diff options
Diffstat (limited to 'drivers/usb/host/ohci.h')
| -rw-r--r-- | drivers/usb/host/ohci.h | 743 |
1 files changed, 743 insertions, 0 deletions
diff --git a/drivers/usb/host/ohci.h b/drivers/usb/host/ohci.h new file mode 100644 index 000000000..aac6285b3 --- /dev/null +++ b/drivers/usb/host/ohci.h @@ -0,0 +1,743 @@ +/* SPDX-License-Identifier: GPL-1.0+ */ +/* + * OHCI HCD (Host Controller Driver) for USB. + * + * (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at> + * (C) Copyright 2000-2002 David Brownell <dbrownell@users.sourceforge.net> + * + * This file is licenced under the GPL. + */ + +/* + * __hc32 and __hc16 are "Host Controller" types, they may be equivalent to + * __leXX (normally) or __beXX (given OHCI_BIG_ENDIAN), depending on the + * host controller implementation. + */ +typedef __u32 __bitwise __hc32; +typedef __u16 __bitwise __hc16; + +/* + * OHCI Endpoint Descriptor (ED) ... holds TD queue + * See OHCI spec, section 4.2 + * + * This is a "Queue Head" for those transfers, which is why + * both EHCI and UHCI call similar structures a "QH". + */ +struct ed { + /* first fields are hardware-specified */ + __hc32 hwINFO; /* endpoint config bitmap */ + /* info bits defined by hcd */ +#define ED_DEQUEUE (1 << 27) + /* info bits defined by the hardware */ +#define ED_ISO (1 << 15) +#define ED_SKIP (1 << 14) +#define ED_LOWSPEED (1 << 13) +#define ED_OUT (0x01 << 11) +#define ED_IN (0x02 << 11) + __hc32 hwTailP; /* tail of TD list */ + __hc32 hwHeadP; /* head of TD list (hc r/w) */ +#define ED_C (0x02) /* toggle carry */ +#define ED_H (0x01) /* halted */ + __hc32 hwNextED; /* next ED in list */ + + /* rest are purely for the driver's use */ + dma_addr_t dma; /* addr of ED */ + struct td *dummy; /* next TD to activate */ + + /* host's view of schedule */ + struct ed *ed_next; /* on schedule or rm_list */ + struct ed *ed_prev; /* for non-interrupt EDs */ + struct list_head td_list; /* "shadow list" of our TDs */ + struct list_head in_use_list; + + /* create --> IDLE --> OPER --> ... --> IDLE --> destroy + * usually: OPER --> UNLINK --> (IDLE | OPER) --> ... + */ + u8 state; /* ED_{IDLE,UNLINK,OPER} */ +#define ED_IDLE 0x00 /* NOT linked to HC */ +#define ED_UNLINK 0x01 /* being unlinked from hc */ +#define ED_OPER 0x02 /* IS linked to hc */ + + u8 type; /* PIPE_{BULK,...} */ + + /* periodic scheduling params (for intr and iso) */ + u8 branch; + u16 interval; + u16 load; + u16 last_iso; /* iso only */ + + /* HC may see EDs on rm_list until next frame (frame_no == tick) */ + u16 tick; + + /* Detect TDs not added to the done queue */ + unsigned takeback_wdh_cnt; + struct td *pending_td; +#define OKAY_TO_TAKEBACK(ohci, ed) \ + ((int) (ohci->wdh_cnt - ed->takeback_wdh_cnt) >= 0) + +} __attribute__ ((aligned(16))); + +#define ED_MASK ((u32)~0x0f) /* strip hw status in low addr bits */ + + +/* + * OHCI Transfer Descriptor (TD) ... one per transfer segment + * See OHCI spec, sections 4.3.1 (general = control/bulk/interrupt) + * and 4.3.2 (iso) + */ +struct td { + /* first fields are hardware-specified */ + __hc32 hwINFO; /* transfer info bitmask */ + + /* hwINFO bits for both general and iso tds: */ +#define TD_CC 0xf0000000 /* condition code */ +#define TD_CC_GET(td_p) ((td_p >>28) & 0x0f) +//#define TD_CC_SET(td_p, cc) (td_p) = ((td_p) & 0x0fffffff) | (((cc) & 0x0f) << 28) +#define TD_DI 0x00E00000 /* frames before interrupt */ +#define TD_DI_SET(X) (((X) & 0x07)<< 21) + /* these two bits are available for definition/use by HCDs in both + * general and iso tds ... others are available for only one type + */ +#define TD_DONE 0x00020000 /* retired to donelist */ +#define TD_ISO 0x00010000 /* copy of ED_ISO */ + + /* hwINFO bits for general tds: */ +#define TD_EC 0x0C000000 /* error count */ +#define TD_T 0x03000000 /* data toggle state */ +#define TD_T_DATA0 0x02000000 /* DATA0 */ +#define TD_T_DATA1 0x03000000 /* DATA1 */ +#define TD_T_TOGGLE 0x00000000 /* uses ED_C */ +#define TD_DP 0x00180000 /* direction/pid */ +#define TD_DP_SETUP 0x00000000 /* SETUP pid */ +#define TD_DP_IN 0x00100000 /* IN pid */ +#define TD_DP_OUT 0x00080000 /* OUT pid */ + /* 0x00180000 rsvd */ +#define TD_R 0x00040000 /* round: short packets OK? */ + + /* (no hwINFO #defines yet for iso tds) */ + + __hc32 hwCBP; /* Current Buffer Pointer (or 0) */ + __hc32 hwNextTD; /* Next TD Pointer */ + __hc32 hwBE; /* Memory Buffer End Pointer */ + + /* PSW is only for ISO. Only 1 PSW entry is used, but on + * big-endian PPC hardware that's the second entry. + */ +#define MAXPSW 2 + __hc16 hwPSW [MAXPSW]; + + /* rest are purely for the driver's use */ + __u8 index; + struct ed *ed; + struct td *td_hash; /* dma-->td hashtable */ + struct td *next_dl_td; + struct urb *urb; + + dma_addr_t td_dma; /* addr of this TD */ + dma_addr_t data_dma; /* addr of data it points to */ + + struct list_head td_list; /* "shadow list", TDs on same ED */ +} __attribute__ ((aligned(32))); /* c/b/i need 16; only iso needs 32 */ + +#define TD_MASK ((u32)~0x1f) /* strip hw status in low addr bits */ + +/* + * Hardware transfer status codes -- CC from td->hwINFO or td->hwPSW + */ +#define TD_CC_NOERROR 0x00 +#define TD_CC_CRC 0x01 +#define TD_CC_BITSTUFFING 0x02 +#define TD_CC_DATATOGGLEM 0x03 +#define TD_CC_STALL 0x04 +#define TD_DEVNOTRESP 0x05 +#define TD_PIDCHECKFAIL 0x06 +#define TD_UNEXPECTEDPID 0x07 +#define TD_DATAOVERRUN 0x08 +#define TD_DATAUNDERRUN 0x09 + /* 0x0A, 0x0B reserved for hardware */ +#define TD_BUFFEROVERRUN 0x0C +#define TD_BUFFERUNDERRUN 0x0D + /* 0x0E, 0x0F reserved for HCD */ +#define TD_NOTACCESSED 0x0F + + +/* map OHCI TD status codes (CC) to errno values */ +static const int __maybe_unused cc_to_error [16] = { + /* No Error */ 0, + /* CRC Error */ -EILSEQ, + /* Bit Stuff */ -EPROTO, + /* Data Togg */ -EILSEQ, + /* Stall */ -EPIPE, + /* DevNotResp */ -ETIME, + /* PIDCheck */ -EPROTO, + /* UnExpPID */ -EPROTO, + /* DataOver */ -EOVERFLOW, + /* DataUnder */ -EREMOTEIO, + /* (for hw) */ -EIO, + /* (for hw) */ -EIO, + /* BufferOver */ -ECOMM, + /* BuffUnder */ -ENOSR, + /* (for HCD) */ -EALREADY, + /* (for HCD) */ -EALREADY +}; + + +/* + * The HCCA (Host Controller Communications Area) is a 256 byte + * structure defined section 4.4.1 of the OHCI spec. The HC is + * told the base address of it. It must be 256-byte aligned. + */ +struct ohci_hcca { +#define NUM_INTS 32 + __hc32 int_table [NUM_INTS]; /* periodic schedule */ + + /* + * OHCI defines u16 frame_no, followed by u16 zero pad. + * Since some processors can't do 16 bit bus accesses, + * portable access must be a 32 bits wide. + */ + __hc32 frame_no; /* current frame number */ + __hc32 done_head; /* info returned for an interrupt */ + u8 reserved_for_hc [116]; + u8 what [4]; /* spec only identifies 252 bytes :) */ +} __attribute__ ((aligned(256))); + +/* + * This is the structure of the OHCI controller's memory mapped I/O region. + * You must use readl() and writel() (in <asm/io.h>) to access these fields!! + * Layout is in section 7 (and appendix B) of the spec. + */ +struct ohci_regs { + /* control and status registers (section 7.1) */ + __hc32 revision; + __hc32 control; + __hc32 cmdstatus; + __hc32 intrstatus; + __hc32 intrenable; + __hc32 intrdisable; + + /* memory pointers (section 7.2) */ + __hc32 hcca; + __hc32 ed_periodcurrent; + __hc32 ed_controlhead; + __hc32 ed_controlcurrent; + __hc32 ed_bulkhead; + __hc32 ed_bulkcurrent; + __hc32 donehead; + + /* frame counters (section 7.3) */ + __hc32 fminterval; + __hc32 fmremaining; + __hc32 fmnumber; + __hc32 periodicstart; + __hc32 lsthresh; + + /* Root hub ports (section 7.4) */ + struct ohci_roothub_regs { + __hc32 a; + __hc32 b; + __hc32 status; +#define MAX_ROOT_PORTS 15 /* maximum OHCI root hub ports (RH_A_NDP) */ + __hc32 portstatus [MAX_ROOT_PORTS]; + } roothub; + + /* and optional "legacy support" registers (appendix B) at 0x0100 */ + +} __attribute__ ((aligned(32))); + + +/* OHCI CONTROL AND STATUS REGISTER MASKS */ + +/* + * HcControl (control) register masks + */ +#define OHCI_CTRL_CBSR (3 << 0) /* control/bulk service ratio */ +#define OHCI_CTRL_PLE (1 << 2) /* periodic list enable */ +#define OHCI_CTRL_IE (1 << 3) /* isochronous enable */ +#define OHCI_CTRL_CLE (1 << 4) /* control list enable */ +#define OHCI_CTRL_BLE (1 << 5) /* bulk list enable */ +#define OHCI_CTRL_HCFS (3 << 6) /* host controller functional state */ +#define OHCI_CTRL_IR (1 << 8) /* interrupt routing */ +#define OHCI_CTRL_RWC (1 << 9) /* remote wakeup connected */ +#define OHCI_CTRL_RWE (1 << 10) /* remote wakeup enable */ + +/* pre-shifted values for HCFS */ +# define OHCI_USB_RESET (0 << 6) +# define OHCI_USB_RESUME (1 << 6) +# define OHCI_USB_OPER (2 << 6) +# define OHCI_USB_SUSPEND (3 << 6) + +/* + * HcCommandStatus (cmdstatus) register masks + */ +#define OHCI_HCR (1 << 0) /* host controller reset */ +#define OHCI_CLF (1 << 1) /* control list filled */ +#define OHCI_BLF (1 << 2) /* bulk list filled */ +#define OHCI_OCR (1 << 3) /* ownership change request */ +#define OHCI_SOC (3 << 16) /* scheduling overrun count */ + +/* + * masks used with interrupt registers: + * HcInterruptStatus (intrstatus) + * HcInterruptEnable (intrenable) + * HcInterruptDisable (intrdisable) + */ +#define OHCI_INTR_SO (1 << 0) /* scheduling overrun */ +#define OHCI_INTR_WDH (1 << 1) /* writeback of done_head */ +#define OHCI_INTR_SF (1 << 2) /* start frame */ +#define OHCI_INTR_RD (1 << 3) /* resume detect */ +#define OHCI_INTR_UE (1 << 4) /* unrecoverable error */ +#define OHCI_INTR_FNO (1 << 5) /* frame number overflow */ +#define OHCI_INTR_RHSC (1 << 6) /* root hub status change */ +#define OHCI_INTR_OC (1 << 30) /* ownership change */ +#define OHCI_INTR_MIE (1 << 31) /* master interrupt enable */ + + +/* OHCI ROOT HUB REGISTER MASKS */ + +/* roothub.portstatus [i] bits */ +#define RH_PS_CCS 0x00000001 /* current connect status */ +#define RH_PS_PES 0x00000002 /* port enable status*/ +#define RH_PS_PSS 0x00000004 /* port suspend status */ +#define RH_PS_POCI 0x00000008 /* port over current indicator */ +#define RH_PS_PRS 0x00000010 /* port reset status */ +#define RH_PS_PPS 0x00000100 /* port power status */ +#define RH_PS_LSDA 0x00000200 /* low speed device attached */ +#define RH_PS_CSC 0x00010000 /* connect status change */ +#define RH_PS_PESC 0x00020000 /* port enable status change */ +#define RH_PS_PSSC 0x00040000 /* port suspend status change */ +#define RH_PS_OCIC 0x00080000 /* over current indicator change */ +#define RH_PS_PRSC 0x00100000 /* port reset status change */ + +/* roothub.status bits */ +#define RH_HS_LPS 0x00000001 /* local power status */ +#define RH_HS_OCI 0x00000002 /* over current indicator */ +#define RH_HS_DRWE 0x00008000 /* device remote wakeup enable */ +#define RH_HS_LPSC 0x00010000 /* local power status change */ +#define RH_HS_OCIC 0x00020000 /* over current indicator change */ +#define RH_HS_CRWE 0x80000000 /* clear remote wakeup enable */ + +/* roothub.b masks */ +#define RH_B_DR 0x0000ffff /* device removable flags */ +#define RH_B_PPCM 0xffff0000 /* port power control mask */ + +/* roothub.a masks */ +#define RH_A_NDP (0xff << 0) /* number of downstream ports */ +#define RH_A_PSM (1 << 8) /* power switching mode */ +#define RH_A_NPS (1 << 9) /* no power switching */ +#define RH_A_DT (1 << 10) /* device type (mbz) */ +#define RH_A_OCPM (1 << 11) /* over current protection mode */ +#define RH_A_NOCP (1 << 12) /* no over current protection */ +#define RH_A_POTPGT (0xff << 24) /* power on to power good time */ + + +/* hcd-private per-urb state */ +typedef struct urb_priv { + struct ed *ed; + u16 length; // # tds in this request + u16 td_cnt; // tds already serviced + struct list_head pending; + struct td *td[]; // all TDs in this request + +} urb_priv_t; + +#define TD_HASH_SIZE 64 /* power'o'two */ +// sizeof (struct td) ~= 64 == 2^6 ... +#define TD_HASH_FUNC(td_dma) ((td_dma ^ (td_dma >> 6)) % TD_HASH_SIZE) + + +/* + * This is the full ohci controller description + * + * Note how the "proper" USB information is just + * a subset of what the full implementation needs. (Linus) + */ + +enum ohci_rh_state { + OHCI_RH_HALTED, + OHCI_RH_SUSPENDED, + OHCI_RH_RUNNING +}; + +struct ohci_hcd { + spinlock_t lock; + + /* + * I/O memory used to communicate with the HC (dma-consistent) + */ + struct ohci_regs __iomem *regs; + + /* + * main memory used to communicate with the HC (dma-consistent). + * hcd adds to schedule for a live hc any time, but removals finish + * only at the start of the next frame. + */ + struct ohci_hcca *hcca; + dma_addr_t hcca_dma; + + struct ed *ed_rm_list; /* to be removed */ + + struct ed *ed_bulktail; /* last in bulk list */ + struct ed *ed_controltail; /* last in ctrl list */ + struct ed *periodic [NUM_INTS]; /* shadow int_table */ + + void (*start_hnp)(struct ohci_hcd *ohci); + + /* + * memory management for queue data structures + * + * @td_cache and @ed_cache are %NULL if &usb_hcd.localmem_pool is used. + */ + struct dma_pool *td_cache; + struct dma_pool *ed_cache; + struct td *td_hash [TD_HASH_SIZE]; + struct td *dl_start, *dl_end; /* the done list */ + struct list_head pending; + struct list_head eds_in_use; /* all EDs with at least 1 TD */ + + /* + * driver state + */ + enum ohci_rh_state rh_state; + int num_ports; + int load [NUM_INTS]; + u32 hc_control; /* copy of hc control reg */ + unsigned long next_statechange; /* suspend/resume */ + u32 fminterval; /* saved register */ + unsigned autostop:1; /* rh auto stopping/stopped */ + unsigned working:1; + unsigned restart_work:1; + + unsigned long flags; /* for HC bugs */ +#define OHCI_QUIRK_AMD756 0x01 /* erratum #4 */ +#define OHCI_QUIRK_SUPERIO 0x02 /* natsemi */ +#define OHCI_QUIRK_INITRESET 0x04 /* SiS, OPTi, ... */ +#define OHCI_QUIRK_BE_DESC 0x08 /* BE descriptors */ +#define OHCI_QUIRK_BE_MMIO 0x10 /* BE registers */ +#define OHCI_QUIRK_ZFMICRO 0x20 /* Compaq ZFMicro chipset*/ +#define OHCI_QUIRK_NEC 0x40 /* lost interrupts */ +#define OHCI_QUIRK_FRAME_NO 0x80 /* no big endian frame_no shift */ +#define OHCI_QUIRK_HUB_POWER 0x100 /* distrust firmware power/oc setup */ +#define OHCI_QUIRK_AMD_PLL 0x200 /* AMD PLL quirk*/ +#define OHCI_QUIRK_AMD_PREFETCH 0x400 /* pre-fetch for ISO transfer */ +#define OHCI_QUIRK_GLOBAL_SUSPEND 0x800 /* must suspend ports */ +#define OHCI_QUIRK_QEMU 0x1000 /* relax timing expectations */ + + // there are also chip quirks/bugs in init logic + + unsigned prev_frame_no; + unsigned wdh_cnt, prev_wdh_cnt; + u32 prev_donehead; + struct timer_list io_watchdog; + + struct work_struct nec_work; /* Worker for NEC quirk */ + + struct dentry *debug_dir; + + /* platform-specific data -- must come last */ + unsigned long priv[] __aligned(sizeof(s64)); + +}; + +#ifdef CONFIG_USB_PCI +static inline int quirk_nec(struct ohci_hcd *ohci) +{ + return ohci->flags & OHCI_QUIRK_NEC; +} +static inline int quirk_zfmicro(struct ohci_hcd *ohci) +{ + return ohci->flags & OHCI_QUIRK_ZFMICRO; +} +static inline int quirk_amdiso(struct ohci_hcd *ohci) +{ + return ohci->flags & OHCI_QUIRK_AMD_PLL; +} +static inline int quirk_amdprefetch(struct ohci_hcd *ohci) +{ + return ohci->flags & OHCI_QUIRK_AMD_PREFETCH; +} +#else +static inline int quirk_nec(struct ohci_hcd *ohci) +{ + return 0; +} +static inline int quirk_zfmicro(struct ohci_hcd *ohci) +{ + return 0; +} +static inline int quirk_amdiso(struct ohci_hcd *ohci) +{ + return 0; +} +static inline int quirk_amdprefetch(struct ohci_hcd *ohci) +{ + return 0; +} +#endif + +/* convert between an hcd pointer and the corresponding ohci_hcd */ +static inline struct ohci_hcd *hcd_to_ohci (struct usb_hcd *hcd) +{ + return (struct ohci_hcd *) (hcd->hcd_priv); +} +static inline struct usb_hcd *ohci_to_hcd (const struct ohci_hcd *ohci) +{ + return container_of ((void *) ohci, struct usb_hcd, hcd_priv); +} + +/*-------------------------------------------------------------------------*/ + +#define ohci_dbg(ohci, fmt, args...) \ + dev_dbg (ohci_to_hcd(ohci)->self.controller , fmt , ## args ) +#define ohci_err(ohci, fmt, args...) \ + dev_err (ohci_to_hcd(ohci)->self.controller , fmt , ## args ) +#define ohci_info(ohci, fmt, args...) \ + dev_info (ohci_to_hcd(ohci)->self.controller , fmt , ## args ) +#define ohci_warn(ohci, fmt, args...) \ + dev_warn (ohci_to_hcd(ohci)->self.controller , fmt , ## args ) + +/*-------------------------------------------------------------------------*/ + +/* + * While most USB host controllers implement their registers and + * in-memory communication descriptors in little-endian format, + * a minority (notably the IBM STB04XXX and the Motorola MPC5200 + * processors) implement them in big endian format. + * + * In addition some more exotic implementations like the Toshiba + * Spider (aka SCC) cell southbridge are "mixed" endian, that is, + * they have a different endianness for registers vs. in-memory + * descriptors. + * + * This attempts to support either format at compile time without a + * runtime penalty, or both formats with the additional overhead + * of checking a flag bit. + * + * That leads to some tricky Kconfig rules howevber. There are + * different defaults based on some arch/ppc platforms, though + * the basic rules are: + * + * Controller type Kconfig options needed + * --------------- ---------------------- + * little endian CONFIG_USB_OHCI_LITTLE_ENDIAN + * + * fully big endian CONFIG_USB_OHCI_BIG_ENDIAN_DESC _and_ + * CONFIG_USB_OHCI_BIG_ENDIAN_MMIO + * + * mixed endian CONFIG_USB_OHCI_LITTLE_ENDIAN _and_ + * CONFIG_USB_OHCI_BIG_ENDIAN_{MMIO,DESC} + * + * (If you have a mixed endian controller, you -must- also define + * CONFIG_USB_OHCI_LITTLE_ENDIAN or things will not work when building + * both your mixed endian and a fully big endian controller support in + * the same kernel image). + */ + +#ifdef CONFIG_USB_OHCI_BIG_ENDIAN_DESC +#ifdef CONFIG_USB_OHCI_LITTLE_ENDIAN +#define big_endian_desc(ohci) (ohci->flags & OHCI_QUIRK_BE_DESC) +#else +#define big_endian_desc(ohci) 1 /* only big endian */ +#endif +#else +#define big_endian_desc(ohci) 0 /* only little endian */ +#endif + +#ifdef CONFIG_USB_OHCI_BIG_ENDIAN_MMIO +#ifdef CONFIG_USB_OHCI_LITTLE_ENDIAN +#define big_endian_mmio(ohci) (ohci->flags & OHCI_QUIRK_BE_MMIO) +#else +#define big_endian_mmio(ohci) 1 /* only big endian */ +#endif +#else +#define big_endian_mmio(ohci) 0 /* only little endian */ +#endif + +/* + * Big-endian read/write functions are arch-specific. + * Other arches can be added if/when they're needed. + * + */ +static inline unsigned int _ohci_readl (const struct ohci_hcd *ohci, + __hc32 __iomem * regs) +{ +#ifdef CONFIG_USB_OHCI_BIG_ENDIAN_MMIO + return big_endian_mmio(ohci) ? + readl_be (regs) : + readl (regs); +#else + return readl (regs); +#endif +} + +static inline void _ohci_writel (const struct ohci_hcd *ohci, + const unsigned int val, __hc32 __iomem *regs) +{ +#ifdef CONFIG_USB_OHCI_BIG_ENDIAN_MMIO + big_endian_mmio(ohci) ? + writel_be (val, regs) : + writel (val, regs); +#else + writel (val, regs); +#endif +} + +#define ohci_readl(o,r) _ohci_readl(o,r) +#define ohci_writel(o,v,r) _ohci_writel(o,v,r) + + +/*-------------------------------------------------------------------------*/ + +/* cpu to ohci */ +static inline __hc16 cpu_to_hc16 (const struct ohci_hcd *ohci, const u16 x) +{ + return big_endian_desc(ohci) ? + (__force __hc16)cpu_to_be16(x) : + (__force __hc16)cpu_to_le16(x); +} + +static inline __hc16 cpu_to_hc16p (const struct ohci_hcd *ohci, const u16 *x) +{ + return big_endian_desc(ohci) ? + cpu_to_be16p(x) : + cpu_to_le16p(x); +} + +static inline __hc32 cpu_to_hc32 (const struct ohci_hcd *ohci, const u32 x) +{ + return big_endian_desc(ohci) ? + (__force __hc32)cpu_to_be32(x) : + (__force __hc32)cpu_to_le32(x); +} + +static inline __hc32 cpu_to_hc32p (const struct ohci_hcd *ohci, const u32 *x) +{ + return big_endian_desc(ohci) ? + cpu_to_be32p(x) : + cpu_to_le32p(x); +} + +/* ohci to cpu */ +static inline u16 hc16_to_cpu (const struct ohci_hcd *ohci, const __hc16 x) +{ + return big_endian_desc(ohci) ? + be16_to_cpu((__force __be16)x) : + le16_to_cpu((__force __le16)x); +} + +static inline u16 hc16_to_cpup (const struct ohci_hcd *ohci, const __hc16 *x) +{ + return big_endian_desc(ohci) ? + be16_to_cpup((__force __be16 *)x) : + le16_to_cpup((__force __le16 *)x); +} + +static inline u32 hc32_to_cpu (const struct ohci_hcd *ohci, const __hc32 x) +{ + return big_endian_desc(ohci) ? + be32_to_cpu((__force __be32)x) : + le32_to_cpu((__force __le32)x); +} + +static inline u32 hc32_to_cpup (const struct ohci_hcd *ohci, const __hc32 *x) +{ + return big_endian_desc(ohci) ? + be32_to_cpup((__force __be32 *)x) : + le32_to_cpup((__force __le32 *)x); +} + +/*-------------------------------------------------------------------------*/ + +/* + * The HCCA frame number is 16 bits, but is accessed as 32 bits since not all + * hardware handles 16 bit reads. Depending on the SoC implementation, the + * frame number can wind up in either bits [31:16] (default) or + * [15:0] (OHCI_QUIRK_FRAME_NO) on big endian hosts. + * + * Somewhat similarly, the 16-bit PSW fields in a transfer descriptor are + * reordered on BE. + */ + +static inline u16 ohci_frame_no(const struct ohci_hcd *ohci) +{ + u32 tmp; + if (big_endian_desc(ohci)) { + tmp = be32_to_cpup((__force __be32 *)&ohci->hcca->frame_no); + if (!(ohci->flags & OHCI_QUIRK_FRAME_NO)) + tmp >>= 16; + } else + tmp = le32_to_cpup((__force __le32 *)&ohci->hcca->frame_no); + + return (u16)tmp; +} + +static inline __hc16 *ohci_hwPSWp(const struct ohci_hcd *ohci, + const struct td *td, int index) +{ + return (__hc16 *)(big_endian_desc(ohci) ? + &td->hwPSW[index ^ 1] : &td->hwPSW[index]); +} + +static inline u16 ohci_hwPSW(const struct ohci_hcd *ohci, + const struct td *td, int index) +{ + return hc16_to_cpup(ohci, ohci_hwPSWp(ohci, td, index)); +} + +/*-------------------------------------------------------------------------*/ + +#define FI 0x2edf /* 12000 bits per frame (-1) */ +#define FSMP(fi) (0x7fff & ((6 * ((fi) - 210)) / 7)) +#define FIT (1 << 31) +#define LSTHRESH 0x628 /* lowspeed bit threshold */ + +static inline void periodic_reinit (struct ohci_hcd *ohci) +{ + u32 fi = ohci->fminterval & 0x03fff; + u32 fit = ohci_readl(ohci, &ohci->regs->fminterval) & FIT; + + ohci_writel (ohci, (fit ^ FIT) | ohci->fminterval, + &ohci->regs->fminterval); + ohci_writel (ohci, ((9 * fi) / 10) & 0x3fff, + &ohci->regs->periodicstart); +} + +/* AMD-756 (D2 rev) reports corrupt register contents in some cases. + * The erratum (#4) description is incorrect. AMD's workaround waits + * till some bits (mostly reserved) are clear; ok for all revs. + */ +#define read_roothub(hc, register, mask) ({ \ + u32 temp = ohci_readl (hc, &hc->regs->roothub.register); \ + if (temp == -1) \ + hc->rh_state = OHCI_RH_HALTED; \ + else if (hc->flags & OHCI_QUIRK_AMD756) \ + while (temp & mask) \ + temp = ohci_readl (hc, &hc->regs->roothub.register); \ + temp; }) + +static inline u32 roothub_a (struct ohci_hcd *hc) + { return read_roothub (hc, a, 0xfc0fe000); } +static inline u32 roothub_b (struct ohci_hcd *hc) + { return ohci_readl (hc, &hc->regs->roothub.b); } +static inline u32 roothub_status (struct ohci_hcd *hc) + { return ohci_readl (hc, &hc->regs->roothub.status); } +static inline u32 roothub_portstatus (struct ohci_hcd *hc, int i) + { return read_roothub (hc, portstatus [i], 0xffe0fce0); } + +/* Declarations of things exported for use by ohci platform drivers */ + +struct ohci_driver_overrides { + const char *product_desc; + size_t extra_priv_size; + int (*reset)(struct usb_hcd *hcd); +}; + +extern void ohci_init_driver(struct hc_driver *drv, + const struct ohci_driver_overrides *over); +extern int ohci_restart(struct ohci_hcd *ohci); +extern int ohci_setup(struct usb_hcd *hcd); +extern int ohci_suspend(struct usb_hcd *hcd, bool do_wakeup); +extern int ohci_resume(struct usb_hcd *hcd, bool hibernated); +extern int ohci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, + u16 wIndex, char *buf, u16 wLength); +extern int ohci_hub_status_data(struct usb_hcd *hcd, char *buf); |