diff options
Diffstat (limited to 'drivers/scsi/nsp32.h')
| -rw-r--r-- | drivers/scsi/nsp32.h | 608 |
1 files changed, 608 insertions, 0 deletions
diff --git a/drivers/scsi/nsp32.h b/drivers/scsi/nsp32.h new file mode 100644 index 000000000..ab0726c07 --- /dev/null +++ b/drivers/scsi/nsp32.h @@ -0,0 +1,608 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * Workbit NinjaSCSI-32Bi/UDE PCI/CardBus SCSI Host Bus Adapter driver + * Basic data header +*/ + +#ifndef _NSP32_H +#define _NSP32_H + +//#define NSP32_DEBUG 9 + +/* + * VENDOR/DEVICE ID + */ +#define PCI_VENDOR_ID_IODATA 0x10fc +#define PCI_VENDOR_ID_WORKBIT 0x1145 + +#define PCI_DEVICE_ID_NINJASCSI_32BI_CBSC_II 0x0005 +#define PCI_DEVICE_ID_NINJASCSI_32BI_KME 0xf007 +#define PCI_DEVICE_ID_NINJASCSI_32BI_WBT 0x8007 +#define PCI_DEVICE_ID_WORKBIT_STANDARD 0xf010 +#define PCI_DEVICE_ID_WORKBIT_DUALEDGE 0xf011 +#define PCI_DEVICE_ID_NINJASCSI_32BI_LOGITEC 0xf012 +#define PCI_DEVICE_ID_NINJASCSI_32BIB_LOGITEC 0xf013 +#define PCI_DEVICE_ID_NINJASCSI_32UDE_MELCO 0xf015 +#define PCI_DEVICE_ID_NINJASCSI_32UDE_MELCO_II 0x8009 + +/* + * MODEL + */ +enum { + MODEL_IODATA = 0, + MODEL_KME = 1, + MODEL_WORKBIT = 2, + MODEL_LOGITEC = 3, + MODEL_PCI_WORKBIT = 4, + MODEL_PCI_LOGITEC = 5, + MODEL_PCI_MELCO = 6, +}; + +static char * nsp32_model[] = { + "I-O DATA CBSC-II CardBus card", + "KME SCSI CardBus card", + "Workbit duo SCSI CardBus card", + "Logitec CardBus card with external ROM", + "Workbit / I-O DATA PCI card", + "Logitec PCI card with external ROM", + "Melco CardBus/PCI card with external ROM", +}; + + +/* + * SCSI Generic Definitions + */ +#define EXTENDED_SDTR_LEN 0x03 + +/* Little Endian */ +typedef u32 u32_le; +typedef u16 u16_le; + +/* + * BASIC Definitions + */ +#ifndef TRUE +# define TRUE 1 +#endif +#ifndef FALSE +# define FALSE 0 +#endif +#define ASSERT 1 +#define NEGATE 0 + + +/*******************/ +/* normal register */ +/*******************/ +/* + * Don't access below register with Double Word: + * +00, +04, +08, +0c, +64, +80, +84, +88, +90, +c4, +c8, +cc, +d0. + */ +#define IRQ_CONTROL 0x00 /* BASE+00, W, W */ +#define IRQ_STATUS 0x00 /* BASE+00, W, R */ +# define IRQSTATUS_LATCHED_MSG BIT(0) +# define IRQSTATUS_LATCHED_IO BIT(1) +# define IRQSTATUS_LATCHED_CD BIT(2) +# define IRQSTATUS_LATCHED_BUS_FREE BIT(3) +# define IRQSTATUS_RESELECT_OCCUER BIT(4) +# define IRQSTATUS_PHASE_CHANGE_IRQ BIT(5) +# define IRQSTATUS_SCSIRESET_IRQ BIT(6) +# define IRQSTATUS_TIMER_IRQ BIT(7) +# define IRQSTATUS_FIFO_SHLD_IRQ BIT(8) +# define IRQSTATUS_PCI_IRQ BIT(9) +# define IRQSTATUS_BMCNTERR_IRQ BIT(10) +# define IRQSTATUS_AUTOSCSI_IRQ BIT(11) +# define PCI_IRQ_MASK BIT(12) +# define TIMER_IRQ_MASK BIT(13) +# define FIFO_IRQ_MASK BIT(14) +# define SCSI_IRQ_MASK BIT(15) +# define IRQ_CONTROL_ALL_IRQ_MASK (PCI_IRQ_MASK | \ + TIMER_IRQ_MASK | \ + FIFO_IRQ_MASK | \ + SCSI_IRQ_MASK ) +# define IRQSTATUS_ANY_IRQ (IRQSTATUS_RESELECT_OCCUER | \ + IRQSTATUS_PHASE_CHANGE_IRQ | \ + IRQSTATUS_SCSIRESET_IRQ | \ + IRQSTATUS_TIMER_IRQ | \ + IRQSTATUS_FIFO_SHLD_IRQ | \ + IRQSTATUS_PCI_IRQ | \ + IRQSTATUS_BMCNTERR_IRQ | \ + IRQSTATUS_AUTOSCSI_IRQ ) + +#define TRANSFER_CONTROL 0x02 /* BASE+02, W, W */ +#define TRANSFER_STATUS 0x02 /* BASE+02, W, R */ +# define CB_MMIO_MODE BIT(0) +# define CB_IO_MODE BIT(1) +# define BM_TEST BIT(2) +# define BM_TEST_DIR BIT(3) +# define DUAL_EDGE_ENABLE BIT(4) +# define NO_TRANSFER_TO_HOST BIT(5) +# define TRANSFER_GO BIT(7) +# define BLIEND_MODE BIT(8) +# define BM_START BIT(9) +# define ADVANCED_BM_WRITE BIT(10) +# define BM_SINGLE_MODE BIT(11) +# define FIFO_TRUE_FULL BIT(12) +# define FIFO_TRUE_EMPTY BIT(13) +# define ALL_COUNTER_CLR BIT(14) +# define FIFOTEST BIT(15) + +#define INDEX_REG 0x04 /* BASE+04, Byte(R/W), Word(R) */ + +#define TIMER_SET 0x06 /* BASE+06, W, R/W */ +# define TIMER_CNT_MASK (0xff) +# define TIMER_STOP BIT(8) + +#define DATA_REG_LOW 0x08 /* BASE+08, LowW, R/W */ +#define DATA_REG_HI 0x0a /* BASE+0a, Hi-W, R/W */ + +#define FIFO_REST_CNT 0x0c /* BASE+0c, W, R/W */ +# define FIFO_REST_MASK 0x1ff +# define FIFO_EMPTY_SHLD_FLAG BIT(14) +# define FIFO_FULL_SHLD_FLAG BIT(15) + +#define SREQ_SMPL_RATE 0x0f /* BASE+0f, B, R/W */ +# define SREQSMPLRATE_RATE0 BIT(0) +# define SREQSMPLRATE_RATE1 BIT(1) +# define SAMPLING_ENABLE BIT(2) +# define SMPL_40M (0) /* 40MHz: 0-100ns/period */ +# define SMPL_20M (SREQSMPLRATE_RATE0) /* 20MHz: 100-200ns/period */ +# define SMPL_10M (SREQSMPLRATE_RATE1) /* 10Mhz: 200- ns/period */ + +#define SCSI_BUS_CONTROL 0x10 /* BASE+10, B, R/W */ +# define BUSCTL_SEL BIT(0) +# define BUSCTL_RST BIT(1) +# define BUSCTL_DATAOUT_ENB BIT(2) +# define BUSCTL_ATN BIT(3) +# define BUSCTL_ACK BIT(4) +# define BUSCTL_BSY BIT(5) +# define AUTODIRECTION BIT(6) +# define ACKENB BIT(7) + +#define CLR_COUNTER 0x12 /* BASE+12, B, W */ +# define ACK_COUNTER_CLR BIT(0) +# define SREQ_COUNTER_CLR BIT(1) +# define FIFO_HOST_POINTER_CLR BIT(2) +# define FIFO_REST_COUNT_CLR BIT(3) +# define BM_COUNTER_CLR BIT(4) +# define SAVED_ACK_CLR BIT(5) +# define CLRCOUNTER_ALLMASK (ACK_COUNTER_CLR | \ + SREQ_COUNTER_CLR | \ + FIFO_HOST_POINTER_CLR | \ + FIFO_REST_COUNT_CLR | \ + BM_COUNTER_CLR | \ + SAVED_ACK_CLR ) + +#define SCSI_BUS_MONITOR 0x12 /* BASE+12, B, R */ +# define BUSMON_MSG BIT(0) +# define BUSMON_IO BIT(1) +# define BUSMON_CD BIT(2) +# define BUSMON_BSY BIT(3) +# define BUSMON_ACK BIT(4) +# define BUSMON_REQ BIT(5) +# define BUSMON_SEL BIT(6) +# define BUSMON_ATN BIT(7) + +#define COMMAND_DATA 0x14 /* BASE+14, B, R/W */ + +#define PARITY_CONTROL 0x16 /* BASE+16, B, W */ +# define PARITY_CHECK_ENABLE BIT(0) +# define PARITY_ERROR_CLEAR BIT(1) +#define PARITY_STATUS 0x16 /* BASE+16, B, R */ +//# define PARITY_CHECK_ENABLE BIT(0) +# define PARITY_ERROR_NORMAL BIT(1) +# define PARITY_ERROR_LSB BIT(1) +# define PARITY_ERROR_MSB BIT(2) + +#define RESELECT_ID 0x18 /* BASE+18, B, R */ + +#define COMMAND_CONTROL 0x18 /* BASE+18, W, W */ +# define CLEAR_CDB_FIFO_POINTER BIT(0) +# define AUTO_COMMAND_PHASE BIT(1) +# define AUTOSCSI_START BIT(2) +# define AUTOSCSI_RESTART BIT(3) +# define AUTO_PARAMETER BIT(4) +# define AUTO_ATN BIT(5) +# define AUTO_MSGIN_00_OR_04 BIT(6) +# define AUTO_MSGIN_02 BIT(7) +# define AUTO_MSGIN_03 BIT(8) + +#define SET_ARBIT 0x1a /* BASE+1a, B, W */ +# define ARBIT_GO BIT(0) +# define ARBIT_CLEAR BIT(1) + +#define ARBIT_STATUS 0x1a /* BASE+1a, B, R */ +//# define ARBIT_GO BIT(0) +# define ARBIT_WIN BIT(1) +# define ARBIT_FAIL BIT(2) +# define AUTO_PARAMETER_VALID BIT(3) +# define SGT_VALID BIT(4) + +#define SYNC_REG 0x1c /* BASE+1c, B, R/W */ + +#define ACK_WIDTH 0x1d /* BASE+1d, B, R/W */ + +#define SCSI_DATA_WITH_ACK 0x20 /* BASE+20, B, R/W */ +#define SCSI_OUT_LATCH_TARGET_ID 0x22 /* BASE+22, B, W */ +#define SCSI_DATA_IN 0x22 /* BASE+22, B, R */ + +#define SCAM_CONTROL 0x24 /* BASE+24, B, W */ +#define SCAM_STATUS 0x24 /* BASE+24, B, R */ +# define SCAM_MSG BIT(0) +# define SCAM_IO BIT(1) +# define SCAM_CD BIT(2) +# define SCAM_BSY BIT(3) +# define SCAM_SEL BIT(4) +# define SCAM_XFEROK BIT(5) + +#define SCAM_DATA 0x26 /* BASE+26, B, R/W */ +# define SD0 BIT(0) +# define SD1 BIT(1) +# define SD2 BIT(2) +# define SD3 BIT(3) +# define SD4 BIT(4) +# define SD5 BIT(5) +# define SD6 BIT(6) +# define SD7 BIT(7) + +#define SACK_CNT 0x28 /* BASE+28, DW, R/W */ +#define SREQ_CNT 0x2c /* BASE+2c, DW, R/W */ + +#define FIFO_DATA_LOW 0x30 /* BASE+30, B/W/DW, R/W */ +#define FIFO_DATA_HIGH 0x32 /* BASE+32, B/W, R/W */ +#define BM_START_ADR 0x34 /* BASE+34, DW, R/W */ + +#define BM_CNT 0x38 /* BASE+38, DW, R/W */ +# define BM_COUNT_MASK 0x0001ffffUL +# define SGTEND BIT(31) /* Last SGT marker */ + +#define SGT_ADR 0x3c /* BASE+3c, DW, R/W */ +#define WAIT_REG 0x40 /* Bi only */ + +#define SCSI_EXECUTE_PHASE 0x40 /* BASE+40, W, R */ +# define COMMAND_PHASE BIT(0) +# define DATA_IN_PHASE BIT(1) +# define DATA_OUT_PHASE BIT(2) +# define MSGOUT_PHASE BIT(3) +# define STATUS_PHASE BIT(4) +# define ILLEGAL_PHASE BIT(5) +# define BUS_FREE_OCCUER BIT(6) +# define MSG_IN_OCCUER BIT(7) +# define MSG_OUT_OCCUER BIT(8) +# define SELECTION_TIMEOUT BIT(9) +# define MSGIN_00_VALID BIT(10) +# define MSGIN_02_VALID BIT(11) +# define MSGIN_03_VALID BIT(12) +# define MSGIN_04_VALID BIT(13) +# define AUTOSCSI_BUSY BIT(15) + +#define SCSI_CSB_IN 0x42 /* BASE+42, B, R */ + +#define SCSI_MSG_OUT 0x44 /* BASE+44, DW, R/W */ +# define MSGOUT_COUNT_MASK (BIT(0)|BIT(1)) +# define MV_VALID BIT(7) + +#define SEL_TIME_OUT 0x48 /* BASE+48, W, R/W */ +#define SAVED_SACK_CNT 0x4c /* BASE+4c, DW, R */ + +#define HTOSDATADELAY 0x50 /* BASE+50, B, R/W */ +#define STOHDATADELAY 0x54 /* BASE+54, B, R/W */ +#define ACKSUMCHECKRD 0x58 /* BASE+58, W, R */ +#define REQSUMCHECKRD 0x5c /* BASE+5c, W, R */ + + +/********************/ +/* indexed register */ +/********************/ + +#define CLOCK_DIV 0x00 /* BASE+08, IDX+00, B, R/W */ +# define CLOCK_2 BIT(0) /* MCLK/2 */ +# define CLOCK_4 BIT(1) /* MCLK/4 */ +# define PCICLK BIT(7) /* PCICLK (33MHz) */ + +#define TERM_PWR_CONTROL 0x01 /* BASE+08, IDX+01, B, R/W */ +# define BPWR BIT(0) +# define SENSE BIT(1) /* Read Only */ + +#define EXT_PORT_DDR 0x02 /* BASE+08, IDX+02, B, R/W */ +#define EXT_PORT 0x03 /* BASE+08, IDX+03, B, R/W */ +# define LED_ON (0) +# define LED_OFF BIT(0) + +#define IRQ_SELECT 0x04 /* BASE+08, IDX+04, W, R/W */ +# define IRQSELECT_RESELECT_IRQ BIT(0) +# define IRQSELECT_PHASE_CHANGE_IRQ BIT(1) +# define IRQSELECT_SCSIRESET_IRQ BIT(2) +# define IRQSELECT_TIMER_IRQ BIT(3) +# define IRQSELECT_FIFO_SHLD_IRQ BIT(4) +# define IRQSELECT_TARGET_ABORT_IRQ BIT(5) +# define IRQSELECT_MASTER_ABORT_IRQ BIT(6) +# define IRQSELECT_SERR_IRQ BIT(7) +# define IRQSELECT_PERR_IRQ BIT(8) +# define IRQSELECT_BMCNTERR_IRQ BIT(9) +# define IRQSELECT_AUTO_SCSI_SEQ_IRQ BIT(10) + +#define OLD_SCSI_PHASE 0x05 /* BASE+08, IDX+05, B, R */ +# define OLD_MSG BIT(0) +# define OLD_IO BIT(1) +# define OLD_CD BIT(2) +# define OLD_BUSY BIT(3) + +#define FIFO_FULL_SHLD_COUNT 0x06 /* BASE+08, IDX+06, B, R/W */ +#define FIFO_EMPTY_SHLD_COUNT 0x07 /* BASE+08, IDX+07, B, R/W */ + +#define EXP_ROM_CONTROL 0x08 /* BASE+08, IDX+08, B, R/W */ /* external ROM control */ +# define ROM_WRITE_ENB BIT(0) +# define IO_ACCESS_ENB BIT(1) +# define ROM_ADR_CLEAR BIT(2) + +#define EXP_ROM_ADR 0x09 /* BASE+08, IDX+09, W, R/W */ + +#define EXP_ROM_DATA 0x0a /* BASE+08, IDX+0a, B, R/W */ + +#define CHIP_MODE 0x0b /* BASE+08, IDX+0b, B, R */ /* NinjaSCSI-32Bi only */ +# define OEM0 BIT(1) /* OEM select */ /* 00=I-O DATA, 01=KME, 10=Workbit, 11=Ext ROM */ +# define OEM1 BIT(2) /* OEM select */ +# define OPTB BIT(3) /* KME mode select */ +# define OPTC BIT(4) /* KME mode select */ +# define OPTD BIT(5) /* KME mode select */ +# define OPTE BIT(6) /* KME mode select */ +# define OPTF BIT(7) /* Power management */ + +#define MISC_WR 0x0c /* BASE+08, IDX+0c, W, R/W */ +#define MISC_RD 0x0c +# define SCSI_DIRECTION_DETECTOR_SELECT BIT(0) +# define SCSI2_HOST_DIRECTION_VALID BIT(1) /* Read only */ +# define HOST2_SCSI_DIRECTION_VALID BIT(2) /* Read only */ +# define DELAYED_BMSTART BIT(3) +# define MASTER_TERMINATION_SELECT BIT(4) +# define BMREQ_NEGATE_TIMING_SEL BIT(5) +# define AUTOSEL_TIMING_SEL BIT(6) +# define MISC_MABORT_MASK BIT(7) +# define BMSTOP_CHANGE2_NONDATA_PHASE BIT(8) + +#define BM_CYCLE 0x0d /* BASE+08, IDX+0d, B, R/W */ +# define BM_CYCLE0 BIT(0) +# define BM_CYCLE1 BIT(1) +# define BM_FRAME_ASSERT_TIMING BIT(2) +# define BM_IRDY_ASSERT_TIMING BIT(3) +# define BM_SINGLE_BUS_MASTER BIT(4) +# define MEMRD_CMD0 BIT(5) +# define SGT_AUTO_PARA_MEMED_CMD BIT(6) +# define MEMRD_CMD1 BIT(7) + + +#define SREQ_EDGH 0x0e /* BASE+08, IDX+0e, B, W */ +# define SREQ_EDGH_SELECT BIT(0) + +#define UP_CNT 0x0f /* BASE+08, IDX+0f, B, W */ +# define REQCNT_UP BIT(0) +# define ACKCNT_UP BIT(1) +# define BMADR_UP BIT(4) +# define BMCNT_UP BIT(5) +# define SGT_CNT_UP BIT(7) + +#define CFG_CMD_STR 0x10 /* BASE+08, IDX+10, W, R */ +#define CFG_LATE_CACHE 0x11 /* BASE+08, IDX+11, W, R/W */ +#define CFG_BASE_ADR_1 0x12 /* BASE+08, IDX+12, W, R */ +#define CFG_BASE_ADR_2 0x13 /* BASE+08, IDX+13, W, R */ +#define CFG_INLINE 0x14 /* BASE+08, IDX+14, W, R */ + +#define SERIAL_ROM_CTL 0x15 /* BASE+08, IDX+15, B, R */ +# define SCL BIT(0) +# define ENA BIT(1) +# define SDA BIT(2) + +#define FIFO_HST_POINTER 0x16 /* BASE+08, IDX+16, B, R/W */ +#define SREQ_DELAY 0x17 /* BASE+08, IDX+17, B, R/W */ +#define SACK_DELAY 0x18 /* BASE+08, IDX+18, B, R/W */ +#define SREQ_NOISE_CANCEL 0x19 /* BASE+08, IDX+19, B, R/W */ +#define SDP_NOISE_CANCEL 0x1a /* BASE+08, IDX+1a, B, R/W */ +#define DELAY_TEST 0x1b /* BASE+08, IDX+1b, B, R/W */ +#define SD0_NOISE_CANCEL 0x20 /* BASE+08, IDX+20, B, R/W */ +#define SD1_NOISE_CANCEL 0x21 /* BASE+08, IDX+21, B, R/W */ +#define SD2_NOISE_CANCEL 0x22 /* BASE+08, IDX+22, B, R/W */ +#define SD3_NOISE_CANCEL 0x23 /* BASE+08, IDX+23, B, R/W */ +#define SD4_NOISE_CANCEL 0x24 /* BASE+08, IDX+24, B, R/W */ +#define SD5_NOISE_CANCEL 0x25 /* BASE+08, IDX+25, B, R/W */ +#define SD6_NOISE_CANCEL 0x26 /* BASE+08, IDX+26, B, R/W */ +#define SD7_NOISE_CANCEL 0x27 /* BASE+08, IDX+27, B, R/W */ + + +/* + * Useful Bus Monitor status combinations. + */ +#define BUSMON_BUS_FREE 0 +#define BUSMON_COMMAND ( BUSMON_BSY | BUSMON_CD | BUSMON_REQ ) +#define BUSMON_MESSAGE_IN ( BUSMON_BSY | BUSMON_MSG | BUSMON_IO | BUSMON_CD | BUSMON_REQ ) +#define BUSMON_MESSAGE_OUT ( BUSMON_BSY | BUSMON_MSG | BUSMON_CD | BUSMON_REQ ) +#define BUSMON_DATA_IN ( BUSMON_BSY | BUSMON_IO | BUSMON_REQ ) +#define BUSMON_DATA_OUT ( BUSMON_BSY | BUSMON_REQ ) +#define BUSMON_STATUS ( BUSMON_BSY | BUSMON_IO | BUSMON_CD | BUSMON_REQ ) +#define BUSMON_RESELECT ( BUSMON_IO | BUSMON_SEL) +#define BUSMON_PHASE_MASK ( BUSMON_MSG | BUSMON_IO | BUSMON_CD | BUSMON_SEL) + +#define BUSPHASE_COMMAND ( BUSMON_COMMAND & BUSMON_PHASE_MASK ) +#define BUSPHASE_MESSAGE_IN ( BUSMON_MESSAGE_IN & BUSMON_PHASE_MASK ) +#define BUSPHASE_MESSAGE_OUT ( BUSMON_MESSAGE_OUT & BUSMON_PHASE_MASK ) +#define BUSPHASE_DATA_IN ( BUSMON_DATA_IN & BUSMON_PHASE_MASK ) +#define BUSPHASE_DATA_OUT ( BUSMON_DATA_OUT & BUSMON_PHASE_MASK ) +#define BUSPHASE_STATUS ( BUSMON_STATUS & BUSMON_PHASE_MASK ) +#define BUSPHASE_SELECT ( BUSMON_SEL | BUSMON_IO ) + + +/************************************************************************ + * structure for DMA/Scatter Gather list + */ +#define NSP32_SG_SIZE SG_ALL + +typedef struct _nsp32_sgtable { + /* values must be little endian */ + u32_le addr; /* transfer address */ + u32_le len; /* transfer length. BIT(31) is for SGT_END mark */ +} __attribute__ ((packed)) nsp32_sgtable; + +typedef struct _nsp32_sglun { + nsp32_sgtable sgt[NSP32_SG_SIZE+1]; /* SG table */ +} __attribute__ ((packed)) nsp32_sglun; +#define NSP32_SG_TABLE_SIZE (sizeof(nsp32_sgtable) * NSP32_SG_SIZE * MAX_TARGET * MAX_LUN) + +/* Auto parameter mode memory map. */ +/* All values must be little endian. */ +typedef struct _nsp32_autoparam { + u8 cdb[4 * 0x10]; /* SCSI Command */ + u32_le msgout; /* outgoing messages */ + u8 syncreg; /* sync register value */ + u8 ackwidth; /* ack width register value */ + u8 target_id; /* target/host device id */ + u8 sample_reg; /* hazard killer sampling rate */ + u16_le command_control; /* command control register */ + u16_le transfer_control; /* transfer control register */ + u32_le sgt_pointer; /* SG table physical address for DMA */ + u32_le dummy[2]; +} __attribute__ ((packed)) nsp32_autoparam; /* must be packed struct */ + +/* + * host data structure + */ +/* message in/out buffer */ +#define MSGOUTBUF_MAX 20 +#define MSGINBUF_MAX 20 + +/* flag for trans_method */ +#define NSP32_TRANSFER_BUSMASTER BIT(0) +#define NSP32_TRANSFER_MMIO BIT(1) /* Not supported yet */ +#define NSP32_TRANSFER_PIO BIT(2) /* Not supported yet */ + + +/* + * structure for connected LUN dynamic data + * + * Note: Currently tagged queuing is disabled, each nsp32_lunt holds + * one SCSI command and one state. + */ +#define DISCPRIV_OK BIT(0) /* DISCPRIV Enable mode */ +#define MSGIN03 BIT(1) /* Auto Msg In 03 Flag */ + +typedef struct _nsp32_lunt { + struct scsi_cmnd *SCpnt; /* Current Handling struct scsi_cmnd */ + unsigned long save_datp; /* Save Data Pointer - saved position from initial address */ + int msgin03; /* auto msg in 03 flag */ + unsigned int sg_num; /* Total number of SG entries */ + int cur_entry; /* Current SG entry number */ + nsp32_sglun *sglun; /* sg table per lun */ + dma_addr_t sglun_paddr; /* sglun physical address */ +} nsp32_lunt; + + +/* + * SCSI TARGET/LUN definition + */ +#define NSP32_HOST_SCSIID 7 /* SCSI initiator is every time defined as 7 */ +#define MAX_TARGET 8 +#define MAX_LUN 8 /* XXX: In SPI3, max number of LUN is 64. */ + + +typedef struct _nsp32_sync_table { + unsigned char period_num; /* period number */ + unsigned char ackwidth; /* ack width designated by period */ + unsigned char start_period; /* search range - start period */ + unsigned char end_period; /* search range - end period */ + unsigned char sample_rate; /* hazard killer parameter */ +} nsp32_sync_table; + + +/* + * structure for target device static data + */ +/* flag for nsp32_target.sync_flag */ +#define SDTR_INITIATOR BIT(0) /* sending SDTR from initiator */ +#define SDTR_TARGET BIT(1) /* sending SDTR from target */ +#define SDTR_DONE BIT(2) /* exchanging SDTR has been processed */ + +/* syncronous period value for nsp32_target.config_max */ +#define FAST5M 0x32 +#define FAST10M 0x19 +#define ULTRA20M 0x0c + +/* flag for nsp32_target.{sync_offset}, period */ +#define ASYNC_OFFSET 0 /* asynchronous transfer */ +#define SYNC_OFFSET 0xf /* synchronous transfer max offset */ + +/* syncreg: + bit:07 06 05 04 03 02 01 00 + ---PERIOD-- ---OFFSET-- */ +#define TO_SYNCREG(period, offset) (((period) & 0x0f) << 4 | ((offset) & 0x0f)) + +typedef struct _nsp32_target { + unsigned char syncreg; /* value for SYNCREG */ + unsigned char ackwidth; /* value for ACKWIDTH */ + unsigned char period; /* sync period (0-255) */ + unsigned char offset; /* sync offset (0-15) */ + int sync_flag; /* SDTR_*, 0 */ + int limit_entry; /* max speed limit entry designated + by EEPROM configuration */ + unsigned char sample_reg; /* SREQ hazard killer register */ +} nsp32_target; + +typedef struct _nsp32_hw_data { + int IrqNumber; + int BaseAddress; + int NumAddress; + void __iomem *MmioAddress; +#define NSP32_MMIO_OFFSET 0x0800 + unsigned long MmioLength; + + struct scsi_cmnd *CurrentSC; + + struct pci_dev *Pci; + const struct pci_device_id *pci_devid; + struct Scsi_Host *Host; + spinlock_t Lock; + + char info_str[100]; + + /* allocated memory region */ + nsp32_sglun *sg_list; /* sglist virtuxal address */ + dma_addr_t sg_paddr; /* physical address of hw_sg_table */ + nsp32_autoparam *autoparam; /* auto parameter transfer region */ + dma_addr_t auto_paddr; /* physical address of autoparam */ + int cur_entry; /* current sgt entry */ + + /* target/LUN */ + nsp32_lunt *cur_lunt; /* Current connected LUN table */ + nsp32_lunt lunt[MAX_TARGET][MAX_LUN]; /* All LUN table */ + + nsp32_target *cur_target; /* Current connected SCSI ID */ + nsp32_target target[MAX_TARGET]; /* SCSI ID */ + int cur_id; /* Current connected target ID */ + int cur_lun; /* Current connected target LUN */ + + /* behavior setting parameters */ + int trans_method; /* transfer method flag */ + int resettime; /* Reset time */ + int clock; /* clock dividing flag */ + nsp32_sync_table *synct; /* sync_table determined by clock */ + int syncnum; /* the max number of synct element */ + + /* message buffer */ + unsigned char msgoutbuf[MSGOUTBUF_MAX]; /* msgout buffer */ + char msgout_len; /* msgoutbuf length */ + unsigned char msginbuf [MSGINBUF_MAX]; /* megin buffer */ + char msgin_len; /* msginbuf length */ + +} nsp32_hw_data; + +/* + * TIME definition + */ +#define RESET_HOLD_TIME 10000 /* reset time in us (SCSI-2 says the + minimum is 25us) */ +#define SEL_TIMEOUT_TIME 10000 /* 250ms defined in SCSI specification + (25.6us/1unit) */ +#define ARBIT_TIMEOUT_TIME 100 /* 100us */ +#define REQSACK_TIMEOUT_TIME 10000 /* max wait time for REQ/SACK assertion + or negation, 10000us == 10ms */ + +#endif /* _NSP32_H */ +/* end */ |