diff options
Diffstat (limited to 'drivers/regulator/rc5t583-regulator.c')
| -rw-r--r-- | drivers/regulator/rc5t583-regulator.c | 171 |
1 files changed, 171 insertions, 0 deletions
diff --git a/drivers/regulator/rc5t583-regulator.c b/drivers/regulator/rc5t583-regulator.c new file mode 100644 index 000000000..62641b08b --- /dev/null +++ b/drivers/regulator/rc5t583-regulator.c @@ -0,0 +1,171 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Regulator driver for RICOH RC5T583 power management chip. + * + * Copyright (c) 2011-2012, NVIDIA CORPORATION. All rights reserved. + * Author: Laxman dewangan <ldewangan@nvidia.com> + * + * based on code + * Copyright (C) 2011 RICOH COMPANY,LTD + */ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/slab.h> +#include <linux/err.h> +#include <linux/platform_device.h> +#include <linux/regulator/driver.h> +#include <linux/regulator/machine.h> +#include <linux/gpio.h> +#include <linux/mfd/rc5t583.h> + +struct rc5t583_regulator_info { + int deepsleep_id; + + /* Regulator register address.*/ + uint8_t reg_disc_reg; + uint8_t disc_bit; + uint8_t deepsleep_reg; + + /* Regulator specific turn-on delay and voltage settling time*/ + int enable_uv_per_us; + + /* Used by regulator core */ + struct regulator_desc desc; +}; + +static int rc5t583_regulator_enable_time(struct regulator_dev *rdev) +{ + struct rc5t583_regulator_info *reg_info = rdev_get_drvdata(rdev); + int vsel = regulator_get_voltage_sel_regmap(rdev); + int curr_uV = regulator_list_voltage_linear(rdev, vsel); + + return DIV_ROUND_UP(curr_uV, reg_info->enable_uv_per_us); +} + +static const struct regulator_ops rc5t583_ops = { + .is_enabled = regulator_is_enabled_regmap, + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .enable_time = rc5t583_regulator_enable_time, + .get_voltage_sel = regulator_get_voltage_sel_regmap, + .set_voltage_sel = regulator_set_voltage_sel_regmap, + .list_voltage = regulator_list_voltage_linear, + .map_voltage = regulator_map_voltage_linear, + .set_voltage_time_sel = regulator_set_voltage_time_sel, +}; + +#define RC5T583_REG(_id, _en_reg, _en_bit, _disc_reg, _disc_bit, \ + _vout_mask, _min_mv, _max_mv, _step_uV, _enable_mv) \ +{ \ + .reg_disc_reg = RC5T583_REG_##_disc_reg, \ + .disc_bit = _disc_bit, \ + .deepsleep_reg = RC5T583_REG_##_id##DAC_DS, \ + .enable_uv_per_us = _enable_mv * 1000, \ + .deepsleep_id = RC5T583_DS_##_id, \ + .desc = { \ + .name = "rc5t583-regulator-"#_id, \ + .id = RC5T583_REGULATOR_##_id, \ + .n_voltages = (_max_mv - _min_mv) * 1000 / _step_uV + 1, \ + .ops = &rc5t583_ops, \ + .type = REGULATOR_VOLTAGE, \ + .owner = THIS_MODULE, \ + .vsel_reg = RC5T583_REG_##_id##DAC, \ + .vsel_mask = _vout_mask, \ + .enable_reg = RC5T583_REG_##_en_reg, \ + .enable_mask = BIT(_en_bit), \ + .min_uV = _min_mv * 1000, \ + .uV_step = _step_uV, \ + .ramp_delay = 40 * 1000, \ + }, \ +} + +static struct rc5t583_regulator_info rc5t583_reg_info[RC5T583_REGULATOR_MAX] = { + RC5T583_REG(DC0, DC0CTL, 0, DC0CTL, 1, 0x7F, 700, 1500, 12500, 4), + RC5T583_REG(DC1, DC1CTL, 0, DC1CTL, 1, 0x7F, 700, 1500, 12500, 14), + RC5T583_REG(DC2, DC2CTL, 0, DC2CTL, 1, 0x7F, 900, 2400, 12500, 14), + RC5T583_REG(DC3, DC3CTL, 0, DC3CTL, 1, 0x7F, 900, 2400, 12500, 14), + RC5T583_REG(LDO0, LDOEN2, 0, LDODIS2, 0, 0x7F, 900, 3400, 25000, 160), + RC5T583_REG(LDO1, LDOEN2, 1, LDODIS2, 1, 0x7F, 900, 3400, 25000, 160), + RC5T583_REG(LDO2, LDOEN2, 2, LDODIS2, 2, 0x7F, 900, 3400, 25000, 160), + RC5T583_REG(LDO3, LDOEN2, 3, LDODIS2, 3, 0x7F, 900, 3400, 25000, 160), + RC5T583_REG(LDO4, LDOEN2, 4, LDODIS2, 4, 0x3F, 750, 1500, 12500, 133), + RC5T583_REG(LDO5, LDOEN2, 5, LDODIS2, 5, 0x7F, 900, 3400, 25000, 267), + RC5T583_REG(LDO6, LDOEN2, 6, LDODIS2, 6, 0x7F, 900, 3400, 25000, 133), + RC5T583_REG(LDO7, LDOEN2, 7, LDODIS2, 7, 0x7F, 900, 3400, 25000, 233), + RC5T583_REG(LDO8, LDOEN1, 0, LDODIS1, 0, 0x7F, 900, 3400, 25000, 233), + RC5T583_REG(LDO9, LDOEN1, 1, LDODIS1, 1, 0x7F, 900, 3400, 25000, 133), +}; + +static int rc5t583_regulator_probe(struct platform_device *pdev) +{ + struct rc5t583 *rc5t583 = dev_get_drvdata(pdev->dev.parent); + struct rc5t583_platform_data *pdata = dev_get_platdata(rc5t583->dev); + struct regulator_config config = { }; + struct regulator_dev *rdev; + struct rc5t583_regulator_info *ri; + int ret; + int id; + + if (!pdata) { + dev_err(&pdev->dev, "No platform data, exiting...\n"); + return -ENODEV; + } + + for (id = 0; id < RC5T583_REGULATOR_MAX; ++id) { + ri = &rc5t583_reg_info[id]; + + if (ri->deepsleep_id == RC5T583_DS_NONE) + goto skip_ext_pwr_config; + + ret = rc5t583_ext_power_req_config(rc5t583->dev, + ri->deepsleep_id, + pdata->regulator_ext_pwr_control[id], + pdata->regulator_deepsleep_slot[id]); + /* + * Configuring external control is not a major issue, + * just give warning. + */ + if (ret < 0) + dev_warn(&pdev->dev, + "Failed to configure ext control %d\n", id); + +skip_ext_pwr_config: + config.dev = &pdev->dev; + config.init_data = pdata->reg_init_data[id]; + config.driver_data = ri; + config.regmap = rc5t583->regmap; + + rdev = devm_regulator_register(&pdev->dev, &ri->desc, &config); + if (IS_ERR(rdev)) { + dev_err(&pdev->dev, "Failed to register regulator %s\n", + ri->desc.name); + return PTR_ERR(rdev); + } + } + return 0; +} + +static struct platform_driver rc5t583_regulator_driver = { + .driver = { + .name = "rc5t583-regulator", + }, + .probe = rc5t583_regulator_probe, +}; + +static int __init rc5t583_regulator_init(void) +{ + return platform_driver_register(&rc5t583_regulator_driver); +} +subsys_initcall(rc5t583_regulator_init); + +static void __exit rc5t583_regulator_exit(void) +{ + platform_driver_unregister(&rc5t583_regulator_driver); +} +module_exit(rc5t583_regulator_exit); + +MODULE_AUTHOR("Laxman Dewangan <ldewangan@nvidia.com>"); +MODULE_DESCRIPTION("RC5T583 regulator driver"); +MODULE_ALIAS("platform:rc5t583-regulator"); +MODULE_LICENSE("GPL v2"); |