diff options
Diffstat (limited to 'drivers/rapidio/switches/tsi57x.c')
| -rw-r--r-- | drivers/rapidio/switches/tsi57x.c | 365 |
1 files changed, 365 insertions, 0 deletions
diff --git a/drivers/rapidio/switches/tsi57x.c b/drivers/rapidio/switches/tsi57x.c new file mode 100644 index 000000000..271762046 --- /dev/null +++ b/drivers/rapidio/switches/tsi57x.c @@ -0,0 +1,365 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * RapidIO Tsi57x switch family support + * + * Copyright 2009-2010 Integrated Device Technology, Inc. + * Alexandre Bounine <alexandre.bounine@idt.com> + * - Added EM support + * - Modified switch operations initialization. + * + * Copyright 2005 MontaVista Software, Inc. + * Matt Porter <mporter@kernel.crashing.org> + */ + +#include <linux/rio.h> +#include <linux/rio_drv.h> +#include <linux/rio_ids.h> +#include <linux/delay.h> +#include <linux/module.h> +#include "../rio.h" + +/* Global (broadcast) route registers */ +#define SPBC_ROUTE_CFG_DESTID 0x10070 +#define SPBC_ROUTE_CFG_PORT 0x10074 + +/* Per port route registers */ +#define SPP_ROUTE_CFG_DESTID(n) (0x11070 + 0x100*n) +#define SPP_ROUTE_CFG_PORT(n) (0x11074 + 0x100*n) + +#define TSI578_SP_MODE(n) (0x11004 + n*0x100) +#define TSI578_SP_MODE_GLBL 0x10004 +#define TSI578_SP_MODE_PW_DIS 0x08000000 +#define TSI578_SP_MODE_LUT_512 0x01000000 + +#define TSI578_SP_CTL_INDEP(n) (0x13004 + n*0x100) +#define TSI578_SP_LUT_PEINF(n) (0x13010 + n*0x100) +#define TSI578_SP_CS_TX(n) (0x13014 + n*0x100) +#define TSI578_SP_INT_STATUS(n) (0x13018 + n*0x100) + +#define TSI578_GLBL_ROUTE_BASE 0x10078 + +static int +tsi57x_route_add_entry(struct rio_mport *mport, u16 destid, u8 hopcount, + u16 table, u16 route_destid, u8 route_port) +{ + if (table == RIO_GLOBAL_TABLE) { + rio_mport_write_config_32(mport, destid, hopcount, + SPBC_ROUTE_CFG_DESTID, route_destid); + rio_mport_write_config_32(mport, destid, hopcount, + SPBC_ROUTE_CFG_PORT, route_port); + } else { + rio_mport_write_config_32(mport, destid, hopcount, + SPP_ROUTE_CFG_DESTID(table), route_destid); + rio_mport_write_config_32(mport, destid, hopcount, + SPP_ROUTE_CFG_PORT(table), route_port); + } + + udelay(10); + + return 0; +} + +static int +tsi57x_route_get_entry(struct rio_mport *mport, u16 destid, u8 hopcount, + u16 table, u16 route_destid, u8 *route_port) +{ + int ret = 0; + u32 result; + + if (table == RIO_GLOBAL_TABLE) { + /* Use local RT of the ingress port to avoid possible + race condition */ + rio_mport_read_config_32(mport, destid, hopcount, + RIO_SWP_INFO_CAR, &result); + table = (result & RIO_SWP_INFO_PORT_NUM_MASK); + } + + rio_mport_write_config_32(mport, destid, hopcount, + SPP_ROUTE_CFG_DESTID(table), route_destid); + rio_mport_read_config_32(mport, destid, hopcount, + SPP_ROUTE_CFG_PORT(table), &result); + + *route_port = (u8)result; + if (*route_port > 15) + ret = -1; + + return ret; +} + +static int +tsi57x_route_clr_table(struct rio_mport *mport, u16 destid, u8 hopcount, + u16 table) +{ + u32 route_idx; + u32 lut_size; + + lut_size = (mport->sys_size) ? 0x1ff : 0xff; + + if (table == RIO_GLOBAL_TABLE) { + rio_mport_write_config_32(mport, destid, hopcount, + SPBC_ROUTE_CFG_DESTID, 0x80000000); + for (route_idx = 0; route_idx <= lut_size; route_idx++) + rio_mport_write_config_32(mport, destid, hopcount, + SPBC_ROUTE_CFG_PORT, + RIO_INVALID_ROUTE); + } else { + rio_mport_write_config_32(mport, destid, hopcount, + SPP_ROUTE_CFG_DESTID(table), 0x80000000); + for (route_idx = 0; route_idx <= lut_size; route_idx++) + rio_mport_write_config_32(mport, destid, hopcount, + SPP_ROUTE_CFG_PORT(table) , RIO_INVALID_ROUTE); + } + + return 0; +} + +static int +tsi57x_set_domain(struct rio_mport *mport, u16 destid, u8 hopcount, + u8 sw_domain) +{ + u32 regval; + + /* + * Switch domain configuration operates only at global level + */ + + /* Turn off flat (LUT_512) mode */ + rio_mport_read_config_32(mport, destid, hopcount, + TSI578_SP_MODE_GLBL, ®val); + rio_mport_write_config_32(mport, destid, hopcount, TSI578_SP_MODE_GLBL, + regval & ~TSI578_SP_MODE_LUT_512); + /* Set switch domain base */ + rio_mport_write_config_32(mport, destid, hopcount, + TSI578_GLBL_ROUTE_BASE, + (u32)(sw_domain << 24)); + return 0; +} + +static int +tsi57x_get_domain(struct rio_mport *mport, u16 destid, u8 hopcount, + u8 *sw_domain) +{ + u32 regval; + + /* + * Switch domain configuration operates only at global level + */ + rio_mport_read_config_32(mport, destid, hopcount, + TSI578_GLBL_ROUTE_BASE, ®val); + + *sw_domain = (u8)(regval >> 24); + + return 0; +} + +static int +tsi57x_em_init(struct rio_dev *rdev) +{ + u32 regval; + int portnum; + + pr_debug("TSI578 %s [%d:%d]\n", __func__, rdev->destid, rdev->hopcount); + + for (portnum = 0; + portnum < RIO_GET_TOTAL_PORTS(rdev->swpinfo); portnum++) { + /* Make sure that Port-Writes are enabled (for all ports) */ + rio_read_config_32(rdev, + TSI578_SP_MODE(portnum), ®val); + rio_write_config_32(rdev, + TSI578_SP_MODE(portnum), + regval & ~TSI578_SP_MODE_PW_DIS); + + /* Clear all pending interrupts */ + rio_read_config_32(rdev, + RIO_DEV_PORT_N_ERR_STS_CSR(rdev, portnum), + ®val); + rio_write_config_32(rdev, + RIO_DEV_PORT_N_ERR_STS_CSR(rdev, portnum), + regval & 0x07120214); + + rio_read_config_32(rdev, + TSI578_SP_INT_STATUS(portnum), ®val); + rio_write_config_32(rdev, + TSI578_SP_INT_STATUS(portnum), + regval & 0x000700bd); + + /* Enable all interrupts to allow ports to send a port-write */ + rio_read_config_32(rdev, + TSI578_SP_CTL_INDEP(portnum), ®val); + rio_write_config_32(rdev, + TSI578_SP_CTL_INDEP(portnum), + regval | 0x000b0000); + + /* Skip next (odd) port if the current port is in x4 mode */ + rio_read_config_32(rdev, + RIO_DEV_PORT_N_CTL_CSR(rdev, portnum), + ®val); + if ((regval & RIO_PORT_N_CTL_PWIDTH) == RIO_PORT_N_CTL_PWIDTH_4) + portnum++; + } + + /* set TVAL = ~50us */ + rio_write_config_32(rdev, + rdev->phys_efptr + RIO_PORT_LINKTO_CTL_CSR, 0x9a << 8); + + return 0; +} + +static int +tsi57x_em_handler(struct rio_dev *rdev, u8 portnum) +{ + struct rio_mport *mport = rdev->net->hport; + u32 intstat, err_status; + int sendcount, checkcount; + u8 route_port; + u32 regval; + + rio_read_config_32(rdev, + RIO_DEV_PORT_N_ERR_STS_CSR(rdev, portnum), + &err_status); + + if ((err_status & RIO_PORT_N_ERR_STS_PORT_OK) && + (err_status & (RIO_PORT_N_ERR_STS_OUT_ES | + RIO_PORT_N_ERR_STS_INP_ES))) { + /* Remove any queued packets by locking/unlocking port */ + rio_read_config_32(rdev, + RIO_DEV_PORT_N_CTL_CSR(rdev, portnum), + ®val); + if (!(regval & RIO_PORT_N_CTL_LOCKOUT)) { + rio_write_config_32(rdev, + RIO_DEV_PORT_N_CTL_CSR(rdev, portnum), + regval | RIO_PORT_N_CTL_LOCKOUT); + udelay(50); + rio_write_config_32(rdev, + RIO_DEV_PORT_N_CTL_CSR(rdev, portnum), + regval); + } + + /* Read from link maintenance response register to clear + * valid bit + */ + rio_read_config_32(rdev, + RIO_DEV_PORT_N_MNT_RSP_CSR(rdev, portnum), + ®val); + + /* Send a Packet-Not-Accepted/Link-Request-Input-Status control + * symbol to recover from IES/OES + */ + sendcount = 3; + while (sendcount) { + rio_write_config_32(rdev, + TSI578_SP_CS_TX(portnum), 0x40fc8000); + checkcount = 3; + while (checkcount--) { + udelay(50); + rio_read_config_32(rdev, + RIO_DEV_PORT_N_MNT_RSP_CSR(rdev, + portnum), + ®val); + if (regval & RIO_PORT_N_MNT_RSP_RVAL) + goto exit_es; + } + + sendcount--; + } + } + +exit_es: + /* Clear implementation specific error status bits */ + rio_read_config_32(rdev, TSI578_SP_INT_STATUS(portnum), &intstat); + pr_debug("TSI578[%x:%x] SP%d_INT_STATUS=0x%08x\n", + rdev->destid, rdev->hopcount, portnum, intstat); + + if (intstat & 0x10000) { + rio_read_config_32(rdev, + TSI578_SP_LUT_PEINF(portnum), ®val); + regval = (mport->sys_size) ? (regval >> 16) : (regval >> 24); + route_port = rdev->rswitch->route_table[regval]; + pr_debug("RIO: TSI578[%s] P%d LUT Parity Error (destID=%d)\n", + rio_name(rdev), portnum, regval); + tsi57x_route_add_entry(mport, rdev->destid, rdev->hopcount, + RIO_GLOBAL_TABLE, regval, route_port); + } + + rio_write_config_32(rdev, TSI578_SP_INT_STATUS(portnum), + intstat & 0x000700bd); + + return 0; +} + +static struct rio_switch_ops tsi57x_switch_ops = { + .owner = THIS_MODULE, + .add_entry = tsi57x_route_add_entry, + .get_entry = tsi57x_route_get_entry, + .clr_table = tsi57x_route_clr_table, + .set_domain = tsi57x_set_domain, + .get_domain = tsi57x_get_domain, + .em_init = tsi57x_em_init, + .em_handle = tsi57x_em_handler, +}; + +static int tsi57x_probe(struct rio_dev *rdev, const struct rio_device_id *id) +{ + pr_debug("RIO: %s for %s\n", __func__, rio_name(rdev)); + + spin_lock(&rdev->rswitch->lock); + + if (rdev->rswitch->ops) { + spin_unlock(&rdev->rswitch->lock); + return -EINVAL; + } + rdev->rswitch->ops = &tsi57x_switch_ops; + + if (rdev->do_enum) { + /* Ensure that default routing is disabled on startup */ + rio_write_config_32(rdev, RIO_STD_RTE_DEFAULT_PORT, + RIO_INVALID_ROUTE); + } + + spin_unlock(&rdev->rswitch->lock); + return 0; +} + +static void tsi57x_remove(struct rio_dev *rdev) +{ + pr_debug("RIO: %s for %s\n", __func__, rio_name(rdev)); + spin_lock(&rdev->rswitch->lock); + if (rdev->rswitch->ops != &tsi57x_switch_ops) { + spin_unlock(&rdev->rswitch->lock); + return; + } + rdev->rswitch->ops = NULL; + spin_unlock(&rdev->rswitch->lock); +} + +static const struct rio_device_id tsi57x_id_table[] = { + {RIO_DEVICE(RIO_DID_TSI572, RIO_VID_TUNDRA)}, + {RIO_DEVICE(RIO_DID_TSI574, RIO_VID_TUNDRA)}, + {RIO_DEVICE(RIO_DID_TSI577, RIO_VID_TUNDRA)}, + {RIO_DEVICE(RIO_DID_TSI578, RIO_VID_TUNDRA)}, + { 0, } /* terminate list */ +}; + +static struct rio_driver tsi57x_driver = { + .name = "tsi57x", + .id_table = tsi57x_id_table, + .probe = tsi57x_probe, + .remove = tsi57x_remove, +}; + +static int __init tsi57x_init(void) +{ + return rio_register_driver(&tsi57x_driver); +} + +static void __exit tsi57x_exit(void) +{ + rio_unregister_driver(&tsi57x_driver); +} + +device_initcall(tsi57x_init); +module_exit(tsi57x_exit); + +MODULE_DESCRIPTION("IDT Tsi57x Serial RapidIO switch family driver"); +MODULE_AUTHOR("Integrated Device Technology, Inc."); +MODULE_LICENSE("GPL"); |