diff options
Diffstat (limited to 'drivers/scsi/aacraid/linit.c')
| -rw-r--r-- | drivers/scsi/aacraid/linit.c | 2092 |
1 files changed, 2092 insertions, 0 deletions
diff --git a/drivers/scsi/aacraid/linit.c b/drivers/scsi/aacraid/linit.c new file mode 100644 index 000000000..0a82afaf4 --- /dev/null +++ b/drivers/scsi/aacraid/linit.c @@ -0,0 +1,2092 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Adaptec AAC series RAID controller driver + * (c) Copyright 2001 Red Hat Inc. + * + * based on the old aacraid driver that is.. + * Adaptec aacraid device driver for Linux. + * + * Copyright (c) 2000-2010 Adaptec, Inc. + * 2010-2015 PMC-Sierra, Inc. (aacraid@pmc-sierra.com) + * 2016-2017 Microsemi Corp. (aacraid@microsemi.com) + * + * Module Name: + * linit.c + * + * Abstract: Linux Driver entry module for Adaptec RAID Array Controller + */ + + +#include <linux/compat.h> +#include <linux/blkdev.h> +#include <linux/completion.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/pci.h> +#include <linux/aer.h> +#include <linux/slab.h> +#include <linux/mutex.h> +#include <linux/spinlock.h> +#include <linux/syscalls.h> +#include <linux/delay.h> +#include <linux/kthread.h> +#include <linux/msdos_partition.h> + +#include <scsi/scsi.h> +#include <scsi/scsi_cmnd.h> +#include <scsi/scsi_device.h> +#include <scsi/scsi_host.h> +#include <scsi/scsi_tcq.h> +#include <scsi/scsicam.h> +#include <scsi/scsi_eh.h> + +#include "aacraid.h" + +#define AAC_DRIVER_VERSION "1.2.1" +#ifndef AAC_DRIVER_BRANCH +#define AAC_DRIVER_BRANCH "" +#endif +#define AAC_DRIVERNAME "aacraid" + +#ifdef AAC_DRIVER_BUILD +#define _str(x) #x +#define str(x) _str(x) +#define AAC_DRIVER_FULL_VERSION AAC_DRIVER_VERSION "[" str(AAC_DRIVER_BUILD) "]" AAC_DRIVER_BRANCH +#else +#define AAC_DRIVER_FULL_VERSION AAC_DRIVER_VERSION AAC_DRIVER_BRANCH +#endif + +MODULE_AUTHOR("Red Hat Inc and Adaptec"); +MODULE_DESCRIPTION("Dell PERC2, 2/Si, 3/Si, 3/Di, " + "Adaptec Advanced Raid Products, " + "HP NetRAID-4M, IBM ServeRAID & ICP SCSI driver"); +MODULE_LICENSE("GPL"); +MODULE_VERSION(AAC_DRIVER_FULL_VERSION); + +static DEFINE_MUTEX(aac_mutex); +static LIST_HEAD(aac_devices); +static int aac_cfg_major = AAC_CHARDEV_UNREGISTERED; +char aac_driver_version[] = AAC_DRIVER_FULL_VERSION; + +/* + * Because of the way Linux names scsi devices, the order in this table has + * become important. Check for on-board Raid first, add-in cards second. + * + * Note: The last field is used to index into aac_drivers below. + */ +static const struct pci_device_id aac_pci_tbl[] = { + { 0x1028, 0x0001, 0x1028, 0x0001, 0, 0, 0 }, /* PERC 2/Si (Iguana/PERC2Si) */ + { 0x1028, 0x0002, 0x1028, 0x0002, 0, 0, 1 }, /* PERC 3/Di (Opal/PERC3Di) */ + { 0x1028, 0x0003, 0x1028, 0x0003, 0, 0, 2 }, /* PERC 3/Si (SlimFast/PERC3Si */ + { 0x1028, 0x0004, 0x1028, 0x00d0, 0, 0, 3 }, /* PERC 3/Di (Iguana FlipChip/PERC3DiF */ + { 0x1028, 0x0002, 0x1028, 0x00d1, 0, 0, 4 }, /* PERC 3/Di (Viper/PERC3DiV) */ + { 0x1028, 0x0002, 0x1028, 0x00d9, 0, 0, 5 }, /* PERC 3/Di (Lexus/PERC3DiL) */ + { 0x1028, 0x000a, 0x1028, 0x0106, 0, 0, 6 }, /* PERC 3/Di (Jaguar/PERC3DiJ) */ + { 0x1028, 0x000a, 0x1028, 0x011b, 0, 0, 7 }, /* PERC 3/Di (Dagger/PERC3DiD) */ + { 0x1028, 0x000a, 0x1028, 0x0121, 0, 0, 8 }, /* PERC 3/Di (Boxster/PERC3DiB) */ + { 0x9005, 0x0283, 0x9005, 0x0283, 0, 0, 9 }, /* catapult */ + { 0x9005, 0x0284, 0x9005, 0x0284, 0, 0, 10 }, /* tomcat */ + { 0x9005, 0x0285, 0x9005, 0x0286, 0, 0, 11 }, /* Adaptec 2120S (Crusader) */ + { 0x9005, 0x0285, 0x9005, 0x0285, 0, 0, 12 }, /* Adaptec 2200S (Vulcan) */ + { 0x9005, 0x0285, 0x9005, 0x0287, 0, 0, 13 }, /* Adaptec 2200S (Vulcan-2m) */ + { 0x9005, 0x0285, 0x17aa, 0x0286, 0, 0, 14 }, /* Legend S220 (Legend Crusader) */ + { 0x9005, 0x0285, 0x17aa, 0x0287, 0, 0, 15 }, /* Legend S230 (Legend Vulcan) */ + + { 0x9005, 0x0285, 0x9005, 0x0288, 0, 0, 16 }, /* Adaptec 3230S (Harrier) */ + { 0x9005, 0x0285, 0x9005, 0x0289, 0, 0, 17 }, /* Adaptec 3240S (Tornado) */ + { 0x9005, 0x0285, 0x9005, 0x028a, 0, 0, 18 }, /* ASR-2020ZCR SCSI PCI-X ZCR (Skyhawk) */ + { 0x9005, 0x0285, 0x9005, 0x028b, 0, 0, 19 }, /* ASR-2025ZCR SCSI SO-DIMM PCI-X ZCR (Terminator) */ + { 0x9005, 0x0286, 0x9005, 0x028c, 0, 0, 20 }, /* ASR-2230S + ASR-2230SLP PCI-X (Lancer) */ + { 0x9005, 0x0286, 0x9005, 0x028d, 0, 0, 21 }, /* ASR-2130S (Lancer) */ + { 0x9005, 0x0286, 0x9005, 0x029b, 0, 0, 22 }, /* AAR-2820SA (Intruder) */ + { 0x9005, 0x0286, 0x9005, 0x029c, 0, 0, 23 }, /* AAR-2620SA (Intruder) */ + { 0x9005, 0x0286, 0x9005, 0x029d, 0, 0, 24 }, /* AAR-2420SA (Intruder) */ + { 0x9005, 0x0286, 0x9005, 0x029e, 0, 0, 25 }, /* ICP9024RO (Lancer) */ + { 0x9005, 0x0286, 0x9005, 0x029f, 0, 0, 26 }, /* ICP9014RO (Lancer) */ + { 0x9005, 0x0286, 0x9005, 0x02a0, 0, 0, 27 }, /* ICP9047MA (Lancer) */ + { 0x9005, 0x0286, 0x9005, 0x02a1, 0, 0, 28 }, /* ICP9087MA (Lancer) */ + { 0x9005, 0x0286, 0x9005, 0x02a3, 0, 0, 29 }, /* ICP5445AU (Hurricane44) */ + { 0x9005, 0x0285, 0x9005, 0x02a4, 0, 0, 30 }, /* ICP9085LI (Marauder-X) */ + { 0x9005, 0x0285, 0x9005, 0x02a5, 0, 0, 31 }, /* ICP5085BR (Marauder-E) */ + { 0x9005, 0x0286, 0x9005, 0x02a6, 0, 0, 32 }, /* ICP9067MA (Intruder-6) */ + { 0x9005, 0x0287, 0x9005, 0x0800, 0, 0, 33 }, /* Themisto Jupiter Platform */ + { 0x9005, 0x0200, 0x9005, 0x0200, 0, 0, 33 }, /* Themisto Jupiter Platform */ + { 0x9005, 0x0286, 0x9005, 0x0800, 0, 0, 34 }, /* Callisto Jupiter Platform */ + { 0x9005, 0x0285, 0x9005, 0x028e, 0, 0, 35 }, /* ASR-2020SA SATA PCI-X ZCR (Skyhawk) */ + { 0x9005, 0x0285, 0x9005, 0x028f, 0, 0, 36 }, /* ASR-2025SA SATA SO-DIMM PCI-X ZCR (Terminator) */ + { 0x9005, 0x0285, 0x9005, 0x0290, 0, 0, 37 }, /* AAR-2410SA PCI SATA 4ch (Jaguar II) */ + { 0x9005, 0x0285, 0x1028, 0x0291, 0, 0, 38 }, /* CERC SATA RAID 2 PCI SATA 6ch (DellCorsair) */ + { 0x9005, 0x0285, 0x9005, 0x0292, 0, 0, 39 }, /* AAR-2810SA PCI SATA 8ch (Corsair-8) */ + { 0x9005, 0x0285, 0x9005, 0x0293, 0, 0, 40 }, /* AAR-21610SA PCI SATA 16ch (Corsair-16) */ + { 0x9005, 0x0285, 0x9005, 0x0294, 0, 0, 41 }, /* ESD SO-DIMM PCI-X SATA ZCR (Prowler) */ + { 0x9005, 0x0285, 0x103C, 0x3227, 0, 0, 42 }, /* AAR-2610SA PCI SATA 6ch */ + { 0x9005, 0x0285, 0x9005, 0x0296, 0, 0, 43 }, /* ASR-2240S (SabreExpress) */ + { 0x9005, 0x0285, 0x9005, 0x0297, 0, 0, 44 }, /* ASR-4005 */ + { 0x9005, 0x0285, 0x1014, 0x02F2, 0, 0, 45 }, /* IBM 8i (AvonPark) */ + { 0x9005, 0x0285, 0x1014, 0x0312, 0, 0, 45 }, /* IBM 8i (AvonPark Lite) */ + { 0x9005, 0x0286, 0x1014, 0x9580, 0, 0, 46 }, /* IBM 8k/8k-l8 (Aurora) */ + { 0x9005, 0x0286, 0x1014, 0x9540, 0, 0, 47 }, /* IBM 8k/8k-l4 (Aurora Lite) */ + { 0x9005, 0x0285, 0x9005, 0x0298, 0, 0, 48 }, /* ASR-4000 (BlackBird) */ + { 0x9005, 0x0285, 0x9005, 0x0299, 0, 0, 49 }, /* ASR-4800SAS (Marauder-X) */ + { 0x9005, 0x0285, 0x9005, 0x029a, 0, 0, 50 }, /* ASR-4805SAS (Marauder-E) */ + { 0x9005, 0x0286, 0x9005, 0x02a2, 0, 0, 51 }, /* ASR-3800 (Hurricane44) */ + + { 0x9005, 0x0285, 0x1028, 0x0287, 0, 0, 52 }, /* Perc 320/DC*/ + { 0x1011, 0x0046, 0x9005, 0x0365, 0, 0, 53 }, /* Adaptec 5400S (Mustang)*/ + { 0x1011, 0x0046, 0x9005, 0x0364, 0, 0, 54 }, /* Adaptec 5400S (Mustang)*/ + { 0x1011, 0x0046, 0x9005, 0x1364, 0, 0, 55 }, /* Dell PERC2/QC */ + { 0x1011, 0x0046, 0x103c, 0x10c2, 0, 0, 56 }, /* HP NetRAID-4M */ + + { 0x9005, 0x0285, 0x1028, PCI_ANY_ID, 0, 0, 57 }, /* Dell Catchall */ + { 0x9005, 0x0285, 0x17aa, PCI_ANY_ID, 0, 0, 58 }, /* Legend Catchall */ + { 0x9005, 0x0285, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 59 }, /* Adaptec Catch All */ + { 0x9005, 0x0286, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 60 }, /* Adaptec Rocket Catch All */ + { 0x9005, 0x0288, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 61 }, /* Adaptec NEMER/ARK Catch All */ + { 0x9005, 0x028b, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 62 }, /* Adaptec PMC Series 6 (Tupelo) */ + { 0x9005, 0x028c, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 63 }, /* Adaptec PMC Series 7 (Denali) */ + { 0x9005, 0x028d, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 64 }, /* Adaptec PMC Series 8 */ + { 0,} +}; +MODULE_DEVICE_TABLE(pci, aac_pci_tbl); + +/* + * dmb - For now we add the number of channels to this structure. + * In the future we should add a fib that reports the number of channels + * for the card. At that time we can remove the channels from here + */ +static struct aac_driver_ident aac_drivers[] = { + { aac_rx_init, "percraid", "DELL ", "PERCRAID ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG | AAC_QUIRK_SCSI_32 }, /* PERC 2/Si (Iguana/PERC2Si) */ + { aac_rx_init, "percraid", "DELL ", "PERCRAID ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG | AAC_QUIRK_SCSI_32 }, /* PERC 3/Di (Opal/PERC3Di) */ + { aac_rx_init, "percraid", "DELL ", "PERCRAID ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG | AAC_QUIRK_SCSI_32 }, /* PERC 3/Si (SlimFast/PERC3Si */ + { aac_rx_init, "percraid", "DELL ", "PERCRAID ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG | AAC_QUIRK_SCSI_32 }, /* PERC 3/Di (Iguana FlipChip/PERC3DiF */ + { aac_rx_init, "percraid", "DELL ", "PERCRAID ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG | AAC_QUIRK_SCSI_32 }, /* PERC 3/Di (Viper/PERC3DiV) */ + { aac_rx_init, "percraid", "DELL ", "PERCRAID ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG | AAC_QUIRK_SCSI_32 }, /* PERC 3/Di (Lexus/PERC3DiL) */ + { aac_rx_init, "percraid", "DELL ", "PERCRAID ", 1, AAC_QUIRK_31BIT | AAC_QUIRK_34SG | AAC_QUIRK_SCSI_32 }, /* PERC 3/Di (Jaguar/PERC3DiJ) */ + { aac_rx_init, "percraid", "DELL ", "PERCRAID ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG | AAC_QUIRK_SCSI_32 }, /* PERC 3/Di (Dagger/PERC3DiD) */ + { aac_rx_init, "percraid", "DELL ", "PERCRAID ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG | AAC_QUIRK_SCSI_32 }, /* PERC 3/Di (Boxster/PERC3DiB) */ + { aac_rx_init, "aacraid", "ADAPTEC ", "catapult ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG | AAC_QUIRK_SCSI_32 }, /* catapult */ + { aac_rx_init, "aacraid", "ADAPTEC ", "tomcat ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG | AAC_QUIRK_SCSI_32 }, /* tomcat */ + { aac_rx_init, "aacraid", "ADAPTEC ", "Adaptec 2120S ", 1, AAC_QUIRK_31BIT | AAC_QUIRK_34SG }, /* Adaptec 2120S (Crusader) */ + { aac_rx_init, "aacraid", "ADAPTEC ", "Adaptec 2200S ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG }, /* Adaptec 2200S (Vulcan) */ + { aac_rx_init, "aacraid", "ADAPTEC ", "Adaptec 2200S ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG | AAC_QUIRK_SCSI_32 }, /* Adaptec 2200S (Vulcan-2m) */ + { aac_rx_init, "aacraid", "Legend ", "Legend S220 ", 1, AAC_QUIRK_31BIT | AAC_QUIRK_34SG | AAC_QUIRK_SCSI_32 }, /* Legend S220 (Legend Crusader) */ + { aac_rx_init, "aacraid", "Legend ", "Legend S230 ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG | AAC_QUIRK_SCSI_32 }, /* Legend S230 (Legend Vulcan) */ + + { aac_rx_init, "aacraid", "ADAPTEC ", "Adaptec 3230S ", 2 }, /* Adaptec 3230S (Harrier) */ + { aac_rx_init, "aacraid", "ADAPTEC ", "Adaptec 3240S ", 2 }, /* Adaptec 3240S (Tornado) */ + { aac_rx_init, "aacraid", "ADAPTEC ", "ASR-2020ZCR ", 2 }, /* ASR-2020ZCR SCSI PCI-X ZCR (Skyhawk) */ + { aac_rx_init, "aacraid", "ADAPTEC ", "ASR-2025ZCR ", 2 }, /* ASR-2025ZCR SCSI SO-DIMM PCI-X ZCR (Terminator) */ + { aac_rkt_init, "aacraid", "ADAPTEC ", "ASR-2230S PCI-X ", 2 }, /* ASR-2230S + ASR-2230SLP PCI-X (Lancer) */ + { aac_rkt_init, "aacraid", "ADAPTEC ", "ASR-2130S PCI-X ", 1 }, /* ASR-2130S (Lancer) */ + { aac_rkt_init, "aacraid", "ADAPTEC ", "AAR-2820SA ", 1 }, /* AAR-2820SA (Intruder) */ + { aac_rkt_init, "aacraid", "ADAPTEC ", "AAR-2620SA ", 1 }, /* AAR-2620SA (Intruder) */ + { aac_rkt_init, "aacraid", "ADAPTEC ", "AAR-2420SA ", 1 }, /* AAR-2420SA (Intruder) */ + { aac_rkt_init, "aacraid", "ICP ", "ICP9024RO ", 2 }, /* ICP9024RO (Lancer) */ + { aac_rkt_init, "aacraid", "ICP ", "ICP9014RO ", 1 }, /* ICP9014RO (Lancer) */ + { aac_rkt_init, "aacraid", "ICP ", "ICP9047MA ", 1 }, /* ICP9047MA (Lancer) */ + { aac_rkt_init, "aacraid", "ICP ", "ICP9087MA ", 1 }, /* ICP9087MA (Lancer) */ + { aac_rkt_init, "aacraid", "ICP ", "ICP5445AU ", 1 }, /* ICP5445AU (Hurricane44) */ + { aac_rx_init, "aacraid", "ICP ", "ICP9085LI ", 1 }, /* ICP9085LI (Marauder-X) */ + { aac_rx_init, "aacraid", "ICP ", "ICP5085BR ", 1 }, /* ICP5085BR (Marauder-E) */ + { aac_rkt_init, "aacraid", "ICP ", "ICP9067MA ", 1 }, /* ICP9067MA (Intruder-6) */ + { NULL , "aacraid", "ADAPTEC ", "Themisto ", 0, AAC_QUIRK_SLAVE }, /* Jupiter Platform */ + { aac_rkt_init, "aacraid", "ADAPTEC ", "Callisto ", 2, AAC_QUIRK_MASTER }, /* Jupiter Platform */ + { aac_rx_init, "aacraid", "ADAPTEC ", "ASR-2020SA ", 1 }, /* ASR-2020SA SATA PCI-X ZCR (Skyhawk) */ + { aac_rx_init, "aacraid", "ADAPTEC ", "ASR-2025SA ", 1 }, /* ASR-2025SA SATA SO-DIMM PCI-X ZCR (Terminator) */ + { aac_rx_init, "aacraid", "ADAPTEC ", "AAR-2410SA SATA ", 1, AAC_QUIRK_17SG }, /* AAR-2410SA PCI SATA 4ch (Jaguar II) */ + { aac_rx_init, "aacraid", "DELL ", "CERC SR2 ", 1, AAC_QUIRK_17SG }, /* CERC SATA RAID 2 PCI SATA 6ch (DellCorsair) */ + { aac_rx_init, "aacraid", "ADAPTEC ", "AAR-2810SA SATA ", 1, AAC_QUIRK_17SG }, /* AAR-2810SA PCI SATA 8ch (Corsair-8) */ + { aac_rx_init, "aacraid", "ADAPTEC ", "AAR-21610SA SATA", 1, AAC_QUIRK_17SG }, /* AAR-21610SA PCI SATA 16ch (Corsair-16) */ + { aac_rx_init, "aacraid", "ADAPTEC ", "ASR-2026ZCR ", 1 }, /* ESD SO-DIMM PCI-X SATA ZCR (Prowler) */ + { aac_rx_init, "aacraid", "ADAPTEC ", "AAR-2610SA ", 1 }, /* SATA 6Ch (Bearcat) */ + { aac_rx_init, "aacraid", "ADAPTEC ", "ASR-2240S ", 1 }, /* ASR-2240S (SabreExpress) */ + { aac_rx_init, "aacraid", "ADAPTEC ", "ASR-4005 ", 1 }, /* ASR-4005 */ + { aac_rx_init, "ServeRAID","IBM ", "ServeRAID 8i ", 1 }, /* IBM 8i (AvonPark) */ + { aac_rkt_init, "ServeRAID","IBM ", "ServeRAID 8k-l8 ", 1 }, /* IBM 8k/8k-l8 (Aurora) */ + { aac_rkt_init, "ServeRAID","IBM ", "ServeRAID 8k-l4 ", 1 }, /* IBM 8k/8k-l4 (Aurora Lite) */ + { aac_rx_init, "aacraid", "ADAPTEC ", "ASR-4000 ", 1 }, /* ASR-4000 (BlackBird & AvonPark) */ + { aac_rx_init, "aacraid", "ADAPTEC ", "ASR-4800SAS ", 1 }, /* ASR-4800SAS (Marauder-X) */ + { aac_rx_init, "aacraid", "ADAPTEC ", "ASR-4805SAS ", 1 }, /* ASR-4805SAS (Marauder-E) */ + { aac_rkt_init, "aacraid", "ADAPTEC ", "ASR-3800 ", 1 }, /* ASR-3800 (Hurricane44) */ + + { aac_rx_init, "percraid", "DELL ", "PERC 320/DC ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG }, /* Perc 320/DC*/ + { aac_sa_init, "aacraid", "ADAPTEC ", "Adaptec 5400S ", 4, AAC_QUIRK_34SG }, /* Adaptec 5400S (Mustang)*/ + { aac_sa_init, "aacraid", "ADAPTEC ", "AAC-364 ", 4, AAC_QUIRK_34SG }, /* Adaptec 5400S (Mustang)*/ + { aac_sa_init, "percraid", "DELL ", "PERCRAID ", 4, AAC_QUIRK_34SG }, /* Dell PERC2/QC */ + { aac_sa_init, "hpnraid", "HP ", "NetRAID ", 4, AAC_QUIRK_34SG }, /* HP NetRAID-4M */ + + { aac_rx_init, "aacraid", "DELL ", "RAID ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG | AAC_QUIRK_SCSI_32 }, /* Dell Catchall */ + { aac_rx_init, "aacraid", "Legend ", "RAID ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG | AAC_QUIRK_SCSI_32 }, /* Legend Catchall */ + { aac_rx_init, "aacraid", "ADAPTEC ", "RAID ", 2 }, /* Adaptec Catch All */ + { aac_rkt_init, "aacraid", "ADAPTEC ", "RAID ", 2 }, /* Adaptec Rocket Catch All */ + { aac_nark_init, "aacraid", "ADAPTEC ", "RAID ", 2 }, /* Adaptec NEMER/ARK Catch All */ + { aac_src_init, "aacraid", "ADAPTEC ", "RAID ", 2, AAC_QUIRK_SRC }, /* Adaptec PMC Series 6 (Tupelo) */ + { aac_srcv_init, "aacraid", "ADAPTEC ", "RAID ", 2, AAC_QUIRK_SRC }, /* Adaptec PMC Series 7 (Denali) */ + { aac_srcv_init, "aacraid", "ADAPTEC ", "RAID ", 2, AAC_QUIRK_SRC }, /* Adaptec PMC Series 8 */ +}; + +/** + * aac_queuecommand - queue a SCSI command + * @shost: Scsi host to queue command on + * @cmd: SCSI command to queue + * + * Queues a command for execution by the associated Host Adapter. + * + * TODO: unify with aac_scsi_cmd(). + */ + +static int aac_queuecommand(struct Scsi_Host *shost, + struct scsi_cmnd *cmd) +{ + int r = 0; + cmd->SCp.phase = AAC_OWNER_LOWLEVEL; + r = (aac_scsi_cmd(cmd) ? FAILED : 0); + return r; +} + +/** + * aac_info - Returns the host adapter name + * @shost: Scsi host to report on + * + * Returns a static string describing the device in question + */ + +static const char *aac_info(struct Scsi_Host *shost) +{ + struct aac_dev *dev = (struct aac_dev *)shost->hostdata; + return aac_drivers[dev->cardtype].name; +} + +/** + * aac_get_driver_ident + * @devtype: index into lookup table + * + * Returns a pointer to the entry in the driver lookup table. + */ + +struct aac_driver_ident* aac_get_driver_ident(int devtype) +{ + return &aac_drivers[devtype]; +} + +/** + * aac_biosparm - return BIOS parameters for disk + * @sdev: The scsi device corresponding to the disk + * @bdev: the block device corresponding to the disk + * @capacity: the sector capacity of the disk + * @geom: geometry block to fill in + * + * Return the Heads/Sectors/Cylinders BIOS Disk Parameters for Disk. + * The default disk geometry is 64 heads, 32 sectors, and the appropriate + * number of cylinders so as not to exceed drive capacity. In order for + * disks equal to or larger than 1 GB to be addressable by the BIOS + * without exceeding the BIOS limitation of 1024 cylinders, Extended + * Translation should be enabled. With Extended Translation enabled, + * drives between 1 GB inclusive and 2 GB exclusive are given a disk + * geometry of 128 heads and 32 sectors, and drives above 2 GB inclusive + * are given a disk geometry of 255 heads and 63 sectors. However, if + * the BIOS detects that the Extended Translation setting does not match + * the geometry in the partition table, then the translation inferred + * from the partition table will be used by the BIOS, and a warning may + * be displayed. + */ + +static int aac_biosparm(struct scsi_device *sdev, struct block_device *bdev, + sector_t capacity, int *geom) +{ + struct diskparm *param = (struct diskparm *)geom; + unsigned char *buf; + + dprintk((KERN_DEBUG "aac_biosparm.\n")); + + /* + * Assuming extended translation is enabled - #REVISIT# + */ + if (capacity >= 2 * 1024 * 1024) { /* 1 GB in 512 byte sectors */ + if(capacity >= 4 * 1024 * 1024) { /* 2 GB in 512 byte sectors */ + param->heads = 255; + param->sectors = 63; + } else { + param->heads = 128; + param->sectors = 32; + } + } else { + param->heads = 64; + param->sectors = 32; + } + + param->cylinders = cap_to_cyls(capacity, param->heads * param->sectors); + + /* + * Read the first 1024 bytes from the disk device, if the boot + * sector partition table is valid, search for a partition table + * entry whose end_head matches one of the standard geometry + * translations ( 64/32, 128/32, 255/63 ). + */ + buf = scsi_bios_ptable(bdev); + if (!buf) + return 0; + if (*(__le16 *)(buf + 0x40) == cpu_to_le16(MSDOS_LABEL_MAGIC)) { + struct msdos_partition *first = (struct msdos_partition *)buf; + struct msdos_partition *entry = first; + int saved_cylinders = param->cylinders; + int num; + unsigned char end_head, end_sec; + + for(num = 0; num < 4; num++) { + end_head = entry->end_head; + end_sec = entry->end_sector & 0x3f; + + if(end_head == 63) { + param->heads = 64; + param->sectors = 32; + break; + } else if(end_head == 127) { + param->heads = 128; + param->sectors = 32; + break; + } else if(end_head == 254) { + param->heads = 255; + param->sectors = 63; + break; + } + entry++; + } + + if (num == 4) { + end_head = first->end_head; + end_sec = first->end_sector & 0x3f; + } + + param->cylinders = cap_to_cyls(capacity, param->heads * param->sectors); + if (num < 4 && end_sec == param->sectors) { + if (param->cylinders != saved_cylinders) { + dprintk((KERN_DEBUG "Adopting geometry: heads=%d, sectors=%d from partition table %d.\n", + param->heads, param->sectors, num)); + } + } else if (end_head > 0 || end_sec > 0) { + dprintk((KERN_DEBUG "Strange geometry: heads=%d, sectors=%d in partition table %d.\n", + end_head + 1, end_sec, num)); + dprintk((KERN_DEBUG "Using geometry: heads=%d, sectors=%d.\n", + param->heads, param->sectors)); + } + } + kfree(buf); + return 0; +} + +/** + * aac_slave_configure - compute queue depths + * @sdev: SCSI device we are considering + * + * Selects queue depths for each target device based on the host adapter's + * total capacity and the queue depth supported by the target device. + * A queue depth of one automatically disables tagged queueing. + */ + +static int aac_slave_configure(struct scsi_device *sdev) +{ + struct aac_dev *aac = (struct aac_dev *)sdev->host->hostdata; + int chn, tid; + unsigned int depth = 0; + unsigned int set_timeout = 0; + int timeout = 0; + bool set_qd_dev_type = false; + u8 devtype = 0; + + chn = aac_logical_to_phys(sdev_channel(sdev)); + tid = sdev_id(sdev); + if (chn < AAC_MAX_BUSES && tid < AAC_MAX_TARGETS && aac->sa_firmware) { + devtype = aac->hba_map[chn][tid].devtype; + + if (devtype == AAC_DEVTYPE_NATIVE_RAW) { + depth = aac->hba_map[chn][tid].qd_limit; + set_timeout = 1; + goto common_config; + } + if (devtype == AAC_DEVTYPE_ARC_RAW) { + set_qd_dev_type = true; + set_timeout = 1; + goto common_config; + } + } + + if (aac->jbod && (sdev->type == TYPE_DISK)) + sdev->removable = 1; + + if (sdev->type == TYPE_DISK + && sdev_channel(sdev) != CONTAINER_CHANNEL + && (!aac->jbod || sdev->inq_periph_qual) + && (!aac->raid_scsi_mode || (sdev_channel(sdev) != 2))) { + + if (expose_physicals == 0) + return -ENXIO; + + if (expose_physicals < 0) + sdev->no_uld_attach = 1; + } + + if (sdev->tagged_supported + && sdev->type == TYPE_DISK + && (!aac->raid_scsi_mode || (sdev_channel(sdev) != 2)) + && !sdev->no_uld_attach) { + + struct scsi_device * dev; + struct Scsi_Host *host = sdev->host; + unsigned num_lsu = 0; + unsigned num_one = 0; + unsigned cid; + + set_timeout = 1; + + for (cid = 0; cid < aac->maximum_num_containers; ++cid) + if (aac->fsa_dev[cid].valid) + ++num_lsu; + + __shost_for_each_device(dev, host) { + if (dev->tagged_supported + && dev->type == TYPE_DISK + && (!aac->raid_scsi_mode || (sdev_channel(sdev) != 2)) + && !dev->no_uld_attach) { + if ((sdev_channel(dev) != CONTAINER_CHANNEL) + || !aac->fsa_dev[sdev_id(dev)].valid) { + ++num_lsu; + } + } else { + ++num_one; + } + } + + if (num_lsu == 0) + ++num_lsu; + + depth = (host->can_queue - num_one) / num_lsu; + + if (sdev_channel(sdev) != NATIVE_CHANNEL) + goto common_config; + + set_qd_dev_type = true; + + } + +common_config: + + /* + * Check if SATA drive + */ + if (set_qd_dev_type) { + if (strncmp(sdev->vendor, "ATA", 3) == 0) + depth = 32; + else + depth = 64; + } + + /* + * Firmware has an individual device recovery time typically + * of 35 seconds, give us a margin. Thor devices can take longer in + * error recovery, hence different value. + */ + if (set_timeout) { + timeout = aac->sa_firmware ? AAC_SA_TIMEOUT : AAC_ARC_TIMEOUT; + blk_queue_rq_timeout(sdev->request_queue, timeout * HZ); + } + + if (depth > 256) + depth = 256; + else if (depth < 1) + depth = 1; + + scsi_change_queue_depth(sdev, depth); + + sdev->tagged_supported = 1; + + return 0; +} + +/** + * aac_change_queue_depth - alter queue depths + * @sdev: SCSI device we are considering + * @depth: desired queue depth + * + * Alters queue depths for target device based on the host adapter's + * total capacity and the queue depth supported by the target device. + */ + +static int aac_change_queue_depth(struct scsi_device *sdev, int depth) +{ + struct aac_dev *aac = (struct aac_dev *)(sdev->host->hostdata); + int chn, tid, is_native_device = 0; + + chn = aac_logical_to_phys(sdev_channel(sdev)); + tid = sdev_id(sdev); + if (chn < AAC_MAX_BUSES && tid < AAC_MAX_TARGETS && + aac->hba_map[chn][tid].devtype == AAC_DEVTYPE_NATIVE_RAW) + is_native_device = 1; + + if (sdev->tagged_supported && (sdev->type == TYPE_DISK) && + (sdev_channel(sdev) == CONTAINER_CHANNEL)) { + struct scsi_device * dev; + struct Scsi_Host *host = sdev->host; + unsigned num = 0; + + __shost_for_each_device(dev, host) { + if (dev->tagged_supported && (dev->type == TYPE_DISK) && + (sdev_channel(dev) == CONTAINER_CHANNEL)) + ++num; + ++num; + } + if (num >= host->can_queue) + num = host->can_queue - 1; + if (depth > (host->can_queue - num)) + depth = host->can_queue - num; + if (depth > 256) + depth = 256; + else if (depth < 2) + depth = 2; + return scsi_change_queue_depth(sdev, depth); + } else if (is_native_device) { + scsi_change_queue_depth(sdev, aac->hba_map[chn][tid].qd_limit); + } else { + scsi_change_queue_depth(sdev, 1); + } + return sdev->queue_depth; +} + +static ssize_t aac_show_raid_level(struct device *dev, struct device_attribute *attr, char *buf) +{ + struct scsi_device *sdev = to_scsi_device(dev); + struct aac_dev *aac = (struct aac_dev *)(sdev->host->hostdata); + if (sdev_channel(sdev) != CONTAINER_CHANNEL) + return snprintf(buf, PAGE_SIZE, sdev->no_uld_attach + ? "Hidden\n" : + ((aac->jbod && (sdev->type == TYPE_DISK)) ? "JBOD\n" : "")); + return snprintf(buf, PAGE_SIZE, "%s\n", + get_container_type(aac->fsa_dev[sdev_id(sdev)].type)); +} + +static struct device_attribute aac_raid_level_attr = { + .attr = { + .name = "level", + .mode = S_IRUGO, + }, + .show = aac_show_raid_level +}; + +static ssize_t aac_show_unique_id(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct scsi_device *sdev = to_scsi_device(dev); + struct aac_dev *aac = (struct aac_dev *)(sdev->host->hostdata); + unsigned char sn[16]; + + memset(sn, 0, sizeof(sn)); + + if (sdev_channel(sdev) == CONTAINER_CHANNEL) + memcpy(sn, aac->fsa_dev[sdev_id(sdev)].identifier, sizeof(sn)); + + return snprintf(buf, 16 * 2 + 2, + "%02X%02X%02X%02X%02X%02X%02X%02X%02X%02X%02X%02X%02X%02X%02X%02X\n", + sn[0], sn[1], sn[2], sn[3], + sn[4], sn[5], sn[6], sn[7], + sn[8], sn[9], sn[10], sn[11], + sn[12], sn[13], sn[14], sn[15]); +} + +static struct device_attribute aac_unique_id_attr = { + .attr = { + .name = "unique_id", + .mode = 0444, + }, + .show = aac_show_unique_id +}; + + + +static struct device_attribute *aac_dev_attrs[] = { + &aac_raid_level_attr, + &aac_unique_id_attr, + NULL, +}; + +static int aac_ioctl(struct scsi_device *sdev, unsigned int cmd, + void __user *arg) +{ + int retval; + struct aac_dev *dev = (struct aac_dev *)sdev->host->hostdata; + if (!capable(CAP_SYS_RAWIO)) + return -EPERM; + retval = aac_adapter_check_health(dev); + if (retval) + return -EBUSY; + return aac_do_ioctl(dev, cmd, arg); +} + +struct fib_count_data { + int mlcnt; + int llcnt; + int ehcnt; + int fwcnt; + int krlcnt; +}; + +static bool fib_count_iter(struct scsi_cmnd *scmnd, void *data, bool reserved) +{ + struct fib_count_data *fib_count = data; + + switch (scmnd->SCp.phase) { + case AAC_OWNER_FIRMWARE: + fib_count->fwcnt++; + break; + case AAC_OWNER_ERROR_HANDLER: + fib_count->ehcnt++; + break; + case AAC_OWNER_LOWLEVEL: + fib_count->llcnt++; + break; + case AAC_OWNER_MIDLEVEL: + fib_count->mlcnt++; + break; + default: + fib_count->krlcnt++; + break; + } + return true; +} + +/* Called during SCSI EH, so we don't need to block requests */ +static int get_num_of_incomplete_fibs(struct aac_dev *aac) +{ + struct Scsi_Host *shost = aac->scsi_host_ptr; + struct device *ctrl_dev; + struct fib_count_data fcnt = { }; + + scsi_host_busy_iter(shost, fib_count_iter, &fcnt); + + ctrl_dev = &aac->pdev->dev; + + dev_info(ctrl_dev, "outstanding cmd: midlevel-%d\n", fcnt.mlcnt); + dev_info(ctrl_dev, "outstanding cmd: lowlevel-%d\n", fcnt.llcnt); + dev_info(ctrl_dev, "outstanding cmd: error handler-%d\n", fcnt.ehcnt); + dev_info(ctrl_dev, "outstanding cmd: firmware-%d\n", fcnt.fwcnt); + dev_info(ctrl_dev, "outstanding cmd: kernel-%d\n", fcnt.krlcnt); + + return fcnt.mlcnt + fcnt.llcnt + fcnt.ehcnt + fcnt.fwcnt; +} + +static int aac_eh_abort(struct scsi_cmnd* cmd) +{ + struct scsi_device * dev = cmd->device; + struct Scsi_Host * host = dev->host; + struct aac_dev * aac = (struct aac_dev *)host->hostdata; + int count, found; + u32 bus, cid; + int ret = FAILED; + + if (aac_adapter_check_health(aac)) + return ret; + + bus = aac_logical_to_phys(scmd_channel(cmd)); + cid = scmd_id(cmd); + if (aac->hba_map[bus][cid].devtype == AAC_DEVTYPE_NATIVE_RAW) { + struct fib *fib; + struct aac_hba_tm_req *tmf; + int status; + u64 address; + + pr_err("%s: Host adapter abort request (%d,%d,%d,%d)\n", + AAC_DRIVERNAME, + host->host_no, sdev_channel(dev), sdev_id(dev), (int)dev->lun); + + found = 0; + for (count = 0; count < (host->can_queue + AAC_NUM_MGT_FIB); ++count) { + fib = &aac->fibs[count]; + if (*(u8 *)fib->hw_fib_va != 0 && + (fib->flags & FIB_CONTEXT_FLAG_NATIVE_HBA) && + (fib->callback_data == cmd)) { + found = 1; + break; + } + } + if (!found) + return ret; + + /* start a HBA_TMF_ABORT_TASK TMF request */ + fib = aac_fib_alloc(aac); + if (!fib) + return ret; + + tmf = (struct aac_hba_tm_req *)fib->hw_fib_va; + memset(tmf, 0, sizeof(*tmf)); + tmf->tmf = HBA_TMF_ABORT_TASK; + tmf->it_nexus = aac->hba_map[bus][cid].rmw_nexus; + tmf->lun[1] = cmd->device->lun; + + address = (u64)fib->hw_error_pa; + tmf->error_ptr_hi = cpu_to_le32((u32)(address >> 32)); + tmf->error_ptr_lo = cpu_to_le32((u32)(address & 0xffffffff)); + tmf->error_length = cpu_to_le32(FW_ERROR_BUFFER_SIZE); + + fib->hbacmd_size = sizeof(*tmf); + cmd->SCp.sent_command = 0; + + status = aac_hba_send(HBA_IU_TYPE_SCSI_TM_REQ, fib, + (fib_callback) aac_hba_callback, + (void *) cmd); + if (status != -EINPROGRESS) { + aac_fib_complete(fib); + aac_fib_free(fib); + return ret; + } + /* Wait up to 15 secs for completion */ + for (count = 0; count < 15; ++count) { + if (cmd->SCp.sent_command) { + ret = SUCCESS; + break; + } + msleep(1000); + } + + if (ret != SUCCESS) + pr_err("%s: Host adapter abort request timed out\n", + AAC_DRIVERNAME); + } else { + pr_err( + "%s: Host adapter abort request.\n" + "%s: Outstanding commands on (%d,%d,%d,%d):\n", + AAC_DRIVERNAME, AAC_DRIVERNAME, + host->host_no, sdev_channel(dev), sdev_id(dev), + (int)dev->lun); + switch (cmd->cmnd[0]) { + case SERVICE_ACTION_IN_16: + if (!(aac->raw_io_interface) || + !(aac->raw_io_64) || + ((cmd->cmnd[1] & 0x1f) != SAI_READ_CAPACITY_16)) + break; + fallthrough; + case INQUIRY: + case READ_CAPACITY: + /* + * Mark associated FIB to not complete, + * eh handler does this + */ + for (count = 0; + count < (host->can_queue + AAC_NUM_MGT_FIB); + ++count) { + struct fib *fib = &aac->fibs[count]; + + if (fib->hw_fib_va->header.XferState && + (fib->flags & FIB_CONTEXT_FLAG) && + (fib->callback_data == cmd)) { + fib->flags |= + FIB_CONTEXT_FLAG_TIMED_OUT; + cmd->SCp.phase = + AAC_OWNER_ERROR_HANDLER; + ret = SUCCESS; + } + } + break; + case TEST_UNIT_READY: + /* + * Mark associated FIB to not complete, + * eh handler does this + */ + for (count = 0; + count < (host->can_queue + AAC_NUM_MGT_FIB); + ++count) { + struct scsi_cmnd *command; + struct fib *fib = &aac->fibs[count]; + + command = fib->callback_data; + + if ((fib->hw_fib_va->header.XferState & + cpu_to_le32 + (Async | NoResponseExpected)) && + (fib->flags & FIB_CONTEXT_FLAG) && + ((command)) && + (command->device == cmd->device)) { + fib->flags |= + FIB_CONTEXT_FLAG_TIMED_OUT; + command->SCp.phase = + AAC_OWNER_ERROR_HANDLER; + if (command == cmd) + ret = SUCCESS; + } + } + break; + } + } + return ret; +} + +static u8 aac_eh_tmf_lun_reset_fib(struct aac_hba_map_info *info, + struct fib *fib, u64 tmf_lun) +{ + struct aac_hba_tm_req *tmf; + u64 address; + + /* start a HBA_TMF_LUN_RESET TMF request */ + tmf = (struct aac_hba_tm_req *)fib->hw_fib_va; + memset(tmf, 0, sizeof(*tmf)); + tmf->tmf = HBA_TMF_LUN_RESET; + tmf->it_nexus = info->rmw_nexus; + int_to_scsilun(tmf_lun, (struct scsi_lun *)tmf->lun); + + address = (u64)fib->hw_error_pa; + tmf->error_ptr_hi = cpu_to_le32 + ((u32)(address >> 32)); + tmf->error_ptr_lo = cpu_to_le32 + ((u32)(address & 0xffffffff)); + tmf->error_length = cpu_to_le32(FW_ERROR_BUFFER_SIZE); + fib->hbacmd_size = sizeof(*tmf); + + return HBA_IU_TYPE_SCSI_TM_REQ; +} + +static u8 aac_eh_tmf_hard_reset_fib(struct aac_hba_map_info *info, + struct fib *fib) +{ + struct aac_hba_reset_req *rst; + u64 address; + + /* already tried, start a hard reset now */ + rst = (struct aac_hba_reset_req *)fib->hw_fib_va; + memset(rst, 0, sizeof(*rst)); + rst->it_nexus = info->rmw_nexus; + + address = (u64)fib->hw_error_pa; + rst->error_ptr_hi = cpu_to_le32((u32)(address >> 32)); + rst->error_ptr_lo = cpu_to_le32((u32)(address & 0xffffffff)); + rst->error_length = cpu_to_le32(FW_ERROR_BUFFER_SIZE); + fib->hbacmd_size = sizeof(*rst); + + return HBA_IU_TYPE_SATA_REQ; +} + +static void aac_tmf_callback(void *context, struct fib *fibptr) +{ + struct aac_hba_resp *err = + &((struct aac_native_hba *)fibptr->hw_fib_va)->resp.err; + struct aac_hba_map_info *info = context; + int res; + + switch (err->service_response) { + case HBA_RESP_SVCRES_TMF_REJECTED: + res = -1; + break; + case HBA_RESP_SVCRES_TMF_LUN_INVALID: + res = 0; + break; + case HBA_RESP_SVCRES_TMF_COMPLETE: + case HBA_RESP_SVCRES_TMF_SUCCEEDED: + res = 0; + break; + default: + res = -2; + break; + } + aac_fib_complete(fibptr); + + info->reset_state = res; +} + +/* + * aac_eh_dev_reset - Device reset command handling + * @scsi_cmd: SCSI command block causing the reset + * + */ +static int aac_eh_dev_reset(struct scsi_cmnd *cmd) +{ + struct scsi_device * dev = cmd->device; + struct Scsi_Host * host = dev->host; + struct aac_dev * aac = (struct aac_dev *)host->hostdata; + struct aac_hba_map_info *info; + int count; + u32 bus, cid; + struct fib *fib; + int ret = FAILED; + int status; + u8 command; + + bus = aac_logical_to_phys(scmd_channel(cmd)); + cid = scmd_id(cmd); + + if (bus >= AAC_MAX_BUSES || cid >= AAC_MAX_TARGETS) + return FAILED; + + info = &aac->hba_map[bus][cid]; + + if (!(info->devtype == AAC_DEVTYPE_NATIVE_RAW && + !(info->reset_state > 0))) + return FAILED; + + pr_err("%s: Host device reset request. SCSI hang ?\n", + AAC_DRIVERNAME); + + fib = aac_fib_alloc(aac); + if (!fib) + return ret; + + /* start a HBA_TMF_LUN_RESET TMF request */ + command = aac_eh_tmf_lun_reset_fib(info, fib, dev->lun); + + info->reset_state = 1; + + status = aac_hba_send(command, fib, + (fib_callback) aac_tmf_callback, + (void *) info); + if (status != -EINPROGRESS) { + info->reset_state = 0; + aac_fib_complete(fib); + aac_fib_free(fib); + return ret; + } + /* Wait up to 15 seconds for completion */ + for (count = 0; count < 15; ++count) { + if (info->reset_state == 0) { + ret = info->reset_state == 0 ? SUCCESS : FAILED; + break; + } + msleep(1000); + } + + return ret; +} + +/* + * aac_eh_target_reset - Target reset command handling + * @scsi_cmd: SCSI command block causing the reset + * + */ +static int aac_eh_target_reset(struct scsi_cmnd *cmd) +{ + struct scsi_device * dev = cmd->device; + struct Scsi_Host * host = dev->host; + struct aac_dev * aac = (struct aac_dev *)host->hostdata; + struct aac_hba_map_info *info; + int count; + u32 bus, cid; + int ret = FAILED; + struct fib *fib; + int status; + u8 command; + + bus = aac_logical_to_phys(scmd_channel(cmd)); + cid = scmd_id(cmd); + + if (bus >= AAC_MAX_BUSES || cid >= AAC_MAX_TARGETS) + return FAILED; + + info = &aac->hba_map[bus][cid]; + + if (!(info->devtype == AAC_DEVTYPE_NATIVE_RAW && + !(info->reset_state > 0))) + return FAILED; + + pr_err("%s: Host target reset request. SCSI hang ?\n", + AAC_DRIVERNAME); + + fib = aac_fib_alloc(aac); + if (!fib) + return ret; + + + /* already tried, start a hard reset now */ + command = aac_eh_tmf_hard_reset_fib(info, fib); + + info->reset_state = 2; + + status = aac_hba_send(command, fib, + (fib_callback) aac_tmf_callback, + (void *) info); + + if (status != -EINPROGRESS) { + info->reset_state = 0; + aac_fib_complete(fib); + aac_fib_free(fib); + return ret; + } + + /* Wait up to 15 seconds for completion */ + for (count = 0; count < 15; ++count) { + if (info->reset_state <= 0) { + ret = info->reset_state == 0 ? SUCCESS : FAILED; + break; + } + msleep(1000); + } + + return ret; +} + +/* + * aac_eh_bus_reset - Bus reset command handling + * @scsi_cmd: SCSI command block causing the reset + * + */ +static int aac_eh_bus_reset(struct scsi_cmnd* cmd) +{ + struct scsi_device * dev = cmd->device; + struct Scsi_Host * host = dev->host; + struct aac_dev * aac = (struct aac_dev *)host->hostdata; + int count; + u32 cmd_bus; + int status = 0; + + + cmd_bus = aac_logical_to_phys(scmd_channel(cmd)); + /* Mark the assoc. FIB to not complete, eh handler does this */ + for (count = 0; count < (host->can_queue + AAC_NUM_MGT_FIB); ++count) { + struct fib *fib = &aac->fibs[count]; + + if (fib->hw_fib_va->header.XferState && + (fib->flags & FIB_CONTEXT_FLAG) && + (fib->flags & FIB_CONTEXT_FLAG_SCSI_CMD)) { + struct aac_hba_map_info *info; + u32 bus, cid; + + cmd = (struct scsi_cmnd *)fib->callback_data; + bus = aac_logical_to_phys(scmd_channel(cmd)); + if (bus != cmd_bus) + continue; + cid = scmd_id(cmd); + info = &aac->hba_map[bus][cid]; + if (bus >= AAC_MAX_BUSES || cid >= AAC_MAX_TARGETS || + info->devtype != AAC_DEVTYPE_NATIVE_RAW) { + fib->flags |= FIB_CONTEXT_FLAG_EH_RESET; + cmd->SCp.phase = AAC_OWNER_ERROR_HANDLER; + } + } + } + + pr_err("%s: Host bus reset request. SCSI hang ?\n", AAC_DRIVERNAME); + + /* + * Check the health of the controller + */ + status = aac_adapter_check_health(aac); + if (status) + dev_err(&aac->pdev->dev, "Adapter health - %d\n", status); + + count = get_num_of_incomplete_fibs(aac); + return (count == 0) ? SUCCESS : FAILED; +} + +/* + * aac_eh_host_reset - Host reset command handling + * @scsi_cmd: SCSI command block causing the reset + * + */ +static int aac_eh_host_reset(struct scsi_cmnd *cmd) +{ + struct scsi_device * dev = cmd->device; + struct Scsi_Host * host = dev->host; + struct aac_dev * aac = (struct aac_dev *)host->hostdata; + int ret = FAILED; + __le32 supported_options2 = 0; + bool is_mu_reset; + bool is_ignore_reset; + bool is_doorbell_reset; + + /* + * Check if reset is supported by the firmware + */ + supported_options2 = aac->supplement_adapter_info.supported_options2; + is_mu_reset = supported_options2 & AAC_OPTION_MU_RESET; + is_doorbell_reset = supported_options2 & AAC_OPTION_DOORBELL_RESET; + is_ignore_reset = supported_options2 & AAC_OPTION_IGNORE_RESET; + /* + * This adapter needs a blind reset, only do so for + * Adapters that support a register, instead of a commanded, + * reset. + */ + if ((is_mu_reset || is_doorbell_reset) + && aac_check_reset + && (aac_check_reset != -1 || !is_ignore_reset)) { + /* Bypass wait for command quiesce */ + if (aac_reset_adapter(aac, 2, IOP_HWSOFT_RESET) == 0) + ret = SUCCESS; + } + /* + * Reset EH state + */ + if (ret == SUCCESS) { + int bus, cid; + struct aac_hba_map_info *info; + + for (bus = 0; bus < AAC_MAX_BUSES; bus++) { + for (cid = 0; cid < AAC_MAX_TARGETS; cid++) { + info = &aac->hba_map[bus][cid]; + if (info->devtype == AAC_DEVTYPE_NATIVE_RAW) + info->reset_state = 0; + } + } + } + return ret; +} + +/** + * aac_cfg_open - open a configuration file + * @inode: inode being opened + * @file: file handle attached + * + * Called when the configuration device is opened. Does the needed + * set up on the handle and then returns + * + * Bugs: This needs extending to check a given adapter is present + * so we can support hot plugging, and to ref count adapters. + */ + +static int aac_cfg_open(struct inode *inode, struct file *file) +{ + struct aac_dev *aac; + unsigned minor_number = iminor(inode); + int err = -ENODEV; + + mutex_lock(&aac_mutex); /* BKL pushdown: nothing else protects this list */ + list_for_each_entry(aac, &aac_devices, entry) { + if (aac->id == minor_number) { + file->private_data = aac; + err = 0; + break; + } + } + mutex_unlock(&aac_mutex); + + return err; +} + +/** + * aac_cfg_ioctl - AAC configuration request + * @file: file handle + * @cmd: ioctl command code + * @arg: argument + * + * Handles a configuration ioctl. Currently this involves wrapping it + * up and feeding it into the nasty windowsalike glue layer. + * + * Bugs: Needs locking against parallel ioctls lower down + * Bugs: Needs to handle hot plugging + */ + +static long aac_cfg_ioctl(struct file *file, + unsigned int cmd, unsigned long arg) +{ + struct aac_dev *aac = (struct aac_dev *)file->private_data; + + if (!capable(CAP_SYS_RAWIO)) + return -EPERM; + + return aac_do_ioctl(aac, cmd, (void __user *)arg); +} + +static ssize_t aac_show_model(struct device *device, + struct device_attribute *attr, char *buf) +{ + struct aac_dev *dev = (struct aac_dev*)class_to_shost(device)->hostdata; + int len; + + if (dev->supplement_adapter_info.adapter_type_text[0]) { + char *cp = dev->supplement_adapter_info.adapter_type_text; + while (*cp && *cp != ' ') + ++cp; + while (*cp == ' ') + ++cp; + len = snprintf(buf, PAGE_SIZE, "%s\n", cp); + } else + len = snprintf(buf, PAGE_SIZE, "%s\n", + aac_drivers[dev->cardtype].model); + return len; +} + +static ssize_t aac_show_vendor(struct device *device, + struct device_attribute *attr, char *buf) +{ + struct aac_dev *dev = (struct aac_dev*)class_to_shost(device)->hostdata; + struct aac_supplement_adapter_info *sup_adap_info; + int len; + + sup_adap_info = &dev->supplement_adapter_info; + if (sup_adap_info->adapter_type_text[0]) { + char *cp = sup_adap_info->adapter_type_text; + while (*cp && *cp != ' ') + ++cp; + len = snprintf(buf, PAGE_SIZE, "%.*s\n", + (int)(cp - (char *)sup_adap_info->adapter_type_text), + sup_adap_info->adapter_type_text); + } else + len = snprintf(buf, PAGE_SIZE, "%s\n", + aac_drivers[dev->cardtype].vname); + return len; +} + +static ssize_t aac_show_flags(struct device *cdev, + struct device_attribute *attr, char *buf) +{ + int len = 0; + struct aac_dev *dev = (struct aac_dev*)class_to_shost(cdev)->hostdata; + + if (nblank(dprintk(x))) + len = snprintf(buf, PAGE_SIZE, "dprintk\n"); +#ifdef AAC_DETAILED_STATUS_INFO + len += scnprintf(buf + len, PAGE_SIZE - len, + "AAC_DETAILED_STATUS_INFO\n"); +#endif + if (dev->raw_io_interface && dev->raw_io_64) + len += scnprintf(buf + len, PAGE_SIZE - len, + "SAI_READ_CAPACITY_16\n"); + if (dev->jbod) + len += scnprintf(buf + len, PAGE_SIZE - len, + "SUPPORTED_JBOD\n"); + if (dev->supplement_adapter_info.supported_options2 & + AAC_OPTION_POWER_MANAGEMENT) + len += scnprintf(buf + len, PAGE_SIZE - len, + "SUPPORTED_POWER_MANAGEMENT\n"); + if (dev->msi) + len += scnprintf(buf + len, PAGE_SIZE - len, "PCI_HAS_MSI\n"); + return len; +} + +static ssize_t aac_show_kernel_version(struct device *device, + struct device_attribute *attr, + char *buf) +{ + struct aac_dev *dev = (struct aac_dev*)class_to_shost(device)->hostdata; + int len, tmp; + + tmp = le32_to_cpu(dev->adapter_info.kernelrev); + len = snprintf(buf, PAGE_SIZE, "%d.%d-%d[%d]\n", + tmp >> 24, (tmp >> 16) & 0xff, tmp & 0xff, + le32_to_cpu(dev->adapter_info.kernelbuild)); + return len; +} + +static ssize_t aac_show_monitor_version(struct device *device, + struct device_attribute *attr, + char *buf) +{ + struct aac_dev *dev = (struct aac_dev*)class_to_shost(device)->hostdata; + int len, tmp; + + tmp = le32_to_cpu(dev->adapter_info.monitorrev); + len = snprintf(buf, PAGE_SIZE, "%d.%d-%d[%d]\n", + tmp >> 24, (tmp >> 16) & 0xff, tmp & 0xff, + le32_to_cpu(dev->adapter_info.monitorbuild)); + return len; +} + +static ssize_t aac_show_bios_version(struct device *device, + struct device_attribute *attr, + char *buf) +{ + struct aac_dev *dev = (struct aac_dev*)class_to_shost(device)->hostdata; + int len, tmp; + + tmp = le32_to_cpu(dev->adapter_info.biosrev); + len = snprintf(buf, PAGE_SIZE, "%d.%d-%d[%d]\n", + tmp >> 24, (tmp >> 16) & 0xff, tmp & 0xff, + le32_to_cpu(dev->adapter_info.biosbuild)); + return len; +} + +static ssize_t aac_show_driver_version(struct device *device, + struct device_attribute *attr, + char *buf) +{ + return snprintf(buf, PAGE_SIZE, "%s\n", aac_driver_version); +} + +static ssize_t aac_show_serial_number(struct device *device, + struct device_attribute *attr, char *buf) +{ + struct aac_dev *dev = (struct aac_dev*)class_to_shost(device)->hostdata; + int len = 0; + + if (le32_to_cpu(dev->adapter_info.serial[0]) != 0xBAD0) + len = snprintf(buf, 16, "%06X\n", + le32_to_cpu(dev->adapter_info.serial[0])); + if (len && + !memcmp(&dev->supplement_adapter_info.mfg_pcba_serial_no[ + sizeof(dev->supplement_adapter_info.mfg_pcba_serial_no)-len], + buf, len-1)) + len = snprintf(buf, 16, "%.*s\n", + (int)sizeof(dev->supplement_adapter_info.mfg_pcba_serial_no), + dev->supplement_adapter_info.mfg_pcba_serial_no); + + return min(len, 16); +} + +static ssize_t aac_show_max_channel(struct device *device, + struct device_attribute *attr, char *buf) +{ + return snprintf(buf, PAGE_SIZE, "%d\n", + class_to_shost(device)->max_channel); +} + +static ssize_t aac_show_max_id(struct device *device, + struct device_attribute *attr, char *buf) +{ + return snprintf(buf, PAGE_SIZE, "%d\n", + class_to_shost(device)->max_id); +} + +static ssize_t aac_store_reset_adapter(struct device *device, + struct device_attribute *attr, + const char *buf, size_t count) +{ + int retval = -EACCES; + + if (!capable(CAP_SYS_ADMIN)) + return retval; + + retval = aac_reset_adapter(shost_priv(class_to_shost(device)), + buf[0] == '!', IOP_HWSOFT_RESET); + if (retval >= 0) + retval = count; + + return retval; +} + +static ssize_t aac_show_reset_adapter(struct device *device, + struct device_attribute *attr, + char *buf) +{ + struct aac_dev *dev = (struct aac_dev*)class_to_shost(device)->hostdata; + int len, tmp; + + tmp = aac_adapter_check_health(dev); + if ((tmp == 0) && dev->in_reset) + tmp = -EBUSY; + len = snprintf(buf, PAGE_SIZE, "0x%x\n", tmp); + return len; +} + +static struct device_attribute aac_model = { + .attr = { + .name = "model", + .mode = S_IRUGO, + }, + .show = aac_show_model, +}; +static struct device_attribute aac_vendor = { + .attr = { + .name = "vendor", + .mode = S_IRUGO, + }, + .show = aac_show_vendor, +}; +static struct device_attribute aac_flags = { + .attr = { + .name = "flags", + .mode = S_IRUGO, + }, + .show = aac_show_flags, +}; +static struct device_attribute aac_kernel_version = { + .attr = { + .name = "hba_kernel_version", + .mode = S_IRUGO, + }, + .show = aac_show_kernel_version, +}; +static struct device_attribute aac_monitor_version = { + .attr = { + .name = "hba_monitor_version", + .mode = S_IRUGO, + }, + .show = aac_show_monitor_version, +}; +static struct device_attribute aac_bios_version = { + .attr = { + .name = "hba_bios_version", + .mode = S_IRUGO, + }, + .show = aac_show_bios_version, +}; +static struct device_attribute aac_lld_version = { + .attr = { + .name = "driver_version", + .mode = 0444, + }, + .show = aac_show_driver_version, +}; +static struct device_attribute aac_serial_number = { + .attr = { + .name = "serial_number", + .mode = S_IRUGO, + }, + .show = aac_show_serial_number, +}; +static struct device_attribute aac_max_channel = { + .attr = { + .name = "max_channel", + .mode = S_IRUGO, + }, + .show = aac_show_max_channel, +}; +static struct device_attribute aac_max_id = { + .attr = { + .name = "max_id", + .mode = S_IRUGO, + }, + .show = aac_show_max_id, +}; +static struct device_attribute aac_reset = { + .attr = { + .name = "reset_host", + .mode = S_IWUSR|S_IRUGO, + }, + .store = aac_store_reset_adapter, + .show = aac_show_reset_adapter, +}; + +static struct device_attribute *aac_attrs[] = { + &aac_model, + &aac_vendor, + &aac_flags, + &aac_kernel_version, + &aac_monitor_version, + &aac_bios_version, + &aac_lld_version, + &aac_serial_number, + &aac_max_channel, + &aac_max_id, + &aac_reset, + NULL +}; + +ssize_t aac_get_serial_number(struct device *device, char *buf) +{ + return aac_show_serial_number(device, &aac_serial_number, buf); +} + +static const struct file_operations aac_cfg_fops = { + .owner = THIS_MODULE, + .unlocked_ioctl = aac_cfg_ioctl, +#ifdef CONFIG_COMPAT + .compat_ioctl = aac_cfg_ioctl, +#endif + .open = aac_cfg_open, + .llseek = noop_llseek, +}; + +static struct scsi_host_template aac_driver_template = { + .module = THIS_MODULE, + .name = "AAC", + .proc_name = AAC_DRIVERNAME, + .info = aac_info, + .ioctl = aac_ioctl, +#ifdef CONFIG_COMPAT + .compat_ioctl = aac_ioctl, +#endif + .queuecommand = aac_queuecommand, + .bios_param = aac_biosparm, + .shost_attrs = aac_attrs, + .slave_configure = aac_slave_configure, + .change_queue_depth = aac_change_queue_depth, + .sdev_attrs = aac_dev_attrs, + .eh_abort_handler = aac_eh_abort, + .eh_device_reset_handler = aac_eh_dev_reset, + .eh_target_reset_handler = aac_eh_target_reset, + .eh_bus_reset_handler = aac_eh_bus_reset, + .eh_host_reset_handler = aac_eh_host_reset, + .can_queue = AAC_NUM_IO_FIB, + .this_id = MAXIMUM_NUM_CONTAINERS, + .sg_tablesize = 16, + .max_sectors = 128, +#if (AAC_NUM_IO_FIB > 256) + .cmd_per_lun = 256, +#else + .cmd_per_lun = AAC_NUM_IO_FIB, +#endif + .emulated = 1, + .no_write_same = 1, +}; + +static void __aac_shutdown(struct aac_dev * aac) +{ + int i; + + mutex_lock(&aac->ioctl_mutex); + aac->adapter_shutdown = 1; + mutex_unlock(&aac->ioctl_mutex); + + if (aac->aif_thread) { + int i; + /* Clear out events first */ + for (i = 0; i < (aac->scsi_host_ptr->can_queue + AAC_NUM_MGT_FIB); i++) { + struct fib *fib = &aac->fibs[i]; + if (!(fib->hw_fib_va->header.XferState & cpu_to_le32(NoResponseExpected | Async)) && + (fib->hw_fib_va->header.XferState & cpu_to_le32(ResponseExpected))) + complete(&fib->event_wait); + } + kthread_stop(aac->thread); + aac->thread = NULL; + } + + aac_send_shutdown(aac); + + aac_adapter_disable_int(aac); + + if (aac_is_src(aac)) { + if (aac->max_msix > 1) { + for (i = 0; i < aac->max_msix; i++) { + free_irq(pci_irq_vector(aac->pdev, i), + &(aac->aac_msix[i])); + } + } else { + free_irq(aac->pdev->irq, + &(aac->aac_msix[0])); + } + } else { + free_irq(aac->pdev->irq, aac); + } + if (aac->msi) + pci_disable_msi(aac->pdev); + else if (aac->max_msix > 1) + pci_disable_msix(aac->pdev); +} +static void aac_init_char(void) +{ + aac_cfg_major = register_chrdev(0, "aac", &aac_cfg_fops); + if (aac_cfg_major < 0) { + pr_err("aacraid: unable to register \"aac\" device.\n"); + } +} + +void aac_reinit_aif(struct aac_dev *aac, unsigned int index) +{ + /* + * Firmware may send a AIF messages very early and the Driver may have + * ignored as it is not fully ready to process the messages. Send + * AIF to firmware so that if there are any unprocessed events they + * can be processed now. + */ + if (aac_drivers[index].quirks & AAC_QUIRK_SRC) + aac_intr_normal(aac, 0, 2, 0, NULL); + +} + +static int aac_probe_one(struct pci_dev *pdev, const struct pci_device_id *id) +{ + unsigned index = id->driver_data; + struct Scsi_Host *shost; + struct aac_dev *aac; + struct list_head *insert = &aac_devices; + int error; + int unique_id = 0; + u64 dmamask; + int mask_bits = 0; + extern int aac_sync_mode; + + /* + * Only series 7 needs freset. + */ + if (pdev->device == PMC_DEVICE_S7) + pdev->needs_freset = 1; + + list_for_each_entry(aac, &aac_devices, entry) { + if (aac->id > unique_id) + break; + insert = &aac->entry; + unique_id++; + } + + pci_disable_link_state(pdev, PCIE_LINK_STATE_L0S | PCIE_LINK_STATE_L1 | + PCIE_LINK_STATE_CLKPM); + + error = pci_enable_device(pdev); + if (error) + goto out; + + if (!(aac_drivers[index].quirks & AAC_QUIRK_SRC)) { + error = dma_set_mask(&pdev->dev, DMA_BIT_MASK(32)); + if (error) { + dev_err(&pdev->dev, "PCI 32 BIT dma mask set failed"); + goto out_disable_pdev; + } + } + + /* + * If the quirk31 bit is set, the adapter needs adapter + * to driver communication memory to be allocated below 2gig + */ + if (aac_drivers[index].quirks & AAC_QUIRK_31BIT) { + dmamask = DMA_BIT_MASK(31); + mask_bits = 31; + } else { + dmamask = DMA_BIT_MASK(32); + mask_bits = 32; + } + + error = dma_set_coherent_mask(&pdev->dev, dmamask); + if (error) { + dev_err(&pdev->dev, "PCI %d B consistent dma mask set failed\n" + , mask_bits); + goto out_disable_pdev; + } + + pci_set_master(pdev); + + shost = scsi_host_alloc(&aac_driver_template, sizeof(struct aac_dev)); + if (!shost) { + error = -ENOMEM; + goto out_disable_pdev; + } + + shost->irq = pdev->irq; + shost->unique_id = unique_id; + shost->max_cmd_len = 16; + + if (aac_cfg_major == AAC_CHARDEV_NEEDS_REINIT) + aac_init_char(); + + aac = (struct aac_dev *)shost->hostdata; + aac->base_start = pci_resource_start(pdev, 0); + aac->scsi_host_ptr = shost; + aac->pdev = pdev; + aac->name = aac_driver_template.name; + aac->id = shost->unique_id; + aac->cardtype = index; + INIT_LIST_HEAD(&aac->entry); + + if (aac_reset_devices || reset_devices) + aac->init_reset = true; + + aac->fibs = kcalloc(shost->can_queue + AAC_NUM_MGT_FIB, + sizeof(struct fib), + GFP_KERNEL); + if (!aac->fibs) { + error = -ENOMEM; + goto out_free_host; + } + + spin_lock_init(&aac->fib_lock); + + mutex_init(&aac->ioctl_mutex); + mutex_init(&aac->scan_mutex); + + INIT_DELAYED_WORK(&aac->safw_rescan_work, aac_safw_rescan_worker); + INIT_DELAYED_WORK(&aac->src_reinit_aif_worker, + aac_src_reinit_aif_worker); + /* + * Map in the registers from the adapter. + */ + aac->base_size = AAC_MIN_FOOTPRINT_SIZE; + if ((*aac_drivers[index].init)(aac)) { + error = -ENODEV; + goto out_unmap; + } + + if (aac->sync_mode) { + if (aac_sync_mode) + printk(KERN_INFO "%s%d: Sync. mode enforced " + "by driver parameter. This will cause " + "a significant performance decrease!\n", + aac->name, + aac->id); + else + printk(KERN_INFO "%s%d: Async. mode not supported " + "by current driver, sync. mode enforced." + "\nPlease update driver to get full performance.\n", + aac->name, + aac->id); + } + + /* + * Start any kernel threads needed + */ + aac->thread = kthread_run(aac_command_thread, aac, AAC_DRIVERNAME); + if (IS_ERR(aac->thread)) { + printk(KERN_ERR "aacraid: Unable to create command thread.\n"); + error = PTR_ERR(aac->thread); + aac->thread = NULL; + goto out_deinit; + } + + aac->maximum_num_channels = aac_drivers[index].channels; + error = aac_get_adapter_info(aac); + if (error < 0) + goto out_deinit; + + /* + * Lets override negotiations and drop the maximum SG limit to 34 + */ + if ((aac_drivers[index].quirks & AAC_QUIRK_34SG) && + (shost->sg_tablesize > 34)) { + shost->sg_tablesize = 34; + shost->max_sectors = (shost->sg_tablesize * 8) + 112; + } + + if ((aac_drivers[index].quirks & AAC_QUIRK_17SG) && + (shost->sg_tablesize > 17)) { + shost->sg_tablesize = 17; + shost->max_sectors = (shost->sg_tablesize * 8) + 112; + } + + if (aac->adapter_info.options & AAC_OPT_NEW_COMM) + shost->max_segment_size = shost->max_sectors << 9; + else + shost->max_segment_size = 65536; + + /* + * Firmware printf works only with older firmware. + */ + if (aac_drivers[index].quirks & AAC_QUIRK_34SG) + aac->printf_enabled = 1; + else + aac->printf_enabled = 0; + + /* + * max channel will be the physical channels plus 1 virtual channel + * all containers are on the virtual channel 0 (CONTAINER_CHANNEL) + * physical channels are address by their actual physical number+1 + */ + if (aac->nondasd_support || expose_physicals || aac->jbod) + shost->max_channel = aac->maximum_num_channels; + else + shost->max_channel = 0; + + aac_get_config_status(aac, 0); + aac_get_containers(aac); + list_add(&aac->entry, insert); + + shost->max_id = aac->maximum_num_containers; + if (shost->max_id < aac->maximum_num_physicals) + shost->max_id = aac->maximum_num_physicals; + if (shost->max_id < MAXIMUM_NUM_CONTAINERS) + shost->max_id = MAXIMUM_NUM_CONTAINERS; + else + shost->this_id = shost->max_id; + + if (!aac->sa_firmware && aac_drivers[index].quirks & AAC_QUIRK_SRC) + aac_intr_normal(aac, 0, 2, 0, NULL); + + /* + * dmb - we may need to move the setting of these parms somewhere else once + * we get a fib that can report the actual numbers + */ + shost->max_lun = AAC_MAX_LUN; + + pci_set_drvdata(pdev, shost); + + error = scsi_add_host(shost, &pdev->dev); + if (error) + goto out_deinit; + + aac_scan_host(aac); + + pci_enable_pcie_error_reporting(pdev); + pci_save_state(pdev); + + return 0; + + out_deinit: + __aac_shutdown(aac); + out_unmap: + aac_fib_map_free(aac); + if (aac->comm_addr) + dma_free_coherent(&aac->pdev->dev, aac->comm_size, + aac->comm_addr, aac->comm_phys); + kfree(aac->queues); + aac_adapter_ioremap(aac, 0); + kfree(aac->fibs); + kfree(aac->fsa_dev); + out_free_host: + scsi_host_put(shost); + out_disable_pdev: + pci_disable_device(pdev); + out: + return error; +} + +static void aac_release_resources(struct aac_dev *aac) +{ + aac_adapter_disable_int(aac); + aac_free_irq(aac); +} + +static int aac_acquire_resources(struct aac_dev *dev) +{ + unsigned long status; + /* + * First clear out all interrupts. Then enable the one's that we + * can handle. + */ + while (!((status = src_readl(dev, MUnit.OMR)) & KERNEL_UP_AND_RUNNING) + || status == 0xffffffff) + msleep(20); + + aac_adapter_disable_int(dev); + aac_adapter_enable_int(dev); + + + if (aac_is_src(dev)) + aac_define_int_mode(dev); + + if (dev->msi_enabled) + aac_src_access_devreg(dev, AAC_ENABLE_MSIX); + + if (aac_acquire_irq(dev)) + goto error_iounmap; + + aac_adapter_enable_int(dev); + + /*max msix may change after EEH + * Re-assign vectors to fibs + */ + aac_fib_vector_assign(dev); + + if (!dev->sync_mode) { + /* After EEH recovery or suspend resume, max_msix count + * may change, therefore updating in init as well. + */ + dev->init->r7.no_of_msix_vectors = cpu_to_le32(dev->max_msix); + aac_adapter_start(dev); + } + return 0; + +error_iounmap: + return -1; + +} + +#if (defined(CONFIG_PM)) +static int aac_suspend(struct pci_dev *pdev, pm_message_t state) +{ + + struct Scsi_Host *shost = pci_get_drvdata(pdev); + struct aac_dev *aac = (struct aac_dev *)shost->hostdata; + + scsi_host_block(shost); + aac_cancel_rescan_worker(aac); + aac_send_shutdown(aac); + + aac_release_resources(aac); + + pci_set_drvdata(pdev, shost); + pci_save_state(pdev); + pci_disable_device(pdev); + pci_set_power_state(pdev, pci_choose_state(pdev, state)); + + return 0; +} + +static int aac_resume(struct pci_dev *pdev) +{ + struct Scsi_Host *shost = pci_get_drvdata(pdev); + struct aac_dev *aac = (struct aac_dev *)shost->hostdata; + int r; + + pci_set_power_state(pdev, PCI_D0); + pci_enable_wake(pdev, PCI_D0, 0); + pci_restore_state(pdev); + r = pci_enable_device(pdev); + + if (r) + goto fail_device; + + pci_set_master(pdev); + if (aac_acquire_resources(aac)) + goto fail_device; + /* + * reset this flag to unblock ioctl() as it was set at + * aac_send_shutdown() to block ioctls from upperlayer + */ + aac->adapter_shutdown = 0; + scsi_host_unblock(shost, SDEV_RUNNING); + + return 0; + +fail_device: + printk(KERN_INFO "%s%d: resume failed.\n", aac->name, aac->id); + scsi_host_put(shost); + pci_disable_device(pdev); + return -ENODEV; +} +#endif + +static void aac_shutdown(struct pci_dev *dev) +{ + struct Scsi_Host *shost = pci_get_drvdata(dev); + + scsi_host_block(shost); + __aac_shutdown((struct aac_dev *)shost->hostdata); +} + +static void aac_remove_one(struct pci_dev *pdev) +{ + struct Scsi_Host *shost = pci_get_drvdata(pdev); + struct aac_dev *aac = (struct aac_dev *)shost->hostdata; + + aac_cancel_rescan_worker(aac); + scsi_remove_host(shost); + + __aac_shutdown(aac); + aac_fib_map_free(aac); + dma_free_coherent(&aac->pdev->dev, aac->comm_size, aac->comm_addr, + aac->comm_phys); + kfree(aac->queues); + + aac_adapter_ioremap(aac, 0); + + kfree(aac->fibs); + kfree(aac->fsa_dev); + + list_del(&aac->entry); + scsi_host_put(shost); + pci_disable_device(pdev); + if (list_empty(&aac_devices)) { + unregister_chrdev(aac_cfg_major, "aac"); + aac_cfg_major = AAC_CHARDEV_NEEDS_REINIT; + } +} + +static pci_ers_result_t aac_pci_error_detected(struct pci_dev *pdev, + pci_channel_state_t error) +{ + struct Scsi_Host *shost = pci_get_drvdata(pdev); + struct aac_dev *aac = shost_priv(shost); + + dev_err(&pdev->dev, "aacraid: PCI error detected %x\n", error); + + switch (error) { + case pci_channel_io_normal: + return PCI_ERS_RESULT_CAN_RECOVER; + case pci_channel_io_frozen: + aac->handle_pci_error = 1; + + scsi_host_block(shost); + aac_cancel_rescan_worker(aac); + scsi_host_complete_all_commands(shost, DID_NO_CONNECT); + aac_release_resources(aac); + + pci_disable_pcie_error_reporting(pdev); + aac_adapter_ioremap(aac, 0); + + return PCI_ERS_RESULT_NEED_RESET; + case pci_channel_io_perm_failure: + aac->handle_pci_error = 1; + + scsi_host_complete_all_commands(shost, DID_NO_CONNECT); + return PCI_ERS_RESULT_DISCONNECT; + } + + return PCI_ERS_RESULT_NEED_RESET; +} + +static pci_ers_result_t aac_pci_mmio_enabled(struct pci_dev *pdev) +{ + dev_err(&pdev->dev, "aacraid: PCI error - mmio enabled\n"); + return PCI_ERS_RESULT_NEED_RESET; +} + +static pci_ers_result_t aac_pci_slot_reset(struct pci_dev *pdev) +{ + dev_err(&pdev->dev, "aacraid: PCI error - slot reset\n"); + pci_restore_state(pdev); + if (pci_enable_device(pdev)) { + dev_warn(&pdev->dev, + "aacraid: failed to enable slave\n"); + goto fail_device; + } + + pci_set_master(pdev); + + if (pci_enable_device_mem(pdev)) { + dev_err(&pdev->dev, "pci_enable_device_mem failed\n"); + goto fail_device; + } + + return PCI_ERS_RESULT_RECOVERED; + +fail_device: + dev_err(&pdev->dev, "aacraid: PCI error - slot reset failed\n"); + return PCI_ERS_RESULT_DISCONNECT; +} + + +static void aac_pci_resume(struct pci_dev *pdev) +{ + struct Scsi_Host *shost = pci_get_drvdata(pdev); + struct aac_dev *aac = (struct aac_dev *)shost_priv(shost); + + if (aac_adapter_ioremap(aac, aac->base_size)) { + + dev_err(&pdev->dev, "aacraid: ioremap failed\n"); + /* remap failed, go back ... */ + aac->comm_interface = AAC_COMM_PRODUCER; + if (aac_adapter_ioremap(aac, AAC_MIN_FOOTPRINT_SIZE)) { + dev_warn(&pdev->dev, + "aacraid: unable to map adapter.\n"); + + return; + } + } + + msleep(10000); + + aac_acquire_resources(aac); + + /* + * reset this flag to unblock ioctl() as it was set + * at aac_send_shutdown() to block ioctls from upperlayer + */ + aac->adapter_shutdown = 0; + aac->handle_pci_error = 0; + + scsi_host_unblock(shost, SDEV_RUNNING); + aac_scan_host(aac); + pci_save_state(pdev); + + dev_err(&pdev->dev, "aacraid: PCI error - resume\n"); +} + +static struct pci_error_handlers aac_pci_err_handler = { + .error_detected = aac_pci_error_detected, + .mmio_enabled = aac_pci_mmio_enabled, + .slot_reset = aac_pci_slot_reset, + .resume = aac_pci_resume, +}; + +static struct pci_driver aac_pci_driver = { + .name = AAC_DRIVERNAME, + .id_table = aac_pci_tbl, + .probe = aac_probe_one, + .remove = aac_remove_one, +#if (defined(CONFIG_PM)) + .suspend = aac_suspend, + .resume = aac_resume, +#endif + .shutdown = aac_shutdown, + .err_handler = &aac_pci_err_handler, +}; + +static int __init aac_init(void) +{ + int error; + + printk(KERN_INFO "Adaptec %s driver %s\n", + AAC_DRIVERNAME, aac_driver_version); + + error = pci_register_driver(&aac_pci_driver); + if (error < 0) + return error; + + aac_init_char(); + + + return 0; +} + +static void __exit aac_exit(void) +{ + if (aac_cfg_major > -1) + unregister_chrdev(aac_cfg_major, "aac"); + pci_unregister_driver(&aac_pci_driver); +} + +module_init(aac_init); +module_exit(aac_exit); |