summaryrefslogtreecommitdiffstats
path: root/include/linux/mfd/db8500-prcmu.h
diff options
context:
space:
mode:
Diffstat (limited to 'include/linux/mfd/db8500-prcmu.h')
-rw-r--r--include/linux/mfd/db8500-prcmu.h748
1 files changed, 748 insertions, 0 deletions
diff --git a/include/linux/mfd/db8500-prcmu.h b/include/linux/mfd/db8500-prcmu.h
new file mode 100644
index 000000000..4b63d3ecd
--- /dev/null
+++ b/include/linux/mfd/db8500-prcmu.h
@@ -0,0 +1,748 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) STMicroelectronics 2009
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * Author: Kumar Sanghvi <kumar.sanghvi@stericsson.com>
+ *
+ * PRCMU f/w APIs
+ */
+#ifndef __MFD_DB8500_PRCMU_H
+#define __MFD_DB8500_PRCMU_H
+
+#include <linux/interrupt.h>
+#include <linux/bitops.h>
+
+/*
+ * Registers
+ */
+#define DB8500_PRCM_LINE_VALUE 0x170
+#define DB8500_PRCM_LINE_VALUE_HSI_CAWAKE0 BIT(3)
+
+#define DB8500_PRCM_DSI_SW_RESET 0x324
+#define DB8500_PRCM_DSI_SW_RESET_DSI0_SW_RESETN BIT(0)
+#define DB8500_PRCM_DSI_SW_RESET_DSI1_SW_RESETN BIT(1)
+#define DB8500_PRCM_DSI_SW_RESET_DSI2_SW_RESETN BIT(2)
+
+/* This portion previously known as <mach/prcmu-fw-defs_v1.h> */
+
+/**
+ * enum state - ON/OFF state definition
+ * @OFF: State is ON
+ * @ON: State is OFF
+ *
+ */
+enum state {
+ OFF = 0x0,
+ ON = 0x1,
+};
+
+/**
+ * enum ret_state - general purpose On/Off/Retention states
+ *
+ */
+enum ret_state {
+ OFFST = 0,
+ ONST = 1,
+ RETST = 2
+};
+
+/**
+ * enum clk_arm - ARM Cortex A9 clock schemes
+ * @A9_OFF:
+ * @A9_BOOT:
+ * @A9_OPPT1:
+ * @A9_OPPT2:
+ * @A9_EXTCLK:
+ */
+enum clk_arm {
+ A9_OFF,
+ A9_BOOT,
+ A9_OPPT1,
+ A9_OPPT2,
+ A9_EXTCLK
+};
+
+/**
+ * enum clk_gen - GEN#0/GEN#1 clock schemes
+ * @GEN_OFF:
+ * @GEN_BOOT:
+ * @GEN_OPPT1:
+ */
+enum clk_gen {
+ GEN_OFF,
+ GEN_BOOT,
+ GEN_OPPT1,
+};
+
+/* some information between arm and xp70 */
+
+/**
+ * enum romcode_write - Romcode message written by A9 AND read by XP70
+ * @RDY_2_DS: Value set when ApDeepSleep state can be executed by XP70
+ * @RDY_2_XP70_RST: Value set when 0x0F has been successfully polled by the
+ * romcode. The xp70 will go into self-reset
+ */
+enum romcode_write {
+ RDY_2_DS = 0x09,
+ RDY_2_XP70_RST = 0x10
+};
+
+/**
+ * enum romcode_read - Romcode message written by XP70 and read by A9
+ * @INIT: Init value when romcode field is not used
+ * @FS_2_DS: Value set when power state is going from ApExecute to
+ * ApDeepSleep
+ * @END_DS: Value set when ApDeepSleep power state is reached coming from
+ * ApExecute state
+ * @DS_TO_FS: Value set when power state is going from ApDeepSleep to
+ * ApExecute
+ * @END_FS: Value set when ApExecute power state is reached coming from
+ * ApDeepSleep state
+ * @SWR: Value set when power state is going to ApReset
+ * @END_SWR: Value set when the xp70 finished executing ApReset actions and
+ * waits for romcode acknowledgment to go to self-reset
+ */
+enum romcode_read {
+ INIT = 0x00,
+ FS_2_DS = 0x0A,
+ END_DS = 0x0B,
+ DS_TO_FS = 0x0C,
+ END_FS = 0x0D,
+ SWR = 0x0E,
+ END_SWR = 0x0F
+};
+
+/**
+ * enum ap_pwrst - current power states defined in PRCMU firmware
+ * @NO_PWRST: Current power state init
+ * @AP_BOOT: Current power state is apBoot
+ * @AP_EXECUTE: Current power state is apExecute
+ * @AP_DEEP_SLEEP: Current power state is apDeepSleep
+ * @AP_SLEEP: Current power state is apSleep
+ * @AP_IDLE: Current power state is apIdle
+ * @AP_RESET: Current power state is apReset
+ */
+enum ap_pwrst {
+ NO_PWRST = 0x00,
+ AP_BOOT = 0x01,
+ AP_EXECUTE = 0x02,
+ AP_DEEP_SLEEP = 0x03,
+ AP_SLEEP = 0x04,
+ AP_IDLE = 0x05,
+ AP_RESET = 0x06
+};
+
+/**
+ * enum ap_pwrst_trans - Transition states defined in PRCMU firmware
+ * @NO_TRANSITION: No power state transition
+ * @APEXECUTE_TO_APSLEEP: Power state transition from ApExecute to ApSleep
+ * @APIDLE_TO_APSLEEP: Power state transition from ApIdle to ApSleep
+ * @APBOOT_TO_APEXECUTE: Power state transition from ApBoot to ApExecute
+ * @APEXECUTE_TO_APDEEPSLEEP: Power state transition from ApExecute to
+ * ApDeepSleep
+ * @APEXECUTE_TO_APIDLE: Power state transition from ApExecute to ApIdle
+ */
+enum ap_pwrst_trans {
+ PRCMU_AP_NO_CHANGE = 0x00,
+ APEXECUTE_TO_APSLEEP = 0x01,
+ APIDLE_TO_APSLEEP = 0x02, /* To be removed */
+ PRCMU_AP_SLEEP = 0x01,
+ APBOOT_TO_APEXECUTE = 0x03,
+ APEXECUTE_TO_APDEEPSLEEP = 0x04, /* To be removed */
+ PRCMU_AP_DEEP_SLEEP = 0x04,
+ APEXECUTE_TO_APIDLE = 0x05, /* To be removed */
+ PRCMU_AP_IDLE = 0x05,
+ PRCMU_AP_DEEP_IDLE = 0x07,
+};
+
+/**
+ * enum hw_acc_state - State definition for hardware accelerator
+ * @HW_NO_CHANGE: The hardware accelerator state must remain unchanged
+ * @HW_OFF: The hardware accelerator must be switched off
+ * @HW_OFF_RAMRET: The hardware accelerator must be switched off with its
+ * internal RAM in retention
+ * @HW_ON: The hwa hardware accelerator hwa must be switched on
+ *
+ * NOTE! Deprecated, to be removed when all users switched over to use the
+ * regulator API.
+ */
+enum hw_acc_state {
+ HW_NO_CHANGE = 0x00,
+ HW_OFF = 0x01,
+ HW_OFF_RAMRET = 0x02,
+ HW_ON = 0x04
+};
+
+/**
+ * enum mbox_2_arm_stat - Status messages definition for mbox_arm
+ * @BOOT_TO_EXECUTEOK: The apBoot to apExecute state transition has been
+ * completed
+ * @DEEPSLEEPOK: The apExecute to apDeepSleep state transition has been
+ * completed
+ * @SLEEPOK: The apExecute to apSleep state transition has been completed
+ * @IDLEOK: The apExecute to apIdle state transition has been completed
+ * @SOFTRESETOK: The A9 watchdog/ SoftReset state has been completed
+ * @SOFTRESETGO : The A9 watchdog/SoftReset state is on going
+ * @BOOT_TO_EXECUTE: The apBoot to apExecute state transition is on going
+ * @EXECUTE_TO_DEEPSLEEP: The apExecute to apDeepSleep state transition is on
+ * going
+ * @DEEPSLEEP_TO_EXECUTE: The apDeepSleep to apExecute state transition is on
+ * going
+ * @DEEPSLEEP_TO_EXECUTEOK: The apDeepSleep to apExecute state transition has
+ * been completed
+ * @EXECUTE_TO_SLEEP: The apExecute to apSleep state transition is on going
+ * @SLEEP_TO_EXECUTE: The apSleep to apExecute state transition is on going
+ * @SLEEP_TO_EXECUTEOK: The apSleep to apExecute state transition has been
+ * completed
+ * @EXECUTE_TO_IDLE: The apExecute to apIdle state transition is on going
+ * @IDLE_TO_EXECUTE: The apIdle to apExecute state transition is on going
+ * @IDLE_TO_EXECUTEOK: The apIdle to apExecute state transition has been
+ * completed
+ * @INIT_STATUS: Status init
+ */
+enum ap_pwrsttr_status {
+ BOOT_TO_EXECUTEOK = 0xFF,
+ DEEPSLEEPOK = 0xFE,
+ SLEEPOK = 0xFD,
+ IDLEOK = 0xFC,
+ SOFTRESETOK = 0xFB,
+ SOFTRESETGO = 0xFA,
+ BOOT_TO_EXECUTE = 0xF9,
+ EXECUTE_TO_DEEPSLEEP = 0xF8,
+ DEEPSLEEP_TO_EXECUTE = 0xF7,
+ DEEPSLEEP_TO_EXECUTEOK = 0xF6,
+ EXECUTE_TO_SLEEP = 0xF5,
+ SLEEP_TO_EXECUTE = 0xF4,
+ SLEEP_TO_EXECUTEOK = 0xF3,
+ EXECUTE_TO_IDLE = 0xF2,
+ IDLE_TO_EXECUTE = 0xF1,
+ IDLE_TO_EXECUTEOK = 0xF0,
+ RDYTODS_RETURNTOEXE = 0xEF,
+ NORDYTODS_RETURNTOEXE = 0xEE,
+ EXETOSLEEP_RETURNTOEXE = 0xED,
+ EXETOIDLE_RETURNTOEXE = 0xEC,
+ INIT_STATUS = 0xEB,
+
+ /*error messages */
+ INITERROR = 0x00,
+ PLLARMLOCKP_ER = 0x01,
+ PLLDDRLOCKP_ER = 0x02,
+ PLLSOCLOCKP_ER = 0x03,
+ PLLSOCK1LOCKP_ER = 0x04,
+ ARMWFI_ER = 0x05,
+ SYSCLKOK_ER = 0x06,
+ I2C_NACK_DATA_ER = 0x07,
+ BOOT_ER = 0x08,
+ I2C_STATUS_ALWAYS_1 = 0x0A,
+ I2C_NACK_REG_ADDR_ER = 0x0B,
+ I2C_NACK_DATA0123_ER = 0x1B,
+ I2C_NACK_ADDR_ER = 0x1F,
+ CURAPPWRSTISNOT_BOOT = 0x20,
+ CURAPPWRSTISNOT_EXECUTE = 0x21,
+ CURAPPWRSTISNOT_SLEEPMODE = 0x22,
+ CURAPPWRSTISNOT_CORRECTFORIT10 = 0x23,
+ FIFO4500WUISNOT_WUPEVENT = 0x24,
+ PLL32KLOCKP_ER = 0x29,
+ DDRDEEPSLEEPOK_ER = 0x2A,
+ ROMCODEREADY_ER = 0x50,
+ WUPBEFOREDS = 0x51,
+ DDRCONFIG_ER = 0x52,
+ WUPBEFORESLEEP = 0x53,
+ WUPBEFOREIDLE = 0x54
+}; /* earlier called as mbox_2_arm_stat */
+
+/**
+ * enum dvfs_stat - DVFS status messages definition
+ * @DVFS_GO: A state transition DVFS is on going
+ * @DVFS_ARM100OPPOK: The state transition DVFS has been completed for 100OPP
+ * @DVFS_ARM50OPPOK: The state transition DVFS has been completed for 50OPP
+ * @DVFS_ARMEXTCLKOK: The state transition DVFS has been completed for EXTCLK
+ * @DVFS_NOCHGTCLKOK: The state transition DVFS has been completed for
+ * NOCHGCLK
+ * @DVFS_INITSTATUS: Value init
+ */
+enum dvfs_stat {
+ DVFS_GO = 0xFF,
+ DVFS_ARM100OPPOK = 0xFE,
+ DVFS_ARM50OPPOK = 0xFD,
+ DVFS_ARMEXTCLKOK = 0xFC,
+ DVFS_NOCHGTCLKOK = 0xFB,
+ DVFS_INITSTATUS = 0x00
+};
+
+/**
+ * enum sva_mmdsp_stat - SVA MMDSP status messages
+ * @SVA_MMDSP_GO: SVAMMDSP interrupt has happened
+ * @SVA_MMDSP_INIT: Status init
+ */
+enum sva_mmdsp_stat {
+ SVA_MMDSP_GO = 0xFF,
+ SVA_MMDSP_INIT = 0x00
+};
+
+/**
+ * enum sia_mmdsp_stat - SIA MMDSP status messages
+ * @SIA_MMDSP_GO: SIAMMDSP interrupt has happened
+ * @SIA_MMDSP_INIT: Status init
+ */
+enum sia_mmdsp_stat {
+ SIA_MMDSP_GO = 0xFF,
+ SIA_MMDSP_INIT = 0x00
+};
+
+/**
+ * enum mbox_to_arm_err - Error messages definition
+ * @INIT_ERR: Init value
+ * @PLLARMLOCKP_ERR: PLLARM has not been correctly locked in given time
+ * @PLLDDRLOCKP_ERR: PLLDDR has not been correctly locked in the given time
+ * @PLLSOC0LOCKP_ERR: PLLSOC0 has not been correctly locked in the given time
+ * @PLLSOC1LOCKP_ERR: PLLSOC1 has not been correctly locked in the given time
+ * @ARMWFI_ERR: The ARM WFI has not been correctly executed in the given time
+ * @SYSCLKOK_ERR: The SYSCLK is not available in the given time
+ * @BOOT_ERR: Romcode has not validated the XP70 self reset in the given time
+ * @ROMCODESAVECONTEXT: The Romcode didn.t correctly save it secure context
+ * @VARMHIGHSPEEDVALTO_ERR: The ARM high speed supply value transfered
+ * through I2C has not been correctly executed in the given time
+ * @VARMHIGHSPEEDACCESS_ERR: The command value of VarmHighSpeedVal transfered
+ * through I2C has not been correctly executed in the given time
+ * @VARMLOWSPEEDVALTO_ERR:The ARM low speed supply value transfered through
+ * I2C has not been correctly executed in the given time
+ * @VARMLOWSPEEDACCESS_ERR: The command value of VarmLowSpeedVal transfered
+ * through I2C has not been correctly executed in the given time
+ * @VARMRETENTIONVALTO_ERR: The ARM retention supply value transfered through
+ * I2C has not been correctly executed in the given time
+ * @VARMRETENTIONACCESS_ERR: The command value of VarmRetentionVal transfered
+ * through I2C has not been correctly executed in the given time
+ * @VAPEHIGHSPEEDVALTO_ERR: The APE highspeed supply value transfered through
+ * I2C has not been correctly executed in the given time
+ * @VSAFEHPVALTO_ERR: The SAFE high power supply value transfered through I2C
+ * has not been correctly executed in the given time
+ * @VMODSEL1VALTO_ERR: The MODEM sel1 supply value transfered through I2C has
+ * not been correctly executed in the given time
+ * @VMODSEL2VALTO_ERR: The MODEM sel2 supply value transfered through I2C has
+ * not been correctly executed in the given time
+ * @VARMOFFACCESS_ERR: The command value of Varm ON/OFF transfered through
+ * I2C has not been correctly executed in the given time
+ * @VAPEOFFACCESS_ERR: The command value of Vape ON/OFF transfered through
+ * I2C has not been correctly executed in the given time
+ * @VARMRETACCES_ERR: The command value of Varm retention ON/OFF transfered
+ * through I2C has not been correctly executed in the given time
+ * @CURAPPWRSTISNOTBOOT:Generated when Arm want to do power state transition
+ * ApBoot to ApExecute but the power current state is not Apboot
+ * @CURAPPWRSTISNOTEXECUTE: Generated when Arm want to do power state
+ * transition from ApExecute to others power state but the
+ * power current state is not ApExecute
+ * @CURAPPWRSTISNOTSLEEPMODE: Generated when wake up events are transmitted
+ * but the power current state is not ApDeepSleep/ApSleep/ApIdle
+ * @CURAPPWRSTISNOTCORRECTDBG: Generated when wake up events are transmitted
+ * but the power current state is not correct
+ * @ARMREGU1VALTO_ERR:The ArmRegu1 value transferred through I2C has not
+ * been correctly executed in the given time
+ * @ARMREGU2VALTO_ERR: The ArmRegu2 value transferred through I2C has not
+ * been correctly executed in the given time
+ * @VAPEREGUVALTO_ERR: The VApeRegu value transfered through I2C has not
+ * been correctly executed in the given time
+ * @VSMPS3REGUVALTO_ERR: The VSmps3Regu value transfered through I2C has not
+ * been correctly executed in the given time
+ * @VMODREGUVALTO_ERR: The VModemRegu value transfered through I2C has not
+ * been correctly executed in the given time
+ */
+enum mbox_to_arm_err {
+ INIT_ERR = 0x00,
+ PLLARMLOCKP_ERR = 0x01,
+ PLLDDRLOCKP_ERR = 0x02,
+ PLLSOC0LOCKP_ERR = 0x03,
+ PLLSOC1LOCKP_ERR = 0x04,
+ ARMWFI_ERR = 0x05,
+ SYSCLKOK_ERR = 0x06,
+ BOOT_ERR = 0x07,
+ ROMCODESAVECONTEXT = 0x08,
+ VARMHIGHSPEEDVALTO_ERR = 0x10,
+ VARMHIGHSPEEDACCESS_ERR = 0x11,
+ VARMLOWSPEEDVALTO_ERR = 0x12,
+ VARMLOWSPEEDACCESS_ERR = 0x13,
+ VARMRETENTIONVALTO_ERR = 0x14,
+ VARMRETENTIONACCESS_ERR = 0x15,
+ VAPEHIGHSPEEDVALTO_ERR = 0x16,
+ VSAFEHPVALTO_ERR = 0x17,
+ VMODSEL1VALTO_ERR = 0x18,
+ VMODSEL2VALTO_ERR = 0x19,
+ VARMOFFACCESS_ERR = 0x1A,
+ VAPEOFFACCESS_ERR = 0x1B,
+ VARMRETACCES_ERR = 0x1C,
+ CURAPPWRSTISNOTBOOT = 0x20,
+ CURAPPWRSTISNOTEXECUTE = 0x21,
+ CURAPPWRSTISNOTSLEEPMODE = 0x22,
+ CURAPPWRSTISNOTCORRECTDBG = 0x23,
+ ARMREGU1VALTO_ERR = 0x24,
+ ARMREGU2VALTO_ERR = 0x25,
+ VAPEREGUVALTO_ERR = 0x26,
+ VSMPS3REGUVALTO_ERR = 0x27,
+ VMODREGUVALTO_ERR = 0x28
+};
+
+enum hw_acc {
+ SVAMMDSP = 0,
+ SVAPIPE = 1,
+ SIAMMDSP = 2,
+ SIAPIPE = 3,
+ SGA = 4,
+ B2R2MCDE = 5,
+ ESRAM12 = 6,
+ ESRAM34 = 7,
+};
+
+enum cs_pwrmgt {
+ PWRDNCS0 = 0,
+ WKUPCS0 = 1,
+ PWRDNCS1 = 2,
+ WKUPCS1 = 3
+};
+
+/* Defs related to autonomous power management */
+
+/**
+ * enum sia_sva_pwr_policy - Power policy
+ * @NO_CHGT: No change
+ * @DSPOFF_HWPOFF:
+ * @DSPOFFRAMRET_HWPOFF:
+ * @DSPCLKOFF_HWPOFF:
+ * @DSPCLKOFF_HWPCLKOFF:
+ *
+ */
+enum sia_sva_pwr_policy {
+ NO_CHGT = 0x0,
+ DSPOFF_HWPOFF = 0x1,
+ DSPOFFRAMRET_HWPOFF = 0x2,
+ DSPCLKOFF_HWPOFF = 0x3,
+ DSPCLKOFF_HWPCLKOFF = 0x4,
+};
+
+/**
+ * enum auto_enable - Auto Power enable
+ * @AUTO_OFF:
+ * @AUTO_ON:
+ *
+ */
+enum auto_enable {
+ AUTO_OFF = 0x0,
+ AUTO_ON = 0x1,
+};
+
+/* End of file previously known as prcmu-fw-defs_v1.h */
+
+/**
+ * enum prcmu_power_status - results from set_power_state
+ * @PRCMU_SLEEP_OK: Sleep went ok
+ * @PRCMU_DEEP_SLEEP_OK: DeepSleep went ok
+ * @PRCMU_IDLE_OK: Idle went ok
+ * @PRCMU_DEEPIDLE_OK: DeepIdle went ok
+ * @PRCMU_PRCMU2ARMPENDINGIT_ER: Pending interrupt detected
+ * @PRCMU_ARMPENDINGIT_ER: Pending interrupt detected
+ *
+ */
+enum prcmu_power_status {
+ PRCMU_SLEEP_OK = 0xf3,
+ PRCMU_DEEP_SLEEP_OK = 0xf6,
+ PRCMU_IDLE_OK = 0xf0,
+ PRCMU_DEEPIDLE_OK = 0xe3,
+ PRCMU_PRCMU2ARMPENDINGIT_ER = 0x91,
+ PRCMU_ARMPENDINGIT_ER = 0x93,
+};
+
+/*
+ * Definitions for autonomous power management configuration.
+ */
+
+#define PRCMU_AUTO_PM_OFF 0
+#define PRCMU_AUTO_PM_ON 1
+
+#define PRCMU_AUTO_PM_POWER_ON_HSEM BIT(0)
+#define PRCMU_AUTO_PM_POWER_ON_ABB_FIFO_IT BIT(1)
+
+enum prcmu_auto_pm_policy {
+ PRCMU_AUTO_PM_POLICY_NO_CHANGE,
+ PRCMU_AUTO_PM_POLICY_DSP_OFF_HWP_OFF,
+ PRCMU_AUTO_PM_POLICY_DSP_OFF_RAMRET_HWP_OFF,
+ PRCMU_AUTO_PM_POLICY_DSP_CLK_OFF_HWP_OFF,
+ PRCMU_AUTO_PM_POLICY_DSP_CLK_OFF_HWP_CLK_OFF,
+};
+
+/**
+ * struct prcmu_auto_pm_config - Autonomous power management configuration.
+ * @sia_auto_pm_enable: SIA autonomous pm enable. (PRCMU_AUTO_PM_{OFF,ON})
+ * @sia_power_on: SIA power ON enable. (PRCMU_AUTO_PM_POWER_ON_* bitmask)
+ * @sia_policy: SIA power policy. (enum prcmu_auto_pm_policy)
+ * @sva_auto_pm_enable: SVA autonomous pm enable. (PRCMU_AUTO_PM_{OFF,ON})
+ * @sva_power_on: SVA power ON enable. (PRCMU_AUTO_PM_POWER_ON_* bitmask)
+ * @sva_policy: SVA power policy. (enum prcmu_auto_pm_policy)
+ */
+struct prcmu_auto_pm_config {
+ u8 sia_auto_pm_enable;
+ u8 sia_power_on;
+ u8 sia_policy;
+ u8 sva_auto_pm_enable;
+ u8 sva_power_on;
+ u8 sva_policy;
+};
+
+#ifdef CONFIG_MFD_DB8500_PRCMU
+
+void db8500_prcmu_early_init(void);
+int prcmu_set_rc_a2p(enum romcode_write);
+enum romcode_read prcmu_get_rc_p2a(void);
+enum ap_pwrst prcmu_get_xp70_current_state(void);
+bool prcmu_has_arm_maxopp(void);
+struct prcmu_fw_version *prcmu_get_fw_version(void);
+int prcmu_release_usb_wakeup_state(void);
+void prcmu_configure_auto_pm(struct prcmu_auto_pm_config *sleep,
+ struct prcmu_auto_pm_config *idle);
+bool prcmu_is_auto_pm_enabled(void);
+
+int prcmu_config_clkout(u8 clkout, u8 source, u8 div);
+int prcmu_set_clock_divider(u8 clock, u8 divider);
+int db8500_prcmu_config_hotdog(u8 threshold);
+int db8500_prcmu_config_hotmon(u8 low, u8 high);
+int db8500_prcmu_start_temp_sense(u16 cycles32k);
+int db8500_prcmu_stop_temp_sense(void);
+int prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size);
+int prcmu_abb_write(u8 slave, u8 reg, u8 *value, u8 size);
+
+int prcmu_ac_wake_req(void);
+void prcmu_ac_sleep_req(void);
+void db8500_prcmu_modem_reset(void);
+
+int db8500_prcmu_config_a9wdog(u8 num, bool sleep_auto_off);
+int db8500_prcmu_enable_a9wdog(u8 id);
+int db8500_prcmu_disable_a9wdog(u8 id);
+int db8500_prcmu_kick_a9wdog(u8 id);
+int db8500_prcmu_load_a9wdog(u8 id, u32 val);
+
+void db8500_prcmu_system_reset(u16 reset_code);
+int db8500_prcmu_set_power_state(u8 state, bool keep_ulp_clk, bool keep_ap_pll);
+u8 db8500_prcmu_get_power_state_result(void);
+void db8500_prcmu_enable_wakeups(u32 wakeups);
+int db8500_prcmu_set_epod(u16 epod_id, u8 epod_state);
+int db8500_prcmu_request_clock(u8 clock, bool enable);
+void db8500_prcmu_config_abb_event_readout(u32 abb_events);
+void db8500_prcmu_get_abb_event_buffer(void __iomem **buf);
+int db8500_prcmu_config_esram0_deep_sleep(u8 state);
+u16 db8500_prcmu_get_reset_code(void);
+bool db8500_prcmu_is_ac_wake_requested(void);
+int db8500_prcmu_set_arm_opp(u8 opp);
+int db8500_prcmu_get_arm_opp(void);
+int db8500_prcmu_set_ape_opp(u8 opp);
+int db8500_prcmu_get_ape_opp(void);
+int db8500_prcmu_request_ape_opp_100_voltage(bool enable);
+int db8500_prcmu_get_ddr_opp(void);
+
+u32 db8500_prcmu_read(unsigned int reg);
+void db8500_prcmu_write(unsigned int reg, u32 value);
+void db8500_prcmu_write_masked(unsigned int reg, u32 mask, u32 value);
+
+#else /* !CONFIG_MFD_DB8500_PRCMU */
+
+static inline void db8500_prcmu_early_init(void) {}
+
+static inline int prcmu_set_rc_a2p(enum romcode_write code)
+{
+ return 0;
+}
+
+static inline enum romcode_read prcmu_get_rc_p2a(void)
+{
+ return INIT;
+}
+
+static inline enum ap_pwrst prcmu_get_xp70_current_state(void)
+{
+ return AP_EXECUTE;
+}
+
+static inline bool prcmu_has_arm_maxopp(void)
+{
+ return false;
+}
+
+static inline struct prcmu_fw_version *prcmu_get_fw_version(void)
+{
+ return NULL;
+}
+
+static inline int db8500_prcmu_set_ape_opp(u8 opp)
+{
+ return 0;
+}
+
+static inline int db8500_prcmu_get_ape_opp(void)
+{
+ return APE_100_OPP;
+}
+
+static inline int db8500_prcmu_request_ape_opp_100_voltage(bool enable)
+{
+ return 0;
+}
+
+static inline int prcmu_release_usb_wakeup_state(void)
+{
+ return 0;
+}
+
+static inline int db8500_prcmu_get_ddr_opp(void)
+{
+ return DDR_100_OPP;
+}
+
+static inline void prcmu_configure_auto_pm(struct prcmu_auto_pm_config *sleep,
+ struct prcmu_auto_pm_config *idle)
+{
+}
+
+static inline bool prcmu_is_auto_pm_enabled(void)
+{
+ return false;
+}
+
+static inline int prcmu_config_clkout(u8 clkout, u8 source, u8 div)
+{
+ return 0;
+}
+
+static inline int prcmu_set_clock_divider(u8 clock, u8 divider)
+{
+ return 0;
+}
+
+static inline int db8500_prcmu_config_hotdog(u8 threshold)
+{
+ return 0;
+}
+
+static inline int db8500_prcmu_config_hotmon(u8 low, u8 high)
+{
+ return 0;
+}
+
+static inline int db8500_prcmu_start_temp_sense(u16 cycles32k)
+{
+ return 0;
+}
+
+static inline int db8500_prcmu_stop_temp_sense(void)
+{
+ return 0;
+}
+
+static inline int prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size)
+{
+ return -ENOSYS;
+}
+
+static inline int prcmu_abb_write(u8 slave, u8 reg, u8 *value, u8 size)
+{
+ return -ENOSYS;
+}
+
+static inline int prcmu_ac_wake_req(void)
+{
+ return 0;
+}
+
+static inline void prcmu_ac_sleep_req(void) {}
+
+static inline void db8500_prcmu_modem_reset(void) {}
+
+static inline void db8500_prcmu_system_reset(u16 reset_code) {}
+
+static inline int db8500_prcmu_set_power_state(u8 state, bool keep_ulp_clk,
+ bool keep_ap_pll)
+{
+ return 0;
+}
+
+static inline u8 db8500_prcmu_get_power_state_result(void)
+{
+ return 0;
+}
+
+static inline void db8500_prcmu_enable_wakeups(u32 wakeups) {}
+
+static inline int db8500_prcmu_set_epod(u16 epod_id, u8 epod_state)
+{
+ return 0;
+}
+
+static inline int db8500_prcmu_request_clock(u8 clock, bool enable)
+{
+ return 0;
+}
+
+static inline int db8500_prcmu_config_esram0_deep_sleep(u8 state)
+{
+ return 0;
+}
+
+static inline void db8500_prcmu_config_abb_event_readout(u32 abb_events) {}
+
+static inline void db8500_prcmu_get_abb_event_buffer(void __iomem **buf) {}
+
+static inline u16 db8500_prcmu_get_reset_code(void)
+{
+ return 0;
+}
+
+static inline int db8500_prcmu_config_a9wdog(u8 num, bool sleep_auto_off)
+{
+ return 0;
+}
+
+static inline int db8500_prcmu_enable_a9wdog(u8 id)
+{
+ return 0;
+}
+
+static inline int db8500_prcmu_disable_a9wdog(u8 id)
+{
+ return 0;
+}
+
+static inline int db8500_prcmu_kick_a9wdog(u8 id)
+{
+ return 0;
+}
+
+static inline int db8500_prcmu_load_a9wdog(u8 id, u32 val)
+{
+ return 0;
+}
+
+static inline bool db8500_prcmu_is_ac_wake_requested(void)
+{
+ return 0;
+}
+
+static inline int db8500_prcmu_set_arm_opp(u8 opp)
+{
+ return 0;
+}
+
+static inline int db8500_prcmu_get_arm_opp(void)
+{
+ return 0;
+}
+
+static inline u32 db8500_prcmu_read(unsigned int reg)
+{
+ return 0;
+}
+
+static inline void db8500_prcmu_write(unsigned int reg, u32 value) {}
+
+static inline void db8500_prcmu_write_masked(unsigned int reg, u32 mask,
+ u32 value) {}
+
+#endif /* !CONFIG_MFD_DB8500_PRCMU */
+
+#endif /* __MFD_DB8500_PRCMU_H */