diff options
Diffstat (limited to '')
| -rw-r--r-- | include/media/dvb_frontend.h | 825 |
1 files changed, 825 insertions, 0 deletions
diff --git a/include/media/dvb_frontend.h b/include/media/dvb_frontend.h new file mode 100644 index 000000000..0d76fa455 --- /dev/null +++ b/include/media/dvb_frontend.h @@ -0,0 +1,825 @@ +/* + * dvb_frontend.h + * + * The Digital TV Frontend kABI defines a driver-internal interface for + * registering low-level, hardware specific driver to a hardware independent + * frontend layer. + * + * Copyright (C) 2001 convergence integrated media GmbH + * Copyright (C) 2004 convergence GmbH + * + * Written by Ralph Metzler + * Overhauled by Holger Waechtler + * Kernel I2C stuff by Michael Hunold <hunold@convergence.de> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU Lesser General Public License + * as published by the Free Software Foundation; either version 2.1 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + + * You should have received a copy of the GNU Lesser General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + */ + +#ifndef _DVB_FRONTEND_H_ +#define _DVB_FRONTEND_H_ + +#include <linux/types.h> +#include <linux/sched.h> +#include <linux/ioctl.h> +#include <linux/i2c.h> +#include <linux/module.h> +#include <linux/errno.h> +#include <linux/delay.h> +#include <linux/mutex.h> +#include <linux/slab.h> +#include <linux/bitops.h> + +#include <linux/dvb/frontend.h> + +#include <media/dvbdev.h> + +/* + * Maximum number of Delivery systems per frontend. It + * should be smaller or equal to 32 + */ +#define MAX_DELSYS 8 + +/* Helper definitions to be used at frontend drivers */ +#define kHz 1000UL +#define MHz 1000000UL + +/** + * struct dvb_frontend_tune_settings - parameters to adjust frontend tuning + * + * @min_delay_ms: minimum delay for tuning, in ms + * @step_size: step size between two consecutive frequencies + * @max_drift: maximum drift + * + * NOTE: step_size is in Hz, for terrestrial/cable or kHz for satellite + */ +struct dvb_frontend_tune_settings { + int min_delay_ms; + int step_size; + int max_drift; +}; + +struct dvb_frontend; + +/** + * struct dvb_tuner_info - Frontend name and min/max ranges/bandwidths + * + * @name: name of the Frontend + * @frequency_min_hz: minimal frequency supported in Hz + * @frequency_max_hz: maximum frequency supported in Hz + * @frequency_step_hz: frequency step in Hz + * @bandwidth_min: minimal frontend bandwidth supported + * @bandwidth_max: maximum frontend bandwidth supported + * @bandwidth_step: frontend bandwidth step + */ +struct dvb_tuner_info { + char name[128]; + + u32 frequency_min_hz; + u32 frequency_max_hz; + u32 frequency_step_hz; + + u32 bandwidth_min; + u32 bandwidth_max; + u32 bandwidth_step; +}; + +/** + * struct analog_parameters - Parameters to tune into an analog/radio channel + * + * @frequency: Frequency used by analog TV tuner (either in 62.5 kHz step, + * for TV, or 62.5 Hz for radio) + * @mode: Tuner mode, as defined on enum v4l2_tuner_type + * @audmode: Audio mode as defined for the rxsubchans field at videodev2.h, + * e. g. V4L2_TUNER_MODE_* + * @std: TV standard bitmap as defined at videodev2.h, e. g. V4L2_STD_* + * + * Hybrid tuners should be supported by both V4L2 and DVB APIs. This + * struct contains the data that are used by the V4L2 side. To avoid + * dependencies from V4L2 headers, all enums here are declared as integers. + */ +struct analog_parameters { + unsigned int frequency; + unsigned int mode; + unsigned int audmode; + u64 std; +}; + +/** + * enum dvbfe_algo - defines the algorithm used to tune into a channel + * + * @DVBFE_ALGO_HW: Hardware Algorithm - + * Devices that support this algorithm do everything in hardware + * and no software support is needed to handle them. + * Requesting these devices to LOCK is the only thing required, + * device is supposed to do everything in the hardware. + * + * @DVBFE_ALGO_SW: Software Algorithm - + * These are dumb devices, that require software to do everything + * + * @DVBFE_ALGO_CUSTOM: Customizable Agorithm - + * Devices having this algorithm can be customized to have specific + * algorithms in the frontend driver, rather than simply doing a + * software zig-zag. In this case the zigzag maybe hardware assisted + * or it maybe completely done in hardware. In all cases, usage of + * this algorithm, in conjunction with the search and track + * callbacks, utilizes the driver specific algorithm. + * + * @DVBFE_ALGO_RECOVERY: Recovery Algorithm - + * These devices have AUTO recovery capabilities from LOCK failure + */ +enum dvbfe_algo { + DVBFE_ALGO_HW = BIT(0), + DVBFE_ALGO_SW = BIT(1), + DVBFE_ALGO_CUSTOM = BIT(2), + DVBFE_ALGO_RECOVERY = BIT(31), +}; + +/** + * enum dvbfe_search - search callback possible return status + * + * @DVBFE_ALGO_SEARCH_SUCCESS: + * The frontend search algorithm completed and returned successfully + * + * @DVBFE_ALGO_SEARCH_ASLEEP: + * The frontend search algorithm is sleeping + * + * @DVBFE_ALGO_SEARCH_FAILED: + * The frontend search for a signal failed + * + * @DVBFE_ALGO_SEARCH_INVALID: + * The frontend search algorithm was probably supplied with invalid + * parameters and the search is an invalid one + * + * @DVBFE_ALGO_SEARCH_ERROR: + * The frontend search algorithm failed due to some error + * + * @DVBFE_ALGO_SEARCH_AGAIN: + * The frontend search algorithm was requested to search again + */ +enum dvbfe_search { + DVBFE_ALGO_SEARCH_SUCCESS = BIT(0), + DVBFE_ALGO_SEARCH_ASLEEP = BIT(1), + DVBFE_ALGO_SEARCH_FAILED = BIT(2), + DVBFE_ALGO_SEARCH_INVALID = BIT(3), + DVBFE_ALGO_SEARCH_AGAIN = BIT(4), + DVBFE_ALGO_SEARCH_ERROR = BIT(31), +}; + +/** + * struct dvb_tuner_ops - Tuner information and callbacks + * + * @info: embedded &struct dvb_tuner_info with tuner properties + * @release: callback function called when frontend is detached. + * drivers should free any allocated memory. + * @init: callback function used to initialize the tuner device. + * @sleep: callback function used to put the tuner to sleep. + * @suspend: callback function used to inform that the Kernel will + * suspend. + * @resume: callback function used to inform that the Kernel is + * resuming from suspend. + * @set_params: callback function used to inform the tuner to tune + * into a digital TV channel. The properties to be used + * are stored at &struct dvb_frontend.dtv_property_cache. + * The tuner demod can change the parameters to reflect + * the changes needed for the channel to be tuned, and + * update statistics. This is the recommended way to set + * the tuner parameters and should be used on newer + * drivers. + * @set_analog_params: callback function used to tune into an analog TV + * channel on hybrid tuners. It passes @analog_parameters + * to the driver. + * @set_config: callback function used to send some tuner-specific + * parameters. + * @get_frequency: get the actual tuned frequency + * @get_bandwidth: get the bandwidth used by the low pass filters + * @get_if_frequency: get the Intermediate Frequency, in Hz. For baseband, + * should return 0. + * @get_status: returns the frontend lock status + * @get_rf_strength: returns the RF signal strength. Used mostly to support + * analog TV and radio. Digital TV should report, instead, + * via DVBv5 API (&struct dvb_frontend.dtv_property_cache). + * @get_afc: Used only by analog TV core. Reports the frequency + * drift due to AFC. + * @calc_regs: callback function used to pass register data settings + * for simple tuners. Shouldn't be used on newer drivers. + * @set_frequency: Set a new frequency. Shouldn't be used on newer drivers. + * @set_bandwidth: Set a new frequency. Shouldn't be used on newer drivers. + * + * NOTE: frequencies used on @get_frequency and @set_frequency are in Hz for + * terrestrial/cable or kHz for satellite. + * + */ +struct dvb_tuner_ops { + + struct dvb_tuner_info info; + + void (*release)(struct dvb_frontend *fe); + int (*init)(struct dvb_frontend *fe); + int (*sleep)(struct dvb_frontend *fe); + int (*suspend)(struct dvb_frontend *fe); + int (*resume)(struct dvb_frontend *fe); + + /* This is the recommended way to set the tuner */ + int (*set_params)(struct dvb_frontend *fe); + int (*set_analog_params)(struct dvb_frontend *fe, struct analog_parameters *p); + + int (*set_config)(struct dvb_frontend *fe, void *priv_cfg); + + int (*get_frequency)(struct dvb_frontend *fe, u32 *frequency); + int (*get_bandwidth)(struct dvb_frontend *fe, u32 *bandwidth); + int (*get_if_frequency)(struct dvb_frontend *fe, u32 *frequency); + +#define TUNER_STATUS_LOCKED 1 +#define TUNER_STATUS_STEREO 2 + int (*get_status)(struct dvb_frontend *fe, u32 *status); + int (*get_rf_strength)(struct dvb_frontend *fe, u16 *strength); + int (*get_afc)(struct dvb_frontend *fe, s32 *afc); + + /* + * This is support for demods like the mt352 - fills out the supplied + * buffer with what to write. + * + * Don't use on newer drivers. + */ + int (*calc_regs)(struct dvb_frontend *fe, u8 *buf, int buf_len); + + /* + * These are provided separately from set_params in order to + * facilitate silicon tuners which require sophisticated tuning loops, + * controlling each parameter separately. + * + * Don't use on newer drivers. + */ + int (*set_frequency)(struct dvb_frontend *fe, u32 frequency); + int (*set_bandwidth)(struct dvb_frontend *fe, u32 bandwidth); +}; + +/** + * struct analog_demod_info - Information struct for analog TV part of the demod + * + * @name: Name of the analog TV demodulator + */ +struct analog_demod_info { + char *name; +}; + +/** + * struct analog_demod_ops - Demodulation information and callbacks for + * analog TV and radio + * + * @info: pointer to struct analog_demod_info + * @set_params: callback function used to inform the demod to set the + * demodulator parameters needed to decode an analog or + * radio channel. The properties are passed via + * &struct analog_params. + * @has_signal: returns 0xffff if has signal, or 0 if it doesn't. + * @get_afc: Used only by analog TV core. Reports the frequency + * drift due to AFC. + * @tuner_status: callback function that returns tuner status bits, e. g. + * %TUNER_STATUS_LOCKED and %TUNER_STATUS_STEREO. + * @standby: set the tuner to standby mode. + * @release: callback function called when frontend is detached. + * drivers should free any allocated memory. + * @i2c_gate_ctrl: controls the I2C gate. Newer drivers should use I2C + * mux support instead. + * @set_config: callback function used to send some tuner-specific + * parameters. + */ +struct analog_demod_ops { + + struct analog_demod_info info; + + void (*set_params)(struct dvb_frontend *fe, + struct analog_parameters *params); + int (*has_signal)(struct dvb_frontend *fe, u16 *signal); + int (*get_afc)(struct dvb_frontend *fe, s32 *afc); + void (*tuner_status)(struct dvb_frontend *fe); + void (*standby)(struct dvb_frontend *fe); + void (*release)(struct dvb_frontend *fe); + int (*i2c_gate_ctrl)(struct dvb_frontend *fe, int enable); + + /** This is to allow setting tuner-specific configuration */ + int (*set_config)(struct dvb_frontend *fe, void *priv_cfg); +}; + +struct dtv_frontend_properties; + +/** + * struct dvb_frontend_internal_info - Frontend properties and capabilities + * + * @name: Name of the frontend + * @frequency_min_hz: Minimal frequency supported by the frontend. + * @frequency_max_hz: Minimal frequency supported by the frontend. + * @frequency_stepsize_hz: All frequencies are multiple of this value. + * @frequency_tolerance_hz: Frequency tolerance. + * @symbol_rate_min: Minimal symbol rate, in bauds + * (for Cable/Satellite systems). + * @symbol_rate_max: Maximal symbol rate, in bauds + * (for Cable/Satellite systems). + * @symbol_rate_tolerance: Maximal symbol rate tolerance, in ppm + * (for Cable/Satellite systems). + * @caps: Capabilities supported by the frontend, + * as specified in &enum fe_caps. + */ +struct dvb_frontend_internal_info { + char name[128]; + u32 frequency_min_hz; + u32 frequency_max_hz; + u32 frequency_stepsize_hz; + u32 frequency_tolerance_hz; + u32 symbol_rate_min; + u32 symbol_rate_max; + u32 symbol_rate_tolerance; + enum fe_caps caps; +}; + +/** + * struct dvb_frontend_ops - Demodulation information and callbacks for + * ditialt TV + * + * @info: embedded &struct dvb_tuner_info with tuner properties + * @delsys: Delivery systems supported by the frontend + * @detach: callback function called when frontend is detached. + * drivers should clean up, but not yet free the &struct + * dvb_frontend allocation. + * @release: callback function called when frontend is ready to be + * freed. + * drivers should free any allocated memory. + * @release_sec: callback function requesting that the Satellite Equipment + * Control (SEC) driver to release and free any memory + * allocated by the driver. + * @init: callback function used to initialize the tuner device. + * @sleep: callback function used to put the tuner to sleep. + * @write: callback function used by some demod legacy drivers to + * allow other drivers to write data into their registers. + * Should not be used on new drivers. + * @tune: callback function used by demod drivers that use + * @DVBFE_ALGO_HW to tune into a frequency. + * @get_frontend_algo: returns the desired hardware algorithm. + * @set_frontend: callback function used to inform the demod to set the + * parameters for demodulating a digital TV channel. + * The properties to be used are stored at &struct + * dvb_frontend.dtv_property_cache. The demod can change + * the parameters to reflect the changes needed for the + * channel to be decoded, and update statistics. + * @get_tune_settings: callback function + * @get_frontend: callback function used to inform the parameters + * actuall in use. The properties to be used are stored at + * &struct dvb_frontend.dtv_property_cache and update + * statistics. Please notice that it should not return + * an error code if the statistics are not available + * because the demog is not locked. + * @read_status: returns the locking status of the frontend. + * @read_ber: legacy callback function to return the bit error rate. + * Newer drivers should provide such info via DVBv5 API, + * e. g. @set_frontend;/@get_frontend, implementing this + * callback only if DVBv3 API compatibility is wanted. + * @read_signal_strength: legacy callback function to return the signal + * strength. Newer drivers should provide such info via + * DVBv5 API, e. g. @set_frontend/@get_frontend, + * implementing this callback only if DVBv3 API + * compatibility is wanted. + * @read_snr: legacy callback function to return the Signal/Noise + * rate. Newer drivers should provide such info via + * DVBv5 API, e. g. @set_frontend/@get_frontend, + * implementing this callback only if DVBv3 API + * compatibility is wanted. + * @read_ucblocks: legacy callback function to return the Uncorrected Error + * Blocks. Newer drivers should provide such info via + * DVBv5 API, e. g. @set_frontend/@get_frontend, + * implementing this callback only if DVBv3 API + * compatibility is wanted. + * @diseqc_reset_overload: callback function to implement the + * FE_DISEQC_RESET_OVERLOAD() ioctl (only Satellite) + * @diseqc_send_master_cmd: callback function to implement the + * FE_DISEQC_SEND_MASTER_CMD() ioctl (only Satellite). + * @diseqc_recv_slave_reply: callback function to implement the + * FE_DISEQC_RECV_SLAVE_REPLY() ioctl (only Satellite) + * @diseqc_send_burst: callback function to implement the + * FE_DISEQC_SEND_BURST() ioctl (only Satellite). + * @set_tone: callback function to implement the + * FE_SET_TONE() ioctl (only Satellite). + * @set_voltage: callback function to implement the + * FE_SET_VOLTAGE() ioctl (only Satellite). + * @enable_high_lnb_voltage: callback function to implement the + * FE_ENABLE_HIGH_LNB_VOLTAGE() ioctl (only Satellite). + * @dishnetwork_send_legacy_command: callback function to implement the + * FE_DISHNETWORK_SEND_LEGACY_CMD() ioctl (only Satellite). + * Drivers should not use this, except when the DVB + * core emulation fails to provide proper support (e.g. + * if @set_voltage takes more than 8ms to work), and + * when backward compatibility with this legacy API is + * required. + * @i2c_gate_ctrl: controls the I2C gate. Newer drivers should use I2C + * mux support instead. + * @ts_bus_ctrl: callback function used to take control of the TS bus. + * @set_lna: callback function to power on/off/auto the LNA. + * @search: callback function used on some custom algo search algos. + * @tuner_ops: pointer to &struct dvb_tuner_ops + * @analog_ops: pointer to &struct analog_demod_ops + */ +struct dvb_frontend_ops { + struct dvb_frontend_internal_info info; + + u8 delsys[MAX_DELSYS]; + + void (*detach)(struct dvb_frontend *fe); + void (*release)(struct dvb_frontend* fe); + void (*release_sec)(struct dvb_frontend* fe); + + int (*init)(struct dvb_frontend* fe); + int (*sleep)(struct dvb_frontend* fe); + + int (*write)(struct dvb_frontend* fe, const u8 buf[], int len); + + /* if this is set, it overrides the default swzigzag */ + int (*tune)(struct dvb_frontend* fe, + bool re_tune, + unsigned int mode_flags, + unsigned int *delay, + enum fe_status *status); + + /* get frontend tuning algorithm from the module */ + enum dvbfe_algo (*get_frontend_algo)(struct dvb_frontend *fe); + + /* these two are only used for the swzigzag code */ + int (*set_frontend)(struct dvb_frontend *fe); + int (*get_tune_settings)(struct dvb_frontend* fe, struct dvb_frontend_tune_settings* settings); + + int (*get_frontend)(struct dvb_frontend *fe, + struct dtv_frontend_properties *props); + + int (*read_status)(struct dvb_frontend *fe, enum fe_status *status); + int (*read_ber)(struct dvb_frontend* fe, u32* ber); + int (*read_signal_strength)(struct dvb_frontend* fe, u16* strength); + int (*read_snr)(struct dvb_frontend* fe, u16* snr); + int (*read_ucblocks)(struct dvb_frontend* fe, u32* ucblocks); + + int (*diseqc_reset_overload)(struct dvb_frontend* fe); + int (*diseqc_send_master_cmd)(struct dvb_frontend* fe, struct dvb_diseqc_master_cmd* cmd); + int (*diseqc_recv_slave_reply)(struct dvb_frontend* fe, struct dvb_diseqc_slave_reply* reply); + int (*diseqc_send_burst)(struct dvb_frontend *fe, + enum fe_sec_mini_cmd minicmd); + int (*set_tone)(struct dvb_frontend *fe, enum fe_sec_tone_mode tone); + int (*set_voltage)(struct dvb_frontend *fe, + enum fe_sec_voltage voltage); + int (*enable_high_lnb_voltage)(struct dvb_frontend* fe, long arg); + int (*dishnetwork_send_legacy_command)(struct dvb_frontend* fe, unsigned long cmd); + int (*i2c_gate_ctrl)(struct dvb_frontend* fe, int enable); + int (*ts_bus_ctrl)(struct dvb_frontend* fe, int acquire); + int (*set_lna)(struct dvb_frontend *); + + /* + * These callbacks are for devices that implement their own + * tuning algorithms, rather than a simple swzigzag + */ + enum dvbfe_search (*search)(struct dvb_frontend *fe); + + struct dvb_tuner_ops tuner_ops; + struct analog_demod_ops analog_ops; +}; + +#ifdef __DVB_CORE__ +#define MAX_EVENT 8 + +/* Used only internally at dvb_frontend.c */ +struct dvb_fe_events { + struct dvb_frontend_event events[MAX_EVENT]; + int eventw; + int eventr; + int overflow; + wait_queue_head_t wait_queue; + struct mutex mtx; +}; +#endif + +/** + * struct dtv_frontend_properties - contains a list of properties that are + * specific to a digital TV standard. + * + * @frequency: frequency in Hz for terrestrial/cable or in kHz for + * Satellite + * @modulation: Frontend modulation type + * @voltage: SEC voltage (only Satellite) + * @sectone: SEC tone mode (only Satellite) + * @inversion: Spectral inversion + * @fec_inner: Forward error correction inner Code Rate + * @transmission_mode: Transmission Mode + * @bandwidth_hz: Bandwidth, in Hz. A zero value means that userspace + * wants to autodetect. + * @guard_interval: Guard Interval + * @hierarchy: Hierarchy + * @symbol_rate: Symbol Rate + * @code_rate_HP: high priority stream code rate + * @code_rate_LP: low priority stream code rate + * @pilot: Enable/disable/autodetect pilot tones + * @rolloff: Rolloff factor (alpha) + * @delivery_system: FE delivery system (e. g. digital TV standard) + * @interleaving: interleaving + * @isdbt_partial_reception: ISDB-T partial reception (only ISDB standard) + * @isdbt_sb_mode: ISDB-T Sound Broadcast (SB) mode (only ISDB standard) + * @isdbt_sb_subchannel: ISDB-T SB subchannel (only ISDB standard) + * @isdbt_sb_segment_idx: ISDB-T SB segment index (only ISDB standard) + * @isdbt_sb_segment_count: ISDB-T SB segment count (only ISDB standard) + * @isdbt_layer_enabled: ISDB Layer enabled (only ISDB standard) + * @layer: ISDB per-layer data (only ISDB standard) + * @layer.segment_count: Segment Count; + * @layer.fec: per layer code rate; + * @layer.modulation: per layer modulation; + * @layer.interleaving: per layer interleaving. + * @stream_id: If different than zero, enable substream filtering, if + * hardware supports (DVB-S2 and DVB-T2). + * @scrambling_sequence_index: Carries the index of the DVB-S2 physical layer + * scrambling sequence. + * @atscmh_fic_ver: Version number of the FIC (Fast Information Channel) + * signaling data (only ATSC-M/H) + * @atscmh_parade_id: Parade identification number (only ATSC-M/H) + * @atscmh_nog: Number of MH groups per MH subframe for a designated + * parade (only ATSC-M/H) + * @atscmh_tnog: Total number of MH groups including all MH groups + * belonging to all MH parades in one MH subframe + * (only ATSC-M/H) + * @atscmh_sgn: Start group number (only ATSC-M/H) + * @atscmh_prc: Parade repetition cycle (only ATSC-M/H) + * @atscmh_rs_frame_mode: Reed Solomon (RS) frame mode (only ATSC-M/H) + * @atscmh_rs_frame_ensemble: RS frame ensemble (only ATSC-M/H) + * @atscmh_rs_code_mode_pri: RS code mode pri (only ATSC-M/H) + * @atscmh_rs_code_mode_sec: RS code mode sec (only ATSC-M/H) + * @atscmh_sccc_block_mode: Series Concatenated Convolutional Code (SCCC) + * Block Mode (only ATSC-M/H) + * @atscmh_sccc_code_mode_a: SCCC code mode A (only ATSC-M/H) + * @atscmh_sccc_code_mode_b: SCCC code mode B (only ATSC-M/H) + * @atscmh_sccc_code_mode_c: SCCC code mode C (only ATSC-M/H) + * @atscmh_sccc_code_mode_d: SCCC code mode D (only ATSC-M/H) + * @lna: Power ON/OFF/AUTO the Linear Now-noise Amplifier (LNA) + * @strength: DVBv5 API statistics: Signal Strength + * @cnr: DVBv5 API statistics: Signal to Noise ratio of the + * (main) carrier + * @pre_bit_error: DVBv5 API statistics: pre-Viterbi bit error count + * @pre_bit_count: DVBv5 API statistics: pre-Viterbi bit count + * @post_bit_error: DVBv5 API statistics: post-Viterbi bit error count + * @post_bit_count: DVBv5 API statistics: post-Viterbi bit count + * @block_error: DVBv5 API statistics: block error count + * @block_count: DVBv5 API statistics: block count + * + * NOTE: derivated statistics like Uncorrected Error blocks (UCE) are + * calculated on userspace. + * + * Only a subset of the properties are needed for a given delivery system. + * For more info, consult the media_api.html with the documentation of the + * Userspace API. + */ +struct dtv_frontend_properties { + u32 frequency; + enum fe_modulation modulation; + + enum fe_sec_voltage voltage; + enum fe_sec_tone_mode sectone; + enum fe_spectral_inversion inversion; + enum fe_code_rate fec_inner; + enum fe_transmit_mode transmission_mode; + u32 bandwidth_hz; /* 0 = AUTO */ + enum fe_guard_interval guard_interval; + enum fe_hierarchy hierarchy; + u32 symbol_rate; + enum fe_code_rate code_rate_HP; + enum fe_code_rate code_rate_LP; + + enum fe_pilot pilot; + enum fe_rolloff rolloff; + + enum fe_delivery_system delivery_system; + + enum fe_interleaving interleaving; + + /* ISDB-T specifics */ + u8 isdbt_partial_reception; + u8 isdbt_sb_mode; + u8 isdbt_sb_subchannel; + u32 isdbt_sb_segment_idx; + u32 isdbt_sb_segment_count; + u8 isdbt_layer_enabled; + struct { + u8 segment_count; + enum fe_code_rate fec; + enum fe_modulation modulation; + u8 interleaving; + } layer[3]; + + /* Multistream specifics */ + u32 stream_id; + + /* Physical Layer Scrambling specifics */ + u32 scrambling_sequence_index; + + /* ATSC-MH specifics */ + u8 atscmh_fic_ver; + u8 atscmh_parade_id; + u8 atscmh_nog; + u8 atscmh_tnog; + u8 atscmh_sgn; + u8 atscmh_prc; + + u8 atscmh_rs_frame_mode; + u8 atscmh_rs_frame_ensemble; + u8 atscmh_rs_code_mode_pri; + u8 atscmh_rs_code_mode_sec; + u8 atscmh_sccc_block_mode; + u8 atscmh_sccc_code_mode_a; + u8 atscmh_sccc_code_mode_b; + u8 atscmh_sccc_code_mode_c; + u8 atscmh_sccc_code_mode_d; + + u32 lna; + + /* statistics data */ + struct dtv_fe_stats strength; + struct dtv_fe_stats cnr; + struct dtv_fe_stats pre_bit_error; + struct dtv_fe_stats pre_bit_count; + struct dtv_fe_stats post_bit_error; + struct dtv_fe_stats post_bit_count; + struct dtv_fe_stats block_error; + struct dtv_fe_stats block_count; +}; + +#define DVB_FE_NO_EXIT 0 +#define DVB_FE_NORMAL_EXIT 1 +#define DVB_FE_DEVICE_REMOVED 2 +#define DVB_FE_DEVICE_RESUME 3 + +/** + * struct dvb_frontend - Frontend structure to be used on drivers. + * + * @refcount: refcount to keep track of &struct dvb_frontend + * references + * @ops: embedded &struct dvb_frontend_ops + * @dvb: pointer to &struct dvb_adapter + * @demodulator_priv: demod private data + * @tuner_priv: tuner private data + * @frontend_priv: frontend private data + * @sec_priv: SEC private data + * @analog_demod_priv: Analog demod private data + * @dtv_property_cache: embedded &struct dtv_frontend_properties + * @callback: callback function used on some drivers to call + * either the tuner or the demodulator. + * @id: Frontend ID + * @exit: Used to inform the DVB core that the frontend + * thread should exit (usually, means that the hardware + * got disconnected. + */ + +struct dvb_frontend { + struct kref refcount; + struct dvb_frontend_ops ops; + struct dvb_adapter *dvb; + void *demodulator_priv; + void *tuner_priv; + void *frontend_priv; + void *sec_priv; + void *analog_demod_priv; + struct dtv_frontend_properties dtv_property_cache; +#define DVB_FRONTEND_COMPONENT_TUNER 0 +#define DVB_FRONTEND_COMPONENT_DEMOD 1 + int (*callback)(void *adapter_priv, int component, int cmd, int arg); + int id; + unsigned int exit; +}; + +/** + * dvb_register_frontend() - Registers a DVB frontend at the adapter + * + * @dvb: pointer to &struct dvb_adapter + * @fe: pointer to &struct dvb_frontend + * + * Allocate and initialize the private data needed by the frontend core to + * manage the frontend and calls dvb_register_device() to register a new + * frontend. It also cleans the property cache that stores the frontend + * parameters and selects the first available delivery system. + */ +int dvb_register_frontend(struct dvb_adapter *dvb, + struct dvb_frontend *fe); + +/** + * dvb_unregister_frontend() - Unregisters a DVB frontend + * + * @fe: pointer to &struct dvb_frontend + * + * Stops the frontend kthread, calls dvb_unregister_device() and frees the + * private frontend data allocated by dvb_register_frontend(). + * + * NOTE: This function doesn't frees the memory allocated by the demod, + * by the SEC driver and by the tuner. In order to free it, an explicit call to + * dvb_frontend_detach() is needed, after calling this function. + */ +int dvb_unregister_frontend(struct dvb_frontend *fe); + +/** + * dvb_frontend_detach() - Detaches and frees frontend specific data + * + * @fe: pointer to &struct dvb_frontend + * + * This function should be called after dvb_unregister_frontend(). It + * calls the SEC, tuner and demod release functions: + * &dvb_frontend_ops.release_sec, &dvb_frontend_ops.tuner_ops.release, + * &dvb_frontend_ops.analog_ops.release and &dvb_frontend_ops.release. + * + * If the driver is compiled with %CONFIG_MEDIA_ATTACH, it also decreases + * the module reference count, needed to allow userspace to remove the + * previously used DVB frontend modules. + */ +void dvb_frontend_detach(struct dvb_frontend *fe); + +/** + * dvb_frontend_suspend() - Suspends a Digital TV frontend + * + * @fe: pointer to &struct dvb_frontend + * + * This function prepares a Digital TV frontend to suspend. + * + * In order to prepare the tuner to suspend, if + * &dvb_frontend_ops.tuner_ops.suspend\(\) is available, it calls it. Otherwise, + * it will call &dvb_frontend_ops.tuner_ops.sleep\(\), if available. + * + * It will also call &dvb_frontend_ops.sleep\(\) to put the demod to suspend. + * + * The drivers should also call dvb_frontend_suspend\(\) as part of their + * handler for the &device_driver.suspend\(\). + */ +int dvb_frontend_suspend(struct dvb_frontend *fe); + +/** + * dvb_frontend_resume() - Resumes a Digital TV frontend + * + * @fe: pointer to &struct dvb_frontend + * + * This function resumes the usual operation of the tuner after resume. + * + * In order to resume the frontend, it calls the demod &dvb_frontend_ops.init\(\). + * + * If &dvb_frontend_ops.tuner_ops.resume\(\) is available, It, it calls it. + * Otherwise,t will call &dvb_frontend_ops.tuner_ops.init\(\), if available. + * + * Once tuner and demods are resumed, it will enforce that the SEC voltage and + * tone are restored to their previous values and wake up the frontend's + * kthread in order to retune the frontend. + * + * The drivers should also call dvb_frontend_resume() as part of their + * handler for the &device_driver.resume\(\). + */ +int dvb_frontend_resume(struct dvb_frontend *fe); + +/** + * dvb_frontend_reinitialise() - forces a reinitialisation at the frontend + * + * @fe: pointer to &struct dvb_frontend + * + * Calls &dvb_frontend_ops.init\(\) and &dvb_frontend_ops.tuner_ops.init\(\), + * and resets SEC tone and voltage (for Satellite systems). + * + * NOTE: Currently, this function is used only by one driver (budget-av). + * It seems to be due to address some special issue with that specific + * frontend. + */ +void dvb_frontend_reinitialise(struct dvb_frontend *fe); + +/** + * dvb_frontend_sleep_until() - Sleep for the amount of time given by + * add_usec parameter + * + * @waketime: pointer to &struct ktime_t + * @add_usec: time to sleep, in microseconds + * + * This function is used to measure the time required for the + * FE_DISHNETWORK_SEND_LEGACY_CMD() ioctl to work. It needs to be as precise + * as possible, as it affects the detection of the dish tone command at the + * satellite subsystem. + * + * Its used internally by the DVB frontend core, in order to emulate + * FE_DISHNETWORK_SEND_LEGACY_CMD() using the &dvb_frontend_ops.set_voltage\(\) + * callback. + * + * NOTE: it should not be used at the drivers, as the emulation for the + * legacy callback is provided by the Kernel. The only situation where this + * should be at the drivers is when there are some bugs at the hardware that + * would prevent the core emulation to work. On such cases, the driver would + * be writing a &dvb_frontend_ops.dishnetwork_send_legacy_command\(\) and + * calling this function directly. + */ +void dvb_frontend_sleep_until(ktime_t *waketime, u32 add_usec); + +#endif |