diff options
Diffstat (limited to 'drivers/spi/spi-jcore.c')
| -rw-r--r-- | drivers/spi/spi-jcore.c | 234 |
1 files changed, 234 insertions, 0 deletions
diff --git a/drivers/spi/spi-jcore.c b/drivers/spi/spi-jcore.c new file mode 100644 index 000000000..bba10f030 --- /dev/null +++ b/drivers/spi/spi-jcore.c @@ -0,0 +1,234 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * J-Core SPI controller driver + * + * Copyright (C) 2012-2016 Smart Energy Instruments, Inc. + * + * Current version by Rich Felker + * Based loosely on initial version by Oleksandr G Zhadan + * + */ +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/errno.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/spi/spi.h> +#include <linux/clk.h> +#include <linux/err.h> +#include <linux/io.h> +#include <linux/of.h> +#include <linux/delay.h> + +#define DRV_NAME "jcore_spi" + +#define CTRL_REG 0x0 +#define DATA_REG 0x4 + +#define JCORE_SPI_CTRL_XMIT 0x02 +#define JCORE_SPI_STAT_BUSY 0x02 +#define JCORE_SPI_CTRL_LOOP 0x08 +#define JCORE_SPI_CTRL_CS_BITS 0x15 + +#define JCORE_SPI_WAIT_RDY_MAX_LOOP 2000000 + +struct jcore_spi { + struct spi_master *master; + void __iomem *base; + unsigned int cs_reg; + unsigned int speed_reg; + unsigned int speed_hz; + unsigned int clock_freq; +}; + +static int jcore_spi_wait(void __iomem *ctrl_reg) +{ + unsigned timeout = JCORE_SPI_WAIT_RDY_MAX_LOOP; + + do { + if (!(readl(ctrl_reg) & JCORE_SPI_STAT_BUSY)) + return 0; + cpu_relax(); + } while (--timeout); + + return -EBUSY; +} + +static void jcore_spi_program(struct jcore_spi *hw) +{ + void __iomem *ctrl_reg = hw->base + CTRL_REG; + + if (jcore_spi_wait(ctrl_reg)) + dev_err(hw->master->dev.parent, + "timeout waiting to program ctrl reg.\n"); + + writel(hw->cs_reg | hw->speed_reg, ctrl_reg); +} + +static void jcore_spi_chipsel(struct spi_device *spi, bool value) +{ + struct jcore_spi *hw = spi_master_get_devdata(spi->master); + u32 csbit = 1U << (2 * spi->chip_select); + + dev_dbg(hw->master->dev.parent, "chipselect %d\n", spi->chip_select); + + if (value) + hw->cs_reg |= csbit; + else + hw->cs_reg &= ~csbit; + + jcore_spi_program(hw); +} + +static void jcore_spi_baudrate(struct jcore_spi *hw, int speed) +{ + if (speed == hw->speed_hz) return; + hw->speed_hz = speed; + if (speed >= hw->clock_freq / 2) + hw->speed_reg = 0; + else + hw->speed_reg = ((hw->clock_freq / 2 / speed) - 1) << 27; + jcore_spi_program(hw); + dev_dbg(hw->master->dev.parent, "speed=%d reg=0x%x\n", + speed, hw->speed_reg); +} + +static int jcore_spi_txrx(struct spi_master *master, struct spi_device *spi, + struct spi_transfer *t) +{ + struct jcore_spi *hw = spi_master_get_devdata(master); + + void __iomem *ctrl_reg = hw->base + CTRL_REG; + void __iomem *data_reg = hw->base + DATA_REG; + u32 xmit; + + /* data buffers */ + const unsigned char *tx; + unsigned char *rx; + unsigned int len; + unsigned int count; + + jcore_spi_baudrate(hw, t->speed_hz); + + xmit = hw->cs_reg | hw->speed_reg | JCORE_SPI_CTRL_XMIT; + tx = t->tx_buf; + rx = t->rx_buf; + len = t->len; + + for (count = 0; count < len; count++) { + if (jcore_spi_wait(ctrl_reg)) + break; + + writel(tx ? *tx++ : 0, data_reg); + writel(xmit, ctrl_reg); + + if (jcore_spi_wait(ctrl_reg)) + break; + + if (rx) + *rx++ = readl(data_reg); + } + + spi_finalize_current_transfer(master); + + if (count < len) + return -EREMOTEIO; + + return 0; +} + +static int jcore_spi_probe(struct platform_device *pdev) +{ + struct device_node *node = pdev->dev.of_node; + struct jcore_spi *hw; + struct spi_master *master; + struct resource *res; + u32 clock_freq; + struct clk *clk; + int err = -ENODEV; + + master = spi_alloc_master(&pdev->dev, sizeof(struct jcore_spi)); + if (!master) + return err; + + /* Setup the master state. */ + master->num_chipselect = 3; + master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH; + master->transfer_one = jcore_spi_txrx; + master->set_cs = jcore_spi_chipsel; + master->dev.of_node = node; + master->bus_num = pdev->id; + + hw = spi_master_get_devdata(master); + hw->master = master; + platform_set_drvdata(pdev, hw); + + /* Find and map our resources */ + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) + goto exit_busy; + if (!devm_request_mem_region(&pdev->dev, res->start, + resource_size(res), pdev->name)) + goto exit_busy; + hw->base = devm_ioremap(&pdev->dev, res->start, + resource_size(res)); + if (!hw->base) + goto exit_busy; + + /* + * The SPI clock rate controlled via a configurable clock divider + * which is applied to the reference clock. A 50 MHz reference is + * most suitable for obtaining standard SPI clock rates, but some + * designs may have a different reference clock, and the DT must + * make the driver aware so that it can properly program the + * requested rate. If the clock is omitted, 50 MHz is assumed. + */ + clock_freq = 50000000; + clk = devm_clk_get(&pdev->dev, "ref_clk"); + if (!IS_ERR(clk)) { + if (clk_prepare_enable(clk) == 0) { + clock_freq = clk_get_rate(clk); + clk_disable_unprepare(clk); + } else + dev_warn(&pdev->dev, "could not enable ref_clk\n"); + } + hw->clock_freq = clock_freq; + + /* Initialize all CS bits to high. */ + hw->cs_reg = JCORE_SPI_CTRL_CS_BITS; + jcore_spi_baudrate(hw, 400000); + + /* Register our spi controller */ + err = devm_spi_register_master(&pdev->dev, master); + if (err) + goto exit; + + return 0; + +exit_busy: + err = -EBUSY; +exit: + spi_master_put(master); + return err; +} + +static const struct of_device_id jcore_spi_of_match[] = { + { .compatible = "jcore,spi2" }, + {}, +}; +MODULE_DEVICE_TABLE(of, jcore_spi_of_match); + +static struct platform_driver jcore_spi_driver = { + .probe = jcore_spi_probe, + .driver = { + .name = DRV_NAME, + .of_match_table = jcore_spi_of_match, + }, +}; + +module_platform_driver(jcore_spi_driver); + +MODULE_DESCRIPTION("J-Core SPI driver"); +MODULE_AUTHOR("Rich Felker <dalias@libc.org>"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:" DRV_NAME); |