diff options
Diffstat (limited to '')
| -rw-r--r-- | drivers/usb/serial/cyberjack.c | 425 |
1 files changed, 425 insertions, 0 deletions
diff --git a/drivers/usb/serial/cyberjack.c b/drivers/usb/serial/cyberjack.c new file mode 100644 index 000000000..2e4090896 --- /dev/null +++ b/drivers/usb/serial/cyberjack.c @@ -0,0 +1,425 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * REINER SCT cyberJack pinpad/e-com USB Chipcard Reader Driver + * + * Copyright (C) 2001 REINER SCT + * Author: Matthias Bruestle + * + * Contact: support@reiner-sct.com (see MAINTAINERS) + * + * This program is largely derived from work by the linux-usb group + * and associated source files. Please see the usb/serial files for + * individual credits and copyrights. + * + * Thanks to Greg Kroah-Hartman (greg@kroah.com) for his help and + * patience. + * + * In case of problems, please write to the contact e-mail address + * mentioned above. + * + * Please note that later models of the cyberjack reader family are + * supported by a libusb-based userspace device driver. + * + * Homepage: http://www.reiner-sct.de/support/treiber_cyberjack.php#linux + */ + + +#include <linux/kernel.h> +#include <linux/errno.h> +#include <linux/slab.h> +#include <linux/tty.h> +#include <linux/tty_driver.h> +#include <linux/tty_flip.h> +#include <linux/module.h> +#include <linux/spinlock.h> +#include <linux/uaccess.h> +#include <linux/usb.h> +#include <linux/usb/serial.h> + +#define CYBERJACK_LOCAL_BUF_SIZE 32 + +#define DRIVER_AUTHOR "Matthias Bruestle" +#define DRIVER_DESC "REINER SCT cyberJack pinpad/e-com USB Chipcard Reader Driver" + + +#define CYBERJACK_VENDOR_ID 0x0C4B +#define CYBERJACK_PRODUCT_ID 0x0100 + +/* Function prototypes */ +static int cyberjack_port_probe(struct usb_serial_port *port); +static int cyberjack_port_remove(struct usb_serial_port *port); +static int cyberjack_open(struct tty_struct *tty, + struct usb_serial_port *port); +static void cyberjack_close(struct usb_serial_port *port); +static int cyberjack_write(struct tty_struct *tty, + struct usb_serial_port *port, const unsigned char *buf, int count); +static int cyberjack_write_room(struct tty_struct *tty); +static void cyberjack_read_int_callback(struct urb *urb); +static void cyberjack_read_bulk_callback(struct urb *urb); +static void cyberjack_write_bulk_callback(struct urb *urb); + +static const struct usb_device_id id_table[] = { + { USB_DEVICE(CYBERJACK_VENDOR_ID, CYBERJACK_PRODUCT_ID) }, + { } /* Terminating entry */ +}; + +MODULE_DEVICE_TABLE(usb, id_table); + +static struct usb_serial_driver cyberjack_device = { + .driver = { + .owner = THIS_MODULE, + .name = "cyberjack", + }, + .description = "Reiner SCT Cyberjack USB card reader", + .id_table = id_table, + .num_ports = 1, + .num_bulk_out = 1, + .port_probe = cyberjack_port_probe, + .port_remove = cyberjack_port_remove, + .open = cyberjack_open, + .close = cyberjack_close, + .write = cyberjack_write, + .write_room = cyberjack_write_room, + .read_int_callback = cyberjack_read_int_callback, + .read_bulk_callback = cyberjack_read_bulk_callback, + .write_bulk_callback = cyberjack_write_bulk_callback, +}; + +static struct usb_serial_driver * const serial_drivers[] = { + &cyberjack_device, NULL +}; + +struct cyberjack_private { + spinlock_t lock; /* Lock for SMP */ + short rdtodo; /* Bytes still to read */ + unsigned char wrbuf[5*64]; /* Buffer for collecting data to write */ + short wrfilled; /* Overall data size we already got */ + short wrsent; /* Data already sent */ +}; + +static int cyberjack_port_probe(struct usb_serial_port *port) +{ + struct cyberjack_private *priv; + int result; + + priv = kmalloc(sizeof(struct cyberjack_private), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + spin_lock_init(&priv->lock); + priv->rdtodo = 0; + priv->wrfilled = 0; + priv->wrsent = 0; + + usb_set_serial_port_data(port, priv); + + result = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL); + if (result) + dev_err(&port->dev, "usb_submit_urb(read int) failed\n"); + + return 0; +} + +static int cyberjack_port_remove(struct usb_serial_port *port) +{ + struct cyberjack_private *priv; + + usb_kill_urb(port->interrupt_in_urb); + + priv = usb_get_serial_port_data(port); + kfree(priv); + + return 0; +} + +static int cyberjack_open(struct tty_struct *tty, + struct usb_serial_port *port) +{ + struct cyberjack_private *priv; + unsigned long flags; + + dev_dbg(&port->dev, "%s - usb_clear_halt\n", __func__); + usb_clear_halt(port->serial->dev, port->write_urb->pipe); + + priv = usb_get_serial_port_data(port); + spin_lock_irqsave(&priv->lock, flags); + priv->rdtodo = 0; + priv->wrfilled = 0; + priv->wrsent = 0; + spin_unlock_irqrestore(&priv->lock, flags); + + return 0; +} + +static void cyberjack_close(struct usb_serial_port *port) +{ + usb_kill_urb(port->write_urb); + usb_kill_urb(port->read_urb); +} + +static int cyberjack_write(struct tty_struct *tty, + struct usb_serial_port *port, const unsigned char *buf, int count) +{ + struct device *dev = &port->dev; + struct cyberjack_private *priv = usb_get_serial_port_data(port); + unsigned long flags; + int result; + int wrexpected; + + if (count == 0) { + dev_dbg(dev, "%s - write request of 0 bytes\n", __func__); + return 0; + } + + if (!test_and_clear_bit(0, &port->write_urbs_free)) { + dev_dbg(dev, "%s - already writing\n", __func__); + return 0; + } + + spin_lock_irqsave(&priv->lock, flags); + + if (count+priv->wrfilled > sizeof(priv->wrbuf)) { + /* To much data for buffer. Reset buffer. */ + priv->wrfilled = 0; + spin_unlock_irqrestore(&priv->lock, flags); + set_bit(0, &port->write_urbs_free); + return 0; + } + + /* Copy data */ + memcpy(priv->wrbuf + priv->wrfilled, buf, count); + + usb_serial_debug_data(dev, __func__, count, priv->wrbuf + priv->wrfilled); + priv->wrfilled += count; + + if (priv->wrfilled >= 3) { + wrexpected = ((int)priv->wrbuf[2]<<8)+priv->wrbuf[1]+3; + dev_dbg(dev, "%s - expected data: %d\n", __func__, wrexpected); + } else + wrexpected = sizeof(priv->wrbuf); + + if (priv->wrfilled >= wrexpected) { + /* We have enough data to begin transmission */ + int length; + + dev_dbg(dev, "%s - transmitting data (frame 1)\n", __func__); + length = (wrexpected > port->bulk_out_size) ? + port->bulk_out_size : wrexpected; + + memcpy(port->write_urb->transfer_buffer, priv->wrbuf, length); + priv->wrsent = length; + + /* set up our urb */ + port->write_urb->transfer_buffer_length = length; + + /* send the data out the bulk port */ + result = usb_submit_urb(port->write_urb, GFP_ATOMIC); + if (result) { + dev_err(&port->dev, + "%s - failed submitting write urb, error %d\n", + __func__, result); + /* Throw away data. No better idea what to do with it. */ + priv->wrfilled = 0; + priv->wrsent = 0; + spin_unlock_irqrestore(&priv->lock, flags); + set_bit(0, &port->write_urbs_free); + return 0; + } + + dev_dbg(dev, "%s - priv->wrsent=%d\n", __func__, priv->wrsent); + dev_dbg(dev, "%s - priv->wrfilled=%d\n", __func__, priv->wrfilled); + + if (priv->wrsent >= priv->wrfilled) { + dev_dbg(dev, "%s - buffer cleaned\n", __func__); + memset(priv->wrbuf, 0, sizeof(priv->wrbuf)); + priv->wrfilled = 0; + priv->wrsent = 0; + } + } + + spin_unlock_irqrestore(&priv->lock, flags); + + return count; +} + +static int cyberjack_write_room(struct tty_struct *tty) +{ + /* FIXME: .... */ + return CYBERJACK_LOCAL_BUF_SIZE; +} + +static void cyberjack_read_int_callback(struct urb *urb) +{ + struct usb_serial_port *port = urb->context; + struct cyberjack_private *priv = usb_get_serial_port_data(port); + struct device *dev = &port->dev; + unsigned char *data = urb->transfer_buffer; + int status = urb->status; + unsigned long flags; + int result; + + /* the urb might have been killed. */ + if (status) + return; + + usb_serial_debug_data(dev, __func__, urb->actual_length, data); + + /* React only to interrupts signaling a bulk_in transfer */ + if (urb->actual_length == 4 && data[0] == 0x01) { + short old_rdtodo; + + /* This is a announcement of coming bulk_ins. */ + unsigned short size = ((unsigned short)data[3]<<8)+data[2]+3; + + spin_lock_irqsave(&priv->lock, flags); + + old_rdtodo = priv->rdtodo; + + if (old_rdtodo > SHRT_MAX - size) { + dev_dbg(dev, "Too many bulk_in urbs to do.\n"); + spin_unlock_irqrestore(&priv->lock, flags); + goto resubmit; + } + + /* "+=" is probably more fault tolerant than "=" */ + priv->rdtodo += size; + + dev_dbg(dev, "%s - rdtodo: %d\n", __func__, priv->rdtodo); + + spin_unlock_irqrestore(&priv->lock, flags); + + if (!old_rdtodo) { + result = usb_submit_urb(port->read_urb, GFP_ATOMIC); + if (result) + dev_err(dev, "%s - failed resubmitting read urb, error %d\n", + __func__, result); + dev_dbg(dev, "%s - usb_submit_urb(read urb)\n", __func__); + } + } + +resubmit: + result = usb_submit_urb(port->interrupt_in_urb, GFP_ATOMIC); + if (result) + dev_err(&port->dev, "usb_submit_urb(read int) failed\n"); + dev_dbg(dev, "%s - usb_submit_urb(int urb)\n", __func__); +} + +static void cyberjack_read_bulk_callback(struct urb *urb) +{ + struct usb_serial_port *port = urb->context; + struct cyberjack_private *priv = usb_get_serial_port_data(port); + struct device *dev = &port->dev; + unsigned char *data = urb->transfer_buffer; + unsigned long flags; + short todo; + int result; + int status = urb->status; + + usb_serial_debug_data(dev, __func__, urb->actual_length, data); + if (status) { + dev_dbg(dev, "%s - nonzero read bulk status received: %d\n", + __func__, status); + return; + } + + if (urb->actual_length) { + tty_insert_flip_string(&port->port, data, urb->actual_length); + tty_flip_buffer_push(&port->port); + } + + spin_lock_irqsave(&priv->lock, flags); + + /* Reduce urbs to do by one. */ + priv->rdtodo -= urb->actual_length; + /* Just to be sure */ + if (priv->rdtodo < 0) + priv->rdtodo = 0; + todo = priv->rdtodo; + + spin_unlock_irqrestore(&priv->lock, flags); + + dev_dbg(dev, "%s - rdtodo: %d\n", __func__, todo); + + /* Continue to read if we have still urbs to do. */ + if (todo /* || (urb->actual_length==port->bulk_in_endpointAddress)*/) { + result = usb_submit_urb(port->read_urb, GFP_ATOMIC); + if (result) + dev_err(dev, "%s - failed resubmitting read urb, error %d\n", + __func__, result); + dev_dbg(dev, "%s - usb_submit_urb(read urb)\n", __func__); + } +} + +static void cyberjack_write_bulk_callback(struct urb *urb) +{ + struct usb_serial_port *port = urb->context; + struct cyberjack_private *priv = usb_get_serial_port_data(port); + struct device *dev = &port->dev; + int status = urb->status; + unsigned long flags; + bool resubmitted = false; + + if (status) { + dev_dbg(dev, "%s - nonzero write bulk status received: %d\n", + __func__, status); + set_bit(0, &port->write_urbs_free); + return; + } + + spin_lock_irqsave(&priv->lock, flags); + + /* only do something if we have more data to send */ + if (priv->wrfilled) { + int length, blksize, result; + + dev_dbg(dev, "%s - transmitting data (frame n)\n", __func__); + + length = ((priv->wrfilled - priv->wrsent) > port->bulk_out_size) ? + port->bulk_out_size : (priv->wrfilled - priv->wrsent); + + memcpy(port->write_urb->transfer_buffer, + priv->wrbuf + priv->wrsent, length); + priv->wrsent += length; + + /* set up our urb */ + port->write_urb->transfer_buffer_length = length; + + /* send the data out the bulk port */ + result = usb_submit_urb(port->write_urb, GFP_ATOMIC); + if (result) { + dev_err(dev, "%s - failed submitting write urb, error %d\n", + __func__, result); + /* Throw away data. No better idea what to do with it. */ + priv->wrfilled = 0; + priv->wrsent = 0; + goto exit; + } + + resubmitted = true; + + dev_dbg(dev, "%s - priv->wrsent=%d\n", __func__, priv->wrsent); + dev_dbg(dev, "%s - priv->wrfilled=%d\n", __func__, priv->wrfilled); + + blksize = ((int)priv->wrbuf[2]<<8)+priv->wrbuf[1]+3; + + if (priv->wrsent >= priv->wrfilled || + priv->wrsent >= blksize) { + dev_dbg(dev, "%s - buffer cleaned\n", __func__); + memset(priv->wrbuf, 0, sizeof(priv->wrbuf)); + priv->wrfilled = 0; + priv->wrsent = 0; + } + } + +exit: + spin_unlock_irqrestore(&priv->lock, flags); + if (!resubmitted) + set_bit(0, &port->write_urbs_free); + usb_serial_port_softint(port); +} + +module_usb_serial_driver(serial_drivers, id_table); + +MODULE_AUTHOR(DRIVER_AUTHOR); +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_LICENSE("GPL"); |