summaryrefslogtreecommitdiffstats
path: root/drivers/watchdog/Kconfig
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/watchdog/Kconfig')
-rw-r--r--drivers/watchdog/Kconfig2168
1 files changed, 2168 insertions, 0 deletions
diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
new file mode 100644
index 000000000..01ce3f41c
--- /dev/null
+++ b/drivers/watchdog/Kconfig
@@ -0,0 +1,2168 @@
+# SPDX-License-Identifier: GPL-2.0-only
+
+#
+# Watchdog device configuration
+#
+
+menuconfig WATCHDOG
+ bool "Watchdog Timer Support"
+ help
+ If you say Y here (and to one of the following options) and create a
+ character special file /dev/watchdog with major number 10 and minor
+ number 130 using mknod ("man mknod"), you will get a watchdog, i.e.:
+ subsequently opening the file and then failing to write to it for
+ longer than 1 minute will result in rebooting the machine. This
+ could be useful for a networked machine that needs to come back
+ on-line as fast as possible after a lock-up. There's both a watchdog
+ implementation entirely in software (which can sometimes fail to
+ reboot the machine) and a driver for hardware watchdog boards, which
+ are more robust and can also keep track of the temperature inside
+ your computer. For details, read
+ <file:Documentation/watchdog/watchdog-api.rst> in the kernel source.
+
+ The watchdog is usually used together with the watchdog daemon
+ which is available from
+ <ftp://ibiblio.org/pub/Linux/system/daemons/watchdog/>. This daemon can
+ also monitor NFS connections and can reboot the machine when the process
+ table is full.
+
+ If unsure, say N.
+
+if WATCHDOG
+
+config WATCHDOG_CORE
+ tristate "WatchDog Timer Driver Core"
+ help
+ Say Y here if you want to use the new watchdog timer driver core.
+ This driver provides a framework for all watchdog timer drivers
+ and gives them the /dev/watchdog interface (and later also the
+ sysfs interface).
+
+config WATCHDOG_NOWAYOUT
+ bool "Disable watchdog shutdown on close"
+ help
+ The default watchdog behaviour (which you get if you say N here) is
+ to stop the timer if the process managing it closes the file
+ /dev/watchdog. It's always remotely possible that this process might
+ get killed. If you say Y here, the watchdog cannot be stopped once
+ it has been started.
+
+config WATCHDOG_HANDLE_BOOT_ENABLED
+ bool "Update boot-enabled watchdog until userspace takes over"
+ default y
+ help
+ The default watchdog behaviour (which you get if you say Y here) is
+ to ping watchdog devices that were enabled before the driver has
+ been loaded until control is taken over from userspace using the
+ /dev/watchdog file. If you say N here, the kernel will not update
+ the watchdog on its own. Thus if your userspace does not start fast
+ enough your device will reboot.
+
+config WATCHDOG_OPEN_TIMEOUT
+ int "Timeout value for opening watchdog device"
+ default 0
+ help
+ The maximum time, in seconds, for which the watchdog framework takes
+ care of pinging a hardware watchdog. A value of 0 means infinite. The
+ value set here can be overridden by the commandline parameter
+ "watchdog.open_timeout".
+
+config WATCHDOG_SYSFS
+ bool "Read different watchdog information through sysfs"
+ help
+ Say Y here if you want to enable watchdog device status read through
+ sysfs attributes.
+
+comment "Watchdog Pretimeout Governors"
+
+config WATCHDOG_PRETIMEOUT_GOV
+ bool "Enable watchdog pretimeout governors"
+ depends on WATCHDOG_CORE
+ help
+ The option allows to select watchdog pretimeout governors.
+
+config WATCHDOG_PRETIMEOUT_GOV_SEL
+ tristate
+ depends on WATCHDOG_PRETIMEOUT_GOV
+ default m
+ select WATCHDOG_PRETIMEOUT_GOV_PANIC if WATCHDOG_PRETIMEOUT_GOV_NOOP=n
+
+if WATCHDOG_PRETIMEOUT_GOV
+
+config WATCHDOG_PRETIMEOUT_GOV_NOOP
+ tristate "Noop watchdog pretimeout governor"
+ depends on WATCHDOG_CORE
+ default WATCHDOG_CORE
+ help
+ Noop watchdog pretimeout governor, only an informational
+ message is added to kernel log buffer.
+
+config WATCHDOG_PRETIMEOUT_GOV_PANIC
+ tristate "Panic watchdog pretimeout governor"
+ depends on WATCHDOG_CORE
+ default WATCHDOG_CORE
+ help
+ Panic watchdog pretimeout governor, on watchdog pretimeout
+ event put the kernel into panic.
+
+choice
+ prompt "Default Watchdog Pretimeout Governor"
+ default WATCHDOG_PRETIMEOUT_DEFAULT_GOV_PANIC
+ help
+ This option selects a default watchdog pretimeout governor.
+ The governor takes its action, if a watchdog is capable
+ to report a pretimeout event.
+
+config WATCHDOG_PRETIMEOUT_DEFAULT_GOV_NOOP
+ bool "noop"
+ depends on WATCHDOG_PRETIMEOUT_GOV_NOOP
+ help
+ Use noop watchdog pretimeout governor by default. If noop
+ governor is selected by a user, write a short message to
+ the kernel log buffer and don't do any system changes.
+
+config WATCHDOG_PRETIMEOUT_DEFAULT_GOV_PANIC
+ bool "panic"
+ depends on WATCHDOG_PRETIMEOUT_GOV_PANIC
+ help
+ Use panic watchdog pretimeout governor by default, if
+ a watchdog pretimeout event happens, consider that
+ a watchdog feeder is dead and reboot is unavoidable.
+
+endchoice
+
+endif # WATCHDOG_PRETIMEOUT_GOV
+
+#
+# General Watchdog drivers
+#
+
+comment "Watchdog Device Drivers"
+
+# Architecture Independent
+
+config SOFT_WATCHDOG
+ tristate "Software watchdog"
+ select WATCHDOG_CORE
+ help
+ A software monitoring watchdog. This will fail to reboot your system
+ from some situations that the hardware watchdog will recover
+ from. Equally it's a lot cheaper to install.
+
+ To compile this driver as a module, choose M here: the
+ module will be called softdog.
+
+config SOFT_WATCHDOG_PRETIMEOUT
+ bool "Software watchdog pretimeout governor support"
+ depends on SOFT_WATCHDOG && WATCHDOG_PRETIMEOUT_GOV
+ help
+ Enable this if you want to use pretimeout governors with the software
+ watchdog. Be aware that governors might affect the watchdog because it
+ is purely software, e.g. the panic governor will stall it!
+
+config BD70528_WATCHDOG
+ tristate "ROHM BD70528 PMIC Watchdog"
+ depends on MFD_ROHM_BD70528
+ select WATCHDOG_CORE
+ help
+ Support for the watchdog in the ROHM BD70528 PMIC. Watchdog trigger
+ cause system reset.
+
+ Say Y here to include support for the ROHM BD70528 watchdog.
+ Alternatively say M to compile the driver as a module,
+ which will be called bd70528_wdt.
+
+config DA9052_WATCHDOG
+ tristate "Dialog DA9052 Watchdog"
+ depends on PMIC_DA9052 || COMPILE_TEST
+ select WATCHDOG_CORE
+ help
+ Support for the watchdog in the DA9052 PMIC. Watchdog trigger
+ cause system reset.
+
+ Say Y here to include support for the DA9052 watchdog.
+ Alternatively say M to compile the driver as a module,
+ which will be called da9052_wdt.
+
+config DA9055_WATCHDOG
+ tristate "Dialog Semiconductor DA9055 Watchdog"
+ depends on MFD_DA9055 || COMPILE_TEST
+ select WATCHDOG_CORE
+ help
+ If you say yes here you get support for watchdog on the Dialog
+ Semiconductor DA9055 PMIC.
+
+ This driver can also be built as a module. If so, the module
+ will be called da9055_wdt.
+
+config DA9063_WATCHDOG
+ tristate "Dialog DA9063 Watchdog"
+ depends on MFD_DA9063 || COMPILE_TEST
+ select WATCHDOG_CORE
+ help
+ Support for the watchdog in the DA9063 PMIC.
+
+ This driver can be built as a module. The module name is da9063_wdt.
+
+config DA9062_WATCHDOG
+ tristate "Dialog DA9062/61 Watchdog"
+ depends on MFD_DA9062 || COMPILE_TEST
+ depends on I2C
+ select WATCHDOG_CORE
+ help
+ Support for the watchdog in the DA9062 and DA9061 PMICs.
+
+ This driver can be built as a module. The module name is da9062_wdt.
+
+config GPIO_WATCHDOG
+ tristate "Watchdog device controlled through GPIO-line"
+ depends on OF_GPIO
+ select WATCHDOG_CORE
+ help
+ If you say yes here you get support for watchdog device
+ controlled through GPIO-line.
+
+config GPIO_WATCHDOG_ARCH_INITCALL
+ bool "Register the watchdog as early as possible"
+ depends on GPIO_WATCHDOG=y
+ help
+ In some situations, the default initcall level (module_init)
+ in not early enough in the boot process to avoid the watchdog
+ to be triggered.
+ If you say yes here, the initcall level would be raised to
+ arch_initcall.
+ If in doubt, say N.
+
+config MENF21BMC_WATCHDOG
+ tristate "MEN 14F021P00 BMC Watchdog"
+ depends on MFD_MENF21BMC || COMPILE_TEST
+ depends on I2C
+ select WATCHDOG_CORE
+ help
+ Say Y here to include support for the MEN 14F021P00 BMC Watchdog.
+
+ This driver can also be built as a module. If so the module
+ will be called menf21bmc_wdt.
+
+config MENZ069_WATCHDOG
+ tristate "MEN 16Z069 Watchdog"
+ depends on MCB
+ select WATCHDOG_CORE
+ help
+ Say Y here to include support for the MEN 16Z069 Watchdog.
+
+ This driver can also be built as a module. If so the module
+ will be called menz069_wdt.
+
+config TANGOX_WATCHDOG
+ tristate "Sigma Designs SMP86xx/SMP87xx watchdog"
+ select WATCHDOG_CORE
+ depends on ARCH_TANGO || COMPILE_TEST
+ depends on HAS_IOMEM
+ help
+ Support for the watchdog in Sigma Designs SMP86xx (tango3)
+ and SMP87xx (tango4) family chips.
+
+ This driver can be built as a module. The module name is tangox_wdt.
+
+config WDAT_WDT
+ tristate "ACPI Watchdog Action Table (WDAT)"
+ depends on ACPI
+ select WATCHDOG_CORE
+ select ACPI_WATCHDOG
+ help
+ This driver adds support for systems with ACPI Watchdog Action
+ Table (WDAT) table. Servers typically have this but it can be
+ found on some desktop machines as well. This driver will take
+ over the native iTCO watchdog driver found on many Intel CPUs.
+
+ To compile this driver as module, choose M here: the module will
+ be called wdat_wdt.
+
+config WM831X_WATCHDOG
+ tristate "WM831x watchdog"
+ depends on MFD_WM831X
+ select WATCHDOG_CORE
+ help
+ Support for the watchdog in the WM831x AudioPlus PMICs. When
+ the watchdog triggers the system will be reset.
+
+config WM8350_WATCHDOG
+ tristate "WM8350 watchdog"
+ depends on MFD_WM8350
+ select WATCHDOG_CORE
+ help
+ Support for the watchdog in the WM8350 AudioPlus PMIC. When
+ the watchdog triggers the system will be reset.
+
+config XILINX_WATCHDOG
+ tristate "Xilinx Watchdog timer"
+ depends on HAS_IOMEM
+ select WATCHDOG_CORE
+ help
+ Watchdog driver for the xps_timebase_wdt ip core.
+
+ To compile this driver as a module, choose M here: the
+ module will be called of_xilinx_wdt.
+
+config ZIIRAVE_WATCHDOG
+ tristate "Zodiac RAVE Watchdog Timer"
+ depends on I2C
+ select WATCHDOG_CORE
+ help
+ Watchdog driver for the Zodiac Aerospace RAVE Switch Watchdog
+ Processor.
+
+ To compile this driver as a module, choose M here: the
+ module will be called ziirave_wdt.
+
+config RAVE_SP_WATCHDOG
+ tristate "RAVE SP Watchdog timer"
+ depends on RAVE_SP_CORE
+ depends on NVMEM || !NVMEM
+ select WATCHDOG_CORE
+ help
+ Support for the watchdog on RAVE SP device.
+
+config MLX_WDT
+ tristate "Mellanox Watchdog"
+ depends on MELLANOX_PLATFORM
+ select WATCHDOG_CORE
+ select REGMAP
+ help
+ This is the driver for the hardware watchdog on Mellanox systems.
+ If you are going to use it, say Y here, otherwise N.
+ This driver can be used together with the watchdog daemon.
+ It can also watch your kernel to make sure it doesn't freeze,
+ and if it does, it reboots your system after a certain amount of
+ time.
+
+ To compile this driver as a module, choose M here: the
+ module will be called mlx-wdt.
+
+config SL28CPLD_WATCHDOG
+ tristate "Kontron sl28cpld Watchdog"
+ depends on MFD_SL28CPLD || COMPILE_TEST
+ select WATCHDOG_CORE
+ help
+ Say Y here to include support for the watchdog timer
+ on the Kontron sl28 CPLD.
+
+ To compile this driver as a module, choose M here: the
+ module will be called sl28cpld_wdt.
+
+# ALPHA Architecture
+
+# ARM Architecture
+
+config ARM_SP805_WATCHDOG
+ tristate "ARM SP805 Watchdog"
+ depends on (ARM || ARM64 || COMPILE_TEST) && ARM_AMBA
+ select WATCHDOG_CORE
+ help
+ ARM Primecell SP805 Watchdog timer. This will reboot your system when
+ the timeout is reached.
+
+config ARM_SBSA_WATCHDOG
+ tristate "ARM SBSA Generic Watchdog"
+ depends on ARM64
+ depends on ARM_ARCH_TIMER
+ select WATCHDOG_CORE
+ help
+ ARM SBSA Generic Watchdog has two stage timeouts:
+ the first signal (WS0) is for alerting the system by interrupt,
+ the second one (WS1) is a real hardware reset.
+ More details: ARM DEN0029B - Server Base System Architecture (SBSA)
+
+ This driver can operate ARM SBSA Generic Watchdog as a single stage
+ or a two stages watchdog, it depends on the module parameter "action".
+
+ Note: the maximum timeout in the two stages mode is half of that in
+ the single stage mode.
+
+ To compile this driver as module, choose M here: The module
+ will be called sbsa_gwdt.
+
+config ARMADA_37XX_WATCHDOG
+ tristate "Armada 37xx watchdog"
+ depends on ARCH_MVEBU || COMPILE_TEST
+ depends on HAS_IOMEM
+ select MFD_SYSCON
+ select WATCHDOG_CORE
+ help
+ Say Y here to include support for the watchdog timer found on
+ Marvell Armada 37xx SoCs.
+ To compile this driver as a module, choose M here: the
+ module will be called armada_37xx_wdt.
+
+config ASM9260_WATCHDOG
+ tristate "Alphascale ASM9260 watchdog"
+ depends on MACH_ASM9260 || COMPILE_TEST
+ depends on OF
+ select WATCHDOG_CORE
+ select RESET_CONTROLLER
+ help
+ Watchdog timer embedded into Alphascale asm9260 chips. This will reboot your
+ system when the timeout is reached.
+
+config AT91RM9200_WATCHDOG
+ tristate "AT91RM9200 watchdog"
+ depends on (SOC_AT91RM9200 && MFD_SYSCON) || COMPILE_TEST
+ help
+ Watchdog timer embedded into AT91RM9200 chips. This will reboot your
+ system when the timeout is reached.
+
+config AT91SAM9X_WATCHDOG
+ tristate "AT91SAM9X / AT91CAP9 watchdog"
+ depends on ARCH_AT91 || COMPILE_TEST
+ select WATCHDOG_CORE
+ help
+ Watchdog timer embedded into AT91SAM9X and AT91CAP9 chips. This will
+ reboot your system when the timeout is reached.
+
+config SAMA5D4_WATCHDOG
+ tristate "Atmel SAMA5D4 Watchdog Timer"
+ depends on ARCH_AT91 || COMPILE_TEST
+ select WATCHDOG_CORE
+ help
+ Atmel SAMA5D4 watchdog timer is embedded into SAMA5D4 chips.
+ Its Watchdog Timer Mode Register can be written more than once.
+ This will reboot your system when the timeout is reached.
+
+config CADENCE_WATCHDOG
+ tristate "Cadence Watchdog Timer"
+ depends on HAS_IOMEM
+ select WATCHDOG_CORE
+ help
+ Say Y here if you want to include support for the watchdog
+ timer in the Xilinx Zynq.
+
+config 21285_WATCHDOG
+ tristate "DC21285 watchdog"
+ depends on FOOTBRIDGE
+ help
+ The Intel Footbridge chip contains a built-in watchdog circuit. Say Y
+ here if you wish to use this. Alternatively say M to compile the
+ driver as a module, which will be called wdt285.
+
+ This driver does not work on all machines. In particular, early CATS
+ boards have hardware problems that will cause the machine to simply
+ lock up if the watchdog fires.
+
+ "If in doubt, leave it out" - say N.
+
+config 977_WATCHDOG
+ tristate "NetWinder WB83C977 watchdog"
+ depends on (FOOTBRIDGE && ARCH_NETWINDER) || (ARM && COMPILE_TEST)
+ help
+ Say Y here to include support for the WB977 watchdog included in
+ NetWinder machines. Alternatively say M to compile the driver as
+ a module, which will be called wdt977.
+
+ Not sure? It's safe to say N.
+
+config FTWDT010_WATCHDOG
+ tristate "Faraday Technology FTWDT010 watchdog"
+ depends on ARM || COMPILE_TEST
+ select WATCHDOG_CORE
+ default ARCH_GEMINI
+ help
+ Say Y here if to include support for the Faraday Technology
+ FTWDT010 watchdog timer embedded in the Cortina Systems Gemini
+ family of devices.
+
+ To compile this driver as a module, choose M here: the
+ module will be called ftwdt010_wdt.
+
+config IXP4XX_WATCHDOG
+ tristate "IXP4xx Watchdog"
+ depends on ARCH_IXP4XX
+ help
+ Say Y here if to include support for the watchdog timer
+ in the Intel IXP4xx network processors. This driver can
+ be built as a module by choosing M. The module will
+ be called ixp4xx_wdt.
+
+ Note: The internal IXP4xx watchdog does a soft CPU reset
+ which doesn't reset any peripherals. There are circumstances
+ where the watchdog will fail to reset the board correctly
+ (e.g., if the boot ROM is in an unreadable state).
+
+ Say N if you are unsure.
+
+config S3C2410_WATCHDOG
+ tristate "S3C2410 Watchdog"
+ depends on ARCH_S3C24XX || ARCH_S3C64XX || ARCH_S5PV210 || ARCH_EXYNOS || \
+ COMPILE_TEST
+ select WATCHDOG_CORE
+ select MFD_SYSCON if ARCH_EXYNOS
+ help
+ Watchdog timer block in the Samsung SoCs. This will reboot
+ the system when the timer expires with the watchdog enabled.
+
+ The driver is limited by the speed of the system's PCLK
+ signal, so with reasonably fast systems (PCLK around 50-66MHz)
+ then watchdog intervals of over approximately 20seconds are
+ unavailable.
+
+ The driver can be built as a module by choosing M, and will
+ be called s3c2410_wdt
+
+config SA1100_WATCHDOG
+ tristate "SA1100/PXA2xx watchdog"
+ depends on ARCH_SA1100 || ARCH_PXA
+ help
+ Watchdog timer embedded into SA11x0 and PXA2xx chips. This will
+ reboot your system when timeout is reached.
+
+ NOTE: once enabled, this timer cannot be disabled.
+
+ To compile this driver as a module, choose M here: the
+ module will be called sa1100_wdt.
+
+config DW_WATCHDOG
+ tristate "Synopsys DesignWare watchdog"
+ depends on HAS_IOMEM
+ select WATCHDOG_CORE
+ help
+ Say Y here if to include support for the Synopsys DesignWare
+ watchdog timer found in many chips.
+ To compile this driver as a module, choose M here: the
+ module will be called dw_wdt.
+
+config EP93XX_WATCHDOG
+ tristate "EP93xx Watchdog"
+ depends on ARCH_EP93XX || COMPILE_TEST
+ select WATCHDOG_CORE
+ help
+ Say Y here if to include support for the watchdog timer
+ embedded in the Cirrus Logic EP93xx family of devices.
+
+ To compile this driver as a module, choose M here: the
+ module will be called ep93xx_wdt.
+
+config OMAP_WATCHDOG
+ tristate "OMAP Watchdog"
+ depends on ARCH_OMAP16XX || ARCH_OMAP2PLUS || COMPILE_TEST
+ select WATCHDOG_CORE
+ help
+ Support for TI OMAP1610/OMAP1710/OMAP2420/OMAP3430/OMAP4430 watchdog. Say 'Y'
+ here to enable the OMAP1610/OMAP1710/OMAP2420/OMAP3430/OMAP4430 watchdog timer.
+
+config PNX4008_WATCHDOG
+ tristate "LPC32XX Watchdog"
+ depends on ARCH_LPC32XX || COMPILE_TEST
+ select WATCHDOG_CORE
+ help
+ Say Y here if to include support for the watchdog timer
+ in the LPC32XX processor.
+ This driver can be built as a module by choosing M. The module
+ will be called pnx4008_wdt.
+
+ Say N if you are unsure.
+
+config IOP_WATCHDOG
+ tristate "IOP Watchdog"
+ depends on ARCH_IOP13XX
+ select WATCHDOG_NOWAYOUT if (ARCH_IOP32X || ARCH_IOP33X)
+ help
+ Say Y here if to include support for the watchdog timer
+ in the Intel IOP3XX & IOP13XX I/O Processors. This driver can
+ be built as a module by choosing M. The module will
+ be called iop_wdt.
+
+ Note: The IOP13XX watchdog does an Internal Bus Reset which will
+ affect both cores and the peripherals of the IOP. The ATU-X
+ and/or ATUe configuration registers will remain intact, but if
+ operating as an Root Complex and/or Central Resource, the PCI-X
+ and/or PCIe busses will also be reset. THIS IS A VERY BIG HAMMER.
+
+config DAVINCI_WATCHDOG
+ tristate "DaVinci watchdog"
+ depends on ARCH_DAVINCI || ARCH_KEYSTONE || COMPILE_TEST
+ select WATCHDOG_CORE
+ help
+ Say Y here if to include support for the watchdog timer
+ in the DaVinci DM644x/DM646x or Keystone processors.
+ To compile this driver as a module, choose M here: the
+ module will be called davinci_wdt.
+
+ NOTE: once enabled, this timer cannot be disabled.
+ Say N if you are unsure.
+
+config K3_RTI_WATCHDOG
+ tristate "Texas Instruments K3 RTI watchdog"
+ depends on ARCH_K3 || COMPILE_TEST
+ select WATCHDOG_CORE
+ help
+ Say Y here if you want to include support for the K3 watchdog
+ timer (RTI module) available in the K3 generation of processors.
+
+config ORION_WATCHDOG
+ tristate "Orion watchdog"
+ depends on ARCH_ORION5X || ARCH_DOVE || MACH_DOVE || ARCH_MVEBU || (COMPILE_TEST && !ARCH_EBSA110)
+ depends on ARM
+ select WATCHDOG_CORE
+ help
+ Say Y here if to include support for the watchdog timer
+ in the Marvell Orion5x and Kirkwood ARM SoCs.
+ To compile this driver as a module, choose M here: the
+ module will be called orion_wdt.
+
+config RN5T618_WATCHDOG
+ tristate "Ricoh RN5T618 watchdog"
+ depends on MFD_RN5T618 || COMPILE_TEST
+ select WATCHDOG_CORE
+ help
+ If you say yes here you get support for watchdog on the Ricoh
+ RN5T618 PMIC.
+
+ This driver can also be built as a module. If so, the module
+ will be called rn5t618_wdt.
+
+config SUNXI_WATCHDOG
+ tristate "Allwinner SoCs watchdog support"
+ depends on ARCH_SUNXI || COMPILE_TEST
+ select WATCHDOG_CORE
+ help
+ Say Y here to include support for the watchdog timer
+ in Allwinner SoCs.
+ To compile this driver as a module, choose M here: the
+ module will be called sunxi_wdt.
+
+config COH901327_WATCHDOG
+ bool "ST-Ericsson COH 901 327 watchdog"
+ depends on ARCH_U300 || (ARM && COMMON_CLK && COMPILE_TEST)
+ default y if MACH_U300
+ select WATCHDOG_CORE
+ help
+ Say Y here to include Watchdog timer support for the
+ watchdog embedded into the ST-Ericsson U300 series platforms.
+ This watchdog is used to reset the system and thus cannot be
+ compiled as a module.
+
+config NPCM7XX_WATCHDOG
+ tristate "Nuvoton NPCM750 watchdog"
+ depends on ARCH_NPCM || COMPILE_TEST
+ default y if ARCH_NPCM7XX
+ select WATCHDOG_CORE
+ help
+ Say Y here to include Watchdog timer support for the
+ watchdog embedded into the NPCM7xx.
+ This watchdog is used to reset the system and thus cannot be
+ compiled as a module.
+
+config TWL4030_WATCHDOG
+ tristate "TWL4030 Watchdog"
+ depends on TWL4030_CORE
+ select WATCHDOG_CORE
+ help
+ Support for TI TWL4030 watchdog. Say 'Y' here to enable the
+ watchdog timer support for TWL4030 chips.
+
+config STMP3XXX_RTC_WATCHDOG
+ tristate "Freescale STMP3XXX & i.MX23/28 watchdog"
+ depends on RTC_DRV_STMP || COMPILE_TEST
+ select WATCHDOG_CORE
+ help
+ Say Y here to include support for the watchdog timer inside
+ the RTC for the STMP37XX/378X or i.MX23/28 SoC.
+ To compile this driver as a module, choose M here: the
+ module will be called stmp3xxx_rtc_wdt.
+
+config TS4800_WATCHDOG
+ tristate "TS-4800 Watchdog"
+ depends on HAS_IOMEM && OF
+ depends on SOC_IMX51 || COMPILE_TEST
+ select WATCHDOG_CORE
+ select MFD_SYSCON
+ help
+ Technologic Systems TS-4800 has watchdog timer implemented in
+ an external FPGA. Say Y here if you want to support for the
+ watchdog timer on TS-4800 board.
+
+config TS72XX_WATCHDOG
+ tristate "TS-72XX SBC Watchdog"
+ depends on MACH_TS72XX || COMPILE_TEST
+ select WATCHDOG_CORE
+ help
+ Technologic Systems TS-7200, TS-7250 and TS-7260 boards have
+ watchdog timer implemented in a external CPLD chip. Say Y here
+ if you want to support for the watchdog timer on TS-72XX boards.
+
+ To compile this driver as a module, choose M here: the
+ module will be called ts72xx_wdt.
+
+config MAX63XX_WATCHDOG
+ tristate "Max63xx watchdog"
+ depends on HAS_IOMEM
+ select WATCHDOG_CORE
+ help
+ Support for memory mapped max63{69,70,71,72,73,74} watchdog timer.
+
+config MAX77620_WATCHDOG
+ tristate "Maxim Max77620 Watchdog Timer"
+ depends on MFD_MAX77620 || COMPILE_TEST
+ select WATCHDOG_CORE
+ help
+ This is the driver for the Max77620 watchdog timer.
+ Say 'Y' here to enable the watchdog timer support for
+ MAX77620 chips. To compile this driver as a module,
+ choose M here: the module will be called max77620_wdt.
+
+config IMX2_WDT
+ tristate "IMX2+ Watchdog"
+ depends on ARCH_MXC || ARCH_LAYERSCAPE || COMPILE_TEST
+ select REGMAP_MMIO
+ select WATCHDOG_CORE
+ help
+ This is the driver for the hardware watchdog
+ on the Freescale IMX2 and later processors.
+ If you have one of these processors and wish to have
+ watchdog support enabled, say Y, otherwise say N.
+
+ To compile this driver as a module, choose M here: the
+ module will be called imx2_wdt.
+
+config IMX_SC_WDT
+ tristate "IMX SC Watchdog"
+ depends on HAVE_ARM_SMCCC
+ depends on IMX_SCU
+ select WATCHDOG_CORE
+ help
+ This is the driver for the system controller watchdog
+ on the NXP i.MX SoCs with system controller inside, the
+ watchdog driver will call ARM SMC API and trap into
+ ARM-Trusted-Firmware for operations, ARM-Trusted-Firmware
+ will request system controller to execute the operations.
+ If you have one of these processors and wish to have
+ watchdog support enabled, say Y, otherwise say N.
+
+ To compile this driver as a module, choose M here: the
+ module will be called imx_sc_wdt.
+
+config IMX7ULP_WDT
+ tristate "IMX7ULP Watchdog"
+ depends on ARCH_MXC || COMPILE_TEST
+ select WATCHDOG_CORE
+ help
+ This is the driver for the hardware watchdog on the Freescale
+ IMX7ULP and later processors. If you have one of these
+ processors and wish to have watchdog support enabled,
+ say Y, otherwise say N.
+
+ To compile this driver as a module, choose M here: the
+ module will be called imx7ulp_wdt.
+
+config UX500_WATCHDOG
+ tristate "ST-Ericsson Ux500 watchdog"
+ depends on MFD_DB8500_PRCMU
+ select WATCHDOG_CORE
+ default y
+ help
+ Say Y here to include Watchdog timer support for the watchdog
+ existing in the prcmu of ST-Ericsson Ux500 series platforms.
+
+ To compile this driver as a module, choose M here: the
+ module will be called ux500_wdt.
+
+config RETU_WATCHDOG
+ tristate "Retu watchdog"
+ depends on MFD_RETU
+ select WATCHDOG_CORE
+ help
+ Retu watchdog driver for Nokia Internet Tablets (770, N800,
+ N810). At least on N800 the watchdog cannot be disabled, so
+ this driver is essential and you should enable it.
+
+ To compile this driver as a module, choose M here: the
+ module will be called retu_wdt.
+
+config MOXART_WDT
+ tristate "MOXART watchdog"
+ depends on ARCH_MOXART || COMPILE_TEST
+ help
+ Say Y here to include Watchdog timer support for the watchdog
+ existing on the MOXA ART SoC series platforms.
+
+ To compile this driver as a module, choose M here: the
+ module will be called moxart_wdt.
+
+config SIRFSOC_WATCHDOG
+ tristate "SiRFSOC watchdog"
+ depends on HAS_IOMEM
+ depends on ARCH_SIRF || COMPILE_TEST
+ select WATCHDOG_CORE
+ default y
+ help
+ Support for CSR SiRFprimaII and SiRFatlasVI watchdog. When
+ the watchdog triggers the system will be reset.
+
+config ST_LPC_WATCHDOG
+ tristate "STMicroelectronics LPC Watchdog"
+ depends on ARCH_STI || COMPILE_TEST
+ depends on OF
+ select WATCHDOG_CORE
+ help
+ Say Y here to include STMicroelectronics Low Power Controller
+ (LPC) based Watchdog timer support.
+
+ To compile this driver as a module, choose M here: the
+ module will be called st_lpc_wdt.
+
+config TEGRA_WATCHDOG
+ tristate "Tegra watchdog"
+ depends on (ARCH_TEGRA || COMPILE_TEST) && HAS_IOMEM
+ select WATCHDOG_CORE
+ help
+ Say Y here to include support for the watchdog timer
+ embedded in NVIDIA Tegra SoCs.
+
+ To compile this driver as a module, choose M here: the
+ module will be called tegra_wdt.
+
+config QCOM_WDT
+ tristate "QCOM watchdog"
+ depends on HAS_IOMEM
+ depends on ARCH_QCOM || COMPILE_TEST
+ select WATCHDOG_CORE
+ help
+ Say Y here to include Watchdog timer support for the watchdog found
+ on QCOM chipsets. Currently supported targets are the MSM8960,
+ APQ8064, and IPQ8064.
+
+ To compile this driver as a module, choose M here: the
+ module will be called qcom_wdt.
+
+config MESON_GXBB_WATCHDOG
+ tristate "Amlogic Meson GXBB SoCs watchdog support"
+ depends on ARCH_MESON || COMPILE_TEST
+ select WATCHDOG_CORE
+ help
+ Say Y here to include support for the watchdog timer
+ in Amlogic Meson GXBB SoCs.
+ To compile this driver as a module, choose M here: the
+ module will be called meson_gxbb_wdt.
+
+config MESON_WATCHDOG
+ tristate "Amlogic Meson SoCs watchdog support"
+ depends on ARCH_MESON || COMPILE_TEST
+ select WATCHDOG_CORE
+ help
+ Say Y here to include support for the watchdog timer
+ in Amlogic Meson SoCs.
+ To compile this driver as a module, choose M here: the
+ module will be called meson_wdt.
+
+config MEDIATEK_WATCHDOG
+ tristate "Mediatek SoCs watchdog support"
+ depends on ARCH_MEDIATEK || COMPILE_TEST
+ select WATCHDOG_CORE
+ select RESET_CONTROLLER
+ help
+ Say Y here to include support for the watchdog timer
+ in Mediatek SoCs.
+ To compile this driver as a module, choose M here: the
+ module will be called mtk_wdt.
+
+config DIGICOLOR_WATCHDOG
+ tristate "Conexant Digicolor SoCs watchdog support"
+ depends on ARCH_DIGICOLOR || COMPILE_TEST
+ select WATCHDOG_CORE
+ help
+ Say Y here to include support for the watchdog timer
+ in Conexant Digicolor SoCs.
+ To compile this driver as a module, choose M here: the
+ module will be called digicolor_wdt.
+
+config ARM_SMC_WATCHDOG
+ tristate "ARM Secure Monitor Call based watchdog support"
+ depends on ARM || ARM64
+ depends on OF
+ depends on HAVE_ARM_SMCCC
+ select WATCHDOG_CORE
+ help
+ Say Y here to include support for a watchdog timer
+ implemented by the EL3 Secure Monitor on ARM platforms.
+ Requires firmware support.
+ To compile this driver as a module, choose M here: the
+ module will be called arm_smc_wdt.
+
+config LPC18XX_WATCHDOG
+ tristate "LPC18xx/43xx Watchdog"
+ depends on ARCH_LPC18XX || COMPILE_TEST
+ depends on HAS_IOMEM
+ select WATCHDOG_CORE
+ help
+ Say Y here if to include support for the watchdog timer
+ in NXP LPC SoCs family, which includes LPC18xx/LPC43xx
+ processors.
+ To compile this driver as a module, choose M here: the
+ module will be called lpc18xx_wdt.
+
+config ATLAS7_WATCHDOG
+ tristate "CSRatlas7 watchdog"
+ depends on ARCH_ATLAS7 || COMPILE_TEST
+ help
+ Say Y here to include Watchdog timer support for the watchdog
+ existing on the CSRatlas7 series platforms.
+
+ To compile this driver as a module, choose M here: the
+ module will be called atlas7_wdt.
+
+config RENESAS_WDT
+ tristate "Renesas WDT Watchdog"
+ depends on ARCH_RENESAS || COMPILE_TEST
+ select WATCHDOG_CORE
+ help
+ This driver adds watchdog support for the integrated watchdogs in the
+ Renesas R-Car and other SH-Mobile SoCs (usually named RWDT or SWDT).
+
+config RENESAS_RZAWDT
+ tristate "Renesas RZ/A WDT Watchdog"
+ depends on ARCH_RENESAS || COMPILE_TEST
+ select WATCHDOG_CORE
+ help
+ This driver adds watchdog support for the integrated watchdogs in the
+ Renesas RZ/A SoCs. These watchdogs can be used to reset a system.
+
+config ASPEED_WATCHDOG
+ tristate "Aspeed BMC watchdog support"
+ depends on ARCH_ASPEED || COMPILE_TEST
+ select WATCHDOG_CORE
+ help
+ Say Y here to include support for the watchdog timer
+ in Aspeed BMC SoCs.
+
+ This driver is required to reboot the SoC.
+
+ To compile this driver as a module, choose M here: the
+ module will be called aspeed_wdt.
+
+config ZX2967_WATCHDOG
+ tristate "ZTE zx2967 SoCs watchdog support"
+ depends on ARCH_ZX
+ select WATCHDOG_CORE
+ help
+ Say Y here to include support for the watchdog timer
+ in ZTE zx2967 SoCs.
+ To compile this driver as a module, choose M here: the
+ module will be called zx2967_wdt.
+
+config STM32_WATCHDOG
+ tristate "STM32 Independent WatchDoG (IWDG) support"
+ depends on ARCH_STM32
+ select WATCHDOG_CORE
+ default y
+ help
+ Say Y here to include support for the watchdog timer
+ in stm32 SoCs.
+
+ To compile this driver as a module, choose M here: the
+ module will be called stm32_iwdg.
+
+config STPMIC1_WATCHDOG
+ tristate "STPMIC1 PMIC watchdog support"
+ depends on MFD_STPMIC1
+ select WATCHDOG_CORE
+ help
+ Say Y here to include watchdog support embedded into STPMIC1 PMIC.
+ If the watchdog timer expires, stpmic1 will shut down all its power
+ supplies.
+
+ To compile this driver as a module, choose M here: the
+ module will be called spmic1_wdt.
+
+config UNIPHIER_WATCHDOG
+ tristate "UniPhier watchdog support"
+ depends on ARCH_UNIPHIER || COMPILE_TEST
+ depends on OF && MFD_SYSCON
+ select WATCHDOG_CORE
+ help
+ Say Y here to include support watchdog timer embedded
+ into the UniPhier system.
+
+ To compile this driver as a module, choose M here: the
+ module will be called uniphier_wdt.
+
+config RTD119X_WATCHDOG
+ bool "Realtek RTD119x/RTD129x watchdog support"
+ depends on ARCH_REALTEK || COMPILE_TEST
+ depends on OF
+ select WATCHDOG_CORE
+ default ARCH_REALTEK
+ help
+ Say Y here to include support for the watchdog timer in
+ Realtek RTD1295 SoCs.
+
+config SPRD_WATCHDOG
+ tristate "Spreadtrum watchdog support"
+ depends on ARCH_SPRD || COMPILE_TEST
+ select WATCHDOG_CORE
+ help
+ Say Y here to include watchdog timer supported
+ by Spreadtrum system.
+
+config PM8916_WATCHDOG
+ tristate "QCOM PM8916 pmic watchdog"
+ depends on OF && MFD_SPMI_PMIC
+ select WATCHDOG_CORE
+ help
+ Say Y here to include support watchdog timer embedded into the
+ pm8916 module.
+
+config VISCONTI_WATCHDOG
+ tristate "Toshiba Visconti series watchdog support"
+ depends on ARCH_VISCONTI || COMPILE_TEST
+ select WATCHDOG_CORE
+ help
+ Say Y here to include support for the watchdog timer in Toshiba
+ Visconti SoCs.
+
+# X86 (i386 + ia64 + x86_64) Architecture
+
+config ACQUIRE_WDT
+ tristate "Acquire SBC Watchdog Timer"
+ depends on X86
+ help
+ This is the driver for the hardware watchdog on Single Board
+ Computers produced by Acquire Inc (and others). This watchdog
+ simply watches your kernel to make sure it doesn't freeze, and if
+ it does, it reboots your computer after a certain amount of time.
+
+ To compile this driver as a module, choose M here: the
+ module will be called acquirewdt.
+
+ Most people will say N.
+
+config ADVANTECH_WDT
+ tristate "Advantech SBC Watchdog Timer"
+ depends on X86
+ help
+ If you are configuring a Linux kernel for the Advantech single-board
+ computer, say `Y' here to support its built-in watchdog timer
+ feature. More information can be found at
+ <https://www.advantech.com.tw/products/>
+
+config ALIM1535_WDT
+ tristate "ALi M1535 PMU Watchdog Timer"
+ depends on X86 && PCI
+ help
+ This is the driver for the hardware watchdog on the ALi M1535 PMU.
+
+ To compile this driver as a module, choose M here: the
+ module will be called alim1535_wdt.
+
+ Most people will say N.
+
+config ALIM7101_WDT
+ tristate "ALi M7101 PMU Computer Watchdog"
+ depends on PCI
+ help
+ This is the driver for the hardware watchdog on the ALi M7101 PMU
+ as used in the x86 Cobalt servers and also found in some
+ SPARC Netra servers too.
+
+ To compile this driver as a module, choose M here: the
+ module will be called alim7101_wdt.
+
+ Most people will say N.
+
+config EBC_C384_WDT
+ tristate "WinSystems EBC-C384 Watchdog Timer"
+ depends on X86
+ select ISA_BUS_API
+ select WATCHDOG_CORE
+ help
+ Enables watchdog timer support for the watchdog timer on the
+ WinSystems EBC-C384 motherboard. The timeout may be configured via
+ the timeout module parameter.
+
+config F71808E_WDT
+ tristate "Fintek F718xx, F818xx Super I/O Watchdog"
+ depends on X86
+ help
+ This is the driver for the hardware watchdog on the Fintek F71808E,
+ F71862FG, F71868, F71869, F71882FG, F71889FG, F81803, F81865, and
+ F81866 Super I/O controllers.
+
+ You can compile this driver directly into the kernel, or use
+ it as a module. The module will be called f71808e_wdt.
+
+config SP5100_TCO
+ tristate "AMD/ATI SP5100 TCO Timer/Watchdog"
+ depends on X86 && PCI
+ select WATCHDOG_CORE
+ help
+ Hardware watchdog driver for the AMD/ATI SP5100 chipset. The TCO
+ (Total Cost of Ownership) timer is a watchdog timer that will reboot
+ the machine after its expiration. The expiration time can be
+ configured with the "heartbeat" parameter.
+
+ To compile this driver as a module, choose M here: the
+ module will be called sp5100_tco.
+
+config GEODE_WDT
+ tristate "AMD Geode CS5535/CS5536 Watchdog"
+ depends on CS5535_MFGPT
+ help
+ This driver enables a watchdog capability built into the
+ CS5535/CS5536 companion chips for the AMD Geode GX and LX
+ processors. This watchdog watches your kernel to make sure
+ it doesn't freeze, and if it does, it reboots your computer after
+ a certain amount of time.
+
+ You can compile this driver directly into the kernel, or use
+ it as a module. The module will be called geodewdt.
+
+config SC520_WDT
+ tristate "AMD Elan SC520 processor Watchdog"
+ depends on MELAN || COMPILE_TEST
+ help
+ This is the driver for the hardware watchdog built in to the
+ AMD "Elan" SC520 microcomputer commonly used in embedded systems.
+ This watchdog simply watches your kernel to make sure it doesn't
+ freeze, and if it does, it reboots your computer after a certain
+ amount of time.
+
+ You can compile this driver directly into the kernel, or use
+ it as a module. The module will be called sc520_wdt.
+
+config SBC_FITPC2_WATCHDOG
+ tristate "Compulab SBC-FITPC2 watchdog"
+ depends on X86
+ help
+ This is the driver for the built-in watchdog timer on the fit-PC2,
+ fit-PC2i, CM-iAM single-board computers made by Compulab.
+
+ It`s possible to enable watchdog timer either from BIOS (F2) or from booted Linux.
+ When "Watchdog Timer Value" enabled one can set 31-255 s operational range.
+
+ Entering BIOS setup temporary disables watchdog operation regardless to current state,
+ so system will not be restarted while user in BIOS setup.
+
+ Once watchdog was enabled the system will be restarted every
+ "Watchdog Timer Value" period, so to prevent it user can restart or
+ disable the watchdog.
+
+ To compile this driver as a module, choose M here: the
+ module will be called sbc_fitpc2_wdt.
+
+ Most people will say N.
+
+config EUROTECH_WDT
+ tristate "Eurotech CPU-1220/1410 Watchdog Timer"
+ depends on X86
+ help
+ Enable support for the watchdog timer on the Eurotech CPU-1220 and
+ CPU-1410 cards. These are PC/104 SBCs. Spec sheets and product
+ information are at <http://www.eurotech.it/>.
+
+config IB700_WDT
+ tristate "IB700 SBC Watchdog Timer"
+ depends on X86
+ help
+ This is the driver for the hardware watchdog on the IB700 Single
+ Board Computer produced by TMC Technology (www.tmc-uk.com). This watchdog
+ simply watches your kernel to make sure it doesn't freeze, and if
+ it does, it reboots your computer after a certain amount of time.
+
+ This driver is like the WDT501 driver but for slightly different hardware.
+
+ To compile this driver as a module, choose M here: the
+ module will be called ib700wdt.
+
+ Most people will say N.
+
+config IBMASR
+ tristate "IBM Automatic Server Restart"
+ depends on X86
+ help
+ This is the driver for the IBM Automatic Server Restart watchdog
+ timer built-in into some eServer xSeries machines.
+
+ To compile this driver as a module, choose M here: the
+ module will be called ibmasr.
+
+config WAFER_WDT
+ tristate "ICP Single Board Computer Watchdog Timer"
+ depends on X86
+ help
+ This is a driver for the hardware watchdog on the ICP Single
+ Board Computer. This driver is working on (at least) the following
+ IPC SBC's: Wafer 5823, Rocky 4783, Rocky 3703 and Rocky 3782.
+
+ To compile this driver as a module, choose M here: the
+ module will be called wafer5823wdt.
+
+config I6300ESB_WDT
+ tristate "Intel 6300ESB Timer/Watchdog"
+ depends on PCI
+ select WATCHDOG_CORE
+ help
+ Hardware driver for the watchdog timer built into the Intel
+ 6300ESB controller hub.
+
+ To compile this driver as a module, choose M here: the
+ module will be called i6300esb.
+
+config IE6XX_WDT
+ tristate "Intel Atom E6xx Watchdog"
+ depends on X86 && PCI
+ select WATCHDOG_CORE
+ select MFD_CORE
+ select LPC_SCH
+ help
+ Hardware driver for the watchdog timer built into the Intel
+ Atom E6XX (TunnelCreek) processor.
+
+ To compile this driver as a module, choose M here: the
+ module will be called ie6xx_wdt.
+
+config INTEL_SCU_WATCHDOG
+ bool "Intel SCU Watchdog for Mobile Platforms"
+ depends on X86_INTEL_MID
+ help
+ Hardware driver for the watchdog time built into the Intel SCU
+ for Intel Mobile Platforms.
+
+ To compile this driver as a module, choose M here.
+
+config INTEL_MID_WATCHDOG
+ tristate "Intel MID Watchdog Timer"
+ depends on X86_INTEL_MID
+ select WATCHDOG_CORE
+ help
+ Watchdog timer driver built into the Intel SCU for Intel MID
+ Platforms.
+
+ This driver currently supports only the watchdog evolution
+ implementation in SCU, available for Merrifield generation.
+
+ To compile this driver as a module, choose M here.
+
+config ITCO_WDT
+ tristate "Intel TCO Timer/Watchdog"
+ depends on (X86 || IA64) && PCI
+ select WATCHDOG_CORE
+ depends on I2C || I2C=n
+ depends on MFD_INTEL_PMC_BXT || !MFD_INTEL_PMC_BXT
+ select LPC_ICH if !EXPERT
+ select I2C_I801 if !EXPERT && I2C
+ help
+ Hardware driver for the intel TCO timer based watchdog devices.
+ These drivers are included in the Intel 82801 I/O Controller
+ Hub family (from ICH0 up to ICH10) and in the Intel 63xxESB
+ controller hub.
+
+ The TCO (Total Cost of Ownership) timer is a watchdog timer
+ that will reboot the machine after its second expiration. The
+ expiration time can be configured with the "heartbeat" parameter.
+
+ On some motherboards the driver may fail to reset the chipset's
+ NO_REBOOT flag which prevents the watchdog from rebooting the
+ machine. If this is the case you will get a kernel message like
+ "failed to reset NO_REBOOT flag, reboot disabled by hardware".
+
+ To compile this driver as a module, choose M here: the
+ module will be called iTCO_wdt.
+
+config ITCO_VENDOR_SUPPORT
+ bool "Intel TCO Timer/Watchdog Specific Vendor Support"
+ depends on ITCO_WDT
+ help
+ Add vendor specific support to the intel TCO timer based watchdog
+ devices. At this moment we only have additional support for some
+ SuperMicro Inc. motherboards.
+
+config IT8712F_WDT
+ tristate "IT8712F (Smart Guardian) Watchdog Timer"
+ depends on X86
+ help
+ This is the driver for the built-in watchdog timer on the IT8712F
+ Super I/0 chipset used on many motherboards.
+
+ If the driver does not work, then make sure that the game port in
+ the BIOS is enabled.
+
+ To compile this driver as a module, choose M here: the
+ module will be called it8712f_wdt.
+
+config IT87_WDT
+ tristate "IT87 Watchdog Timer"
+ depends on X86
+ select WATCHDOG_CORE
+ help
+ This is the driver for the hardware watchdog on the ITE IT8607,
+ IT8620, IT8622, IT8625, IT8628, IT8655, IT8665, IT8686, IT8702,
+ IT8712, IT8716, IT8718, IT8720, IT8721, IT8726, IT8728, and
+ IT8783 Super I/O chips.
+
+ This watchdog simply watches your kernel to make sure it doesn't
+ freeze, and if it does, it reboots your computer after a certain
+ amount of time.
+
+ To compile this driver as a module, choose M here: the module will
+ be called it87_wdt.
+
+config HP_WATCHDOG
+ tristate "HP ProLiant iLO2+ Hardware Watchdog Timer"
+ select WATCHDOG_CORE
+ depends on X86 && PCI
+ help
+ A software monitoring watchdog and NMI handling driver. This driver
+ will detect lockups and provide a stack trace. This is a driver that
+ will only load on an HP ProLiant system with a minimum of iLO2 support.
+ To compile this driver as a module, choose M here: the module will be
+ called hpwdt.
+
+config HPWDT_NMI_DECODING
+ bool "NMI support for the HP ProLiant iLO2+ Hardware Watchdog Timer"
+ depends on HP_WATCHDOG
+ default y
+ help
+ Enables the NMI handler for the watchdog pretimeout NMI and the iLO
+ "Generate NMI to System" virtual button. When an NMI is claimed
+ by the driver, panic is called.
+
+config KEMPLD_WDT
+ tristate "Kontron COM Watchdog Timer"
+ depends on MFD_KEMPLD
+ select WATCHDOG_CORE
+ help
+ Support for the PLD watchdog on some Kontron ETX and COMexpress
+ (ETXexpress) modules
+
+ This driver can also be built as a module. If so, the module will be
+ called kempld_wdt.
+
+config SC1200_WDT
+ tristate "National Semiconductor PC87307/PC97307 (ala SC1200) Watchdog"
+ depends on X86
+ help
+ This is a driver for National Semiconductor PC87307/PC97307 hardware
+ watchdog cards as found on the SC1200. This watchdog is mainly used
+ for power management purposes and can be used to power down the device
+ during inactivity periods (includes interrupt activity monitoring).
+
+ To compile this driver as a module, choose M here: the
+ module will be called sc1200wdt.
+
+ Most people will say N.
+
+config SCx200_WDT
+ tristate "National Semiconductor SCx200 Watchdog"
+ depends on SCx200 && PCI
+ help
+ Enable the built-in watchdog timer support on the National
+ Semiconductor SCx200 processors.
+
+ If compiled as a module, it will be called scx200_wdt.
+
+config PC87413_WDT
+ tristate "NS PC87413 watchdog"
+ depends on X86
+ help
+ This is the driver for the hardware watchdog on the PC87413 chipset
+ This watchdog simply watches your kernel to make sure it doesn't
+ freeze, and if it does, it reboots your computer after a certain
+ amount of time.
+
+ To compile this driver as a module, choose M here: the
+ module will be called pc87413_wdt.
+
+ Most people will say N.
+
+config NV_TCO
+ tristate "nVidia TCO Timer/Watchdog"
+ depends on X86 && PCI
+ help
+ Hardware driver for the TCO timer built into the nVidia Hub family
+ (such as the MCP51). The TCO (Total Cost of Ownership) timer is a
+ watchdog timer that will reboot the machine after its second
+ expiration. The expiration time can be configured with the
+ "heartbeat" parameter.
+
+ On some motherboards the driver may fail to reset the chipset's
+ NO_REBOOT flag which prevents the watchdog from rebooting the
+ machine. If this is the case you will get a kernel message like
+ "failed to reset NO_REBOOT flag, reboot disabled by hardware".
+
+ To compile this driver as a module, choose M here: the
+ module will be called nv_tco.
+
+config RDC321X_WDT
+ tristate "RDC R-321x SoC watchdog"
+ depends on X86_RDC321X || COMPILE_TEST
+ depends on PCI
+ help
+ This is the driver for the built in hardware watchdog
+ in the RDC R-321x SoC.
+
+ To compile this driver as a module, choose M here: the
+ module will be called rdc321x_wdt.
+
+config 60XX_WDT
+ tristate "SBC-60XX Watchdog Timer"
+ depends on X86
+ help
+ This driver can be used with the watchdog timer found on some
+ single board computers, namely the 6010 PII based computer.
+ It may well work with other cards. It reads port 0x443 to enable
+ and re-set the watchdog timer, and reads port 0x45 to disable
+ the watchdog. If you have a card that behave in similar ways,
+ you can probably make this driver work with your card as well.
+
+ You can compile this driver directly into the kernel, or use
+ it as a module. The module will be called sbc60xxwdt.
+
+config SBC8360_WDT
+ tristate "SBC8360 Watchdog Timer"
+ depends on X86_32
+ help
+
+ This is the driver for the hardware watchdog on the SBC8360 Single
+ Board Computer produced by Axiomtek Co., Ltd. (www.axiomtek.com).
+
+ To compile this driver as a module, choose M here: the
+ module will be called sbc8360.
+
+ Most people will say N.
+
+config SBC7240_WDT
+ tristate "SBC Nano 7240 Watchdog Timer"
+ depends on X86_32 && !UML
+ help
+ This is the driver for the hardware watchdog found on the IEI
+ single board computers EPIC Nano 7240 (and likely others). This
+ watchdog simply watches your kernel to make sure it doesn't freeze,
+ and if it does, it reboots your computer after a certain amount of
+ time.
+
+ To compile this driver as a module, choose M here: the
+ module will be called sbc7240_wdt.
+
+config CPU5_WDT
+ tristate "SMA CPU5 Watchdog"
+ depends on X86
+ help
+ TBD.
+ To compile this driver as a module, choose M here: the
+ module will be called cpu5wdt.
+
+config SMSC_SCH311X_WDT
+ tristate "SMSC SCH311X Watchdog Timer"
+ depends on X86
+ help
+ This is the driver for the hardware watchdog timer on the
+ SMSC SCH3112, SCH3114 and SCH3116 Super IO chipset
+ (LPC IO with 8042 KBC, Reset Generation, HWM and multiple
+ serial ports).
+
+ To compile this driver as a module, choose M here: the
+ module will be called sch311x_wdt.
+
+config SMSC37B787_WDT
+ tristate "Winbond SMsC37B787 Watchdog Timer"
+ depends on X86
+ help
+ This is the driver for the hardware watchdog component on the
+ Winbond SMsC37B787 chipset as used on the NetRunner Mainboard
+ from Vision Systems and maybe others.
+
+ This watchdog simply watches your kernel to make sure it doesn't
+ freeze, and if it does, it reboots your computer after a certain
+ amount of time.
+
+ Usually a userspace daemon will notify the kernel WDT driver that
+ userspace is still alive, at regular intervals.
+
+ To compile this driver as a module, choose M here: the
+ module will be called smsc37b787_wdt.
+
+ Most people will say N.
+
+config TQMX86_WDT
+ tristate "TQ-Systems TQMX86 Watchdog Timer"
+ depends on X86
+ select WATCHDOG_CORE
+ help
+ This is the driver for the hardware watchdog timer in the TQMX86 IO
+ controller found on some of their ComExpress Modules.
+
+ To compile this driver as a module, choose M here; the module
+ will be called tqmx86_wdt.
+
+ Most people will say N.
+
+config VIA_WDT
+ tristate "VIA Watchdog Timer"
+ depends on X86 && PCI
+ select WATCHDOG_CORE
+ help
+ This is the driver for the hardware watchdog timer on VIA
+ southbridge chipset CX700, VX800/VX820 or VX855/VX875.
+
+ To compile this driver as a module, choose M here; the module
+ will be called via_wdt.
+
+ Most people will say N.
+
+config W83627HF_WDT
+ tristate "Watchdog timer for W83627HF/W83627DHG and compatibles"
+ depends on X86
+ select WATCHDOG_CORE
+ help
+ This is the driver for the hardware watchdog on the following
+ Super I/O chips.
+ W83627DHG/DHG-P/EHF/EHG/F/G/HF/S/SF/THF/UHG/UG
+ W83637HF
+ W83667HG/HG-B
+ W83687THF
+ W83697HF
+ W83697UG
+ NCT6775
+ NCT6776
+ NCT6779
+ NCT6791
+ NCT6792
+ NCT6102D/04D/06D
+ NCT6116D
+
+ This watchdog simply watches your kernel to make sure it doesn't
+ freeze, and if it does, it reboots your computer after a certain
+ amount of time.
+
+ To compile this driver as a module, choose M here: the
+ module will be called w83627hf_wdt.
+
+ Most people will say N.
+
+config W83877F_WDT
+ tristate "W83877F (EMACS) Watchdog Timer"
+ depends on X86
+ help
+ This is the driver for the hardware watchdog on the W83877F chipset
+ as used in EMACS PC-104 motherboards (and likely others). This
+ watchdog simply watches your kernel to make sure it doesn't freeze,
+ and if it does, it reboots your computer after a certain amount of
+ time.
+
+ To compile this driver as a module, choose M here: the
+ module will be called w83877f_wdt.
+
+ Most people will say N.
+
+config W83977F_WDT
+ tristate "W83977F (PCM-5335) Watchdog Timer"
+ depends on X86
+ help
+ This is the driver for the hardware watchdog on the W83977F I/O chip
+ as used in AAEON's PCM-5335 SBC (and likely others). This
+ watchdog simply watches your kernel to make sure it doesn't freeze,
+ and if it does, it reboots your computer after a certain amount of
+ time.
+
+ To compile this driver as a module, choose M here: the
+ module will be called w83977f_wdt.
+
+config MACHZ_WDT
+ tristate "ZF MachZ Watchdog"
+ depends on X86
+ help
+ If you are using a ZF Micro MachZ processor, say Y here, otherwise
+ N. This is the driver for the watchdog timer built-in on that
+ processor using ZF-Logic interface. This watchdog simply watches
+ your kernel to make sure it doesn't freeze, and if it does, it
+ reboots your computer after a certain amount of time.
+
+ To compile this driver as a module, choose M here: the
+ module will be called machzwd.
+
+config SBC_EPX_C3_WATCHDOG
+ tristate "Winsystems SBC EPX-C3 watchdog"
+ depends on X86
+ help
+ This is the driver for the built-in watchdog timer on the EPX-C3
+ Single-board computer made by Winsystems, Inc.
+
+ *Note*: This hardware watchdog is not probeable and thus there
+ is no way to know if writing to its IO address will corrupt
+ your system or have any real effect. The only way to be sure
+ that this driver does what you want is to make sure you
+ are running it on an EPX-C3 from Winsystems with the watchdog
+ timer at IO address 0x1ee and 0x1ef. It will write to both those
+ IO ports. Basically, the assumption is made that if you compile
+ this driver into your kernel and/or load it as a module, that you
+ know what you are doing and that you are in fact running on an
+ EPX-C3 board!
+
+ To compile this driver as a module, choose M here: the
+ module will be called sbc_epx_c3.
+
+config INTEL_MEI_WDT
+ tristate "Intel MEI iAMT Watchdog"
+ depends on INTEL_MEI && X86
+ select WATCHDOG_CORE
+ help
+ A device driver for the Intel MEI iAMT watchdog.
+
+ The Intel AMT Watchdog is an OS Health (Hang/Crash) watchdog.
+ Whenever the OS hangs or crashes, iAMT will send an event
+ to any subscriber to this event. The watchdog doesn't reset the
+ the platform.
+
+ To compile this driver as a module, choose M here:
+ the module will be called mei_wdt.
+
+config NI903X_WDT
+ tristate "NI 903x/913x Watchdog"
+ depends on X86 && ACPI
+ select WATCHDOG_CORE
+ help
+ This is the driver for the watchdog timer on the National Instruments
+ 903x/913x real-time controllers.
+
+ To compile this driver as a module, choose M here: the module will be
+ called ni903x_wdt.
+
+config NIC7018_WDT
+ tristate "NIC7018 Watchdog"
+ depends on X86 && ACPI
+ select WATCHDOG_CORE
+ help
+ Support for National Instruments NIC7018 Watchdog.
+
+ To compile this driver as a module, choose M here: the module will be
+ called nic7018_wdt.
+
+# M68K Architecture
+
+config M54xx_WATCHDOG
+ tristate "MCF54xx watchdog support"
+ depends on M548x
+ help
+ To compile this driver as a module, choose M here: the
+ module will be called m54xx_wdt.
+
+# MicroBlaze Architecture
+
+# MIPS Architecture
+
+config ATH79_WDT
+ tristate "Atheros AR71XX/AR724X/AR913X hardware watchdog"
+ depends on ATH79 || (ARM && COMPILE_TEST)
+ help
+ Hardware driver for the built-in watchdog timer on the Atheros
+ AR71XX/AR724X/AR913X SoCs.
+
+config BCM47XX_WDT
+ tristate "Broadcom BCM47xx Watchdog Timer"
+ depends on BCM47XX || ARCH_BCM_5301X || COMPILE_TEST
+ select WATCHDOG_CORE
+ help
+ Hardware driver for the Broadcom BCM47xx Watchdog Timer.
+
+config RC32434_WDT
+ tristate "IDT RC32434 SoC Watchdog Timer"
+ depends on MIKROTIK_RB532
+ help
+ Hardware driver for the IDT RC32434 SoC built-in
+ watchdog timer.
+
+ To compile this driver as a module, choose M here: the
+ module will be called rc32434_wdt.
+
+config INDYDOG
+ tristate "Indy/I2 Hardware Watchdog"
+ depends on SGI_HAS_INDYDOG
+ help
+ Hardware driver for the Indy's/I2's watchdog. This is a
+ watchdog timer that will reboot the machine after a 60 second
+ timer expired and no process has written to /dev/watchdog during
+ that time.
+
+config JZ4740_WDT
+ tristate "Ingenic jz4740 SoC hardware watchdog"
+ depends on MIPS
+ depends on COMMON_CLK
+ select WATCHDOG_CORE
+ select MFD_SYSCON
+ help
+ Hardware driver for the built-in watchdog timer on Ingenic jz4740 SoCs.
+
+config WDT_MTX1
+ tristate "MTX-1 Hardware Watchdog"
+ depends on MIPS_MTX1 || (MIPS && COMPILE_TEST)
+ help
+ Hardware driver for the MTX-1 boards. This is a watchdog timer that
+ will reboot the machine after a 100 seconds timer expired.
+
+config PNX833X_WDT
+ tristate "PNX833x Hardware Watchdog"
+ depends on SOC_PNX8335
+ depends on BROKEN
+ help
+ Hardware driver for the PNX833x's watchdog. This is a
+ watchdog timer that will reboot the machine after a programmable
+ timer has expired and no process has written to /dev/watchdog during
+ that time.
+
+config SIBYTE_WDOG
+ tristate "Sibyte SoC hardware watchdog"
+ depends on CPU_SB1 || (MIPS && COMPILE_TEST)
+ help
+ Watchdog driver for the built in watchdog hardware in Sibyte
+ SoC processors. There are apparently two watchdog timers
+ on such processors; this driver supports only the first one,
+ because currently Linux only supports exporting one watchdog
+ to userspace.
+
+ To compile this driver as a loadable module, choose M here.
+ The module will be called sb_wdog.
+
+config AR7_WDT
+ tristate "TI AR7 Watchdog Timer"
+ depends on AR7 || (MIPS && 32BIT && COMPILE_TEST)
+ help
+ Hardware driver for the TI AR7 Watchdog Timer.
+
+config TXX9_WDT
+ tristate "Toshiba TXx9 Watchdog Timer"
+ depends on CPU_TX39XX || CPU_TX49XX || (MIPS && COMPILE_TEST)
+ select WATCHDOG_CORE
+ help
+ Hardware driver for the built-in watchdog timer on TXx9 MIPS SoCs.
+
+config OCTEON_WDT
+ tristate "Cavium OCTEON SOC family Watchdog Timer"
+ depends on CAVIUM_OCTEON_SOC
+ default y
+ select WATCHDOG_CORE
+ select EXPORT_UASM if OCTEON_WDT = m
+ help
+ Hardware driver for OCTEON's on chip watchdog timer.
+ Enables the watchdog for all cores running Linux. It
+ installs a NMI handler and pokes the watchdog based on an
+ interrupt. On first expiration of the watchdog, the
+ interrupt handler pokes it. The second expiration causes an
+ NMI that prints a message. The third expiration causes a
+ global soft reset.
+
+ When userspace has /dev/watchdog open, no poking is done
+ from the first interrupt, it is then only poked when the
+ device is written.
+
+config BCM63XX_WDT
+ tristate "Broadcom BCM63xx hardware watchdog"
+ depends on BCM63XX
+ help
+ Watchdog driver for the built in watchdog hardware in Broadcom
+ BCM63xx SoC.
+
+ To compile this driver as a loadable module, choose M here.
+ The module will be called bcm63xx_wdt.
+
+config BCM2835_WDT
+ tristate "Broadcom BCM2835 hardware watchdog"
+ depends on ARCH_BCM2835 || (OF && COMPILE_TEST)
+ select WATCHDOG_CORE
+ help
+ Watchdog driver for the built in watchdog hardware in Broadcom
+ BCM2835 SoC.
+
+ To compile this driver as a loadable module, choose M here.
+ The module will be called bcm2835_wdt.
+
+config BCM_KONA_WDT
+ tristate "BCM Kona Watchdog"
+ depends on ARCH_BCM_MOBILE || COMPILE_TEST
+ select WATCHDOG_CORE
+ help
+ Support for the watchdog timer on the following Broadcom BCM281xx
+ family, which includes BCM11130, BCM11140, BCM11351, BCM28145 and
+ BCM28155 variants.
+
+ Say 'Y' or 'M' here to enable the driver. The module will be called
+ bcm_kona_wdt.
+
+config BCM_KONA_WDT_DEBUG
+ bool "DEBUGFS support for BCM Kona Watchdog"
+ depends on BCM_KONA_WDT
+ help
+ If enabled, adds /sys/kernel/debug/bcm_kona_wdt/info which provides
+ access to the driver's internal data structures as well as watchdog
+ timer hardware registres.
+
+ If in doubt, say 'N'.
+
+config BCM7038_WDT
+ tristate "BCM7038 Watchdog"
+ select WATCHDOG_CORE
+ depends on HAS_IOMEM
+ depends on ARCH_BRCMSTB || BMIPS_GENERIC || COMPILE_TEST
+ help
+ Watchdog driver for the built-in hardware in Broadcom 7038 and
+ later SoCs used in set-top boxes. BCM7038 was made public
+ during the 2004 CES, and since then, many Broadcom chips use this
+ watchdog block, including some cable modem chips.
+
+config IMGPDC_WDT
+ tristate "Imagination Technologies PDC Watchdog Timer"
+ depends on HAS_IOMEM
+ depends on MIPS || COMPILE_TEST
+ select WATCHDOG_CORE
+ help
+ Driver for Imagination Technologies PowerDown Controller
+ Watchdog Timer.
+
+ To compile this driver as a loadable module, choose M here.
+ The module will be called imgpdc_wdt.
+
+config LANTIQ_WDT
+ tristate "Lantiq SoC watchdog"
+ depends on LANTIQ
+ select WATCHDOG_CORE
+ help
+ Hardware driver for the Lantiq SoC Watchdog Timer.
+
+config LOONGSON1_WDT
+ tristate "Loongson1 SoC hardware watchdog"
+ depends on MACH_LOONGSON32
+ select WATCHDOG_CORE
+ help
+ Hardware driver for the Loongson1 SoC Watchdog Timer.
+
+config RALINK_WDT
+ tristate "Ralink SoC watchdog"
+ select WATCHDOG_CORE
+ depends on RALINK
+ help
+ Hardware driver for the Ralink SoC Watchdog Timer.
+
+config MT7621_WDT
+ tristate "Mediatek SoC watchdog"
+ select WATCHDOG_CORE
+ depends on SOC_MT7620 || SOC_MT7621
+ help
+ Hardware driver for the Mediatek/Ralink MT7621/8 SoC Watchdog Timer.
+
+config PIC32_WDT
+ tristate "Microchip PIC32 hardware watchdog"
+ select WATCHDOG_CORE
+ depends on MACH_PIC32 || (MIPS && COMPILE_TEST)
+ help
+ Watchdog driver for the built in watchdog hardware in a PIC32.
+
+ Configuration bits must be set appropriately for the watchdog to be
+ controlled by this driver.
+
+ To compile this driver as a loadable module, choose M here.
+ The module will be called pic32-wdt.
+
+config PIC32_DMT
+ tristate "Microchip PIC32 Deadman Timer"
+ select WATCHDOG_CORE
+ depends on MACH_PIC32 || (MIPS && COMPILE_TEST)
+ help
+ Watchdog driver for PIC32 instruction fetch counting timer. This specific
+ timer is typically be used in misson critical and safety critical
+ applications, where any single failure of the software functionality
+ and sequencing must be detected.
+
+ To compile this driver as a loadable module, choose M here.
+ The module will be called pic32-dmt.
+
+# PARISC Architecture
+
+# POWERPC Architecture
+
+config GEF_WDT
+ tristate "GE Watchdog Timer"
+ depends on GE_FPGA
+ help
+ Watchdog timer found in a number of GE single board computers.
+
+config MPC5200_WDT
+ bool "MPC52xx Watchdog Timer"
+ depends on PPC_MPC52xx || COMPILE_TEST
+ help
+ Use General Purpose Timer (GPT) 0 on the MPC5200 as Watchdog.
+
+config 8xxx_WDT
+ tristate "MPC8xxx Platform Watchdog Timer"
+ depends on PPC_8xx || PPC_83xx || PPC_86xx || PPC_MPC512x
+ select WATCHDOG_CORE
+ help
+ This driver is for a SoC level watchdog that exists on some
+ Freescale PowerPC processors. So far this driver supports:
+ - MPC8xx watchdogs
+ - MPC83xx watchdogs
+ - MPC86xx watchdogs
+
+ For BookE processors (MPC85xx) use the BOOKE_WDT driver instead.
+
+config MV64X60_WDT
+ tristate "MV64X60 (Marvell Discovery) Watchdog Timer"
+ depends on MV64X60 || COMPILE_TEST
+
+config PIKA_WDT
+ tristate "PIKA FPGA Watchdog"
+ depends on WARP || (PPC64 && COMPILE_TEST)
+ default y
+ help
+ This enables the watchdog in the PIKA FPGA. Currently used on
+ the Warp platform.
+
+config BOOKE_WDT
+ tristate "PowerPC Book-E Watchdog Timer"
+ depends on BOOKE || 4xx
+ select WATCHDOG_CORE
+ help
+ Watchdog driver for PowerPC Book-E chips, such as the Freescale
+ MPC85xx SOCs and the IBM PowerPC 440.
+
+ Please see Documentation/watchdog/watchdog-api.rst for
+ more information.
+
+config BOOKE_WDT_DEFAULT_TIMEOUT
+ int "PowerPC Book-E Watchdog Timer Default Timeout"
+ depends on BOOKE_WDT
+ default 38 if PPC_FSL_BOOK3E
+ range 0 63 if PPC_FSL_BOOK3E
+ default 3 if !PPC_FSL_BOOK3E
+ range 0 3 if !PPC_FSL_BOOK3E
+ help
+ Select the default watchdog timer period to be used by the PowerPC
+ Book-E watchdog driver. A watchdog "event" occurs when the bit
+ position represented by this number transitions from zero to one.
+
+ For Freescale Book-E processors, this is a number between 0 and 63.
+ For other Book-E processors, this is a number between 0 and 3.
+
+ The value can be overridden by the wdt_period command-line parameter.
+
+config MEN_A21_WDT
+ tristate "MEN A21 VME CPU Carrier Board Watchdog Timer"
+ select WATCHDOG_CORE
+ depends on GPIOLIB || COMPILE_TEST
+ help
+ Watchdog driver for MEN A21 VMEbus CPU Carrier Boards.
+
+ The driver can also be built as a module. If so, the module will be
+ called mena21_wdt.
+
+ If unsure select N here.
+
+# PPC64 Architecture
+
+config WATCHDOG_RTAS
+ tristate "RTAS watchdog"
+ depends on PPC_RTAS
+ help
+ This driver adds watchdog support for the RTAS watchdog.
+
+ To compile this driver as a module, choose M here. The module
+ will be called wdrtas.
+
+# S390 Architecture
+
+config DIAG288_WATCHDOG
+ tristate "System z diag288 Watchdog"
+ depends on S390
+ select WATCHDOG_CORE
+ help
+ IBM s/390 and zSeries machines running under z/VM 5.1 or later
+ provide a virtual watchdog timer to their guest that cause a
+ user define Control Program command to be executed after a
+ timeout.
+ LPAR provides a very similar interface. This driver handles
+ both.
+
+ To compile this driver as a module, choose M here. The module
+ will be called diag288_wdt.
+
+# SUPERH (sh + sh64) Architecture
+
+config SH_WDT
+ tristate "SuperH Watchdog"
+ depends on SUPERH && (CPU_SH3 || CPU_SH4 || COMPILE_TEST)
+ select WATCHDOG_CORE
+ help
+ This driver adds watchdog support for the integrated watchdog in the
+ SuperH processors. If you have one of these processors and wish
+ to have watchdog support enabled, say Y, otherwise say N.
+
+ As a side note, saying Y here will automatically boost HZ to 1000
+ so that the timer has a chance to clear the overflow counter. On
+ slower systems (such as the SH-2 and SH-3) this will likely yield
+ some performance issues. As such, the WDT should be avoided here
+ unless it is absolutely necessary.
+
+ To compile this driver as a module, choose M here: the
+ module will be called shwdt.
+
+# SPARC Architecture
+
+# SPARC64 Architecture
+
+config WATCHDOG_CP1XXX
+ tristate "CP1XXX Hardware Watchdog support"
+ depends on SPARC64 && PCI
+ help
+ This is the driver for the hardware watchdog timers present on
+ Sun Microsystems CompactPCI models CP1400 and CP1500.
+
+ To compile this driver as a module, choose M here: the
+ module will be called cpwatchdog.
+
+ If you do not have a CompactPCI model CP1400 or CP1500, or
+ another UltraSPARC-IIi-cEngine boardset with hardware watchdog,
+ you should say N to this option.
+
+config WATCHDOG_RIO
+ tristate "RIO Hardware Watchdog support"
+ depends on SPARC64 && PCI
+ help
+ Say Y here to support the hardware watchdog capability on Sun RIO
+ machines. The watchdog timeout period is normally one minute but
+ can be changed with a boot-time parameter.
+
+config WATCHDOG_SUN4V
+ tristate "Sun4v Watchdog support"
+ select WATCHDOG_CORE
+ depends on SPARC64
+ help
+ Say Y here to support the hypervisor watchdog capability embedded
+ in the SPARC sun4v architecture.
+
+ To compile this driver as a module, choose M here. The module will
+ be called sun4v_wdt.
+
+# XTENSA Architecture
+
+# Xen Architecture
+
+config XEN_WDT
+ tristate "Xen Watchdog support"
+ depends on XEN
+ select WATCHDOG_CORE
+ help
+ Say Y here to support the hypervisor watchdog capability provided
+ by Xen 4.0 and newer. The watchdog timeout period is normally one
+ minute but can be changed with a boot-time parameter.
+
+config UML_WATCHDOG
+ tristate "UML watchdog"
+ depends on UML || COMPILE_TEST
+
+#
+# ISA-based Watchdog Cards
+#
+
+comment "ISA-based Watchdog Cards"
+ depends on ISA
+
+config PCWATCHDOG
+ tristate "Berkshire Products ISA-PC Watchdog"
+ depends on ISA
+ help
+ This is the driver for the Berkshire Products ISA-PC Watchdog card.
+ This card simply watches your kernel to make sure it doesn't freeze,
+ and if it does, it reboots your computer after a certain amount of
+ time. This driver is like the WDT501 driver but for different
+ hardware. Please read <file:Documentation/watchdog/pcwd-watchdog.rst>. The PC
+ watchdog cards can be ordered from <http://www.berkprod.com/>.
+
+ To compile this driver as a module, choose M here: the
+ module will be called pcwd.
+
+ Most people will say N.
+
+config MIXCOMWD
+ tristate "Mixcom Watchdog"
+ depends on ISA
+ help
+ This is a driver for the Mixcom hardware watchdog cards. This
+ watchdog simply watches your kernel to make sure it doesn't freeze,
+ and if it does, it reboots your computer after a certain amount of
+ time.
+
+ To compile this driver as a module, choose M here: the
+ module will be called mixcomwd.
+
+ Most people will say N.
+
+config WDT
+ tristate "WDT Watchdog timer"
+ depends on ISA
+ help
+ If you have a WDT500P or WDT501P watchdog board, say Y here,
+ otherwise N. It is not possible to probe for this board, which means
+ that you have to inform the kernel about the IO port and IRQ that
+ is needed (you can do this via the io and irq parameters)
+
+ To compile this driver as a module, choose M here: the
+ module will be called wdt.
+
+#
+# PCI-based Watchdog Cards
+#
+
+comment "PCI-based Watchdog Cards"
+ depends on PCI
+
+config PCIPCWATCHDOG
+ tristate "Berkshire Products PCI-PC Watchdog"
+ depends on PCI
+ help
+ This is the driver for the Berkshire Products PCI-PC Watchdog card.
+ This card simply watches your kernel to make sure it doesn't freeze,
+ and if it does, it reboots your computer after a certain amount of
+ time. The card can also monitor the internal temperature of the PC.
+ More info is available at <http://www.berkprod.com/pci_pc_watchdog.htm>.
+
+ To compile this driver as a module, choose M here: the
+ module will be called pcwd_pci.
+
+ Most people will say N.
+
+config WDTPCI
+ tristate "PCI-WDT500/501 Watchdog timer"
+ depends on PCI
+ help
+ If you have a PCI-WDT500/501 watchdog board, say Y here, otherwise N.
+
+ If you have a PCI-WDT501 watchdog board then you can enable the
+ temperature sensor by setting the type parameter to 501.
+
+ If you want to enable the Fan Tachometer on the PCI-WDT501, then you
+ can do this via the tachometer parameter. Only do this if you have a
+ fan tachometer actually set up.
+
+ To compile this driver as a module, choose M here: the
+ module will be called wdt_pci.
+
+#
+# USB-based Watchdog Cards
+#
+
+comment "USB-based Watchdog Cards"
+ depends on USB
+
+config USBPCWATCHDOG
+ tristate "Berkshire Products USB-PC Watchdog"
+ depends on USB
+ help
+ This is the driver for the Berkshire Products USB-PC Watchdog card.
+ This card simply watches your kernel to make sure it doesn't freeze,
+ and if it does, it reboots your computer after a certain amount of
+ time. The card can also monitor the internal temperature of the PC.
+ More info is available at <http://www.berkprod.com/usb_pc_watchdog.htm>.
+
+ To compile this driver as a module, choose M here: the
+ module will be called pcwd_usb.
+
+ Most people will say N.
+
+endif # WATCHDOG