diff options
Diffstat (limited to '')
| -rw-r--r-- | drivers/usb/host/ohci-sm501.c | 266 |
1 files changed, 266 insertions, 0 deletions
diff --git a/drivers/usb/host/ohci-sm501.c b/drivers/usb/host/ohci-sm501.c new file mode 100644 index 000000000..b91d50da6 --- /dev/null +++ b/drivers/usb/host/ohci-sm501.c @@ -0,0 +1,266 @@ +// SPDX-License-Identifier: GPL-1.0+ +/* + * OHCI HCD (Host Controller Driver) for USB. + * + * (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at> + * (C) Copyright 2000-2005 David Brownell + * (C) Copyright 2002 Hewlett-Packard Company + * (C) Copyright 2008 Magnus Damm + * + * SM501 Bus Glue - based on ohci-omap.c + * + * This file is licenced under the GPL. + */ + +#include <linux/interrupt.h> +#include <linux/jiffies.h> +#include <linux/platform_device.h> +#include <linux/dma-mapping.h> +#include <linux/sm501.h> +#include <linux/sm501-regs.h> + +static int ohci_sm501_init(struct usb_hcd *hcd) +{ + return ohci_init(hcd_to_ohci(hcd)); +} + +static int ohci_sm501_start(struct usb_hcd *hcd) +{ + struct device *dev = hcd->self.controller; + int ret; + + ret = ohci_run(hcd_to_ohci(hcd)); + if (ret < 0) { + dev_err(dev, "can't start %s", hcd->self.bus_name); + ohci_stop(hcd); + } + + return ret; +} + +/*-------------------------------------------------------------------------*/ + +static const struct hc_driver ohci_sm501_hc_driver = { + .description = hcd_name, + .product_desc = "SM501 OHCI", + .hcd_priv_size = sizeof(struct ohci_hcd), + + /* + * generic hardware linkage + */ + .irq = ohci_irq, + .flags = HCD_USB11 | HCD_MEMORY, + + /* + * basic lifecycle operations + */ + .reset = ohci_sm501_init, + .start = ohci_sm501_start, + .stop = ohci_stop, + .shutdown = ohci_shutdown, + + /* + * managing i/o requests and associated device resources + */ + .urb_enqueue = ohci_urb_enqueue, + .urb_dequeue = ohci_urb_dequeue, + .endpoint_disable = ohci_endpoint_disable, + + /* + * scheduling support + */ + .get_frame_number = ohci_get_frame, + + /* + * root hub support + */ + .hub_status_data = ohci_hub_status_data, + .hub_control = ohci_hub_control, +#ifdef CONFIG_PM + .bus_suspend = ohci_bus_suspend, + .bus_resume = ohci_bus_resume, +#endif + .start_port_reset = ohci_start_port_reset, +}; + +/*-------------------------------------------------------------------------*/ + +static int ohci_hcd_sm501_drv_probe(struct platform_device *pdev) +{ + const struct hc_driver *driver = &ohci_sm501_hc_driver; + struct device *dev = &pdev->dev; + struct resource *res, *mem; + int retval, irq; + struct usb_hcd *hcd = NULL; + + irq = retval = platform_get_irq(pdev, 0); + if (retval < 0) + goto err0; + + mem = platform_get_resource(pdev, IORESOURCE_MEM, 1); + if (mem == NULL) { + dev_err(dev, "no resource definition for memory\n"); + retval = -ENOENT; + goto err0; + } + + if (!request_mem_region(mem->start, resource_size(mem), pdev->name)) { + dev_err(dev, "request_mem_region failed\n"); + retval = -EBUSY; + goto err0; + } + + /* allocate, reserve and remap resources for registers */ + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (res == NULL) { + dev_err(dev, "no resource definition for registers\n"); + retval = -ENOENT; + goto err1; + } + + hcd = usb_create_hcd(driver, &pdev->dev, dev_name(&pdev->dev)); + if (!hcd) { + retval = -ENOMEM; + goto err1; + } + + hcd->rsrc_start = res->start; + hcd->rsrc_len = resource_size(res); + + if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, pdev->name)) { + dev_err(dev, "request_mem_region failed\n"); + retval = -EBUSY; + goto err3; + } + + hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len); + if (hcd->regs == NULL) { + dev_err(dev, "cannot remap registers\n"); + retval = -ENXIO; + goto err4; + } + + ohci_hcd_init(hcd_to_ohci(hcd)); + + /* The sm501 chip is equipped with local memory that may be used + * by on-chip devices such as the video controller and the usb host. + * This driver uses genalloc so that usb allocations with + * gen_pool_dma_alloc() allocate from this local memory. The dma_handle + * returned by gen_pool_dma_alloc() will be an offset starting from 0 + * for the first local memory byte. + * + * So as long as data is allocated using gen_pool_dma_alloc() all is + * fine. This is however not always the case - buffers may be allocated + * using kmalloc() - so the usb core needs to be told that it must copy + * data into our local memory if the buffers happen to be placed in + * regular memory. A non-null hcd->localmem_pool initialized by the + * the call to usb_hcd_setup_local_mem() below does just that. + */ + + retval = usb_hcd_setup_local_mem(hcd, mem->start, + mem->start - mem->parent->start, + resource_size(mem)); + if (retval < 0) + goto err5; + retval = usb_add_hcd(hcd, irq, IRQF_SHARED); + if (retval) + goto err5; + device_wakeup_enable(hcd->self.controller); + + /* enable power and unmask interrupts */ + + sm501_unit_power(dev->parent, SM501_GATE_USB_HOST, 1); + sm501_modify_reg(dev->parent, SM501_IRQ_MASK, 1 << 6, 0); + + return 0; +err5: + iounmap(hcd->regs); +err4: + release_mem_region(hcd->rsrc_start, hcd->rsrc_len); +err3: + usb_put_hcd(hcd); +err1: + release_mem_region(mem->start, resource_size(mem)); +err0: + return retval; +} + +static int ohci_hcd_sm501_drv_remove(struct platform_device *pdev) +{ + struct usb_hcd *hcd = platform_get_drvdata(pdev); + struct resource *mem; + + usb_remove_hcd(hcd); + iounmap(hcd->regs); + release_mem_region(hcd->rsrc_start, hcd->rsrc_len); + usb_put_hcd(hcd); + mem = platform_get_resource(pdev, IORESOURCE_MEM, 1); + if (mem) + release_mem_region(mem->start, resource_size(mem)); + + /* mask interrupts and disable power */ + + sm501_modify_reg(pdev->dev.parent, SM501_IRQ_MASK, 0, 1 << 6); + sm501_unit_power(pdev->dev.parent, SM501_GATE_USB_HOST, 0); + + return 0; +} + +/*-------------------------------------------------------------------------*/ + +#ifdef CONFIG_PM +static int ohci_sm501_suspend(struct platform_device *pdev, pm_message_t msg) +{ + struct device *dev = &pdev->dev; + struct usb_hcd *hcd = platform_get_drvdata(pdev); + struct ohci_hcd *ohci = hcd_to_ohci(hcd); + bool do_wakeup = device_may_wakeup(dev); + int ret; + + if (time_before(jiffies, ohci->next_statechange)) + msleep(5); + ohci->next_statechange = jiffies; + + ret = ohci_suspend(hcd, do_wakeup); + if (ret) + return ret; + + sm501_unit_power(dev->parent, SM501_GATE_USB_HOST, 0); + return ret; +} + +static int ohci_sm501_resume(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct usb_hcd *hcd = platform_get_drvdata(pdev); + struct ohci_hcd *ohci = hcd_to_ohci(hcd); + + if (time_before(jiffies, ohci->next_statechange)) + msleep(5); + ohci->next_statechange = jiffies; + + sm501_unit_power(dev->parent, SM501_GATE_USB_HOST, 1); + ohci_resume(hcd, false); + return 0; +} +#else +#define ohci_sm501_suspend NULL +#define ohci_sm501_resume NULL +#endif + +/*-------------------------------------------------------------------------*/ + +/* + * Driver definition to register with the SM501 bus + */ +static struct platform_driver ohci_hcd_sm501_driver = { + .probe = ohci_hcd_sm501_drv_probe, + .remove = ohci_hcd_sm501_drv_remove, + .shutdown = usb_hcd_platform_shutdown, + .suspend = ohci_sm501_suspend, + .resume = ohci_sm501_resume, + .driver = { + .name = "sm501-usb", + }, +}; +MODULE_ALIAS("platform:sm501-usb"); |