diff options
Diffstat (limited to 'drivers/regulator/lm363x-regulator.c')
-rw-r--r-- | drivers/regulator/lm363x-regulator.c | 366 |
1 files changed, 366 insertions, 0 deletions
diff --git a/drivers/regulator/lm363x-regulator.c b/drivers/regulator/lm363x-regulator.c new file mode 100644 index 000000000..4b9f618b0 --- /dev/null +++ b/drivers/regulator/lm363x-regulator.c @@ -0,0 +1,366 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * TI LM363X Regulator Driver + * + * Copyright 2015 Texas Instruments + * + * Author: Milo Kim <milo.kim@ti.com> + */ + +#include <linux/err.h> +#include <linux/kernel.h> +#include <linux/mfd/ti-lmu.h> +#include <linux/mfd/ti-lmu-register.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/gpio/consumer.h> +#include <linux/platform_device.h> +#include <linux/regulator/driver.h> +#include <linux/regulator/of_regulator.h> +#include <linux/slab.h> + +/* LM3631 */ +#define LM3631_BOOST_VSEL_MAX 0x25 +#define LM3631_LDO_VSEL_MAX 0x28 +#define LM3631_CONT_VSEL_MAX 0x03 +#define LM3631_VBOOST_MIN 4500000 +#define LM3631_VCONT_MIN 1800000 +#define LM3631_VLDO_MIN 4000000 +#define ENABLE_TIME_USEC 1000 + +/* LM3632 */ +#define LM3632_BOOST_VSEL_MAX 0x26 +#define LM3632_LDO_VSEL_MAX 0x28 +#define LM3632_VBOOST_MIN 4500000 +#define LM3632_VLDO_MIN 4000000 + +/* LM36274 */ +#define LM36274_BOOST_VSEL_MAX 0x3f +#define LM36274_LDO_VSEL_MAX 0x32 +#define LM36274_VOLTAGE_MIN 4000000 + +/* Common */ +#define LM363X_STEP_50mV 50000 +#define LM363X_STEP_500mV 500000 + +static const int ldo_cont_enable_time[] = { + 0, 2000, 5000, 10000, 20000, 50000, 100000, 200000, +}; + +static int lm363x_regulator_enable_time(struct regulator_dev *rdev) +{ + enum lm363x_regulator_id id = rdev_get_id(rdev); + unsigned int val, addr, mask; + + switch (id) { + case LM3631_LDO_CONT: + addr = LM3631_REG_ENTIME_VCONT; + mask = LM3631_ENTIME_CONT_MASK; + break; + case LM3631_LDO_OREF: + addr = LM3631_REG_ENTIME_VOREF; + mask = LM3631_ENTIME_MASK; + break; + case LM3631_LDO_POS: + addr = LM3631_REG_ENTIME_VPOS; + mask = LM3631_ENTIME_MASK; + break; + case LM3631_LDO_NEG: + addr = LM3631_REG_ENTIME_VNEG; + mask = LM3631_ENTIME_MASK; + break; + default: + return 0; + } + + if (regmap_read(rdev->regmap, addr, &val)) + return -EINVAL; + + val = (val & mask) >> LM3631_ENTIME_SHIFT; + + if (id == LM3631_LDO_CONT) + return ldo_cont_enable_time[val]; + else + return ENABLE_TIME_USEC * val; +} + +static const struct regulator_ops lm363x_boost_voltage_table_ops = { + .list_voltage = regulator_list_voltage_linear, + .set_voltage_sel = regulator_set_voltage_sel_regmap, + .get_voltage_sel = regulator_get_voltage_sel_regmap, +}; + +static const struct regulator_ops lm363x_regulator_voltage_table_ops = { + .list_voltage = regulator_list_voltage_linear, + .set_voltage_sel = regulator_set_voltage_sel_regmap, + .get_voltage_sel = regulator_get_voltage_sel_regmap, + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .is_enabled = regulator_is_enabled_regmap, + .enable_time = lm363x_regulator_enable_time, +}; + +static const struct regulator_desc lm363x_regulator_desc[] = { + /* LM3631 */ + { + .name = "vboost", + .of_match = "vboost", + .id = LM3631_BOOST, + .ops = &lm363x_boost_voltage_table_ops, + .n_voltages = LM3631_BOOST_VSEL_MAX + 1, + .min_uV = LM3631_VBOOST_MIN, + .uV_step = LM363X_STEP_50mV, + .type = REGULATOR_VOLTAGE, + .owner = THIS_MODULE, + .vsel_reg = LM3631_REG_VOUT_BOOST, + .vsel_mask = LM3631_VOUT_MASK, + }, + { + .name = "ldo_cont", + .of_match = "vcont", + .id = LM3631_LDO_CONT, + .ops = &lm363x_regulator_voltage_table_ops, + .n_voltages = LM3631_CONT_VSEL_MAX + 1, + .min_uV = LM3631_VCONT_MIN, + .uV_step = LM363X_STEP_500mV, + .type = REGULATOR_VOLTAGE, + .owner = THIS_MODULE, + .vsel_reg = LM3631_REG_VOUT_CONT, + .vsel_mask = LM3631_VOUT_CONT_MASK, + .enable_reg = LM3631_REG_LDO_CTRL2, + .enable_mask = LM3631_EN_CONT_MASK, + }, + { + .name = "ldo_oref", + .of_match = "voref", + .id = LM3631_LDO_OREF, + .ops = &lm363x_regulator_voltage_table_ops, + .n_voltages = LM3631_LDO_VSEL_MAX + 1, + .min_uV = LM3631_VLDO_MIN, + .uV_step = LM363X_STEP_50mV, + .type = REGULATOR_VOLTAGE, + .owner = THIS_MODULE, + .vsel_reg = LM3631_REG_VOUT_OREF, + .vsel_mask = LM3631_VOUT_MASK, + .enable_reg = LM3631_REG_LDO_CTRL1, + .enable_mask = LM3631_EN_OREF_MASK, + }, + { + .name = "ldo_vpos", + .of_match = "vpos", + .id = LM3631_LDO_POS, + .ops = &lm363x_regulator_voltage_table_ops, + .n_voltages = LM3631_LDO_VSEL_MAX + 1, + .min_uV = LM3631_VLDO_MIN, + .uV_step = LM363X_STEP_50mV, + .type = REGULATOR_VOLTAGE, + .owner = THIS_MODULE, + .vsel_reg = LM3631_REG_VOUT_POS, + .vsel_mask = LM3631_VOUT_MASK, + .enable_reg = LM3631_REG_LDO_CTRL1, + .enable_mask = LM3631_EN_VPOS_MASK, + }, + { + .name = "ldo_vneg", + .of_match = "vneg", + .id = LM3631_LDO_NEG, + .ops = &lm363x_regulator_voltage_table_ops, + .n_voltages = LM3631_LDO_VSEL_MAX + 1, + .min_uV = LM3631_VLDO_MIN, + .uV_step = LM363X_STEP_50mV, + .type = REGULATOR_VOLTAGE, + .owner = THIS_MODULE, + .vsel_reg = LM3631_REG_VOUT_NEG, + .vsel_mask = LM3631_VOUT_MASK, + .enable_reg = LM3631_REG_LDO_CTRL1, + .enable_mask = LM3631_EN_VNEG_MASK, + }, + /* LM3632 */ + { + .name = "vboost", + .of_match = "vboost", + .id = LM3632_BOOST, + .ops = &lm363x_boost_voltage_table_ops, + .n_voltages = LM3632_BOOST_VSEL_MAX + 1, + .min_uV = LM3632_VBOOST_MIN, + .uV_step = LM363X_STEP_50mV, + .type = REGULATOR_VOLTAGE, + .owner = THIS_MODULE, + .vsel_reg = LM3632_REG_VOUT_BOOST, + .vsel_mask = LM3632_VOUT_MASK, + }, + { + .name = "ldo_vpos", + .of_match = "vpos", + .id = LM3632_LDO_POS, + .ops = &lm363x_regulator_voltage_table_ops, + .n_voltages = LM3632_LDO_VSEL_MAX + 1, + .min_uV = LM3632_VLDO_MIN, + .uV_step = LM363X_STEP_50mV, + .type = REGULATOR_VOLTAGE, + .owner = THIS_MODULE, + .vsel_reg = LM3632_REG_VOUT_POS, + .vsel_mask = LM3632_VOUT_MASK, + .enable_reg = LM3632_REG_BIAS_CONFIG, + .enable_mask = LM3632_EN_VPOS_MASK, + }, + { + .name = "ldo_vneg", + .of_match = "vneg", + .id = LM3632_LDO_NEG, + .ops = &lm363x_regulator_voltage_table_ops, + .n_voltages = LM3632_LDO_VSEL_MAX + 1, + .min_uV = LM3632_VLDO_MIN, + .uV_step = LM363X_STEP_50mV, + .type = REGULATOR_VOLTAGE, + .owner = THIS_MODULE, + .vsel_reg = LM3632_REG_VOUT_NEG, + .vsel_mask = LM3632_VOUT_MASK, + .enable_reg = LM3632_REG_BIAS_CONFIG, + .enable_mask = LM3632_EN_VNEG_MASK, + }, + + /* LM36274 */ + { + .name = "vboost", + .of_match = "vboost", + .id = LM36274_BOOST, + .ops = &lm363x_boost_voltage_table_ops, + .n_voltages = LM36274_BOOST_VSEL_MAX + 1, + .min_uV = LM36274_VOLTAGE_MIN, + .uV_step = LM363X_STEP_50mV, + .type = REGULATOR_VOLTAGE, + .owner = THIS_MODULE, + .vsel_reg = LM36274_REG_VOUT_BOOST, + .vsel_mask = LM36274_VOUT_MASK, + }, + { + .name = "ldo_vpos", + .of_match = "vpos", + .id = LM36274_LDO_POS, + .ops = &lm363x_regulator_voltage_table_ops, + .n_voltages = LM36274_LDO_VSEL_MAX + 1, + .min_uV = LM36274_VOLTAGE_MIN, + .uV_step = LM363X_STEP_50mV, + .type = REGULATOR_VOLTAGE, + .owner = THIS_MODULE, + .vsel_reg = LM36274_REG_VOUT_POS, + .vsel_mask = LM36274_VOUT_MASK, + .enable_reg = LM36274_REG_BIAS_CONFIG_1, + .enable_mask = LM36274_EN_VPOS_MASK, + }, + { + .name = "ldo_vneg", + .of_match = "vneg", + .id = LM36274_LDO_NEG, + .ops = &lm363x_regulator_voltage_table_ops, + .n_voltages = LM36274_LDO_VSEL_MAX + 1, + .min_uV = LM36274_VOLTAGE_MIN, + .uV_step = LM363X_STEP_50mV, + .type = REGULATOR_VOLTAGE, + .owner = THIS_MODULE, + .vsel_reg = LM36274_REG_VOUT_NEG, + .vsel_mask = LM36274_VOUT_MASK, + .enable_reg = LM36274_REG_BIAS_CONFIG_1, + .enable_mask = LM36274_EN_VNEG_MASK, + }, +}; + +static struct gpio_desc *lm363x_regulator_of_get_enable_gpio(struct device *dev, int id) +{ + /* + * Check LCM_EN1/2_GPIO is configured. + * Those pins are used for enabling VPOS/VNEG LDOs. + * Do not use devm* here: the regulator core takes over the + * lifecycle management of the GPIO descriptor. + */ + switch (id) { + case LM3632_LDO_POS: + case LM36274_LDO_POS: + return gpiod_get_index_optional(dev, "enable", 0, + GPIOD_OUT_LOW | GPIOD_FLAGS_BIT_NONEXCLUSIVE); + case LM3632_LDO_NEG: + case LM36274_LDO_NEG: + return gpiod_get_index_optional(dev, "enable", 1, + GPIOD_OUT_LOW | GPIOD_FLAGS_BIT_NONEXCLUSIVE); + default: + return NULL; + } +} + +static int lm363x_regulator_set_ext_en(struct regmap *regmap, int id) +{ + int ext_en_mask = 0; + + switch (id) { + case LM3632_LDO_POS: + case LM3632_LDO_NEG: + ext_en_mask = LM3632_EXT_EN_MASK; + break; + case LM36274_LDO_POS: + case LM36274_LDO_NEG: + ext_en_mask = LM36274_EXT_EN_MASK; + break; + default: + return -ENODEV; + } + + return regmap_update_bits(regmap, lm363x_regulator_desc[id].enable_reg, + ext_en_mask, ext_en_mask); +} + +static int lm363x_regulator_probe(struct platform_device *pdev) +{ + struct ti_lmu *lmu = dev_get_drvdata(pdev->dev.parent); + struct regmap *regmap = lmu->regmap; + struct regulator_config cfg = { }; + struct regulator_dev *rdev; + struct device *dev = &pdev->dev; + int id = pdev->id; + struct gpio_desc *gpiod; + int ret; + + cfg.dev = dev; + cfg.regmap = regmap; + + /* + * LM3632 LDOs can be controlled by external pin. + * Register update is required if the pin is used. + */ + gpiod = lm363x_regulator_of_get_enable_gpio(dev, id); + if (IS_ERR(gpiod)) + return PTR_ERR(gpiod); + + if (gpiod) { + cfg.ena_gpiod = gpiod; + ret = lm363x_regulator_set_ext_en(regmap, id); + if (ret) { + gpiod_put(gpiod); + dev_err(dev, "External pin err: %d\n", ret); + return ret; + } + } + + rdev = devm_regulator_register(dev, &lm363x_regulator_desc[id], &cfg); + if (IS_ERR(rdev)) { + ret = PTR_ERR(rdev); + dev_err(dev, "[%d] regulator register err: %d\n", id, ret); + return ret; + } + + return 0; +} + +static struct platform_driver lm363x_regulator_driver = { + .probe = lm363x_regulator_probe, + .driver = { + .name = "lm363x-regulator", + }, +}; + +module_platform_driver(lm363x_regulator_driver); + +MODULE_DESCRIPTION("TI LM363X Regulator Driver"); +MODULE_AUTHOR("Milo Kim"); +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("platform:lm363x-regulator"); |