diff options
Diffstat (limited to 'drivers/regulator/tps80031-regulator.c')
| -rw-r--r-- | drivers/regulator/tps80031-regulator.c | 753 |
1 files changed, 753 insertions, 0 deletions
diff --git a/drivers/regulator/tps80031-regulator.c b/drivers/regulator/tps80031-regulator.c new file mode 100644 index 000000000..a29e65230 --- /dev/null +++ b/drivers/regulator/tps80031-regulator.c @@ -0,0 +1,753 @@ +// SPDX-License-Identifier: GPL-2.0 +// +// tps80031-regulator.c -- TI TPS80031 regulator driver. +// +// Regulator driver for TI TPS80031/TPS80032 Fully Integrated Power +// Management with Power Path and Battery Charger. +// +// Copyright (c) 2012, NVIDIA Corporation. +// +// Author: Laxman Dewangan <ldewangan@nvidia.com> + +#include <linux/delay.h> +#include <linux/err.h> +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/mfd/tps80031.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/regulator/driver.h> +#include <linux/regulator/machine.h> +#include <linux/slab.h> + +/* Flags for DCDC Voltage reading */ +#define DCDC_OFFSET_EN BIT(0) +#define DCDC_EXTENDED_EN BIT(1) +#define TRACK_MODE_ENABLE BIT(2) + +#define SMPS_MULTOFFSET_VIO BIT(1) +#define SMPS_MULTOFFSET_SMPS1 BIT(3) +#define SMPS_MULTOFFSET_SMPS2 BIT(4) +#define SMPS_MULTOFFSET_SMPS3 BIT(6) +#define SMPS_MULTOFFSET_SMPS4 BIT(0) + +#define SMPS_CMD_MASK 0xC0 +#define SMPS_VSEL_MASK 0x3F +#define LDO_VSEL_MASK 0x1F +#define LDO_TRACK_VSEL_MASK 0x3F + +#define MISC2_LDOUSB_IN_VSYS BIT(4) +#define MISC2_LDOUSB_IN_PMID BIT(3) +#define MISC2_LDOUSB_IN_MASK 0x18 + +#define MISC2_LDO3_SEL_VIB_VAL BIT(0) +#define MISC2_LDO3_SEL_VIB_MASK 0x1 + +#define BOOST_HW_PWR_EN BIT(5) +#define BOOST_HW_PWR_EN_MASK BIT(5) + +#define OPA_MODE_EN BIT(6) +#define OPA_MODE_EN_MASK BIT(6) + +#define USB_VBUS_CTRL_SET 0x04 +#define USB_VBUS_CTRL_CLR 0x05 +#define VBUS_DISCHRG 0x20 + +struct tps80031_regulator_info { + /* Regulator register address.*/ + u8 trans_reg; + u8 state_reg; + u8 force_reg; + u8 volt_reg; + u8 volt_id; + + /*Power request bits */ + int preq_bit; + + /* used by regulator core */ + struct regulator_desc desc; + +}; + +struct tps80031_regulator { + struct device *dev; + struct tps80031_regulator_info *rinfo; + + u8 device_flags; + unsigned int config_flags; + unsigned int ext_ctrl_flag; +}; + +static inline struct device *to_tps80031_dev(struct regulator_dev *rdev) +{ + return rdev_get_dev(rdev)->parent->parent; +} + +static int tps80031_reg_is_enabled(struct regulator_dev *rdev) +{ + struct tps80031_regulator *ri = rdev_get_drvdata(rdev); + struct device *parent = to_tps80031_dev(rdev); + u8 reg_val; + int ret; + + if (ri->ext_ctrl_flag & TPS80031_EXT_PWR_REQ) + return true; + + ret = tps80031_read(parent, TPS80031_SLAVE_ID1, ri->rinfo->state_reg, + ®_val); + if (ret < 0) { + dev_err(&rdev->dev, "Reg 0x%02x read failed, err = %d\n", + ri->rinfo->state_reg, ret); + return ret; + } + return (reg_val & TPS80031_STATE_MASK) == TPS80031_STATE_ON; +} + +static int tps80031_reg_enable(struct regulator_dev *rdev) +{ + struct tps80031_regulator *ri = rdev_get_drvdata(rdev); + struct device *parent = to_tps80031_dev(rdev); + int ret; + + if (ri->ext_ctrl_flag & TPS80031_EXT_PWR_REQ) + return 0; + + ret = tps80031_update(parent, TPS80031_SLAVE_ID1, ri->rinfo->state_reg, + TPS80031_STATE_ON, TPS80031_STATE_MASK); + if (ret < 0) { + dev_err(&rdev->dev, "Reg 0x%02x update failed, err = %d\n", + ri->rinfo->state_reg, ret); + return ret; + } + return ret; +} + +static int tps80031_reg_disable(struct regulator_dev *rdev) +{ + struct tps80031_regulator *ri = rdev_get_drvdata(rdev); + struct device *parent = to_tps80031_dev(rdev); + int ret; + + if (ri->ext_ctrl_flag & TPS80031_EXT_PWR_REQ) + return 0; + + ret = tps80031_update(parent, TPS80031_SLAVE_ID1, ri->rinfo->state_reg, + TPS80031_STATE_OFF, TPS80031_STATE_MASK); + if (ret < 0) + dev_err(&rdev->dev, "Reg 0x%02x update failed, err = %d\n", + ri->rinfo->state_reg, ret); + return ret; +} + +/* DCDC voltages for the selector of 58 to 63 */ +static const int tps80031_dcdc_voltages[4][5] = { + { 1350, 1500, 1800, 1900, 2100}, + { 1350, 1500, 1800, 1900, 2100}, + { 2084, 2315, 2778, 2932, 3241}, + { 4167, 2315, 2778, 2932, 3241}, +}; + +static int tps80031_dcdc_list_voltage(struct regulator_dev *rdev, unsigned sel) +{ + struct tps80031_regulator *ri = rdev_get_drvdata(rdev); + int volt_index = ri->device_flags & 0x3; + + if (sel == 0) + return 0; + else if (sel < 58) + return regulator_list_voltage_linear(rdev, sel - 1); + else + return tps80031_dcdc_voltages[volt_index][sel - 58] * 1000; +} + +static int tps80031_dcdc_set_voltage_sel(struct regulator_dev *rdev, + unsigned vsel) +{ + struct tps80031_regulator *ri = rdev_get_drvdata(rdev); + struct device *parent = to_tps80031_dev(rdev); + int ret; + u8 reg_val; + + if (ri->rinfo->force_reg) { + ret = tps80031_read(parent, ri->rinfo->volt_id, + ri->rinfo->force_reg, ®_val); + if (ret < 0) { + dev_err(ri->dev, "reg 0x%02x read failed, e = %d\n", + ri->rinfo->force_reg, ret); + return ret; + } + if (!(reg_val & SMPS_CMD_MASK)) { + ret = tps80031_update(parent, ri->rinfo->volt_id, + ri->rinfo->force_reg, vsel, SMPS_VSEL_MASK); + if (ret < 0) + dev_err(ri->dev, + "reg 0x%02x update failed, e = %d\n", + ri->rinfo->force_reg, ret); + return ret; + } + } + ret = tps80031_update(parent, ri->rinfo->volt_id, + ri->rinfo->volt_reg, vsel, SMPS_VSEL_MASK); + if (ret < 0) + dev_err(ri->dev, "reg 0x%02x update failed, e = %d\n", + ri->rinfo->volt_reg, ret); + return ret; +} + +static int tps80031_dcdc_get_voltage_sel(struct regulator_dev *rdev) +{ + struct tps80031_regulator *ri = rdev_get_drvdata(rdev); + struct device *parent = to_tps80031_dev(rdev); + uint8_t vsel = 0; + int ret; + + if (ri->rinfo->force_reg) { + ret = tps80031_read(parent, ri->rinfo->volt_id, + ri->rinfo->force_reg, &vsel); + if (ret < 0) { + dev_err(ri->dev, "reg 0x%02x read failed, e = %d\n", + ri->rinfo->force_reg, ret); + return ret; + } + + if (!(vsel & SMPS_CMD_MASK)) + return vsel & SMPS_VSEL_MASK; + } + ret = tps80031_read(parent, ri->rinfo->volt_id, + ri->rinfo->volt_reg, &vsel); + if (ret < 0) { + dev_err(ri->dev, "reg 0x%02x read failed, e = %d\n", + ri->rinfo->volt_reg, ret); + return ret; + } + return vsel & SMPS_VSEL_MASK; +} + +static int tps80031_ldo_list_voltage(struct regulator_dev *rdev, + unsigned int sel) +{ + struct tps80031_regulator *ri = rdev_get_drvdata(rdev); + struct device *parent = to_tps80031_dev(rdev); + + /* Check for valid setting for TPS80031 or TPS80032-ES1.0 */ + if ((ri->rinfo->desc.id == TPS80031_REGULATOR_LDO2) && + (ri->device_flags & TRACK_MODE_ENABLE)) { + unsigned nvsel = (sel) & 0x1F; + if (((tps80031_get_chip_info(parent) == TPS80031) || + ((tps80031_get_chip_info(parent) == TPS80032) && + (tps80031_get_pmu_version(parent) == 0x0))) && + ((nvsel == 0x0) || (nvsel >= 0x19 && nvsel <= 0x1F))) { + dev_err(ri->dev, + "Invalid sel %d in track mode LDO2\n", + nvsel); + return -EINVAL; + } + } + + return regulator_list_voltage_linear(rdev, sel); +} + +static int tps80031_ldo_map_voltage(struct regulator_dev *rdev, + int min_uV, int max_uV) +{ + struct tps80031_regulator *ri = rdev_get_drvdata(rdev); + struct device *parent = to_tps80031_dev(rdev); + + /* Check for valid setting for TPS80031 or TPS80032-ES1.0 */ + if ((ri->rinfo->desc.id == TPS80031_REGULATOR_LDO2) && + (ri->device_flags & TRACK_MODE_ENABLE)) { + if (((tps80031_get_chip_info(parent) == TPS80031) || + ((tps80031_get_chip_info(parent) == TPS80032) && + (tps80031_get_pmu_version(parent) == 0x0)))) { + return regulator_map_voltage_iterate(rdev, min_uV, + max_uV); + } + } + + return regulator_map_voltage_linear(rdev, min_uV, max_uV); +} + +static int tps80031_vbus_is_enabled(struct regulator_dev *rdev) +{ + struct tps80031_regulator *ri = rdev_get_drvdata(rdev); + struct device *parent = to_tps80031_dev(rdev); + int ret; + uint8_t ctrl1 = 0; + uint8_t ctrl3 = 0; + + ret = tps80031_read(parent, TPS80031_SLAVE_ID2, + TPS80031_CHARGERUSB_CTRL1, &ctrl1); + if (ret < 0) { + dev_err(ri->dev, "reg 0x%02x read failed, e = %d\n", + TPS80031_CHARGERUSB_CTRL1, ret); + return ret; + } + ret = tps80031_read(parent, TPS80031_SLAVE_ID2, + TPS80031_CHARGERUSB_CTRL3, &ctrl3); + if (ret < 0) { + dev_err(ri->dev, "reg 0x%02x read failed, e = %d\n", + TPS80031_CHARGERUSB_CTRL3, ret); + return ret; + } + if ((ctrl1 & OPA_MODE_EN) && (ctrl3 & BOOST_HW_PWR_EN)) + return 1; + return ret; +} + +static int tps80031_vbus_enable(struct regulator_dev *rdev) +{ + struct tps80031_regulator *ri = rdev_get_drvdata(rdev); + struct device *parent = to_tps80031_dev(rdev); + int ret; + + ret = tps80031_set_bits(parent, TPS80031_SLAVE_ID2, + TPS80031_CHARGERUSB_CTRL1, OPA_MODE_EN); + if (ret < 0) { + dev_err(ri->dev, "reg 0x%02x read failed, e = %d\n", + TPS80031_CHARGERUSB_CTRL1, ret); + return ret; + } + + ret = tps80031_set_bits(parent, TPS80031_SLAVE_ID2, + TPS80031_CHARGERUSB_CTRL3, BOOST_HW_PWR_EN); + if (ret < 0) { + dev_err(ri->dev, "reg 0x%02x read failed, e = %d\n", + TPS80031_CHARGERUSB_CTRL3, ret); + return ret; + } + return ret; +} + +static int tps80031_vbus_disable(struct regulator_dev *rdev) +{ + struct tps80031_regulator *ri = rdev_get_drvdata(rdev); + struct device *parent = to_tps80031_dev(rdev); + int ret; + + if (ri->config_flags & TPS80031_VBUS_DISCHRG_EN_PDN) { + ret = tps80031_write(parent, TPS80031_SLAVE_ID2, + USB_VBUS_CTRL_SET, VBUS_DISCHRG); + if (ret < 0) { + dev_err(ri->dev, "reg 0x%02x write failed, e = %d\n", + USB_VBUS_CTRL_SET, ret); + return ret; + } + } + + ret = tps80031_clr_bits(parent, TPS80031_SLAVE_ID2, + TPS80031_CHARGERUSB_CTRL1, OPA_MODE_EN); + if (ret < 0) { + dev_err(ri->dev, "reg 0x%02x clearbit failed, e = %d\n", + TPS80031_CHARGERUSB_CTRL1, ret); + return ret; + } + + ret = tps80031_clr_bits(parent, TPS80031_SLAVE_ID2, + TPS80031_CHARGERUSB_CTRL3, BOOST_HW_PWR_EN); + if (ret < 0) { + dev_err(ri->dev, "reg 0x%02x clearbit failed, e = %d\n", + TPS80031_CHARGERUSB_CTRL3, ret); + return ret; + } + + mdelay(DIV_ROUND_UP(ri->rinfo->desc.enable_time, 1000)); + if (ri->config_flags & TPS80031_VBUS_DISCHRG_EN_PDN) { + ret = tps80031_write(parent, TPS80031_SLAVE_ID2, + USB_VBUS_CTRL_CLR, VBUS_DISCHRG); + if (ret < 0) { + dev_err(ri->dev, "reg 0x%02x write failed, e = %d\n", + USB_VBUS_CTRL_CLR, ret); + return ret; + } + } + return ret; +} + +static const struct regulator_ops tps80031_dcdc_ops = { + .list_voltage = tps80031_dcdc_list_voltage, + .set_voltage_sel = tps80031_dcdc_set_voltage_sel, + .get_voltage_sel = tps80031_dcdc_get_voltage_sel, + .enable = tps80031_reg_enable, + .disable = tps80031_reg_disable, + .is_enabled = tps80031_reg_is_enabled, +}; + +static const struct regulator_ops tps80031_ldo_ops = { + .list_voltage = tps80031_ldo_list_voltage, + .map_voltage = tps80031_ldo_map_voltage, + .set_voltage_sel = regulator_set_voltage_sel_regmap, + .get_voltage_sel = regulator_get_voltage_sel_regmap, + .enable = tps80031_reg_enable, + .disable = tps80031_reg_disable, + .is_enabled = tps80031_reg_is_enabled, +}; + +static const struct regulator_ops tps80031_vbus_sw_ops = { + .list_voltage = regulator_list_voltage_linear, + .enable = tps80031_vbus_enable, + .disable = tps80031_vbus_disable, + .is_enabled = tps80031_vbus_is_enabled, +}; + +static const struct regulator_ops tps80031_vbus_hw_ops = { + .list_voltage = regulator_list_voltage_linear, +}; + +static const struct regulator_ops tps80031_ext_reg_ops = { + .list_voltage = regulator_list_voltage_linear, + .enable = tps80031_reg_enable, + .disable = tps80031_reg_disable, + .is_enabled = tps80031_reg_is_enabled, +}; + +/* Non-exiting default definition for some register */ +#define TPS80031_SMPS3_CFG_FORCE 0 +#define TPS80031_SMPS4_CFG_FORCE 0 + +#define TPS80031_VBUS_CFG_TRANS 0 +#define TPS80031_VBUS_CFG_STATE 0 + +#define TPS80031_REG_SMPS(_id, _volt_id, _pbit) \ +{ \ + .trans_reg = TPS80031_##_id##_CFG_TRANS, \ + .state_reg = TPS80031_##_id##_CFG_STATE, \ + .force_reg = TPS80031_##_id##_CFG_FORCE, \ + .volt_reg = TPS80031_##_id##_CFG_VOLTAGE, \ + .volt_id = TPS80031_SLAVE_##_volt_id, \ + .preq_bit = _pbit, \ + .desc = { \ + .name = "tps80031_"#_id, \ + .id = TPS80031_REGULATOR_##_id, \ + .n_voltages = 63, \ + .ops = &tps80031_dcdc_ops, \ + .type = REGULATOR_VOLTAGE, \ + .owner = THIS_MODULE, \ + .enable_time = 500, \ + }, \ +} + +#define TPS80031_REG_LDO(_id, _preq_bit) \ +{ \ + .trans_reg = TPS80031_##_id##_CFG_TRANS, \ + .state_reg = TPS80031_##_id##_CFG_STATE, \ + .volt_reg = TPS80031_##_id##_CFG_VOLTAGE, \ + .volt_id = TPS80031_SLAVE_ID1, \ + .preq_bit = _preq_bit, \ + .desc = { \ + .owner = THIS_MODULE, \ + .name = "tps80031_"#_id, \ + .id = TPS80031_REGULATOR_##_id, \ + .ops = &tps80031_ldo_ops, \ + .type = REGULATOR_VOLTAGE, \ + .min_uV = 1000000, \ + .uV_step = 100000, \ + .linear_min_sel = 1, \ + .n_voltages = 25, \ + .vsel_reg = TPS80031_##_id##_CFG_VOLTAGE, \ + .vsel_mask = LDO_VSEL_MASK, \ + .enable_time = 500, \ + }, \ +} + +#define TPS80031_REG_FIXED(_id, max_mV, _ops, _delay, _pbit) \ +{ \ + .trans_reg = TPS80031_##_id##_CFG_TRANS, \ + .state_reg = TPS80031_##_id##_CFG_STATE, \ + .volt_id = TPS80031_SLAVE_ID1, \ + .preq_bit = _pbit, \ + .desc = { \ + .name = "tps80031_"#_id, \ + .id = TPS80031_REGULATOR_##_id, \ + .min_uV = max_mV * 1000, \ + .n_voltages = 1, \ + .ops = &_ops, \ + .type = REGULATOR_VOLTAGE, \ + .owner = THIS_MODULE, \ + .enable_time = _delay, \ + }, \ +} + +static struct tps80031_regulator_info tps80031_rinfo[TPS80031_REGULATOR_MAX] = { + TPS80031_REG_SMPS(VIO, ID0, 4), + TPS80031_REG_SMPS(SMPS1, ID0, 0), + TPS80031_REG_SMPS(SMPS2, ID0, 1), + TPS80031_REG_SMPS(SMPS3, ID1, 2), + TPS80031_REG_SMPS(SMPS4, ID1, 3), + TPS80031_REG_LDO(VANA, -1), + TPS80031_REG_LDO(LDO1, 8), + TPS80031_REG_LDO(LDO2, 9), + TPS80031_REG_LDO(LDO3, 10), + TPS80031_REG_LDO(LDO4, 11), + TPS80031_REG_LDO(LDO5, 12), + TPS80031_REG_LDO(LDO6, 13), + TPS80031_REG_LDO(LDO7, 14), + TPS80031_REG_LDO(LDOLN, 15), + TPS80031_REG_LDO(LDOUSB, 5), + TPS80031_REG_FIXED(VBUS, 5000, tps80031_vbus_hw_ops, 100000, -1), + TPS80031_REG_FIXED(REGEN1, 3300, tps80031_ext_reg_ops, 0, 16), + TPS80031_REG_FIXED(REGEN2, 3300, tps80031_ext_reg_ops, 0, 17), + TPS80031_REG_FIXED(SYSEN, 3300, tps80031_ext_reg_ops, 0, 18), +}; + +static int tps80031_power_req_config(struct device *parent, + struct tps80031_regulator *ri, + struct tps80031_regulator_platform_data *tps80031_pdata) +{ + int ret = 0; + + if (ri->rinfo->preq_bit < 0) + goto skip_pwr_req_config; + + ret = tps80031_ext_power_req_config(parent, ri->ext_ctrl_flag, + ri->rinfo->preq_bit, ri->rinfo->state_reg, + ri->rinfo->trans_reg); + if (ret < 0) { + dev_err(ri->dev, "ext powerreq config failed, err = %d\n", ret); + return ret; + } + +skip_pwr_req_config: + if (tps80031_pdata->ext_ctrl_flag & TPS80031_PWR_ON_ON_SLEEP) { + ret = tps80031_update(parent, TPS80031_SLAVE_ID1, + ri->rinfo->trans_reg, TPS80031_TRANS_SLEEP_ON, + TPS80031_TRANS_SLEEP_MASK); + if (ret < 0) { + dev_err(ri->dev, "Reg 0x%02x update failed, e %d\n", + ri->rinfo->trans_reg, ret); + return ret; + } + } + return ret; +} + +static int tps80031_regulator_config(struct device *parent, + struct tps80031_regulator *ri, + struct tps80031_regulator_platform_data *tps80031_pdata) +{ + int ret = 0; + + switch (ri->rinfo->desc.id) { + case TPS80031_REGULATOR_LDOUSB: + if (ri->config_flags & (TPS80031_USBLDO_INPUT_VSYS | + TPS80031_USBLDO_INPUT_PMID)) { + unsigned val; + + if (ri->config_flags & TPS80031_USBLDO_INPUT_VSYS) + val = MISC2_LDOUSB_IN_VSYS; + else + val = MISC2_LDOUSB_IN_PMID; + + ret = tps80031_update(parent, TPS80031_SLAVE_ID1, + TPS80031_MISC2, val, + MISC2_LDOUSB_IN_MASK); + if (ret < 0) { + dev_err(ri->dev, + "LDOUSB config failed, e= %d\n", ret); + return ret; + } + } + break; + + case TPS80031_REGULATOR_LDO3: + if (ri->config_flags & TPS80031_LDO3_OUTPUT_VIB) { + ret = tps80031_update(parent, TPS80031_SLAVE_ID1, + TPS80031_MISC2, MISC2_LDO3_SEL_VIB_VAL, + MISC2_LDO3_SEL_VIB_MASK); + if (ret < 0) { + dev_err(ri->dev, + "LDO3 config failed, e = %d\n", ret); + return ret; + } + } + break; + + case TPS80031_REGULATOR_VBUS: + /* Provide SW control Ops if VBUS is SW control */ + if (!(ri->config_flags & TPS80031_VBUS_SW_ONLY)) + ri->rinfo->desc.ops = &tps80031_vbus_sw_ops; + break; + default: + break; + } + + /* Configure Active state to ON, SLEEP to OFF and OFF_state to OFF */ + ret = tps80031_update(parent, TPS80031_SLAVE_ID1, ri->rinfo->trans_reg, + TPS80031_TRANS_ACTIVE_ON | TPS80031_TRANS_SLEEP_OFF | + TPS80031_TRANS_OFF_OFF, TPS80031_TRANS_ACTIVE_MASK | + TPS80031_TRANS_SLEEP_MASK | TPS80031_TRANS_OFF_MASK); + if (ret < 0) { + dev_err(ri->dev, "trans reg update failed, e %d\n", ret); + return ret; + } + + return ret; +} + +static int check_smps_mode_mult(struct device *parent, + struct tps80031_regulator *ri) +{ + int mult_offset; + int ret; + u8 smps_offset; + u8 smps_mult; + + ret = tps80031_read(parent, TPS80031_SLAVE_ID1, + TPS80031_SMPS_OFFSET, &smps_offset); + if (ret < 0) { + dev_err(parent, "Error in reading smps offset register\n"); + return ret; + } + + ret = tps80031_read(parent, TPS80031_SLAVE_ID1, + TPS80031_SMPS_MULT, &smps_mult); + if (ret < 0) { + dev_err(parent, "Error in reading smps mult register\n"); + return ret; + } + + switch (ri->rinfo->desc.id) { + case TPS80031_REGULATOR_VIO: + mult_offset = SMPS_MULTOFFSET_VIO; + break; + case TPS80031_REGULATOR_SMPS1: + mult_offset = SMPS_MULTOFFSET_SMPS1; + break; + case TPS80031_REGULATOR_SMPS2: + mult_offset = SMPS_MULTOFFSET_SMPS2; + break; + case TPS80031_REGULATOR_SMPS3: + mult_offset = SMPS_MULTOFFSET_SMPS3; + break; + case TPS80031_REGULATOR_SMPS4: + mult_offset = SMPS_MULTOFFSET_SMPS4; + break; + case TPS80031_REGULATOR_LDO2: + ri->device_flags = smps_mult & BIT(5) ? TRACK_MODE_ENABLE : 0; + /* TRACK mode the ldo2 varies from 600mV to 1300mV */ + if (ri->device_flags & TRACK_MODE_ENABLE) { + ri->rinfo->desc.min_uV = 600000; + ri->rinfo->desc.uV_step = 12500; + ri->rinfo->desc.n_voltages = 57; + ri->rinfo->desc.vsel_mask = LDO_TRACK_VSEL_MASK; + } + return 0; + default: + return 0; + } + + ri->device_flags = (smps_offset & mult_offset) ? DCDC_OFFSET_EN : 0; + ri->device_flags |= (smps_mult & mult_offset) ? DCDC_EXTENDED_EN : 0; + switch (ri->device_flags) { + case 0: + ri->rinfo->desc.min_uV = 607700; + ri->rinfo->desc.uV_step = 12660; + break; + case DCDC_OFFSET_EN: + ri->rinfo->desc.min_uV = 700000; + ri->rinfo->desc.uV_step = 12500; + break; + case DCDC_EXTENDED_EN: + ri->rinfo->desc.min_uV = 1852000; + ri->rinfo->desc.uV_step = 38600; + break; + case DCDC_OFFSET_EN | DCDC_EXTENDED_EN: + ri->rinfo->desc.min_uV = 2161000; + ri->rinfo->desc.uV_step = 38600; + break; + } + return 0; +} + +static int tps80031_regulator_probe(struct platform_device *pdev) +{ + struct tps80031_platform_data *pdata; + struct tps80031_regulator_platform_data *tps_pdata; + struct tps80031_regulator *ri; + struct tps80031_regulator *pmic; + struct regulator_dev *rdev; + struct regulator_config config = { }; + struct tps80031 *tps80031_mfd = dev_get_drvdata(pdev->dev.parent); + int ret; + int num; + + pdata = dev_get_platdata(pdev->dev.parent); + + if (!pdata) { + dev_err(&pdev->dev, "No platform data\n"); + return -EINVAL; + } + + pmic = devm_kcalloc(&pdev->dev, + TPS80031_REGULATOR_MAX, sizeof(*pmic), GFP_KERNEL); + if (!pmic) + return -ENOMEM; + + for (num = 0; num < TPS80031_REGULATOR_MAX; ++num) { + tps_pdata = pdata->regulator_pdata[num]; + ri = &pmic[num]; + ri->rinfo = &tps80031_rinfo[num]; + ri->dev = &pdev->dev; + + check_smps_mode_mult(pdev->dev.parent, ri); + config.dev = &pdev->dev; + config.init_data = NULL; + config.driver_data = ri; + config.regmap = tps80031_mfd->regmap[ri->rinfo->volt_id]; + + if (tps_pdata) { + config.init_data = tps_pdata->reg_init_data; + ri->config_flags = tps_pdata->config_flags; + ri->ext_ctrl_flag = tps_pdata->ext_ctrl_flag; + ret = tps80031_regulator_config(pdev->dev.parent, + ri, tps_pdata); + if (ret < 0) { + dev_err(&pdev->dev, + "regulator config failed, e %d\n", ret); + return ret; + } + + ret = tps80031_power_req_config(pdev->dev.parent, + ri, tps_pdata); + if (ret < 0) { + dev_err(&pdev->dev, + "pwr_req config failed, err %d\n", ret); + return ret; + } + } + rdev = devm_regulator_register(&pdev->dev, &ri->rinfo->desc, + &config); + if (IS_ERR(rdev)) { + dev_err(&pdev->dev, + "register regulator failed %s\n", + ri->rinfo->desc.name); + return PTR_ERR(rdev); + } + } + + platform_set_drvdata(pdev, pmic); + return 0; +} + +static struct platform_driver tps80031_regulator_driver = { + .driver = { + .name = "tps80031-pmic", + }, + .probe = tps80031_regulator_probe, +}; + +static int __init tps80031_regulator_init(void) +{ + return platform_driver_register(&tps80031_regulator_driver); +} +subsys_initcall(tps80031_regulator_init); + +static void __exit tps80031_regulator_exit(void) +{ + platform_driver_unregister(&tps80031_regulator_driver); +} +module_exit(tps80031_regulator_exit); + +MODULE_ALIAS("platform:tps80031-regulator"); +MODULE_DESCRIPTION("Regulator Driver for TI TPS80031/TPS80032 PMIC"); +MODULE_AUTHOR("Laxman Dewangan <ldewangan@nvidia.com>"); +MODULE_LICENSE("GPL v2"); |