diff options
Diffstat (limited to '')
| -rw-r--r-- | drivers/remoteproc/keystone_remoteproc.c | 514 |
1 files changed, 514 insertions, 0 deletions
diff --git a/drivers/remoteproc/keystone_remoteproc.c b/drivers/remoteproc/keystone_remoteproc.c new file mode 100644 index 000000000..cd266163a --- /dev/null +++ b/drivers/remoteproc/keystone_remoteproc.c @@ -0,0 +1,514 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * TI Keystone DSP remoteproc driver + * + * Copyright (C) 2015-2017 Texas Instruments Incorporated - http://www.ti.com/ + */ + +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/io.h> +#include <linux/interrupt.h> +#include <linux/platform_device.h> +#include <linux/pm_runtime.h> +#include <linux/workqueue.h> +#include <linux/of_address.h> +#include <linux/of_reserved_mem.h> +#include <linux/of_gpio.h> +#include <linux/regmap.h> +#include <linux/mfd/syscon.h> +#include <linux/remoteproc.h> +#include <linux/reset.h> + +#include "remoteproc_internal.h" + +#define KEYSTONE_RPROC_LOCAL_ADDRESS_MASK (SZ_16M - 1) + +/** + * struct keystone_rproc_mem - internal memory structure + * @cpu_addr: MPU virtual address of the memory region + * @bus_addr: Bus address used to access the memory region + * @dev_addr: Device address of the memory region from DSP view + * @size: Size of the memory region + */ +struct keystone_rproc_mem { + void __iomem *cpu_addr; + phys_addr_t bus_addr; + u32 dev_addr; + size_t size; +}; + +/** + * struct keystone_rproc - keystone remote processor driver structure + * @dev: cached device pointer + * @rproc: remoteproc device handle + * @mem: internal memory regions data + * @num_mems: number of internal memory regions + * @dev_ctrl: device control regmap handle + * @reset: reset control handle + * @boot_offset: boot register offset in @dev_ctrl regmap + * @irq_ring: irq entry for vring + * @irq_fault: irq entry for exception + * @kick_gpio: gpio used for virtio kicks + * @workqueue: workqueue for processing virtio interrupts + */ +struct keystone_rproc { + struct device *dev; + struct rproc *rproc; + struct keystone_rproc_mem *mem; + int num_mems; + struct regmap *dev_ctrl; + struct reset_control *reset; + u32 boot_offset; + int irq_ring; + int irq_fault; + int kick_gpio; + struct work_struct workqueue; +}; + +/* Put the DSP processor into reset */ +static void keystone_rproc_dsp_reset(struct keystone_rproc *ksproc) +{ + reset_control_assert(ksproc->reset); +} + +/* Configure the boot address and boot the DSP processor */ +static int keystone_rproc_dsp_boot(struct keystone_rproc *ksproc, u32 boot_addr) +{ + int ret; + + if (boot_addr & (SZ_1K - 1)) { + dev_err(ksproc->dev, "invalid boot address 0x%x, must be aligned on a 1KB boundary\n", + boot_addr); + return -EINVAL; + } + + ret = regmap_write(ksproc->dev_ctrl, ksproc->boot_offset, boot_addr); + if (ret) { + dev_err(ksproc->dev, "regmap_write of boot address failed, status = %d\n", + ret); + return ret; + } + + reset_control_deassert(ksproc->reset); + + return 0; +} + +/* + * Process the remoteproc exceptions + * + * The exception reporting on Keystone DSP remote processors is very simple + * compared to the equivalent processors on the OMAP family, it is notified + * through a software-designed specific interrupt source in the IPC interrupt + * generation register. + * + * This function just invokes the rproc_report_crash to report the exception + * to the remoteproc driver core, to trigger a recovery. + */ +static irqreturn_t keystone_rproc_exception_interrupt(int irq, void *dev_id) +{ + struct keystone_rproc *ksproc = dev_id; + + rproc_report_crash(ksproc->rproc, RPROC_FATAL_ERROR); + + return IRQ_HANDLED; +} + +/* + * Main virtqueue message workqueue function + * + * This function is executed upon scheduling of the keystone remoteproc + * driver's workqueue. The workqueue is scheduled by the vring ISR handler. + * + * There is no payload message indicating the virtqueue index as is the + * case with mailbox-based implementations on OMAP family. As such, this + * handler processes both the Tx and Rx virtqueue indices on every invocation. + * The rproc_vq_interrupt function can detect if there are new unprocessed + * messages or not (returns IRQ_NONE vs IRQ_HANDLED), but there is no need + * to check for these return values. The index 0 triggering will process all + * pending Rx buffers, and the index 1 triggering will process all newly + * available Tx buffers and will wakeup any potentially blocked senders. + * + * NOTE: + * 1. A payload could be added by using some of the source bits in the + * IPC interrupt generation registers, but this would need additional + * changes to the overall IPC stack, and currently there are no benefits + * of adapting that approach. + * 2. The current logic is based on an inherent design assumption of supporting + * only 2 vrings, but this can be changed if needed. + */ +static void handle_event(struct work_struct *work) +{ + struct keystone_rproc *ksproc = + container_of(work, struct keystone_rproc, workqueue); + + rproc_vq_interrupt(ksproc->rproc, 0); + rproc_vq_interrupt(ksproc->rproc, 1); +} + +/* + * Interrupt handler for processing vring kicks from remote processor + */ +static irqreturn_t keystone_rproc_vring_interrupt(int irq, void *dev_id) +{ + struct keystone_rproc *ksproc = dev_id; + + schedule_work(&ksproc->workqueue); + + return IRQ_HANDLED; +} + +/* + * Power up the DSP remote processor. + * + * This function will be invoked only after the firmware for this rproc + * was loaded, parsed successfully, and all of its resource requirements + * were met. + */ +static int keystone_rproc_start(struct rproc *rproc) +{ + struct keystone_rproc *ksproc = rproc->priv; + int ret; + + INIT_WORK(&ksproc->workqueue, handle_event); + + ret = request_irq(ksproc->irq_ring, keystone_rproc_vring_interrupt, 0, + dev_name(ksproc->dev), ksproc); + if (ret) { + dev_err(ksproc->dev, "failed to enable vring interrupt, ret = %d\n", + ret); + goto out; + } + + ret = request_irq(ksproc->irq_fault, keystone_rproc_exception_interrupt, + 0, dev_name(ksproc->dev), ksproc); + if (ret) { + dev_err(ksproc->dev, "failed to enable exception interrupt, ret = %d\n", + ret); + goto free_vring_irq; + } + + ret = keystone_rproc_dsp_boot(ksproc, rproc->bootaddr); + if (ret) + goto free_exc_irq; + + return 0; + +free_exc_irq: + free_irq(ksproc->irq_fault, ksproc); +free_vring_irq: + free_irq(ksproc->irq_ring, ksproc); + flush_work(&ksproc->workqueue); +out: + return ret; +} + +/* + * Stop the DSP remote processor. + * + * This function puts the DSP processor into reset, and finishes processing + * of any pending messages. + */ +static int keystone_rproc_stop(struct rproc *rproc) +{ + struct keystone_rproc *ksproc = rproc->priv; + + keystone_rproc_dsp_reset(ksproc); + free_irq(ksproc->irq_fault, ksproc); + free_irq(ksproc->irq_ring, ksproc); + flush_work(&ksproc->workqueue); + + return 0; +} + +/* + * Kick the remote processor to notify about pending unprocessed messages. + * The vqid usage is not used and is inconsequential, as the kick is performed + * through a simulated GPIO (a bit in an IPC interrupt-triggering register), + * the remote processor is expected to process both its Tx and Rx virtqueues. + */ +static void keystone_rproc_kick(struct rproc *rproc, int vqid) +{ + struct keystone_rproc *ksproc = rproc->priv; + + if (WARN_ON(ksproc->kick_gpio < 0)) + return; + + gpio_set_value(ksproc->kick_gpio, 1); +} + +/* + * Custom function to translate a DSP device address (internal RAMs only) to a + * kernel virtual address. The DSPs can access their RAMs at either an internal + * address visible only from a DSP, or at the SoC-level bus address. Both these + * addresses need to be looked through for translation. The translated addresses + * can be used either by the remoteproc core for loading (when using kernel + * remoteproc loader), or by any rpmsg bus drivers. + */ +static void *keystone_rproc_da_to_va(struct rproc *rproc, u64 da, size_t len) +{ + struct keystone_rproc *ksproc = rproc->priv; + void __iomem *va = NULL; + phys_addr_t bus_addr; + u32 dev_addr, offset; + size_t size; + int i; + + if (len == 0) + return NULL; + + for (i = 0; i < ksproc->num_mems; i++) { + bus_addr = ksproc->mem[i].bus_addr; + dev_addr = ksproc->mem[i].dev_addr; + size = ksproc->mem[i].size; + + if (da < KEYSTONE_RPROC_LOCAL_ADDRESS_MASK) { + /* handle DSP-view addresses */ + if ((da >= dev_addr) && + ((da + len) <= (dev_addr + size))) { + offset = da - dev_addr; + va = ksproc->mem[i].cpu_addr + offset; + break; + } + } else { + /* handle SoC-view addresses */ + if ((da >= bus_addr) && + (da + len) <= (bus_addr + size)) { + offset = da - bus_addr; + va = ksproc->mem[i].cpu_addr + offset; + break; + } + } + } + + return (__force void *)va; +} + +static const struct rproc_ops keystone_rproc_ops = { + .start = keystone_rproc_start, + .stop = keystone_rproc_stop, + .kick = keystone_rproc_kick, + .da_to_va = keystone_rproc_da_to_va, +}; + +static int keystone_rproc_of_get_memories(struct platform_device *pdev, + struct keystone_rproc *ksproc) +{ + static const char * const mem_names[] = {"l2sram", "l1pram", "l1dram"}; + struct device *dev = &pdev->dev; + struct resource *res; + int num_mems = 0; + int i; + + num_mems = ARRAY_SIZE(mem_names); + ksproc->mem = devm_kcalloc(ksproc->dev, num_mems, + sizeof(*ksproc->mem), GFP_KERNEL); + if (!ksproc->mem) + return -ENOMEM; + + for (i = 0; i < num_mems; i++) { + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, + mem_names[i]); + ksproc->mem[i].cpu_addr = devm_ioremap_resource(dev, res); + if (IS_ERR(ksproc->mem[i].cpu_addr)) { + dev_err(dev, "failed to parse and map %s memory\n", + mem_names[i]); + return PTR_ERR(ksproc->mem[i].cpu_addr); + } + ksproc->mem[i].bus_addr = res->start; + ksproc->mem[i].dev_addr = + res->start & KEYSTONE_RPROC_LOCAL_ADDRESS_MASK; + ksproc->mem[i].size = resource_size(res); + + /* zero out memories to start in a pristine state */ + memset((__force void *)ksproc->mem[i].cpu_addr, 0, + ksproc->mem[i].size); + } + ksproc->num_mems = num_mems; + + return 0; +} + +static int keystone_rproc_of_get_dev_syscon(struct platform_device *pdev, + struct keystone_rproc *ksproc) +{ + struct device_node *np = pdev->dev.of_node; + struct device *dev = &pdev->dev; + int ret; + + if (!of_property_read_bool(np, "ti,syscon-dev")) { + dev_err(dev, "ti,syscon-dev property is absent\n"); + return -EINVAL; + } + + ksproc->dev_ctrl = + syscon_regmap_lookup_by_phandle(np, "ti,syscon-dev"); + if (IS_ERR(ksproc->dev_ctrl)) { + ret = PTR_ERR(ksproc->dev_ctrl); + return ret; + } + + if (of_property_read_u32_index(np, "ti,syscon-dev", 1, + &ksproc->boot_offset)) { + dev_err(dev, "couldn't read the boot register offset\n"); + return -EINVAL; + } + + return 0; +} + +static int keystone_rproc_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct device_node *np = dev->of_node; + struct keystone_rproc *ksproc; + struct rproc *rproc; + int dsp_id; + char *fw_name = NULL; + char *template = "keystone-dsp%d-fw"; + int name_len = 0; + int ret = 0; + + if (!np) { + dev_err(dev, "only DT-based devices are supported\n"); + return -ENODEV; + } + + dsp_id = of_alias_get_id(np, "rproc"); + if (dsp_id < 0) { + dev_warn(dev, "device does not have an alias id\n"); + return dsp_id; + } + + /* construct a custom default fw name - subject to change in future */ + name_len = strlen(template); /* assuming a single digit alias */ + fw_name = devm_kzalloc(dev, name_len, GFP_KERNEL); + if (!fw_name) + return -ENOMEM; + snprintf(fw_name, name_len, template, dsp_id); + + rproc = rproc_alloc(dev, dev_name(dev), &keystone_rproc_ops, fw_name, + sizeof(*ksproc)); + if (!rproc) + return -ENOMEM; + + rproc->has_iommu = false; + ksproc = rproc->priv; + ksproc->rproc = rproc; + ksproc->dev = dev; + + ret = keystone_rproc_of_get_dev_syscon(pdev, ksproc); + if (ret) + goto free_rproc; + + ksproc->reset = devm_reset_control_get_exclusive(dev, NULL); + if (IS_ERR(ksproc->reset)) { + ret = PTR_ERR(ksproc->reset); + goto free_rproc; + } + + /* enable clock for accessing DSP internal memories */ + pm_runtime_enable(dev); + ret = pm_runtime_get_sync(dev); + if (ret < 0) { + dev_err(dev, "failed to enable clock, status = %d\n", ret); + pm_runtime_put_noidle(dev); + goto disable_rpm; + } + + ret = keystone_rproc_of_get_memories(pdev, ksproc); + if (ret) + goto disable_clk; + + ksproc->irq_ring = platform_get_irq_byname(pdev, "vring"); + if (ksproc->irq_ring < 0) { + ret = ksproc->irq_ring; + goto disable_clk; + } + + ksproc->irq_fault = platform_get_irq_byname(pdev, "exception"); + if (ksproc->irq_fault < 0) { + ret = ksproc->irq_fault; + goto disable_clk; + } + + ksproc->kick_gpio = of_get_named_gpio_flags(np, "kick-gpios", 0, NULL); + if (ksproc->kick_gpio < 0) { + ret = ksproc->kick_gpio; + dev_err(dev, "failed to get gpio for virtio kicks, status = %d\n", + ret); + goto disable_clk; + } + + if (of_reserved_mem_device_init(dev)) + dev_warn(dev, "device does not have specific CMA pool\n"); + + /* ensure the DSP is in reset before loading firmware */ + ret = reset_control_status(ksproc->reset); + if (ret < 0) { + dev_err(dev, "failed to get reset status, status = %d\n", ret); + goto release_mem; + } else if (ret == 0) { + WARN(1, "device is not in reset\n"); + keystone_rproc_dsp_reset(ksproc); + } + + ret = rproc_add(rproc); + if (ret) { + dev_err(dev, "failed to add register device with remoteproc core, status = %d\n", + ret); + goto release_mem; + } + + platform_set_drvdata(pdev, ksproc); + + return 0; + +release_mem: + of_reserved_mem_device_release(dev); +disable_clk: + pm_runtime_put_sync(dev); +disable_rpm: + pm_runtime_disable(dev); +free_rproc: + rproc_free(rproc); + return ret; +} + +static int keystone_rproc_remove(struct platform_device *pdev) +{ + struct keystone_rproc *ksproc = platform_get_drvdata(pdev); + + rproc_del(ksproc->rproc); + pm_runtime_put_sync(&pdev->dev); + pm_runtime_disable(&pdev->dev); + rproc_free(ksproc->rproc); + of_reserved_mem_device_release(&pdev->dev); + + return 0; +} + +static const struct of_device_id keystone_rproc_of_match[] = { + { .compatible = "ti,k2hk-dsp", }, + { .compatible = "ti,k2l-dsp", }, + { .compatible = "ti,k2e-dsp", }, + { .compatible = "ti,k2g-dsp", }, + { /* sentinel */ }, +}; +MODULE_DEVICE_TABLE(of, keystone_rproc_of_match); + +static struct platform_driver keystone_rproc_driver = { + .probe = keystone_rproc_probe, + .remove = keystone_rproc_remove, + .driver = { + .name = "keystone-rproc", + .of_match_table = keystone_rproc_of_match, + }, +}; + +module_platform_driver(keystone_rproc_driver); + +MODULE_AUTHOR("Suman Anna <s-anna@ti.com>"); +MODULE_LICENSE("GPL v2"); +MODULE_DESCRIPTION("TI Keystone DSP Remoteproc driver"); |