diff options
Diffstat (limited to 'include/drm/drm_framebuffer.h')
| -rw-r--r-- | include/drm/drm_framebuffer.h | 338 |
1 files changed, 338 insertions, 0 deletions
diff --git a/include/drm/drm_framebuffer.h b/include/drm/drm_framebuffer.h new file mode 100644 index 000000000..be658ebbe --- /dev/null +++ b/include/drm/drm_framebuffer.h @@ -0,0 +1,338 @@ +/* + * Copyright (c) 2016 Intel Corporation + * + * Permission to use, copy, modify, distribute, and sell this software and its + * documentation for any purpose is hereby granted without fee, provided that + * the above copyright notice appear in all copies and that both that copyright + * notice and this permission notice appear in supporting documentation, and + * that the name of the copyright holders not be used in advertising or + * publicity pertaining to distribution of the software without specific, + * written prior permission. The copyright holders make no representations + * about the suitability of this software for any purpose. It is provided "as + * is" without express or implied warranty. + * + * THE COPYRIGHT HOLDERS DISCLAIM ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, + * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO + * EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY SPECIAL, INDIRECT OR + * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, + * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER + * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE + * OF THIS SOFTWARE. + */ + +#ifndef __DRM_FRAMEBUFFER_H__ +#define __DRM_FRAMEBUFFER_H__ + +#include <linux/ctype.h> +#include <linux/list.h> +#include <linux/sched.h> + +#include <drm/drm_mode_object.h> + +struct drm_clip_rect; +struct drm_device; +struct drm_file; +struct drm_format_info; +struct drm_framebuffer; +struct drm_gem_object; + +/** + * struct drm_framebuffer_funcs - framebuffer hooks + */ +struct drm_framebuffer_funcs { + /** + * @destroy: + * + * Clean up framebuffer resources, specifically also unreference the + * backing storage. The core guarantees to call this function for every + * framebuffer successfully created by calling + * &drm_mode_config_funcs.fb_create. Drivers must also call + * drm_framebuffer_cleanup() to release DRM core resources for this + * framebuffer. + */ + void (*destroy)(struct drm_framebuffer *framebuffer); + + /** + * @create_handle: + * + * Create a buffer handle in the driver-specific buffer manager (either + * GEM or TTM) valid for the passed-in &struct drm_file. This is used by + * the core to implement the GETFB IOCTL, which returns (for + * sufficiently priviledged user) also a native buffer handle. This can + * be used for seamless transitions between modesetting clients by + * copying the current screen contents to a private buffer and blending + * between that and the new contents. + * + * GEM based drivers should call drm_gem_handle_create() to create the + * handle. + * + * RETURNS: + * + * 0 on success or a negative error code on failure. + */ + int (*create_handle)(struct drm_framebuffer *fb, + struct drm_file *file_priv, + unsigned int *handle); + /** + * @dirty: + * + * Optional callback for the dirty fb IOCTL. + * + * Userspace can notify the driver via this callback that an area of the + * framebuffer has changed and should be flushed to the display + * hardware. This can also be used internally, e.g. by the fbdev + * emulation, though that's not the case currently. + * + * See documentation in drm_mode.h for the struct drm_mode_fb_dirty_cmd + * for more information as all the semantics and arguments have a one to + * one mapping on this function. + * + * Atomic drivers should use drm_atomic_helper_dirtyfb() to implement + * this hook. + * + * RETURNS: + * + * 0 on success or a negative error code on failure. + */ + int (*dirty)(struct drm_framebuffer *framebuffer, + struct drm_file *file_priv, unsigned flags, + unsigned color, struct drm_clip_rect *clips, + unsigned num_clips); +}; + +/** + * struct drm_framebuffer - frame buffer object + * + * Note that the fb is refcounted for the benefit of driver internals, + * for example some hw, disabling a CRTC/plane is asynchronous, and + * scanout does not actually complete until the next vblank. So some + * cleanup (like releasing the reference(s) on the backing GEM bo(s)) + * should be deferred. In cases like this, the driver would like to + * hold a ref to the fb even though it has already been removed from + * userspace perspective. See drm_framebuffer_get() and + * drm_framebuffer_put(). + * + * The refcount is stored inside the mode object @base. + */ +struct drm_framebuffer { + /** + * @dev: DRM device this framebuffer belongs to + */ + struct drm_device *dev; + /** + * @head: Place on the &drm_mode_config.fb_list, access protected by + * &drm_mode_config.fb_lock. + */ + struct list_head head; + + /** + * @base: base modeset object structure, contains the reference count. + */ + struct drm_mode_object base; + + /** + * @comm: Name of the process allocating the fb, used for fb dumping. + */ + char comm[TASK_COMM_LEN]; + + /** + * @format: framebuffer format information + */ + const struct drm_format_info *format; + /** + * @funcs: framebuffer vfunc table + */ + const struct drm_framebuffer_funcs *funcs; + /** + * @pitches: Line stride per buffer. For userspace created object this + * is copied from drm_mode_fb_cmd2. + */ + unsigned int pitches[4]; + /** + * @offsets: Offset from buffer start to the actual pixel data in bytes, + * per buffer. For userspace created object this is copied from + * drm_mode_fb_cmd2. + * + * Note that this is a linear offset and does not take into account + * tiling or buffer laytou per @modifier. It meant to be used when the + * actual pixel data for this framebuffer plane starts at an offset, + * e.g. when multiple planes are allocated within the same backing + * storage buffer object. For tiled layouts this generally means it + * @offsets must at least be tile-size aligned, but hardware often has + * stricter requirements. + * + * This should not be used to specifiy x/y pixel offsets into the buffer + * data (even for linear buffers). Specifying an x/y pixel offset is + * instead done through the source rectangle in &struct drm_plane_state. + */ + unsigned int offsets[4]; + /** + * @modifier: Data layout modifier. This is used to describe + * tiling, or also special layouts (like compression) of auxiliary + * buffers. For userspace created object this is copied from + * drm_mode_fb_cmd2. + */ + uint64_t modifier; + /** + * @width: Logical width of the visible area of the framebuffer, in + * pixels. + */ + unsigned int width; + /** + * @height: Logical height of the visible area of the framebuffer, in + * pixels. + */ + unsigned int height; + /** + * @flags: Framebuffer flags like DRM_MODE_FB_INTERLACED or + * DRM_MODE_FB_MODIFIERS. + */ + int flags; + /** + * @hot_x: X coordinate of the cursor hotspot. Used by the legacy cursor + * IOCTL when the driver supports cursor through a DRM_PLANE_TYPE_CURSOR + * universal plane. + */ + int hot_x; + /** + * @hot_y: Y coordinate of the cursor hotspot. Used by the legacy cursor + * IOCTL when the driver supports cursor through a DRM_PLANE_TYPE_CURSOR + * universal plane. + */ + int hot_y; + /** + * @filp_head: Placed on &drm_file.fbs, protected by &drm_file.fbs_lock. + */ + struct list_head filp_head; + /** + * @obj: GEM objects backing the framebuffer, one per plane (optional). + * + * This is used by the GEM framebuffer helpers, see e.g. + * drm_gem_fb_create(). + */ + struct drm_gem_object *obj[4]; +}; + +#define obj_to_fb(x) container_of(x, struct drm_framebuffer, base) + +int drm_framebuffer_init(struct drm_device *dev, + struct drm_framebuffer *fb, + const struct drm_framebuffer_funcs *funcs); +struct drm_framebuffer *drm_framebuffer_lookup(struct drm_device *dev, + struct drm_file *file_priv, + uint32_t id); +void drm_framebuffer_remove(struct drm_framebuffer *fb); +void drm_framebuffer_cleanup(struct drm_framebuffer *fb); +void drm_framebuffer_unregister_private(struct drm_framebuffer *fb); + +/** + * drm_framebuffer_get - acquire a framebuffer reference + * @fb: DRM framebuffer + * + * This function increments the framebuffer's reference count. + */ +static inline void drm_framebuffer_get(struct drm_framebuffer *fb) +{ + drm_mode_object_get(&fb->base); +} + +/** + * drm_framebuffer_put - release a framebuffer reference + * @fb: DRM framebuffer + * + * This function decrements the framebuffer's reference count and frees the + * framebuffer if the reference count drops to zero. + */ +static inline void drm_framebuffer_put(struct drm_framebuffer *fb) +{ + drm_mode_object_put(&fb->base); +} + +/** + * drm_framebuffer_read_refcount - read the framebuffer reference count. + * @fb: framebuffer + * + * This functions returns the framebuffer's reference count. + */ +static inline uint32_t drm_framebuffer_read_refcount(const struct drm_framebuffer *fb) +{ + return kref_read(&fb->base.refcount); +} + +/** + * drm_framebuffer_assign - store a reference to the fb + * @p: location to store framebuffer + * @fb: new framebuffer (maybe NULL) + * + * This functions sets the location to store a reference to the framebuffer, + * unreferencing the framebuffer that was previously stored in that location. + */ +static inline void drm_framebuffer_assign(struct drm_framebuffer **p, + struct drm_framebuffer *fb) +{ + if (fb) + drm_framebuffer_get(fb); + if (*p) + drm_framebuffer_put(*p); + *p = fb; +} + +/* + * drm_for_each_fb - iterate over all framebuffers + * @fb: the loop cursor + * @dev: the DRM device + * + * Iterate over all framebuffers of @dev. User must hold + * &drm_mode_config.fb_lock. + */ +#define drm_for_each_fb(fb, dev) \ + for (WARN_ON(!mutex_is_locked(&(dev)->mode_config.fb_lock)), \ + fb = list_first_entry(&(dev)->mode_config.fb_list, \ + struct drm_framebuffer, head); \ + &fb->head != (&(dev)->mode_config.fb_list); \ + fb = list_next_entry(fb, head)) + +int drm_framebuffer_plane_width(int width, + const struct drm_framebuffer *fb, int plane); +int drm_framebuffer_plane_height(int height, + const struct drm_framebuffer *fb, int plane); + +/** + * struct drm_afbc_framebuffer - a special afbc frame buffer object + * + * A derived class of struct drm_framebuffer, dedicated for afbc use cases. + */ +struct drm_afbc_framebuffer { + /** + * @base: base framebuffer structure. + */ + struct drm_framebuffer base; + /** + * @block_width: width of a single afbc block + */ + u32 block_width; + /** + * @block_height: height of a single afbc block + */ + u32 block_height; + /** + * @aligned_width: aligned frame buffer width + */ + u32 aligned_width; + /** + * @aligned_height: aligned frame buffer height + */ + u32 aligned_height; + /** + * @offset: offset of the first afbc header + */ + u32 offset; + /** + * @afbc_size: minimum size of afbc buffer + */ + u32 afbc_size; +}; + +#define fb_to_afbc_fb(x) container_of(x, struct drm_afbc_framebuffer, base) + +#endif |