diff options
Diffstat (limited to 'drivers/usb/host/ehci-pci.c')
| -rw-r--r-- | drivers/usb/host/ehci-pci.c | 443 |
1 files changed, 443 insertions, 0 deletions
diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c new file mode 100644 index 000000000..638f03b89 --- /dev/null +++ b/drivers/usb/host/ehci-pci.c @@ -0,0 +1,443 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * EHCI HCD (Host Controller Driver) PCI Bus Glue. + * + * Copyright (c) 2000-2004 by David Brownell + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/pci.h> +#include <linux/usb.h> +#include <linux/usb/hcd.h> + +#include "ehci.h" +#include "pci-quirks.h" + +#define DRIVER_DESC "EHCI PCI platform driver" + +static const char hcd_name[] = "ehci-pci"; + +/* defined here to avoid adding to pci_ids.h for single instance use */ +#define PCI_DEVICE_ID_INTEL_CE4100_USB 0x2e70 + +#define PCI_VENDOR_ID_ASPEED 0x1a03 +#define PCI_DEVICE_ID_ASPEED_EHCI 0x2603 + +/*-------------------------------------------------------------------------*/ +#define PCI_DEVICE_ID_INTEL_QUARK_X1000_SOC 0x0939 +static inline bool is_intel_quark_x1000(struct pci_dev *pdev) +{ + return pdev->vendor == PCI_VENDOR_ID_INTEL && + pdev->device == PCI_DEVICE_ID_INTEL_QUARK_X1000_SOC; +} + +/* + * This is the list of PCI IDs for the devices that have EHCI USB class and + * specific drivers for that. One of the example is a ChipIdea device installed + * on some Intel MID platforms. + */ +static const struct pci_device_id bypass_pci_id_table[] = { + /* ChipIdea on Intel MID platform */ + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x0811), }, + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x0829), }, + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0xe006), }, + {} +}; + +static inline bool is_bypassed_id(struct pci_dev *pdev) +{ + return !!pci_match_id(bypass_pci_id_table, pdev); +} + +/* + * 0x84 is the offset of in/out threshold register, + * and it is the same offset as the register of 'hostpc'. + */ +#define intel_quark_x1000_insnreg01 hostpc + +/* Maximum usable threshold value is 0x7f dwords for both IN and OUT */ +#define INTEL_QUARK_X1000_EHCI_MAX_THRESHOLD 0x007f007f + +/* called after powerup, by probe or system-pm "wakeup" */ +static int ehci_pci_reinit(struct ehci_hcd *ehci, struct pci_dev *pdev) +{ + int retval; + + /* we expect static quirk code to handle the "extended capabilities" + * (currently just BIOS handoff) allowed starting with EHCI 0.96 + */ + + /* PCI Memory-Write-Invalidate cycle support is optional (uncommon) */ + retval = pci_set_mwi(pdev); + if (!retval) + ehci_dbg(ehci, "MWI active\n"); + + /* Reset the threshold limit */ + if (is_intel_quark_x1000(pdev)) { + /* + * For the Intel QUARK X1000, raise the I/O threshold to the + * maximum usable value in order to improve performance. + */ + ehci_writel(ehci, INTEL_QUARK_X1000_EHCI_MAX_THRESHOLD, + ehci->regs->intel_quark_x1000_insnreg01); + } + + return 0; +} + +/* called during probe() after chip reset completes */ +static int ehci_pci_setup(struct usb_hcd *hcd) +{ + struct ehci_hcd *ehci = hcd_to_ehci(hcd); + struct pci_dev *pdev = to_pci_dev(hcd->self.controller); + u32 temp; + int retval; + + ehci->caps = hcd->regs; + + /* + * ehci_init() causes memory for DMA transfers to be + * allocated. Thus, any vendor-specific workarounds based on + * limiting the type of memory used for DMA transfers must + * happen before ehci_setup() is called. + * + * Most other workarounds can be done either before or after + * init and reset; they are located here too. + */ + switch (pdev->vendor) { + case PCI_VENDOR_ID_TOSHIBA_2: + /* celleb's companion chip */ + if (pdev->device == 0x01b5) { +#ifdef CONFIG_USB_EHCI_BIG_ENDIAN_MMIO + ehci->big_endian_mmio = 1; +#else + ehci_warn(ehci, + "unsupported big endian Toshiba quirk\n"); +#endif + } + break; + case PCI_VENDOR_ID_NVIDIA: + /* NVidia reports that certain chips don't handle + * QH, ITD, or SITD addresses above 2GB. (But TD, + * data buffer, and periodic schedule are normal.) + */ + switch (pdev->device) { + case 0x003c: /* MCP04 */ + case 0x005b: /* CK804 */ + case 0x00d8: /* CK8 */ + case 0x00e8: /* CK8S */ + if (dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(31)) < 0) + ehci_warn(ehci, "can't enable NVidia " + "workaround for >2GB RAM\n"); + break; + + /* Some NForce2 chips have problems with selective suspend; + * fixed in newer silicon. + */ + case 0x0068: + if (pdev->revision < 0xa4) + ehci->no_selective_suspend = 1; + break; + } + break; + case PCI_VENDOR_ID_INTEL: + if (pdev->device == PCI_DEVICE_ID_INTEL_CE4100_USB) + hcd->has_tt = 1; + break; + case PCI_VENDOR_ID_TDI: + if (pdev->device == PCI_DEVICE_ID_TDI_EHCI) + hcd->has_tt = 1; + break; + case PCI_VENDOR_ID_AMD: + /* AMD PLL quirk */ + if (usb_amd_quirk_pll_check()) + ehci->amd_pll_fix = 1; + /* AMD8111 EHCI doesn't work, according to AMD errata */ + if (pdev->device == 0x7463) { + ehci_info(ehci, "ignoring AMD8111 (errata)\n"); + retval = -EIO; + goto done; + } + + /* + * EHCI controller on AMD SB700/SB800/Hudson-2/3 platforms may + * read/write memory space which does not belong to it when + * there is NULL pointer with T-bit set to 1 in the frame list + * table. To avoid the issue, the frame list link pointer + * should always contain a valid pointer to a inactive qh. + */ + if (pdev->device == 0x7808) { + ehci->use_dummy_qh = 1; + ehci_info(ehci, "applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround\n"); + } + break; + case PCI_VENDOR_ID_VIA: + if (pdev->device == 0x3104 && (pdev->revision & 0xf0) == 0x60) { + u8 tmp; + + /* The VT6212 defaults to a 1 usec EHCI sleep time which + * hogs the PCI bus *badly*. Setting bit 5 of 0x4B makes + * that sleep time use the conventional 10 usec. + */ + pci_read_config_byte(pdev, 0x4b, &tmp); + if (tmp & 0x20) + break; + pci_write_config_byte(pdev, 0x4b, tmp | 0x20); + } + break; + case PCI_VENDOR_ID_ATI: + /* AMD PLL quirk */ + if (usb_amd_quirk_pll_check()) + ehci->amd_pll_fix = 1; + + /* + * EHCI controller on AMD SB700/SB800/Hudson-2/3 platforms may + * read/write memory space which does not belong to it when + * there is NULL pointer with T-bit set to 1 in the frame list + * table. To avoid the issue, the frame list link pointer + * should always contain a valid pointer to a inactive qh. + */ + if (pdev->device == 0x4396) { + ehci->use_dummy_qh = 1; + ehci_info(ehci, "applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround\n"); + } + /* SB600 and old version of SB700 have a bug in EHCI controller, + * which causes usb devices lose response in some cases. + */ + if ((pdev->device == 0x4386 || pdev->device == 0x4396) && + usb_amd_hang_symptom_quirk()) { + u8 tmp; + ehci_info(ehci, "applying AMD SB600/SB700 USB freeze workaround\n"); + pci_read_config_byte(pdev, 0x53, &tmp); + pci_write_config_byte(pdev, 0x53, tmp | (1<<3)); + } + break; + case PCI_VENDOR_ID_NETMOS: + /* MosChip frame-index-register bug */ + ehci_info(ehci, "applying MosChip frame-index workaround\n"); + ehci->frame_index_bug = 1; + break; + case PCI_VENDOR_ID_HUAWEI: + /* Synopsys HC bug */ + if (pdev->device == 0xa239) { + ehci_info(ehci, "applying Synopsys HC workaround\n"); + ehci->has_synopsys_hc_bug = 1; + } + break; + case PCI_VENDOR_ID_ASPEED: + if (pdev->device == PCI_DEVICE_ID_ASPEED_EHCI) { + ehci_info(ehci, "applying Aspeed HC workaround\n"); + ehci->is_aspeed = 1; + } + break; + } + + /* optional debug port, normally in the first BAR */ + temp = pci_find_capability(pdev, PCI_CAP_ID_DBG); + if (temp) { + pci_read_config_dword(pdev, temp, &temp); + temp >>= 16; + if (((temp >> 13) & 7) == 1) { + u32 hcs_params = ehci_readl(ehci, + &ehci->caps->hcs_params); + + temp &= 0x1fff; + ehci->debug = hcd->regs + temp; + temp = ehci_readl(ehci, &ehci->debug->control); + ehci_info(ehci, "debug port %d%s\n", + HCS_DEBUG_PORT(hcs_params), + (temp & DBGP_ENABLED) ? " IN USE" : ""); + if (!(temp & DBGP_ENABLED)) + ehci->debug = NULL; + } + } + + retval = ehci_setup(hcd); + if (retval) + return retval; + + /* These workarounds need to be applied after ehci_setup() */ + switch (pdev->vendor) { + case PCI_VENDOR_ID_NEC: + case PCI_VENDOR_ID_INTEL: + case PCI_VENDOR_ID_AMD: + ehci->need_io_watchdog = 0; + break; + case PCI_VENDOR_ID_NVIDIA: + switch (pdev->device) { + /* MCP89 chips on the MacBookAir3,1 give EPROTO when + * fetching device descriptors unless LPM is disabled. + * There are also intermittent problems enumerating + * devices with PPCD enabled. + */ + case 0x0d9d: + ehci_info(ehci, "disable ppcd for nvidia mcp89\n"); + ehci->has_ppcd = 0; + ehci->command &= ~CMD_PPCEE; + break; + } + break; + } + + /* at least the Genesys GL880S needs fixup here */ + temp = HCS_N_CC(ehci->hcs_params) * HCS_N_PCC(ehci->hcs_params); + temp &= 0x0f; + if (temp && HCS_N_PORTS(ehci->hcs_params) > temp) { + ehci_dbg(ehci, "bogus port configuration: " + "cc=%d x pcc=%d < ports=%d\n", + HCS_N_CC(ehci->hcs_params), + HCS_N_PCC(ehci->hcs_params), + HCS_N_PORTS(ehci->hcs_params)); + + switch (pdev->vendor) { + case 0x17a0: /* GENESYS */ + /* GL880S: should be PORTS=2 */ + temp |= (ehci->hcs_params & ~0xf); + ehci->hcs_params = temp; + break; + case PCI_VENDOR_ID_NVIDIA: + /* NF4: should be PCC=10 */ + break; + } + } + + /* Serial Bus Release Number is at PCI 0x60 offset */ + if (pdev->vendor == PCI_VENDOR_ID_STMICRO + && pdev->device == PCI_DEVICE_ID_STMICRO_USB_HOST) + ; /* ConneXT has no sbrn register */ + else if (pdev->vendor == PCI_VENDOR_ID_HUAWEI + && pdev->device == 0xa239) + ; /* HUAWEI Kunpeng920 USB EHCI has no sbrn register */ + else + pci_read_config_byte(pdev, 0x60, &ehci->sbrn); + + /* Keep this around for a while just in case some EHCI + * implementation uses legacy PCI PM support. This test + * can be removed on 17 Dec 2009 if the dev_warn() hasn't + * been triggered by then. + */ + if (!device_can_wakeup(&pdev->dev)) { + u16 port_wake; + + pci_read_config_word(pdev, 0x62, &port_wake); + if (port_wake & 0x0001) { + dev_warn(&pdev->dev, "Enabling legacy PCI PM\n"); + device_set_wakeup_capable(&pdev->dev, 1); + } + } + +#ifdef CONFIG_PM + if (ehci->no_selective_suspend && device_can_wakeup(&pdev->dev)) + ehci_warn(ehci, "selective suspend/wakeup unavailable\n"); +#endif + + retval = ehci_pci_reinit(ehci, pdev); +done: + return retval; +} + +/*-------------------------------------------------------------------------*/ + +#ifdef CONFIG_PM + +/* suspend/resume, section 4.3 */ + +/* These routines rely on the PCI bus glue + * to handle powerdown and wakeup, and currently also on + * transceivers that don't need any software attention to set up + * the right sort of wakeup. + * Also they depend on separate root hub suspend/resume. + */ + +static int ehci_pci_resume(struct usb_hcd *hcd, bool hibernated) +{ + struct ehci_hcd *ehci = hcd_to_ehci(hcd); + struct pci_dev *pdev = to_pci_dev(hcd->self.controller); + + if (ehci_resume(hcd, hibernated) != 0) + (void) ehci_pci_reinit(ehci, pdev); + return 0; +} + +#else + +#define ehci_suspend NULL +#define ehci_pci_resume NULL +#endif /* CONFIG_PM */ + +static struct hc_driver __read_mostly ehci_pci_hc_driver; + +static const struct ehci_driver_overrides pci_overrides __initconst = { + .reset = ehci_pci_setup, +}; + +/*-------------------------------------------------------------------------*/ + +static int ehci_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id) +{ + if (is_bypassed_id(pdev)) + return -ENODEV; + return usb_hcd_pci_probe(pdev, id, &ehci_pci_hc_driver); +} + +static void ehci_pci_remove(struct pci_dev *pdev) +{ + pci_clear_mwi(pdev); + usb_hcd_pci_remove(pdev); +} + +/* PCI driver selection metadata; PCI hotplugging uses this */ +static const struct pci_device_id pci_ids [] = { { + /* handle any USB 2.0 EHCI controller */ + PCI_DEVICE_CLASS(PCI_CLASS_SERIAL_USB_EHCI, ~0), + }, { + PCI_VDEVICE(STMICRO, PCI_DEVICE_ID_STMICRO_USB_HOST), + }, + { /* end: all zeroes */ } +}; +MODULE_DEVICE_TABLE(pci, pci_ids); + +/* pci driver glue; this is a "new style" PCI driver module */ +static struct pci_driver ehci_pci_driver = { + .name = hcd_name, + .id_table = pci_ids, + + .probe = ehci_pci_probe, + .remove = ehci_pci_remove, + .shutdown = usb_hcd_pci_shutdown, + +#ifdef CONFIG_PM + .driver = { + .pm = &usb_hcd_pci_pm_ops + }, +#endif +}; + +static int __init ehci_pci_init(void) +{ + if (usb_disabled()) + return -ENODEV; + + pr_info("%s: " DRIVER_DESC "\n", hcd_name); + + ehci_init_driver(&ehci_pci_hc_driver, &pci_overrides); + + /* Entries for the PCI suspend/resume callbacks are special */ + ehci_pci_hc_driver.pci_suspend = ehci_suspend; + ehci_pci_hc_driver.pci_resume = ehci_pci_resume; + + return pci_register_driver(&ehci_pci_driver); +} +module_init(ehci_pci_init); + +static void __exit ehci_pci_cleanup(void) +{ + pci_unregister_driver(&ehci_pci_driver); +} +module_exit(ehci_pci_cleanup); + +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_AUTHOR("David Brownell"); +MODULE_AUTHOR("Alan Stern"); +MODULE_LICENSE("GPL"); |