\n", err);
+ }
+
+ return err;
+}
+
+static const struct of_device_id xgene_reboot_of_match[] = {
+ { .compatible = "apm,xgene-reboot" },
+ {}
+};
+
+static struct platform_driver xgene_reboot_driver = {
+ .probe = xgene_reboot_probe,
+ .driver = {
+ .name = "xgene-reboot",
+ .of_match_table = xgene_reboot_of_match,
+ },
+};
+
+static int __init xgene_reboot_init(void)
+{
+ return platform_driver_register(&xgene_reboot_driver);
+}
+device_initcall(xgene_reboot_init);
diff --git a/drivers/power/reset/zx-reboot.c b/drivers/power/reset/zx-reboot.c
new file mode 100644
index 000000000..457950833
--- /dev/null
+++ b/drivers/power/reset/zx-reboot.c
@@ -0,0 +1,86 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * ZTE zx296702 SoC reset code
+ *
+ * Copyright (c) 2015 Linaro Ltd.
+ *
+ * Author: Jun Nie <jun.nie@linaro.org>
+ */
+
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/notifier.h>
+#include <linux/of_address.h>
+#include <linux/platform_device.h>
+#include <linux/reboot.h>
+
+static void __iomem *base;
+static void __iomem *pcu_base;
+
+static int zx_restart_handler(struct notifier_block *this,
+ unsigned long mode, void *cmd)
+{
+ writel_relaxed(1, base + 0xb0);
+ writel_relaxed(1, pcu_base + 0x34);
+
+ mdelay(50);
+ pr_emerg("Unable to restart system\n");
+
+ return NOTIFY_DONE;
+}
+
+static struct notifier_block zx_restart_nb = {
+ .notifier_call = zx_restart_handler,
+ .priority = 128,
+};
+
+static int zx_reboot_probe(struct platform_device *pdev)
+{
+ struct device_node *np = pdev->dev.of_node;
+ int err;
+
+ base = of_iomap(np, 0);
+ if (!base) {
+ WARN(1, "failed to map base address");
+ return -ENODEV;
+ }
+
+ np = of_find_compatible_node(NULL, NULL, "zte,zx296702-pcu");
+ pcu_base = of_iomap(np, 0);
+ of_node_put(np);
+ if (!pcu_base) {
+ iounmap(base);
+ WARN(1, "failed to map pcu_base address");
+ return -ENODEV;
+ }
+
+ err = register_restart_handler(&zx_restart_nb);
+ if (err) {
+ iounmap(base);
+ iounmap(pcu_base);
+ dev_err(&pdev->dev, "Register restart handler failed(err=%d)\n",
+ err);
+ }
+
+ return err;
+}
+
+static const struct of_device_id zx_reboot_of_match[] = {
+ { .compatible = "zte,sysctrl" },
+ {}
+};
+MODULE_DEVICE_TABLE(of, zx_reboot_of_match);
+
+static struct platform_driver zx_reboot_driver = {
+ .probe = zx_reboot_probe,
+ .driver = {
+ .name = "zx-reboot",
+ .of_match_table = zx_reboot_of_match,
+ },
+};
+module_platform_driver(zx_reboot_driver);
+
+MODULE_DESCRIPTION("ZTE SoCs reset driver");
+MODULE_AUTHOR("Jun Nie <jun.nie@linaro.org>");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/power/supply/88pm860x_battery.c b/drivers/power/supply/88pm860x_battery.c
new file mode 100644
index 000000000..590da88a1
--- /dev/null
+++ b/drivers/power/supply/88pm860x_battery.c
@@ -0,0 +1,1016 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Battery driver for Marvell 88PM860x PMIC
+ *
+ * Copyright (c) 2012 Marvell International Ltd.
+ * Author: Jett Zhou <jtzhou@marvell.com>
+ * Haojian Zhuang <haojian.zhuang@marvell.com>
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/mutex.h>
+#include <linux/string.h>
+#include <linux/power_supply.h>
+#include <linux/mfd/88pm860x.h>
+#include <linux/delay.h>
+
+/* bit definitions of Status Query Interface 2 */
+#define STATUS2_CHG (1 << 2)
+#define STATUS2_BAT (1 << 3)
+#define STATUS2_VBUS (1 << 4)
+
+/* bit definitions of Measurement Enable 1 Register */
+#define MEAS1_TINT (1 << 3)
+#define MEAS1_GP1 (1 << 5)
+
+/* bit definitions of Measurement Enable 3 Register */
+#define MEAS3_IBAT (1 << 0)
+#define MEAS3_BAT_DET (1 << 1)
+#define MEAS3_CC (1 << 2)
+
+/* bit definitions of Measurement Off Time Register */
+#define MEAS_OFF_SLEEP_EN (1 << 1)
+
+/* bit definitions of GPADC Bias Current 2 Register */
+#define GPBIAS2_GPADC1_SET (2 << 4)
+/* GPADC1 Bias Current value in uA unit */
+#define GPBIAS2_GPADC1_UA ((GPBIAS2_GPADC1_SET >> 4) * 5 + 1)
+
+/* bit definitions of GPADC Misc 1 Register */
+#define GPMISC1_GPADC_EN (1 << 0)
+
+/* bit definitions of Charger Control 6 Register */
+#define CC6_BAT_DET_GPADC1 1
+
+/* bit definitions of Coulomb Counter Reading Register */
+#define CCNT_AVG_SEL (4 << 3)
+
+/* bit definitions of RTC miscellaneous Register1 */
+#define RTC_SOC_5LSB (0x1F << 3)
+
+/* bit definitions of RTC Register1 */
+#define RTC_SOC_3MSB (0x7)
+
+/* bit definitions of Power up Log register */
+#define BAT_WU_LOG (1<<6)
+
+/* coulomb counter index */
+#define CCNT_POS1 0
+#define CCNT_POS2 1
+#define CCNT_NEG1 2
+#define CCNT_NEG2 3
+#define CCNT_SPOS 4
+#define CCNT_SNEG 5
+
+/* OCV -- Open Circuit Voltage */
+#define OCV_MODE_ACTIVE 0
+#define OCV_MODE_SLEEP 1
+
+/* Vbat range of CC for measuring Rbat */
+#define LOW_BAT_THRESHOLD 3600
+#define VBATT_RESISTOR_MIN 3800
+#define VBATT_RESISTOR_MAX 4100
+
+/* TBAT for batt, TINT for chip itself */
+#define PM860X_TEMP_TINT (0)
+#define PM860X_TEMP_TBAT (1)
+
+/*
+ * Battery temperature based on NTC resistor, defined
+ * corresponding resistor value -- Ohm / C degeree.
+ */
+#define TBAT_NEG_25D 127773 /* -25 */
+#define TBAT_NEG_10D 54564 /* -10 */
+#define TBAT_0D 32330 /* 0 */
+#define TBAT_10D 19785 /* 10 */
+#define TBAT_20D 12468 /* 20 */
+#define TBAT_30D 8072 /* 30 */
+#define TBAT_40D 5356 /* 40 */
+
+struct pm860x_battery_info {
+ struct pm860x_chip *chip;
+ struct i2c_client *i2c;
+ struct device *dev;
+
+ struct power_supply *battery;
+ struct mutex lock;
+ int status;
+ int irq_cc;
+ int irq_batt;
+ int max_capacity;
+ int resistor; /* Battery Internal Resistor */
+ int last_capacity;
+ int start_soc;
+ unsigned present:1;
+ unsigned temp_type:1; /* TINT or TBAT */
+};
+
+struct ccnt {
+ unsigned long long int pos;
+ unsigned long long int neg;
+ unsigned int spos;
+ unsigned int sneg;
+
+ int total_chg; /* mAh(3.6C) */
+ int total_dischg; /* mAh(3.6C) */
+};
+
+/*
+ * State of Charge.
+ * The first number is mAh(=3.6C), and the second number is percent point.
+ */
+static int array_soc[][2] = {
+ {4170, 100}, {4154, 99}, {4136, 98}, {4122, 97}, {4107, 96},
+ {4102, 95}, {4088, 94}, {4081, 93}, {4070, 92}, {4060, 91},
+ {4053, 90}, {4044, 89}, {4035, 88}, {4028, 87}, {4019, 86},
+ {4013, 85}, {4006, 84}, {3995, 83}, {3987, 82}, {3982, 81},
+ {3976, 80}, {3968, 79}, {3962, 78}, {3954, 77}, {3946, 76},
+ {3941, 75}, {3934, 74}, {3929, 73}, {3922, 72}, {3916, 71},
+ {3910, 70}, {3904, 69}, {3898, 68}, {3892, 67}, {3887, 66},
+ {3880, 65}, {3874, 64}, {3868, 63}, {3862, 62}, {3854, 61},
+ {3849, 60}, {3843, 59}, {3840, 58}, {3833, 57}, {3829, 56},
+ {3824, 55}, {3818, 54}, {3815, 53}, {3810, 52}, {3808, 51},
+ {3804, 50}, {3801, 49}, {3798, 48}, {3796, 47}, {3792, 46},
+ {3789, 45}, {3785, 44}, {3784, 43}, {3782, 42}, {3780, 41},
+ {3777, 40}, {3776, 39}, {3774, 38}, {3772, 37}, {3771, 36},
+ {3769, 35}, {3768, 34}, {3764, 33}, {3763, 32}, {3760, 31},
+ {3760, 30}, {3754, 29}, {3750, 28}, {3749, 27}, {3744, 26},
+ {3740, 25}, {3734, 24}, {3732, 23}, {3728, 22}, {3726, 21},
+ {3720, 20}, {3716, 19}, {3709, 18}, {3703, 17}, {3698, 16},
+ {3692, 15}, {3683, 14}, {3675, 13}, {3670, 12}, {3665, 11},
+ {3661, 10}, {3649, 9}, {3637, 8}, {3622, 7}, {3609, 6},
+ {3580, 5}, {3558, 4}, {3540, 3}, {3510, 2}, {3429, 1},
+};
+
+static struct ccnt ccnt_data;
+
+/*
+ * register 1 bit[7:0] -- bit[11:4] of measured value of voltage
+ * register 0 bit[3:0] -- bit[3:0] of measured value of voltage
+ */
+static int measure_12bit_voltage(struct pm860x_battery_info *info,
+ int offset, int *data)
+{
+ unsigned char buf[2];
+ int ret;
+
+ ret = pm860x_bulk_read(info->i2c, offset, 2, buf);
+ if (ret < 0)
+ return ret;
+
+ *data = ((buf[0] & 0xff) << 4) | (buf[1] & 0x0f);
+ /* V_MEAS(mV) = data * 1.8 * 1000 / (2^12) */
+ *data = ((*data & 0xfff) * 9 * 25) >> 9;
+ return 0;
+}
+
+static int measure_vbatt(struct pm860x_battery_info *info, int state,
+ int *data)
+{
+ unsigned char buf[5];
+ int ret;
+
+ switch (state) {
+ case OCV_MODE_ACTIVE:
+ ret = measure_12bit_voltage(info, PM8607_VBAT_MEAS1, data);
+ if (ret)
+ return ret;
+ /* V_BATT_MEAS(mV) = value * 3 * 1.8 * 1000 / (2^12) */
+ *data *= 3;
+ break;
+ case OCV_MODE_SLEEP:
+ /*
+ * voltage value of VBATT in sleep mode is saved in different
+ * registers.
+ * bit[11:10] -- bit[7:6] of LDO9(0x18)
+ * bit[9:8] -- bit[7:6] of LDO8(0x17)
+ * bit[7:6] -- bit[7:6] of LDO7(0x16)
+ * bit[5:4] -- bit[7:6] of LDO6(0x15)
+ * bit[3:0] -- bit[7:4] of LDO5(0x14)
+ */
+ ret = pm860x_bulk_read(info->i2c, PM8607_LDO5, 5, buf);
+ if (ret < 0)
+ return ret;
+ ret = ((buf[4] >> 6) << 10) | ((buf[3] >> 6) << 8)
+ | ((buf[2] >> 6) << 6) | ((buf[1] >> 6) << 4)
+ | (buf[0] >> 4);
+ /* V_BATT_MEAS(mV) = data * 3 * 1.8 * 1000 / (2^12) */
+ *data = ((*data & 0xff) * 27 * 25) >> 9;
+ break;
+ default:
+ return -EINVAL;
+ }
+ return 0;
+}
+
+/*
+ * Return value is signed data.
+ * Negative value means discharging, and positive value means charging.
+ */
+static int measure_current(struct pm860x_battery_info *info, int *data)
+{
+ unsigned char buf[2];
+ short s;
+ int ret;
+
+ ret = pm860x_bulk_read(info->i2c, PM8607_IBAT_MEAS1, 2, buf);
+ if (ret < 0)
+ return ret;
+
+ s = ((buf[0] & 0xff) << 8) | (buf[1] & 0xff);
+ /* current(mA) = value * 0.125 */
+ *data = s >> 3;
+ return 0;
+}
+
+static int set_charger_current(struct pm860x_battery_info *info, int data,
+ int *old)
+{
+ int ret;
+
+ if (data < 50 || data > 1600 || !old)
+ return -EINVAL;
+
+ data = ((data - 50) / 50) & 0x1f;
+ *old = pm860x_reg_read(info->i2c, PM8607_CHG_CTRL2);
+ *old = (*old & 0x1f) * 50 + 50;
+ ret = pm860x_set_bits(info->i2c, PM8607_CHG_CTRL2, 0x1f, data);
+ if (ret < 0)
+ return ret;
+ return 0;
+}
+
+static int read_ccnt(struct pm860x_battery_info *info, int offset,
+ int *ccnt)
+{
+ unsigned char buf[2];
+ int ret;
+
+ ret = pm860x_set_bits(info->i2c, PM8607_CCNT, 7, offset & 7);
+ if (ret < 0)
+ goto out;
+ ret = pm860x_bulk_read(info->i2c, PM8607_CCNT_MEAS1, 2, buf);
+ if (ret < 0)
+ goto out;
+ *ccnt = ((buf[0] & 0xff) << 8) | (buf[1] & 0xff);
+ return 0;
+out:
+ return ret;
+}
+
+static int calc_ccnt(struct pm860x_battery_info *info, struct ccnt *ccnt)
+{
+ unsigned int sum;
+ int ret;
+ int data;
+
+ ret = read_ccnt(info, CCNT_POS1, &data);
+ if (ret)
+ goto out;
+ sum = data & 0xffff;
+ ret = read_ccnt(info, CCNT_POS2, &data);
+ if (ret)
+ goto out;
+ sum |= (data & 0xffff) << 16;
+ ccnt->pos += sum;
+
+ ret = read_ccnt(info, CCNT_NEG1, &data);
+ if (ret)
+ goto out;
+ sum = data & 0xffff;
+ ret = read_ccnt(info, CCNT_NEG2, &data);
+ if (ret)
+ goto out;
+ sum |= (data & 0xffff) << 16;
+ sum = ~sum + 1; /* since it's negative */
+ ccnt->neg += sum;
+
+ ret = read_ccnt(info, CCNT_SPOS, &data);
+ if (ret)
+ goto out;
+ ccnt->spos += data;
+ ret = read_ccnt(info, CCNT_SNEG, &data);
+ if (ret)
+ goto out;
+
+ /*
+ * charge(mAh) = count * 1.6984 * 1e(-8)
+ * = count * 16984 * 1.024 * 1.024 * 1.024 / (2 ^ 40)
+ * = count * 18236 / (2 ^ 40)
+ */
+ ccnt->total_chg = (int) ((ccnt->pos * 18236) >> 40);
+ ccnt->total_dischg = (int) ((ccnt->neg * 18236) >> 40);
+ return 0;
+out:
+ return ret;
+}
+
+static int clear_ccnt(struct pm860x_battery_info *info, struct ccnt *ccnt)
+{
+ int data;
+
+ memset(ccnt, 0, sizeof(*ccnt));
+ /* read to clear ccnt */
+ read_ccnt(info, CCNT_POS1, &data);
+ read_ccnt(info, CCNT_POS2, &data);
+ read_ccnt(info, CCNT_NEG1, &data);
+ read_ccnt(info, CCNT_NEG2, &data);
+ read_ccnt(info, CCNT_SPOS, &data);
+ read_ccnt(info, CCNT_SNEG, &data);
+ return 0;
+}
+
+/* Calculate Open Circuit Voltage */
+static int calc_ocv(struct pm860x_battery_info *info, int *ocv)
+{
+ int ret;
+ int i;
+ int data;
+ int vbatt_avg;
+ int vbatt_sum;
+ int ibatt_avg;
+ int ibatt_sum;
+
+ if (!ocv)
+ return -EINVAL;
+
+ for (i = 0, ibatt_sum = 0, vbatt_sum = 0; i < 10; i++) {
+ ret = measure_vbatt(info, OCV_MODE_ACTIVE, &data);
+ if (ret)
+ goto out;
+ vbatt_sum += data;
+ ret = measure_current(info, &data);
+ if (ret)
+ goto out;
+ ibatt_sum += data;
+ }
+ vbatt_avg = vbatt_sum / 10;
+ ibatt_avg = ibatt_sum / 10;
+
+ mutex_lock(&info->lock);
+ if (info->present)
+ *ocv = vbatt_avg - ibatt_avg * info->resistor / 1000;
+ else
+ *ocv = vbatt_avg;
+ mutex_unlock(&info->lock);
+ dev_dbg(info->dev, "VBAT average:%d, OCV:%d\n", vbatt_avg, *ocv);
+ return 0;
+out:
+ return ret;
+}
+
+/* Calculate State of Charge (percent points) */
+static int calc_soc(struct pm860x_battery_info *info, int state, int *soc)
+{
+ int i;
+ int ocv;
+ int count;
+ int ret = -EINVAL;
+
+ if (!soc)
+ return -EINVAL;
+
+ switch (state) {
+ case OCV_MODE_ACTIVE:
+ ret = calc_ocv(info, &ocv);
+ break;
+ case OCV_MODE_SLEEP:
+ ret = measure_vbatt(info, OCV_MODE_SLEEP, &ocv);
+ break;
+ }
+ if (ret)
+ return ret;
+
+ count = ARRAY_SIZE(array_soc);
+ if (ocv < array_soc[count - 1][0]) {
+ *soc = 0;
+ return 0;
+ }
+
+ for (i = 0; i < count; i++) {
+ if (ocv >= array_soc[i][0]) {
+ *soc = array_soc[i][1];
+ break;
+ }
+ }
+ return 0;
+}
+
+static irqreturn_t pm860x_coulomb_handler(int irq, void *data)
+{
+ struct pm860x_battery_info *info = data;
+
+ calc_ccnt(info, &ccnt_data);
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t pm860x_batt_handler(int irq, void *data)
+{
+ struct pm860x_battery_info *info = data;
+ int ret;
+
+ mutex_lock(&info->lock);
+ ret = pm860x_reg_read(info->i2c, PM8607_STATUS_2);
+ if (ret & STATUS2_BAT) {
+ info->present = 1;
+ info->temp_type = PM860X_TEMP_TBAT;
+ } else {
+ info->present = 0;
+ info->temp_type = PM860X_TEMP_TINT;
+ }
+ mutex_unlock(&info->lock);
+ /* clear ccnt since battery is attached or dettached */
+ clear_ccnt(info, &ccnt_data);
+ return IRQ_HANDLED;
+}
+
+static void pm860x_init_battery(struct pm860x_battery_info *info)
+{
+ unsigned char buf[2];
+ int ret;
+ int data;
+ int bat_remove;
+ int soc = 0;
+
+ /* measure enable on GPADC1 */
+ data = MEAS1_GP1;
+ if (info->temp_type == PM860X_TEMP_TINT)
+ data |= MEAS1_TINT;
+ ret = pm860x_set_bits(info->i2c, PM8607_MEAS_EN1, data, data);
+ if (ret)
+ goto out;
+
+ /* measure enable on IBAT, BAT_DET, CC. IBAT is depend on CC. */
+ data = MEAS3_IBAT | MEAS3_BAT_DET | MEAS3_CC;
+ ret = pm860x_set_bits(info->i2c, PM8607_MEAS_EN3, data, data);
+ if (ret)
+ goto out;
+
+ /* measure disable CC in sleep time */
+ ret = pm860x_reg_write(info->i2c, PM8607_MEAS_OFF_TIME1, 0x82);
+ if (ret)
+ goto out;
+ ret = pm860x_reg_write(info->i2c, PM8607_MEAS_OFF_TIME2, 0x6c);
+ if (ret)
+ goto out;
+
+ /* enable GPADC */
+ ret = pm860x_set_bits(info->i2c, PM8607_GPADC_MISC1,
+ GPMISC1_GPADC_EN, GPMISC1_GPADC_EN);
+ if (ret < 0)
+ goto out;
+
+ /* detect battery via GPADC1 */
+ ret = pm860x_set_bits(info->i2c, PM8607_CHG_CTRL6,
+ CC6_BAT_DET_GPADC1, CC6_BAT_DET_GPADC1);
+ if (ret < 0)
+ goto out;
+
+ ret = pm860x_set_bits(info->i2c, PM8607_CCNT, 7 << 3,
+ CCNT_AVG_SEL);
+ if (ret < 0)
+ goto out;
+
+ /* set GPADC1 bias */
+ ret = pm860x_set_bits(info->i2c, PM8607_GP_BIAS2, 0xF << 4,
+ GPBIAS2_GPADC1_SET);
+ if (ret < 0)
+ goto out;
+
+ /* check whether battery present) */
+ mutex_lock(&info->lock);
+ ret = pm860x_reg_read(info->i2c, PM8607_STATUS_2);
+ if (ret < 0) {
+ mutex_unlock(&info->lock);
+ goto out;
+ }
+ if (ret & STATUS2_BAT) {
+ info->present = 1;
+ info->temp_type = PM860X_TEMP_TBAT;
+ } else {
+ info->present = 0;
+ info->temp_type = PM860X_TEMP_TINT;
+ }
+ mutex_unlock(&info->lock);
+
+ ret = calc_soc(info, OCV_MODE_ACTIVE, &soc);
+ if (ret < 0)
+ goto out;
+
+ data = pm860x_reg_read(info->i2c, PM8607_POWER_UP_LOG);
+ bat_remove = data & BAT_WU_LOG;
+
+ dev_dbg(info->dev, "battery wake up? %s\n",
+ bat_remove != 0 ? "yes" : "no");
+
+ /* restore SOC from RTC domain register */
+ if (bat_remove == 0) {
+ buf[0] = pm860x_reg_read(info->i2c, PM8607_RTC_MISC2);
+ buf[1] = pm860x_reg_read(info->i2c, PM8607_RTC1);
+ data = ((buf[1] & 0x3) << 5) | ((buf[0] >> 3) & 0x1F);
+ if (data > soc + 15)
+ info->start_soc = soc;
+ else if (data < soc - 15)
+ info->start_soc = soc;
+ else
+ info->start_soc = data;
+ dev_dbg(info->dev, "soc_rtc %d, soc_ocv :%d\n", data, soc);
+ } else {
+ pm860x_set_bits(info->i2c, PM8607_POWER_UP_LOG,
+ BAT_WU_LOG, BAT_WU_LOG);
+ info->start_soc = soc;
+ }
+ info->last_capacity = info->start_soc;
+ dev_dbg(info->dev, "init soc : %d\n", info->last_capacity);
+out:
+ return;
+}
+
+static void set_temp_threshold(struct pm860x_battery_info *info,
+ int min, int max)
+{
+ int data;
+
+ /* (tmp << 8) / 1800 */
+ if (min <= 0)
+ data = 0;
+ else
+ data = (min << 8) / 1800;
+ pm860x_reg_write(info->i2c, PM8607_GPADC1_HIGHTH, data);
+ dev_dbg(info->dev, "TEMP_HIGHTH : min: %d, 0x%x\n", min, data);
+
+ if (max <= 0)
+ data = 0xff;
+ else
+ data = (max << 8) / 1800;
+ pm860x_reg_write(info->i2c, PM8607_GPADC1_LOWTH, data);
+ dev_dbg(info->dev, "TEMP_LOWTH:max : %d, 0x%x\n", max, data);
+}
+
+static int measure_temp(struct pm860x_battery_info *info, int *data)
+{
+ int ret;
+ int temp;
+ int min;
+ int max;
+
+ if (info->temp_type == PM860X_TEMP_TINT) {
+ ret = measure_12bit_voltage(info, PM8607_TINT_MEAS1, data);
+ if (ret)
+ return ret;
+ *data = (*data - 884) * 1000 / 3611;
+ } else {
+ ret = measure_12bit_voltage(info, PM8607_GPADC1_MEAS1, data);
+ if (ret)
+ return ret;
+ /* meausered Vtbat(mV) / Ibias_current(11uA)*/
+ *data = (*data * 1000) / GPBIAS2_GPADC1_UA;
+
+ if (*data > TBAT_NEG_25D) {
+ temp = -30; /* over cold , suppose -30 roughly */
+ max = TBAT_NEG_10D * GPBIAS2_GPADC1_UA / 1000;
+ set_temp_threshold(info, 0, max);
+ } else if (*data > TBAT_NEG_10D) {
+ temp = -15; /* -15 degree, code */
+ max = TBAT_NEG_10D * GPBIAS2_GPADC1_UA / 1000;
+ set_temp_threshold(info, 0, max);
+ } else if (*data > TBAT_0D) {
+ temp = -5; /* -5 degree */
+ min = TBAT_NEG_10D * GPBIAS2_GPADC1_UA / 1000;
+ max = TBAT_40D * GPBIAS2_GPADC1_UA / 1000;
+ set_temp_threshold(info, min, max);
+ } else if (*data > TBAT_10D) {
+ temp = 5; /* in range of (0, 10) */
+ min = TBAT_NEG_10D * GPBIAS2_GPADC1_UA / 1000;
+ max = TBAT_40D * GPBIAS2_GPADC1_UA / 1000;
+ set_temp_threshold(info, min, max);
+ } else if (*data > TBAT_20D) {
+ temp = 15; /* in range of (10, 20) */
+ min = TBAT_NEG_10D * GPBIAS2_GPADC1_UA / 1000;
+ max = TBAT_40D * GPBIAS2_GPADC1_UA / 1000;
+ set_temp_threshold(info, min, max);
+ } else if (*data > TBAT_30D) {
+ temp = 25; /* in range of (20, 30) */
+ min = TBAT_NEG_10D * GPBIAS2_GPADC1_UA / 1000;
+ max = TBAT_40D * GPBIAS2_GPADC1_UA / 1000;
+ set_temp_threshold(info, min, max);
+ } else if (*data > TBAT_40D) {
+ temp = 35; /* in range of (30, 40) */
+ min = TBAT_NEG_10D * GPBIAS2_GPADC1_UA / 1000;
+ max = TBAT_40D * GPBIAS2_GPADC1_UA / 1000;
+ set_temp_threshold(info, min, max);
+ } else {
+ min = TBAT_40D * GPBIAS2_GPADC1_UA / 1000;
+ set_temp_threshold(info, min, 0);
+ temp = 45; /* over heat ,suppose 45 roughly */
+ }
+
+ dev_dbg(info->dev, "temp_C:%d C,temp_mv:%d mv\n", temp, *data);
+ *data = temp;
+ }
+ return 0;
+}
+
+static int calc_resistor(struct pm860x_battery_info *info)
+{
+ int vbatt_sum1;
+ int vbatt_sum2;
+ int chg_current;
+ int ibatt_sum1;
+ int ibatt_sum2;
+ int data;
+ int ret;
+ int i;
+
+ ret = measure_current(info, &data);
+ /* make sure that charging is launched by data > 0 */
+ if (ret || data < 0)
+ goto out;
+
+ ret = measure_vbatt(info, OCV_MODE_ACTIVE, &data);
+ if (ret)
+ goto out;
+ /* calculate resistor only in CC charge mode */
+ if (data < VBATT_RESISTOR_MIN || data > VBATT_RESISTOR_MAX)
+ goto out;
+
+ /* current is saved */
+ if (set_charger_current(info, 500, &chg_current))
+ goto out;
+
+ /*
+ * set charge current as 500mA, wait about 500ms till charging
+ * process is launched and stable with the newer charging current.
+ */
+ msleep(500);
+
+ for (i = 0, vbatt_sum1 = 0, ibatt_sum1 = 0; i < 10; i++) {
+ ret = measure_vbatt(info, OCV_MODE_ACTIVE, &data);
+ if (ret)
+ goto out_meas;
+ vbatt_sum1 += data;
+ ret = measure_current(info, &data);
+ if (ret)
+ goto out_meas;
+
+ if (data < 0)
+ ibatt_sum1 = ibatt_sum1 - data; /* discharging */
+ else
+ ibatt_sum1 = ibatt_sum1 + data; /* charging */
+ }
+
+ if (set_charger_current(info, 100, &ret))
+ goto out_meas;
+ /*
+ * set charge current as 100mA, wait about 500ms till charging
+ * process is launched and stable with the newer charging current.
+ */
+ msleep(500);
+
+ for (i = 0, vbatt_sum2 = 0, ibatt_sum2 = 0; i < 10; i++) {
+ ret = measure_vbatt(info, OCV_MODE_ACTIVE, &data);
+ if (ret)
+ goto out_meas;
+ vbatt_sum2 += data;
+ ret = measure_current(info, &data);
+ if (ret)
+ goto out_meas;
+
+ if (data < 0)
+ ibatt_sum2 = ibatt_sum2 - data; /* discharging */
+ else
+ ibatt_sum2 = ibatt_sum2 + data; /* charging */
+ }
+
+ /* restore current setting */
+ if (set_charger_current(info, chg_current, &ret))
+ goto out_meas;
+
+ if ((vbatt_sum1 > vbatt_sum2) && (ibatt_sum1 > ibatt_sum2) &&
+ (ibatt_sum2 > 0)) {
+ /* calculate resistor in discharging case */
+ data = 1000 * (vbatt_sum1 - vbatt_sum2)
+ / (ibatt_sum1 - ibatt_sum2);
+ if ((data - info->resistor > 0) &&
+ (data - info->resistor < info->resistor))
+ info->resistor = data;
+ if ((info->resistor - data > 0) &&
+ (info->resistor - data < data))
+ info->resistor = data;
+ }
+ return 0;
+
+out_meas:
+ set_charger_current(info, chg_current, &ret);
+out:
+ return -EINVAL;
+}
+
+static int calc_capacity(struct pm860x_battery_info *info, int *cap)
+{
+ int ret;
+ int data;
+ int ibat;
+ int cap_ocv = 0;
+ int cap_cc = 0;
+
+ ret = calc_ccnt(info, &ccnt_data);
+ if (ret)
+ goto out;
+soc:
+ data = info->max_capacity * info->start_soc / 100;
+ if (ccnt_data.total_dischg - ccnt_data.total_chg <= data) {
+ cap_cc =
+ data + ccnt_data.total_chg - ccnt_data.total_dischg;
+ } else {
+ clear_ccnt(info, &ccnt_data);
+ calc_soc(info, OCV_MODE_ACTIVE, &info->start_soc);
+ dev_dbg(info->dev, "restart soc = %d !\n",
+ info->start_soc);
+ goto soc;
+ }
+
+ cap_cc = cap_cc * 100 / info->max_capacity;
+ if (cap_cc < 0)
+ cap_cc = 0;
+ else if (cap_cc > 100)
+ cap_cc = 100;
+
+ dev_dbg(info->dev, "%s, last cap : %d", __func__,
+ info->last_capacity);
+
+ ret = measure_current(info, &ibat);
+ if (ret)
+ goto out;
+ /* Calculate the capacity when discharging(ibat < 0) */
+ if (ibat < 0) {
+ ret = calc_soc(info, OCV_MODE_ACTIVE, &cap_ocv);
+ if (ret)
+ cap_ocv = info->last_capacity;
+ ret = measure_vbatt(info, OCV_MODE_ACTIVE, &data);
+ if (ret)
+ goto out;
+ if (data <= LOW_BAT_THRESHOLD) {
+ /* choose the lower capacity value to report
+ * between vbat and CC when vbat < 3.6v;
+ * than 3.6v;
+ */
+ *cap = min(cap_ocv, cap_cc);
+ } else {
+ /* when detect vbat > 3.6v, but cap_cc < 15,and
+ * cap_ocv is 10% larger than cap_cc, we can think
+ * CC have some accumulation error, switch to OCV
+ * to estimate capacity;
+ * */
+ if (cap_cc < 15 && cap_ocv - cap_cc > 10)
+ *cap = cap_ocv;
+ else
+ *cap = cap_cc;
+ }
+ /* when discharging, make sure current capacity
+ * is lower than last*/
+ if (*cap > info->last_capacity)
+ *cap = info->last_capacity;
+ } else {
+ *cap = cap_cc;
+ }
+ info->last_capacity = *cap;
+
+ dev_dbg(info->dev, "%s, cap_ocv:%d cap_cc:%d, cap:%d\n",
+ (ibat < 0) ? "discharging" : "charging",
+ cap_ocv, cap_cc, *cap);
+ /*
+ * store the current capacity to RTC domain register,
+ * after next power up , it will be restored.
+ */
+ pm860x_set_bits(info->i2c, PM8607_RTC_MISC2, RTC_SOC_5LSB,
+ (*cap & 0x1F) << 3);
+ pm860x_set_bits(info->i2c, PM8607_RTC1, RTC_SOC_3MSB,
+ ((*cap >> 5) & 0x3));
+ return 0;
+out:
+ return ret;
+}
+
+static void pm860x_external_power_changed(struct power_supply *psy)
+{
+ struct pm860x_battery_info *info = dev_get_drvdata(psy->dev.parent);
+
+ calc_resistor(info);
+}
+
+static int pm860x_batt_get_prop(struct power_supply *psy,
+ enum power_supply_property psp,
+ union power_supply_propval *val)
+{
+ struct pm860x_battery_info *info = dev_get_drvdata(psy->dev.parent);
+ int data;
+ int ret;
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_PRESENT:
+ val->intval = info->present;
+ break;
+ case POWER_SUPPLY_PROP_CAPACITY:
+ ret = calc_capacity(info, &data);
+ if (ret)
+ return ret;
+ if (data < 0)
+ data = 0;
+ else if (data > 100)
+ data = 100;
+ /* return 100 if battery is not attached */
+ if (!info->present)
+ data = 100;
+ val->intval = data;
+ break;
+ case POWER_SUPPLY_PROP_TECHNOLOGY:
+ val->intval = POWER_SUPPLY_TECHNOLOGY_LION;
+ break;
+ case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+ /* return real vbatt Voltage */
+ ret = measure_vbatt(info, OCV_MODE_ACTIVE, &data);
+ if (ret)
+ return ret;
+ val->intval = data * 1000;
+ break;
+ case POWER_SUPPLY_PROP_VOLTAGE_AVG:
+ /* return Open Circuit Voltage (not measured voltage) */
+ ret = calc_ocv(info, &data);
+ if (ret)
+ return ret;
+ val->intval = data * 1000;
+ break;
+ case POWER_SUPPLY_PROP_CURRENT_NOW:
+ ret = measure_current(info, &data);
+ if (ret)
+ return ret;
+ val->intval = data;
+ break;
+ case POWER_SUPPLY_PROP_TEMP:
+ if (info->present) {
+ ret = measure_temp(info, &data);
+ if (ret)
+ return ret;
+ data *= 10;
+ } else {
+ /* Fake Temp 25C Without Battery */
+ data = 250;
+ }
+ val->intval = data;
+ break;
+ default:
+ return -ENODEV;
+ }
+ return 0;
+}
+
+static int pm860x_batt_set_prop(struct power_supply *psy,
+ enum power_supply_property psp,
+ const union power_supply_propval *val)
+{
+ struct pm860x_battery_info *info = dev_get_drvdata(psy->dev.parent);
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_CHARGE_FULL:
+ clear_ccnt(info, &ccnt_data);
+ info->start_soc = 100;
+ dev_dbg(info->dev, "chg done, update soc = %d\n",
+ info->start_soc);
+ break;
+ default:
+ return -EPERM;
+ }
+
+ return 0;
+}
+
+
+static enum power_supply_property pm860x_batt_props[] = {
+ POWER_SUPPLY_PROP_PRESENT,
+ POWER_SUPPLY_PROP_CAPACITY,
+ POWER_SUPPLY_PROP_TECHNOLOGY,
+ POWER_SUPPLY_PROP_VOLTAGE_NOW,
+ POWER_SUPPLY_PROP_VOLTAGE_AVG,
+ POWER_SUPPLY_PROP_CURRENT_NOW,
+ POWER_SUPPLY_PROP_TEMP,
+};
+
+static const struct power_supply_desc pm860x_battery_desc = {
+ .name = "battery-monitor",
+ .type = POWER_SUPPLY_TYPE_BATTERY,
+ .properties = pm860x_batt_props,
+ .num_properties = ARRAY_SIZE(pm860x_batt_props),
+ .get_property = pm860x_batt_get_prop,
+ .set_property = pm860x_batt_set_prop,
+ .external_power_changed = pm860x_external_power_changed,
+};
+
+static int pm860x_battery_probe(struct platform_device *pdev)
+{
+ struct pm860x_chip *chip = dev_get_drvdata(pdev->dev.parent);
+ struct pm860x_battery_info *info;
+ struct pm860x_power_pdata *pdata;
+ int ret;
+
+ info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL);
+ if (!info)
+ return -ENOMEM;
+
+ info->irq_cc = platform_get_irq(pdev, 0);
+ if (info->irq_cc <= 0)
+ return -EINVAL;
+
+ info->irq_batt = platform_get_irq(pdev, 1);
+ if (info->irq_batt <= 0)
+ return -EINVAL;
+
+ info->chip = chip;
+ info->i2c =
+ (chip->id == CHIP_PM8607) ? chip->client : chip->companion;
+ info->dev = &pdev->dev;
+ info->status = POWER_SUPPLY_STATUS_UNKNOWN;
+ pdata = pdev->dev.platform_data;
+
+ mutex_init(&info->lock);
+ platform_set_drvdata(pdev, info);
+
+ pm860x_init_battery(info);
+
+ if (pdata && pdata->max_capacity)
+ info->max_capacity = pdata->max_capacity;
+ else
+ info->max_capacity = 1500; /* set default capacity */
+ if (pdata && pdata->resistor)
+ info->resistor = pdata->resistor;
+ else
+ info->resistor = 300; /* set default internal resistor */
+
+ info->battery = devm_power_supply_register(&pdev->dev,
+ &pm860x_battery_desc,
+ NULL);
+ if (IS_ERR(info->battery))
+ return PTR_ERR(info->battery);
+ info->battery->dev.parent = &pdev->dev;
+
+ ret = devm_request_threaded_irq(chip->dev, info->irq_cc, NULL,
+ pm860x_coulomb_handler, IRQF_ONESHOT,
+ "coulomb", info);
+ if (ret < 0) {
+ dev_err(chip->dev, "Failed to request IRQ: #%d: %d\n",
+ info->irq_cc, ret);
+ return ret;
+ }
+
+ ret = devm_request_threaded_irq(chip->dev, info->irq_batt, NULL,
+ pm860x_batt_handler,
+ IRQF_ONESHOT, "battery", info);
+ if (ret < 0) {
+ dev_err(chip->dev, "Failed to request IRQ: #%d: %d\n",
+ info->irq_batt, ret);
+ return ret;
+ }
+
+
+ return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int pm860x_battery_suspend(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct pm860x_chip *chip = dev_get_drvdata(pdev->dev.parent);
+
+ if (device_may_wakeup(dev))
+ chip->wakeup_flag |= 1 << PM8607_IRQ_CC;
+ return 0;
+}
+
+static int pm860x_battery_resume(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct pm860x_chip *chip = dev_get_drvdata(pdev->dev.parent);
+
+ if (device_may_wakeup(dev))
+ chip->wakeup_flag &= ~(1 << PM8607_IRQ_CC);
+ return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(pm860x_battery_pm_ops,
+ pm860x_battery_suspend, pm860x_battery_resume);
+
+static struct platform_driver pm860x_battery_driver = {
+ .driver = {
+ .name = "88pm860x-battery",
+ .pm = &pm860x_battery_pm_ops,
+ },
+ .probe = pm860x_battery_probe,
+};
+module_platform_driver(pm860x_battery_driver);
+
+MODULE_DESCRIPTION("Marvell 88PM860x Battery driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/power/supply/88pm860x_charger.c b/drivers/power/supply/88pm860x_charger.c
new file mode 100644
index 000000000..f21ce52fb
--- /dev/null
+++ b/drivers/power/supply/88pm860x_charger.c
@@ -0,0 +1,757 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Battery driver for Marvell 88PM860x PMIC
+ *
+ * Copyright (c) 2012 Marvell International Ltd.
+ * Author: Jett Zhou <jtzhou@marvell.com>
+ * Haojian Zhuang <haojian.zhuang@marvell.com>
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/power_supply.h>
+#include <linux/mfd/88pm860x.h>
+#include <linux/delay.h>
+#include <linux/uaccess.h>
+#include <asm/div64.h>
+
+/* bit definitions of Status Query Interface 2 */
+#define STATUS2_CHG (1 << 2)
+
+/* bit definitions of Reset Out Register */
+#define RESET_SW_PD (1 << 7)
+
+/* bit definitions of PreReg 1 */
+#define PREREG1_90MA (0x0)
+#define PREREG1_180MA (0x1)
+#define PREREG1_450MA (0x4)
+#define PREREG1_540MA (0x5)
+#define PREREG1_1350MA (0xE)
+#define PREREG1_VSYS_4_5V (3 << 4)
+
+/* bit definitions of Charger Control 1 Register */
+#define CC1_MODE_OFF (0)
+#define CC1_MODE_PRECHARGE (1)
+#define CC1_MODE_FASTCHARGE (2)
+#define CC1_MODE_PULSECHARGE (3)
+#define CC1_ITERM_20MA (0 << 2)
+#define CC1_ITERM_60MA (2 << 2)
+#define CC1_VFCHG_4_2V (9 << 4)
+
+/* bit definitions of Charger Control 2 Register */
+#define CC2_ICHG_100MA (0x1)
+#define CC2_ICHG_500MA (0x9)
+#define CC2_ICHG_1000MA (0x13)
+
+/* bit definitions of Charger Control 3 Register */
+#define CC3_180MIN_TIMEOUT (0x6 << 4)
+#define CC3_270MIN_TIMEOUT (0x7 << 4)
+#define CC3_360MIN_TIMEOUT (0xA << 4)
+#define CC3_DISABLE_TIMEOUT (0xF << 4)
+
+/* bit definitions of Charger Control 4 Register */
+#define CC4_IPRE_40MA (7)
+#define CC4_VPCHG_3_2V (3 << 4)
+#define CC4_IFCHG_MON_EN (1 << 6)
+#define CC4_BTEMP_MON_EN (1 << 7)
+
+/* bit definitions of Charger Control 6 Register */
+#define CC6_BAT_OV_EN (1 << 2)
+#define CC6_BAT_UV_EN (1 << 3)
+#define CC6_UV_VBAT_SET (0x3 << 6) /* 2.8v */
+
+/* bit definitions of Charger Control 7 Register */
+#define CC7_BAT_REM_EN (1 << 3)
+#define CC7_IFSM_EN (1 << 7)
+
+/* bit definitions of Measurement Enable 1 Register */
+#define MEAS1_VBAT (1 << 0)
+
+/* bit definitions of Measurement Enable 3 Register */
+#define MEAS3_IBAT_EN (1 << 0)
+#define MEAS3_CC_EN (1 << 2)
+
+#define FSM_INIT 0
+#define FSM_DISCHARGE 1
+#define FSM_PRECHARGE 2
+#define FSM_FASTCHARGE 3
+
+#define PRECHARGE_THRESHOLD 3100
+#define POWEROFF_THRESHOLD 3400
+#define CHARGE_THRESHOLD 4000
+#define DISCHARGE_THRESHOLD 4180
+
+/* over-temperature on PM8606 setting */
+#define OVER_TEMP_FLAG (1 << 6)
+#define OVTEMP_AUTORECOVER (1 << 3)
+
+/* over-voltage protect on vchg setting mv */
+#define VCHG_NORMAL_LOW 4200
+#define VCHG_NORMAL_CHECK 5800
+#define VCHG_NORMAL_HIGH 6000
+#define VCHG_OVP_LOW 5500
+
+struct pm860x_charger_info {
+ struct pm860x_chip *chip;
+ struct i2c_client *i2c;
+ struct i2c_client *i2c_8606;
+ struct device *dev;
+
+ struct power_supply *usb;
+ struct mutex lock;
+ int irq_nums;
+ int irq[7];
+ unsigned state:3; /* fsm state */
+ unsigned online:1; /* usb charger */
+ unsigned present:1; /* battery present */
+ unsigned allowed:1;
+};
+
+static char *pm860x_supplied_to[] = {
+ "battery-monitor",
+};
+
+static int measure_vchg(struct pm860x_charger_info *info, int *data)
+{
+ unsigned char buf[2];
+ int ret = 0;
+
+ ret = pm860x_bulk_read(info->i2c, PM8607_VCHG_MEAS1, 2, buf);
+ if (ret < 0)
+ return ret;
+
+ *data = ((buf[0] & 0xff) << 4) | (buf[1] & 0x0f);
+ /* V_BATT_MEAS(mV) = value * 5 * 1.8 * 1000 / (2^12) */
+ *data = ((*data & 0xfff) * 9 * 125) >> 9;
+
+ dev_dbg(info->dev, "%s, vchg: %d mv\n", __func__, *data);
+
+ return ret;
+}
+
+static void set_vchg_threshold(struct pm860x_charger_info *info,
+ int min, int max)
+{
+ int data;
+
+ /* (tmp << 8) * / 5 / 1800 */
+ if (min <= 0)
+ data = 0;
+ else
+ data = (min << 5) / 1125;
+ pm860x_reg_write(info->i2c, PM8607_VCHG_LOWTH, data);
+ dev_dbg(info->dev, "VCHG_LOWTH:%dmv, 0x%x\n", min, data);
+
+ if (max <= 0)
+ data = 0xff;
+ else
+ data = (max << 5) / 1125;
+ pm860x_reg_write(info->i2c, PM8607_VCHG_HIGHTH, data);
+ dev_dbg(info->dev, "VCHG_HIGHTH:%dmv, 0x%x\n", max, data);
+
+}
+
+static void set_vbatt_threshold(struct pm860x_charger_info *info,
+ int min, int max)
+{
+ int data;
+
+ /* (tmp << 8) * 3 / 1800 */
+ if (min <= 0)
+ data = 0;
+ else
+ data = (min << 5) / 675;
+ pm860x_reg_write(info->i2c, PM8607_VBAT_LOWTH, data);
+ dev_dbg(info->dev, "VBAT Min:%dmv, LOWTH:0x%x\n", min, data);
+
+ if (max <= 0)
+ data = 0xff;
+ else
+ data = (max << 5) / 675;
+ pm860x_reg_write(info->i2c, PM8607_VBAT_HIGHTH, data);
+ dev_dbg(info->dev, "VBAT Max:%dmv, HIGHTH:0x%x\n", max, data);
+
+ return;
+}
+
+static int start_precharge(struct pm860x_charger_info *info)
+{
+ int ret;
+
+ dev_dbg(info->dev, "Start Pre-charging!\n");
+ set_vbatt_threshold(info, 0, 0);
+
+ ret = pm860x_reg_write(info->i2c_8606, PM8606_PREREGULATORA,
+ PREREG1_1350MA | PREREG1_VSYS_4_5V);
+ if (ret < 0)
+ goto out;
+ /* stop charging */
+ ret = pm860x_set_bits(info->i2c, PM8607_CHG_CTRL1, 3,
+ CC1_MODE_OFF);
+ if (ret < 0)
+ goto out;
+ /* set 270 minutes timeout */
+ ret = pm860x_set_bits(info->i2c, PM8607_CHG_CTRL3, (0xf << 4),
+ CC3_270MIN_TIMEOUT);
+ if (ret < 0)
+ goto out;
+ /* set precharge current, termination voltage, IBAT & TBAT monitor */
+ ret = pm860x_reg_write(info->i2c, PM8607_CHG_CTRL4,
+ CC4_IPRE_40MA | CC4_VPCHG_3_2V |
+ CC4_IFCHG_MON_EN | CC4_BTEMP_MON_EN);
+ if (ret < 0)
+ goto out;
+ ret = pm860x_set_bits(info->i2c, PM8607_CHG_CTRL7,
+ CC7_BAT_REM_EN | CC7_IFSM_EN,
+ CC7_BAT_REM_EN | CC7_IFSM_EN);
+ if (ret < 0)
+ goto out;
+ /* trigger precharge */
+ ret = pm860x_set_bits(info->i2c, PM8607_CHG_CTRL1, 3,
+ CC1_MODE_PRECHARGE);
+out:
+ return ret;
+}
+
+static int start_fastcharge(struct pm860x_charger_info *info)
+{
+ int ret;
+
+ dev_dbg(info->dev, "Start Fast-charging!\n");
+
+ /* set fastcharge termination current & voltage, disable charging */
+ ret = pm860x_reg_write(info->i2c, PM8607_CHG_CTRL1,
+ CC1_MODE_OFF | CC1_ITERM_60MA |
+ CC1_VFCHG_4_2V);
+ if (ret < 0)
+ goto out;
+ ret = pm860x_reg_write(info->i2c_8606, PM8606_PREREGULATORA,
+ PREREG1_540MA | PREREG1_VSYS_4_5V);
+ if (ret < 0)
+ goto out;
+ ret = pm860x_set_bits(info->i2c, PM8607_CHG_CTRL2, 0x1f,
+ CC2_ICHG_500MA);
+ if (ret < 0)
+ goto out;
+ /* set 270 minutes timeout */
+ ret = pm860x_set_bits(info->i2c, PM8607_CHG_CTRL3, (0xf << 4),
+ CC3_270MIN_TIMEOUT);
+ if (ret < 0)
+ goto out;
+ /* set IBAT & TBAT monitor */
+ ret = pm860x_set_bits(info->i2c, PM8607_CHG_CTRL4,
+ CC4_IFCHG_MON_EN | CC4_BTEMP_MON_EN,
+ CC4_IFCHG_MON_EN | CC4_BTEMP_MON_EN);
+ if (ret < 0)
+ goto out;
+ ret = pm860x_set_bits(info->i2c, PM8607_CHG_CTRL6,
+ CC6_BAT_OV_EN | CC6_BAT_UV_EN |
+ CC6_UV_VBAT_SET,
+ CC6_BAT_OV_EN | CC6_BAT_UV_EN |
+ CC6_UV_VBAT_SET);
+ if (ret < 0)
+ goto out;
+ ret = pm860x_set_bits(info->i2c, PM8607_CHG_CTRL7,
+ CC7_BAT_REM_EN | CC7_IFSM_EN,
+ CC7_BAT_REM_EN | CC7_IFSM_EN);
+ if (ret < 0)
+ goto out;
+ /* launch fast-charge */
+ ret = pm860x_set_bits(info->i2c, PM8607_CHG_CTRL1, 3,
+ CC1_MODE_FASTCHARGE);
+ /* vchg threshold setting */
+ set_vchg_threshold(info, VCHG_NORMAL_LOW, VCHG_NORMAL_HIGH);
+out:
+ return ret;
+}
+
+static void stop_charge(struct pm860x_charger_info *info, int vbatt)
+{
+ dev_dbg(info->dev, "Stop charging!\n");
+ pm860x_set_bits(info->i2c, PM8607_CHG_CTRL1, 3, CC1_MODE_OFF);
+ if (vbatt > CHARGE_THRESHOLD && info->online)
+ set_vbatt_threshold(info, CHARGE_THRESHOLD, 0);
+}
+
+static void power_off_notification(struct pm860x_charger_info *info)
+{
+ dev_dbg(info->dev, "Power-off notification!\n");
+}
+
+static int set_charging_fsm(struct pm860x_charger_info *info)
+{
+ struct power_supply *psy;
+ union power_supply_propval data;
+ unsigned char fsm_state[][16] = { "init", "discharge", "precharge",
+ "fastcharge",
+ };
+ int ret;
+ int vbatt;
+
+ psy = power_supply_get_by_name(pm860x_supplied_to[0]);
+ if (!psy)
+ return -EINVAL;
+ ret = power_supply_get_property(psy, POWER_SUPPLY_PROP_VOLTAGE_NOW,
+ &data);
+ if (ret) {
+ power_supply_put(psy);
+ return ret;
+ }
+ vbatt = data.intval / 1000;
+
+ ret = power_supply_get_property(psy, POWER_SUPPLY_PROP_PRESENT, &data);
+ if (ret) {
+ power_supply_put(psy);
+ return ret;
+ }
+ power_supply_put(psy);
+
+ mutex_lock(&info->lock);
+ info->present = data.intval;
+
+ dev_dbg(info->dev, "Entering FSM:%s, Charger:%s, Battery:%s, "
+ "Allowed:%d\n",
+ &fsm_state[info->state][0],
+ (info->online) ? "online" : "N/A",
+ (info->present) ? "present" : "N/A", info->allowed);
+ dev_dbg(info->dev, "set_charging_fsm:vbatt:%d(mV)\n", vbatt);
+
+ switch (info->state) {
+ case FSM_INIT:
+ if (info->online && info->present && info->allowed) {
+ if (vbatt < PRECHARGE_THRESHOLD) {
+ info->state = FSM_PRECHARGE;
+ start_precharge(info);
+ } else if (vbatt > DISCHARGE_THRESHOLD) {
+ info->state = FSM_DISCHARGE;
+ stop_charge(info, vbatt);
+ } else if (vbatt < DISCHARGE_THRESHOLD) {
+ info->state = FSM_FASTCHARGE;
+ start_fastcharge(info);
+ }
+ } else {
+ if (vbatt < POWEROFF_THRESHOLD) {
+ power_off_notification(info);
+ } else {
+ info->state = FSM_DISCHARGE;
+ stop_charge(info, vbatt);
+ }
+ }
+ break;
+ case FSM_PRECHARGE:
+ if (info->online && info->present && info->allowed) {
+ if (vbatt > PRECHARGE_THRESHOLD) {
+ info->state = FSM_FASTCHARGE;
+ start_fastcharge(info);
+ }
+ } else {
+ info->state = FSM_DISCHARGE;
+ stop_charge(info, vbatt);
+ }
+ break;
+ case FSM_FASTCHARGE:
+ if (info->online && info->present && info->allowed) {
+ if (vbatt < PRECHARGE_THRESHOLD) {
+ info->state = FSM_PRECHARGE;
+ start_precharge(info);
+ }
+ } else {
+ info->state = FSM_DISCHARGE;
+ stop_charge(info, vbatt);
+ }
+ break;
+ case FSM_DISCHARGE:
+ if (info->online && info->present && info->allowed) {
+ if (vbatt < PRECHARGE_THRESHOLD) {
+ info->state = FSM_PRECHARGE;
+ start_precharge(info);
+ } else if (vbatt < DISCHARGE_THRESHOLD) {
+ info->state = FSM_FASTCHARGE;
+ start_fastcharge(info);
+ }
+ } else {
+ if (vbatt < POWEROFF_THRESHOLD)
+ power_off_notification(info);
+ else if (vbatt > CHARGE_THRESHOLD && info->online)
+ set_vbatt_threshold(info, CHARGE_THRESHOLD, 0);
+ }
+ break;
+ default:
+ dev_warn(info->dev, "FSM meets wrong state:%d\n",
+ info->state);
+ break;
+ }
+ dev_dbg(info->dev,
+ "Out FSM:%s, Charger:%s, Battery:%s, Allowed:%d\n",
+ &fsm_state[info->state][0],
+ (info->online) ? "online" : "N/A",
+ (info->present) ? "present" : "N/A", info->allowed);
+ mutex_unlock(&info->lock);
+
+ return 0;
+}
+
+static irqreturn_t pm860x_charger_handler(int irq, void *data)
+{
+ struct pm860x_charger_info *info = data;
+ int ret;
+
+ mutex_lock(&info->lock);
+ ret = pm860x_reg_read(info->i2c, PM8607_STATUS_2);
+ if (ret < 0) {
+ mutex_unlock(&info->lock);
+ goto out;
+ }
+ if (ret & STATUS2_CHG) {
+ info->online = 1;
+ info->allowed = 1;
+ } else {
+ info->online = 0;
+ info->allowed = 0;
+ }
+ mutex_unlock(&info->lock);
+ dev_dbg(info->dev, "%s, Charger:%s, Allowed:%d\n", __func__,
+ (info->online) ? "online" : "N/A", info->allowed);
+
+ set_charging_fsm(info);
+
+ power_supply_changed(info->usb);
+out:
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t pm860x_temp_handler(int irq, void *data)
+{
+ struct power_supply *psy;
+ struct pm860x_charger_info *info = data;
+ union power_supply_propval temp;
+ int value;
+ int ret;
+
+ psy = power_supply_get_by_name(pm860x_supplied_to[0]);
+ if (!psy)
+ return IRQ_HANDLED;
+ ret = power_supply_get_property(psy, POWER_SUPPLY_PROP_TEMP, &temp);
+ if (ret)
+ goto out;
+ value = temp.intval / 10;
+
+ mutex_lock(&info->lock);
+ /* Temperature < -10 C or >40 C, Will not allow charge */
+ if (value < -10 || value > 40)
+ info->allowed = 0;
+ else
+ info->allowed = 1;
+ dev_dbg(info->dev, "%s, Allowed: %d\n", __func__, info->allowed);
+ mutex_unlock(&info->lock);
+
+ set_charging_fsm(info);
+out:
+ power_supply_put(psy);
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t pm860x_exception_handler(int irq, void *data)
+{
+ struct pm860x_charger_info *info = data;
+
+ mutex_lock(&info->lock);
+ info->allowed = 0;
+ mutex_unlock(&info->lock);
+ dev_dbg(info->dev, "%s, irq: %d\n", __func__, irq);
+
+ set_charging_fsm(info);
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t pm860x_done_handler(int irq, void *data)
+{
+ struct pm860x_charger_info *info = data;
+ struct power_supply *psy;
+ union power_supply_propval val;
+ int ret;
+ int vbatt;
+
+ mutex_lock(&info->lock);
+ /* pre-charge done, will transimit to fast-charge stage */
+ if (info->state == FSM_PRECHARGE) {
+ info->allowed = 1;
+ goto out;
+ }
+ /*
+ * Fast charge done, delay to read
+ * the correct status of CHG_DET.
+ */
+ mdelay(5);
+ info->allowed = 0;
+ psy = power_supply_get_by_name(pm860x_supplied_to[0]);
+ if (!psy)
+ goto out;
+ ret = power_supply_get_property(psy, POWER_SUPPLY_PROP_VOLTAGE_NOW,
+ &val);
+ if (ret)
+ goto out_psy_put;
+ vbatt = val.intval / 1000;
+ /*
+ * CHG_DONE interrupt is faster than CHG_DET interrupt when
+ * plug in/out usb, So we can not rely on info->online, we
+ * need check pm8607 status register to check usb is online
+ * or not, then we can decide it is real charge done
+ * automatically or it is triggered by usb plug out;
+ */
+ ret = pm860x_reg_read(info->i2c, PM8607_STATUS_2);
+ if (ret < 0)
+ goto out_psy_put;
+ if (vbatt > CHARGE_THRESHOLD && ret & STATUS2_CHG)
+ power_supply_set_property(psy, POWER_SUPPLY_PROP_CHARGE_FULL,
+ &val);
+
+out_psy_put:
+ power_supply_put(psy);
+out:
+ mutex_unlock(&info->lock);
+ dev_dbg(info->dev, "%s, Allowed: %d\n", __func__, info->allowed);
+ set_charging_fsm(info);
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t pm860x_vbattery_handler(int irq, void *data)
+{
+ struct pm860x_charger_info *info = data;
+
+ mutex_lock(&info->lock);
+
+ set_vbatt_threshold(info, 0, 0);
+
+ if (info->present && info->online)
+ info->allowed = 1;
+ else
+ info->allowed = 0;
+ mutex_unlock(&info->lock);
+ dev_dbg(info->dev, "%s, Allowed: %d\n", __func__, info->allowed);
+
+ set_charging_fsm(info);
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t pm860x_vchg_handler(int irq, void *data)
+{
+ struct pm860x_charger_info *info = data;
+ int vchg = 0;
+
+ if (info->present)
+ goto out;
+
+ measure_vchg(info, &vchg);
+
+ mutex_lock(&info->lock);
+ if (!info->online) {
+ int status;
+ /* check if over-temp on pm8606 or not */
+ status = pm860x_reg_read(info->i2c_8606, PM8606_FLAGS);
+ if (status & OVER_TEMP_FLAG) {
+ /* clear over temp flag and set auto recover */
+ pm860x_set_bits(info->i2c_8606, PM8606_FLAGS,
+ OVER_TEMP_FLAG, OVER_TEMP_FLAG);
+ pm860x_set_bits(info->i2c_8606,
+ PM8606_VSYS,
+ OVTEMP_AUTORECOVER,
+ OVTEMP_AUTORECOVER);
+ dev_dbg(info->dev,
+ "%s, pm8606 over-temp occurred\n", __func__);
+ }
+ }
+
+ if (vchg > VCHG_NORMAL_CHECK) {
+ set_vchg_threshold(info, VCHG_OVP_LOW, 0);
+ info->allowed = 0;
+ dev_dbg(info->dev,
+ "%s,pm8607 over-vchg occurred,vchg = %dmv\n",
+ __func__, vchg);
+ } else if (vchg < VCHG_OVP_LOW) {
+ set_vchg_threshold(info, VCHG_NORMAL_LOW,
+ VCHG_NORMAL_HIGH);
+ info->allowed = 1;
+ dev_dbg(info->dev,
+ "%s,pm8607 over-vchg recover,vchg = %dmv\n",
+ __func__, vchg);
+ }
+ mutex_unlock(&info->lock);
+
+ dev_dbg(info->dev, "%s, Allowed: %d\n", __func__, info->allowed);
+ set_charging_fsm(info);
+out:
+ return IRQ_HANDLED;
+}
+
+static int pm860x_usb_get_prop(struct power_supply *psy,
+ enum power_supply_property psp,
+ union power_supply_propval *val)
+{
+ struct pm860x_charger_info *info = power_supply_get_drvdata(psy);
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_STATUS:
+ if (info->state == FSM_FASTCHARGE ||
+ info->state == FSM_PRECHARGE)
+ val->intval = POWER_SUPPLY_STATUS_CHARGING;
+ else
+ val->intval = POWER_SUPPLY_STATUS_DISCHARGING;
+ break;
+ case POWER_SUPPLY_PROP_ONLINE:
+ val->intval = info->online;
+ break;
+ default:
+ return -ENODEV;
+ }
+ return 0;
+}
+
+static enum power_supply_property pm860x_usb_props[] = {
+ POWER_SUPPLY_PROP_STATUS,
+ POWER_SUPPLY_PROP_ONLINE,
+};
+
+static int pm860x_init_charger(struct pm860x_charger_info *info)
+{
+ int ret;
+
+ ret = pm860x_reg_read(info->i2c, PM8607_STATUS_2);
+ if (ret < 0)
+ return ret;
+
+ mutex_lock(&info->lock);
+ info->state = FSM_INIT;
+ if (ret & STATUS2_CHG) {
+ info->online = 1;
+ info->allowed = 1;
+ } else {
+ info->online = 0;
+ info->allowed = 0;
+ }
+ mutex_unlock(&info->lock);
+
+ set_charging_fsm(info);
+ return 0;
+}
+
+static struct pm860x_irq_desc {
+ const char *name;
+ irqreturn_t (*handler)(int irq, void *data);
+} pm860x_irq_descs[] = {
+ { "usb supply detect", pm860x_charger_handler },
+ { "charge done", pm860x_done_handler },
+ { "charge timeout", pm860x_exception_handler },
+ { "charge fault", pm860x_exception_handler },
+ { "temperature", pm860x_temp_handler },
+ { "vbatt", pm860x_vbattery_handler },
+ { "vchg", pm860x_vchg_handler },
+};
+
+static const struct power_supply_desc pm860x_charger_desc = {
+ .name = "usb",
+ .type = POWER_SUPPLY_TYPE_USB,
+ .properties = pm860x_usb_props,
+ .num_properties = ARRAY_SIZE(pm860x_usb_props),
+ .get_property = pm860x_usb_get_prop,
+};
+
+static int pm860x_charger_probe(struct platform_device *pdev)
+{
+ struct pm860x_chip *chip = dev_get_drvdata(pdev->dev.parent);
+ struct power_supply_config psy_cfg = {};
+ struct pm860x_charger_info *info;
+ int ret;
+ int count;
+ int i;
+ int j;
+
+ info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL);
+ if (!info)
+ return -ENOMEM;
+
+ count = pdev->num_resources;
+ for (i = 0, j = 0; i < count; i++) {
+ info->irq[j] = platform_get_irq(pdev, i);
+ if (info->irq[j] < 0)
+ continue;
+ j++;
+ }
+ info->irq_nums = j;
+
+ info->chip = chip;
+ info->i2c =
+ (chip->id == CHIP_PM8607) ? chip->client : chip->companion;
+ info->i2c_8606 =
+ (chip->id == CHIP_PM8607) ? chip->companion : chip->client;
+ if (!info->i2c_8606) {
+ dev_err(&pdev->dev, "Missed I2C address of 88PM8606!\n");
+ ret = -EINVAL;
+ goto out;
+ }
+ info->dev = &pdev->dev;
+
+ /* set init value for the case we are not using battery */
+ set_vchg_threshold(info, VCHG_NORMAL_LOW, VCHG_OVP_LOW);
+
+ mutex_init(&info->lock);
+ platform_set_drvdata(pdev, info);
+
+ psy_cfg.drv_data = info;
+ psy_cfg.supplied_to = pm860x_supplied_to;
+ psy_cfg.num_supplicants = ARRAY_SIZE(pm860x_supplied_to);
+ info->usb = power_supply_register(&pdev->dev, &pm860x_charger_desc,
+ &psy_cfg);
+ if (IS_ERR(info->usb)) {
+ ret = PTR_ERR(info->usb);
+ goto out;
+ }
+
+ pm860x_init_charger(info);
+
+ for (i = 0; i < ARRAY_SIZE(info->irq); i++) {
+ ret = request_threaded_irq(info->irq[i], NULL,
+ pm860x_irq_descs[i].handler,
+ IRQF_ONESHOT, pm860x_irq_descs[i].name, info);
+ if (ret < 0) {
+ dev_err(chip->dev, "Failed to request IRQ: #%d: %d\n",
+ info->irq[i], ret);
+ goto out_irq;
+ }
+ }
+ return 0;
+
+out_irq:
+ power_supply_unregister(info->usb);
+ while (--i >= 0)
+ free_irq(info->irq[i], info);
+out:
+ return ret;
+}
+
+static int pm860x_charger_remove(struct platform_device *pdev)
+{
+ struct pm860x_charger_info *info = platform_get_drvdata(pdev);
+ int i;
+
+ power_supply_unregister(info->usb);
+ for (i = 0; i < info->irq_nums; i++)
+ free_irq(info->irq[i], info);
+ return 0;
+}
+
+static struct platform_driver pm860x_charger_driver = {
+ .driver = {
+ .name = "88pm860x-charger",
+ },
+ .probe = pm860x_charger_probe,
+ .remove = pm860x_charger_remove,
+};
+module_platform_driver(pm860x_charger_driver);
+
+MODULE_DESCRIPTION("Marvell 88PM860x Charger driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/power/supply/Kconfig b/drivers/power/supply/Kconfig
new file mode 100644
index 000000000..0aa46b451
--- /dev/null
+++ b/drivers/power/supply/Kconfig
@@ -0,0 +1,779 @@
+# SPDX-License-Identifier: GPL-2.0-only
+menuconfig POWER_SUPPLY
+ bool "Power supply class support"
+ help
+ Say Y here to enable power supply class support. This allows
+ power supply (batteries, AC, USB) monitoring by userspace
+ via sysfs and uevent (if available) and/or APM kernel interface
+ (if selected below).
+
+if POWER_SUPPLY
+
+config POWER_SUPPLY_DEBUG
+ bool "Power supply debug"
+ help
+ Say Y here to enable debugging messages for power supply class
+ and drivers.
+
+config POWER_SUPPLY_HWMON
+ bool
+ prompt "Expose power supply sensors as hwmon device"
+ depends on HWMON=y || HWMON=POWER_SUPPLY
+ default y
+ help
+ This options enables API that allows sensors found on a
+ power supply device (current, voltage, temperature) to be
+ exposed as a hwmon device.
+
+ Say 'Y' here if you want power supplies to
+ have hwmon sysfs interface too.
+
+
+config PDA_POWER
+ tristate "Generic PDA/phone power driver"
+ depends on !S390
+ help
+ Say Y here to enable generic power driver for PDAs and phones with
+ one or two external power supplies (AC/USB) connected to main and
+ backup batteries, and optional builtin charger.
+
+config APM_POWER
+ tristate "APM emulation for class batteries"
+ depends on APM_EMULATION
+ help
+ Say Y here to enable support APM status emulation using
+ battery class devices.
+
+config GENERIC_ADC_BATTERY
+ tristate "Generic battery support using IIO"
+ depends on IIO
+ help
+ Say Y here to enable support for the generic battery driver
+ which uses IIO framework to read adc.
+
+config MAX8925_POWER
+ tristate "MAX8925 battery charger support"
+ depends on MFD_MAX8925
+ help
+ Say Y here to enable support for the battery charger in the Maxim
+ MAX8925 PMIC.
+
+config WM831X_BACKUP
+ tristate "WM831X backup battery charger support"
+ depends on MFD_WM831X
+ help
+ Say Y here to enable support for the backup battery charger
+ in the Wolfson Microelectronics WM831x PMICs.
+
+config WM831X_POWER
+ tristate "WM831X PMU support"
+ depends on MFD_WM831X
+ help
+ Say Y here to enable support for the power management unit
+ provided by Wolfson Microelectronics WM831x PMICs.
+
+config WM8350_POWER
+ tristate "WM8350 PMU support"
+ depends on MFD_WM8350
+ help
+ Say Y here to enable support for the power management unit
+ provided by the Wolfson Microelectronics WM8350 PMIC.
+
+config TEST_POWER
+ tristate "Test power driver"
+ help
+ This driver is used for testing. It's safe to say M here.
+
+config BATTERY_88PM860X
+ tristate "Marvell 88PM860x battery driver"
+ depends on MFD_88PM860X
+ help
+ Say Y here to enable battery monitor for Marvell 88PM860x chip.
+
+config CHARGER_ADP5061
+ tristate "ADP5061 battery charger driver"
+ depends on I2C
+ select REGMAP_I2C
+ help
+ Say Y here to enable support for the ADP5061 standalone battery
+ charger.
+
+ This driver can be built as a module. If so, the module will be
+ called adp5061.
+
+config BATTERY_ACT8945A
+ tristate "Active-semi ACT8945A charger driver"
+ depends on MFD_ACT8945A || COMPILE_TEST
+ help
+ Say Y here to enable support for power supply provided by
+ Active-semi ActivePath ACT8945A charger.
+
+config BATTERY_CPCAP
+ tristate "Motorola CPCAP PMIC battery driver"
+ depends on MFD_CPCAP && IIO
+ default MFD_CPCAP
+ help
+ Say Y here to enable support for battery on Motorola
+ phones and tablets such as droid 4.
+
+config BATTERY_CW2015
+ tristate "CW2015 Battery driver"
+ depends on I2C
+ select REGMAP_I2C
+ help
+ Say Y here to enable support for the cellwise cw2015
+ battery fuel gauge (used in the Pinebook Pro & others)
+
+ This driver can also be built as a module. If so, the module will be
+ called cw2015_battery.
+
+config BATTERY_DS2760
+ tristate "DS2760 battery driver (HP iPAQ & others)"
+ depends on W1
+ help
+ Say Y here to enable support for batteries with ds2760 chip.
+
+config BATTERY_DS2780
+ tristate "DS2780 battery driver"
+ depends on HAS_IOMEM
+ select W1
+ select W1_SLAVE_DS2780
+ help
+ Say Y here to enable support for batteries with ds2780 chip.
+
+config BATTERY_DS2781
+ tristate "DS2781 battery driver"
+ depends on HAS_IOMEM
+ select W1
+ select W1_SLAVE_DS2781
+ help
+ If you enable this you will have the DS2781 battery driver support.
+
+ The battery monitor chip is used in many batteries/devices
+ as the one who is responsible for charging/discharging/monitoring
+ Li+ batteries.
+
+ If you are unsure, say N.
+
+config BATTERY_DS2782
+ tristate "DS2782/DS2786 standalone gas-gauge"
+ depends on I2C
+ help
+ Say Y here to enable support for the DS2782/DS2786 standalone battery
+ gas-gauge.
+
+config BATTERY_LEGO_EV3
+ tristate "LEGO MINDSTORMS EV3 battery"
+ depends on OF && IIO && GPIOLIB && (ARCH_DAVINCI_DA850 || COMPILE_TEST)
+ help
+ Say Y here to enable support for the LEGO MINDSTORMS EV3 battery.
+
+config BATTERY_PMU
+ tristate "Apple PMU battery"
+ depends on PPC32 && ADB_PMU
+ help
+ Say Y here to expose battery information on Apple machines
+ through the generic battery class.
+
+config BATTERY_OLPC
+ tristate "One Laptop Per Child battery"
+ depends on OLPC_EC
+ help
+ Say Y to enable support for the battery on the OLPC laptop.
+
+config BATTERY_TOSA
+ tristate "Sharp SL-6000 (tosa) battery"
+ depends on MACH_TOSA && MFD_TC6393XB && TOUCHSCREEN_WM97XX
+ help
+ Say Y to enable support for the battery on the Sharp Zaurus
+ SL-6000 (tosa) models.
+
+config BATTERY_COLLIE
+ tristate "Sharp SL-5500 (collie) battery"
+ depends on SA1100_COLLIE && MCP_UCB1200
+ help
+ Say Y to enable support for the battery on the Sharp Zaurus
+ SL-5500 (collie) models.
+
+config BATTERY_INGENIC
+ tristate "Ingenic JZ47xx SoCs battery driver"
+ depends on MIPS || COMPILE_TEST
+ depends on INGENIC_ADC
+ help
+ Choose this option if you want to monitor battery status on
+ Ingenic JZ47xx SoC based devices.
+
+ This driver can also be built as a module. If so, the module will be
+ called ingenic-battery.
+
+config BATTERY_IPAQ_MICRO
+ tristate "iPAQ Atmel Micro ASIC battery driver"
+ depends on MFD_IPAQ_MICRO
+ help
+ Choose this option if you want to monitor battery status on
+ Compaq/HP iPAQ h3100 and h3600.
+
+config BATTERY_WM97XX
+ bool "WM97xx generic battery driver"
+ depends on TOUCHSCREEN_WM97XX=y
+ help
+ Say Y to enable support for battery measured by WM97xx aux port.
+
+config BATTERY_SBS
+ tristate "SBS Compliant gas gauge"
+ depends on I2C
+ help
+ Say Y to include support for SBS battery driver for SBS-compliant
+ gas gauges.
+
+config CHARGER_SBS
+ tristate "SBS Compliant charger"
+ depends on I2C
+ select REGMAP_I2C
+ help
+ Say Y to include support for SBS compliant battery chargers.
+
+config MANAGER_SBS
+ tristate "Smart Battery System Manager"
+ depends on I2C && I2C_MUX && GPIOLIB
+ select I2C_SMBUS
+ help
+ Say Y here to include support for Smart Battery System Manager
+ ICs. The driver reports online and charging status via sysfs.
+ It presents itself also as I2C mux which allows to bind
+ smart battery driver to its ports.
+ Supported is for example LTC1760.
+
+ This driver can also be built as a module. If so, the module will be
+ called sbs-manager.
+
+config BATTERY_BQ27XXX
+ tristate "BQ27xxx battery driver"
+ help
+ Say Y here to enable support for batteries with BQ27xxx chips.
+
+config BATTERY_BQ27XXX_I2C
+ tristate "BQ27xxx I2C support"
+ depends on BATTERY_BQ27XXX
+ depends on I2C
+ default y
+ help
+ Say Y here to enable support for batteries with BQ27xxx chips
+ connected over an I2C bus.
+
+config BATTERY_BQ27XXX_HDQ
+ tristate "BQ27xxx HDQ support"
+ depends on BATTERY_BQ27XXX
+ depends on W1
+ default y
+ help
+ Say Y here to enable support for batteries with BQ27xxx chips
+ connected over an HDQ bus.
+
+config BATTERY_BQ27XXX_DT_UPDATES_NVM
+ bool "BQ27xxx support for update of NVM/flash data memory"
+ depends on BATTERY_BQ27XXX_I2C
+ help
+ Say Y here to enable devicetree monitored-battery config to update
+ NVM/flash data memory. Only enable this option for devices with a
+ fuel gauge mounted on the circuit board, and a battery that cannot
+ easily be replaced with one of a different type. Not for
+ general-purpose kernels, as this can cause misconfiguration of a
+ smart battery with embedded NVM/flash.
+
+config BATTERY_DA9030
+ tristate "DA9030 battery driver"
+ depends on PMIC_DA903X
+ help
+ Say Y here to enable support for batteries charger integrated into
+ DA9030 PMIC.
+
+config BATTERY_DA9052
+ tristate "Dialog DA9052 Battery"
+ depends on PMIC_DA9052
+ help
+ Say Y here to enable support for batteries charger integrated into
+ DA9052 PMIC.
+
+config CHARGER_DA9150
+ tristate "Dialog Semiconductor DA9150 Charger support"
+ depends on MFD_DA9150
+ depends on DA9150_GPADC
+ depends on IIO
+ help
+ Say Y here to enable support for charger unit of the DA9150
+ Integrated Charger & Fuel-Gauge IC.
+
+ This driver can also be built as a module. If so, the module will be
+ called da9150-charger.
+
+config BATTERY_DA9150
+ tristate "Dialog Semiconductor DA9150 Fuel Gauge support"
+ depends on MFD_DA9150
+ help
+ Say Y here to enable support for the Fuel-Gauge unit of the DA9150
+ Integrated Charger & Fuel-Gauge IC
+
+ This driver can also be built as a module. If so, the module will be
+ called da9150-fg.
+
+config CHARGER_AXP20X
+ tristate "X-Powers AXP20X and AXP22X AC power supply driver"
+ depends on MFD_AXP20X
+ depends on AXP20X_ADC
+ depends on IIO
+ help
+ Say Y here to enable support for X-Powers AXP20X and AXP22X PMICs' AC
+ power supply.
+
+ This driver can also be built as a module. If so, the module will be
+ called axp20x_ac_power.
+
+config BATTERY_AXP20X
+ tristate "X-Powers AXP20X battery driver"
+ depends on MFD_AXP20X
+ depends on AXP20X_ADC
+ depends on IIO
+ help
+ Say Y here to enable support for X-Powers AXP20X PMICs' battery power
+ supply.
+
+ This driver can also be built as a module. If so, the module will be
+ called axp20x_battery.
+
+config AXP20X_POWER
+ tristate "AXP20x power supply driver"
+ depends on MFD_AXP20X
+ depends on IIO
+ help
+ This driver provides support for the power supply features of
+ AXP20x PMIC.
+
+config AXP288_CHARGER
+ tristate "X-Powers AXP288 Charger"
+ depends on MFD_AXP20X && EXTCON_AXP288
+ help
+ Say yes here to have support X-Power AXP288 power management IC (PMIC)
+ integrated charger.
+
+config AXP288_FUEL_GAUGE
+ tristate "X-Powers AXP288 Fuel Gauge"
+ depends on MFD_AXP20X && IIO
+ help
+ Say yes here to have support for X-Power power management IC (PMIC)
+ Fuel Gauge. The device provides battery statistics and status
+ monitoring as well as alerts for battery over/under voltage and
+ over/under temperature.
+
+config BATTERY_MAX17040
+ tristate "Maxim MAX17040 Fuel Gauge"
+ depends on I2C
+ select REGMAP_I2C
+ help
+ Maxim models with ModelGauge are fuel-gauge systems for lithium-ion
+ (Li+) batteries in handheld and portable equipment, including
+ max17040, max17041, max17043, max17044, max17048, max17049, max17058,
+ max17059. It is also included in some batteries like max77836.
+
+ Driver supports reporting SOC (State of Charge, i.e capacity),
+ voltage and configurable low-SOC wakeup interrupt.
+
+config BATTERY_MAX17042
+ tristate "Maxim MAX17042/17047/17050/8997/8966 Fuel Gauge"
+ depends on I2C
+ select REGMAP_I2C
+ help
+ MAX17042 is fuel-gauge systems for lithium-ion (Li+) batteries
+ in handheld and portable equipment. The MAX17042 is configured
+ to operate with a single lithium cell. MAX8997 and MAX8966 are
+ multi-function devices that include fuel gauages that are compatible
+ with MAX17042. This driver also supports max17047/50 chips which are
+ improved version of max17042.
+
+config BATTERY_MAX1721X
+ tristate "MAX17211/MAX17215 standalone gas-gauge"
+ depends on W1
+ select REGMAP_W1
+ help
+ MAX1721x is fuel-gauge systems for lithium-ion (Li+) batteries
+ in handheld and portable equipment. MAX17211 used with single cell
+ battery. MAX17215 designed for muticell battery. Both them have
+ OneWire (W1) host interface.
+
+ Say Y here to enable support for the MAX17211/MAX17215 standalone
+ battery gas-gauge.
+
+config BATTERY_Z2
+ tristate "Z2 battery driver"
+ depends on I2C && MACH_ZIPIT2
+ help
+ Say Y to include support for the battery on the Zipit Z2.
+
+config BATTERY_S3C_ADC
+ tristate "Battery driver for Samsung ADC based monitoring"
+ depends on S3C_ADC
+ help
+ Say Y here to enable support for iPAQ h1930/h1940/rx1950 battery
+
+config BATTERY_TWL4030_MADC
+ tristate "TWL4030 MADC battery driver"
+ depends on TWL4030_MADC
+ help
+ Say Y here to enable this dumb driver for batteries managed
+ through the TWL4030 MADC.
+
+config CHARGER_88PM860X
+ tristate "Marvell 88PM860x Charger driver"
+ depends on MFD_88PM860X && BATTERY_88PM860X
+ help
+ Say Y here to enable charger for Marvell 88PM860x chip.
+
+config CHARGER_PCF50633
+ tristate "NXP PCF50633 MBC"
+ depends on MFD_PCF50633
+ help
+ Say Y to include support for NXP PCF50633 Main Battery Charger.
+
+config BATTERY_RX51
+ tristate "Nokia RX-51 (N900) battery driver"
+ depends on TWL4030_MADC
+ help
+ Say Y here to enable support for battery information on Nokia
+ RX-51, also known as N900 tablet.
+
+config CHARGER_CPCAP
+ tristate "CPCAP PMIC Charger Driver"
+ depends on MFD_CPCAP && IIO
+ depends on OMAP_USB2 || (!OMAP_USB2 && COMPILE_TEST)
+ default MFD_CPCAP
+ help
+ Say Y to enable support for CPCAP PMIC charger driver for Motorola
+ mobile devices such as Droid 4.
+
+config CHARGER_ISP1704
+ tristate "ISP1704 USB Charger Detection"
+ depends on USB_PHY
+ depends on USB_GADGET || !USB_GADGET # if USB_GADGET=m, this can't be 'y'
+ help
+ Say Y to enable support for USB Charger Detection with
+ ISP1707/ISP1704 USB transceivers.
+
+config CHARGER_MAX8903
+ tristate "MAX8903 Battery DC-DC Charger for USB and Adapter Power"
+ help
+ Say Y to enable support for the MAX8903 DC-DC charger and sysfs.
+ The driver supports controlling charger-enable and current-limit
+ pins based on the status of charger connections with interrupt
+ handlers.
+
+config CHARGER_TWL4030
+ tristate "OMAP TWL4030 BCI charger driver"
+ depends on IIO && TWL4030_CORE
+ help
+ Say Y here to enable support for TWL4030 Battery Charge Interface.
+
+config CHARGER_LP8727
+ tristate "TI/National Semiconductor LP8727 charger driver"
+ depends on I2C
+ help
+ Say Y here to enable support for LP8727 Charger Driver.
+
+config CHARGER_LP8788
+ tristate "TI LP8788 charger driver"
+ depends on MFD_LP8788
+ depends on LP8788_ADC
+ depends on IIO
+ help
+ Say Y to enable support for the LP8788 linear charger.
+
+config CHARGER_GPIO
+ tristate "GPIO charger"
+ depends on GPIOLIB || COMPILE_TEST
+ help
+ Say Y to include support for chargers which report their online status
+ through a GPIO pin.
+
+ This driver can be build as a module. If so, the module will be
+ called gpio-charger.
+
+config CHARGER_MANAGER
+ tristate "Battery charger manager for multiple chargers"
+ depends on REGULATOR
+ select EXTCON
+ help
+ Say Y to enable charger-manager support, which allows multiple
+ chargers attached to a battery and multiple batteries attached to a
+ system. The charger-manager also can monitor charging status in
+ runtime and in suspend-to-RAM by waking up the system periodically
+ with help of suspend_again support.
+
+config CHARGER_LT3651
+ tristate "Analog Devices LT3651 charger"
+ depends on GPIOLIB
+ help
+ Say Y to include support for the Analog Devices (Linear Technology)
+ LT3651 battery charger which reports its status via GPIO lines.
+
+config CHARGER_MAX14577
+ tristate "Maxim MAX14577/77836 battery charger driver"
+ depends on MFD_MAX14577
+ help
+ Say Y to enable support for the battery charger control sysfs and
+ platform data of MAX14577/77836 MUICs.
+
+config CHARGER_DETECTOR_MAX14656
+ tristate "Maxim MAX14656 USB charger detector"
+ depends on I2C
+ depends on OF
+ help
+ Say Y to enable support for the Maxim MAX14656 USB charger detector.
+ The device is compliant with the USB Battery Charging Specification
+ Revision 1.2 and can be found e.g. in Kindle 4/5th generation
+ readers and certain LG devices.
+
+config CHARGER_MAX77650
+ tristate "Maxim MAX77650 battery charger driver"
+ depends on MFD_MAX77650
+ help
+ Say Y to enable support for the battery charger control of MAX77650
+ PMICs.
+
+config CHARGER_MAX77693
+ tristate "Maxim MAX77693 battery charger driver"
+ depends on MFD_MAX77693
+ help
+ Say Y to enable support for the Maxim MAX77693 battery charger.
+
+config CHARGER_MAX8997
+ tristate "Maxim MAX8997/MAX8966 PMIC battery charger driver"
+ depends on MFD_MAX8997 && REGULATOR_MAX8997
+ help
+ Say Y to enable support for the battery charger control sysfs and
+ platform data of MAX8997/LP3974 PMICs.
+
+config CHARGER_MAX8998
+ tristate "Maxim MAX8998/LP3974 PMIC battery charger driver"
+ depends on MFD_MAX8998 && REGULATOR_MAX8998
+ help
+ Say Y to enable support for the battery charger control sysfs and
+ platform data of MAX8998/LP3974 PMICs.
+
+config CHARGER_MP2629
+ tristate "Monolithic power system MP2629 Battery charger"
+ depends on MFD_MP2629
+ depends on MP2629_ADC
+ depends on IIO
+ help
+ Select this option to enable support for Monolithic power system
+ Battery charger. This driver provides Battery charger power management
+ functions on the systems.
+
+config CHARGER_QCOM_SMBB
+ tristate "Qualcomm Switch-Mode Battery Charger and Boost"
+ depends on MFD_SPMI_PMIC || COMPILE_TEST
+ depends on OF
+ depends on EXTCON
+ depends on REGULATOR
+ help
+ Say Y to include support for the Switch-Mode Battery Charger and
+ Boost (SMBB) hardware found in Qualcomm PM8941 PMICs. The charger
+ is an integrated, single-cell lithium-ion battery charger. DT
+ configuration is required for loading, see the devicetree
+ documentation for more detail. The base name for this driver is
+ 'pm8941_charger'.
+
+config CHARGER_BQ2415X
+ tristate "TI BQ2415x battery charger driver"
+ depends on I2C
+ help
+ Say Y to enable support for the TI BQ2415x battery charger
+ PMICs.
+
+ You'll need this driver to charge batteries on e.g. Nokia
+ RX-51/N900.
+
+config CHARGER_BQ24190
+ tristate "TI BQ24190 battery charger driver"
+ depends on I2C
+ depends on EXTCON
+ depends on GPIOLIB || COMPILE_TEST
+ help
+ Say Y to enable support for the TI BQ24190 battery charger.
+
+config CHARGER_BQ24257
+ tristate "TI BQ24250/24251/24257 battery charger driver"
+ depends on I2C
+ depends on GPIOLIB || COMPILE_TEST
+ select REGMAP_I2C
+ help
+ Say Y to enable support for the TI BQ24250, BQ24251, and BQ24257 battery
+ chargers.
+
+config CHARGER_BQ24735
+ tristate "TI BQ24735 battery charger support"
+ depends on I2C
+ depends on GPIOLIB || COMPILE_TEST
+ help
+ Say Y to enable support for the TI BQ24735 battery charger.
+
+config CHARGER_BQ2515X
+ tristate "TI BQ2515X battery charger family"
+ depends on I2C
+ depends on GPIOLIB || COMPILE_TEST
+ select REGMAP_I2C
+ help
+ Say Y to enable support for the TI BQ2515X family of battery
+ charging integrated circuits. The BQ2515X are highly integrated
+ battery charge management ICs that integrate the most common
+ functions for wearable devices, namely a charger, an output voltage
+ rail, ADC for battery and system monitoring, and push-button
+ controller.
+
+config CHARGER_BQ25890
+ tristate "TI BQ25890 battery charger driver"
+ depends on I2C
+ depends on GPIOLIB || COMPILE_TEST
+ select REGMAP_I2C
+ help
+ Say Y to enable support for the TI BQ25890 battery charger.
+
+config CHARGER_BQ25980
+ tristate "TI BQ25980 battery charger driver"
+ depends on I2C
+ depends on GPIOLIB || COMPILE_TEST
+ select REGMAP_I2C
+ help
+ Say Y to enable support for the TI BQ25980, BQ25975 and BQ25960
+ series of fast battery chargers.
+
+config CHARGER_SMB347
+ tristate "Summit Microelectronics SMB3XX Battery Charger"
+ depends on I2C
+ select REGMAP_I2C
+ help
+ Say Y to include support for Summit Microelectronics SMB345,
+ SMB347 or SMB358 Battery Charger.
+
+config CHARGER_TPS65090
+ tristate "TPS65090 battery charger driver"
+ depends on MFD_TPS65090
+ help
+ Say Y here to enable support for battery charging with TPS65090
+ PMIC chips.
+
+config CHARGER_TPS65217
+ tristate "TPS65217 battery charger driver"
+ depends on MFD_TPS65217
+ help
+ Say Y here to enable support for battery charging with TPS65217
+ PMIC chips.
+
+config BATTERY_GAUGE_LTC2941
+ tristate "LTC2941/LTC2943 Battery Gauge Driver"
+ depends on I2C
+ help
+ Say Y here to include support for LTC2941 and LTC2943 Battery
+ Gauge IC. The driver reports the charge count continuously, and
+ measures the voltage and temperature every 10 seconds.
+
+config AB8500_BM
+ bool "AB8500 Battery Management Driver"
+ depends on AB8500_CORE && AB8500_GPADC && (IIO = y)
+ help
+ Say Y to include support for AB8500 battery management.
+
+config BATTERY_GOLDFISH
+ tristate "Goldfish battery driver"
+ depends on GOLDFISH || COMPILE_TEST
+ depends on HAS_IOMEM
+ help
+ Say Y to enable support for the battery and AC power in the
+ Goldfish emulator.
+
+config BATTERY_RT5033
+ tristate "RT5033 fuel gauge support"
+ depends on I2C
+ select REGMAP_I2C
+ help
+ This adds support for battery fuel gauge in Richtek RT5033 PMIC.
+ The fuelgauge calculates and determines the battery state of charge
+ according to battery open circuit voltage.
+
+config CHARGER_RT9455
+ tristate "Richtek RT9455 battery charger driver"
+ depends on I2C
+ depends on GPIOLIB || COMPILE_TEST
+ select REGMAP_I2C
+ help
+ Say Y to enable support for Richtek RT9455 battery charger.
+
+config CHARGER_CROS_USBPD
+ tristate "ChromeOS EC based USBPD charger"
+ depends on CROS_USBPD_NOTIFY
+ help
+ Say Y here to enable ChromeOS EC based USBPD charger
+ driver. This driver gets various bits of information about
+ what is connected to USB PD ports from the EC and converts
+ that into power_supply properties.
+
+config CHARGER_SC2731
+ tristate "Spreadtrum SC2731 charger driver"
+ depends on MFD_SC27XX_PMIC || COMPILE_TEST
+ help
+ Say Y here to enable support for battery charging with SC2731
+ PMIC chips.
+
+config FUEL_GAUGE_SC27XX
+ tristate "Spreadtrum SC27XX fuel gauge driver"
+ depends on MFD_SC27XX_PMIC || COMPILE_TEST
+ depends on IIO
+ help
+ Say Y here to enable support for fuel gauge with SC27XX
+ PMIC chips.
+
+config CHARGER_UCS1002
+ tristate "Microchip UCS1002 USB Port Power Controller"
+ depends on I2C
+ depends on OF
+ depends on REGULATOR
+ select REGMAP_I2C
+ help
+ Say Y to enable support for Microchip UCS1002 Programmable
+ USB Port Power Controller with Charger Emulation.
+
+config CHARGER_BD70528
+ tristate "ROHM bd70528 charger driver"
+ depends on MFD_ROHM_BD70528
+ select LINEAR_RANGES
+ help
+ Say Y here to enable support for getting battery status
+ information and altering charger configurations from charger
+ block of the ROHM BD70528 Power Management IC.
+
+config CHARGER_BD99954
+ tristate "ROHM bd99954 charger driver"
+ depends on I2C
+ select LINEAR_RANGES
+ help
+ Say Y here to enable support for getting battery and charger
+ information and altering charger configurations from the ROHM
+ BD99954 charger IC.
+
+config CHARGER_WILCO
+ tristate "Wilco EC based charger for ChromeOS"
+ depends on WILCO_EC
+ help
+ Say Y here to enable control of the charging routines performed
+ by the Embedded Controller on the Chromebook named Wilco. Further
+ information can be found in
+ Documentation/ABI/testing/sysfs-class-power-wilco
+
+config RN5T618_POWER
+ tristate "RN5T618 charger/fuel gauge support"
+ depends on MFD_RN5T618
+ help
+ Say Y here to have support for RN5T618 PMIC family fuel gauge and charger.
+ This driver can also be built as a module. If so, the module will be
+ called rn5t618_power.
+
+endif # POWER_SUPPLY
diff --git a/drivers/power/supply/Makefile b/drivers/power/supply/Makefile
new file mode 100644
index 000000000..dd4b86318
--- /dev/null
+++ b/drivers/power/supply/Makefile
@@ -0,0 +1,100 @@
+# SPDX-License-Identifier: GPL-2.0
+subdir-ccflags-$(CONFIG_POWER_SUPPLY_DEBUG) := -DDEBUG
+
+power_supply-y := power_supply_core.o
+power_supply-$(CONFIG_SYSFS) += power_supply_sysfs.o
+power_supply-$(CONFIG_LEDS_TRIGGERS) += power_supply_leds.o
+
+obj-$(CONFIG_POWER_SUPPLY) += power_supply.o
+obj-$(CONFIG_POWER_SUPPLY_HWMON) += power_supply_hwmon.o
+obj-$(CONFIG_GENERIC_ADC_BATTERY) += generic-adc-battery.o
+
+obj-$(CONFIG_PDA_POWER) += pda_power.o
+obj-$(CONFIG_APM_POWER) += apm_power.o
+obj-$(CONFIG_AXP20X_POWER) += axp20x_usb_power.o
+obj-$(CONFIG_MAX8925_POWER) += max8925_power.o
+obj-$(CONFIG_WM831X_BACKUP) += wm831x_backup.o
+obj-$(CONFIG_WM831X_POWER) += wm831x_power.o
+obj-$(CONFIG_WM8350_POWER) += wm8350_power.o
+obj-$(CONFIG_TEST_POWER) += test_power.o
+
+obj-$(CONFIG_BATTERY_88PM860X) += 88pm860x_battery.o
+obj-$(CONFIG_CHARGER_ADP5061) += adp5061.o
+obj-$(CONFIG_BATTERY_ACT8945A) += act8945a_charger.o
+obj-$(CONFIG_BATTERY_AXP20X) += axp20x_battery.o
+obj-$(CONFIG_CHARGER_AXP20X) += axp20x_ac_power.o
+obj-$(CONFIG_BATTERY_CPCAP) += cpcap-battery.o
+obj-$(CONFIG_BATTERY_CW2015) += cw2015_battery.o
+obj-$(CONFIG_BATTERY_DS2760) += ds2760_battery.o
+obj-$(CONFIG_BATTERY_DS2780) += ds2780_battery.o
+obj-$(CONFIG_BATTERY_DS2781) += ds2781_battery.o
+obj-$(CONFIG_BATTERY_DS2782) += ds2782_battery.o
+obj-$(CONFIG_BATTERY_GAUGE_LTC2941) += ltc2941-battery-gauge.o
+obj-$(CONFIG_BATTERY_GOLDFISH) += goldfish_battery.o
+obj-$(CONFIG_BATTERY_LEGO_EV3) += lego_ev3_battery.o
+obj-$(CONFIG_BATTERY_PMU) += pmu_battery.o
+obj-$(CONFIG_BATTERY_OLPC) += olpc_battery.o
+obj-$(CONFIG_BATTERY_TOSA) += tosa_battery.o
+obj-$(CONFIG_BATTERY_COLLIE) += collie_battery.o
+obj-$(CONFIG_BATTERY_INGENIC) += ingenic-battery.o
+obj-$(CONFIG_BATTERY_IPAQ_MICRO) += ipaq_micro_battery.o
+obj-$(CONFIG_BATTERY_WM97XX) += wm97xx_battery.o
+obj-$(CONFIG_BATTERY_SBS) += sbs-battery.o
+obj-$(CONFIG_CHARGER_SBS) += sbs-charger.o
+obj-$(CONFIG_MANAGER_SBS) += sbs-manager.o
+obj-$(CONFIG_BATTERY_BQ27XXX) += bq27xxx_battery.o
+obj-$(CONFIG_BATTERY_BQ27XXX_I2C) += bq27xxx_battery_i2c.o
+obj-$(CONFIG_BATTERY_BQ27XXX_HDQ) += bq27xxx_battery_hdq.o
+obj-$(CONFIG_BATTERY_DA9030) += da9030_battery.o
+obj-$(CONFIG_BATTERY_DA9052) += da9052-battery.o
+obj-$(CONFIG_CHARGER_DA9150) += da9150-charger.o
+obj-$(CONFIG_BATTERY_DA9150) += da9150-fg.o
+obj-$(CONFIG_BATTERY_MAX17040) += max17040_battery.o
+obj-$(CONFIG_BATTERY_MAX17042) += max17042_battery.o
+obj-$(CONFIG_BATTERY_MAX1721X) += max1721x_battery.o
+obj-$(CONFIG_BATTERY_Z2) += z2_battery.o
+obj-$(CONFIG_BATTERY_RT5033) += rt5033_battery.o
+obj-$(CONFIG_CHARGER_RT9455) += rt9455_charger.o
+obj-$(CONFIG_BATTERY_S3C_ADC) += s3c_adc_battery.o
+obj-$(CONFIG_BATTERY_TWL4030_MADC) += twl4030_madc_battery.o
+obj-$(CONFIG_CHARGER_88PM860X) += 88pm860x_charger.o
+obj-$(CONFIG_CHARGER_PCF50633) += pcf50633-charger.o
+obj-$(CONFIG_BATTERY_RX51) += rx51_battery.o
+obj-$(CONFIG_AB8500_BM) += ab8500_bmdata.o ab8500_charger.o ab8500_fg.o ab8500_btemp.o abx500_chargalg.o pm2301_charger.o
+obj-$(CONFIG_CHARGER_CPCAP) += cpcap-charger.o
+obj-$(CONFIG_CHARGER_ISP1704) += isp1704_charger.o
+obj-$(CONFIG_CHARGER_MAX8903) += max8903_charger.o
+obj-$(CONFIG_CHARGER_TWL4030) += twl4030_charger.o
+obj-$(CONFIG_CHARGER_LP8727) += lp8727_charger.o
+obj-$(CONFIG_CHARGER_LP8788) += lp8788-charger.o
+obj-$(CONFIG_CHARGER_GPIO) += gpio-charger.o
+obj-$(CONFIG_CHARGER_MANAGER) += charger-manager.o
+obj-$(CONFIG_CHARGER_LT3651) += lt3651-charger.o
+obj-$(CONFIG_CHARGER_MAX14577) += max14577_charger.o
+obj-$(CONFIG_CHARGER_DETECTOR_MAX14656) += max14656_charger_detector.o
+obj-$(CONFIG_CHARGER_MAX77650) += max77650-charger.o
+obj-$(CONFIG_CHARGER_MAX77693) += max77693_charger.o
+obj-$(CONFIG_CHARGER_MAX8997) += max8997_charger.o
+obj-$(CONFIG_CHARGER_MAX8998) += max8998_charger.o
+obj-$(CONFIG_CHARGER_MP2629) += mp2629_charger.o
+obj-$(CONFIG_CHARGER_QCOM_SMBB) += qcom_smbb.o
+obj-$(CONFIG_CHARGER_BQ2415X) += bq2415x_charger.o
+obj-$(CONFIG_CHARGER_BQ24190) += bq24190_charger.o
+obj-$(CONFIG_CHARGER_BQ24257) += bq24257_charger.o
+obj-$(CONFIG_CHARGER_BQ24735) += bq24735-charger.o
+obj-$(CONFIG_CHARGER_BQ2515X) += bq2515x_charger.o
+obj-$(CONFIG_CHARGER_BQ25890) += bq25890_charger.o
+obj-$(CONFIG_CHARGER_BQ25980) += bq25980_charger.o
+obj-$(CONFIG_CHARGER_SMB347) += smb347-charger.o
+obj-$(CONFIG_CHARGER_TPS65090) += tps65090-charger.o
+obj-$(CONFIG_CHARGER_TPS65217) += tps65217_charger.o
+obj-$(CONFIG_AXP288_FUEL_GAUGE) += axp288_fuel_gauge.o
+obj-$(CONFIG_AXP288_CHARGER) += axp288_charger.o
+obj-$(CONFIG_CHARGER_CROS_USBPD) += cros_usbpd-charger.o
+obj-$(CONFIG_CHARGER_SC2731) += sc2731_charger.o
+obj-$(CONFIG_FUEL_GAUGE_SC27XX) += sc27xx_fuel_gauge.o
+obj-$(CONFIG_CHARGER_UCS1002) += ucs1002_power.o
+obj-$(CONFIG_CHARGER_BD70528) += bd70528-charger.o
+obj-$(CONFIG_CHARGER_BD99954) += bd99954-charger.o
+obj-$(CONFIG_CHARGER_WILCO) += wilco-charger.o
+obj-$(CONFIG_RN5T618_POWER) += rn5t618_power.o
diff --git a/drivers/power/supply/ab8500_bmdata.c b/drivers/power/supply/ab8500_bmdata.c
new file mode 100644
index 000000000..f6a66979c
--- /dev/null
+++ b/drivers/power/supply/ab8500_bmdata.c
@@ -0,0 +1,544 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <linux/export.h>
+#include <linux/power_supply.h>
+#include <linux/of.h>
+#include <linux/mfd/abx500.h>
+#include <linux/mfd/abx500/ab8500.h>
+#include <linux/mfd/abx500/ab8500-bm.h>
+
+/*
+ * These are the defined batteries that uses a NTC and ID resistor placed
+ * inside of the battery pack.
+ * Note that the res_to_temp table must be strictly sorted by falling resistance
+ * values to work.
+ */
+const struct abx500_res_to_temp ab8500_temp_tbl_a_thermistor[] = {
+ {-5, 53407},
+ { 0, 48594},
+ { 5, 43804},
+ {10, 39188},
+ {15, 34870},
+ {20, 30933},
+ {25, 27422},
+ {30, 24347},
+ {35, 21694},
+ {40, 19431},
+ {45, 17517},
+ {50, 15908},
+ {55, 14561},
+ {60, 13437},
+ {65, 12500},
+};
+EXPORT_SYMBOL(ab8500_temp_tbl_a_thermistor);
+
+const int ab8500_temp_tbl_a_size = ARRAY_SIZE(ab8500_temp_tbl_a_thermistor);
+EXPORT_SYMBOL(ab8500_temp_tbl_a_size);
+
+const struct abx500_res_to_temp ab8500_temp_tbl_b_thermistor[] = {
+ {-5, 200000},
+ { 0, 159024},
+ { 5, 151921},
+ {10, 144300},
+ {15, 136424},
+ {20, 128565},
+ {25, 120978},
+ {30, 113875},
+ {35, 107397},
+ {40, 101629},
+ {45, 96592},
+ {50, 92253},
+ {55, 88569},
+ {60, 85461},
+ {65, 82869},
+};
+EXPORT_SYMBOL(ab8500_temp_tbl_b_thermistor);
+
+const int ab8500_temp_tbl_b_size = ARRAY_SIZE(ab8500_temp_tbl_b_thermistor);
+EXPORT_SYMBOL(ab8500_temp_tbl_b_size);
+
+static const struct abx500_v_to_cap cap_tbl_a_thermistor[] = {
+ {4171, 100},
+ {4114, 95},
+ {4009, 83},
+ {3947, 74},
+ {3907, 67},
+ {3863, 59},
+ {3830, 56},
+ {3813, 53},
+ {3791, 46},
+ {3771, 33},
+ {3754, 25},
+ {3735, 20},
+ {3717, 17},
+ {3681, 13},
+ {3664, 8},
+ {3651, 6},
+ {3635, 5},
+ {3560, 3},
+ {3408, 1},
+ {3247, 0},
+};
+
+static const struct abx500_v_to_cap cap_tbl_b_thermistor[] = {
+ {4161, 100},
+ {4124, 98},
+ {4044, 90},
+ {4003, 85},
+ {3966, 80},
+ {3933, 75},
+ {3888, 67},
+ {3849, 60},
+ {3813, 55},
+ {3787, 47},
+ {3772, 30},
+ {3751, 25},
+ {3718, 20},
+ {3681, 16},
+ {3660, 14},
+ {3589, 10},
+ {3546, 7},
+ {3495, 4},
+ {3404, 2},
+ {3250, 0},
+};
+
+static const struct abx500_v_to_cap cap_tbl[] = {
+ {4186, 100},
+ {4163, 99},
+ {4114, 95},
+ {4068, 90},
+ {3990, 80},
+ {3926, 70},
+ {3898, 65},
+ {3866, 60},
+ {3833, 55},
+ {3812, 50},
+ {3787, 40},
+ {3768, 30},
+ {3747, 25},
+ {3730, 20},
+ {3705, 15},
+ {3699, 14},
+ {3684, 12},
+ {3672, 9},
+ {3657, 7},
+ {3638, 6},
+ {3556, 4},
+ {3424, 2},
+ {3317, 1},
+ {3094, 0},
+};
+
+/*
+ * Note that the res_to_temp table must be strictly sorted by falling
+ * resistance values to work.
+ */
+static const struct abx500_res_to_temp temp_tbl[] = {
+ {-5, 214834},
+ { 0, 162943},
+ { 5, 124820},
+ {10, 96520},
+ {15, 75306},
+ {20, 59254},
+ {25, 47000},
+ {30, 37566},
+ {35, 30245},
+ {40, 24520},
+ {45, 20010},
+ {50, 16432},
+ {55, 13576},
+ {60, 11280},
+ {65, 9425},
+};
+
+/*
+ * Note that the batres_vs_temp table must be strictly sorted by falling
+ * temperature values to work.
+ */
+static const struct batres_vs_temp temp_to_batres_tbl_thermistor[] = {
+ { 40, 120},
+ { 30, 135},
+ { 20, 165},
+ { 10, 230},
+ { 00, 325},
+ {-10, 445},
+ {-20, 595},
+};
+
+/*
+ * Note that the batres_vs_temp table must be strictly sorted by falling
+ * temperature values to work.
+ */
+static const struct batres_vs_temp temp_to_batres_tbl_ext_thermistor[] = {
+ { 60, 300},
+ { 30, 300},
+ { 20, 300},
+ { 10, 300},
+ { 00, 300},
+ {-10, 300},
+ {-20, 300},
+};
+
+/* battery resistance table for LI ION 9100 battery */
+static const struct batres_vs_temp temp_to_batres_tbl_9100[] = {
+ { 60, 180},
+ { 30, 180},
+ { 20, 180},
+ { 10, 180},
+ { 00, 180},
+ {-10, 180},
+ {-20, 180},
+};
+
+static struct abx500_battery_type bat_type_thermistor[] = {
+ [BATTERY_UNKNOWN] = {
+ /* First element always represent the UNKNOWN battery */
+ .name = POWER_SUPPLY_TECHNOLOGY_UNKNOWN,
+ .resis_high = 0,
+ .resis_low = 0,
+ .battery_resistance = 300,
+ .charge_full_design = 612,
+ .nominal_voltage = 3700,
+ .termination_vol = 4050,
+ .termination_curr = 200,
+ .recharge_cap = 95,
+ .normal_cur_lvl = 400,
+ .normal_vol_lvl = 4100,
+ .maint_a_cur_lvl = 400,
+ .maint_a_vol_lvl = 4050,
+ .maint_a_chg_timer_h = 60,
+ .maint_b_cur_lvl = 400,
+ .maint_b_vol_lvl = 4000,
+ .maint_b_chg_timer_h = 200,
+ .low_high_cur_lvl = 300,
+ .low_high_vol_lvl = 4000,
+ .n_temp_tbl_elements = ARRAY_SIZE(temp_tbl),
+ .r_to_t_tbl = temp_tbl,
+ .n_v_cap_tbl_elements = ARRAY_SIZE(cap_tbl),
+ .v_to_cap_tbl = cap_tbl,
+ .n_batres_tbl_elements = ARRAY_SIZE(temp_to_batres_tbl_thermistor),
+ .batres_tbl = temp_to_batres_tbl_thermistor,
+ },
+ {
+ .name = POWER_SUPPLY_TECHNOLOGY_LIPO,
+ .resis_high = 53407,
+ .resis_low = 12500,
+ .battery_resistance = 300,
+ .charge_full_design = 900,
+ .nominal_voltage = 3600,
+ .termination_vol = 4150,
+ .termination_curr = 80,
+ .recharge_cap = 95,
+ .normal_cur_lvl = 700,
+ .normal_vol_lvl = 4200,
+ .maint_a_cur_lvl = 600,
+ .maint_a_vol_lvl = 4150,
+ .maint_a_chg_timer_h = 60,
+ .maint_b_cur_lvl = 600,
+ .maint_b_vol_lvl = 4100,
+ .maint_b_chg_timer_h = 200,
+ .low_high_cur_lvl = 300,
+ .low_high_vol_lvl = 4000,
+ .n_temp_tbl_elements = ARRAY_SIZE(ab8500_temp_tbl_a_thermistor),
+ .r_to_t_tbl = ab8500_temp_tbl_a_thermistor,
+ .n_v_cap_tbl_elements = ARRAY_SIZE(cap_tbl_a_thermistor),
+ .v_to_cap_tbl = cap_tbl_a_thermistor,
+ .n_batres_tbl_elements = ARRAY_SIZE(temp_to_batres_tbl_thermistor),
+ .batres_tbl = temp_to_batres_tbl_thermistor,
+
+ },
+ {
+ .name = POWER_SUPPLY_TECHNOLOGY_LIPO,
+ .resis_high = 200000,
+ .resis_low = 82869,
+ .battery_resistance = 300,
+ .charge_full_design = 900,
+ .nominal_voltage = 3600,
+ .termination_vol = 4150,
+ .termination_curr = 80,
+ .recharge_cap = 95,
+ .normal_cur_lvl = 700,
+ .normal_vol_lvl = 4200,
+ .maint_a_cur_lvl = 600,
+ .maint_a_vol_lvl = 4150,
+ .maint_a_chg_timer_h = 60,
+ .maint_b_cur_lvl = 600,
+ .maint_b_vol_lvl = 4100,
+ .maint_b_chg_timer_h = 200,
+ .low_high_cur_lvl = 300,
+ .low_high_vol_lvl = 4000,
+ .n_temp_tbl_elements = ARRAY_SIZE(ab8500_temp_tbl_b_thermistor),
+ .r_to_t_tbl = ab8500_temp_tbl_b_thermistor,
+ .n_v_cap_tbl_elements = ARRAY_SIZE(cap_tbl_b_thermistor),
+ .v_to_cap_tbl = cap_tbl_b_thermistor,
+ .n_batres_tbl_elements = ARRAY_SIZE(temp_to_batres_tbl_thermistor),
+ .batres_tbl = temp_to_batres_tbl_thermistor,
+ },
+};
+
+static struct abx500_battery_type bat_type_ext_thermistor[] = {
+ [BATTERY_UNKNOWN] = {
+ /* First element always represent the UNKNOWN battery */
+ .name = POWER_SUPPLY_TECHNOLOGY_UNKNOWN,
+ .resis_high = 0,
+ .resis_low = 0,
+ .battery_resistance = 300,
+ .charge_full_design = 612,
+ .nominal_voltage = 3700,
+ .termination_vol = 4050,
+ .termination_curr = 200,
+ .recharge_cap = 95,
+ .normal_cur_lvl = 400,
+ .normal_vol_lvl = 4100,
+ .maint_a_cur_lvl = 400,
+ .maint_a_vol_lvl = 4050,
+ .maint_a_chg_timer_h = 60,
+ .maint_b_cur_lvl = 400,
+ .maint_b_vol_lvl = 4000,
+ .maint_b_chg_timer_h = 200,
+ .low_high_cur_lvl = 300,
+ .low_high_vol_lvl = 4000,
+ .n_temp_tbl_elements = ARRAY_SIZE(temp_tbl),
+ .r_to_t_tbl = temp_tbl,
+ .n_v_cap_tbl_elements = ARRAY_SIZE(cap_tbl),
+ .v_to_cap_tbl = cap_tbl,
+ .n_batres_tbl_elements = ARRAY_SIZE(temp_to_batres_tbl_thermistor),
+ .batres_tbl = temp_to_batres_tbl_thermistor,
+ },
+/*
+ * These are the batteries that doesn't have an internal NTC resistor to measure
+ * its temperature. The temperature in this case is measure with a NTC placed
+ * near the battery but on the PCB.
+ */
+ {
+ .name = POWER_SUPPLY_TECHNOLOGY_LIPO,
+ .resis_high = 76000,
+ .resis_low = 53000,
+ .battery_resistance = 300,
+ .charge_full_design = 900,
+ .nominal_voltage = 3700,
+ .termination_vol = 4150,
+ .termination_curr = 100,
+ .recharge_cap = 95,
+ .normal_cur_lvl = 700,
+ .normal_vol_lvl = 4200,
+ .maint_a_cur_lvl = 600,
+ .maint_a_vol_lvl = 4150,
+ .maint_a_chg_timer_h = 60,
+ .maint_b_cur_lvl = 600,
+ .maint_b_vol_lvl = 4100,
+ .maint_b_chg_timer_h = 200,
+ .low_high_cur_lvl = 300,
+ .low_high_vol_lvl = 4000,
+ .n_temp_tbl_elements = ARRAY_SIZE(temp_tbl),
+ .r_to_t_tbl = temp_tbl,
+ .n_v_cap_tbl_elements = ARRAY_SIZE(cap_tbl),
+ .v_to_cap_tbl = cap_tbl,
+ .n_batres_tbl_elements = ARRAY_SIZE(temp_to_batres_tbl_thermistor),
+ .batres_tbl = temp_to_batres_tbl_thermistor,
+ },
+ {
+ .name = POWER_SUPPLY_TECHNOLOGY_LION,
+ .resis_high = 30000,
+ .resis_low = 10000,
+ .battery_resistance = 300,
+ .charge_full_design = 950,
+ .nominal_voltage = 3700,
+ .termination_vol = 4150,
+ .termination_curr = 100,
+ .recharge_cap = 95,
+ .normal_cur_lvl = 700,
+ .normal_vol_lvl = 4200,
+ .maint_a_cur_lvl = 600,
+ .maint_a_vol_lvl = 4150,
+ .maint_a_chg_timer_h = 60,
+ .maint_b_cur_lvl = 600,
+ .maint_b_vol_lvl = 4100,
+ .maint_b_chg_timer_h = 200,
+ .low_high_cur_lvl = 300,
+ .low_high_vol_lvl = 4000,
+ .n_temp_tbl_elements = ARRAY_SIZE(temp_tbl),
+ .r_to_t_tbl = temp_tbl,
+ .n_v_cap_tbl_elements = ARRAY_SIZE(cap_tbl),
+ .v_to_cap_tbl = cap_tbl,
+ .n_batres_tbl_elements = ARRAY_SIZE(temp_to_batres_tbl_thermistor),
+ .batres_tbl = temp_to_batres_tbl_thermistor,
+ },
+ {
+ .name = POWER_SUPPLY_TECHNOLOGY_LION,
+ .resis_high = 95000,
+ .resis_low = 76001,
+ .battery_resistance = 300,
+ .charge_full_design = 950,
+ .nominal_voltage = 3700,
+ .termination_vol = 4150,
+ .termination_curr = 100,
+ .recharge_cap = 95,
+ .normal_cur_lvl = 700,
+ .normal_vol_lvl = 4200,
+ .maint_a_cur_lvl = 600,
+ .maint_a_vol_lvl = 4150,
+ .maint_a_chg_timer_h = 60,
+ .maint_b_cur_lvl = 600,
+ .maint_b_vol_lvl = 4100,
+ .maint_b_chg_timer_h = 200,
+ .low_high_cur_lvl = 300,
+ .low_high_vol_lvl = 4000,
+ .n_temp_tbl_elements = ARRAY_SIZE(temp_tbl),
+ .r_to_t_tbl = temp_tbl,
+ .n_v_cap_tbl_elements = ARRAY_SIZE(cap_tbl),
+ .v_to_cap_tbl = cap_tbl,
+ .n_batres_tbl_elements = ARRAY_SIZE(temp_to_batres_tbl_thermistor),
+ .batres_tbl = temp_to_batres_tbl_thermistor,
+ },
+};
+
+static const struct abx500_bm_capacity_levels cap_levels = {
+ .critical = 2,
+ .low = 10,
+ .normal = 70,
+ .high = 95,
+ .full = 100,
+};
+
+static const struct abx500_fg_parameters fg = {
+ .recovery_sleep_timer = 10,
+ .recovery_total_time = 100,
+ .init_timer = 1,
+ .init_discard_time = 5,
+ .init_total_time = 40,
+ .high_curr_time = 60,
+ .accu_charging = 30,
+ .accu_high_curr = 30,
+ .high_curr_threshold = 50,
+ .lowbat_threshold = 3100,
+ .battok_falling_th_sel0 = 2860,
+ .battok_raising_th_sel1 = 2860,
+ .maint_thres = 95,
+ .user_cap_limit = 15,
+ .pcut_enable = 1,
+ .pcut_max_time = 127,
+ .pcut_flag_time = 112,
+ .pcut_max_restart = 15,
+ .pcut_debounce_time = 2,
+};
+
+static const struct abx500_maxim_parameters ab8500_maxi_params = {
+ .ena_maxi = true,
+ .chg_curr = 910,
+ .wait_cycles = 10,
+ .charger_curr_step = 100,
+};
+
+static const struct abx500_bm_charger_parameters chg = {
+ .usb_volt_max = 5500,
+ .usb_curr_max = 1500,
+ .ac_volt_max = 7500,
+ .ac_curr_max = 1500,
+};
+
+/*
+ * This array maps the raw hex value to charger output current used by the
+ * AB8500 values
+ */
+static int ab8500_charge_output_curr_map[] = {
+ 100, 200, 300, 400, 500, 600, 700, 800,
+ 900, 1000, 1100, 1200, 1300, 1400, 1500, 1500,
+};
+
+/*
+ * This array maps the raw hex value to charger input current used by the
+ * AB8500 values
+ */
+static int ab8500_charge_input_curr_map[] = {
+ 50, 98, 193, 290, 380, 450, 500, 600,
+ 700, 800, 900, 1000, 1100, 1300, 1400, 1500,
+};
+
+struct abx500_bm_data ab8500_bm_data = {
+ .temp_under = 3,
+ .temp_low = 8,
+ .temp_high = 43,
+ .temp_over = 48,
+ .main_safety_tmr_h = 4,
+ .temp_interval_chg = 20,
+ .temp_interval_nochg = 120,
+ .usb_safety_tmr_h = 4,
+ .bkup_bat_v = BUP_VCH_SEL_2P6V,
+ .bkup_bat_i = BUP_ICH_SEL_150UA,
+ .no_maintenance = false,
+ .capacity_scaling = false,
+ .adc_therm = ABx500_ADC_THERM_BATCTRL,
+ .chg_unknown_bat = false,
+ .enable_overshoot = false,
+ .fg_res = 100,
+ .cap_levels = &cap_levels,
+ .bat_type = bat_type_thermistor,
+ .n_btypes = ARRAY_SIZE(bat_type_thermistor),
+ .batt_id = 0,
+ .interval_charging = 5,
+ .interval_not_charging = 120,
+ .temp_hysteresis = 3,
+ .gnd_lift_resistance = 34,
+ .chg_output_curr = ab8500_charge_output_curr_map,
+ .n_chg_out_curr = ARRAY_SIZE(ab8500_charge_output_curr_map),
+ .maxi = &ab8500_maxi_params,
+ .chg_params = &chg,
+ .fg_params = &fg,
+ .chg_input_curr = ab8500_charge_input_curr_map,
+ .n_chg_in_curr = ARRAY_SIZE(ab8500_charge_input_curr_map),
+};
+
+int ab8500_bm_of_probe(struct device *dev,
+ struct device_node *np,
+ struct abx500_bm_data *bm)
+{
+ const struct batres_vs_temp *tmp_batres_tbl;
+ struct device_node *battery_node;
+ const char *btech;
+ int i;
+
+ /* get phandle to 'battery-info' node */
+ battery_node = of_parse_phandle(np, "battery", 0);
+ if (!battery_node) {
+ dev_err(dev, "battery node or reference missing\n");
+ return -EINVAL;
+ }
+
+ btech = of_get_property(battery_node, "stericsson,battery-type", NULL);
+ if (!btech) {
+ dev_warn(dev, "missing property battery-name/type\n");
+ of_node_put(battery_node);
+ return -EINVAL;
+ }
+
+ if (strncmp(btech, "LION", 4) == 0) {
+ bm->no_maintenance = true;
+ bm->chg_unknown_bat = true;
+ bm->bat_type[BATTERY_UNKNOWN].charge_full_design = 2600;
+ bm->bat_type[BATTERY_UNKNOWN].termination_vol = 4150;
+ bm->bat_type[BATTERY_UNKNOWN].recharge_cap = 95;
+ bm->bat_type[BATTERY_UNKNOWN].normal_cur_lvl = 520;
+ bm->bat_type[BATTERY_UNKNOWN].normal_vol_lvl = 4200;
+ }
+
+ if (of_property_read_bool(battery_node, "thermistor-on-batctrl")) {
+ if (strncmp(btech, "LION", 4) == 0)
+ tmp_batres_tbl = temp_to_batres_tbl_9100;
+ else
+ tmp_batres_tbl = temp_to_batres_tbl_thermistor;
+ } else {
+ bm->n_btypes = 4;
+ bm->bat_type = bat_type_ext_thermistor;
+ bm->adc_therm = ABx500_ADC_THERM_BATTEMP;
+ tmp_batres_tbl = temp_to_batres_tbl_ext_thermistor;
+ }
+
+ /* select the battery resolution table */
+ for (i = 0; i < bm->n_btypes; ++i)
+ bm->bat_type[i].batres_tbl = tmp_batres_tbl;
+
+ of_node_put(battery_node);
+
+ return 0;
+}
diff --git a/drivers/power/supply/ab8500_btemp.c b/drivers/power/supply/ab8500_btemp.c
new file mode 100644
index 000000000..5a1adceb6
--- /dev/null
+++ b/drivers/power/supply/ab8500_btemp.c
@@ -0,0 +1,1172 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) ST-Ericsson SA 2012
+ *
+ * Battery temperature driver for AB8500
+ *
+ * Author:
+ * Johan Palsson <johan.palsson@stericsson.com>
+ * Karl Komierowski <karl.komierowski@stericsson.com>
+ * Arun R Murthy <arun.murthy@stericsson.com>
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/platform_device.h>
+#include <linux/power_supply.h>
+#include <linux/completion.h>
+#include <linux/workqueue.h>
+#include <linux/jiffies.h>
+#include <linux/of.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/abx500.h>
+#include <linux/mfd/abx500/ab8500.h>
+#include <linux/mfd/abx500/ab8500-bm.h>
+#include <linux/iio/consumer.h>
+
+#define VTVOUT_V 1800
+
+#define BTEMP_THERMAL_LOW_LIMIT -10
+#define BTEMP_THERMAL_MED_LIMIT 0
+#define BTEMP_THERMAL_HIGH_LIMIT_52 52
+#define BTEMP_THERMAL_HIGH_LIMIT_57 57
+#define BTEMP_THERMAL_HIGH_LIMIT_62 62
+
+#define BTEMP_BATCTRL_CURR_SRC_7UA 7
+#define BTEMP_BATCTRL_CURR_SRC_20UA 20
+
+#define BTEMP_BATCTRL_CURR_SRC_16UA 16
+#define BTEMP_BATCTRL_CURR_SRC_18UA 18
+
+#define BTEMP_BATCTRL_CURR_SRC_60UA 60
+#define BTEMP_BATCTRL_CURR_SRC_120UA 120
+
+/**
+ * struct ab8500_btemp_interrupts - ab8500 interrupts
+ * @name: name of the interrupt
+ * @isr function pointer to the isr
+ */
+struct ab8500_btemp_interrupts {
+ char *name;
+ irqreturn_t (*isr)(int irq, void *data);
+};
+
+struct ab8500_btemp_events {
+ bool batt_rem;
+ bool btemp_high;
+ bool btemp_medhigh;
+ bool btemp_lowmed;
+ bool btemp_low;
+ bool ac_conn;
+ bool usb_conn;
+};
+
+struct ab8500_btemp_ranges {
+ int btemp_high_limit;
+ int btemp_med_limit;
+ int btemp_low_limit;
+};
+
+/**
+ * struct ab8500_btemp - ab8500 BTEMP device information
+ * @dev: Pointer to the structure device
+ * @node: List of AB8500 BTEMPs, hence prepared for reentrance
+ * @curr_source: What current source we use, in uA
+ * @bat_temp: Dispatched battery temperature in degree Celsius
+ * @prev_bat_temp Last measured battery temperature in degree Celsius
+ * @parent: Pointer to the struct ab8500
+ * @adc_btemp_ball: ADC channel for the battery ball temperature
+ * @adc_bat_ctrl: ADC channel for the battery control
+ * @fg: Pointer to the struct fg
+ * @bm: Platform specific battery management information
+ * @btemp_psy: Structure for BTEMP specific battery properties
+ * @events: Structure for information about events triggered
+ * @btemp_ranges: Battery temperature range structure
+ * @btemp_wq: Work queue for measuring the temperature periodically
+ * @btemp_periodic_work: Work for measuring the temperature periodically
+ * @initialized: True if battery id read.
+ */
+struct ab8500_btemp {
+ struct device *dev;
+ struct list_head node;
+ int curr_source;
+ int bat_temp;
+ int prev_bat_temp;
+ struct ab8500 *parent;
+ struct iio_channel *btemp_ball;
+ struct iio_channel *bat_ctrl;
+ struct ab8500_fg *fg;
+ struct abx500_bm_data *bm;
+ struct power_supply *btemp_psy;
+ struct ab8500_btemp_events events;
+ struct ab8500_btemp_ranges btemp_ranges;
+ struct workqueue_struct *btemp_wq;
+ struct delayed_work btemp_periodic_work;
+ bool initialized;
+};
+
+/* BTEMP power supply properties */
+static enum power_supply_property ab8500_btemp_props[] = {
+ POWER_SUPPLY_PROP_PRESENT,
+ POWER_SUPPLY_PROP_ONLINE,
+ POWER_SUPPLY_PROP_TECHNOLOGY,
+ POWER_SUPPLY_PROP_TEMP,
+};
+
+static LIST_HEAD(ab8500_btemp_list);
+
+/**
+ * ab8500_btemp_get() - returns a reference to the primary AB8500 BTEMP
+ * (i.e. the first BTEMP in the instance list)
+ */
+struct ab8500_btemp *ab8500_btemp_get(void)
+{
+ return list_first_entry(&ab8500_btemp_list, struct ab8500_btemp, node);
+}
+EXPORT_SYMBOL(ab8500_btemp_get);
+
+/**
+ * ab8500_btemp_batctrl_volt_to_res() - convert batctrl voltage to resistance
+ * @di: pointer to the ab8500_btemp structure
+ * @v_batctrl: measured batctrl voltage
+ * @inst_curr: measured instant current
+ *
+ * This function returns the battery resistance that is
+ * derived from the BATCTRL voltage.
+ * Returns value in Ohms.
+ */
+static int ab8500_btemp_batctrl_volt_to_res(struct ab8500_btemp *di,
+ int v_batctrl, int inst_curr)
+{
+ int rbs;
+
+ if (is_ab8500_1p1_or_earlier(di->parent)) {
+ /*
+ * For ABB cut1.0 and 1.1 BAT_CTRL is internally
+ * connected to 1.8V through a 450k resistor
+ */
+ return (450000 * (v_batctrl)) / (1800 - v_batctrl);
+ }
+
+ if (di->bm->adc_therm == ABx500_ADC_THERM_BATCTRL) {
+ /*
+ * If the battery has internal NTC, we use the current
+ * source to calculate the resistance.
+ */
+ rbs = (v_batctrl * 1000
+ - di->bm->gnd_lift_resistance * inst_curr)
+ / di->curr_source;
+ } else {
+ /*
+ * BAT_CTRL is internally
+ * connected to 1.8V through a 80k resistor
+ */
+ rbs = (80000 * (v_batctrl)) / (1800 - v_batctrl);
+ }
+
+ return rbs;
+}
+
+/**
+ * ab8500_btemp_read_batctrl_voltage() - measure batctrl voltage
+ * @di: pointer to the ab8500_btemp structure
+ *
+ * This function returns the voltage on BATCTRL. Returns value in mV.
+ */
+static int ab8500_btemp_read_batctrl_voltage(struct ab8500_btemp *di)
+{
+ int vbtemp, ret;
+ static int prev;
+
+ ret = iio_read_channel_processed(di->bat_ctrl, &vbtemp);
+ if (ret < 0) {
+ dev_err(di->dev,
+ "%s ADC conversion failed, using previous value",
+ __func__);
+ return prev;
+ }
+ prev = vbtemp;
+ return vbtemp;
+}
+
+/**
+ * ab8500_btemp_curr_source_enable() - enable/disable batctrl current source
+ * @di: pointer to the ab8500_btemp structure
+ * @enable: enable or disable the current source
+ *
+ * Enable or disable the current sources for the BatCtrl AD channel
+ */
+static int ab8500_btemp_curr_source_enable(struct ab8500_btemp *di,
+ bool enable)
+{
+ int curr;
+ int ret = 0;
+
+ /*
+ * BATCTRL current sources are included on AB8500 cut2.0
+ * and future versions
+ */
+ if (is_ab8500_1p1_or_earlier(di->parent))
+ return 0;
+
+ /* Only do this for batteries with internal NTC */
+ if (di->bm->adc_therm == ABx500_ADC_THERM_BATCTRL && enable) {
+
+ if (di->curr_source == BTEMP_BATCTRL_CURR_SRC_7UA)
+ curr = BAT_CTRL_7U_ENA;
+ else
+ curr = BAT_CTRL_20U_ENA;
+
+ dev_dbg(di->dev, "Set BATCTRL %duA\n", di->curr_source);
+
+ ret = abx500_mask_and_set_register_interruptible(di->dev,
+ AB8500_CHARGER, AB8500_BAT_CTRL_CURRENT_SOURCE,
+ FORCE_BAT_CTRL_CMP_HIGH, FORCE_BAT_CTRL_CMP_HIGH);
+ if (ret) {
+ dev_err(di->dev, "%s failed setting cmp_force\n",
+ __func__);
+ return ret;
+ }
+
+ /*
+ * We have to wait one 32kHz cycle before enabling
+ * the current source, since ForceBatCtrlCmpHigh needs
+ * to be written in a separate cycle
+ */
+ udelay(32);
+
+ ret = abx500_set_register_interruptible(di->dev,
+ AB8500_CHARGER, AB8500_BAT_CTRL_CURRENT_SOURCE,
+ FORCE_BAT_CTRL_CMP_HIGH | curr);
+ if (ret) {
+ dev_err(di->dev, "%s failed enabling current source\n",
+ __func__);
+ goto disable_curr_source;
+ }
+ } else if (di->bm->adc_therm == ABx500_ADC_THERM_BATCTRL && !enable) {
+ dev_dbg(di->dev, "Disable BATCTRL curr source\n");
+
+ /* Write 0 to the curr bits */
+ ret = abx500_mask_and_set_register_interruptible(
+ di->dev,
+ AB8500_CHARGER, AB8500_BAT_CTRL_CURRENT_SOURCE,
+ BAT_CTRL_7U_ENA | BAT_CTRL_20U_ENA,
+ ~(BAT_CTRL_7U_ENA | BAT_CTRL_20U_ENA));
+
+ if (ret) {
+ dev_err(di->dev, "%s failed disabling current source\n",
+ __func__);
+ goto disable_curr_source;
+ }
+
+ /* Enable Pull-Up and comparator */
+ ret = abx500_mask_and_set_register_interruptible(di->dev,
+ AB8500_CHARGER, AB8500_BAT_CTRL_CURRENT_SOURCE,
+ BAT_CTRL_PULL_UP_ENA | BAT_CTRL_CMP_ENA,
+ BAT_CTRL_PULL_UP_ENA | BAT_CTRL_CMP_ENA);
+ if (ret) {
+ dev_err(di->dev, "%s failed enabling PU and comp\n",
+ __func__);
+ goto enable_pu_comp;
+ }
+
+ /*
+ * We have to wait one 32kHz cycle before disabling
+ * ForceBatCtrlCmpHigh since this needs to be written
+ * in a separate cycle
+ */
+ udelay(32);
+
+ /* Disable 'force comparator' */
+ ret = abx500_mask_and_set_register_interruptible(di->dev,
+ AB8500_CHARGER, AB8500_BAT_CTRL_CURRENT_SOURCE,
+ FORCE_BAT_CTRL_CMP_HIGH, ~FORCE_BAT_CTRL_CMP_HIGH);
+ if (ret) {
+ dev_err(di->dev, "%s failed disabling force comp\n",
+ __func__);
+ goto disable_force_comp;
+ }
+ }
+ return ret;
+
+ /*
+ * We have to try unsetting FORCE_BAT_CTRL_CMP_HIGH one more time
+ * if we got an error above
+ */
+disable_curr_source:
+ /* Write 0 to the curr bits */
+ ret = abx500_mask_and_set_register_interruptible(di->dev,
+ AB8500_CHARGER, AB8500_BAT_CTRL_CURRENT_SOURCE,
+ BAT_CTRL_7U_ENA | BAT_CTRL_20U_ENA,
+ ~(BAT_CTRL_7U_ENA | BAT_CTRL_20U_ENA));
+
+ if (ret) {
+ dev_err(di->dev, "%s failed disabling current source\n",
+ __func__);
+ return ret;
+ }
+enable_pu_comp:
+ /* Enable Pull-Up and comparator */
+ ret = abx500_mask_and_set_register_interruptible(di->dev,
+ AB8500_CHARGER, AB8500_BAT_CTRL_CURRENT_SOURCE,
+ BAT_CTRL_PULL_UP_ENA | BAT_CTRL_CMP_ENA,
+ BAT_CTRL_PULL_UP_ENA | BAT_CTRL_CMP_ENA);
+ if (ret) {
+ dev_err(di->dev, "%s failed enabling PU and comp\n",
+ __func__);
+ return ret;
+ }
+
+disable_force_comp:
+ /*
+ * We have to wait one 32kHz cycle before disabling
+ * ForceBatCtrlCmpHigh since this needs to be written
+ * in a separate cycle
+ */
+ udelay(32);
+
+ /* Disable 'force comparator' */
+ ret = abx500_mask_and_set_register_interruptible(di->dev,
+ AB8500_CHARGER, AB8500_BAT_CTRL_CURRENT_SOURCE,
+ FORCE_BAT_CTRL_CMP_HIGH, ~FORCE_BAT_CTRL_CMP_HIGH);
+ if (ret) {
+ dev_err(di->dev, "%s failed disabling force comp\n",
+ __func__);
+ return ret;
+ }
+
+ return ret;
+}
+
+/**
+ * ab8500_btemp_get_batctrl_res() - get battery resistance
+ * @di: pointer to the ab8500_btemp structure
+ *
+ * This function returns the battery pack identification resistance.
+ * Returns value in Ohms.
+ */
+static int ab8500_btemp_get_batctrl_res(struct ab8500_btemp *di)
+{
+ int ret;
+ int batctrl = 0;
+ int res;
+ int inst_curr;
+ int i;
+
+ /*
+ * BATCTRL current sources are included on AB8500 cut2.0
+ * and future versions
+ */
+ ret = ab8500_btemp_curr_source_enable(di, true);
+ if (ret) {
+ dev_err(di->dev, "%s curr source enabled failed\n", __func__);
+ return ret;
+ }
+
+ if (!di->fg)
+ di->fg = ab8500_fg_get();
+ if (!di->fg) {
+ dev_err(di->dev, "No fg found\n");
+ return -EINVAL;
+ }
+
+ ret = ab8500_fg_inst_curr_start(di->fg);
+
+ if (ret) {
+ dev_err(di->dev, "Failed to start current measurement\n");
+ return ret;
+ }
+
+ do {
+ msleep(20);
+ } while (!ab8500_fg_inst_curr_started(di->fg));
+
+ i = 0;
+
+ do {
+ batctrl += ab8500_btemp_read_batctrl_voltage(di);
+ i++;
+ msleep(20);
+ } while (!ab8500_fg_inst_curr_done(di->fg));
+ batctrl /= i;
+
+ ret = ab8500_fg_inst_curr_finalize(di->fg, &inst_curr);
+ if (ret) {
+ dev_err(di->dev, "Failed to finalize current measurement\n");
+ return ret;
+ }
+
+ res = ab8500_btemp_batctrl_volt_to_res(di, batctrl, inst_curr);
+
+ ret = ab8500_btemp_curr_source_enable(di, false);
+ if (ret) {
+ dev_err(di->dev, "%s curr source disable failed\n", __func__);
+ return ret;
+ }
+
+ dev_dbg(di->dev, "%s batctrl: %d res: %d inst_curr: %d samples: %d\n",
+ __func__, batctrl, res, inst_curr, i);
+
+ return res;
+}
+
+/**
+ * ab8500_btemp_res_to_temp() - resistance to temperature
+ * @di: pointer to the ab8500_btemp structure
+ * @tbl: pointer to the resiatance to temperature table
+ * @tbl_size: size of the resistance to temperature table
+ * @res: resistance to calculate the temperature from
+ *
+ * This function returns the battery temperature in degrees Celsius
+ * based on the NTC resistance.
+ */
+static int ab8500_btemp_res_to_temp(struct ab8500_btemp *di,
+ const struct abx500_res_to_temp *tbl, int tbl_size, int res)
+{
+ int i;
+ /*
+ * Calculate the formula for the straight line
+ * Simple interpolation if we are within
+ * the resistance table limits, extrapolate
+ * if resistance is outside the limits.
+ */
+ if (res > tbl[0].resist)
+ i = 0;
+ else if (res <= tbl[tbl_size - 1].resist)
+ i = tbl_size - 2;
+ else {
+ i = 0;
+ while (!(res <= tbl[i].resist &&
+ res > tbl[i + 1].resist))
+ i++;
+ }
+
+ return tbl[i].temp + ((tbl[i + 1].temp - tbl[i].temp) *
+ (res - tbl[i].resist)) / (tbl[i + 1].resist - tbl[i].resist);
+}
+
+/**
+ * ab8500_btemp_measure_temp() - measure battery temperature
+ * @di: pointer to the ab8500_btemp structure
+ *
+ * Returns battery temperature (on success) else the previous temperature
+ */
+static int ab8500_btemp_measure_temp(struct ab8500_btemp *di)
+{
+ int temp, ret;
+ static int prev;
+ int rbat, rntc, vntc;
+ u8 id;
+
+ id = di->bm->batt_id;
+
+ if (di->bm->adc_therm == ABx500_ADC_THERM_BATCTRL &&
+ id != BATTERY_UNKNOWN) {
+
+ rbat = ab8500_btemp_get_batctrl_res(di);
+ if (rbat < 0) {
+ dev_err(di->dev, "%s get batctrl res failed\n",
+ __func__);
+ /*
+ * Return out-of-range temperature so that
+ * charging is stopped
+ */
+ return BTEMP_THERMAL_LOW_LIMIT;
+ }
+
+ temp = ab8500_btemp_res_to_temp(di,
+ di->bm->bat_type[id].r_to_t_tbl,
+ di->bm->bat_type[id].n_temp_tbl_elements, rbat);
+ } else {
+ ret = iio_read_channel_processed(di->btemp_ball, &vntc);
+ if (ret < 0) {
+ dev_err(di->dev,
+ "%s ADC conversion failed,"
+ " using previous value\n", __func__);
+ return prev;
+ }
+ /*
+ * The PCB NTC is sourced from VTVOUT via a 230kOhm
+ * resistor.
+ */
+ rntc = 230000 * vntc / (VTVOUT_V - vntc);
+
+ temp = ab8500_btemp_res_to_temp(di,
+ di->bm->bat_type[id].r_to_t_tbl,
+ di->bm->bat_type[id].n_temp_tbl_elements, rntc);
+ prev = temp;
+ }
+ dev_dbg(di->dev, "Battery temperature is %d\n", temp);
+ return temp;
+}
+
+/**
+ * ab8500_btemp_id() - Identify the connected battery
+ * @di: pointer to the ab8500_btemp structure
+ *
+ * This function will try to identify the battery by reading the ID
+ * resistor. Some brands use a combined ID resistor with a NTC resistor to
+ * both be able to identify and to read the temperature of it.
+ */
+static int ab8500_btemp_id(struct ab8500_btemp *di)
+{
+ int res;
+ u8 i;
+
+ di->curr_source = BTEMP_BATCTRL_CURR_SRC_7UA;
+ di->bm->batt_id = BATTERY_UNKNOWN;
+
+ res = ab8500_btemp_get_batctrl_res(di);
+ if (res < 0) {
+ dev_err(di->dev, "%s get batctrl res failed\n", __func__);
+ return -ENXIO;
+ }
+
+ /* BATTERY_UNKNOWN is defined on position 0, skip it! */
+ for (i = BATTERY_UNKNOWN + 1; i < di->bm->n_btypes; i++) {
+ if ((res <= di->bm->bat_type[i].resis_high) &&
+ (res >= di->bm->bat_type[i].resis_low)) {
+ dev_dbg(di->dev, "Battery detected on %s"
+ " low %d < res %d < high: %d"
+ " index: %d\n",
+ di->bm->adc_therm == ABx500_ADC_THERM_BATCTRL ?
+ "BATCTRL" : "BATTEMP",
+ di->bm->bat_type[i].resis_low, res,
+ di->bm->bat_type[i].resis_high, i);
+
+ di->bm->batt_id = i;
+ break;
+ }
+ }
+
+ if (di->bm->batt_id == BATTERY_UNKNOWN) {
+ dev_warn(di->dev, "Battery identified as unknown"
+ ", resistance %d Ohm\n", res);
+ return -ENXIO;
+ }
+
+ /*
+ * We only have to change current source if the
+ * detected type is Type 1.
+ */
+ if (di->bm->adc_therm == ABx500_ADC_THERM_BATCTRL &&
+ di->bm->batt_id == 1) {
+ dev_dbg(di->dev, "Set BATCTRL current source to 20uA\n");
+ di->curr_source = BTEMP_BATCTRL_CURR_SRC_20UA;
+ }
+
+ return di->bm->batt_id;
+}
+
+/**
+ * ab8500_btemp_periodic_work() - Measuring the temperature periodically
+ * @work: pointer to the work_struct structure
+ *
+ * Work function for measuring the temperature periodically
+ */
+static void ab8500_btemp_periodic_work(struct work_struct *work)
+{
+ int interval;
+ int bat_temp;
+ struct ab8500_btemp *di = container_of(work,
+ struct ab8500_btemp, btemp_periodic_work.work);
+
+ if (!di->initialized) {
+ /* Identify the battery */
+ if (ab8500_btemp_id(di) < 0)
+ dev_warn(di->dev, "failed to identify the battery\n");
+ }
+
+ bat_temp = ab8500_btemp_measure_temp(di);
+ /*
+ * Filter battery temperature.
+ * Allow direct updates on temperature only if two samples result in
+ * same temperature. Else only allow 1 degree change from previous
+ * reported value in the direction of the new measurement.
+ */
+ if ((bat_temp == di->prev_bat_temp) || !di->initialized) {
+ if ((di->bat_temp != di->prev_bat_temp) || !di->initialized) {
+ di->initialized = true;
+ di->bat_temp = bat_temp;
+ power_supply_changed(di->btemp_psy);
+ }
+ } else if (bat_temp < di->prev_bat_temp) {
+ di->bat_temp--;
+ power_supply_changed(di->btemp_psy);
+ } else if (bat_temp > di->prev_bat_temp) {
+ di->bat_temp++;
+ power_supply_changed(di->btemp_psy);
+ }
+ di->prev_bat_temp = bat_temp;
+
+ if (di->events.ac_conn || di->events.usb_conn)
+ interval = di->bm->temp_interval_chg;
+ else
+ interval = di->bm->temp_interval_nochg;
+
+ /* Schedule a new measurement */
+ queue_delayed_work(di->btemp_wq,
+ &di->btemp_periodic_work,
+ round_jiffies(interval * HZ));
+}
+
+/**
+ * ab8500_btemp_batctrlindb_handler() - battery removal detected
+ * @irq: interrupt number
+ * @_di: void pointer that has to address of ab8500_btemp
+ *
+ * Returns IRQ status(IRQ_HANDLED)
+ */
+static irqreturn_t ab8500_btemp_batctrlindb_handler(int irq, void *_di)
+{
+ struct ab8500_btemp *di = _di;
+ dev_err(di->dev, "Battery removal detected!\n");
+
+ di->events.batt_rem = true;
+ power_supply_changed(di->btemp_psy);
+
+ return IRQ_HANDLED;
+}
+
+/**
+ * ab8500_btemp_templow_handler() - battery temp lower than 10 degrees
+ * @irq: interrupt number
+ * @_di: void pointer that has to address of ab8500_btemp
+ *
+ * Returns IRQ status(IRQ_HANDLED)
+ */
+static irqreturn_t ab8500_btemp_templow_handler(int irq, void *_di)
+{
+ struct ab8500_btemp *di = _di;
+
+ if (is_ab8500_3p3_or_earlier(di->parent)) {
+ dev_dbg(di->dev, "Ignore false btemp low irq"
+ " for ABB cut 1.0, 1.1, 2.0 and 3.3\n");
+ } else {
+ dev_crit(di->dev, "Battery temperature lower than -10deg c\n");
+
+ di->events.btemp_low = true;
+ di->events.btemp_high = false;
+ di->events.btemp_medhigh = false;
+ di->events.btemp_lowmed = false;
+ power_supply_changed(di->btemp_psy);
+ }
+
+ return IRQ_HANDLED;
+}
+
+/**
+ * ab8500_btemp_temphigh_handler() - battery temp higher than max temp
+ * @irq: interrupt number
+ * @_di: void pointer that has to address of ab8500_btemp
+ *
+ * Returns IRQ status(IRQ_HANDLED)
+ */
+static irqreturn_t ab8500_btemp_temphigh_handler(int irq, void *_di)
+{
+ struct ab8500_btemp *di = _di;
+
+ dev_crit(di->dev, "Battery temperature is higher than MAX temp\n");
+
+ di->events.btemp_high = true;
+ di->events.btemp_medhigh = false;
+ di->events.btemp_lowmed = false;
+ di->events.btemp_low = false;
+ power_supply_changed(di->btemp_psy);
+
+ return IRQ_HANDLED;
+}
+
+/**
+ * ab8500_btemp_lowmed_handler() - battery temp between low and medium
+ * @irq: interrupt number
+ * @_di: void pointer that has to address of ab8500_btemp
+ *
+ * Returns IRQ status(IRQ_HANDLED)
+ */
+static irqreturn_t ab8500_btemp_lowmed_handler(int irq, void *_di)
+{
+ struct ab8500_btemp *di = _di;
+
+ dev_dbg(di->dev, "Battery temperature is between low and medium\n");
+
+ di->events.btemp_lowmed = true;
+ di->events.btemp_medhigh = false;
+ di->events.btemp_high = false;
+ di->events.btemp_low = false;
+ power_supply_changed(di->btemp_psy);
+
+ return IRQ_HANDLED;
+}
+
+/**
+ * ab8500_btemp_medhigh_handler() - battery temp between medium and high
+ * @irq: interrupt number
+ * @_di: void pointer that has to address of ab8500_btemp
+ *
+ * Returns IRQ status(IRQ_HANDLED)
+ */
+static irqreturn_t ab8500_btemp_medhigh_handler(int irq, void *_di)
+{
+ struct ab8500_btemp *di = _di;
+
+ dev_dbg(di->dev, "Battery temperature is between medium and high\n");
+
+ di->events.btemp_medhigh = true;
+ di->events.btemp_lowmed = false;
+ di->events.btemp_high = false;
+ di->events.btemp_low = false;
+ power_supply_changed(di->btemp_psy);
+
+ return IRQ_HANDLED;
+}
+
+/**
+ * ab8500_btemp_periodic() - Periodic temperature measurements
+ * @di: pointer to the ab8500_btemp structure
+ * @enable: enable or disable periodic temperature measurements
+ *
+ * Starts of stops periodic temperature measurements. Periodic measurements
+ * should only be done when a charger is connected.
+ */
+static void ab8500_btemp_periodic(struct ab8500_btemp *di,
+ bool enable)
+{
+ dev_dbg(di->dev, "Enable periodic temperature measurements: %d\n",
+ enable);
+ /*
+ * Make sure a new measurement is done directly by cancelling
+ * any pending work
+ */
+ cancel_delayed_work_sync(&di->btemp_periodic_work);
+
+ if (enable)
+ queue_delayed_work(di->btemp_wq, &di->btemp_periodic_work, 0);
+}
+
+/**
+ * ab8500_btemp_get_temp() - get battery temperature
+ * @di: pointer to the ab8500_btemp structure
+ *
+ * Returns battery temperature
+ */
+int ab8500_btemp_get_temp(struct ab8500_btemp *di)
+{
+ int temp = 0;
+
+ /*
+ * The BTEMP events are not reliabe on AB8500 cut3.3
+ * and prior versions
+ */
+ if (is_ab8500_3p3_or_earlier(di->parent)) {
+ temp = di->bat_temp * 10;
+ } else {
+ if (di->events.btemp_low) {
+ if (temp > di->btemp_ranges.btemp_low_limit)
+ temp = di->btemp_ranges.btemp_low_limit * 10;
+ else
+ temp = di->bat_temp * 10;
+ } else if (di->events.btemp_high) {
+ if (temp < di->btemp_ranges.btemp_high_limit)
+ temp = di->btemp_ranges.btemp_high_limit * 10;
+ else
+ temp = di->bat_temp * 10;
+ } else if (di->events.btemp_lowmed) {
+ if (temp > di->btemp_ranges.btemp_med_limit)
+ temp = di->btemp_ranges.btemp_med_limit * 10;
+ else
+ temp = di->bat_temp * 10;
+ } else if (di->events.btemp_medhigh) {
+ if (temp < di->btemp_ranges.btemp_med_limit)
+ temp = di->btemp_ranges.btemp_med_limit * 10;
+ else
+ temp = di->bat_temp * 10;
+ } else
+ temp = di->bat_temp * 10;
+ }
+ return temp;
+}
+EXPORT_SYMBOL(ab8500_btemp_get_temp);
+
+/**
+ * ab8500_btemp_get_batctrl_temp() - get the temperature
+ * @btemp: pointer to the btemp structure
+ *
+ * Returns the batctrl temperature in millidegrees
+ */
+int ab8500_btemp_get_batctrl_temp(struct ab8500_btemp *btemp)
+{
+ return btemp->bat_temp * 1000;
+}
+EXPORT_SYMBOL(ab8500_btemp_get_batctrl_temp);
+
+/**
+ * ab8500_btemp_get_property() - get the btemp properties
+ * @psy: pointer to the power_supply structure
+ * @psp: pointer to the power_supply_property structure
+ * @val: pointer to the power_supply_propval union
+ *
+ * This function gets called when an application tries to get the btemp
+ * properties by reading the sysfs files.
+ * online: presence of the battery
+ * present: presence of the battery
+ * technology: battery technology
+ * temp: battery temperature
+ * Returns error code in case of failure else 0(on success)
+ */
+static int ab8500_btemp_get_property(struct power_supply *psy,
+ enum power_supply_property psp,
+ union power_supply_propval *val)
+{
+ struct ab8500_btemp *di = power_supply_get_drvdata(psy);
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_PRESENT:
+ case POWER_SUPPLY_PROP_ONLINE:
+ if (di->events.batt_rem)
+ val->intval = 0;
+ else
+ val->intval = 1;
+ break;
+ case POWER_SUPPLY_PROP_TECHNOLOGY:
+ val->intval = di->bm->bat_type[di->bm->batt_id].name;
+ break;
+ case POWER_SUPPLY_PROP_TEMP:
+ val->intval = ab8500_btemp_get_temp(di);
+ break;
+ default:
+ return -EINVAL;
+ }
+ return 0;
+}
+
+static int ab8500_btemp_get_ext_psy_data(struct device *dev, void *data)
+{
+ struct power_supply *psy;
+ struct power_supply *ext = dev_get_drvdata(dev);
+ const char **supplicants = (const char **)ext->supplied_to;
+ struct ab8500_btemp *di;
+ union power_supply_propval ret;
+ int j;
+
+ psy = (struct power_supply *)data;
+ di = power_supply_get_drvdata(psy);
+
+ /*
+ * For all psy where the name of your driver
+ * appears in any supplied_to
+ */
+ j = match_string(supplicants, ext->num_supplicants, psy->desc->name);
+ if (j < 0)
+ return 0;
+
+ /* Go through all properties for the psy */
+ for (j = 0; j < ext->desc->num_properties; j++) {
+ enum power_supply_property prop;
+ prop = ext->desc->properties[j];
+
+ if (power_supply_get_property(ext, prop, &ret))
+ continue;
+
+ switch (prop) {
+ case POWER_SUPPLY_PROP_PRESENT:
+ switch (ext->desc->type) {
+ case POWER_SUPPLY_TYPE_MAINS:
+ /* AC disconnected */
+ if (!ret.intval && di->events.ac_conn) {
+ di->events.ac_conn = false;
+ }
+ /* AC connected */
+ else if (ret.intval && !di->events.ac_conn) {
+ di->events.ac_conn = true;
+ if (!di->events.usb_conn)
+ ab8500_btemp_periodic(di, true);
+ }
+ break;
+ case POWER_SUPPLY_TYPE_USB:
+ /* USB disconnected */
+ if (!ret.intval && di->events.usb_conn) {
+ di->events.usb_conn = false;
+ }
+ /* USB connected */
+ else if (ret.intval && !di->events.usb_conn) {
+ di->events.usb_conn = true;
+ if (!di->events.ac_conn)
+ ab8500_btemp_periodic(di, true);
+ }
+ break;
+ default:
+ break;
+ }
+ break;
+ default:
+ break;
+ }
+ }
+ return 0;
+}
+
+/**
+ * ab8500_btemp_external_power_changed() - callback for power supply changes
+ * @psy: pointer to the structure power_supply
+ *
+ * This function is pointing to the function pointer external_power_changed
+ * of the structure power_supply.
+ * This function gets executed when there is a change in the external power
+ * supply to the btemp.
+ */
+static void ab8500_btemp_external_power_changed(struct power_supply *psy)
+{
+ class_for_each_device(power_supply_class, NULL, psy,
+ ab8500_btemp_get_ext_psy_data);
+}
+
+/* ab8500 btemp driver interrupts and their respective isr */
+static struct ab8500_btemp_interrupts ab8500_btemp_irq[] = {
+ {"BAT_CTRL_INDB", ab8500_btemp_batctrlindb_handler},
+ {"BTEMP_LOW", ab8500_btemp_templow_handler},
+ {"BTEMP_HIGH", ab8500_btemp_temphigh_handler},
+ {"BTEMP_LOW_MEDIUM", ab8500_btemp_lowmed_handler},
+ {"BTEMP_MEDIUM_HIGH", ab8500_btemp_medhigh_handler},
+};
+
+#if defined(CONFIG_PM)
+static int ab8500_btemp_resume(struct platform_device *pdev)
+{
+ struct ab8500_btemp *di = platform_get_drvdata(pdev);
+
+ ab8500_btemp_periodic(di, true);
+
+ return 0;
+}
+
+static int ab8500_btemp_suspend(struct platform_device *pdev,
+ pm_message_t state)
+{
+ struct ab8500_btemp *di = platform_get_drvdata(pdev);
+
+ ab8500_btemp_periodic(di, false);
+
+ return 0;
+}
+#else
+#define ab8500_btemp_suspend NULL
+#define ab8500_btemp_resume NULL
+#endif
+
+static int ab8500_btemp_remove(struct platform_device *pdev)
+{
+ struct ab8500_btemp *di = platform_get_drvdata(pdev);
+ int i, irq;
+
+ /* Disable interrupts */
+ for (i = 0; i < ARRAY_SIZE(ab8500_btemp_irq); i++) {
+ irq = platform_get_irq_byname(pdev, ab8500_btemp_irq[i].name);
+ free_irq(irq, di);
+ }
+
+ /* Delete the work queue */
+ destroy_workqueue(di->btemp_wq);
+
+ flush_scheduled_work();
+ power_supply_unregister(di->btemp_psy);
+
+ return 0;
+}
+
+static char *supply_interface[] = {
+ "ab8500_chargalg",
+ "ab8500_fg",
+};
+
+static const struct power_supply_desc ab8500_btemp_desc = {
+ .name = "ab8500_btemp",
+ .type = POWER_SUPPLY_TYPE_BATTERY,
+ .properties = ab8500_btemp_props,
+ .num_properties = ARRAY_SIZE(ab8500_btemp_props),
+ .get_property = ab8500_btemp_get_property,
+ .external_power_changed = ab8500_btemp_external_power_changed,
+};
+
+static int ab8500_btemp_probe(struct platform_device *pdev)
+{
+ struct device_node *np = pdev->dev.of_node;
+ struct abx500_bm_data *plat = pdev->dev.platform_data;
+ struct power_supply_config psy_cfg = {};
+ struct ab8500_btemp *di;
+ int irq, i, ret = 0;
+ u8 val;
+
+ di = devm_kzalloc(&pdev->dev, sizeof(*di), GFP_KERNEL);
+ if (!di) {
+ dev_err(&pdev->dev, "%s no mem for ab8500_btemp\n", __func__);
+ return -ENOMEM;
+ }
+
+ if (!plat) {
+ dev_err(&pdev->dev, "no battery management data supplied\n");
+ return -EINVAL;
+ }
+ di->bm = plat;
+
+ if (np) {
+ ret = ab8500_bm_of_probe(&pdev->dev, np, di->bm);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to get battery information\n");
+ return ret;
+ }
+ }
+
+ /* get parent data */
+ di->dev = &pdev->dev;
+ di->parent = dev_get_drvdata(pdev->dev.parent);
+
+ /* Get ADC channels */
+ di->btemp_ball = devm_iio_channel_get(&pdev->dev, "btemp_ball");
+ if (IS_ERR(di->btemp_ball)) {
+ if (PTR_ERR(di->btemp_ball) == -ENODEV)
+ return -EPROBE_DEFER;
+ dev_err(&pdev->dev, "failed to get BTEMP BALL ADC channel\n");
+ return PTR_ERR(di->btemp_ball);
+ }
+ di->bat_ctrl = devm_iio_channel_get(&pdev->dev, "bat_ctrl");
+ if (IS_ERR(di->bat_ctrl)) {
+ if (PTR_ERR(di->bat_ctrl) == -ENODEV)
+ return -EPROBE_DEFER;
+ dev_err(&pdev->dev, "failed to get BAT CTRL ADC channel\n");
+ return PTR_ERR(di->bat_ctrl);
+ }
+
+ di->initialized = false;
+
+ psy_cfg.supplied_to = supply_interface;
+ psy_cfg.num_supplicants = ARRAY_SIZE(supply_interface);
+ psy_cfg.drv_data = di;
+
+ /* Create a work queue for the btemp */
+ di->btemp_wq =
+ alloc_workqueue("ab8500_btemp_wq", WQ_MEM_RECLAIM, 0);
+ if (di->btemp_wq == NULL) {
+ dev_err(di->dev, "failed to create work queue\n");
+ return -ENOMEM;
+ }
+
+ /* Init work for measuring temperature periodically */
+ INIT_DEFERRABLE_WORK(&di->btemp_periodic_work,
+ ab8500_btemp_periodic_work);
+
+ /* Set BTEMP thermal limits. Low and Med are fixed */
+ di->btemp_ranges.btemp_low_limit = BTEMP_THERMAL_LOW_LIMIT;
+ di->btemp_ranges.btemp_med_limit = BTEMP_THERMAL_MED_LIMIT;
+
+ ret = abx500_get_register_interruptible(di->dev, AB8500_CHARGER,
+ AB8500_BTEMP_HIGH_TH, &val);
+ if (ret < 0) {
+ dev_err(di->dev, "%s ab8500 read failed\n", __func__);
+ goto free_btemp_wq;
+ }
+ switch (val) {
+ case BTEMP_HIGH_TH_57_0:
+ case BTEMP_HIGH_TH_57_1:
+ di->btemp_ranges.btemp_high_limit =
+ BTEMP_THERMAL_HIGH_LIMIT_57;
+ break;
+ case BTEMP_HIGH_TH_52:
+ di->btemp_ranges.btemp_high_limit =
+ BTEMP_THERMAL_HIGH_LIMIT_52;
+ break;
+ case BTEMP_HIGH_TH_62:
+ di->btemp_ranges.btemp_high_limit =
+ BTEMP_THERMAL_HIGH_LIMIT_62;
+ break;
+ }
+
+ /* Register BTEMP power supply class */
+ di->btemp_psy = power_supply_register(di->dev, &ab8500_btemp_desc,
+ &psy_cfg);
+ if (IS_ERR(di->btemp_psy)) {
+ dev_err(di->dev, "failed to register BTEMP psy\n");
+ ret = PTR_ERR(di->btemp_psy);
+ goto free_btemp_wq;
+ }
+
+ /* Register interrupts */
+ for (i = 0; i < ARRAY_SIZE(ab8500_btemp_irq); i++) {
+ irq = platform_get_irq_byname(pdev, ab8500_btemp_irq[i].name);
+ if (irq < 0) {
+ ret = irq;
+ goto free_irq;
+ }
+
+ ret = request_threaded_irq(irq, NULL, ab8500_btemp_irq[i].isr,
+ IRQF_SHARED | IRQF_NO_SUSPEND,
+ ab8500_btemp_irq[i].name, di);
+
+ if (ret) {
+ dev_err(di->dev, "failed to request %s IRQ %d: %d\n"
+ , ab8500_btemp_irq[i].name, irq, ret);
+ goto free_irq;
+ }
+ dev_dbg(di->dev, "Requested %s IRQ %d: %d\n",
+ ab8500_btemp_irq[i].name, irq, ret);
+ }
+
+ platform_set_drvdata(pdev, di);
+
+ /* Kick off periodic temperature measurements */
+ ab8500_btemp_periodic(di, true);
+ list_add_tail(&di->node, &ab8500_btemp_list);
+
+ return ret;
+
+free_irq:
+ /* We also have to free all successfully registered irqs */
+ for (i = i - 1; i >= 0; i--) {
+ irq = platform_get_irq_byname(pdev, ab8500_btemp_irq[i].name);
+ free_irq(irq, di);
+ }
+
+ power_supply_unregister(di->btemp_psy);
+free_btemp_wq:
+ destroy_workqueue(di->btemp_wq);
+ return ret;
+}
+
+static const struct of_device_id ab8500_btemp_match[] = {
+ { .compatible = "stericsson,ab8500-btemp", },
+ { },
+};
+MODULE_DEVICE_TABLE(of, ab8500_btemp_match);
+
+static struct platform_driver ab8500_btemp_driver = {
+ .probe = ab8500_btemp_probe,
+ .remove = ab8500_btemp_remove,
+ .suspend = ab8500_btemp_suspend,
+ .resume = ab8500_btemp_resume,
+ .driver = {
+ .name = "ab8500-btemp",
+ .of_match_table = ab8500_btemp_match,
+ },
+};
+
+static int __init ab8500_btemp_init(void)
+{
+ return platform_driver_register(&ab8500_btemp_driver);
+}
+
+static void __exit ab8500_btemp_exit(void)
+{
+ platform_driver_unregister(&ab8500_btemp_driver);
+}
+
+device_initcall(ab8500_btemp_init);
+module_exit(ab8500_btemp_exit);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Johan Palsson, Karl Komierowski, Arun R Murthy");
+MODULE_ALIAS("platform:ab8500-btemp");
+MODULE_DESCRIPTION("AB8500 battery temperature driver");
diff --git a/drivers/power/supply/ab8500_charger.c b/drivers/power/supply/ab8500_charger.c
new file mode 100644
index 000000000..3d627768a
--- /dev/null
+++ b/drivers/power/supply/ab8500_charger.c
@@ -0,0 +1,3711 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) ST-Ericsson SA 2012
+ *
+ * Charger driver for AB8500
+ *
+ * Author:
+ * Johan Palsson <johan.palsson@stericsson.com>
+ * Karl Komierowski <karl.komierowski@stericsson.com>
+ * Arun R Murthy <arun.murthy@stericsson.com>
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/notifier.h>
+#include <linux/slab.h>
+#include <linux/platform_device.h>
+#include <linux/power_supply.h>
+#include <linux/completion.h>
+#include <linux/regulator/consumer.h>
+#include <linux/err.h>
+#include <linux/workqueue.h>
+#include <linux/kobject.h>
+#include <linux/of.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/abx500/ab8500.h>
+#include <linux/mfd/abx500.h>
+#include <linux/mfd/abx500/ab8500-bm.h>
+#include <linux/mfd/abx500/ux500_chargalg.h>
+#include <linux/usb/otg.h>
+#include <linux/mutex.h>
+#include <linux/iio/consumer.h>
+
+/* Charger constants */
+#define NO_PW_CONN 0
+#define AC_PW_CONN 1
+#define USB_PW_CONN 2
+
+#define MAIN_WDOG_ENA 0x01
+#define MAIN_WDOG_KICK 0x02
+#define MAIN_WDOG_DIS 0x00
+#define CHARG_WD_KICK 0x01
+#define MAIN_CH_ENA 0x01
+#define MAIN_CH_NO_OVERSHOOT_ENA_N 0x02
+#define USB_CH_ENA 0x01
+#define USB_CHG_NO_OVERSHOOT_ENA_N 0x02
+#define MAIN_CH_DET 0x01
+#define MAIN_CH_CV_ON 0x04
+#define USB_CH_CV_ON 0x08
+#define VBUS_DET_DBNC100 0x02
+#define VBUS_DET_DBNC1 0x01
+#define OTP_ENABLE_WD 0x01
+#define DROP_COUNT_RESET 0x01
+#define USB_CH_DET 0x01
+
+#define MAIN_CH_INPUT_CURR_SHIFT 4
+#define VBUS_IN_CURR_LIM_SHIFT 4
+#define AUTO_VBUS_IN_CURR_LIM_SHIFT 4
+#define VBUS_IN_CURR_LIM_RETRY_SET_TIME 30 /* seconds */
+
+#define LED_INDICATOR_PWM_ENA 0x01
+#define LED_INDICATOR_PWM_DIS 0x00
+#define LED_IND_CUR_5MA 0x04
+#define LED_INDICATOR_PWM_DUTY_252_256 0xBF
+
+/* HW failure constants */
+#define MAIN_CH_TH_PROT 0x02
+#define VBUS_CH_NOK 0x08
+#define USB_CH_TH_PROT 0x02
+#define VBUS_OVV_TH 0x01
+#define MAIN_CH_NOK 0x01
+#define VBUS_DET 0x80
+
+#define MAIN_CH_STATUS2_MAINCHGDROP 0x80
+#define MAIN_CH_STATUS2_MAINCHARGERDETDBNC 0x40
+#define USB_CH_VBUSDROP 0x40
+#define USB_CH_VBUSDETDBNC 0x01
+
+/* UsbLineStatus register bit masks */
+#define AB8500_USB_LINK_STATUS 0x78
+#define AB8505_USB_LINK_STATUS 0xF8
+#define AB8500_STD_HOST_SUSP 0x18
+#define USB_LINK_STATUS_SHIFT 3
+
+/* Watchdog timeout constant */
+#define WD_TIMER 0x30 /* 4min */
+#define WD_KICK_INTERVAL (60 * HZ)
+
+/* Lowest charger voltage is 3.39V -> 0x4E */
+#define LOW_VOLT_REG 0x4E
+
+/* Step up/down delay in us */
+#define STEP_UDELAY 1000
+
+#define CHARGER_STATUS_POLL 10 /* in ms */
+
+#define CHG_WD_INTERVAL (60 * HZ)
+
+#define AB8500_SW_CONTROL_FALLBACK 0x03
+/* Wait for enumeration before charing in us */
+#define WAIT_ACA_RID_ENUMERATION (5 * 1000)
+/*External charger control*/
+#define AB8500_SYS_CHARGER_CONTROL_REG 0x52
+#define EXTERNAL_CHARGER_DISABLE_REG_VAL 0x03
+#define EXTERNAL_CHARGER_ENABLE_REG_VAL 0x07
+
+/* UsbLineStatus register - usb types */
+enum ab8500_charger_link_status {
+ USB_STAT_NOT_CONFIGURED,
+ USB_STAT_STD_HOST_NC,
+ USB_STAT_STD_HOST_C_NS,
+ USB_STAT_STD_HOST_C_S,
+ USB_STAT_HOST_CHG_NM,
+ USB_STAT_HOST_CHG_HS,
+ USB_STAT_HOST_CHG_HS_CHIRP,
+ USB_STAT_DEDICATED_CHG,
+ USB_STAT_ACA_RID_A,
+ USB_STAT_ACA_RID_B,
+ USB_STAT_ACA_RID_C_NM,
+ USB_STAT_ACA_RID_C_HS,
+ USB_STAT_ACA_RID_C_HS_CHIRP,
+ USB_STAT_HM_IDGND,
+ USB_STAT_RESERVED,
+ USB_STAT_NOT_VALID_LINK,
+ USB_STAT_PHY_EN,
+ USB_STAT_SUP_NO_IDGND_VBUS,
+ USB_STAT_SUP_IDGND_VBUS,
+ USB_STAT_CHARGER_LINE_1,
+ USB_STAT_CARKIT_1,
+ USB_STAT_CARKIT_2,
+ USB_STAT_ACA_DOCK_CHARGER,
+};
+
+enum ab8500_usb_state {
+ AB8500_BM_USB_STATE_RESET_HS, /* HighSpeed Reset */
+ AB8500_BM_USB_STATE_RESET_FS, /* FullSpeed/LowSpeed Reset */
+ AB8500_BM_USB_STATE_CONFIGURED,
+ AB8500_BM_USB_STATE_SUSPEND,
+ AB8500_BM_USB_STATE_RESUME,
+ AB8500_BM_USB_STATE_MAX,
+};
+
+/* VBUS input current limits supported in AB8500 in mA */
+#define USB_CH_IP_CUR_LVL_0P05 50
+#define USB_CH_IP_CUR_LVL_0P09 98
+#define USB_CH_IP_CUR_LVL_0P19 193
+#define USB_CH_IP_CUR_LVL_0P29 290
+#define USB_CH_IP_CUR_LVL_0P38 380
+#define USB_CH_IP_CUR_LVL_0P45 450
+#define USB_CH_IP_CUR_LVL_0P5 500
+#define USB_CH_IP_CUR_LVL_0P6 600
+#define USB_CH_IP_CUR_LVL_0P7 700
+#define USB_CH_IP_CUR_LVL_0P8 800
+#define USB_CH_IP_CUR_LVL_0P9 900
+#define USB_CH_IP_CUR_LVL_1P0 1000
+#define USB_CH_IP_CUR_LVL_1P1 1100
+#define USB_CH_IP_CUR_LVL_1P3 1300
+#define USB_CH_IP_CUR_LVL_1P4 1400
+#define USB_CH_IP_CUR_LVL_1P5 1500
+
+#define VBAT_TRESH_IP_CUR_RED 3800
+
+#define to_ab8500_charger_usb_device_info(x) container_of((x), \
+ struct ab8500_charger, usb_chg)
+#define to_ab8500_charger_ac_device_info(x) container_of((x), \
+ struct ab8500_charger, ac_chg)
+
+/**
+ * struct ab8500_charger_interrupts - ab8500 interupts
+ * @name: name of the interrupt
+ * @isr function pointer to the isr
+ */
+struct ab8500_charger_interrupts {
+ char *name;
+ irqreturn_t (*isr)(int irq, void *data);
+};
+
+struct ab8500_charger_info {
+ int charger_connected;
+ int charger_online;
+ int charger_voltage;
+ int cv_active;
+ bool wd_expired;
+ int charger_current;
+};
+
+struct ab8500_charger_event_flags {
+ bool mainextchnotok;
+ bool main_thermal_prot;
+ bool usb_thermal_prot;
+ bool vbus_ovv;
+ bool usbchargernotok;
+ bool chgwdexp;
+ bool vbus_collapse;
+ bool vbus_drop_end;
+};
+
+struct ab8500_charger_usb_state {
+ int usb_current;
+ int usb_current_tmp;
+ enum ab8500_usb_state state;
+ enum ab8500_usb_state state_tmp;
+ spinlock_t usb_lock;
+};
+
+struct ab8500_charger_max_usb_in_curr {
+ int usb_type_max;
+ int set_max;
+ int calculated_max;
+};
+
+/**
+ * struct ab8500_charger - ab8500 Charger device information
+ * @dev: Pointer to the structure device
+ * @vbus_detected: VBUS detected
+ * @vbus_detected_start:
+ * VBUS detected during startup
+ * @ac_conn: This will be true when the AC charger has been plugged
+ * @vddadc_en_ac: Indicate if VDD ADC supply is enabled because AC
+ * charger is enabled
+ * @vddadc_en_usb: Indicate if VDD ADC supply is enabled because USB
+ * charger is enabled
+ * @vbat Battery voltage
+ * @old_vbat Previously measured battery voltage
+ * @usb_device_is_unrecognised USB device is unrecognised by the hardware
+ * @autopower Indicate if we should have automatic pwron after pwrloss
+ * @autopower_cfg platform specific power config support for "pwron after pwrloss"
+ * @invalid_charger_detect_state State when forcing AB to use invalid charger
+ * @is_aca_rid: Incicate if accessory is ACA type
+ * @current_stepping_sessions:
+ * Counter for current stepping sessions
+ * @parent: Pointer to the struct ab8500
+ * @adc_main_charger_v ADC channel for main charger voltage
+ * @adc_main_charger_c ADC channel for main charger current
+ * @adc_vbus_v ADC channel for USB charger voltage
+ * @adc_usb_charger_c ADC channel for USB charger current
+ * @bm: Platform specific battery management information
+ * @flags: Structure for information about events triggered
+ * @usb_state: Structure for usb stack information
+ * @max_usb_in_curr: Max USB charger input current
+ * @ac_chg: AC charger power supply
+ * @usb_chg: USB charger power supply
+ * @ac: Structure that holds the AC charger properties
+ * @usb: Structure that holds the USB charger properties
+ * @regu: Pointer to the struct regulator
+ * @charger_wq: Work queue for the IRQs and checking HW state
+ * @usb_ipt_crnt_lock: Lock to protect VBUS input current setting from mutuals
+ * @pm_lock: Lock to prevent system to suspend
+ * @check_vbat_work Work for checking vbat threshold to adjust vbus current
+ * @check_hw_failure_work: Work for checking HW state
+ * @check_usbchgnotok_work: Work for checking USB charger not ok status
+ * @kick_wd_work: Work for kicking the charger watchdog in case
+ * of ABB rev 1.* due to the watchog logic bug
+ * @ac_charger_attached_work: Work for checking if AC charger is still
+ * connected
+ * @usb_charger_attached_work: Work for checking if USB charger is still
+ * connected
+ * @ac_work: Work for checking AC charger connection
+ * @detect_usb_type_work: Work for detecting the USB type connected
+ * @usb_link_status_work: Work for checking the new USB link status
+ * @usb_state_changed_work: Work for checking USB state
+ * @attach_work: Work for detecting USB type
+ * @vbus_drop_end_work: Work for detecting VBUS drop end
+ * @check_main_thermal_prot_work:
+ * Work for checking Main thermal status
+ * @check_usb_thermal_prot_work:
+ * Work for checking USB thermal status
+ * @charger_attached_mutex: For controlling the wakelock
+ */
+struct ab8500_charger {
+ struct device *dev;
+ bool vbus_detected;
+ bool vbus_detected_start;
+ bool ac_conn;
+ bool vddadc_en_ac;
+ bool vddadc_en_usb;
+ int vbat;
+ int old_vbat;
+ bool usb_device_is_unrecognised;
+ bool autopower;
+ bool autopower_cfg;
+ int invalid_charger_detect_state;
+ int is_aca_rid;
+ atomic_t current_stepping_sessions;
+ struct ab8500 *parent;
+ struct iio_channel *adc_main_charger_v;
+ struct iio_channel *adc_main_charger_c;
+ struct iio_channel *adc_vbus_v;
+ struct iio_channel *adc_usb_charger_c;
+ struct abx500_bm_data *bm;
+ struct ab8500_charger_event_flags flags;
+ struct ab8500_charger_usb_state usb_state;
+ struct ab8500_charger_max_usb_in_curr max_usb_in_curr;
+ struct ux500_charger ac_chg;
+ struct ux500_charger usb_chg;
+ struct ab8500_charger_info ac;
+ struct ab8500_charger_info usb;
+ struct regulator *regu;
+ struct workqueue_struct *charger_wq;
+ struct mutex usb_ipt_crnt_lock;
+ struct delayed_work check_vbat_work;
+ struct delayed_work check_hw_failure_work;
+ struct delayed_work check_usbchgnotok_work;
+ struct delayed_work kick_wd_work;
+ struct delayed_work usb_state_changed_work;
+ struct delayed_work attach_work;
+ struct delayed_work ac_charger_attached_work;
+ struct delayed_work usb_charger_attached_work;
+ struct delayed_work vbus_drop_end_work;
+ struct work_struct ac_work;
+ struct work_struct detect_usb_type_work;
+ struct work_struct usb_link_status_work;
+ struct work_struct check_main_thermal_prot_work;
+ struct work_struct check_usb_thermal_prot_work;
+ struct usb_phy *usb_phy;
+ struct notifier_block nb;
+ struct mutex charger_attached_mutex;
+};
+
+/* AC properties */
+static enum power_supply_property ab8500_charger_ac_props[] = {
+ POWER_SUPPLY_PROP_HEALTH,
+ POWER_SUPPLY_PROP_PRESENT,
+ POWER_SUPPLY_PROP_ONLINE,
+ POWER_SUPPLY_PROP_VOLTAGE_NOW,
+ POWER_SUPPLY_PROP_VOLTAGE_AVG,
+ POWER_SUPPLY_PROP_CURRENT_NOW,
+};
+
+/* USB properties */
+static enum power_supply_property ab8500_charger_usb_props[] = {
+ POWER_SUPPLY_PROP_HEALTH,
+ POWER_SUPPLY_PROP_CURRENT_AVG,
+ POWER_SUPPLY_PROP_PRESENT,
+ POWER_SUPPLY_PROP_ONLINE,
+ POWER_SUPPLY_PROP_VOLTAGE_NOW,
+ POWER_SUPPLY_PROP_VOLTAGE_AVG,
+ POWER_SUPPLY_PROP_CURRENT_NOW,
+};
+
+/*
+ * Function for enabling and disabling sw fallback mode
+ * should always be disabled when no charger is connected.
+ */
+static void ab8500_enable_disable_sw_fallback(struct ab8500_charger *di,
+ bool fallback)
+{
+ u8 val;
+ u8 reg;
+ u8 bank;
+ u8 bit;
+ int ret;
+
+ dev_dbg(di->dev, "SW Fallback: %d\n", fallback);
+
+ if (is_ab8500(di->parent)) {
+ bank = 0x15;
+ reg = 0x0;
+ bit = 3;
+ } else {
+ bank = AB8500_SYS_CTRL1_BLOCK;
+ reg = AB8500_SW_CONTROL_FALLBACK;
+ bit = 0;
+ }
+
+ /* read the register containing fallback bit */
+ ret = abx500_get_register_interruptible(di->dev, bank, reg, &val);
+ if (ret < 0) {
+ dev_err(di->dev, "%d read failed\n", __LINE__);
+ return;
+ }
+
+ if (is_ab8500(di->parent)) {
+ /* enable the OPT emulation registers */
+ ret = abx500_set_register_interruptible(di->dev, 0x11, 0x00, 0x2);
+ if (ret) {
+ dev_err(di->dev, "%d write failed\n", __LINE__);
+ goto disable_otp;
+ }
+ }
+
+ if (fallback)
+ val |= (1 << bit);
+ else
+ val &= ~(1 << bit);
+
+ /* write back the changed fallback bit value to register */
+ ret = abx500_set_register_interruptible(di->dev, bank, reg, val);
+ if (ret) {
+ dev_err(di->dev, "%d write failed\n", __LINE__);
+ }
+
+disable_otp:
+ if (is_ab8500(di->parent)) {
+ /* disable the set OTP registers again */
+ ret = abx500_set_register_interruptible(di->dev, 0x11, 0x00, 0x0);
+ if (ret) {
+ dev_err(di->dev, "%d write failed\n", __LINE__);
+ }
+ }
+}
+
+/**
+ * ab8500_power_supply_changed - a wrapper with local extensions for
+ * power_supply_changed
+ * @di: pointer to the ab8500_charger structure
+ * @psy: pointer to power_supply_that have changed.
+ *
+ */
+static void ab8500_power_supply_changed(struct ab8500_charger *di,
+ struct power_supply *psy)
+{
+ /*
+ * This happens if we get notifications or interrupts and
+ * the platform has been configured not to support one or
+ * other type of charging.
+ */
+ if (!psy)
+ return;
+
+ if (di->autopower_cfg) {
+ if (!di->usb.charger_connected &&
+ !di->ac.charger_connected &&
+ di->autopower) {
+ di->autopower = false;
+ ab8500_enable_disable_sw_fallback(di, false);
+ } else if (!di->autopower &&
+ (di->ac.charger_connected ||
+ di->usb.charger_connected)) {
+ di->autopower = true;
+ ab8500_enable_disable_sw_fallback(di, true);
+ }
+ }
+ power_supply_changed(psy);
+}
+
+static void ab8500_charger_set_usb_connected(struct ab8500_charger *di,
+ bool connected)
+{
+ if (connected != di->usb.charger_connected) {
+ dev_dbg(di->dev, "USB connected:%i\n", connected);
+ di->usb.charger_connected = connected;
+
+ if (!connected)
+ di->flags.vbus_drop_end = false;
+
+ /*
+ * Sometimes the platform is configured not to support
+ * USB charging and no psy has been created, but we still
+ * will get these notifications.
+ */
+ if (di->usb_chg.psy) {
+ sysfs_notify(&di->usb_chg.psy->dev.kobj, NULL,
+ "present");
+ }
+
+ if (connected) {
+ mutex_lock(&di->charger_attached_mutex);
+ mutex_unlock(&di->charger_attached_mutex);
+
+ if (is_ab8500(di->parent))
+ queue_delayed_work(di->charger_wq,
+ &di->usb_charger_attached_work,
+ HZ);
+ } else {
+ cancel_delayed_work_sync(&di->usb_charger_attached_work);
+ mutex_lock(&di->charger_attached_mutex);
+ mutex_unlock(&di->charger_attached_mutex);
+ }
+ }
+}
+
+/**
+ * ab8500_charger_get_ac_voltage() - get ac charger voltage
+ * @di: pointer to the ab8500_charger structure
+ *
+ * Returns ac charger voltage (on success)
+ */
+static int ab8500_charger_get_ac_voltage(struct ab8500_charger *di)
+{
+ int vch, ret;
+
+ /* Only measure voltage if the charger is connected */
+ if (di->ac.charger_connected) {
+ ret = iio_read_channel_processed(di->adc_main_charger_v, &vch);
+ if (ret < 0)
+ dev_err(di->dev, "%s ADC conv failed,\n", __func__);
+ } else {
+ vch = 0;
+ }
+ return vch;
+}
+
+/**
+ * ab8500_charger_ac_cv() - check if the main charger is in CV mode
+ * @di: pointer to the ab8500_charger structure
+ *
+ * Returns ac charger CV mode (on success) else error code
+ */
+static int ab8500_charger_ac_cv(struct ab8500_charger *di)
+{
+ u8 val;
+ int ret = 0;
+
+ /* Only check CV mode if the charger is online */
+ if (di->ac.charger_online) {
+ ret = abx500_get_register_interruptible(di->dev, AB8500_CHARGER,
+ AB8500_CH_STATUS1_REG, &val);
+ if (ret < 0) {
+ dev_err(di->dev, "%s ab8500 read failed\n", __func__);
+ return 0;
+ }
+
+ if (val & MAIN_CH_CV_ON)
+ ret = 1;
+ else
+ ret = 0;
+ }
+
+ return ret;
+}
+
+/**
+ * ab8500_charger_get_vbus_voltage() - get vbus voltage
+ * @di: pointer to the ab8500_charger structure
+ *
+ * This function returns the vbus voltage.
+ * Returns vbus voltage (on success)
+ */
+static int ab8500_charger_get_vbus_voltage(struct ab8500_charger *di)
+{
+ int vch, ret;
+
+ /* Only measure voltage if the charger is connected */
+ if (di->usb.charger_connected) {
+ ret = iio_read_channel_processed(di->adc_vbus_v, &vch);
+ if (ret < 0)
+ dev_err(di->dev, "%s ADC conv failed,\n", __func__);
+ } else {
+ vch = 0;
+ }
+ return vch;
+}
+
+/**
+ * ab8500_charger_get_usb_current() - get usb charger current
+ * @di: pointer to the ab8500_charger structure
+ *
+ * This function returns the usb charger current.
+ * Returns usb current (on success) and error code on failure
+ */
+static int ab8500_charger_get_usb_current(struct ab8500_charger *di)
+{
+ int ich, ret;
+
+ /* Only measure current if the charger is online */
+ if (di->usb.charger_online) {
+ ret = iio_read_channel_processed(di->adc_usb_charger_c, &ich);
+ if (ret < 0)
+ dev_err(di->dev, "%s ADC conv failed,\n", __func__);
+ } else {
+ ich = 0;
+ }
+ return ich;
+}
+
+/**
+ * ab8500_charger_get_ac_current() - get ac charger current
+ * @di: pointer to the ab8500_charger structure
+ *
+ * This function returns the ac charger current.
+ * Returns ac current (on success) and error code on failure.
+ */
+static int ab8500_charger_get_ac_current(struct ab8500_charger *di)
+{
+ int ich, ret;
+
+ /* Only measure current if the charger is online */
+ if (di->ac.charger_online) {
+ ret = iio_read_channel_processed(di->adc_main_charger_c, &ich);
+ if (ret < 0)
+ dev_err(di->dev, "%s ADC conv failed,\n", __func__);
+ } else {
+ ich = 0;
+ }
+ return ich;
+}
+
+/**
+ * ab8500_charger_usb_cv() - check if the usb charger is in CV mode
+ * @di: pointer to the ab8500_charger structure
+ *
+ * Returns ac charger CV mode (on success) else error code
+ */
+static int ab8500_charger_usb_cv(struct ab8500_charger *di)
+{
+ int ret;
+ u8 val;
+
+ /* Only check CV mode if the charger is online */
+ if (di->usb.charger_online) {
+ ret = abx500_get_register_interruptible(di->dev, AB8500_CHARGER,
+ AB8500_CH_USBCH_STAT1_REG, &val);
+ if (ret < 0) {
+ dev_err(di->dev, "%s ab8500 read failed\n", __func__);
+ return 0;
+ }
+
+ if (val & USB_CH_CV_ON)
+ ret = 1;
+ else
+ ret = 0;
+ } else {
+ ret = 0;
+ }
+
+ return ret;
+}
+
+/**
+ * ab8500_charger_detect_chargers() - Detect the connected chargers
+ * @di: pointer to the ab8500_charger structure
+ * @probe: if probe, don't delay and wait for HW
+ *
+ * Returns the type of charger connected.
+ * For USB it will not mean we can actually charge from it
+ * but that there is a USB cable connected that we have to
+ * identify. This is used during startup when we don't get
+ * interrupts of the charger detection
+ *
+ * Returns an integer value, that means,
+ * NO_PW_CONN no power supply is connected
+ * AC_PW_CONN if the AC power supply is connected
+ * USB_PW_CONN if the USB power supply is connected
+ * AC_PW_CONN + USB_PW_CONN if USB and AC power supplies are both connected
+ */
+static int ab8500_charger_detect_chargers(struct ab8500_charger *di, bool probe)
+{
+ int result = NO_PW_CONN;
+ int ret;
+ u8 val;
+
+ /* Check for AC charger */
+ ret = abx500_get_register_interruptible(di->dev, AB8500_CHARGER,
+ AB8500_CH_STATUS1_REG, &val);
+ if (ret < 0) {
+ dev_err(di->dev, "%s ab8500 read failed\n", __func__);
+ return ret;
+ }
+
+ if (val & MAIN_CH_DET)
+ result = AC_PW_CONN;
+
+ /* Check for USB charger */
+
+ if (!probe) {
+ /*
+ * AB8500 says VBUS_DET_DBNC1 & VBUS_DET_DBNC100
+ * when disconnecting ACA even though no
+ * charger was connected. Try waiting a little
+ * longer than the 100 ms of VBUS_DET_DBNC100...
+ */
+ msleep(110);
+ }
+ ret = abx500_get_register_interruptible(di->dev, AB8500_CHARGER,
+ AB8500_CH_USBCH_STAT1_REG, &val);
+ if (ret < 0) {
+ dev_err(di->dev, "%s ab8500 read failed\n", __func__);
+ return ret;
+ }
+ dev_dbg(di->dev,
+ "%s AB8500_CH_USBCH_STAT1_REG %x\n", __func__,
+ val);
+ if ((val & VBUS_DET_DBNC1) && (val & VBUS_DET_DBNC100))
+ result |= USB_PW_CONN;
+
+ return result;
+}
+
+/**
+ * ab8500_charger_max_usb_curr() - get the max curr for the USB type
+ * @di: pointer to the ab8500_charger structure
+ * @link_status: the identified USB type
+ *
+ * Get the maximum current that is allowed to be drawn from the host
+ * based on the USB type.
+ * Returns error code in case of failure else 0 on success
+ */
+static int ab8500_charger_max_usb_curr(struct ab8500_charger *di,
+ enum ab8500_charger_link_status link_status)
+{
+ int ret = 0;
+
+ di->usb_device_is_unrecognised = false;
+
+ /*
+ * Platform only supports USB 2.0.
+ * This means that charging current from USB source
+ * is maximum 500 mA. Every occurrence of USB_STAT_*_HOST_*
+ * should set USB_CH_IP_CUR_LVL_0P5.
+ */
+
+ switch (link_status) {
+ case USB_STAT_STD_HOST_NC:
+ case USB_STAT_STD_HOST_C_NS:
+ case USB_STAT_STD_HOST_C_S:
+ dev_dbg(di->dev, "USB Type - Standard host is "
+ "detected through USB driver\n");
+ di->max_usb_in_curr.usb_type_max = USB_CH_IP_CUR_LVL_0P5;
+ di->is_aca_rid = 0;
+ break;
+ case USB_STAT_HOST_CHG_HS_CHIRP:
+ di->max_usb_in_curr.usb_type_max = USB_CH_IP_CUR_LVL_0P5;
+ di->is_aca_rid = 0;
+ break;
+ case USB_STAT_HOST_CHG_HS:
+ di->max_usb_in_curr.usb_type_max = USB_CH_IP_CUR_LVL_0P5;
+ di->is_aca_rid = 0;
+ break;
+ case USB_STAT_ACA_RID_C_HS:
+ di->max_usb_in_curr.usb_type_max = USB_CH_IP_CUR_LVL_0P9;
+ di->is_aca_rid = 0;
+ break;
+ case USB_STAT_ACA_RID_A:
+ /*
+ * Dedicated charger level minus maximum current accessory
+ * can consume (900mA). Closest level is 500mA
+ */
+ dev_dbg(di->dev, "USB_STAT_ACA_RID_A detected\n");
+ di->max_usb_in_curr.usb_type_max = USB_CH_IP_CUR_LVL_0P5;
+ di->is_aca_rid = 1;
+ break;
+ case USB_STAT_ACA_RID_B:
+ /*
+ * Dedicated charger level minus 120mA (20mA for ACA and
+ * 100mA for potential accessory). Closest level is 1300mA
+ */
+ di->max_usb_in_curr.usb_type_max = USB_CH_IP_CUR_LVL_1P3;
+ dev_dbg(di->dev, "USB Type - 0x%02x MaxCurr: %d", link_status,
+ di->max_usb_in_curr.usb_type_max);
+ di->is_aca_rid = 1;
+ break;
+ case USB_STAT_HOST_CHG_NM:
+ di->max_usb_in_curr.usb_type_max = USB_CH_IP_CUR_LVL_0P5;
+ di->is_aca_rid = 0;
+ break;
+ case USB_STAT_DEDICATED_CHG:
+ di->max_usb_in_curr.usb_type_max = USB_CH_IP_CUR_LVL_1P5;
+ di->is_aca_rid = 0;
+ break;
+ case USB_STAT_ACA_RID_C_HS_CHIRP:
+ case USB_STAT_ACA_RID_C_NM:
+ di->max_usb_in_curr.usb_type_max = USB_CH_IP_CUR_LVL_1P5;
+ di->is_aca_rid = 1;
+ break;
+ case USB_STAT_NOT_CONFIGURED:
+ if (di->vbus_detected) {
+ di->usb_device_is_unrecognised = true;
+ dev_dbg(di->dev, "USB Type - Legacy charger.\n");
+ di->max_usb_in_curr.usb_type_max =
+ USB_CH_IP_CUR_LVL_1P5;
+ break;
+ }
+ fallthrough;
+ case USB_STAT_HM_IDGND:
+ dev_err(di->dev, "USB Type - Charging not allowed\n");
+ di->max_usb_in_curr.usb_type_max = USB_CH_IP_CUR_LVL_0P05;
+ ret = -ENXIO;
+ break;
+ case USB_STAT_RESERVED:
+ if (is_ab8500(di->parent)) {
+ di->flags.vbus_collapse = true;
+ dev_err(di->dev, "USB Type - USB_STAT_RESERVED "
+ "VBUS has collapsed\n");
+ ret = -ENXIO;
+ break;
+ } else {
+ dev_dbg(di->dev, "USB Type - Charging not allowed\n");
+ di->max_usb_in_curr.usb_type_max =
+ USB_CH_IP_CUR_LVL_0P05;
+ dev_dbg(di->dev, "USB Type - 0x%02x MaxCurr: %d",
+ link_status,
+ di->max_usb_in_curr.usb_type_max);
+ ret = -ENXIO;
+ break;
+ }
+ case USB_STAT_CARKIT_1:
+ case USB_STAT_CARKIT_2:
+ case USB_STAT_ACA_DOCK_CHARGER:
+ case USB_STAT_CHARGER_LINE_1:
+ di->max_usb_in_curr.usb_type_max = USB_CH_IP_CUR_LVL_0P5;
+ dev_dbg(di->dev, "USB Type - 0x%02x MaxCurr: %d", link_status,
+ di->max_usb_in_curr.usb_type_max);
+ break;
+ case USB_STAT_NOT_VALID_LINK:
+ dev_err(di->dev, "USB Type invalid - try charging anyway\n");
+ di->max_usb_in_curr.usb_type_max = USB_CH_IP_CUR_LVL_0P5;
+ break;
+
+ default:
+ dev_err(di->dev, "USB Type - Unknown\n");
+ di->max_usb_in_curr.usb_type_max = USB_CH_IP_CUR_LVL_0P05;
+ ret = -ENXIO;
+ break;
+ }
+
+ di->max_usb_in_curr.set_max = di->max_usb_in_curr.usb_type_max;
+ dev_dbg(di->dev, "USB Type - 0x%02x MaxCurr: %d",
+ link_status, di->max_usb_in_curr.set_max);
+
+ return ret;
+}
+
+/**
+ * ab8500_charger_read_usb_type() - read the type of usb connected
+ * @di: pointer to the ab8500_charger structure
+ *
+ * Detect the type of the plugged USB
+ * Returns error code in case of failure else 0 on success
+ */
+static int ab8500_charger_read_usb_type(struct ab8500_charger *di)
+{
+ int ret;
+ u8 val;
+
+ ret = abx500_get_register_interruptible(di->dev,
+ AB8500_INTERRUPT, AB8500_IT_SOURCE21_REG, &val);
+ if (ret < 0) {
+ dev_err(di->dev, "%s ab8500 read failed\n", __func__);
+ return ret;
+ }
+ if (is_ab8500(di->parent))
+ ret = abx500_get_register_interruptible(di->dev, AB8500_USB,
+ AB8500_USB_LINE_STAT_REG, &val);
+ else
+ ret = abx500_get_register_interruptible(di->dev,
+ AB8500_USB, AB8500_USB_LINK1_STAT_REG, &val);
+ if (ret < 0) {
+ dev_err(di->dev, "%s ab8500 read failed\n", __func__);
+ return ret;
+ }
+
+ /* get the USB type */
+ if (is_ab8500(di->parent))
+ val = (val & AB8500_USB_LINK_STATUS) >> USB_LINK_STATUS_SHIFT;
+ else
+ val = (val & AB8505_USB_LINK_STATUS) >> USB_LINK_STATUS_SHIFT;
+ ret = ab8500_charger_max_usb_curr(di,
+ (enum ab8500_charger_link_status) val);
+
+ return ret;
+}
+
+/**
+ * ab8500_charger_detect_usb_type() - get the type of usb connected
+ * @di: pointer to the ab8500_charger structure
+ *
+ * Detect the type of the plugged USB
+ * Returns error code in case of failure else 0 on success
+ */
+static int ab8500_charger_detect_usb_type(struct ab8500_charger *di)
+{
+ int i, ret;
+ u8 val;
+
+ /*
+ * On getting the VBUS rising edge detect interrupt there
+ * is a 250ms delay after which the register UsbLineStatus
+ * is filled with valid data.
+ */
+ for (i = 0; i < 10; i++) {
+ msleep(250);
+ ret = abx500_get_register_interruptible(di->dev,
+ AB8500_INTERRUPT, AB8500_IT_SOURCE21_REG,
+ &val);
+ dev_dbg(di->dev, "%s AB8500_IT_SOURCE21_REG %x\n",
+ __func__, val);
+ if (ret < 0) {
+ dev_err(di->dev, "%s ab8500 read failed\n", __func__);
+ return ret;
+ }
+
+ if (is_ab8500(di->parent))
+ ret = abx500_get_register_interruptible(di->dev,
+ AB8500_USB, AB8500_USB_LINE_STAT_REG, &val);
+ else
+ ret = abx500_get_register_interruptible(di->dev,
+ AB8500_USB, AB8500_USB_LINK1_STAT_REG, &val);
+ if (ret < 0) {
+ dev_err(di->dev, "%s ab8500 read failed\n", __func__);
+ return ret;
+ }
+ dev_dbg(di->dev, "%s AB8500_USB_LINE_STAT_REG %x\n", __func__,
+ val);
+ /*
+ * Until the IT source register is read the UsbLineStatus
+ * register is not updated, hence doing the same
+ * Revisit this:
+ */
+
+ /* get the USB type */
+ if (is_ab8500(di->parent))
+ val = (val & AB8500_USB_LINK_STATUS) >>
+ USB_LINK_STATUS_SHIFT;
+ else
+ val = (val & AB8505_USB_LINK_STATUS) >>
+ USB_LINK_STATUS_SHIFT;
+ if (val)
+ break;
+ }
+ ret = ab8500_charger_max_usb_curr(di,
+ (enum ab8500_charger_link_status) val);
+
+ return ret;
+}
+
+/*
+ * This array maps the raw hex value to charger voltage used by the AB8500
+ * Values taken from the UM0836
+ */
+static int ab8500_charger_voltage_map[] = {
+ 3500 ,
+ 3525 ,
+ 3550 ,
+ 3575 ,
+ 3600 ,
+ 3625 ,
+ 3650 ,
+ 3675 ,
+ 3700 ,
+ 3725 ,
+ 3750 ,
+ 3775 ,
+ 3800 ,
+ 3825 ,
+ 3850 ,
+ 3875 ,
+ 3900 ,
+ 3925 ,
+ 3950 ,
+ 3975 ,
+ 4000 ,
+ 4025 ,
+ 4050 ,
+ 4060 ,
+ 4070 ,
+ 4080 ,
+ 4090 ,
+ 4100 ,
+ 4110 ,
+ 4120 ,
+ 4130 ,
+ 4140 ,
+ 4150 ,
+ 4160 ,
+ 4170 ,
+ 4180 ,
+ 4190 ,
+ 4200 ,
+ 4210 ,
+ 4220 ,
+ 4230 ,
+ 4240 ,
+ 4250 ,
+ 4260 ,
+ 4270 ,
+ 4280 ,
+ 4290 ,
+ 4300 ,
+ 4310 ,
+ 4320 ,
+ 4330 ,
+ 4340 ,
+ 4350 ,
+ 4360 ,
+ 4370 ,
+ 4380 ,
+ 4390 ,
+ 4400 ,
+ 4410 ,
+ 4420 ,
+ 4430 ,
+ 4440 ,
+ 4450 ,
+ 4460 ,
+ 4470 ,
+ 4480 ,
+ 4490 ,
+ 4500 ,
+ 4510 ,
+ 4520 ,
+ 4530 ,
+ 4540 ,
+ 4550 ,
+ 4560 ,
+ 4570 ,
+ 4580 ,
+ 4590 ,
+ 4600 ,
+};
+
+static int ab8500_voltage_to_regval(int voltage)
+{
+ int i;
+
+ /* Special case for voltage below 3.5V */
+ if (voltage < ab8500_charger_voltage_map[0])
+ return LOW_VOLT_REG;
+
+ for (i = 1; i < ARRAY_SIZE(ab8500_charger_voltage_map); i++) {
+ if (voltage < ab8500_charger_voltage_map[i])
+ return i - 1;
+ }
+
+ /* If not last element, return error */
+ i = ARRAY_SIZE(ab8500_charger_voltage_map) - 1;
+ if (voltage == ab8500_charger_voltage_map[i])
+ return i;
+ else
+ return -1;
+}
+
+static int ab8500_current_to_regval(struct ab8500_charger *di, int curr)
+{
+ int i;
+
+ if (curr < di->bm->chg_output_curr[0])
+ return 0;
+
+ for (i = 0; i < di->bm->n_chg_out_curr; i++) {
+ if (curr < di->bm->chg_output_curr[i])
+ return i - 1;
+ }
+
+ /* If not last element, return error */
+ i = di->bm->n_chg_out_curr - 1;
+ if (curr == di->bm->chg_output_curr[i])
+ return i;
+ else
+ return -1;
+}
+
+static int ab8500_vbus_in_curr_to_regval(struct ab8500_charger *di, int curr)
+{
+ int i;
+
+ if (curr < di->bm->chg_input_curr[0])
+ return 0;
+
+ for (i = 0; i < di->bm->n_chg_in_curr; i++) {
+ if (curr < di->bm->chg_input_curr[i])
+ return i - 1;
+ }
+
+ /* If not last element, return error */
+ i = di->bm->n_chg_in_curr - 1;
+ if (curr == di->bm->chg_input_curr[i])
+ return i;
+ else
+ return -1;
+}
+
+/**
+ * ab8500_charger_get_usb_cur() - get usb current
+ * @di: pointer to the ab8500_charger structre
+ *
+ * The usb stack provides the maximum current that can be drawn from
+ * the standard usb host. This will be in mA.
+ * This function converts current in mA to a value that can be written
+ * to the register. Returns -1 if charging is not allowed
+ */
+static int ab8500_charger_get_usb_cur(struct ab8500_charger *di)
+{
+ int ret = 0;
+ switch (di->usb_state.usb_current) {
+ case 100:
+ di->max_usb_in_curr.usb_type_max = USB_CH_IP_CUR_LVL_0P09;
+ break;
+ case 200:
+ di->max_usb_in_curr.usb_type_max = USB_CH_IP_CUR_LVL_0P19;
+ break;
+ case 300:
+ di->max_usb_in_curr.usb_type_max = USB_CH_IP_CUR_LVL_0P29;
+ break;
+ case 400:
+ di->max_usb_in_curr.usb_type_max = USB_CH_IP_CUR_LVL_0P38;
+ break;
+ case 500:
+ di->max_usb_in_curr.usb_type_max = USB_CH_IP_CUR_LVL_0P5;
+ break;
+ default:
+ di->max_usb_in_curr.usb_type_max = USB_CH_IP_CUR_LVL_0P05;
+ ret = -EPERM;
+ break;
+ }
+ di->max_usb_in_curr.set_max = di->max_usb_in_curr.usb_type_max;
+ return ret;
+}
+
+/**
+ * ab8500_charger_check_continue_stepping() - Check to allow stepping
+ * @di: pointer to the ab8500_charger structure
+ * @reg: select what charger register to check
+ *
+ * Check if current stepping should be allowed to continue.
+ * Checks if charger source has not collapsed. If it has, further stepping
+ * is not allowed.
+ */
+static bool ab8500_charger_check_continue_stepping(struct ab8500_charger *di,
+ int reg)
+{
+ if (reg == AB8500_USBCH_IPT_CRNTLVL_REG)
+ return !di->flags.vbus_drop_end;
+ else
+ return true;
+}
+
+/**
+ * ab8500_charger_set_current() - set charger current
+ * @di: pointer to the ab8500_charger structure
+ * @ich: charger current, in mA
+ * @reg: select what charger register to set
+ *
+ * Set charger current.
+ * There is no state machine in the AB to step up/down the charger
+ * current to avoid dips and spikes on MAIN, VBUS and VBAT when
+ * charging is started. Instead we need to implement
+ * this charger current step-up/down here.
+ * Returns error code in case of failure else 0(on success)
+ */
+static int ab8500_charger_set_current(struct ab8500_charger *di,
+ int ich, int reg)
+{
+ int ret = 0;
+ int curr_index, prev_curr_index, shift_value, i;
+ u8 reg_value;
+ u32 step_udelay;
+ bool no_stepping = false;
+
+ atomic_inc(&di->current_stepping_sessions);
+
+ ret = abx500_get_register_interruptible(di->dev, AB8500_CHARGER,
+ reg, &reg_value);
+ if (ret < 0) {
+ dev_err(di->dev, "%s read failed\n", __func__);
+ goto exit_set_current;
+ }
+
+ switch (reg) {
+ case AB8500_MCH_IPT_CURLVL_REG:
+ shift_value = MAIN_CH_INPUT_CURR_SHIFT;
+ prev_curr_index = (reg_value >> shift_value);
+ curr_index = ab8500_current_to_regval(di, ich);
+ step_udelay = STEP_UDELAY;
+ if (!di->ac.charger_connected)
+ no_stepping = true;
+ break;
+ case AB8500_USBCH_IPT_CRNTLVL_REG:
+ shift_value = VBUS_IN_CURR_LIM_SHIFT;
+ prev_curr_index = (reg_value >> shift_value);
+ curr_index = ab8500_vbus_in_curr_to_regval(di, ich);
+ step_udelay = STEP_UDELAY * 100;
+
+ if (!di->usb.charger_connected)
+ no_stepping = true;
+ break;
+ case AB8500_CH_OPT_CRNTLVL_REG:
+ shift_value = 0;
+ prev_curr_index = (reg_value >> shift_value);
+ curr_index = ab8500_current_to_regval(di, ich);
+ step_udelay = STEP_UDELAY;
+ if (curr_index && (curr_index - prev_curr_index) > 1)
+ step_udelay *= 100;
+
+ if (!di->usb.charger_connected && !di->ac.charger_connected)
+ no_stepping = true;
+
+ break;
+ default:
+ dev_err(di->dev, "%s current register not valid\n", __func__);
+ ret = -ENXIO;
+ goto exit_set_current;
+ }
+
+ if (curr_index < 0) {
+ dev_err(di->dev, "requested current limit out-of-range\n");
+ ret = -ENXIO;
+ goto exit_set_current;
+ }
+
+ /* only update current if it's been changed */
+ if (prev_curr_index == curr_index) {
+ dev_dbg(di->dev, "%s current not changed for reg: 0x%02x\n",
+ __func__, reg);
+ ret = 0;
+ goto exit_set_current;
+ }
+
+ dev_dbg(di->dev, "%s set charger current: %d mA for reg: 0x%02x\n",
+ __func__, ich, reg);
+
+ if (no_stepping) {
+ ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER,
+ reg, (u8)curr_index << shift_value);
+ if (ret)
+ dev_err(di->dev, "%s write failed\n", __func__);
+ } else if (prev_curr_index > curr_index) {
+ for (i = prev_curr_index - 1; i >= curr_index; i--) {
+ dev_dbg(di->dev, "curr change_1 to: %x for 0x%02x\n",
+ (u8) i << shift_value, reg);
+ ret = abx500_set_register_interruptible(di->dev,
+ AB8500_CHARGER, reg, (u8)i << shift_value);
+ if (ret) {
+ dev_err(di->dev, "%s write failed\n", __func__);
+ goto exit_set_current;
+ }
+ if (i != curr_index)
+ usleep_range(step_udelay, step_udelay * 2);
+ }
+ } else {
+ bool allow = true;
+ for (i = prev_curr_index + 1; i <= curr_index && allow; i++) {
+ dev_dbg(di->dev, "curr change_2 to: %x for 0x%02x\n",
+ (u8)i << shift_value, reg);
+ ret = abx500_set_register_interruptible(di->dev,
+ AB8500_CHARGER, reg, (u8)i << shift_value);
+ if (ret) {
+ dev_err(di->dev, "%s write failed\n", __func__);
+ goto exit_set_current;
+ }
+ if (i != curr_index)
+ usleep_range(step_udelay, step_udelay * 2);
+
+ allow = ab8500_charger_check_continue_stepping(di, reg);
+ }
+ }
+
+exit_set_current:
+ atomic_dec(&di->current_stepping_sessions);
+
+ return ret;
+}
+
+/**
+ * ab8500_charger_set_vbus_in_curr() - set VBUS input current limit
+ * @di: pointer to the ab8500_charger structure
+ * @ich_in: charger input current limit
+ *
+ * Sets the current that can be drawn from the USB host
+ * Returns error code in case of failure else 0(on success)
+ */
+static int ab8500_charger_set_vbus_in_curr(struct ab8500_charger *di,
+ int ich_in)
+{
+ int min_value;
+ int ret;
+
+ /* We should always use to lowest current limit */
+ min_value = min(di->bm->chg_params->usb_curr_max, ich_in);
+ if (di->max_usb_in_curr.set_max > 0)
+ min_value = min(di->max_usb_in_curr.set_max, min_value);
+
+ if (di->usb_state.usb_current >= 0)
+ min_value = min(di->usb_state.usb_current, min_value);
+
+ switch (min_value) {
+ case 100:
+ if (di->vbat < VBAT_TRESH_IP_CUR_RED)
+ min_value = USB_CH_IP_CUR_LVL_0P05;
+ break;
+ case 500:
+ if (di->vbat < VBAT_TRESH_IP_CUR_RED)
+ min_value = USB_CH_IP_CUR_LVL_0P45;
+ break;
+ default:
+ break;
+ }
+
+ dev_info(di->dev, "VBUS input current limit set to %d mA\n", min_value);
+
+ mutex_lock(&di->usb_ipt_crnt_lock);
+ ret = ab8500_charger_set_current(di, min_value,
+ AB8500_USBCH_IPT_CRNTLVL_REG);
+ mutex_unlock(&di->usb_ipt_crnt_lock);
+
+ return ret;
+}
+
+/**
+ * ab8500_charger_set_main_in_curr() - set main charger input current
+ * @di: pointer to the ab8500_charger structure
+ * @ich_in: input charger current, in mA
+ *
+ * Set main charger input current.
+ * Returns error code in case of failure else 0(on success)
+ */
+static int ab8500_charger_set_main_in_curr(struct ab8500_charger *di,
+ int ich_in)
+{
+ return ab8500_charger_set_current(di, ich_in,
+ AB8500_MCH_IPT_CURLVL_REG);
+}
+
+/**
+ * ab8500_charger_set_output_curr() - set charger output current
+ * @di: pointer to the ab8500_charger structure
+ * @ich_out: output charger current, in mA
+ *
+ * Set charger output current.
+ * Returns error code in case of failure else 0(on success)
+ */
+static int ab8500_charger_set_output_curr(struct ab8500_charger *di,
+ int ich_out)
+{
+ return ab8500_charger_set_current(di, ich_out,
+ AB8500_CH_OPT_CRNTLVL_REG);
+}
+
+/**
+ * ab8500_charger_led_en() - turn on/off chargign led
+ * @di: pointer to the ab8500_charger structure
+ * @on: flag to turn on/off the chargign led
+ *
+ * Power ON/OFF charging LED indication
+ * Returns error code in case of failure else 0(on success)
+ */
+static int ab8500_charger_led_en(struct ab8500_charger *di, int on)
+{
+ int ret;
+
+ if (on) {
+ /* Power ON charging LED indicator, set LED current to 5mA */
+ ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER,
+ AB8500_LED_INDICATOR_PWM_CTRL,
+ (LED_IND_CUR_5MA | LED_INDICATOR_PWM_ENA));
+ if (ret) {
+ dev_err(di->dev, "Power ON LED failed\n");
+ return ret;
+ }
+ /* LED indicator PWM duty cycle 252/256 */
+ ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER,
+ AB8500_LED_INDICATOR_PWM_DUTY,
+ LED_INDICATOR_PWM_DUTY_252_256);
+ if (ret) {
+ dev_err(di->dev, "Set LED PWM duty cycle failed\n");
+ return ret;
+ }
+ } else {
+ /* Power off charging LED indicator */
+ ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER,
+ AB8500_LED_INDICATOR_PWM_CTRL,
+ LED_INDICATOR_PWM_DIS);
+ if (ret) {
+ dev_err(di->dev, "Power-off LED failed\n");
+ return ret;
+ }
+ }
+
+ return ret;
+}
+
+/**
+ * ab8500_charger_ac_en() - enable or disable ac charging
+ * @di: pointer to the ab8500_charger structure
+ * @enable: enable/disable flag
+ * @vset: charging voltage
+ * @iset: charging current
+ *
+ * Enable/Disable AC/Mains charging and turns on/off the charging led
+ * respectively.
+ **/
+static int ab8500_charger_ac_en(struct ux500_charger *charger,
+ int enable, int vset, int iset)
+{
+ int ret;
+ int volt_index;
+ int curr_index;
+ int input_curr_index;
+ u8 overshoot = 0;
+
+ struct ab8500_charger *di = to_ab8500_charger_ac_device_info(charger);
+
+ if (enable) {
+ /* Check if AC is connected */
+ if (!di->ac.charger_connected) {
+ dev_err(di->dev, "AC charger not connected\n");
+ return -ENXIO;
+ }
+
+ /* Enable AC charging */
+ dev_dbg(di->dev, "Enable AC: %dmV %dmA\n", vset, iset);
+
+ /*
+ * Due to a bug in AB8500, BTEMP_HIGH/LOW interrupts
+ * will be triggered every time we enable the VDD ADC supply.
+ * This will turn off charging for a short while.
+ * It can be avoided by having the supply on when
+ * there is a charger enabled. Normally the VDD ADC supply
+ * is enabled every time a GPADC conversion is triggered.
+ * We will force it to be enabled from this driver to have
+ * the GPADC module independent of the AB8500 chargers
+ */
+ if (!di->vddadc_en_ac) {
+ ret = regulator_enable(di->regu);
+ if (ret)
+ dev_warn(di->dev,
+ "Failed to enable regulator\n");
+ else
+ di->vddadc_en_ac = true;
+ }
+
+ /* Check if the requested voltage or current is valid */
+ volt_index = ab8500_voltage_to_regval(vset);
+ curr_index = ab8500_current_to_regval(di, iset);
+ input_curr_index = ab8500_current_to_regval(di,
+ di->bm->chg_params->ac_curr_max);
+ if (volt_index < 0 || curr_index < 0 || input_curr_index < 0) {
+ dev_err(di->dev,
+ "Charger voltage or current too high, "
+ "charging not started\n");
+ return -ENXIO;
+ }
+
+ /* ChVoltLevel: maximum battery charging voltage */
+ ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER,
+ AB8500_CH_VOLT_LVL_REG, (u8) volt_index);
+ if (ret) {
+ dev_err(di->dev, "%s write failed\n", __func__);
+ return ret;
+ }
+ /* MainChInputCurr: current that can be drawn from the charger*/
+ ret = ab8500_charger_set_main_in_curr(di,
+ di->bm->chg_params->ac_curr_max);
+ if (ret) {
+ dev_err(di->dev, "%s Failed to set MainChInputCurr\n",
+ __func__);
+ return ret;
+ }
+ /* ChOutputCurentLevel: protected output current */
+ ret = ab8500_charger_set_output_curr(di, iset);
+ if (ret) {
+ dev_err(di->dev, "%s "
+ "Failed to set ChOutputCurentLevel\n",
+ __func__);
+ return ret;
+ }
+
+ /* Check if VBAT overshoot control should be enabled */
+ if (!di->bm->enable_overshoot)
+ overshoot = MAIN_CH_NO_OVERSHOOT_ENA_N;
+
+ /* Enable Main Charger */
+ ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER,
+ AB8500_MCH_CTRL1, MAIN_CH_ENA | overshoot);
+ if (ret) {
+ dev_err(di->dev, "%s write failed\n", __func__);
+ return ret;
+ }
+
+ /* Power on charging LED indication */
+ ret = ab8500_charger_led_en(di, true);
+ if (ret < 0)
+ dev_err(di->dev, "failed to enable LED\n");
+
+ di->ac.charger_online = 1;
+ } else {
+ /* Disable AC charging */
+ if (is_ab8500_1p1_or_earlier(di->parent)) {
+ /*
+ * For ABB revision 1.0 and 1.1 there is a bug in the
+ * watchdog logic. That means we have to continuously
+ * kick the charger watchdog even when no charger is
+ * connected. This is only valid once the AC charger
+ * has been enabled. This is a bug that is not handled
+ * by the algorithm and the watchdog have to be kicked
+ * by the charger driver when the AC charger
+ * is disabled
+ */
+ if (di->ac_conn) {
+ queue_delayed_work(di->charger_wq,
+ &di->kick_wd_work,
+ round_jiffies(WD_KICK_INTERVAL));
+ }
+
+ /*
+ * We can't turn off charging completely
+ * due to a bug in AB8500 cut1.
+ * If we do, charging will not start again.
+ * That is why we set the lowest voltage
+ * and current possible
+ */
+ ret = abx500_set_register_interruptible(di->dev,
+ AB8500_CHARGER,
+ AB8500_CH_VOLT_LVL_REG, CH_VOL_LVL_3P5);
+ if (ret) {
+ dev_err(di->dev,
+ "%s write failed\n", __func__);
+ return ret;
+ }
+
+ ret = ab8500_charger_set_output_curr(di, 0);
+ if (ret) {
+ dev_err(di->dev, "%s "
+ "Failed to set ChOutputCurentLevel\n",
+ __func__);
+ return ret;
+ }
+ } else {
+ ret = abx500_set_register_interruptible(di->dev,
+ AB8500_CHARGER,
+ AB8500_MCH_CTRL1, 0);
+ if (ret) {
+ dev_err(di->dev,
+ "%s write failed\n", __func__);
+ return ret;
+ }
+ }
+
+ ret = ab8500_charger_led_en(di, false);
+ if (ret < 0)
+ dev_err(di->dev, "failed to disable LED\n");
+
+ di->ac.charger_online = 0;
+ di->ac.wd_expired = false;
+
+ /* Disable regulator if enabled */
+ if (di->vddadc_en_ac) {
+ regulator_disable(di->regu);
+ di->vddadc_en_ac = false;
+ }
+
+ dev_dbg(di->dev, "%s Disabled AC charging\n", __func__);
+ }
+ ab8500_power_supply_changed(di, di->ac_chg.psy);
+
+ return ret;
+}
+
+/**
+ * ab8500_charger_usb_en() - enable usb charging
+ * @di: pointer to the ab8500_charger structure
+ * @enable: enable/disable flag
+ * @vset: charging voltage
+ * @ich_out: charger output current
+ *
+ * Enable/Disable USB charging and turns on/off the charging led respectively.
+ * Returns error code in case of failure else 0(on success)
+ */
+static int ab8500_charger_usb_en(struct ux500_charger *charger,
+ int enable, int vset, int ich_out)
+{
+ int ret;
+ int volt_index;
+ int curr_index;
+ u8 overshoot = 0;
+
+ struct ab8500_charger *di = to_ab8500_charger_usb_device_info(charger);
+
+ if (enable) {
+ /* Check if USB is connected */
+ if (!di->usb.charger_connected) {
+ dev_err(di->dev, "USB charger not connected\n");
+ return -ENXIO;
+ }
+
+ /*
+ * Due to a bug in AB8500, BTEMP_HIGH/LOW interrupts
+ * will be triggered every time we enable the VDD ADC supply.
+ * This will turn off charging for a short while.
+ * It can be avoided by having the supply on when
+ * there is a charger enabled. Normally the VDD ADC supply
+ * is enabled every time a GPADC conversion is triggered.
+ * We will force it to be enabled from this driver to have
+ * the GPADC module independent of the AB8500 chargers
+ */
+ if (!di->vddadc_en_usb) {
+ ret = regulator_enable(di->regu);
+ if (ret)
+ dev_warn(di->dev,
+ "Failed to enable regulator\n");
+ else
+ di->vddadc_en_usb = true;
+ }
+
+ /* Enable USB charging */
+ dev_dbg(di->dev, "Enable USB: %dmV %dmA\n", vset, ich_out);
+
+ /* Check if the requested voltage or current is valid */
+ volt_index = ab8500_voltage_to_regval(vset);
+ curr_index = ab8500_current_to_regval(di, ich_out);
+ if (volt_index < 0 || curr_index < 0) {
+ dev_err(di->dev,
+ "Charger voltage or current too high, "
+ "charging not started\n");
+ return -ENXIO;
+ }
+
+ /*
+ * ChVoltLevel: max voltage up to which battery can be
+ * charged
+ */
+ ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER,
+ AB8500_CH_VOLT_LVL_REG, (u8) volt_index);
+ if (ret) {
+ dev_err(di->dev, "%s write failed\n", __func__);
+ return ret;
+ }
+ /* Check if VBAT overshoot control should be enabled */
+ if (!di->bm->enable_overshoot)
+ overshoot = USB_CHG_NO_OVERSHOOT_ENA_N;
+
+ /* Enable USB Charger */
+ dev_dbg(di->dev,
+ "Enabling USB with write to AB8500_USBCH_CTRL1_REG\n");
+ ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER,
+ AB8500_USBCH_CTRL1_REG, USB_CH_ENA | overshoot);
+ if (ret) {
+ dev_err(di->dev, "%s write failed\n", __func__);
+ return ret;
+ }
+
+ /* If success power on charging LED indication */
+ ret = ab8500_charger_led_en(di, true);
+ if (ret < 0)
+ dev_err(di->dev, "failed to enable LED\n");
+
+ di->usb.charger_online = 1;
+
+ /* USBChInputCurr: current that can be drawn from the usb */
+ ret = ab8500_charger_set_vbus_in_curr(di,
+ di->max_usb_in_curr.usb_type_max);
+ if (ret) {
+ dev_err(di->dev, "setting USBChInputCurr failed\n");
+ return ret;
+ }
+
+ /* ChOutputCurentLevel: protected output current */
+ ret = ab8500_charger_set_output_curr(di, ich_out);
+ if (ret) {
+ dev_err(di->dev, "%s "
+ "Failed to set ChOutputCurentLevel\n",
+ __func__);
+ return ret;
+ }
+
+ queue_delayed_work(di->charger_wq, &di->check_vbat_work, HZ);
+
+ } else {
+ /* Disable USB charging */
+ dev_dbg(di->dev, "%s Disabled USB charging\n", __func__);
+ ret = abx500_set_register_interruptible(di->dev,
+ AB8500_CHARGER,
+ AB8500_USBCH_CTRL1_REG, 0);
+ if (ret) {
+ dev_err(di->dev,
+ "%s write failed\n", __func__);
+ return ret;
+ }
+
+ ret = ab8500_charger_led_en(di, false);
+ if (ret < 0)
+ dev_err(di->dev, "failed to disable LED\n");
+ /* USBChInputCurr: current that can be drawn from the usb */
+ ret = ab8500_charger_set_vbus_in_curr(di, 0);
+ if (ret) {
+ dev_err(di->dev, "setting USBChInputCurr failed\n");
+ return ret;
+ }
+
+ /* ChOutputCurentLevel: protected output current */
+ ret = ab8500_charger_set_output_curr(di, 0);
+ if (ret) {
+ dev_err(di->dev, "%s "
+ "Failed to reset ChOutputCurentLevel\n",
+ __func__);
+ return ret;
+ }
+ di->usb.charger_online = 0;
+ di->usb.wd_expired = false;
+
+ /* Disable regulator if enabled */
+ if (di->vddadc_en_usb) {
+ regulator_disable(di->regu);
+ di->vddadc_en_usb = false;
+ }
+
+ dev_dbg(di->dev, "%s Disabled USB charging\n", __func__);
+
+ /* Cancel any pending Vbat check work */
+ cancel_delayed_work(&di->check_vbat_work);
+
+ }
+ ab8500_power_supply_changed(di, di->usb_chg.psy);
+
+ return ret;
+}
+
+static int ab8500_external_charger_prepare(struct notifier_block *charger_nb,
+ unsigned long event, void *data)
+{
+ int ret;
+ struct device *dev = data;
+ /*Toggle External charger control pin*/
+ ret = abx500_set_register_interruptible(dev, AB8500_SYS_CTRL1_BLOCK,
+ AB8500_SYS_CHARGER_CONTROL_REG,
+ EXTERNAL_CHARGER_DISABLE_REG_VAL);
+ if (ret < 0) {
+ dev_err(dev, "write reg failed %d\n", ret);
+ goto out;
+ }
+ ret = abx500_set_register_interruptible(dev, AB8500_SYS_CTRL1_BLOCK,
+ AB8500_SYS_CHARGER_CONTROL_REG,
+ EXTERNAL_CHARGER_ENABLE_REG_VAL);
+ if (ret < 0)
+ dev_err(dev, "Write reg failed %d\n", ret);
+
+out:
+ return ret;
+}
+
+/**
+ * ab8500_charger_usb_check_enable() - enable usb charging
+ * @charger: pointer to the ux500_charger structure
+ * @vset: charging voltage
+ * @iset: charger output current
+ *
+ * Check if the VBUS charger has been disconnected and reconnected without
+ * AB8500 rising an interrupt. Returns 0 on success.
+ */
+static int ab8500_charger_usb_check_enable(struct ux500_charger *charger,
+ int vset, int iset)
+{
+ u8 usbch_ctrl1 = 0;
+ int ret = 0;
+
+ struct ab8500_charger *di = to_ab8500_charger_usb_device_info(charger);
+
+ if (!di->usb.charger_connected)
+ return ret;
+
+ ret = abx500_get_register_interruptible(di->dev, AB8500_CHARGER,
+ AB8500_USBCH_CTRL1_REG, &usbch_ctrl1);
+ if (ret < 0) {
+ dev_err(di->dev, "ab8500 read failed %d\n", __LINE__);
+ return ret;
+ }
+ dev_dbg(di->dev, "USB charger ctrl: 0x%02x\n", usbch_ctrl1);
+
+ if (!(usbch_ctrl1 & USB_CH_ENA)) {
+ dev_info(di->dev, "Charging has been disabled abnormally and will be re-enabled\n");
+
+ ret = abx500_mask_and_set_register_interruptible(di->dev,
+ AB8500_CHARGER, AB8500_CHARGER_CTRL,
+ DROP_COUNT_RESET, DROP_COUNT_RESET);
+ if (ret < 0) {
+ dev_err(di->dev, "ab8500 write failed %d\n", __LINE__);
+ return ret;
+ }
+
+ ret = ab8500_charger_usb_en(&di->usb_chg, true, vset, iset);
+ if (ret < 0) {
+ dev_err(di->dev, "Failed to enable VBUS charger %d\n",
+ __LINE__);
+ return ret;
+ }
+ }
+ return ret;
+}
+
+/**
+ * ab8500_charger_ac_check_enable() - enable usb charging
+ * @charger: pointer to the ux500_charger structure
+ * @vset: charging voltage
+ * @iset: charger output current
+ *
+ * Check if the AC charger has been disconnected and reconnected without
+ * AB8500 rising an interrupt. Returns 0 on success.
+ */
+static int ab8500_charger_ac_check_enable(struct ux500_charger *charger,
+ int vset, int iset)
+{
+ u8 mainch_ctrl1 = 0;
+ int ret = 0;
+
+ struct ab8500_charger *di = to_ab8500_charger_ac_device_info(charger);
+
+ if (!di->ac.charger_connected)
+ return ret;
+
+ ret = abx500_get_register_interruptible(di->dev, AB8500_CHARGER,
+ AB8500_MCH_CTRL1, &mainch_ctrl1);
+ if (ret < 0) {
+ dev_err(di->dev, "ab8500 read failed %d\n", __LINE__);
+ return ret;
+ }
+ dev_dbg(di->dev, "AC charger ctrl: 0x%02x\n", mainch_ctrl1);
+
+ if (!(mainch_ctrl1 & MAIN_CH_ENA)) {
+ dev_info(di->dev, "Charging has been disabled abnormally and will be re-enabled\n");
+
+ ret = abx500_mask_and_set_register_interruptible(di->dev,
+ AB8500_CHARGER, AB8500_CHARGER_CTRL,
+ DROP_COUNT_RESET, DROP_COUNT_RESET);
+
+ if (ret < 0) {
+ dev_err(di->dev, "ab8500 write failed %d\n", __LINE__);
+ return ret;
+ }
+
+ ret = ab8500_charger_ac_en(&di->usb_chg, true, vset, iset);
+ if (ret < 0) {
+ dev_err(di->dev, "failed to enable AC charger %d\n",
+ __LINE__);
+ return ret;
+ }
+ }
+ return ret;
+}
+
+/**
+ * ab8500_charger_watchdog_kick() - kick charger watchdog
+ * @di: pointer to the ab8500_charger structure
+ *
+ * Kick charger watchdog
+ * Returns error code in case of failure else 0(on success)
+ */
+static int ab8500_charger_watchdog_kick(struct ux500_charger *charger)
+{
+ int ret;
+ struct ab8500_charger *di;
+
+ if (charger->psy->desc->type == POWER_SUPPLY_TYPE_MAINS)
+ di = to_ab8500_charger_ac_device_info(charger);
+ else if (charger->psy->desc->type == POWER_SUPPLY_TYPE_USB)
+ di = to_ab8500_charger_usb_device_info(charger);
+ else
+ return -ENXIO;
+
+ ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER,
+ AB8500_CHARG_WD_CTRL, CHARG_WD_KICK);
+ if (ret)
+ dev_err(di->dev, "Failed to kick WD!\n");
+
+ return ret;
+}
+
+/**
+ * ab8500_charger_update_charger_current() - update charger current
+ * @di: pointer to the ab8500_charger structure
+ *
+ * Update the charger output current for the specified charger
+ * Returns error code in case of failure else 0(on success)
+ */
+static int ab8500_charger_update_charger_current(struct ux500_charger *charger,
+ int ich_out)
+{
+ int ret;
+ struct ab8500_charger *di;
+
+ if (charger->psy->desc->type == POWER_SUPPLY_TYPE_MAINS)
+ di = to_ab8500_charger_ac_device_info(charger);
+ else if (charger->psy->desc->type == POWER_SUPPLY_TYPE_USB)
+ di = to_ab8500_charger_usb_device_info(charger);
+ else
+ return -ENXIO;
+
+ ret = ab8500_charger_set_output_curr(di, ich_out);
+ if (ret) {
+ dev_err(di->dev, "%s "
+ "Failed to set ChOutputCurentLevel\n",
+ __func__);
+ return ret;
+ }
+
+ /* Reset the main and usb drop input current measurement counter */
+ ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER,
+ AB8500_CHARGER_CTRL, DROP_COUNT_RESET);
+ if (ret) {
+ dev_err(di->dev, "%s write failed\n", __func__);
+ return ret;
+ }
+
+ return ret;
+}
+
+static int ab8500_charger_get_ext_psy_data(struct device *dev, void *data)
+{
+ struct power_supply *psy;
+ struct power_supply *ext = dev_get_drvdata(dev);
+ const char **supplicants = (const char **)ext->supplied_to;
+ struct ab8500_charger *di;
+ union power_supply_propval ret;
+ int j;
+ struct ux500_charger *usb_chg;
+
+ usb_chg = (struct ux500_charger *)data;
+ psy = usb_chg->psy;
+
+ di = to_ab8500_charger_usb_device_info(usb_chg);
+
+ /* For all psy where the driver name appears in any supplied_to */
+ j = match_string(supplicants, ext->num_supplicants, psy->desc->name);
+ if (j < 0)
+ return 0;
+
+ /* Go through all properties for the psy */
+ for (j = 0; j < ext->desc->num_properties; j++) {
+ enum power_supply_property prop;
+ prop = ext->desc->properties[j];
+
+ if (power_supply_get_property(ext, prop, &ret))
+ continue;
+
+ switch (prop) {
+ case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+ switch (ext->desc->type) {
+ case POWER_SUPPLY_TYPE_BATTERY:
+ di->vbat = ret.intval / 1000;
+ break;
+ default:
+ break;
+ }
+ break;
+ default:
+ break;
+ }
+ }
+ return 0;
+}
+
+/**
+ * ab8500_charger_check_vbat_work() - keep vbus current within spec
+ * @work pointer to the work_struct structure
+ *
+ * Due to a asic bug it is necessary to lower the input current to the vbus
+ * charger when charging with at some specific levels. This issue is only valid
+ * for below a certain battery voltage. This function makes sure that the
+ * the allowed current limit isn't exceeded.
+ */
+static void ab8500_charger_check_vbat_work(struct work_struct *work)
+{
+ int t = 10;
+ struct ab8500_charger *di = container_of(work,
+ struct ab8500_charger, check_vbat_work.work);
+
+ class_for_each_device(power_supply_class, NULL,
+ di->usb_chg.psy, ab8500_charger_get_ext_psy_data);
+
+ /* First run old_vbat is 0. */
+ if (di->old_vbat == 0)
+ di->old_vbat = di->vbat;
+
+ if (!((di->old_vbat <= VBAT_TRESH_IP_CUR_RED &&
+ di->vbat <= VBAT_TRESH_IP_CUR_RED) ||
+ (di->old_vbat > VBAT_TRESH_IP_CUR_RED &&
+ di->vbat > VBAT_TRESH_IP_CUR_RED))) {
+
+ dev_dbg(di->dev, "Vbat did cross threshold, curr: %d, new: %d,"
+ " old: %d\n", di->max_usb_in_curr.usb_type_max,
+ di->vbat, di->old_vbat);
+ ab8500_charger_set_vbus_in_curr(di,
+ di->max_usb_in_curr.usb_type_max);
+ power_supply_changed(di->usb_chg.psy);
+ }
+
+ di->old_vbat = di->vbat;
+
+ /*
+ * No need to check the battery voltage every second when not close to
+ * the threshold.
+ */
+ if (di->vbat < (VBAT_TRESH_IP_CUR_RED + 100) &&
+ (di->vbat > (VBAT_TRESH_IP_CUR_RED - 100)))
+ t = 1;
+
+ queue_delayed_work(di->charger_wq, &di->check_vbat_work, t * HZ);
+}
+
+/**
+ * ab8500_charger_check_hw_failure_work() - check main charger failure
+ * @work: pointer to the work_struct structure
+ *
+ * Work queue function for checking the main charger status
+ */
+static void ab8500_charger_check_hw_failure_work(struct work_struct *work)
+{
+ int ret;
+ u8 reg_value;
+
+ struct ab8500_charger *di = container_of(work,
+ struct ab8500_charger, check_hw_failure_work.work);
+
+ /* Check if the status bits for HW failure is still active */
+ if (di->flags.mainextchnotok) {
+ ret = abx500_get_register_interruptible(di->dev,
+ AB8500_CHARGER, AB8500_CH_STATUS2_REG, &reg_value);
+ if (ret < 0) {
+ dev_err(di->dev, "%s ab8500 read failed\n", __func__);
+ return;
+ }
+ if (!(reg_value & MAIN_CH_NOK)) {
+ di->flags.mainextchnotok = false;
+ ab8500_power_supply_changed(di, di->ac_chg.psy);
+ }
+ }
+ if (di->flags.vbus_ovv) {
+ ret = abx500_get_register_interruptible(di->dev,
+ AB8500_CHARGER, AB8500_CH_USBCH_STAT2_REG,
+ &reg_value);
+ if (ret < 0) {
+ dev_err(di->dev, "%s ab8500 read failed\n", __func__);
+ return;
+ }
+ if (!(reg_value & VBUS_OVV_TH)) {
+ di->flags.vbus_ovv = false;
+ ab8500_power_supply_changed(di, di->usb_chg.psy);
+ }
+ }
+ /* If we still have a failure, schedule a new check */
+ if (di->flags.mainextchnotok || di->flags.vbus_ovv) {
+ queue_delayed_work(di->charger_wq,
+ &di->check_hw_failure_work, round_jiffies(HZ));
+ }
+}
+
+/**
+ * ab8500_charger_kick_watchdog_work() - kick the watchdog
+ * @work: pointer to the work_struct structure
+ *
+ * Work queue function for kicking the charger watchdog.
+ *
+ * For ABB revision 1.0 and 1.1 there is a bug in the watchdog
+ * logic. That means we have to continuously kick the charger
+ * watchdog even when no charger is connected. This is only
+ * valid once the AC charger has been enabled. This is
+ * a bug that is not handled by the algorithm and the
+ * watchdog have to be kicked by the charger driver
+ * when the AC charger is disabled
+ */
+static void ab8500_charger_kick_watchdog_work(struct work_struct *work)
+{
+ int ret;
+
+ struct ab8500_charger *di = container_of(work,
+ struct ab8500_charger, kick_wd_work.work);
+
+ ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER,
+ AB8500_CHARG_WD_CTRL, CHARG_WD_KICK);
+ if (ret)
+ dev_err(di->dev, "Failed to kick WD!\n");
+
+ /* Schedule a new watchdog kick */
+ queue_delayed_work(di->charger_wq,
+ &di->kick_wd_work, round_jiffies(WD_KICK_INTERVAL));
+}
+
+/**
+ * ab8500_charger_ac_work() - work to get and set main charger status
+ * @work: pointer to the work_struct structure
+ *
+ * Work queue function for checking the main charger status
+ */
+static void ab8500_charger_ac_work(struct work_struct *work)
+{
+ int ret;
+
+ struct ab8500_charger *di = container_of(work,
+ struct ab8500_charger, ac_work);
+
+ /*
+ * Since we can't be sure that the events are received
+ * synchronously, we have the check if the main charger is
+ * connected by reading the status register
+ */
+ ret = ab8500_charger_detect_chargers(di, false);
+ if (ret < 0)
+ return;
+
+ if (ret & AC_PW_CONN) {
+ di->ac.charger_connected = 1;
+ di->ac_conn = true;
+ } else {
+ di->ac.charger_connected = 0;
+ }
+
+ ab8500_power_supply_changed(di, di->ac_chg.psy);
+ sysfs_notify(&di->ac_chg.psy->dev.kobj, NULL, "present");
+}
+
+static void ab8500_charger_usb_attached_work(struct work_struct *work)
+{
+ struct ab8500_charger *di = container_of(work,
+ struct ab8500_charger,
+ usb_charger_attached_work.work);
+ int usbch = (USB_CH_VBUSDROP | USB_CH_VBUSDETDBNC);
+ int ret, i;
+ u8 statval;
+
+ for (i = 0; i < 10; i++) {
+ ret = abx500_get_register_interruptible(di->dev,
+ AB8500_CHARGER,
+ AB8500_CH_USBCH_STAT1_REG,
+ &statval);
+ if (ret < 0) {
+ dev_err(di->dev, "ab8500 read failed %d\n", __LINE__);
+ goto reschedule;
+ }
+ if ((statval & usbch) != usbch)
+ goto reschedule;
+
+ msleep(CHARGER_STATUS_POLL);
+ }
+
+ ab8500_charger_usb_en(&di->usb_chg, 0, 0, 0);
+
+ mutex_lock(&di->charger_attached_mutex);
+ mutex_unlock(&di->charger_attached_mutex);
+
+ return;
+
+reschedule:
+ queue_delayed_work(di->charger_wq,
+ &di->usb_charger_attached_work,
+ HZ);
+}
+
+static void ab8500_charger_ac_attached_work(struct work_struct *work)
+{
+
+ struct ab8500_charger *di = container_of(work,
+ struct ab8500_charger,
+ ac_charger_attached_work.work);
+ int mainch = (MAIN_CH_STATUS2_MAINCHGDROP |
+ MAIN_CH_STATUS2_MAINCHARGERDETDBNC);
+ int ret, i;
+ u8 statval;
+
+ for (i = 0; i < 10; i++) {
+ ret = abx500_get_register_interruptible(di->dev,
+ AB8500_CHARGER,
+ AB8500_CH_STATUS2_REG,
+ &statval);
+ if (ret < 0) {
+ dev_err(di->dev, "ab8500 read failed %d\n", __LINE__);
+ goto reschedule;
+ }
+
+ if ((statval & mainch) != mainch)
+ goto reschedule;
+
+ msleep(CHARGER_STATUS_POLL);
+ }
+
+ ab8500_charger_ac_en(&di->ac_chg, 0, 0, 0);
+ queue_work(di->charger_wq, &di->ac_work);
+
+ mutex_lock(&di->charger_attached_mutex);
+ mutex_unlock(&di->charger_attached_mutex);
+
+ return;
+
+reschedule:
+ queue_delayed_work(di->charger_wq,
+ &di->ac_charger_attached_work,
+ HZ);
+}
+
+/**
+ * ab8500_charger_detect_usb_type_work() - work to detect USB type
+ * @work: Pointer to the work_struct structure
+ *
+ * Detect the type of USB plugged
+ */
+static void ab8500_charger_detect_usb_type_work(struct work_struct *work)
+{
+ int ret;
+
+ struct ab8500_charger *di = container_of(work,
+ struct ab8500_charger, detect_usb_type_work);
+
+ /*
+ * Since we can't be sure that the events are received
+ * synchronously, we have the check if is
+ * connected by reading the status register
+ */
+ ret = ab8500_charger_detect_chargers(di, false);
+ if (ret < 0)
+ return;
+
+ if (!(ret & USB_PW_CONN)) {
+ dev_dbg(di->dev, "%s di->vbus_detected = false\n", __func__);
+ di->vbus_detected = false;
+ ab8500_charger_set_usb_connected(di, false);
+ ab8500_power_supply_changed(di, di->usb_chg.psy);
+ } else {
+ dev_dbg(di->dev, "%s di->vbus_detected = true\n", __func__);
+ di->vbus_detected = true;
+
+ if (is_ab8500_1p1_or_earlier(di->parent)) {
+ ret = ab8500_charger_detect_usb_type(di);
+ if (!ret) {
+ ab8500_charger_set_usb_connected(di, true);
+ ab8500_power_supply_changed(di,
+ di->usb_chg.psy);
+ }
+ } else {
+ /*
+ * For ABB cut2.0 and onwards we have an IRQ,
+ * USB_LINK_STATUS that will be triggered when the USB
+ * link status changes. The exception is USB connected
+ * during startup. Then we don't get a
+ * USB_LINK_STATUS IRQ
+ */
+ if (di->vbus_detected_start) {
+ di->vbus_detected_start = false;
+ ret = ab8500_charger_detect_usb_type(di);
+ if (!ret) {
+ ab8500_charger_set_usb_connected(di,
+ true);
+ ab8500_power_supply_changed(di,
+ di->usb_chg.psy);
+ }
+ }
+ }
+ }
+}
+
+/**
+ * ab8500_charger_usb_link_attach_work() - work to detect USB type
+ * @work: pointer to the work_struct structure
+ *
+ * Detect the type of USB plugged
+ */
+static void ab8500_charger_usb_link_attach_work(struct work_struct *work)
+{
+ struct ab8500_charger *di =
+ container_of(work, struct ab8500_charger, attach_work.work);
+ int ret;
+
+ /* Update maximum input current if USB enumeration is not detected */
+ if (!di->usb.charger_online) {
+ ret = ab8500_charger_set_vbus_in_curr(di,
+ di->max_usb_in_curr.usb_type_max);
+ if (ret)
+ return;
+ }
+
+ ab8500_charger_set_usb_connected(di, true);
+ ab8500_power_supply_changed(di, di->usb_chg.psy);
+}
+
+/**
+ * ab8500_charger_usb_link_status_work() - work to detect USB type
+ * @work: pointer to the work_struct structure
+ *
+ * Detect the type of USB plugged
+ */
+static void ab8500_charger_usb_link_status_work(struct work_struct *work)
+{
+ int detected_chargers;
+ int ret;
+ u8 val;
+ u8 link_status;
+
+ struct ab8500_charger *di = container_of(work,
+ struct ab8500_charger, usb_link_status_work);
+
+ /*
+ * Since we can't be sure that the events are received
+ * synchronously, we have the check if is
+ * connected by reading the status register
+ */
+ detected_chargers = ab8500_charger_detect_chargers(di, false);
+ if (detected_chargers < 0)
+ return;
+
+ /*
+ * Some chargers that breaks the USB spec is
+ * identified as invalid by AB8500 and it refuse
+ * to start the charging process. but by jumping
+ * through a few hoops it can be forced to start.
+ */
+ if (is_ab8500(di->parent))
+ ret = abx500_get_register_interruptible(di->dev, AB8500_USB,
+ AB8500_USB_LINE_STAT_REG, &val);
+ else
+ ret = abx500_get_register_interruptible(di->dev, AB8500_USB,
+ AB8500_USB_LINK1_STAT_REG, &val);
+
+ if (ret >= 0)
+ dev_dbg(di->dev, "UsbLineStatus register = 0x%02x\n", val);
+ else
+ dev_dbg(di->dev, "Error reading USB link status\n");
+
+ if (is_ab8500(di->parent))
+ link_status = AB8500_USB_LINK_STATUS;
+ else
+ link_status = AB8505_USB_LINK_STATUS;
+
+ if (detected_chargers & USB_PW_CONN) {
+ if (((val & link_status) >> USB_LINK_STATUS_SHIFT) ==
+ USB_STAT_NOT_VALID_LINK &&
+ di->invalid_charger_detect_state == 0) {
+ dev_dbg(di->dev,
+ "Invalid charger detected, state= 0\n");
+ /*Enable charger*/
+ abx500_mask_and_set_register_interruptible(di->dev,
+ AB8500_CHARGER, AB8500_USBCH_CTRL1_REG,
+ USB_CH_ENA, USB_CH_ENA);
+ /*Enable charger detection*/
+ abx500_mask_and_set_register_interruptible(di->dev,
+ AB8500_USB, AB8500_USB_LINE_CTRL2_REG,
+ USB_CH_DET, USB_CH_DET);
+ di->invalid_charger_detect_state = 1;
+ /*exit and wait for new link status interrupt.*/
+ return;
+
+ }
+ if (di->invalid_charger_detect_state == 1) {
+ dev_dbg(di->dev,
+ "Invalid charger detected, state= 1\n");
+ /*Stop charger detection*/
+ abx500_mask_and_set_register_interruptible(di->dev,
+ AB8500_USB, AB8500_USB_LINE_CTRL2_REG,
+ USB_CH_DET, 0x00);
+ /*Check link status*/
+ if (is_ab8500(di->parent))
+ ret = abx500_get_register_interruptible(di->dev,
+ AB8500_USB, AB8500_USB_LINE_STAT_REG,
+ &val);
+ else
+ ret = abx500_get_register_interruptible(di->dev,
+ AB8500_USB, AB8500_USB_LINK1_STAT_REG,
+ &val);
+
+ dev_dbg(di->dev, "USB link status= 0x%02x\n",
+ (val & link_status) >> USB_LINK_STATUS_SHIFT);
+ di->invalid_charger_detect_state = 2;
+ }
+ } else {
+ di->invalid_charger_detect_state = 0;
+ }
+
+ if (!(detected_chargers & USB_PW_CONN)) {
+ di->vbus_detected = false;
+ ab8500_charger_set_usb_connected(di, false);
+ ab8500_power_supply_changed(di, di->usb_chg.psy);
+ return;
+ }
+
+ dev_dbg(di->dev,"%s di->vbus_detected = true\n",__func__);
+ di->vbus_detected = true;
+ ret = ab8500_charger_read_usb_type(di);
+ if (ret) {
+ if (ret == -ENXIO) {
+ /* No valid charger type detected */
+ ab8500_charger_set_usb_connected(di, false);
+ ab8500_power_supply_changed(di, di->usb_chg.psy);
+ }
+ return;
+ }
+
+ if (di->usb_device_is_unrecognised) {
+ dev_dbg(di->dev,
+ "Potential Legacy Charger device. "
+ "Delay work for %d msec for USB enum "
+ "to finish",
+ WAIT_ACA_RID_ENUMERATION);
+ queue_delayed_work(di->charger_wq,
+ &di->attach_work,
+ msecs_to_jiffies(WAIT_ACA_RID_ENUMERATION));
+ } else if (di->is_aca_rid == 1) {
+ /* Only wait once */
+ di->is_aca_rid++;
+ dev_dbg(di->dev,
+ "%s Wait %d msec for USB enum to finish",
+ __func__, WAIT_ACA_RID_ENUMERATION);
+ queue_delayed_work(di->charger_wq,
+ &di->attach_work,
+ msecs_to_jiffies(WAIT_ACA_RID_ENUMERATION));
+ } else {
+ queue_delayed_work(di->charger_wq,
+ &di->attach_work,
+ 0);
+ }
+}
+
+static void ab8500_charger_usb_state_changed_work(struct work_struct *work)
+{
+ int ret;
+ unsigned long flags;
+
+ struct ab8500_charger *di = container_of(work,
+ struct ab8500_charger, usb_state_changed_work.work);
+
+ if (!di->vbus_detected) {
+ dev_dbg(di->dev,
+ "%s !di->vbus_detected\n",
+ __func__);
+ return;
+ }
+
+ spin_lock_irqsave(&di->usb_state.usb_lock, flags);
+ di->usb_state.state = di->usb_state.state_tmp;
+ di->usb_state.usb_current = di->usb_state.usb_current_tmp;
+ spin_unlock_irqrestore(&di->usb_state.usb_lock, flags);
+
+ dev_dbg(di->dev, "%s USB state: 0x%02x mA: %d\n",
+ __func__, di->usb_state.state, di->usb_state.usb_current);
+
+ switch (di->usb_state.state) {
+ case AB8500_BM_USB_STATE_RESET_HS:
+ case AB8500_BM_USB_STATE_RESET_FS:
+ case AB8500_BM_USB_STATE_SUSPEND:
+ case AB8500_BM_USB_STATE_MAX:
+ ab8500_charger_set_usb_connected(di, false);
+ ab8500_power_supply_changed(di, di->usb_chg.psy);
+ break;
+
+ case AB8500_BM_USB_STATE_RESUME:
+ /*
+ * when suspend->resume there should be delay
+ * of 1sec for enabling charging
+ */
+ msleep(1000);
+ fallthrough;
+ case AB8500_BM_USB_STATE_CONFIGURED:
+ /*
+ * USB is configured, enable charging with the charging
+ * input current obtained from USB driver
+ */
+ if (!ab8500_charger_get_usb_cur(di)) {
+ /* Update maximum input current */
+ ret = ab8500_charger_set_vbus_in_curr(di,
+ di->max_usb_in_curr.usb_type_max);
+ if (ret)
+ return;
+
+ ab8500_charger_set_usb_connected(di, true);
+ ab8500_power_supply_changed(di, di->usb_chg.psy);
+ }
+ break;
+
+ default:
+ break;
+ }
+}
+
+/**
+ * ab8500_charger_check_usbchargernotok_work() - check USB chg not ok status
+ * @work: pointer to the work_struct structure
+ *
+ * Work queue function for checking the USB charger Not OK status
+ */
+static void ab8500_charger_check_usbchargernotok_work(struct work_struct *work)
+{
+ int ret;
+ u8 reg_value;
+ bool prev_status;
+
+ struct ab8500_charger *di = container_of(work,
+ struct ab8500_charger, check_usbchgnotok_work.work);
+
+ /* Check if the status bit for usbchargernotok is still active */
+ ret = abx500_get_register_interruptible(di->dev,
+ AB8500_CHARGER, AB8500_CH_USBCH_STAT2_REG, &reg_value);
+ if (ret < 0) {
+ dev_err(di->dev, "%s ab8500 read failed\n", __func__);
+ return;
+ }
+ prev_status = di->flags.usbchargernotok;
+
+ if (reg_value & VBUS_CH_NOK) {
+ di->flags.usbchargernotok = true;
+ /* Check again in 1sec */
+ queue_delayed_work(di->charger_wq,
+ &di->check_usbchgnotok_work, HZ);
+ } else {
+ di->flags.usbchargernotok = false;
+ di->flags.vbus_collapse = false;
+ }
+
+ if (prev_status != di->flags.usbchargernotok)
+ ab8500_power_supply_changed(di, di->usb_chg.psy);
+}
+
+/**
+ * ab8500_charger_check_main_thermal_prot_work() - check main thermal status
+ * @work: pointer to the work_struct structure
+ *
+ * Work queue function for checking the Main thermal prot status
+ */
+static void ab8500_charger_check_main_thermal_prot_work(
+ struct work_struct *work)
+{
+ int ret;
+ u8 reg_value;
+
+ struct ab8500_charger *di = container_of(work,
+ struct ab8500_charger, check_main_thermal_prot_work);
+
+ /* Check if the status bit for main_thermal_prot is still active */
+ ret = abx500_get_register_interruptible(di->dev,
+ AB8500_CHARGER, AB8500_CH_STATUS2_REG, &reg_value);
+ if (ret < 0) {
+ dev_err(di->dev, "%s ab8500 read failed\n", __func__);
+ return;
+ }
+ if (reg_value & MAIN_CH_TH_PROT)
+ di->flags.main_thermal_prot = true;
+ else
+ di->flags.main_thermal_prot = false;
+
+ ab8500_power_supply_changed(di, di->ac_chg.psy);
+}
+
+/**
+ * ab8500_charger_check_usb_thermal_prot_work() - check usb thermal status
+ * @work: pointer to the work_struct structure
+ *
+ * Work queue function for checking the USB thermal prot status
+ */
+static void ab8500_charger_check_usb_thermal_prot_work(
+ struct work_struct *work)
+{
+ int ret;
+ u8 reg_value;
+
+ struct ab8500_charger *di = container_of(work,
+ struct ab8500_charger, check_usb_thermal_prot_work);
+
+ /* Check if the status bit for usb_thermal_prot is still active */
+ ret = abx500_get_register_interruptible(di->dev,
+ AB8500_CHARGER, AB8500_CH_USBCH_STAT2_REG, &reg_value);
+ if (ret < 0) {
+ dev_err(di->dev, "%s ab8500 read failed\n", __func__);
+ return;
+ }
+ if (reg_value & USB_CH_TH_PROT)
+ di->flags.usb_thermal_prot = true;
+ else
+ di->flags.usb_thermal_prot = false;
+
+ ab8500_power_supply_changed(di, di->usb_chg.psy);
+}
+
+/**
+ * ab8500_charger_mainchunplugdet_handler() - main charger unplugged
+ * @irq: interrupt number
+ * @_di: pointer to the ab8500_charger structure
+ *
+ * Returns IRQ status(IRQ_HANDLED)
+ */
+static irqreturn_t ab8500_charger_mainchunplugdet_handler(int irq, void *_di)
+{
+ struct ab8500_charger *di = _di;
+
+ dev_dbg(di->dev, "Main charger unplugged\n");
+ queue_work(di->charger_wq, &di->ac_work);
+
+ cancel_delayed_work_sync(&di->ac_charger_attached_work);
+ mutex_lock(&di->charger_attached_mutex);
+ mutex_unlock(&di->charger_attached_mutex);
+
+ return IRQ_HANDLED;
+}
+
+/**
+ * ab8500_charger_mainchplugdet_handler() - main charger plugged
+ * @irq: interrupt number
+ * @_di: pointer to the ab8500_charger structure
+ *
+ * Returns IRQ status(IRQ_HANDLED)
+ */
+static irqreturn_t ab8500_charger_mainchplugdet_handler(int irq, void *_di)
+{
+ struct ab8500_charger *di = _di;
+
+ dev_dbg(di->dev, "Main charger plugged\n");
+ queue_work(di->charger_wq, &di->ac_work);
+
+ mutex_lock(&di->charger_attached_mutex);
+ mutex_unlock(&di->charger_attached_mutex);
+
+ if (is_ab8500(di->parent))
+ queue_delayed_work(di->charger_wq,
+ &di->ac_charger_attached_work,
+ HZ);
+ return IRQ_HANDLED;
+}
+
+/**
+ * ab8500_charger_mainextchnotok_handler() - main charger not ok
+ * @irq: interrupt number
+ * @_di: pointer to the ab8500_charger structure
+ *
+ * Returns IRQ status(IRQ_HANDLED)
+ */
+static irqreturn_t ab8500_charger_mainextchnotok_handler(int irq, void *_di)
+{
+ struct ab8500_charger *di = _di;
+
+ dev_dbg(di->dev, "Main charger not ok\n");
+ di->flags.mainextchnotok = true;
+ ab8500_power_supply_changed(di, di->ac_chg.psy);
+
+ /* Schedule a new HW failure check */
+ queue_delayed_work(di->charger_wq, &di->check_hw_failure_work, 0);
+
+ return IRQ_HANDLED;
+}
+
+/**
+ * ab8500_charger_mainchthprotr_handler() - Die temp is above main charger
+ * thermal protection threshold
+ * @irq: interrupt number
+ * @_di: pointer to the ab8500_charger structure
+ *
+ * Returns IRQ status(IRQ_HANDLED)
+ */
+static irqreturn_t ab8500_charger_mainchthprotr_handler(int irq, void *_di)
+{
+ struct ab8500_charger *di = _di;
+
+ dev_dbg(di->dev,
+ "Die temp above Main charger thermal protection threshold\n");
+ queue_work(di->charger_wq, &di->check_main_thermal_prot_work);
+
+ return IRQ_HANDLED;
+}
+
+/**
+ * ab8500_charger_mainchthprotf_handler() - Die temp is below main charger
+ * thermal protection threshold
+ * @irq: interrupt number
+ * @_di: pointer to the ab8500_charger structure
+ *
+ * Returns IRQ status(IRQ_HANDLED)
+ */
+static irqreturn_t ab8500_charger_mainchthprotf_handler(int irq, void *_di)
+{
+ struct ab8500_charger *di = _di;
+
+ dev_dbg(di->dev,
+ "Die temp ok for Main charger thermal protection threshold\n");
+ queue_work(di->charger_wq, &di->check_main_thermal_prot_work);
+
+ return IRQ_HANDLED;
+}
+
+static void ab8500_charger_vbus_drop_end_work(struct work_struct *work)
+{
+ struct ab8500_charger *di = container_of(work,
+ struct ab8500_charger, vbus_drop_end_work.work);
+ int ret, curr;
+ u8 reg_value;
+
+ di->flags.vbus_drop_end = false;
+
+ /* Reset the drop counter */
+ abx500_set_register_interruptible(di->dev,
+ AB8500_CHARGER, AB8500_CHARGER_CTRL, 0x01);
+
+ ret = abx500_get_register_interruptible(di->dev, AB8500_CHARGER,
+ AB8500_CH_USBCH_STAT2_REG, &reg_value);
+ if (ret < 0) {
+ dev_err(di->dev, "%s read failed\n", __func__);
+ return;
+ }
+
+ curr = di->bm->chg_input_curr[
+ reg_value >> AUTO_VBUS_IN_CURR_LIM_SHIFT];
+
+ if (di->max_usb_in_curr.calculated_max != curr) {
+ /* USB source is collapsing */
+ di->max_usb_in_curr.calculated_max = curr;
+ dev_dbg(di->dev,
+ "VBUS input current limiting to %d mA\n",
+ di->max_usb_in_curr.calculated_max);
+ } else {
+ /*
+ * USB source can not give more than this amount.
+ * Taking more will collapse the source.
+ */
+ di->max_usb_in_curr.set_max =
+ di->max_usb_in_curr.calculated_max;
+ dev_dbg(di->dev,
+ "VBUS input current limited to %d mA\n",
+ di->max_usb_in_curr.set_max);
+ }
+
+ if (di->usb.charger_connected)
+ ab8500_charger_set_vbus_in_curr(di,
+ di->max_usb_in_curr.usb_type_max);
+}
+
+/**
+ * ab8500_charger_vbusdetf_handler() - VBUS falling detected
+ * @irq: interrupt number
+ * @_di: pointer to the ab8500_charger structure
+ *
+ * Returns IRQ status(IRQ_HANDLED)
+ */
+static irqreturn_t ab8500_charger_vbusdetf_handler(int irq, void *_di)
+{
+ struct ab8500_charger *di = _di;
+
+ di->vbus_detected = false;
+ dev_dbg(di->dev, "VBUS falling detected\n");
+ queue_work(di->charger_wq, &di->detect_usb_type_work);
+
+ return IRQ_HANDLED;
+}
+
+/**
+ * ab8500_charger_vbusdetr_handler() - VBUS rising detected
+ * @irq: interrupt number
+ * @_di: pointer to the ab8500_charger structure
+ *
+ * Returns IRQ status(IRQ_HANDLED)
+ */
+static irqreturn_t ab8500_charger_vbusdetr_handler(int irq, void *_di)
+{
+ struct ab8500_charger *di = _di;
+
+ di->vbus_detected = true;
+ dev_dbg(di->dev, "VBUS rising detected\n");
+
+ queue_work(di->charger_wq, &di->detect_usb_type_work);
+
+ return IRQ_HANDLED;
+}
+
+/**
+ * ab8500_charger_usblinkstatus_handler() - USB link status has changed
+ * @irq: interrupt number
+ * @_di: pointer to the ab8500_charger structure
+ *
+ * Returns IRQ status(IRQ_HANDLED)
+ */
+static irqreturn_t ab8500_charger_usblinkstatus_handler(int irq, void *_di)
+{
+ struct ab8500_charger *di = _di;
+
+ dev_dbg(di->dev, "USB link status changed\n");
+
+ queue_work(di->charger_wq, &di->usb_link_status_work);
+
+ return IRQ_HANDLED;
+}
+
+/**
+ * ab8500_charger_usbchthprotr_handler() - Die temp is above usb charger
+ * thermal protection threshold
+ * @irq: interrupt number
+ * @_di: pointer to the ab8500_charger structure
+ *
+ * Returns IRQ status(IRQ_HANDLED)
+ */
+static irqreturn_t ab8500_charger_usbchthprotr_handler(int irq, void *_di)
+{
+ struct ab8500_charger *di = _di;
+
+ dev_dbg(di->dev,
+ "Die temp above USB charger thermal protection threshold\n");
+ queue_work(di->charger_wq, &di->check_usb_thermal_prot_work);
+
+ return IRQ_HANDLED;
+}
+
+/**
+ * ab8500_charger_usbchthprotf_handler() - Die temp is below usb charger
+ * thermal protection threshold
+ * @irq: interrupt number
+ * @_di: pointer to the ab8500_charger structure
+ *
+ * Returns IRQ status(IRQ_HANDLED)
+ */
+static irqreturn_t ab8500_charger_usbchthprotf_handler(int irq, void *_di)
+{
+ struct ab8500_charger *di = _di;
+
+ dev_dbg(di->dev,
+ "Die temp ok for USB charger thermal protection threshold\n");
+ queue_work(di->charger_wq, &di->check_usb_thermal_prot_work);
+
+ return IRQ_HANDLED;
+}
+
+/**
+ * ab8500_charger_usbchargernotokr_handler() - USB charger not ok detected
+ * @irq: interrupt number
+ * @_di: pointer to the ab8500_charger structure
+ *
+ * Returns IRQ status(IRQ_HANDLED)
+ */
+static irqreturn_t ab8500_charger_usbchargernotokr_handler(int irq, void *_di)
+{
+ struct ab8500_charger *di = _di;
+
+ dev_dbg(di->dev, "Not allowed USB charger detected\n");
+ queue_delayed_work(di->charger_wq, &di->check_usbchgnotok_work, 0);
+
+ return IRQ_HANDLED;
+}
+
+/**
+ * ab8500_charger_chwdexp_handler() - Charger watchdog expired
+ * @irq: interrupt number
+ * @_di: pointer to the ab8500_charger structure
+ *
+ * Returns IRQ status(IRQ_HANDLED)
+ */
+static irqreturn_t ab8500_charger_chwdexp_handler(int irq, void *_di)
+{
+ struct ab8500_charger *di = _di;
+
+ dev_dbg(di->dev, "Charger watchdog expired\n");
+
+ /*
+ * The charger that was online when the watchdog expired
+ * needs to be restarted for charging to start again
+ */
+ if (di->ac.charger_online) {
+ di->ac.wd_expired = true;
+ ab8500_power_supply_changed(di, di->ac_chg.psy);
+ }
+ if (di->usb.charger_online) {
+ di->usb.wd_expired = true;
+ ab8500_power_supply_changed(di, di->usb_chg.psy);
+ }
+
+ return IRQ_HANDLED;
+}
+
+/**
+ * ab8500_charger_vbuschdropend_handler() - VBUS drop removed
+ * @irq: interrupt number
+ * @_di: pointer to the ab8500_charger structure
+ *
+ * Returns IRQ status(IRQ_HANDLED)
+ */
+static irqreturn_t ab8500_charger_vbuschdropend_handler(int irq, void *_di)
+{
+ struct ab8500_charger *di = _di;
+
+ dev_dbg(di->dev, "VBUS charger drop ended\n");
+ di->flags.vbus_drop_end = true;
+
+ /*
+ * VBUS might have dropped due to bad connection.
+ * Schedule a new input limit set to the value SW requests.
+ */
+ queue_delayed_work(di->charger_wq, &di->vbus_drop_end_work,
+ round_jiffies(VBUS_IN_CURR_LIM_RETRY_SET_TIME * HZ));
+
+ return IRQ_HANDLED;
+}
+
+/**
+ * ab8500_charger_vbusovv_handler() - VBUS overvoltage detected
+ * @irq: interrupt number
+ * @_di: pointer to the ab8500_charger structure
+ *
+ * Returns IRQ status(IRQ_HANDLED)
+ */
+static irqreturn_t ab8500_charger_vbusovv_handler(int irq, void *_di)
+{
+ struct ab8500_charger *di = _di;
+
+ dev_dbg(di->dev, "VBUS overvoltage detected\n");
+ di->flags.vbus_ovv = true;
+ ab8500_power_supply_changed(di, di->usb_chg.psy);
+
+ /* Schedule a new HW failure check */
+ queue_delayed_work(di->charger_wq, &di->check_hw_failure_work, 0);
+
+ return IRQ_HANDLED;
+}
+
+/**
+ * ab8500_charger_ac_get_property() - get the ac/mains properties
+ * @psy: pointer to the power_supply structure
+ * @psp: pointer to the power_supply_property structure
+ * @val: pointer to the power_supply_propval union
+ *
+ * This function gets called when an application tries to get the ac/mains
+ * properties by reading the sysfs files.
+ * AC/Mains properties are online, present and voltage.
+ * online: ac/mains charging is in progress or not
+ * present: presence of the ac/mains
+ * voltage: AC/Mains voltage
+ * Returns error code in case of failure else 0(on success)
+ */
+static int ab8500_charger_ac_get_property(struct power_supply *psy,
+ enum power_supply_property psp,
+ union power_supply_propval *val)
+{
+ struct ab8500_charger *di;
+ int ret;
+
+ di = to_ab8500_charger_ac_device_info(psy_to_ux500_charger(psy));
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_HEALTH:
+ if (di->flags.mainextchnotok)
+ val->intval = POWER_SUPPLY_HEALTH_UNSPEC_FAILURE;
+ else if (di->ac.wd_expired || di->usb.wd_expired)
+ val->intval = POWER_SUPPLY_HEALTH_DEAD;
+ else if (di->flags.main_thermal_prot)
+ val->intval = POWER_SUPPLY_HEALTH_OVERHEAT;
+ else
+ val->intval = POWER_SUPPLY_HEALTH_GOOD;
+ break;
+ case POWER_SUPPLY_PROP_ONLINE:
+ val->intval = di->ac.charger_online;
+ break;
+ case POWER_SUPPLY_PROP_PRESENT:
+ val->intval = di->ac.charger_connected;
+ break;
+ case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+ ret = ab8500_charger_get_ac_voltage(di);
+ if (ret >= 0)
+ di->ac.charger_voltage = ret;
+ /* On error, use previous value */
+ val->intval = di->ac.charger_voltage * 1000;
+ break;
+ case POWER_SUPPLY_PROP_VOLTAGE_AVG:
+ /*
+ * This property is used to indicate when CV mode is entered
+ * for the AC charger
+ */
+ di->ac.cv_active = ab8500_charger_ac_cv(di);
+ val->intval = di->ac.cv_active;
+ break;
+ case POWER_SUPPLY_PROP_CURRENT_NOW:
+ ret = ab8500_charger_get_ac_current(di);
+ if (ret >= 0)
+ di->ac.charger_current = ret;
+ val->intval = di->ac.charger_current * 1000;
+ break;
+ default:
+ return -EINVAL;
+ }
+ return 0;
+}
+
+/**
+ * ab8500_charger_usb_get_property() - get the usb properties
+ * @psy: pointer to the power_supply structure
+ * @psp: pointer to the power_supply_property structure
+ * @val: pointer to the power_supply_propval union
+ *
+ * This function gets called when an application tries to get the usb
+ * properties by reading the sysfs files.
+ * USB properties are online, present and voltage.
+ * online: usb charging is in progress or not
+ * present: presence of the usb
+ * voltage: vbus voltage
+ * Returns error code in case of failure else 0(on success)
+ */
+static int ab8500_charger_usb_get_property(struct power_supply *psy,
+ enum power_supply_property psp,
+ union power_supply_propval *val)
+{
+ struct ab8500_charger *di;
+ int ret;
+
+ di = to_ab8500_charger_usb_device_info(psy_to_ux500_charger(psy));
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_HEALTH:
+ if (di->flags.usbchargernotok)
+ val->intval = POWER_SUPPLY_HEALTH_UNSPEC_FAILURE;
+ else if (di->ac.wd_expired || di->usb.wd_expired)
+ val->intval = POWER_SUPPLY_HEALTH_DEAD;
+ else if (di->flags.usb_thermal_prot)
+ val->intval = POWER_SUPPLY_HEALTH_OVERHEAT;
+ else if (di->flags.vbus_ovv)
+ val->intval = POWER_SUPPLY_HEALTH_OVERVOLTAGE;
+ else
+ val->intval = POWER_SUPPLY_HEALTH_GOOD;
+ break;
+ case POWER_SUPPLY_PROP_ONLINE:
+ val->intval = di->usb.charger_online;
+ break;
+ case POWER_SUPPLY_PROP_PRESENT:
+ val->intval = di->usb.charger_connected;
+ break;
+ case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+ ret = ab8500_charger_get_vbus_voltage(di);
+ if (ret >= 0)
+ di->usb.charger_voltage = ret;
+ val->intval = di->usb.charger_voltage * 1000;
+ break;
+ case POWER_SUPPLY_PROP_VOLTAGE_AVG:
+ /*
+ * This property is used to indicate when CV mode is entered
+ * for the USB charger
+ */
+ di->usb.cv_active = ab8500_charger_usb_cv(di);
+ val->intval = di->usb.cv_active;
+ break;
+ case POWER_SUPPLY_PROP_CURRENT_NOW:
+ ret = ab8500_charger_get_usb_current(di);
+ if (ret >= 0)
+ di->usb.charger_current = ret;
+ val->intval = di->usb.charger_current * 1000;
+ break;
+ case POWER_SUPPLY_PROP_CURRENT_AVG:
+ /*
+ * This property is used to indicate when VBUS has collapsed
+ * due to too high output current from the USB charger
+ */
+ if (di->flags.vbus_collapse)
+ val->intval = 1;
+ else
+ val->intval = 0;
+ break;
+ default:
+ return -EINVAL;
+ }
+ return 0;
+}
+
+/**
+ * ab8500_charger_init_hw_registers() - Set up charger related registers
+ * @di: pointer to the ab8500_charger structure
+ *
+ * Set up charger OVV, watchdog and maximum voltage registers as well as
+ * charging of the backup battery
+ */
+static int ab8500_charger_init_hw_registers(struct ab8500_charger *di)
+{
+ int ret = 0;
+
+ /* Setup maximum charger current and voltage for ABB cut2.0 */
+ if (!is_ab8500_1p1_or_earlier(di->parent)) {
+ ret = abx500_set_register_interruptible(di->dev,
+ AB8500_CHARGER,
+ AB8500_CH_VOLT_LVL_MAX_REG, CH_VOL_LVL_4P6);
+ if (ret) {
+ dev_err(di->dev,
+ "failed to set CH_VOLT_LVL_MAX_REG\n");
+ goto out;
+ }
+
+ ret = abx500_set_register_interruptible(di->dev,
+ AB8500_CHARGER, AB8500_CH_OPT_CRNTLVL_MAX_REG,
+ CH_OP_CUR_LVL_1P6);
+ if (ret) {
+ dev_err(di->dev,
+ "failed to set CH_OPT_CRNTLVL_MAX_REG\n");
+ goto out;
+ }
+ }
+
+ if (is_ab8505_2p0(di->parent))
+ ret = abx500_mask_and_set_register_interruptible(di->dev,
+ AB8500_CHARGER,
+ AB8500_USBCH_CTRL2_REG,
+ VBUS_AUTO_IN_CURR_LIM_ENA,
+ VBUS_AUTO_IN_CURR_LIM_ENA);
+ else
+ /*
+ * VBUS OVV set to 6.3V and enable automatic current limitation
+ */
+ ret = abx500_set_register_interruptible(di->dev,
+ AB8500_CHARGER,
+ AB8500_USBCH_CTRL2_REG,
+ VBUS_OVV_SELECT_6P3V | VBUS_AUTO_IN_CURR_LIM_ENA);
+ if (ret) {
+ dev_err(di->dev,
+ "failed to set automatic current limitation\n");
+ goto out;
+ }
+
+ /* Enable main watchdog in OTP */
+ ret = abx500_set_register_interruptible(di->dev,
+ AB8500_OTP_EMUL, AB8500_OTP_CONF_15, OTP_ENABLE_WD);
+ if (ret) {
+ dev_err(di->dev, "failed to enable main WD in OTP\n");
+ goto out;
+ }
+
+ /* Enable main watchdog */
+ ret = abx500_set_register_interruptible(di->dev,
+ AB8500_SYS_CTRL2_BLOCK,
+ AB8500_MAIN_WDOG_CTRL_REG, MAIN_WDOG_ENA);
+ if (ret) {
+ dev_err(di->dev, "failed to enable main watchdog\n");
+ goto out;
+ }
+
+ /*
+ * Due to internal synchronisation, Enable and Kick watchdog bits
+ * cannot be enabled in a single write.
+ * A minimum delay of 2*32 kHz period (62.5µs) must be inserted
+ * between writing Enable then Kick bits.
+ */
+ udelay(63);
+
+ /* Kick main watchdog */
+ ret = abx500_set_register_interruptible(di->dev,
+ AB8500_SYS_CTRL2_BLOCK,
+ AB8500_MAIN_WDOG_CTRL_REG,
+ (MAIN_WDOG_ENA | MAIN_WDOG_KICK));
+ if (ret) {
+ dev_err(di->dev, "failed to kick main watchdog\n");
+ goto out;
+ }
+
+ /* Disable main watchdog */
+ ret = abx500_set_register_interruptible(di->dev,
+ AB8500_SYS_CTRL2_BLOCK,
+ AB8500_MAIN_WDOG_CTRL_REG, MAIN_WDOG_DIS);
+ if (ret) {
+ dev_err(di->dev, "failed to disable main watchdog\n");
+ goto out;
+ }
+
+ /* Set watchdog timeout */
+ ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER,
+ AB8500_CH_WD_TIMER_REG, WD_TIMER);
+ if (ret) {
+ dev_err(di->dev, "failed to set charger watchdog timeout\n");
+ goto out;
+ }
+
+ ret = ab8500_charger_led_en(di, false);
+ if (ret < 0) {
+ dev_err(di->dev, "failed to disable LED\n");
+ goto out;
+ }
+
+ ret = abx500_set_register_interruptible(di->dev,
+ AB8500_RTC,
+ AB8500_RTC_BACKUP_CHG_REG,
+ (di->bm->bkup_bat_v & 0x3) | di->bm->bkup_bat_i);
+ if (ret) {
+ dev_err(di->dev, "failed to setup backup battery charging\n");
+ goto out;
+ }
+
+ /* Enable backup battery charging */
+ ret = abx500_mask_and_set_register_interruptible(di->dev,
+ AB8500_RTC, AB8500_RTC_CTRL_REG,
+ RTC_BUP_CH_ENA, RTC_BUP_CH_ENA);
+ if (ret < 0) {
+ dev_err(di->dev, "%s mask and set failed\n", __func__);
+ goto out;
+ }
+
+out:
+ return ret;
+}
+
+/*
+ * ab8500 charger driver interrupts and their respective isr
+ */
+static struct ab8500_charger_interrupts ab8500_charger_irq[] = {
+ {"MAIN_CH_UNPLUG_DET", ab8500_charger_mainchunplugdet_handler},
+ {"MAIN_CHARGE_PLUG_DET", ab8500_charger_mainchplugdet_handler},
+ {"MAIN_EXT_CH_NOT_OK", ab8500_charger_mainextchnotok_handler},
+ {"MAIN_CH_TH_PROT_R", ab8500_charger_mainchthprotr_handler},
+ {"MAIN_CH_TH_PROT_F", ab8500_charger_mainchthprotf_handler},
+ {"VBUS_DET_F", ab8500_charger_vbusdetf_handler},
+ {"VBUS_DET_R", ab8500_charger_vbusdetr_handler},
+ {"USB_LINK_STATUS", ab8500_charger_usblinkstatus_handler},
+ {"USB_CH_TH_PROT_R", ab8500_charger_usbchthprotr_handler},
+ {"USB_CH_TH_PROT_F", ab8500_charger_usbchthprotf_handler},
+ {"USB_CHARGER_NOT_OKR", ab8500_charger_usbchargernotokr_handler},
+ {"VBUS_OVV", ab8500_charger_vbusovv_handler},
+ {"CH_WD_EXP", ab8500_charger_chwdexp_handler},
+ {"VBUS_CH_DROP_END", ab8500_charger_vbuschdropend_handler},
+};
+
+static int ab8500_charger_usb_notifier_call(struct notifier_block *nb,
+ unsigned long event, void *power)
+{
+ struct ab8500_charger *di =
+ container_of(nb, struct ab8500_charger, nb);
+ enum ab8500_usb_state bm_usb_state;
+ unsigned mA = *((unsigned *)power);
+
+ if (!di)
+ return NOTIFY_DONE;
+
+ if (event != USB_EVENT_VBUS) {
+ dev_dbg(di->dev, "not a standard host, returning\n");
+ return NOTIFY_DONE;
+ }
+
+ /* TODO: State is fabricate here. See if charger really needs USB
+ * state or if mA is enough
+ */
+ if ((di->usb_state.usb_current == 2) && (mA > 2))
+ bm_usb_state = AB8500_BM_USB_STATE_RESUME;
+ else if (mA == 0)
+ bm_usb_state = AB8500_BM_USB_STATE_RESET_HS;
+ else if (mA == 2)
+ bm_usb_state = AB8500_BM_USB_STATE_SUSPEND;
+ else if (mA >= 8) /* 8, 100, 500 */
+ bm_usb_state = AB8500_BM_USB_STATE_CONFIGURED;
+ else /* Should never occur */
+ bm_usb_state = AB8500_BM_USB_STATE_RESET_FS;
+
+ dev_dbg(di->dev, "%s usb_state: 0x%02x mA: %d\n",
+ __func__, bm_usb_state, mA);
+
+ spin_lock(&di->usb_state.usb_lock);
+ di->usb_state.state_tmp = bm_usb_state;
+ di->usb_state.usb_current_tmp = mA;
+ spin_unlock(&di->usb_state.usb_lock);
+
+ /*
+ * wait for some time until you get updates from the usb stack
+ * and negotiations are completed
+ */
+ queue_delayed_work(di->charger_wq, &di->usb_state_changed_work, HZ/2);
+
+ return NOTIFY_OK;
+}
+
+#if defined(CONFIG_PM)
+static int ab8500_charger_resume(struct platform_device *pdev)
+{
+ int ret;
+ struct ab8500_charger *di = platform_get_drvdata(pdev);
+
+ /*
+ * For ABB revision 1.0 and 1.1 there is a bug in the watchdog
+ * logic. That means we have to continuously kick the charger
+ * watchdog even when no charger is connected. This is only
+ * valid once the AC charger has been enabled. This is
+ * a bug that is not handled by the algorithm and the
+ * watchdog have to be kicked by the charger driver
+ * when the AC charger is disabled
+ */
+ if (di->ac_conn && is_ab8500_1p1_or_earlier(di->parent)) {
+ ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER,
+ AB8500_CHARG_WD_CTRL, CHARG_WD_KICK);
+ if (ret)
+ dev_err(di->dev, "Failed to kick WD!\n");
+
+ /* If not already pending start a new timer */
+ queue_delayed_work(di->charger_wq, &di->kick_wd_work,
+ round_jiffies(WD_KICK_INTERVAL));
+ }
+
+ /* If we still have a HW failure, schedule a new check */
+ if (di->flags.mainextchnotok || di->flags.vbus_ovv) {
+ queue_delayed_work(di->charger_wq,
+ &di->check_hw_failure_work, 0);
+ }
+
+ if (di->flags.vbus_drop_end)
+ queue_delayed_work(di->charger_wq, &di->vbus_drop_end_work, 0);
+
+ return 0;
+}
+
+static int ab8500_charger_suspend(struct platform_device *pdev,
+ pm_message_t state)
+{
+ struct ab8500_charger *di = platform_get_drvdata(pdev);
+
+ /* Cancel any pending jobs */
+ cancel_delayed_work(&di->check_hw_failure_work);
+ cancel_delayed_work(&di->vbus_drop_end_work);
+
+ flush_delayed_work(&di->attach_work);
+ flush_delayed_work(&di->usb_charger_attached_work);
+ flush_delayed_work(&di->ac_charger_attached_work);
+ flush_delayed_work(&di->check_usbchgnotok_work);
+ flush_delayed_work(&di->check_vbat_work);
+ flush_delayed_work(&di->kick_wd_work);
+
+ flush_work(&di->usb_link_status_work);
+ flush_work(&di->ac_work);
+ flush_work(&di->detect_usb_type_work);
+
+ if (atomic_read(&di->current_stepping_sessions))
+ return -EAGAIN;
+
+ return 0;
+}
+#else
+#define ab8500_charger_suspend NULL
+#define ab8500_charger_resume NULL
+#endif
+
+static struct notifier_block charger_nb = {
+ .notifier_call = ab8500_external_charger_prepare,
+};
+
+static int ab8500_charger_remove(struct platform_device *pdev)
+{
+ struct ab8500_charger *di = platform_get_drvdata(pdev);
+ int i, irq, ret;
+
+ /* Disable AC charging */
+ ab8500_charger_ac_en(&di->ac_chg, false, 0, 0);
+
+ /* Disable USB charging */
+ ab8500_charger_usb_en(&di->usb_chg, false, 0, 0);
+
+ /* Disable interrupts */
+ for (i = 0; i < ARRAY_SIZE(ab8500_charger_irq); i++) {
+ irq = platform_get_irq_byname(pdev, ab8500_charger_irq[i].name);
+ free_irq(irq, di);
+ }
+
+ /* Backup battery voltage and current disable */
+ ret = abx500_mask_and_set_register_interruptible(di->dev,
+ AB8500_RTC, AB8500_RTC_CTRL_REG, RTC_BUP_CH_ENA, 0);
+ if (ret < 0)
+ dev_err(di->dev, "%s mask and set failed\n", __func__);
+
+ usb_unregister_notifier(di->usb_phy, &di->nb);
+ usb_put_phy(di->usb_phy);
+
+ /* Delete the work queue */
+ destroy_workqueue(di->charger_wq);
+
+ /* Unregister external charger enable notifier */
+ if (!di->ac_chg.enabled)
+ blocking_notifier_chain_unregister(
+ &charger_notifier_list, &charger_nb);
+
+ flush_scheduled_work();
+ if (di->usb_chg.enabled)
+ power_supply_unregister(di->usb_chg.psy);
+
+ if (di->ac_chg.enabled && !di->ac_chg.external)
+ power_supply_unregister(di->ac_chg.psy);
+
+ return 0;
+}
+
+static char *supply_interface[] = {
+ "ab8500_chargalg",
+ "ab8500_fg",
+ "ab8500_btemp",
+};
+
+static const struct power_supply_desc ab8500_ac_chg_desc = {
+ .name = "ab8500_ac",
+ .type = POWER_SUPPLY_TYPE_MAINS,
+ .properties = ab8500_charger_ac_props,
+ .num_properties = ARRAY_SIZE(ab8500_charger_ac_props),
+ .get_property = ab8500_charger_ac_get_property,
+};
+
+static const struct power_supply_desc ab8500_usb_chg_desc = {
+ .name = "ab8500_usb",
+ .type = POWER_SUPPLY_TYPE_USB,
+ .properties = ab8500_charger_usb_props,
+ .num_properties = ARRAY_SIZE(ab8500_charger_usb_props),
+ .get_property = ab8500_charger_usb_get_property,
+};
+
+static int ab8500_charger_probe(struct platform_device *pdev)
+{
+ struct device_node *np = pdev->dev.of_node;
+ struct abx500_bm_data *plat = pdev->dev.platform_data;
+ struct power_supply_config ac_psy_cfg = {}, usb_psy_cfg = {};
+ struct ab8500_charger *di;
+ int irq, i, charger_status, ret = 0, ch_stat;
+
+ di = devm_kzalloc(&pdev->dev, sizeof(*di), GFP_KERNEL);
+ if (!di) {
+ dev_err(&pdev->dev, "%s no mem for ab8500_charger\n", __func__);
+ return -ENOMEM;
+ }
+
+ if (!plat) {
+ dev_err(&pdev->dev, "no battery management data supplied\n");
+ return -EINVAL;
+ }
+ di->bm = plat;
+
+ if (np) {
+ ret = ab8500_bm_of_probe(&pdev->dev, np, di->bm);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to get battery information\n");
+ return ret;
+ }
+ di->autopower_cfg = of_property_read_bool(np, "autopower_cfg");
+ } else
+ di->autopower_cfg = false;
+
+ /* get parent data */
+ di->dev = &pdev->dev;
+ di->parent = dev_get_drvdata(pdev->dev.parent);
+
+ /* Get ADC channels */
+ di->adc_main_charger_v = devm_iio_channel_get(&pdev->dev,
+ "main_charger_v");
+ if (IS_ERR(di->adc_main_charger_v)) {
+ if (PTR_ERR(di->adc_main_charger_v) == -ENODEV)
+ return -EPROBE_DEFER;
+ dev_err(&pdev->dev, "failed to get ADC main charger voltage\n");
+ return PTR_ERR(di->adc_main_charger_v);
+ }
+ di->adc_main_charger_c = devm_iio_channel_get(&pdev->dev,
+ "main_charger_c");
+ if (IS_ERR(di->adc_main_charger_c)) {
+ if (PTR_ERR(di->adc_main_charger_c) == -ENODEV)
+ return -EPROBE_DEFER;
+ dev_err(&pdev->dev, "failed to get ADC main charger current\n");
+ return PTR_ERR(di->adc_main_charger_c);
+ }
+ di->adc_vbus_v = devm_iio_channel_get(&pdev->dev, "vbus_v");
+ if (IS_ERR(di->adc_vbus_v)) {
+ if (PTR_ERR(di->adc_vbus_v) == -ENODEV)
+ return -EPROBE_DEFER;
+ dev_err(&pdev->dev, "failed to get ADC USB charger voltage\n");
+ return PTR_ERR(di->adc_vbus_v);
+ }
+ di->adc_usb_charger_c = devm_iio_channel_get(&pdev->dev,
+ "usb_charger_c");
+ if (IS_ERR(di->adc_usb_charger_c)) {
+ if (PTR_ERR(di->adc_usb_charger_c) == -ENODEV)
+ return -EPROBE_DEFER;
+ dev_err(&pdev->dev, "failed to get ADC USB charger current\n");
+ return PTR_ERR(di->adc_usb_charger_c);
+ }
+
+ /* initialize lock */
+ spin_lock_init(&di->usb_state.usb_lock);
+ mutex_init(&di->usb_ipt_crnt_lock);
+
+ di->autopower = false;
+ di->invalid_charger_detect_state = 0;
+
+ /* AC and USB supply config */
+ ac_psy_cfg.supplied_to = supply_interface;
+ ac_psy_cfg.num_supplicants = ARRAY_SIZE(supply_interface);
+ ac_psy_cfg.drv_data = &di->ac_chg;
+ usb_psy_cfg.supplied_to = supply_interface;
+ usb_psy_cfg.num_supplicants = ARRAY_SIZE(supply_interface);
+ usb_psy_cfg.drv_data = &di->usb_chg;
+
+ /* AC supply */
+ /* ux500_charger sub-class */
+ di->ac_chg.ops.enable = &ab8500_charger_ac_en;
+ di->ac_chg.ops.check_enable = &ab8500_charger_ac_check_enable;
+ di->ac_chg.ops.kick_wd = &ab8500_charger_watchdog_kick;
+ di->ac_chg.ops.update_curr = &ab8500_charger_update_charger_current;
+ di->ac_chg.max_out_volt = ab8500_charger_voltage_map[
+ ARRAY_SIZE(ab8500_charger_voltage_map) - 1];
+ di->ac_chg.max_out_curr =
+ di->bm->chg_output_curr[di->bm->n_chg_out_curr - 1];
+ di->ac_chg.wdt_refresh = CHG_WD_INTERVAL;
+ di->ac_chg.enabled = di->bm->ac_enabled;
+ di->ac_chg.external = false;
+
+ /*notifier for external charger enabling*/
+ if (!di->ac_chg.enabled)
+ blocking_notifier_chain_register(
+ &charger_notifier_list, &charger_nb);
+
+ /* USB supply */
+ /* ux500_charger sub-class */
+ di->usb_chg.ops.enable = &ab8500_charger_usb_en;
+ di->usb_chg.ops.check_enable = &ab8500_charger_usb_check_enable;
+ di->usb_chg.ops.kick_wd = &ab8500_charger_watchdog_kick;
+ di->usb_chg.ops.update_curr = &ab8500_charger_update_charger_current;
+ di->usb_chg.max_out_volt = ab8500_charger_voltage_map[
+ ARRAY_SIZE(ab8500_charger_voltage_map) - 1];
+ di->usb_chg.max_out_curr =
+ di->bm->chg_output_curr[di->bm->n_chg_out_curr - 1];
+ di->usb_chg.wdt_refresh = CHG_WD_INTERVAL;
+ di->usb_chg.enabled = di->bm->usb_enabled;
+ di->usb_chg.external = false;
+ di->usb_state.usb_current = -1;
+
+ /* Create a work queue for the charger */
+ di->charger_wq = alloc_ordered_workqueue("ab8500_charger_wq",
+ WQ_MEM_RECLAIM);
+ if (di->charger_wq == NULL) {
+ dev_err(di->dev, "failed to create work queue\n");
+ return -ENOMEM;
+ }
+
+ mutex_init(&di->charger_attached_mutex);
+
+ /* Init work for HW failure check */
+ INIT_DEFERRABLE_WORK(&di->check_hw_failure_work,
+ ab8500_charger_check_hw_failure_work);
+ INIT_DEFERRABLE_WORK(&di->check_usbchgnotok_work,
+ ab8500_charger_check_usbchargernotok_work);
+
+ INIT_DELAYED_WORK(&di->ac_charger_attached_work,
+ ab8500_charger_ac_attached_work);
+ INIT_DELAYED_WORK(&di->usb_charger_attached_work,
+ ab8500_charger_usb_attached_work);
+
+ /*
+ * For ABB revision 1.0 and 1.1 there is a bug in the watchdog
+ * logic. That means we have to continuously kick the charger
+ * watchdog even when no charger is connected. This is only
+ * valid once the AC charger has been enabled. This is
+ * a bug that is not handled by the algorithm and the
+ * watchdog have to be kicked by the charger driver
+ * when the AC charger is disabled
+ */
+ INIT_DEFERRABLE_WORK(&di->kick_wd_work,
+ ab8500_charger_kick_watchdog_work);
+
+ INIT_DEFERRABLE_WORK(&di->check_vbat_work,
+ ab8500_charger_check_vbat_work);
+
+ INIT_DELAYED_WORK(&di->attach_work,
+ ab8500_charger_usb_link_attach_work);
+
+ INIT_DELAYED_WORK(&di->usb_state_changed_work,
+ ab8500_charger_usb_state_changed_work);
+
+ INIT_DELAYED_WORK(&di->vbus_drop_end_work,
+ ab8500_charger_vbus_drop_end_work);
+
+ /* Init work for charger detection */
+ INIT_WORK(&di->usb_link_status_work,
+ ab8500_charger_usb_link_status_work);
+ INIT_WORK(&di->ac_work, ab8500_charger_ac_work);
+ INIT_WORK(&di->detect_usb_type_work,
+ ab8500_charger_detect_usb_type_work);
+
+ /* Init work for checking HW status */
+ INIT_WORK(&di->check_main_thermal_prot_work,
+ ab8500_charger_check_main_thermal_prot_work);
+ INIT_WORK(&di->check_usb_thermal_prot_work,
+ ab8500_charger_check_usb_thermal_prot_work);
+
+ /*
+ * VDD ADC supply needs to be enabled from this driver when there
+ * is a charger connected to avoid erroneous BTEMP_HIGH/LOW
+ * interrupts during charging
+ */
+ di->regu = devm_regulator_get(di->dev, "vddadc");
+ if (IS_ERR(di->regu)) {
+ ret = PTR_ERR(di->regu);
+ dev_err(di->dev, "failed to get vddadc regulator\n");
+ goto free_charger_wq;
+ }
+
+
+ /* Initialize OVV, and other registers */
+ ret = ab8500_charger_init_hw_registers(di);
+ if (ret) {
+ dev_err(di->dev, "failed to initialize ABB registers\n");
+ goto free_charger_wq;
+ }
+
+ /* Register AC charger class */
+ if (di->ac_chg.enabled) {
+ di->ac_chg.psy = power_supply_register(di->dev,
+ &ab8500_ac_chg_desc,
+ &ac_psy_cfg);
+ if (IS_ERR(di->ac_chg.psy)) {
+ dev_err(di->dev, "failed to register AC charger\n");
+ ret = PTR_ERR(di->ac_chg.psy);
+ goto free_charger_wq;
+ }
+ }
+
+ /* Register USB charger class */
+ if (di->usb_chg.enabled) {
+ di->usb_chg.psy = power_supply_register(di->dev,
+ &ab8500_usb_chg_desc,
+ &usb_psy_cfg);
+ if (IS_ERR(di->usb_chg.psy)) {
+ dev_err(di->dev, "failed to register USB charger\n");
+ ret = PTR_ERR(di->usb_chg.psy);
+ goto free_ac;
+ }
+ }
+
+ di->usb_phy = usb_get_phy(USB_PHY_TYPE_USB2);
+ if (IS_ERR_OR_NULL(di->usb_phy)) {
+ dev_err(di->dev, "failed to get usb transceiver\n");
+ ret = -EINVAL;
+ goto free_usb;
+ }
+ di->nb.notifier_call = ab8500_charger_usb_notifier_call;
+ ret = usb_register_notifier(di->usb_phy, &di->nb);
+ if (ret) {
+ dev_err(di->dev, "failed to register usb notifier\n");
+ goto put_usb_phy;
+ }
+
+ /* Identify the connected charger types during startup */
+ charger_status = ab8500_charger_detect_chargers(di, true);
+ if (charger_status & AC_PW_CONN) {
+ di->ac.charger_connected = 1;
+ di->ac_conn = true;
+ ab8500_power_supply_changed(di, di->ac_chg.psy);
+ sysfs_notify(&di->ac_chg.psy->dev.kobj, NULL, "present");
+ }
+
+ if (charger_status & USB_PW_CONN) {
+ di->vbus_detected = true;
+ di->vbus_detected_start = true;
+ queue_work(di->charger_wq,
+ &di->detect_usb_type_work);
+ }
+
+ /* Register interrupts */
+ for (i = 0; i < ARRAY_SIZE(ab8500_charger_irq); i++) {
+ irq = platform_get_irq_byname(pdev, ab8500_charger_irq[i].name);
+ if (irq < 0) {
+ ret = irq;
+ goto free_irq;
+ }
+
+ ret = request_threaded_irq(irq, NULL, ab8500_charger_irq[i].isr,
+ IRQF_SHARED | IRQF_NO_SUSPEND,
+ ab8500_charger_irq[i].name, di);
+
+ if (ret != 0) {
+ dev_err(di->dev, "failed to request %s IRQ %d: %d\n"
+ , ab8500_charger_irq[i].name, irq, ret);
+ goto free_irq;
+ }
+ dev_dbg(di->dev, "Requested %s IRQ %d: %d\n",
+ ab8500_charger_irq[i].name, irq, ret);
+ }
+
+ platform_set_drvdata(pdev, di);
+
+ mutex_lock(&di->charger_attached_mutex);
+
+ ch_stat = ab8500_charger_detect_chargers(di, false);
+
+ if ((ch_stat & AC_PW_CONN) == AC_PW_CONN) {
+ if (is_ab8500(di->parent))
+ queue_delayed_work(di->charger_wq,
+ &di->ac_charger_attached_work,
+ HZ);
+ }
+ if ((ch_stat & USB_PW_CONN) == USB_PW_CONN) {
+ if (is_ab8500(di->parent))
+ queue_delayed_work(di->charger_wq,
+ &di->usb_charger_attached_work,
+ HZ);
+ }
+
+ mutex_unlock(&di->charger_attached_mutex);
+
+ return ret;
+
+free_irq:
+ usb_unregister_notifier(di->usb_phy, &di->nb);
+
+ /* We also have to free all successfully registered irqs */
+ for (i = i - 1; i >= 0; i--) {
+ irq = platform_get_irq_byname(pdev, ab8500_charger_irq[i].name);
+ free_irq(irq, di);
+ }
+put_usb_phy:
+ usb_put_phy(di->usb_phy);
+free_usb:
+ if (di->usb_chg.enabled)
+ power_supply_unregister(di->usb_chg.psy);
+free_ac:
+ if (di->ac_chg.enabled)
+ power_supply_unregister(di->ac_chg.psy);
+free_charger_wq:
+ destroy_workqueue(di->charger_wq);
+ return ret;
+}
+
+static const struct of_device_id ab8500_charger_match[] = {
+ { .compatible = "stericsson,ab8500-charger", },
+ { },
+};
+MODULE_DEVICE_TABLE(of, ab8500_charger_match);
+
+static struct platform_driver ab8500_charger_driver = {
+ .probe = ab8500_charger_probe,
+ .remove = ab8500_charger_remove,
+ .suspend = ab8500_charger_suspend,
+ .resume = ab8500_charger_resume,
+ .driver = {
+ .name = "ab8500-charger",
+ .of_match_table = ab8500_charger_match,
+ },
+};
+
+static int __init ab8500_charger_init(void)
+{
+ return platform_driver_register(&ab8500_charger_driver);
+}
+
+static void __exit ab8500_charger_exit(void)
+{
+ platform_driver_unregister(&ab8500_charger_driver);
+}
+
+subsys_initcall_sync(ab8500_charger_init);
+module_exit(ab8500_charger_exit);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Johan Palsson, Karl Komierowski, Arun R Murthy");
+MODULE_ALIAS("platform:ab8500-charger");
+MODULE_DESCRIPTION("AB8500 charger management driver");
diff --git a/drivers/power/supply/ab8500_fg.c b/drivers/power/supply/ab8500_fg.c
new file mode 100644
index 000000000..a88590563
--- /dev/null
+++ b/drivers/power/supply/ab8500_fg.c
@@ -0,0 +1,3281 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) ST-Ericsson AB 2012
+ *
+ * Main and Back-up battery management driver.
+ *
+ * Note: Backup battery management is required in case of Li-Ion battery and not
+ * for capacitive battery. HREF boards have capacitive battery and hence backup
+ * battery management is not used and the supported code is available in this
+ * driver.
+ *
+ * Author:
+ * Johan Palsson <johan.palsson@stericsson.com>
+ * Karl Komierowski <karl.komierowski@stericsson.com>
+ * Arun R Murthy <arun.murthy@stericsson.com>
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/power_supply.h>
+#include <linux/kobject.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/time.h>
+#include <linux/time64.h>
+#include <linux/of.h>
+#include <linux/completion.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/abx500.h>
+#include <linux/mfd/abx500/ab8500.h>
+#include <linux/mfd/abx500/ab8500-bm.h>
+#include <linux/iio/consumer.h>
+#include <linux/kernel.h>
+
+#define MILLI_TO_MICRO 1000
+#define FG_LSB_IN_MA 1627
+#define QLSB_NANO_AMP_HOURS_X10 1071
+#define INS_CURR_TIMEOUT (3 * HZ)
+
+#define SEC_TO_SAMPLE(S) (S * 4)
+
+#define NBR_AVG_SAMPLES 20
+
+#define LOW_BAT_CHECK_INTERVAL (HZ / 16) /* 62.5 ms */
+
+#define VALID_CAPACITY_SEC (45 * 60) /* 45 minutes */
+#define BATT_OK_MIN 2360 /* mV */
+#define BATT_OK_INCREMENT 50 /* mV */
+#define BATT_OK_MAX_NR_INCREMENTS 0xE
+
+/* FG constants */
+#define BATT_OVV 0x01
+
+#define interpolate(x, x1, y1, x2, y2) \
+ ((y1) + ((((y2) - (y1)) * ((x) - (x1))) / ((x2) - (x1))));
+
+/**
+ * struct ab8500_fg_interrupts - ab8500 fg interupts
+ * @name: name of the interrupt
+ * @isr function pointer to the isr
+ */
+struct ab8500_fg_interrupts {
+ char *name;
+ irqreturn_t (*isr)(int irq, void *data);
+};
+
+enum ab8500_fg_discharge_state {
+ AB8500_FG_DISCHARGE_INIT,
+ AB8500_FG_DISCHARGE_INITMEASURING,
+ AB8500_FG_DISCHARGE_INIT_RECOVERY,
+ AB8500_FG_DISCHARGE_RECOVERY,
+ AB8500_FG_DISCHARGE_READOUT_INIT,
+ AB8500_FG_DISCHARGE_READOUT,
+ AB8500_FG_DISCHARGE_WAKEUP,
+};
+
+static char *discharge_state[] = {
+ "DISCHARGE_INIT",
+ "DISCHARGE_INITMEASURING",
+ "DISCHARGE_INIT_RECOVERY",
+ "DISCHARGE_RECOVERY",
+ "DISCHARGE_READOUT_INIT",
+ "DISCHARGE_READOUT",
+ "DISCHARGE_WAKEUP",
+};
+
+enum ab8500_fg_charge_state {
+ AB8500_FG_CHARGE_INIT,
+ AB8500_FG_CHARGE_READOUT,
+};
+
+static char *charge_state[] = {
+ "CHARGE_INIT",
+ "CHARGE_READOUT",
+};
+
+enum ab8500_fg_calibration_state {
+ AB8500_FG_CALIB_INIT,
+ AB8500_FG_CALIB_WAIT,
+ AB8500_FG_CALIB_END,
+};
+
+struct ab8500_fg_avg_cap {
+ int avg;
+ int samples[NBR_AVG_SAMPLES];
+ time64_t time_stamps[NBR_AVG_SAMPLES];
+ int pos;
+ int nbr_samples;
+ int sum;
+};
+
+struct ab8500_fg_cap_scaling {
+ bool enable;
+ int cap_to_scale[2];
+ int disable_cap_level;
+ int scaled_cap;
+};
+
+struct ab8500_fg_battery_capacity {
+ int max_mah_design;
+ int max_mah;
+ int mah;
+ int permille;
+ int level;
+ int prev_mah;
+ int prev_percent;
+ int prev_level;
+ int user_mah;
+ struct ab8500_fg_cap_scaling cap_scale;
+};
+
+struct ab8500_fg_flags {
+ bool fg_enabled;
+ bool conv_done;
+ bool charging;
+ bool fully_charged;
+ bool force_full;
+ bool low_bat_delay;
+ bool low_bat;
+ bool bat_ovv;
+ bool batt_unknown;
+ bool calibrate;
+ bool user_cap;
+ bool batt_id_received;
+};
+
+struct inst_curr_result_list {
+ struct list_head list;
+ int *result;
+};
+
+/**
+ * struct ab8500_fg - ab8500 FG device information
+ * @dev: Pointer to the structure device
+ * @node: a list of AB8500 FGs, hence prepared for reentrance
+ * @irq holds the CCEOC interrupt number
+ * @vbat: Battery voltage in mV
+ * @vbat_nom: Nominal battery voltage in mV
+ * @inst_curr: Instantenous battery current in mA
+ * @avg_curr: Average battery current in mA
+ * @bat_temp battery temperature
+ * @fg_samples: Number of samples used in the FG accumulation
+ * @accu_charge: Accumulated charge from the last conversion
+ * @recovery_cnt: Counter for recovery mode
+ * @high_curr_cnt: Counter for high current mode
+ * @init_cnt: Counter for init mode
+ * @low_bat_cnt Counter for number of consecutive low battery measures
+ * @nbr_cceoc_irq_cnt Counter for number of CCEOC irqs received since enabled
+ * @recovery_needed: Indicate if recovery is needed
+ * @high_curr_mode: Indicate if we're in high current mode
+ * @init_capacity: Indicate if initial capacity measuring should be done
+ * @turn_off_fg: True if fg was off before current measurement
+ * @calib_state State during offset calibration
+ * @discharge_state: Current discharge state
+ * @charge_state: Current charge state
+ * @ab8500_fg_started Completion struct used for the instant current start
+ * @ab8500_fg_complete Completion struct used for the instant current reading
+ * @flags: Structure for information about events triggered
+ * @bat_cap: Structure for battery capacity specific parameters
+ * @avg_cap: Average capacity filter
+ * @parent: Pointer to the struct ab8500
+ * @main_bat_v: ADC channel for the main battery voltage
+ * @bm: Platform specific battery management information
+ * @fg_psy: Structure that holds the FG specific battery properties
+ * @fg_wq: Work queue for running the FG algorithm
+ * @fg_periodic_work: Work to run the FG algorithm periodically
+ * @fg_low_bat_work: Work to check low bat condition
+ * @fg_reinit_work Work used to reset and reinitialise the FG algorithm
+ * @fg_work: Work to run the FG algorithm instantly
+ * @fg_acc_cur_work: Work to read the FG accumulator
+ * @fg_check_hw_failure_work: Work for checking HW state
+ * @cc_lock: Mutex for locking the CC
+ * @fg_kobject: Structure of type kobject
+ */
+struct ab8500_fg {
+ struct device *dev;
+ struct list_head node;
+ int irq;
+ int vbat;
+ int vbat_nom;
+ int inst_curr;
+ int avg_curr;
+ int bat_temp;
+ int fg_samples;
+ int accu_charge;
+ int recovery_cnt;
+ int high_curr_cnt;
+ int init_cnt;
+ int low_bat_cnt;
+ int nbr_cceoc_irq_cnt;
+ bool recovery_needed;
+ bool high_curr_mode;
+ bool init_capacity;
+ bool turn_off_fg;
+ enum ab8500_fg_calibration_state calib_state;
+ enum ab8500_fg_discharge_state discharge_state;
+ enum ab8500_fg_charge_state charge_state;
+ struct completion ab8500_fg_started;
+ struct completion ab8500_fg_complete;
+ struct ab8500_fg_flags flags;
+ struct ab8500_fg_battery_capacity bat_cap;
+ struct ab8500_fg_avg_cap avg_cap;
+ struct ab8500 *parent;
+ struct iio_channel *main_bat_v;
+ struct abx500_bm_data *bm;
+ struct power_supply *fg_psy;
+ struct workqueue_struct *fg_wq;
+ struct delayed_work fg_periodic_work;
+ struct delayed_work fg_low_bat_work;
+ struct delayed_work fg_reinit_work;
+ struct work_struct fg_work;
+ struct work_struct fg_acc_cur_work;
+ struct delayed_work fg_check_hw_failure_work;
+ struct mutex cc_lock;
+ struct kobject fg_kobject;
+};
+static LIST_HEAD(ab8500_fg_list);
+
+/**
+ * ab8500_fg_get() - returns a reference to the primary AB8500 fuel gauge
+ * (i.e. the first fuel gauge in the instance list)
+ */
+struct ab8500_fg *ab8500_fg_get(void)
+{
+ return list_first_entry_or_null(&ab8500_fg_list, struct ab8500_fg,
+ node);
+}
+
+/* Main battery properties */
+static enum power_supply_property ab8500_fg_props[] = {
+ POWER_SUPPLY_PROP_VOLTAGE_NOW,
+ POWER_SUPPLY_PROP_CURRENT_NOW,
+ POWER_SUPPLY_PROP_CURRENT_AVG,
+ POWER_SUPPLY_PROP_ENERGY_FULL_DESIGN,
+ POWER_SUPPLY_PROP_ENERGY_FULL,
+ POWER_SUPPLY_PROP_ENERGY_NOW,
+ POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN,
+ POWER_SUPPLY_PROP_CHARGE_FULL,
+ POWER_SUPPLY_PROP_CHARGE_NOW,
+ POWER_SUPPLY_PROP_CAPACITY,
+ POWER_SUPPLY_PROP_CAPACITY_LEVEL,
+};
+
+/*
+ * This array maps the raw hex value to lowbat voltage used by the AB8500
+ * Values taken from the UM0836
+ */
+static int ab8500_fg_lowbat_voltage_map[] = {
+ 2300 ,
+ 2325 ,
+ 2350 ,
+ 2375 ,
+ 2400 ,
+ 2425 ,
+ 2450 ,
+ 2475 ,
+ 2500 ,
+ 2525 ,
+ 2550 ,
+ 2575 ,
+ 2600 ,
+ 2625 ,
+ 2650 ,
+ 2675 ,
+ 2700 ,
+ 2725 ,
+ 2750 ,
+ 2775 ,
+ 2800 ,
+ 2825 ,
+ 2850 ,
+ 2875 ,
+ 2900 ,
+ 2925 ,
+ 2950 ,
+ 2975 ,
+ 3000 ,
+ 3025 ,
+ 3050 ,
+ 3075 ,
+ 3100 ,
+ 3125 ,
+ 3150 ,
+ 3175 ,
+ 3200 ,
+ 3225 ,
+ 3250 ,
+ 3275 ,
+ 3300 ,
+ 3325 ,
+ 3350 ,
+ 3375 ,
+ 3400 ,
+ 3425 ,
+ 3450 ,
+ 3475 ,
+ 3500 ,
+ 3525 ,
+ 3550 ,
+ 3575 ,
+ 3600 ,
+ 3625 ,
+ 3650 ,
+ 3675 ,
+ 3700 ,
+ 3725 ,
+ 3750 ,
+ 3775 ,
+ 3800 ,
+ 3825 ,
+ 3850 ,
+ 3850 ,
+};
+
+static u8 ab8500_volt_to_regval(int voltage)
+{
+ int i;
+
+ if (voltage < ab8500_fg_lowbat_voltage_map[0])
+ return 0;
+
+ for (i = 0; i < ARRAY_SIZE(ab8500_fg_lowbat_voltage_map); i++) {
+ if (voltage < ab8500_fg_lowbat_voltage_map[i])
+ return (u8) i - 1;
+ }
+
+ /* If not captured above, return index of last element */
+ return (u8) ARRAY_SIZE(ab8500_fg_lowbat_voltage_map) - 1;
+}
+
+/**
+ * ab8500_fg_is_low_curr() - Low or high current mode
+ * @di: pointer to the ab8500_fg structure
+ * @curr: the current to base or our decision on
+ *
+ * Low current mode if the current consumption is below a certain threshold
+ */
+static int ab8500_fg_is_low_curr(struct ab8500_fg *di, int curr)
+{
+ /*
+ * We want to know if we're in low current mode
+ */
+ if (curr > -di->bm->fg_params->high_curr_threshold)
+ return true;
+ else
+ return false;
+}
+
+/**
+ * ab8500_fg_add_cap_sample() - Add capacity to average filter
+ * @di: pointer to the ab8500_fg structure
+ * @sample: the capacity in mAh to add to the filter
+ *
+ * A capacity is added to the filter and a new mean capacity is calculated and
+ * returned
+ */
+static int ab8500_fg_add_cap_sample(struct ab8500_fg *di, int sample)
+{
+ time64_t now = ktime_get_boottime_seconds();
+ struct ab8500_fg_avg_cap *avg = &di->avg_cap;
+
+ do {
+ avg->sum += sample - avg->samples[avg->pos];
+ avg->samples[avg->pos] = sample;
+ avg->time_stamps[avg->pos] = now;
+ avg->pos++;
+
+ if (avg->pos == NBR_AVG_SAMPLES)
+ avg->pos = 0;
+
+ if (avg->nbr_samples < NBR_AVG_SAMPLES)
+ avg->nbr_samples++;
+
+ /*
+ * Check the time stamp for each sample. If too old,
+ * replace with latest sample
+ */
+ } while (now - VALID_CAPACITY_SEC > avg->time_stamps[avg->pos]);
+
+ avg->avg = avg->sum / avg->nbr_samples;
+
+ return avg->avg;
+}
+
+/**
+ * ab8500_fg_clear_cap_samples() - Clear average filter
+ * @di: pointer to the ab8500_fg structure
+ *
+ * The capacity filter is is reset to zero.
+ */
+static void ab8500_fg_clear_cap_samples(struct ab8500_fg *di)
+{
+ int i;
+ struct ab8500_fg_avg_cap *avg = &di->avg_cap;
+
+ avg->pos = 0;
+ avg->nbr_samples = 0;
+ avg->sum = 0;
+ avg->avg = 0;
+
+ for (i = 0; i < NBR_AVG_SAMPLES; i++) {
+ avg->samples[i] = 0;
+ avg->time_stamps[i] = 0;
+ }
+}
+
+/**
+ * ab8500_fg_fill_cap_sample() - Fill average filter
+ * @di: pointer to the ab8500_fg structure
+ * @sample: the capacity in mAh to fill the filter with
+ *
+ * The capacity filter is filled with a capacity in mAh
+ */
+static void ab8500_fg_fill_cap_sample(struct ab8500_fg *di, int sample)
+{
+ int i;
+ time64_t now;
+ struct ab8500_fg_avg_cap *avg = &di->avg_cap;
+
+ now = ktime_get_boottime_seconds();
+
+ for (i = 0; i < NBR_AVG_SAMPLES; i++) {
+ avg->samples[i] = sample;
+ avg->time_stamps[i] = now;
+ }
+
+ avg->pos = 0;
+ avg->nbr_samples = NBR_AVG_SAMPLES;
+ avg->sum = sample * NBR_AVG_SAMPLES;
+ avg->avg = sample;
+}
+
+/**
+ * ab8500_fg_coulomb_counter() - enable coulomb counter
+ * @di: pointer to the ab8500_fg structure
+ * @enable: enable/disable
+ *
+ * Enable/Disable coulomb counter.
+ * On failure returns negative value.
+ */
+static int ab8500_fg_coulomb_counter(struct ab8500_fg *di, bool enable)
+{
+ int ret = 0;
+ mutex_lock(&di->cc_lock);
+ if (enable) {
+ /* To be able to reprogram the number of samples, we have to
+ * first stop the CC and then enable it again */
+ ret = abx500_set_register_interruptible(di->dev, AB8500_RTC,
+ AB8500_RTC_CC_CONF_REG, 0x00);
+ if (ret)
+ goto cc_err;
+
+ /* Program the samples */
+ ret = abx500_set_register_interruptible(di->dev,
+ AB8500_GAS_GAUGE, AB8500_GASG_CC_NCOV_ACCU,
+ di->fg_samples);
+ if (ret)
+ goto cc_err;
+
+ /* Start the CC */
+ ret = abx500_set_register_interruptible(di->dev, AB8500_RTC,
+ AB8500_RTC_CC_CONF_REG,
+ (CC_DEEP_SLEEP_ENA | CC_PWR_UP_ENA));
+ if (ret)
+ goto cc_err;
+
+ di->flags.fg_enabled = true;
+ } else {
+ /* Clear any pending read requests */
+ ret = abx500_mask_and_set_register_interruptible(di->dev,
+ AB8500_GAS_GAUGE, AB8500_GASG_CC_CTRL_REG,
+ (RESET_ACCU | READ_REQ), 0);
+ if (ret)
+ goto cc_err;
+
+ ret = abx500_set_register_interruptible(di->dev,
+ AB8500_GAS_GAUGE, AB8500_GASG_CC_NCOV_ACCU_CTRL, 0);
+ if (ret)
+ goto cc_err;
+
+ /* Stop the CC */
+ ret = abx500_set_register_interruptible(di->dev, AB8500_RTC,
+ AB8500_RTC_CC_CONF_REG, 0);
+ if (ret)
+ goto cc_err;
+
+ di->flags.fg_enabled = false;
+
+ }
+ dev_dbg(di->dev, " CC enabled: %d Samples: %d\n",
+ enable, di->fg_samples);
+
+ mutex_unlock(&di->cc_lock);
+
+ return ret;
+cc_err:
+ dev_err(di->dev, "%s Enabling coulomb counter failed\n", __func__);
+ mutex_unlock(&di->cc_lock);
+ return ret;
+}
+
+/**
+ * ab8500_fg_inst_curr_start() - start battery instantaneous current
+ * @di: pointer to the ab8500_fg structure
+ *
+ * Returns 0 or error code
+ * Note: This is part "one" and has to be called before
+ * ab8500_fg_inst_curr_finalize()
+ */
+int ab8500_fg_inst_curr_start(struct ab8500_fg *di)
+{
+ u8 reg_val;
+ int ret;
+
+ mutex_lock(&di->cc_lock);
+
+ di->nbr_cceoc_irq_cnt = 0;
+ ret = abx500_get_register_interruptible(di->dev, AB8500_RTC,
+ AB8500_RTC_CC_CONF_REG, &reg_val);
+ if (ret < 0)
+ goto fail;
+
+ if (!(reg_val & CC_PWR_UP_ENA)) {
+ dev_dbg(di->dev, "%s Enable FG\n", __func__);
+ di->turn_off_fg = true;
+
+ /* Program the samples */
+ ret = abx500_set_register_interruptible(di->dev,
+ AB8500_GAS_GAUGE, AB8500_GASG_CC_NCOV_ACCU,
+ SEC_TO_SAMPLE(10));
+ if (ret)
+ goto fail;
+
+ /* Start the CC */
+ ret = abx500_set_register_interruptible(di->dev, AB8500_RTC,
+ AB8500_RTC_CC_CONF_REG,
+ (CC_DEEP_SLEEP_ENA | CC_PWR_UP_ENA));
+ if (ret)
+ goto fail;
+ } else {
+ di->turn_off_fg = false;
+ }
+
+ /* Return and WFI */
+ reinit_completion(&di->ab8500_fg_started);
+ reinit_completion(&di->ab8500_fg_complete);
+ enable_irq(di->irq);
+
+ /* Note: cc_lock is still locked */
+ return 0;
+fail:
+ mutex_unlock(&di->cc_lock);
+ return ret;
+}
+
+/**
+ * ab8500_fg_inst_curr_started() - check if fg conversion has started
+ * @di: pointer to the ab8500_fg structure
+ *
+ * Returns 1 if conversion started, 0 if still waiting
+ */
+int ab8500_fg_inst_curr_started(struct ab8500_fg *di)
+{
+ return completion_done(&di->ab8500_fg_started);
+}
+
+/**
+ * ab8500_fg_inst_curr_done() - check if fg conversion is done
+ * @di: pointer to the ab8500_fg structure
+ *
+ * Returns 1 if conversion done, 0 if still waiting
+ */
+int ab8500_fg_inst_curr_done(struct ab8500_fg *di)
+{
+ return completion_done(&di->ab8500_fg_complete);
+}
+
+/**
+ * ab8500_fg_inst_curr_finalize() - battery instantaneous current
+ * @di: pointer to the ab8500_fg structure
+ * @res: battery instantenous current(on success)
+ *
+ * Returns 0 or an error code
+ * Note: This is part "two" and has to be called at earliest 250 ms
+ * after ab8500_fg_inst_curr_start()
+ */
+int ab8500_fg_inst_curr_finalize(struct ab8500_fg *di, int *res)
+{
+ u8 low, high;
+ int val;
+ int ret;
+ unsigned long timeout;
+
+ if (!completion_done(&di->ab8500_fg_complete)) {
+ timeout = wait_for_completion_timeout(
+ &di->ab8500_fg_complete,
+ INS_CURR_TIMEOUT);
+ dev_dbg(di->dev, "Finalize time: %d ms\n",
+ jiffies_to_msecs(INS_CURR_TIMEOUT - timeout));
+ if (!timeout) {
+ ret = -ETIME;
+ disable_irq(di->irq);
+ di->nbr_cceoc_irq_cnt = 0;
+ dev_err(di->dev, "completion timed out [%d]\n",
+ __LINE__);
+ goto fail;
+ }
+ }
+
+ disable_irq(di->irq);
+ di->nbr_cceoc_irq_cnt = 0;
+
+ ret = abx500_mask_and_set_register_interruptible(di->dev,
+ AB8500_GAS_GAUGE, AB8500_GASG_CC_CTRL_REG,
+ READ_REQ, READ_REQ);
+
+ /* 100uS between read request and read is needed */
+ usleep_range(100, 100);
+
+ /* Read CC Sample conversion value Low and high */
+ ret = abx500_get_register_interruptible(di->dev, AB8500_GAS_GAUGE,
+ AB8500_GASG_CC_SMPL_CNVL_REG, &low);
+ if (ret < 0)
+ goto fail;
+
+ ret = abx500_get_register_interruptible(di->dev, AB8500_GAS_GAUGE,
+ AB8500_GASG_CC_SMPL_CNVH_REG, &high);
+ if (ret < 0)
+ goto fail;
+
+ /*
+ * negative value for Discharging
+ * convert 2's complement into decimal
+ */
+ if (high & 0x10)
+ val = (low | (high << 8) | 0xFFFFE000);
+ else
+ val = (low | (high << 8));
+
+ /*
+ * Convert to unit value in mA
+ * Full scale input voltage is
+ * 63.160mV => LSB = 63.160mV/(4096*res) = 1.542mA
+ * Given a 250ms conversion cycle time the LSB corresponds
+ * to 107.1 nAh. Convert to current by dividing by the conversion
+ * time in hours (250ms = 1 / (3600 * 4)h)
+ * 107.1nAh assumes 10mOhm, but fg_res is in 0.1mOhm
+ */
+ val = (val * QLSB_NANO_AMP_HOURS_X10 * 36 * 4) /
+ (1000 * di->bm->fg_res);
+
+ if (di->turn_off_fg) {
+ dev_dbg(di->dev, "%s Disable FG\n", __func__);
+
+ /* Clear any pending read requests */
+ ret = abx500_set_register_interruptible(di->dev,
+ AB8500_GAS_GAUGE, AB8500_GASG_CC_CTRL_REG, 0);
+ if (ret)
+ goto fail;
+
+ /* Stop the CC */
+ ret = abx500_set_register_interruptible(di->dev, AB8500_RTC,
+ AB8500_RTC_CC_CONF_REG, 0);
+ if (ret)
+ goto fail;
+ }
+ mutex_unlock(&di->cc_lock);
+ (*res) = val;
+
+ return 0;
+fail:
+ mutex_unlock(&di->cc_lock);
+ return ret;
+}
+
+/**
+ * ab8500_fg_inst_curr_blocking() - battery instantaneous current
+ * @di: pointer to the ab8500_fg structure
+ * @res: battery instantenous current(on success)
+ *
+ * Returns 0 else error code
+ */
+int ab8500_fg_inst_curr_blocking(struct ab8500_fg *di)
+{
+ int ret;
+ unsigned long timeout;
+ int res = 0;
+
+ ret = ab8500_fg_inst_curr_start(di);
+ if (ret) {
+ dev_err(di->dev, "Failed to initialize fg_inst\n");
+ return 0;
+ }
+
+ /* Wait for CC to actually start */
+ if (!completion_done(&di->ab8500_fg_started)) {
+ timeout = wait_for_completion_timeout(
+ &di->ab8500_fg_started,
+ INS_CURR_TIMEOUT);
+ dev_dbg(di->dev, "Start time: %d ms\n",
+ jiffies_to_msecs(INS_CURR_TIMEOUT - timeout));
+ if (!timeout) {
+ ret = -ETIME;
+ dev_err(di->dev, "completion timed out [%d]\n",
+ __LINE__);
+ goto fail;
+ }
+ }
+
+ ret = ab8500_fg_inst_curr_finalize(di, &res);
+ if (ret) {
+ dev_err(di->dev, "Failed to finalize fg_inst\n");
+ return 0;
+ }
+
+ dev_dbg(di->dev, "%s instant current: %d", __func__, res);
+ return res;
+fail:
+ disable_irq(di->irq);
+ mutex_unlock(&di->cc_lock);
+ return ret;
+}
+
+/**
+ * ab8500_fg_acc_cur_work() - average battery current
+ * @work: pointer to the work_struct structure
+ *
+ * Updated the average battery current obtained from the
+ * coulomb counter.
+ */
+static void ab8500_fg_acc_cur_work(struct work_struct *work)
+{
+ int val;
+ int ret;
+ u8 low, med, high;
+
+ struct ab8500_fg *di = container_of(work,
+ struct ab8500_fg, fg_acc_cur_work);
+
+ mutex_lock(&di->cc_lock);
+ ret = abx500_set_register_interruptible(di->dev, AB8500_GAS_GAUGE,
+ AB8500_GASG_CC_NCOV_ACCU_CTRL, RD_NCONV_ACCU_REQ);
+ if (ret)
+ goto exit;
+
+ ret = abx500_get_register_interruptible(di->dev, AB8500_GAS_GAUGE,
+ AB8500_GASG_CC_NCOV_ACCU_LOW, &low);
+ if (ret < 0)
+ goto exit;
+
+ ret = abx500_get_register_interruptible(di->dev, AB8500_GAS_GAUGE,
+ AB8500_GASG_CC_NCOV_ACCU_MED, &med);
+ if (ret < 0)
+ goto exit;
+
+ ret = abx500_get_register_interruptible(di->dev, AB8500_GAS_GAUGE,
+ AB8500_GASG_CC_NCOV_ACCU_HIGH, &high);
+ if (ret < 0)
+ goto exit;
+
+ /* Check for sign bit in case of negative value, 2's complement */
+ if (high & 0x10)
+ val = (low | (med << 8) | (high << 16) | 0xFFE00000);
+ else
+ val = (low | (med << 8) | (high << 16));
+
+ /*
+ * Convert to uAh
+ * Given a 250ms conversion cycle time the LSB corresponds
+ * to 112.9 nAh.
+ * 112.9nAh assumes 10mOhm, but fg_res is in 0.1mOhm
+ */
+ di->accu_charge = (val * QLSB_NANO_AMP_HOURS_X10) /
+ (100 * di->bm->fg_res);
+
+ /*
+ * Convert to unit value in mA
+ * by dividing by the conversion
+ * time in hours (= samples / (3600 * 4)h)
+ * and multiply with 1000
+ */
+ di->avg_curr = (val * QLSB_NANO_AMP_HOURS_X10 * 36) /
+ (1000 * di->bm->fg_res * (di->fg_samples / 4));
+
+ di->flags.conv_done = true;
+
+ mutex_unlock(&di->cc_lock);
+
+ queue_work(di->fg_wq, &di->fg_work);
+
+ dev_dbg(di->dev, "fg_res: %d, fg_samples: %d, gasg: %d, accu_charge: %d \n",
+ di->bm->fg_res, di->fg_samples, val, di->accu_charge);
+ return;
+exit:
+ dev_err(di->dev,
+ "Failed to read or write gas gauge registers\n");
+ mutex_unlock(&di->cc_lock);
+ queue_work(di->fg_wq, &di->fg_work);
+}
+
+/**
+ * ab8500_fg_bat_voltage() - get battery voltage
+ * @di: pointer to the ab8500_fg structure
+ *
+ * Returns battery voltage(on success) else error code
+ */
+static int ab8500_fg_bat_voltage(struct ab8500_fg *di)
+{
+ int vbat, ret;
+ static int prev;
+
+ ret = iio_read_channel_processed(di->main_bat_v, &vbat);
+ if (ret < 0) {
+ dev_err(di->dev,
+ "%s ADC conversion failed, using previous value\n",
+ __func__);
+ return prev;
+ }
+
+ prev = vbat;
+ return vbat;
+}
+
+/**
+ * ab8500_fg_volt_to_capacity() - Voltage based capacity
+ * @di: pointer to the ab8500_fg structure
+ * @voltage: The voltage to convert to a capacity
+ *
+ * Returns battery capacity in per mille based on voltage
+ */
+static int ab8500_fg_volt_to_capacity(struct ab8500_fg *di, int voltage)
+{
+ int i, tbl_size;
+ const struct abx500_v_to_cap *tbl;
+ int cap = 0;
+
+ tbl = di->bm->bat_type[di->bm->batt_id].v_to_cap_tbl,
+ tbl_size = di->bm->bat_type[di->bm->batt_id].n_v_cap_tbl_elements;
+
+ for (i = 0; i < tbl_size; ++i) {
+ if (voltage > tbl[i].voltage)
+ break;
+ }
+
+ if ((i > 0) && (i < tbl_size)) {
+ cap = interpolate(voltage,
+ tbl[i].voltage,
+ tbl[i].capacity * 10,
+ tbl[i-1].voltage,
+ tbl[i-1].capacity * 10);
+ } else if (i == 0) {
+ cap = 1000;
+ } else {
+ cap = 0;
+ }
+
+ dev_dbg(di->dev, "%s Vbat: %d, Cap: %d per mille",
+ __func__, voltage, cap);
+
+ return cap;
+}
+
+/**
+ * ab8500_fg_uncomp_volt_to_capacity() - Uncompensated voltage based capacity
+ * @di: pointer to the ab8500_fg structure
+ *
+ * Returns battery capacity based on battery voltage that is not compensated
+ * for the voltage drop due to the load
+ */
+static int ab8500_fg_uncomp_volt_to_capacity(struct ab8500_fg *di)
+{
+ di->vbat = ab8500_fg_bat_voltage(di);
+ return ab8500_fg_volt_to_capacity(di, di->vbat);
+}
+
+/**
+ * ab8500_fg_battery_resistance() - Returns the battery inner resistance
+ * @di: pointer to the ab8500_fg structure
+ *
+ * Returns battery inner resistance added with the fuel gauge resistor value
+ * to get the total resistance in the whole link from gnd to bat+ node.
+ */
+static int ab8500_fg_battery_resistance(struct ab8500_fg *di)
+{
+ int i, tbl_size;
+ const struct batres_vs_temp *tbl;
+ int resist = 0;
+
+ tbl = di->bm->bat_type[di->bm->batt_id].batres_tbl;
+ tbl_size = di->bm->bat_type[di->bm->batt_id].n_batres_tbl_elements;
+
+ for (i = 0; i < tbl_size; ++i) {
+ if (di->bat_temp / 10 > tbl[i].temp)
+ break;
+ }
+
+ if ((i > 0) && (i < tbl_size)) {
+ resist = interpolate(di->bat_temp / 10,
+ tbl[i].temp,
+ tbl[i].resist,
+ tbl[i-1].temp,
+ tbl[i-1].resist);
+ } else if (i == 0) {
+ resist = tbl[0].resist;
+ } else {
+ resist = tbl[tbl_size - 1].resist;
+ }
+
+ dev_dbg(di->dev, "%s Temp: %d battery internal resistance: %d"
+ " fg resistance %d, total: %d (mOhm)\n",
+ __func__, di->bat_temp, resist, di->bm->fg_res / 10,
+ (di->bm->fg_res / 10) + resist);
+
+ /* fg_res variable is in 0.1mOhm */
+ resist += di->bm->fg_res / 10;
+
+ return resist;
+}
+
+/**
+ * ab8500_fg_load_comp_volt_to_capacity() - Load compensated voltage based capacity
+ * @di: pointer to the ab8500_fg structure
+ *
+ * Returns battery capacity based on battery voltage that is load compensated
+ * for the voltage drop
+ */
+static int ab8500_fg_load_comp_volt_to_capacity(struct ab8500_fg *di)
+{
+ int vbat_comp, res;
+ int i = 0;
+ int vbat = 0;
+
+ ab8500_fg_inst_curr_start(di);
+
+ do {
+ vbat += ab8500_fg_bat_voltage(di);
+ i++;
+ usleep_range(5000, 6000);
+ } while (!ab8500_fg_inst_curr_done(di));
+
+ ab8500_fg_inst_curr_finalize(di, &di->inst_curr);
+
+ di->vbat = vbat / i;
+ res = ab8500_fg_battery_resistance(di);
+
+ /* Use Ohms law to get the load compensated voltage */
+ vbat_comp = di->vbat - (di->inst_curr * res) / 1000;
+
+ dev_dbg(di->dev, "%s Measured Vbat: %dmV,Compensated Vbat %dmV, "
+ "R: %dmOhm, Current: %dmA Vbat Samples: %d\n",
+ __func__, di->vbat, vbat_comp, res, di->inst_curr, i);
+
+ return ab8500_fg_volt_to_capacity(di, vbat_comp);
+}
+
+/**
+ * ab8500_fg_convert_mah_to_permille() - Capacity in mAh to permille
+ * @di: pointer to the ab8500_fg structure
+ * @cap_mah: capacity in mAh
+ *
+ * Converts capacity in mAh to capacity in permille
+ */
+static int ab8500_fg_convert_mah_to_permille(struct ab8500_fg *di, int cap_mah)
+{
+ return (cap_mah * 1000) / di->bat_cap.max_mah_design;
+}
+
+/**
+ * ab8500_fg_convert_permille_to_mah() - Capacity in permille to mAh
+ * @di: pointer to the ab8500_fg structure
+ * @cap_pm: capacity in permille
+ *
+ * Converts capacity in permille to capacity in mAh
+ */
+static int ab8500_fg_convert_permille_to_mah(struct ab8500_fg *di, int cap_pm)
+{
+ return cap_pm * di->bat_cap.max_mah_design / 1000;
+}
+
+/**
+ * ab8500_fg_convert_mah_to_uwh() - Capacity in mAh to uWh
+ * @di: pointer to the ab8500_fg structure
+ * @cap_mah: capacity in mAh
+ *
+ * Converts capacity in mAh to capacity in uWh
+ */
+static int ab8500_fg_convert_mah_to_uwh(struct ab8500_fg *di, int cap_mah)
+{
+ u64 div_res;
+ u32 div_rem;
+
+ div_res = ((u64) cap_mah) * ((u64) di->vbat_nom);
+ div_rem = do_div(div_res, 1000);
+
+ /* Make sure to round upwards if necessary */
+ if (div_rem >= 1000 / 2)
+ div_res++;
+
+ return (int) div_res;
+}
+
+/**
+ * ab8500_fg_calc_cap_charging() - Calculate remaining capacity while charging
+ * @di: pointer to the ab8500_fg structure
+ *
+ * Return the capacity in mAh based on previous calculated capcity and the FG
+ * accumulator register value. The filter is filled with this capacity
+ */
+static int ab8500_fg_calc_cap_charging(struct ab8500_fg *di)
+{
+ dev_dbg(di->dev, "%s cap_mah %d accu_charge %d\n",
+ __func__,
+ di->bat_cap.mah,
+ di->accu_charge);
+
+ /* Capacity should not be less than 0 */
+ if (di->bat_cap.mah + di->accu_charge > 0)
+ di->bat_cap.mah += di->accu_charge;
+ else
+ di->bat_cap.mah = 0;
+ /*
+ * We force capacity to 100% once when the algorithm
+ * reports that it's full.
+ */
+ if (di->bat_cap.mah >= di->bat_cap.max_mah_design ||
+ di->flags.force_full) {
+ di->bat_cap.mah = di->bat_cap.max_mah_design;
+ }
+
+ ab8500_fg_fill_cap_sample(di, di->bat_cap.mah);
+ di->bat_cap.permille =
+ ab8500_fg_convert_mah_to_permille(di, di->bat_cap.mah);
+
+ /* We need to update battery voltage and inst current when charging */
+ di->vbat = ab8500_fg_bat_voltage(di);
+ di->inst_curr = ab8500_fg_inst_curr_blocking(di);
+
+ return di->bat_cap.mah;
+}
+
+/**
+ * ab8500_fg_calc_cap_discharge_voltage() - Capacity in discharge with voltage
+ * @di: pointer to the ab8500_fg structure
+ * @comp: if voltage should be load compensated before capacity calc
+ *
+ * Return the capacity in mAh based on the battery voltage. The voltage can
+ * either be load compensated or not. This value is added to the filter and a
+ * new mean value is calculated and returned.
+ */
+static int ab8500_fg_calc_cap_discharge_voltage(struct ab8500_fg *di, bool comp)
+{
+ int permille, mah;
+
+ if (comp)
+ permille = ab8500_fg_load_comp_volt_to_capacity(di);
+ else
+ permille = ab8500_fg_uncomp_volt_to_capacity(di);
+
+ mah = ab8500_fg_convert_permille_to_mah(di, permille);
+
+ di->bat_cap.mah = ab8500_fg_add_cap_sample(di, mah);
+ di->bat_cap.permille =
+ ab8500_fg_convert_mah_to_permille(di, di->bat_cap.mah);
+
+ return di->bat_cap.mah;
+}
+
+/**
+ * ab8500_fg_calc_cap_discharge_fg() - Capacity in discharge with FG
+ * @di: pointer to the ab8500_fg structure
+ *
+ * Return the capacity in mAh based on previous calculated capcity and the FG
+ * accumulator register value. This value is added to the filter and a
+ * new mean value is calculated and returned.
+ */
+static int ab8500_fg_calc_cap_discharge_fg(struct ab8500_fg *di)
+{
+ int permille_volt, permille;
+
+ dev_dbg(di->dev, "%s cap_mah %d accu_charge %d\n",
+ __func__,
+ di->bat_cap.mah,
+ di->accu_charge);
+
+ /* Capacity should not be less than 0 */
+ if (di->bat_cap.mah + di->accu_charge > 0)
+ di->bat_cap.mah += di->accu_charge;
+ else
+ di->bat_cap.mah = 0;
+
+ if (di->bat_cap.mah >= di->bat_cap.max_mah_design)
+ di->bat_cap.mah = di->bat_cap.max_mah_design;
+
+ /*
+ * Check against voltage based capacity. It can not be lower
+ * than what the uncompensated voltage says
+ */
+ permille = ab8500_fg_convert_mah_to_permille(di, di->bat_cap.mah);
+ permille_volt = ab8500_fg_uncomp_volt_to_capacity(di);
+
+ if (permille < permille_volt) {
+ di->bat_cap.permille = permille_volt;
+ di->bat_cap.mah = ab8500_fg_convert_permille_to_mah(di,
+ di->bat_cap.permille);
+
+ dev_dbg(di->dev, "%s voltage based: perm %d perm_volt %d\n",
+ __func__,
+ permille,
+ permille_volt);
+
+ ab8500_fg_fill_cap_sample(di, di->bat_cap.mah);
+ } else {
+ ab8500_fg_fill_cap_sample(di, di->bat_cap.mah);
+ di->bat_cap.permille =
+ ab8500_fg_convert_mah_to_permille(di, di->bat_cap.mah);
+ }
+
+ return di->bat_cap.mah;
+}
+
+/**
+ * ab8500_fg_capacity_level() - Get the battery capacity level
+ * @di: pointer to the ab8500_fg structure
+ *
+ * Get the battery capacity level based on the capacity in percent
+ */
+static int ab8500_fg_capacity_level(struct ab8500_fg *di)
+{
+ int ret, percent;
+
+ percent = DIV_ROUND_CLOSEST(di->bat_cap.permille, 10);
+
+ if (percent <= di->bm->cap_levels->critical ||
+ di->flags.low_bat)
+ ret = POWER_SUPPLY_CAPACITY_LEVEL_CRITICAL;
+ else if (percent <= di->bm->cap_levels->low)
+ ret = POWER_SUPPLY_CAPACITY_LEVEL_LOW;
+ else if (percent <= di->bm->cap_levels->normal)
+ ret = POWER_SUPPLY_CAPACITY_LEVEL_NORMAL;
+ else if (percent <= di->bm->cap_levels->high)
+ ret = POWER_SUPPLY_CAPACITY_LEVEL_HIGH;
+ else
+ ret = POWER_SUPPLY_CAPACITY_LEVEL_FULL;
+
+ return ret;
+}
+
+/**
+ * ab8500_fg_calculate_scaled_capacity() - Capacity scaling
+ * @di: pointer to the ab8500_fg structure
+ *
+ * Calculates the capacity to be shown to upper layers. Scales the capacity
+ * to have 100% as a reference from the actual capacity upon removal of charger
+ * when charging is in maintenance mode.
+ */
+static int ab8500_fg_calculate_scaled_capacity(struct ab8500_fg *di)
+{
+ struct ab8500_fg_cap_scaling *cs = &di->bat_cap.cap_scale;
+ int capacity = di->bat_cap.prev_percent;
+
+ if (!cs->enable)
+ return capacity;
+
+ /*
+ * As long as we are in fully charge mode scale the capacity
+ * to show 100%.
+ */
+ if (di->flags.fully_charged) {
+ cs->cap_to_scale[0] = 100;
+ cs->cap_to_scale[1] =
+ max(capacity, di->bm->fg_params->maint_thres);
+ dev_dbg(di->dev, "Scale cap with %d/%d\n",
+ cs->cap_to_scale[0], cs->cap_to_scale[1]);
+ }
+
+ /* Calculates the scaled capacity. */
+ if ((cs->cap_to_scale[0] != cs->cap_to_scale[1])
+ && (cs->cap_to_scale[1] > 0))
+ capacity = min(100,
+ DIV_ROUND_CLOSEST(di->bat_cap.prev_percent *
+ cs->cap_to_scale[0],
+ cs->cap_to_scale[1]));
+
+ if (di->flags.charging) {
+ if (capacity < cs->disable_cap_level) {
+ cs->disable_cap_level = capacity;
+ dev_dbg(di->dev, "Cap to stop scale lowered %d%%\n",
+ cs->disable_cap_level);
+ } else if (!di->flags.fully_charged) {
+ if (di->bat_cap.prev_percent >=
+ cs->disable_cap_level) {
+ dev_dbg(di->dev, "Disabling scaled capacity\n");
+ cs->enable = false;
+ capacity = di->bat_cap.prev_percent;
+ } else {
+ dev_dbg(di->dev,
+ "Waiting in cap to level %d%%\n",
+ cs->disable_cap_level);
+ capacity = cs->disable_cap_level;
+ }
+ }
+ }
+
+ return capacity;
+}
+
+/**
+ * ab8500_fg_update_cap_scalers() - Capacity scaling
+ * @di: pointer to the ab8500_fg structure
+ *
+ * To be called when state change from charge<->discharge to update
+ * the capacity scalers.
+ */
+static void ab8500_fg_update_cap_scalers(struct ab8500_fg *di)
+{
+ struct ab8500_fg_cap_scaling *cs = &di->bat_cap.cap_scale;
+
+ if (!cs->enable)
+ return;
+ if (di->flags.charging) {
+ di->bat_cap.cap_scale.disable_cap_level =
+ di->bat_cap.cap_scale.scaled_cap;
+ dev_dbg(di->dev, "Cap to stop scale at charge %d%%\n",
+ di->bat_cap.cap_scale.disable_cap_level);
+ } else {
+ if (cs->scaled_cap != 100) {
+ cs->cap_to_scale[0] = cs->scaled_cap;
+ cs->cap_to_scale[1] = di->bat_cap.prev_percent;
+ } else {
+ cs->cap_to_scale[0] = 100;
+ cs->cap_to_scale[1] =
+ max(di->bat_cap.prev_percent,
+ di->bm->fg_params->maint_thres);
+ }
+
+ dev_dbg(di->dev, "Cap to scale at discharge %d/%d\n",
+ cs->cap_to_scale[0], cs->cap_to_scale[1]);
+ }
+}
+
+/**
+ * ab8500_fg_check_capacity_limits() - Check if capacity has changed
+ * @di: pointer to the ab8500_fg structure
+ * @init: capacity is allowed to go up in init mode
+ *
+ * Check if capacity or capacity limit has changed and notify the system
+ * about it using the power_supply framework
+ */
+static void ab8500_fg_check_capacity_limits(struct ab8500_fg *di, bool init)
+{
+ bool changed = false;
+ int percent = DIV_ROUND_CLOSEST(di->bat_cap.permille, 10);
+
+ di->bat_cap.level = ab8500_fg_capacity_level(di);
+
+ if (di->bat_cap.level != di->bat_cap.prev_level) {
+ /*
+ * We do not allow reported capacity level to go up
+ * unless we're charging or if we're in init
+ */
+ if (!(!di->flags.charging && di->bat_cap.level >
+ di->bat_cap.prev_level) || init) {
+ dev_dbg(di->dev, "level changed from %d to %d\n",
+ di->bat_cap.prev_level,
+ di->bat_cap.level);
+ di->bat_cap.prev_level = di->bat_cap.level;
+ changed = true;
+ } else {
+ dev_dbg(di->dev, "level not allowed to go up "
+ "since no charger is connected: %d to %d\n",
+ di->bat_cap.prev_level,
+ di->bat_cap.level);
+ }
+ }
+
+ /*
+ * If we have received the LOW_BAT IRQ, set capacity to 0 to initiate
+ * shutdown
+ */
+ if (di->flags.low_bat) {
+ dev_dbg(di->dev, "Battery low, set capacity to 0\n");
+ di->bat_cap.prev_percent = 0;
+ di->bat_cap.permille = 0;
+ percent = 0;
+ di->bat_cap.prev_mah = 0;
+ di->bat_cap.mah = 0;
+ changed = true;
+ } else if (di->flags.fully_charged) {
+ /*
+ * We report 100% if algorithm reported fully charged
+ * and show 100% during maintenance charging (scaling).
+ */
+ if (di->flags.force_full) {
+ di->bat_cap.prev_percent = percent;
+ di->bat_cap.prev_mah = di->bat_cap.mah;
+
+ changed = true;
+
+ if (!di->bat_cap.cap_scale.enable &&
+ di->bm->capacity_scaling) {
+ di->bat_cap.cap_scale.enable = true;
+ di->bat_cap.cap_scale.cap_to_scale[0] = 100;
+ di->bat_cap.cap_scale.cap_to_scale[1] =
+ di->bat_cap.prev_percent;
+ di->bat_cap.cap_scale.disable_cap_level = 100;
+ }
+ } else if (di->bat_cap.prev_percent != percent) {
+ dev_dbg(di->dev,
+ "battery reported full "
+ "but capacity dropping: %d\n",
+ percent);
+ di->bat_cap.prev_percent = percent;
+ di->bat_cap.prev_mah = di->bat_cap.mah;
+
+ changed = true;
+ }
+ } else if (di->bat_cap.prev_percent != percent) {
+ if (percent == 0) {
+ /*
+ * We will not report 0% unless we've got
+ * the LOW_BAT IRQ, no matter what the FG
+ * algorithm says.
+ */
+ di->bat_cap.prev_percent = 1;
+ percent = 1;
+
+ changed = true;
+ } else if (!(!di->flags.charging &&
+ percent > di->bat_cap.prev_percent) || init) {
+ /*
+ * We do not allow reported capacity to go up
+ * unless we're charging or if we're in init
+ */
+ dev_dbg(di->dev,
+ "capacity changed from %d to %d (%d)\n",
+ di->bat_cap.prev_percent,
+ percent,
+ di->bat_cap.permille);
+ di->bat_cap.prev_percent = percent;
+ di->bat_cap.prev_mah = di->bat_cap.mah;
+
+ changed = true;
+ } else {
+ dev_dbg(di->dev, "capacity not allowed to go up since "
+ "no charger is connected: %d to %d (%d)\n",
+ di->bat_cap.prev_percent,
+ percent,
+ di->bat_cap.permille);
+ }
+ }
+
+ if (changed) {
+ if (di->bm->capacity_scaling) {
+ di->bat_cap.cap_scale.scaled_cap =
+ ab8500_fg_calculate_scaled_capacity(di);
+
+ dev_info(di->dev, "capacity=%d (%d)\n",
+ di->bat_cap.prev_percent,
+ di->bat_cap.cap_scale.scaled_cap);
+ }
+ power_supply_changed(di->fg_psy);
+ if (di->flags.fully_charged && di->flags.force_full) {
+ dev_dbg(di->dev, "Battery full, notifying.\n");
+ di->flags.force_full = false;
+ sysfs_notify(&di->fg_kobject, NULL, "charge_full");
+ }
+ sysfs_notify(&di->fg_kobject, NULL, "charge_now");
+ }
+}
+
+static void ab8500_fg_charge_state_to(struct ab8500_fg *di,
+ enum ab8500_fg_charge_state new_state)
+{
+ dev_dbg(di->dev, "Charge state from %d [%s] to %d [%s]\n",
+ di->charge_state,
+ charge_state[di->charge_state],
+ new_state,
+ charge_state[new_state]);
+
+ di->charge_state = new_state;
+}
+
+static void ab8500_fg_discharge_state_to(struct ab8500_fg *di,
+ enum ab8500_fg_discharge_state new_state)
+{
+ dev_dbg(di->dev, "Discharge state from %d [%s] to %d [%s]\n",
+ di->discharge_state,
+ discharge_state[di->discharge_state],
+ new_state,
+ discharge_state[new_state]);
+
+ di->discharge_state = new_state;
+}
+
+/**
+ * ab8500_fg_algorithm_charging() - FG algorithm for when charging
+ * @di: pointer to the ab8500_fg structure
+ *
+ * Battery capacity calculation state machine for when we're charging
+ */
+static void ab8500_fg_algorithm_charging(struct ab8500_fg *di)
+{
+ /*
+ * If we change to discharge mode
+ * we should start with recovery
+ */
+ if (di->discharge_state != AB8500_FG_DISCHARGE_INIT_RECOVERY)
+ ab8500_fg_discharge_state_to(di,
+ AB8500_FG_DISCHARGE_INIT_RECOVERY);
+
+ switch (di->charge_state) {
+ case AB8500_FG_CHARGE_INIT:
+ di->fg_samples = SEC_TO_SAMPLE(
+ di->bm->fg_params->accu_charging);
+
+ ab8500_fg_coulomb_counter(di, true);
+ ab8500_fg_charge_state_to(di, AB8500_FG_CHARGE_READOUT);
+
+ break;
+
+ case AB8500_FG_CHARGE_READOUT:
+ /*
+ * Read the FG and calculate the new capacity
+ */
+ mutex_lock(&di->cc_lock);
+ if (!di->flags.conv_done && !di->flags.force_full) {
+ /* Wasn't the CC IRQ that got us here */
+ mutex_unlock(&di->cc_lock);
+ dev_dbg(di->dev, "%s CC conv not done\n",
+ __func__);
+
+ break;
+ }
+ di->flags.conv_done = false;
+ mutex_unlock(&di->cc_lock);
+
+ ab8500_fg_calc_cap_charging(di);
+
+ break;
+
+ default:
+ break;
+ }
+
+ /* Check capacity limits */
+ ab8500_fg_check_capacity_limits(di, false);
+}
+
+static void force_capacity(struct ab8500_fg *di)
+{
+ int cap;
+
+ ab8500_fg_clear_cap_samples(di);
+ cap = di->bat_cap.user_mah;
+ if (cap > di->bat_cap.max_mah_design) {
+ dev_dbg(di->dev, "Remaining cap %d can't be bigger than total"
+ " %d\n", cap, di->bat_cap.max_mah_design);
+ cap = di->bat_cap.max_mah_design;
+ }
+ ab8500_fg_fill_cap_sample(di, di->bat_cap.user_mah);
+ di->bat_cap.permille = ab8500_fg_convert_mah_to_permille(di, cap);
+ di->bat_cap.mah = cap;
+ ab8500_fg_check_capacity_limits(di, true);
+}
+
+static bool check_sysfs_capacity(struct ab8500_fg *di)
+{
+ int cap, lower, upper;
+ int cap_permille;
+
+ cap = di->bat_cap.user_mah;
+
+ cap_permille = ab8500_fg_convert_mah_to_permille(di,
+ di->bat_cap.user_mah);
+
+ lower = di->bat_cap.permille - di->bm->fg_params->user_cap_limit * 10;
+ upper = di->bat_cap.permille + di->bm->fg_params->user_cap_limit * 10;
+
+ if (lower < 0)
+ lower = 0;
+ /* 1000 is permille, -> 100 percent */
+ if (upper > 1000)
+ upper = 1000;
+
+ dev_dbg(di->dev, "Capacity limits:"
+ " (Lower: %d User: %d Upper: %d) [user: %d, was: %d]\n",
+ lower, cap_permille, upper, cap, di->bat_cap.mah);
+
+ /* If within limits, use the saved capacity and exit estimation...*/
+ if (cap_permille > lower && cap_permille < upper) {
+ dev_dbg(di->dev, "OK! Using users cap %d uAh now\n", cap);
+ force_capacity(di);
+ return true;
+ }
+ dev_dbg(di->dev, "Capacity from user out of limits, ignoring");
+ return false;
+}
+
+/**
+ * ab8500_fg_algorithm_discharging() - FG algorithm for when discharging
+ * @di: pointer to the ab8500_fg structure
+ *
+ * Battery capacity calculation state machine for when we're discharging
+ */
+static void ab8500_fg_algorithm_discharging(struct ab8500_fg *di)
+{
+ int sleep_time;
+
+ /* If we change to charge mode we should start with init */
+ if (di->charge_state != AB8500_FG_CHARGE_INIT)
+ ab8500_fg_charge_state_to(di, AB8500_FG_CHARGE_INIT);
+
+ switch (di->discharge_state) {
+ case AB8500_FG_DISCHARGE_INIT:
+ /* We use the FG IRQ to work on */
+ di->init_cnt = 0;
+ di->fg_samples = SEC_TO_SAMPLE(di->bm->fg_params->init_timer);
+ ab8500_fg_coulomb_counter(di, true);
+ ab8500_fg_discharge_state_to(di,
+ AB8500_FG_DISCHARGE_INITMEASURING);
+
+ fallthrough;
+ case AB8500_FG_DISCHARGE_INITMEASURING:
+ /*
+ * Discard a number of samples during startup.
+ * After that, use compensated voltage for a few
+ * samples to get an initial capacity.
+ * Then go to READOUT
+ */
+ sleep_time = di->bm->fg_params->init_timer;
+
+ /* Discard the first [x] seconds */
+ if (di->init_cnt > di->bm->fg_params->init_discard_time) {
+ ab8500_fg_calc_cap_discharge_voltage(di, true);
+
+ ab8500_fg_check_capacity_limits(di, true);
+ }
+
+ di->init_cnt += sleep_time;
+ if (di->init_cnt > di->bm->fg_params->init_total_time)
+ ab8500_fg_discharge_state_to(di,
+ AB8500_FG_DISCHARGE_READOUT_INIT);
+
+ break;
+
+ case AB8500_FG_DISCHARGE_INIT_RECOVERY:
+ di->recovery_cnt = 0;
+ di->recovery_needed = true;
+ ab8500_fg_discharge_state_to(di,
+ AB8500_FG_DISCHARGE_RECOVERY);
+
+ fallthrough;
+
+ case AB8500_FG_DISCHARGE_RECOVERY:
+ sleep_time = di->bm->fg_params->recovery_sleep_timer;
+
+ /*
+ * We should check the power consumption
+ * If low, go to READOUT (after x min) or
+ * RECOVERY_SLEEP if time left.
+ * If high, go to READOUT
+ */
+ di->inst_curr = ab8500_fg_inst_curr_blocking(di);
+
+ if (ab8500_fg_is_low_curr(di, di->inst_curr)) {
+ if (di->recovery_cnt >
+ di->bm->fg_params->recovery_total_time) {
+ di->fg_samples = SEC_TO_SAMPLE(
+ di->bm->fg_params->accu_high_curr);
+ ab8500_fg_coulomb_counter(di, true);
+ ab8500_fg_discharge_state_to(di,
+ AB8500_FG_DISCHARGE_READOUT);
+ di->recovery_needed = false;
+ } else {
+ queue_delayed_work(di->fg_wq,
+ &di->fg_periodic_work,
+ sleep_time * HZ);
+ }
+ di->recovery_cnt += sleep_time;
+ } else {
+ di->fg_samples = SEC_TO_SAMPLE(
+ di->bm->fg_params->accu_high_curr);
+ ab8500_fg_coulomb_counter(di, true);
+ ab8500_fg_discharge_state_to(di,
+ AB8500_FG_DISCHARGE_READOUT);
+ }
+ break;
+
+ case AB8500_FG_DISCHARGE_READOUT_INIT:
+ di->fg_samples = SEC_TO_SAMPLE(
+ di->bm->fg_params->accu_high_curr);
+ ab8500_fg_coulomb_counter(di, true);
+ ab8500_fg_discharge_state_to(di,
+ AB8500_FG_DISCHARGE_READOUT);
+ break;
+
+ case AB8500_FG_DISCHARGE_READOUT:
+ di->inst_curr = ab8500_fg_inst_curr_blocking(di);
+
+ if (ab8500_fg_is_low_curr(di, di->inst_curr)) {
+ /* Detect mode change */
+ if (di->high_curr_mode) {
+ di->high_curr_mode = false;
+ di->high_curr_cnt = 0;
+ }
+
+ if (di->recovery_needed) {
+ ab8500_fg_discharge_state_to(di,
+ AB8500_FG_DISCHARGE_INIT_RECOVERY);
+
+ queue_delayed_work(di->fg_wq,
+ &di->fg_periodic_work, 0);
+
+ break;
+ }
+
+ ab8500_fg_calc_cap_discharge_voltage(di, true);
+ } else {
+ mutex_lock(&di->cc_lock);
+ if (!di->flags.conv_done) {
+ /* Wasn't the CC IRQ that got us here */
+ mutex_unlock(&di->cc_lock);
+ dev_dbg(di->dev, "%s CC conv not done\n",
+ __func__);
+
+ break;
+ }
+ di->flags.conv_done = false;
+ mutex_unlock(&di->cc_lock);
+
+ /* Detect mode change */
+ if (!di->high_curr_mode) {
+ di->high_curr_mode = true;
+ di->high_curr_cnt = 0;
+ }
+
+ di->high_curr_cnt +=
+ di->bm->fg_params->accu_high_curr;
+ if (di->high_curr_cnt >
+ di->bm->fg_params->high_curr_time)
+ di->recovery_needed = true;
+
+ ab8500_fg_calc_cap_discharge_fg(di);
+ }
+
+ ab8500_fg_check_capacity_limits(di, false);
+
+ break;
+
+ case AB8500_FG_DISCHARGE_WAKEUP:
+ ab8500_fg_calc_cap_discharge_voltage(di, true);
+
+ di->fg_samples = SEC_TO_SAMPLE(
+ di->bm->fg_params->accu_high_curr);
+ ab8500_fg_coulomb_counter(di, true);
+ ab8500_fg_discharge_state_to(di,
+ AB8500_FG_DISCHARGE_READOUT);
+
+ ab8500_fg_check_capacity_limits(di, false);
+
+ break;
+
+ default:
+ break;
+ }
+}
+
+/**
+ * ab8500_fg_algorithm_calibrate() - Internal columb counter offset calibration
+ * @di: pointer to the ab8500_fg structure
+ *
+ */
+static void ab8500_fg_algorithm_calibrate(struct ab8500_fg *di)
+{
+ int ret;
+
+ switch (di->calib_state) {
+ case AB8500_FG_CALIB_INIT:
+ dev_dbg(di->dev, "Calibration ongoing...\n");
+
+ ret = abx500_mask_and_set_register_interruptible(di->dev,
+ AB8500_GAS_GAUGE, AB8500_GASG_CC_CTRL_REG,
+ CC_INT_CAL_N_AVG_MASK, CC_INT_CAL_SAMPLES_8);
+ if (ret < 0)
+ goto err;
+
+ ret = abx500_mask_and_set_register_interruptible(di->dev,
+ AB8500_GAS_GAUGE, AB8500_GASG_CC_CTRL_REG,
+ CC_INTAVGOFFSET_ENA, CC_INTAVGOFFSET_ENA);
+ if (ret < 0)
+ goto err;
+ di->calib_state = AB8500_FG_CALIB_WAIT;
+ break;
+ case AB8500_FG_CALIB_END:
+ ret = abx500_mask_and_set_register_interruptible(di->dev,
+ AB8500_GAS_GAUGE, AB8500_GASG_CC_CTRL_REG,
+ CC_MUXOFFSET, CC_MUXOFFSET);
+ if (ret < 0)
+ goto err;
+ di->flags.calibrate = false;
+ dev_dbg(di->dev, "Calibration done...\n");
+ queue_delayed_work(di->fg_wq, &di->fg_periodic_work, 0);
+ break;
+ case AB8500_FG_CALIB_WAIT:
+ dev_dbg(di->dev, "Calibration WFI\n");
+ default:
+ break;
+ }
+ return;
+err:
+ /* Something went wrong, don't calibrate then */
+ dev_err(di->dev, "failed to calibrate the CC\n");
+ di->flags.calibrate = false;
+ di->calib_state = AB8500_FG_CALIB_INIT;
+ queue_delayed_work(di->fg_wq, &di->fg_periodic_work, 0);
+}
+
+/**
+ * ab8500_fg_algorithm() - Entry point for the FG algorithm
+ * @di: pointer to the ab8500_fg structure
+ *
+ * Entry point for the battery capacity calculation state machine
+ */
+static void ab8500_fg_algorithm(struct ab8500_fg *di)
+{
+ if (di->flags.calibrate)
+ ab8500_fg_algorithm_calibrate(di);
+ else {
+ if (di->flags.charging)
+ ab8500_fg_algorithm_charging(di);
+ else
+ ab8500_fg_algorithm_discharging(di);
+ }
+
+ dev_dbg(di->dev, "[FG_DATA] %d %d %d %d %d %d %d %d %d %d "
+ "%d %d %d %d %d %d %d\n",
+ di->bat_cap.max_mah_design,
+ di->bat_cap.max_mah,
+ di->bat_cap.mah,
+ di->bat_cap.permille,
+ di->bat_cap.level,
+ di->bat_cap.prev_mah,
+ di->bat_cap.prev_percent,
+ di->bat_cap.prev_level,
+ di->vbat,
+ di->inst_curr,
+ di->avg_curr,
+ di->accu_charge,
+ di->flags.charging,
+ di->charge_state,
+ di->discharge_state,
+ di->high_curr_mode,
+ di->recovery_needed);
+}
+
+/**
+ * ab8500_fg_periodic_work() - Run the FG state machine periodically
+ * @work: pointer to the work_struct structure
+ *
+ * Work queue function for periodic work
+ */
+static void ab8500_fg_periodic_work(struct work_struct *work)
+{
+ struct ab8500_fg *di = container_of(work, struct ab8500_fg,
+ fg_periodic_work.work);
+
+ if (di->init_capacity) {
+ /* Get an initial capacity calculation */
+ ab8500_fg_calc_cap_discharge_voltage(di, true);
+ ab8500_fg_check_capacity_limits(di, true);
+ di->init_capacity = false;
+
+ queue_delayed_work(di->fg_wq, &di->fg_periodic_work, 0);
+ } else if (di->flags.user_cap) {
+ if (check_sysfs_capacity(di)) {
+ ab8500_fg_check_capacity_limits(di, true);
+ if (di->flags.charging)
+ ab8500_fg_charge_state_to(di,
+ AB8500_FG_CHARGE_INIT);
+ else
+ ab8500_fg_discharge_state_to(di,
+ AB8500_FG_DISCHARGE_READOUT_INIT);
+ }
+ di->flags.user_cap = false;
+ queue_delayed_work(di->fg_wq, &di->fg_periodic_work, 0);
+ } else
+ ab8500_fg_algorithm(di);
+
+}
+
+/**
+ * ab8500_fg_check_hw_failure_work() - Check OVV_BAT condition
+ * @work: pointer to the work_struct structure
+ *
+ * Work queue function for checking the OVV_BAT condition
+ */
+static void ab8500_fg_check_hw_failure_work(struct work_struct *work)
+{
+ int ret;
+ u8 reg_value;
+
+ struct ab8500_fg *di = container_of(work, struct ab8500_fg,
+ fg_check_hw_failure_work.work);
+
+ /*
+ * If we have had a battery over-voltage situation,
+ * check ovv-bit to see if it should be reset.
+ */
+ ret = abx500_get_register_interruptible(di->dev,
+ AB8500_CHARGER, AB8500_CH_STAT_REG,
+ &reg_value);
+ if (ret < 0) {
+ dev_err(di->dev, "%s ab8500 read failed\n", __func__);
+ return;
+ }
+ if ((reg_value & BATT_OVV) == BATT_OVV) {
+ if (!di->flags.bat_ovv) {
+ dev_dbg(di->dev, "Battery OVV\n");
+ di->flags.bat_ovv = true;
+ power_supply_changed(di->fg_psy);
+ }
+ /* Not yet recovered from ovv, reschedule this test */
+ queue_delayed_work(di->fg_wq, &di->fg_check_hw_failure_work,
+ HZ);
+ } else {
+ dev_dbg(di->dev, "Battery recovered from OVV\n");
+ di->flags.bat_ovv = false;
+ power_supply_changed(di->fg_psy);
+ }
+}
+
+/**
+ * ab8500_fg_low_bat_work() - Check LOW_BAT condition
+ * @work: pointer to the work_struct structure
+ *
+ * Work queue function for checking the LOW_BAT condition
+ */
+static void ab8500_fg_low_bat_work(struct work_struct *work)
+{
+ int vbat;
+
+ struct ab8500_fg *di = container_of(work, struct ab8500_fg,
+ fg_low_bat_work.work);
+
+ vbat = ab8500_fg_bat_voltage(di);
+
+ /* Check if LOW_BAT still fulfilled */
+ if (vbat < di->bm->fg_params->lowbat_threshold) {
+ /* Is it time to shut down? */
+ if (di->low_bat_cnt < 1) {
+ di->flags.low_bat = true;
+ dev_warn(di->dev, "Shut down pending...\n");
+ } else {
+ /*
+ * Else we need to re-schedule this check to be able to detect
+ * if the voltage increases again during charging or
+ * due to decreasing load.
+ */
+ di->low_bat_cnt--;
+ dev_warn(di->dev, "Battery voltage still LOW\n");
+ queue_delayed_work(di->fg_wq, &di->fg_low_bat_work,
+ round_jiffies(LOW_BAT_CHECK_INTERVAL));
+ }
+ } else {
+ di->flags.low_bat_delay = false;
+ di->low_bat_cnt = 10;
+ dev_warn(di->dev, "Battery voltage OK again\n");
+ }
+
+ /* This is needed to dispatch LOW_BAT */
+ ab8500_fg_check_capacity_limits(di, false);
+}
+
+/**
+ * ab8500_fg_battok_calc - calculate the bit pattern corresponding
+ * to the target voltage.
+ * @di: pointer to the ab8500_fg structure
+ * @target: target voltage
+ *
+ * Returns bit pattern closest to the target voltage
+ * valid return values are 0-14. (0-BATT_OK_MAX_NR_INCREMENTS)
+ */
+
+static int ab8500_fg_battok_calc(struct ab8500_fg *di, int target)
+{
+ if (target > BATT_OK_MIN +
+ (BATT_OK_INCREMENT * BATT_OK_MAX_NR_INCREMENTS))
+ return BATT_OK_MAX_NR_INCREMENTS;
+ if (target < BATT_OK_MIN)
+ return 0;
+ return (target - BATT_OK_MIN) / BATT_OK_INCREMENT;
+}
+
+/**
+ * ab8500_fg_battok_init_hw_register - init battok levels
+ * @di: pointer to the ab8500_fg structure
+ *
+ */
+
+static int ab8500_fg_battok_init_hw_register(struct ab8500_fg *di)
+{
+ int selected;
+ int sel0;
+ int sel1;
+ int cbp_sel0;
+ int cbp_sel1;
+ int ret;
+ int new_val;
+
+ sel0 = di->bm->fg_params->battok_falling_th_sel0;
+ sel1 = di->bm->fg_params->battok_raising_th_sel1;
+
+ cbp_sel0 = ab8500_fg_battok_calc(di, sel0);
+ cbp_sel1 = ab8500_fg_battok_calc(di, sel1);
+
+ selected = BATT_OK_MIN + cbp_sel0 * BATT_OK_INCREMENT;
+
+ if (selected != sel0)
+ dev_warn(di->dev, "Invalid voltage step:%d, using %d %d\n",
+ sel0, selected, cbp_sel0);
+
+ selected = BATT_OK_MIN + cbp_sel1 * BATT_OK_INCREMENT;
+
+ if (selected != sel1)
+ dev_warn(di->dev, "Invalid voltage step:%d, using %d %d\n",
+ sel1, selected, cbp_sel1);
+
+ new_val = cbp_sel0 | (cbp_sel1 << 4);
+
+ dev_dbg(di->dev, "using: %x %d %d\n", new_val, cbp_sel0, cbp_sel1);
+ ret = abx500_set_register_interruptible(di->dev, AB8500_SYS_CTRL2_BLOCK,
+ AB8500_BATT_OK_REG, new_val);
+ return ret;
+}
+
+/**
+ * ab8500_fg_instant_work() - Run the FG state machine instantly
+ * @work: pointer to the work_struct structure
+ *
+ * Work queue function for instant work
+ */
+static void ab8500_fg_instant_work(struct work_struct *work)
+{
+ struct ab8500_fg *di = container_of(work, struct ab8500_fg, fg_work);
+
+ ab8500_fg_algorithm(di);
+}
+
+/**
+ * ab8500_fg_cc_data_end_handler() - end of data conversion isr.
+ * @irq: interrupt number
+ * @_di: pointer to the ab8500_fg structure
+ *
+ * Returns IRQ status(IRQ_HANDLED)
+ */
+static irqreturn_t ab8500_fg_cc_data_end_handler(int irq, void *_di)
+{
+ struct ab8500_fg *di = _di;
+ if (!di->nbr_cceoc_irq_cnt) {
+ di->nbr_cceoc_irq_cnt++;
+ complete(&di->ab8500_fg_started);
+ } else {
+ di->nbr_cceoc_irq_cnt = 0;
+ complete(&di->ab8500_fg_complete);
+ }
+ return IRQ_HANDLED;
+}
+
+/**
+ * ab8500_fg_cc_int_calib_handler () - end of calibration isr.
+ * @irq: interrupt number
+ * @_di: pointer to the ab8500_fg structure
+ *
+ * Returns IRQ status(IRQ_HANDLED)
+ */
+static irqreturn_t ab8500_fg_cc_int_calib_handler(int irq, void *_di)
+{
+ struct ab8500_fg *di = _di;
+ di->calib_state = AB8500_FG_CALIB_END;
+ queue_delayed_work(di->fg_wq, &di->fg_periodic_work, 0);
+ return IRQ_HANDLED;
+}
+
+/**
+ * ab8500_fg_cc_convend_handler() - isr to get battery avg current.
+ * @irq: interrupt number
+ * @_di: pointer to the ab8500_fg structure
+ *
+ * Returns IRQ status(IRQ_HANDLED)
+ */
+static irqreturn_t ab8500_fg_cc_convend_handler(int irq, void *_di)
+{
+ struct ab8500_fg *di = _di;
+
+ queue_work(di->fg_wq, &di->fg_acc_cur_work);
+
+ return IRQ_HANDLED;
+}
+
+/**
+ * ab8500_fg_batt_ovv_handler() - Battery OVV occured
+ * @irq: interrupt number
+ * @_di: pointer to the ab8500_fg structure
+ *
+ * Returns IRQ status(IRQ_HANDLED)
+ */
+static irqreturn_t ab8500_fg_batt_ovv_handler(int irq, void *_di)
+{
+ struct ab8500_fg *di = _di;
+
+ dev_dbg(di->dev, "Battery OVV\n");
+
+ /* Schedule a new HW failure check */
+ queue_delayed_work(di->fg_wq, &di->fg_check_hw_failure_work, 0);
+
+ return IRQ_HANDLED;
+}
+
+/**
+ * ab8500_fg_lowbatf_handler() - Battery voltage is below LOW threshold
+ * @irq: interrupt number
+ * @_di: pointer to the ab8500_fg structure
+ *
+ * Returns IRQ status(IRQ_HANDLED)
+ */
+static irqreturn_t ab8500_fg_lowbatf_handler(int irq, void *_di)
+{
+ struct ab8500_fg *di = _di;
+
+ /* Initiate handling in ab8500_fg_low_bat_work() if not already initiated. */
+ if (!di->flags.low_bat_delay) {
+ dev_warn(di->dev, "Battery voltage is below LOW threshold\n");
+ di->flags.low_bat_delay = true;
+ /*
+ * Start a timer to check LOW_BAT again after some time
+ * This is done to avoid shutdown on single voltage dips
+ */
+ queue_delayed_work(di->fg_wq, &di->fg_low_bat_work,
+ round_jiffies(LOW_BAT_CHECK_INTERVAL));
+ }
+ return IRQ_HANDLED;
+}
+
+/**
+ * ab8500_fg_get_property() - get the fg properties
+ * @psy: pointer to the power_supply structure
+ * @psp: pointer to the power_supply_property structure
+ * @val: pointer to the power_supply_propval union
+ *
+ * This function gets called when an application tries to get the
+ * fg properties by reading the sysfs files.
+ * voltage_now: battery voltage
+ * current_now: battery instant current
+ * current_avg: battery average current
+ * charge_full_design: capacity where battery is considered full
+ * charge_now: battery capacity in nAh
+ * capacity: capacity in percent
+ * capacity_level: capacity level
+ *
+ * Returns error code in case of failure else 0 on success
+ */
+static int ab8500_fg_get_property(struct power_supply *psy,
+ enum power_supply_property psp,
+ union power_supply_propval *val)
+{
+ struct ab8500_fg *di = power_supply_get_drvdata(psy);
+
+ /*
+ * If battery is identified as unknown and charging of unknown
+ * batteries is disabled, we always report 100% capacity and
+ * capacity level UNKNOWN, since we can't calculate
+ * remaining capacity
+ */
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+ if (di->flags.bat_ovv)
+ val->intval = BATT_OVV_VALUE * 1000;
+ else
+ val->intval = di->vbat * 1000;
+ break;
+ case POWER_SUPPLY_PROP_CURRENT_NOW:
+ val->intval = di->inst_curr * 1000;
+ break;
+ case POWER_SUPPLY_PROP_CURRENT_AVG:
+ val->intval = di->avg_curr * 1000;
+ break;
+ case POWER_SUPPLY_PROP_ENERGY_FULL_DESIGN:
+ val->intval = ab8500_fg_convert_mah_to_uwh(di,
+ di->bat_cap.max_mah_design);
+ break;
+ case POWER_SUPPLY_PROP_ENERGY_FULL:
+ val->intval = ab8500_fg_convert_mah_to_uwh(di,
+ di->bat_cap.max_mah);
+ break;
+ case POWER_SUPPLY_PROP_ENERGY_NOW:
+ if (di->flags.batt_unknown && !di->bm->chg_unknown_bat &&
+ di->flags.batt_id_received)
+ val->intval = ab8500_fg_convert_mah_to_uwh(di,
+ di->bat_cap.max_mah);
+ else
+ val->intval = ab8500_fg_convert_mah_to_uwh(di,
+ di->bat_cap.prev_mah);
+ break;
+ case POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN:
+ val->intval = di->bat_cap.max_mah_design;
+ break;
+ case POWER_SUPPLY_PROP_CHARGE_FULL:
+ val->intval = di->bat_cap.max_mah;
+ break;
+ case POWER_SUPPLY_PROP_CHARGE_NOW:
+ if (di->flags.batt_unknown && !di->bm->chg_unknown_bat &&
+ di->flags.batt_id_received)
+ val->intval = di->bat_cap.max_mah;
+ else
+ val->intval = di->bat_cap.prev_mah;
+ break;
+ case POWER_SUPPLY_PROP_CAPACITY:
+ if (di->flags.batt_unknown && !di->bm->chg_unknown_bat &&
+ di->flags.batt_id_received)
+ val->intval = 100;
+ else
+ val->intval = di->bat_cap.prev_percent;
+ break;
+ case POWER_SUPPLY_PROP_CAPACITY_LEVEL:
+ if (di->flags.batt_unknown && !di->bm->chg_unknown_bat &&
+ di->flags.batt_id_received)
+ val->intval = POWER_SUPPLY_CAPACITY_LEVEL_UNKNOWN;
+ else
+ val->intval = di->bat_cap.prev_level;
+ break;
+ default:
+ return -EINVAL;
+ }
+ return 0;
+}
+
+static int ab8500_fg_get_ext_psy_data(struct device *dev, void *data)
+{
+ struct power_supply *psy;
+ struct power_supply *ext = dev_get_drvdata(dev);
+ const char **supplicants = (const char **)ext->supplied_to;
+ struct ab8500_fg *di;
+ union power_supply_propval ret;
+ int j;
+
+ psy = (struct power_supply *)data;
+ di = power_supply_get_drvdata(psy);
+
+ /*
+ * For all psy where the name of your driver
+ * appears in any supplied_to
+ */
+ j = match_string(supplicants, ext->num_supplicants, psy->desc->name);
+ if (j < 0)
+ return 0;
+
+ /* Go through all properties for the psy */
+ for (j = 0; j < ext->desc->num_properties; j++) {
+ enum power_supply_property prop;
+ prop = ext->desc->properties[j];
+
+ if (power_supply_get_property(ext, prop, &ret))
+ continue;
+
+ switch (prop) {
+ case POWER_SUPPLY_PROP_STATUS:
+ switch (ext->desc->type) {
+ case POWER_SUPPLY_TYPE_BATTERY:
+ switch (ret.intval) {
+ case POWER_SUPPLY_STATUS_UNKNOWN:
+ case POWER_SUPPLY_STATUS_DISCHARGING:
+ case POWER_SUPPLY_STATUS_NOT_CHARGING:
+ if (!di->flags.charging)
+ break;
+ di->flags.charging = false;
+ di->flags.fully_charged = false;
+ if (di->bm->capacity_scaling)
+ ab8500_fg_update_cap_scalers(di);
+ queue_work(di->fg_wq, &di->fg_work);
+ break;
+ case POWER_SUPPLY_STATUS_FULL:
+ if (di->flags.fully_charged)
+ break;
+ di->flags.fully_charged = true;
+ di->flags.force_full = true;
+ /* Save current capacity as maximum */
+ di->bat_cap.max_mah = di->bat_cap.mah;
+ queue_work(di->fg_wq, &di->fg_work);
+ break;
+ case POWER_SUPPLY_STATUS_CHARGING:
+ if (di->flags.charging &&
+ !di->flags.fully_charged)
+ break;
+ di->flags.charging = true;
+ di->flags.fully_charged = false;
+ if (di->bm->capacity_scaling)
+ ab8500_fg_update_cap_scalers(di);
+ queue_work(di->fg_wq, &di->fg_work);
+ break;
+ }
+ default:
+ break;
+ }
+ break;
+ case POWER_SUPPLY_PROP_TECHNOLOGY:
+ switch (ext->desc->type) {
+ case POWER_SUPPLY_TYPE_BATTERY:
+ if (!di->flags.batt_id_received &&
+ di->bm->batt_id != BATTERY_UNKNOWN) {
+ const struct abx500_battery_type *b;
+
+ b = &(di->bm->bat_type[di->bm->batt_id]);
+
+ di->flags.batt_id_received = true;
+
+ di->bat_cap.max_mah_design =
+ MILLI_TO_MICRO *
+ b->charge_full_design;
+
+ di->bat_cap.max_mah =
+ di->bat_cap.max_mah_design;
+
+ di->vbat_nom = b->nominal_voltage;
+ }
+
+ if (ret.intval)
+ di->flags.batt_unknown = false;
+ else
+ di->flags.batt_unknown = true;
+ break;
+ default:
+ break;
+ }
+ break;
+ case POWER_SUPPLY_PROP_TEMP:
+ switch (ext->desc->type) {
+ case POWER_SUPPLY_TYPE_BATTERY:
+ if (di->flags.batt_id_received)
+ di->bat_temp = ret.intval;
+ break;
+ default:
+ break;
+ }
+ break;
+ default:
+ break;
+ }
+ }
+ return 0;
+}
+
+/**
+ * ab8500_fg_init_hw_registers() - Set up FG related registers
+ * @di: pointer to the ab8500_fg structure
+ *
+ * Set up battery OVV, low battery voltage registers
+ */
+static int ab8500_fg_init_hw_registers(struct ab8500_fg *di)
+{
+ int ret;
+
+ /* Set VBAT OVV threshold */
+ ret = abx500_mask_and_set_register_interruptible(di->dev,
+ AB8500_CHARGER,
+ AB8500_BATT_OVV,
+ BATT_OVV_TH_4P75,
+ BATT_OVV_TH_4P75);
+ if (ret) {
+ dev_err(di->dev, "failed to set BATT_OVV\n");
+ goto out;
+ }
+
+ /* Enable VBAT OVV detection */
+ ret = abx500_mask_and_set_register_interruptible(di->dev,
+ AB8500_CHARGER,
+ AB8500_BATT_OVV,
+ BATT_OVV_ENA,
+ BATT_OVV_ENA);
+ if (ret) {
+ dev_err(di->dev, "failed to enable BATT_OVV\n");
+ goto out;
+ }
+
+ /* Low Battery Voltage */
+ ret = abx500_set_register_interruptible(di->dev,
+ AB8500_SYS_CTRL2_BLOCK,
+ AB8500_LOW_BAT_REG,
+ ab8500_volt_to_regval(
+ di->bm->fg_params->lowbat_threshold) << 1 |
+ LOW_BAT_ENABLE);
+ if (ret) {
+ dev_err(di->dev, "%s write failed\n", __func__);
+ goto out;
+ }
+
+ /* Battery OK threshold */
+ ret = ab8500_fg_battok_init_hw_register(di);
+ if (ret) {
+ dev_err(di->dev, "BattOk init write failed.\n");
+ goto out;
+ }
+
+ if (is_ab8505(di->parent)) {
+ ret = abx500_set_register_interruptible(di->dev, AB8500_RTC,
+ AB8505_RTC_PCUT_MAX_TIME_REG, di->bm->fg_params->pcut_max_time);
+
+ if (ret) {
+ dev_err(di->dev, "%s write failed AB8505_RTC_PCUT_MAX_TIME_REG\n", __func__);
+ goto out;
+ }
+
+ ret = abx500_set_register_interruptible(di->dev, AB8500_RTC,
+ AB8505_RTC_PCUT_FLAG_TIME_REG, di->bm->fg_params->pcut_flag_time);
+
+ if (ret) {
+ dev_err(di->dev, "%s write failed AB8505_RTC_PCUT_FLAG_TIME_REG\n", __func__);
+ goto out;
+ }
+
+ ret = abx500_set_register_interruptible(di->dev, AB8500_RTC,
+ AB8505_RTC_PCUT_RESTART_REG, di->bm->fg_params->pcut_max_restart);
+
+ if (ret) {
+ dev_err(di->dev, "%s write failed AB8505_RTC_PCUT_RESTART_REG\n", __func__);
+ goto out;
+ }
+
+ ret = abx500_set_register_interruptible(di->dev, AB8500_RTC,
+ AB8505_RTC_PCUT_DEBOUNCE_REG, di->bm->fg_params->pcut_debounce_time);
+
+ if (ret) {
+ dev_err(di->dev, "%s write failed AB8505_RTC_PCUT_DEBOUNCE_REG\n", __func__);
+ goto out;
+ }
+
+ ret = abx500_set_register_interruptible(di->dev, AB8500_RTC,
+ AB8505_RTC_PCUT_CTL_STATUS_REG, di->bm->fg_params->pcut_enable);
+
+ if (ret) {
+ dev_err(di->dev, "%s write failed AB8505_RTC_PCUT_CTL_STATUS_REG\n", __func__);
+ goto out;
+ }
+ }
+out:
+ return ret;
+}
+
+/**
+ * ab8500_fg_external_power_changed() - callback for power supply changes
+ * @psy: pointer to the structure power_supply
+ *
+ * This function is the entry point of the pointer external_power_changed
+ * of the structure power_supply.
+ * This function gets executed when there is a change in any external power
+ * supply that this driver needs to be notified of.
+ */
+static void ab8500_fg_external_power_changed(struct power_supply *psy)
+{
+ class_for_each_device(power_supply_class, NULL, psy,
+ ab8500_fg_get_ext_psy_data);
+}
+
+/**
+ * ab8500_fg_reinit_work() - work to reset the FG algorithm
+ * @work: pointer to the work_struct structure
+ *
+ * Used to reset the current battery capacity to be able to
+ * retrigger a new voltage base capacity calculation. For
+ * test and verification purpose.
+ */
+static void ab8500_fg_reinit_work(struct work_struct *work)
+{
+ struct ab8500_fg *di = container_of(work, struct ab8500_fg,
+ fg_reinit_work.work);
+
+ if (!di->flags.calibrate) {
+ dev_dbg(di->dev, "Resetting FG state machine to init.\n");
+ ab8500_fg_clear_cap_samples(di);
+ ab8500_fg_calc_cap_discharge_voltage(di, true);
+ ab8500_fg_charge_state_to(di, AB8500_FG_CHARGE_INIT);
+ ab8500_fg_discharge_state_to(di, AB8500_FG_DISCHARGE_INIT);
+ queue_delayed_work(di->fg_wq, &di->fg_periodic_work, 0);
+
+ } else {
+ dev_err(di->dev, "Residual offset calibration ongoing "
+ "retrying..\n");
+ /* Wait one second until next try*/
+ queue_delayed_work(di->fg_wq, &di->fg_reinit_work,
+ round_jiffies(1));
+ }
+}
+
+/* Exposure to the sysfs interface */
+
+struct ab8500_fg_sysfs_entry {
+ struct attribute attr;
+ ssize_t (*show)(struct ab8500_fg *, char *);
+ ssize_t (*store)(struct ab8500_fg *, const char *, size_t);
+};
+
+static ssize_t charge_full_show(struct ab8500_fg *di, char *buf)
+{
+ return sprintf(buf, "%d\n", di->bat_cap.max_mah);
+}
+
+static ssize_t charge_full_store(struct ab8500_fg *di, const char *buf,
+ size_t count)
+{
+ unsigned long charge_full;
+ int ret;
+
+ ret = kstrtoul(buf, 10, &charge_full);
+ if (ret)
+ return ret;
+
+ di->bat_cap.max_mah = (int) charge_full;
+ return count;
+}
+
+static ssize_t charge_now_show(struct ab8500_fg *di, char *buf)
+{
+ return sprintf(buf, "%d\n", di->bat_cap.prev_mah);
+}
+
+static ssize_t charge_now_store(struct ab8500_fg *di, const char *buf,
+ size_t count)
+{
+ unsigned long charge_now;
+ int ret;
+
+ ret = kstrtoul(buf, 10, &charge_now);
+ if (ret)
+ return ret;
+
+ di->bat_cap.user_mah = (int) charge_now;
+ di->flags.user_cap = true;
+ queue_delayed_work(di->fg_wq, &di->fg_periodic_work, 0);
+ return count;
+}
+
+static struct ab8500_fg_sysfs_entry charge_full_attr =
+ __ATTR(charge_full, 0644, charge_full_show, charge_full_store);
+
+static struct ab8500_fg_sysfs_entry charge_now_attr =
+ __ATTR(charge_now, 0644, charge_now_show, charge_now_store);
+
+static ssize_t
+ab8500_fg_show(struct kobject *kobj, struct attribute *attr, char *buf)
+{
+ struct ab8500_fg_sysfs_entry *entry;
+ struct ab8500_fg *di;
+
+ entry = container_of(attr, struct ab8500_fg_sysfs_entry, attr);
+ di = container_of(kobj, struct ab8500_fg, fg_kobject);
+
+ if (!entry->show)
+ return -EIO;
+
+ return entry->show(di, buf);
+}
+static ssize_t
+ab8500_fg_store(struct kobject *kobj, struct attribute *attr, const char *buf,
+ size_t count)
+{
+ struct ab8500_fg_sysfs_entry *entry;
+ struct ab8500_fg *di;
+
+ entry = container_of(attr, struct ab8500_fg_sysfs_entry, attr);
+ di = container_of(kobj, struct ab8500_fg, fg_kobject);
+
+ if (!entry->store)
+ return -EIO;
+
+ return entry->store(di, buf, count);
+}
+
+static const struct sysfs_ops ab8500_fg_sysfs_ops = {
+ .show = ab8500_fg_show,
+ .store = ab8500_fg_store,
+};
+
+static struct attribute *ab8500_fg_attrs[] = {
+ &charge_full_attr.attr,
+ &charge_now_attr.attr,
+ NULL,
+};
+
+static struct kobj_type ab8500_fg_ktype = {
+ .sysfs_ops = &ab8500_fg_sysfs_ops,
+ .default_attrs = ab8500_fg_attrs,
+};
+
+/**
+ * ab8500_fg_sysfs_exit() - de-init of sysfs entry
+ * @di: pointer to the struct ab8500_chargalg
+ *
+ * This function removes the entry in sysfs.
+ */
+static void ab8500_fg_sysfs_exit(struct ab8500_fg *di)
+{
+ kobject_del(&di->fg_kobject);
+}
+
+/**
+ * ab8500_fg_sysfs_init() - init of sysfs entry
+ * @di: pointer to the struct ab8500_chargalg
+ *
+ * This function adds an entry in sysfs.
+ * Returns error code in case of failure else 0(on success)
+ */
+static int ab8500_fg_sysfs_init(struct ab8500_fg *di)
+{
+ int ret = 0;
+
+ ret = kobject_init_and_add(&di->fg_kobject,
+ &ab8500_fg_ktype,
+ NULL, "battery");
+ if (ret < 0) {
+ kobject_put(&di->fg_kobject);
+ dev_err(di->dev, "failed to create sysfs entry\n");
+ }
+
+ return ret;
+}
+
+static ssize_t ab8505_powercut_flagtime_read(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ int ret;
+ u8 reg_value;
+ struct power_supply *psy = dev_get_drvdata(dev);
+ struct ab8500_fg *di = power_supply_get_drvdata(psy);
+
+ ret = abx500_get_register_interruptible(di->dev, AB8500_RTC,
+ AB8505_RTC_PCUT_FLAG_TIME_REG, &reg_value);
+
+ if (ret < 0) {
+ dev_err(dev, "Failed to read AB8505_RTC_PCUT_FLAG_TIME_REG\n");
+ goto fail;
+ }
+
+ return scnprintf(buf, PAGE_SIZE, "%d\n", (reg_value & 0x7F));
+
+fail:
+ return ret;
+}
+
+static ssize_t ab8505_powercut_flagtime_write(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ int ret;
+ int reg_value;
+ struct power_supply *psy = dev_get_drvdata(dev);
+ struct ab8500_fg *di = power_supply_get_drvdata(psy);
+
+ if (kstrtoint(buf, 10, &reg_value))
+ goto fail;
+
+ if (reg_value > 0x7F) {
+ dev_err(dev, "Incorrect parameter, echo 0 (1.98s) - 127 (15.625ms) for flagtime\n");
+ goto fail;
+ }
+
+ ret = abx500_set_register_interruptible(di->dev, AB8500_RTC,
+ AB8505_RTC_PCUT_FLAG_TIME_REG, (u8)reg_value);
+
+ if (ret < 0)
+ dev_err(dev, "Failed to set AB8505_RTC_PCUT_FLAG_TIME_REG\n");
+
+fail:
+ return count;
+}
+
+static ssize_t ab8505_powercut_maxtime_read(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ int ret;
+ u8 reg_value;
+ struct power_supply *psy = dev_get_drvdata(dev);
+ struct ab8500_fg *di = power_supply_get_drvdata(psy);
+
+ ret = abx500_get_register_interruptible(di->dev, AB8500_RTC,
+ AB8505_RTC_PCUT_MAX_TIME_REG, &reg_value);
+
+ if (ret < 0) {
+ dev_err(dev, "Failed to read AB8505_RTC_PCUT_MAX_TIME_REG\n");
+ goto fail;
+ }
+
+ return scnprintf(buf, PAGE_SIZE, "%d\n", (reg_value & 0x7F));
+
+fail:
+ return ret;
+
+}
+
+static ssize_t ab8505_powercut_maxtime_write(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ int ret;
+ int reg_value;
+ struct power_supply *psy = dev_get_drvdata(dev);
+ struct ab8500_fg *di = power_supply_get_drvdata(psy);
+
+ if (kstrtoint(buf, 10, &reg_value))
+ goto fail;
+
+ if (reg_value > 0x7F) {
+ dev_err(dev, "Incorrect parameter, echo 0 (0.0s) - 127 (1.98s) for maxtime\n");
+ goto fail;
+ }
+
+ ret = abx500_set_register_interruptible(di->dev, AB8500_RTC,
+ AB8505_RTC_PCUT_MAX_TIME_REG, (u8)reg_value);
+
+ if (ret < 0)
+ dev_err(dev, "Failed to set AB8505_RTC_PCUT_MAX_TIME_REG\n");
+
+fail:
+ return count;
+}
+
+static ssize_t ab8505_powercut_restart_read(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ int ret;
+ u8 reg_value;
+ struct power_supply *psy = dev_get_drvdata(dev);
+ struct ab8500_fg *di = power_supply_get_drvdata(psy);
+
+ ret = abx500_get_register_interruptible(di->dev, AB8500_RTC,
+ AB8505_RTC_PCUT_RESTART_REG, &reg_value);
+
+ if (ret < 0) {
+ dev_err(dev, "Failed to read AB8505_RTC_PCUT_RESTART_REG\n");
+ goto fail;
+ }
+
+ return scnprintf(buf, PAGE_SIZE, "%d\n", (reg_value & 0xF));
+
+fail:
+ return ret;
+}
+
+static ssize_t ab8505_powercut_restart_write(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ int ret;
+ int reg_value;
+ struct power_supply *psy = dev_get_drvdata(dev);
+ struct ab8500_fg *di = power_supply_get_drvdata(psy);
+
+ if (kstrtoint(buf, 10, &reg_value))
+ goto fail;
+
+ if (reg_value > 0xF) {
+ dev_err(dev, "Incorrect parameter, echo 0 - 15 for number of restart\n");
+ goto fail;
+ }
+
+ ret = abx500_set_register_interruptible(di->dev, AB8500_RTC,
+ AB8505_RTC_PCUT_RESTART_REG, (u8)reg_value);
+
+ if (ret < 0)
+ dev_err(dev, "Failed to set AB8505_RTC_PCUT_RESTART_REG\n");
+
+fail:
+ return count;
+
+}
+
+static ssize_t ab8505_powercut_timer_read(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ int ret;
+ u8 reg_value;
+ struct power_supply *psy = dev_get_drvdata(dev);
+ struct ab8500_fg *di = power_supply_get_drvdata(psy);
+
+ ret = abx500_get_register_interruptible(di->dev, AB8500_RTC,
+ AB8505_RTC_PCUT_TIME_REG, &reg_value);
+
+ if (ret < 0) {
+ dev_err(dev, "Failed to read AB8505_RTC_PCUT_TIME_REG\n");
+ goto fail;
+ }
+
+ return scnprintf(buf, PAGE_SIZE, "%d\n", (reg_value & 0x7F));
+
+fail:
+ return ret;
+}
+
+static ssize_t ab8505_powercut_restart_counter_read(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ int ret;
+ u8 reg_value;
+ struct power_supply *psy = dev_get_drvdata(dev);
+ struct ab8500_fg *di = power_supply_get_drvdata(psy);
+
+ ret = abx500_get_register_interruptible(di->dev, AB8500_RTC,
+ AB8505_RTC_PCUT_RESTART_REG, &reg_value);
+
+ if (ret < 0) {
+ dev_err(dev, "Failed to read AB8505_RTC_PCUT_RESTART_REG\n");
+ goto fail;
+ }
+
+ return scnprintf(buf, PAGE_SIZE, "%d\n", (reg_value & 0xF0) >> 4);
+
+fail:
+ return ret;
+}
+
+static ssize_t ab8505_powercut_read(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ int ret;
+ u8 reg_value;
+ struct power_supply *psy = dev_get_drvdata(dev);
+ struct ab8500_fg *di = power_supply_get_drvdata(psy);
+
+ ret = abx500_get_register_interruptible(di->dev, AB8500_RTC,
+ AB8505_RTC_PCUT_CTL_STATUS_REG, &reg_value);
+
+ if (ret < 0)
+ goto fail;
+
+ return scnprintf(buf, PAGE_SIZE, "%d\n", (reg_value & 0x1));
+
+fail:
+ return ret;
+}
+
+static ssize_t ab8505_powercut_write(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ int ret;
+ int reg_value;
+ struct power_supply *psy = dev_get_drvdata(dev);
+ struct ab8500_fg *di = power_supply_get_drvdata(psy);
+
+ if (kstrtoint(buf, 10, &reg_value))
+ goto fail;
+
+ if (reg_value > 0x1) {
+ dev_err(dev, "Incorrect parameter, echo 0/1 to disable/enable Pcut feature\n");
+ goto fail;
+ }
+
+ ret = abx500_set_register_interruptible(di->dev, AB8500_RTC,
+ AB8505_RTC_PCUT_CTL_STATUS_REG, (u8)reg_value);
+
+ if (ret < 0)
+ dev_err(dev, "Failed to set AB8505_RTC_PCUT_CTL_STATUS_REG\n");
+
+fail:
+ return count;
+}
+
+static ssize_t ab8505_powercut_flag_read(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+
+ int ret;
+ u8 reg_value;
+ struct power_supply *psy = dev_get_drvdata(dev);
+ struct ab8500_fg *di = power_supply_get_drvdata(psy);
+
+ ret = abx500_get_register_interruptible(di->dev, AB8500_RTC,
+ AB8505_RTC_PCUT_CTL_STATUS_REG, &reg_value);
+
+ if (ret < 0) {
+ dev_err(dev, "Failed to read AB8505_RTC_PCUT_CTL_STATUS_REG\n");
+ goto fail;
+ }
+
+ return scnprintf(buf, PAGE_SIZE, "%d\n", ((reg_value & 0x10) >> 4));
+
+fail:
+ return ret;
+}
+
+static ssize_t ab8505_powercut_debounce_read(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ int ret;
+ u8 reg_value;
+ struct power_supply *psy = dev_get_drvdata(dev);
+ struct ab8500_fg *di = power_supply_get_drvdata(psy);
+
+ ret = abx500_get_register_interruptible(di->dev, AB8500_RTC,
+ AB8505_RTC_PCUT_DEBOUNCE_REG, &reg_value);
+
+ if (ret < 0) {
+ dev_err(dev, "Failed to read AB8505_RTC_PCUT_DEBOUNCE_REG\n");
+ goto fail;
+ }
+
+ return scnprintf(buf, PAGE_SIZE, "%d\n", (reg_value & 0x7));
+
+fail:
+ return ret;
+}
+
+static ssize_t ab8505_powercut_debounce_write(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ int ret;
+ int reg_value;
+ struct power_supply *psy = dev_get_drvdata(dev);
+ struct ab8500_fg *di = power_supply_get_drvdata(psy);
+
+ if (kstrtoint(buf, 10, &reg_value))
+ goto fail;
+
+ if (reg_value > 0x7) {
+ dev_err(dev, "Incorrect parameter, echo 0 to 7 for debounce setting\n");
+ goto fail;
+ }
+
+ ret = abx500_set_register_interruptible(di->dev, AB8500_RTC,
+ AB8505_RTC_PCUT_DEBOUNCE_REG, (u8)reg_value);
+
+ if (ret < 0)
+ dev_err(dev, "Failed to set AB8505_RTC_PCUT_DEBOUNCE_REG\n");
+
+fail:
+ return count;
+}
+
+static ssize_t ab8505_powercut_enable_status_read(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ int ret;
+ u8 reg_value;
+ struct power_supply *psy = dev_get_drvdata(dev);
+ struct ab8500_fg *di = power_supply_get_drvdata(psy);
+
+ ret = abx500_get_register_interruptible(di->dev, AB8500_RTC,
+ AB8505_RTC_PCUT_CTL_STATUS_REG, &reg_value);
+
+ if (ret < 0) {
+ dev_err(dev, "Failed to read AB8505_RTC_PCUT_CTL_STATUS_REG\n");
+ goto fail;
+ }
+
+ return scnprintf(buf, PAGE_SIZE, "%d\n", ((reg_value & 0x20) >> 5));
+
+fail:
+ return ret;
+}
+
+static struct device_attribute ab8505_fg_sysfs_psy_attrs[] = {
+ __ATTR(powercut_flagtime, (S_IRUGO | S_IWUSR | S_IWGRP),
+ ab8505_powercut_flagtime_read, ab8505_powercut_flagtime_write),
+ __ATTR(powercut_maxtime, (S_IRUGO | S_IWUSR | S_IWGRP),
+ ab8505_powercut_maxtime_read, ab8505_powercut_maxtime_write),
+ __ATTR(powercut_restart_max, (S_IRUGO | S_IWUSR | S_IWGRP),
+ ab8505_powercut_restart_read, ab8505_powercut_restart_write),
+ __ATTR(powercut_timer, S_IRUGO, ab8505_powercut_timer_read, NULL),
+ __ATTR(powercut_restart_counter, S_IRUGO,
+ ab8505_powercut_restart_counter_read, NULL),
+ __ATTR(powercut_enable, (S_IRUGO | S_IWUSR | S_IWGRP),
+ ab8505_powercut_read, ab8505_powercut_write),
+ __ATTR(powercut_flag, S_IRUGO, ab8505_powercut_flag_read, NULL),
+ __ATTR(powercut_debounce_time, (S_IRUGO | S_IWUSR | S_IWGRP),
+ ab8505_powercut_debounce_read, ab8505_powercut_debounce_write),
+ __ATTR(powercut_enable_status, S_IRUGO,
+ ab8505_powercut_enable_status_read, NULL),
+};
+
+static int ab8500_fg_sysfs_psy_create_attrs(struct ab8500_fg *di)
+{
+ unsigned int i;
+
+ if (is_ab8505(di->parent)) {
+ for (i = 0; i < ARRAY_SIZE(ab8505_fg_sysfs_psy_attrs); i++)
+ if (device_create_file(&di->fg_psy->dev,
+ &ab8505_fg_sysfs_psy_attrs[i]))
+ goto sysfs_psy_create_attrs_failed_ab8505;
+ }
+ return 0;
+sysfs_psy_create_attrs_failed_ab8505:
+ dev_err(&di->fg_psy->dev, "Failed creating sysfs psy attrs for ab8505.\n");
+ while (i--)
+ device_remove_file(&di->fg_psy->dev,
+ &ab8505_fg_sysfs_psy_attrs[i]);
+
+ return -EIO;
+}
+
+static void ab8500_fg_sysfs_psy_remove_attrs(struct ab8500_fg *di)
+{
+ unsigned int i;
+
+ if (is_ab8505(di->parent)) {
+ for (i = 0; i < ARRAY_SIZE(ab8505_fg_sysfs_psy_attrs); i++)
+ (void)device_remove_file(&di->fg_psy->dev,
+ &ab8505_fg_sysfs_psy_attrs[i]);
+ }
+}
+
+/* Exposure to the sysfs interface <<END>> */
+
+#if defined(CONFIG_PM)
+static int ab8500_fg_resume(struct platform_device *pdev)
+{
+ struct ab8500_fg *di = platform_get_drvdata(pdev);
+
+ /*
+ * Change state if we're not charging. If we're charging we will wake
+ * up on the FG IRQ
+ */
+ if (!di->flags.charging) {
+ ab8500_fg_discharge_state_to(di, AB8500_FG_DISCHARGE_WAKEUP);
+ queue_work(di->fg_wq, &di->fg_work);
+ }
+
+ return 0;
+}
+
+static int ab8500_fg_suspend(struct platform_device *pdev,
+ pm_message_t state)
+{
+ struct ab8500_fg *di = platform_get_drvdata(pdev);
+
+ flush_delayed_work(&di->fg_periodic_work);
+ flush_work(&di->fg_work);
+ flush_work(&di->fg_acc_cur_work);
+ flush_delayed_work(&di->fg_reinit_work);
+ flush_delayed_work(&di->fg_low_bat_work);
+ flush_delayed_work(&di->fg_check_hw_failure_work);
+
+ /*
+ * If the FG is enabled we will disable it before going to suspend
+ * only if we're not charging
+ */
+ if (di->flags.fg_enabled && !di->flags.charging)
+ ab8500_fg_coulomb_counter(di, false);
+
+ return 0;
+}
+#else
+#define ab8500_fg_suspend NULL
+#define ab8500_fg_resume NULL
+#endif
+
+static int ab8500_fg_remove(struct platform_device *pdev)
+{
+ int ret = 0;
+ struct ab8500_fg *di = platform_get_drvdata(pdev);
+
+ list_del(&di->node);
+
+ /* Disable coulomb counter */
+ ret = ab8500_fg_coulomb_counter(di, false);
+ if (ret)
+ dev_err(di->dev, "failed to disable coulomb counter\n");
+
+ destroy_workqueue(di->fg_wq);
+ ab8500_fg_sysfs_exit(di);
+
+ flush_scheduled_work();
+ ab8500_fg_sysfs_psy_remove_attrs(di);
+ power_supply_unregister(di->fg_psy);
+ return ret;
+}
+
+/* ab8500 fg driver interrupts and their respective isr */
+static struct ab8500_fg_interrupts ab8500_fg_irq_th[] = {
+ {"NCONV_ACCU", ab8500_fg_cc_convend_handler},
+ {"BATT_OVV", ab8500_fg_batt_ovv_handler},
+ {"LOW_BAT_F", ab8500_fg_lowbatf_handler},
+ {"CC_INT_CALIB", ab8500_fg_cc_int_calib_handler},
+};
+
+static struct ab8500_fg_interrupts ab8500_fg_irq_bh[] = {
+ {"CCEOC", ab8500_fg_cc_data_end_handler},
+};
+
+static char *supply_interface[] = {
+ "ab8500_chargalg",
+ "ab8500_usb",
+};
+
+static const struct power_supply_desc ab8500_fg_desc = {
+ .name = "ab8500_fg",
+ .type = POWER_SUPPLY_TYPE_BATTERY,
+ .properties = ab8500_fg_props,
+ .num_properties = ARRAY_SIZE(ab8500_fg_props),
+ .get_property = ab8500_fg_get_property,
+ .external_power_changed = ab8500_fg_external_power_changed,
+};
+
+static int ab8500_fg_probe(struct platform_device *pdev)
+{
+ struct device_node *np = pdev->dev.of_node;
+ struct abx500_bm_data *plat = pdev->dev.platform_data;
+ struct power_supply_config psy_cfg = {};
+ struct ab8500_fg *di;
+ int i, irq;
+ int ret = 0;
+
+ di = devm_kzalloc(&pdev->dev, sizeof(*di), GFP_KERNEL);
+ if (!di) {
+ dev_err(&pdev->dev, "%s no mem for ab8500_fg\n", __func__);
+ return -ENOMEM;
+ }
+
+ if (!plat) {
+ dev_err(&pdev->dev, "no battery management data supplied\n");
+ return -EINVAL;
+ }
+ di->bm = plat;
+
+ if (np) {
+ ret = ab8500_bm_of_probe(&pdev->dev, np, di->bm);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to get battery information\n");
+ return ret;
+ }
+ }
+
+ mutex_init(&di->cc_lock);
+
+ /* get parent data */
+ di->dev = &pdev->dev;
+ di->parent = dev_get_drvdata(pdev->dev.parent);
+
+ di->main_bat_v = devm_iio_channel_get(&pdev->dev, "main_bat_v");
+ if (IS_ERR(di->main_bat_v)) {
+ if (PTR_ERR(di->main_bat_v) == -ENODEV)
+ return -EPROBE_DEFER;
+ dev_err(&pdev->dev, "failed to get main battery ADC channel\n");
+ return PTR_ERR(di->main_bat_v);
+ }
+
+ psy_cfg.supplied_to = supply_interface;
+ psy_cfg.num_supplicants = ARRAY_SIZE(supply_interface);
+ psy_cfg.drv_data = di;
+
+ di->bat_cap.max_mah_design = MILLI_TO_MICRO *
+ di->bm->bat_type[di->bm->batt_id].charge_full_design;
+
+ di->bat_cap.max_mah = di->bat_cap.max_mah_design;
+
+ di->vbat_nom = di->bm->bat_type[di->bm->batt_id].nominal_voltage;
+
+ di->init_capacity = true;
+
+ ab8500_fg_charge_state_to(di, AB8500_FG_CHARGE_INIT);
+ ab8500_fg_discharge_state_to(di, AB8500_FG_DISCHARGE_INIT);
+
+ /* Create a work queue for running the FG algorithm */
+ di->fg_wq = alloc_ordered_workqueue("ab8500_fg_wq", WQ_MEM_RECLAIM);
+ if (di->fg_wq == NULL) {
+ dev_err(di->dev, "failed to create work queue\n");
+ return -ENOMEM;
+ }
+
+ /* Init work for running the fg algorithm instantly */
+ INIT_WORK(&di->fg_work, ab8500_fg_instant_work);
+
+ /* Init work for getting the battery accumulated current */
+ INIT_WORK(&di->fg_acc_cur_work, ab8500_fg_acc_cur_work);
+
+ /* Init work for reinitialising the fg algorithm */
+ INIT_DEFERRABLE_WORK(&di->fg_reinit_work,
+ ab8500_fg_reinit_work);
+
+ /* Work delayed Queue to run the state machine */
+ INIT_DEFERRABLE_WORK(&di->fg_periodic_work,
+ ab8500_fg_periodic_work);
+
+ /* Work to check low battery condition */
+ INIT_DEFERRABLE_WORK(&di->fg_low_bat_work,
+ ab8500_fg_low_bat_work);
+
+ /* Init work for HW failure check */
+ INIT_DEFERRABLE_WORK(&di->fg_check_hw_failure_work,
+ ab8500_fg_check_hw_failure_work);
+
+ /* Reset battery low voltage flag */
+ di->flags.low_bat = false;
+
+ /* Initialize low battery counter */
+ di->low_bat_cnt = 10;
+
+ /* Initialize OVV, and other registers */
+ ret = ab8500_fg_init_hw_registers(di);
+ if (ret) {
+ dev_err(di->dev, "failed to initialize registers\n");
+ goto free_inst_curr_wq;
+ }
+
+ /* Consider battery unknown until we're informed otherwise */
+ di->flags.batt_unknown = true;
+ di->flags.batt_id_received = false;
+
+ /* Register FG power supply class */
+ di->fg_psy = power_supply_register(di->dev, &ab8500_fg_desc, &psy_cfg);
+ if (IS_ERR(di->fg_psy)) {
+ dev_err(di->dev, "failed to register FG psy\n");
+ ret = PTR_ERR(di->fg_psy);
+ goto free_inst_curr_wq;
+ }
+
+ di->fg_samples = SEC_TO_SAMPLE(di->bm->fg_params->init_timer);
+ ab8500_fg_coulomb_counter(di, true);
+
+ /*
+ * Initialize completion used to notify completion and start
+ * of inst current
+ */
+ init_completion(&di->ab8500_fg_started);
+ init_completion(&di->ab8500_fg_complete);
+
+ /* Register primary interrupt handlers */
+ for (i = 0; i < ARRAY_SIZE(ab8500_fg_irq_th); i++) {
+ irq = platform_get_irq_byname(pdev, ab8500_fg_irq_th[i].name);
+ if (irq < 0) {
+ ret = irq;
+ goto free_irq_th;
+ }
+
+ ret = request_irq(irq, ab8500_fg_irq_th[i].isr,
+ IRQF_SHARED | IRQF_NO_SUSPEND,
+ ab8500_fg_irq_th[i].name, di);
+
+ if (ret != 0) {
+ dev_err(di->dev, "failed to request %s IRQ %d: %d\n",
+ ab8500_fg_irq_th[i].name, irq, ret);
+ goto free_irq_th;
+ }
+ dev_dbg(di->dev, "Requested %s IRQ %d: %d\n",
+ ab8500_fg_irq_th[i].name, irq, ret);
+ }
+
+ /* Register threaded interrupt handler */
+ irq = platform_get_irq_byname(pdev, ab8500_fg_irq_bh[0].name);
+ if (irq < 0) {
+ ret = irq;
+ goto free_irq_th;
+ }
+
+ ret = request_threaded_irq(irq, NULL, ab8500_fg_irq_bh[0].isr,
+ IRQF_SHARED | IRQF_NO_SUSPEND | IRQF_ONESHOT,
+ ab8500_fg_irq_bh[0].name, di);
+
+ if (ret != 0) {
+ dev_err(di->dev, "failed to request %s IRQ %d: %d\n",
+ ab8500_fg_irq_bh[0].name, irq, ret);
+ goto free_irq_th;
+ }
+ dev_dbg(di->dev, "Requested %s IRQ %d: %d\n",
+ ab8500_fg_irq_bh[0].name, irq, ret);
+
+ di->irq = platform_get_irq_byname(pdev, "CCEOC");
+ disable_irq(di->irq);
+ di->nbr_cceoc_irq_cnt = 0;
+
+ platform_set_drvdata(pdev, di);
+
+ ret = ab8500_fg_sysfs_init(di);
+ if (ret) {
+ dev_err(di->dev, "failed to create sysfs entry\n");
+ goto free_irq;
+ }
+
+ ret = ab8500_fg_sysfs_psy_create_attrs(di);
+ if (ret) {
+ dev_err(di->dev, "failed to create FG psy\n");
+ ab8500_fg_sysfs_exit(di);
+ goto free_irq;
+ }
+
+ /* Calibrate the fg first time */
+ di->flags.calibrate = true;
+ di->calib_state = AB8500_FG_CALIB_INIT;
+
+ /* Use room temp as default value until we get an update from driver. */
+ di->bat_temp = 210;
+
+ /* Run the FG algorithm */
+ queue_delayed_work(di->fg_wq, &di->fg_periodic_work, 0);
+
+ list_add_tail(&di->node, &ab8500_fg_list);
+
+ return ret;
+
+free_irq:
+ /* We also have to free all registered irqs */
+ irq = platform_get_irq_byname(pdev, ab8500_fg_irq_bh[0].name);
+ free_irq(irq, di);
+free_irq_th:
+ while (--i >= 0) {
+ /* Last assignment of i from primary interrupt handlers */
+ irq = platform_get_irq_byname(pdev, ab8500_fg_irq_th[i].name);
+ free_irq(irq, di);
+ }
+
+ power_supply_unregister(di->fg_psy);
+free_inst_curr_wq:
+ destroy_workqueue(di->fg_wq);
+ return ret;
+}
+
+static const struct of_device_id ab8500_fg_match[] = {
+ { .compatible = "stericsson,ab8500-fg", },
+ { },
+};
+MODULE_DEVICE_TABLE(of, ab8500_fg_match);
+
+static struct platform_driver ab8500_fg_driver = {
+ .probe = ab8500_fg_probe,
+ .remove = ab8500_fg_remove,
+ .suspend = ab8500_fg_suspend,
+ .resume = ab8500_fg_resume,
+ .driver = {
+ .name = "ab8500-fg",
+ .of_match_table = ab8500_fg_match,
+ },
+};
+
+static int __init ab8500_fg_init(void)
+{
+ return platform_driver_register(&ab8500_fg_driver);
+}
+
+static void __exit ab8500_fg_exit(void)
+{
+ platform_driver_unregister(&ab8500_fg_driver);
+}
+
+subsys_initcall_sync(ab8500_fg_init);
+module_exit(ab8500_fg_exit);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Johan Palsson, Karl Komierowski");
+MODULE_ALIAS("platform:ab8500-fg");
+MODULE_DESCRIPTION("AB8500 Fuel Gauge driver");
diff --git a/drivers/power/supply/abx500_chargalg.c b/drivers/power/supply/abx500_chargalg.c
new file mode 100644
index 000000000..175c4f3d7
--- /dev/null
+++ b/drivers/power/supply/abx500_chargalg.c
@@ -0,0 +1,2104 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) ST-Ericsson SA 2012
+ * Copyright (c) 2012 Sony Mobile Communications AB
+ *
+ * Charging algorithm driver for abx500 variants
+ *
+ * Authors:
+ * Johan Palsson <johan.palsson@stericsson.com>
+ * Karl Komierowski <karl.komierowski@stericsson.com>
+ * Arun R Murthy <arun.murthy@stericsson.com>
+ * Author: Imre Sunyi <imre.sunyi@sonymobile.com>
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/hrtimer.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/platform_device.h>
+#include <linux/power_supply.h>
+#include <linux/completion.h>
+#include <linux/workqueue.h>
+#include <linux/kobject.h>
+#include <linux/of.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/abx500.h>
+#include <linux/mfd/abx500/ab8500.h>
+#include <linux/mfd/abx500/ux500_chargalg.h>
+#include <linux/mfd/abx500/ab8500-bm.h>
+#include <linux/notifier.h>
+
+/* Watchdog kick interval */
+#define CHG_WD_INTERVAL (6 * HZ)
+
+/* End-of-charge criteria counter */
+#define EOC_COND_CNT 10
+
+/* One hour expressed in seconds */
+#define ONE_HOUR_IN_SECONDS 3600
+
+/* Five minutes expressed in seconds */
+#define FIVE_MINUTES_IN_SECONDS 300
+
+#define CHARGALG_CURR_STEP_LOW 0
+#define CHARGALG_CURR_STEP_HIGH 100
+
+enum abx500_chargers {
+ NO_CHG,
+ AC_CHG,
+ USB_CHG,
+};
+
+struct abx500_chargalg_charger_info {
+ enum abx500_chargers conn_chg;
+ enum abx500_chargers prev_conn_chg;
+ enum abx500_chargers online_chg;
+ enum abx500_chargers prev_online_chg;
+ enum abx500_chargers charger_type;
+ bool usb_chg_ok;
+ bool ac_chg_ok;
+ int usb_volt;
+ int usb_curr;
+ int ac_volt;
+ int ac_curr;
+ int usb_vset;
+ int usb_iset;
+ int ac_vset;
+ int ac_iset;
+};
+
+struct abx500_chargalg_suspension_status {
+ bool suspended_change;
+ bool ac_suspended;
+ bool usb_suspended;
+};
+
+struct abx500_chargalg_current_step_status {
+ bool curr_step_change;
+ int curr_step;
+};
+
+struct abx500_chargalg_battery_data {
+ int temp;
+ int volt;
+ int avg_curr;
+ int inst_curr;
+ int percent;
+};
+
+enum abx500_chargalg_states {
+ STATE_HANDHELD_INIT,
+ STATE_HANDHELD,
+ STATE_CHG_NOT_OK_INIT,
+ STATE_CHG_NOT_OK,
+ STATE_HW_TEMP_PROTECT_INIT,
+ STATE_HW_TEMP_PROTECT,
+ STATE_NORMAL_INIT,
+ STATE_NORMAL,
+ STATE_WAIT_FOR_RECHARGE_INIT,
+ STATE_WAIT_FOR_RECHARGE,
+ STATE_MAINTENANCE_A_INIT,
+ STATE_MAINTENANCE_A,
+ STATE_MAINTENANCE_B_INIT,
+ STATE_MAINTENANCE_B,
+ STATE_TEMP_UNDEROVER_INIT,
+ STATE_TEMP_UNDEROVER,
+ STATE_TEMP_LOWHIGH_INIT,
+ STATE_TEMP_LOWHIGH,
+ STATE_SUSPENDED_INIT,
+ STATE_SUSPENDED,
+ STATE_OVV_PROTECT_INIT,
+ STATE_OVV_PROTECT,
+ STATE_SAFETY_TIMER_EXPIRED_INIT,
+ STATE_SAFETY_TIMER_EXPIRED,
+ STATE_BATT_REMOVED_INIT,
+ STATE_BATT_REMOVED,
+ STATE_WD_EXPIRED_INIT,
+ STATE_WD_EXPIRED,
+};
+
+static const char *states[] = {
+ "HANDHELD_INIT",
+ "HANDHELD",
+ "CHG_NOT_OK_INIT",
+ "CHG_NOT_OK",
+ "HW_TEMP_PROTECT_INIT",
+ "HW_TEMP_PROTECT",
+ "NORMAL_INIT",
+ "NORMAL",
+ "WAIT_FOR_RECHARGE_INIT",
+ "WAIT_FOR_RECHARGE",
+ "MAINTENANCE_A_INIT",
+ "MAINTENANCE_A",
+ "MAINTENANCE_B_INIT",
+ "MAINTENANCE_B",
+ "TEMP_UNDEROVER_INIT",
+ "TEMP_UNDEROVER",
+ "TEMP_LOWHIGH_INIT",
+ "TEMP_LOWHIGH",
+ "SUSPENDED_INIT",
+ "SUSPENDED",
+ "OVV_PROTECT_INIT",
+ "OVV_PROTECT",
+ "SAFETY_TIMER_EXPIRED_INIT",
+ "SAFETY_TIMER_EXPIRED",
+ "BATT_REMOVED_INIT",
+ "BATT_REMOVED",
+ "WD_EXPIRED_INIT",
+ "WD_EXPIRED",
+};
+
+struct abx500_chargalg_events {
+ bool batt_unknown;
+ bool mainextchnotok;
+ bool batt_ovv;
+ bool batt_rem;
+ bool btemp_underover;
+ bool btemp_lowhigh;
+ bool main_thermal_prot;
+ bool usb_thermal_prot;
+ bool main_ovv;
+ bool vbus_ovv;
+ bool usbchargernotok;
+ bool safety_timer_expired;
+ bool maintenance_timer_expired;
+ bool ac_wd_expired;
+ bool usb_wd_expired;
+ bool ac_cv_active;
+ bool usb_cv_active;
+ bool vbus_collapsed;
+};
+
+/**
+ * struct abx500_charge_curr_maximization - Charger maximization parameters
+ * @original_iset: the non optimized/maximised charger current
+ * @current_iset: the charging current used at this moment
+ * @test_delta_i: the delta between the current we want to charge and the
+ current that is really going into the battery
+ * @condition_cnt: number of iterations needed before a new charger current
+ is set
+ * @max_current: maximum charger current
+ * @wait_cnt: to avoid too fast current step down in case of charger
+ * voltage collapse, we insert this delay between step
+ * down
+ * @level: tells in how many steps the charging current has been
+ increased
+ */
+struct abx500_charge_curr_maximization {
+ int original_iset;
+ int current_iset;
+ int test_delta_i;
+ int condition_cnt;
+ int max_current;
+ int wait_cnt;
+ u8 level;
+};
+
+enum maxim_ret {
+ MAXIM_RET_NOACTION,
+ MAXIM_RET_CHANGE,
+ MAXIM_RET_IBAT_TOO_HIGH,
+};
+
+/**
+ * struct abx500_chargalg - abx500 Charging algorithm device information
+ * @dev: pointer to the structure device
+ * @charge_status: battery operating status
+ * @eoc_cnt: counter used to determine end-of_charge
+ * @maintenance_chg: indicate if maintenance charge is active
+ * @t_hyst_norm temperature hysteresis when the temperature has been
+ * over or under normal limits
+ * @t_hyst_lowhigh temperature hysteresis when the temperature has been
+ * over or under the high or low limits
+ * @charge_state: current state of the charging algorithm
+ * @ccm charging current maximization parameters
+ * @chg_info: information about connected charger types
+ * @batt_data: data of the battery
+ * @susp_status: current charger suspension status
+ * @bm: Platform specific battery management information
+ * @curr_status: Current step status for over-current protection
+ * @parent: pointer to the struct abx500
+ * @chargalg_psy: structure that holds the battery properties exposed by
+ * the charging algorithm
+ * @events: structure for information about events triggered
+ * @chargalg_wq: work queue for running the charging algorithm
+ * @chargalg_periodic_work: work to run the charging algorithm periodically
+ * @chargalg_wd_work: work to kick the charger watchdog periodically
+ * @chargalg_work: work to run the charging algorithm instantly
+ * @safety_timer: charging safety timer
+ * @maintenance_timer: maintenance charging timer
+ * @chargalg_kobject: structure of type kobject
+ */
+struct abx500_chargalg {
+ struct device *dev;
+ int charge_status;
+ int eoc_cnt;
+ bool maintenance_chg;
+ int t_hyst_norm;
+ int t_hyst_lowhigh;
+ enum abx500_chargalg_states charge_state;
+ struct abx500_charge_curr_maximization ccm;
+ struct abx500_chargalg_charger_info chg_info;
+ struct abx500_chargalg_battery_data batt_data;
+ struct abx500_chargalg_suspension_status susp_status;
+ struct ab8500 *parent;
+ struct abx500_chargalg_current_step_status curr_status;
+ struct abx500_bm_data *bm;
+ struct power_supply *chargalg_psy;
+ struct ux500_charger *ac_chg;
+ struct ux500_charger *usb_chg;
+ struct abx500_chargalg_events events;
+ struct workqueue_struct *chargalg_wq;
+ struct delayed_work chargalg_periodic_work;
+ struct delayed_work chargalg_wd_work;
+ struct work_struct chargalg_work;
+ struct hrtimer safety_timer;
+ struct hrtimer maintenance_timer;
+ struct kobject chargalg_kobject;
+};
+
+/*External charger prepare notifier*/
+BLOCKING_NOTIFIER_HEAD(charger_notifier_list);
+
+/* Main battery properties */
+static enum power_supply_property abx500_chargalg_props[] = {
+ POWER_SUPPLY_PROP_STATUS,
+ POWER_SUPPLY_PROP_HEALTH,
+};
+
+struct abx500_chargalg_sysfs_entry {
+ struct attribute attr;
+ ssize_t (*show)(struct abx500_chargalg *, char *);
+ ssize_t (*store)(struct abx500_chargalg *, const char *, size_t);
+};
+
+/**
+ * abx500_chargalg_safety_timer_expired() - Expiration of the safety timer
+ * @timer: pointer to the hrtimer structure
+ *
+ * This function gets called when the safety timer for the charger
+ * expires
+ */
+static enum hrtimer_restart
+abx500_chargalg_safety_timer_expired(struct hrtimer *timer)
+{
+ struct abx500_chargalg *di = container_of(timer, struct abx500_chargalg,
+ safety_timer);
+ dev_err(di->dev, "Safety timer expired\n");
+ di->events.safety_timer_expired = true;
+
+ /* Trigger execution of the algorithm instantly */
+ queue_work(di->chargalg_wq, &di->chargalg_work);
+
+ return HRTIMER_NORESTART;
+}
+
+/**
+ * abx500_chargalg_maintenance_timer_expired() - Expiration of
+ * the maintenance timer
+ * @timer: pointer to the timer structure
+ *
+ * This function gets called when the maintenence timer
+ * expires
+ */
+static enum hrtimer_restart
+abx500_chargalg_maintenance_timer_expired(struct hrtimer *timer)
+{
+
+ struct abx500_chargalg *di = container_of(timer, struct abx500_chargalg,
+ maintenance_timer);
+
+ dev_dbg(di->dev, "Maintenance timer expired\n");
+ di->events.maintenance_timer_expired = true;
+
+ /* Trigger execution of the algorithm instantly */
+ queue_work(di->chargalg_wq, &di->chargalg_work);
+
+ return HRTIMER_NORESTART;
+}
+
+/**
+ * abx500_chargalg_state_to() - Change charge state
+ * @di: pointer to the abx500_chargalg structure
+ *
+ * This function gets called when a charge state change should occur
+ */
+static void abx500_chargalg_state_to(struct abx500_chargalg *di,
+ enum abx500_chargalg_states state)
+{
+ dev_dbg(di->dev,
+ "State changed: %s (From state: [%d] %s =to=> [%d] %s )\n",
+ di->charge_state == state ? "NO" : "YES",
+ di->charge_state,
+ states[di->charge_state],
+ state,
+ states[state]);
+
+ di->charge_state = state;
+}
+
+static int abx500_chargalg_check_charger_enable(struct abx500_chargalg *di)
+{
+ switch (di->charge_state) {
+ case STATE_NORMAL:
+ case STATE_MAINTENANCE_A:
+ case STATE_MAINTENANCE_B:
+ break;
+ default:
+ return 0;
+ }
+
+ if (di->chg_info.charger_type & USB_CHG) {
+ return di->usb_chg->ops.check_enable(di->usb_chg,
+ di->bm->bat_type[di->bm->batt_id].normal_vol_lvl,
+ di->bm->bat_type[di->bm->batt_id].normal_cur_lvl);
+ } else if ((di->chg_info.charger_type & AC_CHG) &&
+ !(di->ac_chg->external)) {
+ return di->ac_chg->ops.check_enable(di->ac_chg,
+ di->bm->bat_type[di->bm->batt_id].normal_vol_lvl,
+ di->bm->bat_type[di->bm->batt_id].normal_cur_lvl);
+ }
+ return 0;
+}
+
+/**
+ * abx500_chargalg_check_charger_connection() - Check charger connection change
+ * @di: pointer to the abx500_chargalg structure
+ *
+ * This function will check if there is a change in the charger connection
+ * and change charge state accordingly. AC has precedence over USB.
+ */
+static int abx500_chargalg_check_charger_connection(struct abx500_chargalg *di)
+{
+ if (di->chg_info.conn_chg != di->chg_info.prev_conn_chg ||
+ di->susp_status.suspended_change) {
+ /*
+ * Charger state changed or suspension
+ * has changed since last update
+ */
+ if ((di->chg_info.conn_chg & AC_CHG) &&
+ !di->susp_status.ac_suspended) {
+ dev_dbg(di->dev, "Charging source is AC\n");
+ if (di->chg_info.charger_type != AC_CHG) {
+ di->chg_info.charger_type = AC_CHG;
+ abx500_chargalg_state_to(di, STATE_NORMAL_INIT);
+ }
+ } else if ((di->chg_info.conn_chg & USB_CHG) &&
+ !di->susp_status.usb_suspended) {
+ dev_dbg(di->dev, "Charging source is USB\n");
+ di->chg_info.charger_type = USB_CHG;
+ abx500_chargalg_state_to(di, STATE_NORMAL_INIT);
+ } else if (di->chg_info.conn_chg &&
+ (di->susp_status.ac_suspended ||
+ di->susp_status.usb_suspended)) {
+ dev_dbg(di->dev, "Charging is suspended\n");
+ di->chg_info.charger_type = NO_CHG;
+ abx500_chargalg_state_to(di, STATE_SUSPENDED_INIT);
+ } else {
+ dev_dbg(di->dev, "Charging source is OFF\n");
+ di->chg_info.charger_type = NO_CHG;
+ abx500_chargalg_state_to(di, STATE_HANDHELD_INIT);
+ }
+ di->chg_info.prev_conn_chg = di->chg_info.conn_chg;
+ di->susp_status.suspended_change = false;
+ }
+ return di->chg_info.conn_chg;
+}
+
+/**
+ * abx500_chargalg_check_current_step_status() - Check charging current
+ * step status.
+ * @di: pointer to the abx500_chargalg structure
+ *
+ * This function will check if there is a change in the charging current step
+ * and change charge state accordingly.
+ */
+static void abx500_chargalg_check_current_step_status
+ (struct abx500_chargalg *di)
+{
+ if (di->curr_status.curr_step_change)
+ abx500_chargalg_state_to(di, STATE_NORMAL_INIT);
+ di->curr_status.curr_step_change = false;
+}
+
+/**
+ * abx500_chargalg_start_safety_timer() - Start charging safety timer
+ * @di: pointer to the abx500_chargalg structure
+ *
+ * The safety timer is used to avoid overcharging of old or bad batteries.
+ * There are different timers for AC and USB
+ */
+static void abx500_chargalg_start_safety_timer(struct abx500_chargalg *di)
+{
+ /* Charger-dependent expiration time in hours*/
+ int timer_expiration = 0;
+
+ switch (di->chg_info.charger_type) {
+ case AC_CHG:
+ timer_expiration = di->bm->main_safety_tmr_h;
+ break;
+
+ case USB_CHG:
+ timer_expiration = di->bm->usb_safety_tmr_h;
+ break;
+
+ default:
+ dev_err(di->dev, "Unknown charger to charge from\n");
+ break;
+ }
+
+ di->events.safety_timer_expired = false;
+ hrtimer_set_expires_range(&di->safety_timer,
+ ktime_set(timer_expiration * ONE_HOUR_IN_SECONDS, 0),
+ ktime_set(FIVE_MINUTES_IN_SECONDS, 0));
+ hrtimer_start_expires(&di->safety_timer, HRTIMER_MODE_REL);
+}
+
+/**
+ * abx500_chargalg_stop_safety_timer() - Stop charging safety timer
+ * @di: pointer to the abx500_chargalg structure
+ *
+ * The safety timer is stopped whenever the NORMAL state is exited
+ */
+static void abx500_chargalg_stop_safety_timer(struct abx500_chargalg *di)
+{
+ if (hrtimer_try_to_cancel(&di->safety_timer) >= 0)
+ di->events.safety_timer_expired = false;
+}
+
+/**
+ * abx500_chargalg_start_maintenance_timer() - Start charging maintenance timer
+ * @di: pointer to the abx500_chargalg structure
+ * @duration: duration of ther maintenance timer in hours
+ *
+ * The maintenance timer is used to maintain the charge in the battery once
+ * the battery is considered full. These timers are chosen to match the
+ * discharge curve of the battery
+ */
+static void abx500_chargalg_start_maintenance_timer(struct abx500_chargalg *di,
+ int duration)
+{
+ hrtimer_set_expires_range(&di->maintenance_timer,
+ ktime_set(duration * ONE_HOUR_IN_SECONDS, 0),
+ ktime_set(FIVE_MINUTES_IN_SECONDS, 0));
+ di->events.maintenance_timer_expired = false;
+ hrtimer_start_expires(&di->maintenance_timer, HRTIMER_MODE_REL);
+}
+
+/**
+ * abx500_chargalg_stop_maintenance_timer() - Stop maintenance timer
+ * @di: pointer to the abx500_chargalg structure
+ *
+ * The maintenance timer is stopped whenever maintenance ends or when another
+ * state is entered
+ */
+static void abx500_chargalg_stop_maintenance_timer(struct abx500_chargalg *di)
+{
+ if (hrtimer_try_to_cancel(&di->maintenance_timer) >= 0)
+ di->events.maintenance_timer_expired = false;
+}
+
+/**
+ * abx500_chargalg_kick_watchdog() - Kick charger watchdog
+ * @di: pointer to the abx500_chargalg structure
+ *
+ * The charger watchdog have to be kicked periodically whenever the charger is
+ * on, else the ABB will reset the system
+ */
+static int abx500_chargalg_kick_watchdog(struct abx500_chargalg *di)
+{
+ /* Check if charger exists and kick watchdog if charging */
+ if (di->ac_chg && di->ac_chg->ops.kick_wd &&
+ di->chg_info.online_chg & AC_CHG) {
+ /*
+ * If AB charger watchdog expired, pm2xxx charging
+ * gets disabled. To be safe, kick both AB charger watchdog
+ * and pm2xxx watchdog.
+ */
+ if (di->ac_chg->external &&
+ di->usb_chg && di->usb_chg->ops.kick_wd)
+ di->usb_chg->ops.kick_wd(di->usb_chg);
+
+ return di->ac_chg->ops.kick_wd(di->ac_chg);
+ }
+ else if (di->usb_chg && di->usb_chg->ops.kick_wd &&
+ di->chg_info.online_chg & USB_CHG)
+ return di->usb_chg->ops.kick_wd(di->usb_chg);
+
+ return -ENXIO;
+}
+
+/**
+ * abx500_chargalg_ac_en() - Turn on/off the AC charger
+ * @di: pointer to the abx500_chargalg structure
+ * @enable: charger on/off
+ * @vset: requested charger output voltage
+ * @iset: requested charger output current
+ *
+ * The AC charger will be turned on/off with the requested charge voltage and
+ * current
+ */
+static int abx500_chargalg_ac_en(struct abx500_chargalg *di, int enable,
+ int vset, int iset)
+{
+ static int abx500_chargalg_ex_ac_enable_toggle;
+
+ if (!di->ac_chg || !di->ac_chg->ops.enable)
+ return -ENXIO;
+
+ /* Select maximum of what both the charger and the battery supports */
+ if (di->ac_chg->max_out_volt)
+ vset = min(vset, di->ac_chg->max_out_volt);
+ if (di->ac_chg->max_out_curr)
+ iset = min(iset, di->ac_chg->max_out_curr);
+
+ di->chg_info.ac_iset = iset;
+ di->chg_info.ac_vset = vset;
+
+ /* Enable external charger */
+ if (enable && di->ac_chg->external &&
+ !abx500_chargalg_ex_ac_enable_toggle) {
+ blocking_notifier_call_chain(&charger_notifier_list,
+ 0, di->dev);
+ abx500_chargalg_ex_ac_enable_toggle++;
+ }
+
+ return di->ac_chg->ops.enable(di->ac_chg, enable, vset, iset);
+}
+
+/**
+ * abx500_chargalg_usb_en() - Turn on/off the USB charger
+ * @di: pointer to the abx500_chargalg structure
+ * @enable: charger on/off
+ * @vset: requested charger output voltage
+ * @iset: requested charger output current
+ *
+ * The USB charger will be turned on/off with the requested charge voltage and
+ * current
+ */
+static int abx500_chargalg_usb_en(struct abx500_chargalg *di, int enable,
+ int vset, int iset)
+{
+ if (!di->usb_chg || !di->usb_chg->ops.enable)
+ return -ENXIO;
+
+ /* Select maximum of what both the charger and the battery supports */
+ if (di->usb_chg->max_out_volt)
+ vset = min(vset, di->usb_chg->max_out_volt);
+ if (di->usb_chg->max_out_curr)
+ iset = min(iset, di->usb_chg->max_out_curr);
+
+ di->chg_info.usb_iset = iset;
+ di->chg_info.usb_vset = vset;
+
+ return di->usb_chg->ops.enable(di->usb_chg, enable, vset, iset);
+}
+
+/**
+ * abx500_chargalg_update_chg_curr() - Update charger current
+ * @di: pointer to the abx500_chargalg structure
+ * @iset: requested charger output current
+ *
+ * The charger output current will be updated for the charger
+ * that is currently in use
+ */
+static int abx500_chargalg_update_chg_curr(struct abx500_chargalg *di,
+ int iset)
+{
+ /* Check if charger exists and update current if charging */
+ if (di->ac_chg && di->ac_chg->ops.update_curr &&
+ di->chg_info.charger_type & AC_CHG) {
+ /*
+ * Select maximum of what both the charger
+ * and the battery supports
+ */
+ if (di->ac_chg->max_out_curr)
+ iset = min(iset, di->ac_chg->max_out_curr);
+
+ di->chg_info.ac_iset = iset;
+
+ return di->ac_chg->ops.update_curr(di->ac_chg, iset);
+ } else if (di->usb_chg && di->usb_chg->ops.update_curr &&
+ di->chg_info.charger_type & USB_CHG) {
+ /*
+ * Select maximum of what both the charger
+ * and the battery supports
+ */
+ if (di->usb_chg->max_out_curr)
+ iset = min(iset, di->usb_chg->max_out_curr);
+
+ di->chg_info.usb_iset = iset;
+
+ return di->usb_chg->ops.update_curr(di->usb_chg, iset);
+ }
+
+ return -ENXIO;
+}
+
+/**
+ * abx500_chargalg_stop_charging() - Stop charging
+ * @di: pointer to the abx500_chargalg structure
+ *
+ * This function is called from any state where charging should be stopped.
+ * All charging is disabled and all status parameters and timers are changed
+ * accordingly
+ */
+static void abx500_chargalg_stop_charging(struct abx500_chargalg *di)
+{
+ abx500_chargalg_ac_en(di, false, 0, 0);
+ abx500_chargalg_usb_en(di, false, 0, 0);
+ abx500_chargalg_stop_safety_timer(di);
+ abx500_chargalg_stop_maintenance_timer(di);
+ di->charge_status = POWER_SUPPLY_STATUS_NOT_CHARGING;
+ di->maintenance_chg = false;
+ cancel_delayed_work(&di->chargalg_wd_work);
+ power_supply_changed(di->chargalg_psy);
+}
+
+/**
+ * abx500_chargalg_hold_charging() - Pauses charging
+ * @di: pointer to the abx500_chargalg structure
+ *
+ * This function is called in the case where maintenance charging has been
+ * disabled and instead a battery voltage mode is entered to check when the
+ * battery voltage has reached a certain recharge voltage
+ */
+static void abx500_chargalg_hold_charging(struct abx500_chargalg *di)
+{
+ abx500_chargalg_ac_en(di, false, 0, 0);
+ abx500_chargalg_usb_en(di, false, 0, 0);
+ abx500_chargalg_stop_safety_timer(di);
+ abx500_chargalg_stop_maintenance_timer(di);
+ di->charge_status = POWER_SUPPLY_STATUS_CHARGING;
+ di->maintenance_chg = false;
+ cancel_delayed_work(&di->chargalg_wd_work);
+ power_supply_changed(di->chargalg_psy);
+}
+
+/**
+ * abx500_chargalg_start_charging() - Start the charger
+ * @di: pointer to the abx500_chargalg structure
+ * @vset: requested charger output voltage
+ * @iset: requested charger output current
+ *
+ * A charger will be enabled depending on the requested charger type that was
+ * detected previously.
+ */
+static void abx500_chargalg_start_charging(struct abx500_chargalg *di,
+ int vset, int iset)
+{
+ switch (di->chg_info.charger_type) {
+ case AC_CHG:
+ dev_dbg(di->dev,
+ "AC parameters: Vset %d, Ich %d\n", vset, iset);
+ abx500_chargalg_usb_en(di, false, 0, 0);
+ abx500_chargalg_ac_en(di, true, vset, iset);
+ break;
+
+ case USB_CHG:
+ dev_dbg(di->dev,
+ "USB parameters: Vset %d, Ich %d\n", vset, iset);
+ abx500_chargalg_ac_en(di, false, 0, 0);
+ abx500_chargalg_usb_en(di, true, vset, iset);
+ break;
+
+ default:
+ dev_err(di->dev, "Unknown charger to charge from\n");
+ break;
+ }
+}
+
+/**
+ * abx500_chargalg_check_temp() - Check battery temperature ranges
+ * @di: pointer to the abx500_chargalg structure
+ *
+ * The battery temperature is checked against the predefined limits and the
+ * charge state is changed accordingly
+ */
+static void abx500_chargalg_check_temp(struct abx500_chargalg *di)
+{
+ if (di->batt_data.temp > (di->bm->temp_low + di->t_hyst_norm) &&
+ di->batt_data.temp < (di->bm->temp_high - di->t_hyst_norm)) {
+ /* Temp OK! */
+ di->events.btemp_underover = false;
+ di->events.btemp_lowhigh = false;
+ di->t_hyst_norm = 0;
+ di->t_hyst_lowhigh = 0;
+ } else {
+ if (((di->batt_data.temp >= di->bm->temp_high) &&
+ (di->batt_data.temp <
+ (di->bm->temp_over - di->t_hyst_lowhigh))) ||
+ ((di->batt_data.temp >
+ (di->bm->temp_under + di->t_hyst_lowhigh)) &&
+ (di->batt_data.temp <= di->bm->temp_low))) {
+ /* TEMP minor!!!!! */
+ di->events.btemp_underover = false;
+ di->events.btemp_lowhigh = true;
+ di->t_hyst_norm = di->bm->temp_hysteresis;
+ di->t_hyst_lowhigh = 0;
+ } else if (di->batt_data.temp <= di->bm->temp_under ||
+ di->batt_data.temp >= di->bm->temp_over) {
+ /* TEMP major!!!!! */
+ di->events.btemp_underover = true;
+ di->events.btemp_lowhigh = false;
+ di->t_hyst_norm = 0;
+ di->t_hyst_lowhigh = di->bm->temp_hysteresis;
+ } else {
+ /* Within hysteresis */
+ dev_dbg(di->dev, "Within hysteresis limit temp: %d "
+ "hyst_lowhigh %d, hyst normal %d\n",
+ di->batt_data.temp, di->t_hyst_lowhigh,
+ di->t_hyst_norm);
+ }
+ }
+}
+
+/**
+ * abx500_chargalg_check_charger_voltage() - Check charger voltage
+ * @di: pointer to the abx500_chargalg structure
+ *
+ * Charger voltage is checked against maximum limit
+ */
+static void abx500_chargalg_check_charger_voltage(struct abx500_chargalg *di)
+{
+ if (di->chg_info.usb_volt > di->bm->chg_params->usb_volt_max)
+ di->chg_info.usb_chg_ok = false;
+ else
+ di->chg_info.usb_chg_ok = true;
+
+ if (di->chg_info.ac_volt > di->bm->chg_params->ac_volt_max)
+ di->chg_info.ac_chg_ok = false;
+ else
+ di->chg_info.ac_chg_ok = true;
+
+}
+
+/**
+ * abx500_chargalg_end_of_charge() - Check if end-of-charge criteria is fulfilled
+ * @di: pointer to the abx500_chargalg structure
+ *
+ * End-of-charge criteria is fulfilled when the battery voltage is above a
+ * certain limit and the battery current is below a certain limit for a
+ * predefined number of consecutive seconds. If true, the battery is full
+ */
+static void abx500_chargalg_end_of_charge(struct abx500_chargalg *di)
+{
+ if (di->charge_status == POWER_SUPPLY_STATUS_CHARGING &&
+ di->charge_state == STATE_NORMAL &&
+ !di->maintenance_chg && (di->batt_data.volt >=
+ di->bm->bat_type[di->bm->batt_id].termination_vol ||
+ di->events.usb_cv_active || di->events.ac_cv_active) &&
+ di->batt_data.avg_curr <
+ di->bm->bat_type[di->bm->batt_id].termination_curr &&
+ di->batt_data.avg_curr > 0) {
+ if (++di->eoc_cnt >= EOC_COND_CNT) {
+ di->eoc_cnt = 0;
+ di->charge_status = POWER_SUPPLY_STATUS_FULL;
+ di->maintenance_chg = true;
+ dev_dbg(di->dev, "EOC reached!\n");
+ power_supply_changed(di->chargalg_psy);
+ } else {
+ dev_dbg(di->dev,
+ " EOC limit reached for the %d"
+ " time, out of %d before EOC\n",
+ di->eoc_cnt,
+ EOC_COND_CNT);
+ }
+ } else {
+ di->eoc_cnt = 0;
+ }
+}
+
+static void init_maxim_chg_curr(struct abx500_chargalg *di)
+{
+ di->ccm.original_iset =
+ di->bm->bat_type[di->bm->batt_id].normal_cur_lvl;
+ di->ccm.current_iset =
+ di->bm->bat_type[di->bm->batt_id].normal_cur_lvl;
+ di->ccm.test_delta_i = di->bm->maxi->charger_curr_step;
+ di->ccm.max_current = di->bm->maxi->chg_curr;
+ di->ccm.condition_cnt = di->bm->maxi->wait_cycles;
+ di->ccm.level = 0;
+}
+
+/**
+ * abx500_chargalg_chg_curr_maxim - increases the charger current to
+ * compensate for the system load
+ * @di pointer to the abx500_chargalg structure
+ *
+ * This maximization function is used to raise the charger current to get the
+ * battery current as close to the optimal value as possible. The battery
+ * current during charging is affected by the system load
+ */
+static enum maxim_ret abx500_chargalg_chg_curr_maxim(struct abx500_chargalg *di)
+{
+ int delta_i;
+
+ if (!di->bm->maxi->ena_maxi)
+ return MAXIM_RET_NOACTION;
+
+ delta_i = di->ccm.original_iset - di->batt_data.inst_curr;
+
+ if (di->events.vbus_collapsed) {
+ dev_dbg(di->dev, "Charger voltage has collapsed %d\n",
+ di->ccm.wait_cnt);
+ if (di->ccm.wait_cnt == 0) {
+ dev_dbg(di->dev, "lowering current\n");
+ di->ccm.wait_cnt++;
+ di->ccm.condition_cnt = di->bm->maxi->wait_cycles;
+ di->ccm.max_current =
+ di->ccm.current_iset - di->ccm.test_delta_i;
+ di->ccm.current_iset = di->ccm.max_current;
+ di->ccm.level--;
+ return MAXIM_RET_CHANGE;
+ } else {
+ dev_dbg(di->dev, "waiting\n");
+ /* Let's go in here twice before lowering curr again */
+ di->ccm.wait_cnt = (di->ccm.wait_cnt + 1) % 3;
+ return MAXIM_RET_NOACTION;
+ }
+ }
+
+ di->ccm.wait_cnt = 0;
+
+ if ((di->batt_data.inst_curr > di->ccm.original_iset)) {
+ dev_dbg(di->dev, " Maximization Ibat (%dmA) too high"
+ " (limit %dmA) (current iset: %dmA)!\n",
+ di->batt_data.inst_curr, di->ccm.original_iset,
+ di->ccm.current_iset);
+
+ if (di->ccm.current_iset == di->ccm.original_iset)
+ return MAXIM_RET_NOACTION;
+
+ di->ccm.condition_cnt = di->bm->maxi->wait_cycles;
+ di->ccm.current_iset = di->ccm.original_iset;
+ di->ccm.level = 0;
+
+ return MAXIM_RET_IBAT_TOO_HIGH;
+ }
+
+ if (delta_i > di->ccm.test_delta_i &&
+ (di->ccm.current_iset + di->ccm.test_delta_i) <
+ di->ccm.max_current) {
+ if (di->ccm.condition_cnt-- == 0) {
+ /* Increse the iset with cco.test_delta_i */
+ di->ccm.condition_cnt = di->bm->maxi->wait_cycles;
+ di->ccm.current_iset += di->ccm.test_delta_i;
+ di->ccm.level++;
+ dev_dbg(di->dev, " Maximization needed, increase"
+ " with %d mA to %dmA (Optimal ibat: %d)"
+ " Level %d\n",
+ di->ccm.test_delta_i,
+ di->ccm.current_iset,
+ di->ccm.original_iset,
+ di->ccm.level);
+ return MAXIM_RET_CHANGE;
+ } else {
+ return MAXIM_RET_NOACTION;
+ }
+ } else {
+ di->ccm.condition_cnt = di->bm->maxi->wait_cycles;
+ return MAXIM_RET_NOACTION;
+ }
+}
+
+static void handle_maxim_chg_curr(struct abx500_chargalg *di)
+{
+ enum maxim_ret ret;
+ int result;
+
+ ret = abx500_chargalg_chg_curr_maxim(di);
+ switch (ret) {
+ case MAXIM_RET_CHANGE:
+ result = abx500_chargalg_update_chg_curr(di,
+ di->ccm.current_iset);
+ if (result)
+ dev_err(di->dev, "failed to set chg curr\n");
+ break;
+ case MAXIM_RET_IBAT_TOO_HIGH:
+ result = abx500_chargalg_update_chg_curr(di,
+ di->bm->bat_type[di->bm->batt_id].normal_cur_lvl);
+ if (result)
+ dev_err(di->dev, "failed to set chg curr\n");
+ break;
+
+ case MAXIM_RET_NOACTION:
+ default:
+ /* Do nothing..*/
+ break;
+ }
+}
+
+static int abx500_chargalg_get_ext_psy_data(struct device *dev, void *data)
+{
+ struct power_supply *psy;
+ struct power_supply *ext = dev_get_drvdata(dev);
+ const char **supplicants = (const char **)ext->supplied_to;
+ struct abx500_chargalg *di;
+ union power_supply_propval ret;
+ int j;
+ bool capacity_updated = false;
+
+ psy = (struct power_supply *)data;
+ di = power_supply_get_drvdata(psy);
+ /* For all psy where the driver name appears in any supplied_to */
+ j = match_string(supplicants, ext->num_supplicants, psy->desc->name);
+ if (j < 0)
+ return 0;
+
+ /*
+ * If external is not registering 'POWER_SUPPLY_PROP_CAPACITY' to its
+ * property because of handling that sysfs entry on its own, this is
+ * the place to get the battery capacity.
+ */
+ if (!power_supply_get_property(ext, POWER_SUPPLY_PROP_CAPACITY, &ret)) {
+ di->batt_data.percent = ret.intval;
+ capacity_updated = true;
+ }
+
+ /* Go through all properties for the psy */
+ for (j = 0; j < ext->desc->num_properties; j++) {
+ enum power_supply_property prop;
+ prop = ext->desc->properties[j];
+
+ /*
+ * Initialize chargers if not already done.
+ * The ab8500_charger*/
+ if (!di->ac_chg &&
+ ext->desc->type == POWER_SUPPLY_TYPE_MAINS)
+ di->ac_chg = psy_to_ux500_charger(ext);
+ else if (!di->usb_chg &&
+ ext->desc->type == POWER_SUPPLY_TYPE_USB)
+ di->usb_chg = psy_to_ux500_charger(ext);
+
+ if (power_supply_get_property(ext, prop, &ret))
+ continue;
+ switch (prop) {
+ case POWER_SUPPLY_PROP_PRESENT:
+ switch (ext->desc->type) {
+ case POWER_SUPPLY_TYPE_BATTERY:
+ /* Battery present */
+ if (ret.intval)
+ di->events.batt_rem = false;
+ /* Battery removed */
+ else
+ di->events.batt_rem = true;
+ break;
+ case POWER_SUPPLY_TYPE_MAINS:
+ /* AC disconnected */
+ if (!ret.intval &&
+ (di->chg_info.conn_chg & AC_CHG)) {
+ di->chg_info.prev_conn_chg =
+ di->chg_info.conn_chg;
+ di->chg_info.conn_chg &= ~AC_CHG;
+ }
+ /* AC connected */
+ else if (ret.intval &&
+ !(di->chg_info.conn_chg & AC_CHG)) {
+ di->chg_info.prev_conn_chg =
+ di->chg_info.conn_chg;
+ di->chg_info.conn_chg |= AC_CHG;
+ }
+ break;
+ case POWER_SUPPLY_TYPE_USB:
+ /* USB disconnected */
+ if (!ret.intval &&
+ (di->chg_info.conn_chg & USB_CHG)) {
+ di->chg_info.prev_conn_chg =
+ di->chg_info.conn_chg;
+ di->chg_info.conn_chg &= ~USB_CHG;
+ }
+ /* USB connected */
+ else if (ret.intval &&
+ !(di->chg_info.conn_chg & USB_CHG)) {
+ di->chg_info.prev_conn_chg =
+ di->chg_info.conn_chg;
+ di->chg_info.conn_chg |= USB_CHG;
+ }
+ break;
+ default:
+ break;
+ }
+ break;
+
+ case POWER_SUPPLY_PROP_ONLINE:
+ switch (ext->desc->type) {
+ case POWER_SUPPLY_TYPE_BATTERY:
+ break;
+ case POWER_SUPPLY_TYPE_MAINS:
+ /* AC offline */
+ if (!ret.intval &&
+ (di->chg_info.online_chg & AC_CHG)) {
+ di->chg_info.prev_online_chg =
+ di->chg_info.online_chg;
+ di->chg_info.online_chg &= ~AC_CHG;
+ }
+ /* AC online */
+ else if (ret.intval &&
+ !(di->chg_info.online_chg & AC_CHG)) {
+ di->chg_info.prev_online_chg =
+ di->chg_info.online_chg;
+ di->chg_info.online_chg |= AC_CHG;
+ queue_delayed_work(di->chargalg_wq,
+ &di->chargalg_wd_work, 0);
+ }
+ break;
+ case POWER_SUPPLY_TYPE_USB:
+ /* USB offline */
+ if (!ret.intval &&
+ (di->chg_info.online_chg & USB_CHG)) {
+ di->chg_info.prev_online_chg =
+ di->chg_info.online_chg;
+ di->chg_info.online_chg &= ~USB_CHG;
+ }
+ /* USB online */
+ else if (ret.intval &&
+ !(di->chg_info.online_chg & USB_CHG)) {
+ di->chg_info.prev_online_chg =
+ di->chg_info.online_chg;
+ di->chg_info.online_chg |= USB_CHG;
+ queue_delayed_work(di->chargalg_wq,
+ &di->chargalg_wd_work, 0);
+ }
+ break;
+ default:
+ break;
+ }
+ break;
+
+ case POWER_SUPPLY_PROP_HEALTH:
+ switch (ext->desc->type) {
+ case POWER_SUPPLY_TYPE_BATTERY:
+ break;
+ case POWER_SUPPLY_TYPE_MAINS:
+ switch (ret.intval) {
+ case POWER_SUPPLY_HEALTH_UNSPEC_FAILURE:
+ di->events.mainextchnotok = true;
+ di->events.main_thermal_prot = false;
+ di->events.main_ovv = false;
+ di->events.ac_wd_expired = false;
+ break;
+ case POWER_SUPPLY_HEALTH_DEAD:
+ di->events.ac_wd_expired = true;
+ di->events.mainextchnotok = false;
+ di->events.main_ovv = false;
+ di->events.main_thermal_prot = false;
+ break;
+ case POWER_SUPPLY_HEALTH_COLD:
+ case POWER_SUPPLY_HEALTH_OVERHEAT:
+ di->events.main_thermal_prot = true;
+ di->events.mainextchnotok = false;
+ di->events.main_ovv = false;
+ di->events.ac_wd_expired = false;
+ break;
+ case POWER_SUPPLY_HEALTH_OVERVOLTAGE:
+ di->events.main_ovv = true;
+ di->events.mainextchnotok = false;
+ di->events.main_thermal_prot = false;
+ di->events.ac_wd_expired = false;
+ break;
+ case POWER_SUPPLY_HEALTH_GOOD:
+ di->events.main_thermal_prot = false;
+ di->events.mainextchnotok = false;
+ di->events.main_ovv = false;
+ di->events.ac_wd_expired = false;
+ break;
+ default:
+ break;
+ }
+ break;
+
+ case POWER_SUPPLY_TYPE_USB:
+ switch (ret.intval) {
+ case POWER_SUPPLY_HEALTH_UNSPEC_FAILURE:
+ di->events.usbchargernotok = true;
+ di->events.usb_thermal_prot = false;
+ di->events.vbus_ovv = false;
+ di->events.usb_wd_expired = false;
+ break;
+ case POWER_SUPPLY_HEALTH_DEAD:
+ di->events.usb_wd_expired = true;
+ di->events.usbchargernotok = false;
+ di->events.usb_thermal_prot = false;
+ di->events.vbus_ovv = false;
+ break;
+ case POWER_SUPPLY_HEALTH_COLD:
+ case POWER_SUPPLY_HEALTH_OVERHEAT:
+ di->events.usb_thermal_prot = true;
+ di->events.usbchargernotok = false;
+ di->events.vbus_ovv = false;
+ di->events.usb_wd_expired = false;
+ break;
+ case POWER_SUPPLY_HEALTH_OVERVOLTAGE:
+ di->events.vbus_ovv = true;
+ di->events.usbchargernotok = false;
+ di->events.usb_thermal_prot = false;
+ di->events.usb_wd_expired = false;
+ break;
+ case POWER_SUPPLY_HEALTH_GOOD:
+ di->events.usbchargernotok = false;
+ di->events.usb_thermal_prot = false;
+ di->events.vbus_ovv = false;
+ di->events.usb_wd_expired = false;
+ break;
+ default:
+ break;
+ }
+ default:
+ break;
+ }
+ break;
+
+ case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+ switch (ext->desc->type) {
+ case POWER_SUPPLY_TYPE_BATTERY:
+ di->batt_data.volt = ret.intval / 1000;
+ break;
+ case POWER_SUPPLY_TYPE_MAINS:
+ di->chg_info.ac_volt = ret.intval / 1000;
+ break;
+ case POWER_SUPPLY_TYPE_USB:
+ di->chg_info.usb_volt = ret.intval / 1000;
+ break;
+ default:
+ break;
+ }
+ break;
+
+ case POWER_SUPPLY_PROP_VOLTAGE_AVG:
+ switch (ext->desc->type) {
+ case POWER_SUPPLY_TYPE_MAINS:
+ /* AVG is used to indicate when we are
+ * in CV mode */
+ if (ret.intval)
+ di->events.ac_cv_active = true;
+ else
+ di->events.ac_cv_active = false;
+
+ break;
+ case POWER_SUPPLY_TYPE_USB:
+ /* AVG is used to indicate when we are
+ * in CV mode */
+ if (ret.intval)
+ di->events.usb_cv_active = true;
+ else
+ di->events.usb_cv_active = false;
+
+ break;
+ default:
+ break;
+ }
+ break;
+
+ case POWER_SUPPLY_PROP_TECHNOLOGY:
+ switch (ext->desc->type) {
+ case POWER_SUPPLY_TYPE_BATTERY:
+ if (ret.intval)
+ di->events.batt_unknown = false;
+ else
+ di->events.batt_unknown = true;
+
+ break;
+ default:
+ break;
+ }
+ break;
+
+ case POWER_SUPPLY_PROP_TEMP:
+ di->batt_data.temp = ret.intval / 10;
+ break;
+
+ case POWER_SUPPLY_PROP_CURRENT_NOW:
+ switch (ext->desc->type) {
+ case POWER_SUPPLY_TYPE_MAINS:
+ di->chg_info.ac_curr =
+ ret.intval / 1000;
+ break;
+ case POWER_SUPPLY_TYPE_USB:
+ di->chg_info.usb_curr =
+ ret.intval / 1000;
+ break;
+ case POWER_SUPPLY_TYPE_BATTERY:
+ di->batt_data.inst_curr = ret.intval / 1000;
+ break;
+ default:
+ break;
+ }
+ break;
+
+ case POWER_SUPPLY_PROP_CURRENT_AVG:
+ switch (ext->desc->type) {
+ case POWER_SUPPLY_TYPE_BATTERY:
+ di->batt_data.avg_curr = ret.intval / 1000;
+ break;
+ case POWER_SUPPLY_TYPE_USB:
+ if (ret.intval)
+ di->events.vbus_collapsed = true;
+ else
+ di->events.vbus_collapsed = false;
+ break;
+ default:
+ break;
+ }
+ break;
+ case POWER_SUPPLY_PROP_CAPACITY:
+ if (!capacity_updated)
+ di->batt_data.percent = ret.intval;
+ break;
+ default:
+ break;
+ }
+ }
+ return 0;
+}
+
+/**
+ * abx500_chargalg_external_power_changed() - callback for power supply changes
+ * @psy: pointer to the structure power_supply
+ *
+ * This function is the entry point of the pointer external_power_changed
+ * of the structure power_supply.
+ * This function gets executed when there is a change in any external power
+ * supply that this driver needs to be notified of.
+ */
+static void abx500_chargalg_external_power_changed(struct power_supply *psy)
+{
+ struct abx500_chargalg *di = power_supply_get_drvdata(psy);
+
+ /*
+ * Trigger execution of the algorithm instantly and read
+ * all power_supply properties there instead
+ */
+ queue_work(di->chargalg_wq, &di->chargalg_work);
+}
+
+/**
+ * abx500_chargalg_algorithm() - Main function for the algorithm
+ * @di: pointer to the abx500_chargalg structure
+ *
+ * This is the main control function for the charging algorithm.
+ * It is called periodically or when something happens that will
+ * trigger a state change
+ */
+static void abx500_chargalg_algorithm(struct abx500_chargalg *di)
+{
+ int charger_status;
+ int ret;
+ int curr_step_lvl;
+
+ /* Collect data from all power_supply class devices */
+ class_for_each_device(power_supply_class, NULL,
+ di->chargalg_psy, abx500_chargalg_get_ext_psy_data);
+
+ abx500_chargalg_end_of_charge(di);
+ abx500_chargalg_check_temp(di);
+ abx500_chargalg_check_charger_voltage(di);
+
+ charger_status = abx500_chargalg_check_charger_connection(di);
+ abx500_chargalg_check_current_step_status(di);
+
+ if (is_ab8500(di->parent)) {
+ ret = abx500_chargalg_check_charger_enable(di);
+ if (ret < 0)
+ dev_err(di->dev, "Checking charger is enabled error"
+ ": Returned Value %d\n", ret);
+ }
+
+ /*
+ * First check if we have a charger connected.
+ * Also we don't allow charging of unknown batteries if configured
+ * this way
+ */
+ if (!charger_status ||
+ (di->events.batt_unknown && !di->bm->chg_unknown_bat)) {
+ if (di->charge_state != STATE_HANDHELD) {
+ di->events.safety_timer_expired = false;
+ abx500_chargalg_state_to(di, STATE_HANDHELD_INIT);
+ }
+ }
+
+ /* If suspended, we should not continue checking the flags */
+ else if (di->charge_state == STATE_SUSPENDED_INIT ||
+ di->charge_state == STATE_SUSPENDED) {
+ /* We don't do anything here, just don,t continue */
+ }
+
+ /* Safety timer expiration */
+ else if (di->events.safety_timer_expired) {
+ if (di->charge_state != STATE_SAFETY_TIMER_EXPIRED)
+ abx500_chargalg_state_to(di,
+ STATE_SAFETY_TIMER_EXPIRED_INIT);
+ }
+ /*
+ * Check if any interrupts has occured
+ * that will prevent us from charging
+ */
+
+ /* Battery removed */
+ else if (di->events.batt_rem) {
+ if (di->charge_state != STATE_BATT_REMOVED)
+ abx500_chargalg_state_to(di, STATE_BATT_REMOVED_INIT);
+ }
+ /* Main or USB charger not ok. */
+ else if (di->events.mainextchnotok || di->events.usbchargernotok) {
+ /*
+ * If vbus_collapsed is set, we have to lower the charger
+ * current, which is done in the normal state below
+ */
+ if (di->charge_state != STATE_CHG_NOT_OK &&
+ !di->events.vbus_collapsed)
+ abx500_chargalg_state_to(di, STATE_CHG_NOT_OK_INIT);
+ }
+ /* VBUS, Main or VBAT OVV. */
+ else if (di->events.vbus_ovv ||
+ di->events.main_ovv ||
+ di->events.batt_ovv ||
+ !di->chg_info.usb_chg_ok ||
+ !di->chg_info.ac_chg_ok) {
+ if (di->charge_state != STATE_OVV_PROTECT)
+ abx500_chargalg_state_to(di, STATE_OVV_PROTECT_INIT);
+ }
+ /* USB Thermal, stop charging */
+ else if (di->events.main_thermal_prot ||
+ di->events.usb_thermal_prot) {
+ if (di->charge_state != STATE_HW_TEMP_PROTECT)
+ abx500_chargalg_state_to(di,
+ STATE_HW_TEMP_PROTECT_INIT);
+ }
+ /* Battery temp over/under */
+ else if (di->events.btemp_underover) {
+ if (di->charge_state != STATE_TEMP_UNDEROVER)
+ abx500_chargalg_state_to(di,
+ STATE_TEMP_UNDEROVER_INIT);
+ }
+ /* Watchdog expired */
+ else if (di->events.ac_wd_expired ||
+ di->events.usb_wd_expired) {
+ if (di->charge_state != STATE_WD_EXPIRED)
+ abx500_chargalg_state_to(di, STATE_WD_EXPIRED_INIT);
+ }
+ /* Battery temp high/low */
+ else if (di->events.btemp_lowhigh) {
+ if (di->charge_state != STATE_TEMP_LOWHIGH)
+ abx500_chargalg_state_to(di, STATE_TEMP_LOWHIGH_INIT);
+ }
+
+ dev_dbg(di->dev,
+ "[CHARGALG] Vb %d Ib_avg %d Ib_inst %d Tb %d Cap %d Maint %d "
+ "State %s Active_chg %d Chg_status %d AC %d USB %d "
+ "AC_online %d USB_online %d AC_CV %d USB_CV %d AC_I %d "
+ "USB_I %d AC_Vset %d AC_Iset %d USB_Vset %d USB_Iset %d\n",
+ di->batt_data.volt,
+ di->batt_data.avg_curr,
+ di->batt_data.inst_curr,
+ di->batt_data.temp,
+ di->batt_data.percent,
+ di->maintenance_chg,
+ states[di->charge_state],
+ di->chg_info.charger_type,
+ di->charge_status,
+ di->chg_info.conn_chg & AC_CHG,
+ di->chg_info.conn_chg & USB_CHG,
+ di->chg_info.online_chg & AC_CHG,
+ di->chg_info.online_chg & USB_CHG,
+ di->events.ac_cv_active,
+ di->events.usb_cv_active,
+ di->chg_info.ac_curr,
+ di->chg_info.usb_curr,
+ di->chg_info.ac_vset,
+ di->chg_info.ac_iset,
+ di->chg_info.usb_vset,
+ di->chg_info.usb_iset);
+
+ switch (di->charge_state) {
+ case STATE_HANDHELD_INIT:
+ abx500_chargalg_stop_charging(di);
+ di->charge_status = POWER_SUPPLY_STATUS_DISCHARGING;
+ abx500_chargalg_state_to(di, STATE_HANDHELD);
+ fallthrough;
+
+ case STATE_HANDHELD:
+ break;
+
+ case STATE_SUSPENDED_INIT:
+ if (di->susp_status.ac_suspended)
+ abx500_chargalg_ac_en(di, false, 0, 0);
+ if (di->susp_status.usb_suspended)
+ abx500_chargalg_usb_en(di, false, 0, 0);
+ abx500_chargalg_stop_safety_timer(di);
+ abx500_chargalg_stop_maintenance_timer(di);
+ di->charge_status = POWER_SUPPLY_STATUS_NOT_CHARGING;
+ di->maintenance_chg = false;
+ abx500_chargalg_state_to(di, STATE_SUSPENDED);
+ power_supply_changed(di->chargalg_psy);
+ fallthrough;
+
+ case STATE_SUSPENDED:
+ /* CHARGING is suspended */
+ break;
+
+ case STATE_BATT_REMOVED_INIT:
+ abx500_chargalg_stop_charging(di);
+ abx500_chargalg_state_to(di, STATE_BATT_REMOVED);
+ fallthrough;
+
+ case STATE_BATT_REMOVED:
+ if (!di->events.batt_rem)
+ abx500_chargalg_state_to(di, STATE_NORMAL_INIT);
+ break;
+
+ case STATE_HW_TEMP_PROTECT_INIT:
+ abx500_chargalg_stop_charging(di);
+ abx500_chargalg_state_to(di, STATE_HW_TEMP_PROTECT);
+ fallthrough;
+
+ case STATE_HW_TEMP_PROTECT:
+ if (!di->events.main_thermal_prot &&
+ !di->events.usb_thermal_prot)
+ abx500_chargalg_state_to(di, STATE_NORMAL_INIT);
+ break;
+
+ case STATE_OVV_PROTECT_INIT:
+ abx500_chargalg_stop_charging(di);
+ abx500_chargalg_state_to(di, STATE_OVV_PROTECT);
+ fallthrough;
+
+ case STATE_OVV_PROTECT:
+ if (!di->events.vbus_ovv &&
+ !di->events.main_ovv &&
+ !di->events.batt_ovv &&
+ di->chg_info.usb_chg_ok &&
+ di->chg_info.ac_chg_ok)
+ abx500_chargalg_state_to(di, STATE_NORMAL_INIT);
+ break;
+
+ case STATE_CHG_NOT_OK_INIT:
+ abx500_chargalg_stop_charging(di);
+ abx500_chargalg_state_to(di, STATE_CHG_NOT_OK);
+ fallthrough;
+
+ case STATE_CHG_NOT_OK:
+ if (!di->events.mainextchnotok &&
+ !di->events.usbchargernotok)
+ abx500_chargalg_state_to(di, STATE_NORMAL_INIT);
+ break;
+
+ case STATE_SAFETY_TIMER_EXPIRED_INIT:
+ abx500_chargalg_stop_charging(di);
+ abx500_chargalg_state_to(di, STATE_SAFETY_TIMER_EXPIRED);
+ fallthrough;
+
+ case STATE_SAFETY_TIMER_EXPIRED:
+ /* We exit this state when charger is removed */
+ break;
+
+ case STATE_NORMAL_INIT:
+ if (di->curr_status.curr_step == CHARGALG_CURR_STEP_LOW)
+ abx500_chargalg_stop_charging(di);
+ else {
+ curr_step_lvl = di->bm->bat_type[
+ di->bm->batt_id].normal_cur_lvl
+ * di->curr_status.curr_step
+ / CHARGALG_CURR_STEP_HIGH;
+ abx500_chargalg_start_charging(di,
+ di->bm->bat_type[di->bm->batt_id]
+ .normal_vol_lvl, curr_step_lvl);
+ }
+
+ abx500_chargalg_state_to(di, STATE_NORMAL);
+ abx500_chargalg_start_safety_timer(di);
+ abx500_chargalg_stop_maintenance_timer(di);
+ init_maxim_chg_curr(di);
+ di->charge_status = POWER_SUPPLY_STATUS_CHARGING;
+ di->eoc_cnt = 0;
+ di->maintenance_chg = false;
+ power_supply_changed(di->chargalg_psy);
+
+ break;
+
+ case STATE_NORMAL:
+ handle_maxim_chg_curr(di);
+ if (di->charge_status == POWER_SUPPLY_STATUS_FULL &&
+ di->maintenance_chg) {
+ if (di->bm->no_maintenance)
+ abx500_chargalg_state_to(di,
+ STATE_WAIT_FOR_RECHARGE_INIT);
+ else
+ abx500_chargalg_state_to(di,
+ STATE_MAINTENANCE_A_INIT);
+ }
+ break;
+
+ /* This state will be used when the maintenance state is disabled */
+ case STATE_WAIT_FOR_RECHARGE_INIT:
+ abx500_chargalg_hold_charging(di);
+ abx500_chargalg_state_to(di, STATE_WAIT_FOR_RECHARGE);
+ fallthrough;
+
+ case STATE_WAIT_FOR_RECHARGE:
+ if (di->batt_data.percent <=
+ di->bm->bat_type[di->bm->batt_id].
+ recharge_cap)
+ abx500_chargalg_state_to(di, STATE_NORMAL_INIT);
+ break;
+
+ case STATE_MAINTENANCE_A_INIT:
+ abx500_chargalg_stop_safety_timer(di);
+ abx500_chargalg_start_maintenance_timer(di,
+ di->bm->bat_type[
+ di->bm->batt_id].maint_a_chg_timer_h);
+ abx500_chargalg_start_charging(di,
+ di->bm->bat_type[
+ di->bm->batt_id].maint_a_vol_lvl,
+ di->bm->bat_type[
+ di->bm->batt_id].maint_a_cur_lvl);
+ abx500_chargalg_state_to(di, STATE_MAINTENANCE_A);
+ power_supply_changed(di->chargalg_psy);
+ fallthrough;
+
+ case STATE_MAINTENANCE_A:
+ if (di->events.maintenance_timer_expired) {
+ abx500_chargalg_stop_maintenance_timer(di);
+ abx500_chargalg_state_to(di, STATE_MAINTENANCE_B_INIT);
+ }
+ break;
+
+ case STATE_MAINTENANCE_B_INIT:
+ abx500_chargalg_start_maintenance_timer(di,
+ di->bm->bat_type[
+ di->bm->batt_id].maint_b_chg_timer_h);
+ abx500_chargalg_start_charging(di,
+ di->bm->bat_type[
+ di->bm->batt_id].maint_b_vol_lvl,
+ di->bm->bat_type[
+ di->bm->batt_id].maint_b_cur_lvl);
+ abx500_chargalg_state_to(di, STATE_MAINTENANCE_B);
+ power_supply_changed(di->chargalg_psy);
+ fallthrough;
+
+ case STATE_MAINTENANCE_B:
+ if (di->events.maintenance_timer_expired) {
+ abx500_chargalg_stop_maintenance_timer(di);
+ abx500_chargalg_state_to(di, STATE_NORMAL_INIT);
+ }
+ break;
+
+ case STATE_TEMP_LOWHIGH_INIT:
+ abx500_chargalg_start_charging(di,
+ di->bm->bat_type[
+ di->bm->batt_id].low_high_vol_lvl,
+ di->bm->bat_type[
+ di->bm->batt_id].low_high_cur_lvl);
+ abx500_chargalg_stop_maintenance_timer(di);
+ di->charge_status = POWER_SUPPLY_STATUS_CHARGING;
+ abx500_chargalg_state_to(di, STATE_TEMP_LOWHIGH);
+ power_supply_changed(di->chargalg_psy);
+ fallthrough;
+
+ case STATE_TEMP_LOWHIGH:
+ if (!di->events.btemp_lowhigh)
+ abx500_chargalg_state_to(di, STATE_NORMAL_INIT);
+ break;
+
+ case STATE_WD_EXPIRED_INIT:
+ abx500_chargalg_stop_charging(di);
+ abx500_chargalg_state_to(di, STATE_WD_EXPIRED);
+ fallthrough;
+
+ case STATE_WD_EXPIRED:
+ if (!di->events.ac_wd_expired &&
+ !di->events.usb_wd_expired)
+ abx500_chargalg_state_to(di, STATE_NORMAL_INIT);
+ break;
+
+ case STATE_TEMP_UNDEROVER_INIT:
+ abx500_chargalg_stop_charging(di);
+ abx500_chargalg_state_to(di, STATE_TEMP_UNDEROVER);
+ fallthrough;
+
+ case STATE_TEMP_UNDEROVER:
+ if (!di->events.btemp_underover)
+ abx500_chargalg_state_to(di, STATE_NORMAL_INIT);
+ break;
+ }
+
+ /* Start charging directly if the new state is a charge state */
+ if (di->charge_state == STATE_NORMAL_INIT ||
+ di->charge_state == STATE_MAINTENANCE_A_INIT ||
+ di->charge_state == STATE_MAINTENANCE_B_INIT)
+ queue_work(di->chargalg_wq, &di->chargalg_work);
+}
+
+/**
+ * abx500_chargalg_periodic_work() - Periodic work for the algorithm
+ * @work: pointer to the work_struct structure
+ *
+ * Work queue function for the charging algorithm
+ */
+static void abx500_chargalg_periodic_work(struct work_struct *work)
+{
+ struct abx500_chargalg *di = container_of(work,
+ struct abx500_chargalg, chargalg_periodic_work.work);
+
+ abx500_chargalg_algorithm(di);
+
+ /*
+ * If a charger is connected then the battery has to be monitored
+ * frequently, else the work can be delayed.
+ */
+ if (di->chg_info.conn_chg)
+ queue_delayed_work(di->chargalg_wq,
+ &di->chargalg_periodic_work,
+ di->bm->interval_charging * HZ);
+ else
+ queue_delayed_work(di->chargalg_wq,
+ &di->chargalg_periodic_work,
+ di->bm->interval_not_charging * HZ);
+}
+
+/**
+ * abx500_chargalg_wd_work() - periodic work to kick the charger watchdog
+ * @work: pointer to the work_struct structure
+ *
+ * Work queue function for kicking the charger watchdog
+ */
+static void abx500_chargalg_wd_work(struct work_struct *work)
+{
+ int ret;
+ struct abx500_chargalg *di = container_of(work,
+ struct abx500_chargalg, chargalg_wd_work.work);
+
+ dev_dbg(di->dev, "abx500_chargalg_wd_work\n");
+
+ ret = abx500_chargalg_kick_watchdog(di);
+ if (ret < 0)
+ dev_err(di->dev, "failed to kick watchdog\n");
+
+ queue_delayed_work(di->chargalg_wq,
+ &di->chargalg_wd_work, CHG_WD_INTERVAL);
+}
+
+/**
+ * abx500_chargalg_work() - Work to run the charging algorithm instantly
+ * @work: pointer to the work_struct structure
+ *
+ * Work queue function for calling the charging algorithm
+ */
+static void abx500_chargalg_work(struct work_struct *work)
+{
+ struct abx500_chargalg *di = container_of(work,
+ struct abx500_chargalg, chargalg_work);
+
+ abx500_chargalg_algorithm(di);
+}
+
+/**
+ * abx500_chargalg_get_property() - get the chargalg properties
+ * @psy: pointer to the power_supply structure
+ * @psp: pointer to the power_supply_property structure
+ * @val: pointer to the power_supply_propval union
+ *
+ * This function gets called when an application tries to get the
+ * chargalg properties by reading the sysfs files.
+ * status: charging/discharging/full/unknown
+ * health: health of the battery
+ * Returns error code in case of failure else 0 on success
+ */
+static int abx500_chargalg_get_property(struct power_supply *psy,
+ enum power_supply_property psp,
+ union power_supply_propval *val)
+{
+ struct abx500_chargalg *di = power_supply_get_drvdata(psy);
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_STATUS:
+ val->intval = di->charge_status;
+ break;
+ case POWER_SUPPLY_PROP_HEALTH:
+ if (di->events.batt_ovv) {
+ val->intval = POWER_SUPPLY_HEALTH_OVERVOLTAGE;
+ } else if (di->events.btemp_underover) {
+ if (di->batt_data.temp <= di->bm->temp_under)
+ val->intval = POWER_SUPPLY_HEALTH_COLD;
+ else
+ val->intval = POWER_SUPPLY_HEALTH_OVERHEAT;
+ } else if (di->charge_state == STATE_SAFETY_TIMER_EXPIRED ||
+ di->charge_state == STATE_SAFETY_TIMER_EXPIRED_INIT) {
+ val->intval = POWER_SUPPLY_HEALTH_UNSPEC_FAILURE;
+ } else {
+ val->intval = POWER_SUPPLY_HEALTH_GOOD;
+ }
+ break;
+ default:
+ return -EINVAL;
+ }
+ return 0;
+}
+
+/* Exposure to the sysfs interface */
+
+static ssize_t abx500_chargalg_curr_step_show(struct abx500_chargalg *di,
+ char *buf)
+{
+ return sprintf(buf, "%d\n", di->curr_status.curr_step);
+}
+
+static ssize_t abx500_chargalg_curr_step_store(struct abx500_chargalg *di,
+ const char *buf, size_t length)
+{
+ long int param;
+ int ret;
+
+ ret = kstrtol(buf, 10, &param);
+ if (ret < 0)
+ return ret;
+
+ di->curr_status.curr_step = param;
+ if (di->curr_status.curr_step >= CHARGALG_CURR_STEP_LOW &&
+ di->curr_status.curr_step <= CHARGALG_CURR_STEP_HIGH) {
+ di->curr_status.curr_step_change = true;
+ queue_work(di->chargalg_wq, &di->chargalg_work);
+ } else
+ dev_info(di->dev, "Wrong current step\n"
+ "Enter 0. Disable AC/USB Charging\n"
+ "1--100. Set AC/USB charging current step\n"
+ "100. Enable AC/USB Charging\n");
+
+ return strlen(buf);
+}
+
+
+static ssize_t abx500_chargalg_en_show(struct abx500_chargalg *di,
+ char *buf)
+{
+ return sprintf(buf, "%d\n",
+ di->susp_status.ac_suspended &&
+ di->susp_status.usb_suspended);
+}
+
+static ssize_t abx500_chargalg_en_store(struct abx500_chargalg *di,
+ const char *buf, size_t length)
+{
+ long int param;
+ int ac_usb;
+ int ret;
+
+ ret = kstrtol(buf, 10, &param);
+ if (ret < 0)
+ return ret;
+
+ ac_usb = param;
+ switch (ac_usb) {
+ case 0:
+ /* Disable charging */
+ di->susp_status.ac_suspended = true;
+ di->susp_status.usb_suspended = true;
+ di->susp_status.suspended_change = true;
+ /* Trigger a state change */
+ queue_work(di->chargalg_wq,
+ &di->chargalg_work);
+ break;
+ case 1:
+ /* Enable AC Charging */
+ di->susp_status.ac_suspended = false;
+ di->susp_status.suspended_change = true;
+ /* Trigger a state change */
+ queue_work(di->chargalg_wq,
+ &di->chargalg_work);
+ break;
+ case 2:
+ /* Enable USB charging */
+ di->susp_status.usb_suspended = false;
+ di->susp_status.suspended_change = true;
+ /* Trigger a state change */
+ queue_work(di->chargalg_wq,
+ &di->chargalg_work);
+ break;
+ default:
+ dev_info(di->dev, "Wrong input\n"
+ "Enter 0. Disable AC/USB Charging\n"
+ "1. Enable AC charging\n"
+ "2. Enable USB Charging\n");
+ }
+ return strlen(buf);
+}
+
+static struct abx500_chargalg_sysfs_entry abx500_chargalg_en_charger =
+ __ATTR(chargalg, 0644, abx500_chargalg_en_show,
+ abx500_chargalg_en_store);
+
+static struct abx500_chargalg_sysfs_entry abx500_chargalg_curr_step =
+ __ATTR(chargalg_curr_step, 0644, abx500_chargalg_curr_step_show,
+ abx500_chargalg_curr_step_store);
+
+static ssize_t abx500_chargalg_sysfs_show(struct kobject *kobj,
+ struct attribute *attr, char *buf)
+{
+ struct abx500_chargalg_sysfs_entry *entry = container_of(attr,
+ struct abx500_chargalg_sysfs_entry, attr);
+
+ struct abx500_chargalg *di = container_of(kobj,
+ struct abx500_chargalg, chargalg_kobject);
+
+ if (!entry->show)
+ return -EIO;
+
+ return entry->show(di, buf);
+}
+
+static ssize_t abx500_chargalg_sysfs_charger(struct kobject *kobj,
+ struct attribute *attr, const char *buf, size_t length)
+{
+ struct abx500_chargalg_sysfs_entry *entry = container_of(attr,
+ struct abx500_chargalg_sysfs_entry, attr);
+
+ struct abx500_chargalg *di = container_of(kobj,
+ struct abx500_chargalg, chargalg_kobject);
+
+ if (!entry->store)
+ return -EIO;
+
+ return entry->store(di, buf, length);
+}
+
+static struct attribute *abx500_chargalg_chg[] = {
+ &abx500_chargalg_en_charger.attr,
+ &abx500_chargalg_curr_step.attr,
+ NULL,
+};
+
+static const struct sysfs_ops abx500_chargalg_sysfs_ops = {
+ .show = abx500_chargalg_sysfs_show,
+ .store = abx500_chargalg_sysfs_charger,
+};
+
+static struct kobj_type abx500_chargalg_ktype = {
+ .sysfs_ops = &abx500_chargalg_sysfs_ops,
+ .default_attrs = abx500_chargalg_chg,
+};
+
+/**
+ * abx500_chargalg_sysfs_exit() - de-init of sysfs entry
+ * @di: pointer to the struct abx500_chargalg
+ *
+ * This function removes the entry in sysfs.
+ */
+static void abx500_chargalg_sysfs_exit(struct abx500_chargalg *di)
+{
+ kobject_del(&di->chargalg_kobject);
+}
+
+/**
+ * abx500_chargalg_sysfs_init() - init of sysfs entry
+ * @di: pointer to the struct abx500_chargalg
+ *
+ * This function adds an entry in sysfs.
+ * Returns error code in case of failure else 0(on success)
+ */
+static int abx500_chargalg_sysfs_init(struct abx500_chargalg *di)
+{
+ int ret = 0;
+
+ ret = kobject_init_and_add(&di->chargalg_kobject,
+ &abx500_chargalg_ktype,
+ NULL, "abx500_chargalg");
+ if (ret < 0)
+ dev_err(di->dev, "failed to create sysfs entry\n");
+
+ return ret;
+}
+/* Exposure to the sysfs interface <<END>> */
+
+#if defined(CONFIG_PM)
+static int abx500_chargalg_resume(struct platform_device *pdev)
+{
+ struct abx500_chargalg *di = platform_get_drvdata(pdev);
+
+ /* Kick charger watchdog if charging (any charger online) */
+ if (di->chg_info.online_chg)
+ queue_delayed_work(di->chargalg_wq, &di->chargalg_wd_work, 0);
+
+ /*
+ * Run the charging algorithm directly to be sure we don't
+ * do it too seldom
+ */
+ queue_delayed_work(di->chargalg_wq, &di->chargalg_periodic_work, 0);
+
+ return 0;
+}
+
+static int abx500_chargalg_suspend(struct platform_device *pdev,
+ pm_message_t state)
+{
+ struct abx500_chargalg *di = platform_get_drvdata(pdev);
+
+ if (di->chg_info.online_chg)
+ cancel_delayed_work_sync(&di->chargalg_wd_work);
+
+ cancel_delayed_work_sync(&di->chargalg_periodic_work);
+
+ return 0;
+}
+#else
+#define abx500_chargalg_suspend NULL
+#define abx500_chargalg_resume NULL
+#endif
+
+static int abx500_chargalg_remove(struct platform_device *pdev)
+{
+ struct abx500_chargalg *di = platform_get_drvdata(pdev);
+
+ /* sysfs interface to enable/disbale charging from user space */
+ abx500_chargalg_sysfs_exit(di);
+
+ hrtimer_cancel(&di->safety_timer);
+ hrtimer_cancel(&di->maintenance_timer);
+
+ cancel_delayed_work_sync(&di->chargalg_periodic_work);
+ cancel_delayed_work_sync(&di->chargalg_wd_work);
+ cancel_work_sync(&di->chargalg_work);
+
+ /* Delete the work queue */
+ destroy_workqueue(di->chargalg_wq);
+
+ power_supply_unregister(di->chargalg_psy);
+
+ return 0;
+}
+
+static char *supply_interface[] = {
+ "ab8500_fg",
+};
+
+static const struct power_supply_desc abx500_chargalg_desc = {
+ .name = "abx500_chargalg",
+ .type = POWER_SUPPLY_TYPE_BATTERY,
+ .properties = abx500_chargalg_props,
+ .num_properties = ARRAY_SIZE(abx500_chargalg_props),
+ .get_property = abx500_chargalg_get_property,
+ .external_power_changed = abx500_chargalg_external_power_changed,
+};
+
+static int abx500_chargalg_probe(struct platform_device *pdev)
+{
+ struct device_node *np = pdev->dev.of_node;
+ struct abx500_bm_data *plat = pdev->dev.platform_data;
+ struct power_supply_config psy_cfg = {};
+ struct abx500_chargalg *di;
+ int ret = 0;
+
+ di = devm_kzalloc(&pdev->dev, sizeof(*di), GFP_KERNEL);
+ if (!di) {
+ dev_err(&pdev->dev, "%s no mem for ab8500_chargalg\n", __func__);
+ return -ENOMEM;
+ }
+
+ if (!plat) {
+ dev_err(&pdev->dev, "no battery management data supplied\n");
+ return -EINVAL;
+ }
+ di->bm = plat;
+
+ if (np) {
+ ret = ab8500_bm_of_probe(&pdev->dev, np, di->bm);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to get battery information\n");
+ return ret;
+ }
+ }
+
+ /* get device struct and parent */
+ di->dev = &pdev->dev;
+ di->parent = dev_get_drvdata(pdev->dev.parent);
+
+ psy_cfg.supplied_to = supply_interface;
+ psy_cfg.num_supplicants = ARRAY_SIZE(supply_interface);
+ psy_cfg.drv_data = di;
+
+ /* Initilialize safety timer */
+ hrtimer_init(&di->safety_timer, CLOCK_REALTIME, HRTIMER_MODE_ABS);
+ di->safety_timer.function = abx500_chargalg_safety_timer_expired;
+
+ /* Initilialize maintenance timer */
+ hrtimer_init(&di->maintenance_timer, CLOCK_REALTIME, HRTIMER_MODE_ABS);
+ di->maintenance_timer.function =
+ abx500_chargalg_maintenance_timer_expired;
+
+ /* Create a work queue for the chargalg */
+ di->chargalg_wq = alloc_ordered_workqueue("abx500_chargalg_wq",
+ WQ_MEM_RECLAIM);
+ if (di->chargalg_wq == NULL) {
+ dev_err(di->dev, "failed to create work queue\n");
+ return -ENOMEM;
+ }
+
+ /* Init work for chargalg */
+ INIT_DEFERRABLE_WORK(&di->chargalg_periodic_work,
+ abx500_chargalg_periodic_work);
+ INIT_DEFERRABLE_WORK(&di->chargalg_wd_work,
+ abx500_chargalg_wd_work);
+
+ /* Init work for chargalg */
+ INIT_WORK(&di->chargalg_work, abx500_chargalg_work);
+
+ /* To detect charger at startup */
+ di->chg_info.prev_conn_chg = -1;
+
+ /* Register chargalg power supply class */
+ di->chargalg_psy = power_supply_register(di->dev, &abx500_chargalg_desc,
+ &psy_cfg);
+ if (IS_ERR(di->chargalg_psy)) {
+ dev_err(di->dev, "failed to register chargalg psy\n");
+ ret = PTR_ERR(di->chargalg_psy);
+ goto free_chargalg_wq;
+ }
+
+ platform_set_drvdata(pdev, di);
+
+ /* sysfs interface to enable/disable charging from user space */
+ ret = abx500_chargalg_sysfs_init(di);
+ if (ret) {
+ dev_err(di->dev, "failed to create sysfs entry\n");
+ goto free_psy;
+ }
+ di->curr_status.curr_step = CHARGALG_CURR_STEP_HIGH;
+
+ /* Run the charging algorithm */
+ queue_delayed_work(di->chargalg_wq, &di->chargalg_periodic_work, 0);
+
+ dev_info(di->dev, "probe success\n");
+ return ret;
+
+free_psy:
+ power_supply_unregister(di->chargalg_psy);
+free_chargalg_wq:
+ destroy_workqueue(di->chargalg_wq);
+ return ret;
+}
+
+static const struct of_device_id ab8500_chargalg_match[] = {
+ { .compatible = "stericsson,ab8500-chargalg", },
+ { },
+};
+
+static struct platform_driver abx500_chargalg_driver = {
+ .probe = abx500_chargalg_probe,
+ .remove = abx500_chargalg_remove,
+ .suspend = abx500_chargalg_suspend,
+ .resume = abx500_chargalg_resume,
+ .driver = {
+ .name = "ab8500-chargalg",
+ .of_match_table = ab8500_chargalg_match,
+ },
+};
+
+module_platform_driver(abx500_chargalg_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Johan Palsson, Karl Komierowski");
+MODULE_ALIAS("platform:abx500-chargalg");
+MODULE_DESCRIPTION("abx500 battery charging algorithm");
diff --git a/drivers/power/supply/act8945a_charger.c b/drivers/power/supply/act8945a_charger.c
new file mode 100644
index 000000000..5f3eb6941
--- /dev/null
+++ b/drivers/power/supply/act8945a_charger.c
@@ -0,0 +1,662 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Power supply driver for the Active-semi ACT8945A PMIC
+ *
+ * Copyright (C) 2015 Atmel Corporation
+ *
+ * Author: Wenyou Yang <wenyou.yang@atmel.com>
+ */
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_irq.h>
+#include <linux/platform_device.h>
+#include <linux/power_supply.h>
+#include <linux/regmap.h>
+#include <linux/gpio/consumer.h>
+
+static const char *act8945a_charger_model = "ACT8945A";
+static const char *act8945a_charger_manufacturer = "Active-semi";
+
+/**
+ * ACT8945A Charger Register Map
+ */
+
+/* 0x70: Reserved */
+#define ACT8945A_APCH_CFG 0x71
+#define ACT8945A_APCH_STATUS 0x78
+#define ACT8945A_APCH_CTRL 0x79
+#define ACT8945A_APCH_STATE 0x7A
+
+/* ACT8945A_APCH_CFG */
+#define APCH_CFG_OVPSET (0x3 << 0)
+#define APCH_CFG_OVPSET_6V6 (0x0 << 0)
+#define APCH_CFG_OVPSET_7V (0x1 << 0)
+#define APCH_CFG_OVPSET_7V5 (0x2 << 0)
+#define APCH_CFG_OVPSET_8V (0x3 << 0)
+#define APCH_CFG_PRETIMO (0x3 << 2)
+#define APCH_CFG_PRETIMO_40_MIN (0x0 << 2)
+#define APCH_CFG_PRETIMO_60_MIN (0x1 << 2)
+#define APCH_CFG_PRETIMO_80_MIN (0x2 << 2)
+#define APCH_CFG_PRETIMO_DISABLED (0x3 << 2)
+#define APCH_CFG_TOTTIMO (0x3 << 4)
+#define APCH_CFG_TOTTIMO_3_HOUR (0x0 << 4)
+#define APCH_CFG_TOTTIMO_4_HOUR (0x1 << 4)
+#define APCH_CFG_TOTTIMO_5_HOUR (0x2 << 4)
+#define APCH_CFG_TOTTIMO_DISABLED (0x3 << 4)
+#define APCH_CFG_SUSCHG (0x1 << 7)
+
+#define APCH_STATUS_CHGDAT BIT(0)
+#define APCH_STATUS_INDAT BIT(1)
+#define APCH_STATUS_TEMPDAT BIT(2)
+#define APCH_STATUS_TIMRDAT BIT(3)
+#define APCH_STATUS_CHGSTAT BIT(4)
+#define APCH_STATUS_INSTAT BIT(5)
+#define APCH_STATUS_TEMPSTAT BIT(6)
+#define APCH_STATUS_TIMRSTAT BIT(7)
+
+#define APCH_CTRL_CHGEOCOUT BIT(0)
+#define APCH_CTRL_INDIS BIT(1)
+#define APCH_CTRL_TEMPOUT BIT(2)
+#define APCH_CTRL_TIMRPRE BIT(3)
+#define APCH_CTRL_CHGEOCIN BIT(4)
+#define APCH_CTRL_INCON BIT(5)
+#define APCH_CTRL_TEMPIN BIT(6)
+#define APCH_CTRL_TIMRTOT BIT(7)
+
+#define APCH_STATE_ACINSTAT (0x1 << 1)
+#define APCH_STATE_CSTATE (0x3 << 4)
+#define APCH_STATE_CSTATE_SHIFT 4
+#define APCH_STATE_CSTATE_DISABLED 0x00
+#define APCH_STATE_CSTATE_EOC 0x01
+#define APCH_STATE_CSTATE_FAST 0x02
+#define APCH_STATE_CSTATE_PRE 0x03
+
+struct act8945a_charger {
+ struct power_supply *psy;
+ struct power_supply_desc desc;
+ struct regmap *regmap;
+ struct work_struct work;
+
+ bool init_done;
+ struct gpio_desc *lbo_gpio;
+ struct gpio_desc *chglev_gpio;
+};
+
+static int act8945a_get_charger_state(struct regmap *regmap, int *val)
+{
+ int ret;
+ unsigned int status, state;
+
+ ret = regmap_read(regmap, ACT8945A_APCH_STATUS, &status);
+ if (ret < 0)
+ return ret;
+
+ ret = regmap_read(regmap, ACT8945A_APCH_STATE, &state);
+ if (ret < 0)
+ return ret;
+
+ state &= APCH_STATE_CSTATE;
+ state >>= APCH_STATE_CSTATE_SHIFT;
+
+ switch (state) {
+ case APCH_STATE_CSTATE_PRE:
+ case APCH_STATE_CSTATE_FAST:
+ *val = POWER_SUPPLY_STATUS_CHARGING;
+ break;
+ case APCH_STATE_CSTATE_EOC:
+ if (status & APCH_STATUS_CHGDAT)
+ *val = POWER_SUPPLY_STATUS_FULL;
+ else
+ *val = POWER_SUPPLY_STATUS_CHARGING;
+ break;
+ case APCH_STATE_CSTATE_DISABLED:
+ default:
+ if (!(status & APCH_STATUS_INDAT))
+ *val = POWER_SUPPLY_STATUS_DISCHARGING;
+ else
+ *val = POWER_SUPPLY_STATUS_NOT_CHARGING;
+ break;
+ }
+
+ return 0;
+}
+
+static int act8945a_get_charge_type(struct regmap *regmap, int *val)
+{
+ int ret;
+ unsigned int status, state;
+
+ ret = regmap_read(regmap, ACT8945A_APCH_STATUS, &status);
+ if (ret < 0)
+ return ret;
+
+ ret = regmap_read(regmap, ACT8945A_APCH_STATE, &state);
+ if (ret < 0)
+ return ret;
+
+ state &= APCH_STATE_CSTATE;
+ state >>= APCH_STATE_CSTATE_SHIFT;
+
+ switch (state) {
+ case APCH_STATE_CSTATE_PRE:
+ *val = POWER_SUPPLY_CHARGE_TYPE_TRICKLE;
+ break;
+ case APCH_STATE_CSTATE_FAST:
+ *val = POWER_SUPPLY_CHARGE_TYPE_FAST;
+ break;
+ case APCH_STATE_CSTATE_EOC:
+ *val = POWER_SUPPLY_CHARGE_TYPE_NONE;
+ break;
+ case APCH_STATE_CSTATE_DISABLED:
+ default:
+ if (!(status & APCH_STATUS_INDAT))
+ *val = POWER_SUPPLY_CHARGE_TYPE_NONE;
+ else
+ *val = POWER_SUPPLY_CHARGE_TYPE_UNKNOWN;
+ break;
+ }
+
+ return 0;
+}
+
+static int act8945a_get_battery_health(struct regmap *regmap, int *val)
+{
+ int ret;
+ unsigned int status, state, config;
+
+ ret = regmap_read(regmap, ACT8945A_APCH_STATUS, &status);
+ if (ret < 0)
+ return ret;
+
+ ret = regmap_read(regmap, ACT8945A_APCH_CFG, &config);
+ if (ret < 0)
+ return ret;
+
+ ret = regmap_read(regmap, ACT8945A_APCH_STATE, &state);
+ if (ret < 0)
+ return ret;
+
+ state &= APCH_STATE_CSTATE;
+ state >>= APCH_STATE_CSTATE_SHIFT;
+
+ switch (state) {
+ case APCH_STATE_CSTATE_DISABLED:
+ if (config & APCH_CFG_SUSCHG) {
+ *val = POWER_SUPPLY_HEALTH_UNKNOWN;
+ } else if (status & APCH_STATUS_INDAT) {
+ if (!(status & APCH_STATUS_TEMPDAT))
+ *val = POWER_SUPPLY_HEALTH_OVERHEAT;
+ else if (status & APCH_STATUS_TIMRDAT)
+ *val = POWER_SUPPLY_HEALTH_SAFETY_TIMER_EXPIRE;
+ else
+ *val = POWER_SUPPLY_HEALTH_OVERVOLTAGE;
+ } else {
+ *val = POWER_SUPPLY_HEALTH_GOOD;
+ }
+ break;
+ case APCH_STATE_CSTATE_PRE:
+ case APCH_STATE_CSTATE_FAST:
+ case APCH_STATE_CSTATE_EOC:
+ default:
+ *val = POWER_SUPPLY_HEALTH_GOOD;
+ break;
+ }
+
+ return 0;
+}
+
+static int act8945a_get_capacity_level(struct act8945a_charger *charger,
+ struct regmap *regmap, int *val)
+{
+ int ret;
+ unsigned int status, state, config;
+ int lbo_level = gpiod_get_value(charger->lbo_gpio);
+
+ ret = regmap_read(regmap, ACT8945A_APCH_STATUS, &status);
+ if (ret < 0)
+ return ret;
+
+ ret = regmap_read(regmap, ACT8945A_APCH_CFG, &config);
+ if (ret < 0)
+ return ret;
+
+ ret = regmap_read(regmap, ACT8945A_APCH_STATE, &state);
+ if (ret < 0)
+ return ret;
+
+ state &= APCH_STATE_CSTATE;
+ state >>= APCH_STATE_CSTATE_SHIFT;
+
+ switch (state) {
+ case APCH_STATE_CSTATE_PRE:
+ *val = POWER_SUPPLY_CAPACITY_LEVEL_LOW;
+ break;
+ case APCH_STATE_CSTATE_FAST:
+ if (lbo_level)
+ *val = POWER_SUPPLY_CAPACITY_LEVEL_HIGH;
+ else
+ *val = POWER_SUPPLY_CAPACITY_LEVEL_LOW;
+ break;
+ case APCH_STATE_CSTATE_EOC:
+ if (status & APCH_STATUS_CHGDAT)
+ *val = POWER_SUPPLY_CAPACITY_LEVEL_FULL;
+ else
+ *val = POWER_SUPPLY_CAPACITY_LEVEL_NORMAL;
+ break;
+ case APCH_STATE_CSTATE_DISABLED:
+ default:
+ if (config & APCH_CFG_SUSCHG) {
+ *val = POWER_SUPPLY_CAPACITY_LEVEL_UNKNOWN;
+ } else {
+ *val = POWER_SUPPLY_CAPACITY_LEVEL_NORMAL;
+ if (!(status & APCH_STATUS_INDAT)) {
+ if (!lbo_level)
+ *val = POWER_SUPPLY_CAPACITY_LEVEL_CRITICAL;
+ }
+ }
+ break;
+ }
+
+ return 0;
+}
+
+#define MAX_CURRENT_USB_HIGH 450000
+#define MAX_CURRENT_USB_LOW 90000
+#define MAX_CURRENT_USB_PRE 45000
+/*
+ * Riset(K) = 2336 * (1V/Ichg(mA)) - 0.205
+ * Riset = 2.43K
+ */
+#define MAX_CURRENT_AC_HIGH 886527
+#define MAX_CURRENT_AC_LOW 117305
+#define MAX_CURRENT_AC_HIGH_PRE 88653
+#define MAX_CURRENT_AC_LOW_PRE 11731
+
+static int act8945a_get_current_max(struct act8945a_charger *charger,
+ struct regmap *regmap, int *val)
+{
+ int ret;
+ unsigned int status, state;
+ unsigned int acin_state;
+ int chgin_level = gpiod_get_value(charger->chglev_gpio);
+
+ ret = regmap_read(regmap, ACT8945A_APCH_STATUS, &status);
+ if (ret < 0)
+ return ret;
+
+ ret = regmap_read(regmap, ACT8945A_APCH_STATE, &state);
+ if (ret < 0)
+ return ret;
+
+ acin_state = (state & APCH_STATE_ACINSTAT) >> 1;
+
+ state &= APCH_STATE_CSTATE;
+ state >>= APCH_STATE_CSTATE_SHIFT;
+
+ switch (state) {
+ case APCH_STATE_CSTATE_PRE:
+ if (acin_state) {
+ if (chgin_level)
+ *val = MAX_CURRENT_AC_HIGH_PRE;
+ else
+ *val = MAX_CURRENT_AC_LOW_PRE;
+ } else {
+ *val = MAX_CURRENT_USB_PRE;
+ }
+ break;
+ case APCH_STATE_CSTATE_FAST:
+ if (acin_state) {
+ if (chgin_level)
+ *val = MAX_CURRENT_AC_HIGH;
+ else
+ *val = MAX_CURRENT_AC_LOW;
+ } else {
+ if (chgin_level)
+ *val = MAX_CURRENT_USB_HIGH;
+ else
+ *val = MAX_CURRENT_USB_LOW;
+ }
+ break;
+ case APCH_STATE_CSTATE_EOC:
+ case APCH_STATE_CSTATE_DISABLED:
+ default:
+ *val = 0;
+ break;
+ }
+
+ return 0;
+}
+
+static enum power_supply_property act8945a_charger_props[] = {
+ POWER_SUPPLY_PROP_STATUS,
+ POWER_SUPPLY_PROP_CHARGE_TYPE,
+ POWER_SUPPLY_PROP_TECHNOLOGY,
+ POWER_SUPPLY_PROP_HEALTH,
+ POWER_SUPPLY_PROP_CAPACITY_LEVEL,
+ POWER_SUPPLY_PROP_CURRENT_MAX,
+ POWER_SUPPLY_PROP_MODEL_NAME,
+ POWER_SUPPLY_PROP_MANUFACTURER
+};
+
+static int act8945a_charger_get_property(struct power_supply *psy,
+ enum power_supply_property prop,
+ union power_supply_propval *val)
+{
+ struct act8945a_charger *charger = power_supply_get_drvdata(psy);
+ struct regmap *regmap = charger->regmap;
+ int ret = 0;
+
+ switch (prop) {
+ case POWER_SUPPLY_PROP_STATUS:
+ ret = act8945a_get_charger_state(regmap, &val->intval);
+ break;
+ case POWER_SUPPLY_PROP_CHARGE_TYPE:
+ ret = act8945a_get_charge_type(regmap, &val->intval);
+ break;
+ case POWER_SUPPLY_PROP_TECHNOLOGY:
+ val->intval = POWER_SUPPLY_TECHNOLOGY_LION;
+ break;
+ case POWER_SUPPLY_PROP_HEALTH:
+ ret = act8945a_get_battery_health(regmap, &val->intval);
+ break;
+ case POWER_SUPPLY_PROP_CAPACITY_LEVEL:
+ ret = act8945a_get_capacity_level(charger,
+ regmap, &val->intval);
+ break;
+ case POWER_SUPPLY_PROP_CURRENT_MAX:
+ ret = act8945a_get_current_max(charger,
+ regmap, &val->intval);
+ break;
+ case POWER_SUPPLY_PROP_MODEL_NAME:
+ val->strval = act8945a_charger_model;
+ break;
+ case POWER_SUPPLY_PROP_MANUFACTURER:
+ val->strval = act8945a_charger_manufacturer;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return ret;
+}
+
+static int act8945a_enable_interrupt(struct act8945a_charger *charger)
+{
+ struct regmap *regmap = charger->regmap;
+ unsigned char ctrl;
+ int ret;
+
+ ctrl = APCH_CTRL_CHGEOCOUT | APCH_CTRL_CHGEOCIN |
+ APCH_CTRL_INDIS | APCH_CTRL_INCON |
+ APCH_CTRL_TEMPOUT | APCH_CTRL_TEMPIN |
+ APCH_CTRL_TIMRPRE | APCH_CTRL_TIMRTOT;
+ ret = regmap_write(regmap, ACT8945A_APCH_CTRL, ctrl);
+ if (ret)
+ return ret;
+
+ ctrl = APCH_STATUS_CHGSTAT | APCH_STATUS_INSTAT |
+ APCH_STATUS_TEMPSTAT | APCH_STATUS_TIMRSTAT;
+ ret = regmap_write(regmap, ACT8945A_APCH_STATUS, ctrl);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+
+static unsigned int act8945a_set_supply_type(struct act8945a_charger *charger,
+ unsigned int *type)
+{
+ unsigned int status, state;
+ int ret;
+
+ ret = regmap_read(charger->regmap, ACT8945A_APCH_STATUS, &status);
+ if (ret < 0)
+ return ret;
+
+ ret = regmap_read(charger->regmap, ACT8945A_APCH_STATE, &state);
+ if (ret < 0)
+ return ret;
+
+ if (status & APCH_STATUS_INDAT) {
+ if (state & APCH_STATE_ACINSTAT)
+ *type = POWER_SUPPLY_TYPE_MAINS;
+ else
+ *type = POWER_SUPPLY_TYPE_USB;
+ } else {
+ *type = POWER_SUPPLY_TYPE_BATTERY;
+ }
+
+ return 0;
+}
+
+static void act8945a_work(struct work_struct *work)
+{
+ struct act8945a_charger *charger =
+ container_of(work, struct act8945a_charger, work);
+
+ act8945a_set_supply_type(charger, &charger->desc.type);
+
+ power_supply_changed(charger->psy);
+}
+
+static irqreturn_t act8945a_status_changed(int irq, void *dev_id)
+{
+ struct act8945a_charger *charger = dev_id;
+
+ if (charger->init_done)
+ schedule_work(&charger->work);
+
+ return IRQ_HANDLED;
+}
+
+#define DEFAULT_TOTAL_TIME_OUT 3
+#define DEFAULT_PRE_TIME_OUT 40
+#define DEFAULT_INPUT_OVP_THRESHOLD 6600
+
+static int act8945a_charger_config(struct device *dev,
+ struct act8945a_charger *charger)
+{
+ struct device_node *np = dev->of_node;
+ struct regmap *regmap = charger->regmap;
+
+ u32 total_time_out;
+ u32 pre_time_out;
+ u32 input_voltage_threshold;
+ int err, ret;
+
+ unsigned int tmp;
+ unsigned int value = 0;
+
+ if (!np) {
+ dev_err(dev, "no charger of node\n");
+ return -EINVAL;
+ }
+
+ ret = regmap_read(regmap, ACT8945A_APCH_CFG, &tmp);
+ if (ret)
+ return ret;
+
+ if (tmp & APCH_CFG_SUSCHG) {
+ value |= APCH_CFG_SUSCHG;
+ dev_info(dev, "have been suspended\n");
+ }
+
+ charger->lbo_gpio = devm_gpiod_get_optional(dev, "active-semi,lbo",
+ GPIOD_IN);
+ if (IS_ERR(charger->lbo_gpio)) {
+ err = PTR_ERR(charger->lbo_gpio);
+ dev_err(dev, "unable to claim gpio \"lbo\": %d\n", err);
+ return err;
+ }
+
+ ret = devm_request_irq(dev, gpiod_to_irq(charger->lbo_gpio),
+ act8945a_status_changed,
+ (IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING),
+ "act8945a_lbo_detect", charger);
+ if (ret)
+ dev_info(dev, "failed to request gpio \"lbo\" IRQ\n");
+
+ charger->chglev_gpio = devm_gpiod_get_optional(dev,
+ "active-semi,chglev",
+ GPIOD_IN);
+ if (IS_ERR(charger->chglev_gpio)) {
+ err = PTR_ERR(charger->chglev_gpio);
+ dev_err(dev, "unable to claim gpio \"chglev\": %d\n", err);
+ return err;
+ }
+
+ if (of_property_read_u32(np,
+ "active-semi,input-voltage-threshold-microvolt",
+ &input_voltage_threshold))
+ input_voltage_threshold = DEFAULT_INPUT_OVP_THRESHOLD;
+
+ if (of_property_read_u32(np,
+ "active-semi,precondition-timeout",
+ &pre_time_out))
+ pre_time_out = DEFAULT_PRE_TIME_OUT;
+
+ if (of_property_read_u32(np, "active-semi,total-timeout",
+ &total_time_out))
+ total_time_out = DEFAULT_TOTAL_TIME_OUT;
+
+ switch (input_voltage_threshold) {
+ case 8000:
+ value |= APCH_CFG_OVPSET_8V;
+ break;
+ case 7500:
+ value |= APCH_CFG_OVPSET_7V5;
+ break;
+ case 7000:
+ value |= APCH_CFG_OVPSET_7V;
+ break;
+ case 6600:
+ default:
+ value |= APCH_CFG_OVPSET_6V6;
+ break;
+ }
+
+ switch (pre_time_out) {
+ case 60:
+ value |= APCH_CFG_PRETIMO_60_MIN;
+ break;
+ case 80:
+ value |= APCH_CFG_PRETIMO_80_MIN;
+ break;
+ case 0:
+ value |= APCH_CFG_PRETIMO_DISABLED;
+ break;
+ case 40:
+ default:
+ value |= APCH_CFG_PRETIMO_40_MIN;
+ break;
+ }
+
+ switch (total_time_out) {
+ case 4:
+ value |= APCH_CFG_TOTTIMO_4_HOUR;
+ break;
+ case 5:
+ value |= APCH_CFG_TOTTIMO_5_HOUR;
+ break;
+ case 0:
+ value |= APCH_CFG_TOTTIMO_DISABLED;
+ break;
+ case 3:
+ default:
+ value |= APCH_CFG_TOTTIMO_3_HOUR;
+ break;
+ }
+
+ return regmap_write(regmap, ACT8945A_APCH_CFG, value);
+}
+
+static int act8945a_charger_probe(struct platform_device *pdev)
+{
+ struct act8945a_charger *charger;
+ struct power_supply_config psy_cfg = {};
+ int irq, ret;
+
+ charger = devm_kzalloc(&pdev->dev, sizeof(*charger), GFP_KERNEL);
+ if (!charger)
+ return -ENOMEM;
+
+ charger->regmap = dev_get_regmap(pdev->dev.parent, NULL);
+ if (!charger->regmap) {
+ dev_err(&pdev->dev, "Parent did not provide regmap\n");
+ return -EINVAL;
+ }
+
+ ret = act8945a_charger_config(&pdev->dev, charger);
+ if (ret)
+ return ret;
+
+ irq = of_irq_get(pdev->dev.of_node, 0);
+ if (irq <= 0) {
+ dev_err(&pdev->dev, "failed to find IRQ number\n");
+ return irq ?: -ENXIO;
+ }
+
+ ret = devm_request_irq(&pdev->dev, irq, act8945a_status_changed,
+ IRQF_TRIGGER_FALLING, "act8945a_interrupt",
+ charger);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to request nIRQ pin IRQ\n");
+ return ret;
+ }
+
+ charger->desc.name = "act8945a-charger";
+ charger->desc.get_property = act8945a_charger_get_property;
+ charger->desc.properties = act8945a_charger_props;
+ charger->desc.num_properties = ARRAY_SIZE(act8945a_charger_props);
+
+ ret = act8945a_set_supply_type(charger, &charger->desc.type);
+ if (ret)
+ return -EINVAL;
+
+ psy_cfg.of_node = pdev->dev.of_node;
+ psy_cfg.drv_data = charger;
+
+ charger->psy = devm_power_supply_register(&pdev->dev,
+ &charger->desc,
+ &psy_cfg);
+ if (IS_ERR(charger->psy)) {
+ dev_err(&pdev->dev, "failed to register power supply\n");
+ return PTR_ERR(charger->psy);
+ }
+
+ platform_set_drvdata(pdev, charger);
+
+ INIT_WORK(&charger->work, act8945a_work);
+
+ ret = act8945a_enable_interrupt(charger);
+ if (ret)
+ return -EIO;
+
+ charger->init_done = true;
+
+ return 0;
+}
+
+static int act8945a_charger_remove(struct platform_device *pdev)
+{
+ struct act8945a_charger *charger = platform_get_drvdata(pdev);
+
+ charger->init_done = false;
+ cancel_work_sync(&charger->work);
+
+ return 0;
+}
+
+static struct platform_driver act8945a_charger_driver = {
+ .driver = {
+ .name = "act8945a-charger",
+ },
+ .probe = act8945a_charger_probe,
+ .remove = act8945a_charger_remove,
+};
+module_platform_driver(act8945a_charger_driver);
+
+MODULE_DESCRIPTION("Active-semi ACT8945A ActivePath charger driver");
+MODULE_AUTHOR("Wenyou Yang <wenyou.yang@atmel.com>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/power/supply/adp5061.c b/drivers/power/supply/adp5061.c
new file mode 100644
index 000000000..daee1161c
--- /dev/null
+++ b/drivers/power/supply/adp5061.c
@@ -0,0 +1,744 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * ADP5061 I2C Programmable Linear Battery Charger
+ *
+ * Copyright 2018 Analog Devices Inc.
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include <linux/delay.h>
+#include <linux/pm.h>
+#include <linux/mod_devicetable.h>
+#include <linux/power_supply.h>
+#include <linux/platform_device.h>
+#include <linux/of.h>
+#include <linux/regmap.h>
+
+/* ADP5061 registers definition */
+#define ADP5061_ID 0x00
+#define ADP5061_REV 0x01
+#define ADP5061_VINX_SET 0x02
+#define ADP5061_TERM_SET 0x03
+#define ADP5061_CHG_CURR 0x04
+#define ADP5061_VOLTAGE_TH 0x05
+#define ADP5061_TIMER_SET 0x06
+#define ADP5061_FUNC_SET_1 0x07
+#define ADP5061_FUNC_SET_2 0x08
+#define ADP5061_INT_EN 0x09
+#define ADP5061_INT_ACT 0x0A
+#define ADP5061_CHG_STATUS_1 0x0B
+#define ADP5061_CHG_STATUS_2 0x0C
+#define ADP5061_FAULT 0x0D
+#define ADP5061_BATTERY_SHORT 0x10
+#define ADP5061_IEND 0x11
+
+/* ADP5061_VINX_SET */
+#define ADP5061_VINX_SET_ILIM_MSK GENMASK(3, 0)
+#define ADP5061_VINX_SET_ILIM_MODE(x) (((x) & 0x0F) << 0)
+
+/* ADP5061_TERM_SET */
+#define ADP5061_TERM_SET_VTRM_MSK GENMASK(7, 2)
+#define ADP5061_TERM_SET_VTRM_MODE(x) (((x) & 0x3F) << 2)
+#define ADP5061_TERM_SET_CHG_VLIM_MSK GENMASK(1, 0)
+#define ADP5061_TERM_SET_CHG_VLIM_MODE(x) (((x) & 0x03) << 0)
+
+/* ADP5061_CHG_CURR */
+#define ADP5061_CHG_CURR_ICHG_MSK GENMASK(6, 2)
+#define ADP5061_CHG_CURR_ICHG_MODE(x) (((x) & 0x1F) << 2)
+#define ADP5061_CHG_CURR_ITRK_DEAD_MSK GENMASK(1, 0)
+#define ADP5061_CHG_CURR_ITRK_DEAD_MODE(x) (((x) & 0x03) << 0)
+
+/* ADP5061_VOLTAGE_TH */
+#define ADP5061_VOLTAGE_TH_DIS_RCH_MSK BIT(7)
+#define ADP5061_VOLTAGE_TH_DIS_RCH_MODE(x) (((x) & 0x01) << 7)
+#define ADP5061_VOLTAGE_TH_VRCH_MSK GENMASK(6, 5)
+#define ADP5061_VOLTAGE_TH_VRCH_MODE(x) (((x) & 0x03) << 5)
+#define ADP5061_VOLTAGE_TH_VTRK_DEAD_MSK GENMASK(4, 3)
+#define ADP5061_VOLTAGE_TH_VTRK_DEAD_MODE(x) (((x) & 0x03) << 3)
+#define ADP5061_VOLTAGE_TH_VWEAK_MSK GENMASK(2, 0)
+#define ADP5061_VOLTAGE_TH_VWEAK_MODE(x) (((x) & 0x07) << 0)
+
+/* ADP5061_CHG_STATUS_1 */
+#define ADP5061_CHG_STATUS_1_VIN_OV(x) (((x) >> 7) & 0x1)
+#define ADP5061_CHG_STATUS_1_VIN_OK(x) (((x) >> 6) & 0x1)
+#define ADP5061_CHG_STATUS_1_VIN_ILIM(x) (((x) >> 5) & 0x1)
+#define ADP5061_CHG_STATUS_1_THERM_LIM(x) (((x) >> 4) & 0x1)
+#define ADP5061_CHG_STATUS_1_CHDONE(x) (((x) >> 3) & 0x1)
+#define ADP5061_CHG_STATUS_1_CHG_STATUS(x) (((x) >> 0) & 0x7)
+
+/* ADP5061_CHG_STATUS_2 */
+#define ADP5061_CHG_STATUS_2_THR_STATUS(x) (((x) >> 5) & 0x7)
+#define ADP5061_CHG_STATUS_2_RCH_LIM_INFO(x) (((x) >> 3) & 0x1)
+#define ADP5061_CHG_STATUS_2_BAT_STATUS(x) (((x) >> 0) & 0x7)
+
+/* ADP5061_IEND */
+#define ADP5061_IEND_IEND_MSK GENMASK(7, 5)
+#define ADP5061_IEND_IEND_MODE(x) (((x) & 0x07) << 5)
+
+#define ADP5061_NO_BATTERY 0x01
+#define ADP5061_ICHG_MAX 1300 // mA
+
+enum adp5061_chg_status {
+ ADP5061_CHG_OFF,
+ ADP5061_CHG_TRICKLE,
+ ADP5061_CHG_FAST_CC,
+ ADP5061_CHG_FAST_CV,
+ ADP5061_CHG_COMPLETE,
+ ADP5061_CHG_LDO_MODE,
+ ADP5061_CHG_TIMER_EXP,
+ ADP5061_CHG_BAT_DET,
+};
+
+static const int adp5061_chg_type[4] = {
+ [ADP5061_CHG_OFF] = POWER_SUPPLY_CHARGE_TYPE_NONE,
+ [ADP5061_CHG_TRICKLE] = POWER_SUPPLY_CHARGE_TYPE_TRICKLE,
+ [ADP5061_CHG_FAST_CC] = POWER_SUPPLY_CHARGE_TYPE_FAST,
+ [ADP5061_CHG_FAST_CV] = POWER_SUPPLY_CHARGE_TYPE_FAST,
+};
+
+static const int adp5061_vweak_th[8] = {
+ 2700, 2800, 2900, 3000, 3100, 3200, 3300, 3400,
+};
+
+static const int adp5061_prechg_current[4] = {
+ 5, 10, 20, 80,
+};
+
+static const int adp5061_vmin[4] = {
+ 2000, 2500, 2600, 2900,
+};
+
+static const int adp5061_const_chg_vmax[4] = {
+ 3200, 3400, 3700, 3800,
+};
+
+static const int adp5061_const_ichg[24] = {
+ 50, 100, 150, 200, 250, 300, 350, 400, 450, 500, 550, 600, 650,
+ 700, 750, 800, 850, 900, 950, 1000, 1050, 1100, 1200, 1300,
+};
+
+static const int adp5061_vmax[36] = {
+ 3800, 3820, 3840, 3860, 3880, 3900, 3920, 3940, 3960, 3980,
+ 4000, 4020, 4040, 4060, 4080, 4100, 4120, 4140, 4160, 4180,
+ 4200, 4220, 4240, 4260, 4280, 4300, 4320, 4340, 4360, 4380,
+ 4400, 4420, 4440, 4460, 4480, 4500,
+};
+
+static const int adp5061_in_current_lim[16] = {
+ 100, 150, 200, 250, 300, 400, 500, 600, 700,
+ 800, 900, 1000, 1200, 1500, 1800, 2100,
+};
+
+static const int adp5061_iend[8] = {
+ 12500, 32500, 52500, 72500, 92500, 117500, 142500, 170000,
+};
+
+struct adp5061_state {
+ struct i2c_client *client;
+ struct regmap *regmap;
+ struct power_supply *psy;
+};
+
+static int adp5061_get_array_index(const int *array, u8 size, int val)
+{
+ int i;
+
+ for (i = 1; i < size; i++) {
+ if (val < array[i])
+ break;
+ }
+
+ return i-1;
+}
+
+static int adp5061_get_status(struct adp5061_state *st,
+ u8 *status1, u8 *status2)
+{
+ u8 buf[2];
+ int ret;
+
+ /* CHG_STATUS1 and CHG_STATUS2 are adjacent regs */
+ ret = regmap_bulk_read(st->regmap, ADP5061_CHG_STATUS_1,
+ &buf[0], 2);
+ if (ret < 0)
+ return ret;
+
+ *status1 = buf[0];
+ *status2 = buf[1];
+
+ return ret;
+}
+
+static int adp5061_get_input_current_limit(struct adp5061_state *st,
+ union power_supply_propval *val)
+{
+ unsigned int regval;
+ int mode, ret;
+
+ ret = regmap_read(st->regmap, ADP5061_VINX_SET, &regval);
+ if (ret < 0)
+ return ret;
+
+ mode = ADP5061_VINX_SET_ILIM_MODE(regval);
+ val->intval = adp5061_in_current_lim[mode] * 1000;
+
+ return ret;
+}
+
+static int adp5061_set_input_current_limit(struct adp5061_state *st, int val)
+{
+ int index;
+
+ /* Convert from uA to mA */
+ val /= 1000;
+ index = adp5061_get_array_index(adp5061_in_current_lim,
+ ARRAY_SIZE(adp5061_in_current_lim),
+ val);
+ if (index < 0)
+ return index;
+
+ return regmap_update_bits(st->regmap, ADP5061_VINX_SET,
+ ADP5061_VINX_SET_ILIM_MSK,
+ ADP5061_VINX_SET_ILIM_MODE(index));
+}
+
+static int adp5061_set_min_voltage(struct adp5061_state *st, int val)
+{
+ int index;
+
+ /* Convert from uV to mV */
+ val /= 1000;
+ index = adp5061_get_array_index(adp5061_vmin,
+ ARRAY_SIZE(adp5061_vmin),
+ val);
+ if (index < 0)
+ return index;
+
+ return regmap_update_bits(st->regmap, ADP5061_VOLTAGE_TH,
+ ADP5061_VOLTAGE_TH_VTRK_DEAD_MSK,
+ ADP5061_VOLTAGE_TH_VTRK_DEAD_MODE(index));
+}
+
+static int adp5061_get_min_voltage(struct adp5061_state *st,
+ union power_supply_propval *val)
+{
+ unsigned int regval;
+ int ret;
+
+ ret = regmap_read(st->regmap, ADP5061_VOLTAGE_TH, &regval);
+ if (ret < 0)
+ return ret;
+
+ regval = ((regval & ADP5061_VOLTAGE_TH_VTRK_DEAD_MSK) >> 3);
+ val->intval = adp5061_vmin[regval] * 1000;
+
+ return ret;
+}
+
+static int adp5061_get_chg_volt_lim(struct adp5061_state *st,
+ union power_supply_propval *val)
+{
+ unsigned int regval;
+ int mode, ret;
+
+ ret = regmap_read(st->regmap, ADP5061_TERM_SET, &regval);
+ if (ret < 0)
+ return ret;
+
+ mode = ADP5061_TERM_SET_CHG_VLIM_MODE(regval);
+ val->intval = adp5061_const_chg_vmax[mode] * 1000;
+
+ return ret;
+}
+
+static int adp5061_get_max_voltage(struct adp5061_state *st,
+ union power_supply_propval *val)
+{
+ unsigned int regval;
+ int ret;
+
+ ret = regmap_read(st->regmap, ADP5061_TERM_SET, &regval);
+ if (ret < 0)
+ return ret;
+
+ regval = ((regval & ADP5061_TERM_SET_VTRM_MSK) >> 2) - 0x0F;
+ if (regval >= ARRAY_SIZE(adp5061_vmax))
+ regval = ARRAY_SIZE(adp5061_vmax) - 1;
+
+ val->intval = adp5061_vmax[regval] * 1000;
+
+ return ret;
+}
+
+static int adp5061_set_max_voltage(struct adp5061_state *st, int val)
+{
+ int vmax_index;
+
+ /* Convert from uV to mV */
+ val /= 1000;
+ if (val > 4500)
+ val = 4500;
+
+ vmax_index = adp5061_get_array_index(adp5061_vmax,
+ ARRAY_SIZE(adp5061_vmax), val);
+ if (vmax_index < 0)
+ return vmax_index;
+
+ vmax_index += 0x0F;
+
+ return regmap_update_bits(st->regmap, ADP5061_TERM_SET,
+ ADP5061_TERM_SET_VTRM_MSK,
+ ADP5061_TERM_SET_VTRM_MODE(vmax_index));
+}
+
+static int adp5061_set_const_chg_vmax(struct adp5061_state *st, int val)
+{
+ int index;
+
+ /* Convert from uV to mV */
+ val /= 1000;
+ index = adp5061_get_array_index(adp5061_const_chg_vmax,
+ ARRAY_SIZE(adp5061_const_chg_vmax),
+ val);
+ if (index < 0)
+ return index;
+
+ return regmap_update_bits(st->regmap, ADP5061_TERM_SET,
+ ADP5061_TERM_SET_CHG_VLIM_MSK,
+ ADP5061_TERM_SET_CHG_VLIM_MODE(index));
+}
+
+static int adp5061_set_const_chg_current(struct adp5061_state *st, int val)
+{
+
+ int index;
+
+ /* Convert from uA to mA */
+ val /= 1000;
+ if (val > ADP5061_ICHG_MAX)
+ val = ADP5061_ICHG_MAX;
+
+ index = adp5061_get_array_index(adp5061_const_ichg,
+ ARRAY_SIZE(adp5061_const_ichg),
+ val);
+ if (index < 0)
+ return index;
+
+ return regmap_update_bits(st->regmap, ADP5061_CHG_CURR,
+ ADP5061_CHG_CURR_ICHG_MSK,
+ ADP5061_CHG_CURR_ICHG_MODE(index));
+}
+
+static int adp5061_get_const_chg_current(struct adp5061_state *st,
+ union power_supply_propval *val)
+{
+ unsigned int regval;
+ int ret;
+
+ ret = regmap_read(st->regmap, ADP5061_CHG_CURR, &regval);
+ if (ret < 0)
+ return ret;
+
+ regval = ((regval & ADP5061_CHG_CURR_ICHG_MSK) >> 2);
+ if (regval >= ARRAY_SIZE(adp5061_const_ichg))
+ regval = ARRAY_SIZE(adp5061_const_ichg) - 1;
+
+ val->intval = adp5061_const_ichg[regval] * 1000;
+
+ return ret;
+}
+
+static int adp5061_get_prechg_current(struct adp5061_state *st,
+ union power_supply_propval *val)
+{
+ unsigned int regval;
+ int ret;
+
+ ret = regmap_read(st->regmap, ADP5061_CHG_CURR, &regval);
+ if (ret < 0)
+ return ret;
+
+ regval &= ADP5061_CHG_CURR_ITRK_DEAD_MSK;
+ val->intval = adp5061_prechg_current[regval] * 1000;
+
+ return ret;
+}
+
+static int adp5061_set_prechg_current(struct adp5061_state *st, int val)
+{
+ int index;
+
+ /* Convert from uA to mA */
+ val /= 1000;
+ index = adp5061_get_array_index(adp5061_prechg_current,
+ ARRAY_SIZE(adp5061_prechg_current),
+ val);
+ if (index < 0)
+ return index;
+
+ return regmap_update_bits(st->regmap, ADP5061_CHG_CURR,
+ ADP5061_CHG_CURR_ITRK_DEAD_MSK,
+ ADP5061_CHG_CURR_ITRK_DEAD_MODE(index));
+}
+
+static int adp5061_get_vweak_th(struct adp5061_state *st,
+ union power_supply_propval *val)
+{
+ unsigned int regval;
+ int ret;
+
+ ret = regmap_read(st->regmap, ADP5061_VOLTAGE_TH, &regval);
+ if (ret < 0)
+ return ret;
+
+ regval &= ADP5061_VOLTAGE_TH_VWEAK_MSK;
+ val->intval = adp5061_vweak_th[regval] * 1000;
+
+ return ret;
+}
+
+static int adp5061_set_vweak_th(struct adp5061_state *st, int val)
+{
+ int index;
+
+ /* Convert from uV to mV */
+ val /= 1000;
+ index = adp5061_get_array_index(adp5061_vweak_th,
+ ARRAY_SIZE(adp5061_vweak_th),
+ val);
+ if (index < 0)
+ return index;
+
+ return regmap_update_bits(st->regmap, ADP5061_VOLTAGE_TH,
+ ADP5061_VOLTAGE_TH_VWEAK_MSK,
+ ADP5061_VOLTAGE_TH_VWEAK_MODE(index));
+}
+
+static int adp5061_get_chg_type(struct adp5061_state *st,
+ union power_supply_propval *val)
+{
+ u8 status1, status2;
+ int chg_type, ret;
+
+ ret = adp5061_get_status(st, &status1, &status2);
+ if (ret < 0)
+ return ret;
+
+ chg_type = ADP5061_CHG_STATUS_1_CHG_STATUS(status1);
+ if (chg_type >= ARRAY_SIZE(adp5061_chg_type))
+ val->intval = POWER_SUPPLY_STATUS_UNKNOWN;
+ else
+ val->intval = adp5061_chg_type[chg_type];
+
+ return ret;
+}
+
+static int adp5061_get_charger_status(struct adp5061_state *st,
+ union power_supply_propval *val)
+{
+ u8 status1, status2;
+ int ret;
+
+ ret = adp5061_get_status(st, &status1, &status2);
+ if (ret < 0)
+ return ret;
+
+ switch (ADP5061_CHG_STATUS_1_CHG_STATUS(status1)) {
+ case ADP5061_CHG_OFF:
+ val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING;
+ break;
+ case ADP5061_CHG_TRICKLE:
+ case ADP5061_CHG_FAST_CC:
+ case ADP5061_CHG_FAST_CV:
+ val->intval = POWER_SUPPLY_STATUS_CHARGING;
+ break;
+ case ADP5061_CHG_COMPLETE:
+ val->intval = POWER_SUPPLY_STATUS_FULL;
+ break;
+ case ADP5061_CHG_TIMER_EXP:
+ /* The battery must be discharging if there is a charge fault */
+ val->intval = POWER_SUPPLY_STATUS_DISCHARGING;
+ break;
+ default:
+ val->intval = POWER_SUPPLY_STATUS_UNKNOWN;
+ }
+
+ return ret;
+}
+
+static int adp5061_get_battery_status(struct adp5061_state *st,
+ union power_supply_propval *val)
+{
+ u8 status1, status2;
+ int ret;
+
+ ret = adp5061_get_status(st, &status1, &status2);
+ if (ret < 0)
+ return ret;
+
+ switch (ADP5061_CHG_STATUS_2_BAT_STATUS(status2)) {
+ case 0x0: /* Battery monitor off */
+ case 0x1: /* No battery */
+ val->intval = POWER_SUPPLY_CAPACITY_LEVEL_UNKNOWN;
+ break;
+ case 0x2: /* VBAT < VTRK */
+ val->intval = POWER_SUPPLY_CAPACITY_LEVEL_CRITICAL;
+ break;
+ case 0x3: /* VTRK < VBAT_SNS < VWEAK */
+ val->intval = POWER_SUPPLY_CAPACITY_LEVEL_LOW;
+ break;
+ case 0x4: /* VBAT_SNS > VWEAK */
+ val->intval = POWER_SUPPLY_CAPACITY_LEVEL_NORMAL;
+ break;
+ }
+
+ return ret;
+}
+
+static int adp5061_get_termination_current(struct adp5061_state *st,
+ union power_supply_propval *val)
+{
+ unsigned int regval;
+ int ret;
+
+ ret = regmap_read(st->regmap, ADP5061_IEND, &regval);
+ if (ret < 0)
+ return ret;
+
+ regval = (regval & ADP5061_IEND_IEND_MSK) >> 5;
+ val->intval = adp5061_iend[regval];
+
+ return ret;
+}
+
+static int adp5061_set_termination_current(struct adp5061_state *st, int val)
+{
+ int index;
+
+ index = adp5061_get_array_index(adp5061_iend,
+ ARRAY_SIZE(adp5061_iend),
+ val);
+ if (index < 0)
+ return index;
+
+ return regmap_update_bits(st->regmap, ADP5061_IEND,
+ ADP5061_IEND_IEND_MSK,
+ ADP5061_IEND_IEND_MODE(index));
+}
+
+static int adp5061_get_property(struct power_supply *psy,
+ enum power_supply_property psp,
+ union power_supply_propval *val)
+{
+ struct adp5061_state *st = power_supply_get_drvdata(psy);
+ u8 status1, status2;
+ int mode, ret;
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_PRESENT:
+ ret = adp5061_get_status(st, &status1, &status2);
+ if (ret < 0)
+ return ret;
+
+ mode = ADP5061_CHG_STATUS_2_BAT_STATUS(status2);
+ if (mode == ADP5061_NO_BATTERY)
+ val->intval = 0;
+ else
+ val->intval = 1;
+ break;
+ case POWER_SUPPLY_PROP_CHARGE_TYPE:
+ return adp5061_get_chg_type(st, val);
+ case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT:
+ /* This property is used to indicate the input current
+ * limit into VINx (ILIM)
+ */
+ return adp5061_get_input_current_limit(st, val);
+ case POWER_SUPPLY_PROP_VOLTAGE_MAX:
+ /* This property is used to indicate the termination
+ * voltage (VTRM)
+ */
+ return adp5061_get_max_voltage(st, val);
+ case POWER_SUPPLY_PROP_VOLTAGE_MIN:
+ /*
+ * This property is used to indicate the trickle to fast
+ * charge threshold (VTRK_DEAD)
+ */
+ return adp5061_get_min_voltage(st, val);
+ case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX:
+ /* This property is used to indicate the charging
+ * voltage limit (CHG_VLIM)
+ */
+ return adp5061_get_chg_volt_lim(st, val);
+ case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT:
+ /*
+ * This property is used to indicate the value of the constant
+ * current charge (ICHG)
+ */
+ return adp5061_get_const_chg_current(st, val);
+ case POWER_SUPPLY_PROP_PRECHARGE_CURRENT:
+ /*
+ * This property is used to indicate the value of the trickle
+ * and weak charge currents (ITRK_DEAD)
+ */
+ return adp5061_get_prechg_current(st, val);
+ case POWER_SUPPLY_PROP_VOLTAGE_AVG:
+ /*
+ * This property is used to set the VWEAK threshold
+ * bellow this value, weak charge mode is entered
+ * above this value, fast chargerge mode is entered
+ */
+ return adp5061_get_vweak_th(st, val);
+ case POWER_SUPPLY_PROP_STATUS:
+ /*
+ * Indicate the charger status in relation to power
+ * supply status property
+ */
+ return adp5061_get_charger_status(st, val);
+ case POWER_SUPPLY_PROP_CAPACITY_LEVEL:
+ /*
+ * Indicate the battery status in relation to power
+ * supply capacity level property
+ */
+ return adp5061_get_battery_status(st, val);
+ case POWER_SUPPLY_PROP_CHARGE_TERM_CURRENT:
+ /* Indicate the values of the termination current */
+ return adp5061_get_termination_current(st, val);
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int adp5061_set_property(struct power_supply *psy,
+ enum power_supply_property psp,
+ const union power_supply_propval *val)
+{
+ struct adp5061_state *st = power_supply_get_drvdata(psy);
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT:
+ return adp5061_set_input_current_limit(st, val->intval);
+ case POWER_SUPPLY_PROP_VOLTAGE_MAX:
+ return adp5061_set_max_voltage(st, val->intval);
+ case POWER_SUPPLY_PROP_VOLTAGE_MIN:
+ return adp5061_set_min_voltage(st, val->intval);
+ case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX:
+ return adp5061_set_const_chg_vmax(st, val->intval);
+ case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT:
+ return adp5061_set_const_chg_current(st, val->intval);
+ case POWER_SUPPLY_PROP_PRECHARGE_CURRENT:
+ return adp5061_set_prechg_current(st, val->intval);
+ case POWER_SUPPLY_PROP_VOLTAGE_AVG:
+ return adp5061_set_vweak_th(st, val->intval);
+ case POWER_SUPPLY_PROP_CHARGE_TERM_CURRENT:
+ return adp5061_set_termination_current(st, val->intval);
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int adp5061_prop_writeable(struct power_supply *psy,
+ enum power_supply_property psp)
+{
+ switch (psp) {
+ case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT:
+ case POWER_SUPPLY_PROP_VOLTAGE_MAX:
+ case POWER_SUPPLY_PROP_VOLTAGE_MIN:
+ case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX:
+ case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT:
+ case POWER_SUPPLY_PROP_PRECHARGE_CURRENT:
+ case POWER_SUPPLY_PROP_VOLTAGE_AVG:
+ case POWER_SUPPLY_PROP_CHARGE_TERM_CURRENT:
+ return 1;
+ default:
+ return 0;
+ }
+}
+
+static enum power_supply_property adp5061_props[] = {
+ POWER_SUPPLY_PROP_PRESENT,
+ POWER_SUPPLY_PROP_CHARGE_TYPE,
+ POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT,
+ POWER_SUPPLY_PROP_VOLTAGE_MAX,
+ POWER_SUPPLY_PROP_VOLTAGE_MIN,
+ POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX,
+ POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT,
+ POWER_SUPPLY_PROP_PRECHARGE_CURRENT,
+ POWER_SUPPLY_PROP_VOLTAGE_AVG,
+ POWER_SUPPLY_PROP_STATUS,
+ POWER_SUPPLY_PROP_CAPACITY_LEVEL,
+ POWER_SUPPLY_PROP_CHARGE_TERM_CURRENT,
+};
+
+static const struct regmap_config adp5061_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+};
+
+static const struct power_supply_desc adp5061_desc = {
+ .name = "adp5061",
+ .type = POWER_SUPPLY_TYPE_USB,
+ .get_property = adp5061_get_property,
+ .set_property = adp5061_set_property,
+ .property_is_writeable = adp5061_prop_writeable,
+ .properties = adp5061_props,
+ .num_properties = ARRAY_SIZE(adp5061_props),
+};
+
+static int adp5061_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct power_supply_config psy_cfg = {};
+ struct adp5061_state *st;
+
+ st = devm_kzalloc(&client->dev, sizeof(*st), GFP_KERNEL);
+ if (!st)
+ return -ENOMEM;
+
+ st->client = client;
+ st->regmap = devm_regmap_init_i2c(client,
+ &adp5061_regmap_config);
+ if (IS_ERR(st->regmap)) {
+ dev_err(&client->dev, "Failed to initialize register map\n");
+ return -EINVAL;
+ }
+
+ i2c_set_clientdata(client, st);
+ psy_cfg.drv_data = st;
+
+ st->psy = devm_power_supply_register(&client->dev,
+ &adp5061_desc,
+ &psy_cfg);
+
+ if (IS_ERR(st->psy)) {
+ dev_err(&client->dev, "Failed to register power supply\n");
+ return PTR_ERR(st->psy);
+ }
+
+ return 0;
+}
+
+static const struct i2c_device_id adp5061_id[] = {
+ { "adp5061", 0},
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, adp5061_id);
+
+static struct i2c_driver adp5061_driver = {
+ .driver = {
+ .name = KBUILD_MODNAME,
+ },
+ .probe = adp5061_probe,
+ .id_table = adp5061_id,
+};
+module_i2c_driver(adp5061_driver);
+
+MODULE_DESCRIPTION("Analog Devices adp5061 battery charger driver");
+MODULE_AUTHOR("Stefan Popa <stefan.popa@analog.com>");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/power/supply/apm_power.c b/drivers/power/supply/apm_power.c
new file mode 100644
index 000000000..9d1a7fbca
--- /dev/null
+++ b/drivers/power/supply/apm_power.c
@@ -0,0 +1,376 @@
+/*
+ * Copyright © 2007 Anton Vorontsov <cbou@mail.ru>
+ * Copyright © 2007 Eugeny Boger <eugenyboger@dgap.mipt.ru>
+ *
+ * Author: Eugeny Boger <eugenyboger@dgap.mipt.ru>
+ *
+ * Use consistent with the GNU GPL is permitted,
+ * provided that this copyright notice is
+ * preserved in its entirety in all copies and derived works.
+ */
+
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/power_supply.h>
+#include <linux/apm-emulation.h>
+
+
+#define PSY_PROP(psy, prop, val) (power_supply_get_property(psy, \
+ POWER_SUPPLY_PROP_##prop, val))
+
+#define _MPSY_PROP(prop, val) (power_supply_get_property(main_battery, \
+ prop, val))
+
+#define MPSY_PROP(prop, val) _MPSY_PROP(POWER_SUPPLY_PROP_##prop, val)
+
+static DEFINE_MUTEX(apm_mutex);
+static struct power_supply *main_battery;
+
+enum apm_source {
+ SOURCE_ENERGY,
+ SOURCE_CHARGE,
+ SOURCE_VOLTAGE,
+};
+
+struct find_bat_param {
+ struct power_supply *main;
+ struct power_supply *bat;
+ struct power_supply *max_charge_bat;
+ struct power_supply *max_energy_bat;
+ union power_supply_propval full;
+ int max_charge;
+ int max_energy;
+};
+
+static int __find_main_battery(struct device *dev, void *data)
+{
+ struct find_bat_param *bp = (struct find_bat_param *)data;
+
+ bp->bat = dev_get_drvdata(dev);
+
+ if (bp->bat->desc->use_for_apm) {
+ /* nice, we explicitly asked to report this battery. */
+ bp->main = bp->bat;
+ return 1;
+ }
+
+ if (!PSY_PROP(bp->bat, CHARGE_FULL_DESIGN, &bp->full) ||
+ !PSY_PROP(bp->bat, CHARGE_FULL, &bp->full)) {
+ if (bp->full.intval > bp->max_charge) {
+ bp->max_charge_bat = bp->bat;
+ bp->max_charge = bp->full.intval;
+ }
+ } else if (!PSY_PROP(bp->bat, ENERGY_FULL_DESIGN, &bp->full) ||
+ !PSY_PROP(bp->bat, ENERGY_FULL, &bp->full)) {
+ if (bp->full.intval > bp->max_energy) {
+ bp->max_energy_bat = bp->bat;
+ bp->max_energy = bp->full.intval;
+ }
+ }
+ return 0;
+}
+
+static void find_main_battery(void)
+{
+ struct find_bat_param bp;
+ int error;
+
+ memset(&bp, 0, sizeof(struct find_bat_param));
+ main_battery = NULL;
+ bp.main = main_battery;
+
+ error = class_for_each_device(power_supply_class, NULL, &bp,
+ __find_main_battery);
+ if (error) {
+ main_battery = bp.main;
+ return;
+ }
+
+ if ((bp.max_energy_bat && bp.max_charge_bat) &&
+ (bp.max_energy_bat != bp.max_charge_bat)) {
+ /* try guess battery with more capacity */
+ if (!PSY_PROP(bp.max_charge_bat, VOLTAGE_MAX_DESIGN,
+ &bp.full)) {
+ if (bp.max_energy > bp.max_charge * bp.full.intval)
+ main_battery = bp.max_energy_bat;
+ else
+ main_battery = bp.max_charge_bat;
+ } else if (!PSY_PROP(bp.max_energy_bat, VOLTAGE_MAX_DESIGN,
+ &bp.full)) {
+ if (bp.max_charge > bp.max_energy / bp.full.intval)
+ main_battery = bp.max_charge_bat;
+ else
+ main_battery = bp.max_energy_bat;
+ } else {
+ /* give up, choice any */
+ main_battery = bp.max_energy_bat;
+ }
+ } else if (bp.max_charge_bat) {
+ main_battery = bp.max_charge_bat;
+ } else if (bp.max_energy_bat) {
+ main_battery = bp.max_energy_bat;
+ } else {
+ /* give up, try the last if any */
+ main_battery = bp.bat;
+ }
+}
+
+static int do_calculate_time(int status, enum apm_source source)
+{
+ union power_supply_propval full;
+ union power_supply_propval empty;
+ union power_supply_propval cur;
+ union power_supply_propval I;
+ enum power_supply_property full_prop;
+ enum power_supply_property full_design_prop;
+ enum power_supply_property empty_prop;
+ enum power_supply_property empty_design_prop;
+ enum power_supply_property cur_avg_prop;
+ enum power_supply_property cur_now_prop;
+
+ if (MPSY_PROP(CURRENT_AVG, &I)) {
+ /* if battery can't report average value, use momentary */
+ if (MPSY_PROP(CURRENT_NOW, &I))
+ return -1;
+ }
+
+ if (!I.intval)
+ return 0;
+
+ switch (source) {
+ case SOURCE_CHARGE:
+ full_prop = POWER_SUPPLY_PROP_CHARGE_FULL;
+ full_design_prop = POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN;
+ empty_prop = POWER_SUPPLY_PROP_CHARGE_EMPTY;
+ empty_design_prop = POWER_SUPPLY_PROP_CHARGE_EMPTY;
+ cur_avg_prop = POWER_SUPPLY_PROP_CHARGE_AVG;
+ cur_now_prop = POWER_SUPPLY_PROP_CHARGE_NOW;
+ break;
+ case SOURCE_ENERGY:
+ full_prop = POWER_SUPPLY_PROP_ENERGY_FULL;
+ full_design_prop = POWER_SUPPLY_PROP_ENERGY_FULL_DESIGN;
+ empty_prop = POWER_SUPPLY_PROP_ENERGY_EMPTY;
+ empty_design_prop = POWER_SUPPLY_PROP_CHARGE_EMPTY;
+ cur_avg_prop = POWER_SUPPLY_PROP_ENERGY_AVG;
+ cur_now_prop = POWER_SUPPLY_PROP_ENERGY_NOW;
+ break;
+ case SOURCE_VOLTAGE:
+ full_prop = POWER_SUPPLY_PROP_VOLTAGE_MAX;
+ full_design_prop = POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN;
+ empty_prop = POWER_SUPPLY_PROP_VOLTAGE_MIN;
+ empty_design_prop = POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN;
+ cur_avg_prop = POWER_SUPPLY_PROP_VOLTAGE_AVG;
+ cur_now_prop = POWER_SUPPLY_PROP_VOLTAGE_NOW;
+ break;
+ default:
+ printk(KERN_ERR "Unsupported source: %d\n", source);
+ return -1;
+ }
+
+ if (_MPSY_PROP(full_prop, &full)) {
+ /* if battery can't report this property, use design value */
+ if (_MPSY_PROP(full_design_prop, &full))
+ return -1;
+ }
+
+ if (_MPSY_PROP(empty_prop, &empty)) {
+ /* if battery can't report this property, use design value */
+ if (_MPSY_PROP(empty_design_prop, &empty))
+ empty.intval = 0;
+ }
+
+ if (_MPSY_PROP(cur_avg_prop, &cur)) {
+ /* if battery can't report average value, use momentary */
+ if (_MPSY_PROP(cur_now_prop, &cur))
+ return -1;
+ }
+
+ if (status == POWER_SUPPLY_STATUS_CHARGING)
+ return ((cur.intval - full.intval) * 60L) / I.intval;
+ else
+ return -((cur.intval - empty.intval) * 60L) / I.intval;
+}
+
+static int calculate_time(int status)
+{
+ int time;
+
+ time = do_calculate_time(status, SOURCE_ENERGY);
+ if (time != -1)
+ return time;
+
+ time = do_calculate_time(status, SOURCE_CHARGE);
+ if (time != -1)
+ return time;
+
+ time = do_calculate_time(status, SOURCE_VOLTAGE);
+ if (time != -1)
+ return time;
+
+ return -1;
+}
+
+static int calculate_capacity(enum apm_source source)
+{
+ enum power_supply_property full_prop, empty_prop;
+ enum power_supply_property full_design_prop, empty_design_prop;
+ enum power_supply_property now_prop, avg_prop;
+ union power_supply_propval empty, full, cur;
+ int ret;
+
+ switch (source) {
+ case SOURCE_CHARGE:
+ full_prop = POWER_SUPPLY_PROP_CHARGE_FULL;
+ empty_prop = POWER_SUPPLY_PROP_CHARGE_EMPTY;
+ full_design_prop = POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN;
+ empty_design_prop = POWER_SUPPLY_PROP_CHARGE_EMPTY_DESIGN;
+ now_prop = POWER_SUPPLY_PROP_CHARGE_NOW;
+ avg_prop = POWER_SUPPLY_PROP_CHARGE_AVG;
+ break;
+ case SOURCE_ENERGY:
+ full_prop = POWER_SUPPLY_PROP_ENERGY_FULL;
+ empty_prop = POWER_SUPPLY_PROP_ENERGY_EMPTY;
+ full_design_prop = POWER_SUPPLY_PROP_ENERGY_FULL_DESIGN;
+ empty_design_prop = POWER_SUPPLY_PROP_ENERGY_EMPTY_DESIGN;
+ now_prop = POWER_SUPPLY_PROP_ENERGY_NOW;
+ avg_prop = POWER_SUPPLY_PROP_ENERGY_AVG;
+ break;
+ case SOURCE_VOLTAGE:
+ full_prop = POWER_SUPPLY_PROP_VOLTAGE_MAX;
+ empty_prop = POWER_SUPPLY_PROP_VOLTAGE_MIN;
+ full_design_prop = POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN;
+ empty_design_prop = POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN;
+ now_prop = POWER_SUPPLY_PROP_VOLTAGE_NOW;
+ avg_prop = POWER_SUPPLY_PROP_VOLTAGE_AVG;
+ break;
+ default:
+ printk(KERN_ERR "Unsupported source: %d\n", source);
+ return -1;
+ }
+
+ if (_MPSY_PROP(full_prop, &full)) {
+ /* if battery can't report this property, use design value */
+ if (_MPSY_PROP(full_design_prop, &full))
+ return -1;
+ }
+
+ if (_MPSY_PROP(avg_prop, &cur)) {
+ /* if battery can't report average value, use momentary */
+ if (_MPSY_PROP(now_prop, &cur))
+ return -1;
+ }
+
+ if (_MPSY_PROP(empty_prop, &empty)) {
+ /* if battery can't report this property, use design value */
+ if (_MPSY_PROP(empty_design_prop, &empty))
+ empty.intval = 0;
+ }
+
+ if (full.intval - empty.intval)
+ ret = ((cur.intval - empty.intval) * 100L) /
+ (full.intval - empty.intval);
+ else
+ return -1;
+
+ if (ret > 100)
+ return 100;
+ else if (ret < 0)
+ return 0;
+
+ return ret;
+}
+
+static void apm_battery_apm_get_power_status(struct apm_power_info *info)
+{
+ union power_supply_propval status;
+ union power_supply_propval capacity, time_to_full, time_to_empty;
+
+ mutex_lock(&apm_mutex);
+ find_main_battery();
+ if (!main_battery) {
+ mutex_unlock(&apm_mutex);
+ return;
+ }
+
+ /* status */
+
+ if (MPSY_PROP(STATUS, &status))
+ status.intval = POWER_SUPPLY_STATUS_UNKNOWN;
+
+ /* ac line status */
+
+ if ((status.intval == POWER_SUPPLY_STATUS_CHARGING) ||
+ (status.intval == POWER_SUPPLY_STATUS_NOT_CHARGING) ||
+ (status.intval == POWER_SUPPLY_STATUS_FULL))
+ info->ac_line_status = APM_AC_ONLINE;
+ else
+ info->ac_line_status = APM_AC_OFFLINE;
+
+ /* battery life (i.e. capacity, in percents) */
+
+ if (MPSY_PROP(CAPACITY, &capacity) == 0) {
+ info->battery_life = capacity.intval;
+ } else {
+ /* try calculate using energy */
+ info->battery_life = calculate_capacity(SOURCE_ENERGY);
+ /* if failed try calculate using charge instead */
+ if (info->battery_life == -1)
+ info->battery_life = calculate_capacity(SOURCE_CHARGE);
+ if (info->battery_life == -1)
+ info->battery_life = calculate_capacity(SOURCE_VOLTAGE);
+ }
+
+ /* charging status */
+
+ if (status.intval == POWER_SUPPLY_STATUS_CHARGING) {
+ info->battery_status = APM_BATTERY_STATUS_CHARGING;
+ } else {
+ if (info->battery_life > 50)
+ info->battery_status = APM_BATTERY_STATUS_HIGH;
+ else if (info->battery_life > 5)
+ info->battery_status = APM_BATTERY_STATUS_LOW;
+ else
+ info->battery_status = APM_BATTERY_STATUS_CRITICAL;
+ }
+ info->battery_flag = info->battery_status;
+
+ /* time */
+
+ info->units = APM_UNITS_MINS;
+
+ if (status.intval == POWER_SUPPLY_STATUS_CHARGING) {
+ if (!MPSY_PROP(TIME_TO_FULL_AVG, &time_to_full) ||
+ !MPSY_PROP(TIME_TO_FULL_NOW, &time_to_full))
+ info->time = time_to_full.intval / 60;
+ else
+ info->time = calculate_time(status.intval);
+ } else {
+ if (!MPSY_PROP(TIME_TO_EMPTY_AVG, &time_to_empty) ||
+ !MPSY_PROP(TIME_TO_EMPTY_NOW, &time_to_empty))
+ info->time = time_to_empty.intval / 60;
+ else
+ info->time = calculate_time(status.intval);
+ }
+
+ mutex_unlock(&apm_mutex);
+}
+
+static int __init apm_battery_init(void)
+{
+ printk(KERN_INFO "APM Battery Driver\n");
+
+ apm_get_power_status = apm_battery_apm_get_power_status;
+ return 0;
+}
+
+static void __exit apm_battery_exit(void)
+{
+ apm_get_power_status = NULL;
+}
+
+module_init(apm_battery_init);
+module_exit(apm_battery_exit);
+
+MODULE_AUTHOR("Eugeny Boger <eugenyboger@dgap.mipt.ru>");
+MODULE_DESCRIPTION("APM emulation driver for battery monitoring class");
+MODULE_LICENSE("GPL");
diff --git a/drivers/power/supply/axp20x_ac_power.c b/drivers/power/supply/axp20x_ac_power.c
new file mode 100644
index 000000000..ac360016b
--- /dev/null
+++ b/drivers/power/supply/axp20x_ac_power.c
@@ -0,0 +1,426 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * AXP20X and AXP22X PMICs' ACIN power supply driver
+ *
+ * Copyright (C) 2016 Free Electrons
+ * Quentin Schulz <quentin.schulz@free-electrons.com>
+ */
+
+#include <linux/device.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/mfd/axp20x.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/pm.h>
+#include <linux/power_supply.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+#include <linux/iio/consumer.h>
+
+#define AXP20X_PWR_STATUS_ACIN_PRESENT BIT(7)
+#define AXP20X_PWR_STATUS_ACIN_AVAIL BIT(6)
+
+#define AXP813_ACIN_PATH_SEL BIT(7)
+#define AXP813_ACIN_PATH_SEL_TO_BIT(x) (!!(x) << 7)
+
+#define AXP813_VHOLD_MASK GENMASK(5, 3)
+#define AXP813_VHOLD_UV_TO_BIT(x) ((((x) / 100000) - 40) << 3)
+#define AXP813_VHOLD_REG_TO_UV(x) \
+ (((((x) & AXP813_VHOLD_MASK) >> 3) + 40) * 100000)
+
+#define AXP813_CURR_LIMIT_MASK GENMASK(2, 0)
+#define AXP813_CURR_LIMIT_UA_TO_BIT(x) (((x) / 500000) - 3)
+#define AXP813_CURR_LIMIT_REG_TO_UA(x) \
+ ((((x) & AXP813_CURR_LIMIT_MASK) + 3) * 500000)
+
+#define DRVNAME "axp20x-ac-power-supply"
+
+struct axp20x_ac_power {
+ struct regmap *regmap;
+ struct power_supply *supply;
+ struct iio_channel *acin_v;
+ struct iio_channel *acin_i;
+ bool has_acin_path_sel;
+ unsigned int num_irqs;
+ unsigned int irqs[];
+};
+
+static irqreturn_t axp20x_ac_power_irq(int irq, void *devid)
+{
+ struct axp20x_ac_power *power = devid;
+
+ power_supply_changed(power->supply);
+
+ return IRQ_HANDLED;
+}
+
+static int axp20x_ac_power_get_property(struct power_supply *psy,
+ enum power_supply_property psp,
+ union power_supply_propval *val)
+{
+ struct axp20x_ac_power *power = power_supply_get_drvdata(psy);
+ int ret, reg;
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_HEALTH:
+ ret = regmap_read(power->regmap, AXP20X_PWR_INPUT_STATUS, &reg);
+ if (ret)
+ return ret;
+
+ if (reg & AXP20X_PWR_STATUS_ACIN_PRESENT) {
+ val->intval = POWER_SUPPLY_HEALTH_GOOD;
+ return 0;
+ }
+
+ val->intval = POWER_SUPPLY_HEALTH_UNKNOWN;
+ return 0;
+
+ case POWER_SUPPLY_PROP_PRESENT:
+ ret = regmap_read(power->regmap, AXP20X_PWR_INPUT_STATUS, &reg);
+ if (ret)
+ return ret;
+
+ val->intval = !!(reg & AXP20X_PWR_STATUS_ACIN_PRESENT);
+ return 0;
+
+ case POWER_SUPPLY_PROP_ONLINE:
+ ret = regmap_read(power->regmap, AXP20X_PWR_INPUT_STATUS, &reg);
+ if (ret)
+ return ret;
+
+ val->intval = !!(reg & AXP20X_PWR_STATUS_ACIN_AVAIL);
+
+ /* ACIN_PATH_SEL disables ACIN even if ACIN_AVAIL is set. */
+ if (val->intval && power->has_acin_path_sel) {
+ ret = regmap_read(power->regmap, AXP813_ACIN_PATH_CTRL,
+ &reg);
+ if (ret)
+ return ret;
+
+ val->intval = !!(reg & AXP813_ACIN_PATH_SEL);
+ }
+
+ return 0;
+
+ case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+ ret = iio_read_channel_processed(power->acin_v, &val->intval);
+ if (ret)
+ return ret;
+
+ /* IIO framework gives mV but Power Supply framework gives uV */
+ val->intval *= 1000;
+
+ return 0;
+
+ case POWER_SUPPLY_PROP_CURRENT_NOW:
+ ret = iio_read_channel_processed(power->acin_i, &val->intval);
+ if (ret)
+ return ret;
+
+ /* IIO framework gives mA but Power Supply framework gives uA */
+ val->intval *= 1000;
+
+ return 0;
+
+ case POWER_SUPPLY_PROP_VOLTAGE_MIN:
+ ret = regmap_read(power->regmap, AXP813_ACIN_PATH_CTRL, &reg);
+ if (ret)
+ return ret;
+
+ val->intval = AXP813_VHOLD_REG_TO_UV(reg);
+
+ return 0;
+
+ case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT:
+ ret = regmap_read(power->regmap, AXP813_ACIN_PATH_CTRL, &reg);
+ if (ret)
+ return ret;
+
+ val->intval = AXP813_CURR_LIMIT_REG_TO_UA(reg);
+ /* AXP813 datasheet defines values 11x as 4000mA */
+ if (val->intval > 4000000)
+ val->intval = 4000000;
+
+ return 0;
+
+ default:
+ return -EINVAL;
+ }
+
+ return -EINVAL;
+}
+
+static int axp813_ac_power_set_property(struct power_supply *psy,
+ enum power_supply_property psp,
+ const union power_supply_propval *val)
+{
+ struct axp20x_ac_power *power = power_supply_get_drvdata(psy);
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_ONLINE:
+ return regmap_update_bits(power->regmap, AXP813_ACIN_PATH_CTRL,
+ AXP813_ACIN_PATH_SEL,
+ AXP813_ACIN_PATH_SEL_TO_BIT(val->intval));
+
+ case POWER_SUPPLY_PROP_VOLTAGE_MIN:
+ if (val->intval < 4000000 || val->intval > 4700000)
+ return -EINVAL;
+
+ return regmap_update_bits(power->regmap, AXP813_ACIN_PATH_CTRL,
+ AXP813_VHOLD_MASK,
+ AXP813_VHOLD_UV_TO_BIT(val->intval));
+
+ case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT:
+ if (val->intval < 1500000 || val->intval > 4000000)
+ return -EINVAL;
+
+ return regmap_update_bits(power->regmap, AXP813_ACIN_PATH_CTRL,
+ AXP813_CURR_LIMIT_MASK,
+ AXP813_CURR_LIMIT_UA_TO_BIT(val->intval));
+
+ default:
+ return -EINVAL;
+ }
+
+ return -EINVAL;
+}
+
+static int axp813_ac_power_prop_writeable(struct power_supply *psy,
+ enum power_supply_property psp)
+{
+ return psp == POWER_SUPPLY_PROP_ONLINE ||
+ psp == POWER_SUPPLY_PROP_VOLTAGE_MIN ||
+ psp == POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT;
+}
+
+static enum power_supply_property axp20x_ac_power_properties[] = {
+ POWER_SUPPLY_PROP_HEALTH,
+ POWER_SUPPLY_PROP_PRESENT,
+ POWER_SUPPLY_PROP_ONLINE,
+ POWER_SUPPLY_PROP_VOLTAGE_NOW,
+ POWER_SUPPLY_PROP_CURRENT_NOW,
+};
+
+static enum power_supply_property axp22x_ac_power_properties[] = {
+ POWER_SUPPLY_PROP_HEALTH,
+ POWER_SUPPLY_PROP_PRESENT,
+ POWER_SUPPLY_PROP_ONLINE,
+};
+
+static enum power_supply_property axp813_ac_power_properties[] = {
+ POWER_SUPPLY_PROP_HEALTH,
+ POWER_SUPPLY_PROP_PRESENT,
+ POWER_SUPPLY_PROP_ONLINE,
+ POWER_SUPPLY_PROP_VOLTAGE_MIN,
+ POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT,
+};
+
+static const struct power_supply_desc axp20x_ac_power_desc = {
+ .name = "axp20x-ac",
+ .type = POWER_SUPPLY_TYPE_MAINS,
+ .properties = axp20x_ac_power_properties,
+ .num_properties = ARRAY_SIZE(axp20x_ac_power_properties),
+ .get_property = axp20x_ac_power_get_property,
+};
+
+static const struct power_supply_desc axp22x_ac_power_desc = {
+ .name = "axp22x-ac",
+ .type = POWER_SUPPLY_TYPE_MAINS,
+ .properties = axp22x_ac_power_properties,
+ .num_properties = ARRAY_SIZE(axp22x_ac_power_properties),
+ .get_property = axp20x_ac_power_get_property,
+};
+
+static const struct power_supply_desc axp813_ac_power_desc = {
+ .name = "axp813-ac",
+ .type = POWER_SUPPLY_TYPE_MAINS,
+ .properties = axp813_ac_power_properties,
+ .num_properties = ARRAY_SIZE(axp813_ac_power_properties),
+ .property_is_writeable = axp813_ac_power_prop_writeable,
+ .get_property = axp20x_ac_power_get_property,
+ .set_property = axp813_ac_power_set_property,
+};
+
+static const char * const axp20x_irq_names[] = {
+ "ACIN_PLUGIN",
+ "ACIN_REMOVAL",
+};
+
+struct axp_data {
+ const struct power_supply_desc *power_desc;
+ const char * const *irq_names;
+ unsigned int num_irq_names;
+ bool acin_adc;
+ bool acin_path_sel;
+};
+
+static const struct axp_data axp20x_data = {
+ .power_desc = &axp20x_ac_power_desc,
+ .irq_names = axp20x_irq_names,
+ .num_irq_names = ARRAY_SIZE(axp20x_irq_names),
+ .acin_adc = true,
+ .acin_path_sel = false,
+};
+
+static const struct axp_data axp22x_data = {
+ .power_desc = &axp22x_ac_power_desc,
+ .irq_names = axp20x_irq_names,
+ .num_irq_names = ARRAY_SIZE(axp20x_irq_names),
+ .acin_adc = false,
+ .acin_path_sel = false,
+};
+
+static const struct axp_data axp813_data = {
+ .power_desc = &axp813_ac_power_desc,
+ .irq_names = axp20x_irq_names,
+ .num_irq_names = ARRAY_SIZE(axp20x_irq_names),
+ .acin_adc = false,
+ .acin_path_sel = true,
+};
+
+#ifdef CONFIG_PM_SLEEP
+static int axp20x_ac_power_suspend(struct device *dev)
+{
+ struct axp20x_ac_power *power = dev_get_drvdata(dev);
+ int i = 0;
+
+ /*
+ * Allow wake via ACIN_PLUGIN only.
+ *
+ * As nested threaded IRQs are not automatically disabled during
+ * suspend, we must explicitly disable the remainder of the IRQs.
+ */
+ if (device_may_wakeup(&power->supply->dev))
+ enable_irq_wake(power->irqs[i++]);
+ while (i < power->num_irqs)
+ disable_irq(power->irqs[i++]);
+
+ return 0;
+}
+
+static int axp20x_ac_power_resume(struct device *dev)
+{
+ struct axp20x_ac_power *power = dev_get_drvdata(dev);
+ int i = 0;
+
+ if (device_may_wakeup(&power->supply->dev))
+ disable_irq_wake(power->irqs[i++]);
+ while (i < power->num_irqs)
+ enable_irq(power->irqs[i++]);
+
+ return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(axp20x_ac_power_pm_ops, axp20x_ac_power_suspend,
+ axp20x_ac_power_resume);
+
+static int axp20x_ac_power_probe(struct platform_device *pdev)
+{
+ struct axp20x_dev *axp20x = dev_get_drvdata(pdev->dev.parent);
+ struct power_supply_config psy_cfg = {};
+ struct axp20x_ac_power *power;
+ const struct axp_data *axp_data;
+ int i, irq, ret;
+
+ if (!of_device_is_available(pdev->dev.of_node))
+ return -ENODEV;
+
+ if (!axp20x) {
+ dev_err(&pdev->dev, "Parent drvdata not set\n");
+ return -EINVAL;
+ }
+
+ axp_data = of_device_get_match_data(&pdev->dev);
+
+ power = devm_kzalloc(&pdev->dev,
+ struct_size(power, irqs, axp_data->num_irq_names),
+ GFP_KERNEL);
+ if (!power)
+ return -ENOMEM;
+
+ if (axp_data->acin_adc) {
+ power->acin_v = devm_iio_channel_get(&pdev->dev, "acin_v");
+ if (IS_ERR(power->acin_v)) {
+ if (PTR_ERR(power->acin_v) == -ENODEV)
+ return -EPROBE_DEFER;
+ return PTR_ERR(power->acin_v);
+ }
+
+ power->acin_i = devm_iio_channel_get(&pdev->dev, "acin_i");
+ if (IS_ERR(power->acin_i)) {
+ if (PTR_ERR(power->acin_i) == -ENODEV)
+ return -EPROBE_DEFER;
+ return PTR_ERR(power->acin_i);
+ }
+ }
+
+ power->regmap = dev_get_regmap(pdev->dev.parent, NULL);
+ power->has_acin_path_sel = axp_data->acin_path_sel;
+ power->num_irqs = axp_data->num_irq_names;
+
+ platform_set_drvdata(pdev, power);
+
+ psy_cfg.of_node = pdev->dev.of_node;
+ psy_cfg.drv_data = power;
+
+ power->supply = devm_power_supply_register(&pdev->dev,
+ axp_data->power_desc,
+ &psy_cfg);
+ if (IS_ERR(power->supply))
+ return PTR_ERR(power->supply);
+
+ /* Request irqs after registering, as irqs may trigger immediately */
+ for (i = 0; i < axp_data->num_irq_names; i++) {
+ irq = platform_get_irq_byname(pdev, axp_data->irq_names[i]);
+ if (irq < 0) {
+ dev_err(&pdev->dev, "No IRQ for %s: %d\n",
+ axp_data->irq_names[i], irq);
+ return irq;
+ }
+ power->irqs[i] = regmap_irq_get_virq(axp20x->regmap_irqc, irq);
+ ret = devm_request_any_context_irq(&pdev->dev, power->irqs[i],
+ axp20x_ac_power_irq, 0,
+ DRVNAME, power);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "Error requesting %s IRQ: %d\n",
+ axp_data->irq_names[i], ret);
+ return ret;
+ }
+ }
+
+ return 0;
+}
+
+static const struct of_device_id axp20x_ac_power_match[] = {
+ {
+ .compatible = "x-powers,axp202-ac-power-supply",
+ .data = &axp20x_data,
+ }, {
+ .compatible = "x-powers,axp221-ac-power-supply",
+ .data = &axp22x_data,
+ }, {
+ .compatible = "x-powers,axp813-ac-power-supply",
+ .data = &axp813_data,
+ }, { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, axp20x_ac_power_match);
+
+static struct platform_driver axp20x_ac_power_driver = {
+ .probe = axp20x_ac_power_probe,
+ .driver = {
+ .name = DRVNAME,
+ .of_match_table = axp20x_ac_power_match,
+ .pm = &axp20x_ac_power_pm_ops,
+ },
+};
+
+module_platform_driver(axp20x_ac_power_driver);
+
+MODULE_AUTHOR("Quentin Schulz <quentin.schulz@free-electrons.com>");
+MODULE_DESCRIPTION("AXP20X and AXP22X PMICs' AC power supply driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/power/supply/axp20x_battery.c b/drivers/power/supply/axp20x_battery.c
new file mode 100644
index 000000000..9fda98b95
--- /dev/null
+++ b/drivers/power/supply/axp20x_battery.c
@@ -0,0 +1,647 @@
+/*
+ * Battery power supply driver for X-Powers AXP20X and AXP22X PMICs
+ *
+ * Copyright 2016 Free Electrons NextThing Co.
+ * Quentin Schulz <quentin.schulz@free-electrons.com>
+ *
+ * This driver is based on a previous upstreaming attempt by:
+ * Bruno Prémont <bonbons@linux-vserver.org>
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License. See the file "COPYING" in the main directory of this
+ * archive for more details.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/err.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/power_supply.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+#include <linux/time.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/consumer.h>
+#include <linux/mfd/axp20x.h>
+
+#define AXP20X_PWR_STATUS_BAT_CHARGING BIT(2)
+
+#define AXP20X_PWR_OP_BATT_PRESENT BIT(5)
+#define AXP20X_PWR_OP_BATT_ACTIVATED BIT(3)
+
+#define AXP209_FG_PERCENT GENMASK(6, 0)
+#define AXP22X_FG_VALID BIT(7)
+
+#define AXP20X_CHRG_CTRL1_TGT_VOLT GENMASK(6, 5)
+#define AXP20X_CHRG_CTRL1_TGT_4_1V (0 << 5)
+#define AXP20X_CHRG_CTRL1_TGT_4_15V (1 << 5)
+#define AXP20X_CHRG_CTRL1_TGT_4_2V (2 << 5)
+#define AXP20X_CHRG_CTRL1_TGT_4_36V (3 << 5)
+
+#define AXP22X_CHRG_CTRL1_TGT_4_22V (1 << 5)
+#define AXP22X_CHRG_CTRL1_TGT_4_24V (3 << 5)
+
+#define AXP813_CHRG_CTRL1_TGT_4_35V (3 << 5)
+
+#define AXP20X_CHRG_CTRL1_TGT_CURR GENMASK(3, 0)
+
+#define AXP20X_V_OFF_MASK GENMASK(2, 0)
+
+struct axp20x_batt_ps;
+
+struct axp_data {
+ int ccc_scale;
+ int ccc_offset;
+ bool has_fg_valid;
+ int (*get_max_voltage)(struct axp20x_batt_ps *batt, int *val);
+ int (*set_max_voltage)(struct axp20x_batt_ps *batt, int val);
+};
+
+struct axp20x_batt_ps {
+ struct regmap *regmap;
+ struct power_supply *batt;
+ struct device *dev;
+ struct iio_channel *batt_chrg_i;
+ struct iio_channel *batt_dischrg_i;
+ struct iio_channel *batt_v;
+ /* Maximum constant charge current */
+ unsigned int max_ccc;
+ const struct axp_data *data;
+};
+
+static int axp20x_battery_get_max_voltage(struct axp20x_batt_ps *axp20x_batt,
+ int *val)
+{
+ int ret, reg;
+
+ ret = regmap_read(axp20x_batt->regmap, AXP20X_CHRG_CTRL1, &reg);
+ if (ret)
+ return ret;
+
+ switch (reg & AXP20X_CHRG_CTRL1_TGT_VOLT) {
+ case AXP20X_CHRG_CTRL1_TGT_4_1V:
+ *val = 4100000;
+ break;
+ case AXP20X_CHRG_CTRL1_TGT_4_15V:
+ *val = 4150000;
+ break;
+ case AXP20X_CHRG_CTRL1_TGT_4_2V:
+ *val = 4200000;
+ break;
+ case AXP20X_CHRG_CTRL1_TGT_4_36V:
+ *val = 4360000;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int axp22x_battery_get_max_voltage(struct axp20x_batt_ps *axp20x_batt,
+ int *val)
+{
+ int ret, reg;
+
+ ret = regmap_read(axp20x_batt->regmap, AXP20X_CHRG_CTRL1, &reg);
+ if (ret)
+ return ret;
+
+ switch (reg & AXP20X_CHRG_CTRL1_TGT_VOLT) {
+ case AXP20X_CHRG_CTRL1_TGT_4_1V:
+ *val = 4100000;
+ break;
+ case AXP20X_CHRG_CTRL1_TGT_4_2V:
+ *val = 4200000;
+ break;
+ case AXP22X_CHRG_CTRL1_TGT_4_22V:
+ *val = 4220000;
+ break;
+ case AXP22X_CHRG_CTRL1_TGT_4_24V:
+ *val = 4240000;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int axp813_battery_get_max_voltage(struct axp20x_batt_ps *axp20x_batt,
+ int *val)
+{
+ int ret, reg;
+
+ ret = regmap_read(axp20x_batt->regmap, AXP20X_CHRG_CTRL1, &reg);
+ if (ret)
+ return ret;
+
+ switch (reg & AXP20X_CHRG_CTRL1_TGT_VOLT) {
+ case AXP20X_CHRG_CTRL1_TGT_4_1V:
+ *val = 4100000;
+ break;
+ case AXP20X_CHRG_CTRL1_TGT_4_15V:
+ *val = 4150000;
+ break;
+ case AXP20X_CHRG_CTRL1_TGT_4_2V:
+ *val = 4200000;
+ break;
+ case AXP813_CHRG_CTRL1_TGT_4_35V:
+ *val = 4350000;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int axp20x_get_constant_charge_current(struct axp20x_batt_ps *axp,
+ int *val)
+{
+ int ret;
+
+ ret = regmap_read(axp->regmap, AXP20X_CHRG_CTRL1, val);
+ if (ret)
+ return ret;
+
+ *val &= AXP20X_CHRG_CTRL1_TGT_CURR;
+
+ *val = *val * axp->data->ccc_scale + axp->data->ccc_offset;
+
+ return 0;
+}
+
+static int axp20x_battery_get_prop(struct power_supply *psy,
+ enum power_supply_property psp,
+ union power_supply_propval *val)
+{
+ struct axp20x_batt_ps *axp20x_batt = power_supply_get_drvdata(psy);
+ int ret = 0, reg, val1;
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_PRESENT:
+ case POWER_SUPPLY_PROP_ONLINE:
+ ret = regmap_read(axp20x_batt->regmap, AXP20X_PWR_OP_MODE,
+ &reg);
+ if (ret)
+ return ret;
+
+ val->intval = !!(reg & AXP20X_PWR_OP_BATT_PRESENT);
+ break;
+
+ case POWER_SUPPLY_PROP_STATUS:
+ ret = regmap_read(axp20x_batt->regmap, AXP20X_PWR_INPUT_STATUS,
+ &reg);
+ if (ret)
+ return ret;
+
+ if (reg & AXP20X_PWR_STATUS_BAT_CHARGING) {
+ val->intval = POWER_SUPPLY_STATUS_CHARGING;
+ return 0;
+ }
+
+ ret = iio_read_channel_processed(axp20x_batt->batt_dischrg_i,
+ &val1);
+ if (ret)
+ return ret;
+
+ if (val1) {
+ val->intval = POWER_SUPPLY_STATUS_DISCHARGING;
+ return 0;
+ }
+
+ ret = regmap_read(axp20x_batt->regmap, AXP20X_FG_RES, &val1);
+ if (ret)
+ return ret;
+
+ /*
+ * Fuel Gauge data takes 7 bits but the stored value seems to be
+ * directly the raw percentage without any scaling to 7 bits.
+ */
+ if ((val1 & AXP209_FG_PERCENT) == 100)
+ val->intval = POWER_SUPPLY_STATUS_FULL;
+ else
+ val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING;
+ break;
+
+ case POWER_SUPPLY_PROP_HEALTH:
+ ret = regmap_read(axp20x_batt->regmap, AXP20X_PWR_OP_MODE,
+ &val1);
+ if (ret)
+ return ret;
+
+ if (val1 & AXP20X_PWR_OP_BATT_ACTIVATED) {
+ val->intval = POWER_SUPPLY_HEALTH_DEAD;
+ return 0;
+ }
+
+ val->intval = POWER_SUPPLY_HEALTH_GOOD;
+ break;
+
+ case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT:
+ ret = axp20x_get_constant_charge_current(axp20x_batt,
+ &val->intval);
+ if (ret)
+ return ret;
+ break;
+
+ case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX:
+ val->intval = axp20x_batt->max_ccc;
+ break;
+
+ case POWER_SUPPLY_PROP_CURRENT_NOW:
+ ret = regmap_read(axp20x_batt->regmap, AXP20X_PWR_INPUT_STATUS,
+ &reg);
+ if (ret)
+ return ret;
+
+ if (reg & AXP20X_PWR_STATUS_BAT_CHARGING) {
+ ret = iio_read_channel_processed(axp20x_batt->batt_chrg_i, &val->intval);
+ } else {
+ ret = iio_read_channel_processed(axp20x_batt->batt_dischrg_i, &val1);
+ val->intval = -val1;
+ }
+ if (ret)
+ return ret;
+
+ /* IIO framework gives mA but Power Supply framework gives uA */
+ val->intval *= 1000;
+ break;
+
+ case POWER_SUPPLY_PROP_CAPACITY:
+ /* When no battery is present, return capacity is 100% */
+ ret = regmap_read(axp20x_batt->regmap, AXP20X_PWR_OP_MODE,
+ &reg);
+ if (ret)
+ return ret;
+
+ if (!(reg & AXP20X_PWR_OP_BATT_PRESENT)) {
+ val->intval = 100;
+ return 0;
+ }
+
+ ret = regmap_read(axp20x_batt->regmap, AXP20X_FG_RES, &reg);
+ if (ret)
+ return ret;
+
+ if (axp20x_batt->data->has_fg_valid && !(reg & AXP22X_FG_VALID))
+ return -EINVAL;
+
+ /*
+ * Fuel Gauge data takes 7 bits but the stored value seems to be
+ * directly the raw percentage without any scaling to 7 bits.
+ */
+ val->intval = reg & AXP209_FG_PERCENT;
+ break;
+
+ case POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN:
+ return axp20x_batt->data->get_max_voltage(axp20x_batt,
+ &val->intval);
+
+ case POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN:
+ ret = regmap_read(axp20x_batt->regmap, AXP20X_V_OFF, &reg);
+ if (ret)
+ return ret;
+
+ val->intval = 2600000 + 100000 * (reg & AXP20X_V_OFF_MASK);
+ break;
+
+ case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+ ret = iio_read_channel_processed(axp20x_batt->batt_v,
+ &val->intval);
+ if (ret)
+ return ret;
+
+ /* IIO framework gives mV but Power Supply framework gives uV */
+ val->intval *= 1000;
+ break;
+
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int axp22x_battery_set_max_voltage(struct axp20x_batt_ps *axp20x_batt,
+ int val)
+{
+ switch (val) {
+ case 4100000:
+ val = AXP20X_CHRG_CTRL1_TGT_4_1V;
+ break;
+
+ case 4200000:
+ val = AXP20X_CHRG_CTRL1_TGT_4_2V;
+ break;
+
+ default:
+ /*
+ * AXP20x max voltage can be set to 4.36V and AXP22X max voltage
+ * can be set to 4.22V and 4.24V, but these voltages are too
+ * high for Lithium based batteries (AXP PMICs are supposed to
+ * be used with these kinds of battery).
+ */
+ return -EINVAL;
+ }
+
+ return regmap_update_bits(axp20x_batt->regmap, AXP20X_CHRG_CTRL1,
+ AXP20X_CHRG_CTRL1_TGT_VOLT, val);
+}
+
+static int axp20x_battery_set_max_voltage(struct axp20x_batt_ps *axp20x_batt,
+ int val)
+{
+ switch (val) {
+ case 4100000:
+ val = AXP20X_CHRG_CTRL1_TGT_4_1V;
+ break;
+
+ case 4150000:
+ val = AXP20X_CHRG_CTRL1_TGT_4_15V;
+ break;
+
+ case 4200000:
+ val = AXP20X_CHRG_CTRL1_TGT_4_2V;
+ break;
+
+ default:
+ /*
+ * AXP20x max voltage can be set to 4.36V and AXP22X max voltage
+ * can be set to 4.22V and 4.24V, but these voltages are too
+ * high for Lithium based batteries (AXP PMICs are supposed to
+ * be used with these kinds of battery).
+ */
+ return -EINVAL;
+ }
+
+ return regmap_update_bits(axp20x_batt->regmap, AXP20X_CHRG_CTRL1,
+ AXP20X_CHRG_CTRL1_TGT_VOLT, val);
+}
+
+static int axp20x_set_constant_charge_current(struct axp20x_batt_ps *axp_batt,
+ int charge_current)
+{
+ if (charge_current > axp_batt->max_ccc)
+ return -EINVAL;
+
+ charge_current = (charge_current - axp_batt->data->ccc_offset) /
+ axp_batt->data->ccc_scale;
+
+ if (charge_current > AXP20X_CHRG_CTRL1_TGT_CURR || charge_current < 0)
+ return -EINVAL;
+
+ return regmap_update_bits(axp_batt->regmap, AXP20X_CHRG_CTRL1,
+ AXP20X_CHRG_CTRL1_TGT_CURR, charge_current);
+}
+
+static int axp20x_set_max_constant_charge_current(struct axp20x_batt_ps *axp,
+ int charge_current)
+{
+ bool lower_max = false;
+
+ charge_current = (charge_current - axp->data->ccc_offset) /
+ axp->data->ccc_scale;
+
+ if (charge_current > AXP20X_CHRG_CTRL1_TGT_CURR || charge_current < 0)
+ return -EINVAL;
+
+ charge_current = charge_current * axp->data->ccc_scale +
+ axp->data->ccc_offset;
+
+ if (charge_current > axp->max_ccc)
+ dev_warn(axp->dev,
+ "Setting max constant charge current higher than previously defined. Note that increasing the constant charge current may damage your battery.\n");
+ else
+ lower_max = true;
+
+ axp->max_ccc = charge_current;
+
+ if (lower_max) {
+ int current_cc;
+
+ axp20x_get_constant_charge_current(axp, &current_cc);
+ if (current_cc > charge_current)
+ axp20x_set_constant_charge_current(axp, charge_current);
+ }
+
+ return 0;
+}
+static int axp20x_set_voltage_min_design(struct axp20x_batt_ps *axp_batt,
+ int min_voltage)
+{
+ int val1 = (min_voltage - 2600000) / 100000;
+
+ if (val1 < 0 || val1 > AXP20X_V_OFF_MASK)
+ return -EINVAL;
+
+ return regmap_update_bits(axp_batt->regmap, AXP20X_V_OFF,
+ AXP20X_V_OFF_MASK, val1);
+}
+
+static int axp20x_battery_set_prop(struct power_supply *psy,
+ enum power_supply_property psp,
+ const union power_supply_propval *val)
+{
+ struct axp20x_batt_ps *axp20x_batt = power_supply_get_drvdata(psy);
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN:
+ return axp20x_set_voltage_min_design(axp20x_batt, val->intval);
+
+ case POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN:
+ return axp20x_batt->data->set_max_voltage(axp20x_batt, val->intval);
+
+ case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT:
+ return axp20x_set_constant_charge_current(axp20x_batt,
+ val->intval);
+ case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX:
+ return axp20x_set_max_constant_charge_current(axp20x_batt,
+ val->intval);
+
+ default:
+ return -EINVAL;
+ }
+}
+
+static enum power_supply_property axp20x_battery_props[] = {
+ POWER_SUPPLY_PROP_PRESENT,
+ POWER_SUPPLY_PROP_ONLINE,
+ POWER_SUPPLY_PROP_STATUS,
+ POWER_SUPPLY_PROP_VOLTAGE_NOW,
+ POWER_SUPPLY_PROP_CURRENT_NOW,
+ POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT,
+ POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX,
+ POWER_SUPPLY_PROP_HEALTH,
+ POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN,
+ POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN,
+ POWER_SUPPLY_PROP_CAPACITY,
+};
+
+static int axp20x_battery_prop_writeable(struct power_supply *psy,
+ enum power_supply_property psp)
+{
+ return psp == POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN ||
+ psp == POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN ||
+ psp == POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT ||
+ psp == POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX;
+}
+
+static const struct power_supply_desc axp20x_batt_ps_desc = {
+ .name = "axp20x-battery",
+ .type = POWER_SUPPLY_TYPE_BATTERY,
+ .properties = axp20x_battery_props,
+ .num_properties = ARRAY_SIZE(axp20x_battery_props),
+ .property_is_writeable = axp20x_battery_prop_writeable,
+ .get_property = axp20x_battery_get_prop,
+ .set_property = axp20x_battery_set_prop,
+};
+
+static const struct axp_data axp209_data = {
+ .ccc_scale = 100000,
+ .ccc_offset = 300000,
+ .get_max_voltage = axp20x_battery_get_max_voltage,
+ .set_max_voltage = axp20x_battery_set_max_voltage,
+};
+
+static const struct axp_data axp221_data = {
+ .ccc_scale = 150000,
+ .ccc_offset = 300000,
+ .has_fg_valid = true,
+ .get_max_voltage = axp22x_battery_get_max_voltage,
+ .set_max_voltage = axp22x_battery_set_max_voltage,
+};
+
+static const struct axp_data axp813_data = {
+ .ccc_scale = 200000,
+ .ccc_offset = 200000,
+ .has_fg_valid = true,
+ .get_max_voltage = axp813_battery_get_max_voltage,
+ .set_max_voltage = axp20x_battery_set_max_voltage,
+};
+
+static const struct of_device_id axp20x_battery_ps_id[] = {
+ {
+ .compatible = "x-powers,axp209-battery-power-supply",
+ .data = (void *)&axp209_data,
+ }, {
+ .compatible = "x-powers,axp221-battery-power-supply",
+ .data = (void *)&axp221_data,
+ }, {
+ .compatible = "x-powers,axp813-battery-power-supply",
+ .data = (void *)&axp813_data,
+ }, { /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, axp20x_battery_ps_id);
+
+static int axp20x_power_probe(struct platform_device *pdev)
+{
+ struct axp20x_batt_ps *axp20x_batt;
+ struct power_supply_config psy_cfg = {};
+ struct power_supply_battery_info info;
+ struct device *dev = &pdev->dev;
+
+ if (!of_device_is_available(pdev->dev.of_node))
+ return -ENODEV;
+
+ axp20x_batt = devm_kzalloc(&pdev->dev, sizeof(*axp20x_batt),
+ GFP_KERNEL);
+ if (!axp20x_batt)
+ return -ENOMEM;
+
+ axp20x_batt->dev = &pdev->dev;
+
+ axp20x_batt->batt_v = devm_iio_channel_get(&pdev->dev, "batt_v");
+ if (IS_ERR(axp20x_batt->batt_v)) {
+ if (PTR_ERR(axp20x_batt->batt_v) == -ENODEV)
+ return -EPROBE_DEFER;
+ return PTR_ERR(axp20x_batt->batt_v);
+ }
+
+ axp20x_batt->batt_chrg_i = devm_iio_channel_get(&pdev->dev,
+ "batt_chrg_i");
+ if (IS_ERR(axp20x_batt->batt_chrg_i)) {
+ if (PTR_ERR(axp20x_batt->batt_chrg_i) == -ENODEV)
+ return -EPROBE_DEFER;
+ return PTR_ERR(axp20x_batt->batt_chrg_i);
+ }
+
+ axp20x_batt->batt_dischrg_i = devm_iio_channel_get(&pdev->dev,
+ "batt_dischrg_i");
+ if (IS_ERR(axp20x_batt->batt_dischrg_i)) {
+ if (PTR_ERR(axp20x_batt->batt_dischrg_i) == -ENODEV)
+ return -EPROBE_DEFER;
+ return PTR_ERR(axp20x_batt->batt_dischrg_i);
+ }
+
+ axp20x_batt->regmap = dev_get_regmap(pdev->dev.parent, NULL);
+ platform_set_drvdata(pdev, axp20x_batt);
+
+ psy_cfg.drv_data = axp20x_batt;
+ psy_cfg.of_node = pdev->dev.of_node;
+
+ axp20x_batt->data = (struct axp_data *)of_device_get_match_data(dev);
+
+ axp20x_batt->batt = devm_power_supply_register(&pdev->dev,
+ &axp20x_batt_ps_desc,
+ &psy_cfg);
+ if (IS_ERR(axp20x_batt->batt)) {
+ dev_err(&pdev->dev, "failed to register power supply: %ld\n",
+ PTR_ERR(axp20x_batt->batt));
+ return PTR_ERR(axp20x_batt->batt);
+ }
+
+ if (!power_supply_get_battery_info(axp20x_batt->batt, &info)) {
+ int vmin = info.voltage_min_design_uv;
+ int ccc = info.constant_charge_current_max_ua;
+
+ if (vmin > 0 && axp20x_set_voltage_min_design(axp20x_batt,
+ vmin))
+ dev_err(&pdev->dev,
+ "couldn't set voltage_min_design\n");
+
+ /* Set max to unverified value to be able to set CCC */
+ axp20x_batt->max_ccc = ccc;
+
+ if (ccc <= 0 || axp20x_set_constant_charge_current(axp20x_batt,
+ ccc)) {
+ dev_err(&pdev->dev,
+ "couldn't set constant charge current from DT: fallback to minimum value\n");
+ ccc = 300000;
+ axp20x_batt->max_ccc = ccc;
+ axp20x_set_constant_charge_current(axp20x_batt, ccc);
+ }
+ }
+
+ /*
+ * Update max CCC to a valid value if battery info is present or set it
+ * to current register value by default.
+ */
+ axp20x_get_constant_charge_current(axp20x_batt,
+ &axp20x_batt->max_ccc);
+
+ return 0;
+}
+
+static struct platform_driver axp20x_batt_driver = {
+ .probe = axp20x_power_probe,
+ .driver = {
+ .name = "axp20x-battery-power-supply",
+ .of_match_table = axp20x_battery_ps_id,
+ },
+};
+
+module_platform_driver(axp20x_batt_driver);
+
+MODULE_DESCRIPTION("Battery power supply driver for AXP20X and AXP22X PMICs");
+MODULE_AUTHOR("Quentin Schulz <quentin.schulz@free-electrons.com>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/power/supply/axp20x_usb_power.c b/drivers/power/supply/axp20x_usb_power.c
new file mode 100644
index 000000000..25e288388
--- /dev/null
+++ b/drivers/power/supply/axp20x_usb_power.c
@@ -0,0 +1,695 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * AXP20x PMIC USB power supply status driver
+ *
+ * Copyright (C) 2015 Hans de Goede <hdegoede@redhat.com>
+ * Copyright (C) 2014 Bruno Prémont <bonbons@linux-vserver.org>
+ */
+
+#include <linux/bitops.h>
+#include <linux/device.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/mfd/axp20x.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/pm.h>
+#include <linux/power_supply.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+#include <linux/iio/consumer.h>
+#include <linux/workqueue.h>
+
+#define DRVNAME "axp20x-usb-power-supply"
+
+#define AXP20X_PWR_STATUS_VBUS_PRESENT BIT(5)
+#define AXP20X_PWR_STATUS_VBUS_USED BIT(4)
+
+#define AXP20X_USB_STATUS_VBUS_VALID BIT(2)
+
+#define AXP20X_VBUS_PATH_SEL BIT(7)
+#define AXP20X_VBUS_PATH_SEL_OFFSET 7
+
+#define AXP20X_VBUS_VHOLD_uV(b) (4000000 + (((b) >> 3) & 7) * 100000)
+#define AXP20X_VBUS_VHOLD_MASK GENMASK(5, 3)
+#define AXP20X_VBUS_VHOLD_OFFSET 3
+#define AXP20X_VBUS_CLIMIT_MASK 3
+#define AXP20X_VBUS_CLIMIT_900mA 0
+#define AXP20X_VBUS_CLIMIT_500mA 1
+#define AXP20X_VBUS_CLIMIT_100mA 2
+#define AXP20X_VBUS_CLIMIT_NONE 3
+
+#define AXP813_VBUS_CLIMIT_900mA 0
+#define AXP813_VBUS_CLIMIT_1500mA 1
+#define AXP813_VBUS_CLIMIT_2000mA 2
+#define AXP813_VBUS_CLIMIT_2500mA 3
+
+#define AXP20X_ADC_EN1_VBUS_CURR BIT(2)
+#define AXP20X_ADC_EN1_VBUS_VOLT BIT(3)
+
+#define AXP20X_VBUS_MON_VBUS_VALID BIT(3)
+
+#define AXP813_BC_EN BIT(0)
+
+/*
+ * Note do not raise the debounce time, we must report Vusb high within
+ * 100ms otherwise we get Vbus errors in musb.
+ */
+#define DEBOUNCE_TIME msecs_to_jiffies(50)
+
+struct axp20x_usb_power {
+ struct regmap *regmap;
+ struct power_supply *supply;
+ enum axp20x_variants axp20x_id;
+ struct iio_channel *vbus_v;
+ struct iio_channel *vbus_i;
+ struct delayed_work vbus_detect;
+ unsigned int old_status;
+ unsigned int online;
+ unsigned int num_irqs;
+ unsigned int irqs[];
+};
+
+static bool axp20x_usb_vbus_needs_polling(struct axp20x_usb_power *power)
+{
+ /*
+ * Polling is only necessary while VBUS is offline. While online, a
+ * present->absent transition implies an online->offline transition
+ * and will trigger the VBUS_REMOVAL IRQ.
+ */
+ if (power->axp20x_id >= AXP221_ID && !power->online)
+ return true;
+
+ return false;
+}
+
+static irqreturn_t axp20x_usb_power_irq(int irq, void *devid)
+{
+ struct axp20x_usb_power *power = devid;
+
+ power_supply_changed(power->supply);
+
+ mod_delayed_work(system_wq, &power->vbus_detect, DEBOUNCE_TIME);
+
+ return IRQ_HANDLED;
+}
+
+static void axp20x_usb_power_poll_vbus(struct work_struct *work)
+{
+ struct axp20x_usb_power *power =
+ container_of(work, struct axp20x_usb_power, vbus_detect.work);
+ unsigned int val;
+ int ret;
+
+ ret = regmap_read(power->regmap, AXP20X_PWR_INPUT_STATUS, &val);
+ if (ret)
+ goto out;
+
+ val &= (AXP20X_PWR_STATUS_VBUS_PRESENT | AXP20X_PWR_STATUS_VBUS_USED);
+ if (val != power->old_status)
+ power_supply_changed(power->supply);
+
+ power->old_status = val;
+ power->online = val & AXP20X_PWR_STATUS_VBUS_USED;
+
+out:
+ if (axp20x_usb_vbus_needs_polling(power))
+ mod_delayed_work(system_wq, &power->vbus_detect, DEBOUNCE_TIME);
+}
+
+static int axp20x_get_current_max(struct axp20x_usb_power *power, int *val)
+{
+ unsigned int v;
+ int ret = regmap_read(power->regmap, AXP20X_VBUS_IPSOUT_MGMT, &v);
+
+ if (ret)
+ return ret;
+
+ switch (v & AXP20X_VBUS_CLIMIT_MASK) {
+ case AXP20X_VBUS_CLIMIT_100mA:
+ if (power->axp20x_id == AXP221_ID)
+ *val = -1; /* No 100mA limit */
+ else
+ *val = 100000;
+ break;
+ case AXP20X_VBUS_CLIMIT_500mA:
+ *val = 500000;
+ break;
+ case AXP20X_VBUS_CLIMIT_900mA:
+ *val = 900000;
+ break;
+ case AXP20X_VBUS_CLIMIT_NONE:
+ *val = -1;
+ break;
+ }
+
+ return 0;
+}
+
+static int axp813_get_current_max(struct axp20x_usb_power *power, int *val)
+{
+ unsigned int v;
+ int ret = regmap_read(power->regmap, AXP20X_VBUS_IPSOUT_MGMT, &v);
+
+ if (ret)
+ return ret;
+
+ switch (v & AXP20X_VBUS_CLIMIT_MASK) {
+ case AXP813_VBUS_CLIMIT_900mA:
+ *val = 900000;
+ break;
+ case AXP813_VBUS_CLIMIT_1500mA:
+ *val = 1500000;
+ break;
+ case AXP813_VBUS_CLIMIT_2000mA:
+ *val = 2000000;
+ break;
+ case AXP813_VBUS_CLIMIT_2500mA:
+ *val = 2500000;
+ break;
+ }
+ return 0;
+}
+
+static int axp20x_usb_power_get_property(struct power_supply *psy,
+ enum power_supply_property psp, union power_supply_propval *val)
+{
+ struct axp20x_usb_power *power = power_supply_get_drvdata(psy);
+ unsigned int input, v;
+ int ret;
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_VOLTAGE_MIN:
+ ret = regmap_read(power->regmap, AXP20X_VBUS_IPSOUT_MGMT, &v);
+ if (ret)
+ return ret;
+
+ val->intval = AXP20X_VBUS_VHOLD_uV(v);
+ return 0;
+ case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+ if (IS_ENABLED(CONFIG_AXP20X_ADC)) {
+ ret = iio_read_channel_processed(power->vbus_v,
+ &val->intval);
+ if (ret)
+ return ret;
+
+ /*
+ * IIO framework gives mV but Power Supply framework
+ * gives uV.
+ */
+ val->intval *= 1000;
+ return 0;
+ }
+
+ ret = axp20x_read_variable_width(power->regmap,
+ AXP20X_VBUS_V_ADC_H, 12);
+ if (ret < 0)
+ return ret;
+
+ val->intval = ret * 1700; /* 1 step = 1.7 mV */
+ return 0;
+ case POWER_SUPPLY_PROP_CURRENT_MAX:
+ if (power->axp20x_id == AXP813_ID)
+ return axp813_get_current_max(power, &val->intval);
+ return axp20x_get_current_max(power, &val->intval);
+ case POWER_SUPPLY_PROP_CURRENT_NOW:
+ if (IS_ENABLED(CONFIG_AXP20X_ADC)) {
+ ret = iio_read_channel_processed(power->vbus_i,
+ &val->intval);
+ if (ret)
+ return ret;
+
+ /*
+ * IIO framework gives mA but Power Supply framework
+ * gives uA.
+ */
+ val->intval *= 1000;
+ return 0;
+ }
+
+ ret = axp20x_read_variable_width(power->regmap,
+ AXP20X_VBUS_I_ADC_H, 12);
+ if (ret < 0)
+ return ret;
+
+ val->intval = ret * 375; /* 1 step = 0.375 mA */
+ return 0;
+ default:
+ break;
+ }
+
+ /* All the properties below need the input-status reg value */
+ ret = regmap_read(power->regmap, AXP20X_PWR_INPUT_STATUS, &input);
+ if (ret)
+ return ret;
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_HEALTH:
+ if (!(input & AXP20X_PWR_STATUS_VBUS_PRESENT)) {
+ val->intval = POWER_SUPPLY_HEALTH_UNKNOWN;
+ break;
+ }
+
+ val->intval = POWER_SUPPLY_HEALTH_GOOD;
+
+ if (power->axp20x_id == AXP202_ID) {
+ ret = regmap_read(power->regmap,
+ AXP20X_USB_OTG_STATUS, &v);
+ if (ret)
+ return ret;
+
+ if (!(v & AXP20X_USB_STATUS_VBUS_VALID))
+ val->intval =
+ POWER_SUPPLY_HEALTH_UNSPEC_FAILURE;
+ }
+ break;
+ case POWER_SUPPLY_PROP_PRESENT:
+ val->intval = !!(input & AXP20X_PWR_STATUS_VBUS_PRESENT);
+ break;
+ case POWER_SUPPLY_PROP_ONLINE:
+ val->intval = !!(input & AXP20X_PWR_STATUS_VBUS_USED);
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int axp813_usb_power_set_online(struct axp20x_usb_power *power,
+ int intval)
+{
+ int val = !intval << AXP20X_VBUS_PATH_SEL_OFFSET;
+
+ return regmap_update_bits(power->regmap,
+ AXP20X_VBUS_IPSOUT_MGMT,
+ AXP20X_VBUS_PATH_SEL, val);
+}
+
+static int axp20x_usb_power_set_voltage_min(struct axp20x_usb_power *power,
+ int intval)
+{
+ int val;
+
+ switch (intval) {
+ case 4000000:
+ case 4100000:
+ case 4200000:
+ case 4300000:
+ case 4400000:
+ case 4500000:
+ case 4600000:
+ case 4700000:
+ val = (intval - 4000000) / 100000;
+ return regmap_update_bits(power->regmap,
+ AXP20X_VBUS_IPSOUT_MGMT,
+ AXP20X_VBUS_VHOLD_MASK,
+ val << AXP20X_VBUS_VHOLD_OFFSET);
+ default:
+ return -EINVAL;
+ }
+
+ return -EINVAL;
+}
+
+static int axp813_usb_power_set_current_max(struct axp20x_usb_power *power,
+ int intval)
+{
+ int val;
+
+ switch (intval) {
+ case 900000:
+ return regmap_update_bits(power->regmap,
+ AXP20X_VBUS_IPSOUT_MGMT,
+ AXP20X_VBUS_CLIMIT_MASK,
+ AXP813_VBUS_CLIMIT_900mA);
+ case 1500000:
+ case 2000000:
+ case 2500000:
+ val = (intval - 1000000) / 500000;
+ return regmap_update_bits(power->regmap,
+ AXP20X_VBUS_IPSOUT_MGMT,
+ AXP20X_VBUS_CLIMIT_MASK, val);
+ default:
+ return -EINVAL;
+ }
+
+ return -EINVAL;
+}
+
+static int axp20x_usb_power_set_current_max(struct axp20x_usb_power *power,
+ int intval)
+{
+ int val;
+
+ switch (intval) {
+ case 100000:
+ if (power->axp20x_id == AXP221_ID)
+ return -EINVAL;
+ fallthrough;
+ case 500000:
+ case 900000:
+ val = (900000 - intval) / 400000;
+ return regmap_update_bits(power->regmap,
+ AXP20X_VBUS_IPSOUT_MGMT,
+ AXP20X_VBUS_CLIMIT_MASK, val);
+ default:
+ return -EINVAL;
+ }
+
+ return -EINVAL;
+}
+
+static int axp20x_usb_power_set_property(struct power_supply *psy,
+ enum power_supply_property psp,
+ const union power_supply_propval *val)
+{
+ struct axp20x_usb_power *power = power_supply_get_drvdata(psy);
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_ONLINE:
+ if (power->axp20x_id != AXP813_ID)
+ return -EINVAL;
+ return axp813_usb_power_set_online(power, val->intval);
+
+ case POWER_SUPPLY_PROP_VOLTAGE_MIN:
+ return axp20x_usb_power_set_voltage_min(power, val->intval);
+
+ case POWER_SUPPLY_PROP_CURRENT_MAX:
+ if (power->axp20x_id == AXP813_ID)
+ return axp813_usb_power_set_current_max(power,
+ val->intval);
+ return axp20x_usb_power_set_current_max(power, val->intval);
+
+ default:
+ return -EINVAL;
+ }
+
+ return -EINVAL;
+}
+
+static int axp20x_usb_power_prop_writeable(struct power_supply *psy,
+ enum power_supply_property psp)
+{
+ struct axp20x_usb_power *power = power_supply_get_drvdata(psy);
+
+ /*
+ * The VBUS path select flag works differently on on AXP288 and newer:
+ * - On AXP20x and AXP22x, the flag enables VBUS (ignoring N_VBUSEN).
+ * - On AXP288 and AXP8xx, the flag disables VBUS (ignoring N_VBUSEN).
+ * We only expose the control on variants where it can be used to force
+ * the VBUS input offline.
+ */
+ if (psp == POWER_SUPPLY_PROP_ONLINE)
+ return power->axp20x_id == AXP813_ID;
+
+ return psp == POWER_SUPPLY_PROP_VOLTAGE_MIN ||
+ psp == POWER_SUPPLY_PROP_CURRENT_MAX;
+}
+
+static enum power_supply_property axp20x_usb_power_properties[] = {
+ POWER_SUPPLY_PROP_HEALTH,
+ POWER_SUPPLY_PROP_PRESENT,
+ POWER_SUPPLY_PROP_ONLINE,
+ POWER_SUPPLY_PROP_VOLTAGE_MIN,
+ POWER_SUPPLY_PROP_VOLTAGE_NOW,
+ POWER_SUPPLY_PROP_CURRENT_MAX,
+ POWER_SUPPLY_PROP_CURRENT_NOW,
+};
+
+static enum power_supply_property axp22x_usb_power_properties[] = {
+ POWER_SUPPLY_PROP_HEALTH,
+ POWER_SUPPLY_PROP_PRESENT,
+ POWER_SUPPLY_PROP_ONLINE,
+ POWER_SUPPLY_PROP_VOLTAGE_MIN,
+ POWER_SUPPLY_PROP_CURRENT_MAX,
+};
+
+static const struct power_supply_desc axp20x_usb_power_desc = {
+ .name = "axp20x-usb",
+ .type = POWER_SUPPLY_TYPE_USB,
+ .properties = axp20x_usb_power_properties,
+ .num_properties = ARRAY_SIZE(axp20x_usb_power_properties),
+ .property_is_writeable = axp20x_usb_power_prop_writeable,
+ .get_property = axp20x_usb_power_get_property,
+ .set_property = axp20x_usb_power_set_property,
+};
+
+static const struct power_supply_desc axp22x_usb_power_desc = {
+ .name = "axp20x-usb",
+ .type = POWER_SUPPLY_TYPE_USB,
+ .properties = axp22x_usb_power_properties,
+ .num_properties = ARRAY_SIZE(axp22x_usb_power_properties),
+ .property_is_writeable = axp20x_usb_power_prop_writeable,
+ .get_property = axp20x_usb_power_get_property,
+ .set_property = axp20x_usb_power_set_property,
+};
+
+static const char * const axp20x_irq_names[] = {
+ "VBUS_PLUGIN",
+ "VBUS_REMOVAL",
+ "VBUS_VALID",
+ "VBUS_NOT_VALID",
+};
+
+static const char * const axp22x_irq_names[] = {
+ "VBUS_PLUGIN",
+ "VBUS_REMOVAL",
+};
+
+struct axp_data {
+ const struct power_supply_desc *power_desc;
+ const char * const *irq_names;
+ unsigned int num_irq_names;
+ enum axp20x_variants axp20x_id;
+};
+
+static const struct axp_data axp202_data = {
+ .power_desc = &axp20x_usb_power_desc,
+ .irq_names = axp20x_irq_names,
+ .num_irq_names = ARRAY_SIZE(axp20x_irq_names),
+ .axp20x_id = AXP202_ID,
+};
+
+static const struct axp_data axp221_data = {
+ .power_desc = &axp22x_usb_power_desc,
+ .irq_names = axp22x_irq_names,
+ .num_irq_names = ARRAY_SIZE(axp22x_irq_names),
+ .axp20x_id = AXP221_ID,
+};
+
+static const struct axp_data axp223_data = {
+ .power_desc = &axp22x_usb_power_desc,
+ .irq_names = axp22x_irq_names,
+ .num_irq_names = ARRAY_SIZE(axp22x_irq_names),
+ .axp20x_id = AXP223_ID,
+};
+
+static const struct axp_data axp813_data = {
+ .power_desc = &axp22x_usb_power_desc,
+ .irq_names = axp22x_irq_names,
+ .num_irq_names = ARRAY_SIZE(axp22x_irq_names),
+ .axp20x_id = AXP813_ID,
+};
+
+#ifdef CONFIG_PM_SLEEP
+static int axp20x_usb_power_suspend(struct device *dev)
+{
+ struct axp20x_usb_power *power = dev_get_drvdata(dev);
+ int i = 0;
+
+ /*
+ * Allow wake via VBUS_PLUGIN only.
+ *
+ * As nested threaded IRQs are not automatically disabled during
+ * suspend, we must explicitly disable the remainder of the IRQs.
+ */
+ if (device_may_wakeup(&power->supply->dev))
+ enable_irq_wake(power->irqs[i++]);
+ while (i < power->num_irqs)
+ disable_irq(power->irqs[i++]);
+
+ return 0;
+}
+
+static int axp20x_usb_power_resume(struct device *dev)
+{
+ struct axp20x_usb_power *power = dev_get_drvdata(dev);
+ int i = 0;
+
+ if (device_may_wakeup(&power->supply->dev))
+ disable_irq_wake(power->irqs[i++]);
+ while (i < power->num_irqs)
+ enable_irq(power->irqs[i++]);
+
+ mod_delayed_work(system_wq, &power->vbus_detect, DEBOUNCE_TIME);
+
+ return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(axp20x_usb_power_pm_ops, axp20x_usb_power_suspend,
+ axp20x_usb_power_resume);
+
+static int configure_iio_channels(struct platform_device *pdev,
+ struct axp20x_usb_power *power)
+{
+ power->vbus_v = devm_iio_channel_get(&pdev->dev, "vbus_v");
+ if (IS_ERR(power->vbus_v)) {
+ if (PTR_ERR(power->vbus_v) == -ENODEV)
+ return -EPROBE_DEFER;
+ return PTR_ERR(power->vbus_v);
+ }
+
+ power->vbus_i = devm_iio_channel_get(&pdev->dev, "vbus_i");
+ if (IS_ERR(power->vbus_i)) {
+ if (PTR_ERR(power->vbus_i) == -ENODEV)
+ return -EPROBE_DEFER;
+ return PTR_ERR(power->vbus_i);
+ }
+
+ return 0;
+}
+
+static int configure_adc_registers(struct axp20x_usb_power *power)
+{
+ /* Enable vbus voltage and current measurement */
+ return regmap_update_bits(power->regmap, AXP20X_ADC_EN1,
+ AXP20X_ADC_EN1_VBUS_CURR |
+ AXP20X_ADC_EN1_VBUS_VOLT,
+ AXP20X_ADC_EN1_VBUS_CURR |
+ AXP20X_ADC_EN1_VBUS_VOLT);
+}
+
+static int axp20x_usb_power_probe(struct platform_device *pdev)
+{
+ struct axp20x_dev *axp20x = dev_get_drvdata(pdev->dev.parent);
+ struct power_supply_config psy_cfg = {};
+ struct axp20x_usb_power *power;
+ const struct axp_data *axp_data;
+ int i, irq, ret;
+
+ if (!of_device_is_available(pdev->dev.of_node))
+ return -ENODEV;
+
+ if (!axp20x) {
+ dev_err(&pdev->dev, "Parent drvdata not set\n");
+ return -EINVAL;
+ }
+
+ axp_data = of_device_get_match_data(&pdev->dev);
+
+ power = devm_kzalloc(&pdev->dev,
+ struct_size(power, irqs, axp_data->num_irq_names),
+ GFP_KERNEL);
+ if (!power)
+ return -ENOMEM;
+
+ platform_set_drvdata(pdev, power);
+
+ power->axp20x_id = axp_data->axp20x_id;
+ power->regmap = axp20x->regmap;
+ power->num_irqs = axp_data->num_irq_names;
+ INIT_DELAYED_WORK(&power->vbus_detect, axp20x_usb_power_poll_vbus);
+
+ if (power->axp20x_id == AXP202_ID) {
+ /* Enable vbus valid checking */
+ ret = regmap_update_bits(power->regmap, AXP20X_VBUS_MON,
+ AXP20X_VBUS_MON_VBUS_VALID,
+ AXP20X_VBUS_MON_VBUS_VALID);
+ if (ret)
+ return ret;
+
+ if (IS_ENABLED(CONFIG_AXP20X_ADC))
+ ret = configure_iio_channels(pdev, power);
+ else
+ ret = configure_adc_registers(power);
+
+ if (ret)
+ return ret;
+ }
+
+ if (power->axp20x_id == AXP813_ID) {
+ /* Enable USB Battery Charging specification detection */
+ regmap_update_bits(axp20x->regmap, AXP288_BC_GLOBAL,
+ AXP813_BC_EN, AXP813_BC_EN);
+ }
+
+ psy_cfg.of_node = pdev->dev.of_node;
+ psy_cfg.drv_data = power;
+
+ power->supply = devm_power_supply_register(&pdev->dev,
+ axp_data->power_desc,
+ &psy_cfg);
+ if (IS_ERR(power->supply))
+ return PTR_ERR(power->supply);
+
+ /* Request irqs after registering, as irqs may trigger immediately */
+ for (i = 0; i < axp_data->num_irq_names; i++) {
+ irq = platform_get_irq_byname(pdev, axp_data->irq_names[i]);
+ if (irq < 0) {
+ dev_err(&pdev->dev, "No IRQ for %s: %d\n",
+ axp_data->irq_names[i], irq);
+ return irq;
+ }
+ power->irqs[i] = regmap_irq_get_virq(axp20x->regmap_irqc, irq);
+ ret = devm_request_any_context_irq(&pdev->dev, power->irqs[i],
+ axp20x_usb_power_irq, 0,
+ DRVNAME, power);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "Error requesting %s IRQ: %d\n",
+ axp_data->irq_names[i], ret);
+ return ret;
+ }
+ }
+
+ if (axp20x_usb_vbus_needs_polling(power))
+ queue_delayed_work(system_wq, &power->vbus_detect, 0);
+
+ return 0;
+}
+
+static int axp20x_usb_power_remove(struct platform_device *pdev)
+{
+ struct axp20x_usb_power *power = platform_get_drvdata(pdev);
+
+ cancel_delayed_work_sync(&power->vbus_detect);
+
+ return 0;
+}
+
+static const struct of_device_id axp20x_usb_power_match[] = {
+ {
+ .compatible = "x-powers,axp202-usb-power-supply",
+ .data = &axp202_data,
+ }, {
+ .compatible = "x-powers,axp221-usb-power-supply",
+ .data = &axp221_data,
+ }, {
+ .compatible = "x-powers,axp223-usb-power-supply",
+ .data = &axp223_data,
+ }, {
+ .compatible = "x-powers,axp813-usb-power-supply",
+ .data = &axp813_data,
+ }, { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, axp20x_usb_power_match);
+
+static struct platform_driver axp20x_usb_power_driver = {
+ .probe = axp20x_usb_power_probe,
+ .remove = axp20x_usb_power_remove,
+ .driver = {
+ .name = DRVNAME,
+ .of_match_table = axp20x_usb_power_match,
+ .pm = &axp20x_usb_power_pm_ops,
+ },
+};
+
+module_platform_driver(axp20x_usb_power_driver);
+
+MODULE_AUTHOR("Hans de Goede <hdegoede@redhat.com>");
+MODULE_DESCRIPTION("AXP20x PMIC USB power supply status driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/power/supply/axp288_charger.c b/drivers/power/supply/axp288_charger.c
new file mode 100644
index 000000000..f65bf7b29
--- /dev/null
+++ b/drivers/power/supply/axp288_charger.c
@@ -0,0 +1,939 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * axp288_charger.c - X-power AXP288 PMIC Charger driver
+ *
+ * Copyright (C) 2016-2017 Hans de Goede <hdegoede@redhat.com>
+ * Copyright (C) 2014 Intel Corporation
+ * Author: Ramakrishna Pallala <ramakrishna.pallala@intel.com>
+ */
+
+#include <linux/acpi.h>
+#include <linux/bitops.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/regmap.h>
+#include <linux/workqueue.h>
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+#include <linux/usb/otg.h>
+#include <linux/notifier.h>
+#include <linux/power_supply.h>
+#include <linux/property.h>
+#include <linux/mfd/axp20x.h>
+#include <linux/extcon.h>
+#include <linux/dmi.h>
+
+#define PS_STAT_VBUS_TRIGGER BIT(0)
+#define PS_STAT_BAT_CHRG_DIR BIT(2)
+#define PS_STAT_VBAT_ABOVE_VHOLD BIT(3)
+#define PS_STAT_VBUS_VALID BIT(4)
+#define PS_STAT_VBUS_PRESENT BIT(5)
+
+#define CHRG_STAT_BAT_SAFE_MODE BIT(3)
+#define CHRG_STAT_BAT_VALID BIT(4)
+#define CHRG_STAT_BAT_PRESENT BIT(5)
+#define CHRG_STAT_CHARGING BIT(6)
+#define CHRG_STAT_PMIC_OTP BIT(7)
+
+#define VBUS_ISPOUT_CUR_LIM_MASK 0x03
+#define VBUS_ISPOUT_CUR_LIM_BIT_POS 0
+#define VBUS_ISPOUT_CUR_LIM_900MA 0x0 /* 900mA */
+#define VBUS_ISPOUT_CUR_LIM_1500MA 0x1 /* 1500mA */
+#define VBUS_ISPOUT_CUR_LIM_2000MA 0x2 /* 2000mA */
+#define VBUS_ISPOUT_CUR_NO_LIM 0x3 /* 2500mA */
+#define VBUS_ISPOUT_VHOLD_SET_MASK 0x38
+#define VBUS_ISPOUT_VHOLD_SET_BIT_POS 0x3
+#define VBUS_ISPOUT_VHOLD_SET_OFFSET 4000 /* 4000mV */
+#define VBUS_ISPOUT_VHOLD_SET_LSB_RES 100 /* 100mV */
+#define VBUS_ISPOUT_VHOLD_SET_4400MV 0x4 /* 4400mV */
+#define VBUS_ISPOUT_VBUS_PATH_DIS BIT(7)
+
+#define CHRG_CCCV_CC_MASK 0xf /* 4 bits */
+#define CHRG_CCCV_CC_BIT_POS 0
+#define CHRG_CCCV_CC_OFFSET 200 /* 200mA */
+#define CHRG_CCCV_CC_LSB_RES 200 /* 200mA */
+#define CHRG_CCCV_ITERM_20P BIT(4) /* 20% of CC */
+#define CHRG_CCCV_CV_MASK 0x60 /* 2 bits */
+#define CHRG_CCCV_CV_BIT_POS 5
+#define CHRG_CCCV_CV_4100MV 0x0 /* 4.10V */
+#define CHRG_CCCV_CV_4150MV 0x1 /* 4.15V */
+#define CHRG_CCCV_CV_4200MV 0x2 /* 4.20V */
+#define CHRG_CCCV_CV_4350MV 0x3 /* 4.35V */
+#define CHRG_CCCV_CHG_EN BIT(7)
+
+#define CNTL2_CC_TIMEOUT_MASK 0x3 /* 2 bits */
+#define CNTL2_CC_TIMEOUT_OFFSET 6 /* 6 Hrs */
+#define CNTL2_CC_TIMEOUT_LSB_RES 2 /* 2 Hrs */
+#define CNTL2_CC_TIMEOUT_12HRS 0x3 /* 12 Hrs */
+#define CNTL2_CHGLED_TYPEB BIT(4)
+#define CNTL2_CHG_OUT_TURNON BIT(5)
+#define CNTL2_PC_TIMEOUT_MASK 0xC0
+#define CNTL2_PC_TIMEOUT_OFFSET 40 /* 40 mins */
+#define CNTL2_PC_TIMEOUT_LSB_RES 10 /* 10 mins */
+#define CNTL2_PC_TIMEOUT_70MINS 0x3
+
+#define CHRG_ILIM_TEMP_LOOP_EN BIT(3)
+#define CHRG_VBUS_ILIM_MASK 0xf0
+#define CHRG_VBUS_ILIM_BIT_POS 4
+#define CHRG_VBUS_ILIM_100MA 0x0 /* 100mA */
+#define CHRG_VBUS_ILIM_500MA 0x1 /* 500mA */
+#define CHRG_VBUS_ILIM_900MA 0x2 /* 900mA */
+#define CHRG_VBUS_ILIM_1500MA 0x3 /* 1500mA */
+#define CHRG_VBUS_ILIM_2000MA 0x4 /* 2000mA */
+#define CHRG_VBUS_ILIM_2500MA 0x5 /* 2500mA */
+#define CHRG_VBUS_ILIM_3000MA 0x6 /* 3000mA */
+#define CHRG_VBUS_ILIM_3500MA 0x7 /* 3500mA */
+#define CHRG_VBUS_ILIM_4000MA 0x8 /* 4000mA */
+
+#define CHRG_VLTFC_0C 0xA5 /* 0 DegC */
+#define CHRG_VHTFC_45C 0x1F /* 45 DegC */
+
+#define FG_CNTL_OCV_ADJ_EN BIT(3)
+
+#define CV_4100MV 4100 /* 4100mV */
+#define CV_4150MV 4150 /* 4150mV */
+#define CV_4200MV 4200 /* 4200mV */
+#define CV_4350MV 4350 /* 4350mV */
+
+#define AXP288_EXTCON_DEV_NAME "axp288_extcon"
+#define USB_HOST_EXTCON_HID "INT3496"
+#define USB_HOST_EXTCON_NAME "INT3496:00"
+
+enum {
+ VBUS_OV_IRQ = 0,
+ CHARGE_DONE_IRQ,
+ CHARGE_CHARGING_IRQ,
+ BAT_SAFE_QUIT_IRQ,
+ BAT_SAFE_ENTER_IRQ,
+ QCBTU_IRQ,
+ CBTU_IRQ,
+ QCBTO_IRQ,
+ CBTO_IRQ,
+ CHRG_INTR_END,
+};
+
+struct axp288_chrg_info {
+ struct platform_device *pdev;
+ struct regmap *regmap;
+ struct regmap_irq_chip_data *regmap_irqc;
+ int irq[CHRG_INTR_END];
+ struct power_supply *psy_usb;
+
+ /* OTG/Host mode */
+ struct {
+ struct work_struct work;
+ struct extcon_dev *cable;
+ struct notifier_block id_nb;
+ bool id_short;
+ } otg;
+
+ /* SDP/CDP/DCP USB charging cable notifications */
+ struct {
+ struct extcon_dev *edev;
+ struct notifier_block nb;
+ struct work_struct work;
+ } cable;
+
+ int cc;
+ int cv;
+ int max_cc;
+ int max_cv;
+};
+
+static inline int axp288_charger_set_cc(struct axp288_chrg_info *info, int cc)
+{
+ u8 reg_val;
+ int ret;
+
+ if (cc < CHRG_CCCV_CC_OFFSET)
+ cc = CHRG_CCCV_CC_OFFSET;
+ else if (cc > info->max_cc)
+ cc = info->max_cc;
+
+ reg_val = (cc - CHRG_CCCV_CC_OFFSET) / CHRG_CCCV_CC_LSB_RES;
+ cc = (reg_val * CHRG_CCCV_CC_LSB_RES) + CHRG_CCCV_CC_OFFSET;
+ reg_val = reg_val << CHRG_CCCV_CC_BIT_POS;
+
+ ret = regmap_update_bits(info->regmap,
+ AXP20X_CHRG_CTRL1,
+ CHRG_CCCV_CC_MASK, reg_val);
+ if (ret >= 0)
+ info->cc = cc;
+
+ return ret;
+}
+
+static inline int axp288_charger_set_cv(struct axp288_chrg_info *info, int cv)
+{
+ u8 reg_val;
+ int ret;
+
+ if (cv <= CV_4100MV) {
+ reg_val = CHRG_CCCV_CV_4100MV;
+ cv = CV_4100MV;
+ } else if (cv <= CV_4150MV) {
+ reg_val = CHRG_CCCV_CV_4150MV;
+ cv = CV_4150MV;
+ } else if (cv <= CV_4200MV) {
+ reg_val = CHRG_CCCV_CV_4200MV;
+ cv = CV_4200MV;
+ } else {
+ reg_val = CHRG_CCCV_CV_4350MV;
+ cv = CV_4350MV;
+ }
+
+ reg_val = reg_val << CHRG_CCCV_CV_BIT_POS;
+
+ ret = regmap_update_bits(info->regmap,
+ AXP20X_CHRG_CTRL1,
+ CHRG_CCCV_CV_MASK, reg_val);
+
+ if (ret >= 0)
+ info->cv = cv;
+
+ return ret;
+}
+
+static int axp288_charger_get_vbus_inlmt(struct axp288_chrg_info *info)
+{
+ unsigned int val;
+ int ret;
+
+ ret = regmap_read(info->regmap, AXP20X_CHRG_BAK_CTRL, &val);
+ if (ret < 0)
+ return ret;
+
+ val >>= CHRG_VBUS_ILIM_BIT_POS;
+ switch (val) {
+ case CHRG_VBUS_ILIM_100MA:
+ return 100000;
+ case CHRG_VBUS_ILIM_500MA:
+ return 500000;
+ case CHRG_VBUS_ILIM_900MA:
+ return 900000;
+ case CHRG_VBUS_ILIM_1500MA:
+ return 1500000;
+ case CHRG_VBUS_ILIM_2000MA:
+ return 2000000;
+ case CHRG_VBUS_ILIM_2500MA:
+ return 2500000;
+ case CHRG_VBUS_ILIM_3000MA:
+ return 3000000;
+ case CHRG_VBUS_ILIM_3500MA:
+ return 3500000;
+ default:
+ /* All b1xxx values map to 4000 mA */
+ return 4000000;
+ }
+}
+
+static inline int axp288_charger_set_vbus_inlmt(struct axp288_chrg_info *info,
+ int inlmt)
+{
+ int ret;
+ u8 reg_val;
+
+ if (inlmt >= 4000000)
+ reg_val = CHRG_VBUS_ILIM_4000MA << CHRG_VBUS_ILIM_BIT_POS;
+ else if (inlmt >= 3500000)
+ reg_val = CHRG_VBUS_ILIM_3500MA << CHRG_VBUS_ILIM_BIT_POS;
+ else if (inlmt >= 3000000)
+ reg_val = CHRG_VBUS_ILIM_3000MA << CHRG_VBUS_ILIM_BIT_POS;
+ else if (inlmt >= 2500000)
+ reg_val = CHRG_VBUS_ILIM_2500MA << CHRG_VBUS_ILIM_BIT_POS;
+ else if (inlmt >= 2000000)
+ reg_val = CHRG_VBUS_ILIM_2000MA << CHRG_VBUS_ILIM_BIT_POS;
+ else if (inlmt >= 1500000)
+ reg_val = CHRG_VBUS_ILIM_1500MA << CHRG_VBUS_ILIM_BIT_POS;
+ else if (inlmt >= 900000)
+ reg_val = CHRG_VBUS_ILIM_900MA << CHRG_VBUS_ILIM_BIT_POS;
+ else if (inlmt >= 500000)
+ reg_val = CHRG_VBUS_ILIM_500MA << CHRG_VBUS_ILIM_BIT_POS;
+ else
+ reg_val = CHRG_VBUS_ILIM_100MA << CHRG_VBUS_ILIM_BIT_POS;
+
+ ret = regmap_update_bits(info->regmap, AXP20X_CHRG_BAK_CTRL,
+ CHRG_VBUS_ILIM_MASK, reg_val);
+ if (ret < 0)
+ dev_err(&info->pdev->dev, "charger BAK control %d\n", ret);
+
+ return ret;
+}
+
+static int axp288_charger_vbus_path_select(struct axp288_chrg_info *info,
+ bool enable)
+{
+ int ret;
+
+ if (enable)
+ ret = regmap_update_bits(info->regmap, AXP20X_VBUS_IPSOUT_MGMT,
+ VBUS_ISPOUT_VBUS_PATH_DIS, 0);
+ else
+ ret = regmap_update_bits(info->regmap, AXP20X_VBUS_IPSOUT_MGMT,
+ VBUS_ISPOUT_VBUS_PATH_DIS, VBUS_ISPOUT_VBUS_PATH_DIS);
+
+ if (ret < 0)
+ dev_err(&info->pdev->dev, "axp288 vbus path select %d\n", ret);
+
+ return ret;
+}
+
+static int axp288_charger_enable_charger(struct axp288_chrg_info *info,
+ bool enable)
+{
+ int ret;
+
+ if (enable)
+ ret = regmap_update_bits(info->regmap, AXP20X_CHRG_CTRL1,
+ CHRG_CCCV_CHG_EN, CHRG_CCCV_CHG_EN);
+ else
+ ret = regmap_update_bits(info->regmap, AXP20X_CHRG_CTRL1,
+ CHRG_CCCV_CHG_EN, 0);
+ if (ret < 0)
+ dev_err(&info->pdev->dev, "axp288 enable charger %d\n", ret);
+
+ return ret;
+}
+
+static int axp288_charger_is_present(struct axp288_chrg_info *info)
+{
+ int ret, present = 0;
+ unsigned int val;
+
+ ret = regmap_read(info->regmap, AXP20X_PWR_INPUT_STATUS, &val);
+ if (ret < 0)
+ return ret;
+
+ if (val & PS_STAT_VBUS_PRESENT)
+ present = 1;
+ return present;
+}
+
+static int axp288_charger_is_online(struct axp288_chrg_info *info)
+{
+ int ret, online = 0;
+ unsigned int val;
+
+ ret = regmap_read(info->regmap, AXP20X_PWR_INPUT_STATUS, &val);
+ if (ret < 0)
+ return ret;
+
+ if (val & PS_STAT_VBUS_VALID)
+ online = 1;
+ return online;
+}
+
+static int axp288_get_charger_health(struct axp288_chrg_info *info)
+{
+ int ret, pwr_stat, chrg_stat;
+ int health = POWER_SUPPLY_HEALTH_UNKNOWN;
+ unsigned int val;
+
+ ret = regmap_read(info->regmap, AXP20X_PWR_INPUT_STATUS, &val);
+ if ((ret < 0) || !(val & PS_STAT_VBUS_PRESENT))
+ goto health_read_fail;
+ else
+ pwr_stat = val;
+
+ ret = regmap_read(info->regmap, AXP20X_PWR_OP_MODE, &val);
+ if (ret < 0)
+ goto health_read_fail;
+ else
+ chrg_stat = val;
+
+ if (!(pwr_stat & PS_STAT_VBUS_VALID))
+ health = POWER_SUPPLY_HEALTH_DEAD;
+ else if (chrg_stat & CHRG_STAT_PMIC_OTP)
+ health = POWER_SUPPLY_HEALTH_OVERHEAT;
+ else if (chrg_stat & CHRG_STAT_BAT_SAFE_MODE)
+ health = POWER_SUPPLY_HEALTH_SAFETY_TIMER_EXPIRE;
+ else
+ health = POWER_SUPPLY_HEALTH_GOOD;
+
+health_read_fail:
+ return health;
+}
+
+static int axp288_charger_usb_set_property(struct power_supply *psy,
+ enum power_supply_property psp,
+ const union power_supply_propval *val)
+{
+ struct axp288_chrg_info *info = power_supply_get_drvdata(psy);
+ int ret = 0;
+ int scaled_val;
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT:
+ scaled_val = min(val->intval, info->max_cc);
+ scaled_val = DIV_ROUND_CLOSEST(scaled_val, 1000);
+ ret = axp288_charger_set_cc(info, scaled_val);
+ if (ret < 0)
+ dev_warn(&info->pdev->dev, "set charge current failed\n");
+ break;
+ case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE:
+ scaled_val = min(val->intval, info->max_cv);
+ scaled_val = DIV_ROUND_CLOSEST(scaled_val, 1000);
+ ret = axp288_charger_set_cv(info, scaled_val);
+ if (ret < 0)
+ dev_warn(&info->pdev->dev, "set charge voltage failed\n");
+ break;
+ case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT:
+ ret = axp288_charger_set_vbus_inlmt(info, val->intval);
+ if (ret < 0)
+ dev_warn(&info->pdev->dev, "set input current limit failed\n");
+ break;
+ default:
+ ret = -EINVAL;
+ }
+
+ return ret;
+}
+
+static int axp288_charger_usb_get_property(struct power_supply *psy,
+ enum power_supply_property psp,
+ union power_supply_propval *val)
+{
+ struct axp288_chrg_info *info = power_supply_get_drvdata(psy);
+ int ret;
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_PRESENT:
+ /* Check for OTG case first */
+ if (info->otg.id_short) {
+ val->intval = 0;
+ break;
+ }
+ ret = axp288_charger_is_present(info);
+ if (ret < 0)
+ return ret;
+ val->intval = ret;
+ break;
+ case POWER_SUPPLY_PROP_ONLINE:
+ /* Check for OTG case first */
+ if (info->otg.id_short) {
+ val->intval = 0;
+ break;
+ }
+ ret = axp288_charger_is_online(info);
+ if (ret < 0)
+ return ret;
+ val->intval = ret;
+ break;
+ case POWER_SUPPLY_PROP_HEALTH:
+ val->intval = axp288_get_charger_health(info);
+ break;
+ case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT:
+ val->intval = info->cc * 1000;
+ break;
+ case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX:
+ val->intval = info->max_cc * 1000;
+ break;
+ case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE:
+ val->intval = info->cv * 1000;
+ break;
+ case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX:
+ val->intval = info->max_cv * 1000;
+ break;
+ case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT:
+ ret = axp288_charger_get_vbus_inlmt(info);
+ if (ret < 0)
+ return ret;
+ val->intval = ret;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int axp288_charger_property_is_writeable(struct power_supply *psy,
+ enum power_supply_property psp)
+{
+ int ret;
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT:
+ case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE:
+ case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT:
+ ret = 1;
+ break;
+ default:
+ ret = 0;
+ }
+
+ return ret;
+}
+
+static enum power_supply_property axp288_usb_props[] = {
+ POWER_SUPPLY_PROP_PRESENT,
+ POWER_SUPPLY_PROP_ONLINE,
+ POWER_SUPPLY_PROP_TYPE,
+ POWER_SUPPLY_PROP_HEALTH,
+ POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT,
+ POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX,
+ POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE,
+ POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX,
+ POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT,
+};
+
+static const struct power_supply_desc axp288_charger_desc = {
+ .name = "axp288_charger",
+ .type = POWER_SUPPLY_TYPE_USB,
+ .properties = axp288_usb_props,
+ .num_properties = ARRAY_SIZE(axp288_usb_props),
+ .get_property = axp288_charger_usb_get_property,
+ .set_property = axp288_charger_usb_set_property,
+ .property_is_writeable = axp288_charger_property_is_writeable,
+};
+
+static irqreturn_t axp288_charger_irq_thread_handler(int irq, void *dev)
+{
+ struct axp288_chrg_info *info = dev;
+ int i;
+
+ for (i = 0; i < CHRG_INTR_END; i++) {
+ if (info->irq[i] == irq)
+ break;
+ }
+
+ if (i >= CHRG_INTR_END) {
+ dev_warn(&info->pdev->dev, "spurious interrupt!!\n");
+ return IRQ_NONE;
+ }
+
+ switch (i) {
+ case VBUS_OV_IRQ:
+ dev_dbg(&info->pdev->dev, "VBUS Over Voltage INTR\n");
+ break;
+ case CHARGE_DONE_IRQ:
+ dev_dbg(&info->pdev->dev, "Charging Done INTR\n");
+ break;
+ case CHARGE_CHARGING_IRQ:
+ dev_dbg(&info->pdev->dev, "Start Charging IRQ\n");
+ break;
+ case BAT_SAFE_QUIT_IRQ:
+ dev_dbg(&info->pdev->dev,
+ "Quit Safe Mode(restart timer) Charging IRQ\n");
+ break;
+ case BAT_SAFE_ENTER_IRQ:
+ dev_dbg(&info->pdev->dev,
+ "Enter Safe Mode(timer expire) Charging IRQ\n");
+ break;
+ case QCBTU_IRQ:
+ dev_dbg(&info->pdev->dev,
+ "Quit Battery Under Temperature(CHRG) INTR\n");
+ break;
+ case CBTU_IRQ:
+ dev_dbg(&info->pdev->dev,
+ "Hit Battery Under Temperature(CHRG) INTR\n");
+ break;
+ case QCBTO_IRQ:
+ dev_dbg(&info->pdev->dev,
+ "Quit Battery Over Temperature(CHRG) INTR\n");
+ break;
+ case CBTO_IRQ:
+ dev_dbg(&info->pdev->dev,
+ "Hit Battery Over Temperature(CHRG) INTR\n");
+ break;
+ default:
+ dev_warn(&info->pdev->dev, "Spurious Interrupt!!!\n");
+ goto out;
+ }
+
+ power_supply_changed(info->psy_usb);
+out:
+ return IRQ_HANDLED;
+}
+
+/*
+ * The HP Pavilion x2 10 series comes in a number of variants:
+ * Bay Trail SoC + AXP288 PMIC, Micro-USB, DMI_BOARD_NAME: "8021"
+ * Bay Trail SoC + AXP288 PMIC, Type-C, DMI_BOARD_NAME: "815D"
+ * Cherry Trail SoC + AXP288 PMIC, Type-C, DMI_BOARD_NAME: "813E"
+ * Cherry Trail SoC + TI PMIC, Type-C, DMI_BOARD_NAME: "827C" or "82F4"
+ *
+ * The variants with the AXP288 + Type-C connector are all kinds of special:
+ *
+ * 1. They use a Type-C connector which the AXP288 does not support, so when
+ * using a Type-C charger it is not recognized. Unlike most AXP288 devices,
+ * this model actually has mostly working ACPI AC / Battery code, the ACPI code
+ * "solves" this by simply setting the input_current_limit to 3A.
+ * There are still some issues with the ACPI code, so we use this native driver,
+ * and to solve the charging not working (500mA is not enough) issue we hardcode
+ * the 3A input_current_limit like the ACPI code does.
+ *
+ * 2. If no charger is connected the machine boots with the vbus-path disabled.
+ * Normally this is done when a 5V boost converter is active to avoid the PMIC
+ * trying to charge from the 5V boost converter's output. This is done when
+ * an OTG host cable is inserted and the ID pin on the micro-B receptacle is
+ * pulled low and the ID pin has an ACPI event handler associated with it
+ * which re-enables the vbus-path when the ID pin is pulled high when the
+ * OTG host cable is removed. The Type-C connector has no ID pin, there is
+ * no ID pin handler and there appears to be no 5V boost converter, so we
+ * end up not charging because the vbus-path is disabled, until we unplug
+ * the charger which automatically clears the vbus-path disable bit and then
+ * on the second plug-in of the adapter we start charging. To solve the not
+ * charging on first charger plugin we unconditionally enable the vbus-path at
+ * probe on this model, which is safe since there is no 5V boost converter.
+ */
+static const struct dmi_system_id axp288_hp_x2_dmi_ids[] = {
+ {
+ .matches = {
+ DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
+ DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "HP Pavilion x2 Detachable"),
+ DMI_EXACT_MATCH(DMI_BOARD_NAME, "815D"),
+ },
+ },
+ {
+ .matches = {
+ DMI_EXACT_MATCH(DMI_SYS_VENDOR, "HP"),
+ DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "HP Pavilion x2 Detachable"),
+ DMI_EXACT_MATCH(DMI_BOARD_NAME, "813E"),
+ },
+ },
+ {} /* Terminating entry */
+};
+
+static void axp288_charger_extcon_evt_worker(struct work_struct *work)
+{
+ struct axp288_chrg_info *info =
+ container_of(work, struct axp288_chrg_info, cable.work);
+ int ret, current_limit;
+ struct extcon_dev *edev = info->cable.edev;
+ unsigned int val;
+
+ ret = regmap_read(info->regmap, AXP20X_PWR_INPUT_STATUS, &val);
+ if (ret < 0) {
+ dev_err(&info->pdev->dev, "Error reading status (%d)\n", ret);
+ return;
+ }
+
+ /* Offline? Disable charging and bail */
+ if (!(val & PS_STAT_VBUS_VALID)) {
+ dev_dbg(&info->pdev->dev, "USB charger disconnected\n");
+ axp288_charger_enable_charger(info, false);
+ power_supply_changed(info->psy_usb);
+ return;
+ }
+
+ /* Determine cable/charger type */
+ if (dmi_check_system(axp288_hp_x2_dmi_ids)) {
+ /* See comment above axp288_hp_x2_dmi_ids declaration */
+ dev_dbg(&info->pdev->dev, "HP X2 with Type-C, setting inlmt to 3A\n");
+ current_limit = 3000000;
+ } else if (extcon_get_state(edev, EXTCON_CHG_USB_SDP) > 0) {
+ dev_dbg(&info->pdev->dev, "USB SDP charger is connected\n");
+ current_limit = 500000;
+ } else if (extcon_get_state(edev, EXTCON_CHG_USB_CDP) > 0) {
+ dev_dbg(&info->pdev->dev, "USB CDP charger is connected\n");
+ current_limit = 1500000;
+ } else if (extcon_get_state(edev, EXTCON_CHG_USB_DCP) > 0) {
+ dev_dbg(&info->pdev->dev, "USB DCP charger is connected\n");
+ current_limit = 2000000;
+ } else {
+ /* Charger type detection still in progress, bail. */
+ return;
+ }
+
+ /* Set vbus current limit first, then enable charger */
+ ret = axp288_charger_set_vbus_inlmt(info, current_limit);
+ if (ret == 0)
+ axp288_charger_enable_charger(info, true);
+ else
+ dev_err(&info->pdev->dev,
+ "error setting current limit (%d)\n", ret);
+
+ power_supply_changed(info->psy_usb);
+}
+
+static int axp288_charger_handle_cable_evt(struct notifier_block *nb,
+ unsigned long event, void *param)
+{
+ struct axp288_chrg_info *info =
+ container_of(nb, struct axp288_chrg_info, cable.nb);
+ schedule_work(&info->cable.work);
+ return NOTIFY_OK;
+}
+
+static void axp288_charger_otg_evt_worker(struct work_struct *work)
+{
+ struct axp288_chrg_info *info =
+ container_of(work, struct axp288_chrg_info, otg.work);
+ struct extcon_dev *edev = info->otg.cable;
+ int ret, usb_host = extcon_get_state(edev, EXTCON_USB_HOST);
+
+ dev_dbg(&info->pdev->dev, "external connector USB-Host is %s\n",
+ usb_host ? "attached" : "detached");
+
+ /*
+ * Set usb_id_short flag to avoid running charger detection logic
+ * in case usb host.
+ */
+ info->otg.id_short = usb_host;
+
+ /* Disable VBUS path before enabling the 5V boost */
+ ret = axp288_charger_vbus_path_select(info, !info->otg.id_short);
+ if (ret < 0)
+ dev_warn(&info->pdev->dev, "vbus path disable failed\n");
+}
+
+static int axp288_charger_handle_otg_evt(struct notifier_block *nb,
+ unsigned long event, void *param)
+{
+ struct axp288_chrg_info *info =
+ container_of(nb, struct axp288_chrg_info, otg.id_nb);
+
+ schedule_work(&info->otg.work);
+
+ return NOTIFY_OK;
+}
+
+static int charger_init_hw_regs(struct axp288_chrg_info *info)
+{
+ int ret, cc, cv;
+ unsigned int val;
+
+ /* Program temperature thresholds */
+ ret = regmap_write(info->regmap, AXP20X_V_LTF_CHRG, CHRG_VLTFC_0C);
+ if (ret < 0) {
+ dev_err(&info->pdev->dev, "register(%x) write error(%d)\n",
+ AXP20X_V_LTF_CHRG, ret);
+ return ret;
+ }
+
+ ret = regmap_write(info->regmap, AXP20X_V_HTF_CHRG, CHRG_VHTFC_45C);
+ if (ret < 0) {
+ dev_err(&info->pdev->dev, "register(%x) write error(%d)\n",
+ AXP20X_V_HTF_CHRG, ret);
+ return ret;
+ }
+
+ /* Do not turn-off charger o/p after charge cycle ends */
+ ret = regmap_update_bits(info->regmap,
+ AXP20X_CHRG_CTRL2,
+ CNTL2_CHG_OUT_TURNON, CNTL2_CHG_OUT_TURNON);
+ if (ret < 0) {
+ dev_err(&info->pdev->dev, "register(%x) write error(%d)\n",
+ AXP20X_CHRG_CTRL2, ret);
+ return ret;
+ }
+
+ /* Setup ending condition for charging to be 10% of I(chrg) */
+ ret = regmap_update_bits(info->regmap,
+ AXP20X_CHRG_CTRL1,
+ CHRG_CCCV_ITERM_20P, 0);
+ if (ret < 0) {
+ dev_err(&info->pdev->dev, "register(%x) write error(%d)\n",
+ AXP20X_CHRG_CTRL1, ret);
+ return ret;
+ }
+
+ /* Disable OCV-SOC curve calibration */
+ ret = regmap_update_bits(info->regmap,
+ AXP20X_CC_CTRL,
+ FG_CNTL_OCV_ADJ_EN, 0);
+ if (ret < 0) {
+ dev_err(&info->pdev->dev, "register(%x) write error(%d)\n",
+ AXP20X_CC_CTRL, ret);
+ return ret;
+ }
+
+ if (dmi_check_system(axp288_hp_x2_dmi_ids)) {
+ /* See comment above axp288_hp_x2_dmi_ids declaration */
+ ret = axp288_charger_vbus_path_select(info, true);
+ if (ret < 0)
+ return ret;
+ } else {
+ /* Set Vhold to the factory default / recommended 4.4V */
+ val = VBUS_ISPOUT_VHOLD_SET_4400MV << VBUS_ISPOUT_VHOLD_SET_BIT_POS;
+ ret = regmap_update_bits(info->regmap, AXP20X_VBUS_IPSOUT_MGMT,
+ VBUS_ISPOUT_VHOLD_SET_MASK, val);
+ if (ret < 0) {
+ dev_err(&info->pdev->dev, "register(%x) write error(%d)\n",
+ AXP20X_VBUS_IPSOUT_MGMT, ret);
+ return ret;
+ }
+ }
+
+ /* Read current charge voltage and current limit */
+ ret = regmap_read(info->regmap, AXP20X_CHRG_CTRL1, &val);
+ if (ret < 0) {
+ dev_err(&info->pdev->dev, "register(%x) read error(%d)\n",
+ AXP20X_CHRG_CTRL1, ret);
+ return ret;
+ }
+
+ /* Determine charge voltage */
+ cv = (val & CHRG_CCCV_CV_MASK) >> CHRG_CCCV_CV_BIT_POS;
+ switch (cv) {
+ case CHRG_CCCV_CV_4100MV:
+ info->cv = CV_4100MV;
+ break;
+ case CHRG_CCCV_CV_4150MV:
+ info->cv = CV_4150MV;
+ break;
+ case CHRG_CCCV_CV_4200MV:
+ info->cv = CV_4200MV;
+ break;
+ case CHRG_CCCV_CV_4350MV:
+ info->cv = CV_4350MV;
+ break;
+ }
+
+ /* Determine charge current limit */
+ cc = (val & CHRG_CCCV_CC_MASK) >> CHRG_CCCV_CC_BIT_POS;
+ cc = (cc * CHRG_CCCV_CC_LSB_RES) + CHRG_CCCV_CC_OFFSET;
+ info->cc = cc;
+
+ /*
+ * Do not allow the user to configure higher settings then those
+ * set by the firmware
+ */
+ info->max_cv = info->cv;
+ info->max_cc = info->cc;
+
+ return 0;
+}
+
+static void axp288_charger_cancel_work(void *data)
+{
+ struct axp288_chrg_info *info = data;
+
+ cancel_work_sync(&info->otg.work);
+ cancel_work_sync(&info->cable.work);
+}
+
+static int axp288_charger_probe(struct platform_device *pdev)
+{
+ int ret, i, pirq;
+ struct axp288_chrg_info *info;
+ struct device *dev = &pdev->dev;
+ struct axp20x_dev *axp20x = dev_get_drvdata(pdev->dev.parent);
+ struct power_supply_config charger_cfg = {};
+ unsigned int val;
+
+ /*
+ * On some devices the fuelgauge and charger parts of the axp288 are
+ * not used, check that the fuelgauge is enabled (CC_CTRL != 0).
+ */
+ ret = regmap_read(axp20x->regmap, AXP20X_CC_CTRL, &val);
+ if (ret < 0)
+ return ret;
+ if (val == 0)
+ return -ENODEV;
+
+ info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL);
+ if (!info)
+ return -ENOMEM;
+
+ info->pdev = pdev;
+ info->regmap = axp20x->regmap;
+ info->regmap_irqc = axp20x->regmap_irqc;
+
+ info->cable.edev = extcon_get_extcon_dev(AXP288_EXTCON_DEV_NAME);
+ if (info->cable.edev == NULL) {
+ dev_dbg(&pdev->dev, "%s is not ready, probe deferred\n",
+ AXP288_EXTCON_DEV_NAME);
+ return -EPROBE_DEFER;
+ }
+
+ if (acpi_dev_present(USB_HOST_EXTCON_HID, NULL, -1)) {
+ info->otg.cable = extcon_get_extcon_dev(USB_HOST_EXTCON_NAME);
+ if (info->otg.cable == NULL) {
+ dev_dbg(dev, "EXTCON_USB_HOST is not ready, probe deferred\n");
+ return -EPROBE_DEFER;
+ }
+ dev_info(&pdev->dev,
+ "Using " USB_HOST_EXTCON_HID " extcon for usb-id\n");
+ }
+
+ platform_set_drvdata(pdev, info);
+
+ ret = charger_init_hw_regs(info);
+ if (ret)
+ return ret;
+
+ /* Register with power supply class */
+ charger_cfg.drv_data = info;
+ info->psy_usb = devm_power_supply_register(dev, &axp288_charger_desc,
+ &charger_cfg);
+ if (IS_ERR(info->psy_usb)) {
+ ret = PTR_ERR(info->psy_usb);
+ dev_err(dev, "failed to register power supply: %d\n", ret);
+ return ret;
+ }
+
+ /* Cancel our work on cleanup, register this before the notifiers */
+ ret = devm_add_action(dev, axp288_charger_cancel_work, info);
+ if (ret)
+ return ret;
+
+ /* Register for extcon notification */
+ INIT_WORK(&info->cable.work, axp288_charger_extcon_evt_worker);
+ info->cable.nb.notifier_call = axp288_charger_handle_cable_evt;
+ ret = devm_extcon_register_notifier_all(dev, info->cable.edev,
+ &info->cable.nb);
+ if (ret) {
+ dev_err(dev, "failed to register cable extcon notifier\n");
+ return ret;
+ }
+ schedule_work(&info->cable.work);
+
+ /* Register for OTG notification */
+ INIT_WORK(&info->otg.work, axp288_charger_otg_evt_worker);
+ info->otg.id_nb.notifier_call = axp288_charger_handle_otg_evt;
+ if (info->otg.cable) {
+ ret = devm_extcon_register_notifier(&pdev->dev, info->otg.cable,
+ EXTCON_USB_HOST, &info->otg.id_nb);
+ if (ret) {
+ dev_err(dev, "failed to register EXTCON_USB_HOST notifier\n");
+ return ret;
+ }
+ schedule_work(&info->otg.work);
+ }
+
+ /* Register charger interrupts */
+ for (i = 0; i < CHRG_INTR_END; i++) {
+ pirq = platform_get_irq(info->pdev, i);
+ if (pirq < 0)
+ return pirq;
+
+ info->irq[i] = regmap_irq_get_virq(info->regmap_irqc, pirq);
+ if (info->irq[i] < 0) {
+ dev_warn(&info->pdev->dev,
+ "failed to get virtual interrupt=%d\n", pirq);
+ return info->irq[i];
+ }
+ ret = devm_request_threaded_irq(&info->pdev->dev, info->irq[i],
+ NULL, axp288_charger_irq_thread_handler,
+ IRQF_ONESHOT, info->pdev->name, info);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to request interrupt=%d\n",
+ info->irq[i]);
+ return ret;
+ }
+ }
+
+ return 0;
+}
+
+static const struct platform_device_id axp288_charger_id_table[] = {
+ { .name = "axp288_charger" },
+ {},
+};
+MODULE_DEVICE_TABLE(platform, axp288_charger_id_table);
+
+static struct platform_driver axp288_charger_driver = {
+ .probe = axp288_charger_probe,
+ .id_table = axp288_charger_id_table,
+ .driver = {
+ .name = "axp288_charger",
+ },
+};
+
+module_platform_driver(axp288_charger_driver);
+
+MODULE_AUTHOR("Ramakrishna Pallala <ramakrishna.pallala@intel.com>");
+MODULE_DESCRIPTION("X-power AXP288 Charger Driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/power/supply/axp288_fuel_gauge.c b/drivers/power/supply/axp288_fuel_gauge.c
new file mode 100644
index 000000000..be2452915
--- /dev/null
+++ b/drivers/power/supply/axp288_fuel_gauge.c
@@ -0,0 +1,894 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * axp288_fuel_gauge.c - Xpower AXP288 PMIC Fuel Gauge Driver
+ *
+ * Copyright (C) 2016-2017 Hans de Goede <hdegoede@redhat.com>
+ * Copyright (C) 2014 Intel Corporation
+ *
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ */
+
+#include <linux/dmi.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/regmap.h>
+#include <linux/jiffies.h>
+#include <linux/interrupt.h>
+#include <linux/mfd/axp20x.h>
+#include <linux/platform_device.h>
+#include <linux/power_supply.h>
+#include <linux/iio/consumer.h>
+#include <linux/debugfs.h>
+#include <linux/seq_file.h>
+#include <asm/unaligned.h>
+
+#define PS_STAT_VBUS_TRIGGER (1 << 0)
+#define PS_STAT_BAT_CHRG_DIR (1 << 2)
+#define PS_STAT_VBAT_ABOVE_VHOLD (1 << 3)
+#define PS_STAT_VBUS_VALID (1 << 4)
+#define PS_STAT_VBUS_PRESENT (1 << 5)
+
+#define CHRG_STAT_BAT_SAFE_MODE (1 << 3)
+#define CHRG_STAT_BAT_VALID (1 << 4)
+#define CHRG_STAT_BAT_PRESENT (1 << 5)
+#define CHRG_STAT_CHARGING (1 << 6)
+#define CHRG_STAT_PMIC_OTP (1 << 7)
+
+#define CHRG_CCCV_CC_MASK 0xf /* 4 bits */
+#define CHRG_CCCV_CC_BIT_POS 0
+#define CHRG_CCCV_CC_OFFSET 200 /* 200mA */
+#define CHRG_CCCV_CC_LSB_RES 200 /* 200mA */
+#define CHRG_CCCV_ITERM_20P (1 << 4) /* 20% of CC */
+#define CHRG_CCCV_CV_MASK 0x60 /* 2 bits */
+#define CHRG_CCCV_CV_BIT_POS 5
+#define CHRG_CCCV_CV_4100MV 0x0 /* 4.10V */
+#define CHRG_CCCV_CV_4150MV 0x1 /* 4.15V */
+#define CHRG_CCCV_CV_4200MV 0x2 /* 4.20V */
+#define CHRG_CCCV_CV_4350MV 0x3 /* 4.35V */
+#define CHRG_CCCV_CHG_EN (1 << 7)
+
+#define FG_CNTL_OCV_ADJ_STAT (1 << 2)
+#define FG_CNTL_OCV_ADJ_EN (1 << 3)
+#define FG_CNTL_CAP_ADJ_STAT (1 << 4)
+#define FG_CNTL_CAP_ADJ_EN (1 << 5)
+#define FG_CNTL_CC_EN (1 << 6)
+#define FG_CNTL_GAUGE_EN (1 << 7)
+
+#define FG_15BIT_WORD_VALID (1 << 15)
+#define FG_15BIT_VAL_MASK 0x7fff
+
+#define FG_REP_CAP_VALID (1 << 7)
+#define FG_REP_CAP_VAL_MASK 0x7F
+
+#define FG_DES_CAP1_VALID (1 << 7)
+#define FG_DES_CAP_RES_LSB 1456 /* 1.456mAhr */
+
+#define FG_DES_CC_RES_LSB 1456 /* 1.456mAhr */
+
+#define FG_OCV_CAP_VALID (1 << 7)
+#define FG_OCV_CAP_VAL_MASK 0x7F
+#define FG_CC_CAP_VALID (1 << 7)
+#define FG_CC_CAP_VAL_MASK 0x7F
+
+#define FG_LOW_CAP_THR1_MASK 0xf0 /* 5% tp 20% */
+#define FG_LOW_CAP_THR1_VAL 0xa0 /* 15 perc */
+#define FG_LOW_CAP_THR2_MASK 0x0f /* 0% to 15% */
+#define FG_LOW_CAP_WARN_THR 14 /* 14 perc */
+#define FG_LOW_CAP_CRIT_THR 4 /* 4 perc */
+#define FG_LOW_CAP_SHDN_THR 0 /* 0 perc */
+
+#define NR_RETRY_CNT 3
+#define DEV_NAME "axp288_fuel_gauge"
+
+/* 1.1mV per LSB expressed in uV */
+#define VOLTAGE_FROM_ADC(a) ((a * 11) / 10)
+/* properties converted to uV, uA */
+#define PROP_VOLT(a) ((a) * 1000)
+#define PROP_CURR(a) ((a) * 1000)
+
+#define AXP288_FG_INTR_NUM 6
+enum {
+ QWBTU_IRQ = 0,
+ WBTU_IRQ,
+ QWBTO_IRQ,
+ WBTO_IRQ,
+ WL2_IRQ,
+ WL1_IRQ,
+};
+
+enum {
+ BAT_TEMP = 0,
+ PMIC_TEMP,
+ SYSTEM_TEMP,
+ BAT_CHRG_CURR,
+ BAT_D_CURR,
+ BAT_VOLT,
+ IIO_CHANNEL_NUM
+};
+
+struct axp288_fg_info {
+ struct platform_device *pdev;
+ struct regmap *regmap;
+ struct regmap_irq_chip_data *regmap_irqc;
+ int irq[AXP288_FG_INTR_NUM];
+ struct iio_channel *iio_channel[IIO_CHANNEL_NUM];
+ struct power_supply *bat;
+ struct mutex lock;
+ int status;
+ int max_volt;
+ struct dentry *debug_file;
+};
+
+static enum power_supply_property fuel_gauge_props[] = {
+ POWER_SUPPLY_PROP_STATUS,
+ POWER_SUPPLY_PROP_PRESENT,
+ POWER_SUPPLY_PROP_HEALTH,
+ POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN,
+ POWER_SUPPLY_PROP_VOLTAGE_NOW,
+ POWER_SUPPLY_PROP_VOLTAGE_OCV,
+ POWER_SUPPLY_PROP_CURRENT_NOW,
+ POWER_SUPPLY_PROP_CAPACITY,
+ POWER_SUPPLY_PROP_CAPACITY_ALERT_MIN,
+ POWER_SUPPLY_PROP_TECHNOLOGY,
+ POWER_SUPPLY_PROP_CHARGE_FULL,
+ POWER_SUPPLY_PROP_CHARGE_NOW,
+};
+
+static int fuel_gauge_reg_readb(struct axp288_fg_info *info, int reg)
+{
+ int ret, i;
+ unsigned int val;
+
+ for (i = 0; i < NR_RETRY_CNT; i++) {
+ ret = regmap_read(info->regmap, reg, &val);
+ if (ret == -EBUSY)
+ continue;
+ else
+ break;
+ }
+
+ if (ret < 0) {
+ dev_err(&info->pdev->dev, "Error reading reg 0x%02x err: %d\n", reg, ret);
+ return ret;
+ }
+
+ return val;
+}
+
+static int fuel_gauge_reg_writeb(struct axp288_fg_info *info, int reg, u8 val)
+{
+ int ret;
+
+ ret = regmap_write(info->regmap, reg, (unsigned int)val);
+
+ if (ret < 0)
+ dev_err(&info->pdev->dev, "Error writing reg 0x%02x err: %d\n", reg, ret);
+
+ return ret;
+}
+
+static int fuel_gauge_read_15bit_word(struct axp288_fg_info *info, int reg)
+{
+ unsigned char buf[2];
+ int ret;
+
+ ret = regmap_bulk_read(info->regmap, reg, buf, 2);
+ if (ret < 0) {
+ dev_err(&info->pdev->dev, "Error reading reg 0x%02x err: %d\n",
+ reg, ret);
+ return ret;
+ }
+
+ ret = get_unaligned_be16(buf);
+ if (!(ret & FG_15BIT_WORD_VALID)) {
+ dev_err(&info->pdev->dev, "Error reg 0x%02x contents not valid\n",
+ reg);
+ return -ENXIO;
+ }
+
+ return ret & FG_15BIT_VAL_MASK;
+}
+
+static int fuel_gauge_read_12bit_word(struct axp288_fg_info *info, int reg)
+{
+ unsigned char buf[2];
+ int ret;
+
+ ret = regmap_bulk_read(info->regmap, reg, buf, 2);
+ if (ret < 0) {
+ dev_err(&info->pdev->dev, "Error reading reg 0x%02x err: %d\n",
+ reg, ret);
+ return ret;
+ }
+
+ /* 12-bit data values have upper 8 bits in buf[0], lower 4 in buf[1] */
+ return (buf[0] << 4) | ((buf[1] >> 4) & 0x0f);
+}
+
+#ifdef CONFIG_DEBUG_FS
+static int fuel_gauge_debug_show(struct seq_file *s, void *data)
+{
+ struct axp288_fg_info *info = s->private;
+ int raw_val, ret;
+
+ seq_printf(s, " PWR_STATUS[%02x] : %02x\n",
+ AXP20X_PWR_INPUT_STATUS,
+ fuel_gauge_reg_readb(info, AXP20X_PWR_INPUT_STATUS));
+ seq_printf(s, "PWR_OP_MODE[%02x] : %02x\n",
+ AXP20X_PWR_OP_MODE,
+ fuel_gauge_reg_readb(info, AXP20X_PWR_OP_MODE));
+ seq_printf(s, " CHRG_CTRL1[%02x] : %02x\n",
+ AXP20X_CHRG_CTRL1,
+ fuel_gauge_reg_readb(info, AXP20X_CHRG_CTRL1));
+ seq_printf(s, " VLTF[%02x] : %02x\n",
+ AXP20X_V_LTF_DISCHRG,
+ fuel_gauge_reg_readb(info, AXP20X_V_LTF_DISCHRG));
+ seq_printf(s, " VHTF[%02x] : %02x\n",
+ AXP20X_V_HTF_DISCHRG,
+ fuel_gauge_reg_readb(info, AXP20X_V_HTF_DISCHRG));
+ seq_printf(s, " CC_CTRL[%02x] : %02x\n",
+ AXP20X_CC_CTRL,
+ fuel_gauge_reg_readb(info, AXP20X_CC_CTRL));
+ seq_printf(s, "BATTERY CAP[%02x] : %02x\n",
+ AXP20X_FG_RES,
+ fuel_gauge_reg_readb(info, AXP20X_FG_RES));
+ seq_printf(s, " FG_RDC1[%02x] : %02x\n",
+ AXP288_FG_RDC1_REG,
+ fuel_gauge_reg_readb(info, AXP288_FG_RDC1_REG));
+ seq_printf(s, " FG_RDC0[%02x] : %02x\n",
+ AXP288_FG_RDC0_REG,
+ fuel_gauge_reg_readb(info, AXP288_FG_RDC0_REG));
+ seq_printf(s, " FG_OCV[%02x] : %04x\n",
+ AXP288_FG_OCVH_REG,
+ fuel_gauge_read_12bit_word(info, AXP288_FG_OCVH_REG));
+ seq_printf(s, " FG_DES_CAP[%02x] : %04x\n",
+ AXP288_FG_DES_CAP1_REG,
+ fuel_gauge_read_15bit_word(info, AXP288_FG_DES_CAP1_REG));
+ seq_printf(s, " FG_CC_MTR[%02x] : %04x\n",
+ AXP288_FG_CC_MTR1_REG,
+ fuel_gauge_read_15bit_word(info, AXP288_FG_CC_MTR1_REG));
+ seq_printf(s, " FG_OCV_CAP[%02x] : %02x\n",
+ AXP288_FG_OCV_CAP_REG,
+ fuel_gauge_reg_readb(info, AXP288_FG_OCV_CAP_REG));
+ seq_printf(s, " FG_CC_CAP[%02x] : %02x\n",
+ AXP288_FG_CC_CAP_REG,
+ fuel_gauge_reg_readb(info, AXP288_FG_CC_CAP_REG));
+ seq_printf(s, " FG_LOW_CAP[%02x] : %02x\n",
+ AXP288_FG_LOW_CAP_REG,
+ fuel_gauge_reg_readb(info, AXP288_FG_LOW_CAP_REG));
+ seq_printf(s, "TUNING_CTL0[%02x] : %02x\n",
+ AXP288_FG_TUNE0,
+ fuel_gauge_reg_readb(info, AXP288_FG_TUNE0));
+ seq_printf(s, "TUNING_CTL1[%02x] : %02x\n",
+ AXP288_FG_TUNE1,
+ fuel_gauge_reg_readb(info, AXP288_FG_TUNE1));
+ seq_printf(s, "TUNING_CTL2[%02x] : %02x\n",
+ AXP288_FG_TUNE2,
+ fuel_gauge_reg_readb(info, AXP288_FG_TUNE2));
+ seq_printf(s, "TUNING_CTL3[%02x] : %02x\n",
+ AXP288_FG_TUNE3,
+ fuel_gauge_reg_readb(info, AXP288_FG_TUNE3));
+ seq_printf(s, "TUNING_CTL4[%02x] : %02x\n",
+ AXP288_FG_TUNE4,
+ fuel_gauge_reg_readb(info, AXP288_FG_TUNE4));
+ seq_printf(s, "TUNING_CTL5[%02x] : %02x\n",
+ AXP288_FG_TUNE5,
+ fuel_gauge_reg_readb(info, AXP288_FG_TUNE5));
+
+ ret = iio_read_channel_raw(info->iio_channel[BAT_TEMP], &raw_val);
+ if (ret >= 0)
+ seq_printf(s, "axp288-batttemp : %d\n", raw_val);
+ ret = iio_read_channel_raw(info->iio_channel[PMIC_TEMP], &raw_val);
+ if (ret >= 0)
+ seq_printf(s, "axp288-pmictemp : %d\n", raw_val);
+ ret = iio_read_channel_raw(info->iio_channel[SYSTEM_TEMP], &raw_val);
+ if (ret >= 0)
+ seq_printf(s, "axp288-systtemp : %d\n", raw_val);
+ ret = iio_read_channel_raw(info->iio_channel[BAT_CHRG_CURR], &raw_val);
+ if (ret >= 0)
+ seq_printf(s, "axp288-chrgcurr : %d\n", raw_val);
+ ret = iio_read_channel_raw(info->iio_channel[BAT_D_CURR], &raw_val);
+ if (ret >= 0)
+ seq_printf(s, "axp288-dchrgcur : %d\n", raw_val);
+ ret = iio_read_channel_raw(info->iio_channel[BAT_VOLT], &raw_val);
+ if (ret >= 0)
+ seq_printf(s, "axp288-battvolt : %d\n", raw_val);
+
+ return 0;
+}
+
+DEFINE_SHOW_ATTRIBUTE(fuel_gauge_debug);
+
+static void fuel_gauge_create_debugfs(struct axp288_fg_info *info)
+{
+ info->debug_file = debugfs_create_file("fuelgauge", 0666, NULL,
+ info, &fuel_gauge_debug_fops);
+}
+
+static void fuel_gauge_remove_debugfs(struct axp288_fg_info *info)
+{
+ debugfs_remove(info->debug_file);
+}
+#else
+static inline void fuel_gauge_create_debugfs(struct axp288_fg_info *info)
+{
+}
+static inline void fuel_gauge_remove_debugfs(struct axp288_fg_info *info)
+{
+}
+#endif
+
+static void fuel_gauge_get_status(struct axp288_fg_info *info)
+{
+ int pwr_stat, fg_res, curr, ret;
+
+ pwr_stat = fuel_gauge_reg_readb(info, AXP20X_PWR_INPUT_STATUS);
+ if (pwr_stat < 0) {
+ dev_err(&info->pdev->dev,
+ "PWR STAT read failed:%d\n", pwr_stat);
+ return;
+ }
+
+ /* Report full if Vbus is valid and the reported capacity is 100% */
+ if (!(pwr_stat & PS_STAT_VBUS_VALID))
+ goto not_full;
+
+ fg_res = fuel_gauge_reg_readb(info, AXP20X_FG_RES);
+ if (fg_res < 0) {
+ dev_err(&info->pdev->dev, "FG RES read failed: %d\n", fg_res);
+ return;
+ }
+ if (!(fg_res & FG_REP_CAP_VALID))
+ goto not_full;
+
+ fg_res &= ~FG_REP_CAP_VALID;
+ if (fg_res == 100) {
+ info->status = POWER_SUPPLY_STATUS_FULL;
+ return;
+ }
+
+ /*
+ * Sometimes the charger turns itself off before fg-res reaches 100%.
+ * When this happens the AXP288 reports a not-charging status and
+ * 0 mA discharge current.
+ */
+ if (fg_res < 90 || (pwr_stat & PS_STAT_BAT_CHRG_DIR))
+ goto not_full;
+
+ ret = iio_read_channel_raw(info->iio_channel[BAT_D_CURR], &curr);
+ if (ret < 0) {
+ dev_err(&info->pdev->dev, "FG get current failed: %d\n", ret);
+ return;
+ }
+ if (curr == 0) {
+ info->status = POWER_SUPPLY_STATUS_FULL;
+ return;
+ }
+
+not_full:
+ if (pwr_stat & PS_STAT_BAT_CHRG_DIR)
+ info->status = POWER_SUPPLY_STATUS_CHARGING;
+ else
+ info->status = POWER_SUPPLY_STATUS_DISCHARGING;
+}
+
+static int fuel_gauge_get_vbatt(struct axp288_fg_info *info, int *vbatt)
+{
+ int ret = 0, raw_val;
+
+ ret = iio_read_channel_raw(info->iio_channel[BAT_VOLT], &raw_val);
+ if (ret < 0)
+ goto vbatt_read_fail;
+
+ *vbatt = VOLTAGE_FROM_ADC(raw_val);
+vbatt_read_fail:
+ return ret;
+}
+
+static int fuel_gauge_get_current(struct axp288_fg_info *info, int *cur)
+{
+ int ret, discharge;
+
+ /* First check discharge current, so that we do only 1 read on bat. */
+ ret = iio_read_channel_raw(info->iio_channel[BAT_D_CURR], &discharge);
+ if (ret < 0)
+ return ret;
+
+ if (discharge > 0) {
+ *cur = -1 * discharge;
+ return 0;
+ }
+
+ return iio_read_channel_raw(info->iio_channel[BAT_CHRG_CURR], cur);
+}
+
+static int fuel_gauge_get_vocv(struct axp288_fg_info *info, int *vocv)
+{
+ int ret;
+
+ ret = fuel_gauge_read_12bit_word(info, AXP288_FG_OCVH_REG);
+ if (ret >= 0)
+ *vocv = VOLTAGE_FROM_ADC(ret);
+
+ return ret;
+}
+
+static int fuel_gauge_battery_health(struct axp288_fg_info *info)
+{
+ int ret, vocv, health = POWER_SUPPLY_HEALTH_UNKNOWN;
+
+ ret = fuel_gauge_get_vocv(info, &vocv);
+ if (ret < 0)
+ goto health_read_fail;
+
+ if (vocv > info->max_volt)
+ health = POWER_SUPPLY_HEALTH_OVERVOLTAGE;
+ else
+ health = POWER_SUPPLY_HEALTH_GOOD;
+
+health_read_fail:
+ return health;
+}
+
+static int fuel_gauge_get_property(struct power_supply *ps,
+ enum power_supply_property prop,
+ union power_supply_propval *val)
+{
+ struct axp288_fg_info *info = power_supply_get_drvdata(ps);
+ int ret = 0, value;
+
+ mutex_lock(&info->lock);
+ switch (prop) {
+ case POWER_SUPPLY_PROP_STATUS:
+ fuel_gauge_get_status(info);
+ val->intval = info->status;
+ break;
+ case POWER_SUPPLY_PROP_HEALTH:
+ val->intval = fuel_gauge_battery_health(info);
+ break;
+ case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+ ret = fuel_gauge_get_vbatt(info, &value);
+ if (ret < 0)
+ goto fuel_gauge_read_err;
+ val->intval = PROP_VOLT(value);
+ break;
+ case POWER_SUPPLY_PROP_VOLTAGE_OCV:
+ ret = fuel_gauge_get_vocv(info, &value);
+ if (ret < 0)
+ goto fuel_gauge_read_err;
+ val->intval = PROP_VOLT(value);
+ break;
+ case POWER_SUPPLY_PROP_CURRENT_NOW:
+ ret = fuel_gauge_get_current(info, &value);
+ if (ret < 0)
+ goto fuel_gauge_read_err;
+ val->intval = PROP_CURR(value);
+ break;
+ case POWER_SUPPLY_PROP_PRESENT:
+ ret = fuel_gauge_reg_readb(info, AXP20X_PWR_OP_MODE);
+ if (ret < 0)
+ goto fuel_gauge_read_err;
+
+ if (ret & CHRG_STAT_BAT_PRESENT)
+ val->intval = 1;
+ else
+ val->intval = 0;
+ break;
+ case POWER_SUPPLY_PROP_CAPACITY:
+ ret = fuel_gauge_reg_readb(info, AXP20X_FG_RES);
+ if (ret < 0)
+ goto fuel_gauge_read_err;
+
+ if (!(ret & FG_REP_CAP_VALID))
+ dev_err(&info->pdev->dev,
+ "capacity measurement not valid\n");
+ val->intval = (ret & FG_REP_CAP_VAL_MASK);
+ break;
+ case POWER_SUPPLY_PROP_CAPACITY_ALERT_MIN:
+ ret = fuel_gauge_reg_readb(info, AXP288_FG_LOW_CAP_REG);
+ if (ret < 0)
+ goto fuel_gauge_read_err;
+ val->intval = (ret & 0x0f);
+ break;
+ case POWER_SUPPLY_PROP_TECHNOLOGY:
+ val->intval = POWER_SUPPLY_TECHNOLOGY_LION;
+ break;
+ case POWER_SUPPLY_PROP_CHARGE_NOW:
+ ret = fuel_gauge_read_15bit_word(info, AXP288_FG_CC_MTR1_REG);
+ if (ret < 0)
+ goto fuel_gauge_read_err;
+
+ val->intval = ret * FG_DES_CAP_RES_LSB;
+ break;
+ case POWER_SUPPLY_PROP_CHARGE_FULL:
+ ret = fuel_gauge_read_15bit_word(info, AXP288_FG_DES_CAP1_REG);
+ if (ret < 0)
+ goto fuel_gauge_read_err;
+
+ val->intval = ret * FG_DES_CAP_RES_LSB;
+ break;
+ case POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN:
+ val->intval = PROP_VOLT(info->max_volt);
+ break;
+ default:
+ mutex_unlock(&info->lock);
+ return -EINVAL;
+ }
+
+ mutex_unlock(&info->lock);
+ return 0;
+
+fuel_gauge_read_err:
+ mutex_unlock(&info->lock);
+ return ret;
+}
+
+static int fuel_gauge_set_property(struct power_supply *ps,
+ enum power_supply_property prop,
+ const union power_supply_propval *val)
+{
+ struct axp288_fg_info *info = power_supply_get_drvdata(ps);
+ int ret = 0;
+
+ mutex_lock(&info->lock);
+ switch (prop) {
+ case POWER_SUPPLY_PROP_CAPACITY_ALERT_MIN:
+ if ((val->intval < 0) || (val->intval > 15)) {
+ ret = -EINVAL;
+ break;
+ }
+ ret = fuel_gauge_reg_readb(info, AXP288_FG_LOW_CAP_REG);
+ if (ret < 0)
+ break;
+ ret &= 0xf0;
+ ret |= (val->intval & 0xf);
+ ret = fuel_gauge_reg_writeb(info, AXP288_FG_LOW_CAP_REG, ret);
+ break;
+ default:
+ ret = -EINVAL;
+ break;
+ }
+
+ mutex_unlock(&info->lock);
+ return ret;
+}
+
+static int fuel_gauge_property_is_writeable(struct power_supply *psy,
+ enum power_supply_property psp)
+{
+ int ret;
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_CAPACITY_ALERT_MIN:
+ ret = 1;
+ break;
+ default:
+ ret = 0;
+ }
+
+ return ret;
+}
+
+static irqreturn_t fuel_gauge_thread_handler(int irq, void *dev)
+{
+ struct axp288_fg_info *info = dev;
+ int i;
+
+ for (i = 0; i < AXP288_FG_INTR_NUM; i++) {
+ if (info->irq[i] == irq)
+ break;
+ }
+
+ if (i >= AXP288_FG_INTR_NUM) {
+ dev_warn(&info->pdev->dev, "spurious interrupt!!\n");
+ return IRQ_NONE;
+ }
+
+ switch (i) {
+ case QWBTU_IRQ:
+ dev_info(&info->pdev->dev,
+ "Quit Battery under temperature in work mode IRQ (QWBTU)\n");
+ break;
+ case WBTU_IRQ:
+ dev_info(&info->pdev->dev,
+ "Battery under temperature in work mode IRQ (WBTU)\n");
+ break;
+ case QWBTO_IRQ:
+ dev_info(&info->pdev->dev,
+ "Quit Battery over temperature in work mode IRQ (QWBTO)\n");
+ break;
+ case WBTO_IRQ:
+ dev_info(&info->pdev->dev,
+ "Battery over temperature in work mode IRQ (WBTO)\n");
+ break;
+ case WL2_IRQ:
+ dev_info(&info->pdev->dev, "Low Batt Warning(2) INTR\n");
+ break;
+ case WL1_IRQ:
+ dev_info(&info->pdev->dev, "Low Batt Warning(1) INTR\n");
+ break;
+ default:
+ dev_warn(&info->pdev->dev, "Spurious Interrupt!!!\n");
+ }
+
+ power_supply_changed(info->bat);
+ return IRQ_HANDLED;
+}
+
+static void fuel_gauge_external_power_changed(struct power_supply *psy)
+{
+ struct axp288_fg_info *info = power_supply_get_drvdata(psy);
+
+ power_supply_changed(info->bat);
+}
+
+static const struct power_supply_desc fuel_gauge_desc = {
+ .name = DEV_NAME,
+ .type = POWER_SUPPLY_TYPE_BATTERY,
+ .properties = fuel_gauge_props,
+ .num_properties = ARRAY_SIZE(fuel_gauge_props),
+ .get_property = fuel_gauge_get_property,
+ .set_property = fuel_gauge_set_property,
+ .property_is_writeable = fuel_gauge_property_is_writeable,
+ .external_power_changed = fuel_gauge_external_power_changed,
+};
+
+static void fuel_gauge_init_irq(struct axp288_fg_info *info)
+{
+ int ret, i, pirq;
+
+ for (i = 0; i < AXP288_FG_INTR_NUM; i++) {
+ pirq = platform_get_irq(info->pdev, i);
+ info->irq[i] = regmap_irq_get_virq(info->regmap_irqc, pirq);
+ if (info->irq[i] < 0) {
+ dev_warn(&info->pdev->dev,
+ "regmap_irq get virq failed for IRQ %d: %d\n",
+ pirq, info->irq[i]);
+ info->irq[i] = -1;
+ goto intr_failed;
+ }
+ ret = request_threaded_irq(info->irq[i],
+ NULL, fuel_gauge_thread_handler,
+ IRQF_ONESHOT, DEV_NAME, info);
+ if (ret) {
+ dev_warn(&info->pdev->dev,
+ "request irq failed for IRQ %d: %d\n",
+ pirq, info->irq[i]);
+ info->irq[i] = -1;
+ goto intr_failed;
+ } else {
+ dev_info(&info->pdev->dev, "HW IRQ %d -> VIRQ %d\n",
+ pirq, info->irq[i]);
+ }
+ }
+ return;
+
+intr_failed:
+ for (; i > 0; i--) {
+ free_irq(info->irq[i - 1], info);
+ info->irq[i - 1] = -1;
+ }
+}
+
+/*
+ * Some devices have no battery (HDMI sticks) and the axp288 battery's
+ * detection reports one despite it not being there.
+ * Please keep this listed sorted alphabetically.
+ */
+static const struct dmi_system_id axp288_fuel_gauge_blacklist[] = {
+ {
+ /* ACEPC T8 Cherry Trail Z8350 mini PC */
+ .matches = {
+ DMI_EXACT_MATCH(DMI_BOARD_VENDOR, "To be filled by O.E.M."),
+ DMI_EXACT_MATCH(DMI_BOARD_NAME, "Cherry Trail CR"),
+ DMI_EXACT_MATCH(DMI_PRODUCT_SKU, "T8"),
+ /* also match on somewhat unique bios-version */
+ DMI_EXACT_MATCH(DMI_BIOS_VERSION, "1.000"),
+ },
+ },
+ {
+ /* ACEPC T11 Cherry Trail Z8350 mini PC */
+ .matches = {
+ DMI_EXACT_MATCH(DMI_BOARD_VENDOR, "To be filled by O.E.M."),
+ DMI_EXACT_MATCH(DMI_BOARD_NAME, "Cherry Trail CR"),
+ DMI_EXACT_MATCH(DMI_PRODUCT_SKU, "T11"),
+ /* also match on somewhat unique bios-version */
+ DMI_EXACT_MATCH(DMI_BIOS_VERSION, "1.000"),
+ },
+ },
+ {
+ /* ECS EF20EA */
+ .matches = {
+ DMI_MATCH(DMI_PRODUCT_NAME, "EF20EA"),
+ },
+ },
+ {
+ /* Intel Cherry Trail Compute Stick, Windows version */
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Intel"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "STK1AW32SC"),
+ },
+ },
+ {
+ /* Intel Cherry Trail Compute Stick, version without an OS */
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Intel"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "STK1A32SC"),
+ },
+ },
+ {
+ /* Meegopad T02 */
+ .matches = {
+ DMI_MATCH(DMI_PRODUCT_NAME, "MEEGOPAD T02"),
+ },
+ },
+ {
+ /* Meegopad T08 */
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Default string"),
+ DMI_MATCH(DMI_BOARD_VENDOR, "To be filled by OEM."),
+ DMI_MATCH(DMI_BOARD_NAME, "T3 MRD"),
+ DMI_MATCH(DMI_BOARD_VERSION, "V1.1"),
+ },
+ },
+ {
+ /* Minix Neo Z83-4 mini PC */
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "MINIX"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Z83-4"),
+ }
+ },
+ {}
+};
+
+static int axp288_fuel_gauge_probe(struct platform_device *pdev)
+{
+ int i, ret = 0;
+ struct axp288_fg_info *info;
+ struct axp20x_dev *axp20x = dev_get_drvdata(pdev->dev.parent);
+ struct power_supply_config psy_cfg = {};
+ static const char * const iio_chan_name[] = {
+ [BAT_TEMP] = "axp288-batt-temp",
+ [PMIC_TEMP] = "axp288-pmic-temp",
+ [SYSTEM_TEMP] = "axp288-system-temp",
+ [BAT_CHRG_CURR] = "axp288-chrg-curr",
+ [BAT_D_CURR] = "axp288-chrg-d-curr",
+ [BAT_VOLT] = "axp288-batt-volt",
+ };
+ unsigned int val;
+
+ if (dmi_check_system(axp288_fuel_gauge_blacklist))
+ return -ENODEV;
+
+ /*
+ * On some devices the fuelgauge and charger parts of the axp288 are
+ * not used, check that the fuelgauge is enabled (CC_CTRL != 0).
+ */
+ ret = regmap_read(axp20x->regmap, AXP20X_CC_CTRL, &val);
+ if (ret < 0)
+ return ret;
+ if (val == 0)
+ return -ENODEV;
+
+ info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL);
+ if (!info)
+ return -ENOMEM;
+
+ info->pdev = pdev;
+ info->regmap = axp20x->regmap;
+ info->regmap_irqc = axp20x->regmap_irqc;
+ info->status = POWER_SUPPLY_STATUS_UNKNOWN;
+
+ platform_set_drvdata(pdev, info);
+
+ mutex_init(&info->lock);
+
+ for (i = 0; i < IIO_CHANNEL_NUM; i++) {
+ /*
+ * Note cannot use devm_iio_channel_get because x86 systems
+ * lack the device<->channel maps which iio_channel_get will
+ * try to use when passed a non NULL device pointer.
+ */
+ info->iio_channel[i] =
+ iio_channel_get(NULL, iio_chan_name[i]);
+ if (IS_ERR(info->iio_channel[i])) {
+ ret = PTR_ERR(info->iio_channel[i]);
+ dev_dbg(&pdev->dev, "error getting iiochan %s: %d\n",
+ iio_chan_name[i], ret);
+ /* Wait for axp288_adc to load */
+ if (ret == -ENODEV)
+ ret = -EPROBE_DEFER;
+
+ goto out_free_iio_chan;
+ }
+ }
+
+ ret = fuel_gauge_reg_readb(info, AXP288_FG_DES_CAP1_REG);
+ if (ret < 0)
+ goto out_free_iio_chan;
+
+ if (!(ret & FG_DES_CAP1_VALID)) {
+ dev_err(&pdev->dev, "axp288 not configured by firmware\n");
+ ret = -ENODEV;
+ goto out_free_iio_chan;
+ }
+
+ ret = fuel_gauge_reg_readb(info, AXP20X_CHRG_CTRL1);
+ if (ret < 0)
+ goto out_free_iio_chan;
+ switch ((ret & CHRG_CCCV_CV_MASK) >> CHRG_CCCV_CV_BIT_POS) {
+ case CHRG_CCCV_CV_4100MV:
+ info->max_volt = 4100;
+ break;
+ case CHRG_CCCV_CV_4150MV:
+ info->max_volt = 4150;
+ break;
+ case CHRG_CCCV_CV_4200MV:
+ info->max_volt = 4200;
+ break;
+ case CHRG_CCCV_CV_4350MV:
+ info->max_volt = 4350;
+ break;
+ }
+
+ psy_cfg.drv_data = info;
+ info->bat = power_supply_register(&pdev->dev, &fuel_gauge_desc, &psy_cfg);
+ if (IS_ERR(info->bat)) {
+ ret = PTR_ERR(info->bat);
+ dev_err(&pdev->dev, "failed to register battery: %d\n", ret);
+ goto out_free_iio_chan;
+ }
+
+ fuel_gauge_create_debugfs(info);
+ fuel_gauge_init_irq(info);
+
+ return 0;
+
+out_free_iio_chan:
+ for (i = 0; i < IIO_CHANNEL_NUM; i++)
+ if (!IS_ERR_OR_NULL(info->iio_channel[i]))
+ iio_channel_release(info->iio_channel[i]);
+
+ return ret;
+}
+
+static const struct platform_device_id axp288_fg_id_table[] = {
+ { .name = DEV_NAME },
+ {},
+};
+MODULE_DEVICE_TABLE(platform, axp288_fg_id_table);
+
+static int axp288_fuel_gauge_remove(struct platform_device *pdev)
+{
+ struct axp288_fg_info *info = platform_get_drvdata(pdev);
+ int i;
+
+ power_supply_unregister(info->bat);
+ fuel_gauge_remove_debugfs(info);
+
+ for (i = 0; i < AXP288_FG_INTR_NUM; i++)
+ if (info->irq[i] >= 0)
+ free_irq(info->irq[i], info);
+
+ for (i = 0; i < IIO_CHANNEL_NUM; i++)
+ iio_channel_release(info->iio_channel[i]);
+
+ return 0;
+}
+
+static struct platform_driver axp288_fuel_gauge_driver = {
+ .probe = axp288_fuel_gauge_probe,
+ .remove = axp288_fuel_gauge_remove,
+ .id_table = axp288_fg_id_table,
+ .driver = {
+ .name = DEV_NAME,
+ },
+};
+
+module_platform_driver(axp288_fuel_gauge_driver);
+
+MODULE_AUTHOR("Ramakrishna Pallala <ramakrishna.pallala@intel.com>");
+MODULE_AUTHOR("Todd Brandt <todd.e.brandt@linux.intel.com>");
+MODULE_DESCRIPTION("Xpower AXP288 Fuel Gauge Driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/power/supply/bd70528-charger.c b/drivers/power/supply/bd70528-charger.c
new file mode 100644
index 000000000..7c1f0b99c
--- /dev/null
+++ b/drivers/power/supply/bd70528-charger.c
@@ -0,0 +1,710 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+//
+// Copyright (C) 2018 ROHM Semiconductors
+//
+// power-supply driver for ROHM BD70528 PMIC
+
+/*
+ * BD70528 charger HW state machine.
+ *
+ * The thermal shutdown state is not drawn. From any other state but
+ * battery error and suspend it is possible to go to TSD/TMP states
+ * if temperature is out of bounds.
+ *
+ * CHG_RST = H
+ * or CHG_EN=L
+ * or (DCIN2_UVLO=L && DCIN1_UVLO=L)
+ * or (DCIN2_OVLO=H & DCIN1_UVKLO=L)
+ *
+ * +--------------+ +--------------+
+ * | | | |
+ * | Any state +-------> | Suspend |
+ * | | | |
+ * +--------------+ +------+-------+
+ * |
+ * CHG_EN = H && BAT_DET = H && |
+ * No errors (temp, bat_ov, UVLO, |
+ * OVLO...) |
+ * |
+ * BAT_OV or +---------v----------+
+ * (DBAT && TTRI) | |
+ * +-----------------+ Trickle Charge | <---------------+
+ * | | | |
+ * | +-------+------------+ |
+ * | | |
+ * | | ^ |
+ * | V_BAT > VTRI_TH | | VBAT < VTRI_TH - 50mV |
+ * | | | |
+ * | v | |
+ * | | |
+ * | BAT_OV or +----------+----+ |
+ * | (DBAT && TFST) | | |
+ * | +----------------+ Fast Charge | |
+ * | | | | |
+ * v v +----+----------+ |
+ * | |
+ *+----------------+ ILIM_DET=L | ^ ILIM_DET |
+ *| | & CV_DET=H | | or CV_DET=L |
+ *| Battery Error | & VBAT > | | or VBAT < VRECHG_TH |
+ *| | VRECHG_TH | | or IBAT > IFST/x |
+ *+----------------+ & IBAT < | | |
+ * IFST/x v | |
+ * ^ | |
+ * | +---------+-+ |
+ * | | | |
+ * +-------------------+ Top OFF | |
+ * BAT_OV = H or | | |
+ * (DBAT && TFST) +-----+-----+ |
+ * | |
+ * Stay top-off for 15s | |
+ * v |
+ * |
+ * +--------+ |
+ * | | |
+ * | Done +-------------------------+
+ * | |
+ * +--------+ VBAT < VRECHG_TH
+ */
+
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/mfd/rohm-bd70528.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/power_supply.h>
+#include <linux/linear_range.h>
+
+#define CHG_STAT_SUSPEND 0x0
+#define CHG_STAT_TRICKLE 0x1
+#define CHG_STAT_FAST 0x3
+#define CHG_STAT_TOPOFF 0xe
+#define CHG_STAT_DONE 0xf
+#define CHG_STAT_OTP_TRICKLE 0x10
+#define CHG_STAT_OTP_FAST 0x11
+#define CHG_STAT_OTP_DONE 0x12
+#define CHG_STAT_TSD_TRICKLE 0x20
+#define CHG_STAT_TSD_FAST 0x21
+#define CHG_STAT_TSD_TOPOFF 0x22
+#define CHG_STAT_BAT_ERR 0x7f
+
+static const char *bd70528_charger_model = "BD70528";
+static const char *bd70528_charger_manufacturer = "ROHM Semiconductors";
+
+#define BD_ERR_IRQ_HND(_name_, _wrn_) \
+static irqreturn_t bd0528_##_name_##_interrupt(int irq, void *arg) \
+{ \
+ struct power_supply *psy = (struct power_supply *)arg; \
+ \
+ power_supply_changed(psy); \
+ dev_err(&psy->dev, (_wrn_)); \
+ \
+ return IRQ_HANDLED; \
+}
+
+#define BD_INFO_IRQ_HND(_name_, _wrn_) \
+static irqreturn_t bd0528_##_name_##_interrupt(int irq, void *arg) \
+{ \
+ struct power_supply *psy = (struct power_supply *)arg; \
+ \
+ power_supply_changed(psy); \
+ dev_dbg(&psy->dev, (_wrn_)); \
+ \
+ return IRQ_HANDLED; \
+}
+
+#define BD_IRQ_HND(_name_) bd0528_##_name_##_interrupt
+
+struct bd70528_psy {
+ struct regmap *regmap;
+ struct device *dev;
+ struct power_supply *psy;
+};
+
+BD_ERR_IRQ_HND(BAT_OV_DET, "Battery overvoltage detected\n");
+BD_ERR_IRQ_HND(DBAT_DET, "Dead battery detected\n");
+BD_ERR_IRQ_HND(COLD_DET, "Battery cold\n");
+BD_ERR_IRQ_HND(HOT_DET, "Battery hot\n");
+BD_ERR_IRQ_HND(CHG_TSD, "Charger thermal shutdown\n");
+BD_ERR_IRQ_HND(DCIN2_OV_DET, "DCIN2 overvoltage detected\n");
+
+BD_INFO_IRQ_HND(BAT_OV_RES, "Battery voltage back to normal\n");
+BD_INFO_IRQ_HND(COLD_RES, "Battery temperature back to normal\n");
+BD_INFO_IRQ_HND(HOT_RES, "Battery temperature back to normal\n");
+BD_INFO_IRQ_HND(BAT_RMV, "Battery removed\n");
+BD_INFO_IRQ_HND(BAT_DET, "Battery detected\n");
+BD_INFO_IRQ_HND(DCIN2_OV_RES, "DCIN2 voltage back to normal\n");
+BD_INFO_IRQ_HND(DCIN2_RMV, "DCIN2 removed\n");
+BD_INFO_IRQ_HND(DCIN2_DET, "DCIN2 detected\n");
+BD_INFO_IRQ_HND(DCIN1_RMV, "DCIN1 removed\n");
+BD_INFO_IRQ_HND(DCIN1_DET, "DCIN1 detected\n");
+
+struct irq_name_pair {
+ const char *n;
+ irqreturn_t (*h)(int irq, void *arg);
+};
+
+static int bd70528_get_irqs(struct platform_device *pdev,
+ struct bd70528_psy *bdpsy)
+{
+ int irq, i, ret;
+ unsigned int mask;
+ static const struct irq_name_pair bd70528_chg_irqs[] = {
+ { .n = "bd70528-bat-ov-res", .h = BD_IRQ_HND(BAT_OV_RES) },
+ { .n = "bd70528-bat-ov-det", .h = BD_IRQ_HND(BAT_OV_DET) },
+ { .n = "bd70528-bat-dead", .h = BD_IRQ_HND(DBAT_DET) },
+ { .n = "bd70528-bat-warmed", .h = BD_IRQ_HND(COLD_RES) },
+ { .n = "bd70528-bat-cold", .h = BD_IRQ_HND(COLD_DET) },
+ { .n = "bd70528-bat-cooled", .h = BD_IRQ_HND(HOT_RES) },
+ { .n = "bd70528-bat-hot", .h = BD_IRQ_HND(HOT_DET) },
+ { .n = "bd70528-chg-tshd", .h = BD_IRQ_HND(CHG_TSD) },
+ { .n = "bd70528-bat-removed", .h = BD_IRQ_HND(BAT_RMV) },
+ { .n = "bd70528-bat-detected", .h = BD_IRQ_HND(BAT_DET) },
+ { .n = "bd70528-dcin2-ov-res", .h = BD_IRQ_HND(DCIN2_OV_RES) },
+ { .n = "bd70528-dcin2-ov-det", .h = BD_IRQ_HND(DCIN2_OV_DET) },
+ { .n = "bd70528-dcin2-removed", .h = BD_IRQ_HND(DCIN2_RMV) },
+ { .n = "bd70528-dcin2-detected", .h = BD_IRQ_HND(DCIN2_DET) },
+ { .n = "bd70528-dcin1-removed", .h = BD_IRQ_HND(DCIN1_RMV) },
+ { .n = "bd70528-dcin1-detected", .h = BD_IRQ_HND(DCIN1_DET) },
+ };
+
+ for (i = 0; i < ARRAY_SIZE(bd70528_chg_irqs); i++) {
+ irq = platform_get_irq_byname(pdev, bd70528_chg_irqs[i].n);
+ if (irq < 0) {
+ dev_err(&pdev->dev, "Bad IRQ information for %s (%d)\n",
+ bd70528_chg_irqs[i].n, irq);
+ return irq;
+ }
+ ret = devm_request_threaded_irq(&pdev->dev, irq, NULL,
+ bd70528_chg_irqs[i].h,
+ IRQF_ONESHOT,
+ bd70528_chg_irqs[i].n,
+ bdpsy->psy);
+
+ if (ret)
+ return ret;
+ }
+ /*
+ * BD70528 irq controller is not touching the main mask register.
+ * So enable the charger block interrupts at main level. We can just
+ * leave them enabled as irq-controller should disable irqs
+ * from sub-registers when IRQ is disabled or freed.
+ */
+ mask = BD70528_REG_INT_BAT1_MASK | BD70528_REG_INT_BAT2_MASK;
+ ret = regmap_update_bits(bdpsy->regmap,
+ BD70528_REG_INT_MAIN_MASK, mask, 0);
+ if (ret)
+ dev_err(&pdev->dev, "Failed to enable charger IRQs\n");
+
+ return ret;
+}
+
+static int bd70528_get_charger_status(struct bd70528_psy *bdpsy, int *val)
+{
+ int ret;
+ unsigned int v;
+
+ ret = regmap_read(bdpsy->regmap, BD70528_REG_CHG_CURR_STAT, &v);
+ if (ret) {
+ dev_err(bdpsy->dev, "Charger state read failure %d\n",
+ ret);
+ return ret;
+ }
+
+ switch (v & BD70528_MASK_CHG_STAT) {
+ case CHG_STAT_SUSPEND:
+ /* Maybe we should check the CHG_TTRI_EN? */
+ case CHG_STAT_OTP_TRICKLE:
+ case CHG_STAT_OTP_FAST:
+ case CHG_STAT_OTP_DONE:
+ case CHG_STAT_TSD_TRICKLE:
+ case CHG_STAT_TSD_FAST:
+ case CHG_STAT_TSD_TOPOFF:
+ case CHG_STAT_BAT_ERR:
+ *val = POWER_SUPPLY_STATUS_NOT_CHARGING;
+ break;
+ case CHG_STAT_DONE:
+ *val = POWER_SUPPLY_STATUS_FULL;
+ break;
+ case CHG_STAT_TRICKLE:
+ case CHG_STAT_FAST:
+ case CHG_STAT_TOPOFF:
+ *val = POWER_SUPPLY_STATUS_CHARGING;
+ break;
+ default:
+ *val = POWER_SUPPLY_STATUS_UNKNOWN;
+ break;
+ }
+
+ return 0;
+}
+
+static int bd70528_get_charge_type(struct bd70528_psy *bdpsy, int *val)
+{
+ int ret;
+ unsigned int v;
+
+ ret = regmap_read(bdpsy->regmap, BD70528_REG_CHG_CURR_STAT, &v);
+ if (ret) {
+ dev_err(bdpsy->dev, "Charger state read failure %d\n",
+ ret);
+ return ret;
+ }
+
+ switch (v & BD70528_MASK_CHG_STAT) {
+ case CHG_STAT_TRICKLE:
+ *val = POWER_SUPPLY_CHARGE_TYPE_TRICKLE;
+ break;
+ case CHG_STAT_FAST:
+ case CHG_STAT_TOPOFF:
+ *val = POWER_SUPPLY_CHARGE_TYPE_FAST;
+ break;
+ case CHG_STAT_DONE:
+ case CHG_STAT_SUSPEND:
+ /* Maybe we should check the CHG_TTRI_EN? */
+ case CHG_STAT_OTP_TRICKLE:
+ case CHG_STAT_OTP_FAST:
+ case CHG_STAT_OTP_DONE:
+ case CHG_STAT_TSD_TRICKLE:
+ case CHG_STAT_TSD_FAST:
+ case CHG_STAT_TSD_TOPOFF:
+ case CHG_STAT_BAT_ERR:
+ *val = POWER_SUPPLY_CHARGE_TYPE_NONE;
+ break;
+ default:
+ *val = POWER_SUPPLY_CHARGE_TYPE_UNKNOWN;
+ break;
+ }
+
+ return 0;
+}
+
+static int bd70528_get_battery_health(struct bd70528_psy *bdpsy, int *val)
+{
+ int ret;
+ unsigned int v;
+
+ ret = regmap_read(bdpsy->regmap, BD70528_REG_CHG_BAT_STAT, &v);
+ if (ret) {
+ dev_err(bdpsy->dev, "Battery state read failure %d\n",
+ ret);
+ return ret;
+ }
+ /* No battery? */
+ if (!(v & BD70528_MASK_CHG_BAT_DETECT))
+ *val = POWER_SUPPLY_HEALTH_DEAD;
+ else if (v & BD70528_MASK_CHG_BAT_OVERVOLT)
+ *val = POWER_SUPPLY_HEALTH_OVERVOLTAGE;
+ else if (v & BD70528_MASK_CHG_BAT_TIMER)
+ *val = POWER_SUPPLY_HEALTH_SAFETY_TIMER_EXPIRE;
+ else
+ *val = POWER_SUPPLY_HEALTH_GOOD;
+
+ return 0;
+}
+
+static int bd70528_get_online(struct bd70528_psy *bdpsy, int *val)
+{
+ int ret;
+ unsigned int v;
+
+ ret = regmap_read(bdpsy->regmap, BD70528_REG_CHG_IN_STAT, &v);
+ if (ret) {
+ dev_err(bdpsy->dev, "DC1 IN state read failure %d\n",
+ ret);
+ return ret;
+ }
+
+ *val = (v & BD70528_MASK_CHG_DCIN1_UVLO) ? 1 : 0;
+
+ return 0;
+}
+
+static int bd70528_get_present(struct bd70528_psy *bdpsy, int *val)
+{
+ int ret;
+ unsigned int v;
+
+ ret = regmap_read(bdpsy->regmap, BD70528_REG_CHG_BAT_STAT, &v);
+ if (ret) {
+ dev_err(bdpsy->dev, "Battery state read failure %d\n",
+ ret);
+ return ret;
+ }
+
+ *val = (v & BD70528_MASK_CHG_BAT_DETECT) ? 1 : 0;
+
+ return 0;
+}
+
+static const struct linear_range current_limit_ranges[] = {
+ {
+ .min = 5,
+ .step = 1,
+ .min_sel = 0,
+ .max_sel = 0x22,
+ },
+ {
+ .min = 40,
+ .step = 5,
+ .min_sel = 0x23,
+ .max_sel = 0x26,
+ },
+ {
+ .min = 60,
+ .step = 20,
+ .min_sel = 0x27,
+ .max_sel = 0x2d,
+ },
+ {
+ .min = 200,
+ .step = 50,
+ .min_sel = 0x2e,
+ .max_sel = 0x34,
+ },
+ {
+ .min = 500,
+ .step = 0,
+ .min_sel = 0x35,
+ .max_sel = 0x3f,
+ },
+};
+
+/*
+ * BD70528 would support setting and getting own charge current/
+ * voltage for low temperatures. The driver currently only reads
+ * the charge current at room temperature. We do set both though.
+ */
+static const struct linear_range warm_charge_curr[] = {
+ {
+ .min = 10,
+ .step = 10,
+ .min_sel = 0,
+ .max_sel = 0x12,
+ },
+ {
+ .min = 200,
+ .step = 25,
+ .min_sel = 0x13,
+ .max_sel = 0x1f,
+ },
+};
+
+/*
+ * Cold charge current selectors are identical to warm charge current
+ * selectors. The difference is that only smaller currents are available
+ * at cold charge range.
+ */
+#define MAX_COLD_CHG_CURR_SEL 0x15
+#define MAX_WARM_CHG_CURR_SEL 0x1f
+#define MIN_CHG_CURR_SEL 0x0
+
+static int get_charge_current(struct bd70528_psy *bdpsy, int *ma)
+{
+ unsigned int sel;
+ int ret;
+
+ ret = regmap_read(bdpsy->regmap, BD70528_REG_CHG_CHG_CURR_WARM,
+ &sel);
+ if (ret) {
+ dev_err(bdpsy->dev,
+ "Charge current reading failed (%d)\n", ret);
+ return ret;
+ }
+
+ sel &= BD70528_MASK_CHG_CHG_CURR;
+
+ ret = linear_range_get_value_array(&warm_charge_curr[0],
+ ARRAY_SIZE(warm_charge_curr),
+ sel, ma);
+ if (ret) {
+ dev_err(bdpsy->dev,
+ "Unknown charge current value 0x%x\n",
+ sel);
+ }
+
+ return ret;
+}
+
+static int get_current_limit(struct bd70528_psy *bdpsy, int *ma)
+{
+ unsigned int sel;
+ int ret;
+
+ ret = regmap_read(bdpsy->regmap, BD70528_REG_CHG_DCIN_ILIM,
+ &sel);
+
+ if (ret) {
+ dev_err(bdpsy->dev,
+ "Input current limit reading failed (%d)\n", ret);
+ return ret;
+ }
+
+ sel &= BD70528_MASK_CHG_DCIN_ILIM;
+
+ ret = linear_range_get_value_array(&current_limit_ranges[0],
+ ARRAY_SIZE(current_limit_ranges),
+ sel, ma);
+ if (ret) {
+ /* Unspecified values mean 500 mA */
+ *ma = 500;
+ }
+ return 0;
+}
+
+static enum power_supply_property bd70528_charger_props[] = {
+ POWER_SUPPLY_PROP_STATUS,
+ POWER_SUPPLY_PROP_CHARGE_TYPE,
+ POWER_SUPPLY_PROP_HEALTH,
+ POWER_SUPPLY_PROP_PRESENT,
+ POWER_SUPPLY_PROP_ONLINE,
+ POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT,
+ POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT,
+ POWER_SUPPLY_PROP_MODEL_NAME,
+ POWER_SUPPLY_PROP_MANUFACTURER,
+};
+
+static int bd70528_charger_get_property(struct power_supply *psy,
+ enum power_supply_property psp,
+ union power_supply_propval *val)
+{
+ struct bd70528_psy *bdpsy = power_supply_get_drvdata(psy);
+ int ret = 0;
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_STATUS:
+ return bd70528_get_charger_status(bdpsy, &val->intval);
+ case POWER_SUPPLY_PROP_CHARGE_TYPE:
+ return bd70528_get_charge_type(bdpsy, &val->intval);
+ case POWER_SUPPLY_PROP_HEALTH:
+ return bd70528_get_battery_health(bdpsy, &val->intval);
+ case POWER_SUPPLY_PROP_PRESENT:
+ return bd70528_get_present(bdpsy, &val->intval);
+ case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT:
+ ret = get_current_limit(bdpsy, &val->intval);
+ val->intval *= 1000;
+ return ret;
+ case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT:
+ ret = get_charge_current(bdpsy, &val->intval);
+ val->intval *= 1000;
+ return ret;
+ case POWER_SUPPLY_PROP_ONLINE:
+ return bd70528_get_online(bdpsy, &val->intval);
+ case POWER_SUPPLY_PROP_MODEL_NAME:
+ val->strval = bd70528_charger_model;
+ return 0;
+ case POWER_SUPPLY_PROP_MANUFACTURER:
+ val->strval = bd70528_charger_manufacturer;
+ return 0;
+ default:
+ break;
+ }
+
+ return -EINVAL;
+}
+
+static int bd70528_prop_is_writable(struct power_supply *psy,
+ enum power_supply_property psp)
+{
+ switch (psp) {
+ case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT:
+ case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT:
+ return 1;
+ default:
+ break;
+ }
+ return 0;
+}
+
+static int set_charge_current(struct bd70528_psy *bdpsy, int ma)
+{
+ unsigned int reg;
+ int ret = 0, tmpret;
+ bool found;
+
+ if (ma > 500) {
+ dev_warn(bdpsy->dev,
+ "Requested charge current %u exceed maximum (500mA)\n",
+ ma);
+ reg = MAX_WARM_CHG_CURR_SEL;
+ goto set;
+ }
+ if (ma < 10) {
+ dev_err(bdpsy->dev,
+ "Requested charge current %u smaller than min (10mA)\n",
+ ma);
+ reg = MIN_CHG_CURR_SEL;
+ ret = -EINVAL;
+ goto set;
+ }
+
+/*
+ * For BD70528 voltage/current limits we happily accept any value which
+ * belongs the range. We could check if value matching the selector is
+ * desired by computing the range min + (sel - sel_low) * range step - but
+ * I guess it is enough if we use voltage/current which is closest (below)
+ * the requested?
+ */
+
+ ret = linear_range_get_selector_low_array(warm_charge_curr,
+ ARRAY_SIZE(warm_charge_curr),
+ ma, &reg, &found);
+ if (ret) {
+ dev_err(bdpsy->dev,
+ "Unsupported charge current %u mA\n", ma);
+ reg = MIN_CHG_CURR_SEL;
+ goto set;
+ }
+ if (!found) {
+ /*
+ * There was a gap in supported values and we hit it.
+ * Yet a smaller value was found so we use it.
+ */
+ dev_warn(bdpsy->dev,
+ "Unsupported charge current %u mA\n", ma);
+ }
+set:
+
+ tmpret = regmap_update_bits(bdpsy->regmap,
+ BD70528_REG_CHG_CHG_CURR_WARM,
+ BD70528_MASK_CHG_CHG_CURR, reg);
+ if (tmpret)
+ dev_err(bdpsy->dev,
+ "Charge current write failure (%d)\n", tmpret);
+
+ if (reg > MAX_COLD_CHG_CURR_SEL)
+ reg = MAX_COLD_CHG_CURR_SEL;
+
+ if (!tmpret)
+ tmpret = regmap_update_bits(bdpsy->regmap,
+ BD70528_REG_CHG_CHG_CURR_COLD,
+ BD70528_MASK_CHG_CHG_CURR, reg);
+
+ if (!ret)
+ ret = tmpret;
+
+ return ret;
+}
+
+#define MAX_CURR_LIMIT_SEL 0x34
+#define MIN_CURR_LIMIT_SEL 0x0
+
+static int set_current_limit(struct bd70528_psy *bdpsy, int ma)
+{
+ unsigned int reg;
+ int ret = 0, tmpret;
+ bool found;
+
+ if (ma > 500) {
+ dev_warn(bdpsy->dev,
+ "Requested current limit %u exceed maximum (500mA)\n",
+ ma);
+ reg = MAX_CURR_LIMIT_SEL;
+ goto set;
+ }
+ if (ma < 5) {
+ dev_err(bdpsy->dev,
+ "Requested current limit %u smaller than min (5mA)\n",
+ ma);
+ reg = MIN_CURR_LIMIT_SEL;
+ ret = -EINVAL;
+ goto set;
+ }
+
+ ret = linear_range_get_selector_low_array(current_limit_ranges,
+ ARRAY_SIZE(current_limit_ranges),
+ ma, &reg, &found);
+ if (ret) {
+ dev_err(bdpsy->dev, "Unsupported current limit %umA\n", ma);
+ reg = MIN_CURR_LIMIT_SEL;
+ goto set;
+ }
+ if (!found) {
+ /*
+ * There was a gap in supported values and we hit it.
+ * We found a smaller value from ranges and use it.
+ * Warn user though.
+ */
+ dev_warn(bdpsy->dev, "Unsupported current limit %umA\n", ma);
+ }
+
+set:
+ tmpret = regmap_update_bits(bdpsy->regmap,
+ BD70528_REG_CHG_DCIN_ILIM,
+ BD70528_MASK_CHG_DCIN_ILIM, reg);
+
+ if (!ret)
+ ret = tmpret;
+
+ return ret;
+}
+
+static int bd70528_charger_set_property(struct power_supply *psy,
+ enum power_supply_property psp,
+ const union power_supply_propval *val)
+{
+ struct bd70528_psy *bdpsy = power_supply_get_drvdata(psy);
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT:
+ return set_current_limit(bdpsy, val->intval / 1000);
+ case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT:
+ return set_charge_current(bdpsy, val->intval / 1000);
+ default:
+ break;
+ }
+ return -EINVAL;
+}
+
+static const struct power_supply_desc bd70528_charger_desc = {
+ .name = "bd70528-charger",
+ .type = POWER_SUPPLY_TYPE_MAINS,
+ .properties = bd70528_charger_props,
+ .num_properties = ARRAY_SIZE(bd70528_charger_props),
+ .get_property = bd70528_charger_get_property,
+ .set_property = bd70528_charger_set_property,
+ .property_is_writeable = bd70528_prop_is_writable,
+};
+
+static int bd70528_power_probe(struct platform_device *pdev)
+{
+ struct bd70528_psy *bdpsy;
+ struct power_supply_config cfg = {};
+
+ bdpsy = devm_kzalloc(&pdev->dev, sizeof(*bdpsy), GFP_KERNEL);
+ if (!bdpsy)
+ return -ENOMEM;
+
+ bdpsy->regmap = dev_get_regmap(pdev->dev.parent, NULL);
+ if (!bdpsy->regmap) {
+ dev_err(&pdev->dev, "No regmap found for chip\n");
+ return -EINVAL;
+ }
+ bdpsy->dev = &pdev->dev;
+
+ platform_set_drvdata(pdev, bdpsy);
+ cfg.drv_data = bdpsy;
+ cfg.of_node = pdev->dev.parent->of_node;
+
+ bdpsy->psy = devm_power_supply_register(&pdev->dev,
+ &bd70528_charger_desc, &cfg);
+ if (IS_ERR(bdpsy->psy)) {
+ dev_err(&pdev->dev, "failed: power supply register\n");
+ return PTR_ERR(bdpsy->psy);
+ }
+
+ return bd70528_get_irqs(pdev, bdpsy);
+}
+
+static struct platform_driver bd70528_power = {
+ .driver = {
+ .name = "bd70528-power"
+ },
+ .probe = bd70528_power_probe,
+};
+
+module_platform_driver(bd70528_power);
+
+MODULE_AUTHOR("Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>");
+MODULE_DESCRIPTION("BD70528 power-supply driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:bd70528-power");
diff --git a/drivers/power/supply/bd99954-charger.c b/drivers/power/supply/bd99954-charger.c
new file mode 100644
index 000000000..ffd8bfa08
--- /dev/null
+++ b/drivers/power/supply/bd99954-charger.c
@@ -0,0 +1,1142 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * ROHM BD99954 charger driver
+ *
+ * Copyright (C) 2020 Rohm Semiconductors
+ * Originally written by:
+ * Mikko Mutanen <mikko.mutanen@fi.rohmeurope.com>
+ * Markus Laine <markus.laine@fi.rohmeurope.com>
+ * Bugs added by:
+ * Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
+ */
+
+/*
+ * The battery charging profile of BD99954.
+ *
+ * Curve (1) represents charging current.
+ * Curve (2) represents battery voltage.
+ *
+ * The BD99954 data sheet divides charging to three phases.
+ * a) Trickle-charge with constant current (8).
+ * b) pre-charge with constant current (6)
+ * c) fast-charge, first with constant current (5) phase. After
+ * the battery voltage has reached target level (4) we have constant
+ * voltage phase until charging current has dropped to termination
+ * level (7)
+ *
+ * V ^ ^ I
+ * . .
+ * . .
+ *(4)` `.` ` ` ` ` ` ` ` ` ` ` ` ` ` ----------------------------.
+ * . :/ .
+ * . o----+/:/ ` ` ` ` ` ` ` ` ` ` ` ` `.` ` (5)
+ * . + :: + .
+ * . + /- -- .
+ * . +`/- + .
+ * . o/- -: .
+ * . .s. +` .
+ * . .--+ `/ .
+ * . ..`` + .: .
+ * . -` + -- .
+ * . (2) ...`` + :- .
+ * . ...`` + -: .
+ *(3)` `.`."" ` ` ` `+-------- ` ` ` ` ` ` `.:` ` ` ` ` ` ` ` ` .` ` (6)
+ * . + `:. .
+ * . + -: .
+ * . + -:. .
+ * . + .--. .
+ * . (1) + `.+` ` ` `.` ` (7)
+ * -..............` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` + ` ` ` .` ` (8)
+ * . + -
+ * -------------------------------------------------+++++++++-->
+ * | trickle | pre | fast |
+ *
+ * Details of DT properties for different limits can be found from BD99954
+ * device tree binding documentation.
+ */
+
+#include <linux/delay.h>
+#include <linux/gpio/consumer.h>
+#include <linux/interrupt.h>
+#include <linux/i2c.h>
+#include <linux/kernel.h>
+#include <linux/linear_range.h>
+#include <linux/module.h>
+#include <linux/mod_devicetable.h>
+#include <linux/power_supply.h>
+#include <linux/property.h>
+#include <linux/regmap.h>
+#include <linux/types.h>
+
+#include "bd99954-charger.h"
+
+struct battery_data {
+ u16 precharge_current; /* Trickle-charge Current */
+ u16 fc_reg_voltage; /* Fast Charging Regulation Voltage */
+ u16 voltage_min;
+ u16 voltage_max;
+};
+
+/* Initial field values, converted to initial register values */
+struct bd9995x_init_data {
+ u16 vsysreg_set; /* VSYS Regulation Setting */
+ u16 ibus_lim_set; /* VBUS input current limitation */
+ u16 icc_lim_set; /* VCC/VACP Input Current Limit Setting */
+ u16 itrich_set; /* Trickle-charge Current Setting */
+ u16 iprech_set; /* Pre-Charge Current Setting */
+ u16 ichg_set; /* Fast-Charge constant current */
+ u16 vfastchg_reg_set1; /* Fast Charging Regulation Voltage */
+ u16 vprechg_th_set; /* Pre-charge Voltage Threshold Setting */
+ u16 vrechg_set; /* Re-charge Battery Voltage Setting */
+ u16 vbatovp_set; /* Battery Over Voltage Threshold Setting */
+ u16 iterm_set; /* Charging termination current */
+};
+
+struct bd9995x_state {
+ u8 online;
+ u16 chgstm_status;
+ u16 vbat_vsys_status;
+ u16 vbus_vcc_status;
+};
+
+struct bd9995x_device {
+ struct i2c_client *client;
+ struct device *dev;
+ struct power_supply *charger;
+
+ struct regmap *rmap;
+ struct regmap_field *rmap_fields[F_MAX_FIELDS];
+
+ int chip_id;
+ int chip_rev;
+ struct bd9995x_init_data init_data;
+ struct bd9995x_state state;
+
+ struct mutex lock; /* Protect state data */
+};
+
+static const struct regmap_range bd9995x_readonly_reg_ranges[] = {
+ regmap_reg_range(CHGSTM_STATUS, SEL_ILIM_VAL),
+ regmap_reg_range(IOUT_DACIN_VAL, IOUT_DACIN_VAL),
+ regmap_reg_range(VCC_UCD_STATUS, VCC_IDD_STATUS),
+ regmap_reg_range(VBUS_UCD_STATUS, VBUS_IDD_STATUS),
+ regmap_reg_range(CHIP_ID, CHIP_REV),
+ regmap_reg_range(SYSTEM_STATUS, SYSTEM_STATUS),
+ regmap_reg_range(IBATP_VAL, VBAT_AVE_VAL),
+ regmap_reg_range(VTH_VAL, EXTIADP_AVE_VAL),
+};
+
+static const struct regmap_access_table bd9995x_writeable_regs = {
+ .no_ranges = bd9995x_readonly_reg_ranges,
+ .n_no_ranges = ARRAY_SIZE(bd9995x_readonly_reg_ranges),
+};
+
+static const struct regmap_range bd9995x_volatile_reg_ranges[] = {
+ regmap_reg_range(CHGSTM_STATUS, WDT_STATUS),
+ regmap_reg_range(VCC_UCD_STATUS, VCC_IDD_STATUS),
+ regmap_reg_range(VBUS_UCD_STATUS, VBUS_IDD_STATUS),
+ regmap_reg_range(INT0_STATUS, INT7_STATUS),
+ regmap_reg_range(SYSTEM_STATUS, SYSTEM_CTRL_SET),
+ regmap_reg_range(IBATP_VAL, EXTIADP_AVE_VAL), /* Measurement regs */
+};
+
+static const struct regmap_access_table bd9995x_volatile_regs = {
+ .yes_ranges = bd9995x_volatile_reg_ranges,
+ .n_yes_ranges = ARRAY_SIZE(bd9995x_volatile_reg_ranges),
+};
+
+static const struct regmap_range_cfg regmap_range_cfg[] = {
+ {
+ .selector_reg = MAP_SET,
+ .selector_mask = 0xFFFF,
+ .selector_shift = 0,
+ .window_start = 0,
+ .window_len = 0x100,
+ .range_min = 0 * 0x100,
+ .range_max = 3 * 0x100,
+ },
+};
+
+static const struct regmap_config bd9995x_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 16,
+ .reg_stride = 1,
+
+ .max_register = 3 * 0x100,
+ .cache_type = REGCACHE_RBTREE,
+
+ .ranges = regmap_range_cfg,
+ .num_ranges = ARRAY_SIZE(regmap_range_cfg),
+ .val_format_endian = REGMAP_ENDIAN_LITTLE,
+ .wr_table = &bd9995x_writeable_regs,
+ .volatile_table = &bd9995x_volatile_regs,
+};
+
+enum bd9995x_chrg_fault {
+ CHRG_FAULT_NORMAL,
+ CHRG_FAULT_INPUT,
+ CHRG_FAULT_THERMAL_SHUTDOWN,
+ CHRG_FAULT_TIMER_EXPIRED,
+};
+
+static int bd9995x_get_prop_batt_health(struct bd9995x_device *bd)
+{
+ int ret, tmp;
+
+ ret = regmap_field_read(bd->rmap_fields[F_BATTEMP], &tmp);
+ if (ret)
+ return POWER_SUPPLY_HEALTH_UNKNOWN;
+
+ /* TODO: Check these against datasheet page 34 */
+
+ switch (tmp) {
+ case ROOM:
+ return POWER_SUPPLY_HEALTH_GOOD;
+ case HOT1:
+ case HOT2:
+ case HOT3:
+ return POWER_SUPPLY_HEALTH_OVERHEAT;
+ case COLD1:
+ case COLD2:
+ return POWER_SUPPLY_HEALTH_COLD;
+ case TEMP_DIS:
+ case BATT_OPEN:
+ default:
+ return POWER_SUPPLY_HEALTH_UNKNOWN;
+ }
+}
+
+static int bd9995x_get_prop_charge_type(struct bd9995x_device *bd)
+{
+ int ret, tmp;
+
+ ret = regmap_field_read(bd->rmap_fields[F_CHGSTM_STATE], &tmp);
+ if (ret)
+ return POWER_SUPPLY_CHARGE_TYPE_UNKNOWN;
+
+ switch (tmp) {
+ case CHGSTM_TRICKLE_CHARGE:
+ case CHGSTM_PRE_CHARGE:
+ return POWER_SUPPLY_CHARGE_TYPE_TRICKLE;
+ case CHGSTM_FAST_CHARGE:
+ return POWER_SUPPLY_CHARGE_TYPE_FAST;
+ case CHGSTM_TOP_OFF:
+ case CHGSTM_DONE:
+ case CHGSTM_SUSPEND:
+ return POWER_SUPPLY_CHARGE_TYPE_NONE;
+ default: /* Rest of the states are error related, no charging */
+ return POWER_SUPPLY_CHARGE_TYPE_NONE;
+ }
+}
+
+static bool bd9995x_get_prop_batt_present(struct bd9995x_device *bd)
+{
+ int ret, tmp;
+
+ ret = regmap_field_read(bd->rmap_fields[F_BATTEMP], &tmp);
+ if (ret)
+ return false;
+
+ return tmp != BATT_OPEN;
+}
+
+static int bd9995x_get_prop_batt_voltage(struct bd9995x_device *bd)
+{
+ int ret, tmp;
+
+ ret = regmap_field_read(bd->rmap_fields[F_VBAT_VAL], &tmp);
+ if (ret)
+ return 0;
+
+ tmp = min(tmp, 19200);
+
+ return tmp * 1000;
+}
+
+static int bd9995x_get_prop_batt_current(struct bd9995x_device *bd)
+{
+ int ret, tmp;
+
+ ret = regmap_field_read(bd->rmap_fields[F_IBATP_VAL], &tmp);
+ if (ret)
+ return 0;
+
+ return tmp * 1000;
+}
+
+#define DEFAULT_BATTERY_TEMPERATURE 250
+
+static int bd9995x_get_prop_batt_temp(struct bd9995x_device *bd)
+{
+ int ret, tmp;
+
+ ret = regmap_field_read(bd->rmap_fields[F_THERM_VAL], &tmp);
+ if (ret)
+ return DEFAULT_BATTERY_TEMPERATURE;
+
+ return (200 - tmp) * 10;
+}
+
+static int bd9995x_power_supply_get_property(struct power_supply *psy,
+ enum power_supply_property psp,
+ union power_supply_propval *val)
+{
+ int ret, tmp;
+ struct bd9995x_device *bd = power_supply_get_drvdata(psy);
+ struct bd9995x_state state;
+
+ mutex_lock(&bd->lock);
+ state = bd->state;
+ mutex_unlock(&bd->lock);
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_STATUS:
+ switch (state.chgstm_status) {
+ case CHGSTM_TRICKLE_CHARGE:
+ case CHGSTM_PRE_CHARGE:
+ case CHGSTM_FAST_CHARGE:
+ case CHGSTM_TOP_OFF:
+ val->intval = POWER_SUPPLY_STATUS_CHARGING;
+ break;
+
+ case CHGSTM_DONE:
+ val->intval = POWER_SUPPLY_STATUS_FULL;
+ break;
+
+ case CHGSTM_SUSPEND:
+ case CHGSTM_TEMPERATURE_ERROR_1:
+ case CHGSTM_TEMPERATURE_ERROR_2:
+ case CHGSTM_TEMPERATURE_ERROR_3:
+ case CHGSTM_TEMPERATURE_ERROR_4:
+ case CHGSTM_TEMPERATURE_ERROR_5:
+ case CHGSTM_TEMPERATURE_ERROR_6:
+ case CHGSTM_TEMPERATURE_ERROR_7:
+ case CHGSTM_THERMAL_SHUT_DOWN_1:
+ case CHGSTM_THERMAL_SHUT_DOWN_2:
+ case CHGSTM_THERMAL_SHUT_DOWN_3:
+ case CHGSTM_THERMAL_SHUT_DOWN_4:
+ case CHGSTM_THERMAL_SHUT_DOWN_5:
+ case CHGSTM_THERMAL_SHUT_DOWN_6:
+ case CHGSTM_THERMAL_SHUT_DOWN_7:
+ case CHGSTM_BATTERY_ERROR:
+ val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING;
+ break;
+
+ default:
+ val->intval = POWER_SUPPLY_STATUS_UNKNOWN;
+ break;
+ }
+ break;
+
+ case POWER_SUPPLY_PROP_MANUFACTURER:
+ val->strval = BD9995X_MANUFACTURER;
+ break;
+
+ case POWER_SUPPLY_PROP_ONLINE:
+ val->intval = state.online;
+ break;
+
+ case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT:
+ ret = regmap_field_read(bd->rmap_fields[F_IBATP_VAL], &tmp);
+ if (ret)
+ return ret;
+ val->intval = tmp * 1000;
+ break;
+
+ case POWER_SUPPLY_PROP_CHARGE_AVG:
+ ret = regmap_field_read(bd->rmap_fields[F_IBATP_AVE_VAL], &tmp);
+ if (ret)
+ return ret;
+ val->intval = tmp * 1000;
+ break;
+
+ case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX:
+ /*
+ * Currently the DT uses this property to give the
+ * target current for fast-charging constant current phase.
+ * I think it is correct in a sense.
+ *
+ * Yet, this prop we read and return here is the programmed
+ * safety limit for combined input currents. This feels
+ * also correct in a sense.
+ *
+ * However, this results a mismatch to DT value and value
+ * read from sysfs.
+ */
+ ret = regmap_field_read(bd->rmap_fields[F_SEL_ILIM_VAL], &tmp);
+ if (ret)
+ return ret;
+ val->intval = tmp * 1000;
+ break;
+
+ case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE:
+ if (!state.online) {
+ val->intval = 0;
+ break;
+ }
+
+ ret = regmap_field_read(bd->rmap_fields[F_VFASTCHG_REG_SET1],
+ &tmp);
+ if (ret)
+ return ret;
+
+ /*
+ * The actual range : 2560 to 19200 mV. No matter what the
+ * register says
+ */
+ val->intval = clamp_val(tmp << 4, 2560, 19200);
+ val->intval *= 1000;
+ break;
+
+ case POWER_SUPPLY_PROP_CHARGE_TERM_CURRENT:
+ ret = regmap_field_read(bd->rmap_fields[F_ITERM_SET], &tmp);
+ if (ret)
+ return ret;
+ /* Start step is 64 mA */
+ val->intval = tmp << 6;
+ /* Maximum is 1024 mA - no matter what register says */
+ val->intval = min(val->intval, 1024);
+ val->intval *= 1000;
+ break;
+
+ /* Battery properties which we access through charger */
+ case POWER_SUPPLY_PROP_PRESENT:
+ val->intval = bd9995x_get_prop_batt_present(bd);
+ break;
+
+ case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+ val->intval = bd9995x_get_prop_batt_voltage(bd);
+ break;
+
+ case POWER_SUPPLY_PROP_CURRENT_NOW:
+ val->intval = bd9995x_get_prop_batt_current(bd);
+ break;
+
+ case POWER_SUPPLY_PROP_CHARGE_TYPE:
+ val->intval = bd9995x_get_prop_charge_type(bd);
+ break;
+
+ case POWER_SUPPLY_PROP_HEALTH:
+ val->intval = bd9995x_get_prop_batt_health(bd);
+ break;
+
+ case POWER_SUPPLY_PROP_TEMP:
+ val->intval = bd9995x_get_prop_batt_temp(bd);
+ break;
+
+ case POWER_SUPPLY_PROP_TECHNOLOGY:
+ val->intval = POWER_SUPPLY_TECHNOLOGY_LION;
+ break;
+
+ case POWER_SUPPLY_PROP_MODEL_NAME:
+ val->strval = "bd99954";
+ break;
+
+ default:
+ return -EINVAL;
+
+ }
+
+ return 0;
+}
+
+static int bd9995x_get_chip_state(struct bd9995x_device *bd,
+ struct bd9995x_state *state)
+{
+ int i, ret, tmp;
+ struct {
+ struct regmap_field *id;
+ u16 *data;
+ } state_fields[] = {
+ {
+ bd->rmap_fields[F_CHGSTM_STATE], &state->chgstm_status,
+ }, {
+ bd->rmap_fields[F_VBAT_VSYS_STATUS],
+ &state->vbat_vsys_status,
+ }, {
+ bd->rmap_fields[F_VBUS_VCC_STATUS],
+ &state->vbus_vcc_status,
+ },
+ };
+
+
+ for (i = 0; i < ARRAY_SIZE(state_fields); i++) {
+ ret = regmap_field_read(state_fields[i].id, &tmp);
+ if (ret)
+ return ret;
+
+ *state_fields[i].data = tmp;
+ }
+
+ if (state->vbus_vcc_status & STATUS_VCC_DET ||
+ state->vbus_vcc_status & STATUS_VBUS_DET)
+ state->online = 1;
+ else
+ state->online = 0;
+
+ return 0;
+}
+
+static irqreturn_t bd9995x_irq_handler_thread(int irq, void *private)
+{
+ struct bd9995x_device *bd = private;
+ int ret, status, mask, i;
+ unsigned long tmp;
+ struct bd9995x_state state;
+
+ /*
+ * The bd9995x does not seem to generate big amount of interrupts.
+ * The logic regarding which interrupts can cause relevant
+ * status changes seem to be pretty complex.
+ *
+ * So lets implement really simple and hopefully bullet-proof handler:
+ * It does not really matter which IRQ we handle, we just go and
+ * re-read all interesting statuses + give the framework a nudge.
+ *
+ * Other option would be building a _complex_ and error prone logic
+ * trying to decide what could have been changed (resulting this IRQ
+ * we are now handling). During the normal operation the BD99954 does
+ * not seem to be generating much of interrupts so benefit from such
+ * logic would probably be minimal.
+ */
+
+ ret = regmap_read(bd->rmap, INT0_STATUS, &status);
+ if (ret) {
+ dev_err(bd->dev, "Failed to read IRQ status\n");
+ return IRQ_NONE;
+ }
+
+ ret = regmap_field_read(bd->rmap_fields[F_INT0_SET], &mask);
+ if (ret) {
+ dev_err(bd->dev, "Failed to read IRQ mask\n");
+ return IRQ_NONE;
+ }
+
+ /* Handle only IRQs that are not masked */
+ status &= mask;
+ tmp = status;
+
+ /* Lowest bit does not represent any sub-registers */
+ tmp >>= 1;
+
+ /*
+ * Mask and ack IRQs we will handle (+ the idiot bit)
+ */
+ ret = regmap_field_write(bd->rmap_fields[F_INT0_SET], 0);
+ if (ret) {
+ dev_err(bd->dev, "Failed to mask F_INT0\n");
+ return IRQ_NONE;
+ }
+
+ ret = regmap_write(bd->rmap, INT0_STATUS, status);
+ if (ret) {
+ dev_err(bd->dev, "Failed to ack F_INT0\n");
+ goto err_umask;
+ }
+
+ for_each_set_bit(i, &tmp, 7) {
+ int sub_status, sub_mask;
+ int sub_status_reg[] = {
+ INT1_STATUS, INT2_STATUS, INT3_STATUS, INT4_STATUS,
+ INT5_STATUS, INT6_STATUS, INT7_STATUS,
+ };
+ struct regmap_field *sub_mask_f[] = {
+ bd->rmap_fields[F_INT1_SET],
+ bd->rmap_fields[F_INT2_SET],
+ bd->rmap_fields[F_INT3_SET],
+ bd->rmap_fields[F_INT4_SET],
+ bd->rmap_fields[F_INT5_SET],
+ bd->rmap_fields[F_INT6_SET],
+ bd->rmap_fields[F_INT7_SET],
+ };
+
+ /* Clear sub IRQs */
+ ret = regmap_read(bd->rmap, sub_status_reg[i], &sub_status);
+ if (ret) {
+ dev_err(bd->dev, "Failed to read IRQ sub-status\n");
+ goto err_umask;
+ }
+
+ ret = regmap_field_read(sub_mask_f[i], &sub_mask);
+ if (ret) {
+ dev_err(bd->dev, "Failed to read IRQ sub-mask\n");
+ goto err_umask;
+ }
+
+ /* Ack active sub-statuses */
+ sub_status &= sub_mask;
+
+ ret = regmap_write(bd->rmap, sub_status_reg[i], sub_status);
+ if (ret) {
+ dev_err(bd->dev, "Failed to ack sub-IRQ\n");
+ goto err_umask;
+ }
+ }
+
+ ret = regmap_field_write(bd->rmap_fields[F_INT0_SET], mask);
+ if (ret)
+ /* May as well retry once */
+ goto err_umask;
+
+ /* Read whole chip state */
+ ret = bd9995x_get_chip_state(bd, &state);
+ if (ret < 0) {
+ dev_err(bd->dev, "Failed to read chip state\n");
+ } else {
+ mutex_lock(&bd->lock);
+ bd->state = state;
+ mutex_unlock(&bd->lock);
+
+ power_supply_changed(bd->charger);
+ }
+
+ return IRQ_HANDLED;
+
+err_umask:
+ ret = regmap_field_write(bd->rmap_fields[F_INT0_SET], mask);
+ if (ret)
+ dev_err(bd->dev,
+ "Failed to un-mask F_INT0 - IRQ permanently disabled\n");
+
+ return IRQ_NONE;
+}
+
+static int __bd9995x_chip_reset(struct bd9995x_device *bd)
+{
+ int ret, state;
+ int rst_check_counter = 10;
+ u16 tmp = ALLRST | OTPLD;
+
+ ret = regmap_raw_write(bd->rmap, SYSTEM_CTRL_SET, &tmp, 2);
+ if (ret < 0)
+ return ret;
+
+ do {
+ ret = regmap_field_read(bd->rmap_fields[F_OTPLD_STATE], &state);
+ if (ret)
+ return ret;
+
+ msleep(10);
+ } while (state == 0 && --rst_check_counter);
+
+ if (!rst_check_counter) {
+ dev_err(bd->dev, "chip reset not completed\n");
+ return -ETIMEDOUT;
+ }
+
+ tmp = 0;
+ ret = regmap_raw_write(bd->rmap, SYSTEM_CTRL_SET, &tmp, 2);
+
+ return ret;
+}
+
+static int bd9995x_hw_init(struct bd9995x_device *bd)
+{
+ int ret;
+ int i;
+ struct bd9995x_state state;
+ struct bd9995x_init_data *id = &bd->init_data;
+
+ const struct {
+ enum bd9995x_fields id;
+ u16 value;
+ } init_data[] = {
+ /* Enable the charging trigger after SDP charger attached */
+ {F_SDP_CHG_TRIG_EN, 1},
+ /* Enable charging trigger after SDP charger attached */
+ {F_SDP_CHG_TRIG, 1},
+ /* Disable charging trigger by BC1.2 detection */
+ {F_VBUS_BC_DISEN, 1},
+ /* Disable charging trigger by BC1.2 detection */
+ {F_VCC_BC_DISEN, 1},
+ /* Disable automatic limitation of the input current */
+ {F_ILIM_AUTO_DISEN, 1},
+ /* Select current limitation when SDP charger attached*/
+ {F_SDP_500_SEL, 1},
+ /* Select current limitation when DCP charger attached */
+ {F_DCP_2500_SEL, 1},
+ {F_VSYSREG_SET, id->vsysreg_set},
+ /* Activate USB charging and DC/DC converter */
+ {F_USB_SUS, 0},
+ /* DCDC clock: 1200 kHz*/
+ {F_DCDC_CLK_SEL, 3},
+ /* Enable charging */
+ {F_CHG_EN, 1},
+ /* Disable Input current Limit setting voltage measurement */
+ {F_EXTIADPEN, 0},
+ /* Disable input current limiting */
+ {F_VSYS_PRIORITY, 1},
+ {F_IBUS_LIM_SET, id->ibus_lim_set},
+ {F_ICC_LIM_SET, id->icc_lim_set},
+ /* Charge Termination Current Setting to 0*/
+ {F_ITERM_SET, id->iterm_set},
+ /* Trickle-charge Current Setting */
+ {F_ITRICH_SET, id->itrich_set},
+ /* Pre-charge Current setting */
+ {F_IPRECH_SET, id->iprech_set},
+ /* Fast Charge Current for constant current phase */
+ {F_ICHG_SET, id->ichg_set},
+ /* Fast Charge Voltage Regulation Setting */
+ {F_VFASTCHG_REG_SET1, id->vfastchg_reg_set1},
+ /* Set Pre-charge Voltage Threshold for trickle charging. */
+ {F_VPRECHG_TH_SET, id->vprechg_th_set},
+ {F_VRECHG_SET, id->vrechg_set},
+ {F_VBATOVP_SET, id->vbatovp_set},
+ /* Reverse buck boost voltage Setting */
+ {F_VRBOOST_SET, 0},
+ /* Disable fast-charging watchdog */
+ {F_WDT_FST, 0},
+ /* Disable pre-charging watchdog */
+ {F_WDT_PRE, 0},
+ /* Power save off */
+ {F_POWER_SAVE_MODE, 0},
+ {F_INT1_SET, INT1_ALL},
+ {F_INT2_SET, INT2_ALL},
+ {F_INT3_SET, INT3_ALL},
+ {F_INT4_SET, INT4_ALL},
+ {F_INT5_SET, INT5_ALL},
+ {F_INT6_SET, INT6_ALL},
+ {F_INT7_SET, INT7_ALL},
+ };
+
+ /*
+ * Currently we initialize charger to a known state at startup.
+ * If we want to allow for example the boot code to initialize
+ * charger we should get rid of this.
+ */
+ ret = __bd9995x_chip_reset(bd);
+ if (ret < 0)
+ return ret;
+
+ /* Initialize currents/voltages and other parameters */
+ for (i = 0; i < ARRAY_SIZE(init_data); i++) {
+ ret = regmap_field_write(bd->rmap_fields[init_data[i].id],
+ init_data[i].value);
+ if (ret) {
+ dev_err(bd->dev, "failed to initialize charger (%d)\n",
+ ret);
+ return ret;
+ }
+ }
+
+ ret = bd9995x_get_chip_state(bd, &state);
+ if (ret < 0)
+ return ret;
+
+ mutex_lock(&bd->lock);
+ bd->state = state;
+ mutex_unlock(&bd->lock);
+
+ return 0;
+}
+
+static enum power_supply_property bd9995x_power_supply_props[] = {
+ POWER_SUPPLY_PROP_MANUFACTURER,
+ POWER_SUPPLY_PROP_STATUS,
+ POWER_SUPPLY_PROP_ONLINE,
+ POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT,
+ POWER_SUPPLY_PROP_CHARGE_AVG,
+ POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX,
+ POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE,
+ POWER_SUPPLY_PROP_CHARGE_TERM_CURRENT,
+ /* Battery props we access through charger */
+ POWER_SUPPLY_PROP_PRESENT,
+ POWER_SUPPLY_PROP_VOLTAGE_NOW,
+ POWER_SUPPLY_PROP_CURRENT_NOW,
+ POWER_SUPPLY_PROP_CHARGE_TYPE,
+ POWER_SUPPLY_PROP_HEALTH,
+ POWER_SUPPLY_PROP_TEMP,
+ POWER_SUPPLY_PROP_TECHNOLOGY,
+ POWER_SUPPLY_PROP_MODEL_NAME,
+};
+
+static const struct power_supply_desc bd9995x_power_supply_desc = {
+ .name = "bd9995x-charger",
+ .type = POWER_SUPPLY_TYPE_USB,
+ .properties = bd9995x_power_supply_props,
+ .num_properties = ARRAY_SIZE(bd9995x_power_supply_props),
+ .get_property = bd9995x_power_supply_get_property,
+};
+
+/*
+ * Limit configurations for vbus-input-current and vcc-vacp-input-current
+ * Minimum limit is 0 uA. Max is 511 * 32000 uA = 16352000 uA. This is
+ * configured by writing a register so that each increment in register
+ * value equals to 32000 uA limit increment.
+ *
+ * Eg, value 0x0 is limit 0, value 0x1 is limit 32000, ...
+ * Describe the setting in linear_range table.
+ */
+static const struct linear_range input_current_limit_ranges[] = {
+ {
+ .min = 0,
+ .step = 32000,
+ .min_sel = 0x0,
+ .max_sel = 0x1ff,
+ },
+};
+
+/* Possible trickle, pre-charging and termination current values */
+static const struct linear_range charging_current_ranges[] = {
+ {
+ .min = 0,
+ .step = 64000,
+ .min_sel = 0x0,
+ .max_sel = 0x10,
+ }, {
+ .min = 1024000,
+ .step = 0,
+ .min_sel = 0x11,
+ .max_sel = 0x1f,
+ },
+};
+
+/*
+ * Fast charging voltage regulation, starting re-charging limit
+ * and battery over voltage protection have same possible values
+ */
+static const struct linear_range charge_voltage_regulation_ranges[] = {
+ {
+ .min = 2560000,
+ .step = 0,
+ .min_sel = 0,
+ .max_sel = 0xA0,
+ }, {
+ .min = 2560000,
+ .step = 16000,
+ .min_sel = 0xA0,
+ .max_sel = 0x4B0,
+ }, {
+ .min = 19200000,
+ .step = 0,
+ .min_sel = 0x4B0,
+ .max_sel = 0x7FF,
+ },
+};
+
+/* Possible VSYS voltage regulation values */
+static const struct linear_range vsys_voltage_regulation_ranges[] = {
+ {
+ .min = 2560000,
+ .step = 0,
+ .min_sel = 0,
+ .max_sel = 0x28,
+ }, {
+ .min = 2560000,
+ .step = 64000,
+ .min_sel = 0x28,
+ .max_sel = 0x12C,
+ }, {
+ .min = 19200000,
+ .step = 0,
+ .min_sel = 0x12C,
+ .max_sel = 0x1FF,
+ },
+};
+
+/* Possible settings for switching from trickle to pre-charging limits */
+static const struct linear_range trickle_to_pre_threshold_ranges[] = {
+ {
+ .min = 2048000,
+ .step = 0,
+ .min_sel = 0,
+ .max_sel = 0x20,
+ }, {
+ .min = 2048000,
+ .step = 64000,
+ .min_sel = 0x20,
+ .max_sel = 0x12C,
+ }, {
+ .min = 19200000,
+ .step = 0,
+ .min_sel = 0x12C,
+ .max_sel = 0x1FF
+ }
+};
+
+/* Possible current values for fast-charging constant current phase */
+static const struct linear_range fast_charge_current_ranges[] = {
+ {
+ .min = 0,
+ .step = 64000,
+ .min_sel = 0,
+ .max_sel = 0xFF,
+ }
+};
+
+struct battery_init {
+ const char *name;
+ int *info_data;
+ const struct linear_range *range;
+ int ranges;
+ u16 *data;
+};
+
+struct dt_init {
+ char *prop;
+ const struct linear_range *range;
+ int ranges;
+ u16 *data;
+};
+
+static int bd9995x_fw_probe(struct bd9995x_device *bd)
+{
+ int ret;
+ struct power_supply_battery_info info;
+ u32 property;
+ int i;
+ int regval;
+ bool found;
+ struct bd9995x_init_data *init = &bd->init_data;
+ struct battery_init battery_inits[] = {
+ {
+ .name = "trickle-charging current",
+ .info_data = &info.tricklecharge_current_ua,
+ .range = &charging_current_ranges[0],
+ .ranges = 2,
+ .data = &init->itrich_set,
+ }, {
+ .name = "pre-charging current",
+ .info_data = &info.precharge_current_ua,
+ .range = &charging_current_ranges[0],
+ .ranges = 2,
+ .data = &init->iprech_set,
+ }, {
+ .name = "pre-to-trickle charge voltage threshold",
+ .info_data = &info.precharge_voltage_max_uv,
+ .range = &trickle_to_pre_threshold_ranges[0],
+ .ranges = 2,
+ .data = &init->vprechg_th_set,
+ }, {
+ .name = "charging termination current",
+ .info_data = &info.charge_term_current_ua,
+ .range = &charging_current_ranges[0],
+ .ranges = 2,
+ .data = &init->iterm_set,
+ }, {
+ .name = "charging re-start voltage",
+ .info_data = &info.charge_restart_voltage_uv,
+ .range = &charge_voltage_regulation_ranges[0],
+ .ranges = 2,
+ .data = &init->vrechg_set,
+ }, {
+ .name = "battery overvoltage limit",
+ .info_data = &info.overvoltage_limit_uv,
+ .range = &charge_voltage_regulation_ranges[0],
+ .ranges = 2,
+ .data = &init->vbatovp_set,
+ }, {
+ .name = "fast-charging max current",
+ .info_data = &info.constant_charge_current_max_ua,
+ .range = &fast_charge_current_ranges[0],
+ .ranges = 1,
+ .data = &init->ichg_set,
+ }, {
+ .name = "fast-charging voltage",
+ .info_data = &info.constant_charge_voltage_max_uv,
+ .range = &charge_voltage_regulation_ranges[0],
+ .ranges = 2,
+ .data = &init->vfastchg_reg_set1,
+ },
+ };
+ struct dt_init props[] = {
+ {
+ .prop = "rohm,vsys-regulation-microvolt",
+ .range = &vsys_voltage_regulation_ranges[0],
+ .ranges = 2,
+ .data = &init->vsysreg_set,
+ }, {
+ .prop = "rohm,vbus-input-current-limit-microamp",
+ .range = &input_current_limit_ranges[0],
+ .ranges = 1,
+ .data = &init->ibus_lim_set,
+ }, {
+ .prop = "rohm,vcc-input-current-limit-microamp",
+ .range = &input_current_limit_ranges[0],
+ .ranges = 1,
+ .data = &init->icc_lim_set,
+ },
+ };
+
+ /*
+ * The power_supply_get_battery_info() does not support getting values
+ * from ACPI. Let's fix it if ACPI is required here.
+ */
+ ret = power_supply_get_battery_info(bd->charger, &info);
+ if (ret < 0)
+ return ret;
+
+ for (i = 0; i < ARRAY_SIZE(battery_inits); i++) {
+ int val = *battery_inits[i].info_data;
+ const struct linear_range *range = battery_inits[i].range;
+ int ranges = battery_inits[i].ranges;
+
+ if (val == -EINVAL)
+ continue;
+
+ ret = linear_range_get_selector_low_array(range, ranges, val,
+ &regval, &found);
+ if (ret) {
+ dev_err(bd->dev, "Unsupported value for %s\n",
+ battery_inits[i].name);
+
+ power_supply_put_battery_info(bd->charger, &info);
+ return -EINVAL;
+ }
+ if (!found) {
+ dev_warn(bd->dev,
+ "Unsupported value for %s - using smaller\n",
+ battery_inits[i].name);
+ }
+ *(battery_inits[i].data) = regval;
+ }
+
+ power_supply_put_battery_info(bd->charger, &info);
+
+ for (i = 0; i < ARRAY_SIZE(props); i++) {
+ ret = device_property_read_u32(bd->dev, props[i].prop,
+ &property);
+ if (ret < 0) {
+ dev_err(bd->dev, "failed to read %s", props[i].prop);
+
+ return ret;
+ }
+
+ ret = linear_range_get_selector_low_array(props[i].range,
+ props[i].ranges,
+ property, &regval,
+ &found);
+ if (ret) {
+ dev_err(bd->dev, "Unsupported value for '%s'\n",
+ props[i].prop);
+
+ return -EINVAL;
+ }
+
+ if (!found) {
+ dev_warn(bd->dev,
+ "Unsupported value for '%s' - using smaller\n",
+ props[i].prop);
+ }
+
+ *(props[i].data) = regval;
+ }
+
+ return 0;
+}
+
+static void bd9995x_chip_reset(void *bd)
+{
+ __bd9995x_chip_reset(bd);
+}
+
+static int bd9995x_probe(struct i2c_client *client)
+{
+ struct device *dev = &client->dev;
+ struct bd9995x_device *bd;
+ struct power_supply_config psy_cfg = {};
+ int ret;
+ int i;
+
+ bd = devm_kzalloc(dev, sizeof(*bd), GFP_KERNEL);
+ if (!bd)
+ return -ENOMEM;
+
+ bd->client = client;
+ bd->dev = dev;
+ psy_cfg.drv_data = bd;
+ psy_cfg.of_node = dev->of_node;
+
+ mutex_init(&bd->lock);
+
+ bd->rmap = devm_regmap_init_i2c(client, &bd9995x_regmap_config);
+ if (IS_ERR(bd->rmap)) {
+ dev_err(dev, "Failed to setup register access via i2c\n");
+ return PTR_ERR(bd->rmap);
+ }
+
+ for (i = 0; i < ARRAY_SIZE(bd9995x_reg_fields); i++) {
+ const struct reg_field *reg_fields = bd9995x_reg_fields;
+
+ bd->rmap_fields[i] = devm_regmap_field_alloc(dev, bd->rmap,
+ reg_fields[i]);
+ if (IS_ERR(bd->rmap_fields[i])) {
+ dev_err(dev, "cannot allocate regmap field\n");
+ return PTR_ERR(bd->rmap_fields[i]);
+ }
+ }
+
+ i2c_set_clientdata(client, bd);
+
+ ret = regmap_field_read(bd->rmap_fields[F_CHIP_ID], &bd->chip_id);
+ if (ret) {
+ dev_err(dev, "Cannot read chip ID.\n");
+ return ret;
+ }
+
+ if (bd->chip_id != BD99954_ID) {
+ dev_err(dev, "Chip with ID=0x%x, not supported!\n",
+ bd->chip_id);
+ return -ENODEV;
+ }
+
+ ret = regmap_field_read(bd->rmap_fields[F_CHIP_REV], &bd->chip_rev);
+ if (ret) {
+ dev_err(dev, "Cannot read revision.\n");
+ return ret;
+ }
+
+ dev_info(bd->dev, "Found BD99954 chip rev %d\n", bd->chip_rev);
+
+ /*
+ * We need to init the psy before we can call
+ * power_supply_get_battery_info() for it
+ */
+ bd->charger = devm_power_supply_register(bd->dev,
+ &bd9995x_power_supply_desc,
+ &psy_cfg);
+ if (IS_ERR(bd->charger)) {
+ dev_err(dev, "Failed to register power supply\n");
+ return PTR_ERR(bd->charger);
+ }
+
+ ret = bd9995x_fw_probe(bd);
+ if (ret < 0) {
+ dev_err(dev, "Cannot read device properties.\n");
+ return ret;
+ }
+
+ ret = bd9995x_hw_init(bd);
+ if (ret < 0) {
+ dev_err(dev, "Cannot initialize the chip.\n");
+ return ret;
+ }
+
+ ret = devm_add_action_or_reset(dev, bd9995x_chip_reset, bd);
+ if (ret)
+ return ret;
+
+ return devm_request_threaded_irq(dev, client->irq, NULL,
+ bd9995x_irq_handler_thread,
+ IRQF_TRIGGER_LOW | IRQF_ONESHOT,
+ BD9995X_IRQ_PIN, bd);
+}
+
+static const struct of_device_id bd9995x_of_match[] = {
+ { .compatible = "rohm,bd99954", },
+ { }
+};
+MODULE_DEVICE_TABLE(of, bd9995x_of_match);
+
+static struct i2c_driver bd9995x_driver = {
+ .driver = {
+ .name = "bd9995x-charger",
+ .of_match_table = bd9995x_of_match,
+ },
+ .probe_new = bd9995x_probe,
+};
+module_i2c_driver(bd9995x_driver);
+
+MODULE_AUTHOR("Laine Markus <markus.laine@fi.rohmeurope.com>");
+MODULE_DESCRIPTION("ROHM BD99954 charger driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/power/supply/bd99954-charger.h b/drivers/power/supply/bd99954-charger.h
new file mode 100644
index 000000000..f58897925
--- /dev/null
+++ b/drivers/power/supply/bd99954-charger.h
@@ -0,0 +1,1075 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/* Copyright (C) 2020 ROHM Semiconductors */
+#ifndef BD99954_CHARGER_H
+#define BD99954_CHARGER_H
+
+#include <linux/regmap.h>
+
+#define BD9995X_MANUFACTURER "Rohm Semiconductor"
+#define BD9995X_IRQ_PIN "bd9995x_irq"
+
+#define BD9995X_VSYS_PRECHARGE_OFFSET_MV 200
+
+#define BD99954_ID 0x346
+#define BD99955_ID 0x221
+#define BD99956_ID 0x331
+
+/* Battery Charger Commands */
+#define CHARGING_CURRENT 0x14
+#define CHARGING_VOLTAGE 0x15
+#define PROTECT_SET 0x3E
+#define MAP_SET 0x3F
+
+/* Extended commands */
+#define CHGSTM_STATUS 0x100
+#define VBAT_VSYS_STATUS 0x101
+#define VBUS_VCC_STATUS 0x102
+#define CHGOP_STATUS 0x103
+#define WDT_STATUS 0x104
+#define CUR_ILIM_VAL 0x105
+#define SEL_ILIM_VAL 0x106
+#define IBUS_LIM_SET 0x107
+#define ICC_LIM_SET 0x108
+#define IOTG_LIM_SET 0x109
+#define VIN_CTRL_SET 0x10A
+#define CHGOP_SET1 0x10B
+#define CHGOP_SET2 0x10C
+#define VBUSCLPS_TH_SET 0x10D
+#define VCCCLPS_TH_SET 0x10E
+#define CHGWDT_SET 0x10F
+#define BATTWDT_SET 0x110
+#define VSYSREG_SET 0x111
+#define VSYSVAL_THH_SET 0x112
+#define VSYSVAL_THL_SET 0x113
+#define ITRICH_SET 0x114
+#define IPRECH_SET 0x115
+#define ICHG_SET 0x116
+#define ITERM_SET 0x117
+#define VPRECHG_TH_SET 0x118
+#define VRBOOST_SET 0x119
+#define VFASTCHG_REG_SET1 0x11A
+#define VFASTCHG_REG_SET2 0x11B
+#define VFASTCHG_REG_SET3 0x11C
+#define VRECHG_SET 0x11D
+#define VBATOVP_SET 0x11E
+#define IBATSHORT_SET 0x11F
+#define PROCHOT_CTRL_SET 0x120
+#define PROCHOT_ICRIT_SET 0x121
+#define PROCHOT_INORM_SET 0x122
+#define PROCHOT_IDCHG_SET 0x123
+#define PROCHOT_VSYS_SET 0x124
+#define PMON_IOUT_CTRL_SET 0x125
+#define PMON_DACIN_VAL 0x126
+#define IOUT_DACIN_VAL 0x127
+#define VCC_UCD_SET 0x128
+#define VCC_UCD_STATUS 0x129
+#define VCC_IDD_STATUS 0x12A
+#define VCC_UCD_FCTRL_SET 0x12B
+#define VCC_UCD_FCTRL_EN 0x12C
+#define VBUS_UCD_SET 0x130
+#define VBUS_UCD_STATUS 0x131
+#define VBUS_IDD_STATUS 0x132
+#define VBUS_UCD_FCTRL_SET 0x133
+#define VBUS_UCD_FCTRL_EN 0x134
+#define CHIP_ID 0x138
+#define CHIP_REV 0x139
+#define IC_SET1 0x13A
+#define IC_SET2 0x13B
+#define SYSTEM_STATUS 0x13C
+#define SYSTEM_CTRL_SET 0x13D
+#define VM_CTRL_SET 0x140
+#define THERM_WINDOW_SET1 0x141
+#define THERM_WINDOW_SET2 0x142
+#define THERM_WINDOW_SET3 0x143
+#define THERM_WINDOW_SET4 0x144
+#define THERM_WINDOW_SET5 0x145
+#define IBATP_TH_SET 0x146
+#define IBATM_TH_SET 0x147
+#define VBAT_TH_SET 0x148
+#define THERM_TH_SET 0x149
+#define IACP_TH_SET 0x14A
+#define VACP_TH_SET 0x14B
+#define VBUS_TH_SET 0x14C
+#define VCC_TH_SET 0x14D
+#define VSYS_TH_SET 0x14E
+#define EXTIADP_TH_SET 0x14F
+#define IBATP_VAL 0x150
+#define IBATP_AVE_VAL 0x151
+#define IBATM_VAL 0x152
+#define IBATM_AVE_VAL 0x153
+#define VBAT_VAL 0x154
+#define VBAT_AVE_VAL 0x155
+#define THERM_VAL 0x156
+#define VTH_VAL 0x157
+#define IACP_VAL 0x158
+#define IACP_AVE_VAL 0x159
+#define VACP_VAL 0x15A
+#define VACP_AVE_VAL 0x15B
+#define VBUS_VAL 0x15C
+#define VBUS_AVE_VAL 0x15D
+#define VCC_VAL 0x15E
+#define VCC_AVE_VAL 0x15F
+#define VSYS_VAL 0x160
+#define VSYS_AVE_VAL 0x161
+#define EXTIADP_VAL 0x162
+#define EXTIADP_AVE_VAL 0x163
+#define VACPCLPS_TH_SET 0x164
+#define INT0_SET 0x168
+#define INT1_SET 0x169
+#define INT2_SET 0x16A
+#define INT3_SET 0x16B
+#define INT4_SET 0x16C
+#define INT5_SET 0x16D
+#define INT6_SET 0x16E
+#define INT7_SET 0x16F
+#define INT0_STATUS 0x170
+#define INT1_STATUS 0x171
+#define INT2_STATUS 0x172
+#define INT3_STATUS 0x173
+#define INT4_STATUS 0x174
+#define INT5_STATUS 0x175
+#define INT6_STATUS 0x176
+#define INT7_STATUS 0x177
+#define OTPREG0 0x17A
+#define OTPREG1 0x17B
+#define SMBREG 0x17C
+#define DEBUG_MODE_SET 0x17F
+#define DEBUG0x14 0x214
+#define DEBUG0x1A 0x21A
+
+enum bd9995x_fields {
+ F_PREV_CHGSTM_STATE, F_CHGSTM_STATE,
+ F_VBAT_VSYS_STATUS,
+ F_VBUS_VCC_STATUS,
+ F_BATTEMP, F_VRECHG_DET, F_RBOOST_UV, F_RBOOSTS,
+ F_THERMWDT_VAL, F_CHGWDT_VAL,
+ F_CUR_ILIM_VAL,
+ F_SEL_ILIM_VAL,
+ F_IBUS_LIM_SET,
+ F_ICC_LIM_SET,
+ F_IOTG_LIM_SET,
+ F_OTG_BOTH_EN,
+ F_VRBOOST_TRIG,
+ F_VRBOOST_EN,
+ F_PP_BOTH_THRU,
+ F_VIN_ORD,
+ F_VBUS_EN,
+ F_VCC_EN,
+ F_VSYS_PRIORITY,
+ F_PPC_SUB_CAP,
+ F_PPC_CAP,
+ F_DCP_2500_SEL,
+ F_SDP_500_SEL,
+ F_ILIM_AUTO_DISEN,
+ F_VCC_BC_DISEN,
+ F_VBUS_BC_DISEN,
+ F_SDP_CHG_TRIG_EN,
+ F_SDP_CHG_TRIG,
+ F_AUTO_TOF,
+ F_AUTO_FST,
+ F_AUTO_RECH,
+ F_ILIM_RESET_EN,
+ F_DCDC_1MS_SEL,
+ F_SEL_ILIM_DIV,
+ F_BATT_LEARN,
+ F_CHG_EN,
+ F_USB_SUS,
+ F_CHOP_SS_INIT,
+ F_CHOP_ALL_INIT,
+ F_DCDC_CLK_SEL,
+ F_CHOP_SS,
+ F_CHOP_ALL,
+ F_VBUSCLPS_TH_SET,
+ F_VCCCLPS_TH_SET,
+ F_WDT_FST,
+ F_WDT_PRE,
+ F_WDT_IBAT_SHORT,
+ F_WDT_THERM,
+ F_VSYSREG_SET,
+ F_VSYSVAL_THH_SET,
+ F_VSYSVAL_THL_SET,
+ F_ITRICH_SET,
+ F_IPRECH_SET,
+ F_ICHG_SET,
+ F_ITERM_SET,
+ F_VPRECHG_TH_SET,
+ F_VRBOOST_SET,
+ F_VFASTCHG_REG_SET1,
+ F_VFASTCHG_REG_SET2,
+ F_VFASTCHG_REG_SET3,
+ F_VRECHG_SET,
+ F_VBATOVP_SET,
+ F_IBATM_SHORT_SET,
+ F_PROCHOT_DG_SET,
+ F_PROCHOT_ICRIT_DG_SET,
+ F_PROCHOT_IDCHG_DG_SET,
+ F_PROCHOT_EN,
+ F_PROCHOT_ICRIT_SET,
+ F_PROCHOT_INORM_SET,
+ F_PROCHOT_IDCHG_SET,
+ F_PROCHOT_VSYS_SET,
+ F_IMON_INSEL,
+ F_PMON_INSEL,
+ F_IOUT_OUT_EN,
+ F_IOUT_SOURCE_SEL,
+ F_IOUT_GAIN_SET,
+ F_PMON_OUT_EN,
+ F_PMON_GAIN_SET,
+ F_PMON_DACIN_VAL,
+ F_IOUT_DACIN_VAL,
+ F_VCC_BCSRETRY,
+ F_VCC_ADCRTRY,
+ F_VCC_USBDETEN,
+ F_VCC_IDRDETEN,
+ F_VCC_ENUMRDY,
+ F_VCC_ADCPOLEN,
+ F_VCC_DCDMODE,
+ F_VCC_USB_SW_EN,
+ F_VCC_USB_SW,
+ F_VCC_DCDFAIL,
+ F_VCC_CHGPORT,
+ F_VCC_PUPDET,
+ F_VCC_VBUS_VLD,
+ F_VCC_CHGDET,
+ F_VCC_OTGDET,
+ F_VCC_VBINOP,
+ F_VCC_EXTID,
+ F_VCC_IDRDET,
+ F_VCC_INDO,
+ F_VCC_UCDSWEN,
+ F_VCC_RREF_EN,
+ F_VCC_DPPU_EN,
+ F_VCC_DPREF_EN,
+ F_VCC_DMREF_EN,
+ F_VCC_DPDET_EN,
+ F_VCC_DMDET_EN,
+ F_VCC_DPSINK_EN,
+ F_VCC_DMSINK_EN,
+ F_VCC_DP_BUFF_EN,
+ F_VCC_DM_BUFF_EN,
+ F_VCC_EXTCLKENBL,
+ F_VCC_PLSTESTEN,
+ F_VCC_UCDSWEN_TSTENB,
+ F_VCC_RREF_EN_TSTENB,
+ F_VCC_DPPU_EN_TSTENB,
+ F_VCC_DPREF_EN_TSTENB,
+ F_VCC_DMREF_EN_TSTENB,
+ F_VCC_DPDET_EN_TSTENB,
+ F_VCC_DMDET_EN_TSTENB,
+ F_VCC_DPSINK_EN_TSTENB,
+ F_VCC_DMSINK_EN_TSTENB,
+ F_VCC_DP_BUFF_EN_TSTENB,
+ F_VCC_DM_BUFF_EN_TSTENB,
+ F_VBUS_BCSRETRY,
+ F_VBUS_ADCRTRY,
+ F_VBUS_USBDETEN,
+ F_VBUS_IDRDETEN,
+ F_VBUS_ENUMRDY,
+ F_VBUS_ADCPOLEN,
+ F_VBUS_DCDMODE,
+ F_VBUS_USB_SW_EN,
+ F_VBUS_USB_SW,
+ F_VBUS_DCDFAIL,
+ F_VBUS_CHGPORT,
+ F_VBUS_PUPDET,
+ F_VBUS_VBUS_VLD,
+ F_VBUS_CHGDET,
+ F_VBUS_OTGDET,
+ F_VBUS_VBINOP,
+ F_VBUS_EXTID,
+ F_VBUS_IDRDET,
+ F_VBUS_INDO,
+ F_VBUS_UCDSWEN,
+ F_VBUS_RREF_EN,
+ F_VBUS_DPPU_EN,
+ F_VBUS_DPREF_EN,
+ F_VBUS_DMREF_EN,
+ F_VBUS_DPDET_EN,
+ F_VBUS_DMDET_EN,
+ F_VBUS_DPSINK_EN,
+ F_VBUS_DMSINK_EN,
+ F_VBUS_DP_BUFF_EN,
+ F_VBUS_DM_BUFF_EN,
+ F_VBUS_EXTCLKENBL,
+ F_VBUS_PLSTESTEN,
+ F_VBUS_UCDSWEN_TSTENB,
+ F_VBUS_RREF_EN_TSTENB,
+ F_VBUS_DPPU_EN_TSTENB,
+ F_VBUS_DPREF_EN_TSTENB,
+ F_VBUS_DMREF_EN_TSTENB,
+ F_VBUS_DPDET_EN_TSTENB,
+ F_VBUS_DMDET_EN_TSTENB,
+ F_VBUS_DPSINK_EN_TSTENB,
+ F_VBUS_DMSINK_EN_TSTENB,
+ F_VBUS_DP_BUFF_EN_TSTENB,
+ F_VBUS_DM_BUFF_EN_TSTENB,
+ F_CHIP_ID,
+ F_CHIP_REV,
+ F_ONE_CELL_MODE,
+ F_cell,
+ F_VACP_AUTO_DISCHG,
+ F_VACP_LOAD,
+ F_ACOK_POL,
+ F_ACOK_DISEN,
+ F_DEBUG_SET1,
+ F_DEBUG_SET0,
+ F_MONRST_STATE,
+ F_ALMRST_STATE,
+ F_CHGRST_STATE,
+ F_OTPLD_STATE,
+ F_ALLRST_STATE,
+ F_PROTECT_SET,
+ F_MAP_SET,
+ F_ADCINTERVAL,
+ F_ADCMOD,
+ F_ADCTMOD,
+ F_EXTIADPEN,
+ F_VSYSENB,
+ F_VCCENB,
+ F_VBUSENB,
+ F_VACPENB,
+ F_IACPENB,
+ F_THERMENB,
+ F_VBATENB,
+ F_IBATMENB,
+ F_IBATPENB,
+ F_TMPTHR1B,
+ F_TMPTHR1A,
+ F_TMPTHR2B,
+ F_TMPTHR2A,
+ F_TMPTHR3B,
+ F_TMPTHR3A,
+ F_TMPTHR4B,
+ F_TMPTHR4A,
+ F_TMPTHR5B,
+ F_TMPTHR5A,
+ F_IBATP_TH_SET,
+ F_IBATM_TH_SET,
+ F_VBAT_TH_SET,
+ F_THERM_TH_SET,
+ F_IACP_TH_SET,
+ F_VACP_TH_SET,
+ F_VBUS_TH_SET,
+ F_VCC_TH_SET,
+ F_VSYS_TH_SET,
+ F_EXTIADP_TH_SET,
+ F_IBATP_VAL,
+ F_IBATP_AVE_VAL,
+ F_IBATM_VAL,
+ F_IBATM_AVE_VAL,
+ F_VBAT_VAL,
+ F_VBAT_AVE_VAL,
+ F_THERM_VAL,
+ F_VTH_VAL,
+ F_IACP_VAL,
+ F_IACP_AVE_VAL,
+ F_VACP_VAL,
+ F_VACP_AVE_VAL,
+ F_VBUS_VAL,
+ F_VBUS_AVE_VAL,
+ F_VCC_VAL,
+ F_VCC_AVE_VAL,
+ F_VSYS_VAL,
+ F_VSYS_AVE_VAL,
+ F_EXTIADP_VAL,
+ F_EXTIADP_AVE_VAL,
+ F_VACPCLPS_TH_SET,
+ F_INT7_SET,
+ F_INT6_SET,
+ F_INT5_SET,
+ F_INT4_SET,
+ F_INT3_SET,
+ F_INT2_SET,
+ F_INT1_SET,
+ F_INT0_SET,
+ F_VBUS_RBUV_DET,
+ F_VBUS_RBUV_RES,
+ F_VBUS_TH_DET,
+ F_VBUS_TH_RES,
+ F_VBUS_IIN_MOD,
+ F_VBUS_OV_DET,
+ F_VBUS_OV_RES,
+ F_VBUS_CLPS_DET,
+ F_VBUS_CLPS,
+ F_VBUS_DET,
+ F_VBUS_RES,
+ F_VCC_RBUV_DET,
+ F_VCC_RBUV_RES,
+ F_VCC_TH_DET,
+ F_VCC_TH_RES,
+ F_VCC_IIN_MOD,
+ F_VCC_OVP_DET,
+ F_VCC_OVP_RES,
+ F_VCC_CLPS_DET,
+ F_VCC_CLPS_RES,
+ F_VCC_DET,
+ F_VCC_RES,
+ F_TH_DET,
+ F_TH_RMV,
+ F_TMP_OUT_DET,
+ F_TMP_OUT_RES,
+ F_VBAT_TH_DET,
+ F_VBAT_TH_RES,
+ F_IBAT_SHORT_DET,
+ F_IBAT_SHORT_RES,
+ F_VBAT_OV_DET,
+ F_VBAT_OV_RES,
+ F_BAT_ASSIST_DET,
+ F_BAT_ASSIST_RES,
+ F_VSYS_TH_DET,
+ F_VSYS_TH_RES,
+ F_VSYS_OV_DET,
+ F_VSYS_OV_RES,
+ F_VSYS_SHT_DET,
+ F_VSYS_SHT_RES,
+ F_VSYS_UV_DET,
+ F_VSYS_UV_RES,
+ F_OTP_LOAD_DONE,
+ F_PWR_ON,
+ F_EXTIADP_TRNS,
+ F_EXTIADP_TH_DET,
+ F_EXIADP_TH_RES,
+ F_BAT_MNT_DET,
+ F_BAT_MNT_RES,
+ F_TSD_DET,
+ F_TSD_RES,
+ F_CHGWDT_EXP,
+ F_THERMWDT_EXP,
+ F_TMP_TRNS,
+ F_CHG_TRNS,
+ F_VBUS_UCD_PORT_DET,
+ F_VBUS_UCD_UCHG_DET,
+ F_VBUS_UCD_URID_RMV,
+ F_VBUS_UCD_OTG_DET,
+ F_VBUS_UCD_URID_MOD,
+ F_VCC_UCD_PORT_DET,
+ F_VCC_UCD_UCHG_DET,
+ F_VCC_UCD_URID_RMV,
+ F_VCC_UCD_OTG_DET,
+ F_VCC_UCD_URID_MOD,
+ F_PROCHOT_DET,
+ F_PROCHOT_RES,
+ F_VACP_DET,
+ F_VACP_RES,
+ F_VACP_TH_DET,
+ F_VACP_TH_RES,
+ F_IACP_TH_DET,
+ F_IACP_THE_RES,
+ F_THERM_TH_DET,
+ F_THERM_TH_RES,
+ F_IBATM_TH_DET,
+ F_IBATM_TH_RES,
+ F_IBATP_TH_DET,
+ F_IBATP_TH_RES,
+ F_INT7_STATUS,
+ F_INT6_STATUS,
+ F_INT5_STATUS,
+ F_INT4_STATUS,
+ F_INT3_STATUS,
+ F_INT2_STATUS,
+ F_INT1_STATUS,
+ F_INT0_STATUS,
+ F_ILIM_DECREASE,
+ F_RESERVE_OTPREG1,
+ F_POWER_SAVE_MODE,
+ F_DEBUG_MODE_SET,
+ F_DEBUG0x14,
+ F_DEBUG0x1A,
+ F_MAX_FIELDS
+};
+
+static const struct reg_field bd9995x_reg_fields[] = {
+ [F_PREV_CHGSTM_STATE] = REG_FIELD(CHGSTM_STATUS, 8, 14),
+ [F_CHGSTM_STATE] = REG_FIELD(CHGSTM_STATUS, 0, 6),
+ [F_VBAT_VSYS_STATUS] = REG_FIELD(VBAT_VSYS_STATUS, 0, 15),
+ [F_VBUS_VCC_STATUS] = REG_FIELD(VBUS_VCC_STATUS, 0, 12),
+ [F_BATTEMP] = REG_FIELD(CHGOP_STATUS, 8, 10),
+ [F_VRECHG_DET] = REG_FIELD(CHGOP_STATUS, 6, 6),
+ [F_RBOOST_UV] = REG_FIELD(CHGOP_STATUS, 1, 1),
+ [F_RBOOSTS] = REG_FIELD(CHGOP_STATUS, 0, 0),
+ [F_THERMWDT_VAL] = REG_FIELD(WDT_STATUS, 8, 15),
+ [F_CHGWDT_VAL] = REG_FIELD(WDT_STATUS, 0, 7),
+ [F_CUR_ILIM_VAL] = REG_FIELD(CUR_ILIM_VAL, 0, 13),
+ [F_SEL_ILIM_VAL] = REG_FIELD(SEL_ILIM_VAL, 0, 13),
+ [F_IBUS_LIM_SET] = REG_FIELD(IBUS_LIM_SET, 5, 13),
+ [F_ICC_LIM_SET] = REG_FIELD(ICC_LIM_SET, 5, 13),
+ [F_IOTG_LIM_SET] = REG_FIELD(IOTG_LIM_SET, 5, 13),
+ [F_OTG_BOTH_EN] = REG_FIELD(VIN_CTRL_SET, 15, 15),
+ [F_VRBOOST_TRIG] = REG_FIELD(VIN_CTRL_SET, 14, 14),
+ [F_VRBOOST_EN] = REG_FIELD(VIN_CTRL_SET, 12, 13),
+ [F_PP_BOTH_THRU] = REG_FIELD(VIN_CTRL_SET, 11, 11),
+ [F_VIN_ORD] = REG_FIELD(VIN_CTRL_SET, 7, 7),
+ [F_VBUS_EN] = REG_FIELD(VIN_CTRL_SET, 6, 6),
+ [F_VCC_EN] = REG_FIELD(VIN_CTRL_SET, 5, 5),
+ [F_VSYS_PRIORITY] = REG_FIELD(VIN_CTRL_SET, 4, 4),
+ [F_PPC_SUB_CAP] = REG_FIELD(VIN_CTRL_SET, 2, 3),
+ [F_PPC_CAP] = REG_FIELD(VIN_CTRL_SET, 0, 1),
+ [F_DCP_2500_SEL] = REG_FIELD(CHGOP_SET1, 15, 15),
+ [F_SDP_500_SEL] = REG_FIELD(CHGOP_SET1, 14, 14),
+ [F_ILIM_AUTO_DISEN] = REG_FIELD(CHGOP_SET1, 13, 13),
+ [F_VCC_BC_DISEN] = REG_FIELD(CHGOP_SET1, 11, 11),
+ [F_VBUS_BC_DISEN] = REG_FIELD(CHGOP_SET1, 10, 10),
+ [F_SDP_CHG_TRIG_EN] = REG_FIELD(CHGOP_SET1, 9, 9),
+ [F_SDP_CHG_TRIG] = REG_FIELD(CHGOP_SET1, 8, 8),
+ [F_AUTO_TOF] = REG_FIELD(CHGOP_SET1, 6, 6),
+ [F_AUTO_FST] = REG_FIELD(CHGOP_SET1, 5, 5),
+ [F_AUTO_RECH] = REG_FIELD(CHGOP_SET1, 3, 3),
+ [F_ILIM_RESET_EN] = REG_FIELD(CHGOP_SET2, 14, 14),
+ [F_DCDC_1MS_SEL] = REG_FIELD(CHGOP_SET2, 12, 13),
+ [F_SEL_ILIM_DIV] = REG_FIELD(CHGOP_SET2, 10, 10),
+ [F_BATT_LEARN] = REG_FIELD(CHGOP_SET2, 8, 8),
+ [F_CHG_EN] = REG_FIELD(CHGOP_SET2, 7, 7),
+ [F_USB_SUS] = REG_FIELD(CHGOP_SET2, 6, 6),
+ [F_CHOP_SS_INIT] = REG_FIELD(CHGOP_SET2, 5, 5),
+ [F_CHOP_ALL_INIT] = REG_FIELD(CHGOP_SET2, 4, 4),
+ [F_DCDC_CLK_SEL] = REG_FIELD(CHGOP_SET2, 2, 3),
+ [F_CHOP_SS] = REG_FIELD(CHGOP_SET2, 1, 1),
+ [F_CHOP_ALL] = REG_FIELD(CHGOP_SET2, 0, 0),
+ [F_VBUSCLPS_TH_SET] = REG_FIELD(VBUSCLPS_TH_SET, 7, 14),
+ [F_VCCCLPS_TH_SET] = REG_FIELD(VCCCLPS_TH_SET, 7, 14),
+ [F_WDT_FST] = REG_FIELD(CHGWDT_SET, 8, 15),
+ [F_WDT_PRE] = REG_FIELD(CHGWDT_SET, 0, 7),
+ [F_WDT_IBAT_SHORT] = REG_FIELD(BATTWDT_SET, 8, 15),
+ [F_WDT_THERM] = REG_FIELD(BATTWDT_SET, 0, 7),
+ [F_VSYSREG_SET] = REG_FIELD(VSYSREG_SET, 6, 14),
+ [F_VSYSVAL_THH_SET] = REG_FIELD(VSYSVAL_THH_SET, 6, 14),
+ [F_VSYSVAL_THL_SET] = REG_FIELD(VSYSVAL_THL_SET, 6, 14),
+ [F_ITRICH_SET] = REG_FIELD(ITRICH_SET, 6, 10),
+ [F_IPRECH_SET] = REG_FIELD(IPRECH_SET, 6, 10),
+ [F_ICHG_SET] = REG_FIELD(ICHG_SET, 6, 13),
+ [F_ITERM_SET] = REG_FIELD(ITERM_SET, 6, 10),
+ [F_VPRECHG_TH_SET] = REG_FIELD(VPRECHG_TH_SET, 6, 14),
+ [F_VRBOOST_SET] = REG_FIELD(VRBOOST_SET, 6, 14),
+ [F_VFASTCHG_REG_SET1] = REG_FIELD(VFASTCHG_REG_SET1, 4, 14),
+ [F_VFASTCHG_REG_SET2] = REG_FIELD(VFASTCHG_REG_SET2, 4, 14),
+ [F_VFASTCHG_REG_SET3] = REG_FIELD(VFASTCHG_REG_SET3, 4, 14),
+ [F_VRECHG_SET] = REG_FIELD(VRECHG_SET, 4, 14),
+ [F_VBATOVP_SET] = REG_FIELD(VBATOVP_SET, 4, 14),
+ [F_IBATM_SHORT_SET] = REG_FIELD(IBATSHORT_SET, 0, 14),
+ [F_PROCHOT_DG_SET] = REG_FIELD(PROCHOT_CTRL_SET, 14, 15),
+ [F_PROCHOT_ICRIT_DG_SET] = REG_FIELD(PROCHOT_CTRL_SET, 10, 11),
+ [F_PROCHOT_IDCHG_DG_SET] = REG_FIELD(PROCHOT_CTRL_SET, 8, 9),
+ [F_PROCHOT_EN] = REG_FIELD(PROCHOT_CTRL_SET, 0, 4),
+ [F_PROCHOT_ICRIT_SET] = REG_FIELD(PROCHOT_ICRIT_SET, 0, 14),
+ [F_PROCHOT_INORM_SET] = REG_FIELD(PROCHOT_INORM_SET, 0, 14),
+ [F_PROCHOT_IDCHG_SET] = REG_FIELD(PROCHOT_IDCHG_SET, 0, 14),
+ [F_PROCHOT_VSYS_SET] = REG_FIELD(PROCHOT_VSYS_SET, 0, 14),
+ [F_IMON_INSEL] = REG_FIELD(PMON_IOUT_CTRL_SET, 9, 9),
+ [F_PMON_INSEL] = REG_FIELD(PMON_IOUT_CTRL_SET, 8, 8),
+ [F_IOUT_OUT_EN] = REG_FIELD(PMON_IOUT_CTRL_SET, 7, 7),
+ [F_IOUT_SOURCE_SEL] = REG_FIELD(PMON_IOUT_CTRL_SET, 6, 6),
+ [F_IOUT_GAIN_SET] = REG_FIELD(PMON_IOUT_CTRL_SET, 4, 5),
+ [F_PMON_OUT_EN] = REG_FIELD(PMON_IOUT_CTRL_SET, 3, 3),
+ [F_PMON_GAIN_SET] = REG_FIELD(PMON_IOUT_CTRL_SET, 0, 2),
+ [F_PMON_DACIN_VAL] = REG_FIELD(PMON_DACIN_VAL, 0, 9),
+ [F_IOUT_DACIN_VAL] = REG_FIELD(IOUT_DACIN_VAL, 0, 11),
+ [F_VCC_BCSRETRY] = REG_FIELD(VCC_UCD_SET, 12, 12),
+ [F_VCC_ADCRTRY] = REG_FIELD(VCC_UCD_SET, 8, 8),
+ [F_VCC_USBDETEN] = REG_FIELD(VCC_UCD_SET, 7, 7),
+ [F_VCC_IDRDETEN] = REG_FIELD(VCC_UCD_SET, 6, 6),
+ [F_VCC_ENUMRDY] = REG_FIELD(VCC_UCD_SET, 5, 5),
+ [F_VCC_ADCPOLEN] = REG_FIELD(VCC_UCD_SET, 4, 4),
+ [F_VCC_DCDMODE] = REG_FIELD(VCC_UCD_SET, 3, 3),
+ [F_VCC_USB_SW_EN] = REG_FIELD(VCC_UCD_SET, 1, 1),
+ [F_VCC_USB_SW] = REG_FIELD(VCC_UCD_SET, 0, 0),
+ [F_VCC_DCDFAIL] = REG_FIELD(VCC_UCD_STATUS, 15, 15),
+ [F_VCC_CHGPORT] = REG_FIELD(VCC_UCD_STATUS, 12, 13),
+ [F_VCC_PUPDET] = REG_FIELD(VCC_UCD_STATUS, 11, 11),
+ [F_VCC_VBUS_VLD] = REG_FIELD(VCC_UCD_STATUS, 7, 7),
+ [F_VCC_CHGDET] = REG_FIELD(VCC_UCD_STATUS, 6, 6),
+ [F_VCC_OTGDET] = REG_FIELD(VCC_UCD_STATUS, 3, 3),
+ [F_VCC_VBINOP] = REG_FIELD(VCC_IDD_STATUS, 6, 6),
+ [F_VCC_EXTID] = REG_FIELD(VCC_IDD_STATUS, 5, 5),
+ [F_VCC_IDRDET] = REG_FIELD(VCC_IDD_STATUS, 4, 4),
+ [F_VCC_INDO] = REG_FIELD(VCC_IDD_STATUS, 0, 3),
+ [F_VCC_UCDSWEN] = REG_FIELD(VCC_UCD_FCTRL_SET, 10, 10),
+ [F_VCC_RREF_EN] = REG_FIELD(VCC_UCD_FCTRL_SET, 9, 9),
+ [F_VCC_DPPU_EN] = REG_FIELD(VCC_UCD_FCTRL_SET, 8, 8),
+ [F_VCC_DPREF_EN] = REG_FIELD(VCC_UCD_FCTRL_SET, 7, 7),
+ [F_VCC_DMREF_EN] = REG_FIELD(VCC_UCD_FCTRL_SET, 6, 6),
+ [F_VCC_DPDET_EN] = REG_FIELD(VCC_UCD_FCTRL_SET, 5, 5),
+ [F_VCC_DMDET_EN] = REG_FIELD(VCC_UCD_FCTRL_SET, 4, 4),
+ [F_VCC_DPSINK_EN] = REG_FIELD(VCC_UCD_FCTRL_SET, 3, 3),
+ [F_VCC_DMSINK_EN] = REG_FIELD(VCC_UCD_FCTRL_SET, 2, 2),
+ [F_VCC_DP_BUFF_EN] = REG_FIELD(VCC_UCD_FCTRL_SET, 1, 1),
+ [F_VCC_DM_BUFF_EN] = REG_FIELD(VCC_UCD_FCTRL_SET, 0, 0),
+ [F_VCC_EXTCLKENBL] = REG_FIELD(VCC_UCD_FCTRL_EN, 15, 15),
+ [F_VCC_PLSTESTEN] = REG_FIELD(VCC_UCD_FCTRL_EN, 14, 14),
+ [F_VCC_UCDSWEN_TSTENB] = REG_FIELD(VCC_UCD_FCTRL_EN, 10, 10),
+ [F_VCC_RREF_EN_TSTENB] = REG_FIELD(VCC_UCD_FCTRL_EN, 9, 9),
+ [F_VCC_DPPU_EN_TSTENB] = REG_FIELD(VCC_UCD_FCTRL_EN, 8, 8),
+ [F_VCC_DPREF_EN_TSTENB] = REG_FIELD(VCC_UCD_FCTRL_EN, 7, 7),
+ [F_VCC_DMREF_EN_TSTENB] = REG_FIELD(VCC_UCD_FCTRL_EN, 6, 6),
+ [F_VCC_DPDET_EN_TSTENB] = REG_FIELD(VCC_UCD_FCTRL_EN, 5, 5),
+ [F_VCC_DMDET_EN_TSTENB] = REG_FIELD(VCC_UCD_FCTRL_EN, 4, 4),
+ [F_VCC_DPSINK_EN_TSTENB] = REG_FIELD(VCC_UCD_FCTRL_EN, 3, 3),
+ [F_VCC_DMSINK_EN_TSTENB] = REG_FIELD(VCC_UCD_FCTRL_EN, 2, 2),
+ [F_VCC_DP_BUFF_EN_TSTENB] = REG_FIELD(VCC_UCD_FCTRL_EN, 1, 1),
+ [F_VCC_DM_BUFF_EN_TSTENB] = REG_FIELD(VCC_UCD_FCTRL_EN, 0, 0),
+
+ [F_VBUS_BCSRETRY] = REG_FIELD(VBUS_UCD_SET, 12, 12),
+ [F_VBUS_ADCRTRY] = REG_FIELD(VBUS_UCD_SET, 8, 8),
+ [F_VBUS_USBDETEN] = REG_FIELD(VBUS_UCD_SET, 7, 7),
+ [F_VBUS_IDRDETEN] = REG_FIELD(VBUS_UCD_SET, 6, 6),
+ [F_VBUS_ENUMRDY] = REG_FIELD(VBUS_UCD_SET, 5, 5),
+ [F_VBUS_ADCPOLEN] = REG_FIELD(VBUS_UCD_SET, 4, 4),
+ [F_VBUS_DCDMODE] = REG_FIELD(VBUS_UCD_SET, 3, 3),
+ [F_VBUS_USB_SW_EN] = REG_FIELD(VBUS_UCD_SET, 1, 1),
+ [F_VBUS_USB_SW] = REG_FIELD(VBUS_UCD_SET, 0, 0),
+ [F_VBUS_DCDFAIL] = REG_FIELD(VBUS_UCD_STATUS, 15, 15),
+ [F_VBUS_CHGPORT] = REG_FIELD(VBUS_UCD_STATUS, 12, 13),
+ [F_VBUS_PUPDET] = REG_FIELD(VBUS_UCD_STATUS, 11, 11),
+ [F_VBUS_VBUS_VLD] = REG_FIELD(VBUS_UCD_STATUS, 7, 7),
+ [F_VBUS_CHGDET] = REG_FIELD(VBUS_UCD_STATUS, 6, 6),
+ [F_VBUS_OTGDET] = REG_FIELD(VBUS_UCD_STATUS, 3, 3),
+ [F_VBUS_VBINOP] = REG_FIELD(VBUS_IDD_STATUS, 6, 6),
+ [F_VBUS_EXTID] = REG_FIELD(VBUS_IDD_STATUS, 5, 5),
+ [F_VBUS_IDRDET] = REG_FIELD(VBUS_IDD_STATUS, 4, 4),
+ [F_VBUS_INDO] = REG_FIELD(VBUS_IDD_STATUS, 0, 3),
+ [F_VBUS_UCDSWEN] = REG_FIELD(VCC_UCD_FCTRL_SET, 10, 10),
+ [F_VBUS_RREF_EN] = REG_FIELD(VCC_UCD_FCTRL_SET, 9, 9),
+ [F_VBUS_DPPU_EN] = REG_FIELD(VCC_UCD_FCTRL_SET, 8, 8),
+ [F_VBUS_DPREF_EN] = REG_FIELD(VCC_UCD_FCTRL_SET, 7, 7),
+ [F_VBUS_DMREF_EN] = REG_FIELD(VCC_UCD_FCTRL_SET, 6, 6),
+ [F_VBUS_DPDET_EN] = REG_FIELD(VCC_UCD_FCTRL_SET, 5, 5),
+ [F_VBUS_DMDET_EN] = REG_FIELD(VCC_UCD_FCTRL_SET, 4, 4),
+ [F_VBUS_DPSINK_EN] = REG_FIELD(VCC_UCD_FCTRL_SET, 3, 3),
+ [F_VBUS_DMSINK_EN] = REG_FIELD(VCC_UCD_FCTRL_SET, 2, 2),
+ [F_VBUS_DP_BUFF_EN] = REG_FIELD(VCC_UCD_FCTRL_SET, 1, 1),
+ [F_VBUS_DM_BUFF_EN] = REG_FIELD(VCC_UCD_FCTRL_SET, 0, 0),
+
+ [F_VBUS_EXTCLKENBL] = REG_FIELD(VBUS_UCD_FCTRL_EN, 15, 15),
+ [F_VBUS_PLSTESTEN] = REG_FIELD(VBUS_UCD_FCTRL_EN, 14, 14),
+ [F_VBUS_UCDSWEN_TSTENB] = REG_FIELD(VBUS_UCD_FCTRL_EN, 10, 10),
+ [F_VBUS_RREF_EN_TSTENB] = REG_FIELD(VBUS_UCD_FCTRL_EN, 9, 9),
+ [F_VBUS_DPPU_EN_TSTENB] = REG_FIELD(VBUS_UCD_FCTRL_EN, 8, 8),
+ [F_VBUS_DPREF_EN_TSTENB] = REG_FIELD(VBUS_UCD_FCTRL_EN, 7, 7),
+ [F_VBUS_DMREF_EN_TSTENB] = REG_FIELD(VBUS_UCD_FCTRL_EN, 6, 6),
+ [F_VBUS_DPDET_EN_TSTENB] = REG_FIELD(VBUS_UCD_FCTRL_EN, 5, 5),
+ [F_VBUS_DMDET_EN_TSTENB] = REG_FIELD(VBUS_UCD_FCTRL_EN, 4, 4),
+ [F_VBUS_DPSINK_EN_TSTENB] = REG_FIELD(VBUS_UCD_FCTRL_EN, 3, 3),
+ [F_VBUS_DMSINK_EN_TSTENB] = REG_FIELD(VBUS_UCD_FCTRL_EN, 2, 2),
+ [F_VBUS_DP_BUFF_EN_TSTENB] = REG_FIELD(VBUS_UCD_FCTRL_EN, 1, 1),
+ [F_VBUS_DM_BUFF_EN_TSTENB] = REG_FIELD(VBUS_UCD_FCTRL_EN, 0, 0),
+
+ [F_CHIP_ID] = REG_FIELD(CHIP_ID, 0, 15),
+ [F_CHIP_REV] = REG_FIELD(CHIP_REV, 0, 15),
+ [F_ONE_CELL_MODE] = REG_FIELD(IC_SET1, 11, 11),
+ [F_cell] = REG_FIELD(IC_SET1, 1, 1),
+ [F_VACP_AUTO_DISCHG] = REG_FIELD(IC_SET1, 9, 9),
+ [F_VACP_LOAD] = REG_FIELD(IC_SET1, 8, 8),
+ [F_ACOK_POL] = REG_FIELD(IC_SET1, 1, 1),
+ [F_ACOK_DISEN] = REG_FIELD(IC_SET1, 0, 0),
+ [F_DEBUG_SET1] = REG_FIELD(IC_SET2, 4, 8),
+ [F_DEBUG_SET0] = REG_FIELD(IC_SET2, 0, 0),
+ [F_MONRST_STATE] = REG_FIELD(SYSTEM_STATUS, 6, 6),
+ [F_ALMRST_STATE] = REG_FIELD(SYSTEM_STATUS, 5, 5),
+ [F_CHGRST_STATE] = REG_FIELD(SYSTEM_STATUS, 4, 4),
+ [F_OTPLD_STATE] = REG_FIELD(SYSTEM_STATUS, 1, 1),
+ [F_ALLRST_STATE] = REG_FIELD(SYSTEM_STATUS, 0, 0),
+ [F_PROTECT_SET] = REG_FIELD(PROTECT_SET, 0, 15),
+ [F_MAP_SET] = REG_FIELD(MAP_SET, 0, 15),
+ [F_ADCINTERVAL] = REG_FIELD(VM_CTRL_SET, 14, 15),
+ [F_ADCMOD] = REG_FIELD(VM_CTRL_SET, 12, 13),
+ [F_ADCTMOD] = REG_FIELD(VM_CTRL_SET, 10, 11),
+ [F_EXTIADPEN] = REG_FIELD(VM_CTRL_SET, 9, 9),
+ [F_VSYSENB] = REG_FIELD(VM_CTRL_SET, 8, 8),
+ [F_VCCENB] = REG_FIELD(VM_CTRL_SET, 7, 7),
+ [F_VBUSENB] = REG_FIELD(VM_CTRL_SET, 6, 6),
+ [F_VACPENB] = REG_FIELD(VM_CTRL_SET, 5, 5),
+ [F_IACPENB] = REG_FIELD(VM_CTRL_SET, 4, 4),
+ [F_THERMENB] = REG_FIELD(VM_CTRL_SET, 3, 3),
+ [F_VBATENB] = REG_FIELD(VM_CTRL_SET, 2, 2),
+ [F_IBATMENB] = REG_FIELD(VM_CTRL_SET, 1, 1),
+ [F_IBATPENB] = REG_FIELD(VM_CTRL_SET, 0, 0),
+ [F_TMPTHR1B] = REG_FIELD(THERM_WINDOW_SET1, 8, 15),
+ [F_TMPTHR1A] = REG_FIELD(THERM_WINDOW_SET1, 0, 7),
+ [F_TMPTHR2B] = REG_FIELD(THERM_WINDOW_SET2, 8, 15),
+ [F_TMPTHR2A] = REG_FIELD(THERM_WINDOW_SET2, 0, 7),
+ [F_TMPTHR3B] = REG_FIELD(THERM_WINDOW_SET3, 8, 15),
+ [F_TMPTHR3A] = REG_FIELD(THERM_WINDOW_SET3, 0, 7),
+ [F_TMPTHR4B] = REG_FIELD(THERM_WINDOW_SET4, 8, 15),
+ [F_TMPTHR4A] = REG_FIELD(THERM_WINDOW_SET4, 0, 7),
+ [F_TMPTHR5B] = REG_FIELD(THERM_WINDOW_SET5, 8, 15),
+ [F_TMPTHR5A] = REG_FIELD(THERM_WINDOW_SET5, 0, 7),
+ [F_IBATP_TH_SET] = REG_FIELD(IBATP_TH_SET, 0, 14),
+ [F_IBATM_TH_SET] = REG_FIELD(IBATM_TH_SET, 0, 14),
+ [F_VBAT_TH_SET] = REG_FIELD(VBAT_TH_SET, 0, 14),
+ [F_THERM_TH_SET] = REG_FIELD(THERM_TH_SET, 0, 7),
+ [F_IACP_TH_SET] = REG_FIELD(IACP_TH_SET, 0, 14),
+ [F_VACP_TH_SET] = REG_FIELD(VACP_TH_SET, 0, 14),
+ [F_VBUS_TH_SET] = REG_FIELD(VBUS_TH_SET, 0, 14),
+ [F_VCC_TH_SET] = REG_FIELD(VCC_TH_SET, 0, 14),
+ [F_VSYS_TH_SET] = REG_FIELD(VSYS_TH_SET, 0, 14),
+ [F_EXTIADP_TH_SET] = REG_FIELD(EXTIADP_TH_SET, 0, 11),
+ [F_IBATP_VAL] = REG_FIELD(IBATP_VAL, 0, 14),
+ [F_IBATP_AVE_VAL] = REG_FIELD(IBATP_AVE_VAL, 0, 14),
+ [F_IBATM_VAL] = REG_FIELD(IBATM_VAL, 0, 14),
+ [F_IBATM_AVE_VAL] = REG_FIELD(IBATM_AVE_VAL, 0, 14),
+ [F_VBAT_VAL] = REG_FIELD(VBAT_VAL, 0, 14),
+ [F_VBAT_AVE_VAL] = REG_FIELD(VBAT_AVE_VAL, 0, 14),
+ [F_THERM_VAL] = REG_FIELD(THERM_VAL, 0, 7),
+ [F_VTH_VAL] = REG_FIELD(VTH_VAL, 0, 11),
+ [F_IACP_VAL] = REG_FIELD(IACP_VAL, 0, 14),
+ [F_IACP_AVE_VAL] = REG_FIELD(IACP_AVE_VAL, 0, 14),
+ [F_VACP_VAL] = REG_FIELD(VACP_VAL, 0, 14),
+ [F_VACP_AVE_VAL] = REG_FIELD(VACP_AVE_VAL, 0, 14),
+ [F_VBUS_VAL] = REG_FIELD(VBUS_VAL, 0, 14),
+ [F_VBUS_AVE_VAL] = REG_FIELD(VBUS_AVE_VAL, 0, 14),
+ [F_VCC_VAL] = REG_FIELD(VCC_VAL, 0, 14),
+ [F_VCC_AVE_VAL] = REG_FIELD(VCC_AVE_VAL, 0, 14),
+ [F_VSYS_VAL] = REG_FIELD(VSYS_VAL, 0, 14),
+ [F_VSYS_AVE_VAL] = REG_FIELD(VSYS_AVE_VAL, 0, 14),
+ [F_EXTIADP_VAL] = REG_FIELD(EXTIADP_VAL, 0, 11),
+ [F_EXTIADP_AVE_VAL] = REG_FIELD(EXTIADP_AVE_VAL, 0, 11),
+ [F_VACPCLPS_TH_SET] = REG_FIELD(VACPCLPS_TH_SET, 7, 14),
+ [F_INT7_SET] = REG_FIELD(INT7_SET, 0, 15),
+ [F_INT6_SET] = REG_FIELD(INT6_SET, 0, 13),
+ [F_INT5_SET] = REG_FIELD(INT5_SET, 0, 13),
+ [F_INT4_SET] = REG_FIELD(INT4_SET, 0, 9),
+ [F_INT3_SET] = REG_FIELD(INT3_SET, 0, 15),
+ [F_INT2_SET] = REG_FIELD(INT2_SET, 0, 15),
+ [F_INT1_SET] = REG_FIELD(INT1_SET, 0, 15),
+ [F_INT0_SET] = REG_FIELD(INT0_SET, 0, 7),
+ [F_VBUS_RBUV_DET] = REG_FIELD(INT1_SET, 15, 15),
+ [F_VBUS_RBUV_RES] = REG_FIELD(INT1_SET, 14, 14),
+ [F_VBUS_TH_DET] = REG_FIELD(INT1_SET, 9, 9),
+ [F_VBUS_TH_RES] = REG_FIELD(INT1_SET, 8, 8),
+ [F_VBUS_IIN_MOD] = REG_FIELD(INT1_SET, 6, 6),
+ [F_VBUS_OV_DET] = REG_FIELD(INT1_SET, 5, 5),
+ [F_VBUS_OV_RES] = REG_FIELD(INT1_SET, 4, 4),
+ [F_VBUS_CLPS_DET] = REG_FIELD(INT1_SET, 3, 3),
+ [F_VBUS_CLPS] = REG_FIELD(INT1_SET, 2, 2),
+ [F_VBUS_DET] = REG_FIELD(INT1_SET, 1, 1),
+ [F_VBUS_RES] = REG_FIELD(INT1_SET, 0, 0),
+ [F_VCC_RBUV_DET] = REG_FIELD(INT2_SET, 15, 15),
+ [F_VCC_RBUV_RES] = REG_FIELD(INT2_SET, 14, 14),
+ [F_VCC_TH_DET] = REG_FIELD(INT2_SET, 9, 9),
+ [F_VCC_TH_RES] = REG_FIELD(INT2_SET, 8, 8),
+ [F_VCC_IIN_MOD] = REG_FIELD(INT2_SET, 6, 6),
+ [F_VCC_OVP_DET] = REG_FIELD(INT2_SET, 5, 5),
+ [F_VCC_OVP_RES] = REG_FIELD(INT2_SET, 4, 4),
+ [F_VCC_CLPS_DET] = REG_FIELD(INT2_SET, 3, 3),
+ [F_VCC_CLPS_RES] = REG_FIELD(INT2_SET, 2, 2),
+ [F_VCC_DET] = REG_FIELD(INT2_SET, 1, 1),
+ [F_VCC_RES] = REG_FIELD(INT2_SET, 0, 0),
+ [F_TH_DET] = REG_FIELD(INT3_SET, 15, 15),
+ [F_TH_RMV] = REG_FIELD(INT3_SET, 14, 14),
+ [F_TMP_OUT_DET] = REG_FIELD(INT3_SET, 11, 11),
+ [F_TMP_OUT_RES] = REG_FIELD(INT3_SET, 10, 10),
+ [F_VBAT_TH_DET] = REG_FIELD(INT3_SET, 9, 9),
+ [F_VBAT_TH_RES] = REG_FIELD(INT3_SET, 8, 8),
+ [F_IBAT_SHORT_DET] = REG_FIELD(INT3_SET, 7, 7),
+ [F_IBAT_SHORT_RES] = REG_FIELD(INT3_SET, 6, 6),
+ [F_VBAT_OV_DET] = REG_FIELD(INT3_SET, 5, 5),
+ [F_VBAT_OV_RES] = REG_FIELD(INT3_SET, 4, 4),
+ [F_BAT_ASSIST_DET] = REG_FIELD(INT3_SET, 3, 3),
+ [F_BAT_ASSIST_RES] = REG_FIELD(INT3_SET, 2, 2),
+ [F_VSYS_TH_DET] = REG_FIELD(INT4_SET, 9, 9),
+ [F_VSYS_TH_RES] = REG_FIELD(INT4_SET, 8, 8),
+ [F_VSYS_OV_DET] = REG_FIELD(INT4_SET, 5, 5),
+ [F_VSYS_OV_RES] = REG_FIELD(INT4_SET, 4, 4),
+ [F_VSYS_SHT_DET] = REG_FIELD(INT4_SET, 3, 3),
+ [F_VSYS_SHT_RES] = REG_FIELD(INT4_SET, 2, 2),
+ [F_VSYS_UV_DET] = REG_FIELD(INT4_SET, 1, 1),
+ [F_VSYS_UV_RES] = REG_FIELD(INT4_SET, 0, 0),
+ [F_OTP_LOAD_DONE] = REG_FIELD(INT5_SET, 13, 13),
+ [F_PWR_ON] = REG_FIELD(INT5_SET, 12, 12),
+ [F_EXTIADP_TRNS] = REG_FIELD(INT5_SET, 11, 11),
+ [F_EXTIADP_TH_DET] = REG_FIELD(INT5_SET, 9, 9),
+ [F_EXIADP_TH_RES] = REG_FIELD(INT5_SET, 8, 8),
+ [F_BAT_MNT_DET] = REG_FIELD(INT5_SET, 7, 7),
+ [F_BAT_MNT_RES] = REG_FIELD(INT5_SET, 6, 6),
+ [F_TSD_DET] = REG_FIELD(INT5_SET, 5, 5),
+ [F_TSD_RES] = REG_FIELD(INT5_SET, 4, 4),
+ [F_CHGWDT_EXP] = REG_FIELD(INT5_SET, 3, 3),
+ [F_THERMWDT_EXP] = REG_FIELD(INT5_SET, 2, 2),
+ [F_TMP_TRNS] = REG_FIELD(INT5_SET, 1, 1),
+ [F_CHG_TRNS] = REG_FIELD(INT5_SET, 0, 0),
+ [F_VBUS_UCD_PORT_DET] = REG_FIELD(INT6_SET, 13, 13),
+ [F_VBUS_UCD_UCHG_DET] = REG_FIELD(INT6_SET, 12, 12),
+ [F_VBUS_UCD_URID_RMV] = REG_FIELD(INT6_SET, 11, 11),
+ [F_VBUS_UCD_OTG_DET] = REG_FIELD(INT6_SET, 10, 10),
+ [F_VBUS_UCD_URID_MOD] = REG_FIELD(INT6_SET, 8, 8),
+ [F_VCC_UCD_PORT_DET] = REG_FIELD(INT6_SET, 5, 5),
+ [F_VCC_UCD_UCHG_DET] = REG_FIELD(INT6_SET, 4, 4),
+ [F_VCC_UCD_URID_RMV] = REG_FIELD(INT6_SET, 3, 3),
+ [F_VCC_UCD_OTG_DET] = REG_FIELD(INT6_SET, 2, 2),
+ [F_VCC_UCD_URID_MOD] = REG_FIELD(INT6_SET, 0, 0),
+ [F_PROCHOT_DET] = REG_FIELD(INT7_SET, 15, 15),
+ [F_PROCHOT_RES] = REG_FIELD(INT7_SET, 14, 14),
+ [F_VACP_DET] = REG_FIELD(INT7_SET, 11, 11),
+ [F_VACP_RES] = REG_FIELD(INT7_SET, 10, 10),
+ [F_VACP_TH_DET] = REG_FIELD(INT7_SET, 9, 9),
+ [F_VACP_TH_RES] = REG_FIELD(INT7_SET, 8, 8),
+ [F_IACP_TH_DET] = REG_FIELD(INT7_SET, 7, 7),
+ [F_IACP_THE_RES] = REG_FIELD(INT7_SET, 6, 6),
+ [F_THERM_TH_DET] = REG_FIELD(INT7_SET, 5, 5),
+ [F_THERM_TH_RES] = REG_FIELD(INT7_SET, 4, 4),
+ [F_IBATM_TH_DET] = REG_FIELD(INT7_SET, 3, 3),
+ [F_IBATM_TH_RES] = REG_FIELD(INT7_SET, 2, 2),
+ [F_IBATP_TH_DET] = REG_FIELD(INT7_SET, 1, 1),
+ [F_IBATP_TH_RES] = REG_FIELD(INT7_SET, 0, 0),
+ [F_INT7_STATUS] = REG_FIELD(INT7_STATUS, 0, 15),
+ [F_INT6_STATUS] = REG_FIELD(INT6_STATUS, 0, 13),
+ [F_INT5_STATUS] = REG_FIELD(INT5_STATUS, 0, 13),
+ [F_INT4_STATUS] = REG_FIELD(INT4_STATUS, 0, 9),
+ [F_INT3_STATUS] = REG_FIELD(INT3_STATUS, 0, 15),
+ [F_INT2_STATUS] = REG_FIELD(INT2_STATUS, 0, 15),
+ [F_INT1_STATUS] = REG_FIELD(INT1_STATUS, 0, 15),
+ [F_INT0_STATUS] = REG_FIELD(INT0_STATUS, 0, 7),
+ [F_ILIM_DECREASE] = REG_FIELD(OTPREG0, 0, 15),
+ [F_RESERVE_OTPREG1] = REG_FIELD(OTPREG1, 0, 15),
+ [F_POWER_SAVE_MODE] = REG_FIELD(SMBREG, 0, 15),
+ [F_DEBUG_MODE_SET] = REG_FIELD(DEBUG_MODE_SET, 0, 15),
+ [F_DEBUG0x14] = REG_FIELD(DEBUG0x14, 0, 15),
+ [F_DEBUG0x1A] = REG_FIELD(DEBUG0x1A, 0, 15),
+};
+
+/* CHGSTM_STATEs */
+#define CHGSTM_SUSPEND 0x00
+#define CHGSTM_TRICKLE_CHARGE 0x01
+#define CHGSTM_PRE_CHARGE 0x02
+#define CHGSTM_FAST_CHARGE 0x03
+#define CHGSTM_TOP_OFF 0x04
+#define CHGSTM_DONE 0x05
+#define CHGSTM_OTG 0x08
+#define CHGSTM_OTG_DONE 0x09
+#define CHGSTM_TEMPERATURE_ERROR_1 0x10
+#define CHGSTM_TEMPERATURE_ERROR_2 0x11
+#define CHGSTM_TEMPERATURE_ERROR_3 0x12
+#define CHGSTM_TEMPERATURE_ERROR_4 0x13
+#define CHGSTM_TEMPERATURE_ERROR_5 0x14
+#define CHGSTM_TEMPERATURE_ERROR_6 0x15
+#define CHGSTM_TEMPERATURE_ERROR_7 0x18
+#define CHGSTM_THERMAL_SHUT_DOWN_1 0x20
+#define CHGSTM_THERMAL_SHUT_DOWN_2 0x21
+#define CHGSTM_THERMAL_SHUT_DOWN_3 0x22
+#define CHGSTM_THERMAL_SHUT_DOWN_4 0x23
+#define CHGSTM_THERMAL_SHUT_DOWN_5 0x24
+#define CHGSTM_THERMAL_SHUT_DOWN_6 0x25
+#define CHGSTM_THERMAL_SHUT_DOWN_7 0x28
+#define CHGSTM_BATTERY_ERROR 0x40
+
+/* VBAT_VSYS_STATUS */
+#define STATUS_VSYS_OV BIT(15)
+#define STATUS_VSYS_SSD BIT(14)
+#define STATUS_VSYS_SCP BIT(13)
+#define STATUS_VSYS_UVN BIT(12)
+#define STATUS_IBAT_SHORT BIT(6)
+#define STATUS_VBAT_OV BIT(3)
+#define STATUS_DEAD_BAT BIT(0)
+
+/* VBUS_VCC_STATUS */
+#define STATUS_VACP_DET BIT(12)
+#define STATUS_VCC_OVP BIT(11)
+#define STATUS_ILIM_VCC_MOD BIT(10)
+#define STATUS_VCC_CLPS BIT(9)
+#define STATUS_VCC_DET BIT(8)
+#define STATUS_VBUS_OVP BIT(3)
+#define STATUS_ILIM_VBUS_MOD BIT(2)
+#define STATUS_VBUS_CLPS BIT(1)
+#define STATUS_VBUS_DET BIT(0)
+
+/* Interrupt set/status definitions */
+
+/* INT 0 */
+#define INT0_INT7_STATUS BIT(7)
+#define INT0_INT6_STATUS BIT(6)
+#define INT0_INT5_STATUS BIT(5)
+#define INT0_INT4_STATUS BIT(4)
+#define INT0_INT3_STATUS BIT(3)
+#define INT0_INT2_STATUS BIT(2)
+#define INT0_INT1_STATUS BIT(1)
+#define INT0_INT0_STATUS BIT(0)
+#define INT0_ALL 0xff
+
+/* INT 1 */
+#define VBUS_RBUV_DET BIT(15)
+#define VBUS_RBUV_RES BIT(14)
+#define VBUS_TH_DET BIT(9)
+#define VBUS_TH_RES BIT(8)
+#define VBUS_IIN_MOD BIT(6)
+#define VBUS_OV_DET BIT(5)
+#define VBUS_OV_RES BIT(4)
+#define VBUS_CLPS_DET BIT(3)
+#define VBUS_CLPS BIT(2)
+#define VBUS_DET BIT(1)
+#define VBUS_RES BIT(0)
+#define INT1_ALL (VBUS_RBUV_DET|\
+ VBUS_RBUV_RES|\
+ VBUS_TH_DET |\
+ VBUS_TH_RES |\
+ VBUS_IIN_MOD|\
+ VBUS_OV_DET |\
+ VBUS_OV_RES |\
+ VBUS_CLPS_DET |\
+ VBUS_CLPS |\
+ VBUS_DET |\
+ VBUS_RES)
+
+/* INT 2 */
+#define VCC_RBUV_DET BIT(15)
+#define VCC_RBUV_RES BIT(14)
+#define VCC_TH_DET BIT(9)
+#define VCC_TH_RES BIT(8)
+#define VCC_IIN_MOD BIT(6)
+#define VCC_OVP_DET BIT(5)
+#define VCC_OVP_RES BIT(4)
+#define VCC_CLPS_DET BIT(3)
+#define VCC_CLPS_RES BIT(2)
+#define VCC_DET BIT(1)
+#define VCC_RES BIT(0)
+#define INT2_ALL (VCC_RBUV_DET |\
+ VCC_RBUV_RES |\
+ VCC_TH_DET |\
+ VCC_TH_RES |\
+ VCC_IIN_MOD |\
+ VCC_OVP_DET |\
+ VCC_OVP_RES |\
+ VCC_CLPS_DET |\
+ VCC_CLPS_RES |\
+ VCC_DET |\
+ VCC_RES)
+/* INT 3 */
+#define TH_DET BIT(15)
+#define TH_RMV BIT(14)
+#define TMP_OUT_DET BIT(11)
+#define TMP_OUT_RES BIT(10)
+#define VBAT_TH_DET BIT(9)
+#define VBAT_TH_RES BIT(8)
+#define IBAT_SHORT_DET BIT(7)
+#define IBAT_SHORT_RES BIT(6)
+#define VBAT_OV_DET BIT(5)
+#define VBAT_OV_RES BIT(4)
+#define BAT_ASSIST_DET BIT(3)
+#define BAT_ASSIST_RES BIT(2)
+#define INT3_ALL (TH_DET |\
+ TH_RMV |\
+ TMP_OUT_DET |\
+ TMP_OUT_RES |\
+ VBAT_TH_DET |\
+ VBAT_TH_RES |\
+ IBAT_SHORT_DET |\
+ IBAT_SHORT_RES |\
+ VBAT_OV_DET |\
+ VBAT_OV_RES |\
+ BAT_ASSIST_DET |\
+ BAT_ASSIST_RES)
+
+/* INT 4 */
+#define VSYS_TH_DET BIT(9)
+#define VSYS_TH_RES BIT(8)
+#define VSYS_OV_DET BIT(5)
+#define VSYS_OV_RES BIT(4)
+#define VSYS_SHT_DET BIT(3)
+#define VSYS_SHT_RES BIT(2)
+#define VSYS_UV_DET BIT(1)
+#define VSYS_UV_RES BIT(0)
+#define INT4_ALL (VSYS_TH_DET |\
+ VSYS_TH_RES |\
+ VSYS_OV_DET |\
+ VSYS_OV_RES |\
+ VSYS_SHT_DET |\
+ VSYS_SHT_RES |\
+ VSYS_UV_DET |\
+ VSYS_UV_RES)
+
+/* INT 5*/
+#define OTP_LOAD_DONE BIT(13)
+#define PWR_ON BIT(12)
+#define EXTIADP_TRNS BIT(11)
+#define EXTIADP_TH_DET BIT(9)
+#define EXIADP_TH_RES BIT(8)
+#define BAT_MNT_DET BIT(7)
+#define BAT_MNT_RES BIT(6)
+#define TSD_DET BIT(5)
+#define TSD_RES BIT(4)
+#define CHGWDT_EXP BIT(3)
+#define THERMWDT_EXP BIT(2)
+#define TMP_TRNS BIT(1)
+#define CHG_TRNS BIT(0)
+#define INT5_ALL (OTP_LOAD_DONE |\
+ PWR_ON |\
+ EXTIADP_TRNS |\
+ EXTIADP_TH_DET |\
+ EXIADP_TH_RES |\
+ BAT_MNT_DET |\
+ BAT_MNT_RES |\
+ TSD_DET |\
+ TSD_RES |\
+ CHGWDT_EXP |\
+ THERMWDT_EXP |\
+ TMP_TRNS |\
+ CHG_TRNS)
+
+/* INT 6*/
+#define VBUS_UCD_PORT_DET BIT(13)
+#define VBUS_UCD_UCHG_DET BIT(12)
+#define VBUS_UCD_URID_RMV BIT(11)
+#define VBUS_UCD_OTG_DET BIT(10)
+#define VBUS_UCD_URID_MOD BIT(8)
+#define VCC_UCD_PORT_DET BIT(5)
+#define VCC_UCD_UCHG_DET BIT(4)
+#define VCC_UCD_URID_RMV BIT(3)
+#define VCC_UCD_OTG_DET BIT(2)
+#define VCC_UCD_URID_MOD BIT(0)
+#define INT6_ALL (VBUS_UCD_PORT_DET |\
+ VBUS_UCD_UCHG_DET |\
+ VBUS_UCD_URID_RMV |\
+ VBUS_UCD_OTG_DET |\
+ VBUS_UCD_URID_MOD |\
+ VCC_UCD_PORT_DET |\
+ VCC_UCD_UCHG_DET |\
+ VCC_UCD_URID_RMV |\
+ VCC_UCD_OTG_DET |\
+ VCC_UCD_URID_MOD)
+
+/* INT 7 */
+#define PROCHOT_DET BIT(15)
+#define PROCHOT_RES BIT(14)
+#define VACP_DET BIT(11)
+#define VACP_RES BIT(10)
+#define VACP_TH_DET BIT(9)
+#define VACP_TH_RES BIT(8)
+#define IACP_TH_DET BIT(7)
+#define IACP_THE_RES BIT(6)
+#define THERM_TH_DET BIT(5)
+#define THERM_TH_RES BIT(4)
+#define IBATM_TH_DET BIT(3)
+#define IBATM_TH_RES BIT(2)
+#define IBATP_TH_DET BIT(1)
+#define IBATP_TH_RES BIT(0)
+#define INT7_ALL (PROCHOT_DET |\
+ PROCHOT_RES |\
+ VACP_DET |\
+ VACP_RES |\
+ VACP_TH_DET |\
+ VACP_TH_RES |\
+ IACP_TH_DET |\
+ IACP_THE_RES |\
+ THERM_TH_DET |\
+ THERM_TH_RES |\
+ IBATM_TH_DET |\
+ IBATM_TH_RES |\
+ IBATP_TH_DET |\
+ IBATP_TH_RES)
+
+/* SYSTEM_CTRL_SET*/
+#define MONRST BIT(6)
+#define ALMRST BIT(5)
+#define CHGRST BIT(4)
+#define OTPLD BIT(1)
+#define ALLRST BIT(0)
+
+/* F_BATTEMP */
+#define ROOM 0x0
+#define HOT1 0x1
+#define HOT2 0x2
+#define HOT3 0x3
+#define COLD1 0x4
+#define COLD2 0x5
+#define TEMP_DIS 0x6
+#define BATT_OPEN 0x7
+
+#endif
diff --git a/drivers/power/supply/bq2415x_charger.c b/drivers/power/supply/bq2415x_charger.c
new file mode 100644
index 000000000..5724001e6
--- /dev/null
+++ b/drivers/power/supply/bq2415x_charger.c
@@ -0,0 +1,1793 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * bq2415x charger driver
+ *
+ * Copyright (C) 2011-2013 Pali Rohár <pali@kernel.org>
+ *
+ * Datasheets:
+ * https://www.ti.com/product/bq24150
+ * https://www.ti.com/product/bq24150a
+ * https://www.ti.com/product/bq24152
+ * https://www.ti.com/product/bq24153
+ * https://www.ti.com/product/bq24153a
+ * https://www.ti.com/product/bq24155
+ * https://www.ti.com/product/bq24157s
+ * https://www.ti.com/product/bq24158
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/param.h>
+#include <linux/err.h>
+#include <linux/workqueue.h>
+#include <linux/sysfs.h>
+#include <linux/platform_device.h>
+#include <linux/power_supply.h>
+#include <linux/idr.h>
+#include <linux/i2c.h>
+#include <linux/slab.h>
+#include <linux/acpi.h>
+
+#include <linux/power/bq2415x_charger.h>
+
+/* timeout for resetting chip timer */
+#define BQ2415X_TIMER_TIMEOUT 10
+
+#define BQ2415X_REG_STATUS 0x00
+#define BQ2415X_REG_CONTROL 0x01
+#define BQ2415X_REG_VOLTAGE 0x02
+#define BQ2415X_REG_VENDER 0x03
+#define BQ2415X_REG_CURRENT 0x04
+
+/* reset state for all registers */
+#define BQ2415X_RESET_STATUS BIT(6)
+#define BQ2415X_RESET_CONTROL (BIT(4)|BIT(5))
+#define BQ2415X_RESET_VOLTAGE (BIT(1)|BIT(3))
+#define BQ2415X_RESET_CURRENT (BIT(0)|BIT(3)|BIT(7))
+
+/* status register */
+#define BQ2415X_BIT_TMR_RST 7
+#define BQ2415X_BIT_OTG 7
+#define BQ2415X_BIT_EN_STAT 6
+#define BQ2415X_MASK_STAT (BIT(4)|BIT(5))
+#define BQ2415X_SHIFT_STAT 4
+#define BQ2415X_BIT_BOOST 3
+#define BQ2415X_MASK_FAULT (BIT(0)|BIT(1)|BIT(2))
+#define BQ2415X_SHIFT_FAULT 0
+
+/* control register */
+#define BQ2415X_MASK_LIMIT (BIT(6)|BIT(7))
+#define BQ2415X_SHIFT_LIMIT 6
+#define BQ2415X_MASK_VLOWV (BIT(4)|BIT(5))
+#define BQ2415X_SHIFT_VLOWV 4
+#define BQ2415X_BIT_TE 3
+#define BQ2415X_BIT_CE 2
+#define BQ2415X_BIT_HZ_MODE 1
+#define BQ2415X_BIT_OPA_MODE 0
+
+/* voltage register */
+#define BQ2415X_MASK_VO (BIT(2)|BIT(3)|BIT(4)|BIT(5)|BIT(6)|BIT(7))
+#define BQ2415X_SHIFT_VO 2
+#define BQ2415X_BIT_OTG_PL 1
+#define BQ2415X_BIT_OTG_EN 0
+
+/* vender register */
+#define BQ2415X_MASK_VENDER (BIT(5)|BIT(6)|BIT(7))
+#define BQ2415X_SHIFT_VENDER 5
+#define BQ2415X_MASK_PN (BIT(3)|BIT(4))
+#define BQ2415X_SHIFT_PN 3
+#define BQ2415X_MASK_REVISION (BIT(0)|BIT(1)|BIT(2))
+#define BQ2415X_SHIFT_REVISION 0
+
+/* current register */
+#define BQ2415X_MASK_RESET BIT(7)
+#define BQ2415X_MASK_VI_CHRG (BIT(4)|BIT(5)|BIT(6))
+#define BQ2415X_SHIFT_VI_CHRG 4
+/* N/A BIT(3) */
+#define BQ2415X_MASK_VI_TERM (BIT(0)|BIT(1)|BIT(2))
+#define BQ2415X_SHIFT_VI_TERM 0
+
+
+enum bq2415x_command {
+ BQ2415X_TIMER_RESET,
+ BQ2415X_OTG_STATUS,
+ BQ2415X_STAT_PIN_STATUS,
+ BQ2415X_STAT_PIN_ENABLE,
+ BQ2415X_STAT_PIN_DISABLE,
+ BQ2415X_CHARGE_STATUS,
+ BQ2415X_BOOST_STATUS,
+ BQ2415X_FAULT_STATUS,
+
+ BQ2415X_CHARGE_TERMINATION_STATUS,
+ BQ2415X_CHARGE_TERMINATION_ENABLE,
+ BQ2415X_CHARGE_TERMINATION_DISABLE,
+ BQ2415X_CHARGER_STATUS,
+ BQ2415X_CHARGER_ENABLE,
+ BQ2415X_CHARGER_DISABLE,
+ BQ2415X_HIGH_IMPEDANCE_STATUS,
+ BQ2415X_HIGH_IMPEDANCE_ENABLE,
+ BQ2415X_HIGH_IMPEDANCE_DISABLE,
+ BQ2415X_BOOST_MODE_STATUS,
+ BQ2415X_BOOST_MODE_ENABLE,
+ BQ2415X_BOOST_MODE_DISABLE,
+
+ BQ2415X_OTG_LEVEL,
+ BQ2415X_OTG_ACTIVATE_HIGH,
+ BQ2415X_OTG_ACTIVATE_LOW,
+ BQ2415X_OTG_PIN_STATUS,
+ BQ2415X_OTG_PIN_ENABLE,
+ BQ2415X_OTG_PIN_DISABLE,
+
+ BQ2415X_VENDER_CODE,
+ BQ2415X_PART_NUMBER,
+ BQ2415X_REVISION,
+};
+
+enum bq2415x_chip {
+ BQUNKNOWN,
+ BQ24150,
+ BQ24150A,
+ BQ24151,
+ BQ24151A,
+ BQ24152,
+ BQ24153,
+ BQ24153A,
+ BQ24155,
+ BQ24156,
+ BQ24156A,
+ BQ24157S,
+ BQ24158,
+};
+
+static char *bq2415x_chip_name[] = {
+ "unknown",
+ "bq24150",
+ "bq24150a",
+ "bq24151",
+ "bq24151a",
+ "bq24152",
+ "bq24153",
+ "bq24153a",
+ "bq24155",
+ "bq24156",
+ "bq24156a",
+ "bq24157s",
+ "bq24158",
+};
+
+struct bq2415x_device {
+ struct device *dev;
+ struct bq2415x_platform_data init_data;
+ struct power_supply *charger;
+ struct power_supply_desc charger_desc;
+ struct delayed_work work;
+ struct device_node *notify_node;
+ struct notifier_block nb;
+ enum bq2415x_mode reported_mode;/* mode reported by hook function */
+ enum bq2415x_mode mode; /* currently configured mode */
+ enum bq2415x_chip chip;
+ const char *timer_error;
+ char *model;
+ char *name;
+ int autotimer; /* 1 - if driver automatically reset timer, 0 - not */
+ int automode; /* 1 - enabled, 0 - disabled; -1 - not supported */
+ int id;
+};
+
+/* each registered chip must have unique id */
+static DEFINE_IDR(bq2415x_id);
+
+static DEFINE_MUTEX(bq2415x_id_mutex);
+static DEFINE_MUTEX(bq2415x_timer_mutex);
+static DEFINE_MUTEX(bq2415x_i2c_mutex);
+
+/**** i2c read functions ****/
+
+/* read value from register */
+static int bq2415x_i2c_read(struct bq2415x_device *bq, u8 reg)
+{
+ struct i2c_client *client = to_i2c_client(bq->dev);
+ struct i2c_msg msg[2];
+ u8 val;
+ int ret;
+
+ if (!client->adapter)
+ return -ENODEV;
+
+ msg[0].addr = client->addr;
+ msg[0].flags = 0;
+ msg[0].buf = &reg;
+ msg[0].len = sizeof(reg);
+ msg[1].addr = client->addr;
+ msg[1].flags = I2C_M_RD;
+ msg[1].buf = &val;
+ msg[1].len = sizeof(val);
+
+ mutex_lock(&bq2415x_i2c_mutex);
+ ret = i2c_transfer(client->adapter, msg, ARRAY_SIZE(msg));
+ mutex_unlock(&bq2415x_i2c_mutex);
+
+ if (ret < 0)
+ return ret;
+
+ return val;
+}
+
+/* read value from register, apply mask and right shift it */
+static int bq2415x_i2c_read_mask(struct bq2415x_device *bq, u8 reg,
+ u8 mask, u8 shift)
+{
+ int ret;
+
+ if (shift > 8)
+ return -EINVAL;
+
+ ret = bq2415x_i2c_read(bq, reg);
+ if (ret < 0)
+ return ret;
+ return (ret & mask) >> shift;
+}
+
+/* read value from register and return one specified bit */
+static int bq2415x_i2c_read_bit(struct bq2415x_device *bq, u8 reg, u8 bit)
+{
+ if (bit > 8)
+ return -EINVAL;
+ return bq2415x_i2c_read_mask(bq, reg, BIT(bit), bit);
+}
+
+/**** i2c write functions ****/
+
+/* write value to register */
+static int bq2415x_i2c_write(struct bq2415x_device *bq, u8 reg, u8 val)
+{
+ struct i2c_client *client = to_i2c_client(bq->dev);
+ struct i2c_msg msg[1];
+ u8 data[2];
+ int ret;
+
+ data[0] = reg;
+ data[1] = val;
+
+ msg[0].addr = client->addr;
+ msg[0].flags = 0;
+ msg[0].buf = data;
+ msg[0].len = ARRAY_SIZE(data);
+
+ mutex_lock(&bq2415x_i2c_mutex);
+ ret = i2c_transfer(client->adapter, msg, ARRAY_SIZE(msg));
+ mutex_unlock(&bq2415x_i2c_mutex);
+
+ /* i2c_transfer returns number of messages transferred */
+ if (ret < 0)
+ return ret;
+ else if (ret != 1)
+ return -EIO;
+
+ return 0;
+}
+
+/* read value from register, change it with mask left shifted and write back */
+static int bq2415x_i2c_write_mask(struct bq2415x_device *bq, u8 reg, u8 val,
+ u8 mask, u8 shift)
+{
+ int ret;
+
+ if (shift > 8)
+ return -EINVAL;
+
+ ret = bq2415x_i2c_read(bq, reg);
+ if (ret < 0)
+ return ret;
+
+ ret &= ~mask;
+ ret |= val << shift;
+
+ return bq2415x_i2c_write(bq, reg, ret);
+}
+
+/* change only one bit in register */
+static int bq2415x_i2c_write_bit(struct bq2415x_device *bq, u8 reg,
+ bool val, u8 bit)
+{
+ if (bit > 8)
+ return -EINVAL;
+ return bq2415x_i2c_write_mask(bq, reg, val, BIT(bit), bit);
+}
+
+/**** global functions ****/
+
+/* exec command function */
+static int bq2415x_exec_command(struct bq2415x_device *bq,
+ enum bq2415x_command command)
+{
+ int ret;
+
+ switch (command) {
+ case BQ2415X_TIMER_RESET:
+ return bq2415x_i2c_write_bit(bq, BQ2415X_REG_STATUS,
+ 1, BQ2415X_BIT_TMR_RST);
+ case BQ2415X_OTG_STATUS:
+ return bq2415x_i2c_read_bit(bq, BQ2415X_REG_STATUS,
+ BQ2415X_BIT_OTG);
+ case BQ2415X_STAT_PIN_STATUS:
+ return bq2415x_i2c_read_bit(bq, BQ2415X_REG_STATUS,
+ BQ2415X_BIT_EN_STAT);
+ case BQ2415X_STAT_PIN_ENABLE:
+ return bq2415x_i2c_write_bit(bq, BQ2415X_REG_STATUS, 1,
+ BQ2415X_BIT_EN_STAT);
+ case BQ2415X_STAT_PIN_DISABLE:
+ return bq2415x_i2c_write_bit(bq, BQ2415X_REG_STATUS, 0,
+ BQ2415X_BIT_EN_STAT);
+ case BQ2415X_CHARGE_STATUS:
+ return bq2415x_i2c_read_mask(bq, BQ2415X_REG_STATUS,
+ BQ2415X_MASK_STAT, BQ2415X_SHIFT_STAT);
+ case BQ2415X_BOOST_STATUS:
+ return bq2415x_i2c_read_bit(bq, BQ2415X_REG_STATUS,
+ BQ2415X_BIT_BOOST);
+ case BQ2415X_FAULT_STATUS:
+ return bq2415x_i2c_read_mask(bq, BQ2415X_REG_STATUS,
+ BQ2415X_MASK_FAULT, BQ2415X_SHIFT_FAULT);
+
+ case BQ2415X_CHARGE_TERMINATION_STATUS:
+ return bq2415x_i2c_read_bit(bq, BQ2415X_REG_CONTROL,
+ BQ2415X_BIT_TE);
+ case BQ2415X_CHARGE_TERMINATION_ENABLE:
+ return bq2415x_i2c_write_bit(bq, BQ2415X_REG_CONTROL,
+ 1, BQ2415X_BIT_TE);
+ case BQ2415X_CHARGE_TERMINATION_DISABLE:
+ return bq2415x_i2c_write_bit(bq, BQ2415X_REG_CONTROL,
+ 0, BQ2415X_BIT_TE);
+ case BQ2415X_CHARGER_STATUS:
+ ret = bq2415x_i2c_read_bit(bq, BQ2415X_REG_CONTROL,
+ BQ2415X_BIT_CE);
+ if (ret < 0)
+ return ret;
+ return ret > 0 ? 0 : 1;
+ case BQ2415X_CHARGER_ENABLE:
+ return bq2415x_i2c_write_bit(bq, BQ2415X_REG_CONTROL,
+ 0, BQ2415X_BIT_CE);
+ case BQ2415X_CHARGER_DISABLE:
+ return bq2415x_i2c_write_bit(bq, BQ2415X_REG_CONTROL,
+ 1, BQ2415X_BIT_CE);
+ case BQ2415X_HIGH_IMPEDANCE_STATUS:
+ return bq2415x_i2c_read_bit(bq, BQ2415X_REG_CONTROL,
+ BQ2415X_BIT_HZ_MODE);
+ case BQ2415X_HIGH_IMPEDANCE_ENABLE:
+ return bq2415x_i2c_write_bit(bq, BQ2415X_REG_CONTROL,
+ 1, BQ2415X_BIT_HZ_MODE);
+ case BQ2415X_HIGH_IMPEDANCE_DISABLE:
+ return bq2415x_i2c_write_bit(bq, BQ2415X_REG_CONTROL,
+ 0, BQ2415X_BIT_HZ_MODE);
+ case BQ2415X_BOOST_MODE_STATUS:
+ return bq2415x_i2c_read_bit(bq, BQ2415X_REG_CONTROL,
+ BQ2415X_BIT_OPA_MODE);
+ case BQ2415X_BOOST_MODE_ENABLE:
+ return bq2415x_i2c_write_bit(bq, BQ2415X_REG_CONTROL,
+ 1, BQ2415X_BIT_OPA_MODE);
+ case BQ2415X_BOOST_MODE_DISABLE:
+ return bq2415x_i2c_write_bit(bq, BQ2415X_REG_CONTROL,
+ 0, BQ2415X_BIT_OPA_MODE);
+
+ case BQ2415X_OTG_LEVEL:
+ return bq2415x_i2c_read_bit(bq, BQ2415X_REG_VOLTAGE,
+ BQ2415X_BIT_OTG_PL);
+ case BQ2415X_OTG_ACTIVATE_HIGH:
+ return bq2415x_i2c_write_bit(bq, BQ2415X_REG_VOLTAGE,
+ 1, BQ2415X_BIT_OTG_PL);
+ case BQ2415X_OTG_ACTIVATE_LOW:
+ return bq2415x_i2c_write_bit(bq, BQ2415X_REG_VOLTAGE,
+ 0, BQ2415X_BIT_OTG_PL);
+ case BQ2415X_OTG_PIN_STATUS:
+ return bq2415x_i2c_read_bit(bq, BQ2415X_REG_VOLTAGE,
+ BQ2415X_BIT_OTG_EN);
+ case BQ2415X_OTG_PIN_ENABLE:
+ return bq2415x_i2c_write_bit(bq, BQ2415X_REG_VOLTAGE,
+ 1, BQ2415X_BIT_OTG_EN);
+ case BQ2415X_OTG_PIN_DISABLE:
+ return bq2415x_i2c_write_bit(bq, BQ2415X_REG_VOLTAGE,
+ 0, BQ2415X_BIT_OTG_EN);
+
+ case BQ2415X_VENDER_CODE:
+ return bq2415x_i2c_read_mask(bq, BQ2415X_REG_VENDER,
+ BQ2415X_MASK_VENDER, BQ2415X_SHIFT_VENDER);
+ case BQ2415X_PART_NUMBER:
+ return bq2415x_i2c_read_mask(bq, BQ2415X_REG_VENDER,
+ BQ2415X_MASK_PN, BQ2415X_SHIFT_PN);
+ case BQ2415X_REVISION:
+ return bq2415x_i2c_read_mask(bq, BQ2415X_REG_VENDER,
+ BQ2415X_MASK_REVISION, BQ2415X_SHIFT_REVISION);
+ }
+ return -EINVAL;
+}
+
+/* detect chip type */
+static enum bq2415x_chip bq2415x_detect_chip(struct bq2415x_device *bq)
+{
+ struct i2c_client *client = to_i2c_client(bq->dev);
+ int ret = bq2415x_exec_command(bq, BQ2415X_PART_NUMBER);
+
+ if (ret < 0)
+ return ret;
+
+ switch (client->addr) {
+ case 0x6b:
+ switch (ret) {
+ case 0:
+ if (bq->chip == BQ24151A)
+ return bq->chip;
+ return BQ24151;
+ case 1:
+ if (bq->chip == BQ24150A ||
+ bq->chip == BQ24152 ||
+ bq->chip == BQ24155)
+ return bq->chip;
+ return BQ24150;
+ case 2:
+ if (bq->chip == BQ24153A)
+ return bq->chip;
+ return BQ24153;
+ default:
+ return BQUNKNOWN;
+ }
+ break;
+
+ case 0x6a:
+ switch (ret) {
+ case 0:
+ if (bq->chip == BQ24156A)
+ return bq->chip;
+ return BQ24156;
+ case 2:
+ if (bq->chip == BQ24157S)
+ return bq->chip;
+ return BQ24158;
+ default:
+ return BQUNKNOWN;
+ }
+ break;
+ }
+
+ return BQUNKNOWN;
+}
+
+/* detect chip revision */
+static int bq2415x_detect_revision(struct bq2415x_device *bq)
+{
+ int ret = bq2415x_exec_command(bq, BQ2415X_REVISION);
+ int chip = bq2415x_detect_chip(bq);
+
+ if (ret < 0 || chip < 0)
+ return -1;
+
+ switch (chip) {
+ case BQ24150:
+ case BQ24150A:
+ case BQ24151:
+ case BQ24151A:
+ case BQ24152:
+ if (ret >= 0 && ret <= 3)
+ return ret;
+ return -1;
+ case BQ24153:
+ case BQ24153A:
+ case BQ24156:
+ case BQ24156A:
+ case BQ24157S:
+ case BQ24158:
+ if (ret == 3)
+ return 0;
+ else if (ret == 1)
+ return 1;
+ return -1;
+ case BQ24155:
+ if (ret == 3)
+ return 3;
+ return -1;
+ case BQUNKNOWN:
+ return -1;
+ }
+
+ return -1;
+}
+
+/* return chip vender code */
+static int bq2415x_get_vender_code(struct bq2415x_device *bq)
+{
+ int ret;
+
+ ret = bq2415x_exec_command(bq, BQ2415X_VENDER_CODE);
+ if (ret < 0)
+ return 0;
+
+ /* convert to binary */
+ return (ret & 0x1) +
+ ((ret >> 1) & 0x1) * 10 +
+ ((ret >> 2) & 0x1) * 100;
+}
+
+/* reset all chip registers to default state */
+static void bq2415x_reset_chip(struct bq2415x_device *bq)
+{
+ bq2415x_i2c_write(bq, BQ2415X_REG_CURRENT, BQ2415X_RESET_CURRENT);
+ bq2415x_i2c_write(bq, BQ2415X_REG_VOLTAGE, BQ2415X_RESET_VOLTAGE);
+ bq2415x_i2c_write(bq, BQ2415X_REG_CONTROL, BQ2415X_RESET_CONTROL);
+ bq2415x_i2c_write(bq, BQ2415X_REG_STATUS, BQ2415X_RESET_STATUS);
+ bq->timer_error = NULL;
+}
+
+/**** properties functions ****/
+
+/* set current limit in mA */
+static int bq2415x_set_current_limit(struct bq2415x_device *bq, int mA)
+{
+ int val;
+
+ if (mA <= 100)
+ val = 0;
+ else if (mA <= 500)
+ val = 1;
+ else if (mA <= 800)
+ val = 2;
+ else
+ val = 3;
+
+ return bq2415x_i2c_write_mask(bq, BQ2415X_REG_CONTROL, val,
+ BQ2415X_MASK_LIMIT, BQ2415X_SHIFT_LIMIT);
+}
+
+/* get current limit in mA */
+static int bq2415x_get_current_limit(struct bq2415x_device *bq)
+{
+ int ret;
+
+ ret = bq2415x_i2c_read_mask(bq, BQ2415X_REG_CONTROL,
+ BQ2415X_MASK_LIMIT, BQ2415X_SHIFT_LIMIT);
+ if (ret < 0)
+ return ret;
+ else if (ret == 0)
+ return 100;
+ else if (ret == 1)
+ return 500;
+ else if (ret == 2)
+ return 800;
+ else if (ret == 3)
+ return 1800;
+ return -EINVAL;
+}
+
+/* set weak battery voltage in mV */
+static int bq2415x_set_weak_battery_voltage(struct bq2415x_device *bq, int mV)
+{
+ int val;
+
+ /* round to 100mV */
+ if (mV <= 3400 + 50)
+ val = 0;
+ else if (mV <= 3500 + 50)
+ val = 1;
+ else if (mV <= 3600 + 50)
+ val = 2;
+ else
+ val = 3;
+
+ return bq2415x_i2c_write_mask(bq, BQ2415X_REG_CONTROL, val,
+ BQ2415X_MASK_VLOWV, BQ2415X_SHIFT_VLOWV);
+}
+
+/* get weak battery voltage in mV */
+static int bq2415x_get_weak_battery_voltage(struct bq2415x_device *bq)
+{
+ int ret;
+
+ ret = bq2415x_i2c_read_mask(bq, BQ2415X_REG_CONTROL,
+ BQ2415X_MASK_VLOWV, BQ2415X_SHIFT_VLOWV);
+ if (ret < 0)
+ return ret;
+ return 100 * (34 + ret);
+}
+
+/* set battery regulation voltage in mV */
+static int bq2415x_set_battery_regulation_voltage(struct bq2415x_device *bq,
+ int mV)
+{
+ int val = (mV/10 - 350) / 2;
+
+ /*
+ * According to datasheet, maximum battery regulation voltage is
+ * 4440mV which is b101111 = 47.
+ */
+ if (val < 0)
+ val = 0;
+ else if (val > 47)
+ return -EINVAL;
+
+ return bq2415x_i2c_write_mask(bq, BQ2415X_REG_VOLTAGE, val,
+ BQ2415X_MASK_VO, BQ2415X_SHIFT_VO);
+}
+
+/* get battery regulation voltage in mV */
+static int bq2415x_get_battery_regulation_voltage(struct bq2415x_device *bq)
+{
+ int ret = bq2415x_i2c_read_mask(bq, BQ2415X_REG_VOLTAGE,
+ BQ2415X_MASK_VO, BQ2415X_SHIFT_VO);
+
+ if (ret < 0)
+ return ret;
+ return 10 * (350 + 2*ret);
+}
+
+/* set charge current in mA (platform data must provide resistor sense) */
+static int bq2415x_set_charge_current(struct bq2415x_device *bq, int mA)
+{
+ int val;
+
+ if (bq->init_data.resistor_sense <= 0)
+ return -EINVAL;
+
+ val = (mA * bq->init_data.resistor_sense - 37400) / 6800;
+ if (val < 0)
+ val = 0;
+ else if (val > 7)
+ val = 7;
+
+ return bq2415x_i2c_write_mask(bq, BQ2415X_REG_CURRENT, val,
+ BQ2415X_MASK_VI_CHRG | BQ2415X_MASK_RESET,
+ BQ2415X_SHIFT_VI_CHRG);
+}
+
+/* get charge current in mA (platform data must provide resistor sense) */
+static int bq2415x_get_charge_current(struct bq2415x_device *bq)
+{
+ int ret;
+
+ if (bq->init_data.resistor_sense <= 0)
+ return -EINVAL;
+
+ ret = bq2415x_i2c_read_mask(bq, BQ2415X_REG_CURRENT,
+ BQ2415X_MASK_VI_CHRG, BQ2415X_SHIFT_VI_CHRG);
+ if (ret < 0)
+ return ret;
+ return (37400 + 6800*ret) / bq->init_data.resistor_sense;
+}
+
+/* set termination current in mA (platform data must provide resistor sense) */
+static int bq2415x_set_termination_current(struct bq2415x_device *bq, int mA)
+{
+ int val;
+
+ if (bq->init_data.resistor_sense <= 0)
+ return -EINVAL;
+
+ val = (mA * bq->init_data.resistor_sense - 3400) / 3400;
+ if (val < 0)
+ val = 0;
+ else if (val > 7)
+ val = 7;
+
+ return bq2415x_i2c_write_mask(bq, BQ2415X_REG_CURRENT, val,
+ BQ2415X_MASK_VI_TERM | BQ2415X_MASK_RESET,
+ BQ2415X_SHIFT_VI_TERM);
+}
+
+/* get termination current in mA (platform data must provide resistor sense) */
+static int bq2415x_get_termination_current(struct bq2415x_device *bq)
+{
+ int ret;
+
+ if (bq->init_data.resistor_sense <= 0)
+ return -EINVAL;
+
+ ret = bq2415x_i2c_read_mask(bq, BQ2415X_REG_CURRENT,
+ BQ2415X_MASK_VI_TERM, BQ2415X_SHIFT_VI_TERM);
+ if (ret < 0)
+ return ret;
+ return (3400 + 3400*ret) / bq->init_data.resistor_sense;
+}
+
+/* set default value of property */
+#define bq2415x_set_default_value(bq, prop) \
+ do { \
+ int ret = 0; \
+ if (bq->init_data.prop != -1) \
+ ret = bq2415x_set_##prop(bq, bq->init_data.prop); \
+ if (ret < 0) \
+ return ret; \
+ } while (0)
+
+/* set default values of all properties */
+static int bq2415x_set_defaults(struct bq2415x_device *bq)
+{
+ bq2415x_exec_command(bq, BQ2415X_BOOST_MODE_DISABLE);
+ bq2415x_exec_command(bq, BQ2415X_CHARGER_DISABLE);
+ bq2415x_exec_command(bq, BQ2415X_CHARGE_TERMINATION_DISABLE);
+
+ bq2415x_set_default_value(bq, current_limit);
+ bq2415x_set_default_value(bq, weak_battery_voltage);
+ bq2415x_set_default_value(bq, battery_regulation_voltage);
+
+ if (bq->init_data.resistor_sense > 0) {
+ bq2415x_set_default_value(bq, charge_current);
+ bq2415x_set_default_value(bq, termination_current);
+ bq2415x_exec_command(bq, BQ2415X_CHARGE_TERMINATION_ENABLE);
+ }
+
+ bq2415x_exec_command(bq, BQ2415X_CHARGER_ENABLE);
+ return 0;
+}
+
+/**** charger mode functions ****/
+
+/* set charger mode */
+static int bq2415x_set_mode(struct bq2415x_device *bq, enum bq2415x_mode mode)
+{
+ int ret = 0;
+ int charger = 0;
+ int boost = 0;
+
+ if (mode == BQ2415X_MODE_BOOST)
+ boost = 1;
+ else if (mode != BQ2415X_MODE_OFF)
+ charger = 1;
+
+ if (!charger)
+ ret = bq2415x_exec_command(bq, BQ2415X_CHARGER_DISABLE);
+
+ if (!boost)
+ ret = bq2415x_exec_command(bq, BQ2415X_BOOST_MODE_DISABLE);
+
+ if (ret < 0)
+ return ret;
+
+ switch (mode) {
+ case BQ2415X_MODE_OFF:
+ dev_dbg(bq->dev, "changing mode to: Offline\n");
+ ret = bq2415x_set_current_limit(bq, 100);
+ break;
+ case BQ2415X_MODE_NONE:
+ dev_dbg(bq->dev, "changing mode to: N/A\n");
+ ret = bq2415x_set_current_limit(bq, 100);
+ break;
+ case BQ2415X_MODE_HOST_CHARGER:
+ dev_dbg(bq->dev, "changing mode to: Host/HUB charger\n");
+ ret = bq2415x_set_current_limit(bq, 500);
+ break;
+ case BQ2415X_MODE_DEDICATED_CHARGER:
+ dev_dbg(bq->dev, "changing mode to: Dedicated charger\n");
+ ret = bq2415x_set_current_limit(bq, 1800);
+ break;
+ case BQ2415X_MODE_BOOST: /* Boost mode */
+ dev_dbg(bq->dev, "changing mode to: Boost\n");
+ ret = bq2415x_set_current_limit(bq, 100);
+ break;
+ }
+
+ if (ret < 0)
+ return ret;
+
+ if (charger)
+ ret = bq2415x_exec_command(bq, BQ2415X_CHARGER_ENABLE);
+ else if (boost)
+ ret = bq2415x_exec_command(bq, BQ2415X_BOOST_MODE_ENABLE);
+
+ if (ret < 0)
+ return ret;
+
+ bq2415x_set_default_value(bq, weak_battery_voltage);
+ bq2415x_set_default_value(bq, battery_regulation_voltage);
+
+ bq->mode = mode;
+ sysfs_notify(&bq->charger->dev.kobj, NULL, "mode");
+
+ return 0;
+
+}
+
+static bool bq2415x_update_reported_mode(struct bq2415x_device *bq, int mA)
+{
+ enum bq2415x_mode mode;
+
+ if (mA == 0)
+ mode = BQ2415X_MODE_OFF;
+ else if (mA < 500)
+ mode = BQ2415X_MODE_NONE;
+ else if (mA < 1800)
+ mode = BQ2415X_MODE_HOST_CHARGER;
+ else
+ mode = BQ2415X_MODE_DEDICATED_CHARGER;
+
+ if (bq->reported_mode == mode)
+ return false;
+
+ bq->reported_mode = mode;
+ return true;
+}
+
+static int bq2415x_notifier_call(struct notifier_block *nb,
+ unsigned long val, void *v)
+{
+ struct bq2415x_device *bq =
+ container_of(nb, struct bq2415x_device, nb);
+ struct power_supply *psy = v;
+ union power_supply_propval prop;
+ int ret;
+
+ if (val != PSY_EVENT_PROP_CHANGED)
+ return NOTIFY_OK;
+
+ /* Ignore event if it was not send by notify_node/notify_device */
+ if (bq->notify_node) {
+ if (!psy->dev.parent ||
+ psy->dev.parent->of_node != bq->notify_node)
+ return NOTIFY_OK;
+ } else if (bq->init_data.notify_device) {
+ if (strcmp(psy->desc->name, bq->init_data.notify_device) != 0)
+ return NOTIFY_OK;
+ }
+
+ dev_dbg(bq->dev, "notifier call was called\n");
+
+ ret = power_supply_get_property(psy, POWER_SUPPLY_PROP_CURRENT_MAX,
+ &prop);
+ if (ret != 0)
+ return NOTIFY_OK;
+
+ if (!bq2415x_update_reported_mode(bq, prop.intval))
+ return NOTIFY_OK;
+
+ /* if automode is not enabled do not tell about reported_mode */
+ if (bq->automode < 1)
+ return NOTIFY_OK;
+
+ schedule_delayed_work(&bq->work, 0);
+
+ return NOTIFY_OK;
+}
+
+/**** timer functions ****/
+
+/* enable/disable auto resetting chip timer */
+static void bq2415x_set_autotimer(struct bq2415x_device *bq, int state)
+{
+ mutex_lock(&bq2415x_timer_mutex);
+
+ if (bq->autotimer == state) {
+ mutex_unlock(&bq2415x_timer_mutex);
+ return;
+ }
+
+ bq->autotimer = state;
+
+ if (state) {
+ schedule_delayed_work(&bq->work, BQ2415X_TIMER_TIMEOUT * HZ);
+ bq2415x_exec_command(bq, BQ2415X_TIMER_RESET);
+ bq->timer_error = NULL;
+ } else {
+ cancel_delayed_work_sync(&bq->work);
+ }
+
+ mutex_unlock(&bq2415x_timer_mutex);
+}
+
+/* called by bq2415x_timer_work on timer error */
+static void bq2415x_timer_error(struct bq2415x_device *bq, const char *msg)
+{
+ bq->timer_error = msg;
+ sysfs_notify(&bq->charger->dev.kobj, NULL, "timer");
+ dev_err(bq->dev, "%s\n", msg);
+ if (bq->automode > 0)
+ bq->automode = 0;
+ bq2415x_set_mode(bq, BQ2415X_MODE_OFF);
+ bq2415x_set_autotimer(bq, 0);
+}
+
+/* delayed work function for auto resetting chip timer */
+static void bq2415x_timer_work(struct work_struct *work)
+{
+ struct bq2415x_device *bq = container_of(work, struct bq2415x_device,
+ work.work);
+ int ret;
+ int error;
+ int boost;
+
+ if (bq->automode > 0 && (bq->reported_mode != bq->mode)) {
+ sysfs_notify(&bq->charger->dev.kobj, NULL, "reported_mode");
+ bq2415x_set_mode(bq, bq->reported_mode);
+ }
+
+ if (!bq->autotimer)
+ return;
+
+ ret = bq2415x_exec_command(bq, BQ2415X_TIMER_RESET);
+ if (ret < 0) {
+ bq2415x_timer_error(bq, "Resetting timer failed");
+ return;
+ }
+
+ boost = bq2415x_exec_command(bq, BQ2415X_BOOST_MODE_STATUS);
+ if (boost < 0) {
+ bq2415x_timer_error(bq, "Unknown error");
+ return;
+ }
+
+ error = bq2415x_exec_command(bq, BQ2415X_FAULT_STATUS);
+ if (error < 0) {
+ bq2415x_timer_error(bq, "Unknown error");
+ return;
+ }
+
+ if (boost) {
+ switch (error) {
+ /* Non fatal errors, chip is OK */
+ case 0: /* No error */
+ break;
+ case 6: /* Timer expired */
+ dev_err(bq->dev, "Timer expired\n");
+ break;
+ case 3: /* Battery voltage too low */
+ dev_err(bq->dev, "Battery voltage to low\n");
+ break;
+
+ /* Fatal errors, disable and reset chip */
+ case 1: /* Overvoltage protection (chip fried) */
+ bq2415x_timer_error(bq,
+ "Overvoltage protection (chip fried)");
+ return;
+ case 2: /* Overload */
+ bq2415x_timer_error(bq, "Overload");
+ return;
+ case 4: /* Battery overvoltage protection */
+ bq2415x_timer_error(bq,
+ "Battery overvoltage protection");
+ return;
+ case 5: /* Thermal shutdown (too hot) */
+ bq2415x_timer_error(bq,
+ "Thermal shutdown (too hot)");
+ return;
+ case 7: /* N/A */
+ bq2415x_timer_error(bq, "Unknown error");
+ return;
+ }
+ } else {
+ switch (error) {
+ /* Non fatal errors, chip is OK */
+ case 0: /* No error */
+ break;
+ case 2: /* Sleep mode */
+ dev_err(bq->dev, "Sleep mode\n");
+ break;
+ case 3: /* Poor input source */
+ dev_err(bq->dev, "Poor input source\n");
+ break;
+ case 6: /* Timer expired */
+ dev_err(bq->dev, "Timer expired\n");
+ break;
+ case 7: /* No battery */
+ dev_err(bq->dev, "No battery\n");
+ break;
+
+ /* Fatal errors, disable and reset chip */
+ case 1: /* Overvoltage protection (chip fried) */
+ bq2415x_timer_error(bq,
+ "Overvoltage protection (chip fried)");
+ return;
+ case 4: /* Battery overvoltage protection */
+ bq2415x_timer_error(bq,
+ "Battery overvoltage protection");
+ return;
+ case 5: /* Thermal shutdown (too hot) */
+ bq2415x_timer_error(bq,
+ "Thermal shutdown (too hot)");
+ return;
+ }
+ }
+
+ schedule_delayed_work(&bq->work, BQ2415X_TIMER_TIMEOUT * HZ);
+}
+
+/**** power supply interface code ****/
+
+static enum power_supply_property bq2415x_power_supply_props[] = {
+ /* TODO: maybe add more power supply properties */
+ POWER_SUPPLY_PROP_STATUS,
+ POWER_SUPPLY_PROP_MODEL_NAME,
+};
+
+static int bq2415x_power_supply_get_property(struct power_supply *psy,
+ enum power_supply_property psp,
+ union power_supply_propval *val)
+{
+ struct bq2415x_device *bq = power_supply_get_drvdata(psy);
+ int ret;
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_STATUS:
+ ret = bq2415x_exec_command(bq, BQ2415X_CHARGE_STATUS);
+ if (ret < 0)
+ return ret;
+ else if (ret == 0) /* Ready */
+ val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING;
+ else if (ret == 1) /* Charge in progress */
+ val->intval = POWER_SUPPLY_STATUS_CHARGING;
+ else if (ret == 2) /* Charge done */
+ val->intval = POWER_SUPPLY_STATUS_FULL;
+ else
+ val->intval = POWER_SUPPLY_STATUS_UNKNOWN;
+ break;
+ case POWER_SUPPLY_PROP_MODEL_NAME:
+ val->strval = bq->model;
+ break;
+ default:
+ return -EINVAL;
+ }
+ return 0;
+}
+
+static void bq2415x_power_supply_exit(struct bq2415x_device *bq)
+{
+ bq->autotimer = 0;
+ if (bq->automode > 0)
+ bq->automode = 0;
+ cancel_delayed_work_sync(&bq->work);
+ power_supply_unregister(bq->charger);
+ kfree(bq->model);
+}
+
+/**** additional sysfs entries for power supply interface ****/
+
+/* show *_status entries */
+static ssize_t bq2415x_sysfs_show_status(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct power_supply *psy = dev_get_drvdata(dev);
+ struct bq2415x_device *bq = power_supply_get_drvdata(psy);
+ enum bq2415x_command command;
+ int ret;
+
+ if (strcmp(attr->attr.name, "otg_status") == 0)
+ command = BQ2415X_OTG_STATUS;
+ else if (strcmp(attr->attr.name, "charge_status") == 0)
+ command = BQ2415X_CHARGE_STATUS;
+ else if (strcmp(attr->attr.name, "boost_status") == 0)
+ command = BQ2415X_BOOST_STATUS;
+ else if (strcmp(attr->attr.name, "fault_status") == 0)
+ command = BQ2415X_FAULT_STATUS;
+ else
+ return -EINVAL;
+
+ ret = bq2415x_exec_command(bq, command);
+ if (ret < 0)
+ return ret;
+ return sprintf(buf, "%d\n", ret);
+}
+
+/*
+ * set timer entry:
+ * auto - enable auto mode
+ * off - disable auto mode
+ * (other values) - reset chip timer
+ */
+static ssize_t bq2415x_sysfs_set_timer(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf,
+ size_t count)
+{
+ struct power_supply *psy = dev_get_drvdata(dev);
+ struct bq2415x_device *bq = power_supply_get_drvdata(psy);
+ int ret = 0;
+
+ if (strncmp(buf, "auto", 4) == 0)
+ bq2415x_set_autotimer(bq, 1);
+ else if (strncmp(buf, "off", 3) == 0)
+ bq2415x_set_autotimer(bq, 0);
+ else
+ ret = bq2415x_exec_command(bq, BQ2415X_TIMER_RESET);
+
+ if (ret < 0)
+ return ret;
+ return count;
+}
+
+/* show timer entry (auto or off) */
+static ssize_t bq2415x_sysfs_show_timer(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct power_supply *psy = dev_get_drvdata(dev);
+ struct bq2415x_device *bq = power_supply_get_drvdata(psy);
+
+ if (bq->timer_error)
+ return sprintf(buf, "%s\n", bq->timer_error);
+
+ if (bq->autotimer)
+ return sprintf(buf, "auto\n");
+ return sprintf(buf, "off\n");
+}
+
+/*
+ * set mode entry:
+ * auto - if automode is supported, enable it and set mode to reported
+ * none - disable charger and boost mode
+ * host - charging mode for host/hub chargers (current limit 500mA)
+ * dedicated - charging mode for dedicated chargers (unlimited current limit)
+ * boost - disable charger and enable boost mode
+ */
+static ssize_t bq2415x_sysfs_set_mode(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf,
+ size_t count)
+{
+ struct power_supply *psy = dev_get_drvdata(dev);
+ struct bq2415x_device *bq = power_supply_get_drvdata(psy);
+ enum bq2415x_mode mode;
+ int ret = 0;
+
+ if (strncmp(buf, "auto", 4) == 0) {
+ if (bq->automode < 0)
+ return -EINVAL;
+ bq->automode = 1;
+ mode = bq->reported_mode;
+ } else if (strncmp(buf, "off", 3) == 0) {
+ if (bq->automode > 0)
+ bq->automode = 0;
+ mode = BQ2415X_MODE_OFF;
+ } else if (strncmp(buf, "none", 4) == 0) {
+ if (bq->automode > 0)
+ bq->automode = 0;
+ mode = BQ2415X_MODE_NONE;
+ } else if (strncmp(buf, "host", 4) == 0) {
+ if (bq->automode > 0)
+ bq->automode = 0;
+ mode = BQ2415X_MODE_HOST_CHARGER;
+ } else if (strncmp(buf, "dedicated", 9) == 0) {
+ if (bq->automode > 0)
+ bq->automode = 0;
+ mode = BQ2415X_MODE_DEDICATED_CHARGER;
+ } else if (strncmp(buf, "boost", 5) == 0) {
+ if (bq->automode > 0)
+ bq->automode = 0;
+ mode = BQ2415X_MODE_BOOST;
+ } else if (strncmp(buf, "reset", 5) == 0) {
+ bq2415x_reset_chip(bq);
+ bq2415x_set_defaults(bq);
+ if (bq->automode <= 0)
+ return count;
+ bq->automode = 1;
+ mode = bq->reported_mode;
+ } else {
+ return -EINVAL;
+ }
+
+ ret = bq2415x_set_mode(bq, mode);
+ if (ret < 0)
+ return ret;
+ return count;
+}
+
+/* show mode entry (auto, none, host, dedicated or boost) */
+static ssize_t bq2415x_sysfs_show_mode(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct power_supply *psy = dev_get_drvdata(dev);
+ struct bq2415x_device *bq = power_supply_get_drvdata(psy);
+ ssize_t ret = 0;
+
+ if (bq->automode > 0)
+ ret += sprintf(buf+ret, "auto (");
+
+ switch (bq->mode) {
+ case BQ2415X_MODE_OFF:
+ ret += sprintf(buf+ret, "off");
+ break;
+ case BQ2415X_MODE_NONE:
+ ret += sprintf(buf+ret, "none");
+ break;
+ case BQ2415X_MODE_HOST_CHARGER:
+ ret += sprintf(buf+ret, "host");
+ break;
+ case BQ2415X_MODE_DEDICATED_CHARGER:
+ ret += sprintf(buf+ret, "dedicated");
+ break;
+ case BQ2415X_MODE_BOOST:
+ ret += sprintf(buf+ret, "boost");
+ break;
+ }
+
+ if (bq->automode > 0)
+ ret += sprintf(buf+ret, ")");
+
+ ret += sprintf(buf+ret, "\n");
+ return ret;
+}
+
+/* show reported_mode entry (none, host, dedicated or boost) */
+static ssize_t bq2415x_sysfs_show_reported_mode(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct power_supply *psy = dev_get_drvdata(dev);
+ struct bq2415x_device *bq = power_supply_get_drvdata(psy);
+
+ if (bq->automode < 0)
+ return -EINVAL;
+
+ switch (bq->reported_mode) {
+ case BQ2415X_MODE_OFF:
+ return sprintf(buf, "off\n");
+ case BQ2415X_MODE_NONE:
+ return sprintf(buf, "none\n");
+ case BQ2415X_MODE_HOST_CHARGER:
+ return sprintf(buf, "host\n");
+ case BQ2415X_MODE_DEDICATED_CHARGER:
+ return sprintf(buf, "dedicated\n");
+ case BQ2415X_MODE_BOOST:
+ return sprintf(buf, "boost\n");
+ }
+
+ return -EINVAL;
+}
+
+/* directly set raw value to chip register, format: 'register value' */
+static ssize_t bq2415x_sysfs_set_registers(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf,
+ size_t count)
+{
+ struct power_supply *psy = dev_get_drvdata(dev);
+ struct bq2415x_device *bq = power_supply_get_drvdata(psy);
+ ssize_t ret = 0;
+ unsigned int reg;
+ unsigned int val;
+
+ if (sscanf(buf, "%x %x", &reg, &val) != 2)
+ return -EINVAL;
+
+ if (reg > 4 || val > 255)
+ return -EINVAL;
+
+ ret = bq2415x_i2c_write(bq, reg, val);
+ if (ret < 0)
+ return ret;
+ return count;
+}
+
+/* print value of chip register, format: 'register=value' */
+static ssize_t bq2415x_sysfs_print_reg(struct bq2415x_device *bq,
+ u8 reg,
+ char *buf)
+{
+ int ret = bq2415x_i2c_read(bq, reg);
+
+ if (ret < 0)
+ return sprintf(buf, "%#.2x=error %d\n", reg, ret);
+ return sprintf(buf, "%#.2x=%#.2x\n", reg, ret);
+}
+
+/* show all raw values of chip register, format per line: 'register=value' */
+static ssize_t bq2415x_sysfs_show_registers(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct power_supply *psy = dev_get_drvdata(dev);
+ struct bq2415x_device *bq = power_supply_get_drvdata(psy);
+ ssize_t ret = 0;
+
+ ret += bq2415x_sysfs_print_reg(bq, BQ2415X_REG_STATUS, buf+ret);
+ ret += bq2415x_sysfs_print_reg(bq, BQ2415X_REG_CONTROL, buf+ret);
+ ret += bq2415x_sysfs_print_reg(bq, BQ2415X_REG_VOLTAGE, buf+ret);
+ ret += bq2415x_sysfs_print_reg(bq, BQ2415X_REG_VENDER, buf+ret);
+ ret += bq2415x_sysfs_print_reg(bq, BQ2415X_REG_CURRENT, buf+ret);
+ return ret;
+}
+
+/* set current and voltage limit entries (in mA or mV) */
+static ssize_t bq2415x_sysfs_set_limit(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf,
+ size_t count)
+{
+ struct power_supply *psy = dev_get_drvdata(dev);
+ struct bq2415x_device *bq = power_supply_get_drvdata(psy);
+ long val;
+ int ret;
+
+ if (kstrtol(buf, 10, &val) < 0)
+ return -EINVAL;
+
+ if (strcmp(attr->attr.name, "current_limit") == 0)
+ ret = bq2415x_set_current_limit(bq, val);
+ else if (strcmp(attr->attr.name, "weak_battery_voltage") == 0)
+ ret = bq2415x_set_weak_battery_voltage(bq, val);
+ else if (strcmp(attr->attr.name, "battery_regulation_voltage") == 0)
+ ret = bq2415x_set_battery_regulation_voltage(bq, val);
+ else if (strcmp(attr->attr.name, "charge_current") == 0)
+ ret = bq2415x_set_charge_current(bq, val);
+ else if (strcmp(attr->attr.name, "termination_current") == 0)
+ ret = bq2415x_set_termination_current(bq, val);
+ else
+ return -EINVAL;
+
+ if (ret < 0)
+ return ret;
+ return count;
+}
+
+/* show current and voltage limit entries (in mA or mV) */
+static ssize_t bq2415x_sysfs_show_limit(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct power_supply *psy = dev_get_drvdata(dev);
+ struct bq2415x_device *bq = power_supply_get_drvdata(psy);
+ int ret;
+
+ if (strcmp(attr->attr.name, "current_limit") == 0)
+ ret = bq2415x_get_current_limit(bq);
+ else if (strcmp(attr->attr.name, "weak_battery_voltage") == 0)
+ ret = bq2415x_get_weak_battery_voltage(bq);
+ else if (strcmp(attr->attr.name, "battery_regulation_voltage") == 0)
+ ret = bq2415x_get_battery_regulation_voltage(bq);
+ else if (strcmp(attr->attr.name, "charge_current") == 0)
+ ret = bq2415x_get_charge_current(bq);
+ else if (strcmp(attr->attr.name, "termination_current") == 0)
+ ret = bq2415x_get_termination_current(bq);
+ else
+ return -EINVAL;
+
+ if (ret < 0)
+ return ret;
+ return sprintf(buf, "%d\n", ret);
+}
+
+/* set *_enable entries */
+static ssize_t bq2415x_sysfs_set_enable(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf,
+ size_t count)
+{
+ struct power_supply *psy = dev_get_drvdata(dev);
+ struct bq2415x_device *bq = power_supply_get_drvdata(psy);
+ enum bq2415x_command command;
+ long val;
+ int ret;
+
+ if (kstrtol(buf, 10, &val) < 0)
+ return -EINVAL;
+
+ if (strcmp(attr->attr.name, "charge_termination_enable") == 0)
+ command = val ? BQ2415X_CHARGE_TERMINATION_ENABLE :
+ BQ2415X_CHARGE_TERMINATION_DISABLE;
+ else if (strcmp(attr->attr.name, "high_impedance_enable") == 0)
+ command = val ? BQ2415X_HIGH_IMPEDANCE_ENABLE :
+ BQ2415X_HIGH_IMPEDANCE_DISABLE;
+ else if (strcmp(attr->attr.name, "otg_pin_enable") == 0)
+ command = val ? BQ2415X_OTG_PIN_ENABLE :
+ BQ2415X_OTG_PIN_DISABLE;
+ else if (strcmp(attr->attr.name, "stat_pin_enable") == 0)
+ command = val ? BQ2415X_STAT_PIN_ENABLE :
+ BQ2415X_STAT_PIN_DISABLE;
+ else
+ return -EINVAL;
+
+ ret = bq2415x_exec_command(bq, command);
+ if (ret < 0)
+ return ret;
+ return count;
+}
+
+/* show *_enable entries */
+static ssize_t bq2415x_sysfs_show_enable(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct power_supply *psy = dev_get_drvdata(dev);
+ struct bq2415x_device *bq = power_supply_get_drvdata(psy);
+ enum bq2415x_command command;
+ int ret;
+
+ if (strcmp(attr->attr.name, "charge_termination_enable") == 0)
+ command = BQ2415X_CHARGE_TERMINATION_STATUS;
+ else if (strcmp(attr->attr.name, "high_impedance_enable") == 0)
+ command = BQ2415X_HIGH_IMPEDANCE_STATUS;
+ else if (strcmp(attr->attr.name, "otg_pin_enable") == 0)
+ command = BQ2415X_OTG_PIN_STATUS;
+ else if (strcmp(attr->attr.name, "stat_pin_enable") == 0)
+ command = BQ2415X_STAT_PIN_STATUS;
+ else
+ return -EINVAL;
+
+ ret = bq2415x_exec_command(bq, command);
+ if (ret < 0)
+ return ret;
+ return sprintf(buf, "%d\n", ret);
+}
+
+static DEVICE_ATTR(current_limit, S_IWUSR | S_IRUGO,
+ bq2415x_sysfs_show_limit, bq2415x_sysfs_set_limit);
+static DEVICE_ATTR(weak_battery_voltage, S_IWUSR | S_IRUGO,
+ bq2415x_sysfs_show_limit, bq2415x_sysfs_set_limit);
+static DEVICE_ATTR(battery_regulation_voltage, S_IWUSR | S_IRUGO,
+ bq2415x_sysfs_show_limit, bq2415x_sysfs_set_limit);
+static DEVICE_ATTR(charge_current, S_IWUSR | S_IRUGO,
+ bq2415x_sysfs_show_limit, bq2415x_sysfs_set_limit);
+static DEVICE_ATTR(termination_current, S_IWUSR | S_IRUGO,
+ bq2415x_sysfs_show_limit, bq2415x_sysfs_set_limit);
+
+static DEVICE_ATTR(charge_termination_enable, S_IWUSR | S_IRUGO,
+ bq2415x_sysfs_show_enable, bq2415x_sysfs_set_enable);
+static DEVICE_ATTR(high_impedance_enable, S_IWUSR | S_IRUGO,
+ bq2415x_sysfs_show_enable, bq2415x_sysfs_set_enable);
+static DEVICE_ATTR(otg_pin_enable, S_IWUSR | S_IRUGO,
+ bq2415x_sysfs_show_enable, bq2415x_sysfs_set_enable);
+static DEVICE_ATTR(stat_pin_enable, S_IWUSR | S_IRUGO,
+ bq2415x_sysfs_show_enable, bq2415x_sysfs_set_enable);
+
+static DEVICE_ATTR(reported_mode, S_IRUGO,
+ bq2415x_sysfs_show_reported_mode, NULL);
+static DEVICE_ATTR(mode, S_IWUSR | S_IRUGO,
+ bq2415x_sysfs_show_mode, bq2415x_sysfs_set_mode);
+static DEVICE_ATTR(timer, S_IWUSR | S_IRUGO,
+ bq2415x_sysfs_show_timer, bq2415x_sysfs_set_timer);
+
+static DEVICE_ATTR(registers, S_IWUSR | S_IRUGO,
+ bq2415x_sysfs_show_registers, bq2415x_sysfs_set_registers);
+
+static DEVICE_ATTR(otg_status, S_IRUGO, bq2415x_sysfs_show_status, NULL);
+static DEVICE_ATTR(charge_status, S_IRUGO, bq2415x_sysfs_show_status, NULL);
+static DEVICE_ATTR(boost_status, S_IRUGO, bq2415x_sysfs_show_status, NULL);
+static DEVICE_ATTR(fault_status, S_IRUGO, bq2415x_sysfs_show_status, NULL);
+
+static struct attribute *bq2415x_sysfs_attrs[] = {
+ /*
+ * TODO: some (appropriate) of these attrs should be switched to
+ * use power supply class props.
+ */
+ &dev_attr_current_limit.attr,
+ &dev_attr_weak_battery_voltage.attr,
+ &dev_attr_battery_regulation_voltage.attr,
+ &dev_attr_charge_current.attr,
+ &dev_attr_termination_current.attr,
+
+ &dev_attr_charge_termination_enable.attr,
+ &dev_attr_high_impedance_enable.attr,
+ &dev_attr_otg_pin_enable.attr,
+ &dev_attr_stat_pin_enable.attr,
+
+ &dev_attr_reported_mode.attr,
+ &dev_attr_mode.attr,
+ &dev_attr_timer.attr,
+
+ &dev_attr_registers.attr,
+
+ &dev_attr_otg_status.attr,
+ &dev_attr_charge_status.attr,
+ &dev_attr_boost_status.attr,
+ &dev_attr_fault_status.attr,
+ NULL,
+};
+
+ATTRIBUTE_GROUPS(bq2415x_sysfs);
+
+static int bq2415x_power_supply_init(struct bq2415x_device *bq)
+{
+ int ret;
+ int chip;
+ char revstr[8];
+ struct power_supply_config psy_cfg = {
+ .drv_data = bq,
+ .of_node = bq->dev->of_node,
+ .attr_grp = bq2415x_sysfs_groups,
+ };
+
+ bq->charger_desc.name = bq->name;
+ bq->charger_desc.type = POWER_SUPPLY_TYPE_USB;
+ bq->charger_desc.properties = bq2415x_power_supply_props;
+ bq->charger_desc.num_properties =
+ ARRAY_SIZE(bq2415x_power_supply_props);
+ bq->charger_desc.get_property = bq2415x_power_supply_get_property;
+
+ ret = bq2415x_detect_chip(bq);
+ if (ret < 0)
+ chip = BQUNKNOWN;
+ else
+ chip = ret;
+
+ ret = bq2415x_detect_revision(bq);
+ if (ret < 0)
+ strcpy(revstr, "unknown");
+ else
+ sprintf(revstr, "1.%d", ret);
+
+ bq->model = kasprintf(GFP_KERNEL,
+ "chip %s, revision %s, vender code %.3d",
+ bq2415x_chip_name[chip], revstr,
+ bq2415x_get_vender_code(bq));
+ if (!bq->model) {
+ dev_err(bq->dev, "failed to allocate model name\n");
+ return -ENOMEM;
+ }
+
+ bq->charger = power_supply_register(bq->dev, &bq->charger_desc,
+ &psy_cfg);
+ if (IS_ERR(bq->charger)) {
+ kfree(bq->model);
+ return PTR_ERR(bq->charger);
+ }
+
+ return 0;
+}
+
+/* main bq2415x probe function */
+static int bq2415x_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ int ret;
+ int num;
+ char *name = NULL;
+ struct bq2415x_device *bq;
+ struct device_node *np = client->dev.of_node;
+ struct bq2415x_platform_data *pdata = client->dev.platform_data;
+ const struct acpi_device_id *acpi_id = NULL;
+ struct power_supply *notify_psy = NULL;
+ union power_supply_propval prop;
+
+ if (!np && !pdata && !ACPI_HANDLE(&client->dev)) {
+ dev_err(&client->dev, "Neither devicetree, nor platform data, nor ACPI support\n");
+ return -ENODEV;
+ }
+
+ /* Get new ID for the new device */
+ mutex_lock(&bq2415x_id_mutex);
+ num = idr_alloc(&bq2415x_id, client, 0, 0, GFP_KERNEL);
+ mutex_unlock(&bq2415x_id_mutex);
+ if (num < 0)
+ return num;
+
+ if (id) {
+ name = kasprintf(GFP_KERNEL, "%s-%d", id->name, num);
+ } else if (ACPI_HANDLE(&client->dev)) {
+ acpi_id =
+ acpi_match_device(client->dev.driver->acpi_match_table,
+ &client->dev);
+ if (!acpi_id) {
+ dev_err(&client->dev, "failed to match device name\n");
+ ret = -ENODEV;
+ goto error_1;
+ }
+ name = kasprintf(GFP_KERNEL, "%s-%d", acpi_id->id, num);
+ }
+ if (!name) {
+ dev_err(&client->dev, "failed to allocate device name\n");
+ ret = -ENOMEM;
+ goto error_1;
+ }
+
+ bq = devm_kzalloc(&client->dev, sizeof(*bq), GFP_KERNEL);
+ if (!bq) {
+ ret = -ENOMEM;
+ goto error_2;
+ }
+
+ i2c_set_clientdata(client, bq);
+
+ bq->id = num;
+ bq->dev = &client->dev;
+ if (id)
+ bq->chip = id->driver_data;
+ else if (ACPI_HANDLE(bq->dev))
+ bq->chip = acpi_id->driver_data;
+ bq->name = name;
+ bq->mode = BQ2415X_MODE_OFF;
+ bq->reported_mode = BQ2415X_MODE_OFF;
+ bq->autotimer = 0;
+ bq->automode = 0;
+
+ if (np || ACPI_HANDLE(bq->dev)) {
+ ret = device_property_read_u32(bq->dev,
+ "ti,current-limit",
+ &bq->init_data.current_limit);
+ if (ret)
+ goto error_2;
+ ret = device_property_read_u32(bq->dev,
+ "ti,weak-battery-voltage",
+ &bq->init_data.weak_battery_voltage);
+ if (ret)
+ goto error_2;
+ ret = device_property_read_u32(bq->dev,
+ "ti,battery-regulation-voltage",
+ &bq->init_data.battery_regulation_voltage);
+ if (ret)
+ goto error_2;
+ ret = device_property_read_u32(bq->dev,
+ "ti,charge-current",
+ &bq->init_data.charge_current);
+ if (ret)
+ goto error_2;
+ ret = device_property_read_u32(bq->dev,
+ "ti,termination-current",
+ &bq->init_data.termination_current);
+ if (ret)
+ goto error_2;
+ ret = device_property_read_u32(bq->dev,
+ "ti,resistor-sense",
+ &bq->init_data.resistor_sense);
+ if (ret)
+ goto error_2;
+ if (np)
+ bq->notify_node = of_parse_phandle(np,
+ "ti,usb-charger-detection", 0);
+ } else {
+ memcpy(&bq->init_data, pdata, sizeof(bq->init_data));
+ }
+
+ bq2415x_reset_chip(bq);
+
+ ret = bq2415x_power_supply_init(bq);
+ if (ret) {
+ dev_err(bq->dev, "failed to register power supply: %d\n", ret);
+ goto error_2;
+ }
+
+ ret = bq2415x_set_defaults(bq);
+ if (ret) {
+ dev_err(bq->dev, "failed to set default values: %d\n", ret);
+ goto error_3;
+ }
+
+ if (bq->notify_node || bq->init_data.notify_device) {
+ bq->nb.notifier_call = bq2415x_notifier_call;
+ ret = power_supply_reg_notifier(&bq->nb);
+ if (ret) {
+ dev_err(bq->dev, "failed to reg notifier: %d\n", ret);
+ goto error_3;
+ }
+
+ bq->automode = 1;
+ dev_info(bq->dev, "automode supported, waiting for events\n");
+ } else {
+ bq->automode = -1;
+ dev_info(bq->dev, "automode not supported\n");
+ }
+
+ /* Query for initial reported_mode and set it */
+ if (bq->nb.notifier_call) {
+ if (np) {
+ notify_psy = power_supply_get_by_phandle(np,
+ "ti,usb-charger-detection");
+ if (IS_ERR(notify_psy))
+ notify_psy = NULL;
+ } else if (bq->init_data.notify_device) {
+ notify_psy = power_supply_get_by_name(
+ bq->init_data.notify_device);
+ }
+ }
+ if (notify_psy) {
+ ret = power_supply_get_property(notify_psy,
+ POWER_SUPPLY_PROP_CURRENT_MAX, &prop);
+ power_supply_put(notify_psy);
+
+ if (ret == 0) {
+ bq2415x_update_reported_mode(bq, prop.intval);
+ bq2415x_set_mode(bq, bq->reported_mode);
+ }
+ }
+
+ INIT_DELAYED_WORK(&bq->work, bq2415x_timer_work);
+ bq2415x_set_autotimer(bq, 1);
+
+ dev_info(bq->dev, "driver registered\n");
+ return 0;
+
+error_3:
+ bq2415x_power_supply_exit(bq);
+error_2:
+ if (bq)
+ of_node_put(bq->notify_node);
+ kfree(name);
+error_1:
+ mutex_lock(&bq2415x_id_mutex);
+ idr_remove(&bq2415x_id, num);
+ mutex_unlock(&bq2415x_id_mutex);
+
+ return ret;
+}
+
+/* main bq2415x remove function */
+
+static int bq2415x_remove(struct i2c_client *client)
+{
+ struct bq2415x_device *bq = i2c_get_clientdata(client);
+
+ if (bq->nb.notifier_call)
+ power_supply_unreg_notifier(&bq->nb);
+
+ of_node_put(bq->notify_node);
+ bq2415x_power_supply_exit(bq);
+
+ bq2415x_reset_chip(bq);
+
+ mutex_lock(&bq2415x_id_mutex);
+ idr_remove(&bq2415x_id, bq->id);
+ mutex_unlock(&bq2415x_id_mutex);
+
+ dev_info(bq->dev, "driver unregistered\n");
+
+ kfree(bq->name);
+
+ return 0;
+}
+
+static const struct i2c_device_id bq2415x_i2c_id_table[] = {
+ { "bq2415x", BQUNKNOWN },
+ { "bq24150", BQ24150 },
+ { "bq24150a", BQ24150A },
+ { "bq24151", BQ24151 },
+ { "bq24151a", BQ24151A },
+ { "bq24152", BQ24152 },
+ { "bq24153", BQ24153 },
+ { "bq24153a", BQ24153A },
+ { "bq24155", BQ24155 },
+ { "bq24156", BQ24156 },
+ { "bq24156a", BQ24156A },
+ { "bq24157s", BQ24157S },
+ { "bq24158", BQ24158 },
+ {},
+};
+MODULE_DEVICE_TABLE(i2c, bq2415x_i2c_id_table);
+
+#ifdef CONFIG_ACPI
+static const struct acpi_device_id bq2415x_i2c_acpi_match[] = {
+ { "BQ2415X", BQUNKNOWN },
+ { "BQ241500", BQ24150 },
+ { "BQA24150", BQ24150A },
+ { "BQ241510", BQ24151 },
+ { "BQA24151", BQ24151A },
+ { "BQ241520", BQ24152 },
+ { "BQ241530", BQ24153 },
+ { "BQA24153", BQ24153A },
+ { "BQ241550", BQ24155 },
+ { "BQ241560", BQ24156 },
+ { "BQA24156", BQ24156A },
+ { "BQS24157", BQ24157S },
+ { "BQ241580", BQ24158 },
+ {},
+};
+MODULE_DEVICE_TABLE(acpi, bq2415x_i2c_acpi_match);
+#endif
+
+#ifdef CONFIG_OF
+static const struct of_device_id bq2415x_of_match_table[] = {
+ { .compatible = "ti,bq24150" },
+ { .compatible = "ti,bq24150a" },
+ { .compatible = "ti,bq24151" },
+ { .compatible = "ti,bq24151a" },
+ { .compatible = "ti,bq24152" },
+ { .compatible = "ti,bq24153" },
+ { .compatible = "ti,bq24153a" },
+ { .compatible = "ti,bq24155" },
+ { .compatible = "ti,bq24156" },
+ { .compatible = "ti,bq24156a" },
+ { .compatible = "ti,bq24157s" },
+ { .compatible = "ti,bq24158" },
+ {},
+};
+MODULE_DEVICE_TABLE(of, bq2415x_of_match_table);
+#endif
+
+static struct i2c_driver bq2415x_driver = {
+ .driver = {
+ .name = "bq2415x-charger",
+ .of_match_table = of_match_ptr(bq2415x_of_match_table),
+ .acpi_match_table = ACPI_PTR(bq2415x_i2c_acpi_match),
+ },
+ .probe = bq2415x_probe,
+ .remove = bq2415x_remove,
+ .id_table = bq2415x_i2c_id_table,
+};
+module_i2c_driver(bq2415x_driver);
+
+MODULE_AUTHOR("Pali Rohár <pali@kernel.org>");
+MODULE_DESCRIPTION("bq2415x charger driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/power/supply/bq24190_charger.c b/drivers/power/supply/bq24190_charger.c
new file mode 100644
index 000000000..5769b3685
--- /dev/null
+++ b/drivers/power/supply/bq24190_charger.c
@@ -0,0 +1,1988 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Driver for the TI bq24190 battery charger.
+ *
+ * Author: Mark A. Greer <mgreer@animalcreek.com>
+ */
+
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/of_irq.h>
+#include <linux/of_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/power_supply.h>
+#include <linux/power/bq24190_charger.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/machine.h>
+#include <linux/workqueue.h>
+#include <linux/gpio.h>
+#include <linux/i2c.h>
+#include <linux/extcon-provider.h>
+
+#define BQ24190_MANUFACTURER "Texas Instruments"
+
+#define BQ24190_REG_ISC 0x00 /* Input Source Control */
+#define BQ24190_REG_ISC_EN_HIZ_MASK BIT(7)
+#define BQ24190_REG_ISC_EN_HIZ_SHIFT 7
+#define BQ24190_REG_ISC_VINDPM_MASK (BIT(6) | BIT(5) | BIT(4) | \
+ BIT(3))
+#define BQ24190_REG_ISC_VINDPM_SHIFT 3
+#define BQ24190_REG_ISC_IINLIM_MASK (BIT(2) | BIT(1) | BIT(0))
+#define BQ24190_REG_ISC_IINLIM_SHIFT 0
+
+#define BQ24190_REG_POC 0x01 /* Power-On Configuration */
+#define BQ24190_REG_POC_RESET_MASK BIT(7)
+#define BQ24190_REG_POC_RESET_SHIFT 7
+#define BQ24190_REG_POC_WDT_RESET_MASK BIT(6)
+#define BQ24190_REG_POC_WDT_RESET_SHIFT 6
+#define BQ24190_REG_POC_CHG_CONFIG_MASK (BIT(5) | BIT(4))
+#define BQ24190_REG_POC_CHG_CONFIG_SHIFT 4
+#define BQ24190_REG_POC_CHG_CONFIG_DISABLE 0x0
+#define BQ24190_REG_POC_CHG_CONFIG_CHARGE 0x1
+#define BQ24190_REG_POC_CHG_CONFIG_OTG 0x2
+#define BQ24190_REG_POC_CHG_CONFIG_OTG_ALT 0x3
+#define BQ24190_REG_POC_SYS_MIN_MASK (BIT(3) | BIT(2) | BIT(1))
+#define BQ24190_REG_POC_SYS_MIN_SHIFT 1
+#define BQ24190_REG_POC_SYS_MIN_MIN 3000
+#define BQ24190_REG_POC_SYS_MIN_MAX 3700
+#define BQ24190_REG_POC_BOOST_LIM_MASK BIT(0)
+#define BQ24190_REG_POC_BOOST_LIM_SHIFT 0
+
+#define BQ24190_REG_CCC 0x02 /* Charge Current Control */
+#define BQ24190_REG_CCC_ICHG_MASK (BIT(7) | BIT(6) | BIT(5) | \
+ BIT(4) | BIT(3) | BIT(2))
+#define BQ24190_REG_CCC_ICHG_SHIFT 2
+#define BQ24190_REG_CCC_FORCE_20PCT_MASK BIT(0)
+#define BQ24190_REG_CCC_FORCE_20PCT_SHIFT 0
+
+#define BQ24190_REG_PCTCC 0x03 /* Pre-charge/Termination Current Cntl */
+#define BQ24190_REG_PCTCC_IPRECHG_MASK (BIT(7) | BIT(6) | BIT(5) | \
+ BIT(4))
+#define BQ24190_REG_PCTCC_IPRECHG_SHIFT 4
+#define BQ24190_REG_PCTCC_IPRECHG_MIN 128
+#define BQ24190_REG_PCTCC_IPRECHG_MAX 2048
+#define BQ24190_REG_PCTCC_ITERM_MASK (BIT(3) | BIT(2) | BIT(1) | \
+ BIT(0))
+#define BQ24190_REG_PCTCC_ITERM_SHIFT 0
+#define BQ24190_REG_PCTCC_ITERM_MIN 128
+#define BQ24190_REG_PCTCC_ITERM_MAX 2048
+
+#define BQ24190_REG_CVC 0x04 /* Charge Voltage Control */
+#define BQ24190_REG_CVC_VREG_MASK (BIT(7) | BIT(6) | BIT(5) | \
+ BIT(4) | BIT(3) | BIT(2))
+#define BQ24190_REG_CVC_VREG_SHIFT 2
+#define BQ24190_REG_CVC_BATLOWV_MASK BIT(1)
+#define BQ24190_REG_CVC_BATLOWV_SHIFT 1
+#define BQ24190_REG_CVC_VRECHG_MASK BIT(0)
+#define BQ24190_REG_CVC_VRECHG_SHIFT 0
+
+#define BQ24190_REG_CTTC 0x05 /* Charge Term/Timer Control */
+#define BQ24190_REG_CTTC_EN_TERM_MASK BIT(7)
+#define BQ24190_REG_CTTC_EN_TERM_SHIFT 7
+#define BQ24190_REG_CTTC_TERM_STAT_MASK BIT(6)
+#define BQ24190_REG_CTTC_TERM_STAT_SHIFT 6
+#define BQ24190_REG_CTTC_WATCHDOG_MASK (BIT(5) | BIT(4))
+#define BQ24190_REG_CTTC_WATCHDOG_SHIFT 4
+#define BQ24190_REG_CTTC_EN_TIMER_MASK BIT(3)
+#define BQ24190_REG_CTTC_EN_TIMER_SHIFT 3
+#define BQ24190_REG_CTTC_CHG_TIMER_MASK (BIT(2) | BIT(1))
+#define BQ24190_REG_CTTC_CHG_TIMER_SHIFT 1
+#define BQ24190_REG_CTTC_JEITA_ISET_MASK BIT(0)
+#define BQ24190_REG_CTTC_JEITA_ISET_SHIFT 0
+
+#define BQ24190_REG_ICTRC 0x06 /* IR Comp/Thermal Regulation Control */
+#define BQ24190_REG_ICTRC_BAT_COMP_MASK (BIT(7) | BIT(6) | BIT(5))
+#define BQ24190_REG_ICTRC_BAT_COMP_SHIFT 5
+#define BQ24190_REG_ICTRC_VCLAMP_MASK (BIT(4) | BIT(3) | BIT(2))
+#define BQ24190_REG_ICTRC_VCLAMP_SHIFT 2
+#define BQ24190_REG_ICTRC_TREG_MASK (BIT(1) | BIT(0))
+#define BQ24190_REG_ICTRC_TREG_SHIFT 0
+
+#define BQ24190_REG_MOC 0x07 /* Misc. Operation Control */
+#define BQ24190_REG_MOC_DPDM_EN_MASK BIT(7)
+#define BQ24190_REG_MOC_DPDM_EN_SHIFT 7
+#define BQ24190_REG_MOC_TMR2X_EN_MASK BIT(6)
+#define BQ24190_REG_MOC_TMR2X_EN_SHIFT 6
+#define BQ24190_REG_MOC_BATFET_DISABLE_MASK BIT(5)
+#define BQ24190_REG_MOC_BATFET_DISABLE_SHIFT 5
+#define BQ24190_REG_MOC_JEITA_VSET_MASK BIT(4)
+#define BQ24190_REG_MOC_JEITA_VSET_SHIFT 4
+#define BQ24190_REG_MOC_INT_MASK_MASK (BIT(1) | BIT(0))
+#define BQ24190_REG_MOC_INT_MASK_SHIFT 0
+
+#define BQ24190_REG_SS 0x08 /* System Status */
+#define BQ24190_REG_SS_VBUS_STAT_MASK (BIT(7) | BIT(6))
+#define BQ24190_REG_SS_VBUS_STAT_SHIFT 6
+#define BQ24190_REG_SS_CHRG_STAT_MASK (BIT(5) | BIT(4))
+#define BQ24190_REG_SS_CHRG_STAT_SHIFT 4
+#define BQ24190_REG_SS_DPM_STAT_MASK BIT(3)
+#define BQ24190_REG_SS_DPM_STAT_SHIFT 3
+#define BQ24190_REG_SS_PG_STAT_MASK BIT(2)
+#define BQ24190_REG_SS_PG_STAT_SHIFT 2
+#define BQ24190_REG_SS_THERM_STAT_MASK BIT(1)
+#define BQ24190_REG_SS_THERM_STAT_SHIFT 1
+#define BQ24190_REG_SS_VSYS_STAT_MASK BIT(0)
+#define BQ24190_REG_SS_VSYS_STAT_SHIFT 0
+
+#define BQ24190_REG_F 0x09 /* Fault */
+#define BQ24190_REG_F_WATCHDOG_FAULT_MASK BIT(7)
+#define BQ24190_REG_F_WATCHDOG_FAULT_SHIFT 7
+#define BQ24190_REG_F_BOOST_FAULT_MASK BIT(6)
+#define BQ24190_REG_F_BOOST_FAULT_SHIFT 6
+#define BQ24190_REG_F_CHRG_FAULT_MASK (BIT(5) | BIT(4))
+#define BQ24190_REG_F_CHRG_FAULT_SHIFT 4
+#define BQ24190_REG_F_BAT_FAULT_MASK BIT(3)
+#define BQ24190_REG_F_BAT_FAULT_SHIFT 3
+#define BQ24190_REG_F_NTC_FAULT_MASK (BIT(2) | BIT(1) | BIT(0))
+#define BQ24190_REG_F_NTC_FAULT_SHIFT 0
+
+#define BQ24190_REG_VPRS 0x0A /* Vendor/Part/Revision Status */
+#define BQ24190_REG_VPRS_PN_MASK (BIT(5) | BIT(4) | BIT(3))
+#define BQ24190_REG_VPRS_PN_SHIFT 3
+#define BQ24190_REG_VPRS_PN_24190 0x4
+#define BQ24190_REG_VPRS_PN_24192 0x5 /* Also 24193, 24196 */
+#define BQ24190_REG_VPRS_PN_24192I 0x3
+#define BQ24190_REG_VPRS_TS_PROFILE_MASK BIT(2)
+#define BQ24190_REG_VPRS_TS_PROFILE_SHIFT 2
+#define BQ24190_REG_VPRS_DEV_REG_MASK (BIT(1) | BIT(0))
+#define BQ24190_REG_VPRS_DEV_REG_SHIFT 0
+
+/*
+ * The FAULT register is latched by the bq24190 (except for NTC_FAULT)
+ * so the first read after a fault returns the latched value and subsequent
+ * reads return the current value. In order to return the fault status
+ * to the user, have the interrupt handler save the reg's value and retrieve
+ * it in the appropriate health/status routine.
+ */
+struct bq24190_dev_info {
+ struct i2c_client *client;
+ struct device *dev;
+ struct extcon_dev *edev;
+ struct power_supply *charger;
+ struct power_supply *battery;
+ struct delayed_work input_current_limit_work;
+ char model_name[I2C_NAME_SIZE];
+ bool initialized;
+ bool irq_event;
+ u16 sys_min;
+ u16 iprechg;
+ u16 iterm;
+ struct mutex f_reg_lock;
+ u8 f_reg;
+ u8 ss_reg;
+ u8 watchdog;
+};
+
+static const unsigned int bq24190_usb_extcon_cable[] = {
+ EXTCON_USB,
+ EXTCON_NONE,
+};
+
+/*
+ * The tables below provide a 2-way mapping for the value that goes in
+ * the register field and the real-world value that it represents.
+ * The index of the array is the value that goes in the register; the
+ * number at that index in the array is the real-world value that it
+ * represents.
+ */
+
+/* REG00[2:0] (IINLIM) in uAh */
+static const int bq24190_isc_iinlim_values[] = {
+ 100000, 150000, 500000, 900000, 1200000, 1500000, 2000000, 3000000
+};
+
+/* REG02[7:2] (ICHG) in uAh */
+static const int bq24190_ccc_ichg_values[] = {
+ 512000, 576000, 640000, 704000, 768000, 832000, 896000, 960000,
+ 1024000, 1088000, 1152000, 1216000, 1280000, 1344000, 1408000, 1472000,
+ 1536000, 1600000, 1664000, 1728000, 1792000, 1856000, 1920000, 1984000,
+ 2048000, 2112000, 2176000, 2240000, 2304000, 2368000, 2432000, 2496000,
+ 2560000, 2624000, 2688000, 2752000, 2816000, 2880000, 2944000, 3008000,
+ 3072000, 3136000, 3200000, 3264000, 3328000, 3392000, 3456000, 3520000,
+ 3584000, 3648000, 3712000, 3776000, 3840000, 3904000, 3968000, 4032000,
+ 4096000, 4160000, 4224000, 4288000, 4352000, 4416000, 4480000, 4544000
+};
+
+/* REG04[7:2] (VREG) in uV */
+static const int bq24190_cvc_vreg_values[] = {
+ 3504000, 3520000, 3536000, 3552000, 3568000, 3584000, 3600000, 3616000,
+ 3632000, 3648000, 3664000, 3680000, 3696000, 3712000, 3728000, 3744000,
+ 3760000, 3776000, 3792000, 3808000, 3824000, 3840000, 3856000, 3872000,
+ 3888000, 3904000, 3920000, 3936000, 3952000, 3968000, 3984000, 4000000,
+ 4016000, 4032000, 4048000, 4064000, 4080000, 4096000, 4112000, 4128000,
+ 4144000, 4160000, 4176000, 4192000, 4208000, 4224000, 4240000, 4256000,
+ 4272000, 4288000, 4304000, 4320000, 4336000, 4352000, 4368000, 4384000,
+ 4400000
+};
+
+/* REG06[1:0] (TREG) in tenths of degrees Celsius */
+static const int bq24190_ictrc_treg_values[] = {
+ 600, 800, 1000, 1200
+};
+
+/*
+ * Return the index in 'tbl' of greatest value that is less than or equal to
+ * 'val'. The index range returned is 0 to 'tbl_size' - 1. Assumes that
+ * the values in 'tbl' are sorted from smallest to largest and 'tbl_size'
+ * is less than 2^8.
+ */
+static u8 bq24190_find_idx(const int tbl[], int tbl_size, int v)
+{
+ int i;
+
+ for (i = 1; i < tbl_size; i++)
+ if (v < tbl[i])
+ break;
+
+ return i - 1;
+}
+
+/* Basic driver I/O routines */
+
+static int bq24190_read(struct bq24190_dev_info *bdi, u8 reg, u8 *data)
+{
+ int ret;
+
+ ret = i2c_smbus_read_byte_data(bdi->client, reg);
+ if (ret < 0)
+ return ret;
+
+ *data = ret;
+ return 0;
+}
+
+static int bq24190_write(struct bq24190_dev_info *bdi, u8 reg, u8 data)
+{
+ return i2c_smbus_write_byte_data(bdi->client, reg, data);
+}
+
+static int bq24190_read_mask(struct bq24190_dev_info *bdi, u8 reg,
+ u8 mask, u8 shift, u8 *data)
+{
+ u8 v;
+ int ret;
+
+ ret = bq24190_read(bdi, reg, &v);
+ if (ret < 0)
+ return ret;
+
+ v &= mask;
+ v >>= shift;
+ *data = v;
+
+ return 0;
+}
+
+static int bq24190_write_mask(struct bq24190_dev_info *bdi, u8 reg,
+ u8 mask, u8 shift, u8 data)
+{
+ u8 v;
+ int ret;
+
+ ret = bq24190_read(bdi, reg, &v);
+ if (ret < 0)
+ return ret;
+
+ v &= ~mask;
+ v |= ((data << shift) & mask);
+
+ return bq24190_write(bdi, reg, v);
+}
+
+static int bq24190_get_field_val(struct bq24190_dev_info *bdi,
+ u8 reg, u8 mask, u8 shift,
+ const int tbl[], int tbl_size,
+ int *val)
+{
+ u8 v;
+ int ret;
+
+ ret = bq24190_read_mask(bdi, reg, mask, shift, &v);
+ if (ret < 0)
+ return ret;
+
+ v = (v >= tbl_size) ? (tbl_size - 1) : v;
+ *val = tbl[v];
+
+ return 0;
+}
+
+static int bq24190_set_field_val(struct bq24190_dev_info *bdi,
+ u8 reg, u8 mask, u8 shift,
+ const int tbl[], int tbl_size,
+ int val)
+{
+ u8 idx;
+
+ idx = bq24190_find_idx(tbl, tbl_size, val);
+
+ return bq24190_write_mask(bdi, reg, mask, shift, idx);
+}
+
+#ifdef CONFIG_SYSFS
+/*
+ * There are a numerous options that are configurable on the bq24190
+ * that go well beyond what the power_supply properties provide access to.
+ * Provide sysfs access to them so they can be examined and possibly modified
+ * on the fly. They will be provided for the charger power_supply object only
+ * and will be prefixed by 'f_' to make them easier to recognize.
+ */
+
+#define BQ24190_SYSFS_FIELD(_name, r, f, m, store) \
+{ \
+ .attr = __ATTR(f_##_name, m, bq24190_sysfs_show, store), \
+ .reg = BQ24190_REG_##r, \
+ .mask = BQ24190_REG_##r##_##f##_MASK, \
+ .shift = BQ24190_REG_##r##_##f##_SHIFT, \
+}
+
+#define BQ24190_SYSFS_FIELD_RW(_name, r, f) \
+ BQ24190_SYSFS_FIELD(_name, r, f, S_IWUSR | S_IRUGO, \
+ bq24190_sysfs_store)
+
+#define BQ24190_SYSFS_FIELD_RO(_name, r, f) \
+ BQ24190_SYSFS_FIELD(_name, r, f, S_IRUGO, NULL)
+
+static ssize_t bq24190_sysfs_show(struct device *dev,
+ struct device_attribute *attr, char *buf);
+static ssize_t bq24190_sysfs_store(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t count);
+
+struct bq24190_sysfs_field_info {
+ struct device_attribute attr;
+ u8 reg;
+ u8 mask;
+ u8 shift;
+};
+
+/* On i386 ptrace-abi.h defines SS that breaks the macro calls below. */
+#undef SS
+
+static struct bq24190_sysfs_field_info bq24190_sysfs_field_tbl[] = {
+ /* sysfs name reg field in reg */
+ BQ24190_SYSFS_FIELD_RW(en_hiz, ISC, EN_HIZ),
+ BQ24190_SYSFS_FIELD_RW(vindpm, ISC, VINDPM),
+ BQ24190_SYSFS_FIELD_RW(iinlim, ISC, IINLIM),
+ BQ24190_SYSFS_FIELD_RW(chg_config, POC, CHG_CONFIG),
+ BQ24190_SYSFS_FIELD_RW(sys_min, POC, SYS_MIN),
+ BQ24190_SYSFS_FIELD_RW(boost_lim, POC, BOOST_LIM),
+ BQ24190_SYSFS_FIELD_RW(ichg, CCC, ICHG),
+ BQ24190_SYSFS_FIELD_RW(force_20_pct, CCC, FORCE_20PCT),
+ BQ24190_SYSFS_FIELD_RW(iprechg, PCTCC, IPRECHG),
+ BQ24190_SYSFS_FIELD_RW(iterm, PCTCC, ITERM),
+ BQ24190_SYSFS_FIELD_RW(vreg, CVC, VREG),
+ BQ24190_SYSFS_FIELD_RW(batlowv, CVC, BATLOWV),
+ BQ24190_SYSFS_FIELD_RW(vrechg, CVC, VRECHG),
+ BQ24190_SYSFS_FIELD_RW(en_term, CTTC, EN_TERM),
+ BQ24190_SYSFS_FIELD_RW(term_stat, CTTC, TERM_STAT),
+ BQ24190_SYSFS_FIELD_RO(watchdog, CTTC, WATCHDOG),
+ BQ24190_SYSFS_FIELD_RW(en_timer, CTTC, EN_TIMER),
+ BQ24190_SYSFS_FIELD_RW(chg_timer, CTTC, CHG_TIMER),
+ BQ24190_SYSFS_FIELD_RW(jeta_iset, CTTC, JEITA_ISET),
+ BQ24190_SYSFS_FIELD_RW(bat_comp, ICTRC, BAT_COMP),
+ BQ24190_SYSFS_FIELD_RW(vclamp, ICTRC, VCLAMP),
+ BQ24190_SYSFS_FIELD_RW(treg, ICTRC, TREG),
+ BQ24190_SYSFS_FIELD_RW(dpdm_en, MOC, DPDM_EN),
+ BQ24190_SYSFS_FIELD_RW(tmr2x_en, MOC, TMR2X_EN),
+ BQ24190_SYSFS_FIELD_RW(batfet_disable, MOC, BATFET_DISABLE),
+ BQ24190_SYSFS_FIELD_RW(jeita_vset, MOC, JEITA_VSET),
+ BQ24190_SYSFS_FIELD_RO(int_mask, MOC, INT_MASK),
+ BQ24190_SYSFS_FIELD_RO(vbus_stat, SS, VBUS_STAT),
+ BQ24190_SYSFS_FIELD_RO(chrg_stat, SS, CHRG_STAT),
+ BQ24190_SYSFS_FIELD_RO(dpm_stat, SS, DPM_STAT),
+ BQ24190_SYSFS_FIELD_RO(pg_stat, SS, PG_STAT),
+ BQ24190_SYSFS_FIELD_RO(therm_stat, SS, THERM_STAT),
+ BQ24190_SYSFS_FIELD_RO(vsys_stat, SS, VSYS_STAT),
+ BQ24190_SYSFS_FIELD_RO(watchdog_fault, F, WATCHDOG_FAULT),
+ BQ24190_SYSFS_FIELD_RO(boost_fault, F, BOOST_FAULT),
+ BQ24190_SYSFS_FIELD_RO(chrg_fault, F, CHRG_FAULT),
+ BQ24190_SYSFS_FIELD_RO(bat_fault, F, BAT_FAULT),
+ BQ24190_SYSFS_FIELD_RO(ntc_fault, F, NTC_FAULT),
+ BQ24190_SYSFS_FIELD_RO(pn, VPRS, PN),
+ BQ24190_SYSFS_FIELD_RO(ts_profile, VPRS, TS_PROFILE),
+ BQ24190_SYSFS_FIELD_RO(dev_reg, VPRS, DEV_REG),
+};
+
+static struct attribute *
+ bq24190_sysfs_attrs[ARRAY_SIZE(bq24190_sysfs_field_tbl) + 1];
+
+ATTRIBUTE_GROUPS(bq24190_sysfs);
+
+static void bq24190_sysfs_init_attrs(void)
+{
+ int i, limit = ARRAY_SIZE(bq24190_sysfs_field_tbl);
+
+ for (i = 0; i < limit; i++)
+ bq24190_sysfs_attrs[i] = &bq24190_sysfs_field_tbl[i].attr.attr;
+
+ bq24190_sysfs_attrs[limit] = NULL; /* Has additional entry for this */
+}
+
+static struct bq24190_sysfs_field_info *bq24190_sysfs_field_lookup(
+ const char *name)
+{
+ int i, limit = ARRAY_SIZE(bq24190_sysfs_field_tbl);
+
+ for (i = 0; i < limit; i++)
+ if (!strcmp(name, bq24190_sysfs_field_tbl[i].attr.attr.name))
+ break;
+
+ if (i >= limit)
+ return NULL;
+
+ return &bq24190_sysfs_field_tbl[i];
+}
+
+static ssize_t bq24190_sysfs_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct power_supply *psy = dev_get_drvdata(dev);
+ struct bq24190_dev_info *bdi = power_supply_get_drvdata(psy);
+ struct bq24190_sysfs_field_info *info;
+ ssize_t count;
+ int ret;
+ u8 v;
+
+ info = bq24190_sysfs_field_lookup(attr->attr.name);
+ if (!info)
+ return -EINVAL;
+
+ ret = pm_runtime_resume_and_get(bdi->dev);
+ if (ret < 0)
+ return ret;
+
+ ret = bq24190_read_mask(bdi, info->reg, info->mask, info->shift, &v);
+ if (ret)
+ count = ret;
+ else
+ count = scnprintf(buf, PAGE_SIZE, "%hhx\n", v);
+
+ pm_runtime_mark_last_busy(bdi->dev);
+ pm_runtime_put_autosuspend(bdi->dev);
+
+ return count;
+}
+
+static ssize_t bq24190_sysfs_store(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t count)
+{
+ struct power_supply *psy = dev_get_drvdata(dev);
+ struct bq24190_dev_info *bdi = power_supply_get_drvdata(psy);
+ struct bq24190_sysfs_field_info *info;
+ int ret;
+ u8 v;
+
+ info = bq24190_sysfs_field_lookup(attr->attr.name);
+ if (!info)
+ return -EINVAL;
+
+ ret = kstrtou8(buf, 0, &v);
+ if (ret < 0)
+ return ret;
+
+ ret = pm_runtime_resume_and_get(bdi->dev);
+ if (ret < 0)
+ return ret;
+
+ ret = bq24190_write_mask(bdi, info->reg, info->mask, info->shift, v);
+ if (ret)
+ count = ret;
+
+ pm_runtime_mark_last_busy(bdi->dev);
+ pm_runtime_put_autosuspend(bdi->dev);
+
+ return count;
+}
+#endif
+
+#ifdef CONFIG_REGULATOR
+static int bq24190_set_charge_mode(struct regulator_dev *dev, u8 val)
+{
+ struct bq24190_dev_info *bdi = rdev_get_drvdata(dev);
+ int ret;
+
+ ret = pm_runtime_resume_and_get(bdi->dev);
+ if (ret < 0) {
+ dev_warn(bdi->dev, "pm_runtime_get failed: %i\n", ret);
+ return ret;
+ }
+
+ ret = bq24190_write_mask(bdi, BQ24190_REG_POC,
+ BQ24190_REG_POC_CHG_CONFIG_MASK,
+ BQ24190_REG_POC_CHG_CONFIG_SHIFT, val);
+
+ pm_runtime_mark_last_busy(bdi->dev);
+ pm_runtime_put_autosuspend(bdi->dev);
+
+ return ret;
+}
+
+static int bq24190_vbus_enable(struct regulator_dev *dev)
+{
+ return bq24190_set_charge_mode(dev, BQ24190_REG_POC_CHG_CONFIG_OTG);
+}
+
+static int bq24190_vbus_disable(struct regulator_dev *dev)
+{
+ return bq24190_set_charge_mode(dev, BQ24190_REG_POC_CHG_CONFIG_CHARGE);
+}
+
+static int bq24190_vbus_is_enabled(struct regulator_dev *dev)
+{
+ struct bq24190_dev_info *bdi = rdev_get_drvdata(dev);
+ int ret;
+ u8 val;
+
+ ret = pm_runtime_resume_and_get(bdi->dev);
+ if (ret < 0) {
+ dev_warn(bdi->dev, "pm_runtime_get failed: %i\n", ret);
+ return ret;
+ }
+
+ ret = bq24190_read_mask(bdi, BQ24190_REG_POC,
+ BQ24190_REG_POC_CHG_CONFIG_MASK,
+ BQ24190_REG_POC_CHG_CONFIG_SHIFT, &val);
+
+ pm_runtime_mark_last_busy(bdi->dev);
+ pm_runtime_put_autosuspend(bdi->dev);
+
+ if (ret)
+ return ret;
+
+ return (val == BQ24190_REG_POC_CHG_CONFIG_OTG ||
+ val == BQ24190_REG_POC_CHG_CONFIG_OTG_ALT);
+}
+
+static const struct regulator_ops bq24190_vbus_ops = {
+ .enable = bq24190_vbus_enable,
+ .disable = bq24190_vbus_disable,
+ .is_enabled = bq24190_vbus_is_enabled,
+};
+
+static const struct regulator_desc bq24190_vbus_desc = {
+ .name = "usb_otg_vbus",
+ .of_match = "usb-otg-vbus",
+ .type = REGULATOR_VOLTAGE,
+ .owner = THIS_MODULE,
+ .ops = &bq24190_vbus_ops,
+ .fixed_uV = 5000000,
+ .n_voltages = 1,
+};
+
+static const struct regulator_init_data bq24190_vbus_init_data = {
+ .constraints = {
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ },
+};
+
+static int bq24190_register_vbus_regulator(struct bq24190_dev_info *bdi)
+{
+ struct bq24190_platform_data *pdata = bdi->dev->platform_data;
+ struct regulator_config cfg = { };
+ struct regulator_dev *reg;
+ int ret = 0;
+
+ cfg.dev = bdi->dev;
+ if (pdata && pdata->regulator_init_data)
+ cfg.init_data = pdata->regulator_init_data;
+ else
+ cfg.init_data = &bq24190_vbus_init_data;
+ cfg.driver_data = bdi;
+ reg = devm_regulator_register(bdi->dev, &bq24190_vbus_desc, &cfg);
+ if (IS_ERR(reg)) {
+ ret = PTR_ERR(reg);
+ dev_err(bdi->dev, "Can't register regulator: %d\n", ret);
+ }
+
+ return ret;
+}
+#else
+static int bq24190_register_vbus_regulator(struct bq24190_dev_info *bdi)
+{
+ return 0;
+}
+#endif
+
+static int bq24190_set_config(struct bq24190_dev_info *bdi)
+{
+ int ret;
+ u8 v;
+
+ ret = bq24190_read(bdi, BQ24190_REG_CTTC, &v);
+ if (ret < 0)
+ return ret;
+
+ bdi->watchdog = ((v & BQ24190_REG_CTTC_WATCHDOG_MASK) >>
+ BQ24190_REG_CTTC_WATCHDOG_SHIFT);
+
+ /*
+ * According to the "Host Mode and default Mode" section of the
+ * manual, a write to any register causes the bq24190 to switch
+ * from default mode to host mode. It will switch back to default
+ * mode after a WDT timeout unless the WDT is turned off as well.
+ * So, by simply turning off the WDT, we accomplish both with the
+ * same write.
+ */
+ v &= ~BQ24190_REG_CTTC_WATCHDOG_MASK;
+
+ ret = bq24190_write(bdi, BQ24190_REG_CTTC, v);
+ if (ret < 0)
+ return ret;
+
+ if (bdi->sys_min) {
+ v = bdi->sys_min / 100 - 30; // manual section 9.5.1.2, table 9
+ ret = bq24190_write_mask(bdi, BQ24190_REG_POC,
+ BQ24190_REG_POC_SYS_MIN_MASK,
+ BQ24190_REG_POC_SYS_MIN_SHIFT,
+ v);
+ if (ret < 0)
+ return ret;
+ }
+
+ if (bdi->iprechg) {
+ v = bdi->iprechg / 128 - 1; // manual section 9.5.1.4, table 11
+ ret = bq24190_write_mask(bdi, BQ24190_REG_PCTCC,
+ BQ24190_REG_PCTCC_IPRECHG_MASK,
+ BQ24190_REG_PCTCC_IPRECHG_SHIFT,
+ v);
+ if (ret < 0)
+ return ret;
+ }
+
+ if (bdi->iterm) {
+ v = bdi->iterm / 128 - 1; // manual section 9.5.1.4, table 11
+ ret = bq24190_write_mask(bdi, BQ24190_REG_PCTCC,
+ BQ24190_REG_PCTCC_ITERM_MASK,
+ BQ24190_REG_PCTCC_ITERM_SHIFT,
+ v);
+ if (ret < 0)
+ return ret;
+ }
+
+ return 0;
+}
+
+static int bq24190_register_reset(struct bq24190_dev_info *bdi)
+{
+ int ret, limit = 100;
+ u8 v;
+
+ /*
+ * This prop. can be passed on device instantiation from platform code:
+ * struct property_entry pe[] =
+ * { PROPERTY_ENTRY_BOOL("disable-reset"), ... };
+ * struct i2c_board_info bi =
+ * { .type = "bq24190", .addr = 0x6b, .properties = pe, .irq = irq };
+ * struct i2c_adapter ad = { ... };
+ * i2c_add_adapter(&ad);
+ * i2c_new_client_device(&ad, &bi);
+ */
+ if (device_property_read_bool(bdi->dev, "disable-reset"))
+ return 0;
+
+ /* Reset the registers */
+ ret = bq24190_write_mask(bdi, BQ24190_REG_POC,
+ BQ24190_REG_POC_RESET_MASK,
+ BQ24190_REG_POC_RESET_SHIFT,
+ 0x1);
+ if (ret < 0)
+ return ret;
+
+ /* Reset bit will be cleared by hardware so poll until it is */
+ do {
+ ret = bq24190_read_mask(bdi, BQ24190_REG_POC,
+ BQ24190_REG_POC_RESET_MASK,
+ BQ24190_REG_POC_RESET_SHIFT,
+ &v);
+ if (ret < 0)
+ return ret;
+
+ if (v == 0)
+ return 0;
+
+ usleep_range(100, 200);
+ } while (--limit);
+
+ return -EIO;
+}
+
+/* Charger power supply property routines */
+
+static int bq24190_charger_get_charge_type(struct bq24190_dev_info *bdi,
+ union power_supply_propval *val)
+{
+ u8 v;
+ int type, ret;
+
+ ret = bq24190_read_mask(bdi, BQ24190_REG_POC,
+ BQ24190_REG_POC_CHG_CONFIG_MASK,
+ BQ24190_REG_POC_CHG_CONFIG_SHIFT,
+ &v);
+ if (ret < 0)
+ return ret;
+
+ /* If POC[CHG_CONFIG] (REG01[5:4]) == 0, charge is disabled */
+ if (!v) {
+ type = POWER_SUPPLY_CHARGE_TYPE_NONE;
+ } else {
+ ret = bq24190_read_mask(bdi, BQ24190_REG_CCC,
+ BQ24190_REG_CCC_FORCE_20PCT_MASK,
+ BQ24190_REG_CCC_FORCE_20PCT_SHIFT,
+ &v);
+ if (ret < 0)
+ return ret;
+
+ type = (v) ? POWER_SUPPLY_CHARGE_TYPE_TRICKLE :
+ POWER_SUPPLY_CHARGE_TYPE_FAST;
+ }
+
+ val->intval = type;
+
+ return 0;
+}
+
+static int bq24190_charger_set_charge_type(struct bq24190_dev_info *bdi,
+ const union power_supply_propval *val)
+{
+ u8 chg_config, force_20pct, en_term;
+ int ret;
+
+ /*
+ * According to the "Termination when REG02[0] = 1" section of
+ * the bq24190 manual, the trickle charge could be less than the
+ * termination current so it recommends turning off the termination
+ * function.
+ *
+ * Note: AFAICT from the datasheet, the user will have to manually
+ * turn off the charging when in 20% mode. If its not turned off,
+ * there could be battery damage. So, use this mode at your own risk.
+ */
+ switch (val->intval) {
+ case POWER_SUPPLY_CHARGE_TYPE_NONE:
+ chg_config = 0x0;
+ break;
+ case POWER_SUPPLY_CHARGE_TYPE_TRICKLE:
+ chg_config = 0x1;
+ force_20pct = 0x1;
+ en_term = 0x0;
+ break;
+ case POWER_SUPPLY_CHARGE_TYPE_FAST:
+ chg_config = 0x1;
+ force_20pct = 0x0;
+ en_term = 0x1;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ if (chg_config) { /* Enabling the charger */
+ ret = bq24190_write_mask(bdi, BQ24190_REG_CCC,
+ BQ24190_REG_CCC_FORCE_20PCT_MASK,
+ BQ24190_REG_CCC_FORCE_20PCT_SHIFT,
+ force_20pct);
+ if (ret < 0)
+ return ret;
+
+ ret = bq24190_write_mask(bdi, BQ24190_REG_CTTC,
+ BQ24190_REG_CTTC_EN_TERM_MASK,
+ BQ24190_REG_CTTC_EN_TERM_SHIFT,
+ en_term);
+ if (ret < 0)
+ return ret;
+ }
+
+ return bq24190_write_mask(bdi, BQ24190_REG_POC,
+ BQ24190_REG_POC_CHG_CONFIG_MASK,
+ BQ24190_REG_POC_CHG_CONFIG_SHIFT, chg_config);
+}
+
+static int bq24190_charger_get_health(struct bq24190_dev_info *bdi,
+ union power_supply_propval *val)
+{
+ u8 v;
+ int health;
+
+ mutex_lock(&bdi->f_reg_lock);
+ v = bdi->f_reg;
+ mutex_unlock(&bdi->f_reg_lock);
+
+ if (v & BQ24190_REG_F_NTC_FAULT_MASK) {
+ switch (v >> BQ24190_REG_F_NTC_FAULT_SHIFT & 0x7) {
+ case 0x1: /* TS1 Cold */
+ case 0x3: /* TS2 Cold */
+ case 0x5: /* Both Cold */
+ health = POWER_SUPPLY_HEALTH_COLD;
+ break;
+ case 0x2: /* TS1 Hot */
+ case 0x4: /* TS2 Hot */
+ case 0x6: /* Both Hot */
+ health = POWER_SUPPLY_HEALTH_OVERHEAT;
+ break;
+ default:
+ health = POWER_SUPPLY_HEALTH_UNKNOWN;
+ }
+ } else if (v & BQ24190_REG_F_BAT_FAULT_MASK) {
+ health = POWER_SUPPLY_HEALTH_OVERVOLTAGE;
+ } else if (v & BQ24190_REG_F_CHRG_FAULT_MASK) {
+ switch (v >> BQ24190_REG_F_CHRG_FAULT_SHIFT & 0x3) {
+ case 0x1: /* Input Fault (VBUS OVP or VBAT<VBUS<3.8V) */
+ /*
+ * This could be over-voltage or under-voltage
+ * and there's no way to tell which. Instead
+ * of looking foolish and returning 'OVERVOLTAGE'
+ * when its really under-voltage, just return
+ * 'UNSPEC_FAILURE'.
+ */
+ health = POWER_SUPPLY_HEALTH_UNSPEC_FAILURE;
+ break;
+ case 0x2: /* Thermal Shutdown */
+ health = POWER_SUPPLY_HEALTH_OVERHEAT;
+ break;
+ case 0x3: /* Charge Safety Timer Expiration */
+ health = POWER_SUPPLY_HEALTH_SAFETY_TIMER_EXPIRE;
+ break;
+ default: /* prevent compiler warning */
+ health = -1;
+ }
+ } else if (v & BQ24190_REG_F_BOOST_FAULT_MASK) {
+ /*
+ * This could be over-current or over-voltage but there's
+ * no way to tell which. Return 'OVERVOLTAGE' since there
+ * isn't an 'OVERCURRENT' value defined that we can return
+ * even if it was over-current.
+ */
+ health = POWER_SUPPLY_HEALTH_OVERVOLTAGE;
+ } else {
+ health = POWER_SUPPLY_HEALTH_GOOD;
+ }
+
+ val->intval = health;
+
+ return 0;
+}
+
+static int bq24190_charger_get_online(struct bq24190_dev_info *bdi,
+ union power_supply_propval *val)
+{
+ u8 pg_stat, batfet_disable;
+ int ret;
+
+ ret = bq24190_read_mask(bdi, BQ24190_REG_SS,
+ BQ24190_REG_SS_PG_STAT_MASK,
+ BQ24190_REG_SS_PG_STAT_SHIFT, &pg_stat);
+ if (ret < 0)
+ return ret;
+
+ ret = bq24190_read_mask(bdi, BQ24190_REG_MOC,
+ BQ24190_REG_MOC_BATFET_DISABLE_MASK,
+ BQ24190_REG_MOC_BATFET_DISABLE_SHIFT, &batfet_disable);
+ if (ret < 0)
+ return ret;
+
+ val->intval = pg_stat && !batfet_disable;
+
+ return 0;
+}
+
+static int bq24190_battery_set_online(struct bq24190_dev_info *bdi,
+ const union power_supply_propval *val);
+static int bq24190_battery_get_status(struct bq24190_dev_info *bdi,
+ union power_supply_propval *val);
+static int bq24190_battery_get_temp_alert_max(struct bq24190_dev_info *bdi,
+ union power_supply_propval *val);
+static int bq24190_battery_set_temp_alert_max(struct bq24190_dev_info *bdi,
+ const union power_supply_propval *val);
+
+static int bq24190_charger_set_online(struct bq24190_dev_info *bdi,
+ const union power_supply_propval *val)
+{
+ return bq24190_battery_set_online(bdi, val);
+}
+
+static int bq24190_charger_get_status(struct bq24190_dev_info *bdi,
+ union power_supply_propval *val)
+{
+ return bq24190_battery_get_status(bdi, val);
+}
+
+static int bq24190_charger_get_temp_alert_max(struct bq24190_dev_info *bdi,
+ union power_supply_propval *val)
+{
+ return bq24190_battery_get_temp_alert_max(bdi, val);
+}
+
+static int bq24190_charger_set_temp_alert_max(struct bq24190_dev_info *bdi,
+ const union power_supply_propval *val)
+{
+ return bq24190_battery_set_temp_alert_max(bdi, val);
+}
+
+static int bq24190_charger_get_precharge(struct bq24190_dev_info *bdi,
+ union power_supply_propval *val)
+{
+ u8 v;
+ int ret;
+
+ ret = bq24190_read_mask(bdi, BQ24190_REG_PCTCC,
+ BQ24190_REG_PCTCC_IPRECHG_MASK,
+ BQ24190_REG_PCTCC_IPRECHG_SHIFT, &v);
+ if (ret < 0)
+ return ret;
+
+ val->intval = ++v * 128 * 1000;
+ return 0;
+}
+
+static int bq24190_charger_get_charge_term(struct bq24190_dev_info *bdi,
+ union power_supply_propval *val)
+{
+ u8 v;
+ int ret;
+
+ ret = bq24190_read_mask(bdi, BQ24190_REG_PCTCC,
+ BQ24190_REG_PCTCC_ITERM_MASK,
+ BQ24190_REG_PCTCC_ITERM_SHIFT, &v);
+ if (ret < 0)
+ return ret;
+
+ val->intval = ++v * 128 * 1000;
+ return 0;
+}
+
+static int bq24190_charger_get_current(struct bq24190_dev_info *bdi,
+ union power_supply_propval *val)
+{
+ u8 v;
+ int curr, ret;
+
+ ret = bq24190_get_field_val(bdi, BQ24190_REG_CCC,
+ BQ24190_REG_CCC_ICHG_MASK, BQ24190_REG_CCC_ICHG_SHIFT,
+ bq24190_ccc_ichg_values,
+ ARRAY_SIZE(bq24190_ccc_ichg_values), &curr);
+ if (ret < 0)
+ return ret;
+
+ ret = bq24190_read_mask(bdi, BQ24190_REG_CCC,
+ BQ24190_REG_CCC_FORCE_20PCT_MASK,
+ BQ24190_REG_CCC_FORCE_20PCT_SHIFT, &v);
+ if (ret < 0)
+ return ret;
+
+ /* If FORCE_20PCT is enabled, then current is 20% of ICHG value */
+ if (v)
+ curr /= 5;
+
+ val->intval = curr;
+ return 0;
+}
+
+static int bq24190_charger_get_current_max(struct bq24190_dev_info *bdi,
+ union power_supply_propval *val)
+{
+ int idx = ARRAY_SIZE(bq24190_ccc_ichg_values) - 1;
+
+ val->intval = bq24190_ccc_ichg_values[idx];
+ return 0;
+}
+
+static int bq24190_charger_set_current(struct bq24190_dev_info *bdi,
+ const union power_supply_propval *val)
+{
+ u8 v;
+ int ret, curr = val->intval;
+
+ ret = bq24190_read_mask(bdi, BQ24190_REG_CCC,
+ BQ24190_REG_CCC_FORCE_20PCT_MASK,
+ BQ24190_REG_CCC_FORCE_20PCT_SHIFT, &v);
+ if (ret < 0)
+ return ret;
+
+ /* If FORCE_20PCT is enabled, have to multiply value passed in by 5 */
+ if (v)
+ curr *= 5;
+
+ return bq24190_set_field_val(bdi, BQ24190_REG_CCC,
+ BQ24190_REG_CCC_ICHG_MASK, BQ24190_REG_CCC_ICHG_SHIFT,
+ bq24190_ccc_ichg_values,
+ ARRAY_SIZE(bq24190_ccc_ichg_values), curr);
+}
+
+static int bq24190_charger_get_voltage(struct bq24190_dev_info *bdi,
+ union power_supply_propval *val)
+{
+ int voltage, ret;
+
+ ret = bq24190_get_field_val(bdi, BQ24190_REG_CVC,
+ BQ24190_REG_CVC_VREG_MASK, BQ24190_REG_CVC_VREG_SHIFT,
+ bq24190_cvc_vreg_values,
+ ARRAY_SIZE(bq24190_cvc_vreg_values), &voltage);
+ if (ret < 0)
+ return ret;
+
+ val->intval = voltage;
+ return 0;
+}
+
+static int bq24190_charger_get_voltage_max(struct bq24190_dev_info *bdi,
+ union power_supply_propval *val)
+{
+ int idx = ARRAY_SIZE(bq24190_cvc_vreg_values) - 1;
+
+ val->intval = bq24190_cvc_vreg_values[idx];
+ return 0;
+}
+
+static int bq24190_charger_set_voltage(struct bq24190_dev_info *bdi,
+ const union power_supply_propval *val)
+{
+ return bq24190_set_field_val(bdi, BQ24190_REG_CVC,
+ BQ24190_REG_CVC_VREG_MASK, BQ24190_REG_CVC_VREG_SHIFT,
+ bq24190_cvc_vreg_values,
+ ARRAY_SIZE(bq24190_cvc_vreg_values), val->intval);
+}
+
+static int bq24190_charger_get_iinlimit(struct bq24190_dev_info *bdi,
+ union power_supply_propval *val)
+{
+ int iinlimit, ret;
+
+ ret = bq24190_get_field_val(bdi, BQ24190_REG_ISC,
+ BQ24190_REG_ISC_IINLIM_MASK,
+ BQ24190_REG_ISC_IINLIM_SHIFT,
+ bq24190_isc_iinlim_values,
+ ARRAY_SIZE(bq24190_isc_iinlim_values), &iinlimit);
+ if (ret < 0)
+ return ret;
+
+ val->intval = iinlimit;
+ return 0;
+}
+
+static int bq24190_charger_set_iinlimit(struct bq24190_dev_info *bdi,
+ const union power_supply_propval *val)
+{
+ return bq24190_set_field_val(bdi, BQ24190_REG_ISC,
+ BQ24190_REG_ISC_IINLIM_MASK,
+ BQ24190_REG_ISC_IINLIM_SHIFT,
+ bq24190_isc_iinlim_values,
+ ARRAY_SIZE(bq24190_isc_iinlim_values), val->intval);
+}
+
+static int bq24190_charger_get_property(struct power_supply *psy,
+ enum power_supply_property psp, union power_supply_propval *val)
+{
+ struct bq24190_dev_info *bdi = power_supply_get_drvdata(psy);
+ int ret;
+
+ dev_dbg(bdi->dev, "prop: %d\n", psp);
+
+ ret = pm_runtime_resume_and_get(bdi->dev);
+ if (ret < 0)
+ return ret;
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_CHARGE_TYPE:
+ ret = bq24190_charger_get_charge_type(bdi, val);
+ break;
+ case POWER_SUPPLY_PROP_HEALTH:
+ ret = bq24190_charger_get_health(bdi, val);
+ break;
+ case POWER_SUPPLY_PROP_ONLINE:
+ ret = bq24190_charger_get_online(bdi, val);
+ break;
+ case POWER_SUPPLY_PROP_STATUS:
+ ret = bq24190_charger_get_status(bdi, val);
+ break;
+ case POWER_SUPPLY_PROP_TEMP_ALERT_MAX:
+ ret = bq24190_charger_get_temp_alert_max(bdi, val);
+ break;
+ case POWER_SUPPLY_PROP_PRECHARGE_CURRENT:
+ ret = bq24190_charger_get_precharge(bdi, val);
+ break;
+ case POWER_SUPPLY_PROP_CHARGE_TERM_CURRENT:
+ ret = bq24190_charger_get_charge_term(bdi, val);
+ break;
+ case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT:
+ ret = bq24190_charger_get_current(bdi, val);
+ break;
+ case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX:
+ ret = bq24190_charger_get_current_max(bdi, val);
+ break;
+ case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE:
+ ret = bq24190_charger_get_voltage(bdi, val);
+ break;
+ case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX:
+ ret = bq24190_charger_get_voltage_max(bdi, val);
+ break;
+ case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT:
+ ret = bq24190_charger_get_iinlimit(bdi, val);
+ break;
+ case POWER_SUPPLY_PROP_SCOPE:
+ val->intval = POWER_SUPPLY_SCOPE_SYSTEM;
+ ret = 0;
+ break;
+ case POWER_SUPPLY_PROP_MODEL_NAME:
+ val->strval = bdi->model_name;
+ ret = 0;
+ break;
+ case POWER_SUPPLY_PROP_MANUFACTURER:
+ val->strval = BQ24190_MANUFACTURER;
+ ret = 0;
+ break;
+ default:
+ ret = -ENODATA;
+ }
+
+ pm_runtime_mark_last_busy(bdi->dev);
+ pm_runtime_put_autosuspend(bdi->dev);
+
+ return ret;
+}
+
+static int bq24190_charger_set_property(struct power_supply *psy,
+ enum power_supply_property psp,
+ const union power_supply_propval *val)
+{
+ struct bq24190_dev_info *bdi = power_supply_get_drvdata(psy);
+ int ret;
+
+ dev_dbg(bdi->dev, "prop: %d\n", psp);
+
+ ret = pm_runtime_resume_and_get(bdi->dev);
+ if (ret < 0)
+ return ret;
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_ONLINE:
+ ret = bq24190_charger_set_online(bdi, val);
+ break;
+ case POWER_SUPPLY_PROP_TEMP_ALERT_MAX:
+ ret = bq24190_charger_set_temp_alert_max(bdi, val);
+ break;
+ case POWER_SUPPLY_PROP_CHARGE_TYPE:
+ ret = bq24190_charger_set_charge_type(bdi, val);
+ break;
+ case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT:
+ ret = bq24190_charger_set_current(bdi, val);
+ break;
+ case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE:
+ ret = bq24190_charger_set_voltage(bdi, val);
+ break;
+ case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT:
+ ret = bq24190_charger_set_iinlimit(bdi, val);
+ break;
+ default:
+ ret = -EINVAL;
+ }
+
+ pm_runtime_mark_last_busy(bdi->dev);
+ pm_runtime_put_autosuspend(bdi->dev);
+
+ return ret;
+}
+
+static int bq24190_charger_property_is_writeable(struct power_supply *psy,
+ enum power_supply_property psp)
+{
+ switch (psp) {
+ case POWER_SUPPLY_PROP_ONLINE:
+ case POWER_SUPPLY_PROP_TEMP_ALERT_MAX:
+ case POWER_SUPPLY_PROP_CHARGE_TYPE:
+ case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT:
+ case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE:
+ case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT:
+ return 1;
+ default:
+ return 0;
+ }
+}
+
+static void bq24190_input_current_limit_work(struct work_struct *work)
+{
+ struct bq24190_dev_info *bdi =
+ container_of(work, struct bq24190_dev_info,
+ input_current_limit_work.work);
+ union power_supply_propval val;
+ int ret;
+
+ ret = power_supply_get_property_from_supplier(bdi->charger,
+ POWER_SUPPLY_PROP_CURRENT_MAX,
+ &val);
+ if (ret)
+ return;
+
+ bq24190_charger_set_property(bdi->charger,
+ POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT,
+ &val);
+ power_supply_changed(bdi->charger);
+}
+
+/* Sync the input-current-limit with our parent supply (if we have one) */
+static void bq24190_charger_external_power_changed(struct power_supply *psy)
+{
+ struct bq24190_dev_info *bdi = power_supply_get_drvdata(psy);
+
+ /*
+ * The Power-Good detection may take up to 220ms, sometimes
+ * the external charger detection is quicker, and the bq24190 will
+ * reset to iinlim based on its own charger detection (which is not
+ * hooked up when using external charger detection) resulting in a
+ * too low default 500mA iinlim. Delay setting the input-current-limit
+ * for 300ms to avoid this.
+ */
+ queue_delayed_work(system_wq, &bdi->input_current_limit_work,
+ msecs_to_jiffies(300));
+}
+
+static enum power_supply_property bq24190_charger_properties[] = {
+ POWER_SUPPLY_PROP_CHARGE_TYPE,
+ POWER_SUPPLY_PROP_HEALTH,
+ POWER_SUPPLY_PROP_ONLINE,
+ POWER_SUPPLY_PROP_STATUS,
+ POWER_SUPPLY_PROP_TEMP_ALERT_MAX,
+ POWER_SUPPLY_PROP_PRECHARGE_CURRENT,
+ POWER_SUPPLY_PROP_CHARGE_TERM_CURRENT,
+ POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT,
+ POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX,
+ POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE,
+ POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX,
+ POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT,
+ POWER_SUPPLY_PROP_SCOPE,
+ POWER_SUPPLY_PROP_MODEL_NAME,
+ POWER_SUPPLY_PROP_MANUFACTURER,
+};
+
+static char *bq24190_charger_supplied_to[] = {
+ "main-battery",
+};
+
+static const struct power_supply_desc bq24190_charger_desc = {
+ .name = "bq24190-charger",
+ .type = POWER_SUPPLY_TYPE_USB,
+ .properties = bq24190_charger_properties,
+ .num_properties = ARRAY_SIZE(bq24190_charger_properties),
+ .get_property = bq24190_charger_get_property,
+ .set_property = bq24190_charger_set_property,
+ .property_is_writeable = bq24190_charger_property_is_writeable,
+ .external_power_changed = bq24190_charger_external_power_changed,
+};
+
+/* Battery power supply property routines */
+
+static int bq24190_battery_get_status(struct bq24190_dev_info *bdi,
+ union power_supply_propval *val)
+{
+ u8 ss_reg, chrg_fault;
+ int status, ret;
+
+ mutex_lock(&bdi->f_reg_lock);
+ chrg_fault = bdi->f_reg;
+ mutex_unlock(&bdi->f_reg_lock);
+
+ chrg_fault &= BQ24190_REG_F_CHRG_FAULT_MASK;
+ chrg_fault >>= BQ24190_REG_F_CHRG_FAULT_SHIFT;
+
+ ret = bq24190_read(bdi, BQ24190_REG_SS, &ss_reg);
+ if (ret < 0)
+ return ret;
+
+ /*
+ * The battery must be discharging when any of these are true:
+ * - there is no good power source;
+ * - there is a charge fault.
+ * Could also be discharging when in "supplement mode" but
+ * there is no way to tell when its in that mode.
+ */
+ if (!(ss_reg & BQ24190_REG_SS_PG_STAT_MASK) || chrg_fault) {
+ status = POWER_SUPPLY_STATUS_DISCHARGING;
+ } else {
+ ss_reg &= BQ24190_REG_SS_CHRG_STAT_MASK;
+ ss_reg >>= BQ24190_REG_SS_CHRG_STAT_SHIFT;
+
+ switch (ss_reg) {
+ case 0x0: /* Not Charging */
+ status = POWER_SUPPLY_STATUS_NOT_CHARGING;
+ break;
+ case 0x1: /* Pre-charge */
+ case 0x2: /* Fast Charging */
+ status = POWER_SUPPLY_STATUS_CHARGING;
+ break;
+ case 0x3: /* Charge Termination Done */
+ status = POWER_SUPPLY_STATUS_FULL;
+ break;
+ default:
+ ret = -EIO;
+ }
+ }
+
+ if (!ret)
+ val->intval = status;
+
+ return ret;
+}
+
+static int bq24190_battery_get_health(struct bq24190_dev_info *bdi,
+ union power_supply_propval *val)
+{
+ u8 v;
+ int health;
+
+ mutex_lock(&bdi->f_reg_lock);
+ v = bdi->f_reg;
+ mutex_unlock(&bdi->f_reg_lock);
+
+ if (v & BQ24190_REG_F_BAT_FAULT_MASK) {
+ health = POWER_SUPPLY_HEALTH_OVERVOLTAGE;
+ } else {
+ v &= BQ24190_REG_F_NTC_FAULT_MASK;
+ v >>= BQ24190_REG_F_NTC_FAULT_SHIFT;
+
+ switch (v) {
+ case 0x0: /* Normal */
+ health = POWER_SUPPLY_HEALTH_GOOD;
+ break;
+ case 0x1: /* TS1 Cold */
+ case 0x3: /* TS2 Cold */
+ case 0x5: /* Both Cold */
+ health = POWER_SUPPLY_HEALTH_COLD;
+ break;
+ case 0x2: /* TS1 Hot */
+ case 0x4: /* TS2 Hot */
+ case 0x6: /* Both Hot */
+ health = POWER_SUPPLY_HEALTH_OVERHEAT;
+ break;
+ default:
+ health = POWER_SUPPLY_HEALTH_UNKNOWN;
+ }
+ }
+
+ val->intval = health;
+ return 0;
+}
+
+static int bq24190_battery_get_online(struct bq24190_dev_info *bdi,
+ union power_supply_propval *val)
+{
+ u8 batfet_disable;
+ int ret;
+
+ ret = bq24190_read_mask(bdi, BQ24190_REG_MOC,
+ BQ24190_REG_MOC_BATFET_DISABLE_MASK,
+ BQ24190_REG_MOC_BATFET_DISABLE_SHIFT, &batfet_disable);
+ if (ret < 0)
+ return ret;
+
+ val->intval = !batfet_disable;
+ return 0;
+}
+
+static int bq24190_battery_set_online(struct bq24190_dev_info *bdi,
+ const union power_supply_propval *val)
+{
+ return bq24190_write_mask(bdi, BQ24190_REG_MOC,
+ BQ24190_REG_MOC_BATFET_DISABLE_MASK,
+ BQ24190_REG_MOC_BATFET_DISABLE_SHIFT, !val->intval);
+}
+
+static int bq24190_battery_get_temp_alert_max(struct bq24190_dev_info *bdi,
+ union power_supply_propval *val)
+{
+ int temp, ret;
+
+ ret = bq24190_get_field_val(bdi, BQ24190_REG_ICTRC,
+ BQ24190_REG_ICTRC_TREG_MASK,
+ BQ24190_REG_ICTRC_TREG_SHIFT,
+ bq24190_ictrc_treg_values,
+ ARRAY_SIZE(bq24190_ictrc_treg_values), &temp);
+ if (ret < 0)
+ return ret;
+
+ val->intval = temp;
+ return 0;
+}
+
+static int bq24190_battery_set_temp_alert_max(struct bq24190_dev_info *bdi,
+ const union power_supply_propval *val)
+{
+ return bq24190_set_field_val(bdi, BQ24190_REG_ICTRC,
+ BQ24190_REG_ICTRC_TREG_MASK,
+ BQ24190_REG_ICTRC_TREG_SHIFT,
+ bq24190_ictrc_treg_values,
+ ARRAY_SIZE(bq24190_ictrc_treg_values), val->intval);
+}
+
+static int bq24190_battery_get_property(struct power_supply *psy,
+ enum power_supply_property psp, union power_supply_propval *val)
+{
+ struct bq24190_dev_info *bdi = power_supply_get_drvdata(psy);
+ int ret;
+
+ dev_warn(bdi->dev, "warning: /sys/class/power_supply/bq24190-battery is deprecated\n");
+ dev_dbg(bdi->dev, "prop: %d\n", psp);
+
+ ret = pm_runtime_resume_and_get(bdi->dev);
+ if (ret < 0)
+ return ret;
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_STATUS:
+ ret = bq24190_battery_get_status(bdi, val);
+ break;
+ case POWER_SUPPLY_PROP_HEALTH:
+ ret = bq24190_battery_get_health(bdi, val);
+ break;
+ case POWER_SUPPLY_PROP_ONLINE:
+ ret = bq24190_battery_get_online(bdi, val);
+ break;
+ case POWER_SUPPLY_PROP_TECHNOLOGY:
+ /* Could be Li-on or Li-polymer but no way to tell which */
+ val->intval = POWER_SUPPLY_TECHNOLOGY_UNKNOWN;
+ ret = 0;
+ break;
+ case POWER_SUPPLY_PROP_TEMP_ALERT_MAX:
+ ret = bq24190_battery_get_temp_alert_max(bdi, val);
+ break;
+ case POWER_SUPPLY_PROP_SCOPE:
+ val->intval = POWER_SUPPLY_SCOPE_SYSTEM;
+ ret = 0;
+ break;
+ default:
+ ret = -ENODATA;
+ }
+
+ pm_runtime_mark_last_busy(bdi->dev);
+ pm_runtime_put_autosuspend(bdi->dev);
+
+ return ret;
+}
+
+static int bq24190_battery_set_property(struct power_supply *psy,
+ enum power_supply_property psp,
+ const union power_supply_propval *val)
+{
+ struct bq24190_dev_info *bdi = power_supply_get_drvdata(psy);
+ int ret;
+
+ dev_warn(bdi->dev, "warning: /sys/class/power_supply/bq24190-battery is deprecated\n");
+ dev_dbg(bdi->dev, "prop: %d\n", psp);
+
+ ret = pm_runtime_resume_and_get(bdi->dev);
+ if (ret < 0)
+ return ret;
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_ONLINE:
+ ret = bq24190_battery_set_online(bdi, val);
+ break;
+ case POWER_SUPPLY_PROP_TEMP_ALERT_MAX:
+ ret = bq24190_battery_set_temp_alert_max(bdi, val);
+ break;
+ default:
+ ret = -EINVAL;
+ }
+
+ pm_runtime_mark_last_busy(bdi->dev);
+ pm_runtime_put_autosuspend(bdi->dev);
+
+ return ret;
+}
+
+static int bq24190_battery_property_is_writeable(struct power_supply *psy,
+ enum power_supply_property psp)
+{
+ int ret;
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_ONLINE:
+ case POWER_SUPPLY_PROP_TEMP_ALERT_MAX:
+ ret = 1;
+ break;
+ default:
+ ret = 0;
+ }
+
+ return ret;
+}
+
+static enum power_supply_property bq24190_battery_properties[] = {
+ POWER_SUPPLY_PROP_STATUS,
+ POWER_SUPPLY_PROP_HEALTH,
+ POWER_SUPPLY_PROP_ONLINE,
+ POWER_SUPPLY_PROP_TECHNOLOGY,
+ POWER_SUPPLY_PROP_TEMP_ALERT_MAX,
+ POWER_SUPPLY_PROP_SCOPE,
+};
+
+static const struct power_supply_desc bq24190_battery_desc = {
+ .name = "bq24190-battery",
+ .type = POWER_SUPPLY_TYPE_BATTERY,
+ .properties = bq24190_battery_properties,
+ .num_properties = ARRAY_SIZE(bq24190_battery_properties),
+ .get_property = bq24190_battery_get_property,
+ .set_property = bq24190_battery_set_property,
+ .property_is_writeable = bq24190_battery_property_is_writeable,
+};
+
+static int bq24190_configure_usb_otg(struct bq24190_dev_info *bdi, u8 ss_reg)
+{
+ bool otg_enabled;
+ int ret;
+
+ otg_enabled = !!(ss_reg & BQ24190_REG_SS_VBUS_STAT_MASK);
+ ret = extcon_set_state_sync(bdi->edev, EXTCON_USB, otg_enabled);
+ if (ret < 0)
+ dev_err(bdi->dev, "Can't set extcon state to %d: %d\n",
+ otg_enabled, ret);
+
+ return ret;
+}
+
+static void bq24190_check_status(struct bq24190_dev_info *bdi)
+{
+ const u8 battery_mask_ss = BQ24190_REG_SS_CHRG_STAT_MASK;
+ const u8 battery_mask_f = BQ24190_REG_F_BAT_FAULT_MASK
+ | BQ24190_REG_F_NTC_FAULT_MASK;
+ bool alert_charger = false, alert_battery = false;
+ u8 ss_reg = 0, f_reg = 0;
+ int i, ret;
+
+ ret = bq24190_read(bdi, BQ24190_REG_SS, &ss_reg);
+ if (ret < 0) {
+ dev_err(bdi->dev, "Can't read SS reg: %d\n", ret);
+ return;
+ }
+
+ i = 0;
+ do {
+ ret = bq24190_read(bdi, BQ24190_REG_F, &f_reg);
+ if (ret < 0) {
+ dev_err(bdi->dev, "Can't read F reg: %d\n", ret);
+ return;
+ }
+ } while (f_reg && ++i < 2);
+
+ /* ignore over/under voltage fault after disconnect */
+ if (f_reg == (1 << BQ24190_REG_F_CHRG_FAULT_SHIFT) &&
+ !(ss_reg & BQ24190_REG_SS_PG_STAT_MASK))
+ f_reg = 0;
+
+ if (f_reg != bdi->f_reg) {
+ dev_warn(bdi->dev,
+ "Fault: boost %d, charge %d, battery %d, ntc %d\n",
+ !!(f_reg & BQ24190_REG_F_BOOST_FAULT_MASK),
+ !!(f_reg & BQ24190_REG_F_CHRG_FAULT_MASK),
+ !!(f_reg & BQ24190_REG_F_BAT_FAULT_MASK),
+ !!(f_reg & BQ24190_REG_F_NTC_FAULT_MASK));
+
+ mutex_lock(&bdi->f_reg_lock);
+ if ((bdi->f_reg & battery_mask_f) != (f_reg & battery_mask_f))
+ alert_battery = true;
+ if ((bdi->f_reg & ~battery_mask_f) != (f_reg & ~battery_mask_f))
+ alert_charger = true;
+ bdi->f_reg = f_reg;
+ mutex_unlock(&bdi->f_reg_lock);
+ }
+
+ if (ss_reg != bdi->ss_reg) {
+ /*
+ * The device is in host mode so when PG_STAT goes from 1->0
+ * (i.e., power removed) HIZ needs to be disabled.
+ */
+ if ((bdi->ss_reg & BQ24190_REG_SS_PG_STAT_MASK) &&
+ !(ss_reg & BQ24190_REG_SS_PG_STAT_MASK)) {
+ ret = bq24190_write_mask(bdi, BQ24190_REG_ISC,
+ BQ24190_REG_ISC_EN_HIZ_MASK,
+ BQ24190_REG_ISC_EN_HIZ_SHIFT,
+ 0);
+ if (ret < 0)
+ dev_err(bdi->dev, "Can't access ISC reg: %d\n",
+ ret);
+ }
+
+ if ((bdi->ss_reg & battery_mask_ss) != (ss_reg & battery_mask_ss))
+ alert_battery = true;
+ if ((bdi->ss_reg & ~battery_mask_ss) != (ss_reg & ~battery_mask_ss))
+ alert_charger = true;
+ bdi->ss_reg = ss_reg;
+ }
+
+ if (alert_charger || alert_battery) {
+ power_supply_changed(bdi->charger);
+ bq24190_configure_usb_otg(bdi, ss_reg);
+ }
+ if (alert_battery && bdi->battery)
+ power_supply_changed(bdi->battery);
+
+ dev_dbg(bdi->dev, "ss_reg: 0x%02x, f_reg: 0x%02x\n", ss_reg, f_reg);
+}
+
+static irqreturn_t bq24190_irq_handler_thread(int irq, void *data)
+{
+ struct bq24190_dev_info *bdi = data;
+ int error;
+
+ bdi->irq_event = true;
+ error = pm_runtime_resume_and_get(bdi->dev);
+ if (error < 0) {
+ dev_warn(bdi->dev, "pm_runtime_get failed: %i\n", error);
+ return IRQ_NONE;
+ }
+ bq24190_check_status(bdi);
+ pm_runtime_mark_last_busy(bdi->dev);
+ pm_runtime_put_autosuspend(bdi->dev);
+ bdi->irq_event = false;
+
+ return IRQ_HANDLED;
+}
+
+static int bq24190_hw_init(struct bq24190_dev_info *bdi)
+{
+ u8 v;
+ int ret;
+
+ /* First check that the device really is what its supposed to be */
+ ret = bq24190_read_mask(bdi, BQ24190_REG_VPRS,
+ BQ24190_REG_VPRS_PN_MASK,
+ BQ24190_REG_VPRS_PN_SHIFT,
+ &v);
+ if (ret < 0)
+ return ret;
+
+ switch (v) {
+ case BQ24190_REG_VPRS_PN_24190:
+ case BQ24190_REG_VPRS_PN_24192:
+ case BQ24190_REG_VPRS_PN_24192I:
+ break;
+ default:
+ dev_err(bdi->dev, "Error unknown model: 0x%02x\n", v);
+ return -ENODEV;
+ }
+
+ ret = bq24190_register_reset(bdi);
+ if (ret < 0)
+ return ret;
+
+ ret = bq24190_set_config(bdi);
+ if (ret < 0)
+ return ret;
+
+ return bq24190_read(bdi, BQ24190_REG_SS, &bdi->ss_reg);
+}
+
+static int bq24190_get_config(struct bq24190_dev_info *bdi)
+{
+ const char * const s = "ti,system-minimum-microvolt";
+ struct power_supply_battery_info info = {};
+ int v;
+
+ if (device_property_read_u32(bdi->dev, s, &v) == 0) {
+ v /= 1000;
+ if (v >= BQ24190_REG_POC_SYS_MIN_MIN
+ && v <= BQ24190_REG_POC_SYS_MIN_MAX)
+ bdi->sys_min = v;
+ else
+ dev_warn(bdi->dev, "invalid value for %s: %u\n", s, v);
+ }
+
+ if (bdi->dev->of_node &&
+ !power_supply_get_battery_info(bdi->charger, &info)) {
+ v = info.precharge_current_ua / 1000;
+ if (v >= BQ24190_REG_PCTCC_IPRECHG_MIN
+ && v <= BQ24190_REG_PCTCC_IPRECHG_MAX)
+ bdi->iprechg = v;
+ else
+ dev_warn(bdi->dev, "invalid value for battery:precharge-current-microamp: %d\n",
+ v);
+
+ v = info.charge_term_current_ua / 1000;
+ if (v >= BQ24190_REG_PCTCC_ITERM_MIN
+ && v <= BQ24190_REG_PCTCC_ITERM_MAX)
+ bdi->iterm = v;
+ else
+ dev_warn(bdi->dev, "invalid value for battery:charge-term-current-microamp: %d\n",
+ v);
+ }
+
+ return 0;
+}
+
+static int bq24190_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct i2c_adapter *adapter = client->adapter;
+ struct device *dev = &client->dev;
+ struct power_supply_config charger_cfg = {}, battery_cfg = {};
+ struct bq24190_dev_info *bdi;
+ int ret;
+
+ if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) {
+ dev_err(dev, "No support for SMBUS_BYTE_DATA\n");
+ return -ENODEV;
+ }
+
+ bdi = devm_kzalloc(dev, sizeof(*bdi), GFP_KERNEL);
+ if (!bdi) {
+ dev_err(dev, "Can't alloc bdi struct\n");
+ return -ENOMEM;
+ }
+
+ bdi->client = client;
+ bdi->dev = dev;
+ strncpy(bdi->model_name, id->name, I2C_NAME_SIZE);
+ mutex_init(&bdi->f_reg_lock);
+ bdi->f_reg = 0;
+ bdi->ss_reg = BQ24190_REG_SS_VBUS_STAT_MASK; /* impossible state */
+ INIT_DELAYED_WORK(&bdi->input_current_limit_work,
+ bq24190_input_current_limit_work);
+
+ i2c_set_clientdata(client, bdi);
+
+ if (client->irq <= 0) {
+ dev_err(dev, "Can't get irq info\n");
+ return -EINVAL;
+ }
+
+ bdi->edev = devm_extcon_dev_allocate(dev, bq24190_usb_extcon_cable);
+ if (IS_ERR(bdi->edev))
+ return PTR_ERR(bdi->edev);
+
+ ret = devm_extcon_dev_register(dev, bdi->edev);
+ if (ret < 0)
+ return ret;
+
+ pm_runtime_enable(dev);
+ pm_runtime_use_autosuspend(dev);
+ pm_runtime_set_autosuspend_delay(dev, 600);
+ ret = pm_runtime_get_sync(dev);
+ if (ret < 0) {
+ dev_err(dev, "pm_runtime_get failed: %i\n", ret);
+ goto out_pmrt;
+ }
+
+#ifdef CONFIG_SYSFS
+ bq24190_sysfs_init_attrs();
+ charger_cfg.attr_grp = bq24190_sysfs_groups;
+#endif
+
+ charger_cfg.drv_data = bdi;
+ charger_cfg.of_node = dev->of_node;
+ charger_cfg.supplied_to = bq24190_charger_supplied_to;
+ charger_cfg.num_supplicants = ARRAY_SIZE(bq24190_charger_supplied_to),
+ bdi->charger = power_supply_register(dev, &bq24190_charger_desc,
+ &charger_cfg);
+ if (IS_ERR(bdi->charger)) {
+ dev_err(dev, "Can't register charger\n");
+ ret = PTR_ERR(bdi->charger);
+ goto out_pmrt;
+ }
+
+ /* the battery class is deprecated and will be removed. */
+ /* in the interim, this property hides it. */
+ if (!device_property_read_bool(dev, "omit-battery-class")) {
+ battery_cfg.drv_data = bdi;
+ bdi->battery = power_supply_register(dev, &bq24190_battery_desc,
+ &battery_cfg);
+ if (IS_ERR(bdi->battery)) {
+ dev_err(dev, "Can't register battery\n");
+ ret = PTR_ERR(bdi->battery);
+ goto out_charger;
+ }
+ }
+
+ ret = bq24190_get_config(bdi);
+ if (ret < 0) {
+ dev_err(dev, "Can't get devicetree config\n");
+ goto out_charger;
+ }
+
+ ret = bq24190_hw_init(bdi);
+ if (ret < 0) {
+ dev_err(dev, "Hardware init failed\n");
+ goto out_charger;
+ }
+
+ ret = bq24190_configure_usb_otg(bdi, bdi->ss_reg);
+ if (ret < 0)
+ goto out_charger;
+
+ bdi->initialized = true;
+
+ ret = devm_request_threaded_irq(dev, client->irq, NULL,
+ bq24190_irq_handler_thread,
+ IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
+ "bq24190-charger", bdi);
+ if (ret < 0) {
+ dev_err(dev, "Can't set up irq handler\n");
+ goto out_charger;
+ }
+
+ ret = bq24190_register_vbus_regulator(bdi);
+ if (ret < 0)
+ goto out_charger;
+
+ enable_irq_wake(client->irq);
+
+ pm_runtime_mark_last_busy(dev);
+ pm_runtime_put_autosuspend(dev);
+
+ return 0;
+
+out_charger:
+ if (!IS_ERR_OR_NULL(bdi->battery))
+ power_supply_unregister(bdi->battery);
+ power_supply_unregister(bdi->charger);
+
+out_pmrt:
+ pm_runtime_put_sync(dev);
+ pm_runtime_dont_use_autosuspend(dev);
+ pm_runtime_disable(dev);
+ return ret;
+}
+
+static int bq24190_remove(struct i2c_client *client)
+{
+ struct bq24190_dev_info *bdi = i2c_get_clientdata(client);
+ int error;
+
+ cancel_delayed_work_sync(&bdi->input_current_limit_work);
+ error = pm_runtime_resume_and_get(bdi->dev);
+ if (error < 0)
+ dev_warn(bdi->dev, "pm_runtime_get failed: %i\n", error);
+
+ bq24190_register_reset(bdi);
+ if (bdi->battery)
+ power_supply_unregister(bdi->battery);
+ power_supply_unregister(bdi->charger);
+ if (error >= 0)
+ pm_runtime_put_sync(bdi->dev);
+ pm_runtime_dont_use_autosuspend(bdi->dev);
+ pm_runtime_disable(bdi->dev);
+
+ return 0;
+}
+
+static __maybe_unused int bq24190_runtime_suspend(struct device *dev)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct bq24190_dev_info *bdi = i2c_get_clientdata(client);
+
+ if (!bdi->initialized)
+ return 0;
+
+ dev_dbg(bdi->dev, "%s\n", __func__);
+
+ return 0;
+}
+
+static __maybe_unused int bq24190_runtime_resume(struct device *dev)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct bq24190_dev_info *bdi = i2c_get_clientdata(client);
+
+ if (!bdi->initialized)
+ return 0;
+
+ if (!bdi->irq_event) {
+ dev_dbg(bdi->dev, "checking events on possible wakeirq\n");
+ bq24190_check_status(bdi);
+ }
+
+ return 0;
+}
+
+static __maybe_unused int bq24190_pm_suspend(struct device *dev)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct bq24190_dev_info *bdi = i2c_get_clientdata(client);
+ int error;
+
+ error = pm_runtime_resume_and_get(bdi->dev);
+ if (error < 0)
+ dev_warn(bdi->dev, "pm_runtime_get failed: %i\n", error);
+
+ bq24190_register_reset(bdi);
+
+ if (error >= 0) {
+ pm_runtime_mark_last_busy(bdi->dev);
+ pm_runtime_put_autosuspend(bdi->dev);
+ }
+
+ return 0;
+}
+
+static __maybe_unused int bq24190_pm_resume(struct device *dev)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct bq24190_dev_info *bdi = i2c_get_clientdata(client);
+ int error;
+
+ bdi->f_reg = 0;
+ bdi->ss_reg = BQ24190_REG_SS_VBUS_STAT_MASK; /* impossible state */
+
+ error = pm_runtime_resume_and_get(bdi->dev);
+ if (error < 0)
+ dev_warn(bdi->dev, "pm_runtime_get failed: %i\n", error);
+
+ bq24190_register_reset(bdi);
+ bq24190_set_config(bdi);
+ bq24190_read(bdi, BQ24190_REG_SS, &bdi->ss_reg);
+
+ if (error >= 0) {
+ pm_runtime_mark_last_busy(bdi->dev);
+ pm_runtime_put_autosuspend(bdi->dev);
+ }
+
+ /* Things may have changed while suspended so alert upper layer */
+ power_supply_changed(bdi->charger);
+ if (bdi->battery)
+ power_supply_changed(bdi->battery);
+
+ return 0;
+}
+
+static const struct dev_pm_ops bq24190_pm_ops = {
+ SET_RUNTIME_PM_OPS(bq24190_runtime_suspend, bq24190_runtime_resume,
+ NULL)
+ SET_SYSTEM_SLEEP_PM_OPS(bq24190_pm_suspend, bq24190_pm_resume)
+};
+
+static const struct i2c_device_id bq24190_i2c_ids[] = {
+ { "bq24190" },
+ { "bq24192" },
+ { "bq24192i" },
+ { "bq24196" },
+ { },
+};
+MODULE_DEVICE_TABLE(i2c, bq24190_i2c_ids);
+
+#ifdef CONFIG_OF
+static const struct of_device_id bq24190_of_match[] = {
+ { .compatible = "ti,bq24190", },
+ { .compatible = "ti,bq24192", },
+ { .compatible = "ti,bq24192i", },
+ { .compatible = "ti,bq24196", },
+ { },
+};
+MODULE_DEVICE_TABLE(of, bq24190_of_match);
+#else
+static const struct of_device_id bq24190_of_match[] = {
+ { },
+};
+#endif
+
+static struct i2c_driver bq24190_driver = {
+ .probe = bq24190_probe,
+ .remove = bq24190_remove,
+ .id_table = bq24190_i2c_ids,
+ .driver = {
+ .name = "bq24190-charger",
+ .pm = &bq24190_pm_ops,
+ .of_match_table = of_match_ptr(bq24190_of_match),
+ },
+};
+module_i2c_driver(bq24190_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Mark A. Greer <mgreer@animalcreek.com>");
+MODULE_DESCRIPTION("TI BQ24190 Charger Driver");
diff --git a/drivers/power/supply/bq24257_charger.c b/drivers/power/supply/bq24257_charger.c
new file mode 100644
index 000000000..96cb3290b
--- /dev/null
+++ b/drivers/power/supply/bq24257_charger.c
@@ -0,0 +1,1180 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * TI BQ24257 charger driver
+ *
+ * Copyright (C) 2015 Intel Corporation
+ *
+ * Datasheets:
+ * https://www.ti.com/product/bq24250
+ * https://www.ti.com/product/bq24251
+ * https://www.ti.com/product/bq24257
+ */
+
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/power_supply.h>
+#include <linux/regmap.h>
+#include <linux/types.h>
+#include <linux/gpio/consumer.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+
+#include <linux/acpi.h>
+#include <linux/of.h>
+
+#define BQ24257_REG_1 0x00
+#define BQ24257_REG_2 0x01
+#define BQ24257_REG_3 0x02
+#define BQ24257_REG_4 0x03
+#define BQ24257_REG_5 0x04
+#define BQ24257_REG_6 0x05
+#define BQ24257_REG_7 0x06
+
+#define BQ24257_MANUFACTURER "Texas Instruments"
+#define BQ24257_PG_GPIO "pg"
+
+#define BQ24257_ILIM_SET_DELAY 1000 /* msec */
+
+/*
+ * When adding support for new devices make sure that enum bq2425x_chip and
+ * bq2425x_chip_name[] always stay in sync!
+ */
+enum bq2425x_chip {
+ BQ24250,
+ BQ24251,
+ BQ24257,
+};
+
+static const char *const bq2425x_chip_name[] = {
+ "bq24250",
+ "bq24251",
+ "bq24257",
+};
+
+enum bq24257_fields {
+ F_WD_FAULT, F_WD_EN, F_STAT, F_FAULT, /* REG 1 */
+ F_RESET, F_IILIMIT, F_EN_STAT, F_EN_TERM, F_CE, F_HZ_MODE, /* REG 2 */
+ F_VBAT, F_USB_DET, /* REG 3 */
+ F_ICHG, F_ITERM, /* REG 4 */
+ F_LOOP_STATUS, F_LOW_CHG, F_DPDM_EN, F_CE_STATUS, F_VINDPM, /* REG 5 */
+ F_X2_TMR_EN, F_TMR, F_SYSOFF, F_TS_EN, F_TS_STAT, /* REG 6 */
+ F_VOVP, F_CLR_VDP, F_FORCE_BATDET, F_FORCE_PTM, /* REG 7 */
+
+ F_MAX_FIELDS
+};
+
+/* initial field values, converted from uV/uA */
+struct bq24257_init_data {
+ u8 ichg; /* charge current */
+ u8 vbat; /* regulation voltage */
+ u8 iterm; /* termination current */
+ u8 iilimit; /* input current limit */
+ u8 vovp; /* over voltage protection voltage */
+ u8 vindpm; /* VDMP input threshold voltage */
+};
+
+struct bq24257_state {
+ u8 status;
+ u8 fault;
+ bool power_good;
+};
+
+struct bq24257_device {
+ struct i2c_client *client;
+ struct device *dev;
+ struct power_supply *charger;
+
+ enum bq2425x_chip chip;
+
+ struct regmap *rmap;
+ struct regmap_field *rmap_fields[F_MAX_FIELDS];
+
+ struct gpio_desc *pg;
+
+ struct delayed_work iilimit_setup_work;
+
+ struct bq24257_init_data init_data;
+ struct bq24257_state state;
+
+ struct mutex lock; /* protect state data */
+
+ bool iilimit_autoset_enable;
+};
+
+static bool bq24257_is_volatile_reg(struct device *dev, unsigned int reg)
+{
+ switch (reg) {
+ case BQ24257_REG_2:
+ case BQ24257_REG_4:
+ return false;
+
+ default:
+ return true;
+ }
+}
+
+static const struct regmap_config bq24257_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+
+ .max_register = BQ24257_REG_7,
+ .cache_type = REGCACHE_RBTREE,
+
+ .volatile_reg = bq24257_is_volatile_reg,
+};
+
+static const struct reg_field bq24257_reg_fields[] = {
+ /* REG 1 */
+ [F_WD_FAULT] = REG_FIELD(BQ24257_REG_1, 7, 7),
+ [F_WD_EN] = REG_FIELD(BQ24257_REG_1, 6, 6),
+ [F_STAT] = REG_FIELD(BQ24257_REG_1, 4, 5),
+ [F_FAULT] = REG_FIELD(BQ24257_REG_1, 0, 3),
+ /* REG 2 */
+ [F_RESET] = REG_FIELD(BQ24257_REG_2, 7, 7),
+ [F_IILIMIT] = REG_FIELD(BQ24257_REG_2, 4, 6),
+ [F_EN_STAT] = REG_FIELD(BQ24257_REG_2, 3, 3),
+ [F_EN_TERM] = REG_FIELD(BQ24257_REG_2, 2, 2),
+ [F_CE] = REG_FIELD(BQ24257_REG_2, 1, 1),
+ [F_HZ_MODE] = REG_FIELD(BQ24257_REG_2, 0, 0),
+ /* REG 3 */
+ [F_VBAT] = REG_FIELD(BQ24257_REG_3, 2, 7),
+ [F_USB_DET] = REG_FIELD(BQ24257_REG_3, 0, 1),
+ /* REG 4 */
+ [F_ICHG] = REG_FIELD(BQ24257_REG_4, 3, 7),
+ [F_ITERM] = REG_FIELD(BQ24257_REG_4, 0, 2),
+ /* REG 5 */
+ [F_LOOP_STATUS] = REG_FIELD(BQ24257_REG_5, 6, 7),
+ [F_LOW_CHG] = REG_FIELD(BQ24257_REG_5, 5, 5),
+ [F_DPDM_EN] = REG_FIELD(BQ24257_REG_5, 4, 4),
+ [F_CE_STATUS] = REG_FIELD(BQ24257_REG_5, 3, 3),
+ [F_VINDPM] = REG_FIELD(BQ24257_REG_5, 0, 2),
+ /* REG 6 */
+ [F_X2_TMR_EN] = REG_FIELD(BQ24257_REG_6, 7, 7),
+ [F_TMR] = REG_FIELD(BQ24257_REG_6, 5, 6),
+ [F_SYSOFF] = REG_FIELD(BQ24257_REG_6, 4, 4),
+ [F_TS_EN] = REG_FIELD(BQ24257_REG_6, 3, 3),
+ [F_TS_STAT] = REG_FIELD(BQ24257_REG_6, 0, 2),
+ /* REG 7 */
+ [F_VOVP] = REG_FIELD(BQ24257_REG_7, 5, 7),
+ [F_CLR_VDP] = REG_FIELD(BQ24257_REG_7, 4, 4),
+ [F_FORCE_BATDET] = REG_FIELD(BQ24257_REG_7, 3, 3),
+ [F_FORCE_PTM] = REG_FIELD(BQ24257_REG_7, 2, 2)
+};
+
+static const u32 bq24257_vbat_map[] = {
+ 3500000, 3520000, 3540000, 3560000, 3580000, 3600000, 3620000, 3640000,
+ 3660000, 3680000, 3700000, 3720000, 3740000, 3760000, 3780000, 3800000,
+ 3820000, 3840000, 3860000, 3880000, 3900000, 3920000, 3940000, 3960000,
+ 3980000, 4000000, 4020000, 4040000, 4060000, 4080000, 4100000, 4120000,
+ 4140000, 4160000, 4180000, 4200000, 4220000, 4240000, 4260000, 4280000,
+ 4300000, 4320000, 4340000, 4360000, 4380000, 4400000, 4420000, 4440000
+};
+
+#define BQ24257_VBAT_MAP_SIZE ARRAY_SIZE(bq24257_vbat_map)
+
+static const u32 bq24257_ichg_map[] = {
+ 500000, 550000, 600000, 650000, 700000, 750000, 800000, 850000, 900000,
+ 950000, 1000000, 1050000, 1100000, 1150000, 1200000, 1250000, 1300000,
+ 1350000, 1400000, 1450000, 1500000, 1550000, 1600000, 1650000, 1700000,
+ 1750000, 1800000, 1850000, 1900000, 1950000, 2000000
+};
+
+#define BQ24257_ICHG_MAP_SIZE ARRAY_SIZE(bq24257_ichg_map)
+
+static const u32 bq24257_iterm_map[] = {
+ 50000, 75000, 100000, 125000, 150000, 175000, 200000, 225000
+};
+
+#define BQ24257_ITERM_MAP_SIZE ARRAY_SIZE(bq24257_iterm_map)
+
+static const u32 bq24257_iilimit_map[] = {
+ 100000, 150000, 500000, 900000, 1500000, 2000000
+};
+
+#define BQ24257_IILIMIT_MAP_SIZE ARRAY_SIZE(bq24257_iilimit_map)
+
+static const u32 bq24257_vovp_map[] = {
+ 6000000, 6500000, 7000000, 8000000, 9000000, 9500000, 10000000,
+ 10500000
+};
+
+#define BQ24257_VOVP_MAP_SIZE ARRAY_SIZE(bq24257_vovp_map)
+
+static const u32 bq24257_vindpm_map[] = {
+ 4200000, 4280000, 4360000, 4440000, 4520000, 4600000, 4680000,
+ 4760000
+};
+
+#define BQ24257_VINDPM_MAP_SIZE ARRAY_SIZE(bq24257_vindpm_map)
+
+static int bq24257_field_read(struct bq24257_device *bq,
+ enum bq24257_fields field_id)
+{
+ int ret;
+ int val;
+
+ ret = regmap_field_read(bq->rmap_fields[field_id], &val);
+ if (ret < 0)
+ return ret;
+
+ return val;
+}
+
+static int bq24257_field_write(struct bq24257_device *bq,
+ enum bq24257_fields field_id, u8 val)
+{
+ return regmap_field_write(bq->rmap_fields[field_id], val);
+}
+
+static u8 bq24257_find_idx(u32 value, const u32 *map, u8 map_size)
+{
+ u8 idx;
+
+ for (idx = 1; idx < map_size; idx++)
+ if (value < map[idx])
+ break;
+
+ return idx - 1;
+}
+
+enum bq24257_status {
+ STATUS_READY,
+ STATUS_CHARGE_IN_PROGRESS,
+ STATUS_CHARGE_DONE,
+ STATUS_FAULT,
+};
+
+enum bq24257_fault {
+ FAULT_NORMAL,
+ FAULT_INPUT_OVP,
+ FAULT_INPUT_UVLO,
+ FAULT_SLEEP,
+ FAULT_BAT_TS,
+ FAULT_BAT_OVP,
+ FAULT_TS,
+ FAULT_TIMER,
+ FAULT_NO_BAT,
+ FAULT_ISET,
+ FAULT_INPUT_LDO_LOW,
+};
+
+static int bq24257_get_input_current_limit(struct bq24257_device *bq,
+ union power_supply_propval *val)
+{
+ int ret;
+
+ ret = bq24257_field_read(bq, F_IILIMIT);
+ if (ret < 0)
+ return ret;
+
+ /*
+ * The "External ILIM" and "Production & Test" modes are not exposed
+ * through this driver and not being covered by the lookup table.
+ * Should such a mode have become active let's return an error rather
+ * than exceeding the bounds of the lookup table and returning
+ * garbage.
+ */
+ if (ret >= BQ24257_IILIMIT_MAP_SIZE)
+ return -ENODATA;
+
+ val->intval = bq24257_iilimit_map[ret];
+
+ return 0;
+}
+
+static int bq24257_set_input_current_limit(struct bq24257_device *bq,
+ const union power_supply_propval *val)
+{
+ /*
+ * Address the case where the user manually sets an input current limit
+ * while the charger auto-detection mechanism is is active. In this
+ * case we want to abort and go straight to the user-specified value.
+ */
+ if (bq->iilimit_autoset_enable)
+ cancel_delayed_work_sync(&bq->iilimit_setup_work);
+
+ return bq24257_field_write(bq, F_IILIMIT,
+ bq24257_find_idx(val->intval,
+ bq24257_iilimit_map,
+ BQ24257_IILIMIT_MAP_SIZE));
+}
+
+static int bq24257_power_supply_get_property(struct power_supply *psy,
+ enum power_supply_property psp,
+ union power_supply_propval *val)
+{
+ struct bq24257_device *bq = power_supply_get_drvdata(psy);
+ struct bq24257_state state;
+
+ mutex_lock(&bq->lock);
+ state = bq->state;
+ mutex_unlock(&bq->lock);
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_STATUS:
+ if (!state.power_good)
+ val->intval = POWER_SUPPLY_STATUS_DISCHARGING;
+ else if (state.status == STATUS_READY)
+ val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING;
+ else if (state.status == STATUS_CHARGE_IN_PROGRESS)
+ val->intval = POWER_SUPPLY_STATUS_CHARGING;
+ else if (state.status == STATUS_CHARGE_DONE)
+ val->intval = POWER_SUPPLY_STATUS_FULL;
+ else
+ val->intval = POWER_SUPPLY_STATUS_UNKNOWN;
+ break;
+
+ case POWER_SUPPLY_PROP_MANUFACTURER:
+ val->strval = BQ24257_MANUFACTURER;
+ break;
+
+ case POWER_SUPPLY_PROP_MODEL_NAME:
+ val->strval = bq2425x_chip_name[bq->chip];
+ break;
+
+ case POWER_SUPPLY_PROP_ONLINE:
+ val->intval = state.power_good;
+ break;
+
+ case POWER_SUPPLY_PROP_HEALTH:
+ switch (state.fault) {
+ case FAULT_NORMAL:
+ val->intval = POWER_SUPPLY_HEALTH_GOOD;
+ break;
+
+ case FAULT_INPUT_OVP:
+ case FAULT_BAT_OVP:
+ val->intval = POWER_SUPPLY_HEALTH_OVERVOLTAGE;
+ break;
+
+ case FAULT_TS:
+ case FAULT_BAT_TS:
+ val->intval = POWER_SUPPLY_HEALTH_OVERHEAT;
+ break;
+
+ case FAULT_TIMER:
+ val->intval = POWER_SUPPLY_HEALTH_SAFETY_TIMER_EXPIRE;
+ break;
+
+ default:
+ val->intval = POWER_SUPPLY_HEALTH_UNSPEC_FAILURE;
+ break;
+ }
+
+ break;
+
+ case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT:
+ val->intval = bq24257_ichg_map[bq->init_data.ichg];
+ break;
+
+ case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX:
+ val->intval = bq24257_ichg_map[BQ24257_ICHG_MAP_SIZE - 1];
+ break;
+
+ case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE:
+ val->intval = bq24257_vbat_map[bq->init_data.vbat];
+ break;
+
+ case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX:
+ val->intval = bq24257_vbat_map[BQ24257_VBAT_MAP_SIZE - 1];
+ break;
+
+ case POWER_SUPPLY_PROP_CHARGE_TERM_CURRENT:
+ val->intval = bq24257_iterm_map[bq->init_data.iterm];
+ break;
+
+ case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT:
+ return bq24257_get_input_current_limit(bq, val);
+
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int bq24257_power_supply_set_property(struct power_supply *psy,
+ enum power_supply_property prop,
+ const union power_supply_propval *val)
+{
+ struct bq24257_device *bq = power_supply_get_drvdata(psy);
+
+ switch (prop) {
+ case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT:
+ return bq24257_set_input_current_limit(bq, val);
+ default:
+ return -EINVAL;
+ }
+}
+
+static int bq24257_power_supply_property_is_writeable(struct power_supply *psy,
+ enum power_supply_property psp)
+{
+ switch (psp) {
+ case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT:
+ return true;
+ default:
+ return false;
+ }
+}
+
+static int bq24257_get_chip_state(struct bq24257_device *bq,
+ struct bq24257_state *state)
+{
+ int ret;
+
+ ret = bq24257_field_read(bq, F_STAT);
+ if (ret < 0)
+ return ret;
+
+ state->status = ret;
+
+ ret = bq24257_field_read(bq, F_FAULT);
+ if (ret < 0)
+ return ret;
+
+ state->fault = ret;
+
+ if (bq->pg)
+ state->power_good = !gpiod_get_value_cansleep(bq->pg);
+ else
+ /*
+ * If we have a chip without a dedicated power-good GPIO or
+ * some other explicit bit that would provide this information
+ * assume the power is good if there is no supply related
+ * fault - and not good otherwise. There is a possibility for
+ * other errors to mask that power in fact is not good but this
+ * is probably the best we can do here.
+ */
+ switch (state->fault) {
+ case FAULT_INPUT_OVP:
+ case FAULT_INPUT_UVLO:
+ case FAULT_INPUT_LDO_LOW:
+ state->power_good = false;
+ break;
+ default:
+ state->power_good = true;
+ }
+
+ return 0;
+}
+
+static bool bq24257_state_changed(struct bq24257_device *bq,
+ struct bq24257_state *new_state)
+{
+ int ret;
+
+ mutex_lock(&bq->lock);
+ ret = (bq->state.status != new_state->status ||
+ bq->state.fault != new_state->fault ||
+ bq->state.power_good != new_state->power_good);
+ mutex_unlock(&bq->lock);
+
+ return ret;
+}
+
+enum bq24257_loop_status {
+ LOOP_STATUS_NONE,
+ LOOP_STATUS_IN_DPM,
+ LOOP_STATUS_IN_CURRENT_LIMIT,
+ LOOP_STATUS_THERMAL,
+};
+
+enum bq24257_in_ilimit {
+ IILIMIT_100,
+ IILIMIT_150,
+ IILIMIT_500,
+ IILIMIT_900,
+ IILIMIT_1500,
+ IILIMIT_2000,
+ IILIMIT_EXT,
+ IILIMIT_NONE,
+};
+
+enum bq24257_vovp {
+ VOVP_6000,
+ VOVP_6500,
+ VOVP_7000,
+ VOVP_8000,
+ VOVP_9000,
+ VOVP_9500,
+ VOVP_10000,
+ VOVP_10500
+};
+
+enum bq24257_vindpm {
+ VINDPM_4200,
+ VINDPM_4280,
+ VINDPM_4360,
+ VINDPM_4440,
+ VINDPM_4520,
+ VINDPM_4600,
+ VINDPM_4680,
+ VINDPM_4760
+};
+
+enum bq24257_port_type {
+ PORT_TYPE_DCP, /* Dedicated Charging Port */
+ PORT_TYPE_CDP, /* Charging Downstream Port */
+ PORT_TYPE_SDP, /* Standard Downstream Port */
+ PORT_TYPE_NON_STANDARD,
+};
+
+enum bq24257_safety_timer {
+ SAFETY_TIMER_45,
+ SAFETY_TIMER_360,
+ SAFETY_TIMER_540,
+ SAFETY_TIMER_NONE,
+};
+
+static int bq24257_iilimit_autoset(struct bq24257_device *bq)
+{
+ int loop_status;
+ int iilimit;
+ int port_type;
+ int ret;
+ const u8 new_iilimit[] = {
+ [PORT_TYPE_DCP] = IILIMIT_2000,
+ [PORT_TYPE_CDP] = IILIMIT_2000,
+ [PORT_TYPE_SDP] = IILIMIT_500,
+ [PORT_TYPE_NON_STANDARD] = IILIMIT_500
+ };
+
+ ret = bq24257_field_read(bq, F_LOOP_STATUS);
+ if (ret < 0)
+ goto error;
+
+ loop_status = ret;
+
+ ret = bq24257_field_read(bq, F_IILIMIT);
+ if (ret < 0)
+ goto error;
+
+ iilimit = ret;
+
+ /*
+ * All USB ports should be able to handle 500mA. If not, DPM will lower
+ * the charging current to accommodate the power source. No need to set
+ * a lower IILIMIT value.
+ */
+ if (loop_status == LOOP_STATUS_IN_DPM && iilimit == IILIMIT_500)
+ return 0;
+
+ ret = bq24257_field_read(bq, F_USB_DET);
+ if (ret < 0)
+ goto error;
+
+ port_type = ret;
+
+ ret = bq24257_field_write(bq, F_IILIMIT, new_iilimit[port_type]);
+ if (ret < 0)
+ goto error;
+
+ ret = bq24257_field_write(bq, F_TMR, SAFETY_TIMER_360);
+ if (ret < 0)
+ goto error;
+
+ ret = bq24257_field_write(bq, F_CLR_VDP, 1);
+ if (ret < 0)
+ goto error;
+
+ dev_dbg(bq->dev, "port/loop = %d/%d -> iilimit = %d\n",
+ port_type, loop_status, new_iilimit[port_type]);
+
+ return 0;
+
+error:
+ dev_err(bq->dev, "%s: Error communicating with the chip.\n", __func__);
+ return ret;
+}
+
+static void bq24257_iilimit_setup_work(struct work_struct *work)
+{
+ struct bq24257_device *bq = container_of(work, struct bq24257_device,
+ iilimit_setup_work.work);
+
+ bq24257_iilimit_autoset(bq);
+}
+
+static void bq24257_handle_state_change(struct bq24257_device *bq,
+ struct bq24257_state *new_state)
+{
+ int ret;
+ struct bq24257_state old_state;
+
+ mutex_lock(&bq->lock);
+ old_state = bq->state;
+ mutex_unlock(&bq->lock);
+
+ /*
+ * Handle BQ2425x state changes observing whether the D+/D- based input
+ * current limit autoset functionality is enabled.
+ */
+ if (!new_state->power_good) {
+ dev_dbg(bq->dev, "Power removed\n");
+ if (bq->iilimit_autoset_enable) {
+ cancel_delayed_work_sync(&bq->iilimit_setup_work);
+
+ /* activate D+/D- port detection algorithm */
+ ret = bq24257_field_write(bq, F_DPDM_EN, 1);
+ if (ret < 0)
+ goto error;
+ }
+ /*
+ * When power is removed always return to the default input
+ * current limit as configured during probe.
+ */
+ ret = bq24257_field_write(bq, F_IILIMIT, bq->init_data.iilimit);
+ if (ret < 0)
+ goto error;
+ } else if (!old_state.power_good) {
+ dev_dbg(bq->dev, "Power inserted\n");
+
+ if (bq->iilimit_autoset_enable)
+ /* configure input current limit */
+ schedule_delayed_work(&bq->iilimit_setup_work,
+ msecs_to_jiffies(BQ24257_ILIM_SET_DELAY));
+ } else if (new_state->fault == FAULT_NO_BAT) {
+ dev_warn(bq->dev, "Battery removed\n");
+ } else if (new_state->fault == FAULT_TIMER) {
+ dev_err(bq->dev, "Safety timer expired! Battery dead?\n");
+ }
+
+ return;
+
+error:
+ dev_err(bq->dev, "%s: Error communicating with the chip.\n", __func__);
+}
+
+static irqreturn_t bq24257_irq_handler_thread(int irq, void *private)
+{
+ int ret;
+ struct bq24257_device *bq = private;
+ struct bq24257_state state;
+
+ ret = bq24257_get_chip_state(bq, &state);
+ if (ret < 0)
+ return IRQ_HANDLED;
+
+ if (!bq24257_state_changed(bq, &state))
+ return IRQ_HANDLED;
+
+ dev_dbg(bq->dev, "irq(state changed): status/fault/pg = %d/%d/%d\n",
+ state.status, state.fault, state.power_good);
+
+ bq24257_handle_state_change(bq, &state);
+
+ mutex_lock(&bq->lock);
+ bq->state = state;
+ mutex_unlock(&bq->lock);
+
+ power_supply_changed(bq->charger);
+
+ return IRQ_HANDLED;
+}
+
+static int bq24257_hw_init(struct bq24257_device *bq)
+{
+ int ret;
+ int i;
+ struct bq24257_state state;
+
+ const struct {
+ int field;
+ u32 value;
+ } init_data[] = {
+ {F_ICHG, bq->init_data.ichg},
+ {F_VBAT, bq->init_data.vbat},
+ {F_ITERM, bq->init_data.iterm},
+ {F_VOVP, bq->init_data.vovp},
+ {F_VINDPM, bq->init_data.vindpm},
+ };
+
+ /*
+ * Disable the watchdog timer to prevent the IC from going back to
+ * default settings after 50 seconds of I2C inactivity.
+ */
+ ret = bq24257_field_write(bq, F_WD_EN, 0);
+ if (ret < 0)
+ return ret;
+
+ /* configure the charge currents and voltages */
+ for (i = 0; i < ARRAY_SIZE(init_data); i++) {
+ ret = bq24257_field_write(bq, init_data[i].field,
+ init_data[i].value);
+ if (ret < 0)
+ return ret;
+ }
+
+ ret = bq24257_get_chip_state(bq, &state);
+ if (ret < 0)
+ return ret;
+
+ mutex_lock(&bq->lock);
+ bq->state = state;
+ mutex_unlock(&bq->lock);
+
+ if (!bq->iilimit_autoset_enable) {
+ dev_dbg(bq->dev, "manually setting iilimit = %u\n",
+ bq->init_data.iilimit);
+
+ /* program fixed input current limit */
+ ret = bq24257_field_write(bq, F_IILIMIT,
+ bq->init_data.iilimit);
+ if (ret < 0)
+ return ret;
+ } else if (!state.power_good)
+ /* activate D+/D- detection algorithm */
+ ret = bq24257_field_write(bq, F_DPDM_EN, 1);
+ else if (state.fault != FAULT_NO_BAT)
+ ret = bq24257_iilimit_autoset(bq);
+
+ return ret;
+}
+
+static enum power_supply_property bq24257_power_supply_props[] = {
+ POWER_SUPPLY_PROP_MANUFACTURER,
+ POWER_SUPPLY_PROP_MODEL_NAME,
+ POWER_SUPPLY_PROP_STATUS,
+ POWER_SUPPLY_PROP_ONLINE,
+ POWER_SUPPLY_PROP_HEALTH,
+ POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT,
+ POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX,
+ POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE,
+ POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX,
+ POWER_SUPPLY_PROP_CHARGE_TERM_CURRENT,
+ POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT,
+};
+
+static char *bq24257_charger_supplied_to[] = {
+ "main-battery",
+};
+
+static const struct power_supply_desc bq24257_power_supply_desc = {
+ .name = "bq24257-charger",
+ .type = POWER_SUPPLY_TYPE_USB,
+ .properties = bq24257_power_supply_props,
+ .num_properties = ARRAY_SIZE(bq24257_power_supply_props),
+ .get_property = bq24257_power_supply_get_property,
+ .set_property = bq24257_power_supply_set_property,
+ .property_is_writeable = bq24257_power_supply_property_is_writeable,
+};
+
+static ssize_t bq24257_show_ovp_voltage(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct power_supply *psy = dev_get_drvdata(dev);
+ struct bq24257_device *bq = power_supply_get_drvdata(psy);
+
+ return scnprintf(buf, PAGE_SIZE, "%u\n",
+ bq24257_vovp_map[bq->init_data.vovp]);
+}
+
+static ssize_t bq24257_show_in_dpm_voltage(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct power_supply *psy = dev_get_drvdata(dev);
+ struct bq24257_device *bq = power_supply_get_drvdata(psy);
+
+ return scnprintf(buf, PAGE_SIZE, "%u\n",
+ bq24257_vindpm_map[bq->init_data.vindpm]);
+}
+
+static ssize_t bq24257_sysfs_show_enable(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct power_supply *psy = dev_get_drvdata(dev);
+ struct bq24257_device *bq = power_supply_get_drvdata(psy);
+ int ret;
+
+ if (strcmp(attr->attr.name, "high_impedance_enable") == 0)
+ ret = bq24257_field_read(bq, F_HZ_MODE);
+ else if (strcmp(attr->attr.name, "sysoff_enable") == 0)
+ ret = bq24257_field_read(bq, F_SYSOFF);
+ else
+ return -EINVAL;
+
+ if (ret < 0)
+ return ret;
+
+ return scnprintf(buf, PAGE_SIZE, "%d\n", ret);
+}
+
+static ssize_t bq24257_sysfs_set_enable(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf,
+ size_t count)
+{
+ struct power_supply *psy = dev_get_drvdata(dev);
+ struct bq24257_device *bq = power_supply_get_drvdata(psy);
+ long val;
+ int ret;
+
+ if (kstrtol(buf, 10, &val) < 0)
+ return -EINVAL;
+
+ if (strcmp(attr->attr.name, "high_impedance_enable") == 0)
+ ret = bq24257_field_write(bq, F_HZ_MODE, (bool)val);
+ else if (strcmp(attr->attr.name, "sysoff_enable") == 0)
+ ret = bq24257_field_write(bq, F_SYSOFF, (bool)val);
+ else
+ return -EINVAL;
+
+ if (ret < 0)
+ return ret;
+
+ return count;
+}
+
+static DEVICE_ATTR(ovp_voltage, S_IRUGO, bq24257_show_ovp_voltage, NULL);
+static DEVICE_ATTR(in_dpm_voltage, S_IRUGO, bq24257_show_in_dpm_voltage, NULL);
+static DEVICE_ATTR(high_impedance_enable, S_IWUSR | S_IRUGO,
+ bq24257_sysfs_show_enable, bq24257_sysfs_set_enable);
+static DEVICE_ATTR(sysoff_enable, S_IWUSR | S_IRUGO,
+ bq24257_sysfs_show_enable, bq24257_sysfs_set_enable);
+
+static struct attribute *bq24257_charger_sysfs_attrs[] = {
+ &dev_attr_ovp_voltage.attr,
+ &dev_attr_in_dpm_voltage.attr,
+ &dev_attr_high_impedance_enable.attr,
+ &dev_attr_sysoff_enable.attr,
+ NULL,
+};
+
+ATTRIBUTE_GROUPS(bq24257_charger_sysfs);
+
+static int bq24257_power_supply_init(struct bq24257_device *bq)
+{
+ struct power_supply_config psy_cfg = { .drv_data = bq, };
+
+ psy_cfg.attr_grp = bq24257_charger_sysfs_groups;
+ psy_cfg.supplied_to = bq24257_charger_supplied_to;
+ psy_cfg.num_supplicants = ARRAY_SIZE(bq24257_charger_supplied_to);
+
+ bq->charger = devm_power_supply_register(bq->dev,
+ &bq24257_power_supply_desc,
+ &psy_cfg);
+
+ return PTR_ERR_OR_ZERO(bq->charger);
+}
+
+static void bq24257_pg_gpio_probe(struct bq24257_device *bq)
+{
+ bq->pg = devm_gpiod_get_optional(bq->dev, BQ24257_PG_GPIO, GPIOD_IN);
+
+ if (PTR_ERR(bq->pg) == -EPROBE_DEFER) {
+ dev_info(bq->dev, "probe retry requested for PG pin\n");
+ return;
+ } else if (IS_ERR(bq->pg)) {
+ dev_err(bq->dev, "error probing PG pin\n");
+ bq->pg = NULL;
+ return;
+ }
+
+ if (bq->pg)
+ dev_dbg(bq->dev, "probed PG pin = %d\n", desc_to_gpio(bq->pg));
+}
+
+static int bq24257_fw_probe(struct bq24257_device *bq)
+{
+ int ret;
+ u32 property;
+
+ /* Required properties */
+ ret = device_property_read_u32(bq->dev, "ti,charge-current", &property);
+ if (ret < 0)
+ return ret;
+
+ bq->init_data.ichg = bq24257_find_idx(property, bq24257_ichg_map,
+ BQ24257_ICHG_MAP_SIZE);
+
+ ret = device_property_read_u32(bq->dev, "ti,battery-regulation-voltage",
+ &property);
+ if (ret < 0)
+ return ret;
+
+ bq->init_data.vbat = bq24257_find_idx(property, bq24257_vbat_map,
+ BQ24257_VBAT_MAP_SIZE);
+
+ ret = device_property_read_u32(bq->dev, "ti,termination-current",
+ &property);
+ if (ret < 0)
+ return ret;
+
+ bq->init_data.iterm = bq24257_find_idx(property, bq24257_iterm_map,
+ BQ24257_ITERM_MAP_SIZE);
+
+ /* Optional properties. If not provided use reasonable default. */
+ ret = device_property_read_u32(bq->dev, "ti,current-limit",
+ &property);
+ if (ret < 0) {
+ bq->iilimit_autoset_enable = true;
+
+ /*
+ * Explicitly set a default value which will be needed for
+ * devices that don't support the automatic setting of the input
+ * current limit through the charger type detection mechanism.
+ */
+ bq->init_data.iilimit = IILIMIT_500;
+ } else
+ bq->init_data.iilimit =
+ bq24257_find_idx(property,
+ bq24257_iilimit_map,
+ BQ24257_IILIMIT_MAP_SIZE);
+
+ ret = device_property_read_u32(bq->dev, "ti,ovp-voltage",
+ &property);
+ if (ret < 0)
+ bq->init_data.vovp = VOVP_6500;
+ else
+ bq->init_data.vovp = bq24257_find_idx(property,
+ bq24257_vovp_map,
+ BQ24257_VOVP_MAP_SIZE);
+
+ ret = device_property_read_u32(bq->dev, "ti,in-dpm-voltage",
+ &property);
+ if (ret < 0)
+ bq->init_data.vindpm = VINDPM_4360;
+ else
+ bq->init_data.vindpm =
+ bq24257_find_idx(property,
+ bq24257_vindpm_map,
+ BQ24257_VINDPM_MAP_SIZE);
+
+ return 0;
+}
+
+static int bq24257_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct i2c_adapter *adapter = client->adapter;
+ struct device *dev = &client->dev;
+ const struct acpi_device_id *acpi_id;
+ struct bq24257_device *bq;
+ int ret;
+ int i;
+
+ if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) {
+ dev_err(dev, "No support for SMBUS_BYTE_DATA\n");
+ return -ENODEV;
+ }
+
+ bq = devm_kzalloc(dev, sizeof(*bq), GFP_KERNEL);
+ if (!bq)
+ return -ENOMEM;
+
+ bq->client = client;
+ bq->dev = dev;
+
+ if (ACPI_HANDLE(dev)) {
+ acpi_id = acpi_match_device(dev->driver->acpi_match_table,
+ &client->dev);
+ if (!acpi_id) {
+ dev_err(dev, "Failed to match ACPI device\n");
+ return -ENODEV;
+ }
+ bq->chip = (enum bq2425x_chip)acpi_id->driver_data;
+ } else {
+ bq->chip = (enum bq2425x_chip)id->driver_data;
+ }
+
+ mutex_init(&bq->lock);
+
+ bq->rmap = devm_regmap_init_i2c(client, &bq24257_regmap_config);
+ if (IS_ERR(bq->rmap)) {
+ dev_err(dev, "failed to allocate register map\n");
+ return PTR_ERR(bq->rmap);
+ }
+
+ for (i = 0; i < ARRAY_SIZE(bq24257_reg_fields); i++) {
+ const struct reg_field *reg_fields = bq24257_reg_fields;
+
+ bq->rmap_fields[i] = devm_regmap_field_alloc(dev, bq->rmap,
+ reg_fields[i]);
+ if (IS_ERR(bq->rmap_fields[i])) {
+ dev_err(dev, "cannot allocate regmap field\n");
+ return PTR_ERR(bq->rmap_fields[i]);
+ }
+ }
+
+ i2c_set_clientdata(client, bq);
+
+ if (!dev->platform_data) {
+ ret = bq24257_fw_probe(bq);
+ if (ret < 0) {
+ dev_err(dev, "Cannot read device properties.\n");
+ return ret;
+ }
+ } else {
+ return -ENODEV;
+ }
+
+ /*
+ * The BQ24250 doesn't support the D+/D- based charger type detection
+ * used for the automatic setting of the input current limit setting so
+ * explicitly disable that feature.
+ */
+ if (bq->chip == BQ24250)
+ bq->iilimit_autoset_enable = false;
+
+ if (bq->iilimit_autoset_enable)
+ INIT_DELAYED_WORK(&bq->iilimit_setup_work,
+ bq24257_iilimit_setup_work);
+
+ /*
+ * The BQ24250 doesn't have a dedicated Power Good (PG) pin so let's
+ * not probe for it and instead use a SW-based approach to determine
+ * the PG state. We also use a SW-based approach for all other devices
+ * if the PG pin is either not defined or can't be probed.
+ */
+ if (bq->chip != BQ24250)
+ bq24257_pg_gpio_probe(bq);
+
+ if (PTR_ERR(bq->pg) == -EPROBE_DEFER)
+ return PTR_ERR(bq->pg);
+ else if (!bq->pg)
+ dev_info(bq->dev, "using SW-based power-good detection\n");
+
+ /* reset all registers to defaults */
+ ret = bq24257_field_write(bq, F_RESET, 1);
+ if (ret < 0)
+ return ret;
+
+ /*
+ * Put the RESET bit back to 0, in cache. For some reason the HW always
+ * returns 1 on this bit, so this is the only way to avoid resetting the
+ * chip every time we update another field in this register.
+ */
+ ret = bq24257_field_write(bq, F_RESET, 0);
+ if (ret < 0)
+ return ret;
+
+ ret = bq24257_hw_init(bq);
+ if (ret < 0) {
+ dev_err(dev, "Cannot initialize the chip.\n");
+ return ret;
+ }
+
+ ret = bq24257_power_supply_init(bq);
+ if (ret < 0) {
+ dev_err(dev, "Failed to register power supply\n");
+ return ret;
+ }
+
+ ret = devm_request_threaded_irq(dev, client->irq, NULL,
+ bq24257_irq_handler_thread,
+ IRQF_TRIGGER_FALLING |
+ IRQF_TRIGGER_RISING | IRQF_ONESHOT,
+ bq2425x_chip_name[bq->chip], bq);
+ if (ret) {
+ dev_err(dev, "Failed to request IRQ #%d\n", client->irq);
+ return ret;
+ }
+
+ return 0;
+}
+
+static int bq24257_remove(struct i2c_client *client)
+{
+ struct bq24257_device *bq = i2c_get_clientdata(client);
+
+ if (bq->iilimit_autoset_enable)
+ cancel_delayed_work_sync(&bq->iilimit_setup_work);
+
+ bq24257_field_write(bq, F_RESET, 1); /* reset to defaults */
+
+ return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int bq24257_suspend(struct device *dev)
+{
+ struct bq24257_device *bq = dev_get_drvdata(dev);
+ int ret = 0;
+
+ if (bq->iilimit_autoset_enable)
+ cancel_delayed_work_sync(&bq->iilimit_setup_work);
+
+ /* reset all registers to default (and activate standalone mode) */
+ ret = bq24257_field_write(bq, F_RESET, 1);
+ if (ret < 0)
+ dev_err(bq->dev, "Cannot reset chip to standalone mode.\n");
+
+ return ret;
+}
+
+static int bq24257_resume(struct device *dev)
+{
+ int ret;
+ struct bq24257_device *bq = dev_get_drvdata(dev);
+
+ ret = regcache_drop_region(bq->rmap, BQ24257_REG_1, BQ24257_REG_7);
+ if (ret < 0)
+ return ret;
+
+ ret = bq24257_field_write(bq, F_RESET, 0);
+ if (ret < 0)
+ return ret;
+
+ ret = bq24257_hw_init(bq);
+ if (ret < 0) {
+ dev_err(bq->dev, "Cannot init chip after resume.\n");
+ return ret;
+ }
+
+ /* signal userspace, maybe state changed while suspended */
+ power_supply_changed(bq->charger);
+
+ return 0;
+}
+#endif
+
+static const struct dev_pm_ops bq24257_pm = {
+ SET_SYSTEM_SLEEP_PM_OPS(bq24257_suspend, bq24257_resume)
+};
+
+static const struct i2c_device_id bq24257_i2c_ids[] = {
+ { "bq24250", BQ24250 },
+ { "bq24251", BQ24251 },
+ { "bq24257", BQ24257 },
+ {},
+};
+MODULE_DEVICE_TABLE(i2c, bq24257_i2c_ids);
+
+static const struct of_device_id bq24257_of_match[] = {
+ { .compatible = "ti,bq24250", },
+ { .compatible = "ti,bq24251", },
+ { .compatible = "ti,bq24257", },
+ { },
+};
+MODULE_DEVICE_TABLE(of, bq24257_of_match);
+
+#ifdef CONFIG_ACPI
+static const struct acpi_device_id bq24257_acpi_match[] = {
+ { "BQ242500", BQ24250 },
+ { "BQ242510", BQ24251 },
+ { "BQ242570", BQ24257 },
+ {},
+};
+MODULE_DEVICE_TABLE(acpi, bq24257_acpi_match);
+#endif
+
+static struct i2c_driver bq24257_driver = {
+ .driver = {
+ .name = "bq24257-charger",
+ .of_match_table = of_match_ptr(bq24257_of_match),
+ .acpi_match_table = ACPI_PTR(bq24257_acpi_match),
+ .pm = &bq24257_pm,
+ },
+ .probe = bq24257_probe,
+ .remove = bq24257_remove,
+ .id_table = bq24257_i2c_ids,
+};
+module_i2c_driver(bq24257_driver);
+
+MODULE_AUTHOR("Laurentiu Palcu <laurentiu.palcu@intel.com>");
+MODULE_DESCRIPTION("bq24257 charger driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/power/supply/bq24735-charger.c b/drivers/power/supply/bq24735-charger.c
new file mode 100644
index 000000000..6931e1d82
--- /dev/null
+++ b/drivers/power/supply/bq24735-charger.c
@@ -0,0 +1,521 @@
+/*
+ * Battery charger driver for TI BQ24735
+ *
+ * Copyright (c) 2013, NVIDIA CORPORATION. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation;
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+ */
+
+#include <linux/err.h>
+#include <linux/gpio.h>
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/gpio/consumer.h>
+#include <linux/power_supply.h>
+#include <linux/slab.h>
+
+#include <linux/power/bq24735-charger.h>
+
+#define BQ24735_CHG_OPT 0x12
+#define BQ24735_CHG_OPT_CHARGE_DISABLE (1 << 0)
+#define BQ24735_CHG_OPT_AC_PRESENT (1 << 4)
+#define BQ24735_CHARGE_CURRENT 0x14
+#define BQ24735_CHARGE_CURRENT_MASK 0x1fc0
+#define BQ24735_CHARGE_VOLTAGE 0x15
+#define BQ24735_CHARGE_VOLTAGE_MASK 0x7ff0
+#define BQ24735_INPUT_CURRENT 0x3f
+#define BQ24735_INPUT_CURRENT_MASK 0x1f80
+#define BQ24735_MANUFACTURER_ID 0xfe
+#define BQ24735_DEVICE_ID 0xff
+
+struct bq24735 {
+ struct power_supply *charger;
+ struct power_supply_desc charger_desc;
+ struct i2c_client *client;
+ struct bq24735_platform *pdata;
+ struct mutex lock;
+ struct gpio_desc *status_gpio;
+ struct delayed_work poll;
+ u32 poll_interval;
+ bool charging;
+};
+
+static inline struct bq24735 *to_bq24735(struct power_supply *psy)
+{
+ return power_supply_get_drvdata(psy);
+}
+
+static enum power_supply_property bq24735_charger_properties[] = {
+ POWER_SUPPLY_PROP_STATUS,
+ POWER_SUPPLY_PROP_ONLINE,
+};
+
+static int bq24735_charger_property_is_writeable(struct power_supply *psy,
+ enum power_supply_property psp)
+{
+ switch (psp) {
+ case POWER_SUPPLY_PROP_STATUS:
+ return 1;
+ default:
+ break;
+ }
+
+ return 0;
+}
+
+static inline int bq24735_write_word(struct i2c_client *client, u8 reg,
+ u16 value)
+{
+ return i2c_smbus_write_word_data(client, reg, value);
+}
+
+static inline int bq24735_read_word(struct i2c_client *client, u8 reg)
+{
+ return i2c_smbus_read_word_data(client, reg);
+}
+
+static int bq24735_update_word(struct i2c_client *client, u8 reg,
+ u16 mask, u16 value)
+{
+ unsigned int tmp;
+ int ret;
+
+ ret = bq24735_read_word(client, reg);
+ if (ret < 0)
+ return ret;
+
+ tmp = ret & ~mask;
+ tmp |= value & mask;
+
+ return bq24735_write_word(client, reg, tmp);
+}
+
+static int bq24735_config_charger(struct bq24735 *charger)
+{
+ struct bq24735_platform *pdata = charger->pdata;
+ int ret;
+ u16 value;
+
+ if (pdata->ext_control)
+ return 0;
+
+ if (pdata->charge_current) {
+ value = pdata->charge_current & BQ24735_CHARGE_CURRENT_MASK;
+
+ ret = bq24735_write_word(charger->client,
+ BQ24735_CHARGE_CURRENT, value);
+ if (ret < 0) {
+ dev_err(&charger->client->dev,
+ "Failed to write charger current : %d\n",
+ ret);
+ return ret;
+ }
+ }
+
+ if (pdata->charge_voltage) {
+ value = pdata->charge_voltage & BQ24735_CHARGE_VOLTAGE_MASK;
+
+ ret = bq24735_write_word(charger->client,
+ BQ24735_CHARGE_VOLTAGE, value);
+ if (ret < 0) {
+ dev_err(&charger->client->dev,
+ "Failed to write charger voltage : %d\n",
+ ret);
+ return ret;
+ }
+ }
+
+ if (pdata->input_current) {
+ value = pdata->input_current & BQ24735_INPUT_CURRENT_MASK;
+
+ ret = bq24735_write_word(charger->client,
+ BQ24735_INPUT_CURRENT, value);
+ if (ret < 0) {
+ dev_err(&charger->client->dev,
+ "Failed to write input current : %d\n",
+ ret);
+ return ret;
+ }
+ }
+
+ return 0;
+}
+
+static inline int bq24735_enable_charging(struct bq24735 *charger)
+{
+ int ret;
+
+ if (charger->pdata->ext_control)
+ return 0;
+
+ ret = bq24735_config_charger(charger);
+ if (ret)
+ return ret;
+
+ return bq24735_update_word(charger->client, BQ24735_CHG_OPT,
+ BQ24735_CHG_OPT_CHARGE_DISABLE, 0);
+}
+
+static inline int bq24735_disable_charging(struct bq24735 *charger)
+{
+ if (charger->pdata->ext_control)
+ return 0;
+
+ return bq24735_update_word(charger->client, BQ24735_CHG_OPT,
+ BQ24735_CHG_OPT_CHARGE_DISABLE,
+ BQ24735_CHG_OPT_CHARGE_DISABLE);
+}
+
+static bool bq24735_charger_is_present(struct bq24735 *charger)
+{
+ if (charger->status_gpio) {
+ return !gpiod_get_value_cansleep(charger->status_gpio);
+ } else {
+ int ac = 0;
+
+ ac = bq24735_read_word(charger->client, BQ24735_CHG_OPT);
+ if (ac < 0) {
+ dev_dbg(&charger->client->dev,
+ "Failed to read charger options : %d\n",
+ ac);
+ return false;
+ }
+ return (ac & BQ24735_CHG_OPT_AC_PRESENT) ? true : false;
+ }
+
+ return false;
+}
+
+static int bq24735_charger_is_charging(struct bq24735 *charger)
+{
+ int ret;
+
+ if (!bq24735_charger_is_present(charger))
+ return 0;
+
+ ret = bq24735_read_word(charger->client, BQ24735_CHG_OPT);
+ if (ret < 0)
+ return ret;
+
+ return !(ret & BQ24735_CHG_OPT_CHARGE_DISABLE);
+}
+
+static void bq24735_update(struct bq24735 *charger)
+{
+ mutex_lock(&charger->lock);
+
+ if (charger->charging && bq24735_charger_is_present(charger))
+ bq24735_enable_charging(charger);
+ else
+ bq24735_disable_charging(charger);
+
+ mutex_unlock(&charger->lock);
+
+ power_supply_changed(charger->charger);
+}
+
+static irqreturn_t bq24735_charger_isr(int irq, void *devid)
+{
+ struct power_supply *psy = devid;
+ struct bq24735 *charger = to_bq24735(psy);
+
+ bq24735_update(charger);
+
+ return IRQ_HANDLED;
+}
+
+static void bq24735_poll(struct work_struct *work)
+{
+ struct bq24735 *charger = container_of(work, struct bq24735, poll.work);
+
+ bq24735_update(charger);
+
+ schedule_delayed_work(&charger->poll,
+ msecs_to_jiffies(charger->poll_interval));
+}
+
+static int bq24735_charger_get_property(struct power_supply *psy,
+ enum power_supply_property psp,
+ union power_supply_propval *val)
+{
+ struct bq24735 *charger = to_bq24735(psy);
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_ONLINE:
+ val->intval = bq24735_charger_is_present(charger) ? 1 : 0;
+ break;
+ case POWER_SUPPLY_PROP_STATUS:
+ switch (bq24735_charger_is_charging(charger)) {
+ case 1:
+ val->intval = POWER_SUPPLY_STATUS_CHARGING;
+ break;
+ case 0:
+ val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING;
+ break;
+ default:
+ val->intval = POWER_SUPPLY_STATUS_UNKNOWN;
+ break;
+ }
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int bq24735_charger_set_property(struct power_supply *psy,
+ enum power_supply_property psp,
+ const union power_supply_propval *val)
+{
+ struct bq24735 *charger = to_bq24735(psy);
+ int ret;
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_STATUS:
+ switch (val->intval) {
+ case POWER_SUPPLY_STATUS_CHARGING:
+ mutex_lock(&charger->lock);
+ charger->charging = true;
+ ret = bq24735_enable_charging(charger);
+ mutex_unlock(&charger->lock);
+ if (ret)
+ return ret;
+ break;
+ case POWER_SUPPLY_STATUS_DISCHARGING:
+ case POWER_SUPPLY_STATUS_NOT_CHARGING:
+ mutex_lock(&charger->lock);
+ charger->charging = false;
+ ret = bq24735_disable_charging(charger);
+ mutex_unlock(&charger->lock);
+ if (ret)
+ return ret;
+ break;
+ default:
+ return -EINVAL;
+ }
+ power_supply_changed(psy);
+ break;
+ default:
+ return -EPERM;
+ }
+
+ return 0;
+}
+
+static struct bq24735_platform *bq24735_parse_dt_data(struct i2c_client *client)
+{
+ struct bq24735_platform *pdata;
+ struct device_node *np = client->dev.of_node;
+ u32 val;
+ int ret;
+
+ pdata = devm_kzalloc(&client->dev, sizeof(*pdata), GFP_KERNEL);
+ if (!pdata) {
+ dev_err(&client->dev,
+ "Memory alloc for bq24735 pdata failed\n");
+ return NULL;
+ }
+
+ ret = of_property_read_u32(np, "ti,charge-current", &val);
+ if (!ret)
+ pdata->charge_current = val;
+
+ ret = of_property_read_u32(np, "ti,charge-voltage", &val);
+ if (!ret)
+ pdata->charge_voltage = val;
+
+ ret = of_property_read_u32(np, "ti,input-current", &val);
+ if (!ret)
+ pdata->input_current = val;
+
+ pdata->ext_control = of_property_read_bool(np, "ti,external-control");
+
+ return pdata;
+}
+
+static int bq24735_charger_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ int ret;
+ struct bq24735 *charger;
+ struct power_supply_desc *supply_desc;
+ struct power_supply_config psy_cfg = {};
+ char *name;
+
+ charger = devm_kzalloc(&client->dev, sizeof(*charger), GFP_KERNEL);
+ if (!charger)
+ return -ENOMEM;
+
+ mutex_init(&charger->lock);
+ charger->charging = true;
+ charger->pdata = client->dev.platform_data;
+
+ if (IS_ENABLED(CONFIG_OF) && !charger->pdata && client->dev.of_node)
+ charger->pdata = bq24735_parse_dt_data(client);
+
+ if (!charger->pdata) {
+ dev_err(&client->dev, "no platform data provided\n");
+ return -EINVAL;
+ }
+
+ name = (char *)charger->pdata->name;
+ if (!name) {
+ name = devm_kasprintf(&client->dev, GFP_KERNEL,
+ "bq24735@%s",
+ dev_name(&client->dev));
+ if (!name) {
+ dev_err(&client->dev, "Failed to alloc device name\n");
+ return -ENOMEM;
+ }
+ }
+
+ charger->client = client;
+
+ supply_desc = &charger->charger_desc;
+
+ supply_desc->name = name;
+ supply_desc->type = POWER_SUPPLY_TYPE_MAINS;
+ supply_desc->properties = bq24735_charger_properties;
+ supply_desc->num_properties = ARRAY_SIZE(bq24735_charger_properties);
+ supply_desc->get_property = bq24735_charger_get_property;
+ supply_desc->set_property = bq24735_charger_set_property;
+ supply_desc->property_is_writeable =
+ bq24735_charger_property_is_writeable;
+
+ psy_cfg.supplied_to = charger->pdata->supplied_to;
+ psy_cfg.num_supplicants = charger->pdata->num_supplicants;
+ psy_cfg.of_node = client->dev.of_node;
+ psy_cfg.drv_data = charger;
+
+ i2c_set_clientdata(client, charger);
+
+ charger->status_gpio = devm_gpiod_get_optional(&client->dev,
+ "ti,ac-detect",
+ GPIOD_IN);
+ if (IS_ERR(charger->status_gpio)) {
+ ret = PTR_ERR(charger->status_gpio);
+ dev_err(&client->dev, "Getting gpio failed: %d\n", ret);
+ return ret;
+ }
+
+ if (bq24735_charger_is_present(charger)) {
+ ret = bq24735_read_word(client, BQ24735_MANUFACTURER_ID);
+ if (ret < 0) {
+ dev_err(&client->dev, "Failed to read manufacturer id : %d\n",
+ ret);
+ return ret;
+ } else if (ret != 0x0040) {
+ dev_err(&client->dev,
+ "manufacturer id mismatch. 0x0040 != 0x%04x\n", ret);
+ return -ENODEV;
+ }
+
+ ret = bq24735_read_word(client, BQ24735_DEVICE_ID);
+ if (ret < 0) {
+ dev_err(&client->dev, "Failed to read device id : %d\n", ret);
+ return ret;
+ } else if (ret != 0x000B) {
+ dev_err(&client->dev,
+ "device id mismatch. 0x000b != 0x%04x\n", ret);
+ return -ENODEV;
+ }
+
+ ret = bq24735_enable_charging(charger);
+ if (ret < 0) {
+ dev_err(&client->dev, "Failed to enable charging\n");
+ return ret;
+ }
+ }
+
+ charger->charger = devm_power_supply_register(&client->dev, supply_desc,
+ &psy_cfg);
+ if (IS_ERR(charger->charger)) {
+ ret = PTR_ERR(charger->charger);
+ dev_err(&client->dev, "Failed to register power supply: %d\n",
+ ret);
+ return ret;
+ }
+
+ if (client->irq) {
+ ret = devm_request_threaded_irq(&client->dev, client->irq,
+ NULL, bq24735_charger_isr,
+ IRQF_TRIGGER_RISING |
+ IRQF_TRIGGER_FALLING |
+ IRQF_ONESHOT,
+ supply_desc->name,
+ charger->charger);
+ if (ret) {
+ dev_err(&client->dev,
+ "Unable to register IRQ %d err %d\n",
+ client->irq, ret);
+ return ret;
+ }
+ } else {
+ ret = device_property_read_u32(&client->dev, "poll-interval",
+ &charger->poll_interval);
+ if (ret)
+ return 0;
+ if (!charger->poll_interval)
+ return 0;
+
+ INIT_DELAYED_WORK(&charger->poll, bq24735_poll);
+ schedule_delayed_work(&charger->poll,
+ msecs_to_jiffies(charger->poll_interval));
+ }
+
+ return 0;
+}
+
+static int bq24735_charger_remove(struct i2c_client *client)
+{
+ struct bq24735 *charger = i2c_get_clientdata(client);
+
+ if (charger->poll_interval)
+ cancel_delayed_work_sync(&charger->poll);
+
+ return 0;
+}
+
+static const struct i2c_device_id bq24735_charger_id[] = {
+ { "bq24735-charger", 0 },
+ {}
+};
+MODULE_DEVICE_TABLE(i2c, bq24735_charger_id);
+
+static const struct of_device_id bq24735_match_ids[] = {
+ { .compatible = "ti,bq24735", },
+ { /* end */ }
+};
+MODULE_DEVICE_TABLE(of, bq24735_match_ids);
+
+static struct i2c_driver bq24735_charger_driver = {
+ .driver = {
+ .name = "bq24735-charger",
+ .of_match_table = bq24735_match_ids,
+ },
+ .probe = bq24735_charger_probe,
+ .remove = bq24735_charger_remove,
+ .id_table = bq24735_charger_id,
+};
+
+module_i2c_driver(bq24735_charger_driver);
+
+MODULE_DESCRIPTION("bq24735 battery charging driver");
+MODULE_AUTHOR("Darbha Sriharsha <dsriharsha@nvidia.com>");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/power/supply/bq2515x_charger.c b/drivers/power/supply/bq2515x_charger.c
new file mode 100644
index 000000000..374b112f7
--- /dev/null
+++ b/drivers/power/supply/bq2515x_charger.c
@@ -0,0 +1,1169 @@
+// SPDX-License-Identifier: GPL-2.0
+// BQ2515X Battery Charger Driver
+// Copyright (C) 2020 Texas Instruments Incorporated - https://www.ti.com/
+
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/gpio/consumer.h>
+#include <linux/power_supply.h>
+#include <linux/regmap.h>
+#include <linux/types.h>
+
+#define BQ2515X_MANUFACTURER "Texas Instruments"
+
+#define BQ2515X_STAT0 0x00
+#define BQ2515X_STAT1 0x01
+#define BQ2515X_STAT2 0x02
+#define BQ2515X_FLAG0 0x03
+#define BQ2515X_FLAG1 0x04
+#define BQ2515X_FLAG2 0x05
+#define BQ2515X_FLAG3 0x06
+#define BQ2515X_MASK0 0x07
+#define BQ2515X_MASK1 0x08
+#define BQ2515X_MASK2 0x09
+#define BQ2515X_MASK3 0x0a
+#define BQ2515X_VBAT_CTRL 0x12
+#define BQ2515X_ICHG_CTRL 0x13
+#define BQ2515X_PCHRGCTRL 0x14
+#define BQ2515X_TERMCTRL 0x15
+#define BQ2515X_BUVLO 0x16
+#define BQ2515X_CHARGERCTRL0 0x17
+#define BQ2515X_CHARGERCTRL1 0x18
+#define BQ2515X_ILIMCTRL 0x19
+#define BQ2515X_LDOCTRL 0x1d
+#define BQ2515X_MRCTRL 0x30
+#define BQ2515X_ICCTRL0 0x35
+#define BQ2515X_ICCTRL1 0x36
+#define BQ2515X_ICCTRL2 0x37
+#define BQ2515X_ADCCTRL0 0x40
+#define BQ2515X_ADCCTRL1 0x41
+#define BQ2515X_ADC_VBAT_M 0x42
+#define BQ2515X_ADC_VBAT_L 0x43
+#define BQ2515X_ADC_TS_M 0x44
+#define BQ2515X_ADC_TS_L 0x45
+#define BQ2515X_ADC_ICHG_M 0x46
+#define BQ2515X_ADC_ICHG_L 0x47
+#define BQ2515X_ADC_ADCIN_M 0x48
+#define BQ2515X_ADC_ADCIN_L 0x49
+#define BQ2515X_ADC_VIN_M 0x4a
+#define BQ2515X_ADC_VIN_L 0x4b
+#define BQ2515X_ADC_PMID_M 0x4c
+#define BQ2515X_ADC_PMID_L 0x4d
+#define BQ2515X_ADC_IIN_M 0x4e
+#define BQ2515X_ADC_IIN_L 0x4f
+#define BQ2515X_ADC_COMP1_M 0x52
+#define BQ2515X_ADC_COMP1_L 0X53
+#define BQ2515X_ADC_COMP2_M 0X54
+#define BQ2515X_ADC_COMP2_L 0x55
+#define BQ2515X_ADC_COMP3_M 0x56
+#define BQ2515X_ADC_COMP3_L 0x57
+#define BQ2515X_ADC_READ_EN 0x58
+#define BQ2515X_TS_FASTCHGCTRL 0x61
+#define BQ2515X_TS_COLD 0x62
+#define BQ2515X_TS_COOL 0x63
+#define BQ2515X_TS_WARM 0x64
+#define BQ2515X_TS_HOT 0x65
+#define BQ2515X_DEVICE_ID 0x6f
+
+#define BQ2515X_DEFAULT_ICHG_UA 10000
+#define BQ25150_DEFAULT_ILIM_UA 100000
+#define BQ25155_DEFAULT_ILIM_UA 500000
+#define BQ2515X_DEFAULT_VBAT_REG_UV 4200000
+#define BQ2515X_DEFAULT_IPRECHARGE_UA 2500
+
+#define BQ2515X_DIVISOR 65536
+#define BQ2515X_VBAT_BASE_VOLT 3600000
+#define BQ2515X_VBAT_REG_MAX 4600000
+#define BQ2515X_VBAT_REG_MIN 3600000
+#define BQ2515X_VBAT_STEP_UV 10000
+#define BQ2515X_UV_FACTOR 1000000
+#define BQ2515X_VBAT_MULTIPLIER 6
+#define BQ2515X_ICHG_DIVISOR 52429
+#define BQ2515X_ICHG_CURR_STEP_THRESH_UA 318750
+#define BQ2515X_ICHG_MIN_UA 0
+#define BQ2515X_ICHG_MAX_UA 500000
+#define BQ2515X_ICHG_RNG_1B0_UA 1250
+#define BQ2515X_ICHG_RNG_1B1_UA 2500
+#define BQ2515X_VLOWV_SEL_1B0_UV 3000000
+#define BQ2515X_VLOWV_SEL_1B1_UV 2800000
+#define BQ2515X_PRECHRG_ICHRG_RNGE_1875_UA 18750
+#define BQ2515X_PRECHRG_ICHRG_RNGE_3750_UA 37500
+#define BQ2515X_TWAKE2_MIN_US 1700000
+#define BQ2515X_TWAKE2_MAX_US 2300000
+
+#define BQ2515X_ILIM_150MA 0x2
+#define BQ2515X_ILIM_MASK 0x7
+#define BQ2515X_ILIM_MIN 50000
+#define BQ2515X_ILIM_MAX 600000
+#define BQ2515X_HEALTH_MASK 0xf
+#define BQ2515X_ICHGRNG_MASK 0x80
+#define BQ2515X_STAT0_MASK 0x0f
+#define BQ2515X_STAT1_MASK 0x1f
+#define BQ2515X_PRECHARGE_MASK 0x1f
+
+#define BQ2515X_TS_HOT_STAT BIT(0)
+#define BQ2515X_TS_WARM_STAT BIT(1)
+#define BQ2515X_TS_COOL_STAT BIT(2)
+#define BQ2515X_TS_COLD_STAT BIT(3)
+#define BQ2515X_SAFETY_TIMER_EXP BIT(5)
+
+#define BQ2515X_EN_VBAT_READ BIT(3)
+#define BQ2515X_EN_ICHG_READ BIT(5)
+
+#define BQ2515X_VIN_GOOD BIT(0)
+#define BQ2515X_CHRG_DONE BIT(5)
+#define BQ2515X_CV_CHRG_MODE BIT(6)
+
+#define BQ2515X_VIN_OVP_FAULT_STAT BIT(7)
+
+#define BQ2515X_WATCHDOG_DISABLE BIT(4)
+
+#define BQ2515X_ICHARGE_RANGE BIT(7)
+
+#define BQ2515X_VLOWV_SEL BIT(5)
+
+#define BQ2515X_CHARGER_DISABLE BIT(0)
+
+#define BQ2515X_HWRESET_14S_WD BIT(1)
+
+static const int bq2515x_ilim_lvl_values[] = {
+ 50000, 100000, 150000, 200000, 300000, 400000, 500000, 600000
+};
+
+/**
+ * struct bq2515x_init_data -
+ * @ilim: input current limit
+ * @ichg: fast charge current
+ * @vbatreg: battery regulation voltage
+ * @iprechg: precharge current
+ */
+struct bq2515x_init_data {
+ int ilim;
+ int ichg;
+ int vbatreg;
+ int iprechg;
+};
+
+enum bq2515x_id {
+ BQ25150,
+ BQ25155,
+};
+
+/**
+ * struct bq2515x_device -
+ * @mains: mains properties
+ * @battery: battery properties
+ * @regmap: register map structure
+ * @dev: device structure
+ *
+ * @reset_gpio: manual reset (MR) pin
+ * @powerdown_gpio: low power mode pin
+ * @ac_detect_gpio: power good (PG) pin
+ * @ce_gpio: charge enable (CE) pin
+ *
+ * @model_name: string value describing device model
+ * @device_id: value of device_id
+ * @mains_online: boolean value indicating power supply online
+ *
+ * @init_data: charger initialization data structure
+ */
+struct bq2515x_device {
+ struct power_supply *mains;
+ struct power_supply *battery;
+ struct regmap *regmap;
+ struct device *dev;
+
+ struct gpio_desc *reset_gpio;
+ struct gpio_desc *powerdown_gpio;
+ struct gpio_desc *ac_detect_gpio;
+ struct gpio_desc *ce_gpio;
+
+ char model_name[I2C_NAME_SIZE];
+ int device_id;
+ bool mains_online;
+
+ struct bq2515x_init_data init_data;
+};
+
+static const struct reg_default bq25150_reg_defaults[] = {
+ {BQ2515X_FLAG0, 0x0},
+ {BQ2515X_FLAG1, 0x0},
+ {BQ2515X_FLAG2, 0x0},
+ {BQ2515X_FLAG3, 0x0},
+ {BQ2515X_MASK0, 0x0},
+ {BQ2515X_MASK1, 0x0},
+ {BQ2515X_MASK2, 0x71},
+ {BQ2515X_MASK3, 0x0},
+ {BQ2515X_VBAT_CTRL, 0x3C},
+ {BQ2515X_ICHG_CTRL, 0x8},
+ {BQ2515X_PCHRGCTRL, 0x2},
+ {BQ2515X_TERMCTRL, 0x14},
+ {BQ2515X_BUVLO, 0x0},
+ {BQ2515X_CHARGERCTRL0, 0x82},
+ {BQ2515X_CHARGERCTRL1, 0x42},
+ {BQ2515X_ILIMCTRL, 0x1},
+ {BQ2515X_LDOCTRL, 0xB0},
+ {BQ2515X_MRCTRL, 0x2A},
+ {BQ2515X_ICCTRL0, 0x10},
+ {BQ2515X_ICCTRL1, 0x0},
+ {BQ2515X_ICCTRL2, 0x0},
+ {BQ2515X_ADCCTRL0, 0x2},
+ {BQ2515X_ADCCTRL1, 0x40},
+ {BQ2515X_ADC_COMP1_M, 0x23},
+ {BQ2515X_ADC_COMP1_L, 0x20},
+ {BQ2515X_ADC_COMP2_M, 0x38},
+ {BQ2515X_ADC_COMP2_L, 0x90},
+ {BQ2515X_ADC_COMP3_M, 0x0},
+ {BQ2515X_ADC_COMP3_L, 0x0},
+ {BQ2515X_ADC_READ_EN, 0x0},
+ {BQ2515X_TS_FASTCHGCTRL, 0x34},
+ {BQ2515X_TS_COLD, 0x7C},
+ {BQ2515X_TS_COOL, 0x6D},
+ {BQ2515X_TS_WARM, 0x38},
+ {BQ2515X_TS_HOT, 0x27},
+ {BQ2515X_DEVICE_ID, 0x20},
+};
+
+static const struct reg_default bq25155_reg_defaults[] = {
+ {BQ2515X_FLAG0, 0x0},
+ {BQ2515X_FLAG1, 0x0},
+ {BQ2515X_FLAG2, 0x0},
+ {BQ2515X_FLAG3, 0x0},
+ {BQ2515X_MASK0, 0x0},
+ {BQ2515X_MASK1, 0x0},
+ {BQ2515X_MASK2, 0x71},
+ {BQ2515X_MASK3, 0x0},
+ {BQ2515X_VBAT_CTRL, 0x3C},
+ {BQ2515X_ICHG_CTRL, 0x8},
+ {BQ2515X_PCHRGCTRL, 0x2},
+ {BQ2515X_TERMCTRL, 0x14},
+ {BQ2515X_BUVLO, 0x0},
+ {BQ2515X_CHARGERCTRL0, 0x82},
+ {BQ2515X_CHARGERCTRL1, 0xC2},
+ {BQ2515X_ILIMCTRL, 0x6},
+ {BQ2515X_LDOCTRL, 0xB0},
+ {BQ2515X_MRCTRL, 0x2A},
+ {BQ2515X_ICCTRL0, 0x10},
+ {BQ2515X_ICCTRL1, 0x0},
+ {BQ2515X_ICCTRL2, 0x40},
+ {BQ2515X_ADCCTRL0, 0x2},
+ {BQ2515X_ADCCTRL1, 0x40},
+ {BQ2515X_ADC_COMP1_M, 0x23},
+ {BQ2515X_ADC_COMP1_L, 0x20},
+ {BQ2515X_ADC_COMP2_M, 0x38},
+ {BQ2515X_ADC_COMP2_L, 0x90},
+ {BQ2515X_ADC_COMP3_M, 0x0},
+ {BQ2515X_ADC_COMP3_L, 0x0},
+ {BQ2515X_ADC_READ_EN, 0x0},
+ {BQ2515X_TS_FASTCHGCTRL, 0x34},
+ {BQ2515X_TS_COLD, 0x7C},
+ {BQ2515X_TS_COOL, 0x6D},
+ {BQ2515X_TS_WARM, 0x38},
+ {BQ2515X_TS_HOT, 0x27},
+ {BQ2515X_DEVICE_ID, 0x35},
+};
+
+static int bq2515x_wake_up(struct bq2515x_device *bq2515x)
+{
+ int ret;
+ int val;
+
+ /* Read the STAT register if we can read it then the device is out
+ * of ship mode. If the register cannot be read then attempt to wake
+ * it up and enable the ADC.
+ */
+ ret = regmap_read(bq2515x->regmap, BQ2515X_STAT0, &val);
+ if (ret)
+ return ret;
+
+ /* Need to toggle LP and bring device out of ship mode. The device
+ * will exit the ship mode when the MR pin is held low for at least
+ * t_WAKE2 as shown in section 8.3.7.1 of the datasheet.
+ */
+ gpiod_set_value_cansleep(bq2515x->powerdown_gpio, 0);
+
+ gpiod_set_value_cansleep(bq2515x->reset_gpio, 0);
+ usleep_range(BQ2515X_TWAKE2_MIN_US, BQ2515X_TWAKE2_MAX_US);
+ gpiod_set_value_cansleep(bq2515x->reset_gpio, 1);
+
+ return regmap_write(bq2515x->regmap, BQ2515X_ADC_READ_EN,
+ (BQ2515X_EN_VBAT_READ | BQ2515X_EN_ICHG_READ));
+}
+
+static int bq2515x_update_ps_status(struct bq2515x_device *bq2515x)
+{
+ bool dc = false;
+ unsigned int val;
+ int ret;
+
+ if (bq2515x->ac_detect_gpio)
+ val = gpiod_get_value_cansleep(bq2515x->ac_detect_gpio);
+ else {
+ ret = regmap_read(bq2515x->regmap, BQ2515X_STAT0, &val);
+ if (ret)
+ return ret;
+ }
+
+ dc = val & BQ2515X_VIN_GOOD;
+
+ ret = bq2515x->mains_online != dc;
+
+ bq2515x->mains_online = dc;
+
+ return ret;
+}
+
+static int bq2515x_disable_watchdog_timers(struct bq2515x_device *bq2515x)
+{
+ int ret;
+
+ ret = regmap_update_bits(bq2515x->regmap, BQ2515X_CHARGERCTRL0,
+ BQ2515X_WATCHDOG_DISABLE, BQ2515X_WATCHDOG_DISABLE);
+ if (ret)
+ return ret;
+
+ return regmap_update_bits(bq2515x->regmap, BQ2515X_ICCTRL2,
+ BQ2515X_HWRESET_14S_WD, 0);
+}
+
+static int bq2515x_get_battery_voltage_now(struct bq2515x_device *bq2515x)
+{
+ int ret;
+ int vbat_msb;
+ int vbat_lsb;
+ uint32_t vbat_measurement;
+
+ if (!bq2515x->mains_online)
+ bq2515x_wake_up(bq2515x);
+
+ ret = regmap_read(bq2515x->regmap, BQ2515X_ADC_VBAT_M, &vbat_msb);
+ if (ret)
+ return ret;
+
+ ret = regmap_read(bq2515x->regmap, BQ2515X_ADC_VBAT_L, &vbat_lsb);
+ if (ret)
+ return ret;
+
+ vbat_measurement = (vbat_msb << 8) | vbat_lsb;
+
+ return vbat_measurement * (BQ2515X_UV_FACTOR / BQ2515X_DIVISOR) *
+ BQ2515X_VBAT_MULTIPLIER;
+}
+
+static int bq2515x_get_battery_current_now(struct bq2515x_device *bq2515x)
+{
+ int ret;
+ int ichg_msb;
+ int ichg_lsb;
+ uint32_t ichg_measurement;
+ u16 ichg_multiplier = BQ2515X_ICHG_RNG_1B0_UA;
+ unsigned int ichg_reg_code, reg_code;
+ unsigned int icharge_range = 0, pchrgctrl;
+ unsigned int buvlo, vlowv_sel, vlowv = BQ2515X_VLOWV_SEL_1B0_UV;
+
+ if (!bq2515x->mains_online)
+ return -ENODATA;
+
+ ret = regmap_read(bq2515x->regmap, BQ2515X_ADC_ICHG_M, &ichg_msb);
+ if (ret)
+ return ret;
+
+ ret = regmap_read(bq2515x->regmap, BQ2515X_ADC_ICHG_L, &ichg_lsb);
+ if (ret)
+ return ret;
+
+ ichg_measurement = (ichg_msb << 8) | ichg_lsb;
+
+ ret = regmap_read(bq2515x->regmap, BQ2515X_BUVLO, &buvlo);
+ if (ret)
+ return ret;
+
+ vlowv_sel = buvlo & BQ2515X_VLOWV_SEL;
+
+ if (vlowv_sel)
+ vlowv = BQ2515X_VLOWV_SEL_1B1_UV;
+
+ if (bq2515x_get_battery_voltage_now(bq2515x) < vlowv) {
+ ret = regmap_read(bq2515x->regmap, BQ2515X_PCHRGCTRL,
+ &pchrgctrl);
+ if (ret)
+ return ret;
+
+ reg_code = pchrgctrl & BQ2515X_PRECHARGE_MASK;
+ } else {
+ ret = regmap_read(bq2515x->regmap, BQ2515X_ICHG_CTRL,
+ &ichg_reg_code);
+ if (ret)
+ return ret;
+
+ reg_code = ichg_reg_code;
+ }
+
+ ret = regmap_read(bq2515x->regmap, BQ2515X_PCHRGCTRL, &pchrgctrl);
+ if (ret)
+ return ret;
+
+ icharge_range = pchrgctrl & BQ2515X_ICHARGE_RANGE;
+
+ if (icharge_range)
+ ichg_multiplier = BQ2515X_ICHG_RNG_1B1_UA;
+
+ return reg_code * (ichg_multiplier * ichg_measurement /
+ BQ2515X_ICHG_DIVISOR);
+}
+
+static bool bq2515x_get_charge_disable(struct bq2515x_device *bq2515x)
+{
+ int ret;
+ int ce_pin;
+ int icctrl2;
+ int charger_disable;
+
+ ce_pin = gpiod_get_value_cansleep(bq2515x->ce_gpio);
+
+ ret = regmap_read(bq2515x->regmap, BQ2515X_ICCTRL2, &icctrl2);
+ if (ret)
+ return ret;
+
+ charger_disable = icctrl2 & BQ2515X_CHARGER_DISABLE;
+
+ if (charger_disable || ce_pin)
+ return true;
+
+ return false;
+}
+
+static int bq2515x_set_charge_disable(struct bq2515x_device *bq2515x, int val)
+{
+ gpiod_set_value_cansleep(bq2515x->ce_gpio, val);
+
+ return regmap_update_bits(bq2515x->regmap, BQ2515X_ICCTRL2,
+ BQ2515X_CHARGER_DISABLE, val);
+}
+
+static int bq2515x_get_const_charge_current(struct bq2515x_device *bq2515x)
+{
+ int ret;
+ u16 ichg_multiplier = BQ2515X_ICHG_RNG_1B0_UA;
+ unsigned int ichg_reg_code;
+ unsigned int pchrgctrl;
+ unsigned int icharge_range;
+
+ ret = regmap_read(bq2515x->regmap, BQ2515X_ICHG_CTRL, &ichg_reg_code);
+ if (ret)
+ return ret;
+
+ ret = regmap_read(bq2515x->regmap, BQ2515X_PCHRGCTRL, &pchrgctrl);
+ if (ret)
+ return ret;
+
+ icharge_range = pchrgctrl & BQ2515X_ICHARGE_RANGE;
+
+ if (icharge_range)
+ ichg_multiplier = BQ2515X_ICHG_RNG_1B1_UA;
+
+ return ichg_reg_code * ichg_multiplier;
+}
+
+static int bq2515x_set_const_charge_current(struct bq2515x_device *bq2515x,
+ int val)
+{
+ int ret;
+ unsigned int ichg_reg_code;
+ u16 ichg_multiplier = BQ2515X_ICHG_RNG_1B0_UA;
+ unsigned int icharge_range = 0;
+
+ if (val > BQ2515X_ICHG_MAX_UA || val < BQ2515X_ICHG_MIN_UA)
+ return -EINVAL;
+
+ if (val > BQ2515X_ICHG_CURR_STEP_THRESH_UA) {
+ ichg_multiplier = BQ2515X_ICHG_RNG_1B1_UA;
+ icharge_range = BQ2515X_ICHARGE_RANGE;
+ }
+
+ bq2515x_set_charge_disable(bq2515x, 1);
+
+ ret = regmap_update_bits(bq2515x->regmap, BQ2515X_PCHRGCTRL,
+ BQ2515X_ICHARGE_RANGE, icharge_range);
+ if (ret)
+ return ret;
+
+ ichg_reg_code = val / ichg_multiplier;
+
+ ret = regmap_write(bq2515x->regmap, BQ2515X_ICHG_CTRL, ichg_reg_code);
+ if (ret)
+ return ret;
+
+ return bq2515x_set_charge_disable(bq2515x, 0);
+}
+
+static int bq2515x_get_precharge_current(struct bq2515x_device *bq2515x)
+{
+ int ret;
+ unsigned int pchrgctrl;
+ unsigned int icharge_range;
+ u16 precharge_multiplier = BQ2515X_ICHG_RNG_1B0_UA;
+ unsigned int precharge_reg_code;
+
+ ret = regmap_read(bq2515x->regmap, BQ2515X_PCHRGCTRL, &pchrgctrl);
+ if (ret)
+ return ret;
+
+ icharge_range = pchrgctrl & BQ2515X_ICHARGE_RANGE;
+
+ if (icharge_range)
+ precharge_multiplier = BQ2515X_ICHG_RNG_1B1_UA;
+
+ precharge_reg_code = pchrgctrl & BQ2515X_PRECHARGE_MASK;
+
+ return precharge_reg_code * precharge_multiplier;
+}
+
+static int bq2515x_set_precharge_current(struct bq2515x_device *bq2515x,
+ int val)
+{
+ int ret;
+ unsigned int pchrgctrl;
+ unsigned int icharge_range;
+ unsigned int precharge_reg_code;
+ unsigned int precharge_multiplier = BQ2515X_ICHG_RNG_1B0_UA;
+ unsigned int precharge_max_ua = BQ2515X_PRECHRG_ICHRG_RNGE_1875_UA;
+
+ ret = regmap_read(bq2515x->regmap, BQ2515X_PCHRGCTRL, &pchrgctrl);
+ if (ret)
+ return ret;
+
+ icharge_range = pchrgctrl & BQ2515X_ICHARGE_RANGE;
+
+ if (icharge_range) {
+ precharge_max_ua = BQ2515X_PRECHRG_ICHRG_RNGE_3750_UA;
+ precharge_multiplier = BQ2515X_ICHG_RNG_1B1_UA;
+ } else {
+ precharge_max_ua = BQ2515X_PRECHRG_ICHRG_RNGE_1875_UA;
+ precharge_multiplier = BQ2515X_ICHG_RNG_1B0_UA;
+ }
+ if (val > precharge_max_ua || val < BQ2515X_ICHG_MIN_UA)
+ return -EINVAL;
+
+ precharge_reg_code = val / precharge_multiplier;
+
+ ret = bq2515x_set_charge_disable(bq2515x, 1);
+ if (ret)
+ return ret;
+
+ ret = regmap_update_bits(bq2515x->regmap, BQ2515X_PCHRGCTRL,
+ BQ2515X_PRECHARGE_MASK, precharge_reg_code);
+ if (ret)
+ return ret;
+
+ return bq2515x_set_charge_disable(bq2515x, 0);
+}
+
+static int bq2515x_charging_status(struct bq2515x_device *bq2515x,
+ union power_supply_propval *val)
+{
+ bool status0_no_fault;
+ bool status1_no_fault;
+ bool ce_status;
+ bool charge_done;
+ unsigned int status;
+ int ret;
+
+ if (!bq2515x->mains_online) {
+ val->intval = POWER_SUPPLY_STATUS_DISCHARGING;
+ return 0;
+ }
+
+ ret = regmap_read(bq2515x->regmap, BQ2515X_STAT0, &status);
+ if (ret)
+ return ret;
+
+ /*
+ * The code block below is used to determine if any faults from the
+ * STAT0 register are disbaling charging or if the charge has completed
+ * according to the CHARGE_DONE_STAT bit.
+ */
+ if (((status & BQ2515X_STAT0_MASK) == true) &
+ ((status & BQ2515X_CHRG_DONE) == false)) {
+ status0_no_fault = true;
+ charge_done = false;
+ } else if (status & BQ2515X_CHRG_DONE) {
+ charge_done = true;
+ status0_no_fault = false;
+ } else {
+ status0_no_fault = false;
+ charge_done = false;
+ }
+
+ ret = regmap_read(bq2515x->regmap, BQ2515X_STAT1, &status);
+ if (ret)
+ return ret;
+ /*
+ * The code block below is used to determine if any faults from the
+ * STAT1 register are disbaling charging
+ */
+ if ((status & BQ2515X_STAT1_MASK) == false)
+ status1_no_fault = true;
+ else
+ status1_no_fault = false;
+
+ ce_status = (!bq2515x_get_charge_disable(bq2515x));
+
+ /*
+ * If there are no faults and charging is enabled, then status is
+ * charging. Otherwise, if charging is complete, then status is full.
+ * Otherwise, if a fault exists or charging is disabled, then status is
+ * not charging
+ */
+ if (status0_no_fault & status1_no_fault & ce_status)
+ val->intval = POWER_SUPPLY_STATUS_CHARGING;
+ else if (charge_done)
+ val->intval = POWER_SUPPLY_STATUS_FULL;
+ else if (!(status0_no_fault & status1_no_fault & ce_status))
+ val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING;
+
+ return 0;
+}
+
+static int bq2515x_get_batt_reg(struct bq2515x_device *bq2515x)
+{
+ int vbat_reg_code;
+ int ret;
+
+ ret = regmap_read(bq2515x->regmap, BQ2515X_VBAT_CTRL, &vbat_reg_code);
+ if (ret)
+ return ret;
+
+ return BQ2515X_VBAT_BASE_VOLT + vbat_reg_code * BQ2515X_VBAT_STEP_UV;
+}
+
+static int bq2515x_set_batt_reg(struct bq2515x_device *bq2515x, int val)
+{
+ int vbat_reg_code;
+
+ if (val > BQ2515X_VBAT_REG_MAX || val < BQ2515X_VBAT_REG_MIN)
+ return -EINVAL;
+
+ vbat_reg_code = (val - BQ2515X_VBAT_BASE_VOLT) / BQ2515X_VBAT_STEP_UV;
+
+ return regmap_write(bq2515x->regmap, BQ2515X_VBAT_CTRL, vbat_reg_code);
+}
+
+static int bq2515x_get_ilim_lvl(struct bq2515x_device *bq2515x)
+{
+ int ret;
+ int ilimctrl;
+
+ ret = regmap_read(bq2515x->regmap, BQ2515X_ILIMCTRL, &ilimctrl);
+ if (ret)
+ return ret;
+
+ return bq2515x_ilim_lvl_values[ilimctrl & BQ2515X_ILIM_MASK];
+}
+
+static int bq2515x_set_ilim_lvl(struct bq2515x_device *bq2515x, int val)
+{
+ int i = 0;
+ unsigned int array_size = ARRAY_SIZE(bq2515x_ilim_lvl_values);
+
+ for (i = array_size - 1; i > 0; i--) {
+ if (val >= bq2515x_ilim_lvl_values[i])
+ break;
+ }
+ return regmap_write(bq2515x->regmap, BQ2515X_ILIMCTRL, i);
+}
+
+static int bq2515x_power_supply_property_is_writeable(struct power_supply *psy,
+ enum power_supply_property prop)
+{
+ switch (prop) {
+ case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT:
+ case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE:
+ case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT:
+ case POWER_SUPPLY_PROP_PRECHARGE_CURRENT:
+ return true;
+ default:
+ return false;
+ }
+}
+
+static int bq2515x_charger_get_health(struct bq2515x_device *bq2515x,
+ union power_supply_propval *val)
+{
+ int health = POWER_SUPPLY_HEALTH_GOOD;
+ int ret;
+ unsigned int stat1;
+ unsigned int flag3;
+
+ if (!bq2515x->mains_online)
+ bq2515x_wake_up(bq2515x);
+
+ ret = regmap_read(bq2515x->regmap, BQ2515X_FLAG3, &flag3);
+ if (ret)
+ return ret;
+
+ ret = regmap_read(bq2515x->regmap, BQ2515X_STAT1, &stat1);
+ if (ret)
+ return ret;
+
+ if (stat1 & BQ2515X_HEALTH_MASK) {
+ switch (stat1 & BQ2515X_HEALTH_MASK) {
+ case BQ2515X_TS_HOT_STAT:
+ health = POWER_SUPPLY_HEALTH_HOT;
+ break;
+ case BQ2515X_TS_WARM_STAT:
+ health = POWER_SUPPLY_HEALTH_WARM;
+ break;
+ case BQ2515X_TS_COOL_STAT:
+ health = POWER_SUPPLY_HEALTH_COOL;
+ break;
+ case BQ2515X_TS_COLD_STAT:
+ health = POWER_SUPPLY_HEALTH_COLD;
+ break;
+ default:
+ health = POWER_SUPPLY_HEALTH_UNKNOWN;
+ break;
+ }
+ }
+
+ if (stat1 & BQ2515X_VIN_OVP_FAULT_STAT)
+ health = POWER_SUPPLY_HEALTH_OVERVOLTAGE;
+
+ if (flag3 & BQ2515X_SAFETY_TIMER_EXP)
+ health = POWER_SUPPLY_HEALTH_SAFETY_TIMER_EXPIRE;
+
+ val->intval = health;
+ return 0;
+}
+
+static int bq2515x_mains_set_property(struct power_supply *psy,
+ enum power_supply_property prop,
+ const union power_supply_propval *val)
+{
+ struct bq2515x_device *bq2515x = power_supply_get_drvdata(psy);
+ int ret;
+
+ switch (prop) {
+ case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE:
+ ret = bq2515x_set_batt_reg(bq2515x, val->intval);
+ break;
+
+ case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT:
+ ret = bq2515x_set_const_charge_current(bq2515x, val->intval);
+ break;
+
+ case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT:
+ ret = bq2515x_set_ilim_lvl(bq2515x, val->intval);
+ break;
+
+ case POWER_SUPPLY_PROP_PRECHARGE_CURRENT:
+ ret = bq2515x_set_precharge_current(bq2515x, val->intval);
+ break;
+
+ default:
+ return -EINVAL;
+ }
+
+ return ret;
+}
+
+static int bq2515x_mains_get_property(struct power_supply *psy,
+ enum power_supply_property prop,
+ union power_supply_propval *val)
+{
+ struct bq2515x_device *bq2515x = power_supply_get_drvdata(psy);
+ int ret = 0;
+
+ switch (prop) {
+
+ case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT:
+ ret = bq2515x_get_const_charge_current(bq2515x);
+ if (ret < 0)
+ return ret;
+
+ val->intval = ret;
+ break;
+
+ case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE:
+ ret = bq2515x_get_batt_reg(bq2515x);
+ if (ret < 0)
+ return ret;
+ val->intval = ret;
+ break;
+
+ case POWER_SUPPLY_PROP_PRECHARGE_CURRENT:
+ ret = bq2515x_get_precharge_current(bq2515x);
+ if (ret < 0)
+ return ret;
+ val->intval = ret;
+ break;
+
+ case POWER_SUPPLY_PROP_ONLINE:
+ val->intval = bq2515x->mains_online;
+ break;
+
+ case POWER_SUPPLY_PROP_HEALTH:
+ ret = bq2515x_charger_get_health(bq2515x, val);
+ if (ret)
+ val->intval = POWER_SUPPLY_HEALTH_UNKNOWN;
+ break;
+
+ case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT:
+ ret = bq2515x_get_ilim_lvl(bq2515x);
+ if (ret < 0)
+ return ret;
+ val->intval = ret;
+ break;
+
+ case POWER_SUPPLY_PROP_MODEL_NAME:
+ val->strval = bq2515x->model_name;
+ break;
+
+ case POWER_SUPPLY_PROP_MANUFACTURER:
+ val->strval = BQ2515X_MANUFACTURER;
+ break;
+
+ case POWER_SUPPLY_PROP_STATUS:
+ ret = bq2515x_charging_status(bq2515x, val);
+ if (ret)
+ return ret;
+ break;
+
+ default:
+ return -EINVAL;
+ }
+
+ return ret;
+}
+
+static int bq2515x_battery_get_property(struct power_supply *psy,
+ enum power_supply_property prop,
+ union power_supply_propval *val)
+{
+ struct bq2515x_device *bq2515x = power_supply_get_drvdata(psy);
+ int ret;
+
+ ret = bq2515x_update_ps_status(bq2515x);
+ if (ret)
+ return ret;
+
+ switch (prop) {
+
+ case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX:
+ ret = bq2515x->init_data.vbatreg;
+ if (ret < 0)
+ return ret;
+ val->intval = ret;
+ break;
+
+ case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX:
+ ret = bq2515x->init_data.ichg;
+ if (ret < 0)
+ return ret;
+ val->intval = ret;
+ break;
+
+ case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+ ret = bq2515x_get_battery_voltage_now(bq2515x);
+ if (ret < 0)
+ return ret;
+ val->intval = ret;
+ break;
+
+ case POWER_SUPPLY_PROP_CURRENT_NOW:
+ ret = bq2515x_get_battery_current_now(bq2515x);
+ if (ret < 0)
+ return ret;
+ val->intval = ret;
+ break;
+
+ default:
+ return -EINVAL;
+ }
+ return 0;
+}
+
+static const enum power_supply_property bq2515x_battery_properties[] = {
+ POWER_SUPPLY_PROP_VOLTAGE_NOW,
+ POWER_SUPPLY_PROP_CURRENT_NOW,
+ POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX,
+ POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX,
+};
+
+static const enum power_supply_property bq2515x_mains_properties[] = {
+ POWER_SUPPLY_PROP_ONLINE,
+ POWER_SUPPLY_PROP_STATUS,
+ POWER_SUPPLY_PROP_HEALTH,
+ POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT,
+ POWER_SUPPLY_PROP_MODEL_NAME,
+ POWER_SUPPLY_PROP_MANUFACTURER,
+ POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE,
+ POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT,
+ POWER_SUPPLY_PROP_PRECHARGE_CURRENT,
+};
+
+static const struct power_supply_desc bq2515x_mains_desc = {
+ .name = "bq2515x-mains",
+ .type = POWER_SUPPLY_TYPE_MAINS,
+ .get_property = bq2515x_mains_get_property,
+ .set_property = bq2515x_mains_set_property,
+ .properties = bq2515x_mains_properties,
+ .num_properties = ARRAY_SIZE(bq2515x_mains_properties),
+ .property_is_writeable = bq2515x_power_supply_property_is_writeable,
+};
+
+static const struct power_supply_desc bq2515x_battery_desc = {
+ .name = "bq2515x-battery",
+ .type = POWER_SUPPLY_TYPE_BATTERY,
+ .get_property = bq2515x_battery_get_property,
+ .properties = bq2515x_battery_properties,
+ .num_properties = ARRAY_SIZE(bq2515x_battery_properties),
+ .property_is_writeable = bq2515x_power_supply_property_is_writeable,
+};
+
+static int bq2515x_power_supply_register(struct bq2515x_device *bq2515x,
+ struct device *dev, struct power_supply_config psy_cfg)
+{
+ bq2515x->mains = devm_power_supply_register(bq2515x->dev,
+ &bq2515x_mains_desc,
+ &psy_cfg);
+ if (IS_ERR(bq2515x->mains))
+ return -EINVAL;
+
+ bq2515x->battery = devm_power_supply_register(bq2515x->dev,
+ &bq2515x_battery_desc,
+ &psy_cfg);
+ if (IS_ERR(bq2515x->battery))
+ return -EINVAL;
+
+ return 0;
+}
+
+static int bq2515x_hw_init(struct bq2515x_device *bq2515x)
+{
+ int ret;
+ struct power_supply_battery_info bat_info = { };
+
+ ret = bq2515x_disable_watchdog_timers(bq2515x);
+ if (ret)
+ return ret;
+
+ if (bq2515x->init_data.ilim) {
+ ret = bq2515x_set_ilim_lvl(bq2515x, bq2515x->init_data.ilim);
+ if (ret)
+ return ret;
+ }
+
+ ret = power_supply_get_battery_info(bq2515x->mains, &bat_info);
+ if (ret) {
+ dev_warn(bq2515x->dev, "battery info missing, default values will be applied\n");
+
+ bq2515x->init_data.ichg = BQ2515X_DEFAULT_ICHG_UA;
+
+ bq2515x->init_data.vbatreg = BQ2515X_DEFAULT_VBAT_REG_UV;
+
+ bq2515x->init_data.iprechg = BQ2515X_DEFAULT_IPRECHARGE_UA;
+
+ } else {
+ bq2515x->init_data.ichg =
+ bat_info.constant_charge_current_max_ua;
+
+ bq2515x->init_data.vbatreg =
+ bat_info.constant_charge_voltage_max_uv;
+
+ bq2515x->init_data.iprechg =
+ bat_info.precharge_current_ua;
+ }
+
+ ret = bq2515x_set_const_charge_current(bq2515x,
+ bq2515x->init_data.ichg);
+ if (ret)
+ return ret;
+
+ ret = bq2515x_set_batt_reg(bq2515x, bq2515x->init_data.vbatreg);
+ if (ret)
+ return ret;
+
+ return bq2515x_set_precharge_current(bq2515x,
+ bq2515x->init_data.iprechg);
+}
+
+static int bq2515x_read_properties(struct bq2515x_device *bq2515x)
+{
+ int ret;
+
+ ret = device_property_read_u32(bq2515x->dev,
+ "input-current-limit-microamp",
+ &bq2515x->init_data.ilim);
+ if (ret) {
+ switch (bq2515x->device_id) {
+ case BQ25150:
+ bq2515x->init_data.ilim = BQ25150_DEFAULT_ILIM_UA;
+ break;
+ case BQ25155:
+ bq2515x->init_data.ilim = BQ25155_DEFAULT_ILIM_UA;
+ break;
+ }
+ }
+
+ bq2515x->ac_detect_gpio = devm_gpiod_get_optional(bq2515x->dev,
+ "ac-detect", GPIOD_IN);
+ if (IS_ERR(bq2515x->ac_detect_gpio)) {
+ ret = PTR_ERR(bq2515x->ac_detect_gpio);
+ dev_err(bq2515x->dev, "Failed to get ac detect");
+ return ret;
+ }
+
+ bq2515x->reset_gpio = devm_gpiod_get_optional(bq2515x->dev,
+ "reset", GPIOD_OUT_LOW);
+ if (IS_ERR(bq2515x->reset_gpio)) {
+ ret = PTR_ERR(bq2515x->reset_gpio);
+ dev_err(bq2515x->dev, "Failed to get reset");
+ return ret;
+ }
+
+ bq2515x->powerdown_gpio = devm_gpiod_get_optional(bq2515x->dev,
+ "powerdown", GPIOD_OUT_LOW);
+ if (IS_ERR(bq2515x->powerdown_gpio)) {
+ ret = PTR_ERR(bq2515x->powerdown_gpio);
+ dev_err(bq2515x->dev, "Failed to get powerdown");
+ return ret;
+ }
+
+ bq2515x->ce_gpio = devm_gpiod_get_optional(bq2515x->dev,
+ "charge-enable",
+ GPIOD_OUT_LOW);
+ if (IS_ERR(bq2515x->ce_gpio)) {
+ ret = PTR_ERR(bq2515x->ce_gpio);
+ dev_err(bq2515x->dev, "Failed to get ce");
+ return ret;
+ }
+
+ return 0;
+}
+
+static bool bq2515x_volatile_register(struct device *dev, unsigned int reg)
+{
+ switch (reg) {
+ case BQ2515X_STAT0 ... BQ2515X_FLAG3:
+ case BQ2515X_ADC_VBAT_M ... BQ2515X_ADC_IIN_L:
+ return true;
+ default:
+ return false;
+ }
+}
+
+static const struct regmap_config bq25150_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+
+ .max_register = BQ2515X_DEVICE_ID,
+ .reg_defaults = bq25150_reg_defaults,
+ .num_reg_defaults = ARRAY_SIZE(bq25150_reg_defaults),
+ .cache_type = REGCACHE_RBTREE,
+ .volatile_reg = bq2515x_volatile_register,
+};
+
+static const struct regmap_config bq25155_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+
+ .max_register = BQ2515X_DEVICE_ID,
+ .reg_defaults = bq25155_reg_defaults,
+ .num_reg_defaults = ARRAY_SIZE(bq25155_reg_defaults),
+ .cache_type = REGCACHE_RBTREE,
+ .volatile_reg = bq2515x_volatile_register,
+};
+
+static int bq2515x_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct device *dev = &client->dev;
+ struct bq2515x_device *bq2515x;
+ struct power_supply_config charger_cfg = {};
+ int ret;
+
+ bq2515x = devm_kzalloc(dev, sizeof(*bq2515x), GFP_KERNEL);
+ if (!bq2515x)
+ return -ENOMEM;
+
+ bq2515x->dev = dev;
+
+ strncpy(bq2515x->model_name, id->name, I2C_NAME_SIZE);
+
+ bq2515x->device_id = id->driver_data;
+
+ switch (bq2515x->device_id) {
+ case BQ25150:
+ bq2515x->regmap = devm_regmap_init_i2c(client,
+ &bq25150_regmap_config);
+ break;
+ case BQ25155:
+ bq2515x->regmap = devm_regmap_init_i2c(client,
+ &bq25155_regmap_config);
+ break;
+ }
+
+ if (IS_ERR(bq2515x->regmap)) {
+ dev_err(dev, "failed to allocate register map\n");
+ return PTR_ERR(bq2515x->regmap);
+ }
+
+ i2c_set_clientdata(client, bq2515x);
+
+ charger_cfg.drv_data = bq2515x;
+ charger_cfg.of_node = dev->of_node;
+
+ ret = bq2515x_read_properties(bq2515x);
+ if (ret) {
+ dev_err(dev, "Failed to read device tree properties %d\n",
+ ret);
+ return ret;
+ }
+
+ ret = bq2515x_power_supply_register(bq2515x, dev, charger_cfg);
+ if (ret) {
+ dev_err(dev, "failed to register power supply\n");
+ return ret;
+ }
+
+ ret = bq2515x_hw_init(bq2515x);
+ if (ret) {
+ dev_err(dev, "Cannot initialize the chip\n");
+ return ret;
+ }
+
+ return 0;
+}
+
+static const struct i2c_device_id bq2515x_i2c_ids[] = {
+ { "bq25150", BQ25150, },
+ { "bq25155", BQ25155, },
+ {},
+};
+MODULE_DEVICE_TABLE(i2c, bq2515x_i2c_ids);
+
+static const struct of_device_id bq2515x_of_match[] = {
+ { .compatible = "ti,bq25150", },
+ { .compatible = "ti,bq25155", },
+ { },
+};
+MODULE_DEVICE_TABLE(of, bq2515x_of_match);
+
+static struct i2c_driver bq2515x_driver = {
+ .driver = {
+ .name = "bq2515x-charger",
+ .of_match_table = bq2515x_of_match,
+ },
+ .probe = bq2515x_probe,
+ .id_table = bq2515x_i2c_ids,
+};
+module_i2c_driver(bq2515x_driver);
+
+MODULE_AUTHOR("Dan Murphy <dmurphy@ti.com>");
+MODULE_AUTHOR("Ricardo Rivera-Matos <r-rivera-matos@ti.com>");
+MODULE_DESCRIPTION("BQ2515X charger driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/power/supply/bq25890_charger.c b/drivers/power/supply/bq25890_charger.c
new file mode 100644
index 000000000..fe814805c
--- /dev/null
+++ b/drivers/power/supply/bq25890_charger.c
@@ -0,0 +1,1110 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * TI BQ25890 charger driver
+ *
+ * Copyright (C) 2015 Intel Corporation
+ */
+
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/power_supply.h>
+#include <linux/regmap.h>
+#include <linux/types.h>
+#include <linux/gpio/consumer.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/usb/phy.h>
+
+#include <linux/acpi.h>
+#include <linux/of.h>
+
+#define BQ25890_MANUFACTURER "Texas Instruments"
+#define BQ25890_IRQ_PIN "bq25890_irq"
+
+#define BQ25890_ID 3
+#define BQ25895_ID 7
+#define BQ25896_ID 0
+
+enum bq25890_chip_version {
+ BQ25890,
+ BQ25892,
+ BQ25895,
+ BQ25896,
+};
+
+static const char *const bq25890_chip_name[] = {
+ "BQ25890",
+ "BQ25892",
+ "BQ25895",
+ "BQ25896",
+};
+
+enum bq25890_fields {
+ F_EN_HIZ, F_EN_ILIM, F_IILIM, /* Reg00 */
+ F_BHOT, F_BCOLD, F_VINDPM_OFS, /* Reg01 */
+ F_CONV_START, F_CONV_RATE, F_BOOSTF, F_ICO_EN,
+ F_HVDCP_EN, F_MAXC_EN, F_FORCE_DPM, F_AUTO_DPDM_EN, /* Reg02 */
+ F_BAT_LOAD_EN, F_WD_RST, F_OTG_CFG, F_CHG_CFG, F_SYSVMIN,
+ F_MIN_VBAT_SEL, /* Reg03 */
+ F_PUMPX_EN, F_ICHG, /* Reg04 */
+ F_IPRECHG, F_ITERM, /* Reg05 */
+ F_VREG, F_BATLOWV, F_VRECHG, /* Reg06 */
+ F_TERM_EN, F_STAT_DIS, F_WD, F_TMR_EN, F_CHG_TMR,
+ F_JEITA_ISET, /* Reg07 */
+ F_BATCMP, F_VCLAMP, F_TREG, /* Reg08 */
+ F_FORCE_ICO, F_TMR2X_EN, F_BATFET_DIS, F_JEITA_VSET,
+ F_BATFET_DLY, F_BATFET_RST_EN, F_PUMPX_UP, F_PUMPX_DN, /* Reg09 */
+ F_BOOSTV, F_PFM_OTG_DIS, F_BOOSTI, /* Reg0A */
+ F_VBUS_STAT, F_CHG_STAT, F_PG_STAT, F_SDP_STAT, F_0B_RSVD,
+ F_VSYS_STAT, /* Reg0B */
+ F_WD_FAULT, F_BOOST_FAULT, F_CHG_FAULT, F_BAT_FAULT,
+ F_NTC_FAULT, /* Reg0C */
+ F_FORCE_VINDPM, F_VINDPM, /* Reg0D */
+ F_THERM_STAT, F_BATV, /* Reg0E */
+ F_SYSV, /* Reg0F */
+ F_TSPCT, /* Reg10 */
+ F_VBUS_GD, F_VBUSV, /* Reg11 */
+ F_ICHGR, /* Reg12 */
+ F_VDPM_STAT, F_IDPM_STAT, F_IDPM_LIM, /* Reg13 */
+ F_REG_RST, F_ICO_OPTIMIZED, F_PN, F_TS_PROFILE, F_DEV_REV, /* Reg14 */
+
+ F_MAX_FIELDS
+};
+
+/* initial field values, converted to register values */
+struct bq25890_init_data {
+ u8 ichg; /* charge current */
+ u8 vreg; /* regulation voltage */
+ u8 iterm; /* termination current */
+ u8 iprechg; /* precharge current */
+ u8 sysvmin; /* minimum system voltage limit */
+ u8 boostv; /* boost regulation voltage */
+ u8 boosti; /* boost current limit */
+ u8 boostf; /* boost frequency */
+ u8 ilim_en; /* enable ILIM pin */
+ u8 treg; /* thermal regulation threshold */
+ u8 rbatcomp; /* IBAT sense resistor value */
+ u8 vclamp; /* IBAT compensation voltage limit */
+};
+
+struct bq25890_state {
+ u8 online;
+ u8 chrg_status;
+ u8 chrg_fault;
+ u8 vsys_status;
+ u8 boost_fault;
+ u8 bat_fault;
+};
+
+struct bq25890_device {
+ struct i2c_client *client;
+ struct device *dev;
+ struct power_supply *charger;
+
+ struct usb_phy *usb_phy;
+ struct notifier_block usb_nb;
+ struct work_struct usb_work;
+ unsigned long usb_event;
+
+ struct regmap *rmap;
+ struct regmap_field *rmap_fields[F_MAX_FIELDS];
+
+ enum bq25890_chip_version chip_version;
+ struct bq25890_init_data init_data;
+ struct bq25890_state state;
+
+ struct mutex lock; /* protect state data */
+};
+
+static const struct regmap_range bq25890_readonly_reg_ranges[] = {
+ regmap_reg_range(0x0b, 0x0c),
+ regmap_reg_range(0x0e, 0x13),
+};
+
+static const struct regmap_access_table bq25890_writeable_regs = {
+ .no_ranges = bq25890_readonly_reg_ranges,
+ .n_no_ranges = ARRAY_SIZE(bq25890_readonly_reg_ranges),
+};
+
+static const struct regmap_range bq25890_volatile_reg_ranges[] = {
+ regmap_reg_range(0x00, 0x00),
+ regmap_reg_range(0x02, 0x02),
+ regmap_reg_range(0x09, 0x09),
+ regmap_reg_range(0x0b, 0x14),
+};
+
+static const struct regmap_access_table bq25890_volatile_regs = {
+ .yes_ranges = bq25890_volatile_reg_ranges,
+ .n_yes_ranges = ARRAY_SIZE(bq25890_volatile_reg_ranges),
+};
+
+static const struct regmap_config bq25890_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+
+ .max_register = 0x14,
+ .cache_type = REGCACHE_RBTREE,
+
+ .wr_table = &bq25890_writeable_regs,
+ .volatile_table = &bq25890_volatile_regs,
+};
+
+static const struct reg_field bq25890_reg_fields[] = {
+ /* REG00 */
+ [F_EN_HIZ] = REG_FIELD(0x00, 7, 7),
+ [F_EN_ILIM] = REG_FIELD(0x00, 6, 6),
+ [F_IILIM] = REG_FIELD(0x00, 0, 5),
+ /* REG01 */
+ [F_BHOT] = REG_FIELD(0x01, 6, 7),
+ [F_BCOLD] = REG_FIELD(0x01, 5, 5),
+ [F_VINDPM_OFS] = REG_FIELD(0x01, 0, 4),
+ /* REG02 */
+ [F_CONV_START] = REG_FIELD(0x02, 7, 7),
+ [F_CONV_RATE] = REG_FIELD(0x02, 6, 6),
+ [F_BOOSTF] = REG_FIELD(0x02, 5, 5),
+ [F_ICO_EN] = REG_FIELD(0x02, 4, 4),
+ [F_HVDCP_EN] = REG_FIELD(0x02, 3, 3), // reserved on BQ25896
+ [F_MAXC_EN] = REG_FIELD(0x02, 2, 2), // reserved on BQ25896
+ [F_FORCE_DPM] = REG_FIELD(0x02, 1, 1),
+ [F_AUTO_DPDM_EN] = REG_FIELD(0x02, 0, 0),
+ /* REG03 */
+ [F_BAT_LOAD_EN] = REG_FIELD(0x03, 7, 7),
+ [F_WD_RST] = REG_FIELD(0x03, 6, 6),
+ [F_OTG_CFG] = REG_FIELD(0x03, 5, 5),
+ [F_CHG_CFG] = REG_FIELD(0x03, 4, 4),
+ [F_SYSVMIN] = REG_FIELD(0x03, 1, 3),
+ [F_MIN_VBAT_SEL] = REG_FIELD(0x03, 0, 0), // BQ25896 only
+ /* REG04 */
+ [F_PUMPX_EN] = REG_FIELD(0x04, 7, 7),
+ [F_ICHG] = REG_FIELD(0x04, 0, 6),
+ /* REG05 */
+ [F_IPRECHG] = REG_FIELD(0x05, 4, 7),
+ [F_ITERM] = REG_FIELD(0x05, 0, 3),
+ /* REG06 */
+ [F_VREG] = REG_FIELD(0x06, 2, 7),
+ [F_BATLOWV] = REG_FIELD(0x06, 1, 1),
+ [F_VRECHG] = REG_FIELD(0x06, 0, 0),
+ /* REG07 */
+ [F_TERM_EN] = REG_FIELD(0x07, 7, 7),
+ [F_STAT_DIS] = REG_FIELD(0x07, 6, 6),
+ [F_WD] = REG_FIELD(0x07, 4, 5),
+ [F_TMR_EN] = REG_FIELD(0x07, 3, 3),
+ [F_CHG_TMR] = REG_FIELD(0x07, 1, 2),
+ [F_JEITA_ISET] = REG_FIELD(0x07, 0, 0), // reserved on BQ25895
+ /* REG08 */
+ [F_BATCMP] = REG_FIELD(0x08, 5, 7),
+ [F_VCLAMP] = REG_FIELD(0x08, 2, 4),
+ [F_TREG] = REG_FIELD(0x08, 0, 1),
+ /* REG09 */
+ [F_FORCE_ICO] = REG_FIELD(0x09, 7, 7),
+ [F_TMR2X_EN] = REG_FIELD(0x09, 6, 6),
+ [F_BATFET_DIS] = REG_FIELD(0x09, 5, 5),
+ [F_JEITA_VSET] = REG_FIELD(0x09, 4, 4), // reserved on BQ25895
+ [F_BATFET_DLY] = REG_FIELD(0x09, 3, 3),
+ [F_BATFET_RST_EN] = REG_FIELD(0x09, 2, 2),
+ [F_PUMPX_UP] = REG_FIELD(0x09, 1, 1),
+ [F_PUMPX_DN] = REG_FIELD(0x09, 0, 0),
+ /* REG0A */
+ [F_BOOSTV] = REG_FIELD(0x0A, 4, 7),
+ [F_BOOSTI] = REG_FIELD(0x0A, 0, 2), // reserved on BQ25895
+ [F_PFM_OTG_DIS] = REG_FIELD(0x0A, 3, 3), // BQ25896 only
+ /* REG0B */
+ [F_VBUS_STAT] = REG_FIELD(0x0B, 5, 7),
+ [F_CHG_STAT] = REG_FIELD(0x0B, 3, 4),
+ [F_PG_STAT] = REG_FIELD(0x0B, 2, 2),
+ [F_SDP_STAT] = REG_FIELD(0x0B, 1, 1), // reserved on BQ25896
+ [F_VSYS_STAT] = REG_FIELD(0x0B, 0, 0),
+ /* REG0C */
+ [F_WD_FAULT] = REG_FIELD(0x0C, 7, 7),
+ [F_BOOST_FAULT] = REG_FIELD(0x0C, 6, 6),
+ [F_CHG_FAULT] = REG_FIELD(0x0C, 4, 5),
+ [F_BAT_FAULT] = REG_FIELD(0x0C, 3, 3),
+ [F_NTC_FAULT] = REG_FIELD(0x0C, 0, 2),
+ /* REG0D */
+ [F_FORCE_VINDPM] = REG_FIELD(0x0D, 7, 7),
+ [F_VINDPM] = REG_FIELD(0x0D, 0, 6),
+ /* REG0E */
+ [F_THERM_STAT] = REG_FIELD(0x0E, 7, 7),
+ [F_BATV] = REG_FIELD(0x0E, 0, 6),
+ /* REG0F */
+ [F_SYSV] = REG_FIELD(0x0F, 0, 6),
+ /* REG10 */
+ [F_TSPCT] = REG_FIELD(0x10, 0, 6),
+ /* REG11 */
+ [F_VBUS_GD] = REG_FIELD(0x11, 7, 7),
+ [F_VBUSV] = REG_FIELD(0x11, 0, 6),
+ /* REG12 */
+ [F_ICHGR] = REG_FIELD(0x12, 0, 6),
+ /* REG13 */
+ [F_VDPM_STAT] = REG_FIELD(0x13, 7, 7),
+ [F_IDPM_STAT] = REG_FIELD(0x13, 6, 6),
+ [F_IDPM_LIM] = REG_FIELD(0x13, 0, 5),
+ /* REG14 */
+ [F_REG_RST] = REG_FIELD(0x14, 7, 7),
+ [F_ICO_OPTIMIZED] = REG_FIELD(0x14, 6, 6),
+ [F_PN] = REG_FIELD(0x14, 3, 5),
+ [F_TS_PROFILE] = REG_FIELD(0x14, 2, 2),
+ [F_DEV_REV] = REG_FIELD(0x14, 0, 1)
+};
+
+/*
+ * Most of the val -> idx conversions can be computed, given the minimum,
+ * maximum and the step between values. For the rest of conversions, we use
+ * lookup tables.
+ */
+enum bq25890_table_ids {
+ /* range tables */
+ TBL_ICHG,
+ TBL_ITERM,
+ TBL_IILIM,
+ TBL_VREG,
+ TBL_BOOSTV,
+ TBL_SYSVMIN,
+ TBL_VBATCOMP,
+ TBL_RBATCOMP,
+
+ /* lookup tables */
+ TBL_TREG,
+ TBL_BOOSTI,
+};
+
+/* Thermal Regulation Threshold lookup table, in degrees Celsius */
+static const u32 bq25890_treg_tbl[] = { 60, 80, 100, 120 };
+
+#define BQ25890_TREG_TBL_SIZE ARRAY_SIZE(bq25890_treg_tbl)
+
+/* Boost mode current limit lookup table, in uA */
+static const u32 bq25890_boosti_tbl[] = {
+ 500000, 700000, 1100000, 1300000, 1600000, 1800000, 2100000, 2400000
+};
+
+#define BQ25890_BOOSTI_TBL_SIZE ARRAY_SIZE(bq25890_boosti_tbl)
+
+struct bq25890_range {
+ u32 min;
+ u32 max;
+ u32 step;
+};
+
+struct bq25890_lookup {
+ const u32 *tbl;
+ u32 size;
+};
+
+static const union {
+ struct bq25890_range rt;
+ struct bq25890_lookup lt;
+} bq25890_tables[] = {
+ /* range tables */
+ /* TODO: BQ25896 has max ICHG 3008 mA */
+ [TBL_ICHG] = { .rt = {0, 5056000, 64000} }, /* uA */
+ [TBL_ITERM] = { .rt = {64000, 1024000, 64000} }, /* uA */
+ [TBL_IILIM] = { .rt = {100000, 3250000, 50000} }, /* uA */
+ [TBL_VREG] = { .rt = {3840000, 4608000, 16000} }, /* uV */
+ [TBL_BOOSTV] = { .rt = {4550000, 5510000, 64000} }, /* uV */
+ [TBL_SYSVMIN] = { .rt = {3000000, 3700000, 100000} }, /* uV */
+ [TBL_VBATCOMP] ={ .rt = {0, 224000, 32000} }, /* uV */
+ [TBL_RBATCOMP] ={ .rt = {0, 140000, 20000} }, /* uOhm */
+
+ /* lookup tables */
+ [TBL_TREG] = { .lt = {bq25890_treg_tbl, BQ25890_TREG_TBL_SIZE} },
+ [TBL_BOOSTI] = { .lt = {bq25890_boosti_tbl, BQ25890_BOOSTI_TBL_SIZE} }
+};
+
+static int bq25890_field_read(struct bq25890_device *bq,
+ enum bq25890_fields field_id)
+{
+ int ret;
+ int val;
+
+ ret = regmap_field_read(bq->rmap_fields[field_id], &val);
+ if (ret < 0)
+ return ret;
+
+ return val;
+}
+
+static int bq25890_field_write(struct bq25890_device *bq,
+ enum bq25890_fields field_id, u8 val)
+{
+ return regmap_field_write(bq->rmap_fields[field_id], val);
+}
+
+static u8 bq25890_find_idx(u32 value, enum bq25890_table_ids id)
+{
+ u8 idx;
+
+ if (id >= TBL_TREG) {
+ const u32 *tbl = bq25890_tables[id].lt.tbl;
+ u32 tbl_size = bq25890_tables[id].lt.size;
+
+ for (idx = 1; idx < tbl_size && tbl[idx] <= value; idx++)
+ ;
+ } else {
+ const struct bq25890_range *rtbl = &bq25890_tables[id].rt;
+ u8 rtbl_size;
+
+ rtbl_size = (rtbl->max - rtbl->min) / rtbl->step + 1;
+
+ for (idx = 1;
+ idx < rtbl_size && (idx * rtbl->step + rtbl->min <= value);
+ idx++)
+ ;
+ }
+
+ return idx - 1;
+}
+
+static u32 bq25890_find_val(u8 idx, enum bq25890_table_ids id)
+{
+ const struct bq25890_range *rtbl;
+
+ /* lookup table? */
+ if (id >= TBL_TREG)
+ return bq25890_tables[id].lt.tbl[idx];
+
+ /* range table */
+ rtbl = &bq25890_tables[id].rt;
+
+ return (rtbl->min + idx * rtbl->step);
+}
+
+enum bq25890_status {
+ STATUS_NOT_CHARGING,
+ STATUS_PRE_CHARGING,
+ STATUS_FAST_CHARGING,
+ STATUS_TERMINATION_DONE,
+};
+
+enum bq25890_chrg_fault {
+ CHRG_FAULT_NORMAL,
+ CHRG_FAULT_INPUT,
+ CHRG_FAULT_THERMAL_SHUTDOWN,
+ CHRG_FAULT_TIMER_EXPIRED,
+};
+
+static bool bq25890_is_adc_property(enum power_supply_property psp)
+{
+ switch (psp) {
+ case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+ case POWER_SUPPLY_PROP_CURRENT_NOW:
+ return true;
+
+ default:
+ return false;
+ }
+}
+
+static irqreturn_t __bq25890_handle_irq(struct bq25890_device *bq);
+
+static int bq25890_power_supply_get_property(struct power_supply *psy,
+ enum power_supply_property psp,
+ union power_supply_propval *val)
+{
+ struct bq25890_device *bq = power_supply_get_drvdata(psy);
+ struct bq25890_state state;
+ bool do_adc_conv;
+ int ret;
+
+ mutex_lock(&bq->lock);
+ /* update state in case we lost an interrupt */
+ __bq25890_handle_irq(bq);
+ state = bq->state;
+ do_adc_conv = !state.online && bq25890_is_adc_property(psp);
+ if (do_adc_conv)
+ bq25890_field_write(bq, F_CONV_START, 1);
+ mutex_unlock(&bq->lock);
+
+ if (do_adc_conv)
+ regmap_field_read_poll_timeout(bq->rmap_fields[F_CONV_START],
+ ret, !ret, 25000, 1000000);
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_STATUS:
+ if (!state.online)
+ val->intval = POWER_SUPPLY_STATUS_DISCHARGING;
+ else if (state.chrg_status == STATUS_NOT_CHARGING)
+ val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING;
+ else if (state.chrg_status == STATUS_PRE_CHARGING ||
+ state.chrg_status == STATUS_FAST_CHARGING)
+ val->intval = POWER_SUPPLY_STATUS_CHARGING;
+ else if (state.chrg_status == STATUS_TERMINATION_DONE)
+ val->intval = POWER_SUPPLY_STATUS_FULL;
+ else
+ val->intval = POWER_SUPPLY_STATUS_UNKNOWN;
+
+ break;
+
+ case POWER_SUPPLY_PROP_CHARGE_TYPE:
+ if (!state.online || state.chrg_status == STATUS_NOT_CHARGING ||
+ state.chrg_status == STATUS_TERMINATION_DONE)
+ val->intval = POWER_SUPPLY_CHARGE_TYPE_NONE;
+ else if (state.chrg_status == STATUS_PRE_CHARGING)
+ val->intval = POWER_SUPPLY_CHARGE_TYPE_STANDARD;
+ else if (state.chrg_status == STATUS_FAST_CHARGING)
+ val->intval = POWER_SUPPLY_CHARGE_TYPE_FAST;
+ else /* unreachable */
+ val->intval = POWER_SUPPLY_CHARGE_TYPE_UNKNOWN;
+ break;
+
+ case POWER_SUPPLY_PROP_MANUFACTURER:
+ val->strval = BQ25890_MANUFACTURER;
+ break;
+
+ case POWER_SUPPLY_PROP_MODEL_NAME:
+ val->strval = bq25890_chip_name[bq->chip_version];
+ break;
+
+ case POWER_SUPPLY_PROP_ONLINE:
+ val->intval = state.online;
+ break;
+
+ case POWER_SUPPLY_PROP_HEALTH:
+ if (!state.chrg_fault && !state.bat_fault && !state.boost_fault)
+ val->intval = POWER_SUPPLY_HEALTH_GOOD;
+ else if (state.bat_fault)
+ val->intval = POWER_SUPPLY_HEALTH_OVERVOLTAGE;
+ else if (state.chrg_fault == CHRG_FAULT_TIMER_EXPIRED)
+ val->intval = POWER_SUPPLY_HEALTH_SAFETY_TIMER_EXPIRE;
+ else if (state.chrg_fault == CHRG_FAULT_THERMAL_SHUTDOWN)
+ val->intval = POWER_SUPPLY_HEALTH_OVERHEAT;
+ else
+ val->intval = POWER_SUPPLY_HEALTH_UNSPEC_FAILURE;
+ break;
+
+ case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX:
+ val->intval = bq25890_find_val(bq->init_data.ichg, TBL_ICHG);
+ break;
+
+ case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE:
+ if (!state.online) {
+ val->intval = 0;
+ break;
+ }
+
+ ret = bq25890_field_read(bq, F_BATV); /* read measured value */
+ if (ret < 0)
+ return ret;
+
+ /* converted_val = 2.304V + ADC_val * 20mV (table 10.3.15) */
+ val->intval = 2304000 + ret * 20000;
+ break;
+
+ case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX:
+ val->intval = bq25890_find_val(bq->init_data.vreg, TBL_VREG);
+ break;
+
+ case POWER_SUPPLY_PROP_PRECHARGE_CURRENT:
+ val->intval = bq25890_find_val(bq->init_data.iprechg, TBL_ITERM);
+ break;
+
+ case POWER_SUPPLY_PROP_CHARGE_TERM_CURRENT:
+ val->intval = bq25890_find_val(bq->init_data.iterm, TBL_ITERM);
+ break;
+
+ case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT:
+ ret = bq25890_field_read(bq, F_IILIM);
+ if (ret < 0)
+ return ret;
+
+ val->intval = bq25890_find_val(ret, TBL_IILIM);
+ break;
+
+ case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+ ret = bq25890_field_read(bq, F_SYSV); /* read measured value */
+ if (ret < 0)
+ return ret;
+
+ /* converted_val = 2.304V + ADC_val * 20mV (table 10.3.15) */
+ val->intval = 2304000 + ret * 20000;
+ break;
+
+ case POWER_SUPPLY_PROP_CURRENT_NOW:
+ ret = bq25890_field_read(bq, F_ICHGR); /* read measured value */
+ if (ret < 0)
+ return ret;
+
+ /* converted_val = ADC_val * 50mA (table 10.3.19) */
+ val->intval = ret * -50000;
+ break;
+
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int bq25890_get_chip_state(struct bq25890_device *bq,
+ struct bq25890_state *state)
+{
+ int i, ret;
+
+ struct {
+ enum bq25890_fields id;
+ u8 *data;
+ } state_fields[] = {
+ {F_CHG_STAT, &state->chrg_status},
+ {F_PG_STAT, &state->online},
+ {F_VSYS_STAT, &state->vsys_status},
+ {F_BOOST_FAULT, &state->boost_fault},
+ {F_BAT_FAULT, &state->bat_fault},
+ {F_CHG_FAULT, &state->chrg_fault}
+ };
+
+ for (i = 0; i < ARRAY_SIZE(state_fields); i++) {
+ ret = bq25890_field_read(bq, state_fields[i].id);
+ if (ret < 0)
+ return ret;
+
+ *state_fields[i].data = ret;
+ }
+
+ dev_dbg(bq->dev, "S:CHG/PG/VSYS=%d/%d/%d, F:CHG/BOOST/BAT=%d/%d/%d\n",
+ state->chrg_status, state->online, state->vsys_status,
+ state->chrg_fault, state->boost_fault, state->bat_fault);
+
+ return 0;
+}
+
+static irqreturn_t __bq25890_handle_irq(struct bq25890_device *bq)
+{
+ struct bq25890_state new_state;
+ int ret;
+
+ ret = bq25890_get_chip_state(bq, &new_state);
+ if (ret < 0)
+ return IRQ_NONE;
+
+ if (!memcmp(&bq->state, &new_state, sizeof(new_state)))
+ return IRQ_NONE;
+
+ if (!new_state.online && bq->state.online) { /* power removed */
+ /* disable ADC */
+ ret = bq25890_field_write(bq, F_CONV_RATE, 0);
+ if (ret < 0)
+ goto error;
+ } else if (new_state.online && !bq->state.online) { /* power inserted */
+ /* enable ADC, to have control of charge current/voltage */
+ ret = bq25890_field_write(bq, F_CONV_RATE, 1);
+ if (ret < 0)
+ goto error;
+ }
+
+ bq->state = new_state;
+ power_supply_changed(bq->charger);
+
+ return IRQ_HANDLED;
+error:
+ dev_err(bq->dev, "Error communicating with the chip: %pe\n",
+ ERR_PTR(ret));
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t bq25890_irq_handler_thread(int irq, void *private)
+{
+ struct bq25890_device *bq = private;
+ irqreturn_t ret;
+
+ mutex_lock(&bq->lock);
+ ret = __bq25890_handle_irq(bq);
+ mutex_unlock(&bq->lock);
+
+ return ret;
+}
+
+static int bq25890_chip_reset(struct bq25890_device *bq)
+{
+ int ret;
+ int rst_check_counter = 10;
+
+ ret = bq25890_field_write(bq, F_REG_RST, 1);
+ if (ret < 0)
+ return ret;
+
+ do {
+ ret = bq25890_field_read(bq, F_REG_RST);
+ if (ret < 0)
+ return ret;
+
+ usleep_range(5, 10);
+ } while (ret == 1 && --rst_check_counter);
+
+ if (!rst_check_counter)
+ return -ETIMEDOUT;
+
+ return 0;
+}
+
+static int bq25890_hw_init(struct bq25890_device *bq)
+{
+ int ret;
+ int i;
+
+ const struct {
+ enum bq25890_fields id;
+ u32 value;
+ } init_data[] = {
+ {F_ICHG, bq->init_data.ichg},
+ {F_VREG, bq->init_data.vreg},
+ {F_ITERM, bq->init_data.iterm},
+ {F_IPRECHG, bq->init_data.iprechg},
+ {F_SYSVMIN, bq->init_data.sysvmin},
+ {F_BOOSTV, bq->init_data.boostv},
+ {F_BOOSTI, bq->init_data.boosti},
+ {F_BOOSTF, bq->init_data.boostf},
+ {F_EN_ILIM, bq->init_data.ilim_en},
+ {F_TREG, bq->init_data.treg},
+ {F_BATCMP, bq->init_data.rbatcomp},
+ {F_VCLAMP, bq->init_data.vclamp},
+ };
+
+ ret = bq25890_chip_reset(bq);
+ if (ret < 0) {
+ dev_dbg(bq->dev, "Reset failed %d\n", ret);
+ return ret;
+ }
+
+ /* disable watchdog */
+ ret = bq25890_field_write(bq, F_WD, 0);
+ if (ret < 0) {
+ dev_dbg(bq->dev, "Disabling watchdog failed %d\n", ret);
+ return ret;
+ }
+
+ /* initialize currents/voltages and other parameters */
+ for (i = 0; i < ARRAY_SIZE(init_data); i++) {
+ ret = bq25890_field_write(bq, init_data[i].id,
+ init_data[i].value);
+ if (ret < 0) {
+ dev_dbg(bq->dev, "Writing init data failed %d\n", ret);
+ return ret;
+ }
+ }
+
+ /* Configure ADC for continuous conversions when charging */
+ ret = bq25890_field_write(bq, F_CONV_RATE, !!bq->state.online);
+ if (ret < 0) {
+ dev_dbg(bq->dev, "Config ADC failed %d\n", ret);
+ return ret;
+ }
+
+ ret = bq25890_get_chip_state(bq, &bq->state);
+ if (ret < 0) {
+ dev_dbg(bq->dev, "Get state failed %d\n", ret);
+ return ret;
+ }
+
+ return 0;
+}
+
+static const enum power_supply_property bq25890_power_supply_props[] = {
+ POWER_SUPPLY_PROP_MANUFACTURER,
+ POWER_SUPPLY_PROP_MODEL_NAME,
+ POWER_SUPPLY_PROP_STATUS,
+ POWER_SUPPLY_PROP_CHARGE_TYPE,
+ POWER_SUPPLY_PROP_ONLINE,
+ POWER_SUPPLY_PROP_HEALTH,
+ POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX,
+ POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE,
+ POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX,
+ POWER_SUPPLY_PROP_PRECHARGE_CURRENT,
+ POWER_SUPPLY_PROP_CHARGE_TERM_CURRENT,
+ POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT,
+ POWER_SUPPLY_PROP_VOLTAGE_NOW,
+ POWER_SUPPLY_PROP_CURRENT_NOW,
+};
+
+static char *bq25890_charger_supplied_to[] = {
+ "main-battery",
+};
+
+static const struct power_supply_desc bq25890_power_supply_desc = {
+ .name = "bq25890-charger",
+ .type = POWER_SUPPLY_TYPE_USB,
+ .properties = bq25890_power_supply_props,
+ .num_properties = ARRAY_SIZE(bq25890_power_supply_props),
+ .get_property = bq25890_power_supply_get_property,
+};
+
+static int bq25890_power_supply_init(struct bq25890_device *bq)
+{
+ struct power_supply_config psy_cfg = { .drv_data = bq, };
+
+ psy_cfg.supplied_to = bq25890_charger_supplied_to;
+ psy_cfg.num_supplicants = ARRAY_SIZE(bq25890_charger_supplied_to);
+
+ bq->charger = power_supply_register(bq->dev, &bq25890_power_supply_desc,
+ &psy_cfg);
+
+ return PTR_ERR_OR_ZERO(bq->charger);
+}
+
+static void bq25890_usb_work(struct work_struct *data)
+{
+ int ret;
+ struct bq25890_device *bq =
+ container_of(data, struct bq25890_device, usb_work);
+
+ switch (bq->usb_event) {
+ case USB_EVENT_ID:
+ /* Enable boost mode */
+ ret = bq25890_field_write(bq, F_OTG_CFG, 1);
+ if (ret < 0)
+ goto error;
+ break;
+
+ case USB_EVENT_NONE:
+ /* Disable boost mode */
+ ret = bq25890_field_write(bq, F_OTG_CFG, 0);
+ if (ret < 0)
+ goto error;
+
+ power_supply_changed(bq->charger);
+ break;
+ }
+
+ return;
+
+error:
+ dev_err(bq->dev, "Error switching to boost/charger mode.\n");
+}
+
+static int bq25890_usb_notifier(struct notifier_block *nb, unsigned long val,
+ void *priv)
+{
+ struct bq25890_device *bq =
+ container_of(nb, struct bq25890_device, usb_nb);
+
+ bq->usb_event = val;
+ queue_work(system_power_efficient_wq, &bq->usb_work);
+
+ return NOTIFY_OK;
+}
+
+static int bq25890_get_chip_version(struct bq25890_device *bq)
+{
+ int id, rev;
+
+ id = bq25890_field_read(bq, F_PN);
+ if (id < 0) {
+ dev_err(bq->dev, "Cannot read chip ID.\n");
+ return id;
+ }
+
+ rev = bq25890_field_read(bq, F_DEV_REV);
+ if (rev < 0) {
+ dev_err(bq->dev, "Cannot read chip revision.\n");
+ return rev;
+ }
+
+ switch (id) {
+ case BQ25890_ID:
+ bq->chip_version = BQ25890;
+ break;
+
+ /* BQ25892 and BQ25896 share same ID 0 */
+ case BQ25896_ID:
+ switch (rev) {
+ case 2:
+ bq->chip_version = BQ25896;
+ break;
+ case 1:
+ bq->chip_version = BQ25892;
+ break;
+ default:
+ dev_err(bq->dev,
+ "Unknown device revision %d, assume BQ25892\n",
+ rev);
+ bq->chip_version = BQ25892;
+ }
+ break;
+
+ case BQ25895_ID:
+ bq->chip_version = BQ25895;
+ break;
+
+ default:
+ dev_err(bq->dev, "Unknown chip ID %d\n", id);
+ return -ENODEV;
+ }
+
+ return 0;
+}
+
+static int bq25890_irq_probe(struct bq25890_device *bq)
+{
+ struct gpio_desc *irq;
+
+ irq = devm_gpiod_get(bq->dev, BQ25890_IRQ_PIN, GPIOD_IN);
+ if (IS_ERR(irq)) {
+ dev_err(bq->dev, "Could not probe irq pin.\n");
+ return PTR_ERR(irq);
+ }
+
+ return gpiod_to_irq(irq);
+}
+
+static int bq25890_fw_read_u32_props(struct bq25890_device *bq)
+{
+ int ret;
+ u32 property;
+ int i;
+ struct bq25890_init_data *init = &bq->init_data;
+ struct {
+ char *name;
+ bool optional;
+ enum bq25890_table_ids tbl_id;
+ u8 *conv_data; /* holds converted value from given property */
+ } props[] = {
+ /* required properties */
+ {"ti,charge-current", false, TBL_ICHG, &init->ichg},
+ {"ti,battery-regulation-voltage", false, TBL_VREG, &init->vreg},
+ {"ti,termination-current", false, TBL_ITERM, &init->iterm},
+ {"ti,precharge-current", false, TBL_ITERM, &init->iprechg},
+ {"ti,minimum-sys-voltage", false, TBL_SYSVMIN, &init->sysvmin},
+ {"ti,boost-voltage", false, TBL_BOOSTV, &init->boostv},
+ {"ti,boost-max-current", false, TBL_BOOSTI, &init->boosti},
+
+ /* optional properties */
+ {"ti,thermal-regulation-threshold", true, TBL_TREG, &init->treg},
+ {"ti,ibatcomp-micro-ohms", true, TBL_RBATCOMP, &init->rbatcomp},
+ {"ti,ibatcomp-clamp-microvolt", true, TBL_VBATCOMP, &init->vclamp},
+ };
+
+ /* initialize data for optional properties */
+ init->treg = 3; /* 120 degrees Celsius */
+ init->rbatcomp = init->vclamp = 0; /* IBAT compensation disabled */
+
+ for (i = 0; i < ARRAY_SIZE(props); i++) {
+ ret = device_property_read_u32(bq->dev, props[i].name,
+ &property);
+ if (ret < 0) {
+ if (props[i].optional)
+ continue;
+
+ dev_err(bq->dev, "Unable to read property %d %s\n", ret,
+ props[i].name);
+
+ return ret;
+ }
+
+ *props[i].conv_data = bq25890_find_idx(property,
+ props[i].tbl_id);
+ }
+
+ return 0;
+}
+
+static int bq25890_fw_probe(struct bq25890_device *bq)
+{
+ int ret;
+ struct bq25890_init_data *init = &bq->init_data;
+
+ ret = bq25890_fw_read_u32_props(bq);
+ if (ret < 0)
+ return ret;
+
+ init->ilim_en = device_property_read_bool(bq->dev, "ti,use-ilim-pin");
+ init->boostf = device_property_read_bool(bq->dev, "ti,boost-low-freq");
+
+ return 0;
+}
+
+static int bq25890_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct device *dev = &client->dev;
+ struct bq25890_device *bq;
+ int ret;
+ int i;
+
+ bq = devm_kzalloc(dev, sizeof(*bq), GFP_KERNEL);
+ if (!bq)
+ return -ENOMEM;
+
+ bq->client = client;
+ bq->dev = dev;
+
+ mutex_init(&bq->lock);
+
+ bq->rmap = devm_regmap_init_i2c(client, &bq25890_regmap_config);
+ if (IS_ERR(bq->rmap)) {
+ dev_err(dev, "failed to allocate register map\n");
+ return PTR_ERR(bq->rmap);
+ }
+
+ for (i = 0; i < ARRAY_SIZE(bq25890_reg_fields); i++) {
+ const struct reg_field *reg_fields = bq25890_reg_fields;
+
+ bq->rmap_fields[i] = devm_regmap_field_alloc(dev, bq->rmap,
+ reg_fields[i]);
+ if (IS_ERR(bq->rmap_fields[i])) {
+ dev_err(dev, "cannot allocate regmap field\n");
+ return PTR_ERR(bq->rmap_fields[i]);
+ }
+ }
+
+ i2c_set_clientdata(client, bq);
+
+ ret = bq25890_get_chip_version(bq);
+ if (ret) {
+ dev_err(dev, "Cannot read chip ID or unknown chip.\n");
+ return ret;
+ }
+
+ if (!dev->platform_data) {
+ ret = bq25890_fw_probe(bq);
+ if (ret < 0) {
+ dev_err(dev, "Cannot read device properties.\n");
+ return ret;
+ }
+ } else {
+ return -ENODEV;
+ }
+
+ ret = bq25890_hw_init(bq);
+ if (ret < 0) {
+ dev_err(dev, "Cannot initialize the chip.\n");
+ return ret;
+ }
+
+ if (client->irq <= 0)
+ client->irq = bq25890_irq_probe(bq);
+
+ if (client->irq < 0) {
+ dev_err(dev, "No irq resource found.\n");
+ return client->irq;
+ }
+
+ /* OTG reporting */
+ bq->usb_phy = devm_usb_get_phy(dev, USB_PHY_TYPE_USB2);
+ if (!IS_ERR_OR_NULL(bq->usb_phy)) {
+ INIT_WORK(&bq->usb_work, bq25890_usb_work);
+ bq->usb_nb.notifier_call = bq25890_usb_notifier;
+ usb_register_notifier(bq->usb_phy, &bq->usb_nb);
+ }
+
+ ret = devm_request_threaded_irq(dev, client->irq, NULL,
+ bq25890_irq_handler_thread,
+ IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
+ BQ25890_IRQ_PIN, bq);
+ if (ret)
+ goto irq_fail;
+
+ ret = bq25890_power_supply_init(bq);
+ if (ret < 0) {
+ dev_err(dev, "Failed to register power supply\n");
+ goto irq_fail;
+ }
+
+ return 0;
+
+irq_fail:
+ if (!IS_ERR_OR_NULL(bq->usb_phy))
+ usb_unregister_notifier(bq->usb_phy, &bq->usb_nb);
+
+ return ret;
+}
+
+static int bq25890_remove(struct i2c_client *client)
+{
+ struct bq25890_device *bq = i2c_get_clientdata(client);
+
+ power_supply_unregister(bq->charger);
+
+ if (!IS_ERR_OR_NULL(bq->usb_phy))
+ usb_unregister_notifier(bq->usb_phy, &bq->usb_nb);
+
+ /* reset all registers to default values */
+ bq25890_chip_reset(bq);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int bq25890_suspend(struct device *dev)
+{
+ struct bq25890_device *bq = dev_get_drvdata(dev);
+
+ /*
+ * If charger is removed, while in suspend, make sure ADC is diabled
+ * since it consumes slightly more power.
+ */
+ return bq25890_field_write(bq, F_CONV_RATE, 0);
+}
+
+static int bq25890_resume(struct device *dev)
+{
+ int ret;
+ struct bq25890_device *bq = dev_get_drvdata(dev);
+
+ mutex_lock(&bq->lock);
+
+ ret = bq25890_get_chip_state(bq, &bq->state);
+ if (ret < 0)
+ goto unlock;
+
+ /* Re-enable ADC only if charger is plugged in. */
+ if (bq->state.online) {
+ ret = bq25890_field_write(bq, F_CONV_RATE, 1);
+ if (ret < 0)
+ goto unlock;
+ }
+
+ /* signal userspace, maybe state changed while suspended */
+ power_supply_changed(bq->charger);
+
+unlock:
+ mutex_unlock(&bq->lock);
+
+ return ret;
+}
+#endif
+
+static const struct dev_pm_ops bq25890_pm = {
+ SET_SYSTEM_SLEEP_PM_OPS(bq25890_suspend, bq25890_resume)
+};
+
+static const struct i2c_device_id bq25890_i2c_ids[] = {
+ { "bq25890", 0 },
+ { "bq25892", 0 },
+ { "bq25895", 0 },
+ { "bq25896", 0 },
+ {},
+};
+MODULE_DEVICE_TABLE(i2c, bq25890_i2c_ids);
+
+static const struct of_device_id bq25890_of_match[] = {
+ { .compatible = "ti,bq25890", },
+ { .compatible = "ti,bq25892", },
+ { .compatible = "ti,bq25895", },
+ { .compatible = "ti,bq25896", },
+ { },
+};
+MODULE_DEVICE_TABLE(of, bq25890_of_match);
+
+#ifdef CONFIG_ACPI
+static const struct acpi_device_id bq25890_acpi_match[] = {
+ {"BQ258900", 0},
+ {},
+};
+MODULE_DEVICE_TABLE(acpi, bq25890_acpi_match);
+#endif
+
+static struct i2c_driver bq25890_driver = {
+ .driver = {
+ .name = "bq25890-charger",
+ .of_match_table = of_match_ptr(bq25890_of_match),
+ .acpi_match_table = ACPI_PTR(bq25890_acpi_match),
+ .pm = &bq25890_pm,
+ },
+ .probe = bq25890_probe,
+ .remove = bq25890_remove,
+ .id_table = bq25890_i2c_ids,
+};
+module_i2c_driver(bq25890_driver);
+
+MODULE_AUTHOR("Laurentiu Palcu <laurentiu.palcu@intel.com>");
+MODULE_DESCRIPTION("bq25890 charger driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/power/supply/bq25980_charger.c b/drivers/power/supply/bq25980_charger.c
new file mode 100644
index 000000000..b94ecf814
--- /dev/null
+++ b/drivers/power/supply/bq25980_charger.c
@@ -0,0 +1,1298 @@
+// SPDX-License-Identifier: GPL-2.0
+// BQ25980 Battery Charger Driver
+// Copyright (C) 2020 Texas Instruments Incorporated - http://www.ti.com/
+
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/gpio/consumer.h>
+#include <linux/power_supply.h>
+#include <linux/regmap.h>
+#include <linux/types.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/moduleparam.h>
+#include <linux/slab.h>
+
+#include "bq25980_charger.h"
+
+struct bq25980_state {
+ bool dischg;
+ bool ovp;
+ bool ocp;
+ bool wdt;
+ bool tflt;
+ bool online;
+ bool ce;
+ bool hiz;
+ bool bypass;
+
+ u32 vbat_adc;
+ u32 vsys_adc;
+ u32 ibat_adc;
+};
+
+enum bq25980_id {
+ BQ25980,
+ BQ25975,
+ BQ25960,
+};
+
+struct bq25980_chip_info {
+
+ int model_id;
+
+ const struct regmap_config *regmap_config;
+
+ int busocp_def;
+ int busocp_sc_max;
+ int busocp_byp_max;
+ int busocp_sc_min;
+ int busocp_byp_min;
+
+ int busovp_sc_def;
+ int busovp_byp_def;
+ int busovp_sc_step;
+
+ int busovp_sc_offset;
+ int busovp_byp_step;
+ int busovp_byp_offset;
+ int busovp_sc_min;
+ int busovp_sc_max;
+ int busovp_byp_min;
+ int busovp_byp_max;
+
+ int batovp_def;
+ int batovp_max;
+ int batovp_min;
+ int batovp_step;
+ int batovp_offset;
+
+ int batocp_def;
+ int batocp_max;
+};
+
+struct bq25980_init_data {
+ u32 ichg;
+ u32 bypass_ilim;
+ u32 sc_ilim;
+ u32 vreg;
+ u32 iterm;
+ u32 iprechg;
+ u32 bypass_vlim;
+ u32 sc_vlim;
+ u32 ichg_max;
+ u32 vreg_max;
+};
+
+struct bq25980_device {
+ struct i2c_client *client;
+ struct device *dev;
+ struct power_supply *charger;
+ struct power_supply *battery;
+ struct mutex lock;
+ struct regmap *regmap;
+
+ char model_name[I2C_NAME_SIZE];
+
+ struct bq25980_init_data init_data;
+ const struct bq25980_chip_info *chip_info;
+ struct bq25980_state state;
+ int watchdog_timer;
+};
+
+static struct reg_default bq25980_reg_defs[] = {
+ {BQ25980_BATOVP, 0x5A},
+ {BQ25980_BATOVP_ALM, 0x46},
+ {BQ25980_BATOCP, 0x51},
+ {BQ25980_BATOCP_ALM, 0x50},
+ {BQ25980_BATUCP_ALM, 0x28},
+ {BQ25980_CHRGR_CTRL_1, 0x0},
+ {BQ25980_BUSOVP, 0x26},
+ {BQ25980_BUSOVP_ALM, 0x22},
+ {BQ25980_BUSOCP, 0xD},
+ {BQ25980_BUSOCP_ALM, 0xC},
+ {BQ25980_TEMP_CONTROL, 0x30},
+ {BQ25980_TDIE_ALM, 0xC8},
+ {BQ25980_TSBUS_FLT, 0x15},
+ {BQ25980_TSBAT_FLG, 0x15},
+ {BQ25980_VAC_CONTROL, 0x0},
+ {BQ25980_CHRGR_CTRL_2, 0x0},
+ {BQ25980_CHRGR_CTRL_3, 0x20},
+ {BQ25980_CHRGR_CTRL_4, 0x1D},
+ {BQ25980_CHRGR_CTRL_5, 0x18},
+ {BQ25980_STAT1, 0x0},
+ {BQ25980_STAT2, 0x0},
+ {BQ25980_STAT3, 0x0},
+ {BQ25980_STAT4, 0x0},
+ {BQ25980_STAT5, 0x0},
+ {BQ25980_FLAG1, 0x0},
+ {BQ25980_FLAG2, 0x0},
+ {BQ25980_FLAG3, 0x0},
+ {BQ25980_FLAG4, 0x0},
+ {BQ25980_FLAG5, 0x0},
+ {BQ25980_MASK1, 0x0},
+ {BQ25980_MASK2, 0x0},
+ {BQ25980_MASK3, 0x0},
+ {BQ25980_MASK4, 0x0},
+ {BQ25980_MASK5, 0x0},
+ {BQ25980_DEVICE_INFO, 0x8},
+ {BQ25980_ADC_CONTROL1, 0x0},
+ {BQ25980_ADC_CONTROL2, 0x0},
+ {BQ25980_IBUS_ADC_LSB, 0x0},
+ {BQ25980_IBUS_ADC_MSB, 0x0},
+ {BQ25980_VBUS_ADC_LSB, 0x0},
+ {BQ25980_VBUS_ADC_MSB, 0x0},
+ {BQ25980_VAC1_ADC_LSB, 0x0},
+ {BQ25980_VAC2_ADC_LSB, 0x0},
+ {BQ25980_VOUT_ADC_LSB, 0x0},
+ {BQ25980_VBAT_ADC_LSB, 0x0},
+ {BQ25980_IBAT_ADC_MSB, 0x0},
+ {BQ25980_IBAT_ADC_LSB, 0x0},
+ {BQ25980_TSBUS_ADC_LSB, 0x0},
+ {BQ25980_TSBAT_ADC_LSB, 0x0},
+ {BQ25980_TDIE_ADC_LSB, 0x0},
+ {BQ25980_DEGLITCH_TIME, 0x0},
+ {BQ25980_CHRGR_CTRL_6, 0x0},
+};
+
+static struct reg_default bq25975_reg_defs[] = {
+ {BQ25980_BATOVP, 0x5A},
+ {BQ25980_BATOVP_ALM, 0x46},
+ {BQ25980_BATOCP, 0x51},
+ {BQ25980_BATOCP_ALM, 0x50},
+ {BQ25980_BATUCP_ALM, 0x28},
+ {BQ25980_CHRGR_CTRL_1, 0x0},
+ {BQ25980_BUSOVP, 0x26},
+ {BQ25980_BUSOVP_ALM, 0x22},
+ {BQ25980_BUSOCP, 0xD},
+ {BQ25980_BUSOCP_ALM, 0xC},
+ {BQ25980_TEMP_CONTROL, 0x30},
+ {BQ25980_TDIE_ALM, 0xC8},
+ {BQ25980_TSBUS_FLT, 0x15},
+ {BQ25980_TSBAT_FLG, 0x15},
+ {BQ25980_VAC_CONTROL, 0x0},
+ {BQ25980_CHRGR_CTRL_2, 0x0},
+ {BQ25980_CHRGR_CTRL_3, 0x20},
+ {BQ25980_CHRGR_CTRL_4, 0x1D},
+ {BQ25980_CHRGR_CTRL_5, 0x18},
+ {BQ25980_STAT1, 0x0},
+ {BQ25980_STAT2, 0x0},
+ {BQ25980_STAT3, 0x0},
+ {BQ25980_STAT4, 0x0},
+ {BQ25980_STAT5, 0x0},
+ {BQ25980_FLAG1, 0x0},
+ {BQ25980_FLAG2, 0x0},
+ {BQ25980_FLAG3, 0x0},
+ {BQ25980_FLAG4, 0x0},
+ {BQ25980_FLAG5, 0x0},
+ {BQ25980_MASK1, 0x0},
+ {BQ25980_MASK2, 0x0},
+ {BQ25980_MASK3, 0x0},
+ {BQ25980_MASK4, 0x0},
+ {BQ25980_MASK5, 0x0},
+ {BQ25980_DEVICE_INFO, 0x8},
+ {BQ25980_ADC_CONTROL1, 0x0},
+ {BQ25980_ADC_CONTROL2, 0x0},
+ {BQ25980_IBUS_ADC_LSB, 0x0},
+ {BQ25980_IBUS_ADC_MSB, 0x0},
+ {BQ25980_VBUS_ADC_LSB, 0x0},
+ {BQ25980_VBUS_ADC_MSB, 0x0},
+ {BQ25980_VAC1_ADC_LSB, 0x0},
+ {BQ25980_VAC2_ADC_LSB, 0x0},
+ {BQ25980_VOUT_ADC_LSB, 0x0},
+ {BQ25980_VBAT_ADC_LSB, 0x0},
+ {BQ25980_IBAT_ADC_MSB, 0x0},
+ {BQ25980_IBAT_ADC_LSB, 0x0},
+ {BQ25980_TSBUS_ADC_LSB, 0x0},
+ {BQ25980_TSBAT_ADC_LSB, 0x0},
+ {BQ25980_TDIE_ADC_LSB, 0x0},
+ {BQ25980_DEGLITCH_TIME, 0x0},
+ {BQ25980_CHRGR_CTRL_6, 0x0},
+};
+
+static struct reg_default bq25960_reg_defs[] = {
+ {BQ25980_BATOVP, 0x5A},
+ {BQ25980_BATOVP_ALM, 0x46},
+ {BQ25980_BATOCP, 0x51},
+ {BQ25980_BATOCP_ALM, 0x50},
+ {BQ25980_BATUCP_ALM, 0x28},
+ {BQ25980_CHRGR_CTRL_1, 0x0},
+ {BQ25980_BUSOVP, 0x26},
+ {BQ25980_BUSOVP_ALM, 0x22},
+ {BQ25980_BUSOCP, 0xD},
+ {BQ25980_BUSOCP_ALM, 0xC},
+ {BQ25980_TEMP_CONTROL, 0x30},
+ {BQ25980_TDIE_ALM, 0xC8},
+ {BQ25980_TSBUS_FLT, 0x15},
+ {BQ25980_TSBAT_FLG, 0x15},
+ {BQ25980_VAC_CONTROL, 0x0},
+ {BQ25980_CHRGR_CTRL_2, 0x0},
+ {BQ25980_CHRGR_CTRL_3, 0x20},
+ {BQ25980_CHRGR_CTRL_4, 0x1D},
+ {BQ25980_CHRGR_CTRL_5, 0x18},
+ {BQ25980_STAT1, 0x0},
+ {BQ25980_STAT2, 0x0},
+ {BQ25980_STAT3, 0x0},
+ {BQ25980_STAT4, 0x0},
+ {BQ25980_STAT5, 0x0},
+ {BQ25980_FLAG1, 0x0},
+ {BQ25980_FLAG2, 0x0},
+ {BQ25980_FLAG3, 0x0},
+ {BQ25980_FLAG4, 0x0},
+ {BQ25980_FLAG5, 0x0},
+ {BQ25980_MASK1, 0x0},
+ {BQ25980_MASK2, 0x0},
+ {BQ25980_MASK3, 0x0},
+ {BQ25980_MASK4, 0x0},
+ {BQ25980_MASK5, 0x0},
+ {BQ25980_DEVICE_INFO, 0x8},
+ {BQ25980_ADC_CONTROL1, 0x0},
+ {BQ25980_ADC_CONTROL2, 0x0},
+ {BQ25980_IBUS_ADC_LSB, 0x0},
+ {BQ25980_IBUS_ADC_MSB, 0x0},
+ {BQ25980_VBUS_ADC_LSB, 0x0},
+ {BQ25980_VBUS_ADC_MSB, 0x0},
+ {BQ25980_VAC1_ADC_LSB, 0x0},
+ {BQ25980_VAC2_ADC_LSB, 0x0},
+ {BQ25980_VOUT_ADC_LSB, 0x0},
+ {BQ25980_VBAT_ADC_LSB, 0x0},
+ {BQ25980_IBAT_ADC_MSB, 0x0},
+ {BQ25980_IBAT_ADC_LSB, 0x0},
+ {BQ25980_TSBUS_ADC_LSB, 0x0},
+ {BQ25980_TSBAT_ADC_LSB, 0x0},
+ {BQ25980_TDIE_ADC_LSB, 0x0},
+ {BQ25980_DEGLITCH_TIME, 0x0},
+ {BQ25980_CHRGR_CTRL_6, 0x0},
+};
+
+static int bq25980_watchdog_time[BQ25980_NUM_WD_VAL] = {5000, 10000, 50000,
+ 300000};
+
+static int bq25980_get_input_curr_lim(struct bq25980_device *bq)
+{
+ unsigned int busocp_reg_code;
+ int ret;
+
+ ret = regmap_read(bq->regmap, BQ25980_BUSOCP, &busocp_reg_code);
+ if (ret)
+ return ret;
+
+ return (busocp_reg_code * BQ25980_BUSOCP_STEP_uA) + BQ25980_BUSOCP_OFFSET_uA;
+}
+
+static int bq25980_set_hiz(struct bq25980_device *bq, int setting)
+{
+ return regmap_update_bits(bq->regmap, BQ25980_CHRGR_CTRL_2,
+ BQ25980_EN_HIZ, setting);
+}
+
+static int bq25980_set_input_curr_lim(struct bq25980_device *bq, int busocp)
+{
+ unsigned int busocp_reg_code;
+ int ret;
+
+ if (!busocp)
+ return bq25980_set_hiz(bq, BQ25980_ENABLE_HIZ);
+
+ bq25980_set_hiz(bq, BQ25980_DISABLE_HIZ);
+
+ if (busocp < BQ25980_BUSOCP_MIN_uA)
+ busocp = BQ25980_BUSOCP_MIN_uA;
+
+ if (bq->state.bypass)
+ busocp = min(busocp, bq->chip_info->busocp_sc_max);
+ else
+ busocp = min(busocp, bq->chip_info->busocp_byp_max);
+
+ busocp_reg_code = (busocp - BQ25980_BUSOCP_OFFSET_uA)
+ / BQ25980_BUSOCP_STEP_uA;
+
+ ret = regmap_write(bq->regmap, BQ25980_BUSOCP, busocp_reg_code);
+ if (ret)
+ return ret;
+
+ return regmap_write(bq->regmap, BQ25980_BUSOCP_ALM, busocp_reg_code);
+}
+
+static int bq25980_get_input_volt_lim(struct bq25980_device *bq)
+{
+ unsigned int busovp_reg_code;
+ unsigned int busovp_offset;
+ unsigned int busovp_step;
+ int ret;
+
+ if (bq->state.bypass) {
+ busovp_step = bq->chip_info->busovp_byp_step;
+ busovp_offset = bq->chip_info->busovp_byp_offset;
+ } else {
+ busovp_step = bq->chip_info->busovp_sc_step;
+ busovp_offset = bq->chip_info->busovp_sc_offset;
+ }
+
+ ret = regmap_read(bq->regmap, BQ25980_BUSOVP, &busovp_reg_code);
+ if (ret)
+ return ret;
+
+ return (busovp_reg_code * busovp_step) + busovp_offset;
+}
+
+static int bq25980_set_input_volt_lim(struct bq25980_device *bq, int busovp)
+{
+ unsigned int busovp_reg_code;
+ unsigned int busovp_step;
+ unsigned int busovp_offset;
+ int ret;
+
+ if (bq->state.bypass) {
+ busovp_step = bq->chip_info->busovp_byp_step;
+ busovp_offset = bq->chip_info->busovp_byp_offset;
+ if (busovp > bq->chip_info->busovp_byp_max)
+ busovp = bq->chip_info->busovp_byp_max;
+ else if (busovp < bq->chip_info->busovp_byp_min)
+ busovp = bq->chip_info->busovp_byp_min;
+ } else {
+ busovp_step = bq->chip_info->busovp_sc_step;
+ busovp_offset = bq->chip_info->busovp_sc_offset;
+ if (busovp > bq->chip_info->busovp_sc_max)
+ busovp = bq->chip_info->busovp_sc_max;
+ else if (busovp < bq->chip_info->busovp_sc_min)
+ busovp = bq->chip_info->busovp_sc_min;
+ }
+
+ busovp_reg_code = (busovp - busovp_offset) / busovp_step;
+
+ ret = regmap_write(bq->regmap, BQ25980_BUSOVP, busovp_reg_code);
+ if (ret)
+ return ret;
+
+ return regmap_write(bq->regmap, BQ25980_BUSOVP_ALM, busovp_reg_code);
+}
+
+static int bq25980_get_const_charge_curr(struct bq25980_device *bq)
+{
+ unsigned int batocp_reg_code;
+ int ret;
+
+ ret = regmap_read(bq->regmap, BQ25980_BATOCP, &batocp_reg_code);
+ if (ret)
+ return ret;
+
+ return (batocp_reg_code & BQ25980_BATOCP_MASK) *
+ BQ25980_BATOCP_STEP_uA;
+}
+
+static int bq25980_set_const_charge_curr(struct bq25980_device *bq, int batocp)
+{
+ unsigned int batocp_reg_code;
+ int ret;
+
+ batocp = max(batocp, BQ25980_BATOCP_MIN_uA);
+ batocp = min(batocp, bq->chip_info->batocp_max);
+
+ batocp_reg_code = batocp / BQ25980_BATOCP_STEP_uA;
+
+ ret = regmap_update_bits(bq->regmap, BQ25980_BATOCP,
+ BQ25980_BATOCP_MASK, batocp_reg_code);
+ if (ret)
+ return ret;
+
+ return regmap_update_bits(bq->regmap, BQ25980_BATOCP_ALM,
+ BQ25980_BATOCP_MASK, batocp_reg_code);
+}
+
+static int bq25980_get_const_charge_volt(struct bq25980_device *bq)
+{
+ unsigned int batovp_reg_code;
+ int ret;
+
+ ret = regmap_read(bq->regmap, BQ25980_BATOVP, &batovp_reg_code);
+ if (ret)
+ return ret;
+
+ return ((batovp_reg_code * bq->chip_info->batovp_step) +
+ bq->chip_info->batovp_offset);
+}
+
+static int bq25980_set_const_charge_volt(struct bq25980_device *bq, int batovp)
+{
+ unsigned int batovp_reg_code;
+ int ret;
+
+ if (batovp < bq->chip_info->batovp_min)
+ batovp = bq->chip_info->batovp_min;
+
+ if (batovp > bq->chip_info->batovp_max)
+ batovp = bq->chip_info->batovp_max;
+
+ batovp_reg_code = (batovp - bq->chip_info->batovp_offset) /
+ bq->chip_info->batovp_step;
+
+ ret = regmap_write(bq->regmap, BQ25980_BATOVP, batovp_reg_code);
+ if (ret)
+ return ret;
+
+ return regmap_write(bq->regmap, BQ25980_BATOVP_ALM, batovp_reg_code);
+}
+
+static int bq25980_set_bypass(struct bq25980_device *bq, bool en_bypass)
+{
+ int ret;
+
+ if (en_bypass)
+ ret = regmap_update_bits(bq->regmap, BQ25980_CHRGR_CTRL_2,
+ BQ25980_EN_BYPASS, BQ25980_EN_BYPASS);
+ else
+ ret = regmap_update_bits(bq->regmap, BQ25980_CHRGR_CTRL_2,
+ BQ25980_EN_BYPASS, en_bypass);
+ if (ret)
+ return ret;
+
+ bq->state.bypass = en_bypass;
+
+ return bq->state.bypass;
+}
+
+static int bq25980_set_chg_en(struct bq25980_device *bq, bool en_chg)
+{
+ int ret;
+
+ if (en_chg)
+ ret = regmap_update_bits(bq->regmap, BQ25980_CHRGR_CTRL_2,
+ BQ25980_CHG_EN, BQ25980_CHG_EN);
+ else
+ ret = regmap_update_bits(bq->regmap, BQ25980_CHRGR_CTRL_2,
+ BQ25980_CHG_EN, en_chg);
+ if (ret)
+ return ret;
+
+ bq->state.ce = en_chg;
+
+ return 0;
+}
+
+static int bq25980_get_adc_ibus(struct bq25980_device *bq)
+{
+ int ibus_adc_lsb, ibus_adc_msb;
+ u16 ibus_adc;
+ int ret;
+
+ ret = regmap_read(bq->regmap, BQ25980_IBUS_ADC_MSB, &ibus_adc_msb);
+ if (ret)
+ return ret;
+
+ ret = regmap_read(bq->regmap, BQ25980_IBUS_ADC_LSB, &ibus_adc_lsb);
+ if (ret)
+ return ret;
+
+ ibus_adc = (ibus_adc_msb << 8) | ibus_adc_lsb;
+
+ if (ibus_adc_msb & BQ25980_ADC_POLARITY_BIT)
+ return ((ibus_adc ^ 0xffff) + 1) * BQ25980_ADC_CURR_STEP_uA;
+
+ return ibus_adc * BQ25980_ADC_CURR_STEP_uA;
+}
+
+static int bq25980_get_adc_vbus(struct bq25980_device *bq)
+{
+ int vbus_adc_lsb, vbus_adc_msb;
+ u16 vbus_adc;
+ int ret;
+
+ ret = regmap_read(bq->regmap, BQ25980_VBUS_ADC_MSB, &vbus_adc_msb);
+ if (ret)
+ return ret;
+
+ ret = regmap_read(bq->regmap, BQ25980_VBUS_ADC_LSB, &vbus_adc_lsb);
+ if (ret)
+ return ret;
+
+ vbus_adc = (vbus_adc_msb << 8) | vbus_adc_lsb;
+
+ return vbus_adc * BQ25980_ADC_VOLT_STEP_uV;
+}
+
+static int bq25980_get_ibat_adc(struct bq25980_device *bq)
+{
+ int ret;
+ int ibat_adc_lsb, ibat_adc_msb;
+ int ibat_adc;
+
+ ret = regmap_read(bq->regmap, BQ25980_IBAT_ADC_MSB, &ibat_adc_msb);
+ if (ret)
+ return ret;
+
+ ret = regmap_read(bq->regmap, BQ25980_IBAT_ADC_LSB, &ibat_adc_lsb);
+ if (ret)
+ return ret;
+
+ ibat_adc = (ibat_adc_msb << 8) | ibat_adc_lsb;
+
+ if (ibat_adc_msb & BQ25980_ADC_POLARITY_BIT)
+ return ((ibat_adc ^ 0xffff) + 1) * BQ25980_ADC_CURR_STEP_uA;
+
+ return ibat_adc * BQ25980_ADC_CURR_STEP_uA;
+}
+
+static int bq25980_get_adc_vbat(struct bq25980_device *bq)
+{
+ int vsys_adc_lsb, vsys_adc_msb;
+ u16 vsys_adc;
+ int ret;
+
+ ret = regmap_read(bq->regmap, BQ25980_VBAT_ADC_MSB, &vsys_adc_msb);
+ if (ret)
+ return ret;
+
+ ret = regmap_read(bq->regmap, BQ25980_VBAT_ADC_LSB, &vsys_adc_lsb);
+ if (ret)
+ return ret;
+
+ vsys_adc = (vsys_adc_msb << 8) | vsys_adc_lsb;
+
+ return vsys_adc * BQ25980_ADC_VOLT_STEP_uV;
+}
+
+static int bq25980_get_state(struct bq25980_device *bq,
+ struct bq25980_state *state)
+{
+ unsigned int chg_ctrl_2;
+ unsigned int stat1;
+ unsigned int stat2;
+ unsigned int stat3;
+ unsigned int stat4;
+ unsigned int ibat_adc_msb;
+ int ret;
+
+ ret = regmap_read(bq->regmap, BQ25980_STAT1, &stat1);
+ if (ret)
+ return ret;
+
+ ret = regmap_read(bq->regmap, BQ25980_STAT2, &stat2);
+ if (ret)
+ return ret;
+
+ ret = regmap_read(bq->regmap, BQ25980_STAT3, &stat3);
+ if (ret)
+ return ret;
+
+ ret = regmap_read(bq->regmap, BQ25980_STAT4, &stat4);
+ if (ret)
+ return ret;
+
+ ret = regmap_read(bq->regmap, BQ25980_CHRGR_CTRL_2, &chg_ctrl_2);
+ if (ret)
+ return ret;
+
+ ret = regmap_read(bq->regmap, BQ25980_IBAT_ADC_MSB, &ibat_adc_msb);
+ if (ret)
+ return ret;
+
+ state->dischg = ibat_adc_msb & BQ25980_ADC_POLARITY_BIT;
+ state->ovp = (stat1 & BQ25980_STAT1_OVP_MASK) |
+ (stat3 & BQ25980_STAT3_OVP_MASK);
+ state->ocp = (stat1 & BQ25980_STAT1_OCP_MASK) |
+ (stat2 & BQ25980_STAT2_OCP_MASK);
+ state->tflt = stat4 & BQ25980_STAT4_TFLT_MASK;
+ state->wdt = stat4 & BQ25980_WD_STAT;
+ state->online = stat3 & BQ25980_PRESENT_MASK;
+ state->ce = chg_ctrl_2 & BQ25980_CHG_EN;
+ state->hiz = chg_ctrl_2 & BQ25980_EN_HIZ;
+ state->bypass = chg_ctrl_2 & BQ25980_EN_BYPASS;
+
+ return 0;
+}
+
+static int bq25980_get_battery_property(struct power_supply *psy,
+ enum power_supply_property psp,
+ union power_supply_propval *val)
+{
+ struct bq25980_device *bq = power_supply_get_drvdata(psy);
+ int ret = 0;
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX:
+ val->intval = bq->init_data.ichg_max;
+ break;
+
+ case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX:
+ val->intval = bq->init_data.vreg_max;
+ break;
+
+ case POWER_SUPPLY_PROP_CURRENT_NOW:
+ ret = bq25980_get_ibat_adc(bq);
+ val->intval = ret;
+ break;
+
+ case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+ ret = bq25980_get_adc_vbat(bq);
+ if (ret < 0)
+ return ret;
+
+ val->intval = ret;
+ break;
+
+ default:
+ return -EINVAL;
+ }
+
+ return ret;
+}
+
+static int bq25980_set_charger_property(struct power_supply *psy,
+ enum power_supply_property prop,
+ const union power_supply_propval *val)
+{
+ struct bq25980_device *bq = power_supply_get_drvdata(psy);
+ int ret = -EINVAL;
+
+ switch (prop) {
+ case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT:
+ ret = bq25980_set_input_curr_lim(bq, val->intval);
+ if (ret)
+ return ret;
+ break;
+
+ case POWER_SUPPLY_PROP_INPUT_VOLTAGE_LIMIT:
+ ret = bq25980_set_input_volt_lim(bq, val->intval);
+ if (ret)
+ return ret;
+ break;
+
+ case POWER_SUPPLY_PROP_CHARGE_TYPE:
+ ret = bq25980_set_bypass(bq, val->intval);
+ if (ret)
+ return ret;
+ break;
+
+ case POWER_SUPPLY_PROP_STATUS:
+ ret = bq25980_set_chg_en(bq, val->intval);
+ if (ret)
+ return ret;
+ break;
+
+ case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT:
+ ret = bq25980_set_const_charge_curr(bq, val->intval);
+ if (ret)
+ return ret;
+ break;
+
+ case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE:
+ ret = bq25980_set_const_charge_volt(bq, val->intval);
+ if (ret)
+ return ret;
+ break;
+
+ default:
+ return -EINVAL;
+ }
+
+ return ret;
+}
+
+static int bq25980_get_charger_property(struct power_supply *psy,
+ enum power_supply_property psp,
+ union power_supply_propval *val)
+{
+ struct bq25980_device *bq = power_supply_get_drvdata(psy);
+ struct bq25980_state state;
+ int ret = 0;
+
+ mutex_lock(&bq->lock);
+ ret = bq25980_get_state(bq, &state);
+ mutex_unlock(&bq->lock);
+ if (ret)
+ return ret;
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_MANUFACTURER:
+ val->strval = BQ25980_MANUFACTURER;
+ break;
+ case POWER_SUPPLY_PROP_MODEL_NAME:
+ val->strval = bq->model_name;
+ break;
+ case POWER_SUPPLY_PROP_ONLINE:
+ val->intval = state.online;
+ break;
+
+ case POWER_SUPPLY_PROP_INPUT_VOLTAGE_LIMIT:
+ ret = bq25980_get_input_volt_lim(bq);
+ if (ret < 0)
+ return ret;
+ val->intval = ret;
+ break;
+
+ case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT:
+ ret = bq25980_get_input_curr_lim(bq);
+ if (ret < 0)
+ return ret;
+
+ val->intval = ret;
+ break;
+
+ case POWER_SUPPLY_PROP_HEALTH:
+ val->intval = POWER_SUPPLY_HEALTH_GOOD;
+
+ if (state.tflt)
+ val->intval = POWER_SUPPLY_HEALTH_OVERHEAT;
+ else if (state.ovp)
+ val->intval = POWER_SUPPLY_HEALTH_OVERVOLTAGE;
+ else if (state.ocp)
+ val->intval = POWER_SUPPLY_HEALTH_OVERCURRENT;
+ else if (state.wdt)
+ val->intval =
+ POWER_SUPPLY_HEALTH_WATCHDOG_TIMER_EXPIRE;
+ break;
+
+ case POWER_SUPPLY_PROP_STATUS:
+ val->intval = POWER_SUPPLY_STATUS_UNKNOWN;
+
+ if ((state.ce) && (!state.hiz))
+ val->intval = POWER_SUPPLY_STATUS_CHARGING;
+ else if (state.dischg)
+ val->intval = POWER_SUPPLY_STATUS_DISCHARGING;
+ else if (!state.ce)
+ val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING;
+ break;
+
+ case POWER_SUPPLY_PROP_CHARGE_TYPE:
+ val->intval = POWER_SUPPLY_CHARGE_TYPE_UNKNOWN;
+
+ if (!state.ce)
+ val->intval = POWER_SUPPLY_CHARGE_TYPE_NONE;
+ else if (state.bypass)
+ val->intval = POWER_SUPPLY_CHARGE_TYPE_FAST;
+ else if (!state.bypass)
+ val->intval = POWER_SUPPLY_CHARGE_TYPE_STANDARD;
+ break;
+
+ case POWER_SUPPLY_PROP_CURRENT_NOW:
+ ret = bq25980_get_adc_ibus(bq);
+ if (ret < 0)
+ return ret;
+
+ val->intval = ret;
+ break;
+
+ case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+ ret = bq25980_get_adc_vbus(bq);
+ if (ret < 0)
+ return ret;
+
+ val->intval = ret;
+ break;
+
+ case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT:
+ ret = bq25980_get_const_charge_curr(bq);
+ if (ret < 0)
+ return ret;
+
+ val->intval = ret;
+ break;
+
+ case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE:
+ ret = bq25980_get_const_charge_volt(bq);
+ if (ret < 0)
+ return ret;
+
+ val->intval = ret;
+ break;
+
+ default:
+ return -EINVAL;
+ }
+
+ return ret;
+}
+
+static bool bq25980_state_changed(struct bq25980_device *bq,
+ struct bq25980_state *new_state)
+{
+ struct bq25980_state old_state;
+
+ mutex_lock(&bq->lock);
+ old_state = bq->state;
+ mutex_unlock(&bq->lock);
+
+ return (old_state.dischg != new_state->dischg ||
+ old_state.ovp != new_state->ovp ||
+ old_state.ocp != new_state->ocp ||
+ old_state.online != new_state->online ||
+ old_state.wdt != new_state->wdt ||
+ old_state.tflt != new_state->tflt ||
+ old_state.ce != new_state->ce ||
+ old_state.hiz != new_state->hiz ||
+ old_state.bypass != new_state->bypass);
+}
+
+static irqreturn_t bq25980_irq_handler_thread(int irq, void *private)
+{
+ struct bq25980_device *bq = private;
+ struct bq25980_state state;
+ int ret;
+
+ ret = bq25980_get_state(bq, &state);
+ if (ret < 0)
+ goto irq_out;
+
+ if (!bq25980_state_changed(bq, &state))
+ goto irq_out;
+
+ mutex_lock(&bq->lock);
+ bq->state = state;
+ mutex_unlock(&bq->lock);
+
+ power_supply_changed(bq->charger);
+
+irq_out:
+ return IRQ_HANDLED;
+}
+
+static enum power_supply_property bq25980_power_supply_props[] = {
+ POWER_SUPPLY_PROP_MANUFACTURER,
+ POWER_SUPPLY_PROP_MODEL_NAME,
+ POWER_SUPPLY_PROP_STATUS,
+ POWER_SUPPLY_PROP_ONLINE,
+ POWER_SUPPLY_PROP_HEALTH,
+ POWER_SUPPLY_PROP_INPUT_VOLTAGE_LIMIT,
+ POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT,
+ POWER_SUPPLY_PROP_CHARGE_TYPE,
+ POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT,
+ POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE,
+ POWER_SUPPLY_PROP_CURRENT_NOW,
+ POWER_SUPPLY_PROP_VOLTAGE_NOW,
+};
+
+static enum power_supply_property bq25980_battery_props[] = {
+ POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX,
+ POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX,
+ POWER_SUPPLY_PROP_CURRENT_NOW,
+ POWER_SUPPLY_PROP_VOLTAGE_NOW,
+};
+
+static char *bq25980_charger_supplied_to[] = {
+ "main-battery",
+};
+
+static int bq25980_property_is_writeable(struct power_supply *psy,
+ enum power_supply_property prop)
+{
+ switch (prop) {
+ case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT:
+ case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE:
+ case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT:
+ case POWER_SUPPLY_PROP_CHARGE_TYPE:
+ case POWER_SUPPLY_PROP_STATUS:
+ case POWER_SUPPLY_PROP_INPUT_VOLTAGE_LIMIT:
+ return true;
+ default:
+ return false;
+ }
+}
+
+static const struct power_supply_desc bq25980_power_supply_desc = {
+ .name = "bq25980-charger",
+ .type = POWER_SUPPLY_TYPE_MAINS,
+ .properties = bq25980_power_supply_props,
+ .num_properties = ARRAY_SIZE(bq25980_power_supply_props),
+ .get_property = bq25980_get_charger_property,
+ .set_property = bq25980_set_charger_property,
+ .property_is_writeable = bq25980_property_is_writeable,
+};
+
+static struct power_supply_desc bq25980_battery_desc = {
+ .name = "bq25980-battery",
+ .type = POWER_SUPPLY_TYPE_BATTERY,
+ .get_property = bq25980_get_battery_property,
+ .properties = bq25980_battery_props,
+ .num_properties = ARRAY_SIZE(bq25980_battery_props),
+ .property_is_writeable = bq25980_property_is_writeable,
+};
+
+
+static bool bq25980_is_volatile_reg(struct device *dev, unsigned int reg)
+{
+ switch (reg) {
+ case BQ25980_CHRGR_CTRL_2:
+ case BQ25980_STAT1...BQ25980_FLAG5:
+ case BQ25980_ADC_CONTROL1...BQ25980_TDIE_ADC_LSB:
+ return true;
+ default:
+ return false;
+ }
+}
+
+static const struct regmap_config bq25980_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+
+ .max_register = BQ25980_CHRGR_CTRL_6,
+ .reg_defaults = bq25980_reg_defs,
+ .num_reg_defaults = ARRAY_SIZE(bq25980_reg_defs),
+ .cache_type = REGCACHE_RBTREE,
+ .volatile_reg = bq25980_is_volatile_reg,
+};
+
+static const struct regmap_config bq25975_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+
+ .max_register = BQ25980_CHRGR_CTRL_6,
+ .reg_defaults = bq25975_reg_defs,
+ .num_reg_defaults = ARRAY_SIZE(bq25975_reg_defs),
+ .cache_type = REGCACHE_RBTREE,
+ .volatile_reg = bq25980_is_volatile_reg,
+};
+
+static const struct regmap_config bq25960_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+
+ .max_register = BQ25980_CHRGR_CTRL_6,
+ .reg_defaults = bq25960_reg_defs,
+ .num_reg_defaults = ARRAY_SIZE(bq25960_reg_defs),
+ .cache_type = REGCACHE_RBTREE,
+ .volatile_reg = bq25980_is_volatile_reg,
+};
+
+static const struct bq25980_chip_info bq25980_chip_info_tbl[] = {
+ [BQ25980] = {
+ .model_id = BQ25980,
+ .regmap_config = &bq25980_regmap_config,
+
+ .busocp_def = BQ25980_BUSOCP_DFLT_uA,
+ .busocp_sc_min = BQ25960_BUSOCP_SC_MAX_uA,
+ .busocp_sc_max = BQ25980_BUSOCP_SC_MAX_uA,
+ .busocp_byp_max = BQ25980_BUSOCP_BYP_MAX_uA,
+ .busocp_byp_min = BQ25980_BUSOCP_MIN_uA,
+
+ .busovp_sc_def = BQ25980_BUSOVP_DFLT_uV,
+ .busovp_byp_def = BQ25980_BUSOVP_BYPASS_DFLT_uV,
+ .busovp_sc_step = BQ25980_BUSOVP_SC_STEP_uV,
+ .busovp_sc_offset = BQ25980_BUSOVP_SC_OFFSET_uV,
+ .busovp_byp_step = BQ25980_BUSOVP_BYP_STEP_uV,
+ .busovp_byp_offset = BQ25980_BUSOVP_BYP_OFFSET_uV,
+ .busovp_sc_min = BQ25980_BUSOVP_SC_MIN_uV,
+ .busovp_sc_max = BQ25980_BUSOVP_SC_MAX_uV,
+ .busovp_byp_min = BQ25980_BUSOVP_BYP_MIN_uV,
+ .busovp_byp_max = BQ25980_BUSOVP_BYP_MAX_uV,
+
+ .batovp_def = BQ25980_BATOVP_DFLT_uV,
+ .batovp_max = BQ25980_BATOVP_MAX_uV,
+ .batovp_min = BQ25980_BATOVP_MIN_uV,
+ .batovp_step = BQ25980_BATOVP_STEP_uV,
+ .batovp_offset = BQ25980_BATOVP_OFFSET_uV,
+
+ .batocp_def = BQ25980_BATOCP_DFLT_uA,
+ .batocp_max = BQ25980_BATOCP_MAX_uA,
+ },
+
+ [BQ25975] = {
+ .model_id = BQ25975,
+ .regmap_config = &bq25975_regmap_config,
+
+ .busocp_def = BQ25975_BUSOCP_DFLT_uA,
+ .busocp_sc_min = BQ25975_BUSOCP_SC_MAX_uA,
+ .busocp_sc_max = BQ25975_BUSOCP_SC_MAX_uA,
+ .busocp_byp_min = BQ25980_BUSOCP_MIN_uA,
+ .busocp_byp_max = BQ25975_BUSOCP_BYP_MAX_uA,
+
+ .busovp_sc_def = BQ25975_BUSOVP_DFLT_uV,
+ .busovp_byp_def = BQ25975_BUSOVP_BYPASS_DFLT_uV,
+ .busovp_sc_step = BQ25975_BUSOVP_SC_STEP_uV,
+ .busovp_sc_offset = BQ25975_BUSOVP_SC_OFFSET_uV,
+ .busovp_byp_step = BQ25975_BUSOVP_BYP_STEP_uV,
+ .busovp_byp_offset = BQ25975_BUSOVP_BYP_OFFSET_uV,
+ .busovp_sc_min = BQ25975_BUSOVP_SC_MIN_uV,
+ .busovp_sc_max = BQ25975_BUSOVP_SC_MAX_uV,
+ .busovp_byp_min = BQ25975_BUSOVP_BYP_MIN_uV,
+ .busovp_byp_max = BQ25975_BUSOVP_BYP_MAX_uV,
+
+ .batovp_def = BQ25975_BATOVP_DFLT_uV,
+ .batovp_max = BQ25975_BATOVP_MAX_uV,
+ .batovp_min = BQ25975_BATOVP_MIN_uV,
+ .batovp_step = BQ25975_BATOVP_STEP_uV,
+ .batovp_offset = BQ25975_BATOVP_OFFSET_uV,
+
+ .batocp_def = BQ25980_BATOCP_DFLT_uA,
+ .batocp_max = BQ25980_BATOCP_MAX_uA,
+ },
+
+ [BQ25960] = {
+ .model_id = BQ25960,
+ .regmap_config = &bq25960_regmap_config,
+
+ .busocp_def = BQ25960_BUSOCP_DFLT_uA,
+ .busocp_sc_min = BQ25960_BUSOCP_SC_MAX_uA,
+ .busocp_sc_max = BQ25960_BUSOCP_SC_MAX_uA,
+ .busocp_byp_min = BQ25960_BUSOCP_SC_MAX_uA,
+ .busocp_byp_max = BQ25960_BUSOCP_BYP_MAX_uA,
+
+ .busovp_sc_def = BQ25975_BUSOVP_DFLT_uV,
+ .busovp_byp_def = BQ25975_BUSOVP_BYPASS_DFLT_uV,
+ .busovp_sc_step = BQ25960_BUSOVP_SC_STEP_uV,
+ .busovp_sc_offset = BQ25960_BUSOVP_SC_OFFSET_uV,
+ .busovp_byp_step = BQ25960_BUSOVP_BYP_STEP_uV,
+ .busovp_byp_offset = BQ25960_BUSOVP_BYP_OFFSET_uV,
+ .busovp_sc_min = BQ25960_BUSOVP_SC_MIN_uV,
+ .busovp_sc_max = BQ25960_BUSOVP_SC_MAX_uV,
+ .busovp_byp_min = BQ25960_BUSOVP_BYP_MIN_uV,
+ .busovp_byp_max = BQ25960_BUSOVP_BYP_MAX_uV,
+
+ .batovp_def = BQ25960_BATOVP_DFLT_uV,
+ .batovp_max = BQ25960_BATOVP_MAX_uV,
+ .batovp_min = BQ25960_BATOVP_MIN_uV,
+ .batovp_step = BQ25960_BATOVP_STEP_uV,
+ .batovp_offset = BQ25960_BATOVP_OFFSET_uV,
+
+ .batocp_def = BQ25960_BATOCP_DFLT_uA,
+ .batocp_max = BQ25960_BATOCP_MAX_uA,
+ },
+};
+
+static int bq25980_power_supply_init(struct bq25980_device *bq,
+ struct device *dev)
+{
+ struct power_supply_config psy_cfg = { .drv_data = bq,
+ .of_node = dev->of_node, };
+
+ psy_cfg.supplied_to = bq25980_charger_supplied_to;
+ psy_cfg.num_supplicants = ARRAY_SIZE(bq25980_charger_supplied_to);
+
+ bq->charger = devm_power_supply_register(bq->dev,
+ &bq25980_power_supply_desc,
+ &psy_cfg);
+ if (IS_ERR(bq->charger))
+ return -EINVAL;
+
+ bq->battery = devm_power_supply_register(bq->dev,
+ &bq25980_battery_desc,
+ &psy_cfg);
+ if (IS_ERR(bq->battery))
+ return -EINVAL;
+
+ return 0;
+}
+
+static int bq25980_hw_init(struct bq25980_device *bq)
+{
+ struct power_supply_battery_info bat_info = { };
+ int wd_reg_val = BQ25980_WATCHDOG_DIS;
+ int wd_max_val = BQ25980_NUM_WD_VAL - 1;
+ int ret = 0;
+ int curr_val;
+ int volt_val;
+ int i;
+
+ if (bq->watchdog_timer) {
+ if (bq->watchdog_timer >= bq25980_watchdog_time[wd_max_val])
+ wd_reg_val = wd_max_val;
+ else {
+ for (i = 0; i < wd_max_val; i++) {
+ if (bq->watchdog_timer > bq25980_watchdog_time[i] &&
+ bq->watchdog_timer < bq25980_watchdog_time[i + 1]) {
+ wd_reg_val = i;
+ break;
+ }
+ }
+ }
+ }
+
+ ret = regmap_update_bits(bq->regmap, BQ25980_CHRGR_CTRL_3,
+ BQ25980_WATCHDOG_MASK, wd_reg_val);
+ if (ret)
+ return ret;
+
+ ret = power_supply_get_battery_info(bq->charger, &bat_info);
+ if (ret) {
+ dev_warn(bq->dev, "battery info missing\n");
+ return -EINVAL;
+ }
+
+ bq->init_data.ichg_max = bat_info.constant_charge_current_max_ua;
+ bq->init_data.vreg_max = bat_info.constant_charge_voltage_max_uv;
+
+ if (bq->state.bypass) {
+ ret = regmap_update_bits(bq->regmap, BQ25980_CHRGR_CTRL_2,
+ BQ25980_EN_BYPASS, BQ25980_EN_BYPASS);
+ if (ret)
+ return ret;
+
+ curr_val = bq->init_data.bypass_ilim;
+ volt_val = bq->init_data.bypass_vlim;
+ } else {
+ curr_val = bq->init_data.sc_ilim;
+ volt_val = bq->init_data.sc_vlim;
+ }
+
+ ret = bq25980_set_input_curr_lim(bq, curr_val);
+ if (ret)
+ return ret;
+
+ ret = bq25980_set_input_volt_lim(bq, volt_val);
+ if (ret)
+ return ret;
+
+ return regmap_update_bits(bq->regmap, BQ25980_ADC_CONTROL1,
+ BQ25980_ADC_EN, BQ25980_ADC_EN);
+}
+
+static int bq25980_parse_dt(struct bq25980_device *bq)
+{
+ int ret;
+
+ ret = device_property_read_u32(bq->dev, "ti,watchdog-timeout-ms",
+ &bq->watchdog_timer);
+ if (ret)
+ bq->watchdog_timer = BQ25980_WATCHDOG_MIN;
+
+ if (bq->watchdog_timer > BQ25980_WATCHDOG_MAX ||
+ bq->watchdog_timer < BQ25980_WATCHDOG_MIN)
+ return -EINVAL;
+
+ ret = device_property_read_u32(bq->dev,
+ "ti,sc-ovp-limit-microvolt",
+ &bq->init_data.sc_vlim);
+ if (ret)
+ bq->init_data.sc_vlim = bq->chip_info->busovp_sc_def;
+
+ if (bq->init_data.sc_vlim > bq->chip_info->busovp_sc_max ||
+ bq->init_data.sc_vlim < bq->chip_info->busovp_sc_min) {
+ dev_err(bq->dev, "SC ovp limit is out of range\n");
+ return -EINVAL;
+ }
+
+ ret = device_property_read_u32(bq->dev,
+ "ti,sc-ocp-limit-microamp",
+ &bq->init_data.sc_ilim);
+ if (ret)
+ bq->init_data.sc_ilim = bq->chip_info->busocp_def;
+
+ if (bq->init_data.sc_ilim > bq->chip_info->busocp_sc_max ||
+ bq->init_data.sc_ilim < bq->chip_info->busocp_sc_min) {
+ dev_err(bq->dev, "SC ocp limit is out of range\n");
+ return -EINVAL;
+ }
+
+ ret = device_property_read_u32(bq->dev,
+ "ti,bypass-ovp-limit-microvolt",
+ &bq->init_data.bypass_vlim);
+ if (ret)
+ bq->init_data.bypass_vlim = bq->chip_info->busovp_byp_def;
+
+ if (bq->init_data.bypass_vlim > bq->chip_info->busovp_byp_max ||
+ bq->init_data.bypass_vlim < bq->chip_info->busovp_byp_min) {
+ dev_err(bq->dev, "Bypass ovp limit is out of range\n");
+ return -EINVAL;
+ }
+
+ ret = device_property_read_u32(bq->dev,
+ "ti,bypass-ocp-limit-microamp",
+ &bq->init_data.bypass_ilim);
+ if (ret)
+ bq->init_data.bypass_ilim = bq->chip_info->busocp_def;
+
+ if (bq->init_data.bypass_ilim > bq->chip_info->busocp_byp_max ||
+ bq->init_data.bypass_ilim < bq->chip_info->busocp_byp_min) {
+ dev_err(bq->dev, "Bypass ocp limit is out of range\n");
+ return -EINVAL;
+ }
+
+
+ bq->state.bypass = device_property_read_bool(bq->dev,
+ "ti,bypass-enable");
+ return 0;
+}
+
+static int bq25980_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct device *dev = &client->dev;
+ struct bq25980_device *bq;
+ int ret;
+
+ bq = devm_kzalloc(dev, sizeof(*bq), GFP_KERNEL);
+ if (!bq)
+ return -ENOMEM;
+
+ bq->client = client;
+ bq->dev = dev;
+
+ mutex_init(&bq->lock);
+
+ strncpy(bq->model_name, id->name, I2C_NAME_SIZE);
+ bq->chip_info = &bq25980_chip_info_tbl[id->driver_data];
+
+ bq->regmap = devm_regmap_init_i2c(client,
+ bq->chip_info->regmap_config);
+ if (IS_ERR(bq->regmap)) {
+ dev_err(dev, "Failed to allocate register map\n");
+ return PTR_ERR(bq->regmap);
+ }
+
+ i2c_set_clientdata(client, bq);
+
+ ret = bq25980_parse_dt(bq);
+ if (ret) {
+ dev_err(dev, "Failed to read device tree properties%d\n", ret);
+ return ret;
+ }
+
+ if (client->irq) {
+ ret = devm_request_threaded_irq(dev, client->irq, NULL,
+ bq25980_irq_handler_thread,
+ IRQF_TRIGGER_FALLING |
+ IRQF_ONESHOT,
+ dev_name(&client->dev), bq);
+ if (ret)
+ return ret;
+ }
+
+ ret = bq25980_power_supply_init(bq, dev);
+ if (ret) {
+ dev_err(dev, "Failed to register power supply\n");
+ return ret;
+ }
+
+ ret = bq25980_hw_init(bq);
+ if (ret) {
+ dev_err(dev, "Cannot initialize the chip.\n");
+ return ret;
+ }
+
+ return 0;
+}
+
+static const struct i2c_device_id bq25980_i2c_ids[] = {
+ { "bq25980", BQ25980 },
+ { "bq25975", BQ25975 },
+ { "bq25975", BQ25975 },
+ {},
+};
+MODULE_DEVICE_TABLE(i2c, bq25980_i2c_ids);
+
+static const struct of_device_id bq25980_of_match[] = {
+ { .compatible = "ti,bq25980", .data = (void *)BQ25980 },
+ { .compatible = "ti,bq25975", .data = (void *)BQ25975 },
+ { .compatible = "ti,bq25960", .data = (void *)BQ25960 },
+ { },
+};
+MODULE_DEVICE_TABLE(of, bq25980_of_match);
+
+static struct i2c_driver bq25980_driver = {
+ .driver = {
+ .name = "bq25980-charger",
+ .of_match_table = bq25980_of_match,
+ },
+ .probe = bq25980_probe,
+ .id_table = bq25980_i2c_ids,
+};
+module_i2c_driver(bq25980_driver);
+
+MODULE_AUTHOR("Dan Murphy <dmurphy@ti.com>");
+MODULE_AUTHOR("Ricardo Rivera-Matos <r-rivera-matos@ti.com>");
+MODULE_DESCRIPTION("bq25980 charger driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/power/supply/bq25980_charger.h b/drivers/power/supply/bq25980_charger.h
new file mode 100644
index 000000000..39f94eba5
--- /dev/null
+++ b/drivers/power/supply/bq25980_charger.h
@@ -0,0 +1,178 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/* Copyright (C) 2020 Texas Instruments Incorporated - http://www.ti.com/ */
+
+#ifndef BQ25980_CHARGER_H
+#define BQ25980_CHARGER_H
+
+#define BQ25980_MANUFACTURER "Texas Instruments"
+
+#define BQ25980_BATOVP 0x0
+#define BQ25980_BATOVP_ALM 0x1
+#define BQ25980_BATOCP 0x2
+#define BQ25980_BATOCP_ALM 0x3
+#define BQ25980_BATUCP_ALM 0x4
+#define BQ25980_CHRGR_CTRL_1 0x5
+#define BQ25980_BUSOVP 0x6
+#define BQ25980_BUSOVP_ALM 0x7
+#define BQ25980_BUSOCP 0x8
+#define BQ25980_BUSOCP_ALM 0x9
+#define BQ25980_TEMP_CONTROL 0xA
+#define BQ25980_TDIE_ALM 0xB
+#define BQ25980_TSBUS_FLT 0xC
+#define BQ25980_TSBAT_FLG 0xD
+#define BQ25980_VAC_CONTROL 0xE
+#define BQ25980_CHRGR_CTRL_2 0xF
+#define BQ25980_CHRGR_CTRL_3 0x10
+#define BQ25980_CHRGR_CTRL_4 0x11
+#define BQ25980_CHRGR_CTRL_5 0x12
+#define BQ25980_STAT1 0x13
+#define BQ25980_STAT2 0x14
+#define BQ25980_STAT3 0x15
+#define BQ25980_STAT4 0x16
+#define BQ25980_STAT5 0x17
+#define BQ25980_FLAG1 0x18
+#define BQ25980_FLAG2 0x19
+#define BQ25980_FLAG3 0x1A
+#define BQ25980_FLAG4 0x1B
+#define BQ25980_FLAG5 0x1C
+#define BQ25980_MASK1 0x1D
+#define BQ25980_MASK2 0x1E
+#define BQ25980_MASK3 0x1F
+#define BQ25980_MASK4 0x20
+#define BQ25980_MASK5 0x21
+#define BQ25980_DEVICE_INFO 0x22
+#define BQ25980_ADC_CONTROL1 0x23
+#define BQ25980_ADC_CONTROL2 0x24
+#define BQ25980_IBUS_ADC_MSB 0x25
+#define BQ25980_IBUS_ADC_LSB 0x26
+#define BQ25980_VBUS_ADC_MSB 0x27
+#define BQ25980_VBUS_ADC_LSB 0x28
+#define BQ25980_VAC1_ADC_MSB 0x29
+#define BQ25980_VAC1_ADC_LSB 0x2A
+#define BQ25980_VAC2_ADC_MSB 0x2B
+#define BQ25980_VAC2_ADC_LSB 0x2C
+#define BQ25980_VOUT_ADC_MSB 0x2D
+#define BQ25980_VOUT_ADC_LSB 0x2E
+#define BQ25980_VBAT_ADC_MSB 0x2F
+#define BQ25980_VBAT_ADC_LSB 0x30
+#define BQ25980_IBAT_ADC_MSB 0x31
+#define BQ25980_IBAT_ADC_LSB 0x32
+#define BQ25980_TSBUS_ADC_MSB 0x33
+#define BQ25980_TSBUS_ADC_LSB 0x34
+#define BQ25980_TSBAT_ADC_MSB 0x35
+#define BQ25980_TSBAT_ADC_LSB 0x36
+#define BQ25980_TDIE_ADC_MSB 0x37
+#define BQ25980_TDIE_ADC_LSB 0x38
+#define BQ25980_DEGLITCH_TIME 0x39
+#define BQ25980_CHRGR_CTRL_6 0x3A
+
+#define BQ25980_BUSOCP_STEP_uA 250000
+#define BQ25980_BUSOCP_OFFSET_uA 1000000
+
+#define BQ25980_BUSOCP_DFLT_uA 4250000
+#define BQ25975_BUSOCP_DFLT_uA 4250000
+#define BQ25960_BUSOCP_DFLT_uA 3250000
+
+#define BQ25980_BUSOCP_MIN_uA 1000000
+
+#define BQ25980_BUSOCP_SC_MAX_uA 5750000
+#define BQ25975_BUSOCP_SC_MAX_uA 5750000
+#define BQ25960_BUSOCP_SC_MAX_uA 3750000
+
+#define BQ25980_BUSOCP_BYP_MAX_uA 8500000
+#define BQ25975_BUSOCP_BYP_MAX_uA 8500000
+#define BQ25960_BUSOCP_BYP_MAX_uA 5750000
+
+#define BQ25980_BUSOVP_SC_STEP_uV 100000
+#define BQ25975_BUSOVP_SC_STEP_uV 50000
+#define BQ25960_BUSOVP_SC_STEP_uV 50000
+#define BQ25980_BUSOVP_SC_OFFSET_uV 14000000
+#define BQ25975_BUSOVP_SC_OFFSET_uV 7000000
+#define BQ25960_BUSOVP_SC_OFFSET_uV 7000000
+
+#define BQ25980_BUSOVP_BYP_STEP_uV 50000
+#define BQ25975_BUSOVP_BYP_STEP_uV 25000
+#define BQ25960_BUSOVP_BYP_STEP_uV 25000
+#define BQ25980_BUSOVP_BYP_OFFSET_uV 7000000
+#define BQ25975_BUSOVP_BYP_OFFSET_uV 3500000
+#define BQ25960_BUSOVP_BYP_OFFSET_uV 3500000
+
+#define BQ25980_BUSOVP_DFLT_uV 17800000
+#define BQ25980_BUSOVP_BYPASS_DFLT_uV 8900000
+#define BQ25975_BUSOVP_DFLT_uV 8900000
+#define BQ25975_BUSOVP_BYPASS_DFLT_uV 4450000
+#define BQ25960_BUSOVP_DFLT_uV 8900000
+
+#define BQ25980_BUSOVP_SC_MIN_uV 14000000
+#define BQ25975_BUSOVP_SC_MIN_uV 7000000
+#define BQ25960_BUSOVP_SC_MIN_uV 7000000
+#define BQ25980_BUSOVP_BYP_MIN_uV 7000000
+#define BQ25975_BUSOVP_BYP_MIN_uV 3500000
+#define BQ25960_BUSOVP_BYP_MIN_uV 3500000
+
+#define BQ25980_BUSOVP_SC_MAX_uV 22000000
+#define BQ25975_BUSOVP_SC_MAX_uV 12750000
+#define BQ25960_BUSOVP_SC_MAX_uV 12750000
+
+#define BQ25980_BUSOVP_BYP_MAX_uV 12750000
+#define BQ25975_BUSOVP_BYP_MAX_uV 6500000
+#define BQ25960_BUSOVP_BYP_MAX_uV 6500000
+
+#define BQ25980_BATOVP_STEP_uV 20000
+#define BQ25975_BATOVP_STEP_uV 10000
+#define BQ25960_BATOVP_STEP_uV 10000
+
+#define BQ25980_BATOVP_OFFSET_uV 7000000
+#define BQ25975_BATOVP_OFFSET_uV 3500000
+#define BQ25960_BATOVP_OFFSET_uV 3500000
+
+#define BQ25980_BATOVP_DFLT_uV 14000000
+#define BQ25975_BATOVP_DFLT_uV 8900000
+#define BQ25960_BATOVP_DFLT_uV 8900000
+
+#define BQ25980_BATOVP_MIN_uV 7000000
+#define BQ25975_BATOVP_MIN_uV 3500000
+#define BQ25960_BATOVP_MIN_uV 3500000
+
+#define BQ25980_BATOVP_MAX_uV 9540000
+#define BQ25975_BATOVP_MAX_uV 4770000
+#define BQ25960_BATOVP_MAX_uV 4770000
+
+#define BQ25980_BATOCP_STEP_uA 100000
+
+#define BQ25980_BATOCP_MASK GENMASK(6, 0)
+
+#define BQ25980_BATOCP_DFLT_uA 8100000
+#define BQ25960_BATOCP_DFLT_uA 6100000
+
+#define BQ25980_BATOCP_MIN_uA 2000000
+
+#define BQ25980_BATOCP_MAX_uA 11000000
+#define BQ25975_BATOCP_MAX_uA 11000000
+#define BQ25960_BATOCP_MAX_uA 7000000
+
+#define BQ25980_ENABLE_HIZ 0xff
+#define BQ25980_DISABLE_HIZ 0x0
+#define BQ25980_EN_BYPASS BIT(3)
+#define BQ25980_STAT1_OVP_MASK (BIT(6) | BIT(5) | BIT(0))
+#define BQ25980_STAT3_OVP_MASK (BIT(7) | BIT(6))
+#define BQ25980_STAT1_OCP_MASK BIT(3)
+#define BQ25980_STAT2_OCP_MASK (BIT(6) | BIT(1))
+#define BQ25980_STAT4_TFLT_MASK GENMASK(5, 1)
+#define BQ25980_WD_STAT BIT(0)
+#define BQ25980_PRESENT_MASK GENMASK(4, 2)
+#define BQ25980_CHG_EN BIT(4)
+#define BQ25980_EN_HIZ BIT(6)
+#define BQ25980_ADC_EN BIT(7)
+
+#define BQ25980_ADC_VOLT_STEP_uV 1000
+#define BQ25980_ADC_CURR_STEP_uA 1000
+#define BQ25980_ADC_POLARITY_BIT BIT(7)
+
+#define BQ25980_WATCHDOG_MASK GENMASK(4, 3)
+#define BQ25980_WATCHDOG_DIS BIT(2)
+#define BQ25980_WATCHDOG_MAX 300000
+#define BQ25980_WATCHDOG_MIN 0
+#define BQ25980_NUM_WD_VAL 4
+
+#endif /* BQ25980_CHARGER_H */
diff --git a/drivers/power/supply/bq27xxx_battery.c b/drivers/power/supply/bq27xxx_battery.c
new file mode 100644
index 000000000..0673e0fe0
--- /dev/null
+++ b/drivers/power/supply/bq27xxx_battery.c
@@ -0,0 +1,2090 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * BQ27xxx battery driver
+ *
+ * Copyright (C) 2008 Rodolfo Giometti <giometti@linux.it>
+ * Copyright (C) 2008 Eurotech S.p.A. <info@eurotech.it>
+ * Copyright (C) 2010-2011 Lars-Peter Clausen <lars@metafoo.de>
+ * Copyright (C) 2011 Pali Rohár <pali@kernel.org>
+ * Copyright (C) 2017 Liam Breck <kernel@networkimprov.net>
+ *
+ * Based on a previous work by Copyright (C) 2008 Texas Instruments, Inc.
+ *
+ * Datasheets:
+ * https://www.ti.com/product/bq27000
+ * https://www.ti.com/product/bq27200
+ * https://www.ti.com/product/bq27010
+ * https://www.ti.com/product/bq27210
+ * https://www.ti.com/product/bq27500
+ * https://www.ti.com/product/bq27510-g1
+ * https://www.ti.com/product/bq27510-g2
+ * https://www.ti.com/product/bq27510-g3
+ * https://www.ti.com/product/bq27520-g1
+ * https://www.ti.com/product/bq27520-g2
+ * https://www.ti.com/product/bq27520-g3
+ * https://www.ti.com/product/bq27520-g4
+ * https://www.ti.com/product/bq27530-g1
+ * https://www.ti.com/product/bq27531-g1
+ * https://www.ti.com/product/bq27541-g1
+ * https://www.ti.com/product/bq27542-g1
+ * https://www.ti.com/product/bq27546-g1
+ * https://www.ti.com/product/bq27742-g1
+ * https://www.ti.com/product/bq27545-g1
+ * https://www.ti.com/product/bq27421-g1
+ * https://www.ti.com/product/bq27425-g1
+ * https://www.ti.com/product/bq27426
+ * https://www.ti.com/product/bq27411-g1
+ * https://www.ti.com/product/bq27441-g1
+ * https://www.ti.com/product/bq27621-g1
+ * https://www.ti.com/product/bq27z561
+ * https://www.ti.com/product/bq28z610
+ * https://www.ti.com/product/bq34z100-g1
+ */
+
+#include <linux/device.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/param.h>
+#include <linux/jiffies.h>
+#include <linux/workqueue.h>
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+#include <linux/power_supply.h>
+#include <linux/slab.h>
+#include <linux/of.h>
+
+#include <linux/power/bq27xxx_battery.h>
+
+#define BQ27XXX_MANUFACTURER "Texas Instruments"
+
+/* BQ27XXX Flags */
+#define BQ27XXX_FLAG_DSC BIT(0)
+#define BQ27XXX_FLAG_SOCF BIT(1) /* State-of-Charge threshold final */
+#define BQ27XXX_FLAG_SOC1 BIT(2) /* State-of-Charge threshold 1 */
+#define BQ27XXX_FLAG_CFGUP BIT(4)
+#define BQ27XXX_FLAG_FC BIT(9)
+#define BQ27XXX_FLAG_OTD BIT(14)
+#define BQ27XXX_FLAG_OTC BIT(15)
+#define BQ27XXX_FLAG_UT BIT(14)
+#define BQ27XXX_FLAG_OT BIT(15)
+
+/* BQ27000 has different layout for Flags register */
+#define BQ27000_FLAG_EDVF BIT(0) /* Final End-of-Discharge-Voltage flag */
+#define BQ27000_FLAG_EDV1 BIT(1) /* First End-of-Discharge-Voltage flag */
+#define BQ27000_FLAG_CI BIT(4) /* Capacity Inaccurate flag */
+#define BQ27000_FLAG_FC BIT(5)
+#define BQ27000_FLAG_CHGS BIT(7) /* Charge state flag */
+
+/* BQ27Z561 has different layout for Flags register */
+#define BQ27Z561_FLAG_FDC BIT(4) /* Battery fully discharged */
+#define BQ27Z561_FLAG_FC BIT(5) /* Battery fully charged */
+#define BQ27Z561_FLAG_DIS_CH BIT(6) /* Battery is discharging */
+
+/* control register params */
+#define BQ27XXX_SEALED 0x20
+#define BQ27XXX_SET_CFGUPDATE 0x13
+#define BQ27XXX_SOFT_RESET 0x42
+#define BQ27XXX_RESET 0x41
+
+#define BQ27XXX_RS (20) /* Resistor sense mOhm */
+#define BQ27XXX_POWER_CONSTANT (29200) /* 29.2 µV^2 * 1000 */
+#define BQ27XXX_CURRENT_CONSTANT (3570) /* 3.57 µV * 1000 */
+
+#define INVALID_REG_ADDR 0xff
+
+/*
+ * bq27xxx_reg_index - Register names
+ *
+ * These are indexes into a device's register mapping array.
+ */
+
+enum bq27xxx_reg_index {
+ BQ27XXX_REG_CTRL = 0, /* Control */
+ BQ27XXX_REG_TEMP, /* Temperature */
+ BQ27XXX_REG_INT_TEMP, /* Internal Temperature */
+ BQ27XXX_REG_VOLT, /* Voltage */
+ BQ27XXX_REG_AI, /* Average Current */
+ BQ27XXX_REG_FLAGS, /* Flags */
+ BQ27XXX_REG_TTE, /* Time-to-Empty */
+ BQ27XXX_REG_TTF, /* Time-to-Full */
+ BQ27XXX_REG_TTES, /* Time-to-Empty Standby */
+ BQ27XXX_REG_TTECP, /* Time-to-Empty at Constant Power */
+ BQ27XXX_REG_NAC, /* Nominal Available Capacity */
+ BQ27XXX_REG_FCC, /* Full Charge Capacity */
+ BQ27XXX_REG_CYCT, /* Cycle Count */
+ BQ27XXX_REG_AE, /* Available Energy */
+ BQ27XXX_REG_SOC, /* State-of-Charge */
+ BQ27XXX_REG_DCAP, /* Design Capacity */
+ BQ27XXX_REG_AP, /* Average Power */
+ BQ27XXX_DM_CTRL, /* Block Data Control */
+ BQ27XXX_DM_CLASS, /* Data Class */
+ BQ27XXX_DM_BLOCK, /* Data Block */
+ BQ27XXX_DM_DATA, /* Block Data */
+ BQ27XXX_DM_CKSUM, /* Block Data Checksum */
+ BQ27XXX_REG_MAX, /* sentinel */
+};
+
+#define BQ27XXX_DM_REG_ROWS \
+ [BQ27XXX_DM_CTRL] = 0x61, \
+ [BQ27XXX_DM_CLASS] = 0x3e, \
+ [BQ27XXX_DM_BLOCK] = 0x3f, \
+ [BQ27XXX_DM_DATA] = 0x40, \
+ [BQ27XXX_DM_CKSUM] = 0x60
+
+/* Register mappings */
+static u8
+ bq27000_regs[BQ27XXX_REG_MAX] = {
+ [BQ27XXX_REG_CTRL] = 0x00,
+ [BQ27XXX_REG_TEMP] = 0x06,
+ [BQ27XXX_REG_INT_TEMP] = INVALID_REG_ADDR,
+ [BQ27XXX_REG_VOLT] = 0x08,
+ [BQ27XXX_REG_AI] = 0x14,
+ [BQ27XXX_REG_FLAGS] = 0x0a,
+ [BQ27XXX_REG_TTE] = 0x16,
+ [BQ27XXX_REG_TTF] = 0x18,
+ [BQ27XXX_REG_TTES] = 0x1c,
+ [BQ27XXX_REG_TTECP] = 0x26,
+ [BQ27XXX_REG_NAC] = 0x0c,
+ [BQ27XXX_REG_FCC] = 0x12,
+ [BQ27XXX_REG_CYCT] = 0x2a,
+ [BQ27XXX_REG_AE] = 0x22,
+ [BQ27XXX_REG_SOC] = 0x0b,
+ [BQ27XXX_REG_DCAP] = 0x76,
+ [BQ27XXX_REG_AP] = 0x24,
+ [BQ27XXX_DM_CTRL] = INVALID_REG_ADDR,
+ [BQ27XXX_DM_CLASS] = INVALID_REG_ADDR,
+ [BQ27XXX_DM_BLOCK] = INVALID_REG_ADDR,
+ [BQ27XXX_DM_DATA] = INVALID_REG_ADDR,
+ [BQ27XXX_DM_CKSUM] = INVALID_REG_ADDR,
+ },
+ bq27010_regs[BQ27XXX_REG_MAX] = {
+ [BQ27XXX_REG_CTRL] = 0x00,
+ [BQ27XXX_REG_TEMP] = 0x06,
+ [BQ27XXX_REG_INT_TEMP] = INVALID_REG_ADDR,
+ [BQ27XXX_REG_VOLT] = 0x08,
+ [BQ27XXX_REG_AI] = 0x14,
+ [BQ27XXX_REG_FLAGS] = 0x0a,
+ [BQ27XXX_REG_TTE] = 0x16,
+ [BQ27XXX_REG_TTF] = 0x18,
+ [BQ27XXX_REG_TTES] = 0x1c,
+ [BQ27XXX_REG_TTECP] = 0x26,
+ [BQ27XXX_REG_NAC] = 0x0c,
+ [BQ27XXX_REG_FCC] = 0x12,
+ [BQ27XXX_REG_CYCT] = 0x2a,
+ [BQ27XXX_REG_AE] = INVALID_REG_ADDR,
+ [BQ27XXX_REG_SOC] = 0x0b,
+ [BQ27XXX_REG_DCAP] = 0x76,
+ [BQ27XXX_REG_AP] = INVALID_REG_ADDR,
+ [BQ27XXX_DM_CTRL] = INVALID_REG_ADDR,
+ [BQ27XXX_DM_CLASS] = INVALID_REG_ADDR,
+ [BQ27XXX_DM_BLOCK] = INVALID_REG_ADDR,
+ [BQ27XXX_DM_DATA] = INVALID_REG_ADDR,
+ [BQ27XXX_DM_CKSUM] = INVALID_REG_ADDR,
+ },
+ bq2750x_regs[BQ27XXX_REG_MAX] = {
+ [BQ27XXX_REG_CTRL] = 0x00,
+ [BQ27XXX_REG_TEMP] = 0x06,
+ [BQ27XXX_REG_INT_TEMP] = 0x28,
+ [BQ27XXX_REG_VOLT] = 0x08,
+ [BQ27XXX_REG_AI] = 0x14,
+ [BQ27XXX_REG_FLAGS] = 0x0a,
+ [BQ27XXX_REG_TTE] = 0x16,
+ [BQ27XXX_REG_TTF] = INVALID_REG_ADDR,
+ [BQ27XXX_REG_TTES] = 0x1a,
+ [BQ27XXX_REG_TTECP] = INVALID_REG_ADDR,
+ [BQ27XXX_REG_NAC] = 0x0c,
+ [BQ27XXX_REG_FCC] = 0x12,
+ [BQ27XXX_REG_CYCT] = 0x2a,
+ [BQ27XXX_REG_AE] = INVALID_REG_ADDR,
+ [BQ27XXX_REG_SOC] = 0x2c,
+ [BQ27XXX_REG_DCAP] = 0x3c,
+ [BQ27XXX_REG_AP] = INVALID_REG_ADDR,
+ BQ27XXX_DM_REG_ROWS,
+ },
+#define bq2751x_regs bq27510g3_regs
+#define bq2752x_regs bq27510g3_regs
+ bq27500_regs[BQ27XXX_REG_MAX] = {
+ [BQ27XXX_REG_CTRL] = 0x00,
+ [BQ27XXX_REG_TEMP] = 0x06,
+ [BQ27XXX_REG_INT_TEMP] = INVALID_REG_ADDR,
+ [BQ27XXX_REG_VOLT] = 0x08,
+ [BQ27XXX_REG_AI] = 0x14,
+ [BQ27XXX_REG_FLAGS] = 0x0a,
+ [BQ27XXX_REG_TTE] = 0x16,
+ [BQ27XXX_REG_TTF] = 0x18,
+ [BQ27XXX_REG_TTES] = 0x1c,
+ [BQ27XXX_REG_TTECP] = 0x26,
+ [BQ27XXX_REG_NAC] = 0x0c,
+ [BQ27XXX_REG_FCC] = 0x12,
+ [BQ27XXX_REG_CYCT] = 0x2a,
+ [BQ27XXX_REG_AE] = 0x22,
+ [BQ27XXX_REG_SOC] = 0x2c,
+ [BQ27XXX_REG_DCAP] = 0x3c,
+ [BQ27XXX_REG_AP] = 0x24,
+ BQ27XXX_DM_REG_ROWS,
+ },
+#define bq27510g1_regs bq27500_regs
+#define bq27510g2_regs bq27500_regs
+ bq27510g3_regs[BQ27XXX_REG_MAX] = {
+ [BQ27XXX_REG_CTRL] = 0x00,
+ [BQ27XXX_REG_TEMP] = 0x06,
+ [BQ27XXX_REG_INT_TEMP] = 0x28,
+ [BQ27XXX_REG_VOLT] = 0x08,
+ [BQ27XXX_REG_AI] = 0x14,
+ [BQ27XXX_REG_FLAGS] = 0x0a,
+ [BQ27XXX_REG_TTE] = 0x16,
+ [BQ27XXX_REG_TTF] = INVALID_REG_ADDR,
+ [BQ27XXX_REG_TTES] = 0x1a,
+ [BQ27XXX_REG_TTECP] = INVALID_REG_ADDR,
+ [BQ27XXX_REG_NAC] = 0x0c,
+ [BQ27XXX_REG_FCC] = 0x12,
+ [BQ27XXX_REG_CYCT] = 0x1e,
+ [BQ27XXX_REG_AE] = INVALID_REG_ADDR,
+ [BQ27XXX_REG_SOC] = 0x20,
+ [BQ27XXX_REG_DCAP] = 0x2e,
+ [BQ27XXX_REG_AP] = INVALID_REG_ADDR,
+ BQ27XXX_DM_REG_ROWS,
+ },
+ bq27520g1_regs[BQ27XXX_REG_MAX] = {
+ [BQ27XXX_REG_CTRL] = 0x00,
+ [BQ27XXX_REG_TEMP] = 0x06,
+ [BQ27XXX_REG_INT_TEMP] = INVALID_REG_ADDR,
+ [BQ27XXX_REG_VOLT] = 0x08,
+ [BQ27XXX_REG_AI] = 0x14,
+ [BQ27XXX_REG_FLAGS] = 0x0a,
+ [BQ27XXX_REG_TTE] = 0x16,
+ [BQ27XXX_REG_TTF] = 0x18,
+ [BQ27XXX_REG_TTES] = 0x1c,
+ [BQ27XXX_REG_TTECP] = 0x26,
+ [BQ27XXX_REG_NAC] = 0x0c,
+ [BQ27XXX_REG_FCC] = 0x12,
+ [BQ27XXX_REG_CYCT] = INVALID_REG_ADDR,
+ [BQ27XXX_REG_AE] = 0x22,
+ [BQ27XXX_REG_SOC] = 0x2c,
+ [BQ27XXX_REG_DCAP] = 0x3c,
+ [BQ27XXX_REG_AP] = 0x24,
+ BQ27XXX_DM_REG_ROWS,
+ },
+ bq27520g2_regs[BQ27XXX_REG_MAX] = {
+ [BQ27XXX_REG_CTRL] = 0x00,
+ [BQ27XXX_REG_TEMP] = 0x06,
+ [BQ27XXX_REG_INT_TEMP] = 0x36,
+ [BQ27XXX_REG_VOLT] = 0x08,
+ [BQ27XXX_REG_AI] = 0x14,
+ [BQ27XXX_REG_FLAGS] = 0x0a,
+ [BQ27XXX_REG_TTE] = 0x16,
+ [BQ27XXX_REG_TTF] = 0x18,
+ [BQ27XXX_REG_TTES] = 0x1c,
+ [BQ27XXX_REG_TTECP] = 0x26,
+ [BQ27XXX_REG_NAC] = 0x0c,
+ [BQ27XXX_REG_FCC] = 0x12,
+ [BQ27XXX_REG_CYCT] = 0x2a,
+ [BQ27XXX_REG_AE] = 0x22,
+ [BQ27XXX_REG_SOC] = 0x2c,
+ [BQ27XXX_REG_DCAP] = 0x3c,
+ [BQ27XXX_REG_AP] = 0x24,
+ BQ27XXX_DM_REG_ROWS,
+ },
+ bq27520g3_regs[BQ27XXX_REG_MAX] = {
+ [BQ27XXX_REG_CTRL] = 0x00,
+ [BQ27XXX_REG_TEMP] = 0x06,
+ [BQ27XXX_REG_INT_TEMP] = 0x36,
+ [BQ27XXX_REG_VOLT] = 0x08,
+ [BQ27XXX_REG_AI] = 0x14,
+ [BQ27XXX_REG_FLAGS] = 0x0a,
+ [BQ27XXX_REG_TTE] = 0x16,
+ [BQ27XXX_REG_TTF] = INVALID_REG_ADDR,
+ [BQ27XXX_REG_TTES] = 0x1c,
+ [BQ27XXX_REG_TTECP] = 0x26,
+ [BQ27XXX_REG_NAC] = 0x0c,
+ [BQ27XXX_REG_FCC] = 0x12,
+ [BQ27XXX_REG_CYCT] = 0x2a,
+ [BQ27XXX_REG_AE] = 0x22,
+ [BQ27XXX_REG_SOC] = 0x2c,
+ [BQ27XXX_REG_DCAP] = 0x3c,
+ [BQ27XXX_REG_AP] = 0x24,
+ BQ27XXX_DM_REG_ROWS,
+ },
+ bq27520g4_regs[BQ27XXX_REG_MAX] = {
+ [BQ27XXX_REG_CTRL] = 0x00,
+ [BQ27XXX_REG_TEMP] = 0x06,
+ [BQ27XXX_REG_INT_TEMP] = 0x28,
+ [BQ27XXX_REG_VOLT] = 0x08,
+ [BQ27XXX_REG_AI] = 0x14,
+ [BQ27XXX_REG_FLAGS] = 0x0a,
+ [BQ27XXX_REG_TTE] = 0x16,
+ [BQ27XXX_REG_TTF] = INVALID_REG_ADDR,
+ [BQ27XXX_REG_TTES] = 0x1c,
+ [BQ27XXX_REG_TTECP] = INVALID_REG_ADDR,
+ [BQ27XXX_REG_NAC] = 0x0c,
+ [BQ27XXX_REG_FCC] = 0x12,
+ [BQ27XXX_REG_CYCT] = 0x1e,
+ [BQ27XXX_REG_AE] = INVALID_REG_ADDR,
+ [BQ27XXX_REG_SOC] = 0x20,
+ [BQ27XXX_REG_DCAP] = INVALID_REG_ADDR,
+ [BQ27XXX_REG_AP] = INVALID_REG_ADDR,
+ BQ27XXX_DM_REG_ROWS,
+ },
+ bq27521_regs[BQ27XXX_REG_MAX] = {
+ [BQ27XXX_REG_CTRL] = 0x02,
+ [BQ27XXX_REG_TEMP] = 0x0a,
+ [BQ27XXX_REG_INT_TEMP] = INVALID_REG_ADDR,
+ [BQ27XXX_REG_VOLT] = 0x0c,
+ [BQ27XXX_REG_AI] = 0x0e,
+ [BQ27XXX_REG_FLAGS] = 0x08,
+ [BQ27XXX_REG_TTE] = INVALID_REG_ADDR,
+ [BQ27XXX_REG_TTF] = INVALID_REG_ADDR,
+ [BQ27XXX_REG_TTES] = INVALID_REG_ADDR,
+ [BQ27XXX_REG_TTECP] = INVALID_REG_ADDR,
+ [BQ27XXX_REG_NAC] = INVALID_REG_ADDR,
+ [BQ27XXX_REG_FCC] = INVALID_REG_ADDR,
+ [BQ27XXX_REG_CYCT] = INVALID_REG_ADDR,
+ [BQ27XXX_REG_AE] = INVALID_REG_ADDR,
+ [BQ27XXX_REG_SOC] = INVALID_REG_ADDR,
+ [BQ27XXX_REG_DCAP] = INVALID_REG_ADDR,
+ [BQ27XXX_REG_AP] = INVALID_REG_ADDR,
+ [BQ27XXX_DM_CTRL] = INVALID_REG_ADDR,
+ [BQ27XXX_DM_CLASS] = INVALID_REG_ADDR,
+ [BQ27XXX_DM_BLOCK] = INVALID_REG_ADDR,
+ [BQ27XXX_DM_DATA] = INVALID_REG_ADDR,
+ [BQ27XXX_DM_CKSUM] = INVALID_REG_ADDR,
+ },
+ bq27530_regs[BQ27XXX_REG_MAX] = {
+ [BQ27XXX_REG_CTRL] = 0x00,
+ [BQ27XXX_REG_TEMP] = 0x06,
+ [BQ27XXX_REG_INT_TEMP] = 0x32,
+ [BQ27XXX_REG_VOLT] = 0x08,
+ [BQ27XXX_REG_AI] = 0x14,
+ [BQ27XXX_REG_FLAGS] = 0x0a,
+ [BQ27XXX_REG_TTE] = 0x16,
+ [BQ27XXX_REG_TTF] = INVALID_REG_ADDR,
+ [BQ27XXX_REG_TTES] = INVALID_REG_ADDR,
+ [BQ27XXX_REG_TTECP] = INVALID_REG_ADDR,
+ [BQ27XXX_REG_NAC] = 0x0c,
+ [BQ27XXX_REG_FCC] = 0x12,
+ [BQ27XXX_REG_CYCT] = 0x2a,
+ [BQ27XXX_REG_AE] = INVALID_REG_ADDR,
+ [BQ27XXX_REG_SOC] = 0x2c,
+ [BQ27XXX_REG_DCAP] = INVALID_REG_ADDR,
+ [BQ27XXX_REG_AP] = 0x24,
+ BQ27XXX_DM_REG_ROWS,
+ },
+#define bq27531_regs bq27530_regs
+ bq27541_regs[BQ27XXX_REG_MAX] = {
+ [BQ27XXX_REG_CTRL] = 0x00,
+ [BQ27XXX_REG_TEMP] = 0x06,
+ [BQ27XXX_REG_INT_TEMP] = 0x28,
+ [BQ27XXX_REG_VOLT] = 0x08,
+ [BQ27XXX_REG_AI] = 0x14,
+ [BQ27XXX_REG_FLAGS] = 0x0a,
+ [BQ27XXX_REG_TTE] = 0x16,
+ [BQ27XXX_REG_TTF] = INVALID_REG_ADDR,
+ [BQ27XXX_REG_TTES] = INVALID_REG_ADDR,
+ [BQ27XXX_REG_TTECP] = INVALID_REG_ADDR,
+ [BQ27XXX_REG_NAC] = 0x0c,
+ [BQ27XXX_REG_FCC] = 0x12,
+ [BQ27XXX_REG_CYCT] = 0x2a,
+ [BQ27XXX_REG_AE] = INVALID_REG_ADDR,
+ [BQ27XXX_REG_SOC] = 0x2c,
+ [BQ27XXX_REG_DCAP] = 0x3c,
+ [BQ27XXX_REG_AP] = 0x24,
+ BQ27XXX_DM_REG_ROWS,
+ },
+#define bq27542_regs bq27541_regs
+#define bq27546_regs bq27541_regs
+#define bq27742_regs bq27541_regs
+ bq27545_regs[BQ27XXX_REG_MAX] = {
+ [BQ27XXX_REG_CTRL] = 0x00,
+ [BQ27XXX_REG_TEMP] = 0x06,
+ [BQ27XXX_REG_INT_TEMP] = 0x28,
+ [BQ27XXX_REG_VOLT] = 0x08,
+ [BQ27XXX_REG_AI] = 0x14,
+ [BQ27XXX_REG_FLAGS] = 0x0a,
+ [BQ27XXX_REG_TTE] = 0x16,
+ [BQ27XXX_REG_TTF] = INVALID_REG_ADDR,
+ [BQ27XXX_REG_TTES] = INVALID_REG_ADDR,
+ [BQ27XXX_REG_TTECP] = INVALID_REG_ADDR,
+ [BQ27XXX_REG_NAC] = 0x0c,
+ [BQ27XXX_REG_FCC] = 0x12,
+ [BQ27XXX_REG_CYCT] = 0x2a,
+ [BQ27XXX_REG_AE] = INVALID_REG_ADDR,
+ [BQ27XXX_REG_SOC] = 0x2c,
+ [BQ27XXX_REG_DCAP] = INVALID_REG_ADDR,
+ [BQ27XXX_REG_AP] = 0x24,
+ BQ27XXX_DM_REG_ROWS,
+ },
+ bq27421_regs[BQ27XXX_REG_MAX] = {
+ [BQ27XXX_REG_CTRL] = 0x00,
+ [BQ27XXX_REG_TEMP] = 0x02,
+ [BQ27XXX_REG_INT_TEMP] = 0x1e,
+ [BQ27XXX_REG_VOLT] = 0x04,
+ [BQ27XXX_REG_AI] = 0x10,
+ [BQ27XXX_REG_FLAGS] = 0x06,
+ [BQ27XXX_REG_TTE] = INVALID_REG_ADDR,
+ [BQ27XXX_REG_TTF] = INVALID_REG_ADDR,
+ [BQ27XXX_REG_TTES] = INVALID_REG_ADDR,
+ [BQ27XXX_REG_TTECP] = INVALID_REG_ADDR,
+ [BQ27XXX_REG_NAC] = 0x08,
+ [BQ27XXX_REG_FCC] = 0x0e,
+ [BQ27XXX_REG_CYCT] = INVALID_REG_ADDR,
+ [BQ27XXX_REG_AE] = INVALID_REG_ADDR,
+ [BQ27XXX_REG_SOC] = 0x1c,
+ [BQ27XXX_REG_DCAP] = 0x3c,
+ [BQ27XXX_REG_AP] = 0x18,
+ BQ27XXX_DM_REG_ROWS,
+ },
+#define bq27411_regs bq27421_regs
+#define bq27425_regs bq27421_regs
+#define bq27426_regs bq27421_regs
+#define bq27441_regs bq27421_regs
+#define bq27621_regs bq27421_regs
+ bq27z561_regs[BQ27XXX_REG_MAX] = {
+ [BQ27XXX_REG_CTRL] = 0x00,
+ [BQ27XXX_REG_TEMP] = 0x06,
+ [BQ27XXX_REG_INT_TEMP] = INVALID_REG_ADDR,
+ [BQ27XXX_REG_VOLT] = 0x08,
+ [BQ27XXX_REG_AI] = 0x14,
+ [BQ27XXX_REG_FLAGS] = 0x0a,
+ [BQ27XXX_REG_TTE] = 0x16,
+ [BQ27XXX_REG_TTF] = 0x18,
+ [BQ27XXX_REG_TTES] = INVALID_REG_ADDR,
+ [BQ27XXX_REG_TTECP] = INVALID_REG_ADDR,
+ [BQ27XXX_REG_NAC] = INVALID_REG_ADDR,
+ [BQ27XXX_REG_FCC] = 0x12,
+ [BQ27XXX_REG_CYCT] = 0x2a,
+ [BQ27XXX_REG_AE] = 0x22,
+ [BQ27XXX_REG_SOC] = 0x2c,
+ [BQ27XXX_REG_DCAP] = 0x3c,
+ [BQ27XXX_REG_AP] = 0x22,
+ BQ27XXX_DM_REG_ROWS,
+ },
+ bq28z610_regs[BQ27XXX_REG_MAX] = {
+ [BQ27XXX_REG_CTRL] = 0x00,
+ [BQ27XXX_REG_TEMP] = 0x06,
+ [BQ27XXX_REG_INT_TEMP] = INVALID_REG_ADDR,
+ [BQ27XXX_REG_VOLT] = 0x08,
+ [BQ27XXX_REG_AI] = 0x14,
+ [BQ27XXX_REG_FLAGS] = 0x0a,
+ [BQ27XXX_REG_TTE] = 0x16,
+ [BQ27XXX_REG_TTF] = 0x18,
+ [BQ27XXX_REG_TTES] = INVALID_REG_ADDR,
+ [BQ27XXX_REG_TTECP] = INVALID_REG_ADDR,
+ [BQ27XXX_REG_NAC] = INVALID_REG_ADDR,
+ [BQ27XXX_REG_FCC] = 0x12,
+ [BQ27XXX_REG_CYCT] = 0x2a,
+ [BQ27XXX_REG_AE] = 0x22,
+ [BQ27XXX_REG_SOC] = 0x2c,
+ [BQ27XXX_REG_DCAP] = 0x3c,
+ [BQ27XXX_REG_AP] = 0x22,
+ BQ27XXX_DM_REG_ROWS,
+ },
+ bq34z100_regs[BQ27XXX_REG_MAX] = {
+ [BQ27XXX_REG_CTRL] = 0x00,
+ [BQ27XXX_REG_TEMP] = 0x0c,
+ [BQ27XXX_REG_INT_TEMP] = 0x2a,
+ [BQ27XXX_REG_VOLT] = 0x08,
+ [BQ27XXX_REG_AI] = 0x0a,
+ [BQ27XXX_REG_FLAGS] = 0x0e,
+ [BQ27XXX_REG_TTE] = 0x18,
+ [BQ27XXX_REG_TTF] = 0x1a,
+ [BQ27XXX_REG_TTES] = 0x1e,
+ [BQ27XXX_REG_TTECP] = INVALID_REG_ADDR,
+ [BQ27XXX_REG_NAC] = INVALID_REG_ADDR,
+ [BQ27XXX_REG_FCC] = 0x06,
+ [BQ27XXX_REG_CYCT] = 0x2c,
+ [BQ27XXX_REG_AE] = 0x24,
+ [BQ27XXX_REG_SOC] = 0x02,
+ [BQ27XXX_REG_DCAP] = 0x3c,
+ [BQ27XXX_REG_AP] = 0x22,
+ BQ27XXX_DM_REG_ROWS,
+ };
+
+static enum power_supply_property bq27000_props[] = {
+ POWER_SUPPLY_PROP_STATUS,
+ POWER_SUPPLY_PROP_PRESENT,
+ POWER_SUPPLY_PROP_VOLTAGE_NOW,
+ POWER_SUPPLY_PROP_CURRENT_NOW,
+ POWER_SUPPLY_PROP_CAPACITY,
+ POWER_SUPPLY_PROP_CAPACITY_LEVEL,
+ POWER_SUPPLY_PROP_TEMP,
+ POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW,
+ POWER_SUPPLY_PROP_TIME_TO_EMPTY_AVG,
+ POWER_SUPPLY_PROP_TIME_TO_FULL_NOW,
+ POWER_SUPPLY_PROP_TECHNOLOGY,
+ POWER_SUPPLY_PROP_CHARGE_FULL,
+ POWER_SUPPLY_PROP_CHARGE_NOW,
+ POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN,
+ POWER_SUPPLY_PROP_CYCLE_COUNT,
+ POWER_SUPPLY_PROP_ENERGY_NOW,
+ POWER_SUPPLY_PROP_POWER_AVG,
+ POWER_SUPPLY_PROP_HEALTH,
+ POWER_SUPPLY_PROP_MANUFACTURER,
+};
+
+static enum power_supply_property bq27010_props[] = {
+ POWER_SUPPLY_PROP_STATUS,
+ POWER_SUPPLY_PROP_PRESENT,
+ POWER_SUPPLY_PROP_VOLTAGE_NOW,
+ POWER_SUPPLY_PROP_CURRENT_NOW,
+ POWER_SUPPLY_PROP_CAPACITY,
+ POWER_SUPPLY_PROP_CAPACITY_LEVEL,
+ POWER_SUPPLY_PROP_TEMP,
+ POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW,
+ POWER_SUPPLY_PROP_TIME_TO_EMPTY_AVG,
+ POWER_SUPPLY_PROP_TIME_TO_FULL_NOW,
+ POWER_SUPPLY_PROP_TECHNOLOGY,
+ POWER_SUPPLY_PROP_CHARGE_FULL,
+ POWER_SUPPLY_PROP_CHARGE_NOW,
+ POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN,
+ POWER_SUPPLY_PROP_CYCLE_COUNT,
+ POWER_SUPPLY_PROP_HEALTH,
+ POWER_SUPPLY_PROP_MANUFACTURER,
+};
+
+#define bq2750x_props bq27510g3_props
+#define bq2751x_props bq27510g3_props
+#define bq2752x_props bq27510g3_props
+
+static enum power_supply_property bq27500_props[] = {
+ POWER_SUPPLY_PROP_STATUS,
+ POWER_SUPPLY_PROP_PRESENT,
+ POWER_SUPPLY_PROP_VOLTAGE_NOW,
+ POWER_SUPPLY_PROP_CURRENT_NOW,
+ POWER_SUPPLY_PROP_CAPACITY,
+ POWER_SUPPLY_PROP_CAPACITY_LEVEL,
+ POWER_SUPPLY_PROP_TEMP,
+ POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW,
+ POWER_SUPPLY_PROP_TIME_TO_FULL_NOW,
+ POWER_SUPPLY_PROP_TECHNOLOGY,
+ POWER_SUPPLY_PROP_CHARGE_FULL,
+ POWER_SUPPLY_PROP_CHARGE_NOW,
+ POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN,
+ POWER_SUPPLY_PROP_CYCLE_COUNT,
+ POWER_SUPPLY_PROP_ENERGY_NOW,
+ POWER_SUPPLY_PROP_POWER_AVG,
+ POWER_SUPPLY_PROP_HEALTH,
+ POWER_SUPPLY_PROP_MANUFACTURER,
+};
+#define bq27510g1_props bq27500_props
+#define bq27510g2_props bq27500_props
+
+static enum power_supply_property bq27510g3_props[] = {
+ POWER_SUPPLY_PROP_STATUS,
+ POWER_SUPPLY_PROP_PRESENT,
+ POWER_SUPPLY_PROP_VOLTAGE_NOW,
+ POWER_SUPPLY_PROP_CURRENT_NOW,
+ POWER_SUPPLY_PROP_CAPACITY,
+ POWER_SUPPLY_PROP_CAPACITY_LEVEL,
+ POWER_SUPPLY_PROP_TEMP,
+ POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW,
+ POWER_SUPPLY_PROP_TECHNOLOGY,
+ POWER_SUPPLY_PROP_CHARGE_FULL,
+ POWER_SUPPLY_PROP_CHARGE_NOW,
+ POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN,
+ POWER_SUPPLY_PROP_CYCLE_COUNT,
+ POWER_SUPPLY_PROP_HEALTH,
+ POWER_SUPPLY_PROP_MANUFACTURER,
+};
+
+static enum power_supply_property bq27520g1_props[] = {
+ POWER_SUPPLY_PROP_STATUS,
+ POWER_SUPPLY_PROP_PRESENT,
+ POWER_SUPPLY_PROP_VOLTAGE_NOW,
+ POWER_SUPPLY_PROP_CURRENT_NOW,
+ POWER_SUPPLY_PROP_CAPACITY,
+ POWER_SUPPLY_PROP_CAPACITY_LEVEL,
+ POWER_SUPPLY_PROP_TEMP,
+ POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW,
+ POWER_SUPPLY_PROP_TIME_TO_FULL_NOW,
+ POWER_SUPPLY_PROP_TECHNOLOGY,
+ POWER_SUPPLY_PROP_CHARGE_FULL,
+ POWER_SUPPLY_PROP_CHARGE_NOW,
+ POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN,
+ POWER_SUPPLY_PROP_ENERGY_NOW,
+ POWER_SUPPLY_PROP_POWER_AVG,
+ POWER_SUPPLY_PROP_HEALTH,
+ POWER_SUPPLY_PROP_MANUFACTURER,
+};
+
+#define bq27520g2_props bq27500_props
+
+static enum power_supply_property bq27520g3_props[] = {
+ POWER_SUPPLY_PROP_STATUS,
+ POWER_SUPPLY_PROP_PRESENT,
+ POWER_SUPPLY_PROP_VOLTAGE_NOW,
+ POWER_SUPPLY_PROP_CURRENT_NOW,
+ POWER_SUPPLY_PROP_CAPACITY,
+ POWER_SUPPLY_PROP_CAPACITY_LEVEL,
+ POWER_SUPPLY_PROP_TEMP,
+ POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW,
+ POWER_SUPPLY_PROP_TECHNOLOGY,
+ POWER_SUPPLY_PROP_CHARGE_FULL,
+ POWER_SUPPLY_PROP_CHARGE_NOW,
+ POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN,
+ POWER_SUPPLY_PROP_CYCLE_COUNT,
+ POWER_SUPPLY_PROP_ENERGY_NOW,
+ POWER_SUPPLY_PROP_POWER_AVG,
+ POWER_SUPPLY_PROP_HEALTH,
+ POWER_SUPPLY_PROP_MANUFACTURER,
+};
+
+static enum power_supply_property bq27520g4_props[] = {
+ POWER_SUPPLY_PROP_STATUS,
+ POWER_SUPPLY_PROP_PRESENT,
+ POWER_SUPPLY_PROP_VOLTAGE_NOW,
+ POWER_SUPPLY_PROP_CURRENT_NOW,
+ POWER_SUPPLY_PROP_CAPACITY,
+ POWER_SUPPLY_PROP_CAPACITY_LEVEL,
+ POWER_SUPPLY_PROP_TEMP,
+ POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW,
+ POWER_SUPPLY_PROP_TECHNOLOGY,
+ POWER_SUPPLY_PROP_CHARGE_FULL,
+ POWER_SUPPLY_PROP_CHARGE_NOW,
+ POWER_SUPPLY_PROP_CYCLE_COUNT,
+ POWER_SUPPLY_PROP_HEALTH,
+ POWER_SUPPLY_PROP_MANUFACTURER,
+};
+
+static enum power_supply_property bq27521_props[] = {
+ POWER_SUPPLY_PROP_STATUS,
+ POWER_SUPPLY_PROP_PRESENT,
+ POWER_SUPPLY_PROP_VOLTAGE_NOW,
+ POWER_SUPPLY_PROP_CURRENT_NOW,
+ POWER_SUPPLY_PROP_TEMP,
+ POWER_SUPPLY_PROP_TECHNOLOGY,
+};
+
+static enum power_supply_property bq27530_props[] = {
+ POWER_SUPPLY_PROP_STATUS,
+ POWER_SUPPLY_PROP_PRESENT,
+ POWER_SUPPLY_PROP_VOLTAGE_NOW,
+ POWER_SUPPLY_PROP_CURRENT_NOW,
+ POWER_SUPPLY_PROP_CAPACITY,
+ POWER_SUPPLY_PROP_CAPACITY_LEVEL,
+ POWER_SUPPLY_PROP_TEMP,
+ POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW,
+ POWER_SUPPLY_PROP_TECHNOLOGY,
+ POWER_SUPPLY_PROP_CHARGE_FULL,
+ POWER_SUPPLY_PROP_CHARGE_NOW,
+ POWER_SUPPLY_PROP_POWER_AVG,
+ POWER_SUPPLY_PROP_HEALTH,
+ POWER_SUPPLY_PROP_CYCLE_COUNT,
+ POWER_SUPPLY_PROP_MANUFACTURER,
+};
+#define bq27531_props bq27530_props
+
+static enum power_supply_property bq27541_props[] = {
+ POWER_SUPPLY_PROP_STATUS,
+ POWER_SUPPLY_PROP_PRESENT,
+ POWER_SUPPLY_PROP_VOLTAGE_NOW,
+ POWER_SUPPLY_PROP_CURRENT_NOW,
+ POWER_SUPPLY_PROP_CAPACITY,
+ POWER_SUPPLY_PROP_CAPACITY_LEVEL,
+ POWER_SUPPLY_PROP_TEMP,
+ POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW,
+ POWER_SUPPLY_PROP_TECHNOLOGY,
+ POWER_SUPPLY_PROP_CHARGE_FULL,
+ POWER_SUPPLY_PROP_CHARGE_NOW,
+ POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN,
+ POWER_SUPPLY_PROP_CYCLE_COUNT,
+ POWER_SUPPLY_PROP_POWER_AVG,
+ POWER_SUPPLY_PROP_HEALTH,
+ POWER_SUPPLY_PROP_MANUFACTURER,
+};
+#define bq27542_props bq27541_props
+#define bq27546_props bq27541_props
+#define bq27742_props bq27541_props
+
+static enum power_supply_property bq27545_props[] = {
+ POWER_SUPPLY_PROP_STATUS,
+ POWER_SUPPLY_PROP_PRESENT,
+ POWER_SUPPLY_PROP_VOLTAGE_NOW,
+ POWER_SUPPLY_PROP_CURRENT_NOW,
+ POWER_SUPPLY_PROP_CAPACITY,
+ POWER_SUPPLY_PROP_CAPACITY_LEVEL,
+ POWER_SUPPLY_PROP_TEMP,
+ POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW,
+ POWER_SUPPLY_PROP_TECHNOLOGY,
+ POWER_SUPPLY_PROP_CHARGE_FULL,
+ POWER_SUPPLY_PROP_CHARGE_NOW,
+ POWER_SUPPLY_PROP_HEALTH,
+ POWER_SUPPLY_PROP_CYCLE_COUNT,
+ POWER_SUPPLY_PROP_POWER_AVG,
+ POWER_SUPPLY_PROP_MANUFACTURER,
+};
+
+static enum power_supply_property bq27421_props[] = {
+ POWER_SUPPLY_PROP_STATUS,
+ POWER_SUPPLY_PROP_PRESENT,
+ POWER_SUPPLY_PROP_VOLTAGE_NOW,
+ POWER_SUPPLY_PROP_CURRENT_NOW,
+ POWER_SUPPLY_PROP_CAPACITY,
+ POWER_SUPPLY_PROP_CAPACITY_LEVEL,
+ POWER_SUPPLY_PROP_TEMP,
+ POWER_SUPPLY_PROP_TECHNOLOGY,
+ POWER_SUPPLY_PROP_CHARGE_FULL,
+ POWER_SUPPLY_PROP_CHARGE_NOW,
+ POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN,
+ POWER_SUPPLY_PROP_MANUFACTURER,
+};
+#define bq27411_props bq27421_props
+#define bq27425_props bq27421_props
+#define bq27426_props bq27421_props
+#define bq27441_props bq27421_props
+#define bq27621_props bq27421_props
+
+static enum power_supply_property bq27z561_props[] = {
+ POWER_SUPPLY_PROP_STATUS,
+ POWER_SUPPLY_PROP_PRESENT,
+ POWER_SUPPLY_PROP_VOLTAGE_NOW,
+ POWER_SUPPLY_PROP_CURRENT_NOW,
+ POWER_SUPPLY_PROP_CAPACITY,
+ POWER_SUPPLY_PROP_CAPACITY_LEVEL,
+ POWER_SUPPLY_PROP_TEMP,
+ POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW,
+ POWER_SUPPLY_PROP_TIME_TO_FULL_NOW,
+ POWER_SUPPLY_PROP_TECHNOLOGY,
+ POWER_SUPPLY_PROP_CHARGE_FULL,
+ POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN,
+ POWER_SUPPLY_PROP_CYCLE_COUNT,
+ POWER_SUPPLY_PROP_POWER_AVG,
+ POWER_SUPPLY_PROP_HEALTH,
+ POWER_SUPPLY_PROP_MANUFACTURER,
+};
+
+static enum power_supply_property bq28z610_props[] = {
+ POWER_SUPPLY_PROP_STATUS,
+ POWER_SUPPLY_PROP_PRESENT,
+ POWER_SUPPLY_PROP_VOLTAGE_NOW,
+ POWER_SUPPLY_PROP_CURRENT_NOW,
+ POWER_SUPPLY_PROP_CAPACITY,
+ POWER_SUPPLY_PROP_CAPACITY_LEVEL,
+ POWER_SUPPLY_PROP_TEMP,
+ POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW,
+ POWER_SUPPLY_PROP_TIME_TO_FULL_NOW,
+ POWER_SUPPLY_PROP_TECHNOLOGY,
+ POWER_SUPPLY_PROP_CHARGE_FULL,
+ POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN,
+ POWER_SUPPLY_PROP_CYCLE_COUNT,
+ POWER_SUPPLY_PROP_POWER_AVG,
+ POWER_SUPPLY_PROP_HEALTH,
+ POWER_SUPPLY_PROP_MANUFACTURER,
+};
+
+static enum power_supply_property bq34z100_props[] = {
+ POWER_SUPPLY_PROP_STATUS,
+ POWER_SUPPLY_PROP_PRESENT,
+ POWER_SUPPLY_PROP_VOLTAGE_NOW,
+ POWER_SUPPLY_PROP_CURRENT_NOW,
+ POWER_SUPPLY_PROP_CAPACITY,
+ POWER_SUPPLY_PROP_CAPACITY_LEVEL,
+ POWER_SUPPLY_PROP_TEMP,
+ POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW,
+ POWER_SUPPLY_PROP_TIME_TO_EMPTY_AVG,
+ POWER_SUPPLY_PROP_TIME_TO_FULL_NOW,
+ POWER_SUPPLY_PROP_TECHNOLOGY,
+ POWER_SUPPLY_PROP_CHARGE_FULL,
+ POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN,
+ POWER_SUPPLY_PROP_CYCLE_COUNT,
+ POWER_SUPPLY_PROP_ENERGY_NOW,
+ POWER_SUPPLY_PROP_POWER_AVG,
+ POWER_SUPPLY_PROP_HEALTH,
+ POWER_SUPPLY_PROP_MANUFACTURER,
+};
+
+struct bq27xxx_dm_reg {
+ u8 subclass_id;
+ u8 offset;
+ u8 bytes;
+ u16 min, max;
+};
+
+enum bq27xxx_dm_reg_id {
+ BQ27XXX_DM_DESIGN_CAPACITY = 0,
+ BQ27XXX_DM_DESIGN_ENERGY,
+ BQ27XXX_DM_TERMINATE_VOLTAGE,
+};
+
+#define bq27000_dm_regs 0
+#define bq27010_dm_regs 0
+#define bq2750x_dm_regs 0
+#define bq2751x_dm_regs 0
+#define bq2752x_dm_regs 0
+
+#if 0 /* not yet tested */
+static struct bq27xxx_dm_reg bq27500_dm_regs[] = {
+ [BQ27XXX_DM_DESIGN_CAPACITY] = { 48, 10, 2, 0, 65535 },
+ [BQ27XXX_DM_DESIGN_ENERGY] = { }, /* missing on chip */
+ [BQ27XXX_DM_TERMINATE_VOLTAGE] = { 80, 48, 2, 1000, 32767 },
+};
+#else
+#define bq27500_dm_regs 0
+#endif
+
+/* todo create data memory definitions from datasheets and test on chips */
+#define bq27510g1_dm_regs 0
+#define bq27510g2_dm_regs 0
+#define bq27510g3_dm_regs 0
+#define bq27520g1_dm_regs 0
+#define bq27520g2_dm_regs 0
+#define bq27520g3_dm_regs 0
+#define bq27520g4_dm_regs 0
+#define bq27521_dm_regs 0
+#define bq27530_dm_regs 0
+#define bq27531_dm_regs 0
+#define bq27541_dm_regs 0
+#define bq27542_dm_regs 0
+#define bq27546_dm_regs 0
+#define bq27742_dm_regs 0
+
+#if 0 /* not yet tested */
+static struct bq27xxx_dm_reg bq27545_dm_regs[] = {
+ [BQ27XXX_DM_DESIGN_CAPACITY] = { 48, 23, 2, 0, 32767 },
+ [BQ27XXX_DM_DESIGN_ENERGY] = { 48, 25, 2, 0, 32767 },
+ [BQ27XXX_DM_TERMINATE_VOLTAGE] = { 80, 67, 2, 2800, 3700 },
+};
+#else
+#define bq27545_dm_regs 0
+#endif
+
+static struct bq27xxx_dm_reg bq27411_dm_regs[] = {
+ [BQ27XXX_DM_DESIGN_CAPACITY] = { 82, 10, 2, 0, 32767 },
+ [BQ27XXX_DM_DESIGN_ENERGY] = { 82, 12, 2, 0, 32767 },
+ [BQ27XXX_DM_TERMINATE_VOLTAGE] = { 82, 16, 2, 2800, 3700 },
+};
+
+static struct bq27xxx_dm_reg bq27421_dm_regs[] = {
+ [BQ27XXX_DM_DESIGN_CAPACITY] = { 82, 10, 2, 0, 8000 },
+ [BQ27XXX_DM_DESIGN_ENERGY] = { 82, 12, 2, 0, 32767 },
+ [BQ27XXX_DM_TERMINATE_VOLTAGE] = { 82, 16, 2, 2500, 3700 },
+};
+
+static struct bq27xxx_dm_reg bq27425_dm_regs[] = {
+ [BQ27XXX_DM_DESIGN_CAPACITY] = { 82, 12, 2, 0, 32767 },
+ [BQ27XXX_DM_DESIGN_ENERGY] = { 82, 14, 2, 0, 32767 },
+ [BQ27XXX_DM_TERMINATE_VOLTAGE] = { 82, 18, 2, 2800, 3700 },
+};
+
+static struct bq27xxx_dm_reg bq27426_dm_regs[] = {
+ [BQ27XXX_DM_DESIGN_CAPACITY] = { 82, 6, 2, 0, 8000 },
+ [BQ27XXX_DM_DESIGN_ENERGY] = { 82, 8, 2, 0, 32767 },
+ [BQ27XXX_DM_TERMINATE_VOLTAGE] = { 82, 10, 2, 2500, 3700 },
+};
+
+#if 0 /* not yet tested */
+#define bq27441_dm_regs bq27421_dm_regs
+#else
+#define bq27441_dm_regs 0
+#endif
+
+#if 0 /* not yet tested */
+static struct bq27xxx_dm_reg bq27621_dm_regs[] = {
+ [BQ27XXX_DM_DESIGN_CAPACITY] = { 82, 3, 2, 0, 8000 },
+ [BQ27XXX_DM_DESIGN_ENERGY] = { 82, 5, 2, 0, 32767 },
+ [BQ27XXX_DM_TERMINATE_VOLTAGE] = { 82, 9, 2, 2500, 3700 },
+};
+#else
+#define bq27621_dm_regs 0
+#endif
+
+#define bq27z561_dm_regs 0
+#define bq28z610_dm_regs 0
+#define bq34z100_dm_regs 0
+
+#define BQ27XXX_O_ZERO BIT(0)
+#define BQ27XXX_O_OTDC BIT(1) /* has OTC/OTD overtemperature flags */
+#define BQ27XXX_O_UTOT BIT(2) /* has OT overtemperature flag */
+#define BQ27XXX_O_CFGUP BIT(3)
+#define BQ27XXX_O_RAM BIT(4)
+#define BQ27Z561_O_BITS BIT(5)
+#define BQ27XXX_O_SOC_SI BIT(6) /* SoC is single register */
+#define BQ27XXX_O_HAS_CI BIT(7) /* has Capacity Inaccurate flag */
+#define BQ27XXX_O_MUL_CHEM BIT(8) /* multiple chemistries supported */
+
+#define BQ27XXX_DATA(ref, key, opt) { \
+ .opts = (opt), \
+ .unseal_key = key, \
+ .regs = ref##_regs, \
+ .dm_regs = ref##_dm_regs, \
+ .props = ref##_props, \
+ .props_size = ARRAY_SIZE(ref##_props) }
+
+static struct {
+ u32 opts;
+ u32 unseal_key;
+ u8 *regs;
+ struct bq27xxx_dm_reg *dm_regs;
+ enum power_supply_property *props;
+ size_t props_size;
+} bq27xxx_chip_data[] = {
+ [BQ27000] = BQ27XXX_DATA(bq27000, 0 , BQ27XXX_O_ZERO | BQ27XXX_O_SOC_SI | BQ27XXX_O_HAS_CI),
+ [BQ27010] = BQ27XXX_DATA(bq27010, 0 , BQ27XXX_O_ZERO | BQ27XXX_O_SOC_SI | BQ27XXX_O_HAS_CI),
+ [BQ2750X] = BQ27XXX_DATA(bq2750x, 0 , BQ27XXX_O_OTDC),
+ [BQ2751X] = BQ27XXX_DATA(bq2751x, 0 , BQ27XXX_O_OTDC),
+ [BQ2752X] = BQ27XXX_DATA(bq2752x, 0 , BQ27XXX_O_OTDC),
+ [BQ27500] = BQ27XXX_DATA(bq27500, 0x04143672, BQ27XXX_O_OTDC),
+ [BQ27510G1] = BQ27XXX_DATA(bq27510g1, 0 , BQ27XXX_O_OTDC),
+ [BQ27510G2] = BQ27XXX_DATA(bq27510g2, 0 , BQ27XXX_O_OTDC),
+ [BQ27510G3] = BQ27XXX_DATA(bq27510g3, 0 , BQ27XXX_O_OTDC),
+ [BQ27520G1] = BQ27XXX_DATA(bq27520g1, 0 , BQ27XXX_O_OTDC),
+ [BQ27520G2] = BQ27XXX_DATA(bq27520g2, 0 , BQ27XXX_O_OTDC),
+ [BQ27520G3] = BQ27XXX_DATA(bq27520g3, 0 , BQ27XXX_O_OTDC),
+ [BQ27520G4] = BQ27XXX_DATA(bq27520g4, 0 , BQ27XXX_O_OTDC),
+ [BQ27521] = BQ27XXX_DATA(bq27521, 0 , 0),
+ [BQ27530] = BQ27XXX_DATA(bq27530, 0 , BQ27XXX_O_UTOT),
+ [BQ27531] = BQ27XXX_DATA(bq27531, 0 , BQ27XXX_O_UTOT),
+ [BQ27541] = BQ27XXX_DATA(bq27541, 0 , BQ27XXX_O_OTDC),
+ [BQ27542] = BQ27XXX_DATA(bq27542, 0 , BQ27XXX_O_OTDC),
+ [BQ27546] = BQ27XXX_DATA(bq27546, 0 , BQ27XXX_O_OTDC),
+ [BQ27742] = BQ27XXX_DATA(bq27742, 0 , BQ27XXX_O_OTDC),
+ [BQ27545] = BQ27XXX_DATA(bq27545, 0x04143672, BQ27XXX_O_OTDC),
+ [BQ27411] = BQ27XXX_DATA(bq27411, 0x80008000, BQ27XXX_O_UTOT | BQ27XXX_O_CFGUP | BQ27XXX_O_RAM),
+ [BQ27421] = BQ27XXX_DATA(bq27421, 0x80008000, BQ27XXX_O_UTOT | BQ27XXX_O_CFGUP | BQ27XXX_O_RAM),
+ [BQ27425] = BQ27XXX_DATA(bq27425, 0x04143672, BQ27XXX_O_UTOT | BQ27XXX_O_CFGUP),
+ [BQ27426] = BQ27XXX_DATA(bq27426, 0x80008000, BQ27XXX_O_UTOT | BQ27XXX_O_CFGUP | BQ27XXX_O_RAM),
+ [BQ27441] = BQ27XXX_DATA(bq27441, 0x80008000, BQ27XXX_O_UTOT | BQ27XXX_O_CFGUP | BQ27XXX_O_RAM),
+ [BQ27621] = BQ27XXX_DATA(bq27621, 0x80008000, BQ27XXX_O_UTOT | BQ27XXX_O_CFGUP | BQ27XXX_O_RAM),
+ [BQ27Z561] = BQ27XXX_DATA(bq27z561, 0 , BQ27Z561_O_BITS),
+ [BQ28Z610] = BQ27XXX_DATA(bq28z610, 0 , BQ27Z561_O_BITS),
+ [BQ34Z100] = BQ27XXX_DATA(bq34z100, 0 , BQ27XXX_O_OTDC | BQ27XXX_O_SOC_SI | \
+ BQ27XXX_O_HAS_CI | BQ27XXX_O_MUL_CHEM),
+};
+
+static DEFINE_MUTEX(bq27xxx_list_lock);
+static LIST_HEAD(bq27xxx_battery_devices);
+
+#define BQ27XXX_MSLEEP(i) usleep_range((i)*1000, (i)*1000+500)
+
+#define BQ27XXX_DM_SZ 32
+
+/**
+ * struct bq27xxx_dm_buf - chip data memory buffer
+ * @class: data memory subclass_id
+ * @block: data memory block number
+ * @data: data from/for the block
+ * @has_data: true if data has been filled by read
+ * @dirty: true if data has changed since last read/write
+ *
+ * Encapsulates info required to manage chip data memory blocks.
+ */
+struct bq27xxx_dm_buf {
+ u8 class;
+ u8 block;
+ u8 data[BQ27XXX_DM_SZ];
+ bool has_data, dirty;
+};
+
+#define BQ27XXX_DM_BUF(di, i) { \
+ .class = (di)->dm_regs[i].subclass_id, \
+ .block = (di)->dm_regs[i].offset / BQ27XXX_DM_SZ, \
+}
+
+static inline u16 *bq27xxx_dm_reg_ptr(struct bq27xxx_dm_buf *buf,
+ struct bq27xxx_dm_reg *reg)
+{
+ if (buf->class == reg->subclass_id &&
+ buf->block == reg->offset / BQ27XXX_DM_SZ)
+ return (u16 *) (buf->data + reg->offset % BQ27XXX_DM_SZ);
+
+ return NULL;
+}
+
+static const char * const bq27xxx_dm_reg_name[] = {
+ [BQ27XXX_DM_DESIGN_CAPACITY] = "design-capacity",
+ [BQ27XXX_DM_DESIGN_ENERGY] = "design-energy",
+ [BQ27XXX_DM_TERMINATE_VOLTAGE] = "terminate-voltage",
+};
+
+
+static bool bq27xxx_dt_to_nvm = true;
+module_param_named(dt_monitored_battery_updates_nvm, bq27xxx_dt_to_nvm, bool, 0444);
+MODULE_PARM_DESC(dt_monitored_battery_updates_nvm,
+ "Devicetree monitored-battery config updates data memory on NVM/flash chips.\n"
+ "Users must set this =0 when installing a different type of battery!\n"
+ "Default is =1."
+#ifndef CONFIG_BATTERY_BQ27XXX_DT_UPDATES_NVM
+ "\nSetting this affects future kernel updates, not the current configuration."
+#endif
+);
+
+static int poll_interval_param_set(const char *val, const struct kernel_param *kp)
+{
+ struct bq27xxx_device_info *di;
+ unsigned int prev_val = *(unsigned int *) kp->arg;
+ int ret;
+
+ ret = param_set_uint(val, kp);
+ if (ret < 0 || prev_val == *(unsigned int *) kp->arg)
+ return ret;
+
+ mutex_lock(&bq27xxx_list_lock);
+ list_for_each_entry(di, &bq27xxx_battery_devices, list)
+ mod_delayed_work(system_wq, &di->work, 0);
+ mutex_unlock(&bq27xxx_list_lock);
+
+ return ret;
+}
+
+static const struct kernel_param_ops param_ops_poll_interval = {
+ .get = param_get_uint,
+ .set = poll_interval_param_set,
+};
+
+static unsigned int poll_interval = 360;
+module_param_cb(poll_interval, &param_ops_poll_interval, &poll_interval, 0644);
+MODULE_PARM_DESC(poll_interval,
+ "battery poll interval in seconds - 0 disables polling");
+
+/*
+ * Common code for BQ27xxx devices
+ */
+
+static inline int bq27xxx_read(struct bq27xxx_device_info *di, int reg_index,
+ bool single)
+{
+ int ret;
+
+ if (!di || di->regs[reg_index] == INVALID_REG_ADDR)
+ return -EINVAL;
+
+ ret = di->bus.read(di, di->regs[reg_index], single);
+ if (ret < 0)
+ dev_dbg(di->dev, "failed to read register 0x%02x (index %d)\n",
+ di->regs[reg_index], reg_index);
+
+ return ret;
+}
+
+static inline int bq27xxx_write(struct bq27xxx_device_info *di, int reg_index,
+ u16 value, bool single)
+{
+ int ret;
+
+ if (!di || di->regs[reg_index] == INVALID_REG_ADDR)
+ return -EINVAL;
+
+ if (!di->bus.write)
+ return -EPERM;
+
+ ret = di->bus.write(di, di->regs[reg_index], value, single);
+ if (ret < 0)
+ dev_dbg(di->dev, "failed to write register 0x%02x (index %d)\n",
+ di->regs[reg_index], reg_index);
+
+ return ret;
+}
+
+static inline int bq27xxx_read_block(struct bq27xxx_device_info *di, int reg_index,
+ u8 *data, int len)
+{
+ int ret;
+
+ if (!di || di->regs[reg_index] == INVALID_REG_ADDR)
+ return -EINVAL;
+
+ if (!di->bus.read_bulk)
+ return -EPERM;
+
+ ret = di->bus.read_bulk(di, di->regs[reg_index], data, len);
+ if (ret < 0)
+ dev_dbg(di->dev, "failed to read_bulk register 0x%02x (index %d)\n",
+ di->regs[reg_index], reg_index);
+
+ return ret;
+}
+
+static inline int bq27xxx_write_block(struct bq27xxx_device_info *di, int reg_index,
+ u8 *data, int len)
+{
+ int ret;
+
+ if (!di || di->regs[reg_index] == INVALID_REG_ADDR)
+ return -EINVAL;
+
+ if (!di->bus.write_bulk)
+ return -EPERM;
+
+ ret = di->bus.write_bulk(di, di->regs[reg_index], data, len);
+ if (ret < 0)
+ dev_dbg(di->dev, "failed to write_bulk register 0x%02x (index %d)\n",
+ di->regs[reg_index], reg_index);
+
+ return ret;
+}
+
+static int bq27xxx_battery_seal(struct bq27xxx_device_info *di)
+{
+ int ret;
+
+ ret = bq27xxx_write(di, BQ27XXX_REG_CTRL, BQ27XXX_SEALED, false);
+ if (ret < 0) {
+ dev_err(di->dev, "bus error on seal: %d\n", ret);
+ return ret;
+ }
+
+ return 0;
+}
+
+static int bq27xxx_battery_unseal(struct bq27xxx_device_info *di)
+{
+ int ret;
+
+ if (di->unseal_key == 0) {
+ dev_err(di->dev, "unseal failed due to missing key\n");
+ return -EINVAL;
+ }
+
+ ret = bq27xxx_write(di, BQ27XXX_REG_CTRL, (u16)(di->unseal_key >> 16), false);
+ if (ret < 0)
+ goto out;
+
+ ret = bq27xxx_write(di, BQ27XXX_REG_CTRL, (u16)di->unseal_key, false);
+ if (ret < 0)
+ goto out;
+
+ return 0;
+
+out:
+ dev_err(di->dev, "bus error on unseal: %d\n", ret);
+ return ret;
+}
+
+static u8 bq27xxx_battery_checksum_dm_block(struct bq27xxx_dm_buf *buf)
+{
+ u16 sum = 0;
+ int i;
+
+ for (i = 0; i < BQ27XXX_DM_SZ; i++)
+ sum += buf->data[i];
+ sum &= 0xff;
+
+ return 0xff - sum;
+}
+
+static int bq27xxx_battery_read_dm_block(struct bq27xxx_device_info *di,
+ struct bq27xxx_dm_buf *buf)
+{
+ int ret;
+
+ buf->has_data = false;
+
+ ret = bq27xxx_write(di, BQ27XXX_DM_CLASS, buf->class, true);
+ if (ret < 0)
+ goto out;
+
+ ret = bq27xxx_write(di, BQ27XXX_DM_BLOCK, buf->block, true);
+ if (ret < 0)
+ goto out;
+
+ BQ27XXX_MSLEEP(1);
+
+ ret = bq27xxx_read_block(di, BQ27XXX_DM_DATA, buf->data, BQ27XXX_DM_SZ);
+ if (ret < 0)
+ goto out;
+
+ ret = bq27xxx_read(di, BQ27XXX_DM_CKSUM, true);
+ if (ret < 0)
+ goto out;
+
+ if ((u8)ret != bq27xxx_battery_checksum_dm_block(buf)) {
+ ret = -EINVAL;
+ goto out;
+ }
+
+ buf->has_data = true;
+ buf->dirty = false;
+
+ return 0;
+
+out:
+ dev_err(di->dev, "bus error reading chip memory: %d\n", ret);
+ return ret;
+}
+
+static void bq27xxx_battery_update_dm_block(struct bq27xxx_device_info *di,
+ struct bq27xxx_dm_buf *buf,
+ enum bq27xxx_dm_reg_id reg_id,
+ unsigned int val)
+{
+ struct bq27xxx_dm_reg *reg = &di->dm_regs[reg_id];
+ const char *str = bq27xxx_dm_reg_name[reg_id];
+ u16 *prev = bq27xxx_dm_reg_ptr(buf, reg);
+
+ if (prev == NULL) {
+ dev_warn(di->dev, "buffer does not match %s dm spec\n", str);
+ return;
+ }
+
+ if (reg->bytes != 2) {
+ dev_warn(di->dev, "%s dm spec has unsupported byte size\n", str);
+ return;
+ }
+
+ if (!buf->has_data)
+ return;
+
+ if (be16_to_cpup(prev) == val) {
+ dev_info(di->dev, "%s has %u\n", str, val);
+ return;
+ }
+
+#ifdef CONFIG_BATTERY_BQ27XXX_DT_UPDATES_NVM
+ if (!(di->opts & BQ27XXX_O_RAM) && !bq27xxx_dt_to_nvm) {
+#else
+ if (!(di->opts & BQ27XXX_O_RAM)) {
+#endif
+ /* devicetree and NVM differ; defer to NVM */
+ dev_warn(di->dev, "%s has %u; update to %u disallowed "
+#ifdef CONFIG_BATTERY_BQ27XXX_DT_UPDATES_NVM
+ "by dt_monitored_battery_updates_nvm=0"
+#else
+ "for flash/NVM data memory"
+#endif
+ "\n", str, be16_to_cpup(prev), val);
+ return;
+ }
+
+ dev_info(di->dev, "update %s to %u\n", str, val);
+
+ *prev = cpu_to_be16(val);
+ buf->dirty = true;
+}
+
+static int bq27xxx_battery_cfgupdate_priv(struct bq27xxx_device_info *di, bool active)
+{
+ const int limit = 100;
+ u16 cmd = active ? BQ27XXX_SET_CFGUPDATE : BQ27XXX_SOFT_RESET;
+ int ret, try = limit;
+
+ ret = bq27xxx_write(di, BQ27XXX_REG_CTRL, cmd, false);
+ if (ret < 0)
+ return ret;
+
+ do {
+ BQ27XXX_MSLEEP(25);
+ ret = bq27xxx_read(di, BQ27XXX_REG_FLAGS, false);
+ if (ret < 0)
+ return ret;
+ } while (!!(ret & BQ27XXX_FLAG_CFGUP) != active && --try);
+
+ if (!try && di->chip != BQ27425) { // 425 has a bug
+ dev_err(di->dev, "timed out waiting for cfgupdate flag %d\n", active);
+ return -EINVAL;
+ }
+
+ if (limit - try > 3)
+ dev_warn(di->dev, "cfgupdate %d, retries %d\n", active, limit - try);
+
+ return 0;
+}
+
+static inline int bq27xxx_battery_set_cfgupdate(struct bq27xxx_device_info *di)
+{
+ int ret = bq27xxx_battery_cfgupdate_priv(di, true);
+ if (ret < 0 && ret != -EINVAL)
+ dev_err(di->dev, "bus error on set_cfgupdate: %d\n", ret);
+
+ return ret;
+}
+
+static inline int bq27xxx_battery_soft_reset(struct bq27xxx_device_info *di)
+{
+ int ret = bq27xxx_battery_cfgupdate_priv(di, false);
+ if (ret < 0 && ret != -EINVAL)
+ dev_err(di->dev, "bus error on soft_reset: %d\n", ret);
+
+ return ret;
+}
+
+static int bq27xxx_battery_write_dm_block(struct bq27xxx_device_info *di,
+ struct bq27xxx_dm_buf *buf)
+{
+ bool cfgup = di->opts & BQ27XXX_O_CFGUP;
+ int ret;
+
+ if (!buf->dirty)
+ return 0;
+
+ if (cfgup) {
+ ret = bq27xxx_battery_set_cfgupdate(di);
+ if (ret < 0)
+ return ret;
+ }
+
+ ret = bq27xxx_write(di, BQ27XXX_DM_CTRL, 0, true);
+ if (ret < 0)
+ goto out;
+
+ ret = bq27xxx_write(di, BQ27XXX_DM_CLASS, buf->class, true);
+ if (ret < 0)
+ goto out;
+
+ ret = bq27xxx_write(di, BQ27XXX_DM_BLOCK, buf->block, true);
+ if (ret < 0)
+ goto out;
+
+ BQ27XXX_MSLEEP(1);
+
+ ret = bq27xxx_write_block(di, BQ27XXX_DM_DATA, buf->data, BQ27XXX_DM_SZ);
+ if (ret < 0)
+ goto out;
+
+ ret = bq27xxx_write(di, BQ27XXX_DM_CKSUM,
+ bq27xxx_battery_checksum_dm_block(buf), true);
+ if (ret < 0)
+ goto out;
+
+ /* DO NOT read BQ27XXX_DM_CKSUM here to verify it! That may cause NVM
+ * corruption on the '425 chip (and perhaps others), which can damage
+ * the chip.
+ */
+
+ if (cfgup) {
+ BQ27XXX_MSLEEP(1);
+ ret = bq27xxx_battery_soft_reset(di);
+ if (ret < 0)
+ return ret;
+ } else {
+ BQ27XXX_MSLEEP(100); /* flash DM updates in <100ms */
+ }
+
+ buf->dirty = false;
+
+ return 0;
+
+out:
+ if (cfgup)
+ bq27xxx_battery_soft_reset(di);
+
+ dev_err(di->dev, "bus error writing chip memory: %d\n", ret);
+ return ret;
+}
+
+static void bq27xxx_battery_set_config(struct bq27xxx_device_info *di,
+ struct power_supply_battery_info *info)
+{
+ struct bq27xxx_dm_buf bd = BQ27XXX_DM_BUF(di, BQ27XXX_DM_DESIGN_CAPACITY);
+ struct bq27xxx_dm_buf bt = BQ27XXX_DM_BUF(di, BQ27XXX_DM_TERMINATE_VOLTAGE);
+ bool updated;
+
+ if (bq27xxx_battery_unseal(di) < 0)
+ return;
+
+ if (info->charge_full_design_uah != -EINVAL &&
+ info->energy_full_design_uwh != -EINVAL) {
+ bq27xxx_battery_read_dm_block(di, &bd);
+ /* assume design energy & capacity are in same block */
+ bq27xxx_battery_update_dm_block(di, &bd,
+ BQ27XXX_DM_DESIGN_CAPACITY,
+ info->charge_full_design_uah / 1000);
+ bq27xxx_battery_update_dm_block(di, &bd,
+ BQ27XXX_DM_DESIGN_ENERGY,
+ info->energy_full_design_uwh / 1000);
+ }
+
+ if (info->voltage_min_design_uv != -EINVAL) {
+ bool same = bd.class == bt.class && bd.block == bt.block;
+ if (!same)
+ bq27xxx_battery_read_dm_block(di, &bt);
+ bq27xxx_battery_update_dm_block(di, same ? &bd : &bt,
+ BQ27XXX_DM_TERMINATE_VOLTAGE,
+ info->voltage_min_design_uv / 1000);
+ }
+
+ updated = bd.dirty || bt.dirty;
+
+ bq27xxx_battery_write_dm_block(di, &bd);
+ bq27xxx_battery_write_dm_block(di, &bt);
+
+ bq27xxx_battery_seal(di);
+
+ if (updated && !(di->opts & BQ27XXX_O_CFGUP)) {
+ bq27xxx_write(di, BQ27XXX_REG_CTRL, BQ27XXX_RESET, false);
+ BQ27XXX_MSLEEP(300); /* reset time is not documented */
+ }
+ /* assume bq27xxx_battery_update() is called hereafter */
+}
+
+static void bq27xxx_battery_settings(struct bq27xxx_device_info *di)
+{
+ struct power_supply_battery_info info = {};
+ unsigned int min, max;
+
+ if (power_supply_get_battery_info(di->bat, &info) < 0)
+ return;
+
+ if (!di->dm_regs) {
+ dev_warn(di->dev, "data memory update not supported for chip\n");
+ return;
+ }
+
+ if (info.energy_full_design_uwh != info.charge_full_design_uah) {
+ if (info.energy_full_design_uwh == -EINVAL)
+ dev_warn(di->dev, "missing battery:energy-full-design-microwatt-hours\n");
+ else if (info.charge_full_design_uah == -EINVAL)
+ dev_warn(di->dev, "missing battery:charge-full-design-microamp-hours\n");
+ }
+
+ /* assume min == 0 */
+ max = di->dm_regs[BQ27XXX_DM_DESIGN_ENERGY].max;
+ if (info.energy_full_design_uwh > max * 1000) {
+ dev_err(di->dev, "invalid battery:energy-full-design-microwatt-hours %d\n",
+ info.energy_full_design_uwh);
+ info.energy_full_design_uwh = -EINVAL;
+ }
+
+ /* assume min == 0 */
+ max = di->dm_regs[BQ27XXX_DM_DESIGN_CAPACITY].max;
+ if (info.charge_full_design_uah > max * 1000) {
+ dev_err(di->dev, "invalid battery:charge-full-design-microamp-hours %d\n",
+ info.charge_full_design_uah);
+ info.charge_full_design_uah = -EINVAL;
+ }
+
+ min = di->dm_regs[BQ27XXX_DM_TERMINATE_VOLTAGE].min;
+ max = di->dm_regs[BQ27XXX_DM_TERMINATE_VOLTAGE].max;
+ if ((info.voltage_min_design_uv < min * 1000 ||
+ info.voltage_min_design_uv > max * 1000) &&
+ info.voltage_min_design_uv != -EINVAL) {
+ dev_err(di->dev, "invalid battery:voltage-min-design-microvolt %d\n",
+ info.voltage_min_design_uv);
+ info.voltage_min_design_uv = -EINVAL;
+ }
+
+ if ((info.energy_full_design_uwh != -EINVAL &&
+ info.charge_full_design_uah != -EINVAL) ||
+ info.voltage_min_design_uv != -EINVAL)
+ bq27xxx_battery_set_config(di, &info);
+}
+
+/*
+ * Return the battery State-of-Charge
+ * Or < 0 if something fails.
+ */
+static int bq27xxx_battery_read_soc(struct bq27xxx_device_info *di)
+{
+ int soc;
+
+ if (di->opts & BQ27XXX_O_SOC_SI)
+ soc = bq27xxx_read(di, BQ27XXX_REG_SOC, true);
+ else
+ soc = bq27xxx_read(di, BQ27XXX_REG_SOC, false);
+
+ if (soc < 0)
+ dev_dbg(di->dev, "error reading State-of-Charge\n");
+
+ return soc;
+}
+
+/*
+ * Return a battery charge value in µAh
+ * Or < 0 if something fails.
+ */
+static int bq27xxx_battery_read_charge(struct bq27xxx_device_info *di, u8 reg)
+{
+ int charge;
+
+ charge = bq27xxx_read(di, reg, false);
+ if (charge < 0) {
+ dev_dbg(di->dev, "error reading charge register %02x: %d\n",
+ reg, charge);
+ return charge;
+ }
+
+ if (di->opts & BQ27XXX_O_ZERO)
+ charge *= BQ27XXX_CURRENT_CONSTANT / BQ27XXX_RS;
+ else
+ charge *= 1000;
+
+ return charge;
+}
+
+/*
+ * Return the battery Nominal available capacity in µAh
+ * Or < 0 if something fails.
+ */
+static inline int bq27xxx_battery_read_nac(struct bq27xxx_device_info *di)
+{
+ return bq27xxx_battery_read_charge(di, BQ27XXX_REG_NAC);
+}
+
+/*
+ * Return the battery Full Charge Capacity in µAh
+ * Or < 0 if something fails.
+ */
+static inline int bq27xxx_battery_read_fcc(struct bq27xxx_device_info *di)
+{
+ return bq27xxx_battery_read_charge(di, BQ27XXX_REG_FCC);
+}
+
+/*
+ * Return the Design Capacity in µAh
+ * Or < 0 if something fails.
+ */
+static int bq27xxx_battery_read_dcap(struct bq27xxx_device_info *di)
+{
+ int dcap;
+
+ if (di->opts & BQ27XXX_O_ZERO)
+ dcap = bq27xxx_read(di, BQ27XXX_REG_DCAP, true);
+ else
+ dcap = bq27xxx_read(di, BQ27XXX_REG_DCAP, false);
+
+ if (dcap < 0) {
+ dev_dbg(di->dev, "error reading initial last measured discharge\n");
+ return dcap;
+ }
+
+ if (di->opts & BQ27XXX_O_ZERO)
+ dcap = (dcap << 8) * BQ27XXX_CURRENT_CONSTANT / BQ27XXX_RS;
+ else
+ dcap *= 1000;
+
+ return dcap;
+}
+
+/*
+ * Return the battery Available energy in µWh
+ * Or < 0 if something fails.
+ */
+static int bq27xxx_battery_read_energy(struct bq27xxx_device_info *di)
+{
+ int ae;
+
+ ae = bq27xxx_read(di, BQ27XXX_REG_AE, false);
+ if (ae < 0) {
+ dev_dbg(di->dev, "error reading available energy\n");
+ return ae;
+ }
+
+ if (di->opts & BQ27XXX_O_ZERO)
+ ae *= BQ27XXX_POWER_CONSTANT / BQ27XXX_RS;
+ else
+ ae *= 1000;
+
+ return ae;
+}
+
+/*
+ * Return the battery temperature in tenths of degree Kelvin
+ * Or < 0 if something fails.
+ */
+static int bq27xxx_battery_read_temperature(struct bq27xxx_device_info *di)
+{
+ int temp;
+
+ temp = bq27xxx_read(di, BQ27XXX_REG_TEMP, false);
+ if (temp < 0) {
+ dev_err(di->dev, "error reading temperature\n");
+ return temp;
+ }
+
+ if (di->opts & BQ27XXX_O_ZERO)
+ temp = 5 * temp / 2;
+
+ return temp;
+}
+
+/*
+ * Return the battery Cycle count total
+ * Or < 0 if something fails.
+ */
+static int bq27xxx_battery_read_cyct(struct bq27xxx_device_info *di)
+{
+ int cyct;
+
+ cyct = bq27xxx_read(di, BQ27XXX_REG_CYCT, false);
+ if (cyct < 0)
+ dev_err(di->dev, "error reading cycle count total\n");
+
+ return cyct;
+}
+
+/*
+ * Read a time register.
+ * Return < 0 if something fails.
+ */
+static int bq27xxx_battery_read_time(struct bq27xxx_device_info *di, u8 reg)
+{
+ int tval;
+
+ tval = bq27xxx_read(di, reg, false);
+ if (tval < 0) {
+ dev_dbg(di->dev, "error reading time register %02x: %d\n",
+ reg, tval);
+ return tval;
+ }
+
+ if (tval == 65535)
+ return -ENODATA;
+
+ return tval * 60;
+}
+
+/*
+ * Returns true if a battery over temperature condition is detected
+ */
+static bool bq27xxx_battery_overtemp(struct bq27xxx_device_info *di, u16 flags)
+{
+ if (di->opts & BQ27XXX_O_OTDC)
+ return flags & (BQ27XXX_FLAG_OTC | BQ27XXX_FLAG_OTD);
+ if (di->opts & BQ27XXX_O_UTOT)
+ return flags & BQ27XXX_FLAG_OT;
+
+ return false;
+}
+
+/*
+ * Returns true if a battery under temperature condition is detected
+ */
+static bool bq27xxx_battery_undertemp(struct bq27xxx_device_info *di, u16 flags)
+{
+ if (di->opts & BQ27XXX_O_UTOT)
+ return flags & BQ27XXX_FLAG_UT;
+
+ return false;
+}
+
+/*
+ * Returns true if a low state of charge condition is detected
+ */
+static bool bq27xxx_battery_dead(struct bq27xxx_device_info *di, u16 flags)
+{
+ if (di->opts & BQ27XXX_O_ZERO)
+ return flags & (BQ27000_FLAG_EDV1 | BQ27000_FLAG_EDVF);
+ else if (di->opts & BQ27Z561_O_BITS)
+ return flags & BQ27Z561_FLAG_FDC;
+ else
+ return flags & (BQ27XXX_FLAG_SOC1 | BQ27XXX_FLAG_SOCF);
+}
+
+/*
+ * Returns true if reported battery capacity is inaccurate
+ */
+static bool bq27xxx_battery_capacity_inaccurate(struct bq27xxx_device_info *di,
+ u16 flags)
+{
+ if (di->opts & BQ27XXX_O_HAS_CI)
+ return (flags & BQ27000_FLAG_CI);
+ else
+ return false;
+}
+
+static int bq27xxx_battery_read_health(struct bq27xxx_device_info *di)
+{
+ /* Unlikely but important to return first */
+ if (unlikely(bq27xxx_battery_overtemp(di, di->cache.flags)))
+ return POWER_SUPPLY_HEALTH_OVERHEAT;
+ if (unlikely(bq27xxx_battery_undertemp(di, di->cache.flags)))
+ return POWER_SUPPLY_HEALTH_COLD;
+ if (unlikely(bq27xxx_battery_dead(di, di->cache.flags)))
+ return POWER_SUPPLY_HEALTH_DEAD;
+ if (unlikely(bq27xxx_battery_capacity_inaccurate(di, di->cache.flags)))
+ return POWER_SUPPLY_HEALTH_CALIBRATION_REQUIRED;
+
+ return POWER_SUPPLY_HEALTH_GOOD;
+}
+
+static bool bq27xxx_battery_is_full(struct bq27xxx_device_info *di, int flags)
+{
+ if (di->opts & BQ27XXX_O_ZERO)
+ return (flags & BQ27000_FLAG_FC);
+ else if (di->opts & BQ27Z561_O_BITS)
+ return (flags & BQ27Z561_FLAG_FC);
+ else
+ return (flags & BQ27XXX_FLAG_FC);
+}
+
+/*
+ * Return the battery average current in µA and the status
+ * Note that current can be negative signed as well
+ * Or 0 if something fails.
+ */
+static int bq27xxx_battery_current_and_status(
+ struct bq27xxx_device_info *di,
+ union power_supply_propval *val_curr,
+ union power_supply_propval *val_status,
+ struct bq27xxx_reg_cache *cache)
+{
+ bool single_flags = (di->opts & BQ27XXX_O_ZERO);
+ int curr;
+ int flags;
+
+ curr = bq27xxx_read(di, BQ27XXX_REG_AI, false);
+ if (curr < 0) {
+ dev_err(di->dev, "error reading current\n");
+ return curr;
+ }
+
+ if (cache) {
+ flags = cache->flags;
+ } else {
+ flags = bq27xxx_read(di, BQ27XXX_REG_FLAGS, single_flags);
+ if (flags < 0) {
+ dev_err(di->dev, "error reading flags\n");
+ return flags;
+ }
+ }
+
+ if (di->opts & BQ27XXX_O_ZERO) {
+ if (!(flags & BQ27000_FLAG_CHGS)) {
+ dev_dbg(di->dev, "negative current!\n");
+ curr = -curr;
+ }
+
+ curr = curr * BQ27XXX_CURRENT_CONSTANT / BQ27XXX_RS;
+ } else {
+ /* Other gauges return signed value */
+ curr = (int)((s16)curr) * 1000;
+ }
+
+ if (val_curr)
+ val_curr->intval = curr;
+
+ if (val_status) {
+ if (curr > 0) {
+ val_status->intval = POWER_SUPPLY_STATUS_CHARGING;
+ } else if (curr < 0) {
+ val_status->intval = POWER_SUPPLY_STATUS_DISCHARGING;
+ } else {
+ if (bq27xxx_battery_is_full(di, flags))
+ val_status->intval = POWER_SUPPLY_STATUS_FULL;
+ else
+ val_status->intval =
+ POWER_SUPPLY_STATUS_NOT_CHARGING;
+ }
+ }
+
+ return 0;
+}
+
+static void bq27xxx_battery_update_unlocked(struct bq27xxx_device_info *di)
+{
+ union power_supply_propval status = di->last_status;
+ struct bq27xxx_reg_cache cache = {0, };
+ bool has_singe_flag = di->opts & BQ27XXX_O_ZERO;
+
+ cache.flags = bq27xxx_read(di, BQ27XXX_REG_FLAGS, has_singe_flag);
+ if ((cache.flags & 0xff) == 0xff)
+ cache.flags = -1; /* read error */
+ if (cache.flags >= 0) {
+ cache.temperature = bq27xxx_battery_read_temperature(di);
+ if (di->regs[BQ27XXX_REG_TTE] != INVALID_REG_ADDR)
+ cache.time_to_empty = bq27xxx_battery_read_time(di, BQ27XXX_REG_TTE);
+ if (di->regs[BQ27XXX_REG_TTECP] != INVALID_REG_ADDR)
+ cache.time_to_empty_avg = bq27xxx_battery_read_time(di, BQ27XXX_REG_TTECP);
+ if (di->regs[BQ27XXX_REG_TTF] != INVALID_REG_ADDR)
+ cache.time_to_full = bq27xxx_battery_read_time(di, BQ27XXX_REG_TTF);
+
+ cache.charge_full = bq27xxx_battery_read_fcc(di);
+ cache.capacity = bq27xxx_battery_read_soc(di);
+ if (di->regs[BQ27XXX_REG_AE] != INVALID_REG_ADDR)
+ cache.energy = bq27xxx_battery_read_energy(di);
+ di->cache.flags = cache.flags;
+ cache.health = bq27xxx_battery_read_health(di);
+ if (di->regs[BQ27XXX_REG_CYCT] != INVALID_REG_ADDR)
+ cache.cycle_count = bq27xxx_battery_read_cyct(di);
+
+ /*
+ * On gauges with signed current reporting the current must be
+ * checked to detect charging <-> discharging status changes.
+ */
+ if (!(di->opts & BQ27XXX_O_ZERO))
+ bq27xxx_battery_current_and_status(di, NULL, &status, &cache);
+
+ /* We only have to read charge design full once */
+ if (di->charge_design_full <= 0)
+ di->charge_design_full = bq27xxx_battery_read_dcap(di);
+ }
+
+ if ((di->cache.capacity != cache.capacity) ||
+ (di->cache.flags != cache.flags) ||
+ (di->last_status.intval != status.intval)) {
+ di->last_status.intval = status.intval;
+ power_supply_changed(di->bat);
+ }
+
+ if (memcmp(&di->cache, &cache, sizeof(cache)) != 0)
+ di->cache = cache;
+
+ di->last_update = jiffies;
+
+ if (!di->removed && poll_interval > 0)
+ mod_delayed_work(system_wq, &di->work, poll_interval * HZ);
+}
+
+void bq27xxx_battery_update(struct bq27xxx_device_info *di)
+{
+ mutex_lock(&di->lock);
+ bq27xxx_battery_update_unlocked(di);
+ mutex_unlock(&di->lock);
+}
+EXPORT_SYMBOL_GPL(bq27xxx_battery_update);
+
+static void bq27xxx_battery_poll(struct work_struct *work)
+{
+ struct bq27xxx_device_info *di =
+ container_of(work, struct bq27xxx_device_info,
+ work.work);
+
+ bq27xxx_battery_update(di);
+}
+
+/*
+ * Get the average power in µW
+ * Return < 0 if something fails.
+ */
+static int bq27xxx_battery_pwr_avg(struct bq27xxx_device_info *di,
+ union power_supply_propval *val)
+{
+ int power;
+
+ power = bq27xxx_read(di, BQ27XXX_REG_AP, false);
+ if (power < 0) {
+ dev_err(di->dev,
+ "error reading average power register %02x: %d\n",
+ BQ27XXX_REG_AP, power);
+ return power;
+ }
+
+ if (di->opts & BQ27XXX_O_ZERO)
+ val->intval = (power * BQ27XXX_POWER_CONSTANT) / BQ27XXX_RS;
+ else
+ /* Other gauges return a signed value in units of 10mW */
+ val->intval = (int)((s16)power) * 10000;
+
+ return 0;
+}
+
+static int bq27xxx_battery_capacity_level(struct bq27xxx_device_info *di,
+ union power_supply_propval *val)
+{
+ int level;
+
+ if (di->opts & BQ27XXX_O_ZERO) {
+ if (di->cache.flags & BQ27000_FLAG_FC)
+ level = POWER_SUPPLY_CAPACITY_LEVEL_FULL;
+ else if (di->cache.flags & BQ27000_FLAG_EDV1)
+ level = POWER_SUPPLY_CAPACITY_LEVEL_LOW;
+ else if (di->cache.flags & BQ27000_FLAG_EDVF)
+ level = POWER_SUPPLY_CAPACITY_LEVEL_CRITICAL;
+ else
+ level = POWER_SUPPLY_CAPACITY_LEVEL_NORMAL;
+ } else if (di->opts & BQ27Z561_O_BITS) {
+ if (di->cache.flags & BQ27Z561_FLAG_FC)
+ level = POWER_SUPPLY_CAPACITY_LEVEL_FULL;
+ else if (di->cache.flags & BQ27Z561_FLAG_FDC)
+ level = POWER_SUPPLY_CAPACITY_LEVEL_CRITICAL;
+ else
+ level = POWER_SUPPLY_CAPACITY_LEVEL_NORMAL;
+ } else {
+ if (di->cache.flags & BQ27XXX_FLAG_FC)
+ level = POWER_SUPPLY_CAPACITY_LEVEL_FULL;
+ else if (di->cache.flags & BQ27XXX_FLAG_SOC1)
+ level = POWER_SUPPLY_CAPACITY_LEVEL_LOW;
+ else if (di->cache.flags & BQ27XXX_FLAG_SOCF)
+ level = POWER_SUPPLY_CAPACITY_LEVEL_CRITICAL;
+ else
+ level = POWER_SUPPLY_CAPACITY_LEVEL_NORMAL;
+ }
+
+ val->intval = level;
+
+ return 0;
+}
+
+/*
+ * Return the battery Voltage in millivolts
+ * Or < 0 if something fails.
+ */
+static int bq27xxx_battery_voltage(struct bq27xxx_device_info *di,
+ union power_supply_propval *val)
+{
+ int volt;
+
+ volt = bq27xxx_read(di, BQ27XXX_REG_VOLT, false);
+ if (volt < 0) {
+ dev_err(di->dev, "error reading voltage\n");
+ return volt;
+ }
+
+ val->intval = volt * 1000;
+
+ return 0;
+}
+
+static int bq27xxx_simple_value(int value,
+ union power_supply_propval *val)
+{
+ if (value < 0)
+ return value;
+
+ val->intval = value;
+
+ return 0;
+}
+
+static int bq27xxx_battery_get_property(struct power_supply *psy,
+ enum power_supply_property psp,
+ union power_supply_propval *val)
+{
+ int ret = 0;
+ struct bq27xxx_device_info *di = power_supply_get_drvdata(psy);
+
+ mutex_lock(&di->lock);
+ if (time_is_before_jiffies(di->last_update + 5 * HZ))
+ bq27xxx_battery_update_unlocked(di);
+ mutex_unlock(&di->lock);
+
+ if (psp != POWER_SUPPLY_PROP_PRESENT && di->cache.flags < 0)
+ return -ENODEV;
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_STATUS:
+ ret = bq27xxx_battery_current_and_status(di, NULL, val, NULL);
+ break;
+ case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+ ret = bq27xxx_battery_voltage(di, val);
+ break;
+ case POWER_SUPPLY_PROP_PRESENT:
+ val->intval = di->cache.flags < 0 ? 0 : 1;
+ break;
+ case POWER_SUPPLY_PROP_CURRENT_NOW:
+ ret = bq27xxx_battery_current_and_status(di, val, NULL, NULL);
+ break;
+ case POWER_SUPPLY_PROP_CAPACITY:
+ ret = bq27xxx_simple_value(di->cache.capacity, val);
+ break;
+ case POWER_SUPPLY_PROP_CAPACITY_LEVEL:
+ ret = bq27xxx_battery_capacity_level(di, val);
+ break;
+ case POWER_SUPPLY_PROP_TEMP:
+ ret = bq27xxx_simple_value(di->cache.temperature, val);
+ if (ret == 0)
+ val->intval -= 2731; /* convert decidegree k to c */
+ break;
+ case POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW:
+ ret = bq27xxx_simple_value(di->cache.time_to_empty, val);
+ break;
+ case POWER_SUPPLY_PROP_TIME_TO_EMPTY_AVG:
+ ret = bq27xxx_simple_value(di->cache.time_to_empty_avg, val);
+ break;
+ case POWER_SUPPLY_PROP_TIME_TO_FULL_NOW:
+ ret = bq27xxx_simple_value(di->cache.time_to_full, val);
+ break;
+ case POWER_SUPPLY_PROP_TECHNOLOGY:
+ if (di->opts & BQ27XXX_O_MUL_CHEM)
+ val->intval = POWER_SUPPLY_TECHNOLOGY_UNKNOWN;
+ else
+ val->intval = POWER_SUPPLY_TECHNOLOGY_LION;
+ break;
+ case POWER_SUPPLY_PROP_CHARGE_NOW:
+ ret = bq27xxx_simple_value(bq27xxx_battery_read_nac(di), val);
+ break;
+ case POWER_SUPPLY_PROP_CHARGE_FULL:
+ ret = bq27xxx_simple_value(di->cache.charge_full, val);
+ break;
+ case POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN:
+ ret = bq27xxx_simple_value(di->charge_design_full, val);
+ break;
+ /*
+ * TODO: Implement these to make registers set from
+ * power_supply_battery_info visible in sysfs.
+ */
+ case POWER_SUPPLY_PROP_ENERGY_FULL_DESIGN:
+ case POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN:
+ return -EINVAL;
+ case POWER_SUPPLY_PROP_CYCLE_COUNT:
+ ret = bq27xxx_simple_value(di->cache.cycle_count, val);
+ break;
+ case POWER_SUPPLY_PROP_ENERGY_NOW:
+ ret = bq27xxx_simple_value(di->cache.energy, val);
+ break;
+ case POWER_SUPPLY_PROP_POWER_AVG:
+ ret = bq27xxx_battery_pwr_avg(di, val);
+ break;
+ case POWER_SUPPLY_PROP_HEALTH:
+ ret = bq27xxx_simple_value(di->cache.health, val);
+ break;
+ case POWER_SUPPLY_PROP_MANUFACTURER:
+ val->strval = BQ27XXX_MANUFACTURER;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return ret;
+}
+
+static void bq27xxx_external_power_changed(struct power_supply *psy)
+{
+ struct bq27xxx_device_info *di = power_supply_get_drvdata(psy);
+
+ /* After charger plug in/out wait 0.5s for things to stabilize */
+ mod_delayed_work(system_wq, &di->work, HZ / 2);
+}
+
+int bq27xxx_battery_setup(struct bq27xxx_device_info *di)
+{
+ struct power_supply_desc *psy_desc;
+ struct power_supply_config psy_cfg = {
+ .of_node = di->dev->of_node,
+ .drv_data = di,
+ };
+
+ INIT_DELAYED_WORK(&di->work, bq27xxx_battery_poll);
+ mutex_init(&di->lock);
+
+ di->regs = bq27xxx_chip_data[di->chip].regs;
+ di->unseal_key = bq27xxx_chip_data[di->chip].unseal_key;
+ di->dm_regs = bq27xxx_chip_data[di->chip].dm_regs;
+ di->opts = bq27xxx_chip_data[di->chip].opts;
+
+ psy_desc = devm_kzalloc(di->dev, sizeof(*psy_desc), GFP_KERNEL);
+ if (!psy_desc)
+ return -ENOMEM;
+
+ psy_desc->name = di->name;
+ psy_desc->type = POWER_SUPPLY_TYPE_BATTERY;
+ psy_desc->properties = bq27xxx_chip_data[di->chip].props;
+ psy_desc->num_properties = bq27xxx_chip_data[di->chip].props_size;
+ psy_desc->get_property = bq27xxx_battery_get_property;
+ psy_desc->external_power_changed = bq27xxx_external_power_changed;
+
+ di->bat = power_supply_register_no_ws(di->dev, psy_desc, &psy_cfg);
+ if (IS_ERR(di->bat))
+ return dev_err_probe(di->dev, PTR_ERR(di->bat),
+ "failed to register battery\n");
+
+ bq27xxx_battery_settings(di);
+ bq27xxx_battery_update(di);
+
+ mutex_lock(&bq27xxx_list_lock);
+ list_add(&di->list, &bq27xxx_battery_devices);
+ mutex_unlock(&bq27xxx_list_lock);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(bq27xxx_battery_setup);
+
+void bq27xxx_battery_teardown(struct bq27xxx_device_info *di)
+{
+ mutex_lock(&bq27xxx_list_lock);
+ list_del(&di->list);
+ mutex_unlock(&bq27xxx_list_lock);
+
+ /* Set removed to avoid bq27xxx_battery_update() re-queuing the work */
+ mutex_lock(&di->lock);
+ di->removed = true;
+ mutex_unlock(&di->lock);
+
+ cancel_delayed_work_sync(&di->work);
+
+ power_supply_unregister(di->bat);
+ mutex_destroy(&di->lock);
+}
+EXPORT_SYMBOL_GPL(bq27xxx_battery_teardown);
+
+MODULE_AUTHOR("Rodolfo Giometti <giometti@linux.it>");
+MODULE_DESCRIPTION("BQ27xxx battery monitor driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/power/supply/bq27xxx_battery_hdq.c b/drivers/power/supply/bq27xxx_battery_hdq.c
new file mode 100644
index 000000000..922759ab2
--- /dev/null
+++ b/drivers/power/supply/bq27xxx_battery_hdq.c
@@ -0,0 +1,128 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * BQ27xxx battery monitor HDQ/1-wire driver
+ *
+ * Copyright (C) 2007-2017 Texas Instruments Incorporated - https://www.ti.com/
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/types.h>
+#include <linux/platform_device.h>
+#include <linux/mutex.h>
+#include <linux/power/bq27xxx_battery.h>
+
+#include <linux/w1.h>
+
+#define W1_FAMILY_BQ27000 0x01
+
+#define HDQ_CMD_READ (0 << 7)
+#define HDQ_CMD_WRITE (1 << 7)
+
+static int F_ID;
+module_param(F_ID, int, S_IRUSR);
+MODULE_PARM_DESC(F_ID, "1-wire slave FID for BQ27xxx device");
+
+static int w1_bq27000_read(struct w1_slave *sl, unsigned int reg)
+{
+ u8 val;
+
+ mutex_lock(&sl->master->bus_mutex);
+ w1_write_8(sl->master, HDQ_CMD_READ | reg);
+ val = w1_read_8(sl->master);
+ mutex_unlock(&sl->master->bus_mutex);
+
+ return val;
+}
+
+static int bq27xxx_battery_hdq_read(struct bq27xxx_device_info *di, u8 reg,
+ bool single)
+{
+ struct w1_slave *sl = dev_to_w1_slave(di->dev);
+ unsigned int timeout = 3;
+ int upper, lower;
+ int temp;
+
+ if (!single) {
+ /*
+ * Make sure the value has not changed in between reading the
+ * lower and the upper part
+ */
+ upper = w1_bq27000_read(sl, reg + 1);
+ do {
+ temp = upper;
+ if (upper < 0)
+ return upper;
+
+ lower = w1_bq27000_read(sl, reg);
+ if (lower < 0)
+ return lower;
+
+ upper = w1_bq27000_read(sl, reg + 1);
+ } while (temp != upper && --timeout);
+
+ if (timeout == 0)
+ return -EIO;
+
+ return (upper << 8) | lower;
+ }
+
+ return w1_bq27000_read(sl, reg);
+}
+
+static int bq27xxx_battery_hdq_add_slave(struct w1_slave *sl)
+{
+ struct bq27xxx_device_info *di;
+
+ di = devm_kzalloc(&sl->dev, sizeof(*di), GFP_KERNEL);
+ if (!di)
+ return -ENOMEM;
+
+ dev_set_drvdata(&sl->dev, di);
+
+ di->dev = &sl->dev;
+ di->chip = BQ27000;
+ di->name = "bq27000-battery";
+ di->bus.read = bq27xxx_battery_hdq_read;
+
+ return bq27xxx_battery_setup(di);
+}
+
+static void bq27xxx_battery_hdq_remove_slave(struct w1_slave *sl)
+{
+ struct bq27xxx_device_info *di = dev_get_drvdata(&sl->dev);
+
+ bq27xxx_battery_teardown(di);
+}
+
+static const struct w1_family_ops bq27xxx_battery_hdq_fops = {
+ .add_slave = bq27xxx_battery_hdq_add_slave,
+ .remove_slave = bq27xxx_battery_hdq_remove_slave,
+};
+
+static struct w1_family bq27xxx_battery_hdq_family = {
+ .fid = W1_FAMILY_BQ27000,
+ .fops = &bq27xxx_battery_hdq_fops,
+};
+
+static int __init bq27xxx_battery_hdq_init(void)
+{
+ if (F_ID)
+ bq27xxx_battery_hdq_family.fid = F_ID;
+
+ return w1_register_family(&bq27xxx_battery_hdq_family);
+}
+module_init(bq27xxx_battery_hdq_init);
+
+static void __exit bq27xxx_battery_hdq_exit(void)
+{
+ w1_unregister_family(&bq27xxx_battery_hdq_family);
+}
+module_exit(bq27xxx_battery_hdq_exit);
+
+MODULE_AUTHOR("Texas Instruments Ltd");
+MODULE_DESCRIPTION("BQ27xxx battery monitor HDQ/1-wire driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("w1-family-" __stringify(W1_FAMILY_BQ27000));
diff --git a/drivers/power/supply/bq27xxx_battery_i2c.c b/drivers/power/supply/bq27xxx_battery_i2c.c
new file mode 100644
index 000000000..0e32efb10
--- /dev/null
+++ b/drivers/power/supply/bq27xxx_battery_i2c.c
@@ -0,0 +1,307 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * BQ27xxx battery monitor I2C driver
+ *
+ * Copyright (C) 2015 Texas Instruments Incorporated - https://www.ti.com/
+ * Andrew F. Davis <afd@ti.com>
+ */
+
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <asm/unaligned.h>
+
+#include <linux/power/bq27xxx_battery.h>
+
+static DEFINE_IDR(battery_id);
+static DEFINE_MUTEX(battery_mutex);
+
+static irqreturn_t bq27xxx_battery_irq_handler_thread(int irq, void *data)
+{
+ struct bq27xxx_device_info *di = data;
+
+ bq27xxx_battery_update(di);
+
+ return IRQ_HANDLED;
+}
+
+static int bq27xxx_battery_i2c_read(struct bq27xxx_device_info *di, u8 reg,
+ bool single)
+{
+ struct i2c_client *client = to_i2c_client(di->dev);
+ struct i2c_msg msg[2];
+ u8 data[2];
+ int ret;
+
+ if (!client->adapter)
+ return -ENODEV;
+
+ msg[0].addr = client->addr;
+ msg[0].flags = 0;
+ msg[0].buf = &reg;
+ msg[0].len = sizeof(reg);
+ msg[1].addr = client->addr;
+ msg[1].flags = I2C_M_RD;
+ msg[1].buf = data;
+ if (single)
+ msg[1].len = 1;
+ else
+ msg[1].len = 2;
+
+ ret = i2c_transfer(client->adapter, msg, ARRAY_SIZE(msg));
+ if (ret < 0)
+ return ret;
+
+ if (!single)
+ ret = get_unaligned_le16(data);
+ else
+ ret = data[0];
+
+ return ret;
+}
+
+static int bq27xxx_battery_i2c_write(struct bq27xxx_device_info *di, u8 reg,
+ int value, bool single)
+{
+ struct i2c_client *client = to_i2c_client(di->dev);
+ struct i2c_msg msg;
+ u8 data[4];
+ int ret;
+
+ if (!client->adapter)
+ return -ENODEV;
+
+ data[0] = reg;
+ if (single) {
+ data[1] = (u8) value;
+ msg.len = 2;
+ } else {
+ put_unaligned_le16(value, &data[1]);
+ msg.len = 3;
+ }
+
+ msg.buf = data;
+ msg.addr = client->addr;
+ msg.flags = 0;
+
+ ret = i2c_transfer(client->adapter, &msg, 1);
+ if (ret < 0)
+ return ret;
+ if (ret != 1)
+ return -EINVAL;
+ return 0;
+}
+
+static int bq27xxx_battery_i2c_bulk_read(struct bq27xxx_device_info *di, u8 reg,
+ u8 *data, int len)
+{
+ struct i2c_client *client = to_i2c_client(di->dev);
+ int ret;
+
+ if (!client->adapter)
+ return -ENODEV;
+
+ ret = i2c_smbus_read_i2c_block_data(client, reg, len, data);
+ if (ret < 0)
+ return ret;
+ if (ret != len)
+ return -EINVAL;
+ return 0;
+}
+
+static int bq27xxx_battery_i2c_bulk_write(struct bq27xxx_device_info *di,
+ u8 reg, u8 *data, int len)
+{
+ struct i2c_client *client = to_i2c_client(di->dev);
+ struct i2c_msg msg;
+ u8 buf[33];
+ int ret;
+
+ if (!client->adapter)
+ return -ENODEV;
+
+ buf[0] = reg;
+ memcpy(&buf[1], data, len);
+
+ msg.buf = buf;
+ msg.addr = client->addr;
+ msg.flags = 0;
+ msg.len = len + 1;
+
+ ret = i2c_transfer(client->adapter, &msg, 1);
+ if (ret < 0)
+ return ret;
+ if (ret != 1)
+ return -EINVAL;
+ return 0;
+}
+
+static int bq27xxx_battery_i2c_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct bq27xxx_device_info *di;
+ int ret;
+ char *name;
+ int num;
+
+ /* Get new ID for the new battery device */
+ mutex_lock(&battery_mutex);
+ num = idr_alloc(&battery_id, client, 0, 0, GFP_KERNEL);
+ mutex_unlock(&battery_mutex);
+ if (num < 0)
+ return num;
+
+ name = devm_kasprintf(&client->dev, GFP_KERNEL, "%s-%d", id->name, num);
+ if (!name)
+ goto err_mem;
+
+ di = devm_kzalloc(&client->dev, sizeof(*di), GFP_KERNEL);
+ if (!di)
+ goto err_mem;
+
+ di->id = num;
+ di->dev = &client->dev;
+ di->chip = id->driver_data;
+ di->name = name;
+
+ di->bus.read = bq27xxx_battery_i2c_read;
+ di->bus.write = bq27xxx_battery_i2c_write;
+ di->bus.read_bulk = bq27xxx_battery_i2c_bulk_read;
+ di->bus.write_bulk = bq27xxx_battery_i2c_bulk_write;
+
+ ret = bq27xxx_battery_setup(di);
+ if (ret)
+ goto err_failed;
+
+ /* Schedule a polling after about 1 min */
+ schedule_delayed_work(&di->work, 60 * HZ);
+
+ i2c_set_clientdata(client, di);
+
+ if (client->irq) {
+ ret = request_threaded_irq(client->irq,
+ NULL, bq27xxx_battery_irq_handler_thread,
+ IRQF_ONESHOT,
+ di->name, di);
+ if (ret) {
+ dev_err(&client->dev,
+ "Unable to register IRQ %d error %d\n",
+ client->irq, ret);
+ bq27xxx_battery_teardown(di);
+ goto err_failed;
+ }
+ }
+
+ return 0;
+
+err_mem:
+ ret = -ENOMEM;
+
+err_failed:
+ mutex_lock(&battery_mutex);
+ idr_remove(&battery_id, num);
+ mutex_unlock(&battery_mutex);
+
+ return ret;
+}
+
+static int bq27xxx_battery_i2c_remove(struct i2c_client *client)
+{
+ struct bq27xxx_device_info *di = i2c_get_clientdata(client);
+
+ free_irq(client->irq, di);
+ bq27xxx_battery_teardown(di);
+
+ mutex_lock(&battery_mutex);
+ idr_remove(&battery_id, di->id);
+ mutex_unlock(&battery_mutex);
+
+ return 0;
+}
+
+static const struct i2c_device_id bq27xxx_i2c_id_table[] = {
+ { "bq27200", BQ27000 },
+ { "bq27210", BQ27010 },
+ { "bq27500", BQ2750X },
+ { "bq27510", BQ2751X },
+ { "bq27520", BQ2752X },
+ { "bq27500-1", BQ27500 },
+ { "bq27510g1", BQ27510G1 },
+ { "bq27510g2", BQ27510G2 },
+ { "bq27510g3", BQ27510G3 },
+ { "bq27520g1", BQ27520G1 },
+ { "bq27520g2", BQ27520G2 },
+ { "bq27520g3", BQ27520G3 },
+ { "bq27520g4", BQ27520G4 },
+ { "bq27521", BQ27521 },
+ { "bq27530", BQ27530 },
+ { "bq27531", BQ27531 },
+ { "bq27541", BQ27541 },
+ { "bq27542", BQ27542 },
+ { "bq27546", BQ27546 },
+ { "bq27742", BQ27742 },
+ { "bq27545", BQ27545 },
+ { "bq27411", BQ27411 },
+ { "bq27421", BQ27421 },
+ { "bq27425", BQ27425 },
+ { "bq27426", BQ27426 },
+ { "bq27441", BQ27441 },
+ { "bq27621", BQ27621 },
+ { "bq27z561", BQ27Z561 },
+ { "bq28z610", BQ28Z610 },
+ { "bq34z100", BQ34Z100 },
+ {},
+};
+MODULE_DEVICE_TABLE(i2c, bq27xxx_i2c_id_table);
+
+#ifdef CONFIG_OF
+static const struct of_device_id bq27xxx_battery_i2c_of_match_table[] = {
+ { .compatible = "ti,bq27200" },
+ { .compatible = "ti,bq27210" },
+ { .compatible = "ti,bq27500" },
+ { .compatible = "ti,bq27510" },
+ { .compatible = "ti,bq27520" },
+ { .compatible = "ti,bq27500-1" },
+ { .compatible = "ti,bq27510g1" },
+ { .compatible = "ti,bq27510g2" },
+ { .compatible = "ti,bq27510g3" },
+ { .compatible = "ti,bq27520g1" },
+ { .compatible = "ti,bq27520g2" },
+ { .compatible = "ti,bq27520g3" },
+ { .compatible = "ti,bq27520g4" },
+ { .compatible = "ti,bq27521" },
+ { .compatible = "ti,bq27530" },
+ { .compatible = "ti,bq27531" },
+ { .compatible = "ti,bq27541" },
+ { .compatible = "ti,bq27542" },
+ { .compatible = "ti,bq27546" },
+ { .compatible = "ti,bq27742" },
+ { .compatible = "ti,bq27545" },
+ { .compatible = "ti,bq27411" },
+ { .compatible = "ti,bq27421" },
+ { .compatible = "ti,bq27425" },
+ { .compatible = "ti,bq27426" },
+ { .compatible = "ti,bq27441" },
+ { .compatible = "ti,bq27621" },
+ { .compatible = "ti,bq27z561" },
+ { .compatible = "ti,bq28z610" },
+ { .compatible = "ti,bq34z100" },
+ {},
+};
+MODULE_DEVICE_TABLE(of, bq27xxx_battery_i2c_of_match_table);
+#endif
+
+static struct i2c_driver bq27xxx_battery_i2c_driver = {
+ .driver = {
+ .name = "bq27xxx-battery",
+ .of_match_table = of_match_ptr(bq27xxx_battery_i2c_of_match_table),
+ },
+ .probe = bq27xxx_battery_i2c_probe,
+ .remove = bq27xxx_battery_i2c_remove,
+ .id_table = bq27xxx_i2c_id_table,
+};
+module_i2c_driver(bq27xxx_battery_i2c_driver);
+
+MODULE_AUTHOR("Andrew F. Davis <afd@ti.com>");
+MODULE_DESCRIPTION("BQ27xxx battery monitor i2c driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/power/supply/charger-manager.c b/drivers/power/supply/charger-manager.c
new file mode 100644
index 000000000..333349275
--- /dev/null
+++ b/drivers/power/supply/charger-manager.c
@@ -0,0 +1,1773 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2011 Samsung Electronics Co., Ltd.
+ * MyungJoo Ham <myungjoo.ham@samsung.com>
+ *
+ * This driver enables to monitor battery health and control charger
+ * during suspend-to-mem.
+ * Charger manager depends on other devices. Register this later than
+ * the depending devices.
+ *
+**/
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/rtc.h>
+#include <linux/slab.h>
+#include <linux/workqueue.h>
+#include <linux/platform_device.h>
+#include <linux/power/charger-manager.h>
+#include <linux/regulator/consumer.h>
+#include <linux/sysfs.h>
+#include <linux/of.h>
+#include <linux/thermal.h>
+
+static struct {
+ const char *name;
+ u64 extcon_type;
+} extcon_mapping[] = {
+ /* Current textual representations */
+ { "USB", EXTCON_USB },
+ { "USB-HOST", EXTCON_USB_HOST },
+ { "SDP", EXTCON_CHG_USB_SDP },
+ { "DCP", EXTCON_CHG_USB_DCP },
+ { "CDP", EXTCON_CHG_USB_CDP },
+ { "ACA", EXTCON_CHG_USB_ACA },
+ { "FAST-CHARGER", EXTCON_CHG_USB_FAST },
+ { "SLOW-CHARGER", EXTCON_CHG_USB_SLOW },
+ { "WPT", EXTCON_CHG_WPT },
+ { "PD", EXTCON_CHG_USB_PD },
+ { "DOCK", EXTCON_DOCK },
+ { "JIG", EXTCON_JIG },
+ { "MECHANICAL", EXTCON_MECHANICAL },
+ /* Deprecated textual representations */
+ { "TA", EXTCON_CHG_USB_SDP },
+ { "CHARGE-DOWNSTREAM", EXTCON_CHG_USB_CDP },
+};
+
+/*
+ * Default temperature threshold for charging.
+ * Every temperature units are in tenth of centigrade.
+ */
+#define CM_DEFAULT_RECHARGE_TEMP_DIFF 50
+#define CM_DEFAULT_CHARGE_TEMP_MAX 500
+
+/*
+ * Regard CM_JIFFIES_SMALL jiffies is small enough to ignore for
+ * delayed works so that we can run delayed works with CM_JIFFIES_SMALL
+ * without any delays.
+ */
+#define CM_JIFFIES_SMALL (2)
+
+/* If y is valid (> 0) and smaller than x, do x = y */
+#define CM_MIN_VALID(x, y) x = (((y > 0) && ((x) > (y))) ? (y) : (x))
+
+/*
+ * Regard CM_RTC_SMALL (sec) is small enough to ignore error in invoking
+ * rtc alarm. It should be 2 or larger
+ */
+#define CM_RTC_SMALL (2)
+
+static LIST_HEAD(cm_list);
+static DEFINE_MUTEX(cm_list_mtx);
+
+/* About in-suspend (suspend-again) monitoring */
+static struct alarm *cm_timer;
+
+static bool cm_suspended;
+static bool cm_timer_set;
+static unsigned long cm_suspend_duration_ms;
+
+/* About normal (not suspended) monitoring */
+static unsigned long polling_jiffy = ULONG_MAX; /* ULONG_MAX: no polling */
+static unsigned long next_polling; /* Next appointed polling time */
+static struct workqueue_struct *cm_wq; /* init at driver add */
+static struct delayed_work cm_monitor_work; /* init at driver add */
+
+/**
+ * is_batt_present - See if the battery presents in place.
+ * @cm: the Charger Manager representing the battery.
+ */
+static bool is_batt_present(struct charger_manager *cm)
+{
+ union power_supply_propval val;
+ struct power_supply *psy;
+ bool present = false;
+ int i, ret;
+
+ switch (cm->desc->battery_present) {
+ case CM_BATTERY_PRESENT:
+ present = true;
+ break;
+ case CM_NO_BATTERY:
+ break;
+ case CM_FUEL_GAUGE:
+ psy = power_supply_get_by_name(cm->desc->psy_fuel_gauge);
+ if (!psy)
+ break;
+
+ ret = power_supply_get_property(psy, POWER_SUPPLY_PROP_PRESENT,
+ &val);
+ if (ret == 0 && val.intval)
+ present = true;
+ power_supply_put(psy);
+ break;
+ case CM_CHARGER_STAT:
+ for (i = 0; cm->desc->psy_charger_stat[i]; i++) {
+ psy = power_supply_get_by_name(
+ cm->desc->psy_charger_stat[i]);
+ if (!psy) {
+ dev_err(cm->dev, "Cannot find power supply \"%s\"\n",
+ cm->desc->psy_charger_stat[i]);
+ continue;
+ }
+
+ ret = power_supply_get_property(psy,
+ POWER_SUPPLY_PROP_PRESENT, &val);
+ power_supply_put(psy);
+ if (ret == 0 && val.intval) {
+ present = true;
+ break;
+ }
+ }
+ break;
+ }
+
+ return present;
+}
+
+/**
+ * is_ext_pwr_online - See if an external power source is attached to charge
+ * @cm: the Charger Manager representing the battery.
+ *
+ * Returns true if at least one of the chargers of the battery has an external
+ * power source attached to charge the battery regardless of whether it is
+ * actually charging or not.
+ */
+static bool is_ext_pwr_online(struct charger_manager *cm)
+{
+ union power_supply_propval val;
+ struct power_supply *psy;
+ bool online = false;
+ int i, ret;
+
+ /* If at least one of them has one, it's yes. */
+ for (i = 0; cm->desc->psy_charger_stat[i]; i++) {
+ psy = power_supply_get_by_name(cm->desc->psy_charger_stat[i]);
+ if (!psy) {
+ dev_err(cm->dev, "Cannot find power supply \"%s\"\n",
+ cm->desc->psy_charger_stat[i]);
+ continue;
+ }
+
+ ret = power_supply_get_property(psy, POWER_SUPPLY_PROP_ONLINE,
+ &val);
+ power_supply_put(psy);
+ if (ret == 0 && val.intval) {
+ online = true;
+ break;
+ }
+ }
+
+ return online;
+}
+
+/**
+ * get_batt_uV - Get the voltage level of the battery
+ * @cm: the Charger Manager representing the battery.
+ * @uV: the voltage level returned.
+ *
+ * Returns 0 if there is no error.
+ * Returns a negative value on error.
+ */
+static int get_batt_uV(struct charger_manager *cm, int *uV)
+{
+ union power_supply_propval val;
+ struct power_supply *fuel_gauge;
+ int ret;
+
+ fuel_gauge = power_supply_get_by_name(cm->desc->psy_fuel_gauge);
+ if (!fuel_gauge)
+ return -ENODEV;
+
+ ret = power_supply_get_property(fuel_gauge,
+ POWER_SUPPLY_PROP_VOLTAGE_NOW, &val);
+ power_supply_put(fuel_gauge);
+ if (ret)
+ return ret;
+
+ *uV = val.intval;
+ return 0;
+}
+
+/**
+ * is_charging - Returns true if the battery is being charged.
+ * @cm: the Charger Manager representing the battery.
+ */
+static bool is_charging(struct charger_manager *cm)
+{
+ int i, ret;
+ bool charging = false;
+ struct power_supply *psy;
+ union power_supply_propval val;
+
+ /* If there is no battery, it cannot be charged */
+ if (!is_batt_present(cm))
+ return false;
+
+ /* If at least one of the charger is charging, return yes */
+ for (i = 0; cm->desc->psy_charger_stat[i]; i++) {
+ /* 1. The charger sholuld not be DISABLED */
+ if (cm->emergency_stop)
+ continue;
+ if (!cm->charger_enabled)
+ continue;
+
+ psy = power_supply_get_by_name(cm->desc->psy_charger_stat[i]);
+ if (!psy) {
+ dev_err(cm->dev, "Cannot find power supply \"%s\"\n",
+ cm->desc->psy_charger_stat[i]);
+ continue;
+ }
+
+ /* 2. The charger should be online (ext-power) */
+ ret = power_supply_get_property(psy, POWER_SUPPLY_PROP_ONLINE,
+ &val);
+ if (ret) {
+ dev_warn(cm->dev, "Cannot read ONLINE value from %s\n",
+ cm->desc->psy_charger_stat[i]);
+ power_supply_put(psy);
+ continue;
+ }
+ if (val.intval == 0) {
+ power_supply_put(psy);
+ continue;
+ }
+
+ /*
+ * 3. The charger should not be FULL, DISCHARGING,
+ * or NOT_CHARGING.
+ */
+ ret = power_supply_get_property(psy, POWER_SUPPLY_PROP_STATUS,
+ &val);
+ power_supply_put(psy);
+ if (ret) {
+ dev_warn(cm->dev, "Cannot read STATUS value from %s\n",
+ cm->desc->psy_charger_stat[i]);
+ continue;
+ }
+ if (val.intval == POWER_SUPPLY_STATUS_FULL ||
+ val.intval == POWER_SUPPLY_STATUS_DISCHARGING ||
+ val.intval == POWER_SUPPLY_STATUS_NOT_CHARGING)
+ continue;
+
+ /* Then, this is charging. */
+ charging = true;
+ break;
+ }
+
+ return charging;
+}
+
+/**
+ * is_full_charged - Returns true if the battery is fully charged.
+ * @cm: the Charger Manager representing the battery.
+ */
+static bool is_full_charged(struct charger_manager *cm)
+{
+ struct charger_desc *desc = cm->desc;
+ union power_supply_propval val;
+ struct power_supply *fuel_gauge;
+ bool is_full = false;
+ int ret = 0;
+ int uV;
+
+ /* If there is no battery, it cannot be charged */
+ if (!is_batt_present(cm))
+ return false;
+
+ fuel_gauge = power_supply_get_by_name(cm->desc->psy_fuel_gauge);
+ if (!fuel_gauge)
+ return false;
+
+ /* Full, if it's over the fullbatt voltage */
+ if (desc->fullbatt_uV > 0) {
+ ret = get_batt_uV(cm, &uV);
+ if (!ret) {
+ /* Battery is already full, checks voltage drop. */
+ if (cm->battery_status == POWER_SUPPLY_STATUS_FULL
+ && desc->fullbatt_vchkdrop_uV)
+ uV += desc->fullbatt_vchkdrop_uV;
+ if (uV >= desc->fullbatt_uV)
+ return true;
+ }
+ }
+
+ if (desc->fullbatt_full_capacity > 0) {
+ val.intval = 0;
+
+ /* Not full if capacity of fuel gauge isn't full */
+ ret = power_supply_get_property(fuel_gauge,
+ POWER_SUPPLY_PROP_CHARGE_FULL, &val);
+ if (!ret && val.intval > desc->fullbatt_full_capacity) {
+ is_full = true;
+ goto out;
+ }
+ }
+
+ /* Full, if the capacity is more than fullbatt_soc */
+ if (desc->fullbatt_soc > 0) {
+ val.intval = 0;
+
+ ret = power_supply_get_property(fuel_gauge,
+ POWER_SUPPLY_PROP_CAPACITY, &val);
+ if (!ret && val.intval >= desc->fullbatt_soc) {
+ is_full = true;
+ goto out;
+ }
+ }
+
+out:
+ power_supply_put(fuel_gauge);
+ return is_full;
+}
+
+/**
+ * is_polling_required - Return true if need to continue polling for this CM.
+ * @cm: the Charger Manager representing the battery.
+ */
+static bool is_polling_required(struct charger_manager *cm)
+{
+ switch (cm->desc->polling_mode) {
+ case CM_POLL_DISABLE:
+ return false;
+ case CM_POLL_ALWAYS:
+ return true;
+ case CM_POLL_EXTERNAL_POWER_ONLY:
+ return is_ext_pwr_online(cm);
+ case CM_POLL_CHARGING_ONLY:
+ return is_charging(cm);
+ default:
+ dev_warn(cm->dev, "Incorrect polling_mode (%d)\n",
+ cm->desc->polling_mode);
+ }
+
+ return false;
+}
+
+/**
+ * try_charger_enable - Enable/Disable chargers altogether
+ * @cm: the Charger Manager representing the battery.
+ * @enable: true: enable / false: disable
+ *
+ * Note that Charger Manager keeps the charger enabled regardless whether
+ * the charger is charging or not (because battery is full or no external
+ * power source exists) except when CM needs to disable chargers forcibly
+ * because of emergency causes; when the battery is overheated or too cold.
+ */
+static int try_charger_enable(struct charger_manager *cm, bool enable)
+{
+ int err = 0, i;
+ struct charger_desc *desc = cm->desc;
+
+ /* Ignore if it's redundant command */
+ if (enable == cm->charger_enabled)
+ return 0;
+
+ if (enable) {
+ if (cm->emergency_stop)
+ return -EAGAIN;
+
+ /*
+ * Save start time of charging to limit
+ * maximum possible charging time.
+ */
+ cm->charging_start_time = ktime_to_ms(ktime_get());
+ cm->charging_end_time = 0;
+
+ for (i = 0 ; i < desc->num_charger_regulators ; i++) {
+ if (desc->charger_regulators[i].externally_control)
+ continue;
+
+ err = regulator_enable(desc->charger_regulators[i].consumer);
+ if (err < 0) {
+ dev_warn(cm->dev, "Cannot enable %s regulator\n",
+ desc->charger_regulators[i].regulator_name);
+ }
+ }
+ } else {
+ /*
+ * Save end time of charging to maintain fully charged state
+ * of battery after full-batt.
+ */
+ cm->charging_start_time = 0;
+ cm->charging_end_time = ktime_to_ms(ktime_get());
+
+ for (i = 0 ; i < desc->num_charger_regulators ; i++) {
+ if (desc->charger_regulators[i].externally_control)
+ continue;
+
+ err = regulator_disable(desc->charger_regulators[i].consumer);
+ if (err < 0) {
+ dev_warn(cm->dev, "Cannot disable %s regulator\n",
+ desc->charger_regulators[i].regulator_name);
+ }
+ }
+
+ /*
+ * Abnormal battery state - Stop charging forcibly,
+ * even if charger was enabled at the other places
+ */
+ for (i = 0; i < desc->num_charger_regulators; i++) {
+ if (regulator_is_enabled(
+ desc->charger_regulators[i].consumer)) {
+ regulator_force_disable(
+ desc->charger_regulators[i].consumer);
+ dev_warn(cm->dev, "Disable regulator(%s) forcibly\n",
+ desc->charger_regulators[i].regulator_name);
+ }
+ }
+ }
+
+ if (!err)
+ cm->charger_enabled = enable;
+
+ return err;
+}
+
+/**
+ * check_charging_duration - Monitor charging/discharging duration
+ * @cm: the Charger Manager representing the battery.
+ *
+ * If whole charging duration exceed 'charging_max_duration_ms',
+ * cm stop charging to prevent overcharge/overheat. If discharging
+ * duration exceed 'discharging _max_duration_ms', charger cable is
+ * attached, after full-batt, cm start charging to maintain fully
+ * charged state for battery.
+ */
+static int check_charging_duration(struct charger_manager *cm)
+{
+ struct charger_desc *desc = cm->desc;
+ u64 curr = ktime_to_ms(ktime_get());
+ u64 duration;
+ int ret = false;
+
+ if (!desc->charging_max_duration_ms &&
+ !desc->discharging_max_duration_ms)
+ return ret;
+
+ if (cm->charger_enabled) {
+ duration = curr - cm->charging_start_time;
+
+ if (duration > desc->charging_max_duration_ms) {
+ dev_info(cm->dev, "Charging duration exceed %ums\n",
+ desc->charging_max_duration_ms);
+ ret = true;
+ }
+ } else if (cm->battery_status == POWER_SUPPLY_STATUS_NOT_CHARGING) {
+ duration = curr - cm->charging_end_time;
+
+ if (duration > desc->discharging_max_duration_ms) {
+ dev_info(cm->dev, "Discharging duration exceed %ums\n",
+ desc->discharging_max_duration_ms);
+ ret = true;
+ }
+ }
+
+ return ret;
+}
+
+static int cm_get_battery_temperature_by_psy(struct charger_manager *cm,
+ int *temp)
+{
+ struct power_supply *fuel_gauge;
+ int ret;
+
+ fuel_gauge = power_supply_get_by_name(cm->desc->psy_fuel_gauge);
+ if (!fuel_gauge)
+ return -ENODEV;
+
+ ret = power_supply_get_property(fuel_gauge,
+ POWER_SUPPLY_PROP_TEMP,
+ (union power_supply_propval *)temp);
+ power_supply_put(fuel_gauge);
+
+ return ret;
+}
+
+static int cm_get_battery_temperature(struct charger_manager *cm,
+ int *temp)
+{
+ int ret;
+
+ if (!cm->desc->measure_battery_temp)
+ return -ENODEV;
+
+#ifdef CONFIG_THERMAL
+ if (cm->tzd_batt) {
+ ret = thermal_zone_get_temp(cm->tzd_batt, temp);
+ if (!ret)
+ /* Calibrate temperature unit */
+ *temp /= 100;
+ } else
+#endif
+ {
+ /* if-else continued from CONFIG_THERMAL */
+ ret = cm_get_battery_temperature_by_psy(cm, temp);
+ }
+
+ return ret;
+}
+
+static int cm_check_thermal_status(struct charger_manager *cm)
+{
+ struct charger_desc *desc = cm->desc;
+ int temp, upper_limit, lower_limit;
+ int ret = 0;
+
+ ret = cm_get_battery_temperature(cm, &temp);
+ if (ret) {
+ /* FIXME:
+ * No information of battery temperature might
+ * occur hazardous result. We have to handle it
+ * depending on battery type.
+ */
+ dev_err(cm->dev, "Failed to get battery temperature\n");
+ return 0;
+ }
+
+ upper_limit = desc->temp_max;
+ lower_limit = desc->temp_min;
+
+ if (cm->emergency_stop) {
+ upper_limit -= desc->temp_diff;
+ lower_limit += desc->temp_diff;
+ }
+
+ if (temp > upper_limit)
+ ret = CM_BATT_OVERHEAT;
+ else if (temp < lower_limit)
+ ret = CM_BATT_COLD;
+ else
+ ret = CM_BATT_OK;
+
+ cm->emergency_stop = ret;
+
+ return ret;
+}
+
+/**
+ * cm_get_target_status - Check current status and get next target status.
+ * @cm: the Charger Manager representing the battery.
+ */
+static int cm_get_target_status(struct charger_manager *cm)
+{
+ if (!is_ext_pwr_online(cm))
+ return POWER_SUPPLY_STATUS_DISCHARGING;
+
+ if (cm_check_thermal_status(cm)) {
+ /* Check if discharging duration exeeds limit. */
+ if (check_charging_duration(cm))
+ goto charging_ok;
+ return POWER_SUPPLY_STATUS_NOT_CHARGING;
+ }
+
+ switch (cm->battery_status) {
+ case POWER_SUPPLY_STATUS_CHARGING:
+ /* Check if charging duration exeeds limit. */
+ if (check_charging_duration(cm))
+ return POWER_SUPPLY_STATUS_FULL;
+ fallthrough;
+ case POWER_SUPPLY_STATUS_FULL:
+ if (is_full_charged(cm))
+ return POWER_SUPPLY_STATUS_FULL;
+ fallthrough;
+ default:
+ break;
+ }
+
+charging_ok:
+ /* Charging is allowed. */
+ return POWER_SUPPLY_STATUS_CHARGING;
+}
+
+/**
+ * _cm_monitor - Monitor the temperature and return true for exceptions.
+ * @cm: the Charger Manager representing the battery.
+ *
+ * Returns true if there is an event to notify for the battery.
+ * (True if the status of "emergency_stop" changes)
+ */
+static bool _cm_monitor(struct charger_manager *cm)
+{
+ int target;
+
+ target = cm_get_target_status(cm);
+
+ try_charger_enable(cm, (target == POWER_SUPPLY_STATUS_CHARGING));
+
+ if (cm->battery_status != target) {
+ cm->battery_status = target;
+ power_supply_changed(cm->charger_psy);
+ }
+
+ return (cm->battery_status == POWER_SUPPLY_STATUS_NOT_CHARGING);
+}
+
+/**
+ * cm_monitor - Monitor every battery.
+ *
+ * Returns true if there is an event to notify from any of the batteries.
+ * (True if the status of "emergency_stop" changes)
+ */
+static bool cm_monitor(void)
+{
+ bool stop = false;
+ struct charger_manager *cm;
+
+ mutex_lock(&cm_list_mtx);
+
+ list_for_each_entry(cm, &cm_list, entry) {
+ if (_cm_monitor(cm))
+ stop = true;
+ }
+
+ mutex_unlock(&cm_list_mtx);
+
+ return stop;
+}
+
+/**
+ * _setup_polling - Setup the next instance of polling.
+ * @work: work_struct of the function _setup_polling.
+ */
+static void _setup_polling(struct work_struct *work)
+{
+ unsigned long min = ULONG_MAX;
+ struct charger_manager *cm;
+ bool keep_polling = false;
+ unsigned long _next_polling;
+
+ mutex_lock(&cm_list_mtx);
+
+ list_for_each_entry(cm, &cm_list, entry) {
+ if (is_polling_required(cm) && cm->desc->polling_interval_ms) {
+ keep_polling = true;
+
+ if (min > cm->desc->polling_interval_ms)
+ min = cm->desc->polling_interval_ms;
+ }
+ }
+
+ polling_jiffy = msecs_to_jiffies(min);
+ if (polling_jiffy <= CM_JIFFIES_SMALL)
+ polling_jiffy = CM_JIFFIES_SMALL + 1;
+
+ if (!keep_polling)
+ polling_jiffy = ULONG_MAX;
+ if (polling_jiffy == ULONG_MAX)
+ goto out;
+
+ WARN(cm_wq == NULL, "charger-manager: workqueue not initialized"
+ ". try it later. %s\n", __func__);
+
+ /*
+ * Use mod_delayed_work() iff the next polling interval should
+ * occur before the currently scheduled one. If @cm_monitor_work
+ * isn't active, the end result is the same, so no need to worry
+ * about stale @next_polling.
+ */
+ _next_polling = jiffies + polling_jiffy;
+
+ if (time_before(_next_polling, next_polling)) {
+ mod_delayed_work(cm_wq, &cm_monitor_work, polling_jiffy);
+ next_polling = _next_polling;
+ } else {
+ if (queue_delayed_work(cm_wq, &cm_monitor_work, polling_jiffy))
+ next_polling = _next_polling;
+ }
+out:
+ mutex_unlock(&cm_list_mtx);
+}
+static DECLARE_WORK(setup_polling, _setup_polling);
+
+/**
+ * cm_monitor_poller - The Monitor / Poller.
+ * @work: work_struct of the function cm_monitor_poller
+ *
+ * During non-suspended state, cm_monitor_poller is used to poll and monitor
+ * the batteries.
+ */
+static void cm_monitor_poller(struct work_struct *work)
+{
+ cm_monitor();
+ schedule_work(&setup_polling);
+}
+
+static int charger_get_property(struct power_supply *psy,
+ enum power_supply_property psp,
+ union power_supply_propval *val)
+{
+ struct charger_manager *cm = power_supply_get_drvdata(psy);
+ struct charger_desc *desc = cm->desc;
+ struct power_supply *fuel_gauge = NULL;
+ int ret = 0;
+ int uV;
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_STATUS:
+ val->intval = cm->battery_status;
+ break;
+ case POWER_SUPPLY_PROP_HEALTH:
+ if (cm->emergency_stop > 0)
+ val->intval = POWER_SUPPLY_HEALTH_OVERHEAT;
+ else if (cm->emergency_stop < 0)
+ val->intval = POWER_SUPPLY_HEALTH_COLD;
+ else
+ val->intval = POWER_SUPPLY_HEALTH_GOOD;
+ break;
+ case POWER_SUPPLY_PROP_PRESENT:
+ if (is_batt_present(cm))
+ val->intval = 1;
+ else
+ val->intval = 0;
+ break;
+ case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+ ret = get_batt_uV(cm, &val->intval);
+ break;
+ case POWER_SUPPLY_PROP_CURRENT_NOW:
+ fuel_gauge = power_supply_get_by_name(cm->desc->psy_fuel_gauge);
+ if (!fuel_gauge) {
+ ret = -ENODEV;
+ break;
+ }
+ ret = power_supply_get_property(fuel_gauge,
+ POWER_SUPPLY_PROP_CURRENT_NOW, val);
+ break;
+ case POWER_SUPPLY_PROP_TEMP:
+ return cm_get_battery_temperature(cm, &val->intval);
+ case POWER_SUPPLY_PROP_CAPACITY:
+ if (!is_batt_present(cm)) {
+ /* There is no battery. Assume 100% */
+ val->intval = 100;
+ break;
+ }
+
+ fuel_gauge = power_supply_get_by_name(cm->desc->psy_fuel_gauge);
+ if (!fuel_gauge) {
+ ret = -ENODEV;
+ break;
+ }
+
+ ret = power_supply_get_property(fuel_gauge,
+ POWER_SUPPLY_PROP_CAPACITY, val);
+ if (ret)
+ break;
+
+ if (val->intval > 100) {
+ val->intval = 100;
+ break;
+ }
+ if (val->intval < 0)
+ val->intval = 0;
+
+ /* Do not adjust SOC when charging: voltage is overrated */
+ if (is_charging(cm))
+ break;
+
+ /*
+ * If the capacity value is inconsistent, calibrate it base on
+ * the battery voltage values and the thresholds given as desc
+ */
+ ret = get_batt_uV(cm, &uV);
+ if (ret) {
+ /* Voltage information not available. No calibration */
+ ret = 0;
+ break;
+ }
+
+ if (desc->fullbatt_uV > 0 && uV >= desc->fullbatt_uV &&
+ !is_charging(cm)) {
+ val->intval = 100;
+ break;
+ }
+
+ break;
+ case POWER_SUPPLY_PROP_ONLINE:
+ if (is_ext_pwr_online(cm))
+ val->intval = 1;
+ else
+ val->intval = 0;
+ break;
+ case POWER_SUPPLY_PROP_CHARGE_FULL:
+ case POWER_SUPPLY_PROP_CHARGE_NOW:
+ fuel_gauge = power_supply_get_by_name(cm->desc->psy_fuel_gauge);
+ if (!fuel_gauge) {
+ ret = -ENODEV;
+ break;
+ }
+ ret = power_supply_get_property(fuel_gauge, psp, val);
+ break;
+ default:
+ return -EINVAL;
+ }
+ if (fuel_gauge)
+ power_supply_put(fuel_gauge);
+ return ret;
+}
+
+#define NUM_CHARGER_PSY_OPTIONAL (4)
+static enum power_supply_property default_charger_props[] = {
+ /* Guaranteed to provide */
+ POWER_SUPPLY_PROP_STATUS,
+ POWER_SUPPLY_PROP_HEALTH,
+ POWER_SUPPLY_PROP_PRESENT,
+ POWER_SUPPLY_PROP_VOLTAGE_NOW,
+ POWER_SUPPLY_PROP_CAPACITY,
+ POWER_SUPPLY_PROP_ONLINE,
+ /*
+ * Optional properties are:
+ * POWER_SUPPLY_PROP_CHARGE_FULL,
+ * POWER_SUPPLY_PROP_CHARGE_NOW,
+ * POWER_SUPPLY_PROP_CURRENT_NOW,
+ * POWER_SUPPLY_PROP_TEMP,
+ */
+};
+
+static const struct power_supply_desc psy_default = {
+ .name = "battery",
+ .type = POWER_SUPPLY_TYPE_BATTERY,
+ .properties = default_charger_props,
+ .num_properties = ARRAY_SIZE(default_charger_props),
+ .get_property = charger_get_property,
+ .no_thermal = true,
+};
+
+/**
+ * cm_setup_timer - For in-suspend monitoring setup wakeup alarm
+ * for suspend_again.
+ *
+ * Returns true if the alarm is set for Charger Manager to use.
+ * Returns false if
+ * cm_setup_timer fails to set an alarm,
+ * cm_setup_timer does not need to set an alarm for Charger Manager,
+ * or an alarm previously configured is to be used.
+ */
+static bool cm_setup_timer(void)
+{
+ struct charger_manager *cm;
+ unsigned int wakeup_ms = UINT_MAX;
+ int timer_req = 0;
+
+ if (time_after(next_polling, jiffies))
+ CM_MIN_VALID(wakeup_ms,
+ jiffies_to_msecs(next_polling - jiffies));
+
+ mutex_lock(&cm_list_mtx);
+ list_for_each_entry(cm, &cm_list, entry) {
+ /* Skip if polling is not required for this CM */
+ if (!is_polling_required(cm) && !cm->emergency_stop)
+ continue;
+ timer_req++;
+ if (cm->desc->polling_interval_ms == 0)
+ continue;
+ CM_MIN_VALID(wakeup_ms, cm->desc->polling_interval_ms);
+ }
+ mutex_unlock(&cm_list_mtx);
+
+ if (timer_req && cm_timer) {
+ ktime_t now, add;
+
+ /*
+ * Set alarm with the polling interval (wakeup_ms)
+ * The alarm time should be NOW + CM_RTC_SMALL or later.
+ */
+ if (wakeup_ms == UINT_MAX ||
+ wakeup_ms < CM_RTC_SMALL * MSEC_PER_SEC)
+ wakeup_ms = 2 * CM_RTC_SMALL * MSEC_PER_SEC;
+
+ pr_info("Charger Manager wakeup timer: %u ms\n", wakeup_ms);
+
+ now = ktime_get_boottime();
+ add = ktime_set(wakeup_ms / MSEC_PER_SEC,
+ (wakeup_ms % MSEC_PER_SEC) * NSEC_PER_MSEC);
+ alarm_start(cm_timer, ktime_add(now, add));
+
+ cm_suspend_duration_ms = wakeup_ms;
+
+ return true;
+ }
+ return false;
+}
+
+/**
+ * charger_extcon_work - enable/diable charger according to the state
+ * of charger cable
+ *
+ * @work: work_struct of the function charger_extcon_work.
+ */
+static void charger_extcon_work(struct work_struct *work)
+{
+ struct charger_cable *cable =
+ container_of(work, struct charger_cable, wq);
+ int ret;
+
+ if (cable->attached && cable->min_uA != 0 && cable->max_uA != 0) {
+ ret = regulator_set_current_limit(cable->charger->consumer,
+ cable->min_uA, cable->max_uA);
+ if (ret < 0) {
+ pr_err("Cannot set current limit of %s (%s)\n",
+ cable->charger->regulator_name, cable->name);
+ return;
+ }
+
+ pr_info("Set current limit of %s : %duA ~ %duA\n",
+ cable->charger->regulator_name,
+ cable->min_uA, cable->max_uA);
+ }
+
+ cancel_delayed_work(&cm_monitor_work);
+ queue_delayed_work(cm_wq, &cm_monitor_work, 0);
+}
+
+/**
+ * charger_extcon_notifier - receive the state of charger cable
+ * when registered cable is attached or detached.
+ *
+ * @self: the notifier block of the charger_extcon_notifier.
+ * @event: the cable state.
+ * @ptr: the data pointer of notifier block.
+ */
+static int charger_extcon_notifier(struct notifier_block *self,
+ unsigned long event, void *ptr)
+{
+ struct charger_cable *cable =
+ container_of(self, struct charger_cable, nb);
+
+ /*
+ * The newly state of charger cable.
+ * If cable is attached, cable->attached is true.
+ */
+ cable->attached = event;
+
+ /*
+ * Setup work for controlling charger(regulator)
+ * according to charger cable.
+ */
+ schedule_work(&cable->wq);
+
+ return NOTIFY_DONE;
+}
+
+/**
+ * charger_extcon_init - register external connector to use it
+ * as the charger cable
+ *
+ * @cm: the Charger Manager representing the battery.
+ * @cable: the Charger cable representing the external connector.
+ */
+static int charger_extcon_init(struct charger_manager *cm,
+ struct charger_cable *cable)
+{
+ int ret, i;
+ u64 extcon_type = EXTCON_NONE;
+
+ /*
+ * Charger manager use Extcon framework to identify
+ * the charger cable among various external connector
+ * cable (e.g., TA, USB, MHL, Dock).
+ */
+ INIT_WORK(&cable->wq, charger_extcon_work);
+ cable->nb.notifier_call = charger_extcon_notifier;
+
+ cable->extcon_dev = extcon_get_extcon_dev(cable->extcon_name);
+ if (IS_ERR_OR_NULL(cable->extcon_dev)) {
+ pr_err("Cannot find extcon_dev for %s (cable: %s)\n",
+ cable->extcon_name, cable->name);
+ if (cable->extcon_dev == NULL)
+ return -EPROBE_DEFER;
+ else
+ return PTR_ERR(cable->extcon_dev);
+ }
+
+ for (i = 0; i < ARRAY_SIZE(extcon_mapping); i++) {
+ if (!strcmp(cable->name, extcon_mapping[i].name)) {
+ extcon_type = extcon_mapping[i].extcon_type;
+ break;
+ }
+ }
+ if (extcon_type == EXTCON_NONE) {
+ pr_err("Cannot find cable for type %s", cable->name);
+ return -EINVAL;
+ }
+
+ cable->extcon_type = extcon_type;
+
+ ret = devm_extcon_register_notifier(cm->dev, cable->extcon_dev,
+ cable->extcon_type, &cable->nb);
+ if (ret < 0) {
+ pr_err("Cannot register extcon_dev for %s (cable: %s)\n",
+ cable->extcon_name, cable->name);
+ return ret;
+ }
+
+ return 0;
+}
+
+/**
+ * charger_manager_register_extcon - Register extcon device to receive state
+ * of charger cable.
+ * @cm: the Charger Manager representing the battery.
+ *
+ * This function support EXTCON(External Connector) subsystem to detect the
+ * state of charger cables for enabling or disabling charger(regulator) and
+ * select the charger cable for charging among a number of external cable
+ * according to policy of H/W board.
+ */
+static int charger_manager_register_extcon(struct charger_manager *cm)
+{
+ struct charger_desc *desc = cm->desc;
+ struct charger_regulator *charger;
+ unsigned long event;
+ int ret;
+ int i;
+ int j;
+
+ for (i = 0; i < desc->num_charger_regulators; i++) {
+ charger = &desc->charger_regulators[i];
+
+ charger->consumer = regulator_get(cm->dev,
+ charger->regulator_name);
+ if (IS_ERR(charger->consumer)) {
+ dev_err(cm->dev, "Cannot find charger(%s)\n",
+ charger->regulator_name);
+ return PTR_ERR(charger->consumer);
+ }
+ charger->cm = cm;
+
+ for (j = 0; j < charger->num_cables; j++) {
+ struct charger_cable *cable = &charger->cables[j];
+
+ ret = charger_extcon_init(cm, cable);
+ if (ret < 0) {
+ dev_err(cm->dev, "Cannot initialize charger(%s)\n",
+ charger->regulator_name);
+ return ret;
+ }
+ cable->charger = charger;
+ cable->cm = cm;
+
+ event = extcon_get_state(cable->extcon_dev,
+ cable->extcon_type);
+ charger_extcon_notifier(&cable->nb,
+ event, NULL);
+ }
+ }
+
+ return 0;
+}
+
+/* help function of sysfs node to control charger(regulator) */
+static ssize_t charger_name_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct charger_regulator *charger
+ = container_of(attr, struct charger_regulator, attr_name);
+
+ return sprintf(buf, "%s\n", charger->regulator_name);
+}
+
+static ssize_t charger_state_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct charger_regulator *charger
+ = container_of(attr, struct charger_regulator, attr_state);
+ int state = 0;
+
+ if (!charger->externally_control)
+ state = regulator_is_enabled(charger->consumer);
+
+ return sprintf(buf, "%s\n", state ? "enabled" : "disabled");
+}
+
+static ssize_t charger_externally_control_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct charger_regulator *charger = container_of(attr,
+ struct charger_regulator, attr_externally_control);
+
+ return sprintf(buf, "%d\n", charger->externally_control);
+}
+
+static ssize_t charger_externally_control_store(struct device *dev,
+ struct device_attribute *attr, const char *buf,
+ size_t count)
+{
+ struct charger_regulator *charger
+ = container_of(attr, struct charger_regulator,
+ attr_externally_control);
+ struct charger_manager *cm = charger->cm;
+ struct charger_desc *desc = cm->desc;
+ int i;
+ int ret;
+ int externally_control;
+ int chargers_externally_control = 1;
+
+ ret = sscanf(buf, "%d", &externally_control);
+ if (ret == 0) {
+ ret = -EINVAL;
+ return ret;
+ }
+
+ if (!externally_control) {
+ charger->externally_control = 0;
+ return count;
+ }
+
+ for (i = 0; i < desc->num_charger_regulators; i++) {
+ if (&desc->charger_regulators[i] != charger &&
+ !desc->charger_regulators[i].externally_control) {
+ /*
+ * At least, one charger is controlled by
+ * charger-manager
+ */
+ chargers_externally_control = 0;
+ break;
+ }
+ }
+
+ if (!chargers_externally_control) {
+ if (cm->charger_enabled) {
+ try_charger_enable(charger->cm, false);
+ charger->externally_control = externally_control;
+ try_charger_enable(charger->cm, true);
+ } else {
+ charger->externally_control = externally_control;
+ }
+ } else {
+ dev_warn(cm->dev,
+ "'%s' regulator should be controlled in charger-manager because charger-manager must need at least one charger for charging\n",
+ charger->regulator_name);
+ }
+
+ return count;
+}
+
+/**
+ * charger_manager_prepare_sysfs - Prepare sysfs entry for each charger
+ * @cm: the Charger Manager representing the battery.
+ *
+ * This function add sysfs entry for charger(regulator) to control charger from
+ * user-space. If some development board use one more chargers for charging
+ * but only need one charger on specific case which is dependent on user
+ * scenario or hardware restrictions, the user enter 1 or 0(zero) to '/sys/
+ * class/power_supply/battery/charger.[index]/externally_control'. For example,
+ * if user enter 1 to 'sys/class/power_supply/battery/charger.[index]/
+ * externally_control, this charger isn't controlled from charger-manager and
+ * always stay off state of regulator.
+ */
+static int charger_manager_prepare_sysfs(struct charger_manager *cm)
+{
+ struct charger_desc *desc = cm->desc;
+ struct charger_regulator *charger;
+ int chargers_externally_control = 1;
+ char *name;
+ int i;
+
+ /* Create sysfs entry to control charger(regulator) */
+ for (i = 0; i < desc->num_charger_regulators; i++) {
+ charger = &desc->charger_regulators[i];
+
+ name = devm_kasprintf(cm->dev, GFP_KERNEL, "charger.%d", i);
+ if (!name)
+ return -ENOMEM;
+
+ charger->attrs[0] = &charger->attr_name.attr;
+ charger->attrs[1] = &charger->attr_state.attr;
+ charger->attrs[2] = &charger->attr_externally_control.attr;
+ charger->attrs[3] = NULL;
+
+ charger->attr_grp.name = name;
+ charger->attr_grp.attrs = charger->attrs;
+ desc->sysfs_groups[i] = &charger->attr_grp;
+
+ sysfs_attr_init(&charger->attr_name.attr);
+ charger->attr_name.attr.name = "name";
+ charger->attr_name.attr.mode = 0444;
+ charger->attr_name.show = charger_name_show;
+
+ sysfs_attr_init(&charger->attr_state.attr);
+ charger->attr_state.attr.name = "state";
+ charger->attr_state.attr.mode = 0444;
+ charger->attr_state.show = charger_state_show;
+
+ sysfs_attr_init(&charger->attr_externally_control.attr);
+ charger->attr_externally_control.attr.name
+ = "externally_control";
+ charger->attr_externally_control.attr.mode = 0644;
+ charger->attr_externally_control.show
+ = charger_externally_control_show;
+ charger->attr_externally_control.store
+ = charger_externally_control_store;
+
+ if (!desc->charger_regulators[i].externally_control ||
+ !chargers_externally_control)
+ chargers_externally_control = 0;
+
+ dev_info(cm->dev, "'%s' regulator's externally_control is %d\n",
+ charger->regulator_name, charger->externally_control);
+ }
+
+ if (chargers_externally_control) {
+ dev_err(cm->dev, "Cannot register regulator because charger-manager must need at least one charger for charging battery\n");
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int cm_init_thermal_data(struct charger_manager *cm,
+ struct power_supply *fuel_gauge,
+ enum power_supply_property *properties,
+ size_t *num_properties)
+{
+ struct charger_desc *desc = cm->desc;
+ union power_supply_propval val;
+ int ret;
+
+ /* Verify whether fuel gauge provides battery temperature */
+ ret = power_supply_get_property(fuel_gauge,
+ POWER_SUPPLY_PROP_TEMP, &val);
+
+ if (!ret) {
+ properties[*num_properties] = POWER_SUPPLY_PROP_TEMP;
+ (*num_properties)++;
+ cm->desc->measure_battery_temp = true;
+ }
+#ifdef CONFIG_THERMAL
+ if (ret && desc->thermal_zone) {
+ cm->tzd_batt =
+ thermal_zone_get_zone_by_name(desc->thermal_zone);
+ if (IS_ERR(cm->tzd_batt))
+ return PTR_ERR(cm->tzd_batt);
+
+ /* Use external thermometer */
+ properties[*num_properties] = POWER_SUPPLY_PROP_TEMP;
+ (*num_properties)++;
+ cm->desc->measure_battery_temp = true;
+ ret = 0;
+ }
+#endif
+ if (cm->desc->measure_battery_temp) {
+ /* NOTICE : Default allowable minimum charge temperature is 0 */
+ if (!desc->temp_max)
+ desc->temp_max = CM_DEFAULT_CHARGE_TEMP_MAX;
+ if (!desc->temp_diff)
+ desc->temp_diff = CM_DEFAULT_RECHARGE_TEMP_DIFF;
+ }
+
+ return ret;
+}
+
+static const struct of_device_id charger_manager_match[] = {
+ {
+ .compatible = "charger-manager",
+ },
+ {},
+};
+MODULE_DEVICE_TABLE(of, charger_manager_match);
+
+static struct charger_desc *of_cm_parse_desc(struct device *dev)
+{
+ struct charger_desc *desc;
+ struct device_node *np = dev->of_node;
+ u32 poll_mode = CM_POLL_DISABLE;
+ u32 battery_stat = CM_NO_BATTERY;
+ int num_chgs = 0;
+
+ desc = devm_kzalloc(dev, sizeof(*desc), GFP_KERNEL);
+ if (!desc)
+ return ERR_PTR(-ENOMEM);
+
+ of_property_read_string(np, "cm-name", &desc->psy_name);
+
+ of_property_read_u32(np, "cm-poll-mode", &poll_mode);
+ desc->polling_mode = poll_mode;
+
+ of_property_read_u32(np, "cm-poll-interval",
+ &desc->polling_interval_ms);
+
+ of_property_read_u32(np, "cm-fullbatt-vchkdrop-volt",
+ &desc->fullbatt_vchkdrop_uV);
+ of_property_read_u32(np, "cm-fullbatt-voltage", &desc->fullbatt_uV);
+ of_property_read_u32(np, "cm-fullbatt-soc", &desc->fullbatt_soc);
+ of_property_read_u32(np, "cm-fullbatt-capacity",
+ &desc->fullbatt_full_capacity);
+
+ of_property_read_u32(np, "cm-battery-stat", &battery_stat);
+ desc->battery_present = battery_stat;
+
+ /* chargers */
+ num_chgs = of_property_count_strings(np, "cm-chargers");
+ if (num_chgs > 0) {
+ int i;
+
+ /* Allocate empty bin at the tail of array */
+ desc->psy_charger_stat = devm_kcalloc(dev,
+ num_chgs + 1,
+ sizeof(char *),
+ GFP_KERNEL);
+ if (!desc->psy_charger_stat)
+ return ERR_PTR(-ENOMEM);
+
+ for (i = 0; i < num_chgs; i++)
+ of_property_read_string_index(np, "cm-chargers",
+ i, &desc->psy_charger_stat[i]);
+ }
+
+ of_property_read_string(np, "cm-fuel-gauge", &desc->psy_fuel_gauge);
+
+ of_property_read_string(np, "cm-thermal-zone", &desc->thermal_zone);
+
+ of_property_read_u32(np, "cm-battery-cold", &desc->temp_min);
+ if (of_get_property(np, "cm-battery-cold-in-minus", NULL))
+ desc->temp_min *= -1;
+ of_property_read_u32(np, "cm-battery-hot", &desc->temp_max);
+ of_property_read_u32(np, "cm-battery-temp-diff", &desc->temp_diff);
+
+ of_property_read_u32(np, "cm-charging-max",
+ &desc->charging_max_duration_ms);
+ of_property_read_u32(np, "cm-discharging-max",
+ &desc->discharging_max_duration_ms);
+
+ /* battery charger regulators */
+ desc->num_charger_regulators = of_get_child_count(np);
+ if (desc->num_charger_regulators) {
+ struct charger_regulator *chg_regs;
+ struct device_node *child;
+
+ chg_regs = devm_kcalloc(dev,
+ desc->num_charger_regulators,
+ sizeof(*chg_regs),
+ GFP_KERNEL);
+ if (!chg_regs)
+ return ERR_PTR(-ENOMEM);
+
+ desc->charger_regulators = chg_regs;
+
+ desc->sysfs_groups = devm_kcalloc(dev,
+ desc->num_charger_regulators + 1,
+ sizeof(*desc->sysfs_groups),
+ GFP_KERNEL);
+ if (!desc->sysfs_groups)
+ return ERR_PTR(-ENOMEM);
+
+ for_each_child_of_node(np, child) {
+ struct charger_cable *cables;
+ struct device_node *_child;
+
+ of_property_read_string(child, "cm-regulator-name",
+ &chg_regs->regulator_name);
+
+ /* charger cables */
+ chg_regs->num_cables = of_get_child_count(child);
+ if (chg_regs->num_cables) {
+ cables = devm_kcalloc(dev,
+ chg_regs->num_cables,
+ sizeof(*cables),
+ GFP_KERNEL);
+ if (!cables) {
+ of_node_put(child);
+ return ERR_PTR(-ENOMEM);
+ }
+
+ chg_regs->cables = cables;
+
+ for_each_child_of_node(child, _child) {
+ of_property_read_string(_child,
+ "cm-cable-name", &cables->name);
+ of_property_read_string(_child,
+ "cm-cable-extcon",
+ &cables->extcon_name);
+ of_property_read_u32(_child,
+ "cm-cable-min",
+ &cables->min_uA);
+ of_property_read_u32(_child,
+ "cm-cable-max",
+ &cables->max_uA);
+ cables++;
+ }
+ }
+ chg_regs++;
+ }
+ }
+ return desc;
+}
+
+static inline struct charger_desc *cm_get_drv_data(struct platform_device *pdev)
+{
+ if (pdev->dev.of_node)
+ return of_cm_parse_desc(&pdev->dev);
+ return dev_get_platdata(&pdev->dev);
+}
+
+static enum alarmtimer_restart cm_timer_func(struct alarm *alarm, ktime_t now)
+{
+ cm_timer_set = false;
+ return ALARMTIMER_NORESTART;
+}
+
+static int charger_manager_probe(struct platform_device *pdev)
+{
+ struct charger_desc *desc = cm_get_drv_data(pdev);
+ struct charger_manager *cm;
+ int ret, i = 0;
+ union power_supply_propval val;
+ struct power_supply *fuel_gauge;
+ enum power_supply_property *properties;
+ size_t num_properties;
+ struct power_supply_config psy_cfg = {};
+
+ if (IS_ERR(desc)) {
+ dev_err(&pdev->dev, "No platform data (desc) found\n");
+ return PTR_ERR(desc);
+ }
+
+ cm = devm_kzalloc(&pdev->dev, sizeof(*cm), GFP_KERNEL);
+ if (!cm)
+ return -ENOMEM;
+
+ /* Basic Values. Unspecified are Null or 0 */
+ cm->dev = &pdev->dev;
+ cm->desc = desc;
+ psy_cfg.drv_data = cm;
+
+ /* Initialize alarm timer */
+ if (alarmtimer_get_rtcdev()) {
+ cm_timer = devm_kzalloc(cm->dev, sizeof(*cm_timer), GFP_KERNEL);
+ if (!cm_timer)
+ return -ENOMEM;
+ alarm_init(cm_timer, ALARM_BOOTTIME, cm_timer_func);
+ }
+
+ /*
+ * Some of the following do not need to be errors.
+ * Users may intentionally ignore those features.
+ */
+ if (desc->fullbatt_uV == 0) {
+ dev_info(&pdev->dev, "Ignoring full-battery voltage threshold as it is not supplied\n");
+ }
+ if (!desc->fullbatt_vchkdrop_uV) {
+ dev_info(&pdev->dev, "Disabling full-battery voltage drop checking mechanism as it is not supplied\n");
+ desc->fullbatt_vchkdrop_uV = 0;
+ }
+ if (desc->fullbatt_soc == 0) {
+ dev_info(&pdev->dev, "Ignoring full-battery soc(state of charge) threshold as it is not supplied\n");
+ }
+ if (desc->fullbatt_full_capacity == 0) {
+ dev_info(&pdev->dev, "Ignoring full-battery full capacity threshold as it is not supplied\n");
+ }
+
+ if (!desc->charger_regulators || desc->num_charger_regulators < 1) {
+ dev_err(&pdev->dev, "charger_regulators undefined\n");
+ return -EINVAL;
+ }
+
+ if (!desc->psy_charger_stat || !desc->psy_charger_stat[0]) {
+ dev_err(&pdev->dev, "No power supply defined\n");
+ return -EINVAL;
+ }
+
+ if (!desc->psy_fuel_gauge) {
+ dev_err(&pdev->dev, "No fuel gauge power supply defined\n");
+ return -EINVAL;
+ }
+
+ /* Check if charger's supplies are present at probe */
+ for (i = 0; desc->psy_charger_stat[i]; i++) {
+ struct power_supply *psy;
+
+ psy = power_supply_get_by_name(desc->psy_charger_stat[i]);
+ if (!psy) {
+ dev_err(&pdev->dev, "Cannot find power supply \"%s\"\n",
+ desc->psy_charger_stat[i]);
+ return -ENODEV;
+ }
+ power_supply_put(psy);
+ }
+
+ if (cm->desc->polling_mode != CM_POLL_DISABLE &&
+ (desc->polling_interval_ms == 0 ||
+ msecs_to_jiffies(desc->polling_interval_ms) <= CM_JIFFIES_SMALL)) {
+ dev_err(&pdev->dev, "polling_interval_ms is too small\n");
+ return -EINVAL;
+ }
+
+ if (!desc->charging_max_duration_ms ||
+ !desc->discharging_max_duration_ms) {
+ dev_info(&pdev->dev, "Cannot limit charging duration checking mechanism to prevent overcharge/overheat and control discharging duration\n");
+ desc->charging_max_duration_ms = 0;
+ desc->discharging_max_duration_ms = 0;
+ }
+
+ platform_set_drvdata(pdev, cm);
+
+ memcpy(&cm->charger_psy_desc, &psy_default, sizeof(psy_default));
+
+ if (!desc->psy_name)
+ strncpy(cm->psy_name_buf, psy_default.name, PSY_NAME_MAX);
+ else
+ strncpy(cm->psy_name_buf, desc->psy_name, PSY_NAME_MAX);
+ cm->charger_psy_desc.name = cm->psy_name_buf;
+
+ /* Allocate for psy properties because they may vary */
+ properties = devm_kcalloc(&pdev->dev,
+ ARRAY_SIZE(default_charger_props) +
+ NUM_CHARGER_PSY_OPTIONAL,
+ sizeof(*properties), GFP_KERNEL);
+ if (!properties)
+ return -ENOMEM;
+
+ memcpy(properties, default_charger_props,
+ sizeof(enum power_supply_property) *
+ ARRAY_SIZE(default_charger_props));
+ num_properties = ARRAY_SIZE(default_charger_props);
+
+ /* Find which optional psy-properties are available */
+ fuel_gauge = power_supply_get_by_name(desc->psy_fuel_gauge);
+ if (!fuel_gauge) {
+ dev_err(&pdev->dev, "Cannot find power supply \"%s\"\n",
+ desc->psy_fuel_gauge);
+ return -ENODEV;
+ }
+ if (!power_supply_get_property(fuel_gauge,
+ POWER_SUPPLY_PROP_CHARGE_FULL, &val)) {
+ properties[num_properties] =
+ POWER_SUPPLY_PROP_CHARGE_FULL;
+ num_properties++;
+ }
+ if (!power_supply_get_property(fuel_gauge,
+ POWER_SUPPLY_PROP_CHARGE_NOW, &val)) {
+ properties[num_properties] =
+ POWER_SUPPLY_PROP_CHARGE_NOW;
+ num_properties++;
+ }
+ if (!power_supply_get_property(fuel_gauge,
+ POWER_SUPPLY_PROP_CURRENT_NOW,
+ &val)) {
+ properties[num_properties] =
+ POWER_SUPPLY_PROP_CURRENT_NOW;
+ num_properties++;
+ }
+
+ ret = cm_init_thermal_data(cm, fuel_gauge, properties, &num_properties);
+ if (ret) {
+ dev_err(&pdev->dev, "Failed to initialize thermal data\n");
+ cm->desc->measure_battery_temp = false;
+ }
+ power_supply_put(fuel_gauge);
+
+ cm->charger_psy_desc.properties = properties;
+ cm->charger_psy_desc.num_properties = num_properties;
+
+ /* Register sysfs entry for charger(regulator) */
+ ret = charger_manager_prepare_sysfs(cm);
+ if (ret < 0) {
+ dev_err(&pdev->dev,
+ "Cannot prepare sysfs entry of regulators\n");
+ return ret;
+ }
+ psy_cfg.attr_grp = desc->sysfs_groups;
+
+ cm->charger_psy = power_supply_register(&pdev->dev,
+ &cm->charger_psy_desc,
+ &psy_cfg);
+ if (IS_ERR(cm->charger_psy)) {
+ dev_err(&pdev->dev, "Cannot register charger-manager with name \"%s\"\n",
+ cm->charger_psy_desc.name);
+ return PTR_ERR(cm->charger_psy);
+ }
+
+ /* Register extcon device for charger cable */
+ ret = charger_manager_register_extcon(cm);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "Cannot initialize extcon device\n");
+ goto err_reg_extcon;
+ }
+
+ /* Add to the list */
+ mutex_lock(&cm_list_mtx);
+ list_add(&cm->entry, &cm_list);
+ mutex_unlock(&cm_list_mtx);
+
+ /*
+ * Charger-manager is capable of waking up the systme from sleep
+ * when event is happened through cm_notify_event()
+ */
+ device_init_wakeup(&pdev->dev, true);
+ device_set_wakeup_capable(&pdev->dev, false);
+
+ /*
+ * Charger-manager have to check the charging state right after
+ * initialization of charger-manager and then update current charging
+ * state.
+ */
+ cm_monitor();
+
+ schedule_work(&setup_polling);
+
+ return 0;
+
+err_reg_extcon:
+ for (i = 0; i < desc->num_charger_regulators; i++)
+ regulator_put(desc->charger_regulators[i].consumer);
+
+ power_supply_unregister(cm->charger_psy);
+
+ return ret;
+}
+
+static int charger_manager_remove(struct platform_device *pdev)
+{
+ struct charger_manager *cm = platform_get_drvdata(pdev);
+ struct charger_desc *desc = cm->desc;
+ int i = 0;
+
+ /* Remove from the list */
+ mutex_lock(&cm_list_mtx);
+ list_del(&cm->entry);
+ mutex_unlock(&cm_list_mtx);
+
+ cancel_work_sync(&setup_polling);
+ cancel_delayed_work_sync(&cm_monitor_work);
+
+ for (i = 0 ; i < desc->num_charger_regulators ; i++)
+ regulator_put(desc->charger_regulators[i].consumer);
+
+ power_supply_unregister(cm->charger_psy);
+
+ try_charger_enable(cm, false);
+
+ return 0;
+}
+
+static const struct platform_device_id charger_manager_id[] = {
+ { "charger-manager", 0 },
+ { },
+};
+MODULE_DEVICE_TABLE(platform, charger_manager_id);
+
+static int cm_suspend_noirq(struct device *dev)
+{
+ if (device_may_wakeup(dev)) {
+ device_set_wakeup_capable(dev, false);
+ return -EAGAIN;
+ }
+
+ return 0;
+}
+
+static bool cm_need_to_awake(void)
+{
+ struct charger_manager *cm;
+
+ if (cm_timer)
+ return false;
+
+ mutex_lock(&cm_list_mtx);
+ list_for_each_entry(cm, &cm_list, entry) {
+ if (is_charging(cm)) {
+ mutex_unlock(&cm_list_mtx);
+ return true;
+ }
+ }
+ mutex_unlock(&cm_list_mtx);
+
+ return false;
+}
+
+static int cm_suspend_prepare(struct device *dev)
+{
+ if (cm_need_to_awake())
+ return -EBUSY;
+
+ if (!cm_suspended)
+ cm_suspended = true;
+
+ cm_timer_set = cm_setup_timer();
+
+ if (cm_timer_set) {
+ cancel_work_sync(&setup_polling);
+ cancel_delayed_work_sync(&cm_monitor_work);
+ }
+
+ return 0;
+}
+
+static void cm_suspend_complete(struct device *dev)
+{
+ struct charger_manager *cm = dev_get_drvdata(dev);
+
+ if (cm_suspended)
+ cm_suspended = false;
+
+ if (cm_timer_set) {
+ ktime_t remain;
+
+ alarm_cancel(cm_timer);
+ cm_timer_set = false;
+ remain = alarm_expires_remaining(cm_timer);
+ cm_suspend_duration_ms -= ktime_to_ms(remain);
+ schedule_work(&setup_polling);
+ }
+
+ _cm_monitor(cm);
+
+ device_set_wakeup_capable(cm->dev, false);
+}
+
+static const struct dev_pm_ops charger_manager_pm = {
+ .prepare = cm_suspend_prepare,
+ .suspend_noirq = cm_suspend_noirq,
+ .complete = cm_suspend_complete,
+};
+
+static struct platform_driver charger_manager_driver = {
+ .driver = {
+ .name = "charger-manager",
+ .pm = &charger_manager_pm,
+ .of_match_table = charger_manager_match,
+ },
+ .probe = charger_manager_probe,
+ .remove = charger_manager_remove,
+ .id_table = charger_manager_id,
+};
+
+static int __init charger_manager_init(void)
+{
+ cm_wq = create_freezable_workqueue("charger_manager");
+ if (unlikely(!cm_wq))
+ return -ENOMEM;
+
+ INIT_DELAYED_WORK(&cm_monitor_work, cm_monitor_poller);
+
+ return platform_driver_register(&charger_manager_driver);
+}
+late_initcall(charger_manager_init);
+
+static void __exit charger_manager_cleanup(void)
+{
+ destroy_workqueue(cm_wq);
+ cm_wq = NULL;
+
+ platform_driver_unregister(&charger_manager_driver);
+}
+module_exit(charger_manager_cleanup);
+
+MODULE_AUTHOR("MyungJoo Ham <myungjoo.ham@samsung.com>");
+MODULE_DESCRIPTION("Charger Manager");
+MODULE_LICENSE("GPL");
diff --git a/drivers/power/supply/collie_battery.c b/drivers/power/supply/collie_battery.c
new file mode 100644
index 000000000..cbd588e9e
--- /dev/null
+++ b/drivers/power/supply/collie_battery.c
@@ -0,0 +1,418 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Battery and Power Management code for the Sharp SL-5x00
+ *
+ * Copyright (C) 2009 Thomas Kunze
+ *
+ * based on tosa_battery.c
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/power_supply.h>
+#include <linux/delay.h>
+#include <linux/spinlock.h>
+#include <linux/interrupt.h>
+#include <linux/gpio.h>
+#include <linux/mfd/ucb1x00.h>
+
+#include <asm/mach/sharpsl_param.h>
+#include <asm/mach-types.h>
+#include <mach/collie.h>
+
+static DEFINE_MUTEX(bat_lock); /* protects gpio pins */
+static struct work_struct bat_work;
+static struct ucb1x00 *ucb;
+
+struct collie_bat {
+ int status;
+ struct power_supply *psy;
+ int full_chrg;
+
+ struct mutex work_lock; /* protects data */
+
+ bool (*is_present)(struct collie_bat *bat);
+ int gpio_full;
+ int gpio_charge_on;
+
+ int technology;
+
+ int gpio_bat;
+ int adc_bat;
+ int adc_bat_divider;
+ int bat_max;
+ int bat_min;
+
+ int gpio_temp;
+ int adc_temp;
+ int adc_temp_divider;
+};
+
+static struct collie_bat collie_bat_main;
+
+static unsigned long collie_read_bat(struct collie_bat *bat)
+{
+ unsigned long value = 0;
+
+ if (bat->gpio_bat < 0 || bat->adc_bat < 0)
+ return 0;
+ mutex_lock(&bat_lock);
+ gpio_set_value(bat->gpio_bat, 1);
+ msleep(5);
+ ucb1x00_adc_enable(ucb);
+ value = ucb1x00_adc_read(ucb, bat->adc_bat, UCB_SYNC);
+ ucb1x00_adc_disable(ucb);
+ gpio_set_value(bat->gpio_bat, 0);
+ mutex_unlock(&bat_lock);
+ value = value * 1000000 / bat->adc_bat_divider;
+
+ return value;
+}
+
+static unsigned long collie_read_temp(struct collie_bat *bat)
+{
+ unsigned long value = 0;
+ if (bat->gpio_temp < 0 || bat->adc_temp < 0)
+ return 0;
+
+ mutex_lock(&bat_lock);
+ gpio_set_value(bat->gpio_temp, 1);
+ msleep(5);
+ ucb1x00_adc_enable(ucb);
+ value = ucb1x00_adc_read(ucb, bat->adc_temp, UCB_SYNC);
+ ucb1x00_adc_disable(ucb);
+ gpio_set_value(bat->gpio_temp, 0);
+ mutex_unlock(&bat_lock);
+
+ value = value * 10000 / bat->adc_temp_divider;
+
+ return value;
+}
+
+static int collie_bat_get_property(struct power_supply *psy,
+ enum power_supply_property psp,
+ union power_supply_propval *val)
+{
+ int ret = 0;
+ struct collie_bat *bat = power_supply_get_drvdata(psy);
+
+ if (bat->is_present && !bat->is_present(bat)
+ && psp != POWER_SUPPLY_PROP_PRESENT) {
+ return -ENODEV;
+ }
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_STATUS:
+ val->intval = bat->status;
+ break;
+ case POWER_SUPPLY_PROP_TECHNOLOGY:
+ val->intval = bat->technology;
+ break;
+ case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+ val->intval = collie_read_bat(bat);
+ break;
+ case POWER_SUPPLY_PROP_VOLTAGE_MAX:
+ if (bat->full_chrg == -1)
+ val->intval = bat->bat_max;
+ else
+ val->intval = bat->full_chrg;
+ break;
+ case POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN:
+ val->intval = bat->bat_max;
+ break;
+ case POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN:
+ val->intval = bat->bat_min;
+ break;
+ case POWER_SUPPLY_PROP_TEMP:
+ val->intval = collie_read_temp(bat);
+ break;
+ case POWER_SUPPLY_PROP_PRESENT:
+ val->intval = bat->is_present ? bat->is_present(bat) : 1;
+ break;
+ default:
+ ret = -EINVAL;
+ break;
+ }
+ return ret;
+}
+
+static void collie_bat_external_power_changed(struct power_supply *psy)
+{
+ schedule_work(&bat_work);
+}
+
+static irqreturn_t collie_bat_gpio_isr(int irq, void *data)
+{
+ pr_info("collie_bat_gpio irq\n");
+ schedule_work(&bat_work);
+ return IRQ_HANDLED;
+}
+
+static void collie_bat_update(struct collie_bat *bat)
+{
+ int old;
+ struct power_supply *psy = bat->psy;
+
+ mutex_lock(&bat->work_lock);
+
+ old = bat->status;
+
+ if (bat->is_present && !bat->is_present(bat)) {
+ printk(KERN_NOTICE "%s not present\n", psy->desc->name);
+ bat->status = POWER_SUPPLY_STATUS_UNKNOWN;
+ bat->full_chrg = -1;
+ } else if (power_supply_am_i_supplied(psy)) {
+ if (bat->status == POWER_SUPPLY_STATUS_DISCHARGING) {
+ gpio_set_value(bat->gpio_charge_on, 1);
+ mdelay(15);
+ }
+
+ if (gpio_get_value(bat->gpio_full)) {
+ if (old == POWER_SUPPLY_STATUS_CHARGING ||
+ bat->full_chrg == -1)
+ bat->full_chrg = collie_read_bat(bat);
+
+ gpio_set_value(bat->gpio_charge_on, 0);
+ bat->status = POWER_SUPPLY_STATUS_FULL;
+ } else {
+ gpio_set_value(bat->gpio_charge_on, 1);
+ bat->status = POWER_SUPPLY_STATUS_CHARGING;
+ }
+ } else {
+ gpio_set_value(bat->gpio_charge_on, 0);
+ bat->status = POWER_SUPPLY_STATUS_DISCHARGING;
+ }
+
+ if (old != bat->status)
+ power_supply_changed(psy);
+
+ mutex_unlock(&bat->work_lock);
+}
+
+static void collie_bat_work(struct work_struct *work)
+{
+ collie_bat_update(&collie_bat_main);
+}
+
+
+static enum power_supply_property collie_bat_main_props[] = {
+ POWER_SUPPLY_PROP_STATUS,
+ POWER_SUPPLY_PROP_TECHNOLOGY,
+ POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN,
+ POWER_SUPPLY_PROP_VOLTAGE_NOW,
+ POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN,
+ POWER_SUPPLY_PROP_VOLTAGE_MAX,
+ POWER_SUPPLY_PROP_PRESENT,
+ POWER_SUPPLY_PROP_TEMP,
+};
+
+static enum power_supply_property collie_bat_bu_props[] = {
+ POWER_SUPPLY_PROP_STATUS,
+ POWER_SUPPLY_PROP_TECHNOLOGY,
+ POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN,
+ POWER_SUPPLY_PROP_VOLTAGE_NOW,
+ POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN,
+ POWER_SUPPLY_PROP_VOLTAGE_MAX,
+ POWER_SUPPLY_PROP_PRESENT,
+};
+
+static const struct power_supply_desc collie_bat_main_desc = {
+ .name = "main-battery",
+ .type = POWER_SUPPLY_TYPE_BATTERY,
+ .properties = collie_bat_main_props,
+ .num_properties = ARRAY_SIZE(collie_bat_main_props),
+ .get_property = collie_bat_get_property,
+ .external_power_changed = collie_bat_external_power_changed,
+ .use_for_apm = 1,
+};
+
+static struct collie_bat collie_bat_main = {
+ .status = POWER_SUPPLY_STATUS_DISCHARGING,
+ .full_chrg = -1,
+ .psy = NULL,
+
+ .gpio_full = COLLIE_GPIO_CO,
+ .gpio_charge_on = COLLIE_GPIO_CHARGE_ON,
+
+ .technology = POWER_SUPPLY_TECHNOLOGY_LIPO,
+
+ .gpio_bat = COLLIE_GPIO_MBAT_ON,
+ .adc_bat = UCB_ADC_INP_AD1,
+ .adc_bat_divider = 155,
+ .bat_max = 4310000,
+ .bat_min = 1551 * 1000000 / 414,
+
+ .gpio_temp = COLLIE_GPIO_TMP_ON,
+ .adc_temp = UCB_ADC_INP_AD0,
+ .adc_temp_divider = 10000,
+};
+
+static const struct power_supply_desc collie_bat_bu_desc = {
+ .name = "backup-battery",
+ .type = POWER_SUPPLY_TYPE_BATTERY,
+ .properties = collie_bat_bu_props,
+ .num_properties = ARRAY_SIZE(collie_bat_bu_props),
+ .get_property = collie_bat_get_property,
+ .external_power_changed = collie_bat_external_power_changed,
+};
+
+static struct collie_bat collie_bat_bu = {
+ .status = POWER_SUPPLY_STATUS_UNKNOWN,
+ .full_chrg = -1,
+ .psy = NULL,
+
+ .gpio_full = -1,
+ .gpio_charge_on = -1,
+
+ .technology = POWER_SUPPLY_TECHNOLOGY_LiMn,
+
+ .gpio_bat = COLLIE_GPIO_BBAT_ON,
+ .adc_bat = UCB_ADC_INP_AD1,
+ .adc_bat_divider = 155,
+ .bat_max = 3000000,
+ .bat_min = 1900000,
+
+ .gpio_temp = -1,
+ .adc_temp = -1,
+ .adc_temp_divider = -1,
+};
+
+static struct gpio collie_batt_gpios[] = {
+ { COLLIE_GPIO_CO, GPIOF_IN, "main battery full" },
+ { COLLIE_GPIO_MAIN_BAT_LOW, GPIOF_IN, "main battery low" },
+ { COLLIE_GPIO_CHARGE_ON, GPIOF_OUT_INIT_LOW, "main charge on" },
+ { COLLIE_GPIO_MBAT_ON, GPIOF_OUT_INIT_LOW, "main battery" },
+ { COLLIE_GPIO_TMP_ON, GPIOF_OUT_INIT_LOW, "main battery temp" },
+ { COLLIE_GPIO_BBAT_ON, GPIOF_OUT_INIT_LOW, "backup battery" },
+};
+
+#ifdef CONFIG_PM
+static int wakeup_enabled;
+
+static int collie_bat_suspend(struct ucb1x00_dev *dev)
+{
+ /* flush all pending status updates */
+ flush_work(&bat_work);
+
+ if (device_may_wakeup(&dev->ucb->dev) &&
+ collie_bat_main.status == POWER_SUPPLY_STATUS_CHARGING)
+ wakeup_enabled = !enable_irq_wake(gpio_to_irq(COLLIE_GPIO_CO));
+ else
+ wakeup_enabled = 0;
+
+ return 0;
+}
+
+static int collie_bat_resume(struct ucb1x00_dev *dev)
+{
+ if (wakeup_enabled)
+ disable_irq_wake(gpio_to_irq(COLLIE_GPIO_CO));
+
+ /* things may have changed while we were away */
+ schedule_work(&bat_work);
+ return 0;
+}
+#else
+#define collie_bat_suspend NULL
+#define collie_bat_resume NULL
+#endif
+
+static int collie_bat_probe(struct ucb1x00_dev *dev)
+{
+ int ret;
+ struct power_supply_config psy_main_cfg = {}, psy_bu_cfg = {};
+
+ if (!machine_is_collie())
+ return -ENODEV;
+
+ ucb = dev->ucb;
+
+ ret = gpio_request_array(collie_batt_gpios,
+ ARRAY_SIZE(collie_batt_gpios));
+ if (ret)
+ return ret;
+
+ mutex_init(&collie_bat_main.work_lock);
+
+ INIT_WORK(&bat_work, collie_bat_work);
+
+ psy_main_cfg.drv_data = &collie_bat_main;
+ collie_bat_main.psy = power_supply_register(&dev->ucb->dev,
+ &collie_bat_main_desc,
+ &psy_main_cfg);
+ if (IS_ERR(collie_bat_main.psy)) {
+ ret = PTR_ERR(collie_bat_main.psy);
+ goto err_psy_reg_main;
+ }
+
+ psy_bu_cfg.drv_data = &collie_bat_bu;
+ collie_bat_bu.psy = power_supply_register(&dev->ucb->dev,
+ &collie_bat_bu_desc,
+ &psy_bu_cfg);
+ if (IS_ERR(collie_bat_bu.psy)) {
+ ret = PTR_ERR(collie_bat_bu.psy);
+ goto err_psy_reg_bu;
+ }
+
+ ret = request_irq(gpio_to_irq(COLLIE_GPIO_CO),
+ collie_bat_gpio_isr,
+ IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
+ "main full", &collie_bat_main);
+ if (ret)
+ goto err_irq;
+
+ device_init_wakeup(&ucb->dev, 1);
+ schedule_work(&bat_work);
+
+ return 0;
+
+err_irq:
+ power_supply_unregister(collie_bat_bu.psy);
+err_psy_reg_bu:
+ power_supply_unregister(collie_bat_main.psy);
+err_psy_reg_main:
+
+ /* see comment in collie_bat_remove */
+ cancel_work_sync(&bat_work);
+ gpio_free_array(collie_batt_gpios, ARRAY_SIZE(collie_batt_gpios));
+ return ret;
+}
+
+static void collie_bat_remove(struct ucb1x00_dev *dev)
+{
+ free_irq(gpio_to_irq(COLLIE_GPIO_CO), &collie_bat_main);
+
+ power_supply_unregister(collie_bat_bu.psy);
+ power_supply_unregister(collie_bat_main.psy);
+
+ /*
+ * Now cancel the bat_work. We won't get any more schedules,
+ * since all sources (isr and external_power_changed) are
+ * unregistered now.
+ */
+ cancel_work_sync(&bat_work);
+ gpio_free_array(collie_batt_gpios, ARRAY_SIZE(collie_batt_gpios));
+}
+
+static struct ucb1x00_driver collie_bat_driver = {
+ .add = collie_bat_probe,
+ .remove = collie_bat_remove,
+ .suspend = collie_bat_suspend,
+ .resume = collie_bat_resume,
+};
+
+static int __init collie_bat_init(void)
+{
+ return ucb1x00_register_driver(&collie_bat_driver);
+}
+
+static void __exit collie_bat_exit(void)
+{
+ ucb1x00_unregister_driver(&collie_bat_driver);
+}
+
+module_init(collie_bat_init);
+module_exit(collie_bat_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Thomas Kunze");
+MODULE_DESCRIPTION("Collie battery driver");
diff --git a/drivers/power/supply/cpcap-battery.c b/drivers/power/supply/cpcap-battery.c
new file mode 100644
index 000000000..793d4ca52
--- /dev/null
+++ b/drivers/power/supply/cpcap-battery.c
@@ -0,0 +1,957 @@
+/*
+ * Battery driver for CPCAP PMIC
+ *
+ * Copyright (C) 2017 Tony Lindgren <tony@atomide.com>
+ *
+ * Some parts of the code based on earlie Motorola mapphone Linux kernel
+ * drivers:
+ *
+ * Copyright (C) 2009-2010 Motorola, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/power_supply.h>
+#include <linux/reboot.h>
+#include <linux/regmap.h>
+
+#include <linux/iio/consumer.h>
+#include <linux/iio/types.h>
+#include <linux/mfd/motorola-cpcap.h>
+
+/*
+ * Register bit defines for CPCAP_REG_BPEOL. Some of these seem to
+ * map to MC13783UG.pdf "Table 5-19. Register 13, Power Control 0"
+ * to enable BATTDETEN, LOBAT and EOL features. We currently use
+ * LOBAT interrupts instead of EOL.
+ */
+#define CPCAP_REG_BPEOL_BIT_EOL9 BIT(9) /* Set for EOL irq */
+#define CPCAP_REG_BPEOL_BIT_EOL8 BIT(8) /* Set for EOL irq */
+#define CPCAP_REG_BPEOL_BIT_UNKNOWN7 BIT(7)
+#define CPCAP_REG_BPEOL_BIT_UNKNOWN6 BIT(6)
+#define CPCAP_REG_BPEOL_BIT_UNKNOWN5 BIT(5)
+#define CPCAP_REG_BPEOL_BIT_EOL_MULTI BIT(4) /* Set for multiple EOL irqs */
+#define CPCAP_REG_BPEOL_BIT_UNKNOWN3 BIT(3)
+#define CPCAP_REG_BPEOL_BIT_UNKNOWN2 BIT(2)
+#define CPCAP_REG_BPEOL_BIT_BATTDETEN BIT(1) /* Enable battery detect */
+#define CPCAP_REG_BPEOL_BIT_EOLSEL BIT(0) /* BPDET = 0, EOL = 1 */
+
+/*
+ * Register bit defines for CPCAP_REG_CCC1. These seem similar to the twl6030
+ * coulomb counter registers rather than the mc13892 registers. Both twl6030
+ * and mc13892 set bits 2 and 1 to reset and clear registers. But mc13892
+ * sets bit 0 to start the coulomb counter while twl6030 sets bit 0 to stop
+ * the coulomb counter like cpcap does. So for now, we use the twl6030 style
+ * naming for the registers.
+ */
+#define CPCAP_REG_CCC1_ACTIVE_MODE1 BIT(4) /* Update rate */
+#define CPCAP_REG_CCC1_ACTIVE_MODE0 BIT(3) /* Update rate */
+#define CPCAP_REG_CCC1_AUTOCLEAR BIT(2) /* Resets sample registers */
+#define CPCAP_REG_CCC1_CAL_EN BIT(1) /* Clears after write in 1s */
+#define CPCAP_REG_CCC1_PAUSE BIT(0) /* Stop counters, allow write */
+#define CPCAP_REG_CCC1_RESET_MASK (CPCAP_REG_CCC1_AUTOCLEAR | \
+ CPCAP_REG_CCC1_CAL_EN)
+
+#define CPCAP_REG_CCCC2_RATE1 BIT(5)
+#define CPCAP_REG_CCCC2_RATE0 BIT(4)
+#define CPCAP_REG_CCCC2_ENABLE BIT(3)
+
+#define CPCAP_BATTERY_CC_SAMPLE_PERIOD_MS 250
+
+enum {
+ CPCAP_BATTERY_IIO_BATTDET,
+ CPCAP_BATTERY_IIO_VOLTAGE,
+ CPCAP_BATTERY_IIO_CHRG_CURRENT,
+ CPCAP_BATTERY_IIO_BATT_CURRENT,
+ CPCAP_BATTERY_IIO_NR,
+};
+
+enum cpcap_battery_irq_action {
+ CPCAP_BATTERY_IRQ_ACTION_NONE,
+ CPCAP_BATTERY_IRQ_ACTION_CC_CAL_DONE,
+ CPCAP_BATTERY_IRQ_ACTION_BATTERY_LOW,
+ CPCAP_BATTERY_IRQ_ACTION_POWEROFF,
+};
+
+struct cpcap_interrupt_desc {
+ const char *name;
+ struct list_head node;
+ int irq;
+ enum cpcap_battery_irq_action action;
+};
+
+struct cpcap_battery_config {
+ int cd_factor;
+ struct power_supply_info info;
+ struct power_supply_battery_info bat;
+};
+
+struct cpcap_coulomb_counter_data {
+ s32 sample; /* 24 or 32 bits */
+ s32 accumulator;
+ s16 offset; /* 9 bits */
+ s16 integrator; /* 13 or 16 bits */
+};
+
+enum cpcap_battery_state {
+ CPCAP_BATTERY_STATE_PREVIOUS,
+ CPCAP_BATTERY_STATE_LATEST,
+ CPCAP_BATTERY_STATE_NR,
+};
+
+struct cpcap_battery_state_data {
+ int voltage;
+ int current_ua;
+ int counter_uah;
+ int temperature;
+ ktime_t time;
+ struct cpcap_coulomb_counter_data cc;
+};
+
+struct cpcap_battery_ddata {
+ struct device *dev;
+ struct regmap *reg;
+ struct list_head irq_list;
+ struct iio_channel *channels[CPCAP_BATTERY_IIO_NR];
+ struct power_supply *psy;
+ struct cpcap_battery_config config;
+ struct cpcap_battery_state_data state[CPCAP_BATTERY_STATE_NR];
+ u32 cc_lsb; /* μAms per LSB */
+ atomic_t active;
+ int status;
+ u16 vendor;
+};
+
+#define CPCAP_NO_BATTERY -400
+
+static struct cpcap_battery_state_data *
+cpcap_battery_get_state(struct cpcap_battery_ddata *ddata,
+ enum cpcap_battery_state state)
+{
+ if (state >= CPCAP_BATTERY_STATE_NR)
+ return NULL;
+
+ return &ddata->state[state];
+}
+
+static struct cpcap_battery_state_data *
+cpcap_battery_latest(struct cpcap_battery_ddata *ddata)
+{
+ return cpcap_battery_get_state(ddata, CPCAP_BATTERY_STATE_LATEST);
+}
+
+static struct cpcap_battery_state_data *
+cpcap_battery_previous(struct cpcap_battery_ddata *ddata)
+{
+ return cpcap_battery_get_state(ddata, CPCAP_BATTERY_STATE_PREVIOUS);
+}
+
+static int cpcap_charger_battery_temperature(struct cpcap_battery_ddata *ddata,
+ int *value)
+{
+ struct iio_channel *channel;
+ int error;
+
+ channel = ddata->channels[CPCAP_BATTERY_IIO_BATTDET];
+ error = iio_read_channel_processed(channel, value);
+ if (error < 0) {
+ dev_warn(ddata->dev, "%s failed: %i\n", __func__, error);
+ *value = CPCAP_NO_BATTERY;
+
+ return error;
+ }
+
+ *value /= 100;
+
+ return 0;
+}
+
+static int cpcap_battery_get_voltage(struct cpcap_battery_ddata *ddata)
+{
+ struct iio_channel *channel;
+ int error, value = 0;
+
+ channel = ddata->channels[CPCAP_BATTERY_IIO_VOLTAGE];
+ error = iio_read_channel_processed(channel, &value);
+ if (error < 0) {
+ dev_warn(ddata->dev, "%s failed: %i\n", __func__, error);
+
+ return 0;
+ }
+
+ return value * 1000;
+}
+
+static int cpcap_battery_get_current(struct cpcap_battery_ddata *ddata)
+{
+ struct iio_channel *channel;
+ int error, value = 0;
+
+ channel = ddata->channels[CPCAP_BATTERY_IIO_BATT_CURRENT];
+ error = iio_read_channel_processed(channel, &value);
+ if (error < 0) {
+ dev_warn(ddata->dev, "%s failed: %i\n", __func__, error);
+
+ return 0;
+ }
+
+ return value * 1000;
+}
+
+/**
+ * cpcap_battery_cc_raw_div - calculate and divide coulomb counter μAms values
+ * @ddata: device driver data
+ * @sample: coulomb counter sample value
+ * @accumulator: coulomb counter integrator value
+ * @offset: coulomb counter offset value
+ * @divider: conversion divider
+ *
+ * Note that cc_lsb and cc_dur values are from Motorola Linux kernel
+ * function data_get_avg_curr_ua() and seem to be based on measured test
+ * results. It also has the following comment:
+ *
+ * Adjustment factors are applied here as a temp solution per the test
+ * results. Need to work out a formal solution for this adjustment.
+ *
+ * A coulomb counter for similar hardware seems to be documented in
+ * "TWL6030 Gas Gauging Basics (Rev. A)" swca095a.pdf in chapter
+ * "10 Calculating Accumulated Current". We however follow what the
+ * Motorola mapphone Linux kernel is doing as there may be either a
+ * TI or ST coulomb counter in the PMIC.
+ */
+static int cpcap_battery_cc_raw_div(struct cpcap_battery_ddata *ddata,
+ s32 sample, s32 accumulator,
+ s16 offset, u32 divider)
+{
+ s64 acc;
+
+ if (!divider)
+ return 0;
+
+ acc = accumulator;
+ acc -= (s64)sample * offset;
+ acc *= ddata->cc_lsb;
+ acc *= -1;
+ acc = div_s64(acc, divider);
+
+ return acc;
+}
+
+/* 3600000μAms = 1μAh */
+static int cpcap_battery_cc_to_uah(struct cpcap_battery_ddata *ddata,
+ s32 sample, s32 accumulator,
+ s16 offset)
+{
+ return cpcap_battery_cc_raw_div(ddata, sample,
+ accumulator, offset,
+ 3600000);
+}
+
+static int cpcap_battery_cc_to_ua(struct cpcap_battery_ddata *ddata,
+ s32 sample, s32 accumulator,
+ s16 offset)
+{
+ return cpcap_battery_cc_raw_div(ddata, sample,
+ accumulator, offset,
+ sample *
+ CPCAP_BATTERY_CC_SAMPLE_PERIOD_MS);
+}
+
+/**
+ * cpcap_battery_read_accumulated - reads cpcap coulomb counter
+ * @ddata: device driver data
+ * @ccd: coulomb counter values
+ *
+ * Based on Motorola mapphone kernel function data_read_regs().
+ * Looking at the registers, the coulomb counter seems similar to
+ * the coulomb counter in TWL6030. See "TWL6030 Gas Gauging Basics
+ * (Rev. A) swca095a.pdf for "10 Calculating Accumulated Current".
+ *
+ * Note that swca095a.pdf instructs to stop the coulomb counter
+ * before reading to avoid values changing. Motorola mapphone
+ * Linux kernel does not do it, so let's assume they've verified
+ * the data produced is correct.
+ */
+static int
+cpcap_battery_read_accumulated(struct cpcap_battery_ddata *ddata,
+ struct cpcap_coulomb_counter_data *ccd)
+{
+ u16 buf[7]; /* CPCAP_REG_CCS1 to CCI */
+ int error;
+
+ ccd->sample = 0;
+ ccd->accumulator = 0;
+ ccd->offset = 0;
+ ccd->integrator = 0;
+
+ /* Read coulomb counter register range */
+ error = regmap_bulk_read(ddata->reg, CPCAP_REG_CCS1,
+ buf, ARRAY_SIZE(buf));
+ if (error)
+ return 0;
+
+ /* Sample value CPCAP_REG_CCS1 & 2 */
+ ccd->sample = (buf[1] & 0x0fff) << 16;
+ ccd->sample |= buf[0];
+ if (ddata->vendor == CPCAP_VENDOR_TI)
+ ccd->sample = sign_extend32(24, ccd->sample);
+
+ /* Accumulator value CPCAP_REG_CCA1 & 2 */
+ ccd->accumulator = ((s16)buf[3]) << 16;
+ ccd->accumulator |= buf[2];
+
+ /*
+ * Coulomb counter calibration offset is CPCAP_REG_CCM,
+ * REG_CCO seems unused
+ */
+ ccd->offset = buf[4];
+ ccd->offset = sign_extend32(ccd->offset, 9);
+
+ /* Integrator register CPCAP_REG_CCI */
+ if (ddata->vendor == CPCAP_VENDOR_TI)
+ ccd->integrator = sign_extend32(buf[6], 13);
+ else
+ ccd->integrator = (s16)buf[6];
+
+ return cpcap_battery_cc_to_uah(ddata,
+ ccd->sample,
+ ccd->accumulator,
+ ccd->offset);
+}
+
+/**
+ * cpcap_battery_cc_get_avg_current - read cpcap coulumb counter
+ * @ddata: cpcap battery driver device data
+ */
+static int cpcap_battery_cc_get_avg_current(struct cpcap_battery_ddata *ddata)
+{
+ int value, acc, error;
+ s32 sample;
+ s16 offset;
+
+ /* Coulomb counter integrator */
+ error = regmap_read(ddata->reg, CPCAP_REG_CCI, &value);
+ if (error)
+ return error;
+
+ if (ddata->vendor == CPCAP_VENDOR_TI) {
+ acc = sign_extend32(value, 13);
+ sample = 1;
+ } else {
+ acc = (s16)value;
+ sample = 4;
+ }
+
+ /* Coulomb counter calibration offset */
+ error = regmap_read(ddata->reg, CPCAP_REG_CCM, &value);
+ if (error)
+ return error;
+
+ offset = sign_extend32(value, 9);
+
+ return cpcap_battery_cc_to_ua(ddata, sample, acc, offset);
+}
+
+static bool cpcap_battery_full(struct cpcap_battery_ddata *ddata)
+{
+ struct cpcap_battery_state_data *state = cpcap_battery_latest(ddata);
+
+ if (state->voltage >=
+ (ddata->config.bat.constant_charge_voltage_max_uv - 18000))
+ return true;
+
+ return false;
+}
+
+static int cpcap_battery_update_status(struct cpcap_battery_ddata *ddata)
+{
+ struct cpcap_battery_state_data state, *latest, *previous;
+ ktime_t now;
+ int error;
+
+ memset(&state, 0, sizeof(state));
+ now = ktime_get();
+
+ latest = cpcap_battery_latest(ddata);
+ if (latest) {
+ s64 delta_ms = ktime_to_ms(ktime_sub(now, latest->time));
+
+ if (delta_ms < CPCAP_BATTERY_CC_SAMPLE_PERIOD_MS)
+ return delta_ms;
+ }
+
+ state.time = now;
+ state.voltage = cpcap_battery_get_voltage(ddata);
+ state.current_ua = cpcap_battery_get_current(ddata);
+ state.counter_uah = cpcap_battery_read_accumulated(ddata, &state.cc);
+
+ error = cpcap_charger_battery_temperature(ddata,
+ &state.temperature);
+ if (error)
+ return error;
+
+ previous = cpcap_battery_previous(ddata);
+ memcpy(previous, latest, sizeof(*previous));
+ memcpy(latest, &state, sizeof(*latest));
+
+ return 0;
+}
+
+static enum power_supply_property cpcap_battery_props[] = {
+ POWER_SUPPLY_PROP_STATUS,
+ POWER_SUPPLY_PROP_PRESENT,
+ POWER_SUPPLY_PROP_TECHNOLOGY,
+ POWER_SUPPLY_PROP_VOLTAGE_NOW,
+ POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN,
+ POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN,
+ POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE,
+ POWER_SUPPLY_PROP_CURRENT_AVG,
+ POWER_SUPPLY_PROP_CURRENT_NOW,
+ POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN,
+ POWER_SUPPLY_PROP_CHARGE_COUNTER,
+ POWER_SUPPLY_PROP_POWER_NOW,
+ POWER_SUPPLY_PROP_POWER_AVG,
+ POWER_SUPPLY_PROP_CAPACITY_LEVEL,
+ POWER_SUPPLY_PROP_SCOPE,
+ POWER_SUPPLY_PROP_TEMP,
+};
+
+static int cpcap_battery_get_property(struct power_supply *psy,
+ enum power_supply_property psp,
+ union power_supply_propval *val)
+{
+ struct cpcap_battery_ddata *ddata = power_supply_get_drvdata(psy);
+ struct cpcap_battery_state_data *latest, *previous;
+ u32 sample;
+ s32 accumulator;
+ int cached;
+ s64 tmp;
+
+ cached = cpcap_battery_update_status(ddata);
+ if (cached < 0)
+ return cached;
+
+ latest = cpcap_battery_latest(ddata);
+ previous = cpcap_battery_previous(ddata);
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_PRESENT:
+ if (latest->temperature > CPCAP_NO_BATTERY)
+ val->intval = 1;
+ else
+ val->intval = 0;
+ break;
+ case POWER_SUPPLY_PROP_STATUS:
+ if (cpcap_battery_full(ddata)) {
+ val->intval = POWER_SUPPLY_STATUS_FULL;
+ break;
+ }
+ if (cpcap_battery_cc_get_avg_current(ddata) < 0)
+ val->intval = POWER_SUPPLY_STATUS_CHARGING;
+ else
+ val->intval = POWER_SUPPLY_STATUS_DISCHARGING;
+ break;
+ case POWER_SUPPLY_PROP_TECHNOLOGY:
+ val->intval = ddata->config.info.technology;
+ break;
+ case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+ val->intval = cpcap_battery_get_voltage(ddata);
+ break;
+ case POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN:
+ val->intval = ddata->config.info.voltage_max_design;
+ break;
+ case POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN:
+ val->intval = ddata->config.info.voltage_min_design;
+ break;
+ case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE:
+ val->intval = ddata->config.bat.constant_charge_voltage_max_uv;
+ break;
+ case POWER_SUPPLY_PROP_CURRENT_AVG:
+ sample = latest->cc.sample - previous->cc.sample;
+ if (!sample) {
+ val->intval = cpcap_battery_cc_get_avg_current(ddata);
+ break;
+ }
+ accumulator = latest->cc.accumulator - previous->cc.accumulator;
+ val->intval = cpcap_battery_cc_to_ua(ddata, sample,
+ accumulator,
+ latest->cc.offset);
+ break;
+ case POWER_SUPPLY_PROP_CURRENT_NOW:
+ val->intval = latest->current_ua;
+ break;
+ case POWER_SUPPLY_PROP_CHARGE_COUNTER:
+ val->intval = latest->counter_uah;
+ break;
+ case POWER_SUPPLY_PROP_POWER_NOW:
+ tmp = (latest->voltage / 10000) * latest->current_ua;
+ val->intval = div64_s64(tmp, 100);
+ break;
+ case POWER_SUPPLY_PROP_POWER_AVG:
+ sample = latest->cc.sample - previous->cc.sample;
+ if (!sample) {
+ tmp = cpcap_battery_cc_get_avg_current(ddata);
+ tmp *= (latest->voltage / 10000);
+ val->intval = div64_s64(tmp, 100);
+ break;
+ }
+ accumulator = latest->cc.accumulator - previous->cc.accumulator;
+ tmp = cpcap_battery_cc_to_ua(ddata, sample, accumulator,
+ latest->cc.offset);
+ tmp *= ((latest->voltage + previous->voltage) / 20000);
+ val->intval = div64_s64(tmp, 100);
+ break;
+ case POWER_SUPPLY_PROP_CAPACITY_LEVEL:
+ if (cpcap_battery_full(ddata))
+ val->intval = POWER_SUPPLY_CAPACITY_LEVEL_FULL;
+ else if (latest->voltage >= 3750000)
+ val->intval = POWER_SUPPLY_CAPACITY_LEVEL_HIGH;
+ else if (latest->voltage >= 3300000)
+ val->intval = POWER_SUPPLY_CAPACITY_LEVEL_NORMAL;
+ else if (latest->voltage > 3100000)
+ val->intval = POWER_SUPPLY_CAPACITY_LEVEL_LOW;
+ else if (latest->voltage <= 3100000)
+ val->intval = POWER_SUPPLY_CAPACITY_LEVEL_CRITICAL;
+ else
+ val->intval = POWER_SUPPLY_CAPACITY_LEVEL_UNKNOWN;
+ break;
+ case POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN:
+ val->intval = ddata->config.info.charge_full_design;
+ break;
+ case POWER_SUPPLY_PROP_SCOPE:
+ val->intval = POWER_SUPPLY_SCOPE_SYSTEM;
+ break;
+ case POWER_SUPPLY_PROP_TEMP:
+ val->intval = latest->temperature;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int cpcap_battery_update_charger(struct cpcap_battery_ddata *ddata,
+ int const_charge_voltage)
+{
+ union power_supply_propval prop;
+ union power_supply_propval val;
+ struct power_supply *charger;
+ int error;
+
+ charger = power_supply_get_by_name("usb");
+ if (!charger)
+ return -ENODEV;
+
+ error = power_supply_get_property(charger,
+ POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE,
+ &prop);
+ if (error)
+ goto out_put;
+
+ /* Allow charger const voltage lower than battery const voltage */
+ if (const_charge_voltage > prop.intval)
+ goto out_put;
+
+ val.intval = const_charge_voltage;
+
+ error = power_supply_set_property(charger,
+ POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE,
+ &val);
+out_put:
+ power_supply_put(charger);
+
+ return error;
+}
+
+static int cpcap_battery_set_property(struct power_supply *psy,
+ enum power_supply_property psp,
+ const union power_supply_propval *val)
+{
+ struct cpcap_battery_ddata *ddata = power_supply_get_drvdata(psy);
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE:
+ if (val->intval < ddata->config.info.voltage_min_design)
+ return -EINVAL;
+ if (val->intval > ddata->config.info.voltage_max_design)
+ return -EINVAL;
+
+ ddata->config.bat.constant_charge_voltage_max_uv = val->intval;
+
+ return cpcap_battery_update_charger(ddata, val->intval);
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int cpcap_battery_property_is_writeable(struct power_supply *psy,
+ enum power_supply_property psp)
+{
+ switch (psp) {
+ case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE:
+ return 1;
+ default:
+ return 0;
+ }
+}
+
+static irqreturn_t cpcap_battery_irq_thread(int irq, void *data)
+{
+ struct cpcap_battery_ddata *ddata = data;
+ struct cpcap_battery_state_data *latest;
+ struct cpcap_interrupt_desc *d;
+
+ if (!atomic_read(&ddata->active))
+ return IRQ_NONE;
+
+ list_for_each_entry(d, &ddata->irq_list, node) {
+ if (irq == d->irq)
+ break;
+ }
+
+ if (list_entry_is_head(d, &ddata->irq_list, node))
+ return IRQ_NONE;
+
+ latest = cpcap_battery_latest(ddata);
+
+ switch (d->action) {
+ case CPCAP_BATTERY_IRQ_ACTION_CC_CAL_DONE:
+ dev_info(ddata->dev, "Coulomb counter calibration done\n");
+ break;
+ case CPCAP_BATTERY_IRQ_ACTION_BATTERY_LOW:
+ if (latest->current_ua >= 0)
+ dev_warn(ddata->dev, "Battery low at %imV!\n",
+ latest->voltage / 1000);
+ break;
+ case CPCAP_BATTERY_IRQ_ACTION_POWEROFF:
+ if (latest->current_ua >= 0 && latest->voltage <= 3200000) {
+ dev_emerg(ddata->dev,
+ "Battery empty at %imV, powering off\n",
+ latest->voltage / 1000);
+ orderly_poweroff(true);
+ }
+ break;
+ default:
+ break;
+ }
+
+ power_supply_changed(ddata->psy);
+
+ return IRQ_HANDLED;
+}
+
+static int cpcap_battery_init_irq(struct platform_device *pdev,
+ struct cpcap_battery_ddata *ddata,
+ const char *name)
+{
+ struct cpcap_interrupt_desc *d;
+ int irq, error;
+
+ irq = platform_get_irq_byname(pdev, name);
+ if (irq < 0)
+ return irq;
+
+ error = devm_request_threaded_irq(ddata->dev, irq, NULL,
+ cpcap_battery_irq_thread,
+ IRQF_SHARED | IRQF_ONESHOT,
+ name, ddata);
+ if (error) {
+ dev_err(ddata->dev, "could not get irq %s: %i\n",
+ name, error);
+
+ return error;
+ }
+
+ d = devm_kzalloc(ddata->dev, sizeof(*d), GFP_KERNEL);
+ if (!d)
+ return -ENOMEM;
+
+ d->name = name;
+ d->irq = irq;
+
+ if (!strncmp(name, "cccal", 5))
+ d->action = CPCAP_BATTERY_IRQ_ACTION_CC_CAL_DONE;
+ else if (!strncmp(name, "lowbph", 6))
+ d->action = CPCAP_BATTERY_IRQ_ACTION_BATTERY_LOW;
+ else if (!strncmp(name, "lowbpl", 6))
+ d->action = CPCAP_BATTERY_IRQ_ACTION_POWEROFF;
+
+ list_add(&d->node, &ddata->irq_list);
+
+ return 0;
+}
+
+static int cpcap_battery_init_interrupts(struct platform_device *pdev,
+ struct cpcap_battery_ddata *ddata)
+{
+ static const char * const cpcap_battery_irqs[] = {
+ "eol", "lowbph", "lowbpl",
+ "chrgcurr1", "battdetb"
+ };
+ int i, error;
+
+ for (i = 0; i < ARRAY_SIZE(cpcap_battery_irqs); i++) {
+ error = cpcap_battery_init_irq(pdev, ddata,
+ cpcap_battery_irqs[i]);
+ if (error)
+ return error;
+ }
+
+ /* Enable calibration interrupt if already available in dts */
+ cpcap_battery_init_irq(pdev, ddata, "cccal");
+
+ /* Enable low battery interrupts for 3.3V high and 3.1V low */
+ error = regmap_update_bits(ddata->reg, CPCAP_REG_BPEOL,
+ 0xffff,
+ CPCAP_REG_BPEOL_BIT_BATTDETEN);
+ if (error)
+ return error;
+
+ return 0;
+}
+
+static int cpcap_battery_init_iio(struct cpcap_battery_ddata *ddata)
+{
+ const char * const names[CPCAP_BATTERY_IIO_NR] = {
+ "battdetb", "battp", "chg_isense", "batti",
+ };
+ int error, i;
+
+ for (i = 0; i < CPCAP_BATTERY_IIO_NR; i++) {
+ ddata->channels[i] = devm_iio_channel_get(ddata->dev,
+ names[i]);
+ if (IS_ERR(ddata->channels[i])) {
+ error = PTR_ERR(ddata->channels[i]);
+ goto out_err;
+ }
+
+ if (!ddata->channels[i]->indio_dev) {
+ error = -ENXIO;
+ goto out_err;
+ }
+ }
+
+ return 0;
+
+out_err:
+ return dev_err_probe(ddata->dev, error,
+ "could not initialize VBUS or ID IIO\n");
+}
+
+/* Calibrate coulomb counter */
+static int cpcap_battery_calibrate(struct cpcap_battery_ddata *ddata)
+{
+ int error, ccc1, value;
+ unsigned long timeout;
+
+ error = regmap_read(ddata->reg, CPCAP_REG_CCC1, &ccc1);
+ if (error)
+ return error;
+
+ timeout = jiffies + msecs_to_jiffies(6000);
+
+ /* Start calibration */
+ error = regmap_update_bits(ddata->reg, CPCAP_REG_CCC1,
+ 0xffff,
+ CPCAP_REG_CCC1_CAL_EN);
+ if (error)
+ goto restore;
+
+ while (time_before(jiffies, timeout)) {
+ error = regmap_read(ddata->reg, CPCAP_REG_CCC1, &value);
+ if (error)
+ goto restore;
+
+ if (!(value & CPCAP_REG_CCC1_CAL_EN))
+ break;
+
+ error = regmap_read(ddata->reg, CPCAP_REG_CCM, &value);
+ if (error)
+ goto restore;
+
+ msleep(300);
+ }
+
+ /* Read calibration offset from CCM */
+ error = regmap_read(ddata->reg, CPCAP_REG_CCM, &value);
+ if (error)
+ goto restore;
+
+ dev_info(ddata->dev, "calibration done: 0x%04x\n", value);
+
+restore:
+ if (error)
+ dev_err(ddata->dev, "%s: error %i\n", __func__, error);
+
+ error = regmap_update_bits(ddata->reg, CPCAP_REG_CCC1,
+ 0xffff, ccc1);
+ if (error)
+ dev_err(ddata->dev, "%s: restore error %i\n",
+ __func__, error);
+
+ return error;
+}
+
+/*
+ * Based on the values from Motorola mapphone Linux kernel. In the
+ * the Motorola mapphone Linux kernel tree the value for pm_cd_factor
+ * is passed to the kernel via device tree. If it turns out to be
+ * something device specific we can consider that too later.
+ *
+ * And looking at the battery full and shutdown values for the stock
+ * kernel on droid 4, full is 4351000 and software initiates shutdown
+ * at 3078000. The device will die around 2743000.
+ */
+static const struct cpcap_battery_config cpcap_battery_default_data = {
+ .cd_factor = 0x3cc,
+ .info.technology = POWER_SUPPLY_TECHNOLOGY_LION,
+ .info.voltage_max_design = 4351000,
+ .info.voltage_min_design = 3100000,
+ .info.charge_full_design = 1740000,
+ .bat.constant_charge_voltage_max_uv = 4200000,
+};
+
+#ifdef CONFIG_OF
+static const struct of_device_id cpcap_battery_id_table[] = {
+ {
+ .compatible = "motorola,cpcap-battery",
+ .data = &cpcap_battery_default_data,
+ },
+ {},
+};
+MODULE_DEVICE_TABLE(of, cpcap_battery_id_table);
+#endif
+
+static int cpcap_battery_probe(struct platform_device *pdev)
+{
+ struct power_supply_desc *psy_desc;
+ struct cpcap_battery_ddata *ddata;
+ const struct of_device_id *match;
+ struct power_supply_config psy_cfg = {};
+ int error;
+
+ match = of_match_device(of_match_ptr(cpcap_battery_id_table),
+ &pdev->dev);
+ if (!match)
+ return -EINVAL;
+
+ if (!match->data) {
+ dev_err(&pdev->dev, "no configuration data found\n");
+
+ return -ENODEV;
+ }
+
+ ddata = devm_kzalloc(&pdev->dev, sizeof(*ddata), GFP_KERNEL);
+ if (!ddata)
+ return -ENOMEM;
+
+ INIT_LIST_HEAD(&ddata->irq_list);
+ ddata->dev = &pdev->dev;
+ memcpy(&ddata->config, match->data, sizeof(ddata->config));
+
+ ddata->reg = dev_get_regmap(ddata->dev->parent, NULL);
+ if (!ddata->reg)
+ return -ENODEV;
+
+ error = cpcap_get_vendor(ddata->dev, ddata->reg, &ddata->vendor);
+ if (error)
+ return error;
+
+ switch (ddata->vendor) {
+ case CPCAP_VENDOR_ST:
+ ddata->cc_lsb = 95374; /* μAms per LSB */
+ break;
+ case CPCAP_VENDOR_TI:
+ ddata->cc_lsb = 91501; /* μAms per LSB */
+ break;
+ default:
+ return -EINVAL;
+ }
+ ddata->cc_lsb = (ddata->cc_lsb * ddata->config.cd_factor) / 1000;
+
+ platform_set_drvdata(pdev, ddata);
+
+ error = cpcap_battery_init_interrupts(pdev, ddata);
+ if (error)
+ return error;
+
+ error = cpcap_battery_init_iio(ddata);
+ if (error)
+ return error;
+
+ psy_desc = devm_kzalloc(ddata->dev, sizeof(*psy_desc), GFP_KERNEL);
+ if (!psy_desc)
+ return -ENOMEM;
+
+ psy_desc->name = "battery";
+ psy_desc->type = POWER_SUPPLY_TYPE_BATTERY;
+ psy_desc->properties = cpcap_battery_props;
+ psy_desc->num_properties = ARRAY_SIZE(cpcap_battery_props);
+ psy_desc->get_property = cpcap_battery_get_property;
+ psy_desc->set_property = cpcap_battery_set_property;
+ psy_desc->property_is_writeable = cpcap_battery_property_is_writeable;
+
+ psy_cfg.of_node = pdev->dev.of_node;
+ psy_cfg.drv_data = ddata;
+
+ ddata->psy = devm_power_supply_register(ddata->dev, psy_desc,
+ &psy_cfg);
+ error = PTR_ERR_OR_ZERO(ddata->psy);
+ if (error) {
+ dev_err(ddata->dev, "failed to register power supply\n");
+ return error;
+ }
+
+ atomic_set(&ddata->active, 1);
+
+ error = cpcap_battery_calibrate(ddata);
+ if (error)
+ return error;
+
+ return 0;
+}
+
+static int cpcap_battery_remove(struct platform_device *pdev)
+{
+ struct cpcap_battery_ddata *ddata = platform_get_drvdata(pdev);
+ int error;
+
+ atomic_set(&ddata->active, 0);
+ error = regmap_update_bits(ddata->reg, CPCAP_REG_BPEOL,
+ 0xffff, 0);
+ if (error)
+ dev_err(&pdev->dev, "could not disable: %i\n", error);
+
+ return 0;
+}
+
+static struct platform_driver cpcap_battery_driver = {
+ .driver = {
+ .name = "cpcap_battery",
+ .of_match_table = of_match_ptr(cpcap_battery_id_table),
+ },
+ .probe = cpcap_battery_probe,
+ .remove = cpcap_battery_remove,
+};
+module_platform_driver(cpcap_battery_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Tony Lindgren <tony@atomide.com>");
+MODULE_DESCRIPTION("CPCAP PMIC Battery Driver");
diff --git a/drivers/power/supply/cpcap-charger.c b/drivers/power/supply/cpcap-charger.c
new file mode 100644
index 000000000..891e1eb8e
--- /dev/null
+++ b/drivers/power/supply/cpcap-charger.c
@@ -0,0 +1,927 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Motorola CPCAP PMIC battery charger driver
+ *
+ * Copyright (C) 2017 Tony Lindgren <tony@atomide.com>
+ *
+ * Rewritten for Linux power framework with some parts based on
+ * on earlier driver found in the Motorola Linux kernel:
+ *
+ * Copyright (C) 2009-2010 Motorola, Inc.
+ */
+
+#include <linux/atomic.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/err.h>
+#include <linux/interrupt.h>
+#include <linux/notifier.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/power_supply.h>
+#include <linux/regmap.h>
+
+#include <linux/gpio/consumer.h>
+#include <linux/usb/phy_companion.h>
+#include <linux/phy/omap_usb.h>
+#include <linux/usb/otg.h>
+#include <linux/iio/consumer.h>
+#include <linux/mfd/motorola-cpcap.h>
+
+/*
+ * CPCAP_REG_CRM register bits. For documentation of somewhat similar hardware,
+ * see NXP "MC13783 Power Management and Audio Circuit Users's Guide"
+ * MC13783UG.pdf chapter "8.5 Battery Interface Register Summary". The registers
+ * and values for CPCAP are different, but some of the internal components seem
+ * similar. Also see the Motorola Linux kernel cpcap-regbits.h. CPCAP_REG_CHRGR_1
+ * bits that seem to describe the CRM register.
+ */
+#define CPCAP_REG_CRM_UNUSED_641_15 BIT(15) /* 641 = register number */
+#define CPCAP_REG_CRM_UNUSED_641_14 BIT(14) /* 641 = register number */
+#define CPCAP_REG_CRM_CHRG_LED_EN BIT(13) /* Charger LED */
+#define CPCAP_REG_CRM_RVRSMODE BIT(12) /* USB VBUS output enable */
+#define CPCAP_REG_CRM_ICHRG_TR1 BIT(11) /* Trickle charge current */
+#define CPCAP_REG_CRM_ICHRG_TR0 BIT(10)
+#define CPCAP_REG_CRM_FET_OVRD BIT(9) /* 0 = hardware, 1 = FET_CTRL */
+#define CPCAP_REG_CRM_FET_CTRL BIT(8) /* BPFET 1 if FET_OVRD set */
+#define CPCAP_REG_CRM_VCHRG3 BIT(7) /* Charge voltage bits */
+#define CPCAP_REG_CRM_VCHRG2 BIT(6)
+#define CPCAP_REG_CRM_VCHRG1 BIT(5)
+#define CPCAP_REG_CRM_VCHRG0 BIT(4)
+#define CPCAP_REG_CRM_ICHRG3 BIT(3) /* Charge current bits */
+#define CPCAP_REG_CRM_ICHRG2 BIT(2)
+#define CPCAP_REG_CRM_ICHRG1 BIT(1)
+#define CPCAP_REG_CRM_ICHRG0 BIT(0)
+
+/* CPCAP_REG_CRM trickle charge voltages */
+#define CPCAP_REG_CRM_TR(val) (((val) & 0x3) << 10)
+#define CPCAP_REG_CRM_TR_0A00 CPCAP_REG_CRM_TR(0x0)
+#define CPCAP_REG_CRM_TR_0A24 CPCAP_REG_CRM_TR(0x1)
+#define CPCAP_REG_CRM_TR_0A48 CPCAP_REG_CRM_TR(0x2)
+#define CPCAP_REG_CRM_TR_0A72 CPCAP_REG_CRM_TR(0x4)
+
+/*
+ * CPCAP_REG_CRM charge voltages based on the ADC channel 1 values.
+ * Note that these register bits don't match MC13783UG.pdf VCHRG
+ * register bits.
+ */
+#define CPCAP_REG_CRM_VCHRG(val) (((val) & 0xf) << 4)
+#define CPCAP_REG_CRM_VCHRG_3V80 CPCAP_REG_CRM_VCHRG(0x0)
+#define CPCAP_REG_CRM_VCHRG_4V10 CPCAP_REG_CRM_VCHRG(0x1)
+#define CPCAP_REG_CRM_VCHRG_4V12 CPCAP_REG_CRM_VCHRG(0x2)
+#define CPCAP_REG_CRM_VCHRG_4V15 CPCAP_REG_CRM_VCHRG(0x3)
+#define CPCAP_REG_CRM_VCHRG_4V17 CPCAP_REG_CRM_VCHRG(0x4)
+#define CPCAP_REG_CRM_VCHRG_4V20 CPCAP_REG_CRM_VCHRG(0x5)
+#define CPCAP_REG_CRM_VCHRG_4V23 CPCAP_REG_CRM_VCHRG(0x6)
+#define CPCAP_REG_CRM_VCHRG_4V25 CPCAP_REG_CRM_VCHRG(0x7)
+#define CPCAP_REG_CRM_VCHRG_4V27 CPCAP_REG_CRM_VCHRG(0x8)
+#define CPCAP_REG_CRM_VCHRG_4V30 CPCAP_REG_CRM_VCHRG(0x9)
+#define CPCAP_REG_CRM_VCHRG_4V33 CPCAP_REG_CRM_VCHRG(0xa)
+#define CPCAP_REG_CRM_VCHRG_4V35 CPCAP_REG_CRM_VCHRG(0xb)
+#define CPCAP_REG_CRM_VCHRG_4V38 CPCAP_REG_CRM_VCHRG(0xc)
+#define CPCAP_REG_CRM_VCHRG_4V40 CPCAP_REG_CRM_VCHRG(0xd)
+#define CPCAP_REG_CRM_VCHRG_4V42 CPCAP_REG_CRM_VCHRG(0xe)
+#define CPCAP_REG_CRM_VCHRG_4V44 CPCAP_REG_CRM_VCHRG(0xf)
+
+/*
+ * CPCAP_REG_CRM charge currents. These seem to match MC13783UG.pdf
+ * values in "Table 8-3. Charge Path Regulator Current Limit
+ * Characteristics" for the nominal values.
+ */
+#define CPCAP_REG_CRM_ICHRG(val) (((val) & 0xf) << 0)
+#define CPCAP_REG_CRM_ICHRG_0A000 CPCAP_REG_CRM_ICHRG(0x0)
+#define CPCAP_REG_CRM_ICHRG_0A070 CPCAP_REG_CRM_ICHRG(0x1)
+#define CPCAP_REG_CRM_ICHRG_0A177 CPCAP_REG_CRM_ICHRG(0x2)
+#define CPCAP_REG_CRM_ICHRG_0A266 CPCAP_REG_CRM_ICHRG(0x3)
+#define CPCAP_REG_CRM_ICHRG_0A355 CPCAP_REG_CRM_ICHRG(0x4)
+#define CPCAP_REG_CRM_ICHRG_0A443 CPCAP_REG_CRM_ICHRG(0x5)
+#define CPCAP_REG_CRM_ICHRG_0A532 CPCAP_REG_CRM_ICHRG(0x6)
+#define CPCAP_REG_CRM_ICHRG_0A621 CPCAP_REG_CRM_ICHRG(0x7)
+#define CPCAP_REG_CRM_ICHRG_0A709 CPCAP_REG_CRM_ICHRG(0x8)
+#define CPCAP_REG_CRM_ICHRG_0A798 CPCAP_REG_CRM_ICHRG(0x9)
+#define CPCAP_REG_CRM_ICHRG_0A886 CPCAP_REG_CRM_ICHRG(0xa)
+#define CPCAP_REG_CRM_ICHRG_0A975 CPCAP_REG_CRM_ICHRG(0xb)
+#define CPCAP_REG_CRM_ICHRG_1A064 CPCAP_REG_CRM_ICHRG(0xc)
+#define CPCAP_REG_CRM_ICHRG_1A152 CPCAP_REG_CRM_ICHRG(0xd)
+#define CPCAP_REG_CRM_ICHRG_1A596 CPCAP_REG_CRM_ICHRG(0xe)
+#define CPCAP_REG_CRM_ICHRG_NO_LIMIT CPCAP_REG_CRM_ICHRG(0xf)
+
+/* CPCAP_REG_VUSBC register bits needed for VBUS */
+#define CPCAP_BIT_VBUS_SWITCH BIT(0) /* VBUS boost to 5V */
+
+enum {
+ CPCAP_CHARGER_IIO_BATTDET,
+ CPCAP_CHARGER_IIO_VOLTAGE,
+ CPCAP_CHARGER_IIO_VBUS,
+ CPCAP_CHARGER_IIO_CHRG_CURRENT,
+ CPCAP_CHARGER_IIO_BATT_CURRENT,
+ CPCAP_CHARGER_IIO_NR,
+};
+
+enum {
+ CPCAP_CHARGER_DISCONNECTED,
+ CPCAP_CHARGER_DETECTING,
+ CPCAP_CHARGER_CHARGING,
+ CPCAP_CHARGER_DONE,
+};
+
+struct cpcap_charger_ddata {
+ struct device *dev;
+ struct regmap *reg;
+ struct list_head irq_list;
+ struct delayed_work detect_work;
+ struct delayed_work vbus_work;
+ struct gpio_desc *gpio[2]; /* gpio_reven0 & 1 */
+
+ struct iio_channel *channels[CPCAP_CHARGER_IIO_NR];
+
+ struct power_supply *usb;
+
+ struct phy_companion comparator; /* For USB VBUS */
+ unsigned int vbus_enabled:1;
+ unsigned int feeding_vbus:1;
+ atomic_t active;
+
+ int status;
+ int state;
+ int voltage;
+};
+
+struct cpcap_interrupt_desc {
+ int irq;
+ struct list_head node;
+ const char *name;
+};
+
+struct cpcap_charger_ints_state {
+ bool chrg_det;
+ bool rvrs_chrg;
+ bool vbusov;
+
+ bool chrg_se1b;
+ bool rvrs_mode;
+ bool chrgcurr2;
+ bool chrgcurr1;
+ bool vbusvld;
+
+ bool battdetb;
+};
+
+static enum power_supply_property cpcap_charger_props[] = {
+ POWER_SUPPLY_PROP_STATUS,
+ POWER_SUPPLY_PROP_ONLINE,
+ POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE,
+ POWER_SUPPLY_PROP_VOLTAGE_NOW,
+ POWER_SUPPLY_PROP_CURRENT_NOW,
+};
+
+/* No battery always shows temperature of -40000 */
+static bool cpcap_charger_battery_found(struct cpcap_charger_ddata *ddata)
+{
+ struct iio_channel *channel;
+ int error, temperature;
+
+ channel = ddata->channels[CPCAP_CHARGER_IIO_BATTDET];
+ error = iio_read_channel_processed(channel, &temperature);
+ if (error < 0) {
+ dev_warn(ddata->dev, "%s failed: %i\n", __func__, error);
+
+ return false;
+ }
+
+ return temperature > -20000 && temperature < 60000;
+}
+
+static int cpcap_charger_get_charge_voltage(struct cpcap_charger_ddata *ddata)
+{
+ struct iio_channel *channel;
+ int error, value = 0;
+
+ channel = ddata->channels[CPCAP_CHARGER_IIO_VOLTAGE];
+ error = iio_read_channel_processed(channel, &value);
+ if (error < 0) {
+ dev_warn(ddata->dev, "%s failed: %i\n", __func__, error);
+
+ return 0;
+ }
+
+ return value;
+}
+
+static int cpcap_charger_get_charge_current(struct cpcap_charger_ddata *ddata)
+{
+ struct iio_channel *channel;
+ int error, value = 0;
+
+ channel = ddata->channels[CPCAP_CHARGER_IIO_CHRG_CURRENT];
+ error = iio_read_channel_processed(channel, &value);
+ if (error < 0) {
+ dev_warn(ddata->dev, "%s failed: %i\n", __func__, error);
+
+ return 0;
+ }
+
+ return value;
+}
+
+static int cpcap_charger_get_property(struct power_supply *psy,
+ enum power_supply_property psp,
+ union power_supply_propval *val)
+{
+ struct cpcap_charger_ddata *ddata = dev_get_drvdata(psy->dev.parent);
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_STATUS:
+ val->intval = ddata->status;
+ break;
+ case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE:
+ val->intval = ddata->voltage;
+ break;
+ case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+ if (ddata->status == POWER_SUPPLY_STATUS_CHARGING)
+ val->intval = cpcap_charger_get_charge_voltage(ddata) *
+ 1000;
+ else
+ val->intval = 0;
+ break;
+ case POWER_SUPPLY_PROP_CURRENT_NOW:
+ if (ddata->status == POWER_SUPPLY_STATUS_CHARGING)
+ val->intval = cpcap_charger_get_charge_current(ddata) *
+ 1000;
+ else
+ val->intval = 0;
+ break;
+ case POWER_SUPPLY_PROP_ONLINE:
+ val->intval = ddata->status == POWER_SUPPLY_STATUS_CHARGING;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int cpcap_charger_match_voltage(int voltage)
+{
+ switch (voltage) {
+ case 0 ... 4100000 - 1: return 3800000;
+ case 4100000 ... 4120000 - 1: return 4100000;
+ case 4120000 ... 4150000 - 1: return 4120000;
+ case 4150000 ... 4170000 - 1: return 4150000;
+ case 4170000 ... 4200000 - 1: return 4170000;
+ case 4200000 ... 4230000 - 1: return 4200000;
+ case 4230000 ... 4250000 - 1: return 4230000;
+ case 4250000 ... 4270000 - 1: return 4250000;
+ case 4270000 ... 4300000 - 1: return 4270000;
+ case 4300000 ... 4330000 - 1: return 4300000;
+ case 4330000 ... 4350000 - 1: return 4330000;
+ case 4350000 ... 4380000 - 1: return 4350000;
+ case 4380000 ... 4400000 - 1: return 4380000;
+ case 4400000 ... 4420000 - 1: return 4400000;
+ case 4420000 ... 4440000 - 1: return 4420000;
+ case 4440000: return 4440000;
+ default: return 0;
+ }
+}
+
+static int
+cpcap_charger_get_bat_const_charge_voltage(struct cpcap_charger_ddata *ddata)
+{
+ union power_supply_propval prop;
+ struct power_supply *battery;
+ int voltage = ddata->voltage;
+ int error;
+
+ battery = power_supply_get_by_name("battery");
+ if (battery) {
+ error = power_supply_get_property(battery,
+ POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE,
+ &prop);
+ if (!error)
+ voltage = prop.intval;
+
+ power_supply_put(battery);
+ }
+
+ return voltage;
+}
+
+static int cpcap_charger_set_property(struct power_supply *psy,
+ enum power_supply_property psp,
+ const union power_supply_propval *val)
+{
+ struct cpcap_charger_ddata *ddata = dev_get_drvdata(psy->dev.parent);
+ int voltage, batvolt;
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE:
+ voltage = cpcap_charger_match_voltage(val->intval);
+ batvolt = cpcap_charger_get_bat_const_charge_voltage(ddata);
+ if (voltage > batvolt)
+ voltage = batvolt;
+ ddata->voltage = voltage;
+ schedule_delayed_work(&ddata->detect_work, 0);
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int cpcap_charger_property_is_writeable(struct power_supply *psy,
+ enum power_supply_property psp)
+{
+ switch (psp) {
+ case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE:
+ return 1;
+ default:
+ return 0;
+ }
+}
+
+static void cpcap_charger_set_cable_path(struct cpcap_charger_ddata *ddata,
+ bool enabled)
+{
+ if (!ddata->gpio[0])
+ return;
+
+ gpiod_set_value(ddata->gpio[0], enabled);
+}
+
+static void cpcap_charger_set_inductive_path(struct cpcap_charger_ddata *ddata,
+ bool enabled)
+{
+ if (!ddata->gpio[1])
+ return;
+
+ gpiod_set_value(ddata->gpio[1], enabled);
+}
+
+static int cpcap_charger_set_state(struct cpcap_charger_ddata *ddata,
+ int max_voltage, int charge_current,
+ int trickle_current)
+{
+ bool enable;
+ int error;
+
+ enable = (charge_current || trickle_current);
+ dev_dbg(ddata->dev, "%s enable: %i\n", __func__, enable);
+
+ if (!enable) {
+ error = regmap_update_bits(ddata->reg, CPCAP_REG_CRM,
+ 0x3fff,
+ CPCAP_REG_CRM_FET_OVRD |
+ CPCAP_REG_CRM_FET_CTRL);
+ if (error) {
+ ddata->status = POWER_SUPPLY_STATUS_UNKNOWN;
+ goto out_err;
+ }
+
+ ddata->status = POWER_SUPPLY_STATUS_DISCHARGING;
+
+ return 0;
+ }
+
+ error = regmap_update_bits(ddata->reg, CPCAP_REG_CRM, 0x3fff,
+ CPCAP_REG_CRM_CHRG_LED_EN |
+ trickle_current |
+ CPCAP_REG_CRM_FET_OVRD |
+ CPCAP_REG_CRM_FET_CTRL |
+ max_voltage |
+ charge_current);
+ if (error) {
+ ddata->status = POWER_SUPPLY_STATUS_UNKNOWN;
+ goto out_err;
+ }
+
+ ddata->status = POWER_SUPPLY_STATUS_CHARGING;
+
+ return 0;
+
+out_err:
+ dev_err(ddata->dev, "%s failed with %i\n", __func__, error);
+
+ return error;
+}
+
+static bool cpcap_charger_vbus_valid(struct cpcap_charger_ddata *ddata)
+{
+ int error, value = 0;
+ struct iio_channel *channel =
+ ddata->channels[CPCAP_CHARGER_IIO_VBUS];
+
+ error = iio_read_channel_processed(channel, &value);
+ if (error >= 0)
+ return value > 3900 ? true : false;
+
+ dev_err(ddata->dev, "error reading VBUS: %i\n", error);
+
+ return false;
+}
+
+/* VBUS control functions for the USB PHY companion */
+static void cpcap_charger_vbus_work(struct work_struct *work)
+{
+ struct cpcap_charger_ddata *ddata;
+ bool vbus = false;
+ int error;
+
+ ddata = container_of(work, struct cpcap_charger_ddata,
+ vbus_work.work);
+
+ if (ddata->vbus_enabled) {
+ vbus = cpcap_charger_vbus_valid(ddata);
+ if (vbus) {
+ dev_info(ddata->dev, "VBUS already provided\n");
+
+ return;
+ }
+
+ ddata->feeding_vbus = true;
+ cpcap_charger_set_cable_path(ddata, false);
+ cpcap_charger_set_inductive_path(ddata, false);
+
+ error = cpcap_charger_set_state(ddata, 0, 0, 0);
+ if (error)
+ goto out_err;
+
+ error = regmap_update_bits(ddata->reg, CPCAP_REG_VUSBC,
+ CPCAP_BIT_VBUS_SWITCH,
+ CPCAP_BIT_VBUS_SWITCH);
+ if (error)
+ goto out_err;
+
+ error = regmap_update_bits(ddata->reg, CPCAP_REG_CRM,
+ CPCAP_REG_CRM_RVRSMODE,
+ CPCAP_REG_CRM_RVRSMODE);
+ if (error)
+ goto out_err;
+ } else {
+ error = regmap_update_bits(ddata->reg, CPCAP_REG_VUSBC,
+ CPCAP_BIT_VBUS_SWITCH, 0);
+ if (error)
+ goto out_err;
+
+ error = regmap_update_bits(ddata->reg, CPCAP_REG_CRM,
+ CPCAP_REG_CRM_RVRSMODE, 0);
+ if (error)
+ goto out_err;
+
+ cpcap_charger_set_cable_path(ddata, true);
+ cpcap_charger_set_inductive_path(ddata, true);
+ ddata->feeding_vbus = false;
+ }
+
+ return;
+
+out_err:
+ dev_err(ddata->dev, "%s could not %s vbus: %i\n", __func__,
+ ddata->vbus_enabled ? "enable" : "disable", error);
+}
+
+static int cpcap_charger_set_vbus(struct phy_companion *comparator,
+ bool enabled)
+{
+ struct cpcap_charger_ddata *ddata =
+ container_of(comparator, struct cpcap_charger_ddata,
+ comparator);
+
+ ddata->vbus_enabled = enabled;
+ schedule_delayed_work(&ddata->vbus_work, 0);
+
+ return 0;
+}
+
+/* Charger interrupt handling functions */
+
+static int cpcap_charger_get_ints_state(struct cpcap_charger_ddata *ddata,
+ struct cpcap_charger_ints_state *s)
+{
+ int val, error;
+
+ error = regmap_read(ddata->reg, CPCAP_REG_INTS1, &val);
+ if (error)
+ return error;
+
+ s->chrg_det = val & BIT(13);
+ s->rvrs_chrg = val & BIT(12);
+ s->vbusov = val & BIT(11);
+
+ error = regmap_read(ddata->reg, CPCAP_REG_INTS2, &val);
+ if (error)
+ return error;
+
+ s->chrg_se1b = val & BIT(13);
+ s->rvrs_mode = val & BIT(6);
+ s->chrgcurr2 = val & BIT(5);
+ s->chrgcurr1 = val & BIT(4);
+ s->vbusvld = val & BIT(3);
+
+ error = regmap_read(ddata->reg, CPCAP_REG_INTS4, &val);
+ if (error)
+ return error;
+
+ s->battdetb = val & BIT(6);
+
+ return 0;
+}
+
+static void cpcap_charger_update_state(struct cpcap_charger_ddata *ddata,
+ int state)
+{
+ const char *status;
+
+ if (state > CPCAP_CHARGER_DONE) {
+ dev_warn(ddata->dev, "unknown state: %i\n", state);
+
+ return;
+ }
+
+ ddata->state = state;
+
+ switch (state) {
+ case CPCAP_CHARGER_DISCONNECTED:
+ status = "DISCONNECTED";
+ break;
+ case CPCAP_CHARGER_DETECTING:
+ status = "DETECTING";
+ break;
+ case CPCAP_CHARGER_CHARGING:
+ status = "CHARGING";
+ break;
+ case CPCAP_CHARGER_DONE:
+ status = "DONE";
+ break;
+ default:
+ return;
+ }
+
+ dev_dbg(ddata->dev, "state: %s\n", status);
+}
+
+static int cpcap_charger_voltage_to_regval(int voltage)
+{
+ int offset;
+
+ switch (voltage) {
+ case 0 ... 4100000 - 1:
+ return 0;
+ case 4100000 ... 4200000 - 1:
+ offset = 1;
+ break;
+ case 4200000 ... 4300000 - 1:
+ offset = 0;
+ break;
+ case 4300000 ... 4380000 - 1:
+ offset = -1;
+ break;
+ case 4380000 ... 4440000:
+ offset = -2;
+ break;
+ default:
+ return 0;
+ }
+
+ return ((voltage - 4100000) / 20000) + offset;
+}
+
+static void cpcap_charger_disconnect(struct cpcap_charger_ddata *ddata,
+ int state, unsigned long delay)
+{
+ int error;
+
+ error = cpcap_charger_set_state(ddata, 0, 0, 0);
+ if (error)
+ return;
+
+ cpcap_charger_update_state(ddata, state);
+ power_supply_changed(ddata->usb);
+ schedule_delayed_work(&ddata->detect_work, delay);
+}
+
+static void cpcap_usb_detect(struct work_struct *work)
+{
+ struct cpcap_charger_ddata *ddata;
+ struct cpcap_charger_ints_state s;
+ int error;
+
+ ddata = container_of(work, struct cpcap_charger_ddata,
+ detect_work.work);
+
+ error = cpcap_charger_get_ints_state(ddata, &s);
+ if (error)
+ return;
+
+ /* Just init the state if a charger is connected with no chrg_det set */
+ if (!s.chrg_det && s.chrgcurr1 && s.vbusvld) {
+ cpcap_charger_update_state(ddata, CPCAP_CHARGER_DETECTING);
+
+ return;
+ }
+
+ /*
+ * If battery voltage is higher than charge voltage, it may have been
+ * charged to 4.35V by Android. Try again in 10 minutes.
+ */
+ if (cpcap_charger_get_charge_voltage(ddata) > ddata->voltage) {
+ cpcap_charger_disconnect(ddata, CPCAP_CHARGER_DETECTING,
+ HZ * 60 * 10);
+
+ return;
+ }
+
+ /* Delay for 80ms to avoid vbus bouncing when usb cable is plugged in */
+ usleep_range(80000, 120000);
+
+ /* Throttle chrgcurr2 interrupt for charger done and retry */
+ switch (ddata->state) {
+ case CPCAP_CHARGER_CHARGING:
+ if (s.chrgcurr2)
+ break;
+ if (s.chrgcurr1 && s.vbusvld) {
+ cpcap_charger_disconnect(ddata, CPCAP_CHARGER_DONE,
+ HZ * 5);
+ return;
+ }
+ break;
+ case CPCAP_CHARGER_DONE:
+ if (!s.chrgcurr2)
+ break;
+ cpcap_charger_disconnect(ddata, CPCAP_CHARGER_DETECTING,
+ HZ * 5);
+ return;
+ default:
+ break;
+ }
+
+ if (!ddata->feeding_vbus && cpcap_charger_vbus_valid(ddata) &&
+ s.chrgcurr1) {
+ int max_current;
+ int vchrg;
+
+ if (cpcap_charger_battery_found(ddata))
+ max_current = CPCAP_REG_CRM_ICHRG_1A596;
+ else
+ max_current = CPCAP_REG_CRM_ICHRG_0A532;
+
+ vchrg = cpcap_charger_voltage_to_regval(ddata->voltage);
+ error = cpcap_charger_set_state(ddata,
+ CPCAP_REG_CRM_VCHRG(vchrg),
+ max_current, 0);
+ if (error)
+ goto out_err;
+ cpcap_charger_update_state(ddata, CPCAP_CHARGER_CHARGING);
+ } else {
+ error = cpcap_charger_set_state(ddata, 0, 0, 0);
+ if (error)
+ goto out_err;
+ cpcap_charger_update_state(ddata, CPCAP_CHARGER_DISCONNECTED);
+ }
+
+ power_supply_changed(ddata->usb);
+ return;
+
+out_err:
+ dev_err(ddata->dev, "%s failed with %i\n", __func__, error);
+}
+
+static irqreturn_t cpcap_charger_irq_thread(int irq, void *data)
+{
+ struct cpcap_charger_ddata *ddata = data;
+
+ if (!atomic_read(&ddata->active))
+ return IRQ_NONE;
+
+ schedule_delayed_work(&ddata->detect_work, 0);
+
+ return IRQ_HANDLED;
+}
+
+static int cpcap_usb_init_irq(struct platform_device *pdev,
+ struct cpcap_charger_ddata *ddata,
+ const char *name)
+{
+ struct cpcap_interrupt_desc *d;
+ int irq, error;
+
+ irq = platform_get_irq_byname(pdev, name);
+ if (irq < 0)
+ return -ENODEV;
+
+ error = devm_request_threaded_irq(ddata->dev, irq, NULL,
+ cpcap_charger_irq_thread,
+ IRQF_SHARED | IRQF_ONESHOT,
+ name, ddata);
+ if (error) {
+ dev_err(ddata->dev, "could not get irq %s: %i\n",
+ name, error);
+
+ return error;
+ }
+
+ d = devm_kzalloc(ddata->dev, sizeof(*d), GFP_KERNEL);
+ if (!d)
+ return -ENOMEM;
+
+ d->name = name;
+ d->irq = irq;
+ list_add(&d->node, &ddata->irq_list);
+
+ return 0;
+}
+
+static const char * const cpcap_charger_irqs[] = {
+ /* REG_INT_0 */
+ "chrg_det", "rvrs_chrg",
+
+ /* REG_INT1 */
+ "chrg_se1b", "se0conn", "rvrs_mode", "chrgcurr2", "chrgcurr1", "vbusvld",
+
+ /* REG_INT_3 */
+ "battdetb",
+};
+
+static int cpcap_usb_init_interrupts(struct platform_device *pdev,
+ struct cpcap_charger_ddata *ddata)
+{
+ int i, error;
+
+ for (i = 0; i < ARRAY_SIZE(cpcap_charger_irqs); i++) {
+ error = cpcap_usb_init_irq(pdev, ddata, cpcap_charger_irqs[i]);
+ if (error)
+ return error;
+ }
+
+ return 0;
+}
+
+static void cpcap_charger_init_optional_gpios(struct cpcap_charger_ddata *ddata)
+{
+ int i;
+
+ for (i = 0; i < 2; i++) {
+ ddata->gpio[i] = devm_gpiod_get_index(ddata->dev, "mode",
+ i, GPIOD_OUT_HIGH);
+ if (IS_ERR(ddata->gpio[i])) {
+ dev_info(ddata->dev, "no mode change GPIO%i: %li\n",
+ i, PTR_ERR(ddata->gpio[i]));
+ ddata->gpio[i] = NULL;
+ }
+ }
+}
+
+static int cpcap_charger_init_iio(struct cpcap_charger_ddata *ddata)
+{
+ const char * const names[CPCAP_CHARGER_IIO_NR] = {
+ "battdetb", "battp", "vbus", "chg_isense", "batti",
+ };
+ int error, i;
+
+ for (i = 0; i < CPCAP_CHARGER_IIO_NR; i++) {
+ ddata->channels[i] = devm_iio_channel_get(ddata->dev,
+ names[i]);
+ if (IS_ERR(ddata->channels[i])) {
+ error = PTR_ERR(ddata->channels[i]);
+ goto out_err;
+ }
+
+ if (!ddata->channels[i]->indio_dev) {
+ error = -ENXIO;
+ goto out_err;
+ }
+ }
+
+ return 0;
+
+out_err:
+ if (error != -EPROBE_DEFER)
+ dev_err(ddata->dev, "could not initialize VBUS or ID IIO: %i\n",
+ error);
+
+ return error;
+}
+
+static const struct power_supply_desc cpcap_charger_usb_desc = {
+ .name = "usb",
+ .type = POWER_SUPPLY_TYPE_USB,
+ .properties = cpcap_charger_props,
+ .num_properties = ARRAY_SIZE(cpcap_charger_props),
+ .get_property = cpcap_charger_get_property,
+ .set_property = cpcap_charger_set_property,
+ .property_is_writeable = cpcap_charger_property_is_writeable,
+};
+
+#ifdef CONFIG_OF
+static const struct of_device_id cpcap_charger_id_table[] = {
+ {
+ .compatible = "motorola,mapphone-cpcap-charger",
+ },
+ {},
+};
+MODULE_DEVICE_TABLE(of, cpcap_charger_id_table);
+#endif
+
+static int cpcap_charger_probe(struct platform_device *pdev)
+{
+ struct cpcap_charger_ddata *ddata;
+ const struct of_device_id *of_id;
+ struct power_supply_config psy_cfg = {};
+ int error;
+
+ of_id = of_match_device(of_match_ptr(cpcap_charger_id_table),
+ &pdev->dev);
+ if (!of_id)
+ return -EINVAL;
+
+ ddata = devm_kzalloc(&pdev->dev, sizeof(*ddata), GFP_KERNEL);
+ if (!ddata)
+ return -ENOMEM;
+
+ ddata->dev = &pdev->dev;
+ ddata->voltage = 4200000;
+
+ ddata->reg = dev_get_regmap(ddata->dev->parent, NULL);
+ if (!ddata->reg)
+ return -ENODEV;
+
+ INIT_LIST_HEAD(&ddata->irq_list);
+ INIT_DELAYED_WORK(&ddata->detect_work, cpcap_usb_detect);
+ INIT_DELAYED_WORK(&ddata->vbus_work, cpcap_charger_vbus_work);
+ platform_set_drvdata(pdev, ddata);
+
+ error = cpcap_charger_init_iio(ddata);
+ if (error)
+ return error;
+
+ atomic_set(&ddata->active, 1);
+
+ psy_cfg.of_node = pdev->dev.of_node;
+ psy_cfg.drv_data = ddata;
+
+ ddata->usb = devm_power_supply_register(ddata->dev,
+ &cpcap_charger_usb_desc,
+ &psy_cfg);
+ if (IS_ERR(ddata->usb)) {
+ error = PTR_ERR(ddata->usb);
+ dev_err(ddata->dev, "failed to register USB charger: %i\n",
+ error);
+
+ return error;
+ }
+
+ error = cpcap_usb_init_interrupts(pdev, ddata);
+ if (error)
+ return error;
+
+ ddata->comparator.set_vbus = cpcap_charger_set_vbus;
+ error = omap_usb2_set_comparator(&ddata->comparator);
+ if (error == -ENODEV) {
+ dev_info(ddata->dev, "charger needs phy, deferring probe\n");
+ return -EPROBE_DEFER;
+ }
+
+ cpcap_charger_init_optional_gpios(ddata);
+
+ schedule_delayed_work(&ddata->detect_work, 0);
+
+ return 0;
+}
+
+static int cpcap_charger_remove(struct platform_device *pdev)
+{
+ struct cpcap_charger_ddata *ddata = platform_get_drvdata(pdev);
+ int error;
+
+ atomic_set(&ddata->active, 0);
+ error = omap_usb2_set_comparator(NULL);
+ if (error)
+ dev_warn(ddata->dev, "could not clear USB comparator: %i\n",
+ error);
+
+ error = cpcap_charger_set_state(ddata, 0, 0, 0);
+ if (error)
+ dev_warn(ddata->dev, "could not clear charger: %i\n",
+ error);
+ cancel_delayed_work_sync(&ddata->vbus_work);
+ cancel_delayed_work_sync(&ddata->detect_work);
+
+ return 0;
+}
+
+static struct platform_driver cpcap_charger_driver = {
+ .probe = cpcap_charger_probe,
+ .driver = {
+ .name = "cpcap-charger",
+ .of_match_table = of_match_ptr(cpcap_charger_id_table),
+ },
+ .remove = cpcap_charger_remove,
+};
+module_platform_driver(cpcap_charger_driver);
+
+MODULE_AUTHOR("Tony Lindgren <tony@atomide.com>");
+MODULE_DESCRIPTION("CPCAP Battery Charger Interface driver");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:cpcap-charger");
diff --git a/drivers/power/supply/cros_usbpd-charger.c b/drivers/power/supply/cros_usbpd-charger.c
new file mode 100644
index 000000000..0a4f02e4a
--- /dev/null
+++ b/drivers/power/supply/cros_usbpd-charger.c
@@ -0,0 +1,726 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Power supply driver for ChromeOS EC based USB PD Charger.
+ *
+ * Copyright (c) 2014 - 2018 Google, Inc
+ */
+
+#include <linux/module.h>
+#include <linux/platform_data/cros_ec_commands.h>
+#include <linux/platform_data/cros_ec_proto.h>
+#include <linux/platform_data/cros_usbpd_notify.h>
+#include <linux/platform_device.h>
+#include <linux/power_supply.h>
+#include <linux/slab.h>
+
+#define CHARGER_USBPD_DIR_NAME "CROS_USBPD_CHARGER%d"
+#define CHARGER_DEDICATED_DIR_NAME "CROS_DEDICATED_CHARGER"
+#define CHARGER_DIR_NAME_LENGTH (sizeof(CHARGER_USBPD_DIR_NAME) >= \
+ sizeof(CHARGER_DEDICATED_DIR_NAME) ? \
+ sizeof(CHARGER_USBPD_DIR_NAME) : \
+ sizeof(CHARGER_DEDICATED_DIR_NAME))
+#define CHARGER_CACHE_UPDATE_DELAY msecs_to_jiffies(500)
+#define CHARGER_MANUFACTURER_MODEL_LENGTH 32
+
+#define DRV_NAME "cros-usbpd-charger"
+
+struct port_data {
+ int port_number;
+ char name[CHARGER_DIR_NAME_LENGTH];
+ char manufacturer[CHARGER_MANUFACTURER_MODEL_LENGTH];
+ char model_name[CHARGER_MANUFACTURER_MODEL_LENGTH];
+ struct power_supply *psy;
+ struct power_supply_desc psy_desc;
+ int psy_usb_type;
+ int psy_online;
+ int psy_status;
+ int psy_current_max;
+ int psy_voltage_max_design;
+ int psy_voltage_now;
+ int psy_power_max;
+ struct charger_data *charger;
+ unsigned long last_update;
+};
+
+struct charger_data {
+ struct device *dev;
+ struct cros_ec_dev *ec_dev;
+ struct cros_ec_device *ec_device;
+ int num_charger_ports;
+ int num_usbpd_ports;
+ int num_registered_psy;
+ struct port_data *ports[EC_USB_PD_MAX_PORTS];
+ struct notifier_block notifier;
+};
+
+static enum power_supply_property cros_usbpd_charger_props[] = {
+ POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT,
+ POWER_SUPPLY_PROP_INPUT_VOLTAGE_LIMIT,
+ POWER_SUPPLY_PROP_ONLINE,
+ POWER_SUPPLY_PROP_STATUS,
+ POWER_SUPPLY_PROP_CURRENT_MAX,
+ POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN,
+ POWER_SUPPLY_PROP_VOLTAGE_NOW,
+ POWER_SUPPLY_PROP_MODEL_NAME,
+ POWER_SUPPLY_PROP_MANUFACTURER,
+ POWER_SUPPLY_PROP_USB_TYPE
+};
+
+static enum power_supply_property cros_usbpd_dedicated_charger_props[] = {
+ POWER_SUPPLY_PROP_ONLINE,
+ POWER_SUPPLY_PROP_STATUS,
+ POWER_SUPPLY_PROP_VOLTAGE_NOW,
+};
+
+static enum power_supply_usb_type cros_usbpd_charger_usb_types[] = {
+ POWER_SUPPLY_USB_TYPE_UNKNOWN,
+ POWER_SUPPLY_USB_TYPE_SDP,
+ POWER_SUPPLY_USB_TYPE_DCP,
+ POWER_SUPPLY_USB_TYPE_CDP,
+ POWER_SUPPLY_USB_TYPE_C,
+ POWER_SUPPLY_USB_TYPE_PD,
+ POWER_SUPPLY_USB_TYPE_PD_DRP,
+ POWER_SUPPLY_USB_TYPE_APPLE_BRICK_ID
+};
+
+/* Input voltage/current limit in mV/mA. Default to none. */
+static u16 input_voltage_limit = EC_POWER_LIMIT_NONE;
+static u16 input_current_limit = EC_POWER_LIMIT_NONE;
+
+static bool cros_usbpd_charger_port_is_dedicated(struct port_data *port)
+{
+ return port->port_number >= port->charger->num_usbpd_ports;
+}
+
+static int cros_usbpd_charger_ec_command(struct charger_data *charger,
+ unsigned int version,
+ unsigned int command,
+ void *outdata,
+ unsigned int outsize,
+ void *indata,
+ unsigned int insize)
+{
+ struct cros_ec_dev *ec_dev = charger->ec_dev;
+ struct cros_ec_command *msg;
+ int ret;
+
+ msg = kzalloc(sizeof(*msg) + max(outsize, insize), GFP_KERNEL);
+ if (!msg)
+ return -ENOMEM;
+
+ msg->version = version;
+ msg->command = ec_dev->cmd_offset + command;
+ msg->outsize = outsize;
+ msg->insize = insize;
+
+ if (outsize)
+ memcpy(msg->data, outdata, outsize);
+
+ ret = cros_ec_cmd_xfer_status(charger->ec_device, msg);
+ if (ret >= 0 && insize)
+ memcpy(indata, msg->data, insize);
+
+ kfree(msg);
+ return ret;
+}
+
+static int cros_usbpd_charger_get_num_ports(struct charger_data *charger)
+{
+ struct ec_response_charge_port_count resp;
+ int ret;
+
+ ret = cros_usbpd_charger_ec_command(charger, 0,
+ EC_CMD_CHARGE_PORT_COUNT,
+ NULL, 0, &resp, sizeof(resp));
+ if (ret < 0)
+ return ret;
+
+ return resp.port_count;
+}
+
+static int cros_usbpd_charger_get_usbpd_num_ports(struct charger_data *charger)
+{
+ struct ec_response_usb_pd_ports resp;
+ int ret;
+
+ ret = cros_usbpd_charger_ec_command(charger, 0, EC_CMD_USB_PD_PORTS,
+ NULL, 0, &resp, sizeof(resp));
+ if (ret < 0)
+ return ret;
+
+ return resp.num_ports;
+}
+
+static int cros_usbpd_charger_get_discovery_info(struct port_data *port)
+{
+ struct charger_data *charger = port->charger;
+ struct ec_params_usb_pd_discovery_entry resp;
+ struct ec_params_usb_pd_info_request req;
+ int ret;
+
+ req.port = port->port_number;
+
+ ret = cros_usbpd_charger_ec_command(charger, 0,
+ EC_CMD_USB_PD_DISCOVERY,
+ &req, sizeof(req),
+ &resp, sizeof(resp));
+ if (ret < 0) {
+ dev_err(charger->dev,
+ "Unable to query discovery info (err:0x%x)\n", ret);
+ return ret;
+ }
+
+ dev_dbg(charger->dev, "Port %d: VID = 0x%x, PID=0x%x, PTYPE=0x%x\n",
+ port->port_number, resp.vid, resp.pid, resp.ptype);
+
+ snprintf(port->manufacturer, sizeof(port->manufacturer), "%x",
+ resp.vid);
+ snprintf(port->model_name, sizeof(port->model_name), "%x", resp.pid);
+
+ return 0;
+}
+
+static int cros_usbpd_charger_get_power_info(struct port_data *port)
+{
+ struct charger_data *charger = port->charger;
+ struct ec_response_usb_pd_power_info resp;
+ struct ec_params_usb_pd_power_info req;
+ int last_psy_status, last_psy_usb_type;
+ struct device *dev = charger->dev;
+ int ret;
+
+ req.port = port->port_number;
+ ret = cros_usbpd_charger_ec_command(charger, 0,
+ EC_CMD_USB_PD_POWER_INFO,
+ &req, sizeof(req),
+ &resp, sizeof(resp));
+ if (ret < 0) {
+ dev_err(dev, "Unable to query PD power info (err:0x%x)\n", ret);
+ return ret;
+ }
+
+ last_psy_status = port->psy_status;
+ last_psy_usb_type = port->psy_usb_type;
+
+ switch (resp.role) {
+ case USB_PD_PORT_POWER_DISCONNECTED:
+ port->psy_status = POWER_SUPPLY_STATUS_NOT_CHARGING;
+ port->psy_online = 0;
+ break;
+ case USB_PD_PORT_POWER_SOURCE:
+ port->psy_status = POWER_SUPPLY_STATUS_NOT_CHARGING;
+ port->psy_online = 0;
+ break;
+ case USB_PD_PORT_POWER_SINK:
+ port->psy_status = POWER_SUPPLY_STATUS_CHARGING;
+ port->psy_online = 1;
+ break;
+ case USB_PD_PORT_POWER_SINK_NOT_CHARGING:
+ port->psy_status = POWER_SUPPLY_STATUS_NOT_CHARGING;
+ port->psy_online = 1;
+ break;
+ default:
+ dev_err(dev, "Unknown role %d\n", resp.role);
+ break;
+ }
+
+ port->psy_voltage_max_design = resp.meas.voltage_max;
+ port->psy_voltage_now = resp.meas.voltage_now;
+ port->psy_current_max = resp.meas.current_max;
+ port->psy_power_max = resp.max_power;
+
+ switch (resp.type) {
+ case USB_CHG_TYPE_BC12_SDP:
+ case USB_CHG_TYPE_VBUS:
+ port->psy_usb_type = POWER_SUPPLY_USB_TYPE_SDP;
+ break;
+ case USB_CHG_TYPE_NONE:
+ /*
+ * For dual-role devices when we are a source, the firmware
+ * reports the type as NONE. Report such chargers as type
+ * USB_PD_DRP.
+ */
+ if (resp.role == USB_PD_PORT_POWER_SOURCE && resp.dualrole)
+ port->psy_usb_type = POWER_SUPPLY_USB_TYPE_PD_DRP;
+ else
+ port->psy_usb_type = POWER_SUPPLY_USB_TYPE_SDP;
+ break;
+ case USB_CHG_TYPE_OTHER:
+ case USB_CHG_TYPE_PROPRIETARY:
+ port->psy_usb_type = POWER_SUPPLY_USB_TYPE_APPLE_BRICK_ID;
+ break;
+ case USB_CHG_TYPE_C:
+ port->psy_usb_type = POWER_SUPPLY_USB_TYPE_C;
+ break;
+ case USB_CHG_TYPE_BC12_DCP:
+ port->psy_usb_type = POWER_SUPPLY_USB_TYPE_DCP;
+ break;
+ case USB_CHG_TYPE_BC12_CDP:
+ port->psy_usb_type = POWER_SUPPLY_USB_TYPE_CDP;
+ break;
+ case USB_CHG_TYPE_PD:
+ if (resp.dualrole)
+ port->psy_usb_type = POWER_SUPPLY_USB_TYPE_PD_DRP;
+ else
+ port->psy_usb_type = POWER_SUPPLY_USB_TYPE_PD;
+ break;
+ case USB_CHG_TYPE_UNKNOWN:
+ /*
+ * While the EC is trying to determine the type of charger that
+ * has been plugged in, it will report the charger type as
+ * unknown. Additionally since the power capabilities are
+ * unknown, report the max current and voltage as zero.
+ */
+ port->psy_usb_type = POWER_SUPPLY_USB_TYPE_UNKNOWN;
+ port->psy_voltage_max_design = 0;
+ port->psy_current_max = 0;
+ break;
+ default:
+ dev_dbg(dev, "Port %d: default case!\n", port->port_number);
+ port->psy_usb_type = POWER_SUPPLY_USB_TYPE_SDP;
+ }
+
+ if (cros_usbpd_charger_port_is_dedicated(port))
+ port->psy_desc.type = POWER_SUPPLY_TYPE_MAINS;
+ else
+ port->psy_desc.type = POWER_SUPPLY_TYPE_USB;
+
+ dev_dbg(dev,
+ "Port %d: type=%d vmax=%d vnow=%d cmax=%d clim=%d pmax=%d\n",
+ port->port_number, resp.type, resp.meas.voltage_max,
+ resp.meas.voltage_now, resp.meas.current_max,
+ resp.meas.current_lim, resp.max_power);
+
+ /*
+ * If power supply type or status changed, explicitly call
+ * power_supply_changed. This results in udev event getting generated
+ * and allows user mode apps to react quicker instead of waiting for
+ * their next poll of power supply status.
+ */
+ if (last_psy_usb_type != port->psy_usb_type ||
+ last_psy_status != port->psy_status)
+ power_supply_changed(port->psy);
+
+ return 0;
+}
+
+static int cros_usbpd_charger_get_port_status(struct port_data *port,
+ bool ratelimit)
+{
+ int ret;
+
+ if (ratelimit &&
+ time_is_after_jiffies(port->last_update +
+ CHARGER_CACHE_UPDATE_DELAY))
+ return 0;
+
+ ret = cros_usbpd_charger_get_power_info(port);
+ if (ret < 0)
+ return ret;
+
+ if (!cros_usbpd_charger_port_is_dedicated(port))
+ ret = cros_usbpd_charger_get_discovery_info(port);
+ port->last_update = jiffies;
+
+ return ret;
+}
+
+static int cros_usbpd_charger_set_ext_power_limit(struct charger_data *charger,
+ u16 current_lim,
+ u16 voltage_lim)
+{
+ struct ec_params_external_power_limit_v1 req;
+ int ret;
+
+ req.current_lim = current_lim;
+ req.voltage_lim = voltage_lim;
+
+ ret = cros_usbpd_charger_ec_command(charger, 0,
+ EC_CMD_EXTERNAL_POWER_LIMIT,
+ &req, sizeof(req), NULL, 0);
+ if (ret < 0)
+ dev_err(charger->dev,
+ "Unable to set the 'External Power Limit': %d\n", ret);
+
+ return ret;
+}
+
+static void cros_usbpd_charger_power_changed(struct power_supply *psy)
+{
+ struct port_data *port = power_supply_get_drvdata(psy);
+ struct charger_data *charger = port->charger;
+ int i;
+
+ for (i = 0; i < charger->num_registered_psy; i++)
+ cros_usbpd_charger_get_port_status(charger->ports[i], false);
+}
+
+static int cros_usbpd_charger_get_prop(struct power_supply *psy,
+ enum power_supply_property psp,
+ union power_supply_propval *val)
+{
+ struct port_data *port = power_supply_get_drvdata(psy);
+ struct charger_data *charger = port->charger;
+ struct cros_ec_device *ec_device = charger->ec_device;
+ struct device *dev = charger->dev;
+ int ret;
+
+ /* Only refresh ec_port_status for dynamic properties */
+ switch (psp) {
+ case POWER_SUPPLY_PROP_ONLINE:
+ /*
+ * If mkbp_event_supported, then we can be assured that
+ * the driver's state for the online property is consistent
+ * with the hardware. However, if we aren't event driven,
+ * the optimization before to skip an ec_port_status get
+ * and only returned cached values of the online property will
+ * cause a delay in detecting a cable attach until one of the
+ * other properties are read.
+ *
+ * Allow an ec_port_status refresh for online property check
+ * if we're not already online to check for plug events if
+ * not mkbp_event_supported.
+ */
+ if (ec_device->mkbp_event_supported || port->psy_online)
+ break;
+ fallthrough;
+ case POWER_SUPPLY_PROP_CURRENT_MAX:
+ case POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN:
+ case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+ ret = cros_usbpd_charger_get_port_status(port, true);
+ if (ret < 0) {
+ dev_err(dev, "Failed to get port status (err:0x%x)\n",
+ ret);
+ return -EINVAL;
+ }
+ break;
+ default:
+ break;
+ }
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_ONLINE:
+ val->intval = port->psy_online;
+ break;
+ case POWER_SUPPLY_PROP_STATUS:
+ val->intval = port->psy_status;
+ break;
+ case POWER_SUPPLY_PROP_CURRENT_MAX:
+ val->intval = port->psy_current_max * 1000;
+ break;
+ case POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN:
+ val->intval = port->psy_voltage_max_design * 1000;
+ break;
+ case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+ val->intval = port->psy_voltage_now * 1000;
+ break;
+ case POWER_SUPPLY_PROP_USB_TYPE:
+ val->intval = port->psy_usb_type;
+ break;
+ case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT:
+ if (input_current_limit == EC_POWER_LIMIT_NONE)
+ val->intval = -1;
+ else
+ val->intval = input_current_limit * 1000;
+ break;
+ case POWER_SUPPLY_PROP_INPUT_VOLTAGE_LIMIT:
+ if (input_voltage_limit == EC_POWER_LIMIT_NONE)
+ val->intval = -1;
+ else
+ val->intval = input_voltage_limit * 1000;
+ break;
+ case POWER_SUPPLY_PROP_MODEL_NAME:
+ val->strval = port->model_name;
+ break;
+ case POWER_SUPPLY_PROP_MANUFACTURER:
+ val->strval = port->manufacturer;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int cros_usbpd_charger_set_prop(struct power_supply *psy,
+ enum power_supply_property psp,
+ const union power_supply_propval *val)
+{
+ struct port_data *port = power_supply_get_drvdata(psy);
+ struct charger_data *charger = port->charger;
+ struct device *dev = charger->dev;
+ u16 intval;
+ int ret;
+
+ /* U16_MAX in mV/mA is the maximum supported value */
+ if (val->intval >= U16_MAX * 1000)
+ return -EINVAL;
+ /* A negative number is used to clear the limit */
+ if (val->intval < 0)
+ intval = EC_POWER_LIMIT_NONE;
+ else /* Convert from uA/uV to mA/mV */
+ intval = val->intval / 1000;
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT:
+ ret = cros_usbpd_charger_set_ext_power_limit(charger, intval,
+ input_voltage_limit);
+ if (ret < 0)
+ break;
+
+ input_current_limit = intval;
+ if (input_current_limit == EC_POWER_LIMIT_NONE)
+ dev_info(dev,
+ "External Current Limit cleared for all ports\n");
+ else
+ dev_info(dev,
+ "External Current Limit set to %dmA for all ports\n",
+ input_current_limit);
+ break;
+ case POWER_SUPPLY_PROP_INPUT_VOLTAGE_LIMIT:
+ ret = cros_usbpd_charger_set_ext_power_limit(charger,
+ input_current_limit,
+ intval);
+ if (ret < 0)
+ break;
+
+ input_voltage_limit = intval;
+ if (input_voltage_limit == EC_POWER_LIMIT_NONE)
+ dev_info(dev,
+ "External Voltage Limit cleared for all ports\n");
+ else
+ dev_info(dev,
+ "External Voltage Limit set to %dmV for all ports\n",
+ input_voltage_limit);
+ break;
+ default:
+ ret = -EINVAL;
+ }
+
+ return ret;
+}
+
+static int cros_usbpd_charger_property_is_writeable(struct power_supply *psy,
+ enum power_supply_property psp)
+{
+ int ret;
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT:
+ case POWER_SUPPLY_PROP_INPUT_VOLTAGE_LIMIT:
+ ret = 1;
+ break;
+ default:
+ ret = 0;
+ }
+
+ return ret;
+}
+
+static int cros_usbpd_charger_ec_event(struct notifier_block *nb,
+ unsigned long host_event,
+ void *_notify)
+{
+ struct charger_data *charger = container_of(nb, struct charger_data,
+ notifier);
+
+ cros_usbpd_charger_power_changed(charger->ports[0]->psy);
+ return NOTIFY_OK;
+}
+
+static void cros_usbpd_charger_unregister_notifier(void *data)
+{
+ struct charger_data *charger = data;
+
+ cros_usbpd_unregister_notify(&charger->notifier);
+}
+
+static int cros_usbpd_charger_probe(struct platform_device *pd)
+{
+ struct cros_ec_dev *ec_dev = dev_get_drvdata(pd->dev.parent);
+ struct cros_ec_device *ec_device = ec_dev->ec_dev;
+ struct power_supply_desc *psy_desc;
+ struct device *dev = &pd->dev;
+ struct charger_data *charger;
+ struct power_supply *psy;
+ struct port_data *port;
+ int ret = -EINVAL;
+ int i;
+
+ charger = devm_kzalloc(dev, sizeof(struct charger_data),
+ GFP_KERNEL);
+ if (!charger)
+ return -ENOMEM;
+
+ charger->dev = dev;
+ charger->ec_dev = ec_dev;
+ charger->ec_device = ec_device;
+
+ platform_set_drvdata(pd, charger);
+
+ /*
+ * We need to know the number of USB PD ports in order to know whether
+ * there is a dedicated port. The dedicated port will always be
+ * after the USB PD ports, and there should be only one.
+ */
+ charger->num_usbpd_ports =
+ cros_usbpd_charger_get_usbpd_num_ports(charger);
+ if (charger->num_usbpd_ports <= 0) {
+ /*
+ * This can happen on a system that doesn't support USB PD.
+ * Log a message, but no need to warn.
+ */
+ dev_info(dev, "No USB PD charging ports found\n");
+ }
+
+ charger->num_charger_ports = cros_usbpd_charger_get_num_ports(charger);
+ if (charger->num_charger_ports < 0) {
+ /*
+ * This can happen on a system that doesn't support USB PD.
+ * Log a message, but no need to warn.
+ * Older ECs do not support the above command, in that case
+ * let's set up the number of charger ports equal to the number
+ * of USB PD ports
+ */
+ dev_info(dev, "Could not get charger port count\n");
+ charger->num_charger_ports = charger->num_usbpd_ports;
+ }
+
+ if (charger->num_charger_ports <= 0) {
+ /*
+ * This can happen on a system that doesn't support USB PD and
+ * doesn't have a dedicated port.
+ * Log a message, but no need to warn.
+ */
+ dev_info(dev, "No charging ports found\n");
+ ret = -ENODEV;
+ goto fail_nowarn;
+ }
+
+ /*
+ * Sanity checks on the number of ports:
+ * there should be at most 1 dedicated port
+ */
+ if (charger->num_charger_ports < charger->num_usbpd_ports ||
+ charger->num_charger_ports > (charger->num_usbpd_ports + 1)) {
+ dev_err(dev, "Unexpected number of charge port count\n");
+ ret = -EPROTO;
+ goto fail_nowarn;
+ }
+
+ for (i = 0; i < charger->num_charger_ports; i++) {
+ struct power_supply_config psy_cfg = {};
+
+ port = devm_kzalloc(dev, sizeof(struct port_data), GFP_KERNEL);
+ if (!port) {
+ ret = -ENOMEM;
+ goto fail;
+ }
+
+ port->charger = charger;
+ port->port_number = i;
+
+ psy_desc = &port->psy_desc;
+ psy_desc->get_property = cros_usbpd_charger_get_prop;
+ psy_desc->set_property = cros_usbpd_charger_set_prop;
+ psy_desc->property_is_writeable =
+ cros_usbpd_charger_property_is_writeable;
+ psy_desc->external_power_changed =
+ cros_usbpd_charger_power_changed;
+ psy_cfg.drv_data = port;
+
+ if (cros_usbpd_charger_port_is_dedicated(port)) {
+ sprintf(port->name, CHARGER_DEDICATED_DIR_NAME);
+ psy_desc->type = POWER_SUPPLY_TYPE_MAINS;
+ psy_desc->properties =
+ cros_usbpd_dedicated_charger_props;
+ psy_desc->num_properties =
+ ARRAY_SIZE(cros_usbpd_dedicated_charger_props);
+ } else {
+ sprintf(port->name, CHARGER_USBPD_DIR_NAME, i);
+ psy_desc->type = POWER_SUPPLY_TYPE_USB;
+ psy_desc->properties = cros_usbpd_charger_props;
+ psy_desc->num_properties =
+ ARRAY_SIZE(cros_usbpd_charger_props);
+ psy_desc->usb_types = cros_usbpd_charger_usb_types;
+ psy_desc->num_usb_types =
+ ARRAY_SIZE(cros_usbpd_charger_usb_types);
+ }
+
+ psy_desc->name = port->name;
+
+ psy = devm_power_supply_register_no_ws(dev, psy_desc,
+ &psy_cfg);
+ if (IS_ERR(psy)) {
+ dev_err(dev, "Failed to register power supply\n");
+ continue;
+ }
+ port->psy = psy;
+
+ charger->ports[charger->num_registered_psy++] = port;
+ }
+
+ if (!charger->num_registered_psy) {
+ ret = -ENODEV;
+ dev_err(dev, "No power supplies registered\n");
+ goto fail;
+ }
+
+ /* Get PD events from the EC */
+ charger->notifier.notifier_call = cros_usbpd_charger_ec_event;
+ ret = cros_usbpd_register_notify(&charger->notifier);
+ if (ret < 0) {
+ dev_warn(dev, "failed to register notifier\n");
+ } else {
+ ret = devm_add_action_or_reset(dev,
+ cros_usbpd_charger_unregister_notifier,
+ charger);
+ if (ret < 0)
+ goto fail;
+ }
+
+ return 0;
+
+fail:
+ WARN(1, "%s: Failing probe (err:0x%x)\n", dev_name(dev), ret);
+
+fail_nowarn:
+ dev_info(dev, "Failing probe (err:0x%x)\n", ret);
+ return ret;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int cros_usbpd_charger_resume(struct device *dev)
+{
+ struct charger_data *charger = dev_get_drvdata(dev);
+ int i;
+
+ if (!charger)
+ return 0;
+
+ for (i = 0; i < charger->num_registered_psy; i++) {
+ power_supply_changed(charger->ports[i]->psy);
+ charger->ports[i]->last_update =
+ jiffies - CHARGER_CACHE_UPDATE_DELAY;
+ }
+
+ return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(cros_usbpd_charger_pm_ops, NULL,
+ cros_usbpd_charger_resume);
+
+static struct platform_driver cros_usbpd_charger_driver = {
+ .driver = {
+ .name = DRV_NAME,
+ .pm = &cros_usbpd_charger_pm_ops,
+ },
+ .probe = cros_usbpd_charger_probe
+};
+
+module_platform_driver(cros_usbpd_charger_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("ChromeOS EC USBPD charger");
+MODULE_ALIAS("platform:" DRV_NAME);
diff --git a/drivers/power/supply/cw2015_battery.c b/drivers/power/supply/cw2015_battery.c
new file mode 100644
index 000000000..d1071dbb9
--- /dev/null
+++ b/drivers/power/supply/cw2015_battery.c
@@ -0,0 +1,752 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Fuel gauge driver for CellWise 2013 / 2015
+ *
+ * Copyright (C) 2012, RockChip
+ * Copyright (C) 2020, Tobias Schramm
+ *
+ * Authors: xuhuicong <xhc@rock-chips.com>
+ * Authors: Tobias Schramm <t.schramm@manjaro.org>
+ */
+
+#include <linux/bits.h>
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/gfp.h>
+#include <linux/gpio/consumer.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/power_supply.h>
+#include <linux/property.h>
+#include <linux/regmap.h>
+#include <linux/time.h>
+#include <linux/workqueue.h>
+
+#define CW2015_SIZE_BATINFO 64
+
+#define CW2015_RESET_TRIES 5
+
+#define CW2015_REG_VERSION 0x00
+#define CW2015_REG_VCELL 0x02
+#define CW2015_REG_SOC 0x04
+#define CW2015_REG_RRT_ALERT 0x06
+#define CW2015_REG_CONFIG 0x08
+#define CW2015_REG_MODE 0x0A
+#define CW2015_REG_BATINFO 0x10
+
+#define CW2015_MODE_SLEEP_MASK GENMASK(7, 6)
+#define CW2015_MODE_SLEEP (0x03 << 6)
+#define CW2015_MODE_NORMAL (0x00 << 6)
+#define CW2015_MODE_QUICK_START (0x03 << 4)
+#define CW2015_MODE_RESTART (0x0f << 0)
+
+#define CW2015_CONFIG_UPDATE_FLG (0x01 << 1)
+#define CW2015_ATHD(x) ((x) << 3)
+#define CW2015_MASK_ATHD GENMASK(7, 3)
+#define CW2015_MASK_SOC GENMASK(12, 0)
+
+/* reset gauge of no valid state of charge could be polled for 40s */
+#define CW2015_BAT_SOC_ERROR_MS (40 * MSEC_PER_SEC)
+/* reset gauge if state of charge stuck for half an hour during charging */
+#define CW2015_BAT_CHARGING_STUCK_MS (1800 * MSEC_PER_SEC)
+
+/* poll interval from CellWise GPL Android driver example */
+#define CW2015_DEFAULT_POLL_INTERVAL_MS 8000
+
+#define CW2015_AVERAGING_SAMPLES 3
+
+struct cw_battery {
+ struct device *dev;
+ struct workqueue_struct *battery_workqueue;
+ struct delayed_work battery_delay_work;
+ struct regmap *regmap;
+ struct power_supply *rk_bat;
+ struct power_supply_battery_info battery;
+ u8 *bat_profile;
+
+ bool charger_attached;
+ bool battery_changed;
+
+ int soc;
+ int voltage_mv;
+ int status;
+ int time_to_empty;
+ int charge_count;
+
+ u32 poll_interval_ms;
+ u8 alert_level;
+
+ unsigned int read_errors;
+ unsigned int charge_stuck_cnt;
+};
+
+static int cw_read_word(struct cw_battery *cw_bat, u8 reg, u16 *val)
+{
+ __be16 value;
+ int ret;
+
+ ret = regmap_bulk_read(cw_bat->regmap, reg, &value, sizeof(value));
+ if (ret)
+ return ret;
+
+ *val = be16_to_cpu(value);
+ return 0;
+}
+
+static int cw_update_profile(struct cw_battery *cw_bat)
+{
+ int ret;
+ unsigned int reg_val;
+ u8 reset_val;
+
+ /* make sure gauge is not in sleep mode */
+ ret = regmap_read(cw_bat->regmap, CW2015_REG_MODE, &reg_val);
+ if (ret)
+ return ret;
+
+ reset_val = reg_val;
+ if ((reg_val & CW2015_MODE_SLEEP_MASK) == CW2015_MODE_SLEEP) {
+ dev_err(cw_bat->dev,
+ "Gauge is in sleep mode, can't update battery info\n");
+ return -EINVAL;
+ }
+
+ /* write new battery info */
+ ret = regmap_raw_write(cw_bat->regmap, CW2015_REG_BATINFO,
+ cw_bat->bat_profile,
+ CW2015_SIZE_BATINFO);
+ if (ret)
+ return ret;
+
+ /* set config update flag */
+ reg_val |= CW2015_CONFIG_UPDATE_FLG;
+ reg_val &= ~CW2015_MASK_ATHD;
+ reg_val |= CW2015_ATHD(cw_bat->alert_level);
+ ret = regmap_write(cw_bat->regmap, CW2015_REG_CONFIG, reg_val);
+ if (ret)
+ return ret;
+
+ /* reset gauge to apply new battery profile */
+ reset_val &= ~CW2015_MODE_RESTART;
+ reg_val = reset_val | CW2015_MODE_RESTART;
+ ret = regmap_write(cw_bat->regmap, CW2015_REG_MODE, reg_val);
+ if (ret)
+ return ret;
+
+ /* wait for gauge to reset */
+ msleep(20);
+
+ /* clear reset flag */
+ ret = regmap_write(cw_bat->regmap, CW2015_REG_MODE, reset_val);
+ if (ret)
+ return ret;
+
+ /* wait for gauge to become ready */
+ ret = regmap_read_poll_timeout(cw_bat->regmap, CW2015_REG_SOC,
+ reg_val, reg_val <= 100,
+ 10 * USEC_PER_MSEC, 10 * USEC_PER_SEC);
+ if (ret)
+ dev_err(cw_bat->dev,
+ "Gauge did not become ready after profile upload\n");
+ else
+ dev_dbg(cw_bat->dev, "Battery profile updated\n");
+
+ return ret;
+}
+
+static int cw_init(struct cw_battery *cw_bat)
+{
+ int ret;
+ unsigned int reg_val = CW2015_MODE_SLEEP;
+
+ if ((reg_val & CW2015_MODE_SLEEP_MASK) == CW2015_MODE_SLEEP) {
+ reg_val = CW2015_MODE_NORMAL;
+ ret = regmap_write(cw_bat->regmap, CW2015_REG_MODE, reg_val);
+ if (ret)
+ return ret;
+ }
+
+ ret = regmap_read(cw_bat->regmap, CW2015_REG_CONFIG, &reg_val);
+ if (ret)
+ return ret;
+
+ if ((reg_val & CW2015_MASK_ATHD) != CW2015_ATHD(cw_bat->alert_level)) {
+ dev_dbg(cw_bat->dev, "Setting new alert level\n");
+ reg_val &= ~CW2015_MASK_ATHD;
+ reg_val |= ~CW2015_ATHD(cw_bat->alert_level);
+ ret = regmap_write(cw_bat->regmap, CW2015_REG_CONFIG, reg_val);
+ if (ret)
+ return ret;
+ }
+
+ ret = regmap_read(cw_bat->regmap, CW2015_REG_CONFIG, &reg_val);
+ if (ret)
+ return ret;
+
+ if (!(reg_val & CW2015_CONFIG_UPDATE_FLG)) {
+ dev_dbg(cw_bat->dev,
+ "Battery profile not present, uploading battery profile\n");
+ if (cw_bat->bat_profile) {
+ ret = cw_update_profile(cw_bat);
+ if (ret) {
+ dev_err(cw_bat->dev,
+ "Failed to upload battery profile\n");
+ return ret;
+ }
+ } else {
+ dev_warn(cw_bat->dev,
+ "No profile specified, continuing without profile\n");
+ }
+ } else if (cw_bat->bat_profile) {
+ u8 bat_info[CW2015_SIZE_BATINFO];
+
+ ret = regmap_raw_read(cw_bat->regmap, CW2015_REG_BATINFO,
+ bat_info, CW2015_SIZE_BATINFO);
+ if (ret) {
+ dev_err(cw_bat->dev,
+ "Failed to read stored battery profile\n");
+ return ret;
+ }
+
+ if (memcmp(bat_info, cw_bat->bat_profile, CW2015_SIZE_BATINFO)) {
+ dev_warn(cw_bat->dev, "Replacing stored battery profile\n");
+ ret = cw_update_profile(cw_bat);
+ if (ret)
+ return ret;
+ }
+ } else {
+ dev_warn(cw_bat->dev,
+ "Can't check current battery profile, no profile provided\n");
+ }
+
+ dev_dbg(cw_bat->dev, "Battery profile configured\n");
+ return 0;
+}
+
+static int cw_power_on_reset(struct cw_battery *cw_bat)
+{
+ int ret;
+ unsigned char reset_val;
+
+ reset_val = CW2015_MODE_SLEEP;
+ ret = regmap_write(cw_bat->regmap, CW2015_REG_MODE, reset_val);
+ if (ret)
+ return ret;
+
+ /* wait for gauge to enter sleep */
+ msleep(20);
+
+ reset_val = CW2015_MODE_NORMAL;
+ ret = regmap_write(cw_bat->regmap, CW2015_REG_MODE, reset_val);
+ if (ret)
+ return ret;
+
+ ret = cw_init(cw_bat);
+ if (ret)
+ return ret;
+ return 0;
+}
+
+#define HYSTERESIS(current, previous, up, down) \
+ (((current) < (previous) + (up)) && ((current) > (previous) - (down)))
+
+static int cw_get_soc(struct cw_battery *cw_bat)
+{
+ unsigned int soc;
+ int ret;
+
+ ret = regmap_read(cw_bat->regmap, CW2015_REG_SOC, &soc);
+ if (ret)
+ return ret;
+
+ if (soc > 100) {
+ int max_error_cycles =
+ CW2015_BAT_SOC_ERROR_MS / cw_bat->poll_interval_ms;
+
+ dev_err(cw_bat->dev, "Invalid SoC %d%%\n", soc);
+ cw_bat->read_errors++;
+ if (cw_bat->read_errors > max_error_cycles) {
+ dev_warn(cw_bat->dev,
+ "Too many invalid SoC reports, resetting gauge\n");
+ cw_power_on_reset(cw_bat);
+ cw_bat->read_errors = 0;
+ }
+ return cw_bat->soc;
+ }
+ cw_bat->read_errors = 0;
+
+ /* Reset gauge if stuck while charging */
+ if (cw_bat->status == POWER_SUPPLY_STATUS_CHARGING && soc == cw_bat->soc) {
+ int max_stuck_cycles =
+ CW2015_BAT_CHARGING_STUCK_MS / cw_bat->poll_interval_ms;
+
+ cw_bat->charge_stuck_cnt++;
+ if (cw_bat->charge_stuck_cnt > max_stuck_cycles) {
+ dev_warn(cw_bat->dev,
+ "SoC stuck @%u%%, resetting gauge\n", soc);
+ cw_power_on_reset(cw_bat);
+ cw_bat->charge_stuck_cnt = 0;
+ }
+ } else {
+ cw_bat->charge_stuck_cnt = 0;
+ }
+
+ /* Ignore voltage dips during charge */
+ if (cw_bat->charger_attached && HYSTERESIS(soc, cw_bat->soc, 0, 3))
+ soc = cw_bat->soc;
+
+ /* Ignore voltage spikes during discharge */
+ if (!cw_bat->charger_attached && HYSTERESIS(soc, cw_bat->soc, 3, 0))
+ soc = cw_bat->soc;
+
+ return soc;
+}
+
+static int cw_get_voltage(struct cw_battery *cw_bat)
+{
+ int ret, i, voltage_mv;
+ u16 reg_val;
+ u32 avg = 0;
+
+ for (i = 0; i < CW2015_AVERAGING_SAMPLES; i++) {
+ ret = cw_read_word(cw_bat, CW2015_REG_VCELL, &reg_val);
+ if (ret)
+ return ret;
+
+ avg += reg_val;
+ }
+ avg /= CW2015_AVERAGING_SAMPLES;
+
+ /*
+ * 305 uV per ADC step
+ * Use 312 / 1024 as efficient approximation of 305 / 1000
+ * Negligible error of 0.1%
+ */
+ voltage_mv = avg * 312 / 1024;
+
+ dev_dbg(cw_bat->dev, "Read voltage: %d mV, raw=0x%04x\n",
+ voltage_mv, reg_val);
+ return voltage_mv;
+}
+
+static int cw_get_time_to_empty(struct cw_battery *cw_bat)
+{
+ int ret;
+ u16 value16;
+
+ ret = cw_read_word(cw_bat, CW2015_REG_RRT_ALERT, &value16);
+ if (ret)
+ return ret;
+
+ return value16 & CW2015_MASK_SOC;
+}
+
+static void cw_update_charge_status(struct cw_battery *cw_bat)
+{
+ int ret;
+
+ ret = power_supply_am_i_supplied(cw_bat->rk_bat);
+ if (ret < 0) {
+ dev_warn(cw_bat->dev, "Failed to get supply state: %d\n", ret);
+ } else {
+ bool charger_attached;
+
+ charger_attached = !!ret;
+ if (cw_bat->charger_attached != charger_attached) {
+ cw_bat->battery_changed = true;
+ if (charger_attached)
+ cw_bat->charge_count++;
+ }
+ cw_bat->charger_attached = charger_attached;
+ }
+}
+
+static void cw_update_soc(struct cw_battery *cw_bat)
+{
+ int soc;
+
+ soc = cw_get_soc(cw_bat);
+ if (soc < 0)
+ dev_err(cw_bat->dev, "Failed to get SoC from gauge: %d\n", soc);
+ else if (cw_bat->soc != soc) {
+ cw_bat->soc = soc;
+ cw_bat->battery_changed = true;
+ }
+}
+
+static void cw_update_voltage(struct cw_battery *cw_bat)
+{
+ int voltage_mv;
+
+ voltage_mv = cw_get_voltage(cw_bat);
+ if (voltage_mv < 0)
+ dev_err(cw_bat->dev, "Failed to get voltage from gauge: %d\n",
+ voltage_mv);
+ else
+ cw_bat->voltage_mv = voltage_mv;
+}
+
+static void cw_update_status(struct cw_battery *cw_bat)
+{
+ int status = POWER_SUPPLY_STATUS_DISCHARGING;
+
+ if (cw_bat->charger_attached) {
+ if (cw_bat->soc >= 100)
+ status = POWER_SUPPLY_STATUS_FULL;
+ else
+ status = POWER_SUPPLY_STATUS_CHARGING;
+ }
+
+ if (cw_bat->status != status)
+ cw_bat->battery_changed = true;
+ cw_bat->status = status;
+}
+
+static void cw_update_time_to_empty(struct cw_battery *cw_bat)
+{
+ int time_to_empty;
+
+ time_to_empty = cw_get_time_to_empty(cw_bat);
+ if (time_to_empty < 0)
+ dev_err(cw_bat->dev, "Failed to get time to empty from gauge: %d\n",
+ time_to_empty);
+ else if (cw_bat->time_to_empty != time_to_empty) {
+ cw_bat->time_to_empty = time_to_empty;
+ cw_bat->battery_changed = true;
+ }
+}
+
+static void cw_bat_work(struct work_struct *work)
+{
+ struct delayed_work *delay_work;
+ struct cw_battery *cw_bat;
+ int ret;
+ unsigned int reg_val;
+
+ delay_work = to_delayed_work(work);
+ cw_bat = container_of(delay_work, struct cw_battery, battery_delay_work);
+ ret = regmap_read(cw_bat->regmap, CW2015_REG_MODE, &reg_val);
+ if (ret) {
+ dev_err(cw_bat->dev, "Failed to read mode from gauge: %d\n", ret);
+ } else {
+ if ((reg_val & CW2015_MODE_SLEEP_MASK) == CW2015_MODE_SLEEP) {
+ int i;
+
+ for (i = 0; i < CW2015_RESET_TRIES; i++) {
+ if (!cw_power_on_reset(cw_bat))
+ break;
+ }
+ }
+ cw_update_soc(cw_bat);
+ cw_update_voltage(cw_bat);
+ cw_update_charge_status(cw_bat);
+ cw_update_status(cw_bat);
+ cw_update_time_to_empty(cw_bat);
+ }
+ dev_dbg(cw_bat->dev, "charger_attached = %d\n", cw_bat->charger_attached);
+ dev_dbg(cw_bat->dev, "status = %d\n", cw_bat->status);
+ dev_dbg(cw_bat->dev, "soc = %d%%\n", cw_bat->soc);
+ dev_dbg(cw_bat->dev, "voltage = %dmV\n", cw_bat->voltage_mv);
+
+ if (cw_bat->battery_changed)
+ power_supply_changed(cw_bat->rk_bat);
+ cw_bat->battery_changed = false;
+
+ queue_delayed_work(cw_bat->battery_workqueue,
+ &cw_bat->battery_delay_work,
+ msecs_to_jiffies(cw_bat->poll_interval_ms));
+}
+
+static bool cw_battery_valid_time_to_empty(struct cw_battery *cw_bat)
+{
+ return cw_bat->time_to_empty > 0 &&
+ cw_bat->time_to_empty < CW2015_MASK_SOC &&
+ cw_bat->status == POWER_SUPPLY_STATUS_DISCHARGING;
+}
+
+static int cw_battery_get_property(struct power_supply *psy,
+ enum power_supply_property psp,
+ union power_supply_propval *val)
+{
+ struct cw_battery *cw_bat;
+
+ cw_bat = power_supply_get_drvdata(psy);
+ switch (psp) {
+ case POWER_SUPPLY_PROP_CAPACITY:
+ val->intval = cw_bat->soc;
+ break;
+
+ case POWER_SUPPLY_PROP_STATUS:
+ val->intval = cw_bat->status;
+ break;
+
+ case POWER_SUPPLY_PROP_PRESENT:
+ val->intval = !!cw_bat->voltage_mv;
+ break;
+
+ case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+ val->intval = cw_bat->voltage_mv * 1000;
+ break;
+
+ case POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW:
+ if (cw_battery_valid_time_to_empty(cw_bat))
+ val->intval = cw_bat->time_to_empty * 60;
+ else
+ val->intval = 0;
+ break;
+
+ case POWER_SUPPLY_PROP_TECHNOLOGY:
+ val->intval = POWER_SUPPLY_TECHNOLOGY_LION;
+ break;
+
+ case POWER_SUPPLY_PROP_CHARGE_COUNTER:
+ val->intval = cw_bat->charge_count;
+ break;
+
+ case POWER_SUPPLY_PROP_CHARGE_FULL:
+ case POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN:
+ if (cw_bat->battery.charge_full_design_uah > 0)
+ val->intval = cw_bat->battery.charge_full_design_uah;
+ else
+ val->intval = 0;
+ break;
+
+ case POWER_SUPPLY_PROP_CURRENT_NOW:
+ if (cw_battery_valid_time_to_empty(cw_bat) &&
+ cw_bat->battery.charge_full_design_uah > 0) {
+ /* calculate remaining capacity */
+ val->intval = cw_bat->battery.charge_full_design_uah;
+ val->intval = val->intval * cw_bat->soc / 100;
+
+ /* estimate current based on time to empty */
+ val->intval = 60 * val->intval / cw_bat->time_to_empty;
+ } else {
+ val->intval = 0;
+ }
+
+ break;
+
+ default:
+ break;
+ }
+ return 0;
+}
+
+static enum power_supply_property cw_battery_properties[] = {
+ POWER_SUPPLY_PROP_CAPACITY,
+ POWER_SUPPLY_PROP_STATUS,
+ POWER_SUPPLY_PROP_PRESENT,
+ POWER_SUPPLY_PROP_VOLTAGE_NOW,
+ POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW,
+ POWER_SUPPLY_PROP_TECHNOLOGY,
+ POWER_SUPPLY_PROP_CHARGE_COUNTER,
+ POWER_SUPPLY_PROP_CHARGE_FULL,
+ POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN,
+ POWER_SUPPLY_PROP_CURRENT_NOW,
+};
+
+static const struct power_supply_desc cw2015_bat_desc = {
+ .name = "cw2015-battery",
+ .type = POWER_SUPPLY_TYPE_BATTERY,
+ .properties = cw_battery_properties,
+ .num_properties = ARRAY_SIZE(cw_battery_properties),
+ .get_property = cw_battery_get_property,
+};
+
+static int cw2015_parse_properties(struct cw_battery *cw_bat)
+{
+ struct device *dev = cw_bat->dev;
+ int length;
+ int ret;
+
+ length = device_property_count_u8(dev, "cellwise,battery-profile");
+ if (length < 0) {
+ dev_warn(cw_bat->dev,
+ "No battery-profile found, using current flash contents\n");
+ } else if (length != CW2015_SIZE_BATINFO) {
+ dev_err(cw_bat->dev, "battery-profile must be %d bytes\n",
+ CW2015_SIZE_BATINFO);
+ return -EINVAL;
+ } else {
+ cw_bat->bat_profile = devm_kzalloc(dev, length, GFP_KERNEL);
+ if (!cw_bat->bat_profile)
+ return -ENOMEM;
+
+ ret = device_property_read_u8_array(dev,
+ "cellwise,battery-profile",
+ cw_bat->bat_profile,
+ length);
+ if (ret)
+ return ret;
+ }
+
+ ret = device_property_read_u32(dev, "cellwise,monitor-interval-ms",
+ &cw_bat->poll_interval_ms);
+ if (ret) {
+ dev_dbg(cw_bat->dev, "Using default poll interval\n");
+ cw_bat->poll_interval_ms = CW2015_DEFAULT_POLL_INTERVAL_MS;
+ }
+
+ return 0;
+}
+
+static const struct regmap_range regmap_ranges_rd_yes[] = {
+ regmap_reg_range(CW2015_REG_VERSION, CW2015_REG_VERSION),
+ regmap_reg_range(CW2015_REG_VCELL, CW2015_REG_CONFIG),
+ regmap_reg_range(CW2015_REG_MODE, CW2015_REG_MODE),
+ regmap_reg_range(CW2015_REG_BATINFO,
+ CW2015_REG_BATINFO + CW2015_SIZE_BATINFO - 1),
+};
+
+static const struct regmap_access_table regmap_rd_table = {
+ .yes_ranges = regmap_ranges_rd_yes,
+ .n_yes_ranges = 4,
+};
+
+static const struct regmap_range regmap_ranges_wr_yes[] = {
+ regmap_reg_range(CW2015_REG_RRT_ALERT, CW2015_REG_CONFIG),
+ regmap_reg_range(CW2015_REG_MODE, CW2015_REG_MODE),
+ regmap_reg_range(CW2015_REG_BATINFO,
+ CW2015_REG_BATINFO + CW2015_SIZE_BATINFO - 1),
+};
+
+static const struct regmap_access_table regmap_wr_table = {
+ .yes_ranges = regmap_ranges_wr_yes,
+ .n_yes_ranges = 3,
+};
+
+static const struct regmap_range regmap_ranges_vol_yes[] = {
+ regmap_reg_range(CW2015_REG_VCELL, CW2015_REG_SOC + 1),
+};
+
+static const struct regmap_access_table regmap_vol_table = {
+ .yes_ranges = regmap_ranges_vol_yes,
+ .n_yes_ranges = 1,
+};
+
+static const struct regmap_config cw2015_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+ .rd_table = &regmap_rd_table,
+ .wr_table = &regmap_wr_table,
+ .volatile_table = &regmap_vol_table,
+ .max_register = CW2015_REG_BATINFO + CW2015_SIZE_BATINFO - 1,
+};
+
+static int cw_bat_probe(struct i2c_client *client)
+{
+ int ret;
+ struct cw_battery *cw_bat;
+ struct power_supply_config psy_cfg = { 0 };
+
+ cw_bat = devm_kzalloc(&client->dev, sizeof(*cw_bat), GFP_KERNEL);
+ if (!cw_bat)
+ return -ENOMEM;
+
+ i2c_set_clientdata(client, cw_bat);
+ cw_bat->dev = &client->dev;
+ cw_bat->soc = 1;
+
+ ret = cw2015_parse_properties(cw_bat);
+ if (ret) {
+ dev_err(cw_bat->dev, "Failed to parse cw2015 properties\n");
+ return ret;
+ }
+
+ cw_bat->regmap = devm_regmap_init_i2c(client, &cw2015_regmap_config);
+ if (IS_ERR(cw_bat->regmap)) {
+ dev_err(cw_bat->dev, "Failed to allocate regmap: %ld\n",
+ PTR_ERR(cw_bat->regmap));
+ return PTR_ERR(cw_bat->regmap);
+ }
+
+ ret = cw_init(cw_bat);
+ if (ret) {
+ dev_err(cw_bat->dev, "Init failed: %d\n", ret);
+ return ret;
+ }
+
+ psy_cfg.drv_data = cw_bat;
+ psy_cfg.fwnode = dev_fwnode(cw_bat->dev);
+
+ cw_bat->rk_bat = devm_power_supply_register(&client->dev,
+ &cw2015_bat_desc,
+ &psy_cfg);
+ if (IS_ERR(cw_bat->rk_bat)) {
+ /* try again if this happens */
+ dev_err_probe(&client->dev, PTR_ERR(cw_bat->rk_bat),
+ "Failed to register power supply\n");
+ return PTR_ERR(cw_bat->rk_bat);
+ }
+
+ ret = power_supply_get_battery_info(cw_bat->rk_bat, &cw_bat->battery);
+ if (ret) {
+ dev_warn(cw_bat->dev,
+ "No monitored battery, some properties will be missing\n");
+ }
+
+ cw_bat->battery_workqueue = create_singlethread_workqueue("rk_battery");
+ INIT_DELAYED_WORK(&cw_bat->battery_delay_work, cw_bat_work);
+ queue_delayed_work(cw_bat->battery_workqueue,
+ &cw_bat->battery_delay_work, msecs_to_jiffies(10));
+ return 0;
+}
+
+static int __maybe_unused cw_bat_suspend(struct device *dev)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct cw_battery *cw_bat = i2c_get_clientdata(client);
+
+ cancel_delayed_work_sync(&cw_bat->battery_delay_work);
+ return 0;
+}
+
+static int __maybe_unused cw_bat_resume(struct device *dev)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct cw_battery *cw_bat = i2c_get_clientdata(client);
+
+ queue_delayed_work(cw_bat->battery_workqueue,
+ &cw_bat->battery_delay_work, 0);
+ return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(cw_bat_pm_ops, cw_bat_suspend, cw_bat_resume);
+
+static int cw_bat_remove(struct i2c_client *client)
+{
+ struct cw_battery *cw_bat = i2c_get_clientdata(client);
+
+ cancel_delayed_work_sync(&cw_bat->battery_delay_work);
+ power_supply_put_battery_info(cw_bat->rk_bat, &cw_bat->battery);
+ return 0;
+}
+
+static const struct i2c_device_id cw_bat_id_table[] = {
+ { "cw2015", 0 },
+ { }
+};
+
+static const struct of_device_id cw2015_of_match[] = {
+ { .compatible = "cellwise,cw2015" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, cw2015_of_match);
+
+static struct i2c_driver cw_bat_driver = {
+ .driver = {
+ .name = "cw2015",
+ .of_match_table = cw2015_of_match,
+ .pm = &cw_bat_pm_ops,
+ },
+ .probe_new = cw_bat_probe,
+ .remove = cw_bat_remove,
+ .id_table = cw_bat_id_table,
+};
+
+module_i2c_driver(cw_bat_driver);
+
+MODULE_AUTHOR("xhc<xhc@rock-chips.com>");
+MODULE_AUTHOR("Tobias Schramm <t.schramm@manjaro.org>");
+MODULE_DESCRIPTION("cw2015/cw2013 battery driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/power/supply/da9030_battery.c b/drivers/power/supply/da9030_battery.c
new file mode 100644
index 000000000..0deba48d2
--- /dev/null
+++ b/drivers/power/supply/da9030_battery.c
@@ -0,0 +1,583 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Battery charger driver for Dialog Semiconductor DA9030
+ *
+ * Copyright (C) 2008 Compulab, Ltd.
+ * Mike Rapoport <mike@compulab.co.il>
+ */
+
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/device.h>
+#include <linux/workqueue.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/power_supply.h>
+#include <linux/mfd/da903x.h>
+
+#include <linux/debugfs.h>
+#include <linux/seq_file.h>
+#include <linux/notifier.h>
+
+#define DA9030_FAULT_LOG 0x0a
+#define DA9030_FAULT_LOG_OVER_TEMP (1 << 7)
+#define DA9030_FAULT_LOG_VBAT_OVER (1 << 4)
+
+#define DA9030_CHARGE_CONTROL 0x28
+#define DA9030_CHRG_CHARGER_ENABLE (1 << 7)
+
+#define DA9030_ADC_MAN_CONTROL 0x30
+#define DA9030_ADC_TBATREF_ENABLE (1 << 5)
+#define DA9030_ADC_LDO_INT_ENABLE (1 << 4)
+
+#define DA9030_ADC_AUTO_CONTROL 0x31
+#define DA9030_ADC_TBAT_ENABLE (1 << 5)
+#define DA9030_ADC_VBAT_IN_TXON (1 << 4)
+#define DA9030_ADC_VCH_ENABLE (1 << 3)
+#define DA9030_ADC_ICH_ENABLE (1 << 2)
+#define DA9030_ADC_VBAT_ENABLE (1 << 1)
+#define DA9030_ADC_AUTO_SLEEP_ENABLE (1 << 0)
+
+#define DA9030_VBATMON 0x32
+#define DA9030_VBATMONTXON 0x33
+#define DA9030_TBATHIGHP 0x34
+#define DA9030_TBATHIGHN 0x35
+#define DA9030_TBATLOW 0x36
+
+#define DA9030_VBAT_RES 0x41
+#define DA9030_VBATMIN_RES 0x42
+#define DA9030_VBATMINTXON_RES 0x43
+#define DA9030_ICHMAX_RES 0x44
+#define DA9030_ICHMIN_RES 0x45
+#define DA9030_ICHAVERAGE_RES 0x46
+#define DA9030_VCHMAX_RES 0x47
+#define DA9030_VCHMIN_RES 0x48
+#define DA9030_TBAT_RES 0x49
+
+struct da9030_adc_res {
+ uint8_t vbat_res;
+ uint8_t vbatmin_res;
+ uint8_t vbatmintxon;
+ uint8_t ichmax_res;
+ uint8_t ichmin_res;
+ uint8_t ichaverage_res;
+ uint8_t vchmax_res;
+ uint8_t vchmin_res;
+ uint8_t tbat_res;
+ uint8_t adc_in4_res;
+ uint8_t adc_in5_res;
+};
+
+struct da9030_battery_thresholds {
+ int tbat_low;
+ int tbat_high;
+ int tbat_restart;
+
+ int vbat_low;
+ int vbat_crit;
+ int vbat_charge_start;
+ int vbat_charge_stop;
+ int vbat_charge_restart;
+
+ int vcharge_min;
+ int vcharge_max;
+};
+
+struct da9030_charger {
+ struct power_supply *psy;
+ struct power_supply_desc psy_desc;
+
+ struct device *master;
+
+ struct da9030_adc_res adc;
+ struct delayed_work work;
+ unsigned int interval;
+
+ struct power_supply_info *battery_info;
+
+ struct da9030_battery_thresholds thresholds;
+
+ unsigned int charge_milliamp;
+ unsigned int charge_millivolt;
+
+ /* charger status */
+ bool chdet;
+ uint8_t fault;
+ int mA;
+ int mV;
+ bool is_on;
+
+ struct notifier_block nb;
+
+ /* platform callbacks for battery low and critical events */
+ void (*battery_low)(void);
+ void (*battery_critical)(void);
+
+ struct dentry *debug_file;
+};
+
+static inline int da9030_reg_to_mV(int reg)
+{
+ return ((reg * 2650) >> 8) + 2650;
+}
+
+static inline int da9030_millivolt_to_reg(int mV)
+{
+ return ((mV - 2650) << 8) / 2650;
+}
+
+static inline int da9030_reg_to_mA(int reg)
+{
+ return ((reg * 24000) >> 8) / 15;
+}
+
+#ifdef CONFIG_DEBUG_FS
+static int bat_debug_show(struct seq_file *s, void *data)
+{
+ struct da9030_charger *charger = s->private;
+
+ seq_printf(s, "charger is %s\n", charger->is_on ? "on" : "off");
+ if (charger->chdet) {
+ seq_printf(s, "iset = %dmA, vset = %dmV\n",
+ charger->mA, charger->mV);
+ }
+
+ seq_printf(s, "vbat_res = %d (%dmV)\n",
+ charger->adc.vbat_res,
+ da9030_reg_to_mV(charger->adc.vbat_res));
+ seq_printf(s, "vbatmin_res = %d (%dmV)\n",
+ charger->adc.vbatmin_res,
+ da9030_reg_to_mV(charger->adc.vbatmin_res));
+ seq_printf(s, "vbatmintxon = %d (%dmV)\n",
+ charger->adc.vbatmintxon,
+ da9030_reg_to_mV(charger->adc.vbatmintxon));
+ seq_printf(s, "ichmax_res = %d (%dmA)\n",
+ charger->adc.ichmax_res,
+ da9030_reg_to_mV(charger->adc.ichmax_res));
+ seq_printf(s, "ichmin_res = %d (%dmA)\n",
+ charger->adc.ichmin_res,
+ da9030_reg_to_mA(charger->adc.ichmin_res));
+ seq_printf(s, "ichaverage_res = %d (%dmA)\n",
+ charger->adc.ichaverage_res,
+ da9030_reg_to_mA(charger->adc.ichaverage_res));
+ seq_printf(s, "vchmax_res = %d (%dmV)\n",
+ charger->adc.vchmax_res,
+ da9030_reg_to_mA(charger->adc.vchmax_res));
+ seq_printf(s, "vchmin_res = %d (%dmV)\n",
+ charger->adc.vchmin_res,
+ da9030_reg_to_mV(charger->adc.vchmin_res));
+
+ return 0;
+}
+
+DEFINE_SHOW_ATTRIBUTE(bat_debug);
+
+static struct dentry *da9030_bat_create_debugfs(struct da9030_charger *charger)
+{
+ charger->debug_file = debugfs_create_file("charger", 0666, NULL,
+ charger, &bat_debug_fops);
+ return charger->debug_file;
+}
+
+static void da9030_bat_remove_debugfs(struct da9030_charger *charger)
+{
+ debugfs_remove(charger->debug_file);
+}
+#else
+static inline struct dentry *da9030_bat_create_debugfs(struct da9030_charger *charger)
+{
+ return NULL;
+}
+static inline void da9030_bat_remove_debugfs(struct da9030_charger *charger)
+{
+}
+#endif
+
+static inline void da9030_read_adc(struct da9030_charger *charger,
+ struct da9030_adc_res *adc)
+{
+ da903x_reads(charger->master, DA9030_VBAT_RES,
+ sizeof(*adc), (uint8_t *)adc);
+}
+
+static void da9030_charger_update_state(struct da9030_charger *charger)
+{
+ uint8_t val;
+
+ da903x_read(charger->master, DA9030_CHARGE_CONTROL, &val);
+ charger->is_on = (val & DA9030_CHRG_CHARGER_ENABLE) ? 1 : 0;
+ charger->mA = ((val >> 3) & 0xf) * 100;
+ charger->mV = (val & 0x7) * 50 + 4000;
+
+ da9030_read_adc(charger, &charger->adc);
+ da903x_read(charger->master, DA9030_FAULT_LOG, &charger->fault);
+ charger->chdet = da903x_query_status(charger->master,
+ DA9030_STATUS_CHDET);
+}
+
+static void da9030_set_charge(struct da9030_charger *charger, int on)
+{
+ uint8_t val;
+
+ if (on) {
+ val = DA9030_CHRG_CHARGER_ENABLE;
+ val |= (charger->charge_milliamp / 100) << 3;
+ val |= (charger->charge_millivolt - 4000) / 50;
+ charger->is_on = 1;
+ } else {
+ val = 0;
+ charger->is_on = 0;
+ }
+
+ da903x_write(charger->master, DA9030_CHARGE_CONTROL, val);
+
+ power_supply_changed(charger->psy);
+}
+
+static void da9030_charger_check_state(struct da9030_charger *charger)
+{
+ da9030_charger_update_state(charger);
+
+ /* we wake or boot with external power on */
+ if (!charger->is_on) {
+ if ((charger->chdet) &&
+ (charger->adc.vbat_res <
+ charger->thresholds.vbat_charge_start)) {
+ da9030_set_charge(charger, 1);
+ }
+ } else {
+ /* Charger has been pulled out */
+ if (!charger->chdet) {
+ da9030_set_charge(charger, 0);
+ return;
+ }
+
+ if (charger->adc.vbat_res >=
+ charger->thresholds.vbat_charge_stop) {
+ da9030_set_charge(charger, 0);
+ da903x_write(charger->master, DA9030_VBATMON,
+ charger->thresholds.vbat_charge_restart);
+ } else if (charger->adc.vbat_res >
+ charger->thresholds.vbat_low) {
+ /* we are charging and passed LOW_THRESH,
+ so upate DA9030 VBAT threshold
+ */
+ da903x_write(charger->master, DA9030_VBATMON,
+ charger->thresholds.vbat_low);
+ }
+ if (charger->adc.vchmax_res > charger->thresholds.vcharge_max ||
+ charger->adc.vchmin_res < charger->thresholds.vcharge_min ||
+ /* Tempreture readings are negative */
+ charger->adc.tbat_res < charger->thresholds.tbat_high ||
+ charger->adc.tbat_res > charger->thresholds.tbat_low) {
+ /* disable charger */
+ da9030_set_charge(charger, 0);
+ }
+ }
+}
+
+static void da9030_charging_monitor(struct work_struct *work)
+{
+ struct da9030_charger *charger;
+
+ charger = container_of(work, struct da9030_charger, work.work);
+
+ da9030_charger_check_state(charger);
+
+ /* reschedule for the next time */
+ schedule_delayed_work(&charger->work, charger->interval);
+}
+
+static enum power_supply_property da9030_battery_props[] = {
+ POWER_SUPPLY_PROP_MODEL_NAME,
+ POWER_SUPPLY_PROP_STATUS,
+ POWER_SUPPLY_PROP_HEALTH,
+ POWER_SUPPLY_PROP_TECHNOLOGY,
+ POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN,
+ POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN,
+ POWER_SUPPLY_PROP_VOLTAGE_NOW,
+ POWER_SUPPLY_PROP_CURRENT_AVG,
+};
+
+static void da9030_battery_check_status(struct da9030_charger *charger,
+ union power_supply_propval *val)
+{
+ if (charger->chdet) {
+ if (charger->is_on)
+ val->intval = POWER_SUPPLY_STATUS_CHARGING;
+ else
+ val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING;
+ } else {
+ val->intval = POWER_SUPPLY_STATUS_DISCHARGING;
+ }
+}
+
+static void da9030_battery_check_health(struct da9030_charger *charger,
+ union power_supply_propval *val)
+{
+ if (charger->fault & DA9030_FAULT_LOG_OVER_TEMP)
+ val->intval = POWER_SUPPLY_HEALTH_OVERHEAT;
+ else if (charger->fault & DA9030_FAULT_LOG_VBAT_OVER)
+ val->intval = POWER_SUPPLY_HEALTH_OVERVOLTAGE;
+ else
+ val->intval = POWER_SUPPLY_HEALTH_GOOD;
+}
+
+static int da9030_battery_get_property(struct power_supply *psy,
+ enum power_supply_property psp,
+ union power_supply_propval *val)
+{
+ struct da9030_charger *charger = power_supply_get_drvdata(psy);
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_STATUS:
+ da9030_battery_check_status(charger, val);
+ break;
+ case POWER_SUPPLY_PROP_HEALTH:
+ da9030_battery_check_health(charger, val);
+ break;
+ case POWER_SUPPLY_PROP_TECHNOLOGY:
+ val->intval = charger->battery_info->technology;
+ break;
+ case POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN:
+ val->intval = charger->battery_info->voltage_max_design;
+ break;
+ case POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN:
+ val->intval = charger->battery_info->voltage_min_design;
+ break;
+ case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+ val->intval = da9030_reg_to_mV(charger->adc.vbat_res) * 1000;
+ break;
+ case POWER_SUPPLY_PROP_CURRENT_AVG:
+ val->intval =
+ da9030_reg_to_mA(charger->adc.ichaverage_res) * 1000;
+ break;
+ case POWER_SUPPLY_PROP_MODEL_NAME:
+ val->strval = charger->battery_info->name;
+ break;
+ default:
+ break;
+ }
+
+ return 0;
+}
+
+static void da9030_battery_vbat_event(struct da9030_charger *charger)
+{
+ da9030_read_adc(charger, &charger->adc);
+
+ if (charger->is_on)
+ return;
+
+ if (charger->adc.vbat_res < charger->thresholds.vbat_low) {
+ /* set VBAT threshold for critical */
+ da903x_write(charger->master, DA9030_VBATMON,
+ charger->thresholds.vbat_crit);
+ if (charger->battery_low)
+ charger->battery_low();
+ } else if (charger->adc.vbat_res <
+ charger->thresholds.vbat_crit) {
+ /* notify the system of battery critical */
+ if (charger->battery_critical)
+ charger->battery_critical();
+ }
+}
+
+static int da9030_battery_event(struct notifier_block *nb, unsigned long event,
+ void *data)
+{
+ struct da9030_charger *charger =
+ container_of(nb, struct da9030_charger, nb);
+
+ switch (event) {
+ case DA9030_EVENT_CHDET:
+ cancel_delayed_work_sync(&charger->work);
+ schedule_work(&charger->work.work);
+ break;
+ case DA9030_EVENT_VBATMON:
+ da9030_battery_vbat_event(charger);
+ break;
+ case DA9030_EVENT_CHIOVER:
+ case DA9030_EVENT_TBAT:
+ da9030_set_charge(charger, 0);
+ break;
+ }
+
+ return 0;
+}
+
+static void da9030_battery_convert_thresholds(struct da9030_charger *charger,
+ struct da9030_battery_info *pdata)
+{
+ charger->thresholds.tbat_low = pdata->tbat_low;
+ charger->thresholds.tbat_high = pdata->tbat_high;
+ charger->thresholds.tbat_restart = pdata->tbat_restart;
+
+ charger->thresholds.vbat_low =
+ da9030_millivolt_to_reg(pdata->vbat_low);
+ charger->thresholds.vbat_crit =
+ da9030_millivolt_to_reg(pdata->vbat_crit);
+ charger->thresholds.vbat_charge_start =
+ da9030_millivolt_to_reg(pdata->vbat_charge_start);
+ charger->thresholds.vbat_charge_stop =
+ da9030_millivolt_to_reg(pdata->vbat_charge_stop);
+ charger->thresholds.vbat_charge_restart =
+ da9030_millivolt_to_reg(pdata->vbat_charge_restart);
+
+ charger->thresholds.vcharge_min =
+ da9030_millivolt_to_reg(pdata->vcharge_min);
+ charger->thresholds.vcharge_max =
+ da9030_millivolt_to_reg(pdata->vcharge_max);
+}
+
+static void da9030_battery_setup_psy(struct da9030_charger *charger)
+{
+ struct power_supply_desc *psy_desc = &charger->psy_desc;
+ struct power_supply_info *info = charger->battery_info;
+
+ psy_desc->name = info->name;
+ psy_desc->use_for_apm = info->use_for_apm;
+ psy_desc->type = POWER_SUPPLY_TYPE_BATTERY;
+ psy_desc->get_property = da9030_battery_get_property;
+
+ psy_desc->properties = da9030_battery_props;
+ psy_desc->num_properties = ARRAY_SIZE(da9030_battery_props);
+};
+
+static int da9030_battery_charger_init(struct da9030_charger *charger)
+{
+ char v[5];
+ int ret;
+
+ v[0] = v[1] = charger->thresholds.vbat_low;
+ v[2] = charger->thresholds.tbat_high;
+ v[3] = charger->thresholds.tbat_restart;
+ v[4] = charger->thresholds.tbat_low;
+
+ ret = da903x_writes(charger->master, DA9030_VBATMON, 5, v);
+ if (ret)
+ return ret;
+
+ /*
+ * Enable reference voltage supply for ADC from the LDO_INTERNAL
+ * regulator. Must be set before ADC measurements can be made.
+ */
+ ret = da903x_write(charger->master, DA9030_ADC_MAN_CONTROL,
+ DA9030_ADC_LDO_INT_ENABLE |
+ DA9030_ADC_TBATREF_ENABLE);
+ if (ret)
+ return ret;
+
+ /* enable auto ADC measuremnts */
+ return da903x_write(charger->master, DA9030_ADC_AUTO_CONTROL,
+ DA9030_ADC_TBAT_ENABLE | DA9030_ADC_VBAT_IN_TXON |
+ DA9030_ADC_VCH_ENABLE | DA9030_ADC_ICH_ENABLE |
+ DA9030_ADC_VBAT_ENABLE |
+ DA9030_ADC_AUTO_SLEEP_ENABLE);
+}
+
+static int da9030_battery_probe(struct platform_device *pdev)
+{
+ struct da9030_charger *charger;
+ struct power_supply_config psy_cfg = {};
+ struct da9030_battery_info *pdata = pdev->dev.platform_data;
+ int ret;
+
+ if (pdata == NULL)
+ return -EINVAL;
+
+ if (pdata->charge_milliamp >= 1500 ||
+ pdata->charge_millivolt < 4000 ||
+ pdata->charge_millivolt > 4350)
+ return -EINVAL;
+
+ charger = devm_kzalloc(&pdev->dev, sizeof(*charger), GFP_KERNEL);
+ if (charger == NULL)
+ return -ENOMEM;
+
+ charger->master = pdev->dev.parent;
+
+ /* 10 seconds between monitor runs unless platform defines other
+ interval */
+ charger->interval = msecs_to_jiffies(
+ (pdata->batmon_interval ? : 10) * 1000);
+
+ charger->charge_milliamp = pdata->charge_milliamp;
+ charger->charge_millivolt = pdata->charge_millivolt;
+ charger->battery_info = pdata->battery_info;
+ charger->battery_low = pdata->battery_low;
+ charger->battery_critical = pdata->battery_critical;
+
+ da9030_battery_convert_thresholds(charger, pdata);
+
+ ret = da9030_battery_charger_init(charger);
+ if (ret)
+ goto err_charger_init;
+
+ INIT_DELAYED_WORK(&charger->work, da9030_charging_monitor);
+ schedule_delayed_work(&charger->work, charger->interval);
+
+ charger->nb.notifier_call = da9030_battery_event;
+ ret = da903x_register_notifier(charger->master, &charger->nb,
+ DA9030_EVENT_CHDET |
+ DA9030_EVENT_VBATMON |
+ DA9030_EVENT_CHIOVER |
+ DA9030_EVENT_TBAT);
+ if (ret)
+ goto err_notifier;
+
+ da9030_battery_setup_psy(charger);
+ psy_cfg.drv_data = charger;
+ charger->psy = power_supply_register(&pdev->dev, &charger->psy_desc,
+ &psy_cfg);
+ if (IS_ERR(charger->psy)) {
+ ret = PTR_ERR(charger->psy);
+ goto err_ps_register;
+ }
+
+ charger->debug_file = da9030_bat_create_debugfs(charger);
+ platform_set_drvdata(pdev, charger);
+ return 0;
+
+err_ps_register:
+ da903x_unregister_notifier(charger->master, &charger->nb,
+ DA9030_EVENT_CHDET | DA9030_EVENT_VBATMON |
+ DA9030_EVENT_CHIOVER | DA9030_EVENT_TBAT);
+err_notifier:
+ cancel_delayed_work(&charger->work);
+
+err_charger_init:
+ return ret;
+}
+
+static int da9030_battery_remove(struct platform_device *dev)
+{
+ struct da9030_charger *charger = platform_get_drvdata(dev);
+
+ da9030_bat_remove_debugfs(charger);
+
+ da903x_unregister_notifier(charger->master, &charger->nb,
+ DA9030_EVENT_CHDET | DA9030_EVENT_VBATMON |
+ DA9030_EVENT_CHIOVER | DA9030_EVENT_TBAT);
+ cancel_delayed_work_sync(&charger->work);
+ da9030_set_charge(charger, 0);
+ power_supply_unregister(charger->psy);
+
+ return 0;
+}
+
+static struct platform_driver da903x_battery_driver = {
+ .driver = {
+ .name = "da903x-battery",
+ },
+ .probe = da9030_battery_probe,
+ .remove = da9030_battery_remove,
+};
+
+module_platform_driver(da903x_battery_driver);
+
+MODULE_DESCRIPTION("DA9030 battery charger driver");
+MODULE_AUTHOR("Mike Rapoport, CompuLab");
+MODULE_LICENSE("GPL");
diff --git a/drivers/power/supply/da9052-battery.c b/drivers/power/supply/da9052-battery.c
new file mode 100644
index 000000000..d87bdecc9
--- /dev/null
+++ b/drivers/power/supply/da9052-battery.c
@@ -0,0 +1,665 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Batttery Driver for Dialog DA9052 PMICs
+ *
+ * Copyright(c) 2011 Dialog Semiconductor Ltd.
+ *
+ * Author: David Dajun Chen <dchen@diasemi.com>
+ */
+
+#include <linux/delay.h>
+#include <linux/freezer.h>
+#include <linux/fs.h>
+#include <linux/jiffies.h>
+#include <linux/module.h>
+#include <linux/timer.h>
+#include <linux/uaccess.h>
+#include <linux/platform_device.h>
+#include <linux/power_supply.h>
+
+#include <linux/mfd/da9052/da9052.h>
+#include <linux/mfd/da9052/pdata.h>
+#include <linux/mfd/da9052/reg.h>
+
+/* STATIC CONFIGURATION */
+#define DA9052_BAT_CUTOFF_VOLT 2800
+#define DA9052_BAT_TSH 62000
+#define DA9052_BAT_LOW_CAP 4
+#define DA9052_AVG_SZ 4
+#define DA9052_VC_TBL_SZ 68
+#define DA9052_VC_TBL_REF_SZ 3
+
+#define DA9052_ISET_USB_MASK 0x0F
+#define DA9052_CHG_USB_ILIM_MASK 0x40
+#define DA9052_CHG_LIM_COLS 16
+
+#define DA9052_MEAN(x, y) ((x + y) / 2)
+
+enum charger_type_enum {
+ DA9052_NOCHARGER = 1,
+ DA9052_CHARGER,
+};
+
+static const u16 da9052_chg_current_lim[2][DA9052_CHG_LIM_COLS] = {
+ {70, 80, 90, 100, 110, 120, 400, 450,
+ 500, 550, 600, 650, 700, 900, 1100, 1300},
+ {80, 90, 100, 110, 120, 400, 450, 500,
+ 550, 600, 800, 1000, 1200, 1400, 1600, 1800},
+};
+
+static const u16 vc_tbl_ref[3] = {10, 25, 40};
+/* Lookup table for voltage vs capacity */
+static u32 const vc_tbl[3][68][2] = {
+ /* For temperature 10 degree Celsius */
+ {
+ {4082, 100}, {4036, 98},
+ {4020, 96}, {4008, 95},
+ {3997, 93}, {3983, 91},
+ {3964, 90}, {3943, 88},
+ {3926, 87}, {3912, 85},
+ {3900, 84}, {3890, 82},
+ {3881, 80}, {3873, 79},
+ {3865, 77}, {3857, 76},
+ {3848, 74}, {3839, 73},
+ {3829, 71}, {3820, 70},
+ {3811, 68}, {3802, 67},
+ {3794, 65}, {3785, 64},
+ {3778, 62}, {3770, 61},
+ {3763, 59}, {3756, 58},
+ {3750, 56}, {3744, 55},
+ {3738, 53}, {3732, 52},
+ {3727, 50}, {3722, 49},
+ {3717, 47}, {3712, 46},
+ {3708, 44}, {3703, 43},
+ {3700, 41}, {3696, 40},
+ {3693, 38}, {3691, 37},
+ {3688, 35}, {3686, 34},
+ {3683, 32}, {3681, 31},
+ {3678, 29}, {3675, 28},
+ {3672, 26}, {3669, 25},
+ {3665, 23}, {3661, 22},
+ {3656, 21}, {3651, 19},
+ {3645, 18}, {3639, 16},
+ {3631, 15}, {3622, 13},
+ {3611, 12}, {3600, 10},
+ {3587, 9}, {3572, 7},
+ {3548, 6}, {3503, 5},
+ {3420, 3}, {3268, 2},
+ {2992, 1}, {2746, 0}
+ },
+ /* For temperature 25 degree Celsius */
+ {
+ {4102, 100}, {4065, 98},
+ {4048, 96}, {4034, 95},
+ {4021, 93}, {4011, 92},
+ {4001, 90}, {3986, 88},
+ {3968, 87}, {3952, 85},
+ {3938, 84}, {3926, 82},
+ {3916, 81}, {3908, 79},
+ {3900, 77}, {3892, 76},
+ {3883, 74}, {3874, 73},
+ {3864, 71}, {3855, 70},
+ {3846, 68}, {3836, 67},
+ {3827, 65}, {3819, 64},
+ {3810, 62}, {3801, 61},
+ {3793, 59}, {3786, 58},
+ {3778, 56}, {3772, 55},
+ {3765, 53}, {3759, 52},
+ {3754, 50}, {3748, 49},
+ {3743, 47}, {3738, 46},
+ {3733, 44}, {3728, 43},
+ {3724, 41}, {3720, 40},
+ {3716, 38}, {3712, 37},
+ {3709, 35}, {3706, 34},
+ {3703, 33}, {3701, 31},
+ {3698, 30}, {3696, 28},
+ {3693, 27}, {3690, 25},
+ {3687, 24}, {3683, 22},
+ {3680, 21}, {3675, 19},
+ {3671, 18}, {3666, 17},
+ {3660, 15}, {3654, 14},
+ {3647, 12}, {3639, 11},
+ {3630, 9}, {3621, 8},
+ {3613, 6}, {3606, 5},
+ {3597, 4}, {3582, 2},
+ {3546, 1}, {2747, 0}
+ },
+ /* For temperature 40 degree Celsius */
+ {
+ {4114, 100}, {4081, 98},
+ {4065, 96}, {4050, 95},
+ {4036, 93}, {4024, 92},
+ {4013, 90}, {4002, 88},
+ {3990, 87}, {3976, 85},
+ {3962, 84}, {3950, 82},
+ {3939, 81}, {3930, 79},
+ {3921, 77}, {3912, 76},
+ {3902, 74}, {3893, 73},
+ {3883, 71}, {3874, 70},
+ {3865, 68}, {3856, 67},
+ {3847, 65}, {3838, 64},
+ {3829, 62}, {3820, 61},
+ {3812, 59}, {3803, 58},
+ {3795, 56}, {3787, 55},
+ {3780, 53}, {3773, 52},
+ {3767, 50}, {3761, 49},
+ {3756, 47}, {3751, 46},
+ {3746, 44}, {3741, 43},
+ {3736, 41}, {3732, 40},
+ {3728, 38}, {3724, 37},
+ {3720, 35}, {3716, 34},
+ {3713, 33}, {3710, 31},
+ {3707, 30}, {3704, 28},
+ {3701, 27}, {3698, 25},
+ {3695, 24}, {3691, 22},
+ {3686, 21}, {3681, 19},
+ {3676, 18}, {3671, 17},
+ {3666, 15}, {3661, 14},
+ {3655, 12}, {3648, 11},
+ {3640, 9}, {3632, 8},
+ {3622, 6}, {3616, 5},
+ {3611, 4}, {3604, 2},
+ {3594, 1}, {2747, 0}
+ }
+};
+
+struct da9052_battery {
+ struct da9052 *da9052;
+ struct power_supply *psy;
+ struct notifier_block nb;
+ int charger_type;
+ int status;
+ int health;
+};
+
+static inline int volt_reg_to_mV(int value)
+{
+ return ((value * 1000) / 512) + 2500;
+}
+
+static inline int ichg_reg_to_mA(int value)
+{
+ return (value * 3900) / 1000;
+}
+
+static int da9052_read_chgend_current(struct da9052_battery *bat,
+ int *current_mA)
+{
+ int ret;
+
+ if (bat->status == POWER_SUPPLY_STATUS_DISCHARGING)
+ return -EINVAL;
+
+ ret = da9052_reg_read(bat->da9052, DA9052_ICHG_END_REG);
+ if (ret < 0)
+ return ret;
+
+ *current_mA = ichg_reg_to_mA(ret & DA9052_ICHGEND_ICHGEND);
+
+ return 0;
+}
+
+static int da9052_read_chg_current(struct da9052_battery *bat, int *current_mA)
+{
+ int ret;
+
+ if (bat->status == POWER_SUPPLY_STATUS_DISCHARGING)
+ return -EINVAL;
+
+ ret = da9052_reg_read(bat->da9052, DA9052_ICHG_AV_REG);
+ if (ret < 0)
+ return ret;
+
+ *current_mA = ichg_reg_to_mA(ret & DA9052_ICHGAV_ICHGAV);
+
+ return 0;
+}
+
+static int da9052_bat_check_status(struct da9052_battery *bat, int *status)
+{
+ u8 v[2] = {0, 0};
+ u8 bat_status;
+ u8 chg_end;
+ int ret;
+ int chg_current;
+ int chg_end_current;
+ bool dcinsel;
+ bool dcindet;
+ bool vbussel;
+ bool vbusdet;
+ bool dc;
+ bool vbus;
+
+ ret = da9052_group_read(bat->da9052, DA9052_STATUS_A_REG, 2, v);
+ if (ret < 0)
+ return ret;
+
+ bat_status = v[0];
+ chg_end = v[1];
+
+ dcinsel = bat_status & DA9052_STATUSA_DCINSEL;
+ dcindet = bat_status & DA9052_STATUSA_DCINDET;
+ vbussel = bat_status & DA9052_STATUSA_VBUSSEL;
+ vbusdet = bat_status & DA9052_STATUSA_VBUSDET;
+ dc = dcinsel && dcindet;
+ vbus = vbussel && vbusdet;
+
+ /* Preference to WALL(DCIN) charger unit */
+ if (dc || vbus) {
+ bat->charger_type = DA9052_CHARGER;
+
+ /* If charging end flag is set and Charging current is greater
+ * than charging end limit then battery is charging
+ */
+ if ((chg_end & DA9052_STATUSB_CHGEND) != 0) {
+ ret = da9052_read_chg_current(bat, &chg_current);
+ if (ret < 0)
+ return ret;
+ ret = da9052_read_chgend_current(bat, &chg_end_current);
+ if (ret < 0)
+ return ret;
+
+ if (chg_current >= chg_end_current)
+ bat->status = POWER_SUPPLY_STATUS_CHARGING;
+ else
+ bat->status = POWER_SUPPLY_STATUS_NOT_CHARGING;
+ } else {
+ /* If Charging end flag is cleared then battery is
+ * charging
+ */
+ bat->status = POWER_SUPPLY_STATUS_CHARGING;
+ }
+ } else if (dcindet || vbusdet) {
+ bat->charger_type = DA9052_CHARGER;
+ bat->status = POWER_SUPPLY_STATUS_NOT_CHARGING;
+ } else {
+ bat->charger_type = DA9052_NOCHARGER;
+ bat->status = POWER_SUPPLY_STATUS_DISCHARGING;
+ }
+
+ if (status != NULL)
+ *status = bat->status;
+ return 0;
+}
+
+static int da9052_bat_read_volt(struct da9052_battery *bat, int *volt_mV)
+{
+ int volt;
+
+ volt = da9052_adc_manual_read(bat->da9052, DA9052_ADC_MAN_MUXSEL_VBAT);
+ if (volt < 0)
+ return volt;
+
+ *volt_mV = volt_reg_to_mV(volt);
+
+ return 0;
+}
+
+static int da9052_bat_check_presence(struct da9052_battery *bat, int *illegal)
+{
+ int bat_temp;
+
+ bat_temp = da9052_adc_read_temp(bat->da9052);
+ if (bat_temp < 0)
+ return bat_temp;
+
+ if (bat_temp > DA9052_BAT_TSH)
+ *illegal = 1;
+ else
+ *illegal = 0;
+
+ return 0;
+}
+
+static int da9052_bat_interpolate(int vbat_lower, int vbat_upper,
+ int level_lower, int level_upper,
+ int bat_voltage)
+{
+ int tmp;
+
+ tmp = ((level_upper - level_lower) * 1000) / (vbat_upper - vbat_lower);
+ tmp = level_lower + (((bat_voltage - vbat_lower) * tmp) / 1000);
+
+ return tmp;
+}
+
+static unsigned char da9052_determine_vc_tbl_index(unsigned char adc_temp)
+{
+ int i;
+
+ if (adc_temp <= vc_tbl_ref[0])
+ return 0;
+
+ if (adc_temp > vc_tbl_ref[DA9052_VC_TBL_REF_SZ - 1])
+ return DA9052_VC_TBL_REF_SZ - 1;
+
+ for (i = 0; i < DA9052_VC_TBL_REF_SZ - 1; i++) {
+ if ((adc_temp > vc_tbl_ref[i]) &&
+ (adc_temp <= DA9052_MEAN(vc_tbl_ref[i], vc_tbl_ref[i + 1])))
+ return i;
+ if ((adc_temp > DA9052_MEAN(vc_tbl_ref[i], vc_tbl_ref[i + 1]))
+ && (adc_temp <= vc_tbl_ref[i]))
+ return i + 1;
+ }
+ /*
+ * For some reason authors of the driver didn't presume that we can
+ * end up here. It might be OK, but might be not, no one knows for
+ * sure. Go check your battery, is it on fire?
+ */
+ WARN_ON(1);
+ return 0;
+}
+
+static int da9052_bat_read_capacity(struct da9052_battery *bat, int *capacity)
+{
+ int adc_temp;
+ int bat_voltage;
+ int vbat_lower;
+ int vbat_upper;
+ int level_upper;
+ int level_lower;
+ int ret;
+ int flag;
+ int i = 0;
+ int j;
+
+ ret = da9052_bat_read_volt(bat, &bat_voltage);
+ if (ret < 0)
+ return ret;
+
+ adc_temp = da9052_adc_read_temp(bat->da9052);
+ if (adc_temp < 0)
+ return adc_temp;
+
+ i = da9052_determine_vc_tbl_index(adc_temp);
+
+ if (bat_voltage >= vc_tbl[i][0][0]) {
+ *capacity = 100;
+ return 0;
+ }
+ if (bat_voltage <= vc_tbl[i][DA9052_VC_TBL_SZ - 1][0]) {
+ *capacity = 0;
+ return 0;
+ }
+ flag = 0;
+
+ for (j = 0; j < (DA9052_VC_TBL_SZ-1); j++) {
+ if ((bat_voltage <= vc_tbl[i][j][0]) &&
+ (bat_voltage >= vc_tbl[i][j + 1][0])) {
+ vbat_upper = vc_tbl[i][j][0];
+ vbat_lower = vc_tbl[i][j + 1][0];
+ level_upper = vc_tbl[i][j][1];
+ level_lower = vc_tbl[i][j + 1][1];
+ flag = 1;
+ break;
+ }
+ }
+ if (!flag)
+ return -EIO;
+
+ *capacity = da9052_bat_interpolate(vbat_lower, vbat_upper, level_lower,
+ level_upper, bat_voltage);
+
+ return 0;
+}
+
+static int da9052_bat_check_health(struct da9052_battery *bat, int *health)
+{
+ int ret;
+ int bat_illegal;
+ int capacity;
+
+ ret = da9052_bat_check_presence(bat, &bat_illegal);
+ if (ret < 0)
+ return ret;
+
+ if (bat_illegal) {
+ bat->health = POWER_SUPPLY_HEALTH_UNKNOWN;
+ return 0;
+ }
+
+ if (bat->health != POWER_SUPPLY_HEALTH_OVERHEAT) {
+ ret = da9052_bat_read_capacity(bat, &capacity);
+ if (ret < 0)
+ return ret;
+ if (capacity < DA9052_BAT_LOW_CAP)
+ bat->health = POWER_SUPPLY_HEALTH_DEAD;
+ else
+ bat->health = POWER_SUPPLY_HEALTH_GOOD;
+ }
+
+ *health = bat->health;
+
+ return 0;
+}
+
+static irqreturn_t da9052_bat_irq(int irq, void *data)
+{
+ struct da9052_battery *bat = data;
+ int virq;
+
+ virq = regmap_irq_get_virq(bat->da9052->irq_data, irq);
+ irq -= virq;
+
+ if (irq == DA9052_IRQ_CHGEND)
+ bat->status = POWER_SUPPLY_STATUS_FULL;
+ else
+ da9052_bat_check_status(bat, NULL);
+
+ if (irq == DA9052_IRQ_CHGEND || irq == DA9052_IRQ_DCIN ||
+ irq == DA9052_IRQ_VBUS || irq == DA9052_IRQ_TBAT) {
+ power_supply_changed(bat->psy);
+ }
+
+ return IRQ_HANDLED;
+}
+
+static int da9052_USB_current_notifier(struct notifier_block *nb,
+ unsigned long events, void *data)
+{
+ u8 row;
+ u8 col;
+ int *current_mA = data;
+ int ret;
+ struct da9052_battery *bat = container_of(nb, struct da9052_battery,
+ nb);
+
+ if (bat->status == POWER_SUPPLY_STATUS_DISCHARGING)
+ return -EPERM;
+
+ ret = da9052_reg_read(bat->da9052, DA9052_CHGBUCK_REG);
+ if (ret & DA9052_CHG_USB_ILIM_MASK)
+ return -EPERM;
+
+ if (bat->da9052->chip_id == DA9052)
+ row = 0;
+ else
+ row = 1;
+
+ if (*current_mA < da9052_chg_current_lim[row][0] ||
+ *current_mA > da9052_chg_current_lim[row][DA9052_CHG_LIM_COLS - 1])
+ return -EINVAL;
+
+ for (col = 0; col <= DA9052_CHG_LIM_COLS - 1 ; col++) {
+ if (*current_mA <= da9052_chg_current_lim[row][col])
+ break;
+ }
+
+ return da9052_reg_update(bat->da9052, DA9052_ISET_REG,
+ DA9052_ISET_USB_MASK, col);
+}
+
+static int da9052_bat_get_property(struct power_supply *psy,
+ enum power_supply_property psp,
+ union power_supply_propval *val)
+{
+ int ret;
+ int illegal;
+ struct da9052_battery *bat = power_supply_get_drvdata(psy);
+
+ ret = da9052_bat_check_presence(bat, &illegal);
+ if (ret < 0)
+ return ret;
+
+ if (illegal && psp != POWER_SUPPLY_PROP_PRESENT)
+ return -ENODEV;
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_STATUS:
+ ret = da9052_bat_check_status(bat, &val->intval);
+ break;
+ case POWER_SUPPLY_PROP_ONLINE:
+ val->intval =
+ (bat->charger_type == DA9052_NOCHARGER) ? 0 : 1;
+ break;
+ case POWER_SUPPLY_PROP_PRESENT:
+ ret = da9052_bat_check_presence(bat, &val->intval);
+ break;
+ case POWER_SUPPLY_PROP_HEALTH:
+ ret = da9052_bat_check_health(bat, &val->intval);
+ break;
+ case POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN:
+ val->intval = DA9052_BAT_CUTOFF_VOLT * 1000;
+ break;
+ case POWER_SUPPLY_PROP_VOLTAGE_AVG:
+ ret = da9052_bat_read_volt(bat, &val->intval);
+ break;
+ case POWER_SUPPLY_PROP_CURRENT_AVG:
+ ret = da9052_read_chg_current(bat, &val->intval);
+ break;
+ case POWER_SUPPLY_PROP_CAPACITY:
+ ret = da9052_bat_read_capacity(bat, &val->intval);
+ break;
+ case POWER_SUPPLY_PROP_TEMP:
+ val->intval = da9052_adc_read_temp(bat->da9052);
+ ret = val->intval;
+ break;
+ case POWER_SUPPLY_PROP_TECHNOLOGY:
+ val->intval = POWER_SUPPLY_TECHNOLOGY_LION;
+ break;
+ default:
+ return -EINVAL;
+ }
+ return ret;
+}
+
+static enum power_supply_property da9052_bat_props[] = {
+ POWER_SUPPLY_PROP_STATUS,
+ POWER_SUPPLY_PROP_ONLINE,
+ POWER_SUPPLY_PROP_PRESENT,
+ POWER_SUPPLY_PROP_HEALTH,
+ POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN,
+ POWER_SUPPLY_PROP_VOLTAGE_AVG,
+ POWER_SUPPLY_PROP_CURRENT_AVG,
+ POWER_SUPPLY_PROP_CAPACITY,
+ POWER_SUPPLY_PROP_TEMP,
+ POWER_SUPPLY_PROP_TECHNOLOGY,
+};
+
+static struct power_supply_desc psy_desc = {
+ .name = "da9052-bat",
+ .type = POWER_SUPPLY_TYPE_BATTERY,
+ .properties = da9052_bat_props,
+ .num_properties = ARRAY_SIZE(da9052_bat_props),
+ .get_property = da9052_bat_get_property,
+};
+
+static char *da9052_bat_irqs[] = {
+ "BATT TEMP",
+ "DCIN DET",
+ "DCIN REM",
+ "VBUS DET",
+ "VBUS REM",
+ "CHG END",
+};
+
+static int da9052_bat_irq_bits[] = {
+ DA9052_IRQ_TBAT,
+ DA9052_IRQ_DCIN,
+ DA9052_IRQ_DCINREM,
+ DA9052_IRQ_VBUS,
+ DA9052_IRQ_VBUSREM,
+ DA9052_IRQ_CHGEND,
+};
+
+static s32 da9052_bat_probe(struct platform_device *pdev)
+{
+ struct da9052_pdata *pdata;
+ struct da9052_battery *bat;
+ struct power_supply_config psy_cfg = {};
+ int ret;
+ int i;
+
+ bat = devm_kzalloc(&pdev->dev, sizeof(struct da9052_battery),
+ GFP_KERNEL);
+ if (!bat)
+ return -ENOMEM;
+
+ psy_cfg.drv_data = bat;
+
+ bat->da9052 = dev_get_drvdata(pdev->dev.parent);
+ bat->charger_type = DA9052_NOCHARGER;
+ bat->status = POWER_SUPPLY_STATUS_UNKNOWN;
+ bat->health = POWER_SUPPLY_HEALTH_UNKNOWN;
+ bat->nb.notifier_call = da9052_USB_current_notifier;
+
+ pdata = bat->da9052->dev->platform_data;
+ if (pdata != NULL && pdata->use_for_apm)
+ psy_desc.use_for_apm = pdata->use_for_apm;
+ else
+ psy_desc.use_for_apm = 1;
+
+ for (i = 0; i < ARRAY_SIZE(da9052_bat_irqs); i++) {
+ ret = da9052_request_irq(bat->da9052,
+ da9052_bat_irq_bits[i], da9052_bat_irqs[i],
+ da9052_bat_irq, bat);
+
+ if (ret != 0) {
+ dev_err(bat->da9052->dev,
+ "DA9052 failed to request %s IRQ: %d\n",
+ da9052_bat_irqs[i], ret);
+ goto err;
+ }
+ }
+
+ bat->psy = power_supply_register(&pdev->dev, &psy_desc, &psy_cfg);
+ if (IS_ERR(bat->psy)) {
+ ret = PTR_ERR(bat->psy);
+ goto err;
+ }
+
+ platform_set_drvdata(pdev, bat);
+ return 0;
+
+err:
+ while (--i >= 0)
+ da9052_free_irq(bat->da9052, da9052_bat_irq_bits[i], bat);
+
+ return ret;
+}
+static int da9052_bat_remove(struct platform_device *pdev)
+{
+ int i;
+ struct da9052_battery *bat = platform_get_drvdata(pdev);
+
+ for (i = 0; i < ARRAY_SIZE(da9052_bat_irqs); i++)
+ da9052_free_irq(bat->da9052, da9052_bat_irq_bits[i], bat);
+
+ power_supply_unregister(bat->psy);
+
+ return 0;
+}
+
+static struct platform_driver da9052_bat_driver = {
+ .probe = da9052_bat_probe,
+ .remove = da9052_bat_remove,
+ .driver = {
+ .name = "da9052-bat",
+ },
+};
+module_platform_driver(da9052_bat_driver);
+
+MODULE_DESCRIPTION("DA9052 BAT Device Driver");
+MODULE_AUTHOR("David Dajun Chen <dchen@diasemi.com>");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:da9052-bat");
diff --git a/drivers/power/supply/da9150-charger.c b/drivers/power/supply/da9150-charger.c
new file mode 100644
index 000000000..6b987da58
--- /dev/null
+++ b/drivers/power/supply/da9150-charger.c
@@ -0,0 +1,691 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * DA9150 Charger Driver
+ *
+ * Copyright (c) 2014 Dialog Semiconductor
+ *
+ * Author: Adam Thomson <Adam.Thomson.Opensource@diasemi.com>
+ */
+
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/interrupt.h>
+#include <linux/power_supply.h>
+#include <linux/notifier.h>
+#include <linux/usb/phy.h>
+#include <linux/iio/consumer.h>
+#include <linux/mfd/da9150/core.h>
+#include <linux/mfd/da9150/registers.h>
+
+/* Private data */
+struct da9150_charger {
+ struct da9150 *da9150;
+ struct device *dev;
+
+ struct power_supply *usb;
+ struct power_supply *battery;
+ struct power_supply *supply_online;
+
+ struct usb_phy *usb_phy;
+ struct notifier_block otg_nb;
+ struct work_struct otg_work;
+ unsigned long usb_event;
+
+ struct iio_channel *ibus_chan;
+ struct iio_channel *vbus_chan;
+ struct iio_channel *tjunc_chan;
+ struct iio_channel *vbat_chan;
+};
+
+static inline int da9150_charger_supply_online(struct da9150_charger *charger,
+ struct power_supply *psy,
+ union power_supply_propval *val)
+{
+ val->intval = (psy == charger->supply_online) ? 1 : 0;
+
+ return 0;
+}
+
+/* Charger Properties */
+static int da9150_charger_vbus_voltage_now(struct da9150_charger *charger,
+ union power_supply_propval *val)
+{
+ int v_val, ret;
+
+ /* Read processed value - mV units */
+ ret = iio_read_channel_processed(charger->vbus_chan, &v_val);
+ if (ret < 0)
+ return ret;
+
+ /* Convert voltage to expected uV units */
+ val->intval = v_val * 1000;
+
+ return 0;
+}
+
+static int da9150_charger_ibus_current_avg(struct da9150_charger *charger,
+ union power_supply_propval *val)
+{
+ int i_val, ret;
+
+ /* Read processed value - mA units */
+ ret = iio_read_channel_processed(charger->ibus_chan, &i_val);
+ if (ret < 0)
+ return ret;
+
+ /* Convert current to expected uA units */
+ val->intval = i_val * 1000;
+
+ return 0;
+}
+
+static int da9150_charger_tjunc_temp(struct da9150_charger *charger,
+ union power_supply_propval *val)
+{
+ int t_val, ret;
+
+ /* Read processed value - 0.001 degrees C units */
+ ret = iio_read_channel_processed(charger->tjunc_chan, &t_val);
+ if (ret < 0)
+ return ret;
+
+ /* Convert temp to expect 0.1 degrees C units */
+ val->intval = t_val / 100;
+
+ return 0;
+}
+
+static enum power_supply_property da9150_charger_props[] = {
+ POWER_SUPPLY_PROP_ONLINE,
+ POWER_SUPPLY_PROP_VOLTAGE_NOW,
+ POWER_SUPPLY_PROP_CURRENT_AVG,
+ POWER_SUPPLY_PROP_TEMP,
+};
+
+static int da9150_charger_get_prop(struct power_supply *psy,
+ enum power_supply_property psp,
+ union power_supply_propval *val)
+{
+ struct da9150_charger *charger = dev_get_drvdata(psy->dev.parent);
+ int ret;
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_ONLINE:
+ ret = da9150_charger_supply_online(charger, psy, val);
+ break;
+ case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+ ret = da9150_charger_vbus_voltage_now(charger, val);
+ break;
+ case POWER_SUPPLY_PROP_CURRENT_AVG:
+ ret = da9150_charger_ibus_current_avg(charger, val);
+ break;
+ case POWER_SUPPLY_PROP_TEMP:
+ ret = da9150_charger_tjunc_temp(charger, val);
+ break;
+ default:
+ ret = -EINVAL;
+ break;
+ }
+
+ return ret;
+}
+
+/* Battery Properties */
+static int da9150_charger_battery_status(struct da9150_charger *charger,
+ union power_supply_propval *val)
+{
+ u8 reg;
+
+ /* Check to see if battery is discharging */
+ reg = da9150_reg_read(charger->da9150, DA9150_STATUS_H);
+
+ if (((reg & DA9150_VBUS_STAT_MASK) == DA9150_VBUS_STAT_OFF) ||
+ ((reg & DA9150_VBUS_STAT_MASK) == DA9150_VBUS_STAT_WAIT)) {
+ val->intval = POWER_SUPPLY_STATUS_DISCHARGING;
+
+ return 0;
+ }
+
+ reg = da9150_reg_read(charger->da9150, DA9150_STATUS_J);
+
+ /* Now check for other states */
+ switch (reg & DA9150_CHG_STAT_MASK) {
+ case DA9150_CHG_STAT_ACT:
+ case DA9150_CHG_STAT_PRE:
+ case DA9150_CHG_STAT_CC:
+ case DA9150_CHG_STAT_CV:
+ val->intval = POWER_SUPPLY_STATUS_CHARGING;
+ break;
+ case DA9150_CHG_STAT_OFF:
+ case DA9150_CHG_STAT_SUSP:
+ case DA9150_CHG_STAT_TEMP:
+ case DA9150_CHG_STAT_TIME:
+ case DA9150_CHG_STAT_BAT:
+ val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING;
+ break;
+ case DA9150_CHG_STAT_FULL:
+ val->intval = POWER_SUPPLY_STATUS_FULL;
+ break;
+ default:
+ val->intval = POWER_SUPPLY_STATUS_UNKNOWN;
+ break;
+ }
+
+ return 0;
+}
+
+static int da9150_charger_battery_health(struct da9150_charger *charger,
+ union power_supply_propval *val)
+{
+ u8 reg;
+
+ reg = da9150_reg_read(charger->da9150, DA9150_STATUS_J);
+
+ /* Check if temperature limit reached */
+ switch (reg & DA9150_CHG_TEMP_MASK) {
+ case DA9150_CHG_TEMP_UNDER:
+ val->intval = POWER_SUPPLY_HEALTH_COLD;
+ return 0;
+ case DA9150_CHG_TEMP_OVER:
+ val->intval = POWER_SUPPLY_HEALTH_OVERHEAT;
+ return 0;
+ default:
+ break;
+ }
+
+ /* Check for other health states */
+ switch (reg & DA9150_CHG_STAT_MASK) {
+ case DA9150_CHG_STAT_ACT:
+ case DA9150_CHG_STAT_PRE:
+ val->intval = POWER_SUPPLY_HEALTH_DEAD;
+ break;
+ case DA9150_CHG_STAT_TIME:
+ val->intval = POWER_SUPPLY_HEALTH_UNSPEC_FAILURE;
+ break;
+ default:
+ val->intval = POWER_SUPPLY_HEALTH_GOOD;
+ break;
+ }
+
+ return 0;
+}
+
+static int da9150_charger_battery_present(struct da9150_charger *charger,
+ union power_supply_propval *val)
+{
+ u8 reg;
+
+ /* Check if battery present or removed */
+ reg = da9150_reg_read(charger->da9150, DA9150_STATUS_J);
+ if ((reg & DA9150_CHG_STAT_MASK) == DA9150_CHG_STAT_BAT)
+ val->intval = 0;
+ else
+ val->intval = 1;
+
+ return 0;
+}
+
+static int da9150_charger_battery_charge_type(struct da9150_charger *charger,
+ union power_supply_propval *val)
+{
+ u8 reg;
+
+ reg = da9150_reg_read(charger->da9150, DA9150_STATUS_J);
+
+ switch (reg & DA9150_CHG_STAT_MASK) {
+ case DA9150_CHG_STAT_CC:
+ val->intval = POWER_SUPPLY_CHARGE_TYPE_FAST;
+ break;
+ case DA9150_CHG_STAT_ACT:
+ case DA9150_CHG_STAT_PRE:
+ case DA9150_CHG_STAT_CV:
+ val->intval = POWER_SUPPLY_CHARGE_TYPE_TRICKLE;
+ break;
+ default:
+ val->intval = POWER_SUPPLY_CHARGE_TYPE_NONE;
+ break;
+ }
+
+ return 0;
+}
+
+static int da9150_charger_battery_voltage_min(struct da9150_charger *charger,
+ union power_supply_propval *val)
+{
+ u8 reg;
+
+ reg = da9150_reg_read(charger->da9150, DA9150_PPR_CHGCTRL_C);
+
+ /* Value starts at 2500 mV, 50 mV increments, presented in uV */
+ val->intval = ((reg & DA9150_CHG_VFAULT_MASK) * 50000) + 2500000;
+
+ return 0;
+}
+
+static int da9150_charger_battery_voltage_now(struct da9150_charger *charger,
+ union power_supply_propval *val)
+{
+ int v_val, ret;
+
+ /* Read processed value - mV units */
+ ret = iio_read_channel_processed(charger->vbat_chan, &v_val);
+ if (ret < 0)
+ return ret;
+
+ val->intval = v_val * 1000;
+
+ return 0;
+}
+
+static int da9150_charger_battery_current_max(struct da9150_charger *charger,
+ union power_supply_propval *val)
+{
+ int reg;
+
+ reg = da9150_reg_read(charger->da9150, DA9150_PPR_CHGCTRL_D);
+
+ /* 25mA increments */
+ val->intval = reg * 25000;
+
+ return 0;
+}
+
+static int da9150_charger_battery_voltage_max(struct da9150_charger *charger,
+ union power_supply_propval *val)
+{
+ u8 reg;
+
+ reg = da9150_reg_read(charger->da9150, DA9150_PPR_CHGCTRL_B);
+
+ /* Value starts at 3650 mV, 25 mV increments, presented in uV */
+ val->intval = ((reg & DA9150_CHG_VBAT_MASK) * 25000) + 3650000;
+ return 0;
+}
+
+static enum power_supply_property da9150_charger_bat_props[] = {
+ POWER_SUPPLY_PROP_STATUS,
+ POWER_SUPPLY_PROP_ONLINE,
+ POWER_SUPPLY_PROP_HEALTH,
+ POWER_SUPPLY_PROP_PRESENT,
+ POWER_SUPPLY_PROP_CHARGE_TYPE,
+ POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN,
+ POWER_SUPPLY_PROP_VOLTAGE_NOW,
+ POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX,
+ POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX,
+};
+
+static int da9150_charger_battery_get_prop(struct power_supply *psy,
+ enum power_supply_property psp,
+ union power_supply_propval *val)
+{
+ struct da9150_charger *charger = dev_get_drvdata(psy->dev.parent);
+ int ret;
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_STATUS:
+ ret = da9150_charger_battery_status(charger, val);
+ break;
+ case POWER_SUPPLY_PROP_ONLINE:
+ ret = da9150_charger_supply_online(charger, psy, val);
+ break;
+ case POWER_SUPPLY_PROP_HEALTH:
+ ret = da9150_charger_battery_health(charger, val);
+ break;
+ case POWER_SUPPLY_PROP_PRESENT:
+ ret = da9150_charger_battery_present(charger, val);
+ break;
+ case POWER_SUPPLY_PROP_CHARGE_TYPE:
+ ret = da9150_charger_battery_charge_type(charger, val);
+ break;
+ case POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN:
+ ret = da9150_charger_battery_voltage_min(charger, val);
+ break;
+ case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+ ret = da9150_charger_battery_voltage_now(charger, val);
+ break;
+ case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX:
+ ret = da9150_charger_battery_current_max(charger, val);
+ break;
+ case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX:
+ ret = da9150_charger_battery_voltage_max(charger, val);
+ break;
+ default:
+ ret = -EINVAL;
+ break;
+ }
+
+ return ret;
+}
+
+static irqreturn_t da9150_charger_chg_irq(int irq, void *data)
+{
+ struct da9150_charger *charger = data;
+
+ power_supply_changed(charger->battery);
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t da9150_charger_tjunc_irq(int irq, void *data)
+{
+ struct da9150_charger *charger = data;
+
+ /* Nothing we can really do except report this. */
+ dev_crit(charger->dev, "TJunc over temperature!!!\n");
+ power_supply_changed(charger->usb);
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t da9150_charger_vfault_irq(int irq, void *data)
+{
+ struct da9150_charger *charger = data;
+
+ /* Nothing we can really do except report this. */
+ dev_crit(charger->dev, "VSYS under voltage!!!\n");
+ power_supply_changed(charger->usb);
+ power_supply_changed(charger->battery);
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t da9150_charger_vbus_irq(int irq, void *data)
+{
+ struct da9150_charger *charger = data;
+ u8 reg;
+
+ reg = da9150_reg_read(charger->da9150, DA9150_STATUS_H);
+
+ /* Charger plugged in or battery only */
+ switch (reg & DA9150_VBUS_STAT_MASK) {
+ case DA9150_VBUS_STAT_OFF:
+ case DA9150_VBUS_STAT_WAIT:
+ charger->supply_online = charger->battery;
+ break;
+ case DA9150_VBUS_STAT_CHG:
+ charger->supply_online = charger->usb;
+ break;
+ default:
+ dev_warn(charger->dev, "Unknown VBUS state - reg = 0x%x\n",
+ reg);
+ charger->supply_online = NULL;
+ break;
+ }
+
+ power_supply_changed(charger->usb);
+ power_supply_changed(charger->battery);
+
+ return IRQ_HANDLED;
+}
+
+static void da9150_charger_otg_work(struct work_struct *data)
+{
+ struct da9150_charger *charger =
+ container_of(data, struct da9150_charger, otg_work);
+
+ switch (charger->usb_event) {
+ case USB_EVENT_ID:
+ /* Enable OTG Boost */
+ da9150_set_bits(charger->da9150, DA9150_PPR_BKCTRL_A,
+ DA9150_VBUS_MODE_MASK, DA9150_VBUS_MODE_OTG);
+ break;
+ case USB_EVENT_NONE:
+ /* Revert to charge mode */
+ power_supply_changed(charger->usb);
+ power_supply_changed(charger->battery);
+ da9150_set_bits(charger->da9150, DA9150_PPR_BKCTRL_A,
+ DA9150_VBUS_MODE_MASK, DA9150_VBUS_MODE_CHG);
+ break;
+ }
+}
+
+static int da9150_charger_otg_ncb(struct notifier_block *nb, unsigned long val,
+ void *priv)
+{
+ struct da9150_charger *charger =
+ container_of(nb, struct da9150_charger, otg_nb);
+
+ dev_dbg(charger->dev, "DA9150 OTG notify %lu\n", val);
+
+ charger->usb_event = val;
+ schedule_work(&charger->otg_work);
+
+ return NOTIFY_OK;
+}
+
+static int da9150_charger_register_irq(struct platform_device *pdev,
+ irq_handler_t handler,
+ const char *irq_name)
+{
+ struct device *dev = &pdev->dev;
+ struct da9150_charger *charger = platform_get_drvdata(pdev);
+ int irq, ret;
+
+ irq = platform_get_irq_byname(pdev, irq_name);
+ if (irq < 0) {
+ dev_err(dev, "Failed to get IRQ CHG_STATUS: %d\n", irq);
+ return irq;
+ }
+
+ ret = request_threaded_irq(irq, NULL, handler, IRQF_ONESHOT, irq_name,
+ charger);
+ if (ret)
+ dev_err(dev, "Failed to request IRQ %d: %d\n", irq, ret);
+
+ return ret;
+}
+
+static void da9150_charger_unregister_irq(struct platform_device *pdev,
+ const char *irq_name)
+{
+ struct device *dev = &pdev->dev;
+ struct da9150_charger *charger = platform_get_drvdata(pdev);
+ int irq;
+
+ irq = platform_get_irq_byname(pdev, irq_name);
+ if (irq < 0) {
+ dev_err(dev, "Failed to get IRQ CHG_STATUS: %d\n", irq);
+ return;
+ }
+
+ free_irq(irq, charger);
+}
+
+static const struct power_supply_desc usb_desc = {
+ .name = "da9150-usb",
+ .type = POWER_SUPPLY_TYPE_USB,
+ .properties = da9150_charger_props,
+ .num_properties = ARRAY_SIZE(da9150_charger_props),
+ .get_property = da9150_charger_get_prop,
+};
+
+static const struct power_supply_desc battery_desc = {
+ .name = "da9150-battery",
+ .type = POWER_SUPPLY_TYPE_BATTERY,
+ .properties = da9150_charger_bat_props,
+ .num_properties = ARRAY_SIZE(da9150_charger_bat_props),
+ .get_property = da9150_charger_battery_get_prop,
+};
+
+static int da9150_charger_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct da9150 *da9150 = dev_get_drvdata(dev->parent);
+ struct da9150_charger *charger;
+ u8 reg;
+ int ret;
+
+ charger = devm_kzalloc(dev, sizeof(struct da9150_charger), GFP_KERNEL);
+ if (!charger)
+ return -ENOMEM;
+
+ platform_set_drvdata(pdev, charger);
+ charger->da9150 = da9150;
+ charger->dev = dev;
+
+ /* Acquire ADC channels */
+ charger->ibus_chan = iio_channel_get(dev, "CHAN_IBUS");
+ if (IS_ERR(charger->ibus_chan)) {
+ ret = PTR_ERR(charger->ibus_chan);
+ goto ibus_chan_fail;
+ }
+
+ charger->vbus_chan = iio_channel_get(dev, "CHAN_VBUS");
+ if (IS_ERR(charger->vbus_chan)) {
+ ret = PTR_ERR(charger->vbus_chan);
+ goto vbus_chan_fail;
+ }
+
+ charger->tjunc_chan = iio_channel_get(dev, "CHAN_TJUNC");
+ if (IS_ERR(charger->tjunc_chan)) {
+ ret = PTR_ERR(charger->tjunc_chan);
+ goto tjunc_chan_fail;
+ }
+
+ charger->vbat_chan = iio_channel_get(dev, "CHAN_VBAT");
+ if (IS_ERR(charger->vbat_chan)) {
+ ret = PTR_ERR(charger->vbat_chan);
+ goto vbat_chan_fail;
+ }
+
+ /* Register power supplies */
+ charger->usb = power_supply_register(dev, &usb_desc, NULL);
+ if (IS_ERR(charger->usb)) {
+ ret = PTR_ERR(charger->usb);
+ goto usb_fail;
+ }
+
+ charger->battery = power_supply_register(dev, &battery_desc, NULL);
+ if (IS_ERR(charger->battery)) {
+ ret = PTR_ERR(charger->battery);
+ goto battery_fail;
+ }
+
+ /* Get initial online supply */
+ reg = da9150_reg_read(da9150, DA9150_STATUS_H);
+
+ switch (reg & DA9150_VBUS_STAT_MASK) {
+ case DA9150_VBUS_STAT_OFF:
+ case DA9150_VBUS_STAT_WAIT:
+ charger->supply_online = charger->battery;
+ break;
+ case DA9150_VBUS_STAT_CHG:
+ charger->supply_online = charger->usb;
+ break;
+ default:
+ dev_warn(dev, "Unknown VBUS state - reg = 0x%x\n", reg);
+ charger->supply_online = NULL;
+ break;
+ }
+
+ /* Setup OTG reporting & configuration */
+ charger->usb_phy = devm_usb_get_phy(dev, USB_PHY_TYPE_USB2);
+ if (!IS_ERR_OR_NULL(charger->usb_phy)) {
+ INIT_WORK(&charger->otg_work, da9150_charger_otg_work);
+ charger->otg_nb.notifier_call = da9150_charger_otg_ncb;
+ usb_register_notifier(charger->usb_phy, &charger->otg_nb);
+ }
+
+ /* Register IRQs */
+ ret = da9150_charger_register_irq(pdev, da9150_charger_chg_irq,
+ "CHG_STATUS");
+ if (ret < 0)
+ goto chg_irq_fail;
+
+ ret = da9150_charger_register_irq(pdev, da9150_charger_tjunc_irq,
+ "CHG_TJUNC");
+ if (ret < 0)
+ goto tjunc_irq_fail;
+
+ ret = da9150_charger_register_irq(pdev, da9150_charger_vfault_irq,
+ "CHG_VFAULT");
+ if (ret < 0)
+ goto vfault_irq_fail;
+
+ ret = da9150_charger_register_irq(pdev, da9150_charger_vbus_irq,
+ "CHG_VBUS");
+ if (ret < 0)
+ goto vbus_irq_fail;
+
+ return 0;
+
+
+vbus_irq_fail:
+ da9150_charger_unregister_irq(pdev, "CHG_VFAULT");
+vfault_irq_fail:
+ da9150_charger_unregister_irq(pdev, "CHG_TJUNC");
+tjunc_irq_fail:
+ da9150_charger_unregister_irq(pdev, "CHG_STATUS");
+chg_irq_fail:
+ if (!IS_ERR_OR_NULL(charger->usb_phy))
+ usb_unregister_notifier(charger->usb_phy, &charger->otg_nb);
+battery_fail:
+ power_supply_unregister(charger->usb);
+
+usb_fail:
+ iio_channel_release(charger->vbat_chan);
+
+vbat_chan_fail:
+ iio_channel_release(charger->tjunc_chan);
+
+tjunc_chan_fail:
+ iio_channel_release(charger->vbus_chan);
+
+vbus_chan_fail:
+ iio_channel_release(charger->ibus_chan);
+
+ibus_chan_fail:
+ return ret;
+}
+
+static int da9150_charger_remove(struct platform_device *pdev)
+{
+ struct da9150_charger *charger = platform_get_drvdata(pdev);
+ int irq;
+
+ /* Make sure IRQs are released before unregistering power supplies */
+ irq = platform_get_irq_byname(pdev, "CHG_VBUS");
+ free_irq(irq, charger);
+
+ irq = platform_get_irq_byname(pdev, "CHG_VFAULT");
+ free_irq(irq, charger);
+
+ irq = platform_get_irq_byname(pdev, "CHG_TJUNC");
+ free_irq(irq, charger);
+
+ irq = platform_get_irq_byname(pdev, "CHG_STATUS");
+ free_irq(irq, charger);
+
+ if (!IS_ERR_OR_NULL(charger->usb_phy))
+ usb_unregister_notifier(charger->usb_phy, &charger->otg_nb);
+ cancel_work_sync(&charger->otg_work);
+
+ power_supply_unregister(charger->battery);
+ power_supply_unregister(charger->usb);
+
+ /* Release ADC channels */
+ iio_channel_release(charger->ibus_chan);
+ iio_channel_release(charger->vbus_chan);
+ iio_channel_release(charger->tjunc_chan);
+ iio_channel_release(charger->vbat_chan);
+
+ return 0;
+}
+
+static struct platform_driver da9150_charger_driver = {
+ .driver = {
+ .name = "da9150-charger",
+ },
+ .probe = da9150_charger_probe,
+ .remove = da9150_charger_remove,
+};
+
+module_platform_driver(da9150_charger_driver);
+
+MODULE_DESCRIPTION("Charger Driver for DA9150");
+MODULE_AUTHOR("Adam Thomson <Adam.Thomson.Opensource@diasemi.com>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/power/supply/da9150-fg.c b/drivers/power/supply/da9150-fg.c
new file mode 100644
index 000000000..6e367826a
--- /dev/null
+++ b/drivers/power/supply/da9150-fg.c
@@ -0,0 +1,575 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * DA9150 Fuel-Gauge Driver
+ *
+ * Copyright (c) 2015 Dialog Semiconductor
+ *
+ * Author: Adam Thomson <Adam.Thomson.Opensource@diasemi.com>
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/power_supply.h>
+#include <linux/list.h>
+#include <asm/div64.h>
+#include <linux/mfd/da9150/core.h>
+#include <linux/mfd/da9150/registers.h>
+
+/* Core2Wire */
+#define DA9150_QIF_READ (0x0 << 7)
+#define DA9150_QIF_WRITE (0x1 << 7)
+#define DA9150_QIF_CODE_MASK 0x7F
+
+#define DA9150_QIF_BYTE_SIZE 8
+#define DA9150_QIF_BYTE_MASK 0xFF
+#define DA9150_QIF_SHORT_SIZE 2
+#define DA9150_QIF_LONG_SIZE 4
+
+/* QIF Codes */
+#define DA9150_QIF_UAVG 6
+#define DA9150_QIF_UAVG_SIZE DA9150_QIF_LONG_SIZE
+#define DA9150_QIF_IAVG 8
+#define DA9150_QIF_IAVG_SIZE DA9150_QIF_LONG_SIZE
+#define DA9150_QIF_NTCAVG 12
+#define DA9150_QIF_NTCAVG_SIZE DA9150_QIF_LONG_SIZE
+#define DA9150_QIF_SHUNT_VAL 36
+#define DA9150_QIF_SHUNT_VAL_SIZE DA9150_QIF_SHORT_SIZE
+#define DA9150_QIF_SD_GAIN 38
+#define DA9150_QIF_SD_GAIN_SIZE DA9150_QIF_LONG_SIZE
+#define DA9150_QIF_FCC_MAH 40
+#define DA9150_QIF_FCC_MAH_SIZE DA9150_QIF_SHORT_SIZE
+#define DA9150_QIF_SOC_PCT 43
+#define DA9150_QIF_SOC_PCT_SIZE DA9150_QIF_SHORT_SIZE
+#define DA9150_QIF_CHARGE_LIMIT 44
+#define DA9150_QIF_CHARGE_LIMIT_SIZE DA9150_QIF_SHORT_SIZE
+#define DA9150_QIF_DISCHARGE_LIMIT 45
+#define DA9150_QIF_DISCHARGE_LIMIT_SIZE DA9150_QIF_SHORT_SIZE
+#define DA9150_QIF_FW_MAIN_VER 118
+#define DA9150_QIF_FW_MAIN_VER_SIZE DA9150_QIF_SHORT_SIZE
+#define DA9150_QIF_E_FG_STATUS 126
+#define DA9150_QIF_E_FG_STATUS_SIZE DA9150_QIF_SHORT_SIZE
+#define DA9150_QIF_SYNC 127
+#define DA9150_QIF_SYNC_SIZE DA9150_QIF_SHORT_SIZE
+#define DA9150_QIF_MAX_CODES 128
+
+/* QIF Sync Timeout */
+#define DA9150_QIF_SYNC_TIMEOUT 1000
+#define DA9150_QIF_SYNC_RETRIES 10
+
+/* QIF E_FG_STATUS */
+#define DA9150_FG_IRQ_LOW_SOC_MASK (1 << 0)
+#define DA9150_FG_IRQ_HIGH_SOC_MASK (1 << 1)
+#define DA9150_FG_IRQ_SOC_MASK \
+ (DA9150_FG_IRQ_LOW_SOC_MASK | DA9150_FG_IRQ_HIGH_SOC_MASK)
+
+/* Private data */
+struct da9150_fg {
+ struct da9150 *da9150;
+ struct device *dev;
+
+ struct mutex io_lock;
+
+ struct power_supply *battery;
+ struct delayed_work work;
+ u32 interval;
+
+ int warn_soc;
+ int crit_soc;
+ int soc;
+};
+
+/* Battery Properties */
+static u32 da9150_fg_read_attr(struct da9150_fg *fg, u8 code, u8 size)
+
+{
+ u8 buf[DA9150_QIF_LONG_SIZE];
+ u8 read_addr;
+ u32 res = 0;
+ int i;
+
+ /* Set QIF code (READ mode) */
+ read_addr = (code & DA9150_QIF_CODE_MASK) | DA9150_QIF_READ;
+
+ da9150_read_qif(fg->da9150, read_addr, size, buf);
+ for (i = 0; i < size; ++i)
+ res |= (buf[i] << (i * DA9150_QIF_BYTE_SIZE));
+
+ return res;
+}
+
+static void da9150_fg_write_attr(struct da9150_fg *fg, u8 code, u8 size,
+ u32 val)
+
+{
+ u8 buf[DA9150_QIF_LONG_SIZE];
+ u8 write_addr;
+ int i;
+
+ /* Set QIF code (WRITE mode) */
+ write_addr = (code & DA9150_QIF_CODE_MASK) | DA9150_QIF_WRITE;
+
+ for (i = 0; i < size; ++i) {
+ buf[i] = (val >> (i * DA9150_QIF_BYTE_SIZE)) &
+ DA9150_QIF_BYTE_MASK;
+ }
+ da9150_write_qif(fg->da9150, write_addr, size, buf);
+}
+
+/* Trigger QIF Sync to update QIF readable data */
+static void da9150_fg_read_sync_start(struct da9150_fg *fg)
+{
+ int i = 0;
+ u32 res = 0;
+
+ mutex_lock(&fg->io_lock);
+
+ /* Check if QIF sync already requested, and write to sync if not */
+ res = da9150_fg_read_attr(fg, DA9150_QIF_SYNC,
+ DA9150_QIF_SYNC_SIZE);
+ if (res > 0)
+ da9150_fg_write_attr(fg, DA9150_QIF_SYNC,
+ DA9150_QIF_SYNC_SIZE, 0);
+
+ /* Wait for sync to complete */
+ res = 0;
+ while ((res == 0) && (i++ < DA9150_QIF_SYNC_RETRIES)) {
+ usleep_range(DA9150_QIF_SYNC_TIMEOUT,
+ DA9150_QIF_SYNC_TIMEOUT * 2);
+ res = da9150_fg_read_attr(fg, DA9150_QIF_SYNC,
+ DA9150_QIF_SYNC_SIZE);
+ }
+
+ /* Check if sync completed */
+ if (res == 0)
+ dev_err(fg->dev, "Failed to perform QIF read sync!\n");
+}
+
+/*
+ * Should always be called after QIF sync read has been performed, and all
+ * attributes required have been accessed.
+ */
+static inline void da9150_fg_read_sync_end(struct da9150_fg *fg)
+{
+ mutex_unlock(&fg->io_lock);
+}
+
+/* Sync read of single QIF attribute */
+static u32 da9150_fg_read_attr_sync(struct da9150_fg *fg, u8 code, u8 size)
+{
+ u32 val;
+
+ da9150_fg_read_sync_start(fg);
+ val = da9150_fg_read_attr(fg, code, size);
+ da9150_fg_read_sync_end(fg);
+
+ return val;
+}
+
+/* Wait for QIF Sync, write QIF data and wait for ack */
+static void da9150_fg_write_attr_sync(struct da9150_fg *fg, u8 code, u8 size,
+ u32 val)
+{
+ int i = 0;
+ u32 res = 0, sync_val;
+
+ mutex_lock(&fg->io_lock);
+
+ /* Check if QIF sync already requested */
+ res = da9150_fg_read_attr(fg, DA9150_QIF_SYNC,
+ DA9150_QIF_SYNC_SIZE);
+
+ /* Wait for an existing sync to complete */
+ while ((res == 0) && (i++ < DA9150_QIF_SYNC_RETRIES)) {
+ usleep_range(DA9150_QIF_SYNC_TIMEOUT,
+ DA9150_QIF_SYNC_TIMEOUT * 2);
+ res = da9150_fg_read_attr(fg, DA9150_QIF_SYNC,
+ DA9150_QIF_SYNC_SIZE);
+ }
+
+ if (res == 0) {
+ dev_err(fg->dev, "Timeout waiting for existing QIF sync!\n");
+ mutex_unlock(&fg->io_lock);
+ return;
+ }
+
+ /* Write value for QIF code */
+ da9150_fg_write_attr(fg, code, size, val);
+
+ /* Wait for write acknowledgment */
+ i = 0;
+ sync_val = res;
+ while ((res == sync_val) && (i++ < DA9150_QIF_SYNC_RETRIES)) {
+ usleep_range(DA9150_QIF_SYNC_TIMEOUT,
+ DA9150_QIF_SYNC_TIMEOUT * 2);
+ res = da9150_fg_read_attr(fg, DA9150_QIF_SYNC,
+ DA9150_QIF_SYNC_SIZE);
+ }
+
+ mutex_unlock(&fg->io_lock);
+
+ /* Check write was actually successful */
+ if (res != (sync_val + 1))
+ dev_err(fg->dev, "Error performing QIF sync write for code %d\n",
+ code);
+}
+
+/* Power Supply attributes */
+static int da9150_fg_capacity(struct da9150_fg *fg,
+ union power_supply_propval *val)
+{
+ val->intval = da9150_fg_read_attr_sync(fg, DA9150_QIF_SOC_PCT,
+ DA9150_QIF_SOC_PCT_SIZE);
+
+ if (val->intval > 100)
+ val->intval = 100;
+
+ return 0;
+}
+
+static int da9150_fg_current_avg(struct da9150_fg *fg,
+ union power_supply_propval *val)
+{
+ u32 iavg, sd_gain, shunt_val;
+ u64 div, res;
+
+ da9150_fg_read_sync_start(fg);
+ iavg = da9150_fg_read_attr(fg, DA9150_QIF_IAVG,
+ DA9150_QIF_IAVG_SIZE);
+ shunt_val = da9150_fg_read_attr(fg, DA9150_QIF_SHUNT_VAL,
+ DA9150_QIF_SHUNT_VAL_SIZE);
+ sd_gain = da9150_fg_read_attr(fg, DA9150_QIF_SD_GAIN,
+ DA9150_QIF_SD_GAIN_SIZE);
+ da9150_fg_read_sync_end(fg);
+
+ div = (u64) (sd_gain * shunt_val * 65536ULL);
+ do_div(div, 1000000);
+ res = (u64) (iavg * 1000000ULL);
+ do_div(res, div);
+
+ val->intval = (int) res;
+
+ return 0;
+}
+
+static int da9150_fg_voltage_avg(struct da9150_fg *fg,
+ union power_supply_propval *val)
+{
+ u64 res;
+
+ val->intval = da9150_fg_read_attr_sync(fg, DA9150_QIF_UAVG,
+ DA9150_QIF_UAVG_SIZE);
+
+ res = (u64) (val->intval * 186ULL);
+ do_div(res, 10000);
+ val->intval = (int) res;
+
+ return 0;
+}
+
+static int da9150_fg_charge_full(struct da9150_fg *fg,
+ union power_supply_propval *val)
+{
+ val->intval = da9150_fg_read_attr_sync(fg, DA9150_QIF_FCC_MAH,
+ DA9150_QIF_FCC_MAH_SIZE);
+
+ val->intval = val->intval * 1000;
+
+ return 0;
+}
+
+/*
+ * Temperature reading from device is only valid if battery/system provides
+ * valid NTC to associated pin of DA9150 chip.
+ */
+static int da9150_fg_temp(struct da9150_fg *fg,
+ union power_supply_propval *val)
+{
+ val->intval = da9150_fg_read_attr_sync(fg, DA9150_QIF_NTCAVG,
+ DA9150_QIF_NTCAVG_SIZE);
+
+ val->intval = (val->intval * 10) / 1048576;
+
+ return 0;
+}
+
+static enum power_supply_property da9150_fg_props[] = {
+ POWER_SUPPLY_PROP_CAPACITY,
+ POWER_SUPPLY_PROP_CURRENT_AVG,
+ POWER_SUPPLY_PROP_VOLTAGE_AVG,
+ POWER_SUPPLY_PROP_CHARGE_FULL,
+ POWER_SUPPLY_PROP_TEMP,
+};
+
+static int da9150_fg_get_prop(struct power_supply *psy,
+ enum power_supply_property psp,
+ union power_supply_propval *val)
+{
+ struct da9150_fg *fg = dev_get_drvdata(psy->dev.parent);
+ int ret;
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_CAPACITY:
+ ret = da9150_fg_capacity(fg, val);
+ break;
+ case POWER_SUPPLY_PROP_CURRENT_AVG:
+ ret = da9150_fg_current_avg(fg, val);
+ break;
+ case POWER_SUPPLY_PROP_VOLTAGE_AVG:
+ ret = da9150_fg_voltage_avg(fg, val);
+ break;
+ case POWER_SUPPLY_PROP_CHARGE_FULL:
+ ret = da9150_fg_charge_full(fg, val);
+ break;
+ case POWER_SUPPLY_PROP_TEMP:
+ ret = da9150_fg_temp(fg, val);
+ break;
+ default:
+ ret = -EINVAL;
+ break;
+ }
+
+ return ret;
+}
+
+/* Repeated SOC check */
+static bool da9150_fg_soc_changed(struct da9150_fg *fg)
+{
+ union power_supply_propval val;
+
+ da9150_fg_capacity(fg, &val);
+ if (val.intval != fg->soc) {
+ fg->soc = val.intval;
+ return true;
+ }
+
+ return false;
+}
+
+static void da9150_fg_work(struct work_struct *work)
+{
+ struct da9150_fg *fg = container_of(work, struct da9150_fg, work.work);
+
+ /* Report if SOC has changed */
+ if (da9150_fg_soc_changed(fg))
+ power_supply_changed(fg->battery);
+
+ schedule_delayed_work(&fg->work, msecs_to_jiffies(fg->interval));
+}
+
+/* SOC level event configuration */
+static void da9150_fg_soc_event_config(struct da9150_fg *fg)
+{
+ int soc;
+
+ soc = da9150_fg_read_attr_sync(fg, DA9150_QIF_SOC_PCT,
+ DA9150_QIF_SOC_PCT_SIZE);
+
+ if (soc > fg->warn_soc) {
+ /* If SOC > warn level, set discharge warn level event */
+ da9150_fg_write_attr_sync(fg, DA9150_QIF_DISCHARGE_LIMIT,
+ DA9150_QIF_DISCHARGE_LIMIT_SIZE,
+ fg->warn_soc + 1);
+ } else if ((soc <= fg->warn_soc) && (soc > fg->crit_soc)) {
+ /*
+ * If SOC <= warn level, set discharge crit level event,
+ * and set charge warn level event.
+ */
+ da9150_fg_write_attr_sync(fg, DA9150_QIF_DISCHARGE_LIMIT,
+ DA9150_QIF_DISCHARGE_LIMIT_SIZE,
+ fg->crit_soc + 1);
+
+ da9150_fg_write_attr_sync(fg, DA9150_QIF_CHARGE_LIMIT,
+ DA9150_QIF_CHARGE_LIMIT_SIZE,
+ fg->warn_soc);
+ } else if (soc <= fg->crit_soc) {
+ /* If SOC <= crit level, set charge crit level event */
+ da9150_fg_write_attr_sync(fg, DA9150_QIF_CHARGE_LIMIT,
+ DA9150_QIF_CHARGE_LIMIT_SIZE,
+ fg->crit_soc);
+ }
+}
+
+static irqreturn_t da9150_fg_irq(int irq, void *data)
+{
+ struct da9150_fg *fg = data;
+ u32 e_fg_status;
+
+ /* Read FG IRQ status info */
+ e_fg_status = da9150_fg_read_attr(fg, DA9150_QIF_E_FG_STATUS,
+ DA9150_QIF_E_FG_STATUS_SIZE);
+
+ /* Handle warning/critical threhold events */
+ if (e_fg_status & DA9150_FG_IRQ_SOC_MASK)
+ da9150_fg_soc_event_config(fg);
+
+ /* Clear any FG IRQs */
+ da9150_fg_write_attr(fg, DA9150_QIF_E_FG_STATUS,
+ DA9150_QIF_E_FG_STATUS_SIZE, e_fg_status);
+
+ return IRQ_HANDLED;
+}
+
+static struct da9150_fg_pdata *da9150_fg_dt_pdata(struct device *dev)
+{
+ struct device_node *fg_node = dev->of_node;
+ struct da9150_fg_pdata *pdata;
+
+ pdata = devm_kzalloc(dev, sizeof(struct da9150_fg_pdata), GFP_KERNEL);
+ if (!pdata)
+ return NULL;
+
+ of_property_read_u32(fg_node, "dlg,update-interval",
+ &pdata->update_interval);
+ of_property_read_u8(fg_node, "dlg,warn-soc-level",
+ &pdata->warn_soc_lvl);
+ of_property_read_u8(fg_node, "dlg,crit-soc-level",
+ &pdata->crit_soc_lvl);
+
+ return pdata;
+}
+
+static const struct power_supply_desc fg_desc = {
+ .name = "da9150-fg",
+ .type = POWER_SUPPLY_TYPE_BATTERY,
+ .properties = da9150_fg_props,
+ .num_properties = ARRAY_SIZE(da9150_fg_props),
+ .get_property = da9150_fg_get_prop,
+};
+
+static int da9150_fg_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct da9150 *da9150 = dev_get_drvdata(dev->parent);
+ struct da9150_fg_pdata *fg_pdata = dev_get_platdata(dev);
+ struct da9150_fg *fg;
+ int ver, irq, ret = 0;
+
+ fg = devm_kzalloc(dev, sizeof(*fg), GFP_KERNEL);
+ if (fg == NULL)
+ return -ENOMEM;
+
+ platform_set_drvdata(pdev, fg);
+ fg->da9150 = da9150;
+ fg->dev = dev;
+
+ mutex_init(&fg->io_lock);
+
+ /* Enable QIF */
+ da9150_set_bits(da9150, DA9150_CORE2WIRE_CTRL_A, DA9150_FG_QIF_EN_MASK,
+ DA9150_FG_QIF_EN_MASK);
+
+ fg->battery = devm_power_supply_register(dev, &fg_desc, NULL);
+ if (IS_ERR(fg->battery)) {
+ ret = PTR_ERR(fg->battery);
+ return ret;
+ }
+
+ ver = da9150_fg_read_attr(fg, DA9150_QIF_FW_MAIN_VER,
+ DA9150_QIF_FW_MAIN_VER_SIZE);
+ dev_info(dev, "Version: 0x%x\n", ver);
+
+ /* Handle DT data if provided */
+ if (dev->of_node) {
+ fg_pdata = da9150_fg_dt_pdata(dev);
+ dev->platform_data = fg_pdata;
+ }
+
+ /* Handle any pdata provided */
+ if (fg_pdata) {
+ fg->interval = fg_pdata->update_interval;
+
+ if (fg_pdata->warn_soc_lvl > 100)
+ dev_warn(dev, "Invalid SOC warning level provided, Ignoring");
+ else
+ fg->warn_soc = fg_pdata->warn_soc_lvl;
+
+ if ((fg_pdata->crit_soc_lvl > 100) ||
+ (fg_pdata->crit_soc_lvl >= fg_pdata->warn_soc_lvl))
+ dev_warn(dev, "Invalid SOC critical level provided, Ignoring");
+ else
+ fg->crit_soc = fg_pdata->crit_soc_lvl;
+
+
+ }
+
+ /* Configure initial SOC level events */
+ da9150_fg_soc_event_config(fg);
+
+ /*
+ * If an interval period has been provided then setup repeating
+ * work for reporting data updates.
+ */
+ if (fg->interval) {
+ INIT_DELAYED_WORK(&fg->work, da9150_fg_work);
+ schedule_delayed_work(&fg->work,
+ msecs_to_jiffies(fg->interval));
+ }
+
+ /* Register IRQ */
+ irq = platform_get_irq_byname(pdev, "FG");
+ if (irq < 0) {
+ dev_err(dev, "Failed to get IRQ FG: %d\n", irq);
+ ret = irq;
+ goto irq_fail;
+ }
+
+ ret = devm_request_threaded_irq(dev, irq, NULL, da9150_fg_irq,
+ IRQF_ONESHOT, "FG", fg);
+ if (ret) {
+ dev_err(dev, "Failed to request IRQ %d: %d\n", irq, ret);
+ goto irq_fail;
+ }
+
+ return 0;
+
+irq_fail:
+ if (fg->interval)
+ cancel_delayed_work(&fg->work);
+
+ return ret;
+}
+
+static int da9150_fg_remove(struct platform_device *pdev)
+{
+ struct da9150_fg *fg = platform_get_drvdata(pdev);
+
+ if (fg->interval)
+ cancel_delayed_work(&fg->work);
+
+ return 0;
+}
+
+static int da9150_fg_resume(struct platform_device *pdev)
+{
+ struct da9150_fg *fg = platform_get_drvdata(pdev);
+
+ /*
+ * Trigger SOC check to happen now so as to indicate any value change
+ * since last check before suspend.
+ */
+ if (fg->interval)
+ flush_delayed_work(&fg->work);
+
+ return 0;
+}
+
+static struct platform_driver da9150_fg_driver = {
+ .driver = {
+ .name = "da9150-fuel-gauge",
+ },
+ .probe = da9150_fg_probe,
+ .remove = da9150_fg_remove,
+ .resume = da9150_fg_resume,
+};
+
+module_platform_driver(da9150_fg_driver);
+
+MODULE_DESCRIPTION("Fuel-Gauge Driver for DA9150");
+MODULE_AUTHOR("Adam Thomson <Adam.Thomson.Opensource@diasemi.com>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/power/supply/ds2760_battery.c b/drivers/power/supply/ds2760_battery.c
new file mode 100644
index 000000000..695bb6747
--- /dev/null
+++ b/drivers/power/supply/ds2760_battery.c
@@ -0,0 +1,816 @@
+/*
+ * Driver for batteries with DS2760 chips inside.
+ *
+ * Copyright © 2007 Anton Vorontsov
+ * 2004-2007 Matt Reimer
+ * 2004 Szabolcs Gyurko
+ *
+ * Use consistent with the GNU GPL is permitted,
+ * provided that this copyright notice is
+ * preserved in its entirety in all copies and derived works.
+ *
+ * Author: Anton Vorontsov <cbou@mail.ru>
+ * February 2007
+ *
+ * Matt Reimer <mreimer@vpop.net>
+ * April 2004, 2005, 2007
+ *
+ * Szabolcs Gyurko <szabolcs.gyurko@tlt.hu>
+ * September 2004
+ */
+
+#include <linux/module.h>
+#include <linux/param.h>
+#include <linux/jiffies.h>
+#include <linux/workqueue.h>
+#include <linux/pm.h>
+#include <linux/slab.h>
+#include <linux/platform_device.h>
+#include <linux/power_supply.h>
+#include <linux/suspend.h>
+#include <linux/w1.h>
+#include <linux/of.h>
+
+static unsigned int cache_time = 1000;
+module_param(cache_time, uint, 0644);
+MODULE_PARM_DESC(cache_time, "cache time in milliseconds");
+
+static bool pmod_enabled;
+module_param(pmod_enabled, bool, 0644);
+MODULE_PARM_DESC(pmod_enabled, "PMOD enable bit");
+
+static unsigned int rated_capacity;
+module_param(rated_capacity, uint, 0644);
+MODULE_PARM_DESC(rated_capacity, "rated battery capacity, 10*mAh or index");
+
+static unsigned int current_accum;
+module_param(current_accum, uint, 0644);
+MODULE_PARM_DESC(current_accum, "current accumulator value");
+
+#define W1_FAMILY_DS2760 0x30
+
+/* Known commands to the DS2760 chip */
+#define W1_DS2760_SWAP 0xAA
+#define W1_DS2760_READ_DATA 0x69
+#define W1_DS2760_WRITE_DATA 0x6C
+#define W1_DS2760_COPY_DATA 0x48
+#define W1_DS2760_RECALL_DATA 0xB8
+#define W1_DS2760_LOCK 0x6A
+
+/* Number of valid register addresses */
+#define DS2760_DATA_SIZE 0x40
+
+#define DS2760_PROTECTION_REG 0x00
+
+#define DS2760_STATUS_REG 0x01
+#define DS2760_STATUS_IE (1 << 2)
+#define DS2760_STATUS_SWEN (1 << 3)
+#define DS2760_STATUS_RNAOP (1 << 4)
+#define DS2760_STATUS_PMOD (1 << 5)
+
+#define DS2760_EEPROM_REG 0x07
+#define DS2760_SPECIAL_FEATURE_REG 0x08
+#define DS2760_VOLTAGE_MSB 0x0c
+#define DS2760_VOLTAGE_LSB 0x0d
+#define DS2760_CURRENT_MSB 0x0e
+#define DS2760_CURRENT_LSB 0x0f
+#define DS2760_CURRENT_ACCUM_MSB 0x10
+#define DS2760_CURRENT_ACCUM_LSB 0x11
+#define DS2760_TEMP_MSB 0x18
+#define DS2760_TEMP_LSB 0x19
+#define DS2760_EEPROM_BLOCK0 0x20
+#define DS2760_ACTIVE_FULL 0x20
+#define DS2760_EEPROM_BLOCK1 0x30
+#define DS2760_STATUS_WRITE_REG 0x31
+#define DS2760_RATED_CAPACITY 0x32
+#define DS2760_CURRENT_OFFSET_BIAS 0x33
+#define DS2760_ACTIVE_EMPTY 0x3b
+
+struct ds2760_device_info {
+ struct device *dev;
+
+ /* DS2760 data, valid after calling ds2760_battery_read_status() */
+ unsigned long update_time; /* jiffies when data read */
+ char raw[DS2760_DATA_SIZE]; /* raw DS2760 data */
+ int voltage_raw; /* units of 4.88 mV */
+ int voltage_uV; /* units of µV */
+ int current_raw; /* units of 0.625 mA */
+ int current_uA; /* units of µA */
+ int accum_current_raw; /* units of 0.25 mAh */
+ int accum_current_uAh; /* units of µAh */
+ int temp_raw; /* units of 0.125 °C */
+ int temp_C; /* units of 0.1 °C */
+ int rated_capacity; /* units of µAh */
+ int rem_capacity; /* percentage */
+ int full_active_uAh; /* units of µAh */
+ int empty_uAh; /* units of µAh */
+ int life_sec; /* units of seconds */
+ int charge_status; /* POWER_SUPPLY_STATUS_* */
+
+ int full_counter;
+ struct power_supply *bat;
+ struct power_supply_desc bat_desc;
+ struct workqueue_struct *monitor_wqueue;
+ struct delayed_work monitor_work;
+ struct delayed_work set_charged_work;
+ struct notifier_block pm_notifier;
+};
+
+static int w1_ds2760_io(struct device *dev, char *buf, int addr, size_t count,
+ int io)
+{
+ struct w1_slave *sl = container_of(dev, struct w1_slave, dev);
+
+ if (!dev)
+ return 0;
+
+ mutex_lock(&sl->master->bus_mutex);
+
+ if (addr > DS2760_DATA_SIZE || addr < 0) {
+ count = 0;
+ goto out;
+ }
+ if (addr + count > DS2760_DATA_SIZE)
+ count = DS2760_DATA_SIZE - addr;
+
+ if (!w1_reset_select_slave(sl)) {
+ if (!io) {
+ w1_write_8(sl->master, W1_DS2760_READ_DATA);
+ w1_write_8(sl->master, addr);
+ count = w1_read_block(sl->master, buf, count);
+ } else {
+ w1_write_8(sl->master, W1_DS2760_WRITE_DATA);
+ w1_write_8(sl->master, addr);
+ w1_write_block(sl->master, buf, count);
+ /* XXX w1_write_block returns void, not n_written */
+ }
+ }
+
+out:
+ mutex_unlock(&sl->master->bus_mutex);
+
+ return count;
+}
+
+static int w1_ds2760_read(struct device *dev,
+ char *buf, int addr,
+ size_t count)
+{
+ return w1_ds2760_io(dev, buf, addr, count, 0);
+}
+
+static int w1_ds2760_write(struct device *dev,
+ char *buf,
+ int addr, size_t count)
+{
+ return w1_ds2760_io(dev, buf, addr, count, 1);
+}
+
+static int w1_ds2760_eeprom_cmd(struct device *dev, int addr, int cmd)
+{
+ struct w1_slave *sl = container_of(dev, struct w1_slave, dev);
+
+ if (!dev)
+ return -EINVAL;
+
+ mutex_lock(&sl->master->bus_mutex);
+
+ if (w1_reset_select_slave(sl) == 0) {
+ w1_write_8(sl->master, cmd);
+ w1_write_8(sl->master, addr);
+ }
+
+ mutex_unlock(&sl->master->bus_mutex);
+ return 0;
+}
+
+static int w1_ds2760_store_eeprom(struct device *dev, int addr)
+{
+ return w1_ds2760_eeprom_cmd(dev, addr, W1_DS2760_COPY_DATA);
+}
+
+static int w1_ds2760_recall_eeprom(struct device *dev, int addr)
+{
+ return w1_ds2760_eeprom_cmd(dev, addr, W1_DS2760_RECALL_DATA);
+}
+
+static ssize_t w1_slave_read(struct file *filp, struct kobject *kobj,
+ struct bin_attribute *bin_attr, char *buf,
+ loff_t off, size_t count)
+{
+ struct device *dev = container_of(kobj, struct device, kobj);
+ return w1_ds2760_read(dev, buf, off, count);
+}
+
+static BIN_ATTR_RO(w1_slave, DS2760_DATA_SIZE);
+
+static struct bin_attribute *w1_ds2760_bin_attrs[] = {
+ &bin_attr_w1_slave,
+ NULL,
+};
+
+static const struct attribute_group w1_ds2760_group = {
+ .bin_attrs = w1_ds2760_bin_attrs,
+};
+
+static const struct attribute_group *w1_ds2760_groups[] = {
+ &w1_ds2760_group,
+ NULL,
+};
+/* Some batteries have their rated capacity stored a N * 10 mAh, while
+ * others use an index into this table. */
+static int rated_capacities[] = {
+ 0,
+ 920, /* Samsung */
+ 920, /* BYD */
+ 920, /* Lishen */
+ 920, /* NEC */
+ 1440, /* Samsung */
+ 1440, /* BYD */
+#ifdef CONFIG_MACH_H4700
+ 1800, /* HP iPAQ hx4700 3.7V 1800mAh (359113-001) */
+#else
+ 1440, /* Lishen */
+#endif
+ 1440, /* NEC */
+ 2880, /* Samsung */
+ 2880, /* BYD */
+ 2880, /* Lishen */
+ 2880, /* NEC */
+#ifdef CONFIG_MACH_H4700
+ 0,
+ 3600, /* HP iPAQ hx4700 3.7V 3600mAh (359114-001) */
+#endif
+};
+
+/* array is level at temps 0°C, 10°C, 20°C, 30°C, 40°C
+ * temp is in Celsius */
+static int battery_interpolate(int array[], int temp)
+{
+ int index, dt;
+
+ if (temp <= 0)
+ return array[0];
+ if (temp >= 40)
+ return array[4];
+
+ index = temp / 10;
+ dt = temp % 10;
+
+ return array[index] + (((array[index + 1] - array[index]) * dt) / 10);
+}
+
+static int ds2760_battery_read_status(struct ds2760_device_info *di)
+{
+ int ret, i, start, count, scale[5];
+
+ if (di->update_time && time_before(jiffies, di->update_time +
+ msecs_to_jiffies(cache_time)))
+ return 0;
+
+ /* The first time we read the entire contents of SRAM/EEPROM,
+ * but after that we just read the interesting bits that change. */
+ if (di->update_time == 0) {
+ start = 0;
+ count = DS2760_DATA_SIZE;
+ } else {
+ start = DS2760_VOLTAGE_MSB;
+ count = DS2760_TEMP_LSB - start + 1;
+ }
+
+ ret = w1_ds2760_read(di->dev, di->raw + start, start, count);
+ if (ret != count) {
+ dev_warn(di->dev, "call to w1_ds2760_read failed (0x%p)\n",
+ di->dev);
+ return 1;
+ }
+
+ di->update_time = jiffies;
+
+ /* DS2760 reports voltage in units of 4.88mV, but the battery class
+ * reports in units of uV, so convert by multiplying by 4880. */
+ di->voltage_raw = (di->raw[DS2760_VOLTAGE_MSB] << 3) |
+ (di->raw[DS2760_VOLTAGE_LSB] >> 5);
+ di->voltage_uV = di->voltage_raw * 4880;
+
+ /* DS2760 reports current in signed units of 0.625mA, but the battery
+ * class reports in units of µA, so convert by multiplying by 625. */
+ di->current_raw =
+ (((signed char)di->raw[DS2760_CURRENT_MSB]) << 5) |
+ (di->raw[DS2760_CURRENT_LSB] >> 3);
+ di->current_uA = di->current_raw * 625;
+
+ /* DS2760 reports accumulated current in signed units of 0.25mAh. */
+ di->accum_current_raw =
+ (((signed char)di->raw[DS2760_CURRENT_ACCUM_MSB]) << 8) |
+ di->raw[DS2760_CURRENT_ACCUM_LSB];
+ di->accum_current_uAh = di->accum_current_raw * 250;
+
+ /* DS2760 reports temperature in signed units of 0.125°C, but the
+ * battery class reports in units of 1/10 °C, so we convert by
+ * multiplying by .125 * 10 = 1.25. */
+ di->temp_raw = (((signed char)di->raw[DS2760_TEMP_MSB]) << 3) |
+ (di->raw[DS2760_TEMP_LSB] >> 5);
+ di->temp_C = di->temp_raw + (di->temp_raw / 4);
+
+ /* At least some battery monitors (e.g. HP iPAQ) store the battery's
+ * maximum rated capacity. */
+ if (di->raw[DS2760_RATED_CAPACITY] < ARRAY_SIZE(rated_capacities))
+ di->rated_capacity = rated_capacities[
+ (unsigned int)di->raw[DS2760_RATED_CAPACITY]];
+ else
+ di->rated_capacity = di->raw[DS2760_RATED_CAPACITY] * 10;
+
+ di->rated_capacity *= 1000; /* convert to µAh */
+
+ /* Calculate the full level at the present temperature. */
+ di->full_active_uAh = di->raw[DS2760_ACTIVE_FULL] << 8 |
+ di->raw[DS2760_ACTIVE_FULL + 1];
+
+ /* If the full_active_uAh value is not given, fall back to the rated
+ * capacity. This is likely to happen when chips are not part of the
+ * battery pack and is therefore not bootstrapped. */
+ if (di->full_active_uAh == 0)
+ di->full_active_uAh = di->rated_capacity / 1000L;
+
+ scale[0] = di->full_active_uAh;
+ for (i = 1; i < 5; i++)
+ scale[i] = scale[i - 1] + di->raw[DS2760_ACTIVE_FULL + 1 + i];
+
+ di->full_active_uAh = battery_interpolate(scale, di->temp_C / 10);
+ di->full_active_uAh *= 1000; /* convert to µAh */
+
+ /* Calculate the empty level at the present temperature. */
+ scale[4] = di->raw[DS2760_ACTIVE_EMPTY + 4];
+ for (i = 3; i >= 0; i--)
+ scale[i] = scale[i + 1] + di->raw[DS2760_ACTIVE_EMPTY + i];
+
+ di->empty_uAh = battery_interpolate(scale, di->temp_C / 10);
+ di->empty_uAh *= 1000; /* convert to µAh */
+
+ if (di->full_active_uAh == di->empty_uAh)
+ di->rem_capacity = 0;
+ else
+ /* From Maxim Application Note 131: remaining capacity =
+ * ((ICA - Empty Value) / (Full Value - Empty Value)) x 100% */
+ di->rem_capacity = ((di->accum_current_uAh - di->empty_uAh) * 100L) /
+ (di->full_active_uAh - di->empty_uAh);
+
+ if (di->rem_capacity < 0)
+ di->rem_capacity = 0;
+ if (di->rem_capacity > 100)
+ di->rem_capacity = 100;
+
+ if (di->current_uA < -100L)
+ di->life_sec = -((di->accum_current_uAh - di->empty_uAh) * 36L)
+ / (di->current_uA / 100L);
+ else
+ di->life_sec = 0;
+
+ return 0;
+}
+
+static void ds2760_battery_set_current_accum(struct ds2760_device_info *di,
+ unsigned int acr_val)
+{
+ unsigned char acr[2];
+
+ /* acr is in units of 0.25 mAh */
+ acr_val *= 4L;
+ acr_val /= 1000;
+
+ acr[0] = acr_val >> 8;
+ acr[1] = acr_val & 0xff;
+
+ if (w1_ds2760_write(di->dev, acr, DS2760_CURRENT_ACCUM_MSB, 2) < 2)
+ dev_warn(di->dev, "ACR write failed\n");
+}
+
+static void ds2760_battery_update_status(struct ds2760_device_info *di)
+{
+ int old_charge_status = di->charge_status;
+
+ ds2760_battery_read_status(di);
+
+ if (di->charge_status == POWER_SUPPLY_STATUS_UNKNOWN)
+ di->full_counter = 0;
+
+ if (power_supply_am_i_supplied(di->bat)) {
+ if (di->current_uA > 10000) {
+ di->charge_status = POWER_SUPPLY_STATUS_CHARGING;
+ di->full_counter = 0;
+ } else if (di->current_uA < -5000) {
+ if (di->charge_status != POWER_SUPPLY_STATUS_NOT_CHARGING)
+ dev_notice(di->dev, "not enough power to "
+ "charge\n");
+ di->charge_status = POWER_SUPPLY_STATUS_NOT_CHARGING;
+ di->full_counter = 0;
+ } else if (di->current_uA < 10000 &&
+ di->charge_status != POWER_SUPPLY_STATUS_FULL) {
+
+ /* Don't consider the battery to be full unless
+ * we've seen the current < 10 mA at least two
+ * consecutive times. */
+
+ di->full_counter++;
+
+ if (di->full_counter < 2) {
+ di->charge_status = POWER_SUPPLY_STATUS_CHARGING;
+ } else {
+ di->charge_status = POWER_SUPPLY_STATUS_FULL;
+ ds2760_battery_set_current_accum(di,
+ di->full_active_uAh);
+ }
+ }
+ } else {
+ di->charge_status = POWER_SUPPLY_STATUS_DISCHARGING;
+ di->full_counter = 0;
+ }
+
+ if (di->charge_status != old_charge_status)
+ power_supply_changed(di->bat);
+}
+
+static void ds2760_battery_write_status(struct ds2760_device_info *di,
+ char status)
+{
+ if (status == di->raw[DS2760_STATUS_REG])
+ return;
+
+ w1_ds2760_write(di->dev, &status, DS2760_STATUS_WRITE_REG, 1);
+ w1_ds2760_store_eeprom(di->dev, DS2760_EEPROM_BLOCK1);
+ w1_ds2760_recall_eeprom(di->dev, DS2760_EEPROM_BLOCK1);
+}
+
+static void ds2760_battery_write_rated_capacity(struct ds2760_device_info *di,
+ unsigned char rated_capacity)
+{
+ if (rated_capacity == di->raw[DS2760_RATED_CAPACITY])
+ return;
+
+ w1_ds2760_write(di->dev, &rated_capacity, DS2760_RATED_CAPACITY, 1);
+ w1_ds2760_store_eeprom(di->dev, DS2760_EEPROM_BLOCK1);
+ w1_ds2760_recall_eeprom(di->dev, DS2760_EEPROM_BLOCK1);
+}
+
+static void ds2760_battery_write_active_full(struct ds2760_device_info *di,
+ int active_full)
+{
+ unsigned char tmp[2] = {
+ active_full >> 8,
+ active_full & 0xff
+ };
+
+ if (tmp[0] == di->raw[DS2760_ACTIVE_FULL] &&
+ tmp[1] == di->raw[DS2760_ACTIVE_FULL + 1])
+ return;
+
+ w1_ds2760_write(di->dev, tmp, DS2760_ACTIVE_FULL, sizeof(tmp));
+ w1_ds2760_store_eeprom(di->dev, DS2760_EEPROM_BLOCK0);
+ w1_ds2760_recall_eeprom(di->dev, DS2760_EEPROM_BLOCK0);
+
+ /* Write to the di->raw[] buffer directly - the DS2760_ACTIVE_FULL
+ * values won't be read back by ds2760_battery_read_status() */
+ di->raw[DS2760_ACTIVE_FULL] = tmp[0];
+ di->raw[DS2760_ACTIVE_FULL + 1] = tmp[1];
+}
+
+static void ds2760_battery_work(struct work_struct *work)
+{
+ struct ds2760_device_info *di = container_of(work,
+ struct ds2760_device_info, monitor_work.work);
+ const int interval = HZ * 60;
+
+ dev_dbg(di->dev, "%s\n", __func__);
+
+ ds2760_battery_update_status(di);
+ queue_delayed_work(di->monitor_wqueue, &di->monitor_work, interval);
+}
+
+static void ds2760_battery_external_power_changed(struct power_supply *psy)
+{
+ struct ds2760_device_info *di = power_supply_get_drvdata(psy);
+
+ dev_dbg(di->dev, "%s\n", __func__);
+
+ mod_delayed_work(di->monitor_wqueue, &di->monitor_work, HZ/10);
+}
+
+
+static void ds2760_battery_set_charged_work(struct work_struct *work)
+{
+ char bias;
+ struct ds2760_device_info *di = container_of(work,
+ struct ds2760_device_info, set_charged_work.work);
+
+ dev_dbg(di->dev, "%s\n", __func__);
+
+ ds2760_battery_read_status(di);
+
+ /* When we get notified by external circuitry that the battery is
+ * considered fully charged now, we know that there is no current
+ * flow any more. However, the ds2760's internal current meter is
+ * too inaccurate to rely on - spec say something ~15% failure.
+ * Hence, we use the current offset bias register to compensate
+ * that error.
+ */
+
+ if (!power_supply_am_i_supplied(di->bat))
+ return;
+
+ bias = (signed char) di->current_raw +
+ (signed char) di->raw[DS2760_CURRENT_OFFSET_BIAS];
+
+ dev_dbg(di->dev, "%s: bias = %d\n", __func__, bias);
+
+ w1_ds2760_write(di->dev, &bias, DS2760_CURRENT_OFFSET_BIAS, 1);
+ w1_ds2760_store_eeprom(di->dev, DS2760_EEPROM_BLOCK1);
+ w1_ds2760_recall_eeprom(di->dev, DS2760_EEPROM_BLOCK1);
+
+ /* Write to the di->raw[] buffer directly - the CURRENT_OFFSET_BIAS
+ * value won't be read back by ds2760_battery_read_status() */
+ di->raw[DS2760_CURRENT_OFFSET_BIAS] = bias;
+}
+
+static void ds2760_battery_set_charged(struct power_supply *psy)
+{
+ struct ds2760_device_info *di = power_supply_get_drvdata(psy);
+
+ /* postpone the actual work by 20 secs. This is for debouncing GPIO
+ * signals and to let the current value settle. See AN4188. */
+ mod_delayed_work(di->monitor_wqueue, &di->set_charged_work, HZ * 20);
+}
+
+static int ds2760_battery_get_property(struct power_supply *psy,
+ enum power_supply_property psp,
+ union power_supply_propval *val)
+{
+ struct ds2760_device_info *di = power_supply_get_drvdata(psy);
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_STATUS:
+ val->intval = di->charge_status;
+ return 0;
+ default:
+ break;
+ }
+
+ ds2760_battery_read_status(di);
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+ val->intval = di->voltage_uV;
+ break;
+ case POWER_SUPPLY_PROP_CURRENT_NOW:
+ val->intval = di->current_uA;
+ break;
+ case POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN:
+ val->intval = di->rated_capacity;
+ break;
+ case POWER_SUPPLY_PROP_CHARGE_FULL:
+ val->intval = di->full_active_uAh;
+ break;
+ case POWER_SUPPLY_PROP_CHARGE_EMPTY:
+ val->intval = di->empty_uAh;
+ break;
+ case POWER_SUPPLY_PROP_CHARGE_NOW:
+ val->intval = di->accum_current_uAh;
+ break;
+ case POWER_SUPPLY_PROP_TEMP:
+ val->intval = di->temp_C;
+ break;
+ case POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW:
+ val->intval = di->life_sec;
+ break;
+ case POWER_SUPPLY_PROP_CAPACITY:
+ val->intval = di->rem_capacity;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int ds2760_battery_set_property(struct power_supply *psy,
+ enum power_supply_property psp,
+ const union power_supply_propval *val)
+{
+ struct ds2760_device_info *di = power_supply_get_drvdata(psy);
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_CHARGE_FULL:
+ /* the interface counts in uAh, convert the value */
+ ds2760_battery_write_active_full(di, val->intval / 1000L);
+ break;
+
+ case POWER_SUPPLY_PROP_CHARGE_NOW:
+ /* ds2760_battery_set_current_accum() does the conversion */
+ ds2760_battery_set_current_accum(di, val->intval);
+ break;
+
+ default:
+ return -EPERM;
+ }
+
+ return 0;
+}
+
+static int ds2760_battery_property_is_writeable(struct power_supply *psy,
+ enum power_supply_property psp)
+{
+ switch (psp) {
+ case POWER_SUPPLY_PROP_CHARGE_FULL:
+ case POWER_SUPPLY_PROP_CHARGE_NOW:
+ return 1;
+
+ default:
+ break;
+ }
+
+ return 0;
+}
+
+static enum power_supply_property ds2760_battery_props[] = {
+ POWER_SUPPLY_PROP_STATUS,
+ POWER_SUPPLY_PROP_VOLTAGE_NOW,
+ POWER_SUPPLY_PROP_CURRENT_NOW,
+ POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN,
+ POWER_SUPPLY_PROP_CHARGE_FULL,
+ POWER_SUPPLY_PROP_CHARGE_EMPTY,
+ POWER_SUPPLY_PROP_CHARGE_NOW,
+ POWER_SUPPLY_PROP_TEMP,
+ POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW,
+ POWER_SUPPLY_PROP_CAPACITY,
+};
+
+static int ds2760_pm_notifier(struct notifier_block *notifier,
+ unsigned long pm_event,
+ void *unused)
+{
+ struct ds2760_device_info *di =
+ container_of(notifier, struct ds2760_device_info, pm_notifier);
+
+ switch (pm_event) {
+ case PM_HIBERNATION_PREPARE:
+ case PM_SUSPEND_PREPARE:
+ di->charge_status = POWER_SUPPLY_STATUS_UNKNOWN;
+ break;
+
+ case PM_POST_RESTORE:
+ case PM_POST_HIBERNATION:
+ case PM_POST_SUSPEND:
+ di->charge_status = POWER_SUPPLY_STATUS_UNKNOWN;
+ power_supply_changed(di->bat);
+ mod_delayed_work(di->monitor_wqueue, &di->monitor_work, HZ);
+
+ break;
+
+ case PM_RESTORE_PREPARE:
+ default:
+ break;
+ }
+
+ return NOTIFY_DONE;
+}
+
+static int w1_ds2760_add_slave(struct w1_slave *sl)
+{
+ struct power_supply_config psy_cfg = {};
+ struct ds2760_device_info *di;
+ struct device *dev = &sl->dev;
+ int retval = 0;
+ char name[32];
+ char status;
+
+ di = devm_kzalloc(dev, sizeof(*di), GFP_KERNEL);
+ if (!di) {
+ retval = -ENOMEM;
+ goto di_alloc_failed;
+ }
+
+ snprintf(name, sizeof(name), "ds2760-battery.%d", dev->id);
+
+ di->dev = dev;
+ di->bat_desc.name = name;
+ di->bat_desc.type = POWER_SUPPLY_TYPE_BATTERY;
+ di->bat_desc.properties = ds2760_battery_props;
+ di->bat_desc.num_properties = ARRAY_SIZE(ds2760_battery_props);
+ di->bat_desc.get_property = ds2760_battery_get_property;
+ di->bat_desc.set_property = ds2760_battery_set_property;
+ di->bat_desc.property_is_writeable =
+ ds2760_battery_property_is_writeable;
+ di->bat_desc.set_charged = ds2760_battery_set_charged;
+ di->bat_desc.external_power_changed =
+ ds2760_battery_external_power_changed;
+
+ psy_cfg.drv_data = di;
+
+ if (dev->of_node) {
+ u32 tmp;
+
+ psy_cfg.of_node = dev->of_node;
+
+ if (!of_property_read_bool(dev->of_node, "maxim,pmod-enabled"))
+ pmod_enabled = true;
+
+ if (!of_property_read_u32(dev->of_node,
+ "maxim,cache-time-ms", &tmp))
+ cache_time = tmp;
+
+ if (!of_property_read_u32(dev->of_node,
+ "rated-capacity-microamp-hours",
+ &tmp))
+ rated_capacity = tmp / 10; /* property is in mAh */
+ }
+
+ di->charge_status = POWER_SUPPLY_STATUS_UNKNOWN;
+
+ sl->family_data = di;
+
+ /* enable sleep mode feature */
+ ds2760_battery_read_status(di);
+ status = di->raw[DS2760_STATUS_REG];
+ if (pmod_enabled)
+ status |= DS2760_STATUS_PMOD;
+ else
+ status &= ~DS2760_STATUS_PMOD;
+
+ ds2760_battery_write_status(di, status);
+
+ /* set rated capacity from module param or device tree */
+ if (rated_capacity)
+ ds2760_battery_write_rated_capacity(di, rated_capacity);
+
+ /* set current accumulator if given as parameter.
+ * this should only be done for bootstrapping the value */
+ if (current_accum)
+ ds2760_battery_set_current_accum(di, current_accum);
+
+ di->bat = power_supply_register(dev, &di->bat_desc, &psy_cfg);
+ if (IS_ERR(di->bat)) {
+ dev_err(di->dev, "failed to register battery\n");
+ retval = PTR_ERR(di->bat);
+ goto batt_failed;
+ }
+
+ INIT_DELAYED_WORK(&di->monitor_work, ds2760_battery_work);
+ INIT_DELAYED_WORK(&di->set_charged_work,
+ ds2760_battery_set_charged_work);
+ di->monitor_wqueue = alloc_ordered_workqueue(name, WQ_MEM_RECLAIM);
+ if (!di->monitor_wqueue) {
+ retval = -ESRCH;
+ goto workqueue_failed;
+ }
+ queue_delayed_work(di->monitor_wqueue, &di->monitor_work, HZ * 1);
+
+ di->pm_notifier.notifier_call = ds2760_pm_notifier;
+ register_pm_notifier(&di->pm_notifier);
+
+ goto success;
+
+workqueue_failed:
+ power_supply_unregister(di->bat);
+batt_failed:
+di_alloc_failed:
+success:
+ return retval;
+}
+
+static void w1_ds2760_remove_slave(struct w1_slave *sl)
+{
+ struct ds2760_device_info *di = sl->family_data;
+
+ unregister_pm_notifier(&di->pm_notifier);
+ cancel_delayed_work_sync(&di->monitor_work);
+ cancel_delayed_work_sync(&di->set_charged_work);
+ destroy_workqueue(di->monitor_wqueue);
+ power_supply_unregister(di->bat);
+}
+
+#ifdef CONFIG_OF
+static const struct of_device_id w1_ds2760_of_ids[] = {
+ { .compatible = "maxim,ds2760" },
+ {}
+};
+#endif
+
+static const struct w1_family_ops w1_ds2760_fops = {
+ .add_slave = w1_ds2760_add_slave,
+ .remove_slave = w1_ds2760_remove_slave,
+ .groups = w1_ds2760_groups,
+};
+
+static struct w1_family w1_ds2760_family = {
+ .fid = W1_FAMILY_DS2760,
+ .fops = &w1_ds2760_fops,
+ .of_match_table = of_match_ptr(w1_ds2760_of_ids),
+};
+module_w1_family(w1_ds2760_family);
+
+MODULE_AUTHOR("Szabolcs Gyurko <szabolcs.gyurko@tlt.hu>, "
+ "Matt Reimer <mreimer@vpop.net>, "
+ "Anton Vorontsov <cbou@mail.ru>");
+MODULE_DESCRIPTION("1-wire Driver Dallas 2760 battery monitor chip");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("w1-family-" __stringify(W1_FAMILY_DS2760));
diff --git a/drivers/power/supply/ds2780_battery.c b/drivers/power/supply/ds2780_battery.c
new file mode 100644
index 000000000..dd57a472e
--- /dev/null
+++ b/drivers/power/supply/ds2780_battery.c
@@ -0,0 +1,790 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * 1-wire client/driver for the Maxim/Dallas DS2780 Stand-Alone Fuel Gauge IC
+ *
+ * Copyright (C) 2010 Indesign, LLC
+ *
+ * Author: Clifton Barnes <cabarnes@indesign-llc.com>
+ *
+ * Based on ds2760_battery and ds2782_battery drivers
+ */
+
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/param.h>
+#include <linux/pm.h>
+#include <linux/platform_device.h>
+#include <linux/power_supply.h>
+#include <linux/idr.h>
+
+#include <linux/w1.h>
+#include "../../w1/slaves/w1_ds2780.h"
+
+/* Current unit measurement in uA for a 1 milli-ohm sense resistor */
+#define DS2780_CURRENT_UNITS 1563
+/* Charge unit measurement in uAh for a 1 milli-ohm sense resistor */
+#define DS2780_CHARGE_UNITS 6250
+/* Number of bytes in user EEPROM space */
+#define DS2780_USER_EEPROM_SIZE (DS2780_EEPROM_BLOCK0_END - \
+ DS2780_EEPROM_BLOCK0_START + 1)
+/* Number of bytes in parameter EEPROM space */
+#define DS2780_PARAM_EEPROM_SIZE (DS2780_EEPROM_BLOCK1_END - \
+ DS2780_EEPROM_BLOCK1_START + 1)
+
+struct ds2780_device_info {
+ struct device *dev;
+ struct power_supply *bat;
+ struct power_supply_desc bat_desc;
+ struct device *w1_dev;
+};
+
+enum current_types {
+ CURRENT_NOW,
+ CURRENT_AVG,
+};
+
+static const char model[] = "DS2780";
+static const char manufacturer[] = "Maxim/Dallas";
+
+static inline struct ds2780_device_info *
+to_ds2780_device_info(struct power_supply *psy)
+{
+ return power_supply_get_drvdata(psy);
+}
+
+static inline int ds2780_battery_io(struct ds2780_device_info *dev_info,
+ char *buf, int addr, size_t count, int io)
+{
+ return w1_ds2780_io(dev_info->w1_dev, buf, addr, count, io);
+}
+
+static inline int ds2780_read8(struct ds2780_device_info *dev_info, u8 *val,
+ int addr)
+{
+ return ds2780_battery_io(dev_info, val, addr, sizeof(u8), 0);
+}
+
+static int ds2780_read16(struct ds2780_device_info *dev_info, s16 *val,
+ int addr)
+{
+ int ret;
+ u8 raw[2];
+
+ ret = ds2780_battery_io(dev_info, raw, addr, sizeof(raw), 0);
+ if (ret < 0)
+ return ret;
+
+ *val = (raw[0] << 8) | raw[1];
+
+ return 0;
+}
+
+static inline int ds2780_read_block(struct ds2780_device_info *dev_info,
+ u8 *val, int addr, size_t count)
+{
+ return ds2780_battery_io(dev_info, val, addr, count, 0);
+}
+
+static inline int ds2780_write(struct ds2780_device_info *dev_info, u8 *val,
+ int addr, size_t count)
+{
+ return ds2780_battery_io(dev_info, val, addr, count, 1);
+}
+
+static inline int ds2780_store_eeprom(struct device *dev, int addr)
+{
+ return w1_ds2780_eeprom_cmd(dev, addr, W1_DS2780_COPY_DATA);
+}
+
+static inline int ds2780_recall_eeprom(struct device *dev, int addr)
+{
+ return w1_ds2780_eeprom_cmd(dev, addr, W1_DS2780_RECALL_DATA);
+}
+
+static int ds2780_save_eeprom(struct ds2780_device_info *dev_info, int reg)
+{
+ int ret;
+
+ ret = ds2780_store_eeprom(dev_info->w1_dev, reg);
+ if (ret < 0)
+ return ret;
+
+ ret = ds2780_recall_eeprom(dev_info->w1_dev, reg);
+ if (ret < 0)
+ return ret;
+
+ return 0;
+}
+
+/* Set sense resistor value in mhos */
+static int ds2780_set_sense_register(struct ds2780_device_info *dev_info,
+ u8 conductance)
+{
+ int ret;
+
+ ret = ds2780_write(dev_info, &conductance,
+ DS2780_RSNSP_REG, sizeof(u8));
+ if (ret < 0)
+ return ret;
+
+ return ds2780_save_eeprom(dev_info, DS2780_RSNSP_REG);
+}
+
+/* Get RSGAIN value from 0 to 1.999 in steps of 0.001 */
+static int ds2780_get_rsgain_register(struct ds2780_device_info *dev_info,
+ u16 *rsgain)
+{
+ return ds2780_read16(dev_info, rsgain, DS2780_RSGAIN_MSB_REG);
+}
+
+/* Set RSGAIN value from 0 to 1.999 in steps of 0.001 */
+static int ds2780_set_rsgain_register(struct ds2780_device_info *dev_info,
+ u16 rsgain)
+{
+ int ret;
+ u8 raw[] = {rsgain >> 8, rsgain & 0xFF};
+
+ ret = ds2780_write(dev_info, raw,
+ DS2780_RSGAIN_MSB_REG, sizeof(raw));
+ if (ret < 0)
+ return ret;
+
+ return ds2780_save_eeprom(dev_info, DS2780_RSGAIN_MSB_REG);
+}
+
+static int ds2780_get_voltage(struct ds2780_device_info *dev_info,
+ int *voltage_uV)
+{
+ int ret;
+ s16 voltage_raw;
+
+ /*
+ * The voltage value is located in 10 bits across the voltage MSB
+ * and LSB registers in two's complement form
+ * Sign bit of the voltage value is in bit 7 of the voltage MSB register
+ * Bits 9 - 3 of the voltage value are in bits 6 - 0 of the
+ * voltage MSB register
+ * Bits 2 - 0 of the voltage value are in bits 7 - 5 of the
+ * voltage LSB register
+ */
+ ret = ds2780_read16(dev_info, &voltage_raw,
+ DS2780_VOLT_MSB_REG);
+ if (ret < 0)
+ return ret;
+
+ /*
+ * DS2780 reports voltage in units of 4.88mV, but the battery class
+ * reports in units of uV, so convert by multiplying by 4880.
+ */
+ *voltage_uV = (voltage_raw / 32) * 4880;
+ return 0;
+}
+
+static int ds2780_get_temperature(struct ds2780_device_info *dev_info,
+ int *temperature)
+{
+ int ret;
+ s16 temperature_raw;
+
+ /*
+ * The temperature value is located in 10 bits across the temperature
+ * MSB and LSB registers in two's complement form
+ * Sign bit of the temperature value is in bit 7 of the temperature
+ * MSB register
+ * Bits 9 - 3 of the temperature value are in bits 6 - 0 of the
+ * temperature MSB register
+ * Bits 2 - 0 of the temperature value are in bits 7 - 5 of the
+ * temperature LSB register
+ */
+ ret = ds2780_read16(dev_info, &temperature_raw,
+ DS2780_TEMP_MSB_REG);
+ if (ret < 0)
+ return ret;
+
+ /*
+ * Temperature is measured in units of 0.125 degrees celcius, the
+ * power_supply class measures temperature in tenths of degrees
+ * celsius. The temperature value is stored as a 10 bit number, plus
+ * sign in the upper bits of a 16 bit register.
+ */
+ *temperature = ((temperature_raw / 32) * 125) / 100;
+ return 0;
+}
+
+static int ds2780_get_current(struct ds2780_device_info *dev_info,
+ enum current_types type, int *current_uA)
+{
+ int ret, sense_res;
+ s16 current_raw;
+ u8 sense_res_raw, reg_msb;
+
+ /*
+ * The units of measurement for current are dependent on the value of
+ * the sense resistor.
+ */
+ ret = ds2780_read8(dev_info, &sense_res_raw, DS2780_RSNSP_REG);
+ if (ret < 0)
+ return ret;
+
+ if (sense_res_raw == 0) {
+ dev_err(dev_info->dev, "sense resistor value is 0\n");
+ return -EINVAL;
+ }
+ sense_res = 1000 / sense_res_raw;
+
+ if (type == CURRENT_NOW)
+ reg_msb = DS2780_CURRENT_MSB_REG;
+ else if (type == CURRENT_AVG)
+ reg_msb = DS2780_IAVG_MSB_REG;
+ else
+ return -EINVAL;
+
+ /*
+ * The current value is located in 16 bits across the current MSB
+ * and LSB registers in two's complement form
+ * Sign bit of the current value is in bit 7 of the current MSB register
+ * Bits 14 - 8 of the current value are in bits 6 - 0 of the current
+ * MSB register
+ * Bits 7 - 0 of the current value are in bits 7 - 0 of the current
+ * LSB register
+ */
+ ret = ds2780_read16(dev_info, &current_raw, reg_msb);
+ if (ret < 0)
+ return ret;
+
+ *current_uA = current_raw * (DS2780_CURRENT_UNITS / sense_res);
+ return 0;
+}
+
+static int ds2780_get_accumulated_current(struct ds2780_device_info *dev_info,
+ int *accumulated_current)
+{
+ int ret, sense_res;
+ s16 current_raw;
+ u8 sense_res_raw;
+
+ /*
+ * The units of measurement for accumulated current are dependent on
+ * the value of the sense resistor.
+ */
+ ret = ds2780_read8(dev_info, &sense_res_raw, DS2780_RSNSP_REG);
+ if (ret < 0)
+ return ret;
+
+ if (sense_res_raw == 0) {
+ dev_err(dev_info->dev, "sense resistor value is 0\n");
+ return -ENXIO;
+ }
+ sense_res = 1000 / sense_res_raw;
+
+ /*
+ * The ACR value is located in 16 bits across the ACR MSB and
+ * LSB registers
+ * Bits 15 - 8 of the ACR value are in bits 7 - 0 of the ACR
+ * MSB register
+ * Bits 7 - 0 of the ACR value are in bits 7 - 0 of the ACR
+ * LSB register
+ */
+ ret = ds2780_read16(dev_info, &current_raw, DS2780_ACR_MSB_REG);
+ if (ret < 0)
+ return ret;
+
+ *accumulated_current = current_raw * (DS2780_CHARGE_UNITS / sense_res);
+ return 0;
+}
+
+static int ds2780_get_capacity(struct ds2780_device_info *dev_info,
+ int *capacity)
+{
+ int ret;
+ u8 raw;
+
+ ret = ds2780_read8(dev_info, &raw, DS2780_RARC_REG);
+ if (ret < 0)
+ return ret;
+
+ *capacity = raw;
+ return raw;
+}
+
+static int ds2780_get_status(struct ds2780_device_info *dev_info, int *status)
+{
+ int ret, current_uA, capacity;
+
+ ret = ds2780_get_current(dev_info, CURRENT_NOW, &current_uA);
+ if (ret < 0)
+ return ret;
+
+ ret = ds2780_get_capacity(dev_info, &capacity);
+ if (ret < 0)
+ return ret;
+
+ if (capacity == 100)
+ *status = POWER_SUPPLY_STATUS_FULL;
+ else if (current_uA == 0)
+ *status = POWER_SUPPLY_STATUS_NOT_CHARGING;
+ else if (current_uA < 0)
+ *status = POWER_SUPPLY_STATUS_DISCHARGING;
+ else
+ *status = POWER_SUPPLY_STATUS_CHARGING;
+
+ return 0;
+}
+
+static int ds2780_get_charge_now(struct ds2780_device_info *dev_info,
+ int *charge_now)
+{
+ int ret;
+ u16 charge_raw;
+
+ /*
+ * The RAAC value is located in 16 bits across the RAAC MSB and
+ * LSB registers
+ * Bits 15 - 8 of the RAAC value are in bits 7 - 0 of the RAAC
+ * MSB register
+ * Bits 7 - 0 of the RAAC value are in bits 7 - 0 of the RAAC
+ * LSB register
+ */
+ ret = ds2780_read16(dev_info, &charge_raw, DS2780_RAAC_MSB_REG);
+ if (ret < 0)
+ return ret;
+
+ *charge_now = charge_raw * 1600;
+ return 0;
+}
+
+static int ds2780_get_control_register(struct ds2780_device_info *dev_info,
+ u8 *control_reg)
+{
+ return ds2780_read8(dev_info, control_reg, DS2780_CONTROL_REG);
+}
+
+static int ds2780_set_control_register(struct ds2780_device_info *dev_info,
+ u8 control_reg)
+{
+ int ret;
+
+ ret = ds2780_write(dev_info, &control_reg,
+ DS2780_CONTROL_REG, sizeof(u8));
+ if (ret < 0)
+ return ret;
+
+ return ds2780_save_eeprom(dev_info, DS2780_CONTROL_REG);
+}
+
+static int ds2780_battery_get_property(struct power_supply *psy,
+ enum power_supply_property psp,
+ union power_supply_propval *val)
+{
+ int ret = 0;
+ struct ds2780_device_info *dev_info = to_ds2780_device_info(psy);
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+ ret = ds2780_get_voltage(dev_info, &val->intval);
+ break;
+
+ case POWER_SUPPLY_PROP_TEMP:
+ ret = ds2780_get_temperature(dev_info, &val->intval);
+ break;
+
+ case POWER_SUPPLY_PROP_MODEL_NAME:
+ val->strval = model;
+ break;
+
+ case POWER_SUPPLY_PROP_MANUFACTURER:
+ val->strval = manufacturer;
+ break;
+
+ case POWER_SUPPLY_PROP_CURRENT_NOW:
+ ret = ds2780_get_current(dev_info, CURRENT_NOW, &val->intval);
+ break;
+
+ case POWER_SUPPLY_PROP_CURRENT_AVG:
+ ret = ds2780_get_current(dev_info, CURRENT_AVG, &val->intval);
+ break;
+
+ case POWER_SUPPLY_PROP_STATUS:
+ ret = ds2780_get_status(dev_info, &val->intval);
+ break;
+
+ case POWER_SUPPLY_PROP_CAPACITY:
+ ret = ds2780_get_capacity(dev_info, &val->intval);
+ break;
+
+ case POWER_SUPPLY_PROP_CHARGE_COUNTER:
+ ret = ds2780_get_accumulated_current(dev_info, &val->intval);
+ break;
+
+ case POWER_SUPPLY_PROP_CHARGE_NOW:
+ ret = ds2780_get_charge_now(dev_info, &val->intval);
+ break;
+
+ default:
+ ret = -EINVAL;
+ }
+
+ return ret;
+}
+
+static enum power_supply_property ds2780_battery_props[] = {
+ POWER_SUPPLY_PROP_STATUS,
+ POWER_SUPPLY_PROP_VOLTAGE_NOW,
+ POWER_SUPPLY_PROP_TEMP,
+ POWER_SUPPLY_PROP_MODEL_NAME,
+ POWER_SUPPLY_PROP_MANUFACTURER,
+ POWER_SUPPLY_PROP_CURRENT_NOW,
+ POWER_SUPPLY_PROP_CURRENT_AVG,
+ POWER_SUPPLY_PROP_CAPACITY,
+ POWER_SUPPLY_PROP_CHARGE_COUNTER,
+ POWER_SUPPLY_PROP_CHARGE_NOW,
+};
+
+static ssize_t ds2780_get_pmod_enabled(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ int ret;
+ u8 control_reg;
+ struct power_supply *psy = to_power_supply(dev);
+ struct ds2780_device_info *dev_info = to_ds2780_device_info(psy);
+
+ /* Get power mode */
+ ret = ds2780_get_control_register(dev_info, &control_reg);
+ if (ret < 0)
+ return ret;
+
+ return sprintf(buf, "%d\n",
+ !!(control_reg & DS2780_CONTROL_REG_PMOD));
+}
+
+static ssize_t ds2780_set_pmod_enabled(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf,
+ size_t count)
+{
+ int ret;
+ u8 control_reg, new_setting;
+ struct power_supply *psy = to_power_supply(dev);
+ struct ds2780_device_info *dev_info = to_ds2780_device_info(psy);
+
+ /* Set power mode */
+ ret = ds2780_get_control_register(dev_info, &control_reg);
+ if (ret < 0)
+ return ret;
+
+ ret = kstrtou8(buf, 0, &new_setting);
+ if (ret < 0)
+ return ret;
+
+ if ((new_setting != 0) && (new_setting != 1)) {
+ dev_err(dev_info->dev, "Invalid pmod setting (0 or 1)\n");
+ return -EINVAL;
+ }
+
+ if (new_setting)
+ control_reg |= DS2780_CONTROL_REG_PMOD;
+ else
+ control_reg &= ~DS2780_CONTROL_REG_PMOD;
+
+ ret = ds2780_set_control_register(dev_info, control_reg);
+ if (ret < 0)
+ return ret;
+
+ return count;
+}
+
+static ssize_t ds2780_get_sense_resistor_value(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ int ret;
+ u8 sense_resistor;
+ struct power_supply *psy = to_power_supply(dev);
+ struct ds2780_device_info *dev_info = to_ds2780_device_info(psy);
+
+ ret = ds2780_read8(dev_info, &sense_resistor, DS2780_RSNSP_REG);
+ if (ret < 0)
+ return ret;
+
+ ret = sprintf(buf, "%d\n", sense_resistor);
+ return ret;
+}
+
+static ssize_t ds2780_set_sense_resistor_value(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf,
+ size_t count)
+{
+ int ret;
+ u8 new_setting;
+ struct power_supply *psy = to_power_supply(dev);
+ struct ds2780_device_info *dev_info = to_ds2780_device_info(psy);
+
+ ret = kstrtou8(buf, 0, &new_setting);
+ if (ret < 0)
+ return ret;
+
+ ret = ds2780_set_sense_register(dev_info, new_setting);
+ if (ret < 0)
+ return ret;
+
+ return count;
+}
+
+static ssize_t ds2780_get_rsgain_setting(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ int ret;
+ u16 rsgain;
+ struct power_supply *psy = to_power_supply(dev);
+ struct ds2780_device_info *dev_info = to_ds2780_device_info(psy);
+
+ ret = ds2780_get_rsgain_register(dev_info, &rsgain);
+ if (ret < 0)
+ return ret;
+
+ return sprintf(buf, "%d\n", rsgain);
+}
+
+static ssize_t ds2780_set_rsgain_setting(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf,
+ size_t count)
+{
+ int ret;
+ u16 new_setting;
+ struct power_supply *psy = to_power_supply(dev);
+ struct ds2780_device_info *dev_info = to_ds2780_device_info(psy);
+
+ ret = kstrtou16(buf, 0, &new_setting);
+ if (ret < 0)
+ return ret;
+
+ /* Gain can only be from 0 to 1.999 in steps of .001 */
+ if (new_setting > 1999) {
+ dev_err(dev_info->dev, "Invalid rsgain setting (0 - 1999)\n");
+ return -EINVAL;
+ }
+
+ ret = ds2780_set_rsgain_register(dev_info, new_setting);
+ if (ret < 0)
+ return ret;
+
+ return count;
+}
+
+static ssize_t ds2780_get_pio_pin(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ int ret;
+ u8 sfr;
+ struct power_supply *psy = to_power_supply(dev);
+ struct ds2780_device_info *dev_info = to_ds2780_device_info(psy);
+
+ ret = ds2780_read8(dev_info, &sfr, DS2780_SFR_REG);
+ if (ret < 0)
+ return ret;
+
+ ret = sprintf(buf, "%d\n", sfr & DS2780_SFR_REG_PIOSC);
+ return ret;
+}
+
+static ssize_t ds2780_set_pio_pin(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf,
+ size_t count)
+{
+ int ret;
+ u8 new_setting;
+ struct power_supply *psy = to_power_supply(dev);
+ struct ds2780_device_info *dev_info = to_ds2780_device_info(psy);
+
+ ret = kstrtou8(buf, 0, &new_setting);
+ if (ret < 0)
+ return ret;
+
+ if ((new_setting != 0) && (new_setting != 1)) {
+ dev_err(dev_info->dev, "Invalid pio_pin setting (0 or 1)\n");
+ return -EINVAL;
+ }
+
+ ret = ds2780_write(dev_info, &new_setting,
+ DS2780_SFR_REG, sizeof(u8));
+ if (ret < 0)
+ return ret;
+
+ return count;
+}
+
+static ssize_t ds2780_read_param_eeprom_bin(struct file *filp,
+ struct kobject *kobj,
+ struct bin_attribute *bin_attr,
+ char *buf, loff_t off, size_t count)
+{
+ struct device *dev = container_of(kobj, struct device, kobj);
+ struct power_supply *psy = to_power_supply(dev);
+ struct ds2780_device_info *dev_info = to_ds2780_device_info(psy);
+
+ return ds2780_read_block(dev_info, buf,
+ DS2780_EEPROM_BLOCK1_START + off, count);
+}
+
+static ssize_t ds2780_write_param_eeprom_bin(struct file *filp,
+ struct kobject *kobj,
+ struct bin_attribute *bin_attr,
+ char *buf, loff_t off, size_t count)
+{
+ struct device *dev = container_of(kobj, struct device, kobj);
+ struct power_supply *psy = to_power_supply(dev);
+ struct ds2780_device_info *dev_info = to_ds2780_device_info(psy);
+ int ret;
+
+ ret = ds2780_write(dev_info, buf,
+ DS2780_EEPROM_BLOCK1_START + off, count);
+ if (ret < 0)
+ return ret;
+
+ ret = ds2780_save_eeprom(dev_info, DS2780_EEPROM_BLOCK1_START);
+ if (ret < 0)
+ return ret;
+
+ return count;
+}
+
+static struct bin_attribute ds2780_param_eeprom_bin_attr = {
+ .attr = {
+ .name = "param_eeprom",
+ .mode = S_IRUGO | S_IWUSR,
+ },
+ .size = DS2780_PARAM_EEPROM_SIZE,
+ .read = ds2780_read_param_eeprom_bin,
+ .write = ds2780_write_param_eeprom_bin,
+};
+
+static ssize_t ds2780_read_user_eeprom_bin(struct file *filp,
+ struct kobject *kobj,
+ struct bin_attribute *bin_attr,
+ char *buf, loff_t off, size_t count)
+{
+ struct device *dev = container_of(kobj, struct device, kobj);
+ struct power_supply *psy = to_power_supply(dev);
+ struct ds2780_device_info *dev_info = to_ds2780_device_info(psy);
+
+ return ds2780_read_block(dev_info, buf,
+ DS2780_EEPROM_BLOCK0_START + off, count);
+}
+
+static ssize_t ds2780_write_user_eeprom_bin(struct file *filp,
+ struct kobject *kobj,
+ struct bin_attribute *bin_attr,
+ char *buf, loff_t off, size_t count)
+{
+ struct device *dev = container_of(kobj, struct device, kobj);
+ struct power_supply *psy = to_power_supply(dev);
+ struct ds2780_device_info *dev_info = to_ds2780_device_info(psy);
+ int ret;
+
+ ret = ds2780_write(dev_info, buf,
+ DS2780_EEPROM_BLOCK0_START + off, count);
+ if (ret < 0)
+ return ret;
+
+ ret = ds2780_save_eeprom(dev_info, DS2780_EEPROM_BLOCK0_START);
+ if (ret < 0)
+ return ret;
+
+ return count;
+}
+
+static struct bin_attribute ds2780_user_eeprom_bin_attr = {
+ .attr = {
+ .name = "user_eeprom",
+ .mode = S_IRUGO | S_IWUSR,
+ },
+ .size = DS2780_USER_EEPROM_SIZE,
+ .read = ds2780_read_user_eeprom_bin,
+ .write = ds2780_write_user_eeprom_bin,
+};
+
+static DEVICE_ATTR(pmod_enabled, S_IRUGO | S_IWUSR, ds2780_get_pmod_enabled,
+ ds2780_set_pmod_enabled);
+static DEVICE_ATTR(sense_resistor_value, S_IRUGO | S_IWUSR,
+ ds2780_get_sense_resistor_value, ds2780_set_sense_resistor_value);
+static DEVICE_ATTR(rsgain_setting, S_IRUGO | S_IWUSR, ds2780_get_rsgain_setting,
+ ds2780_set_rsgain_setting);
+static DEVICE_ATTR(pio_pin, S_IRUGO | S_IWUSR, ds2780_get_pio_pin,
+ ds2780_set_pio_pin);
+
+static struct attribute *ds2780_sysfs_attrs[] = {
+ &dev_attr_pmod_enabled.attr,
+ &dev_attr_sense_resistor_value.attr,
+ &dev_attr_rsgain_setting.attr,
+ &dev_attr_pio_pin.attr,
+ NULL
+};
+
+static struct bin_attribute *ds2780_sysfs_bin_attrs[] = {
+ &ds2780_param_eeprom_bin_attr,
+ &ds2780_user_eeprom_bin_attr,
+ NULL
+};
+
+static const struct attribute_group ds2780_sysfs_group = {
+ .attrs = ds2780_sysfs_attrs,
+ .bin_attrs = ds2780_sysfs_bin_attrs,
+};
+
+static const struct attribute_group *ds2780_sysfs_groups[] = {
+ &ds2780_sysfs_group,
+ NULL,
+};
+
+static int ds2780_battery_probe(struct platform_device *pdev)
+{
+ struct power_supply_config psy_cfg = {};
+ struct ds2780_device_info *dev_info;
+
+ dev_info = devm_kzalloc(&pdev->dev, sizeof(*dev_info), GFP_KERNEL);
+ if (!dev_info)
+ return -ENOMEM;
+
+ platform_set_drvdata(pdev, dev_info);
+
+ dev_info->dev = &pdev->dev;
+ dev_info->w1_dev = pdev->dev.parent;
+ dev_info->bat_desc.name = dev_name(&pdev->dev);
+ dev_info->bat_desc.type = POWER_SUPPLY_TYPE_BATTERY;
+ dev_info->bat_desc.properties = ds2780_battery_props;
+ dev_info->bat_desc.num_properties = ARRAY_SIZE(ds2780_battery_props);
+ dev_info->bat_desc.get_property = ds2780_battery_get_property;
+
+ psy_cfg.drv_data = dev_info;
+ psy_cfg.attr_grp = ds2780_sysfs_groups;
+
+ dev_info->bat = devm_power_supply_register(&pdev->dev,
+ &dev_info->bat_desc,
+ &psy_cfg);
+ if (IS_ERR(dev_info->bat)) {
+ dev_err(dev_info->dev, "failed to register battery\n");
+ return PTR_ERR(dev_info->bat);
+ }
+
+ return 0;
+}
+
+static struct platform_driver ds2780_battery_driver = {
+ .driver = {
+ .name = "ds2780-battery",
+ },
+ .probe = ds2780_battery_probe,
+};
+
+module_platform_driver(ds2780_battery_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Clifton Barnes <cabarnes@indesign-llc.com>");
+MODULE_DESCRIPTION("Maxim/Dallas DS2780 Stand-Alone Fuel Gauge IC driver");
+MODULE_ALIAS("platform:ds2780-battery");
diff --git a/drivers/power/supply/ds2781_battery.c b/drivers/power/supply/ds2781_battery.c
new file mode 100644
index 000000000..3df3c820b
--- /dev/null
+++ b/drivers/power/supply/ds2781_battery.c
@@ -0,0 +1,794 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * 1-wire client/driver for the Maxim/Dallas DS2781 Stand-Alone Fuel Gauge IC
+ *
+ * Author: Renata Sayakhova <renata@oktetlabs.ru>
+ *
+ * Based on ds2780_battery drivers
+ */
+
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/param.h>
+#include <linux/pm.h>
+#include <linux/platform_device.h>
+#include <linux/power_supply.h>
+#include <linux/idr.h>
+
+#include <linux/w1.h>
+#include "../../w1/slaves/w1_ds2781.h"
+
+/* Current unit measurement in uA for a 1 milli-ohm sense resistor */
+#define DS2781_CURRENT_UNITS 1563
+/* Charge unit measurement in uAh for a 1 milli-ohm sense resistor */
+#define DS2781_CHARGE_UNITS 6250
+/* Number of bytes in user EEPROM space */
+#define DS2781_USER_EEPROM_SIZE (DS2781_EEPROM_BLOCK0_END - \
+ DS2781_EEPROM_BLOCK0_START + 1)
+/* Number of bytes in parameter EEPROM space */
+#define DS2781_PARAM_EEPROM_SIZE (DS2781_EEPROM_BLOCK1_END - \
+ DS2781_EEPROM_BLOCK1_START + 1)
+
+struct ds2781_device_info {
+ struct device *dev;
+ struct power_supply *bat;
+ struct power_supply_desc bat_desc;
+ struct device *w1_dev;
+};
+
+enum current_types {
+ CURRENT_NOW,
+ CURRENT_AVG,
+};
+
+static const char model[] = "DS2781";
+static const char manufacturer[] = "Maxim/Dallas";
+
+static inline struct ds2781_device_info *
+to_ds2781_device_info(struct power_supply *psy)
+{
+ return power_supply_get_drvdata(psy);
+}
+
+static inline int ds2781_battery_io(struct ds2781_device_info *dev_info,
+ char *buf, int addr, size_t count, int io)
+{
+ return w1_ds2781_io(dev_info->w1_dev, buf, addr, count, io);
+}
+
+static int w1_ds2781_read(struct ds2781_device_info *dev_info, char *buf,
+ int addr, size_t count)
+{
+ return ds2781_battery_io(dev_info, buf, addr, count, 0);
+}
+
+static inline int ds2781_read8(struct ds2781_device_info *dev_info, u8 *val,
+ int addr)
+{
+ return ds2781_battery_io(dev_info, val, addr, sizeof(u8), 0);
+}
+
+static int ds2781_read16(struct ds2781_device_info *dev_info, s16 *val,
+ int addr)
+{
+ int ret;
+ u8 raw[2];
+
+ ret = ds2781_battery_io(dev_info, raw, addr, sizeof(raw), 0);
+ if (ret < 0)
+ return ret;
+
+ *val = (raw[0] << 8) | raw[1];
+
+ return 0;
+}
+
+static inline int ds2781_read_block(struct ds2781_device_info *dev_info,
+ u8 *val, int addr, size_t count)
+{
+ return ds2781_battery_io(dev_info, val, addr, count, 0);
+}
+
+static inline int ds2781_write(struct ds2781_device_info *dev_info, u8 *val,
+ int addr, size_t count)
+{
+ return ds2781_battery_io(dev_info, val, addr, count, 1);
+}
+
+static inline int ds2781_store_eeprom(struct device *dev, int addr)
+{
+ return w1_ds2781_eeprom_cmd(dev, addr, W1_DS2781_COPY_DATA);
+}
+
+static inline int ds2781_recall_eeprom(struct device *dev, int addr)
+{
+ return w1_ds2781_eeprom_cmd(dev, addr, W1_DS2781_RECALL_DATA);
+}
+
+static int ds2781_save_eeprom(struct ds2781_device_info *dev_info, int reg)
+{
+ int ret;
+
+ ret = ds2781_store_eeprom(dev_info->w1_dev, reg);
+ if (ret < 0)
+ return ret;
+
+ ret = ds2781_recall_eeprom(dev_info->w1_dev, reg);
+ if (ret < 0)
+ return ret;
+
+ return 0;
+}
+
+/* Set sense resistor value in mhos */
+static int ds2781_set_sense_register(struct ds2781_device_info *dev_info,
+ u8 conductance)
+{
+ int ret;
+
+ ret = ds2781_write(dev_info, &conductance,
+ DS2781_RSNSP, sizeof(u8));
+ if (ret < 0)
+ return ret;
+
+ return ds2781_save_eeprom(dev_info, DS2781_RSNSP);
+}
+
+/* Get RSGAIN value from 0 to 1.999 in steps of 0.001 */
+static int ds2781_get_rsgain_register(struct ds2781_device_info *dev_info,
+ u16 *rsgain)
+{
+ return ds2781_read16(dev_info, rsgain, DS2781_RSGAIN_MSB);
+}
+
+/* Set RSGAIN value from 0 to 1.999 in steps of 0.001 */
+static int ds2781_set_rsgain_register(struct ds2781_device_info *dev_info,
+ u16 rsgain)
+{
+ int ret;
+ u8 raw[] = {rsgain >> 8, rsgain & 0xFF};
+
+ ret = ds2781_write(dev_info, raw,
+ DS2781_RSGAIN_MSB, sizeof(raw));
+ if (ret < 0)
+ return ret;
+
+ return ds2781_save_eeprom(dev_info, DS2781_RSGAIN_MSB);
+}
+
+static int ds2781_get_voltage(struct ds2781_device_info *dev_info,
+ int *voltage_uV)
+{
+ int ret;
+ char val[2];
+ int voltage_raw;
+
+ ret = w1_ds2781_read(dev_info, val, DS2781_VOLT_MSB, 2 * sizeof(u8));
+ if (ret < 0)
+ return ret;
+ /*
+ * The voltage value is located in 10 bits across the voltage MSB
+ * and LSB registers in two's complement form
+ * Sign bit of the voltage value is in bit 7 of the voltage MSB register
+ * Bits 9 - 3 of the voltage value are in bits 6 - 0 of the
+ * voltage MSB register
+ * Bits 2 - 0 of the voltage value are in bits 7 - 5 of the
+ * voltage LSB register
+ */
+ voltage_raw = (val[0] << 3) |
+ (val[1] >> 5);
+
+ /* DS2781 reports voltage in units of 9.76mV, but the battery class
+ * reports in units of uV, so convert by multiplying by 9760. */
+ *voltage_uV = voltage_raw * 9760;
+
+ return 0;
+}
+
+static int ds2781_get_temperature(struct ds2781_device_info *dev_info,
+ int *temp)
+{
+ int ret;
+ char val[2];
+ int temp_raw;
+
+ ret = w1_ds2781_read(dev_info, val, DS2781_TEMP_MSB, 2 * sizeof(u8));
+ if (ret < 0)
+ return ret;
+ /*
+ * The temperature value is located in 10 bits across the temperature
+ * MSB and LSB registers in two's complement form
+ * Sign bit of the temperature value is in bit 7 of the temperature
+ * MSB register
+ * Bits 9 - 3 of the temperature value are in bits 6 - 0 of the
+ * temperature MSB register
+ * Bits 2 - 0 of the temperature value are in bits 7 - 5 of the
+ * temperature LSB register
+ */
+ temp_raw = ((val[0]) << 3) |
+ (val[1] >> 5);
+ *temp = temp_raw + (temp_raw / 4);
+
+ return 0;
+}
+
+static int ds2781_get_current(struct ds2781_device_info *dev_info,
+ enum current_types type, int *current_uA)
+{
+ int ret, sense_res;
+ s16 current_raw;
+ u8 sense_res_raw, reg_msb;
+
+ /*
+ * The units of measurement for current are dependent on the value of
+ * the sense resistor.
+ */
+ ret = ds2781_read8(dev_info, &sense_res_raw, DS2781_RSNSP);
+ if (ret < 0)
+ return ret;
+
+ if (sense_res_raw == 0) {
+ dev_err(dev_info->dev, "sense resistor value is 0\n");
+ return -EINVAL;
+ }
+ sense_res = 1000 / sense_res_raw;
+
+ if (type == CURRENT_NOW)
+ reg_msb = DS2781_CURRENT_MSB;
+ else if (type == CURRENT_AVG)
+ reg_msb = DS2781_IAVG_MSB;
+ else
+ return -EINVAL;
+
+ /*
+ * The current value is located in 16 bits across the current MSB
+ * and LSB registers in two's complement form
+ * Sign bit of the current value is in bit 7 of the current MSB register
+ * Bits 14 - 8 of the current value are in bits 6 - 0 of the current
+ * MSB register
+ * Bits 7 - 0 of the current value are in bits 7 - 0 of the current
+ * LSB register
+ */
+ ret = ds2781_read16(dev_info, &current_raw, reg_msb);
+ if (ret < 0)
+ return ret;
+
+ *current_uA = current_raw * (DS2781_CURRENT_UNITS / sense_res);
+ return 0;
+}
+
+static int ds2781_get_accumulated_current(struct ds2781_device_info *dev_info,
+ int *accumulated_current)
+{
+ int ret, sense_res;
+ s16 current_raw;
+ u8 sense_res_raw;
+
+ /*
+ * The units of measurement for accumulated current are dependent on
+ * the value of the sense resistor.
+ */
+ ret = ds2781_read8(dev_info, &sense_res_raw, DS2781_RSNSP);
+ if (ret < 0)
+ return ret;
+
+ if (sense_res_raw == 0) {
+ dev_err(dev_info->dev, "sense resistor value is 0\n");
+ return -EINVAL;
+ }
+ sense_res = 1000 / sense_res_raw;
+
+ /*
+ * The ACR value is located in 16 bits across the ACR MSB and
+ * LSB registers
+ * Bits 15 - 8 of the ACR value are in bits 7 - 0 of the ACR
+ * MSB register
+ * Bits 7 - 0 of the ACR value are in bits 7 - 0 of the ACR
+ * LSB register
+ */
+ ret = ds2781_read16(dev_info, &current_raw, DS2781_ACR_MSB);
+ if (ret < 0)
+ return ret;
+
+ *accumulated_current = current_raw * (DS2781_CHARGE_UNITS / sense_res);
+ return 0;
+}
+
+static int ds2781_get_capacity(struct ds2781_device_info *dev_info,
+ int *capacity)
+{
+ int ret;
+ u8 raw;
+
+ ret = ds2781_read8(dev_info, &raw, DS2781_RARC);
+ if (ret < 0)
+ return ret;
+
+ *capacity = raw;
+ return 0;
+}
+
+static int ds2781_get_status(struct ds2781_device_info *dev_info, int *status)
+{
+ int ret, current_uA, capacity;
+
+ ret = ds2781_get_current(dev_info, CURRENT_NOW, &current_uA);
+ if (ret < 0)
+ return ret;
+
+ ret = ds2781_get_capacity(dev_info, &capacity);
+ if (ret < 0)
+ return ret;
+
+ if (power_supply_am_i_supplied(dev_info->bat)) {
+ if (capacity == 100)
+ *status = POWER_SUPPLY_STATUS_FULL;
+ else if (current_uA > 50000)
+ *status = POWER_SUPPLY_STATUS_CHARGING;
+ else
+ *status = POWER_SUPPLY_STATUS_NOT_CHARGING;
+ } else {
+ *status = POWER_SUPPLY_STATUS_DISCHARGING;
+ }
+ return 0;
+}
+
+static int ds2781_get_charge_now(struct ds2781_device_info *dev_info,
+ int *charge_now)
+{
+ int ret;
+ u16 charge_raw;
+
+ /*
+ * The RAAC value is located in 16 bits across the RAAC MSB and
+ * LSB registers
+ * Bits 15 - 8 of the RAAC value are in bits 7 - 0 of the RAAC
+ * MSB register
+ * Bits 7 - 0 of the RAAC value are in bits 7 - 0 of the RAAC
+ * LSB register
+ */
+ ret = ds2781_read16(dev_info, &charge_raw, DS2781_RAAC_MSB);
+ if (ret < 0)
+ return ret;
+
+ *charge_now = charge_raw * 1600;
+ return 0;
+}
+
+static int ds2781_get_control_register(struct ds2781_device_info *dev_info,
+ u8 *control_reg)
+{
+ return ds2781_read8(dev_info, control_reg, DS2781_CONTROL);
+}
+
+static int ds2781_set_control_register(struct ds2781_device_info *dev_info,
+ u8 control_reg)
+{
+ int ret;
+
+ ret = ds2781_write(dev_info, &control_reg,
+ DS2781_CONTROL, sizeof(u8));
+ if (ret < 0)
+ return ret;
+
+ return ds2781_save_eeprom(dev_info, DS2781_CONTROL);
+}
+
+static int ds2781_battery_get_property(struct power_supply *psy,
+ enum power_supply_property psp,
+ union power_supply_propval *val)
+{
+ int ret = 0;
+ struct ds2781_device_info *dev_info = to_ds2781_device_info(psy);
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+ ret = ds2781_get_voltage(dev_info, &val->intval);
+ break;
+
+ case POWER_SUPPLY_PROP_TEMP:
+ ret = ds2781_get_temperature(dev_info, &val->intval);
+ break;
+
+ case POWER_SUPPLY_PROP_MODEL_NAME:
+ val->strval = model;
+ break;
+
+ case POWER_SUPPLY_PROP_MANUFACTURER:
+ val->strval = manufacturer;
+ break;
+
+ case POWER_SUPPLY_PROP_CURRENT_NOW:
+ ret = ds2781_get_current(dev_info, CURRENT_NOW, &val->intval);
+ break;
+
+ case POWER_SUPPLY_PROP_CURRENT_AVG:
+ ret = ds2781_get_current(dev_info, CURRENT_AVG, &val->intval);
+ break;
+
+ case POWER_SUPPLY_PROP_STATUS:
+ ret = ds2781_get_status(dev_info, &val->intval);
+ break;
+
+ case POWER_SUPPLY_PROP_CAPACITY:
+ ret = ds2781_get_capacity(dev_info, &val->intval);
+ break;
+
+ case POWER_SUPPLY_PROP_CHARGE_COUNTER:
+ ret = ds2781_get_accumulated_current(dev_info, &val->intval);
+ break;
+
+ case POWER_SUPPLY_PROP_CHARGE_NOW:
+ ret = ds2781_get_charge_now(dev_info, &val->intval);
+ break;
+
+ default:
+ ret = -EINVAL;
+ }
+
+ return ret;
+}
+
+static enum power_supply_property ds2781_battery_props[] = {
+ POWER_SUPPLY_PROP_STATUS,
+ POWER_SUPPLY_PROP_VOLTAGE_NOW,
+ POWER_SUPPLY_PROP_TEMP,
+ POWER_SUPPLY_PROP_MODEL_NAME,
+ POWER_SUPPLY_PROP_MANUFACTURER,
+ POWER_SUPPLY_PROP_CURRENT_NOW,
+ POWER_SUPPLY_PROP_CURRENT_AVG,
+ POWER_SUPPLY_PROP_CAPACITY,
+ POWER_SUPPLY_PROP_CHARGE_COUNTER,
+ POWER_SUPPLY_PROP_CHARGE_NOW,
+};
+
+static ssize_t ds2781_get_pmod_enabled(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ int ret;
+ u8 control_reg;
+ struct power_supply *psy = to_power_supply(dev);
+ struct ds2781_device_info *dev_info = to_ds2781_device_info(psy);
+
+ /* Get power mode */
+ ret = ds2781_get_control_register(dev_info, &control_reg);
+ if (ret < 0)
+ return ret;
+
+ return sprintf(buf, "%d\n",
+ !!(control_reg & DS2781_CONTROL_PMOD));
+}
+
+static ssize_t ds2781_set_pmod_enabled(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf,
+ size_t count)
+{
+ int ret;
+ u8 control_reg, new_setting;
+ struct power_supply *psy = to_power_supply(dev);
+ struct ds2781_device_info *dev_info = to_ds2781_device_info(psy);
+
+ /* Set power mode */
+ ret = ds2781_get_control_register(dev_info, &control_reg);
+ if (ret < 0)
+ return ret;
+
+ ret = kstrtou8(buf, 0, &new_setting);
+ if (ret < 0)
+ return ret;
+
+ if ((new_setting != 0) && (new_setting != 1)) {
+ dev_err(dev_info->dev, "Invalid pmod setting (0 or 1)\n");
+ return -EINVAL;
+ }
+
+ if (new_setting)
+ control_reg |= DS2781_CONTROL_PMOD;
+ else
+ control_reg &= ~DS2781_CONTROL_PMOD;
+
+ ret = ds2781_set_control_register(dev_info, control_reg);
+ if (ret < 0)
+ return ret;
+
+ return count;
+}
+
+static ssize_t ds2781_get_sense_resistor_value(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ int ret;
+ u8 sense_resistor;
+ struct power_supply *psy = to_power_supply(dev);
+ struct ds2781_device_info *dev_info = to_ds2781_device_info(psy);
+
+ ret = ds2781_read8(dev_info, &sense_resistor, DS2781_RSNSP);
+ if (ret < 0)
+ return ret;
+
+ ret = sprintf(buf, "%d\n", sense_resistor);
+ return ret;
+}
+
+static ssize_t ds2781_set_sense_resistor_value(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf,
+ size_t count)
+{
+ int ret;
+ u8 new_setting;
+ struct power_supply *psy = to_power_supply(dev);
+ struct ds2781_device_info *dev_info = to_ds2781_device_info(psy);
+
+ ret = kstrtou8(buf, 0, &new_setting);
+ if (ret < 0)
+ return ret;
+
+ ret = ds2781_set_sense_register(dev_info, new_setting);
+ if (ret < 0)
+ return ret;
+
+ return count;
+}
+
+static ssize_t ds2781_get_rsgain_setting(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ int ret;
+ u16 rsgain;
+ struct power_supply *psy = to_power_supply(dev);
+ struct ds2781_device_info *dev_info = to_ds2781_device_info(psy);
+
+ ret = ds2781_get_rsgain_register(dev_info, &rsgain);
+ if (ret < 0)
+ return ret;
+
+ return sprintf(buf, "%d\n", rsgain);
+}
+
+static ssize_t ds2781_set_rsgain_setting(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf,
+ size_t count)
+{
+ int ret;
+ u16 new_setting;
+ struct power_supply *psy = to_power_supply(dev);
+ struct ds2781_device_info *dev_info = to_ds2781_device_info(psy);
+
+ ret = kstrtou16(buf, 0, &new_setting);
+ if (ret < 0)
+ return ret;
+
+ /* Gain can only be from 0 to 1.999 in steps of .001 */
+ if (new_setting > 1999) {
+ dev_err(dev_info->dev, "Invalid rsgain setting (0 - 1999)\n");
+ return -EINVAL;
+ }
+
+ ret = ds2781_set_rsgain_register(dev_info, new_setting);
+ if (ret < 0)
+ return ret;
+
+ return count;
+}
+
+static ssize_t ds2781_get_pio_pin(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ int ret;
+ u8 sfr;
+ struct power_supply *psy = to_power_supply(dev);
+ struct ds2781_device_info *dev_info = to_ds2781_device_info(psy);
+
+ ret = ds2781_read8(dev_info, &sfr, DS2781_SFR);
+ if (ret < 0)
+ return ret;
+
+ ret = sprintf(buf, "%d\n", sfr & DS2781_SFR_PIOSC);
+ return ret;
+}
+
+static ssize_t ds2781_set_pio_pin(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf,
+ size_t count)
+{
+ int ret;
+ u8 new_setting;
+ struct power_supply *psy = to_power_supply(dev);
+ struct ds2781_device_info *dev_info = to_ds2781_device_info(psy);
+
+ ret = kstrtou8(buf, 0, &new_setting);
+ if (ret < 0)
+ return ret;
+
+ if ((new_setting != 0) && (new_setting != 1)) {
+ dev_err(dev_info->dev, "Invalid pio_pin setting (0 or 1)\n");
+ return -EINVAL;
+ }
+
+ ret = ds2781_write(dev_info, &new_setting,
+ DS2781_SFR, sizeof(u8));
+ if (ret < 0)
+ return ret;
+
+ return count;
+}
+
+static ssize_t ds2781_read_param_eeprom_bin(struct file *filp,
+ struct kobject *kobj,
+ struct bin_attribute *bin_attr,
+ char *buf, loff_t off, size_t count)
+{
+ struct device *dev = container_of(kobj, struct device, kobj);
+ struct power_supply *psy = to_power_supply(dev);
+ struct ds2781_device_info *dev_info = to_ds2781_device_info(psy);
+
+ return ds2781_read_block(dev_info, buf,
+ DS2781_EEPROM_BLOCK1_START + off, count);
+}
+
+static ssize_t ds2781_write_param_eeprom_bin(struct file *filp,
+ struct kobject *kobj,
+ struct bin_attribute *bin_attr,
+ char *buf, loff_t off, size_t count)
+{
+ struct device *dev = container_of(kobj, struct device, kobj);
+ struct power_supply *psy = to_power_supply(dev);
+ struct ds2781_device_info *dev_info = to_ds2781_device_info(psy);
+ int ret;
+
+ ret = ds2781_write(dev_info, buf,
+ DS2781_EEPROM_BLOCK1_START + off, count);
+ if (ret < 0)
+ return ret;
+
+ ret = ds2781_save_eeprom(dev_info, DS2781_EEPROM_BLOCK1_START);
+ if (ret < 0)
+ return ret;
+
+ return count;
+}
+
+static struct bin_attribute ds2781_param_eeprom_bin_attr = {
+ .attr = {
+ .name = "param_eeprom",
+ .mode = S_IRUGO | S_IWUSR,
+ },
+ .size = DS2781_PARAM_EEPROM_SIZE,
+ .read = ds2781_read_param_eeprom_bin,
+ .write = ds2781_write_param_eeprom_bin,
+};
+
+static ssize_t ds2781_read_user_eeprom_bin(struct file *filp,
+ struct kobject *kobj,
+ struct bin_attribute *bin_attr,
+ char *buf, loff_t off, size_t count)
+{
+ struct device *dev = container_of(kobj, struct device, kobj);
+ struct power_supply *psy = to_power_supply(dev);
+ struct ds2781_device_info *dev_info = to_ds2781_device_info(psy);
+
+ return ds2781_read_block(dev_info, buf,
+ DS2781_EEPROM_BLOCK0_START + off, count);
+
+}
+
+static ssize_t ds2781_write_user_eeprom_bin(struct file *filp,
+ struct kobject *kobj,
+ struct bin_attribute *bin_attr,
+ char *buf, loff_t off, size_t count)
+{
+ struct device *dev = container_of(kobj, struct device, kobj);
+ struct power_supply *psy = to_power_supply(dev);
+ struct ds2781_device_info *dev_info = to_ds2781_device_info(psy);
+ int ret;
+
+ ret = ds2781_write(dev_info, buf,
+ DS2781_EEPROM_BLOCK0_START + off, count);
+ if (ret < 0)
+ return ret;
+
+ ret = ds2781_save_eeprom(dev_info, DS2781_EEPROM_BLOCK0_START);
+ if (ret < 0)
+ return ret;
+
+ return count;
+}
+
+static struct bin_attribute ds2781_user_eeprom_bin_attr = {
+ .attr = {
+ .name = "user_eeprom",
+ .mode = S_IRUGO | S_IWUSR,
+ },
+ .size = DS2781_USER_EEPROM_SIZE,
+ .read = ds2781_read_user_eeprom_bin,
+ .write = ds2781_write_user_eeprom_bin,
+};
+
+static DEVICE_ATTR(pmod_enabled, S_IRUGO | S_IWUSR, ds2781_get_pmod_enabled,
+ ds2781_set_pmod_enabled);
+static DEVICE_ATTR(sense_resistor_value, S_IRUGO | S_IWUSR,
+ ds2781_get_sense_resistor_value, ds2781_set_sense_resistor_value);
+static DEVICE_ATTR(rsgain_setting, S_IRUGO | S_IWUSR, ds2781_get_rsgain_setting,
+ ds2781_set_rsgain_setting);
+static DEVICE_ATTR(pio_pin, S_IRUGO | S_IWUSR, ds2781_get_pio_pin,
+ ds2781_set_pio_pin);
+
+static struct attribute *ds2781_sysfs_attrs[] = {
+ &dev_attr_pmod_enabled.attr,
+ &dev_attr_sense_resistor_value.attr,
+ &dev_attr_rsgain_setting.attr,
+ &dev_attr_pio_pin.attr,
+ NULL
+};
+
+static struct bin_attribute *ds2781_sysfs_bin_attrs[] = {
+ &ds2781_param_eeprom_bin_attr,
+ &ds2781_user_eeprom_bin_attr,
+ NULL,
+};
+
+static const struct attribute_group ds2781_sysfs_group = {
+ .attrs = ds2781_sysfs_attrs,
+ .bin_attrs = ds2781_sysfs_bin_attrs,
+
+};
+
+static const struct attribute_group *ds2781_sysfs_groups[] = {
+ &ds2781_sysfs_group,
+ NULL,
+};
+
+static int ds2781_battery_probe(struct platform_device *pdev)
+{
+ struct power_supply_config psy_cfg = {};
+ struct ds2781_device_info *dev_info;
+
+ dev_info = devm_kzalloc(&pdev->dev, sizeof(*dev_info), GFP_KERNEL);
+ if (!dev_info)
+ return -ENOMEM;
+
+ platform_set_drvdata(pdev, dev_info);
+
+ dev_info->dev = &pdev->dev;
+ dev_info->w1_dev = pdev->dev.parent;
+ dev_info->bat_desc.name = dev_name(&pdev->dev);
+ dev_info->bat_desc.type = POWER_SUPPLY_TYPE_BATTERY;
+ dev_info->bat_desc.properties = ds2781_battery_props;
+ dev_info->bat_desc.num_properties = ARRAY_SIZE(ds2781_battery_props);
+ dev_info->bat_desc.get_property = ds2781_battery_get_property;
+
+ psy_cfg.drv_data = dev_info;
+ psy_cfg.attr_grp = ds2781_sysfs_groups;
+
+ dev_info->bat = devm_power_supply_register(&pdev->dev,
+ &dev_info->bat_desc,
+ &psy_cfg);
+ if (IS_ERR(dev_info->bat)) {
+ dev_err(dev_info->dev, "failed to register battery\n");
+ return PTR_ERR(dev_info->bat);
+ }
+
+ return 0;
+}
+
+static struct platform_driver ds2781_battery_driver = {
+ .driver = {
+ .name = "ds2781-battery",
+ },
+ .probe = ds2781_battery_probe,
+};
+module_platform_driver(ds2781_battery_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Renata Sayakhova <renata@oktetlabs.ru>");
+MODULE_DESCRIPTION("Maxim/Dallas DS2781 Stand-Alone Fuel Gauge IC driver");
+MODULE_ALIAS("platform:ds2781-battery");
+
diff --git a/drivers/power/supply/ds2782_battery.c b/drivers/power/supply/ds2782_battery.c
new file mode 100644
index 000000000..9ae273fde
--- /dev/null
+++ b/drivers/power/supply/ds2782_battery.c
@@ -0,0 +1,471 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * I2C client/driver for the Maxim/Dallas DS2782 Stand-Alone Fuel Gauge IC
+ *
+ * Copyright (C) 2009 Bluewater Systems Ltd
+ *
+ * Author: Ryan Mallon
+ *
+ * DS2786 added by Yulia Vilensky <vilensky@compulab.co.il>
+ *
+ * UEvent sending added by Evgeny Romanov <romanov@neurosoft.ru>
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/swab.h>
+#include <linux/i2c.h>
+#include <linux/delay.h>
+#include <linux/idr.h>
+#include <linux/power_supply.h>
+#include <linux/slab.h>
+#include <linux/ds2782_battery.h>
+
+#define DS2782_REG_RARC 0x06 /* Remaining active relative capacity */
+
+#define DS278x_REG_VOLT_MSB 0x0c
+#define DS278x_REG_TEMP_MSB 0x0a
+#define DS278x_REG_CURRENT_MSB 0x0e
+
+/* EEPROM Block */
+#define DS2782_REG_RSNSP 0x69 /* Sense resistor value */
+
+/* Current unit measurement in uA for a 1 milli-ohm sense resistor */
+#define DS2782_CURRENT_UNITS 1563
+
+#define DS2786_REG_RARC 0x02 /* Remaining active relative capacity */
+
+#define DS2786_CURRENT_UNITS 25
+
+#define DS278x_DELAY 1000
+
+struct ds278x_info;
+
+struct ds278x_battery_ops {
+ int (*get_battery_current)(struct ds278x_info *info, int *current_uA);
+ int (*get_battery_voltage)(struct ds278x_info *info, int *voltage_uV);
+ int (*get_battery_capacity)(struct ds278x_info *info, int *capacity);
+};
+
+#define to_ds278x_info(x) power_supply_get_drvdata(x)
+
+struct ds278x_info {
+ struct i2c_client *client;
+ struct power_supply *battery;
+ struct power_supply_desc battery_desc;
+ const struct ds278x_battery_ops *ops;
+ struct delayed_work bat_work;
+ int id;
+ int rsns;
+ int capacity;
+ int status; /* State Of Charge */
+};
+
+static DEFINE_IDR(battery_id);
+static DEFINE_MUTEX(battery_lock);
+
+static inline int ds278x_read_reg(struct ds278x_info *info, int reg, u8 *val)
+{
+ int ret;
+
+ ret = i2c_smbus_read_byte_data(info->client, reg);
+ if (ret < 0) {
+ dev_err(&info->client->dev, "register read failed\n");
+ return ret;
+ }
+
+ *val = ret;
+ return 0;
+}
+
+static inline int ds278x_read_reg16(struct ds278x_info *info, int reg_msb,
+ s16 *val)
+{
+ int ret;
+
+ ret = i2c_smbus_read_word_data(info->client, reg_msb);
+ if (ret < 0) {
+ dev_err(&info->client->dev, "register read failed\n");
+ return ret;
+ }
+
+ *val = swab16(ret);
+ return 0;
+}
+
+static int ds278x_get_temp(struct ds278x_info *info, int *temp)
+{
+ s16 raw;
+ int err;
+
+ /*
+ * Temperature is measured in units of 0.125 degrees celcius, the
+ * power_supply class measures temperature in tenths of degrees
+ * celsius. The temperature value is stored as a 10 bit number, plus
+ * sign in the upper bits of a 16 bit register.
+ */
+ err = ds278x_read_reg16(info, DS278x_REG_TEMP_MSB, &raw);
+ if (err)
+ return err;
+ *temp = ((raw / 32) * 125) / 100;
+ return 0;
+}
+
+static int ds2782_get_current(struct ds278x_info *info, int *current_uA)
+{
+ int sense_res;
+ int err;
+ u8 sense_res_raw;
+ s16 raw;
+
+ /*
+ * The units of measurement for current are dependent on the value of
+ * the sense resistor.
+ */
+ err = ds278x_read_reg(info, DS2782_REG_RSNSP, &sense_res_raw);
+ if (err)
+ return err;
+ if (sense_res_raw == 0) {
+ dev_err(&info->client->dev, "sense resistor value is 0\n");
+ return -ENXIO;
+ }
+ sense_res = 1000 / sense_res_raw;
+
+ dev_dbg(&info->client->dev, "sense resistor = %d milli-ohms\n",
+ sense_res);
+ err = ds278x_read_reg16(info, DS278x_REG_CURRENT_MSB, &raw);
+ if (err)
+ return err;
+ *current_uA = raw * (DS2782_CURRENT_UNITS / sense_res);
+ return 0;
+}
+
+static int ds2782_get_voltage(struct ds278x_info *info, int *voltage_uV)
+{
+ s16 raw;
+ int err;
+
+ /*
+ * Voltage is measured in units of 4.88mV. The voltage is stored as
+ * a 10-bit number plus sign, in the upper bits of a 16-bit register
+ */
+ err = ds278x_read_reg16(info, DS278x_REG_VOLT_MSB, &raw);
+ if (err)
+ return err;
+ *voltage_uV = (raw / 32) * 4800;
+ return 0;
+}
+
+static int ds2782_get_capacity(struct ds278x_info *info, int *capacity)
+{
+ int err;
+ u8 raw;
+
+ err = ds278x_read_reg(info, DS2782_REG_RARC, &raw);
+ if (err)
+ return err;
+ *capacity = raw;
+ return 0;
+}
+
+static int ds2786_get_current(struct ds278x_info *info, int *current_uA)
+{
+ int err;
+ s16 raw;
+
+ err = ds278x_read_reg16(info, DS278x_REG_CURRENT_MSB, &raw);
+ if (err)
+ return err;
+ *current_uA = (raw / 16) * (DS2786_CURRENT_UNITS / info->rsns);
+ return 0;
+}
+
+static int ds2786_get_voltage(struct ds278x_info *info, int *voltage_uV)
+{
+ s16 raw;
+ int err;
+
+ /*
+ * Voltage is measured in units of 1.22mV. The voltage is stored as
+ * a 12-bit number plus sign, in the upper bits of a 16-bit register
+ */
+ err = ds278x_read_reg16(info, DS278x_REG_VOLT_MSB, &raw);
+ if (err)
+ return err;
+ *voltage_uV = (raw / 8) * 1220;
+ return 0;
+}
+
+static int ds2786_get_capacity(struct ds278x_info *info, int *capacity)
+{
+ int err;
+ u8 raw;
+
+ err = ds278x_read_reg(info, DS2786_REG_RARC, &raw);
+ if (err)
+ return err;
+ /* Relative capacity is displayed with resolution 0.5 % */
+ *capacity = raw/2 ;
+ return 0;
+}
+
+static int ds278x_get_status(struct ds278x_info *info, int *status)
+{
+ int err;
+ int current_uA;
+ int capacity;
+
+ err = info->ops->get_battery_current(info, &current_uA);
+ if (err)
+ return err;
+
+ err = info->ops->get_battery_capacity(info, &capacity);
+ if (err)
+ return err;
+
+ info->capacity = capacity;
+
+ if (capacity == 100)
+ *status = POWER_SUPPLY_STATUS_FULL;
+ else if (current_uA == 0)
+ *status = POWER_SUPPLY_STATUS_NOT_CHARGING;
+ else if (current_uA < 0)
+ *status = POWER_SUPPLY_STATUS_DISCHARGING;
+ else
+ *status = POWER_SUPPLY_STATUS_CHARGING;
+
+ return 0;
+}
+
+static int ds278x_battery_get_property(struct power_supply *psy,
+ enum power_supply_property prop,
+ union power_supply_propval *val)
+{
+ struct ds278x_info *info = to_ds278x_info(psy);
+ int ret;
+
+ switch (prop) {
+ case POWER_SUPPLY_PROP_STATUS:
+ ret = ds278x_get_status(info, &val->intval);
+ break;
+
+ case POWER_SUPPLY_PROP_CAPACITY:
+ ret = info->ops->get_battery_capacity(info, &val->intval);
+ break;
+
+ case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+ ret = info->ops->get_battery_voltage(info, &val->intval);
+ break;
+
+ case POWER_SUPPLY_PROP_CURRENT_NOW:
+ ret = info->ops->get_battery_current(info, &val->intval);
+ break;
+
+ case POWER_SUPPLY_PROP_TEMP:
+ ret = ds278x_get_temp(info, &val->intval);
+ break;
+
+ default:
+ ret = -EINVAL;
+ }
+
+ return ret;
+}
+
+static void ds278x_bat_update(struct ds278x_info *info)
+{
+ int old_status = info->status;
+ int old_capacity = info->capacity;
+
+ ds278x_get_status(info, &info->status);
+
+ if ((old_status != info->status) || (old_capacity != info->capacity))
+ power_supply_changed(info->battery);
+}
+
+static void ds278x_bat_work(struct work_struct *work)
+{
+ struct ds278x_info *info;
+
+ info = container_of(work, struct ds278x_info, bat_work.work);
+ ds278x_bat_update(info);
+
+ schedule_delayed_work(&info->bat_work, DS278x_DELAY);
+}
+
+static enum power_supply_property ds278x_battery_props[] = {
+ POWER_SUPPLY_PROP_STATUS,
+ POWER_SUPPLY_PROP_CAPACITY,
+ POWER_SUPPLY_PROP_VOLTAGE_NOW,
+ POWER_SUPPLY_PROP_CURRENT_NOW,
+ POWER_SUPPLY_PROP_TEMP,
+};
+
+static void ds278x_power_supply_init(struct power_supply_desc *battery)
+{
+ battery->type = POWER_SUPPLY_TYPE_BATTERY;
+ battery->properties = ds278x_battery_props;
+ battery->num_properties = ARRAY_SIZE(ds278x_battery_props);
+ battery->get_property = ds278x_battery_get_property;
+ battery->external_power_changed = NULL;
+}
+
+static int ds278x_battery_remove(struct i2c_client *client)
+{
+ struct ds278x_info *info = i2c_get_clientdata(client);
+ int id = info->id;
+
+ power_supply_unregister(info->battery);
+ cancel_delayed_work_sync(&info->bat_work);
+ kfree(info->battery_desc.name);
+ kfree(info);
+
+ mutex_lock(&battery_lock);
+ idr_remove(&battery_id, id);
+ mutex_unlock(&battery_lock);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+
+static int ds278x_suspend(struct device *dev)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct ds278x_info *info = i2c_get_clientdata(client);
+
+ cancel_delayed_work(&info->bat_work);
+ return 0;
+}
+
+static int ds278x_resume(struct device *dev)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct ds278x_info *info = i2c_get_clientdata(client);
+
+ schedule_delayed_work(&info->bat_work, DS278x_DELAY);
+ return 0;
+}
+#endif /* CONFIG_PM_SLEEP */
+
+static SIMPLE_DEV_PM_OPS(ds278x_battery_pm_ops, ds278x_suspend, ds278x_resume);
+
+enum ds278x_num_id {
+ DS2782 = 0,
+ DS2786,
+};
+
+static const struct ds278x_battery_ops ds278x_ops[] = {
+ [DS2782] = {
+ .get_battery_current = ds2782_get_current,
+ .get_battery_voltage = ds2782_get_voltage,
+ .get_battery_capacity = ds2782_get_capacity,
+ },
+ [DS2786] = {
+ .get_battery_current = ds2786_get_current,
+ .get_battery_voltage = ds2786_get_voltage,
+ .get_battery_capacity = ds2786_get_capacity,
+ }
+};
+
+static int ds278x_battery_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct ds278x_platform_data *pdata = client->dev.platform_data;
+ struct power_supply_config psy_cfg = {};
+ struct ds278x_info *info;
+ int ret;
+ int num;
+
+ /*
+ * ds2786 should have the sense resistor value set
+ * in the platform data
+ */
+ if (id->driver_data == DS2786 && !pdata) {
+ dev_err(&client->dev, "missing platform data for ds2786\n");
+ return -EINVAL;
+ }
+
+ /* Get an ID for this battery */
+ mutex_lock(&battery_lock);
+ ret = idr_alloc(&battery_id, client, 0, 0, GFP_KERNEL);
+ mutex_unlock(&battery_lock);
+ if (ret < 0)
+ goto fail_id;
+ num = ret;
+
+ info = kzalloc(sizeof(*info), GFP_KERNEL);
+ if (!info) {
+ ret = -ENOMEM;
+ goto fail_info;
+ }
+
+ info->battery_desc.name = kasprintf(GFP_KERNEL, "%s-%d",
+ client->name, num);
+ if (!info->battery_desc.name) {
+ ret = -ENOMEM;
+ goto fail_name;
+ }
+
+ if (id->driver_data == DS2786)
+ info->rsns = pdata->rsns;
+
+ i2c_set_clientdata(client, info);
+ info->client = client;
+ info->id = num;
+ info->ops = &ds278x_ops[id->driver_data];
+ ds278x_power_supply_init(&info->battery_desc);
+ psy_cfg.drv_data = info;
+
+ info->capacity = 100;
+ info->status = POWER_SUPPLY_STATUS_FULL;
+
+ INIT_DELAYED_WORK(&info->bat_work, ds278x_bat_work);
+
+ info->battery = power_supply_register(&client->dev,
+ &info->battery_desc, &psy_cfg);
+ if (IS_ERR(info->battery)) {
+ dev_err(&client->dev, "failed to register battery\n");
+ ret = PTR_ERR(info->battery);
+ goto fail_register;
+ } else {
+ schedule_delayed_work(&info->bat_work, DS278x_DELAY);
+ }
+
+ return 0;
+
+fail_register:
+ kfree(info->battery_desc.name);
+fail_name:
+ kfree(info);
+fail_info:
+ mutex_lock(&battery_lock);
+ idr_remove(&battery_id, num);
+ mutex_unlock(&battery_lock);
+fail_id:
+ return ret;
+}
+
+static const struct i2c_device_id ds278x_id[] = {
+ {"ds2782", DS2782},
+ {"ds2786", DS2786},
+ {},
+};
+MODULE_DEVICE_TABLE(i2c, ds278x_id);
+
+static struct i2c_driver ds278x_battery_driver = {
+ .driver = {
+ .name = "ds2782-battery",
+ .pm = &ds278x_battery_pm_ops,
+ },
+ .probe = ds278x_battery_probe,
+ .remove = ds278x_battery_remove,
+ .id_table = ds278x_id,
+};
+module_i2c_driver(ds278x_battery_driver);
+
+MODULE_AUTHOR("Ryan Mallon");
+MODULE_DESCRIPTION("Maxim/Dallas DS2782 Stand-Alone Fuel Gauge IC driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/power/supply/generic-adc-battery.c b/drivers/power/supply/generic-adc-battery.c
new file mode 100644
index 000000000..09bb4ff29
--- /dev/null
+++ b/drivers/power/supply/generic-adc-battery.c
@@ -0,0 +1,429 @@
+/*
+ * Generic battery driver code using IIO
+ * Copyright (C) 2012, Anish Kumar <anish198519851985@gmail.com>
+ * based on jz4740-battery.c
+ * based on s3c_adc_battery.c
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file COPYING in the main directory of this archive for
+ * more details.
+ *
+ */
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/power_supply.h>
+#include <linux/gpio.h>
+#include <linux/err.h>
+#include <linux/timer.h>
+#include <linux/jiffies.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/iio/consumer.h>
+#include <linux/iio/types.h>
+#include <linux/power/generic-adc-battery.h>
+
+#define JITTER_DEFAULT 10 /* hope 10ms is enough */
+
+enum gab_chan_type {
+ GAB_VOLTAGE = 0,
+ GAB_CURRENT,
+ GAB_POWER,
+ GAB_MAX_CHAN_TYPE
+};
+
+/*
+ * gab_chan_name suggests the standard channel names for commonly used
+ * channel types.
+ */
+static const char *const gab_chan_name[] = {
+ [GAB_VOLTAGE] = "voltage",
+ [GAB_CURRENT] = "current",
+ [GAB_POWER] = "power",
+};
+
+struct gab {
+ struct power_supply *psy;
+ struct power_supply_desc psy_desc;
+ struct iio_channel *channel[GAB_MAX_CHAN_TYPE];
+ struct gab_platform_data *pdata;
+ struct delayed_work bat_work;
+ int level;
+ int status;
+ bool cable_plugged;
+};
+
+static struct gab *to_generic_bat(struct power_supply *psy)
+{
+ return power_supply_get_drvdata(psy);
+}
+
+static void gab_ext_power_changed(struct power_supply *psy)
+{
+ struct gab *adc_bat = to_generic_bat(psy);
+
+ schedule_delayed_work(&adc_bat->bat_work, msecs_to_jiffies(0));
+}
+
+static const enum power_supply_property gab_props[] = {
+ POWER_SUPPLY_PROP_STATUS,
+ POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN,
+ POWER_SUPPLY_PROP_CHARGE_EMPTY_DESIGN,
+ POWER_SUPPLY_PROP_CHARGE_NOW,
+ POWER_SUPPLY_PROP_VOLTAGE_NOW,
+ POWER_SUPPLY_PROP_CURRENT_NOW,
+ POWER_SUPPLY_PROP_TECHNOLOGY,
+ POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN,
+ POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN,
+ POWER_SUPPLY_PROP_MODEL_NAME,
+};
+
+/*
+ * This properties are set based on the received platform data and this
+ * should correspond one-to-one with enum chan_type.
+ */
+static const enum power_supply_property gab_dyn_props[] = {
+ POWER_SUPPLY_PROP_VOLTAGE_NOW,
+ POWER_SUPPLY_PROP_CURRENT_NOW,
+ POWER_SUPPLY_PROP_POWER_NOW,
+};
+
+static bool gab_charge_finished(struct gab *adc_bat)
+{
+ struct gab_platform_data *pdata = adc_bat->pdata;
+ bool ret = gpio_get_value(pdata->gpio_charge_finished);
+ bool inv = pdata->gpio_inverted;
+
+ if (!gpio_is_valid(pdata->gpio_charge_finished))
+ return false;
+ return ret ^ inv;
+}
+
+static int gab_get_status(struct gab *adc_bat)
+{
+ struct gab_platform_data *pdata = adc_bat->pdata;
+ struct power_supply_info *bat_info;
+
+ bat_info = &pdata->battery_info;
+ if (adc_bat->level == bat_info->charge_full_design)
+ return POWER_SUPPLY_STATUS_FULL;
+ return adc_bat->status;
+}
+
+static enum gab_chan_type gab_prop_to_chan(enum power_supply_property psp)
+{
+ switch (psp) {
+ case POWER_SUPPLY_PROP_POWER_NOW:
+ return GAB_POWER;
+ case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+ return GAB_VOLTAGE;
+ case POWER_SUPPLY_PROP_CURRENT_NOW:
+ return GAB_CURRENT;
+ default:
+ WARN_ON(1);
+ break;
+ }
+ return GAB_POWER;
+}
+
+static int read_channel(struct gab *adc_bat, enum power_supply_property psp,
+ int *result)
+{
+ int ret;
+ int chan_index;
+
+ chan_index = gab_prop_to_chan(psp);
+ ret = iio_read_channel_processed(adc_bat->channel[chan_index],
+ result);
+ if (ret < 0)
+ pr_err("read channel error\n");
+ else
+ *result *= 1000;
+
+ return ret;
+}
+
+static int gab_get_property(struct power_supply *psy,
+ enum power_supply_property psp, union power_supply_propval *val)
+{
+ struct gab *adc_bat;
+ struct gab_platform_data *pdata;
+ struct power_supply_info *bat_info;
+ int result = 0;
+ int ret = 0;
+
+ adc_bat = to_generic_bat(psy);
+ if (!adc_bat) {
+ dev_err(&psy->dev, "no battery infos ?!\n");
+ return -EINVAL;
+ }
+ pdata = adc_bat->pdata;
+ bat_info = &pdata->battery_info;
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_STATUS:
+ val->intval = gab_get_status(adc_bat);
+ break;
+ case POWER_SUPPLY_PROP_CHARGE_EMPTY_DESIGN:
+ val->intval = 0;
+ break;
+ case POWER_SUPPLY_PROP_CHARGE_NOW:
+ val->intval = pdata->cal_charge(result);
+ break;
+ case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+ case POWER_SUPPLY_PROP_CURRENT_NOW:
+ case POWER_SUPPLY_PROP_POWER_NOW:
+ ret = read_channel(adc_bat, psp, &result);
+ if (ret < 0)
+ goto err;
+ val->intval = result;
+ break;
+ case POWER_SUPPLY_PROP_TECHNOLOGY:
+ val->intval = bat_info->technology;
+ break;
+ case POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN:
+ val->intval = bat_info->voltage_min_design;
+ break;
+ case POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN:
+ val->intval = bat_info->voltage_max_design;
+ break;
+ case POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN:
+ val->intval = bat_info->charge_full_design;
+ break;
+ case POWER_SUPPLY_PROP_MODEL_NAME:
+ val->strval = bat_info->name;
+ break;
+ default:
+ return -EINVAL;
+ }
+err:
+ return ret;
+}
+
+static void gab_work(struct work_struct *work)
+{
+ struct gab *adc_bat;
+ struct delayed_work *delayed_work;
+ bool is_plugged;
+ int status;
+
+ delayed_work = to_delayed_work(work);
+ adc_bat = container_of(delayed_work, struct gab, bat_work);
+ status = adc_bat->status;
+
+ is_plugged = power_supply_am_i_supplied(adc_bat->psy);
+ adc_bat->cable_plugged = is_plugged;
+
+ if (!is_plugged)
+ adc_bat->status = POWER_SUPPLY_STATUS_DISCHARGING;
+ else if (gab_charge_finished(adc_bat))
+ adc_bat->status = POWER_SUPPLY_STATUS_NOT_CHARGING;
+ else
+ adc_bat->status = POWER_SUPPLY_STATUS_CHARGING;
+
+ if (status != adc_bat->status)
+ power_supply_changed(adc_bat->psy);
+}
+
+static irqreturn_t gab_charged(int irq, void *dev_id)
+{
+ struct gab *adc_bat = dev_id;
+ struct gab_platform_data *pdata = adc_bat->pdata;
+ int delay;
+
+ delay = pdata->jitter_delay ? pdata->jitter_delay : JITTER_DEFAULT;
+ schedule_delayed_work(&adc_bat->bat_work,
+ msecs_to_jiffies(delay));
+ return IRQ_HANDLED;
+}
+
+static int gab_probe(struct platform_device *pdev)
+{
+ struct gab *adc_bat;
+ struct power_supply_desc *psy_desc;
+ struct power_supply_config psy_cfg = {};
+ struct gab_platform_data *pdata = pdev->dev.platform_data;
+ enum power_supply_property *properties;
+ int ret = 0;
+ int chan;
+ int index = ARRAY_SIZE(gab_props);
+ bool any = false;
+
+ adc_bat = devm_kzalloc(&pdev->dev, sizeof(*adc_bat), GFP_KERNEL);
+ if (!adc_bat) {
+ dev_err(&pdev->dev, "failed to allocate memory\n");
+ return -ENOMEM;
+ }
+
+ psy_cfg.drv_data = adc_bat;
+ psy_desc = &adc_bat->psy_desc;
+ psy_desc->name = pdata->battery_info.name;
+
+ /* bootup default values for the battery */
+ adc_bat->cable_plugged = false;
+ adc_bat->status = POWER_SUPPLY_STATUS_DISCHARGING;
+ psy_desc->type = POWER_SUPPLY_TYPE_BATTERY;
+ psy_desc->get_property = gab_get_property;
+ psy_desc->external_power_changed = gab_ext_power_changed;
+ adc_bat->pdata = pdata;
+
+ /*
+ * copying the static properties and allocating extra memory for holding
+ * the extra configurable properties received from platform data.
+ */
+ properties = kcalloc(ARRAY_SIZE(gab_props) +
+ ARRAY_SIZE(gab_chan_name),
+ sizeof(*properties),
+ GFP_KERNEL);
+ if (!properties) {
+ ret = -ENOMEM;
+ goto first_mem_fail;
+ }
+
+ memcpy(properties, gab_props, sizeof(gab_props));
+
+ /*
+ * getting channel from iio and copying the battery properties
+ * based on the channel supported by consumer device.
+ */
+ for (chan = 0; chan < ARRAY_SIZE(gab_chan_name); chan++) {
+ adc_bat->channel[chan] = iio_channel_get(&pdev->dev,
+ gab_chan_name[chan]);
+ if (IS_ERR(adc_bat->channel[chan])) {
+ ret = PTR_ERR(adc_bat->channel[chan]);
+ adc_bat->channel[chan] = NULL;
+ } else {
+ /* copying properties for supported channels only */
+ int index2;
+
+ for (index2 = 0; index2 < index; index2++) {
+ if (properties[index2] == gab_dyn_props[chan])
+ break; /* already known */
+ }
+ if (index2 == index) /* really new */
+ properties[index++] = gab_dyn_props[chan];
+ any = true;
+ }
+ }
+
+ /* none of the channels are supported so let's bail out */
+ if (!any) {
+ ret = -ENODEV;
+ goto second_mem_fail;
+ }
+
+ /*
+ * Total number of properties is equal to static properties
+ * plus the dynamic properties.Some properties may not be set
+ * as come channels may be not be supported by the device.So
+ * we need to take care of that.
+ */
+ psy_desc->properties = properties;
+ psy_desc->num_properties = index;
+
+ adc_bat->psy = power_supply_register(&pdev->dev, psy_desc, &psy_cfg);
+ if (IS_ERR(adc_bat->psy)) {
+ ret = PTR_ERR(adc_bat->psy);
+ goto err_reg_fail;
+ }
+
+ INIT_DELAYED_WORK(&adc_bat->bat_work, gab_work);
+
+ if (gpio_is_valid(pdata->gpio_charge_finished)) {
+ int irq;
+ ret = gpio_request(pdata->gpio_charge_finished, "charged");
+ if (ret)
+ goto gpio_req_fail;
+
+ irq = gpio_to_irq(pdata->gpio_charge_finished);
+ ret = request_any_context_irq(irq, gab_charged,
+ IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
+ "battery charged", adc_bat);
+ if (ret < 0)
+ goto err_gpio;
+ }
+
+ platform_set_drvdata(pdev, adc_bat);
+
+ /* Schedule timer to check current status */
+ schedule_delayed_work(&adc_bat->bat_work,
+ msecs_to_jiffies(0));
+ return 0;
+
+err_gpio:
+ gpio_free(pdata->gpio_charge_finished);
+gpio_req_fail:
+ power_supply_unregister(adc_bat->psy);
+err_reg_fail:
+ for (chan = 0; chan < ARRAY_SIZE(gab_chan_name); chan++) {
+ if (adc_bat->channel[chan])
+ iio_channel_release(adc_bat->channel[chan]);
+ }
+second_mem_fail:
+ kfree(properties);
+first_mem_fail:
+ return ret;
+}
+
+static int gab_remove(struct platform_device *pdev)
+{
+ int chan;
+ struct gab *adc_bat = platform_get_drvdata(pdev);
+ struct gab_platform_data *pdata = adc_bat->pdata;
+
+ power_supply_unregister(adc_bat->psy);
+
+ if (gpio_is_valid(pdata->gpio_charge_finished)) {
+ free_irq(gpio_to_irq(pdata->gpio_charge_finished), adc_bat);
+ gpio_free(pdata->gpio_charge_finished);
+ }
+
+ for (chan = 0; chan < ARRAY_SIZE(gab_chan_name); chan++) {
+ if (adc_bat->channel[chan])
+ iio_channel_release(adc_bat->channel[chan]);
+ }
+
+ kfree(adc_bat->psy_desc.properties);
+ cancel_delayed_work_sync(&adc_bat->bat_work);
+ return 0;
+}
+
+static int __maybe_unused gab_suspend(struct device *dev)
+{
+ struct gab *adc_bat = dev_get_drvdata(dev);
+
+ cancel_delayed_work_sync(&adc_bat->bat_work);
+ adc_bat->status = POWER_SUPPLY_STATUS_UNKNOWN;
+ return 0;
+}
+
+static int __maybe_unused gab_resume(struct device *dev)
+{
+ struct gab *adc_bat = dev_get_drvdata(dev);
+ struct gab_platform_data *pdata = adc_bat->pdata;
+ int delay;
+
+ delay = pdata->jitter_delay ? pdata->jitter_delay : JITTER_DEFAULT;
+
+ /* Schedule timer to check current status */
+ schedule_delayed_work(&adc_bat->bat_work,
+ msecs_to_jiffies(delay));
+ return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(gab_pm_ops, gab_suspend, gab_resume);
+
+static struct platform_driver gab_driver = {
+ .driver = {
+ .name = "generic-adc-battery",
+ .pm = &gab_pm_ops,
+ },
+ .probe = gab_probe,
+ .remove = gab_remove,
+};
+module_platform_driver(gab_driver);
+
+MODULE_AUTHOR("anish kumar <anish198519851985@gmail.com>");
+MODULE_DESCRIPTION("generic battery driver using IIO");
+MODULE_LICENSE("GPL");
diff --git a/drivers/power/supply/goldfish_battery.c b/drivers/power/supply/goldfish_battery.c
new file mode 100644
index 000000000..bf1754355
--- /dev/null
+++ b/drivers/power/supply/goldfish_battery.c
@@ -0,0 +1,290 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Power supply driver for the goldfish emulator
+ *
+ * Copyright (C) 2008 Google, Inc.
+ * Copyright (C) 2012 Intel, Inc.
+ * Copyright (C) 2013 Intel, Inc.
+ * Author: Mike Lockwood <lockwood@android.com>
+ */
+
+#include <linux/module.h>
+#include <linux/err.h>
+#include <linux/platform_device.h>
+#include <linux/power_supply.h>
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/acpi.h>
+
+struct goldfish_battery_data {
+ void __iomem *reg_base;
+ int irq;
+ spinlock_t lock;
+
+ struct power_supply *battery;
+ struct power_supply *ac;
+};
+
+#define GOLDFISH_BATTERY_READ(data, addr) \
+ (readl(data->reg_base + addr))
+#define GOLDFISH_BATTERY_WRITE(data, addr, x) \
+ (writel(x, data->reg_base + addr))
+
+enum {
+ /* status register */
+ BATTERY_INT_STATUS = 0x00,
+ /* set this to enable IRQ */
+ BATTERY_INT_ENABLE = 0x04,
+
+ BATTERY_AC_ONLINE = 0x08,
+ BATTERY_STATUS = 0x0C,
+ BATTERY_HEALTH = 0x10,
+ BATTERY_PRESENT = 0x14,
+ BATTERY_CAPACITY = 0x18,
+ BATTERY_VOLTAGE = 0x1C,
+ BATTERY_TEMP = 0x20,
+ BATTERY_CHARGE_COUNTER = 0x24,
+ BATTERY_VOLTAGE_MAX = 0x28,
+ BATTERY_CURRENT_MAX = 0x2C,
+ BATTERY_CURRENT_NOW = 0x30,
+ BATTERY_CURRENT_AVG = 0x34,
+ BATTERY_CHARGE_FULL_UAH = 0x38,
+ BATTERY_CYCLE_COUNT = 0x40,
+
+ BATTERY_STATUS_CHANGED = 1U << 0,
+ AC_STATUS_CHANGED = 1U << 1,
+ BATTERY_INT_MASK = BATTERY_STATUS_CHANGED | AC_STATUS_CHANGED,
+};
+
+
+static int goldfish_ac_get_property(struct power_supply *psy,
+ enum power_supply_property psp,
+ union power_supply_propval *val)
+{
+ struct goldfish_battery_data *data = power_supply_get_drvdata(psy);
+ int ret = 0;
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_ONLINE:
+ val->intval = GOLDFISH_BATTERY_READ(data, BATTERY_AC_ONLINE);
+ break;
+ case POWER_SUPPLY_PROP_VOLTAGE_MAX:
+ val->intval = GOLDFISH_BATTERY_READ(data, BATTERY_VOLTAGE_MAX);
+ break;
+ case POWER_SUPPLY_PROP_CURRENT_MAX:
+ val->intval = GOLDFISH_BATTERY_READ(data, BATTERY_CURRENT_MAX);
+ break;
+ default:
+ ret = -EINVAL;
+ break;
+ }
+ return ret;
+}
+
+static int goldfish_battery_get_property(struct power_supply *psy,
+ enum power_supply_property psp,
+ union power_supply_propval *val)
+{
+ struct goldfish_battery_data *data = power_supply_get_drvdata(psy);
+ int ret = 0;
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_STATUS:
+ val->intval = GOLDFISH_BATTERY_READ(data, BATTERY_STATUS);
+ break;
+ case POWER_SUPPLY_PROP_HEALTH:
+ val->intval = GOLDFISH_BATTERY_READ(data, BATTERY_HEALTH);
+ break;
+ case POWER_SUPPLY_PROP_PRESENT:
+ val->intval = GOLDFISH_BATTERY_READ(data, BATTERY_PRESENT);
+ break;
+ case POWER_SUPPLY_PROP_TECHNOLOGY:
+ val->intval = POWER_SUPPLY_TECHNOLOGY_LION;
+ break;
+ case POWER_SUPPLY_PROP_CAPACITY:
+ val->intval = GOLDFISH_BATTERY_READ(data, BATTERY_CAPACITY);
+ break;
+ case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+ val->intval = GOLDFISH_BATTERY_READ(data, BATTERY_VOLTAGE);
+ break;
+ case POWER_SUPPLY_PROP_TEMP:
+ val->intval = GOLDFISH_BATTERY_READ(data, BATTERY_TEMP);
+ break;
+ case POWER_SUPPLY_PROP_CHARGE_COUNTER:
+ val->intval = GOLDFISH_BATTERY_READ(data,
+ BATTERY_CHARGE_COUNTER);
+ break;
+ case POWER_SUPPLY_PROP_CURRENT_NOW:
+ val->intval = GOLDFISH_BATTERY_READ(data, BATTERY_CURRENT_NOW);
+ break;
+ case POWER_SUPPLY_PROP_CURRENT_AVG:
+ val->intval = GOLDFISH_BATTERY_READ(data, BATTERY_CURRENT_AVG);
+ break;
+ case POWER_SUPPLY_PROP_CHARGE_FULL:
+ val->intval = GOLDFISH_BATTERY_READ(data,
+ BATTERY_CHARGE_FULL_UAH);
+ break;
+ case POWER_SUPPLY_PROP_CYCLE_COUNT:
+ val->intval = GOLDFISH_BATTERY_READ(data, BATTERY_CYCLE_COUNT);
+ break;
+ default:
+ ret = -EINVAL;
+ break;
+ }
+
+ return ret;
+}
+
+static enum power_supply_property goldfish_battery_props[] = {
+ POWER_SUPPLY_PROP_STATUS,
+ POWER_SUPPLY_PROP_HEALTH,
+ POWER_SUPPLY_PROP_PRESENT,
+ POWER_SUPPLY_PROP_TECHNOLOGY,
+ POWER_SUPPLY_PROP_CAPACITY,
+ POWER_SUPPLY_PROP_VOLTAGE_NOW,
+ POWER_SUPPLY_PROP_TEMP,
+ POWER_SUPPLY_PROP_CHARGE_COUNTER,
+ POWER_SUPPLY_PROP_CURRENT_NOW,
+ POWER_SUPPLY_PROP_CURRENT_AVG,
+ POWER_SUPPLY_PROP_CHARGE_FULL,
+ POWER_SUPPLY_PROP_CYCLE_COUNT,
+};
+
+static enum power_supply_property goldfish_ac_props[] = {
+ POWER_SUPPLY_PROP_ONLINE,
+ POWER_SUPPLY_PROP_VOLTAGE_MAX,
+ POWER_SUPPLY_PROP_CURRENT_MAX,
+};
+
+static irqreturn_t goldfish_battery_interrupt(int irq, void *dev_id)
+{
+ unsigned long irq_flags;
+ struct goldfish_battery_data *data = dev_id;
+ uint32_t status;
+
+ spin_lock_irqsave(&data->lock, irq_flags);
+
+ /* read status flags, which will clear the interrupt */
+ status = GOLDFISH_BATTERY_READ(data, BATTERY_INT_STATUS);
+ status &= BATTERY_INT_MASK;
+
+ if (status & BATTERY_STATUS_CHANGED)
+ power_supply_changed(data->battery);
+ if (status & AC_STATUS_CHANGED)
+ power_supply_changed(data->ac);
+
+ spin_unlock_irqrestore(&data->lock, irq_flags);
+ return status ? IRQ_HANDLED : IRQ_NONE;
+}
+
+static const struct power_supply_desc battery_desc = {
+ .properties = goldfish_battery_props,
+ .num_properties = ARRAY_SIZE(goldfish_battery_props),
+ .get_property = goldfish_battery_get_property,
+ .name = "battery",
+ .type = POWER_SUPPLY_TYPE_BATTERY,
+};
+
+static const struct power_supply_desc ac_desc = {
+ .properties = goldfish_ac_props,
+ .num_properties = ARRAY_SIZE(goldfish_ac_props),
+ .get_property = goldfish_ac_get_property,
+ .name = "ac",
+ .type = POWER_SUPPLY_TYPE_MAINS,
+};
+
+static int goldfish_battery_probe(struct platform_device *pdev)
+{
+ int ret;
+ struct resource *r;
+ struct goldfish_battery_data *data;
+ struct power_supply_config psy_cfg = {};
+
+ data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
+ if (data == NULL)
+ return -ENOMEM;
+
+ spin_lock_init(&data->lock);
+
+ r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (r == NULL) {
+ dev_err(&pdev->dev, "platform_get_resource failed\n");
+ return -ENODEV;
+ }
+
+ data->reg_base = devm_ioremap(&pdev->dev, r->start, resource_size(r));
+ if (data->reg_base == NULL) {
+ dev_err(&pdev->dev, "unable to remap MMIO\n");
+ return -ENOMEM;
+ }
+
+ data->irq = platform_get_irq(pdev, 0);
+ if (data->irq < 0) {
+ dev_err(&pdev->dev, "platform_get_irq failed\n");
+ return -ENODEV;
+ }
+
+ ret = devm_request_irq(&pdev->dev, data->irq,
+ goldfish_battery_interrupt,
+ IRQF_SHARED, pdev->name, data);
+ if (ret)
+ return ret;
+
+ psy_cfg.drv_data = data;
+
+ data->ac = power_supply_register(&pdev->dev, &ac_desc, &psy_cfg);
+ if (IS_ERR(data->ac))
+ return PTR_ERR(data->ac);
+
+ data->battery = power_supply_register(&pdev->dev, &battery_desc,
+ &psy_cfg);
+ if (IS_ERR(data->battery)) {
+ power_supply_unregister(data->ac);
+ return PTR_ERR(data->battery);
+ }
+
+ platform_set_drvdata(pdev, data);
+
+ GOLDFISH_BATTERY_WRITE(data, BATTERY_INT_ENABLE, BATTERY_INT_MASK);
+ return 0;
+}
+
+static int goldfish_battery_remove(struct platform_device *pdev)
+{
+ struct goldfish_battery_data *data = platform_get_drvdata(pdev);
+
+ power_supply_unregister(data->battery);
+ power_supply_unregister(data->ac);
+ return 0;
+}
+
+static const struct of_device_id goldfish_battery_of_match[] = {
+ { .compatible = "google,goldfish-battery", },
+ {},
+};
+MODULE_DEVICE_TABLE(of, goldfish_battery_of_match);
+
+#ifdef CONFIG_ACPI
+static const struct acpi_device_id goldfish_battery_acpi_match[] = {
+ { "GFSH0001", 0 },
+ { },
+};
+MODULE_DEVICE_TABLE(acpi, goldfish_battery_acpi_match);
+#endif
+
+static struct platform_driver goldfish_battery_device = {
+ .probe = goldfish_battery_probe,
+ .remove = goldfish_battery_remove,
+ .driver = {
+ .name = "goldfish-battery",
+ .of_match_table = goldfish_battery_of_match,
+ .acpi_match_table = ACPI_PTR(goldfish_battery_acpi_match),
+ }
+};
+module_platform_driver(goldfish_battery_device);
+
+MODULE_AUTHOR("Mike Lockwood lockwood@android.com");
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Battery driver for the Goldfish emulator");
diff --git a/drivers/power/supply/gpio-charger.c b/drivers/power/supply/gpio-charger.c
new file mode 100644
index 000000000..68212b397
--- /dev/null
+++ b/drivers/power/supply/gpio-charger.c
@@ -0,0 +1,400 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2010, Lars-Peter Clausen <lars@metafoo.de>
+ * Driver for chargers which report their online status through a GPIO pin
+ */
+
+#include <linux/device.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/power_supply.h>
+#include <linux/slab.h>
+#include <linux/of.h>
+#include <linux/gpio/consumer.h>
+
+#include <linux/power/gpio-charger.h>
+
+struct gpio_mapping {
+ u32 limit_ua;
+ u32 gpiodata;
+} __packed;
+
+struct gpio_charger {
+ struct device *dev;
+ unsigned int irq;
+ unsigned int charge_status_irq;
+ bool wakeup_enabled;
+
+ struct power_supply *charger;
+ struct power_supply_desc charger_desc;
+ struct gpio_desc *gpiod;
+ struct gpio_desc *charge_status;
+
+ struct gpio_descs *current_limit_gpios;
+ struct gpio_mapping *current_limit_map;
+ u32 current_limit_map_size;
+ u32 charge_current_limit;
+};
+
+static irqreturn_t gpio_charger_irq(int irq, void *devid)
+{
+ struct power_supply *charger = devid;
+
+ power_supply_changed(charger);
+
+ return IRQ_HANDLED;
+}
+
+static inline struct gpio_charger *psy_to_gpio_charger(struct power_supply *psy)
+{
+ return power_supply_get_drvdata(psy);
+}
+
+static int set_charge_current_limit(struct gpio_charger *gpio_charger, int val)
+{
+ struct gpio_mapping mapping;
+ int ndescs = gpio_charger->current_limit_gpios->ndescs;
+ struct gpio_desc **gpios = gpio_charger->current_limit_gpios->desc;
+ int i;
+
+ if (!gpio_charger->current_limit_map_size)
+ return -EINVAL;
+
+ for (i = 0; i < gpio_charger->current_limit_map_size; i++) {
+ if (gpio_charger->current_limit_map[i].limit_ua <= val)
+ break;
+ }
+ mapping = gpio_charger->current_limit_map[i];
+
+ for (i = 0; i < ndescs; i++) {
+ bool val = (mapping.gpiodata >> i) & 1;
+ gpiod_set_value_cansleep(gpios[ndescs-i-1], val);
+ }
+
+ gpio_charger->charge_current_limit = mapping.limit_ua;
+
+ dev_dbg(gpio_charger->dev, "set charge current limit to %d (requested: %d)\n",
+ gpio_charger->charge_current_limit, val);
+
+ return 0;
+}
+
+static int gpio_charger_get_property(struct power_supply *psy,
+ enum power_supply_property psp, union power_supply_propval *val)
+{
+ struct gpio_charger *gpio_charger = psy_to_gpio_charger(psy);
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_ONLINE:
+ val->intval = gpiod_get_value_cansleep(gpio_charger->gpiod);
+ break;
+ case POWER_SUPPLY_PROP_STATUS:
+ if (gpiod_get_value_cansleep(gpio_charger->charge_status))
+ val->intval = POWER_SUPPLY_STATUS_CHARGING;
+ else
+ val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING;
+ break;
+ case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX:
+ val->intval = gpio_charger->charge_current_limit;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int gpio_charger_set_property(struct power_supply *psy,
+ enum power_supply_property psp, const union power_supply_propval *val)
+{
+ struct gpio_charger *gpio_charger = psy_to_gpio_charger(psy);
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX:
+ return set_charge_current_limit(gpio_charger, val->intval);
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int gpio_charger_property_is_writeable(struct power_supply *psy,
+ enum power_supply_property psp)
+{
+ switch (psp) {
+ case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX:
+ return 1;
+ default:
+ break;
+ }
+
+ return 0;
+}
+
+static enum power_supply_type gpio_charger_get_type(struct device *dev)
+{
+ const char *chargetype;
+
+ if (!device_property_read_string(dev, "charger-type", &chargetype)) {
+ if (!strcmp("unknown", chargetype))
+ return POWER_SUPPLY_TYPE_UNKNOWN;
+ if (!strcmp("battery", chargetype))
+ return POWER_SUPPLY_TYPE_BATTERY;
+ if (!strcmp("ups", chargetype))
+ return POWER_SUPPLY_TYPE_UPS;
+ if (!strcmp("mains", chargetype))
+ return POWER_SUPPLY_TYPE_MAINS;
+ if (!strcmp("usb-sdp", chargetype))
+ return POWER_SUPPLY_TYPE_USB;
+ if (!strcmp("usb-dcp", chargetype))
+ return POWER_SUPPLY_TYPE_USB;
+ if (!strcmp("usb-cdp", chargetype))
+ return POWER_SUPPLY_TYPE_USB;
+ if (!strcmp("usb-aca", chargetype))
+ return POWER_SUPPLY_TYPE_USB;
+ }
+ dev_warn(dev, "unknown charger type %s\n", chargetype);
+
+ return POWER_SUPPLY_TYPE_UNKNOWN;
+}
+
+static int gpio_charger_get_irq(struct device *dev, void *dev_id,
+ struct gpio_desc *gpio)
+{
+ int ret, irq = gpiod_to_irq(gpio);
+
+ if (irq > 0) {
+ ret = devm_request_any_context_irq(dev, irq, gpio_charger_irq,
+ IRQF_TRIGGER_RISING |
+ IRQF_TRIGGER_FALLING,
+ dev_name(dev),
+ dev_id);
+ if (ret < 0) {
+ dev_warn(dev, "Failed to request irq: %d\n", ret);
+ irq = 0;
+ }
+ }
+
+ return irq;
+}
+
+static int init_charge_current_limit(struct device *dev,
+ struct gpio_charger *gpio_charger)
+{
+ int i, len;
+ u32 cur_limit = U32_MAX;
+
+ gpio_charger->current_limit_gpios = devm_gpiod_get_array_optional(dev,
+ "charge-current-limit", GPIOD_OUT_LOW);
+ if (IS_ERR(gpio_charger->current_limit_gpios)) {
+ dev_err(dev, "error getting current-limit GPIOs\n");
+ return PTR_ERR(gpio_charger->current_limit_gpios);
+ }
+
+ if (!gpio_charger->current_limit_gpios)
+ return 0;
+
+ len = device_property_read_u32_array(dev, "charge-current-limit-mapping",
+ NULL, 0);
+ if (len < 0)
+ return len;
+
+ if (len == 0 || len % 2) {
+ dev_err(dev, "invalid charge-current-limit-mapping length\n");
+ return -EINVAL;
+ }
+
+ gpio_charger->current_limit_map = devm_kmalloc_array(dev,
+ len / 2, sizeof(*gpio_charger->current_limit_map), GFP_KERNEL);
+ if (!gpio_charger->current_limit_map)
+ return -ENOMEM;
+
+ gpio_charger->current_limit_map_size = len / 2;
+
+ len = device_property_read_u32_array(dev, "charge-current-limit-mapping",
+ (u32*) gpio_charger->current_limit_map, len);
+ if (len < 0)
+ return len;
+
+ for (i=0; i < gpio_charger->current_limit_map_size; i++) {
+ if (gpio_charger->current_limit_map[i].limit_ua > cur_limit) {
+ dev_err(dev, "charge-current-limit-mapping not sorted by current in descending order\n");
+ return -EINVAL;
+ }
+
+ cur_limit = gpio_charger->current_limit_map[i].limit_ua;
+ }
+
+ /* default to smallest current limitation for safety reasons */
+ len = gpio_charger->current_limit_map_size - 1;
+ set_charge_current_limit(gpio_charger,
+ gpio_charger->current_limit_map[len].limit_ua);
+
+ return 0;
+}
+
+/*
+ * The entries will be overwritten by driver's probe routine depending
+ * on the available features. This list ensures, that the array is big
+ * enough for all optional features.
+ */
+static enum power_supply_property gpio_charger_properties[] = {
+ POWER_SUPPLY_PROP_ONLINE,
+ POWER_SUPPLY_PROP_STATUS,
+ POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX,
+};
+
+static int gpio_charger_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ const struct gpio_charger_platform_data *pdata = dev->platform_data;
+ struct power_supply_config psy_cfg = {};
+ struct gpio_charger *gpio_charger;
+ struct power_supply_desc *charger_desc;
+ struct gpio_desc *charge_status;
+ int charge_status_irq;
+ int ret;
+ int num_props = 0;
+
+ if (!pdata && !dev->of_node) {
+ dev_err(dev, "No platform data\n");
+ return -ENOENT;
+ }
+
+ gpio_charger = devm_kzalloc(dev, sizeof(*gpio_charger), GFP_KERNEL);
+ if (!gpio_charger)
+ return -ENOMEM;
+ gpio_charger->dev = dev;
+
+ /*
+ * This will fetch a GPIO descriptor from device tree, ACPI or
+ * boardfile descriptor tables. It's good to try this first.
+ */
+ gpio_charger->gpiod = devm_gpiod_get_optional(dev, NULL, GPIOD_IN);
+ if (IS_ERR(gpio_charger->gpiod)) {
+ /* Just try again if this happens */
+ return dev_err_probe(dev, PTR_ERR(gpio_charger->gpiod),
+ "error getting GPIO descriptor\n");
+ }
+
+ if (gpio_charger->gpiod) {
+ gpio_charger_properties[num_props] = POWER_SUPPLY_PROP_ONLINE;
+ num_props++;
+ }
+
+ charge_status = devm_gpiod_get_optional(dev, "charge-status", GPIOD_IN);
+ if (IS_ERR(charge_status))
+ return PTR_ERR(charge_status);
+ if (charge_status) {
+ gpio_charger->charge_status = charge_status;
+ gpio_charger_properties[num_props] = POWER_SUPPLY_PROP_STATUS;
+ num_props++;
+ }
+
+ ret = init_charge_current_limit(dev, gpio_charger);
+ if (ret < 0)
+ return ret;
+ if (gpio_charger->current_limit_map) {
+ gpio_charger_properties[num_props] =
+ POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX;
+ num_props++;
+ }
+
+ charger_desc = &gpio_charger->charger_desc;
+ charger_desc->properties = gpio_charger_properties;
+ charger_desc->num_properties = num_props;
+ charger_desc->get_property = gpio_charger_get_property;
+ charger_desc->set_property = gpio_charger_set_property;
+ charger_desc->property_is_writeable =
+ gpio_charger_property_is_writeable;
+
+ psy_cfg.of_node = dev->of_node;
+ psy_cfg.drv_data = gpio_charger;
+
+ if (pdata) {
+ charger_desc->name = pdata->name;
+ charger_desc->type = pdata->type;
+ psy_cfg.supplied_to = pdata->supplied_to;
+ psy_cfg.num_supplicants = pdata->num_supplicants;
+ } else {
+ charger_desc->name = dev->of_node->name;
+ charger_desc->type = gpio_charger_get_type(dev);
+ }
+
+ if (!charger_desc->name)
+ charger_desc->name = pdev->name;
+
+ gpio_charger->charger = devm_power_supply_register(dev, charger_desc,
+ &psy_cfg);
+ if (IS_ERR(gpio_charger->charger)) {
+ ret = PTR_ERR(gpio_charger->charger);
+ dev_err(dev, "Failed to register power supply: %d\n", ret);
+ return ret;
+ }
+
+ gpio_charger->irq = gpio_charger_get_irq(dev, gpio_charger->charger,
+ gpio_charger->gpiod);
+
+ charge_status_irq = gpio_charger_get_irq(dev, gpio_charger->charger,
+ gpio_charger->charge_status);
+ gpio_charger->charge_status_irq = charge_status_irq;
+
+ platform_set_drvdata(pdev, gpio_charger);
+
+ device_init_wakeup(dev, 1);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int gpio_charger_suspend(struct device *dev)
+{
+ struct gpio_charger *gpio_charger = dev_get_drvdata(dev);
+
+ if (device_may_wakeup(dev))
+ gpio_charger->wakeup_enabled =
+ !enable_irq_wake(gpio_charger->irq);
+
+ return 0;
+}
+
+static int gpio_charger_resume(struct device *dev)
+{
+ struct gpio_charger *gpio_charger = dev_get_drvdata(dev);
+
+ if (device_may_wakeup(dev) && gpio_charger->wakeup_enabled)
+ disable_irq_wake(gpio_charger->irq);
+ power_supply_changed(gpio_charger->charger);
+
+ return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(gpio_charger_pm_ops,
+ gpio_charger_suspend, gpio_charger_resume);
+
+static const struct of_device_id gpio_charger_match[] = {
+ { .compatible = "gpio-charger" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, gpio_charger_match);
+
+static struct platform_driver gpio_charger_driver = {
+ .probe = gpio_charger_probe,
+ .driver = {
+ .name = "gpio-charger",
+ .pm = &gpio_charger_pm_ops,
+ .of_match_table = gpio_charger_match,
+ },
+};
+
+module_platform_driver(gpio_charger_driver);
+
+MODULE_AUTHOR("Lars-Peter Clausen <lars@metafoo.de>");
+MODULE_DESCRIPTION("Driver for chargers only communicating via GPIO(s)");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:gpio-charger");
diff --git a/drivers/power/supply/ingenic-battery.c b/drivers/power/supply/ingenic-battery.c
new file mode 100644
index 000000000..32dc77fd9
--- /dev/null
+++ b/drivers/power/supply/ingenic-battery.c
@@ -0,0 +1,190 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Battery driver for the Ingenic JZ47xx SoCs
+ * Copyright (c) 2019 Artur Rojek <contact@artur-rojek.eu>
+ *
+ * based on drivers/power/supply/jz4740-battery.c
+ */
+
+#include <linux/iio/consumer.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/power_supply.h>
+#include <linux/property.h>
+
+struct ingenic_battery {
+ struct device *dev;
+ struct iio_channel *channel;
+ struct power_supply_desc desc;
+ struct power_supply *battery;
+ struct power_supply_battery_info info;
+};
+
+static int ingenic_battery_get_property(struct power_supply *psy,
+ enum power_supply_property psp,
+ union power_supply_propval *val)
+{
+ struct ingenic_battery *bat = power_supply_get_drvdata(psy);
+ struct power_supply_battery_info *info = &bat->info;
+ int ret;
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_HEALTH:
+ ret = iio_read_channel_processed(bat->channel, &val->intval);
+ val->intval *= 1000;
+ if (val->intval < info->voltage_min_design_uv)
+ val->intval = POWER_SUPPLY_HEALTH_DEAD;
+ else if (val->intval > info->voltage_max_design_uv)
+ val->intval = POWER_SUPPLY_HEALTH_OVERVOLTAGE;
+ else
+ val->intval = POWER_SUPPLY_HEALTH_GOOD;
+ return ret;
+ case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+ ret = iio_read_channel_processed(bat->channel, &val->intval);
+ val->intval *= 1000;
+ return ret;
+ case POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN:
+ val->intval = info->voltage_min_design_uv;
+ return 0;
+ case POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN:
+ val->intval = info->voltage_max_design_uv;
+ return 0;
+ default:
+ return -EINVAL;
+ };
+}
+
+/* Set the most appropriate IIO channel voltage reference scale
+ * based on the battery's max voltage.
+ */
+static int ingenic_battery_set_scale(struct ingenic_battery *bat)
+{
+ const int *scale_raw;
+ int scale_len, scale_type, best_idx = -1, best_mV, max_raw, i, ret;
+ u64 max_mV;
+
+ ret = iio_read_max_channel_raw(bat->channel, &max_raw);
+ if (ret) {
+ dev_err(bat->dev, "Unable to read max raw channel value\n");
+ return ret;
+ }
+
+ ret = iio_read_avail_channel_attribute(bat->channel, &scale_raw,
+ &scale_type, &scale_len,
+ IIO_CHAN_INFO_SCALE);
+ if (ret < 0) {
+ dev_err(bat->dev, "Unable to read channel avail scale\n");
+ return ret;
+ }
+ if (ret != IIO_AVAIL_LIST || scale_type != IIO_VAL_FRACTIONAL_LOG2)
+ return -EINVAL;
+
+ max_mV = bat->info.voltage_max_design_uv / 1000;
+
+ for (i = 0; i < scale_len; i += 2) {
+ u64 scale_mV = (max_raw * scale_raw[i]) >> scale_raw[i + 1];
+
+ if (scale_mV < max_mV)
+ continue;
+
+ if (best_idx >= 0 && scale_mV > best_mV)
+ continue;
+
+ best_mV = scale_mV;
+ best_idx = i;
+ }
+
+ if (best_idx < 0) {
+ dev_err(bat->dev, "Unable to find matching voltage scale\n");
+ return -EINVAL;
+ }
+
+ /* Only set scale if there is more than one (fractional) entry */
+ if (scale_len > 2) {
+ ret = iio_write_channel_attribute(bat->channel,
+ scale_raw[best_idx],
+ scale_raw[best_idx + 1],
+ IIO_CHAN_INFO_SCALE);
+ if (ret)
+ return ret;
+ }
+
+ return 0;
+}
+
+static enum power_supply_property ingenic_battery_properties[] = {
+ POWER_SUPPLY_PROP_HEALTH,
+ POWER_SUPPLY_PROP_VOLTAGE_NOW,
+ POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN,
+ POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN,
+};
+
+static int ingenic_battery_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct ingenic_battery *bat;
+ struct power_supply_config psy_cfg = {};
+ struct power_supply_desc *desc;
+ int ret;
+
+ bat = devm_kzalloc(dev, sizeof(*bat), GFP_KERNEL);
+ if (!bat)
+ return -ENOMEM;
+
+ bat->dev = dev;
+ bat->channel = devm_iio_channel_get(dev, "battery");
+ if (IS_ERR(bat->channel))
+ return PTR_ERR(bat->channel);
+
+ desc = &bat->desc;
+ desc->name = "jz-battery";
+ desc->type = POWER_SUPPLY_TYPE_BATTERY;
+ desc->properties = ingenic_battery_properties;
+ desc->num_properties = ARRAY_SIZE(ingenic_battery_properties);
+ desc->get_property = ingenic_battery_get_property;
+ psy_cfg.drv_data = bat;
+ psy_cfg.of_node = dev->of_node;
+
+ bat->battery = devm_power_supply_register(dev, desc, &psy_cfg);
+ if (IS_ERR(bat->battery))
+ return dev_err_probe(dev, PTR_ERR(bat->battery),
+ "Unable to register battery\n");
+
+ ret = power_supply_get_battery_info(bat->battery, &bat->info);
+ if (ret) {
+ dev_err(dev, "Unable to get battery info: %d\n", ret);
+ return ret;
+ }
+ if (bat->info.voltage_min_design_uv < 0) {
+ dev_err(dev, "Unable to get voltage min design\n");
+ return bat->info.voltage_min_design_uv;
+ }
+ if (bat->info.voltage_max_design_uv < 0) {
+ dev_err(dev, "Unable to get voltage max design\n");
+ return bat->info.voltage_max_design_uv;
+ }
+
+ return ingenic_battery_set_scale(bat);
+}
+
+#ifdef CONFIG_OF
+static const struct of_device_id ingenic_battery_of_match[] = {
+ { .compatible = "ingenic,jz4740-battery", },
+ { },
+};
+MODULE_DEVICE_TABLE(of, ingenic_battery_of_match);
+#endif
+
+static struct platform_driver ingenic_battery_driver = {
+ .driver = {
+ .name = "ingenic-battery",
+ .of_match_table = of_match_ptr(ingenic_battery_of_match),
+ },
+ .probe = ingenic_battery_probe,
+};
+module_platform_driver(ingenic_battery_driver);
+
+MODULE_DESCRIPTION("Battery driver for Ingenic JZ47xx SoCs");
+MODULE_AUTHOR("Artur Rojek <contact@artur-rojek.eu>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/power/supply/ipaq_micro_battery.c b/drivers/power/supply/ipaq_micro_battery.c
new file mode 100644
index 000000000..192d9db0f
--- /dev/null
+++ b/drivers/power/supply/ipaq_micro_battery.c
@@ -0,0 +1,313 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ *
+ * h3xxx atmel micro companion support, battery subdevice
+ * based on previous kernel 2.4 version
+ * Author : Alessandro Gardich <gremlin@gremlin.it>
+ * Author : Linus Walleij <linus.walleij@linaro.org>
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mfd/ipaq-micro.h>
+#include <linux/power_supply.h>
+#include <linux/workqueue.h>
+
+#define BATT_PERIOD 100000 /* 100 seconds in milliseconds */
+
+#define MICRO_BATT_CHEM_ALKALINE 0x01
+#define MICRO_BATT_CHEM_NICD 0x02
+#define MICRO_BATT_CHEM_NIMH 0x03
+#define MICRO_BATT_CHEM_LION 0x04
+#define MICRO_BATT_CHEM_LIPOLY 0x05
+#define MICRO_BATT_CHEM_NOT_INSTALLED 0x06
+#define MICRO_BATT_CHEM_UNKNOWN 0xff
+
+#define MICRO_BATT_STATUS_HIGH 0x01
+#define MICRO_BATT_STATUS_LOW 0x02
+#define MICRO_BATT_STATUS_CRITICAL 0x04
+#define MICRO_BATT_STATUS_CHARGING 0x08
+#define MICRO_BATT_STATUS_CHARGEMAIN 0x10
+#define MICRO_BATT_STATUS_DEAD 0x20 /* Battery will not charge */
+#define MICRO_BATT_STATUS_NOTINSTALLED 0x20 /* For expansion pack batteries */
+#define MICRO_BATT_STATUS_FULL 0x40 /* Battery fully charged */
+#define MICRO_BATT_STATUS_NOBATTERY 0x80
+#define MICRO_BATT_STATUS_UNKNOWN 0xff
+
+struct micro_battery {
+ struct ipaq_micro *micro;
+ struct workqueue_struct *wq;
+ struct delayed_work update;
+ u8 ac;
+ u8 chemistry;
+ unsigned int voltage;
+ u16 temperature;
+ u8 flag;
+};
+
+static void micro_battery_work(struct work_struct *work)
+{
+ struct micro_battery *mb = container_of(work,
+ struct micro_battery, update.work);
+ struct ipaq_micro_msg msg_battery = {
+ .id = MSG_BATTERY,
+ };
+ struct ipaq_micro_msg msg_sensor = {
+ .id = MSG_THERMAL_SENSOR,
+ };
+
+ /* First send battery message */
+ ipaq_micro_tx_msg_sync(mb->micro, &msg_battery);
+ if (msg_battery.rx_len < 4)
+ pr_info("ERROR");
+
+ /*
+ * Returned message format:
+ * byte 0: 0x00 = Not plugged in
+ * 0x01 = AC adapter plugged in
+ * byte 1: chemistry
+ * byte 2: voltage LSB
+ * byte 3: voltage MSB
+ * byte 4: flags
+ * byte 5-9: same for battery 2
+ */
+ mb->ac = msg_battery.rx_data[0];
+ mb->chemistry = msg_battery.rx_data[1];
+ mb->voltage = ((((unsigned short)msg_battery.rx_data[3] << 8) +
+ msg_battery.rx_data[2]) * 5000L) * 1000 / 1024;
+ mb->flag = msg_battery.rx_data[4];
+
+ if (msg_battery.rx_len == 9)
+ pr_debug("second battery ignored\n");
+
+ /* Then read the sensor */
+ ipaq_micro_tx_msg_sync(mb->micro, &msg_sensor);
+ mb->temperature = msg_sensor.rx_data[1] << 8 | msg_sensor.rx_data[0];
+
+ queue_delayed_work(mb->wq, &mb->update, msecs_to_jiffies(BATT_PERIOD));
+}
+
+static int get_capacity(struct power_supply *b)
+{
+ struct micro_battery *mb = dev_get_drvdata(b->dev.parent);
+
+ switch (mb->flag & 0x07) {
+ case MICRO_BATT_STATUS_HIGH:
+ return 100;
+ break;
+ case MICRO_BATT_STATUS_LOW:
+ return 50;
+ break;
+ case MICRO_BATT_STATUS_CRITICAL:
+ return 5;
+ break;
+ default:
+ break;
+ }
+ return 0;
+}
+
+static int get_status(struct power_supply *b)
+{
+ struct micro_battery *mb = dev_get_drvdata(b->dev.parent);
+
+ if (mb->flag == MICRO_BATT_STATUS_UNKNOWN)
+ return POWER_SUPPLY_STATUS_UNKNOWN;
+
+ if (mb->flag & MICRO_BATT_STATUS_FULL)
+ return POWER_SUPPLY_STATUS_FULL;
+
+ if ((mb->flag & MICRO_BATT_STATUS_CHARGING) ||
+ (mb->flag & MICRO_BATT_STATUS_CHARGEMAIN))
+ return POWER_SUPPLY_STATUS_CHARGING;
+
+ return POWER_SUPPLY_STATUS_DISCHARGING;
+}
+
+static int micro_batt_get_property(struct power_supply *b,
+ enum power_supply_property psp,
+ union power_supply_propval *val)
+{
+ struct micro_battery *mb = dev_get_drvdata(b->dev.parent);
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_TECHNOLOGY:
+ switch (mb->chemistry) {
+ case MICRO_BATT_CHEM_NICD:
+ val->intval = POWER_SUPPLY_TECHNOLOGY_NiCd;
+ break;
+ case MICRO_BATT_CHEM_NIMH:
+ val->intval = POWER_SUPPLY_TECHNOLOGY_NiMH;
+ break;
+ case MICRO_BATT_CHEM_LION:
+ val->intval = POWER_SUPPLY_TECHNOLOGY_LION;
+ break;
+ case MICRO_BATT_CHEM_LIPOLY:
+ val->intval = POWER_SUPPLY_TECHNOLOGY_LIPO;
+ break;
+ default:
+ val->intval = POWER_SUPPLY_TECHNOLOGY_UNKNOWN;
+ break;
+ }
+ break;
+ case POWER_SUPPLY_PROP_STATUS:
+ val->intval = get_status(b);
+ break;
+ case POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN:
+ val->intval = 4700000;
+ break;
+ case POWER_SUPPLY_PROP_CAPACITY:
+ val->intval = get_capacity(b);
+ break;
+ case POWER_SUPPLY_PROP_TEMP:
+ val->intval = mb->temperature;
+ break;
+ case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+ val->intval = mb->voltage;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int micro_ac_get_property(struct power_supply *b,
+ enum power_supply_property psp,
+ union power_supply_propval *val)
+{
+ struct micro_battery *mb = dev_get_drvdata(b->dev.parent);
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_ONLINE:
+ val->intval = mb->ac;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static enum power_supply_property micro_batt_power_props[] = {
+ POWER_SUPPLY_PROP_TECHNOLOGY,
+ POWER_SUPPLY_PROP_STATUS,
+ POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN,
+ POWER_SUPPLY_PROP_CAPACITY,
+ POWER_SUPPLY_PROP_TEMP,
+ POWER_SUPPLY_PROP_VOLTAGE_NOW,
+};
+
+static const struct power_supply_desc micro_batt_power_desc = {
+ .name = "main-battery",
+ .type = POWER_SUPPLY_TYPE_BATTERY,
+ .properties = micro_batt_power_props,
+ .num_properties = ARRAY_SIZE(micro_batt_power_props),
+ .get_property = micro_batt_get_property,
+ .use_for_apm = 1,
+};
+
+static enum power_supply_property micro_ac_power_props[] = {
+ POWER_SUPPLY_PROP_ONLINE,
+};
+
+static const struct power_supply_desc micro_ac_power_desc = {
+ .name = "ac",
+ .type = POWER_SUPPLY_TYPE_MAINS,
+ .properties = micro_ac_power_props,
+ .num_properties = ARRAY_SIZE(micro_ac_power_props),
+ .get_property = micro_ac_get_property,
+};
+
+static struct power_supply *micro_batt_power, *micro_ac_power;
+
+static int micro_batt_probe(struct platform_device *pdev)
+{
+ struct micro_battery *mb;
+ int ret;
+
+ mb = devm_kzalloc(&pdev->dev, sizeof(*mb), GFP_KERNEL);
+ if (!mb)
+ return -ENOMEM;
+
+ mb->micro = dev_get_drvdata(pdev->dev.parent);
+ mb->wq = alloc_workqueue("ipaq-battery-wq", WQ_MEM_RECLAIM, 0);
+ if (!mb->wq)
+ return -ENOMEM;
+
+ INIT_DELAYED_WORK(&mb->update, micro_battery_work);
+ platform_set_drvdata(pdev, mb);
+ queue_delayed_work(mb->wq, &mb->update, 1);
+
+ micro_batt_power = power_supply_register(&pdev->dev,
+ &micro_batt_power_desc, NULL);
+ if (IS_ERR(micro_batt_power)) {
+ ret = PTR_ERR(micro_batt_power);
+ goto batt_err;
+ }
+
+ micro_ac_power = power_supply_register(&pdev->dev,
+ &micro_ac_power_desc, NULL);
+ if (IS_ERR(micro_ac_power)) {
+ ret = PTR_ERR(micro_ac_power);
+ goto ac_err;
+ }
+
+ dev_info(&pdev->dev, "iPAQ micro battery driver\n");
+ return 0;
+
+ac_err:
+ power_supply_unregister(micro_batt_power);
+batt_err:
+ cancel_delayed_work_sync(&mb->update);
+ destroy_workqueue(mb->wq);
+ return ret;
+}
+
+static int micro_batt_remove(struct platform_device *pdev)
+
+{
+ struct micro_battery *mb = platform_get_drvdata(pdev);
+
+ power_supply_unregister(micro_ac_power);
+ power_supply_unregister(micro_batt_power);
+ cancel_delayed_work_sync(&mb->update);
+ destroy_workqueue(mb->wq);
+
+ return 0;
+}
+
+static int __maybe_unused micro_batt_suspend(struct device *dev)
+{
+ struct micro_battery *mb = dev_get_drvdata(dev);
+
+ cancel_delayed_work_sync(&mb->update);
+ return 0;
+}
+
+static int __maybe_unused micro_batt_resume(struct device *dev)
+{
+ struct micro_battery *mb = dev_get_drvdata(dev);
+
+ queue_delayed_work(mb->wq, &mb->update, msecs_to_jiffies(BATT_PERIOD));
+ return 0;
+}
+
+static const struct dev_pm_ops micro_batt_dev_pm_ops = {
+ SET_SYSTEM_SLEEP_PM_OPS(micro_batt_suspend, micro_batt_resume)
+};
+
+static struct platform_driver micro_batt_device_driver = {
+ .driver = {
+ .name = "ipaq-micro-battery",
+ .pm = &micro_batt_dev_pm_ops,
+ },
+ .probe = micro_batt_probe,
+ .remove = micro_batt_remove,
+};
+module_platform_driver(micro_batt_device_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("driver for iPAQ Atmel micro battery");
+MODULE_ALIAS("platform:ipaq-micro-battery");
diff --git a/drivers/power/supply/isp1704_charger.c b/drivers/power/supply/isp1704_charger.c
new file mode 100644
index 000000000..b6efc454e
--- /dev/null
+++ b/drivers/power/supply/isp1704_charger.c
@@ -0,0 +1,514 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * ISP1704 USB Charger Detection driver
+ *
+ * Copyright (C) 2010 Nokia Corporation
+ * Copyright (C) 2012 - 2013 Pali Rohár <pali@kernel.org>
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/device.h>
+#include <linux/sysfs.h>
+#include <linux/platform_device.h>
+#include <linux/power_supply.h>
+#include <linux/delay.h>
+#include <linux/of.h>
+
+#include <linux/gpio/consumer.h>
+#include <linux/usb/otg.h>
+#include <linux/usb/ulpi.h>
+#include <linux/usb/ch9.h>
+#include <linux/usb/gadget.h>
+
+/* Vendor specific Power Control register */
+#define ISP1704_PWR_CTRL 0x3d
+#define ISP1704_PWR_CTRL_SWCTRL (1 << 0)
+#define ISP1704_PWR_CTRL_DET_COMP (1 << 1)
+#define ISP1704_PWR_CTRL_BVALID_RISE (1 << 2)
+#define ISP1704_PWR_CTRL_BVALID_FALL (1 << 3)
+#define ISP1704_PWR_CTRL_DP_WKPU_EN (1 << 4)
+#define ISP1704_PWR_CTRL_VDAT_DET (1 << 5)
+#define ISP1704_PWR_CTRL_DPVSRC_EN (1 << 6)
+#define ISP1704_PWR_CTRL_HWDETECT (1 << 7)
+
+#define NXP_VENDOR_ID 0x04cc
+
+static u16 isp170x_id[] = {
+ 0x1704,
+ 0x1707,
+};
+
+struct isp1704_charger {
+ struct device *dev;
+ struct power_supply *psy;
+ struct power_supply_desc psy_desc;
+ struct gpio_desc *enable_gpio;
+ struct usb_phy *phy;
+ struct notifier_block nb;
+ struct work_struct work;
+
+ /* properties */
+ char model[8];
+ unsigned present:1;
+ unsigned online:1;
+ unsigned current_max;
+};
+
+static inline int isp1704_read(struct isp1704_charger *isp, u32 reg)
+{
+ return usb_phy_io_read(isp->phy, reg);
+}
+
+static inline int isp1704_write(struct isp1704_charger *isp, u32 reg, u32 val)
+{
+ return usb_phy_io_write(isp->phy, val, reg);
+}
+
+static void isp1704_charger_set_power(struct isp1704_charger *isp, bool on)
+{
+ gpiod_set_value(isp->enable_gpio, on);
+}
+
+/*
+ * Determine is the charging port DCP (dedicated charger) or CDP (Host/HUB
+ * chargers).
+ *
+ * REVISIT: The method is defined in Battery Charging Specification and is
+ * applicable to any ULPI transceiver. Nothing isp170x specific here.
+ */
+static inline int isp1704_charger_type(struct isp1704_charger *isp)
+{
+ u8 reg;
+ u8 func_ctrl;
+ u8 otg_ctrl;
+ int type = POWER_SUPPLY_TYPE_USB_DCP;
+
+ func_ctrl = isp1704_read(isp, ULPI_FUNC_CTRL);
+ otg_ctrl = isp1704_read(isp, ULPI_OTG_CTRL);
+
+ /* disable pulldowns */
+ reg = ULPI_OTG_CTRL_DM_PULLDOWN | ULPI_OTG_CTRL_DP_PULLDOWN;
+ isp1704_write(isp, ULPI_CLR(ULPI_OTG_CTRL), reg);
+
+ /* full speed */
+ isp1704_write(isp, ULPI_CLR(ULPI_FUNC_CTRL),
+ ULPI_FUNC_CTRL_XCVRSEL_MASK);
+ isp1704_write(isp, ULPI_SET(ULPI_FUNC_CTRL),
+ ULPI_FUNC_CTRL_FULL_SPEED);
+
+ /* Enable strong pull-up on DP (1.5K) and reset */
+ reg = ULPI_FUNC_CTRL_TERMSELECT | ULPI_FUNC_CTRL_RESET;
+ isp1704_write(isp, ULPI_SET(ULPI_FUNC_CTRL), reg);
+ usleep_range(1000, 2000);
+
+ reg = isp1704_read(isp, ULPI_DEBUG);
+ if ((reg & 3) != 3)
+ type = POWER_SUPPLY_TYPE_USB_CDP;
+
+ /* recover original state */
+ isp1704_write(isp, ULPI_FUNC_CTRL, func_ctrl);
+ isp1704_write(isp, ULPI_OTG_CTRL, otg_ctrl);
+
+ return type;
+}
+
+/*
+ * ISP1704 detects PS/2 adapters as charger. To make sure the detected charger
+ * is actually a dedicated charger, the following steps need to be taken.
+ */
+static inline int isp1704_charger_verify(struct isp1704_charger *isp)
+{
+ int ret = 0;
+ u8 r;
+
+ /* Reset the transceiver */
+ r = isp1704_read(isp, ULPI_FUNC_CTRL);
+ r |= ULPI_FUNC_CTRL_RESET;
+ isp1704_write(isp, ULPI_FUNC_CTRL, r);
+ usleep_range(1000, 2000);
+
+ /* Set normal mode */
+ r &= ~(ULPI_FUNC_CTRL_RESET | ULPI_FUNC_CTRL_OPMODE_MASK);
+ isp1704_write(isp, ULPI_FUNC_CTRL, r);
+
+ /* Clear the DP and DM pull-down bits */
+ r = ULPI_OTG_CTRL_DP_PULLDOWN | ULPI_OTG_CTRL_DM_PULLDOWN;
+ isp1704_write(isp, ULPI_CLR(ULPI_OTG_CTRL), r);
+
+ /* Enable strong pull-up on DP (1.5K) and reset */
+ r = ULPI_FUNC_CTRL_TERMSELECT | ULPI_FUNC_CTRL_RESET;
+ isp1704_write(isp, ULPI_SET(ULPI_FUNC_CTRL), r);
+ usleep_range(1000, 2000);
+
+ /* Read the line state */
+ if (!isp1704_read(isp, ULPI_DEBUG)) {
+ /* Disable strong pull-up on DP (1.5K) */
+ isp1704_write(isp, ULPI_CLR(ULPI_FUNC_CTRL),
+ ULPI_FUNC_CTRL_TERMSELECT);
+ return 1;
+ }
+
+ /* Is it a charger or PS/2 connection */
+
+ /* Enable weak pull-up resistor on DP */
+ isp1704_write(isp, ULPI_SET(ISP1704_PWR_CTRL),
+ ISP1704_PWR_CTRL_DP_WKPU_EN);
+
+ /* Disable strong pull-up on DP (1.5K) */
+ isp1704_write(isp, ULPI_CLR(ULPI_FUNC_CTRL),
+ ULPI_FUNC_CTRL_TERMSELECT);
+
+ /* Enable weak pull-down resistor on DM */
+ isp1704_write(isp, ULPI_SET(ULPI_OTG_CTRL),
+ ULPI_OTG_CTRL_DM_PULLDOWN);
+
+ /* It's a charger if the line states are clear */
+ if (!(isp1704_read(isp, ULPI_DEBUG)))
+ ret = 1;
+
+ /* Disable weak pull-up resistor on DP */
+ isp1704_write(isp, ULPI_CLR(ISP1704_PWR_CTRL),
+ ISP1704_PWR_CTRL_DP_WKPU_EN);
+
+ return ret;
+}
+
+static inline int isp1704_charger_detect(struct isp1704_charger *isp)
+{
+ unsigned long timeout;
+ u8 pwr_ctrl;
+ int ret = 0;
+
+ pwr_ctrl = isp1704_read(isp, ISP1704_PWR_CTRL);
+
+ /* set SW control bit in PWR_CTRL register */
+ isp1704_write(isp, ISP1704_PWR_CTRL,
+ ISP1704_PWR_CTRL_SWCTRL);
+
+ /* enable manual charger detection */
+ isp1704_write(isp, ULPI_SET(ISP1704_PWR_CTRL),
+ ISP1704_PWR_CTRL_SWCTRL
+ | ISP1704_PWR_CTRL_DPVSRC_EN);
+ usleep_range(1000, 2000);
+
+ timeout = jiffies + msecs_to_jiffies(300);
+ do {
+ /* Check if there is a charger */
+ if (isp1704_read(isp, ISP1704_PWR_CTRL)
+ & ISP1704_PWR_CTRL_VDAT_DET) {
+ ret = isp1704_charger_verify(isp);
+ break;
+ }
+ } while (!time_after(jiffies, timeout) && isp->online);
+
+ /* recover original state */
+ isp1704_write(isp, ISP1704_PWR_CTRL, pwr_ctrl);
+
+ return ret;
+}
+
+static inline int isp1704_charger_detect_dcp(struct isp1704_charger *isp)
+{
+ if (isp1704_charger_detect(isp) &&
+ isp1704_charger_type(isp) == POWER_SUPPLY_TYPE_USB_DCP)
+ return true;
+ else
+ return false;
+}
+
+static void isp1704_charger_work(struct work_struct *data)
+{
+ struct isp1704_charger *isp =
+ container_of(data, struct isp1704_charger, work);
+ static DEFINE_MUTEX(lock);
+
+ mutex_lock(&lock);
+
+ switch (isp->phy->last_event) {
+ case USB_EVENT_VBUS:
+ /* do not call wall charger detection more times */
+ if (!isp->present) {
+ isp->online = true;
+ isp->present = 1;
+ isp1704_charger_set_power(isp, 1);
+
+ /* detect wall charger */
+ if (isp1704_charger_detect_dcp(isp)) {
+ isp->psy_desc.type = POWER_SUPPLY_TYPE_USB_DCP;
+ isp->current_max = 1800;
+ } else {
+ isp->psy_desc.type = POWER_SUPPLY_TYPE_USB;
+ isp->current_max = 500;
+ }
+
+ /* enable data pullups */
+ if (isp->phy->otg->gadget)
+ usb_gadget_connect(isp->phy->otg->gadget);
+ }
+
+ if (isp->psy_desc.type != POWER_SUPPLY_TYPE_USB_DCP) {
+ /*
+ * Only 500mA here or high speed chirp
+ * handshaking may break
+ */
+ if (isp->current_max > 500)
+ isp->current_max = 500;
+
+ if (isp->current_max > 100)
+ isp->psy_desc.type = POWER_SUPPLY_TYPE_USB_CDP;
+ }
+ break;
+ case USB_EVENT_NONE:
+ isp->online = false;
+ isp->present = 0;
+ isp->current_max = 0;
+ isp->psy_desc.type = POWER_SUPPLY_TYPE_USB;
+
+ /*
+ * Disable data pullups. We need to prevent the controller from
+ * enumerating.
+ *
+ * FIXME: This is here to allow charger detection with Host/HUB
+ * chargers. The pullups may be enabled elsewhere, so this can
+ * not be the final solution.
+ */
+ if (isp->phy->otg->gadget)
+ usb_gadget_disconnect(isp->phy->otg->gadget);
+
+ isp1704_charger_set_power(isp, 0);
+ break;
+ default:
+ goto out;
+ }
+
+ power_supply_changed(isp->psy);
+out:
+ mutex_unlock(&lock);
+}
+
+static int isp1704_notifier_call(struct notifier_block *nb,
+ unsigned long val, void *v)
+{
+ struct isp1704_charger *isp =
+ container_of(nb, struct isp1704_charger, nb);
+
+ schedule_work(&isp->work);
+
+ return NOTIFY_OK;
+}
+
+static int isp1704_charger_get_property(struct power_supply *psy,
+ enum power_supply_property psp,
+ union power_supply_propval *val)
+{
+ struct isp1704_charger *isp = power_supply_get_drvdata(psy);
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_PRESENT:
+ val->intval = isp->present;
+ break;
+ case POWER_SUPPLY_PROP_ONLINE:
+ val->intval = isp->online;
+ break;
+ case POWER_SUPPLY_PROP_CURRENT_MAX:
+ val->intval = isp->current_max;
+ break;
+ case POWER_SUPPLY_PROP_MODEL_NAME:
+ val->strval = isp->model;
+ break;
+ case POWER_SUPPLY_PROP_MANUFACTURER:
+ val->strval = "NXP";
+ break;
+ default:
+ return -EINVAL;
+ }
+ return 0;
+}
+
+static enum power_supply_property power_props[] = {
+ POWER_SUPPLY_PROP_PRESENT,
+ POWER_SUPPLY_PROP_ONLINE,
+ POWER_SUPPLY_PROP_CURRENT_MAX,
+ POWER_SUPPLY_PROP_MODEL_NAME,
+ POWER_SUPPLY_PROP_MANUFACTURER,
+};
+
+static inline int isp1704_test_ulpi(struct isp1704_charger *isp)
+{
+ int vendor;
+ int product;
+ int i;
+ int ret;
+
+ /* Test ULPI interface */
+ ret = isp1704_write(isp, ULPI_SCRATCH, 0xaa);
+ if (ret < 0)
+ return ret;
+
+ ret = isp1704_read(isp, ULPI_SCRATCH);
+ if (ret < 0)
+ return ret;
+
+ if (ret != 0xaa)
+ return -ENODEV;
+
+ /* Verify the product and vendor id matches */
+ vendor = isp1704_read(isp, ULPI_VENDOR_ID_LOW);
+ vendor |= isp1704_read(isp, ULPI_VENDOR_ID_HIGH) << 8;
+ if (vendor != NXP_VENDOR_ID)
+ return -ENODEV;
+
+ product = isp1704_read(isp, ULPI_PRODUCT_ID_LOW);
+ product |= isp1704_read(isp, ULPI_PRODUCT_ID_HIGH) << 8;
+
+ for (i = 0; i < ARRAY_SIZE(isp170x_id); i++) {
+ if (product == isp170x_id[i]) {
+ sprintf(isp->model, "isp%x", product);
+ return product;
+ }
+ }
+
+ dev_err(isp->dev, "product id %x not matching known ids", product);
+
+ return -ENODEV;
+}
+
+static int isp1704_charger_probe(struct platform_device *pdev)
+{
+ struct isp1704_charger *isp;
+ int ret = -ENODEV;
+ struct power_supply_config psy_cfg = {};
+
+ isp = devm_kzalloc(&pdev->dev, sizeof(*isp), GFP_KERNEL);
+ if (!isp)
+ return -ENOMEM;
+
+ isp->enable_gpio = devm_gpiod_get(&pdev->dev, "nxp,enable",
+ GPIOD_OUT_HIGH);
+ if (IS_ERR(isp->enable_gpio)) {
+ ret = PTR_ERR(isp->enable_gpio);
+ dev_err(&pdev->dev, "Could not get reset gpio: %d\n", ret);
+ return ret;
+ }
+
+ if (pdev->dev.of_node)
+ isp->phy = devm_usb_get_phy_by_phandle(&pdev->dev, "usb-phy", 0);
+ else
+ isp->phy = devm_usb_get_phy(&pdev->dev, USB_PHY_TYPE_USB2);
+
+ if (IS_ERR(isp->phy)) {
+ ret = PTR_ERR(isp->phy);
+ dev_err(&pdev->dev, "usb_get_phy failed\n");
+ goto fail0;
+ }
+
+ isp->dev = &pdev->dev;
+ platform_set_drvdata(pdev, isp);
+
+ isp1704_charger_set_power(isp, 1);
+
+ ret = isp1704_test_ulpi(isp);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "isp1704_test_ulpi failed\n");
+ goto fail1;
+ }
+
+ isp->psy_desc.name = "isp1704";
+ isp->psy_desc.type = POWER_SUPPLY_TYPE_USB;
+ isp->psy_desc.properties = power_props;
+ isp->psy_desc.num_properties = ARRAY_SIZE(power_props);
+ isp->psy_desc.get_property = isp1704_charger_get_property;
+
+ psy_cfg.drv_data = isp;
+
+ isp->psy = power_supply_register(isp->dev, &isp->psy_desc, &psy_cfg);
+ if (IS_ERR(isp->psy)) {
+ ret = PTR_ERR(isp->psy);
+ dev_err(&pdev->dev, "power_supply_register failed\n");
+ goto fail1;
+ }
+
+ /*
+ * REVISIT: using work in order to allow the usb notifications to be
+ * made atomically in the future.
+ */
+ INIT_WORK(&isp->work, isp1704_charger_work);
+
+ isp->nb.notifier_call = isp1704_notifier_call;
+
+ ret = usb_register_notifier(isp->phy, &isp->nb);
+ if (ret) {
+ dev_err(&pdev->dev, "usb_register_notifier failed\n");
+ goto fail2;
+ }
+
+ dev_info(isp->dev, "registered with product id %s\n", isp->model);
+
+ /*
+ * Taking over the D+ pullup.
+ *
+ * FIXME: The device will be disconnected if it was already
+ * enumerated. The charger driver should be always loaded before any
+ * gadget is loaded.
+ */
+ if (isp->phy->otg->gadget)
+ usb_gadget_disconnect(isp->phy->otg->gadget);
+
+ if (isp->phy->last_event == USB_EVENT_NONE)
+ isp1704_charger_set_power(isp, 0);
+
+ /* Detect charger if VBUS is valid (the cable was already plugged). */
+ if (isp->phy->last_event == USB_EVENT_VBUS &&
+ !isp->phy->otg->default_a)
+ schedule_work(&isp->work);
+
+ return 0;
+fail2:
+ power_supply_unregister(isp->psy);
+fail1:
+ isp1704_charger_set_power(isp, 0);
+fail0:
+ dev_err(&pdev->dev, "failed to register isp1704 with error %d\n", ret);
+
+ return ret;
+}
+
+static int isp1704_charger_remove(struct platform_device *pdev)
+{
+ struct isp1704_charger *isp = platform_get_drvdata(pdev);
+
+ usb_unregister_notifier(isp->phy, &isp->nb);
+ power_supply_unregister(isp->psy);
+ isp1704_charger_set_power(isp, 0);
+
+ return 0;
+}
+
+#ifdef CONFIG_OF
+static const struct of_device_id omap_isp1704_of_match[] = {
+ { .compatible = "nxp,isp1704", },
+ { .compatible = "nxp,isp1707", },
+ {},
+};
+MODULE_DEVICE_TABLE(of, omap_isp1704_of_match);
+#endif
+
+static struct platform_driver isp1704_charger_driver = {
+ .driver = {
+ .name = "isp1704_charger",
+ .of_match_table = of_match_ptr(omap_isp1704_of_match),
+ },
+ .probe = isp1704_charger_probe,
+ .remove = isp1704_charger_remove,
+};
+
+module_platform_driver(isp1704_charger_driver);
+
+MODULE_ALIAS("platform:isp1704_charger");
+MODULE_AUTHOR("Nokia Corporation");
+MODULE_DESCRIPTION("ISP170x USB Charger driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/power/supply/lego_ev3_battery.c b/drivers/power/supply/lego_ev3_battery.c
new file mode 100644
index 000000000..ccb00be38
--- /dev/null
+++ b/drivers/power/supply/lego_ev3_battery.c
@@ -0,0 +1,232 @@
+/*
+ * Battery driver for LEGO MINDSTORMS EV3
+ *
+ * Copyright (C) 2017 David Lechner <david@lechnology.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/gpio/consumer.h>
+#include <linux/iio/consumer.h>
+#include <linux/iio/types.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/power_supply.h>
+
+struct lego_ev3_battery {
+ struct iio_channel *iio_v;
+ struct iio_channel *iio_i;
+ struct gpio_desc *rechargeable_gpio;
+ struct power_supply *psy;
+ int technology;
+ int v_max;
+ int v_min;
+};
+
+static int lego_ev3_battery_get_property(struct power_supply *psy,
+ enum power_supply_property psp,
+ union power_supply_propval *val)
+{
+ struct lego_ev3_battery *batt = power_supply_get_drvdata(psy);
+ int ret, val2;
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_TECHNOLOGY:
+ val->intval = batt->technology;
+ break;
+ case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+ /* battery voltage is iio channel * 2 + Vce of transistor */
+ ret = iio_read_channel_processed(batt->iio_v, &val->intval);
+ if (ret)
+ return ret;
+
+ val->intval *= 2000;
+ val->intval += 50000;
+
+ /* plus adjust for shunt resistor drop */
+ ret = iio_read_channel_processed(batt->iio_i, &val2);
+ if (ret)
+ return ret;
+
+ val2 *= 1000;
+ val2 /= 15;
+ val->intval += val2;
+ break;
+ case POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN:
+ val->intval = batt->v_max;
+ break;
+ case POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN:
+ val->intval = batt->v_min;
+ break;
+ case POWER_SUPPLY_PROP_CURRENT_NOW:
+ /* battery current is iio channel / 15 / 0.05 ohms */
+ ret = iio_read_channel_processed(batt->iio_i, &val->intval);
+ if (ret)
+ return ret;
+
+ val->intval *= 20000;
+ val->intval /= 15;
+ break;
+ case POWER_SUPPLY_PROP_SCOPE:
+ val->intval = POWER_SUPPLY_SCOPE_SYSTEM;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int lego_ev3_battery_set_property(struct power_supply *psy,
+ enum power_supply_property psp,
+ const union power_supply_propval *val)
+{
+ struct lego_ev3_battery *batt = power_supply_get_drvdata(psy);
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_TECHNOLOGY:
+ /*
+ * Only allow changing technology from Unknown to NiMH. Li-ion
+ * batteries are automatically detected and should not be
+ * overridden. Rechargeable AA batteries, on the other hand,
+ * cannot be automatically detected, and so must be manually
+ * specified. This should only be set once during system init,
+ * so there is no mechanism to go back to Unknown.
+ */
+ if (batt->technology != POWER_SUPPLY_TECHNOLOGY_UNKNOWN)
+ return -EINVAL;
+ switch (val->intval) {
+ case POWER_SUPPLY_TECHNOLOGY_NiMH:
+ batt->technology = POWER_SUPPLY_TECHNOLOGY_NiMH;
+ batt->v_max = 7800000;
+ batt->v_min = 5400000;
+ break;
+ default:
+ return -EINVAL;
+ }
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int lego_ev3_battery_property_is_writeable(struct power_supply *psy,
+ enum power_supply_property psp)
+{
+ struct lego_ev3_battery *batt = power_supply_get_drvdata(psy);
+
+ return psp == POWER_SUPPLY_PROP_TECHNOLOGY &&
+ batt->technology == POWER_SUPPLY_TECHNOLOGY_UNKNOWN;
+}
+
+static enum power_supply_property lego_ev3_battery_props[] = {
+ POWER_SUPPLY_PROP_TECHNOLOGY,
+ POWER_SUPPLY_PROP_VOLTAGE_NOW,
+ POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN,
+ POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN,
+ POWER_SUPPLY_PROP_CURRENT_NOW,
+ POWER_SUPPLY_PROP_SCOPE,
+};
+
+static const struct power_supply_desc lego_ev3_battery_desc = {
+ .name = "lego-ev3-battery",
+ .type = POWER_SUPPLY_TYPE_BATTERY,
+ .properties = lego_ev3_battery_props,
+ .num_properties = ARRAY_SIZE(lego_ev3_battery_props),
+ .get_property = lego_ev3_battery_get_property,
+ .set_property = lego_ev3_battery_set_property,
+ .property_is_writeable = lego_ev3_battery_property_is_writeable,
+};
+
+static int lego_ev3_battery_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct lego_ev3_battery *batt;
+ struct power_supply_config psy_cfg = {};
+ int err;
+
+ batt = devm_kzalloc(dev, sizeof(*batt), GFP_KERNEL);
+ if (!batt)
+ return -ENOMEM;
+
+ platform_set_drvdata(pdev, batt);
+
+ batt->iio_v = devm_iio_channel_get(dev, "voltage");
+ err = PTR_ERR_OR_ZERO(batt->iio_v);
+ if (err)
+ return dev_err_probe(dev, err,
+ "Failed to get voltage iio channel\n");
+
+ batt->iio_i = devm_iio_channel_get(dev, "current");
+ err = PTR_ERR_OR_ZERO(batt->iio_i);
+ if (err)
+ return dev_err_probe(dev, err,
+ "Failed to get current iio channel\n");
+
+ batt->rechargeable_gpio = devm_gpiod_get(dev, "rechargeable", GPIOD_IN);
+ err = PTR_ERR_OR_ZERO(batt->rechargeable_gpio);
+ if (err)
+ return dev_err_probe(dev, err,
+ "Failed to get rechargeable gpio\n");
+
+ /*
+ * The rechargeable battery indication switch cannot be changed without
+ * removing the battery, so we only need to read it once.
+ */
+ if (gpiod_get_value(batt->rechargeable_gpio)) {
+ /* 2-cell Li-ion, 7.4V nominal */
+ batt->technology = POWER_SUPPLY_TECHNOLOGY_LION;
+ batt->v_max = 84000000;
+ batt->v_min = 60000000;
+ } else {
+ /* 6x AA Alkaline, 9V nominal */
+ batt->technology = POWER_SUPPLY_TECHNOLOGY_UNKNOWN;
+ batt->v_max = 90000000;
+ batt->v_min = 48000000;
+ }
+
+ psy_cfg.of_node = pdev->dev.of_node;
+ psy_cfg.drv_data = batt;
+
+ batt->psy = devm_power_supply_register(dev, &lego_ev3_battery_desc,
+ &psy_cfg);
+ err = PTR_ERR_OR_ZERO(batt->psy);
+ if (err) {
+ dev_err(dev, "failed to register power supply\n");
+ return err;
+ }
+
+ return 0;
+}
+
+static const struct of_device_id of_lego_ev3_battery_match[] = {
+ { .compatible = "lego,ev3-battery", },
+ { }
+};
+MODULE_DEVICE_TABLE(of, of_lego_ev3_battery_match);
+
+static struct platform_driver lego_ev3_battery_driver = {
+ .driver = {
+ .name = "lego-ev3-battery",
+ .of_match_table = of_lego_ev3_battery_match,
+ },
+ .probe = lego_ev3_battery_probe,
+};
+module_platform_driver(lego_ev3_battery_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("David Lechner <david@lechnology.com>");
+MODULE_DESCRIPTION("LEGO MINDSTORMS EV3 Battery Driver");
diff --git a/drivers/power/supply/lp8727_charger.c b/drivers/power/supply/lp8727_charger.c
new file mode 100644
index 000000000..9ee54e397
--- /dev/null
+++ b/drivers/power/supply/lp8727_charger.c
@@ -0,0 +1,627 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Driver for LP8727 Micro/Mini USB IC with integrated charger
+ *
+ * Copyright (C) 2011 Texas Instruments
+ * Copyright (C) 2011 National Semiconductor
+ */
+
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/i2c.h>
+#include <linux/power_supply.h>
+#include <linux/platform_data/lp8727.h>
+#include <linux/of.h>
+
+#define LP8788_NUM_INTREGS 2
+#define DEFAULT_DEBOUNCE_MSEC 270
+
+/* Registers */
+#define LP8727_CTRL1 0x1
+#define LP8727_CTRL2 0x2
+#define LP8727_SWCTRL 0x3
+#define LP8727_INT1 0x4
+#define LP8727_INT2 0x5
+#define LP8727_STATUS1 0x6
+#define LP8727_STATUS2 0x7
+#define LP8727_CHGCTRL2 0x9
+
+/* CTRL1 register */
+#define LP8727_CP_EN BIT(0)
+#define LP8727_ADC_EN BIT(1)
+#define LP8727_ID200_EN BIT(4)
+
+/* CTRL2 register */
+#define LP8727_CHGDET_EN BIT(1)
+#define LP8727_INT_EN BIT(6)
+
+/* SWCTRL register */
+#define LP8727_SW_DM1_DM (0x0 << 0)
+#define LP8727_SW_DM1_HiZ (0x7 << 0)
+#define LP8727_SW_DP2_DP (0x0 << 3)
+#define LP8727_SW_DP2_HiZ (0x7 << 3)
+
+/* INT1 register */
+#define LP8727_IDNO (0xF << 0)
+#define LP8727_VBUS BIT(4)
+
+/* STATUS1 register */
+#define LP8727_CHGSTAT (3 << 4)
+#define LP8727_CHPORT BIT(6)
+#define LP8727_DCPORT BIT(7)
+#define LP8727_STAT_EOC 0x30
+
+/* STATUS2 register */
+#define LP8727_TEMP_STAT (3 << 5)
+#define LP8727_TEMP_SHIFT 5
+
+/* CHGCTRL2 register */
+#define LP8727_ICHG_SHIFT 4
+
+enum lp8727_dev_id {
+ LP8727_ID_NONE,
+ LP8727_ID_TA,
+ LP8727_ID_DEDICATED_CHG,
+ LP8727_ID_USB_CHG,
+ LP8727_ID_USB_DS,
+ LP8727_ID_MAX,
+};
+
+enum lp8727_die_temp {
+ LP8788_TEMP_75C,
+ LP8788_TEMP_95C,
+ LP8788_TEMP_115C,
+ LP8788_TEMP_135C,
+};
+
+struct lp8727_psy {
+ struct power_supply *ac;
+ struct power_supply *usb;
+ struct power_supply *batt;
+};
+
+struct lp8727_chg {
+ struct device *dev;
+ struct i2c_client *client;
+ struct mutex xfer_lock;
+ struct lp8727_psy *psy;
+ struct lp8727_platform_data *pdata;
+
+ /* Charger Data */
+ enum lp8727_dev_id devid;
+ struct lp8727_chg_param *chg_param;
+
+ /* Interrupt Handling */
+ int irq;
+ struct delayed_work work;
+ unsigned long debounce_jiffies;
+};
+
+static int lp8727_read_bytes(struct lp8727_chg *pchg, u8 reg, u8 *data, u8 len)
+{
+ s32 ret;
+
+ mutex_lock(&pchg->xfer_lock);
+ ret = i2c_smbus_read_i2c_block_data(pchg->client, reg, len, data);
+ mutex_unlock(&pchg->xfer_lock);
+
+ return (ret != len) ? -EIO : 0;
+}
+
+static inline int lp8727_read_byte(struct lp8727_chg *pchg, u8 reg, u8 *data)
+{
+ return lp8727_read_bytes(pchg, reg, data, 1);
+}
+
+static int lp8727_write_byte(struct lp8727_chg *pchg, u8 reg, u8 data)
+{
+ int ret;
+
+ mutex_lock(&pchg->xfer_lock);
+ ret = i2c_smbus_write_byte_data(pchg->client, reg, data);
+ mutex_unlock(&pchg->xfer_lock);
+
+ return ret;
+}
+
+static bool lp8727_is_charger_attached(const char *name, int id)
+{
+ if (!strcmp(name, "ac"))
+ return id == LP8727_ID_TA || id == LP8727_ID_DEDICATED_CHG;
+ else if (!strcmp(name, "usb"))
+ return id == LP8727_ID_USB_CHG;
+
+ return id >= LP8727_ID_TA && id <= LP8727_ID_USB_CHG;
+}
+
+static int lp8727_init_device(struct lp8727_chg *pchg)
+{
+ u8 val;
+ int ret;
+ u8 intstat[LP8788_NUM_INTREGS];
+
+ /* clear interrupts */
+ ret = lp8727_read_bytes(pchg, LP8727_INT1, intstat, LP8788_NUM_INTREGS);
+ if (ret)
+ return ret;
+
+ val = LP8727_ID200_EN | LP8727_ADC_EN | LP8727_CP_EN;
+ ret = lp8727_write_byte(pchg, LP8727_CTRL1, val);
+ if (ret)
+ return ret;
+
+ val = LP8727_INT_EN | LP8727_CHGDET_EN;
+ return lp8727_write_byte(pchg, LP8727_CTRL2, val);
+}
+
+static int lp8727_is_dedicated_charger(struct lp8727_chg *pchg)
+{
+ u8 val;
+
+ lp8727_read_byte(pchg, LP8727_STATUS1, &val);
+ return val & LP8727_DCPORT;
+}
+
+static int lp8727_is_usb_charger(struct lp8727_chg *pchg)
+{
+ u8 val;
+
+ lp8727_read_byte(pchg, LP8727_STATUS1, &val);
+ return val & LP8727_CHPORT;
+}
+
+static inline void lp8727_ctrl_switch(struct lp8727_chg *pchg, u8 sw)
+{
+ lp8727_write_byte(pchg, LP8727_SWCTRL, sw);
+}
+
+static void lp8727_id_detection(struct lp8727_chg *pchg, u8 id, int vbusin)
+{
+ struct lp8727_platform_data *pdata = pchg->pdata;
+ u8 devid = LP8727_ID_NONE;
+ u8 swctrl = LP8727_SW_DM1_HiZ | LP8727_SW_DP2_HiZ;
+
+ switch (id) {
+ case 0x5:
+ devid = LP8727_ID_TA;
+ pchg->chg_param = pdata ? pdata->ac : NULL;
+ break;
+ case 0xB:
+ if (lp8727_is_dedicated_charger(pchg)) {
+ pchg->chg_param = pdata ? pdata->ac : NULL;
+ devid = LP8727_ID_DEDICATED_CHG;
+ } else if (lp8727_is_usb_charger(pchg)) {
+ pchg->chg_param = pdata ? pdata->usb : NULL;
+ devid = LP8727_ID_USB_CHG;
+ swctrl = LP8727_SW_DM1_DM | LP8727_SW_DP2_DP;
+ } else if (vbusin) {
+ devid = LP8727_ID_USB_DS;
+ swctrl = LP8727_SW_DM1_DM | LP8727_SW_DP2_DP;
+ }
+ break;
+ default:
+ devid = LP8727_ID_NONE;
+ pchg->chg_param = NULL;
+ break;
+ }
+
+ pchg->devid = devid;
+ lp8727_ctrl_switch(pchg, swctrl);
+}
+
+static void lp8727_enable_chgdet(struct lp8727_chg *pchg)
+{
+ u8 val;
+
+ lp8727_read_byte(pchg, LP8727_CTRL2, &val);
+ val |= LP8727_CHGDET_EN;
+ lp8727_write_byte(pchg, LP8727_CTRL2, val);
+}
+
+static void lp8727_delayed_func(struct work_struct *_work)
+{
+ struct lp8727_chg *pchg = container_of(_work, struct lp8727_chg,
+ work.work);
+ u8 intstat[LP8788_NUM_INTREGS];
+ u8 idno;
+ u8 vbus;
+
+ if (lp8727_read_bytes(pchg, LP8727_INT1, intstat, LP8788_NUM_INTREGS)) {
+ dev_err(pchg->dev, "can not read INT registers\n");
+ return;
+ }
+
+ idno = intstat[0] & LP8727_IDNO;
+ vbus = intstat[0] & LP8727_VBUS;
+
+ lp8727_id_detection(pchg, idno, vbus);
+ lp8727_enable_chgdet(pchg);
+
+ power_supply_changed(pchg->psy->ac);
+ power_supply_changed(pchg->psy->usb);
+ power_supply_changed(pchg->psy->batt);
+}
+
+static irqreturn_t lp8727_isr_func(int irq, void *ptr)
+{
+ struct lp8727_chg *pchg = ptr;
+
+ schedule_delayed_work(&pchg->work, pchg->debounce_jiffies);
+ return IRQ_HANDLED;
+}
+
+static int lp8727_setup_irq(struct lp8727_chg *pchg)
+{
+ int ret;
+ int irq = pchg->client->irq;
+ unsigned delay_msec = pchg->pdata ? pchg->pdata->debounce_msec :
+ DEFAULT_DEBOUNCE_MSEC;
+
+ INIT_DELAYED_WORK(&pchg->work, lp8727_delayed_func);
+
+ if (irq <= 0) {
+ dev_warn(pchg->dev, "invalid irq number: %d\n", irq);
+ return 0;
+ }
+
+ ret = request_threaded_irq(irq, NULL, lp8727_isr_func,
+ IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
+ "lp8727_irq", pchg);
+
+ if (ret)
+ return ret;
+
+ pchg->irq = irq;
+ pchg->debounce_jiffies = msecs_to_jiffies(delay_msec);
+
+ return 0;
+}
+
+static void lp8727_release_irq(struct lp8727_chg *pchg)
+{
+ cancel_delayed_work_sync(&pchg->work);
+
+ if (pchg->irq)
+ free_irq(pchg->irq, pchg);
+}
+
+static enum power_supply_property lp8727_charger_prop[] = {
+ POWER_SUPPLY_PROP_ONLINE,
+};
+
+static enum power_supply_property lp8727_battery_prop[] = {
+ POWER_SUPPLY_PROP_STATUS,
+ POWER_SUPPLY_PROP_HEALTH,
+ POWER_SUPPLY_PROP_PRESENT,
+ POWER_SUPPLY_PROP_VOLTAGE_NOW,
+ POWER_SUPPLY_PROP_CAPACITY,
+ POWER_SUPPLY_PROP_TEMP,
+};
+
+static char *battery_supplied_to[] = {
+ "main_batt",
+};
+
+static int lp8727_charger_get_property(struct power_supply *psy,
+ enum power_supply_property psp,
+ union power_supply_propval *val)
+{
+ struct lp8727_chg *pchg = dev_get_drvdata(psy->dev.parent);
+
+ if (psp != POWER_SUPPLY_PROP_ONLINE)
+ return -EINVAL;
+
+ val->intval = lp8727_is_charger_attached(psy->desc->name, pchg->devid);
+
+ return 0;
+}
+
+static bool lp8727_is_high_temperature(enum lp8727_die_temp temp)
+{
+ switch (temp) {
+ case LP8788_TEMP_95C:
+ case LP8788_TEMP_115C:
+ case LP8788_TEMP_135C:
+ return true;
+ default:
+ return false;
+ }
+}
+
+static int lp8727_battery_get_property(struct power_supply *psy,
+ enum power_supply_property psp,
+ union power_supply_propval *val)
+{
+ struct lp8727_chg *pchg = dev_get_drvdata(psy->dev.parent);
+ struct lp8727_platform_data *pdata = pchg->pdata;
+ enum lp8727_die_temp temp;
+ u8 read;
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_STATUS:
+ if (!lp8727_is_charger_attached(psy->desc->name, pchg->devid)) {
+ val->intval = POWER_SUPPLY_STATUS_DISCHARGING;
+ return 0;
+ }
+
+ lp8727_read_byte(pchg, LP8727_STATUS1, &read);
+
+ val->intval = (read & LP8727_CHGSTAT) == LP8727_STAT_EOC ?
+ POWER_SUPPLY_STATUS_FULL :
+ POWER_SUPPLY_STATUS_CHARGING;
+ break;
+ case POWER_SUPPLY_PROP_HEALTH:
+ lp8727_read_byte(pchg, LP8727_STATUS2, &read);
+ temp = (read & LP8727_TEMP_STAT) >> LP8727_TEMP_SHIFT;
+
+ val->intval = lp8727_is_high_temperature(temp) ?
+ POWER_SUPPLY_HEALTH_OVERHEAT :
+ POWER_SUPPLY_HEALTH_GOOD;
+ break;
+ case POWER_SUPPLY_PROP_PRESENT:
+ if (!pdata)
+ return -EINVAL;
+
+ if (pdata->get_batt_present)
+ val->intval = pdata->get_batt_present();
+ break;
+ case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+ if (!pdata)
+ return -EINVAL;
+
+ if (pdata->get_batt_level)
+ val->intval = pdata->get_batt_level();
+ break;
+ case POWER_SUPPLY_PROP_CAPACITY:
+ if (!pdata)
+ return -EINVAL;
+
+ if (pdata->get_batt_capacity)
+ val->intval = pdata->get_batt_capacity();
+ break;
+ case POWER_SUPPLY_PROP_TEMP:
+ if (!pdata)
+ return -EINVAL;
+
+ if (pdata->get_batt_temp)
+ val->intval = pdata->get_batt_temp();
+ break;
+ default:
+ break;
+ }
+
+ return 0;
+}
+
+static void lp8727_charger_changed(struct power_supply *psy)
+{
+ struct lp8727_chg *pchg = dev_get_drvdata(psy->dev.parent);
+ u8 eoc_level;
+ u8 ichg;
+ u8 val;
+
+ /* skip if no charger exists */
+ if (!lp8727_is_charger_attached(psy->desc->name, pchg->devid))
+ return;
+
+ /* update charging parameters */
+ if (pchg->chg_param) {
+ eoc_level = pchg->chg_param->eoc_level;
+ ichg = pchg->chg_param->ichg;
+ val = (ichg << LP8727_ICHG_SHIFT) | eoc_level;
+ lp8727_write_byte(pchg, LP8727_CHGCTRL2, val);
+ }
+}
+
+static const struct power_supply_desc lp8727_ac_desc = {
+ .name = "ac",
+ .type = POWER_SUPPLY_TYPE_MAINS,
+ .properties = lp8727_charger_prop,
+ .num_properties = ARRAY_SIZE(lp8727_charger_prop),
+ .get_property = lp8727_charger_get_property,
+};
+
+static const struct power_supply_desc lp8727_usb_desc = {
+ .name = "usb",
+ .type = POWER_SUPPLY_TYPE_USB,
+ .properties = lp8727_charger_prop,
+ .num_properties = ARRAY_SIZE(lp8727_charger_prop),
+ .get_property = lp8727_charger_get_property,
+};
+
+static const struct power_supply_desc lp8727_batt_desc = {
+ .name = "main_batt",
+ .type = POWER_SUPPLY_TYPE_BATTERY,
+ .properties = lp8727_battery_prop,
+ .num_properties = ARRAY_SIZE(lp8727_battery_prop),
+ .get_property = lp8727_battery_get_property,
+ .external_power_changed = lp8727_charger_changed,
+};
+
+static int lp8727_register_psy(struct lp8727_chg *pchg)
+{
+ struct power_supply_config psy_cfg = {}; /* Only for ac and usb */
+ struct lp8727_psy *psy;
+
+ psy = devm_kzalloc(pchg->dev, sizeof(*psy), GFP_KERNEL);
+ if (!psy)
+ return -ENOMEM;
+
+ pchg->psy = psy;
+
+ psy_cfg.supplied_to = battery_supplied_to;
+ psy_cfg.num_supplicants = ARRAY_SIZE(battery_supplied_to);
+
+ psy->ac = power_supply_register(pchg->dev, &lp8727_ac_desc, &psy_cfg);
+ if (IS_ERR(psy->ac))
+ goto err_psy_ac;
+
+ psy->usb = power_supply_register(pchg->dev, &lp8727_usb_desc,
+ &psy_cfg);
+ if (IS_ERR(psy->usb))
+ goto err_psy_usb;
+
+ psy->batt = power_supply_register(pchg->dev, &lp8727_batt_desc, NULL);
+ if (IS_ERR(psy->batt))
+ goto err_psy_batt;
+
+ return 0;
+
+err_psy_batt:
+ power_supply_unregister(psy->usb);
+err_psy_usb:
+ power_supply_unregister(psy->ac);
+err_psy_ac:
+ return -EPERM;
+}
+
+static void lp8727_unregister_psy(struct lp8727_chg *pchg)
+{
+ struct lp8727_psy *psy = pchg->psy;
+
+ if (!psy)
+ return;
+
+ power_supply_unregister(psy->ac);
+ power_supply_unregister(psy->usb);
+ power_supply_unregister(psy->batt);
+}
+
+#ifdef CONFIG_OF
+static struct lp8727_chg_param
+*lp8727_parse_charge_pdata(struct device *dev, struct device_node *np)
+{
+ struct lp8727_chg_param *param;
+
+ param = devm_kzalloc(dev, sizeof(*param), GFP_KERNEL);
+ if (!param)
+ goto out;
+
+ of_property_read_u8(np, "eoc-level", (u8 *)&param->eoc_level);
+ of_property_read_u8(np, "charging-current", (u8 *)&param->ichg);
+out:
+ return param;
+}
+
+static struct lp8727_platform_data *lp8727_parse_dt(struct device *dev)
+{
+ struct device_node *np = dev->of_node;
+ struct device_node *child;
+ struct lp8727_platform_data *pdata;
+ const char *type;
+
+ pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
+ if (!pdata)
+ return ERR_PTR(-ENOMEM);
+
+ of_property_read_u32(np, "debounce-ms", &pdata->debounce_msec);
+
+ /* If charging parameter is not defined, just skip parsing the dt */
+ if (of_get_child_count(np) == 0)
+ return pdata;
+
+ for_each_child_of_node(np, child) {
+ of_property_read_string(child, "charger-type", &type);
+
+ if (!strcmp(type, "ac"))
+ pdata->ac = lp8727_parse_charge_pdata(dev, child);
+
+ if (!strcmp(type, "usb"))
+ pdata->usb = lp8727_parse_charge_pdata(dev, child);
+ }
+
+ return pdata;
+}
+#else
+static struct lp8727_platform_data *lp8727_parse_dt(struct device *dev)
+{
+ return NULL;
+}
+#endif
+
+static int lp8727_probe(struct i2c_client *cl, const struct i2c_device_id *id)
+{
+ struct lp8727_chg *pchg;
+ struct lp8727_platform_data *pdata;
+ int ret;
+
+ if (!i2c_check_functionality(cl->adapter, I2C_FUNC_SMBUS_I2C_BLOCK))
+ return -EIO;
+
+ if (cl->dev.of_node) {
+ pdata = lp8727_parse_dt(&cl->dev);
+ if (IS_ERR(pdata))
+ return PTR_ERR(pdata);
+ } else {
+ pdata = dev_get_platdata(&cl->dev);
+ }
+
+ pchg = devm_kzalloc(&cl->dev, sizeof(*pchg), GFP_KERNEL);
+ if (!pchg)
+ return -ENOMEM;
+
+ pchg->client = cl;
+ pchg->dev = &cl->dev;
+ pchg->pdata = pdata;
+ i2c_set_clientdata(cl, pchg);
+
+ mutex_init(&pchg->xfer_lock);
+
+ ret = lp8727_init_device(pchg);
+ if (ret) {
+ dev_err(pchg->dev, "i2c communication err: %d", ret);
+ return ret;
+ }
+
+ ret = lp8727_register_psy(pchg);
+ if (ret) {
+ dev_err(pchg->dev, "power supplies register err: %d", ret);
+ return ret;
+ }
+
+ ret = lp8727_setup_irq(pchg);
+ if (ret) {
+ dev_err(pchg->dev, "irq handler err: %d", ret);
+ lp8727_unregister_psy(pchg);
+ return ret;
+ }
+
+ return 0;
+}
+
+static int lp8727_remove(struct i2c_client *cl)
+{
+ struct lp8727_chg *pchg = i2c_get_clientdata(cl);
+
+ lp8727_release_irq(pchg);
+ lp8727_unregister_psy(pchg);
+ return 0;
+}
+
+static const struct of_device_id lp8727_dt_ids[] = {
+ { .compatible = "ti,lp8727", },
+ { }
+};
+MODULE_DEVICE_TABLE(of, lp8727_dt_ids);
+
+static const struct i2c_device_id lp8727_ids[] = {
+ {"lp8727", 0},
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, lp8727_ids);
+
+static struct i2c_driver lp8727_driver = {
+ .driver = {
+ .name = "lp8727",
+ .of_match_table = of_match_ptr(lp8727_dt_ids),
+ },
+ .probe = lp8727_probe,
+ .remove = lp8727_remove,
+ .id_table = lp8727_ids,
+};
+module_i2c_driver(lp8727_driver);
+
+MODULE_DESCRIPTION("TI/National Semiconductor LP8727 charger driver");
+MODULE_AUTHOR("Milo Kim <milo.kim@ti.com>, Daniel Jeong <daniel.jeong@ti.com>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/power/supply/lp8788-charger.c b/drivers/power/supply/lp8788-charger.c
new file mode 100644
index 000000000..397e5a03b
--- /dev/null
+++ b/drivers/power/supply/lp8788-charger.c
@@ -0,0 +1,741 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * TI LP8788 MFD - battery charger driver
+ *
+ * Copyright 2012 Texas Instruments
+ *
+ * Author: Milo(Woogyom) Kim <milo.kim@ti.com>
+ */
+
+#include <linux/err.h>
+#include <linux/iio/consumer.h>
+#include <linux/interrupt.h>
+#include <linux/irqdomain.h>
+#include <linux/mfd/lp8788.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/power_supply.h>
+#include <linux/slab.h>
+#include <linux/workqueue.h>
+
+/* register address */
+#define LP8788_CHG_STATUS 0x07
+#define LP8788_CHG_IDCIN 0x13
+#define LP8788_CHG_IBATT 0x14
+#define LP8788_CHG_VTERM 0x15
+#define LP8788_CHG_EOC 0x16
+
+/* mask/shift bits */
+#define LP8788_CHG_INPUT_STATE_M 0x03 /* Addr 07h */
+#define LP8788_CHG_STATE_M 0x3C
+#define LP8788_CHG_STATE_S 2
+#define LP8788_NO_BATT_M BIT(6)
+#define LP8788_BAD_BATT_M BIT(7)
+#define LP8788_CHG_IBATT_M 0x1F /* Addr 14h */
+#define LP8788_CHG_VTERM_M 0x0F /* Addr 15h */
+#define LP8788_CHG_EOC_LEVEL_M 0x30 /* Addr 16h */
+#define LP8788_CHG_EOC_LEVEL_S 4
+#define LP8788_CHG_EOC_TIME_M 0x0E
+#define LP8788_CHG_EOC_TIME_S 1
+#define LP8788_CHG_EOC_MODE_M BIT(0)
+
+#define LP8788_CHARGER_NAME "charger"
+#define LP8788_BATTERY_NAME "main_batt"
+
+#define LP8788_CHG_START 0x11
+#define LP8788_CHG_END 0x1C
+
+#define LP8788_ISEL_MAX 23
+#define LP8788_ISEL_STEP 50
+#define LP8788_VTERM_MIN 4100
+#define LP8788_VTERM_STEP 25
+#define LP8788_MAX_BATT_CAPACITY 100
+#define LP8788_MAX_CHG_IRQS 11
+
+enum lp8788_charging_state {
+ LP8788_OFF,
+ LP8788_WARM_UP,
+ LP8788_LOW_INPUT = 0x3,
+ LP8788_PRECHARGE,
+ LP8788_CC,
+ LP8788_CV,
+ LP8788_MAINTENANCE,
+ LP8788_BATTERY_FAULT,
+ LP8788_SYSTEM_SUPPORT = 0xC,
+ LP8788_HIGH_CURRENT = 0xF,
+ LP8788_MAX_CHG_STATE,
+};
+
+enum lp8788_charger_adc_sel {
+ LP8788_VBATT,
+ LP8788_BATT_TEMP,
+ LP8788_NUM_CHG_ADC,
+};
+
+enum lp8788_charger_input_state {
+ LP8788_SYSTEM_SUPPLY = 1,
+ LP8788_FULL_FUNCTION,
+};
+
+/*
+ * struct lp8788_chg_irq
+ * @which : lp8788 interrupt id
+ * @virq : Linux IRQ number from irq_domain
+ */
+struct lp8788_chg_irq {
+ enum lp8788_int_id which;
+ int virq;
+};
+
+/*
+ * struct lp8788_charger
+ * @lp : used for accessing the registers of mfd lp8788 device
+ * @charger : power supply driver for the battery charger
+ * @battery : power supply driver for the battery
+ * @charger_work : work queue for charger input interrupts
+ * @chan : iio channels for getting adc values
+ * eg) battery voltage, capacity and temperature
+ * @irqs : charger dedicated interrupts
+ * @num_irqs : total numbers of charger interrupts
+ * @pdata : charger platform specific data
+ */
+struct lp8788_charger {
+ struct lp8788 *lp;
+ struct power_supply *charger;
+ struct power_supply *battery;
+ struct work_struct charger_work;
+ struct iio_channel *chan[LP8788_NUM_CHG_ADC];
+ struct lp8788_chg_irq irqs[LP8788_MAX_CHG_IRQS];
+ int num_irqs;
+ struct lp8788_charger_platform_data *pdata;
+};
+
+static char *battery_supplied_to[] = {
+ LP8788_BATTERY_NAME,
+};
+
+static enum power_supply_property lp8788_charger_prop[] = {
+ POWER_SUPPLY_PROP_ONLINE,
+ POWER_SUPPLY_PROP_CURRENT_MAX,
+};
+
+static enum power_supply_property lp8788_battery_prop[] = {
+ POWER_SUPPLY_PROP_STATUS,
+ POWER_SUPPLY_PROP_HEALTH,
+ POWER_SUPPLY_PROP_PRESENT,
+ POWER_SUPPLY_PROP_VOLTAGE_NOW,
+ POWER_SUPPLY_PROP_CAPACITY,
+ POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT,
+ POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX,
+ POWER_SUPPLY_PROP_TEMP,
+};
+
+static bool lp8788_is_charger_detected(struct lp8788_charger *pchg)
+{
+ u8 data;
+
+ lp8788_read_byte(pchg->lp, LP8788_CHG_STATUS, &data);
+ data &= LP8788_CHG_INPUT_STATE_M;
+
+ return data == LP8788_SYSTEM_SUPPLY || data == LP8788_FULL_FUNCTION;
+}
+
+static int lp8788_charger_get_property(struct power_supply *psy,
+ enum power_supply_property psp,
+ union power_supply_propval *val)
+{
+ struct lp8788_charger *pchg = dev_get_drvdata(psy->dev.parent);
+ u8 read;
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_ONLINE:
+ val->intval = lp8788_is_charger_detected(pchg);
+ break;
+ case POWER_SUPPLY_PROP_CURRENT_MAX:
+ lp8788_read_byte(pchg->lp, LP8788_CHG_IDCIN, &read);
+ val->intval = LP8788_ISEL_STEP *
+ (min_t(int, read, LP8788_ISEL_MAX) + 1);
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int lp8788_get_battery_status(struct lp8788_charger *pchg,
+ union power_supply_propval *val)
+{
+ enum lp8788_charging_state state;
+ u8 data;
+ int ret;
+
+ ret = lp8788_read_byte(pchg->lp, LP8788_CHG_STATUS, &data);
+ if (ret)
+ return ret;
+
+ state = (data & LP8788_CHG_STATE_M) >> LP8788_CHG_STATE_S;
+ switch (state) {
+ case LP8788_OFF:
+ val->intval = POWER_SUPPLY_STATUS_DISCHARGING;
+ break;
+ case LP8788_PRECHARGE:
+ case LP8788_CC:
+ case LP8788_CV:
+ case LP8788_HIGH_CURRENT:
+ val->intval = POWER_SUPPLY_STATUS_CHARGING;
+ break;
+ case LP8788_MAINTENANCE:
+ val->intval = POWER_SUPPLY_STATUS_FULL;
+ break;
+ default:
+ val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING;
+ break;
+ }
+
+ return 0;
+}
+
+static int lp8788_get_battery_health(struct lp8788_charger *pchg,
+ union power_supply_propval *val)
+{
+ u8 data;
+ int ret;
+
+ ret = lp8788_read_byte(pchg->lp, LP8788_CHG_STATUS, &data);
+ if (ret)
+ return ret;
+
+ if (data & LP8788_NO_BATT_M)
+ val->intval = POWER_SUPPLY_HEALTH_UNSPEC_FAILURE;
+ else if (data & LP8788_BAD_BATT_M)
+ val->intval = POWER_SUPPLY_HEALTH_DEAD;
+ else
+ val->intval = POWER_SUPPLY_HEALTH_GOOD;
+
+ return 0;
+}
+
+static int lp8788_get_battery_present(struct lp8788_charger *pchg,
+ union power_supply_propval *val)
+{
+ u8 data;
+ int ret;
+
+ ret = lp8788_read_byte(pchg->lp, LP8788_CHG_STATUS, &data);
+ if (ret)
+ return ret;
+
+ val->intval = !(data & LP8788_NO_BATT_M);
+ return 0;
+}
+
+static int lp8788_get_vbatt_adc(struct lp8788_charger *pchg, int *result)
+{
+ struct iio_channel *channel = pchg->chan[LP8788_VBATT];
+
+ if (!channel)
+ return -EINVAL;
+
+ return iio_read_channel_processed(channel, result);
+}
+
+static int lp8788_get_battery_voltage(struct lp8788_charger *pchg,
+ union power_supply_propval *val)
+{
+ return lp8788_get_vbatt_adc(pchg, &val->intval);
+}
+
+static int lp8788_get_battery_capacity(struct lp8788_charger *pchg,
+ union power_supply_propval *val)
+{
+ struct lp8788 *lp = pchg->lp;
+ struct lp8788_charger_platform_data *pdata = pchg->pdata;
+ unsigned int max_vbatt;
+ int vbatt;
+ enum lp8788_charging_state state;
+ u8 data;
+ int ret;
+
+ if (!pdata)
+ return -EINVAL;
+
+ max_vbatt = pdata->max_vbatt_mv;
+ if (max_vbatt == 0)
+ return -EINVAL;
+
+ ret = lp8788_read_byte(lp, LP8788_CHG_STATUS, &data);
+ if (ret)
+ return ret;
+
+ state = (data & LP8788_CHG_STATE_M) >> LP8788_CHG_STATE_S;
+
+ if (state == LP8788_MAINTENANCE) {
+ val->intval = LP8788_MAX_BATT_CAPACITY;
+ } else {
+ ret = lp8788_get_vbatt_adc(pchg, &vbatt);
+ if (ret)
+ return ret;
+
+ val->intval = (vbatt * LP8788_MAX_BATT_CAPACITY) / max_vbatt;
+ val->intval = min(val->intval, LP8788_MAX_BATT_CAPACITY);
+ }
+
+ return 0;
+}
+
+static int lp8788_get_battery_temperature(struct lp8788_charger *pchg,
+ union power_supply_propval *val)
+{
+ struct iio_channel *channel = pchg->chan[LP8788_BATT_TEMP];
+ int result;
+ int ret;
+
+ if (!channel)
+ return -EINVAL;
+
+ ret = iio_read_channel_processed(channel, &result);
+ if (ret < 0)
+ return -EINVAL;
+
+ /* unit: 0.1 'C */
+ val->intval = result * 10;
+
+ return 0;
+}
+
+static int lp8788_get_battery_charging_current(struct lp8788_charger *pchg,
+ union power_supply_propval *val)
+{
+ u8 read;
+
+ lp8788_read_byte(pchg->lp, LP8788_CHG_IBATT, &read);
+ read &= LP8788_CHG_IBATT_M;
+ val->intval = LP8788_ISEL_STEP *
+ (min_t(int, read, LP8788_ISEL_MAX) + 1);
+
+ return 0;
+}
+
+static int lp8788_get_charging_termination_voltage(struct lp8788_charger *pchg,
+ union power_supply_propval *val)
+{
+ u8 read;
+
+ lp8788_read_byte(pchg->lp, LP8788_CHG_VTERM, &read);
+ read &= LP8788_CHG_VTERM_M;
+ val->intval = LP8788_VTERM_MIN + LP8788_VTERM_STEP * read;
+
+ return 0;
+}
+
+static int lp8788_battery_get_property(struct power_supply *psy,
+ enum power_supply_property psp,
+ union power_supply_propval *val)
+{
+ struct lp8788_charger *pchg = dev_get_drvdata(psy->dev.parent);
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_STATUS:
+ return lp8788_get_battery_status(pchg, val);
+ case POWER_SUPPLY_PROP_HEALTH:
+ return lp8788_get_battery_health(pchg, val);
+ case POWER_SUPPLY_PROP_PRESENT:
+ return lp8788_get_battery_present(pchg, val);
+ case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+ return lp8788_get_battery_voltage(pchg, val);
+ case POWER_SUPPLY_PROP_CAPACITY:
+ return lp8788_get_battery_capacity(pchg, val);
+ case POWER_SUPPLY_PROP_TEMP:
+ return lp8788_get_battery_temperature(pchg, val);
+ case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT:
+ return lp8788_get_battery_charging_current(pchg, val);
+ case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX:
+ return lp8788_get_charging_termination_voltage(pchg, val);
+ default:
+ return -EINVAL;
+ }
+}
+
+static inline bool lp8788_is_valid_charger_register(u8 addr)
+{
+ return addr >= LP8788_CHG_START && addr <= LP8788_CHG_END;
+}
+
+static int lp8788_update_charger_params(struct platform_device *pdev,
+ struct lp8788_charger *pchg)
+{
+ struct lp8788 *lp = pchg->lp;
+ struct lp8788_charger_platform_data *pdata = pchg->pdata;
+ struct lp8788_chg_param *param;
+ int i;
+ int ret;
+
+ if (!pdata || !pdata->chg_params) {
+ dev_info(&pdev->dev, "skip updating charger parameters\n");
+ return 0;
+ }
+
+ /* settting charging parameters */
+ for (i = 0; i < pdata->num_chg_params; i++) {
+ param = pdata->chg_params + i;
+
+ if (lp8788_is_valid_charger_register(param->addr)) {
+ ret = lp8788_write_byte(lp, param->addr, param->val);
+ if (ret)
+ return ret;
+ }
+ }
+
+ return 0;
+}
+
+static const struct power_supply_desc lp8788_psy_charger_desc = {
+ .name = LP8788_CHARGER_NAME,
+ .type = POWER_SUPPLY_TYPE_MAINS,
+ .properties = lp8788_charger_prop,
+ .num_properties = ARRAY_SIZE(lp8788_charger_prop),
+ .get_property = lp8788_charger_get_property,
+};
+
+static const struct power_supply_desc lp8788_psy_battery_desc = {
+ .name = LP8788_BATTERY_NAME,
+ .type = POWER_SUPPLY_TYPE_BATTERY,
+ .properties = lp8788_battery_prop,
+ .num_properties = ARRAY_SIZE(lp8788_battery_prop),
+ .get_property = lp8788_battery_get_property,
+};
+
+static void lp8788_psy_unregister(struct lp8788_charger *pchg)
+{
+ power_supply_unregister(pchg->battery);
+ power_supply_unregister(pchg->charger);
+}
+
+static void lp8788_charger_event(struct work_struct *work)
+{
+ struct lp8788_charger *pchg =
+ container_of(work, struct lp8788_charger, charger_work);
+ struct lp8788_charger_platform_data *pdata = pchg->pdata;
+ enum lp8788_charger_event event = lp8788_is_charger_detected(pchg);
+
+ pdata->charger_event(pchg->lp, event);
+}
+
+static bool lp8788_find_irq_id(struct lp8788_charger *pchg, int virq, int *id)
+{
+ bool found = false;
+ int i;
+
+ for (i = 0; i < pchg->num_irqs; i++) {
+ if (pchg->irqs[i].virq == virq) {
+ *id = pchg->irqs[i].which;
+ found = true;
+ break;
+ }
+ }
+
+ return found;
+}
+
+static irqreturn_t lp8788_charger_irq_thread(int virq, void *ptr)
+{
+ struct lp8788_charger *pchg = ptr;
+ struct lp8788_charger_platform_data *pdata = pchg->pdata;
+ int id = -1;
+
+ if (!lp8788_find_irq_id(pchg, virq, &id))
+ return IRQ_NONE;
+
+ switch (id) {
+ case LP8788_INT_CHG_INPUT_STATE:
+ case LP8788_INT_CHG_STATE:
+ case LP8788_INT_EOC:
+ case LP8788_INT_BATT_LOW:
+ case LP8788_INT_NO_BATT:
+ power_supply_changed(pchg->charger);
+ power_supply_changed(pchg->battery);
+ break;
+ default:
+ break;
+ }
+
+ /* report charger dectection event if used */
+ if (!pdata)
+ goto irq_handled;
+
+ if (pdata->charger_event && id == LP8788_INT_CHG_INPUT_STATE)
+ schedule_work(&pchg->charger_work);
+
+irq_handled:
+ return IRQ_HANDLED;
+}
+
+static int lp8788_set_irqs(struct platform_device *pdev,
+ struct lp8788_charger *pchg, const char *name)
+{
+ struct resource *r;
+ struct irq_domain *irqdm = pchg->lp->irqdm;
+ int irq_start;
+ int irq_end;
+ int virq;
+ int nr_irq;
+ int i;
+ int ret;
+
+ /* no error even if no irq resource */
+ r = platform_get_resource_byname(pdev, IORESOURCE_IRQ, name);
+ if (!r)
+ return 0;
+
+ irq_start = r->start;
+ irq_end = r->end;
+
+ for (i = irq_start; i <= irq_end; i++) {
+ nr_irq = pchg->num_irqs;
+
+ virq = irq_create_mapping(irqdm, i);
+ pchg->irqs[nr_irq].virq = virq;
+ pchg->irqs[nr_irq].which = i;
+ pchg->num_irqs++;
+
+ ret = request_threaded_irq(virq, NULL,
+ lp8788_charger_irq_thread,
+ IRQF_ONESHOT, name, pchg);
+ if (ret)
+ break;
+ }
+
+ if (i <= irq_end)
+ goto err_free_irq;
+
+ return 0;
+
+err_free_irq:
+ for (i = 0; i < pchg->num_irqs; i++)
+ free_irq(pchg->irqs[i].virq, pchg);
+ return ret;
+}
+
+static int lp8788_irq_register(struct platform_device *pdev,
+ struct lp8788_charger *pchg)
+{
+ const char *name[] = {
+ LP8788_CHG_IRQ, LP8788_PRSW_IRQ, LP8788_BATT_IRQ
+ };
+ int i;
+ int ret;
+
+ INIT_WORK(&pchg->charger_work, lp8788_charger_event);
+ pchg->num_irqs = 0;
+
+ for (i = 0; i < ARRAY_SIZE(name); i++) {
+ ret = lp8788_set_irqs(pdev, pchg, name[i]);
+ if (ret) {
+ dev_warn(&pdev->dev, "irq setup failed: %s\n", name[i]);
+ return ret;
+ }
+ }
+
+ if (pchg->num_irqs > LP8788_MAX_CHG_IRQS) {
+ dev_err(&pdev->dev, "invalid total number of irqs: %d\n",
+ pchg->num_irqs);
+ return -EINVAL;
+ }
+
+
+ return 0;
+}
+
+static void lp8788_irq_unregister(struct platform_device *pdev,
+ struct lp8788_charger *pchg)
+{
+ int i;
+ int irq;
+
+ for (i = 0; i < pchg->num_irqs; i++) {
+ irq = pchg->irqs[i].virq;
+ if (!irq)
+ continue;
+
+ free_irq(irq, pchg);
+ }
+}
+
+static void lp8788_setup_adc_channel(struct device *dev,
+ struct lp8788_charger *pchg)
+{
+ struct lp8788_charger_platform_data *pdata = pchg->pdata;
+ struct iio_channel *chan;
+
+ if (!pdata)
+ return;
+
+ /* ADC channel for battery voltage */
+ chan = devm_iio_channel_get(dev, pdata->adc_vbatt);
+ pchg->chan[LP8788_VBATT] = IS_ERR(chan) ? NULL : chan;
+
+ /* ADC channel for battery temperature */
+ chan = devm_iio_channel_get(dev, pdata->adc_batt_temp);
+ pchg->chan[LP8788_BATT_TEMP] = IS_ERR(chan) ? NULL : chan;
+}
+
+static ssize_t lp8788_show_charger_status(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct lp8788_charger *pchg = dev_get_drvdata(dev);
+ enum lp8788_charging_state state;
+ static const char * const desc[LP8788_MAX_CHG_STATE] = {
+ [LP8788_OFF] = "CHARGER OFF",
+ [LP8788_WARM_UP] = "WARM UP",
+ [LP8788_LOW_INPUT] = "LOW INPUT STATE",
+ [LP8788_PRECHARGE] = "CHARGING - PRECHARGE",
+ [LP8788_CC] = "CHARGING - CC",
+ [LP8788_CV] = "CHARGING - CV",
+ [LP8788_MAINTENANCE] = "NO CHARGING - MAINTENANCE",
+ [LP8788_BATTERY_FAULT] = "BATTERY FAULT",
+ [LP8788_SYSTEM_SUPPORT] = "SYSTEM SUPPORT",
+ [LP8788_HIGH_CURRENT] = "HIGH CURRENT",
+ };
+ u8 data;
+
+ lp8788_read_byte(pchg->lp, LP8788_CHG_STATUS, &data);
+ state = (data & LP8788_CHG_STATE_M) >> LP8788_CHG_STATE_S;
+
+ return scnprintf(buf, PAGE_SIZE, "%s\n", desc[state]);
+}
+
+static ssize_t lp8788_show_eoc_time(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct lp8788_charger *pchg = dev_get_drvdata(dev);
+ static const char * const stime[] = {
+ "400ms", "5min", "10min", "15min",
+ "20min", "25min", "30min", "No timeout"
+ };
+ u8 val;
+
+ lp8788_read_byte(pchg->lp, LP8788_CHG_EOC, &val);
+ val = (val & LP8788_CHG_EOC_TIME_M) >> LP8788_CHG_EOC_TIME_S;
+
+ return scnprintf(buf, PAGE_SIZE, "End Of Charge Time: %s\n",
+ stime[val]);
+}
+
+static ssize_t lp8788_show_eoc_level(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct lp8788_charger *pchg = dev_get_drvdata(dev);
+ static const char * const abs_level[] = {
+ "25mA", "49mA", "75mA", "98mA"
+ };
+ static const char * const relative_level[] = {
+ "5%", "10%", "15%", "20%"
+ };
+ const char *level;
+ u8 val;
+ u8 mode;
+
+ lp8788_read_byte(pchg->lp, LP8788_CHG_EOC, &val);
+
+ mode = val & LP8788_CHG_EOC_MODE_M;
+ val = (val & LP8788_CHG_EOC_LEVEL_M) >> LP8788_CHG_EOC_LEVEL_S;
+ level = mode ? abs_level[val] : relative_level[val];
+
+ return scnprintf(buf, PAGE_SIZE, "End Of Charge Level: %s\n", level);
+}
+
+static DEVICE_ATTR(charger_status, S_IRUSR, lp8788_show_charger_status, NULL);
+static DEVICE_ATTR(eoc_time, S_IRUSR, lp8788_show_eoc_time, NULL);
+static DEVICE_ATTR(eoc_level, S_IRUSR, lp8788_show_eoc_level, NULL);
+
+static struct attribute *lp8788_charger_sysfs_attrs[] = {
+ &dev_attr_charger_status.attr,
+ &dev_attr_eoc_time.attr,
+ &dev_attr_eoc_level.attr,
+ NULL,
+};
+
+ATTRIBUTE_GROUPS(lp8788_charger_sysfs);
+
+static int lp8788_psy_register(struct platform_device *pdev,
+ struct lp8788_charger *pchg)
+{
+ struct power_supply_config charger_cfg = {};
+
+ charger_cfg.attr_grp = lp8788_charger_sysfs_groups;
+ charger_cfg.supplied_to = battery_supplied_to;
+ charger_cfg.num_supplicants = ARRAY_SIZE(battery_supplied_to);
+
+ pchg->charger = power_supply_register(&pdev->dev,
+ &lp8788_psy_charger_desc,
+ &charger_cfg);
+ if (IS_ERR(pchg->charger))
+ return -EPERM;
+
+ pchg->battery = power_supply_register(&pdev->dev,
+ &lp8788_psy_battery_desc, NULL);
+ if (IS_ERR(pchg->battery)) {
+ power_supply_unregister(pchg->charger);
+ return -EPERM;
+ }
+
+ return 0;
+}
+
+static int lp8788_charger_probe(struct platform_device *pdev)
+{
+ struct lp8788 *lp = dev_get_drvdata(pdev->dev.parent);
+ struct lp8788_charger *pchg;
+ struct device *dev = &pdev->dev;
+ int ret;
+
+ pchg = devm_kzalloc(dev, sizeof(struct lp8788_charger), GFP_KERNEL);
+ if (!pchg)
+ return -ENOMEM;
+
+ pchg->lp = lp;
+ pchg->pdata = lp->pdata ? lp->pdata->chg_pdata : NULL;
+ platform_set_drvdata(pdev, pchg);
+
+ ret = lp8788_update_charger_params(pdev, pchg);
+ if (ret)
+ return ret;
+
+ lp8788_setup_adc_channel(&pdev->dev, pchg);
+
+ ret = lp8788_psy_register(pdev, pchg);
+ if (ret)
+ return ret;
+
+ ret = lp8788_irq_register(pdev, pchg);
+ if (ret)
+ dev_warn(dev, "failed to register charger irq: %d\n", ret);
+
+ return 0;
+}
+
+static int lp8788_charger_remove(struct platform_device *pdev)
+{
+ struct lp8788_charger *pchg = platform_get_drvdata(pdev);
+
+ flush_work(&pchg->charger_work);
+ lp8788_irq_unregister(pdev, pchg);
+ lp8788_psy_unregister(pchg);
+
+ return 0;
+}
+
+static struct platform_driver lp8788_charger_driver = {
+ .probe = lp8788_charger_probe,
+ .remove = lp8788_charger_remove,
+ .driver = {
+ .name = LP8788_DEV_CHARGER,
+ },
+};
+module_platform_driver(lp8788_charger_driver);
+
+MODULE_DESCRIPTION("TI LP8788 Charger Driver");
+MODULE_AUTHOR("Milo Kim");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:lp8788-charger");
diff --git a/drivers/power/supply/lt3651-charger.c b/drivers/power/supply/lt3651-charger.c
new file mode 100644
index 000000000..8de500ffa
--- /dev/null
+++ b/drivers/power/supply/lt3651-charger.c
@@ -0,0 +1,207 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Driver for Analog Devices (Linear Technology) LT3651 charger IC.
+ * Copyright (C) 2017, Topic Embedded Products
+ */
+
+#include <linux/device.h>
+#include <linux/gpio/consumer.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/power_supply.h>
+#include <linux/slab.h>
+#include <linux/of.h>
+
+struct lt3651_charger {
+ struct power_supply *charger;
+ struct power_supply_desc charger_desc;
+ struct gpio_desc *acpr_gpio;
+ struct gpio_desc *fault_gpio;
+ struct gpio_desc *chrg_gpio;
+};
+
+static irqreturn_t lt3651_charger_irq(int irq, void *devid)
+{
+ struct power_supply *charger = devid;
+
+ power_supply_changed(charger);
+
+ return IRQ_HANDLED;
+}
+
+static inline struct lt3651_charger *psy_to_lt3651_charger(
+ struct power_supply *psy)
+{
+ return power_supply_get_drvdata(psy);
+}
+
+static int lt3651_charger_get_property(struct power_supply *psy,
+ enum power_supply_property psp, union power_supply_propval *val)
+{
+ struct lt3651_charger *lt3651_charger = psy_to_lt3651_charger(psy);
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_STATUS:
+ if (!lt3651_charger->chrg_gpio) {
+ val->intval = POWER_SUPPLY_STATUS_UNKNOWN;
+ break;
+ }
+ if (gpiod_get_value(lt3651_charger->chrg_gpio))
+ val->intval = POWER_SUPPLY_STATUS_CHARGING;
+ else
+ val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING;
+ break;
+ case POWER_SUPPLY_PROP_ONLINE:
+ val->intval = gpiod_get_value(lt3651_charger->acpr_gpio);
+ break;
+ case POWER_SUPPLY_PROP_HEALTH:
+ if (!lt3651_charger->fault_gpio) {
+ val->intval = POWER_SUPPLY_HEALTH_UNKNOWN;
+ break;
+ }
+ if (!gpiod_get_value(lt3651_charger->fault_gpio)) {
+ val->intval = POWER_SUPPLY_HEALTH_GOOD;
+ break;
+ }
+ /*
+ * If the fault pin is active, the chrg pin explains the type
+ * of failure.
+ */
+ if (!lt3651_charger->chrg_gpio) {
+ val->intval = POWER_SUPPLY_HEALTH_UNSPEC_FAILURE;
+ break;
+ }
+ val->intval = gpiod_get_value(lt3651_charger->chrg_gpio) ?
+ POWER_SUPPLY_HEALTH_OVERHEAT :
+ POWER_SUPPLY_HEALTH_DEAD;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static enum power_supply_property lt3651_charger_properties[] = {
+ POWER_SUPPLY_PROP_STATUS,
+ POWER_SUPPLY_PROP_ONLINE,
+ POWER_SUPPLY_PROP_HEALTH,
+};
+
+static int lt3651_charger_probe(struct platform_device *pdev)
+{
+ struct power_supply_config psy_cfg = {};
+ struct lt3651_charger *lt3651_charger;
+ struct power_supply_desc *charger_desc;
+ int ret;
+
+ lt3651_charger = devm_kzalloc(&pdev->dev, sizeof(*lt3651_charger),
+ GFP_KERNEL);
+ if (!lt3651_charger)
+ return -ENOMEM;
+
+ lt3651_charger->acpr_gpio = devm_gpiod_get(&pdev->dev,
+ "lltc,acpr", GPIOD_IN);
+ if (IS_ERR(lt3651_charger->acpr_gpio)) {
+ ret = PTR_ERR(lt3651_charger->acpr_gpio);
+ dev_err(&pdev->dev, "Failed to acquire acpr GPIO: %d\n", ret);
+ return ret;
+ }
+ lt3651_charger->fault_gpio = devm_gpiod_get_optional(&pdev->dev,
+ "lltc,fault", GPIOD_IN);
+ if (IS_ERR(lt3651_charger->fault_gpio)) {
+ ret = PTR_ERR(lt3651_charger->fault_gpio);
+ dev_err(&pdev->dev, "Failed to acquire fault GPIO: %d\n", ret);
+ return ret;
+ }
+ lt3651_charger->chrg_gpio = devm_gpiod_get_optional(&pdev->dev,
+ "lltc,chrg", GPIOD_IN);
+ if (IS_ERR(lt3651_charger->chrg_gpio)) {
+ ret = PTR_ERR(lt3651_charger->chrg_gpio);
+ dev_err(&pdev->dev, "Failed to acquire chrg GPIO: %d\n", ret);
+ return ret;
+ }
+
+ charger_desc = &lt3651_charger->charger_desc;
+ charger_desc->name = pdev->dev.of_node->name;
+ charger_desc->type = POWER_SUPPLY_TYPE_MAINS;
+ charger_desc->properties = lt3651_charger_properties;
+ charger_desc->num_properties = ARRAY_SIZE(lt3651_charger_properties);
+ charger_desc->get_property = lt3651_charger_get_property;
+ psy_cfg.of_node = pdev->dev.of_node;
+ psy_cfg.drv_data = lt3651_charger;
+
+ lt3651_charger->charger = devm_power_supply_register(&pdev->dev,
+ charger_desc, &psy_cfg);
+ if (IS_ERR(lt3651_charger->charger)) {
+ ret = PTR_ERR(lt3651_charger->charger);
+ dev_err(&pdev->dev, "Failed to register power supply: %d\n",
+ ret);
+ return ret;
+ }
+
+ /*
+ * Acquire IRQs for the GPIO pins if possible. If the system does not
+ * support IRQs on these pins, userspace will have to poll the sysfs
+ * files manually.
+ */
+ if (lt3651_charger->acpr_gpio) {
+ ret = gpiod_to_irq(lt3651_charger->acpr_gpio);
+ if (ret >= 0)
+ ret = devm_request_any_context_irq(&pdev->dev, ret,
+ lt3651_charger_irq,
+ IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
+ dev_name(&pdev->dev), lt3651_charger->charger);
+ if (ret < 0)
+ dev_warn(&pdev->dev, "Failed to request acpr irq\n");
+ }
+ if (lt3651_charger->fault_gpio) {
+ ret = gpiod_to_irq(lt3651_charger->fault_gpio);
+ if (ret >= 0)
+ ret = devm_request_any_context_irq(&pdev->dev, ret,
+ lt3651_charger_irq,
+ IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
+ dev_name(&pdev->dev), lt3651_charger->charger);
+ if (ret < 0)
+ dev_warn(&pdev->dev, "Failed to request fault irq\n");
+ }
+ if (lt3651_charger->chrg_gpio) {
+ ret = gpiod_to_irq(lt3651_charger->chrg_gpio);
+ if (ret >= 0)
+ ret = devm_request_any_context_irq(&pdev->dev, ret,
+ lt3651_charger_irq,
+ IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
+ dev_name(&pdev->dev), lt3651_charger->charger);
+ if (ret < 0)
+ dev_warn(&pdev->dev, "Failed to request chrg irq\n");
+ }
+
+ platform_set_drvdata(pdev, lt3651_charger);
+
+ return 0;
+}
+
+static const struct of_device_id lt3651_charger_match[] = {
+ { .compatible = "lltc,ltc3651-charger" }, /* DEPRECATED */
+ { .compatible = "lltc,lt3651-charger" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, lt3651_charger_match);
+
+static struct platform_driver lt3651_charger_driver = {
+ .probe = lt3651_charger_probe,
+ .driver = {
+ .name = "lt3651-charger",
+ .of_match_table = lt3651_charger_match,
+ },
+};
+
+module_platform_driver(lt3651_charger_driver);
+
+MODULE_AUTHOR("Mike Looijmans <mike.looijmans@topic.nl>");
+MODULE_DESCRIPTION("Driver for LT3651 charger");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:lt3651-charger");
diff --git a/drivers/power/supply/ltc2941-battery-gauge.c b/drivers/power/supply/ltc2941-battery-gauge.c
new file mode 100644
index 000000000..10cd61751
--- /dev/null
+++ b/drivers/power/supply/ltc2941-battery-gauge.c
@@ -0,0 +1,667 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * I2C client/driver for the Linear Technology LTC2941, LTC2942, LTC2943
+ * and LTC2944 Battery Gas Gauge IC
+ *
+ * Copyright (C) 2014 Topic Embedded Systems
+ *
+ * Author: Auryn Verwegen
+ * Author: Mike Looijmans
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/swab.h>
+#include <linux/i2c.h>
+#include <linux/delay.h>
+#include <linux/power_supply.h>
+#include <linux/slab.h>
+
+#define I16_MSB(x) ((x >> 8) & 0xFF)
+#define I16_LSB(x) (x & 0xFF)
+
+#define LTC294X_WORK_DELAY 10 /* Update delay in seconds */
+
+#define LTC294X_MAX_VALUE 0xFFFF
+#define LTC294X_MID_SUPPLY 0x7FFF
+
+#define LTC2941_MAX_PRESCALER_EXP 7
+#define LTC2943_MAX_PRESCALER_EXP 6
+
+enum ltc294x_reg {
+ LTC294X_REG_STATUS = 0x00,
+ LTC294X_REG_CONTROL = 0x01,
+ LTC294X_REG_ACC_CHARGE_MSB = 0x02,
+ LTC294X_REG_ACC_CHARGE_LSB = 0x03,
+ LTC294X_REG_CHARGE_THR_HIGH_MSB = 0x04,
+ LTC294X_REG_CHARGE_THR_HIGH_LSB = 0x05,
+ LTC294X_REG_CHARGE_THR_LOW_MSB = 0x06,
+ LTC294X_REG_CHARGE_THR_LOW_LSB = 0x07,
+ LTC294X_REG_VOLTAGE_MSB = 0x08,
+ LTC294X_REG_VOLTAGE_LSB = 0x09,
+ LTC2942_REG_TEMPERATURE_MSB = 0x0C,
+ LTC2942_REG_TEMPERATURE_LSB = 0x0D,
+ LTC2943_REG_CURRENT_MSB = 0x0E,
+ LTC2943_REG_CURRENT_LSB = 0x0F,
+ LTC2943_REG_TEMPERATURE_MSB = 0x14,
+ LTC2943_REG_TEMPERATURE_LSB = 0x15,
+};
+
+enum ltc294x_id {
+ LTC2941_ID,
+ LTC2942_ID,
+ LTC2943_ID,
+ LTC2944_ID,
+};
+
+#define LTC2941_REG_STATUS_CHIP_ID BIT(7)
+
+#define LTC2942_REG_CONTROL_MODE_SCAN (BIT(7) | BIT(6))
+#define LTC2943_REG_CONTROL_MODE_SCAN BIT(7)
+#define LTC294X_REG_CONTROL_PRESCALER_MASK (BIT(5) | BIT(4) | BIT(3))
+#define LTC294X_REG_CONTROL_SHUTDOWN_MASK (BIT(0))
+#define LTC294X_REG_CONTROL_PRESCALER_SET(x) \
+ ((x << 3) & LTC294X_REG_CONTROL_PRESCALER_MASK)
+#define LTC294X_REG_CONTROL_ALCC_CONFIG_DISABLED 0
+#define LTC294X_REG_CONTROL_ADC_DISABLE(x) ((x) & ~(BIT(7) | BIT(6)))
+
+struct ltc294x_info {
+ struct i2c_client *client; /* I2C Client pointer */
+ struct power_supply *supply; /* Supply pointer */
+ struct power_supply_desc supply_desc; /* Supply description */
+ struct delayed_work work; /* Work scheduler */
+ enum ltc294x_id id; /* Chip type */
+ int charge; /* Last charge register content */
+ int r_sense; /* mOhm */
+ int Qlsb; /* nAh */
+};
+
+static inline int convert_bin_to_uAh(
+ const struct ltc294x_info *info, int Q)
+{
+ return ((Q * (info->Qlsb / 10))) / 100;
+}
+
+static inline int convert_uAh_to_bin(
+ const struct ltc294x_info *info, int uAh)
+{
+ int Q;
+
+ Q = (uAh * 100) / (info->Qlsb/10);
+ return (Q < LTC294X_MAX_VALUE) ? Q : LTC294X_MAX_VALUE;
+}
+
+static int ltc294x_read_regs(struct i2c_client *client,
+ enum ltc294x_reg reg, u8 *buf, int num_regs)
+{
+ int ret;
+ struct i2c_msg msgs[2] = { };
+ u8 reg_start = reg;
+
+ msgs[0].addr = client->addr;
+ msgs[0].len = 1;
+ msgs[0].buf = &reg_start;
+
+ msgs[1].addr = client->addr;
+ msgs[1].len = num_regs;
+ msgs[1].buf = buf;
+ msgs[1].flags = I2C_M_RD;
+
+ ret = i2c_transfer(client->adapter, &msgs[0], 2);
+ if (ret < 0) {
+ dev_err(&client->dev, "ltc2941 read_reg failed!\n");
+ return ret;
+ }
+
+ dev_dbg(&client->dev, "%s (%#x, %d) -> %#x\n",
+ __func__, reg, num_regs, *buf);
+
+ return 0;
+}
+
+static int ltc294x_write_regs(struct i2c_client *client,
+ enum ltc294x_reg reg, const u8 *buf, int num_regs)
+{
+ int ret;
+ u8 reg_start = reg;
+
+ ret = i2c_smbus_write_i2c_block_data(client, reg_start, num_regs, buf);
+ if (ret < 0) {
+ dev_err(&client->dev, "ltc2941 write_reg failed!\n");
+ return ret;
+ }
+
+ dev_dbg(&client->dev, "%s (%#x, %d) -> %#x\n",
+ __func__, reg, num_regs, *buf);
+
+ return 0;
+}
+
+static int ltc294x_reset(const struct ltc294x_info *info, int prescaler_exp)
+{
+ int ret;
+ u8 value;
+ u8 control;
+
+ /* Read status and control registers */
+ ret = ltc294x_read_regs(info->client, LTC294X_REG_CONTROL, &value, 1);
+ if (ret < 0) {
+ dev_err(&info->client->dev,
+ "Could not read registers from device\n");
+ goto error_exit;
+ }
+
+ control = LTC294X_REG_CONTROL_PRESCALER_SET(prescaler_exp) |
+ LTC294X_REG_CONTROL_ALCC_CONFIG_DISABLED;
+ /* Put device into "monitor" mode */
+ switch (info->id) {
+ case LTC2942_ID: /* 2942 measures every 2 sec */
+ control |= LTC2942_REG_CONTROL_MODE_SCAN;
+ break;
+ case LTC2943_ID:
+ case LTC2944_ID: /* 2943 and 2944 measure every 10 sec */
+ control |= LTC2943_REG_CONTROL_MODE_SCAN;
+ break;
+ default:
+ break;
+ }
+
+ if (value != control) {
+ ret = ltc294x_write_regs(info->client,
+ LTC294X_REG_CONTROL, &control, 1);
+ if (ret < 0) {
+ dev_err(&info->client->dev,
+ "Could not write register\n");
+ goto error_exit;
+ }
+ }
+
+ return 0;
+
+error_exit:
+ return ret;
+}
+
+static int ltc294x_read_charge_register(const struct ltc294x_info *info,
+ enum ltc294x_reg reg)
+ {
+ int ret;
+ u8 datar[2];
+
+ ret = ltc294x_read_regs(info->client, reg, &datar[0], 2);
+ if (ret < 0)
+ return ret;
+ return (datar[0] << 8) + datar[1];
+}
+
+static int ltc294x_get_charge(const struct ltc294x_info *info,
+ enum ltc294x_reg reg, int *val)
+{
+ int value = ltc294x_read_charge_register(info, reg);
+
+ if (value < 0)
+ return value;
+ /* When r_sense < 0, this counts up when the battery discharges */
+ if (info->Qlsb < 0)
+ value -= 0xFFFF;
+ *val = convert_bin_to_uAh(info, value);
+ return 0;
+}
+
+static int ltc294x_set_charge_now(const struct ltc294x_info *info, int val)
+{
+ int ret;
+ u8 dataw[2];
+ u8 ctrl_reg;
+ s32 value;
+
+ value = convert_uAh_to_bin(info, val);
+ /* Direction depends on how sense+/- were connected */
+ if (info->Qlsb < 0)
+ value += 0xFFFF;
+ if ((value < 0) || (value > 0xFFFF)) /* input validation */
+ return -EINVAL;
+
+ /* Read control register */
+ ret = ltc294x_read_regs(info->client,
+ LTC294X_REG_CONTROL, &ctrl_reg, 1);
+ if (ret < 0)
+ return ret;
+ /* Disable analog section */
+ ctrl_reg |= LTC294X_REG_CONTROL_SHUTDOWN_MASK;
+ ret = ltc294x_write_regs(info->client,
+ LTC294X_REG_CONTROL, &ctrl_reg, 1);
+ if (ret < 0)
+ return ret;
+ /* Set new charge value */
+ dataw[0] = I16_MSB(value);
+ dataw[1] = I16_LSB(value);
+ ret = ltc294x_write_regs(info->client,
+ LTC294X_REG_ACC_CHARGE_MSB, &dataw[0], 2);
+ if (ret < 0)
+ goto error_exit;
+ /* Enable analog section */
+error_exit:
+ ctrl_reg &= ~LTC294X_REG_CONTROL_SHUTDOWN_MASK;
+ ret = ltc294x_write_regs(info->client,
+ LTC294X_REG_CONTROL, &ctrl_reg, 1);
+
+ return ret < 0 ? ret : 0;
+}
+
+static int ltc294x_set_charge_thr(const struct ltc294x_info *info,
+ enum ltc294x_reg reg, int val)
+{
+ u8 dataw[2];
+ s32 value;
+
+ value = convert_uAh_to_bin(info, val);
+ /* Direction depends on how sense+/- were connected */
+ if (info->Qlsb < 0)
+ value += 0xFFFF;
+ if ((value < 0) || (value > 0xFFFF)) /* input validation */
+ return -EINVAL;
+
+ /* Set new charge value */
+ dataw[0] = I16_MSB(value);
+ dataw[1] = I16_LSB(value);
+ return ltc294x_write_regs(info->client, reg, &dataw[0], 2);
+}
+
+static int ltc294x_get_charge_counter(
+ const struct ltc294x_info *info, int *val)
+{
+ int value = ltc294x_read_charge_register(info, LTC294X_REG_ACC_CHARGE_MSB);
+
+ if (value < 0)
+ return value;
+ value -= LTC294X_MID_SUPPLY;
+ *val = convert_bin_to_uAh(info, value);
+ return 0;
+}
+
+static int ltc294x_get_voltage(const struct ltc294x_info *info, int *val)
+{
+ int ret;
+ u8 datar[2];
+ u32 value;
+
+ ret = ltc294x_read_regs(info->client,
+ LTC294X_REG_VOLTAGE_MSB, &datar[0], 2);
+ value = (datar[0] << 8) | datar[1];
+ switch (info->id) {
+ case LTC2943_ID:
+ value *= 23600 * 2;
+ value /= 0xFFFF;
+ value *= 1000 / 2;
+ break;
+ case LTC2944_ID:
+ value *= 70800 / 5*4;
+ value /= 0xFFFF;
+ value *= 1000 * 5/4;
+ break;
+ default:
+ value *= 6000 * 10;
+ value /= 0xFFFF;
+ value *= 1000 / 10;
+ break;
+ }
+ *val = value;
+ return ret;
+}
+
+static int ltc294x_get_current(const struct ltc294x_info *info, int *val)
+{
+ int ret;
+ u8 datar[2];
+ s32 value;
+
+ ret = ltc294x_read_regs(info->client,
+ LTC2943_REG_CURRENT_MSB, &datar[0], 2);
+ value = (datar[0] << 8) | datar[1];
+ value -= 0x7FFF;
+ if (info->id == LTC2944_ID)
+ value *= 64000;
+ else
+ value *= 60000;
+ /* Value is in range -32k..+32k, r_sense is usually 10..50 mOhm,
+ * the formula below keeps everything in s32 range while preserving
+ * enough digits */
+ *val = 1000 * (value / (info->r_sense * 0x7FFF)); /* in uA */
+ return ret;
+}
+
+static int ltc294x_get_temperature(const struct ltc294x_info *info, int *val)
+{
+ enum ltc294x_reg reg;
+ int ret;
+ u8 datar[2];
+ u32 value;
+
+ if (info->id == LTC2942_ID) {
+ reg = LTC2942_REG_TEMPERATURE_MSB;
+ value = 6000; /* Full-scale is 600 Kelvin */
+ } else {
+ reg = LTC2943_REG_TEMPERATURE_MSB;
+ value = 5100; /* Full-scale is 510 Kelvin */
+ }
+ ret = ltc294x_read_regs(info->client, reg, &datar[0], 2);
+ value *= (datar[0] << 8) | datar[1];
+ /* Convert to tenths of degree Celsius */
+ *val = value / 0xFFFF - 2722;
+ return ret;
+}
+
+static int ltc294x_get_property(struct power_supply *psy,
+ enum power_supply_property prop,
+ union power_supply_propval *val)
+{
+ struct ltc294x_info *info = power_supply_get_drvdata(psy);
+
+ switch (prop) {
+ case POWER_SUPPLY_PROP_CHARGE_FULL:
+ return ltc294x_get_charge(info, LTC294X_REG_CHARGE_THR_HIGH_MSB,
+ &val->intval);
+ case POWER_SUPPLY_PROP_CHARGE_EMPTY:
+ return ltc294x_get_charge(info, LTC294X_REG_CHARGE_THR_LOW_MSB,
+ &val->intval);
+ case POWER_SUPPLY_PROP_CHARGE_NOW:
+ return ltc294x_get_charge(info, LTC294X_REG_ACC_CHARGE_MSB,
+ &val->intval);
+ case POWER_SUPPLY_PROP_CHARGE_COUNTER:
+ return ltc294x_get_charge_counter(info, &val->intval);
+ case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+ return ltc294x_get_voltage(info, &val->intval);
+ case POWER_SUPPLY_PROP_CURRENT_NOW:
+ return ltc294x_get_current(info, &val->intval);
+ case POWER_SUPPLY_PROP_TEMP:
+ return ltc294x_get_temperature(info, &val->intval);
+ default:
+ return -EINVAL;
+ }
+}
+
+static int ltc294x_set_property(struct power_supply *psy,
+ enum power_supply_property psp,
+ const union power_supply_propval *val)
+{
+ struct ltc294x_info *info = power_supply_get_drvdata(psy);
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_CHARGE_FULL:
+ return ltc294x_set_charge_thr(info,
+ LTC294X_REG_CHARGE_THR_HIGH_MSB, val->intval);
+ case POWER_SUPPLY_PROP_CHARGE_EMPTY:
+ return ltc294x_set_charge_thr(info,
+ LTC294X_REG_CHARGE_THR_LOW_MSB, val->intval);
+ case POWER_SUPPLY_PROP_CHARGE_NOW:
+ return ltc294x_set_charge_now(info, val->intval);
+ default:
+ return -EPERM;
+ }
+}
+
+static int ltc294x_property_is_writeable(
+ struct power_supply *psy, enum power_supply_property psp)
+{
+ switch (psp) {
+ case POWER_SUPPLY_PROP_CHARGE_FULL:
+ case POWER_SUPPLY_PROP_CHARGE_EMPTY:
+ case POWER_SUPPLY_PROP_CHARGE_NOW:
+ return 1;
+ default:
+ return 0;
+ }
+}
+
+static void ltc294x_update(struct ltc294x_info *info)
+{
+ int charge = ltc294x_read_charge_register(info, LTC294X_REG_ACC_CHARGE_MSB);
+
+ if (charge != info->charge) {
+ info->charge = charge;
+ power_supply_changed(info->supply);
+ }
+}
+
+static void ltc294x_work(struct work_struct *work)
+{
+ struct ltc294x_info *info;
+
+ info = container_of(work, struct ltc294x_info, work.work);
+ ltc294x_update(info);
+ schedule_delayed_work(&info->work, LTC294X_WORK_DELAY * HZ);
+}
+
+static enum power_supply_property ltc294x_properties[] = {
+ POWER_SUPPLY_PROP_CHARGE_COUNTER,
+ POWER_SUPPLY_PROP_CHARGE_FULL,
+ POWER_SUPPLY_PROP_CHARGE_EMPTY,
+ POWER_SUPPLY_PROP_CHARGE_NOW,
+ POWER_SUPPLY_PROP_VOLTAGE_NOW,
+ POWER_SUPPLY_PROP_TEMP,
+ POWER_SUPPLY_PROP_CURRENT_NOW,
+};
+
+static int ltc294x_i2c_remove(struct i2c_client *client)
+{
+ struct ltc294x_info *info = i2c_get_clientdata(client);
+
+ cancel_delayed_work_sync(&info->work);
+ power_supply_unregister(info->supply);
+ return 0;
+}
+
+static int ltc294x_i2c_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct power_supply_config psy_cfg = {};
+ struct ltc294x_info *info;
+ struct device_node *np;
+ int ret;
+ u32 prescaler_exp;
+ s32 r_sense;
+ u8 status;
+
+ info = devm_kzalloc(&client->dev, sizeof(*info), GFP_KERNEL);
+ if (info == NULL)
+ return -ENOMEM;
+
+ i2c_set_clientdata(client, info);
+
+ np = of_node_get(client->dev.of_node);
+
+ info->id = (enum ltc294x_id) (uintptr_t) of_device_get_match_data(
+ &client->dev);
+ info->supply_desc.name = np->name;
+
+ /* r_sense can be negative, when sense+ is connected to the battery
+ * instead of the sense-. This results in reversed measurements. */
+ ret = of_property_read_u32(np, "lltc,resistor-sense", &r_sense);
+ if (ret < 0) {
+ dev_err(&client->dev,
+ "Could not find lltc,resistor-sense in devicetree\n");
+ return ret;
+ }
+ info->r_sense = r_sense;
+
+ ret = of_property_read_u32(np, "lltc,prescaler-exponent",
+ &prescaler_exp);
+ if (ret < 0) {
+ dev_warn(&client->dev,
+ "lltc,prescaler-exponent not in devicetree\n");
+ prescaler_exp = LTC2941_MAX_PRESCALER_EXP;
+ }
+
+ if (info->id == LTC2943_ID) {
+ if (prescaler_exp > LTC2943_MAX_PRESCALER_EXP)
+ prescaler_exp = LTC2943_MAX_PRESCALER_EXP;
+ info->Qlsb = ((340 * 50000) / r_sense) /
+ (4096 / (1 << (2*prescaler_exp)));
+ } else {
+ if (prescaler_exp > LTC2941_MAX_PRESCALER_EXP)
+ prescaler_exp = LTC2941_MAX_PRESCALER_EXP;
+ info->Qlsb = ((85 * 50000) / r_sense) /
+ (128 / (1 << prescaler_exp));
+ }
+
+ /* Read status register to check for LTC2942 */
+ if (info->id == LTC2941_ID || info->id == LTC2942_ID) {
+ ret = ltc294x_read_regs(client, LTC294X_REG_STATUS, &status, 1);
+ if (ret < 0) {
+ dev_err(&client->dev,
+ "Could not read status register\n");
+ return ret;
+ }
+ if (status & LTC2941_REG_STATUS_CHIP_ID)
+ info->id = LTC2941_ID;
+ else
+ info->id = LTC2942_ID;
+ }
+
+ info->client = client;
+ info->supply_desc.type = POWER_SUPPLY_TYPE_BATTERY;
+ info->supply_desc.properties = ltc294x_properties;
+ switch (info->id) {
+ case LTC2944_ID:
+ case LTC2943_ID:
+ info->supply_desc.num_properties =
+ ARRAY_SIZE(ltc294x_properties);
+ break;
+ case LTC2942_ID:
+ info->supply_desc.num_properties =
+ ARRAY_SIZE(ltc294x_properties) - 1;
+ break;
+ case LTC2941_ID:
+ default:
+ info->supply_desc.num_properties =
+ ARRAY_SIZE(ltc294x_properties) - 3;
+ break;
+ }
+ info->supply_desc.get_property = ltc294x_get_property;
+ info->supply_desc.set_property = ltc294x_set_property;
+ info->supply_desc.property_is_writeable = ltc294x_property_is_writeable;
+ info->supply_desc.external_power_changed = NULL;
+
+ psy_cfg.drv_data = info;
+
+ INIT_DELAYED_WORK(&info->work, ltc294x_work);
+
+ ret = ltc294x_reset(info, prescaler_exp);
+ if (ret < 0) {
+ dev_err(&client->dev, "Communication with chip failed\n");
+ return ret;
+ }
+
+ info->supply = power_supply_register(&client->dev, &info->supply_desc,
+ &psy_cfg);
+ if (IS_ERR(info->supply)) {
+ dev_err(&client->dev, "failed to register ltc2941\n");
+ return PTR_ERR(info->supply);
+ } else {
+ schedule_delayed_work(&info->work, LTC294X_WORK_DELAY * HZ);
+ }
+
+ return 0;
+}
+
+static void ltc294x_i2c_shutdown(struct i2c_client *client)
+{
+ struct ltc294x_info *info = i2c_get_clientdata(client);
+ int ret;
+ u8 value;
+ u8 control;
+
+ /* The LTC2941 does not need any special handling */
+ if (info->id == LTC2941_ID)
+ return;
+
+ /* Read control register */
+ ret = ltc294x_read_regs(info->client, LTC294X_REG_CONTROL, &value, 1);
+ if (ret < 0)
+ return;
+
+ /* Disable continuous ADC conversion as this drains the battery */
+ control = LTC294X_REG_CONTROL_ADC_DISABLE(value);
+ if (control != value)
+ ltc294x_write_regs(info->client, LTC294X_REG_CONTROL,
+ &control, 1);
+}
+
+#ifdef CONFIG_PM_SLEEP
+
+static int ltc294x_suspend(struct device *dev)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct ltc294x_info *info = i2c_get_clientdata(client);
+
+ cancel_delayed_work(&info->work);
+ return 0;
+}
+
+static int ltc294x_resume(struct device *dev)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct ltc294x_info *info = i2c_get_clientdata(client);
+
+ schedule_delayed_work(&info->work, LTC294X_WORK_DELAY * HZ);
+ return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(ltc294x_pm_ops, ltc294x_suspend, ltc294x_resume);
+#define LTC294X_PM_OPS (&ltc294x_pm_ops)
+
+#else
+#define LTC294X_PM_OPS NULL
+#endif /* CONFIG_PM_SLEEP */
+
+
+static const struct i2c_device_id ltc294x_i2c_id[] = {
+ { "ltc2941", LTC2941_ID, },
+ { "ltc2942", LTC2942_ID, },
+ { "ltc2943", LTC2943_ID, },
+ { "ltc2944", LTC2944_ID, },
+ { },
+};
+MODULE_DEVICE_TABLE(i2c, ltc294x_i2c_id);
+
+static const struct of_device_id ltc294x_i2c_of_match[] = {
+ {
+ .compatible = "lltc,ltc2941",
+ .data = (void *)LTC2941_ID,
+ },
+ {
+ .compatible = "lltc,ltc2942",
+ .data = (void *)LTC2942_ID,
+ },
+ {
+ .compatible = "lltc,ltc2943",
+ .data = (void *)LTC2943_ID,
+ },
+ {
+ .compatible = "lltc,ltc2944",
+ .data = (void *)LTC2944_ID,
+ },
+ { },
+};
+MODULE_DEVICE_TABLE(of, ltc294x_i2c_of_match);
+
+static struct i2c_driver ltc294x_driver = {
+ .driver = {
+ .name = "LTC2941",
+ .of_match_table = ltc294x_i2c_of_match,
+ .pm = LTC294X_PM_OPS,
+ },
+ .probe = ltc294x_i2c_probe,
+ .remove = ltc294x_i2c_remove,
+ .shutdown = ltc294x_i2c_shutdown,
+ .id_table = ltc294x_i2c_id,
+};
+module_i2c_driver(ltc294x_driver);
+
+MODULE_AUTHOR("Auryn Verwegen, Topic Embedded Systems");
+MODULE_AUTHOR("Mike Looijmans, Topic Embedded Products");
+MODULE_DESCRIPTION("LTC2941/LTC2942/LTC2943/LTC2944 Battery Gas Gauge IC driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/power/supply/max14577_charger.c b/drivers/power/supply/max14577_charger.c
new file mode 100644
index 000000000..dcedae18d
--- /dev/null
+++ b/drivers/power/supply/max14577_charger.c
@@ -0,0 +1,648 @@
+// SPDX-License-Identifier: GPL-2.0+
+//
+// max14577_charger.c - Battery charger driver for the Maxim 14577/77836
+//
+// Copyright (C) 2013,2014 Samsung Electronics
+// Krzysztof Kozlowski <krzk@kernel.org>
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/power_supply.h>
+#include <linux/mfd/max14577-private.h>
+#include <linux/mfd/max14577.h>
+
+struct max14577_charger {
+ struct device *dev;
+ struct max14577 *max14577;
+ struct power_supply *charger;
+
+ struct max14577_charger_platform_data *pdata;
+};
+
+/*
+ * Helper function for mapping values of STATUS2/CHGTYP register on max14577
+ * and max77836 chipsets to enum maxim_muic_charger_type.
+ */
+static enum max14577_muic_charger_type maxim_get_charger_type(
+ enum maxim_device_type dev_type, u8 val) {
+ switch (val) {
+ case MAX14577_CHARGER_TYPE_NONE:
+ case MAX14577_CHARGER_TYPE_USB:
+ case MAX14577_CHARGER_TYPE_DOWNSTREAM_PORT:
+ case MAX14577_CHARGER_TYPE_DEDICATED_CHG:
+ case MAX14577_CHARGER_TYPE_SPECIAL_500MA:
+ case MAX14577_CHARGER_TYPE_SPECIAL_1A:
+ return val;
+ case MAX14577_CHARGER_TYPE_DEAD_BATTERY:
+ case MAX14577_CHARGER_TYPE_RESERVED:
+ if (dev_type == MAXIM_DEVICE_TYPE_MAX77836)
+ val |= 0x8;
+ return val;
+ default:
+ WARN_ONCE(1, "max14577: Unsupported chgtyp register value 0x%02x", val);
+ return val;
+ }
+}
+
+static int max14577_get_charger_state(struct max14577_charger *chg, int *val)
+{
+ struct regmap *rmap = chg->max14577->regmap;
+ int ret;
+ u8 reg_data;
+
+ /*
+ * Charging occurs only if:
+ * - CHGCTRL2/MBCHOSTEN == 1
+ * - STATUS2/CGMBC == 1
+ *
+ * TODO:
+ * - handle FULL after Top-off timer (EOC register may be off
+ * and the charger won't be charging although MBCHOSTEN is on)
+ * - handle properly dead-battery charging (respect timer)
+ * - handle timers (fast-charge and prequal) /MBCCHGERR/
+ */
+ ret = max14577_read_reg(rmap, MAX14577_CHG_REG_CHG_CTRL2, &reg_data);
+ if (ret < 0)
+ goto out;
+
+ if ((reg_data & CHGCTRL2_MBCHOSTEN_MASK) == 0) {
+ *val = POWER_SUPPLY_STATUS_DISCHARGING;
+ goto out;
+ }
+
+ ret = max14577_read_reg(rmap, MAX14577_CHG_REG_STATUS3, &reg_data);
+ if (ret < 0)
+ goto out;
+
+ if (reg_data & STATUS3_CGMBC_MASK) {
+ /* Charger or USB-cable is connected */
+ if (reg_data & STATUS3_EOC_MASK)
+ *val = POWER_SUPPLY_STATUS_FULL;
+ else
+ *val = POWER_SUPPLY_STATUS_CHARGING;
+ goto out;
+ }
+
+ *val = POWER_SUPPLY_STATUS_DISCHARGING;
+
+out:
+ return ret;
+}
+
+/*
+ * Supported charge types:
+ * - POWER_SUPPLY_CHARGE_TYPE_NONE
+ * - POWER_SUPPLY_CHARGE_TYPE_FAST
+ */
+static int max14577_get_charge_type(struct max14577_charger *chg, int *val)
+{
+ int ret, charging;
+
+ /*
+ * TODO: CHARGE_TYPE_TRICKLE (VCHGR_RC or EOC)?
+ * As spec says:
+ * [after reaching EOC interrupt]
+ * "When the battery is fully charged, the 30-minute (typ)
+ * top-off timer starts. The device continues to trickle
+ * charge the battery until the top-off timer runs out."
+ */
+ ret = max14577_get_charger_state(chg, &charging);
+ if (ret < 0)
+ return ret;
+
+ if (charging == POWER_SUPPLY_STATUS_CHARGING)
+ *val = POWER_SUPPLY_CHARGE_TYPE_FAST;
+ else
+ *val = POWER_SUPPLY_CHARGE_TYPE_NONE;
+
+ return 0;
+}
+
+static int max14577_get_online(struct max14577_charger *chg, int *val)
+{
+ struct regmap *rmap = chg->max14577->regmap;
+ u8 reg_data;
+ int ret;
+ enum max14577_muic_charger_type chg_type;
+
+ ret = max14577_read_reg(rmap, MAX14577_MUIC_REG_STATUS2, &reg_data);
+ if (ret < 0)
+ return ret;
+
+ reg_data = ((reg_data & STATUS2_CHGTYP_MASK) >> STATUS2_CHGTYP_SHIFT);
+ chg_type = maxim_get_charger_type(chg->max14577->dev_type, reg_data);
+ switch (chg_type) {
+ case MAX14577_CHARGER_TYPE_USB:
+ case MAX14577_CHARGER_TYPE_DEDICATED_CHG:
+ case MAX14577_CHARGER_TYPE_SPECIAL_500MA:
+ case MAX14577_CHARGER_TYPE_SPECIAL_1A:
+ case MAX14577_CHARGER_TYPE_DEAD_BATTERY:
+ case MAX77836_CHARGER_TYPE_SPECIAL_BIAS:
+ *val = 1;
+ break;
+ case MAX14577_CHARGER_TYPE_NONE:
+ case MAX14577_CHARGER_TYPE_DOWNSTREAM_PORT:
+ case MAX14577_CHARGER_TYPE_RESERVED:
+ case MAX77836_CHARGER_TYPE_RESERVED:
+ default:
+ *val = 0;
+ }
+
+ return 0;
+}
+
+/*
+ * Supported health statuses:
+ * - POWER_SUPPLY_HEALTH_DEAD
+ * - POWER_SUPPLY_HEALTH_OVERVOLTAGE
+ * - POWER_SUPPLY_HEALTH_GOOD
+ */
+static int max14577_get_battery_health(struct max14577_charger *chg, int *val)
+{
+ struct regmap *rmap = chg->max14577->regmap;
+ int ret;
+ u8 reg_data;
+ enum max14577_muic_charger_type chg_type;
+
+ ret = max14577_read_reg(rmap, MAX14577_MUIC_REG_STATUS2, &reg_data);
+ if (ret < 0)
+ goto out;
+
+ reg_data = ((reg_data & STATUS2_CHGTYP_MASK) >> STATUS2_CHGTYP_SHIFT);
+ chg_type = maxim_get_charger_type(chg->max14577->dev_type, reg_data);
+ if (chg_type == MAX14577_CHARGER_TYPE_DEAD_BATTERY) {
+ *val = POWER_SUPPLY_HEALTH_DEAD;
+ goto out;
+ }
+
+ ret = max14577_read_reg(rmap, MAX14577_CHG_REG_STATUS3, &reg_data);
+ if (ret < 0)
+ goto out;
+
+ if (reg_data & STATUS3_OVP_MASK) {
+ *val = POWER_SUPPLY_HEALTH_OVERVOLTAGE;
+ goto out;
+ }
+
+ /* Not dead, not overvoltage */
+ *val = POWER_SUPPLY_HEALTH_GOOD;
+
+out:
+ return ret;
+}
+
+/*
+ * Always returns 1.
+ * The max14577 chip doesn't report any status of battery presence.
+ * Lets assume that it will always be used with some battery.
+ */
+static int max14577_get_present(struct max14577_charger *chg, int *val)
+{
+ *val = 1;
+
+ return 0;
+}
+
+static int max14577_set_fast_charge_timer(struct max14577_charger *chg,
+ unsigned long hours)
+{
+ u8 reg_data;
+
+ switch (hours) {
+ case 5 ... 7:
+ reg_data = hours - 3;
+ break;
+ case 0:
+ /* Disable */
+ reg_data = 0x7;
+ break;
+ default:
+ dev_err(chg->dev, "Wrong value for Fast-Charge Timer: %lu\n",
+ hours);
+ return -EINVAL;
+ }
+ reg_data <<= CHGCTRL1_TCHW_SHIFT;
+
+ return max14577_update_reg(chg->max14577->regmap,
+ MAX14577_REG_CHGCTRL1, CHGCTRL1_TCHW_MASK, reg_data);
+}
+
+static int max14577_init_constant_voltage(struct max14577_charger *chg,
+ unsigned int uvolt)
+{
+ u8 reg_data;
+
+ if (uvolt < MAXIM_CHARGER_CONSTANT_VOLTAGE_MIN ||
+ uvolt > MAXIM_CHARGER_CONSTANT_VOLTAGE_MAX)
+ return -EINVAL;
+
+ if (uvolt == 4200000)
+ reg_data = 0x0;
+ else if (uvolt == MAXIM_CHARGER_CONSTANT_VOLTAGE_MAX)
+ reg_data = 0x1f;
+ else if (uvolt <= 4280000) {
+ unsigned int val = uvolt;
+
+ val -= MAXIM_CHARGER_CONSTANT_VOLTAGE_MIN;
+ val /= MAXIM_CHARGER_CONSTANT_VOLTAGE_STEP;
+ if (uvolt <= 4180000)
+ reg_data = 0x1 + val;
+ else
+ reg_data = val; /* Fix for gap between 4.18V and 4.22V */
+ } else
+ return -EINVAL;
+
+ reg_data <<= CHGCTRL3_MBCCVWRC_SHIFT;
+
+ return max14577_write_reg(chg->max14577->regmap,
+ MAX14577_CHG_REG_CHG_CTRL3, reg_data);
+}
+
+static int max14577_init_eoc(struct max14577_charger *chg,
+ unsigned int uamp)
+{
+ unsigned int current_bits = 0xf;
+ u8 reg_data;
+
+ switch (chg->max14577->dev_type) {
+ case MAXIM_DEVICE_TYPE_MAX77836:
+ if (uamp < 5000)
+ return -EINVAL; /* Requested current is too low */
+
+ if (uamp >= 7500 && uamp < 10000)
+ current_bits = 0x0;
+ else if (uamp <= 50000) {
+ /* <5000, 7499> and <10000, 50000> */
+ current_bits = uamp / 5000;
+ } else {
+ uamp = min(uamp, 100000U) - 50000U;
+ current_bits = 0xa + uamp / 10000;
+ }
+ break;
+
+ case MAXIM_DEVICE_TYPE_MAX14577:
+ default:
+ if (uamp < MAX14577_CHARGER_EOC_CURRENT_LIMIT_MIN)
+ return -EINVAL; /* Requested current is too low */
+
+ uamp = min(uamp, MAX14577_CHARGER_EOC_CURRENT_LIMIT_MAX);
+ uamp -= MAX14577_CHARGER_EOC_CURRENT_LIMIT_MIN;
+ current_bits = uamp / MAX14577_CHARGER_EOC_CURRENT_LIMIT_STEP;
+ break;
+ }
+
+ reg_data = current_bits << CHGCTRL5_EOCS_SHIFT;
+
+ return max14577_update_reg(chg->max14577->regmap,
+ MAX14577_CHG_REG_CHG_CTRL5, CHGCTRL5_EOCS_MASK,
+ reg_data);
+}
+
+static int max14577_init_fast_charge(struct max14577_charger *chg,
+ unsigned int uamp)
+{
+ u8 reg_data;
+ int ret;
+ const struct maxim_charger_current *limits =
+ &maxim_charger_currents[chg->max14577->dev_type];
+
+ ret = maxim_charger_calc_reg_current(limits, uamp, uamp, &reg_data);
+ if (ret) {
+ dev_err(chg->dev, "Wrong value for fast charge: %u\n", uamp);
+ return ret;
+ }
+
+ return max14577_update_reg(chg->max14577->regmap,
+ MAX14577_CHG_REG_CHG_CTRL4,
+ CHGCTRL4_MBCICHWRCL_MASK | CHGCTRL4_MBCICHWRCH_MASK,
+ reg_data);
+}
+
+/*
+ * Sets charger registers to proper and safe default values.
+ * Some of these values are equal to defaults in MAX14577E
+ * data sheet but there are minor differences.
+ */
+static int max14577_charger_reg_init(struct max14577_charger *chg)
+{
+ struct regmap *rmap = chg->max14577->regmap;
+ u8 reg_data;
+ int ret;
+
+ /*
+ * Charger-Type Manual Detection, default off (set CHGTYPMAN to 0)
+ * Charger-Detection Enable, default on (set CHGDETEN to 1)
+ * Combined mask of CHGDETEN and CHGTYPMAN will zero the CHGTYPMAN bit
+ */
+ reg_data = 0x1 << CDETCTRL1_CHGDETEN_SHIFT;
+ max14577_update_reg(rmap, MAX14577_REG_CDETCTRL1,
+ CDETCTRL1_CHGDETEN_MASK | CDETCTRL1_CHGTYPMAN_MASK,
+ reg_data);
+
+ /*
+ * Wall-Adapter Rapid Charge, default on
+ * Battery-Charger, default on
+ */
+ reg_data = 0x1 << CHGCTRL2_VCHGR_RC_SHIFT;
+ reg_data |= 0x1 << CHGCTRL2_MBCHOSTEN_SHIFT;
+ max14577_write_reg(rmap, MAX14577_REG_CHGCTRL2, reg_data);
+
+ /* Auto Charging Stop, default off */
+ reg_data = 0x0 << CHGCTRL6_AUTOSTOP_SHIFT;
+ max14577_write_reg(rmap, MAX14577_REG_CHGCTRL6, reg_data);
+
+ ret = max14577_init_constant_voltage(chg, chg->pdata->constant_uvolt);
+ if (ret)
+ return ret;
+
+ ret = max14577_init_eoc(chg, chg->pdata->eoc_uamp);
+ if (ret)
+ return ret;
+
+ ret = max14577_init_fast_charge(chg, chg->pdata->fast_charge_uamp);
+ if (ret)
+ return ret;
+
+ ret = max14577_set_fast_charge_timer(chg,
+ MAXIM_CHARGER_FAST_CHARGE_TIMER_DEFAULT);
+ if (ret)
+ return ret;
+
+ /* Initialize Overvoltage-Protection Threshold */
+ switch (chg->pdata->ovp_uvolt) {
+ case 7500000:
+ reg_data = 0x0;
+ break;
+ case 6000000:
+ case 6500000:
+ case 7000000:
+ reg_data = 0x1 + (chg->pdata->ovp_uvolt - 6000000) / 500000;
+ break;
+ default:
+ dev_err(chg->dev, "Wrong value for OVP: %u\n",
+ chg->pdata->ovp_uvolt);
+ return -EINVAL;
+ }
+ reg_data <<= CHGCTRL7_OTPCGHCVS_SHIFT;
+ max14577_write_reg(rmap, MAX14577_REG_CHGCTRL7, reg_data);
+
+ return 0;
+}
+
+/* Support property from charger */
+static enum power_supply_property max14577_charger_props[] = {
+ POWER_SUPPLY_PROP_STATUS,
+ POWER_SUPPLY_PROP_CHARGE_TYPE,
+ POWER_SUPPLY_PROP_HEALTH,
+ POWER_SUPPLY_PROP_PRESENT,
+ POWER_SUPPLY_PROP_ONLINE,
+ POWER_SUPPLY_PROP_MODEL_NAME,
+ POWER_SUPPLY_PROP_MANUFACTURER,
+};
+
+static const char * const model_names[] = {
+ [MAXIM_DEVICE_TYPE_UNKNOWN] = "MAX14577-like",
+ [MAXIM_DEVICE_TYPE_MAX14577] = "MAX14577",
+ [MAXIM_DEVICE_TYPE_MAX77836] = "MAX77836",
+};
+static const char *manufacturer = "Maxim Integrated";
+
+static int max14577_charger_get_property(struct power_supply *psy,
+ enum power_supply_property psp,
+ union power_supply_propval *val)
+{
+ struct max14577_charger *chg = power_supply_get_drvdata(psy);
+ int ret = 0;
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_STATUS:
+ ret = max14577_get_charger_state(chg, &val->intval);
+ break;
+ case POWER_SUPPLY_PROP_CHARGE_TYPE:
+ ret = max14577_get_charge_type(chg, &val->intval);
+ break;
+ case POWER_SUPPLY_PROP_HEALTH:
+ ret = max14577_get_battery_health(chg, &val->intval);
+ break;
+ case POWER_SUPPLY_PROP_PRESENT:
+ ret = max14577_get_present(chg, &val->intval);
+ break;
+ case POWER_SUPPLY_PROP_ONLINE:
+ ret = max14577_get_online(chg, &val->intval);
+ break;
+ case POWER_SUPPLY_PROP_MODEL_NAME:
+ BUILD_BUG_ON(ARRAY_SIZE(model_names) != MAXIM_DEVICE_TYPE_NUM);
+ val->strval = model_names[chg->max14577->dev_type];
+ break;
+ case POWER_SUPPLY_PROP_MANUFACTURER:
+ val->strval = manufacturer;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return ret;
+}
+
+static const struct power_supply_desc max14577_charger_desc = {
+ .name = "max14577-charger",
+ .type = POWER_SUPPLY_TYPE_BATTERY,
+ .properties = max14577_charger_props,
+ .num_properties = ARRAY_SIZE(max14577_charger_props),
+ .get_property = max14577_charger_get_property,
+};
+
+#ifdef CONFIG_OF
+static struct max14577_charger_platform_data *max14577_charger_dt_init(
+ struct platform_device *pdev)
+{
+ struct max14577_charger_platform_data *pdata;
+ struct device_node *np = pdev->dev.of_node;
+ int ret;
+
+ if (!np) {
+ dev_err(&pdev->dev, "No charger OF node\n");
+ return ERR_PTR(-EINVAL);
+ }
+
+ pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
+ if (!pdata)
+ return ERR_PTR(-ENOMEM);
+
+ ret = of_property_read_u32(np, "maxim,constant-uvolt",
+ &pdata->constant_uvolt);
+ if (ret) {
+ dev_err(&pdev->dev, "Cannot parse maxim,constant-uvolt field from DT\n");
+ return ERR_PTR(ret);
+ }
+
+ ret = of_property_read_u32(np, "maxim,fast-charge-uamp",
+ &pdata->fast_charge_uamp);
+ if (ret) {
+ dev_err(&pdev->dev, "Cannot parse maxim,fast-charge-uamp field from DT\n");
+ return ERR_PTR(ret);
+ }
+
+ ret = of_property_read_u32(np, "maxim,eoc-uamp", &pdata->eoc_uamp);
+ if (ret) {
+ dev_err(&pdev->dev, "Cannot parse maxim,eoc-uamp field from DT\n");
+ return ERR_PTR(ret);
+ }
+
+ ret = of_property_read_u32(np, "maxim,ovp-uvolt", &pdata->ovp_uvolt);
+ if (ret) {
+ dev_err(&pdev->dev, "Cannot parse maxim,ovp-uvolt field from DT\n");
+ return ERR_PTR(ret);
+ }
+
+ return pdata;
+}
+#else /* CONFIG_OF */
+static struct max14577_charger_platform_data *max14577_charger_dt_init(
+ struct platform_device *pdev)
+{
+ return NULL;
+}
+#endif /* CONFIG_OF */
+
+static ssize_t show_fast_charge_timer(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct max14577_charger *chg = dev_get_drvdata(dev);
+ u8 reg_data;
+ int ret;
+ unsigned int val;
+
+ ret = max14577_read_reg(chg->max14577->regmap, MAX14577_REG_CHGCTRL1,
+ &reg_data);
+ if (ret)
+ return ret;
+
+ reg_data &= CHGCTRL1_TCHW_MASK;
+ reg_data >>= CHGCTRL1_TCHW_SHIFT;
+ switch (reg_data) {
+ case 0x2 ... 0x4:
+ val = reg_data + 3;
+ break;
+ case 0x7:
+ val = 0;
+ break;
+ default:
+ val = 5;
+ break;
+ }
+
+ return scnprintf(buf, PAGE_SIZE, "%u\n", val);
+}
+
+static ssize_t store_fast_charge_timer(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t count)
+{
+ struct max14577_charger *chg = dev_get_drvdata(dev);
+ unsigned long val;
+ int ret;
+
+ ret = kstrtoul(buf, 10, &val);
+ if (ret)
+ return ret;
+
+ ret = max14577_set_fast_charge_timer(chg, val);
+ if (ret)
+ return ret;
+
+ return count;
+}
+
+static DEVICE_ATTR(fast_charge_timer, S_IRUGO | S_IWUSR,
+ show_fast_charge_timer, store_fast_charge_timer);
+
+static int max14577_charger_probe(struct platform_device *pdev)
+{
+ struct max14577_charger *chg;
+ struct power_supply_config psy_cfg = {};
+ struct max14577 *max14577 = dev_get_drvdata(pdev->dev.parent);
+ int ret;
+
+ chg = devm_kzalloc(&pdev->dev, sizeof(*chg), GFP_KERNEL);
+ if (!chg)
+ return -ENOMEM;
+
+ platform_set_drvdata(pdev, chg);
+ chg->dev = &pdev->dev;
+ chg->max14577 = max14577;
+
+ chg->pdata = max14577_charger_dt_init(pdev);
+ if (IS_ERR_OR_NULL(chg->pdata))
+ return PTR_ERR(chg->pdata);
+
+ ret = max14577_charger_reg_init(chg);
+ if (ret)
+ return ret;
+
+ ret = device_create_file(&pdev->dev, &dev_attr_fast_charge_timer);
+ if (ret) {
+ dev_err(&pdev->dev, "failed: create sysfs entry\n");
+ return ret;
+ }
+
+ psy_cfg.drv_data = chg;
+ chg->charger = power_supply_register(&pdev->dev, &max14577_charger_desc,
+ &psy_cfg);
+ if (IS_ERR(chg->charger)) {
+ dev_err(&pdev->dev, "failed: power supply register\n");
+ ret = PTR_ERR(chg->charger);
+ goto err;
+ }
+
+ /* Check for valid values for charger */
+ BUILD_BUG_ON(MAX14577_CHARGER_EOC_CURRENT_LIMIT_MIN +
+ MAX14577_CHARGER_EOC_CURRENT_LIMIT_STEP * 0xf !=
+ MAX14577_CHARGER_EOC_CURRENT_LIMIT_MAX);
+ return 0;
+
+err:
+ device_remove_file(&pdev->dev, &dev_attr_fast_charge_timer);
+
+ return ret;
+}
+
+static int max14577_charger_remove(struct platform_device *pdev)
+{
+ struct max14577_charger *chg = platform_get_drvdata(pdev);
+
+ device_remove_file(&pdev->dev, &dev_attr_fast_charge_timer);
+ power_supply_unregister(chg->charger);
+
+ return 0;
+}
+
+static const struct platform_device_id max14577_charger_id[] = {
+ { "max14577-charger", MAXIM_DEVICE_TYPE_MAX14577, },
+ { "max77836-charger", MAXIM_DEVICE_TYPE_MAX77836, },
+ { }
+};
+MODULE_DEVICE_TABLE(platform, max14577_charger_id);
+
+static const struct of_device_id of_max14577_charger_dt_match[] = {
+ { .compatible = "maxim,max14577-charger",
+ .data = (void *)MAXIM_DEVICE_TYPE_MAX14577, },
+ { .compatible = "maxim,max77836-charger",
+ .data = (void *)MAXIM_DEVICE_TYPE_MAX77836, },
+ { },
+};
+MODULE_DEVICE_TABLE(of, of_max14577_charger_dt_match);
+
+static struct platform_driver max14577_charger_driver = {
+ .driver = {
+ .name = "max14577-charger",
+ .of_match_table = of_max14577_charger_dt_match,
+ },
+ .probe = max14577_charger_probe,
+ .remove = max14577_charger_remove,
+ .id_table = max14577_charger_id,
+};
+module_platform_driver(max14577_charger_driver);
+
+MODULE_AUTHOR("Krzysztof Kozlowski <krzk@kernel.org>");
+MODULE_DESCRIPTION("Maxim 14577/77836 charger driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/power/supply/max14656_charger_detector.c b/drivers/power/supply/max14656_charger_detector.c
new file mode 100644
index 000000000..137f9fafc
--- /dev/null
+++ b/drivers/power/supply/max14656_charger_detector.c
@@ -0,0 +1,335 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Maxim MAX14656 / AL32 USB Charger Detector driver
+ *
+ * Copyright (C) 2014 LG Electronics, Inc
+ * Copyright (C) 2016 Alexander Kurz <akurz@blala.de>
+ *
+ * Components from Maxim AL32 Charger detection Driver for MX50 Yoshi Board
+ * Copyright (C) Amazon Technologies Inc. All rights reserved.
+ * Manish Lachwani (lachwani@lab126.com)
+ */
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/slab.h>
+#include <linux/gpio.h>
+#include <linux/of_gpio.h>
+#include <linux/of_device.h>
+#include <linux/workqueue.h>
+#include <linux/power_supply.h>
+
+#define MAX14656_MANUFACTURER "Maxim Integrated"
+#define MAX14656_NAME "max14656"
+
+#define MAX14656_DEVICE_ID 0x00
+#define MAX14656_INTERRUPT_1 0x01
+#define MAX14656_INTERRUPT_2 0x02
+#define MAX14656_STATUS_1 0x03
+#define MAX14656_STATUS_2 0x04
+#define MAX14656_INTMASK_1 0x05
+#define MAX14656_INTMASK_2 0x06
+#define MAX14656_CONTROL_1 0x07
+#define MAX14656_CONTROL_2 0x08
+#define MAX14656_CONTROL_3 0x09
+
+#define DEVICE_VENDOR_MASK 0xf0
+#define DEVICE_REV_MASK 0x0f
+#define INT_EN_REG_MASK BIT(4)
+#define CHG_TYPE_INT_MASK BIT(0)
+#define STATUS1_VB_VALID_MASK BIT(4)
+#define STATUS1_CHG_TYPE_MASK 0xf
+#define INT1_DCD_TIMEOUT_MASK BIT(7)
+#define CONTROL1_DEFAULT 0x0d
+#define CONTROL1_INT_EN BIT(4)
+#define CONTROL1_INT_ACTIVE_HIGH BIT(5)
+#define CONTROL1_EDGE BIT(7)
+#define CONTROL2_DEFAULT 0x8e
+#define CONTROL2_ADC_EN BIT(0)
+#define CONTROL3_DEFAULT 0x8d
+
+enum max14656_chg_type {
+ MAX14656_NO_CHARGER = 0,
+ MAX14656_SDP_CHARGER,
+ MAX14656_CDP_CHARGER,
+ MAX14656_DCP_CHARGER,
+ MAX14656_APPLE_500MA_CHARGER,
+ MAX14656_APPLE_1A_CHARGER,
+ MAX14656_APPLE_2A_CHARGER,
+ MAX14656_SPECIAL_500MA_CHARGER,
+ MAX14656_APPLE_12W,
+ MAX14656_CHARGER_LAST
+};
+
+static const struct max14656_chg_type_props {
+ enum power_supply_type type;
+} chg_type_props[] = {
+ { POWER_SUPPLY_TYPE_UNKNOWN },
+ { POWER_SUPPLY_TYPE_USB },
+ { POWER_SUPPLY_TYPE_USB_CDP },
+ { POWER_SUPPLY_TYPE_USB_DCP },
+ { POWER_SUPPLY_TYPE_USB_DCP },
+ { POWER_SUPPLY_TYPE_USB_DCP },
+ { POWER_SUPPLY_TYPE_USB_DCP },
+ { POWER_SUPPLY_TYPE_USB_DCP },
+ { POWER_SUPPLY_TYPE_USB },
+};
+
+struct max14656_chip {
+ struct i2c_client *client;
+ struct power_supply *detect_psy;
+ struct power_supply_desc psy_desc;
+ struct delayed_work irq_work;
+
+ int irq;
+ int online;
+};
+
+static int max14656_read_reg(struct i2c_client *client, int reg, u8 *val)
+{
+ s32 ret;
+
+ ret = i2c_smbus_read_byte_data(client, reg);
+ if (ret < 0) {
+ dev_err(&client->dev,
+ "i2c read fail: can't read from %02x: %d\n",
+ reg, ret);
+ return ret;
+ }
+ *val = ret;
+ return 0;
+}
+
+static int max14656_write_reg(struct i2c_client *client, int reg, u8 val)
+{
+ s32 ret;
+
+ ret = i2c_smbus_write_byte_data(client, reg, val);
+ if (ret < 0) {
+ dev_err(&client->dev,
+ "i2c write fail: can't write %02x to %02x: %d\n",
+ val, reg, ret);
+ return ret;
+ }
+ return 0;
+}
+
+static int max14656_read_block_reg(struct i2c_client *client, u8 reg,
+ u8 length, u8 *val)
+{
+ int ret;
+
+ ret = i2c_smbus_read_i2c_block_data(client, reg, length, val);
+ if (ret < 0) {
+ dev_err(&client->dev, "failed to block read reg 0x%x: %d\n",
+ reg, ret);
+ return ret;
+ }
+
+ return 0;
+}
+
+#define REG_TOTAL_NUM 5
+static void max14656_irq_worker(struct work_struct *work)
+{
+ struct max14656_chip *chip =
+ container_of(work, struct max14656_chip, irq_work.work);
+
+ u8 buf[REG_TOTAL_NUM];
+ u8 chg_type;
+
+ max14656_read_block_reg(chip->client, MAX14656_DEVICE_ID,
+ REG_TOTAL_NUM, buf);
+
+ if ((buf[MAX14656_STATUS_1] & STATUS1_VB_VALID_MASK) &&
+ (buf[MAX14656_STATUS_1] & STATUS1_CHG_TYPE_MASK)) {
+ chg_type = buf[MAX14656_STATUS_1] & STATUS1_CHG_TYPE_MASK;
+ if (chg_type < MAX14656_CHARGER_LAST)
+ chip->psy_desc.type = chg_type_props[chg_type].type;
+ else
+ chip->psy_desc.type = POWER_SUPPLY_TYPE_UNKNOWN;
+ chip->online = 1;
+ } else {
+ chip->online = 0;
+ chip->psy_desc.type = POWER_SUPPLY_TYPE_UNKNOWN;
+ }
+
+ power_supply_changed(chip->detect_psy);
+}
+
+static irqreturn_t max14656_irq(int irq, void *dev_id)
+{
+ struct max14656_chip *chip = dev_id;
+
+ schedule_delayed_work(&chip->irq_work, msecs_to_jiffies(100));
+
+ return IRQ_HANDLED;
+}
+
+static int max14656_hw_init(struct max14656_chip *chip)
+{
+ uint8_t val = 0;
+ uint8_t rev;
+ struct i2c_client *client = chip->client;
+
+ if (max14656_read_reg(client, MAX14656_DEVICE_ID, &val))
+ return -ENODEV;
+
+ if ((val & DEVICE_VENDOR_MASK) != 0x20) {
+ dev_err(&client->dev, "wrong vendor ID %d\n",
+ ((val & DEVICE_VENDOR_MASK) >> 4));
+ return -ENODEV;
+ }
+ rev = val & DEVICE_REV_MASK;
+
+ /* Turn on ADC_EN */
+ if (max14656_write_reg(client, MAX14656_CONTROL_2, CONTROL2_ADC_EN))
+ return -EINVAL;
+
+ /* turn on interrupts and low power mode */
+ if (max14656_write_reg(client, MAX14656_CONTROL_1,
+ CONTROL1_DEFAULT |
+ CONTROL1_INT_EN |
+ CONTROL1_INT_ACTIVE_HIGH |
+ CONTROL1_EDGE))
+ return -EINVAL;
+
+ if (max14656_write_reg(client, MAX14656_INTMASK_1, 0x3))
+ return -EINVAL;
+
+ if (max14656_write_reg(client, MAX14656_INTMASK_2, 0x1))
+ return -EINVAL;
+
+ dev_info(&client->dev, "detected revision %d\n", rev);
+ return 0;
+}
+
+static int max14656_get_property(struct power_supply *psy,
+ enum power_supply_property psp,
+ union power_supply_propval *val)
+{
+ struct max14656_chip *chip = power_supply_get_drvdata(psy);
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_ONLINE:
+ val->intval = chip->online;
+ break;
+ case POWER_SUPPLY_PROP_MODEL_NAME:
+ val->strval = MAX14656_NAME;
+ break;
+ case POWER_SUPPLY_PROP_MANUFACTURER:
+ val->strval = MAX14656_MANUFACTURER;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static enum power_supply_property max14656_battery_props[] = {
+ POWER_SUPPLY_PROP_ONLINE,
+ POWER_SUPPLY_PROP_MODEL_NAME,
+ POWER_SUPPLY_PROP_MANUFACTURER,
+};
+
+static void stop_irq_work(void *data)
+{
+ struct max14656_chip *chip = data;
+
+ cancel_delayed_work_sync(&chip->irq_work);
+}
+
+
+static int max14656_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct i2c_adapter *adapter = client->adapter;
+ struct device *dev = &client->dev;
+ struct power_supply_config psy_cfg = {};
+ struct max14656_chip *chip;
+ int irq = client->irq;
+ int ret = 0;
+
+ if (irq <= 0) {
+ dev_err(dev, "invalid irq number: %d\n", irq);
+ return -ENODEV;
+ }
+
+ if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) {
+ dev_err(dev, "No support for SMBUS_BYTE_DATA\n");
+ return -ENODEV;
+ }
+
+ chip = devm_kzalloc(dev, sizeof(*chip), GFP_KERNEL);
+ if (!chip)
+ return -ENOMEM;
+
+ psy_cfg.drv_data = chip;
+ chip->client = client;
+ chip->online = 0;
+ chip->psy_desc.name = MAX14656_NAME;
+ chip->psy_desc.type = POWER_SUPPLY_TYPE_UNKNOWN;
+ chip->psy_desc.properties = max14656_battery_props;
+ chip->psy_desc.num_properties = ARRAY_SIZE(max14656_battery_props);
+ chip->psy_desc.get_property = max14656_get_property;
+ chip->irq = irq;
+
+ ret = max14656_hw_init(chip);
+ if (ret)
+ return -ENODEV;
+
+ chip->detect_psy = devm_power_supply_register(dev,
+ &chip->psy_desc, &psy_cfg);
+ if (IS_ERR(chip->detect_psy)) {
+ dev_err(dev, "power_supply_register failed\n");
+ return -EINVAL;
+ }
+
+ INIT_DELAYED_WORK(&chip->irq_work, max14656_irq_worker);
+ ret = devm_add_action(dev, stop_irq_work, chip);
+ if (ret) {
+ dev_err(dev, "devm_add_action %d failed\n", ret);
+ return ret;
+ }
+
+ ret = devm_request_irq(dev, chip->irq, max14656_irq,
+ IRQF_TRIGGER_FALLING,
+ MAX14656_NAME, chip);
+ if (ret) {
+ dev_err(dev, "request_irq %d failed\n", chip->irq);
+ return -EINVAL;
+ }
+ enable_irq_wake(chip->irq);
+
+ schedule_delayed_work(&chip->irq_work, msecs_to_jiffies(2000));
+
+ return 0;
+}
+
+static const struct i2c_device_id max14656_id[] = {
+ { "max14656", 0 },
+ {}
+};
+MODULE_DEVICE_TABLE(i2c, max14656_id);
+
+static const struct of_device_id max14656_match_table[] = {
+ { .compatible = "maxim,max14656", },
+ {}
+};
+MODULE_DEVICE_TABLE(of, max14656_match_table);
+
+static struct i2c_driver max14656_i2c_driver = {
+ .driver = {
+ .name = "max14656",
+ .of_match_table = max14656_match_table,
+ },
+ .probe = max14656_probe,
+ .id_table = max14656_id,
+};
+module_i2c_driver(max14656_i2c_driver);
+
+MODULE_DESCRIPTION("MAX14656 USB charger detector");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/power/supply/max17040_battery.c b/drivers/power/supply/max17040_battery.c
new file mode 100644
index 000000000..b6b29ec3d
--- /dev/null
+++ b/drivers/power/supply/max17040_battery.c
@@ -0,0 +1,643 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// max17040_battery.c
+// fuel-gauge systems for lithium-ion (Li+) batteries
+//
+// Copyright (C) 2009 Samsung Electronics
+// Minkyu Kang <mk7.kang@samsung.com>
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mutex.h>
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/power_supply.h>
+#include <linux/of_device.h>
+#include <linux/max17040_battery.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+
+#define MAX17040_VCELL 0x02
+#define MAX17040_SOC 0x04
+#define MAX17040_MODE 0x06
+#define MAX17040_VER 0x08
+#define MAX17040_CONFIG 0x0C
+#define MAX17040_STATUS 0x1A
+#define MAX17040_CMD 0xFE
+
+
+#define MAX17040_DELAY 1000
+#define MAX17040_BATTERY_FULL 95
+#define MAX17040_RCOMP_DEFAULT 0x9700
+
+#define MAX17040_ATHD_MASK 0x3f
+#define MAX17040_ALSC_MASK 0x40
+#define MAX17040_ATHD_DEFAULT_POWER_UP 4
+#define MAX17040_STATUS_HD_MASK 0x1000
+#define MAX17040_STATUS_SC_MASK 0x2000
+#define MAX17040_CFG_RCOMP_MASK 0xff00
+
+enum chip_id {
+ ID_MAX17040,
+ ID_MAX17041,
+ ID_MAX17043,
+ ID_MAX17044,
+ ID_MAX17048,
+ ID_MAX17049,
+ ID_MAX17058,
+ ID_MAX17059,
+};
+
+/* values that differ by chip_id */
+struct chip_data {
+ u16 reset_val;
+ u16 vcell_shift;
+ u16 vcell_mul;
+ u16 vcell_div;
+ u8 has_low_soc_alert;
+ u8 rcomp_bytes;
+ u8 has_soc_alert;
+};
+
+static struct chip_data max17040_family[] = {
+ [ID_MAX17040] = {
+ .reset_val = 0x0054,
+ .vcell_shift = 4,
+ .vcell_mul = 1250,
+ .vcell_div = 1,
+ .has_low_soc_alert = 0,
+ .rcomp_bytes = 2,
+ .has_soc_alert = 0,
+ },
+ [ID_MAX17041] = {
+ .reset_val = 0x0054,
+ .vcell_shift = 4,
+ .vcell_mul = 2500,
+ .vcell_div = 1,
+ .has_low_soc_alert = 0,
+ .rcomp_bytes = 2,
+ .has_soc_alert = 0,
+ },
+ [ID_MAX17043] = {
+ .reset_val = 0x0054,
+ .vcell_shift = 4,
+ .vcell_mul = 1250,
+ .vcell_div = 1,
+ .has_low_soc_alert = 1,
+ .rcomp_bytes = 1,
+ .has_soc_alert = 0,
+ },
+ [ID_MAX17044] = {
+ .reset_val = 0x0054,
+ .vcell_shift = 4,
+ .vcell_mul = 2500,
+ .vcell_div = 1,
+ .has_low_soc_alert = 1,
+ .rcomp_bytes = 1,
+ .has_soc_alert = 0,
+ },
+ [ID_MAX17048] = {
+ .reset_val = 0x5400,
+ .vcell_shift = 0,
+ .vcell_mul = 625,
+ .vcell_div = 8,
+ .has_low_soc_alert = 1,
+ .rcomp_bytes = 1,
+ .has_soc_alert = 1,
+ },
+ [ID_MAX17049] = {
+ .reset_val = 0x5400,
+ .vcell_shift = 0,
+ .vcell_mul = 625,
+ .vcell_div = 4,
+ .has_low_soc_alert = 1,
+ .rcomp_bytes = 1,
+ .has_soc_alert = 1,
+ },
+ [ID_MAX17058] = {
+ .reset_val = 0x5400,
+ .vcell_shift = 0,
+ .vcell_mul = 625,
+ .vcell_div = 8,
+ .has_low_soc_alert = 1,
+ .rcomp_bytes = 1,
+ .has_soc_alert = 0,
+ },
+ [ID_MAX17059] = {
+ .reset_val = 0x5400,
+ .vcell_shift = 0,
+ .vcell_mul = 625,
+ .vcell_div = 4,
+ .has_low_soc_alert = 1,
+ .rcomp_bytes = 1,
+ .has_soc_alert = 0,
+ },
+};
+
+struct max17040_chip {
+ struct i2c_client *client;
+ struct regmap *regmap;
+ struct delayed_work work;
+ struct power_supply *battery;
+ struct max17040_platform_data *pdata;
+ struct chip_data data;
+
+ /* battery capacity */
+ int soc;
+ /* State Of Charge */
+ int status;
+ /* Low alert threshold from 32% to 1% of the State of Charge */
+ u32 low_soc_alert;
+ /* some devices return twice the capacity */
+ bool quirk_double_soc;
+ /* higher 8 bits for 17043+, 16 bits for 17040,41 */
+ u16 rcomp;
+};
+
+static int max17040_reset(struct max17040_chip *chip)
+{
+ return regmap_write(chip->regmap, MAX17040_CMD, chip->data.reset_val);
+}
+
+static int max17040_set_low_soc_alert(struct max17040_chip *chip, u32 level)
+{
+ level = 32 - level * (chip->quirk_double_soc ? 2 : 1);
+ return regmap_update_bits(chip->regmap, MAX17040_CONFIG,
+ MAX17040_ATHD_MASK, level);
+}
+
+static int max17040_set_soc_alert(struct max17040_chip *chip, bool enable)
+{
+ return regmap_update_bits(chip->regmap, MAX17040_CONFIG,
+ MAX17040_ALSC_MASK, enable ? MAX17040_ALSC_MASK : 0);
+}
+
+static int max17040_set_rcomp(struct max17040_chip *chip, u16 rcomp)
+{
+ u16 mask = chip->data.rcomp_bytes == 2 ?
+ 0xffff : MAX17040_CFG_RCOMP_MASK;
+
+ return regmap_update_bits(chip->regmap, MAX17040_CONFIG, mask, rcomp);
+}
+
+static int max17040_raw_vcell_to_uvolts(struct max17040_chip *chip, u16 vcell)
+{
+ struct chip_data *d = &chip->data;
+
+ return (vcell >> d->vcell_shift) * d->vcell_mul / d->vcell_div;
+}
+
+
+static int max17040_get_vcell(struct max17040_chip *chip)
+{
+ u32 vcell;
+
+ regmap_read(chip->regmap, MAX17040_VCELL, &vcell);
+
+ return max17040_raw_vcell_to_uvolts(chip, vcell);
+}
+
+static int max17040_get_soc(struct max17040_chip *chip)
+{
+ u32 soc;
+
+ regmap_read(chip->regmap, MAX17040_SOC, &soc);
+
+ return soc >> (chip->quirk_double_soc ? 9 : 8);
+}
+
+static int max17040_get_version(struct max17040_chip *chip)
+{
+ int ret;
+ u32 version;
+
+ ret = regmap_read(chip->regmap, MAX17040_VER, &version);
+
+ return ret ? ret : version;
+}
+
+static int max17040_get_online(struct max17040_chip *chip)
+{
+ return chip->pdata && chip->pdata->battery_online ?
+ chip->pdata->battery_online() : 1;
+}
+
+static int max17040_get_status(struct max17040_chip *chip)
+{
+ if (!chip->pdata || !chip->pdata->charger_online
+ || !chip->pdata->charger_enable)
+ return POWER_SUPPLY_STATUS_UNKNOWN;
+
+ if (max17040_get_soc(chip) > MAX17040_BATTERY_FULL)
+ return POWER_SUPPLY_STATUS_FULL;
+
+ if (chip->pdata->charger_online())
+ if (chip->pdata->charger_enable())
+ return POWER_SUPPLY_STATUS_CHARGING;
+ else
+ return POWER_SUPPLY_STATUS_NOT_CHARGING;
+ else
+ return POWER_SUPPLY_STATUS_DISCHARGING;
+}
+
+static int max17040_get_of_data(struct max17040_chip *chip)
+{
+ struct device *dev = &chip->client->dev;
+ struct chip_data *data = &max17040_family[
+ (uintptr_t) of_device_get_match_data(dev)];
+ int rcomp_len;
+ u8 rcomp[2];
+
+ chip->quirk_double_soc = device_property_read_bool(dev,
+ "maxim,double-soc");
+
+ chip->low_soc_alert = MAX17040_ATHD_DEFAULT_POWER_UP;
+ device_property_read_u32(dev,
+ "maxim,alert-low-soc-level",
+ &chip->low_soc_alert);
+
+ if (chip->low_soc_alert <= 0 ||
+ chip->low_soc_alert > (chip->quirk_double_soc ? 16 : 32)) {
+ dev_err(dev, "maxim,alert-low-soc-level out of bounds\n");
+ return -EINVAL;
+ }
+
+ rcomp_len = device_property_count_u8(dev, "maxim,rcomp");
+ chip->rcomp = MAX17040_RCOMP_DEFAULT;
+ if (rcomp_len == data->rcomp_bytes) {
+ device_property_read_u8_array(dev, "maxim,rcomp",
+ rcomp, rcomp_len);
+ chip->rcomp = rcomp_len == 2 ?
+ rcomp[0] << 8 | rcomp[1] :
+ rcomp[0] << 8;
+ } else if (rcomp_len > 0) {
+ dev_err(dev, "maxim,rcomp has incorrect length\n");
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static void max17040_check_changes(struct max17040_chip *chip)
+{
+ chip->soc = max17040_get_soc(chip);
+ chip->status = max17040_get_status(chip);
+}
+
+static void max17040_queue_work(struct max17040_chip *chip)
+{
+ queue_delayed_work(system_power_efficient_wq, &chip->work,
+ MAX17040_DELAY);
+}
+
+static void max17040_stop_work(void *data)
+{
+ struct max17040_chip *chip = data;
+
+ cancel_delayed_work_sync(&chip->work);
+}
+
+static void max17040_work(struct work_struct *work)
+{
+ struct max17040_chip *chip;
+ int last_soc, last_status;
+
+ chip = container_of(work, struct max17040_chip, work.work);
+
+ /* store SOC and status to check changes */
+ last_soc = chip->soc;
+ last_status = chip->status;
+ max17040_check_changes(chip);
+
+ /* check changes and send uevent */
+ if (last_soc != chip->soc || last_status != chip->status)
+ power_supply_changed(chip->battery);
+
+ max17040_queue_work(chip);
+}
+
+/* Returns true if alert cause was SOC change, not low SOC */
+static bool max17040_handle_soc_alert(struct max17040_chip *chip)
+{
+ bool ret = true;
+ u32 data;
+
+ regmap_read(chip->regmap, MAX17040_STATUS, &data);
+
+ if (data & MAX17040_STATUS_HD_MASK) {
+ // this alert was caused by low soc
+ ret = false;
+ }
+ if (data & MAX17040_STATUS_SC_MASK) {
+ // soc change bit -- deassert to mark as handled
+ regmap_write(chip->regmap, MAX17040_STATUS,
+ data & ~MAX17040_STATUS_SC_MASK);
+ }
+
+ return ret;
+}
+
+static irqreturn_t max17040_thread_handler(int id, void *dev)
+{
+ struct max17040_chip *chip = dev;
+
+ if (!(chip->data.has_soc_alert && max17040_handle_soc_alert(chip)))
+ dev_warn(&chip->client->dev, "IRQ: Alert battery low level\n");
+
+ /* read registers */
+ max17040_check_changes(chip);
+
+ /* send uevent */
+ power_supply_changed(chip->battery);
+
+ /* reset alert bit */
+ max17040_set_low_soc_alert(chip, chip->low_soc_alert);
+
+ return IRQ_HANDLED;
+}
+
+static int max17040_enable_alert_irq(struct max17040_chip *chip)
+{
+ struct i2c_client *client = chip->client;
+ unsigned int flags;
+ int ret;
+
+ flags = IRQF_TRIGGER_FALLING | IRQF_ONESHOT;
+ ret = devm_request_threaded_irq(&client->dev, client->irq, NULL,
+ max17040_thread_handler, flags,
+ chip->battery->desc->name, chip);
+
+ return ret;
+}
+
+static int max17040_prop_writeable(struct power_supply *psy,
+ enum power_supply_property psp)
+{
+ switch (psp) {
+ case POWER_SUPPLY_PROP_CAPACITY_ALERT_MIN:
+ return 1;
+ default:
+ return 0;
+ }
+}
+
+static int max17040_set_property(struct power_supply *psy,
+ enum power_supply_property psp,
+ const union power_supply_propval *val)
+{
+ struct max17040_chip *chip = power_supply_get_drvdata(psy);
+ int ret;
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_CAPACITY_ALERT_MIN:
+ /* alert threshold can be programmed from 1% up to 16/32% */
+ if ((val->intval < 1) ||
+ (val->intval > (chip->quirk_double_soc ? 16 : 32))) {
+ ret = -EINVAL;
+ break;
+ }
+ ret = max17040_set_low_soc_alert(chip, val->intval);
+ chip->low_soc_alert = val->intval;
+ break;
+ default:
+ ret = -EINVAL;
+ }
+
+ return ret;
+}
+
+static int max17040_get_property(struct power_supply *psy,
+ enum power_supply_property psp,
+ union power_supply_propval *val)
+{
+ struct max17040_chip *chip = power_supply_get_drvdata(psy);
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_STATUS:
+ val->intval = max17040_get_status(chip);
+ break;
+ case POWER_SUPPLY_PROP_ONLINE:
+ val->intval = max17040_get_online(chip);
+ break;
+ case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+ val->intval = max17040_get_vcell(chip);
+ break;
+ case POWER_SUPPLY_PROP_CAPACITY:
+ val->intval = max17040_get_soc(chip);
+ break;
+ case POWER_SUPPLY_PROP_CAPACITY_ALERT_MIN:
+ val->intval = chip->low_soc_alert;
+ break;
+ default:
+ return -EINVAL;
+ }
+ return 0;
+}
+
+static const struct regmap_config max17040_regmap = {
+ .reg_bits = 8,
+ .reg_stride = 2,
+ .val_bits = 16,
+ .val_format_endian = REGMAP_ENDIAN_BIG,
+};
+
+static enum power_supply_property max17040_battery_props[] = {
+ POWER_SUPPLY_PROP_STATUS,
+ POWER_SUPPLY_PROP_ONLINE,
+ POWER_SUPPLY_PROP_VOLTAGE_NOW,
+ POWER_SUPPLY_PROP_CAPACITY,
+ POWER_SUPPLY_PROP_CAPACITY_ALERT_MIN,
+};
+
+static const struct power_supply_desc max17040_battery_desc = {
+ .name = "battery",
+ .type = POWER_SUPPLY_TYPE_BATTERY,
+ .get_property = max17040_get_property,
+ .set_property = max17040_set_property,
+ .property_is_writeable = max17040_prop_writeable,
+ .properties = max17040_battery_props,
+ .num_properties = ARRAY_SIZE(max17040_battery_props),
+};
+
+static int max17040_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct i2c_adapter *adapter = client->adapter;
+ struct power_supply_config psy_cfg = {};
+ struct max17040_chip *chip;
+ enum chip_id chip_id;
+ bool enable_irq = false;
+ int ret;
+
+ if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE))
+ return -EIO;
+
+ chip = devm_kzalloc(&client->dev, sizeof(*chip), GFP_KERNEL);
+ if (!chip)
+ return -ENOMEM;
+
+ chip->client = client;
+ chip->regmap = devm_regmap_init_i2c(client, &max17040_regmap);
+ chip->pdata = client->dev.platform_data;
+ if (IS_ERR(chip->regmap))
+ return PTR_ERR(chip->regmap);
+ chip_id = (enum chip_id) id->driver_data;
+ if (client->dev.of_node) {
+ ret = max17040_get_of_data(chip);
+ if (ret)
+ return ret;
+ chip_id = (enum chip_id) (uintptr_t)
+ of_device_get_match_data(&client->dev);
+ }
+ chip->data = max17040_family[chip_id];
+
+ i2c_set_clientdata(client, chip);
+ psy_cfg.drv_data = chip;
+
+ chip->battery = devm_power_supply_register(&client->dev,
+ &max17040_battery_desc, &psy_cfg);
+ if (IS_ERR(chip->battery)) {
+ dev_err(&client->dev, "failed: power supply register\n");
+ return PTR_ERR(chip->battery);
+ }
+
+ ret = max17040_get_version(chip);
+ if (ret < 0)
+ return ret;
+ dev_dbg(&chip->client->dev, "MAX17040 Fuel-Gauge Ver 0x%x\n", ret);
+
+ if (chip_id == ID_MAX17040 || chip_id == ID_MAX17041)
+ max17040_reset(chip);
+
+ max17040_set_rcomp(chip, chip->rcomp);
+
+ /* check interrupt */
+ if (client->irq && chip->data.has_low_soc_alert) {
+ ret = max17040_set_low_soc_alert(chip, chip->low_soc_alert);
+ if (ret) {
+ dev_err(&client->dev,
+ "Failed to set low SOC alert: err %d\n", ret);
+ return ret;
+ }
+
+ enable_irq = true;
+ }
+
+ if (client->irq && chip->data.has_soc_alert) {
+ ret = max17040_set_soc_alert(chip, 1);
+ if (ret) {
+ dev_err(&client->dev,
+ "Failed to set SOC alert: err %d\n", ret);
+ return ret;
+ }
+ enable_irq = true;
+ } else {
+ /* soc alerts negate the need for polling */
+ INIT_DEFERRABLE_WORK(&chip->work, max17040_work);
+ ret = devm_add_action(&client->dev, max17040_stop_work, chip);
+ if (ret)
+ return ret;
+ max17040_queue_work(chip);
+ }
+
+ if (enable_irq) {
+ ret = max17040_enable_alert_irq(chip);
+ if (ret) {
+ client->irq = 0;
+ dev_warn(&client->dev,
+ "Failed to get IRQ err %d\n", ret);
+ }
+ }
+
+ return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+
+static int max17040_suspend(struct device *dev)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct max17040_chip *chip = i2c_get_clientdata(client);
+
+ if (client->irq && chip->data.has_soc_alert)
+ // disable soc alert to prevent wakeup
+ max17040_set_soc_alert(chip, 0);
+ else
+ cancel_delayed_work(&chip->work);
+
+ if (client->irq && device_may_wakeup(dev))
+ enable_irq_wake(client->irq);
+
+ return 0;
+}
+
+static int max17040_resume(struct device *dev)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct max17040_chip *chip = i2c_get_clientdata(client);
+
+ if (client->irq && device_may_wakeup(dev))
+ disable_irq_wake(client->irq);
+
+ if (client->irq && chip->data.has_soc_alert)
+ max17040_set_soc_alert(chip, 1);
+ else
+ max17040_queue_work(chip);
+
+ return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(max17040_pm_ops, max17040_suspend, max17040_resume);
+#define MAX17040_PM_OPS (&max17040_pm_ops)
+
+#else
+
+#define MAX17040_PM_OPS NULL
+
+#endif /* CONFIG_PM_SLEEP */
+
+static const struct i2c_device_id max17040_id[] = {
+ { "max17040", ID_MAX17040 },
+ { "max17041", ID_MAX17041 },
+ { "max17043", ID_MAX17043 },
+ { "max77836-battery", ID_MAX17043 },
+ { "max17044", ID_MAX17044 },
+ { "max17048", ID_MAX17048 },
+ { "max17049", ID_MAX17049 },
+ { "max17058", ID_MAX17058 },
+ { "max17059", ID_MAX17059 },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(i2c, max17040_id);
+
+static const struct of_device_id max17040_of_match[] = {
+ { .compatible = "maxim,max17040", .data = (void *) ID_MAX17040 },
+ { .compatible = "maxim,max17041", .data = (void *) ID_MAX17041 },
+ { .compatible = "maxim,max17043", .data = (void *) ID_MAX17043 },
+ { .compatible = "maxim,max77836-battery", .data = (void *) ID_MAX17043 },
+ { .compatible = "maxim,max17044", .data = (void *) ID_MAX17044 },
+ { .compatible = "maxim,max17048", .data = (void *) ID_MAX17048 },
+ { .compatible = "maxim,max17049", .data = (void *) ID_MAX17049 },
+ { .compatible = "maxim,max17058", .data = (void *) ID_MAX17058 },
+ { .compatible = "maxim,max17059", .data = (void *) ID_MAX17059 },
+ { /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, max17040_of_match);
+
+static struct i2c_driver max17040_i2c_driver = {
+ .driver = {
+ .name = "max17040",
+ .of_match_table = max17040_of_match,
+ .pm = MAX17040_PM_OPS,
+ },
+ .probe = max17040_probe,
+ .id_table = max17040_id,
+};
+module_i2c_driver(max17040_i2c_driver);
+
+MODULE_AUTHOR("Minkyu Kang <mk7.kang@samsung.com>");
+MODULE_DESCRIPTION("MAX17040 Fuel Gauge");
+MODULE_LICENSE("GPL");
diff --git a/drivers/power/supply/max17042_battery.c b/drivers/power/supply/max17042_battery.c
new file mode 100644
index 000000000..76b0f45a2
--- /dev/null
+++ b/drivers/power/supply/max17042_battery.c
@@ -0,0 +1,1229 @@
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Fuel gauge driver for Maxim 17042 / 8966 / 8997
+// Note that Maxim 8966 and 8997 are mfd and this is its subdevice.
+//
+// Copyright (C) 2011 Samsung Electronics
+// MyungJoo Ham <myungjoo.ham@samsung.com>
+//
+// This driver is based on max17040_battery.c
+
+#include <linux/acpi.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/pm.h>
+#include <linux/mod_devicetable.h>
+#include <linux/power_supply.h>
+#include <linux/power/max17042_battery.h>
+#include <linux/of.h>
+#include <linux/regmap.h>
+
+/* Status register bits */
+#define STATUS_POR_BIT (1 << 1)
+#define STATUS_BST_BIT (1 << 3)
+#define STATUS_VMN_BIT (1 << 8)
+#define STATUS_TMN_BIT (1 << 9)
+#define STATUS_SMN_BIT (1 << 10)
+#define STATUS_BI_BIT (1 << 11)
+#define STATUS_VMX_BIT (1 << 12)
+#define STATUS_TMX_BIT (1 << 13)
+#define STATUS_SMX_BIT (1 << 14)
+#define STATUS_BR_BIT (1 << 15)
+
+/* Interrupt mask bits */
+#define CONFIG_ALRT_BIT_ENBL (1 << 2)
+#define STATUS_INTR_SOCMIN_BIT (1 << 10)
+#define STATUS_INTR_SOCMAX_BIT (1 << 14)
+
+#define VFSOC0_LOCK 0x0000
+#define VFSOC0_UNLOCK 0x0080
+#define MODEL_UNLOCK1 0X0059
+#define MODEL_UNLOCK2 0X00C4
+#define MODEL_LOCK1 0X0000
+#define MODEL_LOCK2 0X0000
+
+#define dQ_ACC_DIV 0x4
+#define dP_ACC_100 0x1900
+#define dP_ACC_200 0x3200
+
+#define MAX17042_VMAX_TOLERANCE 50 /* 50 mV */
+
+struct max17042_chip {
+ struct i2c_client *client;
+ struct regmap *regmap;
+ struct power_supply *battery;
+ enum max170xx_chip_type chip_type;
+ struct max17042_platform_data *pdata;
+ struct work_struct work;
+ int init_complete;
+};
+
+static enum power_supply_property max17042_battery_props[] = {
+ POWER_SUPPLY_PROP_STATUS,
+ POWER_SUPPLY_PROP_PRESENT,
+ POWER_SUPPLY_PROP_TECHNOLOGY,
+ POWER_SUPPLY_PROP_CYCLE_COUNT,
+ POWER_SUPPLY_PROP_VOLTAGE_MAX,
+ POWER_SUPPLY_PROP_VOLTAGE_MIN,
+ POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN,
+ POWER_SUPPLY_PROP_VOLTAGE_NOW,
+ POWER_SUPPLY_PROP_VOLTAGE_AVG,
+ POWER_SUPPLY_PROP_VOLTAGE_OCV,
+ POWER_SUPPLY_PROP_CAPACITY,
+ POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN,
+ POWER_SUPPLY_PROP_CHARGE_FULL,
+ POWER_SUPPLY_PROP_CHARGE_NOW,
+ POWER_SUPPLY_PROP_CHARGE_COUNTER,
+ POWER_SUPPLY_PROP_TEMP,
+ POWER_SUPPLY_PROP_TEMP_ALERT_MIN,
+ POWER_SUPPLY_PROP_TEMP_ALERT_MAX,
+ POWER_SUPPLY_PROP_TEMP_MIN,
+ POWER_SUPPLY_PROP_TEMP_MAX,
+ POWER_SUPPLY_PROP_HEALTH,
+ POWER_SUPPLY_PROP_SCOPE,
+ POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW,
+ // these two have to be at the end on the list
+ POWER_SUPPLY_PROP_CURRENT_NOW,
+ POWER_SUPPLY_PROP_CURRENT_AVG,
+};
+
+static int max17042_get_temperature(struct max17042_chip *chip, int *temp)
+{
+ int ret;
+ u32 data;
+ struct regmap *map = chip->regmap;
+
+ ret = regmap_read(map, MAX17042_TEMP, &data);
+ if (ret < 0)
+ return ret;
+
+ *temp = sign_extend32(data, 15);
+ /* The value is converted into deci-centigrade scale */
+ /* Units of LSB = 1 / 256 degree Celsius */
+ *temp = *temp * 10 / 256;
+ return 0;
+}
+
+static int max17042_get_status(struct max17042_chip *chip, int *status)
+{
+ int ret, charge_full, charge_now;
+ int avg_current;
+ u32 data;
+
+ ret = power_supply_am_i_supplied(chip->battery);
+ if (ret < 0) {
+ *status = POWER_SUPPLY_STATUS_UNKNOWN;
+ return 0;
+ }
+ if (ret == 0) {
+ *status = POWER_SUPPLY_STATUS_DISCHARGING;
+ return 0;
+ }
+
+ /*
+ * The MAX170xx has builtin end-of-charge detection and will update
+ * FullCAP to match RepCap when it detects end of charging.
+ *
+ * When this cycle the battery gets charged to a higher (calculated)
+ * capacity then the previous cycle then FullCAP will get updated
+ * contineously once end-of-charge detection kicks in, so allow the
+ * 2 to differ a bit.
+ */
+
+ ret = regmap_read(chip->regmap, MAX17042_FullCAP, &charge_full);
+ if (ret < 0)
+ return ret;
+
+ ret = regmap_read(chip->regmap, MAX17042_RepCap, &charge_now);
+ if (ret < 0)
+ return ret;
+
+ if ((charge_full - charge_now) <= MAX17042_FULL_THRESHOLD) {
+ *status = POWER_SUPPLY_STATUS_FULL;
+ return 0;
+ }
+
+ /*
+ * Even though we are supplied, we may still be discharging if the
+ * supply is e.g. only delivering 5V 0.5A. Check current if available.
+ */
+ if (!chip->pdata->enable_current_sense) {
+ *status = POWER_SUPPLY_STATUS_CHARGING;
+ return 0;
+ }
+
+ ret = regmap_read(chip->regmap, MAX17042_AvgCurrent, &data);
+ if (ret < 0)
+ return ret;
+
+ avg_current = sign_extend32(data, 15);
+ avg_current *= 1562500 / chip->pdata->r_sns;
+
+ if (avg_current > 0)
+ *status = POWER_SUPPLY_STATUS_CHARGING;
+ else
+ *status = POWER_SUPPLY_STATUS_DISCHARGING;
+
+ return 0;
+}
+
+static int max17042_get_battery_health(struct max17042_chip *chip, int *health)
+{
+ int temp, vavg, vbatt, ret;
+ u32 val;
+
+ ret = regmap_read(chip->regmap, MAX17042_AvgVCELL, &val);
+ if (ret < 0)
+ goto health_error;
+
+ /* bits [0-3] unused */
+ vavg = val * 625 / 8;
+ /* Convert to millivolts */
+ vavg /= 1000;
+
+ ret = regmap_read(chip->regmap, MAX17042_VCELL, &val);
+ if (ret < 0)
+ goto health_error;
+
+ /* bits [0-3] unused */
+ vbatt = val * 625 / 8;
+ /* Convert to millivolts */
+ vbatt /= 1000;
+
+ if (vavg < chip->pdata->vmin) {
+ *health = POWER_SUPPLY_HEALTH_DEAD;
+ goto out;
+ }
+
+ if (vbatt > chip->pdata->vmax + MAX17042_VMAX_TOLERANCE) {
+ *health = POWER_SUPPLY_HEALTH_OVERVOLTAGE;
+ goto out;
+ }
+
+ ret = max17042_get_temperature(chip, &temp);
+ if (ret < 0)
+ goto health_error;
+
+ if (temp < chip->pdata->temp_min) {
+ *health = POWER_SUPPLY_HEALTH_COLD;
+ goto out;
+ }
+
+ if (temp > chip->pdata->temp_max) {
+ *health = POWER_SUPPLY_HEALTH_OVERHEAT;
+ goto out;
+ }
+
+ *health = POWER_SUPPLY_HEALTH_GOOD;
+
+out:
+ return 0;
+
+health_error:
+ return ret;
+}
+
+static int max17042_get_property(struct power_supply *psy,
+ enum power_supply_property psp,
+ union power_supply_propval *val)
+{
+ struct max17042_chip *chip = power_supply_get_drvdata(psy);
+ struct regmap *map = chip->regmap;
+ int ret;
+ u32 data;
+ u64 data64;
+
+ if (!chip->init_complete)
+ return -EAGAIN;
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_STATUS:
+ ret = max17042_get_status(chip, &val->intval);
+ if (ret < 0)
+ return ret;
+ break;
+ case POWER_SUPPLY_PROP_PRESENT:
+ ret = regmap_read(map, MAX17042_STATUS, &data);
+ if (ret < 0)
+ return ret;
+
+ if (data & MAX17042_STATUS_BattAbsent)
+ val->intval = 0;
+ else
+ val->intval = 1;
+ break;
+ case POWER_SUPPLY_PROP_TECHNOLOGY:
+ val->intval = POWER_SUPPLY_TECHNOLOGY_LION;
+ break;
+ case POWER_SUPPLY_PROP_CYCLE_COUNT:
+ ret = regmap_read(map, MAX17042_Cycles, &data);
+ if (ret < 0)
+ return ret;
+
+ val->intval = data;
+ break;
+ case POWER_SUPPLY_PROP_VOLTAGE_MAX:
+ ret = regmap_read(map, MAX17042_MinMaxVolt, &data);
+ if (ret < 0)
+ return ret;
+
+ val->intval = data >> 8;
+ val->intval *= 20000; /* Units of LSB = 20mV */
+ break;
+ case POWER_SUPPLY_PROP_VOLTAGE_MIN:
+ ret = regmap_read(map, MAX17042_MinMaxVolt, &data);
+ if (ret < 0)
+ return ret;
+
+ val->intval = (data & 0xff) * 20000; /* Units of 20mV */
+ break;
+ case POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN:
+ if (chip->chip_type == MAXIM_DEVICE_TYPE_MAX17042)
+ ret = regmap_read(map, MAX17042_V_empty, &data);
+ else if (chip->chip_type == MAXIM_DEVICE_TYPE_MAX17055)
+ ret = regmap_read(map, MAX17055_V_empty, &data);
+ else
+ ret = regmap_read(map, MAX17047_V_empty, &data);
+ if (ret < 0)
+ return ret;
+
+ val->intval = data >> 7;
+ val->intval *= 10000; /* Units of LSB = 10mV */
+ break;
+ case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+ ret = regmap_read(map, MAX17042_VCELL, &data);
+ if (ret < 0)
+ return ret;
+
+ val->intval = data * 625 / 8;
+ break;
+ case POWER_SUPPLY_PROP_VOLTAGE_AVG:
+ ret = regmap_read(map, MAX17042_AvgVCELL, &data);
+ if (ret < 0)
+ return ret;
+
+ val->intval = data * 625 / 8;
+ break;
+ case POWER_SUPPLY_PROP_VOLTAGE_OCV:
+ ret = regmap_read(map, MAX17042_OCVInternal, &data);
+ if (ret < 0)
+ return ret;
+
+ val->intval = data * 625 / 8;
+ break;
+ case POWER_SUPPLY_PROP_CAPACITY:
+ if (chip->pdata->enable_current_sense)
+ ret = regmap_read(map, MAX17042_RepSOC, &data);
+ else
+ ret = regmap_read(map, MAX17042_VFSOC, &data);
+ if (ret < 0)
+ return ret;
+
+ val->intval = data >> 8;
+ break;
+ case POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN:
+ ret = regmap_read(map, MAX17042_DesignCap, &data);
+ if (ret < 0)
+ return ret;
+
+ data64 = data * 5000000ll;
+ do_div(data64, chip->pdata->r_sns);
+ val->intval = data64;
+ break;
+ case POWER_SUPPLY_PROP_CHARGE_FULL:
+ ret = regmap_read(map, MAX17042_FullCAP, &data);
+ if (ret < 0)
+ return ret;
+
+ data64 = data * 5000000ll;
+ do_div(data64, chip->pdata->r_sns);
+ val->intval = data64;
+ break;
+ case POWER_SUPPLY_PROP_CHARGE_NOW:
+ ret = regmap_read(map, MAX17042_RepCap, &data);
+ if (ret < 0)
+ return ret;
+
+ data64 = data * 5000000ll;
+ do_div(data64, chip->pdata->r_sns);
+ val->intval = data64;
+ break;
+ case POWER_SUPPLY_PROP_CHARGE_COUNTER:
+ ret = regmap_read(map, MAX17042_QH, &data);
+ if (ret < 0)
+ return ret;
+
+ val->intval = data * 1000 / 2;
+ break;
+ case POWER_SUPPLY_PROP_TEMP:
+ ret = max17042_get_temperature(chip, &val->intval);
+ if (ret < 0)
+ return ret;
+ break;
+ case POWER_SUPPLY_PROP_TEMP_ALERT_MIN:
+ ret = regmap_read(map, MAX17042_TALRT_Th, &data);
+ if (ret < 0)
+ return ret;
+ /* LSB is Alert Minimum. In deci-centigrade */
+ val->intval = sign_extend32(data & 0xff, 7) * 10;
+ break;
+ case POWER_SUPPLY_PROP_TEMP_ALERT_MAX:
+ ret = regmap_read(map, MAX17042_TALRT_Th, &data);
+ if (ret < 0)
+ return ret;
+ /* MSB is Alert Maximum. In deci-centigrade */
+ val->intval = sign_extend32(data >> 8, 7) * 10;
+ break;
+ case POWER_SUPPLY_PROP_TEMP_MIN:
+ val->intval = chip->pdata->temp_min;
+ break;
+ case POWER_SUPPLY_PROP_TEMP_MAX:
+ val->intval = chip->pdata->temp_max;
+ break;
+ case POWER_SUPPLY_PROP_HEALTH:
+ ret = max17042_get_battery_health(chip, &val->intval);
+ if (ret < 0)
+ return ret;
+ break;
+ case POWER_SUPPLY_PROP_SCOPE:
+ val->intval = POWER_SUPPLY_SCOPE_SYSTEM;
+ break;
+ case POWER_SUPPLY_PROP_CURRENT_NOW:
+ if (chip->pdata->enable_current_sense) {
+ ret = regmap_read(map, MAX17042_Current, &data);
+ if (ret < 0)
+ return ret;
+
+ val->intval = sign_extend32(data, 15);
+ val->intval *= 1562500 / chip->pdata->r_sns;
+ } else {
+ return -EINVAL;
+ }
+ break;
+ case POWER_SUPPLY_PROP_CURRENT_AVG:
+ if (chip->pdata->enable_current_sense) {
+ ret = regmap_read(map, MAX17042_AvgCurrent, &data);
+ if (ret < 0)
+ return ret;
+
+ val->intval = sign_extend32(data, 15);
+ val->intval *= 1562500 / chip->pdata->r_sns;
+ } else {
+ return -EINVAL;
+ }
+ break;
+ case POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW:
+ ret = regmap_read(map, MAX17042_TTE, &data);
+ if (ret < 0)
+ return ret;
+
+ val->intval = data * 5625 / 1000;
+ break;
+ default:
+ return -EINVAL;
+ }
+ return 0;
+}
+
+static int max17042_set_property(struct power_supply *psy,
+ enum power_supply_property psp,
+ const union power_supply_propval *val)
+{
+ struct max17042_chip *chip = power_supply_get_drvdata(psy);
+ struct regmap *map = chip->regmap;
+ int ret = 0;
+ u32 data;
+ int8_t temp;
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_TEMP_ALERT_MIN:
+ ret = regmap_read(map, MAX17042_TALRT_Th, &data);
+ if (ret < 0)
+ return ret;
+
+ /* Input in deci-centigrade, convert to centigrade */
+ temp = val->intval / 10;
+ /* force min < max */
+ if (temp >= (int8_t)(data >> 8))
+ temp = (int8_t)(data >> 8) - 1;
+ /* Write both MAX and MIN ALERT */
+ data = (data & 0xff00) + temp;
+ ret = regmap_write(map, MAX17042_TALRT_Th, data);
+ break;
+ case POWER_SUPPLY_PROP_TEMP_ALERT_MAX:
+ ret = regmap_read(map, MAX17042_TALRT_Th, &data);
+ if (ret < 0)
+ return ret;
+
+ /* Input in Deci-Centigrade, convert to centigrade */
+ temp = val->intval / 10;
+ /* force max > min */
+ if (temp <= (int8_t)(data & 0xff))
+ temp = (int8_t)(data & 0xff) + 1;
+ /* Write both MAX and MIN ALERT */
+ data = (data & 0xff) + (temp << 8);
+ ret = regmap_write(map, MAX17042_TALRT_Th, data);
+ break;
+ default:
+ ret = -EINVAL;
+ }
+
+ return ret;
+}
+
+static int max17042_property_is_writeable(struct power_supply *psy,
+ enum power_supply_property psp)
+{
+ int ret;
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_TEMP_ALERT_MIN:
+ case POWER_SUPPLY_PROP_TEMP_ALERT_MAX:
+ ret = 1;
+ break;
+ default:
+ ret = 0;
+ }
+
+ return ret;
+}
+
+static void max17042_external_power_changed(struct power_supply *psy)
+{
+ power_supply_changed(psy);
+}
+
+static int max17042_write_verify_reg(struct regmap *map, u8 reg, u32 value)
+{
+ int retries = 8;
+ int ret;
+ u32 read_value;
+
+ do {
+ ret = regmap_write(map, reg, value);
+ regmap_read(map, reg, &read_value);
+ if (read_value != value) {
+ ret = -EIO;
+ retries--;
+ }
+ } while (retries && read_value != value);
+
+ if (ret < 0)
+ pr_err("%s: err %d\n", __func__, ret);
+
+ return ret;
+}
+
+static inline void max17042_override_por(struct regmap *map,
+ u8 reg, u16 value)
+{
+ if (value)
+ regmap_write(map, reg, value);
+}
+
+static inline void max17042_unlock_model(struct max17042_chip *chip)
+{
+ struct regmap *map = chip->regmap;
+
+ regmap_write(map, MAX17042_MLOCKReg1, MODEL_UNLOCK1);
+ regmap_write(map, MAX17042_MLOCKReg2, MODEL_UNLOCK2);
+}
+
+static inline void max17042_lock_model(struct max17042_chip *chip)
+{
+ struct regmap *map = chip->regmap;
+
+ regmap_write(map, MAX17042_MLOCKReg1, MODEL_LOCK1);
+ regmap_write(map, MAX17042_MLOCKReg2, MODEL_LOCK2);
+}
+
+static inline void max17042_write_model_data(struct max17042_chip *chip,
+ u8 addr, int size)
+{
+ struct regmap *map = chip->regmap;
+ int i;
+
+ for (i = 0; i < size; i++)
+ regmap_write(map, addr + i,
+ chip->pdata->config_data->cell_char_tbl[i]);
+}
+
+static inline void max17042_read_model_data(struct max17042_chip *chip,
+ u8 addr, u16 *data, int size)
+{
+ struct regmap *map = chip->regmap;
+ int i;
+ u32 tmp;
+
+ for (i = 0; i < size; i++) {
+ regmap_read(map, addr + i, &tmp);
+ data[i] = (u16)tmp;
+ }
+}
+
+static inline int max17042_model_data_compare(struct max17042_chip *chip,
+ u16 *data1, u16 *data2, int size)
+{
+ int i;
+
+ if (memcmp(data1, data2, size)) {
+ dev_err(&chip->client->dev, "%s compare failed\n", __func__);
+ for (i = 0; i < size; i++)
+ dev_info(&chip->client->dev, "0x%x, 0x%x",
+ data1[i], data2[i]);
+ dev_info(&chip->client->dev, "\n");
+ return -EINVAL;
+ }
+ return 0;
+}
+
+static int max17042_init_model(struct max17042_chip *chip)
+{
+ int ret;
+ int table_size = ARRAY_SIZE(chip->pdata->config_data->cell_char_tbl);
+ u16 *temp_data;
+
+ temp_data = kcalloc(table_size, sizeof(*temp_data), GFP_KERNEL);
+ if (!temp_data)
+ return -ENOMEM;
+
+ max17042_unlock_model(chip);
+ max17042_write_model_data(chip, MAX17042_MODELChrTbl,
+ table_size);
+ max17042_read_model_data(chip, MAX17042_MODELChrTbl, temp_data,
+ table_size);
+
+ ret = max17042_model_data_compare(
+ chip,
+ chip->pdata->config_data->cell_char_tbl,
+ temp_data,
+ table_size);
+
+ max17042_lock_model(chip);
+ kfree(temp_data);
+
+ return ret;
+}
+
+static int max17042_verify_model_lock(struct max17042_chip *chip)
+{
+ int i;
+ int table_size = ARRAY_SIZE(chip->pdata->config_data->cell_char_tbl);
+ u16 *temp_data;
+ int ret = 0;
+
+ temp_data = kcalloc(table_size, sizeof(*temp_data), GFP_KERNEL);
+ if (!temp_data)
+ return -ENOMEM;
+
+ max17042_read_model_data(chip, MAX17042_MODELChrTbl, temp_data,
+ table_size);
+ for (i = 0; i < table_size; i++)
+ if (temp_data[i])
+ ret = -EINVAL;
+
+ kfree(temp_data);
+ return ret;
+}
+
+static void max17042_write_config_regs(struct max17042_chip *chip)
+{
+ struct max17042_config_data *config = chip->pdata->config_data;
+ struct regmap *map = chip->regmap;
+
+ regmap_write(map, MAX17042_CONFIG, config->config);
+ regmap_write(map, MAX17042_LearnCFG, config->learn_cfg);
+ regmap_write(map, MAX17042_FilterCFG,
+ config->filter_cfg);
+ regmap_write(map, MAX17042_RelaxCFG, config->relax_cfg);
+ if (chip->chip_type == MAXIM_DEVICE_TYPE_MAX17047 ||
+ chip->chip_type == MAXIM_DEVICE_TYPE_MAX17050 ||
+ chip->chip_type == MAXIM_DEVICE_TYPE_MAX17055)
+ regmap_write(map, MAX17047_FullSOCThr,
+ config->full_soc_thresh);
+}
+
+static void max17042_write_custom_regs(struct max17042_chip *chip)
+{
+ struct max17042_config_data *config = chip->pdata->config_data;
+ struct regmap *map = chip->regmap;
+
+ max17042_write_verify_reg(map, MAX17042_RCOMP0, config->rcomp0);
+ max17042_write_verify_reg(map, MAX17042_TempCo, config->tcompc0);
+ max17042_write_verify_reg(map, MAX17042_ICHGTerm, config->ichgt_term);
+ if (chip->chip_type == MAXIM_DEVICE_TYPE_MAX17042) {
+ regmap_write(map, MAX17042_EmptyTempCo, config->empty_tempco);
+ max17042_write_verify_reg(map, MAX17042_K_empty0,
+ config->kempty0);
+ } else {
+ max17042_write_verify_reg(map, MAX17047_QRTbl00,
+ config->qrtbl00);
+ max17042_write_verify_reg(map, MAX17047_QRTbl10,
+ config->qrtbl10);
+ max17042_write_verify_reg(map, MAX17047_QRTbl20,
+ config->qrtbl20);
+ max17042_write_verify_reg(map, MAX17047_QRTbl30,
+ config->qrtbl30);
+ }
+}
+
+static void max17042_update_capacity_regs(struct max17042_chip *chip)
+{
+ struct max17042_config_data *config = chip->pdata->config_data;
+ struct regmap *map = chip->regmap;
+
+ max17042_write_verify_reg(map, MAX17042_FullCAP,
+ config->fullcap);
+ regmap_write(map, MAX17042_DesignCap, config->design_cap);
+ max17042_write_verify_reg(map, MAX17042_FullCAPNom,
+ config->fullcapnom);
+}
+
+static void max17042_reset_vfsoc0_reg(struct max17042_chip *chip)
+{
+ unsigned int vfSoc;
+ struct regmap *map = chip->regmap;
+
+ regmap_read(map, MAX17042_VFSOC, &vfSoc);
+ regmap_write(map, MAX17042_VFSOC0Enable, VFSOC0_UNLOCK);
+ max17042_write_verify_reg(map, MAX17042_VFSOC0, vfSoc);
+ regmap_write(map, MAX17042_VFSOC0Enable, VFSOC0_LOCK);
+}
+
+static void max17042_load_new_capacity_params(struct max17042_chip *chip)
+{
+ u32 full_cap0, rep_cap, dq_acc, vfSoc;
+ u32 rem_cap;
+
+ struct max17042_config_data *config = chip->pdata->config_data;
+ struct regmap *map = chip->regmap;
+
+ regmap_read(map, MAX17042_FullCAP0, &full_cap0);
+ regmap_read(map, MAX17042_VFSOC, &vfSoc);
+
+ /* fg_vfSoc needs to shifted by 8 bits to get the
+ * perc in 1% accuracy, to get the right rem_cap multiply
+ * full_cap0, fg_vfSoc and devide by 100
+ */
+ rem_cap = ((vfSoc >> 8) * full_cap0) / 100;
+ max17042_write_verify_reg(map, MAX17042_RemCap, rem_cap);
+
+ rep_cap = rem_cap;
+ max17042_write_verify_reg(map, MAX17042_RepCap, rep_cap);
+
+ /* Write dQ_acc to 200% of Capacity and dP_acc to 200% */
+ dq_acc = config->fullcap / dQ_ACC_DIV;
+ max17042_write_verify_reg(map, MAX17042_dQacc, dq_acc);
+ max17042_write_verify_reg(map, MAX17042_dPacc, dP_ACC_200);
+
+ max17042_write_verify_reg(map, MAX17042_FullCAP,
+ config->fullcap);
+ regmap_write(map, MAX17042_DesignCap,
+ config->design_cap);
+ max17042_write_verify_reg(map, MAX17042_FullCAPNom,
+ config->fullcapnom);
+ /* Update SOC register with new SOC */
+ regmap_write(map, MAX17042_RepSOC, vfSoc);
+}
+
+/*
+ * Block write all the override values coming from platform data.
+ * This function MUST be called before the POR initialization proceedure
+ * specified by maxim.
+ */
+static inline void max17042_override_por_values(struct max17042_chip *chip)
+{
+ struct regmap *map = chip->regmap;
+ struct max17042_config_data *config = chip->pdata->config_data;
+
+ max17042_override_por(map, MAX17042_TGAIN, config->tgain);
+ max17042_override_por(map, MAX17042_TOFF, config->toff);
+ max17042_override_por(map, MAX17042_CGAIN, config->cgain);
+ max17042_override_por(map, MAX17042_COFF, config->coff);
+
+ max17042_override_por(map, MAX17042_VALRT_Th, config->valrt_thresh);
+ max17042_override_por(map, MAX17042_TALRT_Th, config->talrt_thresh);
+ max17042_override_por(map, MAX17042_SALRT_Th,
+ config->soc_alrt_thresh);
+ max17042_override_por(map, MAX17042_CONFIG, config->config);
+ max17042_override_por(map, MAX17042_SHDNTIMER, config->shdntimer);
+
+ max17042_override_por(map, MAX17042_DesignCap, config->design_cap);
+ max17042_override_por(map, MAX17042_ICHGTerm, config->ichgt_term);
+
+ max17042_override_por(map, MAX17042_AtRate, config->at_rate);
+ max17042_override_por(map, MAX17042_LearnCFG, config->learn_cfg);
+ max17042_override_por(map, MAX17042_FilterCFG, config->filter_cfg);
+ max17042_override_por(map, MAX17042_RelaxCFG, config->relax_cfg);
+ max17042_override_por(map, MAX17042_MiscCFG, config->misc_cfg);
+ max17042_override_por(map, MAX17042_MaskSOC, config->masksoc);
+
+ max17042_override_por(map, MAX17042_FullCAP, config->fullcap);
+ max17042_override_por(map, MAX17042_FullCAPNom, config->fullcapnom);
+ if (chip->chip_type == MAXIM_DEVICE_TYPE_MAX17042)
+ max17042_override_por(map, MAX17042_SOC_empty,
+ config->socempty);
+ max17042_override_por(map, MAX17042_LAvg_empty, config->lavg_empty);
+ max17042_override_por(map, MAX17042_dQacc, config->dqacc);
+ max17042_override_por(map, MAX17042_dPacc, config->dpacc);
+
+ if (chip->chip_type == MAXIM_DEVICE_TYPE_MAX17042)
+ max17042_override_por(map, MAX17042_V_empty, config->vempty);
+ if (chip->chip_type == MAXIM_DEVICE_TYPE_MAX17055)
+ max17042_override_por(map, MAX17055_V_empty, config->vempty);
+ else
+ max17042_override_por(map, MAX17047_V_empty, config->vempty);
+ max17042_override_por(map, MAX17042_TempNom, config->temp_nom);
+ max17042_override_por(map, MAX17042_TempLim, config->temp_lim);
+ max17042_override_por(map, MAX17042_FCTC, config->fctc);
+ max17042_override_por(map, MAX17042_RCOMP0, config->rcomp0);
+ max17042_override_por(map, MAX17042_TempCo, config->tcompc0);
+ if (chip->chip_type &&
+ ((chip->chip_type == MAXIM_DEVICE_TYPE_MAX17042) ||
+ (chip->chip_type == MAXIM_DEVICE_TYPE_MAX17047) ||
+ (chip->chip_type == MAXIM_DEVICE_TYPE_MAX17050))) {
+ max17042_override_por(map, MAX17042_EmptyTempCo,
+ config->empty_tempco);
+ max17042_override_por(map, MAX17042_K_empty0,
+ config->kempty0);
+ }
+}
+
+static int max17042_init_chip(struct max17042_chip *chip)
+{
+ struct regmap *map = chip->regmap;
+ int ret;
+
+ max17042_override_por_values(chip);
+ /* After Power up, the MAX17042 requires 500mS in order
+ * to perform signal debouncing and initial SOC reporting
+ */
+ msleep(500);
+
+ /* Initialize configaration */
+ max17042_write_config_regs(chip);
+
+ /* write cell characterization data */
+ ret = max17042_init_model(chip);
+ if (ret) {
+ dev_err(&chip->client->dev, "%s init failed\n",
+ __func__);
+ return -EIO;
+ }
+
+ ret = max17042_verify_model_lock(chip);
+ if (ret) {
+ dev_err(&chip->client->dev, "%s lock verify failed\n",
+ __func__);
+ return -EIO;
+ }
+ /* write custom parameters */
+ max17042_write_custom_regs(chip);
+
+ /* update capacity params */
+ max17042_update_capacity_regs(chip);
+
+ /* delay must be atleast 350mS to allow VFSOC
+ * to be calculated from the new configuration
+ */
+ msleep(350);
+
+ /* reset vfsoc0 reg */
+ max17042_reset_vfsoc0_reg(chip);
+
+ /* load new capacity params */
+ max17042_load_new_capacity_params(chip);
+
+ /* Init complete, Clear the POR bit */
+ regmap_update_bits(map, MAX17042_STATUS, STATUS_POR_BIT, 0x0);
+ return 0;
+}
+
+static void max17042_set_soc_threshold(struct max17042_chip *chip, u16 off)
+{
+ struct regmap *map = chip->regmap;
+ u32 soc, soc_tr;
+
+ /* program interrupt thesholds such that we should
+ * get interrupt for every 'off' perc change in the soc
+ */
+ regmap_read(map, MAX17042_RepSOC, &soc);
+ soc >>= 8;
+ soc_tr = (soc + off) << 8;
+ if (off < soc)
+ soc_tr |= soc - off;
+ regmap_write(map, MAX17042_SALRT_Th, soc_tr);
+}
+
+static irqreturn_t max17042_thread_handler(int id, void *dev)
+{
+ struct max17042_chip *chip = dev;
+ u32 val;
+ int ret;
+
+ ret = regmap_read(chip->regmap, MAX17042_STATUS, &val);
+ if (ret)
+ return IRQ_HANDLED;
+
+ if ((val & STATUS_INTR_SOCMIN_BIT) ||
+ (val & STATUS_INTR_SOCMAX_BIT)) {
+ dev_info(&chip->client->dev, "SOC threshold INTR\n");
+ max17042_set_soc_threshold(chip, 1);
+ }
+
+ /* we implicitly handle all alerts via power_supply_changed */
+ regmap_clear_bits(chip->regmap, MAX17042_STATUS,
+ 0xFFFF & ~(STATUS_POR_BIT | STATUS_BST_BIT));
+
+ power_supply_changed(chip->battery);
+ return IRQ_HANDLED;
+}
+
+static void max17042_init_worker(struct work_struct *work)
+{
+ struct max17042_chip *chip = container_of(work,
+ struct max17042_chip, work);
+ int ret;
+
+ /* Initialize registers according to values from the platform data */
+ if (chip->pdata->enable_por_init && chip->pdata->config_data) {
+ ret = max17042_init_chip(chip);
+ if (ret)
+ return;
+ }
+
+ chip->init_complete = 1;
+}
+
+#ifdef CONFIG_OF
+static struct max17042_platform_data *
+max17042_get_of_pdata(struct max17042_chip *chip)
+{
+ struct device *dev = &chip->client->dev;
+ struct device_node *np = dev->of_node;
+ u32 prop;
+ struct max17042_platform_data *pdata;
+
+ pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
+ if (!pdata)
+ return NULL;
+
+ /*
+ * Require current sense resistor value to be specified for
+ * current-sense functionality to be enabled at all.
+ */
+ if (of_property_read_u32(np, "maxim,rsns-microohm", &prop) == 0) {
+ pdata->r_sns = prop;
+ pdata->enable_current_sense = true;
+ }
+
+ if (of_property_read_s32(np, "maxim,cold-temp", &pdata->temp_min))
+ pdata->temp_min = INT_MIN;
+ if (of_property_read_s32(np, "maxim,over-heat-temp", &pdata->temp_max))
+ pdata->temp_max = INT_MAX;
+ if (of_property_read_s32(np, "maxim,dead-volt", &pdata->vmin))
+ pdata->vmin = INT_MIN;
+ if (of_property_read_s32(np, "maxim,over-volt", &pdata->vmax))
+ pdata->vmax = INT_MAX;
+
+ return pdata;
+}
+#endif
+
+static struct max17042_reg_data max17047_default_pdata_init_regs[] = {
+ /*
+ * Some firmwares do not set FullSOCThr, Enable End-of-Charge Detection
+ * when the voltage FG reports 95%, as recommended in the datasheet.
+ */
+ { MAX17047_FullSOCThr, MAX17042_BATTERY_FULL << 8 },
+};
+
+static struct max17042_platform_data *
+max17042_get_default_pdata(struct max17042_chip *chip)
+{
+ struct device *dev = &chip->client->dev;
+ struct max17042_platform_data *pdata;
+ int ret, misc_cfg;
+
+ /*
+ * The MAX17047 gets used on x86 where we might not have pdata, assume
+ * the firmware will already have initialized the fuel-gauge and provide
+ * default values for the non init bits to make things work.
+ */
+ pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
+ if (!pdata)
+ return pdata;
+
+ if ((chip->chip_type == MAXIM_DEVICE_TYPE_MAX17047) ||
+ (chip->chip_type == MAXIM_DEVICE_TYPE_MAX17050)) {
+ pdata->init_data = max17047_default_pdata_init_regs;
+ pdata->num_init_data =
+ ARRAY_SIZE(max17047_default_pdata_init_regs);
+ }
+
+ ret = regmap_read(chip->regmap, MAX17042_MiscCFG, &misc_cfg);
+ if (ret < 0)
+ return NULL;
+
+ /* If bits 0-1 are set to 3 then only Voltage readings are used */
+ if ((misc_cfg & 0x3) == 0x3)
+ pdata->enable_current_sense = false;
+ else
+ pdata->enable_current_sense = true;
+
+ pdata->vmin = MAX17042_DEFAULT_VMIN;
+ pdata->vmax = MAX17042_DEFAULT_VMAX;
+ pdata->temp_min = MAX17042_DEFAULT_TEMP_MIN;
+ pdata->temp_max = MAX17042_DEFAULT_TEMP_MAX;
+
+ return pdata;
+}
+
+static struct max17042_platform_data *
+max17042_get_pdata(struct max17042_chip *chip)
+{
+ struct device *dev = &chip->client->dev;
+
+#ifdef CONFIG_OF
+ if (dev->of_node)
+ return max17042_get_of_pdata(chip);
+#endif
+ if (dev->platform_data)
+ return dev->platform_data;
+
+ return max17042_get_default_pdata(chip);
+}
+
+static const struct regmap_config max17042_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 16,
+ .val_format_endian = REGMAP_ENDIAN_NATIVE,
+};
+
+static const struct power_supply_desc max17042_psy_desc = {
+ .name = "max170xx_battery",
+ .type = POWER_SUPPLY_TYPE_BATTERY,
+ .get_property = max17042_get_property,
+ .set_property = max17042_set_property,
+ .property_is_writeable = max17042_property_is_writeable,
+ .external_power_changed = max17042_external_power_changed,
+ .properties = max17042_battery_props,
+ .num_properties = ARRAY_SIZE(max17042_battery_props),
+};
+
+static const struct power_supply_desc max17042_no_current_sense_psy_desc = {
+ .name = "max170xx_battery",
+ .type = POWER_SUPPLY_TYPE_BATTERY,
+ .get_property = max17042_get_property,
+ .set_property = max17042_set_property,
+ .property_is_writeable = max17042_property_is_writeable,
+ .properties = max17042_battery_props,
+ .num_properties = ARRAY_SIZE(max17042_battery_props) - 2,
+};
+
+static void max17042_stop_work(void *data)
+{
+ struct max17042_chip *chip = data;
+
+ cancel_work_sync(&chip->work);
+}
+
+static int max17042_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct i2c_adapter *adapter = client->adapter;
+ const struct power_supply_desc *max17042_desc = &max17042_psy_desc;
+ struct power_supply_config psy_cfg = {};
+ const struct acpi_device_id *acpi_id = NULL;
+ struct device *dev = &client->dev;
+ struct max17042_chip *chip;
+ int ret;
+ int i;
+ u32 val;
+
+ if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_WORD_DATA))
+ return -EIO;
+
+ chip = devm_kzalloc(&client->dev, sizeof(*chip), GFP_KERNEL);
+ if (!chip)
+ return -ENOMEM;
+
+ chip->client = client;
+ if (id) {
+ chip->chip_type = id->driver_data;
+ } else {
+ acpi_id = acpi_match_device(dev->driver->acpi_match_table, dev);
+ if (!acpi_id)
+ return -ENODEV;
+
+ chip->chip_type = acpi_id->driver_data;
+ }
+ chip->regmap = devm_regmap_init_i2c(client, &max17042_regmap_config);
+ if (IS_ERR(chip->regmap)) {
+ dev_err(&client->dev, "Failed to initialize regmap\n");
+ return -EINVAL;
+ }
+
+ chip->pdata = max17042_get_pdata(chip);
+ if (!chip->pdata) {
+ dev_err(&client->dev, "no platform data provided\n");
+ return -EINVAL;
+ }
+
+ i2c_set_clientdata(client, chip);
+ psy_cfg.drv_data = chip;
+ psy_cfg.of_node = dev->of_node;
+
+ /* When current is not measured,
+ * CURRENT_NOW and CURRENT_AVG properties should be invisible. */
+ if (!chip->pdata->enable_current_sense)
+ max17042_desc = &max17042_no_current_sense_psy_desc;
+
+ if (chip->pdata->r_sns == 0)
+ chip->pdata->r_sns = MAX17042_DEFAULT_SNS_RESISTOR;
+
+ if (chip->pdata->init_data)
+ for (i = 0; i < chip->pdata->num_init_data; i++)
+ regmap_write(chip->regmap,
+ chip->pdata->init_data[i].addr,
+ chip->pdata->init_data[i].data);
+
+ if (!chip->pdata->enable_current_sense) {
+ regmap_write(chip->regmap, MAX17042_CGAIN, 0x0000);
+ regmap_write(chip->regmap, MAX17042_MiscCFG, 0x0003);
+ regmap_write(chip->regmap, MAX17042_LearnCFG, 0x0007);
+ }
+
+ chip->battery = devm_power_supply_register(&client->dev, max17042_desc,
+ &psy_cfg);
+ if (IS_ERR(chip->battery)) {
+ dev_err(&client->dev, "failed: power supply register\n");
+ return PTR_ERR(chip->battery);
+ }
+
+ if (client->irq) {
+ unsigned int flags = IRQF_ONESHOT;
+
+ /*
+ * On ACPI systems the IRQ may be handled by ACPI-event code,
+ * so we need to share (if the ACPI code is willing to share).
+ */
+ if (acpi_id)
+ flags |= IRQF_SHARED | IRQF_PROBE_SHARED;
+
+ ret = devm_request_threaded_irq(&client->dev, client->irq,
+ NULL,
+ max17042_thread_handler, flags,
+ chip->battery->desc->name,
+ chip);
+ if (!ret) {
+ regmap_update_bits(chip->regmap, MAX17042_CONFIG,
+ CONFIG_ALRT_BIT_ENBL,
+ CONFIG_ALRT_BIT_ENBL);
+ max17042_set_soc_threshold(chip, 1);
+ } else {
+ client->irq = 0;
+ if (ret != -EBUSY)
+ dev_err(&client->dev, "Failed to get IRQ\n");
+ }
+ }
+ /* Not able to update the charge threshold when exceeded? -> disable */
+ if (!client->irq)
+ regmap_write(chip->regmap, MAX17042_SALRT_Th, 0xff00);
+
+ regmap_read(chip->regmap, MAX17042_STATUS, &val);
+ if (val & STATUS_POR_BIT) {
+ INIT_WORK(&chip->work, max17042_init_worker);
+ ret = devm_add_action(&client->dev, max17042_stop_work, chip);
+ if (ret)
+ return ret;
+ schedule_work(&chip->work);
+ } else {
+ chip->init_complete = 1;
+ }
+
+ return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int max17042_suspend(struct device *dev)
+{
+ struct max17042_chip *chip = dev_get_drvdata(dev);
+
+ /*
+ * disable the irq and enable irq_wake
+ * capability to the interrupt line.
+ */
+ if (chip->client->irq) {
+ disable_irq(chip->client->irq);
+ enable_irq_wake(chip->client->irq);
+ }
+
+ return 0;
+}
+
+static int max17042_resume(struct device *dev)
+{
+ struct max17042_chip *chip = dev_get_drvdata(dev);
+
+ if (chip->client->irq) {
+ disable_irq_wake(chip->client->irq);
+ enable_irq(chip->client->irq);
+ /* re-program the SOC thresholds to 1% change */
+ max17042_set_soc_threshold(chip, 1);
+ }
+
+ return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(max17042_pm_ops, max17042_suspend,
+ max17042_resume);
+
+#ifdef CONFIG_ACPI
+static const struct acpi_device_id max17042_acpi_match[] = {
+ { "MAX17047", MAXIM_DEVICE_TYPE_MAX17047 },
+ { }
+};
+MODULE_DEVICE_TABLE(acpi, max17042_acpi_match);
+#endif
+
+#ifdef CONFIG_OF
+static const struct of_device_id max17042_dt_match[] = {
+ { .compatible = "maxim,max17042" },
+ { .compatible = "maxim,max17047" },
+ { .compatible = "maxim,max17050" },
+ { .compatible = "maxim,max17055" },
+ { },
+};
+MODULE_DEVICE_TABLE(of, max17042_dt_match);
+#endif
+
+static const struct i2c_device_id max17042_id[] = {
+ { "max17042", MAXIM_DEVICE_TYPE_MAX17042 },
+ { "max17047", MAXIM_DEVICE_TYPE_MAX17047 },
+ { "max17050", MAXIM_DEVICE_TYPE_MAX17050 },
+ { "max17055", MAXIM_DEVICE_TYPE_MAX17055 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, max17042_id);
+
+static struct i2c_driver max17042_i2c_driver = {
+ .driver = {
+ .name = "max17042",
+ .acpi_match_table = ACPI_PTR(max17042_acpi_match),
+ .of_match_table = of_match_ptr(max17042_dt_match),
+ .pm = &max17042_pm_ops,
+ },
+ .probe = max17042_probe,
+ .id_table = max17042_id,
+};
+module_i2c_driver(max17042_i2c_driver);
+
+MODULE_AUTHOR("MyungJoo Ham <myungjoo.ham@samsung.com>");
+MODULE_DESCRIPTION("MAX17042 Fuel Gauge");
+MODULE_LICENSE("GPL");
diff --git a/drivers/power/supply/max1721x_battery.c b/drivers/power/supply/max1721x_battery.c
new file mode 100644
index 000000000..1b1a36f8e
--- /dev/null
+++ b/drivers/power/supply/max1721x_battery.c
@@ -0,0 +1,448 @@
+/*
+ * 1-Wire implementation for Maxim Semiconductor
+ * MAX7211/MAX17215 stanalone fuel gauge chip
+ *
+ * Copyright (C) 2017 Radioavionica Corporation
+ * Author: Alex A. Mihaylov <minimumlaw@rambler.ru>
+ *
+ * Use consistent with the GNU GPL is permitted,
+ * provided that this copyright notice is
+ * preserved in its entirety in all copies and derived works.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/w1.h>
+#include <linux/regmap.h>
+#include <linux/power_supply.h>
+
+#define W1_MAX1721X_FAMILY_ID 0x26
+#define DEF_DEV_NAME_MAX17211 "MAX17211"
+#define DEF_DEV_NAME_MAX17215 "MAX17215"
+#define DEF_DEV_NAME_UNKNOWN "UNKNOWN"
+#define DEF_MFG_NAME "MAXIM"
+
+#define PSY_MAX_NAME_LEN 32
+
+/* Number of valid register addresses in W1 mode */
+#define MAX1721X_MAX_REG_NR 0x1EF
+
+/* Factory settings (nonvilatile registers) (W1 specific) */
+#define MAX1721X_REG_NRSENSE 0x1CF /* RSense in 10^-5 Ohm */
+/* Strings */
+#define MAX1721X_REG_MFG_STR 0x1CC
+#define MAX1721X_REG_MFG_NUMB 3
+#define MAX1721X_REG_DEV_STR 0x1DB
+#define MAX1721X_REG_DEV_NUMB 5
+/* HEX Strings */
+#define MAX1721X_REG_SER_HEX 0x1D8
+
+/* MAX172XX Output Registers for W1 chips */
+#define MAX172XX_REG_STATUS 0x000 /* status reg */
+#define MAX172XX_BAT_PRESENT (1<<4) /* battery connected bit */
+#define MAX172XX_REG_DEVNAME 0x021 /* chip config */
+#define MAX172XX_DEV_MASK 0x000F /* chip type mask */
+#define MAX172X1_DEV 0x0001
+#define MAX172X5_DEV 0x0005
+#define MAX172XX_REG_TEMP 0x008 /* Temperature */
+#define MAX172XX_REG_BATT 0x0DA /* Battery voltage */
+#define MAX172XX_REG_CURRENT 0x00A /* Actual current */
+#define MAX172XX_REG_AVGCURRENT 0x00B /* Average current */
+#define MAX172XX_REG_REPSOC 0x006 /* Percentage of charge */
+#define MAX172XX_REG_DESIGNCAP 0x018 /* Design capacity */
+#define MAX172XX_REG_REPCAP 0x005 /* Average capacity */
+#define MAX172XX_REG_TTE 0x011 /* Time to empty */
+#define MAX172XX_REG_TTF 0x020 /* Time to full */
+
+struct max17211_device_info {
+ char name[PSY_MAX_NAME_LEN];
+ struct power_supply *bat;
+ struct power_supply_desc bat_desc;
+ struct device *w1_dev;
+ struct regmap *regmap;
+ /* battery design format */
+ unsigned int rsense; /* in tenths uOhm */
+ char DeviceName[2 * MAX1721X_REG_DEV_NUMB + 1];
+ char ManufacturerName[2 * MAX1721X_REG_MFG_NUMB + 1];
+ char SerialNumber[13]; /* see get_sn_str() later for comment */
+};
+
+/* Convert regs value to power_supply units */
+
+static inline int max172xx_time_to_ps(unsigned int reg)
+{
+ return reg * 5625 / 1000; /* in sec. */
+}
+
+static inline int max172xx_percent_to_ps(unsigned int reg)
+{
+ return reg / 256; /* in percent from 0 to 100 */
+}
+
+static inline int max172xx_voltage_to_ps(unsigned int reg)
+{
+ return reg * 1250; /* in uV */
+}
+
+static inline int max172xx_capacity_to_ps(unsigned int reg)
+{
+ return reg * 500; /* in uAh */
+}
+
+/*
+ * Current and temperature is signed values, so unsigned regs
+ * value must be converted to signed type
+ */
+
+static inline int max172xx_temperature_to_ps(unsigned int reg)
+{
+ int val = (int16_t)(reg);
+
+ return val * 10 / 256; /* in tenths of deg. C */
+}
+
+/*
+ * Calculating current registers resolution:
+ *
+ * RSense stored in 10^-5 Ohm, so mesaurment voltage must be
+ * in 10^-11 Volts for get current in uA.
+ * 16 bit current reg fullscale +/-51.2mV is 102400 uV.
+ * So: 102400 / 65535 * 10^5 = 156252
+ */
+static inline int max172xx_current_to_voltage(unsigned int reg)
+{
+ int val = (int16_t)(reg);
+
+ return val * 156252;
+}
+
+
+static inline struct max17211_device_info *
+to_device_info(struct power_supply *psy)
+{
+ return power_supply_get_drvdata(psy);
+}
+
+static int max1721x_battery_get_property(struct power_supply *psy,
+ enum power_supply_property psp,
+ union power_supply_propval *val)
+{
+ struct max17211_device_info *info = to_device_info(psy);
+ unsigned int reg = 0;
+ int ret = 0;
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_PRESENT:
+ /*
+ * POWER_SUPPLY_PROP_PRESENT will always readable via
+ * sysfs interface. Value return 0 if battery not
+ * present or unaccesable via W1.
+ */
+ val->intval =
+ regmap_read(info->regmap, MAX172XX_REG_STATUS,
+ &reg) ? 0 : !(reg & MAX172XX_BAT_PRESENT);
+ break;
+ case POWER_SUPPLY_PROP_CAPACITY:
+ ret = regmap_read(info->regmap, MAX172XX_REG_REPSOC, &reg);
+ val->intval = max172xx_percent_to_ps(reg);
+ break;
+ case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+ ret = regmap_read(info->regmap, MAX172XX_REG_BATT, &reg);
+ val->intval = max172xx_voltage_to_ps(reg);
+ break;
+ case POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN:
+ ret = regmap_read(info->regmap, MAX172XX_REG_DESIGNCAP, &reg);
+ val->intval = max172xx_capacity_to_ps(reg);
+ break;
+ case POWER_SUPPLY_PROP_CHARGE_AVG:
+ ret = regmap_read(info->regmap, MAX172XX_REG_REPCAP, &reg);
+ val->intval = max172xx_capacity_to_ps(reg);
+ break;
+ case POWER_SUPPLY_PROP_TIME_TO_EMPTY_AVG:
+ ret = regmap_read(info->regmap, MAX172XX_REG_TTE, &reg);
+ val->intval = max172xx_time_to_ps(reg);
+ break;
+ case POWER_SUPPLY_PROP_TIME_TO_FULL_AVG:
+ ret = regmap_read(info->regmap, MAX172XX_REG_TTF, &reg);
+ val->intval = max172xx_time_to_ps(reg);
+ break;
+ case POWER_SUPPLY_PROP_TEMP:
+ ret = regmap_read(info->regmap, MAX172XX_REG_TEMP, &reg);
+ val->intval = max172xx_temperature_to_ps(reg);
+ break;
+ /* We need signed current, so must cast info->rsense to signed type */
+ case POWER_SUPPLY_PROP_CURRENT_NOW:
+ ret = regmap_read(info->regmap, MAX172XX_REG_CURRENT, &reg);
+ val->intval =
+ max172xx_current_to_voltage(reg) / (int)info->rsense;
+ break;
+ case POWER_SUPPLY_PROP_CURRENT_AVG:
+ ret = regmap_read(info->regmap, MAX172XX_REG_AVGCURRENT, &reg);
+ val->intval =
+ max172xx_current_to_voltage(reg) / (int)info->rsense;
+ break;
+ /*
+ * Strings already received and inited by probe.
+ * We do dummy read for check battery still available.
+ */
+ case POWER_SUPPLY_PROP_MODEL_NAME:
+ ret = regmap_read(info->regmap, MAX1721X_REG_DEV_STR, &reg);
+ val->strval = info->DeviceName;
+ break;
+ case POWER_SUPPLY_PROP_MANUFACTURER:
+ ret = regmap_read(info->regmap, MAX1721X_REG_MFG_STR, &reg);
+ val->strval = info->ManufacturerName;
+ break;
+ case POWER_SUPPLY_PROP_SERIAL_NUMBER:
+ ret = regmap_read(info->regmap, MAX1721X_REG_SER_HEX, &reg);
+ val->strval = info->SerialNumber;
+ break;
+ default:
+ ret = -EINVAL;
+ }
+
+ return ret;
+}
+
+static enum power_supply_property max1721x_battery_props[] = {
+ /* int */
+ POWER_SUPPLY_PROP_PRESENT,
+ POWER_SUPPLY_PROP_CAPACITY,
+ POWER_SUPPLY_PROP_VOLTAGE_NOW,
+ POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN,
+ POWER_SUPPLY_PROP_CHARGE_AVG,
+ POWER_SUPPLY_PROP_TIME_TO_EMPTY_AVG,
+ POWER_SUPPLY_PROP_TIME_TO_FULL_AVG,
+ POWER_SUPPLY_PROP_TEMP,
+ POWER_SUPPLY_PROP_CURRENT_NOW,
+ POWER_SUPPLY_PROP_CURRENT_AVG,
+ /* strings */
+ POWER_SUPPLY_PROP_MODEL_NAME,
+ POWER_SUPPLY_PROP_MANUFACTURER,
+ POWER_SUPPLY_PROP_SERIAL_NUMBER,
+};
+
+static int get_string(struct max17211_device_info *info,
+ uint16_t reg, uint8_t nr, char *str)
+{
+ unsigned int val;
+
+ if (!str || !(reg == MAX1721X_REG_MFG_STR ||
+ reg == MAX1721X_REG_DEV_STR))
+ return -EFAULT;
+
+ while (nr--) {
+ if (regmap_read(info->regmap, reg++, &val))
+ return -EFAULT;
+ *str++ = val>>8 & 0x00FF;
+ *str++ = val & 0x00FF;
+ }
+ return 0;
+}
+
+/* Maxim say: Serial number is a hex string up to 12 hex characters */
+static int get_sn_string(struct max17211_device_info *info, char *str)
+{
+ unsigned int val[3];
+
+ if (!str)
+ return -EFAULT;
+
+ if (regmap_read(info->regmap, MAX1721X_REG_SER_HEX, &val[0]))
+ return -EFAULT;
+ if (regmap_read(info->regmap, MAX1721X_REG_SER_HEX + 1, &val[1]))
+ return -EFAULT;
+ if (regmap_read(info->regmap, MAX1721X_REG_SER_HEX + 2, &val[2]))
+ return -EFAULT;
+
+ snprintf(str, 13, "%04X%04X%04X", val[0], val[1], val[2]);
+ return 0;
+}
+
+/*
+ * MAX1721x registers description for w1-regmap
+ */
+static const struct regmap_range max1721x_allow_range[] = {
+ regmap_reg_range(0, 0xDF), /* volatile data */
+ regmap_reg_range(0x180, 0x1DF), /* non-volatile memory */
+ regmap_reg_range(0x1E0, 0x1EF), /* non-volatile history (unused) */
+};
+
+static const struct regmap_range max1721x_deny_range[] = {
+ /* volatile data unused registers */
+ regmap_reg_range(0x24, 0x26),
+ regmap_reg_range(0x30, 0x31),
+ regmap_reg_range(0x33, 0x34),
+ regmap_reg_range(0x37, 0x37),
+ regmap_reg_range(0x3B, 0x3C),
+ regmap_reg_range(0x40, 0x41),
+ regmap_reg_range(0x43, 0x44),
+ regmap_reg_range(0x47, 0x49),
+ regmap_reg_range(0x4B, 0x4C),
+ regmap_reg_range(0x4E, 0xAF),
+ regmap_reg_range(0xB1, 0xB3),
+ regmap_reg_range(0xB5, 0xB7),
+ regmap_reg_range(0xBF, 0xD0),
+ regmap_reg_range(0xDB, 0xDB),
+ /* hole between volatile and non-volatile registers */
+ regmap_reg_range(0xE0, 0x17F),
+};
+
+static const struct regmap_access_table max1721x_regs = {
+ .yes_ranges = max1721x_allow_range,
+ .n_yes_ranges = ARRAY_SIZE(max1721x_allow_range),
+ .no_ranges = max1721x_deny_range,
+ .n_no_ranges = ARRAY_SIZE(max1721x_deny_range),
+};
+
+/*
+ * Model Gauge M5 Algorithm output register
+ * Volatile data (must not be cached)
+ */
+static const struct regmap_range max1721x_volatile_allow[] = {
+ regmap_reg_range(0, 0xDF),
+};
+
+static const struct regmap_access_table max1721x_volatile_regs = {
+ .yes_ranges = max1721x_volatile_allow,
+ .n_yes_ranges = ARRAY_SIZE(max1721x_volatile_allow),
+};
+
+/*
+ * W1-regmap config
+ */
+static const struct regmap_config max1721x_regmap_w1_config = {
+ .reg_bits = 16,
+ .val_bits = 16,
+ .rd_table = &max1721x_regs,
+ .volatile_table = &max1721x_volatile_regs,
+ .max_register = MAX1721X_MAX_REG_NR,
+};
+
+static int devm_w1_max1721x_add_device(struct w1_slave *sl)
+{
+ struct power_supply_config psy_cfg = {};
+ struct max17211_device_info *info;
+
+ info = devm_kzalloc(&sl->dev, sizeof(*info), GFP_KERNEL);
+ if (!info)
+ return -ENOMEM;
+
+ sl->family_data = (void *)info;
+ info->w1_dev = &sl->dev;
+
+ /*
+ * power_supply class battery name translated from W1 slave device
+ * unical ID (look like 26-0123456789AB) to "max1721x-0123456789AB\0"
+ * so, 26 (device family) correcpondent to max1721x devices.
+ * Device name still unical for any numbers connected devices.
+ */
+ snprintf(info->name, sizeof(info->name),
+ "max1721x-%012X", (unsigned int)sl->reg_num.id);
+ info->bat_desc.name = info->name;
+
+ /*
+ * FixMe: battery device name exceed max len for thermal_zone device
+ * name and translation to thermal_zone must be disabled.
+ */
+ info->bat_desc.no_thermal = true;
+ info->bat_desc.type = POWER_SUPPLY_TYPE_BATTERY;
+ info->bat_desc.properties = max1721x_battery_props;
+ info->bat_desc.num_properties = ARRAY_SIZE(max1721x_battery_props);
+ info->bat_desc.get_property = max1721x_battery_get_property;
+ psy_cfg.drv_data = info;
+
+ /* regmap init */
+ info->regmap = devm_regmap_init_w1(info->w1_dev,
+ &max1721x_regmap_w1_config);
+ if (IS_ERR(info->regmap)) {
+ int err = PTR_ERR(info->regmap);
+
+ dev_err(info->w1_dev, "Failed to allocate register map: %d\n",
+ err);
+ return err;
+ }
+
+ /* rsense init */
+ info->rsense = 0;
+ if (regmap_read(info->regmap, MAX1721X_REG_NRSENSE, &info->rsense)) {
+ dev_err(info->w1_dev, "Can't read RSense. Hardware error.\n");
+ return -ENODEV;
+ }
+
+ if (!info->rsense) {
+ dev_warn(info->w1_dev, "RSense not calibrated, set 10 mOhms!\n");
+ info->rsense = 1000; /* in regs in 10^-5 */
+ }
+ dev_info(info->w1_dev, "RSense: %d mOhms.\n", info->rsense / 100);
+
+ if (get_string(info, MAX1721X_REG_MFG_STR,
+ MAX1721X_REG_MFG_NUMB, info->ManufacturerName)) {
+ dev_err(info->w1_dev, "Can't read manufacturer. Hardware error.\n");
+ return -ENODEV;
+ }
+
+ if (!info->ManufacturerName[0])
+ strncpy(info->ManufacturerName, DEF_MFG_NAME,
+ 2 * MAX1721X_REG_MFG_NUMB);
+
+ if (get_string(info, MAX1721X_REG_DEV_STR,
+ MAX1721X_REG_DEV_NUMB, info->DeviceName)) {
+ dev_err(info->w1_dev, "Can't read device. Hardware error.\n");
+ return -ENODEV;
+ }
+ if (!info->DeviceName[0]) {
+ unsigned int dev_name;
+
+ if (regmap_read(info->regmap,
+ MAX172XX_REG_DEVNAME, &dev_name)) {
+ dev_err(info->w1_dev, "Can't read device name reg.\n");
+ return -ENODEV;
+ }
+
+ switch (dev_name & MAX172XX_DEV_MASK) {
+ case MAX172X1_DEV:
+ strncpy(info->DeviceName, DEF_DEV_NAME_MAX17211,
+ 2 * MAX1721X_REG_DEV_NUMB);
+ break;
+ case MAX172X5_DEV:
+ strncpy(info->DeviceName, DEF_DEV_NAME_MAX17215,
+ 2 * MAX1721X_REG_DEV_NUMB);
+ break;
+ default:
+ strncpy(info->DeviceName, DEF_DEV_NAME_UNKNOWN,
+ 2 * MAX1721X_REG_DEV_NUMB);
+ }
+ }
+
+ if (get_sn_string(info, info->SerialNumber)) {
+ dev_err(info->w1_dev, "Can't read serial. Hardware error.\n");
+ return -ENODEV;
+ }
+
+ info->bat = devm_power_supply_register(&sl->dev, &info->bat_desc,
+ &psy_cfg);
+ if (IS_ERR(info->bat)) {
+ dev_err(info->w1_dev, "failed to register battery\n");
+ return PTR_ERR(info->bat);
+ }
+
+ return 0;
+}
+
+static const struct w1_family_ops w1_max1721x_fops = {
+ .add_slave = devm_w1_max1721x_add_device,
+};
+
+static struct w1_family w1_max1721x_family = {
+ .fid = W1_MAX1721X_FAMILY_ID,
+ .fops = &w1_max1721x_fops,
+};
+
+module_w1_family(w1_max1721x_family);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Alex A. Mihaylov <minimumlaw@rambler.ru>");
+MODULE_DESCRIPTION("Maxim MAX17211/MAX17215 Fuel Gauage IC driver");
+MODULE_ALIAS("w1-family-" __stringify(W1_MAX1721X_FAMILY_ID));
diff --git a/drivers/power/supply/max77650-charger.c b/drivers/power/supply/max77650-charger.c
new file mode 100644
index 000000000..d913428be
--- /dev/null
+++ b/drivers/power/supply/max77650-charger.c
@@ -0,0 +1,376 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (C) 2018 BayLibre SAS
+// Author: Bartosz Golaszewski <bgolaszewski@baylibre.com>
+//
+// Battery charger driver for MAXIM 77650/77651 charger/power-supply.
+
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/mfd/max77650.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/power_supply.h>
+#include <linux/regmap.h>
+
+#define MAX77650_CHARGER_ENABLED BIT(0)
+#define MAX77650_CHARGER_DISABLED 0x00
+#define MAX77650_CHARGER_CHG_EN_MASK BIT(0)
+
+#define MAX77650_CHG_DETAILS_MASK GENMASK(7, 4)
+#define MAX77650_CHG_DETAILS_BITS(_reg) \
+ (((_reg) & MAX77650_CHG_DETAILS_MASK) >> 4)
+
+/* Charger is OFF. */
+#define MAX77650_CHG_OFF 0x00
+/* Charger is in prequalification mode. */
+#define MAX77650_CHG_PREQ 0x01
+/* Charger is in fast-charge constant current mode. */
+#define MAX77650_CHG_ON_CURR 0x02
+/* Charger is in JEITA modified fast-charge constant-current mode. */
+#define MAX77650_CHG_ON_CURR_JEITA 0x03
+/* Charger is in fast-charge constant-voltage mode. */
+#define MAX77650_CHG_ON_VOLT 0x04
+/* Charger is in JEITA modified fast-charge constant-voltage mode. */
+#define MAX77650_CHG_ON_VOLT_JEITA 0x05
+/* Charger is in top-off mode. */
+#define MAX77650_CHG_ON_TOPOFF 0x06
+/* Charger is in JEITA modified top-off mode. */
+#define MAX77650_CHG_ON_TOPOFF_JEITA 0x07
+/* Charger is done. */
+#define MAX77650_CHG_DONE 0x08
+/* Charger is JEITA modified done. */
+#define MAX77650_CHG_DONE_JEITA 0x09
+/* Charger is suspended due to a prequalification timer fault. */
+#define MAX77650_CHG_SUSP_PREQ_TIM_FAULT 0x0a
+/* Charger is suspended due to a fast-charge timer fault. */
+#define MAX77650_CHG_SUSP_FAST_CHG_TIM_FAULT 0x0b
+/* Charger is suspended due to a battery temperature fault. */
+#define MAX77650_CHG_SUSP_BATT_TEMP_FAULT 0x0c
+
+#define MAX77650_CHGIN_DETAILS_MASK GENMASK(3, 2)
+#define MAX77650_CHGIN_DETAILS_BITS(_reg) \
+ (((_reg) & MAX77650_CHGIN_DETAILS_MASK) >> 2)
+
+#define MAX77650_CHGIN_UNDERVOLTAGE_LOCKOUT 0x00
+#define MAX77650_CHGIN_OVERVOLTAGE_LOCKOUT 0x01
+#define MAX77650_CHGIN_OKAY 0x11
+
+#define MAX77650_CHARGER_CHG_MASK BIT(1)
+#define MAX77650_CHARGER_CHG_CHARGING(_reg) \
+ (((_reg) & MAX77650_CHARGER_CHG_MASK) > 1)
+
+#define MAX77650_CHARGER_VCHGIN_MIN_MASK 0xc0
+#define MAX77650_CHARGER_VCHGIN_MIN_SHIFT(_val) ((_val) << 5)
+
+#define MAX77650_CHARGER_ICHGIN_LIM_MASK 0x1c
+#define MAX77650_CHARGER_ICHGIN_LIM_SHIFT(_val) ((_val) << 2)
+
+struct max77650_charger_data {
+ struct regmap *map;
+ struct device *dev;
+};
+
+static enum power_supply_property max77650_charger_properties[] = {
+ POWER_SUPPLY_PROP_STATUS,
+ POWER_SUPPLY_PROP_ONLINE,
+ POWER_SUPPLY_PROP_CHARGE_TYPE
+};
+
+static const unsigned int max77650_charger_vchgin_min_table[] = {
+ 4000000, 4100000, 4200000, 4300000, 4400000, 4500000, 4600000, 4700000
+};
+
+static const unsigned int max77650_charger_ichgin_lim_table[] = {
+ 95000, 190000, 285000, 380000, 475000
+};
+
+static int max77650_charger_set_vchgin_min(struct max77650_charger_data *chg,
+ unsigned int val)
+{
+ int i, rv;
+
+ for (i = 0; i < ARRAY_SIZE(max77650_charger_vchgin_min_table); i++) {
+ if (val == max77650_charger_vchgin_min_table[i]) {
+ rv = regmap_update_bits(chg->map,
+ MAX77650_REG_CNFG_CHG_B,
+ MAX77650_CHARGER_VCHGIN_MIN_MASK,
+ MAX77650_CHARGER_VCHGIN_MIN_SHIFT(i));
+ if (rv)
+ return rv;
+
+ return 0;
+ }
+ }
+
+ return -EINVAL;
+}
+
+static int max77650_charger_set_ichgin_lim(struct max77650_charger_data *chg,
+ unsigned int val)
+{
+ int i, rv;
+
+ for (i = 0; i < ARRAY_SIZE(max77650_charger_ichgin_lim_table); i++) {
+ if (val == max77650_charger_ichgin_lim_table[i]) {
+ rv = regmap_update_bits(chg->map,
+ MAX77650_REG_CNFG_CHG_B,
+ MAX77650_CHARGER_ICHGIN_LIM_MASK,
+ MAX77650_CHARGER_ICHGIN_LIM_SHIFT(i));
+ if (rv)
+ return rv;
+
+ return 0;
+ }
+ }
+
+ return -EINVAL;
+}
+
+static int max77650_charger_enable(struct max77650_charger_data *chg)
+{
+ int rv;
+
+ rv = regmap_update_bits(chg->map,
+ MAX77650_REG_CNFG_CHG_B,
+ MAX77650_CHARGER_CHG_EN_MASK,
+ MAX77650_CHARGER_ENABLED);
+ if (rv)
+ dev_err(chg->dev, "unable to enable the charger: %d\n", rv);
+
+ return rv;
+}
+
+static int max77650_charger_disable(struct max77650_charger_data *chg)
+{
+ int rv;
+
+ rv = regmap_update_bits(chg->map,
+ MAX77650_REG_CNFG_CHG_B,
+ MAX77650_CHARGER_CHG_EN_MASK,
+ MAX77650_CHARGER_DISABLED);
+ if (rv)
+ dev_err(chg->dev, "unable to disable the charger: %d\n", rv);
+
+ return rv;
+}
+
+static irqreturn_t max77650_charger_check_status(int irq, void *data)
+{
+ struct max77650_charger_data *chg = data;
+ int rv, reg;
+
+ rv = regmap_read(chg->map, MAX77650_REG_STAT_CHG_B, &reg);
+ if (rv) {
+ dev_err(chg->dev,
+ "unable to read the charger status: %d\n", rv);
+ return IRQ_HANDLED;
+ }
+
+ switch (MAX77650_CHGIN_DETAILS_BITS(reg)) {
+ case MAX77650_CHGIN_UNDERVOLTAGE_LOCKOUT:
+ dev_err(chg->dev, "undervoltage lockout detected, disabling charger\n");
+ max77650_charger_disable(chg);
+ break;
+ case MAX77650_CHGIN_OVERVOLTAGE_LOCKOUT:
+ dev_err(chg->dev, "overvoltage lockout detected, disabling charger\n");
+ max77650_charger_disable(chg);
+ break;
+ case MAX77650_CHGIN_OKAY:
+ max77650_charger_enable(chg);
+ break;
+ default:
+ /* May be 0x10 - debouncing */
+ break;
+ }
+
+ return IRQ_HANDLED;
+}
+
+static int max77650_charger_get_property(struct power_supply *psy,
+ enum power_supply_property psp,
+ union power_supply_propval *val)
+{
+ struct max77650_charger_data *chg = power_supply_get_drvdata(psy);
+ int rv, reg;
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_STATUS:
+ rv = regmap_read(chg->map, MAX77650_REG_STAT_CHG_B, &reg);
+ if (rv)
+ return rv;
+
+ if (MAX77650_CHARGER_CHG_CHARGING(reg)) {
+ val->intval = POWER_SUPPLY_STATUS_CHARGING;
+ break;
+ }
+
+ switch (MAX77650_CHG_DETAILS_BITS(reg)) {
+ case MAX77650_CHG_OFF:
+ case MAX77650_CHG_SUSP_PREQ_TIM_FAULT:
+ case MAX77650_CHG_SUSP_FAST_CHG_TIM_FAULT:
+ case MAX77650_CHG_SUSP_BATT_TEMP_FAULT:
+ val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING;
+ break;
+ case MAX77650_CHG_PREQ:
+ case MAX77650_CHG_ON_CURR:
+ case MAX77650_CHG_ON_CURR_JEITA:
+ case MAX77650_CHG_ON_VOLT:
+ case MAX77650_CHG_ON_VOLT_JEITA:
+ case MAX77650_CHG_ON_TOPOFF:
+ case MAX77650_CHG_ON_TOPOFF_JEITA:
+ val->intval = POWER_SUPPLY_STATUS_CHARGING;
+ break;
+ case MAX77650_CHG_DONE:
+ val->intval = POWER_SUPPLY_STATUS_FULL;
+ break;
+ default:
+ val->intval = POWER_SUPPLY_STATUS_UNKNOWN;
+ }
+ break;
+ case POWER_SUPPLY_PROP_ONLINE:
+ rv = regmap_read(chg->map, MAX77650_REG_STAT_CHG_B, &reg);
+ if (rv)
+ return rv;
+
+ val->intval = MAX77650_CHARGER_CHG_CHARGING(reg);
+ break;
+ case POWER_SUPPLY_PROP_CHARGE_TYPE:
+ rv = regmap_read(chg->map, MAX77650_REG_STAT_CHG_B, &reg);
+ if (rv)
+ return rv;
+
+ if (!MAX77650_CHARGER_CHG_CHARGING(reg)) {
+ val->intval = POWER_SUPPLY_CHARGE_TYPE_NONE;
+ break;
+ }
+
+ switch (MAX77650_CHG_DETAILS_BITS(reg)) {
+ case MAX77650_CHG_PREQ:
+ case MAX77650_CHG_ON_CURR:
+ case MAX77650_CHG_ON_CURR_JEITA:
+ case MAX77650_CHG_ON_VOLT:
+ case MAX77650_CHG_ON_VOLT_JEITA:
+ val->intval = POWER_SUPPLY_CHARGE_TYPE_FAST;
+ break;
+ case MAX77650_CHG_ON_TOPOFF:
+ case MAX77650_CHG_ON_TOPOFF_JEITA:
+ val->intval = POWER_SUPPLY_CHARGE_TYPE_TRICKLE;
+ break;
+ default:
+ val->intval = POWER_SUPPLY_CHARGE_TYPE_UNKNOWN;
+ }
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static const struct power_supply_desc max77650_battery_desc = {
+ .name = "max77650",
+ .type = POWER_SUPPLY_TYPE_USB,
+ .get_property = max77650_charger_get_property,
+ .properties = max77650_charger_properties,
+ .num_properties = ARRAY_SIZE(max77650_charger_properties),
+};
+
+static int max77650_charger_probe(struct platform_device *pdev)
+{
+ struct power_supply_config pscfg = {};
+ struct max77650_charger_data *chg;
+ struct power_supply *battery;
+ struct device *dev, *parent;
+ int rv, chg_irq, chgin_irq;
+ unsigned int prop;
+
+ dev = &pdev->dev;
+ parent = dev->parent;
+
+ chg = devm_kzalloc(dev, sizeof(*chg), GFP_KERNEL);
+ if (!chg)
+ return -ENOMEM;
+
+ platform_set_drvdata(pdev, chg);
+
+ chg->map = dev_get_regmap(parent, NULL);
+ if (!chg->map)
+ return -ENODEV;
+
+ chg->dev = dev;
+
+ pscfg.of_node = dev->of_node;
+ pscfg.drv_data = chg;
+
+ chg_irq = platform_get_irq_byname(pdev, "CHG");
+ if (chg_irq < 0)
+ return chg_irq;
+
+ chgin_irq = platform_get_irq_byname(pdev, "CHGIN");
+ if (chgin_irq < 0)
+ return chgin_irq;
+
+ rv = devm_request_any_context_irq(dev, chg_irq,
+ max77650_charger_check_status,
+ IRQF_ONESHOT, "chg", chg);
+ if (rv < 0)
+ return rv;
+
+ rv = devm_request_any_context_irq(dev, chgin_irq,
+ max77650_charger_check_status,
+ IRQF_ONESHOT, "chgin", chg);
+ if (rv < 0)
+ return rv;
+
+ battery = devm_power_supply_register(dev,
+ &max77650_battery_desc, &pscfg);
+ if (IS_ERR(battery))
+ return PTR_ERR(battery);
+
+ rv = of_property_read_u32(dev->of_node,
+ "input-voltage-min-microvolt", &prop);
+ if (rv == 0) {
+ rv = max77650_charger_set_vchgin_min(chg, prop);
+ if (rv)
+ return rv;
+ }
+
+ rv = of_property_read_u32(dev->of_node,
+ "input-current-limit-microamp", &prop);
+ if (rv == 0) {
+ rv = max77650_charger_set_ichgin_lim(chg, prop);
+ if (rv)
+ return rv;
+ }
+
+ return max77650_charger_enable(chg);
+}
+
+static int max77650_charger_remove(struct platform_device *pdev)
+{
+ struct max77650_charger_data *chg = platform_get_drvdata(pdev);
+
+ return max77650_charger_disable(chg);
+}
+
+static const struct of_device_id max77650_charger_of_match[] = {
+ { .compatible = "maxim,max77650-charger" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, max77650_charger_of_match);
+
+static struct platform_driver max77650_charger_driver = {
+ .driver = {
+ .name = "max77650-charger",
+ .of_match_table = max77650_charger_of_match,
+ },
+ .probe = max77650_charger_probe,
+ .remove = max77650_charger_remove,
+};
+module_platform_driver(max77650_charger_driver);
+
+MODULE_DESCRIPTION("MAXIM 77650/77651 charger driver");
+MODULE_AUTHOR("Bartosz Golaszewski <bgolaszewski@baylibre.com>");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:max77650-charger");
diff --git a/drivers/power/supply/max77693_charger.c b/drivers/power/supply/max77693_charger.c
new file mode 100644
index 000000000..a2c5c9858
--- /dev/null
+++ b/drivers/power/supply/max77693_charger.c
@@ -0,0 +1,762 @@
+// SPDX-License-Identifier: GPL-2.0+
+//
+// max77693_charger.c - Battery charger driver for the Maxim 77693
+//
+// Copyright (C) 2014 Samsung Electronics
+// Krzysztof Kozlowski <krzk@kernel.org>
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/power_supply.h>
+#include <linux/regmap.h>
+#include <linux/mfd/max77693.h>
+#include <linux/mfd/max77693-common.h>
+#include <linux/mfd/max77693-private.h>
+
+#define MAX77693_CHARGER_NAME "max77693-charger"
+static const char *max77693_charger_model = "MAX77693";
+static const char *max77693_charger_manufacturer = "Maxim Integrated";
+
+struct max77693_charger {
+ struct device *dev;
+ struct max77693_dev *max77693;
+ struct power_supply *charger;
+
+ u32 constant_volt;
+ u32 min_system_volt;
+ u32 thermal_regulation_temp;
+ u32 batttery_overcurrent;
+ u32 charge_input_threshold_volt;
+};
+
+static int max77693_get_charger_state(struct regmap *regmap, int *val)
+{
+ int ret;
+ unsigned int data;
+
+ ret = regmap_read(regmap, MAX77693_CHG_REG_CHG_DETAILS_01, &data);
+ if (ret < 0)
+ return ret;
+
+ data &= CHG_DETAILS_01_CHG_MASK;
+ data >>= CHG_DETAILS_01_CHG_SHIFT;
+
+ switch (data) {
+ case MAX77693_CHARGING_PREQUALIFICATION:
+ case MAX77693_CHARGING_FAST_CONST_CURRENT:
+ case MAX77693_CHARGING_FAST_CONST_VOLTAGE:
+ case MAX77693_CHARGING_TOP_OFF:
+ /* In high temp the charging current is reduced, but still charging */
+ case MAX77693_CHARGING_HIGH_TEMP:
+ *val = POWER_SUPPLY_STATUS_CHARGING;
+ break;
+ case MAX77693_CHARGING_DONE:
+ *val = POWER_SUPPLY_STATUS_FULL;
+ break;
+ case MAX77693_CHARGING_TIMER_EXPIRED:
+ case MAX77693_CHARGING_THERMISTOR_SUSPEND:
+ *val = POWER_SUPPLY_STATUS_NOT_CHARGING;
+ break;
+ case MAX77693_CHARGING_OFF:
+ case MAX77693_CHARGING_OVER_TEMP:
+ case MAX77693_CHARGING_WATCHDOG_EXPIRED:
+ *val = POWER_SUPPLY_STATUS_DISCHARGING;
+ break;
+ case MAX77693_CHARGING_RESERVED:
+ default:
+ *val = POWER_SUPPLY_STATUS_UNKNOWN;
+ }
+
+ return 0;
+}
+
+static int max77693_get_charge_type(struct regmap *regmap, int *val)
+{
+ int ret;
+ unsigned int data;
+
+ ret = regmap_read(regmap, MAX77693_CHG_REG_CHG_DETAILS_01, &data);
+ if (ret < 0)
+ return ret;
+
+ data &= CHG_DETAILS_01_CHG_MASK;
+ data >>= CHG_DETAILS_01_CHG_SHIFT;
+
+ switch (data) {
+ case MAX77693_CHARGING_PREQUALIFICATION:
+ /*
+ * Top-off: trickle or fast? In top-off the current varies between
+ * 100 and 250 mA. It is higher than prequalification current.
+ */
+ case MAX77693_CHARGING_TOP_OFF:
+ *val = POWER_SUPPLY_CHARGE_TYPE_TRICKLE;
+ break;
+ case MAX77693_CHARGING_FAST_CONST_CURRENT:
+ case MAX77693_CHARGING_FAST_CONST_VOLTAGE:
+ /* In high temp the charging current is reduced, but still charging */
+ case MAX77693_CHARGING_HIGH_TEMP:
+ *val = POWER_SUPPLY_CHARGE_TYPE_FAST;
+ break;
+ case MAX77693_CHARGING_DONE:
+ case MAX77693_CHARGING_TIMER_EXPIRED:
+ case MAX77693_CHARGING_THERMISTOR_SUSPEND:
+ case MAX77693_CHARGING_OFF:
+ case MAX77693_CHARGING_OVER_TEMP:
+ case MAX77693_CHARGING_WATCHDOG_EXPIRED:
+ *val = POWER_SUPPLY_CHARGE_TYPE_NONE;
+ break;
+ case MAX77693_CHARGING_RESERVED:
+ default:
+ *val = POWER_SUPPLY_CHARGE_TYPE_UNKNOWN;
+ }
+
+ return 0;
+}
+
+/*
+ * Supported health statuses:
+ * - POWER_SUPPLY_HEALTH_DEAD
+ * - POWER_SUPPLY_HEALTH_GOOD
+ * - POWER_SUPPLY_HEALTH_OVERVOLTAGE
+ * - POWER_SUPPLY_HEALTH_SAFETY_TIMER_EXPIRE
+ * - POWER_SUPPLY_HEALTH_UNKNOWN
+ * - POWER_SUPPLY_HEALTH_UNSPEC_FAILURE
+ */
+static int max77693_get_battery_health(struct regmap *regmap, int *val)
+{
+ int ret;
+ unsigned int data;
+
+ ret = regmap_read(regmap, MAX77693_CHG_REG_CHG_DETAILS_01, &data);
+ if (ret < 0)
+ return ret;
+
+ data &= CHG_DETAILS_01_BAT_MASK;
+ data >>= CHG_DETAILS_01_BAT_SHIFT;
+
+ switch (data) {
+ case MAX77693_BATTERY_NOBAT:
+ *val = POWER_SUPPLY_HEALTH_DEAD;
+ break;
+ case MAX77693_BATTERY_PREQUALIFICATION:
+ case MAX77693_BATTERY_GOOD:
+ case MAX77693_BATTERY_LOWVOLTAGE:
+ *val = POWER_SUPPLY_HEALTH_GOOD;
+ break;
+ case MAX77693_BATTERY_TIMER_EXPIRED:
+ /*
+ * Took longer to charge than expected, charging suspended.
+ * Damaged battery?
+ */
+ *val = POWER_SUPPLY_HEALTH_SAFETY_TIMER_EXPIRE;
+ break;
+ case MAX77693_BATTERY_OVERVOLTAGE:
+ *val = POWER_SUPPLY_HEALTH_OVERVOLTAGE;
+ break;
+ case MAX77693_BATTERY_OVERCURRENT:
+ *val = POWER_SUPPLY_HEALTH_UNSPEC_FAILURE;
+ break;
+ case MAX77693_BATTERY_RESERVED:
+ default:
+ *val = POWER_SUPPLY_HEALTH_UNKNOWN;
+ break;
+ }
+
+ return 0;
+}
+
+static int max77693_get_present(struct regmap *regmap, int *val)
+{
+ unsigned int data;
+ int ret;
+
+ /*
+ * Read CHG_INT_OK register. High DETBAT bit here should be
+ * equal to value 0x0 in CHG_DETAILS_01/BAT field.
+ */
+ ret = regmap_read(regmap, MAX77693_CHG_REG_CHG_INT_OK, &data);
+ if (ret < 0)
+ return ret;
+
+ *val = (data & CHG_INT_OK_DETBAT_MASK) ? 0 : 1;
+
+ return 0;
+}
+
+static int max77693_get_online(struct regmap *regmap, int *val)
+{
+ unsigned int data;
+ int ret;
+
+ ret = regmap_read(regmap, MAX77693_CHG_REG_CHG_INT_OK, &data);
+ if (ret < 0)
+ return ret;
+
+ *val = (data & CHG_INT_OK_CHGIN_MASK) ? 1 : 0;
+
+ return 0;
+}
+
+static enum power_supply_property max77693_charger_props[] = {
+ POWER_SUPPLY_PROP_STATUS,
+ POWER_SUPPLY_PROP_CHARGE_TYPE,
+ POWER_SUPPLY_PROP_HEALTH,
+ POWER_SUPPLY_PROP_PRESENT,
+ POWER_SUPPLY_PROP_ONLINE,
+ POWER_SUPPLY_PROP_MODEL_NAME,
+ POWER_SUPPLY_PROP_MANUFACTURER,
+};
+
+static int max77693_charger_get_property(struct power_supply *psy,
+ enum power_supply_property psp,
+ union power_supply_propval *val)
+{
+ struct max77693_charger *chg = power_supply_get_drvdata(psy);
+ struct regmap *regmap = chg->max77693->regmap;
+ int ret = 0;
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_STATUS:
+ ret = max77693_get_charger_state(regmap, &val->intval);
+ break;
+ case POWER_SUPPLY_PROP_CHARGE_TYPE:
+ ret = max77693_get_charge_type(regmap, &val->intval);
+ break;
+ case POWER_SUPPLY_PROP_HEALTH:
+ ret = max77693_get_battery_health(regmap, &val->intval);
+ break;
+ case POWER_SUPPLY_PROP_PRESENT:
+ ret = max77693_get_present(regmap, &val->intval);
+ break;
+ case POWER_SUPPLY_PROP_ONLINE:
+ ret = max77693_get_online(regmap, &val->intval);
+ break;
+ case POWER_SUPPLY_PROP_MODEL_NAME:
+ val->strval = max77693_charger_model;
+ break;
+ case POWER_SUPPLY_PROP_MANUFACTURER:
+ val->strval = max77693_charger_manufacturer;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return ret;
+}
+
+static const struct power_supply_desc max77693_charger_desc = {
+ .name = MAX77693_CHARGER_NAME,
+ .type = POWER_SUPPLY_TYPE_BATTERY,
+ .properties = max77693_charger_props,
+ .num_properties = ARRAY_SIZE(max77693_charger_props),
+ .get_property = max77693_charger_get_property,
+};
+
+static ssize_t device_attr_store(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t count,
+ int (*fn)(struct max77693_charger *, unsigned long))
+{
+ struct max77693_charger *chg = dev_get_drvdata(dev);
+ unsigned long val;
+ int ret;
+
+ ret = kstrtoul(buf, 10, &val);
+ if (ret)
+ return ret;
+
+ ret = fn(chg, val);
+ if (ret)
+ return ret;
+
+ return count;
+}
+
+static ssize_t fast_charge_timer_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct max77693_charger *chg = dev_get_drvdata(dev);
+ unsigned int data, val;
+ int ret;
+
+ ret = regmap_read(chg->max77693->regmap, MAX77693_CHG_REG_CHG_CNFG_01,
+ &data);
+ if (ret < 0)
+ return ret;
+
+ data &= CHG_CNFG_01_FCHGTIME_MASK;
+ data >>= CHG_CNFG_01_FCHGTIME_SHIFT;
+ switch (data) {
+ case 0x1 ... 0x7:
+ /* Starting from 4 hours, step by 2 hours */
+ val = 4 + (data - 1) * 2;
+ break;
+ case 0x0:
+ default:
+ val = 0;
+ break;
+ }
+
+ return scnprintf(buf, PAGE_SIZE, "%u\n", val);
+}
+
+static int max77693_set_fast_charge_timer(struct max77693_charger *chg,
+ unsigned long hours)
+{
+ unsigned int data;
+
+ /*
+ * 0x00 - disable
+ * 0x01 - 4h
+ * 0x02 - 6h
+ * ...
+ * 0x07 - 16h
+ * Round down odd values.
+ */
+ switch (hours) {
+ case 4 ... 16:
+ data = (hours - 4) / 2 + 1;
+ break;
+ case 0:
+ /* Disable */
+ data = 0;
+ break;
+ default:
+ return -EINVAL;
+ }
+ data <<= CHG_CNFG_01_FCHGTIME_SHIFT;
+
+ return regmap_update_bits(chg->max77693->regmap,
+ MAX77693_CHG_REG_CHG_CNFG_01,
+ CHG_CNFG_01_FCHGTIME_MASK, data);
+}
+
+static ssize_t fast_charge_timer_store(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t count)
+{
+ return device_attr_store(dev, attr, buf, count,
+ max77693_set_fast_charge_timer);
+}
+
+static ssize_t top_off_threshold_current_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct max77693_charger *chg = dev_get_drvdata(dev);
+ unsigned int data, val;
+ int ret;
+
+ ret = regmap_read(chg->max77693->regmap, MAX77693_CHG_REG_CHG_CNFG_03,
+ &data);
+ if (ret < 0)
+ return ret;
+
+ data &= CHG_CNFG_03_TOITH_MASK;
+ data >>= CHG_CNFG_03_TOITH_SHIFT;
+
+ if (data <= 0x04)
+ val = 100000 + data * 25000;
+ else
+ val = data * 50000;
+
+ return scnprintf(buf, PAGE_SIZE, "%u\n", val);
+}
+
+static int max77693_set_top_off_threshold_current(struct max77693_charger *chg,
+ unsigned long uamp)
+{
+ unsigned int data;
+
+ if (uamp < 100000 || uamp > 350000)
+ return -EINVAL;
+
+ if (uamp <= 200000)
+ data = (uamp - 100000) / 25000;
+ else
+ /* (200000, 350000> */
+ data = uamp / 50000;
+
+ data <<= CHG_CNFG_03_TOITH_SHIFT;
+
+ return regmap_update_bits(chg->max77693->regmap,
+ MAX77693_CHG_REG_CHG_CNFG_03,
+ CHG_CNFG_03_TOITH_MASK, data);
+}
+
+static ssize_t top_off_threshold_current_store(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t count)
+{
+ return device_attr_store(dev, attr, buf, count,
+ max77693_set_top_off_threshold_current);
+}
+
+static ssize_t top_off_timer_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct max77693_charger *chg = dev_get_drvdata(dev);
+ unsigned int data, val;
+ int ret;
+
+ ret = regmap_read(chg->max77693->regmap, MAX77693_CHG_REG_CHG_CNFG_03,
+ &data);
+ if (ret < 0)
+ return ret;
+
+ data &= CHG_CNFG_03_TOTIME_MASK;
+ data >>= CHG_CNFG_03_TOTIME_SHIFT;
+
+ val = data * 10;
+
+ return scnprintf(buf, PAGE_SIZE, "%u\n", val);
+}
+
+static int max77693_set_top_off_timer(struct max77693_charger *chg,
+ unsigned long minutes)
+{
+ unsigned int data;
+
+ if (minutes > 70)
+ return -EINVAL;
+
+ data = minutes / 10;
+ data <<= CHG_CNFG_03_TOTIME_SHIFT;
+
+ return regmap_update_bits(chg->max77693->regmap,
+ MAX77693_CHG_REG_CHG_CNFG_03,
+ CHG_CNFG_03_TOTIME_MASK, data);
+}
+
+static ssize_t top_off_timer_store(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t count)
+{
+ return device_attr_store(dev, attr, buf, count,
+ max77693_set_top_off_timer);
+}
+
+static DEVICE_ATTR_RW(fast_charge_timer);
+static DEVICE_ATTR_RW(top_off_threshold_current);
+static DEVICE_ATTR_RW(top_off_timer);
+
+static int max77693_set_constant_volt(struct max77693_charger *chg,
+ unsigned int uvolt)
+{
+ unsigned int data;
+
+ /*
+ * 0x00 - 3.650 V
+ * 0x01 - 3.675 V
+ * ...
+ * 0x1b - 4.325 V
+ * 0x1c - 4.340 V
+ * 0x1d - 4.350 V
+ * 0x1e - 4.375 V
+ * 0x1f - 4.400 V
+ */
+ if (uvolt >= 3650000 && uvolt < 4340000)
+ data = (uvolt - 3650000) / 25000;
+ else if (uvolt >= 4340000 && uvolt < 4350000)
+ data = 0x1c;
+ else if (uvolt >= 4350000 && uvolt <= 4400000)
+ data = 0x1d + (uvolt - 4350000) / 25000;
+ else {
+ dev_err(chg->dev, "Wrong value for charging constant voltage\n");
+ return -EINVAL;
+ }
+
+ data <<= CHG_CNFG_04_CHGCVPRM_SHIFT;
+
+ dev_dbg(chg->dev, "Charging constant voltage: %u (0x%x)\n", uvolt,
+ data);
+
+ return regmap_update_bits(chg->max77693->regmap,
+ MAX77693_CHG_REG_CHG_CNFG_04,
+ CHG_CNFG_04_CHGCVPRM_MASK, data);
+}
+
+static int max77693_set_min_system_volt(struct max77693_charger *chg,
+ unsigned int uvolt)
+{
+ unsigned int data;
+
+ if (uvolt < 3000000 || uvolt > 3700000) {
+ dev_err(chg->dev, "Wrong value for minimum system regulation voltage\n");
+ return -EINVAL;
+ }
+
+ data = (uvolt - 3000000) / 100000;
+
+ data <<= CHG_CNFG_04_MINVSYS_SHIFT;
+
+ dev_dbg(chg->dev, "Minimum system regulation voltage: %u (0x%x)\n",
+ uvolt, data);
+
+ return regmap_update_bits(chg->max77693->regmap,
+ MAX77693_CHG_REG_CHG_CNFG_04,
+ CHG_CNFG_04_MINVSYS_MASK, data);
+}
+
+static int max77693_set_thermal_regulation_temp(struct max77693_charger *chg,
+ unsigned int cels)
+{
+ unsigned int data;
+
+ switch (cels) {
+ case 70:
+ case 85:
+ case 100:
+ case 115:
+ data = (cels - 70) / 15;
+ break;
+ default:
+ dev_err(chg->dev, "Wrong value for thermal regulation loop temperature\n");
+ return -EINVAL;
+ }
+
+ data <<= CHG_CNFG_07_REGTEMP_SHIFT;
+
+ dev_dbg(chg->dev, "Thermal regulation loop temperature: %u (0x%x)\n",
+ cels, data);
+
+ return regmap_update_bits(chg->max77693->regmap,
+ MAX77693_CHG_REG_CHG_CNFG_07,
+ CHG_CNFG_07_REGTEMP_MASK, data);
+}
+
+static int max77693_set_batttery_overcurrent(struct max77693_charger *chg,
+ unsigned int uamp)
+{
+ unsigned int data;
+
+ if (uamp && (uamp < 2000000 || uamp > 3500000)) {
+ dev_err(chg->dev, "Wrong value for battery overcurrent\n");
+ return -EINVAL;
+ }
+
+ if (uamp)
+ data = ((uamp - 2000000) / 250000) + 1;
+ else
+ data = 0; /* disable */
+
+ data <<= CHG_CNFG_12_B2SOVRC_SHIFT;
+
+ dev_dbg(chg->dev, "Battery overcurrent: %u (0x%x)\n", uamp, data);
+
+ return regmap_update_bits(chg->max77693->regmap,
+ MAX77693_CHG_REG_CHG_CNFG_12,
+ CHG_CNFG_12_B2SOVRC_MASK, data);
+}
+
+static int max77693_set_charge_input_threshold_volt(struct max77693_charger *chg,
+ unsigned int uvolt)
+{
+ unsigned int data;
+
+ switch (uvolt) {
+ case 4300000:
+ data = 0x0;
+ break;
+ case 4700000:
+ case 4800000:
+ case 4900000:
+ data = (uvolt - 4700000) / 100000;
+ break;
+ default:
+ dev_err(chg->dev, "Wrong value for charge input voltage regulation threshold\n");
+ return -EINVAL;
+ }
+
+ data <<= CHG_CNFG_12_VCHGINREG_SHIFT;
+
+ dev_dbg(chg->dev, "Charge input voltage regulation threshold: %u (0x%x)\n",
+ uvolt, data);
+
+ return regmap_update_bits(chg->max77693->regmap,
+ MAX77693_CHG_REG_CHG_CNFG_12,
+ CHG_CNFG_12_VCHGINREG_MASK, data);
+}
+
+/*
+ * Sets charger registers to proper and safe default values.
+ */
+static int max77693_reg_init(struct max77693_charger *chg)
+{
+ int ret;
+ unsigned int data;
+
+ /* Unlock charger register protection */
+ data = (0x3 << CHG_CNFG_06_CHGPROT_SHIFT);
+ ret = regmap_update_bits(chg->max77693->regmap,
+ MAX77693_CHG_REG_CHG_CNFG_06,
+ CHG_CNFG_06_CHGPROT_MASK, data);
+ if (ret) {
+ dev_err(chg->dev, "Error unlocking registers: %d\n", ret);
+ return ret;
+ }
+
+ ret = max77693_set_fast_charge_timer(chg, DEFAULT_FAST_CHARGE_TIMER);
+ if (ret)
+ return ret;
+
+ ret = max77693_set_top_off_threshold_current(chg,
+ DEFAULT_TOP_OFF_THRESHOLD_CURRENT);
+ if (ret)
+ return ret;
+
+ ret = max77693_set_top_off_timer(chg, DEFAULT_TOP_OFF_TIMER);
+ if (ret)
+ return ret;
+
+ ret = max77693_set_constant_volt(chg, chg->constant_volt);
+ if (ret)
+ return ret;
+
+ ret = max77693_set_min_system_volt(chg, chg->min_system_volt);
+ if (ret)
+ return ret;
+
+ ret = max77693_set_thermal_regulation_temp(chg,
+ chg->thermal_regulation_temp);
+ if (ret)
+ return ret;
+
+ ret = max77693_set_batttery_overcurrent(chg, chg->batttery_overcurrent);
+ if (ret)
+ return ret;
+
+ return max77693_set_charge_input_threshold_volt(chg,
+ chg->charge_input_threshold_volt);
+}
+
+#ifdef CONFIG_OF
+static int max77693_dt_init(struct device *dev, struct max77693_charger *chg)
+{
+ struct device_node *np = dev->of_node;
+
+ if (!np) {
+ dev_err(dev, "no charger OF node\n");
+ return -EINVAL;
+ }
+
+ if (of_property_read_u32(np, "maxim,constant-microvolt",
+ &chg->constant_volt))
+ chg->constant_volt = DEFAULT_CONSTANT_VOLT;
+
+ if (of_property_read_u32(np, "maxim,min-system-microvolt",
+ &chg->min_system_volt))
+ chg->min_system_volt = DEFAULT_MIN_SYSTEM_VOLT;
+
+ if (of_property_read_u32(np, "maxim,thermal-regulation-celsius",
+ &chg->thermal_regulation_temp))
+ chg->thermal_regulation_temp = DEFAULT_THERMAL_REGULATION_TEMP;
+
+ if (of_property_read_u32(np, "maxim,battery-overcurrent-microamp",
+ &chg->batttery_overcurrent))
+ chg->batttery_overcurrent = DEFAULT_BATTERY_OVERCURRENT;
+
+ if (of_property_read_u32(np, "maxim,charge-input-threshold-microvolt",
+ &chg->charge_input_threshold_volt))
+ chg->charge_input_threshold_volt =
+ DEFAULT_CHARGER_INPUT_THRESHOLD_VOLT;
+
+ return 0;
+}
+#else /* CONFIG_OF */
+static int max77693_dt_init(struct device *dev, struct max77693_charger *chg)
+{
+ return 0;
+}
+#endif /* CONFIG_OF */
+
+static int max77693_charger_probe(struct platform_device *pdev)
+{
+ struct max77693_charger *chg;
+ struct power_supply_config psy_cfg = {};
+ struct max77693_dev *max77693 = dev_get_drvdata(pdev->dev.parent);
+ int ret;
+
+ chg = devm_kzalloc(&pdev->dev, sizeof(*chg), GFP_KERNEL);
+ if (!chg)
+ return -ENOMEM;
+
+ platform_set_drvdata(pdev, chg);
+ chg->dev = &pdev->dev;
+ chg->max77693 = max77693;
+
+ ret = max77693_dt_init(&pdev->dev, chg);
+ if (ret)
+ return ret;
+
+ ret = max77693_reg_init(chg);
+ if (ret)
+ return ret;
+
+ psy_cfg.drv_data = chg;
+
+ ret = device_create_file(&pdev->dev, &dev_attr_fast_charge_timer);
+ if (ret) {
+ dev_err(&pdev->dev, "failed: create fast charge timer sysfs entry\n");
+ goto err;
+ }
+
+ ret = device_create_file(&pdev->dev,
+ &dev_attr_top_off_threshold_current);
+ if (ret) {
+ dev_err(&pdev->dev, "failed: create top off current sysfs entry\n");
+ goto err;
+ }
+
+ ret = device_create_file(&pdev->dev, &dev_attr_top_off_timer);
+ if (ret) {
+ dev_err(&pdev->dev, "failed: create top off timer sysfs entry\n");
+ goto err;
+ }
+
+ chg->charger = power_supply_register(&pdev->dev,
+ &max77693_charger_desc,
+ &psy_cfg);
+ if (IS_ERR(chg->charger)) {
+ dev_err(&pdev->dev, "failed: power supply register\n");
+ ret = PTR_ERR(chg->charger);
+ goto err;
+ }
+
+ return 0;
+
+err:
+ device_remove_file(&pdev->dev, &dev_attr_top_off_timer);
+ device_remove_file(&pdev->dev, &dev_attr_top_off_threshold_current);
+ device_remove_file(&pdev->dev, &dev_attr_fast_charge_timer);
+
+ return ret;
+}
+
+static int max77693_charger_remove(struct platform_device *pdev)
+{
+ struct max77693_charger *chg = platform_get_drvdata(pdev);
+
+ device_remove_file(&pdev->dev, &dev_attr_top_off_timer);
+ device_remove_file(&pdev->dev, &dev_attr_top_off_threshold_current);
+ device_remove_file(&pdev->dev, &dev_attr_fast_charge_timer);
+
+ power_supply_unregister(chg->charger);
+
+ return 0;
+}
+
+static const struct platform_device_id max77693_charger_id[] = {
+ { "max77693-charger", 0, },
+ { }
+};
+MODULE_DEVICE_TABLE(platform, max77693_charger_id);
+
+static struct platform_driver max77693_charger_driver = {
+ .driver = {
+ .name = "max77693-charger",
+ },
+ .probe = max77693_charger_probe,
+ .remove = max77693_charger_remove,
+ .id_table = max77693_charger_id,
+};
+module_platform_driver(max77693_charger_driver);
+
+MODULE_AUTHOR("Krzysztof Kozlowski <krzk@kernel.org>");
+MODULE_DESCRIPTION("Maxim 77693 charger driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/power/supply/max8903_charger.c b/drivers/power/supply/max8903_charger.c
new file mode 100644
index 000000000..0bd39b0cc
--- /dev/null
+++ b/drivers/power/supply/max8903_charger.c
@@ -0,0 +1,445 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * max8903_charger.c - Maxim 8903 USB/Adapter Charger Driver
+ *
+ * Copyright (C) 2011 Samsung Electronics
+ * MyungJoo Ham <myungjoo.ham@samsung.com>
+ */
+
+#include <linux/gpio.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/of_gpio.h>
+#include <linux/slab.h>
+#include <linux/power_supply.h>
+#include <linux/platform_device.h>
+#include <linux/power/max8903_charger.h>
+
+struct max8903_data {
+ struct max8903_pdata *pdata;
+ struct device *dev;
+ struct power_supply *psy;
+ struct power_supply_desc psy_desc;
+ bool fault;
+ bool usb_in;
+ bool ta_in;
+};
+
+static enum power_supply_property max8903_charger_props[] = {
+ POWER_SUPPLY_PROP_STATUS, /* Charger status output */
+ POWER_SUPPLY_PROP_ONLINE, /* External power source */
+ POWER_SUPPLY_PROP_HEALTH, /* Fault or OK */
+};
+
+static int max8903_get_property(struct power_supply *psy,
+ enum power_supply_property psp,
+ union power_supply_propval *val)
+{
+ struct max8903_data *data = power_supply_get_drvdata(psy);
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_STATUS:
+ val->intval = POWER_SUPPLY_STATUS_UNKNOWN;
+ if (gpio_is_valid(data->pdata->chg)) {
+ if (gpio_get_value(data->pdata->chg) == 0)
+ val->intval = POWER_SUPPLY_STATUS_CHARGING;
+ else if (data->usb_in || data->ta_in)
+ val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING;
+ else
+ val->intval = POWER_SUPPLY_STATUS_DISCHARGING;
+ }
+ break;
+ case POWER_SUPPLY_PROP_ONLINE:
+ val->intval = 0;
+ if (data->usb_in || data->ta_in)
+ val->intval = 1;
+ break;
+ case POWER_SUPPLY_PROP_HEALTH:
+ val->intval = POWER_SUPPLY_HEALTH_GOOD;
+ if (data->fault)
+ val->intval = POWER_SUPPLY_HEALTH_UNSPEC_FAILURE;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static irqreturn_t max8903_dcin(int irq, void *_data)
+{
+ struct max8903_data *data = _data;
+ struct max8903_pdata *pdata = data->pdata;
+ bool ta_in;
+ enum power_supply_type old_type;
+
+ ta_in = gpio_get_value(pdata->dok) ? false : true;
+
+ if (ta_in == data->ta_in)
+ return IRQ_HANDLED;
+
+ data->ta_in = ta_in;
+
+ /* Set Current-Limit-Mode 1:DC 0:USB */
+ if (gpio_is_valid(pdata->dcm))
+ gpio_set_value(pdata->dcm, ta_in ? 1 : 0);
+
+ /* Charger Enable / Disable (cen is negated) */
+ if (gpio_is_valid(pdata->cen))
+ gpio_set_value(pdata->cen, ta_in ? 0 :
+ (data->usb_in ? 0 : 1));
+
+ dev_dbg(data->dev, "TA(DC-IN) Charger %s.\n", ta_in ?
+ "Connected" : "Disconnected");
+
+ old_type = data->psy_desc.type;
+
+ if (data->ta_in)
+ data->psy_desc.type = POWER_SUPPLY_TYPE_MAINS;
+ else if (data->usb_in)
+ data->psy_desc.type = POWER_SUPPLY_TYPE_USB;
+ else
+ data->psy_desc.type = POWER_SUPPLY_TYPE_BATTERY;
+
+ if (old_type != data->psy_desc.type)
+ power_supply_changed(data->psy);
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t max8903_usbin(int irq, void *_data)
+{
+ struct max8903_data *data = _data;
+ struct max8903_pdata *pdata = data->pdata;
+ bool usb_in;
+ enum power_supply_type old_type;
+
+ usb_in = gpio_get_value(pdata->uok) ? false : true;
+
+ if (usb_in == data->usb_in)
+ return IRQ_HANDLED;
+
+ data->usb_in = usb_in;
+
+ /* Do not touch Current-Limit-Mode */
+
+ /* Charger Enable / Disable (cen is negated) */
+ if (gpio_is_valid(pdata->cen))
+ gpio_set_value(pdata->cen, usb_in ? 0 :
+ (data->ta_in ? 0 : 1));
+
+ dev_dbg(data->dev, "USB Charger %s.\n", usb_in ?
+ "Connected" : "Disconnected");
+
+ old_type = data->psy_desc.type;
+
+ if (data->ta_in)
+ data->psy_desc.type = POWER_SUPPLY_TYPE_MAINS;
+ else if (data->usb_in)
+ data->psy_desc.type = POWER_SUPPLY_TYPE_USB;
+ else
+ data->psy_desc.type = POWER_SUPPLY_TYPE_BATTERY;
+
+ if (old_type != data->psy_desc.type)
+ power_supply_changed(data->psy);
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t max8903_fault(int irq, void *_data)
+{
+ struct max8903_data *data = _data;
+ struct max8903_pdata *pdata = data->pdata;
+ bool fault;
+
+ fault = gpio_get_value(pdata->flt) ? false : true;
+
+ if (fault == data->fault)
+ return IRQ_HANDLED;
+
+ data->fault = fault;
+
+ if (fault)
+ dev_err(data->dev, "Charger suffers a fault and stops.\n");
+ else
+ dev_err(data->dev, "Charger recovered from a fault.\n");
+
+ return IRQ_HANDLED;
+}
+
+static struct max8903_pdata *max8903_parse_dt_data(struct device *dev)
+{
+ struct device_node *np = dev->of_node;
+ struct max8903_pdata *pdata = NULL;
+
+ if (!np)
+ return NULL;
+
+ pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
+ if (!pdata)
+ return NULL;
+
+ pdata->dc_valid = false;
+ pdata->usb_valid = false;
+
+ pdata->cen = of_get_named_gpio(np, "cen-gpios", 0);
+ if (!gpio_is_valid(pdata->cen))
+ pdata->cen = -EINVAL;
+
+ pdata->chg = of_get_named_gpio(np, "chg-gpios", 0);
+ if (!gpio_is_valid(pdata->chg))
+ pdata->chg = -EINVAL;
+
+ pdata->flt = of_get_named_gpio(np, "flt-gpios", 0);
+ if (!gpio_is_valid(pdata->flt))
+ pdata->flt = -EINVAL;
+
+ pdata->usus = of_get_named_gpio(np, "usus-gpios", 0);
+ if (!gpio_is_valid(pdata->usus))
+ pdata->usus = -EINVAL;
+
+ pdata->dcm = of_get_named_gpio(np, "dcm-gpios", 0);
+ if (!gpio_is_valid(pdata->dcm))
+ pdata->dcm = -EINVAL;
+
+ pdata->dok = of_get_named_gpio(np, "dok-gpios", 0);
+ if (!gpio_is_valid(pdata->dok))
+ pdata->dok = -EINVAL;
+ else
+ pdata->dc_valid = true;
+
+ pdata->uok = of_get_named_gpio(np, "uok-gpios", 0);
+ if (!gpio_is_valid(pdata->uok))
+ pdata->uok = -EINVAL;
+ else
+ pdata->usb_valid = true;
+
+ return pdata;
+}
+
+static int max8903_setup_gpios(struct platform_device *pdev)
+{
+ struct max8903_data *data = platform_get_drvdata(pdev);
+ struct device *dev = &pdev->dev;
+ struct max8903_pdata *pdata = pdev->dev.platform_data;
+ int ret = 0;
+ int gpio;
+ int ta_in = 0;
+ int usb_in = 0;
+
+ if (pdata->dc_valid) {
+ if (gpio_is_valid(pdata->dok)) {
+ ret = devm_gpio_request(dev, pdata->dok,
+ data->psy_desc.name);
+ if (ret) {
+ dev_err(dev,
+ "Failed GPIO request for dok: %d err %d\n",
+ pdata->dok, ret);
+ return ret;
+ }
+
+ gpio = pdata->dok; /* PULL_UPed Interrupt */
+ ta_in = gpio_get_value(gpio) ? 0 : 1;
+ } else {
+ dev_err(dev, "When DC is wired, DOK should be wired as well.\n");
+ return -EINVAL;
+ }
+ }
+
+ if (gpio_is_valid(pdata->dcm)) {
+ ret = devm_gpio_request(dev, pdata->dcm, data->psy_desc.name);
+ if (ret) {
+ dev_err(dev,
+ "Failed GPIO request for dcm: %d err %d\n",
+ pdata->dcm, ret);
+ return ret;
+ }
+
+ gpio = pdata->dcm; /* Output */
+ gpio_set_value(gpio, ta_in);
+ }
+
+ if (pdata->usb_valid) {
+ if (gpio_is_valid(pdata->uok)) {
+ ret = devm_gpio_request(dev, pdata->uok,
+ data->psy_desc.name);
+ if (ret) {
+ dev_err(dev,
+ "Failed GPIO request for uok: %d err %d\n",
+ pdata->uok, ret);
+ return ret;
+ }
+
+ gpio = pdata->uok;
+ usb_in = gpio_get_value(gpio) ? 0 : 1;
+ } else {
+ dev_err(dev, "When USB is wired, UOK should be wired."
+ "as well.\n");
+ return -EINVAL;
+ }
+ }
+
+ if (gpio_is_valid(pdata->cen)) {
+ ret = devm_gpio_request(dev, pdata->cen, data->psy_desc.name);
+ if (ret) {
+ dev_err(dev,
+ "Failed GPIO request for cen: %d err %d\n",
+ pdata->cen, ret);
+ return ret;
+ }
+
+ gpio_set_value(pdata->cen, (ta_in || usb_in) ? 0 : 1);
+ }
+
+ if (gpio_is_valid(pdata->chg)) {
+ ret = devm_gpio_request(dev, pdata->chg, data->psy_desc.name);
+ if (ret) {
+ dev_err(dev,
+ "Failed GPIO request for chg: %d err %d\n",
+ pdata->chg, ret);
+ return ret;
+ }
+ }
+
+ if (gpio_is_valid(pdata->flt)) {
+ ret = devm_gpio_request(dev, pdata->flt, data->psy_desc.name);
+ if (ret) {
+ dev_err(dev,
+ "Failed GPIO request for flt: %d err %d\n",
+ pdata->flt, ret);
+ return ret;
+ }
+ }
+
+ if (gpio_is_valid(pdata->usus)) {
+ ret = devm_gpio_request(dev, pdata->usus, data->psy_desc.name);
+ if (ret) {
+ dev_err(dev,
+ "Failed GPIO request for usus: %d err %d\n",
+ pdata->usus, ret);
+ return ret;
+ }
+ }
+
+ data->fault = false;
+ data->ta_in = ta_in;
+ data->usb_in = usb_in;
+
+ return 0;
+}
+
+static int max8903_probe(struct platform_device *pdev)
+{
+ struct max8903_data *data;
+ struct device *dev = &pdev->dev;
+ struct max8903_pdata *pdata = pdev->dev.platform_data;
+ struct power_supply_config psy_cfg = {};
+ int ret = 0;
+
+ data = devm_kzalloc(dev, sizeof(struct max8903_data), GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
+
+ if (IS_ENABLED(CONFIG_OF) && !pdata && dev->of_node)
+ pdata = max8903_parse_dt_data(dev);
+
+ if (!pdata) {
+ dev_err(dev, "No platform data.\n");
+ return -EINVAL;
+ }
+
+ pdev->dev.platform_data = pdata;
+ data->pdata = pdata;
+ data->dev = dev;
+ platform_set_drvdata(pdev, data);
+
+ if (pdata->dc_valid == false && pdata->usb_valid == false) {
+ dev_err(dev, "No valid power sources.\n");
+ return -EINVAL;
+ }
+
+ ret = max8903_setup_gpios(pdev);
+ if (ret)
+ return ret;
+
+ data->psy_desc.name = "max8903_charger";
+ data->psy_desc.type = (data->ta_in) ? POWER_SUPPLY_TYPE_MAINS :
+ ((data->usb_in) ? POWER_SUPPLY_TYPE_USB :
+ POWER_SUPPLY_TYPE_BATTERY);
+ data->psy_desc.get_property = max8903_get_property;
+ data->psy_desc.properties = max8903_charger_props;
+ data->psy_desc.num_properties = ARRAY_SIZE(max8903_charger_props);
+
+ psy_cfg.of_node = dev->of_node;
+ psy_cfg.drv_data = data;
+
+ data->psy = devm_power_supply_register(dev, &data->psy_desc, &psy_cfg);
+ if (IS_ERR(data->psy)) {
+ dev_err(dev, "failed: power supply register.\n");
+ return PTR_ERR(data->psy);
+ }
+
+ if (pdata->dc_valid) {
+ ret = devm_request_threaded_irq(dev, gpio_to_irq(pdata->dok),
+ NULL, max8903_dcin,
+ IRQF_TRIGGER_FALLING |
+ IRQF_TRIGGER_RISING | IRQF_ONESHOT,
+ "MAX8903 DC IN", data);
+ if (ret) {
+ dev_err(dev, "Cannot request irq %d for DC (%d)\n",
+ gpio_to_irq(pdata->dok), ret);
+ return ret;
+ }
+ }
+
+ if (pdata->usb_valid) {
+ ret = devm_request_threaded_irq(dev, gpio_to_irq(pdata->uok),
+ NULL, max8903_usbin,
+ IRQF_TRIGGER_FALLING |
+ IRQF_TRIGGER_RISING | IRQF_ONESHOT,
+ "MAX8903 USB IN", data);
+ if (ret) {
+ dev_err(dev, "Cannot request irq %d for USB (%d)\n",
+ gpio_to_irq(pdata->uok), ret);
+ return ret;
+ }
+ }
+
+ if (gpio_is_valid(pdata->flt)) {
+ ret = devm_request_threaded_irq(dev, gpio_to_irq(pdata->flt),
+ NULL, max8903_fault,
+ IRQF_TRIGGER_FALLING |
+ IRQF_TRIGGER_RISING | IRQF_ONESHOT,
+ "MAX8903 Fault", data);
+ if (ret) {
+ dev_err(dev, "Cannot request irq %d for Fault (%d)\n",
+ gpio_to_irq(pdata->flt), ret);
+ return ret;
+ }
+ }
+
+ return 0;
+}
+
+static const struct of_device_id max8903_match_ids[] = {
+ { .compatible = "maxim,max8903", },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, max8903_match_ids);
+
+static struct platform_driver max8903_driver = {
+ .probe = max8903_probe,
+ .driver = {
+ .name = "max8903-charger",
+ .of_match_table = max8903_match_ids
+ },
+};
+
+module_platform_driver(max8903_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("MAX8903 Charger Driver");
+MODULE_AUTHOR("MyungJoo Ham <myungjoo.ham@samsung.com>");
+MODULE_ALIAS("platform:max8903-charger");
diff --git a/drivers/power/supply/max8925_power.c b/drivers/power/supply/max8925_power.c
new file mode 100644
index 000000000..8878f9131
--- /dev/null
+++ b/drivers/power/supply/max8925_power.c
@@ -0,0 +1,594 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Battery driver for Maxim MAX8925
+ *
+ * Copyright (c) 2009-2010 Marvell International Ltd.
+ * Haojian Zhuang <haojian.zhuang@marvell.com>
+ */
+
+#include <linux/module.h>
+#include <linux/err.h>
+#include <linux/slab.h>
+#include <linux/of.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/power_supply.h>
+#include <linux/mfd/max8925.h>
+
+/* registers in GPM */
+#define MAX8925_OUT5VEN 0x54
+#define MAX8925_OUT3VEN 0x58
+#define MAX8925_CHG_CNTL1 0x7c
+
+/* bits definition */
+#define MAX8925_CHG_STAT_VSYSLOW (1 << 0)
+#define MAX8925_CHG_STAT_MODE_MASK (3 << 2)
+#define MAX8925_CHG_STAT_EN_MASK (1 << 4)
+#define MAX8925_CHG_MBDET (1 << 1)
+#define MAX8925_CHG_AC_RANGE_MASK (3 << 6)
+
+/* registers in ADC */
+#define MAX8925_ADC_RES_CNFG1 0x06
+#define MAX8925_ADC_AVG_CNFG1 0x07
+#define MAX8925_ADC_ACQ_CNFG1 0x08
+#define MAX8925_ADC_ACQ_CNFG2 0x09
+/* 2 bytes registers in below. MSB is 1st, LSB is 2nd. */
+#define MAX8925_ADC_AUX2 0x62
+#define MAX8925_ADC_VCHG 0x64
+#define MAX8925_ADC_VBBATT 0x66
+#define MAX8925_ADC_VMBATT 0x68
+#define MAX8925_ADC_ISNS 0x6a
+#define MAX8925_ADC_THM 0x6c
+#define MAX8925_ADC_TDIE 0x6e
+#define MAX8925_CMD_AUX2 0xc8
+#define MAX8925_CMD_VCHG 0xd0
+#define MAX8925_CMD_VBBATT 0xd8
+#define MAX8925_CMD_VMBATT 0xe0
+#define MAX8925_CMD_ISNS 0xe8
+#define MAX8925_CMD_THM 0xf0
+#define MAX8925_CMD_TDIE 0xf8
+
+enum {
+ MEASURE_AUX2,
+ MEASURE_VCHG,
+ MEASURE_VBBATT,
+ MEASURE_VMBATT,
+ MEASURE_ISNS,
+ MEASURE_THM,
+ MEASURE_TDIE,
+ MEASURE_MAX,
+};
+
+struct max8925_power_info {
+ struct max8925_chip *chip;
+ struct i2c_client *gpm;
+ struct i2c_client *adc;
+
+ struct power_supply *ac;
+ struct power_supply *usb;
+ struct power_supply *battery;
+ int irq_base;
+ unsigned ac_online:1;
+ unsigned usb_online:1;
+ unsigned bat_online:1;
+ unsigned chg_mode:2;
+ unsigned batt_detect:1; /* detecing MB by ID pin */
+ unsigned topoff_threshold:2;
+ unsigned fast_charge:3;
+ unsigned no_temp_support:1;
+ unsigned no_insert_detect:1;
+
+ int (*set_charger) (int);
+};
+
+static int __set_charger(struct max8925_power_info *info, int enable)
+{
+ struct max8925_chip *chip = info->chip;
+ if (enable) {
+ /* enable charger in platform */
+ if (info->set_charger)
+ info->set_charger(1);
+ /* enable charger */
+ max8925_set_bits(info->gpm, MAX8925_CHG_CNTL1, 1 << 7, 0);
+ } else {
+ /* disable charge */
+ max8925_set_bits(info->gpm, MAX8925_CHG_CNTL1, 1 << 7, 1 << 7);
+ if (info->set_charger)
+ info->set_charger(0);
+ }
+ dev_dbg(chip->dev, "%s\n", (enable) ? "Enable charger"
+ : "Disable charger");
+ return 0;
+}
+
+static irqreturn_t max8925_charger_handler(int irq, void *data)
+{
+ struct max8925_power_info *info = (struct max8925_power_info *)data;
+ struct max8925_chip *chip = info->chip;
+
+ switch (irq - chip->irq_base) {
+ case MAX8925_IRQ_VCHG_DC_R:
+ info->ac_online = 1;
+ __set_charger(info, 1);
+ dev_dbg(chip->dev, "Adapter inserted\n");
+ break;
+ case MAX8925_IRQ_VCHG_DC_F:
+ info->ac_online = 0;
+ __set_charger(info, 0);
+ dev_dbg(chip->dev, "Adapter removed\n");
+ break;
+ case MAX8925_IRQ_VCHG_THM_OK_F:
+ /* Battery is not ready yet */
+ dev_dbg(chip->dev, "Battery temperature is out of range\n");
+ fallthrough;
+ case MAX8925_IRQ_VCHG_DC_OVP:
+ dev_dbg(chip->dev, "Error detection\n");
+ __set_charger(info, 0);
+ break;
+ case MAX8925_IRQ_VCHG_THM_OK_R:
+ /* Battery is ready now */
+ dev_dbg(chip->dev, "Battery temperature is in range\n");
+ break;
+ case MAX8925_IRQ_VCHG_SYSLOW_R:
+ /* VSYS is low */
+ dev_info(chip->dev, "Sys power is too low\n");
+ break;
+ case MAX8925_IRQ_VCHG_SYSLOW_F:
+ dev_dbg(chip->dev, "Sys power is above low threshold\n");
+ break;
+ case MAX8925_IRQ_VCHG_DONE:
+ __set_charger(info, 0);
+ dev_dbg(chip->dev, "Charging is done\n");
+ break;
+ case MAX8925_IRQ_VCHG_TOPOFF:
+ dev_dbg(chip->dev, "Charging in top-off mode\n");
+ break;
+ case MAX8925_IRQ_VCHG_TMR_FAULT:
+ __set_charger(info, 0);
+ dev_dbg(chip->dev, "Safe timer is expired\n");
+ break;
+ case MAX8925_IRQ_VCHG_RST:
+ __set_charger(info, 0);
+ dev_dbg(chip->dev, "Charger is reset\n");
+ break;
+ }
+ return IRQ_HANDLED;
+}
+
+static int start_measure(struct max8925_power_info *info, int type)
+{
+ unsigned char buf[2] = {0, 0};
+ int meas_cmd;
+ int meas_reg = 0, ret;
+
+ switch (type) {
+ case MEASURE_VCHG:
+ meas_cmd = MAX8925_CMD_VCHG;
+ meas_reg = MAX8925_ADC_VCHG;
+ break;
+ case MEASURE_VBBATT:
+ meas_cmd = MAX8925_CMD_VBBATT;
+ meas_reg = MAX8925_ADC_VBBATT;
+ break;
+ case MEASURE_VMBATT:
+ meas_cmd = MAX8925_CMD_VMBATT;
+ meas_reg = MAX8925_ADC_VMBATT;
+ break;
+ case MEASURE_ISNS:
+ meas_cmd = MAX8925_CMD_ISNS;
+ meas_reg = MAX8925_ADC_ISNS;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ max8925_reg_write(info->adc, meas_cmd, 0);
+ max8925_bulk_read(info->adc, meas_reg, 2, buf);
+ ret = ((buf[0]<<8) | buf[1]) >> 4;
+
+ return ret;
+}
+
+static int max8925_ac_get_prop(struct power_supply *psy,
+ enum power_supply_property psp,
+ union power_supply_propval *val)
+{
+ struct max8925_power_info *info = dev_get_drvdata(psy->dev.parent);
+ int ret = 0;
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_ONLINE:
+ val->intval = info->ac_online;
+ break;
+ case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+ if (info->ac_online) {
+ ret = start_measure(info, MEASURE_VCHG);
+ if (ret >= 0) {
+ val->intval = ret * 2000; /* unit is uV */
+ goto out;
+ }
+ }
+ ret = -ENODATA;
+ break;
+ default:
+ ret = -ENODEV;
+ break;
+ }
+out:
+ return ret;
+}
+
+static enum power_supply_property max8925_ac_props[] = {
+ POWER_SUPPLY_PROP_ONLINE,
+ POWER_SUPPLY_PROP_VOLTAGE_NOW,
+};
+
+static int max8925_usb_get_prop(struct power_supply *psy,
+ enum power_supply_property psp,
+ union power_supply_propval *val)
+{
+ struct max8925_power_info *info = dev_get_drvdata(psy->dev.parent);
+ int ret = 0;
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_ONLINE:
+ val->intval = info->usb_online;
+ break;
+ case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+ if (info->usb_online) {
+ ret = start_measure(info, MEASURE_VCHG);
+ if (ret >= 0) {
+ val->intval = ret * 2000; /* unit is uV */
+ goto out;
+ }
+ }
+ ret = -ENODATA;
+ break;
+ default:
+ ret = -ENODEV;
+ break;
+ }
+out:
+ return ret;
+}
+
+static enum power_supply_property max8925_usb_props[] = {
+ POWER_SUPPLY_PROP_ONLINE,
+ POWER_SUPPLY_PROP_VOLTAGE_NOW,
+};
+
+static int max8925_bat_get_prop(struct power_supply *psy,
+ enum power_supply_property psp,
+ union power_supply_propval *val)
+{
+ struct max8925_power_info *info = dev_get_drvdata(psy->dev.parent);
+ int ret = 0;
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_ONLINE:
+ val->intval = info->bat_online;
+ break;
+ case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+ if (info->bat_online) {
+ ret = start_measure(info, MEASURE_VMBATT);
+ if (ret >= 0) {
+ val->intval = ret * 2000; /* unit is uV */
+ ret = 0;
+ break;
+ }
+ }
+ ret = -ENODATA;
+ break;
+ case POWER_SUPPLY_PROP_CURRENT_NOW:
+ if (info->bat_online) {
+ ret = start_measure(info, MEASURE_ISNS);
+ if (ret >= 0) {
+ /* assume r_sns is 0.02 */
+ ret = ((ret * 6250) - 3125) /* uA */;
+ val->intval = 0;
+ if (ret > 0)
+ val->intval = ret; /* unit is mA */
+ ret = 0;
+ break;
+ }
+ }
+ ret = -ENODATA;
+ break;
+ case POWER_SUPPLY_PROP_CHARGE_TYPE:
+ if (!info->bat_online) {
+ ret = -ENODATA;
+ break;
+ }
+ ret = max8925_reg_read(info->gpm, MAX8925_CHG_STATUS);
+ ret = (ret & MAX8925_CHG_STAT_MODE_MASK) >> 2;
+ switch (ret) {
+ case 1:
+ val->intval = POWER_SUPPLY_CHARGE_TYPE_FAST;
+ break;
+ case 0:
+ case 2:
+ val->intval = POWER_SUPPLY_CHARGE_TYPE_TRICKLE;
+ break;
+ case 3:
+ val->intval = POWER_SUPPLY_CHARGE_TYPE_NONE;
+ break;
+ }
+ ret = 0;
+ break;
+ case POWER_SUPPLY_PROP_STATUS:
+ if (!info->bat_online) {
+ ret = -ENODATA;
+ break;
+ }
+ ret = max8925_reg_read(info->gpm, MAX8925_CHG_STATUS);
+ if (info->usb_online || info->ac_online) {
+ val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING;
+ if (ret & MAX8925_CHG_STAT_EN_MASK)
+ val->intval = POWER_SUPPLY_STATUS_CHARGING;
+ } else
+ val->intval = POWER_SUPPLY_STATUS_DISCHARGING;
+ ret = 0;
+ break;
+ default:
+ ret = -ENODEV;
+ break;
+ }
+ return ret;
+}
+
+static enum power_supply_property max8925_battery_props[] = {
+ POWER_SUPPLY_PROP_ONLINE,
+ POWER_SUPPLY_PROP_VOLTAGE_NOW,
+ POWER_SUPPLY_PROP_CURRENT_NOW,
+ POWER_SUPPLY_PROP_CHARGE_TYPE,
+ POWER_SUPPLY_PROP_STATUS,
+};
+
+static const struct power_supply_desc ac_desc = {
+ .name = "max8925-ac",
+ .type = POWER_SUPPLY_TYPE_MAINS,
+ .properties = max8925_ac_props,
+ .num_properties = ARRAY_SIZE(max8925_ac_props),
+ .get_property = max8925_ac_get_prop,
+};
+
+static const struct power_supply_desc usb_desc = {
+ .name = "max8925-usb",
+ .type = POWER_SUPPLY_TYPE_USB,
+ .properties = max8925_usb_props,
+ .num_properties = ARRAY_SIZE(max8925_usb_props),
+ .get_property = max8925_usb_get_prop,
+};
+
+static const struct power_supply_desc battery_desc = {
+ .name = "max8925-battery",
+ .type = POWER_SUPPLY_TYPE_BATTERY,
+ .properties = max8925_battery_props,
+ .num_properties = ARRAY_SIZE(max8925_battery_props),
+ .get_property = max8925_bat_get_prop,
+};
+
+#define REQUEST_IRQ(_irq, _name) \
+do { \
+ ret = request_threaded_irq(chip->irq_base + _irq, NULL, \
+ max8925_charger_handler, \
+ IRQF_ONESHOT, _name, info); \
+ if (ret) \
+ dev_err(chip->dev, "Failed to request IRQ #%d: %d\n", \
+ _irq, ret); \
+} while (0)
+
+static int max8925_init_charger(struct max8925_chip *chip,
+ struct max8925_power_info *info)
+{
+ int ret;
+
+ REQUEST_IRQ(MAX8925_IRQ_VCHG_DC_OVP, "ac-ovp");
+ if (!info->no_insert_detect) {
+ REQUEST_IRQ(MAX8925_IRQ_VCHG_DC_F, "ac-remove");
+ REQUEST_IRQ(MAX8925_IRQ_VCHG_DC_R, "ac-insert");
+ }
+ if (!info->no_temp_support) {
+ REQUEST_IRQ(MAX8925_IRQ_VCHG_THM_OK_R, "batt-temp-in-range");
+ REQUEST_IRQ(MAX8925_IRQ_VCHG_THM_OK_F, "batt-temp-out-range");
+ }
+ REQUEST_IRQ(MAX8925_IRQ_VCHG_SYSLOW_F, "vsys-high");
+ REQUEST_IRQ(MAX8925_IRQ_VCHG_SYSLOW_R, "vsys-low");
+ REQUEST_IRQ(MAX8925_IRQ_VCHG_RST, "charger-reset");
+ REQUEST_IRQ(MAX8925_IRQ_VCHG_DONE, "charger-done");
+ REQUEST_IRQ(MAX8925_IRQ_VCHG_TOPOFF, "charger-topoff");
+ REQUEST_IRQ(MAX8925_IRQ_VCHG_TMR_FAULT, "charger-timer-expire");
+
+ info->usb_online = 0;
+ info->bat_online = 0;
+
+ /* check for power - can miss interrupt at boot time */
+ if (start_measure(info, MEASURE_VCHG) * 2000 > 500000)
+ info->ac_online = 1;
+ else
+ info->ac_online = 0;
+
+ ret = max8925_reg_read(info->gpm, MAX8925_CHG_STATUS);
+ if (ret >= 0) {
+ /*
+ * If battery detection is enabled, ID pin of battery is
+ * connected to MBDET pin of MAX8925. It could be used to
+ * detect battery presence.
+ * Otherwise, we have to assume that battery is always on.
+ */
+ if (info->batt_detect)
+ info->bat_online = (ret & MAX8925_CHG_MBDET) ? 0 : 1;
+ else
+ info->bat_online = 1;
+ if (ret & MAX8925_CHG_AC_RANGE_MASK)
+ info->ac_online = 1;
+ else
+ info->ac_online = 0;
+ }
+ /* disable charge */
+ max8925_set_bits(info->gpm, MAX8925_CHG_CNTL1, 1 << 7, 1 << 7);
+ /* set charging current in charge topoff mode */
+ max8925_set_bits(info->gpm, MAX8925_CHG_CNTL1, 3 << 5,
+ info->topoff_threshold << 5);
+ /* set charing current in fast charge mode */
+ max8925_set_bits(info->gpm, MAX8925_CHG_CNTL1, 7, info->fast_charge);
+
+ return 0;
+}
+
+static int max8925_deinit_charger(struct max8925_power_info *info)
+{
+ struct max8925_chip *chip = info->chip;
+ int irq;
+
+ irq = chip->irq_base + MAX8925_IRQ_VCHG_DC_OVP;
+ for (; irq <= chip->irq_base + MAX8925_IRQ_VCHG_TMR_FAULT; irq++)
+ free_irq(irq, info);
+
+ return 0;
+}
+
+#ifdef CONFIG_OF
+static struct max8925_power_pdata *
+max8925_power_dt_init(struct platform_device *pdev)
+{
+ struct device_node *nproot = pdev->dev.parent->of_node;
+ struct device_node *np;
+ int batt_detect;
+ int topoff_threshold;
+ int fast_charge;
+ int no_temp_support;
+ int no_insert_detect;
+ struct max8925_power_pdata *pdata;
+
+ if (!nproot)
+ return pdev->dev.platform_data;
+
+ np = of_get_child_by_name(nproot, "charger");
+ if (!np) {
+ dev_err(&pdev->dev, "failed to find charger node\n");
+ return NULL;
+ }
+
+ pdata = devm_kzalloc(&pdev->dev,
+ sizeof(struct max8925_power_pdata),
+ GFP_KERNEL);
+ if (!pdata)
+ goto ret;
+
+ of_property_read_u32(np, "topoff-threshold", &topoff_threshold);
+ of_property_read_u32(np, "batt-detect", &batt_detect);
+ of_property_read_u32(np, "fast-charge", &fast_charge);
+ of_property_read_u32(np, "no-insert-detect", &no_insert_detect);
+ of_property_read_u32(np, "no-temp-support", &no_temp_support);
+
+ pdata->batt_detect = batt_detect;
+ pdata->fast_charge = fast_charge;
+ pdata->topoff_threshold = topoff_threshold;
+ pdata->no_insert_detect = no_insert_detect;
+ pdata->no_temp_support = no_temp_support;
+
+ret:
+ of_node_put(np);
+ return pdata;
+}
+#else
+static struct max8925_power_pdata *
+max8925_power_dt_init(struct platform_device *pdev)
+{
+ return pdev->dev.platform_data;
+}
+#endif
+
+static int max8925_power_probe(struct platform_device *pdev)
+{
+ struct max8925_chip *chip = dev_get_drvdata(pdev->dev.parent);
+ struct power_supply_config psy_cfg = {}; /* Only for ac and usb */
+ struct max8925_power_pdata *pdata = NULL;
+ struct max8925_power_info *info;
+ int ret;
+
+ pdata = max8925_power_dt_init(pdev);
+ if (!pdata) {
+ dev_err(&pdev->dev, "platform data isn't assigned to "
+ "power supply\n");
+ return -EINVAL;
+ }
+
+ info = devm_kzalloc(&pdev->dev, sizeof(struct max8925_power_info),
+ GFP_KERNEL);
+ if (!info)
+ return -ENOMEM;
+ info->chip = chip;
+ info->gpm = chip->i2c;
+ info->adc = chip->adc;
+ platform_set_drvdata(pdev, info);
+
+ psy_cfg.supplied_to = pdata->supplied_to;
+ psy_cfg.num_supplicants = pdata->num_supplicants;
+
+ info->ac = power_supply_register(&pdev->dev, &ac_desc, &psy_cfg);
+ if (IS_ERR(info->ac)) {
+ ret = PTR_ERR(info->ac);
+ goto out;
+ }
+ info->ac->dev.parent = &pdev->dev;
+
+ info->usb = power_supply_register(&pdev->dev, &usb_desc, &psy_cfg);
+ if (IS_ERR(info->usb)) {
+ ret = PTR_ERR(info->usb);
+ goto out_unregister_ac;
+ }
+ info->usb->dev.parent = &pdev->dev;
+
+ info->battery = power_supply_register(&pdev->dev, &battery_desc, NULL);
+ if (IS_ERR(info->battery)) {
+ ret = PTR_ERR(info->battery);
+ goto out_unregister_usb;
+ }
+ info->battery->dev.parent = &pdev->dev;
+
+ info->batt_detect = pdata->batt_detect;
+ info->topoff_threshold = pdata->topoff_threshold;
+ info->fast_charge = pdata->fast_charge;
+ info->set_charger = pdata->set_charger;
+ info->no_temp_support = pdata->no_temp_support;
+ info->no_insert_detect = pdata->no_insert_detect;
+
+ max8925_init_charger(chip, info);
+ return 0;
+out_unregister_usb:
+ power_supply_unregister(info->usb);
+out_unregister_ac:
+ power_supply_unregister(info->ac);
+out:
+ return ret;
+}
+
+static int max8925_power_remove(struct platform_device *pdev)
+{
+ struct max8925_power_info *info = platform_get_drvdata(pdev);
+
+ if (info) {
+ power_supply_unregister(info->ac);
+ power_supply_unregister(info->usb);
+ power_supply_unregister(info->battery);
+ max8925_deinit_charger(info);
+ }
+ return 0;
+}
+
+static struct platform_driver max8925_power_driver = {
+ .probe = max8925_power_probe,
+ .remove = max8925_power_remove,
+ .driver = {
+ .name = "max8925-power",
+ },
+};
+
+module_platform_driver(max8925_power_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Power supply driver for MAX8925");
+MODULE_ALIAS("platform:max8925-power");
diff --git a/drivers/power/supply/max8997_charger.c b/drivers/power/supply/max8997_charger.c
new file mode 100644
index 000000000..f5e84cd47
--- /dev/null
+++ b/drivers/power/supply/max8997_charger.c
@@ -0,0 +1,186 @@
+// SPDX-License-Identifier: GPL-2.0+
+//
+// max8997_charger.c - Power supply consumer driver for the Maxim 8997/8966
+//
+// Copyright (C) 2011 Samsung Electronics
+// MyungJoo Ham <myungjoo.ham@samsung.com>
+
+#include <linux/err.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/platform_device.h>
+#include <linux/power_supply.h>
+#include <linux/mfd/max8997.h>
+#include <linux/mfd/max8997-private.h>
+
+struct charger_data {
+ struct device *dev;
+ struct max8997_dev *iodev;
+ struct power_supply *battery;
+};
+
+static enum power_supply_property max8997_battery_props[] = {
+ POWER_SUPPLY_PROP_STATUS, /* "FULL" or "NOT FULL" only. */
+ POWER_SUPPLY_PROP_PRESENT, /* the presence of battery */
+ POWER_SUPPLY_PROP_ONLINE, /* charger is active or not */
+};
+
+/* Note that the charger control is done by a current regulator "CHARGER" */
+static int max8997_battery_get_property(struct power_supply *psy,
+ enum power_supply_property psp,
+ union power_supply_propval *val)
+{
+ struct charger_data *charger = power_supply_get_drvdata(psy);
+ struct i2c_client *i2c = charger->iodev->i2c;
+ int ret;
+ u8 reg;
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_STATUS:
+ val->intval = 0;
+ ret = max8997_read_reg(i2c, MAX8997_REG_STATUS4, &reg);
+ if (ret)
+ return ret;
+ if ((reg & (1 << 0)) == 0x1)
+ val->intval = POWER_SUPPLY_STATUS_FULL;
+
+ break;
+ case POWER_SUPPLY_PROP_PRESENT:
+ val->intval = 0;
+ ret = max8997_read_reg(i2c, MAX8997_REG_STATUS4, &reg);
+ if (ret)
+ return ret;
+ if ((reg & (1 << 2)) == 0x0)
+ val->intval = 1;
+
+ break;
+ case POWER_SUPPLY_PROP_ONLINE:
+ val->intval = 0;
+ ret = max8997_read_reg(i2c, MAX8997_REG_STATUS4, &reg);
+ if (ret)
+ return ret;
+ /* DCINOK */
+ if (reg & (1 << 1))
+ val->intval = 1;
+
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static const struct power_supply_desc max8997_battery_desc = {
+ .name = "max8997_pmic",
+ .type = POWER_SUPPLY_TYPE_BATTERY,
+ .get_property = max8997_battery_get_property,
+ .properties = max8997_battery_props,
+ .num_properties = ARRAY_SIZE(max8997_battery_props),
+};
+
+static int max8997_battery_probe(struct platform_device *pdev)
+{
+ int ret = 0;
+ struct charger_data *charger;
+ struct max8997_dev *iodev = dev_get_drvdata(pdev->dev.parent);
+ struct max8997_platform_data *pdata = dev_get_platdata(iodev->dev);
+ struct power_supply_config psy_cfg = {};
+
+ if (!pdata)
+ return -EINVAL;
+
+ if (pdata->eoc_mA) {
+ int val = (pdata->eoc_mA - 50) / 10;
+ if (val < 0)
+ val = 0;
+ if (val > 0xf)
+ val = 0xf;
+
+ ret = max8997_update_reg(iodev->i2c,
+ MAX8997_REG_MBCCTRL5, val, 0xf);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "Cannot use i2c bus.\n");
+ return ret;
+ }
+ }
+
+ switch (pdata->timeout) {
+ case 5:
+ ret = max8997_update_reg(iodev->i2c, MAX8997_REG_MBCCTRL1,
+ 0x2 << 4, 0x7 << 4);
+ break;
+ case 6:
+ ret = max8997_update_reg(iodev->i2c, MAX8997_REG_MBCCTRL1,
+ 0x3 << 4, 0x7 << 4);
+ break;
+ case 7:
+ ret = max8997_update_reg(iodev->i2c, MAX8997_REG_MBCCTRL1,
+ 0x4 << 4, 0x7 << 4);
+ break;
+ case 0:
+ ret = max8997_update_reg(iodev->i2c, MAX8997_REG_MBCCTRL1,
+ 0x7 << 4, 0x7 << 4);
+ break;
+ default:
+ dev_err(&pdev->dev, "incorrect timeout value (%d)\n",
+ pdata->timeout);
+ return -EINVAL;
+ }
+ if (ret < 0) {
+ dev_err(&pdev->dev, "Cannot use i2c bus.\n");
+ return ret;
+ }
+
+ charger = devm_kzalloc(&pdev->dev, sizeof(*charger), GFP_KERNEL);
+ if (!charger)
+ return -ENOMEM;
+
+ platform_set_drvdata(pdev, charger);
+
+
+ charger->dev = &pdev->dev;
+ charger->iodev = iodev;
+
+ psy_cfg.drv_data = charger;
+
+ charger->battery = devm_power_supply_register(&pdev->dev,
+ &max8997_battery_desc,
+ &psy_cfg);
+ if (IS_ERR(charger->battery)) {
+ dev_err(&pdev->dev, "failed: power supply register\n");
+ return PTR_ERR(charger->battery);
+ }
+
+ return 0;
+}
+
+static const struct platform_device_id max8997_battery_id[] = {
+ { "max8997-battery", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(platform, max8997_battery_id);
+
+static struct platform_driver max8997_battery_driver = {
+ .driver = {
+ .name = "max8997-battery",
+ },
+ .probe = max8997_battery_probe,
+ .id_table = max8997_battery_id,
+};
+
+static int __init max8997_battery_init(void)
+{
+ return platform_driver_register(&max8997_battery_driver);
+}
+subsys_initcall(max8997_battery_init);
+
+static void __exit max8997_battery_cleanup(void)
+{
+ platform_driver_unregister(&max8997_battery_driver);
+}
+module_exit(max8997_battery_cleanup);
+
+MODULE_DESCRIPTION("MAXIM 8997/8966 battery control driver");
+MODULE_AUTHOR("MyungJoo Ham <myungjoo.ham@samsung.com>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/power/supply/max8998_charger.c b/drivers/power/supply/max8998_charger.c
new file mode 100644
index 000000000..c26023b19
--- /dev/null
+++ b/drivers/power/supply/max8998_charger.c
@@ -0,0 +1,208 @@
+// SPDX-License-Identifier: GPL-2.0+
+//
+// max8998_charger.c - Power supply consumer driver for the Maxim 8998/LP3974
+//
+// Copyright (C) 2009-2010 Samsung Electronics
+// MyungJoo Ham <myungjoo.ham@samsung.com>
+
+#include <linux/err.h>
+#include <linux/module.h>
+#include <linux/mod_devicetable.h>
+#include <linux/slab.h>
+#include <linux/platform_device.h>
+#include <linux/power_supply.h>
+#include <linux/mfd/max8998.h>
+#include <linux/mfd/max8998-private.h>
+
+struct max8998_battery_data {
+ struct device *dev;
+ struct max8998_dev *iodev;
+ struct power_supply *battery;
+};
+
+static enum power_supply_property max8998_battery_props[] = {
+ POWER_SUPPLY_PROP_PRESENT, /* the presence of battery */
+ POWER_SUPPLY_PROP_ONLINE, /* charger is active or not */
+ POWER_SUPPLY_PROP_STATUS, /* charger is charging/discharging/full */
+};
+
+/* Note that the charger control is done by a current regulator "CHARGER" */
+static int max8998_battery_get_property(struct power_supply *psy,
+ enum power_supply_property psp,
+ union power_supply_propval *val)
+{
+ struct max8998_battery_data *max8998 = power_supply_get_drvdata(psy);
+ struct i2c_client *i2c = max8998->iodev->i2c;
+ int ret;
+ u8 reg;
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_PRESENT:
+ ret = max8998_read_reg(i2c, MAX8998_REG_STATUS2, &reg);
+ if (ret)
+ return ret;
+ if (reg & (1 << 4))
+ val->intval = 0;
+ else
+ val->intval = 1;
+ break;
+ case POWER_SUPPLY_PROP_ONLINE:
+ ret = max8998_read_reg(i2c, MAX8998_REG_STATUS2, &reg);
+ if (ret)
+ return ret;
+
+ if (reg & (1 << 5))
+ val->intval = 1;
+ else
+ val->intval = 0;
+
+ break;
+ case POWER_SUPPLY_PROP_STATUS:
+ ret = max8998_read_reg(i2c, MAX8998_REG_STATUS2, &reg);
+ if (ret)
+ return ret;
+
+ if (!(reg & (1 << 5))) {
+ val->intval = POWER_SUPPLY_STATUS_DISCHARGING;
+ } else {
+ if (reg & (1 << 6))
+ val->intval = POWER_SUPPLY_STATUS_FULL;
+ else if (reg & (1 << 3))
+ val->intval = POWER_SUPPLY_STATUS_CHARGING;
+ else
+ val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING;
+ }
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static const struct power_supply_desc max8998_battery_desc = {
+ .name = "max8998_pmic",
+ .type = POWER_SUPPLY_TYPE_BATTERY,
+ .get_property = max8998_battery_get_property,
+ .properties = max8998_battery_props,
+ .num_properties = ARRAY_SIZE(max8998_battery_props),
+};
+
+static int max8998_battery_probe(struct platform_device *pdev)
+{
+ struct max8998_dev *iodev = dev_get_drvdata(pdev->dev.parent);
+ struct max8998_platform_data *pdata = iodev->pdata;
+ struct power_supply_config psy_cfg = {};
+ struct max8998_battery_data *max8998;
+ struct i2c_client *i2c;
+ int ret = 0;
+
+ if (!pdata) {
+ dev_err(pdev->dev.parent, "No platform init data supplied\n");
+ return -ENODEV;
+ }
+
+ max8998 = devm_kzalloc(&pdev->dev, sizeof(struct max8998_battery_data),
+ GFP_KERNEL);
+ if (!max8998)
+ return -ENOMEM;
+
+ max8998->dev = &pdev->dev;
+ max8998->iodev = iodev;
+ platform_set_drvdata(pdev, max8998);
+ i2c = max8998->iodev->i2c;
+
+ /* Setup "End of Charge" */
+ /* If EOC value equals 0,
+ * remain value set from bootloader or default value */
+ if (pdata->eoc >= 10 && pdata->eoc <= 45) {
+ max8998_update_reg(i2c, MAX8998_REG_CHGR1,
+ (pdata->eoc / 5 - 2) << 5, 0x7 << 5);
+ } else if (pdata->eoc == 0) {
+ dev_dbg(max8998->dev,
+ "EOC value not set: leave it unchanged.\n");
+ } else {
+ dev_err(max8998->dev, "Invalid EOC value\n");
+ return -EINVAL;
+ }
+
+ /* Setup Charge Restart Level */
+ switch (pdata->restart) {
+ case 100:
+ max8998_update_reg(i2c, MAX8998_REG_CHGR1, 0x1 << 3, 0x3 << 3);
+ break;
+ case 150:
+ max8998_update_reg(i2c, MAX8998_REG_CHGR1, 0x0 << 3, 0x3 << 3);
+ break;
+ case 200:
+ max8998_update_reg(i2c, MAX8998_REG_CHGR1, 0x2 << 3, 0x3 << 3);
+ break;
+ case -1:
+ max8998_update_reg(i2c, MAX8998_REG_CHGR1, 0x3 << 3, 0x3 << 3);
+ break;
+ case 0:
+ dev_dbg(max8998->dev,
+ "Restart Level not set: leave it unchanged.\n");
+ break;
+ default:
+ dev_err(max8998->dev, "Invalid Restart Level\n");
+ return -EINVAL;
+ }
+
+ /* Setup Charge Full Timeout */
+ switch (pdata->timeout) {
+ case 5:
+ max8998_update_reg(i2c, MAX8998_REG_CHGR2, 0x0 << 4, 0x3 << 4);
+ break;
+ case 6:
+ max8998_update_reg(i2c, MAX8998_REG_CHGR2, 0x1 << 4, 0x3 << 4);
+ break;
+ case 7:
+ max8998_update_reg(i2c, MAX8998_REG_CHGR2, 0x2 << 4, 0x3 << 4);
+ break;
+ case -1:
+ max8998_update_reg(i2c, MAX8998_REG_CHGR2, 0x3 << 4, 0x3 << 4);
+ break;
+ case 0:
+ dev_dbg(max8998->dev,
+ "Full Timeout not set: leave it unchanged.\n");
+ break;
+ default:
+ dev_err(max8998->dev, "Invalid Full Timeout value\n");
+ return -EINVAL;
+ }
+
+ psy_cfg.drv_data = max8998;
+
+ max8998->battery = devm_power_supply_register(max8998->dev,
+ &max8998_battery_desc,
+ &psy_cfg);
+ if (IS_ERR(max8998->battery)) {
+ ret = PTR_ERR(max8998->battery);
+ dev_err(max8998->dev, "failed: power supply register: %d\n",
+ ret);
+ return ret;
+ }
+
+ return 0;
+}
+
+static const struct platform_device_id max8998_battery_id[] = {
+ { "max8998-battery", TYPE_MAX8998 },
+ { }
+};
+
+static struct platform_driver max8998_battery_driver = {
+ .driver = {
+ .name = "max8998-battery",
+ },
+ .probe = max8998_battery_probe,
+ .id_table = max8998_battery_id,
+};
+
+module_platform_driver(max8998_battery_driver);
+
+MODULE_DESCRIPTION("MAXIM 8998 battery control driver");
+MODULE_AUTHOR("MyungJoo Ham <myungjoo.ham@samsung.com>");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:max8998-battery");
diff --git a/drivers/power/supply/mp2629_charger.c b/drivers/power/supply/mp2629_charger.c
new file mode 100644
index 000000000..bdf924b73
--- /dev/null
+++ b/drivers/power/supply/mp2629_charger.c
@@ -0,0 +1,669 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * MP2629 battery charger driver
+ *
+ * Copyright 2020 Monolithic Power Systems, Inc
+ *
+ * Author: Saravanan Sekar <sravanhome@gmail.com>
+ */
+
+#include <linux/bits.h>
+#include <linux/iio/consumer.h>
+#include <linux/iio/types.h>
+#include <linux/interrupt.h>
+#include <linux/mfd/mp2629.h>
+#include <linux/module.h>
+#include <linux/mod_devicetable.h>
+#include <linux/platform_device.h>
+#include <linux/power_supply.h>
+#include <linux/regmap.h>
+
+#define MP2629_REG_INPUT_ILIM 0x00
+#define MP2629_REG_INPUT_VLIM 0x01
+#define MP2629_REG_CHARGE_CTRL 0x04
+#define MP2629_REG_CHARGE_ILIM 0x05
+#define MP2629_REG_PRECHARGE 0x06
+#define MP2629_REG_TERM_CURRENT 0x06
+#define MP2629_REG_CHARGE_VLIM 0x07
+#define MP2629_REG_TIMER_CTRL 0x08
+#define MP2629_REG_IMPEDANCE_COMP 0x09
+#define MP2629_REG_INTERRUPT 0x0b
+#define MP2629_REG_STATUS 0x0c
+#define MP2629_REG_FAULT 0x0d
+
+#define MP2629_MASK_INPUT_TYPE GENMASK(7, 5)
+#define MP2629_MASK_CHARGE_TYPE GENMASK(4, 3)
+#define MP2629_MASK_CHARGE_CTRL GENMASK(5, 4)
+#define MP2629_MASK_WDOG_CTRL GENMASK(5, 4)
+#define MP2629_MASK_IMPEDANCE GENMASK(7, 4)
+
+#define MP2629_INPUTSOURCE_CHANGE GENMASK(7, 5)
+#define MP2629_CHARGING_CHANGE GENMASK(4, 3)
+#define MP2629_FAULT_BATTERY BIT(3)
+#define MP2629_FAULT_THERMAL BIT(4)
+#define MP2629_FAULT_INPUT BIT(5)
+#define MP2629_FAULT_OTG BIT(6)
+
+#define MP2629_MAX_BATT_CAPACITY 100
+
+#define MP2629_PROPS(_idx, _min, _max, _step) \
+ [_idx] = { \
+ .min = _min, \
+ .max = _max, \
+ .step = _step, \
+}
+
+enum mp2629_source_type {
+ MP2629_SOURCE_TYPE_NO_INPUT,
+ MP2629_SOURCE_TYPE_NON_STD,
+ MP2629_SOURCE_TYPE_SDP,
+ MP2629_SOURCE_TYPE_CDP,
+ MP2629_SOURCE_TYPE_DCP,
+ MP2629_SOURCE_TYPE_OTG = 7,
+};
+
+enum mp2629_field {
+ INPUT_ILIM,
+ INPUT_VLIM,
+ CHARGE_ILIM,
+ CHARGE_VLIM,
+ PRECHARGE,
+ TERM_CURRENT,
+ MP2629_MAX_FIELD
+};
+
+struct mp2629_charger {
+ struct device *dev;
+ int status;
+ int fault;
+
+ struct regmap *regmap;
+ struct regmap_field *regmap_fields[MP2629_MAX_FIELD];
+ struct mutex lock;
+ struct power_supply *usb;
+ struct power_supply *battery;
+ struct iio_channel *iiochan[MP2629_ADC_CHAN_END];
+};
+
+struct mp2629_prop {
+ int reg;
+ int mask;
+ int min;
+ int max;
+ int step;
+ int shift;
+};
+
+static enum power_supply_usb_type mp2629_usb_types[] = {
+ POWER_SUPPLY_USB_TYPE_SDP,
+ POWER_SUPPLY_USB_TYPE_DCP,
+ POWER_SUPPLY_USB_TYPE_CDP,
+ POWER_SUPPLY_USB_TYPE_PD_DRP,
+ POWER_SUPPLY_USB_TYPE_UNKNOWN
+};
+
+static enum power_supply_property mp2629_charger_usb_props[] = {
+ POWER_SUPPLY_PROP_ONLINE,
+ POWER_SUPPLY_PROP_USB_TYPE,
+ POWER_SUPPLY_PROP_VOLTAGE_NOW,
+ POWER_SUPPLY_PROP_CURRENT_NOW,
+ POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT,
+ POWER_SUPPLY_PROP_INPUT_VOLTAGE_LIMIT,
+};
+
+static enum power_supply_property mp2629_charger_bat_props[] = {
+ POWER_SUPPLY_PROP_STATUS,
+ POWER_SUPPLY_PROP_HEALTH,
+ POWER_SUPPLY_PROP_CHARGE_TYPE,
+ POWER_SUPPLY_PROP_VOLTAGE_NOW,
+ POWER_SUPPLY_PROP_CURRENT_NOW,
+ POWER_SUPPLY_PROP_CAPACITY,
+ POWER_SUPPLY_PROP_PRECHARGE_CURRENT,
+ POWER_SUPPLY_PROP_CHARGE_TERM_CURRENT,
+ POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT,
+ POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE,
+ POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX,
+ POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX,
+};
+
+static struct mp2629_prop props[] = {
+ MP2629_PROPS(INPUT_ILIM, 100000, 3250000, 50000),
+ MP2629_PROPS(INPUT_VLIM, 3800000, 5300000, 100000),
+ MP2629_PROPS(CHARGE_ILIM, 320000, 4520000, 40000),
+ MP2629_PROPS(CHARGE_VLIM, 3400000, 4670000, 10000),
+ MP2629_PROPS(PRECHARGE, 120000, 720000, 40000),
+ MP2629_PROPS(TERM_CURRENT, 80000, 680000, 40000),
+};
+
+static const struct reg_field mp2629_reg_fields[] = {
+ [INPUT_ILIM] = REG_FIELD(MP2629_REG_INPUT_ILIM, 0, 5),
+ [INPUT_VLIM] = REG_FIELD(MP2629_REG_INPUT_VLIM, 0, 3),
+ [CHARGE_ILIM] = REG_FIELD(MP2629_REG_CHARGE_ILIM, 0, 6),
+ [CHARGE_VLIM] = REG_FIELD(MP2629_REG_CHARGE_VLIM, 1, 7),
+ [PRECHARGE] = REG_FIELD(MP2629_REG_PRECHARGE, 4, 7),
+ [TERM_CURRENT] = REG_FIELD(MP2629_REG_TERM_CURRENT, 0, 3),
+};
+
+static char *adc_chan_name[] = {
+ "mp2629-batt-volt",
+ "mp2629-system-volt",
+ "mp2629-input-volt",
+ "mp2629-batt-current",
+ "mp2629-input-current",
+};
+
+static int mp2629_read_adc(struct mp2629_charger *charger,
+ enum mp2629_adc_chan ch,
+ union power_supply_propval *val)
+{
+ int ret;
+ int chval;
+
+ ret = iio_read_channel_processed(charger->iiochan[ch], &chval);
+ if (ret)
+ return ret;
+
+ val->intval = chval * 1000;
+
+ return 0;
+}
+
+static int mp2629_get_prop(struct mp2629_charger *charger,
+ enum mp2629_field fld,
+ union power_supply_propval *val)
+{
+ int ret;
+ unsigned int rval;
+
+ ret = regmap_field_read(charger->regmap_fields[fld], &rval);
+ if (ret)
+ return ret;
+
+ val->intval = rval * props[fld].step + props[fld].min;
+
+ return 0;
+}
+
+static int mp2629_set_prop(struct mp2629_charger *charger,
+ enum mp2629_field fld,
+ const union power_supply_propval *val)
+{
+ unsigned int rval;
+
+ if (val->intval < props[fld].min || val->intval > props[fld].max)
+ return -EINVAL;
+
+ rval = (val->intval - props[fld].min) / props[fld].step;
+ return regmap_field_write(charger->regmap_fields[fld], rval);
+}
+
+static int mp2629_get_battery_capacity(struct mp2629_charger *charger,
+ union power_supply_propval *val)
+{
+ union power_supply_propval vnow, vlim;
+ int ret;
+
+ ret = mp2629_read_adc(charger, MP2629_BATT_VOLT, &vnow);
+ if (ret)
+ return ret;
+
+ ret = mp2629_get_prop(charger, CHARGE_VLIM, &vlim);
+ if (ret)
+ return ret;
+
+ val->intval = (vnow.intval * 100) / vlim.intval;
+ val->intval = min(val->intval, MP2629_MAX_BATT_CAPACITY);
+
+ return 0;
+}
+
+static int mp2629_charger_battery_get_prop(struct power_supply *psy,
+ enum power_supply_property psp,
+ union power_supply_propval *val)
+{
+ struct mp2629_charger *charger = dev_get_drvdata(psy->dev.parent);
+ unsigned int rval;
+ int ret = 0;
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+ ret = mp2629_read_adc(charger, MP2629_BATT_VOLT, val);
+ break;
+
+ case POWER_SUPPLY_PROP_CURRENT_NOW:
+ ret = mp2629_read_adc(charger, MP2629_BATT_CURRENT, val);
+ break;
+
+ case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX:
+ val->intval = 4520000;
+ break;
+
+ case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX:
+ val->intval = 4670000;
+ break;
+
+ case POWER_SUPPLY_PROP_CAPACITY:
+ ret = mp2629_get_battery_capacity(charger, val);
+ break;
+
+ case POWER_SUPPLY_PROP_CHARGE_TERM_CURRENT:
+ ret = mp2629_get_prop(charger, TERM_CURRENT, val);
+ break;
+
+ case POWER_SUPPLY_PROP_PRECHARGE_CURRENT:
+ ret = mp2629_get_prop(charger, PRECHARGE, val);
+ break;
+
+ case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE:
+ ret = mp2629_get_prop(charger, CHARGE_VLIM, val);
+ break;
+
+ case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT:
+ ret = mp2629_get_prop(charger, CHARGE_ILIM, val);
+ break;
+
+ case POWER_SUPPLY_PROP_HEALTH:
+ if (!charger->fault)
+ val->intval = POWER_SUPPLY_HEALTH_GOOD;
+ if (MP2629_FAULT_BATTERY & charger->fault)
+ val->intval = POWER_SUPPLY_HEALTH_OVERVOLTAGE;
+ else if (MP2629_FAULT_THERMAL & charger->fault)
+ val->intval = POWER_SUPPLY_HEALTH_OVERHEAT;
+ else if (MP2629_FAULT_INPUT & charger->fault)
+ val->intval = POWER_SUPPLY_HEALTH_OVERVOLTAGE;
+ break;
+
+ case POWER_SUPPLY_PROP_STATUS:
+ ret = regmap_read(charger->regmap, MP2629_REG_STATUS, &rval);
+ if (ret)
+ break;
+
+ rval = (rval & MP2629_MASK_CHARGE_TYPE) >> 3;
+ switch (rval) {
+ case 0x00:
+ val->intval = POWER_SUPPLY_STATUS_DISCHARGING;
+ break;
+ case 0x01:
+ case 0x10:
+ val->intval = POWER_SUPPLY_STATUS_CHARGING;
+ break;
+ case 0x11:
+ val->intval = POWER_SUPPLY_STATUS_FULL;
+ }
+ break;
+
+ case POWER_SUPPLY_PROP_CHARGE_TYPE:
+ ret = regmap_read(charger->regmap, MP2629_REG_STATUS, &rval);
+ if (ret)
+ break;
+
+ rval = (rval & MP2629_MASK_CHARGE_TYPE) >> 3;
+ switch (rval) {
+ case 0x00:
+ val->intval = POWER_SUPPLY_CHARGE_TYPE_NONE;
+ break;
+ case 0x01:
+ val->intval = POWER_SUPPLY_CHARGE_TYPE_TRICKLE;
+ break;
+ case 0x10:
+ val->intval = POWER_SUPPLY_CHARGE_TYPE_STANDARD;
+ break;
+ default:
+ val->intval = POWER_SUPPLY_CHARGE_TYPE_UNKNOWN;
+ }
+ break;
+
+ default:
+ return -EINVAL;
+ }
+
+ return ret;
+}
+
+static int mp2629_charger_battery_set_prop(struct power_supply *psy,
+ enum power_supply_property psp,
+ const union power_supply_propval *val)
+{
+ struct mp2629_charger *charger = dev_get_drvdata(psy->dev.parent);
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_CHARGE_TERM_CURRENT:
+ return mp2629_set_prop(charger, TERM_CURRENT, val);
+
+ case POWER_SUPPLY_PROP_PRECHARGE_CURRENT:
+ return mp2629_set_prop(charger, PRECHARGE, val);
+
+ case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE:
+ return mp2629_set_prop(charger, CHARGE_VLIM, val);
+
+ case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT:
+ return mp2629_set_prop(charger, CHARGE_ILIM, val);
+
+ default:
+ return -EINVAL;
+ }
+}
+
+static int mp2629_charger_usb_get_prop(struct power_supply *psy,
+ enum power_supply_property psp,
+ union power_supply_propval *val)
+{
+ struct mp2629_charger *charger = dev_get_drvdata(psy->dev.parent);
+ unsigned int rval;
+ int ret;
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_ONLINE:
+ ret = regmap_read(charger->regmap, MP2629_REG_STATUS, &rval);
+ if (ret)
+ break;
+
+ val->intval = !!(rval & MP2629_MASK_INPUT_TYPE);
+ break;
+
+ case POWER_SUPPLY_PROP_USB_TYPE:
+ ret = regmap_read(charger->regmap, MP2629_REG_STATUS, &rval);
+ if (ret)
+ break;
+
+ rval = (rval & MP2629_MASK_INPUT_TYPE) >> 5;
+ switch (rval) {
+ case MP2629_SOURCE_TYPE_SDP:
+ val->intval = POWER_SUPPLY_USB_TYPE_SDP;
+ break;
+ case MP2629_SOURCE_TYPE_CDP:
+ val->intval = POWER_SUPPLY_USB_TYPE_CDP;
+ break;
+ case MP2629_SOURCE_TYPE_DCP:
+ val->intval = POWER_SUPPLY_USB_TYPE_DCP;
+ break;
+ case MP2629_SOURCE_TYPE_OTG:
+ val->intval = POWER_SUPPLY_USB_TYPE_PD_DRP;
+ break;
+ default:
+ val->intval = POWER_SUPPLY_USB_TYPE_UNKNOWN;
+ break;
+ }
+ break;
+
+ case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+ ret = mp2629_read_adc(charger, MP2629_INPUT_VOLT, val);
+ break;
+
+ case POWER_SUPPLY_PROP_CURRENT_NOW:
+ ret = mp2629_read_adc(charger, MP2629_INPUT_CURRENT, val);
+ break;
+
+ case POWER_SUPPLY_PROP_INPUT_VOLTAGE_LIMIT:
+ ret = mp2629_get_prop(charger, INPUT_VLIM, val);
+ break;
+
+ case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT:
+ ret = mp2629_get_prop(charger, INPUT_ILIM, val);
+ break;
+
+ default:
+ return -EINVAL;
+ }
+
+ return ret;
+}
+
+static int mp2629_charger_usb_set_prop(struct power_supply *psy,
+ enum power_supply_property psp,
+ const union power_supply_propval *val)
+{
+ struct mp2629_charger *charger = dev_get_drvdata(psy->dev.parent);
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_INPUT_VOLTAGE_LIMIT:
+ return mp2629_set_prop(charger, INPUT_VLIM, val);
+
+ case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT:
+ return mp2629_set_prop(charger, INPUT_ILIM, val);
+
+ default:
+ return -EINVAL;
+ }
+}
+
+static int mp2629_charger_battery_prop_writeable(struct power_supply *psy,
+ enum power_supply_property psp)
+{
+ return (psp == POWER_SUPPLY_PROP_PRECHARGE_CURRENT) ||
+ (psp == POWER_SUPPLY_PROP_CHARGE_TERM_CURRENT) ||
+ (psp == POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT) ||
+ (psp == POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE);
+}
+
+static int mp2629_charger_usb_prop_writeable(struct power_supply *psy,
+ enum power_supply_property psp)
+{
+ return (psp == POWER_SUPPLY_PROP_INPUT_VOLTAGE_LIMIT) ||
+ (psp == POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT);
+}
+
+static irqreturn_t mp2629_irq_handler(int irq, void *dev_id)
+{
+ struct mp2629_charger *charger = dev_id;
+ unsigned int rval;
+ int ret;
+
+ mutex_lock(&charger->lock);
+
+ ret = regmap_read(charger->regmap, MP2629_REG_FAULT, &rval);
+ if (ret)
+ goto unlock;
+
+ if (rval) {
+ charger->fault = rval;
+ if (MP2629_FAULT_BATTERY & rval)
+ dev_err(charger->dev, "Battery fault OVP\n");
+ else if (MP2629_FAULT_THERMAL & rval)
+ dev_err(charger->dev, "Thermal shutdown fault\n");
+ else if (MP2629_FAULT_INPUT & rval)
+ dev_err(charger->dev, "no input or input OVP\n");
+ else if (MP2629_FAULT_OTG & rval)
+ dev_err(charger->dev, "VIN overloaded\n");
+
+ goto unlock;
+ }
+
+ ret = regmap_read(charger->regmap, MP2629_REG_STATUS, &rval);
+ if (ret)
+ goto unlock;
+
+ if (rval & MP2629_INPUTSOURCE_CHANGE)
+ power_supply_changed(charger->usb);
+ else if (rval & MP2629_CHARGING_CHANGE)
+ power_supply_changed(charger->battery);
+
+unlock:
+ mutex_unlock(&charger->lock);
+
+ return IRQ_HANDLED;
+}
+
+static const struct power_supply_desc mp2629_usb_desc = {
+ .name = "mp2629_usb",
+ .type = POWER_SUPPLY_TYPE_USB,
+ .usb_types = mp2629_usb_types,
+ .num_usb_types = ARRAY_SIZE(mp2629_usb_types),
+ .properties = mp2629_charger_usb_props,
+ .num_properties = ARRAY_SIZE(mp2629_charger_usb_props),
+ .get_property = mp2629_charger_usb_get_prop,
+ .set_property = mp2629_charger_usb_set_prop,
+ .property_is_writeable = mp2629_charger_usb_prop_writeable,
+};
+
+static const struct power_supply_desc mp2629_battery_desc = {
+ .name = "mp2629_battery",
+ .type = POWER_SUPPLY_TYPE_BATTERY,
+ .properties = mp2629_charger_bat_props,
+ .num_properties = ARRAY_SIZE(mp2629_charger_bat_props),
+ .get_property = mp2629_charger_battery_get_prop,
+ .set_property = mp2629_charger_battery_set_prop,
+ .property_is_writeable = mp2629_charger_battery_prop_writeable,
+};
+
+static ssize_t batt_impedance_compensation_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct mp2629_charger *charger = dev_get_drvdata(dev->parent);
+ unsigned int rval;
+ int ret;
+
+ ret = regmap_read(charger->regmap, MP2629_REG_IMPEDANCE_COMP, &rval);
+ if (ret)
+ return ret;
+
+ rval = (rval >> 4) * 10;
+ return sprintf(buf, "%d mohm\n", rval);
+}
+
+static ssize_t batt_impedance_compensation_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf,
+ size_t count)
+{
+ struct mp2629_charger *charger = dev_get_drvdata(dev->parent);
+ unsigned int val;
+ int ret;
+
+ ret = kstrtouint(buf, 10, &val);
+ if (ret)
+ return ret;
+
+ if (val > 140)
+ return -ERANGE;
+
+ /* multiples of 10 mohm so round off */
+ val = val / 10;
+ ret = regmap_update_bits(charger->regmap, MP2629_REG_IMPEDANCE_COMP,
+ MP2629_MASK_IMPEDANCE, val << 4);
+ if (ret)
+ return ret;
+
+ return count;
+}
+
+static DEVICE_ATTR_RW(batt_impedance_compensation);
+
+static struct attribute *mp2629_charger_sysfs_attrs[] = {
+ &dev_attr_batt_impedance_compensation.attr,
+ NULL
+};
+ATTRIBUTE_GROUPS(mp2629_charger_sysfs);
+
+static void mp2629_charger_disable(void *data)
+{
+ struct mp2629_charger *charger = data;
+
+ regmap_update_bits(charger->regmap, MP2629_REG_CHARGE_CTRL,
+ MP2629_MASK_CHARGE_CTRL, 0);
+}
+
+static int mp2629_charger_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct mp2629_data *ddata = dev_get_drvdata(dev->parent);
+ struct mp2629_charger *charger;
+ struct power_supply_config psy_cfg = {};
+ int ret, i, irq;
+
+ charger = devm_kzalloc(dev, sizeof(*charger), GFP_KERNEL);
+ if (!charger)
+ return -ENOMEM;
+
+ charger->regmap = ddata->regmap;
+ charger->dev = dev;
+ platform_set_drvdata(pdev, charger);
+
+ irq = platform_get_irq_optional(to_platform_device(dev->parent), 0);
+ if (irq < 0) {
+ dev_err(dev, "get irq fail: %d\n", irq);
+ return irq;
+ }
+
+ for (i = 0; i < MP2629_MAX_FIELD; i++) {
+ charger->regmap_fields[i] = devm_regmap_field_alloc(dev,
+ charger->regmap, mp2629_reg_fields[i]);
+ if (IS_ERR(charger->regmap_fields[i])) {
+ dev_err(dev, "regmap field alloc fail %d\n", i);
+ return PTR_ERR(charger->regmap_fields[i]);
+ }
+ }
+
+ for (i = 0; i < MP2629_ADC_CHAN_END; i++) {
+ charger->iiochan[i] = devm_iio_channel_get(dev,
+ adc_chan_name[i]);
+ if (IS_ERR(charger->iiochan[i])) {
+ dev_err(dev, "iio chan get %s err\n", adc_chan_name[i]);
+ return PTR_ERR(charger->iiochan[i]);
+ }
+ }
+
+ ret = devm_add_action_or_reset(dev, mp2629_charger_disable, charger);
+ if (ret)
+ return ret;
+
+ charger->usb = devm_power_supply_register(dev, &mp2629_usb_desc, NULL);
+ if (IS_ERR(charger->usb)) {
+ dev_err(dev, "power supply register usb failed\n");
+ return PTR_ERR(charger->usb);
+ }
+
+ psy_cfg.drv_data = charger;
+ psy_cfg.attr_grp = mp2629_charger_sysfs_groups;
+ charger->battery = devm_power_supply_register(dev,
+ &mp2629_battery_desc, &psy_cfg);
+ if (IS_ERR(charger->battery)) {
+ dev_err(dev, "power supply register battery failed\n");
+ return PTR_ERR(charger->battery);
+ }
+
+ ret = regmap_update_bits(charger->regmap, MP2629_REG_CHARGE_CTRL,
+ MP2629_MASK_CHARGE_CTRL, BIT(4));
+ if (ret) {
+ dev_err(dev, "enable charge fail: %d\n", ret);
+ return ret;
+ }
+
+ regmap_update_bits(charger->regmap, MP2629_REG_TIMER_CTRL,
+ MP2629_MASK_WDOG_CTRL, 0);
+
+ mutex_init(&charger->lock);
+
+ ret = devm_request_threaded_irq(dev, irq, NULL, mp2629_irq_handler,
+ IRQF_ONESHOT | IRQF_TRIGGER_RISING,
+ "mp2629-charger", charger);
+ if (ret) {
+ dev_err(dev, "failed to request gpio IRQ\n");
+ return ret;
+ }
+
+ regmap_update_bits(charger->regmap, MP2629_REG_INTERRUPT,
+ GENMASK(6, 5), BIT(6) | BIT(5));
+
+ return 0;
+}
+
+static const struct of_device_id mp2629_charger_of_match[] = {
+ { .compatible = "mps,mp2629_charger"},
+ {}
+};
+MODULE_DEVICE_TABLE(of, mp2629_charger_of_match);
+
+static struct platform_driver mp2629_charger_driver = {
+ .driver = {
+ .name = "mp2629_charger",
+ .of_match_table = mp2629_charger_of_match,
+ },
+ .probe = mp2629_charger_probe,
+};
+module_platform_driver(mp2629_charger_driver);
+
+MODULE_AUTHOR("Saravanan Sekar <sravanhome@gmail.com>");
+MODULE_DESCRIPTION("MP2629 Charger driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/power/supply/olpc_battery.c b/drivers/power/supply/olpc_battery.c
new file mode 100644
index 000000000..e0476ec06
--- /dev/null
+++ b/drivers/power/supply/olpc_battery.c
@@ -0,0 +1,730 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Battery driver for One Laptop Per Child board.
+ *
+ * Copyright © 2006-2010 David Woodhouse <dwmw2@infradead.org>
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/mod_devicetable.h>
+#include <linux/types.h>
+#include <linux/err.h>
+#include <linux/device.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/power_supply.h>
+#include <linux/jiffies.h>
+#include <linux/sched.h>
+#include <linux/olpc-ec.h>
+
+
+#define EC_BAT_VOLTAGE 0x10 /* uint16_t, *9.76/32, mV */
+#define EC_BAT_CURRENT 0x11 /* int16_t, *15.625/120, mA */
+#define EC_BAT_ACR 0x12 /* int16_t, *6250/15, µAh */
+#define EC_BAT_TEMP 0x13 /* uint16_t, *100/256, °C */
+#define EC_AMB_TEMP 0x14 /* uint16_t, *100/256, °C */
+#define EC_BAT_STATUS 0x15 /* uint8_t, bitmask */
+#define EC_BAT_SOC 0x16 /* uint8_t, percentage */
+#define EC_BAT_SERIAL 0x17 /* uint8_t[6] */
+#define EC_BAT_EEPROM 0x18 /* uint8_t adr as input, uint8_t output */
+#define EC_BAT_ERRCODE 0x1f /* uint8_t, bitmask */
+
+#define BAT_STAT_PRESENT 0x01
+#define BAT_STAT_FULL 0x02
+#define BAT_STAT_LOW 0x04
+#define BAT_STAT_DESTROY 0x08
+#define BAT_STAT_AC 0x10
+#define BAT_STAT_CHARGING 0x20
+#define BAT_STAT_DISCHARGING 0x40
+#define BAT_STAT_TRICKLE 0x80
+
+#define BAT_ERR_INFOFAIL 0x02
+#define BAT_ERR_OVERVOLTAGE 0x04
+#define BAT_ERR_OVERTEMP 0x05
+#define BAT_ERR_GAUGESTOP 0x06
+#define BAT_ERR_OUT_OF_CONTROL 0x07
+#define BAT_ERR_ID_FAIL 0x09
+#define BAT_ERR_ACR_FAIL 0x10
+
+#define BAT_ADDR_MFR_TYPE 0x5F
+
+struct olpc_battery_data {
+ struct power_supply *olpc_ac;
+ struct power_supply *olpc_bat;
+ char bat_serial[17];
+ bool new_proto;
+ bool little_endian;
+};
+
+/*********************************************************************
+ * Power
+ *********************************************************************/
+
+static int olpc_ac_get_prop(struct power_supply *psy,
+ enum power_supply_property psp,
+ union power_supply_propval *val)
+{
+ int ret = 0;
+ uint8_t status;
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_ONLINE:
+ ret = olpc_ec_cmd(EC_BAT_STATUS, NULL, 0, &status, 1);
+ if (ret)
+ return ret;
+
+ val->intval = !!(status & BAT_STAT_AC);
+ break;
+ default:
+ ret = -EINVAL;
+ break;
+ }
+ return ret;
+}
+
+static enum power_supply_property olpc_ac_props[] = {
+ POWER_SUPPLY_PROP_ONLINE,
+};
+
+static const struct power_supply_desc olpc_ac_desc = {
+ .name = "olpc_ac",
+ .type = POWER_SUPPLY_TYPE_MAINS,
+ .properties = olpc_ac_props,
+ .num_properties = ARRAY_SIZE(olpc_ac_props),
+ .get_property = olpc_ac_get_prop,
+};
+
+static int olpc_bat_get_status(struct olpc_battery_data *data,
+ union power_supply_propval *val, uint8_t ec_byte)
+{
+ if (data->new_proto) {
+ if (ec_byte & (BAT_STAT_CHARGING | BAT_STAT_TRICKLE))
+ val->intval = POWER_SUPPLY_STATUS_CHARGING;
+ else if (ec_byte & BAT_STAT_DISCHARGING)
+ val->intval = POWER_SUPPLY_STATUS_DISCHARGING;
+ else if (ec_byte & BAT_STAT_FULL)
+ val->intval = POWER_SUPPLY_STATUS_FULL;
+ else /* er,... */
+ val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING;
+ } else {
+ /* Older EC didn't report charge/discharge bits */
+ if (!(ec_byte & BAT_STAT_AC)) /* No AC means discharging */
+ val->intval = POWER_SUPPLY_STATUS_DISCHARGING;
+ else if (ec_byte & BAT_STAT_FULL)
+ val->intval = POWER_SUPPLY_STATUS_FULL;
+ else /* Not _necessarily_ true but EC doesn't tell all yet */
+ val->intval = POWER_SUPPLY_STATUS_CHARGING;
+ }
+
+ return 0;
+}
+
+static int olpc_bat_get_health(union power_supply_propval *val)
+{
+ uint8_t ec_byte;
+ int ret;
+
+ ret = olpc_ec_cmd(EC_BAT_ERRCODE, NULL, 0, &ec_byte, 1);
+ if (ret)
+ return ret;
+
+ switch (ec_byte) {
+ case 0:
+ val->intval = POWER_SUPPLY_HEALTH_GOOD;
+ break;
+
+ case BAT_ERR_OVERTEMP:
+ val->intval = POWER_SUPPLY_HEALTH_OVERHEAT;
+ break;
+
+ case BAT_ERR_OVERVOLTAGE:
+ val->intval = POWER_SUPPLY_HEALTH_OVERVOLTAGE;
+ break;
+
+ case BAT_ERR_INFOFAIL:
+ case BAT_ERR_OUT_OF_CONTROL:
+ case BAT_ERR_ID_FAIL:
+ case BAT_ERR_ACR_FAIL:
+ val->intval = POWER_SUPPLY_HEALTH_UNSPEC_FAILURE;
+ break;
+
+ default:
+ /* Eep. We don't know this failure code */
+ ret = -EIO;
+ }
+
+ return ret;
+}
+
+static int olpc_bat_get_mfr(union power_supply_propval *val)
+{
+ uint8_t ec_byte;
+ int ret;
+
+ ec_byte = BAT_ADDR_MFR_TYPE;
+ ret = olpc_ec_cmd(EC_BAT_EEPROM, &ec_byte, 1, &ec_byte, 1);
+ if (ret)
+ return ret;
+
+ switch (ec_byte >> 4) {
+ case 1:
+ val->strval = "Gold Peak";
+ break;
+ case 2:
+ val->strval = "BYD";
+ break;
+ default:
+ val->strval = "Unknown";
+ break;
+ }
+
+ return ret;
+}
+
+static int olpc_bat_get_tech(union power_supply_propval *val)
+{
+ uint8_t ec_byte;
+ int ret;
+
+ ec_byte = BAT_ADDR_MFR_TYPE;
+ ret = olpc_ec_cmd(EC_BAT_EEPROM, &ec_byte, 1, &ec_byte, 1);
+ if (ret)
+ return ret;
+
+ switch (ec_byte & 0xf) {
+ case 1:
+ val->intval = POWER_SUPPLY_TECHNOLOGY_NiMH;
+ break;
+ case 2:
+ val->intval = POWER_SUPPLY_TECHNOLOGY_LiFe;
+ break;
+ default:
+ val->intval = POWER_SUPPLY_TECHNOLOGY_UNKNOWN;
+ break;
+ }
+
+ return ret;
+}
+
+static int olpc_bat_get_charge_full_design(union power_supply_propval *val)
+{
+ uint8_t ec_byte;
+ union power_supply_propval tech;
+ int ret, mfr;
+
+ ret = olpc_bat_get_tech(&tech);
+ if (ret)
+ return ret;
+
+ ec_byte = BAT_ADDR_MFR_TYPE;
+ ret = olpc_ec_cmd(EC_BAT_EEPROM, &ec_byte, 1, &ec_byte, 1);
+ if (ret)
+ return ret;
+
+ mfr = ec_byte >> 4;
+
+ switch (tech.intval) {
+ case POWER_SUPPLY_TECHNOLOGY_NiMH:
+ switch (mfr) {
+ case 1: /* Gold Peak */
+ val->intval = 3000000*.8;
+ break;
+ default:
+ return -EIO;
+ }
+ break;
+
+ case POWER_SUPPLY_TECHNOLOGY_LiFe:
+ switch (mfr) {
+ case 1: /* Gold Peak, fall through */
+ case 2: /* BYD */
+ val->intval = 2800000;
+ break;
+ default:
+ return -EIO;
+ }
+ break;
+
+ default:
+ return -EIO;
+ }
+
+ return ret;
+}
+
+static int olpc_bat_get_charge_now(union power_supply_propval *val)
+{
+ uint8_t soc;
+ union power_supply_propval full;
+ int ret;
+
+ ret = olpc_ec_cmd(EC_BAT_SOC, NULL, 0, &soc, 1);
+ if (ret)
+ return ret;
+
+ ret = olpc_bat_get_charge_full_design(&full);
+ if (ret)
+ return ret;
+
+ val->intval = soc * (full.intval / 100);
+ return 0;
+}
+
+static int olpc_bat_get_voltage_max_design(union power_supply_propval *val)
+{
+ uint8_t ec_byte;
+ union power_supply_propval tech;
+ int mfr;
+ int ret;
+
+ ret = olpc_bat_get_tech(&tech);
+ if (ret)
+ return ret;
+
+ ec_byte = BAT_ADDR_MFR_TYPE;
+ ret = olpc_ec_cmd(EC_BAT_EEPROM, &ec_byte, 1, &ec_byte, 1);
+ if (ret)
+ return ret;
+
+ mfr = ec_byte >> 4;
+
+ switch (tech.intval) {
+ case POWER_SUPPLY_TECHNOLOGY_NiMH:
+ switch (mfr) {
+ case 1: /* Gold Peak */
+ val->intval = 6000000;
+ break;
+ default:
+ return -EIO;
+ }
+ break;
+
+ case POWER_SUPPLY_TECHNOLOGY_LiFe:
+ switch (mfr) {
+ case 1: /* Gold Peak */
+ val->intval = 6400000;
+ break;
+ case 2: /* BYD */
+ val->intval = 6500000;
+ break;
+ default:
+ return -EIO;
+ }
+ break;
+
+ default:
+ return -EIO;
+ }
+
+ return ret;
+}
+
+static u16 ecword_to_cpu(struct olpc_battery_data *data, u16 ec_word)
+{
+ if (data->little_endian)
+ return le16_to_cpu((__force __le16)ec_word);
+ else
+ return be16_to_cpu((__force __be16)ec_word);
+}
+
+/*********************************************************************
+ * Battery properties
+ *********************************************************************/
+static int olpc_bat_get_property(struct power_supply *psy,
+ enum power_supply_property psp,
+ union power_supply_propval *val)
+{
+ struct olpc_battery_data *data = power_supply_get_drvdata(psy);
+ int ret = 0;
+ u16 ec_word;
+ uint8_t ec_byte;
+ __be64 ser_buf;
+
+ ret = olpc_ec_cmd(EC_BAT_STATUS, NULL, 0, &ec_byte, 1);
+ if (ret)
+ return ret;
+
+ /* Theoretically there's a race here -- the battery could be
+ removed immediately after we check whether it's present, and
+ then we query for some other property of the now-absent battery.
+ It doesn't matter though -- the EC will return the last-known
+ information, and it's as if we just ran that _little_ bit faster
+ and managed to read it out before the battery went away. */
+ if (!(ec_byte & (BAT_STAT_PRESENT | BAT_STAT_TRICKLE)) &&
+ psp != POWER_SUPPLY_PROP_PRESENT)
+ return -ENODEV;
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_STATUS:
+ ret = olpc_bat_get_status(data, val, ec_byte);
+ if (ret)
+ return ret;
+ break;
+ case POWER_SUPPLY_PROP_CHARGE_TYPE:
+ if (ec_byte & BAT_STAT_TRICKLE)
+ val->intval = POWER_SUPPLY_CHARGE_TYPE_TRICKLE;
+ else if (ec_byte & BAT_STAT_CHARGING)
+ val->intval = POWER_SUPPLY_CHARGE_TYPE_FAST;
+ else
+ val->intval = POWER_SUPPLY_CHARGE_TYPE_NONE;
+ break;
+ case POWER_SUPPLY_PROP_PRESENT:
+ val->intval = !!(ec_byte & (BAT_STAT_PRESENT |
+ BAT_STAT_TRICKLE));
+ break;
+
+ case POWER_SUPPLY_PROP_HEALTH:
+ if (ec_byte & BAT_STAT_DESTROY)
+ val->intval = POWER_SUPPLY_HEALTH_DEAD;
+ else {
+ ret = olpc_bat_get_health(val);
+ if (ret)
+ return ret;
+ }
+ break;
+
+ case POWER_SUPPLY_PROP_MANUFACTURER:
+ ret = olpc_bat_get_mfr(val);
+ if (ret)
+ return ret;
+ break;
+ case POWER_SUPPLY_PROP_TECHNOLOGY:
+ ret = olpc_bat_get_tech(val);
+ if (ret)
+ return ret;
+ break;
+ case POWER_SUPPLY_PROP_VOLTAGE_AVG:
+ case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+ ret = olpc_ec_cmd(EC_BAT_VOLTAGE, NULL, 0, (void *)&ec_word, 2);
+ if (ret)
+ return ret;
+
+ val->intval = ecword_to_cpu(data, ec_word) * 9760L / 32;
+ break;
+ case POWER_SUPPLY_PROP_CURRENT_AVG:
+ case POWER_SUPPLY_PROP_CURRENT_NOW:
+ ret = olpc_ec_cmd(EC_BAT_CURRENT, NULL, 0, (void *)&ec_word, 2);
+ if (ret)
+ return ret;
+
+ val->intval = ecword_to_cpu(data, ec_word) * 15625L / 120;
+ break;
+ case POWER_SUPPLY_PROP_CAPACITY:
+ ret = olpc_ec_cmd(EC_BAT_SOC, NULL, 0, &ec_byte, 1);
+ if (ret)
+ return ret;
+ val->intval = ec_byte;
+ break;
+ case POWER_SUPPLY_PROP_CAPACITY_LEVEL:
+ if (ec_byte & BAT_STAT_FULL)
+ val->intval = POWER_SUPPLY_CAPACITY_LEVEL_FULL;
+ else if (ec_byte & BAT_STAT_LOW)
+ val->intval = POWER_SUPPLY_CAPACITY_LEVEL_LOW;
+ else
+ val->intval = POWER_SUPPLY_CAPACITY_LEVEL_NORMAL;
+ break;
+ case POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN:
+ ret = olpc_bat_get_charge_full_design(val);
+ if (ret)
+ return ret;
+ break;
+ case POWER_SUPPLY_PROP_CHARGE_NOW:
+ ret = olpc_bat_get_charge_now(val);
+ if (ret)
+ return ret;
+ break;
+ case POWER_SUPPLY_PROP_TEMP:
+ ret = olpc_ec_cmd(EC_BAT_TEMP, NULL, 0, (void *)&ec_word, 2);
+ if (ret)
+ return ret;
+
+ val->intval = ecword_to_cpu(data, ec_word) * 10 / 256;
+ break;
+ case POWER_SUPPLY_PROP_TEMP_AMBIENT:
+ ret = olpc_ec_cmd(EC_AMB_TEMP, NULL, 0, (void *)&ec_word, 2);
+ if (ret)
+ return ret;
+
+ val->intval = (int)ecword_to_cpu(data, ec_word) * 10 / 256;
+ break;
+ case POWER_SUPPLY_PROP_CHARGE_COUNTER:
+ ret = olpc_ec_cmd(EC_BAT_ACR, NULL, 0, (void *)&ec_word, 2);
+ if (ret)
+ return ret;
+
+ val->intval = ecword_to_cpu(data, ec_word) * 6250 / 15;
+ break;
+ case POWER_SUPPLY_PROP_SERIAL_NUMBER:
+ ret = olpc_ec_cmd(EC_BAT_SERIAL, NULL, 0, (void *)&ser_buf, 8);
+ if (ret)
+ return ret;
+
+ sprintf(data->bat_serial, "%016llx", (long long)be64_to_cpu(ser_buf));
+ val->strval = data->bat_serial;
+ break;
+ case POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN:
+ ret = olpc_bat_get_voltage_max_design(val);
+ if (ret)
+ return ret;
+ break;
+ default:
+ ret = -EINVAL;
+ break;
+ }
+
+ return ret;
+}
+
+static enum power_supply_property olpc_xo1_bat_props[] = {
+ POWER_SUPPLY_PROP_STATUS,
+ POWER_SUPPLY_PROP_CHARGE_TYPE,
+ POWER_SUPPLY_PROP_PRESENT,
+ POWER_SUPPLY_PROP_HEALTH,
+ POWER_SUPPLY_PROP_TECHNOLOGY,
+ POWER_SUPPLY_PROP_VOLTAGE_AVG,
+ POWER_SUPPLY_PROP_VOLTAGE_NOW,
+ POWER_SUPPLY_PROP_CURRENT_AVG,
+ POWER_SUPPLY_PROP_CURRENT_NOW,
+ POWER_SUPPLY_PROP_CAPACITY,
+ POWER_SUPPLY_PROP_CAPACITY_LEVEL,
+ POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN,
+ POWER_SUPPLY_PROP_CHARGE_NOW,
+ POWER_SUPPLY_PROP_TEMP,
+ POWER_SUPPLY_PROP_TEMP_AMBIENT,
+ POWER_SUPPLY_PROP_MANUFACTURER,
+ POWER_SUPPLY_PROP_SERIAL_NUMBER,
+ POWER_SUPPLY_PROP_CHARGE_COUNTER,
+ POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN,
+};
+
+/* XO-1.5 does not have ambient temperature property */
+static enum power_supply_property olpc_xo15_bat_props[] = {
+ POWER_SUPPLY_PROP_STATUS,
+ POWER_SUPPLY_PROP_CHARGE_TYPE,
+ POWER_SUPPLY_PROP_PRESENT,
+ POWER_SUPPLY_PROP_HEALTH,
+ POWER_SUPPLY_PROP_TECHNOLOGY,
+ POWER_SUPPLY_PROP_VOLTAGE_AVG,
+ POWER_SUPPLY_PROP_VOLTAGE_NOW,
+ POWER_SUPPLY_PROP_CURRENT_AVG,
+ POWER_SUPPLY_PROP_CURRENT_NOW,
+ POWER_SUPPLY_PROP_CAPACITY,
+ POWER_SUPPLY_PROP_CAPACITY_LEVEL,
+ POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN,
+ POWER_SUPPLY_PROP_CHARGE_NOW,
+ POWER_SUPPLY_PROP_TEMP,
+ POWER_SUPPLY_PROP_MANUFACTURER,
+ POWER_SUPPLY_PROP_SERIAL_NUMBER,
+ POWER_SUPPLY_PROP_CHARGE_COUNTER,
+ POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN,
+};
+
+/* EEPROM reading goes completely around the power_supply API, sadly */
+
+#define EEPROM_START 0x20
+#define EEPROM_END 0x80
+#define EEPROM_SIZE (EEPROM_END - EEPROM_START)
+
+static ssize_t olpc_bat_eeprom_read(struct file *filp, struct kobject *kobj,
+ struct bin_attribute *attr, char *buf, loff_t off, size_t count)
+{
+ uint8_t ec_byte;
+ int ret;
+ int i;
+
+ for (i = 0; i < count; i++) {
+ ec_byte = EEPROM_START + off + i;
+ ret = olpc_ec_cmd(EC_BAT_EEPROM, &ec_byte, 1, &buf[i], 1);
+ if (ret) {
+ pr_err("olpc-battery: "
+ "EC_BAT_EEPROM cmd @ 0x%x failed - %d!\n",
+ ec_byte, ret);
+ return -EIO;
+ }
+ }
+
+ return count;
+}
+
+static struct bin_attribute olpc_bat_eeprom = {
+ .attr = {
+ .name = "eeprom",
+ .mode = S_IRUGO,
+ },
+ .size = EEPROM_SIZE,
+ .read = olpc_bat_eeprom_read,
+};
+
+/* Allow userspace to see the specific error value pulled from the EC */
+
+static ssize_t olpc_bat_error_read(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ uint8_t ec_byte;
+ ssize_t ret;
+
+ ret = olpc_ec_cmd(EC_BAT_ERRCODE, NULL, 0, &ec_byte, 1);
+ if (ret < 0)
+ return ret;
+
+ return sprintf(buf, "%d\n", ec_byte);
+}
+
+static struct device_attribute olpc_bat_error = {
+ .attr = {
+ .name = "error",
+ .mode = S_IRUGO,
+ },
+ .show = olpc_bat_error_read,
+};
+
+static struct attribute *olpc_bat_sysfs_attrs[] = {
+ &olpc_bat_error.attr,
+ NULL
+};
+
+static struct bin_attribute *olpc_bat_sysfs_bin_attrs[] = {
+ &olpc_bat_eeprom,
+ NULL
+};
+
+static const struct attribute_group olpc_bat_sysfs_group = {
+ .attrs = olpc_bat_sysfs_attrs,
+ .bin_attrs = olpc_bat_sysfs_bin_attrs,
+
+};
+
+static const struct attribute_group *olpc_bat_sysfs_groups[] = {
+ &olpc_bat_sysfs_group,
+ NULL
+};
+
+/*********************************************************************
+ * Initialisation
+ *********************************************************************/
+
+static struct power_supply_desc olpc_bat_desc = {
+ .name = "olpc_battery",
+ .get_property = olpc_bat_get_property,
+ .use_for_apm = 1,
+};
+
+static int olpc_battery_suspend(struct platform_device *pdev,
+ pm_message_t state)
+{
+ struct olpc_battery_data *data = platform_get_drvdata(pdev);
+
+ if (device_may_wakeup(&data->olpc_ac->dev))
+ olpc_ec_wakeup_set(EC_SCI_SRC_ACPWR);
+ else
+ olpc_ec_wakeup_clear(EC_SCI_SRC_ACPWR);
+
+ if (device_may_wakeup(&data->olpc_bat->dev))
+ olpc_ec_wakeup_set(EC_SCI_SRC_BATTERY | EC_SCI_SRC_BATSOC
+ | EC_SCI_SRC_BATERR);
+ else
+ olpc_ec_wakeup_clear(EC_SCI_SRC_BATTERY | EC_SCI_SRC_BATSOC
+ | EC_SCI_SRC_BATERR);
+
+ return 0;
+}
+
+static int olpc_battery_probe(struct platform_device *pdev)
+{
+ struct power_supply_config bat_psy_cfg = {};
+ struct power_supply_config ac_psy_cfg = {};
+ struct olpc_battery_data *data;
+ uint8_t status;
+ uint8_t ecver;
+ int ret;
+
+ data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
+ platform_set_drvdata(pdev, data);
+
+ /* See if the EC is already there and get the EC revision */
+ ret = olpc_ec_cmd(EC_FIRMWARE_REV, NULL, 0, &ecver, 1);
+ if (ret)
+ return ret;
+
+ if (of_find_compatible_node(NULL, NULL, "olpc,xo1.75-ec")) {
+ /* XO 1.75 */
+ data->new_proto = true;
+ data->little_endian = true;
+ } else if (ecver > 0x44) {
+ /* XO 1 or 1.5 with a new EC firmware. */
+ data->new_proto = true;
+ } else if (ecver < 0x44) {
+ /*
+ * We've seen a number of EC protocol changes; this driver
+ * requires the latest EC protocol, supported by 0x44 and above.
+ */
+ printk(KERN_NOTICE "OLPC EC version 0x%02x too old for "
+ "battery driver.\n", ecver);
+ return -ENXIO;
+ }
+
+ ret = olpc_ec_cmd(EC_BAT_STATUS, NULL, 0, &status, 1);
+ if (ret)
+ return ret;
+
+ /* Ignore the status. It doesn't actually matter */
+
+ ac_psy_cfg.of_node = pdev->dev.of_node;
+ ac_psy_cfg.drv_data = data;
+
+ data->olpc_ac = devm_power_supply_register(&pdev->dev, &olpc_ac_desc,
+ &ac_psy_cfg);
+ if (IS_ERR(data->olpc_ac))
+ return PTR_ERR(data->olpc_ac);
+
+ if (of_device_is_compatible(pdev->dev.of_node, "olpc,xo1.5-battery")) {
+ /* XO-1.5 */
+ olpc_bat_desc.properties = olpc_xo15_bat_props;
+ olpc_bat_desc.num_properties = ARRAY_SIZE(olpc_xo15_bat_props);
+ } else {
+ /* XO-1 */
+ olpc_bat_desc.properties = olpc_xo1_bat_props;
+ olpc_bat_desc.num_properties = ARRAY_SIZE(olpc_xo1_bat_props);
+ }
+
+ bat_psy_cfg.of_node = pdev->dev.of_node;
+ bat_psy_cfg.drv_data = data;
+ bat_psy_cfg.attr_grp = olpc_bat_sysfs_groups;
+
+ data->olpc_bat = devm_power_supply_register(&pdev->dev, &olpc_bat_desc,
+ &bat_psy_cfg);
+ if (IS_ERR(data->olpc_bat))
+ return PTR_ERR(data->olpc_bat);
+
+ if (olpc_ec_wakeup_available()) {
+ device_set_wakeup_capable(&data->olpc_ac->dev, true);
+ device_set_wakeup_capable(&data->olpc_bat->dev, true);
+ }
+
+ return 0;
+}
+
+static const struct of_device_id olpc_battery_ids[] = {
+ { .compatible = "olpc,xo1-battery" },
+ { .compatible = "olpc,xo1.5-battery" },
+ {}
+};
+MODULE_DEVICE_TABLE(of, olpc_battery_ids);
+
+static struct platform_driver olpc_battery_driver = {
+ .driver = {
+ .name = "olpc-battery",
+ .of_match_table = olpc_battery_ids,
+ },
+ .probe = olpc_battery_probe,
+ .suspend = olpc_battery_suspend,
+};
+
+module_platform_driver(olpc_battery_driver);
+
+MODULE_AUTHOR("David Woodhouse <dwmw2@infradead.org>");
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Battery driver for One Laptop Per Child 'XO' machine");
diff --git a/drivers/power/supply/pcf50633-charger.c b/drivers/power/supply/pcf50633-charger.c
new file mode 100644
index 000000000..8c5d892f6
--- /dev/null
+++ b/drivers/power/supply/pcf50633-charger.c
@@ -0,0 +1,473 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/* NXP PCF50633 Main Battery Charger Driver
+ *
+ * (C) 2006-2008 by Openmoko, Inc.
+ * Author: Balaji Rao <balajirrao@openmoko.org>
+ * All rights reserved.
+ *
+ * Broken down from monstrous PCF50633 driver mainly by
+ * Harald Welte, Andy Green and Werner Almesberger
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/device.h>
+#include <linux/sysfs.h>
+#include <linux/platform_device.h>
+#include <linux/power_supply.h>
+
+#include <linux/mfd/pcf50633/core.h>
+#include <linux/mfd/pcf50633/mbc.h>
+
+struct pcf50633_mbc {
+ struct pcf50633 *pcf;
+
+ int adapter_online;
+ int usb_online;
+
+ struct power_supply *usb;
+ struct power_supply *adapter;
+ struct power_supply *ac;
+};
+
+int pcf50633_mbc_usb_curlim_set(struct pcf50633 *pcf, int ma)
+{
+ struct pcf50633_mbc *mbc = platform_get_drvdata(pcf->mbc_pdev);
+ int ret = 0;
+ u8 bits;
+ u8 mbcs2, chgmod;
+ unsigned int mbcc5;
+
+ if (ma >= 1000) {
+ bits = PCF50633_MBCC7_USB_1000mA;
+ ma = 1000;
+ } else if (ma >= 500) {
+ bits = PCF50633_MBCC7_USB_500mA;
+ ma = 500;
+ } else if (ma >= 100) {
+ bits = PCF50633_MBCC7_USB_100mA;
+ ma = 100;
+ } else {
+ bits = PCF50633_MBCC7_USB_SUSPEND;
+ ma = 0;
+ }
+
+ ret = pcf50633_reg_set_bit_mask(pcf, PCF50633_REG_MBCC7,
+ PCF50633_MBCC7_USB_MASK, bits);
+ if (ret)
+ dev_err(pcf->dev, "error setting usb curlim to %d mA\n", ma);
+ else
+ dev_info(pcf->dev, "usb curlim to %d mA\n", ma);
+
+ /*
+ * We limit the charging current to be the USB current limit.
+ * The reason is that on pcf50633, when it enters PMU Standby mode,
+ * which it does when the device goes "off", the USB current limit
+ * reverts to the variant default. In at least one common case, that
+ * default is 500mA. By setting the charging current to be the same
+ * as the USB limit we set here before PMU standby, we enforce it only
+ * using the correct amount of current even when the USB current limit
+ * gets reset to the wrong thing
+ */
+
+ if (mbc->pcf->pdata->charger_reference_current_ma) {
+ mbcc5 = (ma << 8) / mbc->pcf->pdata->charger_reference_current_ma;
+ if (mbcc5 > 255)
+ mbcc5 = 255;
+ pcf50633_reg_write(mbc->pcf, PCF50633_REG_MBCC5, mbcc5);
+ }
+
+ mbcs2 = pcf50633_reg_read(mbc->pcf, PCF50633_REG_MBCS2);
+ chgmod = (mbcs2 & PCF50633_MBCS2_MBC_MASK);
+
+ /* If chgmod == BATFULL, setting chgena has no effect.
+ * Datasheet says we need to set resume instead but when autoresume is
+ * used resume doesn't work. Clear and set chgena instead.
+ */
+ if (chgmod != PCF50633_MBCS2_MBC_BAT_FULL)
+ pcf50633_reg_set_bit_mask(pcf, PCF50633_REG_MBCC1,
+ PCF50633_MBCC1_CHGENA, PCF50633_MBCC1_CHGENA);
+ else {
+ pcf50633_reg_clear_bits(pcf, PCF50633_REG_MBCC1,
+ PCF50633_MBCC1_CHGENA);
+ pcf50633_reg_set_bit_mask(pcf, PCF50633_REG_MBCC1,
+ PCF50633_MBCC1_CHGENA, PCF50633_MBCC1_CHGENA);
+ }
+
+ power_supply_changed(mbc->usb);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(pcf50633_mbc_usb_curlim_set);
+
+int pcf50633_mbc_get_status(struct pcf50633 *pcf)
+{
+ struct pcf50633_mbc *mbc = platform_get_drvdata(pcf->mbc_pdev);
+ int status = 0;
+ u8 chgmod;
+
+ if (!mbc)
+ return 0;
+
+ chgmod = pcf50633_reg_read(mbc->pcf, PCF50633_REG_MBCS2)
+ & PCF50633_MBCS2_MBC_MASK;
+
+ if (mbc->usb_online)
+ status |= PCF50633_MBC_USB_ONLINE;
+ if (chgmod == PCF50633_MBCS2_MBC_USB_PRE ||
+ chgmod == PCF50633_MBCS2_MBC_USB_PRE_WAIT ||
+ chgmod == PCF50633_MBCS2_MBC_USB_FAST ||
+ chgmod == PCF50633_MBCS2_MBC_USB_FAST_WAIT)
+ status |= PCF50633_MBC_USB_ACTIVE;
+ if (mbc->adapter_online)
+ status |= PCF50633_MBC_ADAPTER_ONLINE;
+ if (chgmod == PCF50633_MBCS2_MBC_ADP_PRE ||
+ chgmod == PCF50633_MBCS2_MBC_ADP_PRE_WAIT ||
+ chgmod == PCF50633_MBCS2_MBC_ADP_FAST ||
+ chgmod == PCF50633_MBCS2_MBC_ADP_FAST_WAIT)
+ status |= PCF50633_MBC_ADAPTER_ACTIVE;
+
+ return status;
+}
+EXPORT_SYMBOL_GPL(pcf50633_mbc_get_status);
+
+int pcf50633_mbc_get_usb_online_status(struct pcf50633 *pcf)
+{
+ struct pcf50633_mbc *mbc = platform_get_drvdata(pcf->mbc_pdev);
+
+ if (!mbc)
+ return 0;
+
+ return mbc->usb_online;
+}
+EXPORT_SYMBOL_GPL(pcf50633_mbc_get_usb_online_status);
+
+static ssize_t
+show_chgmode(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct pcf50633_mbc *mbc = dev_get_drvdata(dev);
+
+ u8 mbcs2 = pcf50633_reg_read(mbc->pcf, PCF50633_REG_MBCS2);
+ u8 chgmod = (mbcs2 & PCF50633_MBCS2_MBC_MASK);
+
+ return sprintf(buf, "%d\n", chgmod);
+}
+static DEVICE_ATTR(chgmode, S_IRUGO, show_chgmode, NULL);
+
+static ssize_t
+show_usblim(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct pcf50633_mbc *mbc = dev_get_drvdata(dev);
+ u8 usblim = pcf50633_reg_read(mbc->pcf, PCF50633_REG_MBCC7) &
+ PCF50633_MBCC7_USB_MASK;
+ unsigned int ma;
+
+ if (usblim == PCF50633_MBCC7_USB_1000mA)
+ ma = 1000;
+ else if (usblim == PCF50633_MBCC7_USB_500mA)
+ ma = 500;
+ else if (usblim == PCF50633_MBCC7_USB_100mA)
+ ma = 100;
+ else
+ ma = 0;
+
+ return sprintf(buf, "%u\n", ma);
+}
+
+static ssize_t set_usblim(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t count)
+{
+ struct pcf50633_mbc *mbc = dev_get_drvdata(dev);
+ unsigned long ma;
+ int ret;
+
+ ret = kstrtoul(buf, 10, &ma);
+ if (ret)
+ return ret;
+
+ pcf50633_mbc_usb_curlim_set(mbc->pcf, ma);
+
+ return count;
+}
+
+static DEVICE_ATTR(usb_curlim, S_IRUGO | S_IWUSR, show_usblim, set_usblim);
+
+static ssize_t
+show_chglim(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct pcf50633_mbc *mbc = dev_get_drvdata(dev);
+ u8 mbcc5 = pcf50633_reg_read(mbc->pcf, PCF50633_REG_MBCC5);
+ unsigned int ma;
+
+ if (!mbc->pcf->pdata->charger_reference_current_ma)
+ return -ENODEV;
+
+ ma = (mbc->pcf->pdata->charger_reference_current_ma * mbcc5) >> 8;
+
+ return sprintf(buf, "%u\n", ma);
+}
+
+static ssize_t set_chglim(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t count)
+{
+ struct pcf50633_mbc *mbc = dev_get_drvdata(dev);
+ unsigned long ma;
+ unsigned int mbcc5;
+ int ret;
+
+ if (!mbc->pcf->pdata->charger_reference_current_ma)
+ return -ENODEV;
+
+ ret = kstrtoul(buf, 10, &ma);
+ if (ret)
+ return ret;
+
+ mbcc5 = (ma << 8) / mbc->pcf->pdata->charger_reference_current_ma;
+ if (mbcc5 > 255)
+ mbcc5 = 255;
+ pcf50633_reg_write(mbc->pcf, PCF50633_REG_MBCC5, mbcc5);
+
+ return count;
+}
+
+/*
+ * This attribute allows to change MBC charging limit on the fly
+ * independently of usb current limit. It also gets set automatically every
+ * time usb current limit is changed.
+ */
+static DEVICE_ATTR(chg_curlim, S_IRUGO | S_IWUSR, show_chglim, set_chglim);
+
+static struct attribute *pcf50633_mbc_sysfs_attrs[] = {
+ &dev_attr_chgmode.attr,
+ &dev_attr_usb_curlim.attr,
+ &dev_attr_chg_curlim.attr,
+ NULL,
+};
+
+ATTRIBUTE_GROUPS(pcf50633_mbc_sysfs);
+
+static void
+pcf50633_mbc_irq_handler(int irq, void *data)
+{
+ struct pcf50633_mbc *mbc = data;
+
+ /* USB */
+ if (irq == PCF50633_IRQ_USBINS) {
+ mbc->usb_online = 1;
+ } else if (irq == PCF50633_IRQ_USBREM) {
+ mbc->usb_online = 0;
+ pcf50633_mbc_usb_curlim_set(mbc->pcf, 0);
+ }
+
+ /* Adapter */
+ if (irq == PCF50633_IRQ_ADPINS)
+ mbc->adapter_online = 1;
+ else if (irq == PCF50633_IRQ_ADPREM)
+ mbc->adapter_online = 0;
+
+ power_supply_changed(mbc->ac);
+ power_supply_changed(mbc->usb);
+ power_supply_changed(mbc->adapter);
+
+ if (mbc->pcf->pdata->mbc_event_callback)
+ mbc->pcf->pdata->mbc_event_callback(mbc->pcf, irq);
+}
+
+static int adapter_get_property(struct power_supply *psy,
+ enum power_supply_property psp,
+ union power_supply_propval *val)
+{
+ struct pcf50633_mbc *mbc = power_supply_get_drvdata(psy);
+ int ret = 0;
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_ONLINE:
+ val->intval = mbc->adapter_online;
+ break;
+ default:
+ ret = -EINVAL;
+ break;
+ }
+ return ret;
+}
+
+static int usb_get_property(struct power_supply *psy,
+ enum power_supply_property psp,
+ union power_supply_propval *val)
+{
+ struct pcf50633_mbc *mbc = power_supply_get_drvdata(psy);
+ int ret = 0;
+ u8 usblim = pcf50633_reg_read(mbc->pcf, PCF50633_REG_MBCC7) &
+ PCF50633_MBCC7_USB_MASK;
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_ONLINE:
+ val->intval = mbc->usb_online &&
+ (usblim <= PCF50633_MBCC7_USB_500mA);
+ break;
+ default:
+ ret = -EINVAL;
+ break;
+ }
+ return ret;
+}
+
+static int ac_get_property(struct power_supply *psy,
+ enum power_supply_property psp,
+ union power_supply_propval *val)
+{
+ struct pcf50633_mbc *mbc = power_supply_get_drvdata(psy);
+ int ret = 0;
+ u8 usblim = pcf50633_reg_read(mbc->pcf, PCF50633_REG_MBCC7) &
+ PCF50633_MBCC7_USB_MASK;
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_ONLINE:
+ val->intval = mbc->usb_online &&
+ (usblim == PCF50633_MBCC7_USB_1000mA);
+ break;
+ default:
+ ret = -EINVAL;
+ break;
+ }
+ return ret;
+}
+
+static enum power_supply_property power_props[] = {
+ POWER_SUPPLY_PROP_ONLINE,
+};
+
+static const u8 mbc_irq_handlers[] = {
+ PCF50633_IRQ_ADPINS,
+ PCF50633_IRQ_ADPREM,
+ PCF50633_IRQ_USBINS,
+ PCF50633_IRQ_USBREM,
+ PCF50633_IRQ_BATFULL,
+ PCF50633_IRQ_CHGHALT,
+ PCF50633_IRQ_THLIMON,
+ PCF50633_IRQ_THLIMOFF,
+ PCF50633_IRQ_USBLIMON,
+ PCF50633_IRQ_USBLIMOFF,
+ PCF50633_IRQ_LOWSYS,
+ PCF50633_IRQ_LOWBAT,
+};
+
+static const struct power_supply_desc pcf50633_mbc_adapter_desc = {
+ .name = "adapter",
+ .type = POWER_SUPPLY_TYPE_MAINS,
+ .properties = power_props,
+ .num_properties = ARRAY_SIZE(power_props),
+ .get_property = &adapter_get_property,
+};
+
+static const struct power_supply_desc pcf50633_mbc_usb_desc = {
+ .name = "usb",
+ .type = POWER_SUPPLY_TYPE_USB,
+ .properties = power_props,
+ .num_properties = ARRAY_SIZE(power_props),
+ .get_property = usb_get_property,
+};
+
+static const struct power_supply_desc pcf50633_mbc_ac_desc = {
+ .name = "ac",
+ .type = POWER_SUPPLY_TYPE_MAINS,
+ .properties = power_props,
+ .num_properties = ARRAY_SIZE(power_props),
+ .get_property = ac_get_property,
+};
+
+static int pcf50633_mbc_probe(struct platform_device *pdev)
+{
+ struct power_supply_config psy_cfg = {};
+ struct power_supply_config usb_psy_cfg;
+ struct pcf50633_mbc *mbc;
+ int i;
+ u8 mbcs1;
+
+ mbc = devm_kzalloc(&pdev->dev, sizeof(*mbc), GFP_KERNEL);
+ if (!mbc)
+ return -ENOMEM;
+
+ platform_set_drvdata(pdev, mbc);
+ mbc->pcf = dev_to_pcf50633(pdev->dev.parent);
+
+ /* Set up IRQ handlers */
+ for (i = 0; i < ARRAY_SIZE(mbc_irq_handlers); i++)
+ pcf50633_register_irq(mbc->pcf, mbc_irq_handlers[i],
+ pcf50633_mbc_irq_handler, mbc);
+
+ psy_cfg.supplied_to = mbc->pcf->pdata->batteries;
+ psy_cfg.num_supplicants = mbc->pcf->pdata->num_batteries;
+ psy_cfg.drv_data = mbc;
+
+ /* Create power supplies */
+ mbc->adapter = power_supply_register(&pdev->dev,
+ &pcf50633_mbc_adapter_desc,
+ &psy_cfg);
+ if (IS_ERR(mbc->adapter)) {
+ dev_err(mbc->pcf->dev, "failed to register adapter\n");
+ return PTR_ERR(mbc->adapter);
+ }
+
+ usb_psy_cfg = psy_cfg;
+ usb_psy_cfg.attr_grp = pcf50633_mbc_sysfs_groups;
+
+ mbc->usb = power_supply_register(&pdev->dev, &pcf50633_mbc_usb_desc,
+ &usb_psy_cfg);
+ if (IS_ERR(mbc->usb)) {
+ dev_err(mbc->pcf->dev, "failed to register usb\n");
+ power_supply_unregister(mbc->adapter);
+ return PTR_ERR(mbc->usb);
+ }
+
+ mbc->ac = power_supply_register(&pdev->dev, &pcf50633_mbc_ac_desc,
+ &psy_cfg);
+ if (IS_ERR(mbc->ac)) {
+ dev_err(mbc->pcf->dev, "failed to register ac\n");
+ power_supply_unregister(mbc->adapter);
+ power_supply_unregister(mbc->usb);
+ return PTR_ERR(mbc->ac);
+ }
+
+ mbcs1 = pcf50633_reg_read(mbc->pcf, PCF50633_REG_MBCS1);
+ if (mbcs1 & PCF50633_MBCS1_USBPRES)
+ pcf50633_mbc_irq_handler(PCF50633_IRQ_USBINS, mbc);
+ if (mbcs1 & PCF50633_MBCS1_ADAPTPRES)
+ pcf50633_mbc_irq_handler(PCF50633_IRQ_ADPINS, mbc);
+
+ return 0;
+}
+
+static int pcf50633_mbc_remove(struct platform_device *pdev)
+{
+ struct pcf50633_mbc *mbc = platform_get_drvdata(pdev);
+ int i;
+
+ /* Remove IRQ handlers */
+ for (i = 0; i < ARRAY_SIZE(mbc_irq_handlers); i++)
+ pcf50633_free_irq(mbc->pcf, mbc_irq_handlers[i]);
+
+ power_supply_unregister(mbc->usb);
+ power_supply_unregister(mbc->adapter);
+ power_supply_unregister(mbc->ac);
+
+ return 0;
+}
+
+static struct platform_driver pcf50633_mbc_driver = {
+ .driver = {
+ .name = "pcf50633-mbc",
+ },
+ .probe = pcf50633_mbc_probe,
+ .remove = pcf50633_mbc_remove,
+};
+
+module_platform_driver(pcf50633_mbc_driver);
+
+MODULE_AUTHOR("Balaji Rao <balajirrao@openmoko.org>");
+MODULE_DESCRIPTION("PCF50633 mbc driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:pcf50633-mbc");
diff --git a/drivers/power/supply/pda_power.c b/drivers/power/supply/pda_power.c
new file mode 100644
index 000000000..03a37fd6b
--- /dev/null
+++ b/drivers/power/supply/pda_power.c
@@ -0,0 +1,520 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Common power driver for PDAs and phones with one or two external
+ * power supplies (AC/USB) connected to main and backup batteries,
+ * and optional builtin charger.
+ *
+ * Copyright © 2007 Anton Vorontsov <cbou@mail.ru>
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/err.h>
+#include <linux/interrupt.h>
+#include <linux/notifier.h>
+#include <linux/power_supply.h>
+#include <linux/pda_power.h>
+#include <linux/regulator/consumer.h>
+#include <linux/timer.h>
+#include <linux/jiffies.h>
+#include <linux/usb/otg.h>
+
+static inline unsigned int get_irq_flags(struct resource *res)
+{
+ return IRQF_SHARED | (res->flags & IRQF_TRIGGER_MASK);
+}
+
+static struct device *dev;
+static struct pda_power_pdata *pdata;
+static struct resource *ac_irq, *usb_irq;
+static struct delayed_work charger_work;
+static struct delayed_work polling_work;
+static struct delayed_work supply_work;
+static int polling;
+static struct power_supply *pda_psy_ac, *pda_psy_usb;
+
+#if IS_ENABLED(CONFIG_USB_PHY)
+static struct usb_phy *transceiver;
+static struct notifier_block otg_nb;
+#endif
+
+static struct regulator *ac_draw;
+
+enum {
+ PDA_PSY_OFFLINE = 0,
+ PDA_PSY_ONLINE = 1,
+ PDA_PSY_TO_CHANGE,
+};
+static int new_ac_status = -1;
+static int new_usb_status = -1;
+static int ac_status = -1;
+static int usb_status = -1;
+
+static int pda_power_get_property(struct power_supply *psy,
+ enum power_supply_property psp,
+ union power_supply_propval *val)
+{
+ switch (psp) {
+ case POWER_SUPPLY_PROP_ONLINE:
+ if (psy->desc->type == POWER_SUPPLY_TYPE_MAINS)
+ val->intval = pdata->is_ac_online ?
+ pdata->is_ac_online() : 0;
+ else
+ val->intval = pdata->is_usb_online ?
+ pdata->is_usb_online() : 0;
+ break;
+ default:
+ return -EINVAL;
+ }
+ return 0;
+}
+
+static enum power_supply_property pda_power_props[] = {
+ POWER_SUPPLY_PROP_ONLINE,
+};
+
+static char *pda_power_supplied_to[] = {
+ "main-battery",
+ "backup-battery",
+};
+
+static const struct power_supply_desc pda_psy_ac_desc = {
+ .name = "ac",
+ .type = POWER_SUPPLY_TYPE_MAINS,
+ .properties = pda_power_props,
+ .num_properties = ARRAY_SIZE(pda_power_props),
+ .get_property = pda_power_get_property,
+};
+
+static const struct power_supply_desc pda_psy_usb_desc = {
+ .name = "usb",
+ .type = POWER_SUPPLY_TYPE_USB,
+ .properties = pda_power_props,
+ .num_properties = ARRAY_SIZE(pda_power_props),
+ .get_property = pda_power_get_property,
+};
+
+static void update_status(void)
+{
+ if (pdata->is_ac_online)
+ new_ac_status = !!pdata->is_ac_online();
+
+ if (pdata->is_usb_online)
+ new_usb_status = !!pdata->is_usb_online();
+}
+
+static void update_charger(void)
+{
+ static int regulator_enabled;
+ int max_uA = pdata->ac_max_uA;
+
+ if (pdata->set_charge) {
+ if (new_ac_status > 0) {
+ dev_dbg(dev, "charger on (AC)\n");
+ pdata->set_charge(PDA_POWER_CHARGE_AC);
+ } else if (new_usb_status > 0) {
+ dev_dbg(dev, "charger on (USB)\n");
+ pdata->set_charge(PDA_POWER_CHARGE_USB);
+ } else {
+ dev_dbg(dev, "charger off\n");
+ pdata->set_charge(0);
+ }
+ } else if (ac_draw) {
+ if (new_ac_status > 0) {
+ regulator_set_current_limit(ac_draw, max_uA, max_uA);
+ if (!regulator_enabled) {
+ dev_dbg(dev, "charger on (AC)\n");
+ WARN_ON(regulator_enable(ac_draw));
+ regulator_enabled = 1;
+ }
+ } else {
+ if (regulator_enabled) {
+ dev_dbg(dev, "charger off\n");
+ WARN_ON(regulator_disable(ac_draw));
+ regulator_enabled = 0;
+ }
+ }
+ }
+}
+
+static void supply_work_func(struct work_struct *work)
+{
+ if (ac_status == PDA_PSY_TO_CHANGE) {
+ ac_status = new_ac_status;
+ power_supply_changed(pda_psy_ac);
+ }
+
+ if (usb_status == PDA_PSY_TO_CHANGE) {
+ usb_status = new_usb_status;
+ power_supply_changed(pda_psy_usb);
+ }
+}
+
+static void psy_changed(void)
+{
+ update_charger();
+
+ /*
+ * Okay, charger set. Now wait a bit before notifying supplicants,
+ * charge power should stabilize.
+ */
+ cancel_delayed_work(&supply_work);
+ schedule_delayed_work(&supply_work,
+ msecs_to_jiffies(pdata->wait_for_charger));
+}
+
+static void charger_work_func(struct work_struct *work)
+{
+ update_status();
+ psy_changed();
+}
+
+static irqreturn_t power_changed_isr(int irq, void *power_supply)
+{
+ if (power_supply == pda_psy_ac)
+ ac_status = PDA_PSY_TO_CHANGE;
+ else if (power_supply == pda_psy_usb)
+ usb_status = PDA_PSY_TO_CHANGE;
+ else
+ return IRQ_NONE;
+
+ /*
+ * Wait a bit before reading ac/usb line status and setting charger,
+ * because ac/usb status readings may lag from irq.
+ */
+ cancel_delayed_work(&charger_work);
+ schedule_delayed_work(&charger_work,
+ msecs_to_jiffies(pdata->wait_for_status));
+
+ return IRQ_HANDLED;
+}
+
+static void polling_work_func(struct work_struct *work)
+{
+ int changed = 0;
+
+ dev_dbg(dev, "polling...\n");
+
+ update_status();
+
+ if (!ac_irq && new_ac_status != ac_status) {
+ ac_status = PDA_PSY_TO_CHANGE;
+ changed = 1;
+ }
+
+ if (!usb_irq && new_usb_status != usb_status) {
+ usb_status = PDA_PSY_TO_CHANGE;
+ changed = 1;
+ }
+
+ if (changed)
+ psy_changed();
+
+ cancel_delayed_work(&polling_work);
+ schedule_delayed_work(&polling_work,
+ msecs_to_jiffies(pdata->polling_interval));
+}
+
+#if IS_ENABLED(CONFIG_USB_PHY)
+static int otg_is_usb_online(void)
+{
+ return (transceiver->last_event == USB_EVENT_VBUS ||
+ transceiver->last_event == USB_EVENT_ENUMERATED);
+}
+
+static int otg_is_ac_online(void)
+{
+ return (transceiver->last_event == USB_EVENT_CHARGER);
+}
+
+static int otg_handle_notification(struct notifier_block *nb,
+ unsigned long event, void *unused)
+{
+ switch (event) {
+ case USB_EVENT_CHARGER:
+ ac_status = PDA_PSY_TO_CHANGE;
+ break;
+ case USB_EVENT_VBUS:
+ case USB_EVENT_ENUMERATED:
+ usb_status = PDA_PSY_TO_CHANGE;
+ break;
+ case USB_EVENT_NONE:
+ ac_status = PDA_PSY_TO_CHANGE;
+ usb_status = PDA_PSY_TO_CHANGE;
+ break;
+ default:
+ return NOTIFY_OK;
+ }
+
+ /*
+ * Wait a bit before reading ac/usb line status and setting charger,
+ * because ac/usb status readings may lag from irq.
+ */
+ cancel_delayed_work(&charger_work);
+ schedule_delayed_work(&charger_work,
+ msecs_to_jiffies(pdata->wait_for_status));
+
+ return NOTIFY_OK;
+}
+#endif
+
+static int pda_power_probe(struct platform_device *pdev)
+{
+ struct power_supply_config psy_cfg = {};
+ int ret = 0;
+
+ dev = &pdev->dev;
+
+ if (pdev->id != -1) {
+ dev_err(dev, "it's meaningless to register several "
+ "pda_powers; use id = -1\n");
+ ret = -EINVAL;
+ goto wrongid;
+ }
+
+ pdata = pdev->dev.platform_data;
+
+ if (pdata->init) {
+ ret = pdata->init(dev);
+ if (ret < 0)
+ goto init_failed;
+ }
+
+ ac_draw = regulator_get(dev, "ac_draw");
+ if (IS_ERR(ac_draw)) {
+ dev_dbg(dev, "couldn't get ac_draw regulator\n");
+ ac_draw = NULL;
+ }
+
+ update_status();
+ update_charger();
+
+ if (!pdata->wait_for_status)
+ pdata->wait_for_status = 500;
+
+ if (!pdata->wait_for_charger)
+ pdata->wait_for_charger = 500;
+
+ if (!pdata->polling_interval)
+ pdata->polling_interval = 2000;
+
+ if (!pdata->ac_max_uA)
+ pdata->ac_max_uA = 500000;
+
+ INIT_DELAYED_WORK(&charger_work, charger_work_func);
+ INIT_DELAYED_WORK(&supply_work, supply_work_func);
+
+ ac_irq = platform_get_resource_byname(pdev, IORESOURCE_IRQ, "ac");
+ usb_irq = platform_get_resource_byname(pdev, IORESOURCE_IRQ, "usb");
+
+ if (pdata->supplied_to) {
+ psy_cfg.supplied_to = pdata->supplied_to;
+ psy_cfg.num_supplicants = pdata->num_supplicants;
+ } else {
+ psy_cfg.supplied_to = pda_power_supplied_to;
+ psy_cfg.num_supplicants = ARRAY_SIZE(pda_power_supplied_to);
+ }
+
+#if IS_ENABLED(CONFIG_USB_PHY)
+ transceiver = usb_get_phy(USB_PHY_TYPE_USB2);
+ if (!IS_ERR_OR_NULL(transceiver)) {
+ if (!pdata->is_usb_online)
+ pdata->is_usb_online = otg_is_usb_online;
+ if (!pdata->is_ac_online)
+ pdata->is_ac_online = otg_is_ac_online;
+ }
+#endif
+
+ if (pdata->is_ac_online) {
+ pda_psy_ac = power_supply_register(&pdev->dev,
+ &pda_psy_ac_desc, &psy_cfg);
+ if (IS_ERR(pda_psy_ac)) {
+ dev_err(dev, "failed to register %s power supply\n",
+ pda_psy_ac_desc.name);
+ ret = PTR_ERR(pda_psy_ac);
+ goto ac_supply_failed;
+ }
+
+ if (ac_irq) {
+ ret = request_irq(ac_irq->start, power_changed_isr,
+ get_irq_flags(ac_irq), ac_irq->name,
+ pda_psy_ac);
+ if (ret) {
+ dev_err(dev, "request ac irq failed\n");
+ goto ac_irq_failed;
+ }
+ } else {
+ polling = 1;
+ }
+ }
+
+ if (pdata->is_usb_online) {
+ pda_psy_usb = power_supply_register(&pdev->dev,
+ &pda_psy_usb_desc,
+ &psy_cfg);
+ if (IS_ERR(pda_psy_usb)) {
+ dev_err(dev, "failed to register %s power supply\n",
+ pda_psy_usb_desc.name);
+ ret = PTR_ERR(pda_psy_usb);
+ goto usb_supply_failed;
+ }
+
+ if (usb_irq) {
+ ret = request_irq(usb_irq->start, power_changed_isr,
+ get_irq_flags(usb_irq),
+ usb_irq->name, pda_psy_usb);
+ if (ret) {
+ dev_err(dev, "request usb irq failed\n");
+ goto usb_irq_failed;
+ }
+ } else {
+ polling = 1;
+ }
+ }
+
+#if IS_ENABLED(CONFIG_USB_PHY)
+ if (!IS_ERR_OR_NULL(transceiver) && pdata->use_otg_notifier) {
+ otg_nb.notifier_call = otg_handle_notification;
+ ret = usb_register_notifier(transceiver, &otg_nb);
+ if (ret) {
+ dev_err(dev, "failure to register otg notifier\n");
+ goto otg_reg_notifier_failed;
+ }
+ polling = 0;
+ }
+#endif
+
+ if (polling) {
+ dev_dbg(dev, "will poll for status\n");
+ INIT_DELAYED_WORK(&polling_work, polling_work_func);
+ cancel_delayed_work(&polling_work);
+ schedule_delayed_work(&polling_work,
+ msecs_to_jiffies(pdata->polling_interval));
+ }
+
+ if (ac_irq || usb_irq)
+ device_init_wakeup(&pdev->dev, 1);
+
+ return 0;
+
+#if IS_ENABLED(CONFIG_USB_PHY)
+otg_reg_notifier_failed:
+ if (pdata->is_usb_online && usb_irq)
+ free_irq(usb_irq->start, pda_psy_usb);
+#endif
+usb_irq_failed:
+ if (pdata->is_usb_online)
+ power_supply_unregister(pda_psy_usb);
+usb_supply_failed:
+ if (pdata->is_ac_online && ac_irq)
+ free_irq(ac_irq->start, pda_psy_ac);
+#if IS_ENABLED(CONFIG_USB_PHY)
+ if (!IS_ERR_OR_NULL(transceiver))
+ usb_put_phy(transceiver);
+#endif
+ac_irq_failed:
+ if (pdata->is_ac_online)
+ power_supply_unregister(pda_psy_ac);
+ac_supply_failed:
+ if (ac_draw) {
+ regulator_put(ac_draw);
+ ac_draw = NULL;
+ }
+ if (pdata->exit)
+ pdata->exit(dev);
+init_failed:
+wrongid:
+ return ret;
+}
+
+static int pda_power_remove(struct platform_device *pdev)
+{
+#if IS_ENABLED(CONFIG_USB_PHY)
+ if (!IS_ERR_OR_NULL(transceiver) && pdata->use_otg_notifier)
+ usb_unregister_notifier(transceiver, &otg_nb);
+#endif
+ if (pdata->is_usb_online && usb_irq)
+ free_irq(usb_irq->start, pda_psy_usb);
+ if (pdata->is_ac_online && ac_irq)
+ free_irq(ac_irq->start, pda_psy_ac);
+
+ if (polling)
+ cancel_delayed_work_sync(&polling_work);
+ cancel_delayed_work_sync(&charger_work);
+ cancel_delayed_work_sync(&supply_work);
+
+ if (pdata->is_usb_online)
+ power_supply_unregister(pda_psy_usb);
+ if (pdata->is_ac_online)
+ power_supply_unregister(pda_psy_ac);
+#if IS_ENABLED(CONFIG_USB_PHY)
+ if (!IS_ERR_OR_NULL(transceiver))
+ usb_put_phy(transceiver);
+#endif
+ if (ac_draw) {
+ regulator_put(ac_draw);
+ ac_draw = NULL;
+ }
+ if (pdata->exit)
+ pdata->exit(dev);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int ac_wakeup_enabled;
+static int usb_wakeup_enabled;
+
+static int pda_power_suspend(struct platform_device *pdev, pm_message_t state)
+{
+ if (pdata->suspend) {
+ int ret = pdata->suspend(state);
+
+ if (ret)
+ return ret;
+ }
+
+ if (device_may_wakeup(&pdev->dev)) {
+ if (ac_irq)
+ ac_wakeup_enabled = !enable_irq_wake(ac_irq->start);
+ if (usb_irq)
+ usb_wakeup_enabled = !enable_irq_wake(usb_irq->start);
+ }
+
+ return 0;
+}
+
+static int pda_power_resume(struct platform_device *pdev)
+{
+ if (device_may_wakeup(&pdev->dev)) {
+ if (usb_irq && usb_wakeup_enabled)
+ disable_irq_wake(usb_irq->start);
+ if (ac_irq && ac_wakeup_enabled)
+ disable_irq_wake(ac_irq->start);
+ }
+
+ if (pdata->resume)
+ return pdata->resume();
+
+ return 0;
+}
+#else
+#define pda_power_suspend NULL
+#define pda_power_resume NULL
+#endif /* CONFIG_PM */
+
+static struct platform_driver pda_power_pdrv = {
+ .driver = {
+ .name = "pda-power",
+ },
+ .probe = pda_power_probe,
+ .remove = pda_power_remove,
+ .suspend = pda_power_suspend,
+ .resume = pda_power_resume,
+};
+
+module_platform_driver(pda_power_pdrv);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Anton Vorontsov <cbou@mail.ru>");
+MODULE_ALIAS("platform:pda-power");
diff --git a/drivers/power/supply/pm2301_charger.c b/drivers/power/supply/pm2301_charger.c
new file mode 100644
index 000000000..34f168f62
--- /dev/null
+++ b/drivers/power/supply/pm2301_charger.c
@@ -0,0 +1,1250 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright 2012 ST Ericsson.
+ *
+ * Power supply driver for ST Ericsson pm2xxx_charger charger
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/platform_device.h>
+#include <linux/power_supply.h>
+#include <linux/regulator/consumer.h>
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/workqueue.h>
+#include <linux/mfd/abx500/ab8500.h>
+#include <linux/mfd/abx500/ab8500-bm.h>
+#include <linux/mfd/abx500/ux500_chargalg.h>
+#include <linux/pm2301_charger.h>
+#include <linux/gpio.h>
+#include <linux/pm_runtime.h>
+#include <linux/pm.h>
+
+#include "pm2301_charger.h"
+
+#define to_pm2xxx_charger_ac_device_info(x) container_of((x), \
+ struct pm2xxx_charger, ac_chg)
+#define SLEEP_MIN 50
+#define SLEEP_MAX 100
+#define PM2XXX_AUTOSUSPEND_DELAY 500
+
+static int pm2xxx_interrupt_registers[] = {
+ PM2XXX_REG_INT1,
+ PM2XXX_REG_INT2,
+ PM2XXX_REG_INT3,
+ PM2XXX_REG_INT4,
+ PM2XXX_REG_INT5,
+ PM2XXX_REG_INT6,
+};
+
+static enum power_supply_property pm2xxx_charger_ac_props[] = {
+ POWER_SUPPLY_PROP_HEALTH,
+ POWER_SUPPLY_PROP_PRESENT,
+ POWER_SUPPLY_PROP_ONLINE,
+ POWER_SUPPLY_PROP_VOLTAGE_AVG,
+};
+
+static int pm2xxx_charger_voltage_map[] = {
+ 3500,
+ 3525,
+ 3550,
+ 3575,
+ 3600,
+ 3625,
+ 3650,
+ 3675,
+ 3700,
+ 3725,
+ 3750,
+ 3775,
+ 3800,
+ 3825,
+ 3850,
+ 3875,
+ 3900,
+ 3925,
+ 3950,
+ 3975,
+ 4000,
+ 4025,
+ 4050,
+ 4075,
+ 4100,
+ 4125,
+ 4150,
+ 4175,
+ 4200,
+ 4225,
+ 4250,
+ 4275,
+ 4300,
+};
+
+static int pm2xxx_charger_current_map[] = {
+ 200,
+ 200,
+ 400,
+ 600,
+ 800,
+ 1000,
+ 1200,
+ 1400,
+ 1600,
+ 1800,
+ 2000,
+ 2200,
+ 2400,
+ 2600,
+ 2800,
+ 3000,
+};
+
+static void set_lpn_pin(struct pm2xxx_charger *pm2)
+{
+ if (!pm2->ac.charger_connected && gpio_is_valid(pm2->lpn_pin)) {
+ gpio_set_value(pm2->lpn_pin, 1);
+ usleep_range(SLEEP_MIN, SLEEP_MAX);
+ }
+}
+
+static void clear_lpn_pin(struct pm2xxx_charger *pm2)
+{
+ if (!pm2->ac.charger_connected && gpio_is_valid(pm2->lpn_pin))
+ gpio_set_value(pm2->lpn_pin, 0);
+}
+
+static int pm2xxx_reg_read(struct pm2xxx_charger *pm2, int reg, u8 *val)
+{
+ int ret;
+
+ /* wake up the device */
+ pm_runtime_get_sync(pm2->dev);
+
+ ret = i2c_smbus_read_i2c_block_data(pm2->config.pm2xxx_i2c, reg,
+ 1, val);
+ if (ret < 0)
+ dev_err(pm2->dev, "Error reading register at 0x%x\n", reg);
+ else
+ ret = 0;
+
+ pm_runtime_put_sync(pm2->dev);
+
+ return ret;
+}
+
+static int pm2xxx_reg_write(struct pm2xxx_charger *pm2, int reg, u8 val)
+{
+ int ret;
+
+ /* wake up the device */
+ pm_runtime_get_sync(pm2->dev);
+
+ ret = i2c_smbus_write_i2c_block_data(pm2->config.pm2xxx_i2c, reg,
+ 1, &val);
+ if (ret < 0)
+ dev_err(pm2->dev, "Error writing register at 0x%x\n", reg);
+ else
+ ret = 0;
+
+ pm_runtime_put_sync(pm2->dev);
+
+ return ret;
+}
+
+static int pm2xxx_charging_enable_mngt(struct pm2xxx_charger *pm2)
+{
+ int ret;
+
+ /* Enable charging */
+ ret = pm2xxx_reg_write(pm2, PM2XXX_BATT_CTRL_REG2,
+ (PM2XXX_CH_AUTO_RESUME_EN | PM2XXX_CHARGER_ENA));
+
+ return ret;
+}
+
+static int pm2xxx_charging_disable_mngt(struct pm2xxx_charger *pm2)
+{
+ int ret;
+
+ /* Disable SW EOC ctrl */
+ ret = pm2xxx_reg_write(pm2, PM2XXX_SW_CTRL_REG, PM2XXX_SWCTRL_HW);
+ if (ret < 0) {
+ dev_err(pm2->dev, "%s pm2xxx write failed\n", __func__);
+ return ret;
+ }
+
+ /* Disable charging */
+ ret = pm2xxx_reg_write(pm2, PM2XXX_BATT_CTRL_REG2,
+ (PM2XXX_CH_AUTO_RESUME_DIS | PM2XXX_CHARGER_DIS));
+ if (ret < 0) {
+ dev_err(pm2->dev, "%s pm2xxx write failed\n", __func__);
+ return ret;
+ }
+
+ return 0;
+}
+
+static int pm2xxx_charger_batt_therm_mngt(struct pm2xxx_charger *pm2, int val)
+{
+ queue_work(pm2->charger_wq, &pm2->check_main_thermal_prot_work);
+
+ return 0;
+}
+
+
+static int pm2xxx_charger_die_therm_mngt(struct pm2xxx_charger *pm2, int val)
+{
+ queue_work(pm2->charger_wq, &pm2->check_main_thermal_prot_work);
+
+ return 0;
+}
+
+static int pm2xxx_charger_ovv_mngt(struct pm2xxx_charger *pm2, int val)
+{
+ dev_err(pm2->dev, "Overvoltage detected\n");
+ pm2->flags.ovv = true;
+ power_supply_changed(pm2->ac_chg.psy);
+
+ /* Schedule a new HW failure check */
+ queue_delayed_work(pm2->charger_wq, &pm2->check_hw_failure_work, 0);
+
+ return 0;
+}
+
+static int pm2xxx_charger_wd_exp_mngt(struct pm2xxx_charger *pm2, int val)
+{
+ dev_dbg(pm2->dev , "20 minutes watchdog expired\n");
+
+ pm2->ac.wd_expired = true;
+ power_supply_changed(pm2->ac_chg.psy);
+
+ return 0;
+}
+
+static int pm2xxx_charger_vbat_lsig_mngt(struct pm2xxx_charger *pm2, int val)
+{
+ int ret;
+
+ switch (val) {
+ case PM2XXX_INT1_ITVBATLOWR:
+ dev_dbg(pm2->dev, "VBAT grows above VBAT_LOW level\n");
+ /* Enable SW EOC ctrl */
+ ret = pm2xxx_reg_write(pm2, PM2XXX_SW_CTRL_REG,
+ PM2XXX_SWCTRL_SW);
+ if (ret < 0) {
+ dev_err(pm2->dev, "%s pm2xxx write failed\n", __func__);
+ return ret;
+ }
+ break;
+
+ case PM2XXX_INT1_ITVBATLOWF:
+ dev_dbg(pm2->dev, "VBAT drops below VBAT_LOW level\n");
+ /* Disable SW EOC ctrl */
+ ret = pm2xxx_reg_write(pm2, PM2XXX_SW_CTRL_REG,
+ PM2XXX_SWCTRL_HW);
+ if (ret < 0) {
+ dev_err(pm2->dev, "%s pm2xxx write failed\n", __func__);
+ return ret;
+ }
+ break;
+
+ default:
+ dev_err(pm2->dev, "Unknown VBAT level\n");
+ }
+
+ return 0;
+}
+
+static int pm2xxx_charger_bat_disc_mngt(struct pm2xxx_charger *pm2, int val)
+{
+ dev_dbg(pm2->dev, "battery disconnected\n");
+
+ return 0;
+}
+
+static int pm2xxx_charger_detection(struct pm2xxx_charger *pm2, u8 *val)
+{
+ int ret;
+
+ ret = pm2xxx_reg_read(pm2, PM2XXX_SRCE_REG_INT2, val);
+
+ if (ret < 0) {
+ dev_err(pm2->dev, "Charger detection failed\n");
+ goto out;
+ }
+
+ *val &= (PM2XXX_INT2_S_ITVPWR1PLUG | PM2XXX_INT2_S_ITVPWR2PLUG);
+
+out:
+ return ret;
+}
+
+static int pm2xxx_charger_itv_pwr_plug_mngt(struct pm2xxx_charger *pm2, int val)
+{
+
+ int ret;
+ u8 read_val;
+
+ /*
+ * Since we can't be sure that the events are received
+ * synchronously, we have the check if the main charger is
+ * connected by reading the interrupt source register.
+ */
+ ret = pm2xxx_charger_detection(pm2, &read_val);
+
+ if ((ret == 0) && read_val) {
+ pm2->ac.charger_connected = 1;
+ pm2->ac_conn = true;
+ queue_work(pm2->charger_wq, &pm2->ac_work);
+ }
+
+
+ return ret;
+}
+
+static int pm2xxx_charger_itv_pwr_unplug_mngt(struct pm2xxx_charger *pm2,
+ int val)
+{
+ pm2->ac.charger_connected = 0;
+ queue_work(pm2->charger_wq, &pm2->ac_work);
+
+ return 0;
+}
+
+static int pm2_int_reg0(void *pm2_data, int val)
+{
+ struct pm2xxx_charger *pm2 = pm2_data;
+ int ret = 0;
+
+ if (val & PM2XXX_INT1_ITVBATLOWR) {
+ ret = pm2xxx_charger_vbat_lsig_mngt(pm2,
+ PM2XXX_INT1_ITVBATLOWR);
+ if (ret < 0)
+ goto out;
+ }
+
+ if (val & PM2XXX_INT1_ITVBATLOWF) {
+ ret = pm2xxx_charger_vbat_lsig_mngt(pm2,
+ PM2XXX_INT1_ITVBATLOWF);
+ if (ret < 0)
+ goto out;
+ }
+
+ if (val & PM2XXX_INT1_ITVBATDISCONNECT) {
+ ret = pm2xxx_charger_bat_disc_mngt(pm2,
+ PM2XXX_INT1_ITVBATDISCONNECT);
+ if (ret < 0)
+ goto out;
+ }
+out:
+ return ret;
+}
+
+static int pm2_int_reg1(void *pm2_data, int val)
+{
+ struct pm2xxx_charger *pm2 = pm2_data;
+ int ret = 0;
+
+ if (val & (PM2XXX_INT2_ITVPWR1PLUG | PM2XXX_INT2_ITVPWR2PLUG)) {
+ dev_dbg(pm2->dev , "Main charger plugged\n");
+ ret = pm2xxx_charger_itv_pwr_plug_mngt(pm2, val &
+ (PM2XXX_INT2_ITVPWR1PLUG | PM2XXX_INT2_ITVPWR2PLUG));
+ }
+
+ if (val &
+ (PM2XXX_INT2_ITVPWR1UNPLUG | PM2XXX_INT2_ITVPWR2UNPLUG)) {
+ dev_dbg(pm2->dev , "Main charger unplugged\n");
+ ret = pm2xxx_charger_itv_pwr_unplug_mngt(pm2, val &
+ (PM2XXX_INT2_ITVPWR1UNPLUG |
+ PM2XXX_INT2_ITVPWR2UNPLUG));
+ }
+
+ return ret;
+}
+
+static int pm2_int_reg2(void *pm2_data, int val)
+{
+ struct pm2xxx_charger *pm2 = pm2_data;
+ int ret = 0;
+
+ if (val & PM2XXX_INT3_ITAUTOTIMEOUTWD)
+ ret = pm2xxx_charger_wd_exp_mngt(pm2, val);
+
+ if (val & (PM2XXX_INT3_ITCHPRECHARGEWD |
+ PM2XXX_INT3_ITCHCCWD | PM2XXX_INT3_ITCHCVWD)) {
+ dev_dbg(pm2->dev,
+ "Watchdog occurred for precharge, CC and CV charge\n");
+ }
+
+ return ret;
+}
+
+static int pm2_int_reg3(void *pm2_data, int val)
+{
+ struct pm2xxx_charger *pm2 = pm2_data;
+ int ret = 0;
+
+ if (val & (PM2XXX_INT4_ITCHARGINGON)) {
+ dev_dbg(pm2->dev ,
+ "charging operation has started\n");
+ }
+
+ if (val & (PM2XXX_INT4_ITVRESUME)) {
+ dev_dbg(pm2->dev,
+ "battery discharged down to VResume threshold\n");
+ }
+
+ if (val & (PM2XXX_INT4_ITBATTFULL)) {
+ dev_dbg(pm2->dev , "battery fully detected\n");
+ }
+
+ if (val & (PM2XXX_INT4_ITCVPHASE)) {
+ dev_dbg(pm2->dev, "CV phase enter with 0.5C charging\n");
+ }
+
+ if (val & (PM2XXX_INT4_ITVPWR2OVV | PM2XXX_INT4_ITVPWR1OVV)) {
+ pm2->failure_case = VPWR_OVV;
+ ret = pm2xxx_charger_ovv_mngt(pm2, val &
+ (PM2XXX_INT4_ITVPWR2OVV | PM2XXX_INT4_ITVPWR1OVV));
+ dev_dbg(pm2->dev, "VPWR/VSYSTEM overvoltage detected\n");
+ }
+
+ if (val & (PM2XXX_INT4_S_ITBATTEMPCOLD |
+ PM2XXX_INT4_S_ITBATTEMPHOT)) {
+ ret = pm2xxx_charger_batt_therm_mngt(pm2, val &
+ (PM2XXX_INT4_S_ITBATTEMPCOLD |
+ PM2XXX_INT4_S_ITBATTEMPHOT));
+ dev_dbg(pm2->dev, "BTEMP is too Low/High\n");
+ }
+
+ return ret;
+}
+
+static int pm2_int_reg4(void *pm2_data, int val)
+{
+ struct pm2xxx_charger *pm2 = pm2_data;
+ int ret = 0;
+
+ if (val & PM2XXX_INT5_ITVSYSTEMOVV) {
+ pm2->failure_case = VSYSTEM_OVV;
+ ret = pm2xxx_charger_ovv_mngt(pm2, val &
+ PM2XXX_INT5_ITVSYSTEMOVV);
+ dev_dbg(pm2->dev, "VSYSTEM overvoltage detected\n");
+ }
+
+ if (val & (PM2XXX_INT5_ITTHERMALWARNINGFALL |
+ PM2XXX_INT5_ITTHERMALWARNINGRISE |
+ PM2XXX_INT5_ITTHERMALSHUTDOWNFALL |
+ PM2XXX_INT5_ITTHERMALSHUTDOWNRISE)) {
+ dev_dbg(pm2->dev, "BTEMP die temperature is too Low/High\n");
+ ret = pm2xxx_charger_die_therm_mngt(pm2, val &
+ (PM2XXX_INT5_ITTHERMALWARNINGFALL |
+ PM2XXX_INT5_ITTHERMALWARNINGRISE |
+ PM2XXX_INT5_ITTHERMALSHUTDOWNFALL |
+ PM2XXX_INT5_ITTHERMALSHUTDOWNRISE));
+ }
+
+ return ret;
+}
+
+static int pm2_int_reg5(void *pm2_data, int val)
+{
+ struct pm2xxx_charger *pm2 = pm2_data;
+ int ret = 0;
+
+ if (val & (PM2XXX_INT6_ITVPWR2DROP | PM2XXX_INT6_ITVPWR1DROP)) {
+ dev_dbg(pm2->dev, "VMPWR drop to VBAT level\n");
+ }
+
+ if (val & (PM2XXX_INT6_ITVPWR2VALIDRISE |
+ PM2XXX_INT6_ITVPWR1VALIDRISE |
+ PM2XXX_INT6_ITVPWR2VALIDFALL |
+ PM2XXX_INT6_ITVPWR1VALIDFALL)) {
+ dev_dbg(pm2->dev, "Falling/Rising edge on WPWR1/2\n");
+ }
+
+ return ret;
+}
+
+static irqreturn_t pm2xxx_irq_int(int irq, void *data)
+{
+ struct pm2xxx_charger *pm2 = data;
+ struct pm2xxx_interrupts *interrupt = pm2->pm2_int;
+ int i;
+
+ /* wake up the device */
+ pm_runtime_get_sync(pm2->dev);
+
+ do {
+ for (i = 0; i < PM2XXX_NUM_INT_REG; i++) {
+ pm2xxx_reg_read(pm2,
+ pm2xxx_interrupt_registers[i],
+ &(interrupt->reg[i]));
+
+ if (interrupt->reg[i] > 0)
+ interrupt->handler[i](pm2, interrupt->reg[i]);
+ }
+ } while (gpio_get_value(pm2->pdata->gpio_irq_number) == 0);
+
+ pm_runtime_mark_last_busy(pm2->dev);
+ pm_runtime_put_autosuspend(pm2->dev);
+
+ return IRQ_HANDLED;
+}
+
+static int pm2xxx_charger_get_ac_cv(struct pm2xxx_charger *pm2)
+{
+ int ret = 0;
+ u8 val;
+
+ if (pm2->ac.charger_connected && pm2->ac.charger_online) {
+
+ ret = pm2xxx_reg_read(pm2, PM2XXX_SRCE_REG_INT4, &val);
+ if (ret < 0) {
+ dev_err(pm2->dev, "%s pm2xxx read failed\n", __func__);
+ goto out;
+ }
+
+ if (val & PM2XXX_INT4_S_ITCVPHASE)
+ ret = PM2XXX_CONST_VOLT;
+ else
+ ret = PM2XXX_CONST_CURR;
+ }
+out:
+ return ret;
+}
+
+static int pm2xxx_current_to_regval(int curr)
+{
+ int i;
+
+ if (curr < pm2xxx_charger_current_map[0])
+ return 0;
+
+ for (i = 1; i < ARRAY_SIZE(pm2xxx_charger_current_map); i++) {
+ if (curr < pm2xxx_charger_current_map[i])
+ return (i - 1);
+ }
+
+ i = ARRAY_SIZE(pm2xxx_charger_current_map) - 1;
+ if (curr == pm2xxx_charger_current_map[i])
+ return i;
+ else
+ return -EINVAL;
+}
+
+static int pm2xxx_voltage_to_regval(int curr)
+{
+ int i;
+
+ if (curr < pm2xxx_charger_voltage_map[0])
+ return 0;
+
+ for (i = 1; i < ARRAY_SIZE(pm2xxx_charger_voltage_map); i++) {
+ if (curr < pm2xxx_charger_voltage_map[i])
+ return i - 1;
+ }
+
+ i = ARRAY_SIZE(pm2xxx_charger_voltage_map) - 1;
+ if (curr == pm2xxx_charger_voltage_map[i])
+ return i;
+ else
+ return -EINVAL;
+}
+
+static int pm2xxx_charger_update_charger_current(struct ux500_charger *charger,
+ int ich_out)
+{
+ int ret;
+ int curr_index;
+ struct pm2xxx_charger *pm2;
+ u8 val;
+
+ if (charger->psy->desc->type == POWER_SUPPLY_TYPE_MAINS)
+ pm2 = to_pm2xxx_charger_ac_device_info(charger);
+ else
+ return -ENXIO;
+
+ curr_index = pm2xxx_current_to_regval(ich_out);
+ if (curr_index < 0) {
+ dev_err(pm2->dev,
+ "Charger current too high, charging not started\n");
+ return -ENXIO;
+ }
+
+ ret = pm2xxx_reg_read(pm2, PM2XXX_BATT_CTRL_REG6, &val);
+ if (ret >= 0) {
+ val &= ~PM2XXX_DIR_CH_CC_CURRENT_MASK;
+ val |= curr_index;
+ ret = pm2xxx_reg_write(pm2, PM2XXX_BATT_CTRL_REG6, val);
+ if (ret < 0) {
+ dev_err(pm2->dev,
+ "%s write failed\n", __func__);
+ }
+ }
+ else
+ dev_err(pm2->dev, "%s read failed\n", __func__);
+
+ return ret;
+}
+
+static int pm2xxx_charger_ac_get_property(struct power_supply *psy,
+ enum power_supply_property psp,
+ union power_supply_propval *val)
+{
+ struct pm2xxx_charger *pm2;
+
+ pm2 = to_pm2xxx_charger_ac_device_info(psy_to_ux500_charger(psy));
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_HEALTH:
+ if (pm2->flags.mainextchnotok)
+ val->intval = POWER_SUPPLY_HEALTH_UNSPEC_FAILURE;
+ else if (pm2->ac.wd_expired)
+ val->intval = POWER_SUPPLY_HEALTH_DEAD;
+ else if (pm2->flags.main_thermal_prot)
+ val->intval = POWER_SUPPLY_HEALTH_OVERHEAT;
+ else if (pm2->flags.ovv)
+ val->intval = POWER_SUPPLY_HEALTH_OVERVOLTAGE;
+ else
+ val->intval = POWER_SUPPLY_HEALTH_GOOD;
+ break;
+ case POWER_SUPPLY_PROP_ONLINE:
+ val->intval = pm2->ac.charger_online;
+ break;
+ case POWER_SUPPLY_PROP_PRESENT:
+ val->intval = pm2->ac.charger_connected;
+ break;
+ case POWER_SUPPLY_PROP_VOLTAGE_AVG:
+ pm2->ac.cv_active = pm2xxx_charger_get_ac_cv(pm2);
+ val->intval = pm2->ac.cv_active;
+ break;
+ default:
+ return -EINVAL;
+ }
+ return 0;
+}
+
+static int pm2xxx_charging_init(struct pm2xxx_charger *pm2)
+{
+ int ret = 0;
+
+ /* enable CC and CV watchdog */
+ ret = pm2xxx_reg_write(pm2, PM2XXX_BATT_CTRL_REG3,
+ (PM2XXX_CH_WD_CV_PHASE_60MIN | PM2XXX_CH_WD_CC_PHASE_60MIN));
+ if( ret < 0)
+ return ret;
+
+ /* enable precharge watchdog */
+ ret = pm2xxx_reg_write(pm2, PM2XXX_BATT_CTRL_REG4,
+ PM2XXX_CH_WD_PRECH_PHASE_60MIN);
+
+ /* Disable auto timeout */
+ ret = pm2xxx_reg_write(pm2, PM2XXX_BATT_CTRL_REG5,
+ PM2XXX_CH_WD_AUTO_TIMEOUT_20MIN);
+
+ /*
+ * EOC current level = 100mA
+ * Precharge current level = 100mA
+ * CC current level = 1000mA
+ */
+ ret = pm2xxx_reg_write(pm2, PM2XXX_BATT_CTRL_REG6,
+ (PM2XXX_DIR_CH_CC_CURRENT_1000MA |
+ PM2XXX_CH_PRECH_CURRENT_100MA |
+ PM2XXX_CH_EOC_CURRENT_100MA));
+
+ /*
+ * recharge threshold = 3.8V
+ * Precharge to CC threshold = 2.9V
+ */
+ ret = pm2xxx_reg_write(pm2, PM2XXX_BATT_CTRL_REG7,
+ (PM2XXX_CH_PRECH_VOL_2_9 | PM2XXX_CH_VRESUME_VOL_3_8));
+
+ /* float voltage charger level = 4.2V */
+ ret = pm2xxx_reg_write(pm2, PM2XXX_BATT_CTRL_REG8,
+ PM2XXX_CH_VOLT_4_2);
+
+ /* Voltage drop between VBAT and VSYS in HW charging = 300mV */
+ ret = pm2xxx_reg_write(pm2, PM2XXX_BATT_CTRL_REG9,
+ (PM2XXX_CH_150MV_DROP_300MV | PM2XXX_CHARCHING_INFO_DIS |
+ PM2XXX_CH_CC_REDUCED_CURRENT_IDENT |
+ PM2XXX_CH_CC_MODEDROP_DIS));
+
+ /* Input charger level of over voltage = 10V */
+ ret = pm2xxx_reg_write(pm2, PM2XXX_INP_VOLT_VPWR2,
+ PM2XXX_VPWR2_OVV_10);
+ ret = pm2xxx_reg_write(pm2, PM2XXX_INP_VOLT_VPWR1,
+ PM2XXX_VPWR1_OVV_10);
+
+ /* Input charger drop */
+ ret = pm2xxx_reg_write(pm2, PM2XXX_INP_DROP_VPWR2,
+ (PM2XXX_VPWR2_HW_OPT_DIS | PM2XXX_VPWR2_VALID_DIS |
+ PM2XXX_VPWR2_DROP_DIS));
+ ret = pm2xxx_reg_write(pm2, PM2XXX_INP_DROP_VPWR1,
+ (PM2XXX_VPWR1_HW_OPT_DIS | PM2XXX_VPWR1_VALID_DIS |
+ PM2XXX_VPWR1_DROP_DIS));
+
+ /* Disable battery low monitoring */
+ ret = pm2xxx_reg_write(pm2, PM2XXX_BATT_LOW_LEV_COMP_REG,
+ PM2XXX_VBAT_LOW_MONITORING_ENA);
+
+ return ret;
+}
+
+static int pm2xxx_charger_ac_en(struct ux500_charger *charger,
+ int enable, int vset, int iset)
+{
+ int ret;
+ int volt_index;
+ int curr_index;
+ u8 val;
+
+ struct pm2xxx_charger *pm2 = to_pm2xxx_charger_ac_device_info(charger);
+
+ if (enable) {
+ if (!pm2->ac.charger_connected) {
+ dev_dbg(pm2->dev, "AC charger not connected\n");
+ return -ENXIO;
+ }
+
+ dev_dbg(pm2->dev, "Enable AC: %dmV %dmA\n", vset, iset);
+ if (!pm2->vddadc_en_ac) {
+ ret = regulator_enable(pm2->regu);
+ if (ret)
+ dev_warn(pm2->dev,
+ "Failed to enable vddadc regulator\n");
+ else
+ pm2->vddadc_en_ac = true;
+ }
+
+ ret = pm2xxx_charging_init(pm2);
+ if (ret < 0) {
+ dev_err(pm2->dev, "%s charging init failed\n",
+ __func__);
+ goto error_occured;
+ }
+
+ volt_index = pm2xxx_voltage_to_regval(vset);
+ curr_index = pm2xxx_current_to_regval(iset);
+
+ if (volt_index < 0 || curr_index < 0) {
+ dev_err(pm2->dev,
+ "Charger voltage or current too high, "
+ "charging not started\n");
+ return -ENXIO;
+ }
+
+ ret = pm2xxx_reg_read(pm2, PM2XXX_BATT_CTRL_REG8, &val);
+ if (ret < 0) {
+ dev_err(pm2->dev, "%s pm2xxx read failed\n", __func__);
+ goto error_occured;
+ }
+ val &= ~PM2XXX_CH_VOLT_MASK;
+ val |= volt_index;
+ ret = pm2xxx_reg_write(pm2, PM2XXX_BATT_CTRL_REG8, val);
+ if (ret < 0) {
+ dev_err(pm2->dev, "%s pm2xxx write failed\n", __func__);
+ goto error_occured;
+ }
+
+ ret = pm2xxx_reg_read(pm2, PM2XXX_BATT_CTRL_REG6, &val);
+ if (ret < 0) {
+ dev_err(pm2->dev, "%s pm2xxx read failed\n", __func__);
+ goto error_occured;
+ }
+ val &= ~PM2XXX_DIR_CH_CC_CURRENT_MASK;
+ val |= curr_index;
+ ret = pm2xxx_reg_write(pm2, PM2XXX_BATT_CTRL_REG6, val);
+ if (ret < 0) {
+ dev_err(pm2->dev, "%s pm2xxx write failed\n", __func__);
+ goto error_occured;
+ }
+
+ if (!pm2->bat->enable_overshoot) {
+ ret = pm2xxx_reg_read(pm2, PM2XXX_LED_CTRL_REG, &val);
+ if (ret < 0) {
+ dev_err(pm2->dev, "%s pm2xxx read failed\n",
+ __func__);
+ goto error_occured;
+ }
+ val |= PM2XXX_ANTI_OVERSHOOT_EN;
+ ret = pm2xxx_reg_write(pm2, PM2XXX_LED_CTRL_REG, val);
+ if (ret < 0) {
+ dev_err(pm2->dev, "%s pm2xxx write failed\n",
+ __func__);
+ goto error_occured;
+ }
+ }
+
+ ret = pm2xxx_charging_enable_mngt(pm2);
+ if (ret < 0) {
+ dev_err(pm2->dev, "Failed to enable"
+ "pm2xxx ac charger\n");
+ goto error_occured;
+ }
+
+ pm2->ac.charger_online = 1;
+ } else {
+ pm2->ac.charger_online = 0;
+ pm2->ac.wd_expired = false;
+
+ /* Disable regulator if enabled */
+ if (pm2->vddadc_en_ac) {
+ regulator_disable(pm2->regu);
+ pm2->vddadc_en_ac = false;
+ }
+
+ ret = pm2xxx_charging_disable_mngt(pm2);
+ if (ret < 0) {
+ dev_err(pm2->dev, "failed to disable"
+ "pm2xxx ac charger\n");
+ goto error_occured;
+ }
+
+ dev_dbg(pm2->dev, "PM2301: " "Disabled AC charging\n");
+ }
+ power_supply_changed(pm2->ac_chg.psy);
+
+error_occured:
+ return ret;
+}
+
+static int pm2xxx_charger_watchdog_kick(struct ux500_charger *charger)
+{
+ int ret;
+ struct pm2xxx_charger *pm2;
+
+ if (charger->psy->desc->type == POWER_SUPPLY_TYPE_MAINS)
+ pm2 = to_pm2xxx_charger_ac_device_info(charger);
+ else
+ return -ENXIO;
+
+ ret = pm2xxx_reg_write(pm2, PM2XXX_BATT_WD_KICK, WD_TIMER);
+ if (ret)
+ dev_err(pm2->dev, "Failed to kick WD!\n");
+
+ return ret;
+}
+
+static void pm2xxx_charger_ac_work(struct work_struct *work)
+{
+ struct pm2xxx_charger *pm2 = container_of(work,
+ struct pm2xxx_charger, ac_work);
+
+
+ power_supply_changed(pm2->ac_chg.psy);
+ sysfs_notify(&pm2->ac_chg.psy->dev.kobj, NULL, "present");
+};
+
+static void pm2xxx_charger_check_hw_failure_work(struct work_struct *work)
+{
+ u8 reg_value;
+
+ struct pm2xxx_charger *pm2 = container_of(work,
+ struct pm2xxx_charger, check_hw_failure_work.work);
+
+ if (pm2->flags.ovv) {
+ pm2xxx_reg_read(pm2, PM2XXX_SRCE_REG_INT4, &reg_value);
+
+ if (!(reg_value & (PM2XXX_INT4_S_ITVPWR1OVV |
+ PM2XXX_INT4_S_ITVPWR2OVV))) {
+ pm2->flags.ovv = false;
+ power_supply_changed(pm2->ac_chg.psy);
+ }
+ }
+
+ /* If we still have a failure, schedule a new check */
+ if (pm2->flags.ovv) {
+ queue_delayed_work(pm2->charger_wq,
+ &pm2->check_hw_failure_work, round_jiffies(HZ));
+ }
+}
+
+static void pm2xxx_charger_check_main_thermal_prot_work(
+ struct work_struct *work)
+{
+ int ret;
+ u8 val;
+
+ struct pm2xxx_charger *pm2 = container_of(work, struct pm2xxx_charger,
+ check_main_thermal_prot_work);
+
+ /* Check if die temp warning is still active */
+ ret = pm2xxx_reg_read(pm2, PM2XXX_SRCE_REG_INT5, &val);
+ if (ret < 0) {
+ dev_err(pm2->dev, "%s pm2xxx read failed\n", __func__);
+ return;
+ }
+ if (val & (PM2XXX_INT5_S_ITTHERMALWARNINGRISE
+ | PM2XXX_INT5_S_ITTHERMALSHUTDOWNRISE))
+ pm2->flags.main_thermal_prot = true;
+ else if (val & (PM2XXX_INT5_S_ITTHERMALWARNINGFALL
+ | PM2XXX_INT5_S_ITTHERMALSHUTDOWNFALL))
+ pm2->flags.main_thermal_prot = false;
+
+ power_supply_changed(pm2->ac_chg.psy);
+}
+
+static struct pm2xxx_interrupts pm2xxx_int = {
+ .handler[0] = pm2_int_reg0,
+ .handler[1] = pm2_int_reg1,
+ .handler[2] = pm2_int_reg2,
+ .handler[3] = pm2_int_reg3,
+ .handler[4] = pm2_int_reg4,
+ .handler[5] = pm2_int_reg5,
+};
+
+static struct pm2xxx_irq pm2xxx_charger_irq[] = {
+ {"PM2XXX_IRQ_INT", pm2xxx_irq_int},
+};
+
+static int __maybe_unused pm2xxx_wall_charger_resume(struct device *dev)
+{
+ struct i2c_client *i2c_client = to_i2c_client(dev);
+ struct pm2xxx_charger *pm2;
+
+ pm2 = (struct pm2xxx_charger *)i2c_get_clientdata(i2c_client);
+ set_lpn_pin(pm2);
+
+ /* If we still have a HW failure, schedule a new check */
+ if (pm2->flags.ovv)
+ queue_delayed_work(pm2->charger_wq,
+ &pm2->check_hw_failure_work, 0);
+
+ return 0;
+}
+
+static int __maybe_unused pm2xxx_wall_charger_suspend(struct device *dev)
+{
+ struct i2c_client *i2c_client = to_i2c_client(dev);
+ struct pm2xxx_charger *pm2;
+
+ pm2 = (struct pm2xxx_charger *)i2c_get_clientdata(i2c_client);
+ clear_lpn_pin(pm2);
+
+ /* Cancel any pending HW failure check */
+ if (delayed_work_pending(&pm2->check_hw_failure_work))
+ cancel_delayed_work(&pm2->check_hw_failure_work);
+
+ flush_work(&pm2->ac_work);
+ flush_work(&pm2->check_main_thermal_prot_work);
+
+ return 0;
+}
+
+static int __maybe_unused pm2xxx_runtime_suspend(struct device *dev)
+{
+ struct i2c_client *pm2xxx_i2c_client = to_i2c_client(dev);
+ struct pm2xxx_charger *pm2;
+
+ pm2 = (struct pm2xxx_charger *)i2c_get_clientdata(pm2xxx_i2c_client);
+ clear_lpn_pin(pm2);
+
+ return 0;
+}
+
+static int __maybe_unused pm2xxx_runtime_resume(struct device *dev)
+{
+ struct i2c_client *pm2xxx_i2c_client = to_i2c_client(dev);
+ struct pm2xxx_charger *pm2;
+
+ pm2 = (struct pm2xxx_charger *)i2c_get_clientdata(pm2xxx_i2c_client);
+
+ if (gpio_is_valid(pm2->lpn_pin) && gpio_get_value(pm2->lpn_pin) == 0)
+ set_lpn_pin(pm2);
+
+ return 0;
+}
+
+static const struct dev_pm_ops pm2xxx_pm_ops __maybe_unused = {
+ SET_SYSTEM_SLEEP_PM_OPS(pm2xxx_wall_charger_suspend,
+ pm2xxx_wall_charger_resume)
+ SET_RUNTIME_PM_OPS(pm2xxx_runtime_suspend, pm2xxx_runtime_resume, NULL)
+};
+
+static int pm2xxx_wall_charger_probe(struct i2c_client *i2c_client,
+ const struct i2c_device_id *id)
+{
+ struct pm2xxx_platform_data *pl_data = i2c_client->dev.platform_data;
+ struct power_supply_config psy_cfg = {};
+ struct pm2xxx_charger *pm2;
+ int ret = 0;
+ u8 val;
+ int i;
+
+ if (!pl_data) {
+ dev_err(&i2c_client->dev, "No platform data supplied\n");
+ return -EINVAL;
+ }
+
+ pm2 = kzalloc(sizeof(struct pm2xxx_charger), GFP_KERNEL);
+ if (!pm2) {
+ dev_err(&i2c_client->dev, "pm2xxx_charger allocation failed\n");
+ return -ENOMEM;
+ }
+
+ /* get parent data */
+ pm2->dev = &i2c_client->dev;
+
+ pm2->pm2_int = &pm2xxx_int;
+
+ /* get charger spcific platform data */
+ if (!pl_data->wall_charger) {
+ dev_err(pm2->dev, "no charger platform data supplied\n");
+ ret = -EINVAL;
+ goto free_device_info;
+ }
+
+ pm2->pdata = pl_data->wall_charger;
+
+ /* get battery specific platform data */
+ if (!pl_data->battery) {
+ dev_err(pm2->dev, "no battery platform data supplied\n");
+ ret = -EINVAL;
+ goto free_device_info;
+ }
+
+ pm2->bat = pl_data->battery;
+
+ if (!i2c_check_functionality(i2c_client->adapter,
+ I2C_FUNC_SMBUS_BYTE_DATA |
+ I2C_FUNC_SMBUS_READ_WORD_DATA)) {
+ ret = -ENODEV;
+ dev_info(pm2->dev, "pm2301 i2c_check_functionality failed\n");
+ goto free_device_info;
+ }
+
+ pm2->config.pm2xxx_i2c = i2c_client;
+ pm2->config.pm2xxx_id = (struct i2c_device_id *) id;
+ i2c_set_clientdata(i2c_client, pm2);
+
+ /* AC supply */
+ /* power_supply base class */
+ pm2->ac_chg_desc.name = pm2->pdata->label;
+ pm2->ac_chg_desc.type = POWER_SUPPLY_TYPE_MAINS;
+ pm2->ac_chg_desc.properties = pm2xxx_charger_ac_props;
+ pm2->ac_chg_desc.num_properties = ARRAY_SIZE(pm2xxx_charger_ac_props);
+ pm2->ac_chg_desc.get_property = pm2xxx_charger_ac_get_property;
+
+ psy_cfg.supplied_to = pm2->pdata->supplied_to;
+ psy_cfg.num_supplicants = pm2->pdata->num_supplicants;
+ /* pm2xxx_charger sub-class */
+ pm2->ac_chg.ops.enable = &pm2xxx_charger_ac_en;
+ pm2->ac_chg.ops.kick_wd = &pm2xxx_charger_watchdog_kick;
+ pm2->ac_chg.ops.update_curr = &pm2xxx_charger_update_charger_current;
+ pm2->ac_chg.max_out_volt = pm2xxx_charger_voltage_map[
+ ARRAY_SIZE(pm2xxx_charger_voltage_map) - 1];
+ pm2->ac_chg.max_out_curr = pm2xxx_charger_current_map[
+ ARRAY_SIZE(pm2xxx_charger_current_map) - 1];
+ pm2->ac_chg.wdt_refresh = WD_KICK_INTERVAL;
+ pm2->ac_chg.enabled = true;
+ pm2->ac_chg.external = true;
+
+ /* Create a work queue for the charger */
+ pm2->charger_wq = alloc_ordered_workqueue("pm2xxx_charger_wq",
+ WQ_MEM_RECLAIM);
+ if (pm2->charger_wq == NULL) {
+ ret = -ENOMEM;
+ dev_err(pm2->dev, "failed to create work queue\n");
+ goto free_device_info;
+ }
+
+ /* Init work for charger detection */
+ INIT_WORK(&pm2->ac_work, pm2xxx_charger_ac_work);
+
+ /* Init work for checking HW status */
+ INIT_WORK(&pm2->check_main_thermal_prot_work,
+ pm2xxx_charger_check_main_thermal_prot_work);
+
+ /* Init work for HW failure check */
+ INIT_DEFERRABLE_WORK(&pm2->check_hw_failure_work,
+ pm2xxx_charger_check_hw_failure_work);
+
+ /*
+ * VDD ADC supply needs to be enabled from this driver when there
+ * is a charger connected to avoid erroneous BTEMP_HIGH/LOW
+ * interrupts during charging
+ */
+ pm2->regu = regulator_get(pm2->dev, "vddadc");
+ if (IS_ERR(pm2->regu)) {
+ ret = PTR_ERR(pm2->regu);
+ dev_err(pm2->dev, "failed to get vddadc regulator\n");
+ goto free_charger_wq;
+ }
+
+ /* Register AC charger class */
+ pm2->ac_chg.psy = power_supply_register(pm2->dev, &pm2->ac_chg_desc,
+ &psy_cfg);
+ if (IS_ERR(pm2->ac_chg.psy)) {
+ dev_err(pm2->dev, "failed to register AC charger\n");
+ ret = PTR_ERR(pm2->ac_chg.psy);
+ goto free_regulator;
+ }
+
+ /* Register interrupts */
+ ret = request_threaded_irq(gpio_to_irq(pm2->pdata->gpio_irq_number),
+ NULL,
+ pm2xxx_charger_irq[0].isr,
+ pm2->pdata->irq_type | IRQF_ONESHOT,
+ pm2xxx_charger_irq[0].name, pm2);
+
+ if (ret != 0) {
+ dev_err(pm2->dev, "failed to request %s IRQ %d: %d\n",
+ pm2xxx_charger_irq[0].name,
+ gpio_to_irq(pm2->pdata->gpio_irq_number), ret);
+ goto unregister_pm2xxx_charger;
+ }
+
+ ret = pm_runtime_set_active(pm2->dev);
+ if (ret)
+ dev_err(pm2->dev, "set active Error\n");
+
+ pm_runtime_enable(pm2->dev);
+ pm_runtime_set_autosuspend_delay(pm2->dev, PM2XXX_AUTOSUSPEND_DELAY);
+ pm_runtime_use_autosuspend(pm2->dev);
+ pm_runtime_resume(pm2->dev);
+
+ /* pm interrupt can wake up system */
+ ret = enable_irq_wake(gpio_to_irq(pm2->pdata->gpio_irq_number));
+ if (ret) {
+ dev_err(pm2->dev, "failed to set irq wake\n");
+ goto unregister_pm2xxx_interrupt;
+ }
+
+ mutex_init(&pm2->lock);
+
+ if (gpio_is_valid(pm2->pdata->lpn_gpio)) {
+ /* get lpn GPIO from platform data */
+ pm2->lpn_pin = pm2->pdata->lpn_gpio;
+
+ /*
+ * Charger detection mechanism requires pulling up the LPN pin
+ * while i2c communication if Charger is not connected
+ * LPN pin of PM2301 is GPIO60 of AB9540
+ */
+ ret = gpio_request(pm2->lpn_pin, "pm2301_lpm_gpio");
+
+ if (ret < 0) {
+ dev_err(pm2->dev, "pm2301_lpm_gpio request failed\n");
+ goto disable_pm2_irq_wake;
+ }
+ ret = gpio_direction_output(pm2->lpn_pin, 0);
+ if (ret < 0) {
+ dev_err(pm2->dev, "pm2301_lpm_gpio direction failed\n");
+ goto free_gpio;
+ }
+ set_lpn_pin(pm2);
+ }
+
+ /* read interrupt registers */
+ for (i = 0; i < PM2XXX_NUM_INT_REG; i++)
+ pm2xxx_reg_read(pm2,
+ pm2xxx_interrupt_registers[i],
+ &val);
+
+ ret = pm2xxx_charger_detection(pm2, &val);
+
+ if ((ret == 0) && val) {
+ pm2->ac.charger_connected = 1;
+ ab8500_override_turn_on_stat(~AB8500_POW_KEY_1_ON,
+ AB8500_MAIN_CH_DET);
+ pm2->ac_conn = true;
+ power_supply_changed(pm2->ac_chg.psy);
+ sysfs_notify(&pm2->ac_chg.psy->dev.kobj, NULL, "present");
+ }
+
+ return 0;
+
+free_gpio:
+ if (gpio_is_valid(pm2->lpn_pin))
+ gpio_free(pm2->lpn_pin);
+disable_pm2_irq_wake:
+ disable_irq_wake(gpio_to_irq(pm2->pdata->gpio_irq_number));
+unregister_pm2xxx_interrupt:
+ /* disable interrupt */
+ free_irq(gpio_to_irq(pm2->pdata->gpio_irq_number), pm2);
+unregister_pm2xxx_charger:
+ /* unregister power supply */
+ power_supply_unregister(pm2->ac_chg.psy);
+free_regulator:
+ /* disable the regulator */
+ regulator_put(pm2->regu);
+free_charger_wq:
+ destroy_workqueue(pm2->charger_wq);
+free_device_info:
+ kfree(pm2);
+
+ return ret;
+}
+
+static int pm2xxx_wall_charger_remove(struct i2c_client *i2c_client)
+{
+ struct pm2xxx_charger *pm2 = i2c_get_clientdata(i2c_client);
+
+ /* Disable pm_runtime */
+ pm_runtime_disable(pm2->dev);
+ /* Disable AC charging */
+ pm2xxx_charger_ac_en(&pm2->ac_chg, false, 0, 0);
+
+ /* Disable wake by pm interrupt */
+ disable_irq_wake(gpio_to_irq(pm2->pdata->gpio_irq_number));
+
+ /* Disable interrupts */
+ free_irq(gpio_to_irq(pm2->pdata->gpio_irq_number), pm2);
+
+ /* Delete the work queue */
+ destroy_workqueue(pm2->charger_wq);
+
+ flush_scheduled_work();
+
+ /* disable the regulator */
+ regulator_put(pm2->regu);
+
+ power_supply_unregister(pm2->ac_chg.psy);
+
+ if (gpio_is_valid(pm2->lpn_pin))
+ gpio_free(pm2->lpn_pin);
+
+ kfree(pm2);
+
+ return 0;
+}
+
+static const struct i2c_device_id pm2xxx_id[] = {
+ { "pm2301", 0 },
+ { }
+};
+
+MODULE_DEVICE_TABLE(i2c, pm2xxx_id);
+
+static struct i2c_driver pm2xxx_charger_driver = {
+ .probe = pm2xxx_wall_charger_probe,
+ .remove = pm2xxx_wall_charger_remove,
+ .driver = {
+ .name = "pm2xxx-wall_charger",
+ .pm = IS_ENABLED(CONFIG_PM) ? &pm2xxx_pm_ops : NULL,
+ },
+ .id_table = pm2xxx_id,
+};
+
+static int __init pm2xxx_charger_init(void)
+{
+ return i2c_add_driver(&pm2xxx_charger_driver);
+}
+
+static void __exit pm2xxx_charger_exit(void)
+{
+ i2c_del_driver(&pm2xxx_charger_driver);
+}
+
+device_initcall_sync(pm2xxx_charger_init);
+module_exit(pm2xxx_charger_exit);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Rajkumar kasirajan, Olivier Launay");
+MODULE_DESCRIPTION("PM2xxx charger management driver");
diff --git a/drivers/power/supply/pm2301_charger.h b/drivers/power/supply/pm2301_charger.h
new file mode 100644
index 000000000..74397e377
--- /dev/null
+++ b/drivers/power/supply/pm2301_charger.h
@@ -0,0 +1,492 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) ST-Ericsson SA 2012
+ *
+ * PM2301 power supply interface
+ */
+
+#ifndef PM2301_CHARGER_H
+#define PM2301_CHARGER_H
+
+/* Watchdog timeout constant */
+#define WD_TIMER 0x30 /* 4min */
+#define WD_KICK_INTERVAL (30 * HZ)
+
+#define PM2XXX_NUM_INT_REG 0x6
+
+/* Constant voltage/current */
+#define PM2XXX_CONST_CURR 0x0
+#define PM2XXX_CONST_VOLT 0x1
+
+/* Lowest charger voltage is 3.39V -> 0x4E */
+#define LOW_VOLT_REG 0x4E
+
+#define PM2XXX_BATT_CTRL_REG1 0x00
+#define PM2XXX_BATT_CTRL_REG2 0x01
+#define PM2XXX_BATT_CTRL_REG3 0x02
+#define PM2XXX_BATT_CTRL_REG4 0x03
+#define PM2XXX_BATT_CTRL_REG5 0x04
+#define PM2XXX_BATT_CTRL_REG6 0x05
+#define PM2XXX_BATT_CTRL_REG7 0x06
+#define PM2XXX_BATT_CTRL_REG8 0x07
+#define PM2XXX_NTC_CTRL_REG1 0x08
+#define PM2XXX_NTC_CTRL_REG2 0x09
+#define PM2XXX_BATT_CTRL_REG9 0x0A
+#define PM2XXX_BATT_STAT_REG1 0x0B
+#define PM2XXX_INP_VOLT_VPWR2 0x11
+#define PM2XXX_INP_DROP_VPWR2 0x13
+#define PM2XXX_INP_VOLT_VPWR1 0x15
+#define PM2XXX_INP_DROP_VPWR1 0x17
+#define PM2XXX_INP_MODE_VPWR 0x18
+#define PM2XXX_BATT_WD_KICK 0x70
+#define PM2XXX_DEV_VER_STAT 0x0C
+#define PM2XXX_THERM_WARN_CTRL_REG 0x20
+#define PM2XXX_BATT_DISC_REG 0x21
+#define PM2XXX_BATT_LOW_LEV_COMP_REG 0x22
+#define PM2XXX_BATT_LOW_LEV_VAL_REG 0x23
+#define PM2XXX_I2C_PAD_CTRL_REG 0x24
+#define PM2XXX_SW_CTRL_REG 0x26
+#define PM2XXX_LED_CTRL_REG 0x28
+
+#define PM2XXX_REG_INT1 0x40
+#define PM2XXX_MASK_REG_INT1 0x50
+#define PM2XXX_SRCE_REG_INT1 0x60
+#define PM2XXX_REG_INT2 0x41
+#define PM2XXX_MASK_REG_INT2 0x51
+#define PM2XXX_SRCE_REG_INT2 0x61
+#define PM2XXX_REG_INT3 0x42
+#define PM2XXX_MASK_REG_INT3 0x52
+#define PM2XXX_SRCE_REG_INT3 0x62
+#define PM2XXX_REG_INT4 0x43
+#define PM2XXX_MASK_REG_INT4 0x53
+#define PM2XXX_SRCE_REG_INT4 0x63
+#define PM2XXX_REG_INT5 0x44
+#define PM2XXX_MASK_REG_INT5 0x54
+#define PM2XXX_SRCE_REG_INT5 0x64
+#define PM2XXX_REG_INT6 0x45
+#define PM2XXX_MASK_REG_INT6 0x55
+#define PM2XXX_SRCE_REG_INT6 0x65
+
+#define VPWR_OVV 0x0
+#define VSYSTEM_OVV 0x1
+
+/* control Reg 1 */
+#define PM2XXX_CH_RESUME_EN 0x1
+#define PM2XXX_CH_RESUME_DIS 0x0
+
+/* control Reg 2 */
+#define PM2XXX_CH_AUTO_RESUME_EN 0X2
+#define PM2XXX_CH_AUTO_RESUME_DIS 0X0
+#define PM2XXX_CHARGER_ENA 0x4
+#define PM2XXX_CHARGER_DIS 0x0
+
+/* control Reg 3 */
+#define PM2XXX_CH_WD_CC_PHASE_OFF 0x0
+#define PM2XXX_CH_WD_CC_PHASE_5MIN 0x1
+#define PM2XXX_CH_WD_CC_PHASE_10MIN 0x2
+#define PM2XXX_CH_WD_CC_PHASE_30MIN 0x3
+#define PM2XXX_CH_WD_CC_PHASE_60MIN 0x4
+#define PM2XXX_CH_WD_CC_PHASE_120MIN 0x5
+#define PM2XXX_CH_WD_CC_PHASE_240MIN 0x6
+#define PM2XXX_CH_WD_CC_PHASE_360MIN 0x7
+
+#define PM2XXX_CH_WD_CV_PHASE_OFF (0x0<<3)
+#define PM2XXX_CH_WD_CV_PHASE_5MIN (0x1<<3)
+#define PM2XXX_CH_WD_CV_PHASE_10MIN (0x2<<3)
+#define PM2XXX_CH_WD_CV_PHASE_30MIN (0x3<<3)
+#define PM2XXX_CH_WD_CV_PHASE_60MIN (0x4<<3)
+#define PM2XXX_CH_WD_CV_PHASE_120MIN (0x5<<3)
+#define PM2XXX_CH_WD_CV_PHASE_240MIN (0x6<<3)
+#define PM2XXX_CH_WD_CV_PHASE_360MIN (0x7<<3)
+
+/* control Reg 4 */
+#define PM2XXX_CH_WD_PRECH_PHASE_OFF 0x0
+#define PM2XXX_CH_WD_PRECH_PHASE_1MIN 0x1
+#define PM2XXX_CH_WD_PRECH_PHASE_5MIN 0x2
+#define PM2XXX_CH_WD_PRECH_PHASE_10MIN 0x3
+#define PM2XXX_CH_WD_PRECH_PHASE_30MIN 0x4
+#define PM2XXX_CH_WD_PRECH_PHASE_60MIN 0x5
+#define PM2XXX_CH_WD_PRECH_PHASE_120MIN 0x6
+#define PM2XXX_CH_WD_PRECH_PHASE_240MIN 0x7
+
+/* control Reg 5 */
+#define PM2XXX_CH_WD_AUTO_TIMEOUT_NONE 0x0
+#define PM2XXX_CH_WD_AUTO_TIMEOUT_20MIN 0x1
+
+/* control Reg 6 */
+#define PM2XXX_DIR_CH_CC_CURRENT_MASK 0x0F
+#define PM2XXX_DIR_CH_CC_CURRENT_200MA 0x0
+#define PM2XXX_DIR_CH_CC_CURRENT_400MA 0x2
+#define PM2XXX_DIR_CH_CC_CURRENT_600MA 0x3
+#define PM2XXX_DIR_CH_CC_CURRENT_800MA 0x4
+#define PM2XXX_DIR_CH_CC_CURRENT_1000MA 0x5
+#define PM2XXX_DIR_CH_CC_CURRENT_1200MA 0x6
+#define PM2XXX_DIR_CH_CC_CURRENT_1400MA 0x7
+#define PM2XXX_DIR_CH_CC_CURRENT_1600MA 0x8
+#define PM2XXX_DIR_CH_CC_CURRENT_1800MA 0x9
+#define PM2XXX_DIR_CH_CC_CURRENT_2000MA 0xA
+#define PM2XXX_DIR_CH_CC_CURRENT_2200MA 0xB
+#define PM2XXX_DIR_CH_CC_CURRENT_2400MA 0xC
+#define PM2XXX_DIR_CH_CC_CURRENT_2600MA 0xD
+#define PM2XXX_DIR_CH_CC_CURRENT_2800MA 0xE
+#define PM2XXX_DIR_CH_CC_CURRENT_3000MA 0xF
+
+#define PM2XXX_CH_PRECH_CURRENT_MASK 0x30
+#define PM2XXX_CH_PRECH_CURRENT_25MA (0x0<<4)
+#define PM2XXX_CH_PRECH_CURRENT_50MA (0x1<<4)
+#define PM2XXX_CH_PRECH_CURRENT_75MA (0x2<<4)
+#define PM2XXX_CH_PRECH_CURRENT_100MA (0x3<<4)
+
+#define PM2XXX_CH_EOC_CURRENT_MASK 0xC0
+#define PM2XXX_CH_EOC_CURRENT_100MA (0x0<<6)
+#define PM2XXX_CH_EOC_CURRENT_150MA (0x1<<6)
+#define PM2XXX_CH_EOC_CURRENT_300MA (0x2<<6)
+#define PM2XXX_CH_EOC_CURRENT_400MA (0x3<<6)
+
+/* control Reg 7 */
+#define PM2XXX_CH_PRECH_VOL_2_5 0x0
+#define PM2XXX_CH_PRECH_VOL_2_7 0x1
+#define PM2XXX_CH_PRECH_VOL_2_9 0x2
+#define PM2XXX_CH_PRECH_VOL_3_1 0x3
+
+#define PM2XXX_CH_VRESUME_VOL_3_2 (0x0<<2)
+#define PM2XXX_CH_VRESUME_VOL_3_4 (0x1<<2)
+#define PM2XXX_CH_VRESUME_VOL_3_6 (0x2<<2)
+#define PM2XXX_CH_VRESUME_VOL_3_8 (0x3<<2)
+
+/* control Reg 8 */
+#define PM2XXX_CH_VOLT_MASK 0x3F
+#define PM2XXX_CH_VOLT_3_5 0x0
+#define PM2XXX_CH_VOLT_3_5225 0x1
+#define PM2XXX_CH_VOLT_3_6 0x4
+#define PM2XXX_CH_VOLT_3_7 0x8
+#define PM2XXX_CH_VOLT_4_0 0x14
+#define PM2XXX_CH_VOLT_4_175 0x1B
+#define PM2XXX_CH_VOLT_4_2 0x1C
+#define PM2XXX_CH_VOLT_4_275 0x1F
+#define PM2XXX_CH_VOLT_4_3 0x20
+
+/*NTC control register 1*/
+#define PM2XXX_BTEMP_HIGH_TH_45 0x0
+#define PM2XXX_BTEMP_HIGH_TH_50 0x1
+#define PM2XXX_BTEMP_HIGH_TH_55 0x2
+#define PM2XXX_BTEMP_HIGH_TH_60 0x3
+#define PM2XXX_BTEMP_HIGH_TH_65 0x4
+
+#define PM2XXX_BTEMP_LOW_TH_N5 (0x0<<3)
+#define PM2XXX_BTEMP_LOW_TH_0 (0x1<<3)
+#define PM2XXX_BTEMP_LOW_TH_5 (0x2<<3)
+#define PM2XXX_BTEMP_LOW_TH_10 (0x3<<3)
+
+/*NTC control register 2*/
+#define PM2XXX_NTC_BETA_COEFF_3477 0x0
+#define PM2XXX_NTC_BETA_COEFF_3964 0x1
+
+#define PM2XXX_NTC_RES_10K (0x0<<2)
+#define PM2XXX_NTC_RES_47K (0x1<<2)
+#define PM2XXX_NTC_RES_100K (0x2<<2)
+#define PM2XXX_NTC_RES_NO_NTC (0x3<<2)
+
+/* control Reg 9 */
+#define PM2XXX_CH_CC_MODEDROP_EN 1
+#define PM2XXX_CH_CC_MODEDROP_DIS 0
+
+#define PM2XXX_CH_CC_REDUCED_CURRENT_100MA (0x0<<1)
+#define PM2XXX_CH_CC_REDUCED_CURRENT_200MA (0x1<<1)
+#define PM2XXX_CH_CC_REDUCED_CURRENT_400MA (0x2<<1)
+#define PM2XXX_CH_CC_REDUCED_CURRENT_IDENT (0x3<<1)
+
+#define PM2XXX_CHARCHING_INFO_DIS (0<<3)
+#define PM2XXX_CHARCHING_INFO_EN (1<<3)
+
+#define PM2XXX_CH_150MV_DROP_300MV (0<<4)
+#define PM2XXX_CH_150MV_DROP_150MV (1<<4)
+
+
+/* charger status register */
+#define PM2XXX_CHG_STATUS_OFF 0x0
+#define PM2XXX_CHG_STATUS_ON 0x1
+#define PM2XXX_CHG_STATUS_FULL 0x2
+#define PM2XXX_CHG_STATUS_ERR 0x3
+#define PM2XXX_CHG_STATUS_WAIT 0x4
+#define PM2XXX_CHG_STATUS_NOBAT 0x5
+
+/* Input charger voltage VPWR2 */
+#define PM2XXX_VPWR2_OVV_6_0 0x0
+#define PM2XXX_VPWR2_OVV_6_3 0x1
+#define PM2XXX_VPWR2_OVV_10 0x2
+#define PM2XXX_VPWR2_OVV_NONE 0x3
+
+/* Input charger drop VPWR2 */
+#define PM2XXX_VPWR2_HW_OPT_EN (0x1<<4)
+#define PM2XXX_VPWR2_HW_OPT_DIS (0x0<<4)
+
+#define PM2XXX_VPWR2_VALID_EN (0x1<<3)
+#define PM2XXX_VPWR2_VALID_DIS (0x0<<3)
+
+#define PM2XXX_VPWR2_DROP_EN (0x1<<2)
+#define PM2XXX_VPWR2_DROP_DIS (0x0<<2)
+
+/* Input charger voltage VPWR1 */
+#define PM2XXX_VPWR1_OVV_6_0 0x0
+#define PM2XXX_VPWR1_OVV_6_3 0x1
+#define PM2XXX_VPWR1_OVV_10 0x2
+#define PM2XXX_VPWR1_OVV_NONE 0x3
+
+/* Input charger drop VPWR1 */
+#define PM2XXX_VPWR1_HW_OPT_EN (0x1<<4)
+#define PM2XXX_VPWR1_HW_OPT_DIS (0x0<<4)
+
+#define PM2XXX_VPWR1_VALID_EN (0x1<<3)
+#define PM2XXX_VPWR1_VALID_DIS (0x0<<3)
+
+#define PM2XXX_VPWR1_DROP_EN (0x1<<2)
+#define PM2XXX_VPWR1_DROP_DIS (0x0<<2)
+
+/* Battery low level comparator control register */
+#define PM2XXX_VBAT_LOW_MONITORING_DIS 0x0
+#define PM2XXX_VBAT_LOW_MONITORING_ENA 0x1
+
+/* Battery low level value control register */
+#define PM2XXX_VBAT_LOW_LEVEL_2_3 0x0
+#define PM2XXX_VBAT_LOW_LEVEL_2_4 0x1
+#define PM2XXX_VBAT_LOW_LEVEL_2_5 0x2
+#define PM2XXX_VBAT_LOW_LEVEL_2_6 0x3
+#define PM2XXX_VBAT_LOW_LEVEL_2_7 0x4
+#define PM2XXX_VBAT_LOW_LEVEL_2_8 0x5
+#define PM2XXX_VBAT_LOW_LEVEL_2_9 0x6
+#define PM2XXX_VBAT_LOW_LEVEL_3_0 0x7
+#define PM2XXX_VBAT_LOW_LEVEL_3_1 0x8
+#define PM2XXX_VBAT_LOW_LEVEL_3_2 0x9
+#define PM2XXX_VBAT_LOW_LEVEL_3_3 0xA
+#define PM2XXX_VBAT_LOW_LEVEL_3_4 0xB
+#define PM2XXX_VBAT_LOW_LEVEL_3_5 0xC
+#define PM2XXX_VBAT_LOW_LEVEL_3_6 0xD
+#define PM2XXX_VBAT_LOW_LEVEL_3_7 0xE
+#define PM2XXX_VBAT_LOW_LEVEL_3_8 0xF
+#define PM2XXX_VBAT_LOW_LEVEL_3_9 0x10
+#define PM2XXX_VBAT_LOW_LEVEL_4_0 0x11
+#define PM2XXX_VBAT_LOW_LEVEL_4_1 0x12
+#define PM2XXX_VBAT_LOW_LEVEL_4_2 0x13
+
+/* SW CTRL */
+#define PM2XXX_SWCTRL_HW 0x0
+#define PM2XXX_SWCTRL_SW 0x1
+
+
+/* LED Driver Control */
+#define PM2XXX_LED_CURRENT_MASK 0x0C
+#define PM2XXX_LED_CURRENT_2_5MA (0X0<<2)
+#define PM2XXX_LED_CURRENT_1MA (0X1<<2)
+#define PM2XXX_LED_CURRENT_5MA (0X2<<2)
+#define PM2XXX_LED_CURRENT_10MA (0X3<<2)
+
+#define PM2XXX_LED_SELECT_MASK 0x02
+#define PM2XXX_LED_SELECT_EN (0X0<<1)
+#define PM2XXX_LED_SELECT_DIS (0X1<<1)
+
+#define PM2XXX_ANTI_OVERSHOOT_MASK 0x01
+#define PM2XXX_ANTI_OVERSHOOT_DIS 0X0
+#define PM2XXX_ANTI_OVERSHOOT_EN 0X1
+
+enum pm2xxx_reg_int1 {
+ PM2XXX_INT1_ITVBATDISCONNECT = 0x02,
+ PM2XXX_INT1_ITVBATLOWR = 0x04,
+ PM2XXX_INT1_ITVBATLOWF = 0x08,
+};
+
+enum pm2xxx_mask_reg_int1 {
+ PM2XXX_INT1_M_ITVBATDISCONNECT = 0x02,
+ PM2XXX_INT1_M_ITVBATLOWR = 0x04,
+ PM2XXX_INT1_M_ITVBATLOWF = 0x08,
+};
+
+enum pm2xxx_source_reg_int1 {
+ PM2XXX_INT1_S_ITVBATDISCONNECT = 0x02,
+ PM2XXX_INT1_S_ITVBATLOWR = 0x04,
+ PM2XXX_INT1_S_ITVBATLOWF = 0x08,
+};
+
+enum pm2xxx_reg_int2 {
+ PM2XXX_INT2_ITVPWR2PLUG = 0x01,
+ PM2XXX_INT2_ITVPWR2UNPLUG = 0x02,
+ PM2XXX_INT2_ITVPWR1PLUG = 0x04,
+ PM2XXX_INT2_ITVPWR1UNPLUG = 0x08,
+};
+
+enum pm2xxx_mask_reg_int2 {
+ PM2XXX_INT2_M_ITVPWR2PLUG = 0x01,
+ PM2XXX_INT2_M_ITVPWR2UNPLUG = 0x02,
+ PM2XXX_INT2_M_ITVPWR1PLUG = 0x04,
+ PM2XXX_INT2_M_ITVPWR1UNPLUG = 0x08,
+};
+
+enum pm2xxx_source_reg_int2 {
+ PM2XXX_INT2_S_ITVPWR2PLUG = 0x03,
+ PM2XXX_INT2_S_ITVPWR1PLUG = 0x0c,
+};
+
+enum pm2xxx_reg_int3 {
+ PM2XXX_INT3_ITCHPRECHARGEWD = 0x01,
+ PM2XXX_INT3_ITCHCCWD = 0x02,
+ PM2XXX_INT3_ITCHCVWD = 0x04,
+ PM2XXX_INT3_ITAUTOTIMEOUTWD = 0x08,
+};
+
+enum pm2xxx_mask_reg_int3 {
+ PM2XXX_INT3_M_ITCHPRECHARGEWD = 0x01,
+ PM2XXX_INT3_M_ITCHCCWD = 0x02,
+ PM2XXX_INT3_M_ITCHCVWD = 0x04,
+ PM2XXX_INT3_M_ITAUTOTIMEOUTWD = 0x08,
+};
+
+enum pm2xxx_source_reg_int3 {
+ PM2XXX_INT3_S_ITCHPRECHARGEWD = 0x01,
+ PM2XXX_INT3_S_ITCHCCWD = 0x02,
+ PM2XXX_INT3_S_ITCHCVWD = 0x04,
+ PM2XXX_INT3_S_ITAUTOTIMEOUTWD = 0x08,
+};
+
+enum pm2xxx_reg_int4 {
+ PM2XXX_INT4_ITBATTEMPCOLD = 0x01,
+ PM2XXX_INT4_ITBATTEMPHOT = 0x02,
+ PM2XXX_INT4_ITVPWR2OVV = 0x04,
+ PM2XXX_INT4_ITVPWR1OVV = 0x08,
+ PM2XXX_INT4_ITCHARGINGON = 0x10,
+ PM2XXX_INT4_ITVRESUME = 0x20,
+ PM2XXX_INT4_ITBATTFULL = 0x40,
+ PM2XXX_INT4_ITCVPHASE = 0x80,
+};
+
+enum pm2xxx_mask_reg_int4 {
+ PM2XXX_INT4_M_ITBATTEMPCOLD = 0x01,
+ PM2XXX_INT4_M_ITBATTEMPHOT = 0x02,
+ PM2XXX_INT4_M_ITVPWR2OVV = 0x04,
+ PM2XXX_INT4_M_ITVPWR1OVV = 0x08,
+ PM2XXX_INT4_M_ITCHARGINGON = 0x10,
+ PM2XXX_INT4_M_ITVRESUME = 0x20,
+ PM2XXX_INT4_M_ITBATTFULL = 0x40,
+ PM2XXX_INT4_M_ITCVPHASE = 0x80,
+};
+
+enum pm2xxx_source_reg_int4 {
+ PM2XXX_INT4_S_ITBATTEMPCOLD = 0x01,
+ PM2XXX_INT4_S_ITBATTEMPHOT = 0x02,
+ PM2XXX_INT4_S_ITVPWR2OVV = 0x04,
+ PM2XXX_INT4_S_ITVPWR1OVV = 0x08,
+ PM2XXX_INT4_S_ITCHARGINGON = 0x10,
+ PM2XXX_INT4_S_ITVRESUME = 0x20,
+ PM2XXX_INT4_S_ITBATTFULL = 0x40,
+ PM2XXX_INT4_S_ITCVPHASE = 0x80,
+};
+
+enum pm2xxx_reg_int5 {
+ PM2XXX_INT5_ITTHERMALSHUTDOWNRISE = 0x01,
+ PM2XXX_INT5_ITTHERMALSHUTDOWNFALL = 0x02,
+ PM2XXX_INT5_ITTHERMALWARNINGRISE = 0x04,
+ PM2XXX_INT5_ITTHERMALWARNINGFALL = 0x08,
+ PM2XXX_INT5_ITVSYSTEMOVV = 0x10,
+};
+
+enum pm2xxx_mask_reg_int5 {
+ PM2XXX_INT5_M_ITTHERMALSHUTDOWNRISE = 0x01,
+ PM2XXX_INT5_M_ITTHERMALSHUTDOWNFALL = 0x02,
+ PM2XXX_INT5_M_ITTHERMALWARNINGRISE = 0x04,
+ PM2XXX_INT5_M_ITTHERMALWARNINGFALL = 0x08,
+ PM2XXX_INT5_M_ITVSYSTEMOVV = 0x10,
+};
+
+enum pm2xxx_source_reg_int5 {
+ PM2XXX_INT5_S_ITTHERMALSHUTDOWNRISE = 0x01,
+ PM2XXX_INT5_S_ITTHERMALSHUTDOWNFALL = 0x02,
+ PM2XXX_INT5_S_ITTHERMALWARNINGRISE = 0x04,
+ PM2XXX_INT5_S_ITTHERMALWARNINGFALL = 0x08,
+ PM2XXX_INT5_S_ITVSYSTEMOVV = 0x10,
+};
+
+enum pm2xxx_reg_int6 {
+ PM2XXX_INT6_ITVPWR2DROP = 0x01,
+ PM2XXX_INT6_ITVPWR1DROP = 0x02,
+ PM2XXX_INT6_ITVPWR2VALIDRISE = 0x04,
+ PM2XXX_INT6_ITVPWR2VALIDFALL = 0x08,
+ PM2XXX_INT6_ITVPWR1VALIDRISE = 0x10,
+ PM2XXX_INT6_ITVPWR1VALIDFALL = 0x20,
+};
+
+enum pm2xxx_mask_reg_int6 {
+ PM2XXX_INT6_M_ITVPWR2DROP = 0x01,
+ PM2XXX_INT6_M_ITVPWR1DROP = 0x02,
+ PM2XXX_INT6_M_ITVPWR2VALIDRISE = 0x04,
+ PM2XXX_INT6_M_ITVPWR2VALIDFALL = 0x08,
+ PM2XXX_INT6_M_ITVPWR1VALIDRISE = 0x10,
+ PM2XXX_INT6_M_ITVPWR1VALIDFALL = 0x20,
+};
+
+enum pm2xxx_source_reg_int6 {
+ PM2XXX_INT6_S_ITVPWR2DROP = 0x01,
+ PM2XXX_INT6_S_ITVPWR1DROP = 0x02,
+ PM2XXX_INT6_S_ITVPWR2VALIDRISE = 0x04,
+ PM2XXX_INT6_S_ITVPWR2VALIDFALL = 0x08,
+ PM2XXX_INT6_S_ITVPWR1VALIDRISE = 0x10,
+ PM2XXX_INT6_S_ITVPWR1VALIDFALL = 0x20,
+};
+
+struct pm2xxx_charger_info {
+ int charger_connected;
+ int charger_online;
+ int cv_active;
+ bool wd_expired;
+};
+
+struct pm2xxx_charger_event_flags {
+ bool mainextchnotok;
+ bool main_thermal_prot;
+ bool ovv;
+ bool chgwdexp;
+};
+
+struct pm2xxx_interrupts {
+ u8 reg[PM2XXX_NUM_INT_REG];
+ int (*handler[PM2XXX_NUM_INT_REG])(void *, int);
+};
+
+struct pm2xxx_config {
+ struct i2c_client *pm2xxx_i2c;
+ struct i2c_device_id *pm2xxx_id;
+};
+
+struct pm2xxx_irq {
+ char *name;
+ irqreturn_t (*isr)(int irq, void *data);
+};
+
+struct pm2xxx_charger {
+ struct device *dev;
+ u8 chip_id;
+ bool vddadc_en_ac;
+ struct pm2xxx_config config;
+ bool ac_conn;
+ unsigned int gpio_irq;
+ int vbat;
+ int old_vbat;
+ int failure_case;
+ int failure_input_ovv;
+ unsigned int lpn_pin;
+ struct pm2xxx_interrupts *pm2_int;
+ struct regulator *regu;
+ struct pm2xxx_bm_data *bat;
+ struct mutex lock;
+ struct ab8500 *parent;
+ struct pm2xxx_charger_info ac;
+ struct pm2xxx_charger_platform_data *pdata;
+ struct workqueue_struct *charger_wq;
+ struct delayed_work check_vbat_work;
+ struct work_struct ac_work;
+ struct work_struct check_main_thermal_prot_work;
+ struct delayed_work check_hw_failure_work;
+ struct ux500_charger ac_chg;
+ struct power_supply_desc ac_chg_desc;
+ struct pm2xxx_charger_event_flags flags;
+};
+
+#endif /* PM2301_CHARGER_H */
diff --git a/drivers/power/supply/pmu_battery.c b/drivers/power/supply/pmu_battery.c
new file mode 100644
index 000000000..eaab7500d
--- /dev/null
+++ b/drivers/power/supply/pmu_battery.c
@@ -0,0 +1,223 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Battery class driver for Apple PMU
+ *
+ * Copyright © 2006 David Woodhouse <dwmw2@infradead.org>
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/err.h>
+#include <linux/power_supply.h>
+#include <linux/adb.h>
+#include <linux/pmu.h>
+#include <linux/slab.h>
+
+static struct pmu_battery_dev {
+ struct power_supply *bat;
+ struct power_supply_desc bat_desc;
+ struct pmu_battery_info *pbi;
+ char name[16];
+ int propval;
+} *pbats[PMU_MAX_BATTERIES];
+
+#define to_pmu_battery_dev(x) power_supply_get_drvdata(x)
+
+/*********************************************************************
+ * Power
+ *********************************************************************/
+
+static int pmu_get_ac_prop(struct power_supply *psy,
+ enum power_supply_property psp,
+ union power_supply_propval *val)
+{
+ switch (psp) {
+ case POWER_SUPPLY_PROP_ONLINE:
+ val->intval = (!!(pmu_power_flags & PMU_PWR_AC_PRESENT)) ||
+ (pmu_battery_count == 0);
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static enum power_supply_property pmu_ac_props[] = {
+ POWER_SUPPLY_PROP_ONLINE,
+};
+
+static const struct power_supply_desc pmu_ac_desc = {
+ .name = "pmu-ac",
+ .type = POWER_SUPPLY_TYPE_MAINS,
+ .properties = pmu_ac_props,
+ .num_properties = ARRAY_SIZE(pmu_ac_props),
+ .get_property = pmu_get_ac_prop,
+};
+
+static struct power_supply *pmu_ac;
+
+/*********************************************************************
+ * Battery properties
+ *********************************************************************/
+
+static char *pmu_batt_types[] = {
+ "Smart", "Comet", "Hooper", "Unknown"
+};
+
+static char *pmu_bat_get_model_name(struct pmu_battery_info *pbi)
+{
+ switch (pbi->flags & PMU_BATT_TYPE_MASK) {
+ case PMU_BATT_TYPE_SMART:
+ return pmu_batt_types[0];
+ case PMU_BATT_TYPE_COMET:
+ return pmu_batt_types[1];
+ case PMU_BATT_TYPE_HOOPER:
+ return pmu_batt_types[2];
+ default: break;
+ }
+ return pmu_batt_types[3];
+}
+
+static int pmu_bat_get_property(struct power_supply *psy,
+ enum power_supply_property psp,
+ union power_supply_propval *val)
+{
+ struct pmu_battery_dev *pbat = to_pmu_battery_dev(psy);
+ struct pmu_battery_info *pbi = pbat->pbi;
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_STATUS:
+ if (pbi->flags & PMU_BATT_CHARGING)
+ val->intval = POWER_SUPPLY_STATUS_CHARGING;
+ else if (pmu_power_flags & PMU_PWR_AC_PRESENT)
+ val->intval = POWER_SUPPLY_STATUS_FULL;
+ else
+ val->intval = POWER_SUPPLY_STATUS_DISCHARGING;
+ break;
+ case POWER_SUPPLY_PROP_PRESENT:
+ val->intval = !!(pbi->flags & PMU_BATT_PRESENT);
+ break;
+ case POWER_SUPPLY_PROP_MODEL_NAME:
+ val->strval = pmu_bat_get_model_name(pbi);
+ break;
+ case POWER_SUPPLY_PROP_ENERGY_AVG:
+ val->intval = pbi->charge * 1000; /* mWh -> µWh */
+ break;
+ case POWER_SUPPLY_PROP_ENERGY_FULL:
+ val->intval = pbi->max_charge * 1000; /* mWh -> µWh */
+ break;
+ case POWER_SUPPLY_PROP_CURRENT_AVG:
+ val->intval = pbi->amperage * 1000; /* mA -> µA */
+ break;
+ case POWER_SUPPLY_PROP_VOLTAGE_AVG:
+ val->intval = pbi->voltage * 1000; /* mV -> µV */
+ break;
+ case POWER_SUPPLY_PROP_TIME_TO_EMPTY_AVG:
+ val->intval = pbi->time_remaining;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static enum power_supply_property pmu_bat_props[] = {
+ POWER_SUPPLY_PROP_STATUS,
+ POWER_SUPPLY_PROP_PRESENT,
+ POWER_SUPPLY_PROP_MODEL_NAME,
+ POWER_SUPPLY_PROP_ENERGY_AVG,
+ POWER_SUPPLY_PROP_ENERGY_FULL,
+ POWER_SUPPLY_PROP_CURRENT_AVG,
+ POWER_SUPPLY_PROP_VOLTAGE_AVG,
+ POWER_SUPPLY_PROP_TIME_TO_EMPTY_AVG,
+};
+
+/*********************************************************************
+ * Initialisation
+ *********************************************************************/
+
+static struct platform_device *bat_pdev;
+
+static int __init pmu_bat_init(void)
+{
+ int ret = 0;
+ int i;
+
+ bat_pdev = platform_device_register_simple("pmu-battery",
+ 0, NULL, 0);
+ if (IS_ERR(bat_pdev)) {
+ ret = PTR_ERR(bat_pdev);
+ goto pdev_register_failed;
+ }
+
+ pmu_ac = power_supply_register(&bat_pdev->dev, &pmu_ac_desc, NULL);
+ if (IS_ERR(pmu_ac)) {
+ ret = PTR_ERR(pmu_ac);
+ goto ac_register_failed;
+ }
+
+ for (i = 0; i < pmu_battery_count; i++) {
+ struct power_supply_config psy_cfg = {};
+ struct pmu_battery_dev *pbat = kzalloc(sizeof(*pbat),
+ GFP_KERNEL);
+ if (!pbat)
+ break;
+
+ sprintf(pbat->name, "PMU_battery_%d", i);
+ pbat->bat_desc.name = pbat->name;
+ pbat->bat_desc.properties = pmu_bat_props;
+ pbat->bat_desc.num_properties = ARRAY_SIZE(pmu_bat_props);
+ pbat->bat_desc.get_property = pmu_bat_get_property;
+ pbat->pbi = &pmu_batteries[i];
+ psy_cfg.drv_data = pbat;
+
+ pbat->bat = power_supply_register(&bat_pdev->dev,
+ &pbat->bat_desc,
+ &psy_cfg);
+ if (IS_ERR(pbat->bat)) {
+ ret = PTR_ERR(pbat->bat);
+ kfree(pbat);
+ goto battery_register_failed;
+ }
+ pbats[i] = pbat;
+ }
+
+ goto success;
+
+battery_register_failed:
+ while (i--) {
+ if (!pbats[i])
+ continue;
+ power_supply_unregister(pbats[i]->bat);
+ kfree(pbats[i]);
+ }
+ power_supply_unregister(pmu_ac);
+ac_register_failed:
+ platform_device_unregister(bat_pdev);
+pdev_register_failed:
+success:
+ return ret;
+}
+
+static void __exit pmu_bat_exit(void)
+{
+ int i;
+
+ for (i = 0; i < PMU_MAX_BATTERIES; i++) {
+ if (!pbats[i])
+ continue;
+ power_supply_unregister(pbats[i]->bat);
+ kfree(pbats[i]);
+ }
+ power_supply_unregister(pmu_ac);
+ platform_device_unregister(bat_pdev);
+}
+
+module_init(pmu_bat_init);
+module_exit(pmu_bat_exit);
+
+MODULE_AUTHOR("David Woodhouse <dwmw2@infradead.org>");
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("PMU battery driver");
diff --git a/drivers/power/supply/power_supply.h b/drivers/power/supply/power_supply.h
new file mode 100644
index 000000000..c310d4f36
--- /dev/null
+++ b/drivers/power/supply/power_supply.h
@@ -0,0 +1,41 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Functions private to power supply class
+ *
+ * Copyright © 2007 Anton Vorontsov <cbou@mail.ru>
+ * Copyright © 2004 Szabolcs Gyurko
+ * Copyright © 2003 Ian Molton <spyro@f2s.com>
+ *
+ * Modified: 2004, Oct Szabolcs Gyurko
+ */
+
+struct device;
+struct device_type;
+struct power_supply;
+
+#ifdef CONFIG_SYSFS
+
+extern void power_supply_init_attrs(struct device_type *dev_type);
+extern int power_supply_uevent(struct device *dev, struct kobj_uevent_env *env);
+
+#else
+
+static inline void power_supply_init_attrs(struct device_type *dev_type) {}
+#define power_supply_uevent NULL
+
+#endif /* CONFIG_SYSFS */
+
+#ifdef CONFIG_LEDS_TRIGGERS
+
+extern void power_supply_update_leds(struct power_supply *psy);
+extern int power_supply_create_triggers(struct power_supply *psy);
+extern void power_supply_remove_triggers(struct power_supply *psy);
+
+#else
+
+static inline void power_supply_update_leds(struct power_supply *psy) {}
+static inline int power_supply_create_triggers(struct power_supply *psy)
+{ return 0; }
+static inline void power_supply_remove_triggers(struct power_supply *psy) {}
+
+#endif /* CONFIG_LEDS_TRIGGERS */
diff --git a/drivers/power/supply/power_supply_core.c b/drivers/power/supply/power_supply_core.c
new file mode 100644
index 000000000..5c8c117b3
--- /dev/null
+++ b/drivers/power/supply/power_supply_core.c
@@ -0,0 +1,1403 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Universal power supply monitor class
+ *
+ * Copyright © 2007 Anton Vorontsov <cbou@mail.ru>
+ * Copyright © 2004 Szabolcs Gyurko
+ * Copyright © 2003 Ian Molton <spyro@f2s.com>
+ *
+ * Modified: 2004, Oct Szabolcs Gyurko
+ */
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/notifier.h>
+#include <linux/err.h>
+#include <linux/of.h>
+#include <linux/power_supply.h>
+#include <linux/property.h>
+#include <linux/thermal.h>
+#include "power_supply.h"
+
+/* exported for the APM Power driver, APM emulation */
+struct class *power_supply_class;
+EXPORT_SYMBOL_GPL(power_supply_class);
+
+ATOMIC_NOTIFIER_HEAD(power_supply_notifier);
+EXPORT_SYMBOL_GPL(power_supply_notifier);
+
+static struct device_type power_supply_dev_type;
+
+#define POWER_SUPPLY_DEFERRED_REGISTER_TIME msecs_to_jiffies(10)
+
+static bool __power_supply_is_supplied_by(struct power_supply *supplier,
+ struct power_supply *supply)
+{
+ int i;
+
+ if (!supply->supplied_from && !supplier->supplied_to)
+ return false;
+
+ /* Support both supplied_to and supplied_from modes */
+ if (supply->supplied_from) {
+ if (!supplier->desc->name)
+ return false;
+ for (i = 0; i < supply->num_supplies; i++)
+ if (!strcmp(supplier->desc->name, supply->supplied_from[i]))
+ return true;
+ } else {
+ if (!supply->desc->name)
+ return false;
+ for (i = 0; i < supplier->num_supplicants; i++)
+ if (!strcmp(supplier->supplied_to[i], supply->desc->name))
+ return true;
+ }
+
+ return false;
+}
+
+static int __power_supply_changed_work(struct device *dev, void *data)
+{
+ struct power_supply *psy = data;
+ struct power_supply *pst = dev_get_drvdata(dev);
+
+ if (__power_supply_is_supplied_by(psy, pst)) {
+ if (pst->desc->external_power_changed)
+ pst->desc->external_power_changed(pst);
+ }
+
+ return 0;
+}
+
+static void power_supply_changed_work(struct work_struct *work)
+{
+ unsigned long flags;
+ struct power_supply *psy = container_of(work, struct power_supply,
+ changed_work);
+
+ dev_dbg(&psy->dev, "%s\n", __func__);
+
+ spin_lock_irqsave(&psy->changed_lock, flags);
+ /*
+ * Check 'changed' here to avoid issues due to race between
+ * power_supply_changed() and this routine. In worst case
+ * power_supply_changed() can be called again just before we take above
+ * lock. During the first call of this routine we will mark 'changed' as
+ * false and it will stay false for the next call as well.
+ */
+ if (likely(psy->changed)) {
+ psy->changed = false;
+ spin_unlock_irqrestore(&psy->changed_lock, flags);
+ class_for_each_device(power_supply_class, NULL, psy,
+ __power_supply_changed_work);
+ power_supply_update_leds(psy);
+ atomic_notifier_call_chain(&power_supply_notifier,
+ PSY_EVENT_PROP_CHANGED, psy);
+ kobject_uevent(&psy->dev.kobj, KOBJ_CHANGE);
+ spin_lock_irqsave(&psy->changed_lock, flags);
+ }
+
+ /*
+ * Hold the wakeup_source until all events are processed.
+ * power_supply_changed() might have called again and have set 'changed'
+ * to true.
+ */
+ if (likely(!psy->changed))
+ pm_relax(&psy->dev);
+ spin_unlock_irqrestore(&psy->changed_lock, flags);
+}
+
+void power_supply_changed(struct power_supply *psy)
+{
+ unsigned long flags;
+
+ dev_dbg(&psy->dev, "%s\n", __func__);
+
+ spin_lock_irqsave(&psy->changed_lock, flags);
+ psy->changed = true;
+ pm_stay_awake(&psy->dev);
+ spin_unlock_irqrestore(&psy->changed_lock, flags);
+ schedule_work(&psy->changed_work);
+}
+EXPORT_SYMBOL_GPL(power_supply_changed);
+
+/*
+ * Notify that power supply was registered after parent finished the probing.
+ *
+ * Often power supply is registered from driver's probe function. However
+ * calling power_supply_changed() directly from power_supply_register()
+ * would lead to execution of get_property() function provided by the driver
+ * too early - before the probe ends.
+ *
+ * Avoid that by waiting on parent's mutex.
+ */
+static void power_supply_deferred_register_work(struct work_struct *work)
+{
+ struct power_supply *psy = container_of(work, struct power_supply,
+ deferred_register_work.work);
+
+ if (psy->dev.parent) {
+ while (!mutex_trylock(&psy->dev.parent->mutex)) {
+ if (psy->removing)
+ return;
+ msleep(10);
+ }
+ }
+
+ power_supply_changed(psy);
+
+ if (psy->dev.parent)
+ mutex_unlock(&psy->dev.parent->mutex);
+}
+
+#ifdef CONFIG_OF
+static int __power_supply_populate_supplied_from(struct device *dev,
+ void *data)
+{
+ struct power_supply *psy = data;
+ struct power_supply *epsy = dev_get_drvdata(dev);
+ struct device_node *np;
+ int i = 0;
+
+ do {
+ np = of_parse_phandle(psy->of_node, "power-supplies", i++);
+ if (!np)
+ break;
+
+ if (np == epsy->of_node) {
+ dev_info(&psy->dev, "%s: Found supply : %s\n",
+ psy->desc->name, epsy->desc->name);
+ psy->supplied_from[i-1] = (char *)epsy->desc->name;
+ psy->num_supplies++;
+ of_node_put(np);
+ break;
+ }
+ of_node_put(np);
+ } while (np);
+
+ return 0;
+}
+
+static int power_supply_populate_supplied_from(struct power_supply *psy)
+{
+ int error;
+
+ error = class_for_each_device(power_supply_class, NULL, psy,
+ __power_supply_populate_supplied_from);
+
+ dev_dbg(&psy->dev, "%s %d\n", __func__, error);
+
+ return error;
+}
+
+static int __power_supply_find_supply_from_node(struct device *dev,
+ void *data)
+{
+ struct device_node *np = data;
+ struct power_supply *epsy = dev_get_drvdata(dev);
+
+ /* returning non-zero breaks out of class_for_each_device loop */
+ if (epsy->of_node == np)
+ return 1;
+
+ return 0;
+}
+
+static int power_supply_find_supply_from_node(struct device_node *supply_node)
+{
+ int error;
+
+ /*
+ * class_for_each_device() either returns its own errors or values
+ * returned by __power_supply_find_supply_from_node().
+ *
+ * __power_supply_find_supply_from_node() will return 0 (no match)
+ * or 1 (match).
+ *
+ * We return 0 if class_for_each_device() returned 1, -EPROBE_DEFER if
+ * it returned 0, or error as returned by it.
+ */
+ error = class_for_each_device(power_supply_class, NULL, supply_node,
+ __power_supply_find_supply_from_node);
+
+ return error ? (error == 1 ? 0 : error) : -EPROBE_DEFER;
+}
+
+static int power_supply_check_supplies(struct power_supply *psy)
+{
+ struct device_node *np;
+ int cnt = 0;
+
+ /* If there is already a list honor it */
+ if (psy->supplied_from && psy->num_supplies > 0)
+ return 0;
+
+ /* No device node found, nothing to do */
+ if (!psy->of_node)
+ return 0;
+
+ do {
+ int ret;
+
+ np = of_parse_phandle(psy->of_node, "power-supplies", cnt++);
+ if (!np)
+ break;
+
+ ret = power_supply_find_supply_from_node(np);
+ of_node_put(np);
+
+ if (ret) {
+ dev_dbg(&psy->dev, "Failed to find supply!\n");
+ return ret;
+ }
+ } while (np);
+
+ /* Missing valid "power-supplies" entries */
+ if (cnt == 1)
+ return 0;
+
+ /* All supplies found, allocate char ** array for filling */
+ psy->supplied_from = devm_kzalloc(&psy->dev, sizeof(psy->supplied_from),
+ GFP_KERNEL);
+ if (!psy->supplied_from)
+ return -ENOMEM;
+
+ *psy->supplied_from = devm_kcalloc(&psy->dev,
+ cnt - 1, sizeof(char *),
+ GFP_KERNEL);
+ if (!*psy->supplied_from)
+ return -ENOMEM;
+
+ return power_supply_populate_supplied_from(psy);
+}
+#else
+static int power_supply_check_supplies(struct power_supply *psy)
+{
+ int nval, ret;
+
+ if (!psy->dev.parent)
+ return 0;
+
+ nval = device_property_read_string_array(psy->dev.parent,
+ "supplied-from", NULL, 0);
+ if (nval <= 0)
+ return 0;
+
+ psy->supplied_from = devm_kmalloc_array(&psy->dev, nval,
+ sizeof(char *), GFP_KERNEL);
+ if (!psy->supplied_from)
+ return -ENOMEM;
+
+ ret = device_property_read_string_array(psy->dev.parent,
+ "supplied-from", (const char **)psy->supplied_from, nval);
+ if (ret < 0)
+ return ret;
+
+ psy->num_supplies = nval;
+
+ return 0;
+}
+#endif
+
+struct psy_am_i_supplied_data {
+ struct power_supply *psy;
+ unsigned int count;
+};
+
+static int __power_supply_am_i_supplied(struct device *dev, void *_data)
+{
+ union power_supply_propval ret = {0,};
+ struct power_supply *epsy = dev_get_drvdata(dev);
+ struct psy_am_i_supplied_data *data = _data;
+
+ if (__power_supply_is_supplied_by(epsy, data->psy)) {
+ data->count++;
+ if (!epsy->desc->get_property(epsy, POWER_SUPPLY_PROP_ONLINE,
+ &ret))
+ return ret.intval;
+ }
+
+ return 0;
+}
+
+int power_supply_am_i_supplied(struct power_supply *psy)
+{
+ struct psy_am_i_supplied_data data = { psy, 0 };
+ int error;
+
+ error = class_for_each_device(power_supply_class, NULL, &data,
+ __power_supply_am_i_supplied);
+
+ dev_dbg(&psy->dev, "%s count %u err %d\n", __func__, data.count, error);
+
+ if (data.count == 0)
+ return -ENODEV;
+
+ return error;
+}
+EXPORT_SYMBOL_GPL(power_supply_am_i_supplied);
+
+static int __power_supply_is_system_supplied(struct device *dev, void *data)
+{
+ union power_supply_propval ret = {0,};
+ struct power_supply *psy = dev_get_drvdata(dev);
+ unsigned int *count = data;
+
+ if (!psy->desc->get_property(psy, POWER_SUPPLY_PROP_SCOPE, &ret))
+ if (ret.intval == POWER_SUPPLY_SCOPE_DEVICE)
+ return 0;
+
+ (*count)++;
+ if (psy->desc->type != POWER_SUPPLY_TYPE_BATTERY)
+ if (!psy->desc->get_property(psy, POWER_SUPPLY_PROP_ONLINE,
+ &ret))
+ return ret.intval;
+
+ return 0;
+}
+
+int power_supply_is_system_supplied(void)
+{
+ int error;
+ unsigned int count = 0;
+
+ error = class_for_each_device(power_supply_class, NULL, &count,
+ __power_supply_is_system_supplied);
+
+ /*
+ * If no system scope power class device was found at all, most probably we
+ * are running on a desktop system, so assume we are on mains power.
+ */
+ if (count == 0)
+ return 1;
+
+ return error;
+}
+EXPORT_SYMBOL_GPL(power_supply_is_system_supplied);
+
+struct psy_get_supplier_prop_data {
+ struct power_supply *psy;
+ enum power_supply_property psp;
+ union power_supply_propval *val;
+};
+
+static int __power_supply_get_supplier_property(struct device *dev, void *_data)
+{
+ struct power_supply *epsy = dev_get_drvdata(dev);
+ struct psy_get_supplier_prop_data *data = _data;
+
+ if (__power_supply_is_supplied_by(epsy, data->psy))
+ if (!epsy->desc->get_property(epsy, data->psp, data->val))
+ return 1; /* Success */
+
+ return 0; /* Continue iterating */
+}
+
+int power_supply_get_property_from_supplier(struct power_supply *psy,
+ enum power_supply_property psp,
+ union power_supply_propval *val)
+{
+ struct psy_get_supplier_prop_data data = {
+ .psy = psy,
+ .psp = psp,
+ .val = val,
+ };
+ int ret;
+
+ /*
+ * This function is not intended for use with a supply with multiple
+ * suppliers, we simply pick the first supply to report the psp.
+ */
+ ret = class_for_each_device(power_supply_class, NULL, &data,
+ __power_supply_get_supplier_property);
+ if (ret < 0)
+ return ret;
+ if (ret == 0)
+ return -ENODEV;
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(power_supply_get_property_from_supplier);
+
+int power_supply_set_battery_charged(struct power_supply *psy)
+{
+ if (atomic_read(&psy->use_cnt) >= 0 &&
+ psy->desc->type == POWER_SUPPLY_TYPE_BATTERY &&
+ psy->desc->set_charged) {
+ psy->desc->set_charged(psy);
+ return 0;
+ }
+
+ return -EINVAL;
+}
+EXPORT_SYMBOL_GPL(power_supply_set_battery_charged);
+
+static int power_supply_match_device_by_name(struct device *dev, const void *data)
+{
+ const char *name = data;
+ struct power_supply *psy = dev_get_drvdata(dev);
+
+ return strcmp(psy->desc->name, name) == 0;
+}
+
+/**
+ * power_supply_get_by_name() - Search for a power supply and returns its ref
+ * @name: Power supply name to fetch
+ *
+ * If power supply was found, it increases reference count for the
+ * internal power supply's device. The user should power_supply_put()
+ * after usage.
+ *
+ * Return: On success returns a reference to a power supply with
+ * matching name equals to @name, a NULL otherwise.
+ */
+struct power_supply *power_supply_get_by_name(const char *name)
+{
+ struct power_supply *psy = NULL;
+ struct device *dev = class_find_device(power_supply_class, NULL, name,
+ power_supply_match_device_by_name);
+
+ if (dev) {
+ psy = dev_get_drvdata(dev);
+ atomic_inc(&psy->use_cnt);
+ }
+
+ return psy;
+}
+EXPORT_SYMBOL_GPL(power_supply_get_by_name);
+
+/**
+ * power_supply_put() - Drop reference obtained with power_supply_get_by_name
+ * @psy: Reference to put
+ *
+ * The reference to power supply should be put before unregistering
+ * the power supply.
+ */
+void power_supply_put(struct power_supply *psy)
+{
+ might_sleep();
+
+ atomic_dec(&psy->use_cnt);
+ put_device(&psy->dev);
+}
+EXPORT_SYMBOL_GPL(power_supply_put);
+
+#ifdef CONFIG_OF
+static int power_supply_match_device_node(struct device *dev, const void *data)
+{
+ return dev->parent && dev->parent->of_node == data;
+}
+
+/**
+ * power_supply_get_by_phandle() - Search for a power supply and returns its ref
+ * @np: Pointer to device node holding phandle property
+ * @property: Name of property holding a power supply name
+ *
+ * If power supply was found, it increases reference count for the
+ * internal power supply's device. The user should power_supply_put()
+ * after usage.
+ *
+ * Return: On success returns a reference to a power supply with
+ * matching name equals to value under @property, NULL or ERR_PTR otherwise.
+ */
+struct power_supply *power_supply_get_by_phandle(struct device_node *np,
+ const char *property)
+{
+ struct device_node *power_supply_np;
+ struct power_supply *psy = NULL;
+ struct device *dev;
+
+ power_supply_np = of_parse_phandle(np, property, 0);
+ if (!power_supply_np)
+ return ERR_PTR(-ENODEV);
+
+ dev = class_find_device(power_supply_class, NULL, power_supply_np,
+ power_supply_match_device_node);
+
+ of_node_put(power_supply_np);
+
+ if (dev) {
+ psy = dev_get_drvdata(dev);
+ atomic_inc(&psy->use_cnt);
+ }
+
+ return psy;
+}
+EXPORT_SYMBOL_GPL(power_supply_get_by_phandle);
+
+static void devm_power_supply_put(struct device *dev, void *res)
+{
+ struct power_supply **psy = res;
+
+ power_supply_put(*psy);
+}
+
+/**
+ * devm_power_supply_get_by_phandle() - Resource managed version of
+ * power_supply_get_by_phandle()
+ * @dev: Pointer to device holding phandle property
+ * @property: Name of property holding a power supply phandle
+ *
+ * Return: On success returns a reference to a power supply with
+ * matching name equals to value under @property, NULL or ERR_PTR otherwise.
+ */
+struct power_supply *devm_power_supply_get_by_phandle(struct device *dev,
+ const char *property)
+{
+ struct power_supply **ptr, *psy;
+
+ if (!dev->of_node)
+ return ERR_PTR(-ENODEV);
+
+ ptr = devres_alloc(devm_power_supply_put, sizeof(*ptr), GFP_KERNEL);
+ if (!ptr)
+ return ERR_PTR(-ENOMEM);
+
+ psy = power_supply_get_by_phandle(dev->of_node, property);
+ if (IS_ERR_OR_NULL(psy)) {
+ devres_free(ptr);
+ } else {
+ *ptr = psy;
+ devres_add(dev, ptr);
+ }
+ return psy;
+}
+EXPORT_SYMBOL_GPL(devm_power_supply_get_by_phandle);
+#endif /* CONFIG_OF */
+
+int power_supply_get_battery_info(struct power_supply *psy,
+ struct power_supply_battery_info *info)
+{
+ struct power_supply_resistance_temp_table *resist_table;
+ struct device_node *battery_np;
+ const char *value;
+ int err, len, index;
+ const __be32 *list;
+
+ info->energy_full_design_uwh = -EINVAL;
+ info->charge_full_design_uah = -EINVAL;
+ info->voltage_min_design_uv = -EINVAL;
+ info->voltage_max_design_uv = -EINVAL;
+ info->precharge_current_ua = -EINVAL;
+ info->charge_term_current_ua = -EINVAL;
+ info->constant_charge_current_max_ua = -EINVAL;
+ info->constant_charge_voltage_max_uv = -EINVAL;
+ info->temp_ambient_alert_min = INT_MIN;
+ info->temp_ambient_alert_max = INT_MAX;
+ info->temp_alert_min = INT_MIN;
+ info->temp_alert_max = INT_MAX;
+ info->temp_min = INT_MIN;
+ info->temp_max = INT_MAX;
+ info->factory_internal_resistance_uohm = -EINVAL;
+ info->resist_table = NULL;
+
+ for (index = 0; index < POWER_SUPPLY_OCV_TEMP_MAX; index++) {
+ info->ocv_table[index] = NULL;
+ info->ocv_temp[index] = -EINVAL;
+ info->ocv_table_size[index] = -EINVAL;
+ }
+
+ if (!psy->of_node) {
+ dev_warn(&psy->dev, "%s currently only supports devicetree\n",
+ __func__);
+ return -ENXIO;
+ }
+
+ battery_np = of_parse_phandle(psy->of_node, "monitored-battery", 0);
+ if (!battery_np)
+ return -ENODEV;
+
+ err = of_property_read_string(battery_np, "compatible", &value);
+ if (err)
+ goto out_put_node;
+
+ if (strcmp("simple-battery", value)) {
+ err = -ENODEV;
+ goto out_put_node;
+ }
+
+ /* The property and field names below must correspond to elements
+ * in enum power_supply_property. For reasoning, see
+ * Documentation/power/power_supply_class.rst.
+ */
+
+ of_property_read_u32(battery_np, "energy-full-design-microwatt-hours",
+ &info->energy_full_design_uwh);
+ of_property_read_u32(battery_np, "charge-full-design-microamp-hours",
+ &info->charge_full_design_uah);
+ of_property_read_u32(battery_np, "voltage-min-design-microvolt",
+ &info->voltage_min_design_uv);
+ of_property_read_u32(battery_np, "voltage-max-design-microvolt",
+ &info->voltage_max_design_uv);
+ of_property_read_u32(battery_np, "trickle-charge-current-microamp",
+ &info->tricklecharge_current_ua);
+ of_property_read_u32(battery_np, "precharge-current-microamp",
+ &info->precharge_current_ua);
+ of_property_read_u32(battery_np, "precharge-upper-limit-microvolt",
+ &info->precharge_voltage_max_uv);
+ of_property_read_u32(battery_np, "charge-term-current-microamp",
+ &info->charge_term_current_ua);
+ of_property_read_u32(battery_np, "re-charge-voltage-microvolt",
+ &info->charge_restart_voltage_uv);
+ of_property_read_u32(battery_np, "over-voltage-threshold-microvolt",
+ &info->overvoltage_limit_uv);
+ of_property_read_u32(battery_np, "constant-charge-current-max-microamp",
+ &info->constant_charge_current_max_ua);
+ of_property_read_u32(battery_np, "constant-charge-voltage-max-microvolt",
+ &info->constant_charge_voltage_max_uv);
+ of_property_read_u32(battery_np, "factory-internal-resistance-micro-ohms",
+ &info->factory_internal_resistance_uohm);
+
+ of_property_read_u32_index(battery_np, "ambient-celsius",
+ 0, &info->temp_ambient_alert_min);
+ of_property_read_u32_index(battery_np, "ambient-celsius",
+ 1, &info->temp_ambient_alert_max);
+ of_property_read_u32_index(battery_np, "alert-celsius",
+ 0, &info->temp_alert_min);
+ of_property_read_u32_index(battery_np, "alert-celsius",
+ 1, &info->temp_alert_max);
+ of_property_read_u32_index(battery_np, "operating-range-celsius",
+ 0, &info->temp_min);
+ of_property_read_u32_index(battery_np, "operating-range-celsius",
+ 1, &info->temp_max);
+
+ len = of_property_count_u32_elems(battery_np, "ocv-capacity-celsius");
+ if (len < 0 && len != -EINVAL) {
+ err = len;
+ goto out_put_node;
+ } else if (len > POWER_SUPPLY_OCV_TEMP_MAX) {
+ dev_err(&psy->dev, "Too many temperature values\n");
+ err = -EINVAL;
+ goto out_put_node;
+ } else if (len > 0) {
+ of_property_read_u32_array(battery_np, "ocv-capacity-celsius",
+ info->ocv_temp, len);
+ }
+
+ for (index = 0; index < len; index++) {
+ struct power_supply_battery_ocv_table *table;
+ char *propname;
+ int i, tab_len, size;
+
+ propname = kasprintf(GFP_KERNEL, "ocv-capacity-table-%d", index);
+ if (!propname) {
+ power_supply_put_battery_info(psy, info);
+ err = -ENOMEM;
+ goto out_put_node;
+ }
+ list = of_get_property(battery_np, propname, &size);
+ if (!list || !size) {
+ dev_err(&psy->dev, "failed to get %s\n", propname);
+ kfree(propname);
+ power_supply_put_battery_info(psy, info);
+ err = -EINVAL;
+ goto out_put_node;
+ }
+
+ kfree(propname);
+ tab_len = size / (2 * sizeof(__be32));
+ info->ocv_table_size[index] = tab_len;
+
+ table = info->ocv_table[index] =
+ devm_kcalloc(&psy->dev, tab_len, sizeof(*table), GFP_KERNEL);
+ if (!info->ocv_table[index]) {
+ power_supply_put_battery_info(psy, info);
+ err = -ENOMEM;
+ goto out_put_node;
+ }
+
+ for (i = 0; i < tab_len; i++) {
+ table[i].ocv = be32_to_cpu(*list);
+ list++;
+ table[i].capacity = be32_to_cpu(*list);
+ list++;
+ }
+ }
+
+ list = of_get_property(battery_np, "resistance-temp-table", &len);
+ if (!list || !len)
+ goto out_put_node;
+
+ info->resist_table_size = len / (2 * sizeof(__be32));
+ resist_table = info->resist_table = devm_kcalloc(&psy->dev,
+ info->resist_table_size,
+ sizeof(*resist_table),
+ GFP_KERNEL);
+ if (!info->resist_table) {
+ power_supply_put_battery_info(psy, info);
+ err = -ENOMEM;
+ goto out_put_node;
+ }
+
+ for (index = 0; index < info->resist_table_size; index++) {
+ resist_table[index].temp = be32_to_cpu(*list++);
+ resist_table[index].resistance = be32_to_cpu(*list++);
+ }
+
+out_put_node:
+ of_node_put(battery_np);
+ return err;
+}
+EXPORT_SYMBOL_GPL(power_supply_get_battery_info);
+
+void power_supply_put_battery_info(struct power_supply *psy,
+ struct power_supply_battery_info *info)
+{
+ int i;
+
+ for (i = 0; i < POWER_SUPPLY_OCV_TEMP_MAX; i++) {
+ if (info->ocv_table[i])
+ devm_kfree(&psy->dev, info->ocv_table[i]);
+ }
+
+ if (info->resist_table)
+ devm_kfree(&psy->dev, info->resist_table);
+}
+EXPORT_SYMBOL_GPL(power_supply_put_battery_info);
+
+/**
+ * power_supply_temp2resist_simple() - find the battery internal resistance
+ * percent
+ * @table: Pointer to battery resistance temperature table
+ * @table_len: The table length
+ * @temp: Current temperature
+ *
+ * This helper function is used to look up battery internal resistance percent
+ * according to current temperature value from the resistance temperature table,
+ * and the table must be ordered descending. Then the actual battery internal
+ * resistance = the ideal battery internal resistance * percent / 100.
+ *
+ * Return: the battery internal resistance percent
+ */
+int power_supply_temp2resist_simple(struct power_supply_resistance_temp_table *table,
+ int table_len, int temp)
+{
+ int i, resist;
+
+ for (i = 0; i < table_len; i++)
+ if (temp > table[i].temp)
+ break;
+
+ if (i > 0 && i < table_len) {
+ int tmp;
+
+ tmp = (table[i - 1].resistance - table[i].resistance) *
+ (temp - table[i].temp);
+ tmp /= table[i - 1].temp - table[i].temp;
+ resist = tmp + table[i].resistance;
+ } else if (i == 0) {
+ resist = table[0].resistance;
+ } else {
+ resist = table[table_len - 1].resistance;
+ }
+
+ return resist;
+}
+EXPORT_SYMBOL_GPL(power_supply_temp2resist_simple);
+
+/**
+ * power_supply_ocv2cap_simple() - find the battery capacity
+ * @table: Pointer to battery OCV lookup table
+ * @table_len: OCV table length
+ * @ocv: Current OCV value
+ *
+ * This helper function is used to look up battery capacity according to
+ * current OCV value from one OCV table, and the OCV table must be ordered
+ * descending.
+ *
+ * Return: the battery capacity.
+ */
+int power_supply_ocv2cap_simple(struct power_supply_battery_ocv_table *table,
+ int table_len, int ocv)
+{
+ int i, cap, tmp;
+
+ for (i = 0; i < table_len; i++)
+ if (ocv > table[i].ocv)
+ break;
+
+ if (i > 0 && i < table_len) {
+ tmp = (table[i - 1].capacity - table[i].capacity) *
+ (ocv - table[i].ocv);
+ tmp /= table[i - 1].ocv - table[i].ocv;
+ cap = tmp + table[i].capacity;
+ } else if (i == 0) {
+ cap = table[0].capacity;
+ } else {
+ cap = table[table_len - 1].capacity;
+ }
+
+ return cap;
+}
+EXPORT_SYMBOL_GPL(power_supply_ocv2cap_simple);
+
+struct power_supply_battery_ocv_table *
+power_supply_find_ocv2cap_table(struct power_supply_battery_info *info,
+ int temp, int *table_len)
+{
+ int best_temp_diff = INT_MAX, temp_diff;
+ u8 i, best_index = 0;
+
+ if (!info->ocv_table[0])
+ return NULL;
+
+ for (i = 0; i < POWER_SUPPLY_OCV_TEMP_MAX; i++) {
+ /* Out of capacity tables */
+ if (!info->ocv_table[i])
+ break;
+
+ temp_diff = abs(info->ocv_temp[i] - temp);
+
+ if (temp_diff < best_temp_diff) {
+ best_temp_diff = temp_diff;
+ best_index = i;
+ }
+ }
+
+ *table_len = info->ocv_table_size[best_index];
+ return info->ocv_table[best_index];
+}
+EXPORT_SYMBOL_GPL(power_supply_find_ocv2cap_table);
+
+int power_supply_batinfo_ocv2cap(struct power_supply_battery_info *info,
+ int ocv, int temp)
+{
+ struct power_supply_battery_ocv_table *table;
+ int table_len;
+
+ table = power_supply_find_ocv2cap_table(info, temp, &table_len);
+ if (!table)
+ return -EINVAL;
+
+ return power_supply_ocv2cap_simple(table, table_len, ocv);
+}
+EXPORT_SYMBOL_GPL(power_supply_batinfo_ocv2cap);
+
+int power_supply_get_property(struct power_supply *psy,
+ enum power_supply_property psp,
+ union power_supply_propval *val)
+{
+ if (atomic_read(&psy->use_cnt) <= 0) {
+ if (!psy->initialized)
+ return -EAGAIN;
+ return -ENODEV;
+ }
+
+ return psy->desc->get_property(psy, psp, val);
+}
+EXPORT_SYMBOL_GPL(power_supply_get_property);
+
+int power_supply_set_property(struct power_supply *psy,
+ enum power_supply_property psp,
+ const union power_supply_propval *val)
+{
+ if (atomic_read(&psy->use_cnt) <= 0 || !psy->desc->set_property)
+ return -ENODEV;
+
+ return psy->desc->set_property(psy, psp, val);
+}
+EXPORT_SYMBOL_GPL(power_supply_set_property);
+
+int power_supply_property_is_writeable(struct power_supply *psy,
+ enum power_supply_property psp)
+{
+ if (atomic_read(&psy->use_cnt) <= 0 ||
+ !psy->desc->property_is_writeable)
+ return -ENODEV;
+
+ return psy->desc->property_is_writeable(psy, psp);
+}
+EXPORT_SYMBOL_GPL(power_supply_property_is_writeable);
+
+void power_supply_external_power_changed(struct power_supply *psy)
+{
+ if (atomic_read(&psy->use_cnt) <= 0 ||
+ !psy->desc->external_power_changed)
+ return;
+
+ psy->desc->external_power_changed(psy);
+}
+EXPORT_SYMBOL_GPL(power_supply_external_power_changed);
+
+int power_supply_powers(struct power_supply *psy, struct device *dev)
+{
+ return sysfs_create_link(&psy->dev.kobj, &dev->kobj, "powers");
+}
+EXPORT_SYMBOL_GPL(power_supply_powers);
+
+static void power_supply_dev_release(struct device *dev)
+{
+ struct power_supply *psy = to_power_supply(dev);
+ dev_dbg(dev, "%s\n", __func__);
+ kfree(psy);
+}
+
+int power_supply_reg_notifier(struct notifier_block *nb)
+{
+ return atomic_notifier_chain_register(&power_supply_notifier, nb);
+}
+EXPORT_SYMBOL_GPL(power_supply_reg_notifier);
+
+void power_supply_unreg_notifier(struct notifier_block *nb)
+{
+ atomic_notifier_chain_unregister(&power_supply_notifier, nb);
+}
+EXPORT_SYMBOL_GPL(power_supply_unreg_notifier);
+
+#ifdef CONFIG_THERMAL
+static int power_supply_read_temp(struct thermal_zone_device *tzd,
+ int *temp)
+{
+ struct power_supply *psy;
+ union power_supply_propval val;
+ int ret;
+
+ WARN_ON(tzd == NULL);
+ psy = tzd->devdata;
+ ret = power_supply_get_property(psy, POWER_SUPPLY_PROP_TEMP, &val);
+ if (ret)
+ return ret;
+
+ /* Convert tenths of degree Celsius to milli degree Celsius. */
+ *temp = val.intval * 100;
+
+ return ret;
+}
+
+static struct thermal_zone_device_ops psy_tzd_ops = {
+ .get_temp = power_supply_read_temp,
+};
+
+static int psy_register_thermal(struct power_supply *psy)
+{
+ int i, ret;
+
+ if (psy->desc->no_thermal)
+ return 0;
+
+ /* Register battery zone device psy reports temperature */
+ for (i = 0; i < psy->desc->num_properties; i++) {
+ if (psy->desc->properties[i] == POWER_SUPPLY_PROP_TEMP) {
+ psy->tzd = thermal_zone_device_register(psy->desc->name,
+ 0, 0, psy, &psy_tzd_ops, NULL, 0, 0);
+ if (IS_ERR(psy->tzd))
+ return PTR_ERR(psy->tzd);
+ ret = thermal_zone_device_enable(psy->tzd);
+ if (ret)
+ thermal_zone_device_unregister(psy->tzd);
+ return ret;
+ }
+ }
+ return 0;
+}
+
+static void psy_unregister_thermal(struct power_supply *psy)
+{
+ if (IS_ERR_OR_NULL(psy->tzd))
+ return;
+ thermal_zone_device_unregister(psy->tzd);
+}
+
+/* thermal cooling device callbacks */
+static int ps_get_max_charge_cntl_limit(struct thermal_cooling_device *tcd,
+ unsigned long *state)
+{
+ struct power_supply *psy;
+ union power_supply_propval val;
+ int ret;
+
+ psy = tcd->devdata;
+ ret = power_supply_get_property(psy,
+ POWER_SUPPLY_PROP_CHARGE_CONTROL_LIMIT_MAX, &val);
+ if (ret)
+ return ret;
+
+ *state = val.intval;
+
+ return ret;
+}
+
+static int ps_get_cur_charge_cntl_limit(struct thermal_cooling_device *tcd,
+ unsigned long *state)
+{
+ struct power_supply *psy;
+ union power_supply_propval val;
+ int ret;
+
+ psy = tcd->devdata;
+ ret = power_supply_get_property(psy,
+ POWER_SUPPLY_PROP_CHARGE_CONTROL_LIMIT, &val);
+ if (ret)
+ return ret;
+
+ *state = val.intval;
+
+ return ret;
+}
+
+static int ps_set_cur_charge_cntl_limit(struct thermal_cooling_device *tcd,
+ unsigned long state)
+{
+ struct power_supply *psy;
+ union power_supply_propval val;
+ int ret;
+
+ psy = tcd->devdata;
+ val.intval = state;
+ ret = psy->desc->set_property(psy,
+ POWER_SUPPLY_PROP_CHARGE_CONTROL_LIMIT, &val);
+
+ return ret;
+}
+
+static const struct thermal_cooling_device_ops psy_tcd_ops = {
+ .get_max_state = ps_get_max_charge_cntl_limit,
+ .get_cur_state = ps_get_cur_charge_cntl_limit,
+ .set_cur_state = ps_set_cur_charge_cntl_limit,
+};
+
+static int psy_register_cooler(struct power_supply *psy)
+{
+ int i;
+
+ /* Register for cooling device if psy can control charging */
+ for (i = 0; i < psy->desc->num_properties; i++) {
+ if (psy->desc->properties[i] ==
+ POWER_SUPPLY_PROP_CHARGE_CONTROL_LIMIT) {
+ psy->tcd = thermal_cooling_device_register(
+ (char *)psy->desc->name,
+ psy, &psy_tcd_ops);
+ return PTR_ERR_OR_ZERO(psy->tcd);
+ }
+ }
+ return 0;
+}
+
+static void psy_unregister_cooler(struct power_supply *psy)
+{
+ if (IS_ERR_OR_NULL(psy->tcd))
+ return;
+ thermal_cooling_device_unregister(psy->tcd);
+}
+#else
+static int psy_register_thermal(struct power_supply *psy)
+{
+ return 0;
+}
+
+static void psy_unregister_thermal(struct power_supply *psy)
+{
+}
+
+static int psy_register_cooler(struct power_supply *psy)
+{
+ return 0;
+}
+
+static void psy_unregister_cooler(struct power_supply *psy)
+{
+}
+#endif
+
+static struct power_supply *__must_check
+__power_supply_register(struct device *parent,
+ const struct power_supply_desc *desc,
+ const struct power_supply_config *cfg,
+ bool ws)
+{
+ struct device *dev;
+ struct power_supply *psy;
+ int i, rc;
+
+ if (!parent)
+ pr_warn("%s: Expected proper parent device for '%s'\n",
+ __func__, desc->name);
+
+ if (!desc || !desc->name || !desc->properties || !desc->num_properties)
+ return ERR_PTR(-EINVAL);
+
+ for (i = 0; i < desc->num_properties; ++i) {
+ if ((desc->properties[i] == POWER_SUPPLY_PROP_USB_TYPE) &&
+ (!desc->usb_types || !desc->num_usb_types))
+ return ERR_PTR(-EINVAL);
+ }
+
+ psy = kzalloc(sizeof(*psy), GFP_KERNEL);
+ if (!psy)
+ return ERR_PTR(-ENOMEM);
+
+ dev = &psy->dev;
+
+ device_initialize(dev);
+
+ dev->class = power_supply_class;
+ dev->type = &power_supply_dev_type;
+ dev->parent = parent;
+ dev->release = power_supply_dev_release;
+ dev_set_drvdata(dev, psy);
+ psy->desc = desc;
+ if (cfg) {
+ dev->groups = cfg->attr_grp;
+ psy->drv_data = cfg->drv_data;
+ psy->of_node =
+ cfg->fwnode ? to_of_node(cfg->fwnode) : cfg->of_node;
+ psy->supplied_to = cfg->supplied_to;
+ psy->num_supplicants = cfg->num_supplicants;
+ }
+
+ rc = dev_set_name(dev, "%s", desc->name);
+ if (rc)
+ goto dev_set_name_failed;
+
+ INIT_WORK(&psy->changed_work, power_supply_changed_work);
+ INIT_DELAYED_WORK(&psy->deferred_register_work,
+ power_supply_deferred_register_work);
+
+ rc = power_supply_check_supplies(psy);
+ if (rc) {
+ dev_info(dev, "Not all required supplies found, defer probe\n");
+ goto check_supplies_failed;
+ }
+
+ spin_lock_init(&psy->changed_lock);
+ rc = device_add(dev);
+ if (rc)
+ goto device_add_failed;
+
+ rc = device_init_wakeup(dev, ws);
+ if (rc)
+ goto wakeup_init_failed;
+
+ rc = psy_register_thermal(psy);
+ if (rc)
+ goto register_thermal_failed;
+
+ rc = psy_register_cooler(psy);
+ if (rc)
+ goto register_cooler_failed;
+
+ rc = power_supply_create_triggers(psy);
+ if (rc)
+ goto create_triggers_failed;
+
+ rc = power_supply_add_hwmon_sysfs(psy);
+ if (rc)
+ goto add_hwmon_sysfs_failed;
+
+ /*
+ * Update use_cnt after any uevents (most notably from device_add()).
+ * We are here still during driver's probe but
+ * the power_supply_uevent() calls back driver's get_property
+ * method so:
+ * 1. Driver did not assigned the returned struct power_supply,
+ * 2. Driver could not finish initialization (anything in its probe
+ * after calling power_supply_register()).
+ */
+ atomic_inc(&psy->use_cnt);
+ psy->initialized = true;
+
+ queue_delayed_work(system_power_efficient_wq,
+ &psy->deferred_register_work,
+ POWER_SUPPLY_DEFERRED_REGISTER_TIME);
+
+ return psy;
+
+add_hwmon_sysfs_failed:
+ power_supply_remove_triggers(psy);
+create_triggers_failed:
+ psy_unregister_cooler(psy);
+register_cooler_failed:
+ psy_unregister_thermal(psy);
+register_thermal_failed:
+wakeup_init_failed:
+ device_del(dev);
+device_add_failed:
+check_supplies_failed:
+dev_set_name_failed:
+ put_device(dev);
+ return ERR_PTR(rc);
+}
+
+/**
+ * power_supply_register() - Register new power supply
+ * @parent: Device to be a parent of power supply's device, usually
+ * the device which probe function calls this
+ * @desc: Description of power supply, must be valid through whole
+ * lifetime of this power supply
+ * @cfg: Run-time specific configuration accessed during registering,
+ * may be NULL
+ *
+ * Return: A pointer to newly allocated power_supply on success
+ * or ERR_PTR otherwise.
+ * Use power_supply_unregister() on returned power_supply pointer to release
+ * resources.
+ */
+struct power_supply *__must_check power_supply_register(struct device *parent,
+ const struct power_supply_desc *desc,
+ const struct power_supply_config *cfg)
+{
+ return __power_supply_register(parent, desc, cfg, true);
+}
+EXPORT_SYMBOL_GPL(power_supply_register);
+
+/**
+ * power_supply_register_no_ws() - Register new non-waking-source power supply
+ * @parent: Device to be a parent of power supply's device, usually
+ * the device which probe function calls this
+ * @desc: Description of power supply, must be valid through whole
+ * lifetime of this power supply
+ * @cfg: Run-time specific configuration accessed during registering,
+ * may be NULL
+ *
+ * Return: A pointer to newly allocated power_supply on success
+ * or ERR_PTR otherwise.
+ * Use power_supply_unregister() on returned power_supply pointer to release
+ * resources.
+ */
+struct power_supply *__must_check
+power_supply_register_no_ws(struct device *parent,
+ const struct power_supply_desc *desc,
+ const struct power_supply_config *cfg)
+{
+ return __power_supply_register(parent, desc, cfg, false);
+}
+EXPORT_SYMBOL_GPL(power_supply_register_no_ws);
+
+static void devm_power_supply_release(struct device *dev, void *res)
+{
+ struct power_supply **psy = res;
+
+ power_supply_unregister(*psy);
+}
+
+/**
+ * devm_power_supply_register() - Register managed power supply
+ * @parent: Device to be a parent of power supply's device, usually
+ * the device which probe function calls this
+ * @desc: Description of power supply, must be valid through whole
+ * lifetime of this power supply
+ * @cfg: Run-time specific configuration accessed during registering,
+ * may be NULL
+ *
+ * Return: A pointer to newly allocated power_supply on success
+ * or ERR_PTR otherwise.
+ * The returned power_supply pointer will be automatically unregistered
+ * on driver detach.
+ */
+struct power_supply *__must_check
+devm_power_supply_register(struct device *parent,
+ const struct power_supply_desc *desc,
+ const struct power_supply_config *cfg)
+{
+ struct power_supply **ptr, *psy;
+
+ ptr = devres_alloc(devm_power_supply_release, sizeof(*ptr), GFP_KERNEL);
+
+ if (!ptr)
+ return ERR_PTR(-ENOMEM);
+ psy = __power_supply_register(parent, desc, cfg, true);
+ if (IS_ERR(psy)) {
+ devres_free(ptr);
+ } else {
+ *ptr = psy;
+ devres_add(parent, ptr);
+ }
+ return psy;
+}
+EXPORT_SYMBOL_GPL(devm_power_supply_register);
+
+/**
+ * devm_power_supply_register_no_ws() - Register managed non-waking-source power supply
+ * @parent: Device to be a parent of power supply's device, usually
+ * the device which probe function calls this
+ * @desc: Description of power supply, must be valid through whole
+ * lifetime of this power supply
+ * @cfg: Run-time specific configuration accessed during registering,
+ * may be NULL
+ *
+ * Return: A pointer to newly allocated power_supply on success
+ * or ERR_PTR otherwise.
+ * The returned power_supply pointer will be automatically unregistered
+ * on driver detach.
+ */
+struct power_supply *__must_check
+devm_power_supply_register_no_ws(struct device *parent,
+ const struct power_supply_desc *desc,
+ const struct power_supply_config *cfg)
+{
+ struct power_supply **ptr, *psy;
+
+ ptr = devres_alloc(devm_power_supply_release, sizeof(*ptr), GFP_KERNEL);
+
+ if (!ptr)
+ return ERR_PTR(-ENOMEM);
+ psy = __power_supply_register(parent, desc, cfg, false);
+ if (IS_ERR(psy)) {
+ devres_free(ptr);
+ } else {
+ *ptr = psy;
+ devres_add(parent, ptr);
+ }
+ return psy;
+}
+EXPORT_SYMBOL_GPL(devm_power_supply_register_no_ws);
+
+/**
+ * power_supply_unregister() - Remove this power supply from system
+ * @psy: Pointer to power supply to unregister
+ *
+ * Remove this power supply from the system. The resources of power supply
+ * will be freed here or on last power_supply_put() call.
+ */
+void power_supply_unregister(struct power_supply *psy)
+{
+ WARN_ON(atomic_dec_return(&psy->use_cnt));
+ psy->removing = true;
+ cancel_work_sync(&psy->changed_work);
+ cancel_delayed_work_sync(&psy->deferred_register_work);
+ sysfs_remove_link(&psy->dev.kobj, "powers");
+ power_supply_remove_hwmon_sysfs(psy);
+ power_supply_remove_triggers(psy);
+ psy_unregister_cooler(psy);
+ psy_unregister_thermal(psy);
+ device_init_wakeup(&psy->dev, false);
+ device_unregister(&psy->dev);
+}
+EXPORT_SYMBOL_GPL(power_supply_unregister);
+
+void *power_supply_get_drvdata(struct power_supply *psy)
+{
+ return psy->drv_data;
+}
+EXPORT_SYMBOL_GPL(power_supply_get_drvdata);
+
+static int __init power_supply_class_init(void)
+{
+ power_supply_class = class_create(THIS_MODULE, "power_supply");
+
+ if (IS_ERR(power_supply_class))
+ return PTR_ERR(power_supply_class);
+
+ power_supply_class->dev_uevent = power_supply_uevent;
+ power_supply_init_attrs(&power_supply_dev_type);
+
+ return 0;
+}
+
+static void __exit power_supply_class_exit(void)
+{
+ class_destroy(power_supply_class);
+}
+
+subsys_initcall(power_supply_class_init);
+module_exit(power_supply_class_exit);
+
+MODULE_DESCRIPTION("Universal power supply monitor class");
+MODULE_AUTHOR("Ian Molton <spyro@f2s.com>, "
+ "Szabolcs Gyurko, "
+ "Anton Vorontsov <cbou@mail.ru>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/power/supply/power_supply_hwmon.c b/drivers/power/supply/power_supply_hwmon.c
new file mode 100644
index 000000000..7fe4b6b6d
--- /dev/null
+++ b/drivers/power/supply/power_supply_hwmon.c
@@ -0,0 +1,422 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * power_supply_hwmon.c - power supply hwmon support.
+ */
+
+#include <linux/err.h>
+#include <linux/hwmon.h>
+#include <linux/power_supply.h>
+#include <linux/slab.h>
+
+struct power_supply_hwmon {
+ struct power_supply *psy;
+ unsigned long *props;
+};
+
+static const char *const ps_temp_label[] = {
+ "temp",
+ "ambient temp",
+};
+
+static int power_supply_hwmon_in_to_property(u32 attr)
+{
+ switch (attr) {
+ case hwmon_in_average:
+ return POWER_SUPPLY_PROP_VOLTAGE_AVG;
+ case hwmon_in_min:
+ return POWER_SUPPLY_PROP_VOLTAGE_MIN;
+ case hwmon_in_max:
+ return POWER_SUPPLY_PROP_VOLTAGE_MAX;
+ case hwmon_in_input:
+ return POWER_SUPPLY_PROP_VOLTAGE_NOW;
+ default:
+ return -EINVAL;
+ }
+}
+
+static int power_supply_hwmon_curr_to_property(u32 attr)
+{
+ switch (attr) {
+ case hwmon_curr_average:
+ return POWER_SUPPLY_PROP_CURRENT_AVG;
+ case hwmon_curr_max:
+ return POWER_SUPPLY_PROP_CURRENT_MAX;
+ case hwmon_curr_input:
+ return POWER_SUPPLY_PROP_CURRENT_NOW;
+ default:
+ return -EINVAL;
+ }
+}
+
+static int power_supply_hwmon_temp_to_property(u32 attr, int channel)
+{
+ if (channel) {
+ switch (attr) {
+ case hwmon_temp_input:
+ return POWER_SUPPLY_PROP_TEMP_AMBIENT;
+ case hwmon_temp_min_alarm:
+ return POWER_SUPPLY_PROP_TEMP_AMBIENT_ALERT_MIN;
+ case hwmon_temp_max_alarm:
+ return POWER_SUPPLY_PROP_TEMP_AMBIENT_ALERT_MAX;
+ default:
+ break;
+ }
+ } else {
+ switch (attr) {
+ case hwmon_temp_input:
+ return POWER_SUPPLY_PROP_TEMP;
+ case hwmon_temp_max:
+ return POWER_SUPPLY_PROP_TEMP_MAX;
+ case hwmon_temp_min:
+ return POWER_SUPPLY_PROP_TEMP_MIN;
+ case hwmon_temp_min_alarm:
+ return POWER_SUPPLY_PROP_TEMP_ALERT_MIN;
+ case hwmon_temp_max_alarm:
+ return POWER_SUPPLY_PROP_TEMP_ALERT_MAX;
+ default:
+ break;
+ }
+ }
+
+ return -EINVAL;
+}
+
+static int
+power_supply_hwmon_to_property(enum hwmon_sensor_types type,
+ u32 attr, int channel)
+{
+ switch (type) {
+ case hwmon_in:
+ return power_supply_hwmon_in_to_property(attr);
+ case hwmon_curr:
+ return power_supply_hwmon_curr_to_property(attr);
+ case hwmon_temp:
+ return power_supply_hwmon_temp_to_property(attr, channel);
+ default:
+ return -EINVAL;
+ }
+}
+
+static bool power_supply_hwmon_is_a_label(enum hwmon_sensor_types type,
+ u32 attr)
+{
+ return type == hwmon_temp && attr == hwmon_temp_label;
+}
+
+struct hwmon_type_attr_list {
+ const u32 *attrs;
+ size_t n_attrs;
+};
+
+static const u32 ps_temp_attrs[] = {
+ hwmon_temp_input,
+ hwmon_temp_min, hwmon_temp_max,
+ hwmon_temp_min_alarm, hwmon_temp_max_alarm,
+};
+
+static const struct hwmon_type_attr_list ps_type_attrs[hwmon_max] = {
+ [hwmon_temp] = { ps_temp_attrs, ARRAY_SIZE(ps_temp_attrs) },
+};
+
+static bool power_supply_hwmon_has_input(
+ const struct power_supply_hwmon *psyhw,
+ enum hwmon_sensor_types type, int channel)
+{
+ const struct hwmon_type_attr_list *attr_list = &ps_type_attrs[type];
+ size_t i;
+
+ for (i = 0; i < attr_list->n_attrs; ++i) {
+ int prop = power_supply_hwmon_to_property(type,
+ attr_list->attrs[i], channel);
+
+ if (prop >= 0 && test_bit(prop, psyhw->props))
+ return true;
+ }
+
+ return false;
+}
+
+static bool power_supply_hwmon_is_writable(enum hwmon_sensor_types type,
+ u32 attr)
+{
+ switch (type) {
+ case hwmon_in:
+ return attr == hwmon_in_min ||
+ attr == hwmon_in_max;
+ case hwmon_curr:
+ return attr == hwmon_curr_max;
+ case hwmon_temp:
+ return attr == hwmon_temp_max ||
+ attr == hwmon_temp_min ||
+ attr == hwmon_temp_min_alarm ||
+ attr == hwmon_temp_max_alarm;
+ default:
+ return false;
+ }
+}
+
+static umode_t power_supply_hwmon_is_visible(const void *data,
+ enum hwmon_sensor_types type,
+ u32 attr, int channel)
+{
+ const struct power_supply_hwmon *psyhw = data;
+ int prop;
+
+ if (power_supply_hwmon_is_a_label(type, attr)) {
+ if (power_supply_hwmon_has_input(psyhw, type, channel))
+ return 0444;
+ else
+ return 0;
+ }
+
+ prop = power_supply_hwmon_to_property(type, attr, channel);
+ if (prop < 0 || !test_bit(prop, psyhw->props))
+ return 0;
+
+ if (power_supply_property_is_writeable(psyhw->psy, prop) > 0 &&
+ power_supply_hwmon_is_writable(type, attr))
+ return 0644;
+
+ return 0444;
+}
+
+static int power_supply_hwmon_read_string(struct device *dev,
+ enum hwmon_sensor_types type,
+ u32 attr, int channel,
+ const char **str)
+{
+ switch (type) {
+ case hwmon_temp:
+ *str = ps_temp_label[channel];
+ break;
+ default:
+ /* unreachable, but see:
+ * gcc bug #51513 [1] and clang bug #978 [2]
+ *
+ * [1] https://gcc.gnu.org/bugzilla/show_bug.cgi?id=51513
+ * [2] https://github.com/ClangBuiltLinux/linux/issues/978
+ */
+ break;
+ }
+
+ return 0;
+}
+
+static int
+power_supply_hwmon_read(struct device *dev, enum hwmon_sensor_types type,
+ u32 attr, int channel, long *val)
+{
+ struct power_supply_hwmon *psyhw = dev_get_drvdata(dev);
+ struct power_supply *psy = psyhw->psy;
+ union power_supply_propval pspval;
+ int ret, prop;
+
+ prop = power_supply_hwmon_to_property(type, attr, channel);
+ if (prop < 0)
+ return prop;
+
+ ret = power_supply_get_property(psy, prop, &pspval);
+ if (ret)
+ return ret;
+
+ switch (type) {
+ /*
+ * Both voltage and current is reported in units of
+ * microvolts/microamps, so we need to adjust it to
+ * milliamps(volts)
+ */
+ case hwmon_curr:
+ case hwmon_in:
+ pspval.intval = DIV_ROUND_CLOSEST(pspval.intval, 1000);
+ break;
+ /*
+ * Temp needs to be converted from 1/10 C to milli-C
+ */
+ case hwmon_temp:
+ if (check_mul_overflow(pspval.intval, 100,
+ &pspval.intval))
+ return -EOVERFLOW;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ *val = pspval.intval;
+
+ return 0;
+}
+
+static int
+power_supply_hwmon_write(struct device *dev, enum hwmon_sensor_types type,
+ u32 attr, int channel, long val)
+{
+ struct power_supply_hwmon *psyhw = dev_get_drvdata(dev);
+ struct power_supply *psy = psyhw->psy;
+ union power_supply_propval pspval;
+ int prop;
+
+ prop = power_supply_hwmon_to_property(type, attr, channel);
+ if (prop < 0)
+ return prop;
+
+ pspval.intval = val;
+
+ switch (type) {
+ /*
+ * Both voltage and current is reported in units of
+ * microvolts/microamps, so we need to adjust it to
+ * milliamps(volts)
+ */
+ case hwmon_curr:
+ case hwmon_in:
+ if (check_mul_overflow(pspval.intval, 1000,
+ &pspval.intval))
+ return -EOVERFLOW;
+ break;
+ /*
+ * Temp needs to be converted from 1/10 C to milli-C
+ */
+ case hwmon_temp:
+ pspval.intval = DIV_ROUND_CLOSEST(pspval.intval, 100);
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return power_supply_set_property(psy, prop, &pspval);
+}
+
+static const struct hwmon_ops power_supply_hwmon_ops = {
+ .is_visible = power_supply_hwmon_is_visible,
+ .read = power_supply_hwmon_read,
+ .write = power_supply_hwmon_write,
+ .read_string = power_supply_hwmon_read_string,
+};
+
+static const struct hwmon_channel_info *power_supply_hwmon_info[] = {
+ HWMON_CHANNEL_INFO(temp,
+ HWMON_T_LABEL |
+ HWMON_T_INPUT |
+ HWMON_T_MAX |
+ HWMON_T_MIN |
+ HWMON_T_MIN_ALARM |
+ HWMON_T_MIN_ALARM,
+
+ HWMON_T_LABEL |
+ HWMON_T_INPUT |
+ HWMON_T_MIN_ALARM |
+ HWMON_T_LABEL |
+ HWMON_T_MAX_ALARM),
+
+ HWMON_CHANNEL_INFO(curr,
+ HWMON_C_AVERAGE |
+ HWMON_C_MAX |
+ HWMON_C_INPUT),
+
+ HWMON_CHANNEL_INFO(in,
+ HWMON_I_AVERAGE |
+ HWMON_I_MIN |
+ HWMON_I_MAX |
+ HWMON_I_INPUT),
+ NULL
+};
+
+static const struct hwmon_chip_info power_supply_hwmon_chip_info = {
+ .ops = &power_supply_hwmon_ops,
+ .info = power_supply_hwmon_info,
+};
+
+static void power_supply_hwmon_bitmap_free(void *data)
+{
+ bitmap_free(data);
+}
+
+int power_supply_add_hwmon_sysfs(struct power_supply *psy)
+{
+ const struct power_supply_desc *desc = psy->desc;
+ struct power_supply_hwmon *psyhw;
+ struct device *dev = &psy->dev;
+ struct device *hwmon;
+ int ret, i;
+ const char *name;
+
+ if (!devres_open_group(dev, power_supply_add_hwmon_sysfs,
+ GFP_KERNEL))
+ return -ENOMEM;
+
+ psyhw = devm_kzalloc(dev, sizeof(*psyhw), GFP_KERNEL);
+ if (!psyhw) {
+ ret = -ENOMEM;
+ goto error;
+ }
+
+ psyhw->psy = psy;
+ psyhw->props = bitmap_zalloc(POWER_SUPPLY_PROP_TIME_TO_FULL_AVG + 1,
+ GFP_KERNEL);
+ if (!psyhw->props) {
+ ret = -ENOMEM;
+ goto error;
+ }
+
+ ret = devm_add_action_or_reset(dev, power_supply_hwmon_bitmap_free,
+ psyhw->props);
+ if (ret)
+ goto error;
+
+ for (i = 0; i < desc->num_properties; i++) {
+ const enum power_supply_property prop = desc->properties[i];
+
+ switch (prop) {
+ case POWER_SUPPLY_PROP_CURRENT_AVG:
+ case POWER_SUPPLY_PROP_CURRENT_MAX:
+ case POWER_SUPPLY_PROP_CURRENT_NOW:
+ case POWER_SUPPLY_PROP_TEMP:
+ case POWER_SUPPLY_PROP_TEMP_MAX:
+ case POWER_SUPPLY_PROP_TEMP_MIN:
+ case POWER_SUPPLY_PROP_TEMP_ALERT_MIN:
+ case POWER_SUPPLY_PROP_TEMP_ALERT_MAX:
+ case POWER_SUPPLY_PROP_TEMP_AMBIENT:
+ case POWER_SUPPLY_PROP_TEMP_AMBIENT_ALERT_MIN:
+ case POWER_SUPPLY_PROP_TEMP_AMBIENT_ALERT_MAX:
+ case POWER_SUPPLY_PROP_VOLTAGE_AVG:
+ case POWER_SUPPLY_PROP_VOLTAGE_MIN:
+ case POWER_SUPPLY_PROP_VOLTAGE_MAX:
+ case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+ set_bit(prop, psyhw->props);
+ break;
+ default:
+ break;
+ }
+ }
+
+ name = psy->desc->name;
+ if (strchr(name, '-')) {
+ char *new_name;
+
+ new_name = devm_kstrdup(dev, name, GFP_KERNEL);
+ if (!new_name) {
+ ret = -ENOMEM;
+ goto error;
+ }
+ strreplace(new_name, '-', '_');
+ name = new_name;
+ }
+ hwmon = devm_hwmon_device_register_with_info(dev, name,
+ psyhw,
+ &power_supply_hwmon_chip_info,
+ NULL);
+ ret = PTR_ERR_OR_ZERO(hwmon);
+ if (ret)
+ goto error;
+
+ devres_close_group(dev, power_supply_add_hwmon_sysfs);
+ return 0;
+error:
+ devres_release_group(dev, NULL);
+ return ret;
+}
+
+void power_supply_remove_hwmon_sysfs(struct power_supply *psy)
+{
+ devres_release_group(&psy->dev, power_supply_add_hwmon_sysfs);
+}
diff --git a/drivers/power/supply/power_supply_leds.c b/drivers/power/supply/power_supply_leds.c
new file mode 100644
index 000000000..b7a2778f8
--- /dev/null
+++ b/drivers/power/supply/power_supply_leds.c
@@ -0,0 +1,170 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * LEDs triggers for power supply class
+ *
+ * Copyright © 2007 Anton Vorontsov <cbou@mail.ru>
+ * Copyright © 2004 Szabolcs Gyurko
+ * Copyright © 2003 Ian Molton <spyro@f2s.com>
+ *
+ * Modified: 2004, Oct Szabolcs Gyurko
+ */
+
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/power_supply.h>
+#include <linux/slab.h>
+
+#include "power_supply.h"
+
+/* Battery specific LEDs triggers. */
+
+static void power_supply_update_bat_leds(struct power_supply *psy)
+{
+ union power_supply_propval status;
+ unsigned long delay_on = 0;
+ unsigned long delay_off = 0;
+
+ if (power_supply_get_property(psy, POWER_SUPPLY_PROP_STATUS, &status))
+ return;
+
+ dev_dbg(&psy->dev, "%s %d\n", __func__, status.intval);
+
+ switch (status.intval) {
+ case POWER_SUPPLY_STATUS_FULL:
+ led_trigger_event(psy->charging_full_trig, LED_FULL);
+ led_trigger_event(psy->charging_trig, LED_OFF);
+ led_trigger_event(psy->full_trig, LED_FULL);
+ /* Going from blink to LED on requires a LED_OFF event to stop blink */
+ led_trigger_event(psy->charging_blink_full_solid_trig, LED_OFF);
+ led_trigger_event(psy->charging_blink_full_solid_trig, LED_FULL);
+ break;
+ case POWER_SUPPLY_STATUS_CHARGING:
+ led_trigger_event(psy->charging_full_trig, LED_FULL);
+ led_trigger_event(psy->charging_trig, LED_FULL);
+ led_trigger_event(psy->full_trig, LED_OFF);
+ led_trigger_blink(psy->charging_blink_full_solid_trig,
+ &delay_on, &delay_off);
+ break;
+ default:
+ led_trigger_event(psy->charging_full_trig, LED_OFF);
+ led_trigger_event(psy->charging_trig, LED_OFF);
+ led_trigger_event(psy->full_trig, LED_OFF);
+ led_trigger_event(psy->charging_blink_full_solid_trig,
+ LED_OFF);
+ break;
+ }
+}
+
+static int power_supply_create_bat_triggers(struct power_supply *psy)
+{
+ psy->charging_full_trig_name = kasprintf(GFP_KERNEL,
+ "%s-charging-or-full", psy->desc->name);
+ if (!psy->charging_full_trig_name)
+ goto charging_full_failed;
+
+ psy->charging_trig_name = kasprintf(GFP_KERNEL,
+ "%s-charging", psy->desc->name);
+ if (!psy->charging_trig_name)
+ goto charging_failed;
+
+ psy->full_trig_name = kasprintf(GFP_KERNEL, "%s-full", psy->desc->name);
+ if (!psy->full_trig_name)
+ goto full_failed;
+
+ psy->charging_blink_full_solid_trig_name = kasprintf(GFP_KERNEL,
+ "%s-charging-blink-full-solid", psy->desc->name);
+ if (!psy->charging_blink_full_solid_trig_name)
+ goto charging_blink_full_solid_failed;
+
+ led_trigger_register_simple(psy->charging_full_trig_name,
+ &psy->charging_full_trig);
+ led_trigger_register_simple(psy->charging_trig_name,
+ &psy->charging_trig);
+ led_trigger_register_simple(psy->full_trig_name,
+ &psy->full_trig);
+ led_trigger_register_simple(psy->charging_blink_full_solid_trig_name,
+ &psy->charging_blink_full_solid_trig);
+
+ return 0;
+
+charging_blink_full_solid_failed:
+ kfree(psy->full_trig_name);
+full_failed:
+ kfree(psy->charging_trig_name);
+charging_failed:
+ kfree(psy->charging_full_trig_name);
+charging_full_failed:
+ return -ENOMEM;
+}
+
+static void power_supply_remove_bat_triggers(struct power_supply *psy)
+{
+ led_trigger_unregister_simple(psy->charging_full_trig);
+ led_trigger_unregister_simple(psy->charging_trig);
+ led_trigger_unregister_simple(psy->full_trig);
+ led_trigger_unregister_simple(psy->charging_blink_full_solid_trig);
+ kfree(psy->charging_blink_full_solid_trig_name);
+ kfree(psy->full_trig_name);
+ kfree(psy->charging_trig_name);
+ kfree(psy->charging_full_trig_name);
+}
+
+/* Generated power specific LEDs triggers. */
+
+static void power_supply_update_gen_leds(struct power_supply *psy)
+{
+ union power_supply_propval online;
+
+ if (power_supply_get_property(psy, POWER_SUPPLY_PROP_ONLINE, &online))
+ return;
+
+ dev_dbg(&psy->dev, "%s %d\n", __func__, online.intval);
+
+ if (online.intval)
+ led_trigger_event(psy->online_trig, LED_FULL);
+ else
+ led_trigger_event(psy->online_trig, LED_OFF);
+}
+
+static int power_supply_create_gen_triggers(struct power_supply *psy)
+{
+ psy->online_trig_name = kasprintf(GFP_KERNEL, "%s-online",
+ psy->desc->name);
+ if (!psy->online_trig_name)
+ return -ENOMEM;
+
+ led_trigger_register_simple(psy->online_trig_name, &psy->online_trig);
+
+ return 0;
+}
+
+static void power_supply_remove_gen_triggers(struct power_supply *psy)
+{
+ led_trigger_unregister_simple(psy->online_trig);
+ kfree(psy->online_trig_name);
+}
+
+/* Choice what triggers to create&update. */
+
+void power_supply_update_leds(struct power_supply *psy)
+{
+ if (psy->desc->type == POWER_SUPPLY_TYPE_BATTERY)
+ power_supply_update_bat_leds(psy);
+ else
+ power_supply_update_gen_leds(psy);
+}
+
+int power_supply_create_triggers(struct power_supply *psy)
+{
+ if (psy->desc->type == POWER_SUPPLY_TYPE_BATTERY)
+ return power_supply_create_bat_triggers(psy);
+ return power_supply_create_gen_triggers(psy);
+}
+
+void power_supply_remove_triggers(struct power_supply *psy)
+{
+ if (psy->desc->type == POWER_SUPPLY_TYPE_BATTERY)
+ power_supply_remove_bat_triggers(psy);
+ else
+ power_supply_remove_gen_triggers(psy);
+}
diff --git a/drivers/power/supply/power_supply_sysfs.c b/drivers/power/supply/power_supply_sysfs.c
new file mode 100644
index 000000000..2b1df9c33
--- /dev/null
+++ b/drivers/power/supply/power_supply_sysfs.c
@@ -0,0 +1,487 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Sysfs interface for the universal power supply monitor class
+ *
+ * Copyright © 2007 David Woodhouse <dwmw2@infradead.org>
+ * Copyright © 2007 Anton Vorontsov <cbou@mail.ru>
+ * Copyright © 2004 Szabolcs Gyurko
+ * Copyright © 2003 Ian Molton <spyro@f2s.com>
+ *
+ * Modified: 2004, Oct Szabolcs Gyurko
+ */
+
+#include <linux/ctype.h>
+#include <linux/device.h>
+#include <linux/power_supply.h>
+#include <linux/slab.h>
+#include <linux/stat.h>
+
+#include "power_supply.h"
+
+#define MAX_PROP_NAME_LEN 30
+
+struct power_supply_attr {
+ const char *prop_name;
+ char attr_name[MAX_PROP_NAME_LEN + 1];
+ struct device_attribute dev_attr;
+ const char * const *text_values;
+ int text_values_len;
+};
+
+#define _POWER_SUPPLY_ATTR(_name, _text, _len) \
+[POWER_SUPPLY_PROP_ ## _name] = \
+{ \
+ .prop_name = #_name, \
+ .attr_name = #_name "\0", \
+ .text_values = _text, \
+ .text_values_len = _len, \
+}
+
+#define POWER_SUPPLY_ATTR(_name) _POWER_SUPPLY_ATTR(_name, NULL, 0)
+#define _POWER_SUPPLY_ENUM_ATTR(_name, _text) \
+ _POWER_SUPPLY_ATTR(_name, _text, ARRAY_SIZE(_text))
+#define POWER_SUPPLY_ENUM_ATTR(_name) \
+ _POWER_SUPPLY_ENUM_ATTR(_name, POWER_SUPPLY_ ## _name ## _TEXT)
+
+static const char * const POWER_SUPPLY_TYPE_TEXT[] = {
+ [POWER_SUPPLY_TYPE_UNKNOWN] = "Unknown",
+ [POWER_SUPPLY_TYPE_BATTERY] = "Battery",
+ [POWER_SUPPLY_TYPE_UPS] = "UPS",
+ [POWER_SUPPLY_TYPE_MAINS] = "Mains",
+ [POWER_SUPPLY_TYPE_USB] = "USB",
+ [POWER_SUPPLY_TYPE_USB_DCP] = "USB_DCP",
+ [POWER_SUPPLY_TYPE_USB_CDP] = "USB_CDP",
+ [POWER_SUPPLY_TYPE_USB_ACA] = "USB_ACA",
+ [POWER_SUPPLY_TYPE_USB_TYPE_C] = "USB_C",
+ [POWER_SUPPLY_TYPE_USB_PD] = "USB_PD",
+ [POWER_SUPPLY_TYPE_USB_PD_DRP] = "USB_PD_DRP",
+ [POWER_SUPPLY_TYPE_APPLE_BRICK_ID] = "BrickID",
+ [POWER_SUPPLY_TYPE_WIRELESS] = "Wireless",
+};
+
+static const char * const POWER_SUPPLY_USB_TYPE_TEXT[] = {
+ [POWER_SUPPLY_USB_TYPE_UNKNOWN] = "Unknown",
+ [POWER_SUPPLY_USB_TYPE_SDP] = "SDP",
+ [POWER_SUPPLY_USB_TYPE_DCP] = "DCP",
+ [POWER_SUPPLY_USB_TYPE_CDP] = "CDP",
+ [POWER_SUPPLY_USB_TYPE_ACA] = "ACA",
+ [POWER_SUPPLY_USB_TYPE_C] = "C",
+ [POWER_SUPPLY_USB_TYPE_PD] = "PD",
+ [POWER_SUPPLY_USB_TYPE_PD_DRP] = "PD_DRP",
+ [POWER_SUPPLY_USB_TYPE_PD_PPS] = "PD_PPS",
+ [POWER_SUPPLY_USB_TYPE_APPLE_BRICK_ID] = "BrickID",
+};
+
+static const char * const POWER_SUPPLY_STATUS_TEXT[] = {
+ [POWER_SUPPLY_STATUS_UNKNOWN] = "Unknown",
+ [POWER_SUPPLY_STATUS_CHARGING] = "Charging",
+ [POWER_SUPPLY_STATUS_DISCHARGING] = "Discharging",
+ [POWER_SUPPLY_STATUS_NOT_CHARGING] = "Not charging",
+ [POWER_SUPPLY_STATUS_FULL] = "Full",
+};
+
+static const char * const POWER_SUPPLY_CHARGE_TYPE_TEXT[] = {
+ [POWER_SUPPLY_CHARGE_TYPE_UNKNOWN] = "Unknown",
+ [POWER_SUPPLY_CHARGE_TYPE_NONE] = "N/A",
+ [POWER_SUPPLY_CHARGE_TYPE_TRICKLE] = "Trickle",
+ [POWER_SUPPLY_CHARGE_TYPE_FAST] = "Fast",
+ [POWER_SUPPLY_CHARGE_TYPE_STANDARD] = "Standard",
+ [POWER_SUPPLY_CHARGE_TYPE_ADAPTIVE] = "Adaptive",
+ [POWER_SUPPLY_CHARGE_TYPE_CUSTOM] = "Custom",
+ [POWER_SUPPLY_CHARGE_TYPE_LONGLIFE] = "Long Life",
+};
+
+static const char * const POWER_SUPPLY_HEALTH_TEXT[] = {
+ [POWER_SUPPLY_HEALTH_UNKNOWN] = "Unknown",
+ [POWER_SUPPLY_HEALTH_GOOD] = "Good",
+ [POWER_SUPPLY_HEALTH_OVERHEAT] = "Overheat",
+ [POWER_SUPPLY_HEALTH_DEAD] = "Dead",
+ [POWER_SUPPLY_HEALTH_OVERVOLTAGE] = "Over voltage",
+ [POWER_SUPPLY_HEALTH_UNSPEC_FAILURE] = "Unspecified failure",
+ [POWER_SUPPLY_HEALTH_COLD] = "Cold",
+ [POWER_SUPPLY_HEALTH_WATCHDOG_TIMER_EXPIRE] = "Watchdog timer expire",
+ [POWER_SUPPLY_HEALTH_SAFETY_TIMER_EXPIRE] = "Safety timer expire",
+ [POWER_SUPPLY_HEALTH_OVERCURRENT] = "Over current",
+ [POWER_SUPPLY_HEALTH_CALIBRATION_REQUIRED] = "Calibration required",
+ [POWER_SUPPLY_HEALTH_WARM] = "Warm",
+ [POWER_SUPPLY_HEALTH_COOL] = "Cool",
+ [POWER_SUPPLY_HEALTH_HOT] = "Hot",
+};
+
+static const char * const POWER_SUPPLY_TECHNOLOGY_TEXT[] = {
+ [POWER_SUPPLY_TECHNOLOGY_UNKNOWN] = "Unknown",
+ [POWER_SUPPLY_TECHNOLOGY_NiMH] = "NiMH",
+ [POWER_SUPPLY_TECHNOLOGY_LION] = "Li-ion",
+ [POWER_SUPPLY_TECHNOLOGY_LIPO] = "Li-poly",
+ [POWER_SUPPLY_TECHNOLOGY_LiFe] = "LiFe",
+ [POWER_SUPPLY_TECHNOLOGY_NiCd] = "NiCd",
+ [POWER_SUPPLY_TECHNOLOGY_LiMn] = "LiMn",
+};
+
+static const char * const POWER_SUPPLY_CAPACITY_LEVEL_TEXT[] = {
+ [POWER_SUPPLY_CAPACITY_LEVEL_UNKNOWN] = "Unknown",
+ [POWER_SUPPLY_CAPACITY_LEVEL_CRITICAL] = "Critical",
+ [POWER_SUPPLY_CAPACITY_LEVEL_LOW] = "Low",
+ [POWER_SUPPLY_CAPACITY_LEVEL_NORMAL] = "Normal",
+ [POWER_SUPPLY_CAPACITY_LEVEL_HIGH] = "High",
+ [POWER_SUPPLY_CAPACITY_LEVEL_FULL] = "Full",
+};
+
+static const char * const POWER_SUPPLY_SCOPE_TEXT[] = {
+ [POWER_SUPPLY_SCOPE_UNKNOWN] = "Unknown",
+ [POWER_SUPPLY_SCOPE_SYSTEM] = "System",
+ [POWER_SUPPLY_SCOPE_DEVICE] = "Device",
+};
+
+static struct power_supply_attr power_supply_attrs[] = {
+ /* Properties of type `int' */
+ POWER_SUPPLY_ENUM_ATTR(STATUS),
+ POWER_SUPPLY_ENUM_ATTR(CHARGE_TYPE),
+ POWER_SUPPLY_ENUM_ATTR(HEALTH),
+ POWER_SUPPLY_ATTR(PRESENT),
+ POWER_SUPPLY_ATTR(ONLINE),
+ POWER_SUPPLY_ATTR(AUTHENTIC),
+ POWER_SUPPLY_ENUM_ATTR(TECHNOLOGY),
+ POWER_SUPPLY_ATTR(CYCLE_COUNT),
+ POWER_SUPPLY_ATTR(VOLTAGE_MAX),
+ POWER_SUPPLY_ATTR(VOLTAGE_MIN),
+ POWER_SUPPLY_ATTR(VOLTAGE_MAX_DESIGN),
+ POWER_SUPPLY_ATTR(VOLTAGE_MIN_DESIGN),
+ POWER_SUPPLY_ATTR(VOLTAGE_NOW),
+ POWER_SUPPLY_ATTR(VOLTAGE_AVG),
+ POWER_SUPPLY_ATTR(VOLTAGE_OCV),
+ POWER_SUPPLY_ATTR(VOLTAGE_BOOT),
+ POWER_SUPPLY_ATTR(CURRENT_MAX),
+ POWER_SUPPLY_ATTR(CURRENT_NOW),
+ POWER_SUPPLY_ATTR(CURRENT_AVG),
+ POWER_SUPPLY_ATTR(CURRENT_BOOT),
+ POWER_SUPPLY_ATTR(POWER_NOW),
+ POWER_SUPPLY_ATTR(POWER_AVG),
+ POWER_SUPPLY_ATTR(CHARGE_FULL_DESIGN),
+ POWER_SUPPLY_ATTR(CHARGE_EMPTY_DESIGN),
+ POWER_SUPPLY_ATTR(CHARGE_FULL),
+ POWER_SUPPLY_ATTR(CHARGE_EMPTY),
+ POWER_SUPPLY_ATTR(CHARGE_NOW),
+ POWER_SUPPLY_ATTR(CHARGE_AVG),
+ POWER_SUPPLY_ATTR(CHARGE_COUNTER),
+ POWER_SUPPLY_ATTR(CONSTANT_CHARGE_CURRENT),
+ POWER_SUPPLY_ATTR(CONSTANT_CHARGE_CURRENT_MAX),
+ POWER_SUPPLY_ATTR(CONSTANT_CHARGE_VOLTAGE),
+ POWER_SUPPLY_ATTR(CONSTANT_CHARGE_VOLTAGE_MAX),
+ POWER_SUPPLY_ATTR(CHARGE_CONTROL_LIMIT),
+ POWER_SUPPLY_ATTR(CHARGE_CONTROL_LIMIT_MAX),
+ POWER_SUPPLY_ATTR(CHARGE_CONTROL_START_THRESHOLD),
+ POWER_SUPPLY_ATTR(CHARGE_CONTROL_END_THRESHOLD),
+ POWER_SUPPLY_ATTR(INPUT_CURRENT_LIMIT),
+ POWER_SUPPLY_ATTR(INPUT_VOLTAGE_LIMIT),
+ POWER_SUPPLY_ATTR(INPUT_POWER_LIMIT),
+ POWER_SUPPLY_ATTR(ENERGY_FULL_DESIGN),
+ POWER_SUPPLY_ATTR(ENERGY_EMPTY_DESIGN),
+ POWER_SUPPLY_ATTR(ENERGY_FULL),
+ POWER_SUPPLY_ATTR(ENERGY_EMPTY),
+ POWER_SUPPLY_ATTR(ENERGY_NOW),
+ POWER_SUPPLY_ATTR(ENERGY_AVG),
+ POWER_SUPPLY_ATTR(CAPACITY),
+ POWER_SUPPLY_ATTR(CAPACITY_ALERT_MIN),
+ POWER_SUPPLY_ATTR(CAPACITY_ALERT_MAX),
+ POWER_SUPPLY_ATTR(CAPACITY_ERROR_MARGIN),
+ POWER_SUPPLY_ENUM_ATTR(CAPACITY_LEVEL),
+ POWER_SUPPLY_ATTR(TEMP),
+ POWER_SUPPLY_ATTR(TEMP_MAX),
+ POWER_SUPPLY_ATTR(TEMP_MIN),
+ POWER_SUPPLY_ATTR(TEMP_ALERT_MIN),
+ POWER_SUPPLY_ATTR(TEMP_ALERT_MAX),
+ POWER_SUPPLY_ATTR(TEMP_AMBIENT),
+ POWER_SUPPLY_ATTR(TEMP_AMBIENT_ALERT_MIN),
+ POWER_SUPPLY_ATTR(TEMP_AMBIENT_ALERT_MAX),
+ POWER_SUPPLY_ATTR(TIME_TO_EMPTY_NOW),
+ POWER_SUPPLY_ATTR(TIME_TO_EMPTY_AVG),
+ POWER_SUPPLY_ATTR(TIME_TO_FULL_NOW),
+ POWER_SUPPLY_ATTR(TIME_TO_FULL_AVG),
+ POWER_SUPPLY_ENUM_ATTR(TYPE),
+ POWER_SUPPLY_ATTR(USB_TYPE),
+ POWER_SUPPLY_ENUM_ATTR(SCOPE),
+ POWER_SUPPLY_ATTR(PRECHARGE_CURRENT),
+ POWER_SUPPLY_ATTR(CHARGE_TERM_CURRENT),
+ POWER_SUPPLY_ATTR(CALIBRATE),
+ POWER_SUPPLY_ATTR(MANUFACTURE_YEAR),
+ POWER_SUPPLY_ATTR(MANUFACTURE_MONTH),
+ POWER_SUPPLY_ATTR(MANUFACTURE_DAY),
+ /* Properties of type `const char *' */
+ POWER_SUPPLY_ATTR(MODEL_NAME),
+ POWER_SUPPLY_ATTR(MANUFACTURER),
+ POWER_SUPPLY_ATTR(SERIAL_NUMBER),
+};
+
+static struct attribute *
+__power_supply_attrs[ARRAY_SIZE(power_supply_attrs) + 1];
+
+static struct power_supply_attr *to_ps_attr(struct device_attribute *attr)
+{
+ return container_of(attr, struct power_supply_attr, dev_attr);
+}
+
+static enum power_supply_property dev_attr_psp(struct device_attribute *attr)
+{
+ return to_ps_attr(attr) - power_supply_attrs;
+}
+
+static ssize_t power_supply_show_usb_type(struct device *dev,
+ const struct power_supply_desc *desc,
+ union power_supply_propval *value,
+ char *buf)
+{
+ enum power_supply_usb_type usb_type;
+ ssize_t count = 0;
+ bool match = false;
+ int i;
+
+ for (i = 0; i < desc->num_usb_types; ++i) {
+ usb_type = desc->usb_types[i];
+
+ if (value->intval == usb_type) {
+ count += sprintf(buf + count, "[%s] ",
+ POWER_SUPPLY_USB_TYPE_TEXT[usb_type]);
+ match = true;
+ } else {
+ count += sprintf(buf + count, "%s ",
+ POWER_SUPPLY_USB_TYPE_TEXT[usb_type]);
+ }
+ }
+
+ if (!match) {
+ dev_warn(dev, "driver reporting unsupported connected type\n");
+ return -EINVAL;
+ }
+
+ if (count)
+ buf[count - 1] = '\n';
+
+ return count;
+}
+
+static ssize_t power_supply_show_property(struct device *dev,
+ struct device_attribute *attr,
+ char *buf) {
+ ssize_t ret;
+ struct power_supply *psy = dev_get_drvdata(dev);
+ struct power_supply_attr *ps_attr = to_ps_attr(attr);
+ enum power_supply_property psp = dev_attr_psp(attr);
+ union power_supply_propval value;
+
+ if (psp == POWER_SUPPLY_PROP_TYPE) {
+ value.intval = psy->desc->type;
+ } else {
+ ret = power_supply_get_property(psy, psp, &value);
+
+ if (ret < 0) {
+ if (ret == -ENODATA)
+ dev_dbg_ratelimited(dev,
+ "driver has no data for `%s' property\n",
+ attr->attr.name);
+ else if (ret != -ENODEV && ret != -EAGAIN)
+ dev_err_ratelimited(dev,
+ "driver failed to report `%s' property: %zd\n",
+ attr->attr.name, ret);
+ return ret;
+ }
+ }
+
+ if (ps_attr->text_values_len > 0 &&
+ value.intval < ps_attr->text_values_len && value.intval >= 0) {
+ return sprintf(buf, "%s\n", ps_attr->text_values[value.intval]);
+ }
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_USB_TYPE:
+ ret = power_supply_show_usb_type(dev, psy->desc,
+ &value, buf);
+ break;
+ case POWER_SUPPLY_PROP_MODEL_NAME ... POWER_SUPPLY_PROP_SERIAL_NUMBER:
+ ret = sprintf(buf, "%s\n", value.strval);
+ break;
+ default:
+ ret = sprintf(buf, "%d\n", value.intval);
+ }
+
+ return ret;
+}
+
+static ssize_t power_supply_store_property(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count) {
+ ssize_t ret;
+ struct power_supply *psy = dev_get_drvdata(dev);
+ struct power_supply_attr *ps_attr = to_ps_attr(attr);
+ enum power_supply_property psp = dev_attr_psp(attr);
+ union power_supply_propval value;
+
+ ret = -EINVAL;
+ if (ps_attr->text_values_len > 0) {
+ ret = __sysfs_match_string(ps_attr->text_values,
+ ps_attr->text_values_len, buf);
+ }
+
+ /*
+ * If no match was found, then check to see if it is an integer.
+ * Integer values are valid for enums in addition to the text value.
+ */
+ if (ret < 0) {
+ long long_val;
+
+ ret = kstrtol(buf, 10, &long_val);
+ if (ret < 0)
+ return ret;
+
+ ret = long_val;
+ }
+
+ value.intval = ret;
+
+ ret = power_supply_set_property(psy, psp, &value);
+ if (ret < 0)
+ return ret;
+
+ return count;
+}
+
+static umode_t power_supply_attr_is_visible(struct kobject *kobj,
+ struct attribute *attr,
+ int attrno)
+{
+ struct device *dev = kobj_to_dev(kobj);
+ struct power_supply *psy = dev_get_drvdata(dev);
+ umode_t mode = S_IRUSR | S_IRGRP | S_IROTH;
+ int i;
+
+ if (!power_supply_attrs[attrno].prop_name)
+ return 0;
+
+ if (attrno == POWER_SUPPLY_PROP_TYPE)
+ return mode;
+
+ for (i = 0; i < psy->desc->num_properties; i++) {
+ int property = psy->desc->properties[i];
+
+ if (property == attrno) {
+ if (psy->desc->property_is_writeable &&
+ psy->desc->property_is_writeable(psy, property) > 0)
+ mode |= S_IWUSR;
+
+ return mode;
+ }
+ }
+
+ return 0;
+}
+
+static struct attribute_group power_supply_attr_group = {
+ .attrs = __power_supply_attrs,
+ .is_visible = power_supply_attr_is_visible,
+};
+
+static const struct attribute_group *power_supply_attr_groups[] = {
+ &power_supply_attr_group,
+ NULL,
+};
+
+static void str_to_lower(char *str)
+{
+ while (*str) {
+ *str = tolower(*str);
+ str++;
+ }
+}
+
+void power_supply_init_attrs(struct device_type *dev_type)
+{
+ int i;
+
+ dev_type->groups = power_supply_attr_groups;
+
+ for (i = 0; i < ARRAY_SIZE(power_supply_attrs); i++) {
+ struct device_attribute *attr;
+
+ if (!power_supply_attrs[i].prop_name) {
+ pr_warn("%s: Property %d skipped because is is missing from power_supply_attrs\n",
+ __func__, i);
+ sprintf(power_supply_attrs[i].attr_name, "_err_%d", i);
+ } else {
+ str_to_lower(power_supply_attrs[i].attr_name);
+ }
+
+ attr = &power_supply_attrs[i].dev_attr;
+
+ attr->attr.name = power_supply_attrs[i].attr_name;
+ attr->show = power_supply_show_property;
+ attr->store = power_supply_store_property;
+ __power_supply_attrs[i] = &attr->attr;
+ }
+}
+
+static int add_prop_uevent(struct device *dev, struct kobj_uevent_env *env,
+ enum power_supply_property prop, char *prop_buf)
+{
+ int ret = 0;
+ struct power_supply_attr *pwr_attr;
+ struct device_attribute *dev_attr;
+ char *line;
+
+ pwr_attr = &power_supply_attrs[prop];
+ dev_attr = &pwr_attr->dev_attr;
+
+ ret = power_supply_show_property(dev, dev_attr, prop_buf);
+ if (ret == -ENODEV || ret == -ENODATA) {
+ /*
+ * When a battery is absent, we expect -ENODEV. Don't abort;
+ * send the uevent with at least the the PRESENT=0 property
+ */
+ return 0;
+ }
+
+ if (ret < 0)
+ return ret;
+
+ line = strchr(prop_buf, '\n');
+ if (line)
+ *line = 0;
+
+ return add_uevent_var(env, "POWER_SUPPLY_%s=%s",
+ pwr_attr->prop_name, prop_buf);
+}
+
+int power_supply_uevent(struct device *dev, struct kobj_uevent_env *env)
+{
+ struct power_supply *psy = dev_get_drvdata(dev);
+ int ret = 0, j;
+ char *prop_buf;
+
+ if (!psy || !psy->desc) {
+ dev_dbg(dev, "No power supply yet\n");
+ return ret;
+ }
+
+ ret = add_uevent_var(env, "POWER_SUPPLY_NAME=%s", psy->desc->name);
+ if (ret)
+ return ret;
+
+ prop_buf = (char *)get_zeroed_page(GFP_KERNEL);
+ if (!prop_buf)
+ return -ENOMEM;
+
+ ret = add_prop_uevent(dev, env, POWER_SUPPLY_PROP_TYPE, prop_buf);
+ if (ret)
+ goto out;
+
+ for (j = 0; j < psy->desc->num_properties; j++) {
+ ret = add_prop_uevent(dev, env, psy->desc->properties[j],
+ prop_buf);
+ if (ret)
+ goto out;
+ }
+
+out:
+ free_page((unsigned long)prop_buf);
+
+ return ret;
+}
diff --git a/drivers/power/supply/qcom_smbb.c b/drivers/power/supply/qcom_smbb.c
new file mode 100644
index 000000000..c890e1cec
--- /dev/null
+++ b/drivers/power/supply/qcom_smbb.c
@@ -0,0 +1,1034 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/* Copyright (c) 2014, Sony Mobile Communications Inc.
+ *
+ * This driver is for the multi-block Switch-Mode Battery Charger and Boost
+ * (SMBB) hardware, found in Qualcomm PM8941 PMICs. The charger is an
+ * integrated, single-cell lithium-ion battery charger.
+ *
+ * Sub-components:
+ * - Charger core
+ * - Buck
+ * - DC charge-path
+ * - USB charge-path
+ * - Battery interface
+ * - Boost (not implemented)
+ * - Misc
+ * - HF-Buck
+ */
+
+#include <linux/errno.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/power_supply.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+#include <linux/extcon-provider.h>
+#include <linux/regulator/driver.h>
+
+#define SMBB_CHG_VMAX 0x040
+#define SMBB_CHG_VSAFE 0x041
+#define SMBB_CHG_CFG 0x043
+#define SMBB_CHG_IMAX 0x044
+#define SMBB_CHG_ISAFE 0x045
+#define SMBB_CHG_VIN_MIN 0x047
+#define SMBB_CHG_CTRL 0x049
+#define CTRL_EN BIT(7)
+#define SMBB_CHG_VBAT_WEAK 0x052
+#define SMBB_CHG_IBAT_TERM_CHG 0x05b
+#define IBAT_TERM_CHG_IEOC BIT(7)
+#define IBAT_TERM_CHG_IEOC_BMS BIT(7)
+#define IBAT_TERM_CHG_IEOC_CHG 0
+#define SMBB_CHG_VBAT_DET 0x05d
+#define SMBB_CHG_TCHG_MAX_EN 0x060
+#define TCHG_MAX_EN BIT(7)
+#define SMBB_CHG_WDOG_TIME 0x062
+#define SMBB_CHG_WDOG_EN 0x065
+#define WDOG_EN BIT(7)
+
+#define SMBB_BUCK_REG_MODE 0x174
+#define BUCK_REG_MODE BIT(0)
+#define BUCK_REG_MODE_VBAT BIT(0)
+#define BUCK_REG_MODE_VSYS 0
+
+#define SMBB_BAT_PRES_STATUS 0x208
+#define PRES_STATUS_BAT_PRES BIT(7)
+#define SMBB_BAT_TEMP_STATUS 0x209
+#define TEMP_STATUS_OK BIT(7)
+#define TEMP_STATUS_HOT BIT(6)
+#define SMBB_BAT_BTC_CTRL 0x249
+#define BTC_CTRL_COMP_EN BIT(7)
+#define BTC_CTRL_COLD_EXT BIT(1)
+#define BTC_CTRL_HOT_EXT_N BIT(0)
+
+#define SMBB_USB_IMAX 0x344
+#define SMBB_USB_OTG_CTL 0x348
+#define OTG_CTL_EN BIT(0)
+#define SMBB_USB_ENUM_TIMER_STOP 0x34e
+#define ENUM_TIMER_STOP BIT(0)
+#define SMBB_USB_SEC_ACCESS 0x3d0
+#define SEC_ACCESS_MAGIC 0xa5
+#define SMBB_USB_REV_BST 0x3ed
+#define REV_BST_CHG_GONE BIT(7)
+
+#define SMBB_DC_IMAX 0x444
+
+#define SMBB_MISC_REV2 0x601
+#define SMBB_MISC_BOOT_DONE 0x642
+#define BOOT_DONE BIT(7)
+
+#define STATUS_USBIN_VALID BIT(0) /* USB connection is valid */
+#define STATUS_DCIN_VALID BIT(1) /* DC connection is valid */
+#define STATUS_BAT_HOT BIT(2) /* Battery temp 1=Hot, 0=Cold */
+#define STATUS_BAT_OK BIT(3) /* Battery temp OK */
+#define STATUS_BAT_PRESENT BIT(4) /* Battery is present */
+#define STATUS_CHG_DONE BIT(5) /* Charge cycle is complete */
+#define STATUS_CHG_TRKL BIT(6) /* Trickle charging */
+#define STATUS_CHG_FAST BIT(7) /* Fast charging */
+#define STATUS_CHG_GONE BIT(8) /* No charger is connected */
+
+enum smbb_attr {
+ ATTR_BAT_ISAFE,
+ ATTR_BAT_IMAX,
+ ATTR_USBIN_IMAX,
+ ATTR_DCIN_IMAX,
+ ATTR_BAT_VSAFE,
+ ATTR_BAT_VMAX,
+ ATTR_BAT_VMIN,
+ ATTR_CHG_VDET,
+ ATTR_VIN_MIN,
+ _ATTR_CNT,
+};
+
+struct smbb_charger {
+ unsigned int revision;
+ unsigned int addr;
+ struct device *dev;
+ struct extcon_dev *edev;
+
+ bool dc_disabled;
+ bool jeita_ext_temp;
+ unsigned long status;
+ struct mutex statlock;
+
+ unsigned int attr[_ATTR_CNT];
+
+ struct power_supply *usb_psy;
+ struct power_supply *dc_psy;
+ struct power_supply *bat_psy;
+ struct regmap *regmap;
+
+ struct regulator_desc otg_rdesc;
+ struct regulator_dev *otg_reg;
+};
+
+static const unsigned int smbb_usb_extcon_cable[] = {
+ EXTCON_USB,
+ EXTCON_NONE,
+};
+
+static int smbb_vbat_weak_fn(unsigned int index)
+{
+ return 2100000 + index * 100000;
+}
+
+static int smbb_vin_fn(unsigned int index)
+{
+ if (index > 42)
+ return 5600000 + (index - 43) * 200000;
+ return 3400000 + index * 50000;
+}
+
+static int smbb_vmax_fn(unsigned int index)
+{
+ return 3240000 + index * 10000;
+}
+
+static int smbb_vbat_det_fn(unsigned int index)
+{
+ return 3240000 + index * 20000;
+}
+
+static int smbb_imax_fn(unsigned int index)
+{
+ if (index < 2)
+ return 100000 + index * 50000;
+ return index * 100000;
+}
+
+static int smbb_bat_imax_fn(unsigned int index)
+{
+ return index * 50000;
+}
+
+static unsigned int smbb_hw_lookup(unsigned int val, int (*fn)(unsigned int))
+{
+ unsigned int widx;
+ unsigned int sel;
+
+ for (widx = sel = 0; (*fn)(widx) <= val; ++widx)
+ sel = widx;
+
+ return sel;
+}
+
+static const struct smbb_charger_attr {
+ const char *name;
+ unsigned int reg;
+ unsigned int safe_reg;
+ unsigned int max;
+ unsigned int min;
+ unsigned int fail_ok;
+ int (*hw_fn)(unsigned int);
+} smbb_charger_attrs[] = {
+ [ATTR_BAT_ISAFE] = {
+ .name = "qcom,fast-charge-safe-current",
+ .reg = SMBB_CHG_ISAFE,
+ .max = 3000000,
+ .min = 200000,
+ .hw_fn = smbb_bat_imax_fn,
+ .fail_ok = 1,
+ },
+ [ATTR_BAT_IMAX] = {
+ .name = "qcom,fast-charge-current-limit",
+ .reg = SMBB_CHG_IMAX,
+ .safe_reg = SMBB_CHG_ISAFE,
+ .max = 3000000,
+ .min = 200000,
+ .hw_fn = smbb_bat_imax_fn,
+ },
+ [ATTR_DCIN_IMAX] = {
+ .name = "qcom,dc-current-limit",
+ .reg = SMBB_DC_IMAX,
+ .max = 2500000,
+ .min = 100000,
+ .hw_fn = smbb_imax_fn,
+ },
+ [ATTR_BAT_VSAFE] = {
+ .name = "qcom,fast-charge-safe-voltage",
+ .reg = SMBB_CHG_VSAFE,
+ .max = 5000000,
+ .min = 3240000,
+ .hw_fn = smbb_vmax_fn,
+ .fail_ok = 1,
+ },
+ [ATTR_BAT_VMAX] = {
+ .name = "qcom,fast-charge-high-threshold-voltage",
+ .reg = SMBB_CHG_VMAX,
+ .safe_reg = SMBB_CHG_VSAFE,
+ .max = 5000000,
+ .min = 3240000,
+ .hw_fn = smbb_vmax_fn,
+ },
+ [ATTR_BAT_VMIN] = {
+ .name = "qcom,fast-charge-low-threshold-voltage",
+ .reg = SMBB_CHG_VBAT_WEAK,
+ .max = 3600000,
+ .min = 2100000,
+ .hw_fn = smbb_vbat_weak_fn,
+ },
+ [ATTR_CHG_VDET] = {
+ .name = "qcom,auto-recharge-threshold-voltage",
+ .reg = SMBB_CHG_VBAT_DET,
+ .max = 5000000,
+ .min = 3240000,
+ .hw_fn = smbb_vbat_det_fn,
+ },
+ [ATTR_VIN_MIN] = {
+ .name = "qcom,minimum-input-voltage",
+ .reg = SMBB_CHG_VIN_MIN,
+ .max = 9600000,
+ .min = 4200000,
+ .hw_fn = smbb_vin_fn,
+ },
+ [ATTR_USBIN_IMAX] = {
+ .name = "usb-charge-current-limit",
+ .reg = SMBB_USB_IMAX,
+ .max = 2500000,
+ .min = 100000,
+ .hw_fn = smbb_imax_fn,
+ },
+};
+
+static int smbb_charger_attr_write(struct smbb_charger *chg,
+ enum smbb_attr which, unsigned int val)
+{
+ const struct smbb_charger_attr *prop;
+ unsigned int wval;
+ unsigned int out;
+ int rc;
+
+ prop = &smbb_charger_attrs[which];
+
+ if (val > prop->max || val < prop->min) {
+ dev_err(chg->dev, "value out of range for %s [%u:%u]\n",
+ prop->name, prop->min, prop->max);
+ return -EINVAL;
+ }
+
+ if (prop->safe_reg) {
+ rc = regmap_read(chg->regmap,
+ chg->addr + prop->safe_reg, &wval);
+ if (rc) {
+ dev_err(chg->dev,
+ "unable to read safe value for '%s'\n",
+ prop->name);
+ return rc;
+ }
+
+ wval = prop->hw_fn(wval);
+
+ if (val > wval) {
+ dev_warn(chg->dev,
+ "%s above safe value, clamping at %u\n",
+ prop->name, wval);
+ val = wval;
+ }
+ }
+
+ wval = smbb_hw_lookup(val, prop->hw_fn);
+
+ rc = regmap_write(chg->regmap, chg->addr + prop->reg, wval);
+ if (rc) {
+ dev_err(chg->dev, "unable to update %s", prop->name);
+ return rc;
+ }
+ out = prop->hw_fn(wval);
+ if (out != val) {
+ dev_warn(chg->dev,
+ "%s inaccurate, rounded to %u\n",
+ prop->name, out);
+ }
+
+ dev_dbg(chg->dev, "%s <= %d\n", prop->name, out);
+
+ chg->attr[which] = out;
+
+ return 0;
+}
+
+static int smbb_charger_attr_read(struct smbb_charger *chg,
+ enum smbb_attr which)
+{
+ const struct smbb_charger_attr *prop;
+ unsigned int val;
+ int rc;
+
+ prop = &smbb_charger_attrs[which];
+
+ rc = regmap_read(chg->regmap, chg->addr + prop->reg, &val);
+ if (rc) {
+ dev_err(chg->dev, "failed to read %s\n", prop->name);
+ return rc;
+ }
+ val = prop->hw_fn(val);
+ dev_dbg(chg->dev, "%s => %d\n", prop->name, val);
+
+ chg->attr[which] = val;
+
+ return 0;
+}
+
+static int smbb_charger_attr_parse(struct smbb_charger *chg,
+ enum smbb_attr which)
+{
+ const struct smbb_charger_attr *prop;
+ unsigned int val;
+ int rc;
+
+ prop = &smbb_charger_attrs[which];
+
+ rc = of_property_read_u32(chg->dev->of_node, prop->name, &val);
+ if (rc == 0) {
+ rc = smbb_charger_attr_write(chg, which, val);
+ if (!rc || !prop->fail_ok)
+ return rc;
+ }
+ return smbb_charger_attr_read(chg, which);
+}
+
+static void smbb_set_line_flag(struct smbb_charger *chg, int irq, int flag)
+{
+ bool state;
+ int ret;
+
+ ret = irq_get_irqchip_state(irq, IRQCHIP_STATE_LINE_LEVEL, &state);
+ if (ret < 0) {
+ dev_err(chg->dev, "failed to read irq line\n");
+ return;
+ }
+
+ mutex_lock(&chg->statlock);
+ if (state)
+ chg->status |= flag;
+ else
+ chg->status &= ~flag;
+ mutex_unlock(&chg->statlock);
+
+ dev_dbg(chg->dev, "status = %03lx\n", chg->status);
+}
+
+static irqreturn_t smbb_usb_valid_handler(int irq, void *_data)
+{
+ struct smbb_charger *chg = _data;
+
+ smbb_set_line_flag(chg, irq, STATUS_USBIN_VALID);
+ extcon_set_state_sync(chg->edev, EXTCON_USB,
+ chg->status & STATUS_USBIN_VALID);
+ power_supply_changed(chg->usb_psy);
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t smbb_dc_valid_handler(int irq, void *_data)
+{
+ struct smbb_charger *chg = _data;
+
+ smbb_set_line_flag(chg, irq, STATUS_DCIN_VALID);
+ if (!chg->dc_disabled)
+ power_supply_changed(chg->dc_psy);
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t smbb_bat_temp_handler(int irq, void *_data)
+{
+ struct smbb_charger *chg = _data;
+ unsigned int val;
+ int rc;
+
+ rc = regmap_read(chg->regmap, chg->addr + SMBB_BAT_TEMP_STATUS, &val);
+ if (rc)
+ return IRQ_HANDLED;
+
+ mutex_lock(&chg->statlock);
+ if (val & TEMP_STATUS_OK) {
+ chg->status |= STATUS_BAT_OK;
+ } else {
+ chg->status &= ~STATUS_BAT_OK;
+ if (val & TEMP_STATUS_HOT)
+ chg->status |= STATUS_BAT_HOT;
+ }
+ mutex_unlock(&chg->statlock);
+
+ power_supply_changed(chg->bat_psy);
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t smbb_bat_present_handler(int irq, void *_data)
+{
+ struct smbb_charger *chg = _data;
+
+ smbb_set_line_flag(chg, irq, STATUS_BAT_PRESENT);
+ power_supply_changed(chg->bat_psy);
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t smbb_chg_done_handler(int irq, void *_data)
+{
+ struct smbb_charger *chg = _data;
+
+ smbb_set_line_flag(chg, irq, STATUS_CHG_DONE);
+ power_supply_changed(chg->bat_psy);
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t smbb_chg_gone_handler(int irq, void *_data)
+{
+ struct smbb_charger *chg = _data;
+
+ smbb_set_line_flag(chg, irq, STATUS_CHG_GONE);
+ power_supply_changed(chg->bat_psy);
+ power_supply_changed(chg->usb_psy);
+ if (!chg->dc_disabled)
+ power_supply_changed(chg->dc_psy);
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t smbb_chg_fast_handler(int irq, void *_data)
+{
+ struct smbb_charger *chg = _data;
+
+ smbb_set_line_flag(chg, irq, STATUS_CHG_FAST);
+ power_supply_changed(chg->bat_psy);
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t smbb_chg_trkl_handler(int irq, void *_data)
+{
+ struct smbb_charger *chg = _data;
+
+ smbb_set_line_flag(chg, irq, STATUS_CHG_TRKL);
+ power_supply_changed(chg->bat_psy);
+
+ return IRQ_HANDLED;
+}
+
+static const struct smbb_irq {
+ const char *name;
+ irqreturn_t (*handler)(int, void *);
+} smbb_charger_irqs[] = {
+ { "chg-done", smbb_chg_done_handler },
+ { "chg-fast", smbb_chg_fast_handler },
+ { "chg-trkl", smbb_chg_trkl_handler },
+ { "bat-temp-ok", smbb_bat_temp_handler },
+ { "bat-present", smbb_bat_present_handler },
+ { "chg-gone", smbb_chg_gone_handler },
+ { "usb-valid", smbb_usb_valid_handler },
+ { "dc-valid", smbb_dc_valid_handler },
+};
+
+static int smbb_usbin_get_property(struct power_supply *psy,
+ enum power_supply_property psp,
+ union power_supply_propval *val)
+{
+ struct smbb_charger *chg = power_supply_get_drvdata(psy);
+ int rc = 0;
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_ONLINE:
+ mutex_lock(&chg->statlock);
+ val->intval = !(chg->status & STATUS_CHG_GONE) &&
+ (chg->status & STATUS_USBIN_VALID);
+ mutex_unlock(&chg->statlock);
+ break;
+ case POWER_SUPPLY_PROP_CHARGE_CONTROL_LIMIT:
+ val->intval = chg->attr[ATTR_USBIN_IMAX];
+ break;
+ case POWER_SUPPLY_PROP_CHARGE_CONTROL_LIMIT_MAX:
+ val->intval = 2500000;
+ break;
+ default:
+ rc = -EINVAL;
+ break;
+ }
+
+ return rc;
+}
+
+static int smbb_usbin_set_property(struct power_supply *psy,
+ enum power_supply_property psp,
+ const union power_supply_propval *val)
+{
+ struct smbb_charger *chg = power_supply_get_drvdata(psy);
+ int rc;
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_CHARGE_CONTROL_LIMIT:
+ rc = smbb_charger_attr_write(chg, ATTR_USBIN_IMAX,
+ val->intval);
+ break;
+ default:
+ rc = -EINVAL;
+ break;
+ }
+
+ return rc;
+}
+
+static int smbb_dcin_get_property(struct power_supply *psy,
+ enum power_supply_property psp,
+ union power_supply_propval *val)
+{
+ struct smbb_charger *chg = power_supply_get_drvdata(psy);
+ int rc = 0;
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_ONLINE:
+ mutex_lock(&chg->statlock);
+ val->intval = !(chg->status & STATUS_CHG_GONE) &&
+ (chg->status & STATUS_DCIN_VALID);
+ mutex_unlock(&chg->statlock);
+ break;
+ case POWER_SUPPLY_PROP_CHARGE_CONTROL_LIMIT:
+ val->intval = chg->attr[ATTR_DCIN_IMAX];
+ break;
+ case POWER_SUPPLY_PROP_CHARGE_CONTROL_LIMIT_MAX:
+ val->intval = 2500000;
+ break;
+ default:
+ rc = -EINVAL;
+ break;
+ }
+
+ return rc;
+}
+
+static int smbb_dcin_set_property(struct power_supply *psy,
+ enum power_supply_property psp,
+ const union power_supply_propval *val)
+{
+ struct smbb_charger *chg = power_supply_get_drvdata(psy);
+ int rc;
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_CHARGE_CONTROL_LIMIT:
+ rc = smbb_charger_attr_write(chg, ATTR_DCIN_IMAX,
+ val->intval);
+ break;
+ default:
+ rc = -EINVAL;
+ break;
+ }
+
+ return rc;
+}
+
+static int smbb_charger_writable_property(struct power_supply *psy,
+ enum power_supply_property psp)
+{
+ return psp == POWER_SUPPLY_PROP_CHARGE_CONTROL_LIMIT;
+}
+
+static int smbb_battery_get_property(struct power_supply *psy,
+ enum power_supply_property psp,
+ union power_supply_propval *val)
+{
+ struct smbb_charger *chg = power_supply_get_drvdata(psy);
+ unsigned long status;
+ int rc = 0;
+
+ mutex_lock(&chg->statlock);
+ status = chg->status;
+ mutex_unlock(&chg->statlock);
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_STATUS:
+ if (status & STATUS_CHG_GONE)
+ val->intval = POWER_SUPPLY_STATUS_DISCHARGING;
+ else if (!(status & (STATUS_DCIN_VALID | STATUS_USBIN_VALID)))
+ val->intval = POWER_SUPPLY_STATUS_DISCHARGING;
+ else if (status & STATUS_CHG_DONE)
+ val->intval = POWER_SUPPLY_STATUS_FULL;
+ else if (!(status & STATUS_BAT_OK))
+ val->intval = POWER_SUPPLY_STATUS_DISCHARGING;
+ else if (status & (STATUS_CHG_FAST | STATUS_CHG_TRKL))
+ val->intval = POWER_SUPPLY_STATUS_CHARGING;
+ else /* everything is ok for charging, but we are not... */
+ val->intval = POWER_SUPPLY_STATUS_DISCHARGING;
+ break;
+ case POWER_SUPPLY_PROP_HEALTH:
+ if (status & STATUS_BAT_OK)
+ val->intval = POWER_SUPPLY_HEALTH_GOOD;
+ else if (status & STATUS_BAT_HOT)
+ val->intval = POWER_SUPPLY_HEALTH_OVERHEAT;
+ else
+ val->intval = POWER_SUPPLY_HEALTH_COLD;
+ break;
+ case POWER_SUPPLY_PROP_CHARGE_TYPE:
+ if (status & STATUS_CHG_FAST)
+ val->intval = POWER_SUPPLY_CHARGE_TYPE_FAST;
+ else if (status & STATUS_CHG_TRKL)
+ val->intval = POWER_SUPPLY_CHARGE_TYPE_TRICKLE;
+ else
+ val->intval = POWER_SUPPLY_CHARGE_TYPE_NONE;
+ break;
+ case POWER_SUPPLY_PROP_PRESENT:
+ val->intval = !!(status & STATUS_BAT_PRESENT);
+ break;
+ case POWER_SUPPLY_PROP_CURRENT_MAX:
+ val->intval = chg->attr[ATTR_BAT_IMAX];
+ break;
+ case POWER_SUPPLY_PROP_VOLTAGE_MAX:
+ val->intval = chg->attr[ATTR_BAT_VMAX];
+ break;
+ case POWER_SUPPLY_PROP_TECHNOLOGY:
+ /* this charger is a single-cell lithium-ion battery charger
+ * only. If you hook up some other technology, there will be
+ * fireworks.
+ */
+ val->intval = POWER_SUPPLY_TECHNOLOGY_LION;
+ break;
+ case POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN:
+ val->intval = 3000000; /* single-cell li-ion low end */
+ break;
+ default:
+ rc = -EINVAL;
+ break;
+ }
+
+ return rc;
+}
+
+static int smbb_battery_set_property(struct power_supply *psy,
+ enum power_supply_property psp,
+ const union power_supply_propval *val)
+{
+ struct smbb_charger *chg = power_supply_get_drvdata(psy);
+ int rc;
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_CURRENT_MAX:
+ rc = smbb_charger_attr_write(chg, ATTR_BAT_IMAX, val->intval);
+ break;
+ case POWER_SUPPLY_PROP_VOLTAGE_MAX:
+ rc = smbb_charger_attr_write(chg, ATTR_BAT_VMAX, val->intval);
+ break;
+ default:
+ rc = -EINVAL;
+ break;
+ }
+
+ return rc;
+}
+
+static int smbb_battery_writable_property(struct power_supply *psy,
+ enum power_supply_property psp)
+{
+ switch (psp) {
+ case POWER_SUPPLY_PROP_CURRENT_MAX:
+ case POWER_SUPPLY_PROP_VOLTAGE_MAX:
+ return 1;
+ default:
+ return 0;
+ }
+}
+
+static enum power_supply_property smbb_charger_properties[] = {
+ POWER_SUPPLY_PROP_ONLINE,
+ POWER_SUPPLY_PROP_CHARGE_CONTROL_LIMIT,
+ POWER_SUPPLY_PROP_CHARGE_CONTROL_LIMIT_MAX,
+};
+
+static enum power_supply_property smbb_battery_properties[] = {
+ POWER_SUPPLY_PROP_STATUS,
+ POWER_SUPPLY_PROP_HEALTH,
+ POWER_SUPPLY_PROP_PRESENT,
+ POWER_SUPPLY_PROP_CHARGE_TYPE,
+ POWER_SUPPLY_PROP_CURRENT_MAX,
+ POWER_SUPPLY_PROP_VOLTAGE_MAX,
+ POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN,
+ POWER_SUPPLY_PROP_TECHNOLOGY,
+};
+
+static const struct reg_off_mask_default {
+ unsigned int offset;
+ unsigned int mask;
+ unsigned int value;
+ unsigned int rev_mask;
+} smbb_charger_setup[] = {
+ /* The bootloader is supposed to set this... make sure anyway. */
+ { SMBB_MISC_BOOT_DONE, BOOT_DONE, BOOT_DONE },
+
+ /* Disable software timer */
+ { SMBB_CHG_TCHG_MAX_EN, TCHG_MAX_EN, 0 },
+
+ /* Clear and disable watchdog */
+ { SMBB_CHG_WDOG_TIME, 0xff, 160 },
+ { SMBB_CHG_WDOG_EN, WDOG_EN, 0 },
+
+ /* Use charger based EoC detection */
+ { SMBB_CHG_IBAT_TERM_CHG, IBAT_TERM_CHG_IEOC, IBAT_TERM_CHG_IEOC_CHG },
+
+ /* Disable GSM PA load adjustment.
+ * The PA signal is incorrectly connected on v2.
+ */
+ { SMBB_CHG_CFG, 0xff, 0x00, BIT(3) },
+
+ /* Use VBAT (not VSYS) to compensate for IR drop during fast charging */
+ { SMBB_BUCK_REG_MODE, BUCK_REG_MODE, BUCK_REG_MODE_VBAT },
+
+ /* Enable battery temperature comparators */
+ { SMBB_BAT_BTC_CTRL, BTC_CTRL_COMP_EN, BTC_CTRL_COMP_EN },
+
+ /* Stop USB enumeration timer */
+ { SMBB_USB_ENUM_TIMER_STOP, ENUM_TIMER_STOP, ENUM_TIMER_STOP },
+
+#if 0 /* FIXME supposedly only to disable hardware ARB termination */
+ { SMBB_USB_SEC_ACCESS, SEC_ACCESS_MAGIC },
+ { SMBB_USB_REV_BST, 0xff, REV_BST_CHG_GONE },
+#endif
+
+ /* Stop USB enumeration timer, again */
+ { SMBB_USB_ENUM_TIMER_STOP, ENUM_TIMER_STOP, ENUM_TIMER_STOP },
+
+ /* Enable charging */
+ { SMBB_CHG_CTRL, CTRL_EN, CTRL_EN },
+};
+
+static char *smbb_bif[] = { "smbb-bif" };
+
+static const struct power_supply_desc bat_psy_desc = {
+ .name = "smbb-bif",
+ .type = POWER_SUPPLY_TYPE_BATTERY,
+ .properties = smbb_battery_properties,
+ .num_properties = ARRAY_SIZE(smbb_battery_properties),
+ .get_property = smbb_battery_get_property,
+ .set_property = smbb_battery_set_property,
+ .property_is_writeable = smbb_battery_writable_property,
+};
+
+static const struct power_supply_desc usb_psy_desc = {
+ .name = "smbb-usbin",
+ .type = POWER_SUPPLY_TYPE_USB,
+ .properties = smbb_charger_properties,
+ .num_properties = ARRAY_SIZE(smbb_charger_properties),
+ .get_property = smbb_usbin_get_property,
+ .set_property = smbb_usbin_set_property,
+ .property_is_writeable = smbb_charger_writable_property,
+};
+
+static const struct power_supply_desc dc_psy_desc = {
+ .name = "smbb-dcin",
+ .type = POWER_SUPPLY_TYPE_MAINS,
+ .properties = smbb_charger_properties,
+ .num_properties = ARRAY_SIZE(smbb_charger_properties),
+ .get_property = smbb_dcin_get_property,
+ .set_property = smbb_dcin_set_property,
+ .property_is_writeable = smbb_charger_writable_property,
+};
+
+static int smbb_chg_otg_enable(struct regulator_dev *rdev)
+{
+ struct smbb_charger *chg = rdev_get_drvdata(rdev);
+ int rc;
+
+ rc = regmap_update_bits(chg->regmap, chg->addr + SMBB_USB_OTG_CTL,
+ OTG_CTL_EN, OTG_CTL_EN);
+ if (rc)
+ dev_err(chg->dev, "failed to update OTG_CTL\n");
+ return rc;
+}
+
+static int smbb_chg_otg_disable(struct regulator_dev *rdev)
+{
+ struct smbb_charger *chg = rdev_get_drvdata(rdev);
+ int rc;
+
+ rc = regmap_update_bits(chg->regmap, chg->addr + SMBB_USB_OTG_CTL,
+ OTG_CTL_EN, 0);
+ if (rc)
+ dev_err(chg->dev, "failed to update OTG_CTL\n");
+ return rc;
+}
+
+static int smbb_chg_otg_is_enabled(struct regulator_dev *rdev)
+{
+ struct smbb_charger *chg = rdev_get_drvdata(rdev);
+ unsigned int value = 0;
+ int rc;
+
+ rc = regmap_read(chg->regmap, chg->addr + SMBB_USB_OTG_CTL, &value);
+ if (rc)
+ dev_err(chg->dev, "failed to read OTG_CTL\n");
+
+ return !!(value & OTG_CTL_EN);
+}
+
+static const struct regulator_ops smbb_chg_otg_ops = {
+ .enable = smbb_chg_otg_enable,
+ .disable = smbb_chg_otg_disable,
+ .is_enabled = smbb_chg_otg_is_enabled,
+};
+
+static int smbb_charger_probe(struct platform_device *pdev)
+{
+ struct power_supply_config bat_cfg = {};
+ struct power_supply_config usb_cfg = {};
+ struct power_supply_config dc_cfg = {};
+ struct smbb_charger *chg;
+ struct regulator_config config = { };
+ int rc, i;
+
+ chg = devm_kzalloc(&pdev->dev, sizeof(*chg), GFP_KERNEL);
+ if (!chg)
+ return -ENOMEM;
+
+ chg->dev = &pdev->dev;
+ mutex_init(&chg->statlock);
+
+ chg->regmap = dev_get_regmap(pdev->dev.parent, NULL);
+ if (!chg->regmap) {
+ dev_err(&pdev->dev, "failed to locate regmap\n");
+ return -ENODEV;
+ }
+
+ rc = of_property_read_u32(pdev->dev.of_node, "reg", &chg->addr);
+ if (rc) {
+ dev_err(&pdev->dev, "missing or invalid 'reg' property\n");
+ return rc;
+ }
+
+ rc = regmap_read(chg->regmap, chg->addr + SMBB_MISC_REV2, &chg->revision);
+ if (rc) {
+ dev_err(&pdev->dev, "unable to read revision\n");
+ return rc;
+ }
+
+ chg->revision += 1;
+ if (chg->revision != 2 && chg->revision != 3) {
+ dev_err(&pdev->dev, "v1 hardware not supported\n");
+ return -ENODEV;
+ }
+ dev_info(&pdev->dev, "Initializing SMBB rev %u", chg->revision);
+
+ chg->dc_disabled = of_property_read_bool(pdev->dev.of_node, "qcom,disable-dc");
+
+ for (i = 0; i < _ATTR_CNT; ++i) {
+ rc = smbb_charger_attr_parse(chg, i);
+ if (rc) {
+ dev_err(&pdev->dev, "failed to parse/apply settings\n");
+ return rc;
+ }
+ }
+
+ bat_cfg.drv_data = chg;
+ bat_cfg.of_node = pdev->dev.of_node;
+ chg->bat_psy = devm_power_supply_register(&pdev->dev,
+ &bat_psy_desc,
+ &bat_cfg);
+ if (IS_ERR(chg->bat_psy)) {
+ dev_err(&pdev->dev, "failed to register battery\n");
+ return PTR_ERR(chg->bat_psy);
+ }
+
+ usb_cfg.drv_data = chg;
+ usb_cfg.supplied_to = smbb_bif;
+ usb_cfg.num_supplicants = ARRAY_SIZE(smbb_bif);
+ chg->usb_psy = devm_power_supply_register(&pdev->dev,
+ &usb_psy_desc,
+ &usb_cfg);
+ if (IS_ERR(chg->usb_psy)) {
+ dev_err(&pdev->dev, "failed to register USB power supply\n");
+ return PTR_ERR(chg->usb_psy);
+ }
+
+ chg->edev = devm_extcon_dev_allocate(&pdev->dev, smbb_usb_extcon_cable);
+ if (IS_ERR(chg->edev)) {
+ dev_err(&pdev->dev, "failed to allocate extcon device\n");
+ return -ENOMEM;
+ }
+
+ rc = devm_extcon_dev_register(&pdev->dev, chg->edev);
+ if (rc < 0) {
+ dev_err(&pdev->dev, "failed to register extcon device\n");
+ return rc;
+ }
+
+ if (!chg->dc_disabled) {
+ dc_cfg.drv_data = chg;
+ dc_cfg.supplied_to = smbb_bif;
+ dc_cfg.num_supplicants = ARRAY_SIZE(smbb_bif);
+ chg->dc_psy = devm_power_supply_register(&pdev->dev,
+ &dc_psy_desc,
+ &dc_cfg);
+ if (IS_ERR(chg->dc_psy)) {
+ dev_err(&pdev->dev, "failed to register DC power supply\n");
+ return PTR_ERR(chg->dc_psy);
+ }
+ }
+
+ for (i = 0; i < ARRAY_SIZE(smbb_charger_irqs); ++i) {
+ int irq;
+
+ irq = platform_get_irq_byname(pdev, smbb_charger_irqs[i].name);
+ if (irq < 0) {
+ dev_err(&pdev->dev, "failed to get irq '%s'\n",
+ smbb_charger_irqs[i].name);
+ return irq;
+ }
+
+ smbb_charger_irqs[i].handler(irq, chg);
+
+ rc = devm_request_threaded_irq(&pdev->dev, irq, NULL,
+ smbb_charger_irqs[i].handler, IRQF_ONESHOT,
+ smbb_charger_irqs[i].name, chg);
+ if (rc) {
+ dev_err(&pdev->dev, "failed to request irq '%s'\n",
+ smbb_charger_irqs[i].name);
+ return rc;
+ }
+ }
+
+ /*
+ * otg regulator is used to control VBUS voltage direction
+ * when USB switches between host and gadget mode
+ */
+ chg->otg_rdesc.id = -1;
+ chg->otg_rdesc.name = "otg-vbus";
+ chg->otg_rdesc.ops = &smbb_chg_otg_ops;
+ chg->otg_rdesc.owner = THIS_MODULE;
+ chg->otg_rdesc.type = REGULATOR_VOLTAGE;
+ chg->otg_rdesc.supply_name = "usb-otg-in";
+ chg->otg_rdesc.of_match = "otg-vbus";
+
+ config.dev = &pdev->dev;
+ config.driver_data = chg;
+
+ chg->otg_reg = devm_regulator_register(&pdev->dev, &chg->otg_rdesc,
+ &config);
+ if (IS_ERR(chg->otg_reg))
+ return PTR_ERR(chg->otg_reg);
+
+ chg->jeita_ext_temp = of_property_read_bool(pdev->dev.of_node,
+ "qcom,jeita-extended-temp-range");
+
+ /* Set temperature range to [35%:70%] or [25%:80%] accordingly */
+ rc = regmap_update_bits(chg->regmap, chg->addr + SMBB_BAT_BTC_CTRL,
+ BTC_CTRL_COLD_EXT | BTC_CTRL_HOT_EXT_N,
+ chg->jeita_ext_temp ?
+ BTC_CTRL_COLD_EXT :
+ BTC_CTRL_HOT_EXT_N);
+ if (rc) {
+ dev_err(&pdev->dev,
+ "unable to set %s temperature range\n",
+ chg->jeita_ext_temp ? "JEITA extended" : "normal");
+ return rc;
+ }
+
+ for (i = 0; i < ARRAY_SIZE(smbb_charger_setup); ++i) {
+ const struct reg_off_mask_default *r = &smbb_charger_setup[i];
+
+ if (r->rev_mask & BIT(chg->revision))
+ continue;
+
+ rc = regmap_update_bits(chg->regmap, chg->addr + r->offset,
+ r->mask, r->value);
+ if (rc) {
+ dev_err(&pdev->dev,
+ "unable to initializing charging, bailing\n");
+ return rc;
+ }
+ }
+
+ platform_set_drvdata(pdev, chg);
+
+ return 0;
+}
+
+static int smbb_charger_remove(struct platform_device *pdev)
+{
+ struct smbb_charger *chg;
+
+ chg = platform_get_drvdata(pdev);
+
+ regmap_update_bits(chg->regmap, chg->addr + SMBB_CHG_CTRL, CTRL_EN, 0);
+
+ return 0;
+}
+
+static const struct of_device_id smbb_charger_id_table[] = {
+ { .compatible = "qcom,pm8941-charger" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, smbb_charger_id_table);
+
+static struct platform_driver smbb_charger_driver = {
+ .probe = smbb_charger_probe,
+ .remove = smbb_charger_remove,
+ .driver = {
+ .name = "qcom-smbb",
+ .of_match_table = smbb_charger_id_table,
+ },
+};
+module_platform_driver(smbb_charger_driver);
+
+MODULE_DESCRIPTION("Qualcomm Switch-Mode Battery Charger and Boost driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/power/supply/rn5t618_power.c b/drivers/power/supply/rn5t618_power.c
new file mode 100644
index 000000000..dee520f0f
--- /dev/null
+++ b/drivers/power/supply/rn5t618_power.c
@@ -0,0 +1,556 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Power supply driver for the RICOH RN5T618 power management chip family
+ *
+ * Copyright (C) 2020 Andreas Kemnade
+ */
+
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/bitops.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/mfd/rn5t618.h>
+#include <linux/platform_device.h>
+#include <linux/power_supply.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+
+#define CHG_STATE_ADP_INPUT 0x40
+#define CHG_STATE_USB_INPUT 0x80
+#define CHG_STATE_MASK 0x1f
+#define CHG_STATE_CHG_OFF 0
+#define CHG_STATE_CHG_READY_VADP 1
+#define CHG_STATE_CHG_TRICKLE 2
+#define CHG_STATE_CHG_RAPID 3
+#define CHG_STATE_CHG_COMPLETE 4
+#define CHG_STATE_SUSPEND 5
+#define CHG_STATE_VCHG_OVER_VOL 6
+#define CHG_STATE_BAT_ERROR 7
+#define CHG_STATE_NO_BAT 8
+#define CHG_STATE_BAT_OVER_VOL 9
+#define CHG_STATE_BAT_TEMP_ERR 10
+#define CHG_STATE_DIE_ERR 11
+#define CHG_STATE_DIE_SHUTDOWN 12
+#define CHG_STATE_NO_BAT2 13
+#define CHG_STATE_CHG_READY_VUSB 14
+
+#define FG_ENABLE 1
+
+struct rn5t618_power_info {
+ struct rn5t618 *rn5t618;
+ struct platform_device *pdev;
+ struct power_supply *battery;
+ struct power_supply *usb;
+ struct power_supply *adp;
+ int irq;
+};
+
+static enum power_supply_property rn5t618_usb_props[] = {
+ POWER_SUPPLY_PROP_STATUS,
+ POWER_SUPPLY_PROP_ONLINE,
+};
+
+static enum power_supply_property rn5t618_adp_props[] = {
+ POWER_SUPPLY_PROP_STATUS,
+ POWER_SUPPLY_PROP_ONLINE,
+};
+
+
+static enum power_supply_property rn5t618_battery_props[] = {
+ POWER_SUPPLY_PROP_STATUS,
+ POWER_SUPPLY_PROP_PRESENT,
+ POWER_SUPPLY_PROP_VOLTAGE_NOW,
+ POWER_SUPPLY_PROP_CURRENT_NOW,
+ POWER_SUPPLY_PROP_CAPACITY,
+ POWER_SUPPLY_PROP_TEMP,
+ POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW,
+ POWER_SUPPLY_PROP_TIME_TO_FULL_NOW,
+ POWER_SUPPLY_PROP_TECHNOLOGY,
+ POWER_SUPPLY_PROP_CHARGE_FULL,
+ POWER_SUPPLY_PROP_CHARGE_NOW,
+};
+
+static int rn5t618_battery_read_doublereg(struct rn5t618_power_info *info,
+ u8 reg, u16 *result)
+{
+ int ret, i;
+ u8 data[2];
+ u16 old, new;
+
+ old = 0;
+ /* Prevent races when registers are changing. */
+ for (i = 0; i < 3; i++) {
+ ret = regmap_bulk_read(info->rn5t618->regmap,
+ reg, data, sizeof(data));
+ if (ret)
+ return ret;
+
+ new = data[0] << 8;
+ new |= data[1];
+ if (new == old)
+ break;
+
+ old = new;
+ }
+
+ *result = new;
+
+ return 0;
+}
+
+static int rn5t618_decode_status(unsigned int status)
+{
+ switch (status & CHG_STATE_MASK) {
+ case CHG_STATE_CHG_OFF:
+ case CHG_STATE_SUSPEND:
+ case CHG_STATE_VCHG_OVER_VOL:
+ case CHG_STATE_DIE_SHUTDOWN:
+ return POWER_SUPPLY_STATUS_DISCHARGING;
+
+ case CHG_STATE_CHG_TRICKLE:
+ case CHG_STATE_CHG_RAPID:
+ return POWER_SUPPLY_STATUS_CHARGING;
+
+ case CHG_STATE_CHG_COMPLETE:
+ return POWER_SUPPLY_STATUS_FULL;
+
+ default:
+ return POWER_SUPPLY_STATUS_NOT_CHARGING;
+ }
+}
+
+static int rn5t618_battery_status(struct rn5t618_power_info *info,
+ union power_supply_propval *val)
+{
+ unsigned int v;
+ int ret;
+
+ ret = regmap_read(info->rn5t618->regmap, RN5T618_CHGSTATE, &v);
+ if (ret)
+ return ret;
+
+ val->intval = POWER_SUPPLY_STATUS_UNKNOWN;
+
+ if (v & 0xc0) { /* USB or ADP plugged */
+ val->intval = rn5t618_decode_status(v);
+ } else
+ val->intval = POWER_SUPPLY_STATUS_DISCHARGING;
+
+ return ret;
+}
+
+static int rn5t618_battery_present(struct rn5t618_power_info *info,
+ union power_supply_propval *val)
+{
+ unsigned int v;
+ int ret;
+
+ ret = regmap_read(info->rn5t618->regmap, RN5T618_CHGSTATE, &v);
+ if (ret)
+ return ret;
+
+ v &= CHG_STATE_MASK;
+ if ((v == CHG_STATE_NO_BAT) || (v == CHG_STATE_NO_BAT2))
+ val->intval = 0;
+ else
+ val->intval = 1;
+
+ return ret;
+}
+
+static int rn5t618_battery_voltage_now(struct rn5t618_power_info *info,
+ union power_supply_propval *val)
+{
+ u16 res;
+ int ret;
+
+ ret = rn5t618_battery_read_doublereg(info, RN5T618_VOLTAGE_1, &res);
+ if (ret)
+ return ret;
+
+ val->intval = res * 2 * 2500 / 4095 * 1000;
+
+ return 0;
+}
+
+static int rn5t618_battery_current_now(struct rn5t618_power_info *info,
+ union power_supply_propval *val)
+{
+ u16 res;
+ int ret;
+
+ ret = rn5t618_battery_read_doublereg(info, RN5T618_CC_AVEREG1, &res);
+ if (ret)
+ return ret;
+
+ /* current is negative when discharging */
+ val->intval = sign_extend32(res, 13) * 1000;
+
+ return 0;
+}
+
+static int rn5t618_battery_capacity(struct rn5t618_power_info *info,
+ union power_supply_propval *val)
+{
+ unsigned int v;
+ int ret;
+
+ ret = regmap_read(info->rn5t618->regmap, RN5T618_SOC, &v);
+ if (ret)
+ return ret;
+
+ val->intval = v;
+
+ return 0;
+}
+
+static int rn5t618_battery_temp(struct rn5t618_power_info *info,
+ union power_supply_propval *val)
+{
+ u16 res;
+ int ret;
+
+ ret = rn5t618_battery_read_doublereg(info, RN5T618_TEMP_1, &res);
+ if (ret)
+ return ret;
+
+ val->intval = sign_extend32(res, 11) * 10 / 16;
+
+ return 0;
+}
+
+static int rn5t618_battery_tte(struct rn5t618_power_info *info,
+ union power_supply_propval *val)
+{
+ u16 res;
+ int ret;
+
+ ret = rn5t618_battery_read_doublereg(info, RN5T618_TT_EMPTY_H, &res);
+ if (ret)
+ return ret;
+
+ if (res == 65535)
+ return -ENODATA;
+
+ val->intval = res * 60;
+
+ return 0;
+}
+
+static int rn5t618_battery_ttf(struct rn5t618_power_info *info,
+ union power_supply_propval *val)
+{
+ u16 res;
+ int ret;
+
+ ret = rn5t618_battery_read_doublereg(info, RN5T618_TT_FULL_H, &res);
+ if (ret)
+ return ret;
+
+ if (res == 65535)
+ return -ENODATA;
+
+ val->intval = res * 60;
+
+ return 0;
+}
+
+static int rn5t618_battery_charge_full(struct rn5t618_power_info *info,
+ union power_supply_propval *val)
+{
+ u16 res;
+ int ret;
+
+ ret = rn5t618_battery_read_doublereg(info, RN5T618_FA_CAP_H, &res);
+ if (ret)
+ return ret;
+
+ val->intval = res * 1000;
+
+ return 0;
+}
+
+static int rn5t618_battery_charge_now(struct rn5t618_power_info *info,
+ union power_supply_propval *val)
+{
+ u16 res;
+ int ret;
+
+ ret = rn5t618_battery_read_doublereg(info, RN5T618_RE_CAP_H, &res);
+ if (ret)
+ return ret;
+
+ val->intval = res * 1000;
+
+ return 0;
+}
+
+static int rn5t618_battery_get_property(struct power_supply *psy,
+ enum power_supply_property psp,
+ union power_supply_propval *val)
+{
+ int ret = 0;
+ struct rn5t618_power_info *info = power_supply_get_drvdata(psy);
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_STATUS:
+ ret = rn5t618_battery_status(info, val);
+ break;
+ case POWER_SUPPLY_PROP_PRESENT:
+ ret = rn5t618_battery_present(info, val);
+ break;
+ case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+ ret = rn5t618_battery_voltage_now(info, val);
+ break;
+ case POWER_SUPPLY_PROP_CURRENT_NOW:
+ ret = rn5t618_battery_current_now(info, val);
+ break;
+ case POWER_SUPPLY_PROP_CAPACITY:
+ ret = rn5t618_battery_capacity(info, val);
+ break;
+ case POWER_SUPPLY_PROP_TEMP:
+ ret = rn5t618_battery_temp(info, val);
+ break;
+ case POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW:
+ ret = rn5t618_battery_tte(info, val);
+ break;
+ case POWER_SUPPLY_PROP_TIME_TO_FULL_NOW:
+ ret = rn5t618_battery_ttf(info, val);
+ break;
+ case POWER_SUPPLY_PROP_TECHNOLOGY:
+ val->intval = POWER_SUPPLY_TECHNOLOGY_LION;
+ break;
+ case POWER_SUPPLY_PROP_CHARGE_FULL:
+ ret = rn5t618_battery_charge_full(info, val);
+ break;
+ case POWER_SUPPLY_PROP_CHARGE_NOW:
+ ret = rn5t618_battery_charge_now(info, val);
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return ret;
+}
+
+static int rn5t618_adp_get_property(struct power_supply *psy,
+ enum power_supply_property psp,
+ union power_supply_propval *val)
+{
+ struct rn5t618_power_info *info = power_supply_get_drvdata(psy);
+ unsigned int chgstate;
+ bool online;
+ int ret;
+
+ ret = regmap_read(info->rn5t618->regmap, RN5T618_CHGSTATE, &chgstate);
+ if (ret)
+ return ret;
+
+ online = !!(chgstate & CHG_STATE_ADP_INPUT);
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_ONLINE:
+ val->intval = online;
+ break;
+ case POWER_SUPPLY_PROP_STATUS:
+ if (!online) {
+ val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING;
+ break;
+ }
+ val->intval = rn5t618_decode_status(chgstate);
+ if (val->intval != POWER_SUPPLY_STATUS_CHARGING)
+ val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING;
+
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int rn5t618_usb_get_property(struct power_supply *psy,
+ enum power_supply_property psp,
+ union power_supply_propval *val)
+{
+ struct rn5t618_power_info *info = power_supply_get_drvdata(psy);
+ unsigned int chgstate;
+ bool online;
+ int ret;
+
+ ret = regmap_read(info->rn5t618->regmap, RN5T618_CHGSTATE, &chgstate);
+ if (ret)
+ return ret;
+
+ online = !!(chgstate & CHG_STATE_USB_INPUT);
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_ONLINE:
+ val->intval = online;
+ break;
+ case POWER_SUPPLY_PROP_STATUS:
+ if (!online) {
+ val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING;
+ break;
+ }
+ val->intval = rn5t618_decode_status(chgstate);
+ if (val->intval != POWER_SUPPLY_STATUS_CHARGING)
+ val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING;
+
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static const struct power_supply_desc rn5t618_battery_desc = {
+ .name = "rn5t618-battery",
+ .type = POWER_SUPPLY_TYPE_BATTERY,
+ .properties = rn5t618_battery_props,
+ .num_properties = ARRAY_SIZE(rn5t618_battery_props),
+ .get_property = rn5t618_battery_get_property,
+};
+
+static const struct power_supply_desc rn5t618_adp_desc = {
+ .name = "rn5t618-adp",
+ .type = POWER_SUPPLY_TYPE_MAINS,
+ .properties = rn5t618_adp_props,
+ .num_properties = ARRAY_SIZE(rn5t618_adp_props),
+ .get_property = rn5t618_adp_get_property,
+};
+
+static const struct power_supply_desc rn5t618_usb_desc = {
+ .name = "rn5t618-usb",
+ .type = POWER_SUPPLY_TYPE_USB,
+ .properties = rn5t618_usb_props,
+ .num_properties = ARRAY_SIZE(rn5t618_usb_props),
+ .get_property = rn5t618_usb_get_property,
+};
+
+static irqreturn_t rn5t618_charger_irq(int irq, void *data)
+{
+ struct device *dev = data;
+ struct rn5t618_power_info *info = dev_get_drvdata(dev);
+
+ unsigned int ctrl, stat1, stat2, err;
+
+ regmap_read(info->rn5t618->regmap, RN5T618_CHGERR_IRR, &err);
+ regmap_read(info->rn5t618->regmap, RN5T618_CHGCTRL_IRR, &ctrl);
+ regmap_read(info->rn5t618->regmap, RN5T618_CHGSTAT_IRR1, &stat1);
+ regmap_read(info->rn5t618->regmap, RN5T618_CHGSTAT_IRR2, &stat2);
+
+ regmap_write(info->rn5t618->regmap, RN5T618_CHGERR_IRR, 0);
+ regmap_write(info->rn5t618->regmap, RN5T618_CHGCTRL_IRR, 0);
+ regmap_write(info->rn5t618->regmap, RN5T618_CHGSTAT_IRR1, 0);
+ regmap_write(info->rn5t618->regmap, RN5T618_CHGSTAT_IRR2, 0);
+
+ dev_dbg(dev, "chgerr: %x chgctrl: %x chgstat: %x chgstat2: %x\n",
+ err, ctrl, stat1, stat2);
+
+ power_supply_changed(info->usb);
+ power_supply_changed(info->adp);
+ power_supply_changed(info->battery);
+
+ return IRQ_HANDLED;
+}
+
+static int rn5t618_power_probe(struct platform_device *pdev)
+{
+ int ret = 0;
+ unsigned int v;
+ struct power_supply_config psy_cfg = {};
+ struct rn5t618_power_info *info;
+
+ info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL);
+ if (!info)
+ return -ENOMEM;
+
+ info->pdev = pdev;
+ info->rn5t618 = dev_get_drvdata(pdev->dev.parent);
+ info->irq = -1;
+
+ platform_set_drvdata(pdev, info);
+
+ ret = regmap_read(info->rn5t618->regmap, RN5T618_CONTROL, &v);
+ if (ret)
+ return ret;
+
+ if (!(v & FG_ENABLE)) {
+ /* E.g. the vendor kernels of various Kobo and Tolino Ebook
+ * readers disable the fuel gauge on shutdown. If a kernel
+ * without fuel gauge support is booted after that, the fuel
+ * gauge will get decalibrated.
+ */
+ dev_info(&pdev->dev, "Fuel gauge not enabled, enabling now\n");
+ dev_info(&pdev->dev, "Expect imprecise results\n");
+ regmap_update_bits(info->rn5t618->regmap, RN5T618_CONTROL,
+ FG_ENABLE, FG_ENABLE);
+ }
+
+ psy_cfg.drv_data = info;
+ info->battery = devm_power_supply_register(&pdev->dev,
+ &rn5t618_battery_desc,
+ &psy_cfg);
+ if (IS_ERR(info->battery)) {
+ ret = PTR_ERR(info->battery);
+ dev_err(&pdev->dev, "failed to register battery: %d\n", ret);
+ return ret;
+ }
+
+ info->adp = devm_power_supply_register(&pdev->dev,
+ &rn5t618_adp_desc,
+ &psy_cfg);
+ if (IS_ERR(info->adp)) {
+ ret = PTR_ERR(info->adp);
+ dev_err(&pdev->dev, "failed to register adp: %d\n", ret);
+ return ret;
+ }
+
+ info->usb = devm_power_supply_register(&pdev->dev,
+ &rn5t618_usb_desc,
+ &psy_cfg);
+ if (IS_ERR(info->usb)) {
+ ret = PTR_ERR(info->usb);
+ dev_err(&pdev->dev, "failed to register usb: %d\n", ret);
+ return ret;
+ }
+
+ if (info->rn5t618->irq_data)
+ info->irq = regmap_irq_get_virq(info->rn5t618->irq_data,
+ RN5T618_IRQ_CHG);
+
+ if (info->irq < 0)
+ info->irq = -1;
+ else {
+ ret = devm_request_threaded_irq(&pdev->dev, info->irq, NULL,
+ rn5t618_charger_irq,
+ IRQF_ONESHOT,
+ "rn5t618_power",
+ &pdev->dev);
+
+ if (ret < 0) {
+ dev_err(&pdev->dev, "request IRQ:%d fail\n",
+ info->irq);
+ info->irq = -1;
+ }
+ }
+
+ return 0;
+}
+
+static struct platform_driver rn5t618_power_driver = {
+ .driver = {
+ .name = "rn5t618-power",
+ },
+ .probe = rn5t618_power_probe,
+};
+
+module_platform_driver(rn5t618_power_driver);
+MODULE_ALIAS("platform:rn5t618-power");
+MODULE_DESCRIPTION("Power supply driver for RICOH RN5T618");
+MODULE_LICENSE("GPL");
diff --git a/drivers/power/supply/rt5033_battery.c b/drivers/power/supply/rt5033_battery.c
new file mode 100644
index 000000000..7a23c70f4
--- /dev/null
+++ b/drivers/power/supply/rt5033_battery.c
@@ -0,0 +1,186 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Fuel gauge driver for Richtek RT5033
+ *
+ * Copyright (C) 2014 Samsung Electronics, Co., Ltd.
+ * Author: Beomho Seo <beomho.seo@samsung.com>
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/power_supply.h>
+#include <linux/mfd/rt5033-private.h>
+#include <linux/mfd/rt5033.h>
+
+static int rt5033_battery_get_capacity(struct i2c_client *client)
+{
+ struct rt5033_battery *battery = i2c_get_clientdata(client);
+ u32 msb;
+
+ regmap_read(battery->regmap, RT5033_FUEL_REG_SOC_H, &msb);
+
+ return msb;
+}
+
+static int rt5033_battery_get_present(struct i2c_client *client)
+{
+ struct rt5033_battery *battery = i2c_get_clientdata(client);
+ u32 val;
+
+ regmap_read(battery->regmap, RT5033_FUEL_REG_CONFIG_L, &val);
+
+ return (val & RT5033_FUEL_BAT_PRESENT) ? true : false;
+}
+
+static int rt5033_battery_get_watt_prop(struct i2c_client *client,
+ enum power_supply_property psp)
+{
+ struct rt5033_battery *battery = i2c_get_clientdata(client);
+ unsigned int regh, regl;
+ int ret;
+ u32 msb, lsb;
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+ regh = RT5033_FUEL_REG_VBAT_H;
+ regl = RT5033_FUEL_REG_VBAT_L;
+ break;
+ case POWER_SUPPLY_PROP_VOLTAGE_AVG:
+ regh = RT5033_FUEL_REG_AVG_VOLT_H;
+ regl = RT5033_FUEL_REG_AVG_VOLT_L;
+ break;
+ case POWER_SUPPLY_PROP_VOLTAGE_OCV:
+ regh = RT5033_FUEL_REG_OCV_H;
+ regl = RT5033_FUEL_REG_OCV_L;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ regmap_read(battery->regmap, regh, &msb);
+ regmap_read(battery->regmap, regl, &lsb);
+
+ ret = ((msb << 4) + (lsb >> 4)) * 1250;
+
+ return ret;
+}
+
+static int rt5033_battery_get_property(struct power_supply *psy,
+ enum power_supply_property psp,
+ union power_supply_propval *val)
+{
+ struct rt5033_battery *battery = power_supply_get_drvdata(psy);
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+ case POWER_SUPPLY_PROP_VOLTAGE_AVG:
+ case POWER_SUPPLY_PROP_VOLTAGE_OCV:
+ val->intval = rt5033_battery_get_watt_prop(battery->client,
+ psp);
+ break;
+ case POWER_SUPPLY_PROP_PRESENT:
+ val->intval = rt5033_battery_get_present(battery->client);
+ break;
+ case POWER_SUPPLY_PROP_CAPACITY:
+ val->intval = rt5033_battery_get_capacity(battery->client);
+ break;
+ default:
+ return -EINVAL;
+ }
+ return 0;
+}
+
+static enum power_supply_property rt5033_battery_props[] = {
+ POWER_SUPPLY_PROP_VOLTAGE_NOW,
+ POWER_SUPPLY_PROP_VOLTAGE_AVG,
+ POWER_SUPPLY_PROP_VOLTAGE_OCV,
+ POWER_SUPPLY_PROP_PRESENT,
+ POWER_SUPPLY_PROP_CAPACITY,
+};
+
+static const struct regmap_config rt5033_battery_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+ .max_register = RT5033_FUEL_REG_END,
+};
+
+static const struct power_supply_desc rt5033_battery_desc = {
+ .name = "rt5033-battery",
+ .type = POWER_SUPPLY_TYPE_BATTERY,
+ .get_property = rt5033_battery_get_property,
+ .properties = rt5033_battery_props,
+ .num_properties = ARRAY_SIZE(rt5033_battery_props),
+};
+
+static int rt5033_battery_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct i2c_adapter *adapter = client->adapter;
+ struct power_supply_config psy_cfg = {};
+ struct rt5033_battery *battery;
+ u32 ret;
+
+ if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE))
+ return -EIO;
+
+ battery = devm_kzalloc(&client->dev, sizeof(*battery), GFP_KERNEL);
+ if (!battery)
+ return -ENOMEM;
+
+ battery->client = client;
+ battery->regmap = devm_regmap_init_i2c(client,
+ &rt5033_battery_regmap_config);
+ if (IS_ERR(battery->regmap)) {
+ dev_err(&client->dev, "Failed to initialize regmap\n");
+ return -EINVAL;
+ }
+
+ i2c_set_clientdata(client, battery);
+ psy_cfg.drv_data = battery;
+
+ battery->psy = power_supply_register(&client->dev,
+ &rt5033_battery_desc, &psy_cfg);
+ if (IS_ERR(battery->psy)) {
+ dev_err(&client->dev, "Failed to register power supply\n");
+ ret = PTR_ERR(battery->psy);
+ return ret;
+ }
+
+ return 0;
+}
+
+static int rt5033_battery_remove(struct i2c_client *client)
+{
+ struct rt5033_battery *battery = i2c_get_clientdata(client);
+
+ power_supply_unregister(battery->psy);
+
+ return 0;
+}
+
+static const struct i2c_device_id rt5033_battery_id[] = {
+ { "rt5033-battery", },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, rt5033_battery_id);
+
+static const struct of_device_id rt5033_battery_of_match[] = {
+ { .compatible = "richtek,rt5033-battery", },
+ { }
+};
+MODULE_DEVICE_TABLE(of, rt5033_battery_of_match);
+
+static struct i2c_driver rt5033_battery_driver = {
+ .driver = {
+ .name = "rt5033-battery",
+ .of_match_table = rt5033_battery_of_match,
+ },
+ .probe = rt5033_battery_probe,
+ .remove = rt5033_battery_remove,
+ .id_table = rt5033_battery_id,
+};
+module_i2c_driver(rt5033_battery_driver);
+
+MODULE_DESCRIPTION("Richtek RT5033 fuel gauge driver");
+MODULE_AUTHOR("Beomho Seo <beomho.seo@samsung.com>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/power/supply/rt9455_charger.c b/drivers/power/supply/rt9455_charger.c
new file mode 100644
index 000000000..594bb3b8a
--- /dev/null
+++ b/drivers/power/supply/rt9455_charger.c
@@ -0,0 +1,1756 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Driver for Richtek RT9455WSC battery charger.
+ *
+ * Copyright (C) 2015 Intel Corporation
+ */
+
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/of_irq.h>
+#include <linux/of_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/power_supply.h>
+#include <linux/i2c.h>
+#include <linux/acpi.h>
+#include <linux/usb/phy.h>
+#include <linux/regmap.h>
+
+#define RT9455_MANUFACTURER "Richtek"
+#define RT9455_MODEL_NAME "RT9455"
+#define RT9455_DRIVER_NAME "rt9455-charger"
+
+#define RT9455_IRQ_NAME "interrupt"
+
+#define RT9455_PWR_RDY_DELAY 1 /* 1 second */
+#define RT9455_MAX_CHARGING_TIME 21600 /* 6 hrs */
+#define RT9455_BATT_PRESENCE_DELAY 60 /* 60 seconds */
+
+#define RT9455_CHARGE_MODE 0x00
+#define RT9455_BOOST_MODE 0x01
+
+#define RT9455_FAULT 0x03
+
+#define RT9455_IAICR_100MA 0x00
+#define RT9455_IAICR_500MA 0x01
+#define RT9455_IAICR_NO_LIMIT 0x03
+
+#define RT9455_CHARGE_DISABLE 0x00
+#define RT9455_CHARGE_ENABLE 0x01
+
+#define RT9455_PWR_FAULT 0x00
+#define RT9455_PWR_GOOD 0x01
+
+#define RT9455_REG_CTRL1 0x00 /* CTRL1 reg address */
+#define RT9455_REG_CTRL2 0x01 /* CTRL2 reg address */
+#define RT9455_REG_CTRL3 0x02 /* CTRL3 reg address */
+#define RT9455_REG_DEV_ID 0x03 /* DEV_ID reg address */
+#define RT9455_REG_CTRL4 0x04 /* CTRL4 reg address */
+#define RT9455_REG_CTRL5 0x05 /* CTRL5 reg address */
+#define RT9455_REG_CTRL6 0x06 /* CTRL6 reg address */
+#define RT9455_REG_CTRL7 0x07 /* CTRL7 reg address */
+#define RT9455_REG_IRQ1 0x08 /* IRQ1 reg address */
+#define RT9455_REG_IRQ2 0x09 /* IRQ2 reg address */
+#define RT9455_REG_IRQ3 0x0A /* IRQ3 reg address */
+#define RT9455_REG_MASK1 0x0B /* MASK1 reg address */
+#define RT9455_REG_MASK2 0x0C /* MASK2 reg address */
+#define RT9455_REG_MASK3 0x0D /* MASK3 reg address */
+
+enum rt9455_fields {
+ F_STAT, F_BOOST, F_PWR_RDY, F_OTG_PIN_POLARITY, /* CTRL1 reg fields */
+
+ F_IAICR, F_TE_SHDN_EN, F_HIGHER_OCP, F_TE, F_IAICR_INT, F_HIZ,
+ F_OPA_MODE, /* CTRL2 reg fields */
+
+ F_VOREG, F_OTG_PL, F_OTG_EN, /* CTRL3 reg fields */
+
+ F_VENDOR_ID, F_CHIP_REV, /* DEV_ID reg fields */
+
+ F_RST, /* CTRL4 reg fields */
+
+ F_TMR_EN, F_MIVR, F_IPREC, F_IEOC_PERCENTAGE, /* CTRL5 reg fields*/
+
+ F_IAICR_SEL, F_ICHRG, F_VPREC, /* CTRL6 reg fields */
+
+ F_BATD_EN, F_CHG_EN, F_VMREG, /* CTRL7 reg fields */
+
+ F_TSDI, F_VINOVPI, F_BATAB, /* IRQ1 reg fields */
+
+ F_CHRVPI, F_CHBATOVI, F_CHTERMI, F_CHRCHGI, F_CH32MI, F_CHTREGI,
+ F_CHMIVRI, /* IRQ2 reg fields */
+
+ F_BSTBUSOVI, F_BSTOLI, F_BSTLOWVI, F_BST32SI, /* IRQ3 reg fields */
+
+ F_TSDM, F_VINOVPIM, F_BATABM, /* MASK1 reg fields */
+
+ F_CHRVPIM, F_CHBATOVIM, F_CHTERMIM, F_CHRCHGIM, F_CH32MIM, F_CHTREGIM,
+ F_CHMIVRIM, /* MASK2 reg fields */
+
+ F_BSTVINOVIM, F_BSTOLIM, F_BSTLOWVIM, F_BST32SIM, /* MASK3 reg fields */
+
+ F_MAX_FIELDS
+};
+
+static const struct reg_field rt9455_reg_fields[] = {
+ [F_STAT] = REG_FIELD(RT9455_REG_CTRL1, 4, 5),
+ [F_BOOST] = REG_FIELD(RT9455_REG_CTRL1, 3, 3),
+ [F_PWR_RDY] = REG_FIELD(RT9455_REG_CTRL1, 2, 2),
+ [F_OTG_PIN_POLARITY] = REG_FIELD(RT9455_REG_CTRL1, 1, 1),
+
+ [F_IAICR] = REG_FIELD(RT9455_REG_CTRL2, 6, 7),
+ [F_TE_SHDN_EN] = REG_FIELD(RT9455_REG_CTRL2, 5, 5),
+ [F_HIGHER_OCP] = REG_FIELD(RT9455_REG_CTRL2, 4, 4),
+ [F_TE] = REG_FIELD(RT9455_REG_CTRL2, 3, 3),
+ [F_IAICR_INT] = REG_FIELD(RT9455_REG_CTRL2, 2, 2),
+ [F_HIZ] = REG_FIELD(RT9455_REG_CTRL2, 1, 1),
+ [F_OPA_MODE] = REG_FIELD(RT9455_REG_CTRL2, 0, 0),
+
+ [F_VOREG] = REG_FIELD(RT9455_REG_CTRL3, 2, 7),
+ [F_OTG_PL] = REG_FIELD(RT9455_REG_CTRL3, 1, 1),
+ [F_OTG_EN] = REG_FIELD(RT9455_REG_CTRL3, 0, 0),
+
+ [F_VENDOR_ID] = REG_FIELD(RT9455_REG_DEV_ID, 4, 7),
+ [F_CHIP_REV] = REG_FIELD(RT9455_REG_DEV_ID, 0, 3),
+
+ [F_RST] = REG_FIELD(RT9455_REG_CTRL4, 7, 7),
+
+ [F_TMR_EN] = REG_FIELD(RT9455_REG_CTRL5, 7, 7),
+ [F_MIVR] = REG_FIELD(RT9455_REG_CTRL5, 4, 5),
+ [F_IPREC] = REG_FIELD(RT9455_REG_CTRL5, 2, 3),
+ [F_IEOC_PERCENTAGE] = REG_FIELD(RT9455_REG_CTRL5, 0, 1),
+
+ [F_IAICR_SEL] = REG_FIELD(RT9455_REG_CTRL6, 7, 7),
+ [F_ICHRG] = REG_FIELD(RT9455_REG_CTRL6, 4, 6),
+ [F_VPREC] = REG_FIELD(RT9455_REG_CTRL6, 0, 2),
+
+ [F_BATD_EN] = REG_FIELD(RT9455_REG_CTRL7, 6, 6),
+ [F_CHG_EN] = REG_FIELD(RT9455_REG_CTRL7, 4, 4),
+ [F_VMREG] = REG_FIELD(RT9455_REG_CTRL7, 0, 3),
+
+ [F_TSDI] = REG_FIELD(RT9455_REG_IRQ1, 7, 7),
+ [F_VINOVPI] = REG_FIELD(RT9455_REG_IRQ1, 6, 6),
+ [F_BATAB] = REG_FIELD(RT9455_REG_IRQ1, 0, 0),
+
+ [F_CHRVPI] = REG_FIELD(RT9455_REG_IRQ2, 7, 7),
+ [F_CHBATOVI] = REG_FIELD(RT9455_REG_IRQ2, 5, 5),
+ [F_CHTERMI] = REG_FIELD(RT9455_REG_IRQ2, 4, 4),
+ [F_CHRCHGI] = REG_FIELD(RT9455_REG_IRQ2, 3, 3),
+ [F_CH32MI] = REG_FIELD(RT9455_REG_IRQ2, 2, 2),
+ [F_CHTREGI] = REG_FIELD(RT9455_REG_IRQ2, 1, 1),
+ [F_CHMIVRI] = REG_FIELD(RT9455_REG_IRQ2, 0, 0),
+
+ [F_BSTBUSOVI] = REG_FIELD(RT9455_REG_IRQ3, 7, 7),
+ [F_BSTOLI] = REG_FIELD(RT9455_REG_IRQ3, 6, 6),
+ [F_BSTLOWVI] = REG_FIELD(RT9455_REG_IRQ3, 5, 5),
+ [F_BST32SI] = REG_FIELD(RT9455_REG_IRQ3, 3, 3),
+
+ [F_TSDM] = REG_FIELD(RT9455_REG_MASK1, 7, 7),
+ [F_VINOVPIM] = REG_FIELD(RT9455_REG_MASK1, 6, 6),
+ [F_BATABM] = REG_FIELD(RT9455_REG_MASK1, 0, 0),
+
+ [F_CHRVPIM] = REG_FIELD(RT9455_REG_MASK2, 7, 7),
+ [F_CHBATOVIM] = REG_FIELD(RT9455_REG_MASK2, 5, 5),
+ [F_CHTERMIM] = REG_FIELD(RT9455_REG_MASK2, 4, 4),
+ [F_CHRCHGIM] = REG_FIELD(RT9455_REG_MASK2, 3, 3),
+ [F_CH32MIM] = REG_FIELD(RT9455_REG_MASK2, 2, 2),
+ [F_CHTREGIM] = REG_FIELD(RT9455_REG_MASK2, 1, 1),
+ [F_CHMIVRIM] = REG_FIELD(RT9455_REG_MASK2, 0, 0),
+
+ [F_BSTVINOVIM] = REG_FIELD(RT9455_REG_MASK3, 7, 7),
+ [F_BSTOLIM] = REG_FIELD(RT9455_REG_MASK3, 6, 6),
+ [F_BSTLOWVIM] = REG_FIELD(RT9455_REG_MASK3, 5, 5),
+ [F_BST32SIM] = REG_FIELD(RT9455_REG_MASK3, 3, 3),
+};
+
+#define GET_MASK(fid) (BIT(rt9455_reg_fields[fid].msb + 1) - \
+ BIT(rt9455_reg_fields[fid].lsb))
+
+/*
+ * Each array initialised below shows the possible real-world values for a
+ * group of bits belonging to RT9455 registers. The arrays are sorted in
+ * ascending order. The index of each real-world value represents the value
+ * that is encoded in the group of bits belonging to RT9455 registers.
+ */
+/* REG06[6:4] (ICHRG) in uAh */
+static const int rt9455_ichrg_values[] = {
+ 500000, 650000, 800000, 950000, 1100000, 1250000, 1400000, 1550000
+};
+
+/*
+ * When the charger is in charge mode, REG02[7:2] represent battery regulation
+ * voltage.
+ */
+/* REG02[7:2] (VOREG) in uV */
+static const int rt9455_voreg_values[] = {
+ 3500000, 3520000, 3540000, 3560000, 3580000, 3600000, 3620000, 3640000,
+ 3660000, 3680000, 3700000, 3720000, 3740000, 3760000, 3780000, 3800000,
+ 3820000, 3840000, 3860000, 3880000, 3900000, 3920000, 3940000, 3960000,
+ 3980000, 4000000, 4020000, 4040000, 4060000, 4080000, 4100000, 4120000,
+ 4140000, 4160000, 4180000, 4200000, 4220000, 4240000, 4260000, 4280000,
+ 4300000, 4330000, 4350000, 4370000, 4390000, 4410000, 4430000, 4450000,
+ 4450000, 4450000, 4450000, 4450000, 4450000, 4450000, 4450000, 4450000,
+ 4450000, 4450000, 4450000, 4450000, 4450000, 4450000, 4450000, 4450000
+};
+
+/*
+ * When the charger is in boost mode, REG02[7:2] represent boost output
+ * voltage.
+ */
+/* REG02[7:2] (Boost output voltage) in uV */
+static const int rt9455_boost_voltage_values[] = {
+ 4425000, 4450000, 4475000, 4500000, 4525000, 4550000, 4575000, 4600000,
+ 4625000, 4650000, 4675000, 4700000, 4725000, 4750000, 4775000, 4800000,
+ 4825000, 4850000, 4875000, 4900000, 4925000, 4950000, 4975000, 5000000,
+ 5025000, 5050000, 5075000, 5100000, 5125000, 5150000, 5175000, 5200000,
+ 5225000, 5250000, 5275000, 5300000, 5325000, 5350000, 5375000, 5400000,
+ 5425000, 5450000, 5475000, 5500000, 5525000, 5550000, 5575000, 5600000,
+ 5600000, 5600000, 5600000, 5600000, 5600000, 5600000, 5600000, 5600000,
+ 5600000, 5600000, 5600000, 5600000, 5600000, 5600000, 5600000, 5600000,
+};
+
+/* REG07[3:0] (VMREG) in uV */
+static const int rt9455_vmreg_values[] = {
+ 4200000, 4220000, 4240000, 4260000, 4280000, 4300000, 4320000, 4340000,
+ 4360000, 4380000, 4400000, 4430000, 4450000, 4450000, 4450000, 4450000
+};
+
+/* REG05[5:4] (IEOC_PERCENTAGE) */
+static const int rt9455_ieoc_percentage_values[] = {
+ 10, 30, 20, 30
+};
+
+/* REG05[1:0] (MIVR) in uV */
+static const int rt9455_mivr_values[] = {
+ 4000000, 4250000, 4500000, 5000000
+};
+
+/* REG05[1:0] (IAICR) in uA */
+static const int rt9455_iaicr_values[] = {
+ 100000, 500000, 1000000, 2000000
+};
+
+struct rt9455_info {
+ struct i2c_client *client;
+ struct regmap *regmap;
+ struct regmap_field *regmap_fields[F_MAX_FIELDS];
+ struct power_supply *charger;
+#if IS_ENABLED(CONFIG_USB_PHY)
+ struct usb_phy *usb_phy;
+ struct notifier_block nb;
+#endif
+ struct delayed_work pwr_rdy_work;
+ struct delayed_work max_charging_time_work;
+ struct delayed_work batt_presence_work;
+ u32 voreg;
+ u32 boost_voltage;
+};
+
+/*
+ * Iterate through each element of the 'tbl' array until an element whose value
+ * is greater than v is found. Return the index of the respective element,
+ * or the index of the last element in the array, if no such element is found.
+ */
+static unsigned int rt9455_find_idx(const int tbl[], int tbl_size, int v)
+{
+ int i;
+
+ /*
+ * No need to iterate until the last index in the table because
+ * if no element greater than v is found in the table,
+ * or if only the last element is greater than v,
+ * function returns the index of the last element.
+ */
+ for (i = 0; i < tbl_size - 1; i++)
+ if (v <= tbl[i])
+ return i;
+
+ return (tbl_size - 1);
+}
+
+static int rt9455_get_field_val(struct rt9455_info *info,
+ enum rt9455_fields field,
+ const int tbl[], int tbl_size, int *val)
+{
+ unsigned int v;
+ int ret;
+
+ ret = regmap_field_read(info->regmap_fields[field], &v);
+ if (ret)
+ return ret;
+
+ v = (v >= tbl_size) ? (tbl_size - 1) : v;
+ *val = tbl[v];
+
+ return 0;
+}
+
+static int rt9455_set_field_val(struct rt9455_info *info,
+ enum rt9455_fields field,
+ const int tbl[], int tbl_size, int val)
+{
+ unsigned int idx = rt9455_find_idx(tbl, tbl_size, val);
+
+ return regmap_field_write(info->regmap_fields[field], idx);
+}
+
+static int rt9455_register_reset(struct rt9455_info *info)
+{
+ struct device *dev = &info->client->dev;
+ unsigned int v;
+ int ret, limit = 100;
+
+ ret = regmap_field_write(info->regmap_fields[F_RST], 0x01);
+ if (ret) {
+ dev_err(dev, "Failed to set RST bit\n");
+ return ret;
+ }
+
+ /*
+ * To make sure that reset operation has finished, loop until RST bit
+ * is set to 0.
+ */
+ do {
+ ret = regmap_field_read(info->regmap_fields[F_RST], &v);
+ if (ret) {
+ dev_err(dev, "Failed to read RST bit\n");
+ return ret;
+ }
+
+ if (!v)
+ break;
+
+ usleep_range(10, 100);
+ } while (--limit);
+
+ if (!limit)
+ return -EIO;
+
+ return 0;
+}
+
+/* Charger power supply property routines */
+static enum power_supply_property rt9455_charger_properties[] = {
+ POWER_SUPPLY_PROP_STATUS,
+ POWER_SUPPLY_PROP_HEALTH,
+ POWER_SUPPLY_PROP_PRESENT,
+ POWER_SUPPLY_PROP_ONLINE,
+ POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT,
+ POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX,
+ POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE,
+ POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX,
+ POWER_SUPPLY_PROP_SCOPE,
+ POWER_SUPPLY_PROP_CHARGE_TERM_CURRENT,
+ POWER_SUPPLY_PROP_MODEL_NAME,
+ POWER_SUPPLY_PROP_MANUFACTURER,
+};
+
+static char *rt9455_charger_supplied_to[] = {
+ "main-battery",
+};
+
+static int rt9455_charger_get_status(struct rt9455_info *info,
+ union power_supply_propval *val)
+{
+ unsigned int v, pwr_rdy;
+ int ret;
+
+ ret = regmap_field_read(info->regmap_fields[F_PWR_RDY],
+ &pwr_rdy);
+ if (ret) {
+ dev_err(&info->client->dev, "Failed to read PWR_RDY bit\n");
+ return ret;
+ }
+
+ /*
+ * If PWR_RDY bit is unset, the battery is discharging. Otherwise,
+ * STAT bits value must be checked.
+ */
+ if (!pwr_rdy) {
+ val->intval = POWER_SUPPLY_STATUS_DISCHARGING;
+ return 0;
+ }
+
+ ret = regmap_field_read(info->regmap_fields[F_STAT], &v);
+ if (ret) {
+ dev_err(&info->client->dev, "Failed to read STAT bits\n");
+ return ret;
+ }
+
+ switch (v) {
+ case 0:
+ /*
+ * If PWR_RDY bit is set, but STAT bits value is 0, the charger
+ * may be in one of the following cases:
+ * 1. CHG_EN bit is 0.
+ * 2. CHG_EN bit is 1 but the battery is not connected.
+ * In any of these cases, POWER_SUPPLY_STATUS_NOT_CHARGING is
+ * returned.
+ */
+ val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING;
+ return 0;
+ case 1:
+ val->intval = POWER_SUPPLY_STATUS_CHARGING;
+ return 0;
+ case 2:
+ val->intval = POWER_SUPPLY_STATUS_FULL;
+ return 0;
+ default:
+ val->intval = POWER_SUPPLY_STATUS_UNKNOWN;
+ return 0;
+ }
+}
+
+static int rt9455_charger_get_health(struct rt9455_info *info,
+ union power_supply_propval *val)
+{
+ struct device *dev = &info->client->dev;
+ unsigned int v;
+ int ret;
+
+ val->intval = POWER_SUPPLY_HEALTH_GOOD;
+
+ ret = regmap_read(info->regmap, RT9455_REG_IRQ1, &v);
+ if (ret) {
+ dev_err(dev, "Failed to read IRQ1 register\n");
+ return ret;
+ }
+
+ if (v & GET_MASK(F_TSDI)) {
+ val->intval = POWER_SUPPLY_HEALTH_OVERHEAT;
+ return 0;
+ }
+ if (v & GET_MASK(F_VINOVPI)) {
+ val->intval = POWER_SUPPLY_HEALTH_OVERVOLTAGE;
+ return 0;
+ }
+ if (v & GET_MASK(F_BATAB)) {
+ val->intval = POWER_SUPPLY_HEALTH_UNSPEC_FAILURE;
+ return 0;
+ }
+
+ ret = regmap_read(info->regmap, RT9455_REG_IRQ2, &v);
+ if (ret) {
+ dev_err(dev, "Failed to read IRQ2 register\n");
+ return ret;
+ }
+
+ if (v & GET_MASK(F_CHBATOVI)) {
+ val->intval = POWER_SUPPLY_HEALTH_UNSPEC_FAILURE;
+ return 0;
+ }
+ if (v & GET_MASK(F_CH32MI)) {
+ val->intval = POWER_SUPPLY_HEALTH_SAFETY_TIMER_EXPIRE;
+ return 0;
+ }
+
+ ret = regmap_read(info->regmap, RT9455_REG_IRQ3, &v);
+ if (ret) {
+ dev_err(dev, "Failed to read IRQ3 register\n");
+ return ret;
+ }
+
+ if (v & GET_MASK(F_BSTBUSOVI)) {
+ val->intval = POWER_SUPPLY_HEALTH_UNSPEC_FAILURE;
+ return 0;
+ }
+ if (v & GET_MASK(F_BSTOLI)) {
+ val->intval = POWER_SUPPLY_HEALTH_OVERVOLTAGE;
+ return 0;
+ }
+ if (v & GET_MASK(F_BSTLOWVI)) {
+ val->intval = POWER_SUPPLY_HEALTH_UNSPEC_FAILURE;
+ return 0;
+ }
+ if (v & GET_MASK(F_BST32SI)) {
+ val->intval = POWER_SUPPLY_HEALTH_SAFETY_TIMER_EXPIRE;
+ return 0;
+ }
+
+ ret = regmap_field_read(info->regmap_fields[F_STAT], &v);
+ if (ret) {
+ dev_err(dev, "Failed to read STAT bits\n");
+ return ret;
+ }
+
+ if (v == RT9455_FAULT) {
+ val->intval = POWER_SUPPLY_HEALTH_UNSPEC_FAILURE;
+ return 0;
+ }
+
+ return 0;
+}
+
+static int rt9455_charger_get_battery_presence(struct rt9455_info *info,
+ union power_supply_propval *val)
+{
+ unsigned int v;
+ int ret;
+
+ ret = regmap_field_read(info->regmap_fields[F_BATAB], &v);
+ if (ret) {
+ dev_err(&info->client->dev, "Failed to read BATAB bit\n");
+ return ret;
+ }
+
+ /*
+ * Since BATAB is 1 when battery is NOT present and 0 otherwise,
+ * !BATAB is returned.
+ */
+ val->intval = !v;
+
+ return 0;
+}
+
+static int rt9455_charger_get_online(struct rt9455_info *info,
+ union power_supply_propval *val)
+{
+ unsigned int v;
+ int ret;
+
+ ret = regmap_field_read(info->regmap_fields[F_PWR_RDY], &v);
+ if (ret) {
+ dev_err(&info->client->dev, "Failed to read PWR_RDY bit\n");
+ return ret;
+ }
+
+ val->intval = (int)v;
+
+ return 0;
+}
+
+static int rt9455_charger_get_current(struct rt9455_info *info,
+ union power_supply_propval *val)
+{
+ int curr;
+ int ret;
+
+ ret = rt9455_get_field_val(info, F_ICHRG,
+ rt9455_ichrg_values,
+ ARRAY_SIZE(rt9455_ichrg_values),
+ &curr);
+ if (ret) {
+ dev_err(&info->client->dev, "Failed to read ICHRG value\n");
+ return ret;
+ }
+
+ val->intval = curr;
+
+ return 0;
+}
+
+static int rt9455_charger_get_current_max(struct rt9455_info *info,
+ union power_supply_propval *val)
+{
+ int idx = ARRAY_SIZE(rt9455_ichrg_values) - 1;
+
+ val->intval = rt9455_ichrg_values[idx];
+
+ return 0;
+}
+
+static int rt9455_charger_get_voltage(struct rt9455_info *info,
+ union power_supply_propval *val)
+{
+ int voltage;
+ int ret;
+
+ ret = rt9455_get_field_val(info, F_VOREG,
+ rt9455_voreg_values,
+ ARRAY_SIZE(rt9455_voreg_values),
+ &voltage);
+ if (ret) {
+ dev_err(&info->client->dev, "Failed to read VOREG value\n");
+ return ret;
+ }
+
+ val->intval = voltage;
+
+ return 0;
+}
+
+static int rt9455_charger_get_voltage_max(struct rt9455_info *info,
+ union power_supply_propval *val)
+{
+ int idx = ARRAY_SIZE(rt9455_vmreg_values) - 1;
+
+ val->intval = rt9455_vmreg_values[idx];
+
+ return 0;
+}
+
+static int rt9455_charger_get_term_current(struct rt9455_info *info,
+ union power_supply_propval *val)
+{
+ struct device *dev = &info->client->dev;
+ int ichrg, ieoc_percentage, ret;
+
+ ret = rt9455_get_field_val(info, F_ICHRG,
+ rt9455_ichrg_values,
+ ARRAY_SIZE(rt9455_ichrg_values),
+ &ichrg);
+ if (ret) {
+ dev_err(dev, "Failed to read ICHRG value\n");
+ return ret;
+ }
+
+ ret = rt9455_get_field_val(info, F_IEOC_PERCENTAGE,
+ rt9455_ieoc_percentage_values,
+ ARRAY_SIZE(rt9455_ieoc_percentage_values),
+ &ieoc_percentage);
+ if (ret) {
+ dev_err(dev, "Failed to read IEOC value\n");
+ return ret;
+ }
+
+ val->intval = ichrg * ieoc_percentage / 100;
+
+ return 0;
+}
+
+static int rt9455_charger_get_property(struct power_supply *psy,
+ enum power_supply_property psp,
+ union power_supply_propval *val)
+{
+ struct rt9455_info *info = power_supply_get_drvdata(psy);
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_STATUS:
+ return rt9455_charger_get_status(info, val);
+ case POWER_SUPPLY_PROP_HEALTH:
+ return rt9455_charger_get_health(info, val);
+ case POWER_SUPPLY_PROP_PRESENT:
+ return rt9455_charger_get_battery_presence(info, val);
+ case POWER_SUPPLY_PROP_ONLINE:
+ return rt9455_charger_get_online(info, val);
+ case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT:
+ return rt9455_charger_get_current(info, val);
+ case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX:
+ return rt9455_charger_get_current_max(info, val);
+ case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE:
+ return rt9455_charger_get_voltage(info, val);
+ case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX:
+ return rt9455_charger_get_voltage_max(info, val);
+ case POWER_SUPPLY_PROP_SCOPE:
+ val->intval = POWER_SUPPLY_SCOPE_SYSTEM;
+ return 0;
+ case POWER_SUPPLY_PROP_CHARGE_TERM_CURRENT:
+ return rt9455_charger_get_term_current(info, val);
+ case POWER_SUPPLY_PROP_MODEL_NAME:
+ val->strval = RT9455_MODEL_NAME;
+ return 0;
+ case POWER_SUPPLY_PROP_MANUFACTURER:
+ val->strval = RT9455_MANUFACTURER;
+ return 0;
+ default:
+ return -ENODATA;
+ }
+}
+
+static int rt9455_hw_init(struct rt9455_info *info, u32 ichrg,
+ u32 ieoc_percentage,
+ u32 mivr, u32 iaicr)
+{
+ struct device *dev = &info->client->dev;
+ int idx, ret;
+
+ ret = rt9455_register_reset(info);
+ if (ret) {
+ dev_err(dev, "Power On Reset failed\n");
+ return ret;
+ }
+
+ /* Set TE bit in order to enable end of charge detection */
+ ret = regmap_field_write(info->regmap_fields[F_TE], 1);
+ if (ret) {
+ dev_err(dev, "Failed to set TE bit\n");
+ return ret;
+ }
+
+ /* Set TE_SHDN_EN bit in order to enable end of charge detection */
+ ret = regmap_field_write(info->regmap_fields[F_TE_SHDN_EN], 1);
+ if (ret) {
+ dev_err(dev, "Failed to set TE_SHDN_EN bit\n");
+ return ret;
+ }
+
+ /*
+ * Set BATD_EN bit in order to enable battery detection
+ * when charging is done
+ */
+ ret = regmap_field_write(info->regmap_fields[F_BATD_EN], 1);
+ if (ret) {
+ dev_err(dev, "Failed to set BATD_EN bit\n");
+ return ret;
+ }
+
+ /*
+ * Disable Safety Timer. In charge mode, this timer terminates charging
+ * if no read or write via I2C is done within 32 minutes. This timer
+ * avoids overcharging the baterry when the OS is not loaded and the
+ * charger is connected to a power source.
+ * In boost mode, this timer triggers BST32SI interrupt if no read or
+ * write via I2C is done within 32 seconds.
+ * When the OS is loaded and the charger driver is inserted, it is used
+ * delayed_work, named max_charging_time_work, to avoid overcharging
+ * the battery.
+ */
+ ret = regmap_field_write(info->regmap_fields[F_TMR_EN], 0x00);
+ if (ret) {
+ dev_err(dev, "Failed to disable Safety Timer\n");
+ return ret;
+ }
+
+ /* Set ICHRG to value retrieved from device-specific data */
+ ret = rt9455_set_field_val(info, F_ICHRG,
+ rt9455_ichrg_values,
+ ARRAY_SIZE(rt9455_ichrg_values), ichrg);
+ if (ret) {
+ dev_err(dev, "Failed to set ICHRG value\n");
+ return ret;
+ }
+
+ /* Set IEOC Percentage to value retrieved from device-specific data */
+ ret = rt9455_set_field_val(info, F_IEOC_PERCENTAGE,
+ rt9455_ieoc_percentage_values,
+ ARRAY_SIZE(rt9455_ieoc_percentage_values),
+ ieoc_percentage);
+ if (ret) {
+ dev_err(dev, "Failed to set IEOC Percentage value\n");
+ return ret;
+ }
+
+ /* Set VOREG to value retrieved from device-specific data */
+ ret = rt9455_set_field_val(info, F_VOREG,
+ rt9455_voreg_values,
+ ARRAY_SIZE(rt9455_voreg_values),
+ info->voreg);
+ if (ret) {
+ dev_err(dev, "Failed to set VOREG value\n");
+ return ret;
+ }
+
+ /* Set VMREG value to maximum (4.45V). */
+ idx = ARRAY_SIZE(rt9455_vmreg_values) - 1;
+ ret = rt9455_set_field_val(info, F_VMREG,
+ rt9455_vmreg_values,
+ ARRAY_SIZE(rt9455_vmreg_values),
+ rt9455_vmreg_values[idx]);
+ if (ret) {
+ dev_err(dev, "Failed to set VMREG value\n");
+ return ret;
+ }
+
+ /*
+ * Set MIVR to value retrieved from device-specific data.
+ * If no value is specified, default value for MIVR is 4.5V.
+ */
+ if (mivr == -1)
+ mivr = 4500000;
+
+ ret = rt9455_set_field_val(info, F_MIVR,
+ rt9455_mivr_values,
+ ARRAY_SIZE(rt9455_mivr_values), mivr);
+ if (ret) {
+ dev_err(dev, "Failed to set MIVR value\n");
+ return ret;
+ }
+
+ /*
+ * Set IAICR to value retrieved from device-specific data.
+ * If no value is specified, default value for IAICR is 500 mA.
+ */
+ if (iaicr == -1)
+ iaicr = 500000;
+
+ ret = rt9455_set_field_val(info, F_IAICR,
+ rt9455_iaicr_values,
+ ARRAY_SIZE(rt9455_iaicr_values), iaicr);
+ if (ret) {
+ dev_err(dev, "Failed to set IAICR value\n");
+ return ret;
+ }
+
+ /*
+ * Set IAICR_INT bit so that IAICR value is determined by IAICR bits
+ * and not by OTG pin.
+ */
+ ret = regmap_field_write(info->regmap_fields[F_IAICR_INT], 0x01);
+ if (ret) {
+ dev_err(dev, "Failed to set IAICR_INT bit\n");
+ return ret;
+ }
+
+ /*
+ * Disable CHMIVRI interrupt. Because the driver sets MIVR value,
+ * CHMIVRI is triggered, but there is no action to be taken by the
+ * driver when CHMIVRI is triggered.
+ */
+ ret = regmap_field_write(info->regmap_fields[F_CHMIVRIM], 0x01);
+ if (ret) {
+ dev_err(dev, "Failed to mask CHMIVRI interrupt\n");
+ return ret;
+ }
+
+ return 0;
+}
+
+#if IS_ENABLED(CONFIG_USB_PHY)
+/*
+ * Before setting the charger into boost mode, boost output voltage is
+ * set. This is needed because boost output voltage may differ from battery
+ * regulation voltage. F_VOREG bits represent either battery regulation voltage
+ * or boost output voltage, depending on the mode the charger is. Both battery
+ * regulation voltage and boost output voltage are read from DT/ACPI during
+ * probe.
+ */
+static int rt9455_set_boost_voltage_before_boost_mode(struct rt9455_info *info)
+{
+ struct device *dev = &info->client->dev;
+ int ret;
+
+ ret = rt9455_set_field_val(info, F_VOREG,
+ rt9455_boost_voltage_values,
+ ARRAY_SIZE(rt9455_boost_voltage_values),
+ info->boost_voltage);
+ if (ret) {
+ dev_err(dev, "Failed to set boost output voltage value\n");
+ return ret;
+ }
+
+ return 0;
+}
+#endif
+
+/*
+ * Before setting the charger into charge mode, battery regulation voltage is
+ * set. This is needed because boost output voltage may differ from battery
+ * regulation voltage. F_VOREG bits represent either battery regulation voltage
+ * or boost output voltage, depending on the mode the charger is. Both battery
+ * regulation voltage and boost output voltage are read from DT/ACPI during
+ * probe.
+ */
+static int rt9455_set_voreg_before_charge_mode(struct rt9455_info *info)
+{
+ struct device *dev = &info->client->dev;
+ int ret;
+
+ ret = rt9455_set_field_val(info, F_VOREG,
+ rt9455_voreg_values,
+ ARRAY_SIZE(rt9455_voreg_values),
+ info->voreg);
+ if (ret) {
+ dev_err(dev, "Failed to set VOREG value\n");
+ return ret;
+ }
+
+ return 0;
+}
+
+static int rt9455_irq_handler_check_irq1_register(struct rt9455_info *info,
+ bool *_is_battery_absent,
+ bool *_alert_userspace)
+{
+ unsigned int irq1, mask1, mask2;
+ struct device *dev = &info->client->dev;
+ bool is_battery_absent = false;
+ bool alert_userspace = false;
+ int ret;
+
+ ret = regmap_read(info->regmap, RT9455_REG_IRQ1, &irq1);
+ if (ret) {
+ dev_err(dev, "Failed to read IRQ1 register\n");
+ return ret;
+ }
+
+ ret = regmap_read(info->regmap, RT9455_REG_MASK1, &mask1);
+ if (ret) {
+ dev_err(dev, "Failed to read MASK1 register\n");
+ return ret;
+ }
+
+ if (irq1 & GET_MASK(F_TSDI)) {
+ dev_err(dev, "Thermal shutdown fault occurred\n");
+ alert_userspace = true;
+ }
+
+ if (irq1 & GET_MASK(F_VINOVPI)) {
+ dev_err(dev, "Overvoltage input occurred\n");
+ alert_userspace = true;
+ }
+
+ if (irq1 & GET_MASK(F_BATAB)) {
+ dev_err(dev, "Battery absence occurred\n");
+ is_battery_absent = true;
+ alert_userspace = true;
+
+ if ((mask1 & GET_MASK(F_BATABM)) == 0) {
+ ret = regmap_field_write(info->regmap_fields[F_BATABM],
+ 0x01);
+ if (ret) {
+ dev_err(dev, "Failed to mask BATAB interrupt\n");
+ return ret;
+ }
+ }
+
+ ret = regmap_read(info->regmap, RT9455_REG_MASK2, &mask2);
+ if (ret) {
+ dev_err(dev, "Failed to read MASK2 register\n");
+ return ret;
+ }
+
+ if (mask2 & GET_MASK(F_CHTERMIM)) {
+ ret = regmap_field_write(
+ info->regmap_fields[F_CHTERMIM], 0x00);
+ if (ret) {
+ dev_err(dev, "Failed to unmask CHTERMI interrupt\n");
+ return ret;
+ }
+ }
+
+ if (mask2 & GET_MASK(F_CHRCHGIM)) {
+ ret = regmap_field_write(
+ info->regmap_fields[F_CHRCHGIM], 0x00);
+ if (ret) {
+ dev_err(dev, "Failed to unmask CHRCHGI interrupt\n");
+ return ret;
+ }
+ }
+
+ /*
+ * When the battery is absent, max_charging_time_work is
+ * cancelled, since no charging is done.
+ */
+ cancel_delayed_work_sync(&info->max_charging_time_work);
+ /*
+ * Since no interrupt is triggered when the battery is
+ * reconnected, max_charging_time_work is not rescheduled.
+ * Therefore, batt_presence_work is scheduled to check whether
+ * the battery is still absent or not.
+ */
+ queue_delayed_work(system_power_efficient_wq,
+ &info->batt_presence_work,
+ RT9455_BATT_PRESENCE_DELAY * HZ);
+ }
+
+ *_is_battery_absent = is_battery_absent;
+
+ if (alert_userspace)
+ *_alert_userspace = alert_userspace;
+
+ return 0;
+}
+
+static int rt9455_irq_handler_check_irq2_register(struct rt9455_info *info,
+ bool is_battery_absent,
+ bool *_alert_userspace)
+{
+ unsigned int irq2, mask2;
+ struct device *dev = &info->client->dev;
+ bool alert_userspace = false;
+ int ret;
+
+ ret = regmap_read(info->regmap, RT9455_REG_IRQ2, &irq2);
+ if (ret) {
+ dev_err(dev, "Failed to read IRQ2 register\n");
+ return ret;
+ }
+
+ ret = regmap_read(info->regmap, RT9455_REG_MASK2, &mask2);
+ if (ret) {
+ dev_err(dev, "Failed to read MASK2 register\n");
+ return ret;
+ }
+
+ if (irq2 & GET_MASK(F_CHRVPI)) {
+ dev_dbg(dev, "Charger fault occurred\n");
+ /*
+ * CHRVPI bit is set in 2 cases:
+ * 1. when the power source is connected to the charger.
+ * 2. when the power source is disconnected from the charger.
+ * To identify the case, PWR_RDY bit is checked. Because
+ * PWR_RDY bit is set / cleared after CHRVPI interrupt is
+ * triggered, it is used delayed_work to later read PWR_RDY bit.
+ * Also, do not set to true alert_userspace, because there is no
+ * need to notify userspace when CHRVPI interrupt has occurred.
+ * Userspace will be notified after PWR_RDY bit is read.
+ */
+ queue_delayed_work(system_power_efficient_wq,
+ &info->pwr_rdy_work,
+ RT9455_PWR_RDY_DELAY * HZ);
+ }
+ if (irq2 & GET_MASK(F_CHBATOVI)) {
+ dev_err(dev, "Battery OVP occurred\n");
+ alert_userspace = true;
+ }
+ if (irq2 & GET_MASK(F_CHTERMI)) {
+ dev_dbg(dev, "Charge terminated\n");
+ if (!is_battery_absent) {
+ if ((mask2 & GET_MASK(F_CHTERMIM)) == 0) {
+ ret = regmap_field_write(
+ info->regmap_fields[F_CHTERMIM], 0x01);
+ if (ret) {
+ dev_err(dev, "Failed to mask CHTERMI interrupt\n");
+ return ret;
+ }
+ /*
+ * Update MASK2 value, since CHTERMIM bit is
+ * set.
+ */
+ mask2 = mask2 | GET_MASK(F_CHTERMIM);
+ }
+ cancel_delayed_work_sync(&info->max_charging_time_work);
+ alert_userspace = true;
+ }
+ }
+ if (irq2 & GET_MASK(F_CHRCHGI)) {
+ dev_dbg(dev, "Recharge request\n");
+ ret = regmap_field_write(info->regmap_fields[F_CHG_EN],
+ RT9455_CHARGE_ENABLE);
+ if (ret) {
+ dev_err(dev, "Failed to enable charging\n");
+ return ret;
+ }
+ if (mask2 & GET_MASK(F_CHTERMIM)) {
+ ret = regmap_field_write(
+ info->regmap_fields[F_CHTERMIM], 0x00);
+ if (ret) {
+ dev_err(dev, "Failed to unmask CHTERMI interrupt\n");
+ return ret;
+ }
+ /* Update MASK2 value, since CHTERMIM bit is cleared. */
+ mask2 = mask2 & ~GET_MASK(F_CHTERMIM);
+ }
+ if (!is_battery_absent) {
+ /*
+ * No need to check whether the charger is connected to
+ * power source when CHRCHGI is received, since CHRCHGI
+ * is not triggered if the charger is not connected to
+ * the power source.
+ */
+ queue_delayed_work(system_power_efficient_wq,
+ &info->max_charging_time_work,
+ RT9455_MAX_CHARGING_TIME * HZ);
+ alert_userspace = true;
+ }
+ }
+ if (irq2 & GET_MASK(F_CH32MI)) {
+ dev_err(dev, "Charger fault. 32 mins timeout occurred\n");
+ alert_userspace = true;
+ }
+ if (irq2 & GET_MASK(F_CHTREGI)) {
+ dev_warn(dev,
+ "Charger warning. Thermal regulation loop active\n");
+ alert_userspace = true;
+ }
+ if (irq2 & GET_MASK(F_CHMIVRI)) {
+ dev_dbg(dev,
+ "Charger warning. Input voltage MIVR loop active\n");
+ }
+
+ if (alert_userspace)
+ *_alert_userspace = alert_userspace;
+
+ return 0;
+}
+
+static int rt9455_irq_handler_check_irq3_register(struct rt9455_info *info,
+ bool *_alert_userspace)
+{
+ unsigned int irq3, mask3;
+ struct device *dev = &info->client->dev;
+ bool alert_userspace = false;
+ int ret;
+
+ ret = regmap_read(info->regmap, RT9455_REG_IRQ3, &irq3);
+ if (ret) {
+ dev_err(dev, "Failed to read IRQ3 register\n");
+ return ret;
+ }
+
+ ret = regmap_read(info->regmap, RT9455_REG_MASK3, &mask3);
+ if (ret) {
+ dev_err(dev, "Failed to read MASK3 register\n");
+ return ret;
+ }
+
+ if (irq3 & GET_MASK(F_BSTBUSOVI)) {
+ dev_err(dev, "Boost fault. Overvoltage input occurred\n");
+ alert_userspace = true;
+ }
+ if (irq3 & GET_MASK(F_BSTOLI)) {
+ dev_err(dev, "Boost fault. Overload\n");
+ alert_userspace = true;
+ }
+ if (irq3 & GET_MASK(F_BSTLOWVI)) {
+ dev_err(dev, "Boost fault. Battery voltage too low\n");
+ alert_userspace = true;
+ }
+ if (irq3 & GET_MASK(F_BST32SI)) {
+ dev_err(dev, "Boost fault. 32 seconds timeout occurred.\n");
+ alert_userspace = true;
+ }
+
+ if (alert_userspace) {
+ dev_info(dev, "Boost fault occurred, therefore the charger goes into charge mode\n");
+ ret = rt9455_set_voreg_before_charge_mode(info);
+ if (ret) {
+ dev_err(dev, "Failed to set VOREG before entering charge mode\n");
+ return ret;
+ }
+ ret = regmap_field_write(info->regmap_fields[F_OPA_MODE],
+ RT9455_CHARGE_MODE);
+ if (ret) {
+ dev_err(dev, "Failed to set charger in charge mode\n");
+ return ret;
+ }
+ *_alert_userspace = alert_userspace;
+ }
+
+ return 0;
+}
+
+static irqreturn_t rt9455_irq_handler_thread(int irq, void *data)
+{
+ struct rt9455_info *info = data;
+ struct device *dev;
+ bool alert_userspace = false;
+ bool is_battery_absent = false;
+ unsigned int status;
+ int ret;
+
+ if (!info)
+ return IRQ_NONE;
+
+ dev = &info->client->dev;
+
+ if (irq != info->client->irq) {
+ dev_err(dev, "Interrupt is not for RT9455 charger\n");
+ return IRQ_NONE;
+ }
+
+ ret = regmap_field_read(info->regmap_fields[F_STAT], &status);
+ if (ret) {
+ dev_err(dev, "Failed to read STAT bits\n");
+ return IRQ_HANDLED;
+ }
+ dev_dbg(dev, "Charger status is %d\n", status);
+
+ /*
+ * Each function that processes an IRQ register receives as output
+ * parameter alert_userspace pointer. alert_userspace is set to true
+ * in such a function only if an interrupt has occurred in the
+ * respective interrupt register. This way, it is avoided the following
+ * case: interrupt occurs only in IRQ1 register,
+ * rt9455_irq_handler_check_irq1_register() function sets to true
+ * alert_userspace, but rt9455_irq_handler_check_irq2_register()
+ * and rt9455_irq_handler_check_irq3_register() functions set to false
+ * alert_userspace and power_supply_changed() is never called.
+ */
+ ret = rt9455_irq_handler_check_irq1_register(info, &is_battery_absent,
+ &alert_userspace);
+ if (ret) {
+ dev_err(dev, "Failed to handle IRQ1 register\n");
+ return IRQ_HANDLED;
+ }
+
+ ret = rt9455_irq_handler_check_irq2_register(info, is_battery_absent,
+ &alert_userspace);
+ if (ret) {
+ dev_err(dev, "Failed to handle IRQ2 register\n");
+ return IRQ_HANDLED;
+ }
+
+ ret = rt9455_irq_handler_check_irq3_register(info, &alert_userspace);
+ if (ret) {
+ dev_err(dev, "Failed to handle IRQ3 register\n");
+ return IRQ_HANDLED;
+ }
+
+ if (alert_userspace) {
+ /*
+ * Sometimes, an interrupt occurs while rt9455_probe() function
+ * is executing and power_supply_register() is not yet called.
+ * Do not call power_supply_changed() in this case.
+ */
+ if (info->charger)
+ power_supply_changed(info->charger);
+ }
+
+ return IRQ_HANDLED;
+}
+
+static int rt9455_discover_charger(struct rt9455_info *info, u32 *ichrg,
+ u32 *ieoc_percentage,
+ u32 *mivr, u32 *iaicr)
+{
+ struct device *dev = &info->client->dev;
+ int ret;
+
+ if (!dev->of_node && !ACPI_HANDLE(dev)) {
+ dev_err(dev, "No support for either device tree or ACPI\n");
+ return -EINVAL;
+ }
+ /*
+ * ICHRG, IEOC_PERCENTAGE, VOREG and boost output voltage are mandatory
+ * parameters.
+ */
+ ret = device_property_read_u32(dev, "richtek,output-charge-current",
+ ichrg);
+ if (ret) {
+ dev_err(dev, "Error: missing \"output-charge-current\" property\n");
+ return ret;
+ }
+
+ ret = device_property_read_u32(dev, "richtek,end-of-charge-percentage",
+ ieoc_percentage);
+ if (ret) {
+ dev_err(dev, "Error: missing \"end-of-charge-percentage\" property\n");
+ return ret;
+ }
+
+ ret = device_property_read_u32(dev,
+ "richtek,battery-regulation-voltage",
+ &info->voreg);
+ if (ret) {
+ dev_err(dev, "Error: missing \"battery-regulation-voltage\" property\n");
+ return ret;
+ }
+
+ ret = device_property_read_u32(dev, "richtek,boost-output-voltage",
+ &info->boost_voltage);
+ if (ret) {
+ dev_err(dev, "Error: missing \"boost-output-voltage\" property\n");
+ return ret;
+ }
+
+ /*
+ * MIVR and IAICR are optional parameters. Do not return error if one of
+ * them is not present in ACPI table or device tree specification.
+ */
+ device_property_read_u32(dev, "richtek,min-input-voltage-regulation",
+ mivr);
+ device_property_read_u32(dev, "richtek,avg-input-current-regulation",
+ iaicr);
+
+ return 0;
+}
+
+#if IS_ENABLED(CONFIG_USB_PHY)
+static int rt9455_usb_event_none(struct rt9455_info *info,
+ u8 opa_mode, u8 iaicr)
+{
+ struct device *dev = &info->client->dev;
+ int ret;
+
+ if (opa_mode == RT9455_BOOST_MODE) {
+ ret = rt9455_set_voreg_before_charge_mode(info);
+ if (ret) {
+ dev_err(dev, "Failed to set VOREG before entering charge mode\n");
+ return ret;
+ }
+ /*
+ * If the charger is in boost mode, and it has received
+ * USB_EVENT_NONE, this means the consumer device powered by the
+ * charger is not connected anymore.
+ * In this case, the charger goes into charge mode.
+ */
+ dev_dbg(dev, "USB_EVENT_NONE received, therefore the charger goes into charge mode\n");
+ ret = regmap_field_write(info->regmap_fields[F_OPA_MODE],
+ RT9455_CHARGE_MODE);
+ if (ret) {
+ dev_err(dev, "Failed to set charger in charge mode\n");
+ return NOTIFY_DONE;
+ }
+ }
+
+ dev_dbg(dev, "USB_EVENT_NONE received, therefore IAICR is set to its minimum value\n");
+ if (iaicr != RT9455_IAICR_100MA) {
+ ret = regmap_field_write(info->regmap_fields[F_IAICR],
+ RT9455_IAICR_100MA);
+ if (ret) {
+ dev_err(dev, "Failed to set IAICR value\n");
+ return NOTIFY_DONE;
+ }
+ }
+
+ return NOTIFY_OK;
+}
+
+static int rt9455_usb_event_vbus(struct rt9455_info *info,
+ u8 opa_mode, u8 iaicr)
+{
+ struct device *dev = &info->client->dev;
+ int ret;
+
+ if (opa_mode == RT9455_BOOST_MODE) {
+ ret = rt9455_set_voreg_before_charge_mode(info);
+ if (ret) {
+ dev_err(dev, "Failed to set VOREG before entering charge mode\n");
+ return ret;
+ }
+ /*
+ * If the charger is in boost mode, and it has received
+ * USB_EVENT_VBUS, this means the consumer device powered by the
+ * charger is not connected anymore.
+ * In this case, the charger goes into charge mode.
+ */
+ dev_dbg(dev, "USB_EVENT_VBUS received, therefore the charger goes into charge mode\n");
+ ret = regmap_field_write(info->regmap_fields[F_OPA_MODE],
+ RT9455_CHARGE_MODE);
+ if (ret) {
+ dev_err(dev, "Failed to set charger in charge mode\n");
+ return NOTIFY_DONE;
+ }
+ }
+
+ dev_dbg(dev, "USB_EVENT_VBUS received, therefore IAICR is set to 500 mA\n");
+ if (iaicr != RT9455_IAICR_500MA) {
+ ret = regmap_field_write(info->regmap_fields[F_IAICR],
+ RT9455_IAICR_500MA);
+ if (ret) {
+ dev_err(dev, "Failed to set IAICR value\n");
+ return NOTIFY_DONE;
+ }
+ }
+
+ return NOTIFY_OK;
+}
+
+static int rt9455_usb_event_id(struct rt9455_info *info,
+ u8 opa_mode, u8 iaicr)
+{
+ struct device *dev = &info->client->dev;
+ int ret;
+
+ if (opa_mode == RT9455_CHARGE_MODE) {
+ ret = rt9455_set_boost_voltage_before_boost_mode(info);
+ if (ret) {
+ dev_err(dev, "Failed to set boost output voltage before entering boost mode\n");
+ return ret;
+ }
+ /*
+ * If the charger is in charge mode, and it has received
+ * USB_EVENT_ID, this means a consumer device is connected and
+ * it should be powered by the charger.
+ * In this case, the charger goes into boost mode.
+ */
+ dev_dbg(dev, "USB_EVENT_ID received, therefore the charger goes into boost mode\n");
+ ret = regmap_field_write(info->regmap_fields[F_OPA_MODE],
+ RT9455_BOOST_MODE);
+ if (ret) {
+ dev_err(dev, "Failed to set charger in boost mode\n");
+ return NOTIFY_DONE;
+ }
+ }
+
+ dev_dbg(dev, "USB_EVENT_ID received, therefore IAICR is set to its minimum value\n");
+ if (iaicr != RT9455_IAICR_100MA) {
+ ret = regmap_field_write(info->regmap_fields[F_IAICR],
+ RT9455_IAICR_100MA);
+ if (ret) {
+ dev_err(dev, "Failed to set IAICR value\n");
+ return NOTIFY_DONE;
+ }
+ }
+
+ return NOTIFY_OK;
+}
+
+static int rt9455_usb_event_charger(struct rt9455_info *info,
+ u8 opa_mode, u8 iaicr)
+{
+ struct device *dev = &info->client->dev;
+ int ret;
+
+ if (opa_mode == RT9455_BOOST_MODE) {
+ ret = rt9455_set_voreg_before_charge_mode(info);
+ if (ret) {
+ dev_err(dev, "Failed to set VOREG before entering charge mode\n");
+ return ret;
+ }
+ /*
+ * If the charger is in boost mode, and it has received
+ * USB_EVENT_CHARGER, this means the consumer device powered by
+ * the charger is not connected anymore.
+ * In this case, the charger goes into charge mode.
+ */
+ dev_dbg(dev, "USB_EVENT_CHARGER received, therefore the charger goes into charge mode\n");
+ ret = regmap_field_write(info->regmap_fields[F_OPA_MODE],
+ RT9455_CHARGE_MODE);
+ if (ret) {
+ dev_err(dev, "Failed to set charger in charge mode\n");
+ return NOTIFY_DONE;
+ }
+ }
+
+ dev_dbg(dev, "USB_EVENT_CHARGER received, therefore IAICR is set to no current limit\n");
+ if (iaicr != RT9455_IAICR_NO_LIMIT) {
+ ret = regmap_field_write(info->regmap_fields[F_IAICR],
+ RT9455_IAICR_NO_LIMIT);
+ if (ret) {
+ dev_err(dev, "Failed to set IAICR value\n");
+ return NOTIFY_DONE;
+ }
+ }
+
+ return NOTIFY_OK;
+}
+
+static int rt9455_usb_event(struct notifier_block *nb,
+ unsigned long event, void *power)
+{
+ struct rt9455_info *info = container_of(nb, struct rt9455_info, nb);
+ struct device *dev = &info->client->dev;
+ unsigned int opa_mode, iaicr;
+ int ret;
+
+ /*
+ * Determine whether the charger is in charge mode
+ * or in boost mode.
+ */
+ ret = regmap_field_read(info->regmap_fields[F_OPA_MODE],
+ &opa_mode);
+ if (ret) {
+ dev_err(dev, "Failed to read OPA_MODE value\n");
+ return NOTIFY_DONE;
+ }
+
+ ret = regmap_field_read(info->regmap_fields[F_IAICR],
+ &iaicr);
+ if (ret) {
+ dev_err(dev, "Failed to read IAICR value\n");
+ return NOTIFY_DONE;
+ }
+
+ dev_dbg(dev, "Received USB event %lu\n", event);
+ switch (event) {
+ case USB_EVENT_NONE:
+ return rt9455_usb_event_none(info, opa_mode, iaicr);
+ case USB_EVENT_VBUS:
+ return rt9455_usb_event_vbus(info, opa_mode, iaicr);
+ case USB_EVENT_ID:
+ return rt9455_usb_event_id(info, opa_mode, iaicr);
+ case USB_EVENT_CHARGER:
+ return rt9455_usb_event_charger(info, opa_mode, iaicr);
+ default:
+ dev_err(dev, "Unknown USB event\n");
+ }
+ return NOTIFY_DONE;
+}
+#endif
+
+static void rt9455_pwr_rdy_work_callback(struct work_struct *work)
+{
+ struct rt9455_info *info = container_of(work, struct rt9455_info,
+ pwr_rdy_work.work);
+ struct device *dev = &info->client->dev;
+ unsigned int pwr_rdy;
+ int ret;
+
+ ret = regmap_field_read(info->regmap_fields[F_PWR_RDY], &pwr_rdy);
+ if (ret) {
+ dev_err(dev, "Failed to read PWR_RDY bit\n");
+ return;
+ }
+ switch (pwr_rdy) {
+ case RT9455_PWR_FAULT:
+ dev_dbg(dev, "Charger disconnected from power source\n");
+ cancel_delayed_work_sync(&info->max_charging_time_work);
+ break;
+ case RT9455_PWR_GOOD:
+ dev_dbg(dev, "Charger connected to power source\n");
+ ret = regmap_field_write(info->regmap_fields[F_CHG_EN],
+ RT9455_CHARGE_ENABLE);
+ if (ret) {
+ dev_err(dev, "Failed to enable charging\n");
+ return;
+ }
+ queue_delayed_work(system_power_efficient_wq,
+ &info->max_charging_time_work,
+ RT9455_MAX_CHARGING_TIME * HZ);
+ break;
+ }
+ /*
+ * Notify userspace that the charger has been either connected to or
+ * disconnected from the power source.
+ */
+ power_supply_changed(info->charger);
+}
+
+static void rt9455_max_charging_time_work_callback(struct work_struct *work)
+{
+ struct rt9455_info *info = container_of(work, struct rt9455_info,
+ max_charging_time_work.work);
+ struct device *dev = &info->client->dev;
+ int ret;
+
+ dev_err(dev, "Battery has been charging for at least 6 hours and is not yet fully charged. Battery is dead, therefore charging is disabled.\n");
+ ret = regmap_field_write(info->regmap_fields[F_CHG_EN],
+ RT9455_CHARGE_DISABLE);
+ if (ret)
+ dev_err(dev, "Failed to disable charging\n");
+}
+
+static void rt9455_batt_presence_work_callback(struct work_struct *work)
+{
+ struct rt9455_info *info = container_of(work, struct rt9455_info,
+ batt_presence_work.work);
+ struct device *dev = &info->client->dev;
+ unsigned int irq1, mask1;
+ int ret;
+
+ ret = regmap_read(info->regmap, RT9455_REG_IRQ1, &irq1);
+ if (ret) {
+ dev_err(dev, "Failed to read IRQ1 register\n");
+ return;
+ }
+
+ /*
+ * If the battery is still absent, batt_presence_work is rescheduled.
+ * Otherwise, max_charging_time is scheduled.
+ */
+ if (irq1 & GET_MASK(F_BATAB)) {
+ queue_delayed_work(system_power_efficient_wq,
+ &info->batt_presence_work,
+ RT9455_BATT_PRESENCE_DELAY * HZ);
+ } else {
+ queue_delayed_work(system_power_efficient_wq,
+ &info->max_charging_time_work,
+ RT9455_MAX_CHARGING_TIME * HZ);
+
+ ret = regmap_read(info->regmap, RT9455_REG_MASK1, &mask1);
+ if (ret) {
+ dev_err(dev, "Failed to read MASK1 register\n");
+ return;
+ }
+
+ if (mask1 & GET_MASK(F_BATABM)) {
+ ret = regmap_field_write(info->regmap_fields[F_BATABM],
+ 0x00);
+ if (ret)
+ dev_err(dev, "Failed to unmask BATAB interrupt\n");
+ }
+ /*
+ * Notify userspace that the battery is now connected to the
+ * charger.
+ */
+ power_supply_changed(info->charger);
+ }
+}
+
+static const struct power_supply_desc rt9455_charger_desc = {
+ .name = RT9455_DRIVER_NAME,
+ .type = POWER_SUPPLY_TYPE_USB,
+ .properties = rt9455_charger_properties,
+ .num_properties = ARRAY_SIZE(rt9455_charger_properties),
+ .get_property = rt9455_charger_get_property,
+};
+
+static bool rt9455_is_writeable_reg(struct device *dev, unsigned int reg)
+{
+ switch (reg) {
+ case RT9455_REG_DEV_ID:
+ case RT9455_REG_IRQ1:
+ case RT9455_REG_IRQ2:
+ case RT9455_REG_IRQ3:
+ return false;
+ default:
+ return true;
+ }
+}
+
+static bool rt9455_is_volatile_reg(struct device *dev, unsigned int reg)
+{
+ switch (reg) {
+ case RT9455_REG_DEV_ID:
+ case RT9455_REG_CTRL5:
+ case RT9455_REG_CTRL6:
+ return false;
+ default:
+ return true;
+ }
+}
+
+static const struct regmap_config rt9455_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+ .writeable_reg = rt9455_is_writeable_reg,
+ .volatile_reg = rt9455_is_volatile_reg,
+ .max_register = RT9455_REG_MASK3,
+ .cache_type = REGCACHE_RBTREE,
+};
+
+static int rt9455_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct i2c_adapter *adapter = client->adapter;
+ struct device *dev = &client->dev;
+ struct rt9455_info *info;
+ struct power_supply_config rt9455_charger_config = {};
+ /*
+ * Mandatory device-specific data values. Also, VOREG and boost output
+ * voltage are mandatory values, but they are stored in rt9455_info
+ * structure.
+ */
+ u32 ichrg, ieoc_percentage;
+ /* Optional device-specific data values. */
+ u32 mivr = -1, iaicr = -1;
+ int i, ret;
+
+ if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) {
+ dev_err(dev, "No support for SMBUS_BYTE_DATA\n");
+ return -ENODEV;
+ }
+ info = devm_kzalloc(dev, sizeof(*info), GFP_KERNEL);
+ if (!info)
+ return -ENOMEM;
+
+ info->client = client;
+ i2c_set_clientdata(client, info);
+
+ info->regmap = devm_regmap_init_i2c(client,
+ &rt9455_regmap_config);
+ if (IS_ERR(info->regmap)) {
+ dev_err(dev, "Failed to initialize register map\n");
+ return -EINVAL;
+ }
+
+ for (i = 0; i < F_MAX_FIELDS; i++) {
+ info->regmap_fields[i] =
+ devm_regmap_field_alloc(dev, info->regmap,
+ rt9455_reg_fields[i]);
+ if (IS_ERR(info->regmap_fields[i])) {
+ dev_err(dev,
+ "Failed to allocate regmap field = %d\n", i);
+ return PTR_ERR(info->regmap_fields[i]);
+ }
+ }
+
+ ret = rt9455_discover_charger(info, &ichrg, &ieoc_percentage,
+ &mivr, &iaicr);
+ if (ret) {
+ dev_err(dev, "Failed to discover charger\n");
+ return ret;
+ }
+
+#if IS_ENABLED(CONFIG_USB_PHY)
+ info->usb_phy = devm_usb_get_phy(dev, USB_PHY_TYPE_USB2);
+ if (IS_ERR(info->usb_phy)) {
+ dev_err(dev, "Failed to get USB transceiver\n");
+ } else {
+ info->nb.notifier_call = rt9455_usb_event;
+ ret = usb_register_notifier(info->usb_phy, &info->nb);
+ if (ret) {
+ dev_err(dev, "Failed to register USB notifier\n");
+ /*
+ * If usb_register_notifier() fails, set notifier_call
+ * to NULL, to avoid calling usb_unregister_notifier().
+ */
+ info->nb.notifier_call = NULL;
+ }
+ }
+#endif
+
+ INIT_DEFERRABLE_WORK(&info->pwr_rdy_work, rt9455_pwr_rdy_work_callback);
+ INIT_DEFERRABLE_WORK(&info->max_charging_time_work,
+ rt9455_max_charging_time_work_callback);
+ INIT_DEFERRABLE_WORK(&info->batt_presence_work,
+ rt9455_batt_presence_work_callback);
+
+ rt9455_charger_config.of_node = dev->of_node;
+ rt9455_charger_config.drv_data = info;
+ rt9455_charger_config.supplied_to = rt9455_charger_supplied_to;
+ rt9455_charger_config.num_supplicants =
+ ARRAY_SIZE(rt9455_charger_supplied_to);
+ ret = devm_request_threaded_irq(dev, client->irq, NULL,
+ rt9455_irq_handler_thread,
+ IRQF_TRIGGER_LOW | IRQF_ONESHOT,
+ RT9455_DRIVER_NAME, info);
+ if (ret) {
+ dev_err(dev, "Failed to register IRQ handler\n");
+ goto put_usb_notifier;
+ }
+
+ ret = rt9455_hw_init(info, ichrg, ieoc_percentage, mivr, iaicr);
+ if (ret) {
+ dev_err(dev, "Failed to set charger to its default values\n");
+ goto put_usb_notifier;
+ }
+
+ info->charger = devm_power_supply_register(dev, &rt9455_charger_desc,
+ &rt9455_charger_config);
+ if (IS_ERR(info->charger)) {
+ dev_err(dev, "Failed to register charger\n");
+ ret = PTR_ERR(info->charger);
+ goto put_usb_notifier;
+ }
+
+ return 0;
+
+put_usb_notifier:
+#if IS_ENABLED(CONFIG_USB_PHY)
+ if (info->nb.notifier_call) {
+ usb_unregister_notifier(info->usb_phy, &info->nb);
+ info->nb.notifier_call = NULL;
+ }
+#endif
+ return ret;
+}
+
+static int rt9455_remove(struct i2c_client *client)
+{
+ int ret;
+ struct rt9455_info *info = i2c_get_clientdata(client);
+
+ ret = rt9455_register_reset(info);
+ if (ret)
+ dev_err(&info->client->dev, "Failed to set charger to its default values\n");
+
+#if IS_ENABLED(CONFIG_USB_PHY)
+ if (info->nb.notifier_call)
+ usb_unregister_notifier(info->usb_phy, &info->nb);
+#endif
+
+ cancel_delayed_work_sync(&info->pwr_rdy_work);
+ cancel_delayed_work_sync(&info->max_charging_time_work);
+ cancel_delayed_work_sync(&info->batt_presence_work);
+
+ return ret;
+}
+
+static const struct i2c_device_id rt9455_i2c_id_table[] = {
+ { RT9455_DRIVER_NAME, 0 },
+ { },
+};
+MODULE_DEVICE_TABLE(i2c, rt9455_i2c_id_table);
+
+static const struct of_device_id rt9455_of_match[] = {
+ { .compatible = "richtek,rt9455", },
+ { },
+};
+MODULE_DEVICE_TABLE(of, rt9455_of_match);
+
+#ifdef CONFIG_ACPI
+static const struct acpi_device_id rt9455_i2c_acpi_match[] = {
+ { "RT945500", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(acpi, rt9455_i2c_acpi_match);
+#endif
+
+static struct i2c_driver rt9455_driver = {
+ .probe = rt9455_probe,
+ .remove = rt9455_remove,
+ .id_table = rt9455_i2c_id_table,
+ .driver = {
+ .name = RT9455_DRIVER_NAME,
+ .of_match_table = of_match_ptr(rt9455_of_match),
+ .acpi_match_table = ACPI_PTR(rt9455_i2c_acpi_match),
+ },
+};
+module_i2c_driver(rt9455_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Anda-Maria Nicolae <anda-maria.nicolae@intel.com>");
+MODULE_DESCRIPTION("Richtek RT9455 Charger Driver");
diff --git a/drivers/power/supply/rx51_battery.c b/drivers/power/supply/rx51_battery.c
new file mode 100644
index 000000000..6e488ecf4
--- /dev/null
+++ b/drivers/power/supply/rx51_battery.c
@@ -0,0 +1,283 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Nokia RX-51 battery driver
+ *
+ * Copyright (C) 2012 Pali Rohár <pali@kernel.org>
+ */
+
+#include <linux/module.h>
+#include <linux/param.h>
+#include <linux/platform_device.h>
+#include <linux/power_supply.h>
+#include <linux/slab.h>
+#include <linux/iio/consumer.h>
+#include <linux/of.h>
+
+struct rx51_device_info {
+ struct device *dev;
+ struct power_supply *bat;
+ struct power_supply_desc bat_desc;
+ struct iio_channel *channel_temp;
+ struct iio_channel *channel_bsi;
+ struct iio_channel *channel_vbat;
+};
+
+/*
+ * Read ADCIN channel value, code copied from maemo kernel
+ */
+static int rx51_battery_read_adc(struct iio_channel *channel)
+{
+ int val, err;
+ err = iio_read_channel_average_raw(channel, &val);
+ if (err < 0)
+ return err;
+ return val;
+}
+
+/*
+ * Read ADCIN channel 12 (voltage) and convert RAW value to micro voltage
+ * This conversion formula was extracted from maemo program bsi-read
+ */
+static int rx51_battery_read_voltage(struct rx51_device_info *di)
+{
+ int voltage = rx51_battery_read_adc(di->channel_vbat);
+
+ if (voltage < 0) {
+ dev_err(di->dev, "Could not read ADC: %d\n", voltage);
+ return voltage;
+ }
+
+ return 1000 * (10000 * voltage / 1705);
+}
+
+/*
+ * Temperature look-up tables
+ * TEMP = (1/(t1 + 1/298) - 273.15)
+ * Where t1 = (1/B) * ln((RAW_ADC_U * 2.5)/(R * I * 255))
+ * Formula is based on experimental data, RX-51 CAL data, maemo program bme
+ * and formula from da9052 driver with values R = 100, B = 3380, I = 0.00671
+ */
+
+/*
+ * Table1 (temperature for first 25 RAW values)
+ * Usage: TEMP = rx51_temp_table1[RAW]
+ * RAW is between 1 and 24
+ * TEMP is between 201 C and 55 C
+ */
+static u8 rx51_temp_table1[] = {
+ 255, 201, 159, 138, 124, 114, 106, 99, 94, 89, 85, 82, 78, 75,
+ 73, 70, 68, 66, 64, 62, 61, 59, 57, 56, 55
+};
+
+/*
+ * Table2 (lowest RAW value for temperature)
+ * Usage: RAW = rx51_temp_table2[TEMP-rx51_temp_table2_first]
+ * TEMP is between 53 C and -32 C
+ * RAW is between 25 and 993
+ */
+#define rx51_temp_table2_first 53
+static u16 rx51_temp_table2[] = {
+ 25, 26, 27, 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 39,
+ 40, 41, 43, 44, 46, 48, 49, 51, 53, 55, 57, 59, 61, 64,
+ 66, 69, 71, 74, 77, 80, 83, 86, 90, 94, 97, 101, 106, 110,
+ 115, 119, 125, 130, 136, 141, 148, 154, 161, 168, 176, 184, 202, 211,
+ 221, 231, 242, 254, 266, 279, 293, 308, 323, 340, 357, 375, 395, 415,
+ 437, 460, 485, 511, 539, 568, 600, 633, 669, 706, 747, 790, 836, 885,
+ 937, 993, 1024
+};
+
+/*
+ * Read ADCIN channel 0 (battery temp) and convert value to tenths of Celsius
+ * Use Temperature look-up tables for conversation
+ */
+static int rx51_battery_read_temperature(struct rx51_device_info *di)
+{
+ int min = 0;
+ int max = ARRAY_SIZE(rx51_temp_table2) - 1;
+ int raw = rx51_battery_read_adc(di->channel_temp);
+
+ if (raw < 0)
+ dev_err(di->dev, "Could not read ADC: %d\n", raw);
+
+ /* Zero and negative values are undefined */
+ if (raw <= 0)
+ return INT_MAX;
+
+ /* ADC channels are 10 bit, higher value are undefined */
+ if (raw >= (1 << 10))
+ return INT_MIN;
+
+ /* First check for temperature in first direct table */
+ if (raw < ARRAY_SIZE(rx51_temp_table1))
+ return rx51_temp_table1[raw] * 10;
+
+ /* Binary search RAW value in second inverse table */
+ while (max - min > 1) {
+ int mid = (max + min) / 2;
+ if (rx51_temp_table2[mid] <= raw)
+ min = mid;
+ else if (rx51_temp_table2[mid] > raw)
+ max = mid;
+ if (rx51_temp_table2[mid] == raw)
+ break;
+ }
+
+ return (rx51_temp_table2_first - min) * 10;
+}
+
+/*
+ * Read ADCIN channel 4 (BSI) and convert RAW value to micro Ah
+ * This conversion formula was extracted from maemo program bsi-read
+ */
+static int rx51_battery_read_capacity(struct rx51_device_info *di)
+{
+ int capacity = rx51_battery_read_adc(di->channel_bsi);
+
+ if (capacity < 0) {
+ dev_err(di->dev, "Could not read ADC: %d\n", capacity);
+ return capacity;
+ }
+
+ return 1280 * (1200 * capacity)/(1024 - capacity);
+}
+
+/*
+ * Return power_supply property
+ */
+static int rx51_battery_get_property(struct power_supply *psy,
+ enum power_supply_property psp,
+ union power_supply_propval *val)
+{
+ struct rx51_device_info *di = power_supply_get_drvdata(psy);
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_TECHNOLOGY:
+ val->intval = POWER_SUPPLY_TECHNOLOGY_LION;
+ break;
+ case POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN:
+ val->intval = 4200000;
+ break;
+ case POWER_SUPPLY_PROP_PRESENT:
+ val->intval = rx51_battery_read_voltage(di) ? 1 : 0;
+ break;
+ case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+ val->intval = rx51_battery_read_voltage(di);
+ break;
+ case POWER_SUPPLY_PROP_TEMP:
+ val->intval = rx51_battery_read_temperature(di);
+ break;
+ case POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN:
+ val->intval = rx51_battery_read_capacity(di);
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ if (val->intval == INT_MAX || val->intval == INT_MIN)
+ return -EINVAL;
+
+ return 0;
+}
+
+static enum power_supply_property rx51_battery_props[] = {
+ POWER_SUPPLY_PROP_TECHNOLOGY,
+ POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN,
+ POWER_SUPPLY_PROP_PRESENT,
+ POWER_SUPPLY_PROP_VOLTAGE_NOW,
+ POWER_SUPPLY_PROP_TEMP,
+ POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN,
+};
+
+static int rx51_battery_probe(struct platform_device *pdev)
+{
+ struct power_supply_config psy_cfg = {};
+ struct rx51_device_info *di;
+ int ret;
+
+ di = devm_kzalloc(&pdev->dev, sizeof(*di), GFP_KERNEL);
+ if (!di)
+ return -ENOMEM;
+
+ platform_set_drvdata(pdev, di);
+
+ di->dev = &pdev->dev;
+ di->bat_desc.name = "rx51-battery";
+ di->bat_desc.type = POWER_SUPPLY_TYPE_BATTERY;
+ di->bat_desc.properties = rx51_battery_props;
+ di->bat_desc.num_properties = ARRAY_SIZE(rx51_battery_props);
+ di->bat_desc.get_property = rx51_battery_get_property;
+
+ psy_cfg.drv_data = di;
+
+ di->channel_temp = iio_channel_get(di->dev, "temp");
+ if (IS_ERR(di->channel_temp)) {
+ ret = PTR_ERR(di->channel_temp);
+ goto error;
+ }
+
+ di->channel_bsi = iio_channel_get(di->dev, "bsi");
+ if (IS_ERR(di->channel_bsi)) {
+ ret = PTR_ERR(di->channel_bsi);
+ goto error_channel_temp;
+ }
+
+ di->channel_vbat = iio_channel_get(di->dev, "vbat");
+ if (IS_ERR(di->channel_vbat)) {
+ ret = PTR_ERR(di->channel_vbat);
+ goto error_channel_bsi;
+ }
+
+ di->bat = power_supply_register(di->dev, &di->bat_desc, &psy_cfg);
+ if (IS_ERR(di->bat)) {
+ ret = PTR_ERR(di->bat);
+ goto error_channel_vbat;
+ }
+
+ return 0;
+
+error_channel_vbat:
+ iio_channel_release(di->channel_vbat);
+error_channel_bsi:
+ iio_channel_release(di->channel_bsi);
+error_channel_temp:
+ iio_channel_release(di->channel_temp);
+error:
+
+ return ret;
+}
+
+static int rx51_battery_remove(struct platform_device *pdev)
+{
+ struct rx51_device_info *di = platform_get_drvdata(pdev);
+
+ power_supply_unregister(di->bat);
+
+ iio_channel_release(di->channel_vbat);
+ iio_channel_release(di->channel_bsi);
+ iio_channel_release(di->channel_temp);
+
+ return 0;
+}
+
+#ifdef CONFIG_OF
+static const struct of_device_id n900_battery_of_match[] = {
+ {.compatible = "nokia,n900-battery", },
+ { },
+};
+MODULE_DEVICE_TABLE(of, n900_battery_of_match);
+#endif
+
+static struct platform_driver rx51_battery_driver = {
+ .probe = rx51_battery_probe,
+ .remove = rx51_battery_remove,
+ .driver = {
+ .name = "rx51-battery",
+ .of_match_table = of_match_ptr(n900_battery_of_match),
+ },
+};
+module_platform_driver(rx51_battery_driver);
+
+MODULE_ALIAS("platform:rx51-battery");
+MODULE_AUTHOR("Pali Rohár <pali@kernel.org>");
+MODULE_DESCRIPTION("Nokia RX-51 battery driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/power/supply/s3c_adc_battery.c b/drivers/power/supply/s3c_adc_battery.c
new file mode 100644
index 000000000..ff46bcf5d
--- /dev/null
+++ b/drivers/power/supply/s3c_adc_battery.c
@@ -0,0 +1,461 @@
+/*
+ * iPAQ h1930/h1940/rx1950 battery controller driver
+ * Copyright (c) Vasily Khoruzhick
+ * Based on h1940_battery.c by Arnaud Patard
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file COPYING in the main directory of this archive for
+ * more details.
+ *
+ */
+
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/power_supply.h>
+#include <linux/leds.h>
+#include <linux/gpio.h>
+#include <linux/err.h>
+#include <linux/timer.h>
+#include <linux/jiffies.h>
+#include <linux/s3c_adc_battery.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/module.h>
+
+#include <linux/soc/samsung/s3c-adc.h>
+
+#define BAT_POLL_INTERVAL 10000 /* ms */
+#define JITTER_DELAY 500 /* ms */
+
+struct s3c_adc_bat {
+ struct power_supply *psy;
+ struct s3c_adc_client *client;
+ struct s3c_adc_bat_pdata *pdata;
+ int volt_value;
+ int cur_value;
+ unsigned int timestamp;
+ int level;
+ int status;
+ int cable_plugged:1;
+};
+
+static struct delayed_work bat_work;
+
+static void s3c_adc_bat_ext_power_changed(struct power_supply *psy)
+{
+ schedule_delayed_work(&bat_work,
+ msecs_to_jiffies(JITTER_DELAY));
+}
+
+static int gather_samples(struct s3c_adc_client *client, int num, int channel)
+{
+ int value, i;
+
+ /* default to 1 if nothing is set */
+ if (num < 1)
+ num = 1;
+
+ value = 0;
+ for (i = 0; i < num; i++)
+ value += s3c_adc_read(client, channel);
+ value /= num;
+
+ return value;
+}
+
+static enum power_supply_property s3c_adc_backup_bat_props[] = {
+ POWER_SUPPLY_PROP_VOLTAGE_NOW,
+ POWER_SUPPLY_PROP_VOLTAGE_MIN,
+ POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN,
+};
+
+static int s3c_adc_backup_bat_get_property(struct power_supply *psy,
+ enum power_supply_property psp,
+ union power_supply_propval *val)
+{
+ struct s3c_adc_bat *bat = power_supply_get_drvdata(psy);
+
+ if (!bat) {
+ dev_err(&psy->dev, "%s: no battery infos ?!\n", __func__);
+ return -EINVAL;
+ }
+
+ if (bat->volt_value < 0 ||
+ jiffies_to_msecs(jiffies - bat->timestamp) >
+ BAT_POLL_INTERVAL) {
+ bat->volt_value = gather_samples(bat->client,
+ bat->pdata->backup_volt_samples,
+ bat->pdata->backup_volt_channel);
+ bat->volt_value *= bat->pdata->backup_volt_mult;
+ bat->timestamp = jiffies;
+ }
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+ val->intval = bat->volt_value;
+ return 0;
+ case POWER_SUPPLY_PROP_VOLTAGE_MIN:
+ val->intval = bat->pdata->backup_volt_min;
+ return 0;
+ case POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN:
+ val->intval = bat->pdata->backup_volt_max;
+ return 0;
+ default:
+ return -EINVAL;
+ }
+}
+
+static const struct power_supply_desc backup_bat_desc = {
+ .name = "backup-battery",
+ .type = POWER_SUPPLY_TYPE_BATTERY,
+ .properties = s3c_adc_backup_bat_props,
+ .num_properties = ARRAY_SIZE(s3c_adc_backup_bat_props),
+ .get_property = s3c_adc_backup_bat_get_property,
+ .use_for_apm = 1,
+};
+
+static struct s3c_adc_bat backup_bat;
+
+static enum power_supply_property s3c_adc_main_bat_props[] = {
+ POWER_SUPPLY_PROP_STATUS,
+ POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN,
+ POWER_SUPPLY_PROP_CHARGE_EMPTY_DESIGN,
+ POWER_SUPPLY_PROP_CHARGE_NOW,
+ POWER_SUPPLY_PROP_VOLTAGE_NOW,
+ POWER_SUPPLY_PROP_CURRENT_NOW,
+};
+
+static int calc_full_volt(int volt_val, int cur_val, int impedance)
+{
+ return volt_val + cur_val * impedance / 1000;
+}
+
+static int charge_finished(struct s3c_adc_bat *bat)
+{
+ return bat->pdata->gpio_inverted ?
+ !gpio_get_value(bat->pdata->gpio_charge_finished) :
+ gpio_get_value(bat->pdata->gpio_charge_finished);
+}
+
+static int s3c_adc_bat_get_property(struct power_supply *psy,
+ enum power_supply_property psp,
+ union power_supply_propval *val)
+{
+ struct s3c_adc_bat *bat = power_supply_get_drvdata(psy);
+
+ int new_level;
+ int full_volt;
+ const struct s3c_adc_bat_thresh *lut;
+ unsigned int lut_size;
+
+ if (!bat) {
+ dev_err(&psy->dev, "no battery infos ?!\n");
+ return -EINVAL;
+ }
+
+ lut = bat->pdata->lut_noac;
+ lut_size = bat->pdata->lut_noac_cnt;
+
+ if (bat->volt_value < 0 || bat->cur_value < 0 ||
+ jiffies_to_msecs(jiffies - bat->timestamp) >
+ BAT_POLL_INTERVAL) {
+ bat->volt_value = gather_samples(bat->client,
+ bat->pdata->volt_samples,
+ bat->pdata->volt_channel) * bat->pdata->volt_mult;
+ bat->cur_value = gather_samples(bat->client,
+ bat->pdata->current_samples,
+ bat->pdata->current_channel) * bat->pdata->current_mult;
+ bat->timestamp = jiffies;
+ }
+
+ if (bat->cable_plugged &&
+ ((bat->pdata->gpio_charge_finished < 0) ||
+ !charge_finished(bat))) {
+ lut = bat->pdata->lut_acin;
+ lut_size = bat->pdata->lut_acin_cnt;
+ }
+
+ new_level = 100000;
+ full_volt = calc_full_volt((bat->volt_value / 1000),
+ (bat->cur_value / 1000), bat->pdata->internal_impedance);
+
+ if (full_volt < calc_full_volt(lut->volt, lut->cur,
+ bat->pdata->internal_impedance)) {
+ lut_size--;
+ while (lut_size--) {
+ int lut_volt1;
+ int lut_volt2;
+
+ lut_volt1 = calc_full_volt(lut[0].volt, lut[0].cur,
+ bat->pdata->internal_impedance);
+ lut_volt2 = calc_full_volt(lut[1].volt, lut[1].cur,
+ bat->pdata->internal_impedance);
+ if (full_volt < lut_volt1 && full_volt >= lut_volt2) {
+ new_level = (lut[1].level +
+ (lut[0].level - lut[1].level) *
+ (full_volt - lut_volt2) /
+ (lut_volt1 - lut_volt2)) * 1000;
+ break;
+ }
+ new_level = lut[1].level * 1000;
+ lut++;
+ }
+ }
+
+ bat->level = new_level;
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_STATUS:
+ if (bat->pdata->gpio_charge_finished < 0)
+ val->intval = bat->level == 100000 ?
+ POWER_SUPPLY_STATUS_FULL : bat->status;
+ else
+ val->intval = bat->status;
+ return 0;
+ case POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN:
+ val->intval = 100000;
+ return 0;
+ case POWER_SUPPLY_PROP_CHARGE_EMPTY_DESIGN:
+ val->intval = 0;
+ return 0;
+ case POWER_SUPPLY_PROP_CHARGE_NOW:
+ val->intval = bat->level;
+ return 0;
+ case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+ val->intval = bat->volt_value;
+ return 0;
+ case POWER_SUPPLY_PROP_CURRENT_NOW:
+ val->intval = bat->cur_value;
+ return 0;
+ default:
+ return -EINVAL;
+ }
+}
+
+static const struct power_supply_desc main_bat_desc = {
+ .name = "main-battery",
+ .type = POWER_SUPPLY_TYPE_BATTERY,
+ .properties = s3c_adc_main_bat_props,
+ .num_properties = ARRAY_SIZE(s3c_adc_main_bat_props),
+ .get_property = s3c_adc_bat_get_property,
+ .external_power_changed = s3c_adc_bat_ext_power_changed,
+ .use_for_apm = 1,
+};
+
+static struct s3c_adc_bat main_bat;
+
+static void s3c_adc_bat_work(struct work_struct *work)
+{
+ struct s3c_adc_bat *bat = &main_bat;
+ int is_charged;
+ int is_plugged;
+ static int was_plugged;
+
+ is_plugged = power_supply_am_i_supplied(bat->psy);
+ bat->cable_plugged = is_plugged;
+ if (is_plugged != was_plugged) {
+ was_plugged = is_plugged;
+ if (is_plugged) {
+ if (bat->pdata->enable_charger)
+ bat->pdata->enable_charger();
+ bat->status = POWER_SUPPLY_STATUS_CHARGING;
+ } else {
+ if (bat->pdata->disable_charger)
+ bat->pdata->disable_charger();
+ bat->status = POWER_SUPPLY_STATUS_DISCHARGING;
+ }
+ } else {
+ if ((bat->pdata->gpio_charge_finished >= 0) && is_plugged) {
+ is_charged = charge_finished(&main_bat);
+ if (is_charged) {
+ if (bat->pdata->disable_charger)
+ bat->pdata->disable_charger();
+ bat->status = POWER_SUPPLY_STATUS_FULL;
+ } else {
+ if (bat->pdata->enable_charger)
+ bat->pdata->enable_charger();
+ bat->status = POWER_SUPPLY_STATUS_CHARGING;
+ }
+ }
+ }
+
+ power_supply_changed(bat->psy);
+}
+
+static irqreturn_t s3c_adc_bat_charged(int irq, void *dev_id)
+{
+ schedule_delayed_work(&bat_work,
+ msecs_to_jiffies(JITTER_DELAY));
+ return IRQ_HANDLED;
+}
+
+static int s3c_adc_bat_probe(struct platform_device *pdev)
+{
+ struct s3c_adc_client *client;
+ struct s3c_adc_bat_pdata *pdata = pdev->dev.platform_data;
+ struct power_supply_config psy_cfg = {};
+ int ret;
+
+ client = s3c_adc_register(pdev, NULL, NULL, 0);
+ if (IS_ERR(client)) {
+ dev_err(&pdev->dev, "cannot register adc\n");
+ return PTR_ERR(client);
+ }
+
+ platform_set_drvdata(pdev, client);
+
+ main_bat.client = client;
+ main_bat.pdata = pdata;
+ main_bat.volt_value = -1;
+ main_bat.cur_value = -1;
+ main_bat.cable_plugged = 0;
+ main_bat.status = POWER_SUPPLY_STATUS_DISCHARGING;
+ psy_cfg.drv_data = &main_bat;
+
+ main_bat.psy = power_supply_register(&pdev->dev, &main_bat_desc, &psy_cfg);
+ if (IS_ERR(main_bat.psy)) {
+ ret = PTR_ERR(main_bat.psy);
+ goto err_reg_main;
+ }
+ if (pdata->backup_volt_mult) {
+ const struct power_supply_config backup_psy_cfg
+ = { .drv_data = &backup_bat, };
+
+ backup_bat.client = client;
+ backup_bat.pdata = pdev->dev.platform_data;
+ backup_bat.volt_value = -1;
+ backup_bat.psy = power_supply_register(&pdev->dev,
+ &backup_bat_desc,
+ &backup_psy_cfg);
+ if (IS_ERR(backup_bat.psy)) {
+ ret = PTR_ERR(backup_bat.psy);
+ goto err_reg_backup;
+ }
+ }
+
+ INIT_DELAYED_WORK(&bat_work, s3c_adc_bat_work);
+
+ if (pdata->gpio_charge_finished >= 0) {
+ ret = gpio_request(pdata->gpio_charge_finished, "charged");
+ if (ret)
+ goto err_gpio;
+
+ ret = request_irq(gpio_to_irq(pdata->gpio_charge_finished),
+ s3c_adc_bat_charged,
+ IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
+ "battery charged", NULL);
+ if (ret)
+ goto err_irq;
+ }
+
+ if (pdata->init) {
+ ret = pdata->init();
+ if (ret)
+ goto err_platform;
+ }
+
+ dev_info(&pdev->dev, "successfully loaded\n");
+ device_init_wakeup(&pdev->dev, 1);
+
+ /* Schedule timer to check current status */
+ schedule_delayed_work(&bat_work,
+ msecs_to_jiffies(JITTER_DELAY));
+
+ return 0;
+
+err_platform:
+ if (pdata->gpio_charge_finished >= 0)
+ free_irq(gpio_to_irq(pdata->gpio_charge_finished), NULL);
+err_irq:
+ if (pdata->gpio_charge_finished >= 0)
+ gpio_free(pdata->gpio_charge_finished);
+err_gpio:
+ if (pdata->backup_volt_mult)
+ power_supply_unregister(backup_bat.psy);
+err_reg_backup:
+ power_supply_unregister(main_bat.psy);
+err_reg_main:
+ return ret;
+}
+
+static int s3c_adc_bat_remove(struct platform_device *pdev)
+{
+ struct s3c_adc_client *client = platform_get_drvdata(pdev);
+ struct s3c_adc_bat_pdata *pdata = pdev->dev.platform_data;
+
+ power_supply_unregister(main_bat.psy);
+ if (pdata->backup_volt_mult)
+ power_supply_unregister(backup_bat.psy);
+
+ s3c_adc_release(client);
+
+ if (pdata->gpio_charge_finished >= 0) {
+ free_irq(gpio_to_irq(pdata->gpio_charge_finished), NULL);
+ gpio_free(pdata->gpio_charge_finished);
+ }
+
+ cancel_delayed_work_sync(&bat_work);
+
+ if (pdata->exit)
+ pdata->exit();
+
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int s3c_adc_bat_suspend(struct platform_device *pdev,
+ pm_message_t state)
+{
+ struct s3c_adc_bat_pdata *pdata = pdev->dev.platform_data;
+
+ if (pdata->gpio_charge_finished >= 0) {
+ if (device_may_wakeup(&pdev->dev))
+ enable_irq_wake(
+ gpio_to_irq(pdata->gpio_charge_finished));
+ else {
+ disable_irq(gpio_to_irq(pdata->gpio_charge_finished));
+ main_bat.pdata->disable_charger();
+ }
+ }
+
+ return 0;
+}
+
+static int s3c_adc_bat_resume(struct platform_device *pdev)
+{
+ struct s3c_adc_bat_pdata *pdata = pdev->dev.platform_data;
+
+ if (pdata->gpio_charge_finished >= 0) {
+ if (device_may_wakeup(&pdev->dev))
+ disable_irq_wake(
+ gpio_to_irq(pdata->gpio_charge_finished));
+ else
+ enable_irq(gpio_to_irq(pdata->gpio_charge_finished));
+ }
+
+ /* Schedule timer to check current status */
+ schedule_delayed_work(&bat_work,
+ msecs_to_jiffies(JITTER_DELAY));
+
+ return 0;
+}
+#else
+#define s3c_adc_bat_suspend NULL
+#define s3c_adc_bat_resume NULL
+#endif
+
+static struct platform_driver s3c_adc_bat_driver = {
+ .driver = {
+ .name = "s3c-adc-battery",
+ },
+ .probe = s3c_adc_bat_probe,
+ .remove = s3c_adc_bat_remove,
+ .suspend = s3c_adc_bat_suspend,
+ .resume = s3c_adc_bat_resume,
+};
+
+module_platform_driver(s3c_adc_bat_driver);
+
+MODULE_AUTHOR("Vasily Khoruzhick <anarsoul@gmail.com>");
+MODULE_DESCRIPTION("iPAQ H1930/H1940/RX1950 battery controller driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/power/supply/sbs-battery.c b/drivers/power/supply/sbs-battery.c
new file mode 100644
index 000000000..b6a538ebb
--- /dev/null
+++ b/drivers/power/supply/sbs-battery.c
@@ -0,0 +1,1267 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Gas Gauge driver for SBS Compliant Batteries
+ *
+ * Copyright (c) 2010, NVIDIA Corporation.
+ */
+
+#include <linux/bits.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/gpio/consumer.h>
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/property.h>
+#include <linux/of_device.h>
+#include <linux/power/sbs-battery.h>
+#include <linux/power_supply.h>
+#include <linux/slab.h>
+#include <linux/stat.h>
+
+enum {
+ REG_MANUFACTURER_DATA,
+ REG_BATTERY_MODE,
+ REG_TEMPERATURE,
+ REG_VOLTAGE,
+ REG_CURRENT_NOW,
+ REG_CURRENT_AVG,
+ REG_MAX_ERR,
+ REG_CAPACITY,
+ REG_TIME_TO_EMPTY,
+ REG_TIME_TO_FULL,
+ REG_STATUS,
+ REG_CAPACITY_LEVEL,
+ REG_CYCLE_COUNT,
+ REG_SERIAL_NUMBER,
+ REG_REMAINING_CAPACITY,
+ REG_REMAINING_CAPACITY_CHARGE,
+ REG_FULL_CHARGE_CAPACITY,
+ REG_FULL_CHARGE_CAPACITY_CHARGE,
+ REG_DESIGN_CAPACITY,
+ REG_DESIGN_CAPACITY_CHARGE,
+ REG_DESIGN_VOLTAGE_MIN,
+ REG_DESIGN_VOLTAGE_MAX,
+ REG_CHEMISTRY,
+ REG_MANUFACTURER,
+ REG_MODEL_NAME,
+ REG_CHARGE_CURRENT,
+ REG_CHARGE_VOLTAGE,
+};
+
+#define REG_ADDR_SPEC_INFO 0x1A
+#define SPEC_INFO_VERSION_MASK GENMASK(7, 4)
+#define SPEC_INFO_VERSION_SHIFT 4
+
+#define SBS_VERSION_1_0 1
+#define SBS_VERSION_1_1 2
+#define SBS_VERSION_1_1_WITH_PEC 3
+
+#define REG_ADDR_MANUFACTURE_DATE 0x1B
+
+/* Battery Mode defines */
+#define BATTERY_MODE_OFFSET 0x03
+#define BATTERY_MODE_CAPACITY_MASK BIT(15)
+enum sbs_capacity_mode {
+ CAPACITY_MODE_AMPS = 0,
+ CAPACITY_MODE_WATTS = BATTERY_MODE_CAPACITY_MASK
+};
+#define BATTERY_MODE_CHARGER_MASK (1<<14)
+
+/* manufacturer access defines */
+#define MANUFACTURER_ACCESS_STATUS 0x0006
+#define MANUFACTURER_ACCESS_SLEEP 0x0011
+
+/* battery status value bits */
+#define BATTERY_INITIALIZED 0x80
+#define BATTERY_DISCHARGING 0x40
+#define BATTERY_FULL_CHARGED 0x20
+#define BATTERY_FULL_DISCHARGED 0x10
+
+/* min_value and max_value are only valid for numerical data */
+#define SBS_DATA(_psp, _addr, _min_value, _max_value) { \
+ .psp = _psp, \
+ .addr = _addr, \
+ .min_value = _min_value, \
+ .max_value = _max_value, \
+}
+
+static const struct chip_data {
+ enum power_supply_property psp;
+ u8 addr;
+ int min_value;
+ int max_value;
+} sbs_data[] = {
+ [REG_MANUFACTURER_DATA] =
+ SBS_DATA(POWER_SUPPLY_PROP_PRESENT, 0x00, 0, 65535),
+ [REG_BATTERY_MODE] =
+ SBS_DATA(-1, 0x03, 0, 65535),
+ [REG_TEMPERATURE] =
+ SBS_DATA(POWER_SUPPLY_PROP_TEMP, 0x08, 0, 65535),
+ [REG_VOLTAGE] =
+ SBS_DATA(POWER_SUPPLY_PROP_VOLTAGE_NOW, 0x09, 0, 20000),
+ [REG_CURRENT_NOW] =
+ SBS_DATA(POWER_SUPPLY_PROP_CURRENT_NOW, 0x0A, -32768, 32767),
+ [REG_CURRENT_AVG] =
+ SBS_DATA(POWER_SUPPLY_PROP_CURRENT_AVG, 0x0B, -32768, 32767),
+ [REG_MAX_ERR] =
+ SBS_DATA(POWER_SUPPLY_PROP_CAPACITY_ERROR_MARGIN, 0x0c, 0, 100),
+ [REG_CAPACITY] =
+ SBS_DATA(POWER_SUPPLY_PROP_CAPACITY, 0x0D, 0, 100),
+ [REG_REMAINING_CAPACITY] =
+ SBS_DATA(POWER_SUPPLY_PROP_ENERGY_NOW, 0x0F, 0, 65535),
+ [REG_REMAINING_CAPACITY_CHARGE] =
+ SBS_DATA(POWER_SUPPLY_PROP_CHARGE_NOW, 0x0F, 0, 65535),
+ [REG_FULL_CHARGE_CAPACITY] =
+ SBS_DATA(POWER_SUPPLY_PROP_ENERGY_FULL, 0x10, 0, 65535),
+ [REG_FULL_CHARGE_CAPACITY_CHARGE] =
+ SBS_DATA(POWER_SUPPLY_PROP_CHARGE_FULL, 0x10, 0, 65535),
+ [REG_TIME_TO_EMPTY] =
+ SBS_DATA(POWER_SUPPLY_PROP_TIME_TO_EMPTY_AVG, 0x12, 0, 65535),
+ [REG_TIME_TO_FULL] =
+ SBS_DATA(POWER_SUPPLY_PROP_TIME_TO_FULL_AVG, 0x13, 0, 65535),
+ [REG_CHARGE_CURRENT] =
+ SBS_DATA(POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX, 0x14, 0, 65535),
+ [REG_CHARGE_VOLTAGE] =
+ SBS_DATA(POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX, 0x15, 0, 65535),
+ [REG_STATUS] =
+ SBS_DATA(POWER_SUPPLY_PROP_STATUS, 0x16, 0, 65535),
+ [REG_CAPACITY_LEVEL] =
+ SBS_DATA(POWER_SUPPLY_PROP_CAPACITY_LEVEL, 0x16, 0, 65535),
+ [REG_CYCLE_COUNT] =
+ SBS_DATA(POWER_SUPPLY_PROP_CYCLE_COUNT, 0x17, 0, 65535),
+ [REG_DESIGN_CAPACITY] =
+ SBS_DATA(POWER_SUPPLY_PROP_ENERGY_FULL_DESIGN, 0x18, 0, 65535),
+ [REG_DESIGN_CAPACITY_CHARGE] =
+ SBS_DATA(POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN, 0x18, 0, 65535),
+ [REG_DESIGN_VOLTAGE_MIN] =
+ SBS_DATA(POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN, 0x19, 0, 65535),
+ [REG_DESIGN_VOLTAGE_MAX] =
+ SBS_DATA(POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN, 0x19, 0, 65535),
+ [REG_SERIAL_NUMBER] =
+ SBS_DATA(POWER_SUPPLY_PROP_SERIAL_NUMBER, 0x1C, 0, 65535),
+ /* Properties of type `const char *' */
+ [REG_MANUFACTURER] =
+ SBS_DATA(POWER_SUPPLY_PROP_MANUFACTURER, 0x20, 0, 65535),
+ [REG_MODEL_NAME] =
+ SBS_DATA(POWER_SUPPLY_PROP_MODEL_NAME, 0x21, 0, 65535),
+ [REG_CHEMISTRY] =
+ SBS_DATA(POWER_SUPPLY_PROP_TECHNOLOGY, 0x22, 0, 65535)
+};
+
+static const enum power_supply_property sbs_properties[] = {
+ POWER_SUPPLY_PROP_STATUS,
+ POWER_SUPPLY_PROP_CAPACITY_LEVEL,
+ POWER_SUPPLY_PROP_HEALTH,
+ POWER_SUPPLY_PROP_PRESENT,
+ POWER_SUPPLY_PROP_TECHNOLOGY,
+ POWER_SUPPLY_PROP_CYCLE_COUNT,
+ POWER_SUPPLY_PROP_VOLTAGE_NOW,
+ POWER_SUPPLY_PROP_CURRENT_NOW,
+ POWER_SUPPLY_PROP_CURRENT_AVG,
+ POWER_SUPPLY_PROP_CAPACITY,
+ POWER_SUPPLY_PROP_CAPACITY_ERROR_MARGIN,
+ POWER_SUPPLY_PROP_TEMP,
+ POWER_SUPPLY_PROP_TIME_TO_EMPTY_AVG,
+ POWER_SUPPLY_PROP_TIME_TO_FULL_AVG,
+ POWER_SUPPLY_PROP_SERIAL_NUMBER,
+ POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN,
+ POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN,
+ POWER_SUPPLY_PROP_ENERGY_NOW,
+ POWER_SUPPLY_PROP_ENERGY_FULL,
+ POWER_SUPPLY_PROP_ENERGY_FULL_DESIGN,
+ POWER_SUPPLY_PROP_CHARGE_NOW,
+ POWER_SUPPLY_PROP_CHARGE_FULL,
+ POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN,
+ POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX,
+ POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX,
+ POWER_SUPPLY_PROP_MANUFACTURE_YEAR,
+ POWER_SUPPLY_PROP_MANUFACTURE_MONTH,
+ POWER_SUPPLY_PROP_MANUFACTURE_DAY,
+ /* Properties of type `const char *' */
+ POWER_SUPPLY_PROP_MANUFACTURER,
+ POWER_SUPPLY_PROP_MODEL_NAME
+};
+
+/* Supports special manufacturer commands from TI BQ20Z65 and BQ20Z75 IC. */
+#define SBS_FLAGS_TI_BQ20ZX5 BIT(0)
+
+struct sbs_info {
+ struct i2c_client *client;
+ struct power_supply *power_supply;
+ bool is_present;
+ struct gpio_desc *gpio_detect;
+ bool charger_broadcasts;
+ int last_state;
+ int poll_time;
+ u32 i2c_retry_count;
+ u32 poll_retry_count;
+ struct delayed_work work;
+ struct mutex mode_lock;
+ u32 flags;
+};
+
+static char model_name[I2C_SMBUS_BLOCK_MAX + 1];
+static char manufacturer[I2C_SMBUS_BLOCK_MAX + 1];
+static char chemistry[I2C_SMBUS_BLOCK_MAX + 1];
+static bool force_load;
+
+static int sbs_read_word_data(struct i2c_client *client, u8 address);
+static int sbs_write_word_data(struct i2c_client *client, u8 address, u16 value);
+
+static void sbs_disable_charger_broadcasts(struct sbs_info *chip)
+{
+ int val = sbs_read_word_data(chip->client, BATTERY_MODE_OFFSET);
+ if (val < 0)
+ goto exit;
+
+ val |= BATTERY_MODE_CHARGER_MASK;
+
+ val = sbs_write_word_data(chip->client, BATTERY_MODE_OFFSET, val);
+
+exit:
+ if (val < 0)
+ dev_err(&chip->client->dev,
+ "Failed to disable charger broadcasting: %d\n", val);
+ else
+ dev_dbg(&chip->client->dev, "%s\n", __func__);
+}
+
+static int sbs_update_presence(struct sbs_info *chip, bool is_present)
+{
+ struct i2c_client *client = chip->client;
+ int retries = chip->i2c_retry_count;
+ s32 ret = 0;
+ u8 version;
+
+ if (chip->is_present == is_present)
+ return 0;
+
+ if (!is_present) {
+ chip->is_present = false;
+ /* Disable PEC when no device is present */
+ client->flags &= ~I2C_CLIENT_PEC;
+ return 0;
+ }
+
+ /* Check if device supports packet error checking and use it */
+ while (retries > 0) {
+ ret = i2c_smbus_read_word_data(client, REG_ADDR_SPEC_INFO);
+ if (ret >= 0)
+ break;
+
+ /*
+ * Some batteries trigger the detection pin before the
+ * I2C bus is properly connected. This works around the
+ * issue.
+ */
+ msleep(100);
+
+ retries--;
+ }
+
+ if (ret < 0) {
+ dev_dbg(&client->dev, "failed to read spec info: %d\n", ret);
+
+ /* fallback to old behaviour */
+ client->flags &= ~I2C_CLIENT_PEC;
+ chip->is_present = true;
+
+ return ret;
+ }
+
+ version = (ret & SPEC_INFO_VERSION_MASK) >> SPEC_INFO_VERSION_SHIFT;
+
+ if (version == SBS_VERSION_1_1_WITH_PEC)
+ client->flags |= I2C_CLIENT_PEC;
+ else
+ client->flags &= ~I2C_CLIENT_PEC;
+
+ if (of_device_is_compatible(client->dev.parent->of_node, "google,cros-ec-i2c-tunnel")
+ && client->flags & I2C_CLIENT_PEC) {
+ dev_info(&client->dev, "Disabling PEC because of broken Cros-EC implementation\n");
+ client->flags &= ~I2C_CLIENT_PEC;
+ }
+
+ dev_dbg(&client->dev, "PEC: %s\n", (client->flags & I2C_CLIENT_PEC) ?
+ "enabled" : "disabled");
+
+ if (!chip->is_present && is_present && !chip->charger_broadcasts)
+ sbs_disable_charger_broadcasts(chip);
+
+ chip->is_present = true;
+
+ return 0;
+}
+
+static int sbs_read_word_data(struct i2c_client *client, u8 address)
+{
+ struct sbs_info *chip = i2c_get_clientdata(client);
+ int retries = chip->i2c_retry_count;
+ s32 ret = 0;
+
+ while (retries > 0) {
+ ret = i2c_smbus_read_word_data(client, address);
+ if (ret >= 0)
+ break;
+ retries--;
+ }
+
+ if (ret < 0) {
+ dev_dbg(&client->dev,
+ "%s: i2c read at address 0x%x failed\n",
+ __func__, address);
+ return ret;
+ }
+
+ return ret;
+}
+
+static int sbs_read_string_data_fallback(struct i2c_client *client, u8 address, char *values)
+{
+ struct sbs_info *chip = i2c_get_clientdata(client);
+ s32 ret = 0, block_length = 0;
+ int retries_length, retries_block;
+ u8 block_buffer[I2C_SMBUS_BLOCK_MAX + 1];
+
+ retries_length = chip->i2c_retry_count;
+ retries_block = chip->i2c_retry_count;
+
+ dev_warn_once(&client->dev, "I2C adapter does not support I2C_FUNC_SMBUS_READ_BLOCK_DATA.\n"
+ "Fallback method does not support PEC.\n");
+
+ /* Adapter needs to support these two functions */
+ if (!i2c_check_functionality(client->adapter,
+ I2C_FUNC_SMBUS_BYTE_DATA |
+ I2C_FUNC_SMBUS_I2C_BLOCK)){
+ return -ENODEV;
+ }
+
+ /* Get the length of block data */
+ while (retries_length > 0) {
+ ret = i2c_smbus_read_byte_data(client, address);
+ if (ret >= 0)
+ break;
+ retries_length--;
+ }
+
+ if (ret < 0) {
+ dev_dbg(&client->dev,
+ "%s: i2c read at address 0x%x failed\n",
+ __func__, address);
+ return ret;
+ }
+
+ /* block_length does not include NULL terminator */
+ block_length = ret;
+ if (block_length > I2C_SMBUS_BLOCK_MAX) {
+ dev_err(&client->dev,
+ "%s: Returned block_length is longer than 0x%x\n",
+ __func__, I2C_SMBUS_BLOCK_MAX);
+ return -EINVAL;
+ }
+
+ /* Get the block data */
+ while (retries_block > 0) {
+ ret = i2c_smbus_read_i2c_block_data(
+ client, address,
+ block_length + 1, block_buffer);
+ if (ret >= 0)
+ break;
+ retries_block--;
+ }
+
+ if (ret < 0) {
+ dev_dbg(&client->dev,
+ "%s: i2c read at address 0x%x failed\n",
+ __func__, address);
+ return ret;
+ }
+
+ /* block_buffer[0] == block_length */
+ memcpy(values, block_buffer + 1, block_length);
+ values[block_length] = '\0';
+
+ return ret;
+}
+
+static int sbs_read_string_data(struct i2c_client *client, u8 address, char *values)
+{
+ struct sbs_info *chip = i2c_get_clientdata(client);
+ int retries = chip->i2c_retry_count;
+ int ret = 0;
+
+ if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_READ_BLOCK_DATA)) {
+ bool pec = client->flags & I2C_CLIENT_PEC;
+ client->flags &= ~I2C_CLIENT_PEC;
+ ret = sbs_read_string_data_fallback(client, address, values);
+ if (pec)
+ client->flags |= I2C_CLIENT_PEC;
+ return ret;
+ }
+
+ while (retries > 0) {
+ ret = i2c_smbus_read_block_data(client, address, values);
+ if (ret >= 0)
+ break;
+ retries--;
+ }
+
+ if (ret < 0) {
+ dev_dbg(&client->dev, "failed to read block 0x%x: %d\n", address, ret);
+ return ret;
+ }
+
+ /* add string termination */
+ values[ret] = '\0';
+ return ret;
+}
+
+static int sbs_write_word_data(struct i2c_client *client, u8 address,
+ u16 value)
+{
+ struct sbs_info *chip = i2c_get_clientdata(client);
+ int retries = chip->i2c_retry_count;
+ s32 ret = 0;
+
+ while (retries > 0) {
+ ret = i2c_smbus_write_word_data(client, address, value);
+ if (ret >= 0)
+ break;
+ retries--;
+ }
+
+ if (ret < 0) {
+ dev_dbg(&client->dev,
+ "%s: i2c write to address 0x%x failed\n",
+ __func__, address);
+ return ret;
+ }
+
+ return 0;
+}
+
+static int sbs_status_correct(struct i2c_client *client, int *intval)
+{
+ int ret;
+
+ ret = sbs_read_word_data(client, sbs_data[REG_CURRENT_NOW].addr);
+ if (ret < 0)
+ return ret;
+
+ ret = (s16)ret;
+
+ /* Not drawing current -> not charging (i.e. idle) */
+ if (*intval != POWER_SUPPLY_STATUS_FULL && ret == 0)
+ *intval = POWER_SUPPLY_STATUS_NOT_CHARGING;
+
+ if (*intval == POWER_SUPPLY_STATUS_FULL) {
+ /* Drawing or providing current when full */
+ if (ret > 0)
+ *intval = POWER_SUPPLY_STATUS_CHARGING;
+ else if (ret < 0)
+ *intval = POWER_SUPPLY_STATUS_DISCHARGING;
+ }
+
+ return 0;
+}
+
+static bool sbs_bat_needs_calibration(struct i2c_client *client)
+{
+ int ret;
+
+ ret = sbs_read_word_data(client, sbs_data[REG_BATTERY_MODE].addr);
+ if (ret < 0)
+ return false;
+
+ return !!(ret & BIT(7));
+}
+
+static int sbs_get_ti_battery_presence_and_health(
+ struct i2c_client *client, enum power_supply_property psp,
+ union power_supply_propval *val)
+{
+ s32 ret;
+
+ /*
+ * Write to ManufacturerAccess with ManufacturerAccess command
+ * and then read the status.
+ */
+ ret = sbs_write_word_data(client, sbs_data[REG_MANUFACTURER_DATA].addr,
+ MANUFACTURER_ACCESS_STATUS);
+ if (ret < 0) {
+ if (psp == POWER_SUPPLY_PROP_PRESENT)
+ val->intval = 0; /* battery removed */
+ return ret;
+ }
+
+ ret = sbs_read_word_data(client, sbs_data[REG_MANUFACTURER_DATA].addr);
+ if (ret < 0) {
+ if (psp == POWER_SUPPLY_PROP_PRESENT)
+ val->intval = 0; /* battery removed */
+ return ret;
+ }
+
+ if (ret < sbs_data[REG_MANUFACTURER_DATA].min_value ||
+ ret > sbs_data[REG_MANUFACTURER_DATA].max_value) {
+ val->intval = 0;
+ return 0;
+ }
+
+ /* Mask the upper nibble of 2nd byte and
+ * lower byte of response then
+ * shift the result by 8 to get status*/
+ ret &= 0x0F00;
+ ret >>= 8;
+ if (psp == POWER_SUPPLY_PROP_PRESENT) {
+ if (ret == 0x0F)
+ /* battery removed */
+ val->intval = 0;
+ else
+ val->intval = 1;
+ } else if (psp == POWER_SUPPLY_PROP_HEALTH) {
+ if (ret == 0x09)
+ val->intval = POWER_SUPPLY_HEALTH_UNSPEC_FAILURE;
+ else if (ret == 0x0B)
+ val->intval = POWER_SUPPLY_HEALTH_OVERHEAT;
+ else if (ret == 0x0C)
+ val->intval = POWER_SUPPLY_HEALTH_DEAD;
+ else if (sbs_bat_needs_calibration(client))
+ val->intval = POWER_SUPPLY_HEALTH_CALIBRATION_REQUIRED;
+ else
+ val->intval = POWER_SUPPLY_HEALTH_GOOD;
+ }
+
+ return 0;
+}
+
+static int sbs_get_battery_presence_and_health(
+ struct i2c_client *client, enum power_supply_property psp,
+ union power_supply_propval *val)
+{
+ struct sbs_info *chip = i2c_get_clientdata(client);
+ int ret;
+
+ if (chip->flags & SBS_FLAGS_TI_BQ20ZX5)
+ return sbs_get_ti_battery_presence_and_health(client, psp, val);
+
+ /* Dummy command; if it succeeds, battery is present. */
+ ret = sbs_read_word_data(client, sbs_data[REG_STATUS].addr);
+
+ if (ret < 0) { /* battery not present*/
+ if (psp == POWER_SUPPLY_PROP_PRESENT) {
+ val->intval = 0;
+ return 0;
+ }
+ return ret;
+ }
+
+ if (psp == POWER_SUPPLY_PROP_PRESENT)
+ val->intval = 1; /* battery present */
+ else { /* POWER_SUPPLY_PROP_HEALTH */
+ if (sbs_bat_needs_calibration(client)) {
+ val->intval = POWER_SUPPLY_HEALTH_CALIBRATION_REQUIRED;
+ } else {
+ /* SBS spec doesn't have a general health command. */
+ val->intval = POWER_SUPPLY_HEALTH_UNKNOWN;
+ }
+ }
+
+ return 0;
+}
+
+static int sbs_get_battery_property(struct i2c_client *client,
+ int reg_offset, enum power_supply_property psp,
+ union power_supply_propval *val)
+{
+ struct sbs_info *chip = i2c_get_clientdata(client);
+ s32 ret;
+
+ ret = sbs_read_word_data(client, sbs_data[reg_offset].addr);
+ if (ret < 0)
+ return ret;
+
+ /* returned values are 16 bit */
+ if (sbs_data[reg_offset].min_value < 0)
+ ret = (s16)ret;
+
+ if (ret >= sbs_data[reg_offset].min_value &&
+ ret <= sbs_data[reg_offset].max_value) {
+ val->intval = ret;
+ if (psp == POWER_SUPPLY_PROP_CAPACITY_LEVEL) {
+ if (!(ret & BATTERY_INITIALIZED))
+ val->intval =
+ POWER_SUPPLY_CAPACITY_LEVEL_UNKNOWN;
+ else if (ret & BATTERY_FULL_CHARGED)
+ val->intval =
+ POWER_SUPPLY_CAPACITY_LEVEL_FULL;
+ else if (ret & BATTERY_FULL_DISCHARGED)
+ val->intval =
+ POWER_SUPPLY_CAPACITY_LEVEL_CRITICAL;
+ else
+ val->intval =
+ POWER_SUPPLY_CAPACITY_LEVEL_NORMAL;
+ return 0;
+ } else if (psp != POWER_SUPPLY_PROP_STATUS) {
+ return 0;
+ }
+
+ if (ret & BATTERY_FULL_CHARGED)
+ val->intval = POWER_SUPPLY_STATUS_FULL;
+ else if (ret & BATTERY_DISCHARGING)
+ val->intval = POWER_SUPPLY_STATUS_DISCHARGING;
+ else
+ val->intval = POWER_SUPPLY_STATUS_CHARGING;
+
+ sbs_status_correct(client, &val->intval);
+
+ if (chip->poll_time == 0)
+ chip->last_state = val->intval;
+ else if (chip->last_state != val->intval) {
+ cancel_delayed_work_sync(&chip->work);
+ power_supply_changed(chip->power_supply);
+ chip->poll_time = 0;
+ }
+ } else {
+ if (psp == POWER_SUPPLY_PROP_STATUS)
+ val->intval = POWER_SUPPLY_STATUS_UNKNOWN;
+ else if (psp == POWER_SUPPLY_PROP_CAPACITY)
+ /* sbs spec says that this can be >100 %
+ * even if max value is 100 %
+ */
+ val->intval = min(ret, 100);
+ else
+ val->intval = 0;
+ }
+
+ return 0;
+}
+
+static int sbs_get_battery_string_property(struct i2c_client *client,
+ int reg_offset, enum power_supply_property psp, char *val)
+{
+ s32 ret;
+
+ ret = sbs_read_string_data(client, sbs_data[reg_offset].addr, val);
+
+ if (ret < 0)
+ return ret;
+
+ return 0;
+}
+
+static void sbs_unit_adjustment(struct i2c_client *client,
+ enum power_supply_property psp, union power_supply_propval *val)
+{
+#define BASE_UNIT_CONVERSION 1000
+#define BATTERY_MODE_CAP_MULT_WATT (10 * BASE_UNIT_CONVERSION)
+#define TIME_UNIT_CONVERSION 60
+#define TEMP_KELVIN_TO_CELSIUS 2731
+ switch (psp) {
+ case POWER_SUPPLY_PROP_ENERGY_NOW:
+ case POWER_SUPPLY_PROP_ENERGY_FULL:
+ case POWER_SUPPLY_PROP_ENERGY_FULL_DESIGN:
+ /* sbs provides energy in units of 10mWh.
+ * Convert to µWh
+ */
+ val->intval *= BATTERY_MODE_CAP_MULT_WATT;
+ break;
+
+ case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+ case POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN:
+ case POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN:
+ case POWER_SUPPLY_PROP_CURRENT_NOW:
+ case POWER_SUPPLY_PROP_CURRENT_AVG:
+ case POWER_SUPPLY_PROP_CHARGE_NOW:
+ case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX:
+ case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX:
+ case POWER_SUPPLY_PROP_CHARGE_FULL:
+ case POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN:
+ val->intval *= BASE_UNIT_CONVERSION;
+ break;
+
+ case POWER_SUPPLY_PROP_TEMP:
+ /* sbs provides battery temperature in 0.1K
+ * so convert it to 0.1°C
+ */
+ val->intval -= TEMP_KELVIN_TO_CELSIUS;
+ break;
+
+ case POWER_SUPPLY_PROP_TIME_TO_EMPTY_AVG:
+ case POWER_SUPPLY_PROP_TIME_TO_FULL_AVG:
+ /* sbs provides time to empty and time to full in minutes.
+ * Convert to seconds
+ */
+ val->intval *= TIME_UNIT_CONVERSION;
+ break;
+
+ default:
+ dev_dbg(&client->dev,
+ "%s: no need for unit conversion %d\n", __func__, psp);
+ }
+}
+
+static enum sbs_capacity_mode sbs_set_capacity_mode(struct i2c_client *client,
+ enum sbs_capacity_mode mode)
+{
+ int ret, original_val;
+
+ original_val = sbs_read_word_data(client, BATTERY_MODE_OFFSET);
+ if (original_val < 0)
+ return original_val;
+
+ if ((original_val & BATTERY_MODE_CAPACITY_MASK) == mode)
+ return mode;
+
+ if (mode == CAPACITY_MODE_AMPS)
+ ret = original_val & ~BATTERY_MODE_CAPACITY_MASK;
+ else
+ ret = original_val | BATTERY_MODE_CAPACITY_MASK;
+
+ ret = sbs_write_word_data(client, BATTERY_MODE_OFFSET, ret);
+ if (ret < 0)
+ return ret;
+
+ usleep_range(1000, 2000);
+
+ return original_val & BATTERY_MODE_CAPACITY_MASK;
+}
+
+static int sbs_get_battery_capacity(struct i2c_client *client,
+ int reg_offset, enum power_supply_property psp,
+ union power_supply_propval *val)
+{
+ s32 ret;
+ enum sbs_capacity_mode mode = CAPACITY_MODE_WATTS;
+
+ if (power_supply_is_amp_property(psp))
+ mode = CAPACITY_MODE_AMPS;
+
+ mode = sbs_set_capacity_mode(client, mode);
+ if ((int)mode < 0)
+ return mode;
+
+ ret = sbs_read_word_data(client, sbs_data[reg_offset].addr);
+ if (ret < 0)
+ return ret;
+
+ val->intval = ret;
+
+ ret = sbs_set_capacity_mode(client, mode);
+ if (ret < 0)
+ return ret;
+
+ return 0;
+}
+
+static char sbs_serial[5];
+static int sbs_get_battery_serial_number(struct i2c_client *client,
+ union power_supply_propval *val)
+{
+ int ret;
+
+ ret = sbs_read_word_data(client, sbs_data[REG_SERIAL_NUMBER].addr);
+ if (ret < 0)
+ return ret;
+
+ sprintf(sbs_serial, "%04x", ret);
+ val->strval = sbs_serial;
+
+ return 0;
+}
+
+static int sbs_get_property_index(struct i2c_client *client,
+ enum power_supply_property psp)
+{
+ int count;
+ for (count = 0; count < ARRAY_SIZE(sbs_data); count++)
+ if (psp == sbs_data[count].psp)
+ return count;
+
+ dev_warn(&client->dev,
+ "%s: Invalid Property - %d\n", __func__, psp);
+
+ return -EINVAL;
+}
+
+static int sbs_get_chemistry(struct i2c_client *client,
+ union power_supply_propval *val)
+{
+ enum power_supply_property psp = POWER_SUPPLY_PROP_TECHNOLOGY;
+ int ret;
+
+ ret = sbs_get_property_index(client, psp);
+ if (ret < 0)
+ return ret;
+
+ ret = sbs_get_battery_string_property(client, ret, psp,
+ chemistry);
+ if (ret < 0)
+ return ret;
+
+ if (!strncasecmp(chemistry, "LION", 4))
+ val->intval = POWER_SUPPLY_TECHNOLOGY_LION;
+ else if (!strncasecmp(chemistry, "LiP", 3))
+ val->intval = POWER_SUPPLY_TECHNOLOGY_LIPO;
+ else if (!strncasecmp(chemistry, "NiCd", 4))
+ val->intval = POWER_SUPPLY_TECHNOLOGY_NiCd;
+ else if (!strncasecmp(chemistry, "NiMH", 4))
+ val->intval = POWER_SUPPLY_TECHNOLOGY_NiMH;
+ else
+ val->intval = POWER_SUPPLY_TECHNOLOGY_UNKNOWN;
+
+ if (val->intval == POWER_SUPPLY_TECHNOLOGY_UNKNOWN)
+ dev_warn(&client->dev, "Unknown chemistry: %s\n", chemistry);
+
+ return 0;
+}
+
+static int sbs_get_battery_manufacture_date(struct i2c_client *client,
+ enum power_supply_property psp,
+ union power_supply_propval *val)
+{
+ int ret;
+ u16 day, month, year;
+
+ ret = sbs_read_word_data(client, REG_ADDR_MANUFACTURE_DATE);
+ if (ret < 0)
+ return ret;
+
+ day = ret & GENMASK(4, 0);
+ month = (ret & GENMASK(8, 5)) >> 5;
+ year = ((ret & GENMASK(15, 9)) >> 9) + 1980;
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_MANUFACTURE_YEAR:
+ val->intval = year;
+ break;
+ case POWER_SUPPLY_PROP_MANUFACTURE_MONTH:
+ val->intval = month;
+ break;
+ case POWER_SUPPLY_PROP_MANUFACTURE_DAY:
+ val->intval = day;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int sbs_get_property(struct power_supply *psy,
+ enum power_supply_property psp,
+ union power_supply_propval *val)
+{
+ int ret = 0;
+ struct sbs_info *chip = power_supply_get_drvdata(psy);
+ struct i2c_client *client = chip->client;
+
+ if (chip->gpio_detect) {
+ ret = gpiod_get_value_cansleep(chip->gpio_detect);
+ if (ret < 0)
+ return ret;
+ if (psp == POWER_SUPPLY_PROP_PRESENT) {
+ val->intval = ret;
+ sbs_update_presence(chip, ret);
+ return 0;
+ }
+ if (ret == 0)
+ return -ENODATA;
+ }
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_PRESENT:
+ case POWER_SUPPLY_PROP_HEALTH:
+ ret = sbs_get_battery_presence_and_health(client, psp, val);
+
+ /* this can only be true if no gpio is used */
+ if (psp == POWER_SUPPLY_PROP_PRESENT)
+ return 0;
+ break;
+
+ case POWER_SUPPLY_PROP_TECHNOLOGY:
+ ret = sbs_get_chemistry(client, val);
+ if (ret < 0)
+ break;
+
+ goto done; /* don't trigger power_supply_changed()! */
+
+ case POWER_SUPPLY_PROP_ENERGY_NOW:
+ case POWER_SUPPLY_PROP_ENERGY_FULL:
+ case POWER_SUPPLY_PROP_ENERGY_FULL_DESIGN:
+ case POWER_SUPPLY_PROP_CHARGE_NOW:
+ case POWER_SUPPLY_PROP_CHARGE_FULL:
+ case POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN:
+ ret = sbs_get_property_index(client, psp);
+ if (ret < 0)
+ break;
+
+ /* sbs_get_battery_capacity() will change the battery mode
+ * temporarily to read the requested attribute. Ensure we stay
+ * in the desired mode for the duration of the attribute read.
+ */
+ mutex_lock(&chip->mode_lock);
+ ret = sbs_get_battery_capacity(client, ret, psp, val);
+ mutex_unlock(&chip->mode_lock);
+ break;
+
+ case POWER_SUPPLY_PROP_SERIAL_NUMBER:
+ ret = sbs_get_battery_serial_number(client, val);
+ break;
+
+ case POWER_SUPPLY_PROP_STATUS:
+ case POWER_SUPPLY_PROP_CAPACITY_LEVEL:
+ case POWER_SUPPLY_PROP_CYCLE_COUNT:
+ case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+ case POWER_SUPPLY_PROP_CURRENT_NOW:
+ case POWER_SUPPLY_PROP_CURRENT_AVG:
+ case POWER_SUPPLY_PROP_TEMP:
+ case POWER_SUPPLY_PROP_TIME_TO_EMPTY_AVG:
+ case POWER_SUPPLY_PROP_TIME_TO_FULL_AVG:
+ case POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN:
+ case POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN:
+ case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX:
+ case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX:
+ case POWER_SUPPLY_PROP_CAPACITY:
+ case POWER_SUPPLY_PROP_CAPACITY_ERROR_MARGIN:
+ ret = sbs_get_property_index(client, psp);
+ if (ret < 0)
+ break;
+
+ ret = sbs_get_battery_property(client, ret, psp, val);
+ break;
+
+ case POWER_SUPPLY_PROP_MODEL_NAME:
+ ret = sbs_get_property_index(client, psp);
+ if (ret < 0)
+ break;
+
+ ret = sbs_get_battery_string_property(client, ret, psp,
+ model_name);
+ val->strval = model_name;
+ break;
+
+ case POWER_SUPPLY_PROP_MANUFACTURER:
+ ret = sbs_get_property_index(client, psp);
+ if (ret < 0)
+ break;
+
+ ret = sbs_get_battery_string_property(client, ret, psp,
+ manufacturer);
+ val->strval = manufacturer;
+ break;
+
+ case POWER_SUPPLY_PROP_MANUFACTURE_YEAR:
+ case POWER_SUPPLY_PROP_MANUFACTURE_MONTH:
+ case POWER_SUPPLY_PROP_MANUFACTURE_DAY:
+ ret = sbs_get_battery_manufacture_date(client, psp, val);
+ break;
+
+ default:
+ dev_err(&client->dev,
+ "%s: INVALID property\n", __func__);
+ return -EINVAL;
+ }
+
+ if (!chip->gpio_detect && chip->is_present != (ret >= 0)) {
+ bool old_present = chip->is_present;
+ union power_supply_propval val;
+ int err = sbs_get_battery_presence_and_health(
+ client, POWER_SUPPLY_PROP_PRESENT, &val);
+
+ sbs_update_presence(chip, !err && val.intval);
+
+ if (old_present != chip->is_present)
+ power_supply_changed(chip->power_supply);
+ }
+
+done:
+ if (!ret) {
+ /* Convert units to match requirements for power supply class */
+ sbs_unit_adjustment(client, psp, val);
+ dev_dbg(&client->dev,
+ "%s: property = %d, value = %x\n", __func__,
+ psp, val->intval);
+ } else if (!chip->is_present) {
+ /* battery not present, so return NODATA for properties */
+ ret = -ENODATA;
+ }
+ return ret;
+}
+
+static void sbs_supply_changed(struct sbs_info *chip)
+{
+ struct power_supply *battery = chip->power_supply;
+ int ret;
+
+ ret = gpiod_get_value_cansleep(chip->gpio_detect);
+ if (ret < 0)
+ return;
+ sbs_update_presence(chip, ret);
+ power_supply_changed(battery);
+}
+
+static irqreturn_t sbs_irq(int irq, void *devid)
+{
+ sbs_supply_changed(devid);
+ return IRQ_HANDLED;
+}
+
+static void sbs_alert(struct i2c_client *client, enum i2c_alert_protocol prot,
+ unsigned int data)
+{
+ sbs_supply_changed(i2c_get_clientdata(client));
+}
+
+static void sbs_external_power_changed(struct power_supply *psy)
+{
+ struct sbs_info *chip = power_supply_get_drvdata(psy);
+
+ /* cancel outstanding work */
+ cancel_delayed_work_sync(&chip->work);
+
+ schedule_delayed_work(&chip->work, HZ);
+ chip->poll_time = chip->poll_retry_count;
+}
+
+static void sbs_delayed_work(struct work_struct *work)
+{
+ struct sbs_info *chip;
+ s32 ret;
+
+ chip = container_of(work, struct sbs_info, work.work);
+
+ ret = sbs_read_word_data(chip->client, sbs_data[REG_STATUS].addr);
+ /* if the read failed, give up on this work */
+ if (ret < 0) {
+ chip->poll_time = 0;
+ return;
+ }
+
+ if (ret & BATTERY_FULL_CHARGED)
+ ret = POWER_SUPPLY_STATUS_FULL;
+ else if (ret & BATTERY_DISCHARGING)
+ ret = POWER_SUPPLY_STATUS_DISCHARGING;
+ else
+ ret = POWER_SUPPLY_STATUS_CHARGING;
+
+ sbs_status_correct(chip->client, &ret);
+
+ if (chip->last_state != ret) {
+ chip->poll_time = 0;
+ power_supply_changed(chip->power_supply);
+ return;
+ }
+ if (chip->poll_time > 0) {
+ schedule_delayed_work(&chip->work, HZ);
+ chip->poll_time--;
+ return;
+ }
+}
+
+static const struct power_supply_desc sbs_default_desc = {
+ .type = POWER_SUPPLY_TYPE_BATTERY,
+ .properties = sbs_properties,
+ .num_properties = ARRAY_SIZE(sbs_properties),
+ .get_property = sbs_get_property,
+ .external_power_changed = sbs_external_power_changed,
+};
+
+static int sbs_probe(struct i2c_client *client)
+{
+ struct sbs_info *chip;
+ struct power_supply_desc *sbs_desc;
+ struct sbs_platform_data *pdata = client->dev.platform_data;
+ struct power_supply_config psy_cfg = {};
+ int rc;
+ int irq;
+
+ sbs_desc = devm_kmemdup(&client->dev, &sbs_default_desc,
+ sizeof(*sbs_desc), GFP_KERNEL);
+ if (!sbs_desc)
+ return -ENOMEM;
+
+ sbs_desc->name = devm_kasprintf(&client->dev, GFP_KERNEL, "sbs-%s",
+ dev_name(&client->dev));
+ if (!sbs_desc->name)
+ return -ENOMEM;
+
+ chip = devm_kzalloc(&client->dev, sizeof(struct sbs_info), GFP_KERNEL);
+ if (!chip)
+ return -ENOMEM;
+
+ chip->flags = (u32)(uintptr_t)device_get_match_data(&client->dev);
+ chip->client = client;
+ psy_cfg.of_node = client->dev.of_node;
+ psy_cfg.drv_data = chip;
+ chip->last_state = POWER_SUPPLY_STATUS_UNKNOWN;
+ mutex_init(&chip->mode_lock);
+
+ /* use pdata if available, fall back to DT properties,
+ * or hardcoded defaults if not
+ */
+ rc = device_property_read_u32(&client->dev, "sbs,i2c-retry-count",
+ &chip->i2c_retry_count);
+ if (rc)
+ chip->i2c_retry_count = 0;
+
+ rc = device_property_read_u32(&client->dev, "sbs,poll-retry-count",
+ &chip->poll_retry_count);
+ if (rc)
+ chip->poll_retry_count = 0;
+
+ if (pdata) {
+ chip->poll_retry_count = pdata->poll_retry_count;
+ chip->i2c_retry_count = pdata->i2c_retry_count;
+ }
+ chip->i2c_retry_count = chip->i2c_retry_count + 1;
+
+ chip->charger_broadcasts = !device_property_read_bool(&client->dev,
+ "sbs,disable-charger-broadcasts");
+
+ chip->gpio_detect = devm_gpiod_get_optional(&client->dev,
+ "sbs,battery-detect", GPIOD_IN);
+ if (IS_ERR(chip->gpio_detect)) {
+ dev_err(&client->dev, "Failed to get gpio: %ld\n",
+ PTR_ERR(chip->gpio_detect));
+ return PTR_ERR(chip->gpio_detect);
+ }
+
+ i2c_set_clientdata(client, chip);
+
+ if (!chip->gpio_detect)
+ goto skip_gpio;
+
+ irq = gpiod_to_irq(chip->gpio_detect);
+ if (irq <= 0) {
+ dev_warn(&client->dev, "Failed to get gpio as irq: %d\n", irq);
+ goto skip_gpio;
+ }
+
+ rc = devm_request_threaded_irq(&client->dev, irq, NULL, sbs_irq,
+ IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
+ dev_name(&client->dev), chip);
+ if (rc) {
+ dev_warn(&client->dev, "Failed to request irq: %d\n", rc);
+ goto skip_gpio;
+ }
+
+skip_gpio:
+ /*
+ * Before we register, we might need to make sure we can actually talk
+ * to the battery.
+ */
+ if (!(force_load || chip->gpio_detect)) {
+ union power_supply_propval val;
+
+ rc = sbs_get_battery_presence_and_health(
+ client, POWER_SUPPLY_PROP_PRESENT, &val);
+ if (rc < 0 || !val.intval) {
+ dev_err(&client->dev, "Failed to get present status\n");
+ rc = -ENODEV;
+ goto exit_psupply;
+ }
+ }
+
+ INIT_DELAYED_WORK(&chip->work, sbs_delayed_work);
+
+ chip->power_supply = devm_power_supply_register(&client->dev, sbs_desc,
+ &psy_cfg);
+ if (IS_ERR(chip->power_supply)) {
+ dev_err(&client->dev,
+ "%s: Failed to register power supply\n", __func__);
+ rc = PTR_ERR(chip->power_supply);
+ goto exit_psupply;
+ }
+
+ dev_info(&client->dev,
+ "%s: battery gas gauge device registered\n", client->name);
+
+ return 0;
+
+exit_psupply:
+ return rc;
+}
+
+static int sbs_remove(struct i2c_client *client)
+{
+ struct sbs_info *chip = i2c_get_clientdata(client);
+
+ cancel_delayed_work_sync(&chip->work);
+
+ return 0;
+}
+
+#if defined CONFIG_PM_SLEEP
+
+static int sbs_suspend(struct device *dev)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct sbs_info *chip = i2c_get_clientdata(client);
+ int ret;
+
+ if (chip->poll_time > 0)
+ cancel_delayed_work_sync(&chip->work);
+
+ if (chip->flags & SBS_FLAGS_TI_BQ20ZX5) {
+ /* Write to manufacturer access with sleep command. */
+ ret = sbs_write_word_data(client,
+ sbs_data[REG_MANUFACTURER_DATA].addr,
+ MANUFACTURER_ACCESS_SLEEP);
+ if (chip->is_present && ret < 0)
+ return ret;
+ }
+
+ return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(sbs_pm_ops, sbs_suspend, NULL);
+#define SBS_PM_OPS (&sbs_pm_ops)
+
+#else
+#define SBS_PM_OPS NULL
+#endif
+
+static const struct i2c_device_id sbs_id[] = {
+ { "bq20z65", 0 },
+ { "bq20z75", 0 },
+ { "sbs-battery", 1 },
+ {}
+};
+MODULE_DEVICE_TABLE(i2c, sbs_id);
+
+static const struct of_device_id sbs_dt_ids[] = {
+ { .compatible = "sbs,sbs-battery" },
+ {
+ .compatible = "ti,bq20z65",
+ .data = (void *)SBS_FLAGS_TI_BQ20ZX5,
+ },
+ {
+ .compatible = "ti,bq20z75",
+ .data = (void *)SBS_FLAGS_TI_BQ20ZX5,
+ },
+ { }
+};
+MODULE_DEVICE_TABLE(of, sbs_dt_ids);
+
+static struct i2c_driver sbs_battery_driver = {
+ .probe_new = sbs_probe,
+ .remove = sbs_remove,
+ .alert = sbs_alert,
+ .id_table = sbs_id,
+ .driver = {
+ .name = "sbs-battery",
+ .of_match_table = sbs_dt_ids,
+ .pm = SBS_PM_OPS,
+ },
+};
+module_i2c_driver(sbs_battery_driver);
+
+MODULE_DESCRIPTION("SBS battery monitor driver");
+MODULE_LICENSE("GPL");
+
+module_param(force_load, bool, 0444);
+MODULE_PARM_DESC(force_load,
+ "Attempt to load the driver even if no battery is connected");
diff --git a/drivers/power/supply/sbs-charger.c b/drivers/power/supply/sbs-charger.c
new file mode 100644
index 000000000..a30eb42e3
--- /dev/null
+++ b/drivers/power/supply/sbs-charger.c
@@ -0,0 +1,267 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (c) 2016, Prodys S.L.
+ *
+ * This adds support for sbs-charger compilant chips as defined here:
+ * http://sbs-forum.org/specs/sbc110.pdf
+ *
+ * Implemetation based on sbs-battery.c
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/err.h>
+#include <linux/power_supply.h>
+#include <linux/i2c.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/gpio.h>
+#include <linux/regmap.h>
+#include <linux/of_gpio.h>
+#include <linux/bitops.h>
+
+#define SBS_CHARGER_REG_SPEC_INFO 0x11
+#define SBS_CHARGER_REG_STATUS 0x13
+#define SBS_CHARGER_REG_ALARM_WARNING 0x16
+
+#define SBS_CHARGER_STATUS_CHARGE_INHIBITED BIT(0)
+#define SBS_CHARGER_STATUS_RES_COLD BIT(9)
+#define SBS_CHARGER_STATUS_RES_HOT BIT(10)
+#define SBS_CHARGER_STATUS_BATTERY_PRESENT BIT(14)
+#define SBS_CHARGER_STATUS_AC_PRESENT BIT(15)
+
+#define SBS_CHARGER_POLL_TIME 500
+
+struct sbs_info {
+ struct i2c_client *client;
+ struct power_supply *power_supply;
+ struct regmap *regmap;
+ struct delayed_work work;
+ unsigned int last_state;
+};
+
+static int sbs_get_property(struct power_supply *psy,
+ enum power_supply_property psp,
+ union power_supply_propval *val)
+{
+ struct sbs_info *chip = power_supply_get_drvdata(psy);
+ unsigned int reg;
+
+ reg = chip->last_state;
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_PRESENT:
+ val->intval = !!(reg & SBS_CHARGER_STATUS_BATTERY_PRESENT);
+ break;
+
+ case POWER_SUPPLY_PROP_ONLINE:
+ val->intval = !!(reg & SBS_CHARGER_STATUS_AC_PRESENT);
+ break;
+
+ case POWER_SUPPLY_PROP_STATUS:
+ val->intval = POWER_SUPPLY_STATUS_UNKNOWN;
+
+ if (!(reg & SBS_CHARGER_STATUS_BATTERY_PRESENT))
+ val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING;
+ else if (reg & SBS_CHARGER_STATUS_AC_PRESENT &&
+ !(reg & SBS_CHARGER_STATUS_CHARGE_INHIBITED))
+ val->intval = POWER_SUPPLY_STATUS_CHARGING;
+ else
+ val->intval = POWER_SUPPLY_STATUS_DISCHARGING;
+
+ break;
+
+ case POWER_SUPPLY_PROP_HEALTH:
+ if (reg & SBS_CHARGER_STATUS_RES_COLD)
+ val->intval = POWER_SUPPLY_HEALTH_COLD;
+ if (reg & SBS_CHARGER_STATUS_RES_HOT)
+ val->intval = POWER_SUPPLY_HEALTH_OVERHEAT;
+ else
+ val->intval = POWER_SUPPLY_HEALTH_GOOD;
+
+ break;
+
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int sbs_check_state(struct sbs_info *chip)
+{
+ unsigned int reg;
+ int ret;
+
+ ret = regmap_read(chip->regmap, SBS_CHARGER_REG_STATUS, &reg);
+ if (!ret && reg != chip->last_state) {
+ chip->last_state = reg;
+ power_supply_changed(chip->power_supply);
+ return 1;
+ }
+
+ return 0;
+}
+
+static void sbs_delayed_work(struct work_struct *work)
+{
+ struct sbs_info *chip = container_of(work, struct sbs_info, work.work);
+
+ sbs_check_state(chip);
+
+ schedule_delayed_work(&chip->work,
+ msecs_to_jiffies(SBS_CHARGER_POLL_TIME));
+}
+
+static irqreturn_t sbs_irq_thread(int irq, void *data)
+{
+ struct sbs_info *chip = data;
+ int ret;
+
+ ret = sbs_check_state(chip);
+
+ return ret ? IRQ_HANDLED : IRQ_NONE;
+}
+
+static enum power_supply_property sbs_properties[] = {
+ POWER_SUPPLY_PROP_STATUS,
+ POWER_SUPPLY_PROP_PRESENT,
+ POWER_SUPPLY_PROP_ONLINE,
+ POWER_SUPPLY_PROP_HEALTH,
+};
+
+static bool sbs_readable_reg(struct device *dev, unsigned int reg)
+{
+ return reg >= SBS_CHARGER_REG_SPEC_INFO;
+}
+
+static bool sbs_volatile_reg(struct device *dev, unsigned int reg)
+{
+ switch (reg) {
+ case SBS_CHARGER_REG_STATUS:
+ return true;
+ }
+
+ return false;
+}
+
+static const struct regmap_config sbs_regmap = {
+ .reg_bits = 8,
+ .val_bits = 16,
+ .max_register = SBS_CHARGER_REG_ALARM_WARNING,
+ .readable_reg = sbs_readable_reg,
+ .volatile_reg = sbs_volatile_reg,
+ .val_format_endian = REGMAP_ENDIAN_LITTLE, /* since based on SMBus */
+};
+
+static const struct power_supply_desc sbs_desc = {
+ .name = "sbs-charger",
+ .type = POWER_SUPPLY_TYPE_MAINS,
+ .properties = sbs_properties,
+ .num_properties = ARRAY_SIZE(sbs_properties),
+ .get_property = sbs_get_property,
+};
+
+static int sbs_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct power_supply_config psy_cfg = {};
+ struct sbs_info *chip;
+ int ret, val;
+
+ chip = devm_kzalloc(&client->dev, sizeof(struct sbs_info), GFP_KERNEL);
+ if (!chip)
+ return -ENOMEM;
+
+ chip->client = client;
+ psy_cfg.of_node = client->dev.of_node;
+ psy_cfg.drv_data = chip;
+
+ i2c_set_clientdata(client, chip);
+
+ chip->regmap = devm_regmap_init_i2c(client, &sbs_regmap);
+ if (IS_ERR(chip->regmap))
+ return PTR_ERR(chip->regmap);
+
+ /*
+ * Before we register, we need to make sure we can actually talk
+ * to the battery.
+ */
+ ret = regmap_read(chip->regmap, SBS_CHARGER_REG_STATUS, &val);
+ if (ret) {
+ dev_err(&client->dev, "Failed to get device status\n");
+ return ret;
+ }
+ chip->last_state = val;
+
+ chip->power_supply = devm_power_supply_register(&client->dev, &sbs_desc,
+ &psy_cfg);
+ if (IS_ERR(chip->power_supply)) {
+ dev_err(&client->dev, "Failed to register power supply\n");
+ return PTR_ERR(chip->power_supply);
+ }
+
+ /*
+ * The sbs-charger spec doesn't impose the use of an interrupt. So in
+ * the case it wasn't provided we use polling in order get the charger's
+ * status.
+ */
+ if (client->irq) {
+ ret = devm_request_threaded_irq(&client->dev, client->irq,
+ NULL, sbs_irq_thread,
+ IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
+ dev_name(&client->dev), chip);
+ if (ret) {
+ dev_err(&client->dev, "Failed to request irq, %d\n", ret);
+ return ret;
+ }
+ } else {
+ INIT_DELAYED_WORK(&chip->work, sbs_delayed_work);
+ schedule_delayed_work(&chip->work,
+ msecs_to_jiffies(SBS_CHARGER_POLL_TIME));
+ }
+
+ dev_info(&client->dev,
+ "%s: smart charger device registered\n", client->name);
+
+ return 0;
+}
+
+static int sbs_remove(struct i2c_client *client)
+{
+ struct sbs_info *chip = i2c_get_clientdata(client);
+
+ cancel_delayed_work_sync(&chip->work);
+
+ return 0;
+}
+
+#ifdef CONFIG_OF
+static const struct of_device_id sbs_dt_ids[] = {
+ { .compatible = "sbs,sbs-charger" },
+ { },
+};
+MODULE_DEVICE_TABLE(of, sbs_dt_ids);
+#endif
+
+static const struct i2c_device_id sbs_id[] = {
+ { "sbs-charger", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, sbs_id);
+
+static struct i2c_driver sbs_driver = {
+ .probe = sbs_probe,
+ .remove = sbs_remove,
+ .id_table = sbs_id,
+ .driver = {
+ .name = "sbs-charger",
+ .of_match_table = of_match_ptr(sbs_dt_ids),
+ },
+};
+module_i2c_driver(sbs_driver);
+
+MODULE_AUTHOR("Nicolas Saenz Julienne <nicolassaenzj@gmail.com>");
+MODULE_DESCRIPTION("SBS smart charger driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/power/supply/sbs-manager.c b/drivers/power/supply/sbs-manager.c
new file mode 100644
index 000000000..666243d9d
--- /dev/null
+++ b/drivers/power/supply/sbs-manager.c
@@ -0,0 +1,442 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Driver for SBS compliant Smart Battery System Managers
+ *
+ * The device communicates via i2c at address 0x0a and multiplexes access to up
+ * to four smart batteries at address 0x0b.
+ *
+ * Via sysfs interface the online state and charge type are presented.
+ *
+ * Datasheet SBSM: http://sbs-forum.org/specs/sbsm100b.pdf
+ * Datasheet LTC1760: http://cds.linear.com/docs/en/datasheet/1760fb.pdf
+ *
+ * Karl-Heinz Schneider <karl-heinz@schneider-inet.de>
+ */
+
+#include <linux/gpio.h>
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/i2c-mux.h>
+#include <linux/power_supply.h>
+#include <linux/property.h>
+
+#define SBSM_MAX_BATS 4
+#define SBSM_RETRY_CNT 3
+
+/* registers addresses */
+#define SBSM_CMD_BATSYSSTATE 0x01
+#define SBSM_CMD_BATSYSSTATECONT 0x02
+#define SBSM_CMD_BATSYSINFO 0x04
+#define SBSM_CMD_LTC 0x3c
+
+#define SBSM_MASK_BAT_SUPPORTED GENMASK(3, 0)
+#define SBSM_MASK_CHARGE_BAT GENMASK(7, 4)
+#define SBSM_BIT_AC_PRESENT BIT(0)
+#define SBSM_BIT_TURBO BIT(7)
+
+#define SBSM_SMB_BAT_OFFSET 11
+struct sbsm_data {
+ struct i2c_client *client;
+ struct i2c_mux_core *muxc;
+
+ struct power_supply *psy;
+
+ u8 cur_chan; /* currently selected channel */
+ struct gpio_chip chip;
+ bool is_ltc1760; /* special capabilities */
+
+ unsigned int supported_bats;
+ unsigned int last_state;
+ unsigned int last_state_cont;
+};
+
+static enum power_supply_property sbsm_props[] = {
+ POWER_SUPPLY_PROP_ONLINE,
+ POWER_SUPPLY_PROP_CHARGE_TYPE,
+};
+
+static int sbsm_read_word(struct i2c_client *client, u8 address)
+{
+ int reg, retries;
+
+ for (retries = SBSM_RETRY_CNT; retries > 0; retries--) {
+ reg = i2c_smbus_read_word_data(client, address);
+ if (reg >= 0)
+ break;
+ }
+
+ if (reg < 0) {
+ dev_err(&client->dev, "failed to read register 0x%02x\n",
+ address);
+ }
+
+ return reg;
+}
+
+static int sbsm_write_word(struct i2c_client *client, u8 address, u16 word)
+{
+ int ret, retries;
+
+ for (retries = SBSM_RETRY_CNT; retries > 0; retries--) {
+ ret = i2c_smbus_write_word_data(client, address, word);
+ if (ret >= 0)
+ break;
+ }
+ if (ret < 0)
+ dev_err(&client->dev, "failed to write to register 0x%02x\n",
+ address);
+
+ return ret;
+}
+
+static int sbsm_get_property(struct power_supply *psy,
+ enum power_supply_property psp,
+ union power_supply_propval *val)
+{
+ struct sbsm_data *data = power_supply_get_drvdata(psy);
+ int regval = 0;
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_ONLINE:
+ regval = sbsm_read_word(data->client, SBSM_CMD_BATSYSSTATECONT);
+ if (regval < 0)
+ return regval;
+ val->intval = !!(regval & SBSM_BIT_AC_PRESENT);
+ break;
+
+ case POWER_SUPPLY_PROP_CHARGE_TYPE:
+ regval = sbsm_read_word(data->client, SBSM_CMD_BATSYSSTATE);
+ if (regval < 0)
+ return regval;
+
+ if ((regval & SBSM_MASK_CHARGE_BAT) == 0) {
+ val->intval = POWER_SUPPLY_CHARGE_TYPE_NONE;
+ return 0;
+ }
+ val->intval = POWER_SUPPLY_CHARGE_TYPE_TRICKLE;
+
+ if (data->is_ltc1760) {
+ /* charge mode fast if turbo is active */
+ regval = sbsm_read_word(data->client, SBSM_CMD_LTC);
+ if (regval < 0)
+ return regval;
+ else if (regval & SBSM_BIT_TURBO)
+ val->intval = POWER_SUPPLY_CHARGE_TYPE_FAST;
+ }
+ break;
+
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int sbsm_prop_is_writeable(struct power_supply *psy,
+ enum power_supply_property psp)
+{
+ struct sbsm_data *data = power_supply_get_drvdata(psy);
+
+ return (psp == POWER_SUPPLY_PROP_CHARGE_TYPE) && data->is_ltc1760;
+}
+
+static int sbsm_set_property(struct power_supply *psy,
+ enum power_supply_property psp,
+ const union power_supply_propval *val)
+{
+ struct sbsm_data *data = power_supply_get_drvdata(psy);
+ int ret = -EINVAL;
+ u16 regval;
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_CHARGE_TYPE:
+ /* write 1 to TURBO if type fast is given */
+ if (!data->is_ltc1760)
+ break;
+ regval = val->intval ==
+ POWER_SUPPLY_CHARGE_TYPE_FAST ? SBSM_BIT_TURBO : 0;
+ ret = sbsm_write_word(data->client, SBSM_CMD_LTC, regval);
+ break;
+
+ default:
+ break;
+ }
+
+ return ret;
+}
+
+/*
+ * Switch to battery
+ * Parameter chan is directly the content of SMB_BAT* nibble
+ */
+static int sbsm_select(struct i2c_mux_core *muxc, u32 chan)
+{
+ struct sbsm_data *data = i2c_mux_priv(muxc);
+ struct device *dev = &data->client->dev;
+ int ret = 0;
+ u16 reg;
+
+ if (data->cur_chan == chan)
+ return ret;
+
+ /* chan goes from 1 ... 4 */
+ reg = BIT(SBSM_SMB_BAT_OFFSET + chan);
+ ret = sbsm_write_word(data->client, SBSM_CMD_BATSYSSTATE, reg);
+ if (ret)
+ dev_err(dev, "Failed to select channel %i\n", chan);
+ else
+ data->cur_chan = chan;
+
+ return ret;
+}
+
+static int sbsm_gpio_get_value(struct gpio_chip *gc, unsigned int off)
+{
+ struct sbsm_data *data = gpiochip_get_data(gc);
+ int ret;
+
+ ret = sbsm_read_word(data->client, SBSM_CMD_BATSYSSTATE);
+ if (ret < 0)
+ return ret;
+
+ return ret & BIT(off);
+}
+
+/*
+ * This needs to be defined or the GPIO lib fails to register the pin.
+ * But the 'gpio' is always an input.
+ */
+static int sbsm_gpio_direction_input(struct gpio_chip *gc, unsigned int off)
+{
+ return 0;
+}
+
+static int sbsm_do_alert(struct device *dev, void *d)
+{
+ struct i2c_client *client = i2c_verify_client(dev);
+ struct i2c_driver *driver;
+
+ if (!client || client->addr != 0x0b)
+ return 0;
+
+ device_lock(dev);
+ if (client->dev.driver) {
+ driver = to_i2c_driver(client->dev.driver);
+ if (driver->alert)
+ driver->alert(client, I2C_PROTOCOL_SMBUS_ALERT, 0);
+ else
+ dev_warn(&client->dev, "no driver alert()!\n");
+ } else {
+ dev_dbg(&client->dev, "alert with no driver\n");
+ }
+ device_unlock(dev);
+
+ return -EBUSY;
+}
+
+static void sbsm_alert(struct i2c_client *client, enum i2c_alert_protocol prot,
+ unsigned int d)
+{
+ struct sbsm_data *sbsm = i2c_get_clientdata(client);
+
+ int ret, i, irq_bat = 0, state = 0;
+
+ ret = sbsm_read_word(sbsm->client, SBSM_CMD_BATSYSSTATE);
+ if (ret >= 0) {
+ irq_bat = ret ^ sbsm->last_state;
+ sbsm->last_state = ret;
+ state = ret;
+ }
+
+ ret = sbsm_read_word(sbsm->client, SBSM_CMD_BATSYSSTATECONT);
+ if ((ret >= 0) &&
+ ((ret ^ sbsm->last_state_cont) & SBSM_BIT_AC_PRESENT)) {
+ irq_bat |= sbsm->supported_bats & state;
+ power_supply_changed(sbsm->psy);
+ }
+ sbsm->last_state_cont = ret;
+
+ for (i = 0; i < SBSM_MAX_BATS; i++) {
+ if (irq_bat & BIT(i)) {
+ device_for_each_child(&sbsm->muxc->adapter[i]->dev,
+ NULL, sbsm_do_alert);
+ }
+ }
+}
+
+static int sbsm_gpio_setup(struct sbsm_data *data)
+{
+ struct gpio_chip *gc = &data->chip;
+ struct i2c_client *client = data->client;
+ struct device *dev = &client->dev;
+ int ret;
+
+ if (!device_property_present(dev, "gpio-controller"))
+ return 0;
+
+ ret = sbsm_read_word(client, SBSM_CMD_BATSYSSTATE);
+ if (ret < 0)
+ return ret;
+ data->last_state = ret;
+
+ ret = sbsm_read_word(client, SBSM_CMD_BATSYSSTATECONT);
+ if (ret < 0)
+ return ret;
+ data->last_state_cont = ret;
+
+ gc->get = sbsm_gpio_get_value;
+ gc->direction_input = sbsm_gpio_direction_input;
+ gc->can_sleep = true;
+ gc->base = -1;
+ gc->ngpio = SBSM_MAX_BATS;
+ gc->label = client->name;
+ gc->parent = dev;
+ gc->owner = THIS_MODULE;
+
+ ret = devm_gpiochip_add_data(dev, gc, data);
+ if (ret) {
+ dev_err(dev, "devm_gpiochip_add_data failed: %d\n", ret);
+ return ret;
+ }
+
+ return ret;
+}
+
+static const struct power_supply_desc sbsm_default_psy_desc = {
+ .type = POWER_SUPPLY_TYPE_MAINS,
+ .properties = sbsm_props,
+ .num_properties = ARRAY_SIZE(sbsm_props),
+ .get_property = &sbsm_get_property,
+ .set_property = &sbsm_set_property,
+ .property_is_writeable = &sbsm_prop_is_writeable,
+};
+
+static int sbsm_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct i2c_adapter *adapter = client->adapter;
+ struct sbsm_data *data;
+ struct device *dev = &client->dev;
+ struct power_supply_desc *psy_desc;
+ struct power_supply_config psy_cfg = {};
+ int ret = 0, i;
+
+ /* Device listens only at address 0x0a */
+ if (client->addr != 0x0a)
+ return -EINVAL;
+
+ if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_WORD_DATA))
+ return -EPFNOSUPPORT;
+
+ data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
+
+ i2c_set_clientdata(client, data);
+
+ data->client = client;
+ data->is_ltc1760 = !!strstr(id->name, "ltc1760");
+
+ ret = sbsm_read_word(client, SBSM_CMD_BATSYSINFO);
+ if (ret < 0)
+ return ret;
+ data->supported_bats = ret & SBSM_MASK_BAT_SUPPORTED;
+ data->muxc = i2c_mux_alloc(adapter, dev, SBSM_MAX_BATS, 0,
+ I2C_MUX_LOCKED, &sbsm_select, NULL);
+ if (!data->muxc) {
+ dev_err(dev, "failed to alloc i2c mux\n");
+ ret = -ENOMEM;
+ goto err_mux_alloc;
+ }
+ data->muxc->priv = data;
+
+ /* register muxed i2c channels. One for each supported battery */
+ for (i = 0; i < SBSM_MAX_BATS; ++i) {
+ if (data->supported_bats & BIT(i)) {
+ ret = i2c_mux_add_adapter(data->muxc, 0, i + 1, 0);
+ if (ret)
+ break;
+ }
+ }
+ if (ret) {
+ dev_err(dev, "failed to register i2c mux channel %d\n", i + 1);
+ goto err_mux_register;
+ }
+
+ psy_desc = devm_kmemdup(dev, &sbsm_default_psy_desc,
+ sizeof(struct power_supply_desc),
+ GFP_KERNEL);
+ if (!psy_desc) {
+ ret = -ENOMEM;
+ goto err_psy;
+ }
+
+ psy_desc->name = devm_kasprintf(dev, GFP_KERNEL, "sbsm-%s",
+ dev_name(&client->dev));
+ if (!psy_desc->name) {
+ ret = -ENOMEM;
+ goto err_psy;
+ }
+ ret = sbsm_gpio_setup(data);
+ if (ret < 0)
+ goto err_psy;
+
+ psy_cfg.drv_data = data;
+ psy_cfg.of_node = dev->of_node;
+ data->psy = devm_power_supply_register(dev, psy_desc, &psy_cfg);
+ if (IS_ERR(data->psy)) {
+ ret = PTR_ERR(data->psy);
+ dev_err(dev, "failed to register power supply %s\n",
+ psy_desc->name);
+ goto err_psy;
+ }
+
+ return 0;
+
+err_psy:
+err_mux_register:
+ i2c_mux_del_adapters(data->muxc);
+
+err_mux_alloc:
+ return ret;
+}
+
+static int sbsm_remove(struct i2c_client *client)
+{
+ struct sbsm_data *data = i2c_get_clientdata(client);
+
+ i2c_mux_del_adapters(data->muxc);
+ return 0;
+}
+
+static const struct i2c_device_id sbsm_ids[] = {
+ { "sbs-manager", 0 },
+ { "ltc1760", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, sbsm_ids);
+
+#ifdef CONFIG_OF
+static const struct of_device_id sbsm_dt_ids[] = {
+ { .compatible = "sbs,sbs-manager" },
+ { .compatible = "lltc,ltc1760" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, sbsm_dt_ids);
+#endif
+
+static struct i2c_driver sbsm_driver = {
+ .driver = {
+ .name = "sbsm",
+ .of_match_table = of_match_ptr(sbsm_dt_ids),
+ },
+ .probe = sbsm_probe,
+ .remove = sbsm_remove,
+ .alert = sbsm_alert,
+ .id_table = sbsm_ids
+};
+module_i2c_driver(sbsm_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Karl-Heinz Schneider <karl-heinz@schneider-inet.de>");
+MODULE_DESCRIPTION("SBSM Smart Battery System Manager");
diff --git a/drivers/power/supply/sc2731_charger.c b/drivers/power/supply/sc2731_charger.c
new file mode 100644
index 000000000..288b79836
--- /dev/null
+++ b/drivers/power/supply/sc2731_charger.c
@@ -0,0 +1,541 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (C) 2018 Spreadtrum Communications Inc.
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/power_supply.h>
+#include <linux/usb/phy.h>
+#include <linux/regmap.h>
+#include <linux/notifier.h>
+#include <linux/of.h>
+
+/* PMIC global registers definition */
+#define SC2731_CHARGE_STATUS 0xedc
+#define SC2731_CHARGE_FULL BIT(4)
+#define SC2731_MODULE_EN1 0xc0c
+#define SC2731_CHARGE_EN BIT(5)
+
+/* SC2731 switch charger registers definition */
+#define SC2731_CHG_CFG0 0x0
+#define SC2731_CHG_CFG1 0x4
+#define SC2731_CHG_CFG2 0x8
+#define SC2731_CHG_CFG3 0xc
+#define SC2731_CHG_CFG4 0x10
+#define SC2731_CHG_CFG5 0x28
+
+/* SC2731_CHG_CFG0 register definition */
+#define SC2731_PRECHG_RNG_SHIFT 11
+#define SC2731_PRECHG_RNG_MASK GENMASK(12, 11)
+
+#define SC2731_TERMINATION_VOL_MASK GENMASK(2, 1)
+#define SC2731_TERMINATION_VOL_SHIFT 1
+#define SC2731_TERMINATION_VOL_CAL_MASK GENMASK(8, 3)
+#define SC2731_TERMINATION_VOL_CAL_SHIFT 3
+#define SC2731_TERMINATION_CUR_MASK GENMASK(2, 0)
+
+#define SC2731_CC_EN BIT(13)
+#define SC2731_CHARGER_PD BIT(0)
+
+/* SC2731_CHG_CFG1 register definition */
+#define SC2731_CUR_MASK GENMASK(5, 0)
+
+/* SC2731_CHG_CFG5 register definition */
+#define SC2731_CUR_LIMIT_SHIFT 8
+#define SC2731_CUR_LIMIT_MASK GENMASK(9, 8)
+
+/* Default current definition (unit is mA) */
+#define SC2731_CURRENT_LIMIT_100 100
+#define SC2731_CURRENT_LIMIT_500 500
+#define SC2731_CURRENT_LIMIT_900 900
+#define SC2731_CURRENT_LIMIT_2000 2000
+#define SC2731_CURRENT_PRECHG 450
+#define SC2731_CURRENT_STEP 50
+
+struct sc2731_charger_info {
+ struct device *dev;
+ struct regmap *regmap;
+ struct usb_phy *usb_phy;
+ struct notifier_block usb_notify;
+ struct power_supply *psy_usb;
+ struct work_struct work;
+ struct mutex lock;
+ bool charging;
+ u32 base;
+ u32 limit;
+};
+
+static void sc2731_charger_stop_charge(struct sc2731_charger_info *info)
+{
+ regmap_update_bits(info->regmap, info->base + SC2731_CHG_CFG0,
+ SC2731_CC_EN, 0);
+
+ regmap_update_bits(info->regmap, info->base + SC2731_CHG_CFG0,
+ SC2731_CHARGER_PD, SC2731_CHARGER_PD);
+}
+
+static int sc2731_charger_start_charge(struct sc2731_charger_info *info)
+{
+ int ret;
+
+ /* Enable charger constant current mode */
+ ret = regmap_update_bits(info->regmap, info->base + SC2731_CHG_CFG0,
+ SC2731_CC_EN, SC2731_CC_EN);
+ if (ret)
+ return ret;
+
+ /* Start charging */
+ return regmap_update_bits(info->regmap, info->base + SC2731_CHG_CFG0,
+ SC2731_CHARGER_PD, 0);
+}
+
+static int sc2731_charger_set_current_limit(struct sc2731_charger_info *info,
+ u32 limit)
+{
+ u32 val;
+
+ if (limit <= SC2731_CURRENT_LIMIT_100)
+ val = 0;
+ else if (limit <= SC2731_CURRENT_LIMIT_500)
+ val = 3;
+ else if (limit <= SC2731_CURRENT_LIMIT_900)
+ val = 2;
+ else
+ val = 1;
+
+ return regmap_update_bits(info->regmap, info->base + SC2731_CHG_CFG5,
+ SC2731_CUR_LIMIT_MASK,
+ val << SC2731_CUR_LIMIT_SHIFT);
+}
+
+static int sc2731_charger_set_current(struct sc2731_charger_info *info, u32 cur)
+{
+ u32 val;
+ int ret;
+
+ if (cur > SC2731_CURRENT_LIMIT_2000)
+ cur = SC2731_CURRENT_LIMIT_2000;
+ else if (cur < SC2731_CURRENT_PRECHG)
+ cur = SC2731_CURRENT_PRECHG;
+
+ /* Calculate the step value, each step is 50 mA */
+ val = (cur - SC2731_CURRENT_PRECHG) / SC2731_CURRENT_STEP;
+
+ /* Set pre-charge current as 450 mA */
+ ret = regmap_update_bits(info->regmap, info->base + SC2731_CHG_CFG0,
+ SC2731_PRECHG_RNG_MASK,
+ 0x3 << SC2731_PRECHG_RNG_SHIFT);
+ if (ret)
+ return ret;
+
+ return regmap_update_bits(info->regmap, info->base + SC2731_CHG_CFG1,
+ SC2731_CUR_MASK, val);
+}
+
+static int sc2731_charger_get_status(struct sc2731_charger_info *info)
+{
+ u32 val;
+ int ret;
+
+ ret = regmap_read(info->regmap, SC2731_CHARGE_STATUS, &val);
+ if (ret)
+ return ret;
+
+ if (val & SC2731_CHARGE_FULL)
+ return POWER_SUPPLY_STATUS_FULL;
+
+ return POWER_SUPPLY_STATUS_CHARGING;
+}
+
+static int sc2731_charger_get_current(struct sc2731_charger_info *info,
+ u32 *cur)
+{
+ int ret;
+ u32 val;
+
+ ret = regmap_read(info->regmap, info->base + SC2731_CHG_CFG1, &val);
+ if (ret)
+ return ret;
+
+ val &= SC2731_CUR_MASK;
+ *cur = val * SC2731_CURRENT_STEP + SC2731_CURRENT_PRECHG;
+
+ return 0;
+}
+
+static int sc2731_charger_get_current_limit(struct sc2731_charger_info *info,
+ u32 *cur)
+{
+ int ret;
+ u32 val;
+
+ ret = regmap_read(info->regmap, info->base + SC2731_CHG_CFG5, &val);
+ if (ret)
+ return ret;
+
+ val = (val & SC2731_CUR_LIMIT_MASK) >> SC2731_CUR_LIMIT_SHIFT;
+
+ switch (val) {
+ case 0:
+ *cur = SC2731_CURRENT_LIMIT_100;
+ break;
+
+ case 1:
+ *cur = SC2731_CURRENT_LIMIT_2000;
+ break;
+
+ case 2:
+ *cur = SC2731_CURRENT_LIMIT_900;
+ break;
+
+ case 3:
+ *cur = SC2731_CURRENT_LIMIT_500;
+ break;
+
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int
+sc2731_charger_usb_set_property(struct power_supply *psy,
+ enum power_supply_property psp,
+ const union power_supply_propval *val)
+{
+ struct sc2731_charger_info *info = power_supply_get_drvdata(psy);
+ int ret;
+
+ mutex_lock(&info->lock);
+
+ if (!info->charging) {
+ mutex_unlock(&info->lock);
+ return -ENODEV;
+ }
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT:
+ ret = sc2731_charger_set_current(info, val->intval / 1000);
+ if (ret < 0)
+ dev_err(info->dev, "set charge current failed\n");
+ break;
+
+ case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT:
+ ret = sc2731_charger_set_current_limit(info,
+ val->intval / 1000);
+ if (ret < 0)
+ dev_err(info->dev, "set input current limit failed\n");
+ break;
+
+ default:
+ ret = -EINVAL;
+ }
+
+ mutex_unlock(&info->lock);
+ return ret;
+}
+
+static int sc2731_charger_usb_get_property(struct power_supply *psy,
+ enum power_supply_property psp,
+ union power_supply_propval *val)
+{
+ struct sc2731_charger_info *info = power_supply_get_drvdata(psy);
+ int ret = 0;
+ u32 cur;
+
+ mutex_lock(&info->lock);
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_STATUS:
+ if (info->charging)
+ val->intval = sc2731_charger_get_status(info);
+ else
+ val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING;
+ break;
+
+ case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT:
+ if (!info->charging) {
+ val->intval = 0;
+ } else {
+ ret = sc2731_charger_get_current(info, &cur);
+ if (ret)
+ goto out;
+
+ val->intval = cur * 1000;
+ }
+ break;
+
+ case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT:
+ if (!info->charging) {
+ val->intval = 0;
+ } else {
+ ret = sc2731_charger_get_current_limit(info, &cur);
+ if (ret)
+ goto out;
+
+ val->intval = cur * 1000;
+ }
+ break;
+
+ default:
+ ret = -EINVAL;
+ }
+
+out:
+ mutex_unlock(&info->lock);
+ return ret;
+}
+
+static int sc2731_charger_property_is_writeable(struct power_supply *psy,
+ enum power_supply_property psp)
+{
+ int ret;
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT:
+ case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT:
+ ret = 1;
+ break;
+
+ default:
+ ret = 0;
+ }
+
+ return ret;
+}
+
+static enum power_supply_property sc2731_usb_props[] = {
+ POWER_SUPPLY_PROP_STATUS,
+ POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT,
+ POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT,
+};
+
+static const struct power_supply_desc sc2731_charger_desc = {
+ .name = "sc2731_charger",
+ .type = POWER_SUPPLY_TYPE_USB,
+ .properties = sc2731_usb_props,
+ .num_properties = ARRAY_SIZE(sc2731_usb_props),
+ .get_property = sc2731_charger_usb_get_property,
+ .set_property = sc2731_charger_usb_set_property,
+ .property_is_writeable = sc2731_charger_property_is_writeable,
+};
+
+static void sc2731_charger_work(struct work_struct *data)
+{
+ struct sc2731_charger_info *info =
+ container_of(data, struct sc2731_charger_info, work);
+ int ret;
+
+ mutex_lock(&info->lock);
+
+ if (info->limit > 0 && !info->charging) {
+ /* set current limitation and start to charge */
+ ret = sc2731_charger_set_current_limit(info, info->limit);
+ if (ret)
+ goto out;
+
+ ret = sc2731_charger_set_current(info, info->limit);
+ if (ret)
+ goto out;
+
+ ret = sc2731_charger_start_charge(info);
+ if (ret)
+ goto out;
+
+ info->charging = true;
+ } else if (!info->limit && info->charging) {
+ /* Stop charging */
+ info->charging = false;
+ sc2731_charger_stop_charge(info);
+ }
+
+out:
+ mutex_unlock(&info->lock);
+}
+
+static int sc2731_charger_usb_change(struct notifier_block *nb,
+ unsigned long limit, void *data)
+{
+ struct sc2731_charger_info *info =
+ container_of(nb, struct sc2731_charger_info, usb_notify);
+
+ info->limit = limit;
+
+ schedule_work(&info->work);
+
+ return NOTIFY_OK;
+}
+
+static int sc2731_charger_hw_init(struct sc2731_charger_info *info)
+{
+ struct power_supply_battery_info bat_info = { };
+ u32 term_currrent, term_voltage, cur_val, vol_val;
+ int ret;
+
+ /* Enable charger module */
+ ret = regmap_update_bits(info->regmap, SC2731_MODULE_EN1,
+ SC2731_CHARGE_EN, SC2731_CHARGE_EN);
+ if (ret)
+ return ret;
+
+ ret = power_supply_get_battery_info(info->psy_usb, &bat_info);
+ if (ret) {
+ dev_warn(info->dev, "no battery information is supplied\n");
+
+ /*
+ * If no battery information is supplied, we should set
+ * default charge termination current to 120 mA, and default
+ * charge termination voltage to 4.35V.
+ */
+ cur_val = 0x2;
+ vol_val = 0x1;
+ } else {
+ term_currrent = bat_info.charge_term_current_ua / 1000;
+
+ if (term_currrent <= 90)
+ cur_val = 0;
+ else if (term_currrent >= 265)
+ cur_val = 0x7;
+ else
+ cur_val = ((term_currrent - 90) / 25) + 1;
+
+ term_voltage = bat_info.constant_charge_voltage_max_uv / 1000;
+
+ if (term_voltage > 4500)
+ term_voltage = 4500;
+
+ if (term_voltage > 4200)
+ vol_val = (term_voltage - 4200) / 100;
+ else
+ vol_val = 0;
+
+ power_supply_put_battery_info(info->psy_usb, &bat_info);
+ }
+
+ /* Set charge termination current */
+ ret = regmap_update_bits(info->regmap, info->base + SC2731_CHG_CFG2,
+ SC2731_TERMINATION_CUR_MASK, cur_val);
+ if (ret)
+ goto error;
+
+ /* Set charge termination voltage */
+ ret = regmap_update_bits(info->regmap, info->base + SC2731_CHG_CFG0,
+ SC2731_TERMINATION_VOL_MASK |
+ SC2731_TERMINATION_VOL_CAL_MASK,
+ (vol_val << SC2731_TERMINATION_VOL_SHIFT) |
+ (0x6 << SC2731_TERMINATION_VOL_CAL_SHIFT));
+ if (ret)
+ goto error;
+
+ return 0;
+
+error:
+ regmap_update_bits(info->regmap, SC2731_MODULE_EN1, SC2731_CHARGE_EN, 0);
+ return ret;
+}
+
+static void sc2731_charger_detect_status(struct sc2731_charger_info *info)
+{
+ unsigned int min, max;
+
+ /*
+ * If the USB charger status has been USB_CHARGER_PRESENT before
+ * registering the notifier, we should start to charge with getting
+ * the charge current.
+ */
+ if (info->usb_phy->chg_state != USB_CHARGER_PRESENT)
+ return;
+
+ usb_phy_get_charger_current(info->usb_phy, &min, &max);
+ info->limit = min;
+
+ schedule_work(&info->work);
+}
+
+static int sc2731_charger_probe(struct platform_device *pdev)
+{
+ struct device_node *np = pdev->dev.of_node;
+ struct sc2731_charger_info *info;
+ struct power_supply_config charger_cfg = { };
+ int ret;
+
+ info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL);
+ if (!info)
+ return -ENOMEM;
+
+ mutex_init(&info->lock);
+ info->dev = &pdev->dev;
+ INIT_WORK(&info->work, sc2731_charger_work);
+
+ info->regmap = dev_get_regmap(pdev->dev.parent, NULL);
+ if (!info->regmap) {
+ dev_err(&pdev->dev, "failed to get charger regmap\n");
+ return -ENODEV;
+ }
+
+ ret = of_property_read_u32(np, "reg", &info->base);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to get register address\n");
+ return -ENODEV;
+ }
+
+ charger_cfg.drv_data = info;
+ charger_cfg.of_node = np;
+ info->psy_usb = devm_power_supply_register(&pdev->dev,
+ &sc2731_charger_desc,
+ &charger_cfg);
+ if (IS_ERR(info->psy_usb)) {
+ dev_err(&pdev->dev, "failed to register power supply\n");
+ return PTR_ERR(info->psy_usb);
+ }
+
+ ret = sc2731_charger_hw_init(info);
+ if (ret)
+ return ret;
+
+ info->usb_phy = devm_usb_get_phy_by_phandle(&pdev->dev, "phys", 0);
+ if (IS_ERR(info->usb_phy)) {
+ dev_err(&pdev->dev, "failed to find USB phy\n");
+ return PTR_ERR(info->usb_phy);
+ }
+
+ info->usb_notify.notifier_call = sc2731_charger_usb_change;
+ ret = usb_register_notifier(info->usb_phy, &info->usb_notify);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to register notifier: %d\n", ret);
+ return ret;
+ }
+
+ sc2731_charger_detect_status(info);
+
+ return 0;
+}
+
+static int sc2731_charger_remove(struct platform_device *pdev)
+{
+ struct sc2731_charger_info *info = platform_get_drvdata(pdev);
+
+ usb_unregister_notifier(info->usb_phy, &info->usb_notify);
+
+ return 0;
+}
+
+static const struct of_device_id sc2731_charger_of_match[] = {
+ { .compatible = "sprd,sc2731-charger", },
+ { }
+};
+MODULE_DEVICE_TABLE(of, sc2731_charger_of_match);
+
+static struct platform_driver sc2731_charger_driver = {
+ .driver = {
+ .name = "sc2731-charger",
+ .of_match_table = sc2731_charger_of_match,
+ },
+ .probe = sc2731_charger_probe,
+ .remove = sc2731_charger_remove,
+};
+
+module_platform_driver(sc2731_charger_driver);
+
+MODULE_DESCRIPTION("Spreadtrum SC2731 Charger Driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/power/supply/sc27xx_fuel_gauge.c b/drivers/power/supply/sc27xx_fuel_gauge.c
new file mode 100644
index 000000000..3bf4b2639
--- /dev/null
+++ b/drivers/power/supply/sc27xx_fuel_gauge.c
@@ -0,0 +1,1352 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (C) 2018 Spreadtrum Communications Inc.
+
+#include <linux/gpio/consumer.h>
+#include <linux/iio/consumer.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/math64.h>
+#include <linux/module.h>
+#include <linux/nvmem-consumer.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/power_supply.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+
+/* PMIC global control registers definition */
+#define SC27XX_MODULE_EN0 0xc08
+#define SC27XX_CLK_EN0 0xc18
+#define SC27XX_FGU_EN BIT(7)
+#define SC27XX_FGU_RTC_EN BIT(6)
+
+/* FGU registers definition */
+#define SC27XX_FGU_START 0x0
+#define SC27XX_FGU_CONFIG 0x4
+#define SC27XX_FGU_ADC_CONFIG 0x8
+#define SC27XX_FGU_STATUS 0xc
+#define SC27XX_FGU_INT_EN 0x10
+#define SC27XX_FGU_INT_CLR 0x14
+#define SC27XX_FGU_INT_STS 0x1c
+#define SC27XX_FGU_VOLTAGE 0x20
+#define SC27XX_FGU_OCV 0x24
+#define SC27XX_FGU_POCV 0x28
+#define SC27XX_FGU_CURRENT 0x2c
+#define SC27XX_FGU_LOW_OVERLOAD 0x34
+#define SC27XX_FGU_CLBCNT_SETH 0x50
+#define SC27XX_FGU_CLBCNT_SETL 0x54
+#define SC27XX_FGU_CLBCNT_DELTH 0x58
+#define SC27XX_FGU_CLBCNT_DELTL 0x5c
+#define SC27XX_FGU_CLBCNT_VALH 0x68
+#define SC27XX_FGU_CLBCNT_VALL 0x6c
+#define SC27XX_FGU_CLBCNT_QMAXL 0x74
+#define SC27XX_FGU_USER_AREA_SET 0xa0
+#define SC27XX_FGU_USER_AREA_CLEAR 0xa4
+#define SC27XX_FGU_USER_AREA_STATUS 0xa8
+#define SC27XX_FGU_VOLTAGE_BUF 0xd0
+#define SC27XX_FGU_CURRENT_BUF 0xf0
+
+#define SC27XX_WRITE_SELCLB_EN BIT(0)
+#define SC27XX_FGU_CLBCNT_MASK GENMASK(15, 0)
+#define SC27XX_FGU_CLBCNT_SHIFT 16
+#define SC27XX_FGU_LOW_OVERLOAD_MASK GENMASK(12, 0)
+
+#define SC27XX_FGU_INT_MASK GENMASK(9, 0)
+#define SC27XX_FGU_LOW_OVERLOAD_INT BIT(0)
+#define SC27XX_FGU_CLBCNT_DELTA_INT BIT(2)
+
+#define SC27XX_FGU_MODE_AREA_MASK GENMASK(15, 12)
+#define SC27XX_FGU_CAP_AREA_MASK GENMASK(11, 0)
+#define SC27XX_FGU_MODE_AREA_SHIFT 12
+
+#define SC27XX_FGU_FIRST_POWERTON GENMASK(3, 0)
+#define SC27XX_FGU_DEFAULT_CAP GENMASK(11, 0)
+#define SC27XX_FGU_NORMAIL_POWERTON 0x5
+
+#define SC27XX_FGU_CUR_BASIC_ADC 8192
+#define SC27XX_FGU_SAMPLE_HZ 2
+/* micro Ohms */
+#define SC27XX_FGU_IDEAL_RESISTANCE 20000
+
+/*
+ * struct sc27xx_fgu_data: describe the FGU device
+ * @regmap: regmap for register access
+ * @dev: platform device
+ * @battery: battery power supply
+ * @base: the base offset for the controller
+ * @lock: protect the structure
+ * @gpiod: GPIO for battery detection
+ * @channel: IIO channel to get battery temperature
+ * @charge_chan: IIO channel to get charge voltage
+ * @internal_resist: the battery internal resistance in mOhm
+ * @total_cap: the total capacity of the battery in mAh
+ * @init_cap: the initial capacity of the battery in mAh
+ * @alarm_cap: the alarm capacity
+ * @init_clbcnt: the initial coulomb counter
+ * @max_volt: the maximum constant input voltage in millivolt
+ * @min_volt: the minimum drained battery voltage in microvolt
+ * @boot_volt: the voltage measured during boot in microvolt
+ * @table_len: the capacity table length
+ * @resist_table_len: the resistance table length
+ * @cur_1000ma_adc: ADC value corresponding to 1000 mA
+ * @vol_1000mv_adc: ADC value corresponding to 1000 mV
+ * @calib_resist: the real resistance of coulomb counter chip in uOhm
+ * @cap_table: capacity table with corresponding ocv
+ * @resist_table: resistance percent table with corresponding temperature
+ */
+struct sc27xx_fgu_data {
+ struct regmap *regmap;
+ struct device *dev;
+ struct power_supply *battery;
+ u32 base;
+ struct mutex lock;
+ struct gpio_desc *gpiod;
+ struct iio_channel *channel;
+ struct iio_channel *charge_chan;
+ bool bat_present;
+ int internal_resist;
+ int total_cap;
+ int init_cap;
+ int alarm_cap;
+ int init_clbcnt;
+ int max_volt;
+ int min_volt;
+ int boot_volt;
+ int table_len;
+ int resist_table_len;
+ int cur_1000ma_adc;
+ int vol_1000mv_adc;
+ int calib_resist;
+ struct power_supply_battery_ocv_table *cap_table;
+ struct power_supply_resistance_temp_table *resist_table;
+};
+
+static int sc27xx_fgu_cap_to_clbcnt(struct sc27xx_fgu_data *data, int capacity);
+static void sc27xx_fgu_capacity_calibration(struct sc27xx_fgu_data *data,
+ int cap, bool int_mode);
+static void sc27xx_fgu_adjust_cap(struct sc27xx_fgu_data *data, int cap);
+static int sc27xx_fgu_get_temp(struct sc27xx_fgu_data *data, int *temp);
+
+static const char * const sc27xx_charger_supply_name[] = {
+ "sc2731_charger",
+ "sc2720_charger",
+ "sc2721_charger",
+ "sc2723_charger",
+};
+
+static int sc27xx_fgu_adc_to_current(struct sc27xx_fgu_data *data, s64 adc)
+{
+ return DIV_S64_ROUND_CLOSEST(adc * 1000, data->cur_1000ma_adc);
+}
+
+static int sc27xx_fgu_adc_to_voltage(struct sc27xx_fgu_data *data, s64 adc)
+{
+ return DIV_S64_ROUND_CLOSEST(adc * 1000, data->vol_1000mv_adc);
+}
+
+static int sc27xx_fgu_voltage_to_adc(struct sc27xx_fgu_data *data, int vol)
+{
+ return DIV_ROUND_CLOSEST(vol * data->vol_1000mv_adc, 1000);
+}
+
+static bool sc27xx_fgu_is_first_poweron(struct sc27xx_fgu_data *data)
+{
+ int ret, status, cap, mode;
+
+ ret = regmap_read(data->regmap,
+ data->base + SC27XX_FGU_USER_AREA_STATUS, &status);
+ if (ret)
+ return false;
+
+ /*
+ * We use low 4 bits to save the last battery capacity and high 12 bits
+ * to save the system boot mode.
+ */
+ mode = (status & SC27XX_FGU_MODE_AREA_MASK) >> SC27XX_FGU_MODE_AREA_SHIFT;
+ cap = status & SC27XX_FGU_CAP_AREA_MASK;
+
+ /*
+ * When FGU has been powered down, the user area registers became
+ * default value (0xffff), which can be used to valid if the system is
+ * first power on or not.
+ */
+ if (mode == SC27XX_FGU_FIRST_POWERTON || cap == SC27XX_FGU_DEFAULT_CAP)
+ return true;
+
+ return false;
+}
+
+static int sc27xx_fgu_save_boot_mode(struct sc27xx_fgu_data *data,
+ int boot_mode)
+{
+ int ret;
+
+ ret = regmap_update_bits(data->regmap,
+ data->base + SC27XX_FGU_USER_AREA_CLEAR,
+ SC27XX_FGU_MODE_AREA_MASK,
+ SC27XX_FGU_MODE_AREA_MASK);
+ if (ret)
+ return ret;
+
+ /*
+ * Since the user area registers are put on power always-on region,
+ * then these registers changing time will be a little long. Thus
+ * here we should delay 200us to wait until values are updated
+ * successfully according to the datasheet.
+ */
+ udelay(200);
+
+ ret = regmap_update_bits(data->regmap,
+ data->base + SC27XX_FGU_USER_AREA_SET,
+ SC27XX_FGU_MODE_AREA_MASK,
+ boot_mode << SC27XX_FGU_MODE_AREA_SHIFT);
+ if (ret)
+ return ret;
+
+ /*
+ * Since the user area registers are put on power always-on region,
+ * then these registers changing time will be a little long. Thus
+ * here we should delay 200us to wait until values are updated
+ * successfully according to the datasheet.
+ */
+ udelay(200);
+
+ /*
+ * According to the datasheet, we should set the USER_AREA_CLEAR to 0 to
+ * make the user area data available, otherwise we can not save the user
+ * area data.
+ */
+ return regmap_update_bits(data->regmap,
+ data->base + SC27XX_FGU_USER_AREA_CLEAR,
+ SC27XX_FGU_MODE_AREA_MASK, 0);
+}
+
+static int sc27xx_fgu_save_last_cap(struct sc27xx_fgu_data *data, int cap)
+{
+ int ret;
+
+ ret = regmap_update_bits(data->regmap,
+ data->base + SC27XX_FGU_USER_AREA_CLEAR,
+ SC27XX_FGU_CAP_AREA_MASK,
+ SC27XX_FGU_CAP_AREA_MASK);
+ if (ret)
+ return ret;
+
+ /*
+ * Since the user area registers are put on power always-on region,
+ * then these registers changing time will be a little long. Thus
+ * here we should delay 200us to wait until values are updated
+ * successfully according to the datasheet.
+ */
+ udelay(200);
+
+ ret = regmap_update_bits(data->regmap,
+ data->base + SC27XX_FGU_USER_AREA_SET,
+ SC27XX_FGU_CAP_AREA_MASK, cap);
+ if (ret)
+ return ret;
+
+ /*
+ * Since the user area registers are put on power always-on region,
+ * then these registers changing time will be a little long. Thus
+ * here we should delay 200us to wait until values are updated
+ * successfully according to the datasheet.
+ */
+ udelay(200);
+
+ /*
+ * According to the datasheet, we should set the USER_AREA_CLEAR to 0 to
+ * make the user area data available, otherwise we can not save the user
+ * area data.
+ */
+ return regmap_update_bits(data->regmap,
+ data->base + SC27XX_FGU_USER_AREA_CLEAR,
+ SC27XX_FGU_CAP_AREA_MASK, 0);
+}
+
+static int sc27xx_fgu_read_last_cap(struct sc27xx_fgu_data *data, int *cap)
+{
+ int ret, value;
+
+ ret = regmap_read(data->regmap,
+ data->base + SC27XX_FGU_USER_AREA_STATUS, &value);
+ if (ret)
+ return ret;
+
+ *cap = value & SC27XX_FGU_CAP_AREA_MASK;
+ return 0;
+}
+
+/*
+ * When system boots on, we can not read battery capacity from coulomb
+ * registers, since now the coulomb registers are invalid. So we should
+ * calculate the battery open circuit voltage, and get current battery
+ * capacity according to the capacity table.
+ */
+static int sc27xx_fgu_get_boot_capacity(struct sc27xx_fgu_data *data, int *cap)
+{
+ int volt, cur, oci, ocv, ret;
+ bool is_first_poweron = sc27xx_fgu_is_first_poweron(data);
+
+ /*
+ * If system is not the first power on, we should use the last saved
+ * battery capacity as the initial battery capacity. Otherwise we should
+ * re-calculate the initial battery capacity.
+ */
+ if (!is_first_poweron) {
+ ret = sc27xx_fgu_read_last_cap(data, cap);
+ if (ret)
+ return ret;
+
+ return sc27xx_fgu_save_boot_mode(data, SC27XX_FGU_NORMAIL_POWERTON);
+ }
+
+ /*
+ * After system booting on, the SC27XX_FGU_CLBCNT_QMAXL register saved
+ * the first sampled open circuit current.
+ */
+ ret = regmap_read(data->regmap, data->base + SC27XX_FGU_CLBCNT_QMAXL,
+ &cur);
+ if (ret)
+ return ret;
+
+ cur <<= 1;
+ oci = sc27xx_fgu_adc_to_current(data, cur - SC27XX_FGU_CUR_BASIC_ADC);
+
+ /*
+ * Should get the OCV from SC27XX_FGU_POCV register at the system
+ * beginning. It is ADC values reading from registers which need to
+ * convert the corresponding voltage.
+ */
+ ret = regmap_read(data->regmap, data->base + SC27XX_FGU_POCV, &volt);
+ if (ret)
+ return ret;
+
+ volt = sc27xx_fgu_adc_to_voltage(data, volt);
+ ocv = volt * 1000 - oci * data->internal_resist;
+ data->boot_volt = ocv;
+
+ /*
+ * Parse the capacity table to look up the correct capacity percent
+ * according to current battery's corresponding OCV values.
+ */
+ *cap = power_supply_ocv2cap_simple(data->cap_table, data->table_len,
+ ocv);
+
+ ret = sc27xx_fgu_save_last_cap(data, *cap);
+ if (ret)
+ return ret;
+
+ return sc27xx_fgu_save_boot_mode(data, SC27XX_FGU_NORMAIL_POWERTON);
+}
+
+static int sc27xx_fgu_set_clbcnt(struct sc27xx_fgu_data *data, int clbcnt)
+{
+ int ret;
+
+ ret = regmap_update_bits(data->regmap,
+ data->base + SC27XX_FGU_CLBCNT_SETL,
+ SC27XX_FGU_CLBCNT_MASK, clbcnt);
+ if (ret)
+ return ret;
+
+ ret = regmap_update_bits(data->regmap,
+ data->base + SC27XX_FGU_CLBCNT_SETH,
+ SC27XX_FGU_CLBCNT_MASK,
+ clbcnt >> SC27XX_FGU_CLBCNT_SHIFT);
+ if (ret)
+ return ret;
+
+ return regmap_update_bits(data->regmap, data->base + SC27XX_FGU_START,
+ SC27XX_WRITE_SELCLB_EN,
+ SC27XX_WRITE_SELCLB_EN);
+}
+
+static int sc27xx_fgu_get_clbcnt(struct sc27xx_fgu_data *data, int *clb_cnt)
+{
+ int ccl, cch, ret;
+
+ ret = regmap_read(data->regmap, data->base + SC27XX_FGU_CLBCNT_VALL,
+ &ccl);
+ if (ret)
+ return ret;
+
+ ret = regmap_read(data->regmap, data->base + SC27XX_FGU_CLBCNT_VALH,
+ &cch);
+ if (ret)
+ return ret;
+
+ *clb_cnt = ccl & SC27XX_FGU_CLBCNT_MASK;
+ *clb_cnt |= (cch & SC27XX_FGU_CLBCNT_MASK) << SC27XX_FGU_CLBCNT_SHIFT;
+
+ return 0;
+}
+
+static int sc27xx_fgu_get_vol_now(struct sc27xx_fgu_data *data, int *val)
+{
+ int ret;
+ u32 vol;
+
+ ret = regmap_read(data->regmap, data->base + SC27XX_FGU_VOLTAGE_BUF,
+ &vol);
+ if (ret)
+ return ret;
+
+ /*
+ * It is ADC values reading from registers which need to convert to
+ * corresponding voltage values.
+ */
+ *val = sc27xx_fgu_adc_to_voltage(data, vol);
+
+ return 0;
+}
+
+static int sc27xx_fgu_get_cur_now(struct sc27xx_fgu_data *data, int *val)
+{
+ int ret;
+ u32 cur;
+
+ ret = regmap_read(data->regmap, data->base + SC27XX_FGU_CURRENT_BUF,
+ &cur);
+ if (ret)
+ return ret;
+
+ /*
+ * It is ADC values reading from registers which need to convert to
+ * corresponding current values.
+ */
+ *val = sc27xx_fgu_adc_to_current(data, cur - SC27XX_FGU_CUR_BASIC_ADC);
+
+ return 0;
+}
+
+static int sc27xx_fgu_get_capacity(struct sc27xx_fgu_data *data, int *cap)
+{
+ int ret, cur_clbcnt, delta_clbcnt, delta_cap, temp;
+
+ /* Get current coulomb counters firstly */
+ ret = sc27xx_fgu_get_clbcnt(data, &cur_clbcnt);
+ if (ret)
+ return ret;
+
+ delta_clbcnt = cur_clbcnt - data->init_clbcnt;
+
+ /*
+ * Convert coulomb counter to delta capacity (mAh), and set multiplier
+ * as 10 to improve the precision.
+ */
+ temp = DIV_ROUND_CLOSEST(delta_clbcnt * 10, 36 * SC27XX_FGU_SAMPLE_HZ);
+ temp = sc27xx_fgu_adc_to_current(data, temp / 1000);
+
+ /*
+ * Convert to capacity percent of the battery total capacity,
+ * and multiplier is 100 too.
+ */
+ delta_cap = DIV_ROUND_CLOSEST(temp * 100, data->total_cap);
+ *cap = delta_cap + data->init_cap;
+
+ /* Calibrate the battery capacity in a normal range. */
+ sc27xx_fgu_capacity_calibration(data, *cap, false);
+
+ return 0;
+}
+
+static int sc27xx_fgu_get_vbat_vol(struct sc27xx_fgu_data *data, int *val)
+{
+ int ret, vol;
+
+ ret = regmap_read(data->regmap, data->base + SC27XX_FGU_VOLTAGE, &vol);
+ if (ret)
+ return ret;
+
+ /*
+ * It is ADC values reading from registers which need to convert to
+ * corresponding voltage values.
+ */
+ *val = sc27xx_fgu_adc_to_voltage(data, vol);
+
+ return 0;
+}
+
+static int sc27xx_fgu_get_current(struct sc27xx_fgu_data *data, int *val)
+{
+ int ret, cur;
+
+ ret = regmap_read(data->regmap, data->base + SC27XX_FGU_CURRENT, &cur);
+ if (ret)
+ return ret;
+
+ /*
+ * It is ADC values reading from registers which need to convert to
+ * corresponding current values.
+ */
+ *val = sc27xx_fgu_adc_to_current(data, cur - SC27XX_FGU_CUR_BASIC_ADC);
+
+ return 0;
+}
+
+static int sc27xx_fgu_get_vbat_ocv(struct sc27xx_fgu_data *data, int *val)
+{
+ int vol, cur, ret, temp, resistance;
+
+ ret = sc27xx_fgu_get_vbat_vol(data, &vol);
+ if (ret)
+ return ret;
+
+ ret = sc27xx_fgu_get_current(data, &cur);
+ if (ret)
+ return ret;
+
+ resistance = data->internal_resist;
+ if (data->resist_table_len > 0) {
+ ret = sc27xx_fgu_get_temp(data, &temp);
+ if (ret)
+ return ret;
+
+ resistance = power_supply_temp2resist_simple(data->resist_table,
+ data->resist_table_len, temp);
+ resistance = data->internal_resist * resistance / 100;
+ }
+
+ /* Return the battery OCV in micro volts. */
+ *val = vol * 1000 - cur * resistance;
+
+ return 0;
+}
+
+static int sc27xx_fgu_get_charge_vol(struct sc27xx_fgu_data *data, int *val)
+{
+ int ret, vol;
+
+ ret = iio_read_channel_processed(data->charge_chan, &vol);
+ if (ret < 0)
+ return ret;
+
+ *val = vol * 1000;
+ return 0;
+}
+
+static int sc27xx_fgu_get_temp(struct sc27xx_fgu_data *data, int *temp)
+{
+ return iio_read_channel_processed(data->channel, temp);
+}
+
+static int sc27xx_fgu_get_health(struct sc27xx_fgu_data *data, int *health)
+{
+ int ret, vol;
+
+ ret = sc27xx_fgu_get_vbat_vol(data, &vol);
+ if (ret)
+ return ret;
+
+ if (vol > data->max_volt)
+ *health = POWER_SUPPLY_HEALTH_OVERVOLTAGE;
+ else
+ *health = POWER_SUPPLY_HEALTH_GOOD;
+
+ return 0;
+}
+
+static int sc27xx_fgu_get_status(struct sc27xx_fgu_data *data, int *status)
+{
+ union power_supply_propval val;
+ struct power_supply *psy;
+ int i, ret = -EINVAL;
+
+ for (i = 0; i < ARRAY_SIZE(sc27xx_charger_supply_name); i++) {
+ psy = power_supply_get_by_name(sc27xx_charger_supply_name[i]);
+ if (!psy)
+ continue;
+
+ ret = power_supply_get_property(psy, POWER_SUPPLY_PROP_STATUS,
+ &val);
+ power_supply_put(psy);
+ if (ret)
+ return ret;
+
+ *status = val.intval;
+ }
+
+ return ret;
+}
+
+static int sc27xx_fgu_get_property(struct power_supply *psy,
+ enum power_supply_property psp,
+ union power_supply_propval *val)
+{
+ struct sc27xx_fgu_data *data = power_supply_get_drvdata(psy);
+ int ret = 0;
+ int value;
+
+ mutex_lock(&data->lock);
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_STATUS:
+ ret = sc27xx_fgu_get_status(data, &value);
+ if (ret)
+ goto error;
+
+ val->intval = value;
+ break;
+
+ case POWER_SUPPLY_PROP_HEALTH:
+ ret = sc27xx_fgu_get_health(data, &value);
+ if (ret)
+ goto error;
+
+ val->intval = value;
+ break;
+
+ case POWER_SUPPLY_PROP_PRESENT:
+ val->intval = data->bat_present;
+ break;
+
+ case POWER_SUPPLY_PROP_TEMP:
+ ret = sc27xx_fgu_get_temp(data, &value);
+ if (ret)
+ goto error;
+
+ val->intval = value;
+ break;
+
+ case POWER_SUPPLY_PROP_TECHNOLOGY:
+ val->intval = POWER_SUPPLY_TECHNOLOGY_LION;
+ break;
+
+ case POWER_SUPPLY_PROP_CAPACITY:
+ ret = sc27xx_fgu_get_capacity(data, &value);
+ if (ret)
+ goto error;
+
+ val->intval = value;
+ break;
+
+ case POWER_SUPPLY_PROP_VOLTAGE_AVG:
+ ret = sc27xx_fgu_get_vbat_vol(data, &value);
+ if (ret)
+ goto error;
+
+ val->intval = value * 1000;
+ break;
+
+ case POWER_SUPPLY_PROP_VOLTAGE_OCV:
+ ret = sc27xx_fgu_get_vbat_ocv(data, &value);
+ if (ret)
+ goto error;
+
+ val->intval = value;
+ break;
+
+ case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE:
+ ret = sc27xx_fgu_get_charge_vol(data, &value);
+ if (ret)
+ goto error;
+
+ val->intval = value;
+ break;
+
+ case POWER_SUPPLY_PROP_CURRENT_AVG:
+ ret = sc27xx_fgu_get_current(data, &value);
+ if (ret)
+ goto error;
+
+ val->intval = value * 1000;
+ break;
+
+ case POWER_SUPPLY_PROP_ENERGY_FULL_DESIGN:
+ val->intval = data->total_cap * 1000;
+ break;
+
+ case POWER_SUPPLY_PROP_CHARGE_NOW:
+ ret = sc27xx_fgu_get_clbcnt(data, &value);
+ if (ret)
+ goto error;
+
+ value = DIV_ROUND_CLOSEST(value * 10,
+ 36 * SC27XX_FGU_SAMPLE_HZ);
+ val->intval = sc27xx_fgu_adc_to_current(data, value);
+
+ break;
+
+ case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+ ret = sc27xx_fgu_get_vol_now(data, &value);
+ if (ret)
+ goto error;
+
+ val->intval = value * 1000;
+ break;
+
+ case POWER_SUPPLY_PROP_CURRENT_NOW:
+ ret = sc27xx_fgu_get_cur_now(data, &value);
+ if (ret)
+ goto error;
+
+ val->intval = value * 1000;
+ break;
+
+ case POWER_SUPPLY_PROP_VOLTAGE_BOOT:
+ val->intval = data->boot_volt;
+ break;
+
+ default:
+ ret = -EINVAL;
+ break;
+ }
+
+error:
+ mutex_unlock(&data->lock);
+ return ret;
+}
+
+static int sc27xx_fgu_set_property(struct power_supply *psy,
+ enum power_supply_property psp,
+ const union power_supply_propval *val)
+{
+ struct sc27xx_fgu_data *data = power_supply_get_drvdata(psy);
+ int ret;
+
+ mutex_lock(&data->lock);
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_CAPACITY:
+ ret = sc27xx_fgu_save_last_cap(data, val->intval);
+ if (ret < 0)
+ dev_err(data->dev, "failed to save battery capacity\n");
+ break;
+
+ case POWER_SUPPLY_PROP_CALIBRATE:
+ sc27xx_fgu_adjust_cap(data, val->intval);
+ ret = 0;
+ break;
+
+ case POWER_SUPPLY_PROP_ENERGY_FULL_DESIGN:
+ data->total_cap = val->intval / 1000;
+ ret = 0;
+ break;
+
+ default:
+ ret = -EINVAL;
+ }
+
+ mutex_unlock(&data->lock);
+
+ return ret;
+}
+
+static int sc27xx_fgu_property_is_writeable(struct power_supply *psy,
+ enum power_supply_property psp)
+{
+ return psp == POWER_SUPPLY_PROP_CAPACITY ||
+ psp == POWER_SUPPLY_PROP_CALIBRATE ||
+ psp == POWER_SUPPLY_PROP_ENERGY_FULL_DESIGN;
+}
+
+static enum power_supply_property sc27xx_fgu_props[] = {
+ POWER_SUPPLY_PROP_STATUS,
+ POWER_SUPPLY_PROP_HEALTH,
+ POWER_SUPPLY_PROP_PRESENT,
+ POWER_SUPPLY_PROP_TEMP,
+ POWER_SUPPLY_PROP_TECHNOLOGY,
+ POWER_SUPPLY_PROP_CAPACITY,
+ POWER_SUPPLY_PROP_VOLTAGE_NOW,
+ POWER_SUPPLY_PROP_VOLTAGE_OCV,
+ POWER_SUPPLY_PROP_VOLTAGE_AVG,
+ POWER_SUPPLY_PROP_VOLTAGE_BOOT,
+ POWER_SUPPLY_PROP_CURRENT_NOW,
+ POWER_SUPPLY_PROP_CURRENT_AVG,
+ POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE,
+ POWER_SUPPLY_PROP_ENERGY_FULL_DESIGN,
+ POWER_SUPPLY_PROP_CALIBRATE,
+ POWER_SUPPLY_PROP_CHARGE_NOW
+};
+
+static const struct power_supply_desc sc27xx_fgu_desc = {
+ .name = "sc27xx-fgu",
+ .type = POWER_SUPPLY_TYPE_BATTERY,
+ .properties = sc27xx_fgu_props,
+ .num_properties = ARRAY_SIZE(sc27xx_fgu_props),
+ .get_property = sc27xx_fgu_get_property,
+ .set_property = sc27xx_fgu_set_property,
+ .external_power_changed = power_supply_changed,
+ .property_is_writeable = sc27xx_fgu_property_is_writeable,
+ .no_thermal = true,
+};
+
+static void sc27xx_fgu_adjust_cap(struct sc27xx_fgu_data *data, int cap)
+{
+ int ret;
+
+ data->init_cap = cap;
+ ret = sc27xx_fgu_get_clbcnt(data, &data->init_clbcnt);
+ if (ret)
+ dev_err(data->dev, "failed to get init coulomb counter\n");
+}
+
+static void sc27xx_fgu_capacity_calibration(struct sc27xx_fgu_data *data,
+ int cap, bool int_mode)
+{
+ int ret, ocv, chg_sts, adc;
+
+ ret = sc27xx_fgu_get_vbat_ocv(data, &ocv);
+ if (ret) {
+ dev_err(data->dev, "get battery ocv error.\n");
+ return;
+ }
+
+ ret = sc27xx_fgu_get_status(data, &chg_sts);
+ if (ret) {
+ dev_err(data->dev, "get charger status error.\n");
+ return;
+ }
+
+ /*
+ * If we are in charging mode, then we do not need to calibrate the
+ * lower capacity.
+ */
+ if (chg_sts == POWER_SUPPLY_STATUS_CHARGING)
+ return;
+
+ if ((ocv > data->cap_table[0].ocv && cap < 100) || cap > 100) {
+ /*
+ * If current OCV value is larger than the max OCV value in
+ * OCV table, or the current capacity is larger than 100,
+ * we should force the inititial capacity to 100.
+ */
+ sc27xx_fgu_adjust_cap(data, 100);
+ } else if (ocv <= data->cap_table[data->table_len - 1].ocv) {
+ /*
+ * If current OCV value is leass than the minimum OCV value in
+ * OCV table, we should force the inititial capacity to 0.
+ */
+ sc27xx_fgu_adjust_cap(data, 0);
+ } else if ((ocv > data->cap_table[data->table_len - 1].ocv && cap <= 0) ||
+ (ocv > data->min_volt && cap <= data->alarm_cap)) {
+ /*
+ * If current OCV value is not matchable with current capacity,
+ * we should re-calculate current capacity by looking up the
+ * OCV table.
+ */
+ int cur_cap = power_supply_ocv2cap_simple(data->cap_table,
+ data->table_len, ocv);
+
+ sc27xx_fgu_adjust_cap(data, cur_cap);
+ } else if (ocv <= data->min_volt) {
+ /*
+ * If current OCV value is less than the low alarm voltage, but
+ * current capacity is larger than the alarm capacity, we should
+ * adjust the inititial capacity to alarm capacity.
+ */
+ if (cap > data->alarm_cap) {
+ sc27xx_fgu_adjust_cap(data, data->alarm_cap);
+ } else {
+ int cur_cap;
+
+ /*
+ * If current capacity is equal with 0 or less than 0
+ * (some error occurs), we should adjust inititial
+ * capacity to the capacity corresponding to current OCV
+ * value.
+ */
+ cur_cap = power_supply_ocv2cap_simple(data->cap_table,
+ data->table_len,
+ ocv);
+ sc27xx_fgu_adjust_cap(data, cur_cap);
+ }
+
+ if (!int_mode)
+ return;
+
+ /*
+ * After adjusting the battery capacity, we should set the
+ * lowest alarm voltage instead.
+ */
+ data->min_volt = data->cap_table[data->table_len - 1].ocv;
+ data->alarm_cap = power_supply_ocv2cap_simple(data->cap_table,
+ data->table_len,
+ data->min_volt);
+
+ adc = sc27xx_fgu_voltage_to_adc(data, data->min_volt / 1000);
+ regmap_update_bits(data->regmap,
+ data->base + SC27XX_FGU_LOW_OVERLOAD,
+ SC27XX_FGU_LOW_OVERLOAD_MASK, adc);
+ }
+}
+
+static irqreturn_t sc27xx_fgu_interrupt(int irq, void *dev_id)
+{
+ struct sc27xx_fgu_data *data = dev_id;
+ int ret, cap;
+ u32 status;
+
+ mutex_lock(&data->lock);
+
+ ret = regmap_read(data->regmap, data->base + SC27XX_FGU_INT_STS,
+ &status);
+ if (ret)
+ goto out;
+
+ ret = regmap_update_bits(data->regmap, data->base + SC27XX_FGU_INT_CLR,
+ status, status);
+ if (ret)
+ goto out;
+
+ /*
+ * When low overload voltage interrupt happens, we should calibrate the
+ * battery capacity in lower voltage stage.
+ */
+ if (!(status & SC27XX_FGU_LOW_OVERLOAD_INT))
+ goto out;
+
+ ret = sc27xx_fgu_get_capacity(data, &cap);
+ if (ret)
+ goto out;
+
+ sc27xx_fgu_capacity_calibration(data, cap, true);
+
+out:
+ mutex_unlock(&data->lock);
+
+ power_supply_changed(data->battery);
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t sc27xx_fgu_bat_detection(int irq, void *dev_id)
+{
+ struct sc27xx_fgu_data *data = dev_id;
+ int state;
+
+ mutex_lock(&data->lock);
+
+ state = gpiod_get_value_cansleep(data->gpiod);
+ if (state < 0) {
+ dev_err(data->dev, "failed to get gpio state\n");
+ mutex_unlock(&data->lock);
+ return IRQ_RETVAL(state);
+ }
+
+ data->bat_present = !!state;
+
+ mutex_unlock(&data->lock);
+
+ power_supply_changed(data->battery);
+ return IRQ_HANDLED;
+}
+
+static void sc27xx_fgu_disable(void *_data)
+{
+ struct sc27xx_fgu_data *data = _data;
+
+ regmap_update_bits(data->regmap, SC27XX_CLK_EN0, SC27XX_FGU_RTC_EN, 0);
+ regmap_update_bits(data->regmap, SC27XX_MODULE_EN0, SC27XX_FGU_EN, 0);
+}
+
+static int sc27xx_fgu_cap_to_clbcnt(struct sc27xx_fgu_data *data, int capacity)
+{
+ /*
+ * Get current capacity (mAh) = battery total capacity (mAh) *
+ * current capacity percent (capacity / 100).
+ */
+ int cur_cap = DIV_ROUND_CLOSEST(data->total_cap * capacity, 100);
+
+ /*
+ * Convert current capacity (mAh) to coulomb counter according to the
+ * formula: 1 mAh =3.6 coulomb.
+ */
+ return DIV_ROUND_CLOSEST(cur_cap * 36 * data->cur_1000ma_adc * SC27XX_FGU_SAMPLE_HZ, 10);
+}
+
+static int sc27xx_fgu_calibration(struct sc27xx_fgu_data *data)
+{
+ struct nvmem_cell *cell;
+ int calib_data, cal_4200mv;
+ void *buf;
+ size_t len;
+
+ cell = nvmem_cell_get(data->dev, "fgu_calib");
+ if (IS_ERR(cell))
+ return PTR_ERR(cell);
+
+ buf = nvmem_cell_read(cell, &len);
+ nvmem_cell_put(cell);
+
+ if (IS_ERR(buf))
+ return PTR_ERR(buf);
+
+ memcpy(&calib_data, buf, min(len, sizeof(u32)));
+
+ /*
+ * Get the ADC value corresponding to 4200 mV from eFuse controller
+ * according to below formula. Then convert to ADC values corresponding
+ * to 1000 mV and 1000 mA.
+ */
+ cal_4200mv = (calib_data & 0x1ff) + 6963 - 4096 - 256;
+ data->vol_1000mv_adc = DIV_ROUND_CLOSEST(cal_4200mv * 10, 42);
+ data->cur_1000ma_adc =
+ DIV_ROUND_CLOSEST(data->vol_1000mv_adc * 4 * data->calib_resist,
+ SC27XX_FGU_IDEAL_RESISTANCE);
+
+ kfree(buf);
+ return 0;
+}
+
+static int sc27xx_fgu_hw_init(struct sc27xx_fgu_data *data)
+{
+ struct power_supply_battery_info info = { };
+ struct power_supply_battery_ocv_table *table;
+ int ret, delta_clbcnt, alarm_adc;
+
+ ret = power_supply_get_battery_info(data->battery, &info);
+ if (ret) {
+ dev_err(data->dev, "failed to get battery information\n");
+ return ret;
+ }
+
+ data->total_cap = info.charge_full_design_uah / 1000;
+ data->max_volt = info.constant_charge_voltage_max_uv / 1000;
+ data->internal_resist = info.factory_internal_resistance_uohm / 1000;
+ data->min_volt = info.voltage_min_design_uv;
+
+ /*
+ * For SC27XX fuel gauge device, we only use one ocv-capacity
+ * table in normal temperature 20 Celsius.
+ */
+ table = power_supply_find_ocv2cap_table(&info, 20, &data->table_len);
+ if (!table)
+ return -EINVAL;
+
+ data->cap_table = devm_kmemdup(data->dev, table,
+ data->table_len * sizeof(*table),
+ GFP_KERNEL);
+ if (!data->cap_table) {
+ power_supply_put_battery_info(data->battery, &info);
+ return -ENOMEM;
+ }
+
+ data->alarm_cap = power_supply_ocv2cap_simple(data->cap_table,
+ data->table_len,
+ data->min_volt);
+ if (!data->alarm_cap)
+ data->alarm_cap += 1;
+
+ data->resist_table_len = info.resist_table_size;
+ if (data->resist_table_len > 0) {
+ data->resist_table = devm_kmemdup(data->dev, info.resist_table,
+ data->resist_table_len *
+ sizeof(struct power_supply_resistance_temp_table),
+ GFP_KERNEL);
+ if (!data->resist_table) {
+ power_supply_put_battery_info(data->battery, &info);
+ return -ENOMEM;
+ }
+ }
+
+ power_supply_put_battery_info(data->battery, &info);
+
+ ret = sc27xx_fgu_calibration(data);
+ if (ret)
+ return ret;
+
+ /* Enable the FGU module */
+ ret = regmap_update_bits(data->regmap, SC27XX_MODULE_EN0,
+ SC27XX_FGU_EN, SC27XX_FGU_EN);
+ if (ret) {
+ dev_err(data->dev, "failed to enable fgu\n");
+ return ret;
+ }
+
+ /* Enable the FGU RTC clock to make it work */
+ ret = regmap_update_bits(data->regmap, SC27XX_CLK_EN0,
+ SC27XX_FGU_RTC_EN, SC27XX_FGU_RTC_EN);
+ if (ret) {
+ dev_err(data->dev, "failed to enable fgu RTC clock\n");
+ goto disable_fgu;
+ }
+
+ ret = regmap_update_bits(data->regmap, data->base + SC27XX_FGU_INT_CLR,
+ SC27XX_FGU_INT_MASK, SC27XX_FGU_INT_MASK);
+ if (ret) {
+ dev_err(data->dev, "failed to clear interrupt status\n");
+ goto disable_clk;
+ }
+
+ /*
+ * Set the voltage low overload threshold, which means when the battery
+ * voltage is lower than this threshold, the controller will generate
+ * one interrupt to notify.
+ */
+ alarm_adc = sc27xx_fgu_voltage_to_adc(data, data->min_volt / 1000);
+ ret = regmap_update_bits(data->regmap, data->base + SC27XX_FGU_LOW_OVERLOAD,
+ SC27XX_FGU_LOW_OVERLOAD_MASK, alarm_adc);
+ if (ret) {
+ dev_err(data->dev, "failed to set fgu low overload\n");
+ goto disable_clk;
+ }
+
+ /*
+ * Set the coulomb counter delta threshold, that means when the coulomb
+ * counter change is multiples of the delta threshold, the controller
+ * will generate one interrupt to notify the users to update the battery
+ * capacity. Now we set the delta threshold as a counter value of 1%
+ * capacity.
+ */
+ delta_clbcnt = sc27xx_fgu_cap_to_clbcnt(data, 1);
+
+ ret = regmap_update_bits(data->regmap, data->base + SC27XX_FGU_CLBCNT_DELTL,
+ SC27XX_FGU_CLBCNT_MASK, delta_clbcnt);
+ if (ret) {
+ dev_err(data->dev, "failed to set low delta coulomb counter\n");
+ goto disable_clk;
+ }
+
+ ret = regmap_update_bits(data->regmap, data->base + SC27XX_FGU_CLBCNT_DELTH,
+ SC27XX_FGU_CLBCNT_MASK,
+ delta_clbcnt >> SC27XX_FGU_CLBCNT_SHIFT);
+ if (ret) {
+ dev_err(data->dev, "failed to set high delta coulomb counter\n");
+ goto disable_clk;
+ }
+
+ /*
+ * Get the boot battery capacity when system powers on, which is used to
+ * initialize the coulomb counter. After that, we can read the coulomb
+ * counter to measure the battery capacity.
+ */
+ ret = sc27xx_fgu_get_boot_capacity(data, &data->init_cap);
+ if (ret) {
+ dev_err(data->dev, "failed to get boot capacity\n");
+ goto disable_clk;
+ }
+
+ /*
+ * Convert battery capacity to the corresponding initial coulomb counter
+ * and set into coulomb counter registers.
+ */
+ data->init_clbcnt = sc27xx_fgu_cap_to_clbcnt(data, data->init_cap);
+ ret = sc27xx_fgu_set_clbcnt(data, data->init_clbcnt);
+ if (ret) {
+ dev_err(data->dev, "failed to initialize coulomb counter\n");
+ goto disable_clk;
+ }
+
+ return 0;
+
+disable_clk:
+ regmap_update_bits(data->regmap, SC27XX_CLK_EN0, SC27XX_FGU_RTC_EN, 0);
+disable_fgu:
+ regmap_update_bits(data->regmap, SC27XX_MODULE_EN0, SC27XX_FGU_EN, 0);
+
+ return ret;
+}
+
+static int sc27xx_fgu_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct device_node *np = dev->of_node;
+ struct power_supply_config fgu_cfg = { };
+ struct sc27xx_fgu_data *data;
+ int ret, irq;
+
+ data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
+
+ data->regmap = dev_get_regmap(dev->parent, NULL);
+ if (!data->regmap) {
+ dev_err(dev, "failed to get regmap\n");
+ return -ENODEV;
+ }
+
+ ret = device_property_read_u32(dev, "reg", &data->base);
+ if (ret) {
+ dev_err(dev, "failed to get fgu address\n");
+ return ret;
+ }
+
+ ret = device_property_read_u32(&pdev->dev,
+ "sprd,calib-resistance-micro-ohms",
+ &data->calib_resist);
+ if (ret) {
+ dev_err(&pdev->dev,
+ "failed to get fgu calibration resistance\n");
+ return ret;
+ }
+
+ data->channel = devm_iio_channel_get(dev, "bat-temp");
+ if (IS_ERR(data->channel)) {
+ dev_err(dev, "failed to get IIO channel\n");
+ return PTR_ERR(data->channel);
+ }
+
+ data->charge_chan = devm_iio_channel_get(dev, "charge-vol");
+ if (IS_ERR(data->charge_chan)) {
+ dev_err(dev, "failed to get charge IIO channel\n");
+ return PTR_ERR(data->charge_chan);
+ }
+
+ data->gpiod = devm_gpiod_get(dev, "bat-detect", GPIOD_IN);
+ if (IS_ERR(data->gpiod)) {
+ dev_err(dev, "failed to get battery detection GPIO\n");
+ return PTR_ERR(data->gpiod);
+ }
+
+ ret = gpiod_get_value_cansleep(data->gpiod);
+ if (ret < 0) {
+ dev_err(dev, "failed to get gpio state\n");
+ return ret;
+ }
+
+ data->bat_present = !!ret;
+ mutex_init(&data->lock);
+ data->dev = dev;
+ platform_set_drvdata(pdev, data);
+
+ fgu_cfg.drv_data = data;
+ fgu_cfg.of_node = np;
+ data->battery = devm_power_supply_register(dev, &sc27xx_fgu_desc,
+ &fgu_cfg);
+ if (IS_ERR(data->battery)) {
+ dev_err(dev, "failed to register power supply\n");
+ return PTR_ERR(data->battery);
+ }
+
+ ret = sc27xx_fgu_hw_init(data);
+ if (ret) {
+ dev_err(dev, "failed to initialize fgu hardware\n");
+ return ret;
+ }
+
+ ret = devm_add_action_or_reset(dev, sc27xx_fgu_disable, data);
+ if (ret) {
+ dev_err(dev, "failed to add fgu disable action\n");
+ return ret;
+ }
+
+ irq = platform_get_irq(pdev, 0);
+ if (irq < 0) {
+ dev_err(dev, "no irq resource specified\n");
+ return irq;
+ }
+
+ ret = devm_request_threaded_irq(data->dev, irq, NULL,
+ sc27xx_fgu_interrupt,
+ IRQF_NO_SUSPEND | IRQF_ONESHOT,
+ pdev->name, data);
+ if (ret) {
+ dev_err(data->dev, "failed to request fgu IRQ\n");
+ return ret;
+ }
+
+ irq = gpiod_to_irq(data->gpiod);
+ if (irq < 0) {
+ dev_err(dev, "failed to translate GPIO to IRQ\n");
+ return irq;
+ }
+
+ ret = devm_request_threaded_irq(dev, irq, NULL,
+ sc27xx_fgu_bat_detection,
+ IRQF_ONESHOT | IRQF_TRIGGER_RISING |
+ IRQF_TRIGGER_FALLING,
+ pdev->name, data);
+ if (ret) {
+ dev_err(dev, "failed to request IRQ\n");
+ return ret;
+ }
+
+ return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int sc27xx_fgu_resume(struct device *dev)
+{
+ struct sc27xx_fgu_data *data = dev_get_drvdata(dev);
+ int ret;
+
+ ret = regmap_update_bits(data->regmap, data->base + SC27XX_FGU_INT_EN,
+ SC27XX_FGU_LOW_OVERLOAD_INT |
+ SC27XX_FGU_CLBCNT_DELTA_INT, 0);
+ if (ret) {
+ dev_err(data->dev, "failed to disable fgu interrupts\n");
+ return ret;
+ }
+
+ return 0;
+}
+
+static int sc27xx_fgu_suspend(struct device *dev)
+{
+ struct sc27xx_fgu_data *data = dev_get_drvdata(dev);
+ int ret, status, ocv;
+
+ ret = sc27xx_fgu_get_status(data, &status);
+ if (ret)
+ return ret;
+
+ /*
+ * If we are charging, then no need to enable the FGU interrupts to
+ * adjust the battery capacity.
+ */
+ if (status != POWER_SUPPLY_STATUS_NOT_CHARGING &&
+ status != POWER_SUPPLY_STATUS_DISCHARGING)
+ return 0;
+
+ ret = regmap_update_bits(data->regmap, data->base + SC27XX_FGU_INT_EN,
+ SC27XX_FGU_LOW_OVERLOAD_INT,
+ SC27XX_FGU_LOW_OVERLOAD_INT);
+ if (ret) {
+ dev_err(data->dev, "failed to enable low voltage interrupt\n");
+ return ret;
+ }
+
+ ret = sc27xx_fgu_get_vbat_ocv(data, &ocv);
+ if (ret)
+ goto disable_int;
+
+ /*
+ * If current OCV is less than the minimum voltage, we should enable the
+ * coulomb counter threshold interrupt to notify events to adjust the
+ * battery capacity.
+ */
+ if (ocv < data->min_volt) {
+ ret = regmap_update_bits(data->regmap,
+ data->base + SC27XX_FGU_INT_EN,
+ SC27XX_FGU_CLBCNT_DELTA_INT,
+ SC27XX_FGU_CLBCNT_DELTA_INT);
+ if (ret) {
+ dev_err(data->dev,
+ "failed to enable coulomb threshold int\n");
+ goto disable_int;
+ }
+ }
+
+ return 0;
+
+disable_int:
+ regmap_update_bits(data->regmap, data->base + SC27XX_FGU_INT_EN,
+ SC27XX_FGU_LOW_OVERLOAD_INT, 0);
+ return ret;
+}
+#endif
+
+static const struct dev_pm_ops sc27xx_fgu_pm_ops = {
+ SET_SYSTEM_SLEEP_PM_OPS(sc27xx_fgu_suspend, sc27xx_fgu_resume)
+};
+
+static const struct of_device_id sc27xx_fgu_of_match[] = {
+ { .compatible = "sprd,sc2731-fgu", },
+ { }
+};
+MODULE_DEVICE_TABLE(of, sc27xx_fgu_of_match);
+
+static struct platform_driver sc27xx_fgu_driver = {
+ .probe = sc27xx_fgu_probe,
+ .driver = {
+ .name = "sc27xx-fgu",
+ .of_match_table = sc27xx_fgu_of_match,
+ .pm = &sc27xx_fgu_pm_ops,
+ }
+};
+
+module_platform_driver(sc27xx_fgu_driver);
+
+MODULE_DESCRIPTION("Spreadtrum SC27XX PMICs Fual Gauge Unit Driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/power/supply/smb347-charger.c b/drivers/power/supply/smb347-charger.c
new file mode 100644
index 000000000..912e2184f
--- /dev/null
+++ b/drivers/power/supply/smb347-charger.c
@@ -0,0 +1,1410 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Summit Microelectronics SMB347 Battery Charger Driver
+ *
+ * Copyright (C) 2011, Intel Corporation
+ *
+ * Authors: Bruce E. Robertson <bruce.e.robertson@intel.com>
+ * Mika Westerberg <mika.westerberg@linux.intel.com>
+ */
+
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/gpio.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/i2c.h>
+#include <linux/power_supply.h>
+#include <linux/property.h>
+#include <linux/regmap.h>
+
+#include <dt-bindings/power/summit,smb347-charger.h>
+
+/* Use the default compensation method */
+#define SMB3XX_SOFT_TEMP_COMPENSATE_DEFAULT -1
+
+/* Use default factory programmed value for hard/soft temperature limit */
+#define SMB3XX_TEMP_USE_DEFAULT -273
+
+/*
+ * Configuration registers. These are mirrored to volatile RAM and can be
+ * written once %CMD_A_ALLOW_WRITE is set in %CMD_A register. They will be
+ * reloaded from non-volatile registers after POR.
+ */
+#define CFG_CHARGE_CURRENT 0x00
+#define CFG_CHARGE_CURRENT_FCC_MASK 0xe0
+#define CFG_CHARGE_CURRENT_FCC_SHIFT 5
+#define CFG_CHARGE_CURRENT_PCC_MASK 0x18
+#define CFG_CHARGE_CURRENT_PCC_SHIFT 3
+#define CFG_CHARGE_CURRENT_TC_MASK 0x07
+#define CFG_CURRENT_LIMIT 0x01
+#define CFG_CURRENT_LIMIT_DC_MASK 0xf0
+#define CFG_CURRENT_LIMIT_DC_SHIFT 4
+#define CFG_CURRENT_LIMIT_USB_MASK 0x0f
+#define CFG_FLOAT_VOLTAGE 0x03
+#define CFG_FLOAT_VOLTAGE_FLOAT_MASK 0x3f
+#define CFG_FLOAT_VOLTAGE_THRESHOLD_MASK 0xc0
+#define CFG_FLOAT_VOLTAGE_THRESHOLD_SHIFT 6
+#define CFG_STAT 0x05
+#define CFG_STAT_DISABLED BIT(5)
+#define CFG_STAT_ACTIVE_HIGH BIT(7)
+#define CFG_PIN 0x06
+#define CFG_PIN_EN_CTRL_MASK 0x60
+#define CFG_PIN_EN_CTRL_ACTIVE_HIGH 0x40
+#define CFG_PIN_EN_CTRL_ACTIVE_LOW 0x60
+#define CFG_PIN_EN_APSD_IRQ BIT(1)
+#define CFG_PIN_EN_CHARGER_ERROR BIT(2)
+#define CFG_PIN_EN_CTRL BIT(4)
+#define CFG_THERM 0x07
+#define CFG_THERM_SOFT_HOT_COMPENSATION_MASK 0x03
+#define CFG_THERM_SOFT_HOT_COMPENSATION_SHIFT 0
+#define CFG_THERM_SOFT_COLD_COMPENSATION_MASK 0x0c
+#define CFG_THERM_SOFT_COLD_COMPENSATION_SHIFT 2
+#define CFG_THERM_MONITOR_DISABLED BIT(4)
+#define CFG_SYSOK 0x08
+#define CFG_SYSOK_SUSPEND_HARD_LIMIT_DISABLED BIT(2)
+#define CFG_OTHER 0x09
+#define CFG_OTHER_RID_MASK 0xc0
+#define CFG_OTHER_RID_ENABLED_AUTO_OTG 0xc0
+#define CFG_OTG 0x0a
+#define CFG_OTG_TEMP_THRESHOLD_MASK 0x30
+#define CFG_OTG_TEMP_THRESHOLD_SHIFT 4
+#define CFG_OTG_CC_COMPENSATION_MASK 0xc0
+#define CFG_OTG_CC_COMPENSATION_SHIFT 6
+#define CFG_TEMP_LIMIT 0x0b
+#define CFG_TEMP_LIMIT_SOFT_HOT_MASK 0x03
+#define CFG_TEMP_LIMIT_SOFT_HOT_SHIFT 0
+#define CFG_TEMP_LIMIT_SOFT_COLD_MASK 0x0c
+#define CFG_TEMP_LIMIT_SOFT_COLD_SHIFT 2
+#define CFG_TEMP_LIMIT_HARD_HOT_MASK 0x30
+#define CFG_TEMP_LIMIT_HARD_HOT_SHIFT 4
+#define CFG_TEMP_LIMIT_HARD_COLD_MASK 0xc0
+#define CFG_TEMP_LIMIT_HARD_COLD_SHIFT 6
+#define CFG_FAULT_IRQ 0x0c
+#define CFG_FAULT_IRQ_DCIN_UV BIT(2)
+#define CFG_STATUS_IRQ 0x0d
+#define CFG_STATUS_IRQ_TERMINATION_OR_TAPER BIT(4)
+#define CFG_STATUS_IRQ_CHARGE_TIMEOUT BIT(7)
+#define CFG_ADDRESS 0x0e
+
+/* Command registers */
+#define CMD_A 0x30
+#define CMD_A_CHG_ENABLED BIT(1)
+#define CMD_A_SUSPEND_ENABLED BIT(2)
+#define CMD_A_ALLOW_WRITE BIT(7)
+#define CMD_B 0x31
+#define CMD_C 0x33
+
+/* Interrupt Status registers */
+#define IRQSTAT_A 0x35
+#define IRQSTAT_C 0x37
+#define IRQSTAT_C_TERMINATION_STAT BIT(0)
+#define IRQSTAT_C_TERMINATION_IRQ BIT(1)
+#define IRQSTAT_C_TAPER_IRQ BIT(3)
+#define IRQSTAT_D 0x38
+#define IRQSTAT_D_CHARGE_TIMEOUT_STAT BIT(2)
+#define IRQSTAT_D_CHARGE_TIMEOUT_IRQ BIT(3)
+#define IRQSTAT_E 0x39
+#define IRQSTAT_E_USBIN_UV_STAT BIT(0)
+#define IRQSTAT_E_USBIN_UV_IRQ BIT(1)
+#define IRQSTAT_E_DCIN_UV_STAT BIT(4)
+#define IRQSTAT_E_DCIN_UV_IRQ BIT(5)
+#define IRQSTAT_F 0x3a
+
+/* Status registers */
+#define STAT_A 0x3b
+#define STAT_A_FLOAT_VOLTAGE_MASK 0x3f
+#define STAT_B 0x3c
+#define STAT_C 0x3d
+#define STAT_C_CHG_ENABLED BIT(0)
+#define STAT_C_HOLDOFF_STAT BIT(3)
+#define STAT_C_CHG_MASK 0x06
+#define STAT_C_CHG_SHIFT 1
+#define STAT_C_CHG_TERM BIT(5)
+#define STAT_C_CHARGER_ERROR BIT(6)
+#define STAT_E 0x3f
+
+#define SMB347_MAX_REGISTER 0x3f
+
+/**
+ * struct smb347_charger - smb347 charger instance
+ * @dev: pointer to device
+ * @regmap: pointer to driver regmap
+ * @mains: power_supply instance for AC/DC power
+ * @usb: power_supply instance for USB power
+ * @id: SMB charger ID
+ * @mains_online: is AC/DC input connected
+ * @usb_online: is USB input connected
+ * @charging_enabled: is charging enabled
+ * @irq_unsupported: is interrupt unsupported by SMB hardware
+ * @max_charge_current: maximum current (in uA) the battery can be charged
+ * @max_charge_voltage: maximum voltage (in uV) the battery can be charged
+ * @pre_charge_current: current (in uA) to use in pre-charging phase
+ * @termination_current: current (in uA) used to determine when the
+ * charging cycle terminates
+ * @pre_to_fast_voltage: voltage (in uV) treshold used for transitioning to
+ * pre-charge to fast charge mode
+ * @mains_current_limit: maximum input current drawn from AC/DC input (in uA)
+ * @usb_hc_current_limit: maximum input high current (in uA) drawn from USB
+ * input
+ * @chip_temp_threshold: die temperature where device starts limiting charge
+ * current [%100 - %130] (in degree C)
+ * @soft_cold_temp_limit: soft cold temperature limit [%0 - %15] (in degree C),
+ * granularity is 5 deg C.
+ * @soft_hot_temp_limit: soft hot temperature limit [%40 - %55] (in degree C),
+ * granularity is 5 deg C.
+ * @hard_cold_temp_limit: hard cold temperature limit [%-5 - %10] (in degree C),
+ * granularity is 5 deg C.
+ * @hard_hot_temp_limit: hard hot temperature limit [%50 - %65] (in degree C),
+ * granularity is 5 deg C.
+ * @suspend_on_hard_temp_limit: suspend charging when hard limit is hit
+ * @soft_temp_limit_compensation: compensation method when soft temperature
+ * limit is hit
+ * @charge_current_compensation: current (in uA) for charging compensation
+ * current when temperature hits soft limits
+ * @use_mains: AC/DC input can be used
+ * @use_usb: USB input can be used
+ * @use_usb_otg: USB OTG output can be used (not implemented yet)
+ * @enable_control: how charging enable/disable is controlled
+ * (driver/pin controls)
+ *
+ * @use_main, @use_usb, and @use_usb_otg are means to enable/disable
+ * hardware support for these. This is useful when we want to have for
+ * example OTG charging controlled via OTG transceiver driver and not by
+ * the SMB347 hardware.
+ *
+ * Hard and soft temperature limit values are given as described in the
+ * device data sheet and assuming NTC beta value is %3750. Even if this is
+ * not the case, these values should be used. They can be mapped to the
+ * corresponding NTC beta values with the help of table %2 in the data
+ * sheet. So for example if NTC beta is %3375 and we want to program hard
+ * hot limit to be %53 deg C, @hard_hot_temp_limit should be set to %50.
+ *
+ * If zero value is given in any of the current and voltage values, the
+ * factory programmed default will be used. For soft/hard temperature
+ * values, pass in %SMB3XX_TEMP_USE_DEFAULT instead.
+ */
+struct smb347_charger {
+ struct device *dev;
+ struct regmap *regmap;
+ struct power_supply *mains;
+ struct power_supply *usb;
+ unsigned int id;
+ bool mains_online;
+ bool usb_online;
+ bool charging_enabled;
+ bool irq_unsupported;
+
+ unsigned int max_charge_current;
+ unsigned int max_charge_voltage;
+ unsigned int pre_charge_current;
+ unsigned int termination_current;
+ unsigned int pre_to_fast_voltage;
+ unsigned int mains_current_limit;
+ unsigned int usb_hc_current_limit;
+ unsigned int chip_temp_threshold;
+ int soft_cold_temp_limit;
+ int soft_hot_temp_limit;
+ int hard_cold_temp_limit;
+ int hard_hot_temp_limit;
+ bool suspend_on_hard_temp_limit;
+ unsigned int soft_temp_limit_compensation;
+ unsigned int charge_current_compensation;
+ bool use_mains;
+ bool use_usb;
+ bool use_usb_otg;
+ unsigned int enable_control;
+};
+
+enum smb_charger_chipid {
+ SMB345,
+ SMB347,
+ SMB358,
+ NUM_CHIP_TYPES,
+};
+
+/* Fast charge current in uA */
+static const unsigned int fcc_tbl[NUM_CHIP_TYPES][8] = {
+ [SMB345] = { 200000, 450000, 600000, 900000,
+ 1300000, 1500000, 1800000, 2000000 },
+ [SMB347] = { 700000, 900000, 1200000, 1500000,
+ 1800000, 2000000, 2200000, 2500000 },
+ [SMB358] = { 200000, 450000, 600000, 900000,
+ 1300000, 1500000, 1800000, 2000000 },
+};
+/* Pre-charge current in uA */
+static const unsigned int pcc_tbl[NUM_CHIP_TYPES][4] = {
+ [SMB345] = { 150000, 250000, 350000, 450000 },
+ [SMB347] = { 100000, 150000, 200000, 250000 },
+ [SMB358] = { 150000, 250000, 350000, 450000 },
+};
+
+/* Termination current in uA */
+static const unsigned int tc_tbl[NUM_CHIP_TYPES][8] = {
+ [SMB345] = { 30000, 40000, 60000, 80000,
+ 100000, 125000, 150000, 200000 },
+ [SMB347] = { 37500, 50000, 100000, 150000,
+ 200000, 250000, 500000, 600000 },
+ [SMB358] = { 30000, 40000, 60000, 80000,
+ 100000, 125000, 150000, 200000 },
+};
+
+/* Input current limit in uA */
+static const unsigned int icl_tbl[NUM_CHIP_TYPES][10] = {
+ [SMB345] = { 300000, 500000, 700000, 1000000, 1500000,
+ 1800000, 2000000, 2000000, 2000000, 2000000 },
+ [SMB347] = { 300000, 500000, 700000, 900000, 1200000,
+ 1500000, 1800000, 2000000, 2200000, 2500000 },
+ [SMB358] = { 300000, 500000, 700000, 1000000, 1500000,
+ 1800000, 2000000, 2000000, 2000000, 2000000 },
+};
+
+/* Charge current compensation in uA */
+static const unsigned int ccc_tbl[NUM_CHIP_TYPES][4] = {
+ [SMB345] = { 200000, 450000, 600000, 900000 },
+ [SMB347] = { 250000, 700000, 900000, 1200000 },
+ [SMB358] = { 200000, 450000, 600000, 900000 },
+};
+
+/* Convert register value to current using lookup table */
+static int hw_to_current(const unsigned int *tbl, size_t size, unsigned int val)
+{
+ if (val >= size)
+ return -EINVAL;
+ return tbl[val];
+}
+
+/* Convert current to register value using lookup table */
+static int current_to_hw(const unsigned int *tbl, size_t size, unsigned int val)
+{
+ size_t i;
+
+ for (i = 0; i < size; i++)
+ if (val < tbl[i])
+ break;
+ return i > 0 ? i - 1 : -EINVAL;
+}
+
+/**
+ * smb347_update_ps_status - refreshes the power source status
+ * @smb: pointer to smb347 charger instance
+ *
+ * Function checks whether any power source is connected to the charger and
+ * updates internal state accordingly. If there is a change to previous state
+ * function returns %1, otherwise %0 and negative errno in case of errror.
+ */
+static int smb347_update_ps_status(struct smb347_charger *smb)
+{
+ bool usb = false;
+ bool dc = false;
+ unsigned int val;
+ int ret;
+
+ ret = regmap_read(smb->regmap, IRQSTAT_E, &val);
+ if (ret < 0)
+ return ret;
+
+ /*
+ * Dc and usb are set depending on whether they are enabled in
+ * platform data _and_ whether corresponding undervoltage is set.
+ */
+ if (smb->use_mains)
+ dc = !(val & IRQSTAT_E_DCIN_UV_STAT);
+ if (smb->use_usb)
+ usb = !(val & IRQSTAT_E_USBIN_UV_STAT);
+
+ ret = smb->mains_online != dc || smb->usb_online != usb;
+ smb->mains_online = dc;
+ smb->usb_online = usb;
+
+ return ret;
+}
+
+/*
+ * smb347_is_ps_online - returns whether input power source is connected
+ * @smb: pointer to smb347 charger instance
+ *
+ * Returns %true if input power source is connected. Note that this is
+ * dependent on what platform has configured for usable power sources. For
+ * example if USB is disabled, this will return %false even if the USB cable
+ * is connected.
+ */
+static bool smb347_is_ps_online(struct smb347_charger *smb)
+{
+ return smb->usb_online || smb->mains_online;
+}
+
+/**
+ * smb347_charging_status - returns status of charging
+ * @smb: pointer to smb347 charger instance
+ *
+ * Function returns charging status. %0 means no charging is in progress,
+ * %1 means pre-charging, %2 fast-charging and %3 taper-charging.
+ */
+static int smb347_charging_status(struct smb347_charger *smb)
+{
+ unsigned int val;
+ int ret;
+
+ if (!smb347_is_ps_online(smb))
+ return 0;
+
+ ret = regmap_read(smb->regmap, STAT_C, &val);
+ if (ret < 0)
+ return 0;
+
+ return (val & STAT_C_CHG_MASK) >> STAT_C_CHG_SHIFT;
+}
+
+static int smb347_charging_set(struct smb347_charger *smb, bool enable)
+{
+ int ret = 0;
+
+ if (smb->enable_control != SMB3XX_CHG_ENABLE_SW) {
+ dev_dbg(smb->dev, "charging enable/disable in SW disabled\n");
+ return 0;
+ }
+
+ if (smb->charging_enabled != enable) {
+ ret = regmap_update_bits(smb->regmap, CMD_A, CMD_A_CHG_ENABLED,
+ enable ? CMD_A_CHG_ENABLED : 0);
+ if (!ret)
+ smb->charging_enabled = enable;
+ }
+
+ return ret;
+}
+
+static inline int smb347_charging_enable(struct smb347_charger *smb)
+{
+ return smb347_charging_set(smb, true);
+}
+
+static inline int smb347_charging_disable(struct smb347_charger *smb)
+{
+ return smb347_charging_set(smb, false);
+}
+
+static int smb347_start_stop_charging(struct smb347_charger *smb)
+{
+ int ret;
+
+ /*
+ * Depending on whether valid power source is connected or not, we
+ * disable or enable the charging. We do it manually because it
+ * depends on how the platform has configured the valid inputs.
+ */
+ if (smb347_is_ps_online(smb)) {
+ ret = smb347_charging_enable(smb);
+ if (ret < 0)
+ dev_err(smb->dev, "failed to enable charging\n");
+ } else {
+ ret = smb347_charging_disable(smb);
+ if (ret < 0)
+ dev_err(smb->dev, "failed to disable charging\n");
+ }
+
+ return ret;
+}
+
+static int smb347_set_charge_current(struct smb347_charger *smb)
+{
+ unsigned int id = smb->id;
+ int ret;
+
+ if (smb->max_charge_current) {
+ ret = current_to_hw(fcc_tbl[id], ARRAY_SIZE(fcc_tbl[id]),
+ smb->max_charge_current);
+ if (ret < 0)
+ return ret;
+
+ ret = regmap_update_bits(smb->regmap, CFG_CHARGE_CURRENT,
+ CFG_CHARGE_CURRENT_FCC_MASK,
+ ret << CFG_CHARGE_CURRENT_FCC_SHIFT);
+ if (ret < 0)
+ return ret;
+ }
+
+ if (smb->pre_charge_current) {
+ ret = current_to_hw(pcc_tbl[id], ARRAY_SIZE(pcc_tbl[id]),
+ smb->pre_charge_current);
+ if (ret < 0)
+ return ret;
+
+ ret = regmap_update_bits(smb->regmap, CFG_CHARGE_CURRENT,
+ CFG_CHARGE_CURRENT_PCC_MASK,
+ ret << CFG_CHARGE_CURRENT_PCC_SHIFT);
+ if (ret < 0)
+ return ret;
+ }
+
+ if (smb->termination_current) {
+ ret = current_to_hw(tc_tbl[id], ARRAY_SIZE(tc_tbl[id]),
+ smb->termination_current);
+ if (ret < 0)
+ return ret;
+
+ ret = regmap_update_bits(smb->regmap, CFG_CHARGE_CURRENT,
+ CFG_CHARGE_CURRENT_TC_MASK, ret);
+ if (ret < 0)
+ return ret;
+ }
+
+ return 0;
+}
+
+static int smb347_set_current_limits(struct smb347_charger *smb)
+{
+ unsigned int id = smb->id;
+ int ret;
+
+ if (smb->mains_current_limit) {
+ ret = current_to_hw(icl_tbl[id], ARRAY_SIZE(icl_tbl[id]),
+ smb->mains_current_limit);
+ if (ret < 0)
+ return ret;
+
+ ret = regmap_update_bits(smb->regmap, CFG_CURRENT_LIMIT,
+ CFG_CURRENT_LIMIT_DC_MASK,
+ ret << CFG_CURRENT_LIMIT_DC_SHIFT);
+ if (ret < 0)
+ return ret;
+ }
+
+ if (smb->usb_hc_current_limit) {
+ ret = current_to_hw(icl_tbl[id], ARRAY_SIZE(icl_tbl[id]),
+ smb->usb_hc_current_limit);
+ if (ret < 0)
+ return ret;
+
+ ret = regmap_update_bits(smb->regmap, CFG_CURRENT_LIMIT,
+ CFG_CURRENT_LIMIT_USB_MASK, ret);
+ if (ret < 0)
+ return ret;
+ }
+
+ return 0;
+}
+
+static int smb347_set_voltage_limits(struct smb347_charger *smb)
+{
+ int ret;
+
+ if (smb->pre_to_fast_voltage) {
+ ret = smb->pre_to_fast_voltage;
+
+ /* uV */
+ ret = clamp_val(ret, 2400000, 3000000) - 2400000;
+ ret /= 200000;
+
+ ret = regmap_update_bits(smb->regmap, CFG_FLOAT_VOLTAGE,
+ CFG_FLOAT_VOLTAGE_THRESHOLD_MASK,
+ ret << CFG_FLOAT_VOLTAGE_THRESHOLD_SHIFT);
+ if (ret < 0)
+ return ret;
+ }
+
+ if (smb->max_charge_voltage) {
+ ret = smb->max_charge_voltage;
+
+ /* uV */
+ ret = clamp_val(ret, 3500000, 4500000) - 3500000;
+ ret /= 20000;
+
+ ret = regmap_update_bits(smb->regmap, CFG_FLOAT_VOLTAGE,
+ CFG_FLOAT_VOLTAGE_FLOAT_MASK, ret);
+ if (ret < 0)
+ return ret;
+ }
+
+ return 0;
+}
+
+static int smb347_set_temp_limits(struct smb347_charger *smb)
+{
+ unsigned int id = smb->id;
+ bool enable_therm_monitor = false;
+ int ret = 0;
+ int val;
+
+ if (smb->chip_temp_threshold) {
+ val = smb->chip_temp_threshold;
+
+ /* degree C */
+ val = clamp_val(val, 100, 130) - 100;
+ val /= 10;
+
+ ret = regmap_update_bits(smb->regmap, CFG_OTG,
+ CFG_OTG_TEMP_THRESHOLD_MASK,
+ val << CFG_OTG_TEMP_THRESHOLD_SHIFT);
+ if (ret < 0)
+ return ret;
+ }
+
+ if (smb->soft_cold_temp_limit != SMB3XX_TEMP_USE_DEFAULT) {
+ val = smb->soft_cold_temp_limit;
+
+ val = clamp_val(val, 0, 15);
+ val /= 5;
+ /* this goes from higher to lower so invert the value */
+ val = ~val & 0x3;
+
+ ret = regmap_update_bits(smb->regmap, CFG_TEMP_LIMIT,
+ CFG_TEMP_LIMIT_SOFT_COLD_MASK,
+ val << CFG_TEMP_LIMIT_SOFT_COLD_SHIFT);
+ if (ret < 0)
+ return ret;
+
+ enable_therm_monitor = true;
+ }
+
+ if (smb->soft_hot_temp_limit != SMB3XX_TEMP_USE_DEFAULT) {
+ val = smb->soft_hot_temp_limit;
+
+ val = clamp_val(val, 40, 55) - 40;
+ val /= 5;
+
+ ret = regmap_update_bits(smb->regmap, CFG_TEMP_LIMIT,
+ CFG_TEMP_LIMIT_SOFT_HOT_MASK,
+ val << CFG_TEMP_LIMIT_SOFT_HOT_SHIFT);
+ if (ret < 0)
+ return ret;
+
+ enable_therm_monitor = true;
+ }
+
+ if (smb->hard_cold_temp_limit != SMB3XX_TEMP_USE_DEFAULT) {
+ val = smb->hard_cold_temp_limit;
+
+ val = clamp_val(val, -5, 10) + 5;
+ val /= 5;
+ /* this goes from higher to lower so invert the value */
+ val = ~val & 0x3;
+
+ ret = regmap_update_bits(smb->regmap, CFG_TEMP_LIMIT,
+ CFG_TEMP_LIMIT_HARD_COLD_MASK,
+ val << CFG_TEMP_LIMIT_HARD_COLD_SHIFT);
+ if (ret < 0)
+ return ret;
+
+ enable_therm_monitor = true;
+ }
+
+ if (smb->hard_hot_temp_limit != SMB3XX_TEMP_USE_DEFAULT) {
+ val = smb->hard_hot_temp_limit;
+
+ val = clamp_val(val, 50, 65) - 50;
+ val /= 5;
+
+ ret = regmap_update_bits(smb->regmap, CFG_TEMP_LIMIT,
+ CFG_TEMP_LIMIT_HARD_HOT_MASK,
+ val << CFG_TEMP_LIMIT_HARD_HOT_SHIFT);
+ if (ret < 0)
+ return ret;
+
+ enable_therm_monitor = true;
+ }
+
+ /*
+ * If any of the temperature limits are set, we also enable the
+ * thermistor monitoring.
+ *
+ * When soft limits are hit, the device will start to compensate
+ * current and/or voltage depending on the configuration.
+ *
+ * When hard limit is hit, the device will suspend charging
+ * depending on the configuration.
+ */
+ if (enable_therm_monitor) {
+ ret = regmap_update_bits(smb->regmap, CFG_THERM,
+ CFG_THERM_MONITOR_DISABLED, 0);
+ if (ret < 0)
+ return ret;
+ }
+
+ if (smb->suspend_on_hard_temp_limit) {
+ ret = regmap_update_bits(smb->regmap, CFG_SYSOK,
+ CFG_SYSOK_SUSPEND_HARD_LIMIT_DISABLED, 0);
+ if (ret < 0)
+ return ret;
+ }
+
+ if (smb->soft_temp_limit_compensation !=
+ SMB3XX_SOFT_TEMP_COMPENSATE_DEFAULT) {
+ val = smb->soft_temp_limit_compensation & 0x3;
+
+ ret = regmap_update_bits(smb->regmap, CFG_THERM,
+ CFG_THERM_SOFT_HOT_COMPENSATION_MASK,
+ val << CFG_THERM_SOFT_HOT_COMPENSATION_SHIFT);
+ if (ret < 0)
+ return ret;
+
+ ret = regmap_update_bits(smb->regmap, CFG_THERM,
+ CFG_THERM_SOFT_COLD_COMPENSATION_MASK,
+ val << CFG_THERM_SOFT_COLD_COMPENSATION_SHIFT);
+ if (ret < 0)
+ return ret;
+ }
+
+ if (smb->charge_current_compensation) {
+ val = current_to_hw(ccc_tbl[id], ARRAY_SIZE(ccc_tbl[id]),
+ smb->charge_current_compensation);
+ if (val < 0)
+ return val;
+
+ ret = regmap_update_bits(smb->regmap, CFG_OTG,
+ CFG_OTG_CC_COMPENSATION_MASK,
+ (val & 0x3) << CFG_OTG_CC_COMPENSATION_SHIFT);
+ if (ret < 0)
+ return ret;
+ }
+
+ return ret;
+}
+
+/*
+ * smb347_set_writable - enables/disables writing to non-volatile registers
+ * @smb: pointer to smb347 charger instance
+ *
+ * You can enable/disable writing to the non-volatile configuration
+ * registers by calling this function.
+ *
+ * Returns %0 on success and negative errno in case of failure.
+ */
+static int smb347_set_writable(struct smb347_charger *smb, bool writable)
+{
+ return regmap_update_bits(smb->regmap, CMD_A, CMD_A_ALLOW_WRITE,
+ writable ? CMD_A_ALLOW_WRITE : 0);
+}
+
+static int smb347_hw_init(struct smb347_charger *smb)
+{
+ unsigned int val;
+ int ret;
+
+ ret = smb347_set_writable(smb, true);
+ if (ret < 0)
+ return ret;
+
+ /*
+ * Program the platform specific configuration values to the device
+ * first.
+ */
+ ret = smb347_set_charge_current(smb);
+ if (ret < 0)
+ goto fail;
+
+ ret = smb347_set_current_limits(smb);
+ if (ret < 0)
+ goto fail;
+
+ ret = smb347_set_voltage_limits(smb);
+ if (ret < 0)
+ goto fail;
+
+ ret = smb347_set_temp_limits(smb);
+ if (ret < 0)
+ goto fail;
+
+ /* If USB charging is disabled we put the USB in suspend mode */
+ if (!smb->use_usb) {
+ ret = regmap_update_bits(smb->regmap, CMD_A,
+ CMD_A_SUSPEND_ENABLED,
+ CMD_A_SUSPEND_ENABLED);
+ if (ret < 0)
+ goto fail;
+ }
+
+ /*
+ * If configured by platform data, we enable hardware Auto-OTG
+ * support for driving VBUS. Otherwise we disable it.
+ */
+ ret = regmap_update_bits(smb->regmap, CFG_OTHER, CFG_OTHER_RID_MASK,
+ smb->use_usb_otg ? CFG_OTHER_RID_ENABLED_AUTO_OTG : 0);
+ if (ret < 0)
+ goto fail;
+
+ /* Activate pin control, making it writable. */
+ switch (smb->enable_control) {
+ case SMB3XX_CHG_ENABLE_PIN_ACTIVE_LOW:
+ case SMB3XX_CHG_ENABLE_PIN_ACTIVE_HIGH:
+ ret = regmap_set_bits(smb->regmap, CFG_PIN, CFG_PIN_EN_CTRL);
+ if (ret < 0)
+ goto fail;
+ }
+
+ /*
+ * Make the charging functionality controllable by a write to the
+ * command register unless pin control is specified in the platform
+ * data.
+ */
+ switch (smb->enable_control) {
+ case SMB3XX_CHG_ENABLE_PIN_ACTIVE_LOW:
+ val = CFG_PIN_EN_CTRL_ACTIVE_LOW;
+ break;
+ case SMB3XX_CHG_ENABLE_PIN_ACTIVE_HIGH:
+ val = CFG_PIN_EN_CTRL_ACTIVE_HIGH;
+ break;
+ default:
+ val = 0;
+ break;
+ }
+
+ ret = regmap_update_bits(smb->regmap, CFG_PIN, CFG_PIN_EN_CTRL_MASK,
+ val);
+ if (ret < 0)
+ goto fail;
+
+ /* Disable Automatic Power Source Detection (APSD) interrupt. */
+ ret = regmap_update_bits(smb->regmap, CFG_PIN, CFG_PIN_EN_APSD_IRQ, 0);
+ if (ret < 0)
+ goto fail;
+
+ ret = smb347_update_ps_status(smb);
+ if (ret < 0)
+ goto fail;
+
+ ret = smb347_start_stop_charging(smb);
+
+fail:
+ smb347_set_writable(smb, false);
+ return ret;
+}
+
+static irqreturn_t smb347_interrupt(int irq, void *data)
+{
+ struct smb347_charger *smb = data;
+ unsigned int stat_c, irqstat_c, irqstat_d, irqstat_e;
+ bool handled = false;
+ int ret;
+
+ /* SMB347 it needs at least 20ms for setting IRQSTAT_E_*IN_UV_IRQ */
+ usleep_range(25000, 35000);
+
+ ret = regmap_read(smb->regmap, STAT_C, &stat_c);
+ if (ret < 0) {
+ dev_warn(smb->dev, "reading STAT_C failed\n");
+ return IRQ_NONE;
+ }
+
+ ret = regmap_read(smb->regmap, IRQSTAT_C, &irqstat_c);
+ if (ret < 0) {
+ dev_warn(smb->dev, "reading IRQSTAT_C failed\n");
+ return IRQ_NONE;
+ }
+
+ ret = regmap_read(smb->regmap, IRQSTAT_D, &irqstat_d);
+ if (ret < 0) {
+ dev_warn(smb->dev, "reading IRQSTAT_D failed\n");
+ return IRQ_NONE;
+ }
+
+ ret = regmap_read(smb->regmap, IRQSTAT_E, &irqstat_e);
+ if (ret < 0) {
+ dev_warn(smb->dev, "reading IRQSTAT_E failed\n");
+ return IRQ_NONE;
+ }
+
+ /*
+ * If we get charger error we report the error back to user.
+ * If the error is recovered charging will resume again.
+ */
+ if (stat_c & STAT_C_CHARGER_ERROR) {
+ dev_err(smb->dev, "charging stopped due to charger error\n");
+ if (smb->use_mains)
+ power_supply_changed(smb->mains);
+ if (smb->use_usb)
+ power_supply_changed(smb->usb);
+ handled = true;
+ }
+
+ /*
+ * If we reached the termination current the battery is charged and
+ * we can update the status now. Charging is automatically
+ * disabled by the hardware.
+ */
+ if (irqstat_c & (IRQSTAT_C_TERMINATION_IRQ | IRQSTAT_C_TAPER_IRQ)) {
+ if (irqstat_c & IRQSTAT_C_TERMINATION_STAT) {
+ if (smb->use_mains)
+ power_supply_changed(smb->mains);
+ if (smb->use_usb)
+ power_supply_changed(smb->usb);
+ }
+ dev_dbg(smb->dev, "going to HW maintenance mode\n");
+ handled = true;
+ }
+
+ /*
+ * If we got a charger timeout INT that means the charge
+ * full is not detected with in charge timeout value.
+ */
+ if (irqstat_d & IRQSTAT_D_CHARGE_TIMEOUT_IRQ) {
+ dev_dbg(smb->dev, "total Charge Timeout INT received\n");
+
+ if (irqstat_d & IRQSTAT_D_CHARGE_TIMEOUT_STAT)
+ dev_warn(smb->dev, "charging stopped due to timeout\n");
+ if (smb->use_mains)
+ power_supply_changed(smb->mains);
+ if (smb->use_usb)
+ power_supply_changed(smb->usb);
+ handled = true;
+ }
+
+ /*
+ * If we got an under voltage interrupt it means that AC/USB input
+ * was connected or disconnected.
+ */
+ if (irqstat_e & (IRQSTAT_E_USBIN_UV_IRQ | IRQSTAT_E_DCIN_UV_IRQ)) {
+ if (smb347_update_ps_status(smb) > 0) {
+ smb347_start_stop_charging(smb);
+ if (smb->use_mains)
+ power_supply_changed(smb->mains);
+ if (smb->use_usb)
+ power_supply_changed(smb->usb);
+ }
+ handled = true;
+ }
+
+ return handled ? IRQ_HANDLED : IRQ_NONE;
+}
+
+static int smb347_irq_set(struct smb347_charger *smb, bool enable)
+{
+ int ret;
+
+ if (smb->irq_unsupported)
+ return 0;
+
+ ret = smb347_set_writable(smb, true);
+ if (ret < 0)
+ return ret;
+
+ /*
+ * Enable/disable interrupts for:
+ * - under voltage
+ * - termination current reached
+ * - charger timeout
+ * - charger error
+ */
+ ret = regmap_update_bits(smb->regmap, CFG_FAULT_IRQ, 0xff,
+ enable ? CFG_FAULT_IRQ_DCIN_UV : 0);
+ if (ret < 0)
+ goto fail;
+
+ ret = regmap_update_bits(smb->regmap, CFG_STATUS_IRQ, 0xff,
+ enable ? (CFG_STATUS_IRQ_TERMINATION_OR_TAPER |
+ CFG_STATUS_IRQ_CHARGE_TIMEOUT) : 0);
+ if (ret < 0)
+ goto fail;
+
+ ret = regmap_update_bits(smb->regmap, CFG_PIN, CFG_PIN_EN_CHARGER_ERROR,
+ enable ? CFG_PIN_EN_CHARGER_ERROR : 0);
+fail:
+ smb347_set_writable(smb, false);
+ return ret;
+}
+
+static inline int smb347_irq_enable(struct smb347_charger *smb)
+{
+ return smb347_irq_set(smb, true);
+}
+
+static inline int smb347_irq_disable(struct smb347_charger *smb)
+{
+ return smb347_irq_set(smb, false);
+}
+
+static int smb347_irq_init(struct smb347_charger *smb,
+ struct i2c_client *client)
+{
+ int ret;
+
+ ret = devm_request_threaded_irq(smb->dev, client->irq, NULL,
+ smb347_interrupt, IRQF_ONESHOT,
+ client->name, smb);
+ if (ret < 0)
+ return ret;
+
+ ret = smb347_set_writable(smb, true);
+ if (ret < 0)
+ return ret;
+
+ /*
+ * Configure the STAT output to be suitable for interrupts: disable
+ * all other output (except interrupts) and make it active low.
+ */
+ ret = regmap_update_bits(smb->regmap, CFG_STAT,
+ CFG_STAT_ACTIVE_HIGH | CFG_STAT_DISABLED,
+ CFG_STAT_DISABLED);
+
+ smb347_set_writable(smb, false);
+
+ return ret;
+}
+
+/*
+ * Returns the constant charge current programmed
+ * into the charger in uA.
+ */
+static int get_const_charge_current(struct smb347_charger *smb)
+{
+ unsigned int id = smb->id;
+ int ret, intval;
+ unsigned int v;
+
+ if (!smb347_is_ps_online(smb))
+ return -ENODATA;
+
+ ret = regmap_read(smb->regmap, STAT_B, &v);
+ if (ret < 0)
+ return ret;
+
+ /*
+ * The current value is composition of FCC and PCC values
+ * and we can detect which table to use from bit 5.
+ */
+ if (v & 0x20) {
+ intval = hw_to_current(fcc_tbl[id],
+ ARRAY_SIZE(fcc_tbl[id]), v & 7);
+ } else {
+ v >>= 3;
+ intval = hw_to_current(pcc_tbl[id],
+ ARRAY_SIZE(pcc_tbl[id]), v & 7);
+ }
+
+ return intval;
+}
+
+/*
+ * Returns the constant charge voltage programmed
+ * into the charger in uV.
+ */
+static int get_const_charge_voltage(struct smb347_charger *smb)
+{
+ int ret, intval;
+ unsigned int v;
+
+ if (!smb347_is_ps_online(smb))
+ return -ENODATA;
+
+ ret = regmap_read(smb->regmap, STAT_A, &v);
+ if (ret < 0)
+ return ret;
+
+ v &= STAT_A_FLOAT_VOLTAGE_MASK;
+ if (v > 0x3d)
+ v = 0x3d;
+
+ intval = 3500000 + v * 20000;
+
+ return intval;
+}
+
+static int smb347_get_charging_status(struct smb347_charger *smb,
+ struct power_supply *psy)
+{
+ int ret, status;
+ unsigned int val;
+
+ if (psy->desc->type == POWER_SUPPLY_TYPE_USB) {
+ if (!smb->usb_online)
+ return POWER_SUPPLY_STATUS_DISCHARGING;
+ } else {
+ if (!smb->mains_online)
+ return POWER_SUPPLY_STATUS_DISCHARGING;
+ }
+
+ ret = regmap_read(smb->regmap, STAT_C, &val);
+ if (ret < 0)
+ return ret;
+
+ if ((val & STAT_C_CHARGER_ERROR) ||
+ (val & STAT_C_HOLDOFF_STAT)) {
+ /*
+ * set to NOT CHARGING upon charger error
+ * or charging has stopped.
+ */
+ status = POWER_SUPPLY_STATUS_NOT_CHARGING;
+ } else {
+ if ((val & STAT_C_CHG_MASK) >> STAT_C_CHG_SHIFT) {
+ /*
+ * set to charging if battery is in pre-charge,
+ * fast charge or taper charging mode.
+ */
+ status = POWER_SUPPLY_STATUS_CHARGING;
+ } else if (val & STAT_C_CHG_TERM) {
+ /*
+ * set the status to FULL if battery is not in pre
+ * charge, fast charge or taper charging mode AND
+ * charging is terminated at least once.
+ */
+ status = POWER_SUPPLY_STATUS_FULL;
+ } else {
+ /*
+ * in this case no charger error or termination
+ * occured but charging is not in progress!!!
+ */
+ status = POWER_SUPPLY_STATUS_NOT_CHARGING;
+ }
+ }
+
+ return status;
+}
+
+static int smb347_get_property_locked(struct power_supply *psy,
+ enum power_supply_property prop,
+ union power_supply_propval *val)
+{
+ struct smb347_charger *smb = power_supply_get_drvdata(psy);
+ int ret;
+
+ switch (prop) {
+ case POWER_SUPPLY_PROP_STATUS:
+ ret = smb347_get_charging_status(smb, psy);
+ if (ret < 0)
+ return ret;
+ val->intval = ret;
+ break;
+
+ case POWER_SUPPLY_PROP_CHARGE_TYPE:
+ if (psy->desc->type == POWER_SUPPLY_TYPE_USB) {
+ if (!smb->usb_online)
+ return -ENODATA;
+ } else {
+ if (!smb->mains_online)
+ return -ENODATA;
+ }
+
+ /*
+ * We handle trickle and pre-charging the same, and taper
+ * and none the same.
+ */
+ switch (smb347_charging_status(smb)) {
+ case 1:
+ val->intval = POWER_SUPPLY_CHARGE_TYPE_TRICKLE;
+ break;
+ case 2:
+ val->intval = POWER_SUPPLY_CHARGE_TYPE_FAST;
+ break;
+ default:
+ val->intval = POWER_SUPPLY_CHARGE_TYPE_NONE;
+ break;
+ }
+ break;
+
+ case POWER_SUPPLY_PROP_ONLINE:
+ if (psy->desc->type == POWER_SUPPLY_TYPE_USB)
+ val->intval = smb->usb_online;
+ else
+ val->intval = smb->mains_online;
+ break;
+
+ case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE:
+ ret = get_const_charge_voltage(smb);
+ if (ret < 0)
+ return ret;
+ val->intval = ret;
+ break;
+
+ case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT:
+ ret = get_const_charge_current(smb);
+ if (ret < 0)
+ return ret;
+ val->intval = ret;
+ break;
+
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int smb347_get_property(struct power_supply *psy,
+ enum power_supply_property prop,
+ union power_supply_propval *val)
+{
+ struct smb347_charger *smb = power_supply_get_drvdata(psy);
+ struct i2c_client *client = to_i2c_client(smb->dev);
+ int ret;
+
+ disable_irq(client->irq);
+ ret = smb347_get_property_locked(psy, prop, val);
+ enable_irq(client->irq);
+
+ return ret;
+}
+
+static enum power_supply_property smb347_properties[] = {
+ POWER_SUPPLY_PROP_STATUS,
+ POWER_SUPPLY_PROP_CHARGE_TYPE,
+ POWER_SUPPLY_PROP_ONLINE,
+ POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT,
+ POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE,
+};
+
+static bool smb347_volatile_reg(struct device *dev, unsigned int reg)
+{
+ switch (reg) {
+ case IRQSTAT_A:
+ case IRQSTAT_C:
+ case IRQSTAT_D:
+ case IRQSTAT_E:
+ case IRQSTAT_F:
+ case STAT_A:
+ case STAT_B:
+ case STAT_C:
+ case STAT_E:
+ return true;
+ }
+
+ return false;
+}
+
+static bool smb347_readable_reg(struct device *dev, unsigned int reg)
+{
+ switch (reg) {
+ case CFG_CHARGE_CURRENT:
+ case CFG_CURRENT_LIMIT:
+ case CFG_FLOAT_VOLTAGE:
+ case CFG_STAT:
+ case CFG_PIN:
+ case CFG_THERM:
+ case CFG_SYSOK:
+ case CFG_OTHER:
+ case CFG_OTG:
+ case CFG_TEMP_LIMIT:
+ case CFG_FAULT_IRQ:
+ case CFG_STATUS_IRQ:
+ case CFG_ADDRESS:
+ case CMD_A:
+ case CMD_B:
+ case CMD_C:
+ return true;
+ }
+
+ return smb347_volatile_reg(dev, reg);
+}
+
+static void smb347_dt_parse_dev_info(struct smb347_charger *smb)
+{
+ struct device *dev = smb->dev;
+
+ smb->soft_temp_limit_compensation =
+ SMB3XX_SOFT_TEMP_COMPENSATE_DEFAULT;
+ /*
+ * These properties come from the battery info, still we need to
+ * pre-initialize the values. See smb347_get_battery_info() below.
+ */
+ smb->soft_cold_temp_limit = SMB3XX_TEMP_USE_DEFAULT;
+ smb->hard_cold_temp_limit = SMB3XX_TEMP_USE_DEFAULT;
+ smb->soft_hot_temp_limit = SMB3XX_TEMP_USE_DEFAULT;
+ smb->hard_hot_temp_limit = SMB3XX_TEMP_USE_DEFAULT;
+
+ /* Charging constraints */
+ device_property_read_u32(dev, "summit,fast-voltage-threshold-microvolt",
+ &smb->pre_to_fast_voltage);
+ device_property_read_u32(dev, "summit,mains-current-limit-microamp",
+ &smb->mains_current_limit);
+ device_property_read_u32(dev, "summit,usb-current-limit-microamp",
+ &smb->usb_hc_current_limit);
+
+ /* For thermometer monitoring */
+ device_property_read_u32(dev, "summit,chip-temperature-threshold-celsius",
+ &smb->chip_temp_threshold);
+ device_property_read_u32(dev, "summit,soft-compensation-method",
+ &smb->soft_temp_limit_compensation);
+ device_property_read_u32(dev, "summit,charge-current-compensation-microamp",
+ &smb->charge_current_compensation);
+
+ /* Supported charging mode */
+ smb->use_mains = device_property_read_bool(dev, "summit,enable-mains-charging");
+ smb->use_usb = device_property_read_bool(dev, "summit,enable-usb-charging");
+ smb->use_usb_otg = device_property_read_bool(dev, "summit,enable-otg-charging");
+
+ /* Select charging control */
+ device_property_read_u32(dev, "summit,enable-charge-control",
+ &smb->enable_control);
+}
+
+static int smb347_get_battery_info(struct smb347_charger *smb)
+{
+ struct power_supply_battery_info info = {};
+ struct power_supply *supply;
+ int err;
+
+ if (smb->mains)
+ supply = smb->mains;
+ else
+ supply = smb->usb;
+
+ err = power_supply_get_battery_info(supply, &info);
+ if (err == -ENXIO || err == -ENODEV)
+ return 0;
+ if (err)
+ return err;
+
+ if (info.constant_charge_current_max_ua != -EINVAL)
+ smb->max_charge_current = info.constant_charge_current_max_ua;
+
+ if (info.constant_charge_voltage_max_uv != -EINVAL)
+ smb->max_charge_voltage = info.constant_charge_voltage_max_uv;
+
+ if (info.precharge_current_ua != -EINVAL)
+ smb->pre_charge_current = info.precharge_current_ua;
+
+ if (info.charge_term_current_ua != -EINVAL)
+ smb->termination_current = info.charge_term_current_ua;
+
+ if (info.temp_alert_min != INT_MIN)
+ smb->soft_cold_temp_limit = info.temp_alert_min;
+
+ if (info.temp_alert_max != INT_MAX)
+ smb->soft_hot_temp_limit = info.temp_alert_max;
+
+ if (info.temp_min != INT_MIN)
+ smb->hard_cold_temp_limit = info.temp_min;
+
+ if (info.temp_max != INT_MAX)
+ smb->hard_hot_temp_limit = info.temp_max;
+
+ /* Suspend when battery temperature is outside hard limits */
+ if (smb->hard_cold_temp_limit != SMB3XX_TEMP_USE_DEFAULT ||
+ smb->hard_hot_temp_limit != SMB3XX_TEMP_USE_DEFAULT)
+ smb->suspend_on_hard_temp_limit = true;
+
+ return 0;
+}
+
+static const struct regmap_config smb347_regmap = {
+ .reg_bits = 8,
+ .val_bits = 8,
+ .max_register = SMB347_MAX_REGISTER,
+ .volatile_reg = smb347_volatile_reg,
+ .readable_reg = smb347_readable_reg,
+};
+
+static const struct power_supply_desc smb347_mains_desc = {
+ .name = "smb347-mains",
+ .type = POWER_SUPPLY_TYPE_MAINS,
+ .get_property = smb347_get_property,
+ .properties = smb347_properties,
+ .num_properties = ARRAY_SIZE(smb347_properties),
+};
+
+static const struct power_supply_desc smb347_usb_desc = {
+ .name = "smb347-usb",
+ .type = POWER_SUPPLY_TYPE_USB,
+ .get_property = smb347_get_property,
+ .properties = smb347_properties,
+ .num_properties = ARRAY_SIZE(smb347_properties),
+};
+
+static int smb347_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct power_supply_config mains_usb_cfg = {};
+ struct device *dev = &client->dev;
+ struct smb347_charger *smb;
+ int ret;
+
+ smb = devm_kzalloc(dev, sizeof(*smb), GFP_KERNEL);
+ if (!smb)
+ return -ENOMEM;
+ smb->dev = &client->dev;
+ smb->id = id->driver_data;
+ i2c_set_clientdata(client, smb);
+
+ smb347_dt_parse_dev_info(smb);
+ if (!smb->use_mains && !smb->use_usb)
+ return -EINVAL;
+
+ smb->regmap = devm_regmap_init_i2c(client, &smb347_regmap);
+ if (IS_ERR(smb->regmap))
+ return PTR_ERR(smb->regmap);
+
+ mains_usb_cfg.drv_data = smb;
+ mains_usb_cfg.of_node = dev->of_node;
+ if (smb->use_mains) {
+ smb->mains = devm_power_supply_register(dev, &smb347_mains_desc,
+ &mains_usb_cfg);
+ if (IS_ERR(smb->mains))
+ return PTR_ERR(smb->mains);
+ }
+
+ if (smb->use_usb) {
+ smb->usb = devm_power_supply_register(dev, &smb347_usb_desc,
+ &mains_usb_cfg);
+ if (IS_ERR(smb->usb))
+ return PTR_ERR(smb->usb);
+ }
+
+ ret = smb347_get_battery_info(smb);
+ if (ret)
+ return ret;
+
+ ret = smb347_hw_init(smb);
+ if (ret < 0)
+ return ret;
+
+ /*
+ * Interrupt pin is optional. If it is connected, we setup the
+ * interrupt support here.
+ */
+ if (client->irq) {
+ ret = smb347_irq_init(smb, client);
+ if (ret < 0) {
+ dev_warn(dev, "failed to initialize IRQ: %d\n", ret);
+ dev_warn(dev, "disabling IRQ support\n");
+ smb->irq_unsupported = true;
+ } else {
+ smb347_irq_enable(smb);
+ }
+ }
+
+ return 0;
+}
+
+static int smb347_remove(struct i2c_client *client)
+{
+ struct smb347_charger *smb = i2c_get_clientdata(client);
+
+ smb347_irq_disable(smb);
+
+ return 0;
+}
+
+static const struct i2c_device_id smb347_id[] = {
+ { "smb345", SMB345 },
+ { "smb347", SMB347 },
+ { "smb358", SMB358 },
+ { },
+};
+MODULE_DEVICE_TABLE(i2c, smb347_id);
+
+static const struct of_device_id smb3xx_of_match[] = {
+ { .compatible = "summit,smb345" },
+ { .compatible = "summit,smb347" },
+ { .compatible = "summit,smb358" },
+ { },
+};
+MODULE_DEVICE_TABLE(of, smb3xx_of_match);
+
+static struct i2c_driver smb347_driver = {
+ .driver = {
+ .name = "smb347",
+ .of_match_table = smb3xx_of_match,
+ },
+ .probe = smb347_probe,
+ .remove = smb347_remove,
+ .id_table = smb347_id,
+};
+
+module_i2c_driver(smb347_driver);
+
+MODULE_AUTHOR("Bruce E. Robertson <bruce.e.robertson@intel.com>");
+MODULE_AUTHOR("Mika Westerberg <mika.westerberg@linux.intel.com>");
+MODULE_DESCRIPTION("SMB347 battery charger driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/power/supply/test_power.c b/drivers/power/supply/test_power.c
new file mode 100644
index 000000000..5f510ddc9
--- /dev/null
+++ b/drivers/power/supply/test_power.c
@@ -0,0 +1,591 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Power supply driver for testing.
+ *
+ * Copyright 2010 Anton Vorontsov <cbouatmailru@gmail.com>
+ *
+ * Dynamic module parameter code from the Virtual Battery Driver
+ * Copyright (C) 2008 Pylone, Inc.
+ * By: Masashi YOKOTA <yokota@pylone.jp>
+ * Originally found here:
+ * http://downloads.pylone.jp/src/virtual_battery/virtual_battery-0.0.1.tar.bz2
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/power_supply.h>
+#include <linux/errno.h>
+#include <linux/delay.h>
+#include <generated/utsrelease.h>
+
+enum test_power_id {
+ TEST_AC,
+ TEST_BATTERY,
+ TEST_USB,
+ TEST_POWER_NUM,
+};
+
+static int ac_online = 1;
+static int usb_online = 1;
+static int battery_status = POWER_SUPPLY_STATUS_DISCHARGING;
+static int battery_health = POWER_SUPPLY_HEALTH_GOOD;
+static int battery_present = 1; /* true */
+static int battery_technology = POWER_SUPPLY_TECHNOLOGY_LION;
+static int battery_capacity = 50;
+static int battery_voltage = 3300;
+static int battery_charge_counter = -1000;
+static int battery_current = -1600;
+
+static bool module_initialized;
+
+static int test_power_get_ac_property(struct power_supply *psy,
+ enum power_supply_property psp,
+ union power_supply_propval *val)
+{
+ switch (psp) {
+ case POWER_SUPPLY_PROP_ONLINE:
+ val->intval = ac_online;
+ break;
+ default:
+ return -EINVAL;
+ }
+ return 0;
+}
+
+static int test_power_get_usb_property(struct power_supply *psy,
+ enum power_supply_property psp,
+ union power_supply_propval *val)
+{
+ switch (psp) {
+ case POWER_SUPPLY_PROP_ONLINE:
+ val->intval = usb_online;
+ break;
+ default:
+ return -EINVAL;
+ }
+ return 0;
+}
+
+static int test_power_get_battery_property(struct power_supply *psy,
+ enum power_supply_property psp,
+ union power_supply_propval *val)
+{
+ switch (psp) {
+ case POWER_SUPPLY_PROP_MODEL_NAME:
+ val->strval = "Test battery";
+ break;
+ case POWER_SUPPLY_PROP_MANUFACTURER:
+ val->strval = "Linux";
+ break;
+ case POWER_SUPPLY_PROP_SERIAL_NUMBER:
+ val->strval = UTS_RELEASE;
+ break;
+ case POWER_SUPPLY_PROP_STATUS:
+ val->intval = battery_status;
+ break;
+ case POWER_SUPPLY_PROP_CHARGE_TYPE:
+ val->intval = POWER_SUPPLY_CHARGE_TYPE_FAST;
+ break;
+ case POWER_SUPPLY_PROP_HEALTH:
+ val->intval = battery_health;
+ break;
+ case POWER_SUPPLY_PROP_PRESENT:
+ val->intval = battery_present;
+ break;
+ case POWER_SUPPLY_PROP_TECHNOLOGY:
+ val->intval = battery_technology;
+ break;
+ case POWER_SUPPLY_PROP_CAPACITY_LEVEL:
+ val->intval = POWER_SUPPLY_CAPACITY_LEVEL_NORMAL;
+ break;
+ case POWER_SUPPLY_PROP_CAPACITY:
+ case POWER_SUPPLY_PROP_CHARGE_NOW:
+ val->intval = battery_capacity;
+ break;
+ case POWER_SUPPLY_PROP_CHARGE_COUNTER:
+ val->intval = battery_charge_counter;
+ break;
+ case POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN:
+ case POWER_SUPPLY_PROP_CHARGE_FULL:
+ val->intval = 100;
+ break;
+ case POWER_SUPPLY_PROP_TIME_TO_EMPTY_AVG:
+ case POWER_SUPPLY_PROP_TIME_TO_FULL_NOW:
+ val->intval = 3600;
+ break;
+ case POWER_SUPPLY_PROP_TEMP:
+ val->intval = 26;
+ break;
+ case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+ val->intval = battery_voltage;
+ break;
+ case POWER_SUPPLY_PROP_CURRENT_AVG:
+ case POWER_SUPPLY_PROP_CURRENT_NOW:
+ val->intval = battery_current;
+ break;
+ default:
+ pr_info("%s: some properties deliberately report errors.\n",
+ __func__);
+ return -EINVAL;
+ }
+ return 0;
+}
+
+static enum power_supply_property test_power_ac_props[] = {
+ POWER_SUPPLY_PROP_ONLINE,
+};
+
+static enum power_supply_property test_power_battery_props[] = {
+ POWER_SUPPLY_PROP_STATUS,
+ POWER_SUPPLY_PROP_CHARGE_TYPE,
+ POWER_SUPPLY_PROP_HEALTH,
+ POWER_SUPPLY_PROP_PRESENT,
+ POWER_SUPPLY_PROP_TECHNOLOGY,
+ POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN,
+ POWER_SUPPLY_PROP_CHARGE_FULL,
+ POWER_SUPPLY_PROP_CHARGE_NOW,
+ POWER_SUPPLY_PROP_CHARGE_COUNTER,
+ POWER_SUPPLY_PROP_CAPACITY,
+ POWER_SUPPLY_PROP_CAPACITY_LEVEL,
+ POWER_SUPPLY_PROP_TIME_TO_EMPTY_AVG,
+ POWER_SUPPLY_PROP_TIME_TO_FULL_NOW,
+ POWER_SUPPLY_PROP_MODEL_NAME,
+ POWER_SUPPLY_PROP_MANUFACTURER,
+ POWER_SUPPLY_PROP_SERIAL_NUMBER,
+ POWER_SUPPLY_PROP_TEMP,
+ POWER_SUPPLY_PROP_VOLTAGE_NOW,
+ POWER_SUPPLY_PROP_CURRENT_AVG,
+ POWER_SUPPLY_PROP_CURRENT_NOW,
+};
+
+static char *test_power_ac_supplied_to[] = {
+ "test_battery",
+};
+
+static struct power_supply *test_power_supplies[TEST_POWER_NUM];
+
+static const struct power_supply_desc test_power_desc[] = {
+ [TEST_AC] = {
+ .name = "test_ac",
+ .type = POWER_SUPPLY_TYPE_MAINS,
+ .properties = test_power_ac_props,
+ .num_properties = ARRAY_SIZE(test_power_ac_props),
+ .get_property = test_power_get_ac_property,
+ },
+ [TEST_BATTERY] = {
+ .name = "test_battery",
+ .type = POWER_SUPPLY_TYPE_BATTERY,
+ .properties = test_power_battery_props,
+ .num_properties = ARRAY_SIZE(test_power_battery_props),
+ .get_property = test_power_get_battery_property,
+ },
+ [TEST_USB] = {
+ .name = "test_usb",
+ .type = POWER_SUPPLY_TYPE_USB,
+ .properties = test_power_ac_props,
+ .num_properties = ARRAY_SIZE(test_power_ac_props),
+ .get_property = test_power_get_usb_property,
+ },
+};
+
+static const struct power_supply_config test_power_configs[] = {
+ {
+ /* test_ac */
+ .supplied_to = test_power_ac_supplied_to,
+ .num_supplicants = ARRAY_SIZE(test_power_ac_supplied_to),
+ }, {
+ /* test_battery */
+ }, {
+ /* test_usb */
+ .supplied_to = test_power_ac_supplied_to,
+ .num_supplicants = ARRAY_SIZE(test_power_ac_supplied_to),
+ },
+};
+
+static int __init test_power_init(void)
+{
+ int i;
+ int ret;
+
+ BUILD_BUG_ON(TEST_POWER_NUM != ARRAY_SIZE(test_power_supplies));
+ BUILD_BUG_ON(TEST_POWER_NUM != ARRAY_SIZE(test_power_configs));
+
+ for (i = 0; i < ARRAY_SIZE(test_power_supplies); i++) {
+ test_power_supplies[i] = power_supply_register(NULL,
+ &test_power_desc[i],
+ &test_power_configs[i]);
+ if (IS_ERR(test_power_supplies[i])) {
+ pr_err("%s: failed to register %s\n", __func__,
+ test_power_desc[i].name);
+ ret = PTR_ERR(test_power_supplies[i]);
+ goto failed;
+ }
+ }
+
+ module_initialized = true;
+ return 0;
+failed:
+ while (--i >= 0)
+ power_supply_unregister(test_power_supplies[i]);
+ return ret;
+}
+module_init(test_power_init);
+
+static void __exit test_power_exit(void)
+{
+ int i;
+
+ /* Let's see how we handle changes... */
+ ac_online = 0;
+ usb_online = 0;
+ battery_status = POWER_SUPPLY_STATUS_DISCHARGING;
+ for (i = 0; i < ARRAY_SIZE(test_power_supplies); i++)
+ power_supply_changed(test_power_supplies[i]);
+ pr_info("%s: 'changed' event sent, sleeping for 10 seconds...\n",
+ __func__);
+ ssleep(10);
+
+ for (i = 0; i < ARRAY_SIZE(test_power_supplies); i++)
+ power_supply_unregister(test_power_supplies[i]);
+
+ module_initialized = false;
+}
+module_exit(test_power_exit);
+
+
+
+#define MAX_KEYLENGTH 256
+struct battery_property_map {
+ int value;
+ char const *key;
+};
+
+static struct battery_property_map map_ac_online[] = {
+ { 0, "off" },
+ { 1, "on" },
+ { -1, NULL },
+};
+
+static struct battery_property_map map_status[] = {
+ { POWER_SUPPLY_STATUS_CHARGING, "charging" },
+ { POWER_SUPPLY_STATUS_DISCHARGING, "discharging" },
+ { POWER_SUPPLY_STATUS_NOT_CHARGING, "not-charging" },
+ { POWER_SUPPLY_STATUS_FULL, "full" },
+ { -1, NULL },
+};
+
+static struct battery_property_map map_health[] = {
+ { POWER_SUPPLY_HEALTH_GOOD, "good" },
+ { POWER_SUPPLY_HEALTH_OVERHEAT, "overheat" },
+ { POWER_SUPPLY_HEALTH_DEAD, "dead" },
+ { POWER_SUPPLY_HEALTH_OVERVOLTAGE, "overvoltage" },
+ { POWER_SUPPLY_HEALTH_UNSPEC_FAILURE, "failure" },
+ { -1, NULL },
+};
+
+static struct battery_property_map map_present[] = {
+ { 0, "false" },
+ { 1, "true" },
+ { -1, NULL },
+};
+
+static struct battery_property_map map_technology[] = {
+ { POWER_SUPPLY_TECHNOLOGY_NiMH, "NiMH" },
+ { POWER_SUPPLY_TECHNOLOGY_LION, "LION" },
+ { POWER_SUPPLY_TECHNOLOGY_LIPO, "LIPO" },
+ { POWER_SUPPLY_TECHNOLOGY_LiFe, "LiFe" },
+ { POWER_SUPPLY_TECHNOLOGY_NiCd, "NiCd" },
+ { POWER_SUPPLY_TECHNOLOGY_LiMn, "LiMn" },
+ { -1, NULL },
+};
+
+
+static int map_get_value(struct battery_property_map *map, const char *key,
+ int def_val)
+{
+ char buf[MAX_KEYLENGTH];
+ int cr;
+
+ strncpy(buf, key, MAX_KEYLENGTH);
+ buf[MAX_KEYLENGTH-1] = '\0';
+
+ cr = strnlen(buf, MAX_KEYLENGTH) - 1;
+ if (cr < 0)
+ return def_val;
+ if (buf[cr] == '\n')
+ buf[cr] = '\0';
+
+ while (map->key) {
+ if (strncasecmp(map->key, buf, MAX_KEYLENGTH) == 0)
+ return map->value;
+ map++;
+ }
+
+ return def_val;
+}
+
+
+static const char *map_get_key(struct battery_property_map *map, int value,
+ const char *def_key)
+{
+ while (map->key) {
+ if (map->value == value)
+ return map->key;
+ map++;
+ }
+
+ return def_key;
+}
+
+static inline void signal_power_supply_changed(struct power_supply *psy)
+{
+ if (module_initialized)
+ power_supply_changed(psy);
+}
+
+static int param_set_ac_online(const char *key, const struct kernel_param *kp)
+{
+ ac_online = map_get_value(map_ac_online, key, ac_online);
+ signal_power_supply_changed(test_power_supplies[TEST_AC]);
+ return 0;
+}
+
+static int param_get_ac_online(char *buffer, const struct kernel_param *kp)
+{
+ return sprintf(buffer, "%s\n",
+ map_get_key(map_ac_online, ac_online, "unknown"));
+}
+
+static int param_set_usb_online(const char *key, const struct kernel_param *kp)
+{
+ usb_online = map_get_value(map_ac_online, key, usb_online);
+ signal_power_supply_changed(test_power_supplies[TEST_USB]);
+ return 0;
+}
+
+static int param_get_usb_online(char *buffer, const struct kernel_param *kp)
+{
+ return sprintf(buffer, "%s\n",
+ map_get_key(map_ac_online, usb_online, "unknown"));
+}
+
+static int param_set_battery_status(const char *key,
+ const struct kernel_param *kp)
+{
+ battery_status = map_get_value(map_status, key, battery_status);
+ signal_power_supply_changed(test_power_supplies[TEST_BATTERY]);
+ return 0;
+}
+
+static int param_get_battery_status(char *buffer, const struct kernel_param *kp)
+{
+ return sprintf(buffer, "%s\n",
+ map_get_key(map_ac_online, battery_status, "unknown"));
+}
+
+static int param_set_battery_health(const char *key,
+ const struct kernel_param *kp)
+{
+ battery_health = map_get_value(map_health, key, battery_health);
+ signal_power_supply_changed(test_power_supplies[TEST_BATTERY]);
+ return 0;
+}
+
+static int param_get_battery_health(char *buffer, const struct kernel_param *kp)
+{
+ return sprintf(buffer, "%s\n",
+ map_get_key(map_ac_online, battery_health, "unknown"));
+}
+
+static int param_set_battery_present(const char *key,
+ const struct kernel_param *kp)
+{
+ battery_present = map_get_value(map_present, key, battery_present);
+ signal_power_supply_changed(test_power_supplies[TEST_AC]);
+ return 0;
+}
+
+static int param_get_battery_present(char *buffer,
+ const struct kernel_param *kp)
+{
+ return sprintf(buffer, "%s\n",
+ map_get_key(map_ac_online, battery_present, "unknown"));
+}
+
+static int param_set_battery_technology(const char *key,
+ const struct kernel_param *kp)
+{
+ battery_technology = map_get_value(map_technology, key,
+ battery_technology);
+ signal_power_supply_changed(test_power_supplies[TEST_BATTERY]);
+ return 0;
+}
+
+static int param_get_battery_technology(char *buffer,
+ const struct kernel_param *kp)
+{
+ return sprintf(buffer, "%s\n",
+ map_get_key(map_ac_online, battery_technology,
+ "unknown"));
+}
+
+static int param_set_battery_capacity(const char *key,
+ const struct kernel_param *kp)
+{
+ int tmp;
+
+ if (1 != sscanf(key, "%d", &tmp))
+ return -EINVAL;
+
+ battery_capacity = tmp;
+ signal_power_supply_changed(test_power_supplies[TEST_BATTERY]);
+ return 0;
+}
+
+#define param_get_battery_capacity param_get_int
+
+static int param_set_battery_voltage(const char *key,
+ const struct kernel_param *kp)
+{
+ int tmp;
+
+ if (1 != sscanf(key, "%d", &tmp))
+ return -EINVAL;
+
+ battery_voltage = tmp;
+ signal_power_supply_changed(test_power_supplies[TEST_BATTERY]);
+ return 0;
+}
+
+#define param_get_battery_voltage param_get_int
+
+static int param_set_battery_charge_counter(const char *key,
+ const struct kernel_param *kp)
+{
+ int tmp;
+
+ if (1 != sscanf(key, "%d", &tmp))
+ return -EINVAL;
+
+ battery_charge_counter = tmp;
+ signal_power_supply_changed(test_power_supplies[TEST_BATTERY]);
+ return 0;
+}
+
+#define param_get_battery_charge_counter param_get_int
+
+static int param_set_battery_current(const char *key,
+ const struct kernel_param *kp)
+{
+ int tmp;
+
+ if (1 != sscanf(key, "%d", &tmp))
+ return -EINVAL;
+
+ battery_current = tmp;
+ signal_power_supply_changed(test_power_supplies[TEST_BATTERY]);
+ return 0;
+}
+
+#define param_get_battery_current param_get_int
+
+static const struct kernel_param_ops param_ops_ac_online = {
+ .set = param_set_ac_online,
+ .get = param_get_ac_online,
+};
+
+static const struct kernel_param_ops param_ops_usb_online = {
+ .set = param_set_usb_online,
+ .get = param_get_usb_online,
+};
+
+static const struct kernel_param_ops param_ops_battery_status = {
+ .set = param_set_battery_status,
+ .get = param_get_battery_status,
+};
+
+static const struct kernel_param_ops param_ops_battery_present = {
+ .set = param_set_battery_present,
+ .get = param_get_battery_present,
+};
+
+static const struct kernel_param_ops param_ops_battery_technology = {
+ .set = param_set_battery_technology,
+ .get = param_get_battery_technology,
+};
+
+static const struct kernel_param_ops param_ops_battery_health = {
+ .set = param_set_battery_health,
+ .get = param_get_battery_health,
+};
+
+static const struct kernel_param_ops param_ops_battery_capacity = {
+ .set = param_set_battery_capacity,
+ .get = param_get_battery_capacity,
+};
+
+static const struct kernel_param_ops param_ops_battery_voltage = {
+ .set = param_set_battery_voltage,
+ .get = param_get_battery_voltage,
+};
+
+static const struct kernel_param_ops param_ops_battery_charge_counter = {
+ .set = param_set_battery_charge_counter,
+ .get = param_get_battery_charge_counter,
+};
+
+static const struct kernel_param_ops param_ops_battery_current = {
+ .set = param_set_battery_current,
+ .get = param_get_battery_current,
+};
+
+#define param_check_ac_online(name, p) __param_check(name, p, void);
+#define param_check_usb_online(name, p) __param_check(name, p, void);
+#define param_check_battery_status(name, p) __param_check(name, p, void);
+#define param_check_battery_present(name, p) __param_check(name, p, void);
+#define param_check_battery_technology(name, p) __param_check(name, p, void);
+#define param_check_battery_health(name, p) __param_check(name, p, void);
+#define param_check_battery_capacity(name, p) __param_check(name, p, void);
+#define param_check_battery_voltage(name, p) __param_check(name, p, void);
+#define param_check_battery_charge_counter(name, p) __param_check(name, p, void);
+#define param_check_battery_current(name, p) __param_check(name, p, void);
+
+
+module_param(ac_online, ac_online, 0644);
+MODULE_PARM_DESC(ac_online, "AC charging state <on|off>");
+
+module_param(usb_online, usb_online, 0644);
+MODULE_PARM_DESC(usb_online, "USB charging state <on|off>");
+
+module_param(battery_status, battery_status, 0644);
+MODULE_PARM_DESC(battery_status,
+ "battery status <charging|discharging|not-charging|full>");
+
+module_param(battery_present, battery_present, 0644);
+MODULE_PARM_DESC(battery_present,
+ "battery presence state <good|overheat|dead|overvoltage|failure>");
+
+module_param(battery_technology, battery_technology, 0644);
+MODULE_PARM_DESC(battery_technology,
+ "battery technology <NiMH|LION|LIPO|LiFe|NiCd|LiMn>");
+
+module_param(battery_health, battery_health, 0644);
+MODULE_PARM_DESC(battery_health,
+ "battery health state <good|overheat|dead|overvoltage|failure>");
+
+module_param(battery_capacity, battery_capacity, 0644);
+MODULE_PARM_DESC(battery_capacity, "battery capacity (percentage)");
+
+module_param(battery_voltage, battery_voltage, 0644);
+MODULE_PARM_DESC(battery_voltage, "battery voltage (millivolts)");
+
+module_param(battery_charge_counter, battery_charge_counter, 0644);
+MODULE_PARM_DESC(battery_charge_counter,
+ "battery charge counter (microampere-hours)");
+
+module_param(battery_current, battery_current, 0644);
+MODULE_PARM_DESC(battery_current, "battery current (milliampere)");
+
+MODULE_DESCRIPTION("Power supply driver for testing");
+MODULE_AUTHOR("Anton Vorontsov <cbouatmailru@gmail.com>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/power/supply/tosa_battery.c b/drivers/power/supply/tosa_battery.c
new file mode 100644
index 000000000..32cc31cd4
--- /dev/null
+++ b/drivers/power/supply/tosa_battery.c
@@ -0,0 +1,466 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Battery and Power Management code for the Sharp SL-6000x
+ *
+ * Copyright (c) 2005 Dirk Opfer
+ * Copyright (c) 2008 Dmitry Baryshkov
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/power_supply.h>
+#include <linux/wm97xx.h>
+#include <linux/delay.h>
+#include <linux/spinlock.h>
+#include <linux/interrupt.h>
+#include <linux/gpio.h>
+
+#include <asm/mach-types.h>
+#include <mach/tosa.h>
+
+static DEFINE_MUTEX(bat_lock); /* protects gpio pins */
+static struct work_struct bat_work;
+
+struct tosa_bat {
+ int status;
+ struct power_supply *psy;
+ int full_chrg;
+
+ struct mutex work_lock; /* protects data */
+
+ bool (*is_present)(struct tosa_bat *bat);
+ int gpio_full;
+ int gpio_charge_off;
+
+ int technology;
+
+ int gpio_bat;
+ int adc_bat;
+ int adc_bat_divider;
+ int bat_max;
+ int bat_min;
+
+ int gpio_temp;
+ int adc_temp;
+ int adc_temp_divider;
+};
+
+static struct tosa_bat tosa_bat_main;
+static struct tosa_bat tosa_bat_jacket;
+
+static unsigned long tosa_read_bat(struct tosa_bat *bat)
+{
+ unsigned long value = 0;
+
+ if (bat->gpio_bat < 0 || bat->adc_bat < 0)
+ return 0;
+
+ mutex_lock(&bat_lock);
+ gpio_set_value(bat->gpio_bat, 1);
+ msleep(5);
+ value = wm97xx_read_aux_adc(dev_get_drvdata(bat->psy->dev.parent),
+ bat->adc_bat);
+ gpio_set_value(bat->gpio_bat, 0);
+ mutex_unlock(&bat_lock);
+
+ value = value * 1000000 / bat->adc_bat_divider;
+
+ return value;
+}
+
+static unsigned long tosa_read_temp(struct tosa_bat *bat)
+{
+ unsigned long value = 0;
+
+ if (bat->gpio_temp < 0 || bat->adc_temp < 0)
+ return 0;
+
+ mutex_lock(&bat_lock);
+ gpio_set_value(bat->gpio_temp, 1);
+ msleep(5);
+ value = wm97xx_read_aux_adc(dev_get_drvdata(bat->psy->dev.parent),
+ bat->adc_temp);
+ gpio_set_value(bat->gpio_temp, 0);
+ mutex_unlock(&bat_lock);
+
+ value = value * 10000 / bat->adc_temp_divider;
+
+ return value;
+}
+
+static int tosa_bat_get_property(struct power_supply *psy,
+ enum power_supply_property psp,
+ union power_supply_propval *val)
+{
+ int ret = 0;
+ struct tosa_bat *bat = power_supply_get_drvdata(psy);
+
+ if (bat->is_present && !bat->is_present(bat)
+ && psp != POWER_SUPPLY_PROP_PRESENT) {
+ return -ENODEV;
+ }
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_STATUS:
+ val->intval = bat->status;
+ break;
+ case POWER_SUPPLY_PROP_TECHNOLOGY:
+ val->intval = bat->technology;
+ break;
+ case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+ val->intval = tosa_read_bat(bat);
+ break;
+ case POWER_SUPPLY_PROP_VOLTAGE_MAX:
+ if (bat->full_chrg == -1)
+ val->intval = bat->bat_max;
+ else
+ val->intval = bat->full_chrg;
+ break;
+ case POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN:
+ val->intval = bat->bat_max;
+ break;
+ case POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN:
+ val->intval = bat->bat_min;
+ break;
+ case POWER_SUPPLY_PROP_TEMP:
+ val->intval = tosa_read_temp(bat);
+ break;
+ case POWER_SUPPLY_PROP_PRESENT:
+ val->intval = bat->is_present ? bat->is_present(bat) : 1;
+ break;
+ default:
+ ret = -EINVAL;
+ break;
+ }
+ return ret;
+}
+
+static bool tosa_jacket_bat_is_present(struct tosa_bat *bat)
+{
+ return gpio_get_value(TOSA_GPIO_JACKET_DETECT) == 0;
+}
+
+static void tosa_bat_external_power_changed(struct power_supply *psy)
+{
+ schedule_work(&bat_work);
+}
+
+static irqreturn_t tosa_bat_gpio_isr(int irq, void *data)
+{
+ pr_info("tosa_bat_gpio irq\n");
+ schedule_work(&bat_work);
+ return IRQ_HANDLED;
+}
+
+static void tosa_bat_update(struct tosa_bat *bat)
+{
+ int old;
+ struct power_supply *psy = bat->psy;
+
+ mutex_lock(&bat->work_lock);
+
+ old = bat->status;
+
+ if (bat->is_present && !bat->is_present(bat)) {
+ printk(KERN_NOTICE "%s not present\n", psy->desc->name);
+ bat->status = POWER_SUPPLY_STATUS_UNKNOWN;
+ bat->full_chrg = -1;
+ } else if (power_supply_am_i_supplied(psy)) {
+ if (bat->status == POWER_SUPPLY_STATUS_DISCHARGING) {
+ gpio_set_value(bat->gpio_charge_off, 0);
+ mdelay(15);
+ }
+
+ if (gpio_get_value(bat->gpio_full)) {
+ if (old == POWER_SUPPLY_STATUS_CHARGING ||
+ bat->full_chrg == -1)
+ bat->full_chrg = tosa_read_bat(bat);
+
+ gpio_set_value(bat->gpio_charge_off, 1);
+ bat->status = POWER_SUPPLY_STATUS_FULL;
+ } else {
+ gpio_set_value(bat->gpio_charge_off, 0);
+ bat->status = POWER_SUPPLY_STATUS_CHARGING;
+ }
+ } else {
+ gpio_set_value(bat->gpio_charge_off, 1);
+ bat->status = POWER_SUPPLY_STATUS_DISCHARGING;
+ }
+
+ if (old != bat->status)
+ power_supply_changed(psy);
+
+ mutex_unlock(&bat->work_lock);
+}
+
+static void tosa_bat_work(struct work_struct *work)
+{
+ tosa_bat_update(&tosa_bat_main);
+ tosa_bat_update(&tosa_bat_jacket);
+}
+
+
+static enum power_supply_property tosa_bat_main_props[] = {
+ POWER_SUPPLY_PROP_STATUS,
+ POWER_SUPPLY_PROP_TECHNOLOGY,
+ POWER_SUPPLY_PROP_VOLTAGE_NOW,
+ POWER_SUPPLY_PROP_VOLTAGE_MAX,
+ POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN,
+ POWER_SUPPLY_PROP_TEMP,
+ POWER_SUPPLY_PROP_PRESENT,
+};
+
+static enum power_supply_property tosa_bat_bu_props[] = {
+ POWER_SUPPLY_PROP_STATUS,
+ POWER_SUPPLY_PROP_TECHNOLOGY,
+ POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN,
+ POWER_SUPPLY_PROP_VOLTAGE_NOW,
+ POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN,
+ POWER_SUPPLY_PROP_PRESENT,
+};
+
+static const struct power_supply_desc tosa_bat_main_desc = {
+ .name = "main-battery",
+ .type = POWER_SUPPLY_TYPE_BATTERY,
+ .properties = tosa_bat_main_props,
+ .num_properties = ARRAY_SIZE(tosa_bat_main_props),
+ .get_property = tosa_bat_get_property,
+ .external_power_changed = tosa_bat_external_power_changed,
+ .use_for_apm = 1,
+};
+
+static const struct power_supply_desc tosa_bat_jacket_desc = {
+ .name = "jacket-battery",
+ .type = POWER_SUPPLY_TYPE_BATTERY,
+ .properties = tosa_bat_main_props,
+ .num_properties = ARRAY_SIZE(tosa_bat_main_props),
+ .get_property = tosa_bat_get_property,
+ .external_power_changed = tosa_bat_external_power_changed,
+};
+
+static const struct power_supply_desc tosa_bat_bu_desc = {
+ .name = "backup-battery",
+ .type = POWER_SUPPLY_TYPE_BATTERY,
+ .properties = tosa_bat_bu_props,
+ .num_properties = ARRAY_SIZE(tosa_bat_bu_props),
+ .get_property = tosa_bat_get_property,
+ .external_power_changed = tosa_bat_external_power_changed,
+};
+
+static struct tosa_bat tosa_bat_main = {
+ .status = POWER_SUPPLY_STATUS_DISCHARGING,
+ .full_chrg = -1,
+ .psy = NULL,
+
+ .gpio_full = TOSA_GPIO_BAT0_CRG,
+ .gpio_charge_off = TOSA_GPIO_CHARGE_OFF,
+
+ .technology = POWER_SUPPLY_TECHNOLOGY_LIPO,
+
+ .gpio_bat = TOSA_GPIO_BAT0_V_ON,
+ .adc_bat = WM97XX_AUX_ID3,
+ .adc_bat_divider = 414,
+ .bat_max = 4310000,
+ .bat_min = 1551 * 1000000 / 414,
+
+ .gpio_temp = TOSA_GPIO_BAT1_TH_ON,
+ .adc_temp = WM97XX_AUX_ID2,
+ .adc_temp_divider = 10000,
+};
+
+static struct tosa_bat tosa_bat_jacket = {
+ .status = POWER_SUPPLY_STATUS_DISCHARGING,
+ .full_chrg = -1,
+ .psy = NULL,
+
+ .is_present = tosa_jacket_bat_is_present,
+ .gpio_full = TOSA_GPIO_BAT1_CRG,
+ .gpio_charge_off = TOSA_GPIO_CHARGE_OFF_JC,
+
+ .technology = POWER_SUPPLY_TECHNOLOGY_LIPO,
+
+ .gpio_bat = TOSA_GPIO_BAT1_V_ON,
+ .adc_bat = WM97XX_AUX_ID3,
+ .adc_bat_divider = 414,
+ .bat_max = 4310000,
+ .bat_min = 1551 * 1000000 / 414,
+
+ .gpio_temp = TOSA_GPIO_BAT0_TH_ON,
+ .adc_temp = WM97XX_AUX_ID2,
+ .adc_temp_divider = 10000,
+};
+
+static struct tosa_bat tosa_bat_bu = {
+ .status = POWER_SUPPLY_STATUS_UNKNOWN,
+ .full_chrg = -1,
+ .psy = NULL,
+
+ .gpio_full = -1,
+ .gpio_charge_off = -1,
+
+ .technology = POWER_SUPPLY_TECHNOLOGY_LiMn,
+
+ .gpio_bat = TOSA_GPIO_BU_CHRG_ON,
+ .adc_bat = WM97XX_AUX_ID4,
+ .adc_bat_divider = 1266,
+
+ .gpio_temp = -1,
+ .adc_temp = -1,
+ .adc_temp_divider = -1,
+};
+
+static struct gpio tosa_bat_gpios[] = {
+ { TOSA_GPIO_CHARGE_OFF, GPIOF_OUT_INIT_HIGH, "main charge off" },
+ { TOSA_GPIO_CHARGE_OFF_JC, GPIOF_OUT_INIT_HIGH, "jacket charge off" },
+ { TOSA_GPIO_BAT_SW_ON, GPIOF_OUT_INIT_LOW, "battery switch" },
+ { TOSA_GPIO_BAT0_V_ON, GPIOF_OUT_INIT_LOW, "main battery" },
+ { TOSA_GPIO_BAT1_V_ON, GPIOF_OUT_INIT_LOW, "jacket battery" },
+ { TOSA_GPIO_BAT1_TH_ON, GPIOF_OUT_INIT_LOW, "main battery temp" },
+ { TOSA_GPIO_BAT0_TH_ON, GPIOF_OUT_INIT_LOW, "jacket battery temp" },
+ { TOSA_GPIO_BU_CHRG_ON, GPIOF_OUT_INIT_LOW, "backup battery" },
+ { TOSA_GPIO_BAT0_CRG, GPIOF_IN, "main battery full" },
+ { TOSA_GPIO_BAT1_CRG, GPIOF_IN, "jacket battery full" },
+ { TOSA_GPIO_BAT0_LOW, GPIOF_IN, "main battery low" },
+ { TOSA_GPIO_BAT1_LOW, GPIOF_IN, "jacket battery low" },
+ { TOSA_GPIO_JACKET_DETECT, GPIOF_IN, "jacket detect" },
+};
+
+#ifdef CONFIG_PM
+static int tosa_bat_suspend(struct platform_device *dev, pm_message_t state)
+{
+ /* flush all pending status updates */
+ flush_work(&bat_work);
+ return 0;
+}
+
+static int tosa_bat_resume(struct platform_device *dev)
+{
+ /* things may have changed while we were away */
+ schedule_work(&bat_work);
+ return 0;
+}
+#else
+#define tosa_bat_suspend NULL
+#define tosa_bat_resume NULL
+#endif
+
+static int tosa_bat_probe(struct platform_device *dev)
+{
+ int ret;
+ struct power_supply_config main_psy_cfg = {},
+ jacket_psy_cfg = {},
+ bu_psy_cfg = {};
+
+ if (!machine_is_tosa())
+ return -ENODEV;
+
+ ret = gpio_request_array(tosa_bat_gpios, ARRAY_SIZE(tosa_bat_gpios));
+ if (ret)
+ return ret;
+
+ mutex_init(&tosa_bat_main.work_lock);
+ mutex_init(&tosa_bat_jacket.work_lock);
+
+ INIT_WORK(&bat_work, tosa_bat_work);
+
+ main_psy_cfg.drv_data = &tosa_bat_main;
+ tosa_bat_main.psy = power_supply_register(&dev->dev,
+ &tosa_bat_main_desc,
+ &main_psy_cfg);
+ if (IS_ERR(tosa_bat_main.psy)) {
+ ret = PTR_ERR(tosa_bat_main.psy);
+ goto err_psy_reg_main;
+ }
+
+ jacket_psy_cfg.drv_data = &tosa_bat_jacket;
+ tosa_bat_jacket.psy = power_supply_register(&dev->dev,
+ &tosa_bat_jacket_desc,
+ &jacket_psy_cfg);
+ if (IS_ERR(tosa_bat_jacket.psy)) {
+ ret = PTR_ERR(tosa_bat_jacket.psy);
+ goto err_psy_reg_jacket;
+ }
+
+ bu_psy_cfg.drv_data = &tosa_bat_bu;
+ tosa_bat_bu.psy = power_supply_register(&dev->dev, &tosa_bat_bu_desc,
+ &bu_psy_cfg);
+ if (IS_ERR(tosa_bat_bu.psy)) {
+ ret = PTR_ERR(tosa_bat_bu.psy);
+ goto err_psy_reg_bu;
+ }
+
+ ret = request_irq(gpio_to_irq(TOSA_GPIO_BAT0_CRG),
+ tosa_bat_gpio_isr,
+ IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
+ "main full", &tosa_bat_main);
+ if (ret)
+ goto err_req_main;
+
+ ret = request_irq(gpio_to_irq(TOSA_GPIO_BAT1_CRG),
+ tosa_bat_gpio_isr,
+ IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
+ "jacket full", &tosa_bat_jacket);
+ if (ret)
+ goto err_req_jacket;
+
+ ret = request_irq(gpio_to_irq(TOSA_GPIO_JACKET_DETECT),
+ tosa_bat_gpio_isr,
+ IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
+ "jacket detect", &tosa_bat_jacket);
+ if (!ret) {
+ schedule_work(&bat_work);
+ return 0;
+ }
+
+ free_irq(gpio_to_irq(TOSA_GPIO_BAT1_CRG), &tosa_bat_jacket);
+err_req_jacket:
+ free_irq(gpio_to_irq(TOSA_GPIO_BAT0_CRG), &tosa_bat_main);
+err_req_main:
+ power_supply_unregister(tosa_bat_bu.psy);
+err_psy_reg_bu:
+ power_supply_unregister(tosa_bat_jacket.psy);
+err_psy_reg_jacket:
+ power_supply_unregister(tosa_bat_main.psy);
+err_psy_reg_main:
+
+ /* see comment in tosa_bat_remove */
+ cancel_work_sync(&bat_work);
+
+ gpio_free_array(tosa_bat_gpios, ARRAY_SIZE(tosa_bat_gpios));
+ return ret;
+}
+
+static int tosa_bat_remove(struct platform_device *dev)
+{
+ free_irq(gpio_to_irq(TOSA_GPIO_JACKET_DETECT), &tosa_bat_jacket);
+ free_irq(gpio_to_irq(TOSA_GPIO_BAT1_CRG), &tosa_bat_jacket);
+ free_irq(gpio_to_irq(TOSA_GPIO_BAT0_CRG), &tosa_bat_main);
+
+ power_supply_unregister(tosa_bat_bu.psy);
+ power_supply_unregister(tosa_bat_jacket.psy);
+ power_supply_unregister(tosa_bat_main.psy);
+
+ /*
+ * Now cancel the bat_work. We won't get any more schedules,
+ * since all sources (isr and external_power_changed) are
+ * unregistered now.
+ */
+ cancel_work_sync(&bat_work);
+ gpio_free_array(tosa_bat_gpios, ARRAY_SIZE(tosa_bat_gpios));
+ return 0;
+}
+
+static struct platform_driver tosa_bat_driver = {
+ .driver.name = "wm97xx-battery",
+ .driver.owner = THIS_MODULE,
+ .probe = tosa_bat_probe,
+ .remove = tosa_bat_remove,
+ .suspend = tosa_bat_suspend,
+ .resume = tosa_bat_resume,
+};
+
+module_platform_driver(tosa_bat_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Dmitry Baryshkov");
+MODULE_DESCRIPTION("Tosa battery driver");
+MODULE_ALIAS("platform:wm97xx-battery");
diff --git a/drivers/power/supply/tps65090-charger.c b/drivers/power/supply/tps65090-charger.c
new file mode 100644
index 000000000..0990b2fa6
--- /dev/null
+++ b/drivers/power/supply/tps65090-charger.c
@@ -0,0 +1,360 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Battery charger driver for TI's tps65090
+ *
+ * Copyright (c) 2013, NVIDIA CORPORATION. All rights reserved.
+
+ */
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/freezer.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/kthread.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/power_supply.h>
+#include <linux/slab.h>
+
+#include <linux/mfd/tps65090.h>
+
+#define TPS65090_CHARGER_ENABLE BIT(0)
+#define TPS65090_VACG BIT(1)
+#define TPS65090_NOITERM BIT(5)
+
+#define POLL_INTERVAL (HZ * 2) /* Used when no irq */
+
+struct tps65090_charger {
+ struct device *dev;
+ int ac_online;
+ int prev_ac_online;
+ int irq;
+ struct task_struct *poll_task;
+ bool passive_mode;
+ struct power_supply *ac;
+ struct tps65090_platform_data *pdata;
+};
+
+static enum power_supply_property tps65090_ac_props[] = {
+ POWER_SUPPLY_PROP_ONLINE,
+};
+
+static int tps65090_low_chrg_current(struct tps65090_charger *charger)
+{
+ int ret;
+
+ if (charger->passive_mode)
+ return 0;
+
+ ret = tps65090_write(charger->dev->parent, TPS65090_REG_CG_CTRL5,
+ TPS65090_NOITERM);
+ if (ret < 0) {
+ dev_err(charger->dev, "%s(): error reading in register 0x%x\n",
+ __func__, TPS65090_REG_CG_CTRL5);
+ return ret;
+ }
+ return 0;
+}
+
+static int tps65090_enable_charging(struct tps65090_charger *charger)
+{
+ int ret;
+ uint8_t ctrl0 = 0;
+
+ if (charger->passive_mode)
+ return 0;
+
+ ret = tps65090_read(charger->dev->parent, TPS65090_REG_CG_CTRL0,
+ &ctrl0);
+ if (ret < 0) {
+ dev_err(charger->dev, "%s(): error reading in register 0x%x\n",
+ __func__, TPS65090_REG_CG_CTRL0);
+ return ret;
+ }
+
+ ret = tps65090_write(charger->dev->parent, TPS65090_REG_CG_CTRL0,
+ (ctrl0 | TPS65090_CHARGER_ENABLE));
+ if (ret < 0) {
+ dev_err(charger->dev, "%s(): error writing in register 0x%x\n",
+ __func__, TPS65090_REG_CG_CTRL0);
+ return ret;
+ }
+ return 0;
+}
+
+static int tps65090_config_charger(struct tps65090_charger *charger)
+{
+ uint8_t intrmask = 0;
+ int ret;
+
+ if (charger->passive_mode)
+ return 0;
+
+ if (charger->pdata->enable_low_current_chrg) {
+ ret = tps65090_low_chrg_current(charger);
+ if (ret < 0) {
+ dev_err(charger->dev,
+ "error configuring low charge current\n");
+ return ret;
+ }
+ }
+
+ /* Enable the VACG interrupt for AC power detect */
+ ret = tps65090_read(charger->dev->parent, TPS65090_REG_INTR_MASK,
+ &intrmask);
+ if (ret < 0) {
+ dev_err(charger->dev, "%s(): error reading in register 0x%x\n",
+ __func__, TPS65090_REG_INTR_MASK);
+ return ret;
+ }
+
+ ret = tps65090_write(charger->dev->parent, TPS65090_REG_INTR_MASK,
+ (intrmask | TPS65090_VACG));
+ if (ret < 0) {
+ dev_err(charger->dev, "%s(): error writing in register 0x%x\n",
+ __func__, TPS65090_REG_CG_CTRL0);
+ return ret;
+ }
+
+ return 0;
+}
+
+static int tps65090_ac_get_property(struct power_supply *psy,
+ enum power_supply_property psp,
+ union power_supply_propval *val)
+{
+ struct tps65090_charger *charger = power_supply_get_drvdata(psy);
+
+ if (psp == POWER_SUPPLY_PROP_ONLINE) {
+ val->intval = charger->ac_online;
+ charger->prev_ac_online = charger->ac_online;
+ return 0;
+ }
+ return -EINVAL;
+}
+
+static irqreturn_t tps65090_charger_isr(int irq, void *dev_id)
+{
+ struct tps65090_charger *charger = dev_id;
+ int ret;
+ uint8_t status1 = 0;
+ uint8_t intrsts = 0;
+
+ ret = tps65090_read(charger->dev->parent, TPS65090_REG_CG_STATUS1,
+ &status1);
+ if (ret < 0) {
+ dev_err(charger->dev, "%s(): Error in reading reg 0x%x\n",
+ __func__, TPS65090_REG_CG_STATUS1);
+ return IRQ_HANDLED;
+ }
+ msleep(75);
+ ret = tps65090_read(charger->dev->parent, TPS65090_REG_INTR_STS,
+ &intrsts);
+ if (ret < 0) {
+ dev_err(charger->dev, "%s(): Error in reading reg 0x%x\n",
+ __func__, TPS65090_REG_INTR_STS);
+ return IRQ_HANDLED;
+ }
+
+ if (intrsts & TPS65090_VACG) {
+ ret = tps65090_enable_charging(charger);
+ if (ret < 0)
+ return IRQ_HANDLED;
+ charger->ac_online = 1;
+ } else {
+ charger->ac_online = 0;
+ }
+
+ /* Clear interrupts. */
+ if (!charger->passive_mode) {
+ ret = tps65090_write(charger->dev->parent,
+ TPS65090_REG_INTR_STS, 0x00);
+ if (ret < 0) {
+ dev_err(charger->dev,
+ "%s(): Error in writing reg 0x%x\n",
+ __func__, TPS65090_REG_INTR_STS);
+ }
+ }
+
+ if (charger->prev_ac_online != charger->ac_online)
+ power_supply_changed(charger->ac);
+
+ return IRQ_HANDLED;
+}
+
+static struct tps65090_platform_data *
+ tps65090_parse_dt_charger_data(struct platform_device *pdev)
+{
+ struct tps65090_platform_data *pdata;
+ struct device_node *np = pdev->dev.of_node;
+ unsigned int prop;
+
+ pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
+ if (!pdata) {
+ dev_err(&pdev->dev, "Memory alloc for tps65090_pdata failed\n");
+ return NULL;
+ }
+
+ prop = of_property_read_bool(np, "ti,enable-low-current-chrg");
+ pdata->enable_low_current_chrg = prop;
+
+ pdata->irq_base = -1;
+
+ return pdata;
+
+}
+
+static int tps65090_charger_poll_task(void *data)
+{
+ set_freezable();
+
+ while (!kthread_should_stop()) {
+ schedule_timeout_interruptible(POLL_INTERVAL);
+ try_to_freeze();
+ tps65090_charger_isr(-1, data);
+ }
+ return 0;
+}
+
+static const struct power_supply_desc tps65090_charger_desc = {
+ .name = "tps65090-ac",
+ .type = POWER_SUPPLY_TYPE_MAINS,
+ .get_property = tps65090_ac_get_property,
+ .properties = tps65090_ac_props,
+ .num_properties = ARRAY_SIZE(tps65090_ac_props),
+};
+
+static int tps65090_charger_probe(struct platform_device *pdev)
+{
+ struct tps65090_charger *cdata;
+ struct tps65090_platform_data *pdata;
+ struct power_supply_config psy_cfg = {};
+ uint8_t status1 = 0;
+ int ret;
+ int irq;
+
+ pdata = dev_get_platdata(pdev->dev.parent);
+
+ if (IS_ENABLED(CONFIG_OF) && !pdata && pdev->dev.of_node)
+ pdata = tps65090_parse_dt_charger_data(pdev);
+
+ if (!pdata) {
+ dev_err(&pdev->dev, "%s():no platform data available\n",
+ __func__);
+ return -ENODEV;
+ }
+
+ cdata = devm_kzalloc(&pdev->dev, sizeof(*cdata), GFP_KERNEL);
+ if (!cdata) {
+ dev_err(&pdev->dev, "failed to allocate memory status\n");
+ return -ENOMEM;
+ }
+
+ platform_set_drvdata(pdev, cdata);
+
+ cdata->dev = &pdev->dev;
+ cdata->pdata = pdata;
+
+ psy_cfg.supplied_to = pdata->supplied_to;
+ psy_cfg.num_supplicants = pdata->num_supplicants;
+ psy_cfg.of_node = pdev->dev.of_node;
+ psy_cfg.drv_data = cdata;
+
+ cdata->ac = power_supply_register(&pdev->dev, &tps65090_charger_desc,
+ &psy_cfg);
+ if (IS_ERR(cdata->ac)) {
+ dev_err(&pdev->dev, "failed: power supply register\n");
+ return PTR_ERR(cdata->ac);
+ }
+
+ irq = platform_get_irq(pdev, 0);
+ if (irq < 0)
+ irq = -ENXIO;
+ cdata->irq = irq;
+
+ ret = tps65090_config_charger(cdata);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "charger config failed, err %d\n", ret);
+ goto fail_unregister_supply;
+ }
+
+ /* Check for charger presence */
+ ret = tps65090_read(cdata->dev->parent, TPS65090_REG_CG_STATUS1,
+ &status1);
+ if (ret < 0) {
+ dev_err(cdata->dev, "%s(): Error in reading reg 0x%x", __func__,
+ TPS65090_REG_CG_STATUS1);
+ goto fail_unregister_supply;
+ }
+
+ if (status1 != 0) {
+ ret = tps65090_enable_charging(cdata);
+ if (ret < 0) {
+ dev_err(cdata->dev, "error enabling charger\n");
+ goto fail_unregister_supply;
+ }
+ cdata->ac_online = 1;
+ power_supply_changed(cdata->ac);
+ }
+
+ if (irq != -ENXIO) {
+ ret = devm_request_threaded_irq(&pdev->dev, irq, NULL,
+ tps65090_charger_isr, IRQF_ONESHOT, "tps65090-charger", cdata);
+ if (ret) {
+ dev_err(cdata->dev,
+ "Unable to register irq %d err %d\n", irq,
+ ret);
+ goto fail_unregister_supply;
+ }
+ } else {
+ cdata->poll_task = kthread_run(tps65090_charger_poll_task,
+ cdata, "ktps65090charger");
+ cdata->passive_mode = true;
+ if (IS_ERR(cdata->poll_task)) {
+ ret = PTR_ERR(cdata->poll_task);
+ dev_err(cdata->dev,
+ "Unable to run kthread err %d\n", ret);
+ goto fail_unregister_supply;
+ }
+ }
+
+ return 0;
+
+fail_unregister_supply:
+ power_supply_unregister(cdata->ac);
+
+ return ret;
+}
+
+static int tps65090_charger_remove(struct platform_device *pdev)
+{
+ struct tps65090_charger *cdata = platform_get_drvdata(pdev);
+
+ if (cdata->irq == -ENXIO)
+ kthread_stop(cdata->poll_task);
+ power_supply_unregister(cdata->ac);
+
+ return 0;
+}
+
+static const struct of_device_id of_tps65090_charger_match[] = {
+ { .compatible = "ti,tps65090-charger", },
+ { /* end */ }
+};
+MODULE_DEVICE_TABLE(of, of_tps65090_charger_match);
+
+static struct platform_driver tps65090_charger_driver = {
+ .driver = {
+ .name = "tps65090-charger",
+ .of_match_table = of_tps65090_charger_match,
+ },
+ .probe = tps65090_charger_probe,
+ .remove = tps65090_charger_remove,
+};
+module_platform_driver(tps65090_charger_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Syed Rafiuddin <srafiuddin@nvidia.com>");
+MODULE_DESCRIPTION("tps65090 battery charger driver");
diff --git a/drivers/power/supply/tps65217_charger.c b/drivers/power/supply/tps65217_charger.c
new file mode 100644
index 000000000..ba33d1617
--- /dev/null
+++ b/drivers/power/supply/tps65217_charger.c
@@ -0,0 +1,286 @@
+// SPDX-License-Identifier: GPL-2.0
+// Battery charger driver for TI's tps65217
+//
+// Copyright (C) 2015 Collabora Ltd.
+// Author: Enric Balletbo i Serra <enric.balletbo@collabora.com>
+
+/*
+ * Battery charger driver for TI's tps65217
+ */
+#include <linux/kernel.h>
+#include <linux/kthread.h>
+#include <linux/device.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/slab.h>
+#include <linux/err.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/power_supply.h>
+
+#include <linux/mfd/core.h>
+#include <linux/mfd/tps65217.h>
+
+#define CHARGER_STATUS_PRESENT (TPS65217_STATUS_ACPWR | TPS65217_STATUS_USBPWR)
+#define NUM_CHARGER_IRQS 2
+#define POLL_INTERVAL (HZ * 2)
+
+struct tps65217_charger {
+ struct tps65217 *tps;
+ struct device *dev;
+ struct power_supply *psy;
+
+ int online;
+ int prev_online;
+
+ struct task_struct *poll_task;
+};
+
+static enum power_supply_property tps65217_charger_props[] = {
+ POWER_SUPPLY_PROP_ONLINE,
+};
+
+static int tps65217_config_charger(struct tps65217_charger *charger)
+{
+ int ret;
+
+ /*
+ * tps65217 rev. G, p. 31 (see p. 32 for NTC schematic)
+ *
+ * The device can be configured to support a 100k NTC (B = 3960) by
+ * setting the the NTC_TYPE bit in register CHGCONFIG1 to 1. However it
+ * is not recommended to do so. In sleep mode, the charger continues
+ * charging the battery, but all register values are reset to default
+ * values. Therefore, the charger would get the wrong temperature
+ * information. If 100k NTC setting is required, please contact the
+ * factory.
+ *
+ * ATTENTION, conflicting information, from p. 46
+ *
+ * NTC TYPE (for battery temperature measurement)
+ * 0 – 100k (curve 1, B = 3960)
+ * 1 – 10k (curve 2, B = 3480) (default on reset)
+ *
+ */
+ ret = tps65217_clear_bits(charger->tps, TPS65217_REG_CHGCONFIG1,
+ TPS65217_CHGCONFIG1_NTC_TYPE,
+ TPS65217_PROTECT_NONE);
+ if (ret) {
+ dev_err(charger->dev,
+ "failed to set 100k NTC setting: %d\n", ret);
+ return ret;
+ }
+
+ return 0;
+}
+
+static int tps65217_enable_charging(struct tps65217_charger *charger)
+{
+ int ret;
+
+ /* charger already enabled */
+ if (charger->online)
+ return 0;
+
+ dev_dbg(charger->dev, "%s: enable charging\n", __func__);
+ ret = tps65217_set_bits(charger->tps, TPS65217_REG_CHGCONFIG1,
+ TPS65217_CHGCONFIG1_CHG_EN,
+ TPS65217_CHGCONFIG1_CHG_EN,
+ TPS65217_PROTECT_NONE);
+ if (ret) {
+ dev_err(charger->dev,
+ "%s: Error in writing CHG_EN in reg 0x%x: %d\n",
+ __func__, TPS65217_REG_CHGCONFIG1, ret);
+ return ret;
+ }
+
+ charger->online = 1;
+
+ return 0;
+}
+
+static int tps65217_charger_get_property(struct power_supply *psy,
+ enum power_supply_property psp,
+ union power_supply_propval *val)
+{
+ struct tps65217_charger *charger = power_supply_get_drvdata(psy);
+
+ if (psp == POWER_SUPPLY_PROP_ONLINE) {
+ val->intval = charger->online;
+ return 0;
+ }
+ return -EINVAL;
+}
+
+static irqreturn_t tps65217_charger_irq(int irq, void *dev)
+{
+ int ret, val;
+ struct tps65217_charger *charger = dev;
+
+ charger->prev_online = charger->online;
+
+ ret = tps65217_reg_read(charger->tps, TPS65217_REG_STATUS, &val);
+ if (ret < 0) {
+ dev_err(charger->dev, "%s: Error in reading reg 0x%x\n",
+ __func__, TPS65217_REG_STATUS);
+ return IRQ_HANDLED;
+ }
+
+ dev_dbg(charger->dev, "%s: 0x%x\n", __func__, val);
+
+ /* check for charger status bit */
+ if (val & CHARGER_STATUS_PRESENT) {
+ ret = tps65217_enable_charging(charger);
+ if (ret) {
+ dev_err(charger->dev,
+ "failed to enable charger: %d\n", ret);
+ return IRQ_HANDLED;
+ }
+ } else {
+ charger->online = 0;
+ }
+
+ if (charger->prev_online != charger->online)
+ power_supply_changed(charger->psy);
+
+ ret = tps65217_reg_read(charger->tps, TPS65217_REG_CHGCONFIG0, &val);
+ if (ret < 0) {
+ dev_err(charger->dev, "%s: Error in reading reg 0x%x\n",
+ __func__, TPS65217_REG_CHGCONFIG0);
+ return IRQ_HANDLED;
+ }
+
+ if (val & TPS65217_CHGCONFIG0_ACTIVE)
+ dev_dbg(charger->dev, "%s: charger is charging\n", __func__);
+ else
+ dev_dbg(charger->dev,
+ "%s: charger is NOT charging\n", __func__);
+
+ return IRQ_HANDLED;
+}
+
+static int tps65217_charger_poll_task(void *data)
+{
+ set_freezable();
+
+ while (!kthread_should_stop()) {
+ schedule_timeout_interruptible(POLL_INTERVAL);
+ try_to_freeze();
+ tps65217_charger_irq(-1, data);
+ }
+ return 0;
+}
+
+static const struct power_supply_desc tps65217_charger_desc = {
+ .name = "tps65217-charger",
+ .type = POWER_SUPPLY_TYPE_MAINS,
+ .get_property = tps65217_charger_get_property,
+ .properties = tps65217_charger_props,
+ .num_properties = ARRAY_SIZE(tps65217_charger_props),
+};
+
+static int tps65217_charger_probe(struct platform_device *pdev)
+{
+ struct tps65217 *tps = dev_get_drvdata(pdev->dev.parent);
+ struct tps65217_charger *charger;
+ struct power_supply_config cfg = {};
+ struct task_struct *poll_task;
+ int irq[NUM_CHARGER_IRQS];
+ int ret;
+ int i;
+
+ charger = devm_kzalloc(&pdev->dev, sizeof(*charger), GFP_KERNEL);
+ if (!charger)
+ return -ENOMEM;
+
+ platform_set_drvdata(pdev, charger);
+ charger->tps = tps;
+ charger->dev = &pdev->dev;
+
+ cfg.of_node = pdev->dev.of_node;
+ cfg.drv_data = charger;
+
+ charger->psy = devm_power_supply_register(&pdev->dev,
+ &tps65217_charger_desc,
+ &cfg);
+ if (IS_ERR(charger->psy)) {
+ dev_err(&pdev->dev, "failed: power supply register\n");
+ return PTR_ERR(charger->psy);
+ }
+
+ irq[0] = platform_get_irq_byname(pdev, "USB");
+ irq[1] = platform_get_irq_byname(pdev, "AC");
+
+ ret = tps65217_config_charger(charger);
+ if (ret < 0) {
+ dev_err(charger->dev, "charger config failed, err %d\n", ret);
+ return ret;
+ }
+
+ /* Create a polling thread if an interrupt is invalid */
+ if (irq[0] < 0 || irq[1] < 0) {
+ poll_task = kthread_run(tps65217_charger_poll_task,
+ charger, "ktps65217charger");
+ if (IS_ERR(poll_task)) {
+ ret = PTR_ERR(poll_task);
+ dev_err(charger->dev,
+ "Unable to run kthread err %d\n", ret);
+ return ret;
+ }
+
+ charger->poll_task = poll_task;
+ return 0;
+ }
+
+ /* Create IRQ threads for charger interrupts */
+ for (i = 0; i < NUM_CHARGER_IRQS; i++) {
+ ret = devm_request_threaded_irq(&pdev->dev, irq[i], NULL,
+ tps65217_charger_irq,
+ IRQF_ONESHOT, "tps65217-charger",
+ charger);
+ if (ret) {
+ dev_err(charger->dev,
+ "Unable to register irq %d err %d\n", irq[i],
+ ret);
+ return ret;
+ }
+
+ /* Check current state */
+ tps65217_charger_irq(-1, charger);
+ }
+
+ return 0;
+}
+
+static int tps65217_charger_remove(struct platform_device *pdev)
+{
+ struct tps65217_charger *charger = platform_get_drvdata(pdev);
+
+ if (charger->poll_task)
+ kthread_stop(charger->poll_task);
+
+ return 0;
+}
+
+static const struct of_device_id tps65217_charger_match_table[] = {
+ { .compatible = "ti,tps65217-charger", },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, tps65217_charger_match_table);
+
+static struct platform_driver tps65217_charger_driver = {
+ .probe = tps65217_charger_probe,
+ .remove = tps65217_charger_remove,
+ .driver = {
+ .name = "tps65217-charger",
+ .of_match_table = of_match_ptr(tps65217_charger_match_table),
+ },
+
+};
+module_platform_driver(tps65217_charger_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Enric Balletbo Serra <enric.balletbo@collabora.com>");
+MODULE_DESCRIPTION("TPS65217 battery charger driver");
diff --git a/drivers/power/supply/twl4030_charger.c b/drivers/power/supply/twl4030_charger.c
new file mode 100644
index 000000000..1bc49b2e1
--- /dev/null
+++ b/drivers/power/supply/twl4030_charger.c
@@ -0,0 +1,1150 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * TWL4030/TPS65950 BCI (Battery Charger Interface) driver
+ *
+ * Copyright (C) 2010 Gražvydas Ignotas <notasas@gmail.com>
+ *
+ * based on twl4030_bci_battery.c by TI
+ * Copyright (C) 2008 Texas Instruments, Inc.
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/err.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/mfd/twl.h>
+#include <linux/power_supply.h>
+#include <linux/notifier.h>
+#include <linux/usb/otg.h>
+#include <linux/iio/consumer.h>
+
+#define TWL4030_BCIMDEN 0x00
+#define TWL4030_BCIMDKEY 0x01
+#define TWL4030_BCIMSTATEC 0x02
+#define TWL4030_BCIICHG 0x08
+#define TWL4030_BCIVAC 0x0a
+#define TWL4030_BCIVBUS 0x0c
+#define TWL4030_BCIMFSTS3 0x0F
+#define TWL4030_BCIMFSTS4 0x10
+#define TWL4030_BCICTL1 0x23
+#define TWL4030_BB_CFG 0x12
+#define TWL4030_BCIIREF1 0x27
+#define TWL4030_BCIIREF2 0x28
+#define TWL4030_BCIMFKEY 0x11
+#define TWL4030_BCIMFEN3 0x14
+#define TWL4030_BCIMFTH8 0x1d
+#define TWL4030_BCIMFTH9 0x1e
+#define TWL4030_BCIWDKEY 0x21
+
+#define TWL4030_BCIMFSTS1 0x01
+
+#define TWL4030_BCIAUTOWEN BIT(5)
+#define TWL4030_CONFIG_DONE BIT(4)
+#define TWL4030_CVENAC BIT(2)
+#define TWL4030_BCIAUTOUSB BIT(1)
+#define TWL4030_BCIAUTOAC BIT(0)
+#define TWL4030_CGAIN BIT(5)
+#define TWL4030_USBFASTMCHG BIT(2)
+#define TWL4030_STS_VBUS BIT(7)
+#define TWL4030_STS_USB_ID BIT(2)
+#define TWL4030_BBCHEN BIT(4)
+#define TWL4030_BBSEL_MASK 0x0c
+#define TWL4030_BBSEL_2V5 0x00
+#define TWL4030_BBSEL_3V0 0x04
+#define TWL4030_BBSEL_3V1 0x08
+#define TWL4030_BBSEL_3V2 0x0c
+#define TWL4030_BBISEL_MASK 0x03
+#define TWL4030_BBISEL_25uA 0x00
+#define TWL4030_BBISEL_150uA 0x01
+#define TWL4030_BBISEL_500uA 0x02
+#define TWL4030_BBISEL_1000uA 0x03
+
+#define TWL4030_BATSTSPCHG BIT(2)
+#define TWL4030_BATSTSMCHG BIT(6)
+
+/* BCI interrupts */
+#define TWL4030_WOVF BIT(0) /* Watchdog overflow */
+#define TWL4030_TMOVF BIT(1) /* Timer overflow */
+#define TWL4030_ICHGHIGH BIT(2) /* Battery charge current high */
+#define TWL4030_ICHGLOW BIT(3) /* Battery cc. low / FSM state change */
+#define TWL4030_ICHGEOC BIT(4) /* Battery current end-of-charge */
+#define TWL4030_TBATOR2 BIT(5) /* Battery temperature out of range 2 */
+#define TWL4030_TBATOR1 BIT(6) /* Battery temperature out of range 1 */
+#define TWL4030_BATSTS BIT(7) /* Battery status */
+
+#define TWL4030_VBATLVL BIT(0) /* VBAT level */
+#define TWL4030_VBATOV BIT(1) /* VBAT overvoltage */
+#define TWL4030_VBUSOV BIT(2) /* VBUS overvoltage */
+#define TWL4030_ACCHGOV BIT(3) /* Ac charger overvoltage */
+
+#define TWL4030_MSTATEC_USB BIT(4)
+#define TWL4030_MSTATEC_AC BIT(5)
+#define TWL4030_MSTATEC_MASK 0x0f
+#define TWL4030_MSTATEC_QUICK1 0x02
+#define TWL4030_MSTATEC_QUICK7 0x07
+#define TWL4030_MSTATEC_COMPLETE1 0x0b
+#define TWL4030_MSTATEC_COMPLETE4 0x0e
+
+/*
+ * If AC (Accessory Charger) voltage exceeds 4.5V (MADC 11)
+ * then AC is available.
+ */
+static inline int ac_available(struct iio_channel *channel_vac)
+{
+ int val, err;
+
+ if (!channel_vac)
+ return 0;
+
+ err = iio_read_channel_processed(channel_vac, &val);
+ if (err < 0)
+ return 0;
+ return val > 4500;
+}
+
+static bool allow_usb;
+module_param(allow_usb, bool, 0644);
+MODULE_PARM_DESC(allow_usb, "Allow USB charge drawing default current");
+
+struct twl4030_bci {
+ struct device *dev;
+ struct power_supply *ac;
+ struct power_supply *usb;
+ struct usb_phy *transceiver;
+ struct notifier_block usb_nb;
+ struct work_struct work;
+ int irq_chg;
+ int irq_bci;
+ int usb_enabled;
+
+ /*
+ * ichg_* and *_cur values in uA. If any are 'large', we set
+ * CGAIN to '1' which doubles the range for half the
+ * precision.
+ */
+ unsigned int ichg_eoc, ichg_lo, ichg_hi;
+ unsigned int usb_cur, ac_cur;
+ struct iio_channel *channel_vac;
+ bool ac_is_active;
+ int usb_mode, ac_mode; /* charging mode requested */
+#define CHARGE_OFF 0
+#define CHARGE_AUTO 1
+#define CHARGE_LINEAR 2
+
+ /* When setting the USB current we slowly increase the
+ * requested current until target is reached or the voltage
+ * drops below 4.75V. In the latter case we step back one
+ * step.
+ */
+ unsigned int usb_cur_target;
+ struct delayed_work current_worker;
+#define USB_CUR_STEP 20000 /* 20mA at a time */
+#define USB_MIN_VOLT 4750000 /* 4.75V */
+#define USB_CUR_DELAY msecs_to_jiffies(100)
+#define USB_MAX_CURRENT 1700000 /* TWL4030 caps at 1.7A */
+
+ unsigned long event;
+};
+
+/* strings for 'usb_mode' values */
+static const char *modes[] = { "off", "auto", "continuous" };
+
+/*
+ * clear and set bits on an given register on a given module
+ */
+static int twl4030_clear_set(u8 mod_no, u8 clear, u8 set, u8 reg)
+{
+ u8 val = 0;
+ int ret;
+
+ ret = twl_i2c_read_u8(mod_no, &val, reg);
+ if (ret)
+ return ret;
+
+ val &= ~clear;
+ val |= set;
+
+ return twl_i2c_write_u8(mod_no, val, reg);
+}
+
+static int twl4030_bci_read(u8 reg, u8 *val)
+{
+ return twl_i2c_read_u8(TWL_MODULE_MAIN_CHARGE, val, reg);
+}
+
+static int twl4030_clear_set_boot_bci(u8 clear, u8 set)
+{
+ return twl4030_clear_set(TWL_MODULE_PM_MASTER, clear,
+ TWL4030_CONFIG_DONE | TWL4030_BCIAUTOWEN | set,
+ TWL4030_PM_MASTER_BOOT_BCI);
+}
+
+static int twl4030bci_read_adc_val(u8 reg)
+{
+ int ret, temp;
+ u8 val;
+
+ /* read MSB */
+ ret = twl4030_bci_read(reg + 1, &val);
+ if (ret)
+ return ret;
+
+ temp = (int)(val & 0x03) << 8;
+
+ /* read LSB */
+ ret = twl4030_bci_read(reg, &val);
+ if (ret)
+ return ret;
+
+ return temp | val;
+}
+
+/*
+ * TI provided formulas:
+ * CGAIN == 0: ICHG = (BCIICHG * 1.7) / (2^10 - 1) - 0.85
+ * CGAIN == 1: ICHG = (BCIICHG * 3.4) / (2^10 - 1) - 1.7
+ * Here we use integer approximation of:
+ * CGAIN == 0: val * 1.6618 - 0.85 * 1000
+ * CGAIN == 1: (val * 1.6618 - 0.85 * 1000) * 2
+ */
+/*
+ * convert twl register value for currents into uA
+ */
+static int regval2ua(int regval, bool cgain)
+{
+ if (cgain)
+ return (regval * 16618 - 8500 * 1000) / 5;
+ else
+ return (regval * 16618 - 8500 * 1000) / 10;
+}
+
+/*
+ * convert uA currents into twl register value
+ */
+static int ua2regval(int ua, bool cgain)
+{
+ int ret;
+ if (cgain)
+ ua /= 2;
+ ret = (ua * 10 + 8500 * 1000) / 16618;
+ /* rounding problems */
+ if (ret < 512)
+ ret = 512;
+ return ret;
+}
+
+static int twl4030_charger_update_current(struct twl4030_bci *bci)
+{
+ int status;
+ int cur;
+ unsigned reg, cur_reg;
+ u8 bcictl1, oldreg, fullreg;
+ bool cgain = false;
+ u8 boot_bci;
+
+ /*
+ * If AC (Accessory Charger) voltage exceeds 4.5V (MADC 11)
+ * and AC is enabled, set current for 'ac'
+ */
+ if (ac_available(bci->channel_vac)) {
+ cur = bci->ac_cur;
+ bci->ac_is_active = true;
+ } else {
+ cur = bci->usb_cur;
+ bci->ac_is_active = false;
+ if (cur > bci->usb_cur_target) {
+ cur = bci->usb_cur_target;
+ bci->usb_cur = cur;
+ }
+ if (cur < bci->usb_cur_target)
+ schedule_delayed_work(&bci->current_worker, USB_CUR_DELAY);
+ }
+
+ /* First, check thresholds and see if cgain is needed */
+ if (bci->ichg_eoc >= 200000)
+ cgain = true;
+ if (bci->ichg_lo >= 400000)
+ cgain = true;
+ if (bci->ichg_hi >= 820000)
+ cgain = true;
+ if (cur > 852000)
+ cgain = true;
+
+ status = twl4030_bci_read(TWL4030_BCICTL1, &bcictl1);
+ if (status < 0)
+ return status;
+ if (twl_i2c_read_u8(TWL_MODULE_PM_MASTER, &boot_bci,
+ TWL4030_PM_MASTER_BOOT_BCI) < 0)
+ boot_bci = 0;
+ boot_bci &= 7;
+
+ if ((!!cgain) != !!(bcictl1 & TWL4030_CGAIN))
+ /* Need to turn for charging while we change the
+ * CGAIN bit. Leave it off while everything is
+ * updated.
+ */
+ twl4030_clear_set_boot_bci(boot_bci, 0);
+
+ /*
+ * For ichg_eoc, the hardware only supports reg values matching
+ * 100XXXX000, and requires the XXXX be stored in the high nibble
+ * of TWL4030_BCIMFTH8.
+ */
+ reg = ua2regval(bci->ichg_eoc, cgain);
+ if (reg > 0x278)
+ reg = 0x278;
+ if (reg < 0x200)
+ reg = 0x200;
+ reg = (reg >> 3) & 0xf;
+ fullreg = reg << 4;
+
+ /*
+ * For ichg_lo, reg value must match 10XXXX0000.
+ * XXXX is stored in low nibble of TWL4030_BCIMFTH8.
+ */
+ reg = ua2regval(bci->ichg_lo, cgain);
+ if (reg > 0x2F0)
+ reg = 0x2F0;
+ if (reg < 0x200)
+ reg = 0x200;
+ reg = (reg >> 4) & 0xf;
+ fullreg |= reg;
+
+ /* ichg_eoc and ichg_lo live in same register */
+ status = twl4030_bci_read(TWL4030_BCIMFTH8, &oldreg);
+ if (status < 0)
+ return status;
+ if (oldreg != fullreg) {
+ status = twl_i2c_write_u8(TWL_MODULE_MAIN_CHARGE, 0xF4,
+ TWL4030_BCIMFKEY);
+ if (status < 0)
+ return status;
+ twl_i2c_write_u8(TWL_MODULE_MAIN_CHARGE,
+ fullreg, TWL4030_BCIMFTH8);
+ }
+
+ /* ichg_hi threshold must be 1XXXX01100 (I think) */
+ reg = ua2regval(bci->ichg_hi, cgain);
+ if (reg > 0x3E0)
+ reg = 0x3E0;
+ if (reg < 0x200)
+ reg = 0x200;
+ fullreg = (reg >> 5) & 0xF;
+ fullreg <<= 4;
+ status = twl4030_bci_read(TWL4030_BCIMFTH9, &oldreg);
+ if (status < 0)
+ return status;
+ if ((oldreg & 0xF0) != fullreg) {
+ fullreg |= (oldreg & 0x0F);
+ status = twl_i2c_write_u8(TWL_MODULE_MAIN_CHARGE, 0xE7,
+ TWL4030_BCIMFKEY);
+ if (status < 0)
+ return status;
+ twl_i2c_write_u8(TWL_MODULE_MAIN_CHARGE,
+ fullreg, TWL4030_BCIMFTH9);
+ }
+
+ /*
+ * And finally, set the current. This is stored in
+ * two registers.
+ */
+ reg = ua2regval(cur, cgain);
+ /* we have only 10 bits */
+ if (reg > 0x3ff)
+ reg = 0x3ff;
+ status = twl4030_bci_read(TWL4030_BCIIREF1, &oldreg);
+ if (status < 0)
+ return status;
+ cur_reg = oldreg;
+ status = twl4030_bci_read(TWL4030_BCIIREF2, &oldreg);
+ if (status < 0)
+ return status;
+ cur_reg |= oldreg << 8;
+ if (reg != oldreg) {
+ /* disable write protection for one write access for
+ * BCIIREF */
+ status = twl_i2c_write_u8(TWL_MODULE_MAIN_CHARGE, 0xE7,
+ TWL4030_BCIMFKEY);
+ if (status < 0)
+ return status;
+ status = twl_i2c_write_u8(TWL_MODULE_MAIN_CHARGE,
+ (reg & 0x100) ? 3 : 2,
+ TWL4030_BCIIREF2);
+ if (status < 0)
+ return status;
+ /* disable write protection for one write access for
+ * BCIIREF */
+ status = twl_i2c_write_u8(TWL_MODULE_MAIN_CHARGE, 0xE7,
+ TWL4030_BCIMFKEY);
+ if (status < 0)
+ return status;
+ status = twl_i2c_write_u8(TWL_MODULE_MAIN_CHARGE,
+ reg & 0xff,
+ TWL4030_BCIIREF1);
+ }
+ if ((!!cgain) != !!(bcictl1 & TWL4030_CGAIN)) {
+ /* Flip CGAIN and re-enable charging */
+ bcictl1 ^= TWL4030_CGAIN;
+ twl_i2c_write_u8(TWL_MODULE_MAIN_CHARGE,
+ bcictl1, TWL4030_BCICTL1);
+ twl4030_clear_set_boot_bci(0, boot_bci);
+ }
+ return 0;
+}
+
+static int twl4030_charger_get_current(void);
+
+static void twl4030_current_worker(struct work_struct *data)
+{
+ int v, curr;
+ int res;
+ struct twl4030_bci *bci = container_of(data, struct twl4030_bci,
+ current_worker.work);
+
+ res = twl4030bci_read_adc_val(TWL4030_BCIVBUS);
+ if (res < 0)
+ v = 0;
+ else
+ /* BCIVBUS uses ADCIN8, 7/1023 V/step */
+ v = res * 6843;
+ curr = twl4030_charger_get_current();
+
+ dev_dbg(bci->dev, "v=%d cur=%d limit=%d target=%d\n", v, curr,
+ bci->usb_cur, bci->usb_cur_target);
+
+ if (v < USB_MIN_VOLT) {
+ /* Back up and stop adjusting. */
+ if (bci->usb_cur >= USB_CUR_STEP)
+ bci->usb_cur -= USB_CUR_STEP;
+ bci->usb_cur_target = bci->usb_cur;
+ } else if (bci->usb_cur >= bci->usb_cur_target ||
+ bci->usb_cur + USB_CUR_STEP > USB_MAX_CURRENT) {
+ /* Reached target and voltage is OK - stop */
+ return;
+ } else {
+ bci->usb_cur += USB_CUR_STEP;
+ schedule_delayed_work(&bci->current_worker, USB_CUR_DELAY);
+ }
+ twl4030_charger_update_current(bci);
+}
+
+/*
+ * Enable/Disable USB Charge functionality.
+ */
+static int twl4030_charger_enable_usb(struct twl4030_bci *bci, bool enable)
+{
+ int ret;
+ u32 reg;
+
+ if (bci->usb_mode == CHARGE_OFF)
+ enable = false;
+ if (enable && !IS_ERR_OR_NULL(bci->transceiver)) {
+
+ twl4030_charger_update_current(bci);
+
+ /* Need to keep phy powered */
+ if (!bci->usb_enabled) {
+ pm_runtime_get_sync(bci->transceiver->dev);
+ bci->usb_enabled = 1;
+ }
+
+ if (bci->usb_mode == CHARGE_AUTO) {
+ /* Enable interrupts now. */
+ reg = ~(u32)(TWL4030_ICHGLOW | TWL4030_ICHGEOC |
+ TWL4030_TBATOR2 | TWL4030_TBATOR1 |
+ TWL4030_BATSTS);
+ ret = twl_i2c_write_u8(TWL4030_MODULE_INTERRUPTS, reg,
+ TWL4030_INTERRUPTS_BCIIMR1A);
+ if (ret < 0) {
+ dev_err(bci->dev,
+ "failed to unmask interrupts: %d\n",
+ ret);
+ return ret;
+ }
+ /* forcing the field BCIAUTOUSB (BOOT_BCI[1]) to 1 */
+ ret = twl4030_clear_set_boot_bci(0, TWL4030_BCIAUTOUSB);
+ }
+
+ /* forcing USBFASTMCHG(BCIMFSTS4[2]) to 1 */
+ ret = twl4030_clear_set(TWL_MODULE_MAIN_CHARGE, 0,
+ TWL4030_USBFASTMCHG, TWL4030_BCIMFSTS4);
+ if (bci->usb_mode == CHARGE_LINEAR) {
+ /* Enable interrupts now. */
+ reg = ~(u32)(TWL4030_ICHGLOW | TWL4030_TBATOR2 |
+ TWL4030_TBATOR1 | TWL4030_BATSTS);
+ ret = twl_i2c_write_u8(TWL4030_MODULE_INTERRUPTS, reg,
+ TWL4030_INTERRUPTS_BCIIMR1A);
+ if (ret < 0) {
+ dev_err(bci->dev,
+ "failed to unmask interrupts: %d\n",
+ ret);
+ return ret;
+ }
+ twl4030_clear_set_boot_bci(TWL4030_BCIAUTOAC|TWL4030_CVENAC, 0);
+ /* Watch dog key: WOVF acknowledge */
+ ret = twl_i2c_write_u8(TWL_MODULE_MAIN_CHARGE, 0x33,
+ TWL4030_BCIWDKEY);
+ /* 0x24 + EKEY6: off mode */
+ ret = twl_i2c_write_u8(TWL_MODULE_MAIN_CHARGE, 0x2a,
+ TWL4030_BCIMDKEY);
+ /* EKEY2: Linear charge: USB path */
+ ret = twl_i2c_write_u8(TWL_MODULE_MAIN_CHARGE, 0x26,
+ TWL4030_BCIMDKEY);
+ /* WDKEY5: stop watchdog count */
+ ret = twl_i2c_write_u8(TWL_MODULE_MAIN_CHARGE, 0xf3,
+ TWL4030_BCIWDKEY);
+ /* enable MFEN3 access */
+ ret = twl_i2c_write_u8(TWL_MODULE_MAIN_CHARGE, 0x9c,
+ TWL4030_BCIMFKEY);
+ /* ICHGEOCEN - end-of-charge monitor (current < 80mA)
+ * (charging continues)
+ * ICHGLOWEN - current level monitor (charge continues)
+ * don't monitor over-current or heat save
+ */
+ ret = twl_i2c_write_u8(TWL_MODULE_MAIN_CHARGE, 0xf0,
+ TWL4030_BCIMFEN3);
+ }
+ } else {
+ ret = twl4030_clear_set_boot_bci(TWL4030_BCIAUTOUSB, 0);
+ ret |= twl_i2c_write_u8(TWL_MODULE_MAIN_CHARGE, 0x2a,
+ TWL4030_BCIMDKEY);
+ if (bci->usb_enabled) {
+ pm_runtime_mark_last_busy(bci->transceiver->dev);
+ pm_runtime_put_autosuspend(bci->transceiver->dev);
+ bci->usb_enabled = 0;
+ }
+ bci->usb_cur = 0;
+ }
+
+ return ret;
+}
+
+/*
+ * Enable/Disable AC Charge funtionality.
+ */
+static int twl4030_charger_enable_ac(struct twl4030_bci *bci, bool enable)
+{
+ int ret;
+
+ if (bci->ac_mode == CHARGE_OFF)
+ enable = false;
+
+ if (enable)
+ ret = twl4030_clear_set_boot_bci(0, TWL4030_BCIAUTOAC);
+ else
+ ret = twl4030_clear_set_boot_bci(TWL4030_BCIAUTOAC, 0);
+
+ return ret;
+}
+
+/*
+ * Enable/Disable charging of Backup Battery.
+ */
+static int twl4030_charger_enable_backup(int uvolt, int uamp)
+{
+ int ret;
+ u8 flags;
+
+ if (uvolt < 2500000 ||
+ uamp < 25) {
+ /* disable charging of backup battery */
+ ret = twl4030_clear_set(TWL_MODULE_PM_RECEIVER,
+ TWL4030_BBCHEN, 0, TWL4030_BB_CFG);
+ return ret;
+ }
+
+ flags = TWL4030_BBCHEN;
+ if (uvolt >= 3200000)
+ flags |= TWL4030_BBSEL_3V2;
+ else if (uvolt >= 3100000)
+ flags |= TWL4030_BBSEL_3V1;
+ else if (uvolt >= 3000000)
+ flags |= TWL4030_BBSEL_3V0;
+ else
+ flags |= TWL4030_BBSEL_2V5;
+
+ if (uamp >= 1000)
+ flags |= TWL4030_BBISEL_1000uA;
+ else if (uamp >= 500)
+ flags |= TWL4030_BBISEL_500uA;
+ else if (uamp >= 150)
+ flags |= TWL4030_BBISEL_150uA;
+ else
+ flags |= TWL4030_BBISEL_25uA;
+
+ ret = twl4030_clear_set(TWL_MODULE_PM_RECEIVER,
+ TWL4030_BBSEL_MASK | TWL4030_BBISEL_MASK,
+ flags,
+ TWL4030_BB_CFG);
+
+ return ret;
+}
+
+/*
+ * TWL4030 CHG_PRES (AC charger presence) events
+ */
+static irqreturn_t twl4030_charger_interrupt(int irq, void *arg)
+{
+ struct twl4030_bci *bci = arg;
+
+ dev_dbg(bci->dev, "CHG_PRES irq\n");
+ /* reset current on each 'plug' event */
+ bci->ac_cur = 500000;
+ twl4030_charger_update_current(bci);
+ power_supply_changed(bci->ac);
+ power_supply_changed(bci->usb);
+
+ return IRQ_HANDLED;
+}
+
+/*
+ * TWL4030 BCI monitoring events
+ */
+static irqreturn_t twl4030_bci_interrupt(int irq, void *arg)
+{
+ struct twl4030_bci *bci = arg;
+ u8 irqs1, irqs2;
+ int ret;
+
+ ret = twl_i2c_read_u8(TWL4030_MODULE_INTERRUPTS, &irqs1,
+ TWL4030_INTERRUPTS_BCIISR1A);
+ if (ret < 0)
+ return IRQ_HANDLED;
+
+ ret = twl_i2c_read_u8(TWL4030_MODULE_INTERRUPTS, &irqs2,
+ TWL4030_INTERRUPTS_BCIISR2A);
+ if (ret < 0)
+ return IRQ_HANDLED;
+
+ dev_dbg(bci->dev, "BCI irq %02x %02x\n", irqs2, irqs1);
+
+ if (irqs1 & (TWL4030_ICHGLOW | TWL4030_ICHGEOC)) {
+ /* charger state change, inform the core */
+ power_supply_changed(bci->ac);
+ power_supply_changed(bci->usb);
+ }
+ twl4030_charger_update_current(bci);
+
+ /* various monitoring events, for now we just log them here */
+ if (irqs1 & (TWL4030_TBATOR2 | TWL4030_TBATOR1))
+ dev_warn(bci->dev, "battery temperature out of range\n");
+
+ if (irqs1 & TWL4030_BATSTS)
+ dev_crit(bci->dev, "battery disconnected\n");
+
+ if (irqs2 & TWL4030_VBATOV)
+ dev_crit(bci->dev, "VBAT overvoltage\n");
+
+ if (irqs2 & TWL4030_VBUSOV)
+ dev_crit(bci->dev, "VBUS overvoltage\n");
+
+ if (irqs2 & TWL4030_ACCHGOV)
+ dev_crit(bci->dev, "Ac charger overvoltage\n");
+
+ return IRQ_HANDLED;
+}
+
+static void twl4030_bci_usb_work(struct work_struct *data)
+{
+ struct twl4030_bci *bci = container_of(data, struct twl4030_bci, work);
+
+ switch (bci->event) {
+ case USB_EVENT_VBUS:
+ case USB_EVENT_CHARGER:
+ twl4030_charger_enable_usb(bci, true);
+ break;
+ case USB_EVENT_NONE:
+ twl4030_charger_enable_usb(bci, false);
+ break;
+ }
+}
+
+static int twl4030_bci_usb_ncb(struct notifier_block *nb, unsigned long val,
+ void *priv)
+{
+ struct twl4030_bci *bci = container_of(nb, struct twl4030_bci, usb_nb);
+
+ dev_dbg(bci->dev, "OTG notify %lu\n", val);
+
+ /* reset current on each 'plug' event */
+ if (allow_usb)
+ bci->usb_cur_target = 500000;
+ else
+ bci->usb_cur_target = 100000;
+
+ bci->event = val;
+ schedule_work(&bci->work);
+
+ return NOTIFY_OK;
+}
+
+/*
+ * sysfs charger enabled store
+ */
+static ssize_t
+twl4030_bci_mode_store(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t n)
+{
+ struct twl4030_bci *bci = dev_get_drvdata(dev->parent);
+ int mode;
+ int status;
+
+ mode = sysfs_match_string(modes, buf);
+ if (mode < 0)
+ return mode;
+
+ if (dev == &bci->ac->dev) {
+ if (mode == 2)
+ return -EINVAL;
+ twl4030_charger_enable_ac(bci, false);
+ bci->ac_mode = mode;
+ status = twl4030_charger_enable_ac(bci, true);
+ } else {
+ twl4030_charger_enable_usb(bci, false);
+ bci->usb_mode = mode;
+ status = twl4030_charger_enable_usb(bci, true);
+ }
+ return (status == 0) ? n : status;
+}
+
+/*
+ * sysfs charger enabled show
+ */
+static ssize_t
+twl4030_bci_mode_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct twl4030_bci *bci = dev_get_drvdata(dev->parent);
+ int len = 0;
+ int i;
+ int mode = bci->usb_mode;
+
+ if (dev == &bci->ac->dev)
+ mode = bci->ac_mode;
+
+ for (i = 0; i < ARRAY_SIZE(modes); i++)
+ if (mode == i)
+ len += scnprintf(buf+len, PAGE_SIZE-len,
+ "[%s] ", modes[i]);
+ else
+ len += scnprintf(buf+len, PAGE_SIZE-len,
+ "%s ", modes[i]);
+ buf[len-1] = '\n';
+ return len;
+}
+static DEVICE_ATTR(mode, 0644, twl4030_bci_mode_show,
+ twl4030_bci_mode_store);
+
+static int twl4030_charger_get_current(void)
+{
+ int curr;
+ int ret;
+ u8 bcictl1;
+
+ curr = twl4030bci_read_adc_val(TWL4030_BCIICHG);
+ if (curr < 0)
+ return curr;
+
+ ret = twl4030_bci_read(TWL4030_BCICTL1, &bcictl1);
+ if (ret)
+ return ret;
+
+ return regval2ua(curr, bcictl1 & TWL4030_CGAIN);
+}
+
+/*
+ * Returns the main charge FSM state
+ * Or < 0 on failure.
+ */
+static int twl4030bci_state(struct twl4030_bci *bci)
+{
+ int ret;
+ u8 state;
+
+ ret = twl4030_bci_read(TWL4030_BCIMSTATEC, &state);
+ if (ret) {
+ dev_err(bci->dev, "error reading BCIMSTATEC\n");
+ return ret;
+ }
+
+ dev_dbg(bci->dev, "state: %02x\n", state);
+
+ return state;
+}
+
+static int twl4030_bci_state_to_status(int state)
+{
+ state &= TWL4030_MSTATEC_MASK;
+ if (TWL4030_MSTATEC_QUICK1 <= state && state <= TWL4030_MSTATEC_QUICK7)
+ return POWER_SUPPLY_STATUS_CHARGING;
+ else if (TWL4030_MSTATEC_COMPLETE1 <= state &&
+ state <= TWL4030_MSTATEC_COMPLETE4)
+ return POWER_SUPPLY_STATUS_FULL;
+ else
+ return POWER_SUPPLY_STATUS_NOT_CHARGING;
+}
+
+static int twl4030_bci_get_property(struct power_supply *psy,
+ enum power_supply_property psp,
+ union power_supply_propval *val)
+{
+ struct twl4030_bci *bci = dev_get_drvdata(psy->dev.parent);
+ int is_charging;
+ int state;
+ int ret;
+
+ state = twl4030bci_state(bci);
+ if (state < 0)
+ return state;
+
+ if (psy->desc->type == POWER_SUPPLY_TYPE_USB)
+ is_charging = state & TWL4030_MSTATEC_USB;
+ else
+ is_charging = state & TWL4030_MSTATEC_AC;
+ if (!is_charging) {
+ u8 s;
+ ret = twl4030_bci_read(TWL4030_BCIMDEN, &s);
+ if (ret < 0)
+ return ret;
+ if (psy->desc->type == POWER_SUPPLY_TYPE_USB)
+ is_charging = s & 1;
+ else
+ is_charging = s & 2;
+ if (is_charging)
+ /* A little white lie */
+ state = TWL4030_MSTATEC_QUICK1;
+ }
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_STATUS:
+ if (is_charging)
+ val->intval = twl4030_bci_state_to_status(state);
+ else
+ val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING;
+ break;
+ case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+ /* charging must be active for meaningful result */
+ if (!is_charging)
+ return -ENODATA;
+ if (psy->desc->type == POWER_SUPPLY_TYPE_USB) {
+ ret = twl4030bci_read_adc_val(TWL4030_BCIVBUS);
+ if (ret < 0)
+ return ret;
+ /* BCIVBUS uses ADCIN8, 7/1023 V/step */
+ val->intval = ret * 6843;
+ } else {
+ ret = twl4030bci_read_adc_val(TWL4030_BCIVAC);
+ if (ret < 0)
+ return ret;
+ /* BCIVAC uses ADCIN11, 10/1023 V/step */
+ val->intval = ret * 9775;
+ }
+ break;
+ case POWER_SUPPLY_PROP_CURRENT_NOW:
+ if (!is_charging)
+ return -ENODATA;
+ /* current measurement is shared between AC and USB */
+ ret = twl4030_charger_get_current();
+ if (ret < 0)
+ return ret;
+ val->intval = ret;
+ break;
+ case POWER_SUPPLY_PROP_ONLINE:
+ val->intval = is_charging &&
+ twl4030_bci_state_to_status(state) !=
+ POWER_SUPPLY_STATUS_NOT_CHARGING;
+ break;
+ case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT:
+ val->intval = -1;
+ if (psy->desc->type != POWER_SUPPLY_TYPE_USB) {
+ if (!bci->ac_is_active)
+ val->intval = bci->ac_cur;
+ } else {
+ if (bci->ac_is_active)
+ val->intval = bci->usb_cur_target;
+ }
+ if (val->intval < 0) {
+ u8 bcictl1;
+
+ val->intval = twl4030bci_read_adc_val(TWL4030_BCIIREF1);
+ if (val->intval < 0)
+ return val->intval;
+ ret = twl4030_bci_read(TWL4030_BCICTL1, &bcictl1);
+ if (ret < 0)
+ return ret;
+ val->intval = regval2ua(val->intval, bcictl1 &
+ TWL4030_CGAIN);
+ }
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int twl4030_bci_set_property(struct power_supply *psy,
+ enum power_supply_property psp,
+ const union power_supply_propval *val)
+{
+ struct twl4030_bci *bci = dev_get_drvdata(psy->dev.parent);
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT:
+ if (psy->desc->type == POWER_SUPPLY_TYPE_USB)
+ bci->usb_cur_target = val->intval;
+ else
+ bci->ac_cur = val->intval;
+ twl4030_charger_update_current(bci);
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int twl4030_bci_property_is_writeable(struct power_supply *psy,
+ enum power_supply_property psp)
+{
+ switch (psp) {
+ case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT:
+ return true;
+ default:
+ return false;
+ }
+}
+
+static enum power_supply_property twl4030_charger_props[] = {
+ POWER_SUPPLY_PROP_STATUS,
+ POWER_SUPPLY_PROP_ONLINE,
+ POWER_SUPPLY_PROP_VOLTAGE_NOW,
+ POWER_SUPPLY_PROP_CURRENT_NOW,
+ POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT,
+};
+
+#ifdef CONFIG_OF
+static const struct twl4030_bci_platform_data *
+twl4030_bci_parse_dt(struct device *dev)
+{
+ struct device_node *np = dev->of_node;
+ struct twl4030_bci_platform_data *pdata;
+ u32 num;
+
+ if (!np)
+ return NULL;
+ pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
+ if (!pdata)
+ return pdata;
+
+ if (of_property_read_u32(np, "ti,bb-uvolt", &num) == 0)
+ pdata->bb_uvolt = num;
+ if (of_property_read_u32(np, "ti,bb-uamp", &num) == 0)
+ pdata->bb_uamp = num;
+ return pdata;
+}
+#else
+static inline const struct twl4030_bci_platform_data *
+twl4030_bci_parse_dt(struct device *dev)
+{
+ return NULL;
+}
+#endif
+
+static const struct power_supply_desc twl4030_bci_ac_desc = {
+ .name = "twl4030_ac",
+ .type = POWER_SUPPLY_TYPE_MAINS,
+ .properties = twl4030_charger_props,
+ .num_properties = ARRAY_SIZE(twl4030_charger_props),
+ .get_property = twl4030_bci_get_property,
+ .set_property = twl4030_bci_set_property,
+ .property_is_writeable = twl4030_bci_property_is_writeable,
+};
+
+static const struct power_supply_desc twl4030_bci_usb_desc = {
+ .name = "twl4030_usb",
+ .type = POWER_SUPPLY_TYPE_USB,
+ .properties = twl4030_charger_props,
+ .num_properties = ARRAY_SIZE(twl4030_charger_props),
+ .get_property = twl4030_bci_get_property,
+ .set_property = twl4030_bci_set_property,
+ .property_is_writeable = twl4030_bci_property_is_writeable,
+};
+
+static int twl4030_bci_probe(struct platform_device *pdev)
+{
+ struct twl4030_bci *bci;
+ const struct twl4030_bci_platform_data *pdata = pdev->dev.platform_data;
+ int ret;
+ u32 reg;
+
+ bci = devm_kzalloc(&pdev->dev, sizeof(*bci), GFP_KERNEL);
+ if (bci == NULL)
+ return -ENOMEM;
+
+ if (!pdata)
+ pdata = twl4030_bci_parse_dt(&pdev->dev);
+
+ bci->ichg_eoc = 80100; /* Stop charging when current drops to here */
+ bci->ichg_lo = 241000; /* Low threshold */
+ bci->ichg_hi = 500000; /* High threshold */
+ bci->ac_cur = 500000; /* 500mA */
+ if (allow_usb)
+ bci->usb_cur_target = 500000; /* 500mA */
+ else
+ bci->usb_cur_target = 100000; /* 100mA */
+ bci->usb_mode = CHARGE_AUTO;
+ bci->ac_mode = CHARGE_AUTO;
+
+ bci->dev = &pdev->dev;
+ bci->irq_chg = platform_get_irq(pdev, 0);
+ bci->irq_bci = platform_get_irq(pdev, 1);
+
+ platform_set_drvdata(pdev, bci);
+
+ INIT_WORK(&bci->work, twl4030_bci_usb_work);
+ INIT_DELAYED_WORK(&bci->current_worker, twl4030_current_worker);
+
+ bci->channel_vac = devm_iio_channel_get(&pdev->dev, "vac");
+ if (IS_ERR(bci->channel_vac)) {
+ ret = PTR_ERR(bci->channel_vac);
+ if (ret == -EPROBE_DEFER)
+ return ret; /* iio not ready */
+ dev_warn(&pdev->dev, "could not request vac iio channel (%d)",
+ ret);
+ bci->channel_vac = NULL;
+ }
+
+ if (bci->dev->of_node) {
+ struct device_node *phynode;
+
+ phynode = of_get_compatible_child(bci->dev->of_node->parent,
+ "ti,twl4030-usb");
+ if (phynode) {
+ bci->usb_nb.notifier_call = twl4030_bci_usb_ncb;
+ bci->transceiver = devm_usb_get_phy_by_node(
+ bci->dev, phynode, &bci->usb_nb);
+ of_node_put(phynode);
+ if (IS_ERR(bci->transceiver)) {
+ ret = PTR_ERR(bci->transceiver);
+ if (ret == -EPROBE_DEFER)
+ return ret; /* phy not ready */
+ dev_warn(&pdev->dev, "could not request transceiver (%d)",
+ ret);
+ bci->transceiver = NULL;
+ }
+ }
+ }
+
+ bci->ac = devm_power_supply_register(&pdev->dev, &twl4030_bci_ac_desc,
+ NULL);
+ if (IS_ERR(bci->ac)) {
+ ret = PTR_ERR(bci->ac);
+ dev_err(&pdev->dev, "failed to register ac: %d\n", ret);
+ return ret;
+ }
+
+ bci->usb = devm_power_supply_register(&pdev->dev, &twl4030_bci_usb_desc,
+ NULL);
+ if (IS_ERR(bci->usb)) {
+ ret = PTR_ERR(bci->usb);
+ dev_err(&pdev->dev, "failed to register usb: %d\n", ret);
+ return ret;
+ }
+
+ ret = devm_request_threaded_irq(&pdev->dev, bci->irq_chg, NULL,
+ twl4030_charger_interrupt, IRQF_ONESHOT, pdev->name,
+ bci);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "could not request irq %d, status %d\n",
+ bci->irq_chg, ret);
+ return ret;
+ }
+
+ ret = devm_request_threaded_irq(&pdev->dev, bci->irq_bci, NULL,
+ twl4030_bci_interrupt, IRQF_ONESHOT, pdev->name, bci);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "could not request irq %d, status %d\n",
+ bci->irq_bci, ret);
+ return ret;
+ }
+
+ /* Enable interrupts now. */
+ reg = ~(u32)(TWL4030_ICHGLOW | TWL4030_ICHGEOC | TWL4030_TBATOR2 |
+ TWL4030_TBATOR1 | TWL4030_BATSTS);
+ ret = twl_i2c_write_u8(TWL4030_MODULE_INTERRUPTS, reg,
+ TWL4030_INTERRUPTS_BCIIMR1A);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "failed to unmask interrupts: %d\n", ret);
+ return ret;
+ }
+
+ reg = ~(u32)(TWL4030_VBATOV | TWL4030_VBUSOV | TWL4030_ACCHGOV);
+ ret = twl_i2c_write_u8(TWL4030_MODULE_INTERRUPTS, reg,
+ TWL4030_INTERRUPTS_BCIIMR2A);
+ if (ret < 0)
+ dev_warn(&pdev->dev, "failed to unmask interrupts: %d\n", ret);
+
+ twl4030_charger_update_current(bci);
+ if (device_create_file(&bci->usb->dev, &dev_attr_mode))
+ dev_warn(&pdev->dev, "could not create sysfs file\n");
+ if (device_create_file(&bci->ac->dev, &dev_attr_mode))
+ dev_warn(&pdev->dev, "could not create sysfs file\n");
+
+ twl4030_charger_enable_ac(bci, true);
+ if (!IS_ERR_OR_NULL(bci->transceiver))
+ twl4030_bci_usb_ncb(&bci->usb_nb,
+ bci->transceiver->last_event,
+ NULL);
+ else
+ twl4030_charger_enable_usb(bci, false);
+ if (pdata)
+ twl4030_charger_enable_backup(pdata->bb_uvolt,
+ pdata->bb_uamp);
+ else
+ twl4030_charger_enable_backup(0, 0);
+
+ return 0;
+}
+
+static int twl4030_bci_remove(struct platform_device *pdev)
+{
+ struct twl4030_bci *bci = platform_get_drvdata(pdev);
+
+ twl4030_charger_enable_ac(bci, false);
+ twl4030_charger_enable_usb(bci, false);
+ twl4030_charger_enable_backup(0, 0);
+
+ device_remove_file(&bci->usb->dev, &dev_attr_mode);
+ device_remove_file(&bci->ac->dev, &dev_attr_mode);
+ /* mask interrupts */
+ twl_i2c_write_u8(TWL4030_MODULE_INTERRUPTS, 0xff,
+ TWL4030_INTERRUPTS_BCIIMR1A);
+ twl_i2c_write_u8(TWL4030_MODULE_INTERRUPTS, 0xff,
+ TWL4030_INTERRUPTS_BCIIMR2A);
+
+ return 0;
+}
+
+static const struct of_device_id twl_bci_of_match[] = {
+ {.compatible = "ti,twl4030-bci", },
+ { }
+};
+MODULE_DEVICE_TABLE(of, twl_bci_of_match);
+
+static struct platform_driver twl4030_bci_driver = {
+ .probe = twl4030_bci_probe,
+ .remove = twl4030_bci_remove,
+ .driver = {
+ .name = "twl4030_bci",
+ .of_match_table = of_match_ptr(twl_bci_of_match),
+ },
+};
+module_platform_driver(twl4030_bci_driver);
+
+MODULE_AUTHOR("Gražvydas Ignotas");
+MODULE_DESCRIPTION("TWL4030 Battery Charger Interface driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:twl4030_bci");
diff --git a/drivers/power/supply/twl4030_madc_battery.c b/drivers/power/supply/twl4030_madc_battery.c
new file mode 100644
index 000000000..48649dcfe
--- /dev/null
+++ b/drivers/power/supply/twl4030_madc_battery.c
@@ -0,0 +1,278 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Dumb driver for LiIon batteries using TWL4030 madc.
+ *
+ * Copyright 2013 Golden Delicious Computers
+ * Lukas Märdian <lukas@goldelico.com>
+ *
+ * Based on dumb driver for gta01 battery
+ * Copyright 2009 Openmoko, Inc
+ * Balaji Rao <balajirrao@openmoko.org>
+ */
+
+#include <linux/module.h>
+#include <linux/param.h>
+#include <linux/delay.h>
+#include <linux/workqueue.h>
+#include <linux/platform_device.h>
+#include <linux/power_supply.h>
+#include <linux/slab.h>
+#include <linux/sort.h>
+#include <linux/power/twl4030_madc_battery.h>
+#include <linux/iio/consumer.h>
+
+struct twl4030_madc_battery {
+ struct power_supply *psy;
+ struct twl4030_madc_bat_platform_data *pdata;
+ struct iio_channel *channel_temp;
+ struct iio_channel *channel_ichg;
+ struct iio_channel *channel_vbat;
+};
+
+static enum power_supply_property twl4030_madc_bat_props[] = {
+ POWER_SUPPLY_PROP_PRESENT,
+ POWER_SUPPLY_PROP_STATUS,
+ POWER_SUPPLY_PROP_TECHNOLOGY,
+ POWER_SUPPLY_PROP_VOLTAGE_NOW,
+ POWER_SUPPLY_PROP_CURRENT_NOW,
+ POWER_SUPPLY_PROP_CAPACITY,
+ POWER_SUPPLY_PROP_CHARGE_FULL,
+ POWER_SUPPLY_PROP_CHARGE_NOW,
+ POWER_SUPPLY_PROP_TEMP,
+ POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW,
+};
+
+static int madc_read(struct iio_channel *channel)
+{
+ int val, err;
+ err = iio_read_channel_processed(channel, &val);
+ if (err < 0)
+ return err;
+
+ return val;
+}
+
+static int twl4030_madc_bat_get_charging_status(struct twl4030_madc_battery *bt)
+{
+ return (madc_read(bt->channel_ichg) > 0) ? 1 : 0;
+}
+
+static int twl4030_madc_bat_get_voltage(struct twl4030_madc_battery *bt)
+{
+ return madc_read(bt->channel_vbat);
+}
+
+static int twl4030_madc_bat_get_current(struct twl4030_madc_battery *bt)
+{
+ return madc_read(bt->channel_ichg) * 1000;
+}
+
+static int twl4030_madc_bat_get_temp(struct twl4030_madc_battery *bt)
+{
+ return madc_read(bt->channel_temp) * 10;
+}
+
+static int twl4030_madc_bat_voltscale(struct twl4030_madc_battery *bat,
+ int volt)
+{
+ struct twl4030_madc_bat_calibration *calibration;
+ int i, res = 0;
+
+ /* choose charging curve */
+ if (twl4030_madc_bat_get_charging_status(bat))
+ calibration = bat->pdata->charging;
+ else
+ calibration = bat->pdata->discharging;
+
+ if (volt > calibration[0].voltage) {
+ res = calibration[0].level;
+ } else {
+ for (i = 0; calibration[i+1].voltage >= 0; i++) {
+ if (volt <= calibration[i].voltage &&
+ volt >= calibration[i+1].voltage) {
+ /* interval found - interpolate within range */
+ res = calibration[i].level -
+ ((calibration[i].voltage - volt) *
+ (calibration[i].level -
+ calibration[i+1].level)) /
+ (calibration[i].voltage -
+ calibration[i+1].voltage);
+ break;
+ }
+ }
+ }
+ return res;
+}
+
+static int twl4030_madc_bat_get_property(struct power_supply *psy,
+ enum power_supply_property psp,
+ union power_supply_propval *val)
+{
+ struct twl4030_madc_battery *bat = power_supply_get_drvdata(psy);
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_STATUS:
+ if (twl4030_madc_bat_voltscale(bat,
+ twl4030_madc_bat_get_voltage(bat)) > 95)
+ val->intval = POWER_SUPPLY_STATUS_FULL;
+ else {
+ if (twl4030_madc_bat_get_charging_status(bat))
+ val->intval = POWER_SUPPLY_STATUS_CHARGING;
+ else
+ val->intval = POWER_SUPPLY_STATUS_DISCHARGING;
+ }
+ break;
+ case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+ val->intval = twl4030_madc_bat_get_voltage(bat) * 1000;
+ break;
+ case POWER_SUPPLY_PROP_TECHNOLOGY:
+ val->intval = POWER_SUPPLY_TECHNOLOGY_LION;
+ break;
+ case POWER_SUPPLY_PROP_CURRENT_NOW:
+ val->intval = twl4030_madc_bat_get_current(bat);
+ break;
+ case POWER_SUPPLY_PROP_PRESENT:
+ /* assume battery is always present */
+ val->intval = 1;
+ break;
+ case POWER_SUPPLY_PROP_CHARGE_NOW: {
+ int percent = twl4030_madc_bat_voltscale(bat,
+ twl4030_madc_bat_get_voltage(bat));
+ val->intval = (percent * bat->pdata->capacity) / 100;
+ break;
+ }
+ case POWER_SUPPLY_PROP_CAPACITY:
+ val->intval = twl4030_madc_bat_voltscale(bat,
+ twl4030_madc_bat_get_voltage(bat));
+ break;
+ case POWER_SUPPLY_PROP_CHARGE_FULL:
+ val->intval = bat->pdata->capacity;
+ break;
+ case POWER_SUPPLY_PROP_TEMP:
+ val->intval = twl4030_madc_bat_get_temp(bat);
+ break;
+ case POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW: {
+ int percent = twl4030_madc_bat_voltscale(bat,
+ twl4030_madc_bat_get_voltage(bat));
+ /* in mAh */
+ int chg = (percent * (bat->pdata->capacity/1000))/100;
+
+ /* assume discharge with 400 mA (ca. 1.5W) */
+ val->intval = (3600l * chg) / 400;
+ break;
+ }
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static void twl4030_madc_bat_ext_changed(struct power_supply *psy)
+{
+ power_supply_changed(psy);
+}
+
+static const struct power_supply_desc twl4030_madc_bat_desc = {
+ .name = "twl4030_battery",
+ .type = POWER_SUPPLY_TYPE_BATTERY,
+ .properties = twl4030_madc_bat_props,
+ .num_properties = ARRAY_SIZE(twl4030_madc_bat_props),
+ .get_property = twl4030_madc_bat_get_property,
+ .external_power_changed = twl4030_madc_bat_ext_changed,
+
+};
+
+static int twl4030_cmp(const void *a, const void *b)
+{
+ return ((struct twl4030_madc_bat_calibration *)b)->voltage -
+ ((struct twl4030_madc_bat_calibration *)a)->voltage;
+}
+
+static int twl4030_madc_battery_probe(struct platform_device *pdev)
+{
+ struct twl4030_madc_battery *twl4030_madc_bat;
+ struct twl4030_madc_bat_platform_data *pdata = pdev->dev.platform_data;
+ struct power_supply_config psy_cfg = {};
+ int ret = 0;
+
+ twl4030_madc_bat = devm_kzalloc(&pdev->dev, sizeof(*twl4030_madc_bat),
+ GFP_KERNEL);
+ if (!twl4030_madc_bat)
+ return -ENOMEM;
+
+ twl4030_madc_bat->channel_temp = iio_channel_get(&pdev->dev, "temp");
+ if (IS_ERR(twl4030_madc_bat->channel_temp)) {
+ ret = PTR_ERR(twl4030_madc_bat->channel_temp);
+ goto err;
+ }
+
+ twl4030_madc_bat->channel_ichg = iio_channel_get(&pdev->dev, "ichg");
+ if (IS_ERR(twl4030_madc_bat->channel_ichg)) {
+ ret = PTR_ERR(twl4030_madc_bat->channel_ichg);
+ goto err_temp;
+ }
+
+ twl4030_madc_bat->channel_vbat = iio_channel_get(&pdev->dev, "vbat");
+ if (IS_ERR(twl4030_madc_bat->channel_vbat)) {
+ ret = PTR_ERR(twl4030_madc_bat->channel_vbat);
+ goto err_ichg;
+ }
+
+ /* sort charging and discharging calibration data */
+ sort(pdata->charging, pdata->charging_size,
+ sizeof(struct twl4030_madc_bat_calibration),
+ twl4030_cmp, NULL);
+ sort(pdata->discharging, pdata->discharging_size,
+ sizeof(struct twl4030_madc_bat_calibration),
+ twl4030_cmp, NULL);
+
+ twl4030_madc_bat->pdata = pdata;
+ platform_set_drvdata(pdev, twl4030_madc_bat);
+ psy_cfg.drv_data = twl4030_madc_bat;
+ twl4030_madc_bat->psy = power_supply_register(&pdev->dev,
+ &twl4030_madc_bat_desc,
+ &psy_cfg);
+ if (IS_ERR(twl4030_madc_bat->psy)) {
+ ret = PTR_ERR(twl4030_madc_bat->psy);
+ goto err_vbat;
+ }
+
+ return 0;
+
+err_vbat:
+ iio_channel_release(twl4030_madc_bat->channel_vbat);
+err_ichg:
+ iio_channel_release(twl4030_madc_bat->channel_ichg);
+err_temp:
+ iio_channel_release(twl4030_madc_bat->channel_temp);
+err:
+ return ret;
+}
+
+static int twl4030_madc_battery_remove(struct platform_device *pdev)
+{
+ struct twl4030_madc_battery *bat = platform_get_drvdata(pdev);
+
+ power_supply_unregister(bat->psy);
+
+ iio_channel_release(bat->channel_vbat);
+ iio_channel_release(bat->channel_ichg);
+ iio_channel_release(bat->channel_temp);
+
+ return 0;
+}
+
+static struct platform_driver twl4030_madc_battery_driver = {
+ .driver = {
+ .name = "twl4030_madc_battery",
+ },
+ .probe = twl4030_madc_battery_probe,
+ .remove = twl4030_madc_battery_remove,
+};
+module_platform_driver(twl4030_madc_battery_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Lukas Märdian <lukas@goldelico.com>");
+MODULE_DESCRIPTION("twl4030_madc battery driver");
+MODULE_ALIAS("platform:twl4030_madc_battery");
diff --git a/drivers/power/supply/ucs1002_power.c b/drivers/power/supply/ucs1002_power.c
new file mode 100644
index 000000000..332cb50d9
--- /dev/null
+++ b/drivers/power/supply/ucs1002_power.c
@@ -0,0 +1,692 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Driver for UCS1002 Programmable USB Port Power Controller
+ *
+ * Copyright (C) 2019 Zodiac Inflight Innovations
+ */
+#include <linux/bits.h>
+#include <linux/freezer.h>
+#include <linux/gpio/consumer.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/kthread.h>
+#include <linux/device.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_irq.h>
+#include <linux/power_supply.h>
+#include <linux/regmap.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/of_regulator.h>
+
+/* UCS1002 Registers */
+#define UCS1002_REG_CURRENT_MEASUREMENT 0x00
+
+/*
+ * The Total Accumulated Charge registers store the total accumulated
+ * charge delivered from the VS source to a portable device. The total
+ * value is calculated using four registers, from 01h to 04h. The bit
+ * weighting of the registers is given in mA/hrs.
+ */
+#define UCS1002_REG_TOTAL_ACC_CHARGE 0x01
+
+/* Other Status Register */
+#define UCS1002_REG_OTHER_STATUS 0x0f
+# define F_ADET_PIN BIT(4)
+# define F_CHG_ACT BIT(3)
+
+/* Interrupt Status */
+#define UCS1002_REG_INTERRUPT_STATUS 0x10
+# define F_ERR BIT(7)
+# define F_DISCHARGE_ERR BIT(6)
+# define F_RESET BIT(5)
+# define F_MIN_KEEP_OUT BIT(4)
+# define F_TSD BIT(3)
+# define F_OVER_VOLT BIT(2)
+# define F_BACK_VOLT BIT(1)
+# define F_OVER_ILIM BIT(0)
+
+/* Pin Status Register */
+#define UCS1002_REG_PIN_STATUS 0x14
+# define UCS1002_PWR_STATE_MASK 0x03
+# define F_PWR_EN_PIN BIT(6)
+# define F_M2_PIN BIT(5)
+# define F_M1_PIN BIT(4)
+# define F_EM_EN_PIN BIT(3)
+# define F_SEL_PIN BIT(2)
+# define F_ACTIVE_MODE_MASK GENMASK(5, 3)
+# define F_ACTIVE_MODE_PASSTHROUGH F_M2_PIN
+# define F_ACTIVE_MODE_DEDICATED F_EM_EN_PIN
+# define F_ACTIVE_MODE_BC12_DCP (F_M2_PIN | F_EM_EN_PIN)
+# define F_ACTIVE_MODE_BC12_SDP F_M1_PIN
+# define F_ACTIVE_MODE_BC12_CDP (F_M1_PIN | F_M2_PIN | F_EM_EN_PIN)
+
+/* General Configuration Register */
+#define UCS1002_REG_GENERAL_CFG 0x15
+# define F_RATION_EN BIT(3)
+
+/* Emulation Configuration Register */
+#define UCS1002_REG_EMU_CFG 0x16
+
+/* Switch Configuration Register */
+#define UCS1002_REG_SWITCH_CFG 0x17
+# define F_PIN_IGNORE BIT(7)
+# define F_EM_EN_SET BIT(5)
+# define F_M2_SET BIT(4)
+# define F_M1_SET BIT(3)
+# define F_S0_SET BIT(2)
+# define F_PWR_EN_SET BIT(1)
+# define F_LATCH_SET BIT(0)
+# define V_SET_ACTIVE_MODE_MASK GENMASK(5, 3)
+# define V_SET_ACTIVE_MODE_PASSTHROUGH F_M2_SET
+# define V_SET_ACTIVE_MODE_DEDICATED F_EM_EN_SET
+# define V_SET_ACTIVE_MODE_BC12_DCP (F_M2_SET | F_EM_EN_SET)
+# define V_SET_ACTIVE_MODE_BC12_SDP F_M1_SET
+# define V_SET_ACTIVE_MODE_BC12_CDP (F_M1_SET | F_M2_SET | F_EM_EN_SET)
+
+/* Current Limit Register */
+#define UCS1002_REG_ILIMIT 0x19
+# define UCS1002_ILIM_SW_MASK GENMASK(3, 0)
+
+/* Product ID */
+#define UCS1002_REG_PRODUCT_ID 0xfd
+# define UCS1002_PRODUCT_ID 0x4e
+
+/* Manufacture name */
+#define UCS1002_MANUFACTURER "SMSC"
+
+struct ucs1002_info {
+ struct power_supply *charger;
+ struct i2c_client *client;
+ struct regmap *regmap;
+ struct regulator_desc *regulator_descriptor;
+ struct regulator_dev *rdev;
+ bool present;
+ bool output_disable;
+ struct delayed_work health_poll;
+ int health;
+
+};
+
+static enum power_supply_property ucs1002_props[] = {
+ POWER_SUPPLY_PROP_ONLINE,
+ POWER_SUPPLY_PROP_CHARGE_NOW,
+ POWER_SUPPLY_PROP_CURRENT_NOW,
+ POWER_SUPPLY_PROP_CURRENT_MAX,
+ POWER_SUPPLY_PROP_PRESENT, /* the presence of PED */
+ POWER_SUPPLY_PROP_MANUFACTURER,
+ POWER_SUPPLY_PROP_USB_TYPE,
+ POWER_SUPPLY_PROP_HEALTH,
+};
+
+static int ucs1002_get_online(struct ucs1002_info *info,
+ union power_supply_propval *val)
+{
+ unsigned int reg;
+ int ret;
+
+ ret = regmap_read(info->regmap, UCS1002_REG_OTHER_STATUS, &reg);
+ if (ret)
+ return ret;
+
+ val->intval = !!(reg & F_CHG_ACT);
+
+ return 0;
+}
+
+static int ucs1002_get_charge(struct ucs1002_info *info,
+ union power_supply_propval *val)
+{
+ /*
+ * To fit within 32 bits some values are rounded (uA/h)
+ *
+ * For Total Accumulated Charge Middle Low Byte register, addr
+ * 03h, byte 2
+ *
+ * B0: 0.01084 mA/h rounded to 11 uA/h
+ * B1: 0.02169 mA/h rounded to 22 uA/h
+ * B2: 0.04340 mA/h rounded to 43 uA/h
+ * B3: 0.08676 mA/h rounded to 87 uA/h
+ * B4: 0.17350 mA/h rounded to 173 uÁ/h
+ *
+ * For Total Accumulated Charge Low Byte register, addr 04h,
+ * byte 3
+ *
+ * B6: 0.00271 mA/h rounded to 3 uA/h
+ * B7: 0.005422 mA/h rounded to 5 uA/h
+ */
+ static const int bit_weights_uAh[BITS_PER_TYPE(u32)] = {
+ /*
+ * Bit corresponding to low byte (offset 0x04)
+ * B0 B1 B2 B3 B4 B5 B6 B7
+ */
+ 0, 0, 0, 0, 0, 0, 3, 5,
+ /*
+ * Bit corresponding to middle low byte (offset 0x03)
+ * B0 B1 B2 B3 B4 B5 B6 B7
+ */
+ 11, 22, 43, 87, 173, 347, 694, 1388,
+ /*
+ * Bit corresponding to middle high byte (offset 0x02)
+ * B0 B1 B2 B3 B4 B5 B6 B7
+ */
+ 2776, 5552, 11105, 22210, 44420, 88840, 177700, 355400,
+ /*
+ * Bit corresponding to high byte (offset 0x01)
+ * B0 B1 B2 B3 B4 B5 B6 B7
+ */
+ 710700, 1421000, 2843000, 5685000, 11371000, 22742000,
+ 45484000, 90968000,
+ };
+ unsigned long total_acc_charger;
+ unsigned int reg;
+ int i, ret;
+
+ ret = regmap_bulk_read(info->regmap, UCS1002_REG_TOTAL_ACC_CHARGE,
+ &reg, sizeof(u32));
+ if (ret)
+ return ret;
+
+ total_acc_charger = be32_to_cpu(reg); /* BE as per offsets above */
+ val->intval = 0;
+
+ for_each_set_bit(i, &total_acc_charger, ARRAY_SIZE(bit_weights_uAh))
+ val->intval += bit_weights_uAh[i];
+
+ return 0;
+}
+
+static int ucs1002_get_current(struct ucs1002_info *info,
+ union power_supply_propval *val)
+{
+ /*
+ * The Current Measurement register stores the measured
+ * current value delivered to the portable device. The range
+ * is from 9.76 mA to 2.5 A.
+ */
+ static const int bit_weights_uA[BITS_PER_TYPE(u8)] = {
+ 9760, 19500, 39000, 78100, 156200, 312300, 624600, 1249300,
+ };
+ unsigned long current_measurement;
+ unsigned int reg;
+ int i, ret;
+
+ ret = regmap_read(info->regmap, UCS1002_REG_CURRENT_MEASUREMENT, &reg);
+ if (ret)
+ return ret;
+
+ current_measurement = reg;
+ val->intval = 0;
+
+ for_each_set_bit(i, &current_measurement, ARRAY_SIZE(bit_weights_uA))
+ val->intval += bit_weights_uA[i];
+
+ return 0;
+}
+
+/*
+ * The Current Limit register stores the maximum current used by the
+ * port switch. The range is from 500mA to 2.5 A.
+ */
+static const u32 ucs1002_current_limit_uA[] = {
+ 500000, 900000, 1000000, 1200000, 1500000, 1800000, 2000000, 2500000,
+};
+
+static int ucs1002_get_max_current(struct ucs1002_info *info,
+ union power_supply_propval *val)
+{
+ unsigned int reg;
+ int ret;
+
+ if (info->output_disable) {
+ val->intval = 0;
+ return 0;
+ }
+
+ ret = regmap_read(info->regmap, UCS1002_REG_ILIMIT, &reg);
+ if (ret)
+ return ret;
+
+ val->intval = ucs1002_current_limit_uA[reg & UCS1002_ILIM_SW_MASK];
+
+ return 0;
+}
+
+static int ucs1002_set_max_current(struct ucs1002_info *info, u32 val)
+{
+ unsigned int reg;
+ int ret, idx;
+
+ if (val == 0) {
+ info->output_disable = true;
+ regulator_disable_regmap(info->rdev);
+ return 0;
+ }
+
+ for (idx = 0; idx < ARRAY_SIZE(ucs1002_current_limit_uA); idx++) {
+ if (val == ucs1002_current_limit_uA[idx])
+ break;
+ }
+
+ if (idx == ARRAY_SIZE(ucs1002_current_limit_uA))
+ return -EINVAL;
+
+ ret = regmap_write(info->regmap, UCS1002_REG_ILIMIT, idx);
+ if (ret)
+ return ret;
+ /*
+ * Any current limit setting exceeding the one set via ILIM
+ * pin will be rejected, so we read out freshly changed limit
+ * to make sure that it took effect.
+ */
+ ret = regmap_read(info->regmap, UCS1002_REG_ILIMIT, &reg);
+ if (ret)
+ return ret;
+
+ if (reg != idx)
+ return -EINVAL;
+
+ info->output_disable = false;
+
+ if (info->rdev && info->rdev->use_count &&
+ !regulator_is_enabled_regmap(info->rdev))
+ regulator_enable_regmap(info->rdev);
+
+ return 0;
+}
+
+static enum power_supply_usb_type ucs1002_usb_types[] = {
+ POWER_SUPPLY_USB_TYPE_PD,
+ POWER_SUPPLY_USB_TYPE_SDP,
+ POWER_SUPPLY_USB_TYPE_DCP,
+ POWER_SUPPLY_USB_TYPE_CDP,
+ POWER_SUPPLY_USB_TYPE_UNKNOWN,
+};
+
+static int ucs1002_set_usb_type(struct ucs1002_info *info, int val)
+{
+ unsigned int mode;
+
+ if (val < 0 || val >= ARRAY_SIZE(ucs1002_usb_types))
+ return -EINVAL;
+
+ switch (ucs1002_usb_types[val]) {
+ case POWER_SUPPLY_USB_TYPE_PD:
+ mode = V_SET_ACTIVE_MODE_DEDICATED;
+ break;
+ case POWER_SUPPLY_USB_TYPE_SDP:
+ mode = V_SET_ACTIVE_MODE_BC12_SDP;
+ break;
+ case POWER_SUPPLY_USB_TYPE_DCP:
+ mode = V_SET_ACTIVE_MODE_BC12_DCP;
+ break;
+ case POWER_SUPPLY_USB_TYPE_CDP:
+ mode = V_SET_ACTIVE_MODE_BC12_CDP;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return regmap_update_bits(info->regmap, UCS1002_REG_SWITCH_CFG,
+ V_SET_ACTIVE_MODE_MASK, mode);
+}
+
+static int ucs1002_get_usb_type(struct ucs1002_info *info,
+ union power_supply_propval *val)
+{
+ enum power_supply_usb_type type;
+ unsigned int reg;
+ int ret;
+
+ ret = regmap_read(info->regmap, UCS1002_REG_PIN_STATUS, &reg);
+ if (ret)
+ return ret;
+
+ switch (reg & F_ACTIVE_MODE_MASK) {
+ default:
+ type = POWER_SUPPLY_USB_TYPE_UNKNOWN;
+ break;
+ case F_ACTIVE_MODE_DEDICATED:
+ type = POWER_SUPPLY_USB_TYPE_PD;
+ break;
+ case F_ACTIVE_MODE_BC12_SDP:
+ type = POWER_SUPPLY_USB_TYPE_SDP;
+ break;
+ case F_ACTIVE_MODE_BC12_DCP:
+ type = POWER_SUPPLY_USB_TYPE_DCP;
+ break;
+ case F_ACTIVE_MODE_BC12_CDP:
+ type = POWER_SUPPLY_USB_TYPE_CDP;
+ break;
+ }
+
+ val->intval = type;
+
+ return 0;
+}
+
+static int ucs1002_get_property(struct power_supply *psy,
+ enum power_supply_property psp,
+ union power_supply_propval *val)
+{
+ struct ucs1002_info *info = power_supply_get_drvdata(psy);
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_ONLINE:
+ return ucs1002_get_online(info, val);
+ case POWER_SUPPLY_PROP_CHARGE_NOW:
+ return ucs1002_get_charge(info, val);
+ case POWER_SUPPLY_PROP_CURRENT_NOW:
+ return ucs1002_get_current(info, val);
+ case POWER_SUPPLY_PROP_CURRENT_MAX:
+ return ucs1002_get_max_current(info, val);
+ case POWER_SUPPLY_PROP_USB_TYPE:
+ return ucs1002_get_usb_type(info, val);
+ case POWER_SUPPLY_PROP_HEALTH:
+ val->intval = info->health;
+ return 0;
+ case POWER_SUPPLY_PROP_PRESENT:
+ val->intval = info->present;
+ return 0;
+ case POWER_SUPPLY_PROP_MANUFACTURER:
+ val->strval = UCS1002_MANUFACTURER;
+ return 0;
+ default:
+ return -EINVAL;
+ }
+}
+
+static int ucs1002_set_property(struct power_supply *psy,
+ enum power_supply_property psp,
+ const union power_supply_propval *val)
+{
+ struct ucs1002_info *info = power_supply_get_drvdata(psy);
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_CURRENT_MAX:
+ return ucs1002_set_max_current(info, val->intval);
+ case POWER_SUPPLY_PROP_USB_TYPE:
+ return ucs1002_set_usb_type(info, val->intval);
+ default:
+ return -EINVAL;
+ }
+}
+
+static int ucs1002_property_is_writeable(struct power_supply *psy,
+ enum power_supply_property psp)
+{
+ switch (psp) {
+ case POWER_SUPPLY_PROP_CURRENT_MAX:
+ case POWER_SUPPLY_PROP_USB_TYPE:
+ return true;
+ default:
+ return false;
+ }
+}
+
+static const struct power_supply_desc ucs1002_charger_desc = {
+ .name = "ucs1002",
+ .type = POWER_SUPPLY_TYPE_USB,
+ .usb_types = ucs1002_usb_types,
+ .num_usb_types = ARRAY_SIZE(ucs1002_usb_types),
+ .get_property = ucs1002_get_property,
+ .set_property = ucs1002_set_property,
+ .property_is_writeable = ucs1002_property_is_writeable,
+ .properties = ucs1002_props,
+ .num_properties = ARRAY_SIZE(ucs1002_props),
+};
+
+static void ucs1002_health_poll(struct work_struct *work)
+{
+ struct ucs1002_info *info = container_of(work, struct ucs1002_info,
+ health_poll.work);
+ int ret;
+ u32 reg;
+
+ ret = regmap_read(info->regmap, UCS1002_REG_INTERRUPT_STATUS, &reg);
+ if (ret)
+ return;
+
+ /* bad health and no status change, just schedule us again in a while */
+ if ((reg & F_ERR) && info->health != POWER_SUPPLY_HEALTH_GOOD) {
+ schedule_delayed_work(&info->health_poll,
+ msecs_to_jiffies(2000));
+ return;
+ }
+
+ if (reg & F_TSD)
+ info->health = POWER_SUPPLY_HEALTH_OVERHEAT;
+ else if (reg & (F_OVER_VOLT | F_BACK_VOLT))
+ info->health = POWER_SUPPLY_HEALTH_OVERVOLTAGE;
+ else if (reg & F_OVER_ILIM)
+ info->health = POWER_SUPPLY_HEALTH_OVERCURRENT;
+ else if (reg & (F_DISCHARGE_ERR | F_MIN_KEEP_OUT))
+ info->health = POWER_SUPPLY_HEALTH_UNSPEC_FAILURE;
+ else
+ info->health = POWER_SUPPLY_HEALTH_GOOD;
+
+ sysfs_notify(&info->charger->dev.kobj, NULL, "health");
+}
+
+static irqreturn_t ucs1002_charger_irq(int irq, void *data)
+{
+ int ret, regval;
+ bool present;
+ struct ucs1002_info *info = data;
+
+ present = info->present;
+
+ ret = regmap_read(info->regmap, UCS1002_REG_OTHER_STATUS, &regval);
+ if (ret)
+ return IRQ_HANDLED;
+
+ /* update attached status */
+ info->present = regval & F_ADET_PIN;
+
+ /* notify the change */
+ if (present != info->present)
+ power_supply_changed(info->charger);
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t ucs1002_alert_irq(int irq, void *data)
+{
+ struct ucs1002_info *info = data;
+
+ mod_delayed_work(system_wq, &info->health_poll, 0);
+
+ return IRQ_HANDLED;
+}
+
+static int ucs1002_regulator_enable(struct regulator_dev *rdev)
+{
+ struct ucs1002_info *info = rdev_get_drvdata(rdev);
+
+ /*
+ * If the output is disabled due to 0 maximum current, just pretend the
+ * enable did work. The regulator will be enabled as soon as we get a
+ * a non-zero maximum current budget.
+ */
+ if (info->output_disable)
+ return 0;
+
+ return regulator_enable_regmap(rdev);
+}
+
+static const struct regulator_ops ucs1002_regulator_ops = {
+ .is_enabled = regulator_is_enabled_regmap,
+ .enable = ucs1002_regulator_enable,
+ .disable = regulator_disable_regmap,
+};
+
+static const struct regulator_desc ucs1002_regulator_descriptor = {
+ .name = "ucs1002-vbus",
+ .ops = &ucs1002_regulator_ops,
+ .type = REGULATOR_VOLTAGE,
+ .owner = THIS_MODULE,
+ .enable_reg = UCS1002_REG_SWITCH_CFG,
+ .enable_mask = F_PWR_EN_SET,
+ .enable_val = F_PWR_EN_SET,
+ .fixed_uV = 5000000,
+ .n_voltages = 1,
+};
+
+static int ucs1002_probe(struct i2c_client *client,
+ const struct i2c_device_id *dev_id)
+{
+ struct device *dev = &client->dev;
+ struct power_supply_config charger_config = {};
+ const struct regmap_config regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+ };
+ struct regulator_config regulator_config = {};
+ int irq_a_det, irq_alert, ret;
+ struct ucs1002_info *info;
+ unsigned int regval;
+
+ info = devm_kzalloc(dev, sizeof(*info), GFP_KERNEL);
+ if (!info)
+ return -ENOMEM;
+
+ info->regmap = devm_regmap_init_i2c(client, &regmap_config);
+ ret = PTR_ERR_OR_ZERO(info->regmap);
+ if (ret) {
+ dev_err(dev, "Regmap initialization failed: %d\n", ret);
+ return ret;
+ }
+
+ info->client = client;
+
+ irq_a_det = of_irq_get_byname(dev->of_node, "a_det");
+ irq_alert = of_irq_get_byname(dev->of_node, "alert");
+
+ charger_config.of_node = dev->of_node;
+ charger_config.drv_data = info;
+
+ ret = regmap_read(info->regmap, UCS1002_REG_PRODUCT_ID, &regval);
+ if (ret) {
+ dev_err(dev, "Failed to read product ID: %d\n", ret);
+ return ret;
+ }
+
+ if (regval != UCS1002_PRODUCT_ID) {
+ dev_err(dev,
+ "Product ID does not match (0x%02x != 0x%02x)\n",
+ regval, UCS1002_PRODUCT_ID);
+ return -ENODEV;
+ }
+
+ /* Enable charge rationing by default */
+ ret = regmap_update_bits(info->regmap, UCS1002_REG_GENERAL_CFG,
+ F_RATION_EN, F_RATION_EN);
+ if (ret) {
+ dev_err(dev, "Failed to read general config: %d\n", ret);
+ return ret;
+ }
+
+ /*
+ * Ignore the M1, M2, PWR_EN, and EM_EN pin states. Set active
+ * mode selection to BC1.2 CDP.
+ */
+ ret = regmap_update_bits(info->regmap, UCS1002_REG_SWITCH_CFG,
+ V_SET_ACTIVE_MODE_MASK | F_PIN_IGNORE,
+ V_SET_ACTIVE_MODE_BC12_CDP | F_PIN_IGNORE);
+ if (ret) {
+ dev_err(dev, "Failed to configure default mode: %d\n", ret);
+ return ret;
+ }
+ /*
+ * Be safe and set initial current limit to 500mA
+ */
+ ret = ucs1002_set_max_current(info, 500000);
+ if (ret) {
+ dev_err(dev, "Failed to set max current default: %d\n", ret);
+ return ret;
+ }
+
+ info->charger = devm_power_supply_register(dev, &ucs1002_charger_desc,
+ &charger_config);
+ ret = PTR_ERR_OR_ZERO(info->charger);
+ if (ret) {
+ dev_err(dev, "Failed to register power supply: %d\n", ret);
+ return ret;
+ }
+
+ ret = regmap_read(info->regmap, UCS1002_REG_PIN_STATUS, &regval);
+ if (ret) {
+ dev_err(dev, "Failed to read pin status: %d\n", ret);
+ return ret;
+ }
+
+ info->regulator_descriptor =
+ devm_kmemdup(dev, &ucs1002_regulator_descriptor,
+ sizeof(ucs1002_regulator_descriptor),
+ GFP_KERNEL);
+ if (!info->regulator_descriptor)
+ return -ENOMEM;
+
+ info->regulator_descriptor->enable_is_inverted = !(regval & F_SEL_PIN);
+
+ regulator_config.dev = dev;
+ regulator_config.of_node = dev->of_node;
+ regulator_config.regmap = info->regmap;
+ regulator_config.driver_data = info;
+
+ info->rdev = devm_regulator_register(dev, info->regulator_descriptor,
+ &regulator_config);
+ ret = PTR_ERR_OR_ZERO(info->rdev);
+ if (ret) {
+ dev_err(dev, "Failed to register VBUS regulator: %d\n", ret);
+ return ret;
+ }
+
+ info->health = POWER_SUPPLY_HEALTH_GOOD;
+ INIT_DELAYED_WORK(&info->health_poll, ucs1002_health_poll);
+
+ if (irq_a_det > 0) {
+ ret = devm_request_threaded_irq(dev, irq_a_det, NULL,
+ ucs1002_charger_irq,
+ IRQF_ONESHOT,
+ "ucs1002-a_det", info);
+ if (ret) {
+ dev_err(dev, "Failed to request A_DET threaded irq: %d\n",
+ ret);
+ return ret;
+ }
+ }
+
+ if (irq_alert > 0) {
+ ret = devm_request_irq(dev, irq_alert, ucs1002_alert_irq,
+ 0,"ucs1002-alert", info);
+ if (ret) {
+ dev_err(dev, "Failed to request ALERT threaded irq: %d\n",
+ ret);
+ return ret;
+ }
+ }
+
+ return 0;
+}
+
+static const struct of_device_id ucs1002_of_match[] = {
+ { .compatible = "microchip,ucs1002", },
+ { /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, ucs1002_of_match);
+
+static struct i2c_driver ucs1002_driver = {
+ .driver = {
+ .name = "ucs1002",
+ .of_match_table = ucs1002_of_match,
+ },
+ .probe = ucs1002_probe,
+};
+module_i2c_driver(ucs1002_driver);
+
+MODULE_DESCRIPTION("Microchip UCS1002 Programmable USB Port Power Controller");
+MODULE_AUTHOR("Enric Balletbo Serra <enric.balletbo@collabora.com>");
+MODULE_AUTHOR("Andrey Smirnov <andrew.smirnov@gmail.com>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/power/supply/wilco-charger.c b/drivers/power/supply/wilco-charger.c
new file mode 100644
index 000000000..98ade073e
--- /dev/null
+++ b/drivers/power/supply/wilco-charger.c
@@ -0,0 +1,192 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Charging control driver for the Wilco EC
+ *
+ * Copyright 2019 Google LLC
+ *
+ * See Documentation/ABI/testing/sysfs-class-power and
+ * Documentation/ABI/testing/sysfs-class-power-wilco for userspace interface
+ * and other info.
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/platform_data/wilco-ec.h>
+#include <linux/power_supply.h>
+
+#define DRV_NAME "wilco-charger"
+
+/* Property IDs and related EC constants */
+#define PID_CHARGE_MODE 0x0710
+#define PID_CHARGE_LOWER_LIMIT 0x0711
+#define PID_CHARGE_UPPER_LIMIT 0x0712
+
+enum charge_mode {
+ CHARGE_MODE_STD = 1, /* Used for Standard */
+ CHARGE_MODE_EXP = 2, /* Express Charge, used for Fast */
+ CHARGE_MODE_AC = 3, /* Mostly AC use, used for Trickle */
+ CHARGE_MODE_AUTO = 4, /* Used for Adaptive */
+ CHARGE_MODE_CUSTOM = 5, /* Used for Custom */
+ CHARGE_MODE_LONGLIFE = 6, /* Used for Long Life */
+};
+
+#define CHARGE_LOWER_LIMIT_MIN 50
+#define CHARGE_LOWER_LIMIT_MAX 95
+#define CHARGE_UPPER_LIMIT_MIN 55
+#define CHARGE_UPPER_LIMIT_MAX 100
+
+/* Convert from POWER_SUPPLY_PROP_CHARGE_TYPE value to the EC's charge mode */
+static int psp_val_to_charge_mode(int psp_val)
+{
+ switch (psp_val) {
+ case POWER_SUPPLY_CHARGE_TYPE_TRICKLE:
+ return CHARGE_MODE_AC;
+ case POWER_SUPPLY_CHARGE_TYPE_FAST:
+ return CHARGE_MODE_EXP;
+ case POWER_SUPPLY_CHARGE_TYPE_STANDARD:
+ return CHARGE_MODE_STD;
+ case POWER_SUPPLY_CHARGE_TYPE_ADAPTIVE:
+ return CHARGE_MODE_AUTO;
+ case POWER_SUPPLY_CHARGE_TYPE_CUSTOM:
+ return CHARGE_MODE_CUSTOM;
+ case POWER_SUPPLY_CHARGE_TYPE_LONGLIFE:
+ return CHARGE_MODE_LONGLIFE;
+ default:
+ return -EINVAL;
+ }
+}
+
+/* Convert from EC's charge mode to POWER_SUPPLY_PROP_CHARGE_TYPE value */
+static int charge_mode_to_psp_val(enum charge_mode mode)
+{
+ switch (mode) {
+ case CHARGE_MODE_AC:
+ return POWER_SUPPLY_CHARGE_TYPE_TRICKLE;
+ case CHARGE_MODE_EXP:
+ return POWER_SUPPLY_CHARGE_TYPE_FAST;
+ case CHARGE_MODE_STD:
+ return POWER_SUPPLY_CHARGE_TYPE_STANDARD;
+ case CHARGE_MODE_AUTO:
+ return POWER_SUPPLY_CHARGE_TYPE_ADAPTIVE;
+ case CHARGE_MODE_CUSTOM:
+ return POWER_SUPPLY_CHARGE_TYPE_CUSTOM;
+ case CHARGE_MODE_LONGLIFE:
+ return POWER_SUPPLY_CHARGE_TYPE_LONGLIFE;
+ default:
+ return -EINVAL;
+ }
+}
+
+static enum power_supply_property wilco_charge_props[] = {
+ POWER_SUPPLY_PROP_CHARGE_TYPE,
+ POWER_SUPPLY_PROP_CHARGE_CONTROL_START_THRESHOLD,
+ POWER_SUPPLY_PROP_CHARGE_CONTROL_END_THRESHOLD,
+};
+
+static int wilco_charge_get_property(struct power_supply *psy,
+ enum power_supply_property psp,
+ union power_supply_propval *val)
+{
+ struct wilco_ec_device *ec = power_supply_get_drvdata(psy);
+ u32 property_id;
+ int ret;
+ u8 raw;
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_CHARGE_TYPE:
+ property_id = PID_CHARGE_MODE;
+ break;
+ case POWER_SUPPLY_PROP_CHARGE_CONTROL_START_THRESHOLD:
+ property_id = PID_CHARGE_LOWER_LIMIT;
+ break;
+ case POWER_SUPPLY_PROP_CHARGE_CONTROL_END_THRESHOLD:
+ property_id = PID_CHARGE_UPPER_LIMIT;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ ret = wilco_ec_get_byte_property(ec, property_id, &raw);
+ if (ret < 0)
+ return ret;
+ if (property_id == PID_CHARGE_MODE) {
+ ret = charge_mode_to_psp_val(raw);
+ if (ret < 0)
+ return -EBADMSG;
+ raw = ret;
+ }
+ val->intval = raw;
+
+ return 0;
+}
+
+static int wilco_charge_set_property(struct power_supply *psy,
+ enum power_supply_property psp,
+ const union power_supply_propval *val)
+{
+ struct wilco_ec_device *ec = power_supply_get_drvdata(psy);
+ int mode;
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_CHARGE_TYPE:
+ mode = psp_val_to_charge_mode(val->intval);
+ if (mode < 0)
+ return -EINVAL;
+ return wilco_ec_set_byte_property(ec, PID_CHARGE_MODE, mode);
+ case POWER_SUPPLY_PROP_CHARGE_CONTROL_START_THRESHOLD:
+ if (val->intval < CHARGE_LOWER_LIMIT_MIN ||
+ val->intval > CHARGE_LOWER_LIMIT_MAX)
+ return -EINVAL;
+ return wilco_ec_set_byte_property(ec, PID_CHARGE_LOWER_LIMIT,
+ val->intval);
+ case POWER_SUPPLY_PROP_CHARGE_CONTROL_END_THRESHOLD:
+ if (val->intval < CHARGE_UPPER_LIMIT_MIN ||
+ val->intval > CHARGE_UPPER_LIMIT_MAX)
+ return -EINVAL;
+ return wilco_ec_set_byte_property(ec, PID_CHARGE_UPPER_LIMIT,
+ val->intval);
+ default:
+ return -EINVAL;
+ }
+}
+
+static int wilco_charge_property_is_writeable(struct power_supply *psy,
+ enum power_supply_property psp)
+{
+ return 1;
+}
+
+static const struct power_supply_desc wilco_ps_desc = {
+ .properties = wilco_charge_props,
+ .num_properties = ARRAY_SIZE(wilco_charge_props),
+ .get_property = wilco_charge_get_property,
+ .set_property = wilco_charge_set_property,
+ .property_is_writeable = wilco_charge_property_is_writeable,
+ .name = DRV_NAME,
+ .type = POWER_SUPPLY_TYPE_MAINS,
+};
+
+static int wilco_charge_probe(struct platform_device *pdev)
+{
+ struct wilco_ec_device *ec = dev_get_drvdata(pdev->dev.parent);
+ struct power_supply_config psy_cfg = {};
+ struct power_supply *psy;
+
+ psy_cfg.drv_data = ec;
+ psy = devm_power_supply_register(&pdev->dev, &wilco_ps_desc, &psy_cfg);
+
+ return PTR_ERR_OR_ZERO(psy);
+}
+
+static struct platform_driver wilco_charge_driver = {
+ .probe = wilco_charge_probe,
+ .driver = {
+ .name = DRV_NAME,
+ }
+};
+module_platform_driver(wilco_charge_driver);
+
+MODULE_ALIAS("platform:" DRV_NAME);
+MODULE_AUTHOR("Nick Crews <ncrews@chromium.org>");
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("Wilco EC charge control driver");
diff --git a/drivers/power/supply/wm831x_backup.c b/drivers/power/supply/wm831x_backup.c
new file mode 100644
index 000000000..ffb265b85
--- /dev/null
+++ b/drivers/power/supply/wm831x_backup.c
@@ -0,0 +1,222 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Backup battery driver for Wolfson Microelectronics wm831x PMICs
+ *
+ * Copyright 2009 Wolfson Microelectronics PLC.
+ */
+
+#include <linux/module.h>
+#include <linux/err.h>
+#include <linux/platform_device.h>
+#include <linux/power_supply.h>
+#include <linux/slab.h>
+
+#include <linux/mfd/wm831x/core.h>
+#include <linux/mfd/wm831x/auxadc.h>
+#include <linux/mfd/wm831x/pmu.h>
+#include <linux/mfd/wm831x/pdata.h>
+
+struct wm831x_backup {
+ struct wm831x *wm831x;
+ struct power_supply *backup;
+ struct power_supply_desc backup_desc;
+ char name[20];
+};
+
+static int wm831x_backup_read_voltage(struct wm831x *wm831x,
+ enum wm831x_auxadc src,
+ union power_supply_propval *val)
+{
+ int ret;
+
+ ret = wm831x_auxadc_read_uv(wm831x, src);
+ if (ret >= 0)
+ val->intval = ret;
+
+ return ret;
+}
+
+/*********************************************************************
+ * Backup supply properties
+ *********************************************************************/
+
+static void wm831x_config_backup(struct wm831x *wm831x)
+{
+ struct wm831x_pdata *wm831x_pdata = wm831x->dev->platform_data;
+ struct wm831x_backup_pdata *pdata;
+ int ret, reg;
+
+ if (!wm831x_pdata || !wm831x_pdata->backup) {
+ dev_warn(wm831x->dev,
+ "No backup battery charger configuration\n");
+ return;
+ }
+
+ pdata = wm831x_pdata->backup;
+
+ reg = 0;
+
+ if (pdata->charger_enable)
+ reg |= WM831X_BKUP_CHG_ENA | WM831X_BKUP_BATT_DET_ENA;
+ if (pdata->no_constant_voltage)
+ reg |= WM831X_BKUP_CHG_MODE;
+
+ switch (pdata->vlim) {
+ case 2500:
+ break;
+ case 3100:
+ reg |= WM831X_BKUP_CHG_VLIM;
+ break;
+ default:
+ dev_err(wm831x->dev, "Invalid backup voltage limit %dmV\n",
+ pdata->vlim);
+ }
+
+ switch (pdata->ilim) {
+ case 100:
+ break;
+ case 200:
+ reg |= 1;
+ break;
+ case 300:
+ reg |= 2;
+ break;
+ case 400:
+ reg |= 3;
+ break;
+ default:
+ dev_err(wm831x->dev, "Invalid backup current limit %duA\n",
+ pdata->ilim);
+ }
+
+ ret = wm831x_reg_unlock(wm831x);
+ if (ret != 0) {
+ dev_err(wm831x->dev, "Failed to unlock registers: %d\n", ret);
+ return;
+ }
+
+ ret = wm831x_set_bits(wm831x, WM831X_BACKUP_CHARGER_CONTROL,
+ WM831X_BKUP_CHG_ENA_MASK |
+ WM831X_BKUP_CHG_MODE_MASK |
+ WM831X_BKUP_BATT_DET_ENA_MASK |
+ WM831X_BKUP_CHG_VLIM_MASK |
+ WM831X_BKUP_CHG_ILIM_MASK,
+ reg);
+ if (ret != 0)
+ dev_err(wm831x->dev,
+ "Failed to set backup charger config: %d\n", ret);
+
+ wm831x_reg_lock(wm831x);
+}
+
+static int wm831x_backup_get_prop(struct power_supply *psy,
+ enum power_supply_property psp,
+ union power_supply_propval *val)
+{
+ struct wm831x_backup *devdata = dev_get_drvdata(psy->dev.parent);
+ struct wm831x *wm831x = devdata->wm831x;
+ int ret = 0;
+
+ ret = wm831x_reg_read(wm831x, WM831X_BACKUP_CHARGER_CONTROL);
+ if (ret < 0)
+ return ret;
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_STATUS:
+ if (ret & WM831X_BKUP_CHG_STS)
+ val->intval = POWER_SUPPLY_STATUS_CHARGING;
+ else
+ val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING;
+ break;
+
+ case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+ ret = wm831x_backup_read_voltage(wm831x, WM831X_AUX_BKUP_BATT,
+ val);
+ break;
+
+ case POWER_SUPPLY_PROP_PRESENT:
+ if (ret & WM831X_BKUP_CHG_STS)
+ val->intval = 1;
+ else
+ val->intval = 0;
+ break;
+
+ default:
+ ret = -EINVAL;
+ break;
+ }
+
+ return ret;
+}
+
+static enum power_supply_property wm831x_backup_props[] = {
+ POWER_SUPPLY_PROP_STATUS,
+ POWER_SUPPLY_PROP_VOLTAGE_NOW,
+ POWER_SUPPLY_PROP_PRESENT,
+};
+
+/*********************************************************************
+ * Initialisation
+ *********************************************************************/
+
+static int wm831x_backup_probe(struct platform_device *pdev)
+{
+ struct wm831x *wm831x = dev_get_drvdata(pdev->dev.parent);
+ struct wm831x_pdata *wm831x_pdata = wm831x->dev->platform_data;
+ struct wm831x_backup *devdata;
+
+ devdata = devm_kzalloc(&pdev->dev, sizeof(struct wm831x_backup),
+ GFP_KERNEL);
+ if (devdata == NULL)
+ return -ENOMEM;
+
+ devdata->wm831x = wm831x;
+ platform_set_drvdata(pdev, devdata);
+
+ /* We ignore configuration failures since we can still read
+ * back the status without enabling the charger (which may
+ * already be enabled anyway).
+ */
+ wm831x_config_backup(wm831x);
+
+ if (wm831x_pdata && wm831x_pdata->wm831x_num)
+ snprintf(devdata->name, sizeof(devdata->name),
+ "wm831x-backup.%d", wm831x_pdata->wm831x_num);
+ else
+ snprintf(devdata->name, sizeof(devdata->name),
+ "wm831x-backup");
+
+ devdata->backup_desc.name = devdata->name;
+ devdata->backup_desc.type = POWER_SUPPLY_TYPE_BATTERY;
+ devdata->backup_desc.properties = wm831x_backup_props;
+ devdata->backup_desc.num_properties = ARRAY_SIZE(wm831x_backup_props);
+ devdata->backup_desc.get_property = wm831x_backup_get_prop;
+ devdata->backup = power_supply_register(&pdev->dev,
+ &devdata->backup_desc, NULL);
+
+ return PTR_ERR_OR_ZERO(devdata->backup);
+}
+
+static int wm831x_backup_remove(struct platform_device *pdev)
+{
+ struct wm831x_backup *devdata = platform_get_drvdata(pdev);
+
+ power_supply_unregister(devdata->backup);
+
+ return 0;
+}
+
+static struct platform_driver wm831x_backup_driver = {
+ .probe = wm831x_backup_probe,
+ .remove = wm831x_backup_remove,
+ .driver = {
+ .name = "wm831x-backup",
+ },
+};
+
+module_platform_driver(wm831x_backup_driver);
+
+MODULE_DESCRIPTION("Backup battery charger driver for WM831x PMICs");
+MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:wm831x-backup");
diff --git a/drivers/power/supply/wm831x_power.c b/drivers/power/supply/wm831x_power.c
new file mode 100644
index 000000000..18b33f14d
--- /dev/null
+++ b/drivers/power/supply/wm831x_power.c
@@ -0,0 +1,742 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * PMU driver for Wolfson Microelectronics wm831x PMICs
+ *
+ * Copyright 2009 Wolfson Microelectronics PLC.
+ */
+
+#include <linux/module.h>
+#include <linux/err.h>
+#include <linux/platform_device.h>
+#include <linux/power_supply.h>
+#include <linux/slab.h>
+#include <linux/usb/phy.h>
+
+#include <linux/mfd/wm831x/core.h>
+#include <linux/mfd/wm831x/auxadc.h>
+#include <linux/mfd/wm831x/pmu.h>
+#include <linux/mfd/wm831x/pdata.h>
+
+struct wm831x_power {
+ struct wm831x *wm831x;
+ struct power_supply *wall;
+ struct power_supply *usb;
+ struct power_supply *battery;
+ struct power_supply_desc wall_desc;
+ struct power_supply_desc usb_desc;
+ struct power_supply_desc battery_desc;
+ char wall_name[20];
+ char usb_name[20];
+ char battery_name[20];
+ bool have_battery;
+ struct usb_phy *usb_phy;
+ struct notifier_block usb_notify;
+};
+
+static int wm831x_power_check_online(struct wm831x *wm831x, int supply,
+ union power_supply_propval *val)
+{
+ int ret;
+
+ ret = wm831x_reg_read(wm831x, WM831X_SYSTEM_STATUS);
+ if (ret < 0)
+ return ret;
+
+ if (ret & supply)
+ val->intval = 1;
+ else
+ val->intval = 0;
+
+ return 0;
+}
+
+static int wm831x_power_read_voltage(struct wm831x *wm831x,
+ enum wm831x_auxadc src,
+ union power_supply_propval *val)
+{
+ int ret;
+
+ ret = wm831x_auxadc_read_uv(wm831x, src);
+ if (ret >= 0)
+ val->intval = ret;
+
+ return ret;
+}
+
+/*********************************************************************
+ * WALL Power
+ *********************************************************************/
+static int wm831x_wall_get_prop(struct power_supply *psy,
+ enum power_supply_property psp,
+ union power_supply_propval *val)
+{
+ struct wm831x_power *wm831x_power = dev_get_drvdata(psy->dev.parent);
+ struct wm831x *wm831x = wm831x_power->wm831x;
+ int ret = 0;
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_ONLINE:
+ ret = wm831x_power_check_online(wm831x, WM831X_PWR_WALL, val);
+ break;
+ case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+ ret = wm831x_power_read_voltage(wm831x, WM831X_AUX_WALL, val);
+ break;
+ default:
+ ret = -EINVAL;
+ break;
+ }
+
+ return ret;
+}
+
+static enum power_supply_property wm831x_wall_props[] = {
+ POWER_SUPPLY_PROP_ONLINE,
+ POWER_SUPPLY_PROP_VOLTAGE_NOW,
+};
+
+/*********************************************************************
+ * USB Power
+ *********************************************************************/
+static int wm831x_usb_get_prop(struct power_supply *psy,
+ enum power_supply_property psp,
+ union power_supply_propval *val)
+{
+ struct wm831x_power *wm831x_power = dev_get_drvdata(psy->dev.parent);
+ struct wm831x *wm831x = wm831x_power->wm831x;
+ int ret = 0;
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_ONLINE:
+ ret = wm831x_power_check_online(wm831x, WM831X_PWR_USB, val);
+ break;
+ case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+ ret = wm831x_power_read_voltage(wm831x, WM831X_AUX_USB, val);
+ break;
+ default:
+ ret = -EINVAL;
+ break;
+ }
+
+ return ret;
+}
+
+static enum power_supply_property wm831x_usb_props[] = {
+ POWER_SUPPLY_PROP_ONLINE,
+ POWER_SUPPLY_PROP_VOLTAGE_NOW,
+};
+
+/* In milliamps */
+static const unsigned int wm831x_usb_limits[] = {
+ 0,
+ 2,
+ 100,
+ 500,
+ 900,
+ 1500,
+ 1800,
+ 550,
+};
+
+static int wm831x_usb_limit_change(struct notifier_block *nb,
+ unsigned long limit, void *data)
+{
+ struct wm831x_power *wm831x_power = container_of(nb,
+ struct wm831x_power,
+ usb_notify);
+ unsigned int i, best;
+
+ /* Find the highest supported limit */
+ best = 0;
+ for (i = 0; i < ARRAY_SIZE(wm831x_usb_limits); i++) {
+ if (limit >= wm831x_usb_limits[i] &&
+ wm831x_usb_limits[best] < wm831x_usb_limits[i])
+ best = i;
+ }
+
+ dev_dbg(wm831x_power->wm831x->dev,
+ "Limiting USB current to %umA", wm831x_usb_limits[best]);
+
+ wm831x_set_bits(wm831x_power->wm831x, WM831X_POWER_STATE,
+ WM831X_USB_ILIM_MASK, best);
+
+ return 0;
+}
+
+/*********************************************************************
+ * Battery properties
+ *********************************************************************/
+
+struct chg_map {
+ int val;
+ int reg_val;
+};
+
+static struct chg_map trickle_ilims[] = {
+ { 50, 0 << WM831X_CHG_TRKL_ILIM_SHIFT },
+ { 100, 1 << WM831X_CHG_TRKL_ILIM_SHIFT },
+ { 150, 2 << WM831X_CHG_TRKL_ILIM_SHIFT },
+ { 200, 3 << WM831X_CHG_TRKL_ILIM_SHIFT },
+};
+
+static struct chg_map vsels[] = {
+ { 4050, 0 << WM831X_CHG_VSEL_SHIFT },
+ { 4100, 1 << WM831X_CHG_VSEL_SHIFT },
+ { 4150, 2 << WM831X_CHG_VSEL_SHIFT },
+ { 4200, 3 << WM831X_CHG_VSEL_SHIFT },
+};
+
+static struct chg_map fast_ilims[] = {
+ { 0, 0 << WM831X_CHG_FAST_ILIM_SHIFT },
+ { 50, 1 << WM831X_CHG_FAST_ILIM_SHIFT },
+ { 100, 2 << WM831X_CHG_FAST_ILIM_SHIFT },
+ { 150, 3 << WM831X_CHG_FAST_ILIM_SHIFT },
+ { 200, 4 << WM831X_CHG_FAST_ILIM_SHIFT },
+ { 250, 5 << WM831X_CHG_FAST_ILIM_SHIFT },
+ { 300, 6 << WM831X_CHG_FAST_ILIM_SHIFT },
+ { 350, 7 << WM831X_CHG_FAST_ILIM_SHIFT },
+ { 400, 8 << WM831X_CHG_FAST_ILIM_SHIFT },
+ { 450, 9 << WM831X_CHG_FAST_ILIM_SHIFT },
+ { 500, 10 << WM831X_CHG_FAST_ILIM_SHIFT },
+ { 600, 11 << WM831X_CHG_FAST_ILIM_SHIFT },
+ { 700, 12 << WM831X_CHG_FAST_ILIM_SHIFT },
+ { 800, 13 << WM831X_CHG_FAST_ILIM_SHIFT },
+ { 900, 14 << WM831X_CHG_FAST_ILIM_SHIFT },
+ { 1000, 15 << WM831X_CHG_FAST_ILIM_SHIFT },
+};
+
+static struct chg_map eoc_iterms[] = {
+ { 20, 0 << WM831X_CHG_ITERM_SHIFT },
+ { 30, 1 << WM831X_CHG_ITERM_SHIFT },
+ { 40, 2 << WM831X_CHG_ITERM_SHIFT },
+ { 50, 3 << WM831X_CHG_ITERM_SHIFT },
+ { 60, 4 << WM831X_CHG_ITERM_SHIFT },
+ { 70, 5 << WM831X_CHG_ITERM_SHIFT },
+ { 80, 6 << WM831X_CHG_ITERM_SHIFT },
+ { 90, 7 << WM831X_CHG_ITERM_SHIFT },
+};
+
+static struct chg_map chg_times[] = {
+ { 60, 0 << WM831X_CHG_TIME_SHIFT },
+ { 90, 1 << WM831X_CHG_TIME_SHIFT },
+ { 120, 2 << WM831X_CHG_TIME_SHIFT },
+ { 150, 3 << WM831X_CHG_TIME_SHIFT },
+ { 180, 4 << WM831X_CHG_TIME_SHIFT },
+ { 210, 5 << WM831X_CHG_TIME_SHIFT },
+ { 240, 6 << WM831X_CHG_TIME_SHIFT },
+ { 270, 7 << WM831X_CHG_TIME_SHIFT },
+ { 300, 8 << WM831X_CHG_TIME_SHIFT },
+ { 330, 9 << WM831X_CHG_TIME_SHIFT },
+ { 360, 10 << WM831X_CHG_TIME_SHIFT },
+ { 390, 11 << WM831X_CHG_TIME_SHIFT },
+ { 420, 12 << WM831X_CHG_TIME_SHIFT },
+ { 450, 13 << WM831X_CHG_TIME_SHIFT },
+ { 480, 14 << WM831X_CHG_TIME_SHIFT },
+ { 510, 15 << WM831X_CHG_TIME_SHIFT },
+};
+
+static void wm831x_battey_apply_config(struct wm831x *wm831x,
+ struct chg_map *map, int count, int val,
+ int *reg, const char *name,
+ const char *units)
+{
+ int i;
+
+ for (i = 0; i < count; i++)
+ if (val == map[i].val)
+ break;
+ if (i == count) {
+ dev_err(wm831x->dev, "Invalid %s %d%s\n",
+ name, val, units);
+ } else {
+ *reg |= map[i].reg_val;
+ dev_dbg(wm831x->dev, "Set %s of %d%s\n", name, val, units);
+ }
+}
+
+static void wm831x_config_battery(struct wm831x *wm831x)
+{
+ struct wm831x_pdata *wm831x_pdata = wm831x->dev->platform_data;
+ struct wm831x_battery_pdata *pdata;
+ int ret, reg1, reg2;
+
+ if (!wm831x_pdata || !wm831x_pdata->battery) {
+ dev_warn(wm831x->dev,
+ "No battery charger configuration\n");
+ return;
+ }
+
+ pdata = wm831x_pdata->battery;
+
+ reg1 = 0;
+ reg2 = 0;
+
+ if (!pdata->enable) {
+ dev_info(wm831x->dev, "Battery charger disabled\n");
+ return;
+ }
+
+ reg1 |= WM831X_CHG_ENA;
+ if (pdata->off_mask)
+ reg2 |= WM831X_CHG_OFF_MSK;
+ if (pdata->fast_enable)
+ reg1 |= WM831X_CHG_FAST;
+
+ wm831x_battey_apply_config(wm831x, trickle_ilims,
+ ARRAY_SIZE(trickle_ilims),
+ pdata->trickle_ilim, &reg2,
+ "trickle charge current limit", "mA");
+
+ wm831x_battey_apply_config(wm831x, vsels, ARRAY_SIZE(vsels),
+ pdata->vsel, &reg2,
+ "target voltage", "mV");
+
+ wm831x_battey_apply_config(wm831x, fast_ilims, ARRAY_SIZE(fast_ilims),
+ pdata->fast_ilim, &reg2,
+ "fast charge current limit", "mA");
+
+ wm831x_battey_apply_config(wm831x, eoc_iterms, ARRAY_SIZE(eoc_iterms),
+ pdata->eoc_iterm, &reg1,
+ "end of charge current threshold", "mA");
+
+ wm831x_battey_apply_config(wm831x, chg_times, ARRAY_SIZE(chg_times),
+ pdata->timeout, &reg2,
+ "charger timeout", "min");
+
+ ret = wm831x_reg_unlock(wm831x);
+ if (ret != 0) {
+ dev_err(wm831x->dev, "Failed to unlock registers: %d\n", ret);
+ return;
+ }
+
+ ret = wm831x_set_bits(wm831x, WM831X_CHARGER_CONTROL_1,
+ WM831X_CHG_ENA_MASK |
+ WM831X_CHG_FAST_MASK |
+ WM831X_CHG_ITERM_MASK,
+ reg1);
+ if (ret != 0)
+ dev_err(wm831x->dev, "Failed to set charger control 1: %d\n",
+ ret);
+
+ ret = wm831x_set_bits(wm831x, WM831X_CHARGER_CONTROL_2,
+ WM831X_CHG_OFF_MSK |
+ WM831X_CHG_TIME_MASK |
+ WM831X_CHG_FAST_ILIM_MASK |
+ WM831X_CHG_TRKL_ILIM_MASK |
+ WM831X_CHG_VSEL_MASK,
+ reg2);
+ if (ret != 0)
+ dev_err(wm831x->dev, "Failed to set charger control 2: %d\n",
+ ret);
+
+ wm831x_reg_lock(wm831x);
+}
+
+static int wm831x_bat_check_status(struct wm831x *wm831x, int *status)
+{
+ int ret;
+
+ ret = wm831x_reg_read(wm831x, WM831X_SYSTEM_STATUS);
+ if (ret < 0)
+ return ret;
+
+ if (ret & WM831X_PWR_SRC_BATT) {
+ *status = POWER_SUPPLY_STATUS_DISCHARGING;
+ return 0;
+ }
+
+ ret = wm831x_reg_read(wm831x, WM831X_CHARGER_STATUS);
+ if (ret < 0)
+ return ret;
+
+ switch (ret & WM831X_CHG_STATE_MASK) {
+ case WM831X_CHG_STATE_OFF:
+ *status = POWER_SUPPLY_STATUS_NOT_CHARGING;
+ break;
+ case WM831X_CHG_STATE_TRICKLE:
+ case WM831X_CHG_STATE_FAST:
+ *status = POWER_SUPPLY_STATUS_CHARGING;
+ break;
+
+ default:
+ *status = POWER_SUPPLY_STATUS_UNKNOWN;
+ break;
+ }
+
+ return 0;
+}
+
+static int wm831x_bat_check_type(struct wm831x *wm831x, int *type)
+{
+ int ret;
+
+ ret = wm831x_reg_read(wm831x, WM831X_CHARGER_STATUS);
+ if (ret < 0)
+ return ret;
+
+ switch (ret & WM831X_CHG_STATE_MASK) {
+ case WM831X_CHG_STATE_TRICKLE:
+ case WM831X_CHG_STATE_TRICKLE_OT:
+ *type = POWER_SUPPLY_CHARGE_TYPE_TRICKLE;
+ break;
+ case WM831X_CHG_STATE_FAST:
+ case WM831X_CHG_STATE_FAST_OT:
+ *type = POWER_SUPPLY_CHARGE_TYPE_FAST;
+ break;
+ default:
+ *type = POWER_SUPPLY_CHARGE_TYPE_NONE;
+ break;
+ }
+
+ return 0;
+}
+
+static int wm831x_bat_check_health(struct wm831x *wm831x, int *health)
+{
+ int ret;
+
+ ret = wm831x_reg_read(wm831x, WM831X_CHARGER_STATUS);
+ if (ret < 0)
+ return ret;
+
+ if (ret & WM831X_BATT_HOT_STS) {
+ *health = POWER_SUPPLY_HEALTH_OVERHEAT;
+ return 0;
+ }
+
+ if (ret & WM831X_BATT_COLD_STS) {
+ *health = POWER_SUPPLY_HEALTH_COLD;
+ return 0;
+ }
+
+ if (ret & WM831X_BATT_OV_STS) {
+ *health = POWER_SUPPLY_HEALTH_OVERVOLTAGE;
+ return 0;
+ }
+
+ switch (ret & WM831X_CHG_STATE_MASK) {
+ case WM831X_CHG_STATE_TRICKLE_OT:
+ case WM831X_CHG_STATE_FAST_OT:
+ *health = POWER_SUPPLY_HEALTH_OVERHEAT;
+ break;
+ case WM831X_CHG_STATE_DEFECTIVE:
+ *health = POWER_SUPPLY_HEALTH_UNSPEC_FAILURE;
+ break;
+ default:
+ *health = POWER_SUPPLY_HEALTH_GOOD;
+ break;
+ }
+
+ return 0;
+}
+
+static int wm831x_bat_get_prop(struct power_supply *psy,
+ enum power_supply_property psp,
+ union power_supply_propval *val)
+{
+ struct wm831x_power *wm831x_power = dev_get_drvdata(psy->dev.parent);
+ struct wm831x *wm831x = wm831x_power->wm831x;
+ int ret = 0;
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_STATUS:
+ ret = wm831x_bat_check_status(wm831x, &val->intval);
+ break;
+ case POWER_SUPPLY_PROP_ONLINE:
+ ret = wm831x_power_check_online(wm831x, WM831X_PWR_SRC_BATT,
+ val);
+ break;
+ case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+ ret = wm831x_power_read_voltage(wm831x, WM831X_AUX_BATT, val);
+ break;
+ case POWER_SUPPLY_PROP_HEALTH:
+ ret = wm831x_bat_check_health(wm831x, &val->intval);
+ break;
+ case POWER_SUPPLY_PROP_CHARGE_TYPE:
+ ret = wm831x_bat_check_type(wm831x, &val->intval);
+ break;
+ default:
+ ret = -EINVAL;
+ break;
+ }
+
+ return ret;
+}
+
+static enum power_supply_property wm831x_bat_props[] = {
+ POWER_SUPPLY_PROP_STATUS,
+ POWER_SUPPLY_PROP_ONLINE,
+ POWER_SUPPLY_PROP_VOLTAGE_NOW,
+ POWER_SUPPLY_PROP_HEALTH,
+ POWER_SUPPLY_PROP_CHARGE_TYPE,
+};
+
+static const char *wm831x_bat_irqs[] = {
+ "BATT HOT",
+ "BATT COLD",
+ "BATT FAIL",
+ "OV",
+ "END",
+ "TO",
+ "MODE",
+ "START",
+};
+
+static irqreturn_t wm831x_bat_irq(int irq, void *data)
+{
+ struct wm831x_power *wm831x_power = data;
+ struct wm831x *wm831x = wm831x_power->wm831x;
+
+ dev_dbg(wm831x->dev, "Battery status changed: %d\n", irq);
+
+ /* The battery charger is autonomous so we don't need to do
+ * anything except kick user space */
+ if (wm831x_power->have_battery)
+ power_supply_changed(wm831x_power->battery);
+
+ return IRQ_HANDLED;
+}
+
+
+/*********************************************************************
+ * Initialisation
+ *********************************************************************/
+
+static irqreturn_t wm831x_syslo_irq(int irq, void *data)
+{
+ struct wm831x_power *wm831x_power = data;
+ struct wm831x *wm831x = wm831x_power->wm831x;
+
+ /* Not much we can actually *do* but tell people for
+ * posterity, we're probably about to run out of power. */
+ dev_crit(wm831x->dev, "SYSVDD under voltage\n");
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t wm831x_pwr_src_irq(int irq, void *data)
+{
+ struct wm831x_power *wm831x_power = data;
+ struct wm831x *wm831x = wm831x_power->wm831x;
+
+ dev_dbg(wm831x->dev, "Power source changed\n");
+
+ /* Just notify for everything - little harm in overnotifying. */
+ if (wm831x_power->have_battery)
+ power_supply_changed(wm831x_power->battery);
+ power_supply_changed(wm831x_power->usb);
+ power_supply_changed(wm831x_power->wall);
+
+ return IRQ_HANDLED;
+}
+
+static int wm831x_power_probe(struct platform_device *pdev)
+{
+ struct wm831x *wm831x = dev_get_drvdata(pdev->dev.parent);
+ struct wm831x_pdata *wm831x_pdata = wm831x->dev->platform_data;
+ struct wm831x_power *power;
+ int ret, irq, i;
+
+ power = devm_kzalloc(&pdev->dev, sizeof(struct wm831x_power),
+ GFP_KERNEL);
+ if (power == NULL)
+ return -ENOMEM;
+
+ power->wm831x = wm831x;
+ platform_set_drvdata(pdev, power);
+
+ if (wm831x_pdata && wm831x_pdata->wm831x_num) {
+ snprintf(power->wall_name, sizeof(power->wall_name),
+ "wm831x-wall.%d", wm831x_pdata->wm831x_num);
+ snprintf(power->battery_name, sizeof(power->wall_name),
+ "wm831x-battery.%d", wm831x_pdata->wm831x_num);
+ snprintf(power->usb_name, sizeof(power->wall_name),
+ "wm831x-usb.%d", wm831x_pdata->wm831x_num);
+ } else {
+ snprintf(power->wall_name, sizeof(power->wall_name),
+ "wm831x-wall");
+ snprintf(power->battery_name, sizeof(power->wall_name),
+ "wm831x-battery");
+ snprintf(power->usb_name, sizeof(power->wall_name),
+ "wm831x-usb");
+ }
+
+ /* We ignore configuration failures since we can still read back
+ * the status without enabling the charger.
+ */
+ wm831x_config_battery(wm831x);
+
+ power->wall_desc.name = power->wall_name;
+ power->wall_desc.type = POWER_SUPPLY_TYPE_MAINS;
+ power->wall_desc.properties = wm831x_wall_props;
+ power->wall_desc.num_properties = ARRAY_SIZE(wm831x_wall_props);
+ power->wall_desc.get_property = wm831x_wall_get_prop;
+ power->wall = power_supply_register(&pdev->dev, &power->wall_desc,
+ NULL);
+ if (IS_ERR(power->wall)) {
+ ret = PTR_ERR(power->wall);
+ goto err;
+ }
+
+ power->usb_desc.name = power->usb_name,
+ power->usb_desc.type = POWER_SUPPLY_TYPE_USB;
+ power->usb_desc.properties = wm831x_usb_props;
+ power->usb_desc.num_properties = ARRAY_SIZE(wm831x_usb_props);
+ power->usb_desc.get_property = wm831x_usb_get_prop;
+ power->usb = power_supply_register(&pdev->dev, &power->usb_desc, NULL);
+ if (IS_ERR(power->usb)) {
+ ret = PTR_ERR(power->usb);
+ goto err_wall;
+ }
+
+ ret = wm831x_reg_read(wm831x, WM831X_CHARGER_CONTROL_1);
+ if (ret < 0)
+ goto err_wall;
+ power->have_battery = ret & WM831X_CHG_ENA;
+
+ if (power->have_battery) {
+ power->battery_desc.name = power->battery_name;
+ power->battery_desc.properties = wm831x_bat_props;
+ power->battery_desc.num_properties = ARRAY_SIZE(wm831x_bat_props);
+ power->battery_desc.get_property = wm831x_bat_get_prop;
+ power->battery_desc.use_for_apm = 1;
+ power->battery = power_supply_register(&pdev->dev,
+ &power->battery_desc,
+ NULL);
+ if (IS_ERR(power->battery)) {
+ ret = PTR_ERR(power->battery);
+ goto err_usb;
+ }
+ }
+
+ irq = wm831x_irq(wm831x, platform_get_irq_byname(pdev, "SYSLO"));
+ ret = request_threaded_irq(irq, NULL, wm831x_syslo_irq,
+ IRQF_TRIGGER_RISING | IRQF_ONESHOT, "System power low",
+ power);
+ if (ret != 0) {
+ dev_err(&pdev->dev, "Failed to request SYSLO IRQ %d: %d\n",
+ irq, ret);
+ goto err_battery;
+ }
+
+ irq = wm831x_irq(wm831x, platform_get_irq_byname(pdev, "PWR SRC"));
+ ret = request_threaded_irq(irq, NULL, wm831x_pwr_src_irq,
+ IRQF_TRIGGER_RISING | IRQF_ONESHOT, "Power source",
+ power);
+ if (ret != 0) {
+ dev_err(&pdev->dev, "Failed to request PWR SRC IRQ %d: %d\n",
+ irq, ret);
+ goto err_syslo;
+ }
+
+ for (i = 0; i < ARRAY_SIZE(wm831x_bat_irqs); i++) {
+ irq = wm831x_irq(wm831x,
+ platform_get_irq_byname(pdev,
+ wm831x_bat_irqs[i]));
+ ret = request_threaded_irq(irq, NULL, wm831x_bat_irq,
+ IRQF_TRIGGER_RISING | IRQF_ONESHOT,
+ wm831x_bat_irqs[i],
+ power);
+ if (ret != 0) {
+ dev_err(&pdev->dev,
+ "Failed to request %s IRQ %d: %d\n",
+ wm831x_bat_irqs[i], irq, ret);
+ goto err_bat_irq;
+ }
+ }
+
+ power->usb_phy = devm_usb_get_phy_by_phandle(&pdev->dev, "phys", 0);
+ ret = PTR_ERR_OR_ZERO(power->usb_phy);
+
+ switch (ret) {
+ case 0:
+ power->usb_notify.notifier_call = wm831x_usb_limit_change;
+ ret = usb_register_notifier(power->usb_phy, &power->usb_notify);
+ if (ret) {
+ dev_err(&pdev->dev, "Failed to register notifier: %d\n",
+ ret);
+ goto err_bat_irq;
+ }
+ break;
+ case -EINVAL:
+ case -ENODEV:
+ /* ignore missing usb-phy, it's optional */
+ power->usb_phy = NULL;
+ ret = 0;
+ break;
+ default:
+ dev_err(&pdev->dev, "Failed to find USB phy: %d\n", ret);
+ fallthrough;
+ case -EPROBE_DEFER:
+ goto err_bat_irq;
+ break;
+ }
+
+ return ret;
+
+err_bat_irq:
+ --i;
+ for (; i >= 0; i--) {
+ irq = platform_get_irq_byname(pdev, wm831x_bat_irqs[i]);
+ free_irq(irq, power);
+ }
+ irq = wm831x_irq(wm831x, platform_get_irq_byname(pdev, "PWR SRC"));
+ free_irq(irq, power);
+err_syslo:
+ irq = wm831x_irq(wm831x, platform_get_irq_byname(pdev, "SYSLO"));
+ free_irq(irq, power);
+err_battery:
+ if (power->have_battery)
+ power_supply_unregister(power->battery);
+err_usb:
+ power_supply_unregister(power->usb);
+err_wall:
+ power_supply_unregister(power->wall);
+err:
+ return ret;
+}
+
+static int wm831x_power_remove(struct platform_device *pdev)
+{
+ struct wm831x_power *wm831x_power = platform_get_drvdata(pdev);
+ struct wm831x *wm831x = wm831x_power->wm831x;
+ int irq, i;
+
+ if (wm831x_power->usb_phy) {
+ usb_unregister_notifier(wm831x_power->usb_phy,
+ &wm831x_power->usb_notify);
+ }
+
+ for (i = 0; i < ARRAY_SIZE(wm831x_bat_irqs); i++) {
+ irq = wm831x_irq(wm831x,
+ platform_get_irq_byname(pdev,
+ wm831x_bat_irqs[i]));
+ free_irq(irq, wm831x_power);
+ }
+
+ irq = wm831x_irq(wm831x, platform_get_irq_byname(pdev, "PWR SRC"));
+ free_irq(irq, wm831x_power);
+
+ irq = wm831x_irq(wm831x, platform_get_irq_byname(pdev, "SYSLO"));
+ free_irq(irq, wm831x_power);
+
+ if (wm831x_power->have_battery)
+ power_supply_unregister(wm831x_power->battery);
+ power_supply_unregister(wm831x_power->wall);
+ power_supply_unregister(wm831x_power->usb);
+ return 0;
+}
+
+static struct platform_driver wm831x_power_driver = {
+ .probe = wm831x_power_probe,
+ .remove = wm831x_power_remove,
+ .driver = {
+ .name = "wm831x-power",
+ },
+};
+
+module_platform_driver(wm831x_power_driver);
+
+MODULE_DESCRIPTION("Power supply driver for WM831x PMICs");
+MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:wm831x-power");
diff --git a/drivers/power/supply/wm8350_power.c b/drivers/power/supply/wm8350_power.c
new file mode 100644
index 000000000..908cfd45d
--- /dev/null
+++ b/drivers/power/supply/wm8350_power.c
@@ -0,0 +1,607 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Battery driver for wm8350 PMIC
+ *
+ * Copyright 2007, 2008 Wolfson Microelectronics PLC.
+ *
+ * Based on OLPC Battery Driver
+ *
+ * Copyright 2006 David Woodhouse <dwmw2@infradead.org>
+ */
+
+#include <linux/module.h>
+#include <linux/err.h>
+#include <linux/platform_device.h>
+#include <linux/power_supply.h>
+#include <linux/mfd/wm8350/supply.h>
+#include <linux/mfd/wm8350/core.h>
+#include <linux/mfd/wm8350/comparator.h>
+
+static int wm8350_read_battery_uvolts(struct wm8350 *wm8350)
+{
+ return wm8350_read_auxadc(wm8350, WM8350_AUXADC_BATT, 0, 0)
+ * WM8350_AUX_COEFF;
+}
+
+static int wm8350_read_line_uvolts(struct wm8350 *wm8350)
+{
+ return wm8350_read_auxadc(wm8350, WM8350_AUXADC_LINE, 0, 0)
+ * WM8350_AUX_COEFF;
+}
+
+static int wm8350_read_usb_uvolts(struct wm8350 *wm8350)
+{
+ return wm8350_read_auxadc(wm8350, WM8350_AUXADC_USB, 0, 0)
+ * WM8350_AUX_COEFF;
+}
+
+#define WM8350_BATT_SUPPLY 1
+#define WM8350_USB_SUPPLY 2
+#define WM8350_LINE_SUPPLY 4
+
+static inline int wm8350_charge_time_min(struct wm8350 *wm8350, int min)
+{
+ if (!wm8350->power.rev_g_coeff)
+ return (((min - 30) / 15) & 0xf) << 8;
+ else
+ return (((min - 30) / 30) & 0xf) << 8;
+}
+
+static int wm8350_get_supplies(struct wm8350 *wm8350)
+{
+ u16 sm, ov, co, chrg;
+ int supplies = 0;
+
+ sm = wm8350_reg_read(wm8350, WM8350_STATE_MACHINE_STATUS);
+ ov = wm8350_reg_read(wm8350, WM8350_MISC_OVERRIDES);
+ co = wm8350_reg_read(wm8350, WM8350_COMPARATOR_OVERRIDES);
+ chrg = wm8350_reg_read(wm8350, WM8350_BATTERY_CHARGER_CONTROL_2);
+
+ /* USB_SM */
+ sm = (sm & WM8350_USB_SM_MASK) >> WM8350_USB_SM_SHIFT;
+
+ /* CHG_ISEL */
+ chrg &= WM8350_CHG_ISEL_MASK;
+
+ /* If the USB state machine is active then we're using that with or
+ * without battery, otherwise check for wall supply */
+ if (((sm == WM8350_USB_SM_100_SLV) ||
+ (sm == WM8350_USB_SM_500_SLV) ||
+ (sm == WM8350_USB_SM_STDBY_SLV))
+ && !(ov & WM8350_USB_LIMIT_OVRDE))
+ supplies = WM8350_USB_SUPPLY;
+ else if (((sm == WM8350_USB_SM_100_SLV) ||
+ (sm == WM8350_USB_SM_500_SLV) ||
+ (sm == WM8350_USB_SM_STDBY_SLV))
+ && (ov & WM8350_USB_LIMIT_OVRDE) && (chrg == 0))
+ supplies = WM8350_USB_SUPPLY | WM8350_BATT_SUPPLY;
+ else if (co & WM8350_WALL_FB_OVRDE)
+ supplies = WM8350_LINE_SUPPLY;
+ else
+ supplies = WM8350_BATT_SUPPLY;
+
+ return supplies;
+}
+
+static int wm8350_charger_config(struct wm8350 *wm8350,
+ struct wm8350_charger_policy *policy)
+{
+ u16 reg, eoc_mA, fast_limit_mA;
+
+ if (!policy) {
+ dev_warn(wm8350->dev,
+ "No charger policy, charger not configured.\n");
+ return -EINVAL;
+ }
+
+ /* make sure USB fast charge current is not > 500mA */
+ if (policy->fast_limit_USB_mA > 500) {
+ dev_err(wm8350->dev, "USB fast charge > 500mA\n");
+ return -EINVAL;
+ }
+
+ eoc_mA = WM8350_CHG_EOC_mA(policy->eoc_mA);
+
+ wm8350_reg_unlock(wm8350);
+
+ reg = wm8350_reg_read(wm8350, WM8350_BATTERY_CHARGER_CONTROL_1)
+ & WM8350_CHG_ENA_R168;
+ wm8350_reg_write(wm8350, WM8350_BATTERY_CHARGER_CONTROL_1,
+ reg | eoc_mA | policy->trickle_start_mV |
+ WM8350_CHG_TRICKLE_TEMP_CHOKE |
+ WM8350_CHG_TRICKLE_USB_CHOKE |
+ WM8350_CHG_FAST_USB_THROTTLE);
+
+ if (wm8350_get_supplies(wm8350) & WM8350_USB_SUPPLY) {
+ fast_limit_mA =
+ WM8350_CHG_FAST_LIMIT_mA(policy->fast_limit_USB_mA);
+ wm8350_reg_write(wm8350, WM8350_BATTERY_CHARGER_CONTROL_2,
+ policy->charge_mV | policy->trickle_charge_USB_mA |
+ fast_limit_mA | wm8350_charge_time_min(wm8350,
+ policy->charge_timeout));
+
+ } else {
+ fast_limit_mA =
+ WM8350_CHG_FAST_LIMIT_mA(policy->fast_limit_mA);
+ wm8350_reg_write(wm8350, WM8350_BATTERY_CHARGER_CONTROL_2,
+ policy->charge_mV | policy->trickle_charge_mA |
+ fast_limit_mA | wm8350_charge_time_min(wm8350,
+ policy->charge_timeout));
+ }
+
+ wm8350_reg_lock(wm8350);
+ return 0;
+}
+
+static int wm8350_batt_status(struct wm8350 *wm8350)
+{
+ u16 state;
+
+ state = wm8350_reg_read(wm8350, WM8350_BATTERY_CHARGER_CONTROL_2);
+ state &= WM8350_CHG_STS_MASK;
+
+ switch (state) {
+ case WM8350_CHG_STS_OFF:
+ return POWER_SUPPLY_STATUS_DISCHARGING;
+
+ case WM8350_CHG_STS_TRICKLE:
+ case WM8350_CHG_STS_FAST:
+ return POWER_SUPPLY_STATUS_CHARGING;
+
+ default:
+ return POWER_SUPPLY_STATUS_UNKNOWN;
+ }
+}
+
+static ssize_t charger_state_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct wm8350 *wm8350 = dev_get_drvdata(dev);
+ char *charge;
+ int state;
+
+ state = wm8350_reg_read(wm8350, WM8350_BATTERY_CHARGER_CONTROL_2) &
+ WM8350_CHG_STS_MASK;
+ switch (state) {
+ case WM8350_CHG_STS_OFF:
+ charge = "Charger Off";
+ break;
+ case WM8350_CHG_STS_TRICKLE:
+ charge = "Trickle Charging";
+ break;
+ case WM8350_CHG_STS_FAST:
+ charge = "Fast Charging";
+ break;
+ default:
+ return 0;
+ }
+
+ return sprintf(buf, "%s\n", charge);
+}
+
+static DEVICE_ATTR_RO(charger_state);
+
+static irqreturn_t wm8350_charger_handler(int irq, void *data)
+{
+ struct wm8350 *wm8350 = data;
+ struct wm8350_power *power = &wm8350->power;
+ struct wm8350_charger_policy *policy = power->policy;
+
+ switch (irq - wm8350->irq_base) {
+ case WM8350_IRQ_CHG_BAT_FAIL:
+ dev_err(wm8350->dev, "battery failed\n");
+ break;
+ case WM8350_IRQ_CHG_TO:
+ dev_err(wm8350->dev, "charger timeout\n");
+ power_supply_changed(power->battery);
+ break;
+
+ case WM8350_IRQ_CHG_BAT_HOT:
+ case WM8350_IRQ_CHG_BAT_COLD:
+ case WM8350_IRQ_CHG_START:
+ case WM8350_IRQ_CHG_END:
+ power_supply_changed(power->battery);
+ break;
+
+ case WM8350_IRQ_CHG_FAST_RDY:
+ dev_dbg(wm8350->dev, "fast charger ready\n");
+ wm8350_charger_config(wm8350, policy);
+ wm8350_reg_unlock(wm8350);
+ wm8350_set_bits(wm8350, WM8350_BATTERY_CHARGER_CONTROL_1,
+ WM8350_CHG_FAST);
+ wm8350_reg_lock(wm8350);
+ break;
+
+ case WM8350_IRQ_CHG_VBATT_LT_3P9:
+ dev_warn(wm8350->dev, "battery < 3.9V\n");
+ break;
+ case WM8350_IRQ_CHG_VBATT_LT_3P1:
+ dev_warn(wm8350->dev, "battery < 3.1V\n");
+ break;
+ case WM8350_IRQ_CHG_VBATT_LT_2P85:
+ dev_warn(wm8350->dev, "battery < 2.85V\n");
+ break;
+
+ /* Supply change. We will overnotify but it should do
+ * no harm. */
+ case WM8350_IRQ_EXT_USB_FB:
+ case WM8350_IRQ_EXT_WALL_FB:
+ wm8350_charger_config(wm8350, policy);
+ fallthrough;
+ case WM8350_IRQ_EXT_BAT_FB:
+ power_supply_changed(power->battery);
+ power_supply_changed(power->usb);
+ power_supply_changed(power->ac);
+ break;
+
+ default:
+ dev_err(wm8350->dev, "Unknown interrupt %d\n", irq);
+ }
+
+ return IRQ_HANDLED;
+}
+
+/*********************************************************************
+ * AC Power
+ *********************************************************************/
+static int wm8350_ac_get_prop(struct power_supply *psy,
+ enum power_supply_property psp,
+ union power_supply_propval *val)
+{
+ struct wm8350 *wm8350 = dev_get_drvdata(psy->dev.parent);
+ int ret = 0;
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_ONLINE:
+ val->intval = !!(wm8350_get_supplies(wm8350) &
+ WM8350_LINE_SUPPLY);
+ break;
+ case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+ val->intval = wm8350_read_line_uvolts(wm8350);
+ break;
+ default:
+ ret = -EINVAL;
+ break;
+ }
+ return ret;
+}
+
+static enum power_supply_property wm8350_ac_props[] = {
+ POWER_SUPPLY_PROP_ONLINE,
+ POWER_SUPPLY_PROP_VOLTAGE_NOW,
+};
+
+/*********************************************************************
+ * USB Power
+ *********************************************************************/
+static int wm8350_usb_get_prop(struct power_supply *psy,
+ enum power_supply_property psp,
+ union power_supply_propval *val)
+{
+ struct wm8350 *wm8350 = dev_get_drvdata(psy->dev.parent);
+ int ret = 0;
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_ONLINE:
+ val->intval = !!(wm8350_get_supplies(wm8350) &
+ WM8350_USB_SUPPLY);
+ break;
+ case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+ val->intval = wm8350_read_usb_uvolts(wm8350);
+ break;
+ default:
+ ret = -EINVAL;
+ break;
+ }
+ return ret;
+}
+
+static enum power_supply_property wm8350_usb_props[] = {
+ POWER_SUPPLY_PROP_ONLINE,
+ POWER_SUPPLY_PROP_VOLTAGE_NOW,
+};
+
+/*********************************************************************
+ * Battery properties
+ *********************************************************************/
+
+static int wm8350_bat_check_health(struct wm8350 *wm8350)
+{
+ u16 reg;
+
+ if (wm8350_read_battery_uvolts(wm8350) < 2850000)
+ return POWER_SUPPLY_HEALTH_UNSPEC_FAILURE;
+
+ reg = wm8350_reg_read(wm8350, WM8350_CHARGER_OVERRIDES);
+ if (reg & WM8350_CHG_BATT_HOT_OVRDE)
+ return POWER_SUPPLY_HEALTH_OVERHEAT;
+
+ if (reg & WM8350_CHG_BATT_COLD_OVRDE)
+ return POWER_SUPPLY_HEALTH_COLD;
+
+ return POWER_SUPPLY_HEALTH_GOOD;
+}
+
+static int wm8350_bat_get_charge_type(struct wm8350 *wm8350)
+{
+ int state;
+
+ state = wm8350_reg_read(wm8350, WM8350_BATTERY_CHARGER_CONTROL_2) &
+ WM8350_CHG_STS_MASK;
+ switch (state) {
+ case WM8350_CHG_STS_OFF:
+ return POWER_SUPPLY_CHARGE_TYPE_NONE;
+ case WM8350_CHG_STS_TRICKLE:
+ return POWER_SUPPLY_CHARGE_TYPE_TRICKLE;
+ case WM8350_CHG_STS_FAST:
+ return POWER_SUPPLY_CHARGE_TYPE_FAST;
+ default:
+ return POWER_SUPPLY_CHARGE_TYPE_UNKNOWN;
+ }
+}
+
+static int wm8350_bat_get_property(struct power_supply *psy,
+ enum power_supply_property psp,
+ union power_supply_propval *val)
+{
+ struct wm8350 *wm8350 = dev_get_drvdata(psy->dev.parent);
+ int ret = 0;
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_STATUS:
+ val->intval = wm8350_batt_status(wm8350);
+ break;
+ case POWER_SUPPLY_PROP_ONLINE:
+ val->intval = !!(wm8350_get_supplies(wm8350) &
+ WM8350_BATT_SUPPLY);
+ break;
+ case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+ val->intval = wm8350_read_battery_uvolts(wm8350);
+ break;
+ case POWER_SUPPLY_PROP_HEALTH:
+ val->intval = wm8350_bat_check_health(wm8350);
+ break;
+ case POWER_SUPPLY_PROP_CHARGE_TYPE:
+ val->intval = wm8350_bat_get_charge_type(wm8350);
+ break;
+ default:
+ ret = -EINVAL;
+ break;
+ }
+
+ return ret;
+}
+
+static enum power_supply_property wm8350_bat_props[] = {
+ POWER_SUPPLY_PROP_STATUS,
+ POWER_SUPPLY_PROP_ONLINE,
+ POWER_SUPPLY_PROP_VOLTAGE_NOW,
+ POWER_SUPPLY_PROP_HEALTH,
+ POWER_SUPPLY_PROP_CHARGE_TYPE,
+};
+
+static const struct power_supply_desc wm8350_ac_desc = {
+ .name = "wm8350-ac",
+ .type = POWER_SUPPLY_TYPE_MAINS,
+ .properties = wm8350_ac_props,
+ .num_properties = ARRAY_SIZE(wm8350_ac_props),
+ .get_property = wm8350_ac_get_prop,
+};
+
+static const struct power_supply_desc wm8350_battery_desc = {
+ .name = "wm8350-battery",
+ .properties = wm8350_bat_props,
+ .num_properties = ARRAY_SIZE(wm8350_bat_props),
+ .get_property = wm8350_bat_get_property,
+ .use_for_apm = 1,
+};
+
+static const struct power_supply_desc wm8350_usb_desc = {
+ .name = "wm8350-usb",
+ .type = POWER_SUPPLY_TYPE_USB,
+ .properties = wm8350_usb_props,
+ .num_properties = ARRAY_SIZE(wm8350_usb_props),
+ .get_property = wm8350_usb_get_prop,
+};
+
+/*********************************************************************
+ * Initialisation
+ *********************************************************************/
+
+static int wm8350_init_charger(struct wm8350 *wm8350)
+{
+ int ret;
+
+ /* register our interest in charger events */
+ ret = wm8350_register_irq(wm8350, WM8350_IRQ_CHG_BAT_HOT,
+ wm8350_charger_handler, 0, "Battery hot", wm8350);
+ if (ret)
+ goto err;
+
+ ret = wm8350_register_irq(wm8350, WM8350_IRQ_CHG_BAT_COLD,
+ wm8350_charger_handler, 0, "Battery cold", wm8350);
+ if (ret)
+ goto free_chg_bat_hot;
+
+ ret = wm8350_register_irq(wm8350, WM8350_IRQ_CHG_BAT_FAIL,
+ wm8350_charger_handler, 0, "Battery fail", wm8350);
+ if (ret)
+ goto free_chg_bat_cold;
+
+ ret = wm8350_register_irq(wm8350, WM8350_IRQ_CHG_TO,
+ wm8350_charger_handler, 0,
+ "Charger timeout", wm8350);
+ if (ret)
+ goto free_chg_bat_fail;
+
+ ret = wm8350_register_irq(wm8350, WM8350_IRQ_CHG_END,
+ wm8350_charger_handler, 0,
+ "Charge end", wm8350);
+ if (ret)
+ goto free_chg_to;
+
+ ret = wm8350_register_irq(wm8350, WM8350_IRQ_CHG_START,
+ wm8350_charger_handler, 0,
+ "Charge start", wm8350);
+ if (ret)
+ goto free_chg_end;
+
+ ret = wm8350_register_irq(wm8350, WM8350_IRQ_CHG_FAST_RDY,
+ wm8350_charger_handler, 0,
+ "Fast charge ready", wm8350);
+ if (ret)
+ goto free_chg_start;
+
+ ret = wm8350_register_irq(wm8350, WM8350_IRQ_CHG_VBATT_LT_3P9,
+ wm8350_charger_handler, 0,
+ "Battery <3.9V", wm8350);
+ if (ret)
+ goto free_chg_fast_rdy;
+
+ ret = wm8350_register_irq(wm8350, WM8350_IRQ_CHG_VBATT_LT_3P1,
+ wm8350_charger_handler, 0,
+ "Battery <3.1V", wm8350);
+ if (ret)
+ goto free_chg_vbatt_lt_3p9;
+
+ ret = wm8350_register_irq(wm8350, WM8350_IRQ_CHG_VBATT_LT_2P85,
+ wm8350_charger_handler, 0,
+ "Battery <2.85V", wm8350);
+ if (ret)
+ goto free_chg_vbatt_lt_3p1;
+
+ /* and supply change events */
+ ret = wm8350_register_irq(wm8350, WM8350_IRQ_EXT_USB_FB,
+ wm8350_charger_handler, 0, "USB", wm8350);
+ if (ret)
+ goto free_chg_vbatt_lt_2p85;
+
+ ret = wm8350_register_irq(wm8350, WM8350_IRQ_EXT_WALL_FB,
+ wm8350_charger_handler, 0, "Wall", wm8350);
+ if (ret)
+ goto free_ext_usb_fb;
+
+ ret = wm8350_register_irq(wm8350, WM8350_IRQ_EXT_BAT_FB,
+ wm8350_charger_handler, 0, "Battery", wm8350);
+ if (ret)
+ goto free_ext_wall_fb;
+
+ return 0;
+
+free_ext_wall_fb:
+ wm8350_free_irq(wm8350, WM8350_IRQ_EXT_WALL_FB, wm8350);
+free_ext_usb_fb:
+ wm8350_free_irq(wm8350, WM8350_IRQ_EXT_USB_FB, wm8350);
+free_chg_vbatt_lt_2p85:
+ wm8350_free_irq(wm8350, WM8350_IRQ_CHG_VBATT_LT_2P85, wm8350);
+free_chg_vbatt_lt_3p1:
+ wm8350_free_irq(wm8350, WM8350_IRQ_CHG_VBATT_LT_3P1, wm8350);
+free_chg_vbatt_lt_3p9:
+ wm8350_free_irq(wm8350, WM8350_IRQ_CHG_VBATT_LT_3P9, wm8350);
+free_chg_fast_rdy:
+ wm8350_free_irq(wm8350, WM8350_IRQ_CHG_FAST_RDY, wm8350);
+free_chg_start:
+ wm8350_free_irq(wm8350, WM8350_IRQ_CHG_START, wm8350);
+free_chg_end:
+ wm8350_free_irq(wm8350, WM8350_IRQ_CHG_END, wm8350);
+free_chg_to:
+ wm8350_free_irq(wm8350, WM8350_IRQ_CHG_TO, wm8350);
+free_chg_bat_fail:
+ wm8350_free_irq(wm8350, WM8350_IRQ_CHG_BAT_FAIL, wm8350);
+free_chg_bat_cold:
+ wm8350_free_irq(wm8350, WM8350_IRQ_CHG_BAT_COLD, wm8350);
+free_chg_bat_hot:
+ wm8350_free_irq(wm8350, WM8350_IRQ_CHG_BAT_HOT, wm8350);
+err:
+ return ret;
+}
+
+static void free_charger_irq(struct wm8350 *wm8350)
+{
+ wm8350_free_irq(wm8350, WM8350_IRQ_CHG_BAT_HOT, wm8350);
+ wm8350_free_irq(wm8350, WM8350_IRQ_CHG_BAT_COLD, wm8350);
+ wm8350_free_irq(wm8350, WM8350_IRQ_CHG_BAT_FAIL, wm8350);
+ wm8350_free_irq(wm8350, WM8350_IRQ_CHG_TO, wm8350);
+ wm8350_free_irq(wm8350, WM8350_IRQ_CHG_END, wm8350);
+ wm8350_free_irq(wm8350, WM8350_IRQ_CHG_START, wm8350);
+ wm8350_free_irq(wm8350, WM8350_IRQ_CHG_FAST_RDY, wm8350);
+ wm8350_free_irq(wm8350, WM8350_IRQ_CHG_VBATT_LT_3P9, wm8350);
+ wm8350_free_irq(wm8350, WM8350_IRQ_CHG_VBATT_LT_3P1, wm8350);
+ wm8350_free_irq(wm8350, WM8350_IRQ_CHG_VBATT_LT_2P85, wm8350);
+ wm8350_free_irq(wm8350, WM8350_IRQ_EXT_USB_FB, wm8350);
+ wm8350_free_irq(wm8350, WM8350_IRQ_EXT_WALL_FB, wm8350);
+ wm8350_free_irq(wm8350, WM8350_IRQ_EXT_BAT_FB, wm8350);
+}
+
+static int wm8350_power_probe(struct platform_device *pdev)
+{
+ struct wm8350 *wm8350 = platform_get_drvdata(pdev);
+ struct wm8350_power *power = &wm8350->power;
+ struct wm8350_charger_policy *policy = power->policy;
+ int ret;
+
+ power->ac = power_supply_register(&pdev->dev, &wm8350_ac_desc, NULL);
+ if (IS_ERR(power->ac))
+ return PTR_ERR(power->ac);
+
+ power->battery = power_supply_register(&pdev->dev, &wm8350_battery_desc,
+ NULL);
+ if (IS_ERR(power->battery)) {
+ ret = PTR_ERR(power->battery);
+ goto battery_failed;
+ }
+
+ power->usb = power_supply_register(&pdev->dev, &wm8350_usb_desc, NULL);
+ if (IS_ERR(power->usb)) {
+ ret = PTR_ERR(power->usb);
+ goto usb_failed;
+ }
+
+ ret = device_create_file(&pdev->dev, &dev_attr_charger_state);
+ if (ret < 0)
+ dev_warn(wm8350->dev, "failed to add charge sysfs: %d\n", ret);
+ ret = 0;
+
+ wm8350_init_charger(wm8350);
+ if (wm8350_charger_config(wm8350, policy) == 0) {
+ wm8350_reg_unlock(wm8350);
+ wm8350_set_bits(wm8350, WM8350_POWER_MGMT_5, WM8350_CHG_ENA);
+ wm8350_reg_lock(wm8350);
+ }
+
+ return ret;
+
+usb_failed:
+ power_supply_unregister(power->battery);
+battery_failed:
+ power_supply_unregister(power->ac);
+
+ return ret;
+}
+
+static int wm8350_power_remove(struct platform_device *pdev)
+{
+ struct wm8350 *wm8350 = platform_get_drvdata(pdev);
+ struct wm8350_power *power = &wm8350->power;
+
+ free_charger_irq(wm8350);
+ device_remove_file(&pdev->dev, &dev_attr_charger_state);
+ power_supply_unregister(power->battery);
+ power_supply_unregister(power->ac);
+ power_supply_unregister(power->usb);
+ return 0;
+}
+
+static struct platform_driver wm8350_power_driver = {
+ .probe = wm8350_power_probe,
+ .remove = wm8350_power_remove,
+ .driver = {
+ .name = "wm8350-power",
+ },
+};
+
+module_platform_driver(wm8350_power_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Power supply driver for WM8350");
+MODULE_ALIAS("platform:wm8350-power");
diff --git a/drivers/power/supply/wm97xx_battery.c b/drivers/power/supply/wm97xx_battery.c
new file mode 100644
index 000000000..58f01659d
--- /dev/null
+++ b/drivers/power/supply/wm97xx_battery.c
@@ -0,0 +1,283 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Battery measurement code for WM97xx
+ *
+ * based on tosa_battery.c
+ *
+ * Copyright (C) 2008 Marek Vasut <marek.vasut@gmail.com>
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/power_supply.h>
+#include <linux/wm97xx.h>
+#include <linux/spinlock.h>
+#include <linux/interrupt.h>
+#include <linux/gpio.h>
+#include <linux/irq.h>
+#include <linux/slab.h>
+
+static struct work_struct bat_work;
+static DEFINE_MUTEX(work_lock);
+static int bat_status = POWER_SUPPLY_STATUS_UNKNOWN;
+static enum power_supply_property *prop;
+
+static unsigned long wm97xx_read_bat(struct power_supply *bat_ps)
+{
+ struct wm97xx_batt_pdata *pdata = power_supply_get_drvdata(bat_ps);
+
+ return wm97xx_read_aux_adc(dev_get_drvdata(bat_ps->dev.parent),
+ pdata->batt_aux) * pdata->batt_mult /
+ pdata->batt_div;
+}
+
+static unsigned long wm97xx_read_temp(struct power_supply *bat_ps)
+{
+ struct wm97xx_batt_pdata *pdata = power_supply_get_drvdata(bat_ps);
+
+ return wm97xx_read_aux_adc(dev_get_drvdata(bat_ps->dev.parent),
+ pdata->temp_aux) * pdata->temp_mult /
+ pdata->temp_div;
+}
+
+static int wm97xx_bat_get_property(struct power_supply *bat_ps,
+ enum power_supply_property psp,
+ union power_supply_propval *val)
+{
+ struct wm97xx_batt_pdata *pdata = power_supply_get_drvdata(bat_ps);
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_STATUS:
+ val->intval = bat_status;
+ break;
+ case POWER_SUPPLY_PROP_TECHNOLOGY:
+ val->intval = pdata->batt_tech;
+ break;
+ case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+ if (pdata->batt_aux >= 0)
+ val->intval = wm97xx_read_bat(bat_ps);
+ else
+ return -EINVAL;
+ break;
+ case POWER_SUPPLY_PROP_TEMP:
+ if (pdata->temp_aux >= 0)
+ val->intval = wm97xx_read_temp(bat_ps);
+ else
+ return -EINVAL;
+ break;
+ case POWER_SUPPLY_PROP_VOLTAGE_MAX:
+ if (pdata->max_voltage >= 0)
+ val->intval = pdata->max_voltage;
+ else
+ return -EINVAL;
+ break;
+ case POWER_SUPPLY_PROP_VOLTAGE_MIN:
+ if (pdata->min_voltage >= 0)
+ val->intval = pdata->min_voltage;
+ else
+ return -EINVAL;
+ break;
+ case POWER_SUPPLY_PROP_PRESENT:
+ val->intval = 1;
+ break;
+ default:
+ return -EINVAL;
+ }
+ return 0;
+}
+
+static void wm97xx_bat_external_power_changed(struct power_supply *bat_ps)
+{
+ schedule_work(&bat_work);
+}
+
+static void wm97xx_bat_update(struct power_supply *bat_ps)
+{
+ int old_status = bat_status;
+ struct wm97xx_batt_pdata *pdata = power_supply_get_drvdata(bat_ps);
+
+ mutex_lock(&work_lock);
+
+ bat_status = (pdata->charge_gpio >= 0) ?
+ (gpio_get_value(pdata->charge_gpio) ?
+ POWER_SUPPLY_STATUS_DISCHARGING :
+ POWER_SUPPLY_STATUS_CHARGING) :
+ POWER_SUPPLY_STATUS_UNKNOWN;
+
+ if (old_status != bat_status) {
+ pr_debug("%s: %i -> %i\n", bat_ps->desc->name, old_status,
+ bat_status);
+ power_supply_changed(bat_ps);
+ }
+
+ mutex_unlock(&work_lock);
+}
+
+static struct power_supply *bat_psy;
+static struct power_supply_desc bat_psy_desc = {
+ .type = POWER_SUPPLY_TYPE_BATTERY,
+ .get_property = wm97xx_bat_get_property,
+ .external_power_changed = wm97xx_bat_external_power_changed,
+ .use_for_apm = 1,
+};
+
+static void wm97xx_bat_work(struct work_struct *work)
+{
+ wm97xx_bat_update(bat_psy);
+}
+
+static irqreturn_t wm97xx_chrg_irq(int irq, void *data)
+{
+ schedule_work(&bat_work);
+ return IRQ_HANDLED;
+}
+
+#ifdef CONFIG_PM
+static int wm97xx_bat_suspend(struct device *dev)
+{
+ flush_work(&bat_work);
+ return 0;
+}
+
+static int wm97xx_bat_resume(struct device *dev)
+{
+ schedule_work(&bat_work);
+ return 0;
+}
+
+static const struct dev_pm_ops wm97xx_bat_pm_ops = {
+ .suspend = wm97xx_bat_suspend,
+ .resume = wm97xx_bat_resume,
+};
+#endif
+
+static int wm97xx_bat_probe(struct platform_device *dev)
+{
+ int ret = 0;
+ int props = 1; /* POWER_SUPPLY_PROP_PRESENT */
+ int i = 0;
+ struct wm97xx_batt_pdata *pdata = dev->dev.platform_data;
+ struct power_supply_config cfg = {};
+
+ if (!pdata) {
+ dev_err(&dev->dev, "No platform data supplied\n");
+ return -EINVAL;
+ }
+
+ cfg.drv_data = pdata;
+
+ if (dev->id != -1)
+ return -EINVAL;
+
+ if (gpio_is_valid(pdata->charge_gpio)) {
+ ret = gpio_request(pdata->charge_gpio, "BATT CHRG");
+ if (ret)
+ goto err;
+ ret = gpio_direction_input(pdata->charge_gpio);
+ if (ret)
+ goto err2;
+ ret = request_irq(gpio_to_irq(pdata->charge_gpio),
+ wm97xx_chrg_irq, 0,
+ "AC Detect", dev);
+ if (ret)
+ goto err2;
+ props++; /* POWER_SUPPLY_PROP_STATUS */
+ }
+
+ if (pdata->batt_tech >= 0)
+ props++; /* POWER_SUPPLY_PROP_TECHNOLOGY */
+ if (pdata->temp_aux >= 0)
+ props++; /* POWER_SUPPLY_PROP_TEMP */
+ if (pdata->batt_aux >= 0)
+ props++; /* POWER_SUPPLY_PROP_VOLTAGE_NOW */
+ if (pdata->max_voltage >= 0)
+ props++; /* POWER_SUPPLY_PROP_VOLTAGE_MAX */
+ if (pdata->min_voltage >= 0)
+ props++; /* POWER_SUPPLY_PROP_VOLTAGE_MIN */
+
+ prop = kcalloc(props, sizeof(*prop), GFP_KERNEL);
+ if (!prop) {
+ ret = -ENOMEM;
+ goto err3;
+ }
+
+ prop[i++] = POWER_SUPPLY_PROP_PRESENT;
+ if (pdata->charge_gpio >= 0)
+ prop[i++] = POWER_SUPPLY_PROP_STATUS;
+ if (pdata->batt_tech >= 0)
+ prop[i++] = POWER_SUPPLY_PROP_TECHNOLOGY;
+ if (pdata->temp_aux >= 0)
+ prop[i++] = POWER_SUPPLY_PROP_TEMP;
+ if (pdata->batt_aux >= 0)
+ prop[i++] = POWER_SUPPLY_PROP_VOLTAGE_NOW;
+ if (pdata->max_voltage >= 0)
+ prop[i++] = POWER_SUPPLY_PROP_VOLTAGE_MAX;
+ if (pdata->min_voltage >= 0)
+ prop[i++] = POWER_SUPPLY_PROP_VOLTAGE_MIN;
+
+ INIT_WORK(&bat_work, wm97xx_bat_work);
+
+ if (!pdata->batt_name) {
+ dev_info(&dev->dev, "Please consider setting proper battery "
+ "name in platform definition file, falling "
+ "back to name \"wm97xx-batt\"\n");
+ bat_psy_desc.name = "wm97xx-batt";
+ } else
+ bat_psy_desc.name = pdata->batt_name;
+
+ bat_psy_desc.properties = prop;
+ bat_psy_desc.num_properties = props;
+
+ bat_psy = power_supply_register(&dev->dev, &bat_psy_desc, &cfg);
+ if (!IS_ERR(bat_psy)) {
+ schedule_work(&bat_work);
+ } else {
+ ret = PTR_ERR(bat_psy);
+ goto err4;
+ }
+
+ return 0;
+err4:
+ kfree(prop);
+err3:
+ if (gpio_is_valid(pdata->charge_gpio))
+ free_irq(gpio_to_irq(pdata->charge_gpio), dev);
+err2:
+ if (gpio_is_valid(pdata->charge_gpio))
+ gpio_free(pdata->charge_gpio);
+err:
+ return ret;
+}
+
+static int wm97xx_bat_remove(struct platform_device *dev)
+{
+ struct wm97xx_batt_pdata *pdata = dev->dev.platform_data;
+
+ if (pdata && gpio_is_valid(pdata->charge_gpio)) {
+ free_irq(gpio_to_irq(pdata->charge_gpio), dev);
+ gpio_free(pdata->charge_gpio);
+ }
+ cancel_work_sync(&bat_work);
+ power_supply_unregister(bat_psy);
+ kfree(prop);
+ return 0;
+}
+
+static struct platform_driver wm97xx_bat_driver = {
+ .driver = {
+ .name = "wm97xx-battery",
+#ifdef CONFIG_PM
+ .pm = &wm97xx_bat_pm_ops,
+#endif
+ },
+ .probe = wm97xx_bat_probe,
+ .remove = wm97xx_bat_remove,
+};
+
+module_platform_driver(wm97xx_bat_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Marek Vasut <marek.vasut@gmail.com>");
+MODULE_DESCRIPTION("WM97xx battery driver");
diff --git a/drivers/power/supply/z2_battery.c b/drivers/power/supply/z2_battery.c
new file mode 100644
index 000000000..ebd2e42a4
--- /dev/null
+++ b/drivers/power/supply/z2_battery.c
@@ -0,0 +1,326 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Battery measurement code for Zipit Z2
+ *
+ * Copyright (C) 2009 Peter Edwards <sweetlilmre@gmail.com>
+ */
+
+#include <linux/module.h>
+#include <linux/gpio.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/power_supply.h>
+#include <linux/slab.h>
+#include <linux/z2_battery.h>
+
+#define Z2_DEFAULT_NAME "Z2"
+
+struct z2_charger {
+ struct z2_battery_info *info;
+ int bat_status;
+ struct i2c_client *client;
+ struct power_supply *batt_ps;
+ struct power_supply_desc batt_ps_desc;
+ struct mutex work_lock;
+ struct work_struct bat_work;
+};
+
+static unsigned long z2_read_bat(struct z2_charger *charger)
+{
+ int data;
+ data = i2c_smbus_read_byte_data(charger->client,
+ charger->info->batt_I2C_reg);
+ if (data < 0)
+ return 0;
+
+ return data * charger->info->batt_mult / charger->info->batt_div;
+}
+
+static int z2_batt_get_property(struct power_supply *batt_ps,
+ enum power_supply_property psp,
+ union power_supply_propval *val)
+{
+ struct z2_charger *charger = power_supply_get_drvdata(batt_ps);
+ struct z2_battery_info *info = charger->info;
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_STATUS:
+ val->intval = charger->bat_status;
+ break;
+ case POWER_SUPPLY_PROP_TECHNOLOGY:
+ val->intval = info->batt_tech;
+ break;
+ case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+ if (info->batt_I2C_reg >= 0)
+ val->intval = z2_read_bat(charger);
+ else
+ return -EINVAL;
+ break;
+ case POWER_SUPPLY_PROP_VOLTAGE_MAX:
+ if (info->max_voltage >= 0)
+ val->intval = info->max_voltage;
+ else
+ return -EINVAL;
+ break;
+ case POWER_SUPPLY_PROP_VOLTAGE_MIN:
+ if (info->min_voltage >= 0)
+ val->intval = info->min_voltage;
+ else
+ return -EINVAL;
+ break;
+ case POWER_SUPPLY_PROP_PRESENT:
+ val->intval = 1;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static void z2_batt_ext_power_changed(struct power_supply *batt_ps)
+{
+ struct z2_charger *charger = power_supply_get_drvdata(batt_ps);
+
+ schedule_work(&charger->bat_work);
+}
+
+static void z2_batt_update(struct z2_charger *charger)
+{
+ int old_status = charger->bat_status;
+ struct z2_battery_info *info;
+
+ info = charger->info;
+
+ mutex_lock(&charger->work_lock);
+
+ charger->bat_status = (info->charge_gpio >= 0) ?
+ (gpio_get_value(info->charge_gpio) ?
+ POWER_SUPPLY_STATUS_CHARGING :
+ POWER_SUPPLY_STATUS_DISCHARGING) :
+ POWER_SUPPLY_STATUS_UNKNOWN;
+
+ if (old_status != charger->bat_status) {
+ pr_debug("%s: %i -> %i\n", charger->batt_ps->desc->name,
+ old_status,
+ charger->bat_status);
+ power_supply_changed(charger->batt_ps);
+ }
+
+ mutex_unlock(&charger->work_lock);
+}
+
+static void z2_batt_work(struct work_struct *work)
+{
+ struct z2_charger *charger;
+ charger = container_of(work, struct z2_charger, bat_work);
+ z2_batt_update(charger);
+}
+
+static irqreturn_t z2_charge_switch_irq(int irq, void *devid)
+{
+ struct z2_charger *charger = devid;
+ schedule_work(&charger->bat_work);
+ return IRQ_HANDLED;
+}
+
+static int z2_batt_ps_init(struct z2_charger *charger, int props)
+{
+ int i = 0;
+ enum power_supply_property *prop;
+ struct z2_battery_info *info = charger->info;
+
+ if (info->charge_gpio >= 0)
+ props++; /* POWER_SUPPLY_PROP_STATUS */
+ if (info->batt_tech >= 0)
+ props++; /* POWER_SUPPLY_PROP_TECHNOLOGY */
+ if (info->batt_I2C_reg >= 0)
+ props++; /* POWER_SUPPLY_PROP_VOLTAGE_NOW */
+ if (info->max_voltage >= 0)
+ props++; /* POWER_SUPPLY_PROP_VOLTAGE_MAX */
+ if (info->min_voltage >= 0)
+ props++; /* POWER_SUPPLY_PROP_VOLTAGE_MIN */
+
+ prop = kcalloc(props, sizeof(*prop), GFP_KERNEL);
+ if (!prop)
+ return -ENOMEM;
+
+ prop[i++] = POWER_SUPPLY_PROP_PRESENT;
+ if (info->charge_gpio >= 0)
+ prop[i++] = POWER_SUPPLY_PROP_STATUS;
+ if (info->batt_tech >= 0)
+ prop[i++] = POWER_SUPPLY_PROP_TECHNOLOGY;
+ if (info->batt_I2C_reg >= 0)
+ prop[i++] = POWER_SUPPLY_PROP_VOLTAGE_NOW;
+ if (info->max_voltage >= 0)
+ prop[i++] = POWER_SUPPLY_PROP_VOLTAGE_MAX;
+ if (info->min_voltage >= 0)
+ prop[i++] = POWER_SUPPLY_PROP_VOLTAGE_MIN;
+
+ if (!info->batt_name) {
+ dev_info(&charger->client->dev,
+ "Please consider setting proper battery "
+ "name in platform definition file, falling "
+ "back to name \" Z2_DEFAULT_NAME \"\n");
+ charger->batt_ps_desc.name = Z2_DEFAULT_NAME;
+ } else
+ charger->batt_ps_desc.name = info->batt_name;
+
+ charger->batt_ps_desc.properties = prop;
+ charger->batt_ps_desc.num_properties = props;
+ charger->batt_ps_desc.type = POWER_SUPPLY_TYPE_BATTERY;
+ charger->batt_ps_desc.get_property = z2_batt_get_property;
+ charger->batt_ps_desc.external_power_changed =
+ z2_batt_ext_power_changed;
+ charger->batt_ps_desc.use_for_apm = 1;
+
+ return 0;
+}
+
+static int z2_batt_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ int ret = 0;
+ int props = 1; /* POWER_SUPPLY_PROP_PRESENT */
+ struct z2_charger *charger;
+ struct z2_battery_info *info = client->dev.platform_data;
+ struct power_supply_config psy_cfg = {};
+
+ if (info == NULL) {
+ dev_err(&client->dev,
+ "Please set platform device platform_data"
+ " to a valid z2_battery_info pointer!\n");
+ return -EINVAL;
+ }
+
+ charger = kzalloc(sizeof(*charger), GFP_KERNEL);
+ if (charger == NULL)
+ return -ENOMEM;
+
+ charger->bat_status = POWER_SUPPLY_STATUS_UNKNOWN;
+ charger->info = info;
+ charger->client = client;
+ i2c_set_clientdata(client, charger);
+ psy_cfg.drv_data = charger;
+
+ mutex_init(&charger->work_lock);
+
+ if (info->charge_gpio >= 0 && gpio_is_valid(info->charge_gpio)) {
+ ret = gpio_request(info->charge_gpio, "BATT CHRG");
+ if (ret)
+ goto err;
+
+ ret = gpio_direction_input(info->charge_gpio);
+ if (ret)
+ goto err2;
+
+ irq_set_irq_type(gpio_to_irq(info->charge_gpio),
+ IRQ_TYPE_EDGE_BOTH);
+ ret = request_irq(gpio_to_irq(info->charge_gpio),
+ z2_charge_switch_irq, 0,
+ "AC Detect", charger);
+ if (ret)
+ goto err3;
+ }
+
+ ret = z2_batt_ps_init(charger, props);
+ if (ret)
+ goto err3;
+
+ INIT_WORK(&charger->bat_work, z2_batt_work);
+
+ charger->batt_ps = power_supply_register(&client->dev,
+ &charger->batt_ps_desc,
+ &psy_cfg);
+ if (IS_ERR(charger->batt_ps)) {
+ ret = PTR_ERR(charger->batt_ps);
+ goto err4;
+ }
+
+ schedule_work(&charger->bat_work);
+
+ return 0;
+
+err4:
+ kfree(charger->batt_ps_desc.properties);
+err3:
+ if (info->charge_gpio >= 0 && gpio_is_valid(info->charge_gpio))
+ free_irq(gpio_to_irq(info->charge_gpio), charger);
+err2:
+ if (info->charge_gpio >= 0 && gpio_is_valid(info->charge_gpio))
+ gpio_free(info->charge_gpio);
+err:
+ kfree(charger);
+ return ret;
+}
+
+static int z2_batt_remove(struct i2c_client *client)
+{
+ struct z2_charger *charger = i2c_get_clientdata(client);
+ struct z2_battery_info *info = charger->info;
+
+ cancel_work_sync(&charger->bat_work);
+ power_supply_unregister(charger->batt_ps);
+
+ kfree(charger->batt_ps_desc.properties);
+ if (info->charge_gpio >= 0 && gpio_is_valid(info->charge_gpio)) {
+ free_irq(gpio_to_irq(info->charge_gpio), charger);
+ gpio_free(info->charge_gpio);
+ }
+
+ kfree(charger);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int z2_batt_suspend(struct device *dev)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct z2_charger *charger = i2c_get_clientdata(client);
+
+ flush_work(&charger->bat_work);
+ return 0;
+}
+
+static int z2_batt_resume(struct device *dev)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct z2_charger *charger = i2c_get_clientdata(client);
+
+ schedule_work(&charger->bat_work);
+ return 0;
+}
+
+static const struct dev_pm_ops z2_battery_pm_ops = {
+ .suspend = z2_batt_suspend,
+ .resume = z2_batt_resume,
+};
+
+#define Z2_BATTERY_PM_OPS (&z2_battery_pm_ops)
+
+#else
+#define Z2_BATTERY_PM_OPS (NULL)
+#endif
+
+static const struct i2c_device_id z2_batt_id[] = {
+ { "aer915", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, z2_batt_id);
+
+static struct i2c_driver z2_batt_driver = {
+ .driver = {
+ .name = "z2-battery",
+ .pm = Z2_BATTERY_PM_OPS
+ },
+ .probe = z2_batt_probe,
+ .remove = z2_batt_remove,
+ .id_table = z2_batt_id,
+};
+module_i2c_driver(z2_batt_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Peter Edwards <sweetlilmre@gmail.com>");
+MODULE_DESCRIPTION("Zipit Z2 battery driver");