diff options
Diffstat (limited to '')
| -rw-r--r-- | drivers/thermal/qcom/Kconfig | 22 | ||||
| -rw-r--r-- | drivers/thermal/qcom/Makefile | 6 | ||||
| -rw-r--r-- | drivers/thermal/qcom/qcom-spmi-temp-alarm.c | 457 | ||||
| -rw-r--r-- | drivers/thermal/qcom/tsens-8960.c | 285 | ||||
| -rw-r--r-- | drivers/thermal/qcom/tsens-v0_1.c | 542 | ||||
| -rw-r--r-- | drivers/thermal/qcom/tsens-v1.c | 389 | ||||
| -rw-r--r-- | drivers/thermal/qcom/tsens-v2.c | 110 | ||||
| -rw-r--r-- | drivers/thermal/qcom/tsens.c | 1096 | ||||
| -rw-r--r-- | drivers/thermal/qcom/tsens.h | 596 |
9 files changed, 3503 insertions, 0 deletions
diff --git a/drivers/thermal/qcom/Kconfig b/drivers/thermal/qcom/Kconfig new file mode 100644 index 000000000..aa9c1d80f --- /dev/null +++ b/drivers/thermal/qcom/Kconfig @@ -0,0 +1,22 @@ +# SPDX-License-Identifier: GPL-2.0-only +config QCOM_TSENS + tristate "Qualcomm TSENS Temperature Alarm" + depends on QCOM_QFPROM + depends on ARCH_QCOM || COMPILE_TEST + help + This enables the thermal sysfs driver for the TSENS device. It shows + up in Sysfs as a thermal zone with multiple trip points. Disabling the + thermal zone device via the mode file results in disabling the sensor. + Also able to set threshold temperature for both hot and cold and update + when a threshold is reached. + +config QCOM_SPMI_TEMP_ALARM + tristate "Qualcomm SPMI PMIC Temperature Alarm" + depends on OF && SPMI && IIO + select REGMAP_SPMI + help + This enables a thermal sysfs driver for Qualcomm plug-and-play (QPNP) + PMIC devices. It shows up in sysfs as a thermal sensor with multiple + trip points. The temperature reported by the thermal sensor reflects the + real time die temperature if an ADC is present or an estimate of the + temperature based upon the over temperature stage value. diff --git a/drivers/thermal/qcom/Makefile b/drivers/thermal/qcom/Makefile new file mode 100644 index 000000000..ec86eef7f --- /dev/null +++ b/drivers/thermal/qcom/Makefile @@ -0,0 +1,6 @@ +# SPDX-License-Identifier: GPL-2.0-only +obj-$(CONFIG_QCOM_TSENS) += qcom_tsens.o + +qcom_tsens-y += tsens.o tsens-v2.o tsens-v1.o tsens-v0_1.o \ + tsens-8960.o +obj-$(CONFIG_QCOM_SPMI_TEMP_ALARM) += qcom-spmi-temp-alarm.o diff --git a/drivers/thermal/qcom/qcom-spmi-temp-alarm.c b/drivers/thermal/qcom/qcom-spmi-temp-alarm.c new file mode 100644 index 000000000..6dc879fea --- /dev/null +++ b/drivers/thermal/qcom/qcom-spmi-temp-alarm.c @@ -0,0 +1,457 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (c) 2011-2015, 2017, 2020, The Linux Foundation. All rights reserved. + */ + +#include <linux/bitops.h> +#include <linux/delay.h> +#include <linux/err.h> +#include <linux/iio/consumer.h> +#include <linux/interrupt.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <linux/platform_device.h> +#include <linux/regmap.h> +#include <linux/thermal.h> + +#include "../thermal_core.h" + +#define QPNP_TM_REG_TYPE 0x04 +#define QPNP_TM_REG_SUBTYPE 0x05 +#define QPNP_TM_REG_STATUS 0x08 +#define QPNP_TM_REG_SHUTDOWN_CTRL1 0x40 +#define QPNP_TM_REG_ALARM_CTRL 0x46 + +#define QPNP_TM_TYPE 0x09 +#define QPNP_TM_SUBTYPE_GEN1 0x08 +#define QPNP_TM_SUBTYPE_GEN2 0x09 + +#define STATUS_GEN1_STAGE_MASK GENMASK(1, 0) +#define STATUS_GEN2_STATE_MASK GENMASK(6, 4) +#define STATUS_GEN2_STATE_SHIFT 4 + +#define SHUTDOWN_CTRL1_OVERRIDE_S2 BIT(6) +#define SHUTDOWN_CTRL1_THRESHOLD_MASK GENMASK(1, 0) + +#define SHUTDOWN_CTRL1_RATE_25HZ BIT(3) + +#define ALARM_CTRL_FORCE_ENABLE BIT(7) + +/* + * Trip point values based on threshold control + * 0 = {105 C, 125 C, 145 C} + * 1 = {110 C, 130 C, 150 C} + * 2 = {115 C, 135 C, 155 C} + * 3 = {120 C, 140 C, 160 C} +*/ +#define TEMP_STAGE_STEP 20000 /* Stage step: 20.000 C */ +#define TEMP_STAGE_HYSTERESIS 2000 + +#define TEMP_THRESH_MIN 105000 /* Threshold Min: 105 C */ +#define TEMP_THRESH_STEP 5000 /* Threshold step: 5 C */ + +#define THRESH_MIN 0 +#define THRESH_MAX 3 + +/* Stage 2 Threshold Min: 125 C */ +#define STAGE2_THRESHOLD_MIN 125000 +/* Stage 2 Threshold Max: 140 C */ +#define STAGE2_THRESHOLD_MAX 140000 + +/* Temperature in Milli Celsius reported during stage 0 if no ADC is present */ +#define DEFAULT_TEMP 37000 + +struct qpnp_tm_chip { + struct regmap *map; + struct device *dev; + struct thermal_zone_device *tz_dev; + unsigned int subtype; + long temp; + unsigned int thresh; + unsigned int stage; + unsigned int prev_stage; + unsigned int base; + /* protects .thresh, .stage and chip registers */ + struct mutex lock; + bool initialized; + + struct iio_channel *adc; +}; + +/* This array maps from GEN2 alarm state to GEN1 alarm stage */ +static const unsigned int alarm_state_map[8] = {0, 1, 1, 2, 2, 3, 3, 3}; + +static int qpnp_tm_read(struct qpnp_tm_chip *chip, u16 addr, u8 *data) +{ + unsigned int val; + int ret; + + ret = regmap_read(chip->map, chip->base + addr, &val); + if (ret < 0) + return ret; + + *data = val; + return 0; +} + +static int qpnp_tm_write(struct qpnp_tm_chip *chip, u16 addr, u8 data) +{ + return regmap_write(chip->map, chip->base + addr, data); +} + +/** + * qpnp_tm_get_temp_stage() - return over-temperature stage + * @chip: Pointer to the qpnp_tm chip + * + * Return: stage (GEN1) or state (GEN2) on success, or errno on failure. + */ +static int qpnp_tm_get_temp_stage(struct qpnp_tm_chip *chip) +{ + int ret; + u8 reg = 0; + + ret = qpnp_tm_read(chip, QPNP_TM_REG_STATUS, ®); + if (ret < 0) + return ret; + + if (chip->subtype == QPNP_TM_SUBTYPE_GEN1) + ret = reg & STATUS_GEN1_STAGE_MASK; + else + ret = (reg & STATUS_GEN2_STATE_MASK) >> STATUS_GEN2_STATE_SHIFT; + + return ret; +} + +/* + * This function updates the internal temp value based on the + * current thermal stage and threshold as well as the previous stage + */ +static int qpnp_tm_update_temp_no_adc(struct qpnp_tm_chip *chip) +{ + unsigned int stage, stage_new, stage_old; + int ret; + + WARN_ON(!mutex_is_locked(&chip->lock)); + + ret = qpnp_tm_get_temp_stage(chip); + if (ret < 0) + return ret; + stage = ret; + + if (chip->subtype == QPNP_TM_SUBTYPE_GEN1) { + stage_new = stage; + stage_old = chip->stage; + } else { + stage_new = alarm_state_map[stage]; + stage_old = alarm_state_map[chip->stage]; + } + + if (stage_new > stage_old) { + /* increasing stage, use lower bound */ + chip->temp = (stage_new - 1) * TEMP_STAGE_STEP + + chip->thresh * TEMP_THRESH_STEP + + TEMP_STAGE_HYSTERESIS + TEMP_THRESH_MIN; + } else if (stage_new < stage_old) { + /* decreasing stage, use upper bound */ + chip->temp = stage_new * TEMP_STAGE_STEP + + chip->thresh * TEMP_THRESH_STEP - + TEMP_STAGE_HYSTERESIS + TEMP_THRESH_MIN; + } + + chip->stage = stage; + + return 0; +} + +static int qpnp_tm_get_temp(void *data, int *temp) +{ + struct qpnp_tm_chip *chip = data; + int ret, mili_celsius; + + if (!temp) + return -EINVAL; + + if (!chip->initialized) { + *temp = DEFAULT_TEMP; + return 0; + } + + if (!chip->adc) { + mutex_lock(&chip->lock); + ret = qpnp_tm_update_temp_no_adc(chip); + mutex_unlock(&chip->lock); + if (ret < 0) + return ret; + } else { + ret = iio_read_channel_processed(chip->adc, &mili_celsius); + if (ret < 0) + return ret; + + chip->temp = mili_celsius; + } + + *temp = chip->temp; + + return 0; +} + +static int qpnp_tm_update_critical_trip_temp(struct qpnp_tm_chip *chip, + int temp) +{ + u8 reg; + bool disable_s2_shutdown = false; + + WARN_ON(!mutex_is_locked(&chip->lock)); + + /* + * Default: S2 and S3 shutdown enabled, thresholds at + * 105C/125C/145C, monitoring at 25Hz + */ + reg = SHUTDOWN_CTRL1_RATE_25HZ; + + if (temp == THERMAL_TEMP_INVALID || + temp < STAGE2_THRESHOLD_MIN) { + chip->thresh = THRESH_MIN; + goto skip; + } + + if (temp <= STAGE2_THRESHOLD_MAX) { + chip->thresh = THRESH_MAX - + ((STAGE2_THRESHOLD_MAX - temp) / + TEMP_THRESH_STEP); + disable_s2_shutdown = true; + } else { + chip->thresh = THRESH_MAX; + + if (chip->adc) + disable_s2_shutdown = true; + else + dev_warn(chip->dev, + "No ADC is configured and critical temperature is above the maximum stage 2 threshold of 140 C! Configuring stage 2 shutdown at 140 C.\n"); + } + +skip: + reg |= chip->thresh; + if (disable_s2_shutdown) + reg |= SHUTDOWN_CTRL1_OVERRIDE_S2; + + return qpnp_tm_write(chip, QPNP_TM_REG_SHUTDOWN_CTRL1, reg); +} + +static int qpnp_tm_set_trip_temp(void *data, int trip, int temp) +{ + struct qpnp_tm_chip *chip = data; + const struct thermal_trip *trip_points; + int ret; + + trip_points = of_thermal_get_trip_points(chip->tz_dev); + if (!trip_points) + return -EINVAL; + + if (trip_points[trip].type != THERMAL_TRIP_CRITICAL) + return 0; + + mutex_lock(&chip->lock); + ret = qpnp_tm_update_critical_trip_temp(chip, temp); + mutex_unlock(&chip->lock); + + return ret; +} + +static const struct thermal_zone_of_device_ops qpnp_tm_sensor_ops = { + .get_temp = qpnp_tm_get_temp, + .set_trip_temp = qpnp_tm_set_trip_temp, +}; + +static irqreturn_t qpnp_tm_isr(int irq, void *data) +{ + struct qpnp_tm_chip *chip = data; + + thermal_zone_device_update(chip->tz_dev, THERMAL_EVENT_UNSPECIFIED); + + return IRQ_HANDLED; +} + +static int qpnp_tm_get_critical_trip_temp(struct qpnp_tm_chip *chip) +{ + int ntrips; + const struct thermal_trip *trips; + int i; + + ntrips = of_thermal_get_ntrips(chip->tz_dev); + if (ntrips <= 0) + return THERMAL_TEMP_INVALID; + + trips = of_thermal_get_trip_points(chip->tz_dev); + if (!trips) + return THERMAL_TEMP_INVALID; + + for (i = 0; i < ntrips; i++) { + if (of_thermal_is_trip_valid(chip->tz_dev, i) && + trips[i].type == THERMAL_TRIP_CRITICAL) + return trips[i].temperature; + } + + return THERMAL_TEMP_INVALID; +} + +/* + * This function initializes the internal temp value based on only the + * current thermal stage and threshold. Setup threshold control and + * disable shutdown override. + */ +static int qpnp_tm_init(struct qpnp_tm_chip *chip) +{ + unsigned int stage; + int ret; + u8 reg = 0; + int crit_temp; + + mutex_lock(&chip->lock); + + ret = qpnp_tm_read(chip, QPNP_TM_REG_SHUTDOWN_CTRL1, ®); + if (ret < 0) + goto out; + + chip->thresh = reg & SHUTDOWN_CTRL1_THRESHOLD_MASK; + chip->temp = DEFAULT_TEMP; + + ret = qpnp_tm_get_temp_stage(chip); + if (ret < 0) + goto out; + chip->stage = ret; + + stage = chip->subtype == QPNP_TM_SUBTYPE_GEN1 + ? chip->stage : alarm_state_map[chip->stage]; + + if (stage) + chip->temp = chip->thresh * TEMP_THRESH_STEP + + (stage - 1) * TEMP_STAGE_STEP + + TEMP_THRESH_MIN; + + crit_temp = qpnp_tm_get_critical_trip_temp(chip); + ret = qpnp_tm_update_critical_trip_temp(chip, crit_temp); + if (ret < 0) + goto out; + + /* Enable the thermal alarm PMIC module in always-on mode. */ + reg = ALARM_CTRL_FORCE_ENABLE; + ret = qpnp_tm_write(chip, QPNP_TM_REG_ALARM_CTRL, reg); + + chip->initialized = true; + +out: + mutex_unlock(&chip->lock); + return ret; +} + +static int qpnp_tm_probe(struct platform_device *pdev) +{ + struct qpnp_tm_chip *chip; + struct device_node *node; + u8 type, subtype; + u32 res; + int ret, irq; + + node = pdev->dev.of_node; + + chip = devm_kzalloc(&pdev->dev, sizeof(*chip), GFP_KERNEL); + if (!chip) + return -ENOMEM; + + dev_set_drvdata(&pdev->dev, chip); + chip->dev = &pdev->dev; + + mutex_init(&chip->lock); + + chip->map = dev_get_regmap(pdev->dev.parent, NULL); + if (!chip->map) + return -ENXIO; + + ret = of_property_read_u32(node, "reg", &res); + if (ret < 0) + return ret; + + irq = platform_get_irq(pdev, 0); + if (irq < 0) + return irq; + + /* ADC based measurements are optional */ + chip->adc = devm_iio_channel_get(&pdev->dev, "thermal"); + if (IS_ERR(chip->adc)) { + ret = PTR_ERR(chip->adc); + chip->adc = NULL; + if (ret == -EPROBE_DEFER) + return ret; + } + + chip->base = res; + + ret = qpnp_tm_read(chip, QPNP_TM_REG_TYPE, &type); + if (ret < 0) { + dev_err(&pdev->dev, "could not read type\n"); + return ret; + } + + ret = qpnp_tm_read(chip, QPNP_TM_REG_SUBTYPE, &subtype); + if (ret < 0) { + dev_err(&pdev->dev, "could not read subtype\n"); + return ret; + } + + if (type != QPNP_TM_TYPE || (subtype != QPNP_TM_SUBTYPE_GEN1 + && subtype != QPNP_TM_SUBTYPE_GEN2)) { + dev_err(&pdev->dev, "invalid type 0x%02x or subtype 0x%02x\n", + type, subtype); + return -ENODEV; + } + + chip->subtype = subtype; + + /* + * Register the sensor before initializing the hardware to be able to + * read the trip points. get_temp() returns the default temperature + * before the hardware initialization is completed. + */ + chip->tz_dev = devm_thermal_zone_of_sensor_register( + &pdev->dev, 0, chip, &qpnp_tm_sensor_ops); + if (IS_ERR(chip->tz_dev)) { + dev_err(&pdev->dev, "failed to register sensor\n"); + return PTR_ERR(chip->tz_dev); + } + + ret = qpnp_tm_init(chip); + if (ret < 0) { + dev_err(&pdev->dev, "init failed\n"); + return ret; + } + + ret = devm_request_threaded_irq(&pdev->dev, irq, NULL, qpnp_tm_isr, + IRQF_ONESHOT, node->name, chip); + if (ret < 0) + return ret; + + thermal_zone_device_update(chip->tz_dev, THERMAL_EVENT_UNSPECIFIED); + + return 0; +} + +static const struct of_device_id qpnp_tm_match_table[] = { + { .compatible = "qcom,spmi-temp-alarm" }, + { } +}; +MODULE_DEVICE_TABLE(of, qpnp_tm_match_table); + +static struct platform_driver qpnp_tm_driver = { + .driver = { + .name = "spmi-temp-alarm", + .of_match_table = qpnp_tm_match_table, + }, + .probe = qpnp_tm_probe, +}; +module_platform_driver(qpnp_tm_driver); + +MODULE_ALIAS("platform:spmi-temp-alarm"); +MODULE_DESCRIPTION("QPNP PMIC Temperature Alarm driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/thermal/qcom/tsens-8960.c b/drivers/thermal/qcom/tsens-8960.c new file mode 100644 index 000000000..2a28a5af2 --- /dev/null +++ b/drivers/thermal/qcom/tsens-8960.c @@ -0,0 +1,285 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2015, The Linux Foundation. All rights reserved. + */ + +#include <linux/platform_device.h> +#include <linux/delay.h> +#include <linux/bitops.h> +#include <linux/regmap.h> +#include <linux/thermal.h> +#include "tsens.h" + +#define CAL_MDEGC 30000 + +#define CONFIG_ADDR 0x3640 +#define CONFIG_ADDR_8660 0x3620 +/* CONFIG_ADDR bitmasks */ +#define CONFIG 0x9b +#define CONFIG_MASK 0xf +#define CONFIG_8660 1 +#define CONFIG_SHIFT_8660 28 +#define CONFIG_MASK_8660 (3 << CONFIG_SHIFT_8660) + +#define STATUS_CNTL_ADDR_8064 0x3660 +#define CNTL_ADDR 0x3620 +/* CNTL_ADDR bitmasks */ +#define EN BIT(0) +#define SW_RST BIT(1) +#define SENSOR0_EN BIT(3) +#define SLP_CLK_ENA BIT(26) +#define SLP_CLK_ENA_8660 BIT(24) +#define MEASURE_PERIOD 1 +#define SENSOR0_SHIFT 3 + +/* INT_STATUS_ADDR bitmasks */ +#define MIN_STATUS_MASK BIT(0) +#define LOWER_STATUS_CLR BIT(1) +#define UPPER_STATUS_CLR BIT(2) +#define MAX_STATUS_MASK BIT(3) + +#define THRESHOLD_ADDR 0x3624 +/* THRESHOLD_ADDR bitmasks */ +#define THRESHOLD_MAX_LIMIT_SHIFT 24 +#define THRESHOLD_MIN_LIMIT_SHIFT 16 +#define THRESHOLD_UPPER_LIMIT_SHIFT 8 +#define THRESHOLD_LOWER_LIMIT_SHIFT 0 + +/* Initial temperature threshold values */ +#define LOWER_LIMIT_TH 0x50 +#define UPPER_LIMIT_TH 0xdf +#define MIN_LIMIT_TH 0x0 +#define MAX_LIMIT_TH 0xff + +#define S0_STATUS_ADDR 0x3628 +#define INT_STATUS_ADDR 0x363c +#define TRDY_MASK BIT(7) +#define TIMEOUT_US 100 + +static int suspend_8960(struct tsens_priv *priv) +{ + int ret; + unsigned int mask; + struct regmap *map = priv->tm_map; + + ret = regmap_read(map, THRESHOLD_ADDR, &priv->ctx.threshold); + if (ret) + return ret; + + ret = regmap_read(map, CNTL_ADDR, &priv->ctx.control); + if (ret) + return ret; + + if (priv->num_sensors > 1) + mask = SLP_CLK_ENA | EN; + else + mask = SLP_CLK_ENA_8660 | EN; + + ret = regmap_update_bits(map, CNTL_ADDR, mask, 0); + if (ret) + return ret; + + return 0; +} + +static int resume_8960(struct tsens_priv *priv) +{ + int ret; + struct regmap *map = priv->tm_map; + + ret = regmap_update_bits(map, CNTL_ADDR, SW_RST, SW_RST); + if (ret) + return ret; + + /* + * Separate CONFIG restore is not needed only for 8660 as + * config is part of CTRL Addr and its restored as such + */ + if (priv->num_sensors > 1) { + ret = regmap_update_bits(map, CONFIG_ADDR, CONFIG_MASK, CONFIG); + if (ret) + return ret; + } + + ret = regmap_write(map, THRESHOLD_ADDR, priv->ctx.threshold); + if (ret) + return ret; + + ret = regmap_write(map, CNTL_ADDR, priv->ctx.control); + if (ret) + return ret; + + return 0; +} + +static int enable_8960(struct tsens_priv *priv, int id) +{ + int ret; + u32 reg, mask; + + ret = regmap_read(priv->tm_map, CNTL_ADDR, ®); + if (ret) + return ret; + + mask = BIT(id + SENSOR0_SHIFT); + ret = regmap_write(priv->tm_map, CNTL_ADDR, reg | SW_RST); + if (ret) + return ret; + + if (priv->num_sensors > 1) + reg |= mask | SLP_CLK_ENA | EN; + else + reg |= mask | SLP_CLK_ENA_8660 | EN; + + ret = regmap_write(priv->tm_map, CNTL_ADDR, reg); + if (ret) + return ret; + + return 0; +} + +static void disable_8960(struct tsens_priv *priv) +{ + int ret; + u32 reg_cntl; + u32 mask; + + mask = GENMASK(priv->num_sensors - 1, 0); + mask <<= SENSOR0_SHIFT; + mask |= EN; + + ret = regmap_read(priv->tm_map, CNTL_ADDR, ®_cntl); + if (ret) + return; + + reg_cntl &= ~mask; + + if (priv->num_sensors > 1) + reg_cntl &= ~SLP_CLK_ENA; + else + reg_cntl &= ~SLP_CLK_ENA_8660; + + regmap_write(priv->tm_map, CNTL_ADDR, reg_cntl); +} + +static int init_8960(struct tsens_priv *priv) +{ + int ret, i; + u32 reg_cntl; + + priv->tm_map = dev_get_regmap(priv->dev, NULL); + if (!priv->tm_map) + return -ENODEV; + + /* + * The status registers for each sensor are discontiguous + * because some SoCs have 5 sensors while others have more + * but the control registers stay in the same place, i.e + * directly after the first 5 status registers. + */ + for (i = 0; i < priv->num_sensors; i++) { + if (i >= 5) + priv->sensor[i].status = S0_STATUS_ADDR + 40; + priv->sensor[i].status += i * 4; + } + + reg_cntl = SW_RST; + ret = regmap_update_bits(priv->tm_map, CNTL_ADDR, SW_RST, reg_cntl); + if (ret) + return ret; + + if (priv->num_sensors > 1) { + reg_cntl |= SLP_CLK_ENA | (MEASURE_PERIOD << 18); + reg_cntl &= ~SW_RST; + ret = regmap_update_bits(priv->tm_map, CONFIG_ADDR, + CONFIG_MASK, CONFIG); + } else { + reg_cntl |= SLP_CLK_ENA_8660 | (MEASURE_PERIOD << 16); + reg_cntl &= ~CONFIG_MASK_8660; + reg_cntl |= CONFIG_8660 << CONFIG_SHIFT_8660; + } + + reg_cntl |= GENMASK(priv->num_sensors - 1, 0) << SENSOR0_SHIFT; + ret = regmap_write(priv->tm_map, CNTL_ADDR, reg_cntl); + if (ret) + return ret; + + reg_cntl |= EN; + ret = regmap_write(priv->tm_map, CNTL_ADDR, reg_cntl); + if (ret) + return ret; + + return 0; +} + +static int calibrate_8960(struct tsens_priv *priv) +{ + int i; + char *data; + + ssize_t num_read = priv->num_sensors; + struct tsens_sensor *s = priv->sensor; + + data = qfprom_read(priv->dev, "calib"); + if (IS_ERR(data)) + data = qfprom_read(priv->dev, "calib_backup"); + if (IS_ERR(data)) + return PTR_ERR(data); + + for (i = 0; i < num_read; i++, s++) + s->offset = data[i]; + + kfree(data); + + return 0; +} + +/* Temperature on y axis and ADC-code on x-axis */ +static inline int code_to_mdegC(u32 adc_code, const struct tsens_sensor *s) +{ + int slope, offset; + + slope = thermal_zone_get_slope(s->tzd); + offset = CAL_MDEGC - slope * s->offset; + + return adc_code * slope + offset; +} + +static int get_temp_8960(const struct tsens_sensor *s, int *temp) +{ + int ret; + u32 code, trdy; + struct tsens_priv *priv = s->priv; + unsigned long timeout; + + timeout = jiffies + usecs_to_jiffies(TIMEOUT_US); + do { + ret = regmap_read(priv->tm_map, INT_STATUS_ADDR, &trdy); + if (ret) + return ret; + if (!(trdy & TRDY_MASK)) + continue; + ret = regmap_read(priv->tm_map, s->status, &code); + if (ret) + return ret; + *temp = code_to_mdegC(code, s); + return 0; + } while (time_before(jiffies, timeout)); + + return -ETIMEDOUT; +} + +static const struct tsens_ops ops_8960 = { + .init = init_8960, + .calibrate = calibrate_8960, + .get_temp = get_temp_8960, + .enable = enable_8960, + .disable = disable_8960, + .suspend = suspend_8960, + .resume = resume_8960, +}; + +struct tsens_plat_data data_8960 = { + .num_sensors = 11, + .ops = &ops_8960, +}; diff --git a/drivers/thermal/qcom/tsens-v0_1.c b/drivers/thermal/qcom/tsens-v0_1.c new file mode 100644 index 000000000..9b8ba429a --- /dev/null +++ b/drivers/thermal/qcom/tsens-v0_1.c @@ -0,0 +1,542 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2015, The Linux Foundation. All rights reserved. + */ + +#include <linux/platform_device.h> +#include "tsens.h" + +/* ----- SROT ------ */ +#define SROT_CTRL_OFF 0x0000 + +/* ----- TM ------ */ +#define TM_INT_EN_OFF 0x0000 +#define TM_Sn_UPPER_LOWER_STATUS_CTRL_OFF 0x0004 +#define TM_Sn_STATUS_OFF 0x0030 +#define TM_TRDY_OFF 0x005c + +/* eeprom layout data for 8916 */ +#define MSM8916_BASE0_MASK 0x0000007f +#define MSM8916_BASE1_MASK 0xfe000000 +#define MSM8916_BASE0_SHIFT 0 +#define MSM8916_BASE1_SHIFT 25 + +#define MSM8916_S0_P1_MASK 0x00000f80 +#define MSM8916_S1_P1_MASK 0x003e0000 +#define MSM8916_S2_P1_MASK 0xf8000000 +#define MSM8916_S3_P1_MASK 0x000003e0 +#define MSM8916_S4_P1_MASK 0x000f8000 + +#define MSM8916_S0_P2_MASK 0x0001f000 +#define MSM8916_S1_P2_MASK 0x07c00000 +#define MSM8916_S2_P2_MASK 0x0000001f +#define MSM8916_S3_P2_MASK 0x00007c00 +#define MSM8916_S4_P2_MASK 0x01f00000 + +#define MSM8916_S0_P1_SHIFT 7 +#define MSM8916_S1_P1_SHIFT 17 +#define MSM8916_S2_P1_SHIFT 27 +#define MSM8916_S3_P1_SHIFT 5 +#define MSM8916_S4_P1_SHIFT 15 + +#define MSM8916_S0_P2_SHIFT 12 +#define MSM8916_S1_P2_SHIFT 22 +#define MSM8916_S2_P2_SHIFT 0 +#define MSM8916_S3_P2_SHIFT 10 +#define MSM8916_S4_P2_SHIFT 20 + +#define MSM8916_CAL_SEL_MASK 0xe0000000 +#define MSM8916_CAL_SEL_SHIFT 29 + +/* eeprom layout data for 8939 */ +#define MSM8939_BASE0_MASK 0x000000ff +#define MSM8939_BASE1_MASK 0xff000000 +#define MSM8939_BASE0_SHIFT 0 +#define MSM8939_BASE1_SHIFT 24 + +#define MSM8939_S0_P1_MASK 0x000001f8 +#define MSM8939_S1_P1_MASK 0x001f8000 +#define MSM8939_S2_P1_MASK_0_4 0xf8000000 +#define MSM8939_S2_P1_MASK_5 0x00000001 +#define MSM8939_S3_P1_MASK 0x00001f80 +#define MSM8939_S4_P1_MASK 0x01f80000 +#define MSM8939_S5_P1_MASK 0x00003f00 +#define MSM8939_S6_P1_MASK 0x03f00000 +#define MSM8939_S7_P1_MASK 0x0000003f +#define MSM8939_S8_P1_MASK 0x0003f000 +#define MSM8939_S9_P1_MASK 0x07e00000 + +#define MSM8939_S0_P2_MASK 0x00007e00 +#define MSM8939_S1_P2_MASK 0x07e00000 +#define MSM8939_S2_P2_MASK 0x0000007e +#define MSM8939_S3_P2_MASK 0x0007e000 +#define MSM8939_S4_P2_MASK 0x7e000000 +#define MSM8939_S5_P2_MASK 0x000fc000 +#define MSM8939_S6_P2_MASK 0xfc000000 +#define MSM8939_S7_P2_MASK 0x00000fc0 +#define MSM8939_S8_P2_MASK 0x00fc0000 +#define MSM8939_S9_P2_MASK_0_4 0xf8000000 +#define MSM8939_S9_P2_MASK_5 0x00002000 + +#define MSM8939_S0_P1_SHIFT 3 +#define MSM8939_S1_P1_SHIFT 15 +#define MSM8939_S2_P1_SHIFT_0_4 27 +#define MSM8939_S2_P1_SHIFT_5 0 +#define MSM8939_S3_P1_SHIFT 7 +#define MSM8939_S4_P1_SHIFT 19 +#define MSM8939_S5_P1_SHIFT 8 +#define MSM8939_S6_P1_SHIFT 20 +#define MSM8939_S7_P1_SHIFT 0 +#define MSM8939_S8_P1_SHIFT 12 +#define MSM8939_S9_P1_SHIFT 21 + +#define MSM8939_S0_P2_SHIFT 9 +#define MSM8939_S1_P2_SHIFT 21 +#define MSM8939_S2_P2_SHIFT 1 +#define MSM8939_S3_P2_SHIFT 13 +#define MSM8939_S4_P2_SHIFT 25 +#define MSM8939_S5_P2_SHIFT 14 +#define MSM8939_S6_P2_SHIFT 26 +#define MSM8939_S7_P2_SHIFT 6 +#define MSM8939_S8_P2_SHIFT 18 +#define MSM8939_S9_P2_SHIFT_0_4 27 +#define MSM8939_S9_P2_SHIFT_5 13 + +#define MSM8939_CAL_SEL_MASK 0x7 +#define MSM8939_CAL_SEL_SHIFT 0 + +/* eeprom layout data for 8974 */ +#define BASE1_MASK 0xff +#define S0_P1_MASK 0x3f00 +#define S1_P1_MASK 0xfc000 +#define S2_P1_MASK 0x3f00000 +#define S3_P1_MASK 0xfc000000 +#define S4_P1_MASK 0x3f +#define S5_P1_MASK 0xfc0 +#define S6_P1_MASK 0x3f000 +#define S7_P1_MASK 0xfc0000 +#define S8_P1_MASK 0x3f000000 +#define S8_P1_MASK_BKP 0x3f +#define S9_P1_MASK 0x3f +#define S9_P1_MASK_BKP 0xfc0 +#define S10_P1_MASK 0xfc0 +#define S10_P1_MASK_BKP 0x3f000 +#define CAL_SEL_0_1 0xc0000000 +#define CAL_SEL_2 0x40000000 +#define CAL_SEL_SHIFT 30 +#define CAL_SEL_SHIFT_2 28 + +#define S0_P1_SHIFT 8 +#define S1_P1_SHIFT 14 +#define S2_P1_SHIFT 20 +#define S3_P1_SHIFT 26 +#define S5_P1_SHIFT 6 +#define S6_P1_SHIFT 12 +#define S7_P1_SHIFT 18 +#define S8_P1_SHIFT 24 +#define S9_P1_BKP_SHIFT 6 +#define S10_P1_SHIFT 6 +#define S10_P1_BKP_SHIFT 12 + +#define BASE2_SHIFT 12 +#define BASE2_BKP_SHIFT 18 +#define S0_P2_SHIFT 20 +#define S0_P2_BKP_SHIFT 26 +#define S1_P2_SHIFT 26 +#define S2_P2_BKP_SHIFT 6 +#define S3_P2_SHIFT 6 +#define S3_P2_BKP_SHIFT 12 +#define S4_P2_SHIFT 12 +#define S4_P2_BKP_SHIFT 18 +#define S5_P2_SHIFT 18 +#define S5_P2_BKP_SHIFT 24 +#define S6_P2_SHIFT 24 +#define S7_P2_BKP_SHIFT 6 +#define S8_P2_SHIFT 6 +#define S8_P2_BKP_SHIFT 12 +#define S9_P2_SHIFT 12 +#define S9_P2_BKP_SHIFT 18 +#define S10_P2_SHIFT 18 +#define S10_P2_BKP_SHIFT 24 + +#define BASE2_MASK 0xff000 +#define BASE2_BKP_MASK 0xfc0000 +#define S0_P2_MASK 0x3f00000 +#define S0_P2_BKP_MASK 0xfc000000 +#define S1_P2_MASK 0xfc000000 +#define S1_P2_BKP_MASK 0x3f +#define S2_P2_MASK 0x3f +#define S2_P2_BKP_MASK 0xfc0 +#define S3_P2_MASK 0xfc0 +#define S3_P2_BKP_MASK 0x3f000 +#define S4_P2_MASK 0x3f000 +#define S4_P2_BKP_MASK 0xfc0000 +#define S5_P2_MASK 0xfc0000 +#define S5_P2_BKP_MASK 0x3f000000 +#define S6_P2_MASK 0x3f000000 +#define S6_P2_BKP_MASK 0x3f +#define S7_P2_MASK 0x3f +#define S7_P2_BKP_MASK 0xfc0 +#define S8_P2_MASK 0xfc0 +#define S8_P2_BKP_MASK 0x3f000 +#define S9_P2_MASK 0x3f000 +#define S9_P2_BKP_MASK 0xfc0000 +#define S10_P2_MASK 0xfc0000 +#define S10_P2_BKP_MASK 0x3f000000 + +#define BKP_SEL 0x3 +#define BKP_REDUN_SEL 0xe0000000 +#define BKP_REDUN_SHIFT 29 + +#define BIT_APPEND 0x3 + +static int calibrate_8916(struct tsens_priv *priv) +{ + int base0 = 0, base1 = 0, i; + u32 p1[5], p2[5]; + int mode = 0; + u32 *qfprom_cdata, *qfprom_csel; + + qfprom_cdata = (u32 *)qfprom_read(priv->dev, "calib"); + if (IS_ERR(qfprom_cdata)) + return PTR_ERR(qfprom_cdata); + + qfprom_csel = (u32 *)qfprom_read(priv->dev, "calib_sel"); + if (IS_ERR(qfprom_csel)) { + kfree(qfprom_cdata); + return PTR_ERR(qfprom_csel); + } + + mode = (qfprom_csel[0] & MSM8916_CAL_SEL_MASK) >> MSM8916_CAL_SEL_SHIFT; + dev_dbg(priv->dev, "calibration mode is %d\n", mode); + + switch (mode) { + case TWO_PT_CALIB: + base1 = (qfprom_cdata[1] & MSM8916_BASE1_MASK) >> MSM8916_BASE1_SHIFT; + p2[0] = (qfprom_cdata[0] & MSM8916_S0_P2_MASK) >> MSM8916_S0_P2_SHIFT; + p2[1] = (qfprom_cdata[0] & MSM8916_S1_P2_MASK) >> MSM8916_S1_P2_SHIFT; + p2[2] = (qfprom_cdata[1] & MSM8916_S2_P2_MASK) >> MSM8916_S2_P2_SHIFT; + p2[3] = (qfprom_cdata[1] & MSM8916_S3_P2_MASK) >> MSM8916_S3_P2_SHIFT; + p2[4] = (qfprom_cdata[1] & MSM8916_S4_P2_MASK) >> MSM8916_S4_P2_SHIFT; + for (i = 0; i < priv->num_sensors; i++) + p2[i] = ((base1 + p2[i]) << 3); + fallthrough; + case ONE_PT_CALIB2: + base0 = (qfprom_cdata[0] & MSM8916_BASE0_MASK); + p1[0] = (qfprom_cdata[0] & MSM8916_S0_P1_MASK) >> MSM8916_S0_P1_SHIFT; + p1[1] = (qfprom_cdata[0] & MSM8916_S1_P1_MASK) >> MSM8916_S1_P1_SHIFT; + p1[2] = (qfprom_cdata[0] & MSM8916_S2_P1_MASK) >> MSM8916_S2_P1_SHIFT; + p1[3] = (qfprom_cdata[1] & MSM8916_S3_P1_MASK) >> MSM8916_S3_P1_SHIFT; + p1[4] = (qfprom_cdata[1] & MSM8916_S4_P1_MASK) >> MSM8916_S4_P1_SHIFT; + for (i = 0; i < priv->num_sensors; i++) + p1[i] = (((base0) + p1[i]) << 3); + break; + default: + for (i = 0; i < priv->num_sensors; i++) { + p1[i] = 500; + p2[i] = 780; + } + break; + } + + compute_intercept_slope(priv, p1, p2, mode); + kfree(qfprom_cdata); + kfree(qfprom_csel); + + return 0; +} + +static int calibrate_8939(struct tsens_priv *priv) +{ + int base0 = 0, base1 = 0, i; + u32 p1[10], p2[10]; + int mode = 0; + u32 *qfprom_cdata; + u32 cdata[6]; + + qfprom_cdata = (u32 *)qfprom_read(priv->dev, "calib"); + if (IS_ERR(qfprom_cdata)) + return PTR_ERR(qfprom_cdata); + + /* Mapping between qfprom nvmem and calibration data */ + cdata[0] = qfprom_cdata[12]; + cdata[1] = qfprom_cdata[13]; + cdata[2] = qfprom_cdata[0]; + cdata[3] = qfprom_cdata[1]; + cdata[4] = qfprom_cdata[22]; + cdata[5] = qfprom_cdata[21]; + + mode = (cdata[0] & MSM8939_CAL_SEL_MASK) >> MSM8939_CAL_SEL_SHIFT; + dev_dbg(priv->dev, "calibration mode is %d\n", mode); + + switch (mode) { + case TWO_PT_CALIB: + base1 = (cdata[3] & MSM8939_BASE1_MASK) >> MSM8939_BASE1_SHIFT; + p2[0] = (cdata[0] & MSM8939_S0_P2_MASK) >> MSM8939_S0_P2_SHIFT; + p2[1] = (cdata[0] & MSM8939_S1_P2_MASK) >> MSM8939_S1_P2_SHIFT; + p2[2] = (cdata[1] & MSM8939_S2_P2_MASK) >> MSM8939_S2_P2_SHIFT; + p2[3] = (cdata[1] & MSM8939_S3_P2_MASK) >> MSM8939_S3_P2_SHIFT; + p2[4] = (cdata[1] & MSM8939_S4_P2_MASK) >> MSM8939_S4_P2_SHIFT; + p2[5] = (cdata[2] & MSM8939_S5_P2_MASK) >> MSM8939_S5_P2_SHIFT; + p2[6] = (cdata[2] & MSM8939_S6_P2_MASK) >> MSM8939_S6_P2_SHIFT; + p2[7] = (cdata[3] & MSM8939_S7_P2_MASK) >> MSM8939_S7_P2_SHIFT; + p2[8] = (cdata[3] & MSM8939_S8_P2_MASK) >> MSM8939_S8_P2_SHIFT; + p2[9] = (cdata[4] & MSM8939_S9_P2_MASK_0_4) >> MSM8939_S9_P2_SHIFT_0_4; + p2[9] |= ((cdata[5] & MSM8939_S9_P2_MASK_5) >> MSM8939_S9_P2_SHIFT_5) << 5; + for (i = 0; i < priv->num_sensors; i++) + p2[i] = (base1 + p2[i]) << 2; + fallthrough; + case ONE_PT_CALIB2: + base0 = (cdata[2] & MSM8939_BASE0_MASK) >> MSM8939_BASE0_SHIFT; + p1[0] = (cdata[0] & MSM8939_S0_P1_MASK) >> MSM8939_S0_P1_SHIFT; + p1[1] = (cdata[0] & MSM8939_S1_P1_MASK) >> MSM8939_S1_P1_SHIFT; + p1[2] = (cdata[0] & MSM8939_S2_P1_MASK_0_4) >> MSM8939_S2_P1_SHIFT_0_4; + p1[2] |= ((cdata[1] & MSM8939_S2_P1_MASK_5) >> MSM8939_S2_P1_SHIFT_5) << 5; + p1[3] = (cdata[1] & MSM8939_S3_P1_MASK) >> MSM8939_S3_P1_SHIFT; + p1[4] = (cdata[1] & MSM8939_S4_P1_MASK) >> MSM8939_S4_P1_SHIFT; + p1[5] = (cdata[2] & MSM8939_S5_P1_MASK) >> MSM8939_S5_P1_SHIFT; + p1[6] = (cdata[2] & MSM8939_S6_P1_MASK) >> MSM8939_S6_P1_SHIFT; + p1[7] = (cdata[3] & MSM8939_S7_P1_MASK) >> MSM8939_S7_P1_SHIFT; + p1[8] = (cdata[3] & MSM8939_S8_P1_MASK) >> MSM8939_S8_P1_SHIFT; + p1[9] = (cdata[4] & MSM8939_S9_P1_MASK) >> MSM8939_S9_P1_SHIFT; + for (i = 0; i < priv->num_sensors; i++) + p1[i] = ((base0) + p1[i]) << 2; + break; + default: + for (i = 0; i < priv->num_sensors; i++) { + p1[i] = 500; + p2[i] = 780; + } + break; + } + + compute_intercept_slope(priv, p1, p2, mode); + kfree(qfprom_cdata); + + return 0; +} + +static int calibrate_8974(struct tsens_priv *priv) +{ + int base1 = 0, base2 = 0, i; + u32 p1[11], p2[11]; + int mode = 0; + u32 *calib, *bkp; + u32 calib_redun_sel; + + calib = (u32 *)qfprom_read(priv->dev, "calib"); + if (IS_ERR(calib)) + return PTR_ERR(calib); + + bkp = (u32 *)qfprom_read(priv->dev, "calib_backup"); + if (IS_ERR(bkp)) { + kfree(calib); + return PTR_ERR(bkp); + } + + calib_redun_sel = bkp[1] & BKP_REDUN_SEL; + calib_redun_sel >>= BKP_REDUN_SHIFT; + + if (calib_redun_sel == BKP_SEL) { + mode = (calib[4] & CAL_SEL_0_1) >> CAL_SEL_SHIFT; + mode |= (calib[5] & CAL_SEL_2) >> CAL_SEL_SHIFT_2; + + switch (mode) { + case TWO_PT_CALIB: + base2 = (bkp[2] & BASE2_BKP_MASK) >> BASE2_BKP_SHIFT; + p2[0] = (bkp[2] & S0_P2_BKP_MASK) >> S0_P2_BKP_SHIFT; + p2[1] = (bkp[3] & S1_P2_BKP_MASK); + p2[2] = (bkp[3] & S2_P2_BKP_MASK) >> S2_P2_BKP_SHIFT; + p2[3] = (bkp[3] & S3_P2_BKP_MASK) >> S3_P2_BKP_SHIFT; + p2[4] = (bkp[3] & S4_P2_BKP_MASK) >> S4_P2_BKP_SHIFT; + p2[5] = (calib[4] & S5_P2_BKP_MASK) >> S5_P2_BKP_SHIFT; + p2[6] = (calib[5] & S6_P2_BKP_MASK); + p2[7] = (calib[5] & S7_P2_BKP_MASK) >> S7_P2_BKP_SHIFT; + p2[8] = (calib[5] & S8_P2_BKP_MASK) >> S8_P2_BKP_SHIFT; + p2[9] = (calib[5] & S9_P2_BKP_MASK) >> S9_P2_BKP_SHIFT; + p2[10] = (calib[5] & S10_P2_BKP_MASK) >> S10_P2_BKP_SHIFT; + fallthrough; + case ONE_PT_CALIB: + case ONE_PT_CALIB2: + base1 = bkp[0] & BASE1_MASK; + p1[0] = (bkp[0] & S0_P1_MASK) >> S0_P1_SHIFT; + p1[1] = (bkp[0] & S1_P1_MASK) >> S1_P1_SHIFT; + p1[2] = (bkp[0] & S2_P1_MASK) >> S2_P1_SHIFT; + p1[3] = (bkp[0] & S3_P1_MASK) >> S3_P1_SHIFT; + p1[4] = (bkp[1] & S4_P1_MASK); + p1[5] = (bkp[1] & S5_P1_MASK) >> S5_P1_SHIFT; + p1[6] = (bkp[1] & S6_P1_MASK) >> S6_P1_SHIFT; + p1[7] = (bkp[1] & S7_P1_MASK) >> S7_P1_SHIFT; + p1[8] = (bkp[2] & S8_P1_MASK_BKP) >> S8_P1_SHIFT; + p1[9] = (bkp[2] & S9_P1_MASK_BKP) >> S9_P1_BKP_SHIFT; + p1[10] = (bkp[2] & S10_P1_MASK_BKP) >> S10_P1_BKP_SHIFT; + break; + } + } else { + mode = (calib[1] & CAL_SEL_0_1) >> CAL_SEL_SHIFT; + mode |= (calib[3] & CAL_SEL_2) >> CAL_SEL_SHIFT_2; + + switch (mode) { + case TWO_PT_CALIB: + base2 = (calib[2] & BASE2_MASK) >> BASE2_SHIFT; + p2[0] = (calib[2] & S0_P2_MASK) >> S0_P2_SHIFT; + p2[1] = (calib[2] & S1_P2_MASK) >> S1_P2_SHIFT; + p2[2] = (calib[3] & S2_P2_MASK); + p2[3] = (calib[3] & S3_P2_MASK) >> S3_P2_SHIFT; + p2[4] = (calib[3] & S4_P2_MASK) >> S4_P2_SHIFT; + p2[5] = (calib[3] & S5_P2_MASK) >> S5_P2_SHIFT; + p2[6] = (calib[3] & S6_P2_MASK) >> S6_P2_SHIFT; + p2[7] = (calib[4] & S7_P2_MASK); + p2[8] = (calib[4] & S8_P2_MASK) >> S8_P2_SHIFT; + p2[9] = (calib[4] & S9_P2_MASK) >> S9_P2_SHIFT; + p2[10] = (calib[4] & S10_P2_MASK) >> S10_P2_SHIFT; + fallthrough; + case ONE_PT_CALIB: + case ONE_PT_CALIB2: + base1 = calib[0] & BASE1_MASK; + p1[0] = (calib[0] & S0_P1_MASK) >> S0_P1_SHIFT; + p1[1] = (calib[0] & S1_P1_MASK) >> S1_P1_SHIFT; + p1[2] = (calib[0] & S2_P1_MASK) >> S2_P1_SHIFT; + p1[3] = (calib[0] & S3_P1_MASK) >> S3_P1_SHIFT; + p1[4] = (calib[1] & S4_P1_MASK); + p1[5] = (calib[1] & S5_P1_MASK) >> S5_P1_SHIFT; + p1[6] = (calib[1] & S6_P1_MASK) >> S6_P1_SHIFT; + p1[7] = (calib[1] & S7_P1_MASK) >> S7_P1_SHIFT; + p1[8] = (calib[1] & S8_P1_MASK) >> S8_P1_SHIFT; + p1[9] = (calib[2] & S9_P1_MASK); + p1[10] = (calib[2] & S10_P1_MASK) >> S10_P1_SHIFT; + break; + } + } + + switch (mode) { + case ONE_PT_CALIB: + for (i = 0; i < priv->num_sensors; i++) + p1[i] += (base1 << 2) | BIT_APPEND; + break; + case TWO_PT_CALIB: + for (i = 0; i < priv->num_sensors; i++) { + p2[i] += base2; + p2[i] <<= 2; + p2[i] |= BIT_APPEND; + } + fallthrough; + case ONE_PT_CALIB2: + for (i = 0; i < priv->num_sensors; i++) { + p1[i] += base1; + p1[i] <<= 2; + p1[i] |= BIT_APPEND; + } + break; + default: + for (i = 0; i < priv->num_sensors; i++) + p2[i] = 780; + p1[0] = 502; + p1[1] = 509; + p1[2] = 503; + p1[3] = 509; + p1[4] = 505; + p1[5] = 509; + p1[6] = 507; + p1[7] = 510; + p1[8] = 508; + p1[9] = 509; + p1[10] = 508; + break; + } + + compute_intercept_slope(priv, p1, p2, mode); + kfree(calib); + kfree(bkp); + + return 0; +} + +/* v0.1: 8916, 8939, 8974 */ + +static struct tsens_features tsens_v0_1_feat = { + .ver_major = VER_0_1, + .crit_int = 0, + .adc = 1, + .srot_split = 1, + .max_sensors = 11, +}; + +static const struct reg_field tsens_v0_1_regfields[MAX_REGFIELDS] = { + /* ----- SROT ------ */ + /* No VERSION information */ + + /* CTRL_OFFSET */ + [TSENS_EN] = REG_FIELD(SROT_CTRL_OFF, 0, 0), + [TSENS_SW_RST] = REG_FIELD(SROT_CTRL_OFF, 1, 1), + + /* ----- TM ------ */ + /* INTERRUPT ENABLE */ + [INT_EN] = REG_FIELD(TM_INT_EN_OFF, 0, 0), + + /* UPPER/LOWER TEMPERATURE THRESHOLDS */ + REG_FIELD_FOR_EACH_SENSOR11(LOW_THRESH, TM_Sn_UPPER_LOWER_STATUS_CTRL_OFF, 0, 9), + REG_FIELD_FOR_EACH_SENSOR11(UP_THRESH, TM_Sn_UPPER_LOWER_STATUS_CTRL_OFF, 10, 19), + + /* UPPER/LOWER INTERRUPTS [CLEAR/STATUS] */ + REG_FIELD_FOR_EACH_SENSOR11(LOW_INT_CLEAR, TM_Sn_UPPER_LOWER_STATUS_CTRL_OFF, 20, 20), + REG_FIELD_FOR_EACH_SENSOR11(UP_INT_CLEAR, TM_Sn_UPPER_LOWER_STATUS_CTRL_OFF, 21, 21), + + /* NO CRITICAL INTERRUPT SUPPORT on v0.1 */ + + /* Sn_STATUS */ + REG_FIELD_FOR_EACH_SENSOR11(LAST_TEMP, TM_Sn_STATUS_OFF, 0, 9), + /* No VALID field on v0.1 */ + /* xxx_STATUS bits: 1 == threshold violated */ + REG_FIELD_FOR_EACH_SENSOR11(MIN_STATUS, TM_Sn_STATUS_OFF, 10, 10), + REG_FIELD_FOR_EACH_SENSOR11(LOWER_STATUS, TM_Sn_STATUS_OFF, 11, 11), + REG_FIELD_FOR_EACH_SENSOR11(UPPER_STATUS, TM_Sn_STATUS_OFF, 12, 12), + /* No CRITICAL field on v0.1 */ + REG_FIELD_FOR_EACH_SENSOR11(MAX_STATUS, TM_Sn_STATUS_OFF, 13, 13), + + /* TRDY: 1=ready, 0=in progress */ + [TRDY] = REG_FIELD(TM_TRDY_OFF, 0, 0), +}; + +static const struct tsens_ops ops_8916 = { + .init = init_common, + .calibrate = calibrate_8916, + .get_temp = get_temp_common, +}; + +struct tsens_plat_data data_8916 = { + .num_sensors = 5, + .ops = &ops_8916, + .hw_ids = (unsigned int []){0, 1, 2, 4, 5 }, + + .feat = &tsens_v0_1_feat, + .fields = tsens_v0_1_regfields, +}; + +static const struct tsens_ops ops_8939 = { + .init = init_common, + .calibrate = calibrate_8939, + .get_temp = get_temp_common, +}; + +struct tsens_plat_data data_8939 = { + .num_sensors = 10, + .ops = &ops_8939, + .hw_ids = (unsigned int []){ 0, 1, 2, 3, 5, 6, 7, 8, 9, 10 }, + + .feat = &tsens_v0_1_feat, + .fields = tsens_v0_1_regfields, +}; + +static const struct tsens_ops ops_8974 = { + .init = init_common, + .calibrate = calibrate_8974, + .get_temp = get_temp_common, +}; + +struct tsens_plat_data data_8974 = { + .num_sensors = 11, + .ops = &ops_8974, + .feat = &tsens_v0_1_feat, + .fields = tsens_v0_1_regfields, +}; diff --git a/drivers/thermal/qcom/tsens-v1.c b/drivers/thermal/qcom/tsens-v1.c new file mode 100644 index 000000000..faa4576fa --- /dev/null +++ b/drivers/thermal/qcom/tsens-v1.c @@ -0,0 +1,389 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2019, Linaro Limited + */ + +#include <linux/bitops.h> +#include <linux/regmap.h> +#include <linux/delay.h> +#include <linux/slab.h> +#include "tsens.h" + +/* ----- SROT ------ */ +#define SROT_HW_VER_OFF 0x0000 +#define SROT_CTRL_OFF 0x0004 + +/* ----- TM ------ */ +#define TM_INT_EN_OFF 0x0000 +#define TM_Sn_UPPER_LOWER_STATUS_CTRL_OFF 0x0004 +#define TM_Sn_STATUS_OFF 0x0044 +#define TM_TRDY_OFF 0x0084 +#define TM_HIGH_LOW_INT_STATUS_OFF 0x0088 +#define TM_HIGH_LOW_Sn_INT_THRESHOLD_OFF 0x0090 + +/* eeprom layout data for msm8956/76 (v1) */ +#define MSM8976_BASE0_MASK 0xff +#define MSM8976_BASE1_MASK 0xff +#define MSM8976_BASE1_SHIFT 8 + +#define MSM8976_S0_P1_MASK 0x3f00 +#define MSM8976_S1_P1_MASK 0x3f00000 +#define MSM8976_S2_P1_MASK 0x3f +#define MSM8976_S3_P1_MASK 0x3f000 +#define MSM8976_S4_P1_MASK 0x3f00 +#define MSM8976_S5_P1_MASK 0x3f00000 +#define MSM8976_S6_P1_MASK 0x3f +#define MSM8976_S7_P1_MASK 0x3f000 +#define MSM8976_S8_P1_MASK 0x1f8 +#define MSM8976_S9_P1_MASK 0x1f8000 +#define MSM8976_S10_P1_MASK 0xf8000000 +#define MSM8976_S10_P1_MASK_1 0x1 + +#define MSM8976_S0_P2_MASK 0xfc000 +#define MSM8976_S1_P2_MASK 0xfc000000 +#define MSM8976_S2_P2_MASK 0xfc0 +#define MSM8976_S3_P2_MASK 0xfc0000 +#define MSM8976_S4_P2_MASK 0xfc000 +#define MSM8976_S5_P2_MASK 0xfc000000 +#define MSM8976_S6_P2_MASK 0xfc0 +#define MSM8976_S7_P2_MASK 0xfc0000 +#define MSM8976_S8_P2_MASK 0x7e00 +#define MSM8976_S9_P2_MASK 0x7e00000 +#define MSM8976_S10_P2_MASK 0x7e + +#define MSM8976_S0_P1_SHIFT 8 +#define MSM8976_S1_P1_SHIFT 20 +#define MSM8976_S2_P1_SHIFT 0 +#define MSM8976_S3_P1_SHIFT 12 +#define MSM8976_S4_P1_SHIFT 8 +#define MSM8976_S5_P1_SHIFT 20 +#define MSM8976_S6_P1_SHIFT 0 +#define MSM8976_S7_P1_SHIFT 12 +#define MSM8976_S8_P1_SHIFT 3 +#define MSM8976_S9_P1_SHIFT 15 +#define MSM8976_S10_P1_SHIFT 27 +#define MSM8976_S10_P1_SHIFT_1 0 + +#define MSM8976_S0_P2_SHIFT 14 +#define MSM8976_S1_P2_SHIFT 26 +#define MSM8976_S2_P2_SHIFT 6 +#define MSM8976_S3_P2_SHIFT 18 +#define MSM8976_S4_P2_SHIFT 14 +#define MSM8976_S5_P2_SHIFT 26 +#define MSM8976_S6_P2_SHIFT 6 +#define MSM8976_S7_P2_SHIFT 18 +#define MSM8976_S8_P2_SHIFT 9 +#define MSM8976_S9_P2_SHIFT 21 +#define MSM8976_S10_P2_SHIFT 1 + +#define MSM8976_CAL_SEL_MASK 0x3 + +/* eeprom layout data for qcs404/405 (v1) */ +#define BASE0_MASK 0x000007f8 +#define BASE1_MASK 0x0007f800 +#define BASE0_SHIFT 3 +#define BASE1_SHIFT 11 + +#define S0_P1_MASK 0x0000003f +#define S1_P1_MASK 0x0003f000 +#define S2_P1_MASK 0x3f000000 +#define S3_P1_MASK 0x000003f0 +#define S4_P1_MASK 0x003f0000 +#define S5_P1_MASK 0x0000003f +#define S6_P1_MASK 0x0003f000 +#define S7_P1_MASK 0x3f000000 +#define S8_P1_MASK 0x000003f0 +#define S9_P1_MASK 0x003f0000 + +#define S0_P2_MASK 0x00000fc0 +#define S1_P2_MASK 0x00fc0000 +#define S2_P2_MASK_1_0 0xc0000000 +#define S2_P2_MASK_5_2 0x0000000f +#define S3_P2_MASK 0x0000fc00 +#define S4_P2_MASK 0x0fc00000 +#define S5_P2_MASK 0x00000fc0 +#define S6_P2_MASK 0x00fc0000 +#define S7_P2_MASK_1_0 0xc0000000 +#define S7_P2_MASK_5_2 0x0000000f +#define S8_P2_MASK 0x0000fc00 +#define S9_P2_MASK 0x0fc00000 + +#define S0_P1_SHIFT 0 +#define S0_P2_SHIFT 6 +#define S1_P1_SHIFT 12 +#define S1_P2_SHIFT 18 +#define S2_P1_SHIFT 24 +#define S2_P2_SHIFT_1_0 30 + +#define S2_P2_SHIFT_5_2 0 +#define S3_P1_SHIFT 4 +#define S3_P2_SHIFT 10 +#define S4_P1_SHIFT 16 +#define S4_P2_SHIFT 22 + +#define S5_P1_SHIFT 0 +#define S5_P2_SHIFT 6 +#define S6_P1_SHIFT 12 +#define S6_P2_SHIFT 18 +#define S7_P1_SHIFT 24 +#define S7_P2_SHIFT_1_0 30 + +#define S7_P2_SHIFT_5_2 0 +#define S8_P1_SHIFT 4 +#define S8_P2_SHIFT 10 +#define S9_P1_SHIFT 16 +#define S9_P2_SHIFT 22 + +#define CAL_SEL_MASK 7 +#define CAL_SEL_SHIFT 0 + +static int calibrate_v1(struct tsens_priv *priv) +{ + u32 base0 = 0, base1 = 0; + u32 p1[10], p2[10]; + u32 mode = 0, lsb = 0, msb = 0; + u32 *qfprom_cdata; + int i; + + qfprom_cdata = (u32 *)qfprom_read(priv->dev, "calib"); + if (IS_ERR(qfprom_cdata)) + return PTR_ERR(qfprom_cdata); + + mode = (qfprom_cdata[4] & CAL_SEL_MASK) >> CAL_SEL_SHIFT; + dev_dbg(priv->dev, "calibration mode is %d\n", mode); + + switch (mode) { + case TWO_PT_CALIB: + base1 = (qfprom_cdata[4] & BASE1_MASK) >> BASE1_SHIFT; + p2[0] = (qfprom_cdata[0] & S0_P2_MASK) >> S0_P2_SHIFT; + p2[1] = (qfprom_cdata[0] & S1_P2_MASK) >> S1_P2_SHIFT; + /* This value is split over two registers, 2 bits and 4 bits */ + lsb = (qfprom_cdata[0] & S2_P2_MASK_1_0) >> S2_P2_SHIFT_1_0; + msb = (qfprom_cdata[1] & S2_P2_MASK_5_2) >> S2_P2_SHIFT_5_2; + p2[2] = msb << 2 | lsb; + p2[3] = (qfprom_cdata[1] & S3_P2_MASK) >> S3_P2_SHIFT; + p2[4] = (qfprom_cdata[1] & S4_P2_MASK) >> S4_P2_SHIFT; + p2[5] = (qfprom_cdata[2] & S5_P2_MASK) >> S5_P2_SHIFT; + p2[6] = (qfprom_cdata[2] & S6_P2_MASK) >> S6_P2_SHIFT; + /* This value is split over two registers, 2 bits and 4 bits */ + lsb = (qfprom_cdata[2] & S7_P2_MASK_1_0) >> S7_P2_SHIFT_1_0; + msb = (qfprom_cdata[3] & S7_P2_MASK_5_2) >> S7_P2_SHIFT_5_2; + p2[7] = msb << 2 | lsb; + p2[8] = (qfprom_cdata[3] & S8_P2_MASK) >> S8_P2_SHIFT; + p2[9] = (qfprom_cdata[3] & S9_P2_MASK) >> S9_P2_SHIFT; + for (i = 0; i < priv->num_sensors; i++) + p2[i] = ((base1 + p2[i]) << 2); + fallthrough; + case ONE_PT_CALIB2: + base0 = (qfprom_cdata[4] & BASE0_MASK) >> BASE0_SHIFT; + p1[0] = (qfprom_cdata[0] & S0_P1_MASK) >> S0_P1_SHIFT; + p1[1] = (qfprom_cdata[0] & S1_P1_MASK) >> S1_P1_SHIFT; + p1[2] = (qfprom_cdata[0] & S2_P1_MASK) >> S2_P1_SHIFT; + p1[3] = (qfprom_cdata[1] & S3_P1_MASK) >> S3_P1_SHIFT; + p1[4] = (qfprom_cdata[1] & S4_P1_MASK) >> S4_P1_SHIFT; + p1[5] = (qfprom_cdata[2] & S5_P1_MASK) >> S5_P1_SHIFT; + p1[6] = (qfprom_cdata[2] & S6_P1_MASK) >> S6_P1_SHIFT; + p1[7] = (qfprom_cdata[2] & S7_P1_MASK) >> S7_P1_SHIFT; + p1[8] = (qfprom_cdata[3] & S8_P1_MASK) >> S8_P1_SHIFT; + p1[9] = (qfprom_cdata[3] & S9_P1_MASK) >> S9_P1_SHIFT; + for (i = 0; i < priv->num_sensors; i++) + p1[i] = (((base0) + p1[i]) << 2); + break; + default: + for (i = 0; i < priv->num_sensors; i++) { + p1[i] = 500; + p2[i] = 780; + } + break; + } + + compute_intercept_slope(priv, p1, p2, mode); + kfree(qfprom_cdata); + + return 0; +} + +static int calibrate_8976(struct tsens_priv *priv) +{ + int base0 = 0, base1 = 0, i; + u32 p1[11], p2[11]; + int mode = 0, tmp = 0; + u32 *qfprom_cdata; + + qfprom_cdata = (u32 *)qfprom_read(priv->dev, "calib"); + if (IS_ERR(qfprom_cdata)) + return PTR_ERR(qfprom_cdata); + + mode = (qfprom_cdata[4] & MSM8976_CAL_SEL_MASK); + dev_dbg(priv->dev, "calibration mode is %d\n", mode); + + switch (mode) { + case TWO_PT_CALIB: + base1 = (qfprom_cdata[2] & MSM8976_BASE1_MASK) >> MSM8976_BASE1_SHIFT; + p2[0] = (qfprom_cdata[0] & MSM8976_S0_P2_MASK) >> MSM8976_S0_P2_SHIFT; + p2[1] = (qfprom_cdata[0] & MSM8976_S1_P2_MASK) >> MSM8976_S1_P2_SHIFT; + p2[2] = (qfprom_cdata[1] & MSM8976_S2_P2_MASK) >> MSM8976_S2_P2_SHIFT; + p2[3] = (qfprom_cdata[1] & MSM8976_S3_P2_MASK) >> MSM8976_S3_P2_SHIFT; + p2[4] = (qfprom_cdata[2] & MSM8976_S4_P2_MASK) >> MSM8976_S4_P2_SHIFT; + p2[5] = (qfprom_cdata[2] & MSM8976_S5_P2_MASK) >> MSM8976_S5_P2_SHIFT; + p2[6] = (qfprom_cdata[3] & MSM8976_S6_P2_MASK) >> MSM8976_S6_P2_SHIFT; + p2[7] = (qfprom_cdata[3] & MSM8976_S7_P2_MASK) >> MSM8976_S7_P2_SHIFT; + p2[8] = (qfprom_cdata[4] & MSM8976_S8_P2_MASK) >> MSM8976_S8_P2_SHIFT; + p2[9] = (qfprom_cdata[4] & MSM8976_S9_P2_MASK) >> MSM8976_S9_P2_SHIFT; + p2[10] = (qfprom_cdata[5] & MSM8976_S10_P2_MASK) >> MSM8976_S10_P2_SHIFT; + + for (i = 0; i < priv->num_sensors; i++) + p2[i] = ((base1 + p2[i]) << 2); + fallthrough; + case ONE_PT_CALIB2: + base0 = qfprom_cdata[0] & MSM8976_BASE0_MASK; + p1[0] = (qfprom_cdata[0] & MSM8976_S0_P1_MASK) >> MSM8976_S0_P1_SHIFT; + p1[1] = (qfprom_cdata[0] & MSM8976_S1_P1_MASK) >> MSM8976_S1_P1_SHIFT; + p1[2] = (qfprom_cdata[1] & MSM8976_S2_P1_MASK) >> MSM8976_S2_P1_SHIFT; + p1[3] = (qfprom_cdata[1] & MSM8976_S3_P1_MASK) >> MSM8976_S3_P1_SHIFT; + p1[4] = (qfprom_cdata[2] & MSM8976_S4_P1_MASK) >> MSM8976_S4_P1_SHIFT; + p1[5] = (qfprom_cdata[2] & MSM8976_S5_P1_MASK) >> MSM8976_S5_P1_SHIFT; + p1[6] = (qfprom_cdata[3] & MSM8976_S6_P1_MASK) >> MSM8976_S6_P1_SHIFT; + p1[7] = (qfprom_cdata[3] & MSM8976_S7_P1_MASK) >> MSM8976_S7_P1_SHIFT; + p1[8] = (qfprom_cdata[4] & MSM8976_S8_P1_MASK) >> MSM8976_S8_P1_SHIFT; + p1[9] = (qfprom_cdata[4] & MSM8976_S9_P1_MASK) >> MSM8976_S9_P1_SHIFT; + p1[10] = (qfprom_cdata[4] & MSM8976_S10_P1_MASK) >> MSM8976_S10_P1_SHIFT; + tmp = (qfprom_cdata[5] & MSM8976_S10_P1_MASK_1) << MSM8976_S10_P1_SHIFT_1; + p1[10] |= tmp; + + for (i = 0; i < priv->num_sensors; i++) + p1[i] = (((base0) + p1[i]) << 2); + break; + default: + for (i = 0; i < priv->num_sensors; i++) { + p1[i] = 500; + p2[i] = 780; + } + break; + } + + compute_intercept_slope(priv, p1, p2, mode); + kfree(qfprom_cdata); + + return 0; +} + +/* v1.x: msm8956,8976,qcs404,405 */ + +static struct tsens_features tsens_v1_feat = { + .ver_major = VER_1_X, + .crit_int = 0, + .adc = 1, + .srot_split = 1, + .max_sensors = 11, +}; + +static const struct reg_field tsens_v1_regfields[MAX_REGFIELDS] = { + /* ----- SROT ------ */ + /* VERSION */ + [VER_MAJOR] = REG_FIELD(SROT_HW_VER_OFF, 28, 31), + [VER_MINOR] = REG_FIELD(SROT_HW_VER_OFF, 16, 27), + [VER_STEP] = REG_FIELD(SROT_HW_VER_OFF, 0, 15), + /* CTRL_OFFSET */ + [TSENS_EN] = REG_FIELD(SROT_CTRL_OFF, 0, 0), + [TSENS_SW_RST] = REG_FIELD(SROT_CTRL_OFF, 1, 1), + [SENSOR_EN] = REG_FIELD(SROT_CTRL_OFF, 3, 13), + + /* ----- TM ------ */ + /* INTERRUPT ENABLE */ + [INT_EN] = REG_FIELD(TM_INT_EN_OFF, 0, 0), + + /* UPPER/LOWER TEMPERATURE THRESHOLDS */ + REG_FIELD_FOR_EACH_SENSOR11(LOW_THRESH, TM_Sn_UPPER_LOWER_STATUS_CTRL_OFF, 0, 9), + REG_FIELD_FOR_EACH_SENSOR11(UP_THRESH, TM_Sn_UPPER_LOWER_STATUS_CTRL_OFF, 10, 19), + + /* UPPER/LOWER INTERRUPTS [CLEAR/STATUS] */ + REG_FIELD_FOR_EACH_SENSOR11(LOW_INT_CLEAR, TM_Sn_UPPER_LOWER_STATUS_CTRL_OFF, 20, 20), + REG_FIELD_FOR_EACH_SENSOR11(UP_INT_CLEAR, TM_Sn_UPPER_LOWER_STATUS_CTRL_OFF, 21, 21), + [LOW_INT_STATUS_0] = REG_FIELD(TM_HIGH_LOW_INT_STATUS_OFF, 0, 0), + [LOW_INT_STATUS_1] = REG_FIELD(TM_HIGH_LOW_INT_STATUS_OFF, 1, 1), + [LOW_INT_STATUS_2] = REG_FIELD(TM_HIGH_LOW_INT_STATUS_OFF, 2, 2), + [LOW_INT_STATUS_3] = REG_FIELD(TM_HIGH_LOW_INT_STATUS_OFF, 3, 3), + [LOW_INT_STATUS_4] = REG_FIELD(TM_HIGH_LOW_INT_STATUS_OFF, 4, 4), + [LOW_INT_STATUS_5] = REG_FIELD(TM_HIGH_LOW_INT_STATUS_OFF, 5, 5), + [LOW_INT_STATUS_6] = REG_FIELD(TM_HIGH_LOW_INT_STATUS_OFF, 6, 6), + [LOW_INT_STATUS_7] = REG_FIELD(TM_HIGH_LOW_INT_STATUS_OFF, 7, 7), + [UP_INT_STATUS_0] = REG_FIELD(TM_HIGH_LOW_INT_STATUS_OFF, 8, 8), + [UP_INT_STATUS_1] = REG_FIELD(TM_HIGH_LOW_INT_STATUS_OFF, 9, 9), + [UP_INT_STATUS_2] = REG_FIELD(TM_HIGH_LOW_INT_STATUS_OFF, 10, 10), + [UP_INT_STATUS_3] = REG_FIELD(TM_HIGH_LOW_INT_STATUS_OFF, 11, 11), + [UP_INT_STATUS_4] = REG_FIELD(TM_HIGH_LOW_INT_STATUS_OFF, 12, 12), + [UP_INT_STATUS_5] = REG_FIELD(TM_HIGH_LOW_INT_STATUS_OFF, 13, 13), + [UP_INT_STATUS_6] = REG_FIELD(TM_HIGH_LOW_INT_STATUS_OFF, 14, 14), + [UP_INT_STATUS_7] = REG_FIELD(TM_HIGH_LOW_INT_STATUS_OFF, 15, 15), + + /* NO CRITICAL INTERRUPT SUPPORT on v1 */ + + /* Sn_STATUS */ + REG_FIELD_FOR_EACH_SENSOR11(LAST_TEMP, TM_Sn_STATUS_OFF, 0, 9), + REG_FIELD_FOR_EACH_SENSOR11(VALID, TM_Sn_STATUS_OFF, 14, 14), + /* xxx_STATUS bits: 1 == threshold violated */ + REG_FIELD_FOR_EACH_SENSOR11(MIN_STATUS, TM_Sn_STATUS_OFF, 10, 10), + REG_FIELD_FOR_EACH_SENSOR11(LOWER_STATUS, TM_Sn_STATUS_OFF, 11, 11), + REG_FIELD_FOR_EACH_SENSOR11(UPPER_STATUS, TM_Sn_STATUS_OFF, 12, 12), + /* No CRITICAL field on v1.x */ + REG_FIELD_FOR_EACH_SENSOR11(MAX_STATUS, TM_Sn_STATUS_OFF, 13, 13), + + /* TRDY: 1=ready, 0=in progress */ + [TRDY] = REG_FIELD(TM_TRDY_OFF, 0, 0), +}; + +static int __init init_8956(struct tsens_priv *priv) { + priv->sensor[0].slope = 3313; + priv->sensor[1].slope = 3275; + priv->sensor[2].slope = 3320; + priv->sensor[3].slope = 3246; + priv->sensor[4].slope = 3279; + priv->sensor[5].slope = 3257; + priv->sensor[6].slope = 3234; + priv->sensor[7].slope = 3269; + priv->sensor[8].slope = 3255; + priv->sensor[9].slope = 3239; + priv->sensor[10].slope = 3286; + + return init_common(priv); +} + +static const struct tsens_ops ops_generic_v1 = { + .init = init_common, + .calibrate = calibrate_v1, + .get_temp = get_temp_tsens_valid, +}; + +struct tsens_plat_data data_tsens_v1 = { + .ops = &ops_generic_v1, + .feat = &tsens_v1_feat, + .fields = tsens_v1_regfields, +}; + +static const struct tsens_ops ops_8956 = { + .init = init_8956, + .calibrate = calibrate_8976, + .get_temp = get_temp_tsens_valid, +}; + +struct tsens_plat_data data_8956 = { + .num_sensors = 11, + .ops = &ops_8956, + .feat = &tsens_v1_feat, + .fields = tsens_v1_regfields, +}; + +static const struct tsens_ops ops_8976 = { + .init = init_common, + .calibrate = calibrate_8976, + .get_temp = get_temp_tsens_valid, +}; + +struct tsens_plat_data data_8976 = { + .num_sensors = 11, + .ops = &ops_8976, + .hw_ids = (unsigned int[]){0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10}, + .feat = &tsens_v1_feat, + .fields = tsens_v1_regfields, +}; diff --git a/drivers/thermal/qcom/tsens-v2.c b/drivers/thermal/qcom/tsens-v2.c new file mode 100644 index 000000000..b293ed321 --- /dev/null +++ b/drivers/thermal/qcom/tsens-v2.c @@ -0,0 +1,110 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2015, The Linux Foundation. All rights reserved. + * Copyright (c) 2018, Linaro Limited + */ + +#include <linux/bitops.h> +#include <linux/regmap.h> +#include "tsens.h" + +/* ----- SROT ------ */ +#define SROT_HW_VER_OFF 0x0000 +#define SROT_CTRL_OFF 0x0004 + +/* ----- TM ------ */ +#define TM_INT_EN_OFF 0x0004 +#define TM_UPPER_LOWER_INT_STATUS_OFF 0x0008 +#define TM_UPPER_LOWER_INT_CLEAR_OFF 0x000c +#define TM_UPPER_LOWER_INT_MASK_OFF 0x0010 +#define TM_CRITICAL_INT_STATUS_OFF 0x0014 +#define TM_CRITICAL_INT_CLEAR_OFF 0x0018 +#define TM_CRITICAL_INT_MASK_OFF 0x001c +#define TM_Sn_UPPER_LOWER_THRESHOLD_OFF 0x0020 +#define TM_Sn_CRITICAL_THRESHOLD_OFF 0x0060 +#define TM_Sn_STATUS_OFF 0x00a0 +#define TM_TRDY_OFF 0x00e4 +#define TM_WDOG_LOG_OFF 0x013c + +/* v2.x: 8996, 8998, sdm845 */ + +static struct tsens_features tsens_v2_feat = { + .ver_major = VER_2_X, + .crit_int = 1, + .adc = 0, + .srot_split = 1, + .max_sensors = 16, +}; + +static const struct reg_field tsens_v2_regfields[MAX_REGFIELDS] = { + /* ----- SROT ------ */ + /* VERSION */ + [VER_MAJOR] = REG_FIELD(SROT_HW_VER_OFF, 28, 31), + [VER_MINOR] = REG_FIELD(SROT_HW_VER_OFF, 16, 27), + [VER_STEP] = REG_FIELD(SROT_HW_VER_OFF, 0, 15), + /* CTRL_OFF */ + [TSENS_EN] = REG_FIELD(SROT_CTRL_OFF, 0, 0), + [TSENS_SW_RST] = REG_FIELD(SROT_CTRL_OFF, 1, 1), + + /* ----- TM ------ */ + /* INTERRUPT ENABLE */ + /* v2 has separate enables for UPPER/LOWER/CRITICAL interrupts */ + [INT_EN] = REG_FIELD(TM_INT_EN_OFF, 0, 2), + + /* TEMPERATURE THRESHOLDS */ + REG_FIELD_FOR_EACH_SENSOR16(LOW_THRESH, TM_Sn_UPPER_LOWER_THRESHOLD_OFF, 0, 11), + REG_FIELD_FOR_EACH_SENSOR16(UP_THRESH, TM_Sn_UPPER_LOWER_THRESHOLD_OFF, 12, 23), + REG_FIELD_FOR_EACH_SENSOR16(CRIT_THRESH, TM_Sn_CRITICAL_THRESHOLD_OFF, 0, 11), + + /* INTERRUPTS [CLEAR/STATUS/MASK] */ + REG_FIELD_SPLIT_BITS_0_15(LOW_INT_STATUS, TM_UPPER_LOWER_INT_STATUS_OFF), + REG_FIELD_SPLIT_BITS_0_15(LOW_INT_CLEAR, TM_UPPER_LOWER_INT_CLEAR_OFF), + REG_FIELD_SPLIT_BITS_0_15(LOW_INT_MASK, TM_UPPER_LOWER_INT_MASK_OFF), + REG_FIELD_SPLIT_BITS_16_31(UP_INT_STATUS, TM_UPPER_LOWER_INT_STATUS_OFF), + REG_FIELD_SPLIT_BITS_16_31(UP_INT_CLEAR, TM_UPPER_LOWER_INT_CLEAR_OFF), + REG_FIELD_SPLIT_BITS_16_31(UP_INT_MASK, TM_UPPER_LOWER_INT_MASK_OFF), + REG_FIELD_SPLIT_BITS_0_15(CRIT_INT_STATUS, TM_CRITICAL_INT_STATUS_OFF), + REG_FIELD_SPLIT_BITS_0_15(CRIT_INT_CLEAR, TM_CRITICAL_INT_CLEAR_OFF), + REG_FIELD_SPLIT_BITS_0_15(CRIT_INT_MASK, TM_CRITICAL_INT_MASK_OFF), + + /* WATCHDOG on v2.3 or later */ + [WDOG_BARK_STATUS] = REG_FIELD(TM_CRITICAL_INT_STATUS_OFF, 31, 31), + [WDOG_BARK_CLEAR] = REG_FIELD(TM_CRITICAL_INT_CLEAR_OFF, 31, 31), + [WDOG_BARK_MASK] = REG_FIELD(TM_CRITICAL_INT_MASK_OFF, 31, 31), + [CC_MON_STATUS] = REG_FIELD(TM_CRITICAL_INT_STATUS_OFF, 30, 30), + [CC_MON_CLEAR] = REG_FIELD(TM_CRITICAL_INT_CLEAR_OFF, 30, 30), + [CC_MON_MASK] = REG_FIELD(TM_CRITICAL_INT_MASK_OFF, 30, 30), + [WDOG_BARK_COUNT] = REG_FIELD(TM_WDOG_LOG_OFF, 0, 7), + + /* Sn_STATUS */ + REG_FIELD_FOR_EACH_SENSOR16(LAST_TEMP, TM_Sn_STATUS_OFF, 0, 11), + REG_FIELD_FOR_EACH_SENSOR16(VALID, TM_Sn_STATUS_OFF, 21, 21), + /* xxx_STATUS bits: 1 == threshold violated */ + REG_FIELD_FOR_EACH_SENSOR16(MIN_STATUS, TM_Sn_STATUS_OFF, 16, 16), + REG_FIELD_FOR_EACH_SENSOR16(LOWER_STATUS, TM_Sn_STATUS_OFF, 17, 17), + REG_FIELD_FOR_EACH_SENSOR16(UPPER_STATUS, TM_Sn_STATUS_OFF, 18, 18), + REG_FIELD_FOR_EACH_SENSOR16(CRITICAL_STATUS, TM_Sn_STATUS_OFF, 19, 19), + REG_FIELD_FOR_EACH_SENSOR16(MAX_STATUS, TM_Sn_STATUS_OFF, 20, 20), + + /* TRDY: 1=ready, 0=in progress */ + [TRDY] = REG_FIELD(TM_TRDY_OFF, 0, 0), +}; + +static const struct tsens_ops ops_generic_v2 = { + .init = init_common, + .get_temp = get_temp_tsens_valid, +}; + +struct tsens_plat_data data_tsens_v2 = { + .ops = &ops_generic_v2, + .feat = &tsens_v2_feat, + .fields = tsens_v2_regfields, +}; + +/* Kept around for backward compatibility with old msm8996.dtsi */ +struct tsens_plat_data data_8996 = { + .num_sensors = 13, + .ops = &ops_generic_v2, + .feat = &tsens_v2_feat, + .fields = tsens_v2_regfields, +}; diff --git a/drivers/thermal/qcom/tsens.c b/drivers/thermal/qcom/tsens.c new file mode 100644 index 000000000..c73792ca7 --- /dev/null +++ b/drivers/thermal/qcom/tsens.c @@ -0,0 +1,1096 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2015, The Linux Foundation. All rights reserved. + * Copyright (c) 2019, 2020, Linaro Ltd. + */ + +#include <linux/debugfs.h> +#include <linux/err.h> +#include <linux/io.h> +#include <linux/module.h> +#include <linux/nvmem-consumer.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/of_platform.h> +#include <linux/platform_device.h> +#include <linux/pm.h> +#include <linux/regmap.h> +#include <linux/slab.h> +#include <linux/thermal.h> +#include "tsens.h" + +/** + * struct tsens_irq_data - IRQ status and temperature violations + * @up_viol: upper threshold violated + * @up_thresh: upper threshold temperature value + * @up_irq_mask: mask register for upper threshold irqs + * @up_irq_clear: clear register for uppper threshold irqs + * @low_viol: lower threshold violated + * @low_thresh: lower threshold temperature value + * @low_irq_mask: mask register for lower threshold irqs + * @low_irq_clear: clear register for lower threshold irqs + * @crit_viol: critical threshold violated + * @crit_thresh: critical threshold temperature value + * @crit_irq_mask: mask register for critical threshold irqs + * @crit_irq_clear: clear register for critical threshold irqs + * + * Structure containing data about temperature threshold settings and + * irq status if they were violated. + */ +struct tsens_irq_data { + u32 up_viol; + int up_thresh; + u32 up_irq_mask; + u32 up_irq_clear; + u32 low_viol; + int low_thresh; + u32 low_irq_mask; + u32 low_irq_clear; + u32 crit_viol; + u32 crit_thresh; + u32 crit_irq_mask; + u32 crit_irq_clear; +}; + +char *qfprom_read(struct device *dev, const char *cname) +{ + struct nvmem_cell *cell; + ssize_t data; + char *ret; + + cell = nvmem_cell_get(dev, cname); + if (IS_ERR(cell)) + return ERR_CAST(cell); + + ret = nvmem_cell_read(cell, &data); + nvmem_cell_put(cell); + + return ret; +} + +/* + * Use this function on devices where slope and offset calculations + * depend on calibration data read from qfprom. On others the slope + * and offset values are derived from tz->tzp->slope and tz->tzp->offset + * resp. + */ +void compute_intercept_slope(struct tsens_priv *priv, u32 *p1, + u32 *p2, u32 mode) +{ + int i; + int num, den; + + for (i = 0; i < priv->num_sensors; i++) { + dev_dbg(priv->dev, + "%s: sensor%d - data_point1:%#x data_point2:%#x\n", + __func__, i, p1[i], p2[i]); + + priv->sensor[i].slope = SLOPE_DEFAULT; + if (mode == TWO_PT_CALIB) { + /* + * slope (m) = adc_code2 - adc_code1 (y2 - y1)/ + * temp_120_degc - temp_30_degc (x2 - x1) + */ + num = p2[i] - p1[i]; + num *= SLOPE_FACTOR; + den = CAL_DEGC_PT2 - CAL_DEGC_PT1; + priv->sensor[i].slope = num / den; + } + + priv->sensor[i].offset = (p1[i] * SLOPE_FACTOR) - + (CAL_DEGC_PT1 * + priv->sensor[i].slope); + dev_dbg(priv->dev, "%s: offset:%d\n", __func__, + priv->sensor[i].offset); + } +} + +static inline u32 degc_to_code(int degc, const struct tsens_sensor *s) +{ + u64 code = div_u64(((u64)degc * s->slope + s->offset), SLOPE_FACTOR); + + pr_debug("%s: raw_code: 0x%llx, degc:%d\n", __func__, code, degc); + return clamp_val(code, THRESHOLD_MIN_ADC_CODE, THRESHOLD_MAX_ADC_CODE); +} + +static inline int code_to_degc(u32 adc_code, const struct tsens_sensor *s) +{ + int degc, num, den; + + num = (adc_code * SLOPE_FACTOR) - s->offset; + den = s->slope; + + if (num > 0) + degc = num + (den / 2); + else if (num < 0) + degc = num - (den / 2); + else + degc = num; + + degc /= den; + + return degc; +} + +/** + * tsens_hw_to_mC - Return sign-extended temperature in mCelsius. + * @s: Pointer to sensor struct + * @field: Index into regmap_field array pointing to temperature data + * + * This function handles temperature returned in ADC code or deciCelsius + * depending on IP version. + * + * Return: Temperature in milliCelsius on success, a negative errno will + * be returned in error cases + */ +static int tsens_hw_to_mC(const struct tsens_sensor *s, int field) +{ + struct tsens_priv *priv = s->priv; + u32 resolution; + u32 temp = 0; + int ret; + + resolution = priv->fields[LAST_TEMP_0].msb - + priv->fields[LAST_TEMP_0].lsb; + + ret = regmap_field_read(priv->rf[field], &temp); + if (ret) + return ret; + + /* Convert temperature from ADC code to milliCelsius */ + if (priv->feat->adc) + return code_to_degc(temp, s) * 1000; + + /* deciCelsius -> milliCelsius along with sign extension */ + return sign_extend32(temp, resolution) * 100; +} + +/** + * tsens_mC_to_hw - Convert temperature to hardware register value + * @s: Pointer to sensor struct + * @temp: temperature in milliCelsius to be programmed to hardware + * + * This function outputs the value to be written to hardware in ADC code + * or deciCelsius depending on IP version. + * + * Return: ADC code or temperature in deciCelsius. + */ +static int tsens_mC_to_hw(const struct tsens_sensor *s, int temp) +{ + struct tsens_priv *priv = s->priv; + + /* milliC to adc code */ + if (priv->feat->adc) + return degc_to_code(temp / 1000, s); + + /* milliC to deciC */ + return temp / 100; +} + +static inline enum tsens_ver tsens_version(struct tsens_priv *priv) +{ + return priv->feat->ver_major; +} + +static void tsens_set_interrupt_v1(struct tsens_priv *priv, u32 hw_id, + enum tsens_irq_type irq_type, bool enable) +{ + u32 index = 0; + + switch (irq_type) { + case UPPER: + index = UP_INT_CLEAR_0 + hw_id; + break; + case LOWER: + index = LOW_INT_CLEAR_0 + hw_id; + break; + case CRITICAL: + /* No critical interrupts before v2 */ + return; + } + regmap_field_write(priv->rf[index], enable ? 0 : 1); +} + +static void tsens_set_interrupt_v2(struct tsens_priv *priv, u32 hw_id, + enum tsens_irq_type irq_type, bool enable) +{ + u32 index_mask = 0, index_clear = 0; + + /* + * To enable the interrupt flag for a sensor: + * - clear the mask bit + * To disable the interrupt flag for a sensor: + * - Mask further interrupts for this sensor + * - Write 1 followed by 0 to clear the interrupt + */ + switch (irq_type) { + case UPPER: + index_mask = UP_INT_MASK_0 + hw_id; + index_clear = UP_INT_CLEAR_0 + hw_id; + break; + case LOWER: + index_mask = LOW_INT_MASK_0 + hw_id; + index_clear = LOW_INT_CLEAR_0 + hw_id; + break; + case CRITICAL: + index_mask = CRIT_INT_MASK_0 + hw_id; + index_clear = CRIT_INT_CLEAR_0 + hw_id; + break; + } + + if (enable) { + regmap_field_write(priv->rf[index_mask], 0); + } else { + regmap_field_write(priv->rf[index_mask], 1); + regmap_field_write(priv->rf[index_clear], 1); + regmap_field_write(priv->rf[index_clear], 0); + } +} + +/** + * tsens_set_interrupt - Set state of an interrupt + * @priv: Pointer to tsens controller private data + * @hw_id: Hardware ID aka. sensor number + * @irq_type: irq_type from enum tsens_irq_type + * @enable: false = disable, true = enable + * + * Call IP-specific function to set state of an interrupt + * + * Return: void + */ +static void tsens_set_interrupt(struct tsens_priv *priv, u32 hw_id, + enum tsens_irq_type irq_type, bool enable) +{ + dev_dbg(priv->dev, "[%u] %s: %s -> %s\n", hw_id, __func__, + irq_type ? ((irq_type == 1) ? "UP" : "CRITICAL") : "LOW", + enable ? "en" : "dis"); + if (tsens_version(priv) > VER_1_X) + tsens_set_interrupt_v2(priv, hw_id, irq_type, enable); + else + tsens_set_interrupt_v1(priv, hw_id, irq_type, enable); +} + +/** + * tsens_threshold_violated - Check if a sensor temperature violated a preset threshold + * @priv: Pointer to tsens controller private data + * @hw_id: Hardware ID aka. sensor number + * @d: Pointer to irq state data + * + * Return: 0 if threshold was not violated, 1 if it was violated and negative + * errno in case of errors + */ +static int tsens_threshold_violated(struct tsens_priv *priv, u32 hw_id, + struct tsens_irq_data *d) +{ + int ret; + + ret = regmap_field_read(priv->rf[UPPER_STATUS_0 + hw_id], &d->up_viol); + if (ret) + return ret; + ret = regmap_field_read(priv->rf[LOWER_STATUS_0 + hw_id], &d->low_viol); + if (ret) + return ret; + + if (priv->feat->crit_int) { + ret = regmap_field_read(priv->rf[CRITICAL_STATUS_0 + hw_id], + &d->crit_viol); + if (ret) + return ret; + } + + if (d->up_viol || d->low_viol || d->crit_viol) + return 1; + + return 0; +} + +static int tsens_read_irq_state(struct tsens_priv *priv, u32 hw_id, + const struct tsens_sensor *s, + struct tsens_irq_data *d) +{ + int ret; + + ret = regmap_field_read(priv->rf[UP_INT_CLEAR_0 + hw_id], &d->up_irq_clear); + if (ret) + return ret; + ret = regmap_field_read(priv->rf[LOW_INT_CLEAR_0 + hw_id], &d->low_irq_clear); + if (ret) + return ret; + if (tsens_version(priv) > VER_1_X) { + ret = regmap_field_read(priv->rf[UP_INT_MASK_0 + hw_id], &d->up_irq_mask); + if (ret) + return ret; + ret = regmap_field_read(priv->rf[LOW_INT_MASK_0 + hw_id], &d->low_irq_mask); + if (ret) + return ret; + ret = regmap_field_read(priv->rf[CRIT_INT_CLEAR_0 + hw_id], + &d->crit_irq_clear); + if (ret) + return ret; + ret = regmap_field_read(priv->rf[CRIT_INT_MASK_0 + hw_id], + &d->crit_irq_mask); + if (ret) + return ret; + + d->crit_thresh = tsens_hw_to_mC(s, CRIT_THRESH_0 + hw_id); + } else { + /* No mask register on older TSENS */ + d->up_irq_mask = 0; + d->low_irq_mask = 0; + d->crit_irq_clear = 0; + d->crit_irq_mask = 0; + d->crit_thresh = 0; + } + + d->up_thresh = tsens_hw_to_mC(s, UP_THRESH_0 + hw_id); + d->low_thresh = tsens_hw_to_mC(s, LOW_THRESH_0 + hw_id); + + dev_dbg(priv->dev, "[%u] %s%s: status(%u|%u|%u) | clr(%u|%u|%u) | mask(%u|%u|%u)\n", + hw_id, __func__, + (d->up_viol || d->low_viol || d->crit_viol) ? "(V)" : "", + d->low_viol, d->up_viol, d->crit_viol, + d->low_irq_clear, d->up_irq_clear, d->crit_irq_clear, + d->low_irq_mask, d->up_irq_mask, d->crit_irq_mask); + dev_dbg(priv->dev, "[%u] %s%s: thresh: (%d:%d:%d)\n", hw_id, __func__, + (d->up_viol || d->low_viol || d->crit_viol) ? "(V)" : "", + d->low_thresh, d->up_thresh, d->crit_thresh); + + return 0; +} + +static inline u32 masked_irq(u32 hw_id, u32 mask, enum tsens_ver ver) +{ + if (ver > VER_1_X) + return mask & (1 << hw_id); + + /* v1, v0.1 don't have a irq mask register */ + return 0; +} + +/** + * tsens_critical_irq_thread() - Threaded handler for critical interrupts + * @irq: irq number + * @data: tsens controller private data + * + * Check FSM watchdog bark status and clear if needed. + * Check all sensors to find ones that violated their critical threshold limits. + * Clear and then re-enable the interrupt. + * + * The level-triggered interrupt might deassert if the temperature returned to + * within the threshold limits by the time the handler got scheduled. We + * consider the irq to have been handled in that case. + * + * Return: IRQ_HANDLED + */ +static irqreturn_t tsens_critical_irq_thread(int irq, void *data) +{ + struct tsens_priv *priv = data; + struct tsens_irq_data d; + int temp, ret, i; + u32 wdog_status, wdog_count; + + if (priv->feat->has_watchdog) { + ret = regmap_field_read(priv->rf[WDOG_BARK_STATUS], + &wdog_status); + if (ret) + return ret; + + if (wdog_status) { + /* Clear WDOG interrupt */ + regmap_field_write(priv->rf[WDOG_BARK_CLEAR], 1); + regmap_field_write(priv->rf[WDOG_BARK_CLEAR], 0); + ret = regmap_field_read(priv->rf[WDOG_BARK_COUNT], + &wdog_count); + if (ret) + return ret; + if (wdog_count) + dev_dbg(priv->dev, "%s: watchdog count: %d\n", + __func__, wdog_count); + + /* Fall through to handle critical interrupts if any */ + } + } + + for (i = 0; i < priv->num_sensors; i++) { + const struct tsens_sensor *s = &priv->sensor[i]; + u32 hw_id = s->hw_id; + + if (!s->tzd) + continue; + if (!tsens_threshold_violated(priv, hw_id, &d)) + continue; + ret = get_temp_tsens_valid(s, &temp); + if (ret) { + dev_err(priv->dev, "[%u] %s: error reading sensor\n", + hw_id, __func__); + continue; + } + + tsens_read_irq_state(priv, hw_id, s, &d); + if (d.crit_viol && + !masked_irq(hw_id, d.crit_irq_mask, tsens_version(priv))) { + /* Mask critical interrupts, unused on Linux */ + tsens_set_interrupt(priv, hw_id, CRITICAL, false); + } + } + + return IRQ_HANDLED; +} + +/** + * tsens_irq_thread - Threaded interrupt handler for uplow interrupts + * @irq: irq number + * @data: tsens controller private data + * + * Check all sensors to find ones that violated their threshold limits. If the + * temperature is still outside the limits, call thermal_zone_device_update() to + * update the thresholds, else re-enable the interrupts. + * + * The level-triggered interrupt might deassert if the temperature returned to + * within the threshold limits by the time the handler got scheduled. We + * consider the irq to have been handled in that case. + * + * Return: IRQ_HANDLED + */ +static irqreturn_t tsens_irq_thread(int irq, void *data) +{ + struct tsens_priv *priv = data; + struct tsens_irq_data d; + bool enable = true, disable = false; + unsigned long flags; + int temp, ret, i; + + for (i = 0; i < priv->num_sensors; i++) { + bool trigger = false; + const struct tsens_sensor *s = &priv->sensor[i]; + u32 hw_id = s->hw_id; + + if (!s->tzd) + continue; + if (!tsens_threshold_violated(priv, hw_id, &d)) + continue; + ret = get_temp_tsens_valid(s, &temp); + if (ret) { + dev_err(priv->dev, "[%u] %s: error reading sensor\n", + hw_id, __func__); + continue; + } + + spin_lock_irqsave(&priv->ul_lock, flags); + + tsens_read_irq_state(priv, hw_id, s, &d); + + if (d.up_viol && + !masked_irq(hw_id, d.up_irq_mask, tsens_version(priv))) { + tsens_set_interrupt(priv, hw_id, UPPER, disable); + if (d.up_thresh > temp) { + dev_dbg(priv->dev, "[%u] %s: re-arm upper\n", + hw_id, __func__); + tsens_set_interrupt(priv, hw_id, UPPER, enable); + } else { + trigger = true; + /* Keep irq masked */ + } + } else if (d.low_viol && + !masked_irq(hw_id, d.low_irq_mask, tsens_version(priv))) { + tsens_set_interrupt(priv, hw_id, LOWER, disable); + if (d.low_thresh < temp) { + dev_dbg(priv->dev, "[%u] %s: re-arm low\n", + hw_id, __func__); + tsens_set_interrupt(priv, hw_id, LOWER, enable); + } else { + trigger = true; + /* Keep irq masked */ + } + } + + spin_unlock_irqrestore(&priv->ul_lock, flags); + + if (trigger) { + dev_dbg(priv->dev, "[%u] %s: TZ update trigger (%d mC)\n", + hw_id, __func__, temp); + thermal_zone_device_update(s->tzd, + THERMAL_EVENT_UNSPECIFIED); + } else { + dev_dbg(priv->dev, "[%u] %s: no violation: %d\n", + hw_id, __func__, temp); + } + } + + return IRQ_HANDLED; +} + +static int tsens_set_trips(void *_sensor, int low, int high) +{ + struct tsens_sensor *s = _sensor; + struct tsens_priv *priv = s->priv; + struct device *dev = priv->dev; + struct tsens_irq_data d; + unsigned long flags; + int high_val, low_val, cl_high, cl_low; + u32 hw_id = s->hw_id; + + dev_dbg(dev, "[%u] %s: proposed thresholds: (%d:%d)\n", + hw_id, __func__, low, high); + + cl_high = clamp_val(high, -40000, 120000); + cl_low = clamp_val(low, -40000, 120000); + + high_val = tsens_mC_to_hw(s, cl_high); + low_val = tsens_mC_to_hw(s, cl_low); + + spin_lock_irqsave(&priv->ul_lock, flags); + + tsens_read_irq_state(priv, hw_id, s, &d); + + /* Write the new thresholds and clear the status */ + regmap_field_write(priv->rf[LOW_THRESH_0 + hw_id], low_val); + regmap_field_write(priv->rf[UP_THRESH_0 + hw_id], high_val); + tsens_set_interrupt(priv, hw_id, LOWER, true); + tsens_set_interrupt(priv, hw_id, UPPER, true); + + spin_unlock_irqrestore(&priv->ul_lock, flags); + + dev_dbg(dev, "[%u] %s: (%d:%d)->(%d:%d)\n", + hw_id, __func__, d.low_thresh, d.up_thresh, cl_low, cl_high); + + return 0; +} + +static int tsens_enable_irq(struct tsens_priv *priv) +{ + int ret; + int val = tsens_version(priv) > VER_1_X ? 7 : 1; + + ret = regmap_field_write(priv->rf[INT_EN], val); + if (ret < 0) + dev_err(priv->dev, "%s: failed to enable interrupts\n", + __func__); + + return ret; +} + +static void tsens_disable_irq(struct tsens_priv *priv) +{ + regmap_field_write(priv->rf[INT_EN], 0); +} + +int get_temp_tsens_valid(const struct tsens_sensor *s, int *temp) +{ + struct tsens_priv *priv = s->priv; + int hw_id = s->hw_id; + u32 temp_idx = LAST_TEMP_0 + hw_id; + u32 valid_idx = VALID_0 + hw_id; + u32 valid; + int ret; + + ret = regmap_field_read(priv->rf[valid_idx], &valid); + if (ret) + return ret; + while (!valid) { + /* Valid bit is 0 for 6 AHB clock cycles. + * At 19.2MHz, 1 AHB clock is ~60ns. + * We should enter this loop very, very rarely. + */ + ndelay(400); + ret = regmap_field_read(priv->rf[valid_idx], &valid); + if (ret) + return ret; + } + + /* Valid bit is set, OK to read the temperature */ + *temp = tsens_hw_to_mC(s, temp_idx); + + return 0; +} + +int get_temp_common(const struct tsens_sensor *s, int *temp) +{ + struct tsens_priv *priv = s->priv; + int hw_id = s->hw_id; + int last_temp = 0, ret; + + ret = regmap_field_read(priv->rf[LAST_TEMP_0 + hw_id], &last_temp); + if (ret) + return ret; + + *temp = code_to_degc(last_temp, s) * 1000; + + return 0; +} + +#ifdef CONFIG_DEBUG_FS +static int dbg_sensors_show(struct seq_file *s, void *data) +{ + struct platform_device *pdev = s->private; + struct tsens_priv *priv = platform_get_drvdata(pdev); + int i; + + seq_printf(s, "max: %2d\nnum: %2d\n\n", + priv->feat->max_sensors, priv->num_sensors); + + seq_puts(s, " id slope offset\n--------------------------\n"); + for (i = 0; i < priv->num_sensors; i++) { + seq_printf(s, "%8d %8d %8d\n", priv->sensor[i].hw_id, + priv->sensor[i].slope, priv->sensor[i].offset); + } + + return 0; +} + +static int dbg_version_show(struct seq_file *s, void *data) +{ + struct platform_device *pdev = s->private; + struct tsens_priv *priv = platform_get_drvdata(pdev); + u32 maj_ver, min_ver, step_ver; + int ret; + + if (tsens_version(priv) > VER_0_1) { + ret = regmap_field_read(priv->rf[VER_MAJOR], &maj_ver); + if (ret) + return ret; + ret = regmap_field_read(priv->rf[VER_MINOR], &min_ver); + if (ret) + return ret; + ret = regmap_field_read(priv->rf[VER_STEP], &step_ver); + if (ret) + return ret; + seq_printf(s, "%d.%d.%d\n", maj_ver, min_ver, step_ver); + } else { + seq_puts(s, "0.1.0\n"); + } + + return 0; +} + +DEFINE_SHOW_ATTRIBUTE(dbg_version); +DEFINE_SHOW_ATTRIBUTE(dbg_sensors); + +static void tsens_debug_init(struct platform_device *pdev) +{ + struct tsens_priv *priv = platform_get_drvdata(pdev); + struct dentry *root, *file; + + root = debugfs_lookup("tsens", NULL); + if (!root) + priv->debug_root = debugfs_create_dir("tsens", NULL); + else + priv->debug_root = root; + + file = debugfs_lookup("version", priv->debug_root); + if (!file) + debugfs_create_file("version", 0444, priv->debug_root, + pdev, &dbg_version_fops); + + /* A directory for each instance of the TSENS IP */ + priv->debug = debugfs_create_dir(dev_name(&pdev->dev), priv->debug_root); + debugfs_create_file("sensors", 0444, priv->debug, pdev, &dbg_sensors_fops); +} +#else +static inline void tsens_debug_init(struct platform_device *pdev) {} +#endif + +static const struct regmap_config tsens_config = { + .name = "tm", + .reg_bits = 32, + .val_bits = 32, + .reg_stride = 4, +}; + +static const struct regmap_config tsens_srot_config = { + .name = "srot", + .reg_bits = 32, + .val_bits = 32, + .reg_stride = 4, +}; + +int __init init_common(struct tsens_priv *priv) +{ + void __iomem *tm_base, *srot_base; + struct device *dev = priv->dev; + u32 ver_minor; + struct resource *res; + u32 enabled; + int ret, i, j; + struct platform_device *op = of_find_device_by_node(priv->dev->of_node); + + if (!op) + return -EINVAL; + + if (op->num_resources > 1) { + /* DT with separate SROT and TM address space */ + priv->tm_offset = 0; + res = platform_get_resource(op, IORESOURCE_MEM, 1); + srot_base = devm_ioremap_resource(dev, res); + if (IS_ERR(srot_base)) { + ret = PTR_ERR(srot_base); + goto err_put_device; + } + + priv->srot_map = devm_regmap_init_mmio(dev, srot_base, + &tsens_srot_config); + if (IS_ERR(priv->srot_map)) { + ret = PTR_ERR(priv->srot_map); + goto err_put_device; + } + } else { + /* old DTs where SROT and TM were in a contiguous 2K block */ + priv->tm_offset = 0x1000; + } + + res = platform_get_resource(op, IORESOURCE_MEM, 0); + tm_base = devm_ioremap_resource(dev, res); + if (IS_ERR(tm_base)) { + ret = PTR_ERR(tm_base); + goto err_put_device; + } + + priv->tm_map = devm_regmap_init_mmio(dev, tm_base, &tsens_config); + if (IS_ERR(priv->tm_map)) { + ret = PTR_ERR(priv->tm_map); + goto err_put_device; + } + + if (tsens_version(priv) > VER_0_1) { + for (i = VER_MAJOR; i <= VER_STEP; i++) { + priv->rf[i] = devm_regmap_field_alloc(dev, priv->srot_map, + priv->fields[i]); + if (IS_ERR(priv->rf[i])) { + ret = PTR_ERR(priv->rf[i]); + goto err_put_device; + } + } + ret = regmap_field_read(priv->rf[VER_MINOR], &ver_minor); + if (ret) + goto err_put_device; + } + + priv->rf[TSENS_EN] = devm_regmap_field_alloc(dev, priv->srot_map, + priv->fields[TSENS_EN]); + if (IS_ERR(priv->rf[TSENS_EN])) { + ret = PTR_ERR(priv->rf[TSENS_EN]); + goto err_put_device; + } + ret = regmap_field_read(priv->rf[TSENS_EN], &enabled); + if (ret) + goto err_put_device; + if (!enabled) { + dev_err(dev, "%s: device not enabled\n", __func__); + ret = -ENODEV; + goto err_put_device; + } + + priv->rf[SENSOR_EN] = devm_regmap_field_alloc(dev, priv->srot_map, + priv->fields[SENSOR_EN]); + if (IS_ERR(priv->rf[SENSOR_EN])) { + ret = PTR_ERR(priv->rf[SENSOR_EN]); + goto err_put_device; + } + priv->rf[INT_EN] = devm_regmap_field_alloc(dev, priv->tm_map, + priv->fields[INT_EN]); + if (IS_ERR(priv->rf[INT_EN])) { + ret = PTR_ERR(priv->rf[INT_EN]); + goto err_put_device; + } + + /* This loop might need changes if enum regfield_ids is reordered */ + for (j = LAST_TEMP_0; j <= UP_THRESH_15; j += 16) { + for (i = 0; i < priv->feat->max_sensors; i++) { + int idx = j + i; + + priv->rf[idx] = devm_regmap_field_alloc(dev, + priv->tm_map, + priv->fields[idx]); + if (IS_ERR(priv->rf[idx])) { + ret = PTR_ERR(priv->rf[idx]); + goto err_put_device; + } + } + } + + if (priv->feat->crit_int) { + /* Loop might need changes if enum regfield_ids is reordered */ + for (j = CRITICAL_STATUS_0; j <= CRIT_THRESH_15; j += 16) { + for (i = 0; i < priv->feat->max_sensors; i++) { + int idx = j + i; + + priv->rf[idx] = + devm_regmap_field_alloc(dev, + priv->tm_map, + priv->fields[idx]); + if (IS_ERR(priv->rf[idx])) { + ret = PTR_ERR(priv->rf[idx]); + goto err_put_device; + } + } + } + } + + if (tsens_version(priv) > VER_1_X && ver_minor > 2) { + /* Watchdog is present only on v2.3+ */ + priv->feat->has_watchdog = 1; + for (i = WDOG_BARK_STATUS; i <= CC_MON_MASK; i++) { + priv->rf[i] = devm_regmap_field_alloc(dev, priv->tm_map, + priv->fields[i]); + if (IS_ERR(priv->rf[i])) { + ret = PTR_ERR(priv->rf[i]); + goto err_put_device; + } + } + /* + * Watchdog is already enabled, unmask the bark. + * Disable cycle completion monitoring + */ + regmap_field_write(priv->rf[WDOG_BARK_MASK], 0); + regmap_field_write(priv->rf[CC_MON_MASK], 1); + } + + spin_lock_init(&priv->ul_lock); + tsens_enable_irq(priv); + tsens_debug_init(op); + +err_put_device: + put_device(&op->dev); + return ret; +} + +static int tsens_get_temp(void *data, int *temp) +{ + struct tsens_sensor *s = data; + struct tsens_priv *priv = s->priv; + + return priv->ops->get_temp(s, temp); +} + +static int tsens_get_trend(void *data, int trip, enum thermal_trend *trend) +{ + struct tsens_sensor *s = data; + struct tsens_priv *priv = s->priv; + + if (priv->ops->get_trend) + return priv->ops->get_trend(s, trend); + + return -ENOTSUPP; +} + +static int __maybe_unused tsens_suspend(struct device *dev) +{ + struct tsens_priv *priv = dev_get_drvdata(dev); + + if (priv->ops && priv->ops->suspend) + return priv->ops->suspend(priv); + + return 0; +} + +static int __maybe_unused tsens_resume(struct device *dev) +{ + struct tsens_priv *priv = dev_get_drvdata(dev); + + if (priv->ops && priv->ops->resume) + return priv->ops->resume(priv); + + return 0; +} + +static SIMPLE_DEV_PM_OPS(tsens_pm_ops, tsens_suspend, tsens_resume); + +static const struct of_device_id tsens_table[] = { + { + .compatible = "qcom,msm8916-tsens", + .data = &data_8916, + }, { + .compatible = "qcom,msm8939-tsens", + .data = &data_8939, + }, { + .compatible = "qcom,msm8956-tsens", + .data = &data_8956, + }, { + .compatible = "qcom,msm8960-tsens", + .data = &data_8960, + }, { + .compatible = "qcom,msm8974-tsens", + .data = &data_8974, + }, { + .compatible = "qcom,msm8976-tsens", + .data = &data_8976, + }, { + .compatible = "qcom,msm8996-tsens", + .data = &data_8996, + }, { + .compatible = "qcom,tsens-v1", + .data = &data_tsens_v1, + }, { + .compatible = "qcom,tsens-v2", + .data = &data_tsens_v2, + }, + {} +}; +MODULE_DEVICE_TABLE(of, tsens_table); + +static const struct thermal_zone_of_device_ops tsens_of_ops = { + .get_temp = tsens_get_temp, + .get_trend = tsens_get_trend, + .set_trips = tsens_set_trips, +}; + +static int tsens_register_irq(struct tsens_priv *priv, char *irqname, + irq_handler_t thread_fn) +{ + struct platform_device *pdev; + int ret, irq; + + pdev = of_find_device_by_node(priv->dev->of_node); + if (!pdev) + return -ENODEV; + + irq = platform_get_irq_byname(pdev, irqname); + if (irq < 0) { + ret = irq; + /* For old DTs with no IRQ defined */ + if (irq == -ENXIO) + ret = 0; + } else { + ret = devm_request_threaded_irq(&pdev->dev, irq, + NULL, thread_fn, + IRQF_ONESHOT, + dev_name(&pdev->dev), priv); + if (ret) + dev_err(&pdev->dev, "%s: failed to get irq\n", + __func__); + else + enable_irq_wake(irq); + } + + put_device(&pdev->dev); + return ret; +} + +static int tsens_register(struct tsens_priv *priv) +{ + int i, ret; + struct thermal_zone_device *tzd; + + for (i = 0; i < priv->num_sensors; i++) { + priv->sensor[i].priv = priv; + tzd = devm_thermal_zone_of_sensor_register(priv->dev, priv->sensor[i].hw_id, + &priv->sensor[i], + &tsens_of_ops); + if (IS_ERR(tzd)) + continue; + priv->sensor[i].tzd = tzd; + if (priv->ops->enable) + priv->ops->enable(priv, i); + } + + ret = tsens_register_irq(priv, "uplow", tsens_irq_thread); + if (ret < 0) + return ret; + + if (priv->feat->crit_int) + ret = tsens_register_irq(priv, "critical", + tsens_critical_irq_thread); + + return ret; +} + +static int tsens_probe(struct platform_device *pdev) +{ + int ret, i; + struct device *dev; + struct device_node *np; + struct tsens_priv *priv; + const struct tsens_plat_data *data; + const struct of_device_id *id; + u32 num_sensors; + + if (pdev->dev.of_node) + dev = &pdev->dev; + else + dev = pdev->dev.parent; + + np = dev->of_node; + + id = of_match_node(tsens_table, np); + if (id) + data = id->data; + else + data = &data_8960; + + num_sensors = data->num_sensors; + + if (np) + of_property_read_u32(np, "#qcom,sensors", &num_sensors); + + if (num_sensors <= 0) { + dev_err(dev, "%s: invalid number of sensors\n", __func__); + return -EINVAL; + } + + priv = devm_kzalloc(dev, + struct_size(priv, sensor, num_sensors), + GFP_KERNEL); + if (!priv) + return -ENOMEM; + + priv->dev = dev; + priv->num_sensors = num_sensors; + priv->ops = data->ops; + for (i = 0; i < priv->num_sensors; i++) { + if (data->hw_ids) + priv->sensor[i].hw_id = data->hw_ids[i]; + else + priv->sensor[i].hw_id = i; + } + priv->feat = data->feat; + priv->fields = data->fields; + + platform_set_drvdata(pdev, priv); + + if (!priv->ops || !priv->ops->init || !priv->ops->get_temp) + return -EINVAL; + + ret = priv->ops->init(priv); + if (ret < 0) { + dev_err(dev, "%s: init failed\n", __func__); + return ret; + } + + if (priv->ops->calibrate) { + ret = priv->ops->calibrate(priv); + if (ret < 0) { + if (ret != -EPROBE_DEFER) + dev_err(dev, "%s: calibration failed\n", __func__); + return ret; + } + } + + return tsens_register(priv); +} + +static int tsens_remove(struct platform_device *pdev) +{ + struct tsens_priv *priv = platform_get_drvdata(pdev); + + debugfs_remove_recursive(priv->debug_root); + tsens_disable_irq(priv); + if (priv->ops->disable) + priv->ops->disable(priv); + + return 0; +} + +static struct platform_driver tsens_driver = { + .probe = tsens_probe, + .remove = tsens_remove, + .driver = { + .name = "qcom-tsens", + .pm = &tsens_pm_ops, + .of_match_table = tsens_table, + }, +}; +module_platform_driver(tsens_driver); + +MODULE_LICENSE("GPL v2"); +MODULE_DESCRIPTION("QCOM Temperature Sensor driver"); +MODULE_ALIAS("platform:qcom-tsens"); diff --git a/drivers/thermal/qcom/tsens.h b/drivers/thermal/qcom/tsens.h new file mode 100644 index 000000000..bbb1e8332 --- /dev/null +++ b/drivers/thermal/qcom/tsens.h @@ -0,0 +1,596 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (c) 2015, The Linux Foundation. All rights reserved. + */ + +#ifndef __QCOM_TSENS_H__ +#define __QCOM_TSENS_H__ + +#define ONE_PT_CALIB 0x1 +#define ONE_PT_CALIB2 0x2 +#define TWO_PT_CALIB 0x3 +#define CAL_DEGC_PT1 30 +#define CAL_DEGC_PT2 120 +#define SLOPE_FACTOR 1000 +#define SLOPE_DEFAULT 3200 +#define THRESHOLD_MAX_ADC_CODE 0x3ff +#define THRESHOLD_MIN_ADC_CODE 0x0 + +#include <linux/interrupt.h> +#include <linux/thermal.h> +#include <linux/regmap.h> +#include <linux/slab.h> + +struct tsens_priv; + +/* IP version numbers in ascending order */ +enum tsens_ver { + VER_0_1 = 0, + VER_1_X, + VER_2_X, +}; + +enum tsens_irq_type { + LOWER, + UPPER, + CRITICAL, +}; + +/** + * struct tsens_sensor - data for each sensor connected to the tsens device + * @priv: tsens device instance that this sensor is connected to + * @tzd: pointer to the thermal zone that this sensor is in + * @offset: offset of temperature adjustment curve + * @hw_id: HW ID can be used in case of platform-specific IDs + * @slope: slope of temperature adjustment curve + * @status: 8960-specific variable to track 8960 and 8660 status register offset + */ +struct tsens_sensor { + struct tsens_priv *priv; + struct thermal_zone_device *tzd; + int offset; + unsigned int hw_id; + int slope; + u32 status; +}; + +/** + * struct tsens_ops - operations as supported by the tsens device + * @init: Function to initialize the tsens device + * @calibrate: Function to calibrate the tsens device + * @get_temp: Function which returns the temp in millidegC + * @enable: Function to enable (clocks/power) tsens device + * @disable: Function to disable the tsens device + * @suspend: Function to suspend the tsens device + * @resume: Function to resume the tsens device + * @get_trend: Function to get the thermal/temp trend + */ +struct tsens_ops { + /* mandatory callbacks */ + int (*init)(struct tsens_priv *priv); + int (*calibrate)(struct tsens_priv *priv); + int (*get_temp)(const struct tsens_sensor *s, int *temp); + /* optional callbacks */ + int (*enable)(struct tsens_priv *priv, int i); + void (*disable)(struct tsens_priv *priv); + int (*suspend)(struct tsens_priv *priv); + int (*resume)(struct tsens_priv *priv); + int (*get_trend)(struct tsens_sensor *s, enum thermal_trend *trend); +}; + +#define REG_FIELD_FOR_EACH_SENSOR11(_name, _offset, _startbit, _stopbit) \ + [_name##_##0] = REG_FIELD(_offset, _startbit, _stopbit), \ + [_name##_##1] = REG_FIELD(_offset + 4, _startbit, _stopbit), \ + [_name##_##2] = REG_FIELD(_offset + 8, _startbit, _stopbit), \ + [_name##_##3] = REG_FIELD(_offset + 12, _startbit, _stopbit), \ + [_name##_##4] = REG_FIELD(_offset + 16, _startbit, _stopbit), \ + [_name##_##5] = REG_FIELD(_offset + 20, _startbit, _stopbit), \ + [_name##_##6] = REG_FIELD(_offset + 24, _startbit, _stopbit), \ + [_name##_##7] = REG_FIELD(_offset + 28, _startbit, _stopbit), \ + [_name##_##8] = REG_FIELD(_offset + 32, _startbit, _stopbit), \ + [_name##_##9] = REG_FIELD(_offset + 36, _startbit, _stopbit), \ + [_name##_##10] = REG_FIELD(_offset + 40, _startbit, _stopbit) + +#define REG_FIELD_FOR_EACH_SENSOR16(_name, _offset, _startbit, _stopbit) \ + [_name##_##0] = REG_FIELD(_offset, _startbit, _stopbit), \ + [_name##_##1] = REG_FIELD(_offset + 4, _startbit, _stopbit), \ + [_name##_##2] = REG_FIELD(_offset + 8, _startbit, _stopbit), \ + [_name##_##3] = REG_FIELD(_offset + 12, _startbit, _stopbit), \ + [_name##_##4] = REG_FIELD(_offset + 16, _startbit, _stopbit), \ + [_name##_##5] = REG_FIELD(_offset + 20, _startbit, _stopbit), \ + [_name##_##6] = REG_FIELD(_offset + 24, _startbit, _stopbit), \ + [_name##_##7] = REG_FIELD(_offset + 28, _startbit, _stopbit), \ + [_name##_##8] = REG_FIELD(_offset + 32, _startbit, _stopbit), \ + [_name##_##9] = REG_FIELD(_offset + 36, _startbit, _stopbit), \ + [_name##_##10] = REG_FIELD(_offset + 40, _startbit, _stopbit), \ + [_name##_##11] = REG_FIELD(_offset + 44, _startbit, _stopbit), \ + [_name##_##12] = REG_FIELD(_offset + 48, _startbit, _stopbit), \ + [_name##_##13] = REG_FIELD(_offset + 52, _startbit, _stopbit), \ + [_name##_##14] = REG_FIELD(_offset + 56, _startbit, _stopbit), \ + [_name##_##15] = REG_FIELD(_offset + 60, _startbit, _stopbit) + +#define REG_FIELD_SPLIT_BITS_0_15(_name, _offset) \ + [_name##_##0] = REG_FIELD(_offset, 0, 0), \ + [_name##_##1] = REG_FIELD(_offset, 1, 1), \ + [_name##_##2] = REG_FIELD(_offset, 2, 2), \ + [_name##_##3] = REG_FIELD(_offset, 3, 3), \ + [_name##_##4] = REG_FIELD(_offset, 4, 4), \ + [_name##_##5] = REG_FIELD(_offset, 5, 5), \ + [_name##_##6] = REG_FIELD(_offset, 6, 6), \ + [_name##_##7] = REG_FIELD(_offset, 7, 7), \ + [_name##_##8] = REG_FIELD(_offset, 8, 8), \ + [_name##_##9] = REG_FIELD(_offset, 9, 9), \ + [_name##_##10] = REG_FIELD(_offset, 10, 10), \ + [_name##_##11] = REG_FIELD(_offset, 11, 11), \ + [_name##_##12] = REG_FIELD(_offset, 12, 12), \ + [_name##_##13] = REG_FIELD(_offset, 13, 13), \ + [_name##_##14] = REG_FIELD(_offset, 14, 14), \ + [_name##_##15] = REG_FIELD(_offset, 15, 15) + +#define REG_FIELD_SPLIT_BITS_16_31(_name, _offset) \ + [_name##_##0] = REG_FIELD(_offset, 16, 16), \ + [_name##_##1] = REG_FIELD(_offset, 17, 17), \ + [_name##_##2] = REG_FIELD(_offset, 18, 18), \ + [_name##_##3] = REG_FIELD(_offset, 19, 19), \ + [_name##_##4] = REG_FIELD(_offset, 20, 20), \ + [_name##_##5] = REG_FIELD(_offset, 21, 21), \ + [_name##_##6] = REG_FIELD(_offset, 22, 22), \ + [_name##_##7] = REG_FIELD(_offset, 23, 23), \ + [_name##_##8] = REG_FIELD(_offset, 24, 24), \ + [_name##_##9] = REG_FIELD(_offset, 25, 25), \ + [_name##_##10] = REG_FIELD(_offset, 26, 26), \ + [_name##_##11] = REG_FIELD(_offset, 27, 27), \ + [_name##_##12] = REG_FIELD(_offset, 28, 28), \ + [_name##_##13] = REG_FIELD(_offset, 29, 29), \ + [_name##_##14] = REG_FIELD(_offset, 30, 30), \ + [_name##_##15] = REG_FIELD(_offset, 31, 31) + +/* + * reg_field IDs to use as an index into an array + * If you change the order of the entries, check the devm_regmap_field_alloc() + * calls in init_common() + */ +enum regfield_ids { + /* ----- SROT ------ */ + /* HW_VER */ + VER_MAJOR, + VER_MINOR, + VER_STEP, + /* CTRL_OFFSET */ + TSENS_EN, + TSENS_SW_RST, + SENSOR_EN, + CODE_OR_TEMP, + + /* ----- TM ------ */ + /* TRDY */ + TRDY, + /* INTERRUPT ENABLE */ + INT_EN, /* v2+ has separate enables for crit, upper and lower irq */ + /* STATUS */ + LAST_TEMP_0, /* Last temperature reading */ + LAST_TEMP_1, + LAST_TEMP_2, + LAST_TEMP_3, + LAST_TEMP_4, + LAST_TEMP_5, + LAST_TEMP_6, + LAST_TEMP_7, + LAST_TEMP_8, + LAST_TEMP_9, + LAST_TEMP_10, + LAST_TEMP_11, + LAST_TEMP_12, + LAST_TEMP_13, + LAST_TEMP_14, + LAST_TEMP_15, + VALID_0, /* VALID reading or not */ + VALID_1, + VALID_2, + VALID_3, + VALID_4, + VALID_5, + VALID_6, + VALID_7, + VALID_8, + VALID_9, + VALID_10, + VALID_11, + VALID_12, + VALID_13, + VALID_14, + VALID_15, + LOWER_STATUS_0, /* LOWER threshold violated */ + LOWER_STATUS_1, + LOWER_STATUS_2, + LOWER_STATUS_3, + LOWER_STATUS_4, + LOWER_STATUS_5, + LOWER_STATUS_6, + LOWER_STATUS_7, + LOWER_STATUS_8, + LOWER_STATUS_9, + LOWER_STATUS_10, + LOWER_STATUS_11, + LOWER_STATUS_12, + LOWER_STATUS_13, + LOWER_STATUS_14, + LOWER_STATUS_15, + LOW_INT_STATUS_0, /* LOWER interrupt status */ + LOW_INT_STATUS_1, + LOW_INT_STATUS_2, + LOW_INT_STATUS_3, + LOW_INT_STATUS_4, + LOW_INT_STATUS_5, + LOW_INT_STATUS_6, + LOW_INT_STATUS_7, + LOW_INT_STATUS_8, + LOW_INT_STATUS_9, + LOW_INT_STATUS_10, + LOW_INT_STATUS_11, + LOW_INT_STATUS_12, + LOW_INT_STATUS_13, + LOW_INT_STATUS_14, + LOW_INT_STATUS_15, + LOW_INT_CLEAR_0, /* LOWER interrupt clear */ + LOW_INT_CLEAR_1, + LOW_INT_CLEAR_2, + LOW_INT_CLEAR_3, + LOW_INT_CLEAR_4, + LOW_INT_CLEAR_5, + LOW_INT_CLEAR_6, + LOW_INT_CLEAR_7, + LOW_INT_CLEAR_8, + LOW_INT_CLEAR_9, + LOW_INT_CLEAR_10, + LOW_INT_CLEAR_11, + LOW_INT_CLEAR_12, + LOW_INT_CLEAR_13, + LOW_INT_CLEAR_14, + LOW_INT_CLEAR_15, + LOW_INT_MASK_0, /* LOWER interrupt mask */ + LOW_INT_MASK_1, + LOW_INT_MASK_2, + LOW_INT_MASK_3, + LOW_INT_MASK_4, + LOW_INT_MASK_5, + LOW_INT_MASK_6, + LOW_INT_MASK_7, + LOW_INT_MASK_8, + LOW_INT_MASK_9, + LOW_INT_MASK_10, + LOW_INT_MASK_11, + LOW_INT_MASK_12, + LOW_INT_MASK_13, + LOW_INT_MASK_14, + LOW_INT_MASK_15, + LOW_THRESH_0, /* LOWER threshold values */ + LOW_THRESH_1, + LOW_THRESH_2, + LOW_THRESH_3, + LOW_THRESH_4, + LOW_THRESH_5, + LOW_THRESH_6, + LOW_THRESH_7, + LOW_THRESH_8, + LOW_THRESH_9, + LOW_THRESH_10, + LOW_THRESH_11, + LOW_THRESH_12, + LOW_THRESH_13, + LOW_THRESH_14, + LOW_THRESH_15, + UPPER_STATUS_0, /* UPPER threshold violated */ + UPPER_STATUS_1, + UPPER_STATUS_2, + UPPER_STATUS_3, + UPPER_STATUS_4, + UPPER_STATUS_5, + UPPER_STATUS_6, + UPPER_STATUS_7, + UPPER_STATUS_8, + UPPER_STATUS_9, + UPPER_STATUS_10, + UPPER_STATUS_11, + UPPER_STATUS_12, + UPPER_STATUS_13, + UPPER_STATUS_14, + UPPER_STATUS_15, + UP_INT_STATUS_0, /* UPPER interrupt status */ + UP_INT_STATUS_1, + UP_INT_STATUS_2, + UP_INT_STATUS_3, + UP_INT_STATUS_4, + UP_INT_STATUS_5, + UP_INT_STATUS_6, + UP_INT_STATUS_7, + UP_INT_STATUS_8, + UP_INT_STATUS_9, + UP_INT_STATUS_10, + UP_INT_STATUS_11, + UP_INT_STATUS_12, + UP_INT_STATUS_13, + UP_INT_STATUS_14, + UP_INT_STATUS_15, + UP_INT_CLEAR_0, /* UPPER interrupt clear */ + UP_INT_CLEAR_1, + UP_INT_CLEAR_2, + UP_INT_CLEAR_3, + UP_INT_CLEAR_4, + UP_INT_CLEAR_5, + UP_INT_CLEAR_6, + UP_INT_CLEAR_7, + UP_INT_CLEAR_8, + UP_INT_CLEAR_9, + UP_INT_CLEAR_10, + UP_INT_CLEAR_11, + UP_INT_CLEAR_12, + UP_INT_CLEAR_13, + UP_INT_CLEAR_14, + UP_INT_CLEAR_15, + UP_INT_MASK_0, /* UPPER interrupt mask */ + UP_INT_MASK_1, + UP_INT_MASK_2, + UP_INT_MASK_3, + UP_INT_MASK_4, + UP_INT_MASK_5, + UP_INT_MASK_6, + UP_INT_MASK_7, + UP_INT_MASK_8, + UP_INT_MASK_9, + UP_INT_MASK_10, + UP_INT_MASK_11, + UP_INT_MASK_12, + UP_INT_MASK_13, + UP_INT_MASK_14, + UP_INT_MASK_15, + UP_THRESH_0, /* UPPER threshold values */ + UP_THRESH_1, + UP_THRESH_2, + UP_THRESH_3, + UP_THRESH_4, + UP_THRESH_5, + UP_THRESH_6, + UP_THRESH_7, + UP_THRESH_8, + UP_THRESH_9, + UP_THRESH_10, + UP_THRESH_11, + UP_THRESH_12, + UP_THRESH_13, + UP_THRESH_14, + UP_THRESH_15, + CRITICAL_STATUS_0, /* CRITICAL threshold violated */ + CRITICAL_STATUS_1, + CRITICAL_STATUS_2, + CRITICAL_STATUS_3, + CRITICAL_STATUS_4, + CRITICAL_STATUS_5, + CRITICAL_STATUS_6, + CRITICAL_STATUS_7, + CRITICAL_STATUS_8, + CRITICAL_STATUS_9, + CRITICAL_STATUS_10, + CRITICAL_STATUS_11, + CRITICAL_STATUS_12, + CRITICAL_STATUS_13, + CRITICAL_STATUS_14, + CRITICAL_STATUS_15, + CRIT_INT_STATUS_0, /* CRITICAL interrupt status */ + CRIT_INT_STATUS_1, + CRIT_INT_STATUS_2, + CRIT_INT_STATUS_3, + CRIT_INT_STATUS_4, + CRIT_INT_STATUS_5, + CRIT_INT_STATUS_6, + CRIT_INT_STATUS_7, + CRIT_INT_STATUS_8, + CRIT_INT_STATUS_9, + CRIT_INT_STATUS_10, + CRIT_INT_STATUS_11, + CRIT_INT_STATUS_12, + CRIT_INT_STATUS_13, + CRIT_INT_STATUS_14, + CRIT_INT_STATUS_15, + CRIT_INT_CLEAR_0, /* CRITICAL interrupt clear */ + CRIT_INT_CLEAR_1, + CRIT_INT_CLEAR_2, + CRIT_INT_CLEAR_3, + CRIT_INT_CLEAR_4, + CRIT_INT_CLEAR_5, + CRIT_INT_CLEAR_6, + CRIT_INT_CLEAR_7, + CRIT_INT_CLEAR_8, + CRIT_INT_CLEAR_9, + CRIT_INT_CLEAR_10, + CRIT_INT_CLEAR_11, + CRIT_INT_CLEAR_12, + CRIT_INT_CLEAR_13, + CRIT_INT_CLEAR_14, + CRIT_INT_CLEAR_15, + CRIT_INT_MASK_0, /* CRITICAL interrupt mask */ + CRIT_INT_MASK_1, + CRIT_INT_MASK_2, + CRIT_INT_MASK_3, + CRIT_INT_MASK_4, + CRIT_INT_MASK_5, + CRIT_INT_MASK_6, + CRIT_INT_MASK_7, + CRIT_INT_MASK_8, + CRIT_INT_MASK_9, + CRIT_INT_MASK_10, + CRIT_INT_MASK_11, + CRIT_INT_MASK_12, + CRIT_INT_MASK_13, + CRIT_INT_MASK_14, + CRIT_INT_MASK_15, + CRIT_THRESH_0, /* CRITICAL threshold values */ + CRIT_THRESH_1, + CRIT_THRESH_2, + CRIT_THRESH_3, + CRIT_THRESH_4, + CRIT_THRESH_5, + CRIT_THRESH_6, + CRIT_THRESH_7, + CRIT_THRESH_8, + CRIT_THRESH_9, + CRIT_THRESH_10, + CRIT_THRESH_11, + CRIT_THRESH_12, + CRIT_THRESH_13, + CRIT_THRESH_14, + CRIT_THRESH_15, + + /* WATCHDOG */ + WDOG_BARK_STATUS, + WDOG_BARK_CLEAR, + WDOG_BARK_MASK, + WDOG_BARK_COUNT, + + /* CYCLE COMPLETION MONITOR */ + CC_MON_STATUS, + CC_MON_CLEAR, + CC_MON_MASK, + + MIN_STATUS_0, /* MIN threshold violated */ + MIN_STATUS_1, + MIN_STATUS_2, + MIN_STATUS_3, + MIN_STATUS_4, + MIN_STATUS_5, + MIN_STATUS_6, + MIN_STATUS_7, + MIN_STATUS_8, + MIN_STATUS_9, + MIN_STATUS_10, + MIN_STATUS_11, + MIN_STATUS_12, + MIN_STATUS_13, + MIN_STATUS_14, + MIN_STATUS_15, + MAX_STATUS_0, /* MAX threshold violated */ + MAX_STATUS_1, + MAX_STATUS_2, + MAX_STATUS_3, + MAX_STATUS_4, + MAX_STATUS_5, + MAX_STATUS_6, + MAX_STATUS_7, + MAX_STATUS_8, + MAX_STATUS_9, + MAX_STATUS_10, + MAX_STATUS_11, + MAX_STATUS_12, + MAX_STATUS_13, + MAX_STATUS_14, + MAX_STATUS_15, + + /* Keep last */ + MAX_REGFIELDS +}; + +/** + * struct tsens_features - Features supported by the IP + * @ver_major: Major number of IP version + * @crit_int: does the IP support critical interrupts? + * @adc: do the sensors only output adc code (instead of temperature)? + * @srot_split: does the IP neatly splits the register space into SROT and TM, + * with SROT only being available to secure boot firmware? + * @has_watchdog: does this IP support watchdog functionality? + * @max_sensors: maximum sensors supported by this version of the IP + */ +struct tsens_features { + unsigned int ver_major; + unsigned int crit_int:1; + unsigned int adc:1; + unsigned int srot_split:1; + unsigned int has_watchdog:1; + unsigned int max_sensors; +}; + +/** + * struct tsens_plat_data - tsens compile-time platform data + * @num_sensors: Number of sensors supported by platform + * @ops: operations the tsens instance supports + * @hw_ids: Subset of sensors ids supported by platform, if not the first n + * @feat: features of the IP + * @fields: bitfield locations + */ +struct tsens_plat_data { + const u32 num_sensors; + const struct tsens_ops *ops; + unsigned int *hw_ids; + struct tsens_features *feat; + const struct reg_field *fields; +}; + +/** + * struct tsens_context - Registers to be saved/restored across a context loss + * @threshold: Threshold register value + * @control: Control register value + */ +struct tsens_context { + int threshold; + int control; +}; + +/** + * struct tsens_priv - private data for each instance of the tsens IP + * @dev: pointer to struct device + * @num_sensors: number of sensors enabled on this device + * @tm_map: pointer to TM register address space + * @srot_map: pointer to SROT register address space + * @tm_offset: deal with old device trees that don't address TM and SROT + * address space separately + * @ul_lock: lock while processing upper/lower threshold interrupts + * @crit_lock: lock while processing critical threshold interrupts + * @rf: array of regmap_fields used to store value of the field + * @ctx: registers to be saved and restored during suspend/resume + * @feat: features of the IP + * @fields: bitfield locations + * @ops: pointer to list of callbacks supported by this device + * @debug_root: pointer to debugfs dentry for all tsens + * @debug: pointer to debugfs dentry for tsens controller + * @sensor: list of sensors attached to this device + */ +struct tsens_priv { + struct device *dev; + u32 num_sensors; + struct regmap *tm_map; + struct regmap *srot_map; + u32 tm_offset; + + /* lock for upper/lower threshold interrupts */ + spinlock_t ul_lock; + + struct regmap_field *rf[MAX_REGFIELDS]; + struct tsens_context ctx; + struct tsens_features *feat; + const struct reg_field *fields; + const struct tsens_ops *ops; + + struct dentry *debug_root; + struct dentry *debug; + + struct tsens_sensor sensor[]; +}; + +char *qfprom_read(struct device *dev, const char *cname); +void compute_intercept_slope(struct tsens_priv *priv, u32 *pt1, u32 *pt2, u32 mode); +int init_common(struct tsens_priv *priv); +int get_temp_tsens_valid(const struct tsens_sensor *s, int *temp); +int get_temp_common(const struct tsens_sensor *s, int *temp); + +/* TSENS target */ +extern struct tsens_plat_data data_8960; + +/* TSENS v0.1 targets */ +extern struct tsens_plat_data data_8916, data_8939, data_8974; + +/* TSENS v1 targets */ +extern struct tsens_plat_data data_tsens_v1, data_8976, data_8956; + +/* TSENS v2 targets */ +extern struct tsens_plat_data data_8996, data_tsens_v2; + +#endif /* __QCOM_TSENS_H__ */ |