diff options
Diffstat (limited to '')
| -rw-r--r-- | drivers/usb/serial/metro-usb.c | 374 |
1 files changed, 374 insertions, 0 deletions
diff --git a/drivers/usb/serial/metro-usb.c b/drivers/usb/serial/metro-usb.c new file mode 100644 index 000000000..e63cea02c --- /dev/null +++ b/drivers/usb/serial/metro-usb.c @@ -0,0 +1,374 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + Some of this code is credited to Linux USB open source files that are + distributed with Linux. + + Copyright: 2007 Metrologic Instruments. All rights reserved. + Copyright: 2011 Azimut Ltd. <http://azimutrzn.ru/> +*/ + +#include <linux/kernel.h> +#include <linux/tty.h> +#include <linux/module.h> +#include <linux/usb.h> +#include <linux/errno.h> +#include <linux/slab.h> +#include <linux/tty_driver.h> +#include <linux/tty_flip.h> +#include <linux/moduleparam.h> +#include <linux/spinlock.h> +#include <linux/uaccess.h> +#include <linux/usb/serial.h> + +#define DRIVER_DESC "Metrologic Instruments Inc. - USB-POS driver" + +/* Product information. */ +#define FOCUS_VENDOR_ID 0x0C2E +#define FOCUS_PRODUCT_ID_BI 0x0720 +#define FOCUS_PRODUCT_ID_UNI 0x0700 + +#define METROUSB_SET_REQUEST_TYPE 0x40 +#define METROUSB_SET_MODEM_CTRL_REQUEST 10 +#define METROUSB_SET_BREAK_REQUEST 0x40 +#define METROUSB_MCR_NONE 0x08 /* Deactivate DTR and RTS. */ +#define METROUSB_MCR_RTS 0x0a /* Activate RTS. */ +#define METROUSB_MCR_DTR 0x09 /* Activate DTR. */ +#define WDR_TIMEOUT 5000 /* default urb timeout. */ + +/* Private data structure. */ +struct metrousb_private { + spinlock_t lock; + int throttled; + unsigned long control_state; +}; + +/* Device table list. */ +static const struct usb_device_id id_table[] = { + { USB_DEVICE(FOCUS_VENDOR_ID, FOCUS_PRODUCT_ID_BI) }, + { USB_DEVICE(FOCUS_VENDOR_ID, FOCUS_PRODUCT_ID_UNI) }, + { USB_DEVICE_INTERFACE_CLASS(0x0c2e, 0x0730, 0xff) }, /* MS7820 */ + { }, /* Terminating entry. */ +}; +MODULE_DEVICE_TABLE(usb, id_table); + +/* UNI-Directional mode commands for device configure */ +#define UNI_CMD_OPEN 0x80 +#define UNI_CMD_CLOSE 0xFF + +static int metrousb_is_unidirectional_mode(struct usb_serial *serial) +{ + u16 product_id = le16_to_cpu(serial->dev->descriptor.idProduct); + + return product_id == FOCUS_PRODUCT_ID_UNI; +} + +static int metrousb_calc_num_ports(struct usb_serial *serial, + struct usb_serial_endpoints *epds) +{ + if (metrousb_is_unidirectional_mode(serial)) { + if (epds->num_interrupt_out == 0) { + dev_err(&serial->interface->dev, "interrupt-out endpoint missing\n"); + return -ENODEV; + } + } + + return 1; +} + +static int metrousb_send_unidirectional_cmd(u8 cmd, struct usb_serial_port *port) +{ + int ret; + int actual_len; + u8 *buffer_cmd = NULL; + + if (!metrousb_is_unidirectional_mode(port->serial)) + return 0; + + buffer_cmd = kzalloc(sizeof(cmd), GFP_KERNEL); + if (!buffer_cmd) + return -ENOMEM; + + *buffer_cmd = cmd; + + ret = usb_interrupt_msg(port->serial->dev, + usb_sndintpipe(port->serial->dev, port->interrupt_out_endpointAddress), + buffer_cmd, sizeof(cmd), + &actual_len, USB_CTRL_SET_TIMEOUT); + + kfree(buffer_cmd); + + if (ret < 0) + return ret; + else if (actual_len != sizeof(cmd)) + return -EIO; + return 0; +} + +static void metrousb_read_int_callback(struct urb *urb) +{ + struct usb_serial_port *port = urb->context; + struct metrousb_private *metro_priv = usb_get_serial_port_data(port); + unsigned char *data = urb->transfer_buffer; + int throttled = 0; + int result = 0; + unsigned long flags = 0; + + dev_dbg(&port->dev, "%s\n", __func__); + + switch (urb->status) { + case 0: + /* Success status, read from the port. */ + break; + case -ECONNRESET: + case -ENOENT: + case -ESHUTDOWN: + /* urb has been terminated. */ + dev_dbg(&port->dev, + "%s - urb shutting down, error code=%d\n", + __func__, urb->status); + return; + default: + dev_dbg(&port->dev, + "%s - non-zero urb received, error code=%d\n", + __func__, urb->status); + goto exit; + } + + + /* Set the data read from the usb port into the serial port buffer. */ + if (urb->actual_length) { + /* Loop through the data copying each byte to the tty layer. */ + tty_insert_flip_string(&port->port, data, urb->actual_length); + + /* Force the data to the tty layer. */ + tty_flip_buffer_push(&port->port); + } + + /* Set any port variables. */ + spin_lock_irqsave(&metro_priv->lock, flags); + throttled = metro_priv->throttled; + spin_unlock_irqrestore(&metro_priv->lock, flags); + + if (throttled) + return; +exit: + /* Try to resubmit the urb. */ + result = usb_submit_urb(urb, GFP_ATOMIC); + if (result) + dev_err(&port->dev, + "%s - failed submitting interrupt in urb, error code=%d\n", + __func__, result); +} + +static void metrousb_cleanup(struct usb_serial_port *port) +{ + usb_kill_urb(port->interrupt_in_urb); + + metrousb_send_unidirectional_cmd(UNI_CMD_CLOSE, port); +} + +static int metrousb_open(struct tty_struct *tty, struct usb_serial_port *port) +{ + struct usb_serial *serial = port->serial; + struct metrousb_private *metro_priv = usb_get_serial_port_data(port); + unsigned long flags = 0; + int result = 0; + + /* Set the private data information for the port. */ + spin_lock_irqsave(&metro_priv->lock, flags); + metro_priv->control_state = 0; + metro_priv->throttled = 0; + spin_unlock_irqrestore(&metro_priv->lock, flags); + + /* Clear the urb pipe. */ + usb_clear_halt(serial->dev, port->interrupt_in_urb->pipe); + + /* Start reading from the device */ + usb_fill_int_urb(port->interrupt_in_urb, serial->dev, + usb_rcvintpipe(serial->dev, port->interrupt_in_endpointAddress), + port->interrupt_in_urb->transfer_buffer, + port->interrupt_in_urb->transfer_buffer_length, + metrousb_read_int_callback, port, 1); + result = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL); + + if (result) { + dev_err(&port->dev, + "%s - failed submitting interrupt in urb, error code=%d\n", + __func__, result); + return result; + } + + /* Send activate cmd to device */ + result = metrousb_send_unidirectional_cmd(UNI_CMD_OPEN, port); + if (result) { + dev_err(&port->dev, + "%s - failed to configure device, error code=%d\n", + __func__, result); + goto err_kill_urb; + } + + return 0; + +err_kill_urb: + usb_kill_urb(port->interrupt_in_urb); + + return result; +} + +static int metrousb_set_modem_ctrl(struct usb_serial *serial, unsigned int control_state) +{ + int retval = 0; + unsigned char mcr = METROUSB_MCR_NONE; + + dev_dbg(&serial->dev->dev, "%s - control state = %d\n", + __func__, control_state); + + /* Set the modem control value. */ + if (control_state & TIOCM_DTR) + mcr |= METROUSB_MCR_DTR; + if (control_state & TIOCM_RTS) + mcr |= METROUSB_MCR_RTS; + + /* Send the command to the usb port. */ + retval = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), + METROUSB_SET_REQUEST_TYPE, METROUSB_SET_MODEM_CTRL_REQUEST, + control_state, 0, NULL, 0, WDR_TIMEOUT); + if (retval < 0) + dev_err(&serial->dev->dev, + "%s - set modem ctrl=0x%x failed, error code=%d\n", + __func__, mcr, retval); + + return retval; +} + +static int metrousb_port_probe(struct usb_serial_port *port) +{ + struct metrousb_private *metro_priv; + + metro_priv = kzalloc(sizeof(*metro_priv), GFP_KERNEL); + if (!metro_priv) + return -ENOMEM; + + spin_lock_init(&metro_priv->lock); + + usb_set_serial_port_data(port, metro_priv); + + return 0; +} + +static int metrousb_port_remove(struct usb_serial_port *port) +{ + struct metrousb_private *metro_priv; + + metro_priv = usb_get_serial_port_data(port); + kfree(metro_priv); + + return 0; +} + +static void metrousb_throttle(struct tty_struct *tty) +{ + struct usb_serial_port *port = tty->driver_data; + struct metrousb_private *metro_priv = usb_get_serial_port_data(port); + unsigned long flags = 0; + + /* Set the private information for the port to stop reading data. */ + spin_lock_irqsave(&metro_priv->lock, flags); + metro_priv->throttled = 1; + spin_unlock_irqrestore(&metro_priv->lock, flags); +} + +static int metrousb_tiocmget(struct tty_struct *tty) +{ + unsigned long control_state = 0; + struct usb_serial_port *port = tty->driver_data; + struct metrousb_private *metro_priv = usb_get_serial_port_data(port); + unsigned long flags = 0; + + spin_lock_irqsave(&metro_priv->lock, flags); + control_state = metro_priv->control_state; + spin_unlock_irqrestore(&metro_priv->lock, flags); + + return control_state; +} + +static int metrousb_tiocmset(struct tty_struct *tty, + unsigned int set, unsigned int clear) +{ + struct usb_serial_port *port = tty->driver_data; + struct usb_serial *serial = port->serial; + struct metrousb_private *metro_priv = usb_get_serial_port_data(port); + unsigned long flags = 0; + unsigned long control_state = 0; + + dev_dbg(tty->dev, "%s - set=%d, clear=%d\n", __func__, set, clear); + + spin_lock_irqsave(&metro_priv->lock, flags); + control_state = metro_priv->control_state; + + /* Set the RTS and DTR values. */ + if (set & TIOCM_RTS) + control_state |= TIOCM_RTS; + if (set & TIOCM_DTR) + control_state |= TIOCM_DTR; + if (clear & TIOCM_RTS) + control_state &= ~TIOCM_RTS; + if (clear & TIOCM_DTR) + control_state &= ~TIOCM_DTR; + + metro_priv->control_state = control_state; + spin_unlock_irqrestore(&metro_priv->lock, flags); + return metrousb_set_modem_ctrl(serial, control_state); +} + +static void metrousb_unthrottle(struct tty_struct *tty) +{ + struct usb_serial_port *port = tty->driver_data; + struct metrousb_private *metro_priv = usb_get_serial_port_data(port); + unsigned long flags = 0; + int result = 0; + + /* Set the private information for the port to resume reading data. */ + spin_lock_irqsave(&metro_priv->lock, flags); + metro_priv->throttled = 0; + spin_unlock_irqrestore(&metro_priv->lock, flags); + + /* Submit the urb to read from the port. */ + result = usb_submit_urb(port->interrupt_in_urb, GFP_ATOMIC); + if (result) + dev_err(tty->dev, + "failed submitting interrupt in urb error code=%d\n", + result); +} + +static struct usb_serial_driver metrousb_device = { + .driver = { + .owner = THIS_MODULE, + .name = "metro-usb", + }, + .description = "Metrologic USB to Serial", + .id_table = id_table, + .num_interrupt_in = 1, + .calc_num_ports = metrousb_calc_num_ports, + .open = metrousb_open, + .close = metrousb_cleanup, + .read_int_callback = metrousb_read_int_callback, + .port_probe = metrousb_port_probe, + .port_remove = metrousb_port_remove, + .throttle = metrousb_throttle, + .unthrottle = metrousb_unthrottle, + .tiocmget = metrousb_tiocmget, + .tiocmset = metrousb_tiocmset, +}; + +static struct usb_serial_driver * const serial_drivers[] = { + &metrousb_device, + NULL, +}; + +module_usb_serial_driver(serial_drivers, id_table); + +MODULE_LICENSE("GPL v2"); +MODULE_AUTHOR("Philip Nicastro"); +MODULE_AUTHOR("Aleksey Babahin <tamerlan311@gmail.com>"); +MODULE_DESCRIPTION(DRIVER_DESC); |