diff options
Diffstat (limited to 'include/linux/brcmphy.h')
| -rw-r--r-- | include/linux/brcmphy.h | 356 |
1 files changed, 356 insertions, 0 deletions
diff --git a/include/linux/brcmphy.h b/include/linux/brcmphy.h new file mode 100644 index 000000000..54665952d --- /dev/null +++ b/include/linux/brcmphy.h @@ -0,0 +1,356 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef _LINUX_BRCMPHY_H +#define _LINUX_BRCMPHY_H + +#include <linux/phy.h> + +/* All Broadcom Ethernet switches have a pseudo-PHY at address 30 which is used + * to configure the switch internal registers via MDIO accesses. + */ +#define BRCM_PSEUDO_PHY_ADDR 30 + +#define PHY_ID_BCM50610 0x0143bd60 +#define PHY_ID_BCM50610M 0x0143bd70 +#define PHY_ID_BCM5241 0x0143bc30 +#define PHY_ID_BCMAC131 0x0143bc70 +#define PHY_ID_BCM5481 0x0143bca0 +#define PHY_ID_BCM5395 0x0143bcf0 +#define PHY_ID_BCM53125 0x03625f20 +#define PHY_ID_BCM54810 0x03625d00 +#define PHY_ID_BCM54811 0x03625cc0 +#define PHY_ID_BCM5482 0x0143bcb0 +#define PHY_ID_BCM5411 0x00206070 +#define PHY_ID_BCM5421 0x002060e0 +#define PHY_ID_BCM54210E 0x600d84a0 +#define PHY_ID_BCM5464 0x002060b0 +#define PHY_ID_BCM5461 0x002060c0 +#define PHY_ID_BCM54612E 0x03625e60 +#define PHY_ID_BCM54616S 0x03625d10 +#define PHY_ID_BCM54140 0xae025009 +#define PHY_ID_BCM57780 0x03625d90 +#define PHY_ID_BCM89610 0x03625cd0 + +#define PHY_ID_BCM72113 0x35905310 +#define PHY_ID_BCM7250 0xae025280 +#define PHY_ID_BCM7255 0xae025120 +#define PHY_ID_BCM7260 0xae025190 +#define PHY_ID_BCM7268 0xae025090 +#define PHY_ID_BCM7271 0xae0253b0 +#define PHY_ID_BCM7278 0xae0251a0 +#define PHY_ID_BCM7364 0xae025260 +#define PHY_ID_BCM7366 0x600d8490 +#define PHY_ID_BCM7346 0x600d8650 +#define PHY_ID_BCM7362 0x600d84b0 +#define PHY_ID_BCM7425 0x600d86b0 +#define PHY_ID_BCM7429 0x600d8730 +#define PHY_ID_BCM7435 0x600d8750 +#define PHY_ID_BCM74371 0xae0252e0 +#define PHY_ID_BCM7439 0x600d8480 +#define PHY_ID_BCM7439_2 0xae025080 +#define PHY_ID_BCM7445 0x600d8510 + +#define PHY_ID_BCM_CYGNUS 0xae025200 +#define PHY_ID_BCM_OMEGA 0xae025100 + +#define PHY_BCM_OUI_MASK 0xfffffc00 +#define PHY_BCM_OUI_1 0x00206000 +#define PHY_BCM_OUI_2 0x0143bc00 +#define PHY_BCM_OUI_3 0x03625c00 +#define PHY_BCM_OUI_4 0x600d8400 +#define PHY_BCM_OUI_5 0x03625e00 +#define PHY_BCM_OUI_6 0xae025000 + +#define PHY_BCM_FLAGS_MODE_COPPER 0x00000001 +#define PHY_BCM_FLAGS_MODE_1000BX 0x00000002 +#define PHY_BCM_FLAGS_INTF_SGMII 0x00000010 +#define PHY_BCM_FLAGS_INTF_XAUI 0x00000020 +#define PHY_BRCM_WIRESPEED_ENABLE 0x00000100 +#define PHY_BRCM_AUTO_PWRDWN_ENABLE 0x00000200 +#define PHY_BRCM_RX_REFCLK_UNUSED 0x00000400 +#define PHY_BRCM_STD_IBND_DISABLE 0x00000800 +#define PHY_BRCM_EXT_IBND_RX_ENABLE 0x00001000 +#define PHY_BRCM_EXT_IBND_TX_ENABLE 0x00002000 +#define PHY_BRCM_CLEAR_RGMII_MODE 0x00004000 +#define PHY_BRCM_DIS_TXCRXC_NOENRGY 0x00008000 +#define PHY_BRCM_EN_MASTER_MODE 0x00010000 + +/* Broadcom BCM7xxx specific workarounds */ +#define PHY_BRCM_7XXX_REV(x) (((x) >> 8) & 0xff) +#define PHY_BRCM_7XXX_PATCH(x) ((x) & 0xff) +#define PHY_BCM_FLAGS_VALID 0x80000000 + +/* Broadcom BCM54XX register definitions, common to most Broadcom PHYs */ +#define MII_BCM54XX_ECR 0x10 /* BCM54xx extended control register */ +#define MII_BCM54XX_ECR_IM 0x1000 /* Interrupt mask */ +#define MII_BCM54XX_ECR_IF 0x0800 /* Interrupt force */ +#define MII_BCM54XX_ECR_FIFOE 0x0001 /* FIFO elasticity */ + +#define MII_BCM54XX_ESR 0x11 /* BCM54xx extended status register */ +#define MII_BCM54XX_ESR_IS 0x1000 /* Interrupt status */ + +#define MII_BCM54XX_EXP_DATA 0x15 /* Expansion register data */ +#define MII_BCM54XX_EXP_SEL 0x17 /* Expansion register select */ +#define MII_BCM54XX_EXP_SEL_SSD 0x0e00 /* Secondary SerDes select */ +#define MII_BCM54XX_EXP_SEL_ER 0x0f00 /* Expansion register select */ +#define MII_BCM54XX_EXP_SEL_ETC 0x0d00 /* Expansion register spare + 2k mem */ + +#define MII_BCM54XX_AUX_CTL 0x18 /* Auxiliary control register */ +#define MII_BCM54XX_ISR 0x1a /* BCM54xx interrupt status register */ +#define MII_BCM54XX_IMR 0x1b /* BCM54xx interrupt mask register */ +#define MII_BCM54XX_INT_CRCERR 0x0001 /* CRC error */ +#define MII_BCM54XX_INT_LINK 0x0002 /* Link status changed */ +#define MII_BCM54XX_INT_SPEED 0x0004 /* Link speed change */ +#define MII_BCM54XX_INT_DUPLEX 0x0008 /* Duplex mode changed */ +#define MII_BCM54XX_INT_LRS 0x0010 /* Local receiver status changed */ +#define MII_BCM54XX_INT_RRS 0x0020 /* Remote receiver status changed */ +#define MII_BCM54XX_INT_SSERR 0x0040 /* Scrambler synchronization error */ +#define MII_BCM54XX_INT_UHCD 0x0080 /* Unsupported HCD negotiated */ +#define MII_BCM54XX_INT_NHCD 0x0100 /* No HCD */ +#define MII_BCM54XX_INT_NHCDL 0x0200 /* No HCD link */ +#define MII_BCM54XX_INT_ANPR 0x0400 /* Auto-negotiation page received */ +#define MII_BCM54XX_INT_LC 0x0800 /* All counters below 128 */ +#define MII_BCM54XX_INT_HC 0x1000 /* Counter above 32768 */ +#define MII_BCM54XX_INT_MDIX 0x2000 /* MDIX status change */ +#define MII_BCM54XX_INT_PSERR 0x4000 /* Pair swap error */ + +#define MII_BCM54XX_SHD 0x1c /* 0x1c shadow registers */ +#define MII_BCM54XX_SHD_WRITE 0x8000 +#define MII_BCM54XX_SHD_VAL(x) ((x & 0x1f) << 10) +#define MII_BCM54XX_SHD_DATA(x) ((x & 0x3ff) << 0) + +#define MII_BCM54XX_RDB_ADDR 0x1e +#define MII_BCM54XX_RDB_DATA 0x1f + +/* legacy access control via rdb/expansion register */ +#define BCM54XX_RDB_REG0087 0x0087 +#define BCM54XX_EXP_REG7E (MII_BCM54XX_EXP_SEL_ER + 0x7E) +#define BCM54XX_ACCESS_MODE_LEGACY_EN BIT(15) + +/* + * AUXILIARY CONTROL SHADOW ACCESS REGISTERS. (PHY REG 0x18) + */ +#define MII_BCM54XX_AUXCTL_SHDWSEL_AUXCTL 0x00 +#define MII_BCM54XX_AUXCTL_ACTL_TX_6DB 0x0400 +#define MII_BCM54XX_AUXCTL_ACTL_SMDSP_ENA 0x0800 +#define MII_BCM54XX_AUXCTL_ACTL_EXT_PKT_LEN 0x4000 + +#define MII_BCM54XX_AUXCTL_SHDWSEL_MISC 0x07 +#define MII_BCM54XX_AUXCTL_SHDWSEL_MISC_WIRESPEED_EN 0x0010 +#define MII_BCM54XX_AUXCTL_SHDWSEL_MISC_RGMII_EN 0x0080 +#define MII_BCM54XX_AUXCTL_SHDWSEL_MISC_RGMII_SKEW_EN 0x0100 +#define MII_BCM54XX_AUXCTL_MISC_FORCE_AMDIX 0x0200 +#define MII_BCM54XX_AUXCTL_MISC_WREN 0x8000 + +#define MII_BCM54XX_AUXCTL_SHDWSEL_READ_SHIFT 12 +#define MII_BCM54XX_AUXCTL_SHDWSEL_MASK 0x0007 + +/* + * Broadcom LED source encodings. These are used in BCM5461, BCM5481, + * BCM5482, and possibly some others. + */ +#define BCM_LED_SRC_LINKSPD1 0x0 +#define BCM_LED_SRC_LINKSPD2 0x1 +#define BCM_LED_SRC_XMITLED 0x2 +#define BCM_LED_SRC_ACTIVITYLED 0x3 +#define BCM_LED_SRC_FDXLED 0x4 +#define BCM_LED_SRC_SLAVE 0x5 +#define BCM_LED_SRC_INTR 0x6 +#define BCM_LED_SRC_QUALITY 0x7 +#define BCM_LED_SRC_RCVLED 0x8 +#define BCM_LED_SRC_WIRESPEED 0x9 +#define BCM_LED_SRC_MULTICOLOR1 0xa +#define BCM_LED_SRC_OPENSHORT 0xb +#define BCM_LED_SRC_OFF 0xe /* Tied high */ +#define BCM_LED_SRC_ON 0xf /* Tied low */ + +/* + * Broadcom Multicolor LED configurations (expansion register 4) + */ +#define BCM_EXP_MULTICOLOR (MII_BCM54XX_EXP_SEL_ER + 0x04) +#define BCM_LED_MULTICOLOR_IN_PHASE BIT(8) +#define BCM_LED_MULTICOLOR_LINK_ACT 0x0 +#define BCM_LED_MULTICOLOR_SPEED 0x1 +#define BCM_LED_MULTICOLOR_ACT_FLASH 0x2 +#define BCM_LED_MULTICOLOR_FDX 0x3 +#define BCM_LED_MULTICOLOR_OFF 0x4 +#define BCM_LED_MULTICOLOR_ON 0x5 +#define BCM_LED_MULTICOLOR_ALT 0x6 +#define BCM_LED_MULTICOLOR_FLASH 0x7 +#define BCM_LED_MULTICOLOR_LINK 0x8 +#define BCM_LED_MULTICOLOR_ACT 0x9 +#define BCM_LED_MULTICOLOR_PROGRAM 0xa + +/* + * BCM5482: Shadow registers + * Shadow values go into bits [14:10] of register 0x1c to select a shadow + * register to access. + */ + +/* 00100: Reserved control register 2 */ +#define BCM54XX_SHD_SCR2 0x04 +#define BCM54XX_SHD_SCR2_WSPD_RTRY_DIS 0x100 +#define BCM54XX_SHD_SCR2_WSPD_RTRY_LMT_SHIFT 2 +#define BCM54XX_SHD_SCR2_WSPD_RTRY_LMT_OFFSET 2 +#define BCM54XX_SHD_SCR2_WSPD_RTRY_LMT_MASK 0x7 + +/* 00101: Spare Control Register 3 */ +#define BCM54XX_SHD_SCR3 0x05 +#define BCM54XX_SHD_SCR3_DEF_CLK125 0x0001 +#define BCM54XX_SHD_SCR3_DLLAPD_DIS 0x0002 +#define BCM54XX_SHD_SCR3_TRDDAPD 0x0004 + +/* 01010: Auto Power-Down */ +#define BCM54XX_SHD_APD 0x0a +#define BCM_APD_CLR_MASK 0xFE9F /* clear bits 5, 6 & 8 */ +#define BCM54XX_SHD_APD_EN 0x0020 +#define BCM_NO_ANEG_APD_EN 0x0060 /* bits 5 & 6 */ +#define BCM_APD_SINGLELP_EN 0x0100 /* Bit 8 */ + +#define BCM5482_SHD_LEDS1 0x0d /* 01101: LED Selector 1 */ + /* LED3 / ~LINKSPD[2] selector */ +#define BCM5482_SHD_LEDS1_LED3(src) ((src & 0xf) << 4) + /* LED1 / ~LINKSPD[1] selector */ +#define BCM5482_SHD_LEDS1_LED1(src) ((src & 0xf) << 0) +#define BCM54XX_SHD_RGMII_MODE 0x0b /* 01011: RGMII Mode Selector */ +#define BCM5482_SHD_SSD 0x14 /* 10100: Secondary SerDes control */ +#define BCM5482_SHD_SSD_LEDM 0x0008 /* SSD LED Mode enable */ +#define BCM5482_SHD_SSD_EN 0x0001 /* SSD enable */ + +/* 10011: SerDes 100-FX Control Register */ +#define BCM54616S_SHD_100FX_CTRL 0x13 +#define BCM54616S_100FX_MODE BIT(0) /* 100-FX SerDes Enable */ + +/* 11111: Mode Control Register */ +#define BCM54XX_SHD_MODE 0x1f +#define BCM54XX_SHD_INTF_SEL_MASK GENMASK(2, 1) /* INTERF_SEL[1:0] */ +#define BCM54XX_SHD_INTF_SEL_RGMII 0x02 +#define BCM54XX_SHD_INTF_SEL_SGMII 0x04 +#define BCM54XX_SHD_INTF_SEL_GBIC 0x06 +#define BCM54XX_SHD_MODE_1000BX BIT(0) /* Enable 1000-X registers */ + +/* + * EXPANSION SHADOW ACCESS REGISTERS. (PHY REG 0x15, 0x16, and 0x17) + */ +#define MII_BCM54XX_EXP_AADJ1CH0 0x001f +#define MII_BCM54XX_EXP_AADJ1CH0_SWP_ABCD_OEN 0x0200 +#define MII_BCM54XX_EXP_AADJ1CH0_SWSEL_THPF 0x0100 +#define MII_BCM54XX_EXP_AADJ1CH3 0x601f +#define MII_BCM54XX_EXP_AADJ1CH3_ADCCKADJ 0x0002 +#define MII_BCM54XX_EXP_EXP08 0x0F08 +#define MII_BCM54XX_EXP_EXP08_RJCT_2MHZ 0x0001 +#define MII_BCM54XX_EXP_EXP08_EARLY_DAC_WAKE 0x0200 +#define MII_BCM54XX_EXP_EXP75 0x0f75 +#define MII_BCM54XX_EXP_EXP75_VDACCTRL 0x003c +#define MII_BCM54XX_EXP_EXP75_CM_OSC 0x0001 +#define MII_BCM54XX_EXP_EXP96 0x0f96 +#define MII_BCM54XX_EXP_EXP96_MYST 0x0010 +#define MII_BCM54XX_EXP_EXP97 0x0f97 +#define MII_BCM54XX_EXP_EXP97_MYST 0x0c0c + +/* + * BCM5482: Secondary SerDes registers + */ +#define BCM5482_SSD_1000BX_CTL 0x00 /* 1000BASE-X Control */ +#define BCM5482_SSD_1000BX_CTL_PWRDOWN 0x0800 /* Power-down SSD */ +#define BCM5482_SSD_SGMII_SLAVE 0x15 /* SGMII Slave Register */ +#define BCM5482_SSD_SGMII_SLAVE_EN 0x0002 /* Slave mode enable */ +#define BCM5482_SSD_SGMII_SLAVE_AD 0x0001 /* Slave auto-detection */ + +/* BCM54810 Registers */ +#define BCM54810_EXP_BROADREACH_LRE_MISC_CTL (MII_BCM54XX_EXP_SEL_ER + 0x90) +#define BCM54810_EXP_BROADREACH_LRE_MISC_CTL_EN (1 << 0) +#define BCM54810_SHD_CLK_CTL 0x3 +#define BCM54810_SHD_CLK_CTL_GTXCLK_EN (1 << 9) +#define BCM54810_SHD_SCR3_TRDDAPD 0x0100 + +/* BCM54612E Registers */ +#define BCM54612E_EXP_SPARE0 (MII_BCM54XX_EXP_SEL_ETC + 0x34) +#define BCM54612E_LED4_CLK125OUT_EN (1 << 1) + +/*****************************************************************************/ +/* Fast Ethernet Transceiver definitions. */ +/*****************************************************************************/ + +#define MII_BRCM_FET_INTREG 0x1a /* Interrupt register */ +#define MII_BRCM_FET_IR_MASK 0x0100 /* Mask all interrupts */ +#define MII_BRCM_FET_IR_LINK_EN 0x0200 /* Link status change enable */ +#define MII_BRCM_FET_IR_SPEED_EN 0x0400 /* Link speed change enable */ +#define MII_BRCM_FET_IR_DUPLEX_EN 0x0800 /* Duplex mode change enable */ +#define MII_BRCM_FET_IR_ENABLE 0x4000 /* Interrupt enable */ + +#define MII_BRCM_FET_BRCMTEST 0x1f /* Brcm test register */ +#define MII_BRCM_FET_BT_SRE 0x0080 /* Shadow register enable */ + + +/*** Shadow register definitions ***/ + +#define MII_BRCM_FET_SHDW_MISCCTRL 0x10 /* Shadow misc ctrl */ +#define MII_BRCM_FET_SHDW_MC_FAME 0x4000 /* Force Auto MDIX enable */ + +#define MII_BRCM_FET_SHDW_AUXMODE4 0x1a /* Auxiliary mode 4 */ +#define MII_BRCM_FET_SHDW_AM4_LED_MASK 0x0003 +#define MII_BRCM_FET_SHDW_AM4_LED_MODE1 0x0001 + +#define MII_BRCM_FET_SHDW_AUXSTAT2 0x1b /* Auxiliary status 2 */ +#define MII_BRCM_FET_SHDW_AS2_APDE 0x0020 /* Auto power down enable */ + +#define BRCM_CL45VEN_EEE_CONTROL 0x803d +#define LPI_FEATURE_EN 0x8000 +#define LPI_FEATURE_EN_DIG1000X 0x4000 + +/* Core register definitions*/ +#define MII_BRCM_CORE_BASE12 0x12 +#define MII_BRCM_CORE_BASE13 0x13 +#define MII_BRCM_CORE_BASE14 0x14 +#define MII_BRCM_CORE_BASE1E 0x1E +#define MII_BRCM_CORE_EXPB0 0xB0 +#define MII_BRCM_CORE_EXPB1 0xB1 + +/* Enhanced Cable Diagnostics */ +#define BCM54XX_RDB_ECD_CTRL 0x2a0 +#define BCM54XX_EXP_ECD_CTRL (MII_BCM54XX_EXP_SEL_ER + 0xc0) + +#define BCM54XX_ECD_CTRL_CABLE_TYPE_CAT3 1 /* CAT3 or worse */ +#define BCM54XX_ECD_CTRL_CABLE_TYPE_CAT5 0 /* CAT5 or better */ +#define BCM54XX_ECD_CTRL_CABLE_TYPE_MASK BIT(0) /* cable type */ +#define BCM54XX_ECD_CTRL_INVALID BIT(3) /* invalid result */ +#define BCM54XX_ECD_CTRL_UNIT_CM 0 /* centimeters */ +#define BCM54XX_ECD_CTRL_UNIT_M 1 /* meters */ +#define BCM54XX_ECD_CTRL_UNIT_MASK BIT(10) /* cable length unit */ +#define BCM54XX_ECD_CTRL_IN_PROGRESS BIT(11) /* test in progress */ +#define BCM54XX_ECD_CTRL_BREAK_LINK BIT(12) /* unconnect link + * during test + */ +#define BCM54XX_ECD_CTRL_CROSS_SHORT_DIS BIT(13) /* disable inter-pair + * short check + */ +#define BCM54XX_ECD_CTRL_RUN BIT(15) /* run immediate */ + +#define BCM54XX_RDB_ECD_FAULT_TYPE 0x2a1 +#define BCM54XX_EXP_ECD_FAULT_TYPE (MII_BCM54XX_EXP_SEL_ER + 0xc1) +#define BCM54XX_ECD_FAULT_TYPE_INVALID 0x0 +#define BCM54XX_ECD_FAULT_TYPE_OK 0x1 +#define BCM54XX_ECD_FAULT_TYPE_OPEN 0x2 +#define BCM54XX_ECD_FAULT_TYPE_SAME_SHORT 0x3 /* short same pair */ +#define BCM54XX_ECD_FAULT_TYPE_CROSS_SHORT 0x4 /* short different pairs */ +#define BCM54XX_ECD_FAULT_TYPE_BUSY 0x9 +#define BCM54XX_ECD_FAULT_TYPE_PAIR_D_MASK GENMASK(3, 0) +#define BCM54XX_ECD_FAULT_TYPE_PAIR_C_MASK GENMASK(7, 4) +#define BCM54XX_ECD_FAULT_TYPE_PAIR_B_MASK GENMASK(11, 8) +#define BCM54XX_ECD_FAULT_TYPE_PAIR_A_MASK GENMASK(15, 12) +#define BCM54XX_ECD_PAIR_A_LENGTH_RESULTS 0x2a2 +#define BCM54XX_ECD_PAIR_B_LENGTH_RESULTS 0x2a3 +#define BCM54XX_ECD_PAIR_C_LENGTH_RESULTS 0x2a4 +#define BCM54XX_ECD_PAIR_D_LENGTH_RESULTS 0x2a5 + +#define BCM54XX_RDB_ECD_PAIR_A_LENGTH_RESULTS 0x2a2 +#define BCM54XX_EXP_ECD_PAIR_A_LENGTH_RESULTS (MII_BCM54XX_EXP_SEL_ER + 0xc2) +#define BCM54XX_RDB_ECD_PAIR_B_LENGTH_RESULTS 0x2a3 +#define BCM54XX_EXP_ECD_PAIR_B_LENGTH_RESULTS (MII_BCM54XX_EXP_SEL_ER + 0xc3) +#define BCM54XX_RDB_ECD_PAIR_C_LENGTH_RESULTS 0x2a4 +#define BCM54XX_EXP_ECD_PAIR_C_LENGTH_RESULTS (MII_BCM54XX_EXP_SEL_ER + 0xc4) +#define BCM54XX_RDB_ECD_PAIR_D_LENGTH_RESULTS 0x2a5 +#define BCM54XX_EXP_ECD_PAIR_D_LENGTH_RESULTS (MII_BCM54XX_EXP_SEL_ER + 0xc5) +#define BCM54XX_ECD_LENGTH_RESULTS_INVALID 0xffff + +#endif /* _LINUX_BRCMPHY_H */ |