diff options
Diffstat (limited to 'drivers/pwm/Kconfig')
| -rw-r--r-- | drivers/pwm/Kconfig | 573 |
1 files changed, 573 insertions, 0 deletions
diff --git a/drivers/pwm/Kconfig b/drivers/pwm/Kconfig new file mode 100644 index 000000000..63be5362f --- /dev/null +++ b/drivers/pwm/Kconfig @@ -0,0 +1,573 @@ +# SPDX-License-Identifier: GPL-2.0-only +menuconfig PWM + bool "Pulse-Width Modulation (PWM) Support" + help + Generic Pulse-Width Modulation (PWM) support. + + In Pulse-Width Modulation, a variation of the width of pulses + in a rectangular pulse signal is used as a means to alter the + average power of the signal. Applications include efficient + power delivery and voltage regulation. In computer systems, + PWMs are commonly used to control fans or the brightness of + display backlights. + + This framework provides a generic interface to PWM devices + within the Linux kernel. On the driver side it provides an API + to register and unregister a PWM chip, an abstraction of a PWM + controller, that supports one or more PWM devices. Client + drivers can request PWM devices and use the generic framework + to configure as well as enable and disable them. + + This generic framework replaces the legacy PWM framework which + allows only a single driver implementing the required API. Not + all legacy implementations have been ported to the framework + yet. The framework provides an API that is backward compatible + with the legacy framework so that existing client drivers + continue to work as expected. + + If unsure, say no. + +if PWM + +config PWM_SYSFS + bool + default y if SYSFS + +config PWM_DEBUG + bool "PWM lowlevel drivers additional checks and debug messages" + depends on DEBUG_KERNEL + help + This option enables some additional checks to help lowlevel driver + authors to get their callbacks implemented correctly. + It is expected to introduce some runtime overhead and diagnostic + output to the kernel log, so only enable while working on a driver. + +config PWM_AB8500 + tristate "AB8500 PWM support" + depends on AB8500_CORE && ARCH_U8500 + help + Generic PWM framework driver for Analog Baseband AB8500. + + To compile this driver as a module, choose M here: the module + will be called pwm-ab8500. + +config PWM_ATMEL + tristate "Atmel PWM support" + depends on OF + depends on ARCH_AT91 || COMPILE_TEST + help + Generic PWM framework driver for Atmel SoC. + + To compile this driver as a module, choose M here: the module + will be called pwm-atmel. + +config PWM_ATMEL_HLCDC_PWM + tristate "Atmel HLCDC PWM support" + depends on MFD_ATMEL_HLCDC + depends on HAVE_CLK + help + Generic PWM framework driver for the PWM output of the HLCDC + (Atmel High-end LCD Controller). This PWM output is mainly used + to control the LCD backlight. + + To compile this driver as a module, choose M here: the module + will be called pwm-atmel-hlcdc. + +config PWM_ATMEL_TCB + tristate "Atmel TC Block PWM support" + depends on ATMEL_TCLIB && OF + help + Generic PWM framework driver for Atmel Timer Counter Block. + + A Timer Counter Block provides 6 PWM devices grouped by 2. + Devices in a given group must have the same period. + + To compile this driver as a module, choose M here: the module + will be called pwm-atmel-tcb. + +config PWM_BCM_IPROC + tristate "iProc PWM support" + depends on ARCH_BCM_IPROC || COMPILE_TEST + depends on COMMON_CLK + default ARCH_BCM_IPROC + help + Generic PWM framework driver for Broadcom iProc PWM block. This + block is used in Broadcom iProc SoC's. + + To compile this driver as a module, choose M here: the module + will be called pwm-bcm-iproc. + +config PWM_BCM_KONA + tristate "Kona PWM support" + depends on ARCH_BCM_MOBILE || ARCH_BCM_CYGNUS || COMPILE_TEST + depends on HAVE_CLK && HAS_IOMEM + default ARCH_BCM_MOBILE || ARCH_BCM_CYGNUS + help + Generic PWM framework driver for Broadcom Kona PWM block. + + To compile this driver as a module, choose M here: the module + will be called pwm-bcm-kona. + +config PWM_BCM2835 + tristate "BCM2835 PWM support" + depends on ARCH_BCM2835 || ARCH_BRCMSTB || COMPILE_TEST + help + PWM framework driver for BCM2835 controller (Raspberry Pi) + + To compile this driver as a module, choose M here: the module + will be called pwm-bcm2835. + +config PWM_BERLIN + tristate "Marvell Berlin PWM support" + depends on ARCH_BERLIN || COMPILE_TEST + help + PWM framework driver for Marvell Berlin SoCs. + + To compile this driver as a module, choose M here: the module + will be called pwm-berlin. + +config PWM_BRCMSTB + tristate "Broadcom STB PWM support" + depends on ARCH_BRCMSTB || BMIPS_GENERIC || COMPILE_TEST + help + Generic PWM framework driver for the Broadcom Set-top-Box + SoCs (BCM7xxx). + + To compile this driver as a module, choose M Here: the module + will be called pwm-brcmstb.c. + +config PWM_CLPS711X + tristate "CLPS711X PWM support" + depends on ARCH_CLPS711X || COMPILE_TEST + depends on HAS_IOMEM + help + Generic PWM framework driver for Cirrus Logic CLPS711X. + + To compile this driver as a module, choose M here: the module + will be called pwm-clps711x. + +config PWM_CRC + bool "Intel Crystalcove (CRC) PWM support" + depends on X86 && INTEL_SOC_PMIC + help + Generic PWM framework driver for Crystalcove (CRC) PMIC based PWM + control. + +config PWM_CROS_EC + tristate "ChromeOS EC PWM driver" + depends on CROS_EC + help + PWM driver for exposing a PWM attached to the ChromeOS Embedded + Controller. + +config PWM_EP93XX + tristate "Cirrus Logic EP93xx PWM support" + depends on ARCH_EP93XX || COMPILE_TEST + help + Generic PWM framework driver for Cirrus Logic EP93xx. + + To compile this driver as a module, choose M here: the module + will be called pwm-ep93xx. + +config PWM_FSL_FTM + tristate "Freescale FlexTimer Module (FTM) PWM support" + depends on HAS_IOMEM + depends on OF + select REGMAP_MMIO + help + Generic FTM PWM framework driver for Freescale VF610 and + Layerscape LS-1 SoCs. + + To compile this driver as a module, choose M here: the module + will be called pwm-fsl-ftm. + +config PWM_HIBVT + tristate "HiSilicon BVT PWM support" + depends on ARCH_HISI || COMPILE_TEST + help + Generic PWM framework driver for HiSilicon BVT SoCs. + + To compile this driver as a module, choose M here: the module + will be called pwm-hibvt. + +config PWM_IMG + tristate "Imagination Technologies PWM driver" + depends on HAS_IOMEM + depends on MFD_SYSCON + depends on COMMON_CLK + depends on MIPS || COMPILE_TEST + help + Generic PWM framework driver for Imagination Technologies + PWM block which supports 4 channels. + + To compile this driver as a module, choose M here: the module + will be called pwm-img + +config PWM_IMX1 + tristate "i.MX1 PWM support" + depends on ARCH_MXC || COMPILE_TEST + help + Generic PWM framework driver for i.MX1 and i.MX21 + + To compile this driver as a module, choose M here: the module + will be called pwm-imx1. + +config PWM_IMX27 + tristate "i.MX27 PWM support" + depends on ARCH_MXC || COMPILE_TEST + help + Generic PWM framework driver for i.MX27 and later i.MX SoCs. + + To compile this driver as a module, choose M here: the module + will be called pwm-imx27. + +config PWM_IMX_TPM + tristate "i.MX TPM PWM support" + depends on ARCH_MXC || COMPILE_TEST + depends on HAVE_CLK && HAS_IOMEM + help + Generic PWM framework driver for i.MX7ULP TPM module, TPM's full + name is Low Power Timer/Pulse Width Modulation Module. + + To compile this driver as a module, choose M here: the module + will be called pwm-imx-tpm. + +config PWM_IQS620A + tristate "Azoteq IQS620A PWM support" + depends on MFD_IQS62X || COMPILE_TEST + help + Generic PWM framework driver for the Azoteq IQS620A multi-function + sensor. + + To compile this driver as a module, choose M here: the module will + be called pwm-iqs620a. + +config PWM_JZ4740 + tristate "Ingenic JZ47xx PWM support" + depends on MIPS + depends on COMMON_CLK + select MFD_SYSCON + help + Generic PWM framework driver for Ingenic JZ47xx based + machines. + + To compile this driver as a module, choose M here: the module + will be called pwm-jz4740. + +config PWM_LP3943 + tristate "TI/National Semiconductor LP3943 PWM support" + depends on MFD_LP3943 + help + Generic PWM framework driver for LP3943 which supports two PWM + channels. + + To compile this driver as a module, choose M here: the module + will be called pwm-lp3943. + +config PWM_LPC18XX_SCT + tristate "LPC18xx/43xx PWM/SCT support" + depends on ARCH_LPC18XX || COMPILE_TEST + help + Generic PWM framework driver for NXP LPC18xx PWM/SCT which + supports 16 channels. + A maximum of 15 channels can be requested simultaneously and + must have the same period. + + To compile this driver as a module, choose M here: the module + will be called pwm-lpc18xx-sct. + +config PWM_LPC32XX + tristate "LPC32XX PWM support" + depends on ARCH_LPC32XX || COMPILE_TEST + help + Generic PWM framework driver for LPC32XX. The LPC32XX SOC has two + PWM controllers. + + To compile this driver as a module, choose M here: the module + will be called pwm-lpc32xx. + +config PWM_LPSS + tristate + +config PWM_LPSS_PCI + tristate "Intel LPSS PWM PCI driver" + depends on X86 && PCI + select PWM_LPSS + help + The PCI driver for Intel Low Power Subsystem PWM controller. + + To compile this driver as a module, choose M here: the module + will be called pwm-lpss-pci. + +config PWM_LPSS_PLATFORM + tristate "Intel LPSS PWM platform driver" + depends on X86 && ACPI + select PWM_LPSS + help + The platform driver for Intel Low Power Subsystem PWM controller. + + To compile this driver as a module, choose M here: the module + will be called pwm-lpss-platform. + +config PWM_MESON + tristate "Amlogic Meson PWM driver" + depends on ARCH_MESON || COMPILE_TEST + depends on COMMON_CLK + help + The platform driver for Amlogic Meson PWM controller. + + To compile this driver as a module, choose M here: the module + will be called pwm-meson. + +config PWM_MTK_DISP + tristate "MediaTek display PWM driver" + depends on ARCH_MEDIATEK || COMPILE_TEST + depends on HAS_IOMEM + help + Generic PWM framework driver for MediaTek disp-pwm device. + The PWM is used to control the backlight brightness for display. + + To compile this driver as a module, choose M here: the module + will be called pwm-mtk-disp. + +config PWM_MEDIATEK + tristate "MediaTek PWM support" + depends on ARCH_MEDIATEK || RALINK || COMPILE_TEST + help + Generic PWM framework driver for Mediatek ARM SoC. + + To compile this driver as a module, choose M here: the module + will be called pwm-mediatek. + +config PWM_MXS + tristate "Freescale MXS PWM support" + depends on OF + depends on ARCH_MXS || COMPILE_TEST + select STMP_DEVICE + help + Generic PWM framework driver for Freescale MXS. + + To compile this driver as a module, choose M here: the module + will be called pwm-mxs. + +config PWM_OMAP_DMTIMER + tristate "OMAP Dual-Mode Timer PWM support" + depends on OF + depends on OMAP_DM_TIMER || COMPILE_TEST + help + Generic PWM framework driver for OMAP Dual-Mode Timer PWM output + + To compile this driver as a module, choose M here: the module + will be called pwm-omap-dmtimer + +config PWM_PCA9685 + tristate "NXP PCA9685 PWM driver" + depends on I2C + select REGMAP_I2C + help + Generic PWM framework driver for NXP PCA9685 LED controller. + + To compile this driver as a module, choose M here: the module + will be called pwm-pca9685. + +config PWM_PXA + tristate "PXA PWM support" + depends on ARCH_PXA || COMPILE_TEST + help + Generic PWM framework driver for PXA. + + To compile this driver as a module, choose M here: the module + will be called pwm-pxa. + +config PWM_RCAR + tristate "Renesas R-Car PWM support" + depends on ARCH_RENESAS || COMPILE_TEST + depends on HAS_IOMEM + help + This driver exposes the PWM Timer controller found in Renesas + R-Car chips through the PWM API. + + To compile this driver as a module, choose M here: the module + will be called pwm-rcar. + +config PWM_RENESAS_TPU + tristate "Renesas TPU PWM support" + depends on ARCH_RENESAS || COMPILE_TEST + depends on HAS_IOMEM + help + This driver exposes the Timer Pulse Unit (TPU) PWM controller found + in Renesas chips through the PWM API. + + To compile this driver as a module, choose M here: the module + will be called pwm-renesas-tpu. + +config PWM_ROCKCHIP + tristate "Rockchip PWM support" + depends on ARCH_ROCKCHIP || COMPILE_TEST + help + Generic PWM framework driver for the PWM controller found on + Rockchip SoCs. + +config PWM_SAMSUNG + tristate "Samsung PWM support" + depends on PLAT_SAMSUNG || ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST + help + Generic PWM framework driver for Samsung. + + To compile this driver as a module, choose M here: the module + will be called pwm-samsung. + +config PWM_SIFIVE + tristate "SiFive PWM support" + depends on OF + depends on COMMON_CLK + depends on RISCV || COMPILE_TEST + help + Generic PWM framework driver for SiFive SoCs. + + To compile this driver as a module, choose M here: the module + will be called pwm-sifive. + +config PWM_SL28CPLD + tristate "Kontron sl28cpld PWM support" + depends on MFD_SL28CPLD || COMPILE_TEST + help + Generic PWM framework driver for board management controller + found on the Kontron sl28 CPLD. + + To compile this driver as a module, choose M here: the module + will be called pwm-sl28cpld. + +config PWM_SPEAR + tristate "STMicroelectronics SPEAr PWM support" + depends on PLAT_SPEAR || COMPILE_TEST + depends on OF + help + Generic PWM framework driver for the PWM controller on ST + SPEAr SoCs. + + To compile this driver as a module, choose M here: the module + will be called pwm-spear. + +config PWM_SPRD + tristate "Spreadtrum PWM support" + depends on ARCH_SPRD || COMPILE_TEST + depends on HAS_IOMEM + help + Generic PWM framework driver for the PWM controller on + Spreadtrum SoCs. + + To compile this driver as a module, choose M here: the module + will be called pwm-sprd. + +config PWM_STI + tristate "STiH4xx PWM support" + depends on ARCH_STI || COMPILE_TEST + depends on OF + help + Generic PWM framework driver for STiH4xx SoCs. + + To compile this driver as a module, choose M here: the module + will be called pwm-sti. + +config PWM_STM32 + tristate "STMicroelectronics STM32 PWM" + depends on MFD_STM32_TIMERS || COMPILE_TEST + help + Generic PWM framework driver for STM32 SoCs. + + To compile this driver as a module, choose M here: the module + will be called pwm-stm32. + +config PWM_STM32_LP + tristate "STMicroelectronics STM32 PWM LP" + depends on MFD_STM32_LPTIMER || COMPILE_TEST + help + Generic PWM framework driver for STMicroelectronics STM32 SoCs + with Low-Power Timer (LPTIM). + + To compile this driver as a module, choose M here: the module + will be called pwm-stm32-lp. + +config PWM_STMPE + bool "STMPE expander PWM export" + depends on MFD_STMPE + help + This enables support for the PWMs found in the STMPE I/O + expanders. + +config PWM_SUN4I + tristate "Allwinner PWM support" + depends on ARCH_SUNXI || COMPILE_TEST + depends on HAS_IOMEM && COMMON_CLK + help + Generic PWM framework driver for Allwinner SoCs. + + To compile this driver as a module, choose M here: the module + will be called pwm-sun4i. + +config PWM_TEGRA + tristate "NVIDIA Tegra PWM support" + depends on ARCH_TEGRA || COMPILE_TEST + help + Generic PWM framework driver for the PWFM controller found on NVIDIA + Tegra SoCs. + + To compile this driver as a module, choose M here: the module + will be called pwm-tegra. + +config PWM_TIECAP + tristate "ECAP PWM support" + depends on ARCH_OMAP2PLUS || ARCH_DAVINCI_DA8XX || ARCH_KEYSTONE || ARCH_K3 || COMPILE_TEST + help + PWM driver support for the ECAP APWM controller found on TI SOCs + + To compile this driver as a module, choose M here: the module + will be called pwm-tiecap. + +config PWM_TIEHRPWM + tristate "EHRPWM PWM support" + depends on ARCH_OMAP2PLUS || ARCH_DAVINCI_DA8XX || ARCH_K3 || COMPILE_TEST + help + PWM driver support for the EHRPWM controller found on TI SOCs + + To compile this driver as a module, choose M here: the module + will be called pwm-tiehrpwm. + +config PWM_TWL + tristate "TWL4030/6030 PWM support" + depends on TWL4030_CORE + help + Generic PWM framework driver for TWL4030/6030. + + To compile this driver as a module, choose M here: the module + will be called pwm-twl. + +config PWM_TWL_LED + tristate "TWL4030/6030 PWM support for LED drivers" + depends on TWL4030_CORE + help + Generic PWM framework driver for TWL4030/6030 LED terminals. + + To compile this driver as a module, choose M here: the module + will be called pwm-twl-led. + +config PWM_VT8500 + tristate "vt8500 PWM support" + depends on ARCH_VT8500 || COMPILE_TEST + help + Generic PWM framework driver for vt8500. + + To compile this driver as a module, choose M here: the module + will be called pwm-vt8500. + +config PWM_ZX + tristate "ZTE ZX PWM support" + depends on ARCH_ZX || COMPILE_TEST + help + Generic PWM framework driver for ZTE ZX family SoCs. + + To compile this driver as a module, choose M here: the module + will be called pwm-zx. + +endif |