diff options
Diffstat (limited to 'include/media')
136 files changed, 26846 insertions, 0 deletions
diff --git a/include/media/cec-notifier.h b/include/media/cec-notifier.h new file mode 100644 index 000000000..b1c839734 --- /dev/null +++ b/include/media/cec-notifier.h @@ -0,0 +1,166 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * cec-notifier.h - notify CEC drivers of physical address changes + * + * Copyright 2016 Russell King. + * Copyright 2016-2017 Cisco Systems, Inc. and/or its affiliates. All rights reserved. + */ + +#ifndef LINUX_CEC_NOTIFIER_H +#define LINUX_CEC_NOTIFIER_H + +#include <linux/err.h> +#include <media/cec.h> + +struct device; +struct edid; +struct cec_adapter; +struct cec_notifier; + +#if IS_REACHABLE(CONFIG_CEC_CORE) && IS_ENABLED(CONFIG_CEC_NOTIFIER) + +/** + * cec_notifier_conn_register - find or create a new cec_notifier for the given + * HDMI device and connector tuple. + * @hdmi_dev: HDMI device that sends the events. + * @port_name: the connector name from which the event occurs. May be NULL + * if there is always only one HDMI connector created by the HDMI device. + * @conn_info: the connector info from which the event occurs (may be NULL) + * + * If a notifier for device @dev and connector @port_name already exists, then + * increase the refcount and return that notifier. + * + * If it doesn't exist, then allocate a new notifier struct and return a + * pointer to that new struct. + * + * Return NULL if the memory could not be allocated. + */ +struct cec_notifier * +cec_notifier_conn_register(struct device *hdmi_dev, const char *port_name, + const struct cec_connector_info *conn_info); + +/** + * cec_notifier_conn_unregister - decrease refcount and delete when the + * refcount reaches 0. + * @n: notifier. If NULL, then this function does nothing. + */ +void cec_notifier_conn_unregister(struct cec_notifier *n); + +/** + * cec_notifier_cec_adap_register - find or create a new cec_notifier for the + * given device. + * @hdmi_dev: HDMI device that sends the events. + * @port_name: the connector name from which the event occurs. May be NULL + * if there is always only one HDMI connector created by the HDMI device. + * @adap: the cec adapter that registered this notifier. + * + * If a notifier for device @dev and connector @port_name already exists, then + * increase the refcount and return that notifier. + * + * If it doesn't exist, then allocate a new notifier struct and return a + * pointer to that new struct. + * + * Return NULL if the memory could not be allocated. + */ +struct cec_notifier * +cec_notifier_cec_adap_register(struct device *hdmi_dev, const char *port_name, + struct cec_adapter *adap); + +/** + * cec_notifier_cec_adap_unregister - decrease refcount and delete when the + * refcount reaches 0. + * @n: notifier. If NULL, then this function does nothing. + * @adap: the cec adapter that registered this notifier. + */ +void cec_notifier_cec_adap_unregister(struct cec_notifier *n, + struct cec_adapter *adap); + +/** + * cec_notifier_set_phys_addr - set a new physical address. + * @n: the CEC notifier + * @pa: the CEC physical address + * + * Set a new CEC physical address. + * Does nothing if @n == NULL. + */ +void cec_notifier_set_phys_addr(struct cec_notifier *n, u16 pa); + +/** + * cec_notifier_set_phys_addr_from_edid - set parse the PA from the EDID. + * @n: the CEC notifier + * @edid: the struct edid pointer + * + * Parses the EDID to obtain the new CEC physical address and set it. + * Does nothing if @n == NULL. + */ +void cec_notifier_set_phys_addr_from_edid(struct cec_notifier *n, + const struct edid *edid); + +/** + * cec_notifier_parse_hdmi_phandle - find the hdmi device from "hdmi-phandle" + * @dev: the device with the "hdmi-phandle" device tree property + * + * Returns the device pointer referenced by the "hdmi-phandle" property. + * Note that the refcount of the returned device is not incremented. + * This device pointer is only used as a key value in the notifier + * list, but it is never accessed by the CEC driver. + */ +struct device *cec_notifier_parse_hdmi_phandle(struct device *dev); + +#else + +static inline struct cec_notifier * +cec_notifier_conn_register(struct device *hdmi_dev, const char *port_name, + const struct cec_connector_info *conn_info) +{ + /* A non-NULL pointer is expected on success */ + return (struct cec_notifier *)0xdeadfeed; +} + +static inline void cec_notifier_conn_unregister(struct cec_notifier *n) +{ +} + +static inline struct cec_notifier * +cec_notifier_cec_adap_register(struct device *hdmi_dev, const char *port_name, + struct cec_adapter *adap) +{ + /* A non-NULL pointer is expected on success */ + return (struct cec_notifier *)0xdeadfeed; +} + +static inline void cec_notifier_cec_adap_unregister(struct cec_notifier *n, + struct cec_adapter *adap) +{ +} + +static inline void cec_notifier_set_phys_addr(struct cec_notifier *n, u16 pa) +{ +} + +static inline void cec_notifier_set_phys_addr_from_edid(struct cec_notifier *n, + const struct edid *edid) +{ +} + +static inline struct device *cec_notifier_parse_hdmi_phandle(struct device *dev) +{ + return ERR_PTR(-ENODEV); +} + +#endif + +/** + * cec_notifier_phys_addr_invalidate() - set the physical address to INVALID + * + * @n: the CEC notifier + * + * This is a simple helper function to invalidate the physical + * address. Does nothing if @n == NULL. + */ +static inline void cec_notifier_phys_addr_invalidate(struct cec_notifier *n) +{ + cec_notifier_set_phys_addr(n, CEC_PHYS_ADDR_INVALID); +} + +#endif diff --git a/include/media/cec-pin.h b/include/media/cec-pin.h new file mode 100644 index 000000000..483bc4769 --- /dev/null +++ b/include/media/cec-pin.h @@ -0,0 +1,79 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * cec-pin.h - low-level CEC pin control + * + * Copyright 2017 Cisco Systems, Inc. and/or its affiliates. All rights reserved. + */ + +#ifndef LINUX_CEC_PIN_H +#define LINUX_CEC_PIN_H + +#include <linux/types.h> +#include <media/cec.h> + +/** + * struct cec_pin_ops - low-level CEC pin operations + * @read: read the CEC pin. Returns > 0 if high, 0 if low, or an error + * if negative. + * @low: drive the CEC pin low. + * @high: stop driving the CEC pin. The pull-up will drive the pin + * high, unless someone else is driving the pin low. + * @enable_irq: optional, enable the interrupt to detect pin voltage changes. + * @disable_irq: optional, disable the interrupt. + * @free: optional. Free any allocated resources. Called when the + * adapter is deleted. + * @status: optional, log status information. + * @read_hpd: optional. Read the HPD pin. Returns > 0 if high, 0 if low or + * an error if negative. + * @read_5v: optional. Read the 5V pin. Returns > 0 if high, 0 if low or + * an error if negative. + * @received: optional. High-level CEC message callback. Allows the driver + * to process CEC messages. + * + * These operations (except for the @received op) are used by the + * cec pin framework to manipulate the CEC pin. + */ +struct cec_pin_ops { + int (*read)(struct cec_adapter *adap); + void (*low)(struct cec_adapter *adap); + void (*high)(struct cec_adapter *adap); + bool (*enable_irq)(struct cec_adapter *adap); + void (*disable_irq)(struct cec_adapter *adap); + void (*free)(struct cec_adapter *adap); + void (*status)(struct cec_adapter *adap, struct seq_file *file); + int (*read_hpd)(struct cec_adapter *adap); + int (*read_5v)(struct cec_adapter *adap); + + /* High-level CEC message callback */ + int (*received)(struct cec_adapter *adap, struct cec_msg *msg); +}; + +/** + * cec_pin_changed() - update pin state from interrupt + * + * @adap: pointer to the cec adapter + * @value: when true the pin is high, otherwise it is low + * + * If changes of the CEC voltage are detected via an interrupt, then + * cec_pin_changed is called from the interrupt with the new value. + */ +void cec_pin_changed(struct cec_adapter *adap, bool value); + +/** + * cec_pin_allocate_adapter() - allocate a pin-based cec adapter + * + * @pin_ops: low-level pin operations + * @priv: will be stored in adap->priv and can be used by the adapter ops. + * Use cec_get_drvdata(adap) to get the priv pointer. + * @name: the name of the CEC adapter. Note: this name will be copied. + * @caps: capabilities of the CEC adapter. This will be ORed with + * CEC_CAP_MONITOR_ALL and CEC_CAP_MONITOR_PIN. + * + * Allocate a cec adapter using the cec pin framework. + * + * Return: a pointer to the cec adapter or an error pointer + */ +struct cec_adapter *cec_pin_allocate_adapter(const struct cec_pin_ops *pin_ops, + void *priv, const char *name, u32 caps); + +#endif diff --git a/include/media/cec.h b/include/media/cec.h new file mode 100644 index 000000000..cd35ae6b7 --- /dev/null +++ b/include/media/cec.h @@ -0,0 +1,523 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * cec - HDMI Consumer Electronics Control support header + * + * Copyright 2016 Cisco Systems, Inc. and/or its affiliates. All rights reserved. + */ + +#ifndef _MEDIA_CEC_H +#define _MEDIA_CEC_H + +#include <linux/poll.h> +#include <linux/fs.h> +#include <linux/debugfs.h> +#include <linux/device.h> +#include <linux/cdev.h> +#include <linux/kthread.h> +#include <linux/timer.h> +#include <linux/cec-funcs.h> +#include <media/rc-core.h> + +#define CEC_CAP_DEFAULTS (CEC_CAP_LOG_ADDRS | CEC_CAP_TRANSMIT | \ + CEC_CAP_PASSTHROUGH | CEC_CAP_RC) + +/** + * struct cec_devnode - cec device node + * @dev: cec device + * @cdev: cec character device + * @minor: device node minor number + * @registered: the device was correctly registered + * @unregistered: the device was unregistered + * @fhs_lock: lock to control access to the filehandle list + * @fhs: the list of open filehandles (cec_fh) + * + * This structure represents a cec-related device node. + * + * The @parent is a physical device. It must be set by core or device drivers + * before registering the node. + */ +struct cec_devnode { + /* sysfs */ + struct device dev; + struct cdev cdev; + + /* device info */ + int minor; + bool registered; + bool unregistered; + struct list_head fhs; + struct mutex lock; +}; + +struct cec_adapter; +struct cec_data; +struct cec_pin; +struct cec_notifier; + +struct cec_data { + struct list_head list; + struct list_head xfer_list; + struct cec_adapter *adap; + struct cec_msg msg; + struct cec_fh *fh; + struct delayed_work work; + struct completion c; + u8 attempts; + bool blocking; + bool completed; +}; + +struct cec_msg_entry { + struct list_head list; + struct cec_msg msg; +}; + +struct cec_event_entry { + struct list_head list; + struct cec_event ev; +}; + +#define CEC_NUM_CORE_EVENTS 2 +#define CEC_NUM_EVENTS CEC_EVENT_PIN_5V_HIGH + +struct cec_fh { + struct list_head list; + struct list_head xfer_list; + struct cec_adapter *adap; + u8 mode_initiator; + u8 mode_follower; + + /* Events */ + wait_queue_head_t wait; + struct mutex lock; + struct list_head events[CEC_NUM_EVENTS]; /* queued events */ + u16 queued_events[CEC_NUM_EVENTS]; + unsigned int total_queued_events; + struct cec_event_entry core_events[CEC_NUM_CORE_EVENTS]; + struct list_head msgs; /* queued messages */ + unsigned int queued_msgs; +}; + +#define CEC_SIGNAL_FREE_TIME_RETRY 3 +#define CEC_SIGNAL_FREE_TIME_NEW_INITIATOR 5 +#define CEC_SIGNAL_FREE_TIME_NEXT_XFER 7 + +/* The nominal data bit period is 2.4 ms */ +#define CEC_FREE_TIME_TO_USEC(ft) ((ft) * 2400) + +struct cec_adap_ops { + /* Low-level callbacks */ + int (*adap_enable)(struct cec_adapter *adap, bool enable); + int (*adap_monitor_all_enable)(struct cec_adapter *adap, bool enable); + int (*adap_monitor_pin_enable)(struct cec_adapter *adap, bool enable); + int (*adap_log_addr)(struct cec_adapter *adap, u8 logical_addr); + int (*adap_transmit)(struct cec_adapter *adap, u8 attempts, + u32 signal_free_time, struct cec_msg *msg); + void (*adap_status)(struct cec_adapter *adap, struct seq_file *file); + void (*adap_free)(struct cec_adapter *adap); + + /* Error injection callbacks */ + int (*error_inj_show)(struct cec_adapter *adap, struct seq_file *sf); + bool (*error_inj_parse_line)(struct cec_adapter *adap, char *line); + + /* High-level CEC message callback */ + int (*received)(struct cec_adapter *adap, struct cec_msg *msg); +}; + +/* + * The minimum message length you can receive (excepting poll messages) is 2. + * With a transfer rate of at most 36 bytes per second this makes 18 messages + * per second worst case. + * + * We queue at most 3 seconds worth of received messages. The CEC specification + * requires that messages are replied to within a second, so 3 seconds should + * give more than enough margin. Since most messages are actually more than 2 + * bytes, this is in practice a lot more than 3 seconds. + */ +#define CEC_MAX_MSG_RX_QUEUE_SZ (18 * 3) + +/* + * The transmit queue is limited to 1 second worth of messages (worst case). + * Messages can be transmitted by userspace and kernel space. But for both it + * makes no sense to have a lot of messages queued up. One second seems + * reasonable. + */ +#define CEC_MAX_MSG_TX_QUEUE_SZ (18 * 1) + +/** + * struct cec_adapter - cec adapter structure + * @owner: module owner + * @name: name of the CEC adapter + * @devnode: device node for the /dev/cecX device + * @lock: mutex controlling access to this structure + * @rc: remote control device + * @transmit_queue: queue of pending transmits + * @transmit_queue_sz: number of pending transmits + * @wait_queue: queue of transmits waiting for a reply + * @transmitting: CEC messages currently being transmitted + * @transmit_in_progress: true if a transmit is in progress + * @kthread_config: kthread used to configure a CEC adapter + * @config_completion: used to signal completion of the config kthread + * @kthread: main CEC processing thread + * @kthread_waitq: main CEC processing wait_queue + * @ops: cec adapter ops + * @priv: cec driver's private data + * @capabilities: cec adapter capabilities + * @available_log_addrs: maximum number of available logical addresses + * @phys_addr: the current physical address + * @needs_hpd: if true, then the HDMI HotPlug Detect pin must be high + * in order to transmit or receive CEC messages. This is usually a HW + * limitation. + * @is_configuring: the CEC adapter is configuring (i.e. claiming LAs) + * @is_configured: the CEC adapter is configured (i.e. has claimed LAs) + * @cec_pin_is_high: if true then the CEC pin is high. Only used with the + * CEC pin framework. + * @adap_controls_phys_addr: if true, then the CEC adapter controls the + * physical address, i.e. the CEC hardware can detect HPD changes and + * read the EDID and is not dependent on an external HDMI driver. + * Drivers that need this can set this field to true after the + * cec_allocate_adapter() call. + * @last_initiator: the initiator of the last transmitted message. + * @monitor_all_cnt: number of filehandles monitoring all msgs + * @monitor_pin_cnt: number of filehandles monitoring pin changes + * @follower_cnt: number of filehandles in follower mode + * @cec_follower: filehandle of the exclusive follower + * @cec_initiator: filehandle of the exclusive initiator + * @passthrough: if true, then the exclusive follower is in + * passthrough mode. + * @log_addrs: current logical addresses + * @conn_info: current connector info + * @tx_timeouts: number of transmit timeouts + * @notifier: CEC notifier + * @pin: CEC pin status struct + * @cec_dir: debugfs cec directory + * @status_file: debugfs cec status file + * @error_inj_file: debugfs cec error injection file + * @sequence: transmit sequence counter + * @input_phys: remote control input_phys name + * + * This structure represents a cec adapter. + */ +struct cec_adapter { + struct module *owner; + char name[32]; + struct cec_devnode devnode; + struct mutex lock; + struct rc_dev *rc; + + struct list_head transmit_queue; + unsigned int transmit_queue_sz; + struct list_head wait_queue; + struct cec_data *transmitting; + bool transmit_in_progress; + + struct task_struct *kthread_config; + struct completion config_completion; + + struct task_struct *kthread; + wait_queue_head_t kthread_waitq; + + const struct cec_adap_ops *ops; + void *priv; + u32 capabilities; + u8 available_log_addrs; + + u16 phys_addr; + bool needs_hpd; + bool is_configuring; + bool is_configured; + bool cec_pin_is_high; + bool adap_controls_phys_addr; + u8 last_initiator; + u32 monitor_all_cnt; + u32 monitor_pin_cnt; + u32 follower_cnt; + struct cec_fh *cec_follower; + struct cec_fh *cec_initiator; + bool passthrough; + struct cec_log_addrs log_addrs; + struct cec_connector_info conn_info; + + u32 tx_timeouts; + +#ifdef CONFIG_CEC_NOTIFIER + struct cec_notifier *notifier; +#endif +#ifdef CONFIG_CEC_PIN + struct cec_pin *pin; +#endif + + struct dentry *cec_dir; + + u32 sequence; + + char input_phys[32]; +}; + +static inline void *cec_get_drvdata(const struct cec_adapter *adap) +{ + return adap->priv; +} + +static inline bool cec_has_log_addr(const struct cec_adapter *adap, u8 log_addr) +{ + return adap->log_addrs.log_addr_mask & (1 << log_addr); +} + +static inline bool cec_is_sink(const struct cec_adapter *adap) +{ + return adap->phys_addr == 0; +} + +/** + * cec_is_registered() - is the CEC adapter registered? + * + * @adap: the CEC adapter, may be NULL. + * + * Return: true if the adapter is registered, false otherwise. + */ +static inline bool cec_is_registered(const struct cec_adapter *adap) +{ + return adap && adap->devnode.registered; +} + +#define cec_phys_addr_exp(pa) \ + ((pa) >> 12), ((pa) >> 8) & 0xf, ((pa) >> 4) & 0xf, (pa) & 0xf + +struct edid; +struct drm_connector; + +#if IS_REACHABLE(CONFIG_CEC_CORE) +struct cec_adapter *cec_allocate_adapter(const struct cec_adap_ops *ops, + void *priv, const char *name, u32 caps, u8 available_las); +int cec_register_adapter(struct cec_adapter *adap, struct device *parent); +void cec_unregister_adapter(struct cec_adapter *adap); +void cec_delete_adapter(struct cec_adapter *adap); + +int cec_s_log_addrs(struct cec_adapter *adap, struct cec_log_addrs *log_addrs, + bool block); +void cec_s_phys_addr(struct cec_adapter *adap, u16 phys_addr, + bool block); +void cec_s_phys_addr_from_edid(struct cec_adapter *adap, + const struct edid *edid); +void cec_s_conn_info(struct cec_adapter *adap, + const struct cec_connector_info *conn_info); +int cec_transmit_msg(struct cec_adapter *adap, struct cec_msg *msg, + bool block); + +/* Called by the adapter */ +void cec_transmit_done_ts(struct cec_adapter *adap, u8 status, + u8 arb_lost_cnt, u8 nack_cnt, u8 low_drive_cnt, + u8 error_cnt, ktime_t ts); + +static inline void cec_transmit_done(struct cec_adapter *adap, u8 status, + u8 arb_lost_cnt, u8 nack_cnt, + u8 low_drive_cnt, u8 error_cnt) +{ + cec_transmit_done_ts(adap, status, arb_lost_cnt, nack_cnt, + low_drive_cnt, error_cnt, ktime_get()); +} +/* + * Simplified version of cec_transmit_done for hardware that doesn't retry + * failed transmits. So this is always just one attempt in which case + * the status is sufficient. + */ +void cec_transmit_attempt_done_ts(struct cec_adapter *adap, + u8 status, ktime_t ts); + +static inline void cec_transmit_attempt_done(struct cec_adapter *adap, + u8 status) +{ + cec_transmit_attempt_done_ts(adap, status, ktime_get()); +} + +void cec_received_msg_ts(struct cec_adapter *adap, + struct cec_msg *msg, ktime_t ts); + +static inline void cec_received_msg(struct cec_adapter *adap, + struct cec_msg *msg) +{ + cec_received_msg_ts(adap, msg, ktime_get()); +} + +/** + * cec_queue_pin_cec_event() - queue a CEC pin event with a given timestamp. + * + * @adap: pointer to the cec adapter + * @is_high: when true the CEC pin is high, otherwise it is low + * @dropped_events: when true some events were dropped + * @ts: the timestamp for this event + * + */ +void cec_queue_pin_cec_event(struct cec_adapter *adap, bool is_high, + bool dropped_events, ktime_t ts); + +/** + * cec_queue_pin_hpd_event() - queue a pin event with a given timestamp. + * + * @adap: pointer to the cec adapter + * @is_high: when true the HPD pin is high, otherwise it is low + * @ts: the timestamp for this event + * + */ +void cec_queue_pin_hpd_event(struct cec_adapter *adap, bool is_high, ktime_t ts); + +/** + * cec_queue_pin_5v_event() - queue a pin event with a given timestamp. + * + * @adap: pointer to the cec adapter + * @is_high: when true the 5V pin is high, otherwise it is low + * @ts: the timestamp for this event + * + */ +void cec_queue_pin_5v_event(struct cec_adapter *adap, bool is_high, ktime_t ts); + +/** + * cec_get_edid_phys_addr() - find and return the physical address + * + * @edid: pointer to the EDID data + * @size: size in bytes of the EDID data + * @offset: If not %NULL then the location of the physical address + * bytes in the EDID will be returned here. This is set to 0 + * if there is no physical address found. + * + * Return: the physical address or CEC_PHYS_ADDR_INVALID if there is none. + */ +u16 cec_get_edid_phys_addr(const u8 *edid, unsigned int size, + unsigned int *offset); + +void cec_fill_conn_info_from_drm(struct cec_connector_info *conn_info, + const struct drm_connector *connector); + +#else + +static inline int cec_register_adapter(struct cec_adapter *adap, + struct device *parent) +{ + return 0; +} + +static inline void cec_unregister_adapter(struct cec_adapter *adap) +{ +} + +static inline void cec_delete_adapter(struct cec_adapter *adap) +{ +} + +static inline void cec_s_phys_addr(struct cec_adapter *adap, u16 phys_addr, + bool block) +{ +} + +static inline void cec_s_phys_addr_from_edid(struct cec_adapter *adap, + const struct edid *edid) +{ +} + +static inline u16 cec_get_edid_phys_addr(const u8 *edid, unsigned int size, + unsigned int *offset) +{ + if (offset) + *offset = 0; + return CEC_PHYS_ADDR_INVALID; +} + +static inline void cec_s_conn_info(struct cec_adapter *adap, + const struct cec_connector_info *conn_info) +{ +} + +static inline void +cec_fill_conn_info_from_drm(struct cec_connector_info *conn_info, + const struct drm_connector *connector) +{ + memset(conn_info, 0, sizeof(*conn_info)); +} + +#endif + +/** + * cec_phys_addr_invalidate() - set the physical address to INVALID + * + * @adap: the CEC adapter + * + * This is a simple helper function to invalidate the physical + * address. + */ +static inline void cec_phys_addr_invalidate(struct cec_adapter *adap) +{ + cec_s_phys_addr(adap, CEC_PHYS_ADDR_INVALID, false); +} + +/** + * cec_get_edid_spa_location() - find location of the Source Physical Address + * + * @edid: the EDID + * @size: the size of the EDID + * + * This EDID is expected to be a CEA-861 compliant, which means that there are + * at least two blocks and one or more of the extensions blocks are CEA-861 + * blocks. + * + * The returned location is guaranteed to be <= size-2. + * + * This is an inline function since it is used by both CEC and V4L2. + * Ideally this would go in a module shared by both, but it is overkill to do + * that for just a single function. + */ +static inline unsigned int cec_get_edid_spa_location(const u8 *edid, + unsigned int size) +{ + unsigned int blocks = size / 128; + unsigned int block; + u8 d; + + /* Sanity check: at least 2 blocks and a multiple of the block size */ + if (blocks < 2 || size % 128) + return 0; + + /* + * If there are fewer extension blocks than the size, then update + * 'blocks'. It is allowed to have more extension blocks than the size, + * since some hardware can only read e.g. 256 bytes of the EDID, even + * though more blocks are present. The first CEA-861 extension block + * should normally be in block 1 anyway. + */ + if (edid[0x7e] + 1 < blocks) + blocks = edid[0x7e] + 1; + + for (block = 1; block < blocks; block++) { + unsigned int offset = block * 128; + + /* Skip any non-CEA-861 extension blocks */ + if (edid[offset] != 0x02 || edid[offset + 1] != 0x03) + continue; + + /* search Vendor Specific Data Block (tag 3) */ + d = edid[offset + 2] & 0x7f; + /* Check if there are Data Blocks */ + if (d <= 4) + continue; + if (d > 4) { + unsigned int i = offset + 4; + unsigned int end = offset + d; + + /* Note: 'end' is always < 'size' */ + do { + u8 tag = edid[i] >> 5; + u8 len = edid[i] & 0x1f; + + if (tag == 3 && len >= 5 && i + len <= end && + edid[i + 1] == 0x03 && + edid[i + 2] == 0x0c && + edid[i + 3] == 0x00) + return i + 4; + i += len + 1; + } while (i < end); + } + } + return 0; +} + +#endif /* _MEDIA_CEC_H */ diff --git a/include/media/davinci/ccdc_types.h b/include/media/davinci/ccdc_types.h new file mode 100644 index 000000000..971984dc1 --- /dev/null +++ b/include/media/davinci/ccdc_types.h @@ -0,0 +1,30 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * Copyright (C) 2008-2009 Texas Instruments Inc + * + **************************************************************************/ +#ifndef _CCDC_TYPES_H +#define _CCDC_TYPES_H +enum ccdc_pixfmt { + CCDC_PIXFMT_RAW, + CCDC_PIXFMT_YCBCR_16BIT, + CCDC_PIXFMT_YCBCR_8BIT +}; + +enum ccdc_frmfmt { + CCDC_FRMFMT_PROGRESSIVE, + CCDC_FRMFMT_INTERLACED +}; + +/* PIXEL ORDER IN MEMORY from LSB to MSB */ +/* only applicable for 8-bit input mode */ +enum ccdc_pixorder { + CCDC_PIXORDER_YCBYCR, + CCDC_PIXORDER_CBYCRY, +}; + +enum ccdc_buftype { + CCDC_BUFTYPE_FLD_INTERLEAVED, + CCDC_BUFTYPE_FLD_SEPARATED +}; +#endif diff --git a/include/media/davinci/dm355_ccdc.h b/include/media/davinci/dm355_ccdc.h new file mode 100644 index 000000000..1f3d00aa4 --- /dev/null +++ b/include/media/davinci/dm355_ccdc.h @@ -0,0 +1,308 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * Copyright (C) 2005-2009 Texas Instruments Inc + */ +#ifndef _DM355_CCDC_H +#define _DM355_CCDC_H +#include <media/davinci/ccdc_types.h> +#include <media/davinci/vpfe_types.h> + +/* enum for No of pixel per line to be avg. in Black Clamping */ +enum ccdc_sample_length { + CCDC_SAMPLE_1PIXELS, + CCDC_SAMPLE_2PIXELS, + CCDC_SAMPLE_4PIXELS, + CCDC_SAMPLE_8PIXELS, + CCDC_SAMPLE_16PIXELS +}; + +/* enum for No of lines in Black Clamping */ +enum ccdc_sample_line { + CCDC_SAMPLE_1LINES, + CCDC_SAMPLE_2LINES, + CCDC_SAMPLE_4LINES, + CCDC_SAMPLE_8LINES, + CCDC_SAMPLE_16LINES +}; + +/* enum for Alaw gamma width */ +enum ccdc_gamma_width { + CCDC_GAMMA_BITS_13_4, + CCDC_GAMMA_BITS_12_3, + CCDC_GAMMA_BITS_11_2, + CCDC_GAMMA_BITS_10_1, + CCDC_GAMMA_BITS_09_0 +}; + +enum ccdc_colpats { + CCDC_RED, + CCDC_GREEN_RED, + CCDC_GREEN_BLUE, + CCDC_BLUE +}; + +struct ccdc_col_pat { + enum ccdc_colpats olop; + enum ccdc_colpats olep; + enum ccdc_colpats elop; + enum ccdc_colpats elep; +}; + +enum ccdc_datasft { + CCDC_DATA_NO_SHIFT, + CCDC_DATA_SHIFT_1BIT, + CCDC_DATA_SHIFT_2BIT, + CCDC_DATA_SHIFT_3BIT, + CCDC_DATA_SHIFT_4BIT, + CCDC_DATA_SHIFT_5BIT, + CCDC_DATA_SHIFT_6BIT +}; + +enum ccdc_data_size { + CCDC_DATA_16BITS, + CCDC_DATA_15BITS, + CCDC_DATA_14BITS, + CCDC_DATA_13BITS, + CCDC_DATA_12BITS, + CCDC_DATA_11BITS, + CCDC_DATA_10BITS, + CCDC_DATA_8BITS +}; +enum ccdc_mfilt1 { + CCDC_NO_MEDIAN_FILTER1, + CCDC_AVERAGE_FILTER1, + CCDC_MEDIAN_FILTER1 +}; + +enum ccdc_mfilt2 { + CCDC_NO_MEDIAN_FILTER2, + CCDC_AVERAGE_FILTER2, + CCDC_MEDIAN_FILTER2 +}; + +/* structure for ALaw */ +struct ccdc_a_law { + /* Enable/disable A-Law */ + unsigned char enable; + /* Gamma Width Input */ + enum ccdc_gamma_width gamma_wd; +}; + +/* structure for Black Clamping */ +struct ccdc_black_clamp { + /* only if bClampEnable is TRUE */ + unsigned char b_clamp_enable; + /* only if bClampEnable is TRUE */ + enum ccdc_sample_length sample_pixel; + /* only if bClampEnable is TRUE */ + enum ccdc_sample_line sample_ln; + /* only if bClampEnable is TRUE */ + unsigned short start_pixel; + /* only if bClampEnable is FALSE */ + unsigned short sgain; + unsigned short dc_sub; +}; + +/* structure for Black Level Compensation */ +struct ccdc_black_compensation { + /* Constant value to subtract from Red component */ + unsigned char r; + /* Constant value to subtract from Gr component */ + unsigned char gr; + /* Constant value to subtract from Blue component */ + unsigned char b; + /* Constant value to subtract from Gb component */ + unsigned char gb; +}; + +struct ccdc_float { + int integer; + unsigned int decimal; +}; + +#define CCDC_CSC_COEFF_TABLE_SIZE 16 +/* structure for color space converter */ +struct ccdc_csc { + unsigned char enable; + /* + * S8Q5. Use 2 decimal precision, user values range from -3.00 to 3.99. + * example - to use 1.03, set integer part as 1, and decimal part as 3 + * to use -1.03, set integer part as -1 and decimal part as 3 + */ + struct ccdc_float coeff[CCDC_CSC_COEFF_TABLE_SIZE]; +}; + +/* Structures for Vertical Defect Correction*/ +enum ccdc_vdf_csl { + CCDC_VDF_NORMAL, + CCDC_VDF_HORZ_INTERPOL_SAT, + CCDC_VDF_HORZ_INTERPOL +}; + +enum ccdc_vdf_cuda { + CCDC_VDF_WHOLE_LINE_CORRECT, + CCDC_VDF_UPPER_DISABLE +}; + +enum ccdc_dfc_mwr { + CCDC_DFC_MWR_WRITE_COMPLETE, + CCDC_DFC_WRITE_REG +}; + +enum ccdc_dfc_mrd { + CCDC_DFC_READ_COMPLETE, + CCDC_DFC_READ_REG +}; + +enum ccdc_dfc_ma_rst { + CCDC_DFC_INCR_ADDR, + CCDC_DFC_CLR_ADDR +}; + +enum ccdc_dfc_mclr { + CCDC_DFC_CLEAR_COMPLETE, + CCDC_DFC_CLEAR +}; + +struct ccdc_dft_corr_ctl { + enum ccdc_vdf_csl vdfcsl; + enum ccdc_vdf_cuda vdfcuda; + unsigned int vdflsft; +}; + +struct ccdc_dft_corr_mem_ctl { + enum ccdc_dfc_mwr dfcmwr; + enum ccdc_dfc_mrd dfcmrd; + enum ccdc_dfc_ma_rst dfcmarst; + enum ccdc_dfc_mclr dfcmclr; +}; + +#define CCDC_DFT_TABLE_SIZE 16 +/* + * Main Structure for vertical defect correction. Vertical defect + * correction can correct up to 16 defects if defects less than 16 + * then pad the rest with 0 + */ +struct ccdc_vertical_dft { + unsigned char ver_dft_en; + unsigned char gen_dft_en; + unsigned int saturation_ctl; + struct ccdc_dft_corr_ctl dft_corr_ctl; + struct ccdc_dft_corr_mem_ctl dft_corr_mem_ctl; + int table_size; + unsigned int dft_corr_horz[CCDC_DFT_TABLE_SIZE]; + unsigned int dft_corr_vert[CCDC_DFT_TABLE_SIZE]; + unsigned int dft_corr_sub1[CCDC_DFT_TABLE_SIZE]; + unsigned int dft_corr_sub2[CCDC_DFT_TABLE_SIZE]; + unsigned int dft_corr_sub3[CCDC_DFT_TABLE_SIZE]; +}; + +struct ccdc_data_offset { + unsigned char horz_offset; + unsigned char vert_offset; +}; + +/* + * Structure for CCDC configuration parameters for raw capture mode passed + * by application + */ +struct ccdc_config_params_raw { + /* data shift to be applied before storing */ + enum ccdc_datasft datasft; + /* data size value from 8 to 16 bits */ + enum ccdc_data_size data_sz; + /* median filter for sdram */ + enum ccdc_mfilt1 mfilt1; + enum ccdc_mfilt2 mfilt2; + /* low pass filter enable/disable */ + unsigned char lpf_enable; + /* Threshold of median filter */ + int med_filt_thres; + /* + * horz and vertical data offset. Applicable for defect correction + * and lsc + */ + struct ccdc_data_offset data_offset; + /* Structure for Optional A-Law */ + struct ccdc_a_law alaw; + /* Structure for Optical Black Clamp */ + struct ccdc_black_clamp blk_clamp; + /* Structure for Black Compensation */ + struct ccdc_black_compensation blk_comp; + /* structure for vertical Defect Correction Module Configuration */ + struct ccdc_vertical_dft vertical_dft; + /* structure for color space converter Module Configuration */ + struct ccdc_csc csc; + /* color patters for bayer capture */ + struct ccdc_col_pat col_pat_field0; + struct ccdc_col_pat col_pat_field1; +}; + +#ifdef __KERNEL__ +#include <linux/io.h> + +#define CCDC_WIN_PAL {0, 0, 720, 576} +#define CCDC_WIN_VGA {0, 0, 640, 480} + +struct ccdc_params_ycbcr { + /* pixel format */ + enum ccdc_pixfmt pix_fmt; + /* progressive or interlaced frame */ + enum ccdc_frmfmt frm_fmt; + /* video window */ + struct v4l2_rect win; + /* field id polarity */ + enum vpfe_pin_pol fid_pol; + /* vertical sync polarity */ + enum vpfe_pin_pol vd_pol; + /* horizontal sync polarity */ + enum vpfe_pin_pol hd_pol; + /* enable BT.656 embedded sync mode */ + int bt656_enable; + /* cb:y:cr:y or y:cb:y:cr in memory */ + enum ccdc_pixorder pix_order; + /* interleaved or separated fields */ + enum ccdc_buftype buf_type; +}; + +/* Gain applied to Raw Bayer data */ +struct ccdc_gain { + unsigned short r_ye; + unsigned short gr_cy; + unsigned short gb_g; + unsigned short b_mg; +}; + +/* Structure for CCDC configuration parameters for raw capture mode */ +struct ccdc_params_raw { + /* pixel format */ + enum ccdc_pixfmt pix_fmt; + /* progressive or interlaced frame */ + enum ccdc_frmfmt frm_fmt; + /* video window */ + struct v4l2_rect win; + /* field id polarity */ + enum vpfe_pin_pol fid_pol; + /* vertical sync polarity */ + enum vpfe_pin_pol vd_pol; + /* horizontal sync polarity */ + enum vpfe_pin_pol hd_pol; + /* interleaved or separated fields */ + enum ccdc_buftype buf_type; + /* Gain values */ + struct ccdc_gain gain; + /* offset */ + unsigned int ccdc_offset; + /* horizontal flip enable */ + unsigned char horz_flip_enable; + /* + * enable to store the image in inverse order in memory + * (bottom to top) + */ + unsigned char image_invert_enable; + /* Configurable part of raw data */ + struct ccdc_config_params_raw config_params; +}; + +#endif +#endif /* DM355_CCDC_H */ diff --git a/include/media/davinci/dm644x_ccdc.h b/include/media/davinci/dm644x_ccdc.h new file mode 100644 index 000000000..c20dba3d7 --- /dev/null +++ b/include/media/davinci/dm644x_ccdc.h @@ -0,0 +1,171 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * Copyright (C) 2006-2009 Texas Instruments Inc + */ +#ifndef _DM644X_CCDC_H +#define _DM644X_CCDC_H +#include <media/davinci/ccdc_types.h> +#include <media/davinci/vpfe_types.h> + +/* enum for No of pixel per line to be avg. in Black Clamping*/ +enum ccdc_sample_length { + CCDC_SAMPLE_1PIXELS, + CCDC_SAMPLE_2PIXELS, + CCDC_SAMPLE_4PIXELS, + CCDC_SAMPLE_8PIXELS, + CCDC_SAMPLE_16PIXELS +}; + +/* enum for No of lines in Black Clamping */ +enum ccdc_sample_line { + CCDC_SAMPLE_1LINES, + CCDC_SAMPLE_2LINES, + CCDC_SAMPLE_4LINES, + CCDC_SAMPLE_8LINES, + CCDC_SAMPLE_16LINES +}; + +/* enum for Alaw gamma width */ +enum ccdc_gamma_width { + CCDC_GAMMA_BITS_15_6, /* use bits 15-6 for gamma */ + CCDC_GAMMA_BITS_14_5, + CCDC_GAMMA_BITS_13_4, + CCDC_GAMMA_BITS_12_3, + CCDC_GAMMA_BITS_11_2, + CCDC_GAMMA_BITS_10_1, + CCDC_GAMMA_BITS_09_0 /* use bits 9-0 for gamma */ +}; + +/* returns the highest bit used for the gamma */ +static inline u8 ccdc_gamma_width_max_bit(enum ccdc_gamma_width width) +{ + return 15 - width; +} + +enum ccdc_data_size { + CCDC_DATA_16BITS, + CCDC_DATA_15BITS, + CCDC_DATA_14BITS, + CCDC_DATA_13BITS, + CCDC_DATA_12BITS, + CCDC_DATA_11BITS, + CCDC_DATA_10BITS, + CCDC_DATA_8BITS +}; + +/* returns the highest bit used for this data size */ +static inline u8 ccdc_data_size_max_bit(enum ccdc_data_size sz) +{ + return sz == CCDC_DATA_8BITS ? 7 : 15 - sz; +} + +/* structure for ALaw */ +struct ccdc_a_law { + /* Enable/disable A-Law */ + unsigned char enable; + /* Gamma Width Input */ + enum ccdc_gamma_width gamma_wd; +}; + +/* structure for Black Clamping */ +struct ccdc_black_clamp { + unsigned char enable; + /* only if bClampEnable is TRUE */ + enum ccdc_sample_length sample_pixel; + /* only if bClampEnable is TRUE */ + enum ccdc_sample_line sample_ln; + /* only if bClampEnable is TRUE */ + unsigned short start_pixel; + /* only if bClampEnable is TRUE */ + unsigned short sgain; + /* only if bClampEnable is FALSE */ + unsigned short dc_sub; +}; + +/* structure for Black Level Compensation */ +struct ccdc_black_compensation { + /* Constant value to subtract from Red component */ + char r; + /* Constant value to subtract from Gr component */ + char gr; + /* Constant value to subtract from Blue component */ + char b; + /* Constant value to subtract from Gb component */ + char gb; +}; + +/* Structure for CCDC configuration parameters for raw capture mode passed + * by application + */ +struct ccdc_config_params_raw { + /* data size value from 8 to 16 bits */ + enum ccdc_data_size data_sz; + /* Structure for Optional A-Law */ + struct ccdc_a_law alaw; + /* Structure for Optical Black Clamp */ + struct ccdc_black_clamp blk_clamp; + /* Structure for Black Compensation */ + struct ccdc_black_compensation blk_comp; +}; + + +#ifdef __KERNEL__ +#include <linux/io.h> +/* Define to enable/disable video port */ +#define FP_NUM_BYTES 4 +/* Define for extra pixel/line and extra lines/frame */ +#define NUM_EXTRAPIXELS 8 +#define NUM_EXTRALINES 8 + +/* settings for commonly used video formats */ +#define CCDC_WIN_PAL {0, 0, 720, 576} +/* ntsc square pixel */ +#define CCDC_WIN_VGA {0, 0, (640 + NUM_EXTRAPIXELS), (480 + NUM_EXTRALINES)} + +/* Structure for CCDC configuration parameters for raw capture mode */ +struct ccdc_params_raw { + /* pixel format */ + enum ccdc_pixfmt pix_fmt; + /* progressive or interlaced frame */ + enum ccdc_frmfmt frm_fmt; + /* video window */ + struct v4l2_rect win; + /* field id polarity */ + enum vpfe_pin_pol fid_pol; + /* vertical sync polarity */ + enum vpfe_pin_pol vd_pol; + /* horizontal sync polarity */ + enum vpfe_pin_pol hd_pol; + /* interleaved or separated fields */ + enum ccdc_buftype buf_type; + /* + * enable to store the image in inverse + * order in memory(bottom to top) + */ + unsigned char image_invert_enable; + /* configurable parameters */ + struct ccdc_config_params_raw config_params; +}; + +struct ccdc_params_ycbcr { + /* pixel format */ + enum ccdc_pixfmt pix_fmt; + /* progressive or interlaced frame */ + enum ccdc_frmfmt frm_fmt; + /* video window */ + struct v4l2_rect win; + /* field id polarity */ + enum vpfe_pin_pol fid_pol; + /* vertical sync polarity */ + enum vpfe_pin_pol vd_pol; + /* horizontal sync polarity */ + enum vpfe_pin_pol hd_pol; + /* enable BT.656 embedded sync mode */ + int bt656_enable; + /* cb:y:cr:y or y:cb:y:cr in memory */ + enum ccdc_pixorder pix_order; + /* interleaved or separated fields */ + enum ccdc_buftype buf_type; +}; +#endif +#endif /* _DM644X_CCDC_H */ diff --git a/include/media/davinci/isif.h b/include/media/davinci/isif.h new file mode 100644 index 000000000..e66589c40 --- /dev/null +++ b/include/media/davinci/isif.h @@ -0,0 +1,518 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * Copyright (C) 2008-2009 Texas Instruments Inc + * + * isif header file + */ +#ifndef _ISIF_H +#define _ISIF_H + +#include <media/davinci/ccdc_types.h> +#include <media/davinci/vpfe_types.h> + +/* isif float type S8Q8/U8Q8 */ +struct isif_float_8 { + /* 8 bit integer part */ + __u8 integer; + /* 8 bit decimal part */ + __u8 decimal; +}; + +/* isif float type U16Q16/S16Q16 */ +struct isif_float_16 { + /* 16 bit integer part */ + __u16 integer; + /* 16 bit decimal part */ + __u16 decimal; +}; + +/************************************************************************ + * Vertical Defect Correction parameters + ***********************************************************************/ +/* Defect Correction (DFC) table entry */ +struct isif_vdfc_entry { + /* vertical position of defect */ + __u16 pos_vert; + /* horizontal position of defect */ + __u16 pos_horz; + /* + * Defect level of Vertical line defect position. This is subtracted + * from the data at the defect position + */ + __u8 level_at_pos; + /* + * Defect level of the pixels upper than the vertical line defect. + * This is subtracted from the data + */ + __u8 level_up_pixels; + /* + * Defect level of the pixels lower than the vertical line defect. + * This is subtracted from the data + */ + __u8 level_low_pixels; +}; + +#define ISIF_VDFC_TABLE_SIZE 8 +struct isif_dfc { + /* enable vertical defect correction */ + __u8 en; + /* Defect level subtraction. Just fed through if saturating */ +#define ISIF_VDFC_NORMAL 0 + /* + * Defect level subtraction. Horizontal interpolation ((i-2)+(i+2))/2 + * if data saturating + */ +#define ISIF_VDFC_HORZ_INTERPOL_IF_SAT 1 + /* Horizontal interpolation (((i-2)+(i+2))/2) */ +#define ISIF_VDFC_HORZ_INTERPOL 2 + /* one of the vertical defect correction modes above */ + __u8 corr_mode; + /* 0 - whole line corrected, 1 - not pixels upper than the defect */ + __u8 corr_whole_line; +#define ISIF_VDFC_NO_SHIFT 0 +#define ISIF_VDFC_SHIFT_1 1 +#define ISIF_VDFC_SHIFT_2 2 +#define ISIF_VDFC_SHIFT_3 3 +#define ISIF_VDFC_SHIFT_4 4 + /* + * defect level shift value. level_at_pos, level_upper_pos, + * and level_lower_pos can be shifted up by this value. Choose + * one of the values above + */ + __u8 def_level_shift; + /* defect saturation level */ + __u16 def_sat_level; + /* number of vertical defects. Max is ISIF_VDFC_TABLE_SIZE */ + __u16 num_vdefects; + /* VDFC table ptr */ + struct isif_vdfc_entry table[ISIF_VDFC_TABLE_SIZE]; +}; + +struct isif_horz_bclamp { + + /* Horizontal clamp disabled. Only vertical clamp value is subtracted */ +#define ISIF_HORZ_BC_DISABLE 0 + /* + * Horizontal clamp value is calculated and subtracted from image data + * along with vertical clamp value + */ +#define ISIF_HORZ_BC_CLAMP_CALC_ENABLED 1 + /* + * Horizontal clamp value calculated from previous image is subtracted + * from image data along with vertical clamp value. + */ +#define ISIF_HORZ_BC_CLAMP_NOT_UPDATED 2 + /* horizontal clamp mode. One of the values above */ + __u8 mode; + /* + * pixel value limit enable. + * 0 - limit disabled + * 1 - pixel value limited to 1023 + */ + __u8 clamp_pix_limit; + /* Select Most left window for bc calculation */ +#define ISIF_SEL_MOST_LEFT_WIN 0 + /* Select Most right window for bc calculation */ +#define ISIF_SEL_MOST_RIGHT_WIN 1 + /* Select most left or right window for clamp val calculation */ + __u8 base_win_sel_calc; + /* Window count per color for calculation. range 1-32 */ + __u8 win_count_calc; + /* Window start position - horizontal for calculation. 0 - 8191 */ + __u16 win_start_h_calc; + /* Window start position - vertical for calculation 0 - 8191 */ + __u16 win_start_v_calc; +#define ISIF_HORZ_BC_SZ_H_2PIXELS 0 +#define ISIF_HORZ_BC_SZ_H_4PIXELS 1 +#define ISIF_HORZ_BC_SZ_H_8PIXELS 2 +#define ISIF_HORZ_BC_SZ_H_16PIXELS 3 + /* Width of the sample window in pixels for calculation */ + __u8 win_h_sz_calc; +#define ISIF_HORZ_BC_SZ_V_32PIXELS 0 +#define ISIF_HORZ_BC_SZ_V_64PIXELS 1 +#define ISIF_HORZ_BC_SZ_V_128PIXELS 2 +#define ISIF_HORZ_BC_SZ_V_256PIXELS 3 + /* Height of the sample window in pixels for calculation */ + __u8 win_v_sz_calc; +}; + +/************************************************************************ + * Black Clamp parameters + ***********************************************************************/ +struct isif_vert_bclamp { + /* Reset value used is the clamp value calculated */ +#define ISIF_VERT_BC_USE_HORZ_CLAMP_VAL 0 + /* Reset value used is reset_clamp_val configured */ +#define ISIF_VERT_BC_USE_CONFIG_CLAMP_VAL 1 + /* No update, previous image value is used */ +#define ISIF_VERT_BC_NO_UPDATE 2 + /* + * Reset value selector for vertical clamp calculation. Use one of + * the above values + */ + __u8 reset_val_sel; + /* U8Q8. Line average coefficient used in vertical clamp calculation */ + __u8 line_ave_coef; + /* Height of the optical black region for calculation */ + __u16 ob_v_sz_calc; + /* Optical black region start position - horizontal. 0 - 8191 */ + __u16 ob_start_h; + /* Optical black region start position - vertical 0 - 8191 */ + __u16 ob_start_v; +}; + +struct isif_black_clamp { + /* + * This offset value is added irrespective of the clamp enable status. + * S13 + */ + __u16 dc_offset; + /* + * Enable black/digital clamp value to be subtracted from the image data + */ + __u8 en; + /* + * black clamp mode. same/separate clamp for 4 colors + * 0 - disable - same clamp value for all colors + * 1 - clamp value calculated separately for all colors + */ + __u8 bc_mode_color; + /* Vrtical start position for bc subtraction */ + __u16 vert_start_sub; + /* Black clamp for horizontal direction */ + struct isif_horz_bclamp horz; + /* Black clamp for vertical direction */ + struct isif_vert_bclamp vert; +}; + +/************************************************************************* +** Color Space Conversion (CSC) +*************************************************************************/ +#define ISIF_CSC_NUM_COEFF 16 +struct isif_color_space_conv { + /* Enable color space conversion */ + __u8 en; + /* + * csc coeffient table. S8Q5, M00 at index 0, M01 at index 1, and + * so forth + */ + struct isif_float_8 coeff[ISIF_CSC_NUM_COEFF]; +}; + + +/************************************************************************* +** Black Compensation parameters +*************************************************************************/ +struct isif_black_comp { + /* Comp for Red */ + __s8 r_comp; + /* Comp for Gr */ + __s8 gr_comp; + /* Comp for Blue */ + __s8 b_comp; + /* Comp for Gb */ + __s8 gb_comp; +}; + +/************************************************************************* +** Gain parameters +*************************************************************************/ +struct isif_gain { + /* Gain for Red or ye */ + struct isif_float_16 r_ye; + /* Gain for Gr or cy */ + struct isif_float_16 gr_cy; + /* Gain for Gb or g */ + struct isif_float_16 gb_g; + /* Gain for Blue or mg */ + struct isif_float_16 b_mg; +}; + +#define ISIF_LINEAR_TAB_SIZE 192 +/************************************************************************* +** Linearization parameters +*************************************************************************/ +struct isif_linearize { + /* Enable or Disable linearization of data */ + __u8 en; + /* Shift value applied */ + __u8 corr_shft; + /* scale factor applied U11Q10 */ + struct isif_float_16 scale_fact; + /* Size of the linear table */ + __u16 table[ISIF_LINEAR_TAB_SIZE]; +}; + +/* Color patterns */ +#define ISIF_RED 0 +#define ISIF_GREEN_RED 1 +#define ISIF_GREEN_BLUE 2 +#define ISIF_BLUE 3 +struct isif_col_pat { + __u8 olop; + __u8 olep; + __u8 elop; + __u8 elep; +}; + +/************************************************************************* +** Data formatter parameters +*************************************************************************/ +struct isif_fmtplen { + /* + * number of program entries for SET0, range 1 - 16 + * when fmtmode is ISIF_SPLIT, 1 - 8 when fmtmode is + * ISIF_COMBINE + */ + __u16 plen0; + /* + * number of program entries for SET1, range 1 - 16 + * when fmtmode is ISIF_SPLIT, 1 - 8 when fmtmode is + * ISIF_COMBINE + */ + __u16 plen1; + /** + * number of program entries for SET2, range 1 - 16 + * when fmtmode is ISIF_SPLIT, 1 - 8 when fmtmode is + * ISIF_COMBINE + */ + __u16 plen2; + /** + * number of program entries for SET3, range 1 - 16 + * when fmtmode is ISIF_SPLIT, 1 - 8 when fmtmode is + * ISIF_COMBINE + */ + __u16 plen3; +}; + +struct isif_fmt_cfg { +#define ISIF_SPLIT 0 +#define ISIF_COMBINE 1 + /* Split or combine or line alternate */ + __u8 fmtmode; + /* enable or disable line alternating mode */ + __u8 ln_alter_en; +#define ISIF_1LINE 0 +#define ISIF_2LINES 1 +#define ISIF_3LINES 2 +#define ISIF_4LINES 3 + /* Split/combine line number */ + __u8 lnum; + /* Address increment Range 1 - 16 */ + __u8 addrinc; +}; + +struct isif_fmt_addr_ptr { + /* Initial address */ + __u32 init_addr; + /* output line number */ +#define ISIF_1STLINE 0 +#define ISIF_2NDLINE 1 +#define ISIF_3RDLINE 2 +#define ISIF_4THLINE 3 + __u8 out_line; +}; + +struct isif_fmtpgm_ap { + /* program address pointer */ + __u8 pgm_aptr; + /* program address increment or decrement */ + __u8 pgmupdt; +}; + +struct isif_data_formatter { + /* Enable/Disable data formatter */ + __u8 en; + /* data formatter configuration */ + struct isif_fmt_cfg cfg; + /* Formatter program entries length */ + struct isif_fmtplen plen; + /* first pixel in a line fed to formatter */ + __u16 fmtrlen; + /* HD interval for output line. Only valid when split line */ + __u16 fmthcnt; + /* formatter address pointers */ + struct isif_fmt_addr_ptr fmtaddr_ptr[16]; + /* program enable/disable */ + __u8 pgm_en[32]; + /* program address pointers */ + struct isif_fmtpgm_ap fmtpgm_ap[32]; +}; + +struct isif_df_csc { + /* Color Space Conversion confguration, 0 - csc, 1 - df */ + __u8 df_or_csc; + /* csc configuration valid if df_or_csc is 0 */ + struct isif_color_space_conv csc; + /* data formatter configuration valid if df_or_csc is 1 */ + struct isif_data_formatter df; + /* start pixel in a line at the input */ + __u32 start_pix; + /* number of pixels in input line */ + __u32 num_pixels; + /* start line at the input */ + __u32 start_line; + /* number of lines at the input */ + __u32 num_lines; +}; + +struct isif_gain_offsets_adj { + /* Gain adjustment per color */ + struct isif_gain gain; + /* Offset adjustment */ + __u16 offset; + /* Enable or Disable Gain adjustment for SDRAM data */ + __u8 gain_sdram_en; + /* Enable or Disable Gain adjustment for IPIPE data */ + __u8 gain_ipipe_en; + /* Enable or Disable Gain adjustment for H3A data */ + __u8 gain_h3a_en; + /* Enable or Disable Gain adjustment for SDRAM data */ + __u8 offset_sdram_en; + /* Enable or Disable Gain adjustment for IPIPE data */ + __u8 offset_ipipe_en; + /* Enable or Disable Gain adjustment for H3A data */ + __u8 offset_h3a_en; +}; + +struct isif_cul { + /* Horizontal Cull pattern for odd lines */ + __u8 hcpat_odd; + /* Horizontal Cull pattern for even lines */ + __u8 hcpat_even; + /* Vertical Cull pattern */ + __u8 vcpat; + /* Enable or disable lpf. Apply when cull is enabled */ + __u8 en_lpf; +}; + +struct isif_compress { +#define ISIF_ALAW 0 +#define ISIF_DPCM 1 +#define ISIF_NO_COMPRESSION 2 + /* Compression Algorithm used */ + __u8 alg; + /* Choose Predictor1 for DPCM compression */ +#define ISIF_DPCM_PRED1 0 + /* Choose Predictor2 for DPCM compression */ +#define ISIF_DPCM_PRED2 1 + /* Predictor for DPCM compression */ + __u8 pred; +}; + +/* all the stuff in this struct will be provided by userland */ +struct isif_config_params_raw { + /* Linearization parameters for image sensor data input */ + struct isif_linearize linearize; + /* Data formatter or CSC */ + struct isif_df_csc df_csc; + /* Defect Pixel Correction (DFC) confguration */ + struct isif_dfc dfc; + /* Black/Digital Clamp configuration */ + struct isif_black_clamp bclamp; + /* Gain, offset adjustments */ + struct isif_gain_offsets_adj gain_offset; + /* Culling */ + struct isif_cul culling; + /* A-Law and DPCM compression options */ + struct isif_compress compress; + /* horizontal offset for Gain/LSC/DFC */ + __u16 horz_offset; + /* vertical offset for Gain/LSC/DFC */ + __u16 vert_offset; + /* color pattern for field 0 */ + struct isif_col_pat col_pat_field0; + /* color pattern for field 1 */ + struct isif_col_pat col_pat_field1; +#define ISIF_NO_SHIFT 0 +#define ISIF_1BIT_SHIFT 1 +#define ISIF_2BIT_SHIFT 2 +#define ISIF_3BIT_SHIFT 3 +#define ISIF_4BIT_SHIFT 4 +#define ISIF_5BIT_SHIFT 5 +#define ISIF_6BIT_SHIFT 6 + /* Data shift applied before storing to SDRAM */ + __u8 data_shift; + /* enable input test pattern generation */ + __u8 test_pat_gen; +}; + +#ifdef __KERNEL__ +struct isif_ycbcr_config { + /* isif pixel format */ + enum ccdc_pixfmt pix_fmt; + /* isif frame format */ + enum ccdc_frmfmt frm_fmt; + /* ISIF crop window */ + struct v4l2_rect win; + /* field polarity */ + enum vpfe_pin_pol fid_pol; + /* interface VD polarity */ + enum vpfe_pin_pol vd_pol; + /* interface HD polarity */ + enum vpfe_pin_pol hd_pol; + /* isif pix order. Only used for ycbcr capture */ + enum ccdc_pixorder pix_order; + /* isif buffer type. Only used for ycbcr capture */ + enum ccdc_buftype buf_type; +}; + +/* MSB of image data connected to sensor port */ +enum isif_data_msb { + ISIF_BIT_MSB_15, + ISIF_BIT_MSB_14, + ISIF_BIT_MSB_13, + ISIF_BIT_MSB_12, + ISIF_BIT_MSB_11, + ISIF_BIT_MSB_10, + ISIF_BIT_MSB_9, + ISIF_BIT_MSB_8, + ISIF_BIT_MSB_7 +}; + +enum isif_cfa_pattern { + ISIF_CFA_PAT_MOSAIC, + ISIF_CFA_PAT_STRIPE +}; + +struct isif_params_raw { + /* isif pixel format */ + enum ccdc_pixfmt pix_fmt; + /* isif frame format */ + enum ccdc_frmfmt frm_fmt; + /* video window */ + struct v4l2_rect win; + /* field polarity */ + enum vpfe_pin_pol fid_pol; + /* interface VD polarity */ + enum vpfe_pin_pol vd_pol; + /* interface HD polarity */ + enum vpfe_pin_pol hd_pol; + /* buffer type. Applicable for interlaced mode */ + enum ccdc_buftype buf_type; + /* Gain values */ + struct isif_gain gain; + /* cfa pattern */ + enum isif_cfa_pattern cfa_pat; + /* Data MSB position */ + enum isif_data_msb data_msb; + /* Enable horizontal flip */ + unsigned char horz_flip_en; + /* Enable image invert vertically */ + unsigned char image_invert_en; + + /* all the userland defined stuff*/ + struct isif_config_params_raw config_params; +}; + +enum isif_data_pack { + ISIF_PACK_16BIT, + ISIF_PACK_12BIT, + ISIF_PACK_8BIT +}; + +#define ISIF_WIN_NTSC {0, 0, 720, 480} +#define ISIF_WIN_VGA {0, 0, 640, 480} + +#endif +#endif diff --git a/include/media/davinci/vpbe.h b/include/media/davinci/vpbe.h new file mode 100644 index 000000000..e74a93475 --- /dev/null +++ b/include/media/davinci/vpbe.h @@ -0,0 +1,184 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright (C) 2010 Texas Instruments Inc + */ +#ifndef _VPBE_H +#define _VPBE_H + +#include <linux/videodev2.h> +#include <linux/i2c.h> + +#include <media/v4l2-dev.h> +#include <media/v4l2-ioctl.h> +#include <media/v4l2-device.h> +#include <media/davinci/vpbe_osd.h> +#include <media/davinci/vpbe_venc.h> +#include <media/davinci/vpbe_types.h> + +/* OSD configuration info */ +struct osd_config_info { + char module_name[32]; +}; + +struct vpbe_output { + struct v4l2_output output; + /* + * If output capabilities include dv_timings, list supported timings + * below + */ + char *subdev_name; + /* + * defualt_mode identifies the default timings set at the venc or + * external encoder. + */ + char *default_mode; + /* + * Fields below are used for supporting multiple modes. For example, + * LCD panel might support different modes and they are listed here. + * Similarly for supporting external encoders, lcd controller port + * requires a set of non-standard timing values to be listed here for + * each supported mode since venc is used in non-standard timing mode + * for interfacing with external encoder similar to configuring lcd + * panel timings + */ + unsigned int num_modes; + struct vpbe_enc_mode_info *modes; + /* + * Bus configuration goes here for external encoders. Some encoders + * may require multiple interface types for each of the output. For + * example, SD modes would use YCC8 where as HD mode would use YCC16. + * Not sure if this is needed on a per mode basis instead of per + * output basis. If per mode is needed, we may have to move this to + * mode_info structure + */ + u32 if_params; +}; + +/* encoder configuration info */ +struct encoder_config_info { + char module_name[32]; + /* Is this an i2c device ? */ + unsigned int is_i2c:1; + /* i2c subdevice board info */ + struct i2c_board_info board_info; +}; + +/*amplifier configuration info */ +struct amp_config_info { + char module_name[32]; + /* Is this an i2c device ? */ + unsigned int is_i2c:1; + /* i2c subdevice board info */ + struct i2c_board_info board_info; +}; + +/* structure for defining vpbe display subsystem components */ +struct vpbe_config { + char module_name[32]; + /* i2c bus adapter no */ + int i2c_adapter_id; + struct osd_config_info osd; + struct encoder_config_info venc; + /* external encoder information goes here */ + int num_ext_encoders; + struct encoder_config_info *ext_encoders; + /* amplifier information goes here */ + struct amp_config_info *amp; + unsigned int num_outputs; + /* Order is venc outputs followed by LCD and then external encoders */ + struct vpbe_output *outputs; +}; + +struct vpbe_device; + +struct vpbe_device_ops { + /* Enumerate the outputs */ + int (*enum_outputs)(struct vpbe_device *vpbe_dev, + struct v4l2_output *output); + + /* Set output to the given index */ + int (*set_output)(struct vpbe_device *vpbe_dev, + int index); + + /* Get current output */ + unsigned int (*get_output)(struct vpbe_device *vpbe_dev); + + /* Set DV preset at current output */ + int (*s_dv_timings)(struct vpbe_device *vpbe_dev, + struct v4l2_dv_timings *dv_timings); + + /* Get DV presets supported at the output */ + int (*g_dv_timings)(struct vpbe_device *vpbe_dev, + struct v4l2_dv_timings *dv_timings); + + /* Enumerate the DV Presets supported at the output */ + int (*enum_dv_timings)(struct vpbe_device *vpbe_dev, + struct v4l2_enum_dv_timings *timings_info); + + /* Set std at the output */ + int (*s_std)(struct vpbe_device *vpbe_dev, v4l2_std_id std_id); + + /* Get the current std at the output */ + int (*g_std)(struct vpbe_device *vpbe_dev, v4l2_std_id *std_id); + + /* initialize the device */ + int (*initialize)(struct device *dev, struct vpbe_device *vpbe_dev); + + /* De-initialize the device */ + void (*deinitialize)(struct device *dev, struct vpbe_device *vpbe_dev); + + /* Get the current mode info */ + int (*get_mode_info)(struct vpbe_device *vpbe_dev, + struct vpbe_enc_mode_info*); + + /* + * Set the current mode in the encoder. Alternate way of setting + * standard or DV preset or custom timings in the encoder + */ + int (*set_mode)(struct vpbe_device *vpbe_dev, + struct vpbe_enc_mode_info*); + /* Power management operations */ + int (*suspend)(struct vpbe_device *vpbe_dev); + int (*resume)(struct vpbe_device *vpbe_dev); +}; + +/* struct for vpbe device */ +struct vpbe_device { + /* V4l2 device */ + struct v4l2_device v4l2_dev; + /* vpbe dispay controller cfg */ + struct vpbe_config *cfg; + /* parent device */ + struct device *pdev; + /* external encoder v4l2 sub devices */ + struct v4l2_subdev **encoders; + /* current encoder index */ + int current_sd_index; + /* external amplifier v4l2 subdevice */ + struct v4l2_subdev *amp; + struct mutex lock; + /* device initialized */ + int initialized; + /* vpbe dac clock */ + struct clk *dac_clk; + /* osd_device pointer */ + struct osd_state *osd_device; + /* venc device pointer */ + struct venc_platform_data *venc_device; + /* + * fields below are accessed by users of vpbe_device. Not the + * ones above + */ + + /* current output */ + int current_out_index; + /* lock used by caller to do atomic operation on vpbe device */ + /* current timings set in the controller */ + struct vpbe_enc_mode_info current_timings; + /* venc sub device */ + struct v4l2_subdev *venc; + /* device operations below */ + struct vpbe_device_ops ops; +}; + +#endif diff --git a/include/media/davinci/vpbe_display.h b/include/media/davinci/vpbe_display.h new file mode 100644 index 000000000..6d2a93740 --- /dev/null +++ b/include/media/davinci/vpbe_display.h @@ -0,0 +1,122 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright (C) 2010 Texas Instruments Incorporated - https://www.ti.com/ + */ +#ifndef VPBE_DISPLAY_H +#define VPBE_DISPLAY_H + +/* Header files */ +#include <linux/videodev2.h> +#include <media/v4l2-common.h> +#include <media/v4l2-fh.h> +#include <media/videobuf2-v4l2.h> +#include <media/videobuf2-dma-contig.h> +#include <media/davinci/vpbe_types.h> +#include <media/davinci/vpbe_osd.h> +#include <media/davinci/vpbe.h> + +#define VPBE_DISPLAY_MAX_DEVICES 2 + +enum vpbe_display_device_id { + VPBE_DISPLAY_DEVICE_0, + VPBE_DISPLAY_DEVICE_1 +}; + +#define VPBE_DISPLAY_DRV_NAME "vpbe-display" + +#define VPBE_DISPLAY_MAJOR_RELEASE 1 +#define VPBE_DISPLAY_MINOR_RELEASE 0 +#define VPBE_DISPLAY_BUILD 1 +#define VPBE_DISPLAY_VERSION_CODE ((VPBE_DISPLAY_MAJOR_RELEASE << 16) | \ + (VPBE_DISPLAY_MINOR_RELEASE << 8) | \ + VPBE_DISPLAY_BUILD) + +#define VPBE_DISPLAY_VALID_FIELD(field) ((V4L2_FIELD_NONE == field) || \ + (V4L2_FIELD_ANY == field) || (V4L2_FIELD_INTERLACED == field)) + +/* Exp ratio numerator and denominator constants */ +#define VPBE_DISPLAY_H_EXP_RATIO_N 9 +#define VPBE_DISPLAY_H_EXP_RATIO_D 8 +#define VPBE_DISPLAY_V_EXP_RATIO_N 6 +#define VPBE_DISPLAY_V_EXP_RATIO_D 5 + +/* Zoom multiplication factor */ +#define VPBE_DISPLAY_ZOOM_4X 4 +#define VPBE_DISPLAY_ZOOM_2X 2 + +/* Structures */ +struct display_layer_info { + int enable; + /* Layer ID used by Display Manager */ + enum osd_layer id; + struct osd_layer_config config; + enum osd_zoom_factor h_zoom; + enum osd_zoom_factor v_zoom; + enum osd_h_exp_ratio h_exp; + enum osd_v_exp_ratio v_exp; +}; + +struct vpbe_disp_buffer { + struct vb2_v4l2_buffer vb; + struct list_head list; +}; + +/* vpbe display object structure */ +struct vpbe_layer { + /* Pointer to the vpbe_display */ + struct vpbe_display *disp_dev; + /* Pointer pointing to current v4l2_buffer */ + struct vpbe_disp_buffer *cur_frm; + /* Pointer pointing to next v4l2_buffer */ + struct vpbe_disp_buffer *next_frm; + /* videobuf specific parameters + * Buffer queue used in video-buf + */ + struct vb2_queue buffer_queue; + /* Queue of filled frames */ + struct list_head dma_queue; + /* Used in video-buf */ + spinlock_t irqlock; + /* V4l2 specific parameters */ + /* Identifies video device for this layer */ + struct video_device video_dev; + /* Used to store pixel format */ + struct v4l2_pix_format pix_fmt; + enum v4l2_field buf_field; + /* Video layer configuration params */ + struct display_layer_info layer_info; + /* vpbe specific parameters + * enable window for display + */ + unsigned char window_enable; + /* number of open instances of the layer */ + unsigned int usrs; + /* Indicates id of the field which is being displayed */ + unsigned int field_id; + /* Identifies device object */ + enum vpbe_display_device_id device_id; + /* facilitation of ioctl ops lock by v4l2*/ + struct mutex opslock; + u8 layer_first_int; +}; + +/* vpbe device structure */ +struct vpbe_display { + /* layer specific parameters */ + /* lock for isr updates to buf layers*/ + spinlock_t dma_queue_lock; + /* C-Plane offset from start of y-plane */ + unsigned int cbcr_ofst; + struct vpbe_layer *dev[VPBE_DISPLAY_MAX_DEVICES]; + struct vpbe_device *vpbe_dev; + struct osd_state *osd_device; +}; + +struct buf_config_params { + unsigned char min_numbuffers; + unsigned char numbuffers[VPBE_DISPLAY_MAX_DEVICES]; + unsigned int min_bufsize[VPBE_DISPLAY_MAX_DEVICES]; + unsigned int layer_bufsize[VPBE_DISPLAY_MAX_DEVICES]; +}; + +#endif /* VPBE_DISPLAY_H */ diff --git a/include/media/davinci/vpbe_osd.h b/include/media/davinci/vpbe_osd.h new file mode 100644 index 000000000..e1b1c76aa --- /dev/null +++ b/include/media/davinci/vpbe_osd.h @@ -0,0 +1,382 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright (C) 2007-2009 Texas Instruments Inc + * Copyright (C) 2007 MontaVista Software, Inc. + * + * Andy Lowe (alowe@mvista.com), MontaVista Software + * - Initial version + * Murali Karicheri (mkaricheri@gmail.com), Texas Instruments Ltd. + * - ported to sub device interface + */ +#ifndef _OSD_H +#define _OSD_H + +#include <media/davinci/vpbe_types.h> + +#define DM644X_VPBE_OSD_SUBDEV_NAME "dm644x,vpbe-osd" +#define DM365_VPBE_OSD_SUBDEV_NAME "dm365,vpbe-osd" +#define DM355_VPBE_OSD_SUBDEV_NAME "dm355,vpbe-osd" + +/** + * enum osd_layer + * @WIN_OSD0: On-Screen Display Window 0 + * @WIN_VID0: Video Window 0 + * @WIN_OSD1: On-Screen Display Window 1 + * @WIN_VID1: Video Window 1 + * + * Description: + * An enumeration of the osd display layers. + */ +enum osd_layer { + WIN_OSD0, + WIN_VID0, + WIN_OSD1, + WIN_VID1, +}; + +/** + * enum osd_win_layer + * @OSDWIN_OSD0: On-Screen Display Window 0 + * @OSDWIN_OSD1: On-Screen Display Window 1 + * + * Description: + * An enumeration of the OSD Window layers. + */ +enum osd_win_layer { + OSDWIN_OSD0, + OSDWIN_OSD1, +}; + +/** + * enum osd_pix_format + * @PIXFMT_1BPP: 1-bit-per-pixel bitmap + * @PIXFMT_2BPP: 2-bits-per-pixel bitmap + * @PIXFMT_4BPP: 4-bits-per-pixel bitmap + * @PIXFMT_8BPP: 8-bits-per-pixel bitmap + * @PIXFMT_RGB565: 16-bits-per-pixel RGB565 + * @PIXFMT_YCbCrI: YUV 4:2:2 + * @PIXFMT_RGB888: 24-bits-per-pixel RGB888 + * @PIXFMT_YCrCbI: YUV 4:2:2 with chroma swap + * @PIXFMT_NV12: YUV 4:2:0 planar + * @PIXFMT_OSD_ATTR: OSD Attribute Window pixel format (4bpp) + * + * Description: + * An enumeration of the DaVinci pixel formats. + */ +enum osd_pix_format { + PIXFMT_1BPP = 0, + PIXFMT_2BPP, + PIXFMT_4BPP, + PIXFMT_8BPP, + PIXFMT_RGB565, + PIXFMT_YCBCRI, + PIXFMT_RGB888, + PIXFMT_YCRCBI, + PIXFMT_NV12, + PIXFMT_OSD_ATTR, +}; + +/** + * enum osd_h_exp_ratio + * @H_EXP_OFF: no expansion (1/1) + * @H_EXP_9_OVER_8: 9/8 expansion ratio + * @H_EXP_3_OVER_2: 3/2 expansion ratio + * + * Description: + * An enumeration of the available horizontal expansion ratios. + */ +enum osd_h_exp_ratio { + H_EXP_OFF, + H_EXP_9_OVER_8, + H_EXP_3_OVER_2, +}; + +/** + * enum osd_v_exp_ratio + * @V_EXP_OFF: no expansion (1/1) + * @V_EXP_6_OVER_5: 6/5 expansion ratio + * + * Description: + * An enumeration of the available vertical expansion ratios. + */ +enum osd_v_exp_ratio { + V_EXP_OFF, + V_EXP_6_OVER_5, +}; + +/** + * enum osd_zoom_factor + * @ZOOM_X1: no zoom (x1) + * @ZOOM_X2: x2 zoom + * @ZOOM_X4: x4 zoom + * + * Description: + * An enumeration of the available zoom factors. + */ +enum osd_zoom_factor { + ZOOM_X1, + ZOOM_X2, + ZOOM_X4, +}; + +/** + * enum osd_clut + * @ROM_CLUT: ROM CLUT + * @RAM_CLUT: RAM CLUT + * + * Description: + * An enumeration of the available Color Lookup Tables (CLUTs). + */ +enum osd_clut { + ROM_CLUT, + RAM_CLUT, +}; + +/** + * enum osd_rom_clut + * @ROM_CLUT0: Macintosh CLUT + * @ROM_CLUT1: CLUT from DM270 and prior devices + * + * Description: + * An enumeration of the ROM Color Lookup Table (CLUT) options. + */ +enum osd_rom_clut { + ROM_CLUT0, + ROM_CLUT1, +}; + +/** + * enum osd_blending_factor + * @OSD_0_VID_8: OSD pixels are fully transparent + * @OSD_1_VID_7: OSD pixels contribute 1/8, video pixels contribute 7/8 + * @OSD_2_VID_6: OSD pixels contribute 2/8, video pixels contribute 6/8 + * @OSD_3_VID_5: OSD pixels contribute 3/8, video pixels contribute 5/8 + * @OSD_4_VID_4: OSD pixels contribute 4/8, video pixels contribute 4/8 + * @OSD_5_VID_3: OSD pixels contribute 5/8, video pixels contribute 3/8 + * @OSD_6_VID_2: OSD pixels contribute 6/8, video pixels contribute 2/8 + * @OSD_8_VID_0: OSD pixels are fully opaque + * + * Description: + * An enumeration of the DaVinci pixel blending factor options. + */ +enum osd_blending_factor { + OSD_0_VID_8, + OSD_1_VID_7, + OSD_2_VID_6, + OSD_3_VID_5, + OSD_4_VID_4, + OSD_5_VID_3, + OSD_6_VID_2, + OSD_8_VID_0, +}; + +/** + * enum osd_blink_interval + * @BLINK_X1: blink interval is 1 vertical refresh cycle + * @BLINK_X2: blink interval is 2 vertical refresh cycles + * @BLINK_X3: blink interval is 3 vertical refresh cycles + * @BLINK_X4: blink interval is 4 vertical refresh cycles + * + * Description: + * An enumeration of the DaVinci pixel blinking interval options. + */ +enum osd_blink_interval { + BLINK_X1, + BLINK_X2, + BLINK_X3, + BLINK_X4, +}; + +/** + * enum osd_cursor_h_width + * @H_WIDTH_1: horizontal line width is 1 pixel + * @H_WIDTH_4: horizontal line width is 4 pixels + * @H_WIDTH_8: horizontal line width is 8 pixels + * @H_WIDTH_12: horizontal line width is 12 pixels + * @H_WIDTH_16: horizontal line width is 16 pixels + * @H_WIDTH_20: horizontal line width is 20 pixels + * @H_WIDTH_24: horizontal line width is 24 pixels + * @H_WIDTH_28: horizontal line width is 28 pixels + */ +enum osd_cursor_h_width { + H_WIDTH_1, + H_WIDTH_4, + H_WIDTH_8, + H_WIDTH_12, + H_WIDTH_16, + H_WIDTH_20, + H_WIDTH_24, + H_WIDTH_28, +}; + +/** + * enum davinci_cursor_v_width + * @V_WIDTH_1: vertical line width is 1 line + * @V_WIDTH_2: vertical line width is 2 lines + * @V_WIDTH_4: vertical line width is 4 lines + * @V_WIDTH_6: vertical line width is 6 lines + * @V_WIDTH_8: vertical line width is 8 lines + * @V_WIDTH_10: vertical line width is 10 lines + * @V_WIDTH_12: vertical line width is 12 lines + * @V_WIDTH_14: vertical line width is 14 lines + */ +enum osd_cursor_v_width { + V_WIDTH_1, + V_WIDTH_2, + V_WIDTH_4, + V_WIDTH_6, + V_WIDTH_8, + V_WIDTH_10, + V_WIDTH_12, + V_WIDTH_14, +}; + +/** + * struct osd_cursor_config + * @xsize: horizontal size in pixels + * @ysize: vertical size in lines + * @xpos: horizontal offset in pixels from the left edge of the display + * @ypos: vertical offset in lines from the top of the display + * @interlaced: Non-zero if the display is interlaced, or zero otherwise + * @h_width: horizontal line width + * @v_width: vertical line width + * @clut: the CLUT selector (ROM or RAM) for the cursor color + * @clut_index: an index into the CLUT for the cursor color + * + * Description: + * A structure describing the configuration parameters of the hardware + * rectangular cursor. + */ +struct osd_cursor_config { + unsigned xsize; + unsigned ysize; + unsigned xpos; + unsigned ypos; + int interlaced; + enum osd_cursor_h_width h_width; + enum osd_cursor_v_width v_width; + enum osd_clut clut; + unsigned char clut_index; +}; + +/** + * struct osd_layer_config + * @pixfmt: pixel format + * @line_length: offset in bytes between start of each line in memory + * @xsize: number of horizontal pixels displayed per line + * @ysize: number of lines displayed + * @xpos: horizontal offset in pixels from the left edge of the display + * @ypos: vertical offset in lines from the top of the display + * @interlaced: Non-zero if the display is interlaced, or zero otherwise + * + * Description: + * A structure describing the configuration parameters of an On-Screen Display + * (OSD) or video layer related to how the image is stored in memory. + * @line_length must be a multiple of the cache line size (32 bytes). + */ +struct osd_layer_config { + enum osd_pix_format pixfmt; + unsigned line_length; + unsigned xsize; + unsigned ysize; + unsigned xpos; + unsigned ypos; + int interlaced; +}; + +/* parameters that apply on a per-window (OSD or video) basis */ +struct osd_window_state { + int is_allocated; + int is_enabled; + unsigned long fb_base_phys; + enum osd_zoom_factor h_zoom; + enum osd_zoom_factor v_zoom; + struct osd_layer_config lconfig; +}; + +/* parameters that apply on a per-OSD-window basis */ +struct osd_osdwin_state { + enum osd_clut clut; + enum osd_blending_factor blend; + int colorkey_blending; + unsigned colorkey; + int rec601_attenuation; + /* index is pixel value */ + unsigned char palette_map[16]; +}; + +/* hardware rectangular cursor parameters */ +struct osd_cursor_state { + int is_enabled; + struct osd_cursor_config config; +}; + +struct osd_state; + +struct vpbe_osd_ops { + int (*initialize)(struct osd_state *sd); + int (*request_layer)(struct osd_state *sd, enum osd_layer layer); + void (*release_layer)(struct osd_state *sd, enum osd_layer layer); + int (*enable_layer)(struct osd_state *sd, enum osd_layer layer, + int otherwin); + void (*disable_layer)(struct osd_state *sd, enum osd_layer layer); + int (*set_layer_config)(struct osd_state *sd, enum osd_layer layer, + struct osd_layer_config *lconfig); + void (*get_layer_config)(struct osd_state *sd, enum osd_layer layer, + struct osd_layer_config *lconfig); + void (*start_layer)(struct osd_state *sd, enum osd_layer layer, + unsigned long fb_base_phys, + unsigned long cbcr_ofst); + void (*set_left_margin)(struct osd_state *sd, u32 val); + void (*set_top_margin)(struct osd_state *sd, u32 val); + void (*set_interpolation_filter)(struct osd_state *sd, int filter); + int (*set_vid_expansion)(struct osd_state *sd, + enum osd_h_exp_ratio h_exp, + enum osd_v_exp_ratio v_exp); + void (*get_vid_expansion)(struct osd_state *sd, + enum osd_h_exp_ratio *h_exp, + enum osd_v_exp_ratio *v_exp); + void (*set_zoom)(struct osd_state *sd, enum osd_layer layer, + enum osd_zoom_factor h_zoom, + enum osd_zoom_factor v_zoom); +}; + +struct osd_state { + enum vpbe_version vpbe_type; + spinlock_t lock; + struct device *dev; + dma_addr_t osd_base_phys; + void __iomem *osd_base; + unsigned long osd_size; + /* 1-->the isr will toggle the VID0 ping-pong buffer */ + int pingpong; + int interpolation_filter; + int field_inversion; + enum osd_h_exp_ratio osd_h_exp; + enum osd_v_exp_ratio osd_v_exp; + enum osd_h_exp_ratio vid_h_exp; + enum osd_v_exp_ratio vid_v_exp; + enum osd_clut backg_clut; + unsigned backg_clut_index; + enum osd_rom_clut rom_clut; + int is_blinking; + /* attribute window blinking enabled */ + enum osd_blink_interval blink; + /* YCbCrI or YCrCbI */ + enum osd_pix_format yc_pixfmt; + /* columns are Y, Cb, Cr */ + unsigned char clut_ram[256][3]; + struct osd_cursor_state cursor; + /* OSD0, VID0, OSD1, VID1 */ + struct osd_window_state win[4]; + /* OSD0, OSD1 */ + struct osd_osdwin_state osdwin[2]; + /* OSD device Operations */ + struct vpbe_osd_ops ops; +}; + +struct osd_platform_data { + int field_inv_wa_enable; +}; + +#endif diff --git a/include/media/davinci/vpbe_types.h b/include/media/davinci/vpbe_types.h new file mode 100644 index 000000000..6015cda23 --- /dev/null +++ b/include/media/davinci/vpbe_types.h @@ -0,0 +1,74 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright (C) 2010 Texas Instruments Inc + */ +#ifndef _VPBE_TYPES_H +#define _VPBE_TYPES_H + +enum vpbe_version { + VPBE_VERSION_1 = 1, + VPBE_VERSION_2, + VPBE_VERSION_3, +}; + +/* vpbe_timing_type - Timing types used in vpbe device */ +enum vpbe_enc_timings_type { + VPBE_ENC_STD = 0x1, + VPBE_ENC_DV_TIMINGS = 0x4, + /* Used when set timings through FB device interface */ + VPBE_ENC_TIMINGS_INVALID = 0x8, +}; + +/* + * struct vpbe_enc_mode_info + * @name: ptr to name string of the standard, "NTSC", "PAL" etc + * @std: standard or non-standard mode. 1 - standard, 0 - nonstandard + * @interlaced: 1 - interlaced, 0 - non interlaced/progressive + * @xres: x or horizontal resolution of the display + * @yres: y or vertical resolution of the display + * @fps: frame per second + * @left_margin: left margin of the display + * @right_margin: right margin of the display + * @upper_margin: upper margin of the display + * @lower_margin: lower margin of the display + * @hsync_len: h-sync length + * @vsync_len: v-sync length + * @flags: bit field: bit usage is documented below + * + * Description: + * Structure holding timing and resolution information of a standard. + * Used by vpbe_device to set required non-standard timing in the + * venc when lcd controller output is connected to a external encoder. + * A table of timings is maintained in vpbe device to set this in + * venc when external encoder is connected to lcd controller output. + * Encoder may provide a g_dv_timings() API to override these values + * as needed. + * + * Notes + * ------ + * if_type should be used only by encoder manager and encoder. + * flags usage + * b0 (LSB) - hsync polarity, 0 - negative, 1 - positive + * b1 - vsync polarity, 0 - negative, 1 - positive + * b2 - field id polarity, 0 - negative, 1 - positive + */ +struct vpbe_enc_mode_info { + unsigned char *name; + enum vpbe_enc_timings_type timings_type; + v4l2_std_id std_id; + struct v4l2_dv_timings dv_timings; + unsigned int interlaced; + unsigned int xres; + unsigned int yres; + struct v4l2_fract aspect; + struct v4l2_fract fps; + unsigned int left_margin; + unsigned int right_margin; + unsigned int upper_margin; + unsigned int lower_margin; + unsigned int hsync_len; + unsigned int vsync_len; + unsigned int flags; +}; + +#endif diff --git a/include/media/davinci/vpbe_venc.h b/include/media/davinci/vpbe_venc.h new file mode 100644 index 000000000..93cf6a5fb --- /dev/null +++ b/include/media/davinci/vpbe_venc.h @@ -0,0 +1,37 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright (C) 2010 Texas Instruments Inc + */ +#ifndef _VPBE_VENC_H +#define _VPBE_VENC_H + +#include <media/v4l2-subdev.h> +#include <media/davinci/vpbe_types.h> + +#define DM644X_VPBE_VENC_SUBDEV_NAME "dm644x,vpbe-venc" +#define DM365_VPBE_VENC_SUBDEV_NAME "dm365,vpbe-venc" +#define DM355_VPBE_VENC_SUBDEV_NAME "dm355,vpbe-venc" + +/* venc events */ +#define VENC_END_OF_FRAME BIT(0) +#define VENC_FIRST_FIELD BIT(1) +#define VENC_SECOND_FIELD BIT(2) + +struct venc_platform_data { + int (*setup_pinmux)(u32 if_type, int field); + int (*setup_clock)(enum vpbe_enc_timings_type type, + unsigned int pixclock); + int (*setup_if_config)(u32 pixcode); + /* Number of LCD outputs supported */ + int num_lcd_outputs; + struct vpbe_if_params *lcd_if_params; +}; + +enum venc_ioctls { + VENC_GET_FLD = 1, +}; + +/* exported functions */ +struct v4l2_subdev *venc_sub_dev_init(struct v4l2_device *v4l2_dev, + const char *venc_name); +#endif diff --git a/include/media/davinci/vpfe_capture.h b/include/media/davinci/vpfe_capture.h new file mode 100644 index 000000000..4ad53031e --- /dev/null +++ b/include/media/davinci/vpfe_capture.h @@ -0,0 +1,177 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * Copyright (C) 2008-2009 Texas Instruments Inc + */ + +#ifndef _VPFE_CAPTURE_H +#define _VPFE_CAPTURE_H + +#ifdef __KERNEL__ + +/* Header files */ +#include <media/v4l2-dev.h> +#include <linux/videodev2.h> +#include <linux/clk.h> +#include <linux/i2c.h> +#include <media/v4l2-fh.h> +#include <media/v4l2-ioctl.h> +#include <media/v4l2-device.h> +#include <media/videobuf-dma-contig.h> +#include <media/davinci/vpfe_types.h> + +#define VPFE_CAPTURE_NUM_DECODERS 5 + +/* Macros */ +#define VPFE_MAJOR_RELEASE 0 +#define VPFE_MINOR_RELEASE 0 +#define VPFE_BUILD 1 +#define VPFE_CAPTURE_VERSION_CODE ((VPFE_MAJOR_RELEASE << 16) | \ + (VPFE_MINOR_RELEASE << 8) | \ + VPFE_BUILD) + +#define CAPTURE_DRV_NAME "vpfe-capture" + +struct vpfe_pixel_format { + u32 pixelformat; + /* bytes per pixel */ + int bpp; +}; + +struct vpfe_std_info { + int active_pixels; + int active_lines; + /* current frame format */ + int frame_format; +}; + +struct vpfe_route { + u32 input; + u32 output; +}; + +struct vpfe_subdev_info { + /* Sub device name */ + char name[32]; + /* Sub device group id */ + int grp_id; + /* Number of inputs supported */ + int num_inputs; + /* inputs available at the sub device */ + struct v4l2_input *inputs; + /* Sub dev routing information for each input */ + struct vpfe_route *routes; + /* check if sub dev supports routing */ + int can_route; + /* ccdc bus/interface configuration */ + struct vpfe_hw_if_param ccdc_if_params; + /* i2c subdevice board info */ + struct i2c_board_info board_info; +}; + +struct vpfe_config { + /* Number of sub devices connected to vpfe */ + int num_subdevs; + /* i2c bus adapter no */ + int i2c_adapter_id; + /* information about each subdev */ + struct vpfe_subdev_info *sub_devs; + /* evm card info */ + char *card_name; + /* ccdc name */ + char *ccdc; + /* vpfe clock */ + struct clk *vpssclk; + struct clk *slaveclk; + /* Function for Clearing the interrupt */ + void (*clr_intr)(int vdint); +}; + +struct vpfe_device { + /* V4l2 specific parameters */ + /* Identifies video device for this channel */ + struct video_device video_dev; + /* sub devices */ + struct v4l2_subdev **sd; + /* vpfe cfg */ + struct vpfe_config *cfg; + /* V4l2 device */ + struct v4l2_device v4l2_dev; + /* parent device */ + struct device *pdev; + /* number of open instances of the channel */ + u32 usrs; + /* Indicates id of the field which is being displayed */ + u32 field_id; + /* flag to indicate whether decoder is initialized */ + u8 initialized; + /* current interface type */ + struct vpfe_hw_if_param vpfe_if_params; + /* ptr to currently selected sub device */ + struct vpfe_subdev_info *current_subdev; + /* current input at the sub device */ + int current_input; + /* Keeps track of the information about the standard */ + struct vpfe_std_info std_info; + /* std index into std table */ + int std_index; + /* CCDC IRQs used when CCDC/ISIF output to SDRAM */ + unsigned int ccdc_irq0; + unsigned int ccdc_irq1; + /* number of buffers in fbuffers */ + u32 numbuffers; + /* List of buffer pointers for storing frames */ + u8 *fbuffers[VIDEO_MAX_FRAME]; + /* Pointer pointing to current v4l2_buffer */ + struct videobuf_buffer *cur_frm; + /* Pointer pointing to next v4l2_buffer */ + struct videobuf_buffer *next_frm; + /* + * This field keeps track of type of buffer exchange mechanism + * user has selected + */ + enum v4l2_memory memory; + /* Used to store pixel format */ + struct v4l2_format fmt; + /* + * used when IMP is chained to store the crop window which + * is different from the image window + */ + struct v4l2_rect crop; + /* Buffer queue used in video-buf */ + struct videobuf_queue buffer_queue; + /* Queue of filled frames */ + struct list_head dma_queue; + /* Used in video-buf */ + spinlock_t irqlock; + /* IRQ lock for DMA queue */ + spinlock_t dma_queue_lock; + /* lock used to access this structure */ + struct mutex lock; + /* number of users performing IO */ + u32 io_usrs; + /* Indicates whether streaming started */ + u8 started; + /* + * offset where second field starts from the starting of the + * buffer for field separated YCbCr formats + */ + u32 field_off; +}; + +/* File handle structure */ +struct vpfe_fh { + struct v4l2_fh fh; + struct vpfe_device *vpfe_dev; + /* Indicates whether this file handle is doing IO */ + u8 io_allowed; +}; + +struct vpfe_config_params { + u8 min_numbuffers; + u8 numbuffers; + u32 min_bufsize; + u32 device_bufsize; +}; + +#endif /* End of __KERNEL__ */ +#endif /* _DAVINCI_VPFE_H */ diff --git a/include/media/davinci/vpfe_types.h b/include/media/davinci/vpfe_types.h new file mode 100644 index 000000000..e65c9a48d --- /dev/null +++ b/include/media/davinci/vpfe_types.h @@ -0,0 +1,38 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * Copyright (C) 2008-2009 Texas Instruments Inc + */ +#ifndef _VPFE_TYPES_H +#define _VPFE_TYPES_H + +#ifdef __KERNEL__ + +enum vpfe_pin_pol { + VPFE_PINPOL_POSITIVE, + VPFE_PINPOL_NEGATIVE +}; + +enum vpfe_hw_if_type { + /* BT656 - 8 bit */ + VPFE_BT656, + /* BT1120 - 16 bit */ + VPFE_BT1120, + /* Raw Bayer */ + VPFE_RAW_BAYER, + /* YCbCr - 8 bit with external sync */ + VPFE_YCBCR_SYNC_8, + /* YCbCr - 16 bit with external sync */ + VPFE_YCBCR_SYNC_16, + /* BT656 - 10 bit */ + VPFE_BT656_10BIT +}; + +/* interface description */ +struct vpfe_hw_if_param { + enum vpfe_hw_if_type if_type; + enum vpfe_pin_pol hdpol; + enum vpfe_pin_pol vdpol; +}; + +#endif +#endif diff --git a/include/media/davinci/vpif_types.h b/include/media/davinci/vpif_types.h new file mode 100644 index 000000000..8439e46fb --- /dev/null +++ b/include/media/davinci/vpif_types.h @@ -0,0 +1,80 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright (C) 2011 Texas Instruments Inc + */ +#ifndef _VPIF_TYPES_H +#define _VPIF_TYPES_H + +#include <linux/i2c.h> + +#define VPIF_CAPTURE_MAX_CHANNELS 2 +#define VPIF_DISPLAY_MAX_CHANNELS 2 + +enum vpif_if_type { + VPIF_IF_BT656, + VPIF_IF_BT1120, + VPIF_IF_RAW_BAYER +}; + +struct vpif_interface { + enum vpif_if_type if_type; + unsigned hd_pol:1; + unsigned vd_pol:1; + unsigned fid_pol:1; +}; + +struct vpif_subdev_info { + const char *name; + struct i2c_board_info board_info; +}; + +struct vpif_output { + struct v4l2_output output; + const char *subdev_name; + u32 input_route; + u32 output_route; +}; + +struct vpif_display_chan_config { + const struct vpif_output *outputs; + int output_count; + bool clip_en; +}; + +struct vpif_display_config { + int (*set_clock)(int, int); + struct vpif_subdev_info *subdevinfo; + int subdev_count; + int i2c_adapter_id; + struct vpif_display_chan_config chan_config[VPIF_DISPLAY_MAX_CHANNELS]; + const char *card_name; + struct v4l2_async_subdev **asd; /* Flat array, arranged in groups */ + int *asd_sizes; /* 0-terminated array of asd group sizes */ +}; + +struct vpif_input { + struct v4l2_input input; + char *subdev_name; + u32 input_route; + u32 output_route; +}; + +struct vpif_capture_chan_config { + struct vpif_interface vpif_if; + struct vpif_input *inputs; + int input_count; +}; + +struct vpif_capture_config { + int (*setup_input_channel_mode)(int); + int (*setup_input_path)(int, const char *); + struct vpif_capture_chan_config chan_config[VPIF_CAPTURE_MAX_CHANNELS]; + struct vpif_subdev_info *subdev_info; + int subdev_count; + int i2c_adapter_id; + const char *card_name; + + struct v4l2_async_subdev *asd[VPIF_CAPTURE_MAX_CHANNELS]; + int asd_sizes[VPIF_CAPTURE_MAX_CHANNELS]; +}; +#endif /* _VPIF_TYPES_H */ diff --git a/include/media/davinci/vpss.h b/include/media/davinci/vpss.h new file mode 100644 index 000000000..315fa77e2 --- /dev/null +++ b/include/media/davinci/vpss.h @@ -0,0 +1,111 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * Copyright (C) 2009 Texas Instruments Inc + * + * vpss - video processing subsystem module header file. + * + * Include this header file if a driver needs to configure vpss system + * module. It exports a set of library functions for video drivers to + * configure vpss system module functions such as clock enable/disable, + * vpss interrupt mux to arm, and other common vpss system module + * functions. + */ +#ifndef _VPSS_H +#define _VPSS_H + +/* selector for ccdc input selection on DM355 */ +enum vpss_ccdc_source_sel { + VPSS_CCDCIN, + VPSS_HSSIIN, + VPSS_PGLPBK, /* for DM365 only */ + VPSS_CCDCPG /* for DM365 only */ +}; + +struct vpss_sync_pol { + unsigned int ccdpg_hdpol:1; + unsigned int ccdpg_vdpol:1; +}; + +struct vpss_pg_frame_size { + short hlpfr; + short pplen; +}; + +/* Used for enable/disable VPSS Clock */ +enum vpss_clock_sel { + /* DM355/DM365 */ + VPSS_CCDC_CLOCK, + VPSS_IPIPE_CLOCK, + VPSS_H3A_CLOCK, + VPSS_CFALD_CLOCK, + /* + * When using VPSS_VENC_CLOCK_SEL in vpss_enable_clock() api + * following applies:- + * en = 0 selects ENC_CLK + * en = 1 selects ENC_CLK/2 + */ + VPSS_VENC_CLOCK_SEL, + VPSS_VPBE_CLOCK, + /* DM365 only clocks */ + VPSS_IPIPEIF_CLOCK, + VPSS_RSZ_CLOCK, + VPSS_BL_CLOCK, + /* + * When using VPSS_PCLK_INTERNAL in vpss_enable_clock() api + * following applies:- + * en = 0 disable internal PCLK + * en = 1 enables internal PCLK + */ + VPSS_PCLK_INTERNAL, + /* + * When using VPSS_PSYNC_CLOCK_SEL in vpss_enable_clock() api + * following applies:- + * en = 0 enables MMR clock + * en = 1 enables VPSS clock + */ + VPSS_PSYNC_CLOCK_SEL, + VPSS_LDC_CLOCK_SEL, + VPSS_OSD_CLOCK_SEL, + VPSS_FDIF_CLOCK, + VPSS_LDC_CLOCK +}; + +/* select input to ccdc on dm355 */ +int vpss_select_ccdc_source(enum vpss_ccdc_source_sel src_sel); +/* enable/disable a vpss clock, 0 - success, -1 - failure */ +int vpss_enable_clock(enum vpss_clock_sel clock_sel, int en); +/* set sync polarity, only for DM365*/ +void dm365_vpss_set_sync_pol(struct vpss_sync_pol); +/* set the PG_FRAME_SIZE register, only for DM365 */ +void dm365_vpss_set_pg_frame_size(struct vpss_pg_frame_size); + +/* wbl reset for dm644x */ +enum vpss_wbl_sel { + VPSS_PCR_AEW_WBL_0 = 16, + VPSS_PCR_AF_WBL_0, + VPSS_PCR_RSZ4_WBL_0, + VPSS_PCR_RSZ3_WBL_0, + VPSS_PCR_RSZ2_WBL_0, + VPSS_PCR_RSZ1_WBL_0, + VPSS_PCR_PREV_WBL_0, + VPSS_PCR_CCDC_WBL_O, +}; +/* clear wbl overflow flag for DM6446 */ +int vpss_clear_wbl_overflow(enum vpss_wbl_sel wbl_sel); + +/* set sync polarity*/ +void vpss_set_sync_pol(struct vpss_sync_pol sync); +/* set the PG_FRAME_SIZE register */ +void vpss_set_pg_frame_size(struct vpss_pg_frame_size frame_size); +/* + * vpss_check_and_clear_interrupt - check and clear interrupt + * @irq - common enumerator for IRQ + * + * Following return values used:- + * 0 - interrupt occurred and cleared + * 1 - interrupt not occurred + * 2 - interrupt status not available + */ +int vpss_dma_complete_interrupt(void); + +#endif diff --git a/include/media/demux.h b/include/media/demux.h new file mode 100644 index 000000000..bf00a5a41 --- /dev/null +++ b/include/media/demux.h @@ -0,0 +1,600 @@ +/* + * demux.h + * + * The Kernel Digital TV Demux kABI defines a driver-internal interface for + * registering low-level, hardware specific driver to a hardware independent + * demux layer. + * + * Copyright (c) 2002 Convergence GmbH + * + * based on code: + * Copyright (c) 2000 Nokia Research Center + * Tampere, FINLAND + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU Lesser General Public License + * as published by the Free Software Foundation; either version 2.1 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#ifndef __DEMUX_H +#define __DEMUX_H + +#include <linux/types.h> +#include <linux/errno.h> +#include <linux/list.h> +#include <linux/time.h> +#include <linux/dvb/dmx.h> + +/* + * Common definitions + */ + +/* + * DMX_MAX_FILTER_SIZE: Maximum length (in bytes) of a section/PES filter. + */ + +#ifndef DMX_MAX_FILTER_SIZE +#define DMX_MAX_FILTER_SIZE 18 +#endif + +/* + * DMX_MAX_SECFEED_SIZE: Maximum length (in bytes) of a private section feed + * filter. + */ + +#ifndef DMX_MAX_SECTION_SIZE +#define DMX_MAX_SECTION_SIZE 4096 +#endif +#ifndef DMX_MAX_SECFEED_SIZE +#define DMX_MAX_SECFEED_SIZE (DMX_MAX_SECTION_SIZE + 188) +#endif + +/* + * TS packet reception + */ + +/** + * enum ts_filter_type - filter type bitmap for dmx_ts_feed.set\(\) + * + * @TS_PACKET: Send TS packets (188 bytes) to callback (default). + * @TS_PAYLOAD_ONLY: In case TS_PACKET is set, only send the TS payload + * (<=184 bytes per packet) to callback + * @TS_DECODER: Send stream to built-in decoder (if present). + * @TS_DEMUX: In case TS_PACKET is set, send the TS to the demux + * device, not to the dvr device + */ +enum ts_filter_type { + TS_PACKET = 1, + TS_PAYLOAD_ONLY = 2, + TS_DECODER = 4, + TS_DEMUX = 8, +}; + +/** + * struct dmx_ts_feed - Structure that contains a TS feed filter + * + * @is_filtering: Set to non-zero when filtering in progress + * @parent: pointer to struct dmx_demux + * @priv: pointer to private data of the API client + * @set: sets the TS filter + * @start_filtering: starts TS filtering + * @stop_filtering: stops TS filtering + * + * A TS feed is typically mapped to a hardware PID filter on the demux chip. + * Using this API, the client can set the filtering properties to start/stop + * filtering TS packets on a particular TS feed. + */ +struct dmx_ts_feed { + int is_filtering; + struct dmx_demux *parent; + void *priv; + int (*set)(struct dmx_ts_feed *feed, + u16 pid, + int type, + enum dmx_ts_pes pes_type, + ktime_t timeout); + int (*start_filtering)(struct dmx_ts_feed *feed); + int (*stop_filtering)(struct dmx_ts_feed *feed); +}; + +/* + * Section reception + */ + +/** + * struct dmx_section_filter - Structure that describes a section filter + * + * @filter_value: Contains up to 16 bytes (128 bits) of the TS section header + * that will be matched by the section filter + * @filter_mask: Contains a 16 bytes (128 bits) filter mask with the bits + * specified by @filter_value that will be used on the filter + * match logic. + * @filter_mode: Contains a 16 bytes (128 bits) filter mode. + * @parent: Back-pointer to struct dmx_section_feed. + * @priv: Pointer to private data of the API client. + * + * + * The @filter_mask controls which bits of @filter_value are compared with + * the section headers/payload. On a binary value of 1 in filter_mask, the + * corresponding bits are compared. The filter only accepts sections that are + * equal to filter_value in all the tested bit positions. + */ +struct dmx_section_filter { + u8 filter_value[DMX_MAX_FILTER_SIZE]; + u8 filter_mask[DMX_MAX_FILTER_SIZE]; + u8 filter_mode[DMX_MAX_FILTER_SIZE]; + struct dmx_section_feed *parent; + + void *priv; +}; + +/** + * struct dmx_section_feed - Structure that contains a section feed filter + * + * @is_filtering: Set to non-zero when filtering in progress + * @parent: pointer to struct dmx_demux + * @priv: pointer to private data of the API client + * @check_crc: If non-zero, check the CRC values of filtered sections. + * @set: sets the section filter + * @allocate_filter: This function is used to allocate a section filter on + * the demux. It should only be called when no filtering + * is in progress on this section feed. If a filter cannot + * be allocated, the function fails with -ENOSPC. + * @release_filter: This function releases all the resources of a + * previously allocated section filter. The function + * should not be called while filtering is in progress + * on this section feed. After calling this function, + * the caller should not try to dereference the filter + * pointer. + * @start_filtering: starts section filtering + * @stop_filtering: stops section filtering + * + * A TS feed is typically mapped to a hardware PID filter on the demux chip. + * Using this API, the client can set the filtering properties to start/stop + * filtering TS packets on a particular TS feed. + */ +struct dmx_section_feed { + int is_filtering; + struct dmx_demux *parent; + void *priv; + + int check_crc; + + /* private: Used internally at dvb_demux.c */ + u32 crc_val; + + u8 *secbuf; + u8 secbuf_base[DMX_MAX_SECFEED_SIZE]; + u16 secbufp, seclen, tsfeedp; + + /* public: */ + int (*set)(struct dmx_section_feed *feed, + u16 pid, + int check_crc); + int (*allocate_filter)(struct dmx_section_feed *feed, + struct dmx_section_filter **filter); + int (*release_filter)(struct dmx_section_feed *feed, + struct dmx_section_filter *filter); + int (*start_filtering)(struct dmx_section_feed *feed); + int (*stop_filtering)(struct dmx_section_feed *feed); +}; + +/** + * typedef dmx_ts_cb - DVB demux TS filter callback function prototype + * + * @buffer1: Pointer to the start of the filtered TS packets. + * @buffer1_length: Length of the TS data in buffer1. + * @buffer2: Pointer to the tail of the filtered TS packets, or NULL. + * @buffer2_length: Length of the TS data in buffer2. + * @source: Indicates which TS feed is the source of the callback. + * @buffer_flags: Address where buffer flags are stored. Those are + * used to report discontinuity users via DVB + * memory mapped API, as defined by + * &enum dmx_buffer_flags. + * + * This function callback prototype, provided by the client of the demux API, + * is called from the demux code. The function is only called when filtering + * on a TS feed has been enabled using the start_filtering\(\) function at + * the &dmx_demux. + * Any TS packets that match the filter settings are copied to a circular + * buffer. The filtered TS packets are delivered to the client using this + * callback function. + * It is expected that the @buffer1 and @buffer2 callback parameters point to + * addresses within the circular buffer, but other implementations are also + * possible. Note that the called party should not try to free the memory + * the @buffer1 and @buffer2 parameters point to. + * + * When this function is called, the @buffer1 parameter typically points to + * the start of the first undelivered TS packet within a circular buffer. + * The @buffer2 buffer parameter is normally NULL, except when the received + * TS packets have crossed the last address of the circular buffer and + * "wrapped" to the beginning of the buffer. In the latter case the @buffer1 + * parameter would contain an address within the circular buffer, while the + * @buffer2 parameter would contain the first address of the circular buffer. + * The number of bytes delivered with this function (i.e. @buffer1_length + + * @buffer2_length) is usually equal to the value of callback_length parameter + * given in the set() function, with one exception: if a timeout occurs before + * receiving callback_length bytes of TS data, any undelivered packets are + * immediately delivered to the client by calling this function. The timeout + * duration is controlled by the set() function in the TS Feed API. + * + * If a TS packet is received with errors that could not be fixed by the + * TS-level forward error correction (FEC), the Transport_error_indicator + * flag of the TS packet header should be set. The TS packet should not be + * discarded, as the error can possibly be corrected by a higher layer + * protocol. If the called party is slow in processing the callback, it + * is possible that the circular buffer eventually fills up. If this happens, + * the demux driver should discard any TS packets received while the buffer + * is full and return -EOVERFLOW. + * + * The type of data returned to the callback can be selected by the + * &dmx_ts_feed.@set function. The type parameter decides if the raw + * TS packet (TS_PACKET) or just the payload (TS_PACKET|TS_PAYLOAD_ONLY) + * should be returned. If additionally the TS_DECODER bit is set the stream + * will also be sent to the hardware MPEG decoder. + * + * Return: + * + * - 0, on success; + * + * - -EOVERFLOW, on buffer overflow. + */ +typedef int (*dmx_ts_cb)(const u8 *buffer1, + size_t buffer1_length, + const u8 *buffer2, + size_t buffer2_length, + struct dmx_ts_feed *source, + u32 *buffer_flags); + +/** + * typedef dmx_section_cb - DVB demux TS filter callback function prototype + * + * @buffer1: Pointer to the start of the filtered section, e.g. + * within the circular buffer of the demux driver. + * @buffer1_len: Length of the filtered section data in @buffer1, + * including headers and CRC. + * @buffer2: Pointer to the tail of the filtered section data, + * or NULL. Useful to handle the wrapping of a + * circular buffer. + * @buffer2_len: Length of the filtered section data in @buffer2, + * including headers and CRC. + * @source: Indicates which section feed is the source of the + * callback. + * @buffer_flags: Address where buffer flags are stored. Those are + * used to report discontinuity users via DVB + * memory mapped API, as defined by + * &enum dmx_buffer_flags. + * + * This function callback prototype, provided by the client of the demux API, + * is called from the demux code. The function is only called when + * filtering of sections has been enabled using the function + * &dmx_ts_feed.@start_filtering. When the demux driver has received a + * complete section that matches at least one section filter, the client + * is notified via this callback function. Normally this function is called + * for each received section; however, it is also possible to deliver + * multiple sections with one callback, for example when the system load + * is high. If an error occurs while receiving a section, this + * function should be called with the corresponding error type set in the + * success field, whether or not there is data to deliver. The Section Feed + * implementation should maintain a circular buffer for received sections. + * However, this is not necessary if the Section Feed API is implemented as + * a client of the TS Feed API, because the TS Feed implementation then + * buffers the received data. The size of the circular buffer can be + * configured using the &dmx_ts_feed.@set function in the Section Feed API. + * If there is no room in the circular buffer when a new section is received, + * the section must be discarded. If this happens, the value of the success + * parameter should be DMX_OVERRUN_ERROR on the next callback. + */ +typedef int (*dmx_section_cb)(const u8 *buffer1, + size_t buffer1_len, + const u8 *buffer2, + size_t buffer2_len, + struct dmx_section_filter *source, + u32 *buffer_flags); + +/* + * DVB Front-End + */ + +/** + * enum dmx_frontend_source - Used to identify the type of frontend + * + * @DMX_MEMORY_FE: The source of the demux is memory. It means that + * the MPEG-TS to be filtered comes from userspace, + * via write() syscall. + * + * @DMX_FRONTEND_0: The source of the demux is a frontend connected + * to the demux. + */ +enum dmx_frontend_source { + DMX_MEMORY_FE, + DMX_FRONTEND_0, +}; + +/** + * struct dmx_frontend - Structure that lists the frontends associated with + * a demux + * + * @connectivity_list: List of front-ends that can be connected to a + * particular demux; + * @source: Type of the frontend. + * + * FIXME: this structure should likely be replaced soon by some + * media-controller based logic. + */ +struct dmx_frontend { + struct list_head connectivity_list; + enum dmx_frontend_source source; +}; + +/* + * MPEG-2 TS Demux + */ + +/** + * enum dmx_demux_caps - MPEG-2 TS Demux capabilities bitmap + * + * @DMX_TS_FILTERING: set if TS filtering is supported; + * @DMX_SECTION_FILTERING: set if section filtering is supported; + * @DMX_MEMORY_BASED_FILTERING: set if write() available. + * + * Those flags are OR'ed in the &dmx_demux.capabilities field + */ +enum dmx_demux_caps { + DMX_TS_FILTERING = 1, + DMX_SECTION_FILTERING = 4, + DMX_MEMORY_BASED_FILTERING = 8, +}; + +/* + * Demux resource type identifier. + */ + +/** + * DMX_FE_ENTRY - Casts elements in the list of registered + * front-ends from the generic type struct list_head + * to the type * struct dmx_frontend + * + * @list: list of struct dmx_frontend + */ +#define DMX_FE_ENTRY(list) \ + list_entry(list, struct dmx_frontend, connectivity_list) + +/** + * struct dmx_demux - Structure that contains the demux capabilities and + * callbacks. + * + * @capabilities: Bitfield of capability flags. + * + * @frontend: Front-end connected to the demux + * + * @priv: Pointer to private data of the API client + * + * @open: This function reserves the demux for use by the caller and, if + * necessary, initializes the demux. When the demux is no longer needed, + * the function @close should be called. It should be possible for + * multiple clients to access the demux at the same time. Thus, the + * function implementation should increment the demux usage count when + * @open is called and decrement it when @close is called. + * The @demux function parameter contains a pointer to the demux API and + * instance data. + * It returns: + * 0 on success; + * -EUSERS, if maximum usage count was reached; + * -EINVAL, on bad parameter. + * + * @close: This function reserves the demux for use by the caller and, if + * necessary, initializes the demux. When the demux is no longer needed, + * the function @close should be called. It should be possible for + * multiple clients to access the demux at the same time. Thus, the + * function implementation should increment the demux usage count when + * @open is called and decrement it when @close is called. + * The @demux function parameter contains a pointer to the demux API and + * instance data. + * It returns: + * 0 on success; + * -ENODEV, if demux was not in use (e. g. no users); + * -EINVAL, on bad parameter. + * + * @write: This function provides the demux driver with a memory buffer + * containing TS packets. Instead of receiving TS packets from the DVB + * front-end, the demux driver software will read packets from memory. + * Any clients of this demux with active TS, PES or Section filters will + * receive filtered data via the Demux callback API (see 0). The function + * returns when all the data in the buffer has been consumed by the demux. + * Demux hardware typically cannot read TS from memory. If this is the + * case, memory-based filtering has to be implemented entirely in software. + * The @demux function parameter contains a pointer to the demux API and + * instance data. + * The @buf function parameter contains a pointer to the TS data in + * kernel-space memory. + * The @count function parameter contains the length of the TS data. + * It returns: + * 0 on success; + * -ERESTARTSYS, if mutex lock was interrupted; + * -EINTR, if a signal handling is pending; + * -ENODEV, if demux was removed; + * -EINVAL, on bad parameter. + * + * @allocate_ts_feed: Allocates a new TS feed, which is used to filter the TS + * packets carrying a certain PID. The TS feed normally corresponds to a + * hardware PID filter on the demux chip. + * The @demux function parameter contains a pointer to the demux API and + * instance data. + * The @feed function parameter contains a pointer to the TS feed API and + * instance data. + * The @callback function parameter contains a pointer to the callback + * function for passing received TS packet. + * It returns: + * 0 on success; + * -ERESTARTSYS, if mutex lock was interrupted; + * -EBUSY, if no more TS feeds is available; + * -EINVAL, on bad parameter. + * + * @release_ts_feed: Releases the resources allocated with @allocate_ts_feed. + * Any filtering in progress on the TS feed should be stopped before + * calling this function. + * The @demux function parameter contains a pointer to the demux API and + * instance data. + * The @feed function parameter contains a pointer to the TS feed API and + * instance data. + * It returns: + * 0 on success; + * -EINVAL on bad parameter. + * + * @allocate_section_feed: Allocates a new section feed, i.e. a demux resource + * for filtering and receiving sections. On platforms with hardware + * support for section filtering, a section feed is directly mapped to + * the demux HW. On other platforms, TS packets are first PID filtered in + * hardware and a hardware section filter then emulated in software. The + * caller obtains an API pointer of type dmx_section_feed_t as an out + * parameter. Using this API the caller can set filtering parameters and + * start receiving sections. + * The @demux function parameter contains a pointer to the demux API and + * instance data. + * The @feed function parameter contains a pointer to the TS feed API and + * instance data. + * The @callback function parameter contains a pointer to the callback + * function for passing received TS packet. + * It returns: + * 0 on success; + * -EBUSY, if no more TS feeds is available; + * -EINVAL, on bad parameter. + * + * @release_section_feed: Releases the resources allocated with + * @allocate_section_feed, including allocated filters. Any filtering in + * progress on the section feed should be stopped before calling this + * function. + * The @demux function parameter contains a pointer to the demux API and + * instance data. + * The @feed function parameter contains a pointer to the TS feed API and + * instance data. + * It returns: + * 0 on success; + * -EINVAL, on bad parameter. + * + * @add_frontend: Registers a connectivity between a demux and a front-end, + * i.e., indicates that the demux can be connected via a call to + * @connect_frontend to use the given front-end as a TS source. The + * client of this function has to allocate dynamic or static memory for + * the frontend structure and initialize its fields before calling this + * function. This function is normally called during the driver + * initialization. The caller must not free the memory of the frontend + * struct before successfully calling @remove_frontend. + * The @demux function parameter contains a pointer to the demux API and + * instance data. + * The @frontend function parameter contains a pointer to the front-end + * instance data. + * It returns: + * 0 on success; + * -EINVAL, on bad parameter. + * + * @remove_frontend: Indicates that the given front-end, registered by a call + * to @add_frontend, can no longer be connected as a TS source by this + * demux. The function should be called when a front-end driver or a demux + * driver is removed from the system. If the front-end is in use, the + * function fails with the return value of -EBUSY. After successfully + * calling this function, the caller can free the memory of the frontend + * struct if it was dynamically allocated before the @add_frontend + * operation. + * The @demux function parameter contains a pointer to the demux API and + * instance data. + * The @frontend function parameter contains a pointer to the front-end + * instance data. + * It returns: + * 0 on success; + * -ENODEV, if the front-end was not found, + * -EINVAL, on bad parameter. + * + * @get_frontends: Provides the APIs of the front-ends that have been + * registered for this demux. Any of the front-ends obtained with this + * call can be used as a parameter for @connect_frontend. The include + * file demux.h contains the macro DMX_FE_ENTRY() for converting an + * element of the generic type struct &list_head * to the type + * struct &dmx_frontend *. The caller must not free the memory of any of + * the elements obtained via this function call. + * The @demux function parameter contains a pointer to the demux API and + * instance data. + * It returns a struct list_head pointer to the list of front-end + * interfaces, or NULL in the case of an empty list. + * + * @connect_frontend: Connects the TS output of the front-end to the input of + * the demux. A demux can only be connected to a front-end registered to + * the demux with the function @add_frontend. It may or may not be + * possible to connect multiple demuxes to the same front-end, depending + * on the capabilities of the HW platform. When not used, the front-end + * should be released by calling @disconnect_frontend. + * The @demux function parameter contains a pointer to the demux API and + * instance data. + * The @frontend function parameter contains a pointer to the front-end + * instance data. + * It returns: + * 0 on success; + * -EINVAL, on bad parameter. + * + * @disconnect_frontend: Disconnects the demux and a front-end previously + * connected by a @connect_frontend call. + * The @demux function parameter contains a pointer to the demux API and + * instance data. + * It returns: + * 0 on success; + * -EINVAL on bad parameter. + * + * @get_pes_pids: Get the PIDs for DMX_PES_AUDIO0, DMX_PES_VIDEO0, + * DMX_PES_TELETEXT0, DMX_PES_SUBTITLE0 and DMX_PES_PCR0. + * The @demux function parameter contains a pointer to the demux API and + * instance data. + * The @pids function parameter contains an array with five u16 elements + * where the PIDs will be stored. + * It returns: + * 0 on success; + * -EINVAL on bad parameter. + */ +struct dmx_demux { + enum dmx_demux_caps capabilities; + struct dmx_frontend *frontend; + void *priv; + int (*open)(struct dmx_demux *demux); + int (*close)(struct dmx_demux *demux); + int (*write)(struct dmx_demux *demux, const char __user *buf, + size_t count); + int (*allocate_ts_feed)(struct dmx_demux *demux, + struct dmx_ts_feed **feed, + dmx_ts_cb callback); + int (*release_ts_feed)(struct dmx_demux *demux, + struct dmx_ts_feed *feed); + int (*allocate_section_feed)(struct dmx_demux *demux, + struct dmx_section_feed **feed, + dmx_section_cb callback); + int (*release_section_feed)(struct dmx_demux *demux, + struct dmx_section_feed *feed); + int (*add_frontend)(struct dmx_demux *demux, + struct dmx_frontend *frontend); + int (*remove_frontend)(struct dmx_demux *demux, + struct dmx_frontend *frontend); + struct list_head *(*get_frontends)(struct dmx_demux *demux); + int (*connect_frontend)(struct dmx_demux *demux, + struct dmx_frontend *frontend); + int (*disconnect_frontend)(struct dmx_demux *demux); + + int (*get_pes_pids)(struct dmx_demux *demux, u16 *pids); + + /* private: */ + + /* + * Only used at av7110, to read some data from firmware. + * As this was never documented, we have no clue about what's + * there, and its usage on other drivers aren't encouraged. + */ + int (*get_stc)(struct dmx_demux *demux, unsigned int num, + u64 *stc, unsigned int *base); +}; + +#endif /* #ifndef __DEMUX_H */ diff --git a/include/media/dmxdev.h b/include/media/dmxdev.h new file mode 100644 index 000000000..baafa3b8a --- /dev/null +++ b/include/media/dmxdev.h @@ -0,0 +1,214 @@ +/* + * dmxdev.h + * + * Copyright (C) 2000 Ralph Metzler & Marcus Metzler + * for convergence integrated media GmbH + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU Lesser General Public License + * as published by the Free Software Foundation; either version 2.1 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#ifndef _DMXDEV_H_ +#define _DMXDEV_H_ + +#include <linux/types.h> +#include <linux/spinlock.h> +#include <linux/kernel.h> +#include <linux/time.h> +#include <linux/timer.h> +#include <linux/wait.h> +#include <linux/fs.h> +#include <linux/string.h> +#include <linux/mutex.h> +#include <linux/slab.h> + +#include <linux/dvb/dmx.h> + +#include <media/dvbdev.h> +#include <media/demux.h> +#include <media/dvb_ringbuffer.h> +#include <media/dvb_vb2.h> + +/** + * enum dmxdev_type - type of demux filter type. + * + * @DMXDEV_TYPE_NONE: no filter set. + * @DMXDEV_TYPE_SEC: section filter. + * @DMXDEV_TYPE_PES: Program Elementary Stream (PES) filter. + */ +enum dmxdev_type { + DMXDEV_TYPE_NONE, + DMXDEV_TYPE_SEC, + DMXDEV_TYPE_PES, +}; + +/** + * enum dmxdev_state - state machine for the dmxdev. + * + * @DMXDEV_STATE_FREE: indicates that the filter is freed. + * @DMXDEV_STATE_ALLOCATED: indicates that the filter was allocated + * to be used. + * @DMXDEV_STATE_SET: indicates that the filter parameters are set. + * @DMXDEV_STATE_GO: indicates that the filter is running. + * @DMXDEV_STATE_DONE: indicates that a packet was already filtered + * and the filter is now disabled. + * Set only if %DMX_ONESHOT. See + * &dmx_sct_filter_params. + * @DMXDEV_STATE_TIMEDOUT: Indicates a timeout condition. + */ +enum dmxdev_state { + DMXDEV_STATE_FREE, + DMXDEV_STATE_ALLOCATED, + DMXDEV_STATE_SET, + DMXDEV_STATE_GO, + DMXDEV_STATE_DONE, + DMXDEV_STATE_TIMEDOUT +}; + +/** + * struct dmxdev_feed - digital TV dmxdev feed + * + * @pid: Program ID to be filtered + * @ts: pointer to &struct dmx_ts_feed + * @next: &struct list_head pointing to the next feed. + */ + +struct dmxdev_feed { + u16 pid; + struct dmx_ts_feed *ts; + struct list_head next; +}; + +/** + * struct dmxdev_filter - digital TV dmxdev filter + * + * @filter: a union describing a dmxdev filter. + * Currently used only for section filters. + * @filter.sec: a &struct dmx_section_filter pointer. + * For section filter only. + * @feed: a union describing a dmxdev feed. + * Depending on the filter type, it can be either + * @feed.ts or @feed.sec. + * @feed.ts: a &struct list_head list. + * For TS and PES feeds. + * @feed.sec: a &struct dmx_section_feed pointer. + * For section feed only. + * @params: a union describing dmxdev filter parameters. + * Depending on the filter type, it can be either + * @params.sec or @params.pes. + * @params.sec: a &struct dmx_sct_filter_params embedded struct. + * For section filter only. + * @params.pes: a &struct dmx_pes_filter_params embedded struct. + * For PES filter only. + * @type: type of the dmxdev filter, as defined by &enum dmxdev_type. + * @state: state of the dmxdev filter, as defined by &enum dmxdev_state. + * @dev: pointer to &struct dmxdev. + * @buffer: an embedded &struct dvb_ringbuffer buffer. + * @vb2_ctx: control struct for VB2 handler + * @mutex: protects the access to &struct dmxdev_filter. + * @timer: &struct timer_list embedded timer, used to check for + * feed timeouts. + * Only for section filter. + * @todo: index for the @secheader. + * Only for section filter. + * @secheader: buffer cache to parse the section header. + * Only for section filter. + */ +struct dmxdev_filter { + union { + struct dmx_section_filter *sec; + } filter; + + union { + /* list of TS and PES feeds (struct dmxdev_feed) */ + struct list_head ts; + struct dmx_section_feed *sec; + } feed; + + union { + struct dmx_sct_filter_params sec; + struct dmx_pes_filter_params pes; + } params; + + enum dmxdev_type type; + enum dmxdev_state state; + struct dmxdev *dev; + struct dvb_ringbuffer buffer; + struct dvb_vb2_ctx vb2_ctx; + + struct mutex mutex; + + /* only for sections */ + struct timer_list timer; + int todo; + u8 secheader[3]; +}; + +/** + * struct dmxdev - Describes a digital TV demux device. + * + * @dvbdev: pointer to &struct dvb_device associated with + * the demux device node. + * @dvr_dvbdev: pointer to &struct dvb_device associated with + * the dvr device node. + * @filter: pointer to &struct dmxdev_filter. + * @demux: pointer to &struct dmx_demux. + * @filternum: number of filters. + * @capabilities: demux capabilities as defined by &enum dmx_demux_caps. + * @may_do_mmap: flag used to indicate if the device may do mmap. + * @exit: flag to indicate that the demux is being released. + * @dvr_orig_fe: pointer to &struct dmx_frontend. + * @dvr_buffer: embedded &struct dvb_ringbuffer for DVB output. + * @dvr_vb2_ctx: control struct for VB2 handler + * @mutex: protects the usage of this structure. + * @lock: protects access to &dmxdev->filter->data. + */ +struct dmxdev { + struct dvb_device *dvbdev; + struct dvb_device *dvr_dvbdev; + + struct dmxdev_filter *filter; + struct dmx_demux *demux; + + int filternum; + int capabilities; + + unsigned int may_do_mmap:1; + unsigned int exit:1; +#define DMXDEV_CAP_DUPLEX 1 + struct dmx_frontend *dvr_orig_fe; + + struct dvb_ringbuffer dvr_buffer; +#define DVR_BUFFER_SIZE (10*188*1024) + + struct dvb_vb2_ctx dvr_vb2_ctx; + + struct mutex mutex; + spinlock_t lock; +}; + +/** + * dvb_dmxdev_init - initializes a digital TV demux and registers both demux + * and DVR devices. + * + * @dmxdev: pointer to &struct dmxdev. + * @adap: pointer to &struct dvb_adapter. + */ +int dvb_dmxdev_init(struct dmxdev *dmxdev, struct dvb_adapter *adap); + +/** + * dvb_dmxdev_release - releases a digital TV demux and unregisters it. + * + * @dmxdev: pointer to &struct dmxdev. + */ +void dvb_dmxdev_release(struct dmxdev *dmxdev); + +#endif /* _DMXDEV_H_ */ diff --git a/include/media/drv-intf/cx2341x.h b/include/media/drv-intf/cx2341x.h new file mode 100644 index 000000000..722f5905f --- /dev/null +++ b/include/media/drv-intf/cx2341x.h @@ -0,0 +1,283 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + cx23415/6/8 header containing common defines. + + */ + +#ifndef CX2341X_H +#define CX2341X_H + +#include <media/v4l2-ctrls.h> + +enum cx2341x_port { + CX2341X_PORT_MEMORY = 0, + CX2341X_PORT_STREAMING = 1, + CX2341X_PORT_SERIAL = 2 +}; + +enum cx2341x_cap { + CX2341X_CAP_HAS_SLICED_VBI = 1 << 0, + CX2341X_CAP_HAS_TS = 1 << 1, + CX2341X_CAP_HAS_AC3 = 1 << 2, +}; + +struct cx2341x_mpeg_params { + /* misc */ + u32 capabilities; + enum cx2341x_port port; + u16 width; + u16 height; + u16 is_50hz; + + /* stream */ + enum v4l2_mpeg_stream_type stream_type; + enum v4l2_mpeg_stream_vbi_fmt stream_vbi_fmt; + u16 stream_insert_nav_packets; + + /* audio */ + enum v4l2_mpeg_audio_sampling_freq audio_sampling_freq; + enum v4l2_mpeg_audio_encoding audio_encoding; + enum v4l2_mpeg_audio_l2_bitrate audio_l2_bitrate; + enum v4l2_mpeg_audio_ac3_bitrate audio_ac3_bitrate; + enum v4l2_mpeg_audio_mode audio_mode; + enum v4l2_mpeg_audio_mode_extension audio_mode_extension; + enum v4l2_mpeg_audio_emphasis audio_emphasis; + enum v4l2_mpeg_audio_crc audio_crc; + u32 audio_properties; + u16 audio_mute; + + /* video */ + enum v4l2_mpeg_video_encoding video_encoding; + enum v4l2_mpeg_video_aspect video_aspect; + u16 video_b_frames; + u16 video_gop_size; + u16 video_gop_closure; + enum v4l2_mpeg_video_bitrate_mode video_bitrate_mode; + u32 video_bitrate; + u32 video_bitrate_peak; + u16 video_temporal_decimation; + u16 video_mute; + u32 video_mute_yuv; + + /* encoding filters */ + enum v4l2_mpeg_cx2341x_video_spatial_filter_mode video_spatial_filter_mode; + u16 video_spatial_filter; + enum v4l2_mpeg_cx2341x_video_luma_spatial_filter_type video_luma_spatial_filter_type; + enum v4l2_mpeg_cx2341x_video_chroma_spatial_filter_type video_chroma_spatial_filter_type; + enum v4l2_mpeg_cx2341x_video_temporal_filter_mode video_temporal_filter_mode; + u16 video_temporal_filter; + enum v4l2_mpeg_cx2341x_video_median_filter_type video_median_filter_type; + u16 video_luma_median_filter_top; + u16 video_luma_median_filter_bottom; + u16 video_chroma_median_filter_top; + u16 video_chroma_median_filter_bottom; +}; + +#define CX2341X_MBOX_MAX_DATA 16 + +extern const u32 cx2341x_mpeg_ctrls[]; +typedef int (*cx2341x_mbox_func)(void *priv, u32 cmd, int in, int out, + u32 data[CX2341X_MBOX_MAX_DATA]); +int cx2341x_update(void *priv, cx2341x_mbox_func func, + const struct cx2341x_mpeg_params *old, + const struct cx2341x_mpeg_params *new); +int cx2341x_ctrl_query(const struct cx2341x_mpeg_params *params, + struct v4l2_queryctrl *qctrl); +const char * const *cx2341x_ctrl_get_menu(const struct cx2341x_mpeg_params *p, u32 id); +int cx2341x_ext_ctrls(struct cx2341x_mpeg_params *params, int busy, + struct v4l2_ext_controls *ctrls, unsigned int cmd); +void cx2341x_fill_defaults(struct cx2341x_mpeg_params *p); +void cx2341x_log_status(const struct cx2341x_mpeg_params *p, const char *prefix); + +struct cx2341x_handler; + +struct cx2341x_handler_ops { + /* needed for the video clock freq */ + int (*s_audio_sampling_freq)(struct cx2341x_handler *hdl, u32 val); + /* needed for dualwatch */ + int (*s_audio_mode)(struct cx2341x_handler *hdl, u32 val); + /* needed for setting up the video resolution */ + int (*s_video_encoding)(struct cx2341x_handler *hdl, u32 val); + /* needed for setting up the sliced vbi insertion data structures */ + int (*s_stream_vbi_fmt)(struct cx2341x_handler *hdl, u32 val); +}; + +struct cx2341x_handler { + u32 capabilities; + enum cx2341x_port port; + u16 width; + u16 height; + u16 is_50hz; + u32 audio_properties; + + struct v4l2_ctrl_handler hdl; + void *priv; + cx2341x_mbox_func func; + const struct cx2341x_handler_ops *ops; + + struct v4l2_ctrl *stream_vbi_fmt; + + struct { + /* audio cluster */ + struct v4l2_ctrl *audio_sampling_freq; + struct v4l2_ctrl *audio_encoding; + struct v4l2_ctrl *audio_l2_bitrate; + struct v4l2_ctrl *audio_mode; + struct v4l2_ctrl *audio_mode_extension; + struct v4l2_ctrl *audio_emphasis; + struct v4l2_ctrl *audio_crc; + struct v4l2_ctrl *audio_ac3_bitrate; + }; + + struct { + /* video gop cluster */ + struct v4l2_ctrl *video_b_frames; + struct v4l2_ctrl *video_gop_size; + }; + + struct { + /* stream type cluster */ + struct v4l2_ctrl *stream_type; + struct v4l2_ctrl *video_encoding; + struct v4l2_ctrl *video_bitrate_mode; + struct v4l2_ctrl *video_bitrate; + struct v4l2_ctrl *video_bitrate_peak; + }; + + struct { + /* video mute cluster */ + struct v4l2_ctrl *video_mute; + struct v4l2_ctrl *video_mute_yuv; + }; + + struct { + /* video filter mode cluster */ + struct v4l2_ctrl *video_spatial_filter_mode; + struct v4l2_ctrl *video_temporal_filter_mode; + struct v4l2_ctrl *video_median_filter_type; + }; + + struct { + /* video filter type cluster */ + struct v4l2_ctrl *video_luma_spatial_filter_type; + struct v4l2_ctrl *video_chroma_spatial_filter_type; + }; + + struct { + /* video filter cluster */ + struct v4l2_ctrl *video_spatial_filter; + struct v4l2_ctrl *video_temporal_filter; + }; + + struct { + /* video median cluster */ + struct v4l2_ctrl *video_luma_median_filter_top; + struct v4l2_ctrl *video_luma_median_filter_bottom; + struct v4l2_ctrl *video_chroma_median_filter_top; + struct v4l2_ctrl *video_chroma_median_filter_bottom; + }; +}; + +int cx2341x_handler_init(struct cx2341x_handler *cxhdl, + unsigned nr_of_controls_hint); +void cx2341x_handler_set_50hz(struct cx2341x_handler *cxhdl, int is_50hz); +int cx2341x_handler_setup(struct cx2341x_handler *cxhdl); +void cx2341x_handler_set_busy(struct cx2341x_handler *cxhdl, int busy); + +/* Firmware names */ +#define CX2341X_FIRM_ENC_FILENAME "v4l-cx2341x-enc.fw" +/* Decoder firmware for the cx23415 only */ +#define CX2341X_FIRM_DEC_FILENAME "v4l-cx2341x-dec.fw" + +/* Firmware API commands */ + +/* MPEG decoder API, specific to the cx23415 */ +#define CX2341X_DEC_PING_FW 0x00 +#define CX2341X_DEC_START_PLAYBACK 0x01 +#define CX2341X_DEC_STOP_PLAYBACK 0x02 +#define CX2341X_DEC_SET_PLAYBACK_SPEED 0x03 +#define CX2341X_DEC_STEP_VIDEO 0x05 +#define CX2341X_DEC_SET_DMA_BLOCK_SIZE 0x08 +#define CX2341X_DEC_GET_XFER_INFO 0x09 +#define CX2341X_DEC_GET_DMA_STATUS 0x0a +#define CX2341X_DEC_SCHED_DMA_FROM_HOST 0x0b +#define CX2341X_DEC_PAUSE_PLAYBACK 0x0d +#define CX2341X_DEC_HALT_FW 0x0e +#define CX2341X_DEC_SET_STANDARD 0x10 +#define CX2341X_DEC_GET_VERSION 0x11 +#define CX2341X_DEC_SET_STREAM_INPUT 0x14 +#define CX2341X_DEC_GET_TIMING_INFO 0x15 +#define CX2341X_DEC_SET_AUDIO_MODE 0x16 +#define CX2341X_DEC_SET_EVENT_NOTIFICATION 0x17 +#define CX2341X_DEC_SET_DISPLAY_BUFFERS 0x18 +#define CX2341X_DEC_EXTRACT_VBI 0x19 +#define CX2341X_DEC_SET_DECODER_SOURCE 0x1a +#define CX2341X_DEC_SET_PREBUFFERING 0x1e + +/* MPEG encoder API */ +#define CX2341X_ENC_PING_FW 0x80 +#define CX2341X_ENC_START_CAPTURE 0x81 +#define CX2341X_ENC_STOP_CAPTURE 0x82 +#define CX2341X_ENC_SET_AUDIO_ID 0x89 +#define CX2341X_ENC_SET_VIDEO_ID 0x8b +#define CX2341X_ENC_SET_PCR_ID 0x8d +#define CX2341X_ENC_SET_FRAME_RATE 0x8f +#define CX2341X_ENC_SET_FRAME_SIZE 0x91 +#define CX2341X_ENC_SET_BIT_RATE 0x95 +#define CX2341X_ENC_SET_GOP_PROPERTIES 0x97 +#define CX2341X_ENC_SET_ASPECT_RATIO 0x99 +#define CX2341X_ENC_SET_DNR_FILTER_MODE 0x9b +#define CX2341X_ENC_SET_DNR_FILTER_PROPS 0x9d +#define CX2341X_ENC_SET_CORING_LEVELS 0x9f +#define CX2341X_ENC_SET_SPATIAL_FILTER_TYPE 0xa1 +#define CX2341X_ENC_SET_VBI_LINE 0xb7 +#define CX2341X_ENC_SET_STREAM_TYPE 0xb9 +#define CX2341X_ENC_SET_OUTPUT_PORT 0xbb +#define CX2341X_ENC_SET_AUDIO_PROPERTIES 0xbd +#define CX2341X_ENC_HALT_FW 0xc3 +#define CX2341X_ENC_GET_VERSION 0xc4 +#define CX2341X_ENC_SET_GOP_CLOSURE 0xc5 +#define CX2341X_ENC_GET_SEQ_END 0xc6 +#define CX2341X_ENC_SET_PGM_INDEX_INFO 0xc7 +#define CX2341X_ENC_SET_VBI_CONFIG 0xc8 +#define CX2341X_ENC_SET_DMA_BLOCK_SIZE 0xc9 +#define CX2341X_ENC_GET_PREV_DMA_INFO_MB_10 0xca +#define CX2341X_ENC_GET_PREV_DMA_INFO_MB_9 0xcb +#define CX2341X_ENC_SCHED_DMA_TO_HOST 0xcc +#define CX2341X_ENC_INITIALIZE_INPUT 0xcd +#define CX2341X_ENC_SET_FRAME_DROP_RATE 0xd0 +#define CX2341X_ENC_PAUSE_ENCODER 0xd2 +#define CX2341X_ENC_REFRESH_INPUT 0xd3 +#define CX2341X_ENC_SET_COPYRIGHT 0xd4 +#define CX2341X_ENC_SET_EVENT_NOTIFICATION 0xd5 +#define CX2341X_ENC_SET_NUM_VSYNC_LINES 0xd6 +#define CX2341X_ENC_SET_PLACEHOLDER 0xd7 +#define CX2341X_ENC_MUTE_VIDEO 0xd9 +#define CX2341X_ENC_MUTE_AUDIO 0xda +#define CX2341X_ENC_SET_VERT_CROP_LINE 0xdb +#define CX2341X_ENC_MISC 0xdc + +/* OSD API, specific to the cx23415 */ +#define CX2341X_OSD_GET_FRAMEBUFFER 0x41 +#define CX2341X_OSD_GET_PIXEL_FORMAT 0x42 +#define CX2341X_OSD_SET_PIXEL_FORMAT 0x43 +#define CX2341X_OSD_GET_STATE 0x44 +#define CX2341X_OSD_SET_STATE 0x45 +#define CX2341X_OSD_GET_OSD_COORDS 0x46 +#define CX2341X_OSD_SET_OSD_COORDS 0x47 +#define CX2341X_OSD_GET_SCREEN_COORDS 0x48 +#define CX2341X_OSD_SET_SCREEN_COORDS 0x49 +#define CX2341X_OSD_GET_GLOBAL_ALPHA 0x4a +#define CX2341X_OSD_SET_GLOBAL_ALPHA 0x4b +#define CX2341X_OSD_SET_BLEND_COORDS 0x4c +#define CX2341X_OSD_GET_FLICKER_STATE 0x4f +#define CX2341X_OSD_SET_FLICKER_STATE 0x50 +#define CX2341X_OSD_BLT_COPY 0x52 +#define CX2341X_OSD_BLT_FILL 0x53 +#define CX2341X_OSD_BLT_TEXT 0x54 +#define CX2341X_OSD_SET_FRAMEBUFFER_WINDOW 0x56 +#define CX2341X_OSD_SET_CHROMA_KEY 0x60 +#define CX2341X_OSD_GET_ALPHA_CONTENT_INDEX 0x61 +#define CX2341X_OSD_SET_ALPHA_CONTENT_INDEX 0x62 + +#endif /* CX2341X_H */ diff --git a/include/media/drv-intf/cx25840.h b/include/media/drv-intf/cx25840.h new file mode 100644 index 000000000..ba69bc525 --- /dev/null +++ b/include/media/drv-intf/cx25840.h @@ -0,0 +1,262 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ + +/* + * cx25840.h - definition for cx25840/1/2/3 inputs + * + * Copyright (C) 2006 Hans Verkuil (hverkuil@xs4all.nl) + */ + +#ifndef _CX25840_H_ +#define _CX25840_H_ + +/* + * Note that the cx25840 driver requires that the bridge driver calls the + * v4l2_subdev's load_fw operation in order to load the driver's firmware. + * This will load the firmware on the first invocation (further ones are NOP). + * Without this the audio standard detection will fail and you will + * only get mono. + * Alternatively, you can call the reset operation (this can be done + * multiple times if needed, each invocation will fully reinitialize + * the device). + * + * Since loading the firmware is often problematic when the driver is + * compiled into the kernel I recommend postponing calling this function + * until the first open of the video device. Another reason for + * postponing it is that loading this firmware takes a long time (seconds) + * due to the slow i2c bus speed. So it will speed up the boot process if + * you can avoid loading the fw as long as the video device isn't used. + */ + +enum cx25840_video_input { + /* Composite video inputs In1-In8 */ + CX25840_COMPOSITE1 = 1, + CX25840_COMPOSITE2, + CX25840_COMPOSITE3, + CX25840_COMPOSITE4, + CX25840_COMPOSITE5, + CX25840_COMPOSITE6, + CX25840_COMPOSITE7, + CX25840_COMPOSITE8, + + /* + * S-Video inputs consist of one luma input (In1-In8) ORed with one + * chroma input (In5-In8) + */ + CX25840_SVIDEO_LUMA1 = 0x10, + CX25840_SVIDEO_LUMA2 = 0x20, + CX25840_SVIDEO_LUMA3 = 0x30, + CX25840_SVIDEO_LUMA4 = 0x40, + CX25840_SVIDEO_LUMA5 = 0x50, + CX25840_SVIDEO_LUMA6 = 0x60, + CX25840_SVIDEO_LUMA7 = 0x70, + CX25840_SVIDEO_LUMA8 = 0x80, + CX25840_SVIDEO_CHROMA4 = 0x400, + CX25840_SVIDEO_CHROMA5 = 0x500, + CX25840_SVIDEO_CHROMA6 = 0x600, + CX25840_SVIDEO_CHROMA7 = 0x700, + CX25840_SVIDEO_CHROMA8 = 0x800, + + /* S-Video aliases for common luma/chroma combinations */ + CX25840_SVIDEO1 = 0x510, + CX25840_SVIDEO2 = 0x620, + CX25840_SVIDEO3 = 0x730, + CX25840_SVIDEO4 = 0x840, + + /* Allow frames to specify specific input configurations */ + CX25840_VIN1_CH1 = 0x80000000, + CX25840_VIN2_CH1 = 0x80000001, + CX25840_VIN3_CH1 = 0x80000002, + CX25840_VIN4_CH1 = 0x80000003, + CX25840_VIN5_CH1 = 0x80000004, + CX25840_VIN6_CH1 = 0x80000005, + CX25840_VIN7_CH1 = 0x80000006, + CX25840_VIN8_CH1 = 0x80000007, + CX25840_VIN4_CH2 = 0x80000000, + CX25840_VIN5_CH2 = 0x80000010, + CX25840_VIN6_CH2 = 0x80000020, + CX25840_NONE_CH2 = 0x80000030, + CX25840_VIN7_CH3 = 0x80000000, + CX25840_VIN8_CH3 = 0x80000040, + CX25840_NONE0_CH3 = 0x80000080, + CX25840_NONE1_CH3 = 0x800000c0, + CX25840_SVIDEO_ON = 0x80000100, + CX25840_COMPONENT_ON = 0x80000200, + CX25840_DIF_ON = 0x80000400, +}; + +/* + * The defines below are used to set the chip video output settings + * in the generic mode that can be enabled by calling the subdevice + * init core op. + * + * The requested settings can be passed to the init core op as + * @val parameter and to the s_routing video op as @config parameter. + * + * For details please refer to the section 3.7 Video Output Formatting and + * to Video Out Control 1 to 4 registers in the section 5.6 Video Decoder Core + * of the chip datasheet. + */ +#define CX25840_VCONFIG_FMT_SHIFT 0 +#define CX25840_VCONFIG_FMT_MASK GENMASK(2, 0) +#define CX25840_VCONFIG_FMT_BT601 BIT(0) +#define CX25840_VCONFIG_FMT_BT656 BIT(1) +#define CX25840_VCONFIG_FMT_VIP11 GENMASK(1, 0) +#define CX25840_VCONFIG_FMT_VIP2 BIT(2) + +#define CX25840_VCONFIG_RES_SHIFT 3 +#define CX25840_VCONFIG_RES_MASK GENMASK(4, 3) +#define CX25840_VCONFIG_RES_8BIT BIT(3) +#define CX25840_VCONFIG_RES_10BIT BIT(4) + +#define CX25840_VCONFIG_VBIRAW_SHIFT 5 +#define CX25840_VCONFIG_VBIRAW_MASK GENMASK(6, 5) +#define CX25840_VCONFIG_VBIRAW_DISABLED BIT(5) +#define CX25840_VCONFIG_VBIRAW_ENABLED BIT(6) + +#define CX25840_VCONFIG_ANCDATA_SHIFT 7 +#define CX25840_VCONFIG_ANCDATA_MASK GENMASK(8, 7) +#define CX25840_VCONFIG_ANCDATA_DISABLED BIT(7) +#define CX25840_VCONFIG_ANCDATA_ENABLED BIT(8) + +#define CX25840_VCONFIG_TASKBIT_SHIFT 9 +#define CX25840_VCONFIG_TASKBIT_MASK GENMASK(10, 9) +#define CX25840_VCONFIG_TASKBIT_ZERO BIT(9) +#define CX25840_VCONFIG_TASKBIT_ONE BIT(10) + +#define CX25840_VCONFIG_ACTIVE_SHIFT 11 +#define CX25840_VCONFIG_ACTIVE_MASK GENMASK(12, 11) +#define CX25840_VCONFIG_ACTIVE_COMPOSITE BIT(11) +#define CX25840_VCONFIG_ACTIVE_HORIZONTAL BIT(12) + +#define CX25840_VCONFIG_VALID_SHIFT 13 +#define CX25840_VCONFIG_VALID_MASK GENMASK(14, 13) +#define CX25840_VCONFIG_VALID_NORMAL BIT(13) +#define CX25840_VCONFIG_VALID_ANDACTIVE BIT(14) + +#define CX25840_VCONFIG_HRESETW_SHIFT 15 +#define CX25840_VCONFIG_HRESETW_MASK GENMASK(16, 15) +#define CX25840_VCONFIG_HRESETW_NORMAL BIT(15) +#define CX25840_VCONFIG_HRESETW_PIXCLK BIT(16) + +#define CX25840_VCONFIG_CLKGATE_SHIFT 17 +#define CX25840_VCONFIG_CLKGATE_MASK GENMASK(18, 17) +#define CX25840_VCONFIG_CLKGATE_NONE BIT(17) +#define CX25840_VCONFIG_CLKGATE_VALID BIT(18) +#define CX25840_VCONFIG_CLKGATE_VALIDACTIVE GENMASK(18, 17) + +#define CX25840_VCONFIG_DCMODE_SHIFT 19 +#define CX25840_VCONFIG_DCMODE_MASK GENMASK(20, 19) +#define CX25840_VCONFIG_DCMODE_DWORDS BIT(19) +#define CX25840_VCONFIG_DCMODE_BYTES BIT(20) + +#define CX25840_VCONFIG_IDID0S_SHIFT 21 +#define CX25840_VCONFIG_IDID0S_MASK GENMASK(22, 21) +#define CX25840_VCONFIG_IDID0S_NORMAL BIT(21) +#define CX25840_VCONFIG_IDID0S_LINECNT BIT(22) + +#define CX25840_VCONFIG_VIPCLAMP_SHIFT 23 +#define CX25840_VCONFIG_VIPCLAMP_MASK GENMASK(24, 23) +#define CX25840_VCONFIG_VIPCLAMP_ENABLED BIT(23) +#define CX25840_VCONFIG_VIPCLAMP_DISABLED BIT(24) + +enum cx25840_audio_input { + /* Audio inputs: serial or In4-In8 */ + CX25840_AUDIO_SERIAL, + CX25840_AUDIO4 = 4, + CX25840_AUDIO5, + CX25840_AUDIO6, + CX25840_AUDIO7, + CX25840_AUDIO8, +}; + +enum cx25840_io_pin { + CX25840_PIN_DVALID_PRGM0 = 0, + CX25840_PIN_FIELD_PRGM1, + CX25840_PIN_HRESET_PRGM2, + CX25840_PIN_VRESET_HCTL_PRGM3, + CX25840_PIN_IRQ_N_PRGM4, + CX25840_PIN_IR_TX_PRGM6, + CX25840_PIN_IR_RX_PRGM5, + CX25840_PIN_GPIO0_PRGM8, + CX25840_PIN_GPIO1_PRGM9, + CX25840_PIN_SA_SDIN, /* Alternate GP Input only */ + CX25840_PIN_SA_SDOUT, /* Alternate GP Input only */ + CX25840_PIN_PLL_CLK_PRGM7, + CX25840_PIN_CHIP_SEL_VIPCLK, /* Output only */ +}; + +enum cx25840_io_pad { + /* Output pads, these must match the actual chip register values */ + CX25840_PAD_DEFAULT = 0, + CX25840_PAD_ACTIVE, + CX25840_PAD_VACTIVE, + CX25840_PAD_CBFLAG, + CX25840_PAD_VID_DATA_EXT0, + CX25840_PAD_VID_DATA_EXT1, + CX25840_PAD_GPO0, + CX25840_PAD_GPO1, + CX25840_PAD_GPO2, + CX25840_PAD_GPO3, + CX25840_PAD_IRQ_N, + CX25840_PAD_AC_SYNC, + CX25840_PAD_AC_SDOUT, + CX25840_PAD_PLL_CLK, + CX25840_PAD_VRESET, + CX25840_PAD_RESERVED, + /* Pads for PLL_CLK output only */ + CX25840_PAD_XTI_X5_DLL, + CX25840_PAD_AUX_PLL, + CX25840_PAD_VID_PLL, + CX25840_PAD_XTI, + /* Input Pads */ + CX25840_PAD_GPI0, + CX25840_PAD_GPI1, + CX25840_PAD_GPI2, + CX25840_PAD_GPI3, +}; + +enum cx25840_io_pin_strength { + CX25840_PIN_DRIVE_MEDIUM = 0, + CX25840_PIN_DRIVE_SLOW, + CX25840_PIN_DRIVE_FAST, +}; + +enum cx23885_io_pin { + CX23885_PIN_IR_RX_GPIO19, + CX23885_PIN_IR_TX_GPIO20, + CX23885_PIN_I2S_SDAT_GPIO21, + CX23885_PIN_I2S_WCLK_GPIO22, + CX23885_PIN_I2S_BCLK_GPIO23, + CX23885_PIN_IRQ_N_GPIO16, +}; + +enum cx23885_io_pad { + CX23885_PAD_IR_RX, + CX23885_PAD_GPIO19, + CX23885_PAD_IR_TX, + CX23885_PAD_GPIO20, + CX23885_PAD_I2S_SDAT, + CX23885_PAD_GPIO21, + CX23885_PAD_I2S_WCLK, + CX23885_PAD_GPIO22, + CX23885_PAD_I2S_BCLK, + CX23885_PAD_GPIO23, + CX23885_PAD_IRQ_N, + CX23885_PAD_GPIO16, +}; + +/* + * pvr150_workaround activates a workaround for a hardware bug that is + * present in Hauppauge PVR-150 (and possibly PVR-500) cards that have + * certain NTSC tuners (tveeprom tuner model numbers 85, 99 and 112). The + * audio autodetect fails on some channels for these models and the workaround + * is to select the audio standard explicitly. Many thanks to Hauppauge for + * providing this information. + * + * This platform data only needs to be supplied by the ivtv driver. + */ +struct cx25840_platform_data { + int pvr150_workaround; +}; + +#endif diff --git a/include/media/drv-intf/exynos-fimc.h b/include/media/drv-intf/exynos-fimc.h new file mode 100644 index 000000000..6b9ef631d --- /dev/null +++ b/include/media/drv-intf/exynos-fimc.h @@ -0,0 +1,157 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Samsung S5P/Exynos4 SoC series camera interface driver header + * + * Copyright (C) 2010 - 2013 Samsung Electronics Co., Ltd. + * Sylwester Nawrocki <s.nawrocki@samsung.com> + */ + +#ifndef S5P_FIMC_H_ +#define S5P_FIMC_H_ + +#include <media/media-entity.h> +#include <media/v4l2-dev.h> +#include <media/v4l2-mediabus.h> + +/* + * Enumeration of data inputs to the camera subsystem. + */ +enum fimc_input { + FIMC_INPUT_PARALLEL_0 = 1, + FIMC_INPUT_PARALLEL_1, + FIMC_INPUT_MIPI_CSI2_0 = 3, + FIMC_INPUT_MIPI_CSI2_1, + FIMC_INPUT_WRITEBACK_A = 5, + FIMC_INPUT_WRITEBACK_B, + FIMC_INPUT_WRITEBACK_ISP = 5, +}; + +/* + * Enumeration of the FIMC data bus types. + */ +enum fimc_bus_type { + /* Camera parallel bus */ + FIMC_BUS_TYPE_ITU_601 = 1, + /* Camera parallel bus with embedded synchronization */ + FIMC_BUS_TYPE_ITU_656, + /* Camera MIPI-CSI2 serial bus */ + FIMC_BUS_TYPE_MIPI_CSI2, + /* FIFO link from LCD controller (WriteBack A) */ + FIMC_BUS_TYPE_LCD_WRITEBACK_A, + /* FIFO link from LCD controller (WriteBack B) */ + FIMC_BUS_TYPE_LCD_WRITEBACK_B, + /* FIFO link from FIMC-IS */ + FIMC_BUS_TYPE_ISP_WRITEBACK = FIMC_BUS_TYPE_LCD_WRITEBACK_B, +}; + +#define fimc_input_is_parallel(x) ((x) == 1 || (x) == 2) +#define fimc_input_is_mipi_csi(x) ((x) == 3 || (x) == 4) + +/* + * The subdevices' group IDs. + */ +#define GRP_ID_SENSOR (1 << 8) +#define GRP_ID_FIMC_IS_SENSOR (1 << 9) +#define GRP_ID_WRITEBACK (1 << 10) +#define GRP_ID_CSIS (1 << 11) +#define GRP_ID_FIMC (1 << 12) +#define GRP_ID_FLITE (1 << 13) +#define GRP_ID_FIMC_IS (1 << 14) + +/** + * struct fimc_source_info - video source description required for the host + * interface configuration + * + * @fimc_bus_type: FIMC camera input type + * @sensor_bus_type: image sensor bus type, MIPI, ITU-R BT.601 etc. + * @flags: the parallel sensor bus flags defining signals polarity (V4L2_MBUS_*) + * @mux_id: FIMC camera interface multiplexer index (separate for MIPI and ITU) + */ +struct fimc_source_info { + enum fimc_bus_type fimc_bus_type; + enum fimc_bus_type sensor_bus_type; + u16 flags; + u16 mux_id; +}; + +/* + * v4l2_device notification id. This is only for internal use in the kernel. + * Sensor subdevs should issue S5P_FIMC_TX_END_NOTIFY notification in single + * frame capture mode when there is only one VSYNC pulse issued by the sensor + * at beginning of the frame transmission. + */ +#define S5P_FIMC_TX_END_NOTIFY _IO('e', 0) + +#define FIMC_MAX_PLANES 3 + +/** + * struct fimc_fmt - color format data structure + * @mbus_code: media bus pixel code, -1 if not applicable + * @fourcc: fourcc code for this format, 0 if not applicable + * @color: the driver's private color format id + * @memplanes: number of physically non-contiguous data planes + * @colplanes: number of physically contiguous data planes + * @colorspace: v4l2 colorspace (V4L2_COLORSPACE_*) + * @depth: per plane driver's private 'number of bits per pixel' + * @mdataplanes: bitmask indicating meta data plane(s), (1 << plane_no) + * @flags: flags indicating which operation mode format applies to + */ +struct fimc_fmt { + u32 mbus_code; + u32 fourcc; + u32 color; + u16 memplanes; + u16 colplanes; + u8 colorspace; + u8 depth[FIMC_MAX_PLANES]; + u16 mdataplanes; + u16 flags; +#define FMT_FLAGS_CAM (1 << 0) +#define FMT_FLAGS_M2M_IN (1 << 1) +#define FMT_FLAGS_M2M_OUT (1 << 2) +#define FMT_FLAGS_M2M (1 << 1 | 1 << 2) +#define FMT_HAS_ALPHA (1 << 3) +#define FMT_FLAGS_COMPRESSED (1 << 4) +#define FMT_FLAGS_WRITEBACK (1 << 5) +#define FMT_FLAGS_RAW_BAYER (1 << 6) +#define FMT_FLAGS_YUV (1 << 7) +}; + +struct exynos_media_pipeline; + +/* + * Media pipeline operations to be called from within a video node, i.e. the + * last entity within the pipeline. Implemented by related media device driver. + */ +struct exynos_media_pipeline_ops { + int (*prepare)(struct exynos_media_pipeline *p, + struct media_entity *me); + int (*unprepare)(struct exynos_media_pipeline *p); + int (*open)(struct exynos_media_pipeline *p, struct media_entity *me, + bool resume); + int (*close)(struct exynos_media_pipeline *p); + int (*set_stream)(struct exynos_media_pipeline *p, bool state); +}; + +struct exynos_video_entity { + struct video_device vdev; + struct exynos_media_pipeline *pipe; +}; + +struct exynos_media_pipeline { + struct media_pipeline mp; + const struct exynos_media_pipeline_ops *ops; +}; + +static inline struct exynos_video_entity *vdev_to_exynos_video_entity( + struct video_device *vdev) +{ + return container_of(vdev, struct exynos_video_entity, vdev); +} + +#define fimc_pipeline_call(ent, op, args...) \ + ((!(ent) || !(ent)->pipe) ? -ENOENT : \ + (((ent)->pipe->ops && (ent)->pipe->ops->op) ? \ + (ent)->pipe->ops->op(((ent)->pipe), ##args) : -ENOIOCTLCMD)) \ + +#endif /* S5P_FIMC_H_ */ diff --git a/include/media/drv-intf/msp3400.h b/include/media/drv-intf/msp3400.h new file mode 100644 index 000000000..d6dfae104 --- /dev/null +++ b/include/media/drv-intf/msp3400.h @@ -0,0 +1,213 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + msp3400.h - definition for msp3400 inputs and outputs + + Copyright (C) 2006 Hans Verkuil (hverkuil@xs4all.nl) + +*/ + +#ifndef _MSP3400_H_ +#define _MSP3400_H_ + +/* msp3400 routing + =============== + + The msp3400 has a complicated routing scheme with many possible + combinations. The details are all in the datasheets but I will try + to give a short description here. + + Inputs + ====== + + There are 1) tuner inputs, 2) I2S inputs, 3) SCART inputs. You will have + to select which tuner input to use and which SCART input to use. The + selected tuner input, the selected SCART input and all I2S inputs go to + the DSP (the tuner input first goes through the demodulator). + + The DSP handles things like volume, bass/treble, balance, and some chips + have support for surround sound. It has several outputs: MAIN, AUX, I2S + and SCART1/2. Each output can select which DSP input to use. So the MAIN + output can select the tuner input while at the same time the SCART1 output + uses the I2S input. + + Outputs + ======= + + Most DSP outputs are also the outputs of the msp3400. However, the SCART + outputs of the msp3400 can select which input to use: either the SCART1 or + SCART2 output from the DSP, or the msp3400 SCART inputs, thus completely + bypassing the DSP. + + Summary + ======= + + So to specify a complete routing scheme for the msp3400 you will have to + specify in the 'input' arg of the s_routing function: + + 1) which tuner input to use + 2) which SCART input to use + 3) which DSP input to use for each DSP output + + And in the 'output' arg of the s_routing function you specify: + + 1) which SCART input to use for each SCART output + + Depending on how the msp is wired to the other components you can + ignore or mute certain inputs or outputs. + + Also, depending on the msp version only a subset of the inputs or + outputs may be present. At the end of this header some tables are + added containing a list of what is available for each msp version. + */ + +/* Inputs to the DSP unit: two independent selections have to be made: + 1) the tuner (SIF) input + 2) the SCART input + Bits 0-2 are used for the SCART input select, bit 3 is used for the tuner + input, bits 4-7 are reserved. + */ + +/* SCART input to DSP selection */ +#define MSP_IN_SCART1 0 /* Pin SC1_IN */ +#define MSP_IN_SCART2 1 /* Pin SC2_IN */ +#define MSP_IN_SCART3 2 /* Pin SC3_IN */ +#define MSP_IN_SCART4 3 /* Pin SC4_IN */ +#define MSP_IN_MONO 6 /* Pin MONO_IN */ +#define MSP_IN_MUTE 7 /* Mute DSP input */ +#define MSP_SCART_TO_DSP(in) (in) +/* Tuner input to demodulator and DSP selection */ +#define MSP_IN_TUNER1 0 /* Analog Sound IF input pin ANA_IN1 */ +#define MSP_IN_TUNER2 1 /* Analog Sound IF input pin ANA_IN2 */ +#define MSP_TUNER_TO_DSP(in) ((in) << 3) + +/* The msp has up to 5 DSP outputs, each output can independently select + a DSP input. + + The DSP outputs are: loudspeaker output (aka MAIN), headphones output + (aka AUX), SCART1 DA output, SCART2 DA output and an I2S output. + There also is a quasi-peak detector output, but that is not used by + this driver and is set to the same input as the loudspeaker output. + Not all outputs are supported by all msp models. Setting the input + of an unsupported output will be ignored by the driver. + + There are up to 16 DSP inputs to choose from, so each output is + assigned 4 bits. + + Note: the 44x8G can mix two inputs and feed the result back to the + DSP. This is currently not implemented. Also not implemented is the + multi-channel capable I2S3 input of the 44x0G. If someone can demonstrate + a need for one of those features then additional support can be added. */ +#define MSP_DSP_IN_TUNER 0 /* Tuner DSP input */ +#define MSP_DSP_IN_SCART 2 /* SCART DSP input */ +#define MSP_DSP_IN_I2S1 5 /* I2S1 DSP input */ +#define MSP_DSP_IN_I2S2 6 /* I2S2 DSP input */ +#define MSP_DSP_IN_I2S3 7 /* I2S3 DSP input */ +#define MSP_DSP_IN_MAIN_AVC 11 /* MAIN AVC processed DSP input */ +#define MSP_DSP_IN_MAIN 12 /* MAIN DSP input */ +#define MSP_DSP_IN_AUX 13 /* AUX DSP input */ +#define MSP_DSP_TO_MAIN(in) ((in) << 4) +#define MSP_DSP_TO_AUX(in) ((in) << 8) +#define MSP_DSP_TO_SCART1(in) ((in) << 12) +#define MSP_DSP_TO_SCART2(in) ((in) << 16) +#define MSP_DSP_TO_I2S(in) ((in) << 20) + +/* Output SCART select: the SCART outputs can select which input + to use. */ +#define MSP_SC_IN_SCART1 0 /* SCART1 input, bypassing the DSP */ +#define MSP_SC_IN_SCART2 1 /* SCART2 input, bypassing the DSP */ +#define MSP_SC_IN_SCART3 2 /* SCART3 input, bypassing the DSP */ +#define MSP_SC_IN_SCART4 3 /* SCART4 input, bypassing the DSP */ +#define MSP_SC_IN_DSP_SCART1 4 /* DSP SCART1 input */ +#define MSP_SC_IN_DSP_SCART2 5 /* DSP SCART2 input */ +#define MSP_SC_IN_MONO 6 /* MONO input, bypassing the DSP */ +#define MSP_SC_IN_MUTE 7 /* MUTE output */ +#define MSP_SC_TO_SCART1(in) (in) +#define MSP_SC_TO_SCART2(in) ((in) << 4) + +/* Shortcut macros */ +#define MSP_INPUT(sc, t, main_aux_src, sc_i2s_src) \ + (MSP_SCART_TO_DSP(sc) | \ + MSP_TUNER_TO_DSP(t) | \ + MSP_DSP_TO_MAIN(main_aux_src) | \ + MSP_DSP_TO_AUX(main_aux_src) | \ + MSP_DSP_TO_SCART1(sc_i2s_src) | \ + MSP_DSP_TO_SCART2(sc_i2s_src) | \ + MSP_DSP_TO_I2S(sc_i2s_src)) +#define MSP_INPUT_DEFAULT MSP_INPUT(MSP_IN_SCART1, MSP_IN_TUNER1, \ + MSP_DSP_IN_TUNER, MSP_DSP_IN_TUNER) +#define MSP_OUTPUT(sc) \ + (MSP_SC_TO_SCART1(sc) | \ + MSP_SC_TO_SCART2(sc)) +/* This equals the RESET position of the msp3400 ACB register */ +#define MSP_OUTPUT_DEFAULT (MSP_SC_TO_SCART1(MSP_SC_IN_SCART3) | \ + MSP_SC_TO_SCART2(MSP_SC_IN_DSP_SCART1)) + +/* Tuner inputs vs. msp version */ +/* Chip TUNER_1 TUNER_2 + ------------------------- + msp34x0b y y + msp34x0c y y + msp34x0d y y + msp34x5d y n + msp34x7d y n + msp34x0g y y + msp34x1g y y + msp34x2g y y + msp34x5g y n + msp34x7g y n + msp44x0g y y + msp44x8g y y + */ + +/* SCART inputs vs. msp version */ +/* Chip SC1 SC2 SC3 SC4 + ------------------------- + msp34x0b y y y n + msp34x0c y y y n + msp34x0d y y y y + msp34x5d y y n n + msp34x7d y n n n + msp34x0g y y y y + msp34x1g y y y y + msp34x2g y y y y + msp34x5g y y n n + msp34x7g y n n n + msp44x0g y y y y + msp44x8g y y y y + */ + +/* DSP inputs vs. msp version (tuner and SCART inputs are always available) */ +/* Chip I2S1 I2S2 I2S3 MAIN_AVC MAIN AUX + ------------------------------------------ + msp34x0b y n n n n n + msp34x0c y y n n n n + msp34x0d y y n n n n + msp34x5d y y n n n n + msp34x7d n n n n n n + msp34x0g y y n n n n + msp34x1g y y n n n n + msp34x2g y y n y y y + msp34x5g y y n n n n + msp34x7g n n n n n n + msp44x0g y y y y y y + msp44x8g y y y n n n + */ + +/* DSP outputs vs. msp version */ +/* Chip MAIN AUX SCART1 SCART2 I2S + ------------------------------------ + msp34x0b y y y n y + msp34x0c y y y n y + msp34x0d y y y y y + msp34x5d y n y n y + msp34x7d y n y n n + msp34x0g y y y y y + msp34x1g y y y y y + msp34x2g y y y y y + msp34x5g y n y n y + msp34x7g y n y n n + msp44x0g y y y y y + msp44x8g y y y y y + */ + +#endif /* MSP3400_H */ diff --git a/include/media/drv-intf/renesas-ceu.h b/include/media/drv-intf/renesas-ceu.h new file mode 100644 index 000000000..52841d1b4 --- /dev/null +++ b/include/media/drv-intf/renesas-ceu.h @@ -0,0 +1,26 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * renesas-ceu.h - Renesas CEU driver interface + * + * Copyright 2017-2018 Jacopo Mondi <jacopo+renesas@jmondi.org> + */ + +#ifndef __MEDIA_DRV_INTF_RENESAS_CEU_H__ +#define __MEDIA_DRV_INTF_RENESAS_CEU_H__ + +#define CEU_MAX_SUBDEVS 2 + +struct ceu_async_subdev { + unsigned long flags; + unsigned char bus_width; + unsigned char bus_shift; + unsigned int i2c_adapter_id; + unsigned int i2c_address; +}; + +struct ceu_platform_data { + unsigned int num_subdevs; + struct ceu_async_subdev subdevs[CEU_MAX_SUBDEVS]; +}; + +#endif /* ___MEDIA_DRV_INTF_RENESAS_CEU_H__ */ diff --git a/include/media/drv-intf/s3c_camif.h b/include/media/drv-intf/s3c_camif.h new file mode 100644 index 000000000..f746851a5 --- /dev/null +++ b/include/media/drv-intf/s3c_camif.h @@ -0,0 +1,38 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * s3c24xx/s3c64xx SoC series Camera Interface (CAMIF) driver + * + * Copyright (C) 2012 Sylwester Nawrocki <sylvester.nawrocki@gmail.com> +*/ + +#ifndef MEDIA_S3C_CAMIF_ +#define MEDIA_S3C_CAMIF_ + +#include <linux/i2c.h> +#include <media/v4l2-mediabus.h> + +/** + * struct s3c_camif_sensor_info - an image sensor description + * @i2c_board_info: pointer to an I2C sensor subdevice board info + * @clock_frequency: frequency of the clock the host provides to a sensor + * @mbus_type: media bus type + * @i2c_bus_num: i2c control bus id the sensor is attached to + * @flags: the parallel bus flags defining signals polarity (V4L2_MBUS_*) + * @use_field: 1 if parallel bus FIELD signal is used (only s3c64xx) + */ +struct s3c_camif_sensor_info { + struct i2c_board_info i2c_board_info; + unsigned long clock_frequency; + enum v4l2_mbus_type mbus_type; + u16 i2c_bus_num; + u16 flags; + u8 use_field; +}; + +struct s3c_camif_plat_data { + struct s3c_camif_sensor_info sensor; + int (*gpio_get)(void); + int (*gpio_put)(void); +}; + +#endif /* MEDIA_S3C_CAMIF_ */ diff --git a/include/media/drv-intf/saa7146.h b/include/media/drv-intf/saa7146.h new file mode 100644 index 000000000..71ce63c99 --- /dev/null +++ b/include/media/drv-intf/saa7146.h @@ -0,0 +1,472 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef __SAA7146__ +#define __SAA7146__ + +#include <linux/delay.h> /* for delay-stuff */ +#include <linux/slab.h> /* for kmalloc/kfree */ +#include <linux/pci.h> /* for pci-config-stuff, vendor ids etc. */ +#include <linux/init.h> /* for "__init" */ +#include <linux/interrupt.h> /* for IMMEDIATE_BH */ +#include <linux/kmod.h> /* for kernel module loader */ +#include <linux/i2c.h> /* for i2c subsystem */ +#include <asm/io.h> /* for accessing devices */ +#include <linux/stringify.h> +#include <linux/mutex.h> +#include <linux/scatterlist.h> +#include <media/v4l2-device.h> +#include <media/v4l2-ctrls.h> + +#include <linux/vmalloc.h> /* for vmalloc() */ +#include <linux/mm.h> /* for vmalloc_to_page() */ + +#define saa7146_write(sxy,adr,dat) writel((dat),(sxy->mem+(adr))) +#define saa7146_read(sxy,adr) readl(sxy->mem+(adr)) + +extern unsigned int saa7146_debug; + +#ifndef DEBUG_VARIABLE + #define DEBUG_VARIABLE saa7146_debug +#endif + +#define ERR(fmt, ...) pr_err("%s: " fmt, __func__, ##__VA_ARGS__) + +#define _DBG(mask, fmt, ...) \ +do { \ + if (DEBUG_VARIABLE & mask) \ + pr_debug("%s(): " fmt, __func__, ##__VA_ARGS__); \ +} while (0) + +/* simple debug messages */ +#define DEB_S(fmt, ...) _DBG(0x01, fmt, ##__VA_ARGS__) +/* more detailed debug messages */ +#define DEB_D(fmt, ...) _DBG(0x02, fmt, ##__VA_ARGS__) +/* print enter and exit of functions */ +#define DEB_EE(fmt, ...) _DBG(0x04, fmt, ##__VA_ARGS__) +/* i2c debug messages */ +#define DEB_I2C(fmt, ...) _DBG(0x08, fmt, ##__VA_ARGS__) +/* vbi debug messages */ +#define DEB_VBI(fmt, ...) _DBG(0x10, fmt, ##__VA_ARGS__) +/* interrupt debug messages */ +#define DEB_INT(fmt, ...) _DBG(0x20, fmt, ##__VA_ARGS__) +/* capture debug messages */ +#define DEB_CAP(fmt, ...) _DBG(0x40, fmt, ##__VA_ARGS__) + +#define SAA7146_ISR_CLEAR(x,y) \ + saa7146_write(x, ISR, (y)); + +struct module; + +struct saa7146_dev; +struct saa7146_extension; +struct saa7146_vv; + +/* saa7146 page table */ +struct saa7146_pgtable { + unsigned int size; + __le32 *cpu; + dma_addr_t dma; + /* used for offsets for u,v planes for planar capture modes */ + unsigned long offset; + /* used for custom pagetables (used for example by budget dvb cards) */ + struct scatterlist *slist; + int nents; +}; + +struct saa7146_pci_extension_data { + struct saa7146_extension *ext; + void *ext_priv; /* most likely a name string */ +}; + +#define MAKE_EXTENSION_PCI(x_var, x_vendor, x_device) \ + { \ + .vendor = PCI_VENDOR_ID_PHILIPS, \ + .device = PCI_DEVICE_ID_PHILIPS_SAA7146, \ + .subvendor = x_vendor, \ + .subdevice = x_device, \ + .driver_data = (unsigned long)& x_var, \ + } + +struct saa7146_extension +{ + char name[32]; /* name of the device */ +#define SAA7146_USE_I2C_IRQ 0x1 +#define SAA7146_I2C_SHORT_DELAY 0x2 + int flags; + + /* pairs of subvendor and subdevice ids for + supported devices, last entry 0xffff, 0xfff */ + struct module *module; + struct pci_driver driver; + const struct pci_device_id *pci_tbl; + + /* extension functions */ + int (*probe)(struct saa7146_dev *); + int (*attach)(struct saa7146_dev *, struct saa7146_pci_extension_data *); + int (*detach)(struct saa7146_dev*); + + u32 irq_mask; /* mask to indicate, which irq-events are handled by the extension */ + void (*irq_func)(struct saa7146_dev*, u32* irq_mask); +}; + +struct saa7146_dma +{ + dma_addr_t dma_handle; + __le32 *cpu_addr; +}; + +struct saa7146_dev +{ + struct module *module; + + struct v4l2_device v4l2_dev; + struct v4l2_ctrl_handler ctrl_handler; + + /* different device locks */ + spinlock_t slock; + struct mutex v4l2_lock; + + unsigned char __iomem *mem; /* pointer to mapped IO memory */ + u32 revision; /* chip revision; needed for bug-workarounds*/ + + /* pci-device & irq stuff*/ + char name[32]; + struct pci_dev *pci; + u32 int_todo; + spinlock_t int_slock; + + /* extension handling */ + struct saa7146_extension *ext; /* indicates if handled by extension */ + void *ext_priv; /* pointer for extension private use (most likely some private data) */ + struct saa7146_ext_vv *ext_vv_data; + + /* per device video/vbi information (if available) */ + struct saa7146_vv *vv_data; + void (*vv_callback)(struct saa7146_dev *dev, unsigned long status); + + /* i2c-stuff */ + struct mutex i2c_lock; + + u32 i2c_bitrate; + struct saa7146_dma d_i2c; /* pointer to i2c memory */ + wait_queue_head_t i2c_wq; + int i2c_op; + + /* memories */ + struct saa7146_dma d_rps0; + struct saa7146_dma d_rps1; +}; + +static inline struct saa7146_dev *to_saa7146_dev(struct v4l2_device *v4l2_dev) +{ + return container_of(v4l2_dev, struct saa7146_dev, v4l2_dev); +} + +/* from saa7146_i2c.c */ +int saa7146_i2c_adapter_prepare(struct saa7146_dev *dev, struct i2c_adapter *i2c_adapter, u32 bitrate); + +/* from saa7146_core.c */ +int saa7146_register_extension(struct saa7146_extension*); +int saa7146_unregister_extension(struct saa7146_extension*); +struct saa7146_format* saa7146_format_by_fourcc(struct saa7146_dev *dev, int fourcc); +int saa7146_pgtable_alloc(struct pci_dev *pci, struct saa7146_pgtable *pt); +void saa7146_pgtable_free(struct pci_dev *pci, struct saa7146_pgtable *pt); +int saa7146_pgtable_build_single(struct pci_dev *pci, struct saa7146_pgtable *pt, struct scatterlist *list, int length ); +void *saa7146_vmalloc_build_pgtable(struct pci_dev *pci, long length, struct saa7146_pgtable *pt); +void saa7146_vfree_destroy_pgtable(struct pci_dev *pci, void *mem, struct saa7146_pgtable *pt); +void saa7146_setgpio(struct saa7146_dev *dev, int port, u32 data); +int saa7146_wait_for_debi_done(struct saa7146_dev *dev, int nobusyloop); + +/* some memory sizes */ +#define SAA7146_I2C_MEM ( 1*PAGE_SIZE) +#define SAA7146_RPS_MEM ( 1*PAGE_SIZE) + +/* some i2c constants */ +#define SAA7146_I2C_TIMEOUT 100 /* i2c-timeout-value in ms */ +#define SAA7146_I2C_RETRIES 3 /* how many times shall we retry an i2c-operation? */ +#define SAA7146_I2C_DELAY 5 /* time we wait after certain i2c-operations */ + +/* unsorted defines */ +#define ME1 0x0000000800 +#define PV1 0x0000000008 + +/* gpio defines */ +#define SAA7146_GPIO_INPUT 0x00 +#define SAA7146_GPIO_IRQHI 0x10 +#define SAA7146_GPIO_IRQLO 0x20 +#define SAA7146_GPIO_IRQHL 0x30 +#define SAA7146_GPIO_OUTLO 0x40 +#define SAA7146_GPIO_OUTHI 0x50 + +/* debi defines */ +#define DEBINOSWAP 0x000e0000 + +/* define for the register programming sequencer (rps) */ +#define CMD_NOP 0x00000000 /* No operation */ +#define CMD_CLR_EVENT 0x00000000 /* Clear event */ +#define CMD_SET_EVENT 0x10000000 /* Set signal event */ +#define CMD_PAUSE 0x20000000 /* Pause */ +#define CMD_CHECK_LATE 0x30000000 /* Check late */ +#define CMD_UPLOAD 0x40000000 /* Upload */ +#define CMD_STOP 0x50000000 /* Stop */ +#define CMD_INTERRUPT 0x60000000 /* Interrupt */ +#define CMD_JUMP 0x80000000 /* Jump */ +#define CMD_WR_REG 0x90000000 /* Write (load) register */ +#define CMD_RD_REG 0xa0000000 /* Read (store) register */ +#define CMD_WR_REG_MASK 0xc0000000 /* Write register with mask */ + +#define CMD_OAN MASK_27 +#define CMD_INV MASK_26 +#define CMD_SIG4 MASK_25 +#define CMD_SIG3 MASK_24 +#define CMD_SIG2 MASK_23 +#define CMD_SIG1 MASK_22 +#define CMD_SIG0 MASK_21 +#define CMD_O_FID_B MASK_14 +#define CMD_E_FID_B MASK_13 +#define CMD_O_FID_A MASK_12 +#define CMD_E_FID_A MASK_11 + +/* some events and command modifiers for rps1 squarewave generator */ +#define EVT_HS (1<<15) // Source Line Threshold reached +#define EVT_VBI_B (1<<9) // VSYNC Event +#define RPS_OAN (1<<27) // 1: OR events, 0: AND events +#define RPS_INV (1<<26) // Invert (compound) event +#define GPIO3_MSK 0xFF000000 // GPIO #3 control bits + +/* Bit mask constants */ +#define MASK_00 0x00000001 /* Mask value for bit 0 */ +#define MASK_01 0x00000002 /* Mask value for bit 1 */ +#define MASK_02 0x00000004 /* Mask value for bit 2 */ +#define MASK_03 0x00000008 /* Mask value for bit 3 */ +#define MASK_04 0x00000010 /* Mask value for bit 4 */ +#define MASK_05 0x00000020 /* Mask value for bit 5 */ +#define MASK_06 0x00000040 /* Mask value for bit 6 */ +#define MASK_07 0x00000080 /* Mask value for bit 7 */ +#define MASK_08 0x00000100 /* Mask value for bit 8 */ +#define MASK_09 0x00000200 /* Mask value for bit 9 */ +#define MASK_10 0x00000400 /* Mask value for bit 10 */ +#define MASK_11 0x00000800 /* Mask value for bit 11 */ +#define MASK_12 0x00001000 /* Mask value for bit 12 */ +#define MASK_13 0x00002000 /* Mask value for bit 13 */ +#define MASK_14 0x00004000 /* Mask value for bit 14 */ +#define MASK_15 0x00008000 /* Mask value for bit 15 */ +#define MASK_16 0x00010000 /* Mask value for bit 16 */ +#define MASK_17 0x00020000 /* Mask value for bit 17 */ +#define MASK_18 0x00040000 /* Mask value for bit 18 */ +#define MASK_19 0x00080000 /* Mask value for bit 19 */ +#define MASK_20 0x00100000 /* Mask value for bit 20 */ +#define MASK_21 0x00200000 /* Mask value for bit 21 */ +#define MASK_22 0x00400000 /* Mask value for bit 22 */ +#define MASK_23 0x00800000 /* Mask value for bit 23 */ +#define MASK_24 0x01000000 /* Mask value for bit 24 */ +#define MASK_25 0x02000000 /* Mask value for bit 25 */ +#define MASK_26 0x04000000 /* Mask value for bit 26 */ +#define MASK_27 0x08000000 /* Mask value for bit 27 */ +#define MASK_28 0x10000000 /* Mask value for bit 28 */ +#define MASK_29 0x20000000 /* Mask value for bit 29 */ +#define MASK_30 0x40000000 /* Mask value for bit 30 */ +#define MASK_31 0x80000000 /* Mask value for bit 31 */ + +#define MASK_B0 0x000000ff /* Mask value for byte 0 */ +#define MASK_B1 0x0000ff00 /* Mask value for byte 1 */ +#define MASK_B2 0x00ff0000 /* Mask value for byte 2 */ +#define MASK_B3 0xff000000 /* Mask value for byte 3 */ + +#define MASK_W0 0x0000ffff /* Mask value for word 0 */ +#define MASK_W1 0xffff0000 /* Mask value for word 1 */ + +#define MASK_PA 0xfffffffc /* Mask value for physical address */ +#define MASK_PR 0xfffffffe /* Mask value for protection register */ +#define MASK_ER 0xffffffff /* Mask value for the entire register */ + +#define MASK_NONE 0x00000000 /* No mask */ + +/* register aliases */ +#define BASE_ODD1 0x00 /* Video DMA 1 registers */ +#define BASE_EVEN1 0x04 +#define PROT_ADDR1 0x08 +#define PITCH1 0x0C +#define BASE_PAGE1 0x10 /* Video DMA 1 base page */ +#define NUM_LINE_BYTE1 0x14 + +#define BASE_ODD2 0x18 /* Video DMA 2 registers */ +#define BASE_EVEN2 0x1C +#define PROT_ADDR2 0x20 +#define PITCH2 0x24 +#define BASE_PAGE2 0x28 /* Video DMA 2 base page */ +#define NUM_LINE_BYTE2 0x2C + +#define BASE_ODD3 0x30 /* Video DMA 3 registers */ +#define BASE_EVEN3 0x34 +#define PROT_ADDR3 0x38 +#define PITCH3 0x3C +#define BASE_PAGE3 0x40 /* Video DMA 3 base page */ +#define NUM_LINE_BYTE3 0x44 + +#define PCI_BT_V1 0x48 /* Video/FIFO 1 */ +#define PCI_BT_V2 0x49 /* Video/FIFO 2 */ +#define PCI_BT_V3 0x4A /* Video/FIFO 3 */ +#define PCI_BT_DEBI 0x4B /* DEBI */ +#define PCI_BT_A 0x4C /* Audio */ + +#define DD1_INIT 0x50 /* Init setting of DD1 interface */ + +#define DD1_STREAM_B 0x54 /* DD1 B video data stream handling */ +#define DD1_STREAM_A 0x56 /* DD1 A video data stream handling */ + +#define BRS_CTRL 0x58 /* BRS control register */ +#define HPS_CTRL 0x5C /* HPS control register */ +#define HPS_V_SCALE 0x60 /* HPS vertical scale */ +#define HPS_V_GAIN 0x64 /* HPS vertical ACL and gain */ +#define HPS_H_PRESCALE 0x68 /* HPS horizontal prescale */ +#define HPS_H_SCALE 0x6C /* HPS horizontal scale */ +#define BCS_CTRL 0x70 /* BCS control */ +#define CHROMA_KEY_RANGE 0x74 +#define CLIP_FORMAT_CTRL 0x78 /* HPS outputs formats & clipping */ + +#define DEBI_CONFIG 0x7C +#define DEBI_COMMAND 0x80 +#define DEBI_PAGE 0x84 +#define DEBI_AD 0x88 + +#define I2C_TRANSFER 0x8C +#define I2C_STATUS 0x90 + +#define BASE_A1_IN 0x94 /* Audio 1 input DMA */ +#define PROT_A1_IN 0x98 +#define PAGE_A1_IN 0x9C + +#define BASE_A1_OUT 0xA0 /* Audio 1 output DMA */ +#define PROT_A1_OUT 0xA4 +#define PAGE_A1_OUT 0xA8 + +#define BASE_A2_IN 0xAC /* Audio 2 input DMA */ +#define PROT_A2_IN 0xB0 +#define PAGE_A2_IN 0xB4 + +#define BASE_A2_OUT 0xB8 /* Audio 2 output DMA */ +#define PROT_A2_OUT 0xBC +#define PAGE_A2_OUT 0xC0 + +#define RPS_PAGE0 0xC4 /* RPS task 0 page register */ +#define RPS_PAGE1 0xC8 /* RPS task 1 page register */ + +#define RPS_THRESH0 0xCC /* HBI threshold for task 0 */ +#define RPS_THRESH1 0xD0 /* HBI threshold for task 1 */ + +#define RPS_TOV0 0xD4 /* RPS timeout for task 0 */ +#define RPS_TOV1 0xD8 /* RPS timeout for task 1 */ + +#define IER 0xDC /* Interrupt enable register */ + +#define GPIO_CTRL 0xE0 /* GPIO 0-3 register */ + +#define EC1SSR 0xE4 /* Event cnt set 1 source select */ +#define EC2SSR 0xE8 /* Event cnt set 2 source select */ +#define ECT1R 0xEC /* Event cnt set 1 thresholds */ +#define ECT2R 0xF0 /* Event cnt set 2 thresholds */ + +#define ACON1 0xF4 +#define ACON2 0xF8 + +#define MC1 0xFC /* Main control register 1 */ +#define MC2 0x100 /* Main control register 2 */ + +#define RPS_ADDR0 0x104 /* RPS task 0 address register */ +#define RPS_ADDR1 0x108 /* RPS task 1 address register */ + +#define ISR 0x10C /* Interrupt status register */ +#define PSR 0x110 /* Primary status register */ +#define SSR 0x114 /* Secondary status register */ + +#define EC1R 0x118 /* Event counter set 1 register */ +#define EC2R 0x11C /* Event counter set 2 register */ + +#define PCI_VDP1 0x120 /* Video DMA pointer of FIFO 1 */ +#define PCI_VDP2 0x124 /* Video DMA pointer of FIFO 2 */ +#define PCI_VDP3 0x128 /* Video DMA pointer of FIFO 3 */ +#define PCI_ADP1 0x12C /* Audio DMA pointer of audio out 1 */ +#define PCI_ADP2 0x130 /* Audio DMA pointer of audio in 1 */ +#define PCI_ADP3 0x134 /* Audio DMA pointer of audio out 2 */ +#define PCI_ADP4 0x138 /* Audio DMA pointer of audio in 2 */ +#define PCI_DMA_DDP 0x13C /* DEBI DMA pointer */ + +#define LEVEL_REP 0x140, +#define A_TIME_SLOT1 0x180, /* from 180 - 1BC */ +#define A_TIME_SLOT2 0x1C0, /* from 1C0 - 1FC */ + +/* isr masks */ +#define SPCI_PPEF 0x80000000 /* PCI parity error */ +#define SPCI_PABO 0x40000000 /* PCI access error (target or master abort) */ +#define SPCI_PPED 0x20000000 /* PCI parity error on 'real time data' */ +#define SPCI_RPS_I1 0x10000000 /* Interrupt issued by RPS1 */ +#define SPCI_RPS_I0 0x08000000 /* Interrupt issued by RPS0 */ +#define SPCI_RPS_LATE1 0x04000000 /* RPS task 1 is late */ +#define SPCI_RPS_LATE0 0x02000000 /* RPS task 0 is late */ +#define SPCI_RPS_E1 0x01000000 /* RPS error from task 1 */ +#define SPCI_RPS_E0 0x00800000 /* RPS error from task 0 */ +#define SPCI_RPS_TO1 0x00400000 /* RPS timeout task 1 */ +#define SPCI_RPS_TO0 0x00200000 /* RPS timeout task 0 */ +#define SPCI_UPLD 0x00100000 /* RPS in upload */ +#define SPCI_DEBI_S 0x00080000 /* DEBI status */ +#define SPCI_DEBI_E 0x00040000 /* DEBI error */ +#define SPCI_IIC_S 0x00020000 /* I2C status */ +#define SPCI_IIC_E 0x00010000 /* I2C error */ +#define SPCI_A2_IN 0x00008000 /* Audio 2 input DMA protection / limit */ +#define SPCI_A2_OUT 0x00004000 /* Audio 2 output DMA protection / limit */ +#define SPCI_A1_IN 0x00002000 /* Audio 1 input DMA protection / limit */ +#define SPCI_A1_OUT 0x00001000 /* Audio 1 output DMA protection / limit */ +#define SPCI_AFOU 0x00000800 /* Audio FIFO over- / underflow */ +#define SPCI_V_PE 0x00000400 /* Video protection address */ +#define SPCI_VFOU 0x00000200 /* Video FIFO over- / underflow */ +#define SPCI_FIDA 0x00000100 /* Field ID video port A */ +#define SPCI_FIDB 0x00000080 /* Field ID video port B */ +#define SPCI_PIN3 0x00000040 /* GPIO pin 3 */ +#define SPCI_PIN2 0x00000020 /* GPIO pin 2 */ +#define SPCI_PIN1 0x00000010 /* GPIO pin 1 */ +#define SPCI_PIN0 0x00000008 /* GPIO pin 0 */ +#define SPCI_ECS 0x00000004 /* Event counter 1, 2, 4, 5 */ +#define SPCI_EC3S 0x00000002 /* Event counter 3 */ +#define SPCI_EC0S 0x00000001 /* Event counter 0 */ + +/* i2c */ +#define SAA7146_I2C_ABORT (1<<7) +#define SAA7146_I2C_SPERR (1<<6) +#define SAA7146_I2C_APERR (1<<5) +#define SAA7146_I2C_DTERR (1<<4) +#define SAA7146_I2C_DRERR (1<<3) +#define SAA7146_I2C_AL (1<<2) +#define SAA7146_I2C_ERR (1<<1) +#define SAA7146_I2C_BUSY (1<<0) + +#define SAA7146_I2C_START (0x3) +#define SAA7146_I2C_CONT (0x2) +#define SAA7146_I2C_STOP (0x1) +#define SAA7146_I2C_NOP (0x0) + +#define SAA7146_I2C_BUS_BIT_RATE_6400 (0x500) +#define SAA7146_I2C_BUS_BIT_RATE_3200 (0x100) +#define SAA7146_I2C_BUS_BIT_RATE_480 (0x400) +#define SAA7146_I2C_BUS_BIT_RATE_320 (0x600) +#define SAA7146_I2C_BUS_BIT_RATE_240 (0x700) +#define SAA7146_I2C_BUS_BIT_RATE_120 (0x000) +#define SAA7146_I2C_BUS_BIT_RATE_80 (0x200) +#define SAA7146_I2C_BUS_BIT_RATE_60 (0x300) + +static inline void SAA7146_IER_DISABLE(struct saa7146_dev *x, unsigned y) +{ + unsigned long flags; + spin_lock_irqsave(&x->int_slock, flags); + saa7146_write(x, IER, saa7146_read(x, IER) & ~y); + spin_unlock_irqrestore(&x->int_slock, flags); +} + +static inline void SAA7146_IER_ENABLE(struct saa7146_dev *x, unsigned y) +{ + unsigned long flags; + spin_lock_irqsave(&x->int_slock, flags); + saa7146_write(x, IER, saa7146_read(x, IER) | y); + spin_unlock_irqrestore(&x->int_slock, flags); +} + +#endif diff --git a/include/media/drv-intf/saa7146_vv.h b/include/media/drv-intf/saa7146_vv.h new file mode 100644 index 000000000..635805fb3 --- /dev/null +++ b/include/media/drv-intf/saa7146_vv.h @@ -0,0 +1,266 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef __SAA7146_VV__ +#define __SAA7146_VV__ + +#include <media/v4l2-common.h> +#include <media/v4l2-ioctl.h> +#include <media/v4l2-fh.h> +#include <media/drv-intf/saa7146.h> +#include <media/videobuf-dma-sg.h> + +#define MAX_SAA7146_CAPTURE_BUFFERS 32 /* arbitrary */ +#define BUFFER_TIMEOUT (HZ/2) /* 0.5 seconds */ + +#define WRITE_RPS0(x) do { \ + dev->d_rps0.cpu_addr[ count++ ] = cpu_to_le32(x); \ + } while (0); + +#define WRITE_RPS1(x) do { \ + dev->d_rps1.cpu_addr[ count++ ] = cpu_to_le32(x); \ + } while (0); + +struct saa7146_video_dma { + u32 base_odd; + u32 base_even; + u32 prot_addr; + u32 pitch; + u32 base_page; + u32 num_line_byte; +}; + +#define FORMAT_BYTE_SWAP 0x1 +#define FORMAT_IS_PLANAR 0x2 + +struct saa7146_format { + u32 pixelformat; + u32 trans; + u8 depth; + u8 flags; + u8 swap; +}; + +struct saa7146_standard +{ + char *name; + v4l2_std_id id; + + int v_offset; /* number of lines of vertical offset before processing */ + int v_field; /* number of lines in a field for HPS to process */ + + int h_offset; /* horizontal offset of processing window */ + int h_pixels; /* number of horizontal pixels to process */ + + int v_max_out; + int h_max_out; +}; + +/* buffer for one video/vbi frame */ +struct saa7146_buf { + /* common v4l buffer stuff -- must be first */ + struct videobuf_buffer vb; + + /* saa7146 specific */ + struct v4l2_pix_format *fmt; + int (*activate)(struct saa7146_dev *dev, + struct saa7146_buf *buf, + struct saa7146_buf *next); + + /* page tables */ + struct saa7146_pgtable pt[3]; +}; + +struct saa7146_dmaqueue { + struct saa7146_dev *dev; + struct saa7146_buf *curr; + struct list_head queue; + struct timer_list timeout; +}; + +struct saa7146_overlay { + struct saa7146_fh *fh; + struct v4l2_window win; + struct v4l2_clip clips[16]; + int nclips; +}; + +/* per open data */ +struct saa7146_fh { + /* Must be the first field! */ + struct v4l2_fh fh; + struct saa7146_dev *dev; + + /* video capture */ + struct videobuf_queue video_q; + + /* vbi capture */ + struct videobuf_queue vbi_q; + + unsigned int resources; /* resource management for device open */ +}; + +#define STATUS_OVERLAY 0x01 +#define STATUS_CAPTURE 0x02 + +struct saa7146_vv +{ + /* vbi capture */ + struct saa7146_dmaqueue vbi_dmaq; + struct v4l2_vbi_format vbi_fmt; + struct timer_list vbi_read_timeout; + struct file *vbi_read_timeout_file; + /* vbi workaround interrupt queue */ + wait_queue_head_t vbi_wq; + int vbi_fieldcount; + struct saa7146_fh *vbi_streaming; + + int video_status; + struct saa7146_fh *video_fh; + + /* video overlay */ + struct saa7146_overlay ov; + struct v4l2_framebuffer ov_fb; + struct saa7146_format *ov_fmt; + struct saa7146_fh *ov_suspend; + + /* video capture */ + struct saa7146_dmaqueue video_dmaq; + struct v4l2_pix_format video_fmt; + enum v4l2_field last_field; + + /* common: fixme? shouldn't this be in saa7146_fh? + (this leads to a more complicated question: shall the driver + store the different settings (for example S_INPUT) for every open + and restore it appropriately, or should all settings be common for + all opens? currently, we do the latter, like all other + drivers do... */ + struct saa7146_standard *standard; + + int vflip; + int hflip; + int current_hps_source; + int current_hps_sync; + + struct saa7146_dma d_clipping; /* pointer to clipping memory */ + + unsigned int resources; /* resource management for device */ +}; + +/* flags */ +#define SAA7146_USE_PORT_B_FOR_VBI 0x2 /* use input port b for vbi hardware bug workaround */ + +struct saa7146_ext_vv +{ + /* information about the video capabilities of the device */ + int inputs; + int audios; + u32 capabilities; + int flags; + + /* additionally supported transmission standards */ + struct saa7146_standard *stds; + int num_stds; + int (*std_callback)(struct saa7146_dev*, struct saa7146_standard *); + + /* the extension can override this */ + struct v4l2_ioctl_ops vid_ops; + struct v4l2_ioctl_ops vbi_ops; + /* pointer to the saa7146 core ops */ + const struct v4l2_ioctl_ops *core_ops; + + struct v4l2_file_operations vbi_fops; +}; + +struct saa7146_use_ops { + void (*init)(struct saa7146_dev *, struct saa7146_vv *); + int(*open)(struct saa7146_dev *, struct file *); + void (*release)(struct saa7146_dev *, struct file *); + void (*irq_done)(struct saa7146_dev *, unsigned long status); + ssize_t (*read)(struct file *, char __user *, size_t, loff_t *); +}; + +/* from saa7146_fops.c */ +int saa7146_register_device(struct video_device *vid, struct saa7146_dev *dev, char *name, int type); +int saa7146_unregister_device(struct video_device *vid, struct saa7146_dev *dev); +void saa7146_buffer_finish(struct saa7146_dev *dev, struct saa7146_dmaqueue *q, int state); +void saa7146_buffer_next(struct saa7146_dev *dev, struct saa7146_dmaqueue *q,int vbi); +int saa7146_buffer_queue(struct saa7146_dev *dev, struct saa7146_dmaqueue *q, struct saa7146_buf *buf); +void saa7146_buffer_timeout(struct timer_list *t); +void saa7146_dma_free(struct saa7146_dev* dev,struct videobuf_queue *q, + struct saa7146_buf *buf); + +int saa7146_vv_init(struct saa7146_dev* dev, struct saa7146_ext_vv *ext_vv); +int saa7146_vv_release(struct saa7146_dev* dev); + +/* from saa7146_hlp.c */ +int saa7146_enable_overlay(struct saa7146_fh *fh); +void saa7146_disable_overlay(struct saa7146_fh *fh); + +void saa7146_set_capture(struct saa7146_dev *dev, struct saa7146_buf *buf, struct saa7146_buf *next); +void saa7146_write_out_dma(struct saa7146_dev* dev, int which, struct saa7146_video_dma* vdma) ; +void saa7146_set_hps_source_and_sync(struct saa7146_dev *saa, int source, int sync); +void saa7146_set_gpio(struct saa7146_dev *saa, u8 pin, u8 data); + +/* from saa7146_video.c */ +extern const struct v4l2_ioctl_ops saa7146_video_ioctl_ops; +extern const struct v4l2_ioctl_ops saa7146_vbi_ioctl_ops; +extern const struct saa7146_use_ops saa7146_video_uops; +int saa7146_start_preview(struct saa7146_fh *fh); +int saa7146_stop_preview(struct saa7146_fh *fh); +long saa7146_video_do_ioctl(struct file *file, unsigned int cmd, void *arg); +int saa7146_s_ctrl(struct v4l2_ctrl *ctrl); + +/* from saa7146_vbi.c */ +extern const struct saa7146_use_ops saa7146_vbi_uops; + +/* resource management functions */ +int saa7146_res_get(struct saa7146_fh *fh, unsigned int bit); +void saa7146_res_free(struct saa7146_fh *fh, unsigned int bits); + +#define RESOURCE_DMA1_HPS 0x1 +#define RESOURCE_DMA2_CLP 0x2 +#define RESOURCE_DMA3_BRS 0x4 + +/* saa7146 source inputs */ +#define SAA7146_HPS_SOURCE_PORT_A 0x00 +#define SAA7146_HPS_SOURCE_PORT_B 0x01 +#define SAA7146_HPS_SOURCE_YPB_CPA 0x02 +#define SAA7146_HPS_SOURCE_YPA_CPB 0x03 + +/* sync inputs */ +#define SAA7146_HPS_SYNC_PORT_A 0x00 +#define SAA7146_HPS_SYNC_PORT_B 0x01 + +/* some memory sizes */ +/* max. 16 clipping rectangles */ +#define SAA7146_CLIPPING_MEM (16 * 4 * sizeof(u32)) + +/* some defines for the various clipping-modes */ +#define SAA7146_CLIPPING_RECT 0x4 +#define SAA7146_CLIPPING_RECT_INVERTED 0x5 +#define SAA7146_CLIPPING_MASK 0x6 +#define SAA7146_CLIPPING_MASK_INVERTED 0x7 + +/* output formats: each entry holds four information */ +#define RGB08_COMPOSED 0x0217 /* composed is used in the sense of "not-planar" */ +/* this means: planar?=0, yuv2rgb-conversation-mode=2, dither=yes(=1), format-mode = 7 */ +#define RGB15_COMPOSED 0x0213 +#define RGB16_COMPOSED 0x0210 +#define RGB24_COMPOSED 0x0201 +#define RGB32_COMPOSED 0x0202 + +#define Y8 0x0006 +#define YUV411_COMPOSED 0x0003 +#define YUV422_COMPOSED 0x0000 +/* this means: planar?=1, yuv2rgb-conversion-mode=0, dither=no(=0), format-mode = b */ +#define YUV411_DECOMPOSED 0x100b +#define YUV422_DECOMPOSED 0x1009 +#define YUV420_DECOMPOSED 0x100a + +#define IS_PLANAR(x) (x & 0xf000) + +/* misc defines */ +#define SAA7146_NO_SWAP (0x0) +#define SAA7146_TWO_BYTE_SWAP (0x1) +#define SAA7146_FOUR_BYTE_SWAP (0x2) + +#endif diff --git a/include/media/drv-intf/sh_vou.h b/include/media/drv-intf/sh_vou.h new file mode 100644 index 000000000..8d23181a5 --- /dev/null +++ b/include/media/drv-intf/sh_vou.h @@ -0,0 +1,30 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * SuperH Video Output Unit (VOU) driver header + * + * Copyright (C) 2010, Guennadi Liakhovetski <g.liakhovetski@gmx.de> + */ +#ifndef SH_VOU_H +#define SH_VOU_H + +#include <linux/i2c.h> + +/* Bus flags */ +#define SH_VOU_PCLK_FALLING (1 << 0) +#define SH_VOU_HSYNC_LOW (1 << 1) +#define SH_VOU_VSYNC_LOW (1 << 2) + +enum sh_vou_bus_fmt { + SH_VOU_BUS_8BIT, + SH_VOU_BUS_16BIT, + SH_VOU_BUS_BT656, +}; + +struct sh_vou_pdata { + enum sh_vou_bus_fmt bus_fmt; + int i2c_adap; + struct i2c_board_info *board_info; + unsigned long flags; +}; + +#endif diff --git a/include/media/drv-intf/si476x.h b/include/media/drv-intf/si476x.h new file mode 100644 index 000000000..07f291d50 --- /dev/null +++ b/include/media/drv-intf/si476x.h @@ -0,0 +1,28 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * include/media/drv-intf/si476x.h -- Common definitions for si476x driver + * + * Copyright (C) 2012 Innovative Converged Devices(ICD) + * Copyright (C) 2013 Andrey Smirnov + * + * Author: Andrey Smirnov <andrew.smirnov@gmail.com> + */ + +#ifndef SI476X_H +#define SI476X_H + +#include <linux/types.h> +#include <linux/videodev2.h> + +#include <linux/mfd/si476x-reports.h> + +enum si476x_ctrl_id { + V4L2_CID_SI476X_RSSI_THRESHOLD = (V4L2_CID_USER_SI476X_BASE + 1), + V4L2_CID_SI476X_SNR_THRESHOLD = (V4L2_CID_USER_SI476X_BASE + 2), + V4L2_CID_SI476X_MAX_TUNE_ERROR = (V4L2_CID_USER_SI476X_BASE + 3), + V4L2_CID_SI476X_HARMONICS_COUNT = (V4L2_CID_USER_SI476X_BASE + 4), + V4L2_CID_SI476X_DIVERSITY_MODE = (V4L2_CID_USER_SI476X_BASE + 5), + V4L2_CID_SI476X_INTERCHIP_LINK = (V4L2_CID_USER_SI476X_BASE + 6), +}; + +#endif /* SI476X_H*/ diff --git a/include/media/drv-intf/tea575x.h b/include/media/drv-intf/tea575x.h new file mode 100644 index 000000000..50c9f89e4 --- /dev/null +++ b/include/media/drv-intf/tea575x.h @@ -0,0 +1,70 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +#ifndef __SOUND_TEA575X_TUNER_H +#define __SOUND_TEA575X_TUNER_H + +/* + * ALSA driver for TEA5757/5759 Philips AM/FM tuner chips + * + * Copyright (c) 2004 Jaroslav Kysela <perex@perex.cz> + */ + +#include <linux/videodev2.h> +#include <media/v4l2-ctrls.h> +#include <media/v4l2-dev.h> +#include <media/v4l2-device.h> + +#define TEA575X_FMIF 10700 +#define TEA575X_AMIF 450 + +#define TEA575X_DATA (1 << 0) +#define TEA575X_CLK (1 << 1) +#define TEA575X_WREN (1 << 2) +#define TEA575X_MOST (1 << 3) + +struct snd_tea575x; + +struct snd_tea575x_ops { + /* Drivers using snd_tea575x must either define read_ and write_val */ + void (*write_val)(struct snd_tea575x *tea, u32 val); + u32 (*read_val)(struct snd_tea575x *tea); + /* Or define the 3 pin functions */ + void (*set_pins)(struct snd_tea575x *tea, u8 pins); + u8 (*get_pins)(struct snd_tea575x *tea); + void (*set_direction)(struct snd_tea575x *tea, bool output); +}; + +struct snd_tea575x { + struct v4l2_device *v4l2_dev; + struct v4l2_file_operations fops; + struct video_device vd; /* video device */ + int radio_nr; /* radio_nr */ + bool tea5759; /* 5759 chip is present */ + bool has_am; /* Device can tune to AM freqs */ + bool cannot_read_data; /* Device cannot read the data pin */ + bool cannot_mute; /* Device cannot mute */ + bool mute; /* Device is muted? */ + bool stereo; /* receiving stereo */ + bool tuned; /* tuned to a station */ + unsigned int val; /* hw value */ + u32 band; /* 0: FM, 1: FM-Japan, 2: AM */ + u32 freq; /* frequency */ + struct mutex mutex; + const struct snd_tea575x_ops *ops; + void *private_data; + u8 card[32]; + u8 bus_info[32]; + struct v4l2_ctrl_handler ctrl_handler; + int (*ext_init)(struct snd_tea575x *tea); +}; + +int snd_tea575x_enum_freq_bands(struct snd_tea575x *tea, + struct v4l2_frequency_band *band); +int snd_tea575x_g_tuner(struct snd_tea575x *tea, struct v4l2_tuner *v); +int snd_tea575x_s_hw_freq_seek(struct file *file, struct snd_tea575x *tea, + const struct v4l2_hw_freq_seek *a); +int snd_tea575x_hw_init(struct snd_tea575x *tea); +int snd_tea575x_init(struct snd_tea575x *tea, struct module *owner); +void snd_tea575x_exit(struct snd_tea575x *tea); +void snd_tea575x_set_freq(struct snd_tea575x *tea); + +#endif /* __SOUND_TEA575X_TUNER_H */ diff --git a/include/media/dvb-usb-ids.h b/include/media/dvb-usb-ids.h new file mode 100644 index 000000000..d37cb74b7 --- /dev/null +++ b/include/media/dvb-usb-ids.h @@ -0,0 +1,433 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* dvb-usb-ids.h is part of the DVB USB library. + * + * Copyright (C) 2004-5 Patrick Boettcher (patrick.boettcher@posteo.de) see + * dvb-usb-init.c for copyright information. + * + * a header file containing define's for the USB device supported by the + * various drivers. + */ +#ifndef _DVB_USB_IDS_H_ +#define _DVB_USB_IDS_H_ + +/* Vendor IDs */ +#define USB_VID_ADSTECH 0x06e1 +#define USB_VID_AFATECH 0x15a4 +#define USB_VID_ALCOR_MICRO 0x058f +#define USB_VID_ALINK 0x05e3 +#define USB_VID_AMT 0x1c73 +#define USB_VID_ANCHOR 0x0547 +#define USB_VID_ANSONIC 0x10b9 +#define USB_VID_ANUBIS_ELECTRONIC 0x10fd +#define USB_VID_ASUS 0x0b05 +#define USB_VID_AVERMEDIA 0x07ca +#define USB_VID_COMPRO 0x185b +#define USB_VID_COMPRO_UNK 0x145f +#define USB_VID_CONEXANT 0x0572 +#define USB_VID_CYPRESS 0x04b4 +#define USB_VID_DEXATEK 0x1d19 +#define USB_VID_DIBCOM 0x10b8 +#define USB_VID_DPOSH 0x1498 +#define USB_VID_DVICO 0x0fe9 +#define USB_VID_E3C 0x18b4 +#define USB_VID_ELGATO 0x0fd9 +#define USB_VID_EMPIA 0xeb1a +#define USB_VID_GENPIX 0x09c0 +#define USB_VID_GRANDTEC 0x5032 +#define USB_VID_GTEK 0x1f4d +#define USB_VID_HANFTEK 0x15f4 +#define USB_VID_HAUPPAUGE 0x2040 +#define USB_VID_HYPER_PALTEK 0x1025 +#define USB_VID_INTEL 0x8086 +#define USB_VID_ITETECH 0x048d +#define USB_VID_KWORLD 0xeb2a +#define USB_VID_KWORLD_2 0x1b80 +#define USB_VID_KYE 0x0458 +#define USB_VID_LEADTEK 0x0413 +#define USB_VID_LITEON 0x04ca +#define USB_VID_MEDION 0x1660 +#define USB_VID_MIGLIA 0x18f3 +#define USB_VID_MSI 0x0db0 +#define USB_VID_MSI_2 0x1462 +#define USB_VID_OPERA1 0x695c +#define USB_VID_PINNACLE 0x2304 +#define USB_VID_PCTV 0x2013 +#define USB_VID_PIXELVIEW 0x1554 +#define USB_VID_REALTEK 0x0bda +#define USB_VID_TECHNOTREND 0x0b48 +#define USB_VID_TERRATEC 0x0ccd +#define USB_VID_TERRATEC_2 0x153b +#define USB_VID_TELESTAR 0x10b9 +#define USB_VID_VISIONPLUS 0x13d3 +#define USB_VID_SONY 0x1415 +#define USB_PID_TEVII_S421 0xd421 +#define USB_PID_TEVII_S480_1 0xd481 +#define USB_PID_TEVII_S480_2 0xd482 +#define USB_PID_TEVII_S630 0xd630 +#define USB_PID_TEVII_S632 0xd632 +#define USB_PID_TEVII_S650 0xd650 +#define USB_PID_TEVII_S660 0xd660 +#define USB_PID_TEVII_S662 0xd662 +#define USB_VID_TWINHAN 0x1822 +#define USB_VID_ULTIMA_ELECTRONIC 0x05d8 +#define USB_VID_UNIWILL 0x1584 +#define USB_VID_WIDEVIEW 0x14aa +#define USB_VID_GIGABYTE 0x1044 +#define USB_VID_YUAN 0x1164 +#define USB_VID_XTENSIONS 0x1ae7 +#define USB_VID_ZYDAS 0x0ace +#define USB_VID_HUMAX_COEX 0x10b9 +#define USB_VID_774 0x7a69 +#define USB_VID_EVOLUTEPC 0x1e59 +#define USB_VID_AZUREWAVE 0x13d3 +#define USB_VID_TECHNISAT 0x14f7 +#define USB_VID_HAMA 0x147f +#define USB_VID_MICROSOFT 0x045e + +/* Product IDs */ +#define USB_PID_ADSTECH_USB2_COLD 0xa333 +#define USB_PID_ADSTECH_USB2_WARM 0xa334 +#define USB_PID_AFATECH_AF9005 0x9020 +#define USB_PID_AFATECH_AF9015_9015 0x9015 +#define USB_PID_AFATECH_AF9015_9016 0x9016 +#define USB_PID_AFATECH_AF9035_1000 0x1000 +#define USB_PID_AFATECH_AF9035_1001 0x1001 +#define USB_PID_AFATECH_AF9035_1002 0x1002 +#define USB_PID_AFATECH_AF9035_1003 0x1003 +#define USB_PID_AFATECH_AF9035_9035 0x9035 +#define USB_PID_TREKSTOR_DVBT 0x901b +#define USB_PID_TREKSTOR_TERRES_2_0 0xC803 +#define USB_PID_ALINK_DTU 0xf170 +#define USB_PID_ANSONIC_DVBT_USB 0x6000 +#define USB_PID_ANYSEE 0x861f +#define USB_PID_AZUREWAVE_AD_TU700 0x3237 +#define USB_PID_AZUREWAVE_6007 0x0ccd +#define USB_PID_AVERMEDIA_DVBT_USB_COLD 0x0001 +#define USB_PID_AVERMEDIA_DVBT_USB_WARM 0x0002 +#define USB_PID_AVERMEDIA_DVBT_USB2_COLD 0xa800 +#define USB_PID_AVERMEDIA_DVBT_USB2_WARM 0xa801 +#define USB_PID_COMPRO_DVBU2000_COLD 0xd000 +#define USB_PID_COMPRO_DVBU2000_WARM 0xd001 +#define USB_PID_COMPRO_DVBU2000_UNK_COLD 0x010c +#define USB_PID_COMPRO_DVBU2000_UNK_WARM 0x010d +#define USB_PID_COMPRO_VIDEOMATE_U500 0x1e78 +#define USB_PID_COMPRO_VIDEOMATE_U500_PC 0x1e80 +#define USB_PID_CONCEPTRONIC_CTVDIGRCU 0xe397 +#define USB_PID_CONEXANT_D680_DMB 0x86d6 +#define USB_PID_CREATIX_CTX1921 0x1921 +#define USB_PID_DELOCK_USB2_DVBT 0xb803 +#define USB_PID_DIBCOM_HOOK_DEFAULT 0x0064 +#define USB_PID_DIBCOM_HOOK_DEFAULT_REENUM 0x0065 +#define USB_PID_DIBCOM_MOD3000_COLD 0x0bb8 +#define USB_PID_DIBCOM_MOD3000_WARM 0x0bb9 +#define USB_PID_DIBCOM_MOD3001_COLD 0x0bc6 +#define USB_PID_DIBCOM_MOD3001_WARM 0x0bc7 +#define USB_PID_DIBCOM_STK7700P 0x1e14 +#define USB_PID_DIBCOM_STK7700P_PC 0x1e78 +#define USB_PID_DIBCOM_STK7700D 0x1ef0 +#define USB_PID_DIBCOM_STK7700_U7000 0x7001 +#define USB_PID_DIBCOM_STK7070P 0x1ebc +#define USB_PID_DIBCOM_STK7070PD 0x1ebe +#define USB_PID_DIBCOM_STK807XP 0x1f90 +#define USB_PID_DIBCOM_STK807XPVR 0x1f98 +#define USB_PID_DIBCOM_STK8096GP 0x1fa0 +#define USB_PID_DIBCOM_STK8096PVR 0x1faa +#define USB_PID_DIBCOM_NIM8096MD 0x1fa8 +#define USB_PID_DIBCOM_TFE8096P 0x1f9C +#define USB_PID_DIBCOM_ANCHOR_2135_COLD 0x2131 +#define USB_PID_DIBCOM_STK7770P 0x1e80 +#define USB_PID_DIBCOM_NIM7090 0x1bb2 +#define USB_PID_DIBCOM_TFE7090PVR 0x1bb4 +#define USB_PID_DIBCOM_TFE7790P 0x1e6e +#define USB_PID_DIBCOM_NIM9090M 0x2383 +#define USB_PID_DIBCOM_NIM9090MD 0x2384 +#define USB_PID_DPOSH_M9206_COLD 0x9206 +#define USB_PID_DPOSH_M9206_WARM 0xa090 +#define USB_PID_E3C_EC168 0x1689 +#define USB_PID_E3C_EC168_2 0xfffa +#define USB_PID_E3C_EC168_3 0xfffb +#define USB_PID_E3C_EC168_4 0x1001 +#define USB_PID_E3C_EC168_5 0x1002 +#define USB_PID_FREECOM_DVBT 0x0160 +#define USB_PID_FREECOM_DVBT_2 0x0161 +#define USB_PID_UNIWILL_STK7700P 0x6003 +#define USB_PID_GENIUS_TVGO_DVB_T03 0x4012 +#define USB_PID_GRANDTEC_DVBT_USB_COLD 0x0fa0 +#define USB_PID_GRANDTEC_DVBT_USB_WARM 0x0fa1 +#define USB_PID_GOTVIEW_SAT_HD 0x5456 +#define USB_PID_INTEL_CE9500 0x9500 +#define USB_PID_ITETECH_IT9135 0x9135 +#define USB_PID_ITETECH_IT9135_9005 0x9005 +#define USB_PID_ITETECH_IT9135_9006 0x9006 +#define USB_PID_ITETECH_IT9303 0x9306 +#define USB_PID_KWORLD_399U 0xe399 +#define USB_PID_KWORLD_399U_2 0xe400 +#define USB_PID_KWORLD_395U 0xe396 +#define USB_PID_KWORLD_395U_2 0xe39b +#define USB_PID_KWORLD_395U_3 0xe395 +#define USB_PID_KWORLD_395U_4 0xe39a +#define USB_PID_KWORLD_MC810 0xc810 +#define USB_PID_KWORLD_PC160_2T 0xc160 +#define USB_PID_KWORLD_PC160_T 0xc161 +#define USB_PID_KWORLD_UB383_T 0xe383 +#define USB_PID_KWORLD_UB499_2T_T09 0xe409 +#define USB_PID_KWORLD_VSTREAM_COLD 0x17de +#define USB_PID_KWORLD_VSTREAM_WARM 0x17df +#define USB_PID_PROF_1100 0xb012 +#define USB_PID_TERRATEC_CINERGY_S 0x0064 +#define USB_PID_TERRATEC_CINERGY_T_USB_XE 0x0055 +#define USB_PID_TERRATEC_CINERGY_T_USB_XE_REV2 0x0069 +#define USB_PID_TERRATEC_CINERGY_T_STICK 0x0093 +#define USB_PID_TERRATEC_CINERGY_T_STICK_RC 0x0097 +#define USB_PID_TERRATEC_CINERGY_T_STICK_DUAL_RC 0x0099 +#define USB_PID_TERRATEC_CINERGY_T_STICK_BLACK_REV1 0x00a9 +#define USB_PID_TERRATEC_CINERGY_TC2_STICK 0x10b2 +#define USB_PID_TWINHAN_VP7041_COLD 0x3201 +#define USB_PID_TWINHAN_VP7041_WARM 0x3202 +#define USB_PID_TWINHAN_VP7020_COLD 0x3203 +#define USB_PID_TWINHAN_VP7020_WARM 0x3204 +#define USB_PID_TWINHAN_VP7045_COLD 0x3205 +#define USB_PID_TWINHAN_VP7045_WARM 0x3206 +#define USB_PID_TWINHAN_VP7021_COLD 0x3207 +#define USB_PID_TWINHAN_VP7021_WARM 0x3208 +#define USB_PID_TWINHAN_VP7049 0x3219 +#define USB_PID_TINYTWIN 0x3226 +#define USB_PID_TINYTWIN_2 0xe402 +#define USB_PID_TINYTWIN_3 0x9016 +#define USB_PID_DNTV_TINYUSB2_COLD 0x3223 +#define USB_PID_DNTV_TINYUSB2_WARM 0x3224 +#define USB_PID_ULTIMA_TVBOX_COLD 0x8105 +#define USB_PID_ULTIMA_TVBOX_WARM 0x8106 +#define USB_PID_ULTIMA_TVBOX_AN2235_COLD 0x8107 +#define USB_PID_ULTIMA_TVBOX_AN2235_WARM 0x8108 +#define USB_PID_ULTIMA_TVBOX_ANCHOR_COLD 0x2235 +#define USB_PID_ULTIMA_TVBOX_USB2_COLD 0x8109 +#define USB_PID_ULTIMA_TVBOX_USB2_WARM 0x810a +#define USB_PID_ARTEC_T14_COLD 0x810b +#define USB_PID_ARTEC_T14_WARM 0x810c +#define USB_PID_ARTEC_T14BR 0x810f +#define USB_PID_ULTIMA_TVBOX_USB2_FX_COLD 0x8613 +#define USB_PID_ULTIMA_TVBOX_USB2_FX_WARM 0x1002 +#define USB_PID_UNK_HYPER_PALTEK_COLD 0x005e +#define USB_PID_UNK_HYPER_PALTEK_WARM 0x005f +#define USB_PID_HANFTEK_UMT_010_COLD 0x0001 +#define USB_PID_HANFTEK_UMT_010_WARM 0x0015 +#define USB_PID_DTT200U_COLD 0x0201 +#define USB_PID_DTT200U_WARM 0x0301 +#define USB_PID_WT220U_ZAP250_COLD 0x0220 +#define USB_PID_WT220U_COLD 0x0222 +#define USB_PID_WT220U_WARM 0x0221 +#define USB_PID_WT220U_FC_COLD 0x0225 +#define USB_PID_WT220U_FC_WARM 0x0226 +#define USB_PID_WT220U_ZL0353_COLD 0x022a +#define USB_PID_WT220U_ZL0353_WARM 0x022b +#define USB_PID_WINTV_NOVA_T_USB2_COLD 0x9300 +#define USB_PID_WINTV_NOVA_T_USB2_WARM 0x9301 +#define USB_PID_HAUPPAUGE_NOVA_T_500 0x9941 +#define USB_PID_HAUPPAUGE_NOVA_T_500_2 0x9950 +#define USB_PID_HAUPPAUGE_NOVA_T_500_3 0x8400 +#define USB_PID_HAUPPAUGE_NOVA_T_STICK 0x7050 +#define USB_PID_HAUPPAUGE_NOVA_T_STICK_2 0x7060 +#define USB_PID_HAUPPAUGE_NOVA_T_STICK_3 0x7070 +#define USB_PID_HAUPPAUGE_MYTV_T 0x7080 +#define USB_PID_HAUPPAUGE_NOVA_TD_STICK 0x9580 +#define USB_PID_HAUPPAUGE_NOVA_TD_STICK_52009 0x5200 +#define USB_PID_HAUPPAUGE_TIGER_ATSC 0xb200 +#define USB_PID_HAUPPAUGE_TIGER_ATSC_B210 0xb210 +#define USB_PID_AVERMEDIA_EXPRESS 0xb568 +#define USB_PID_AVERMEDIA_VOLAR 0xa807 +#define USB_PID_AVERMEDIA_VOLAR_2 0xb808 +#define USB_PID_AVERMEDIA_VOLAR_A868R 0xa868 +#define USB_PID_AVERMEDIA_MCE_USB_M038 0x1228 +#define USB_PID_AVERMEDIA_HYBRID_ULTRA_USB_M039R 0x0039 +#define USB_PID_AVERMEDIA_HYBRID_ULTRA_USB_M039R_ATSC 0x1039 +#define USB_PID_AVERMEDIA_HYBRID_ULTRA_USB_M039R_DVBT 0x2039 +#define USB_PID_AVERMEDIA_VOLAR_X 0xa815 +#define USB_PID_AVERMEDIA_VOLAR_X_2 0x8150 +#define USB_PID_AVERMEDIA_A309 0xa309 +#define USB_PID_AVERMEDIA_A310 0xa310 +#define USB_PID_AVERMEDIA_A850 0x850a +#define USB_PID_AVERMEDIA_A850T 0x850b +#define USB_PID_AVERMEDIA_A805 0xa805 +#define USB_PID_AVERMEDIA_A815M 0x815a +#define USB_PID_AVERMEDIA_A835 0xa835 +#define USB_PID_AVERMEDIA_B835 0xb835 +#define USB_PID_AVERMEDIA_A835B_1835 0x1835 +#define USB_PID_AVERMEDIA_A835B_2835 0x2835 +#define USB_PID_AVERMEDIA_A835B_3835 0x3835 +#define USB_PID_AVERMEDIA_A835B_4835 0x4835 +#define USB_PID_AVERMEDIA_1867 0x1867 +#define USB_PID_AVERMEDIA_A867 0xa867 +#define USB_PID_AVERMEDIA_H335 0x0335 +#define USB_PID_AVERMEDIA_TD110 0xa110 +#define USB_PID_AVERMEDIA_TD310 0x1871 +#define USB_PID_AVERMEDIA_TWINSTAR 0x0825 +#define USB_PID_TECHNOTREND_CONNECT_S2400 0x3006 +#define USB_PID_TECHNOTREND_CONNECT_S2400_8KEEPROM 0x3009 +#define USB_PID_TECHNOTREND_CONNECT_CT3650 0x300d +#define USB_PID_TECHNOTREND_CONNECT_S2_4600 0x3011 +#define USB_PID_TECHNOTREND_CONNECT_CT2_4650_CI 0x3012 +#define USB_PID_TECHNOTREND_CONNECT_CT2_4650_CI_2 0x3015 +#define USB_PID_TECHNOTREND_TVSTICK_CT2_4400 0x3014 +#define USB_PID_TECHNOTREND_CONNECT_S2_4650_CI 0x3017 +#define USB_PID_TERRATEC_CINERGY_DT_XS_DIVERSITY 0x005a +#define USB_PID_TERRATEC_CINERGY_DT_XS_DIVERSITY_2 0x0081 +#define USB_PID_TERRATEC_CINERGY_HT_USB_XE 0x0058 +#define USB_PID_TERRATEC_CINERGY_HT_EXPRESS 0x0060 +#define USB_PID_TERRATEC_CINERGY_T_EXPRESS 0x0062 +#define USB_PID_TERRATEC_CINERGY_T_XXS 0x0078 +#define USB_PID_TERRATEC_CINERGY_T_XXS_2 0x00ab +#define USB_PID_TERRATEC_CINERGY_S2_R1 0x00a8 +#define USB_PID_TERRATEC_CINERGY_S2_R2 0x00b0 +#define USB_PID_TERRATEC_CINERGY_S2_R3 0x0102 +#define USB_PID_TERRATEC_CINERGY_S2_R4 0x0105 +#define USB_PID_TERRATEC_CINERGY_S2_1 0x1181 +#define USB_PID_TERRATEC_CINERGY_S2_2 0x1182 +#define USB_PID_TERRATEC_H7 0x10b4 +#define USB_PID_TERRATEC_H7_2 0x10a3 +#define USB_PID_TERRATEC_H7_3 0x10a5 +#define USB_PID_TERRATEC_T1 0x10ae +#define USB_PID_TERRATEC_T3 0x10a0 +#define USB_PID_TERRATEC_T5 0x10a1 +#define USB_PID_NOXON_DAB_STICK 0x00b3 +#define USB_PID_NOXON_DAB_STICK_REV2 0x00e0 +#define USB_PID_NOXON_DAB_STICK_REV3 0x00b4 +#define USB_PID_PINNACLE_EXPRESSCARD_320CX 0x022e +#define USB_PID_PINNACLE_PCTV2000E 0x022c +#define USB_PID_PINNACLE_PCTV_DVB_T_FLASH 0x0228 +#define USB_PID_PINNACLE_PCTV_DUAL_DIVERSITY_DVB_T 0x0229 +#define USB_PID_PINNACLE_PCTV71E 0x022b +#define USB_PID_PINNACLE_PCTV72E 0x0236 +#define USB_PID_PINNACLE_PCTV73E 0x0237 +#define USB_PID_PINNACLE_PCTV310E 0x3211 +#define USB_PID_PINNACLE_PCTV801E 0x023a +#define USB_PID_PINNACLE_PCTV801E_SE 0x023b +#define USB_PID_PINNACLE_PCTV340E 0x023d +#define USB_PID_PINNACLE_PCTV340E_SE 0x023e +#define USB_PID_PINNACLE_PCTV73A 0x0243 +#define USB_PID_PINNACLE_PCTV73ESE 0x0245 +#define USB_PID_PINNACLE_PCTV74E 0x0246 +#define USB_PID_PINNACLE_PCTV282E 0x0248 +#define USB_PID_PIXELVIEW_SBTVD 0x5010 +#define USB_PID_PCTV_200E 0x020e +#define USB_PID_PCTV_400E 0x020f +#define USB_PID_PCTV_450E 0x0222 +#define USB_PID_PCTV_452E 0x021f +#define USB_PID_PCTV_78E 0x025a +#define USB_PID_PCTV_79E 0x0262 +#define USB_PID_REALTEK_RTL2831U 0x2831 +#define USB_PID_REALTEK_RTL2832U 0x2832 +#define USB_PID_TECHNOTREND_CONNECT_S2_3600 0x3007 +#define USB_PID_TECHNOTREND_CONNECT_S2_3650_CI 0x300a +#define USB_PID_NEBULA_DIGITV 0x0201 +#define USB_PID_DVICO_BLUEBIRD_LGDT 0xd820 +#define USB_PID_DVICO_BLUEBIRD_LG064F_COLD 0xd500 +#define USB_PID_DVICO_BLUEBIRD_LG064F_WARM 0xd501 +#define USB_PID_DVICO_BLUEBIRD_LGZ201_COLD 0xdb00 +#define USB_PID_DVICO_BLUEBIRD_LGZ201_WARM 0xdb01 +#define USB_PID_DVICO_BLUEBIRD_TH7579_COLD 0xdb10 +#define USB_PID_DVICO_BLUEBIRD_TH7579_WARM 0xdb11 +#define USB_PID_DVICO_BLUEBIRD_DUAL_1_COLD 0xdb50 +#define USB_PID_DVICO_BLUEBIRD_DUAL_1_WARM 0xdb51 +#define USB_PID_DVICO_BLUEBIRD_DUAL_2_COLD 0xdb58 +#define USB_PID_DVICO_BLUEBIRD_DUAL_2_WARM 0xdb59 +#define USB_PID_DVICO_BLUEBIRD_DUAL_4 0xdb78 +#define USB_PID_DVICO_BLUEBIRD_DUAL_4_REV_2 0xdb98 +#define USB_PID_DVICO_BLUEBIRD_DVB_T_NANO_2 0xdb70 +#define USB_PID_DVICO_BLUEBIRD_DVB_T_NANO_2_NFW_WARM 0xdb71 +#define USB_PID_DIGITALNOW_BLUEBIRD_DUAL_1_COLD 0xdb54 +#define USB_PID_DIGITALNOW_BLUEBIRD_DUAL_1_WARM 0xdb55 +#define USB_PID_MEDION_MD95700 0x0932 +#define USB_PID_MSI_MEGASKY580 0x5580 +#define USB_PID_MSI_MEGASKY580_55801 0x5581 +#define USB_PID_KYE_DVB_T_COLD 0x701e +#define USB_PID_KYE_DVB_T_WARM 0x701f +#define USB_PID_LITEON_DVB_T_COLD 0xf000 +#define USB_PID_LITEON_DVB_T_WARM 0xf001 +#define USB_PID_DIGIVOX_MINI_SL_COLD 0xe360 +#define USB_PID_DIGIVOX_MINI_SL_WARM 0xe361 +#define USB_PID_GRANDTEC_DVBT_USB2_COLD 0x0bc6 +#define USB_PID_GRANDTEC_DVBT_USB2_WARM 0x0bc7 +#define USB_PID_WINFAST_DTV2000DS 0x6a04 +#define USB_PID_WINFAST_DTV2000DS_PLUS 0x6f12 +#define USB_PID_WINFAST_DTV_DONGLE_COLD 0x6025 +#define USB_PID_WINFAST_DTV_DONGLE_WARM 0x6026 +#define USB_PID_WINFAST_DTV_DONGLE_STK7700P 0x6f00 +#define USB_PID_WINFAST_DTV_DONGLE_H 0x60f6 +#define USB_PID_WINFAST_DTV_DONGLE_STK7700P_2 0x6f01 +#define USB_PID_WINFAST_DTV_DONGLE_GOLD 0x6029 +#define USB_PID_WINFAST_DTV_DONGLE_MINID 0x6f0f +#define USB_PID_GENPIX_8PSK_REV_1_COLD 0x0200 +#define USB_PID_GENPIX_8PSK_REV_1_WARM 0x0201 +#define USB_PID_GENPIX_8PSK_REV_2 0x0202 +#define USB_PID_GENPIX_SKYWALKER_1 0x0203 +#define USB_PID_GENPIX_SKYWALKER_CW3K 0x0204 +#define USB_PID_GENPIX_SKYWALKER_2 0x0206 +#define USB_PID_SIGMATEK_DVB_110 0x6610 +#define USB_PID_MSI_DIGI_VOX_MINI_II 0x1513 +#define USB_PID_MSI_DIGIVOX_DUO 0x8801 +#define USB_PID_OPERA1_COLD 0x2830 +#define USB_PID_OPERA1_WARM 0x3829 +#define USB_PID_LIFEVIEW_TV_WALKER_TWIN_COLD 0x0514 +#define USB_PID_LIFEVIEW_TV_WALKER_TWIN_WARM 0x0513 +#define USB_PID_GIGABYTE_U7000 0x7001 +#define USB_PID_GIGABYTE_U8000 0x7002 +#define USB_PID_ASUS_U3000 0x171f +#define USB_PID_ASUS_U3000H 0x1736 +#define USB_PID_ASUS_U3100 0x173f +#define USB_PID_ASUS_U3100MINI_PLUS 0x1779 +#define USB_PID_YUAN_EC372S 0x1edc +#define USB_PID_YUAN_STK7700PH 0x1f08 +#define USB_PID_YUAN_PD378S 0x2edc +#define USB_PID_YUAN_MC770 0x0871 +#define USB_PID_YUAN_STK7700D 0x1efc +#define USB_PID_YUAN_STK7700D_2 0x1e8c +#define USB_PID_DW2102 0x2102 +#define USB_PID_DW2104 0x2104 +#define USB_PID_DW3101 0x3101 +#define USB_PID_XTENSIONS_XD_380 0x0381 +#define USB_PID_TELESTAR_STARSTICK_2 0x8000 +#define USB_PID_MSI_DIGI_VOX_MINI_III 0x8807 +#define USB_PID_SONY_PLAYTV 0x0003 +#define USB_PID_MYGICA_D689 0xd811 +#define USB_PID_MYGICA_T230 0xc688 +#define USB_PID_MYGICA_T230C 0xc689 +#define USB_PID_MYGICA_T230C2 0xc68a +#define USB_PID_MYGICA_T230C_LITE 0xc699 +#define USB_PID_ELGATO_EYETV_DIVERSITY 0x0011 +#define USB_PID_ELGATO_EYETV_DTT 0x0021 +#define USB_PID_ELGATO_EYETV_DTT_2 0x003f +#define USB_PID_ELGATO_EYETV_DTT_Dlx 0x0020 +#define USB_PID_ELGATO_EYETV_SAT 0x002a +#define USB_PID_ELGATO_EYETV_SAT_V2 0x0025 +#define USB_PID_ELGATO_EYETV_SAT_V3 0x0036 +#define USB_PID_DVB_T_USB_STICK_HIGH_SPEED_COLD 0x5000 +#define USB_PID_DVB_T_USB_STICK_HIGH_SPEED_WARM 0x5001 +#define USB_PID_FRIIO_WHITE 0x0001 +#define USB_PID_TVWAY_PLUS 0x0002 +#define USB_PID_SVEON_STV20 0xe39d +#define USB_PID_SVEON_STV20_RTL2832U 0xd39d +#define USB_PID_SVEON_STV21 0xd3b0 +#define USB_PID_SVEON_STV22 0xe401 +#define USB_PID_SVEON_STV22_IT9137 0xe411 +#define USB_PID_AZUREWAVE_AZ6027 0x3275 +#define USB_PID_TERRATEC_DVBS2CI_V1 0x10a4 +#define USB_PID_TERRATEC_DVBS2CI_V2 0x10ac +#define USB_PID_TECHNISAT_USB2_HDCI_V1 0x0001 +#define USB_PID_TECHNISAT_USB2_HDCI_V2 0x0002 +#define USB_PID_TECHNISAT_USB2_CABLESTAR_HDCI 0x0003 +#define USB_PID_TECHNISAT_AIRSTAR_TELESTICK_2 0x0004 +#define USB_PID_TECHNISAT_USB2_DVB_S2 0x0500 +#define USB_PID_CPYTO_REDI_PC50A 0xa803 +#define USB_PID_CTVDIGDUAL_V2 0xe410 +#define USB_PID_PCTV_2002E 0x025c +#define USB_PID_PCTV_2002E_SE 0x025d +#define USB_PID_SVEON_STV27 0xd3af +#define USB_PID_TURBOX_DTT_2000 0xd3a4 +#define USB_PID_WINTV_SOLOHD 0x0264 +#define USB_PID_WINTV_SOLOHD_2 0x8268 +#define USB_PID_EVOLVEO_XTRATV_STICK 0xa115 +#define USB_PID_HAMA_DVBT_HYBRID 0x2758 +#define USB_PID_XBOX_ONE_TUNER 0x02d5 +#define USB_PID_PROLECTRIX_DV107669 0xd803 +#endif diff --git a/include/media/dvb_ca_en50221.h b/include/media/dvb_ca_en50221.h new file mode 100644 index 000000000..a1c014b0a --- /dev/null +++ b/include/media/dvb_ca_en50221.h @@ -0,0 +1,142 @@ +/* + * dvb_ca.h: generic DVB functions for EN50221 CA interfaces + * + * Copyright (C) 2004 Andrew de Quincey + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU Lesser General Public License + * as published by the Free Software Foundation; either version 2.1 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef _DVB_CA_EN50221_H_ +#define _DVB_CA_EN50221_H_ + +#include <linux/list.h> +#include <linux/dvb/ca.h> + +#include <media/dvbdev.h> + +#define DVB_CA_EN50221_POLL_CAM_PRESENT 1 +#define DVB_CA_EN50221_POLL_CAM_CHANGED 2 +#define DVB_CA_EN50221_POLL_CAM_READY 4 + +#define DVB_CA_EN50221_FLAG_IRQ_CAMCHANGE 1 +#define DVB_CA_EN50221_FLAG_IRQ_FR 2 +#define DVB_CA_EN50221_FLAG_IRQ_DA 4 + +#define DVB_CA_EN50221_CAMCHANGE_REMOVED 0 +#define DVB_CA_EN50221_CAMCHANGE_INSERTED 1 + +/** + * struct dvb_ca_en50221- Structure describing a CA interface + * + * @owner: the module owning this structure + * @read_attribute_mem: function for reading attribute memory on the CAM + * @write_attribute_mem: function for writing attribute memory on the CAM + * @read_cam_control: function for reading the control interface on the CAM + * @write_cam_control: function for reading the control interface on the CAM + * @read_data: function for reading data (block mode) + * @write_data: function for writing data (block mode) + * @slot_reset: function to reset the CAM slot + * @slot_shutdown: function to shutdown a CAM slot + * @slot_ts_enable: function to enable the Transport Stream on a CAM slot + * @poll_slot_status: function to poll slot status. Only necessary if + * DVB_CA_FLAG_EN50221_IRQ_CAMCHANGE is not set. + * @data: private data, used by caller. + * @private: Opaque data used by the dvb_ca core. Do not modify! + * + * NOTE: the read_*, write_* and poll_slot_status functions will be + * called for different slots concurrently and need to use locks where + * and if appropriate. There will be no concurrent access to one slot. + */ +struct dvb_ca_en50221 { + struct module *owner; + + int (*read_attribute_mem)(struct dvb_ca_en50221 *ca, + int slot, int address); + int (*write_attribute_mem)(struct dvb_ca_en50221 *ca, + int slot, int address, u8 value); + + int (*read_cam_control)(struct dvb_ca_en50221 *ca, + int slot, u8 address); + int (*write_cam_control)(struct dvb_ca_en50221 *ca, + int slot, u8 address, u8 value); + + int (*read_data)(struct dvb_ca_en50221 *ca, + int slot, u8 *ebuf, int ecount); + int (*write_data)(struct dvb_ca_en50221 *ca, + int slot, u8 *ebuf, int ecount); + + int (*slot_reset)(struct dvb_ca_en50221 *ca, int slot); + int (*slot_shutdown)(struct dvb_ca_en50221 *ca, int slot); + int (*slot_ts_enable)(struct dvb_ca_en50221 *ca, int slot); + + int (*poll_slot_status)(struct dvb_ca_en50221 *ca, int slot, int open); + + void *data; + + void *private; +}; + +/* + * Functions for reporting IRQ events + */ + +/** + * dvb_ca_en50221_camchange_irq - A CAMCHANGE IRQ has occurred. + * + * @pubca: CA instance. + * @slot: Slot concerned. + * @change_type: One of the DVB_CA_CAMCHANGE_* values + */ +void dvb_ca_en50221_camchange_irq(struct dvb_ca_en50221 *pubca, int slot, + int change_type); + +/** + * dvb_ca_en50221_camready_irq - A CAMREADY IRQ has occurred. + * + * @pubca: CA instance. + * @slot: Slot concerned. + */ +void dvb_ca_en50221_camready_irq(struct dvb_ca_en50221 *pubca, int slot); + +/** + * dvb_ca_en50221_frda_irq - An FR or a DA IRQ has occurred. + * + * @ca: CA instance. + * @slot: Slot concerned. + */ +void dvb_ca_en50221_frda_irq(struct dvb_ca_en50221 *ca, int slot); + +/* + * Initialisation/shutdown functions + */ + +/** + * dvb_ca_en50221_init - Initialise a new DVB CA device. + * + * @dvb_adapter: DVB adapter to attach the new CA device to. + * @ca: The dvb_ca instance. + * @flags: Flags describing the CA device (DVB_CA_EN50221_FLAG_*). + * @slot_count: Number of slots supported. + * + * @return 0 on success, nonzero on failure + */ +int dvb_ca_en50221_init(struct dvb_adapter *dvb_adapter, + struct dvb_ca_en50221 *ca, int flags, + int slot_count); + +/** + * dvb_ca_en50221_release - Release a DVB CA device. + * + * @ca: The associated dvb_ca instance. + */ +void dvb_ca_en50221_release(struct dvb_ca_en50221 *ca); + +#endif diff --git a/include/media/dvb_demux.h b/include/media/dvb_demux.h new file mode 100644 index 000000000..3b6aeca7a --- /dev/null +++ b/include/media/dvb_demux.h @@ -0,0 +1,354 @@ +/* + * dvb_demux.h: DVB kernel demux API + * + * Copyright (C) 2000-2001 Marcus Metzler & Ralph Metzler + * for convergence integrated media GmbH + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU Lesser General Public License + * as published by the Free Software Foundation; either version 2.1 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#ifndef _DVB_DEMUX_H_ +#define _DVB_DEMUX_H_ + +#include <linux/time.h> +#include <linux/timer.h> +#include <linux/spinlock.h> +#include <linux/mutex.h> + +#include <media/demux.h> + +/** + * enum dvb_dmx_filter_type - type of demux feed. + * + * @DMX_TYPE_TS: feed is in TS mode. + * @DMX_TYPE_SEC: feed is in Section mode. + */ +enum dvb_dmx_filter_type { + DMX_TYPE_TS, + DMX_TYPE_SEC, +}; + +/** + * enum dvb_dmx_state - state machine for a demux filter. + * + * @DMX_STATE_FREE: indicates that the filter is freed. + * @DMX_STATE_ALLOCATED: indicates that the filter was allocated + * to be used. + * @DMX_STATE_READY: indicates that the filter is ready + * to be used. + * @DMX_STATE_GO: indicates that the filter is running. + */ +enum dvb_dmx_state { + DMX_STATE_FREE, + DMX_STATE_ALLOCATED, + DMX_STATE_READY, + DMX_STATE_GO, +}; + +#define DVB_DEMUX_MASK_MAX 18 + +#define MAX_PID 0x1fff + +#define SPEED_PKTS_INTERVAL 50000 + +/** + * struct dvb_demux_filter - Describes a DVB demux section filter. + * + * @filter: Section filter as defined by &struct dmx_section_filter. + * @maskandmode: logical ``and`` bit mask. + * @maskandnotmode: logical ``and not`` bit mask. + * @doneq: flag that indicates when a filter is ready. + * @next: pointer to the next section filter. + * @feed: &struct dvb_demux_feed pointer. + * @index: index of the used demux filter. + * @state: state of the filter as described by &enum dvb_dmx_state. + * @type: type of the filter as described + * by &enum dvb_dmx_filter_type. + */ + +struct dvb_demux_filter { + struct dmx_section_filter filter; + u8 maskandmode[DMX_MAX_FILTER_SIZE]; + u8 maskandnotmode[DMX_MAX_FILTER_SIZE]; + bool doneq; + + struct dvb_demux_filter *next; + struct dvb_demux_feed *feed; + int index; + enum dvb_dmx_state state; + enum dvb_dmx_filter_type type; + + /* private: used only by av7110 */ + u16 hw_handle; +}; + +/** + * struct dvb_demux_feed - describes a DVB field + * + * @feed: a union describing a digital TV feed. + * Depending on the feed type, it can be either + * @feed.ts or @feed.sec. + * @feed.ts: a &struct dmx_ts_feed pointer. + * For TS feed only. + * @feed.sec: a &struct dmx_section_feed pointer. + * For section feed only. + * @cb: a union describing digital TV callbacks. + * Depending on the feed type, it can be either + * @cb.ts or @cb.sec. + * @cb.ts: a dmx_ts_cb() calback function pointer. + * For TS feed only. + * @cb.sec: a dmx_section_cb() callback function pointer. + * For section feed only. + * @demux: pointer to &struct dvb_demux. + * @priv: private data that can optionally be used by a DVB driver. + * @type: type of the filter, as defined by &enum dvb_dmx_filter_type. + * @state: state of the filter as defined by &enum dvb_dmx_state. + * @pid: PID to be filtered. + * @timeout: feed timeout. + * @filter: pointer to &struct dvb_demux_filter. + * @buffer_flags: Buffer flags used to report discontinuity users via DVB + * memory mapped API, as defined by &enum dmx_buffer_flags. + * @ts_type: type of TS, as defined by &enum ts_filter_type. + * @pes_type: type of PES, as defined by &enum dmx_ts_pes. + * @cc: MPEG-TS packet continuity counter + * @pusi_seen: if true, indicates that a discontinuity was detected. + * it is used to prevent feeding of garbage from previous section. + * @peslen: length of the PES (Packet Elementary Stream). + * @list_head: head for the list of digital TV demux feeds. + * @index: a unique index for each feed. Can be used as hardware + * pid filter index. + */ +struct dvb_demux_feed { + union { + struct dmx_ts_feed ts; + struct dmx_section_feed sec; + } feed; + + union { + dmx_ts_cb ts; + dmx_section_cb sec; + } cb; + + struct dvb_demux *demux; + void *priv; + enum dvb_dmx_filter_type type; + enum dvb_dmx_state state; + u16 pid; + + ktime_t timeout; + struct dvb_demux_filter *filter; + + u32 buffer_flags; + + enum ts_filter_type ts_type; + enum dmx_ts_pes pes_type; + + int cc; + bool pusi_seen; + + u16 peslen; + + struct list_head list_head; + unsigned int index; +}; + +/** + * struct dvb_demux - represents a digital TV demux + * @dmx: embedded &struct dmx_demux with demux capabilities + * and callbacks. + * @priv: private data that can optionally be used by + * a DVB driver. + * @filternum: maximum amount of DVB filters. + * @feednum: maximum amount of DVB feeds. + * @start_feed: callback routine to be called in order to start + * a DVB feed. + * @stop_feed: callback routine to be called in order to stop + * a DVB feed. + * @write_to_decoder: callback routine to be called if the feed is TS and + * it is routed to an A/V decoder, when a new TS packet + * is received. + * Used only on av7110-av.c. + * @check_crc32: callback routine to check CRC. If not initialized, + * dvb_demux will use an internal one. + * @memcopy: callback routine to memcopy received data. + * If not initialized, dvb_demux will default to memcpy(). + * @users: counter for the number of demux opened file descriptors. + * Currently, it is limited to 10 users. + * @filter: pointer to &struct dvb_demux_filter. + * @feed: pointer to &struct dvb_demux_feed. + * @frontend_list: &struct list_head with frontends used by the demux. + * @pesfilter: array of &struct dvb_demux_feed with the PES types + * that will be filtered. + * @pids: list of filtered program IDs. + * @feed_list: &struct list_head with feeds. + * @tsbuf: temporary buffer used internally to store TS packets. + * @tsbufp: temporary buffer index used internally. + * @mutex: pointer to &struct mutex used to protect feed set + * logic. + * @lock: pointer to &spinlock_t, used to protect buffer handling. + * @cnt_storage: buffer used for TS/TEI continuity check. + * @speed_last_time: &ktime_t used for TS speed check. + * @speed_pkts_cnt: packets count used for TS speed check. + */ +struct dvb_demux { + struct dmx_demux dmx; + void *priv; + int filternum; + int feednum; + int (*start_feed)(struct dvb_demux_feed *feed); + int (*stop_feed)(struct dvb_demux_feed *feed); + int (*write_to_decoder)(struct dvb_demux_feed *feed, + const u8 *buf, size_t len); + u32 (*check_crc32)(struct dvb_demux_feed *feed, + const u8 *buf, size_t len); + void (*memcopy)(struct dvb_demux_feed *feed, u8 *dst, + const u8 *src, size_t len); + + int users; +#define MAX_DVB_DEMUX_USERS 10 + struct dvb_demux_filter *filter; + struct dvb_demux_feed *feed; + + struct list_head frontend_list; + + struct dvb_demux_feed *pesfilter[DMX_PES_OTHER]; + u16 pids[DMX_PES_OTHER]; + +#define DMX_MAX_PID 0x2000 + struct list_head feed_list; + u8 tsbuf[204]; + int tsbufp; + + struct mutex mutex; + spinlock_t lock; + + uint8_t *cnt_storage; /* for TS continuity check */ + + ktime_t speed_last_time; /* for TS speed check */ + uint32_t speed_pkts_cnt; /* for TS speed check */ + + /* private: used only on av7110 */ + int playing; + int recording; +}; + +/** + * dvb_dmx_init - initialize a digital TV demux struct. + * + * @demux: &struct dvb_demux to be initialized. + * + * Before being able to register a digital TV demux struct, drivers + * should call this routine. On its typical usage, some fields should + * be initialized at the driver before calling it. + * + * A typical usecase is:: + * + * dvb->demux.dmx.capabilities = + * DMX_TS_FILTERING | DMX_SECTION_FILTERING | + * DMX_MEMORY_BASED_FILTERING; + * dvb->demux.priv = dvb; + * dvb->demux.filternum = 256; + * dvb->demux.feednum = 256; + * dvb->demux.start_feed = driver_start_feed; + * dvb->demux.stop_feed = driver_stop_feed; + * ret = dvb_dmx_init(&dvb->demux); + * if (ret < 0) + * return ret; + */ +int dvb_dmx_init(struct dvb_demux *demux); + +/** + * dvb_dmx_release - releases a digital TV demux internal buffers. + * + * @demux: &struct dvb_demux to be released. + * + * The DVB core internally allocates data at @demux. This routine + * releases those data. Please notice that the struct itelf is not + * released, as it can be embedded on other structs. + */ +void dvb_dmx_release(struct dvb_demux *demux); + +/** + * dvb_dmx_swfilter_packets - use dvb software filter for a buffer with + * multiple MPEG-TS packets with 188 bytes each. + * + * @demux: pointer to &struct dvb_demux + * @buf: buffer with data to be filtered + * @count: number of MPEG-TS packets with size of 188. + * + * The routine will discard a DVB packet that don't start with 0x47. + * + * Use this routine if the DVB demux fills MPEG-TS buffers that are + * already aligned. + * + * NOTE: The @buf size should have size equal to ``count * 188``. + */ +void dvb_dmx_swfilter_packets(struct dvb_demux *demux, const u8 *buf, + size_t count); + +/** + * dvb_dmx_swfilter - use dvb software filter for a buffer with + * multiple MPEG-TS packets with 188 bytes each. + * + * @demux: pointer to &struct dvb_demux + * @buf: buffer with data to be filtered + * @count: number of MPEG-TS packets with size of 188. + * + * If a DVB packet doesn't start with 0x47, it will seek for the first + * byte that starts with 0x47. + * + * Use this routine if the DVB demux fill buffers that may not start with + * a packet start mark (0x47). + * + * NOTE: The @buf size should have size equal to ``count * 188``. + */ +void dvb_dmx_swfilter(struct dvb_demux *demux, const u8 *buf, size_t count); + +/** + * dvb_dmx_swfilter_204 - use dvb software filter for a buffer with + * multiple MPEG-TS packets with 204 bytes each. + * + * @demux: pointer to &struct dvb_demux + * @buf: buffer with data to be filtered + * @count: number of MPEG-TS packets with size of 204. + * + * If a DVB packet doesn't start with 0x47, it will seek for the first + * byte that starts with 0x47. + * + * Use this routine if the DVB demux fill buffers that may not start with + * a packet start mark (0x47). + * + * NOTE: The @buf size should have size equal to ``count * 204``. + */ +void dvb_dmx_swfilter_204(struct dvb_demux *demux, const u8 *buf, + size_t count); + +/** + * dvb_dmx_swfilter_raw - make the raw data available to userspace without + * filtering + * + * @demux: pointer to &struct dvb_demux + * @buf: buffer with data + * @count: number of packets to be passed. The actual size of each packet + * depends on the &dvb_demux->feed->cb.ts logic. + * + * Use it if the driver needs to deliver the raw payload to userspace without + * passing through the kernel demux. That is meant to support some + * delivery systems that aren't based on MPEG-TS. + * + * This function relies on &dvb_demux->feed->cb.ts to actually handle the + * buffer. + */ +void dvb_dmx_swfilter_raw(struct dvb_demux *demux, const u8 *buf, + size_t count); + +#endif /* _DVB_DEMUX_H_ */ diff --git a/include/media/dvb_frontend.h b/include/media/dvb_frontend.h new file mode 100644 index 000000000..0d76fa455 --- /dev/null +++ b/include/media/dvb_frontend.h @@ -0,0 +1,825 @@ +/* + * dvb_frontend.h + * + * The Digital TV Frontend kABI defines a driver-internal interface for + * registering low-level, hardware specific driver to a hardware independent + * frontend layer. + * + * Copyright (C) 2001 convergence integrated media GmbH + * Copyright (C) 2004 convergence GmbH + * + * Written by Ralph Metzler + * Overhauled by Holger Waechtler + * Kernel I2C stuff by Michael Hunold <hunold@convergence.de> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU Lesser General Public License + * as published by the Free Software Foundation; either version 2.1 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + + * You should have received a copy of the GNU Lesser General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + */ + +#ifndef _DVB_FRONTEND_H_ +#define _DVB_FRONTEND_H_ + +#include <linux/types.h> +#include <linux/sched.h> +#include <linux/ioctl.h> +#include <linux/i2c.h> +#include <linux/module.h> +#include <linux/errno.h> +#include <linux/delay.h> +#include <linux/mutex.h> +#include <linux/slab.h> +#include <linux/bitops.h> + +#include <linux/dvb/frontend.h> + +#include <media/dvbdev.h> + +/* + * Maximum number of Delivery systems per frontend. It + * should be smaller or equal to 32 + */ +#define MAX_DELSYS 8 + +/* Helper definitions to be used at frontend drivers */ +#define kHz 1000UL +#define MHz 1000000UL + +/** + * struct dvb_frontend_tune_settings - parameters to adjust frontend tuning + * + * @min_delay_ms: minimum delay for tuning, in ms + * @step_size: step size between two consecutive frequencies + * @max_drift: maximum drift + * + * NOTE: step_size is in Hz, for terrestrial/cable or kHz for satellite + */ +struct dvb_frontend_tune_settings { + int min_delay_ms; + int step_size; + int max_drift; +}; + +struct dvb_frontend; + +/** + * struct dvb_tuner_info - Frontend name and min/max ranges/bandwidths + * + * @name: name of the Frontend + * @frequency_min_hz: minimal frequency supported in Hz + * @frequency_max_hz: maximum frequency supported in Hz + * @frequency_step_hz: frequency step in Hz + * @bandwidth_min: minimal frontend bandwidth supported + * @bandwidth_max: maximum frontend bandwidth supported + * @bandwidth_step: frontend bandwidth step + */ +struct dvb_tuner_info { + char name[128]; + + u32 frequency_min_hz; + u32 frequency_max_hz; + u32 frequency_step_hz; + + u32 bandwidth_min; + u32 bandwidth_max; + u32 bandwidth_step; +}; + +/** + * struct analog_parameters - Parameters to tune into an analog/radio channel + * + * @frequency: Frequency used by analog TV tuner (either in 62.5 kHz step, + * for TV, or 62.5 Hz for radio) + * @mode: Tuner mode, as defined on enum v4l2_tuner_type + * @audmode: Audio mode as defined for the rxsubchans field at videodev2.h, + * e. g. V4L2_TUNER_MODE_* + * @std: TV standard bitmap as defined at videodev2.h, e. g. V4L2_STD_* + * + * Hybrid tuners should be supported by both V4L2 and DVB APIs. This + * struct contains the data that are used by the V4L2 side. To avoid + * dependencies from V4L2 headers, all enums here are declared as integers. + */ +struct analog_parameters { + unsigned int frequency; + unsigned int mode; + unsigned int audmode; + u64 std; +}; + +/** + * enum dvbfe_algo - defines the algorithm used to tune into a channel + * + * @DVBFE_ALGO_HW: Hardware Algorithm - + * Devices that support this algorithm do everything in hardware + * and no software support is needed to handle them. + * Requesting these devices to LOCK is the only thing required, + * device is supposed to do everything in the hardware. + * + * @DVBFE_ALGO_SW: Software Algorithm - + * These are dumb devices, that require software to do everything + * + * @DVBFE_ALGO_CUSTOM: Customizable Agorithm - + * Devices having this algorithm can be customized to have specific + * algorithms in the frontend driver, rather than simply doing a + * software zig-zag. In this case the zigzag maybe hardware assisted + * or it maybe completely done in hardware. In all cases, usage of + * this algorithm, in conjunction with the search and track + * callbacks, utilizes the driver specific algorithm. + * + * @DVBFE_ALGO_RECOVERY: Recovery Algorithm - + * These devices have AUTO recovery capabilities from LOCK failure + */ +enum dvbfe_algo { + DVBFE_ALGO_HW = BIT(0), + DVBFE_ALGO_SW = BIT(1), + DVBFE_ALGO_CUSTOM = BIT(2), + DVBFE_ALGO_RECOVERY = BIT(31), +}; + +/** + * enum dvbfe_search - search callback possible return status + * + * @DVBFE_ALGO_SEARCH_SUCCESS: + * The frontend search algorithm completed and returned successfully + * + * @DVBFE_ALGO_SEARCH_ASLEEP: + * The frontend search algorithm is sleeping + * + * @DVBFE_ALGO_SEARCH_FAILED: + * The frontend search for a signal failed + * + * @DVBFE_ALGO_SEARCH_INVALID: + * The frontend search algorithm was probably supplied with invalid + * parameters and the search is an invalid one + * + * @DVBFE_ALGO_SEARCH_ERROR: + * The frontend search algorithm failed due to some error + * + * @DVBFE_ALGO_SEARCH_AGAIN: + * The frontend search algorithm was requested to search again + */ +enum dvbfe_search { + DVBFE_ALGO_SEARCH_SUCCESS = BIT(0), + DVBFE_ALGO_SEARCH_ASLEEP = BIT(1), + DVBFE_ALGO_SEARCH_FAILED = BIT(2), + DVBFE_ALGO_SEARCH_INVALID = BIT(3), + DVBFE_ALGO_SEARCH_AGAIN = BIT(4), + DVBFE_ALGO_SEARCH_ERROR = BIT(31), +}; + +/** + * struct dvb_tuner_ops - Tuner information and callbacks + * + * @info: embedded &struct dvb_tuner_info with tuner properties + * @release: callback function called when frontend is detached. + * drivers should free any allocated memory. + * @init: callback function used to initialize the tuner device. + * @sleep: callback function used to put the tuner to sleep. + * @suspend: callback function used to inform that the Kernel will + * suspend. + * @resume: callback function used to inform that the Kernel is + * resuming from suspend. + * @set_params: callback function used to inform the tuner to tune + * into a digital TV channel. The properties to be used + * are stored at &struct dvb_frontend.dtv_property_cache. + * The tuner demod can change the parameters to reflect + * the changes needed for the channel to be tuned, and + * update statistics. This is the recommended way to set + * the tuner parameters and should be used on newer + * drivers. + * @set_analog_params: callback function used to tune into an analog TV + * channel on hybrid tuners. It passes @analog_parameters + * to the driver. + * @set_config: callback function used to send some tuner-specific + * parameters. + * @get_frequency: get the actual tuned frequency + * @get_bandwidth: get the bandwidth used by the low pass filters + * @get_if_frequency: get the Intermediate Frequency, in Hz. For baseband, + * should return 0. + * @get_status: returns the frontend lock status + * @get_rf_strength: returns the RF signal strength. Used mostly to support + * analog TV and radio. Digital TV should report, instead, + * via DVBv5 API (&struct dvb_frontend.dtv_property_cache). + * @get_afc: Used only by analog TV core. Reports the frequency + * drift due to AFC. + * @calc_regs: callback function used to pass register data settings + * for simple tuners. Shouldn't be used on newer drivers. + * @set_frequency: Set a new frequency. Shouldn't be used on newer drivers. + * @set_bandwidth: Set a new frequency. Shouldn't be used on newer drivers. + * + * NOTE: frequencies used on @get_frequency and @set_frequency are in Hz for + * terrestrial/cable or kHz for satellite. + * + */ +struct dvb_tuner_ops { + + struct dvb_tuner_info info; + + void (*release)(struct dvb_frontend *fe); + int (*init)(struct dvb_frontend *fe); + int (*sleep)(struct dvb_frontend *fe); + int (*suspend)(struct dvb_frontend *fe); + int (*resume)(struct dvb_frontend *fe); + + /* This is the recommended way to set the tuner */ + int (*set_params)(struct dvb_frontend *fe); + int (*set_analog_params)(struct dvb_frontend *fe, struct analog_parameters *p); + + int (*set_config)(struct dvb_frontend *fe, void *priv_cfg); + + int (*get_frequency)(struct dvb_frontend *fe, u32 *frequency); + int (*get_bandwidth)(struct dvb_frontend *fe, u32 *bandwidth); + int (*get_if_frequency)(struct dvb_frontend *fe, u32 *frequency); + +#define TUNER_STATUS_LOCKED 1 +#define TUNER_STATUS_STEREO 2 + int (*get_status)(struct dvb_frontend *fe, u32 *status); + int (*get_rf_strength)(struct dvb_frontend *fe, u16 *strength); + int (*get_afc)(struct dvb_frontend *fe, s32 *afc); + + /* + * This is support for demods like the mt352 - fills out the supplied + * buffer with what to write. + * + * Don't use on newer drivers. + */ + int (*calc_regs)(struct dvb_frontend *fe, u8 *buf, int buf_len); + + /* + * These are provided separately from set_params in order to + * facilitate silicon tuners which require sophisticated tuning loops, + * controlling each parameter separately. + * + * Don't use on newer drivers. + */ + int (*set_frequency)(struct dvb_frontend *fe, u32 frequency); + int (*set_bandwidth)(struct dvb_frontend *fe, u32 bandwidth); +}; + +/** + * struct analog_demod_info - Information struct for analog TV part of the demod + * + * @name: Name of the analog TV demodulator + */ +struct analog_demod_info { + char *name; +}; + +/** + * struct analog_demod_ops - Demodulation information and callbacks for + * analog TV and radio + * + * @info: pointer to struct analog_demod_info + * @set_params: callback function used to inform the demod to set the + * demodulator parameters needed to decode an analog or + * radio channel. The properties are passed via + * &struct analog_params. + * @has_signal: returns 0xffff if has signal, or 0 if it doesn't. + * @get_afc: Used only by analog TV core. Reports the frequency + * drift due to AFC. + * @tuner_status: callback function that returns tuner status bits, e. g. + * %TUNER_STATUS_LOCKED and %TUNER_STATUS_STEREO. + * @standby: set the tuner to standby mode. + * @release: callback function called when frontend is detached. + * drivers should free any allocated memory. + * @i2c_gate_ctrl: controls the I2C gate. Newer drivers should use I2C + * mux support instead. + * @set_config: callback function used to send some tuner-specific + * parameters. + */ +struct analog_demod_ops { + + struct analog_demod_info info; + + void (*set_params)(struct dvb_frontend *fe, + struct analog_parameters *params); + int (*has_signal)(struct dvb_frontend *fe, u16 *signal); + int (*get_afc)(struct dvb_frontend *fe, s32 *afc); + void (*tuner_status)(struct dvb_frontend *fe); + void (*standby)(struct dvb_frontend *fe); + void (*release)(struct dvb_frontend *fe); + int (*i2c_gate_ctrl)(struct dvb_frontend *fe, int enable); + + /** This is to allow setting tuner-specific configuration */ + int (*set_config)(struct dvb_frontend *fe, void *priv_cfg); +}; + +struct dtv_frontend_properties; + +/** + * struct dvb_frontend_internal_info - Frontend properties and capabilities + * + * @name: Name of the frontend + * @frequency_min_hz: Minimal frequency supported by the frontend. + * @frequency_max_hz: Minimal frequency supported by the frontend. + * @frequency_stepsize_hz: All frequencies are multiple of this value. + * @frequency_tolerance_hz: Frequency tolerance. + * @symbol_rate_min: Minimal symbol rate, in bauds + * (for Cable/Satellite systems). + * @symbol_rate_max: Maximal symbol rate, in bauds + * (for Cable/Satellite systems). + * @symbol_rate_tolerance: Maximal symbol rate tolerance, in ppm + * (for Cable/Satellite systems). + * @caps: Capabilities supported by the frontend, + * as specified in &enum fe_caps. + */ +struct dvb_frontend_internal_info { + char name[128]; + u32 frequency_min_hz; + u32 frequency_max_hz; + u32 frequency_stepsize_hz; + u32 frequency_tolerance_hz; + u32 symbol_rate_min; + u32 symbol_rate_max; + u32 symbol_rate_tolerance; + enum fe_caps caps; +}; + +/** + * struct dvb_frontend_ops - Demodulation information and callbacks for + * ditialt TV + * + * @info: embedded &struct dvb_tuner_info with tuner properties + * @delsys: Delivery systems supported by the frontend + * @detach: callback function called when frontend is detached. + * drivers should clean up, but not yet free the &struct + * dvb_frontend allocation. + * @release: callback function called when frontend is ready to be + * freed. + * drivers should free any allocated memory. + * @release_sec: callback function requesting that the Satellite Equipment + * Control (SEC) driver to release and free any memory + * allocated by the driver. + * @init: callback function used to initialize the tuner device. + * @sleep: callback function used to put the tuner to sleep. + * @write: callback function used by some demod legacy drivers to + * allow other drivers to write data into their registers. + * Should not be used on new drivers. + * @tune: callback function used by demod drivers that use + * @DVBFE_ALGO_HW to tune into a frequency. + * @get_frontend_algo: returns the desired hardware algorithm. + * @set_frontend: callback function used to inform the demod to set the + * parameters for demodulating a digital TV channel. + * The properties to be used are stored at &struct + * dvb_frontend.dtv_property_cache. The demod can change + * the parameters to reflect the changes needed for the + * channel to be decoded, and update statistics. + * @get_tune_settings: callback function + * @get_frontend: callback function used to inform the parameters + * actuall in use. The properties to be used are stored at + * &struct dvb_frontend.dtv_property_cache and update + * statistics. Please notice that it should not return + * an error code if the statistics are not available + * because the demog is not locked. + * @read_status: returns the locking status of the frontend. + * @read_ber: legacy callback function to return the bit error rate. + * Newer drivers should provide such info via DVBv5 API, + * e. g. @set_frontend;/@get_frontend, implementing this + * callback only if DVBv3 API compatibility is wanted. + * @read_signal_strength: legacy callback function to return the signal + * strength. Newer drivers should provide such info via + * DVBv5 API, e. g. @set_frontend/@get_frontend, + * implementing this callback only if DVBv3 API + * compatibility is wanted. + * @read_snr: legacy callback function to return the Signal/Noise + * rate. Newer drivers should provide such info via + * DVBv5 API, e. g. @set_frontend/@get_frontend, + * implementing this callback only if DVBv3 API + * compatibility is wanted. + * @read_ucblocks: legacy callback function to return the Uncorrected Error + * Blocks. Newer drivers should provide such info via + * DVBv5 API, e. g. @set_frontend/@get_frontend, + * implementing this callback only if DVBv3 API + * compatibility is wanted. + * @diseqc_reset_overload: callback function to implement the + * FE_DISEQC_RESET_OVERLOAD() ioctl (only Satellite) + * @diseqc_send_master_cmd: callback function to implement the + * FE_DISEQC_SEND_MASTER_CMD() ioctl (only Satellite). + * @diseqc_recv_slave_reply: callback function to implement the + * FE_DISEQC_RECV_SLAVE_REPLY() ioctl (only Satellite) + * @diseqc_send_burst: callback function to implement the + * FE_DISEQC_SEND_BURST() ioctl (only Satellite). + * @set_tone: callback function to implement the + * FE_SET_TONE() ioctl (only Satellite). + * @set_voltage: callback function to implement the + * FE_SET_VOLTAGE() ioctl (only Satellite). + * @enable_high_lnb_voltage: callback function to implement the + * FE_ENABLE_HIGH_LNB_VOLTAGE() ioctl (only Satellite). + * @dishnetwork_send_legacy_command: callback function to implement the + * FE_DISHNETWORK_SEND_LEGACY_CMD() ioctl (only Satellite). + * Drivers should not use this, except when the DVB + * core emulation fails to provide proper support (e.g. + * if @set_voltage takes more than 8ms to work), and + * when backward compatibility with this legacy API is + * required. + * @i2c_gate_ctrl: controls the I2C gate. Newer drivers should use I2C + * mux support instead. + * @ts_bus_ctrl: callback function used to take control of the TS bus. + * @set_lna: callback function to power on/off/auto the LNA. + * @search: callback function used on some custom algo search algos. + * @tuner_ops: pointer to &struct dvb_tuner_ops + * @analog_ops: pointer to &struct analog_demod_ops + */ +struct dvb_frontend_ops { + struct dvb_frontend_internal_info info; + + u8 delsys[MAX_DELSYS]; + + void (*detach)(struct dvb_frontend *fe); + void (*release)(struct dvb_frontend* fe); + void (*release_sec)(struct dvb_frontend* fe); + + int (*init)(struct dvb_frontend* fe); + int (*sleep)(struct dvb_frontend* fe); + + int (*write)(struct dvb_frontend* fe, const u8 buf[], int len); + + /* if this is set, it overrides the default swzigzag */ + int (*tune)(struct dvb_frontend* fe, + bool re_tune, + unsigned int mode_flags, + unsigned int *delay, + enum fe_status *status); + + /* get frontend tuning algorithm from the module */ + enum dvbfe_algo (*get_frontend_algo)(struct dvb_frontend *fe); + + /* these two are only used for the swzigzag code */ + int (*set_frontend)(struct dvb_frontend *fe); + int (*get_tune_settings)(struct dvb_frontend* fe, struct dvb_frontend_tune_settings* settings); + + int (*get_frontend)(struct dvb_frontend *fe, + struct dtv_frontend_properties *props); + + int (*read_status)(struct dvb_frontend *fe, enum fe_status *status); + int (*read_ber)(struct dvb_frontend* fe, u32* ber); + int (*read_signal_strength)(struct dvb_frontend* fe, u16* strength); + int (*read_snr)(struct dvb_frontend* fe, u16* snr); + int (*read_ucblocks)(struct dvb_frontend* fe, u32* ucblocks); + + int (*diseqc_reset_overload)(struct dvb_frontend* fe); + int (*diseqc_send_master_cmd)(struct dvb_frontend* fe, struct dvb_diseqc_master_cmd* cmd); + int (*diseqc_recv_slave_reply)(struct dvb_frontend* fe, struct dvb_diseqc_slave_reply* reply); + int (*diseqc_send_burst)(struct dvb_frontend *fe, + enum fe_sec_mini_cmd minicmd); + int (*set_tone)(struct dvb_frontend *fe, enum fe_sec_tone_mode tone); + int (*set_voltage)(struct dvb_frontend *fe, + enum fe_sec_voltage voltage); + int (*enable_high_lnb_voltage)(struct dvb_frontend* fe, long arg); + int (*dishnetwork_send_legacy_command)(struct dvb_frontend* fe, unsigned long cmd); + int (*i2c_gate_ctrl)(struct dvb_frontend* fe, int enable); + int (*ts_bus_ctrl)(struct dvb_frontend* fe, int acquire); + int (*set_lna)(struct dvb_frontend *); + + /* + * These callbacks are for devices that implement their own + * tuning algorithms, rather than a simple swzigzag + */ + enum dvbfe_search (*search)(struct dvb_frontend *fe); + + struct dvb_tuner_ops tuner_ops; + struct analog_demod_ops analog_ops; +}; + +#ifdef __DVB_CORE__ +#define MAX_EVENT 8 + +/* Used only internally at dvb_frontend.c */ +struct dvb_fe_events { + struct dvb_frontend_event events[MAX_EVENT]; + int eventw; + int eventr; + int overflow; + wait_queue_head_t wait_queue; + struct mutex mtx; +}; +#endif + +/** + * struct dtv_frontend_properties - contains a list of properties that are + * specific to a digital TV standard. + * + * @frequency: frequency in Hz for terrestrial/cable or in kHz for + * Satellite + * @modulation: Frontend modulation type + * @voltage: SEC voltage (only Satellite) + * @sectone: SEC tone mode (only Satellite) + * @inversion: Spectral inversion + * @fec_inner: Forward error correction inner Code Rate + * @transmission_mode: Transmission Mode + * @bandwidth_hz: Bandwidth, in Hz. A zero value means that userspace + * wants to autodetect. + * @guard_interval: Guard Interval + * @hierarchy: Hierarchy + * @symbol_rate: Symbol Rate + * @code_rate_HP: high priority stream code rate + * @code_rate_LP: low priority stream code rate + * @pilot: Enable/disable/autodetect pilot tones + * @rolloff: Rolloff factor (alpha) + * @delivery_system: FE delivery system (e. g. digital TV standard) + * @interleaving: interleaving + * @isdbt_partial_reception: ISDB-T partial reception (only ISDB standard) + * @isdbt_sb_mode: ISDB-T Sound Broadcast (SB) mode (only ISDB standard) + * @isdbt_sb_subchannel: ISDB-T SB subchannel (only ISDB standard) + * @isdbt_sb_segment_idx: ISDB-T SB segment index (only ISDB standard) + * @isdbt_sb_segment_count: ISDB-T SB segment count (only ISDB standard) + * @isdbt_layer_enabled: ISDB Layer enabled (only ISDB standard) + * @layer: ISDB per-layer data (only ISDB standard) + * @layer.segment_count: Segment Count; + * @layer.fec: per layer code rate; + * @layer.modulation: per layer modulation; + * @layer.interleaving: per layer interleaving. + * @stream_id: If different than zero, enable substream filtering, if + * hardware supports (DVB-S2 and DVB-T2). + * @scrambling_sequence_index: Carries the index of the DVB-S2 physical layer + * scrambling sequence. + * @atscmh_fic_ver: Version number of the FIC (Fast Information Channel) + * signaling data (only ATSC-M/H) + * @atscmh_parade_id: Parade identification number (only ATSC-M/H) + * @atscmh_nog: Number of MH groups per MH subframe for a designated + * parade (only ATSC-M/H) + * @atscmh_tnog: Total number of MH groups including all MH groups + * belonging to all MH parades in one MH subframe + * (only ATSC-M/H) + * @atscmh_sgn: Start group number (only ATSC-M/H) + * @atscmh_prc: Parade repetition cycle (only ATSC-M/H) + * @atscmh_rs_frame_mode: Reed Solomon (RS) frame mode (only ATSC-M/H) + * @atscmh_rs_frame_ensemble: RS frame ensemble (only ATSC-M/H) + * @atscmh_rs_code_mode_pri: RS code mode pri (only ATSC-M/H) + * @atscmh_rs_code_mode_sec: RS code mode sec (only ATSC-M/H) + * @atscmh_sccc_block_mode: Series Concatenated Convolutional Code (SCCC) + * Block Mode (only ATSC-M/H) + * @atscmh_sccc_code_mode_a: SCCC code mode A (only ATSC-M/H) + * @atscmh_sccc_code_mode_b: SCCC code mode B (only ATSC-M/H) + * @atscmh_sccc_code_mode_c: SCCC code mode C (only ATSC-M/H) + * @atscmh_sccc_code_mode_d: SCCC code mode D (only ATSC-M/H) + * @lna: Power ON/OFF/AUTO the Linear Now-noise Amplifier (LNA) + * @strength: DVBv5 API statistics: Signal Strength + * @cnr: DVBv5 API statistics: Signal to Noise ratio of the + * (main) carrier + * @pre_bit_error: DVBv5 API statistics: pre-Viterbi bit error count + * @pre_bit_count: DVBv5 API statistics: pre-Viterbi bit count + * @post_bit_error: DVBv5 API statistics: post-Viterbi bit error count + * @post_bit_count: DVBv5 API statistics: post-Viterbi bit count + * @block_error: DVBv5 API statistics: block error count + * @block_count: DVBv5 API statistics: block count + * + * NOTE: derivated statistics like Uncorrected Error blocks (UCE) are + * calculated on userspace. + * + * Only a subset of the properties are needed for a given delivery system. + * For more info, consult the media_api.html with the documentation of the + * Userspace API. + */ +struct dtv_frontend_properties { + u32 frequency; + enum fe_modulation modulation; + + enum fe_sec_voltage voltage; + enum fe_sec_tone_mode sectone; + enum fe_spectral_inversion inversion; + enum fe_code_rate fec_inner; + enum fe_transmit_mode transmission_mode; + u32 bandwidth_hz; /* 0 = AUTO */ + enum fe_guard_interval guard_interval; + enum fe_hierarchy hierarchy; + u32 symbol_rate; + enum fe_code_rate code_rate_HP; + enum fe_code_rate code_rate_LP; + + enum fe_pilot pilot; + enum fe_rolloff rolloff; + + enum fe_delivery_system delivery_system; + + enum fe_interleaving interleaving; + + /* ISDB-T specifics */ + u8 isdbt_partial_reception; + u8 isdbt_sb_mode; + u8 isdbt_sb_subchannel; + u32 isdbt_sb_segment_idx; + u32 isdbt_sb_segment_count; + u8 isdbt_layer_enabled; + struct { + u8 segment_count; + enum fe_code_rate fec; + enum fe_modulation modulation; + u8 interleaving; + } layer[3]; + + /* Multistream specifics */ + u32 stream_id; + + /* Physical Layer Scrambling specifics */ + u32 scrambling_sequence_index; + + /* ATSC-MH specifics */ + u8 atscmh_fic_ver; + u8 atscmh_parade_id; + u8 atscmh_nog; + u8 atscmh_tnog; + u8 atscmh_sgn; + u8 atscmh_prc; + + u8 atscmh_rs_frame_mode; + u8 atscmh_rs_frame_ensemble; + u8 atscmh_rs_code_mode_pri; + u8 atscmh_rs_code_mode_sec; + u8 atscmh_sccc_block_mode; + u8 atscmh_sccc_code_mode_a; + u8 atscmh_sccc_code_mode_b; + u8 atscmh_sccc_code_mode_c; + u8 atscmh_sccc_code_mode_d; + + u32 lna; + + /* statistics data */ + struct dtv_fe_stats strength; + struct dtv_fe_stats cnr; + struct dtv_fe_stats pre_bit_error; + struct dtv_fe_stats pre_bit_count; + struct dtv_fe_stats post_bit_error; + struct dtv_fe_stats post_bit_count; + struct dtv_fe_stats block_error; + struct dtv_fe_stats block_count; +}; + +#define DVB_FE_NO_EXIT 0 +#define DVB_FE_NORMAL_EXIT 1 +#define DVB_FE_DEVICE_REMOVED 2 +#define DVB_FE_DEVICE_RESUME 3 + +/** + * struct dvb_frontend - Frontend structure to be used on drivers. + * + * @refcount: refcount to keep track of &struct dvb_frontend + * references + * @ops: embedded &struct dvb_frontend_ops + * @dvb: pointer to &struct dvb_adapter + * @demodulator_priv: demod private data + * @tuner_priv: tuner private data + * @frontend_priv: frontend private data + * @sec_priv: SEC private data + * @analog_demod_priv: Analog demod private data + * @dtv_property_cache: embedded &struct dtv_frontend_properties + * @callback: callback function used on some drivers to call + * either the tuner or the demodulator. + * @id: Frontend ID + * @exit: Used to inform the DVB core that the frontend + * thread should exit (usually, means that the hardware + * got disconnected. + */ + +struct dvb_frontend { + struct kref refcount; + struct dvb_frontend_ops ops; + struct dvb_adapter *dvb; + void *demodulator_priv; + void *tuner_priv; + void *frontend_priv; + void *sec_priv; + void *analog_demod_priv; + struct dtv_frontend_properties dtv_property_cache; +#define DVB_FRONTEND_COMPONENT_TUNER 0 +#define DVB_FRONTEND_COMPONENT_DEMOD 1 + int (*callback)(void *adapter_priv, int component, int cmd, int arg); + int id; + unsigned int exit; +}; + +/** + * dvb_register_frontend() - Registers a DVB frontend at the adapter + * + * @dvb: pointer to &struct dvb_adapter + * @fe: pointer to &struct dvb_frontend + * + * Allocate and initialize the private data needed by the frontend core to + * manage the frontend and calls dvb_register_device() to register a new + * frontend. It also cleans the property cache that stores the frontend + * parameters and selects the first available delivery system. + */ +int dvb_register_frontend(struct dvb_adapter *dvb, + struct dvb_frontend *fe); + +/** + * dvb_unregister_frontend() - Unregisters a DVB frontend + * + * @fe: pointer to &struct dvb_frontend + * + * Stops the frontend kthread, calls dvb_unregister_device() and frees the + * private frontend data allocated by dvb_register_frontend(). + * + * NOTE: This function doesn't frees the memory allocated by the demod, + * by the SEC driver and by the tuner. In order to free it, an explicit call to + * dvb_frontend_detach() is needed, after calling this function. + */ +int dvb_unregister_frontend(struct dvb_frontend *fe); + +/** + * dvb_frontend_detach() - Detaches and frees frontend specific data + * + * @fe: pointer to &struct dvb_frontend + * + * This function should be called after dvb_unregister_frontend(). It + * calls the SEC, tuner and demod release functions: + * &dvb_frontend_ops.release_sec, &dvb_frontend_ops.tuner_ops.release, + * &dvb_frontend_ops.analog_ops.release and &dvb_frontend_ops.release. + * + * If the driver is compiled with %CONFIG_MEDIA_ATTACH, it also decreases + * the module reference count, needed to allow userspace to remove the + * previously used DVB frontend modules. + */ +void dvb_frontend_detach(struct dvb_frontend *fe); + +/** + * dvb_frontend_suspend() - Suspends a Digital TV frontend + * + * @fe: pointer to &struct dvb_frontend + * + * This function prepares a Digital TV frontend to suspend. + * + * In order to prepare the tuner to suspend, if + * &dvb_frontend_ops.tuner_ops.suspend\(\) is available, it calls it. Otherwise, + * it will call &dvb_frontend_ops.tuner_ops.sleep\(\), if available. + * + * It will also call &dvb_frontend_ops.sleep\(\) to put the demod to suspend. + * + * The drivers should also call dvb_frontend_suspend\(\) as part of their + * handler for the &device_driver.suspend\(\). + */ +int dvb_frontend_suspend(struct dvb_frontend *fe); + +/** + * dvb_frontend_resume() - Resumes a Digital TV frontend + * + * @fe: pointer to &struct dvb_frontend + * + * This function resumes the usual operation of the tuner after resume. + * + * In order to resume the frontend, it calls the demod &dvb_frontend_ops.init\(\). + * + * If &dvb_frontend_ops.tuner_ops.resume\(\) is available, It, it calls it. + * Otherwise,t will call &dvb_frontend_ops.tuner_ops.init\(\), if available. + * + * Once tuner and demods are resumed, it will enforce that the SEC voltage and + * tone are restored to their previous values and wake up the frontend's + * kthread in order to retune the frontend. + * + * The drivers should also call dvb_frontend_resume() as part of their + * handler for the &device_driver.resume\(\). + */ +int dvb_frontend_resume(struct dvb_frontend *fe); + +/** + * dvb_frontend_reinitialise() - forces a reinitialisation at the frontend + * + * @fe: pointer to &struct dvb_frontend + * + * Calls &dvb_frontend_ops.init\(\) and &dvb_frontend_ops.tuner_ops.init\(\), + * and resets SEC tone and voltage (for Satellite systems). + * + * NOTE: Currently, this function is used only by one driver (budget-av). + * It seems to be due to address some special issue with that specific + * frontend. + */ +void dvb_frontend_reinitialise(struct dvb_frontend *fe); + +/** + * dvb_frontend_sleep_until() - Sleep for the amount of time given by + * add_usec parameter + * + * @waketime: pointer to &struct ktime_t + * @add_usec: time to sleep, in microseconds + * + * This function is used to measure the time required for the + * FE_DISHNETWORK_SEND_LEGACY_CMD() ioctl to work. It needs to be as precise + * as possible, as it affects the detection of the dish tone command at the + * satellite subsystem. + * + * Its used internally by the DVB frontend core, in order to emulate + * FE_DISHNETWORK_SEND_LEGACY_CMD() using the &dvb_frontend_ops.set_voltage\(\) + * callback. + * + * NOTE: it should not be used at the drivers, as the emulation for the + * legacy callback is provided by the Kernel. The only situation where this + * should be at the drivers is when there are some bugs at the hardware that + * would prevent the core emulation to work. On such cases, the driver would + * be writing a &dvb_frontend_ops.dishnetwork_send_legacy_command\(\) and + * calling this function directly. + */ +void dvb_frontend_sleep_until(ktime_t *waketime, u32 add_usec); + +#endif diff --git a/include/media/dvb_math.h b/include/media/dvb_math.h new file mode 100644 index 000000000..8690ec429 --- /dev/null +++ b/include/media/dvb_math.h @@ -0,0 +1,66 @@ +/* + * dvb-math provides some complex fixed-point math + * operations shared between the dvb related stuff + * + * Copyright (C) 2006 Christoph Pfister (christophpfister@gmail.com) + * + * This library is free software; you can redistribute it and/or modify + * it under the terms of the GNU Lesser General Public License as + * published by the Free Software Foundation; either version 2.1 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU Lesser General Public License for more details. + */ + +#ifndef __DVB_MATH_H +#define __DVB_MATH_H + +#include <linux/types.h> + +/** + * intlog2 - computes log2 of a value; the result is shifted left by 24 bits + * + * @value: The value (must be != 0) + * + * to use rational values you can use the following method: + * + * intlog2(value) = intlog2(value * 2^x) - x * 2^24 + * + * Some usecase examples: + * + * intlog2(8) will give 3 << 24 = 3 * 2^24 + * + * intlog2(9) will give 3 << 24 + ... = 3.16... * 2^24 + * + * intlog2(1.5) = intlog2(3) - 2^24 = 0.584... * 2^24 + * + * + * return: log2(value) * 2^24 + */ +extern unsigned int intlog2(u32 value); + +/** + * intlog10 - computes log10 of a value; the result is shifted left by 24 bits + * + * @value: The value (must be != 0) + * + * to use rational values you can use the following method: + * + * intlog10(value) = intlog10(value * 10^x) - x * 2^24 + * + * An usecase example: + * + * intlog10(1000) will give 3 << 24 = 3 * 2^24 + * + * due to the implementation intlog10(1000) might be not exactly 3 * 2^24 + * + * look at intlog2 for similar examples + * + * return: log10(value) * 2^24 + */ +extern unsigned int intlog10(u32 value); + +#endif diff --git a/include/media/dvb_net.h b/include/media/dvb_net.h new file mode 100644 index 000000000..cc01dffcc --- /dev/null +++ b/include/media/dvb_net.h @@ -0,0 +1,97 @@ +/* + * dvb_net.h + * + * Copyright (C) 2001 Ralph Metzler for convergence integrated media GmbH + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU Lesser General Public License + * as published by the Free Software Foundation; either version 2.1 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#ifndef _DVB_NET_H_ +#define _DVB_NET_H_ + +#include <linux/module.h> +#include <linux/netdevice.h> +#include <linux/inetdevice.h> +#include <linux/etherdevice.h> +#include <linux/skbuff.h> + +#include <media/dvbdev.h> + +#define DVB_NET_DEVICES_MAX 10 + +#ifdef CONFIG_DVB_NET + +/** + * struct dvb_net - describes a DVB network interface + * + * @dvbdev: pointer to &struct dvb_device. + * @device: array of pointers to &struct net_device. + * @state: array of integers to each net device. A value + * different than zero means that the interface is + * in usage. + * @exit: flag to indicate when the device is being removed. + * @demux: pointer to &struct dmx_demux. + * @ioctl_mutex: protect access to this struct. + * @remove_mutex: mutex that avoids a race condition between a callback + * called when the hardware is disconnected and the + * file_operations of dvb_net. + * + * Currently, the core supports up to %DVB_NET_DEVICES_MAX (10) network + * devices. + */ + +struct dvb_net { + struct dvb_device *dvbdev; + struct net_device *device[DVB_NET_DEVICES_MAX]; + int state[DVB_NET_DEVICES_MAX]; + unsigned int exit:1; + struct dmx_demux *demux; + struct mutex ioctl_mutex; + struct mutex remove_mutex; +}; + +/** + * dvb_net_init - nitializes a digital TV network device and registers it. + * + * @adap: pointer to &struct dvb_adapter. + * @dvbnet: pointer to &struct dvb_net. + * @dmxdemux: pointer to &struct dmx_demux. + */ +int dvb_net_init(struct dvb_adapter *adap, struct dvb_net *dvbnet, + struct dmx_demux *dmxdemux); + +/** + * dvb_net_release - releases a digital TV network device and unregisters it. + * + * @dvbnet: pointer to &struct dvb_net. + */ +void dvb_net_release(struct dvb_net *dvbnet); + +#else + +struct dvb_net { + struct dvb_device *dvbdev; +}; + +static inline void dvb_net_release(struct dvb_net *dvbnet) +{ +} + +static inline int dvb_net_init(struct dvb_adapter *adap, + struct dvb_net *dvbnet, struct dmx_demux *dmx) +{ + return 0; +} + +#endif /* ifdef CONFIG_DVB_NET */ + +#endif diff --git a/include/media/dvb_ringbuffer.h b/include/media/dvb_ringbuffer.h new file mode 100644 index 000000000..8ed6bcc3a --- /dev/null +++ b/include/media/dvb_ringbuffer.h @@ -0,0 +1,280 @@ +/* + * + * dvb_ringbuffer.h: ring buffer implementation for the dvb driver + * + * Copyright (C) 2003 Oliver Endriss + * Copyright (C) 2004 Andrew de Quincey + * + * based on code originally found in av7110.c & dvb_ci.c: + * Copyright (C) 1999-2003 Ralph Metzler & Marcus Metzler + * for convergence integrated media GmbH + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU Lesser General Public License + * as published by the Free Software Foundation; either version 2.1 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU Lesser General Public License for more details. + */ + +#ifndef _DVB_RINGBUFFER_H_ +#define _DVB_RINGBUFFER_H_ + +#include <linux/spinlock.h> +#include <linux/wait.h> + +/** + * struct dvb_ringbuffer - Describes a ring buffer used at DVB framework + * + * @data: Area were the ringbuffer data is written + * @size: size of the ringbuffer + * @pread: next position to read + * @pwrite: next position to write + * @error: used by ringbuffer clients to indicate that an error happened. + * @queue: Wait queue used by ringbuffer clients to indicate when buffer + * was filled + * @lock: Spinlock used to protect the ringbuffer + */ +struct dvb_ringbuffer { + u8 *data; + ssize_t size; + ssize_t pread; + ssize_t pwrite; + int error; + + wait_queue_head_t queue; + spinlock_t lock; +}; + +#define DVB_RINGBUFFER_PKTHDRSIZE 3 + +/** + * dvb_ringbuffer_init - initialize ring buffer, lock and queue + * + * @rbuf: pointer to struct dvb_ringbuffer + * @data: pointer to the buffer where the data will be stored + * @len: bytes from ring buffer into @buf + */ +extern void dvb_ringbuffer_init(struct dvb_ringbuffer *rbuf, void *data, + size_t len); + +/** + * dvb_ringbuffer_empty - test whether buffer is empty + * + * @rbuf: pointer to struct dvb_ringbuffer + */ +extern int dvb_ringbuffer_empty(struct dvb_ringbuffer *rbuf); + +/** + * dvb_ringbuffer_free - returns the number of free bytes in the buffer + * + * @rbuf: pointer to struct dvb_ringbuffer + * + * Return: number of free bytes in the buffer + */ +extern ssize_t dvb_ringbuffer_free(struct dvb_ringbuffer *rbuf); + +/** + * dvb_ringbuffer_avail - returns the number of bytes waiting in the buffer + * + * @rbuf: pointer to struct dvb_ringbuffer + * + * Return: number of bytes waiting in the buffer + */ +extern ssize_t dvb_ringbuffer_avail(struct dvb_ringbuffer *rbuf); + +/** + * dvb_ringbuffer_reset - resets the ringbuffer to initial state + * + * @rbuf: pointer to struct dvb_ringbuffer + * + * Resets the read and write pointers to zero and flush the buffer. + * + * This counts as a read and write operation + */ +extern void dvb_ringbuffer_reset(struct dvb_ringbuffer *rbuf); + +/* + * read routines & macros + */ + +/** + * dvb_ringbuffer_flush - flush buffer + * + * @rbuf: pointer to struct dvb_ringbuffer + */ +extern void dvb_ringbuffer_flush(struct dvb_ringbuffer *rbuf); + +/** + * dvb_ringbuffer_flush_spinlock_wakeup- flush buffer protected by spinlock + * and wake-up waiting task(s) + * + * @rbuf: pointer to struct dvb_ringbuffer + */ +extern void dvb_ringbuffer_flush_spinlock_wakeup(struct dvb_ringbuffer *rbuf); + +/** + * DVB_RINGBUFFER_PEEK - peek at byte @offs in the buffer + * + * @rbuf: pointer to struct dvb_ringbuffer + * @offs: offset inside the ringbuffer + */ +#define DVB_RINGBUFFER_PEEK(rbuf, offs) \ + ((rbuf)->data[((rbuf)->pread + (offs)) % (rbuf)->size]) + +/** + * DVB_RINGBUFFER_SKIP - advance read ptr by @num bytes + * + * @rbuf: pointer to struct dvb_ringbuffer + * @num: number of bytes to advance + */ +#define DVB_RINGBUFFER_SKIP(rbuf, num) {\ + (rbuf)->pread = ((rbuf)->pread + (num)) % (rbuf)->size;\ +} + +/** + * dvb_ringbuffer_read_user - Reads a buffer into a user pointer + * + * @rbuf: pointer to struct dvb_ringbuffer + * @buf: pointer to the buffer where the data will be stored + * @len: bytes from ring buffer into @buf + * + * This variant assumes that the buffer is a memory at the userspace. So, + * it will internally call copy_to_user(). + * + * Return: number of bytes transferred or -EFAULT + */ +extern ssize_t dvb_ringbuffer_read_user(struct dvb_ringbuffer *rbuf, + u8 __user *buf, size_t len); + +/** + * dvb_ringbuffer_read - Reads a buffer into a pointer + * + * @rbuf: pointer to struct dvb_ringbuffer + * @buf: pointer to the buffer where the data will be stored + * @len: bytes from ring buffer into @buf + * + * This variant assumes that the buffer is a memory at the Kernel space + * + * Return: number of bytes transferred or -EFAULT + */ +extern void dvb_ringbuffer_read(struct dvb_ringbuffer *rbuf, + u8 *buf, size_t len); + +/* + * write routines & macros + */ + +/** + * DVB_RINGBUFFER_WRITE_BYTE - write single byte to ring buffer + * + * @rbuf: pointer to struct dvb_ringbuffer + * @byte: byte to write + */ +#define DVB_RINGBUFFER_WRITE_BYTE(rbuf, byte) \ + { (rbuf)->data[(rbuf)->pwrite] = (byte); \ + (rbuf)->pwrite = ((rbuf)->pwrite + 1) % (rbuf)->size; } + +/** + * dvb_ringbuffer_write - Writes a buffer into the ringbuffer + * + * @rbuf: pointer to struct dvb_ringbuffer + * @buf: pointer to the buffer where the data will be read + * @len: bytes from ring buffer into @buf + * + * This variant assumes that the buffer is a memory at the Kernel space + * + * return: number of bytes transferred or -EFAULT + */ +extern ssize_t dvb_ringbuffer_write(struct dvb_ringbuffer *rbuf, const u8 *buf, + size_t len); + +/** + * dvb_ringbuffer_write_user - Writes a buffer received via a user pointer + * + * @rbuf: pointer to struct dvb_ringbuffer + * @buf: pointer to the buffer where the data will be read + * @len: bytes from ring buffer into @buf + * + * This variant assumes that the buffer is a memory at the userspace. So, + * it will internally call copy_from_user(). + * + * Return: number of bytes transferred or -EFAULT + */ +extern ssize_t dvb_ringbuffer_write_user(struct dvb_ringbuffer *rbuf, + const u8 __user *buf, size_t len); + +/** + * dvb_ringbuffer_pkt_write - Write a packet into the ringbuffer. + * + * @rbuf: Ringbuffer to write to. + * @buf: Buffer to write. + * @len: Length of buffer (currently limited to 65535 bytes max). + * + * Return: Number of bytes written, or -EFAULT, -ENOMEM, -EVINAL. + */ +extern ssize_t dvb_ringbuffer_pkt_write(struct dvb_ringbuffer *rbuf, u8 *buf, + size_t len); + +/** + * dvb_ringbuffer_pkt_read_user - Read from a packet in the ringbuffer. + * + * @rbuf: Ringbuffer concerned. + * @idx: Packet index as returned by dvb_ringbuffer_pkt_next(). + * @offset: Offset into packet to read from. + * @buf: Destination buffer for data. + * @len: Size of destination buffer. + * + * Return: Number of bytes read, or -EFAULT. + * + * .. note:: + * + * unlike dvb_ringbuffer_read(), this does **NOT** update the read pointer + * in the ringbuffer. You must use dvb_ringbuffer_pkt_dispose() to mark a + * packet as no longer required. + */ +extern ssize_t dvb_ringbuffer_pkt_read_user(struct dvb_ringbuffer *rbuf, + size_t idx, + int offset, u8 __user *buf, + size_t len); + +/** + * dvb_ringbuffer_pkt_read - Read from a packet in the ringbuffer. + * Note: unlike dvb_ringbuffer_read_user(), this DOES update the read pointer + * in the ringbuffer. + * + * @rbuf: Ringbuffer concerned. + * @idx: Packet index as returned by dvb_ringbuffer_pkt_next(). + * @offset: Offset into packet to read from. + * @buf: Destination buffer for data. + * @len: Size of destination buffer. + * + * Return: Number of bytes read, or -EFAULT. + */ +extern ssize_t dvb_ringbuffer_pkt_read(struct dvb_ringbuffer *rbuf, size_t idx, + int offset, u8 *buf, size_t len); + +/** + * dvb_ringbuffer_pkt_dispose - Dispose of a packet in the ring buffer. + * + * @rbuf: Ring buffer concerned. + * @idx: Packet index as returned by dvb_ringbuffer_pkt_next(). + */ +extern void dvb_ringbuffer_pkt_dispose(struct dvb_ringbuffer *rbuf, size_t idx); + +/** + * dvb_ringbuffer_pkt_next - Get the index of the next packet in a ringbuffer. + * + * @rbuf: Ringbuffer concerned. + * @idx: Previous packet index, or -1 to return the first packet index. + * @pktlen: On success, will be updated to contain the length of the packet + * in bytes. + * returns Packet index (if >=0), or -1 if no packets available. + */ +extern ssize_t dvb_ringbuffer_pkt_next(struct dvb_ringbuffer *rbuf, + size_t idx, size_t *pktlen); + +#endif /* _DVB_RINGBUFFER_H_ */ diff --git a/include/media/dvb_vb2.h b/include/media/dvb_vb2.h new file mode 100644 index 000000000..8cb88452c --- /dev/null +++ b/include/media/dvb_vb2.h @@ -0,0 +1,280 @@ +/* + * SPDX-License-Identifier: GPL-2.0 + * + * dvb-vb2.h - DVB driver helper framework for streaming I/O + * + * Copyright (C) 2015 Samsung Electronics + * + * Author: jh1009.sung@samsung.com + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation. + */ + +#ifndef _DVB_VB2_H +#define _DVB_VB2_H + +#include <linux/mutex.h> +#include <linux/poll.h> +#include <linux/dvb/dmx.h> +#include <media/videobuf2-core.h> +#include <media/videobuf2-dma-contig.h> +#include <media/videobuf2-vmalloc.h> + +/** + * enum dvb_buf_type - types of Digital TV memory-mapped buffers + * + * @DVB_BUF_TYPE_CAPTURE: buffer is filled by the Kernel, + * with a received Digital TV stream + */ +enum dvb_buf_type { + DVB_BUF_TYPE_CAPTURE = 1, +}; + +/** + * enum dvb_vb2_states - states to control VB2 state machine + * @DVB_VB2_STATE_NONE: + * VB2 engine not initialized yet, init failed or VB2 was released. + * @DVB_VB2_STATE_INIT: + * VB2 engine initialized. + * @DVB_VB2_STATE_REQBUFS: + * Buffers were requested + * @DVB_VB2_STATE_STREAMON: + * VB2 is streaming. Callers should not check it directly. Instead, + * they should use dvb_vb2_is_streaming(). + * + * Note: + * + * Callers should not touch at the state machine directly. This + * is handled inside dvb_vb2.c. + */ +enum dvb_vb2_states { + DVB_VB2_STATE_NONE = 0x0, + DVB_VB2_STATE_INIT = 0x1, + DVB_VB2_STATE_REQBUFS = 0x2, + DVB_VB2_STATE_STREAMON = 0x4, +}; + +#define DVB_VB2_NAME_MAX (20) + +/** + * struct dvb_buffer - video buffer information for v4l2. + * + * @vb: embedded struct &vb2_buffer. + * @list: list of &struct dvb_buffer. + */ +struct dvb_buffer { + struct vb2_buffer vb; + struct list_head list; +}; + +/** + * struct dvb_vb2_ctx - control struct for VB2 handler + * @vb_q: pointer to &struct vb2_queue with videobuf2 queue. + * @mutex: mutex to serialize vb2 operations. Used by + * vb2 core %wait_prepare and %wait_finish operations. + * @slock: spin lock used to protect buffer filling at dvb_vb2.c. + * @dvb_q: List of buffers that are not filled yet. + * @buf: Pointer to the buffer that are currently being filled. + * @offset: index to the next position at the @buf to be filled. + * @remain: How many bytes are left to be filled at @buf. + * @state: bitmask of buffer states as defined by &enum dvb_vb2_states. + * @buf_siz: size of each VB2 buffer. + * @buf_cnt: number of VB2 buffers. + * @nonblocking: + * If different than zero, device is operating on non-blocking + * mode. + * @flags: buffer flags as defined by &enum dmx_buffer_flags. + * Filled only at &DMX_DQBUF. &DMX_QBUF should zero this field. + * @count: monotonic counter for filled buffers. Helps to identify + * data stream loses. Filled only at &DMX_DQBUF. &DMX_QBUF should + * zero this field. + * + * @name: name of the device type. Currently, it can either be + * "dvr" or "demux_filter". + */ +struct dvb_vb2_ctx { + struct vb2_queue vb_q; + struct mutex mutex; + spinlock_t slock; + struct list_head dvb_q; + struct dvb_buffer *buf; + int offset; + int remain; + int state; + int buf_siz; + int buf_cnt; + int nonblocking; + + enum dmx_buffer_flags flags; + u32 count; + + char name[DVB_VB2_NAME_MAX + 1]; +}; + +#ifndef CONFIG_DVB_MMAP +static inline int dvb_vb2_init(struct dvb_vb2_ctx *ctx, + const char *name, int non_blocking) +{ + return 0; +}; +static inline int dvb_vb2_release(struct dvb_vb2_ctx *ctx) +{ + return 0; +}; +#define dvb_vb2_is_streaming(ctx) (0) +#define dvb_vb2_fill_buffer(ctx, file, wait, flags) (0) + +static inline __poll_t dvb_vb2_poll(struct dvb_vb2_ctx *ctx, + struct file *file, + poll_table *wait) +{ + return 0; +} +#else +/** + * dvb_vb2_init - initializes VB2 handler + * + * @ctx: control struct for VB2 handler + * @name: name for the VB2 handler + * @non_blocking: + * if not zero, it means that the device is at non-blocking mode + */ +int dvb_vb2_init(struct dvb_vb2_ctx *ctx, const char *name, int non_blocking); + +/** + * dvb_vb2_release - Releases the VB2 handler allocated resources and + * put @ctx at DVB_VB2_STATE_NONE state. + * @ctx: control struct for VB2 handler + */ +int dvb_vb2_release(struct dvb_vb2_ctx *ctx); + +/** + * dvb_vb2_is_streaming - checks if the VB2 handler is streaming + * @ctx: control struct for VB2 handler + * + * Return: 0 if not streaming, 1 otherwise. + */ +int dvb_vb2_is_streaming(struct dvb_vb2_ctx *ctx); + +/** + * dvb_vb2_fill_buffer - fills a VB2 buffer + * @ctx: control struct for VB2 handler + * @src: place where the data is stored + * @len: number of bytes to be copied from @src + * @buffer_flags: + * pointer to buffer flags as defined by &enum dmx_buffer_flags. + * can be NULL. + */ +int dvb_vb2_fill_buffer(struct dvb_vb2_ctx *ctx, + const unsigned char *src, int len, + enum dmx_buffer_flags *buffer_flags); + +/** + * dvb_vb2_poll - Wrapper to vb2_core_streamon() for Digital TV + * buffer handling. + * + * @ctx: control struct for VB2 handler + * @file: &struct file argument passed to the poll + * file operation handler. + * @wait: &poll_table wait argument passed to the poll + * file operation handler. + * + * Implements poll syscall() logic. + */ +__poll_t dvb_vb2_poll(struct dvb_vb2_ctx *ctx, struct file *file, + poll_table *wait); +#endif + +/** + * dvb_vb2_stream_on() - Wrapper to vb2_core_streamon() for Digital TV + * buffer handling. + * + * @ctx: control struct for VB2 handler + * + * Starts dvb streaming + */ +int dvb_vb2_stream_on(struct dvb_vb2_ctx *ctx); +/** + * dvb_vb2_stream_off() - Wrapper to vb2_core_streamoff() for Digital TV + * buffer handling. + * + * @ctx: control struct for VB2 handler + * + * Stops dvb streaming + */ +int dvb_vb2_stream_off(struct dvb_vb2_ctx *ctx); + +/** + * dvb_vb2_reqbufs() - Wrapper to vb2_core_reqbufs() for Digital TV + * buffer handling. + * + * @ctx: control struct for VB2 handler + * @req: &struct dmx_requestbuffers passed from userspace in + * order to handle &DMX_REQBUFS. + * + * Initiate streaming by requesting a number of buffers. Also used to + * free previously requested buffers, is ``req->count`` is zero. + */ +int dvb_vb2_reqbufs(struct dvb_vb2_ctx *ctx, struct dmx_requestbuffers *req); + +/** + * dvb_vb2_querybuf() - Wrapper to vb2_core_querybuf() for Digital TV + * buffer handling. + * + * @ctx: control struct for VB2 handler + * @b: &struct dmx_buffer passed from userspace in + * order to handle &DMX_QUERYBUF. + * + * + */ +int dvb_vb2_querybuf(struct dvb_vb2_ctx *ctx, struct dmx_buffer *b); + +/** + * dvb_vb2_expbuf() - Wrapper to vb2_core_expbuf() for Digital TV + * buffer handling. + * + * @ctx: control struct for VB2 handler + * @exp: &struct dmx_exportbuffer passed from userspace in + * order to handle &DMX_EXPBUF. + * + * Export a buffer as a file descriptor. + */ +int dvb_vb2_expbuf(struct dvb_vb2_ctx *ctx, struct dmx_exportbuffer *exp); + +/** + * dvb_vb2_qbuf() - Wrapper to vb2_core_qbuf() for Digital TV buffer handling. + * + * @ctx: control struct for VB2 handler + * @b: &struct dmx_buffer passed from userspace in + * order to handle &DMX_QBUF. + * + * Queue a Digital TV buffer as requested by userspace + */ +int dvb_vb2_qbuf(struct dvb_vb2_ctx *ctx, struct dmx_buffer *b); + +/** + * dvb_vb2_dqbuf() - Wrapper to vb2_core_dqbuf() for Digital TV + * buffer handling. + * + * @ctx: control struct for VB2 handler + * @b: &struct dmx_buffer passed from userspace in + * order to handle &DMX_DQBUF. + * + * Dequeue a Digital TV buffer to the userspace + */ +int dvb_vb2_dqbuf(struct dvb_vb2_ctx *ctx, struct dmx_buffer *b); + +/** + * dvb_vb2_mmap() - Wrapper to vb2_mmap() for Digital TV buffer handling. + * + * @ctx: control struct for VB2 handler + * @vma: pointer to &struct vm_area_struct with the vma passed + * to the mmap file operation handler in the driver. + * + * map Digital TV video buffers into application address space. + */ +int dvb_vb2_mmap(struct dvb_vb2_ctx *ctx, struct vm_area_struct *vma); + +#endif /* _DVB_VB2_H */ diff --git a/include/media/dvbdev.h b/include/media/dvbdev.h new file mode 100644 index 000000000..91ff2d5fc --- /dev/null +++ b/include/media/dvbdev.h @@ -0,0 +1,489 @@ +/* + * dvbdev.h + * + * Copyright (C) 2000 Ralph Metzler & Marcus Metzler + * for convergence integrated media GmbH + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Lesser Public License + * as published by the Free Software Foundation; either version 2.1 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#ifndef _DVBDEV_H_ +#define _DVBDEV_H_ + +#include <linux/types.h> +#include <linux/poll.h> +#include <linux/fs.h> +#include <linux/list.h> +#include <media/media-device.h> + +#define DVB_MAJOR 212 + +#if defined(CONFIG_DVB_MAX_ADAPTERS) && CONFIG_DVB_MAX_ADAPTERS > 0 + #define DVB_MAX_ADAPTERS CONFIG_DVB_MAX_ADAPTERS +#else + #define DVB_MAX_ADAPTERS 16 +#endif + +#define DVB_UNSET (-1) + +/* List of DVB device types */ + +/** + * enum dvb_device_type - type of the Digital TV device + * + * @DVB_DEVICE_SEC: Digital TV standalone Common Interface (CI) + * @DVB_DEVICE_FRONTEND: Digital TV frontend. + * @DVB_DEVICE_DEMUX: Digital TV demux. + * @DVB_DEVICE_DVR: Digital TV digital video record (DVR). + * @DVB_DEVICE_CA: Digital TV Conditional Access (CA). + * @DVB_DEVICE_NET: Digital TV network. + * + * @DVB_DEVICE_VIDEO: Digital TV video decoder. + * Deprecated. Used only on av7110-av. + * @DVB_DEVICE_AUDIO: Digital TV audio decoder. + * Deprecated. Used only on av7110-av. + * @DVB_DEVICE_OSD: Digital TV On Screen Display (OSD). + * Deprecated. Used only on av7110. + */ +enum dvb_device_type { + DVB_DEVICE_SEC, + DVB_DEVICE_FRONTEND, + DVB_DEVICE_DEMUX, + DVB_DEVICE_DVR, + DVB_DEVICE_CA, + DVB_DEVICE_NET, + + DVB_DEVICE_VIDEO, + DVB_DEVICE_AUDIO, + DVB_DEVICE_OSD, +}; + +#define DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr) \ + static short adapter_nr[] = \ + {[0 ... (DVB_MAX_ADAPTERS - 1)] = DVB_UNSET }; \ + module_param_array(adapter_nr, short, NULL, 0444); \ + MODULE_PARM_DESC(adapter_nr, "DVB adapter numbers") + +struct dvb_frontend; + +/** + * struct dvb_adapter - represents a Digital TV adapter using Linux DVB API + * + * @num: Number of the adapter + * @list_head: List with the DVB adapters + * @device_list: List with the DVB devices + * @name: Name of the adapter + * @proposed_mac: proposed MAC address for the adapter + * @priv: private data + * @device: pointer to struct device + * @module: pointer to struct module + * @mfe_shared: indicates mutually exclusive frontends. + * Use of this flag is currently deprecated. + * @mfe_dvbdev: Frontend device in use, in the case of MFE + * @mfe_lock: Lock to prevent using the other frontends when MFE is + * used. + * @mdev_lock: Protect access to the mdev pointer. + * @mdev: pointer to struct media_device, used when the media + * controller is used. + * @conn: RF connector. Used only if the device has no separate + * tuner. + * @conn_pads: pointer to struct media_pad associated with @conn; + */ +struct dvb_adapter { + int num; + struct list_head list_head; + struct list_head device_list; + const char *name; + u8 proposed_mac [6]; + void* priv; + + struct device *device; + + struct module *module; + + int mfe_shared; /* indicates mutually exclusive frontends */ + struct dvb_device *mfe_dvbdev; /* frontend device in use */ + struct mutex mfe_lock; /* access lock for thread creation */ + +#if defined(CONFIG_MEDIA_CONTROLLER_DVB) + struct mutex mdev_lock; + struct media_device *mdev; + struct media_entity *conn; + struct media_pad *conn_pads; +#endif +}; + +/** + * struct dvb_device - represents a DVB device node + * + * @list_head: List head with all DVB devices + * @ref: reference counter + * @fops: pointer to struct file_operations + * @adapter: pointer to the adapter that holds this device node + * @type: type of the device, as defined by &enum dvb_device_type. + * @minor: devnode minor number. Major number is always DVB_MAJOR. + * @id: device ID number, inside the adapter + * @readers: Initialized by the caller. Each call to open() in Read Only mode + * decreases this counter by one. + * @writers: Initialized by the caller. Each call to open() in Read/Write + * mode decreases this counter by one. + * @users: Initialized by the caller. Each call to open() in any mode + * decreases this counter by one. + * @wait_queue: wait queue, used to wait for certain events inside one of + * the DVB API callers + * @kernel_ioctl: callback function used to handle ioctl calls from userspace. + * @name: Name to be used for the device at the Media Controller + * @entity: pointer to struct media_entity associated with the device node + * @pads: pointer to struct media_pad associated with @entity; + * @priv: private data + * @intf_devnode: Pointer to media_intf_devnode. Used by the dvbdev core to + * store the MC device node interface + * @tsout_num_entities: Number of Transport Stream output entities + * @tsout_entity: array with MC entities associated to each TS output node + * @tsout_pads: array with the source pads for each @tsout_entity + * + * This structure is used by the DVB core (frontend, CA, net, demux) in + * order to create the device nodes. Usually, driver should not initialize + * this struct diretly. + */ +struct dvb_device { + struct list_head list_head; + struct kref ref; + const struct file_operations *fops; + struct dvb_adapter *adapter; + enum dvb_device_type type; + int minor; + u32 id; + + /* in theory, 'users' can vanish now, + but I don't want to change too much now... */ + int readers; + int writers; + int users; + + wait_queue_head_t wait_queue; + /* don't really need those !? -- FIXME: use video_usercopy */ + int (*kernel_ioctl)(struct file *file, unsigned int cmd, void *arg); + + /* Needed for media controller register/unregister */ +#if defined(CONFIG_MEDIA_CONTROLLER_DVB) + const char *name; + + /* Allocated and filled inside dvbdev.c */ + struct media_intf_devnode *intf_devnode; + + unsigned tsout_num_entities; + struct media_entity *entity, *tsout_entity; + struct media_pad *pads, *tsout_pads; +#endif + + void *priv; +}; + +/** + * struct dvbdevfops_node - fops nodes registered in dvbdevfops_list + * + * @fops: Dynamically allocated fops for ->owner registration + * @type: type of dvb_device + * @template: dvb_device used for registration + * @list_head: list_head for dvbdevfops_list + */ +struct dvbdevfops_node { + struct file_operations *fops; + enum dvb_device_type type; + const struct dvb_device *template; + struct list_head list_head; +}; + +/** + * dvb_device_get - Increase dvb_device reference + * + * @dvbdev: pointer to struct dvb_device + */ +struct dvb_device *dvb_device_get(struct dvb_device *dvbdev); + +/** + * dvb_device_put - Decrease dvb_device reference + * + * @dvbdev: pointer to struct dvb_device + */ +void dvb_device_put(struct dvb_device *dvbdev); + +/** + * dvb_register_adapter - Registers a new DVB adapter + * + * @adap: pointer to struct dvb_adapter + * @name: Adapter's name + * @module: initialized with THIS_MODULE at the caller + * @device: pointer to struct device that corresponds to the device driver + * @adapter_nums: Array with a list of the numbers for @dvb_register_adapter; + * to select among them. Typically, initialized with: + * DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nums) + */ +int dvb_register_adapter(struct dvb_adapter *adap, const char *name, + struct module *module, struct device *device, + short *adapter_nums); + +/** + * dvb_unregister_adapter - Unregisters a DVB adapter + * + * @adap: pointer to struct dvb_adapter + */ +int dvb_unregister_adapter(struct dvb_adapter *adap); + +/** + * dvb_register_device - Registers a new DVB device + * + * @adap: pointer to struct dvb_adapter + * @pdvbdev: pointer to the place where the new struct dvb_device will be + * stored + * @template: Template used to create &pdvbdev; + * @priv: private data + * @type: type of the device, as defined by &enum dvb_device_type. + * @demux_sink_pads: Number of demux outputs, to be used to create the TS + * outputs via the Media Controller. + */ +int dvb_register_device(struct dvb_adapter *adap, + struct dvb_device **pdvbdev, + const struct dvb_device *template, + void *priv, + enum dvb_device_type type, + int demux_sink_pads); + +/** + * dvb_remove_device - Remove a registered DVB device + * + * This does not free memory. dvb_free_device() will do that when + * reference counter is empty + * + * @dvbdev: pointer to struct dvb_device + */ +void dvb_remove_device(struct dvb_device *dvbdev); + + +/** + * dvb_unregister_device - Unregisters a DVB device + * + * @dvbdev: pointer to struct dvb_device + */ +void dvb_unregister_device(struct dvb_device *dvbdev); + +#ifdef CONFIG_MEDIA_CONTROLLER_DVB +/** + * dvb_create_media_graph - Creates media graph for the Digital TV part of the + * device. + * + * @adap: pointer to &struct dvb_adapter + * @create_rf_connector: if true, it creates the RF connector too + * + * This function checks all DVB-related functions at the media controller + * entities and creates the needed links for the media graph. It is + * capable of working with multiple tuners or multiple frontends, but it + * won't create links if the device has multiple tuners and multiple frontends + * or if the device has multiple muxes. In such case, the caller driver should + * manually create the remaining links. + */ +__must_check int dvb_create_media_graph(struct dvb_adapter *adap, + bool create_rf_connector); + +/** + * dvb_register_media_controller - registers a media controller at DVB adapter + * + * @adap: pointer to &struct dvb_adapter + * @mdev: pointer to &struct media_device + */ +static inline void dvb_register_media_controller(struct dvb_adapter *adap, + struct media_device *mdev) +{ + adap->mdev = mdev; +} + +/** + * dvb_get_media_controller - gets the associated media controller + * + * @adap: pointer to &struct dvb_adapter + */ +static inline struct media_device * +dvb_get_media_controller(struct dvb_adapter *adap) +{ + return adap->mdev; +} +#else +static inline +int dvb_create_media_graph(struct dvb_adapter *adap, + bool create_rf_connector) +{ + return 0; +}; +#define dvb_register_media_controller(a, b) {} +#define dvb_get_media_controller(a) NULL +#endif + +/** + * dvb_generic_open - Digital TV open function, used by DVB devices + * + * @inode: pointer to &struct inode. + * @file: pointer to &struct file. + * + * Checks if a DVB devnode is still valid, and if the permissions are + * OK and increment negative use count. + */ +int dvb_generic_open(struct inode *inode, struct file *file); + +/** + * dvb_generic_close - Digital TV close function, used by DVB devices + * + * @inode: pointer to &struct inode. + * @file: pointer to &struct file. + * + * Checks if a DVB devnode is still valid, and if the permissions are + * OK and decrement negative use count. + */ +int dvb_generic_release(struct inode *inode, struct file *file); + +/** + * dvb_generic_ioctl - Digital TV close function, used by DVB devices + * + * @file: pointer to &struct file. + * @cmd: Ioctl name. + * @arg: Ioctl argument. + * + * Checks if a DVB devnode and struct dvbdev.kernel_ioctl is still valid. + * If so, calls dvb_usercopy(). + */ +long dvb_generic_ioctl(struct file *file, + unsigned int cmd, unsigned long arg); + +/** + * dvb_usercopy - copies data from/to userspace memory when an ioctl is + * issued. + * + * @file: Pointer to struct &file. + * @cmd: Ioctl name. + * @arg: Ioctl argument. + * @func: function that will actually handle the ioctl + * + * Ancillary function that uses ioctl direction and size to copy from + * userspace. Then, it calls @func, and, if needed, data is copied back + * to userspace. + */ +int dvb_usercopy(struct file *file, unsigned int cmd, unsigned long arg, + int (*func)(struct file *file, unsigned int cmd, void *arg)); + +#if IS_ENABLED(CONFIG_I2C) + +struct i2c_adapter; +struct i2c_client; +/** + * dvb_module_probe - helper routine to probe an I2C module + * + * @module_name: + * Name of the I2C module to be probed + * @name: + * Optional name for the I2C module. Used for debug purposes. + * If %NULL, defaults to @module_name. + * @adap: + * pointer to &struct i2c_adapter that describes the I2C adapter where + * the module will be bound. + * @addr: + * I2C address of the adapter, in 7-bit notation. + * @platform_data: + * Platform data to be passed to the I2C module probed. + * + * This function binds an I2C device into the DVB core. Should be used by + * all drivers that use I2C bus to control the hardware. A module bound + * with dvb_module_probe() should use dvb_module_release() to unbind. + * + * Return: + * On success, return an &struct i2c_client, pointing to the bound + * I2C device. %NULL otherwise. + * + * .. note:: + * + * In the past, DVB modules (mainly, frontends) were bound via dvb_attach() + * macro, with does an ugly hack, using I2C low level functions. Such + * usage is deprecated and will be removed soon. Instead, use this routine. + */ +struct i2c_client *dvb_module_probe(const char *module_name, + const char *name, + struct i2c_adapter *adap, + unsigned char addr, + void *platform_data); + +/** + * dvb_module_release - releases an I2C device allocated with + * dvb_module_probe(). + * + * @client: pointer to &struct i2c_client with the I2C client to be released. + * can be %NULL. + * + * This function should be used to free all resources reserved by + * dvb_module_probe() and unbinding the I2C hardware. + */ +void dvb_module_release(struct i2c_client *client); + +#endif /* CONFIG_I2C */ + +/* Legacy generic DVB attach function. */ +#ifdef CONFIG_MEDIA_ATTACH + +/** + * dvb_attach - attaches a DVB frontend into the DVB core. + * + * @FUNCTION: function on a frontend module to be called. + * @ARGS...: @FUNCTION arguments. + * + * This ancillary function loads a frontend module in runtime and runs + * the @FUNCTION function there, with @ARGS. + * As it increments symbol usage cont, at unregister, dvb_detach() + * should be called. + * + * .. note:: + * + * In the past, DVB modules (mainly, frontends) were bound via dvb_attach() + * macro, with does an ugly hack, using I2C low level functions. Such + * usage is deprecated and will be removed soon. Instead, you should use + * dvb_module_probe(). + */ +#define dvb_attach(FUNCTION, ARGS...) ({ \ + void *__r = NULL; \ + typeof(&FUNCTION) __a = symbol_request(FUNCTION); \ + if (__a) { \ + __r = (void *) __a(ARGS); \ + if (__r == NULL) \ + symbol_put(FUNCTION); \ + } else { \ + printk(KERN_ERR "DVB: Unable to find symbol "#FUNCTION"()\n"); \ + } \ + __r; \ +}) + +/** + * dvb_detach - detaches a DVB frontend loaded via dvb_attach() + * + * @FUNC: attach function + * + * Decrements usage count for a function previously called via dvb_attach(). + */ + +#define dvb_detach(FUNC) symbol_put_addr(FUNC) + +#else +#define dvb_attach(FUNCTION, ARGS...) ({ \ + FUNCTION(ARGS); \ +}) + +#define dvb_detach(FUNC) {} + +#endif /* CONFIG_MEDIA_ATTACH */ + +#endif /* #ifndef _DVBDEV_H_ */ diff --git a/include/media/fwht-ctrls.h b/include/media/fwht-ctrls.h new file mode 100644 index 000000000..615027410 --- /dev/null +++ b/include/media/fwht-ctrls.h @@ -0,0 +1,31 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * These are the FWHT state controls for use with stateless FWHT + * codec drivers. + * + * It turns out that these structs are not stable yet and will undergo + * more changes. So keep them private until they are stable and ready to + * become part of the official public API. + */ + +#ifndef _FWHT_CTRLS_H_ +#define _FWHT_CTRLS_H_ + +#define V4L2_CTRL_TYPE_FWHT_PARAMS 0x0105 + +#define V4L2_CID_MPEG_VIDEO_FWHT_PARAMS (V4L2_CID_MPEG_BASE + 292) + +struct v4l2_ctrl_fwht_params { + __u64 backward_ref_ts; + __u32 version; + __u32 width; + __u32 height; + __u32 flags; + __u32 colorspace; + __u32 xfer_func; + __u32 ycbcr_enc; + __u32 quantization; +}; + + +#endif diff --git a/include/media/h264-ctrls.h b/include/media/h264-ctrls.h new file mode 100644 index 000000000..ec4799154 --- /dev/null +++ b/include/media/h264-ctrls.h @@ -0,0 +1,231 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * These are the H.264 state controls for use with stateless H.264 + * codec drivers. + * + * It turns out that these structs are not stable yet and will undergo + * more changes. So keep them private until they are stable and ready to + * become part of the official public API. + */ + +#ifndef _H264_CTRLS_H_ +#define _H264_CTRLS_H_ + +#include <linux/videodev2.h> + +/* + * Maximum DPB size, as specified by section 'A.3.1 Level limits + * common to the Baseline, Main, and Extended profiles'. + */ +#define V4L2_H264_NUM_DPB_ENTRIES 16 + +#define V4L2_H264_REF_LIST_LEN (2 * V4L2_H264_NUM_DPB_ENTRIES) + +/* Our pixel format isn't stable at the moment */ +#define V4L2_PIX_FMT_H264_SLICE v4l2_fourcc('S', '2', '6', '4') /* H264 parsed slices */ + +/* + * This is put insanely high to avoid conflicting with controls that + * would be added during the phase where those controls are not + * stable. It should be fixed eventually. + */ +#define V4L2_CID_MPEG_VIDEO_H264_SPS (V4L2_CID_MPEG_BASE+1000) +#define V4L2_CID_MPEG_VIDEO_H264_PPS (V4L2_CID_MPEG_BASE+1001) +#define V4L2_CID_MPEG_VIDEO_H264_SCALING_MATRIX (V4L2_CID_MPEG_BASE+1002) +#define V4L2_CID_MPEG_VIDEO_H264_SLICE_PARAMS (V4L2_CID_MPEG_BASE+1003) +#define V4L2_CID_MPEG_VIDEO_H264_DECODE_PARAMS (V4L2_CID_MPEG_BASE+1004) +#define V4L2_CID_MPEG_VIDEO_H264_DECODE_MODE (V4L2_CID_MPEG_BASE+1005) +#define V4L2_CID_MPEG_VIDEO_H264_START_CODE (V4L2_CID_MPEG_BASE+1006) +#define V4L2_CID_MPEG_VIDEO_H264_PRED_WEIGHTS (V4L2_CID_MPEG_BASE+1007) + +/* enum v4l2_ctrl_type type values */ +#define V4L2_CTRL_TYPE_H264_SPS 0x0110 +#define V4L2_CTRL_TYPE_H264_PPS 0x0111 +#define V4L2_CTRL_TYPE_H264_SCALING_MATRIX 0x0112 +#define V4L2_CTRL_TYPE_H264_SLICE_PARAMS 0x0113 +#define V4L2_CTRL_TYPE_H264_DECODE_PARAMS 0x0114 +#define V4L2_CTRL_TYPE_H264_PRED_WEIGHTS 0x0115 + +enum v4l2_mpeg_video_h264_decode_mode { + V4L2_MPEG_VIDEO_H264_DECODE_MODE_SLICE_BASED, + V4L2_MPEG_VIDEO_H264_DECODE_MODE_FRAME_BASED, +}; + +enum v4l2_mpeg_video_h264_start_code { + V4L2_MPEG_VIDEO_H264_START_CODE_NONE, + V4L2_MPEG_VIDEO_H264_START_CODE_ANNEX_B, +}; + +#define V4L2_H264_SPS_CONSTRAINT_SET0_FLAG 0x01 +#define V4L2_H264_SPS_CONSTRAINT_SET1_FLAG 0x02 +#define V4L2_H264_SPS_CONSTRAINT_SET2_FLAG 0x04 +#define V4L2_H264_SPS_CONSTRAINT_SET3_FLAG 0x08 +#define V4L2_H264_SPS_CONSTRAINT_SET4_FLAG 0x10 +#define V4L2_H264_SPS_CONSTRAINT_SET5_FLAG 0x20 + +#define V4L2_H264_SPS_FLAG_SEPARATE_COLOUR_PLANE 0x01 +#define V4L2_H264_SPS_FLAG_QPPRIME_Y_ZERO_TRANSFORM_BYPASS 0x02 +#define V4L2_H264_SPS_FLAG_DELTA_PIC_ORDER_ALWAYS_ZERO 0x04 +#define V4L2_H264_SPS_FLAG_GAPS_IN_FRAME_NUM_VALUE_ALLOWED 0x08 +#define V4L2_H264_SPS_FLAG_FRAME_MBS_ONLY 0x10 +#define V4L2_H264_SPS_FLAG_MB_ADAPTIVE_FRAME_FIELD 0x20 +#define V4L2_H264_SPS_FLAG_DIRECT_8X8_INFERENCE 0x40 + +struct v4l2_ctrl_h264_sps { + __u8 profile_idc; + __u8 constraint_set_flags; + __u8 level_idc; + __u8 seq_parameter_set_id; + __u8 chroma_format_idc; + __u8 bit_depth_luma_minus8; + __u8 bit_depth_chroma_minus8; + __u8 log2_max_frame_num_minus4; + __u8 pic_order_cnt_type; + __u8 log2_max_pic_order_cnt_lsb_minus4; + __u8 max_num_ref_frames; + __u8 num_ref_frames_in_pic_order_cnt_cycle; + __s32 offset_for_ref_frame[255]; + __s32 offset_for_non_ref_pic; + __s32 offset_for_top_to_bottom_field; + __u16 pic_width_in_mbs_minus1; + __u16 pic_height_in_map_units_minus1; + __u32 flags; +}; + +#define V4L2_H264_PPS_FLAG_ENTROPY_CODING_MODE 0x0001 +#define V4L2_H264_PPS_FLAG_BOTTOM_FIELD_PIC_ORDER_IN_FRAME_PRESENT 0x0002 +#define V4L2_H264_PPS_FLAG_WEIGHTED_PRED 0x0004 +#define V4L2_H264_PPS_FLAG_DEBLOCKING_FILTER_CONTROL_PRESENT 0x0008 +#define V4L2_H264_PPS_FLAG_CONSTRAINED_INTRA_PRED 0x0010 +#define V4L2_H264_PPS_FLAG_REDUNDANT_PIC_CNT_PRESENT 0x0020 +#define V4L2_H264_PPS_FLAG_TRANSFORM_8X8_MODE 0x0040 +#define V4L2_H264_PPS_FLAG_SCALING_MATRIX_PRESENT 0x0080 + +struct v4l2_ctrl_h264_pps { + __u8 pic_parameter_set_id; + __u8 seq_parameter_set_id; + __u8 num_slice_groups_minus1; + __u8 num_ref_idx_l0_default_active_minus1; + __u8 num_ref_idx_l1_default_active_minus1; + __u8 weighted_bipred_idc; + __s8 pic_init_qp_minus26; + __s8 pic_init_qs_minus26; + __s8 chroma_qp_index_offset; + __s8 second_chroma_qp_index_offset; + __u16 flags; +}; + +struct v4l2_ctrl_h264_scaling_matrix { + __u8 scaling_list_4x4[6][16]; + __u8 scaling_list_8x8[6][64]; +}; + +struct v4l2_h264_weight_factors { + __s16 luma_weight[32]; + __s16 luma_offset[32]; + __s16 chroma_weight[32][2]; + __s16 chroma_offset[32][2]; +}; + +#define V4L2_H264_CTRL_PRED_WEIGHTS_REQUIRED(pps, slice) \ + ((((pps)->flags & V4L2_H264_PPS_FLAG_WEIGHTED_PRED) && \ + ((slice)->slice_type == V4L2_H264_SLICE_TYPE_P || \ + (slice)->slice_type == V4L2_H264_SLICE_TYPE_SP)) || \ + ((pps)->weighted_bipred_idc == 1 && \ + (slice)->slice_type == V4L2_H264_SLICE_TYPE_B)) + +struct v4l2_ctrl_h264_pred_weights { + __u16 luma_log2_weight_denom; + __u16 chroma_log2_weight_denom; + struct v4l2_h264_weight_factors weight_factors[2]; +}; + +#define V4L2_H264_SLICE_TYPE_P 0 +#define V4L2_H264_SLICE_TYPE_B 1 +#define V4L2_H264_SLICE_TYPE_I 2 +#define V4L2_H264_SLICE_TYPE_SP 3 +#define V4L2_H264_SLICE_TYPE_SI 4 + +#define V4L2_H264_SLICE_FLAG_DIRECT_SPATIAL_MV_PRED 0x01 +#define V4L2_H264_SLICE_FLAG_SP_FOR_SWITCH 0x02 + +#define V4L2_H264_TOP_FIELD_REF 0x1 +#define V4L2_H264_BOTTOM_FIELD_REF 0x2 +#define V4L2_H264_FRAME_REF 0x3 + +struct v4l2_h264_reference { + __u8 fields; + + /* Index into v4l2_ctrl_h264_decode_params.dpb[] */ + __u8 index; +}; + +struct v4l2_ctrl_h264_slice_params { + /* Offset in bits to slice_data() from the beginning of this slice. */ + __u32 header_bit_size; + + __u32 first_mb_in_slice; + + __u8 slice_type; + __u8 colour_plane_id; + __u8 redundant_pic_cnt; + __u8 cabac_init_idc; + __s8 slice_qp_delta; + __s8 slice_qs_delta; + __u8 disable_deblocking_filter_idc; + __s8 slice_alpha_c0_offset_div2; + __s8 slice_beta_offset_div2; + __u8 num_ref_idx_l0_active_minus1; + __u8 num_ref_idx_l1_active_minus1; + + __u8 reserved; + + struct v4l2_h264_reference ref_pic_list0[V4L2_H264_REF_LIST_LEN]; + struct v4l2_h264_reference ref_pic_list1[V4L2_H264_REF_LIST_LEN]; + + __u32 flags; +}; + +#define V4L2_H264_DPB_ENTRY_FLAG_VALID 0x01 +#define V4L2_H264_DPB_ENTRY_FLAG_ACTIVE 0x02 +#define V4L2_H264_DPB_ENTRY_FLAG_LONG_TERM 0x04 +#define V4L2_H264_DPB_ENTRY_FLAG_FIELD 0x08 + +struct v4l2_h264_dpb_entry { + __u64 reference_ts; + __u32 pic_num; + __u16 frame_num; + __u8 fields; + __u8 reserved[5]; + /* Note that field is indicated by v4l2_buffer.field */ + __s32 top_field_order_cnt; + __s32 bottom_field_order_cnt; + __u32 flags; /* V4L2_H264_DPB_ENTRY_FLAG_* */ +}; + +#define V4L2_H264_DECODE_PARAM_FLAG_IDR_PIC 0x01 +#define V4L2_H264_DECODE_PARAM_FLAG_FIELD_PIC 0x02 +#define V4L2_H264_DECODE_PARAM_FLAG_BOTTOM_FIELD 0x04 + +struct v4l2_ctrl_h264_decode_params { + struct v4l2_h264_dpb_entry dpb[V4L2_H264_NUM_DPB_ENTRIES]; + __u16 nal_ref_idc; + __u16 frame_num; + __s32 top_field_order_cnt; + __s32 bottom_field_order_cnt; + __u16 idr_pic_id; + __u16 pic_order_cnt_lsb; + __s32 delta_pic_order_cnt_bottom; + __s32 delta_pic_order_cnt0; + __s32 delta_pic_order_cnt1; + /* Size in bits of dec_ref_pic_marking() syntax element. */ + __u32 dec_ref_pic_marking_bit_size; + /* Size in bits of pic order count syntax. */ + __u32 pic_order_cnt_bit_size; + __u32 slice_group_change_cycle; + + __u32 reserved; + __u32 flags; /* V4L2_H264_DECODE_PARAM_FLAG_* */ +}; + +#endif diff --git a/include/media/hevc-ctrls.h b/include/media/hevc-ctrls.h new file mode 100644 index 000000000..a3b650ab0 --- /dev/null +++ b/include/media/hevc-ctrls.h @@ -0,0 +1,213 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * These are the HEVC state controls for use with stateless HEVC + * codec drivers. + * + * It turns out that these structs are not stable yet and will undergo + * more changes. So keep them private until they are stable and ready to + * become part of the official public API. + */ + +#ifndef _HEVC_CTRLS_H_ +#define _HEVC_CTRLS_H_ + +#include <linux/videodev2.h> + +/* The pixel format isn't stable at the moment and will likely be renamed. */ +#define V4L2_PIX_FMT_HEVC_SLICE v4l2_fourcc('S', '2', '6', '5') /* HEVC parsed slices */ + +#define V4L2_CID_MPEG_VIDEO_HEVC_SPS (V4L2_CID_MPEG_BASE + 1008) +#define V4L2_CID_MPEG_VIDEO_HEVC_PPS (V4L2_CID_MPEG_BASE + 1009) +#define V4L2_CID_MPEG_VIDEO_HEVC_SLICE_PARAMS (V4L2_CID_MPEG_BASE + 1010) +#define V4L2_CID_MPEG_VIDEO_HEVC_DECODE_MODE (V4L2_CID_MPEG_BASE + 1015) +#define V4L2_CID_MPEG_VIDEO_HEVC_START_CODE (V4L2_CID_MPEG_BASE + 1016) + +/* enum v4l2_ctrl_type type values */ +#define V4L2_CTRL_TYPE_HEVC_SPS 0x0120 +#define V4L2_CTRL_TYPE_HEVC_PPS 0x0121 +#define V4L2_CTRL_TYPE_HEVC_SLICE_PARAMS 0x0122 + +enum v4l2_mpeg_video_hevc_decode_mode { + V4L2_MPEG_VIDEO_HEVC_DECODE_MODE_SLICE_BASED, + V4L2_MPEG_VIDEO_HEVC_DECODE_MODE_FRAME_BASED, +}; + +enum v4l2_mpeg_video_hevc_start_code { + V4L2_MPEG_VIDEO_HEVC_START_CODE_NONE, + V4L2_MPEG_VIDEO_HEVC_START_CODE_ANNEX_B, +}; + +#define V4L2_HEVC_SLICE_TYPE_B 0 +#define V4L2_HEVC_SLICE_TYPE_P 1 +#define V4L2_HEVC_SLICE_TYPE_I 2 + +#define V4L2_HEVC_SPS_FLAG_SEPARATE_COLOUR_PLANE (1ULL << 0) +#define V4L2_HEVC_SPS_FLAG_SCALING_LIST_ENABLED (1ULL << 1) +#define V4L2_HEVC_SPS_FLAG_AMP_ENABLED (1ULL << 2) +#define V4L2_HEVC_SPS_FLAG_SAMPLE_ADAPTIVE_OFFSET (1ULL << 3) +#define V4L2_HEVC_SPS_FLAG_PCM_ENABLED (1ULL << 4) +#define V4L2_HEVC_SPS_FLAG_PCM_LOOP_FILTER_DISABLED (1ULL << 5) +#define V4L2_HEVC_SPS_FLAG_LONG_TERM_REF_PICS_PRESENT (1ULL << 6) +#define V4L2_HEVC_SPS_FLAG_SPS_TEMPORAL_MVP_ENABLED (1ULL << 7) +#define V4L2_HEVC_SPS_FLAG_STRONG_INTRA_SMOOTHING_ENABLED (1ULL << 8) + +/* The controls are not stable at the moment and will likely be reworked. */ +struct v4l2_ctrl_hevc_sps { + /* ISO/IEC 23008-2, ITU-T Rec. H.265: Sequence parameter set */ + __u16 pic_width_in_luma_samples; + __u16 pic_height_in_luma_samples; + __u8 bit_depth_luma_minus8; + __u8 bit_depth_chroma_minus8; + __u8 log2_max_pic_order_cnt_lsb_minus4; + __u8 sps_max_dec_pic_buffering_minus1; + __u8 sps_max_num_reorder_pics; + __u8 sps_max_latency_increase_plus1; + __u8 log2_min_luma_coding_block_size_minus3; + __u8 log2_diff_max_min_luma_coding_block_size; + __u8 log2_min_luma_transform_block_size_minus2; + __u8 log2_diff_max_min_luma_transform_block_size; + __u8 max_transform_hierarchy_depth_inter; + __u8 max_transform_hierarchy_depth_intra; + __u8 pcm_sample_bit_depth_luma_minus1; + __u8 pcm_sample_bit_depth_chroma_minus1; + __u8 log2_min_pcm_luma_coding_block_size_minus3; + __u8 log2_diff_max_min_pcm_luma_coding_block_size; + __u8 num_short_term_ref_pic_sets; + __u8 num_long_term_ref_pics_sps; + __u8 chroma_format_idc; + + __u8 padding; + + __u64 flags; +}; + +#define V4L2_HEVC_PPS_FLAG_DEPENDENT_SLICE_SEGMENT_ENABLED (1ULL << 0) +#define V4L2_HEVC_PPS_FLAG_OUTPUT_FLAG_PRESENT (1ULL << 1) +#define V4L2_HEVC_PPS_FLAG_SIGN_DATA_HIDING_ENABLED (1ULL << 2) +#define V4L2_HEVC_PPS_FLAG_CABAC_INIT_PRESENT (1ULL << 3) +#define V4L2_HEVC_PPS_FLAG_CONSTRAINED_INTRA_PRED (1ULL << 4) +#define V4L2_HEVC_PPS_FLAG_TRANSFORM_SKIP_ENABLED (1ULL << 5) +#define V4L2_HEVC_PPS_FLAG_CU_QP_DELTA_ENABLED (1ULL << 6) +#define V4L2_HEVC_PPS_FLAG_PPS_SLICE_CHROMA_QP_OFFSETS_PRESENT (1ULL << 7) +#define V4L2_HEVC_PPS_FLAG_WEIGHTED_PRED (1ULL << 8) +#define V4L2_HEVC_PPS_FLAG_WEIGHTED_BIPRED (1ULL << 9) +#define V4L2_HEVC_PPS_FLAG_TRANSQUANT_BYPASS_ENABLED (1ULL << 10) +#define V4L2_HEVC_PPS_FLAG_TILES_ENABLED (1ULL << 11) +#define V4L2_HEVC_PPS_FLAG_ENTROPY_CODING_SYNC_ENABLED (1ULL << 12) +#define V4L2_HEVC_PPS_FLAG_LOOP_FILTER_ACROSS_TILES_ENABLED (1ULL << 13) +#define V4L2_HEVC_PPS_FLAG_PPS_LOOP_FILTER_ACROSS_SLICES_ENABLED (1ULL << 14) +#define V4L2_HEVC_PPS_FLAG_DEBLOCKING_FILTER_OVERRIDE_ENABLED (1ULL << 15) +#define V4L2_HEVC_PPS_FLAG_PPS_DISABLE_DEBLOCKING_FILTER (1ULL << 16) +#define V4L2_HEVC_PPS_FLAG_LISTS_MODIFICATION_PRESENT (1ULL << 17) +#define V4L2_HEVC_PPS_FLAG_SLICE_SEGMENT_HEADER_EXTENSION_PRESENT (1ULL << 18) + +struct v4l2_ctrl_hevc_pps { + /* ISO/IEC 23008-2, ITU-T Rec. H.265: Picture parameter set */ + __u8 num_extra_slice_header_bits; + __s8 init_qp_minus26; + __u8 diff_cu_qp_delta_depth; + __s8 pps_cb_qp_offset; + __s8 pps_cr_qp_offset; + __u8 num_tile_columns_minus1; + __u8 num_tile_rows_minus1; + __u8 column_width_minus1[20]; + __u8 row_height_minus1[22]; + __s8 pps_beta_offset_div2; + __s8 pps_tc_offset_div2; + __u8 log2_parallel_merge_level_minus2; + + __u8 padding[4]; + __u64 flags; +}; + +#define V4L2_HEVC_DPB_ENTRY_RPS_ST_CURR_BEFORE 0x01 +#define V4L2_HEVC_DPB_ENTRY_RPS_ST_CURR_AFTER 0x02 +#define V4L2_HEVC_DPB_ENTRY_RPS_LT_CURR 0x03 + +#define V4L2_HEVC_DPB_ENTRIES_NUM_MAX 16 + +struct v4l2_hevc_dpb_entry { + __u64 timestamp; + __u8 rps; + __u8 field_pic; + __u16 pic_order_cnt[2]; + __u8 padding[2]; +}; + +struct v4l2_hevc_pred_weight_table { + __s8 delta_luma_weight_l0[V4L2_HEVC_DPB_ENTRIES_NUM_MAX]; + __s8 luma_offset_l0[V4L2_HEVC_DPB_ENTRIES_NUM_MAX]; + __s8 delta_chroma_weight_l0[V4L2_HEVC_DPB_ENTRIES_NUM_MAX][2]; + __s8 chroma_offset_l0[V4L2_HEVC_DPB_ENTRIES_NUM_MAX][2]; + + __s8 delta_luma_weight_l1[V4L2_HEVC_DPB_ENTRIES_NUM_MAX]; + __s8 luma_offset_l1[V4L2_HEVC_DPB_ENTRIES_NUM_MAX]; + __s8 delta_chroma_weight_l1[V4L2_HEVC_DPB_ENTRIES_NUM_MAX][2]; + __s8 chroma_offset_l1[V4L2_HEVC_DPB_ENTRIES_NUM_MAX][2]; + + __u8 padding[6]; + + __u8 luma_log2_weight_denom; + __s8 delta_chroma_log2_weight_denom; +}; + +#define V4L2_HEVC_SLICE_PARAMS_FLAG_SLICE_SAO_LUMA (1ULL << 0) +#define V4L2_HEVC_SLICE_PARAMS_FLAG_SLICE_SAO_CHROMA (1ULL << 1) +#define V4L2_HEVC_SLICE_PARAMS_FLAG_SLICE_TEMPORAL_MVP_ENABLED (1ULL << 2) +#define V4L2_HEVC_SLICE_PARAMS_FLAG_MVD_L1_ZERO (1ULL << 3) +#define V4L2_HEVC_SLICE_PARAMS_FLAG_CABAC_INIT (1ULL << 4) +#define V4L2_HEVC_SLICE_PARAMS_FLAG_COLLOCATED_FROM_L0 (1ULL << 5) +#define V4L2_HEVC_SLICE_PARAMS_FLAG_USE_INTEGER_MV (1ULL << 6) +#define V4L2_HEVC_SLICE_PARAMS_FLAG_SLICE_DEBLOCKING_FILTER_DISABLED (1ULL << 7) +#define V4L2_HEVC_SLICE_PARAMS_FLAG_SLICE_LOOP_FILTER_ACROSS_SLICES_ENABLED (1ULL << 8) +#define V4L2_HEVC_SLICE_PARAMS_FLAG_DEPENDENT_SLICE_SEGMENT (1ULL << 9) + +struct v4l2_ctrl_hevc_slice_params { + __u32 bit_size; + __u32 data_bit_offset; + + /* ISO/IEC 23008-2, ITU-T Rec. H.265: NAL unit header */ + __u8 nal_unit_type; + __u8 nuh_temporal_id_plus1; + + /* ISO/IEC 23008-2, ITU-T Rec. H.265: General slice segment header */ + __u8 slice_type; + __u8 colour_plane_id; + __u16 slice_pic_order_cnt; + __u8 num_ref_idx_l0_active_minus1; + __u8 num_ref_idx_l1_active_minus1; + __u8 collocated_ref_idx; + __u8 five_minus_max_num_merge_cand; + __s8 slice_qp_delta; + __s8 slice_cb_qp_offset; + __s8 slice_cr_qp_offset; + __s8 slice_act_y_qp_offset; + __s8 slice_act_cb_qp_offset; + __s8 slice_act_cr_qp_offset; + __s8 slice_beta_offset_div2; + __s8 slice_tc_offset_div2; + + /* ISO/IEC 23008-2, ITU-T Rec. H.265: Picture timing SEI message */ + __u8 pic_struct; + + /* ISO/IEC 23008-2, ITU-T Rec. H.265: General slice segment header */ + __u8 num_active_dpb_entries; + __u8 ref_idx_l0[V4L2_HEVC_DPB_ENTRIES_NUM_MAX]; + __u8 ref_idx_l1[V4L2_HEVC_DPB_ENTRIES_NUM_MAX]; + + __u8 num_rps_poc_st_curr_before; + __u8 num_rps_poc_st_curr_after; + __u8 num_rps_poc_lt_curr; + + __u8 padding; + + /* ISO/IEC 23008-2, ITU-T Rec. H.265: General slice segment header */ + struct v4l2_hevc_dpb_entry dpb[V4L2_HEVC_DPB_ENTRIES_NUM_MAX]; + + /* ISO/IEC 23008-2, ITU-T Rec. H.265: Weighted prediction parameter */ + struct v4l2_hevc_pred_weight_table pred_weight_table; + + __u64 flags; +}; + +#endif diff --git a/include/media/i2c/ad9389b.h b/include/media/i2c/ad9389b.h new file mode 100644 index 000000000..30f9ea9a1 --- /dev/null +++ b/include/media/i2c/ad9389b.h @@ -0,0 +1,37 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Analog Devices AD9389B/AD9889B video encoder driver header + * + * Copyright 2012 Cisco Systems, Inc. and/or its affiliates. All rights reserved. + */ + +#ifndef AD9389B_H +#define AD9389B_H + +enum ad9389b_tmds_pll_gear { + AD9389B_TMDS_PLL_GEAR_AUTOMATIC, + AD9389B_TMDS_PLL_GEAR_SEMI_AUTOMATIC, +}; + +/* Platform dependent definitions */ +struct ad9389b_platform_data { + enum ad9389b_tmds_pll_gear tmds_pll_gear ; + /* Differential Data/Clock Output Drive Strength (reg. 0xa2/0xa3) */ + u8 diff_data_drive_strength; + u8 diff_clk_drive_strength; +}; + +/* notify events */ +#define AD9389B_MONITOR_DETECT 0 +#define AD9389B_EDID_DETECT 1 + +struct ad9389b_monitor_detect { + int present; +}; + +struct ad9389b_edid_detect { + int present; + int segment; +}; + +#endif diff --git a/include/media/i2c/adp1653.h b/include/media/i2c/adp1653.h new file mode 100644 index 000000000..096de9130 --- /dev/null +++ b/include/media/i2c/adp1653.h @@ -0,0 +1,114 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * include/media/i2c/adp1653.h + * + * Copyright (C) 2008--2011 Nokia Corporation + * + * Contact: Sakari Ailus <sakari.ailus@iki.fi> + * + * Contributors: + * Sakari Ailus <sakari.ailus@iki.fi> + * Tuukka Toivonen <tuukkat76@gmail.com> + */ + +#ifndef ADP1653_H +#define ADP1653_H + +#include <linux/i2c.h> +#include <linux/mutex.h> +#include <linux/videodev2.h> +#include <media/v4l2-ctrls.h> +#include <media/v4l2-subdev.h> + +#define ADP1653_NAME "adp1653" +#define ADP1653_I2C_ADDR (0x60 >> 1) + +/* Register definitions */ +#define ADP1653_REG_OUT_SEL 0x00 +#define ADP1653_REG_OUT_SEL_HPLED_TORCH_MIN 0x01 +#define ADP1653_REG_OUT_SEL_HPLED_TORCH_MAX 0x0b +#define ADP1653_REG_OUT_SEL_HPLED_FLASH_MIN 0x0c +#define ADP1653_REG_OUT_SEL_HPLED_FLASH_MAX 0x1f +#define ADP1653_REG_OUT_SEL_HPLED_SHIFT 3 +#define ADP1653_REG_OUT_SEL_ILED_MAX 0x07 +#define ADP1653_REG_OUT_SEL_ILED_SHIFT 0 + +#define ADP1653_REG_CONFIG 0x01 +#define ADP1653_REG_CONFIG_TMR_CFG (1 << 4) +#define ADP1653_REG_CONFIG_TMR_SET_MAX 0x0f +#define ADP1653_REG_CONFIG_TMR_SET_SHIFT 0 + +#define ADP1653_REG_SW_STROBE 0x02 +#define ADP1653_REG_SW_STROBE_SW_STROBE (1 << 0) + +#define ADP1653_REG_FAULT 0x03 +#define ADP1653_REG_FAULT_FLT_SCP (1 << 3) +#define ADP1653_REG_FAULT_FLT_OT (1 << 2) +#define ADP1653_REG_FAULT_FLT_TMR (1 << 1) +#define ADP1653_REG_FAULT_FLT_OV (1 << 0) + +#define ADP1653_INDICATOR_INTENSITY_MIN 0 +#define ADP1653_INDICATOR_INTENSITY_STEP 2500 +#define ADP1653_INDICATOR_INTENSITY_MAX \ + (ADP1653_REG_OUT_SEL_ILED_MAX * ADP1653_INDICATOR_INTENSITY_STEP) +#define ADP1653_INDICATOR_INTENSITY_uA_TO_REG(a) \ + ((a) / ADP1653_INDICATOR_INTENSITY_STEP) +#define ADP1653_INDICATOR_INTENSITY_REG_TO_uA(a) \ + ((a) * ADP1653_INDICATOR_INTENSITY_STEP) + +#define ADP1653_FLASH_INTENSITY_BASE 35 +#define ADP1653_FLASH_INTENSITY_STEP 15 +#define ADP1653_FLASH_INTENSITY_MIN \ + (ADP1653_FLASH_INTENSITY_BASE \ + + ADP1653_REG_OUT_SEL_HPLED_FLASH_MIN * ADP1653_FLASH_INTENSITY_STEP) +#define ADP1653_FLASH_INTENSITY_MAX \ + (ADP1653_FLASH_INTENSITY_MIN + \ + (ADP1653_REG_OUT_SEL_HPLED_FLASH_MAX - \ + ADP1653_REG_OUT_SEL_HPLED_FLASH_MIN + 1) * \ + ADP1653_FLASH_INTENSITY_STEP) + +#define ADP1653_FLASH_INTENSITY_mA_TO_REG(a) \ + ((a) < ADP1653_FLASH_INTENSITY_BASE ? 0 : \ + (((a) - ADP1653_FLASH_INTENSITY_BASE) / ADP1653_FLASH_INTENSITY_STEP)) +#define ADP1653_FLASH_INTENSITY_REG_TO_mA(a) \ + ((a) * ADP1653_FLASH_INTENSITY_STEP + ADP1653_FLASH_INTENSITY_BASE) + +#define ADP1653_TORCH_INTENSITY_MIN \ + (ADP1653_FLASH_INTENSITY_BASE \ + + ADP1653_REG_OUT_SEL_HPLED_TORCH_MIN * ADP1653_FLASH_INTENSITY_STEP) +#define ADP1653_TORCH_INTENSITY_MAX \ + (ADP1653_TORCH_INTENSITY_MIN + \ + (ADP1653_REG_OUT_SEL_HPLED_TORCH_MAX - \ + ADP1653_REG_OUT_SEL_HPLED_TORCH_MIN + 1) * \ + ADP1653_FLASH_INTENSITY_STEP) + +struct adp1653_platform_data { + int (*power)(struct v4l2_subdev *sd, int on); + + u32 max_flash_timeout; /* flash light timeout in us */ + u32 max_flash_intensity; /* led intensity, flash mode, mA */ + u32 max_torch_intensity; /* led intensity, torch mode, mA */ + u32 max_indicator_intensity; /* indicator led intensity, uA */ + + struct gpio_desc *enable_gpio; /* for device-tree based boot */ +}; + +#define to_adp1653_flash(sd) container_of(sd, struct adp1653_flash, subdev) + +struct adp1653_flash { + struct v4l2_subdev subdev; + struct adp1653_platform_data *platform_data; + + struct v4l2_ctrl_handler ctrls; + struct v4l2_ctrl *led_mode; + struct v4l2_ctrl *flash_timeout; + struct v4l2_ctrl *flash_intensity; + struct v4l2_ctrl *torch_intensity; + struct v4l2_ctrl *indicator_intensity; + + struct mutex power_lock; + int power_count; + int fault; +}; + +#endif /* ADP1653_H */ diff --git a/include/media/i2c/adv7183.h b/include/media/i2c/adv7183.h new file mode 100644 index 000000000..49faece29 --- /dev/null +++ b/include/media/i2c/adv7183.h @@ -0,0 +1,35 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * adv7183.h - definition for adv7183 inputs and outputs + * + * Copyright (c) 2011 Analog Devices Inc. + */ + +#ifndef _ADV7183_H_ +#define _ADV7183_H_ + +/* ADV7183 HW inputs */ +#define ADV7183_COMPOSITE0 0 /* CVBS in on AIN1 */ +#define ADV7183_COMPOSITE1 1 /* CVBS in on AIN2 */ +#define ADV7183_COMPOSITE2 2 /* CVBS in on AIN3 */ +#define ADV7183_COMPOSITE3 3 /* CVBS in on AIN4 */ +#define ADV7183_COMPOSITE4 4 /* CVBS in on AIN5 */ +#define ADV7183_COMPOSITE5 5 /* CVBS in on AIN6 */ +#define ADV7183_COMPOSITE6 6 /* CVBS in on AIN7 */ +#define ADV7183_COMPOSITE7 7 /* CVBS in on AIN8 */ +#define ADV7183_COMPOSITE8 8 /* CVBS in on AIN9 */ +#define ADV7183_COMPOSITE9 9 /* CVBS in on AIN10 */ +#define ADV7183_COMPOSITE10 10 /* CVBS in on AIN11 */ + +#define ADV7183_SVIDEO0 11 /* Y on AIN1, C on AIN4 */ +#define ADV7183_SVIDEO1 12 /* Y on AIN2, C on AIN5 */ +#define ADV7183_SVIDEO2 13 /* Y on AIN3, C on AIN6 */ + +#define ADV7183_COMPONENT0 14 /* Y on AIN1, Pr on AIN4, Pb on AIN5 */ +#define ADV7183_COMPONENT1 15 /* Y on AIN2, Pr on AIN3, Pb on AIN6 */ + +/* ADV7183 HW outputs */ +#define ADV7183_8BIT_OUT 0 +#define ADV7183_16BIT_OUT 1 + +#endif diff --git a/include/media/i2c/adv7343.h b/include/media/i2c/adv7343.h new file mode 100644 index 000000000..e4142b1ef --- /dev/null +++ b/include/media/i2c/adv7343.h @@ -0,0 +1,63 @@ +/* + * ADV7343 header file + * + * Copyright (C) 2009 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed .as is. WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef ADV7343_H +#define ADV7343_H + +#define ADV7343_COMPOSITE_ID (0) +#define ADV7343_COMPONENT_ID (1) +#define ADV7343_SVIDEO_ID (2) + +/** + * adv7343_power_mode - power mode configuration. + * @sleep_mode: on enable the current consumption is reduced to micro ampere + * level. All DACs and the internal PLL circuit are disabled. + * Registers can be read from and written in sleep mode. + * @pll_control: PLL and oversampling control. This control allows internal + * PLL 1 circuit to be powered down and the oversampling to be + * switched off. + * @dac: array to configure power on/off DAC's 1..6 + * + * Power mode register (Register 0x0), for more info refer REGISTER MAP ACCESS + * section of datasheet[1], table 17 page no 30. + * + * [1] http://www.analog.com/static/imported-files/data_sheets/ADV7342_7343.pdf + */ +struct adv7343_power_mode { + bool sleep_mode; + bool pll_control; + u32 dac[6]; +}; + +/** + * struct adv7343_sd_config - SD Only Output Configuration. + * @sd_dac_out: array configuring SD DAC Outputs 1 and 2 + */ +struct adv7343_sd_config { + /* SD only Output Configuration */ + u32 sd_dac_out[2]; +}; + +/** + * struct adv7343_platform_data - Platform data values and access functions. + * @mode_config: Configuration for power mode. + * @sd_config: SD Only Configuration. + */ +struct adv7343_platform_data { + struct adv7343_power_mode mode_config; + struct adv7343_sd_config sd_config; +}; + +#endif /* End of #ifndef ADV7343_H */ diff --git a/include/media/i2c/adv7393.h b/include/media/i2c/adv7393.h new file mode 100644 index 000000000..b28edf351 --- /dev/null +++ b/include/media/i2c/adv7393.h @@ -0,0 +1,28 @@ +/* + * ADV7393 header file + * + * Copyright (C) 2010-2012 ADVANSEE - http://www.advansee.com/ + * Benoît Thébaudeau <benoit.thebaudeau@advansee.com> + * + * Based on ADV7343 driver, + * + * Copyright (C) 2009 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed .as is. WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef ADV7393_H +#define ADV7393_H + +#define ADV7393_COMPOSITE_ID (0) +#define ADV7393_COMPONENT_ID (1) +#define ADV7393_SVIDEO_ID (2) + +#endif /* End of #ifndef ADV7393_H */ diff --git a/include/media/i2c/adv7511.h b/include/media/i2c/adv7511.h new file mode 100644 index 000000000..1874c05f4 --- /dev/null +++ b/include/media/i2c/adv7511.h @@ -0,0 +1,33 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Analog Devices ADV7511 HDMI Transmitter Device Driver + * + * Copyright 2013 Cisco Systems, Inc. and/or its affiliates. All rights reserved. + */ + +#ifndef ADV7511_H +#define ADV7511_H + +/* notify events */ +#define ADV7511_MONITOR_DETECT 0 +#define ADV7511_EDID_DETECT 1 + + +struct adv7511_monitor_detect { + int present; +}; + +struct adv7511_edid_detect { + int present; + int segment; + uint16_t phys_addr; +}; + +struct adv7511_platform_data { + u8 i2c_edid; + u8 i2c_cec; + u8 i2c_pktmem; + u32 cec_clk; +}; + +#endif diff --git a/include/media/i2c/adv7604.h b/include/media/i2c/adv7604.h new file mode 100644 index 000000000..77a979912 --- /dev/null +++ b/include/media/i2c/adv7604.h @@ -0,0 +1,157 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * adv7604 - Analog Devices ADV7604 video decoder driver + * + * Copyright 2012 Cisco Systems, Inc. and/or its affiliates. All rights reserved. + */ + +#ifndef _ADV7604_ +#define _ADV7604_ + +#include <linux/types.h> + +/* Analog input muxing modes (AFE register 0x02, [2:0]) */ +enum adv7604_ain_sel { + ADV7604_AIN1_2_3_NC_SYNC_1_2 = 0, + ADV7604_AIN4_5_6_NC_SYNC_2_1 = 1, + ADV7604_AIN7_8_9_NC_SYNC_3_1 = 2, + ADV7604_AIN10_11_12_NC_SYNC_4_1 = 3, + ADV7604_AIN9_4_5_6_SYNC_2_1 = 4, +}; + +/* + * Bus rotation and reordering. This is used to specify component reordering on + * the board and describes the components order on the bus when the ADV7604 + * outputs RGB. + */ +enum adv7604_bus_order { + ADV7604_BUS_ORDER_RGB, /* No operation */ + ADV7604_BUS_ORDER_GRB, /* Swap 1-2 */ + ADV7604_BUS_ORDER_RBG, /* Swap 2-3 */ + ADV7604_BUS_ORDER_BGR, /* Swap 1-3 */ + ADV7604_BUS_ORDER_BRG, /* Rotate right */ + ADV7604_BUS_ORDER_GBR, /* Rotate left */ +}; + +/* Input Color Space (IO register 0x02, [7:4]) */ +enum adv76xx_inp_color_space { + ADV76XX_INP_COLOR_SPACE_LIM_RGB = 0, + ADV76XX_INP_COLOR_SPACE_FULL_RGB = 1, + ADV76XX_INP_COLOR_SPACE_LIM_YCbCr_601 = 2, + ADV76XX_INP_COLOR_SPACE_LIM_YCbCr_709 = 3, + ADV76XX_INP_COLOR_SPACE_XVYCC_601 = 4, + ADV76XX_INP_COLOR_SPACE_XVYCC_709 = 5, + ADV76XX_INP_COLOR_SPACE_FULL_YCbCr_601 = 6, + ADV76XX_INP_COLOR_SPACE_FULL_YCbCr_709 = 7, + ADV76XX_INP_COLOR_SPACE_AUTO = 0xf, +}; + +/* Select output format (IO register 0x03, [4:2]) */ +enum adv7604_op_format_mode_sel { + ADV7604_OP_FORMAT_MODE0 = 0x00, + ADV7604_OP_FORMAT_MODE1 = 0x04, + ADV7604_OP_FORMAT_MODE2 = 0x08, +}; + +enum adv76xx_drive_strength { + ADV76XX_DR_STR_MEDIUM_LOW = 1, + ADV76XX_DR_STR_MEDIUM_HIGH = 2, + ADV76XX_DR_STR_HIGH = 3, +}; + +/* INT1 Configuration (IO register 0x40, [1:0]) */ +enum adv76xx_int1_config { + ADV76XX_INT1_CONFIG_OPEN_DRAIN, + ADV76XX_INT1_CONFIG_ACTIVE_LOW, + ADV76XX_INT1_CONFIG_ACTIVE_HIGH, + ADV76XX_INT1_CONFIG_DISABLED, +}; + +enum adv76xx_page { + ADV76XX_PAGE_IO, + ADV7604_PAGE_AVLINK, + ADV76XX_PAGE_CEC, + ADV76XX_PAGE_INFOFRAME, + ADV7604_PAGE_ESDP, + ADV7604_PAGE_DPP, + ADV76XX_PAGE_AFE, + ADV76XX_PAGE_REP, + ADV76XX_PAGE_EDID, + ADV76XX_PAGE_HDMI, + ADV76XX_PAGE_TEST, + ADV76XX_PAGE_CP, + ADV7604_PAGE_VDP, + ADV76XX_PAGE_MAX, +}; + +/* Platform dependent definition */ +struct adv76xx_platform_data { + /* DIS_PWRDNB: 1 if the PWRDNB pin is unused and unconnected */ + unsigned disable_pwrdnb:1; + + /* DIS_CABLE_DET_RST: 1 if the 5V pins are unused and unconnected */ + unsigned disable_cable_det_rst:1; + + int default_input; + + /* Analog input muxing mode */ + enum adv7604_ain_sel ain_sel; + + /* Bus rotation and reordering */ + enum adv7604_bus_order bus_order; + + /* Select output format mode */ + enum adv7604_op_format_mode_sel op_format_mode_sel; + + /* Configuration of the INT1 pin */ + enum adv76xx_int1_config int1_config; + + /* IO register 0x02 */ + unsigned alt_gamma:1; + + /* IO register 0x05 */ + unsigned blank_data:1; + unsigned insert_av_codes:1; + unsigned replicate_av_codes:1; + + /* IO register 0x06 */ + unsigned inv_vs_pol:1; + unsigned inv_hs_pol:1; + unsigned inv_llc_pol:1; + + /* IO register 0x14 */ + enum adv76xx_drive_strength dr_str_data; + enum adv76xx_drive_strength dr_str_clk; + enum adv76xx_drive_strength dr_str_sync; + + /* IO register 0x30 */ + unsigned output_bus_lsb_to_msb:1; + + /* Free run */ + unsigned hdmi_free_run_mode; + + /* i2c addresses: 0 == use default */ + u8 i2c_addresses[ADV76XX_PAGE_MAX]; +}; + +enum adv76xx_pad { + ADV76XX_PAD_HDMI_PORT_A = 0, + ADV7604_PAD_HDMI_PORT_B = 1, + ADV7604_PAD_HDMI_PORT_C = 2, + ADV7604_PAD_HDMI_PORT_D = 3, + ADV7604_PAD_VGA_RGB = 4, + ADV7604_PAD_VGA_COMP = 5, + /* The source pad is either 1 (ADV7611) or 6 (ADV7604) */ + ADV7604_PAD_SOURCE = 6, + ADV7611_PAD_SOURCE = 1, + ADV76XX_PAD_MAX = 7, +}; + +#define V4L2_CID_ADV_RX_ANALOG_SAMPLING_PHASE (V4L2_CID_DV_CLASS_BASE + 0x1000) +#define V4L2_CID_ADV_RX_FREE_RUN_COLOR_MANUAL (V4L2_CID_DV_CLASS_BASE + 0x1001) +#define V4L2_CID_ADV_RX_FREE_RUN_COLOR (V4L2_CID_DV_CLASS_BASE + 0x1002) + +/* notify events */ +#define ADV76XX_HOTPLUG 1 + +#endif diff --git a/include/media/i2c/adv7842.h b/include/media/i2c/adv7842.h new file mode 100644 index 000000000..05e01f0dd --- /dev/null +++ b/include/media/i2c/adv7842.h @@ -0,0 +1,227 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * adv7842 - Analog Devices ADV7842 video decoder driver + * + * Copyright 2013 Cisco Systems, Inc. and/or its affiliates. All rights reserved. + */ + +#ifndef _ADV7842_ +#define _ADV7842_ + +/* Analog input muxing modes (AFE register 0x02, [2:0]) */ +enum adv7842_ain_sel { + ADV7842_AIN1_2_3_NC_SYNC_1_2 = 0, + ADV7842_AIN4_5_6_NC_SYNC_2_1 = 1, + ADV7842_AIN7_8_9_NC_SYNC_3_1 = 2, + ADV7842_AIN10_11_12_NC_SYNC_4_1 = 3, + ADV7842_AIN9_4_5_6_SYNC_2_1 = 4, +}; + +/* + * Bus rotation and reordering. This is used to specify component reordering on + * the board and describes the components order on the bus when the ADV7842 + * outputs RGB. + */ +enum adv7842_bus_order { + ADV7842_BUS_ORDER_RGB, /* No operation */ + ADV7842_BUS_ORDER_GRB, /* Swap 1-2 */ + ADV7842_BUS_ORDER_RBG, /* Swap 2-3 */ + ADV7842_BUS_ORDER_BGR, /* Swap 1-3 */ + ADV7842_BUS_ORDER_BRG, /* Rotate right */ + ADV7842_BUS_ORDER_GBR, /* Rotate left */ +}; + +/* Input Color Space (IO register 0x02, [7:4]) */ +enum adv7842_inp_color_space { + ADV7842_INP_COLOR_SPACE_LIM_RGB = 0, + ADV7842_INP_COLOR_SPACE_FULL_RGB = 1, + ADV7842_INP_COLOR_SPACE_LIM_YCbCr_601 = 2, + ADV7842_INP_COLOR_SPACE_LIM_YCbCr_709 = 3, + ADV7842_INP_COLOR_SPACE_XVYCC_601 = 4, + ADV7842_INP_COLOR_SPACE_XVYCC_709 = 5, + ADV7842_INP_COLOR_SPACE_FULL_YCbCr_601 = 6, + ADV7842_INP_COLOR_SPACE_FULL_YCbCr_709 = 7, + ADV7842_INP_COLOR_SPACE_AUTO = 0xf, +}; + +/* Select output format (IO register 0x03, [4:2]) */ +enum adv7842_op_format_mode_sel { + ADV7842_OP_FORMAT_MODE0 = 0x00, + ADV7842_OP_FORMAT_MODE1 = 0x04, + ADV7842_OP_FORMAT_MODE2 = 0x08, +}; + +/* Mode of operation */ +enum adv7842_mode { + ADV7842_MODE_SDP, + ADV7842_MODE_COMP, + ADV7842_MODE_RGB, + ADV7842_MODE_HDMI +}; + +/* Video standard select (IO register 0x00, [5:0]) */ +enum adv7842_vid_std_select { + /* SDP */ + ADV7842_SDP_VID_STD_CVBS_SD_4x1 = 0x01, + ADV7842_SDP_VID_STD_YC_SD4_x1 = 0x09, + /* RGB */ + ADV7842_RGB_VID_STD_AUTO_GRAPH_MODE = 0x07, + /* HDMI GR */ + ADV7842_HDMI_GR_VID_STD_AUTO_GRAPH_MODE = 0x02, + /* HDMI COMP */ + ADV7842_HDMI_COMP_VID_STD_HD_1250P = 0x1e, +}; + +enum adv7842_select_input { + ADV7842_SELECT_HDMI_PORT_A, + ADV7842_SELECT_HDMI_PORT_B, + ADV7842_SELECT_VGA_RGB, + ADV7842_SELECT_VGA_COMP, + ADV7842_SELECT_SDP_CVBS, + ADV7842_SELECT_SDP_YC, +}; + +enum adv7842_drive_strength { + ADV7842_DR_STR_LOW = 0, + ADV7842_DR_STR_MEDIUM_LOW = 1, + ADV7842_DR_STR_MEDIUM_HIGH = 2, + ADV7842_DR_STR_HIGH = 3, +}; + +struct adv7842_sdp_csc_coeff { + bool manual; + u16 scaling; + u16 A1; + u16 A2; + u16 A3; + u16 A4; + u16 B1; + u16 B2; + u16 B3; + u16 B4; + u16 C1; + u16 C2; + u16 C3; + u16 C4; +}; + +struct adv7842_sdp_io_sync_adjustment { + bool adjust; + u16 hs_beg; + u16 hs_width; + u16 de_beg; + u16 de_end; + u8 vs_beg_o; + u8 vs_beg_e; + u8 vs_end_o; + u8 vs_end_e; + u8 de_v_beg_o; + u8 de_v_beg_e; + u8 de_v_end_o; + u8 de_v_end_e; +}; + +/* Platform dependent definition */ +struct adv7842_platform_data { + /* chip reset during probe */ + unsigned chip_reset:1; + + /* DIS_PWRDNB: 1 if the PWRDNB pin is unused and unconnected */ + unsigned disable_pwrdnb:1; + + /* DIS_CABLE_DET_RST: 1 if the 5V pins are unused and unconnected */ + unsigned disable_cable_det_rst:1; + + /* Analog input muxing mode */ + enum adv7842_ain_sel ain_sel; + + /* Bus rotation and reordering */ + enum adv7842_bus_order bus_order; + + /* Select output format mode */ + enum adv7842_op_format_mode_sel op_format_mode_sel; + + /* Default mode */ + enum adv7842_mode mode; + + /* Default input */ + unsigned input; + + /* Video standard */ + enum adv7842_vid_std_select vid_std_select; + + /* IO register 0x02 */ + unsigned alt_gamma:1; + + /* IO register 0x05 */ + unsigned blank_data:1; + unsigned insert_av_codes:1; + unsigned replicate_av_codes:1; + + /* IO register 0x30 */ + unsigned output_bus_lsb_to_msb:1; + + /* IO register 0x14 */ + enum adv7842_drive_strength dr_str_data; + enum adv7842_drive_strength dr_str_clk; + enum adv7842_drive_strength dr_str_sync; + + /* + * IO register 0x19: Adjustment to the LLC DLL phase in + * increments of 1/32 of a clock period. + */ + unsigned llc_dll_phase:5; + + /* External RAM for 3-D comb or frame synchronizer */ + unsigned sd_ram_size; /* ram size in MB */ + unsigned sd_ram_ddr:1; /* ddr or sdr sdram */ + + /* HDMI free run, CP-reg 0xBA */ + unsigned hdmi_free_run_enable:1; + /* 0 = Mode 0: run when there is no TMDS clock + 1 = Mode 1: run when there is no TMDS clock or the + video resolution does not match programmed one. */ + unsigned hdmi_free_run_mode:1; + + /* SDP free run, CP-reg 0xDD */ + unsigned sdp_free_run_auto:1; + unsigned sdp_free_run_man_col_en:1; + unsigned sdp_free_run_cbar_en:1; + unsigned sdp_free_run_force:1; + + /* HPA manual (0) or auto (1), affects HDMI register 0x69 */ + unsigned hpa_auto:1; + + struct adv7842_sdp_csc_coeff sdp_csc_coeff; + + struct adv7842_sdp_io_sync_adjustment sdp_io_sync_625; + struct adv7842_sdp_io_sync_adjustment sdp_io_sync_525; + + /* i2c addresses */ + u8 i2c_sdp_io; + u8 i2c_sdp; + u8 i2c_cp; + u8 i2c_vdp; + u8 i2c_afe; + u8 i2c_hdmi; + u8 i2c_repeater; + u8 i2c_edid; + u8 i2c_infoframe; + u8 i2c_cec; + u8 i2c_avlink; +}; + +#define V4L2_CID_ADV_RX_ANALOG_SAMPLING_PHASE (V4L2_CID_DV_CLASS_BASE + 0x1000) +#define V4L2_CID_ADV_RX_FREE_RUN_COLOR_MANUAL (V4L2_CID_DV_CLASS_BASE + 0x1001) +#define V4L2_CID_ADV_RX_FREE_RUN_COLOR (V4L2_CID_DV_CLASS_BASE + 0x1002) + +/* custom ioctl, used to test the external RAM that's used by the + * deinterlacer. */ +#define ADV7842_CMD_RAM_TEST _IO('V', BASE_VIDIOC_PRIVATE) + +#define ADV7842_EDID_PORT_A 0 +#define ADV7842_EDID_PORT_B 1 +#define ADV7842_EDID_PORT_VGA 2 +#define ADV7842_PAD_SOURCE 3 + +#endif diff --git a/include/media/i2c/ak881x.h b/include/media/i2c/ak881x.h new file mode 100644 index 000000000..ff0597131 --- /dev/null +++ b/include/media/i2c/ak881x.h @@ -0,0 +1,22 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Header for AK8813 / AK8814 TV-ecoders from Asahi Kasei Microsystems Co., Ltd. (AKM) + * + * Copyright (C) 2010, Guennadi Liakhovetski <g.liakhovetski@gmx.de> + */ + +#ifndef AK881X_H +#define AK881X_H + +#define AK881X_IF_MODE_MASK (3 << 0) +#define AK881X_IF_MODE_BT656 (0 << 0) +#define AK881X_IF_MODE_MASTER (1 << 0) +#define AK881X_IF_MODE_SLAVE (2 << 0) +#define AK881X_FIELD (1 << 2) +#define AK881X_COMPONENT (1 << 3) + +struct ak881x_pdata { + unsigned long flags; +}; + +#endif diff --git a/include/media/i2c/bt819.h b/include/media/i2c/bt819.h new file mode 100644 index 000000000..70aa46bd5 --- /dev/null +++ b/include/media/i2c/bt819.h @@ -0,0 +1,24 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + bt819.h - bt819 notifications + + Copyright (C) 2009 Hans Verkuil (hverkuil@xs4all.nl) + +*/ + +#ifndef _BT819_H_ +#define _BT819_H_ + +#include <linux/ioctl.h> + +/* v4l2_device notifications. */ + +/* Needed to reset the FIFO buffer when changing the input + or the video standard. + + Note: these ioctls that internal to the kernel and are never called + from userspace. */ +#define BT819_FIFO_RESET_LOW _IO('b', 0) +#define BT819_FIFO_RESET_HIGH _IO('b', 1) + +#endif diff --git a/include/media/i2c/cs5345.h b/include/media/i2c/cs5345.h new file mode 100644 index 000000000..d41e4dca3 --- /dev/null +++ b/include/media/i2c/cs5345.h @@ -0,0 +1,27 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + cs5345.h - definition for cs5345 inputs and outputs + + Copyright (C) 2007 Hans Verkuil (hverkuil@xs4all.nl) + +*/ + +#ifndef _CS5345_H_ +#define _CS5345_H_ + +/* CS5345 HW inputs */ +#define CS5345_IN_MIC 0 +#define CS5345_IN_1 1 +#define CS5345_IN_2 2 +#define CS5345_IN_3 3 +#define CS5345_IN_4 4 +#define CS5345_IN_5 5 +#define CS5345_IN_6 6 + +#define CS5345_MCLK_1 0x00 +#define CS5345_MCLK_1_5 0x10 +#define CS5345_MCLK_2 0x20 +#define CS5345_MCLK_3 0x30 +#define CS5345_MCLK_4 0x40 + +#endif diff --git a/include/media/i2c/cs53l32a.h b/include/media/i2c/cs53l32a.h new file mode 100644 index 000000000..52ceb2f91 --- /dev/null +++ b/include/media/i2c/cs53l32a.h @@ -0,0 +1,22 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + cs53l32a.h - definition for cs53l32a inputs and outputs + + Copyright (C) 2006 Hans Verkuil (hverkuil@xs4all.nl) + +*/ + +#ifndef _CS53L32A_H_ +#define _CS53L32A_H_ + +/* There are 2 physical inputs, but the second input can be + placed in two modes, the first mode bypasses the PGA (gain), + the second goes through the PGA. Hence there are three + possible inputs to choose from. */ + +/* CS53L32A HW inputs */ +#define CS53L32A_IN0 0 +#define CS53L32A_IN1 1 +#define CS53L32A_IN2 2 + +#endif diff --git a/include/media/i2c/ir-kbd-i2c.h b/include/media/i2c/ir-kbd-i2c.h new file mode 100644 index 000000000..9f47d6a48 --- /dev/null +++ b/include/media/i2c/ir-kbd-i2c.h @@ -0,0 +1,61 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef _IR_I2C +#define _IR_I2C + +#include <media/rc-core.h> + +#define DEFAULT_POLLING_INTERVAL 100 /* ms */ + +struct IR_i2c; + +struct IR_i2c { + char *ir_codes; + struct i2c_client *c; + struct rc_dev *rc; + + /* Used to avoid fast repeating */ + unsigned char old; + + u32 polling_interval; /* in ms */ + + struct delayed_work work; + char phys[32]; + int (*get_key)(struct IR_i2c *ir, + enum rc_proto *protocol, + u32 *scancode, u8 *toggle); + /* tx */ + struct i2c_client *tx_c; + struct mutex lock; /* do not poll Rx during Tx */ + unsigned int carrier; + unsigned int duty_cycle; +}; + +enum ir_kbd_get_key_fn { + IR_KBD_GET_KEY_CUSTOM = 0, + IR_KBD_GET_KEY_PIXELVIEW, + IR_KBD_GET_KEY_HAUP, + IR_KBD_GET_KEY_KNC1, + IR_KBD_GET_KEY_FUSIONHDTV, + IR_KBD_GET_KEY_HAUP_XVR, + IR_KBD_GET_KEY_AVERMEDIA_CARDBUS, +}; + +/* Can be passed when instantiating an ir_video i2c device */ +struct IR_i2c_init_data { + char *ir_codes; + const char *name; + u64 type; /* RC_PROTO_BIT_RC5, etc */ + u32 polling_interval; /* 0 means DEFAULT_POLLING_INTERVAL */ + + /* + * Specify either a function pointer or a value indicating one of + * ir_kbd_i2c's internal get_key functions + */ + int (*get_key)(struct IR_i2c *ir, + enum rc_proto *protocol, + u32 *scancode, u8 *toggle); + enum ir_kbd_get_key_fn internal_get_key_func; + + struct rc_dev *rc_dev; +}; +#endif diff --git a/include/media/i2c/lm3560.h b/include/media/i2c/lm3560.h new file mode 100644 index 000000000..770d8c72c --- /dev/null +++ b/include/media/i2c/lm3560.h @@ -0,0 +1,84 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * include/media/i2c/lm3560.h + * + * Copyright (C) 2013 Texas Instruments + * + * Contact: Daniel Jeong <gshark.jeong@gmail.com> + * Ldd-Mlp <ldd-mlp@list.ti.com> + */ + +#ifndef __LM3560_H__ +#define __LM3560_H__ + +#include <media/v4l2-subdev.h> + +#define LM3559_NAME "lm3559" +#define LM3560_NAME "lm3560" +#define LM3560_I2C_ADDR (0x53) + +/* FLASH Brightness + * min 62500uA, step 62500uA, max 1000000uA + */ +#define LM3560_FLASH_BRT_MIN 62500 +#define LM3560_FLASH_BRT_STEP 62500 +#define LM3560_FLASH_BRT_MAX 1000000 +#define LM3560_FLASH_BRT_uA_TO_REG(a) \ + ((a) < LM3560_FLASH_BRT_MIN ? 0 : \ + (((a) - LM3560_FLASH_BRT_MIN) / LM3560_FLASH_BRT_STEP)) +#define LM3560_FLASH_BRT_REG_TO_uA(a) \ + ((a) * LM3560_FLASH_BRT_STEP + LM3560_FLASH_BRT_MIN) + +/* FLASH TIMEOUT DURATION + * min 32ms, step 32ms, max 1024ms + */ +#define LM3560_FLASH_TOUT_MIN 32 +#define LM3560_FLASH_TOUT_STEP 32 +#define LM3560_FLASH_TOUT_MAX 1024 +#define LM3560_FLASH_TOUT_ms_TO_REG(a) \ + ((a) < LM3560_FLASH_TOUT_MIN ? 0 : \ + (((a) - LM3560_FLASH_TOUT_MIN) / LM3560_FLASH_TOUT_STEP)) +#define LM3560_FLASH_TOUT_REG_TO_ms(a) \ + ((a) * LM3560_FLASH_TOUT_STEP + LM3560_FLASH_TOUT_MIN) + +/* TORCH BRT + * min 31250uA, step 31250uA, max 250000uA + */ +#define LM3560_TORCH_BRT_MIN 31250 +#define LM3560_TORCH_BRT_STEP 31250 +#define LM3560_TORCH_BRT_MAX 250000 +#define LM3560_TORCH_BRT_uA_TO_REG(a) \ + ((a) < LM3560_TORCH_BRT_MIN ? 0 : \ + (((a) - LM3560_TORCH_BRT_MIN) / LM3560_TORCH_BRT_STEP)) +#define LM3560_TORCH_BRT_REG_TO_uA(a) \ + ((a) * LM3560_TORCH_BRT_STEP + LM3560_TORCH_BRT_MIN) + +enum lm3560_led_id { + LM3560_LED0 = 0, + LM3560_LED1, + LM3560_LED_MAX +}; + +enum lm3560_peak_current { + LM3560_PEAK_1600mA = 0x00, + LM3560_PEAK_2300mA = 0x20, + LM3560_PEAK_3000mA = 0x40, + LM3560_PEAK_3600mA = 0x60 +}; + +/* struct lm3560_platform_data + * + * @peak : peak current + * @max_flash_timeout: flash timeout + * @max_flash_brt: flash mode led brightness + * @max_torch_brt: torch mode led brightness + */ +struct lm3560_platform_data { + enum lm3560_peak_current peak; + + u32 max_flash_timeout; + u32 max_flash_brt[LM3560_LED_MAX]; + u32 max_torch_brt[LM3560_LED_MAX]; +}; + +#endif /* __LM3560_H__ */ diff --git a/include/media/i2c/lm3646.h b/include/media/i2c/lm3646.h new file mode 100644 index 000000000..845f07b89 --- /dev/null +++ b/include/media/i2c/lm3646.h @@ -0,0 +1,84 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * include/media/i2c/lm3646.h + * + * Copyright (C) 2014 Texas Instruments + * + * Contact: Daniel Jeong <gshark.jeong@gmail.com> + * Ldd-Mlp <ldd-mlp@list.ti.com> + */ + +#ifndef __LM3646_H__ +#define __LM3646_H__ + +#include <media/v4l2-subdev.h> + +#define LM3646_NAME "lm3646" +#define LM3646_I2C_ADDR_REV1 (0x67) +#define LM3646_I2C_ADDR_REV0 (0x63) + +/* TOTAL FLASH Brightness Max + * min 93350uA, step 93750uA, max 1499600uA + */ +#define LM3646_TOTAL_FLASH_BRT_MIN 93350 +#define LM3646_TOTAL_FLASH_BRT_STEP 93750 +#define LM3646_TOTAL_FLASH_BRT_MAX 1499600 +#define LM3646_TOTAL_FLASH_BRT_uA_TO_REG(a) \ + ((a) < LM3646_TOTAL_FLASH_BRT_MIN ? 0 : \ + ((((a) - LM3646_TOTAL_FLASH_BRT_MIN) / LM3646_TOTAL_FLASH_BRT_STEP))) + +/* TOTAL TORCH Brightness Max + * min 23040uA, step 23430uA, max 187100uA + */ +#define LM3646_TOTAL_TORCH_BRT_MIN 23040 +#define LM3646_TOTAL_TORCH_BRT_STEP 23430 +#define LM3646_TOTAL_TORCH_BRT_MAX 187100 +#define LM3646_TOTAL_TORCH_BRT_uA_TO_REG(a) \ + ((a) < LM3646_TOTAL_TORCH_BRT_MIN ? 0 : \ + ((((a) - LM3646_TOTAL_TORCH_BRT_MIN) / LM3646_TOTAL_TORCH_BRT_STEP))) + +/* LED1 FLASH Brightness + * min 23040uA, step 11718uA, max 1499600uA + */ +#define LM3646_LED1_FLASH_BRT_MIN 23040 +#define LM3646_LED1_FLASH_BRT_STEP 11718 +#define LM3646_LED1_FLASH_BRT_MAX 1499600 +#define LM3646_LED1_FLASH_BRT_uA_TO_REG(a) \ + ((a) <= LM3646_LED1_FLASH_BRT_MIN ? 0 : \ + ((((a) - LM3646_LED1_FLASH_BRT_MIN) / LM3646_LED1_FLASH_BRT_STEP))+1) + +/* LED1 TORCH Brightness + * min 2530uA, step 1460uA, max 187100uA + */ +#define LM3646_LED1_TORCH_BRT_MIN 2530 +#define LM3646_LED1_TORCH_BRT_STEP 1460 +#define LM3646_LED1_TORCH_BRT_MAX 187100 +#define LM3646_LED1_TORCH_BRT_uA_TO_REG(a) \ + ((a) <= LM3646_LED1_TORCH_BRT_MIN ? 0 : \ + ((((a) - LM3646_LED1_TORCH_BRT_MIN) / LM3646_LED1_TORCH_BRT_STEP))+1) + +/* FLASH TIMEOUT DURATION + * min 50ms, step 50ms, max 400ms + */ +#define LM3646_FLASH_TOUT_MIN 50 +#define LM3646_FLASH_TOUT_STEP 50 +#define LM3646_FLASH_TOUT_MAX 400 +#define LM3646_FLASH_TOUT_ms_TO_REG(a) \ + ((a) <= LM3646_FLASH_TOUT_MIN ? 0 : \ + (((a) - LM3646_FLASH_TOUT_MIN) / LM3646_FLASH_TOUT_STEP)) + +/* struct lm3646_platform_data + * + * @flash_timeout: flash timeout + * @led1_flash_brt: led1 flash mode brightness, uA + * @led1_torch_brt: led1 torch mode brightness, uA + */ +struct lm3646_platform_data { + + u32 flash_timeout; + + u32 led1_flash_brt; + u32 led1_torch_brt; +}; + +#endif /* __LM3646_H__ */ diff --git a/include/media/i2c/m52790.h b/include/media/i2c/m52790.h new file mode 100644 index 000000000..3f214fa9b --- /dev/null +++ b/include/media/i2c/m52790.h @@ -0,0 +1,81 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + m52790.h - definition for m52790 inputs and outputs + + Copyright (C) 2007 Hans Verkuil (hverkuil@xs4all.nl) + +*/ + +#ifndef _M52790_H_ +#define _M52790_H_ + +/* Input routing switch 1 */ + +#define M52790_SW1_IN_MASK 0x0003 +#define M52790_SW1_IN_TUNER 0x0000 +#define M52790_SW1_IN_V2 0x0001 +#define M52790_SW1_IN_V3 0x0002 +#define M52790_SW1_IN_V4 0x0003 + +/* Selects component input instead of composite */ +#define M52790_SW1_YCMIX 0x0004 + + +/* Input routing switch 2 */ + +#define M52790_SW2_IN_MASK 0x0300 +#define M52790_SW2_IN_TUNER 0x0000 +#define M52790_SW2_IN_V2 0x0100 +#define M52790_SW2_IN_V3 0x0200 +#define M52790_SW2_IN_V4 0x0300 + +/* Selects component input instead of composite */ +#define M52790_SW2_YCMIX 0x0400 + + +/* Output routing switch 1 */ + +/* Enable 6dB amplifier for composite out */ +#define M52790_SW1_V_AMP 0x0008 + +/* Enable 6dB amplifier for component out */ +#define M52790_SW1_YC_AMP 0x0010 + +/* Audio output mode */ +#define M52790_SW1_AUDIO_MASK 0x00c0 +#define M52790_SW1_AUDIO_MUTE 0x0000 +#define M52790_SW1_AUDIO_R 0x0040 +#define M52790_SW1_AUDIO_L 0x0080 +#define M52790_SW1_AUDIO_STEREO 0x00c0 + + +/* Output routing switch 2 */ + +/* Enable 6dB amplifier for composite out */ +#define M52790_SW2_V_AMP 0x0800 + +/* Enable 6dB amplifier for component out */ +#define M52790_SW2_YC_AMP 0x1000 + +/* Audio output mode */ +#define M52790_SW2_AUDIO_MASK 0xc000 +#define M52790_SW2_AUDIO_MUTE 0x0000 +#define M52790_SW2_AUDIO_R 0x4000 +#define M52790_SW2_AUDIO_L 0x8000 +#define M52790_SW2_AUDIO_STEREO 0xc000 + + +/* Common values */ +#define M52790_IN_TUNER (M52790_SW1_IN_TUNER | M52790_SW2_IN_TUNER) +#define M52790_IN_V2 (M52790_SW1_IN_V2 | M52790_SW2_IN_V2) +#define M52790_IN_V3 (M52790_SW1_IN_V3 | M52790_SW2_IN_V3) +#define M52790_IN_V4 (M52790_SW1_IN_V4 | M52790_SW2_IN_V4) + +#define M52790_OUT_STEREO (M52790_SW1_AUDIO_STEREO | \ + M52790_SW2_AUDIO_STEREO) +#define M52790_OUT_AMP_STEREO (M52790_SW1_AUDIO_STEREO | \ + M52790_SW1_V_AMP | \ + M52790_SW2_AUDIO_STEREO | \ + M52790_SW2_V_AMP) + +#endif diff --git a/include/media/i2c/m5mols.h b/include/media/i2c/m5mols.h new file mode 100644 index 000000000..9cec5a09e --- /dev/null +++ b/include/media/i2c/m5mols.h @@ -0,0 +1,29 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * Driver header for M-5MOLS 8M Pixel camera sensor with ISP + * + * Copyright (C) 2011 Samsung Electronics Co., Ltd. + * Author: HeungJun Kim <riverful.kim@samsung.com> + * + * Copyright (C) 2009 Samsung Electronics Co., Ltd. + * Author: Dongsoo Nathaniel Kim <dongsoo45.kim@samsung.com> + */ + +#ifndef MEDIA_M5MOLS_H +#define MEDIA_M5MOLS_H + +/** + * struct m5mols_platform_data - platform data for M-5MOLS driver + * @gpio_reset: GPIO driving the reset pin of M-5MOLS + * @reset_polarity: active state for gpio_reset pin, 0 or 1 + * @set_power: an additional callback to the board setup code + * to be called after enabling and before disabling + * the sensor's supply regulators + */ +struct m5mols_platform_data { + int gpio_reset; + u8 reset_polarity; + int (*set_power)(struct device *dev, int on); +}; + +#endif /* MEDIA_M5MOLS_H */ diff --git a/include/media/i2c/mt9m032.h b/include/media/i2c/mt9m032.h new file mode 100644 index 000000000..1bd587577 --- /dev/null +++ b/include/media/i2c/mt9m032.h @@ -0,0 +1,22 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Driver for MT9M032 CMOS Image Sensor from Micron + * + * Copyright (C) 2010-2011 Lund Engineering + * Contact: Gil Lund <gwlund@lundeng.com> + * Author: Martin Hostettler <martin@neutronstar.dyndns.org> + */ + +#ifndef MT9M032_H +#define MT9M032_H + +#define MT9M032_NAME "mt9m032" +#define MT9M032_I2C_ADDR (0xb8 >> 1) + +struct mt9m032_platform_data { + u32 ext_clock; + u32 pix_clock; + bool invert_pixclock; + +}; +#endif /* MT9M032_H */ diff --git a/include/media/i2c/mt9p031.h b/include/media/i2c/mt9p031.h new file mode 100644 index 000000000..7c29c53aa --- /dev/null +++ b/include/media/i2c/mt9p031.h @@ -0,0 +1,17 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef MT9P031_H +#define MT9P031_H + +struct v4l2_subdev; + +/* + * struct mt9p031_platform_data - MT9P031 platform data + * @ext_freq: Input clock frequency + * @target_freq: Pixel clock frequency + */ +struct mt9p031_platform_data { + int ext_freq; + int target_freq; +}; + +#endif diff --git a/include/media/i2c/mt9t001.h b/include/media/i2c/mt9t001.h new file mode 100644 index 000000000..4b1090554 --- /dev/null +++ b/include/media/i2c/mt9t001.h @@ -0,0 +1,10 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef _MEDIA_MT9T001_H +#define _MEDIA_MT9T001_H + +struct mt9t001_platform_data { + unsigned int clk_pol:1; + unsigned int ext_clk; +}; + +#endif diff --git a/include/media/i2c/mt9t112.h b/include/media/i2c/mt9t112.h new file mode 100644 index 000000000..cc80d5cc2 --- /dev/null +++ b/include/media/i2c/mt9t112.h @@ -0,0 +1,27 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* mt9t112 Camera + * + * Copyright (C) 2009 Renesas Solutions Corp. + * Kuninori Morimoto <morimoto.kuninori@renesas.com> + */ + +#ifndef __MT9T112_H__ +#define __MT9T112_H__ + +struct mt9t112_pll_divider { + u8 m, n; + u8 p1, p2, p3, p4, p5, p6, p7; +}; + +/** + * mt9t112_platform_data - mt9t112 driver interface + * @flags: Sensor media bus configuration. + * @divider: Sensor PLL configuration + */ +struct mt9t112_platform_data { +#define MT9T112_FLAG_PCLK_RISING_EDGE BIT(0) + u32 flags; + struct mt9t112_pll_divider divider; +}; + +#endif /* __MT9T112_H__ */ diff --git a/include/media/i2c/mt9v011.h b/include/media/i2c/mt9v011.h new file mode 100644 index 000000000..41c00b3e7 --- /dev/null +++ b/include/media/i2c/mt9v011.h @@ -0,0 +1,14 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* mt9v011 sensor + * + * Copyright (C) 2011 Hans Verkuil <hverkuil@xs4all.nl> + */ + +#ifndef __MT9V011_H__ +#define __MT9V011_H__ + +struct mt9v011_platform_data { + unsigned xtal; /* Hz */ +}; + +#endif diff --git a/include/media/i2c/mt9v022.h b/include/media/i2c/mt9v022.h new file mode 100644 index 000000000..6966eb538 --- /dev/null +++ b/include/media/i2c/mt9v022.h @@ -0,0 +1,13 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * mt9v022 sensor + */ + +#ifndef __MT9V022_H__ +#define __MT9V022_H__ + +struct mt9v022_platform_data { + unsigned short y_skip_top; /* Lines to skip at the top */ +}; + +#endif diff --git a/include/media/i2c/mt9v032.h b/include/media/i2c/mt9v032.h new file mode 100644 index 000000000..83a37ccfb --- /dev/null +++ b/include/media/i2c/mt9v032.h @@ -0,0 +1,12 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef _MEDIA_MT9V032_H +#define _MEDIA_MT9V032_H + +struct mt9v032_platform_data { + unsigned int clk_pol:1; + + const s64 *link_freqs; + s64 link_def_freq; +}; + +#endif diff --git a/include/media/i2c/noon010pc30.h b/include/media/i2c/noon010pc30.h new file mode 100644 index 000000000..a035d2d9a --- /dev/null +++ b/include/media/i2c/noon010pc30.h @@ -0,0 +1,24 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * Driver header for NOON010PC30L camera sensor chip. + * + * Copyright (c) 2010 Samsung Electronics, Co. Ltd + * Contact: Sylwester Nawrocki <s.nawrocki@samsung.com> + */ + +#ifndef NOON010PC30_H +#define NOON010PC30_H + +/** + * @clk_rate: the clock frequency in Hz + * @gpio_nreset: GPIO driving nRESET pin + * @gpio_nstby: GPIO driving nSTBY pin + */ + +struct noon010pc30_platform_data { + unsigned long clk_rate; + int gpio_nreset; + int gpio_nstby; +}; + +#endif /* NOON010PC30_H */ diff --git a/include/media/i2c/ov2659.h b/include/media/i2c/ov2659.h new file mode 100644 index 000000000..4216adc1e --- /dev/null +++ b/include/media/i2c/ov2659.h @@ -0,0 +1,34 @@ +/* + * Omnivision OV2659 CMOS Image Sensor driver + * + * Copyright (C) 2015 Texas Instruments, Inc. + * + * Benoit Parrot <bparrot@ti.com> + * Lad, Prabhakar <prabhakar.csengg@gmail.com> + * + * This program is free software; you may redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ + +#ifndef OV2659_H +#define OV2659_H + +/** + * struct ov2659_platform_data - ov2659 driver platform data + * @link_frequency: target pixel clock frequency + */ +struct ov2659_platform_data { + s64 link_frequency; +}; + +#endif /* OV2659_H */ diff --git a/include/media/i2c/ov7670.h b/include/media/i2c/ov7670.h new file mode 100644 index 000000000..8686fc212 --- /dev/null +++ b/include/media/i2c/ov7670.h @@ -0,0 +1,20 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * A V4L2 driver for OmniVision OV7670 cameras. + * + * Copyright 2010 One Laptop Per Child + */ + +#ifndef __OV7670_H +#define __OV7670_H + +struct ov7670_config { + int min_width; /* Filter out smaller sizes */ + int min_height; /* Filter out smaller sizes */ + int clock_speed; /* External clock speed (MHz) */ + bool use_smbus; /* Use smbus I/O instead of I2C */ + bool pll_bypass; /* Choose whether to bypass the PLL */ + bool pclk_hb_disable; /* Disable toggling pixclk during horizontal blanking */ +}; + +#endif diff --git a/include/media/i2c/ov772x.h b/include/media/i2c/ov772x.h new file mode 100644 index 000000000..a1702d420 --- /dev/null +++ b/include/media/i2c/ov772x.h @@ -0,0 +1,58 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * ov772x Camera + * + * Copyright (C) 2008 Renesas Solutions Corp. + * Kuninori Morimoto <morimoto.kuninori@renesas.com> + */ + +#ifndef __OV772X_H__ +#define __OV772X_H__ + +/* for flags */ +#define OV772X_FLAG_VFLIP (1 << 0) /* Vertical flip image */ +#define OV772X_FLAG_HFLIP (1 << 1) /* Horizontal flip image */ + +/* + * for Edge ctrl + * + * strength also control Auto or Manual Edge Control Mode + * see also OV772X_MANUAL_EDGE_CTRL + */ +struct ov772x_edge_ctrl { + unsigned char strength; + unsigned char threshold; + unsigned char upper; + unsigned char lower; +}; + +#define OV772X_MANUAL_EDGE_CTRL 0x80 /* un-used bit of strength */ +#define OV772X_EDGE_STRENGTH_MASK 0x1F +#define OV772X_EDGE_THRESHOLD_MASK 0x0F +#define OV772X_EDGE_UPPER_MASK 0xFF +#define OV772X_EDGE_LOWER_MASK 0xFF + +#define OV772X_AUTO_EDGECTRL(u, l) \ +{ \ + .upper = (u & OV772X_EDGE_UPPER_MASK), \ + .lower = (l & OV772X_EDGE_LOWER_MASK), \ +} + +#define OV772X_MANUAL_EDGECTRL(s, t) \ +{ \ + .strength = (s & OV772X_EDGE_STRENGTH_MASK) | \ + OV772X_MANUAL_EDGE_CTRL, \ + .threshold = (t & OV772X_EDGE_THRESHOLD_MASK), \ +} + +/** + * ov772x_camera_info - ov772x driver interface structure + * @flags: Sensor configuration flags + * @edgectrl: Sensor edge control + */ +struct ov772x_camera_info { + unsigned long flags; + struct ov772x_edge_ctrl edgectrl; +}; + +#endif /* __OV772X_H__ */ diff --git a/include/media/i2c/ov9650.h b/include/media/i2c/ov9650.h new file mode 100644 index 000000000..3ec7e0695 --- /dev/null +++ b/include/media/i2c/ov9650.h @@ -0,0 +1,24 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * OV9650/OV9652 camera sensors driver + * + * Copyright (C) 2013 Sylwester Nawrocki <sylvester.nawrocki@gmail.com> + */ +#ifndef OV9650_H_ +#define OV9650_H_ + +/** + * struct ov9650_platform_data - ov9650 driver platform data + * @mclk_frequency: the sensor's master clock frequency in Hz + * @gpio_pwdn: number of a GPIO connected to OV965X PWDN pin + * @gpio_reset: number of a GPIO connected to OV965X RESET pin + * + * If any of @gpio_pwdn or @gpio_reset are unused then they should be + * set to a negative value. @mclk_frequency must always be specified. + */ +struct ov9650_platform_data { + unsigned long mclk_frequency; + int gpio_pwdn; + int gpio_reset; +}; +#endif /* OV9650_H_ */ diff --git a/include/media/i2c/rj54n1cb0c.h b/include/media/i2c/rj54n1cb0c.h new file mode 100644 index 000000000..5689c09b9 --- /dev/null +++ b/include/media/i2c/rj54n1cb0c.h @@ -0,0 +1,16 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * RJ54N1CB0C Private data + * + * Copyright (C) 2009, Guennadi Liakhovetski <g.liakhovetski@gmx.de> + */ + +#ifndef __RJ54N1CB0C_H__ +#define __RJ54N1CB0C_H__ + +struct rj54n1_pdata { + unsigned int mclk_freq; + bool ioctl_high; +}; + +#endif diff --git a/include/media/i2c/s5c73m3.h b/include/media/i2c/s5c73m3.h new file mode 100644 index 000000000..ccb9e5448 --- /dev/null +++ b/include/media/i2c/s5c73m3.h @@ -0,0 +1,55 @@ +/* + * Samsung LSI S5C73M3 8M pixel camera driver + * + * Copyright (C) 2012, Samsung Electronics, Co., Ltd. + * Sylwester Nawrocki <s.nawrocki@samsung.com> + * Andrzej Hajda <a.hajda@samsung.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ +#ifndef MEDIA_S5C73M3__ +#define MEDIA_S5C73M3__ + +#include <linux/videodev2.h> +#include <media/v4l2-mediabus.h> + +/** + * struct s5c73m3_gpio - data structure describing a GPIO + * @gpio: GPIO number + * @level: indicates active state of the @gpio + */ +struct s5c73m3_gpio { + int gpio; + int level; +}; + +/** + * struct s5c73m3_platform_data - s5c73m3 driver platform data + * @mclk_frequency: sensor's master clock frequency in Hz + * @gpio_reset: GPIO driving RESET pin + * @gpio_stby: GPIO driving STBY pin + * @nlanes: maximum number of MIPI-CSI lanes used + * @horiz_flip: default horizontal image flip value, non zero to enable + * @vert_flip: default vertical image flip value, non zero to enable + */ + +struct s5c73m3_platform_data { + unsigned long mclk_frequency; + + struct s5c73m3_gpio gpio_reset; + struct s5c73m3_gpio gpio_stby; + + enum v4l2_mbus_type bus_type; + u8 nlanes; + u8 horiz_flip; + u8 vert_flip; +}; + +#endif /* MEDIA_S5C73M3__ */ diff --git a/include/media/i2c/s5k4ecgx.h b/include/media/i2c/s5k4ecgx.h new file mode 100644 index 000000000..fccb7be8e --- /dev/null +++ b/include/media/i2c/s5k4ecgx.h @@ -0,0 +1,33 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * S5K4ECGX image sensor header file + * + * Copyright (C) 2012, Linaro + * Copyright (C) 2012, Samsung Electronics Co., Ltd. + */ + +#ifndef S5K4ECGX_H +#define S5K4ECGX_H + +/** + * struct s5k4ecgx_gpio - data structure describing a GPIO + * @gpio : GPIO number + * @level: indicates active state of the @gpio + */ +struct s5k4ecgx_gpio { + int gpio; + int level; +}; + +/** + * struct ss5k4ecgx_platform_data- s5k4ecgx driver platform data + * @gpio_reset: GPIO driving RESET pin + * @gpio_stby : GPIO driving STBY pin + */ + +struct s5k4ecgx_platform_data { + struct s5k4ecgx_gpio gpio_reset; + struct s5k4ecgx_gpio gpio_stby; +}; + +#endif /* S5K4ECGX_H */ diff --git a/include/media/i2c/s5k6aa.h b/include/media/i2c/s5k6aa.h new file mode 100644 index 000000000..fd78e85e8 --- /dev/null +++ b/include/media/i2c/s5k6aa.h @@ -0,0 +1,47 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * S5K6AAFX camera sensor driver header + * + * Copyright (C) 2011 Samsung Electronics Co., Ltd. + */ + +#ifndef S5K6AA_H +#define S5K6AA_H + +#include <media/v4l2-mediabus.h> + +/** + * struct s5k6aa_gpio - data structure describing a GPIO + * @gpio: GPIO number + * @level: indicates active state of the @gpio + */ +struct s5k6aa_gpio { + int gpio; + int level; +}; + +/** + * struct s5k6aa_platform_data - s5k6aa driver platform data + * @set_power: an additional callback to the board code, called + * after enabling the regulators and before switching + * the sensor off + * @mclk_frequency: sensor's master clock frequency in Hz + * @gpio_reset: GPIO driving RESET pin + * @gpio_stby: GPIO driving STBY pin + * @nlanes: maximum number of MIPI-CSI lanes used + * @horiz_flip: default horizontal image flip value, non zero to enable + * @vert_flip: default vertical image flip value, non zero to enable + */ + +struct s5k6aa_platform_data { + int (*set_power)(int enable); + unsigned long mclk_frequency; + struct s5k6aa_gpio gpio_reset; + struct s5k6aa_gpio gpio_stby; + enum v4l2_mbus_type bus_type; + u8 nlanes; + u8 horiz_flip; + u8 vert_flip; +}; + +#endif /* S5K6AA_H */ diff --git a/include/media/i2c/saa6588.h b/include/media/i2c/saa6588.h new file mode 100644 index 000000000..bbec05a31 --- /dev/null +++ b/include/media/i2c/saa6588.h @@ -0,0 +1,31 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + + Types and defines needed for RDS. This is included by + saa6588.c and every driver (e.g. bttv-driver.c) that wants + to use the saa6588 module. + + (c) 2005 by Hans J. Koch + + +*/ + +#ifndef _SAA6588_H +#define _SAA6588_H + +struct saa6588_command { + unsigned int block_count; + bool nonblocking; + int result; + unsigned char __user *buffer; + struct file *instance; + poll_table *event_list; + __poll_t poll_mask; +}; + +/* These ioctls are internal to the kernel */ +#define SAA6588_CMD_CLOSE _IOW('R', 2, int) +#define SAA6588_CMD_READ _IOR('R', 3, int) +#define SAA6588_CMD_POLL _IOR('R', 4, int) + +#endif diff --git a/include/media/i2c/saa7115.h b/include/media/i2c/saa7115.h new file mode 100644 index 000000000..0cd6080d7 --- /dev/null +++ b/include/media/i2c/saa7115.h @@ -0,0 +1,128 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + saa7115.h - definition for saa7111/3/4/5 inputs and frequency flags + + Copyright (C) 2006 Hans Verkuil (hverkuil@xs4all.nl) + +*/ + +#ifndef _SAA7115_H_ +#define _SAA7115_H_ + +/* s_routing inputs, outputs, and config */ + +/* SAA7111/3/4/5 HW inputs */ +#define SAA7115_COMPOSITE0 0 +#define SAA7115_COMPOSITE1 1 +#define SAA7115_COMPOSITE2 2 +#define SAA7115_COMPOSITE3 3 +#define SAA7115_COMPOSITE4 4 /* not available for the saa7111/3 */ +#define SAA7115_COMPOSITE5 5 /* not available for the saa7111/3 */ +#define SAA7115_SVIDEO0 6 +#define SAA7115_SVIDEO1 7 +#define SAA7115_SVIDEO2 8 +#define SAA7115_SVIDEO3 9 + +/* outputs */ +#define SAA7115_IPORT_ON 1 +#define SAA7115_IPORT_OFF 0 + +/* SAA7111 specific outputs. */ +#define SAA7111_VBI_BYPASS 2 +#define SAA7111_FMT_YUV422 0x00 +#define SAA7111_FMT_RGB 0x40 +#define SAA7111_FMT_CCIR 0x80 +#define SAA7111_FMT_YUV411 0xc0 + +/* config flags */ +/* + * Register 0x85 should set bit 0 to 0 (it's 1 by default). This bit + * controls the IDQ signal polarity which is set to 'inverted' if the bit + * it 1 and to 'default' if it is 0. + */ +#define SAA7115_IDQ_IS_DEFAULT (1 << 0) + +/* s_crystal_freq values and flags */ + +/* SAA7115 v4l2_crystal_freq frequency values */ +#define SAA7115_FREQ_32_11_MHZ 32110000 /* 32.11 MHz crystal, SAA7114/5 only */ +#define SAA7115_FREQ_24_576_MHZ 24576000 /* 24.576 MHz crystal */ + +/* SAA7115 v4l2_crystal_freq audio clock control flags */ +#define SAA7115_FREQ_FL_UCGC (1 << 0) /* SA 3A[7], UCGC, SAA7115 only */ +#define SAA7115_FREQ_FL_CGCDIV (1 << 1) /* SA 3A[6], CGCDIV, SAA7115 only */ +#define SAA7115_FREQ_FL_APLL (1 << 2) /* SA 3A[3], APLL, SAA7114/5 only */ +#define SAA7115_FREQ_FL_DOUBLE_ASCLK (1 << 3) /* SA 39, LRDIV, SAA7114/5 only */ + +/* ===== SAA7113 Config enums ===== */ + +/* Register 0x08 "Horizontal time constant" [Bit 3..4]: + * Should be set to "Fast Locking Mode" according to the datasheet, + * and that is the default setting in the gm7113c_init table. + * saa7113_init sets this value to "VTR Mode". */ +enum saa7113_r08_htc { + SAA7113_HTC_TV_MODE = 0x00, + SAA7113_HTC_VTR_MODE, /* Default for saa7113_init */ + SAA7113_HTC_FAST_LOCKING_MODE = 0x03 /* Default for gm7113c_init */ +}; + +/* Register 0x10 "Output format selection" [Bit 6..7]: + * Defaults to ITU_656 as specified in datasheet. */ +enum saa7113_r10_ofts { + SAA7113_OFTS_ITU_656 = 0x0, /* Default */ + SAA7113_OFTS_VFLAG_BY_VREF, + SAA7113_OFTS_VFLAG_BY_DATA_TYPE +}; + +/* + * Register 0x12 "Output control" [Bit 0..3 Or Bit 4..7]: + * This is used to select what data is output on the RTS0 and RTS1 pins. + * RTS1 [Bit 4..7] Defaults to DOT_IN. (This value can not be set for RTS0) + * RTS0 [Bit 0..3] Defaults to VIPB in gm7113c_init as specified + * in the datasheet, but is set to HREF_HS in the saa7113_init table. + */ +enum saa7113_r12_rts { + SAA7113_RTS_DOT_IN = 0, /* OBS: Only for RTS1 (Default RTS1) */ + SAA7113_RTS_VIPB, /* Default RTS0 For gm7113c_init */ + SAA7113_RTS_GPSW, + SAA7115_RTS_HL, + SAA7113_RTS_VL, + SAA7113_RTS_DL, + SAA7113_RTS_PLIN, + SAA7113_RTS_HREF_HS, /* Default RTS0 For saa7113_init */ + SAA7113_RTS_HS, + SAA7113_RTS_HQ, + SAA7113_RTS_ODD, + SAA7113_RTS_VS, + SAA7113_RTS_V123, + SAA7113_RTS_VGATE, + SAA7113_RTS_VREF, + SAA7113_RTS_FID +}; + +/** + * struct saa7115_platform_data - Allow overriding default initialization + * + * @saa7113_force_gm7113c_init: Force the use of the gm7113c_init table + * instead of saa7113_init table + * (saa7113 only) + * @saa7113_r08_htc: [R_08 - Bit 3..4] + * @saa7113_r10_vrln: [R_10 - Bit 3] + * default: Disabled for gm7113c_init + * Enabled for saa7113c_init + * @saa7113_r10_ofts: [R_10 - Bit 6..7] + * @saa7113_r12_rts0: [R_12 - Bit 0..3] + * @saa7113_r12_rts1: [R_12 - Bit 4..7] + * @saa7113_r13_adlsb: [R_13 - Bit 7] - default: disabled + */ +struct saa7115_platform_data { + bool saa7113_force_gm7113c_init; + enum saa7113_r08_htc *saa7113_r08_htc; + bool *saa7113_r10_vrln; + enum saa7113_r10_ofts *saa7113_r10_ofts; + enum saa7113_r12_rts *saa7113_r12_rts0; + enum saa7113_r12_rts *saa7113_r12_rts1; + bool *saa7113_r13_adlsb; +}; + +#endif diff --git a/include/media/i2c/saa7127.h b/include/media/i2c/saa7127.h new file mode 100644 index 000000000..53ee999e6 --- /dev/null +++ b/include/media/i2c/saa7127.h @@ -0,0 +1,28 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + saa7127.h - definition for saa7126/7/8/9 inputs/outputs + + Copyright (C) 2006 Hans Verkuil (hverkuil@xs4all.nl) + +*/ + +#ifndef _SAA7127_H_ +#define _SAA7127_H_ + +/* Enumeration for the supported input types */ +enum saa7127_input_type { + SAA7127_INPUT_TYPE_NORMAL, + SAA7127_INPUT_TYPE_TEST_IMAGE +}; + +/* Enumeration for the supported output signal types */ +enum saa7127_output_type { + SAA7127_OUTPUT_TYPE_BOTH, + SAA7127_OUTPUT_TYPE_COMPOSITE, + SAA7127_OUTPUT_TYPE_SVIDEO, + SAA7127_OUTPUT_TYPE_RGB, + SAA7127_OUTPUT_TYPE_YUV_C, + SAA7127_OUTPUT_TYPE_YUV_V +}; + +#endif diff --git a/include/media/i2c/sr030pc30.h b/include/media/i2c/sr030pc30.h new file mode 100644 index 000000000..84c602d68 --- /dev/null +++ b/include/media/i2c/sr030pc30.h @@ -0,0 +1,17 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * Driver header for SR030PC30 camera sensor + * + * Copyright (c) 2010 Samsung Electronics, Co. Ltd + * Contact: Sylwester Nawrocki <s.nawrocki@samsung.com> + */ + +#ifndef SR030PC30_H +#define SR030PC30_H + +struct sr030pc30_platform_data { + unsigned long clk_rate; /* master clock frequency in Hz */ + int (*set_power)(struct device *dev, int on); +}; + +#endif /* SR030PC30_H */ diff --git a/include/media/i2c/tc358743.h b/include/media/i2c/tc358743.h new file mode 100644 index 000000000..b343650c2 --- /dev/null +++ b/include/media/i2c/tc358743.h @@ -0,0 +1,117 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * tc358743 - Toshiba HDMI to CSI-2 bridge + * + * Copyright 2015 Cisco Systems, Inc. and/or its affiliates. All rights reserved. + */ + +/* + * References (c = chapter, p = page): + * REF_01 - Toshiba, TC358743XBG (H2C), Functional Specification, Rev 0.60 + * REF_02 - Toshiba, TC358743XBG_HDMI-CSI_Tv11p_nm.xls + */ + +#ifndef _TC358743_ +#define _TC358743_ + +enum tc358743_ddc5v_delays { + DDC5V_DELAY_0_MS, + DDC5V_DELAY_50_MS, + DDC5V_DELAY_100_MS, + DDC5V_DELAY_200_MS, +}; + +enum tc358743_hdmi_detection_delay { + HDMI_MODE_DELAY_0_MS, + HDMI_MODE_DELAY_25_MS, + HDMI_MODE_DELAY_50_MS, + HDMI_MODE_DELAY_100_MS, +}; + +struct tc358743_platform_data { + /* System clock connected to REFCLK (pin H5) */ + u32 refclk_hz; /* 26 MHz, 27 MHz or 42 MHz */ + + /* DDC +5V debounce delay to avoid spurious interrupts when the cable + * is connected. + * Sets DDC5V_MODE in register DDC_CTL. + * Default: DDC5V_DELAY_0_MS + */ + enum tc358743_ddc5v_delays ddc5v_delay; + + bool enable_hdcp; + + /* + * The FIFO size is 512x32, so Toshiba recommend to set the default FIFO + * level to somewhere in the middle (e.g. 300), so it can cover speed + * mismatches in input and output ports. + */ + u16 fifo_level; + + /* Bps pr lane is (refclk_hz / pll_prd) * pll_fbd */ + u16 pll_prd; + u16 pll_fbd; + + /* CSI + * Calculate CSI parameters with REF_02 for the highest resolution your + * CSI interface can handle. The driver will adjust the number of CSI + * lanes in use according to the pixel clock. + * + * The values in brackets are calculated with REF_02 when the number of + * bps pr lane is 823.5 MHz, and can serve as a starting point. + */ + u32 lineinitcnt; /* (0x00001770) */ + u32 lptxtimecnt; /* (0x00000005) */ + u32 tclk_headercnt; /* (0x00001d04) */ + u32 tclk_trailcnt; /* (0x00000000) */ + u32 ths_headercnt; /* (0x00000505) */ + u32 twakeup; /* (0x00004650) */ + u32 tclk_postcnt; /* (0x00000000) */ + u32 ths_trailcnt; /* (0x00000004) */ + u32 hstxvregcnt; /* (0x00000005) */ + + /* DVI->HDMI detection delay to avoid unnecessary switching between DVI + * and HDMI mode. + * Sets HDMI_DET_V in register HDMI_DET. + * Default: HDMI_MODE_DELAY_0_MS + */ + enum tc358743_hdmi_detection_delay hdmi_detection_delay; + + /* Reset PHY automatically when TMDS clock goes from DC to AC. + * Sets PHY_AUTO_RST2 in register PHY_CTL2. + * Default: false + */ + bool hdmi_phy_auto_reset_tmds_detected; + + /* Reset PHY automatically when TMDS clock passes 21 MHz. + * Sets PHY_AUTO_RST3 in register PHY_CTL2. + * Default: false + */ + bool hdmi_phy_auto_reset_tmds_in_range; + + /* Reset PHY automatically when TMDS clock is detected. + * Sets PHY_AUTO_RST4 in register PHY_CTL2. + * Default: false + */ + bool hdmi_phy_auto_reset_tmds_valid; + + /* Reset HDMI PHY automatically when hsync period is out of range. + * Sets H_PI_RST in register HV_RST. + * Default: false + */ + bool hdmi_phy_auto_reset_hsync_out_of_range; + + /* Reset HDMI PHY automatically when vsync period is out of range. + * Sets V_PI_RST in register HV_RST. + * Default: false + */ + bool hdmi_phy_auto_reset_vsync_out_of_range; +}; + +/* custom controls */ +/* Audio sample rate in Hz */ +#define TC358743_CID_AUDIO_SAMPLING_RATE (V4L2_CID_USER_TC358743_BASE + 0) +/* Audio present status */ +#define TC358743_CID_AUDIO_PRESENT (V4L2_CID_USER_TC358743_BASE + 1) + +#endif diff --git a/include/media/i2c/tda1997x.h b/include/media/i2c/tda1997x.h new file mode 100644 index 000000000..c6c2a8ae4 --- /dev/null +++ b/include/media/i2c/tda1997x.h @@ -0,0 +1,42 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * tda1997x - NXP HDMI receiver + * + * Copyright 2017 Tim Harvey <tharvey@gateworks.com> + * + */ + +#ifndef _TDA1997X_ +#define _TDA1997X_ + +/* Platform Data */ +struct tda1997x_platform_data { + enum v4l2_mbus_type vidout_bus_type; + u32 vidout_bus_width; + u8 vidout_port_cfg[9]; + /* pin polarity (1=invert) */ + bool vidout_inv_de; + bool vidout_inv_hs; + bool vidout_inv_vs; + bool vidout_inv_pclk; + /* clock delays (0=-8, 1=-7 ... 15=+7 pixels) */ + u8 vidout_delay_hs; + u8 vidout_delay_vs; + u8 vidout_delay_de; + u8 vidout_delay_pclk; + /* sync selections (controls how sync pins are derived) */ + u8 vidout_sel_hs; + u8 vidout_sel_vs; + u8 vidout_sel_de; + + /* Audio Port Output */ + int audout_format; + u32 audout_mclk_fs; /* clock multiplier */ + u32 audout_width; /* 13 or 32 bit */ + u32 audout_layout; /* layout0=AP0 layout1=AP0,AP1,AP2,AP3 */ + bool audout_layoutauto; /* audio layout dictated by pkt header */ + bool audout_invert_clk; /* data valid on rising edge of BCLK */ + bool audio_auto_mute; /* enable hardware audio auto-mute */ +}; + +#endif diff --git a/include/media/i2c/ths7303.h b/include/media/i2c/ths7303.h new file mode 100644 index 000000000..95492d127 --- /dev/null +++ b/include/media/i2c/ths7303.h @@ -0,0 +1,28 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Copyright (C) 2013 Texas Instruments Inc + * + * Copyright 2013 Cisco Systems, Inc. and/or its affiliates. + * + * Contributors: + * Hans Verkuil <hans.verkuil@cisco.com> + * Lad, Prabhakar <prabhakar.lad@ti.com> + * Martin Bugge <marbugge@cisco.com> + */ + +#ifndef THS7353_H +#define THS7353_H + +/** + * struct ths7303_platform_data - Platform dependent data + * @ch_1: Bias value for channel one. + * @ch_2: Bias value for channel two. + * @ch_3: Bias value for channel three. + */ +struct ths7303_platform_data { + u8 ch_1; + u8 ch_2; + u8 ch_3; +}; + +#endif diff --git a/include/media/i2c/tvaudio.h b/include/media/i2c/tvaudio.h new file mode 100644 index 000000000..42cd3206f --- /dev/null +++ b/include/media/i2c/tvaudio.h @@ -0,0 +1,52 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + tvaudio.h - definition for tvaudio inputs + + Copyright (C) 2006 Hans Verkuil (hverkuil@xs4all.nl) + +*/ + +#ifndef _TVAUDIO_H +#define _TVAUDIO_H + +/* + * i2c bus addresses for the chips supported by tvaudio.c + */ + +#define I2C_ADDR_TDA8425 0x82 +#define I2C_ADDR_TDA9840 0x84 +#define I2C_ADDR_TDA9874 0xb0 /* also used by 9875 */ +#define I2C_ADDR_TDA9875 0xb0 +#define I2C_ADDR_TDA8425 0x82 +#define I2C_ADDR_TDA9840 0x84 /* also used by TA8874Z */ +#define I2C_ADDR_TDA985x_L 0xb4 /* also used by 9873 */ +#define I2C_ADDR_TDA985x_H 0xb6 +#define I2C_ADDR_TDA9874 0xb0 /* also used by 9875 */ +#define I2C_ADDR_TEA6300 0x80 /* also used by 6320 */ +#define I2C_ADDR_TEA6420 0x98 +#define I2C_ADDR_PIC16C54 0x96 /* PV951 */ + +/* The tvaudio module accepts the following inputs: */ +#define TVAUDIO_INPUT_TUNER 0 +#define TVAUDIO_INPUT_RADIO 1 +#define TVAUDIO_INPUT_EXTERN 2 +#define TVAUDIO_INPUT_INTERN 3 + +static inline const unsigned short *tvaudio_addrs(void) +{ + static const unsigned short addrs[] = { + I2C_ADDR_TDA8425 >> 1, + I2C_ADDR_TEA6300 >> 1, + I2C_ADDR_TEA6420 >> 1, + I2C_ADDR_TDA9840 >> 1, + I2C_ADDR_TDA985x_L >> 1, + I2C_ADDR_TDA985x_H >> 1, + I2C_ADDR_TDA9874 >> 1, + I2C_ADDR_PIC16C54 >> 1, + I2C_CLIENT_END + }; + + return addrs; +} + +#endif diff --git a/include/media/i2c/tvp514x.h b/include/media/i2c/tvp514x.h new file mode 100644 index 000000000..0c1bb04bd --- /dev/null +++ b/include/media/i2c/tvp514x.h @@ -0,0 +1,98 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * drivers/media/video/tvp514x.h + * + * Copyright (C) 2008 Texas Instruments Inc + * Author: Vaibhav Hiremath <hvaibhav@ti.com> + * + * Contributors: + * Sivaraj R <sivaraj@ti.com> + * Brijesh R Jadav <brijesh.j@ti.com> + * Hardik Shah <hardik.shah@ti.com> + * Manjunath Hadli <mrh@ti.com> + * Karicheri Muralidharan <m-karicheri2@ti.com> + */ + +#ifndef _TVP514X_H +#define _TVP514X_H + +/* + * Other macros + */ +#define TVP514X_MODULE_NAME "tvp514x" + +#define TVP514X_XCLK_BT656 (27000000) + +/* Number of pixels and number of lines per frame for different standards */ +#define NTSC_NUM_ACTIVE_PIXELS (720) +#define NTSC_NUM_ACTIVE_LINES (480) +#define PAL_NUM_ACTIVE_PIXELS (720) +#define PAL_NUM_ACTIVE_LINES (576) + +/** + * enum tvp514x_input - enum for different decoder input pin + * configuration. + */ +enum tvp514x_input { + /* + * CVBS input selection + */ + INPUT_CVBS_VI1A = 0x0, + INPUT_CVBS_VI1B, + INPUT_CVBS_VI1C, + INPUT_CVBS_VI2A = 0x04, + INPUT_CVBS_VI2B, + INPUT_CVBS_VI2C, + INPUT_CVBS_VI3A = 0x08, + INPUT_CVBS_VI3B, + INPUT_CVBS_VI3C, + INPUT_CVBS_VI4A = 0x0C, + /* + * S-Video input selection + */ + INPUT_SVIDEO_VI2A_VI1A = 0x44, + INPUT_SVIDEO_VI2B_VI1B, + INPUT_SVIDEO_VI2C_VI1C, + INPUT_SVIDEO_VI2A_VI3A = 0x54, + INPUT_SVIDEO_VI2B_VI3B, + INPUT_SVIDEO_VI2C_VI3C, + INPUT_SVIDEO_VI4A_VI1A = 0x4C, + INPUT_SVIDEO_VI4A_VI1B, + INPUT_SVIDEO_VI4A_VI1C, + INPUT_SVIDEO_VI4A_VI3A = 0x5C, + INPUT_SVIDEO_VI4A_VI3B, + INPUT_SVIDEO_VI4A_VI3C, + + /* Need to add entries for + * RGB, YPbPr and SCART. + */ + INPUT_INVALID +}; + +/** + * enum tvp514x_output - enum for output format + * supported. + * + */ +enum tvp514x_output { + OUTPUT_10BIT_422_EMBEDDED_SYNC = 0, + OUTPUT_20BIT_422_SEPERATE_SYNC, + OUTPUT_10BIT_422_SEPERATE_SYNC = 3, + OUTPUT_INVALID +}; + +/** + * struct tvp514x_platform_data - Platform data values and access functions. + * @clk_polarity: Clock polarity of the current interface. + * @hs_polarity: HSYNC Polarity configuration for current interface. + * @vs_polarity: VSYNC Polarity configuration for current interface. + */ +struct tvp514x_platform_data { + /* Interface control params */ + bool clk_polarity; + bool hs_polarity; + bool vs_polarity; +}; + + +#endif /* ifndef _TVP514X_H */ diff --git a/include/media/i2c/tvp7002.h b/include/media/i2c/tvp7002.h new file mode 100644 index 000000000..c31eb0040 --- /dev/null +++ b/include/media/i2c/tvp7002.h @@ -0,0 +1,41 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* Texas Instruments Triple 8-/10-BIT 165-/110-MSPS Video and Graphics + * Digitizer with Horizontal PLL registers + * + * Copyright (C) 2009 Texas Instruments Inc + * Author: Santiago Nunez-Corrales <santiago.nunez@ridgerun.com> + * + * This code is partially based upon the TVP5150 driver + * written by Mauro Carvalho Chehab <mchehab@kernel.org>, + * the TVP514x driver written by Vaibhav Hiremath <hvaibhav@ti.com> + * and the TVP7002 driver in the TI LSP 2.10.00.14 + */ +#ifndef _TVP7002_H_ +#define _TVP7002_H_ + +#define TVP7002_MODULE_NAME "tvp7002" + +/** + * struct tvp7002_config - Platform dependent data + *@clk_polarity: Clock polarity + * 0 - Data clocked out on rising edge of DATACLK signal + * 1 - Data clocked out on falling edge of DATACLK signal + *@hs_polarity: HSYNC polarity + * 0 - Active low HSYNC output, 1 - Active high HSYNC output + *@vs_polarity: VSYNC Polarity + * 0 - Active low VSYNC output, 1 - Active high VSYNC output + *@fid_polarity: Active-high Field ID polarity. + * 0 - The field ID output is set to logic 1 for an odd field + * (field 1) and set to logic 0 for an even field (field 0). + * 1 - Operation with polarity inverted. + *@sog_polarity: Active high Sync on Green output polarity. + * 0 - Normal operation, 1 - Operation with polarity inverted + */ +struct tvp7002_config { + bool clk_polarity; + bool hs_polarity; + bool vs_polarity; + bool fid_polarity; + bool sog_polarity; +}; +#endif diff --git a/include/media/i2c/tw9910.h b/include/media/i2c/tw9910.h new file mode 100644 index 000000000..92d31bd1a --- /dev/null +++ b/include/media/i2c/tw9910.h @@ -0,0 +1,42 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * tw9910 Driver header + * + * Copyright (C) 2008 Renesas Solutions Corp. + * Kuninori Morimoto <morimoto.kuninori@renesas.com> + * + * Based on ov772x.h + * + * Copyright (C) Kuninori Morimoto <morimoto.kuninori@renesas.com> + */ + +#ifndef __TW9910_H__ +#define __TW9910_H__ + +/** + * tw9910_mpout_pin - MPOUT (multi-purpose output) pin functions + */ +enum tw9910_mpout_pin { + TW9910_MPO_VLOSS, + TW9910_MPO_HLOCK, + TW9910_MPO_SLOCK, + TW9910_MPO_VLOCK, + TW9910_MPO_MONO, + TW9910_MPO_DET50, + TW9910_MPO_FIELD, + TW9910_MPO_RTCO, +}; + +/** + * tw9910_video_info - tw9910 driver interface structure + * @buswidth: Parallel data bus width (8 or 16). + * @mpout: Selected function of MPOUT (multi-purpose output) pin. + * See &enum tw9910_mpout_pin + */ +struct tw9910_video_info { + unsigned long buswidth; + enum tw9910_mpout_pin mpout; +}; + + +#endif /* __TW9910_H__ */ diff --git a/include/media/i2c/uda1342.h b/include/media/i2c/uda1342.h new file mode 100644 index 000000000..cb412d4c1 --- /dev/null +++ b/include/media/i2c/uda1342.h @@ -0,0 +1,16 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * uda1342.h - definition for uda1342 inputs + * + * Copyright 2013 Cisco Systems, Inc. and/or its affiliates. All rights reserved. + */ + +#ifndef _UDA1342_H_ +#define _UDA1342_H_ + +/* The UDA1342 has 2 inputs */ + +#define UDA1342_IN1 1 +#define UDA1342_IN2 2 + +#endif diff --git a/include/media/i2c/upd64031a.h b/include/media/i2c/upd64031a.h new file mode 100644 index 000000000..b6570abc8 --- /dev/null +++ b/include/media/i2c/upd64031a.h @@ -0,0 +1,27 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * upd64031a - NEC Electronics Ghost Reduction input defines + * + * 2006 by Hans Verkuil (hverkuil@xs4all.nl) + */ + +#ifndef _UPD64031A_H_ +#define _UPD64031A_H_ + +/* Ghost reduction modes */ +#define UPD64031A_GR_ON 0 +#define UPD64031A_GR_OFF 1 +#define UPD64031A_GR_THROUGH 3 + +/* Direct 3D/YCS Connection */ +#define UPD64031A_3DYCS_DISABLE (0 << 2) +#define UPD64031A_3DYCS_COMPOSITE (2 << 2) +#define UPD64031A_3DYCS_SVIDEO (3 << 2) + +/* Composite sync digital separation circuit */ +#define UPD64031A_COMPOSITE_EXTERNAL (1 << 4) + +/* Vertical sync digital separation circuit */ +#define UPD64031A_VERTICAL_EXTERNAL (1 << 5) + +#endif diff --git a/include/media/i2c/upd64083.h b/include/media/i2c/upd64083.h new file mode 100644 index 000000000..17fb7b520 --- /dev/null +++ b/include/media/i2c/upd64083.h @@ -0,0 +1,45 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * upd6408x - NEC Electronics 3-Dimensional Y/C separation input defines + * + * 2006 by Hans Verkuil (hverkuil@xs4all.nl) + */ + +#ifndef _UPD64083_H_ +#define _UPD64083_H_ + +/* There are two bits of information that the driver needs in order + to select the correct routing: the operating mode and the selection + of the Y input (external or internal). + + The first two operating modes expect a composite signal on the Y input, + the second two operating modes use both the Y and C inputs. + + Normally YCS_MODE is used for tuner and composite inputs, and the + YCNR mode is used for S-Video inputs. + + The external Y-ADC is selected when the composite input comes from a + upd64031a ghost reduction device. If this device is not present, or + the input is a S-Video signal, then the internal Y-ADC input should + be used. */ + +/* Operating modes: */ + +/* YCS mode: Y/C separation (burst locked clocking) */ +#define UPD64083_YCS_MODE 0 +/* YCS+ mode: 2D Y/C separation and YCNR (burst locked clocking) */ +#define UPD64083_YCS_PLUS_MODE 1 + +/* Note: the following two modes cannot be used in combination with the + external Y-ADC. */ +/* MNNR mode: frame comb type YNR+C delay (line locked clocking) */ +#define UPD64083_MNNR_MODE 2 +/* YCNR mode: frame recursive YCNR (burst locked clocking) */ +#define UPD64083_YCNR_MODE 3 + +/* Select external Y-ADC: this should be set if this device is used in + combination with the upd64031a ghost reduction device. + Otherwise leave at 0 (use internal Y-ADC). */ +#define UPD64083_EXT_Y_ADC (1 << 2) + +#endif diff --git a/include/media/i2c/wm8775.h b/include/media/i2c/wm8775.h new file mode 100644 index 000000000..836758176 --- /dev/null +++ b/include/media/i2c/wm8775.h @@ -0,0 +1,32 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + wm8775.h - definition for wm8775 inputs and outputs + + Copyright (C) 2006 Hans Verkuil (hverkuil@xs4all.nl) + +*/ + +#ifndef _WM8775_H_ +#define _WM8775_H_ + +/* The WM8775 has 4 inputs and one output. Zero or more inputs + are multiplexed together to the output. Hence there are + 16 combinations. + If only one input is active (the normal case) then the + input values 1, 2, 4 or 8 should be used. */ + +#define WM8775_AIN1 1 +#define WM8775_AIN2 2 +#define WM8775_AIN3 4 +#define WM8775_AIN4 8 + + +struct wm8775_platform_data { + /* + * FIXME: Instead, we should parametrize the params + * that need different settings between ivtv, pvrusb2, and Nova-S + */ + bool is_nova_s; +}; + +#endif diff --git a/include/media/imx.h b/include/media/imx.h new file mode 100644 index 000000000..5f14acdd7 --- /dev/null +++ b/include/media/imx.h @@ -0,0 +1,11 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * Copyright (c) 2014-2017 Mentor Graphics Inc. + */ + +#ifndef __MEDIA_IMX_H__ +#define __MEDIA_IMX_H__ + +#include <linux/imx-media.h> + +#endif diff --git a/include/media/media-dev-allocator.h b/include/media/media-dev-allocator.h new file mode 100644 index 000000000..2ab54d426 --- /dev/null +++ b/include/media/media-dev-allocator.h @@ -0,0 +1,63 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * media-dev-allocator.h - Media Controller Device Allocator API + * + * Copyright (c) 2019 Shuah Khan <shuah@kernel.org> + * + * Credits: Suggested by Laurent Pinchart <laurent.pinchart@ideasonboard.com> + */ + +/* + * This file adds a global ref-counted Media Controller Device Instance API. + * A system wide global media device list is managed and each media device + * includes a kref count. The last put on the media device releases the media + * device instance. + */ + +#ifndef _MEDIA_DEV_ALLOCATOR_H +#define _MEDIA_DEV_ALLOCATOR_H + +struct usb_device; + +#if defined(CONFIG_MEDIA_CONTROLLER) && IS_ENABLED(CONFIG_USB) +/** + * media_device_usb_allocate() - Allocate and return struct &media device + * + * @udev: struct &usb_device pointer + * @module_name: should be filled with %KBUILD_MODNAME + * @owner: struct module pointer %THIS_MODULE for the driver. + * %THIS_MODULE is null for a built-in driver. + * It is safe even when %THIS_MODULE is null. + * + * This interface should be called to allocate a Media Device when multiple + * drivers share usb_device and the media device. This interface allocates + * &media_device structure and calls media_device_usb_init() to initialize + * it. + * + */ +struct media_device *media_device_usb_allocate(struct usb_device *udev, + const char *module_name, + struct module *owner); +/** + * media_device_delete() - Release media device. Calls kref_put(). + * + * @mdev: struct &media_device pointer + * @module_name: should be filled with %KBUILD_MODNAME + * @owner: struct module pointer %THIS_MODULE for the driver. + * %THIS_MODULE is null for a built-in driver. + * It is safe even when %THIS_MODULE is null. + * + * This interface should be called to put Media Device Instance kref. + */ +void media_device_delete(struct media_device *mdev, const char *module_name, + struct module *owner); +#else +static inline struct media_device *media_device_usb_allocate( + struct usb_device *udev, const char *module_name, + struct module *owner) + { return NULL; } +static inline void media_device_delete( + struct media_device *mdev, const char *module_name, + struct module *owner) { } +#endif /* CONFIG_MEDIA_CONTROLLER && CONFIG_USB */ +#endif /* _MEDIA_DEV_ALLOCATOR_H */ diff --git a/include/media/media-device.h b/include/media/media-device.h new file mode 100644 index 000000000..1345e6da6 --- /dev/null +++ b/include/media/media-device.h @@ -0,0 +1,499 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Media device + * + * Copyright (C) 2010 Nokia Corporation + * + * Contacts: Laurent Pinchart <laurent.pinchart@ideasonboard.com> + * Sakari Ailus <sakari.ailus@iki.fi> + */ + +#ifndef _MEDIA_DEVICE_H +#define _MEDIA_DEVICE_H + +#include <linux/list.h> +#include <linux/mutex.h> + +#include <media/media-devnode.h> +#include <media/media-entity.h> + +struct ida; +struct device; +struct media_device; + +/** + * struct media_entity_notify - Media Entity Notify + * + * @list: List head + * @notify_data: Input data to invoke the callback + * @notify: Callback function pointer + * + * Drivers may register a callback to take action when new entities get + * registered with the media device. This handler is intended for creating + * links between existing entities and should not create entities and register + * them. + */ +struct media_entity_notify { + struct list_head list; + void *notify_data; + void (*notify)(struct media_entity *entity, void *notify_data); +}; + +/** + * struct media_device_ops - Media device operations + * @link_notify: Link state change notification callback. This callback is + * called with the graph_mutex held. + * @req_alloc: Allocate a request. Set this if you need to allocate a struct + * larger then struct media_request. @req_alloc and @req_free must + * either both be set or both be NULL. + * @req_free: Free a request. Set this if @req_alloc was set as well, leave + * to NULL otherwise. + * @req_validate: Validate a request, but do not queue yet. The req_queue_mutex + * lock is held when this op is called. + * @req_queue: Queue a validated request, cannot fail. If something goes + * wrong when queueing this request then it should be marked + * as such internally in the driver and any related buffers + * must eventually return to vb2 with state VB2_BUF_STATE_ERROR. + * The req_queue_mutex lock is held when this op is called. + * It is important that vb2 buffer objects are queued last after + * all other object types are queued: queueing a buffer kickstarts + * the request processing, so all other objects related to the + * request (and thus the buffer) must be available to the driver. + * And once a buffer is queued, then the driver can complete + * or delete objects from the request before req_queue exits. + */ +struct media_device_ops { + int (*link_notify)(struct media_link *link, u32 flags, + unsigned int notification); + struct media_request *(*req_alloc)(struct media_device *mdev); + void (*req_free)(struct media_request *req); + int (*req_validate)(struct media_request *req); + void (*req_queue)(struct media_request *req); +}; + +/** + * struct media_device - Media device + * @dev: Parent device + * @devnode: Media device node + * @driver_name: Optional device driver name. If not set, calls to + * %MEDIA_IOC_DEVICE_INFO will return ``dev->driver->name``. + * This is needed for USB drivers for example, as otherwise + * they'll all appear as if the driver name was "usb". + * @model: Device model name + * @serial: Device serial number (optional) + * @bus_info: Unique and stable device location identifier + * @hw_revision: Hardware device revision + * @topology_version: Monotonic counter for storing the version of the graph + * topology. Should be incremented each time the topology changes. + * @id: Unique ID used on the last registered graph object + * @entity_internal_idx: Unique internal entity ID used by the graph traversal + * algorithms + * @entity_internal_idx_max: Allocated internal entity indices + * @entities: List of registered entities + * @interfaces: List of registered interfaces + * @pads: List of registered pads + * @links: List of registered links + * @entity_notify: List of registered entity_notify callbacks + * @graph_mutex: Protects access to struct media_device data + * @pm_count_walk: Graph walk for power state walk. Access serialised using + * graph_mutex. + * + * @source_priv: Driver Private data for enable/disable source handlers + * @enable_source: Enable Source Handler function pointer + * @disable_source: Disable Source Handler function pointer + * + * @ops: Operation handler callbacks + * @req_queue_mutex: Serialise the MEDIA_REQUEST_IOC_QUEUE ioctl w.r.t. + * other operations that stop or start streaming. + * @request_id: Used to generate unique request IDs + * + * This structure represents an abstract high-level media device. It allows easy + * access to entities and provides basic media device-level support. The + * structure can be allocated directly or embedded in a larger structure. + * + * The parent @dev is a physical device. It must be set before registering the + * media device. + * + * @model is a descriptive model name exported through sysfs. It doesn't have to + * be unique. + * + * @enable_source is a handler to find source entity for the + * sink entity and activate the link between them if source + * entity is free. Drivers should call this handler before + * accessing the source. + * + * @disable_source is a handler to find source entity for the + * sink entity and deactivate the link between them. Drivers + * should call this handler to release the source. + * + * Use-case: find tuner entity connected to the decoder + * entity and check if it is available, and activate the + * link between them from @enable_source and deactivate + * from @disable_source. + * + * .. note:: + * + * Bridge driver is expected to implement and set the + * handler when &media_device is registered or when + * bridge driver finds the media_device during probe. + * Bridge driver sets source_priv with information + * necessary to run @enable_source and @disable_source handlers. + * Callers should hold graph_mutex to access and call @enable_source + * and @disable_source handlers. + */ +struct media_device { + /* dev->driver_data points to this struct. */ + struct device *dev; + struct media_devnode *devnode; + + char model[32]; + char driver_name[32]; + char serial[40]; + char bus_info[32]; + u32 hw_revision; + + u64 topology_version; + + u32 id; + struct ida entity_internal_idx; + int entity_internal_idx_max; + + struct list_head entities; + struct list_head interfaces; + struct list_head pads; + struct list_head links; + + /* notify callback list invoked when a new entity is registered */ + struct list_head entity_notify; + + /* Serializes graph operations. */ + struct mutex graph_mutex; + struct media_graph pm_count_walk; + + void *source_priv; + int (*enable_source)(struct media_entity *entity, + struct media_pipeline *pipe); + void (*disable_source)(struct media_entity *entity); + + const struct media_device_ops *ops; + + struct mutex req_queue_mutex; + atomic_t request_id; +}; + +/* We don't need to include pci.h or usb.h here */ +struct pci_dev; +struct usb_device; + +#ifdef CONFIG_MEDIA_CONTROLLER + +/* Supported link_notify @notification values. */ +#define MEDIA_DEV_NOTIFY_PRE_LINK_CH 0 +#define MEDIA_DEV_NOTIFY_POST_LINK_CH 1 + +/** + * media_entity_enum_init - Initialise an entity enumeration + * + * @ent_enum: Entity enumeration to be initialised + * @mdev: The related media device + * + * Return: zero on success or a negative error code. + */ +static inline __must_check int media_entity_enum_init( + struct media_entity_enum *ent_enum, struct media_device *mdev) +{ + return __media_entity_enum_init(ent_enum, + mdev->entity_internal_idx_max + 1); +} + +/** + * media_device_init() - Initializes a media device element + * + * @mdev: pointer to struct &media_device + * + * This function initializes the media device prior to its registration. + * The media device initialization and registration is split in two functions + * to avoid race conditions and make the media device available to user-space + * before the media graph has been completed. + * + * So drivers need to first initialize the media device, register any entity + * within the media device, create pad to pad links and then finally register + * the media device by calling media_device_register() as a final step. + */ +void media_device_init(struct media_device *mdev); + +/** + * media_device_cleanup() - Cleanups a media device element + * + * @mdev: pointer to struct &media_device + * + * This function that will destroy the graph_mutex that is + * initialized in media_device_init(). + */ +void media_device_cleanup(struct media_device *mdev); + +/** + * __media_device_register() - Registers a media device element + * + * @mdev: pointer to struct &media_device + * @owner: should be filled with %THIS_MODULE + * + * Users, should, instead, call the media_device_register() macro. + * + * The caller is responsible for initializing the &media_device structure + * before registration. The following fields of &media_device must be set: + * + * - &media_entity.dev must point to the parent device (usually a &pci_dev, + * &usb_interface or &platform_device instance). + * + * - &media_entity.model must be filled with the device model name as a + * NUL-terminated UTF-8 string. The device/model revision must not be + * stored in this field. + * + * The following fields are optional: + * + * - &media_entity.serial is a unique serial number stored as a + * NUL-terminated ASCII string. The field is big enough to store a GUID + * in text form. If the hardware doesn't provide a unique serial number + * this field must be left empty. + * + * - &media_entity.bus_info represents the location of the device in the + * system as a NUL-terminated ASCII string. For PCI/PCIe devices + * &media_entity.bus_info must be set to "PCI:" (or "PCIe:") followed by + * the value of pci_name(). For USB devices,the usb_make_path() function + * must be used. This field is used by applications to distinguish between + * otherwise identical devices that don't provide a serial number. + * + * - &media_entity.hw_revision is the hardware device revision in a + * driver-specific format. When possible the revision should be formatted + * with the KERNEL_VERSION() macro. + * + * .. note:: + * + * #) Upon successful registration a character device named media[0-9]+ is created. The device major and minor numbers are dynamic. The model name is exported as a sysfs attribute. + * + * #) Unregistering a media device that hasn't been registered is **NOT** safe. + * + * Return: returns zero on success or a negative error code. + */ +int __must_check __media_device_register(struct media_device *mdev, + struct module *owner); + + +/** + * media_device_register() - Registers a media device element + * + * @mdev: pointer to struct &media_device + * + * This macro calls __media_device_register() passing %THIS_MODULE as + * the __media_device_register() second argument (**owner**). + */ +#define media_device_register(mdev) __media_device_register(mdev, THIS_MODULE) + +/** + * media_device_unregister() - Unregisters a media device element + * + * @mdev: pointer to struct &media_device + * + * It is safe to call this function on an unregistered (but initialised) + * media device. + */ +void media_device_unregister(struct media_device *mdev); + +/** + * media_device_register_entity() - registers a media entity inside a + * previously registered media device. + * + * @mdev: pointer to struct &media_device + * @entity: pointer to struct &media_entity to be registered + * + * Entities are identified by a unique positive integer ID. The media + * controller framework will such ID automatically. IDs are not guaranteed + * to be contiguous, and the ID number can change on newer Kernel versions. + * So, neither the driver nor userspace should hardcode ID numbers to refer + * to the entities, but, instead, use the framework to find the ID, when + * needed. + * + * The media_entity name, type and flags fields should be initialized before + * calling media_device_register_entity(). Entities embedded in higher-level + * standard structures can have some of those fields set by the higher-level + * framework. + * + * If the device has pads, media_entity_pads_init() should be called before + * this function. Otherwise, the &media_entity.pad and &media_entity.num_pads + * should be zeroed before calling this function. + * + * Entities have flags that describe the entity capabilities and state: + * + * %MEDIA_ENT_FL_DEFAULT + * indicates the default entity for a given type. + * This can be used to report the default audio and video devices or the + * default camera sensor. + * + * .. note:: + * + * Drivers should set the entity function before calling this function. + * Please notice that the values %MEDIA_ENT_F_V4L2_SUBDEV_UNKNOWN and + * %MEDIA_ENT_F_UNKNOWN should not be used by the drivers. + */ +int __must_check media_device_register_entity(struct media_device *mdev, + struct media_entity *entity); + +/** + * media_device_unregister_entity() - unregisters a media entity. + * + * @entity: pointer to struct &media_entity to be unregistered + * + * All links associated with the entity and all PADs are automatically + * unregistered from the media_device when this function is called. + * + * Unregistering an entity will not change the IDs of the other entities and + * the previoully used ID will never be reused for a newly registered entities. + * + * When a media device is unregistered, all its entities are unregistered + * automatically. No manual entities unregistration is then required. + * + * .. note:: + * + * The media_entity instance itself must be freed explicitly by + * the driver if required. + */ +void media_device_unregister_entity(struct media_entity *entity); + +/** + * media_device_register_entity_notify() - Registers a media entity_notify + * callback + * + * @mdev: The media device + * @nptr: The media_entity_notify + * + * .. note:: + * + * When a new entity is registered, all the registered + * media_entity_notify callbacks are invoked. + */ + +int __must_check media_device_register_entity_notify(struct media_device *mdev, + struct media_entity_notify *nptr); + +/** + * media_device_unregister_entity_notify() - Unregister a media entity notify + * callback + * + * @mdev: The media device + * @nptr: The media_entity_notify + * + */ +void media_device_unregister_entity_notify(struct media_device *mdev, + struct media_entity_notify *nptr); + +/* Iterate over all entities. */ +#define media_device_for_each_entity(entity, mdev) \ + list_for_each_entry(entity, &(mdev)->entities, graph_obj.list) + +/* Iterate over all interfaces. */ +#define media_device_for_each_intf(intf, mdev) \ + list_for_each_entry(intf, &(mdev)->interfaces, graph_obj.list) + +/* Iterate over all pads. */ +#define media_device_for_each_pad(pad, mdev) \ + list_for_each_entry(pad, &(mdev)->pads, graph_obj.list) + +/* Iterate over all links. */ +#define media_device_for_each_link(link, mdev) \ + list_for_each_entry(link, &(mdev)->links, graph_obj.list) + +/** + * media_device_pci_init() - create and initialize a + * struct &media_device from a PCI device. + * + * @mdev: pointer to struct &media_device + * @pci_dev: pointer to struct pci_dev + * @name: media device name. If %NULL, the routine will use the default + * name for the pci device, given by pci_name() macro. + */ +void media_device_pci_init(struct media_device *mdev, + struct pci_dev *pci_dev, + const char *name); +/** + * __media_device_usb_init() - create and initialize a + * struct &media_device from a PCI device. + * + * @mdev: pointer to struct &media_device + * @udev: pointer to struct usb_device + * @board_name: media device name. If %NULL, the routine will use the usb + * product name, if available. + * @driver_name: name of the driver. if %NULL, the routine will use the name + * given by ``udev->dev->driver->name``, with is usually the wrong + * thing to do. + * + * .. note:: + * + * It is better to call media_device_usb_init() instead, as + * such macro fills driver_name with %KBUILD_MODNAME. + */ +void __media_device_usb_init(struct media_device *mdev, + struct usb_device *udev, + const char *board_name, + const char *driver_name); + +#else +static inline int media_device_register(struct media_device *mdev) +{ + return 0; +} +static inline void media_device_unregister(struct media_device *mdev) +{ +} +static inline int media_device_register_entity(struct media_device *mdev, + struct media_entity *entity) +{ + return 0; +} +static inline void media_device_unregister_entity(struct media_entity *entity) +{ +} +static inline int media_device_register_entity_notify( + struct media_device *mdev, + struct media_entity_notify *nptr) +{ + return 0; +} +static inline void media_device_unregister_entity_notify( + struct media_device *mdev, + struct media_entity_notify *nptr) +{ +} + +static inline void media_device_pci_init(struct media_device *mdev, + struct pci_dev *pci_dev, + char *name) +{ +} + +static inline void __media_device_usb_init(struct media_device *mdev, + struct usb_device *udev, + char *board_name, + char *driver_name) +{ +} + +#endif /* CONFIG_MEDIA_CONTROLLER */ + +/** + * media_device_usb_init() - create and initialize a + * struct &media_device from a PCI device. + * + * @mdev: pointer to struct &media_device + * @udev: pointer to struct usb_device + * @name: media device name. If %NULL, the routine will use the usb + * product name, if available. + * + * This macro calls media_device_usb_init() passing the + * media_device_usb_init() **driver_name** parameter filled with + * %KBUILD_MODNAME. + */ +#define media_device_usb_init(mdev, udev, name) \ + __media_device_usb_init(mdev, udev, name, KBUILD_MODNAME) + +#endif diff --git a/include/media/media-devnode.h b/include/media/media-devnode.h new file mode 100644 index 000000000..d27c1c646 --- /dev/null +++ b/include/media/media-devnode.h @@ -0,0 +1,168 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Media device node + * + * Copyright (C) 2010 Nokia Corporation + * + * Contacts: Laurent Pinchart <laurent.pinchart@ideasonboard.com> + * Sakari Ailus <sakari.ailus@iki.fi> + * + * -- + * + * Common functions for media-related drivers to register and unregister media + * device nodes. + */ + +#ifndef _MEDIA_DEVNODE_H +#define _MEDIA_DEVNODE_H + +#include <linux/poll.h> +#include <linux/fs.h> +#include <linux/device.h> +#include <linux/cdev.h> + +struct media_device; + +/* + * Flag to mark the media_devnode struct as registered. Drivers must not touch + * this flag directly, it will be set and cleared by media_devnode_register and + * media_devnode_unregister. + */ +#define MEDIA_FLAG_REGISTERED 0 + +/** + * struct media_file_operations - Media device file operations + * + * @owner: should be filled with %THIS_MODULE + * @read: pointer to the function that implements read() syscall + * @write: pointer to the function that implements write() syscall + * @poll: pointer to the function that implements poll() syscall + * @ioctl: pointer to the function that implements ioctl() syscall + * @compat_ioctl: pointer to the function that will handle 32 bits userspace + * calls to the ioctl() syscall on a Kernel compiled with 64 bits. + * @open: pointer to the function that implements open() syscall + * @release: pointer to the function that will release the resources allocated + * by the @open function. + */ +struct media_file_operations { + struct module *owner; + ssize_t (*read) (struct file *, char __user *, size_t, loff_t *); + ssize_t (*write) (struct file *, const char __user *, size_t, loff_t *); + __poll_t (*poll) (struct file *, struct poll_table_struct *); + long (*ioctl) (struct file *, unsigned int, unsigned long); + long (*compat_ioctl) (struct file *, unsigned int, unsigned long); + int (*open) (struct file *); + int (*release) (struct file *); +}; + +/** + * struct media_devnode - Media device node + * @media_dev: pointer to struct &media_device + * @fops: pointer to struct &media_file_operations with media device ops + * @dev: pointer to struct &device containing the media controller device + * @cdev: struct cdev pointer character device + * @parent: parent device + * @minor: device node minor number + * @flags: flags, combination of the ``MEDIA_FLAG_*`` constants + * @release: release callback called at the end of ``media_devnode_release()`` + * routine at media-device.c. + * + * This structure represents a media-related device node. + * + * The @parent is a physical device. It must be set by core or device drivers + * before registering the node. + */ +struct media_devnode { + struct media_device *media_dev; + + /* device ops */ + const struct media_file_operations *fops; + + /* sysfs */ + struct device dev; /* media device */ + struct cdev cdev; /* character device */ + struct device *parent; /* device parent */ + + /* device info */ + int minor; + unsigned long flags; /* Use bitops to access flags */ + + /* callbacks */ + void (*release)(struct media_devnode *devnode); +}; + +/* dev to media_devnode */ +#define to_media_devnode(cd) container_of(cd, struct media_devnode, dev) + +/** + * media_devnode_register - register a media device node + * + * @mdev: struct media_device we want to register a device node + * @devnode: media device node structure we want to register + * @owner: should be filled with %THIS_MODULE + * + * The registration code assigns minor numbers and registers the new device node + * with the kernel. An error is returned if no free minor number can be found, + * or if the registration of the device node fails. + * + * Zero is returned on success. + * + * Note that if the media_devnode_register call fails, the release() callback of + * the media_devnode structure is *not* called, so the caller is responsible for + * freeing any data. + */ +int __must_check media_devnode_register(struct media_device *mdev, + struct media_devnode *devnode, + struct module *owner); + +/** + * media_devnode_unregister_prepare - clear the media device node register bit + * @devnode: the device node to prepare for unregister + * + * This clears the passed device register bit. Future open calls will be met + * with errors. Should be called before media_devnode_unregister() to avoid + * races with unregister and device file open calls. + * + * This function can safely be called if the device node has never been + * registered or has already been unregistered. + */ +void media_devnode_unregister_prepare(struct media_devnode *devnode); + +/** + * media_devnode_unregister - unregister a media device node + * @devnode: the device node to unregister + * + * This unregisters the passed device. Future open calls will be met with + * errors. + * + * Should be called after media_devnode_unregister_prepare() + */ +void media_devnode_unregister(struct media_devnode *devnode); + +/** + * media_devnode_data - returns a pointer to the &media_devnode + * + * @filp: pointer to struct &file + */ +static inline struct media_devnode *media_devnode_data(struct file *filp) +{ + return filp->private_data; +} + +/** + * media_devnode_is_registered - returns true if &media_devnode is registered; + * false otherwise. + * + * @devnode: pointer to struct &media_devnode. + * + * Note: If mdev is NULL, it also returns false. + */ +static inline int media_devnode_is_registered(struct media_devnode *devnode) +{ + if (!devnode) + return false; + + return test_bit(MEDIA_FLAG_REGISTERED, &devnode->flags); +} + +#endif /* _MEDIA_DEVNODE_H */ diff --git a/include/media/media-entity.h b/include/media/media-entity.h new file mode 100644 index 000000000..cbdfcb79d --- /dev/null +++ b/include/media/media-entity.h @@ -0,0 +1,1105 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Media entity + * + * Copyright (C) 2010 Nokia Corporation + * + * Contacts: Laurent Pinchart <laurent.pinchart@ideasonboard.com> + * Sakari Ailus <sakari.ailus@iki.fi> + */ + +#ifndef _MEDIA_ENTITY_H +#define _MEDIA_ENTITY_H + +#include <linux/bitmap.h> +#include <linux/bug.h> +#include <linux/fwnode.h> +#include <linux/kernel.h> +#include <linux/list.h> +#include <linux/media.h> + +/* Enums used internally at the media controller to represent graphs */ + +/** + * enum media_gobj_type - type of a graph object + * + * @MEDIA_GRAPH_ENTITY: Identify a media entity + * @MEDIA_GRAPH_PAD: Identify a media pad + * @MEDIA_GRAPH_LINK: Identify a media link + * @MEDIA_GRAPH_INTF_DEVNODE: Identify a media Kernel API interface via + * a device node + */ +enum media_gobj_type { + MEDIA_GRAPH_ENTITY, + MEDIA_GRAPH_PAD, + MEDIA_GRAPH_LINK, + MEDIA_GRAPH_INTF_DEVNODE, +}; + +#define MEDIA_BITS_PER_TYPE 8 +#define MEDIA_BITS_PER_ID (32 - MEDIA_BITS_PER_TYPE) +#define MEDIA_ID_MASK GENMASK_ULL(MEDIA_BITS_PER_ID - 1, 0) + +/* Structs to represent the objects that belong to a media graph */ + +/** + * struct media_gobj - Define a graph object. + * + * @mdev: Pointer to the struct &media_device that owns the object + * @id: Non-zero object ID identifier. The ID should be unique + * inside a media_device, as it is composed by + * %MEDIA_BITS_PER_TYPE to store the type plus + * %MEDIA_BITS_PER_ID to store the ID + * @list: List entry stored in one of the per-type mdev object lists + * + * All objects on the media graph should have this struct embedded + */ +struct media_gobj { + struct media_device *mdev; + u32 id; + struct list_head list; +}; + +#define MEDIA_ENTITY_ENUM_MAX_DEPTH 16 + +/** + * struct media_entity_enum - An enumeration of media entities. + * + * @bmap: Bit map in which each bit represents one entity at struct + * media_entity->internal_idx. + * @idx_max: Number of bits in bmap + */ +struct media_entity_enum { + unsigned long *bmap; + int idx_max; +}; + +/** + * struct media_graph - Media graph traversal state + * + * @stack: Graph traversal stack; the stack contains information + * on the path the media entities to be walked and the + * links through which they were reached. + * @stack.entity: pointer to &struct media_entity at the graph. + * @stack.link: pointer to &struct list_head. + * @ent_enum: Visited entities + * @top: The top of the stack + */ +struct media_graph { + struct { + struct media_entity *entity; + struct list_head *link; + } stack[MEDIA_ENTITY_ENUM_MAX_DEPTH]; + + struct media_entity_enum ent_enum; + int top; +}; + +/** + * struct media_pipeline - Media pipeline related information + * + * @streaming_count: Streaming start count - streaming stop count + * @graph: Media graph walk during pipeline start / stop + */ +struct media_pipeline { + int streaming_count; + struct media_graph graph; +}; + +/** + * struct media_link - A link object part of a media graph. + * + * @graph_obj: Embedded structure containing the media object common data + * @list: Linked list associated with an entity or an interface that + * owns the link. + * @gobj0: Part of a union. Used to get the pointer for the first + * graph_object of the link. + * @source: Part of a union. Used only if the first object (gobj0) is + * a pad. In that case, it represents the source pad. + * @intf: Part of a union. Used only if the first object (gobj0) is + * an interface. + * @gobj1: Part of a union. Used to get the pointer for the second + * graph_object of the link. + * @sink: Part of a union. Used only if the second object (gobj1) is + * a pad. In that case, it represents the sink pad. + * @entity: Part of a union. Used only if the second object (gobj1) is + * an entity. + * @reverse: Pointer to the link for the reverse direction of a pad to pad + * link. + * @flags: Link flags, as defined in uapi/media.h (MEDIA_LNK_FL_*) + * @is_backlink: Indicate if the link is a backlink. + */ +struct media_link { + struct media_gobj graph_obj; + struct list_head list; + union { + struct media_gobj *gobj0; + struct media_pad *source; + struct media_interface *intf; + }; + union { + struct media_gobj *gobj1; + struct media_pad *sink; + struct media_entity *entity; + }; + struct media_link *reverse; + unsigned long flags; + bool is_backlink; +}; + +/** + * enum media_pad_signal_type - type of the signal inside a media pad + * + * @PAD_SIGNAL_DEFAULT: + * Default signal. Use this when all inputs or all outputs are + * uniquely identified by the pad number. + * @PAD_SIGNAL_ANALOG: + * The pad contains an analog signal. It can be Radio Frequency, + * Intermediate Frequency, a baseband signal or sub-cariers. + * Tuner inputs, IF-PLL demodulators, composite and s-video signals + * should use it. + * @PAD_SIGNAL_DV: + * Contains a digital video signal, with can be a bitstream of samples + * taken from an analog TV video source. On such case, it usually + * contains the VBI data on it. + * @PAD_SIGNAL_AUDIO: + * Contains an Intermediate Frequency analog signal from an audio + * sub-carrier or an audio bitstream. IF signals are provided by tuners + * and consumed by audio AM/FM decoders. Bitstream audio is provided by + * an audio decoder. + */ +enum media_pad_signal_type { + PAD_SIGNAL_DEFAULT = 0, + PAD_SIGNAL_ANALOG, + PAD_SIGNAL_DV, + PAD_SIGNAL_AUDIO, +}; + +/** + * struct media_pad - A media pad graph object. + * + * @graph_obj: Embedded structure containing the media object common data + * @entity: Entity this pad belongs to + * @index: Pad index in the entity pads array, numbered from 0 to n + * @sig_type: Type of the signal inside a media pad + * @flags: Pad flags, as defined in + * :ref:`include/uapi/linux/media.h <media_header>` + * (seek for ``MEDIA_PAD_FL_*``) + */ +struct media_pad { + struct media_gobj graph_obj; /* must be first field in struct */ + struct media_entity *entity; + u16 index; + enum media_pad_signal_type sig_type; + unsigned long flags; +}; + +/** + * struct media_entity_operations - Media entity operations + * @get_fwnode_pad: Return the pad number based on a fwnode endpoint or + * a negative value on error. This operation can be used + * to map a fwnode to a media pad number. Optional. + * @link_setup: Notify the entity of link changes. The operation can + * return an error, in which case link setup will be + * cancelled. Optional. + * @link_validate: Return whether a link is valid from the entity point of + * view. The media_pipeline_start() function + * validates all links by calling this operation. Optional. + * + * .. note:: + * + * Those these callbacks are called with struct &media_device.graph_mutex + * mutex held. + */ +struct media_entity_operations { + int (*get_fwnode_pad)(struct media_entity *entity, + struct fwnode_endpoint *endpoint); + int (*link_setup)(struct media_entity *entity, + const struct media_pad *local, + const struct media_pad *remote, u32 flags); + int (*link_validate)(struct media_link *link); +}; + +/** + * enum media_entity_type - Media entity type + * + * @MEDIA_ENTITY_TYPE_BASE: + * The entity isn't embedded in another subsystem structure. + * @MEDIA_ENTITY_TYPE_VIDEO_DEVICE: + * The entity is embedded in a struct video_device instance. + * @MEDIA_ENTITY_TYPE_V4L2_SUBDEV: + * The entity is embedded in a struct v4l2_subdev instance. + * + * Media entity objects are often not instantiated directly, but the media + * entity structure is inherited by (through embedding) other subsystem-specific + * structures. The media entity type identifies the type of the subclass + * structure that implements a media entity instance. + * + * This allows runtime type identification of media entities and safe casting to + * the correct object type. For instance, a media entity structure instance + * embedded in a v4l2_subdev structure instance will have the type + * %MEDIA_ENTITY_TYPE_V4L2_SUBDEV and can safely be cast to a &v4l2_subdev + * structure using the container_of() macro. + */ +enum media_entity_type { + MEDIA_ENTITY_TYPE_BASE, + MEDIA_ENTITY_TYPE_VIDEO_DEVICE, + MEDIA_ENTITY_TYPE_V4L2_SUBDEV, +}; + +/** + * struct media_entity - A media entity graph object. + * + * @graph_obj: Embedded structure containing the media object common data. + * @name: Entity name. + * @obj_type: Type of the object that implements the media_entity. + * @function: Entity main function, as defined in + * :ref:`include/uapi/linux/media.h <media_header>` + * (seek for ``MEDIA_ENT_F_*``) + * @flags: Entity flags, as defined in + * :ref:`include/uapi/linux/media.h <media_header>` + * (seek for ``MEDIA_ENT_FL_*``) + * @num_pads: Number of sink and source pads. + * @num_links: Total number of links, forward and back, enabled and disabled. + * @num_backlinks: Number of backlinks + * @internal_idx: An unique internal entity specific number. The numbers are + * re-used if entities are unregistered or registered again. + * @pads: Pads array with the size defined by @num_pads. + * @links: List of data links. + * @ops: Entity operations. + * @stream_count: Stream count for the entity. + * @use_count: Use count for the entity. + * @pipe: Pipeline this entity belongs to. + * @info: Union with devnode information. Kept just for backward + * compatibility. + * @info.dev: Contains device major and minor info. + * @info.dev.major: device node major, if the device is a devnode. + * @info.dev.minor: device node minor, if the device is a devnode. + * @major: Devnode major number (zero if not applicable). Kept just + * for backward compatibility. + * @minor: Devnode minor number (zero if not applicable). Kept just + * for backward compatibility. + * + * .. note:: + * + * @stream_count and @use_count reference counts must never be + * negative, but are signed integers on purpose: a simple ``WARN_ON(<0)`` + * check can be used to detect reference count bugs that would make them + * negative. + */ +struct media_entity { + struct media_gobj graph_obj; /* must be first field in struct */ + const char *name; + enum media_entity_type obj_type; + u32 function; + unsigned long flags; + + u16 num_pads; + u16 num_links; + u16 num_backlinks; + int internal_idx; + + struct media_pad *pads; + struct list_head links; + + const struct media_entity_operations *ops; + + int stream_count; + int use_count; + + struct media_pipeline *pipe; + + union { + struct { + u32 major; + u32 minor; + } dev; + } info; +}; + +/** + * struct media_interface - A media interface graph object. + * + * @graph_obj: embedded graph object + * @links: List of links pointing to graph entities + * @type: Type of the interface as defined in + * :ref:`include/uapi/linux/media.h <media_header>` + * (seek for ``MEDIA_INTF_T_*``) + * @flags: Interface flags as defined in + * :ref:`include/uapi/linux/media.h <media_header>` + * (seek for ``MEDIA_INTF_FL_*``) + * + * .. note:: + * + * Currently, no flags for &media_interface is defined. + */ +struct media_interface { + struct media_gobj graph_obj; + struct list_head links; + u32 type; + u32 flags; +}; + +/** + * struct media_intf_devnode - A media interface via a device node. + * + * @intf: embedded interface object + * @major: Major number of a device node + * @minor: Minor number of a device node + */ +struct media_intf_devnode { + struct media_interface intf; + + /* Should match the fields at media_v2_intf_devnode */ + u32 major; + u32 minor; +}; + +/** + * media_entity_id() - return the media entity graph object id + * + * @entity: pointer to &media_entity + */ +static inline u32 media_entity_id(struct media_entity *entity) +{ + return entity->graph_obj.id; +} + +/** + * media_type() - return the media object type + * + * @gobj: Pointer to the struct &media_gobj graph object + */ +static inline enum media_gobj_type media_type(struct media_gobj *gobj) +{ + return gobj->id >> MEDIA_BITS_PER_ID; +} + +/** + * media_id() - return the media object ID + * + * @gobj: Pointer to the struct &media_gobj graph object + */ +static inline u32 media_id(struct media_gobj *gobj) +{ + return gobj->id & MEDIA_ID_MASK; +} + +/** + * media_gobj_gen_id() - encapsulates type and ID on at the object ID + * + * @type: object type as define at enum &media_gobj_type. + * @local_id: next ID, from struct &media_device.id. + */ +static inline u32 media_gobj_gen_id(enum media_gobj_type type, u64 local_id) +{ + u32 id; + + id = type << MEDIA_BITS_PER_ID; + id |= local_id & MEDIA_ID_MASK; + + return id; +} + +/** + * is_media_entity_v4l2_video_device() - Check if the entity is a video_device + * @entity: pointer to entity + * + * Return: %true if the entity is an instance of a video_device object and can + * safely be cast to a struct video_device using the container_of() macro, or + * %false otherwise. + */ +static inline bool is_media_entity_v4l2_video_device(struct media_entity *entity) +{ + return entity && entity->obj_type == MEDIA_ENTITY_TYPE_VIDEO_DEVICE; +} + +/** + * is_media_entity_v4l2_subdev() - Check if the entity is a v4l2_subdev + * @entity: pointer to entity + * + * Return: %true if the entity is an instance of a &v4l2_subdev object and can + * safely be cast to a struct &v4l2_subdev using the container_of() macro, or + * %false otherwise. + */ +static inline bool is_media_entity_v4l2_subdev(struct media_entity *entity) +{ + return entity && entity->obj_type == MEDIA_ENTITY_TYPE_V4L2_SUBDEV; +} + +/** + * __media_entity_enum_init - Initialise an entity enumeration + * + * @ent_enum: Entity enumeration to be initialised + * @idx_max: Maximum number of entities in the enumeration + * + * Return: Returns zero on success or a negative error code. + */ +__must_check int __media_entity_enum_init(struct media_entity_enum *ent_enum, + int idx_max); + +/** + * media_entity_enum_cleanup - Release resources of an entity enumeration + * + * @ent_enum: Entity enumeration to be released + */ +void media_entity_enum_cleanup(struct media_entity_enum *ent_enum); + +/** + * media_entity_enum_zero - Clear the entire enum + * + * @ent_enum: Entity enumeration to be cleared + */ +static inline void media_entity_enum_zero(struct media_entity_enum *ent_enum) +{ + bitmap_zero(ent_enum->bmap, ent_enum->idx_max); +} + +/** + * media_entity_enum_set - Mark a single entity in the enum + * + * @ent_enum: Entity enumeration + * @entity: Entity to be marked + */ +static inline void media_entity_enum_set(struct media_entity_enum *ent_enum, + struct media_entity *entity) +{ + if (WARN_ON(entity->internal_idx >= ent_enum->idx_max)) + return; + + __set_bit(entity->internal_idx, ent_enum->bmap); +} + +/** + * media_entity_enum_clear - Unmark a single entity in the enum + * + * @ent_enum: Entity enumeration + * @entity: Entity to be unmarked + */ +static inline void media_entity_enum_clear(struct media_entity_enum *ent_enum, + struct media_entity *entity) +{ + if (WARN_ON(entity->internal_idx >= ent_enum->idx_max)) + return; + + __clear_bit(entity->internal_idx, ent_enum->bmap); +} + +/** + * media_entity_enum_test - Test whether the entity is marked + * + * @ent_enum: Entity enumeration + * @entity: Entity to be tested + * + * Returns %true if the entity was marked. + */ +static inline bool media_entity_enum_test(struct media_entity_enum *ent_enum, + struct media_entity *entity) +{ + if (WARN_ON(entity->internal_idx >= ent_enum->idx_max)) + return true; + + return test_bit(entity->internal_idx, ent_enum->bmap); +} + +/** + * media_entity_enum_test_and_set - Test whether the entity is marked, + * and mark it + * + * @ent_enum: Entity enumeration + * @entity: Entity to be tested + * + * Returns %true if the entity was marked, and mark it before doing so. + */ +static inline bool +media_entity_enum_test_and_set(struct media_entity_enum *ent_enum, + struct media_entity *entity) +{ + if (WARN_ON(entity->internal_idx >= ent_enum->idx_max)) + return true; + + return __test_and_set_bit(entity->internal_idx, ent_enum->bmap); +} + +/** + * media_entity_enum_empty - Test whether the entire enum is empty + * + * @ent_enum: Entity enumeration + * + * Return: %true if the entity was empty. + */ +static inline bool media_entity_enum_empty(struct media_entity_enum *ent_enum) +{ + return bitmap_empty(ent_enum->bmap, ent_enum->idx_max); +} + +/** + * media_entity_enum_intersects - Test whether two enums intersect + * + * @ent_enum1: First entity enumeration + * @ent_enum2: Second entity enumeration + * + * Return: %true if entity enumerations @ent_enum1 and @ent_enum2 intersect, + * otherwise %false. + */ +static inline bool media_entity_enum_intersects( + struct media_entity_enum *ent_enum1, + struct media_entity_enum *ent_enum2) +{ + WARN_ON(ent_enum1->idx_max != ent_enum2->idx_max); + + return bitmap_intersects(ent_enum1->bmap, ent_enum2->bmap, + min(ent_enum1->idx_max, ent_enum2->idx_max)); +} + +/** + * gobj_to_entity - returns the struct &media_entity pointer from the + * @gobj contained on it. + * + * @gobj: Pointer to the struct &media_gobj graph object + */ +#define gobj_to_entity(gobj) \ + container_of(gobj, struct media_entity, graph_obj) + +/** + * gobj_to_pad - returns the struct &media_pad pointer from the + * @gobj contained on it. + * + * @gobj: Pointer to the struct &media_gobj graph object + */ +#define gobj_to_pad(gobj) \ + container_of(gobj, struct media_pad, graph_obj) + +/** + * gobj_to_link - returns the struct &media_link pointer from the + * @gobj contained on it. + * + * @gobj: Pointer to the struct &media_gobj graph object + */ +#define gobj_to_link(gobj) \ + container_of(gobj, struct media_link, graph_obj) + +/** + * gobj_to_intf - returns the struct &media_interface pointer from the + * @gobj contained on it. + * + * @gobj: Pointer to the struct &media_gobj graph object + */ +#define gobj_to_intf(gobj) \ + container_of(gobj, struct media_interface, graph_obj) + +/** + * intf_to_devnode - returns the struct media_intf_devnode pointer from the + * @intf contained on it. + * + * @intf: Pointer to struct &media_intf_devnode + */ +#define intf_to_devnode(intf) \ + container_of(intf, struct media_intf_devnode, intf) + +/** + * media_gobj_create - Initialize a graph object + * + * @mdev: Pointer to the &media_device that contains the object + * @type: Type of the object + * @gobj: Pointer to the struct &media_gobj graph object + * + * This routine initializes the embedded struct &media_gobj inside a + * media graph object. It is called automatically if ``media_*_create`` + * function calls are used. However, if the object (entity, link, pad, + * interface) is embedded on some other object, this function should be + * called before registering the object at the media controller. + */ +void media_gobj_create(struct media_device *mdev, + enum media_gobj_type type, + struct media_gobj *gobj); + +/** + * media_gobj_destroy - Stop using a graph object on a media device + * + * @gobj: Pointer to the struct &media_gobj graph object + * + * This should be called by all routines like media_device_unregister() + * that remove/destroy media graph objects. + */ +void media_gobj_destroy(struct media_gobj *gobj); + +/** + * media_entity_pads_init() - Initialize the entity pads + * + * @entity: entity where the pads belong + * @num_pads: total number of sink and source pads + * @pads: Array of @num_pads pads. + * + * The pads array is managed by the entity driver and passed to + * media_entity_pads_init() where its pointer will be stored in the + * &media_entity structure. + * + * If no pads are needed, drivers could either directly fill + * &media_entity->num_pads with 0 and &media_entity->pads with %NULL or call + * this function that will do the same. + * + * As the number of pads is known in advance, the pads array is not allocated + * dynamically but is managed by the entity driver. Most drivers will embed the + * pads array in a driver-specific structure, avoiding dynamic allocation. + * + * Drivers must set the direction of every pad in the pads array before calling + * media_entity_pads_init(). The function will initialize the other pads fields. + */ +int media_entity_pads_init(struct media_entity *entity, u16 num_pads, + struct media_pad *pads); + +/** + * media_entity_cleanup() - free resources associated with an entity + * + * @entity: entity where the pads belong + * + * This function must be called during the cleanup phase after unregistering + * the entity (currently, it does nothing). + */ +#if IS_ENABLED(CONFIG_MEDIA_CONTROLLER) +static inline void media_entity_cleanup(struct media_entity *entity) {} +#else +#define media_entity_cleanup(entity) do { } while (false) +#endif + +/** + * media_get_pad_index() - retrieves a pad index from an entity + * + * @entity: entity where the pads belong + * @is_sink: true if the pad is a sink, false if it is a source + * @sig_type: type of signal of the pad to be search + * + * This helper function finds the first pad index inside an entity that + * satisfies both @is_sink and @sig_type conditions. + * + * Return: + * + * On success, return the pad number. If the pad was not found or the media + * entity is a NULL pointer, return -EINVAL. + */ +int media_get_pad_index(struct media_entity *entity, bool is_sink, + enum media_pad_signal_type sig_type); + +/** + * media_create_pad_link() - creates a link between two entities. + * + * @source: pointer to &media_entity of the source pad. + * @source_pad: number of the source pad in the pads array + * @sink: pointer to &media_entity of the sink pad. + * @sink_pad: number of the sink pad in the pads array. + * @flags: Link flags, as defined in + * :ref:`include/uapi/linux/media.h <media_header>` + * ( seek for ``MEDIA_LNK_FL_*``) + * + * Valid values for flags: + * + * %MEDIA_LNK_FL_ENABLED + * Indicates that the link is enabled and can be used to transfer media data. + * When two or more links target a sink pad, only one of them can be + * enabled at a time. + * + * %MEDIA_LNK_FL_IMMUTABLE + * Indicates that the link enabled state can't be modified at runtime. If + * %MEDIA_LNK_FL_IMMUTABLE is set, then %MEDIA_LNK_FL_ENABLED must also be + * set, since an immutable link is always enabled. + * + * .. note:: + * + * Before calling this function, media_entity_pads_init() and + * media_device_register_entity() should be called previously for both ends. + */ +__must_check int media_create_pad_link(struct media_entity *source, + u16 source_pad, struct media_entity *sink, + u16 sink_pad, u32 flags); + +/** + * media_create_pad_links() - creates a link between two entities. + * + * @mdev: Pointer to the media_device that contains the object + * @source_function: Function of the source entities. Used only if @source is + * NULL. + * @source: pointer to &media_entity of the source pad. If NULL, it will use + * all entities that matches the @sink_function. + * @source_pad: number of the source pad in the pads array + * @sink_function: Function of the sink entities. Used only if @sink is NULL. + * @sink: pointer to &media_entity of the sink pad. If NULL, it will use + * all entities that matches the @sink_function. + * @sink_pad: number of the sink pad in the pads array. + * @flags: Link flags, as defined in include/uapi/linux/media.h. + * @allow_both_undefined: if %true, then both @source and @sink can be NULL. + * In such case, it will create a crossbar between all entities that + * matches @source_function to all entities that matches @sink_function. + * If %false, it will return 0 and won't create any link if both @source + * and @sink are NULL. + * + * Valid values for flags: + * + * A %MEDIA_LNK_FL_ENABLED flag indicates that the link is enabled and can be + * used to transfer media data. If multiple links are created and this + * flag is passed as an argument, only the first created link will have + * this flag. + * + * A %MEDIA_LNK_FL_IMMUTABLE flag indicates that the link enabled state can't + * be modified at runtime. If %MEDIA_LNK_FL_IMMUTABLE is set, then + * %MEDIA_LNK_FL_ENABLED must also be set since an immutable link is + * always enabled. + * + * It is common for some devices to have multiple source and/or sink entities + * of the same type that should be linked. While media_create_pad_link() + * creates link by link, this function is meant to allow 1:n, n:1 and even + * cross-bar (n:n) links. + * + * .. note:: + * + * Before calling this function, media_entity_pads_init() and + * media_device_register_entity() should be called previously for the + * entities to be linked. + */ +int media_create_pad_links(const struct media_device *mdev, + const u32 source_function, + struct media_entity *source, + const u16 source_pad, + const u32 sink_function, + struct media_entity *sink, + const u16 sink_pad, + u32 flags, + const bool allow_both_undefined); + +void __media_entity_remove_links(struct media_entity *entity); + +/** + * media_entity_remove_links() - remove all links associated with an entity + * + * @entity: pointer to &media_entity + * + * .. note:: + * + * This is called automatically when an entity is unregistered via + * media_device_register_entity(). + */ +void media_entity_remove_links(struct media_entity *entity); + +/** + * __media_entity_setup_link - Configure a media link without locking + * @link: The link being configured + * @flags: Link configuration flags + * + * The bulk of link setup is handled by the two entities connected through the + * link. This function notifies both entities of the link configuration change. + * + * If the link is immutable or if the current and new configuration are + * identical, return immediately. + * + * The user is expected to hold link->source->parent->mutex. If not, + * media_entity_setup_link() should be used instead. + */ +int __media_entity_setup_link(struct media_link *link, u32 flags); + +/** + * media_entity_setup_link() - changes the link flags properties in runtime + * + * @link: pointer to &media_link + * @flags: the requested new link flags + * + * The only configurable property is the %MEDIA_LNK_FL_ENABLED link flag + * to enable/disable a link. Links marked with the + * %MEDIA_LNK_FL_IMMUTABLE link flag can not be enabled or disabled. + * + * When a link is enabled or disabled, the media framework calls the + * link_setup operation for the two entities at the source and sink of the + * link, in that order. If the second link_setup call fails, another + * link_setup call is made on the first entity to restore the original link + * flags. + * + * Media device drivers can be notified of link setup operations by setting the + * &media_device.link_notify pointer to a callback function. If provided, the + * notification callback will be called before enabling and after disabling + * links. + * + * Entity drivers must implement the link_setup operation if any of their links + * is non-immutable. The operation must either configure the hardware or store + * the configuration information to be applied later. + * + * Link configuration must not have any side effect on other links. If an + * enabled link at a sink pad prevents another link at the same pad from + * being enabled, the link_setup operation must return %-EBUSY and can't + * implicitly disable the first enabled link. + * + * .. note:: + * + * The valid values of the flags for the link is the same as described + * on media_create_pad_link(), for pad to pad links or the same as described + * on media_create_intf_link(), for interface to entity links. + */ +int media_entity_setup_link(struct media_link *link, u32 flags); + +/** + * media_entity_find_link - Find a link between two pads + * @source: Source pad + * @sink: Sink pad + * + * Return: returns a pointer to the link between the two entities. If no + * such link exists, return %NULL. + */ +struct media_link *media_entity_find_link(struct media_pad *source, + struct media_pad *sink); + +/** + * media_entity_remote_pad - Find the pad at the remote end of a link + * @pad: Pad at the local end of the link + * + * Search for a remote pad connected to the given pad by iterating over all + * links originating or terminating at that pad until an enabled link is found. + * + * Return: returns a pointer to the pad at the remote end of the first found + * enabled link, or %NULL if no enabled link has been found. + */ +struct media_pad *media_entity_remote_pad(const struct media_pad *pad); + +/** + * media_entity_get_fwnode_pad - Get pad number from fwnode + * + * @entity: The entity + * @fwnode: Pointer to the fwnode_handle which should be used to find the pad + * @direction_flags: Expected direction of the pad, as defined in + * :ref:`include/uapi/linux/media.h <media_header>` + * (seek for ``MEDIA_PAD_FL_*``) + * + * This function can be used to resolve the media pad number from + * a fwnode. This is useful for devices which use more complex + * mappings of media pads. + * + * If the entity does not implement the get_fwnode_pad() operation + * then this function searches the entity for the first pad that + * matches the @direction_flags. + * + * Return: returns the pad number on success or a negative error code. + */ +int media_entity_get_fwnode_pad(struct media_entity *entity, + struct fwnode_handle *fwnode, + unsigned long direction_flags); + +/** + * media_graph_walk_init - Allocate resources used by graph walk. + * + * @graph: Media graph structure that will be used to walk the graph + * @mdev: Pointer to the &media_device that contains the object + */ +__must_check int media_graph_walk_init( + struct media_graph *graph, struct media_device *mdev); + +/** + * media_graph_walk_cleanup - Release resources used by graph walk. + * + * @graph: Media graph structure that will be used to walk the graph + */ +void media_graph_walk_cleanup(struct media_graph *graph); + +/** + * media_graph_walk_start - Start walking the media graph at a + * given entity + * + * @graph: Media graph structure that will be used to walk the graph + * @entity: Starting entity + * + * Before using this function, media_graph_walk_init() must be + * used to allocate resources used for walking the graph. This + * function initializes the graph traversal structure to walk the + * entities graph starting at the given entity. The traversal + * structure must not be modified by the caller during graph + * traversal. After the graph walk, the resources must be released + * using media_graph_walk_cleanup(). + */ +void media_graph_walk_start(struct media_graph *graph, + struct media_entity *entity); + +/** + * media_graph_walk_next - Get the next entity in the graph + * @graph: Media graph structure + * + * Perform a depth-first traversal of the given media entities graph. + * + * The graph structure must have been previously initialized with a call to + * media_graph_walk_start(). + * + * Return: returns the next entity in the graph or %NULL if the whole graph + * have been traversed. + */ +struct media_entity *media_graph_walk_next(struct media_graph *graph); + +/** + * media_pipeline_start - Mark a pipeline as streaming + * @entity: Starting entity + * @pipe: Media pipeline to be assigned to all entities in the pipeline. + * + * Mark all entities connected to a given entity through enabled links, either + * directly or indirectly, as streaming. The given pipeline object is assigned + * to every entity in the pipeline and stored in the media_entity pipe field. + * + * Calls to this function can be nested, in which case the same number of + * media_pipeline_stop() calls will be required to stop streaming. The + * pipeline pointer must be identical for all nested calls to + * media_pipeline_start(). + */ +__must_check int media_pipeline_start(struct media_entity *entity, + struct media_pipeline *pipe); +/** + * __media_pipeline_start - Mark a pipeline as streaming + * + * @entity: Starting entity + * @pipe: Media pipeline to be assigned to all entities in the pipeline. + * + * ..note:: This is the non-locking version of media_pipeline_start() + */ +__must_check int __media_pipeline_start(struct media_entity *entity, + struct media_pipeline *pipe); + +/** + * media_pipeline_stop - Mark a pipeline as not streaming + * @entity: Starting entity + * + * Mark all entities connected to a given entity through enabled links, either + * directly or indirectly, as not streaming. The media_entity pipe field is + * reset to %NULL. + * + * If multiple calls to media_pipeline_start() have been made, the same + * number of calls to this function are required to mark the pipeline as not + * streaming. + */ +void media_pipeline_stop(struct media_entity *entity); + +/** + * __media_pipeline_stop - Mark a pipeline as not streaming + * + * @entity: Starting entity + * + * .. note:: This is the non-locking version of media_pipeline_stop() + */ +void __media_pipeline_stop(struct media_entity *entity); + +/** + * media_devnode_create() - creates and initializes a device node interface + * + * @mdev: pointer to struct &media_device + * @type: type of the interface, as given by + * :ref:`include/uapi/linux/media.h <media_header>` + * ( seek for ``MEDIA_INTF_T_*``) macros. + * @flags: Interface flags, as defined in + * :ref:`include/uapi/linux/media.h <media_header>` + * ( seek for ``MEDIA_INTF_FL_*``) + * @major: Device node major number. + * @minor: Device node minor number. + * + * Return: if succeeded, returns a pointer to the newly allocated + * &media_intf_devnode pointer. + * + * .. note:: + * + * Currently, no flags for &media_interface is defined. + */ +struct media_intf_devnode * +__must_check media_devnode_create(struct media_device *mdev, + u32 type, u32 flags, + u32 major, u32 minor); +/** + * media_devnode_remove() - removes a device node interface + * + * @devnode: pointer to &media_intf_devnode to be freed. + * + * When a device node interface is removed, all links to it are automatically + * removed. + */ +void media_devnode_remove(struct media_intf_devnode *devnode); +struct media_link * + +/** + * media_create_intf_link() - creates a link between an entity and an interface + * + * @entity: pointer to %media_entity + * @intf: pointer to %media_interface + * @flags: Link flags, as defined in + * :ref:`include/uapi/linux/media.h <media_header>` + * ( seek for ``MEDIA_LNK_FL_*``) + * + * + * Valid values for flags: + * + * %MEDIA_LNK_FL_ENABLED + * Indicates that the interface is connected to the entity hardware. + * That's the default value for interfaces. An interface may be disabled if + * the hardware is busy due to the usage of some other interface that it is + * currently controlling the hardware. + * + * A typical example is an hybrid TV device that handle only one type of + * stream on a given time. So, when the digital TV is streaming, + * the V4L2 interfaces won't be enabled, as such device is not able to + * also stream analog TV or radio. + * + * .. note:: + * + * Before calling this function, media_devnode_create() should be called for + * the interface and media_device_register_entity() should be called for the + * interface that will be part of the link. + */ +__must_check media_create_intf_link(struct media_entity *entity, + struct media_interface *intf, + u32 flags); +/** + * __media_remove_intf_link() - remove a single interface link + * + * @link: pointer to &media_link. + * + * .. note:: This is an unlocked version of media_remove_intf_link() + */ +void __media_remove_intf_link(struct media_link *link); + +/** + * media_remove_intf_link() - remove a single interface link + * + * @link: pointer to &media_link. + * + * .. note:: Prefer to use this one, instead of __media_remove_intf_link() + */ +void media_remove_intf_link(struct media_link *link); + +/** + * __media_remove_intf_links() - remove all links associated with an interface + * + * @intf: pointer to &media_interface + * + * .. note:: This is an unlocked version of media_remove_intf_links(). + */ +void __media_remove_intf_links(struct media_interface *intf); + +/** + * media_remove_intf_links() - remove all links associated with an interface + * + * @intf: pointer to &media_interface + * + * .. note:: + * + * #) This is called automatically when an entity is unregistered via + * media_device_register_entity() and by media_devnode_remove(). + * + * #) Prefer to use this one, instead of __media_remove_intf_links(). + */ +void media_remove_intf_links(struct media_interface *intf); + +/** + * media_entity_call - Calls a struct media_entity_operations operation on + * an entity + * + * @entity: entity where the @operation will be called + * @operation: type of the operation. Should be the name of a member of + * struct &media_entity_operations. + * + * This helper function will check if @operation is not %NULL. On such case, + * it will issue a call to @operation\(@entity, @args\). + */ + +#define media_entity_call(entity, operation, args...) \ + (((entity)->ops && (entity)->ops->operation) ? \ + (entity)->ops->operation((entity) , ##args) : -ENOIOCTLCMD) + +#endif diff --git a/include/media/media-request.h b/include/media/media-request.h new file mode 100644 index 000000000..3cd25a271 --- /dev/null +++ b/include/media/media-request.h @@ -0,0 +1,442 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Media device request objects + * + * Copyright 2018 Cisco Systems, Inc. and/or its affiliates. All rights reserved. + * Copyright (C) 2018 Intel Corporation + * + * Author: Hans Verkuil <hans.verkuil@cisco.com> + * Author: Sakari Ailus <sakari.ailus@linux.intel.com> + */ + +#ifndef MEDIA_REQUEST_H +#define MEDIA_REQUEST_H + +#include <linux/list.h> +#include <linux/slab.h> +#include <linux/spinlock.h> +#include <linux/refcount.h> + +#include <media/media-device.h> + +/** + * enum media_request_state - media request state + * + * @MEDIA_REQUEST_STATE_IDLE: Idle + * @MEDIA_REQUEST_STATE_VALIDATING: Validating the request, no state changes + * allowed + * @MEDIA_REQUEST_STATE_QUEUED: Queued + * @MEDIA_REQUEST_STATE_COMPLETE: Completed, the request is done + * @MEDIA_REQUEST_STATE_CLEANING: Cleaning, the request is being re-inited + * @MEDIA_REQUEST_STATE_UPDATING: The request is being updated, i.e. + * request objects are being added, + * modified or removed + * @NR_OF_MEDIA_REQUEST_STATE: The number of media request states, used + * internally for sanity check purposes + */ +enum media_request_state { + MEDIA_REQUEST_STATE_IDLE, + MEDIA_REQUEST_STATE_VALIDATING, + MEDIA_REQUEST_STATE_QUEUED, + MEDIA_REQUEST_STATE_COMPLETE, + MEDIA_REQUEST_STATE_CLEANING, + MEDIA_REQUEST_STATE_UPDATING, + NR_OF_MEDIA_REQUEST_STATE, +}; + +struct media_request_object; + +/** + * struct media_request - Media device request + * @mdev: Media device this request belongs to + * @kref: Reference count + * @debug_str: Prefix for debug messages (process name:fd) + * @state: The state of the request + * @updating_count: count the number of request updates that are in progress + * @access_count: count the number of request accesses that are in progress + * @objects: List of @struct media_request_object request objects + * @num_incomplete_objects: The number of incomplete objects in the request + * @poll_wait: Wait queue for poll + * @lock: Serializes access to this struct + */ +struct media_request { + struct media_device *mdev; + struct kref kref; + char debug_str[TASK_COMM_LEN + 11]; + enum media_request_state state; + unsigned int updating_count; + unsigned int access_count; + struct list_head objects; + unsigned int num_incomplete_objects; + wait_queue_head_t poll_wait; + spinlock_t lock; +}; + +#ifdef CONFIG_MEDIA_CONTROLLER + +/** + * media_request_lock_for_access - Lock the request to access its objects + * + * @req: The media request + * + * Use before accessing a completed request. A reference to the request must + * be held during the access. This usually takes place automatically through + * a file handle. Use @media_request_unlock_for_access when done. + */ +static inline int __must_check +media_request_lock_for_access(struct media_request *req) +{ + unsigned long flags; + int ret = -EBUSY; + + spin_lock_irqsave(&req->lock, flags); + if (req->state == MEDIA_REQUEST_STATE_COMPLETE) { + req->access_count++; + ret = 0; + } + spin_unlock_irqrestore(&req->lock, flags); + + return ret; +} + +/** + * media_request_unlock_for_access - Unlock a request previously locked for + * access + * + * @req: The media request + * + * Unlock a request that has previously been locked using + * @media_request_lock_for_access. + */ +static inline void media_request_unlock_for_access(struct media_request *req) +{ + unsigned long flags; + + spin_lock_irqsave(&req->lock, flags); + if (!WARN_ON(!req->access_count)) + req->access_count--; + spin_unlock_irqrestore(&req->lock, flags); +} + +/** + * media_request_lock_for_update - Lock the request for updating its objects + * + * @req: The media request + * + * Use before updating a request, i.e. adding, modifying or removing a request + * object in it. A reference to the request must be held during the update. This + * usually takes place automatically through a file handle. Use + * @media_request_unlock_for_update when done. + */ +static inline int __must_check +media_request_lock_for_update(struct media_request *req) +{ + unsigned long flags; + int ret = 0; + + spin_lock_irqsave(&req->lock, flags); + if (req->state == MEDIA_REQUEST_STATE_IDLE || + req->state == MEDIA_REQUEST_STATE_UPDATING) { + req->state = MEDIA_REQUEST_STATE_UPDATING; + req->updating_count++; + } else { + ret = -EBUSY; + } + spin_unlock_irqrestore(&req->lock, flags); + + return ret; +} + +/** + * media_request_unlock_for_update - Unlock a request previously locked for + * update + * + * @req: The media request + * + * Unlock a request that has previously been locked using + * @media_request_lock_for_update. + */ +static inline void media_request_unlock_for_update(struct media_request *req) +{ + unsigned long flags; + + spin_lock_irqsave(&req->lock, flags); + WARN_ON(req->updating_count <= 0); + if (!--req->updating_count) + req->state = MEDIA_REQUEST_STATE_IDLE; + spin_unlock_irqrestore(&req->lock, flags); +} + +/** + * media_request_get - Get the media request + * + * @req: The media request + * + * Get the media request. + */ +static inline void media_request_get(struct media_request *req) +{ + kref_get(&req->kref); +} + +/** + * media_request_put - Put the media request + * + * @req: The media request + * + * Put the media request. The media request will be released + * when the refcount reaches 0. + */ +void media_request_put(struct media_request *req); + +/** + * media_request_get_by_fd - Get a media request by fd + * + * @mdev: Media device this request belongs to + * @request_fd: The file descriptor of the request + * + * Get the request represented by @request_fd that is owned + * by the media device. + * + * Return a -EBADR error pointer if requests are not supported + * by this driver. Return -EINVAL if the request was not found. + * Return the pointer to the request if found: the caller will + * have to call @media_request_put when it finished using the + * request. + */ +struct media_request * +media_request_get_by_fd(struct media_device *mdev, int request_fd); + +/** + * media_request_alloc - Allocate the media request + * + * @mdev: Media device this request belongs to + * @alloc_fd: Store the request's file descriptor in this int + * + * Allocated the media request and put the fd in @alloc_fd. + */ +int media_request_alloc(struct media_device *mdev, + int *alloc_fd); + +#else + +static inline void media_request_get(struct media_request *req) +{ +} + +static inline void media_request_put(struct media_request *req) +{ +} + +static inline struct media_request * +media_request_get_by_fd(struct media_device *mdev, int request_fd) +{ + return ERR_PTR(-EBADR); +} + +#endif + +/** + * struct media_request_object_ops - Media request object operations + * @prepare: Validate and prepare the request object, optional. + * @unprepare: Unprepare the request object, optional. + * @queue: Queue the request object, optional. + * @unbind: Unbind the request object, optional. + * @release: Release the request object, required. + */ +struct media_request_object_ops { + int (*prepare)(struct media_request_object *object); + void (*unprepare)(struct media_request_object *object); + void (*queue)(struct media_request_object *object); + void (*unbind)(struct media_request_object *object); + void (*release)(struct media_request_object *object); +}; + +/** + * struct media_request_object - An opaque object that belongs to a media + * request + * + * @ops: object's operations + * @priv: object's priv pointer + * @req: the request this object belongs to (can be NULL) + * @list: List entry of the object for @struct media_request + * @kref: Reference count of the object, acquire before releasing req->lock + * @completed: If true, then this object was completed. + * + * An object related to the request. This struct is always embedded in + * another struct that contains the actual data for this request object. + */ +struct media_request_object { + const struct media_request_object_ops *ops; + void *priv; + struct media_request *req; + struct list_head list; + struct kref kref; + bool completed; +}; + +#ifdef CONFIG_MEDIA_CONTROLLER + +/** + * media_request_object_get - Get a media request object + * + * @obj: The object + * + * Get a media request object. + */ +static inline void media_request_object_get(struct media_request_object *obj) +{ + kref_get(&obj->kref); +} + +/** + * media_request_object_put - Put a media request object + * + * @obj: The object + * + * Put a media request object. Once all references are gone, the + * object's memory is released. + */ +void media_request_object_put(struct media_request_object *obj); + +/** + * media_request_object_find - Find an object in a request + * + * @req: The media request + * @ops: Find an object with this ops value + * @priv: Find an object with this priv value + * + * Both @ops and @priv must be non-NULL. + * + * Returns the object pointer or NULL if not found. The caller must + * call media_request_object_put() once it finished using the object. + * + * Since this function needs to walk the list of objects it takes + * the @req->lock spin lock to make this safe. + */ +struct media_request_object * +media_request_object_find(struct media_request *req, + const struct media_request_object_ops *ops, + void *priv); + +/** + * media_request_object_init - Initialise a media request object + * + * @obj: The object + * + * Initialise a media request object. The object will be released using the + * release callback of the ops once it has no references (this function + * initialises references to one). + */ +void media_request_object_init(struct media_request_object *obj); + +/** + * media_request_object_bind - Bind a media request object to a request + * + * @req: The media request + * @ops: The object ops for this object + * @priv: A driver-specific priv pointer associated with this object + * @is_buffer: Set to true if the object a buffer object. + * @obj: The object + * + * Bind this object to the request and set the ops and priv values of + * the object so it can be found later with media_request_object_find(). + * + * Every bound object must be unbound or completed by the kernel at some + * point in time, otherwise the request will never complete. When the + * request is released all completed objects will be unbound by the + * request core code. + * + * Buffer objects will be added to the end of the request's object + * list, non-buffer objects will be added to the front of the list. + * This ensures that all buffer objects are at the end of the list + * and that all non-buffer objects that they depend on are processed + * first. + */ +int media_request_object_bind(struct media_request *req, + const struct media_request_object_ops *ops, + void *priv, bool is_buffer, + struct media_request_object *obj); + +/** + * media_request_object_unbind - Unbind a media request object + * + * @obj: The object + * + * Unbind the media request object from the request. + */ +void media_request_object_unbind(struct media_request_object *obj); + +/** + * media_request_object_complete - Mark the media request object as complete + * + * @obj: The object + * + * Mark the media request object as complete. Only bound objects can + * be completed. + */ +void media_request_object_complete(struct media_request_object *obj); + +#else + +static inline int __must_check +media_request_lock_for_access(struct media_request *req) +{ + return -EINVAL; +} + +static inline void media_request_unlock_for_access(struct media_request *req) +{ +} + +static inline int __must_check +media_request_lock_for_update(struct media_request *req) +{ + return -EINVAL; +} + +static inline void media_request_unlock_for_update(struct media_request *req) +{ +} + +static inline void media_request_object_get(struct media_request_object *obj) +{ +} + +static inline void media_request_object_put(struct media_request_object *obj) +{ +} + +static inline struct media_request_object * +media_request_object_find(struct media_request *req, + const struct media_request_object_ops *ops, + void *priv) +{ + return NULL; +} + +static inline void media_request_object_init(struct media_request_object *obj) +{ + obj->ops = NULL; + obj->req = NULL; +} + +static inline int media_request_object_bind(struct media_request *req, + const struct media_request_object_ops *ops, + void *priv, bool is_buffer, + struct media_request_object *obj) +{ + return 0; +} + +static inline void media_request_object_unbind(struct media_request_object *obj) +{ +} + +static inline void media_request_object_complete(struct media_request_object *obj) +{ +} + +#endif + +#endif diff --git a/include/media/mpeg2-ctrls.h b/include/media/mpeg2-ctrls.h new file mode 100644 index 000000000..6601455b3 --- /dev/null +++ b/include/media/mpeg2-ctrls.h @@ -0,0 +1,82 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * These are the MPEG2 state controls for use with stateless MPEG-2 + * codec drivers. + * + * It turns out that these structs are not stable yet and will undergo + * more changes. So keep them private until they are stable and ready to + * become part of the official public API. + */ + +#ifndef _MPEG2_CTRLS_H_ +#define _MPEG2_CTRLS_H_ + +#define V4L2_CID_MPEG_VIDEO_MPEG2_SLICE_PARAMS (V4L2_CID_MPEG_BASE+250) +#define V4L2_CID_MPEG_VIDEO_MPEG2_QUANTIZATION (V4L2_CID_MPEG_BASE+251) + +/* enum v4l2_ctrl_type type values */ +#define V4L2_CTRL_TYPE_MPEG2_SLICE_PARAMS 0x0103 +#define V4L2_CTRL_TYPE_MPEG2_QUANTIZATION 0x0104 + +#define V4L2_MPEG2_PICTURE_CODING_TYPE_I 1 +#define V4L2_MPEG2_PICTURE_CODING_TYPE_P 2 +#define V4L2_MPEG2_PICTURE_CODING_TYPE_B 3 +#define V4L2_MPEG2_PICTURE_CODING_TYPE_D 4 + +struct v4l2_mpeg2_sequence { + /* ISO/IEC 13818-2, ITU-T Rec. H.262: Sequence header */ + __u16 horizontal_size; + __u16 vertical_size; + __u32 vbv_buffer_size; + + /* ISO/IEC 13818-2, ITU-T Rec. H.262: Sequence extension */ + __u16 profile_and_level_indication; + __u8 progressive_sequence; + __u8 chroma_format; +}; + +struct v4l2_mpeg2_picture { + /* ISO/IEC 13818-2, ITU-T Rec. H.262: Picture header */ + __u8 picture_coding_type; + + /* ISO/IEC 13818-2, ITU-T Rec. H.262: Picture coding extension */ + __u8 f_code[2][2]; + __u8 intra_dc_precision; + __u8 picture_structure; + __u8 top_field_first; + __u8 frame_pred_frame_dct; + __u8 concealment_motion_vectors; + __u8 q_scale_type; + __u8 intra_vlc_format; + __u8 alternate_scan; + __u8 repeat_first_field; + __u16 progressive_frame; +}; + +struct v4l2_ctrl_mpeg2_slice_params { + __u32 bit_size; + __u32 data_bit_offset; + __u64 backward_ref_ts; + __u64 forward_ref_ts; + + struct v4l2_mpeg2_sequence sequence; + struct v4l2_mpeg2_picture picture; + + /* ISO/IEC 13818-2, ITU-T Rec. H.262: Slice */ + __u32 quantiser_scale_code; +}; + +struct v4l2_ctrl_mpeg2_quantization { + /* ISO/IEC 13818-2, ITU-T Rec. H.262: Quant matrix extension */ + __u8 load_intra_quantiser_matrix; + __u8 load_non_intra_quantiser_matrix; + __u8 load_chroma_intra_quantiser_matrix; + __u8 load_chroma_non_intra_quantiser_matrix; + + __u8 intra_quantiser_matrix[64]; + __u8 non_intra_quantiser_matrix[64]; + __u8 chroma_intra_quantiser_matrix[64]; + __u8 chroma_non_intra_quantiser_matrix[64]; +}; + +#endif diff --git a/include/media/rc-core.h b/include/media/rc-core.h new file mode 100644 index 000000000..a1019c4ab --- /dev/null +++ b/include/media/rc-core.h @@ -0,0 +1,384 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Remote Controller core header + * + * Copyright (C) 2009-2010 by Mauro Carvalho Chehab + */ + +#ifndef _RC_CORE +#define _RC_CORE + +#include <linux/spinlock.h> +#include <linux/cdev.h> +#include <linux/kfifo.h> +#include <linux/time.h> +#include <linux/timer.h> +#include <media/rc-map.h> + +/** + * enum rc_driver_type - type of the RC driver. + * + * @RC_DRIVER_SCANCODE: Driver or hardware generates a scancode. + * @RC_DRIVER_IR_RAW: Driver or hardware generates pulse/space sequences. + * It needs a Infra-Red pulse/space decoder + * @RC_DRIVER_IR_RAW_TX: Device transmitter only, + * driver requires pulse/space data sequence. + */ +enum rc_driver_type { + RC_DRIVER_SCANCODE = 0, + RC_DRIVER_IR_RAW, + RC_DRIVER_IR_RAW_TX, +}; + +/** + * struct rc_scancode_filter - Filter scan codes. + * @data: Scancode data to match. + * @mask: Mask of bits of scancode to compare. + */ +struct rc_scancode_filter { + u32 data; + u32 mask; +}; + +/** + * enum rc_filter_type - Filter type constants. + * @RC_FILTER_NORMAL: Filter for normal operation. + * @RC_FILTER_WAKEUP: Filter for waking from suspend. + * @RC_FILTER_MAX: Number of filter types. + */ +enum rc_filter_type { + RC_FILTER_NORMAL = 0, + RC_FILTER_WAKEUP, + + RC_FILTER_MAX +}; + +/** + * struct lirc_fh - represents an open lirc file + * @list: list of open file handles + * @rc: rcdev for this lirc chardev + * @carrier_low: when setting the carrier range, first the low end must be + * set with an ioctl and then the high end with another ioctl + * @send_timeout_reports: report timeouts in lirc raw IR. + * @rawir: queue for incoming raw IR + * @scancodes: queue for incoming decoded scancodes + * @wait_poll: poll struct for lirc device + * @send_mode: lirc mode for sending, either LIRC_MODE_SCANCODE or + * LIRC_MODE_PULSE + * @rec_mode: lirc mode for receiving, either LIRC_MODE_SCANCODE or + * LIRC_MODE_MODE2 + */ +struct lirc_fh { + struct list_head list; + struct rc_dev *rc; + int carrier_low; + bool send_timeout_reports; + DECLARE_KFIFO_PTR(rawir, unsigned int); + DECLARE_KFIFO_PTR(scancodes, struct lirc_scancode); + wait_queue_head_t wait_poll; + u8 send_mode; + u8 rec_mode; +}; + +/** + * struct rc_dev - represents a remote control device + * @dev: driver model's view of this device + * @managed_alloc: devm_rc_allocate_device was used to create rc_dev + * @sysfs_groups: sysfs attribute groups + * @device_name: name of the rc child device + * @input_phys: physical path to the input child device + * @input_id: id of the input child device (struct input_id) + * @driver_name: name of the hardware driver which registered this device + * @map_name: name of the default keymap + * @rc_map: current scan/key table + * @lock: used to ensure we've filled in all protocol details before + * anyone can call show_protocols or store_protocols + * @minor: unique minor remote control device number + * @raw: additional data for raw pulse/space devices + * @input_dev: the input child device used to communicate events to userspace + * @driver_type: specifies if protocol decoding is done in hardware or software + * @idle: used to keep track of RX state + * @encode_wakeup: wakeup filtering uses IR encode API, therefore the allowed + * wakeup protocols is the set of all raw encoders + * @allowed_protocols: bitmask with the supported RC_PROTO_BIT_* protocols + * @enabled_protocols: bitmask with the enabled RC_PROTO_BIT_* protocols + * @allowed_wakeup_protocols: bitmask with the supported RC_PROTO_BIT_* wakeup + * protocols + * @wakeup_protocol: the enabled RC_PROTO_* wakeup protocol or + * RC_PROTO_UNKNOWN if disabled. + * @scancode_filter: scancode filter + * @scancode_wakeup_filter: scancode wakeup filters + * @scancode_mask: some hardware decoders are not capable of providing the full + * scancode to the application. As this is a hardware limit, we can't do + * anything with it. Yet, as the same keycode table can be used with other + * devices, a mask is provided to allow its usage. Drivers should generally + * leave this field in blank + * @users: number of current users of the device + * @priv: driver-specific data + * @keylock: protects the remaining members of the struct + * @keypressed: whether a key is currently pressed + * @keyup_jiffies: time (in jiffies) when the current keypress should be released + * @timer_keyup: timer for releasing a keypress + * @timer_repeat: timer for autorepeat events. This is needed for CEC, which + * has non-standard repeats. + * @last_keycode: keycode of last keypress + * @last_protocol: protocol of last keypress + * @last_scancode: scancode of last keypress + * @last_toggle: toggle value of last command + * @timeout: optional time after which device stops sending data + * @min_timeout: minimum timeout supported by device + * @max_timeout: maximum timeout supported by device + * @rx_resolution : resolution (in us) of input sampler + * @tx_resolution: resolution (in us) of output sampler + * @lirc_dev: lirc device + * @lirc_cdev: lirc char cdev + * @gap_start: time when gap starts + * @gap_duration: duration of initial gap + * @gap: true if we're in a gap + * @lirc_fh_lock: protects lirc_fh list + * @lirc_fh: list of open files + * @registered: set to true by rc_register_device(), false by + * rc_unregister_device + * @change_protocol: allow changing the protocol used on hardware decoders + * @open: callback to allow drivers to enable polling/irq when IR input device + * is opened. + * @close: callback to allow drivers to disable polling/irq when IR input device + * is opened. + * @s_tx_mask: set transmitter mask (for devices with multiple tx outputs) + * @s_tx_carrier: set transmit carrier frequency + * @s_tx_duty_cycle: set transmit duty cycle (0% - 100%) + * @s_rx_carrier_range: inform driver about carrier it is expected to handle + * @tx_ir: transmit IR + * @s_idle: enable/disable hardware idle mode, upon which, + * device doesn't interrupt host until it sees IR pulses + * @s_learning_mode: enable wide band receiver used for learning + * @s_carrier_report: enable carrier reports + * @s_filter: set the scancode filter + * @s_wakeup_filter: set the wakeup scancode filter. If the mask is zero + * then wakeup should be disabled. wakeup_protocol will be set to + * a valid protocol if mask is nonzero. + * @s_timeout: set hardware timeout in us + */ +struct rc_dev { + struct device dev; + bool managed_alloc; + const struct attribute_group *sysfs_groups[5]; + const char *device_name; + const char *input_phys; + struct input_id input_id; + const char *driver_name; + const char *map_name; + struct rc_map rc_map; + struct mutex lock; + unsigned int minor; + struct ir_raw_event_ctrl *raw; + struct input_dev *input_dev; + enum rc_driver_type driver_type; + bool idle; + bool encode_wakeup; + u64 allowed_protocols; + u64 enabled_protocols; + u64 allowed_wakeup_protocols; + enum rc_proto wakeup_protocol; + struct rc_scancode_filter scancode_filter; + struct rc_scancode_filter scancode_wakeup_filter; + u32 scancode_mask; + u32 users; + void *priv; + spinlock_t keylock; + bool keypressed; + unsigned long keyup_jiffies; + struct timer_list timer_keyup; + struct timer_list timer_repeat; + u32 last_keycode; + enum rc_proto last_protocol; + u64 last_scancode; + u8 last_toggle; + u32 timeout; + u32 min_timeout; + u32 max_timeout; + u32 rx_resolution; + u32 tx_resolution; +#ifdef CONFIG_LIRC + struct device lirc_dev; + struct cdev lirc_cdev; + ktime_t gap_start; + u64 gap_duration; + bool gap; + spinlock_t lirc_fh_lock; + struct list_head lirc_fh; +#endif + bool registered; + int (*change_protocol)(struct rc_dev *dev, u64 *rc_proto); + int (*open)(struct rc_dev *dev); + void (*close)(struct rc_dev *dev); + int (*s_tx_mask)(struct rc_dev *dev, u32 mask); + int (*s_tx_carrier)(struct rc_dev *dev, u32 carrier); + int (*s_tx_duty_cycle)(struct rc_dev *dev, u32 duty_cycle); + int (*s_rx_carrier_range)(struct rc_dev *dev, u32 min, u32 max); + int (*tx_ir)(struct rc_dev *dev, unsigned *txbuf, unsigned n); + void (*s_idle)(struct rc_dev *dev, bool enable); + int (*s_learning_mode)(struct rc_dev *dev, int enable); + int (*s_carrier_report) (struct rc_dev *dev, int enable); + int (*s_filter)(struct rc_dev *dev, + struct rc_scancode_filter *filter); + int (*s_wakeup_filter)(struct rc_dev *dev, + struct rc_scancode_filter *filter); + int (*s_timeout)(struct rc_dev *dev, + unsigned int timeout); +}; + +#define to_rc_dev(d) container_of(d, struct rc_dev, dev) + +/* + * From rc-main.c + * Those functions can be used on any type of Remote Controller. They + * basically creates an input_dev and properly reports the device as a + * Remote Controller, at sys/class/rc. + */ + +/** + * rc_allocate_device - Allocates a RC device + * + * @rc_driver_type: specifies the type of the RC output to be allocated + * returns a pointer to struct rc_dev. + */ +struct rc_dev *rc_allocate_device(enum rc_driver_type); + +/** + * devm_rc_allocate_device - Managed RC device allocation + * + * @dev: pointer to struct device + * @rc_driver_type: specifies the type of the RC output to be allocated + * returns a pointer to struct rc_dev. + */ +struct rc_dev *devm_rc_allocate_device(struct device *dev, enum rc_driver_type); + +/** + * rc_free_device - Frees a RC device + * + * @dev: pointer to struct rc_dev. + */ +void rc_free_device(struct rc_dev *dev); + +/** + * rc_register_device - Registers a RC device + * + * @dev: pointer to struct rc_dev. + */ +int rc_register_device(struct rc_dev *dev); + +/** + * devm_rc_register_device - Manageded registering of a RC device + * + * @parent: pointer to struct device. + * @dev: pointer to struct rc_dev. + */ +int devm_rc_register_device(struct device *parent, struct rc_dev *dev); + +/** + * rc_unregister_device - Unregisters a RC device + * + * @dev: pointer to struct rc_dev. + */ +void rc_unregister_device(struct rc_dev *dev); + +void rc_repeat(struct rc_dev *dev); +void rc_keydown(struct rc_dev *dev, enum rc_proto protocol, u64 scancode, + u8 toggle); +void rc_keydown_notimeout(struct rc_dev *dev, enum rc_proto protocol, + u64 scancode, u8 toggle); +void rc_keyup(struct rc_dev *dev); +u32 rc_g_keycode_from_table(struct rc_dev *dev, u64 scancode); + +/* + * From rc-raw.c + * The Raw interface is specific to InfraRed. It may be a good idea to + * split it later into a separate header. + */ +struct ir_raw_event { + union { + u32 duration; + u32 carrier; + }; + u8 duty_cycle; + + unsigned pulse:1; + unsigned reset:1; + unsigned timeout:1; + unsigned carrier_report:1; +}; + +#define US_TO_NS(usec) ((usec) * 1000) +#define MS_TO_US(msec) ((msec) * 1000) +#define IR_MAX_DURATION MS_TO_US(500) +#define IR_DEFAULT_TIMEOUT MS_TO_US(125) + +void ir_raw_event_handle(struct rc_dev *dev); +int ir_raw_event_store(struct rc_dev *dev, struct ir_raw_event *ev); +int ir_raw_event_store_edge(struct rc_dev *dev, bool pulse); +int ir_raw_event_store_with_filter(struct rc_dev *dev, + struct ir_raw_event *ev); +int ir_raw_event_store_with_timeout(struct rc_dev *dev, + struct ir_raw_event *ev); +void ir_raw_event_set_idle(struct rc_dev *dev, bool idle); +int ir_raw_encode_scancode(enum rc_proto protocol, u32 scancode, + struct ir_raw_event *events, unsigned int max); +int ir_raw_encode_carrier(enum rc_proto protocol); + +static inline void ir_raw_event_reset(struct rc_dev *dev) +{ + ir_raw_event_store(dev, &((struct ir_raw_event) { .reset = true })); + dev->idle = true; + ir_raw_event_handle(dev); +} + +/* extract mask bits out of data and pack them into the result */ +static inline u32 ir_extract_bits(u32 data, u32 mask) +{ + u32 vbit = 1, value = 0; + + do { + if (mask & 1) { + if (data & 1) + value |= vbit; + vbit <<= 1; + } + data >>= 1; + } while (mask >>= 1); + + return value; +} + +/* Get NEC scancode and protocol type from address and command bytes */ +static inline u32 ir_nec_bytes_to_scancode(u8 address, u8 not_address, + u8 command, u8 not_command, + enum rc_proto *protocol) +{ + u32 scancode; + + if ((command ^ not_command) != 0xff) { + /* NEC transport, but modified protocol, used by at + * least Apple and TiVo remotes + */ + scancode = not_address << 24 | + address << 16 | + not_command << 8 | + command; + *protocol = RC_PROTO_NEC32; + } else if ((address ^ not_address) != 0xff) { + /* Extended NEC */ + scancode = address << 16 | + not_address << 8 | + command; + *protocol = RC_PROTO_NECX; + } else { + /* Normal NEC */ + scancode = address << 8 | command; + *protocol = RC_PROTO_NEC; + } + + return scancode; +} + +#endif /* _RC_CORE */ diff --git a/include/media/rc-map.h b/include/media/rc-map.h new file mode 100644 index 000000000..c3effcdf2 --- /dev/null +++ b/include/media/rc-map.h @@ -0,0 +1,347 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * rc-map.h - define RC map names used by RC drivers + * + * Copyright (c) 2010 by Mauro Carvalho Chehab + */ + +#ifndef _MEDIA_RC_MAP_H +#define _MEDIA_RC_MAP_H + +#include <linux/input.h> +#include <uapi/linux/lirc.h> + +#define RC_PROTO_BIT_NONE 0ULL +#define RC_PROTO_BIT_UNKNOWN BIT_ULL(RC_PROTO_UNKNOWN) +#define RC_PROTO_BIT_OTHER BIT_ULL(RC_PROTO_OTHER) +#define RC_PROTO_BIT_RC5 BIT_ULL(RC_PROTO_RC5) +#define RC_PROTO_BIT_RC5X_20 BIT_ULL(RC_PROTO_RC5X_20) +#define RC_PROTO_BIT_RC5_SZ BIT_ULL(RC_PROTO_RC5_SZ) +#define RC_PROTO_BIT_JVC BIT_ULL(RC_PROTO_JVC) +#define RC_PROTO_BIT_SONY12 BIT_ULL(RC_PROTO_SONY12) +#define RC_PROTO_BIT_SONY15 BIT_ULL(RC_PROTO_SONY15) +#define RC_PROTO_BIT_SONY20 BIT_ULL(RC_PROTO_SONY20) +#define RC_PROTO_BIT_NEC BIT_ULL(RC_PROTO_NEC) +#define RC_PROTO_BIT_NECX BIT_ULL(RC_PROTO_NECX) +#define RC_PROTO_BIT_NEC32 BIT_ULL(RC_PROTO_NEC32) +#define RC_PROTO_BIT_SANYO BIT_ULL(RC_PROTO_SANYO) +#define RC_PROTO_BIT_MCIR2_KBD BIT_ULL(RC_PROTO_MCIR2_KBD) +#define RC_PROTO_BIT_MCIR2_MSE BIT_ULL(RC_PROTO_MCIR2_MSE) +#define RC_PROTO_BIT_RC6_0 BIT_ULL(RC_PROTO_RC6_0) +#define RC_PROTO_BIT_RC6_6A_20 BIT_ULL(RC_PROTO_RC6_6A_20) +#define RC_PROTO_BIT_RC6_6A_24 BIT_ULL(RC_PROTO_RC6_6A_24) +#define RC_PROTO_BIT_RC6_6A_32 BIT_ULL(RC_PROTO_RC6_6A_32) +#define RC_PROTO_BIT_RC6_MCE BIT_ULL(RC_PROTO_RC6_MCE) +#define RC_PROTO_BIT_SHARP BIT_ULL(RC_PROTO_SHARP) +#define RC_PROTO_BIT_XMP BIT_ULL(RC_PROTO_XMP) +#define RC_PROTO_BIT_CEC BIT_ULL(RC_PROTO_CEC) +#define RC_PROTO_BIT_IMON BIT_ULL(RC_PROTO_IMON) +#define RC_PROTO_BIT_RCMM12 BIT_ULL(RC_PROTO_RCMM12) +#define RC_PROTO_BIT_RCMM24 BIT_ULL(RC_PROTO_RCMM24) +#define RC_PROTO_BIT_RCMM32 BIT_ULL(RC_PROTO_RCMM32) +#define RC_PROTO_BIT_XBOX_DVD BIT_ULL(RC_PROTO_XBOX_DVD) + +#if IS_ENABLED(CONFIG_IR_RC5_DECODER) +#define __RC_PROTO_RC5_CODEC \ + (RC_PROTO_BIT_RC5 | RC_PROTO_BIT_RC5X_20 | RC_PROTO_BIT_RC5_SZ) +#else +#define __RC_PROTO_RC5_CODEC 0 +#endif + +#if IS_ENABLED(CONFIG_IR_JVC_DECODER) +#define __RC_PROTO_JVC_CODEC RC_PROTO_BIT_JVC +#else +#define __RC_PROTO_JVC_CODEC 0 +#endif +#if IS_ENABLED(CONFIG_IR_SONY_DECODER) +#define __RC_PROTO_SONY_CODEC \ + (RC_PROTO_BIT_SONY12 | RC_PROTO_BIT_SONY15 | RC_PROTO_BIT_SONY20) +#else +#define __RC_PROTO_SONY_CODEC 0 +#endif +#if IS_ENABLED(CONFIG_IR_NEC_DECODER) +#define __RC_PROTO_NEC_CODEC \ + (RC_PROTO_BIT_NEC | RC_PROTO_BIT_NECX | RC_PROTO_BIT_NEC32) +#else +#define __RC_PROTO_NEC_CODEC 0 +#endif +#if IS_ENABLED(CONFIG_IR_SANYO_DECODER) +#define __RC_PROTO_SANYO_CODEC RC_PROTO_BIT_SANYO +#else +#define __RC_PROTO_SANYO_CODEC 0 +#endif +#if IS_ENABLED(CONFIG_IR_MCE_KBD_DECODER) +#define __RC_PROTO_MCE_KBD_CODEC \ + (RC_PROTO_BIT_MCIR2_KBD | RC_PROTO_BIT_MCIR2_MSE) +#else +#define __RC_PROTO_MCE_KBD_CODEC 0 +#endif +#if IS_ENABLED(CONFIG_IR_RC6_DECODER) +#define __RC_PROTO_RC6_CODEC \ + (RC_PROTO_BIT_RC6_0 | RC_PROTO_BIT_RC6_6A_20 | \ + RC_PROTO_BIT_RC6_6A_24 | RC_PROTO_BIT_RC6_6A_32 | \ + RC_PROTO_BIT_RC6_MCE) +#else +#define __RC_PROTO_RC6_CODEC 0 +#endif +#if IS_ENABLED(CONFIG_IR_SHARP_DECODER) +#define __RC_PROTO_SHARP_CODEC RC_PROTO_BIT_SHARP +#else +#define __RC_PROTO_SHARP_CODEC 0 +#endif +#if IS_ENABLED(CONFIG_IR_XMP_DECODER) +#define __RC_PROTO_XMP_CODEC RC_PROTO_BIT_XMP +#else +#define __RC_PROTO_XMP_CODEC 0 +#endif +#if IS_ENABLED(CONFIG_IR_IMON_DECODER) +#define __RC_PROTO_IMON_CODEC RC_PROTO_BIT_IMON +#else +#define __RC_PROTO_IMON_CODEC 0 +#endif +#if IS_ENABLED(CONFIG_IR_RCMM_DECODER) +#define __RC_PROTO_RCMM_CODEC \ + (RC_PROTO_BIT_RCMM12 | RC_PROTO_BIT_RCMM24 | RC_PROTO_BIT_RCMM32) +#else +#define __RC_PROTO_RCMM_CODEC 0 +#endif + +/* All kernel-based codecs have encoders and decoders */ +#define RC_PROTO_BIT_ALL_IR_DECODER \ + (__RC_PROTO_RC5_CODEC | __RC_PROTO_JVC_CODEC | __RC_PROTO_SONY_CODEC | \ + __RC_PROTO_NEC_CODEC | __RC_PROTO_SANYO_CODEC | \ + __RC_PROTO_MCE_KBD_CODEC | __RC_PROTO_RC6_CODEC | \ + __RC_PROTO_SHARP_CODEC | __RC_PROTO_XMP_CODEC | \ + __RC_PROTO_IMON_CODEC | __RC_PROTO_RCMM_CODEC) + +#define RC_PROTO_BIT_ALL_IR_ENCODER \ + (__RC_PROTO_RC5_CODEC | __RC_PROTO_JVC_CODEC | __RC_PROTO_SONY_CODEC | \ + __RC_PROTO_NEC_CODEC | __RC_PROTO_SANYO_CODEC | \ + __RC_PROTO_MCE_KBD_CODEC | __RC_PROTO_RC6_CODEC | \ + __RC_PROTO_SHARP_CODEC | __RC_PROTO_XMP_CODEC | \ + __RC_PROTO_IMON_CODEC | __RC_PROTO_RCMM_CODEC) + +#define RC_SCANCODE_UNKNOWN(x) (x) +#define RC_SCANCODE_OTHER(x) (x) +#define RC_SCANCODE_NEC(addr, cmd) (((addr) << 8) | (cmd)) +#define RC_SCANCODE_NECX(addr, cmd) (((addr) << 8) | (cmd)) +#define RC_SCANCODE_NEC32(data) ((data) & 0xffffffff) +#define RC_SCANCODE_RC5(sys, cmd) (((sys) << 8) | (cmd)) +#define RC_SCANCODE_RC5_SZ(sys, cmd) (((sys) << 8) | (cmd)) +#define RC_SCANCODE_RC6_0(sys, cmd) (((sys) << 8) | (cmd)) +#define RC_SCANCODE_RC6_6A(vendor, sys, cmd) (((vendor) << 16) | ((sys) << 8) | (cmd)) + +/** + * struct rc_map_table - represents a scancode/keycode pair + * + * @scancode: scan code (u64) + * @keycode: Linux input keycode + */ +struct rc_map_table { + u64 scancode; + u32 keycode; +}; + +/** + * struct rc_map - represents a keycode map table + * + * @scan: pointer to struct &rc_map_table + * @size: Max number of entries + * @len: Number of entries that are in use + * @alloc: size of \*scan, in bytes + * @rc_proto: type of the remote controller protocol, as defined at + * enum &rc_proto + * @name: name of the key map table + * @lock: lock to protect access to this structure + */ +struct rc_map { + struct rc_map_table *scan; + unsigned int size; + unsigned int len; + unsigned int alloc; + enum rc_proto rc_proto; + const char *name; + spinlock_t lock; +}; + +/** + * struct rc_map_list - list of the registered &rc_map maps + * + * @list: pointer to struct &list_head + * @map: pointer to struct &rc_map + */ +struct rc_map_list { + struct list_head list; + struct rc_map map; +}; + +#ifdef CONFIG_MEDIA_CEC_RC +/* + * rc_map_list from rc-cec.c + */ +extern struct rc_map_list cec_map; +#endif + +/* Routines from rc-map.c */ + +/** + * rc_map_register() - Registers a Remote Controller scancode map + * + * @map: pointer to struct rc_map_list + */ +int rc_map_register(struct rc_map_list *map); + +/** + * rc_map_unregister() - Unregisters a Remote Controller scancode map + * + * @map: pointer to struct rc_map_list + */ +void rc_map_unregister(struct rc_map_list *map); + +/** + * rc_map_get - gets an RC map from its name + * @name: name of the RC scancode map + */ +struct rc_map *rc_map_get(const char *name); + +/* Names of the several keytables defined in-kernel */ + +#define RC_MAP_ADSTECH_DVB_T_PCI "rc-adstech-dvb-t-pci" +#define RC_MAP_ALINK_DTU_M "rc-alink-dtu-m" +#define RC_MAP_ANYSEE "rc-anysee" +#define RC_MAP_APAC_VIEWCOMP "rc-apac-viewcomp" +#define RC_MAP_ASTROMETA_T2HYBRID "rc-astrometa-t2hybrid" +#define RC_MAP_ASUS_PC39 "rc-asus-pc39" +#define RC_MAP_ASUS_PS3_100 "rc-asus-ps3-100" +#define RC_MAP_ATI_TV_WONDER_HD_600 "rc-ati-tv-wonder-hd-600" +#define RC_MAP_ATI_X10 "rc-ati-x10" +#define RC_MAP_AVERMEDIA "rc-avermedia" +#define RC_MAP_AVERMEDIA_A16D "rc-avermedia-a16d" +#define RC_MAP_AVERMEDIA_CARDBUS "rc-avermedia-cardbus" +#define RC_MAP_AVERMEDIA_DVBT "rc-avermedia-dvbt" +#define RC_MAP_AVERMEDIA_M135A "rc-avermedia-m135a" +#define RC_MAP_AVERMEDIA_M733A_RM_K6 "rc-avermedia-m733a-rm-k6" +#define RC_MAP_AVERMEDIA_RM_KS "rc-avermedia-rm-ks" +#define RC_MAP_AVERTV_303 "rc-avertv-303" +#define RC_MAP_AZUREWAVE_AD_TU700 "rc-azurewave-ad-tu700" +#define RC_MAP_BEELINK_GS1 "rc-beelink-gs1" +#define RC_MAP_BEHOLD "rc-behold" +#define RC_MAP_BEHOLD_COLUMBUS "rc-behold-columbus" +#define RC_MAP_BUDGET_CI_OLD "rc-budget-ci-old" +#define RC_MAP_CEC "rc-cec" +#define RC_MAP_CINERGY "rc-cinergy" +#define RC_MAP_CINERGY_1400 "rc-cinergy-1400" +#define RC_MAP_D680_DMB "rc-d680-dmb" +#define RC_MAP_DELOCK_61959 "rc-delock-61959" +#define RC_MAP_DIB0700_NEC_TABLE "rc-dib0700-nec" +#define RC_MAP_DIB0700_RC5_TABLE "rc-dib0700-rc5" +#define RC_MAP_DIGITALNOW_TINYTWIN "rc-digitalnow-tinytwin" +#define RC_MAP_DIGITTRADE "rc-digittrade" +#define RC_MAP_DM1105_NEC "rc-dm1105-nec" +#define RC_MAP_DNTV_LIVE_DVB_T "rc-dntv-live-dvb-t" +#define RC_MAP_DNTV_LIVE_DVBT_PRO "rc-dntv-live-dvbt-pro" +#define RC_MAP_DTT200U "rc-dtt200u" +#define RC_MAP_DVBSKY "rc-dvbsky" +#define RC_MAP_DVICO_MCE "rc-dvico-mce" +#define RC_MAP_DVICO_PORTABLE "rc-dvico-portable" +#define RC_MAP_EMPTY "rc-empty" +#define RC_MAP_EM_TERRATEC "rc-em-terratec" +#define RC_MAP_ENCORE_ENLTV "rc-encore-enltv" +#define RC_MAP_ENCORE_ENLTV2 "rc-encore-enltv2" +#define RC_MAP_ENCORE_ENLTV_FM53 "rc-encore-enltv-fm53" +#define RC_MAP_EVGA_INDTUBE "rc-evga-indtube" +#define RC_MAP_EZTV "rc-eztv" +#define RC_MAP_FLYDVB "rc-flydvb" +#define RC_MAP_FLYVIDEO "rc-flyvideo" +#define RC_MAP_FUSIONHDTV_MCE "rc-fusionhdtv-mce" +#define RC_MAP_GADMEI_RM008Z "rc-gadmei-rm008z" +#define RC_MAP_GEEKBOX "rc-geekbox" +#define RC_MAP_GENIUS_TVGO_A11MCE "rc-genius-tvgo-a11mce" +#define RC_MAP_GOTVIEW7135 "rc-gotview7135" +#define RC_MAP_HAUPPAUGE "rc-hauppauge" +#define RC_MAP_HAUPPAUGE_NEW "rc-hauppauge" +#define RC_MAP_HISI_POPLAR "rc-hisi-poplar" +#define RC_MAP_HISI_TV_DEMO "rc-hisi-tv-demo" +#define RC_MAP_IMON_MCE "rc-imon-mce" +#define RC_MAP_IMON_PAD "rc-imon-pad" +#define RC_MAP_IMON_RSC "rc-imon-rsc" +#define RC_MAP_IODATA_BCTV7E "rc-iodata-bctv7e" +#define RC_MAP_IT913X_V1 "rc-it913x-v1" +#define RC_MAP_IT913X_V2 "rc-it913x-v2" +#define RC_MAP_KAIOMY "rc-kaiomy" +#define RC_MAP_KHADAS "rc-khadas" +#define RC_MAP_KWORLD_315U "rc-kworld-315u" +#define RC_MAP_KWORLD_PC150U "rc-kworld-pc150u" +#define RC_MAP_KWORLD_PLUS_TV_ANALOG "rc-kworld-plus-tv-analog" +#define RC_MAP_LEADTEK_Y04G0051 "rc-leadtek-y04g0051" +#define RC_MAP_LME2510 "rc-lme2510" +#define RC_MAP_MANLI "rc-manli" +#define RC_MAP_MEDION_X10 "rc-medion-x10" +#define RC_MAP_MEDION_X10_DIGITAINER "rc-medion-x10-digitainer" +#define RC_MAP_MEDION_X10_OR2X "rc-medion-x10-or2x" +#define RC_MAP_MSI_DIGIVOX_II "rc-msi-digivox-ii" +#define RC_MAP_MSI_DIGIVOX_III "rc-msi-digivox-iii" +#define RC_MAP_MSI_TVANYWHERE "rc-msi-tvanywhere" +#define RC_MAP_MSI_TVANYWHERE_PLUS "rc-msi-tvanywhere-plus" +#define RC_MAP_NEBULA "rc-nebula" +#define RC_MAP_NEC_TERRATEC_CINERGY_XS "rc-nec-terratec-cinergy-xs" +#define RC_MAP_NORWOOD "rc-norwood" +#define RC_MAP_NPGTECH "rc-npgtech" +#define RC_MAP_ODROID "rc-odroid" +#define RC_MAP_PCTV_SEDNA "rc-pctv-sedna" +#define RC_MAP_PINNACLE_COLOR "rc-pinnacle-color" +#define RC_MAP_PINNACLE_GREY "rc-pinnacle-grey" +#define RC_MAP_PINNACLE_PCTV_HD "rc-pinnacle-pctv-hd" +#define RC_MAP_PIXELVIEW "rc-pixelview" +#define RC_MAP_PIXELVIEW_002T "rc-pixelview-002t" +#define RC_MAP_PIXELVIEW_MK12 "rc-pixelview-mk12" +#define RC_MAP_PIXELVIEW_NEW "rc-pixelview-new" +#define RC_MAP_POWERCOLOR_REAL_ANGEL "rc-powercolor-real-angel" +#define RC_MAP_PROTEUS_2309 "rc-proteus-2309" +#define RC_MAP_PURPLETV "rc-purpletv" +#define RC_MAP_PV951 "rc-pv951" +#define RC_MAP_RC5_TV "rc-rc5-tv" +#define RC_MAP_RC6_MCE "rc-rc6-mce" +#define RC_MAP_REAL_AUDIO_220_32_KEYS "rc-real-audio-220-32-keys" +#define RC_MAP_REDDO "rc-reddo" +#define RC_MAP_SNAPSTREAM_FIREFLY "rc-snapstream-firefly" +#define RC_MAP_STREAMZAP "rc-streamzap" +#define RC_MAP_SU3000 "rc-su3000" +#define RC_MAP_TANGO "rc-tango" +#define RC_MAP_TANIX_TX3MINI "rc-tanix-tx3mini" +#define RC_MAP_TANIX_TX5MAX "rc-tanix-tx5max" +#define RC_MAP_TBS_NEC "rc-tbs-nec" +#define RC_MAP_TECHNISAT_TS35 "rc-technisat-ts35" +#define RC_MAP_TECHNISAT_USB2 "rc-technisat-usb2" +#define RC_MAP_TERRATEC_CINERGY_C_PCI "rc-terratec-cinergy-c-pci" +#define RC_MAP_TERRATEC_CINERGY_S2_HD "rc-terratec-cinergy-s2-hd" +#define RC_MAP_TERRATEC_CINERGY_XS "rc-terratec-cinergy-xs" +#define RC_MAP_TERRATEC_SLIM "rc-terratec-slim" +#define RC_MAP_TERRATEC_SLIM_2 "rc-terratec-slim-2" +#define RC_MAP_TEVII_NEC "rc-tevii-nec" +#define RC_MAP_TIVO "rc-tivo" +#define RC_MAP_TOTAL_MEDIA_IN_HAND "rc-total-media-in-hand" +#define RC_MAP_TOTAL_MEDIA_IN_HAND_02 "rc-total-media-in-hand-02" +#define RC_MAP_TREKSTOR "rc-trekstor" +#define RC_MAP_TT_1500 "rc-tt-1500" +#define RC_MAP_TWINHAN_DTV_CAB_CI "rc-twinhan-dtv-cab-ci" +#define RC_MAP_TWINHAN_VP1027_DVBS "rc-twinhan1027" +#define RC_MAP_VEGA_S9X "rc-vega-s9x" +#define RC_MAP_VIDEOMATE_K100 "rc-videomate-k100" +#define RC_MAP_VIDEOMATE_S350 "rc-videomate-s350" +#define RC_MAP_VIDEOMATE_TV_PVR "rc-videomate-tv-pvr" +#define RC_MAP_KII_PRO "rc-videostrong-kii-pro" +#define RC_MAP_WETEK_HUB "rc-wetek-hub" +#define RC_MAP_WETEK_PLAY2 "rc-wetek-play2" +#define RC_MAP_WINFAST "rc-winfast" +#define RC_MAP_WINFAST_USBII_DELUXE "rc-winfast-usbii-deluxe" +#define RC_MAP_X96MAX "rc-x96max" +#define RC_MAP_XBOX_DVD "rc-xbox-dvd" +#define RC_MAP_ZX_IRDEC "rc-zx-irdec" + +/* + * Please, do not just append newer Remote Controller names at the end. + * The names should be ordered in alphabetical order + */ + +#endif /* _MEDIA_RC_MAP_H */ diff --git a/include/media/rcar-fcp.h b/include/media/rcar-fcp.h new file mode 100644 index 000000000..179240fb1 --- /dev/null +++ b/include/media/rcar-fcp.h @@ -0,0 +1,38 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * rcar-fcp.h -- R-Car Frame Compression Processor Driver + * + * Copyright (C) 2016 Renesas Electronics Corporation + * + * Contact: Laurent Pinchart (laurent.pinchart@ideasonboard.com) + */ +#ifndef __MEDIA_RCAR_FCP_H__ +#define __MEDIA_RCAR_FCP_H__ + +struct device_node; +struct rcar_fcp_device; + +#if IS_ENABLED(CONFIG_VIDEO_RENESAS_FCP) +struct rcar_fcp_device *rcar_fcp_get(const struct device_node *np); +void rcar_fcp_put(struct rcar_fcp_device *fcp); +struct device *rcar_fcp_get_device(struct rcar_fcp_device *fcp); +int rcar_fcp_enable(struct rcar_fcp_device *fcp); +void rcar_fcp_disable(struct rcar_fcp_device *fcp); +#else +static inline struct rcar_fcp_device *rcar_fcp_get(const struct device_node *np) +{ + return ERR_PTR(-ENOENT); +} +static inline void rcar_fcp_put(struct rcar_fcp_device *fcp) { } +static inline struct device *rcar_fcp_get_device(struct rcar_fcp_device *fcp) +{ + return NULL; +} +static inline int rcar_fcp_enable(struct rcar_fcp_device *fcp) +{ + return 0; +} +static inline void rcar_fcp_disable(struct rcar_fcp_device *fcp) { } +#endif + +#endif /* __MEDIA_RCAR_FCP_H__ */ diff --git a/include/media/tpg/v4l2-tpg.h b/include/media/tpg/v4l2-tpg.h new file mode 100644 index 000000000..181dcbe77 --- /dev/null +++ b/include/media/tpg/v4l2-tpg.h @@ -0,0 +1,652 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * v4l2-tpg.h - Test Pattern Generator + * + * Copyright 2014 Cisco Systems, Inc. and/or its affiliates. All rights reserved. + */ + +#ifndef _V4L2_TPG_H_ +#define _V4L2_TPG_H_ + +#include <linux/types.h> +#include <linux/errno.h> +#include <linux/random.h> +#include <linux/slab.h> +#include <linux/vmalloc.h> +#include <linux/videodev2.h> + +struct tpg_rbg_color8 { + unsigned char r, g, b; +}; + +struct tpg_rbg_color16 { + __u16 r, g, b; +}; + +enum tpg_color { + TPG_COLOR_CSC_WHITE, + TPG_COLOR_CSC_YELLOW, + TPG_COLOR_CSC_CYAN, + TPG_COLOR_CSC_GREEN, + TPG_COLOR_CSC_MAGENTA, + TPG_COLOR_CSC_RED, + TPG_COLOR_CSC_BLUE, + TPG_COLOR_CSC_BLACK, + TPG_COLOR_75_YELLOW, + TPG_COLOR_75_CYAN, + TPG_COLOR_75_GREEN, + TPG_COLOR_75_MAGENTA, + TPG_COLOR_75_RED, + TPG_COLOR_75_BLUE, + TPG_COLOR_100_WHITE, + TPG_COLOR_100_YELLOW, + TPG_COLOR_100_CYAN, + TPG_COLOR_100_GREEN, + TPG_COLOR_100_MAGENTA, + TPG_COLOR_100_RED, + TPG_COLOR_100_BLUE, + TPG_COLOR_100_BLACK, + TPG_COLOR_TEXTFG, + TPG_COLOR_TEXTBG, + TPG_COLOR_RANDOM, + TPG_COLOR_RAMP, + TPG_COLOR_MAX = TPG_COLOR_RAMP + 256 +}; + +extern const struct tpg_rbg_color8 tpg_colors[TPG_COLOR_MAX]; +extern const unsigned short tpg_rec709_to_linear[255 * 16 + 1]; +extern const unsigned short tpg_linear_to_rec709[255 * 16 + 1]; +extern const struct tpg_rbg_color16 tpg_csc_colors[V4L2_COLORSPACE_DCI_P3 + 1] + [V4L2_XFER_FUNC_SMPTE2084 + 1] + [TPG_COLOR_CSC_BLACK + 1]; +enum tpg_pattern { + TPG_PAT_75_COLORBAR, + TPG_PAT_100_COLORBAR, + TPG_PAT_CSC_COLORBAR, + TPG_PAT_100_HCOLORBAR, + TPG_PAT_100_COLORSQUARES, + TPG_PAT_BLACK, + TPG_PAT_WHITE, + TPG_PAT_RED, + TPG_PAT_GREEN, + TPG_PAT_BLUE, + TPG_PAT_CHECKERS_16X16, + TPG_PAT_CHECKERS_2X2, + TPG_PAT_CHECKERS_1X1, + TPG_PAT_COLOR_CHECKERS_2X2, + TPG_PAT_COLOR_CHECKERS_1X1, + TPG_PAT_ALTERNATING_HLINES, + TPG_PAT_ALTERNATING_VLINES, + TPG_PAT_CROSS_1_PIXEL, + TPG_PAT_CROSS_2_PIXELS, + TPG_PAT_CROSS_10_PIXELS, + TPG_PAT_GRAY_RAMP, + + /* Must be the last pattern */ + TPG_PAT_NOISE, +}; + +extern const char * const tpg_pattern_strings[]; + +enum tpg_quality { + TPG_QUAL_COLOR, + TPG_QUAL_GRAY, + TPG_QUAL_NOISE +}; + +enum tpg_video_aspect { + TPG_VIDEO_ASPECT_IMAGE, + TPG_VIDEO_ASPECT_4X3, + TPG_VIDEO_ASPECT_14X9_CENTRE, + TPG_VIDEO_ASPECT_16X9_CENTRE, + TPG_VIDEO_ASPECT_16X9_ANAMORPHIC, +}; + +enum tpg_pixel_aspect { + TPG_PIXEL_ASPECT_SQUARE, + TPG_PIXEL_ASPECT_NTSC, + TPG_PIXEL_ASPECT_PAL, +}; + +enum tpg_move_mode { + TPG_MOVE_NEG_FAST, + TPG_MOVE_NEG, + TPG_MOVE_NEG_SLOW, + TPG_MOVE_NONE, + TPG_MOVE_POS_SLOW, + TPG_MOVE_POS, + TPG_MOVE_POS_FAST, +}; + +enum tgp_color_enc { + TGP_COLOR_ENC_RGB, + TGP_COLOR_ENC_YCBCR, + TGP_COLOR_ENC_HSV, + TGP_COLOR_ENC_LUMA, +}; + +extern const char * const tpg_aspect_strings[]; + +#define TPG_MAX_PLANES 3 +#define TPG_MAX_PAT_LINES 8 + +struct tpg_data { + /* Source frame size */ + unsigned src_width, src_height; + /* Buffer height */ + unsigned buf_height; + /* Scaled output frame size */ + unsigned scaled_width; + u32 field; + bool field_alternate; + /* crop coordinates are frame-based */ + struct v4l2_rect crop; + /* compose coordinates are format-based */ + struct v4l2_rect compose; + /* border and square coordinates are frame-based */ + struct v4l2_rect border; + struct v4l2_rect square; + + /* Color-related fields */ + enum tpg_quality qual; + unsigned qual_offset; + u8 alpha_component; + bool alpha_red_only; + u8 brightness; + u8 contrast; + u8 saturation; + s16 hue; + u32 fourcc; + enum tgp_color_enc color_enc; + u32 colorspace; + u32 xfer_func; + u32 ycbcr_enc; + u32 hsv_enc; + /* + * Stores the actual transfer function, i.e. will never be + * V4L2_XFER_FUNC_DEFAULT. + */ + u32 real_xfer_func; + /* + * Stores the actual Y'CbCr encoding, i.e. will never be + * V4L2_YCBCR_ENC_DEFAULT. + */ + u32 real_hsv_enc; + u32 real_ycbcr_enc; + u32 quantization; + /* + * Stores the actual quantization, i.e. will never be + * V4L2_QUANTIZATION_DEFAULT. + */ + u32 real_quantization; + enum tpg_video_aspect vid_aspect; + enum tpg_pixel_aspect pix_aspect; + unsigned rgb_range; + unsigned real_rgb_range; + unsigned buffers; + unsigned planes; + bool interleaved; + u8 vdownsampling[TPG_MAX_PLANES]; + u8 hdownsampling[TPG_MAX_PLANES]; + /* + * horizontal positions must be ANDed with this value to enforce + * correct boundaries for packed YUYV values. + */ + unsigned hmask[TPG_MAX_PLANES]; + /* Used to store the colors in native format, either RGB or YUV */ + u8 colors[TPG_COLOR_MAX][3]; + u8 textfg[TPG_MAX_PLANES][8], textbg[TPG_MAX_PLANES][8]; + /* size in bytes for two pixels in each plane */ + unsigned twopixelsize[TPG_MAX_PLANES]; + unsigned bytesperline[TPG_MAX_PLANES]; + + /* Configuration */ + enum tpg_pattern pattern; + bool hflip; + bool vflip; + unsigned perc_fill; + bool perc_fill_blank; + bool show_border; + bool show_square; + bool insert_sav; + bool insert_eav; + + /* Test pattern movement */ + enum tpg_move_mode mv_hor_mode; + int mv_hor_count; + int mv_hor_step; + enum tpg_move_mode mv_vert_mode; + int mv_vert_count; + int mv_vert_step; + + bool recalc_colors; + bool recalc_lines; + bool recalc_square_border; + + /* Used to store TPG_MAX_PAT_LINES lines, each with up to two planes */ + unsigned max_line_width; + u8 *lines[TPG_MAX_PAT_LINES][TPG_MAX_PLANES]; + u8 *downsampled_lines[TPG_MAX_PAT_LINES][TPG_MAX_PLANES]; + u8 *random_line[TPG_MAX_PLANES]; + u8 *contrast_line[TPG_MAX_PLANES]; + u8 *black_line[TPG_MAX_PLANES]; +}; + +void tpg_init(struct tpg_data *tpg, unsigned w, unsigned h); +int tpg_alloc(struct tpg_data *tpg, unsigned max_w); +void tpg_free(struct tpg_data *tpg); +void tpg_reset_source(struct tpg_data *tpg, unsigned width, unsigned height, + u32 field); +void tpg_log_status(struct tpg_data *tpg); + +void tpg_set_font(const u8 *f); +void tpg_gen_text(const struct tpg_data *tpg, + u8 *basep[TPG_MAX_PLANES][2], int y, int x, const char *text); +void tpg_calc_text_basep(struct tpg_data *tpg, + u8 *basep[TPG_MAX_PLANES][2], unsigned p, u8 *vbuf); +unsigned tpg_g_interleaved_plane(const struct tpg_data *tpg, unsigned buf_line); +void tpg_fill_plane_buffer(struct tpg_data *tpg, v4l2_std_id std, + unsigned p, u8 *vbuf); +void tpg_fillbuffer(struct tpg_data *tpg, v4l2_std_id std, + unsigned p, u8 *vbuf); +bool tpg_s_fourcc(struct tpg_data *tpg, u32 fourcc); +void tpg_s_crop_compose(struct tpg_data *tpg, const struct v4l2_rect *crop, + const struct v4l2_rect *compose); +const char *tpg_g_color_order(const struct tpg_data *tpg); + +static inline void tpg_s_pattern(struct tpg_data *tpg, enum tpg_pattern pattern) +{ + if (tpg->pattern == pattern) + return; + tpg->pattern = pattern; + tpg->recalc_colors = true; +} + +static inline void tpg_s_quality(struct tpg_data *tpg, + enum tpg_quality qual, unsigned qual_offset) +{ + if (tpg->qual == qual && tpg->qual_offset == qual_offset) + return; + tpg->qual = qual; + tpg->qual_offset = qual_offset; + tpg->recalc_colors = true; +} + +static inline enum tpg_quality tpg_g_quality(const struct tpg_data *tpg) +{ + return tpg->qual; +} + +static inline void tpg_s_alpha_component(struct tpg_data *tpg, + u8 alpha_component) +{ + if (tpg->alpha_component == alpha_component) + return; + tpg->alpha_component = alpha_component; + tpg->recalc_colors = true; +} + +static inline void tpg_s_alpha_mode(struct tpg_data *tpg, + bool red_only) +{ + if (tpg->alpha_red_only == red_only) + return; + tpg->alpha_red_only = red_only; + tpg->recalc_colors = true; +} + +static inline void tpg_s_brightness(struct tpg_data *tpg, + u8 brightness) +{ + if (tpg->brightness == brightness) + return; + tpg->brightness = brightness; + tpg->recalc_colors = true; +} + +static inline void tpg_s_contrast(struct tpg_data *tpg, + u8 contrast) +{ + if (tpg->contrast == contrast) + return; + tpg->contrast = contrast; + tpg->recalc_colors = true; +} + +static inline void tpg_s_saturation(struct tpg_data *tpg, + u8 saturation) +{ + if (tpg->saturation == saturation) + return; + tpg->saturation = saturation; + tpg->recalc_colors = true; +} + +static inline void tpg_s_hue(struct tpg_data *tpg, + s16 hue) +{ + hue = clamp_t(s16, hue, -128, 128); + if (tpg->hue == hue) + return; + tpg->hue = hue; + tpg->recalc_colors = true; +} + +static inline void tpg_s_rgb_range(struct tpg_data *tpg, + unsigned rgb_range) +{ + if (tpg->rgb_range == rgb_range) + return; + tpg->rgb_range = rgb_range; + tpg->recalc_colors = true; +} + +static inline void tpg_s_real_rgb_range(struct tpg_data *tpg, + unsigned rgb_range) +{ + if (tpg->real_rgb_range == rgb_range) + return; + tpg->real_rgb_range = rgb_range; + tpg->recalc_colors = true; +} + +static inline void tpg_s_colorspace(struct tpg_data *tpg, u32 colorspace) +{ + if (tpg->colorspace == colorspace) + return; + tpg->colorspace = colorspace; + tpg->recalc_colors = true; +} + +static inline u32 tpg_g_colorspace(const struct tpg_data *tpg) +{ + return tpg->colorspace; +} + +static inline void tpg_s_ycbcr_enc(struct tpg_data *tpg, u32 ycbcr_enc) +{ + if (tpg->ycbcr_enc == ycbcr_enc) + return; + tpg->ycbcr_enc = ycbcr_enc; + tpg->recalc_colors = true; +} + +static inline u32 tpg_g_ycbcr_enc(const struct tpg_data *tpg) +{ + return tpg->ycbcr_enc; +} + +static inline void tpg_s_hsv_enc(struct tpg_data *tpg, u32 hsv_enc) +{ + if (tpg->hsv_enc == hsv_enc) + return; + tpg->hsv_enc = hsv_enc; + tpg->recalc_colors = true; +} + +static inline u32 tpg_g_hsv_enc(const struct tpg_data *tpg) +{ + return tpg->hsv_enc; +} + +static inline void tpg_s_xfer_func(struct tpg_data *tpg, u32 xfer_func) +{ + if (tpg->xfer_func == xfer_func) + return; + tpg->xfer_func = xfer_func; + tpg->recalc_colors = true; +} + +static inline u32 tpg_g_xfer_func(const struct tpg_data *tpg) +{ + return tpg->xfer_func; +} + +static inline void tpg_s_quantization(struct tpg_data *tpg, u32 quantization) +{ + if (tpg->quantization == quantization) + return; + tpg->quantization = quantization; + tpg->recalc_colors = true; +} + +static inline u32 tpg_g_quantization(const struct tpg_data *tpg) +{ + return tpg->quantization; +} + +static inline unsigned tpg_g_buffers(const struct tpg_data *tpg) +{ + return tpg->buffers; +} + +static inline unsigned tpg_g_planes(const struct tpg_data *tpg) +{ + return tpg->interleaved ? 1 : tpg->planes; +} + +static inline bool tpg_g_interleaved(const struct tpg_data *tpg) +{ + return tpg->interleaved; +} + +static inline unsigned tpg_g_twopixelsize(const struct tpg_data *tpg, unsigned plane) +{ + return tpg->twopixelsize[plane]; +} + +static inline unsigned tpg_hdiv(const struct tpg_data *tpg, + unsigned plane, unsigned x) +{ + return ((x / tpg->hdownsampling[plane]) & tpg->hmask[plane]) * + tpg->twopixelsize[plane] / 2; +} + +static inline unsigned tpg_hscale(const struct tpg_data *tpg, unsigned x) +{ + return (x * tpg->scaled_width) / tpg->src_width; +} + +static inline unsigned tpg_hscale_div(const struct tpg_data *tpg, + unsigned plane, unsigned x) +{ + return tpg_hdiv(tpg, plane, tpg_hscale(tpg, x)); +} + +static inline unsigned tpg_g_bytesperline(const struct tpg_data *tpg, unsigned plane) +{ + return tpg->bytesperline[plane]; +} + +static inline void tpg_s_bytesperline(struct tpg_data *tpg, unsigned plane, unsigned bpl) +{ + unsigned p; + + if (tpg->buffers > 1) { + tpg->bytesperline[plane] = bpl; + return; + } + + for (p = 0; p < tpg_g_planes(tpg); p++) { + unsigned plane_w = bpl * tpg->twopixelsize[p] / tpg->twopixelsize[0]; + + tpg->bytesperline[p] = plane_w / tpg->hdownsampling[p]; + } + if (tpg_g_interleaved(tpg)) + tpg->bytesperline[1] = tpg->bytesperline[0]; +} + + +static inline unsigned tpg_g_line_width(const struct tpg_data *tpg, unsigned plane) +{ + unsigned w = 0; + unsigned p; + + if (tpg->buffers > 1) + return tpg_g_bytesperline(tpg, plane); + for (p = 0; p < tpg_g_planes(tpg); p++) { + unsigned plane_w = tpg_g_bytesperline(tpg, p); + + w += plane_w / tpg->vdownsampling[p]; + } + return w; +} + +static inline unsigned tpg_calc_line_width(const struct tpg_data *tpg, + unsigned plane, unsigned bpl) +{ + unsigned w = 0; + unsigned p; + + if (tpg->buffers > 1) + return bpl; + for (p = 0; p < tpg_g_planes(tpg); p++) { + unsigned plane_w = bpl * tpg->twopixelsize[p] / tpg->twopixelsize[0]; + + plane_w /= tpg->hdownsampling[p]; + w += plane_w / tpg->vdownsampling[p]; + } + return w; +} + +static inline unsigned tpg_calc_plane_size(const struct tpg_data *tpg, unsigned plane) +{ + if (plane >= tpg_g_planes(tpg)) + return 0; + + return tpg_g_bytesperline(tpg, plane) * tpg->buf_height / + tpg->vdownsampling[plane]; +} + +static inline void tpg_s_buf_height(struct tpg_data *tpg, unsigned h) +{ + tpg->buf_height = h; +} + +static inline void tpg_s_field(struct tpg_data *tpg, unsigned field, bool alternate) +{ + tpg->field = field; + tpg->field_alternate = alternate; +} + +static inline void tpg_s_perc_fill(struct tpg_data *tpg, + unsigned perc_fill) +{ + tpg->perc_fill = perc_fill; +} + +static inline unsigned tpg_g_perc_fill(const struct tpg_data *tpg) +{ + return tpg->perc_fill; +} + +static inline void tpg_s_perc_fill_blank(struct tpg_data *tpg, + bool perc_fill_blank) +{ + tpg->perc_fill_blank = perc_fill_blank; +} + +static inline void tpg_s_video_aspect(struct tpg_data *tpg, + enum tpg_video_aspect vid_aspect) +{ + if (tpg->vid_aspect == vid_aspect) + return; + tpg->vid_aspect = vid_aspect; + tpg->recalc_square_border = true; +} + +static inline enum tpg_video_aspect tpg_g_video_aspect(const struct tpg_data *tpg) +{ + return tpg->vid_aspect; +} + +static inline void tpg_s_pixel_aspect(struct tpg_data *tpg, + enum tpg_pixel_aspect pix_aspect) +{ + if (tpg->pix_aspect == pix_aspect) + return; + tpg->pix_aspect = pix_aspect; + tpg->recalc_square_border = true; +} + +static inline void tpg_s_show_border(struct tpg_data *tpg, + bool show_border) +{ + tpg->show_border = show_border; +} + +static inline void tpg_s_show_square(struct tpg_data *tpg, + bool show_square) +{ + tpg->show_square = show_square; +} + +static inline void tpg_s_insert_sav(struct tpg_data *tpg, bool insert_sav) +{ + tpg->insert_sav = insert_sav; +} + +static inline void tpg_s_insert_eav(struct tpg_data *tpg, bool insert_eav) +{ + tpg->insert_eav = insert_eav; +} + +void tpg_update_mv_step(struct tpg_data *tpg); + +static inline void tpg_s_mv_hor_mode(struct tpg_data *tpg, + enum tpg_move_mode mv_hor_mode) +{ + tpg->mv_hor_mode = mv_hor_mode; + tpg_update_mv_step(tpg); +} + +static inline void tpg_s_mv_vert_mode(struct tpg_data *tpg, + enum tpg_move_mode mv_vert_mode) +{ + tpg->mv_vert_mode = mv_vert_mode; + tpg_update_mv_step(tpg); +} + +static inline void tpg_init_mv_count(struct tpg_data *tpg) +{ + tpg->mv_hor_count = tpg->mv_vert_count = 0; +} + +static inline void tpg_update_mv_count(struct tpg_data *tpg, bool frame_is_field) +{ + tpg->mv_hor_count += tpg->mv_hor_step * (frame_is_field ? 1 : 2); + tpg->mv_vert_count += tpg->mv_vert_step * (frame_is_field ? 1 : 2); +} + +static inline void tpg_s_hflip(struct tpg_data *tpg, bool hflip) +{ + if (tpg->hflip == hflip) + return; + tpg->hflip = hflip; + tpg_update_mv_step(tpg); + tpg->recalc_lines = true; +} + +static inline bool tpg_g_hflip(const struct tpg_data *tpg) +{ + return tpg->hflip; +} + +static inline void tpg_s_vflip(struct tpg_data *tpg, bool vflip) +{ + tpg->vflip = vflip; +} + +static inline bool tpg_g_vflip(const struct tpg_data *tpg) +{ + return tpg->vflip; +} + +static inline bool tpg_pattern_is_static(const struct tpg_data *tpg) +{ + return tpg->pattern != TPG_PAT_NOISE && + tpg->mv_hor_mode == TPG_MOVE_NONE && + tpg->mv_vert_mode == TPG_MOVE_NONE; +} + +#endif diff --git a/include/media/tuner-types.h b/include/media/tuner-types.h new file mode 100644 index 000000000..df76ac8e6 --- /dev/null +++ b/include/media/tuner-types.h @@ -0,0 +1,205 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * descriptions for simple tuners. + */ + +#ifndef __TUNER_TYPES_H__ +#define __TUNER_TYPES_H__ + +/** + * enum param_type - type of the tuner pameters + * + * @TUNER_PARAM_TYPE_RADIO: Tuner params are for FM and/or AM radio + * @TUNER_PARAM_TYPE_PAL: Tuner params are for PAL color TV standard + * @TUNER_PARAM_TYPE_SECAM: Tuner params are for SECAM color TV standard + * @TUNER_PARAM_TYPE_NTSC: Tuner params are for NTSC color TV standard + * @TUNER_PARAM_TYPE_DIGITAL: Tuner params are for digital TV + */ +enum param_type { + TUNER_PARAM_TYPE_RADIO, + TUNER_PARAM_TYPE_PAL, + TUNER_PARAM_TYPE_SECAM, + TUNER_PARAM_TYPE_NTSC, + TUNER_PARAM_TYPE_DIGITAL, +}; + +/** + * struct tuner_range - define the frequencies supported by the tuner + * + * @limit: Max frequency supported by that range, in 62.5 kHz + * (TV) or 62.5 Hz (Radio), as defined by + * V4L2_TUNER_CAP_LOW. + * @config: Value of the band switch byte (BB) to setup this mode. + * @cb: Value of the CB byte to setup this mode. + * + * Please notice that digital tuners like xc3028/xc4000/xc5000 don't use + * those ranges, as they're defined inside the driver. This is used by + * analog tuners that are compatible with the "Philips way" to setup the + * tuners. On those devices, the tuner set is done via 4 bytes: + * + * #) divider byte1 (DB1) + * #) divider byte 2 (DB2) + * #) Control byte (CB) + * #) band switch byte (BB) + * + * Some tuners also have an additional optional Auxiliary byte (AB). + */ +struct tuner_range { + unsigned short limit; + unsigned char config; + unsigned char cb; +}; + +/** + * struct tuner_params - Parameters to be used to setup the tuner. Those + * are used by drivers/media/tuners/tuner-types.c in + * order to specify the tuner properties. Most of + * the parameters are for tuners based on tda9887 IF-PLL + * multi-standard analog TV/Radio demodulator, with is + * very common on legacy analog tuners. + * + * @type: Type of the tuner parameters, as defined at + * enum param_type. If the tuner supports multiple + * standards, an array should be used, with one + * row per different standard. + * @cb_first_if_lower_freq: Many Philips-based tuners have a comment in + * their datasheet like + * "For channel selection involving band + * switching, and to ensure smooth tuning to the + * desired channel without causing unnecessary + * charge pump action, it is recommended to + * consider the difference between wanted channel + * frequency and the current channel frequency. + * Unnecessary charge pump action will result + * in very low tuning voltage which may drive the + * oscillator to extreme conditions". + * Set cb_first_if_lower_freq to 1, if this check + * is required for this tuner. I tested this for + * PAL by first setting the TV frequency to + * 203 MHz and then switching to 96.6 MHz FM + * radio. The result was static unless the + * control byte was sent first. + * @has_tda9887: Set to 1 if this tuner uses a tda9887 + * @port1_fm_high_sensitivity: Many Philips tuners use tda9887 PORT1 to select + * the FM radio sensitivity. If this setting is 1, + * then set PORT1 to 1 to get proper FM reception. + * @port2_fm_high_sensitivity: Some Philips tuners use tda9887 PORT2 to select + * the FM radio sensitivity. If this setting is 1, + * then set PORT2 to 1 to get proper FM reception. + * @fm_gain_normal: Some Philips tuners use tda9887 cGainNormal to + * select the FM radio sensitivity. If this + * setting is 1, e register will use cGainNormal + * instead of cGainLow. + * @intercarrier_mode: Most tuners with a tda9887 use QSS mode. + * Some (cheaper) tuners use Intercarrier mode. + * If this setting is 1, then the tuner needs to + * be set to intercarrier mode. + * @port1_active: This setting sets the default value for PORT1. + * 0 means inactive, 1 means active. Note: the + * actual bit value written to the tda9887 is + * inverted. So a 0 here means a 1 in the B6 bit. + * @port2_active: This setting sets the default value for PORT2. + * 0 means inactive, 1 means active. Note: the + * actual bit value written to the tda9887 is + * inverted. So a 0 here means a 1 in the B7 bit. + * @port1_invert_for_secam_lc: Sometimes PORT1 is inverted when the SECAM-L' + * standard is selected. Set this bit to 1 if this + * is needed. + * @port2_invert_for_secam_lc: Sometimes PORT2 is inverted when the SECAM-L' + * standard is selected. Set this bit to 1 if this + * is needed. + * @port1_set_for_fm_mono: Some cards require PORT1 to be 1 for mono Radio + * FM and 0 for stereo. + * @default_pll_gating_18: Select 18% (or according to datasheet 0%) + * L standard PLL gating, vs the driver default + * of 36%. + * @radio_if: IF to use in radio mode. Tuners with a + * separate radio IF filter seem to use 10.7, + * while those without use 33.3 for PAL/SECAM + * tuners and 41.3 for NTSC tuners. + * 0 = 10.7, 1 = 33.3, 2 = 41.3 + * @default_top_low: Default tda9887 TOP value in dB for the low + * band. Default is 0. Range: -16:+15 + * @default_top_mid: Default tda9887 TOP value in dB for the mid + * band. Default is 0. Range: -16:+15 + * @default_top_high: Default tda9887 TOP value in dB for the high + * band. Default is 0. Range: -16:+15 + * @default_top_secam_low: Default tda9887 TOP value in dB for SECAM-L/L' + * for the low band. Default is 0. Several tuners + * require a different TOP value for the + * SECAM-L/L' standards. Range: -16:+15 + * @default_top_secam_mid: Default tda9887 TOP value in dB for SECAM-L/L' + * for the mid band. Default is 0. Several tuners + * require a different TOP value for the + * SECAM-L/L' standards. Range: -16:+15 + * @default_top_secam_high: Default tda9887 TOP value in dB for SECAM-L/L' + * for the high band. Default is 0. Several tuners + * require a different TOP value for the + * SECAM-L/L' standards. Range: -16:+15 + * @iffreq: Intermediate frequency (IF) used by the tuner + * on digital mode. + * @count: Size of the ranges array. + * @ranges: Array with the frequency ranges supported by + * the tuner. + */ +struct tuner_params { + enum param_type type; + + unsigned int cb_first_if_lower_freq:1; + unsigned int has_tda9887:1; + unsigned int port1_fm_high_sensitivity:1; + unsigned int port2_fm_high_sensitivity:1; + unsigned int fm_gain_normal:1; + unsigned int intercarrier_mode:1; + unsigned int port1_active:1; + unsigned int port2_active:1; + unsigned int port1_invert_for_secam_lc:1; + unsigned int port2_invert_for_secam_lc:1; + unsigned int port1_set_for_fm_mono:1; + unsigned int default_pll_gating_18:1; + unsigned int radio_if:2; + signed int default_top_low:5; + signed int default_top_mid:5; + signed int default_top_high:5; + signed int default_top_secam_low:5; + signed int default_top_secam_mid:5; + signed int default_top_secam_high:5; + + u16 iffreq; + + unsigned int count; + struct tuner_range *ranges; +}; + +/** + * struct tunertype - describes the known tuners. + * + * @name: string with the tuner's name. + * @count: size of &struct tuner_params array. + * @params: pointer to &struct tuner_params array. + * + * @min: minimal tuner frequency, in 62.5 kHz step. + * should be multiplied to 16 to convert to MHz. + * @max: minimal tuner frequency, in 62.5 kHz step. + * Should be multiplied to 16 to convert to MHz. + * @stepsize: frequency step, in Hz. + * @initdata: optional byte sequence to initialize the tuner. + * @sleepdata: optional byte sequence to power down the tuner. + */ +struct tunertype { + char *name; + unsigned int count; + struct tuner_params *params; + + u16 min; + u16 max; + u32 stepsize; + + u8 *initdata; + u8 *sleepdata; +}; + +extern struct tunertype tuners[]; +extern unsigned const int tuner_count; + +#endif diff --git a/include/media/tuner.h b/include/media/tuner.h new file mode 100644 index 000000000..ff85d7227 --- /dev/null +++ b/include/media/tuner.h @@ -0,0 +1,227 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * tuner.h - definition for different tuners + * + * Copyright (C) 1997 Markus Schroeder (schroedm@uni-duesseldorf.de) + * minor modifications by Ralph Metzler (rjkm@thp.uni-koeln.de) + */ + +#ifndef _TUNER_H +#define _TUNER_H +#ifdef __KERNEL__ + +#include <linux/videodev2.h> +#include <media/v4l2-mc.h> + +#define ADDR_UNSET (255) + +#define TUNER_TEMIC_PAL 0 /* 4002 FH5 (3X 7756, 9483) */ +#define TUNER_PHILIPS_PAL_I 1 +#define TUNER_PHILIPS_NTSC 2 +#define TUNER_PHILIPS_SECAM 3 /* you must actively select B/G, L, L` */ + +#define TUNER_ABSENT 4 +#define TUNER_PHILIPS_PAL 5 +#define TUNER_TEMIC_NTSC 6 /* 4032 FY5 (3X 7004, 9498, 9789) */ +#define TUNER_TEMIC_PAL_I 7 /* 4062 FY5 (3X 8501, 9957) */ + +#define TUNER_TEMIC_4036FY5_NTSC 8 /* 4036 FY5 (3X 1223, 1981, 7686) */ +#define TUNER_ALPS_TSBH1_NTSC 9 +#define TUNER_ALPS_TSBE1_PAL 10 +#define TUNER_ALPS_TSBB5_PAL_I 11 + +#define TUNER_ALPS_TSBE5_PAL 12 +#define TUNER_ALPS_TSBC5_PAL 13 +#define TUNER_TEMIC_4006FH5_PAL 14 /* 4006 FH5 (3X 9500, 9501, 7291) */ +#define TUNER_ALPS_TSHC6_NTSC 15 + +#define TUNER_TEMIC_PAL_DK 16 /* 4016 FY5 (3X 1392, 1393) */ +#define TUNER_PHILIPS_NTSC_M 17 +#define TUNER_TEMIC_4066FY5_PAL_I 18 /* 4066 FY5 (3X 7032, 7035) */ +#define TUNER_TEMIC_4006FN5_MULTI_PAL 19 /* B/G, I and D/K autodetected (3X 7595, 7606, 7657) */ + +#define TUNER_TEMIC_4009FR5_PAL 20 /* incl. FM radio (3X 7607, 7488, 7711) */ +#define TUNER_TEMIC_4039FR5_NTSC 21 /* incl. FM radio (3X 7246, 7578, 7732) */ +#define TUNER_TEMIC_4046FM5 22 /* you must actively select B/G, D/K, I, L, L` ! (3X 7804, 7806, 8103, 8104) */ +#define TUNER_PHILIPS_PAL_DK 23 + +#define TUNER_PHILIPS_FQ1216ME 24 /* you must actively select B/G/D/K, I, L, L` */ +#define TUNER_LG_PAL_I_FM 25 +#define TUNER_LG_PAL_I 26 +#define TUNER_LG_NTSC_FM 27 + +#define TUNER_LG_PAL_FM 28 +#define TUNER_LG_PAL 29 +#define TUNER_TEMIC_4009FN5_MULTI_PAL_FM 30 /* B/G, I and D/K autodetected (3X 8155, 8160, 8163) */ +#define TUNER_SHARP_2U5JF5540_NTSC 31 + +#define TUNER_Samsung_PAL_TCPM9091PD27 32 +#define TUNER_MT2032 33 +#define TUNER_TEMIC_4106FH5 34 /* 4106 FH5 (3X 7808, 7865) */ +#define TUNER_TEMIC_4012FY5 35 /* 4012 FY5 (3X 0971, 1099) */ + +#define TUNER_TEMIC_4136FY5 36 /* 4136 FY5 (3X 7708, 7746) */ +#define TUNER_LG_PAL_NEW_TAPC 37 +#define TUNER_PHILIPS_FM1216ME_MK3 38 +#define TUNER_LG_NTSC_NEW_TAPC 39 + +#define TUNER_HITACHI_NTSC 40 +#define TUNER_PHILIPS_PAL_MK 41 +#define TUNER_PHILIPS_FCV1236D 42 +#define TUNER_PHILIPS_FM1236_MK3 43 + +#define TUNER_PHILIPS_4IN1 44 /* ATI TV Wonder Pro - Conexant */ + /* + * Microtune merged with Temic 12/31/1999 partially financed by Alps. + * these may be similar to Temic + */ +#define TUNER_MICROTUNE_4049FM5 45 +#define TUNER_PANASONIC_VP27 46 +#define TUNER_LG_NTSC_TAPE 47 + +#define TUNER_TNF_8831BGFF 48 +#define TUNER_MICROTUNE_4042FI5 49 /* DViCO FusionHDTV 3 Gold-Q - 4042 FI5 (3X 8147) */ +#define TUNER_TCL_2002N 50 +#define TUNER_PHILIPS_FM1256_IH3 51 + +#define TUNER_THOMSON_DTT7610 52 +#define TUNER_PHILIPS_FQ1286 53 +#define TUNER_PHILIPS_TDA8290 54 +#define TUNER_TCL_2002MB 55 /* Hauppauge PVR-150 PAL */ + +#define TUNER_PHILIPS_FQ1216AME_MK4 56 /* Hauppauge PVR-150 PAL */ +#define TUNER_PHILIPS_FQ1236A_MK4 57 /* Hauppauge PVR-500MCE NTSC */ +#define TUNER_YMEC_TVF_8531MF 58 +#define TUNER_YMEC_TVF_5533MF 59 /* Pixelview Pro Ultra NTSC */ + +#define TUNER_THOMSON_DTT761X 60 /* DTT 7611 7611A 7612 7613 7613A 7614 7615 7615A */ +#define TUNER_TENA_9533_DI 61 +#define TUNER_TEA5767 62 /* Only FM Radio Tuner */ +#define TUNER_PHILIPS_FMD1216ME_MK3 63 + +#define TUNER_LG_TDVS_H06XF 64 /* TDVS H061F, H062F, H064F */ +#define TUNER_YMEC_TVF66T5_B_DFF 65 /* Acorp Y878F */ +#define TUNER_LG_TALN 66 +#define TUNER_PHILIPS_TD1316 67 + +#define TUNER_PHILIPS_TUV1236D 68 /* ATI HDTV Wonder */ +#define TUNER_TNF_5335MF 69 /* Sabrent Bt848 */ +#define TUNER_SAMSUNG_TCPN_2121P30A 70 /* Hauppauge PVR-500MCE NTSC */ +#define TUNER_XC2028 71 + +#define TUNER_THOMSON_FE6600 72 /* DViCO FusionHDTV DVB-T Hybrid */ +#define TUNER_SAMSUNG_TCPG_6121P30A 73 /* Hauppauge PVR-500 PAL */ +#define TUNER_TDA9887 74 /* This tuner should be used only internally */ +#define TUNER_TEA5761 75 /* Only FM Radio Tuner */ +#define TUNER_XC5000 76 /* Xceive Silicon Tuner */ +#define TUNER_TCL_MF02GIP_5N 77 /* TCL MF02GIP_5N */ +#define TUNER_PHILIPS_FMD1216MEX_MK3 78 +#define TUNER_PHILIPS_FM1216MK5 79 +#define TUNER_PHILIPS_FQ1216LME_MK3 80 /* Active loopthrough, no FM */ + +#define TUNER_PARTSNIC_PTI_5NF05 81 +#define TUNER_PHILIPS_CU1216L 82 +#define TUNER_NXP_TDA18271 83 +#define TUNER_SONY_BTF_PXN01Z 84 +#define TUNER_PHILIPS_FQ1236_MK5 85 /* NTSC, TDA9885, no FM radio */ +#define TUNER_TENA_TNF_5337 86 + +#define TUNER_XC4000 87 /* Xceive Silicon Tuner */ +#define TUNER_XC5000C 88 /* Xceive Silicon Tuner */ + +#define TUNER_SONY_BTF_PG472Z 89 /* PAL+SECAM */ +#define TUNER_SONY_BTF_PK467Z 90 /* NTSC_JP */ +#define TUNER_SONY_BTF_PB463Z 91 /* NTSC */ + +/* tv card specific */ +#define TDA9887_PRESENT (1<<0) +#define TDA9887_PORT1_INACTIVE (1<<1) +#define TDA9887_PORT2_INACTIVE (1<<2) +#define TDA9887_QSS (1<<3) +#define TDA9887_INTERCARRIER (1<<4) +#define TDA9887_PORT1_ACTIVE (1<<5) +#define TDA9887_PORT2_ACTIVE (1<<6) +#define TDA9887_INTERCARRIER_NTSC (1<<7) +/* Tuner takeover point adjustment, in dB, -16 <= top <= 15 */ +#define TDA9887_TOP_MASK (0x3f << 8) +#define TDA9887_TOP_SET (1 << 13) +#define TDA9887_TOP(top) (TDA9887_TOP_SET | \ + (((16 + (top)) & 0x1f) << 8)) + +/* config options */ +#define TDA9887_DEEMPHASIS_MASK (3<<16) +#define TDA9887_DEEMPHASIS_NONE (1<<16) +#define TDA9887_DEEMPHASIS_50 (2<<16) +#define TDA9887_DEEMPHASIS_75 (3<<16) +#define TDA9887_AUTOMUTE (1<<18) +#define TDA9887_GATING_18 (1<<19) +#define TDA9887_GAIN_NORMAL (1<<20) +#define TDA9887_RIF_41_3 (1<<21) /* radio IF1 41.3 vs 33.3 */ + +/** + * enum tuner_mode - Mode of the tuner + * + * @T_RADIO: Tuner core will work in radio mode + * @T_ANALOG_TV: Tuner core will work in analog TV mode + * + * Older boards only had a single tuner device, but some devices have a + * separate tuner for radio. In any case, the tuner-core needs to know if + * the tuner chip(s) will be used in radio mode or analog TV mode, as, on + * radio mode, frequencies are specified on a different range than on TV + * mode. This enum is used by the tuner core in order to work with the + * proper tuner range and eventually use a different tuner chip while in + * radio mode. + */ +enum tuner_mode { + T_RADIO = 1 << V4L2_TUNER_RADIO, + T_ANALOG_TV = 1 << V4L2_TUNER_ANALOG_TV, + /* Don't map V4L2_TUNER_DIGITAL_TV, as tuner-core won't use it */ +}; + +/** + * struct tuner_setup - setup the tuner chipsets + * + * @addr: I2C address used to control the tuner device/chipset + * @type: Type of the tuner, as defined at the TUNER_* macros. + * Each different tuner model should have an unique + * identifier. + * @mode_mask: Mask with the allowed tuner modes: V4L2_TUNER_RADIO, + * V4L2_TUNER_ANALOG_TV and/or V4L2_TUNER_DIGITAL_TV, + * describing if the tuner should be used to support + * Radio, analog TV and/or digital TV. + * @config: Used to send tuner-specific configuration for complex + * tuners that require extra parameters to be set. + * Only a very few tuners require it and its usage on + * newer tuners should be avoided. + * @tuner_callback: Some tuners require to call back the bridge driver, + * in order to do some tasks like rising a GPIO at the + * bridge chipset, in order to do things like resetting + * the device. + * + * Older boards only had a single tuner device. Nowadays multiple tuner + * devices may be present on a single board. Using TUNER_SET_TYPE_ADDR + * to pass the tuner_setup structure it is possible to setup each tuner + * device in turn. + * + * Since multiple devices may be present it is no longer sufficient to + * send a command to a single i2c device. Instead you should broadcast + * the command to all i2c devices. + * + * By setting the mode_mask correctly you can select which commands are + * accepted by a specific tuner device. For example, set mode_mask to + * T_RADIO if the device is a radio-only tuner. That specific tuner will + * only accept commands when the tuner is in radio mode and ignore them + * when the tuner is set to TV mode. + */ + +struct tuner_setup { + unsigned short addr; + unsigned int type; + unsigned int mode_mask; + void *config; + int (*tuner_callback)(void *dev, int component, int cmd, int arg); +}; + +#endif /* __KERNEL__ */ + +#endif /* _TUNER_H */ diff --git a/include/media/tveeprom.h b/include/media/tveeprom.h new file mode 100644 index 000000000..b56eaee82 --- /dev/null +++ b/include/media/tveeprom.h @@ -0,0 +1,116 @@ +/* SPDX-License-Identifier: GPL-2.0 */ + +/* + * tveeprom - Contains structures and functions to work with Hauppauge + * eeproms. + */ + +#include <linux/if_ether.h> + +/** + * enum tveeprom_audio_processor - Specifies the type of audio processor + * used on a Hauppauge device. + * + * @TVEEPROM_AUDPROC_NONE: No audio processor present + * @TVEEPROM_AUDPROC_INTERNAL: The audio processor is internal to the + * video processor + * @TVEEPROM_AUDPROC_MSP: The audio processor is a MSPXXXX device + * @TVEEPROM_AUDPROC_OTHER: The audio processor is another device + */ +enum tveeprom_audio_processor { + TVEEPROM_AUDPROC_NONE, + TVEEPROM_AUDPROC_INTERNAL, + TVEEPROM_AUDPROC_MSP, + TVEEPROM_AUDPROC_OTHER, +}; + +/** + * struct tveeprom - Contains the fields parsed from Hauppauge eeproms + * + * @has_radio: 1 if the device has radio; 0 otherwise. + * + * @has_ir: If has_ir == 0, then it is unknown what the IR + * capabilities are. Otherwise: + * bit 0) 1 (= IR capabilities are known); + * bit 1) IR receiver present; + * bit 2) IR transmitter (blaster) present. + * + * @has_MAC_address: 0: no MAC, 1: MAC present, 2: unknown. + * @tuner_type: type of the tuner (TUNER_*, as defined at + * include/media/tuner.h). + * + * @tuner_formats: Supported analog TV standards (V4L2_STD_*). + * @tuner_hauppauge_model: Hauppauge's code for the device model number. + * @tuner2_type: type of the second tuner (TUNER_*, as defined + * at include/media/tuner.h). + * + * @tuner2_formats: Tuner 2 supported analog TV standards + * (V4L2_STD_*). + * + * @tuner2_hauppauge_model: tuner 2 Hauppauge's code for the device model + * number. + * + * @audio_processor: analog audio decoder, as defined by enum + * tveeprom_audio_processor. + * + * @decoder_processor: Hauppauge's code for the decoder chipset. + * Unused by the drivers, as they probe the + * decoder based on the PCI or USB ID. + * + * @model: Hauppauge's model number + * + * @revision: Card revision number + * + * @serial_number: Card's serial number + * + * @rev_str: Card revision converted to number + * + * @MAC_address: MAC address for the network interface + */ +struct tveeprom { + u32 has_radio; + u32 has_ir; + u32 has_MAC_address; + + u32 tuner_type; + u32 tuner_formats; + u32 tuner_hauppauge_model; + + u32 tuner2_type; + u32 tuner2_formats; + u32 tuner2_hauppauge_model; + + u32 audio_processor; + u32 decoder_processor; + + u32 model; + u32 revision; + u32 serial_number; + char rev_str[5]; + u8 MAC_address[ETH_ALEN]; +}; + +/** + * tveeprom_hauppauge_analog - Fill struct tveeprom using the contents + * of the eeprom previously filled at + * @eeprom_data field. + * + * @tvee: Struct to where the eeprom parsed data will be filled; + * @eeprom_data: Array with the contents of the eeprom_data. It should + * contain 256 bytes filled with the contents of the + * eeprom read from the Hauppauge device. + */ +void tveeprom_hauppauge_analog(struct tveeprom *tvee, + unsigned char *eeprom_data); + +/** + * tveeprom_read - Reads the contents of the eeprom found at the Hauppauge + * devices. + * + * @c: I2C client struct + * @eedata: Array where the eeprom content will be stored. + * @len: Size of @eedata array. If the eeprom content will be latter + * be parsed by tveeprom_hauppauge_analog(), len should be, at + * least, 256. + */ +int tveeprom_read(struct i2c_client *c, unsigned char *eedata, int len); diff --git a/include/media/v4l2-async.h b/include/media/v4l2-async.h new file mode 100644 index 000000000..92cd9f038 --- /dev/null +++ b/include/media/v4l2-async.h @@ -0,0 +1,332 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * V4L2 asynchronous subdevice registration API + * + * Copyright (C) 2012-2013, Guennadi Liakhovetski <g.liakhovetski@gmx.de> + */ + +#ifndef V4L2_ASYNC_H +#define V4L2_ASYNC_H + +#include <linux/list.h> +#include <linux/mutex.h> + +struct device; +struct device_node; +struct v4l2_device; +struct v4l2_subdev; +struct v4l2_async_notifier; + +/** + * enum v4l2_async_match_type - type of asynchronous subdevice logic to be used + * in order to identify a match + * + * @V4L2_ASYNC_MATCH_CUSTOM: Match will use the logic provided by &struct + * v4l2_async_subdev.match ops + * @V4L2_ASYNC_MATCH_DEVNAME: Match will use the device name + * @V4L2_ASYNC_MATCH_I2C: Match will check for I2C adapter ID and address + * @V4L2_ASYNC_MATCH_FWNODE: Match will use firmware node + * + * This enum is used by the asyncrhronous sub-device logic to define the + * algorithm that will be used to match an asynchronous device. + */ +enum v4l2_async_match_type { + V4L2_ASYNC_MATCH_CUSTOM, + V4L2_ASYNC_MATCH_DEVNAME, + V4L2_ASYNC_MATCH_I2C, + V4L2_ASYNC_MATCH_FWNODE, +}; + +/** + * struct v4l2_async_subdev - sub-device descriptor, as known to a bridge + * + * @match_type: type of match that will be used + * @match: union of per-bus type matching data sets + * @match.fwnode: + * pointer to &struct fwnode_handle to be matched. + * Used if @match_type is %V4L2_ASYNC_MATCH_FWNODE. + * @match.device_name: + * string containing the device name to be matched. + * Used if @match_type is %V4L2_ASYNC_MATCH_DEVNAME. + * @match.i2c: embedded struct with I2C parameters to be matched. + * Both @match.i2c.adapter_id and @match.i2c.address + * should be matched. + * Used if @match_type is %V4L2_ASYNC_MATCH_I2C. + * @match.i2c.adapter_id: + * I2C adapter ID to be matched. + * Used if @match_type is %V4L2_ASYNC_MATCH_I2C. + * @match.i2c.address: + * I2C address to be matched. + * Used if @match_type is %V4L2_ASYNC_MATCH_I2C. + * @match.custom: + * Driver-specific match criteria. + * Used if @match_type is %V4L2_ASYNC_MATCH_CUSTOM. + * @match.custom.match: + * Driver-specific match function to be used if + * %V4L2_ASYNC_MATCH_CUSTOM. + * @match.custom.priv: + * Driver-specific private struct with match parameters + * to be used if %V4L2_ASYNC_MATCH_CUSTOM. + * @asd_list: used to add struct v4l2_async_subdev objects to the + * master notifier @asd_list + * @list: used to link struct v4l2_async_subdev objects, waiting to be + * probed, to a notifier->waiting list + * + * When this struct is used as a member in a driver specific struct, + * the driver specific struct shall contain the &struct + * v4l2_async_subdev as its first member. + */ +struct v4l2_async_subdev { + enum v4l2_async_match_type match_type; + union { + struct fwnode_handle *fwnode; + const char *device_name; + struct { + int adapter_id; + unsigned short address; + } i2c; + struct { + bool (*match)(struct device *dev, + struct v4l2_async_subdev *sd); + void *priv; + } custom; + } match; + + /* v4l2-async core private: not to be used by drivers */ + struct list_head list; + struct list_head asd_list; +}; + +/** + * struct v4l2_async_notifier_operations - Asynchronous V4L2 notifier operations + * @bound: a subdevice driver has successfully probed one of the subdevices + * @complete: All subdevices have been probed successfully. The complete + * callback is only executed for the root notifier. + * @unbind: a subdevice is leaving + */ +struct v4l2_async_notifier_operations { + int (*bound)(struct v4l2_async_notifier *notifier, + struct v4l2_subdev *subdev, + struct v4l2_async_subdev *asd); + int (*complete)(struct v4l2_async_notifier *notifier); + void (*unbind)(struct v4l2_async_notifier *notifier, + struct v4l2_subdev *subdev, + struct v4l2_async_subdev *asd); +}; + +/** + * struct v4l2_async_notifier - v4l2_device notifier data + * + * @ops: notifier operations + * @v4l2_dev: v4l2_device of the root notifier, NULL otherwise + * @sd: sub-device that registered the notifier, NULL otherwise + * @parent: parent notifier + * @asd_list: master list of struct v4l2_async_subdev + * @waiting: list of struct v4l2_async_subdev, waiting for their drivers + * @done: list of struct v4l2_subdev, already probed + * @list: member in a global list of notifiers + */ +struct v4l2_async_notifier { + const struct v4l2_async_notifier_operations *ops; + struct v4l2_device *v4l2_dev; + struct v4l2_subdev *sd; + struct v4l2_async_notifier *parent; + struct list_head asd_list; + struct list_head waiting; + struct list_head done; + struct list_head list; +}; + +/** + * v4l2_async_notifier_init - Initialize a notifier. + * + * @notifier: pointer to &struct v4l2_async_notifier + * + * This function initializes the notifier @asd_list. It must be called + * before the first call to @v4l2_async_notifier_add_subdev. + */ +void v4l2_async_notifier_init(struct v4l2_async_notifier *notifier); + +/** + * v4l2_async_notifier_add_subdev - Add an async subdev to the + * notifier's master asd list. + * + * @notifier: pointer to &struct v4l2_async_notifier + * @asd: pointer to &struct v4l2_async_subdev + * + * Call this function before registering a notifier to link the provided @asd to + * the notifiers master @asd_list. The @asd must be allocated with k*alloc() as + * it will be freed by the framework when the notifier is destroyed. + */ +int v4l2_async_notifier_add_subdev(struct v4l2_async_notifier *notifier, + struct v4l2_async_subdev *asd); + +/** + * v4l2_async_notifier_add_fwnode_subdev - Allocate and add a fwnode async + * subdev to the notifier's master asd_list. + * + * @notifier: pointer to &struct v4l2_async_notifier + * @fwnode: fwnode handle of the sub-device to be matched + * @asd_struct_size: size of the driver's async sub-device struct, including + * sizeof(struct v4l2_async_subdev). The &struct + * v4l2_async_subdev shall be the first member of + * the driver's async sub-device struct, i.e. both + * begin at the same memory address. + * + * Allocate a fwnode-matched asd of size asd_struct_size, and add it to the + * notifiers @asd_list. The function also gets a reference of the fwnode which + * is released later at notifier cleanup time. + */ +struct v4l2_async_subdev * +v4l2_async_notifier_add_fwnode_subdev(struct v4l2_async_notifier *notifier, + struct fwnode_handle *fwnode, + unsigned int asd_struct_size); + +/** + * v4l2_async_notifier_add_fwnode_remote_subdev - Allocate and add a fwnode + * remote async subdev to the + * notifier's master asd_list. + * + * @notif: pointer to &struct v4l2_async_notifier + * @endpoint: local endpoint pointing to the remote sub-device to be matched + * @asd_struct_size: size of the driver's async sub-device struct, including + * sizeof(struct v4l2_async_subdev). The &struct + * v4l2_async_subdev shall be the first member of + * the driver's async sub-device struct, i.e. both + * begin at the same memory address. + * + * Gets the remote endpoint of a given local endpoint, set it up for fwnode + * matching and adds the async sub-device to the notifier's @asd_list. The + * function also gets a reference of the fwnode which is released later at + * notifier cleanup time. + * + * This is just like @v4l2_async_notifier_add_fwnode_subdev, but with the + * exception that the fwnode refers to a local endpoint, not the remote one. + */ +struct v4l2_async_subdev * +v4l2_async_notifier_add_fwnode_remote_subdev(struct v4l2_async_notifier *notif, + struct fwnode_handle *endpoint, + unsigned int asd_struct_size); + +/** + * v4l2_async_notifier_add_i2c_subdev - Allocate and add an i2c async + * subdev to the notifier's master asd_list. + * + * @notifier: pointer to &struct v4l2_async_notifier + * @adapter_id: I2C adapter ID to be matched + * @address: I2C address of sub-device to be matched + * @asd_struct_size: size of the driver's async sub-device struct, including + * sizeof(struct v4l2_async_subdev). The &struct + * v4l2_async_subdev shall be the first member of + * the driver's async sub-device struct, i.e. both + * begin at the same memory address. + * + * Same as above but for I2C matched sub-devices. + */ +struct v4l2_async_subdev * +v4l2_async_notifier_add_i2c_subdev(struct v4l2_async_notifier *notifier, + int adapter_id, unsigned short address, + unsigned int asd_struct_size); + +/** + * v4l2_async_notifier_add_devname_subdev - Allocate and add a device-name + * async subdev to the notifier's master asd_list. + * + * @notifier: pointer to &struct v4l2_async_notifier + * @device_name: device name string to be matched + * @asd_struct_size: size of the driver's async sub-device struct, including + * sizeof(struct v4l2_async_subdev). The &struct + * v4l2_async_subdev shall be the first member of + * the driver's async sub-device struct, i.e. both + * begin at the same memory address. + * + * Same as above but for device-name matched sub-devices. + */ +struct v4l2_async_subdev * +v4l2_async_notifier_add_devname_subdev(struct v4l2_async_notifier *notifier, + const char *device_name, + unsigned int asd_struct_size); + +/** + * v4l2_async_notifier_register - registers a subdevice asynchronous notifier + * + * @v4l2_dev: pointer to &struct v4l2_device + * @notifier: pointer to &struct v4l2_async_notifier + */ +int v4l2_async_notifier_register(struct v4l2_device *v4l2_dev, + struct v4l2_async_notifier *notifier); + +/** + * v4l2_async_subdev_notifier_register - registers a subdevice asynchronous + * notifier for a sub-device + * + * @sd: pointer to &struct v4l2_subdev + * @notifier: pointer to &struct v4l2_async_notifier + */ +int v4l2_async_subdev_notifier_register(struct v4l2_subdev *sd, + struct v4l2_async_notifier *notifier); + +/** + * v4l2_async_notifier_unregister - unregisters a subdevice + * asynchronous notifier + * + * @notifier: pointer to &struct v4l2_async_notifier + */ +void v4l2_async_notifier_unregister(struct v4l2_async_notifier *notifier); + +/** + * v4l2_async_notifier_cleanup - clean up notifier resources + * @notifier: the notifier the resources of which are to be cleaned up + * + * Release memory resources related to a notifier, including the async + * sub-devices allocated for the purposes of the notifier but not the notifier + * itself. The user is responsible for calling this function to clean up the + * notifier after calling + * @v4l2_async_notifier_add_subdev, + * @v4l2_async_notifier_parse_fwnode_endpoints or + * @v4l2_fwnode_reference_parse_sensor_common. + * + * There is no harm from calling v4l2_async_notifier_cleanup in other + * cases as long as its memory has been zeroed after it has been + * allocated. + */ +void v4l2_async_notifier_cleanup(struct v4l2_async_notifier *notifier); + +/** + * v4l2_async_register_subdev - registers a sub-device to the asynchronous + * subdevice framework + * + * @sd: pointer to &struct v4l2_subdev + */ +int v4l2_async_register_subdev(struct v4l2_subdev *sd); + +/** + * v4l2_async_register_subdev_sensor_common - registers a sensor sub-device to + * the asynchronous sub-device + * framework and parse set up common + * sensor related devices + * + * @sd: pointer to struct &v4l2_subdev + * + * This function is just like v4l2_async_register_subdev() with the exception + * that calling it will also parse firmware interfaces for remote references + * using v4l2_async_notifier_parse_fwnode_sensor_common() and registers the + * async sub-devices. The sub-device is similarly unregistered by calling + * v4l2_async_unregister_subdev(). + * + * While registered, the subdev module is marked as in-use. + * + * An error is returned if the module is no longer loaded on any attempts + * to register it. + */ +int __must_check +v4l2_async_register_subdev_sensor_common(struct v4l2_subdev *sd); + +/** + * v4l2_async_unregister_subdev - unregisters a sub-device to the asynchronous + * subdevice framework + * + * @sd: pointer to &struct v4l2_subdev + */ +void v4l2_async_unregister_subdev(struct v4l2_subdev *sd); +#endif diff --git a/include/media/v4l2-clk.h b/include/media/v4l2-clk.h new file mode 100644 index 000000000..d9d21a43a --- /dev/null +++ b/include/media/v4l2-clk.h @@ -0,0 +1,73 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * V4L2 clock service + * + * Copyright (C) 2012-2013, Guennadi Liakhovetski <g.liakhovetski@gmx.de> + * + * ATTENTION: This is a temporary API and it shall be replaced by the generic + * clock API, when the latter becomes widely available. + */ + +#ifndef MEDIA_V4L2_CLK_H +#define MEDIA_V4L2_CLK_H + +#include <linux/atomic.h> +#include <linux/export.h> +#include <linux/list.h> +#include <linux/mutex.h> + +struct module; +struct device; + +struct clk; +struct v4l2_clk { + struct list_head list; + const struct v4l2_clk_ops *ops; + const char *dev_id; + int enable; + struct mutex lock; /* Protect the enable count */ + atomic_t use_count; + struct clk *clk; + void *priv; +}; + +struct v4l2_clk_ops { + struct module *owner; + int (*enable)(struct v4l2_clk *clk); + void (*disable)(struct v4l2_clk *clk); + unsigned long (*get_rate)(struct v4l2_clk *clk); + int (*set_rate)(struct v4l2_clk *clk, unsigned long); +}; + +struct v4l2_clk *v4l2_clk_register(const struct v4l2_clk_ops *ops, + const char *dev_name, + void *priv); +void v4l2_clk_unregister(struct v4l2_clk *clk); +struct v4l2_clk *v4l2_clk_get(struct device *dev, const char *id); +void v4l2_clk_put(struct v4l2_clk *clk); +int v4l2_clk_enable(struct v4l2_clk *clk); +void v4l2_clk_disable(struct v4l2_clk *clk); +unsigned long v4l2_clk_get_rate(struct v4l2_clk *clk); +int v4l2_clk_set_rate(struct v4l2_clk *clk, unsigned long rate); + +struct module; + +struct v4l2_clk *__v4l2_clk_register_fixed(const char *dev_id, + unsigned long rate, struct module *owner); +void v4l2_clk_unregister_fixed(struct v4l2_clk *clk); + +static inline struct v4l2_clk *v4l2_clk_register_fixed(const char *dev_id, + unsigned long rate) +{ + return __v4l2_clk_register_fixed(dev_id, rate, THIS_MODULE); +} + +#define V4L2_CLK_NAME_SIZE 64 + +#define v4l2_clk_name_i2c(name, size, adap, client) snprintf(name, size, \ + "%d-%04x", adap, client) + +#define v4l2_clk_name_of(name, size, node) snprintf(name, size, \ + "of-%pOF", node) + +#endif diff --git a/include/media/v4l2-common.h b/include/media/v4l2-common.h new file mode 100644 index 000000000..2e53ee1c8 --- /dev/null +++ b/include/media/v4l2-common.h @@ -0,0 +1,572 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + v4l2 common internal API header + + This header contains internal shared ioctl definitions for use by the + internal low-level v4l2 drivers. + Each ioctl begins with VIDIOC_INT_ to clearly mark that it is an internal + define, + + Copyright (C) 2005 Hans Verkuil <hverkuil@xs4all.nl> + + */ + +#ifndef V4L2_COMMON_H_ +#define V4L2_COMMON_H_ + +#include <linux/time.h> +#include <media/v4l2-dev.h> + +/* Common printk constructs for v4l-i2c drivers. These macros create a unique + prefix consisting of the driver name, the adapter number and the i2c + address. */ +#define v4l_printk(level, name, adapter, addr, fmt, arg...) \ + printk(level "%s %d-%04x: " fmt, name, i2c_adapter_id(adapter), addr , ## arg) + +#define v4l_client_printk(level, client, fmt, arg...) \ + v4l_printk(level, (client)->dev.driver->name, (client)->adapter, \ + (client)->addr, fmt , ## arg) + +#define v4l_err(client, fmt, arg...) \ + v4l_client_printk(KERN_ERR, client, fmt , ## arg) + +#define v4l_warn(client, fmt, arg...) \ + v4l_client_printk(KERN_WARNING, client, fmt , ## arg) + +#define v4l_info(client, fmt, arg...) \ + v4l_client_printk(KERN_INFO, client, fmt , ## arg) + +/* These three macros assume that the debug level is set with a module + parameter called 'debug'. */ +#define v4l_dbg(level, debug, client, fmt, arg...) \ + do { \ + if (debug >= (level)) \ + v4l_client_printk(KERN_DEBUG, client, fmt , ## arg); \ + } while (0) + +/* Add a version of v4l_dbg to be used on drivers using dev_foo() macros */ +#define dev_dbg_lvl(__dev, __level, __debug, __fmt, __arg...) \ + do { \ + if (__debug >= (__level)) \ + dev_printk(KERN_DEBUG, __dev, __fmt, ##__arg); \ + } while (0) + +/* ------------------------------------------------------------------------- */ + +/* These printk constructs can be used with v4l2_device and v4l2_subdev */ +#define v4l2_printk(level, dev, fmt, arg...) \ + printk(level "%s: " fmt, (dev)->name , ## arg) + +#define v4l2_err(dev, fmt, arg...) \ + v4l2_printk(KERN_ERR, dev, fmt , ## arg) + +#define v4l2_warn(dev, fmt, arg...) \ + v4l2_printk(KERN_WARNING, dev, fmt , ## arg) + +#define v4l2_info(dev, fmt, arg...) \ + v4l2_printk(KERN_INFO, dev, fmt , ## arg) + +/* These three macros assume that the debug level is set with a module + parameter called 'debug'. */ +#define v4l2_dbg(level, debug, dev, fmt, arg...) \ + do { \ + if (debug >= (level)) \ + v4l2_printk(KERN_DEBUG, dev, fmt , ## arg); \ + } while (0) + +/** + * v4l2_ctrl_query_fill- Fill in a struct v4l2_queryctrl + * + * @qctrl: pointer to the &struct v4l2_queryctrl to be filled + * @min: minimum value for the control + * @max: maximum value for the control + * @step: control step + * @def: default value for the control + * + * Fills the &struct v4l2_queryctrl fields for the query control. + * + * .. note:: + * + * This function assumes that the @qctrl->id field is filled. + * + * Returns -EINVAL if the control is not known by the V4L2 core, 0 on success. + */ + +int v4l2_ctrl_query_fill(struct v4l2_queryctrl *qctrl, + s32 min, s32 max, s32 step, s32 def); + +/* ------------------------------------------------------------------------- */ + +struct v4l2_device; +struct v4l2_subdev; +struct v4l2_subdev_ops; + +/* I2C Helper functions */ +#include <linux/i2c.h> + +/** + * enum v4l2_i2c_tuner_type - specifies the range of tuner address that + * should be used when seeking for I2C devices. + * + * @ADDRS_RADIO: Radio tuner addresses. + * Represent the following I2C addresses: + * 0x10 (if compiled with tea5761 support) + * and 0x60. + * @ADDRS_DEMOD: Demod tuner addresses. + * Represent the following I2C addresses: + * 0x42, 0x43, 0x4a and 0x4b. + * @ADDRS_TV: TV tuner addresses. + * Represent the following I2C addresses: + * 0x42, 0x43, 0x4a, 0x4b, 0x60, 0x61, 0x62, + * 0x63 and 0x64. + * @ADDRS_TV_WITH_DEMOD: TV tuner addresses if demod is present, this + * excludes addresses used by the demodulator + * from the list of candidates. + * Represent the following I2C addresses: + * 0x60, 0x61, 0x62, 0x63 and 0x64. + * + * NOTE: All I2C addresses above use the 7-bit notation. + */ +enum v4l2_i2c_tuner_type { + ADDRS_RADIO, + ADDRS_DEMOD, + ADDRS_TV, + ADDRS_TV_WITH_DEMOD, +}; + +#if defined(CONFIG_VIDEO_V4L2_I2C) + +/** + * v4l2_i2c_new_subdev - Load an i2c module and return an initialized + * &struct v4l2_subdev. + * + * @v4l2_dev: pointer to &struct v4l2_device + * @adapter: pointer to struct i2c_adapter + * @client_type: name of the chip that's on the adapter. + * @addr: I2C address. If zero, it will use @probe_addrs + * @probe_addrs: array with a list of address. The last entry at such + * array should be %I2C_CLIENT_END. + * + * returns a &struct v4l2_subdev pointer. + */ +struct v4l2_subdev *v4l2_i2c_new_subdev(struct v4l2_device *v4l2_dev, + struct i2c_adapter *adapter, const char *client_type, + u8 addr, const unsigned short *probe_addrs); + +/** + * v4l2_i2c_new_subdev_board - Load an i2c module and return an initialized + * &struct v4l2_subdev. + * + * @v4l2_dev: pointer to &struct v4l2_device + * @adapter: pointer to struct i2c_adapter + * @info: pointer to struct i2c_board_info used to replace the irq, + * platform_data and addr arguments. + * @probe_addrs: array with a list of address. The last entry at such + * array should be %I2C_CLIENT_END. + * + * returns a &struct v4l2_subdev pointer. + */ +struct v4l2_subdev *v4l2_i2c_new_subdev_board(struct v4l2_device *v4l2_dev, + struct i2c_adapter *adapter, struct i2c_board_info *info, + const unsigned short *probe_addrs); + +/** + * v4l2_i2c_subdev_set_name - Set name for an I²C sub-device + * + * @sd: pointer to &struct v4l2_subdev + * @client: pointer to struct i2c_client + * @devname: the name of the device; if NULL, the I²C device drivers's name + * will be used + * @postfix: sub-device specific string to put right after the I²C device name; + * may be NULL + */ +void v4l2_i2c_subdev_set_name(struct v4l2_subdev *sd, struct i2c_client *client, + const char *devname, const char *postfix); + +/** + * v4l2_i2c_subdev_init - Initializes a &struct v4l2_subdev with data from + * an i2c_client struct. + * + * @sd: pointer to &struct v4l2_subdev + * @client: pointer to struct i2c_client + * @ops: pointer to &struct v4l2_subdev_ops + */ +void v4l2_i2c_subdev_init(struct v4l2_subdev *sd, struct i2c_client *client, + const struct v4l2_subdev_ops *ops); + +/** + * v4l2_i2c_subdev_addr - returns i2c client address of &struct v4l2_subdev. + * + * @sd: pointer to &struct v4l2_subdev + * + * Returns the address of an I2C sub-device + */ +unsigned short v4l2_i2c_subdev_addr(struct v4l2_subdev *sd); + +/** + * v4l2_i2c_tuner_addrs - Return a list of I2C tuner addresses to probe. + * + * @type: type of the tuner to seek, as defined by + * &enum v4l2_i2c_tuner_type. + * + * NOTE: Use only if the tuner addresses are unknown. + */ +const unsigned short *v4l2_i2c_tuner_addrs(enum v4l2_i2c_tuner_type type); + +/** + * v4l2_i2c_subdev_unregister - Unregister a v4l2_subdev + * + * @sd: pointer to &struct v4l2_subdev + */ +void v4l2_i2c_subdev_unregister(struct v4l2_subdev *sd); + +#else + +static inline struct v4l2_subdev * +v4l2_i2c_new_subdev(struct v4l2_device *v4l2_dev, + struct i2c_adapter *adapter, const char *client_type, + u8 addr, const unsigned short *probe_addrs) +{ + return NULL; +} + +static inline struct v4l2_subdev * +v4l2_i2c_new_subdev_board(struct v4l2_device *v4l2_dev, + struct i2c_adapter *adapter, struct i2c_board_info *info, + const unsigned short *probe_addrs) +{ + return NULL; +} + +static inline void +v4l2_i2c_subdev_set_name(struct v4l2_subdev *sd, struct i2c_client *client, + const char *devname, const char *postfix) +{} + +static inline void +v4l2_i2c_subdev_init(struct v4l2_subdev *sd, struct i2c_client *client, + const struct v4l2_subdev_ops *ops) +{} + +static inline unsigned short v4l2_i2c_subdev_addr(struct v4l2_subdev *sd) +{ + return I2C_CLIENT_END; +} + +static inline const unsigned short * +v4l2_i2c_tuner_addrs(enum v4l2_i2c_tuner_type type) +{ + return NULL; +} + +static inline void v4l2_i2c_subdev_unregister(struct v4l2_subdev *sd) +{} + +#endif + +/* ------------------------------------------------------------------------- */ + +/* SPI Helper functions */ + +#include <linux/spi/spi.h> + +#if defined(CONFIG_SPI) + +/** + * v4l2_spi_new_subdev - Load an spi module and return an initialized + * &struct v4l2_subdev. + * + * + * @v4l2_dev: pointer to &struct v4l2_device. + * @master: pointer to struct spi_master. + * @info: pointer to struct spi_board_info. + * + * returns a &struct v4l2_subdev pointer. + */ +struct v4l2_subdev *v4l2_spi_new_subdev(struct v4l2_device *v4l2_dev, + struct spi_master *master, struct spi_board_info *info); + +/** + * v4l2_spi_subdev_init - Initialize a v4l2_subdev with data from an + * spi_device struct. + * + * @sd: pointer to &struct v4l2_subdev + * @spi: pointer to struct spi_device. + * @ops: pointer to &struct v4l2_subdev_ops + */ +void v4l2_spi_subdev_init(struct v4l2_subdev *sd, struct spi_device *spi, + const struct v4l2_subdev_ops *ops); + +/** + * v4l2_spi_subdev_unregister - Unregister a v4l2_subdev + * + * @sd: pointer to &struct v4l2_subdev + */ +void v4l2_spi_subdev_unregister(struct v4l2_subdev *sd); + +#else + +static inline struct v4l2_subdev * +v4l2_spi_new_subdev(struct v4l2_device *v4l2_dev, + struct spi_master *master, struct spi_board_info *info) +{ + return NULL; +} + +static inline void +v4l2_spi_subdev_init(struct v4l2_subdev *sd, struct spi_device *spi, + const struct v4l2_subdev_ops *ops) +{} + +static inline void v4l2_spi_subdev_unregister(struct v4l2_subdev *sd) +{} +#endif + +/* ------------------------------------------------------------------------- */ + +/* + * FIXME: these remaining ioctls/structs should be removed as well, but they + * are still used in tuner-simple.c (TUNER_SET_CONFIG) and cx18/ivtv (RESET). + * To remove these ioctls some more cleanup is needed in those modules. + * + * It doesn't make much sense on documenting them, as what we really want is + * to get rid of them. + */ + +/* s_config */ +struct v4l2_priv_tun_config { + int tuner; + void *priv; +}; +#define TUNER_SET_CONFIG _IOW('d', 92, struct v4l2_priv_tun_config) + +#define VIDIOC_INT_RESET _IOW ('d', 102, u32) + +/* ------------------------------------------------------------------------- */ + +/* Miscellaneous helper functions */ + +/** + * v4l_bound_align_image - adjust video dimensions according to + * a given constraints. + * + * @width: pointer to width that will be adjusted if needed. + * @wmin: minimum width. + * @wmax: maximum width. + * @walign: least significant bit on width. + * @height: pointer to height that will be adjusted if needed. + * @hmin: minimum height. + * @hmax: maximum height. + * @halign: least significant bit on height. + * @salign: least significant bit for the image size (e. g. + * :math:`width * height`). + * + * Clip an image to have @width between @wmin and @wmax, and @height between + * @hmin and @hmax, inclusive. + * + * Additionally, the @width will be a multiple of :math:`2^{walign}`, + * the @height will be a multiple of :math:`2^{halign}`, and the overall + * size :math:`width * height` will be a multiple of :math:`2^{salign}`. + * + * .. note:: + * + * #. The clipping rectangle may be shrunk or enlarged to fit the alignment + * constraints. + * #. @wmax must not be smaller than @wmin. + * #. @hmax must not be smaller than @hmin. + * #. The alignments must not be so high there are no possible image + * sizes within the allowed bounds. + * #. @wmin and @hmin must be at least 1 (don't use 0). + * #. For @walign, @halign and @salign, if you don't care about a certain + * alignment, specify ``0``, as :math:`2^0 = 1` and one byte alignment + * is equivalent to no alignment. + * #. If you only want to adjust downward, specify a maximum that's the + * same as the initial value. + */ +void v4l_bound_align_image(unsigned int *width, unsigned int wmin, + unsigned int wmax, unsigned int walign, + unsigned int *height, unsigned int hmin, + unsigned int hmax, unsigned int halign, + unsigned int salign); + +/** + * v4l2_find_nearest_size - Find the nearest size among a discrete + * set of resolutions contained in an array of a driver specific struct. + * + * @array: a driver specific array of image sizes + * @array_size: the length of the driver specific array of image sizes + * @width_field: the name of the width field in the driver specific struct + * @height_field: the name of the height field in the driver specific struct + * @width: desired width. + * @height: desired height. + * + * Finds the closest resolution to minimize the width and height differences + * between what requested and the supported resolutions. The size of the width + * and height fields in the driver specific must equal to that of u32, i.e. four + * bytes. + * + * Returns the best match or NULL if the length of the array is zero. + */ +#define v4l2_find_nearest_size(array, array_size, width_field, height_field, \ + width, height) \ + ({ \ + BUILD_BUG_ON(sizeof((array)->width_field) != sizeof(u32) || \ + sizeof((array)->height_field) != sizeof(u32)); \ + (typeof(&(array)[0]))__v4l2_find_nearest_size( \ + (array), array_size, sizeof(*(array)), \ + offsetof(typeof(*(array)), width_field), \ + offsetof(typeof(*(array)), height_field), \ + width, height); \ + }) +const void * +__v4l2_find_nearest_size(const void *array, size_t array_size, + size_t entry_size, size_t width_offset, + size_t height_offset, s32 width, s32 height); + +/** + * v4l2_g_parm_cap - helper routine for vidioc_g_parm to fill this in by + * calling the g_frame_interval op of the given subdev. It only works + * for V4L2_BUF_TYPE_VIDEO_CAPTURE(_MPLANE), hence the _cap in the + * function name. + * + * @vdev: the struct video_device pointer. Used to determine the device caps. + * @sd: the sub-device pointer. + * @a: the VIDIOC_G_PARM argument. + */ +int v4l2_g_parm_cap(struct video_device *vdev, + struct v4l2_subdev *sd, struct v4l2_streamparm *a); + +/** + * v4l2_s_parm_cap - helper routine for vidioc_s_parm to fill this in by + * calling the s_frame_interval op of the given subdev. It only works + * for V4L2_BUF_TYPE_VIDEO_CAPTURE(_MPLANE), hence the _cap in the + * function name. + * + * @vdev: the struct video_device pointer. Used to determine the device caps. + * @sd: the sub-device pointer. + * @a: the VIDIOC_S_PARM argument. + */ +int v4l2_s_parm_cap(struct video_device *vdev, + struct v4l2_subdev *sd, struct v4l2_streamparm *a); + +/* Compare two v4l2_fract structs */ +#define V4L2_FRACT_COMPARE(a, OP, b) \ + ((u64)(a).numerator * (b).denominator OP \ + (u64)(b).numerator * (a).denominator) + +/* ------------------------------------------------------------------------- */ + +/* Pixel format and FourCC helpers */ + +/** + * enum v4l2_pixel_encoding - specifies the pixel encoding value + * + * @V4L2_PIXEL_ENC_UNKNOWN: Pixel encoding is unknown/un-initialized + * @V4L2_PIXEL_ENC_YUV: Pixel encoding is YUV + * @V4L2_PIXEL_ENC_RGB: Pixel encoding is RGB + * @V4L2_PIXEL_ENC_BAYER: Pixel encoding is Bayer + */ +enum v4l2_pixel_encoding { + V4L2_PIXEL_ENC_UNKNOWN = 0, + V4L2_PIXEL_ENC_YUV = 1, + V4L2_PIXEL_ENC_RGB = 2, + V4L2_PIXEL_ENC_BAYER = 3, +}; + +/** + * struct v4l2_format_info - information about a V4L2 format + * @format: 4CC format identifier (V4L2_PIX_FMT_*) + * @pixel_enc: Pixel encoding (see enum v4l2_pixel_encoding above) + * @mem_planes: Number of memory planes, which includes the alpha plane (1 to 4). + * @comp_planes: Number of component planes, which includes the alpha plane (1 to 4). + * @bpp: Array of per-plane bytes per pixel + * @hdiv: Horizontal chroma subsampling factor + * @vdiv: Vertical chroma subsampling factor + * @block_w: Per-plane macroblock pixel width (optional) + * @block_h: Per-plane macroblock pixel height (optional) + */ +struct v4l2_format_info { + u32 format; + u8 pixel_enc; + u8 mem_planes; + u8 comp_planes; + u8 bpp[4]; + u8 hdiv; + u8 vdiv; + u8 block_w[4]; + u8 block_h[4]; +}; + +static inline bool v4l2_is_format_rgb(const struct v4l2_format_info *f) +{ + return f && f->pixel_enc == V4L2_PIXEL_ENC_RGB; +} + +static inline bool v4l2_is_format_yuv(const struct v4l2_format_info *f) +{ + return f && f->pixel_enc == V4L2_PIXEL_ENC_YUV; +} + +static inline bool v4l2_is_format_bayer(const struct v4l2_format_info *f) +{ + return f && f->pixel_enc == V4L2_PIXEL_ENC_BAYER; +} + +const struct v4l2_format_info *v4l2_format_info(u32 format); +void v4l2_apply_frmsize_constraints(u32 *width, u32 *height, + const struct v4l2_frmsize_stepwise *frmsize); +int v4l2_fill_pixfmt(struct v4l2_pix_format *pixfmt, u32 pixelformat, + u32 width, u32 height); +int v4l2_fill_pixfmt_mp(struct v4l2_pix_format_mplane *pixfmt, u32 pixelformat, + u32 width, u32 height); + +static inline u64 v4l2_buffer_get_timestamp(const struct v4l2_buffer *buf) +{ + /* + * When the timestamp comes from 32-bit user space, there may be + * uninitialized data in tv_usec, so cast it to u32. + * Otherwise allow invalid input for backwards compatibility. + */ + return buf->timestamp.tv_sec * NSEC_PER_SEC + + (u32)buf->timestamp.tv_usec * NSEC_PER_USEC; +} + +static inline void v4l2_buffer_set_timestamp(struct v4l2_buffer *buf, + u64 timestamp) +{ + struct timespec64 ts = ns_to_timespec64(timestamp); + + buf->timestamp.tv_sec = ts.tv_sec; + buf->timestamp.tv_usec = ts.tv_nsec / NSEC_PER_USEC; +} + +static inline bool v4l2_is_colorspace_valid(__u32 colorspace) +{ + return colorspace > V4L2_COLORSPACE_DEFAULT && + colorspace <= V4L2_COLORSPACE_DCI_P3; +} + +static inline bool v4l2_is_xfer_func_valid(__u32 xfer_func) +{ + return xfer_func > V4L2_XFER_FUNC_DEFAULT && + xfer_func <= V4L2_XFER_FUNC_SMPTE2084; +} + +static inline bool v4l2_is_ycbcr_enc_valid(__u8 ycbcr_enc) +{ + return ycbcr_enc > V4L2_YCBCR_ENC_DEFAULT && + ycbcr_enc <= V4L2_YCBCR_ENC_SMPTE240M; +} + +static inline bool v4l2_is_hsv_enc_valid(__u8 hsv_enc) +{ + return hsv_enc == V4L2_HSV_ENC_180 || hsv_enc == V4L2_HSV_ENC_256; +} + +static inline bool v4l2_is_quant_valid(__u8 quantization) +{ + return quantization == V4L2_QUANTIZATION_FULL_RANGE || + quantization == V4L2_QUANTIZATION_LIM_RANGE; +} + +#endif /* V4L2_COMMON_H_ */ diff --git a/include/media/v4l2-ctrls.h b/include/media/v4l2-ctrls.h new file mode 100644 index 000000000..9ecbb9890 --- /dev/null +++ b/include/media/v4l2-ctrls.h @@ -0,0 +1,1461 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * V4L2 controls support header. + * + * Copyright (C) 2010 Hans Verkuil <hverkuil@xs4all.nl> + */ + +#ifndef _V4L2_CTRLS_H +#define _V4L2_CTRLS_H + +#include <linux/list.h> +#include <linux/mutex.h> +#include <linux/videodev2.h> +#include <media/media-request.h> + +/* + * Include the stateless codec compound control definitions. + * This will move to the public headers once this API is fully stable. + */ +#include <media/mpeg2-ctrls.h> +#include <media/fwht-ctrls.h> +#include <media/h264-ctrls.h> +#include <media/vp8-ctrls.h> +#include <media/hevc-ctrls.h> + +/* forward references */ +struct file; +struct poll_table_struct; +struct v4l2_ctrl; +struct v4l2_ctrl_handler; +struct v4l2_ctrl_helper; +struct v4l2_fh; +struct v4l2_fwnode_device_properties; +struct v4l2_subdev; +struct v4l2_subscribed_event; +struct video_device; + +/** + * union v4l2_ctrl_ptr - A pointer to a control value. + * @p_s32: Pointer to a 32-bit signed value. + * @p_s64: Pointer to a 64-bit signed value. + * @p_u8: Pointer to a 8-bit unsigned value. + * @p_u16: Pointer to a 16-bit unsigned value. + * @p_u32: Pointer to a 32-bit unsigned value. + * @p_char: Pointer to a string. + * @p_mpeg2_slice_params: Pointer to a MPEG2 slice parameters structure. + * @p_mpeg2_quantization: Pointer to a MPEG2 quantization data structure. + * @p_fwht_params: Pointer to a FWHT stateless parameters structure. + * @p_h264_sps: Pointer to a struct v4l2_ctrl_h264_sps. + * @p_h264_pps: Pointer to a struct v4l2_ctrl_h264_pps. + * @p_h264_scaling_matrix: Pointer to a struct v4l2_ctrl_h264_scaling_matrix. + * @p_h264_slice_params: Pointer to a struct v4l2_ctrl_h264_slice_params. + * @p_h264_decode_params: Pointer to a struct v4l2_ctrl_h264_decode_params. + * @p_h264_pred_weights: Pointer to a struct v4l2_ctrl_h264_pred_weights. + * @p_vp8_frame_header: Pointer to a VP8 frame header structure. + * @p_hevc_sps: Pointer to an HEVC sequence parameter set structure. + * @p_hevc_pps: Pointer to an HEVC picture parameter set structure. + * @p_hevc_slice_params: Pointer to an HEVC slice parameters structure. + * @p_area: Pointer to an area. + * @p: Pointer to a compound value. + * @p_const: Pointer to a constant compound value. + */ +union v4l2_ctrl_ptr { + s32 *p_s32; + s64 *p_s64; + u8 *p_u8; + u16 *p_u16; + u32 *p_u32; + char *p_char; + struct v4l2_ctrl_mpeg2_slice_params *p_mpeg2_slice_params; + struct v4l2_ctrl_mpeg2_quantization *p_mpeg2_quantization; + struct v4l2_ctrl_fwht_params *p_fwht_params; + struct v4l2_ctrl_h264_sps *p_h264_sps; + struct v4l2_ctrl_h264_pps *p_h264_pps; + struct v4l2_ctrl_h264_scaling_matrix *p_h264_scaling_matrix; + struct v4l2_ctrl_h264_slice_params *p_h264_slice_params; + struct v4l2_ctrl_h264_decode_params *p_h264_decode_params; + struct v4l2_ctrl_h264_pred_weights *p_h264_pred_weights; + struct v4l2_ctrl_vp8_frame_header *p_vp8_frame_header; + struct v4l2_ctrl_hevc_sps *p_hevc_sps; + struct v4l2_ctrl_hevc_pps *p_hevc_pps; + struct v4l2_ctrl_hevc_slice_params *p_hevc_slice_params; + struct v4l2_area *p_area; + void *p; + const void *p_const; +}; + +/** + * v4l2_ctrl_ptr_create() - Helper function to return a v4l2_ctrl_ptr from a + * void pointer + * @ptr: The void pointer + */ +static inline union v4l2_ctrl_ptr v4l2_ctrl_ptr_create(void *ptr) +{ + union v4l2_ctrl_ptr p = { .p = ptr }; + + return p; +} + +/** + * struct v4l2_ctrl_ops - The control operations that the driver has to provide. + * + * @g_volatile_ctrl: Get a new value for this control. Generally only relevant + * for volatile (and usually read-only) controls such as a control + * that returns the current signal strength which changes + * continuously. + * If not set, then the currently cached value will be returned. + * @try_ctrl: Test whether the control's value is valid. Only relevant when + * the usual min/max/step checks are not sufficient. + * @s_ctrl: Actually set the new control value. s_ctrl is compulsory. The + * ctrl->handler->lock is held when these ops are called, so no + * one else can access controls owned by that handler. + */ +struct v4l2_ctrl_ops { + int (*g_volatile_ctrl)(struct v4l2_ctrl *ctrl); + int (*try_ctrl)(struct v4l2_ctrl *ctrl); + int (*s_ctrl)(struct v4l2_ctrl *ctrl); +}; + +/** + * struct v4l2_ctrl_type_ops - The control type operations that the driver + * has to provide. + * + * @equal: return true if both values are equal. + * @init: initialize the value. + * @log: log the value. + * @validate: validate the value. Return 0 on success and a negative value + * otherwise. + */ +struct v4l2_ctrl_type_ops { + bool (*equal)(const struct v4l2_ctrl *ctrl, u32 idx, + union v4l2_ctrl_ptr ptr1, + union v4l2_ctrl_ptr ptr2); + void (*init)(const struct v4l2_ctrl *ctrl, u32 idx, + union v4l2_ctrl_ptr ptr); + void (*log)(const struct v4l2_ctrl *ctrl); + int (*validate)(const struct v4l2_ctrl *ctrl, u32 idx, + union v4l2_ctrl_ptr ptr); +}; + +/** + * typedef v4l2_ctrl_notify_fnc - typedef for a notify argument with a function + * that should be called when a control value has changed. + * + * @ctrl: pointer to struct &v4l2_ctrl + * @priv: control private data + * + * This typedef definition is used as an argument to v4l2_ctrl_notify() + * and as an argument at struct &v4l2_ctrl_handler. + */ +typedef void (*v4l2_ctrl_notify_fnc)(struct v4l2_ctrl *ctrl, void *priv); + +/** + * struct v4l2_ctrl - The control structure. + * + * @node: The list node. + * @ev_subs: The list of control event subscriptions. + * @handler: The handler that owns the control. + * @cluster: Point to start of cluster array. + * @ncontrols: Number of controls in cluster array. + * @done: Internal flag: set for each processed control. + * @is_new: Set when the user specified a new value for this control. It + * is also set when called from v4l2_ctrl_handler_setup(). Drivers + * should never set this flag. + * @has_changed: Set when the current value differs from the new value. Drivers + * should never use this flag. + * @is_private: If set, then this control is private to its handler and it + * will not be added to any other handlers. Drivers can set + * this flag. + * @is_auto: If set, then this control selects whether the other cluster + * members are in 'automatic' mode or 'manual' mode. This is + * used for autogain/gain type clusters. Drivers should never + * set this flag directly. + * @is_int: If set, then this control has a simple integer value (i.e. it + * uses ctrl->val). + * @is_string: If set, then this control has type %V4L2_CTRL_TYPE_STRING. + * @is_ptr: If set, then this control is an array and/or has type >= + * %V4L2_CTRL_COMPOUND_TYPES + * and/or has type %V4L2_CTRL_TYPE_STRING. In other words, &struct + * v4l2_ext_control uses field p to point to the data. + * @is_array: If set, then this control contains an N-dimensional array. + * @has_volatiles: If set, then one or more members of the cluster are volatile. + * Drivers should never touch this flag. + * @call_notify: If set, then call the handler's notify function whenever the + * control's value changes. + * @manual_mode_value: If the is_auto flag is set, then this is the value + * of the auto control that determines if that control is in + * manual mode. So if the value of the auto control equals this + * value, then the whole cluster is in manual mode. Drivers should + * never set this flag directly. + * @ops: The control ops. + * @type_ops: The control type ops. + * @id: The control ID. + * @name: The control name. + * @type: The control type. + * @minimum: The control's minimum value. + * @maximum: The control's maximum value. + * @default_value: The control's default value. + * @step: The control's step value for non-menu controls. + * @elems: The number of elements in the N-dimensional array. + * @elem_size: The size in bytes of the control. + * @dims: The size of each dimension. + * @nr_of_dims:The number of dimensions in @dims. + * @menu_skip_mask: The control's skip mask for menu controls. This makes it + * easy to skip menu items that are not valid. If bit X is set, + * then menu item X is skipped. Of course, this only works for + * menus with <= 32 menu items. There are no menus that come + * close to that number, so this is OK. Should we ever need more, + * then this will have to be extended to a u64 or a bit array. + * @qmenu: A const char * array for all menu items. Array entries that are + * empty strings ("") correspond to non-existing menu items (this + * is in addition to the menu_skip_mask above). The last entry + * must be NULL. + * Used only if the @type is %V4L2_CTRL_TYPE_MENU. + * @qmenu_int: A 64-bit integer array for with integer menu items. + * The size of array must be equal to the menu size, e. g.: + * :math:`ceil(\frac{maximum - minimum}{step}) + 1`. + * Used only if the @type is %V4L2_CTRL_TYPE_INTEGER_MENU. + * @flags: The control's flags. + * @cur: Structure to store the current value. + * @cur.val: The control's current value, if the @type is represented via + * a u32 integer (see &enum v4l2_ctrl_type). + * @val: The control's new s32 value. + * @priv: The control's private pointer. For use by the driver. It is + * untouched by the control framework. Note that this pointer is + * not freed when the control is deleted. Should this be needed + * then a new internal bitfield can be added to tell the framework + * to free this pointer. + * @p_def: The control's default value represented via a union which + * provides a standard way of accessing control types + * through a pointer (for compound controls only). + * @p_cur: The control's current value represented via a union which + * provides a standard way of accessing control types + * through a pointer. + * @p_new: The control's new value represented via a union which provides + * a standard way of accessing control types + * through a pointer. + */ +struct v4l2_ctrl { + /* Administrative fields */ + struct list_head node; + struct list_head ev_subs; + struct v4l2_ctrl_handler *handler; + struct v4l2_ctrl **cluster; + unsigned int ncontrols; + + unsigned int done:1; + + unsigned int is_new:1; + unsigned int has_changed:1; + unsigned int is_private:1; + unsigned int is_auto:1; + unsigned int is_int:1; + unsigned int is_string:1; + unsigned int is_ptr:1; + unsigned int is_array:1; + unsigned int has_volatiles:1; + unsigned int call_notify:1; + unsigned int manual_mode_value:8; + + const struct v4l2_ctrl_ops *ops; + const struct v4l2_ctrl_type_ops *type_ops; + u32 id; + const char *name; + enum v4l2_ctrl_type type; + s64 minimum, maximum, default_value; + u32 elems; + u32 elem_size; + u32 dims[V4L2_CTRL_MAX_DIMS]; + u32 nr_of_dims; + union { + u64 step; + u64 menu_skip_mask; + }; + union { + const char * const *qmenu; + const s64 *qmenu_int; + }; + unsigned long flags; + void *priv; + s32 val; + struct { + s32 val; + } cur; + + union v4l2_ctrl_ptr p_def; + union v4l2_ctrl_ptr p_new; + union v4l2_ctrl_ptr p_cur; +}; + +/** + * struct v4l2_ctrl_ref - The control reference. + * + * @node: List node for the sorted list. + * @next: Single-link list node for the hash. + * @ctrl: The actual control information. + * @helper: Pointer to helper struct. Used internally in + * ``prepare_ext_ctrls`` function at ``v4l2-ctrl.c``. + * @from_other_dev: If true, then @ctrl was defined in another + * device than the &struct v4l2_ctrl_handler. + * @req_done: Internal flag: if the control handler containing this control + * reference is bound to a media request, then this is set when + * the control has been applied. This prevents applying controls + * from a cluster with multiple controls twice (when the first + * control of a cluster is applied, they all are). + * @valid_p_req: If set, then p_req contains the control value for the request. + * @p_req: If the control handler containing this control reference + * is bound to a media request, then this points to the + * value of the control that must be applied when the request + * is executed, or to the value of the control at the time + * that the request was completed. If @valid_p_req is false, + * then this control was never set for this request and the + * control will not be updated when this request is applied. + * + * Each control handler has a list of these refs. The list_head is used to + * keep a sorted-by-control-ID list of all controls, while the next pointer + * is used to link the control in the hash's bucket. + */ +struct v4l2_ctrl_ref { + struct list_head node; + struct v4l2_ctrl_ref *next; + struct v4l2_ctrl *ctrl; + struct v4l2_ctrl_helper *helper; + bool from_other_dev; + bool req_done; + bool valid_p_req; + union v4l2_ctrl_ptr p_req; +}; + +/** + * struct v4l2_ctrl_handler - The control handler keeps track of all the + * controls: both the controls owned by the handler and those inherited + * from other handlers. + * + * @_lock: Default for "lock". + * @lock: Lock to control access to this handler and its controls. + * May be replaced by the user right after init. + * @ctrls: The list of controls owned by this handler. + * @ctrl_refs: The list of control references. + * @cached: The last found control reference. It is common that the same + * control is needed multiple times, so this is a simple + * optimization. + * @buckets: Buckets for the hashing. Allows for quick control lookup. + * @notify: A notify callback that is called whenever the control changes + * value. + * Note that the handler's lock is held when the notify function + * is called! + * @notify_priv: Passed as argument to the v4l2_ctrl notify callback. + * @nr_of_buckets: Total number of buckets in the array. + * @error: The error code of the first failed control addition. + * @request_is_queued: True if the request was queued. + * @requests: List to keep track of open control handler request objects. + * For the parent control handler (@req_obj.ops == NULL) this + * is the list header. When the parent control handler is + * removed, it has to unbind and put all these requests since + * they refer to the parent. + * @requests_queued: List of the queued requests. This determines the order + * in which these controls are applied. Once the request is + * completed it is removed from this list. + * @req_obj: The &struct media_request_object, used to link into a + * &struct media_request. This request object has a refcount. + */ +struct v4l2_ctrl_handler { + struct mutex _lock; + struct mutex *lock; + struct list_head ctrls; + struct list_head ctrl_refs; + struct v4l2_ctrl_ref *cached; + struct v4l2_ctrl_ref **buckets; + v4l2_ctrl_notify_fnc notify; + void *notify_priv; + u16 nr_of_buckets; + int error; + bool request_is_queued; + struct list_head requests; + struct list_head requests_queued; + struct media_request_object req_obj; +}; + +/** + * struct v4l2_ctrl_config - Control configuration structure. + * + * @ops: The control ops. + * @type_ops: The control type ops. Only needed for compound controls. + * @id: The control ID. + * @name: The control name. + * @type: The control type. + * @min: The control's minimum value. + * @max: The control's maximum value. + * @step: The control's step value for non-menu controls. + * @def: The control's default value. + * @p_def: The control's default value for compound controls. + * @dims: The size of each dimension. + * @elem_size: The size in bytes of the control. + * @flags: The control's flags. + * @menu_skip_mask: The control's skip mask for menu controls. This makes it + * easy to skip menu items that are not valid. If bit X is set, + * then menu item X is skipped. Of course, this only works for + * menus with <= 64 menu items. There are no menus that come + * close to that number, so this is OK. Should we ever need more, + * then this will have to be extended to a bit array. + * @qmenu: A const char * array for all menu items. Array entries that are + * empty strings ("") correspond to non-existing menu items (this + * is in addition to the menu_skip_mask above). The last entry + * must be NULL. + * @qmenu_int: A const s64 integer array for all menu items of the type + * V4L2_CTRL_TYPE_INTEGER_MENU. + * @is_private: If set, then this control is private to its handler and it + * will not be added to any other handlers. + */ +struct v4l2_ctrl_config { + const struct v4l2_ctrl_ops *ops; + const struct v4l2_ctrl_type_ops *type_ops; + u32 id; + const char *name; + enum v4l2_ctrl_type type; + s64 min; + s64 max; + u64 step; + s64 def; + union v4l2_ctrl_ptr p_def; + u32 dims[V4L2_CTRL_MAX_DIMS]; + u32 elem_size; + u32 flags; + u64 menu_skip_mask; + const char * const *qmenu; + const s64 *qmenu_int; + unsigned int is_private:1; +}; + +/** + * v4l2_ctrl_fill - Fill in the control fields based on the control ID. + * + * @id: ID of the control + * @name: pointer to be filled with a string with the name of the control + * @type: pointer for storing the type of the control + * @min: pointer for storing the minimum value for the control + * @max: pointer for storing the maximum value for the control + * @step: pointer for storing the control step + * @def: pointer for storing the default value for the control + * @flags: pointer for storing the flags to be used on the control + * + * This works for all standard V4L2 controls. + * For non-standard controls it will only fill in the given arguments + * and @name content will be set to %NULL. + * + * This function will overwrite the contents of @name, @type and @flags. + * The contents of @min, @max, @step and @def may be modified depending on + * the type. + * + * .. note:: + * + * Do not use in drivers! It is used internally for backwards compatibility + * control handling only. Once all drivers are converted to use the new + * control framework this function will no longer be exported. + */ +void v4l2_ctrl_fill(u32 id, const char **name, enum v4l2_ctrl_type *type, + s64 *min, s64 *max, u64 *step, s64 *def, u32 *flags); + + +/** + * v4l2_ctrl_handler_init_class() - Initialize the control handler. + * @hdl: The control handler. + * @nr_of_controls_hint: A hint of how many controls this handler is + * expected to refer to. This is the total number, so including + * any inherited controls. It doesn't have to be precise, but if + * it is way off, then you either waste memory (too many buckets + * are allocated) or the control lookup becomes slower (not enough + * buckets are allocated, so there are more slow list lookups). + * It will always work, though. + * @key: Used by the lock validator if CONFIG_LOCKDEP is set. + * @name: Used by the lock validator if CONFIG_LOCKDEP is set. + * + * .. attention:: + * + * Never use this call directly, always use the v4l2_ctrl_handler_init() + * macro that hides the @key and @name arguments. + * + * Return: returns an error if the buckets could not be allocated. This + * error will also be stored in @hdl->error. + */ +int v4l2_ctrl_handler_init_class(struct v4l2_ctrl_handler *hdl, + unsigned int nr_of_controls_hint, + struct lock_class_key *key, const char *name); + +#ifdef CONFIG_LOCKDEP + +/** + * v4l2_ctrl_handler_init - helper function to create a static struct + * &lock_class_key and calls v4l2_ctrl_handler_init_class() + * + * @hdl: The control handler. + * @nr_of_controls_hint: A hint of how many controls this handler is + * expected to refer to. This is the total number, so including + * any inherited controls. It doesn't have to be precise, but if + * it is way off, then you either waste memory (too many buckets + * are allocated) or the control lookup becomes slower (not enough + * buckets are allocated, so there are more slow list lookups). + * It will always work, though. + * + * This helper function creates a static struct &lock_class_key and + * calls v4l2_ctrl_handler_init_class(), providing a proper name for the lock + * validador. + * + * Use this helper function to initialize a control handler. + */ +#define v4l2_ctrl_handler_init(hdl, nr_of_controls_hint) \ +( \ + ({ \ + static struct lock_class_key _key; \ + v4l2_ctrl_handler_init_class(hdl, nr_of_controls_hint, \ + &_key, \ + KBUILD_BASENAME ":" \ + __stringify(__LINE__) ":" \ + "(" #hdl ")->_lock"); \ + }) \ +) +#else +#define v4l2_ctrl_handler_init(hdl, nr_of_controls_hint) \ + v4l2_ctrl_handler_init_class(hdl, nr_of_controls_hint, NULL, NULL) +#endif + +/** + * v4l2_ctrl_handler_free() - Free all controls owned by the handler and free + * the control list. + * @hdl: The control handler. + * + * Does nothing if @hdl == NULL. + */ +void v4l2_ctrl_handler_free(struct v4l2_ctrl_handler *hdl); + +/** + * v4l2_ctrl_lock() - Helper function to lock the handler + * associated with the control. + * @ctrl: The control to lock. + */ +static inline void v4l2_ctrl_lock(struct v4l2_ctrl *ctrl) +{ + mutex_lock(ctrl->handler->lock); +} + +/** + * v4l2_ctrl_unlock() - Helper function to unlock the handler + * associated with the control. + * @ctrl: The control to unlock. + */ +static inline void v4l2_ctrl_unlock(struct v4l2_ctrl *ctrl) +{ + mutex_unlock(ctrl->handler->lock); +} + +/** + * __v4l2_ctrl_handler_setup() - Call the s_ctrl op for all controls belonging + * to the handler to initialize the hardware to the current control values. The + * caller is responsible for acquiring the control handler mutex on behalf of + * __v4l2_ctrl_handler_setup(). + * @hdl: The control handler. + * + * Button controls will be skipped, as are read-only controls. + * + * If @hdl == NULL, then this just returns 0. + */ +int __v4l2_ctrl_handler_setup(struct v4l2_ctrl_handler *hdl); + +/** + * v4l2_ctrl_handler_setup() - Call the s_ctrl op for all controls belonging + * to the handler to initialize the hardware to the current control values. + * @hdl: The control handler. + * + * Button controls will be skipped, as are read-only controls. + * + * If @hdl == NULL, then this just returns 0. + */ +int v4l2_ctrl_handler_setup(struct v4l2_ctrl_handler *hdl); + +/** + * v4l2_ctrl_handler_log_status() - Log all controls owned by the handler. + * @hdl: The control handler. + * @prefix: The prefix to use when logging the control values. If the + * prefix does not end with a space, then ": " will be added + * after the prefix. If @prefix == NULL, then no prefix will be + * used. + * + * For use with VIDIOC_LOG_STATUS. + * + * Does nothing if @hdl == NULL. + */ +void v4l2_ctrl_handler_log_status(struct v4l2_ctrl_handler *hdl, + const char *prefix); + +/** + * v4l2_ctrl_new_custom() - Allocate and initialize a new custom V4L2 + * control. + * + * @hdl: The control handler. + * @cfg: The control's configuration data. + * @priv: The control's driver-specific private data. + * + * If the &v4l2_ctrl struct could not be allocated then NULL is returned + * and @hdl->error is set to the error code (if it wasn't set already). + */ +struct v4l2_ctrl *v4l2_ctrl_new_custom(struct v4l2_ctrl_handler *hdl, + const struct v4l2_ctrl_config *cfg, + void *priv); + +/** + * v4l2_ctrl_new_std() - Allocate and initialize a new standard V4L2 non-menu + * control. + * + * @hdl: The control handler. + * @ops: The control ops. + * @id: The control ID. + * @min: The control's minimum value. + * @max: The control's maximum value. + * @step: The control's step value + * @def: The control's default value. + * + * If the &v4l2_ctrl struct could not be allocated, or the control + * ID is not known, then NULL is returned and @hdl->error is set to the + * appropriate error code (if it wasn't set already). + * + * If @id refers to a menu control, then this function will return NULL. + * + * Use v4l2_ctrl_new_std_menu() when adding menu controls. + */ +struct v4l2_ctrl *v4l2_ctrl_new_std(struct v4l2_ctrl_handler *hdl, + const struct v4l2_ctrl_ops *ops, + u32 id, s64 min, s64 max, u64 step, + s64 def); + +/** + * v4l2_ctrl_new_std_menu() - Allocate and initialize a new standard V4L2 + * menu control. + * + * @hdl: The control handler. + * @ops: The control ops. + * @id: The control ID. + * @max: The control's maximum value. + * @mask: The control's skip mask for menu controls. This makes it + * easy to skip menu items that are not valid. If bit X is set, + * then menu item X is skipped. Of course, this only works for + * menus with <= 64 menu items. There are no menus that come + * close to that number, so this is OK. Should we ever need more, + * then this will have to be extended to a bit array. + * @def: The control's default value. + * + * Same as v4l2_ctrl_new_std(), but @min is set to 0 and the @mask value + * determines which menu items are to be skipped. + * + * If @id refers to a non-menu control, then this function will return NULL. + */ +struct v4l2_ctrl *v4l2_ctrl_new_std_menu(struct v4l2_ctrl_handler *hdl, + const struct v4l2_ctrl_ops *ops, + u32 id, u8 max, u64 mask, u8 def); + +/** + * v4l2_ctrl_new_std_menu_items() - Create a new standard V4L2 menu control + * with driver specific menu. + * + * @hdl: The control handler. + * @ops: The control ops. + * @id: The control ID. + * @max: The control's maximum value. + * @mask: The control's skip mask for menu controls. This makes it + * easy to skip menu items that are not valid. If bit X is set, + * then menu item X is skipped. Of course, this only works for + * menus with <= 64 menu items. There are no menus that come + * close to that number, so this is OK. Should we ever need more, + * then this will have to be extended to a bit array. + * @def: The control's default value. + * @qmenu: The new menu. + * + * Same as v4l2_ctrl_new_std_menu(), but @qmenu will be the driver specific + * menu of this control. + * + */ +struct v4l2_ctrl *v4l2_ctrl_new_std_menu_items(struct v4l2_ctrl_handler *hdl, + const struct v4l2_ctrl_ops *ops, + u32 id, u8 max, + u64 mask, u8 def, + const char * const *qmenu); + +/** + * v4l2_ctrl_new_std_compound() - Allocate and initialize a new standard V4L2 + * compound control. + * + * @hdl: The control handler. + * @ops: The control ops. + * @id: The control ID. + * @p_def: The control's default value. + * + * Sames as v4l2_ctrl_new_std(), but with support to compound controls, thanks + * to the @p_def field. Use v4l2_ctrl_ptr_create() to create @p_def from a + * pointer. Use v4l2_ctrl_ptr_create(NULL) if the default value of the + * compound control should be all zeroes. + * + */ +struct v4l2_ctrl *v4l2_ctrl_new_std_compound(struct v4l2_ctrl_handler *hdl, + const struct v4l2_ctrl_ops *ops, + u32 id, + const union v4l2_ctrl_ptr p_def); + +/** + * v4l2_ctrl_new_int_menu() - Create a new standard V4L2 integer menu control. + * + * @hdl: The control handler. + * @ops: The control ops. + * @id: The control ID. + * @max: The control's maximum value. + * @def: The control's default value. + * @qmenu_int: The control's menu entries. + * + * Same as v4l2_ctrl_new_std_menu(), but @mask is set to 0 and it additionally + * takes as an argument an array of integers determining the menu items. + * + * If @id refers to a non-integer-menu control, then this function will + * return %NULL. + */ +struct v4l2_ctrl *v4l2_ctrl_new_int_menu(struct v4l2_ctrl_handler *hdl, + const struct v4l2_ctrl_ops *ops, + u32 id, u8 max, u8 def, + const s64 *qmenu_int); + +/** + * typedef v4l2_ctrl_filter - Typedef to define the filter function to be + * used when adding a control handler. + * + * @ctrl: pointer to struct &v4l2_ctrl. + */ + +typedef bool (*v4l2_ctrl_filter)(const struct v4l2_ctrl *ctrl); + +/** + * v4l2_ctrl_add_handler() - Add all controls from handler @add to + * handler @hdl. + * + * @hdl: The control handler. + * @add: The control handler whose controls you want to add to + * the @hdl control handler. + * @filter: This function will filter which controls should be added. + * @from_other_dev: If true, then the controls in @add were defined in another + * device than @hdl. + * + * Does nothing if either of the two handlers is a NULL pointer. + * If @filter is NULL, then all controls are added. Otherwise only those + * controls for which @filter returns true will be added. + * In case of an error @hdl->error will be set to the error code (if it + * wasn't set already). + */ +int v4l2_ctrl_add_handler(struct v4l2_ctrl_handler *hdl, + struct v4l2_ctrl_handler *add, + v4l2_ctrl_filter filter, + bool from_other_dev); + +/** + * v4l2_ctrl_radio_filter() - Standard filter for radio controls. + * + * @ctrl: The control that is filtered. + * + * This will return true for any controls that are valid for radio device + * nodes. Those are all of the V4L2_CID_AUDIO_* user controls and all FM + * transmitter class controls. + * + * This function is to be used with v4l2_ctrl_add_handler(). + */ +bool v4l2_ctrl_radio_filter(const struct v4l2_ctrl *ctrl); + +/** + * v4l2_ctrl_cluster() - Mark all controls in the cluster as belonging + * to that cluster. + * + * @ncontrols: The number of controls in this cluster. + * @controls: The cluster control array of size @ncontrols. + */ +void v4l2_ctrl_cluster(unsigned int ncontrols, struct v4l2_ctrl **controls); + + +/** + * v4l2_ctrl_auto_cluster() - Mark all controls in the cluster as belonging + * to that cluster and set it up for autofoo/foo-type handling. + * + * @ncontrols: The number of controls in this cluster. + * @controls: The cluster control array of size @ncontrols. The first control + * must be the 'auto' control (e.g. autogain, autoexposure, etc.) + * @manual_val: The value for the first control in the cluster that equals the + * manual setting. + * @set_volatile: If true, then all controls except the first auto control will + * be volatile. + * + * Use for control groups where one control selects some automatic feature and + * the other controls are only active whenever the automatic feature is turned + * off (manual mode). Typical examples: autogain vs gain, auto-whitebalance vs + * red and blue balance, etc. + * + * The behavior of such controls is as follows: + * + * When the autofoo control is set to automatic, then any manual controls + * are set to inactive and any reads will call g_volatile_ctrl (if the control + * was marked volatile). + * + * When the autofoo control is set to manual, then any manual controls will + * be marked active, and any reads will just return the current value without + * going through g_volatile_ctrl. + * + * In addition, this function will set the %V4L2_CTRL_FLAG_UPDATE flag + * on the autofoo control and %V4L2_CTRL_FLAG_INACTIVE on the foo control(s) + * if autofoo is in auto mode. + */ +void v4l2_ctrl_auto_cluster(unsigned int ncontrols, + struct v4l2_ctrl **controls, + u8 manual_val, bool set_volatile); + + +/** + * v4l2_ctrl_find() - Find a control with the given ID. + * + * @hdl: The control handler. + * @id: The control ID to find. + * + * If @hdl == NULL this will return NULL as well. Will lock the handler so + * do not use from inside &v4l2_ctrl_ops. + */ +struct v4l2_ctrl *v4l2_ctrl_find(struct v4l2_ctrl_handler *hdl, u32 id); + +/** + * v4l2_ctrl_activate() - Make the control active or inactive. + * @ctrl: The control to (de)activate. + * @active: True if the control should become active. + * + * This sets or clears the V4L2_CTRL_FLAG_INACTIVE flag atomically. + * Does nothing if @ctrl == NULL. + * This will usually be called from within the s_ctrl op. + * The V4L2_EVENT_CTRL event will be generated afterwards. + * + * This function assumes that the control handler is locked. + */ +void v4l2_ctrl_activate(struct v4l2_ctrl *ctrl, bool active); + +/** + * __v4l2_ctrl_grab() - Unlocked variant of v4l2_ctrl_grab. + * + * @ctrl: The control to (de)activate. + * @grabbed: True if the control should become grabbed. + * + * This sets or clears the V4L2_CTRL_FLAG_GRABBED flag atomically. + * Does nothing if @ctrl == NULL. + * The V4L2_EVENT_CTRL event will be generated afterwards. + * This will usually be called when starting or stopping streaming in the + * driver. + * + * This function assumes that the control handler is locked by the caller. + */ +void __v4l2_ctrl_grab(struct v4l2_ctrl *ctrl, bool grabbed); + +/** + * v4l2_ctrl_grab() - Mark the control as grabbed or not grabbed. + * + * @ctrl: The control to (de)activate. + * @grabbed: True if the control should become grabbed. + * + * This sets or clears the V4L2_CTRL_FLAG_GRABBED flag atomically. + * Does nothing if @ctrl == NULL. + * The V4L2_EVENT_CTRL event will be generated afterwards. + * This will usually be called when starting or stopping streaming in the + * driver. + * + * This function assumes that the control handler is not locked and will + * take the lock itself. + */ +static inline void v4l2_ctrl_grab(struct v4l2_ctrl *ctrl, bool grabbed) +{ + if (!ctrl) + return; + + v4l2_ctrl_lock(ctrl); + __v4l2_ctrl_grab(ctrl, grabbed); + v4l2_ctrl_unlock(ctrl); +} + +/** + *__v4l2_ctrl_modify_range() - Unlocked variant of v4l2_ctrl_modify_range() + * + * @ctrl: The control to update. + * @min: The control's minimum value. + * @max: The control's maximum value. + * @step: The control's step value + * @def: The control's default value. + * + * Update the range of a control on the fly. This works for control types + * INTEGER, BOOLEAN, MENU, INTEGER MENU and BITMASK. For menu controls the + * @step value is interpreted as a menu_skip_mask. + * + * An error is returned if one of the range arguments is invalid for this + * control type. + * + * The caller is responsible for acquiring the control handler mutex on behalf + * of __v4l2_ctrl_modify_range(). + */ +int __v4l2_ctrl_modify_range(struct v4l2_ctrl *ctrl, + s64 min, s64 max, u64 step, s64 def); + +/** + * v4l2_ctrl_modify_range() - Update the range of a control. + * + * @ctrl: The control to update. + * @min: The control's minimum value. + * @max: The control's maximum value. + * @step: The control's step value + * @def: The control's default value. + * + * Update the range of a control on the fly. This works for control types + * INTEGER, BOOLEAN, MENU, INTEGER MENU and BITMASK. For menu controls the + * @step value is interpreted as a menu_skip_mask. + * + * An error is returned if one of the range arguments is invalid for this + * control type. + * + * This function assumes that the control handler is not locked and will + * take the lock itself. + */ +static inline int v4l2_ctrl_modify_range(struct v4l2_ctrl *ctrl, + s64 min, s64 max, u64 step, s64 def) +{ + int rval; + + v4l2_ctrl_lock(ctrl); + rval = __v4l2_ctrl_modify_range(ctrl, min, max, step, def); + v4l2_ctrl_unlock(ctrl); + + return rval; +} + +/** + * v4l2_ctrl_notify() - Function to set a notify callback for a control. + * + * @ctrl: The control. + * @notify: The callback function. + * @priv: The callback private handle, passed as argument to the callback. + * + * This function sets a callback function for the control. If @ctrl is NULL, + * then it will do nothing. If @notify is NULL, then the notify callback will + * be removed. + * + * There can be only one notify. If another already exists, then a WARN_ON + * will be issued and the function will do nothing. + */ +void v4l2_ctrl_notify(struct v4l2_ctrl *ctrl, v4l2_ctrl_notify_fnc notify, + void *priv); + +/** + * v4l2_ctrl_get_name() - Get the name of the control + * + * @id: The control ID. + * + * This function returns the name of the given control ID or NULL if it isn't + * a known control. + */ +const char *v4l2_ctrl_get_name(u32 id); + +/** + * v4l2_ctrl_get_menu() - Get the menu string array of the control + * + * @id: The control ID. + * + * This function returns the NULL-terminated menu string array name of the + * given control ID or NULL if it isn't a known menu control. + */ +const char * const *v4l2_ctrl_get_menu(u32 id); + +/** + * v4l2_ctrl_get_int_menu() - Get the integer menu array of the control + * + * @id: The control ID. + * @len: The size of the integer array. + * + * This function returns the integer array of the given control ID or NULL if it + * if it isn't a known integer menu control. + */ +const s64 *v4l2_ctrl_get_int_menu(u32 id, u32 *len); + +/** + * v4l2_ctrl_g_ctrl() - Helper function to get the control's value from + * within a driver. + * + * @ctrl: The control. + * + * This returns the control's value safely by going through the control + * framework. This function will lock the control's handler, so it cannot be + * used from within the &v4l2_ctrl_ops functions. + * + * This function is for integer type controls only. + */ +s32 v4l2_ctrl_g_ctrl(struct v4l2_ctrl *ctrl); + +/** + * __v4l2_ctrl_s_ctrl() - Unlocked variant of v4l2_ctrl_s_ctrl(). + * + * @ctrl: The control. + * @val: The new value. + * + * This sets the control's new value safely by going through the control + * framework. This function assumes the control's handler is already locked, + * allowing it to be used from within the &v4l2_ctrl_ops functions. + * + * This function is for integer type controls only. + */ +int __v4l2_ctrl_s_ctrl(struct v4l2_ctrl *ctrl, s32 val); + +/** + * v4l2_ctrl_s_ctrl() - Helper function to set the control's value from + * within a driver. + * @ctrl: The control. + * @val: The new value. + * + * This sets the control's new value safely by going through the control + * framework. This function will lock the control's handler, so it cannot be + * used from within the &v4l2_ctrl_ops functions. + * + * This function is for integer type controls only. + */ +static inline int v4l2_ctrl_s_ctrl(struct v4l2_ctrl *ctrl, s32 val) +{ + int rval; + + v4l2_ctrl_lock(ctrl); + rval = __v4l2_ctrl_s_ctrl(ctrl, val); + v4l2_ctrl_unlock(ctrl); + + return rval; +} + +/** + * v4l2_ctrl_g_ctrl_int64() - Helper function to get a 64-bit control's value + * from within a driver. + * + * @ctrl: The control. + * + * This returns the control's value safely by going through the control + * framework. This function will lock the control's handler, so it cannot be + * used from within the &v4l2_ctrl_ops functions. + * + * This function is for 64-bit integer type controls only. + */ +s64 v4l2_ctrl_g_ctrl_int64(struct v4l2_ctrl *ctrl); + +/** + * __v4l2_ctrl_s_ctrl_int64() - Unlocked variant of v4l2_ctrl_s_ctrl_int64(). + * + * @ctrl: The control. + * @val: The new value. + * + * This sets the control's new value safely by going through the control + * framework. This function assumes the control's handler is already locked, + * allowing it to be used from within the &v4l2_ctrl_ops functions. + * + * This function is for 64-bit integer type controls only. + */ +int __v4l2_ctrl_s_ctrl_int64(struct v4l2_ctrl *ctrl, s64 val); + +/** + * v4l2_ctrl_s_ctrl_int64() - Helper function to set a 64-bit control's value + * from within a driver. + * + * @ctrl: The control. + * @val: The new value. + * + * This sets the control's new value safely by going through the control + * framework. This function will lock the control's handler, so it cannot be + * used from within the &v4l2_ctrl_ops functions. + * + * This function is for 64-bit integer type controls only. + */ +static inline int v4l2_ctrl_s_ctrl_int64(struct v4l2_ctrl *ctrl, s64 val) +{ + int rval; + + v4l2_ctrl_lock(ctrl); + rval = __v4l2_ctrl_s_ctrl_int64(ctrl, val); + v4l2_ctrl_unlock(ctrl); + + return rval; +} + +/** + * __v4l2_ctrl_s_ctrl_string() - Unlocked variant of v4l2_ctrl_s_ctrl_string(). + * + * @ctrl: The control. + * @s: The new string. + * + * This sets the control's new string safely by going through the control + * framework. This function assumes the control's handler is already locked, + * allowing it to be used from within the &v4l2_ctrl_ops functions. + * + * This function is for string type controls only. + */ +int __v4l2_ctrl_s_ctrl_string(struct v4l2_ctrl *ctrl, const char *s); + +/** + * v4l2_ctrl_s_ctrl_string() - Helper function to set a control's string value + * from within a driver. + * + * @ctrl: The control. + * @s: The new string. + * + * This sets the control's new string safely by going through the control + * framework. This function will lock the control's handler, so it cannot be + * used from within the &v4l2_ctrl_ops functions. + * + * This function is for string type controls only. + */ +static inline int v4l2_ctrl_s_ctrl_string(struct v4l2_ctrl *ctrl, const char *s) +{ + int rval; + + v4l2_ctrl_lock(ctrl); + rval = __v4l2_ctrl_s_ctrl_string(ctrl, s); + v4l2_ctrl_unlock(ctrl); + + return rval; +} + +/** + * __v4l2_ctrl_s_ctrl_compound() - Unlocked variant to set a compound control + * + * @ctrl: The control. + * @type: The type of the data. + * @p: The new compound payload. + * + * This sets the control's new compound payload safely by going through the + * control framework. This function assumes the control's handler is already + * locked, allowing it to be used from within the &v4l2_ctrl_ops functions. + * + * This function is for compound type controls only. + */ +int __v4l2_ctrl_s_ctrl_compound(struct v4l2_ctrl *ctrl, + enum v4l2_ctrl_type type, const void *p); + +/** + * v4l2_ctrl_s_ctrl_compound() - Helper function to set a compound control + * from within a driver. + * + * @ctrl: The control. + * @type: The type of the data. + * @p: The new compound payload. + * + * This sets the control's new compound payload safely by going through the + * control framework. This function will lock the control's handler, so it + * cannot be used from within the &v4l2_ctrl_ops functions. + * + * This function is for compound type controls only. + */ +static inline int v4l2_ctrl_s_ctrl_compound(struct v4l2_ctrl *ctrl, + enum v4l2_ctrl_type type, + const void *p) +{ + int rval; + + v4l2_ctrl_lock(ctrl); + rval = __v4l2_ctrl_s_ctrl_compound(ctrl, type, p); + v4l2_ctrl_unlock(ctrl); + + return rval; +} + +/* Helper defines for area type controls */ +#define __v4l2_ctrl_s_ctrl_area(ctrl, area) \ + __v4l2_ctrl_s_ctrl_compound((ctrl), V4L2_CTRL_TYPE_AREA, (area)) +#define v4l2_ctrl_s_ctrl_area(ctrl, area) \ + v4l2_ctrl_s_ctrl_compound((ctrl), V4L2_CTRL_TYPE_AREA, (area)) + +/* Internal helper functions that deal with control events. */ +extern const struct v4l2_subscribed_event_ops v4l2_ctrl_sub_ev_ops; + +/** + * v4l2_ctrl_replace - Function to be used as a callback to + * &struct v4l2_subscribed_event_ops replace\(\) + * + * @old: pointer to struct &v4l2_event with the reported + * event; + * @new: pointer to struct &v4l2_event with the modified + * event; + */ +void v4l2_ctrl_replace(struct v4l2_event *old, const struct v4l2_event *new); + +/** + * v4l2_ctrl_merge - Function to be used as a callback to + * &struct v4l2_subscribed_event_ops merge(\) + * + * @old: pointer to struct &v4l2_event with the reported + * event; + * @new: pointer to struct &v4l2_event with the merged + * event; + */ +void v4l2_ctrl_merge(const struct v4l2_event *old, struct v4l2_event *new); + +/** + * v4l2_ctrl_log_status - helper function to implement %VIDIOC_LOG_STATUS ioctl + * + * @file: pointer to struct file + * @fh: unused. Kept just to be compatible to the arguments expected by + * &struct v4l2_ioctl_ops.vidioc_log_status. + * + * Can be used as a vidioc_log_status function that just dumps all controls + * associated with the filehandle. + */ +int v4l2_ctrl_log_status(struct file *file, void *fh); + +/** + * v4l2_ctrl_subscribe_event - Subscribes to an event + * + * + * @fh: pointer to struct v4l2_fh + * @sub: pointer to &struct v4l2_event_subscription + * + * Can be used as a vidioc_subscribe_event function that just subscribes + * control events. + */ +int v4l2_ctrl_subscribe_event(struct v4l2_fh *fh, + const struct v4l2_event_subscription *sub); + +/** + * v4l2_ctrl_poll - function to be used as a callback to the poll() + * That just polls for control events. + * + * @file: pointer to struct file + * @wait: pointer to struct poll_table_struct + */ +__poll_t v4l2_ctrl_poll(struct file *file, struct poll_table_struct *wait); + +/** + * v4l2_ctrl_request_setup - helper function to apply control values in a request + * + * @req: The request + * @parent: The parent control handler ('priv' in media_request_object_find()) + * + * This is a helper function to call the control handler's s_ctrl callback with + * the control values contained in the request. Do note that this approach of + * applying control values in a request is only applicable to memory-to-memory + * devices. + */ +int v4l2_ctrl_request_setup(struct media_request *req, + struct v4l2_ctrl_handler *parent); + +/** + * v4l2_ctrl_request_complete - Complete a control handler request object + * + * @req: The request + * @parent: The parent control handler ('priv' in media_request_object_find()) + * + * This function is to be called on each control handler that may have had a + * request object associated with it, i.e. control handlers of a driver that + * supports requests. + * + * The function first obtains the values of any volatile controls in the control + * handler and attach them to the request. Then, the function completes the + * request object. + */ +void v4l2_ctrl_request_complete(struct media_request *req, + struct v4l2_ctrl_handler *parent); + +/** + * v4l2_ctrl_request_hdl_find - Find the control handler in the request + * + * @req: The request + * @parent: The parent control handler ('priv' in media_request_object_find()) + * + * This function finds the control handler in the request. It may return + * NULL if not found. When done, you must call v4l2_ctrl_request_put_hdl() + * with the returned handler pointer. + * + * If the request is not in state VALIDATING or QUEUED, then this function + * will always return NULL. + * + * Note that in state VALIDATING the req_queue_mutex is held, so + * no objects can be added or deleted from the request. + * + * In state QUEUED it is the driver that will have to ensure this. + */ +struct v4l2_ctrl_handler *v4l2_ctrl_request_hdl_find(struct media_request *req, + struct v4l2_ctrl_handler *parent); + +/** + * v4l2_ctrl_request_hdl_put - Put the control handler + * + * @hdl: Put this control handler + * + * This function released the control handler previously obtained from' + * v4l2_ctrl_request_hdl_find(). + */ +static inline void v4l2_ctrl_request_hdl_put(struct v4l2_ctrl_handler *hdl) +{ + if (hdl) + media_request_object_put(&hdl->req_obj); +} + +/** + * v4l2_ctrl_request_ctrl_find() - Find a control with the given ID. + * + * @hdl: The control handler from the request. + * @id: The ID of the control to find. + * + * This function returns a pointer to the control if this control is + * part of the request or NULL otherwise. + */ +struct v4l2_ctrl * +v4l2_ctrl_request_hdl_ctrl_find(struct v4l2_ctrl_handler *hdl, u32 id); + +/* Helpers for ioctl_ops */ + +/** + * v4l2_queryctrl - Helper function to implement + * :ref:`VIDIOC_QUERYCTRL <vidioc_queryctrl>` ioctl + * + * @hdl: pointer to &struct v4l2_ctrl_handler + * @qc: pointer to &struct v4l2_queryctrl + * + * If hdl == NULL then they will all return -EINVAL. + */ +int v4l2_queryctrl(struct v4l2_ctrl_handler *hdl, struct v4l2_queryctrl *qc); + +/** + * v4l2_query_ext_ctrl - Helper function to implement + * :ref:`VIDIOC_QUERY_EXT_CTRL <vidioc_queryctrl>` ioctl + * + * @hdl: pointer to &struct v4l2_ctrl_handler + * @qc: pointer to &struct v4l2_query_ext_ctrl + * + * If hdl == NULL then they will all return -EINVAL. + */ +int v4l2_query_ext_ctrl(struct v4l2_ctrl_handler *hdl, + struct v4l2_query_ext_ctrl *qc); + +/** + * v4l2_querymenu - Helper function to implement + * :ref:`VIDIOC_QUERYMENU <vidioc_queryctrl>` ioctl + * + * @hdl: pointer to &struct v4l2_ctrl_handler + * @qm: pointer to &struct v4l2_querymenu + * + * If hdl == NULL then they will all return -EINVAL. + */ +int v4l2_querymenu(struct v4l2_ctrl_handler *hdl, struct v4l2_querymenu *qm); + +/** + * v4l2_g_ctrl - Helper function to implement + * :ref:`VIDIOC_G_CTRL <vidioc_g_ctrl>` ioctl + * + * @hdl: pointer to &struct v4l2_ctrl_handler + * @ctrl: pointer to &struct v4l2_control + * + * If hdl == NULL then they will all return -EINVAL. + */ +int v4l2_g_ctrl(struct v4l2_ctrl_handler *hdl, struct v4l2_control *ctrl); + +/** + * v4l2_s_ctrl - Helper function to implement + * :ref:`VIDIOC_S_CTRL <vidioc_g_ctrl>` ioctl + * + * @fh: pointer to &struct v4l2_fh + * @hdl: pointer to &struct v4l2_ctrl_handler + * + * @ctrl: pointer to &struct v4l2_control + * + * If hdl == NULL then they will all return -EINVAL. + */ +int v4l2_s_ctrl(struct v4l2_fh *fh, struct v4l2_ctrl_handler *hdl, + struct v4l2_control *ctrl); + +/** + * v4l2_g_ext_ctrls - Helper function to implement + * :ref:`VIDIOC_G_EXT_CTRLS <vidioc_g_ext_ctrls>` ioctl + * + * @hdl: pointer to &struct v4l2_ctrl_handler + * @vdev: pointer to &struct video_device + * @mdev: pointer to &struct media_device + * @c: pointer to &struct v4l2_ext_controls + * + * If hdl == NULL then they will all return -EINVAL. + */ +int v4l2_g_ext_ctrls(struct v4l2_ctrl_handler *hdl, struct video_device *vdev, + struct media_device *mdev, struct v4l2_ext_controls *c); + +/** + * v4l2_try_ext_ctrls - Helper function to implement + * :ref:`VIDIOC_TRY_EXT_CTRLS <vidioc_g_ext_ctrls>` ioctl + * + * @hdl: pointer to &struct v4l2_ctrl_handler + * @vdev: pointer to &struct video_device + * @mdev: pointer to &struct media_device + * @c: pointer to &struct v4l2_ext_controls + * + * If hdl == NULL then they will all return -EINVAL. + */ +int v4l2_try_ext_ctrls(struct v4l2_ctrl_handler *hdl, + struct video_device *vdev, + struct media_device *mdev, + struct v4l2_ext_controls *c); + +/** + * v4l2_s_ext_ctrls - Helper function to implement + * :ref:`VIDIOC_S_EXT_CTRLS <vidioc_g_ext_ctrls>` ioctl + * + * @fh: pointer to &struct v4l2_fh + * @hdl: pointer to &struct v4l2_ctrl_handler + * @vdev: pointer to &struct video_device + * @mdev: pointer to &struct media_device + * @c: pointer to &struct v4l2_ext_controls + * + * If hdl == NULL then they will all return -EINVAL. + */ +int v4l2_s_ext_ctrls(struct v4l2_fh *fh, struct v4l2_ctrl_handler *hdl, + struct video_device *vdev, + struct media_device *mdev, + struct v4l2_ext_controls *c); + +/** + * v4l2_ctrl_subdev_subscribe_event - Helper function to implement + * as a &struct v4l2_subdev_core_ops subscribe_event function + * that just subscribes control events. + * + * @sd: pointer to &struct v4l2_subdev + * @fh: pointer to &struct v4l2_fh + * @sub: pointer to &struct v4l2_event_subscription + */ +int v4l2_ctrl_subdev_subscribe_event(struct v4l2_subdev *sd, struct v4l2_fh *fh, + struct v4l2_event_subscription *sub); + +/** + * v4l2_ctrl_subdev_log_status - Log all controls owned by subdev's control + * handler. + * + * @sd: pointer to &struct v4l2_subdev + */ +int v4l2_ctrl_subdev_log_status(struct v4l2_subdev *sd); + +/** + * v4l2_ctrl_new_fwnode_properties() - Register controls for the device + * properties + * + * @hdl: pointer to &struct v4l2_ctrl_handler to register controls on + * @ctrl_ops: pointer to &struct v4l2_ctrl_ops to register controls with + * @p: pointer to &struct v4l2_fwnode_device_properties + * + * This function registers controls associated to device properties, using the + * property values contained in @p parameter, if the property has been set to + * a value. + * + * Currently the following v4l2 controls are parsed and registered: + * - V4L2_CID_CAMERA_ORIENTATION + * - V4L2_CID_CAMERA_SENSOR_ROTATION; + * + * Controls already registered by the caller with the @hdl control handler are + * not overwritten. Callers should register the controls they want to handle + * themselves before calling this function. + * + * Return: 0 on success, a negative error code on failure. + */ +int v4l2_ctrl_new_fwnode_properties(struct v4l2_ctrl_handler *hdl, + const struct v4l2_ctrl_ops *ctrl_ops, + const struct v4l2_fwnode_device_properties *p); +#endif diff --git a/include/media/v4l2-dev.h b/include/media/v4l2-dev.h new file mode 100644 index 000000000..ad2d41952 --- /dev/null +++ b/include/media/v4l2-dev.h @@ -0,0 +1,543 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * + * V 4 L 2 D R I V E R H E L P E R A P I + * + * Moved from videodev2.h + * + * Some commonly needed functions for drivers (v4l2-common.o module) + */ +#ifndef _V4L2_DEV_H +#define _V4L2_DEV_H + +#include <linux/poll.h> +#include <linux/fs.h> +#include <linux/device.h> +#include <linux/cdev.h> +#include <linux/mutex.h> +#include <linux/videodev2.h> + +#include <media/media-entity.h> + +#define VIDEO_MAJOR 81 + +/** + * enum vfl_devnode_type - type of V4L2 device node + * + * @VFL_TYPE_VIDEO: for video input/output devices + * @VFL_TYPE_VBI: for vertical blank data (i.e. closed captions, teletext) + * @VFL_TYPE_RADIO: for radio tuners + * @VFL_TYPE_SUBDEV: for V4L2 subdevices + * @VFL_TYPE_SDR: for Software Defined Radio tuners + * @VFL_TYPE_TOUCH: for touch sensors + * @VFL_TYPE_MAX: number of VFL types, must always be last in the enum + */ +enum vfl_devnode_type { + VFL_TYPE_VIDEO, + VFL_TYPE_VBI, + VFL_TYPE_RADIO, + VFL_TYPE_SUBDEV, + VFL_TYPE_SDR, + VFL_TYPE_TOUCH, + VFL_TYPE_MAX /* Shall be the last one */ +}; + +/** + * enum vfl_direction - Identifies if a &struct video_device corresponds + * to a receiver, a transmitter or a mem-to-mem device. + * + * @VFL_DIR_RX: device is a receiver. + * @VFL_DIR_TX: device is a transmitter. + * @VFL_DIR_M2M: device is a memory to memory device. + * + * Note: Ignored if &enum vfl_devnode_type is %VFL_TYPE_SUBDEV. + */ +enum vfl_devnode_direction { + VFL_DIR_RX, + VFL_DIR_TX, + VFL_DIR_M2M, +}; + +struct v4l2_ioctl_callbacks; +struct video_device; +struct v4l2_device; +struct v4l2_ctrl_handler; + +/** + * enum v4l2_video_device_flags - Flags used by &struct video_device + * + * @V4L2_FL_REGISTERED: + * indicates that a &struct video_device is registered. + * Drivers can clear this flag if they want to block all future + * device access. It is cleared by video_unregister_device. + * @V4L2_FL_USES_V4L2_FH: + * indicates that file->private_data points to &struct v4l2_fh. + * This flag is set by the core when v4l2_fh_init() is called. + * All new drivers should use it. + * @V4L2_FL_QUIRK_INVERTED_CROP: + * some old M2M drivers use g/s_crop/cropcap incorrectly: crop and + * compose are swapped. If this flag is set, then the selection + * targets are swapped in the g/s_crop/cropcap functions in v4l2-ioctl.c. + * This allows those drivers to correctly implement the selection API, + * but the old crop API will still work as expected in order to preserve + * backwards compatibility. + * Never set this flag for new drivers. + * @V4L2_FL_SUBDEV_RO_DEVNODE: + * indicates that the video device node is registered in read-only mode. + * The flag only applies to device nodes registered for sub-devices, it is + * set by the core when the sub-devices device nodes are registered with + * v4l2_device_register_ro_subdev_nodes() and used by the sub-device ioctl + * handler to restrict access to some ioctl calls. + */ +enum v4l2_video_device_flags { + V4L2_FL_REGISTERED = 0, + V4L2_FL_USES_V4L2_FH = 1, + V4L2_FL_QUIRK_INVERTED_CROP = 2, + V4L2_FL_SUBDEV_RO_DEVNODE = 3, +}; + +/* Priority helper functions */ + +/** + * struct v4l2_prio_state - stores the priority states + * + * @prios: array with elements to store the array priorities + * + * + * .. note:: + * The size of @prios array matches the number of priority types defined + * by enum &v4l2_priority. + */ +struct v4l2_prio_state { + atomic_t prios[4]; +}; + +/** + * v4l2_prio_init - initializes a struct v4l2_prio_state + * + * @global: pointer to &struct v4l2_prio_state + */ +void v4l2_prio_init(struct v4l2_prio_state *global); + +/** + * v4l2_prio_change - changes the v4l2 file handler priority + * + * @global: pointer to the &struct v4l2_prio_state of the device node. + * @local: pointer to the desired priority, as defined by enum &v4l2_priority + * @new: Priority type requested, as defined by enum &v4l2_priority. + * + * .. note:: + * This function should be used only by the V4L2 core. + */ +int v4l2_prio_change(struct v4l2_prio_state *global, enum v4l2_priority *local, + enum v4l2_priority new); + +/** + * v4l2_prio_open - Implements the priority logic for a file handler open + * + * @global: pointer to the &struct v4l2_prio_state of the device node. + * @local: pointer to the desired priority, as defined by enum &v4l2_priority + * + * .. note:: + * This function should be used only by the V4L2 core. + */ +void v4l2_prio_open(struct v4l2_prio_state *global, enum v4l2_priority *local); + +/** + * v4l2_prio_close - Implements the priority logic for a file handler close + * + * @global: pointer to the &struct v4l2_prio_state of the device node. + * @local: priority to be released, as defined by enum &v4l2_priority + * + * .. note:: + * This function should be used only by the V4L2 core. + */ +void v4l2_prio_close(struct v4l2_prio_state *global, enum v4l2_priority local); + +/** + * v4l2_prio_max - Return the maximum priority, as stored at the @global array. + * + * @global: pointer to the &struct v4l2_prio_state of the device node. + * + * .. note:: + * This function should be used only by the V4L2 core. + */ +enum v4l2_priority v4l2_prio_max(struct v4l2_prio_state *global); + +/** + * v4l2_prio_check - Implements the priority logic for a file handler close + * + * @global: pointer to the &struct v4l2_prio_state of the device node. + * @local: desired priority, as defined by enum &v4l2_priority local + * + * .. note:: + * This function should be used only by the V4L2 core. + */ +int v4l2_prio_check(struct v4l2_prio_state *global, enum v4l2_priority local); + +/** + * struct v4l2_file_operations - fs operations used by a V4L2 device + * + * @owner: pointer to struct module + * @read: operations needed to implement the read() syscall + * @write: operations needed to implement the write() syscall + * @poll: operations needed to implement the poll() syscall + * @unlocked_ioctl: operations needed to implement the ioctl() syscall + * @compat_ioctl32: operations needed to implement the ioctl() syscall for + * the special case where the Kernel uses 64 bits instructions, but + * the userspace uses 32 bits. + * @get_unmapped_area: called by the mmap() syscall, used when %!CONFIG_MMU + * @mmap: operations needed to implement the mmap() syscall + * @open: operations needed to implement the open() syscall + * @release: operations needed to implement the release() syscall + * + * .. note:: + * + * Those operations are used to implemente the fs struct file_operations + * at the V4L2 drivers. The V4L2 core overrides the fs ops with some + * extra logic needed by the subsystem. + */ +struct v4l2_file_operations { + struct module *owner; + ssize_t (*read) (struct file *, char __user *, size_t, loff_t *); + ssize_t (*write) (struct file *, const char __user *, size_t, loff_t *); + __poll_t (*poll) (struct file *, struct poll_table_struct *); + long (*unlocked_ioctl) (struct file *, unsigned int, unsigned long); +#ifdef CONFIG_COMPAT + long (*compat_ioctl32) (struct file *, unsigned int, unsigned long); +#endif + unsigned long (*get_unmapped_area) (struct file *, unsigned long, + unsigned long, unsigned long, unsigned long); + int (*mmap) (struct file *, struct vm_area_struct *); + int (*open) (struct file *); + int (*release) (struct file *); +}; + +/* + * Newer version of video_device, handled by videodev2.c + * This version moves redundant code from video device code to + * the common handler + */ + +/** + * struct video_device - Structure used to create and manage the V4L2 device + * nodes. + * + * @entity: &struct media_entity + * @intf_devnode: pointer to &struct media_intf_devnode + * @pipe: &struct media_pipeline + * @fops: pointer to &struct v4l2_file_operations for the video device + * @device_caps: device capabilities as used in v4l2_capabilities + * @dev: &struct device for the video device + * @cdev: character device + * @v4l2_dev: pointer to &struct v4l2_device parent + * @dev_parent: pointer to &struct device parent + * @ctrl_handler: Control handler associated with this device node. + * May be NULL. + * @queue: &struct vb2_queue associated with this device node. May be NULL. + * @prio: pointer to &struct v4l2_prio_state with device's Priority state. + * If NULL, then v4l2_dev->prio will be used. + * @name: video device name + * @vfl_type: V4L device type, as defined by &enum vfl_devnode_type + * @vfl_dir: V4L receiver, transmitter or m2m + * @minor: device node 'minor'. It is set to -1 if the registration failed + * @num: number of the video device node + * @flags: video device flags. Use bitops to set/clear/test flags. + * Contains a set of &enum v4l2_video_device_flags. + * @index: attribute to differentiate multiple indices on one physical device + * @fh_lock: Lock for all v4l2_fhs + * @fh_list: List of &struct v4l2_fh + * @dev_debug: Internal device debug flags, not for use by drivers + * @tvnorms: Supported tv norms + * + * @release: video device release() callback + * @ioctl_ops: pointer to &struct v4l2_ioctl_ops with ioctl callbacks + * + * @valid_ioctls: bitmap with the valid ioctls for this device + * @lock: pointer to &struct mutex serialization lock + * + * .. note:: + * Only set @dev_parent if that can't be deduced from @v4l2_dev. + */ + +struct video_device +{ +#if defined(CONFIG_MEDIA_CONTROLLER) + struct media_entity entity; + struct media_intf_devnode *intf_devnode; + struct media_pipeline pipe; +#endif + const struct v4l2_file_operations *fops; + + u32 device_caps; + + /* sysfs */ + struct device dev; + struct cdev *cdev; + + struct v4l2_device *v4l2_dev; + struct device *dev_parent; + + struct v4l2_ctrl_handler *ctrl_handler; + + struct vb2_queue *queue; + + struct v4l2_prio_state *prio; + + /* device info */ + char name[32]; + enum vfl_devnode_type vfl_type; + enum vfl_devnode_direction vfl_dir; + int minor; + u16 num; + unsigned long flags; + int index; + + /* V4L2 file handles */ + spinlock_t fh_lock; + struct list_head fh_list; + + int dev_debug; + + v4l2_std_id tvnorms; + + /* callbacks */ + void (*release)(struct video_device *vdev); + const struct v4l2_ioctl_ops *ioctl_ops; + DECLARE_BITMAP(valid_ioctls, BASE_VIDIOC_PRIVATE); + + struct mutex *lock; +}; + +/** + * media_entity_to_video_device - Returns a &struct video_device from + * the &struct media_entity embedded on it. + * + * @__entity: pointer to &struct media_entity + */ +#define media_entity_to_video_device(__entity) \ + container_of(__entity, struct video_device, entity) + +/** + * to_video_device - Returns a &struct video_device from the + * &struct device embedded on it. + * + * @cd: pointer to &struct device + */ +#define to_video_device(cd) container_of(cd, struct video_device, dev) + +/** + * __video_register_device - register video4linux devices + * + * @vdev: struct video_device to register + * @type: type of device to register, as defined by &enum vfl_devnode_type + * @nr: which device node number is desired: + * (0 == /dev/video0, 1 == /dev/video1, ..., -1 == first free) + * @warn_if_nr_in_use: warn if the desired device node number + * was already in use and another number was chosen instead. + * @owner: module that owns the video device node + * + * The registration code assigns minor numbers and device node numbers + * based on the requested type and registers the new device node with + * the kernel. + * + * This function assumes that struct video_device was zeroed when it + * was allocated and does not contain any stale date. + * + * An error is returned if no free minor or device node number could be + * found, or if the registration of the device node failed. + * + * Returns 0 on success. + * + * .. note:: + * + * This function is meant to be used only inside the V4L2 core. + * Drivers should use video_register_device() or + * video_register_device_no_warn(). + */ +int __must_check __video_register_device(struct video_device *vdev, + enum vfl_devnode_type type, + int nr, int warn_if_nr_in_use, + struct module *owner); + +/** + * video_register_device - register video4linux devices + * + * @vdev: struct video_device to register + * @type: type of device to register, as defined by &enum vfl_devnode_type + * @nr: which device node number is desired: + * (0 == /dev/video0, 1 == /dev/video1, ..., -1 == first free) + * + * Internally, it calls __video_register_device(). Please see its + * documentation for more details. + * + * .. note:: + * if video_register_device fails, the release() callback of + * &struct video_device structure is *not* called, so the caller + * is responsible for freeing any data. Usually that means that + * you video_device_release() should be called on failure. + */ +static inline int __must_check video_register_device(struct video_device *vdev, + enum vfl_devnode_type type, + int nr) +{ + return __video_register_device(vdev, type, nr, 1, vdev->fops->owner); +} + +/** + * video_register_device_no_warn - register video4linux devices + * + * @vdev: struct video_device to register + * @type: type of device to register, as defined by &enum vfl_devnode_type + * @nr: which device node number is desired: + * (0 == /dev/video0, 1 == /dev/video1, ..., -1 == first free) + * + * This function is identical to video_register_device() except that no + * warning is issued if the desired device node number was already in use. + * + * Internally, it calls __video_register_device(). Please see its + * documentation for more details. + * + * .. note:: + * if video_register_device fails, the release() callback of + * &struct video_device structure is *not* called, so the caller + * is responsible for freeing any data. Usually that means that + * you video_device_release() should be called on failure. + */ +static inline int __must_check +video_register_device_no_warn(struct video_device *vdev, + enum vfl_devnode_type type, int nr) +{ + return __video_register_device(vdev, type, nr, 0, vdev->fops->owner); +} + +/** + * video_unregister_device - Unregister video devices. + * + * @vdev: &struct video_device to register + * + * Does nothing if vdev == NULL or if video_is_registered() returns false. + */ +void video_unregister_device(struct video_device *vdev); + +/** + * video_device_alloc - helper function to alloc &struct video_device + * + * Returns NULL if %-ENOMEM or a &struct video_device on success. + */ +struct video_device * __must_check video_device_alloc(void); + +/** + * video_device_release - helper function to release &struct video_device + * + * @vdev: pointer to &struct video_device + * + * Can also be used for video_device->release\(\). + */ +void video_device_release(struct video_device *vdev); + +/** + * video_device_release_empty - helper function to implement the + * video_device->release\(\) callback. + * + * @vdev: pointer to &struct video_device + * + * This release function does nothing. + * + * It should be used when the video_device is a static global struct. + * + * .. note:: + * Having a static video_device is a dubious construction at best. + */ +void video_device_release_empty(struct video_device *vdev); + +/** + * v4l2_disable_ioctl- mark that a given command isn't implemented. + * shouldn't use core locking + * + * @vdev: pointer to &struct video_device + * @cmd: ioctl command + * + * This function allows drivers to provide just one v4l2_ioctl_ops struct, but + * disable ioctls based on the specific card that is actually found. + * + * .. note:: + * + * This must be called before video_register_device. + * See also the comments for determine_valid_ioctls(). + */ +static inline void v4l2_disable_ioctl(struct video_device *vdev, + unsigned int cmd) +{ + if (_IOC_NR(cmd) < BASE_VIDIOC_PRIVATE) + set_bit(_IOC_NR(cmd), vdev->valid_ioctls); +} + +/** + * video_get_drvdata - gets private data from &struct video_device. + * + * @vdev: pointer to &struct video_device + * + * returns a pointer to the private data + */ +static inline void *video_get_drvdata(struct video_device *vdev) +{ + return dev_get_drvdata(&vdev->dev); +} + +/** + * video_set_drvdata - sets private data from &struct video_device. + * + * @vdev: pointer to &struct video_device + * @data: private data pointer + */ +static inline void video_set_drvdata(struct video_device *vdev, void *data) +{ + dev_set_drvdata(&vdev->dev, data); +} + +/** + * video_devdata - gets &struct video_device from struct file. + * + * @file: pointer to struct file + */ +struct video_device *video_devdata(struct file *file); + +/** + * video_drvdata - gets private data from &struct video_device using the + * struct file. + * + * @file: pointer to struct file + * + * This is function combines both video_get_drvdata() and video_devdata() + * as this is used very often. + */ +static inline void *video_drvdata(struct file *file) +{ + return video_get_drvdata(video_devdata(file)); +} + +/** + * video_device_node_name - returns the video device name + * + * @vdev: pointer to &struct video_device + * + * Returns the device name string + */ +static inline const char *video_device_node_name(struct video_device *vdev) +{ + return dev_name(&vdev->dev); +} + +/** + * video_is_registered - returns true if the &struct video_device is registered. + * + * + * @vdev: pointer to &struct video_device + */ +static inline int video_is_registered(struct video_device *vdev) +{ + return test_bit(V4L2_FL_REGISTERED, &vdev->flags); +} + +#endif /* _V4L2_DEV_H */ diff --git a/include/media/v4l2-device.h b/include/media/v4l2-device.h new file mode 100644 index 000000000..64ec4de94 --- /dev/null +++ b/include/media/v4l2-device.h @@ -0,0 +1,568 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + V4L2 device support header. + + Copyright (C) 2008 Hans Verkuil <hverkuil@xs4all.nl> + + */ + +#ifndef _V4L2_DEVICE_H +#define _V4L2_DEVICE_H + +#include <media/media-device.h> +#include <media/v4l2-subdev.h> +#include <media/v4l2-dev.h> + +#define V4L2_DEVICE_NAME_SIZE (20 + 16) + +struct v4l2_ctrl_handler; + +/** + * struct v4l2_device - main struct to for V4L2 device drivers + * + * @dev: pointer to struct device. + * @mdev: pointer to struct media_device, may be NULL. + * @subdevs: used to keep track of the registered subdevs + * @lock: lock this struct; can be used by the driver as well + * if this struct is embedded into a larger struct. + * @name: unique device name, by default the driver name + bus ID + * @notify: notify operation called by some sub-devices. + * @ctrl_handler: The control handler. May be %NULL. + * @prio: Device's priority state + * @ref: Keep track of the references to this struct. + * @release: Release function that is called when the ref count + * goes to 0. + * + * Each instance of a V4L2 device should create the v4l2_device struct, + * either stand-alone or embedded in a larger struct. + * + * It allows easy access to sub-devices (see v4l2-subdev.h) and provides + * basic V4L2 device-level support. + * + * .. note:: + * + * #) @dev->driver_data points to this struct. + * #) @dev might be %NULL if there is no parent device + */ +struct v4l2_device { + struct device *dev; + struct media_device *mdev; + struct list_head subdevs; + spinlock_t lock; + char name[V4L2_DEVICE_NAME_SIZE]; + void (*notify)(struct v4l2_subdev *sd, + unsigned int notification, void *arg); + struct v4l2_ctrl_handler *ctrl_handler; + struct v4l2_prio_state prio; + struct kref ref; + void (*release)(struct v4l2_device *v4l2_dev); +}; + +/** + * v4l2_device_get - gets a V4L2 device reference + * + * @v4l2_dev: pointer to struct &v4l2_device + * + * This is an ancillary routine meant to increment the usage for the + * struct &v4l2_device pointed by @v4l2_dev. + */ +static inline void v4l2_device_get(struct v4l2_device *v4l2_dev) +{ + kref_get(&v4l2_dev->ref); +} + +/** + * v4l2_device_put - puts a V4L2 device reference + * + * @v4l2_dev: pointer to struct &v4l2_device + * + * This is an ancillary routine meant to decrement the usage for the + * struct &v4l2_device pointed by @v4l2_dev. + */ +int v4l2_device_put(struct v4l2_device *v4l2_dev); + +/** + * v4l2_device_register - Initialize v4l2_dev and make @dev->driver_data + * point to @v4l2_dev. + * + * @dev: pointer to struct &device + * @v4l2_dev: pointer to struct &v4l2_device + * + * .. note:: + * @dev may be %NULL in rare cases (ISA devices). + * In such case the caller must fill in the @v4l2_dev->name field + * before calling this function. + */ +int __must_check v4l2_device_register(struct device *dev, + struct v4l2_device *v4l2_dev); + +/** + * v4l2_device_set_name - Optional function to initialize the + * name field of struct &v4l2_device + * + * @v4l2_dev: pointer to struct &v4l2_device + * @basename: base name for the device name + * @instance: pointer to a static atomic_t var with the instance usage for + * the device driver. + * + * v4l2_device_set_name() initializes the name field of struct &v4l2_device + * using the driver name and a driver-global atomic_t instance. + * + * This function will increment the instance counter and returns the + * instance value used in the name. + * + * Example: + * + * static atomic_t drv_instance = ATOMIC_INIT(0); + * + * ... + * + * instance = v4l2_device_set_name(&\ v4l2_dev, "foo", &\ drv_instance); + * + * The first time this is called the name field will be set to foo0 and + * this function returns 0. If the name ends with a digit (e.g. cx18), + * then the name will be set to cx18-0 since cx180 would look really odd. + */ +int v4l2_device_set_name(struct v4l2_device *v4l2_dev, const char *basename, + atomic_t *instance); + +/** + * v4l2_device_disconnect - Change V4L2 device state to disconnected. + * + * @v4l2_dev: pointer to struct v4l2_device + * + * Should be called when the USB parent disconnects. + * Since the parent disappears, this ensures that @v4l2_dev doesn't have + * an invalid parent pointer. + * + * .. note:: This function sets @v4l2_dev->dev to NULL. + */ +void v4l2_device_disconnect(struct v4l2_device *v4l2_dev); + +/** + * v4l2_device_unregister - Unregister all sub-devices and any other + * resources related to @v4l2_dev. + * + * @v4l2_dev: pointer to struct v4l2_device + */ +void v4l2_device_unregister(struct v4l2_device *v4l2_dev); + +/** + * v4l2_device_register_subdev - Registers a subdev with a v4l2 device. + * + * @v4l2_dev: pointer to struct &v4l2_device + * @sd: pointer to &struct v4l2_subdev + * + * While registered, the subdev module is marked as in-use. + * + * An error is returned if the module is no longer loaded on any attempts + * to register it. + */ +int __must_check v4l2_device_register_subdev(struct v4l2_device *v4l2_dev, + struct v4l2_subdev *sd); + +/** + * v4l2_device_unregister_subdev - Unregisters a subdev with a v4l2 device. + * + * @sd: pointer to &struct v4l2_subdev + * + * .. note :: + * + * Can also be called if the subdev wasn't registered. In such + * case, it will do nothing. + */ +void v4l2_device_unregister_subdev(struct v4l2_subdev *sd); + +/** + * __v4l2_device_register_ro_subdev_nodes - Registers device nodes for + * all subdevs of the v4l2 device that are marked with the + * %V4L2_SUBDEV_FL_HAS_DEVNODE flag. + * + * @v4l2_dev: pointer to struct v4l2_device + * @read_only: subdevices read-only flag. True to register the subdevices + * device nodes in read-only mode, false to allow full access to the + * subdevice userspace API. + */ +int __must_check +__v4l2_device_register_subdev_nodes(struct v4l2_device *v4l2_dev, + bool read_only); + +/** + * v4l2_device_register_subdev_nodes - Registers subdevices device nodes with + * unrestricted access to the subdevice userspace operations + * + * Internally calls __v4l2_device_register_subdev_nodes(). See its documentation + * for more details. + * + * @v4l2_dev: pointer to struct v4l2_device + */ +static inline int __must_check +v4l2_device_register_subdev_nodes(struct v4l2_device *v4l2_dev) +{ +#if defined(CONFIG_VIDEO_V4L2_SUBDEV_API) + return __v4l2_device_register_subdev_nodes(v4l2_dev, false); +#else + return 0; +#endif +} + +/** + * v4l2_device_register_ro_subdev_nodes - Registers subdevices device nodes + * in read-only mode + * + * Internally calls __v4l2_device_register_subdev_nodes(). See its documentation + * for more details. + * + * @v4l2_dev: pointer to struct v4l2_device + */ +static inline int __must_check +v4l2_device_register_ro_subdev_nodes(struct v4l2_device *v4l2_dev) +{ +#if defined(CONFIG_VIDEO_V4L2_SUBDEV_API) + return __v4l2_device_register_subdev_nodes(v4l2_dev, true); +#else + return 0; +#endif +} + +/** + * v4l2_subdev_notify - Sends a notification to v4l2_device. + * + * @sd: pointer to &struct v4l2_subdev + * @notification: type of notification. Please notice that the notification + * type is driver-specific. + * @arg: arguments for the notification. Those are specific to each + * notification type. + */ +static inline void v4l2_subdev_notify(struct v4l2_subdev *sd, + unsigned int notification, void *arg) +{ + if (sd && sd->v4l2_dev && sd->v4l2_dev->notify) + sd->v4l2_dev->notify(sd, notification, arg); +} + +/** + * v4l2_device_supports_requests - Test if requests are supported. + * + * @v4l2_dev: pointer to struct v4l2_device + */ +static inline bool v4l2_device_supports_requests(struct v4l2_device *v4l2_dev) +{ + return v4l2_dev->mdev && v4l2_dev->mdev->ops && + v4l2_dev->mdev->ops->req_queue; +} + +/* Helper macros to iterate over all subdevs. */ + +/** + * v4l2_device_for_each_subdev - Helper macro that interates over all + * sub-devices of a given &v4l2_device. + * + * @sd: pointer that will be filled by the macro with all + * &struct v4l2_subdev pointer used as an iterator by the loop. + * @v4l2_dev: &struct v4l2_device owning the sub-devices to iterate over. + * + * This macro iterates over all sub-devices owned by the @v4l2_dev device. + * It acts as a for loop iterator and executes the next statement with + * the @sd variable pointing to each sub-device in turn. + */ +#define v4l2_device_for_each_subdev(sd, v4l2_dev) \ + list_for_each_entry(sd, &(v4l2_dev)->subdevs, list) + +/** + * __v4l2_device_call_subdevs_p - Calls the specified operation for + * all subdevs matching the condition. + * + * @v4l2_dev: &struct v4l2_device owning the sub-devices to iterate over. + * @sd: pointer that will be filled by the macro with all + * &struct v4l2_subdev pointer used as an iterator by the loop. + * @cond: condition to be match + * @o: name of the element at &struct v4l2_subdev_ops that contains @f. + * Each element there groups a set of operations functions. + * @f: operation function that will be called if @cond matches. + * The operation functions are defined in groups, according to + * each element at &struct v4l2_subdev_ops. + * @args: arguments for @f. + * + * Ignore any errors. + * + * Note: subdevs cannot be added or deleted while walking + * the subdevs list. + */ +#define __v4l2_device_call_subdevs_p(v4l2_dev, sd, cond, o, f, args...) \ + do { \ + list_for_each_entry((sd), &(v4l2_dev)->subdevs, list) \ + if ((cond) && (sd)->ops->o && (sd)->ops->o->f) \ + (sd)->ops->o->f((sd) , ##args); \ + } while (0) + +/** + * __v4l2_device_call_subdevs - Calls the specified operation for + * all subdevs matching the condition. + * + * @v4l2_dev: &struct v4l2_device owning the sub-devices to iterate over. + * @cond: condition to be match + * @o: name of the element at &struct v4l2_subdev_ops that contains @f. + * Each element there groups a set of operations functions. + * @f: operation function that will be called if @cond matches. + * The operation functions are defined in groups, according to + * each element at &struct v4l2_subdev_ops. + * @args: arguments for @f. + * + * Ignore any errors. + * + * Note: subdevs cannot be added or deleted while walking + * the subdevs list. + */ +#define __v4l2_device_call_subdevs(v4l2_dev, cond, o, f, args...) \ + do { \ + struct v4l2_subdev *__sd; \ + \ + __v4l2_device_call_subdevs_p(v4l2_dev, __sd, cond, o, \ + f , ##args); \ + } while (0) + +/** + * __v4l2_device_call_subdevs_until_err_p - Calls the specified operation for + * all subdevs matching the condition. + * + * @v4l2_dev: &struct v4l2_device owning the sub-devices to iterate over. + * @sd: pointer that will be filled by the macro with all + * &struct v4l2_subdev sub-devices associated with @v4l2_dev. + * @cond: condition to be match + * @o: name of the element at &struct v4l2_subdev_ops that contains @f. + * Each element there groups a set of operations functions. + * @f: operation function that will be called if @cond matches. + * The operation functions are defined in groups, according to + * each element at &struct v4l2_subdev_ops. + * @args: arguments for @f. + * + * Return: + * + * If the operation returns an error other than 0 or ``-ENOIOCTLCMD`` + * for any subdevice, then abort and return with that error code, zero + * otherwise. + * + * Note: subdevs cannot be added or deleted while walking + * the subdevs list. + */ +#define __v4l2_device_call_subdevs_until_err_p(v4l2_dev, sd, cond, o, f, args...) \ +({ \ + long __err = 0; \ + \ + list_for_each_entry((sd), &(v4l2_dev)->subdevs, list) { \ + if ((cond) && (sd)->ops->o && (sd)->ops->o->f) \ + __err = (sd)->ops->o->f((sd) , ##args); \ + if (__err && __err != -ENOIOCTLCMD) \ + break; \ + } \ + (__err == -ENOIOCTLCMD) ? 0 : __err; \ +}) + +/** + * __v4l2_device_call_subdevs_until_err - Calls the specified operation for + * all subdevs matching the condition. + * + * @v4l2_dev: &struct v4l2_device owning the sub-devices to iterate over. + * @cond: condition to be match + * @o: name of the element at &struct v4l2_subdev_ops that contains @f. + * Each element there groups a set of operations functions. + * @f: operation function that will be called if @cond matches. + * The operation functions are defined in groups, according to + * each element at &struct v4l2_subdev_ops. + * @args: arguments for @f. + * + * Return: + * + * If the operation returns an error other than 0 or ``-ENOIOCTLCMD`` + * for any subdevice, then abort and return with that error code, + * zero otherwise. + * + * Note: subdevs cannot be added or deleted while walking + * the subdevs list. + */ +#define __v4l2_device_call_subdevs_until_err(v4l2_dev, cond, o, f, args...) \ +({ \ + struct v4l2_subdev *__sd; \ + __v4l2_device_call_subdevs_until_err_p(v4l2_dev, __sd, cond, o, \ + f , ##args); \ +}) + +/** + * v4l2_device_call_all - Calls the specified operation for + * all subdevs matching the &v4l2_subdev.grp_id, as assigned + * by the bridge driver. + * + * @v4l2_dev: &struct v4l2_device owning the sub-devices to iterate over. + * @grpid: &struct v4l2_subdev->grp_id group ID to match. + * Use 0 to match them all. + * @o: name of the element at &struct v4l2_subdev_ops that contains @f. + * Each element there groups a set of operations functions. + * @f: operation function that will be called if @cond matches. + * The operation functions are defined in groups, according to + * each element at &struct v4l2_subdev_ops. + * @args: arguments for @f. + * + * Ignore any errors. + * + * Note: subdevs cannot be added or deleted while walking + * the subdevs list. + */ +#define v4l2_device_call_all(v4l2_dev, grpid, o, f, args...) \ + do { \ + struct v4l2_subdev *__sd; \ + \ + __v4l2_device_call_subdevs_p(v4l2_dev, __sd, \ + (grpid) == 0 || __sd->grp_id == (grpid), o, f , \ + ##args); \ + } while (0) + +/** + * v4l2_device_call_until_err - Calls the specified operation for + * all subdevs matching the &v4l2_subdev.grp_id, as assigned + * by the bridge driver, until an error occurs. + * + * @v4l2_dev: &struct v4l2_device owning the sub-devices to iterate over. + * @grpid: &struct v4l2_subdev->grp_id group ID to match. + * Use 0 to match them all. + * @o: name of the element at &struct v4l2_subdev_ops that contains @f. + * Each element there groups a set of operations functions. + * @f: operation function that will be called if @cond matches. + * The operation functions are defined in groups, according to + * each element at &struct v4l2_subdev_ops. + * @args: arguments for @f. + * + * Return: + * + * If the operation returns an error other than 0 or ``-ENOIOCTLCMD`` + * for any subdevice, then abort and return with that error code, + * zero otherwise. + * + * Note: subdevs cannot be added or deleted while walking + * the subdevs list. + */ +#define v4l2_device_call_until_err(v4l2_dev, grpid, o, f, args...) \ +({ \ + struct v4l2_subdev *__sd; \ + __v4l2_device_call_subdevs_until_err_p(v4l2_dev, __sd, \ + (grpid) == 0 || __sd->grp_id == (grpid), o, f , \ + ##args); \ +}) + +/** + * v4l2_device_mask_call_all - Calls the specified operation for + * all subdevices where a group ID matches a specified bitmask. + * + * @v4l2_dev: &struct v4l2_device owning the sub-devices to iterate over. + * @grpmsk: bitmask to be checked against &struct v4l2_subdev->grp_id + * group ID to be matched. Use 0 to match them all. + * @o: name of the element at &struct v4l2_subdev_ops that contains @f. + * Each element there groups a set of operations functions. + * @f: operation function that will be called if @cond matches. + * The operation functions are defined in groups, according to + * each element at &struct v4l2_subdev_ops. + * @args: arguments for @f. + * + * Ignore any errors. + * + * Note: subdevs cannot be added or deleted while walking + * the subdevs list. + */ +#define v4l2_device_mask_call_all(v4l2_dev, grpmsk, o, f, args...) \ + do { \ + struct v4l2_subdev *__sd; \ + \ + __v4l2_device_call_subdevs_p(v4l2_dev, __sd, \ + (grpmsk) == 0 || (__sd->grp_id & (grpmsk)), o, \ + f , ##args); \ + } while (0) + +/** + * v4l2_device_mask_call_until_err - Calls the specified operation for + * all subdevices where a group ID matches a specified bitmask. + * + * @v4l2_dev: &struct v4l2_device owning the sub-devices to iterate over. + * @grpmsk: bitmask to be checked against &struct v4l2_subdev->grp_id + * group ID to be matched. Use 0 to match them all. + * @o: name of the element at &struct v4l2_subdev_ops that contains @f. + * Each element there groups a set of operations functions. + * @f: operation function that will be called if @cond matches. + * The operation functions are defined in groups, according to + * each element at &struct v4l2_subdev_ops. + * @args: arguments for @f. + * + * Return: + * + * If the operation returns an error other than 0 or ``-ENOIOCTLCMD`` + * for any subdevice, then abort and return with that error code, + * zero otherwise. + * + * Note: subdevs cannot be added or deleted while walking + * the subdevs list. + */ +#define v4l2_device_mask_call_until_err(v4l2_dev, grpmsk, o, f, args...) \ +({ \ + struct v4l2_subdev *__sd; \ + __v4l2_device_call_subdevs_until_err_p(v4l2_dev, __sd, \ + (grpmsk) == 0 || (__sd->grp_id & (grpmsk)), o, \ + f , ##args); \ +}) + + +/** + * v4l2_device_has_op - checks if any subdev with matching grpid has a + * given ops. + * + * @v4l2_dev: &struct v4l2_device owning the sub-devices to iterate over. + * @grpid: &struct v4l2_subdev->grp_id group ID to match. + * Use 0 to match them all. + * @o: name of the element at &struct v4l2_subdev_ops that contains @f. + * Each element there groups a set of operations functions. + * @f: operation function that will be called if @cond matches. + * The operation functions are defined in groups, according to + * each element at &struct v4l2_subdev_ops. + */ +#define v4l2_device_has_op(v4l2_dev, grpid, o, f) \ +({ \ + struct v4l2_subdev *__sd; \ + bool __result = false; \ + list_for_each_entry(__sd, &(v4l2_dev)->subdevs, list) { \ + if ((grpid) && __sd->grp_id != (grpid)) \ + continue; \ + if (v4l2_subdev_has_op(__sd, o, f)) { \ + __result = true; \ + break; \ + } \ + } \ + __result; \ +}) + +/** + * v4l2_device_mask_has_op - checks if any subdev with matching group + * mask has a given ops. + * + * @v4l2_dev: &struct v4l2_device owning the sub-devices to iterate over. + * @grpmsk: bitmask to be checked against &struct v4l2_subdev->grp_id + * group ID to be matched. Use 0 to match them all. + * @o: name of the element at &struct v4l2_subdev_ops that contains @f. + * Each element there groups a set of operations functions. + * @f: operation function that will be called if @cond matches. + * The operation functions are defined in groups, according to + * each element at &struct v4l2_subdev_ops. + */ +#define v4l2_device_mask_has_op(v4l2_dev, grpmsk, o, f) \ +({ \ + struct v4l2_subdev *__sd; \ + bool __result = false; \ + list_for_each_entry(__sd, &(v4l2_dev)->subdevs, list) { \ + if ((grpmsk) && !(__sd->grp_id & (grpmsk))) \ + continue; \ + if (v4l2_subdev_has_op(__sd, o, f)) { \ + __result = true; \ + break; \ + } \ + } \ + __result; \ +}) + +#endif diff --git a/include/media/v4l2-dv-timings.h b/include/media/v4l2-dv-timings.h new file mode 100644 index 000000000..2cc0cabc1 --- /dev/null +++ b/include/media/v4l2-dv-timings.h @@ -0,0 +1,254 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * v4l2-dv-timings - Internal header with dv-timings helper functions + * + * Copyright 2013 Cisco Systems, Inc. and/or its affiliates. All rights reserved. + */ + +#ifndef __V4L2_DV_TIMINGS_H +#define __V4L2_DV_TIMINGS_H + +#include <linux/videodev2.h> + +/** + * v4l2_calc_timeperframe - helper function to calculate timeperframe based + * v4l2_dv_timings fields. + * @t: Timings for the video mode. + * + * Calculates the expected timeperframe using the pixel clock value and + * horizontal/vertical measures. This means that v4l2_dv_timings structure + * must be correctly and fully filled. + */ +struct v4l2_fract v4l2_calc_timeperframe(const struct v4l2_dv_timings *t); + +/* + * v4l2_dv_timings_presets: list of all dv_timings presets. + */ +extern const struct v4l2_dv_timings v4l2_dv_timings_presets[]; + +/** + * typedef v4l2_check_dv_timings_fnc - timings check callback + * + * @t: the v4l2_dv_timings struct. + * @handle: a handle from the driver. + * + * Returns true if the given timings are valid. + */ +typedef bool v4l2_check_dv_timings_fnc(const struct v4l2_dv_timings *t, void *handle); + +/** + * v4l2_valid_dv_timings() - are these timings valid? + * + * @t: the v4l2_dv_timings struct. + * @cap: the v4l2_dv_timings_cap capabilities. + * @fnc: callback to check if this timing is OK. May be NULL. + * @fnc_handle: a handle that is passed on to @fnc. + * + * Returns true if the given dv_timings struct is supported by the + * hardware capabilities and the callback function (if non-NULL), returns + * false otherwise. + */ +bool v4l2_valid_dv_timings(const struct v4l2_dv_timings *t, + const struct v4l2_dv_timings_cap *cap, + v4l2_check_dv_timings_fnc fnc, + void *fnc_handle); + +/** + * v4l2_enum_dv_timings_cap() - Helper function to enumerate possible DV + * timings based on capabilities + * + * @t: the v4l2_enum_dv_timings struct. + * @cap: the v4l2_dv_timings_cap capabilities. + * @fnc: callback to check if this timing is OK. May be NULL. + * @fnc_handle: a handle that is passed on to @fnc. + * + * This enumerates dv_timings using the full list of possible CEA-861 and DMT + * timings, filtering out any timings that are not supported based on the + * hardware capabilities and the callback function (if non-NULL). + * + * If a valid timing for the given index is found, it will fill in @t and + * return 0, otherwise it returns -EINVAL. + */ +int v4l2_enum_dv_timings_cap(struct v4l2_enum_dv_timings *t, + const struct v4l2_dv_timings_cap *cap, + v4l2_check_dv_timings_fnc fnc, + void *fnc_handle); + +/** + * v4l2_find_dv_timings_cap() - Find the closest timings struct + * + * @t: the v4l2_enum_dv_timings struct. + * @cap: the v4l2_dv_timings_cap capabilities. + * @pclock_delta: maximum delta between t->pixelclock and the timing struct + * under consideration. + * @fnc: callback to check if a given timings struct is OK. May be NULL. + * @fnc_handle: a handle that is passed on to @fnc. + * + * This function tries to map the given timings to an entry in the + * full list of possible CEA-861 and DMT timings, filtering out any timings + * that are not supported based on the hardware capabilities and the callback + * function (if non-NULL). + * + * On success it will fill in @t with the found timings and it returns true. + * On failure it will return false. + */ +bool v4l2_find_dv_timings_cap(struct v4l2_dv_timings *t, + const struct v4l2_dv_timings_cap *cap, + unsigned pclock_delta, + v4l2_check_dv_timings_fnc fnc, + void *fnc_handle); + +/** + * v4l2_find_dv_timings_cea861_vic() - find timings based on CEA-861 VIC + * @t: the timings data. + * @vic: CEA-861 VIC code + * + * On success it will fill in @t with the found timings and it returns true. + * On failure it will return false. + */ +bool v4l2_find_dv_timings_cea861_vic(struct v4l2_dv_timings *t, u8 vic); + +/** + * v4l2_match_dv_timings() - do two timings match? + * + * @measured: the measured timings data. + * @standard: the timings according to the standard. + * @pclock_delta: maximum delta in Hz between standard->pixelclock and + * the measured timings. + * @match_reduced_fps: if true, then fail if V4L2_DV_FL_REDUCED_FPS does not + * match. + * + * Returns true if the two timings match, returns false otherwise. + */ +bool v4l2_match_dv_timings(const struct v4l2_dv_timings *measured, + const struct v4l2_dv_timings *standard, + unsigned pclock_delta, bool match_reduced_fps); + +/** + * v4l2_print_dv_timings() - log the contents of a dv_timings struct + * @dev_prefix:device prefix for each log line. + * @prefix: additional prefix for each log line, may be NULL. + * @t: the timings data. + * @detailed: if true, give a detailed log. + */ +void v4l2_print_dv_timings(const char *dev_prefix, const char *prefix, + const struct v4l2_dv_timings *t, bool detailed); + +/** + * v4l2_detect_cvt - detect if the given timings follow the CVT standard + * + * @frame_height: the total height of the frame (including blanking) in lines. + * @hfreq: the horizontal frequency in Hz. + * @vsync: the height of the vertical sync in lines. + * @active_width: active width of image (does not include blanking). This + * information is needed only in case of version 2 of reduced blanking. + * In other cases, this parameter does not have any effect on timings. + * @polarities: the horizontal and vertical polarities (same as struct + * v4l2_bt_timings polarities). + * @interlaced: if this flag is true, it indicates interlaced format + * @fmt: the resulting timings. + * + * This function will attempt to detect if the given values correspond to a + * valid CVT format. If so, then it will return true, and fmt will be filled + * in with the found CVT timings. + */ +bool v4l2_detect_cvt(unsigned frame_height, unsigned hfreq, unsigned vsync, + unsigned active_width, u32 polarities, bool interlaced, + struct v4l2_dv_timings *fmt); + +/** + * v4l2_detect_gtf - detect if the given timings follow the GTF standard + * + * @frame_height: the total height of the frame (including blanking) in lines. + * @hfreq: the horizontal frequency in Hz. + * @vsync: the height of the vertical sync in lines. + * @polarities: the horizontal and vertical polarities (same as struct + * v4l2_bt_timings polarities). + * @interlaced: if this flag is true, it indicates interlaced format + * @aspect: preferred aspect ratio. GTF has no method of determining the + * aspect ratio in order to derive the image width from the + * image height, so it has to be passed explicitly. Usually + * the native screen aspect ratio is used for this. If it + * is not filled in correctly, then 16:9 will be assumed. + * @fmt: the resulting timings. + * + * This function will attempt to detect if the given values correspond to a + * valid GTF format. If so, then it will return true, and fmt will be filled + * in with the found GTF timings. + */ +bool v4l2_detect_gtf(unsigned frame_height, unsigned hfreq, unsigned vsync, + u32 polarities, bool interlaced, struct v4l2_fract aspect, + struct v4l2_dv_timings *fmt); + +/** + * v4l2_calc_aspect_ratio - calculate the aspect ratio based on bytes + * 0x15 and 0x16 from the EDID. + * + * @hor_landscape: byte 0x15 from the EDID. + * @vert_portrait: byte 0x16 from the EDID. + * + * Determines the aspect ratio from the EDID. + * See VESA Enhanced EDID standard, release A, rev 2, section 3.6.2: + * "Horizontal and Vertical Screen Size or Aspect Ratio" + */ +struct v4l2_fract v4l2_calc_aspect_ratio(u8 hor_landscape, u8 vert_portrait); + +/** + * v4l2_dv_timings_aspect_ratio - calculate the aspect ratio based on the + * v4l2_dv_timings information. + * + * @t: the timings data. + */ +struct v4l2_fract v4l2_dv_timings_aspect_ratio(const struct v4l2_dv_timings *t); + +/** + * can_reduce_fps - check if conditions for reduced fps are true. + * @bt: v4l2 timing structure + * + * For different timings reduced fps is allowed if the following conditions + * are met: + * + * - For CVT timings: if reduced blanking v2 (vsync == 8) is true. + * - For CEA861 timings: if %V4L2_DV_FL_CAN_REDUCE_FPS flag is true. + */ +static inline bool can_reduce_fps(struct v4l2_bt_timings *bt) +{ + if ((bt->standards & V4L2_DV_BT_STD_CVT) && (bt->vsync == 8)) + return true; + + if ((bt->standards & V4L2_DV_BT_STD_CEA861) && + (bt->flags & V4L2_DV_FL_CAN_REDUCE_FPS)) + return true; + + return false; +} + +/** + * struct v4l2_hdmi_rx_colorimetry - describes the HDMI colorimetry information + * @colorspace: enum v4l2_colorspace, the colorspace + * @ycbcr_enc: enum v4l2_ycbcr_encoding, Y'CbCr encoding + * @quantization: enum v4l2_quantization, colorspace quantization + * @xfer_func: enum v4l2_xfer_func, colorspace transfer function + */ +struct v4l2_hdmi_colorimetry { + enum v4l2_colorspace colorspace; + enum v4l2_ycbcr_encoding ycbcr_enc; + enum v4l2_quantization quantization; + enum v4l2_xfer_func xfer_func; +}; + +struct hdmi_avi_infoframe; +struct hdmi_vendor_infoframe; + +struct v4l2_hdmi_colorimetry +v4l2_hdmi_rx_colorimetry(const struct hdmi_avi_infoframe *avi, + const struct hdmi_vendor_infoframe *hdmi, + unsigned int height); + +u16 v4l2_get_edid_phys_addr(const u8 *edid, unsigned int size, + unsigned int *offset); +void v4l2_set_edid_phys_addr(u8 *edid, unsigned int size, u16 phys_addr); +u16 v4l2_phys_addr_for_input(u16 phys_addr, u8 input); +int v4l2_phys_addr_validate(u16 phys_addr, u16 *parent, u16 *port); + +#endif diff --git a/include/media/v4l2-event.h b/include/media/v4l2-event.h new file mode 100644 index 000000000..3f0281d06 --- /dev/null +++ b/include/media/v4l2-event.h @@ -0,0 +1,199 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * v4l2-event.h + * + * V4L2 events. + * + * Copyright (C) 2009--2010 Nokia Corporation. + * + * Contact: Sakari Ailus <sakari.ailus@iki.fi> + */ + +#ifndef V4L2_EVENT_H +#define V4L2_EVENT_H + +#include <linux/types.h> +#include <linux/videodev2.h> +#include <linux/wait.h> + +struct v4l2_fh; +struct v4l2_subdev; +struct v4l2_subscribed_event; +struct video_device; + +/** + * struct v4l2_kevent - Internal kernel event struct. + * @list: List node for the v4l2_fh->available list. + * @sev: Pointer to parent v4l2_subscribed_event. + * @event: The event itself. + * @ts: The timestamp of the event. + */ +struct v4l2_kevent { + struct list_head list; + struct v4l2_subscribed_event *sev; + struct v4l2_event event; + u64 ts; +}; + +/** + * struct v4l2_subscribed_event_ops - Subscribed event operations. + * + * @add: Optional callback, called when a new listener is added + * @del: Optional callback, called when a listener stops listening + * @replace: Optional callback that can replace event 'old' with event 'new'. + * @merge: Optional callback that can merge event 'old' into event 'new'. + */ +struct v4l2_subscribed_event_ops { + int (*add)(struct v4l2_subscribed_event *sev, unsigned int elems); + void (*del)(struct v4l2_subscribed_event *sev); + void (*replace)(struct v4l2_event *old, const struct v4l2_event *new); + void (*merge)(const struct v4l2_event *old, struct v4l2_event *new); +}; + +/** + * struct v4l2_subscribed_event - Internal struct representing a subscribed + * event. + * + * @list: List node for the v4l2_fh->subscribed list. + * @type: Event type. + * @id: Associated object ID (e.g. control ID). 0 if there isn't any. + * @flags: Copy of v4l2_event_subscription->flags. + * @fh: Filehandle that subscribed to this event. + * @node: List node that hooks into the object's event list + * (if there is one). + * @ops: v4l2_subscribed_event_ops + * @elems: The number of elements in the events array. + * @first: The index of the events containing the oldest available event. + * @in_use: The number of queued events. + * @events: An array of @elems events. + */ +struct v4l2_subscribed_event { + struct list_head list; + u32 type; + u32 id; + u32 flags; + struct v4l2_fh *fh; + struct list_head node; + const struct v4l2_subscribed_event_ops *ops; + unsigned int elems; + unsigned int first; + unsigned int in_use; + struct v4l2_kevent events[]; +}; + +/** + * v4l2_event_dequeue - Dequeue events from video device. + * + * @fh: pointer to struct v4l2_fh + * @event: pointer to struct v4l2_event + * @nonblocking: if not zero, waits for an event to arrive + */ +int v4l2_event_dequeue(struct v4l2_fh *fh, struct v4l2_event *event, + int nonblocking); + +/** + * v4l2_event_queue - Queue events to video device. + * + * @vdev: pointer to &struct video_device + * @ev: pointer to &struct v4l2_event + * + * The event will be queued for all &struct v4l2_fh file handlers. + * + * .. note:: + * The driver's only responsibility is to fill in the type and the data + * fields.The other fields will be filled in by V4L2. + */ +void v4l2_event_queue(struct video_device *vdev, const struct v4l2_event *ev); + +/** + * v4l2_event_queue_fh - Queue events to video device. + * + * @fh: pointer to &struct v4l2_fh + * @ev: pointer to &struct v4l2_event + * + * + * The event will be queued only for the specified &struct v4l2_fh file handler. + * + * .. note:: + * The driver's only responsibility is to fill in the type and the data + * fields.The other fields will be filled in by V4L2. + */ +void v4l2_event_queue_fh(struct v4l2_fh *fh, const struct v4l2_event *ev); + +/** + * v4l2_event_pending - Check if an event is available + * + * @fh: pointer to &struct v4l2_fh + * + * Returns the number of pending events. + */ +int v4l2_event_pending(struct v4l2_fh *fh); + +/** + * v4l2_event_subscribe - Subscribes to an event + * + * @fh: pointer to &struct v4l2_fh + * @sub: pointer to &struct v4l2_event_subscription + * @elems: size of the events queue + * @ops: pointer to &v4l2_subscribed_event_ops + * + * .. note:: + * + * if @elems is zero, the framework will fill in a default value, + * with is currently 1 element. + */ +int v4l2_event_subscribe(struct v4l2_fh *fh, + const struct v4l2_event_subscription *sub, + unsigned int elems, + const struct v4l2_subscribed_event_ops *ops); +/** + * v4l2_event_unsubscribe - Unsubscribes to an event + * + * @fh: pointer to &struct v4l2_fh + * @sub: pointer to &struct v4l2_event_subscription + */ +int v4l2_event_unsubscribe(struct v4l2_fh *fh, + const struct v4l2_event_subscription *sub); +/** + * v4l2_event_unsubscribe_all - Unsubscribes to all events + * + * @fh: pointer to &struct v4l2_fh + */ +void v4l2_event_unsubscribe_all(struct v4l2_fh *fh); + +/** + * v4l2_event_subdev_unsubscribe - Subdev variant of v4l2_event_unsubscribe() + * + * @sd: pointer to &struct v4l2_subdev + * @fh: pointer to &struct v4l2_fh + * @sub: pointer to &struct v4l2_event_subscription + * + * .. note:: + * + * This function should be used for the &struct v4l2_subdev_core_ops + * %unsubscribe_event field. + */ +int v4l2_event_subdev_unsubscribe(struct v4l2_subdev *sd, + struct v4l2_fh *fh, + struct v4l2_event_subscription *sub); +/** + * v4l2_src_change_event_subscribe - helper function that calls + * v4l2_event_subscribe() if the event is %V4L2_EVENT_SOURCE_CHANGE. + * + * @fh: pointer to struct v4l2_fh + * @sub: pointer to &struct v4l2_event_subscription + */ +int v4l2_src_change_event_subscribe(struct v4l2_fh *fh, + const struct v4l2_event_subscription *sub); +/** + * v4l2_src_change_event_subdev_subscribe - Variant of v4l2_event_subscribe(), + * meant to subscribe only events of the type %V4L2_EVENT_SOURCE_CHANGE. + * + * @sd: pointer to &struct v4l2_subdev + * @fh: pointer to &struct v4l2_fh + * @sub: pointer to &struct v4l2_event_subscription + */ +int v4l2_src_change_event_subdev_subscribe(struct v4l2_subdev *sd, + struct v4l2_fh *fh, + struct v4l2_event_subscription *sub); +#endif /* V4L2_EVENT_H */ diff --git a/include/media/v4l2-fh.h b/include/media/v4l2-fh.h new file mode 100644 index 000000000..b5b3e00c8 --- /dev/null +++ b/include/media/v4l2-fh.h @@ -0,0 +1,161 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * v4l2-fh.h + * + * V4L2 file handle. Store per file handle data for the V4L2 + * framework. Using file handles is optional for the drivers. + * + * Copyright (C) 2009--2010 Nokia Corporation. + * + * Contact: Sakari Ailus <sakari.ailus@iki.fi> + */ + +#ifndef V4L2_FH_H +#define V4L2_FH_H + +#include <linux/fs.h> +#include <linux/kconfig.h> +#include <linux/list.h> +#include <linux/videodev2.h> + +struct video_device; +struct v4l2_ctrl_handler; + +/** + * struct v4l2_fh - Describes a V4L2 file handler + * + * @list: list of file handlers + * @vdev: pointer to &struct video_device + * @ctrl_handler: pointer to &struct v4l2_ctrl_handler + * @prio: priority of the file handler, as defined by &enum v4l2_priority + * + * @wait: event' s wait queue + * @subscribe_lock: serialise changes to the subscribed list; guarantee that + * the add and del event callbacks are orderly called + * @subscribed: list of subscribed events + * @available: list of events waiting to be dequeued + * @navailable: number of available events at @available list + * @sequence: event sequence number + * + * @m2m_ctx: pointer to &struct v4l2_m2m_ctx + */ +struct v4l2_fh { + struct list_head list; + struct video_device *vdev; + struct v4l2_ctrl_handler *ctrl_handler; + enum v4l2_priority prio; + + /* Events */ + wait_queue_head_t wait; + struct mutex subscribe_lock; + struct list_head subscribed; + struct list_head available; + unsigned int navailable; + u32 sequence; + + struct v4l2_m2m_ctx *m2m_ctx; +}; + +/** + * v4l2_fh_init - Initialise the file handle. + * + * @fh: pointer to &struct v4l2_fh + * @vdev: pointer to &struct video_device + * + * Parts of the V4L2 framework using the + * file handles should be initialised in this function. Must be called + * from driver's v4l2_file_operations->open\(\) handler if the driver + * uses &struct v4l2_fh. + */ +void v4l2_fh_init(struct v4l2_fh *fh, struct video_device *vdev); + +/** + * v4l2_fh_add - Add the fh to the list of file handles on a video_device. + * + * @fh: pointer to &struct v4l2_fh + * + * .. note:: + * The @fh file handle must be initialised first. + */ +void v4l2_fh_add(struct v4l2_fh *fh); + +/** + * v4l2_fh_open - Ancillary routine that can be used as the open\(\) op + * of v4l2_file_operations. + * + * @filp: pointer to struct file + * + * It allocates a v4l2_fh and inits and adds it to the &struct video_device + * associated with the file pointer. + */ +int v4l2_fh_open(struct file *filp); + +/** + * v4l2_fh_del - Remove file handle from the list of file handles. + * + * @fh: pointer to &struct v4l2_fh + * + * On error filp->private_data will be %NULL, otherwise it will point to + * the &struct v4l2_fh. + * + * .. note:: + * Must be called in v4l2_file_operations->release\(\) handler if the driver + * uses &struct v4l2_fh. + */ +void v4l2_fh_del(struct v4l2_fh *fh); + +/** + * v4l2_fh_exit - Release resources related to a file handle. + * + * @fh: pointer to &struct v4l2_fh + * + * Parts of the V4L2 framework using the v4l2_fh must release their + * resources here, too. + * + * .. note:: + * Must be called in v4l2_file_operations->release\(\) handler if the + * driver uses &struct v4l2_fh. + */ +void v4l2_fh_exit(struct v4l2_fh *fh); + +/** + * v4l2_fh_release - Ancillary routine that can be used as the release\(\) op + * of v4l2_file_operations. + * + * @filp: pointer to struct file + * + * It deletes and exits the v4l2_fh associated with the file pointer and + * frees it. It will do nothing if filp->private_data (the pointer to the + * v4l2_fh struct) is %NULL. + * + * This function always returns 0. + */ +int v4l2_fh_release(struct file *filp); + +/** + * v4l2_fh_is_singular - Returns 1 if this filehandle is the only filehandle + * opened for the associated video_device. + * + * @fh: pointer to &struct v4l2_fh + * + * If @fh is NULL, then it returns 0. + */ +int v4l2_fh_is_singular(struct v4l2_fh *fh); + +/** + * v4l2_fh_is_singular_file - Returns 1 if this filehandle is the only + * filehandle opened for the associated video_device. + * + * @filp: pointer to struct file + * + * This is a helper function variant of v4l2_fh_is_singular() with uses + * struct file as argument. + * + * If filp->private_data is %NULL, then it will return 0. + */ +static inline int v4l2_fh_is_singular_file(struct file *filp) +{ + return v4l2_fh_is_singular(filp->private_data); +} + +#endif /* V4L2_EVENT_H */ diff --git a/include/media/v4l2-flash-led-class.h b/include/media/v4l2-flash-led-class.h new file mode 100644 index 000000000..b106e7a74 --- /dev/null +++ b/include/media/v4l2-flash-led-class.h @@ -0,0 +1,186 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * V4L2 flash LED sub-device registration helpers. + * + * Copyright (C) 2015 Samsung Electronics Co., Ltd + * Author: Jacek Anaszewski <j.anaszewski@samsung.com> + */ + +#ifndef _V4L2_FLASH_H +#define _V4L2_FLASH_H + +#include <media/v4l2-ctrls.h> +#include <media/v4l2-subdev.h> + +struct led_classdev_flash; +struct led_classdev; +struct v4l2_flash; +enum led_brightness; + +/** + * struct v4l2_flash_ctrl_data - flash control initialization data, filled + * basing on the features declared by the LED flash + * class driver in the v4l2_flash_config + * @config: initialization data for a control + * @cid: contains v4l2 flash control id if the config + * field was initialized, 0 otherwise + */ +struct v4l2_flash_ctrl_data { + struct v4l2_ctrl_config config; + u32 cid; +}; + +/** + * struct v4l2_flash_ops - V4L2 flash operations + * + * @external_strobe_set: Setup strobing the flash by hardware pin state + * assertion. + * @intensity_to_led_brightness: Convert intensity to brightness in a device + * specific manner + * @led_brightness_to_intensity: convert brightness to intensity in a device + * specific manner. + */ +struct v4l2_flash_ops { + int (*external_strobe_set)(struct v4l2_flash *v4l2_flash, + bool enable); + enum led_brightness (*intensity_to_led_brightness) + (struct v4l2_flash *v4l2_flash, s32 intensity); + s32 (*led_brightness_to_intensity) + (struct v4l2_flash *v4l2_flash, enum led_brightness); +}; + +/** + * struct v4l2_flash_config - V4L2 Flash sub-device initialization data + * @dev_name: the name of the media entity, + * unique in the system + * @intensity: non-flash strobe constraints for the LED + * @flash_faults: bitmask of flash faults that the LED flash class + * device can report; corresponding LED_FAULT* bit + * definitions are available in the header file + * <linux/led-class-flash.h> + * @has_external_strobe: external strobe capability + */ +struct v4l2_flash_config { + char dev_name[32]; + struct led_flash_setting intensity; + u32 flash_faults; + unsigned int has_external_strobe:1; +}; + +/** + * struct v4l2_flash - Flash sub-device context + * @fled_cdev: LED flash class device controlled by this sub-device + * @iled_cdev: LED class device representing indicator LED associated + * with the LED flash class device + * @ops: V4L2 specific flash ops + * @sd: V4L2 sub-device + * @hdl: flash controls handler + * @ctrls: array of pointers to controls, whose values define + * the sub-device state + */ +struct v4l2_flash { + struct led_classdev_flash *fled_cdev; + struct led_classdev *iled_cdev; + const struct v4l2_flash_ops *ops; + + struct v4l2_subdev sd; + struct v4l2_ctrl_handler hdl; + struct v4l2_ctrl **ctrls; +}; + +/** + * v4l2_subdev_to_v4l2_flash - Returns a &struct v4l2_flash from the + * &struct v4l2_subdev embedded on it. + * + * @sd: pointer to &struct v4l2_subdev + */ +static inline struct v4l2_flash *v4l2_subdev_to_v4l2_flash( + struct v4l2_subdev *sd) +{ + return container_of(sd, struct v4l2_flash, sd); +} + +/** + * v4l2_ctrl_to_v4l2_flash - Returns a &struct v4l2_flash from the + * &struct v4l2_ctrl embedded on it. + * + * @c: pointer to &struct v4l2_ctrl + */ +static inline struct v4l2_flash *v4l2_ctrl_to_v4l2_flash(struct v4l2_ctrl *c) +{ + return container_of(c->handler, struct v4l2_flash, hdl); +} + +#if IS_ENABLED(CONFIG_V4L2_FLASH_LED_CLASS) +/** + * v4l2_flash_init - initialize V4L2 flash led sub-device + * @dev: flash device, e.g. an I2C device + * @fwn: fwnode_handle of the LED, may be NULL if the same as device's + * @fled_cdev: LED flash class device to wrap + * @ops: V4L2 Flash device ops + * @config: initialization data for V4L2 Flash sub-device + * + * Create V4L2 Flash sub-device wrapping given LED subsystem device. + * The ops pointer is stored by the V4L2 flash framework. No + * references are held to config nor its contents once this function + * has returned. + * + * Returns: A valid pointer, or, when an error occurs, the return + * value is encoded using ERR_PTR(). Use IS_ERR() to check and + * PTR_ERR() to obtain the numeric return value. + */ +struct v4l2_flash *v4l2_flash_init( + struct device *dev, struct fwnode_handle *fwn, + struct led_classdev_flash *fled_cdev, + const struct v4l2_flash_ops *ops, struct v4l2_flash_config *config); + +/** + * v4l2_flash_indicator_init - initialize V4L2 indicator sub-device + * @dev: flash device, e.g. an I2C device + * @fwn: fwnode_handle of the LED, may be NULL if the same as device's + * @iled_cdev: LED flash class device representing the indicator LED + * @config: initialization data for V4L2 Flash sub-device + * + * Create V4L2 Flash sub-device wrapping given LED subsystem device. + * The ops pointer is stored by the V4L2 flash framework. No + * references are held to config nor its contents once this function + * has returned. + * + * Returns: A valid pointer, or, when an error occurs, the return + * value is encoded using ERR_PTR(). Use IS_ERR() to check and + * PTR_ERR() to obtain the numeric return value. + */ +struct v4l2_flash *v4l2_flash_indicator_init( + struct device *dev, struct fwnode_handle *fwn, + struct led_classdev *iled_cdev, struct v4l2_flash_config *config); + +/** + * v4l2_flash_release - release V4L2 Flash sub-device + * @v4l2_flash: the V4L2 Flash sub-device to release + * + * Release V4L2 Flash sub-device. + */ +void v4l2_flash_release(struct v4l2_flash *v4l2_flash); + +#else +static inline struct v4l2_flash *v4l2_flash_init( + struct device *dev, struct fwnode_handle *fwn, + struct led_classdev_flash *fled_cdev, + const struct v4l2_flash_ops *ops, struct v4l2_flash_config *config) +{ + return NULL; +} + +static inline struct v4l2_flash *v4l2_flash_indicator_init( + struct device *dev, struct fwnode_handle *fwn, + struct led_classdev *iled_cdev, struct v4l2_flash_config *config) +{ + return NULL; +} + +static inline void v4l2_flash_release(struct v4l2_flash *v4l2_flash) +{ +} +#endif /* CONFIG_V4L2_FLASH_LED_CLASS */ + +#endif /* _V4L2_FLASH_H */ diff --git a/include/media/v4l2-fwnode.h b/include/media/v4l2-fwnode.h new file mode 100644 index 000000000..ed0840f3d --- /dev/null +++ b/include/media/v4l2-fwnode.h @@ -0,0 +1,565 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * V4L2 fwnode binding parsing library + * + * Copyright (c) 2016 Intel Corporation. + * Author: Sakari Ailus <sakari.ailus@linux.intel.com> + * + * Copyright (C) 2012 - 2013 Samsung Electronics Co., Ltd. + * Author: Sylwester Nawrocki <s.nawrocki@samsung.com> + * + * Copyright (C) 2012 Renesas Electronics Corp. + * Author: Guennadi Liakhovetski <g.liakhovetski@gmx.de> + */ +#ifndef _V4L2_FWNODE_H +#define _V4L2_FWNODE_H + +#include <linux/errno.h> +#include <linux/fwnode.h> +#include <linux/list.h> +#include <linux/types.h> + +#include <media/v4l2-mediabus.h> + +struct fwnode_handle; +struct v4l2_async_notifier; +struct v4l2_async_subdev; + +#define V4L2_FWNODE_CSI2_MAX_DATA_LANES 4 + +/** + * struct v4l2_fwnode_bus_mipi_csi2 - MIPI CSI-2 bus data structure + * @flags: media bus (V4L2_MBUS_*) flags + * @data_lanes: an array of physical data lane indexes + * @clock_lane: physical lane index of the clock lane + * @num_data_lanes: number of data lanes + * @lane_polarities: polarity of the lanes. The order is the same of + * the physical lanes. + */ +struct v4l2_fwnode_bus_mipi_csi2 { + unsigned int flags; + unsigned char data_lanes[V4L2_FWNODE_CSI2_MAX_DATA_LANES]; + unsigned char clock_lane; + unsigned char num_data_lanes; + bool lane_polarities[1 + V4L2_FWNODE_CSI2_MAX_DATA_LANES]; +}; + +/** + * struct v4l2_fwnode_bus_parallel - parallel data bus data structure + * @flags: media bus (V4L2_MBUS_*) flags + * @bus_width: bus width in bits + * @data_shift: data shift in bits + */ +struct v4l2_fwnode_bus_parallel { + unsigned int flags; + unsigned char bus_width; + unsigned char data_shift; +}; + +/** + * struct v4l2_fwnode_bus_mipi_csi1 - CSI-1/CCP2 data bus structure + * @clock_inv: polarity of clock/strobe signal + * false - not inverted, true - inverted + * @strobe: false - data/clock, true - data/strobe + * @lane_polarity: the polarities of the clock (index 0) and data lanes + * index (1) + * @data_lane: the number of the data lane + * @clock_lane: the number of the clock lane + */ +struct v4l2_fwnode_bus_mipi_csi1 { + unsigned char clock_inv:1; + unsigned char strobe:1; + bool lane_polarity[2]; + unsigned char data_lane; + unsigned char clock_lane; +}; + +/** + * struct v4l2_fwnode_endpoint - the endpoint data structure + * @base: fwnode endpoint of the v4l2_fwnode + * @bus_type: bus type + * @bus: bus configuration data structure + * @bus.parallel: embedded &struct v4l2_fwnode_bus_parallel. + * Used if the bus is parallel. + * @bus.mipi_csi1: embedded &struct v4l2_fwnode_bus_mipi_csi1. + * Used if the bus is MIPI Alliance's Camera Serial + * Interface version 1 (MIPI CSI1) or Standard + * Mobile Imaging Architecture's Compact Camera Port 2 + * (SMIA CCP2). + * @bus.mipi_csi2: embedded &struct v4l2_fwnode_bus_mipi_csi2. + * Used if the bus is MIPI Alliance's Camera Serial + * Interface version 2 (MIPI CSI2). + * @link_frequencies: array of supported link frequencies + * @nr_of_link_frequencies: number of elements in link_frequenccies array + */ +struct v4l2_fwnode_endpoint { + struct fwnode_endpoint base; + /* + * Fields below this line will be zeroed by + * v4l2_fwnode_endpoint_parse() + */ + enum v4l2_mbus_type bus_type; + struct { + struct v4l2_fwnode_bus_parallel parallel; + struct v4l2_fwnode_bus_mipi_csi1 mipi_csi1; + struct v4l2_fwnode_bus_mipi_csi2 mipi_csi2; + } bus; + u64 *link_frequencies; + unsigned int nr_of_link_frequencies; +}; + +/** + * V4L2_FWNODE_PROPERTY_UNSET - identify a non initialized property + * + * All properties in &struct v4l2_fwnode_device_properties are initialized + * to this value. + */ +#define V4L2_FWNODE_PROPERTY_UNSET (-1U) + +/** + * enum v4l2_fwnode_orientation - possible device orientation + * @V4L2_FWNODE_ORIENTATION_FRONT: device installed on the front side + * @V4L2_FWNODE_ORIENTATION_BACK: device installed on the back side + * @V4L2_FWNODE_ORIENTATION_EXTERNAL: device externally located + */ +enum v4l2_fwnode_orientation { + V4L2_FWNODE_ORIENTATION_FRONT, + V4L2_FWNODE_ORIENTATION_BACK, + V4L2_FWNODE_ORIENTATION_EXTERNAL +}; + +/** + * struct v4l2_fwnode_device_properties - fwnode device properties + * @orientation: device orientation. See &enum v4l2_fwnode_orientation + * @rotation: device rotation + */ +struct v4l2_fwnode_device_properties { + enum v4l2_fwnode_orientation orientation; + unsigned int rotation; +}; + +/** + * struct v4l2_fwnode_link - a link between two endpoints + * @local_node: pointer to device_node of this endpoint + * @local_port: identifier of the port this endpoint belongs to + * @local_id: identifier of the id this endpoint belongs to + * @remote_node: pointer to device_node of the remote endpoint + * @remote_port: identifier of the port the remote endpoint belongs to + * @remote_id: identifier of the id the remote endpoint belongs to + */ +struct v4l2_fwnode_link { + struct fwnode_handle *local_node; + unsigned int local_port; + unsigned int local_id; + struct fwnode_handle *remote_node; + unsigned int remote_port; + unsigned int remote_id; +}; + +/** + * enum v4l2_connector_type - connector type + * @V4L2_CONN_UNKNOWN: unknown connector type, no V4L2 connector configuration + * @V4L2_CONN_COMPOSITE: analog composite connector + * @V4L2_CONN_SVIDEO: analog svideo connector + */ +enum v4l2_connector_type { + V4L2_CONN_UNKNOWN, + V4L2_CONN_COMPOSITE, + V4L2_CONN_SVIDEO, +}; + +/** + * struct v4l2_connector_link - connector link data structure + * @head: structure to be used to add the link to the + * &struct v4l2_fwnode_connector + * @fwnode_link: &struct v4l2_fwnode_link link between the connector and the + * device the connector belongs to. + */ +struct v4l2_connector_link { + struct list_head head; + struct v4l2_fwnode_link fwnode_link; +}; + +/** + * struct v4l2_fwnode_connector_analog - analog connector data structure + * @sdtv_stds: sdtv standards this connector supports, set to V4L2_STD_ALL + * if no restrictions are specified. + */ +struct v4l2_fwnode_connector_analog { + v4l2_std_id sdtv_stds; +}; + +/** + * struct v4l2_fwnode_connector - the connector data structure + * @name: the connector device name + * @label: optional connector label + * @type: connector type + * @links: list of all connector &struct v4l2_connector_link links + * @nr_of_links: total number of links + * @connector: connector configuration + * @connector.analog: analog connector configuration + * &struct v4l2_fwnode_connector_analog + */ +struct v4l2_fwnode_connector { + const char *name; + const char *label; + enum v4l2_connector_type type; + struct list_head links; + unsigned int nr_of_links; + + union { + struct v4l2_fwnode_connector_analog analog; + /* future connectors */ + } connector; +}; + +/** + * v4l2_fwnode_endpoint_parse() - parse all fwnode node properties + * @fwnode: pointer to the endpoint's fwnode handle + * @vep: pointer to the V4L2 fwnode data structure + * + * This function parses the V4L2 fwnode endpoint specific parameters from the + * firmware. The caller is responsible for assigning @vep.bus_type to a valid + * media bus type. The caller may also set the default configuration for the + * endpoint --- a configuration that shall be in line with the DT binding + * documentation. Should a device support multiple bus types, the caller may + * call this function once the correct type is found --- with a default + * configuration valid for that type. + * + * It is also allowed to set @vep.bus_type to V4L2_MBUS_UNKNOWN. USING THIS + * FEATURE REQUIRES "bus-type" PROPERTY IN DT BINDINGS. For old drivers, + * guessing @vep.bus_type between CSI-2 D-PHY, parallel and BT.656 busses is + * supported. NEVER RELY ON GUESSING @vep.bus_type IN NEW DRIVERS! + * + * The caller is required to initialise all fields of @vep, either with + * explicitly values, or by zeroing them. + * + * The function does not change the V4L2 fwnode endpoint state if it fails. + * + * NOTE: This function does not parse properties the size of which is variable + * without a low fixed limit. Please use v4l2_fwnode_endpoint_alloc_parse() in + * new drivers instead. + * + * Return: %0 on success or a negative error code on failure: + * %-ENOMEM on memory allocation failure + * %-EINVAL on parsing failure + * %-ENXIO on mismatching bus types + */ +int v4l2_fwnode_endpoint_parse(struct fwnode_handle *fwnode, + struct v4l2_fwnode_endpoint *vep); + +/** + * v4l2_fwnode_endpoint_free() - free the V4L2 fwnode acquired by + * v4l2_fwnode_endpoint_alloc_parse() + * @vep: the V4L2 fwnode the resources of which are to be released + * + * It is safe to call this function with NULL argument or on a V4L2 fwnode the + * parsing of which failed. + */ +void v4l2_fwnode_endpoint_free(struct v4l2_fwnode_endpoint *vep); + +/** + * v4l2_fwnode_endpoint_alloc_parse() - parse all fwnode node properties + * @fwnode: pointer to the endpoint's fwnode handle + * @vep: pointer to the V4L2 fwnode data structure + * + * This function parses the V4L2 fwnode endpoint specific parameters from the + * firmware. The caller is responsible for assigning @vep.bus_type to a valid + * media bus type. The caller may also set the default configuration for the + * endpoint --- a configuration that shall be in line with the DT binding + * documentation. Should a device support multiple bus types, the caller may + * call this function once the correct type is found --- with a default + * configuration valid for that type. + * + * It is also allowed to set @vep.bus_type to V4L2_MBUS_UNKNOWN. USING THIS + * FEATURE REQUIRES "bus-type" PROPERTY IN DT BINDINGS. For old drivers, + * guessing @vep.bus_type between CSI-2 D-PHY, parallel and BT.656 busses is + * supported. NEVER RELY ON GUESSING @vep.bus_type IN NEW DRIVERS! + * + * The caller is required to initialise all fields of @vep, either with + * explicitly values, or by zeroing them. + * + * The function does not change the V4L2 fwnode endpoint state if it fails. + * + * v4l2_fwnode_endpoint_alloc_parse() has two important differences to + * v4l2_fwnode_endpoint_parse(): + * + * 1. It also parses variable size data. + * + * 2. The memory it has allocated to store the variable size data must be freed + * using v4l2_fwnode_endpoint_free() when no longer needed. + * + * Return: %0 on success or a negative error code on failure: + * %-ENOMEM on memory allocation failure + * %-EINVAL on parsing failure + * %-ENXIO on mismatching bus types + */ +int v4l2_fwnode_endpoint_alloc_parse(struct fwnode_handle *fwnode, + struct v4l2_fwnode_endpoint *vep); + +/** + * v4l2_fwnode_parse_link() - parse a link between two endpoints + * @fwnode: pointer to the endpoint's fwnode at the local end of the link + * @link: pointer to the V4L2 fwnode link data structure + * + * Fill the link structure with the local and remote nodes and port numbers. + * The local_node and remote_node fields are set to point to the local and + * remote port's parent nodes respectively (the port parent node being the + * parent node of the port node if that node isn't a 'ports' node, or the + * grand-parent node of the port node otherwise). + * + * A reference is taken to both the local and remote nodes, the caller must use + * v4l2_fwnode_put_link() to drop the references when done with the + * link. + * + * Return: 0 on success, or -ENOLINK if the remote endpoint fwnode can't be + * found. + */ +int v4l2_fwnode_parse_link(struct fwnode_handle *fwnode, + struct v4l2_fwnode_link *link); + +/** + * v4l2_fwnode_put_link() - drop references to nodes in a link + * @link: pointer to the V4L2 fwnode link data structure + * + * Drop references to the local and remote nodes in the link. This function + * must be called on every link parsed with v4l2_fwnode_parse_link(). + */ +void v4l2_fwnode_put_link(struct v4l2_fwnode_link *link); + +/** + * v4l2_fwnode_connector_free() - free the V4L2 connector acquired memory + * @connector: the V4L2 connector resources of which are to be released + * + * Free all allocated memory and put all links acquired by + * v4l2_fwnode_connector_parse() and v4l2_fwnode_connector_add_link(). + * + * It is safe to call this function with NULL argument or on a V4L2 connector + * the parsing of which failed. + */ +void v4l2_fwnode_connector_free(struct v4l2_fwnode_connector *connector); + +/** + * v4l2_fwnode_connector_parse() - initialize the 'struct v4l2_fwnode_connector' + * @fwnode: pointer to the subdev endpoint's fwnode handle where the connector + * is connected to or to the connector endpoint fwnode handle. + * @connector: pointer to the V4L2 fwnode connector data structure + * + * Fill the &struct v4l2_fwnode_connector with the connector type, label and + * all &enum v4l2_connector_type specific connector data. The label is optional + * so it is set to %NULL if no one was found. The function initialize the links + * to zero. Adding links to the connector is done by calling + * v4l2_fwnode_connector_add_link(). + * + * The memory allocated for the label must be freed when no longer needed. + * Freeing the memory is done by v4l2_fwnode_connector_free(). + * + * Return: + * * %0 on success or a negative error code on failure: + * * %-EINVAL if @fwnode is invalid + * * %-ENOTCONN if connector type is unknown or connector device can't be found + */ +int v4l2_fwnode_connector_parse(struct fwnode_handle *fwnode, + struct v4l2_fwnode_connector *connector); + +/** + * v4l2_fwnode_connector_add_link - add a link between a connector node and + * a v4l2-subdev node. + * @fwnode: pointer to the subdev endpoint's fwnode handle where the connector + * is connected to + * @connector: pointer to the V4L2 fwnode connector data structure + * + * Add a new &struct v4l2_connector_link link to the + * &struct v4l2_fwnode_connector connector links list. The link local_node + * points to the connector node, the remote_node to the host v4l2 (sub)dev. + * + * The taken references to remote_node and local_node must be dropped and the + * allocated memory must be freed when no longer needed. Both is done by calling + * v4l2_fwnode_connector_free(). + * + * Return: + * * %0 on success or a negative error code on failure: + * * %-EINVAL if @fwnode or @connector is invalid or @connector type is unknown + * * %-ENOMEM on link memory allocation failure + * * %-ENOTCONN if remote connector device can't be found + * * %-ENOLINK if link parsing between v4l2 (sub)dev and connector fails + */ +int v4l2_fwnode_connector_add_link(struct fwnode_handle *fwnode, + struct v4l2_fwnode_connector *connector); + +/** + * v4l2_fwnode_device_parse() - parse fwnode device properties + * @dev: pointer to &struct device + * @props: pointer to &struct v4l2_fwnode_device_properties where to store the + * parsed properties values + * + * This function parses and validates the V4L2 fwnode device properties from the + * firmware interface, and fills the @struct v4l2_fwnode_device_properties + * provided by the caller. + * + * Return: + * % 0 on success + * %-EINVAL if a parsed property value is not valid + */ +int v4l2_fwnode_device_parse(struct device *dev, + struct v4l2_fwnode_device_properties *props); + +/** + * typedef parse_endpoint_func - Driver's callback function to be called on + * each V4L2 fwnode endpoint. + * + * @dev: pointer to &struct device + * @vep: pointer to &struct v4l2_fwnode_endpoint + * @asd: pointer to &struct v4l2_async_subdev + * + * Return: + * * %0 on success + * * %-ENOTCONN if the endpoint is to be skipped but this + * should not be considered as an error + * * %-EINVAL if the endpoint configuration is invalid + */ +typedef int (*parse_endpoint_func)(struct device *dev, + struct v4l2_fwnode_endpoint *vep, + struct v4l2_async_subdev *asd); + +/** + * v4l2_async_notifier_parse_fwnode_endpoints - Parse V4L2 fwnode endpoints in a + * device node + * @dev: the device the endpoints of which are to be parsed + * @notifier: notifier for @dev + * @asd_struct_size: size of the driver's async sub-device struct, including + * sizeof(struct v4l2_async_subdev). The &struct + * v4l2_async_subdev shall be the first member of + * the driver's async sub-device struct, i.e. both + * begin at the same memory address. + * @parse_endpoint: Driver's callback function called on each V4L2 fwnode + * endpoint. Optional. + * + * Parse the fwnode endpoints of the @dev device and populate the async sub- + * devices list in the notifier. The @parse_endpoint callback function is + * called for each endpoint with the corresponding async sub-device pointer to + * let the caller initialize the driver-specific part of the async sub-device + * structure. + * + * The notifier memory shall be zeroed before this function is called on the + * notifier. + * + * This function may not be called on a registered notifier and may be called on + * a notifier only once. + * + * The &struct v4l2_fwnode_endpoint passed to the callback function + * @parse_endpoint is released once the function is finished. If there is a need + * to retain that configuration, the user needs to allocate memory for it. + * + * Any notifier populated using this function must be released with a call to + * v4l2_async_notifier_cleanup() after it has been unregistered and the async + * sub-devices are no longer in use, even if the function returned an error. + * + * Return: %0 on success, including when no async sub-devices are found + * %-ENOMEM if memory allocation failed + * %-EINVAL if graph or endpoint parsing failed + * Other error codes as returned by @parse_endpoint + */ +int +v4l2_async_notifier_parse_fwnode_endpoints(struct device *dev, + struct v4l2_async_notifier *notifier, + size_t asd_struct_size, + parse_endpoint_func parse_endpoint); + +/** + * v4l2_async_notifier_parse_fwnode_endpoints_by_port - Parse V4L2 fwnode + * endpoints of a port in a + * device node + * @dev: the device the endpoints of which are to be parsed + * @notifier: notifier for @dev + * @asd_struct_size: size of the driver's async sub-device struct, including + * sizeof(struct v4l2_async_subdev). The &struct + * v4l2_async_subdev shall be the first member of + * the driver's async sub-device struct, i.e. both + * begin at the same memory address. + * @port: port number where endpoints are to be parsed + * @parse_endpoint: Driver's callback function called on each V4L2 fwnode + * endpoint. Optional. + * + * This function is just like v4l2_async_notifier_parse_fwnode_endpoints() with + * the exception that it only parses endpoints in a given port. This is useful + * on devices that have both sinks and sources: the async sub-devices connected + * to sources have already been configured by another driver (on capture + * devices). In this case the driver must know which ports to parse. + * + * Parse the fwnode endpoints of the @dev device on a given @port and populate + * the async sub-devices list of the notifier. The @parse_endpoint callback + * function is called for each endpoint with the corresponding async sub-device + * pointer to let the caller initialize the driver-specific part of the async + * sub-device structure. + * + * The notifier memory shall be zeroed before this function is called on the + * notifier the first time. + * + * This function may not be called on a registered notifier and may be called on + * a notifier only once per port. + * + * The &struct v4l2_fwnode_endpoint passed to the callback function + * @parse_endpoint is released once the function is finished. If there is a need + * to retain that configuration, the user needs to allocate memory for it. + * + * Any notifier populated using this function must be released with a call to + * v4l2_async_notifier_cleanup() after it has been unregistered and the async + * sub-devices are no longer in use, even if the function returned an error. + * + * Return: %0 on success, including when no async sub-devices are found + * %-ENOMEM if memory allocation failed + * %-EINVAL if graph or endpoint parsing failed + * Other error codes as returned by @parse_endpoint + */ +int +v4l2_async_notifier_parse_fwnode_endpoints_by_port(struct device *dev, + struct v4l2_async_notifier *notifier, + size_t asd_struct_size, + unsigned int port, + parse_endpoint_func parse_endpoint); + +/** + * v4l2_fwnode_reference_parse_sensor_common - parse common references on + * sensors for async sub-devices + * @dev: the device node the properties of which are parsed for references + * @notifier: the async notifier where the async subdevs will be added + * + * Parse common sensor properties for remote devices related to the + * sensor and set up async sub-devices for them. + * + * Any notifier populated using this function must be released with a call to + * v4l2_async_notifier_release() after it has been unregistered and the async + * sub-devices are no longer in use, even in the case the function returned an + * error. + * + * Return: 0 on success + * -ENOMEM if memory allocation failed + * -EINVAL if property parsing failed + */ +int v4l2_async_notifier_parse_fwnode_sensor_common(struct device *dev, + struct v4l2_async_notifier *notifier); + +/* Helper macros to access the connector links. */ + +/** v4l2_connector_last_link - Helper macro to get the first + * &struct v4l2_fwnode_connector link + * @v4l2c: &struct v4l2_fwnode_connector owning the connector links + * + * This marco returns the first added &struct v4l2_connector_link connector + * link or @NULL if the connector has no links. + */ +#define v4l2_connector_first_link(v4l2c) \ + list_first_entry_or_null(&(v4l2c)->links, \ + struct v4l2_connector_link, head) + +/** v4l2_connector_last_link - Helper macro to get the last + * &struct v4l2_fwnode_connector link + * @v4l2c: &struct v4l2_fwnode_connector owning the connector links + * + * This marco returns the last &struct v4l2_connector_link added connector link. + */ +#define v4l2_connector_last_link(v4l2c) \ + list_last_entry(&(v4l2c)->links, struct v4l2_connector_link, head) + +#endif /* _V4L2_FWNODE_H */ diff --git a/include/media/v4l2-h264.h b/include/media/v4l2-h264.h new file mode 100644 index 000000000..f08ba1812 --- /dev/null +++ b/include/media/v4l2-h264.h @@ -0,0 +1,84 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * Helper functions for H264 codecs. + * + * Copyright (c) 2019 Collabora, Ltd. + * + * Author: Boris Brezillon <boris.brezillon@collabora.com> + */ + +#ifndef _MEDIA_V4L2_H264_H +#define _MEDIA_V4L2_H264_H + +#include <media/h264-ctrls.h> + +/** + * struct v4l2_h264_reflist_builder - Reference list builder object + * + * @refs.pic_order_count: reference picture order count + * @refs.frame_num: reference frame number + * @refs.pic_num: reference picture number + * @refs.longterm: set to true for a long term reference + * @refs: array of references + * @cur_pic_order_count: picture order count of the frame being decoded + * @unordered_reflist: unordered list of references. Will be used to generate + * ordered P/B0/B1 lists + * @num_valid: number of valid references in the refs array + * + * This object stores the context of the P/B0/B1 reference list builder. + * This procedure is described in section '8.2.4 Decoding process for reference + * picture lists construction' of the H264 spec. + */ +struct v4l2_h264_reflist_builder { + struct { + s32 pic_order_count; + int frame_num; + u32 pic_num; + u16 longterm : 1; + } refs[V4L2_H264_NUM_DPB_ENTRIES]; + s32 cur_pic_order_count; + u8 unordered_reflist[V4L2_H264_NUM_DPB_ENTRIES]; + u8 num_valid; +}; + +void +v4l2_h264_init_reflist_builder(struct v4l2_h264_reflist_builder *b, + const struct v4l2_ctrl_h264_decode_params *dec_params, + const struct v4l2_ctrl_h264_sps *sps, + const struct v4l2_h264_dpb_entry dpb[V4L2_H264_NUM_DPB_ENTRIES]); + +/** + * v4l2_h264_build_b_ref_lists() - Build the B0/B1 reference lists + * + * @builder: reference list builder context + * @b0_reflist: 16-bytes array used to store the B0 reference list. Each entry + * is an index in the DPB + * @b1_reflist: 16-bytes array used to store the B1 reference list. Each entry + * is an index in the DPB + * + * This functions builds the B0/B1 reference lists. This procedure is described + * in section '8.2.4 Decoding process for reference picture lists construction' + * of the H264 spec. This function can be used by H264 decoder drivers that + * need to pass B0/B1 reference lists to the hardware. + */ +void +v4l2_h264_build_b_ref_lists(const struct v4l2_h264_reflist_builder *builder, + u8 *b0_reflist, u8 *b1_reflist); + +/** + * v4l2_h264_build_b_ref_lists() - Build the P reference list + * + * @builder: reference list builder context + * @p_reflist: 16-bytes array used to store the P reference list. Each entry + * is an index in the DPB + * + * This functions builds the P reference lists. This procedure is describe in + * section '8.2.4 Decoding process for reference picture lists construction' + * of the H264 spec. This function can be used by H264 decoder drivers that + * need to pass a P reference list to the hardware. + */ +void +v4l2_h264_build_p_ref_list(const struct v4l2_h264_reflist_builder *builder, + u8 *reflist); + +#endif /* _MEDIA_V4L2_H264_H */ diff --git a/include/media/v4l2-image-sizes.h b/include/media/v4l2-image-sizes.h new file mode 100644 index 000000000..24a7a0bb5 --- /dev/null +++ b/include/media/v4l2-image-sizes.h @@ -0,0 +1,46 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Standard image size definitions + * + * Copyright (C) 2013, Sylwester Nawrocki <sylvester.nawrocki@gmail.com> + */ +#ifndef _IMAGE_SIZES_H +#define _IMAGE_SIZES_H + +#define CIF_WIDTH 352 +#define CIF_HEIGHT 288 + +#define HD_720_WIDTH 1280 +#define HD_720_HEIGHT 720 + +#define HD_1080_WIDTH 1920 +#define HD_1080_HEIGHT 1080 + +#define QCIF_WIDTH 176 +#define QCIF_HEIGHT 144 + +#define QQCIF_WIDTH 88 +#define QQCIF_HEIGHT 72 + +#define QQVGA_WIDTH 160 +#define QQVGA_HEIGHT 120 + +#define QVGA_WIDTH 320 +#define QVGA_HEIGHT 240 + +#define SVGA_WIDTH 800 +#define SVGA_HEIGHT 600 + +#define SXGA_WIDTH 1280 +#define SXGA_HEIGHT 1024 + +#define VGA_WIDTH 640 +#define VGA_HEIGHT 480 + +#define UXGA_WIDTH 1600 +#define UXGA_HEIGHT 1200 + +#define XGA_WIDTH 1024 +#define XGA_HEIGHT 768 + +#endif /* _IMAGE_SIZES_H */ diff --git a/include/media/v4l2-ioctl.h b/include/media/v4l2-ioctl.h new file mode 100644 index 000000000..86878fba3 --- /dev/null +++ b/include/media/v4l2-ioctl.h @@ -0,0 +1,782 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * + * V 4 L 2 D R I V E R H E L P E R A P I + * + * Moved from videodev2.h + * + * Some commonly needed functions for drivers (v4l2-common.o module) + */ +#ifndef _V4L2_IOCTL_H +#define _V4L2_IOCTL_H + +#include <linux/poll.h> +#include <linux/fs.h> +#include <linux/mutex.h> +#include <linux/sched/signal.h> +#include <linux/compiler.h> /* need __user */ +#include <linux/videodev2.h> + +struct v4l2_fh; + +/** + * struct v4l2_ioctl_ops - describe operations for each V4L2 ioctl + * + * @vidioc_querycap: pointer to the function that implements + * :ref:`VIDIOC_QUERYCAP <vidioc_querycap>` ioctl + * @vidioc_enum_fmt_vid_cap: pointer to the function that implements + * :ref:`VIDIOC_ENUM_FMT <vidioc_enum_fmt>` ioctl logic + * for video capture in single and multi plane mode + * @vidioc_enum_fmt_vid_overlay: pointer to the function that implements + * :ref:`VIDIOC_ENUM_FMT <vidioc_enum_fmt>` ioctl logic + * for video overlay + * @vidioc_enum_fmt_vid_out: pointer to the function that implements + * :ref:`VIDIOC_ENUM_FMT <vidioc_enum_fmt>` ioctl logic + * for video output in single and multi plane mode + * @vidioc_enum_fmt_sdr_cap: pointer to the function that implements + * :ref:`VIDIOC_ENUM_FMT <vidioc_enum_fmt>` ioctl logic + * for Software Defined Radio capture + * @vidioc_enum_fmt_sdr_out: pointer to the function that implements + * :ref:`VIDIOC_ENUM_FMT <vidioc_enum_fmt>` ioctl logic + * for Software Defined Radio output + * @vidioc_enum_fmt_meta_cap: pointer to the function that implements + * :ref:`VIDIOC_ENUM_FMT <vidioc_enum_fmt>` ioctl logic + * for metadata capture + * @vidioc_enum_fmt_meta_out: pointer to the function that implements + * :ref:`VIDIOC_ENUM_FMT <vidioc_enum_fmt>` ioctl logic + * for metadata output + * @vidioc_g_fmt_vid_cap: pointer to the function that implements + * :ref:`VIDIOC_G_FMT <vidioc_g_fmt>` ioctl logic for video capture + * in single plane mode + * @vidioc_g_fmt_vid_overlay: pointer to the function that implements + * :ref:`VIDIOC_G_FMT <vidioc_g_fmt>` ioctl logic for video overlay + * @vidioc_g_fmt_vid_out: pointer to the function that implements + * :ref:`VIDIOC_G_FMT <vidioc_g_fmt>` ioctl logic for video out + * in single plane mode + * @vidioc_g_fmt_vid_out_overlay: pointer to the function that implements + * :ref:`VIDIOC_G_FMT <vidioc_g_fmt>` ioctl logic for video overlay output + * @vidioc_g_fmt_vbi_cap: pointer to the function that implements + * :ref:`VIDIOC_G_FMT <vidioc_g_fmt>` ioctl logic for raw VBI capture + * @vidioc_g_fmt_vbi_out: pointer to the function that implements + * :ref:`VIDIOC_G_FMT <vidioc_g_fmt>` ioctl logic for raw VBI output + * @vidioc_g_fmt_sliced_vbi_cap: pointer to the function that implements + * :ref:`VIDIOC_G_FMT <vidioc_g_fmt>` ioctl logic for sliced VBI capture + * @vidioc_g_fmt_sliced_vbi_out: pointer to the function that implements + * :ref:`VIDIOC_G_FMT <vidioc_g_fmt>` ioctl logic for sliced VBI output + * @vidioc_g_fmt_vid_cap_mplane: pointer to the function that implements + * :ref:`VIDIOC_G_FMT <vidioc_g_fmt>` ioctl logic for video capture + * in multiple plane mode + * @vidioc_g_fmt_vid_out_mplane: pointer to the function that implements + * :ref:`VIDIOC_G_FMT <vidioc_g_fmt>` ioctl logic for video out + * in multiplane plane mode + * @vidioc_g_fmt_sdr_cap: pointer to the function that implements + * :ref:`VIDIOC_G_FMT <vidioc_g_fmt>` ioctl logic for Software Defined + * Radio capture + * @vidioc_g_fmt_sdr_out: pointer to the function that implements + * :ref:`VIDIOC_G_FMT <vidioc_g_fmt>` ioctl logic for Software Defined + * Radio output + * @vidioc_g_fmt_meta_cap: pointer to the function that implements + * :ref:`VIDIOC_G_FMT <vidioc_g_fmt>` ioctl logic for metadata capture + * @vidioc_g_fmt_meta_out: pointer to the function that implements + * :ref:`VIDIOC_G_FMT <vidioc_g_fmt>` ioctl logic for metadata output + * @vidioc_s_fmt_vid_cap: pointer to the function that implements + * :ref:`VIDIOC_S_FMT <vidioc_g_fmt>` ioctl logic for video capture + * in single plane mode + * @vidioc_s_fmt_vid_overlay: pointer to the function that implements + * :ref:`VIDIOC_S_FMT <vidioc_g_fmt>` ioctl logic for video overlay + * @vidioc_s_fmt_vid_out: pointer to the function that implements + * :ref:`VIDIOC_S_FMT <vidioc_g_fmt>` ioctl logic for video out + * in single plane mode + * @vidioc_s_fmt_vid_out_overlay: pointer to the function that implements + * :ref:`VIDIOC_S_FMT <vidioc_g_fmt>` ioctl logic for video overlay output + * @vidioc_s_fmt_vbi_cap: pointer to the function that implements + * :ref:`VIDIOC_S_FMT <vidioc_g_fmt>` ioctl logic for raw VBI capture + * @vidioc_s_fmt_vbi_out: pointer to the function that implements + * :ref:`VIDIOC_S_FMT <vidioc_g_fmt>` ioctl logic for raw VBI output + * @vidioc_s_fmt_sliced_vbi_cap: pointer to the function that implements + * :ref:`VIDIOC_S_FMT <vidioc_g_fmt>` ioctl logic for sliced VBI capture + * @vidioc_s_fmt_sliced_vbi_out: pointer to the function that implements + * :ref:`VIDIOC_S_FMT <vidioc_g_fmt>` ioctl logic for sliced VBI output + * @vidioc_s_fmt_vid_cap_mplane: pointer to the function that implements + * :ref:`VIDIOC_S_FMT <vidioc_g_fmt>` ioctl logic for video capture + * in multiple plane mode + * @vidioc_s_fmt_vid_out_mplane: pointer to the function that implements + * :ref:`VIDIOC_S_FMT <vidioc_g_fmt>` ioctl logic for video out + * in multiplane plane mode + * @vidioc_s_fmt_sdr_cap: pointer to the function that implements + * :ref:`VIDIOC_S_FMT <vidioc_g_fmt>` ioctl logic for Software Defined + * Radio capture + * @vidioc_s_fmt_sdr_out: pointer to the function that implements + * :ref:`VIDIOC_S_FMT <vidioc_g_fmt>` ioctl logic for Software Defined + * Radio output + * @vidioc_s_fmt_meta_cap: pointer to the function that implements + * :ref:`VIDIOC_S_FMT <vidioc_g_fmt>` ioctl logic for metadata capture + * @vidioc_s_fmt_meta_out: pointer to the function that implements + * :ref:`VIDIOC_S_FMT <vidioc_g_fmt>` ioctl logic for metadata output + * @vidioc_try_fmt_vid_cap: pointer to the function that implements + * :ref:`VIDIOC_TRY_FMT <vidioc_g_fmt>` ioctl logic for video capture + * in single plane mode + * @vidioc_try_fmt_vid_overlay: pointer to the function that implements + * :ref:`VIDIOC_TRY_FMT <vidioc_g_fmt>` ioctl logic for video overlay + * @vidioc_try_fmt_vid_out: pointer to the function that implements + * :ref:`VIDIOC_TRY_FMT <vidioc_g_fmt>` ioctl logic for video out + * in single plane mode + * @vidioc_try_fmt_vid_out_overlay: pointer to the function that implements + * :ref:`VIDIOC_TRY_FMT <vidioc_g_fmt>` ioctl logic for video overlay + * output + * @vidioc_try_fmt_vbi_cap: pointer to the function that implements + * :ref:`VIDIOC_TRY_FMT <vidioc_g_fmt>` ioctl logic for raw VBI capture + * @vidioc_try_fmt_vbi_out: pointer to the function that implements + * :ref:`VIDIOC_TRY_FMT <vidioc_g_fmt>` ioctl logic for raw VBI output + * @vidioc_try_fmt_sliced_vbi_cap: pointer to the function that implements + * :ref:`VIDIOC_TRY_FMT <vidioc_g_fmt>` ioctl logic for sliced VBI + * capture + * @vidioc_try_fmt_sliced_vbi_out: pointer to the function that implements + * :ref:`VIDIOC_TRY_FMT <vidioc_g_fmt>` ioctl logic for sliced VBI output + * @vidioc_try_fmt_vid_cap_mplane: pointer to the function that implements + * :ref:`VIDIOC_TRY_FMT <vidioc_g_fmt>` ioctl logic for video capture + * in multiple plane mode + * @vidioc_try_fmt_vid_out_mplane: pointer to the function that implements + * :ref:`VIDIOC_TRY_FMT <vidioc_g_fmt>` ioctl logic for video out + * in multiplane plane mode + * @vidioc_try_fmt_sdr_cap: pointer to the function that implements + * :ref:`VIDIOC_TRY_FMT <vidioc_g_fmt>` ioctl logic for Software Defined + * Radio capture + * @vidioc_try_fmt_sdr_out: pointer to the function that implements + * :ref:`VIDIOC_TRY_FMT <vidioc_g_fmt>` ioctl logic for Software Defined + * Radio output + * @vidioc_try_fmt_meta_cap: pointer to the function that implements + * :ref:`VIDIOC_TRY_FMT <vidioc_g_fmt>` ioctl logic for metadata capture + * @vidioc_try_fmt_meta_out: pointer to the function that implements + * :ref:`VIDIOC_TRY_FMT <vidioc_g_fmt>` ioctl logic for metadata output + * @vidioc_reqbufs: pointer to the function that implements + * :ref:`VIDIOC_REQBUFS <vidioc_reqbufs>` ioctl + * @vidioc_querybuf: pointer to the function that implements + * :ref:`VIDIOC_QUERYBUF <vidioc_querybuf>` ioctl + * @vidioc_qbuf: pointer to the function that implements + * :ref:`VIDIOC_QBUF <vidioc_qbuf>` ioctl + * @vidioc_expbuf: pointer to the function that implements + * :ref:`VIDIOC_EXPBUF <vidioc_expbuf>` ioctl + * @vidioc_dqbuf: pointer to the function that implements + * :ref:`VIDIOC_DQBUF <vidioc_qbuf>` ioctl + * @vidioc_create_bufs: pointer to the function that implements + * :ref:`VIDIOC_CREATE_BUFS <vidioc_create_bufs>` ioctl + * @vidioc_prepare_buf: pointer to the function that implements + * :ref:`VIDIOC_PREPARE_BUF <vidioc_prepare_buf>` ioctl + * @vidioc_overlay: pointer to the function that implements + * :ref:`VIDIOC_OVERLAY <vidioc_overlay>` ioctl + * @vidioc_g_fbuf: pointer to the function that implements + * :ref:`VIDIOC_G_FBUF <vidioc_g_fbuf>` ioctl + * @vidioc_s_fbuf: pointer to the function that implements + * :ref:`VIDIOC_S_FBUF <vidioc_g_fbuf>` ioctl + * @vidioc_streamon: pointer to the function that implements + * :ref:`VIDIOC_STREAMON <vidioc_streamon>` ioctl + * @vidioc_streamoff: pointer to the function that implements + * :ref:`VIDIOC_STREAMOFF <vidioc_streamon>` ioctl + * @vidioc_g_std: pointer to the function that implements + * :ref:`VIDIOC_G_STD <vidioc_g_std>` ioctl + * @vidioc_s_std: pointer to the function that implements + * :ref:`VIDIOC_S_STD <vidioc_g_std>` ioctl + * @vidioc_querystd: pointer to the function that implements + * :ref:`VIDIOC_QUERYSTD <vidioc_querystd>` ioctl + * @vidioc_enum_input: pointer to the function that implements + * :ref:`VIDIOC_ENUM_INPUT <vidioc_g_input>` ioctl + * @vidioc_g_input: pointer to the function that implements + * :ref:`VIDIOC_G_INPUT <vidioc_g_input>` ioctl + * @vidioc_s_input: pointer to the function that implements + * :ref:`VIDIOC_S_INPUT <vidioc_g_input>` ioctl + * @vidioc_enum_output: pointer to the function that implements + * :ref:`VIDIOC_ENUM_OUTPUT <vidioc_g_output>` ioctl + * @vidioc_g_output: pointer to the function that implements + * :ref:`VIDIOC_G_OUTPUT <vidioc_g_output>` ioctl + * @vidioc_s_output: pointer to the function that implements + * :ref:`VIDIOC_S_OUTPUT <vidioc_g_output>` ioctl + * @vidioc_queryctrl: pointer to the function that implements + * :ref:`VIDIOC_QUERYCTRL <vidioc_queryctrl>` ioctl + * @vidioc_query_ext_ctrl: pointer to the function that implements + * :ref:`VIDIOC_QUERY_EXT_CTRL <vidioc_queryctrl>` ioctl + * @vidioc_g_ctrl: pointer to the function that implements + * :ref:`VIDIOC_G_CTRL <vidioc_g_ctrl>` ioctl + * @vidioc_s_ctrl: pointer to the function that implements + * :ref:`VIDIOC_S_CTRL <vidioc_g_ctrl>` ioctl + * @vidioc_g_ext_ctrls: pointer to the function that implements + * :ref:`VIDIOC_G_EXT_CTRLS <vidioc_g_ext_ctrls>` ioctl + * @vidioc_s_ext_ctrls: pointer to the function that implements + * :ref:`VIDIOC_S_EXT_CTRLS <vidioc_g_ext_ctrls>` ioctl + * @vidioc_try_ext_ctrls: pointer to the function that implements + * :ref:`VIDIOC_TRY_EXT_CTRLS <vidioc_g_ext_ctrls>` ioctl + * @vidioc_querymenu: pointer to the function that implements + * :ref:`VIDIOC_QUERYMENU <vidioc_queryctrl>` ioctl + * @vidioc_enumaudio: pointer to the function that implements + * :ref:`VIDIOC_ENUMAUDIO <vidioc_enumaudio>` ioctl + * @vidioc_g_audio: pointer to the function that implements + * :ref:`VIDIOC_G_AUDIO <vidioc_g_audio>` ioctl + * @vidioc_s_audio: pointer to the function that implements + * :ref:`VIDIOC_S_AUDIO <vidioc_g_audio>` ioctl + * @vidioc_enumaudout: pointer to the function that implements + * :ref:`VIDIOC_ENUMAUDOUT <vidioc_enumaudout>` ioctl + * @vidioc_g_audout: pointer to the function that implements + * :ref:`VIDIOC_G_AUDOUT <vidioc_g_audout>` ioctl + * @vidioc_s_audout: pointer to the function that implements + * :ref:`VIDIOC_S_AUDOUT <vidioc_g_audout>` ioctl + * @vidioc_g_modulator: pointer to the function that implements + * :ref:`VIDIOC_G_MODULATOR <vidioc_g_modulator>` ioctl + * @vidioc_s_modulator: pointer to the function that implements + * :ref:`VIDIOC_S_MODULATOR <vidioc_g_modulator>` ioctl + * @vidioc_g_pixelaspect: pointer to the function that implements + * the pixelaspect part of the :ref:`VIDIOC_CROPCAP <vidioc_cropcap>` ioctl + * @vidioc_g_selection: pointer to the function that implements + * :ref:`VIDIOC_G_SELECTION <vidioc_g_selection>` ioctl + * @vidioc_s_selection: pointer to the function that implements + * :ref:`VIDIOC_S_SELECTION <vidioc_g_selection>` ioctl + * @vidioc_g_jpegcomp: pointer to the function that implements + * :ref:`VIDIOC_G_JPEGCOMP <vidioc_g_jpegcomp>` ioctl + * @vidioc_s_jpegcomp: pointer to the function that implements + * :ref:`VIDIOC_S_JPEGCOMP <vidioc_g_jpegcomp>` ioctl + * @vidioc_g_enc_index: pointer to the function that implements + * :ref:`VIDIOC_G_ENC_INDEX <vidioc_g_enc_index>` ioctl + * @vidioc_encoder_cmd: pointer to the function that implements + * :ref:`VIDIOC_ENCODER_CMD <vidioc_encoder_cmd>` ioctl + * @vidioc_try_encoder_cmd: pointer to the function that implements + * :ref:`VIDIOC_TRY_ENCODER_CMD <vidioc_encoder_cmd>` ioctl + * @vidioc_decoder_cmd: pointer to the function that implements + * :ref:`VIDIOC_DECODER_CMD <vidioc_decoder_cmd>` ioctl + * @vidioc_try_decoder_cmd: pointer to the function that implements + * :ref:`VIDIOC_TRY_DECODER_CMD <vidioc_decoder_cmd>` ioctl + * @vidioc_g_parm: pointer to the function that implements + * :ref:`VIDIOC_G_PARM <vidioc_g_parm>` ioctl + * @vidioc_s_parm: pointer to the function that implements + * :ref:`VIDIOC_S_PARM <vidioc_g_parm>` ioctl + * @vidioc_g_tuner: pointer to the function that implements + * :ref:`VIDIOC_G_TUNER <vidioc_g_tuner>` ioctl + * @vidioc_s_tuner: pointer to the function that implements + * :ref:`VIDIOC_S_TUNER <vidioc_g_tuner>` ioctl + * @vidioc_g_frequency: pointer to the function that implements + * :ref:`VIDIOC_G_FREQUENCY <vidioc_g_frequency>` ioctl + * @vidioc_s_frequency: pointer to the function that implements + * :ref:`VIDIOC_S_FREQUENCY <vidioc_g_frequency>` ioctl + * @vidioc_enum_freq_bands: pointer to the function that implements + * :ref:`VIDIOC_ENUM_FREQ_BANDS <vidioc_enum_freq_bands>` ioctl + * @vidioc_g_sliced_vbi_cap: pointer to the function that implements + * :ref:`VIDIOC_G_SLICED_VBI_CAP <vidioc_g_sliced_vbi_cap>` ioctl + * @vidioc_log_status: pointer to the function that implements + * :ref:`VIDIOC_LOG_STATUS <vidioc_log_status>` ioctl + * @vidioc_s_hw_freq_seek: pointer to the function that implements + * :ref:`VIDIOC_S_HW_FREQ_SEEK <vidioc_s_hw_freq_seek>` ioctl + * @vidioc_g_register: pointer to the function that implements + * :ref:`VIDIOC_DBG_G_REGISTER <vidioc_dbg_g_register>` ioctl + * @vidioc_s_register: pointer to the function that implements + * :ref:`VIDIOC_DBG_S_REGISTER <vidioc_dbg_g_register>` ioctl + * @vidioc_g_chip_info: pointer to the function that implements + * :ref:`VIDIOC_DBG_G_CHIP_INFO <vidioc_dbg_g_chip_info>` ioctl + * @vidioc_enum_framesizes: pointer to the function that implements + * :ref:`VIDIOC_ENUM_FRAMESIZES <vidioc_enum_framesizes>` ioctl + * @vidioc_enum_frameintervals: pointer to the function that implements + * :ref:`VIDIOC_ENUM_FRAMEINTERVALS <vidioc_enum_frameintervals>` ioctl + * @vidioc_s_dv_timings: pointer to the function that implements + * :ref:`VIDIOC_S_DV_TIMINGS <vidioc_g_dv_timings>` ioctl + * @vidioc_g_dv_timings: pointer to the function that implements + * :ref:`VIDIOC_G_DV_TIMINGS <vidioc_g_dv_timings>` ioctl + * @vidioc_query_dv_timings: pointer to the function that implements + * :ref:`VIDIOC_QUERY_DV_TIMINGS <vidioc_query_dv_timings>` ioctl + * @vidioc_enum_dv_timings: pointer to the function that implements + * :ref:`VIDIOC_ENUM_DV_TIMINGS <vidioc_enum_dv_timings>` ioctl + * @vidioc_dv_timings_cap: pointer to the function that implements + * :ref:`VIDIOC_DV_TIMINGS_CAP <vidioc_dv_timings_cap>` ioctl + * @vidioc_g_edid: pointer to the function that implements + * :ref:`VIDIOC_G_EDID <vidioc_g_edid>` ioctl + * @vidioc_s_edid: pointer to the function that implements + * :ref:`VIDIOC_S_EDID <vidioc_g_edid>` ioctl + * @vidioc_subscribe_event: pointer to the function that implements + * :ref:`VIDIOC_SUBSCRIBE_EVENT <vidioc_subscribe_event>` ioctl + * @vidioc_unsubscribe_event: pointer to the function that implements + * :ref:`VIDIOC_UNSUBSCRIBE_EVENT <vidioc_unsubscribe_event>` ioctl + * @vidioc_default: pointed used to allow other ioctls + */ +struct v4l2_ioctl_ops { + /* ioctl callbacks */ + + /* VIDIOC_QUERYCAP handler */ + int (*vidioc_querycap)(struct file *file, void *fh, + struct v4l2_capability *cap); + + /* VIDIOC_ENUM_FMT handlers */ + int (*vidioc_enum_fmt_vid_cap)(struct file *file, void *fh, + struct v4l2_fmtdesc *f); + int (*vidioc_enum_fmt_vid_overlay)(struct file *file, void *fh, + struct v4l2_fmtdesc *f); + int (*vidioc_enum_fmt_vid_out)(struct file *file, void *fh, + struct v4l2_fmtdesc *f); + int (*vidioc_enum_fmt_sdr_cap)(struct file *file, void *fh, + struct v4l2_fmtdesc *f); + int (*vidioc_enum_fmt_sdr_out)(struct file *file, void *fh, + struct v4l2_fmtdesc *f); + int (*vidioc_enum_fmt_meta_cap)(struct file *file, void *fh, + struct v4l2_fmtdesc *f); + int (*vidioc_enum_fmt_meta_out)(struct file *file, void *fh, + struct v4l2_fmtdesc *f); + + /* VIDIOC_G_FMT handlers */ + int (*vidioc_g_fmt_vid_cap)(struct file *file, void *fh, + struct v4l2_format *f); + int (*vidioc_g_fmt_vid_overlay)(struct file *file, void *fh, + struct v4l2_format *f); + int (*vidioc_g_fmt_vid_out)(struct file *file, void *fh, + struct v4l2_format *f); + int (*vidioc_g_fmt_vid_out_overlay)(struct file *file, void *fh, + struct v4l2_format *f); + int (*vidioc_g_fmt_vbi_cap)(struct file *file, void *fh, + struct v4l2_format *f); + int (*vidioc_g_fmt_vbi_out)(struct file *file, void *fh, + struct v4l2_format *f); + int (*vidioc_g_fmt_sliced_vbi_cap)(struct file *file, void *fh, + struct v4l2_format *f); + int (*vidioc_g_fmt_sliced_vbi_out)(struct file *file, void *fh, + struct v4l2_format *f); + int (*vidioc_g_fmt_vid_cap_mplane)(struct file *file, void *fh, + struct v4l2_format *f); + int (*vidioc_g_fmt_vid_out_mplane)(struct file *file, void *fh, + struct v4l2_format *f); + int (*vidioc_g_fmt_sdr_cap)(struct file *file, void *fh, + struct v4l2_format *f); + int (*vidioc_g_fmt_sdr_out)(struct file *file, void *fh, + struct v4l2_format *f); + int (*vidioc_g_fmt_meta_cap)(struct file *file, void *fh, + struct v4l2_format *f); + int (*vidioc_g_fmt_meta_out)(struct file *file, void *fh, + struct v4l2_format *f); + + /* VIDIOC_S_FMT handlers */ + int (*vidioc_s_fmt_vid_cap)(struct file *file, void *fh, + struct v4l2_format *f); + int (*vidioc_s_fmt_vid_overlay)(struct file *file, void *fh, + struct v4l2_format *f); + int (*vidioc_s_fmt_vid_out)(struct file *file, void *fh, + struct v4l2_format *f); + int (*vidioc_s_fmt_vid_out_overlay)(struct file *file, void *fh, + struct v4l2_format *f); + int (*vidioc_s_fmt_vbi_cap)(struct file *file, void *fh, + struct v4l2_format *f); + int (*vidioc_s_fmt_vbi_out)(struct file *file, void *fh, + struct v4l2_format *f); + int (*vidioc_s_fmt_sliced_vbi_cap)(struct file *file, void *fh, + struct v4l2_format *f); + int (*vidioc_s_fmt_sliced_vbi_out)(struct file *file, void *fh, + struct v4l2_format *f); + int (*vidioc_s_fmt_vid_cap_mplane)(struct file *file, void *fh, + struct v4l2_format *f); + int (*vidioc_s_fmt_vid_out_mplane)(struct file *file, void *fh, + struct v4l2_format *f); + int (*vidioc_s_fmt_sdr_cap)(struct file *file, void *fh, + struct v4l2_format *f); + int (*vidioc_s_fmt_sdr_out)(struct file *file, void *fh, + struct v4l2_format *f); + int (*vidioc_s_fmt_meta_cap)(struct file *file, void *fh, + struct v4l2_format *f); + int (*vidioc_s_fmt_meta_out)(struct file *file, void *fh, + struct v4l2_format *f); + + /* VIDIOC_TRY_FMT handlers */ + int (*vidioc_try_fmt_vid_cap)(struct file *file, void *fh, + struct v4l2_format *f); + int (*vidioc_try_fmt_vid_overlay)(struct file *file, void *fh, + struct v4l2_format *f); + int (*vidioc_try_fmt_vid_out)(struct file *file, void *fh, + struct v4l2_format *f); + int (*vidioc_try_fmt_vid_out_overlay)(struct file *file, void *fh, + struct v4l2_format *f); + int (*vidioc_try_fmt_vbi_cap)(struct file *file, void *fh, + struct v4l2_format *f); + int (*vidioc_try_fmt_vbi_out)(struct file *file, void *fh, + struct v4l2_format *f); + int (*vidioc_try_fmt_sliced_vbi_cap)(struct file *file, void *fh, + struct v4l2_format *f); + int (*vidioc_try_fmt_sliced_vbi_out)(struct file *file, void *fh, + struct v4l2_format *f); + int (*vidioc_try_fmt_vid_cap_mplane)(struct file *file, void *fh, + struct v4l2_format *f); + int (*vidioc_try_fmt_vid_out_mplane)(struct file *file, void *fh, + struct v4l2_format *f); + int (*vidioc_try_fmt_sdr_cap)(struct file *file, void *fh, + struct v4l2_format *f); + int (*vidioc_try_fmt_sdr_out)(struct file *file, void *fh, + struct v4l2_format *f); + int (*vidioc_try_fmt_meta_cap)(struct file *file, void *fh, + struct v4l2_format *f); + int (*vidioc_try_fmt_meta_out)(struct file *file, void *fh, + struct v4l2_format *f); + + /* Buffer handlers */ + int (*vidioc_reqbufs)(struct file *file, void *fh, + struct v4l2_requestbuffers *b); + int (*vidioc_querybuf)(struct file *file, void *fh, + struct v4l2_buffer *b); + int (*vidioc_qbuf)(struct file *file, void *fh, + struct v4l2_buffer *b); + int (*vidioc_expbuf)(struct file *file, void *fh, + struct v4l2_exportbuffer *e); + int (*vidioc_dqbuf)(struct file *file, void *fh, + struct v4l2_buffer *b); + + int (*vidioc_create_bufs)(struct file *file, void *fh, + struct v4l2_create_buffers *b); + int (*vidioc_prepare_buf)(struct file *file, void *fh, + struct v4l2_buffer *b); + + int (*vidioc_overlay)(struct file *file, void *fh, unsigned int i); + int (*vidioc_g_fbuf)(struct file *file, void *fh, + struct v4l2_framebuffer *a); + int (*vidioc_s_fbuf)(struct file *file, void *fh, + const struct v4l2_framebuffer *a); + + /* Stream on/off */ + int (*vidioc_streamon)(struct file *file, void *fh, + enum v4l2_buf_type i); + int (*vidioc_streamoff)(struct file *file, void *fh, + enum v4l2_buf_type i); + + /* + * Standard handling + * + * Note: ENUMSTD is handled by videodev.c + */ + int (*vidioc_g_std)(struct file *file, void *fh, v4l2_std_id *norm); + int (*vidioc_s_std)(struct file *file, void *fh, v4l2_std_id norm); + int (*vidioc_querystd)(struct file *file, void *fh, v4l2_std_id *a); + + /* Input handling */ + int (*vidioc_enum_input)(struct file *file, void *fh, + struct v4l2_input *inp); + int (*vidioc_g_input)(struct file *file, void *fh, unsigned int *i); + int (*vidioc_s_input)(struct file *file, void *fh, unsigned int i); + + /* Output handling */ + int (*vidioc_enum_output)(struct file *file, void *fh, + struct v4l2_output *a); + int (*vidioc_g_output)(struct file *file, void *fh, unsigned int *i); + int (*vidioc_s_output)(struct file *file, void *fh, unsigned int i); + + /* Control handling */ + int (*vidioc_queryctrl)(struct file *file, void *fh, + struct v4l2_queryctrl *a); + int (*vidioc_query_ext_ctrl)(struct file *file, void *fh, + struct v4l2_query_ext_ctrl *a); + int (*vidioc_g_ctrl)(struct file *file, void *fh, + struct v4l2_control *a); + int (*vidioc_s_ctrl)(struct file *file, void *fh, + struct v4l2_control *a); + int (*vidioc_g_ext_ctrls)(struct file *file, void *fh, + struct v4l2_ext_controls *a); + int (*vidioc_s_ext_ctrls)(struct file *file, void *fh, + struct v4l2_ext_controls *a); + int (*vidioc_try_ext_ctrls)(struct file *file, void *fh, + struct v4l2_ext_controls *a); + int (*vidioc_querymenu)(struct file *file, void *fh, + struct v4l2_querymenu *a); + + /* Audio ioctls */ + int (*vidioc_enumaudio)(struct file *file, void *fh, + struct v4l2_audio *a); + int (*vidioc_g_audio)(struct file *file, void *fh, + struct v4l2_audio *a); + int (*vidioc_s_audio)(struct file *file, void *fh, + const struct v4l2_audio *a); + + /* Audio out ioctls */ + int (*vidioc_enumaudout)(struct file *file, void *fh, + struct v4l2_audioout *a); + int (*vidioc_g_audout)(struct file *file, void *fh, + struct v4l2_audioout *a); + int (*vidioc_s_audout)(struct file *file, void *fh, + const struct v4l2_audioout *a); + int (*vidioc_g_modulator)(struct file *file, void *fh, + struct v4l2_modulator *a); + int (*vidioc_s_modulator)(struct file *file, void *fh, + const struct v4l2_modulator *a); + /* Crop ioctls */ + int (*vidioc_g_pixelaspect)(struct file *file, void *fh, + int buf_type, struct v4l2_fract *aspect); + int (*vidioc_g_selection)(struct file *file, void *fh, + struct v4l2_selection *s); + int (*vidioc_s_selection)(struct file *file, void *fh, + struct v4l2_selection *s); + /* Compression ioctls */ + int (*vidioc_g_jpegcomp)(struct file *file, void *fh, + struct v4l2_jpegcompression *a); + int (*vidioc_s_jpegcomp)(struct file *file, void *fh, + const struct v4l2_jpegcompression *a); + int (*vidioc_g_enc_index)(struct file *file, void *fh, + struct v4l2_enc_idx *a); + int (*vidioc_encoder_cmd)(struct file *file, void *fh, + struct v4l2_encoder_cmd *a); + int (*vidioc_try_encoder_cmd)(struct file *file, void *fh, + struct v4l2_encoder_cmd *a); + int (*vidioc_decoder_cmd)(struct file *file, void *fh, + struct v4l2_decoder_cmd *a); + int (*vidioc_try_decoder_cmd)(struct file *file, void *fh, + struct v4l2_decoder_cmd *a); + + /* Stream type-dependent parameter ioctls */ + int (*vidioc_g_parm)(struct file *file, void *fh, + struct v4l2_streamparm *a); + int (*vidioc_s_parm)(struct file *file, void *fh, + struct v4l2_streamparm *a); + + /* Tuner ioctls */ + int (*vidioc_g_tuner)(struct file *file, void *fh, + struct v4l2_tuner *a); + int (*vidioc_s_tuner)(struct file *file, void *fh, + const struct v4l2_tuner *a); + int (*vidioc_g_frequency)(struct file *file, void *fh, + struct v4l2_frequency *a); + int (*vidioc_s_frequency)(struct file *file, void *fh, + const struct v4l2_frequency *a); + int (*vidioc_enum_freq_bands)(struct file *file, void *fh, + struct v4l2_frequency_band *band); + + /* Sliced VBI cap */ + int (*vidioc_g_sliced_vbi_cap)(struct file *file, void *fh, + struct v4l2_sliced_vbi_cap *a); + + /* Log status ioctl */ + int (*vidioc_log_status)(struct file *file, void *fh); + + int (*vidioc_s_hw_freq_seek)(struct file *file, void *fh, + const struct v4l2_hw_freq_seek *a); + + /* Debugging ioctls */ +#ifdef CONFIG_VIDEO_ADV_DEBUG + int (*vidioc_g_register)(struct file *file, void *fh, + struct v4l2_dbg_register *reg); + int (*vidioc_s_register)(struct file *file, void *fh, + const struct v4l2_dbg_register *reg); + + int (*vidioc_g_chip_info)(struct file *file, void *fh, + struct v4l2_dbg_chip_info *chip); +#endif + + int (*vidioc_enum_framesizes)(struct file *file, void *fh, + struct v4l2_frmsizeenum *fsize); + + int (*vidioc_enum_frameintervals)(struct file *file, void *fh, + struct v4l2_frmivalenum *fival); + + /* DV Timings IOCTLs */ + int (*vidioc_s_dv_timings)(struct file *file, void *fh, + struct v4l2_dv_timings *timings); + int (*vidioc_g_dv_timings)(struct file *file, void *fh, + struct v4l2_dv_timings *timings); + int (*vidioc_query_dv_timings)(struct file *file, void *fh, + struct v4l2_dv_timings *timings); + int (*vidioc_enum_dv_timings)(struct file *file, void *fh, + struct v4l2_enum_dv_timings *timings); + int (*vidioc_dv_timings_cap)(struct file *file, void *fh, + struct v4l2_dv_timings_cap *cap); + int (*vidioc_g_edid)(struct file *file, void *fh, + struct v4l2_edid *edid); + int (*vidioc_s_edid)(struct file *file, void *fh, + struct v4l2_edid *edid); + + int (*vidioc_subscribe_event)(struct v4l2_fh *fh, + const struct v4l2_event_subscription *sub); + int (*vidioc_unsubscribe_event)(struct v4l2_fh *fh, + const struct v4l2_event_subscription *sub); + + /* For other private ioctls */ + long (*vidioc_default)(struct file *file, void *fh, + bool valid_prio, unsigned int cmd, void *arg); +}; + + +/* v4l debugging and diagnostics */ + +/* Device debug flags to be used with the video device debug attribute */ + +/* Just log the ioctl name + error code */ +#define V4L2_DEV_DEBUG_IOCTL 0x01 +/* Log the ioctl name arguments + error code */ +#define V4L2_DEV_DEBUG_IOCTL_ARG 0x02 +/* Log the file operations open, release, mmap and get_unmapped_area */ +#define V4L2_DEV_DEBUG_FOP 0x04 +/* Log the read and write file operations and the VIDIOC_(D)QBUF ioctls */ +#define V4L2_DEV_DEBUG_STREAMING 0x08 +/* Log poll() */ +#define V4L2_DEV_DEBUG_POLL 0x10 +/* Log controls */ +#define V4L2_DEV_DEBUG_CTRL 0x20 + +/* Video standard functions */ + +/** + * v4l2_norm_to_name - Ancillary routine to analog TV standard name from its ID. + * + * @id: analog TV standard ID. + * + * Return: returns a string with the name of the analog TV standard. + * If the standard is not found or if @id points to multiple standard, + * it returns "Unknown". + */ +const char *v4l2_norm_to_name(v4l2_std_id id); + +/** + * v4l2_video_std_frame_period - Ancillary routine that fills a + * struct &v4l2_fract pointer with the default framerate fraction. + * + * @id: analog TV standard ID. + * @frameperiod: struct &v4l2_fract pointer to be filled + * + */ +void v4l2_video_std_frame_period(int id, struct v4l2_fract *frameperiod); + +/** + * v4l2_video_std_construct - Ancillary routine that fills in the fields of + * a &v4l2_standard structure according to the @id parameter. + * + * @vs: struct &v4l2_standard pointer to be filled + * @id: analog TV standard ID. + * @name: name of the standard to be used + * + * .. note:: + * + * This ancillary routine is obsolete. Shouldn't be used on newer drivers. + */ +int v4l2_video_std_construct(struct v4l2_standard *vs, + int id, const char *name); + +/** + * v4l_video_std_enumstd - Ancillary routine that fills in the fields of + * a &v4l2_standard structure according to the @id and @vs->index + * parameters. + * + * @vs: struct &v4l2_standard pointer to be filled. + * @id: analog TV standard ID. + * + */ +int v4l_video_std_enumstd(struct v4l2_standard *vs, v4l2_std_id id); + +/** + * v4l_printk_ioctl - Ancillary routine that prints the ioctl in a + * human-readable format. + * + * @prefix: prefix to be added at the ioctl prints. + * @cmd: ioctl name + * + * .. note:: + * + * If prefix != %NULL, then it will issue a + * ``printk(KERN_DEBUG "%s: ", prefix)`` first. + */ +void v4l_printk_ioctl(const char *prefix, unsigned int cmd); + +struct video_device; + +/* names for fancy debug output */ +extern const char *v4l2_field_names[]; +extern const char *v4l2_type_names[]; + +#ifdef CONFIG_COMPAT +/** + * v4l2_compat_ioctl32 -32 Bits compatibility layer for 64 bits processors + * + * @file: Pointer to struct &file. + * @cmd: Ioctl name. + * @arg: Ioctl argument. + */ +long int v4l2_compat_ioctl32(struct file *file, unsigned int cmd, + unsigned long arg); +#endif + +/** + * typedef v4l2_kioctl - Typedef used to pass an ioctl handler. + * + * @file: Pointer to struct &file. + * @cmd: Ioctl name. + * @arg: Ioctl argument. + */ +typedef long (*v4l2_kioctl)(struct file *file, unsigned int cmd, void *arg); + +/** + * video_usercopy - copies data from/to userspace memory when an ioctl is + * issued. + * + * @file: Pointer to struct &file. + * @cmd: Ioctl name. + * @arg: Ioctl argument. + * @func: function that will handle the ioctl + * + * .. note:: + * + * This routine should be used only inside the V4L2 core. + */ +long int video_usercopy(struct file *file, unsigned int cmd, + unsigned long int arg, v4l2_kioctl func); + +/** + * video_ioctl2 - Handles a V4L2 ioctl. + * + * @file: Pointer to struct &file. + * @cmd: Ioctl name. + * @arg: Ioctl argument. + * + * Method used to hancle an ioctl. Should be used to fill the + * &v4l2_ioctl_ops.unlocked_ioctl on all V4L2 drivers. + */ +long int video_ioctl2(struct file *file, + unsigned int cmd, unsigned long int arg); + +/* + * The user space interpretation of the 'v4l2_event' differs + * based on the 'time_t' definition on 32-bit architectures, so + * the kernel has to handle both. + * This is the old version for 32-bit architectures. + */ +struct v4l2_event_time32 { + __u32 type; + union { + struct v4l2_event_vsync vsync; + struct v4l2_event_ctrl ctrl; + struct v4l2_event_frame_sync frame_sync; + struct v4l2_event_src_change src_change; + struct v4l2_event_motion_det motion_det; + __u8 data[64]; + } u; + __u32 pending; + __u32 sequence; + struct old_timespec32 timestamp; + __u32 id; + __u32 reserved[8]; +}; + +#define VIDIOC_DQEVENT_TIME32 _IOR('V', 89, struct v4l2_event_time32) + +struct v4l2_buffer_time32 { + __u32 index; + __u32 type; + __u32 bytesused; + __u32 flags; + __u32 field; + struct old_timeval32 timestamp; + struct v4l2_timecode timecode; + __u32 sequence; + + /* memory location */ + __u32 memory; + union { + __u32 offset; + unsigned long userptr; + struct v4l2_plane *planes; + __s32 fd; + } m; + __u32 length; + __u32 reserved2; + union { + __s32 request_fd; + __u32 reserved; + }; +}; +#define VIDIOC_QUERYBUF_TIME32 _IOWR('V', 9, struct v4l2_buffer_time32) +#define VIDIOC_QBUF_TIME32 _IOWR('V', 15, struct v4l2_buffer_time32) +#define VIDIOC_DQBUF_TIME32 _IOWR('V', 17, struct v4l2_buffer_time32) +#define VIDIOC_PREPARE_BUF_TIME32 _IOWR('V', 93, struct v4l2_buffer_time32) + +#endif /* _V4L2_IOCTL_H */ diff --git a/include/media/v4l2-jpeg.h b/include/media/v4l2-jpeg.h new file mode 100644 index 000000000..ddba2a56c --- /dev/null +++ b/include/media/v4l2-jpeg.h @@ -0,0 +1,135 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * V4L2 JPEG helpers header + * + * Copyright (C) 2019 Pengutronix, Philipp Zabel <kernel@pengutronix.de> + * + * For reference, see JPEG ITU-T.81 (ISO/IEC 10918-1) + */ + +#ifndef _V4L2_JPEG_H +#define _V4L2_JPEG_H + +#include <linux/v4l2-controls.h> + +#define V4L2_JPEG_MAX_COMPONENTS 4 +#define V4L2_JPEG_MAX_TABLES 4 + +/** + * struct v4l2_jpeg_reference - reference into the JPEG buffer + * @start: pointer to the start of the referenced segment or table + * @length: size of the referenced segment or table + * + * Wnen referencing marker segments, start points right after the marker code, + * and length is the size of the segment parameters, excluding the marker code. + */ +struct v4l2_jpeg_reference { + u8 *start; + size_t length; +}; + +/* B.2.2 Frame header syntax */ + +/** + * struct v4l2_jpeg_frame_component_spec - frame component-specification + * @component_identifier: C[i] + * @horizontal_sampling_factor: H[i] + * @vertical_sampling_factor: V[i] + * @quantization_table_selector: quantization table destination selector Tq[i] + */ +struct v4l2_jpeg_frame_component_spec { + u8 component_identifier; + u8 horizontal_sampling_factor; + u8 vertical_sampling_factor; + u8 quantization_table_selector; +}; + +/** + * struct v4l2_jpeg_frame_header - JPEG frame header + * @height: Y + * @width: X + * @precision: P + * @num_components: Nf + * @component: component-specification, see v4l2_jpeg_frame_component_spec + * @subsampling: decoded subsampling from component-specification + */ +struct v4l2_jpeg_frame_header { + u16 height; + u16 width; + u8 precision; + u8 num_components; + struct v4l2_jpeg_frame_component_spec component[V4L2_JPEG_MAX_COMPONENTS]; + enum v4l2_jpeg_chroma_subsampling subsampling; +}; + +/* B.2.3 Scan header syntax */ + +/** + * struct v4l2_jpeg_scan_component_spec - scan component-specification + * @component_selector: Cs[j] + * @dc_entropy_coding_table_selector: Td[j] + * @ac_entropy_coding_table_selector: Ta[j] + */ +struct v4l2_jpeg_scan_component_spec { + u8 component_selector; + u8 dc_entropy_coding_table_selector; + u8 ac_entropy_coding_table_selector; +}; + +/** + * struct v4l2_jpeg_scan_header - JPEG scan header + * @num_components: Ns + * @component: component-specification, see v4l2_jpeg_scan_component_spec + */ +struct v4l2_jpeg_scan_header { + u8 num_components; /* Ns */ + struct v4l2_jpeg_scan_component_spec component[V4L2_JPEG_MAX_COMPONENTS]; + /* Ss, Se, Ah, and Al are not used by any driver */ +}; + +/** + * struct v4l2_jpeg_header - parsed JPEG header + * @sof: pointer to frame header and size + * @sos: pointer to scan header and size + * @dht: pointers to huffman tables and sizes + * @dqt: pointers to quantization tables and sizes + * @frame: parsed frame header + * @scan: pointer to parsed scan header, optional + * @quantization_tables: references to four quantization tables, optional + * @huffman_tables: references to four Huffman tables in DC0, DC1, AC0, AC1 + * order, optional + * @restart_interval: number of MCU per restart interval, Ri + * @ecs_offset: buffer offset in bytes to the entropy coded segment + * + * When this structure is passed to v4l2_jpeg_parse_header, the optional scan, + * quantization_tables, and huffman_tables pointers must be initialized to NULL + * or point at valid memory. + */ +struct v4l2_jpeg_header { + struct v4l2_jpeg_reference sof; + struct v4l2_jpeg_reference sos; + unsigned int num_dht; + struct v4l2_jpeg_reference dht[V4L2_JPEG_MAX_TABLES]; + unsigned int num_dqt; + struct v4l2_jpeg_reference dqt[V4L2_JPEG_MAX_TABLES]; + + struct v4l2_jpeg_frame_header frame; + struct v4l2_jpeg_scan_header *scan; + struct v4l2_jpeg_reference *quantization_tables; + struct v4l2_jpeg_reference *huffman_tables; + u16 restart_interval; + size_t ecs_offset; +}; + +int v4l2_jpeg_parse_header(void *buf, size_t len, struct v4l2_jpeg_header *out); + +int v4l2_jpeg_parse_frame_header(void *buf, size_t len, + struct v4l2_jpeg_frame_header *frame_header); +int v4l2_jpeg_parse_scan_header(void *buf, size_t len, + struct v4l2_jpeg_scan_header *scan_header); +int v4l2_jpeg_parse_quantization_tables(void *buf, size_t len, u8 precision, + struct v4l2_jpeg_reference *q_tables); +int v4l2_jpeg_parse_huffman_tables(void *buf, size_t len, + struct v4l2_jpeg_reference *huffman_tables); + +#endif diff --git a/include/media/v4l2-mc.h b/include/media/v4l2-mc.h new file mode 100644 index 000000000..bdaa5f2f8 --- /dev/null +++ b/include/media/v4l2-mc.h @@ -0,0 +1,217 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * v4l2-mc.h - Media Controller V4L2 types and prototypes + * + * Copyright (C) 2016 Mauro Carvalho Chehab <mchehab@kernel.org> + * Copyright (C) 2006-2010 Nokia Corporation + * Copyright (c) 2016 Intel Corporation. + */ + +#ifndef _V4L2_MC_H +#define _V4L2_MC_H + +#include <media/media-device.h> +#include <media/v4l2-dev.h> +#include <media/v4l2-subdev.h> +#include <linux/types.h> + +/* We don't need to include pci.h or usb.h here */ +struct pci_dev; +struct usb_device; + +#ifdef CONFIG_MEDIA_CONTROLLER +/** + * v4l2_mc_create_media_graph() - create Media Controller links at the graph. + * + * @mdev: pointer to the &media_device struct. + * + * Add links between the entities commonly found on PC customer's hardware at + * the V4L2 side: camera sensors, audio and video PLL-IF decoders, tuners, + * analog TV decoder and I/O entities (video, VBI and Software Defined Radio). + * + * .. note:: + * + * Webcams are modelled on a very simple way: the sensor is + * connected directly to the I/O entity. All dirty details, like + * scaler and crop HW are hidden. While such mapping is enough for v4l2 + * interface centric PC-consumer's hardware, V4L2 subdev centric camera + * hardware should not use this routine, as it will not build the right graph. + */ +int v4l2_mc_create_media_graph(struct media_device *mdev); + +/** + * v4l_enable_media_source() - Hold media source for exclusive use + * if free + * + * @vdev: pointer to struct video_device + * + * This interface calls enable_source handler to determine if + * media source is free for use. The enable_source handler is + * responsible for checking is the media source is free and + * start a pipeline between the media source and the media + * entity associated with the video device. This interface + * should be called from v4l2-core and dvb-core interfaces + * that change the source configuration. + * + * Return: returns zero on success or a negative error code. + */ +int v4l_enable_media_source(struct video_device *vdev); + +/** + * v4l_disable_media_source() - Release media source + * + * @vdev: pointer to struct video_device + * + * This interface calls disable_source handler to release + * the media source. The disable_source handler stops the + * active media pipeline between the media source and the + * media entity associated with the video device. + * + * Return: returns zero on success or a negative error code. + */ +void v4l_disable_media_source(struct video_device *vdev); + +/* + * v4l_vb2q_enable_media_tuner - Hold media source for exclusive use + * if free. + * @q - pointer to struct vb2_queue + * + * Wrapper for v4l_enable_media_source(). This function should + * be called from v4l2-core to enable the media source with + * pointer to struct vb2_queue as the input argument. Some + * v4l2-core interfaces don't have access to video device and + * this interface finds the struct video_device for the q and + * calls v4l_enable_media_source(). + */ +int v4l_vb2q_enable_media_source(struct vb2_queue *q); + +/** + * v4l2_create_fwnode_links_to_pad - Create fwnode-based links from a + * source subdev to a sink subdev pad. + * + * @src_sd: pointer to a source subdev + * @sink: pointer to a subdev sink pad + * + * This function searches for fwnode endpoint connections from a source + * subdevice to a single sink pad, and if suitable connections are found, + * translates them into media links to that pad. The function can be + * called by the sink subdevice, in its v4l2-async notifier subdev bound + * callback, to create links from a bound source subdevice. + * + * .. note:: + * + * Any sink subdevice that calls this function must implement the + * .get_fwnode_pad media operation in order to verify endpoints passed + * to the sink are owned by the sink. + * + * Return 0 on success or a negative error code on failure. + */ +int v4l2_create_fwnode_links_to_pad(struct v4l2_subdev *src_sd, + struct media_pad *sink); + +/** + * v4l2_create_fwnode_links - Create fwnode-based links from a source + * subdev to a sink subdev. + * + * @src_sd: pointer to a source subdevice + * @sink_sd: pointer to a sink subdevice + * + * This function searches for any and all fwnode endpoint connections + * between source and sink subdevices, and translates them into media + * links. The function can be called by the sink subdevice, in its + * v4l2-async notifier subdev bound callback, to create all links from + * a bound source subdevice. + * + * .. note:: + * + * Any sink subdevice that calls this function must implement the + * .get_fwnode_pad media operation in order to verify endpoints passed + * to the sink are owned by the sink. + * + * Return 0 on success or a negative error code on failure. + */ +int v4l2_create_fwnode_links(struct v4l2_subdev *src_sd, + struct v4l2_subdev *sink_sd); + +/** + * v4l2_pipeline_pm_get - Increase the use count of a pipeline + * @entity: The root entity of a pipeline + * + * Update the use count of all entities in the pipeline and power entities on. + * + * This function is intended to be called in video node open. It uses + * struct media_entity.use_count to track the power status. The use + * of this function should be paired with v4l2_pipeline_link_notify(). + * + * Return 0 on success or a negative error code on failure. + */ +int v4l2_pipeline_pm_get(struct media_entity *entity); + +/** + * v4l2_pipeline_pm_put - Decrease the use count of a pipeline + * @entity: The root entity of a pipeline + * + * Update the use count of all entities in the pipeline and power entities off. + * + * This function is intended to be called in video node release. It uses + * struct media_entity.use_count to track the power status. The use + * of this function should be paired with v4l2_pipeline_link_notify(). + */ +void v4l2_pipeline_pm_put(struct media_entity *entity); + + +/** + * v4l2_pipeline_link_notify - Link management notification callback + * @link: The link + * @flags: New link flags that will be applied + * @notification: The link's state change notification type (MEDIA_DEV_NOTIFY_*) + * + * React to link management on powered pipelines by updating the use count of + * all entities in the source and sink sides of the link. Entities are powered + * on or off accordingly. The use of this function should be paired + * with v4l2_pipeline_pm_{get,put}(). + * + * Return 0 on success or a negative error code on failure. Powering entities + * off is assumed to never fail. This function will not fail for disconnection + * events. + */ +int v4l2_pipeline_link_notify(struct media_link *link, u32 flags, + unsigned int notification); + +#else /* CONFIG_MEDIA_CONTROLLER */ + +static inline int v4l2_mc_create_media_graph(struct media_device *mdev) +{ + return 0; +} + +static inline int v4l_enable_media_source(struct video_device *vdev) +{ + return 0; +} + +static inline void v4l_disable_media_source(struct video_device *vdev) +{ +} + +static inline int v4l_vb2q_enable_media_source(struct vb2_queue *q) +{ + return 0; +} + +static inline int v4l2_pipeline_pm_get(struct media_entity *entity) +{ + return 0; +} + +static inline void v4l2_pipeline_pm_put(struct media_entity *entity) +{} + +static inline int v4l2_pipeline_link_notify(struct media_link *link, u32 flags, + unsigned int notification) +{ + return 0; +} + +#endif /* CONFIG_MEDIA_CONTROLLER */ +#endif /* _V4L2_MC_H */ diff --git a/include/media/v4l2-mediabus.h b/include/media/v4l2-mediabus.h new file mode 100644 index 000000000..c20e2dc6d --- /dev/null +++ b/include/media/v4l2-mediabus.h @@ -0,0 +1,212 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Media Bus API header + * + * Copyright (C) 2009, Guennadi Liakhovetski <g.liakhovetski@gmx.de> + */ + +#ifndef V4L2_MEDIABUS_H +#define V4L2_MEDIABUS_H + +#include <linux/v4l2-mediabus.h> +#include <linux/bitops.h> + +/* + * How to use the V4L2_MBUS_* flags: + * Flags are defined for each of the possible states and values of a media + * bus configuration parameter. One and only one bit of each group of flags + * shall be set by the users of the v4l2_subdev_pad_ops.get_mbus_config and + * v4l2_subdev_pad_ops.set_mbus_config operations to ensure that no + * conflicting settings are specified when reporting and setting the media bus + * configuration with the two operations respectively. For example, it is + * invalid to set or clear both the V4L2_MBUS_HSYNC_ACTIVE_HIGH and the + * V4L2_MBUS_HSYNC_ACTIVE_LOW flag at the same time. Instead either flag + * V4L2_MBUS_HSYNC_ACTIVE_HIGH or flag V4L2_MBUS_HSYNC_ACTIVE_LOW shall be + * set. The same is true for the V4L2_MBUS_CSI2_1/2/3/4_LANE flags group: only + * one of these four bits shall be set. + * + * TODO: replace the existing V4L2_MBUS_* flags with structures of fields + * to avoid conflicting settings. + * + * In example: + * #define V4L2_MBUS_HSYNC_ACTIVE_HIGH BIT(2) + * #define V4L2_MBUS_HSYNC_ACTIVE_LOW BIT(3) + * will be replaced by a field whose value reports the intended active state of + * the signal: + * unsigned int v4l2_mbus_hsync_active : 1; + */ + +/* Parallel flags */ +/* + * The client runs in master or in slave mode. By "Master mode" an operation + * mode is meant, when the client (e.g., a camera sensor) is producing + * horizontal and vertical synchronisation. In "Slave mode" the host is + * providing these signals to the slave. + */ +#define V4L2_MBUS_MASTER BIT(0) +#define V4L2_MBUS_SLAVE BIT(1) +/* + * Signal polarity flags + * Note: in BT.656 mode HSYNC, FIELD, and VSYNC are unused + * V4L2_MBUS_[HV]SYNC* flags should be also used for specifying + * configuration of hardware that uses [HV]REF signals + */ +#define V4L2_MBUS_HSYNC_ACTIVE_HIGH BIT(2) +#define V4L2_MBUS_HSYNC_ACTIVE_LOW BIT(3) +#define V4L2_MBUS_VSYNC_ACTIVE_HIGH BIT(4) +#define V4L2_MBUS_VSYNC_ACTIVE_LOW BIT(5) +#define V4L2_MBUS_PCLK_SAMPLE_RISING BIT(6) +#define V4L2_MBUS_PCLK_SAMPLE_FALLING BIT(7) +#define V4L2_MBUS_DATA_ACTIVE_HIGH BIT(8) +#define V4L2_MBUS_DATA_ACTIVE_LOW BIT(9) +/* FIELD = 0/1 - Field1 (odd)/Field2 (even) */ +#define V4L2_MBUS_FIELD_EVEN_HIGH BIT(10) +/* FIELD = 1/0 - Field1 (odd)/Field2 (even) */ +#define V4L2_MBUS_FIELD_EVEN_LOW BIT(11) +/* Active state of Sync-on-green (SoG) signal, 0/1 for LOW/HIGH respectively. */ +#define V4L2_MBUS_VIDEO_SOG_ACTIVE_HIGH BIT(12) +#define V4L2_MBUS_VIDEO_SOG_ACTIVE_LOW BIT(13) +#define V4L2_MBUS_DATA_ENABLE_HIGH BIT(14) +#define V4L2_MBUS_DATA_ENABLE_LOW BIT(15) + +/* Serial flags */ +/* CSI-2 D-PHY number of data lanes. */ +#define V4L2_MBUS_CSI2_1_LANE BIT(0) +#define V4L2_MBUS_CSI2_2_LANE BIT(1) +#define V4L2_MBUS_CSI2_3_LANE BIT(2) +#define V4L2_MBUS_CSI2_4_LANE BIT(3) +/* CSI-2 Virtual Channel identifiers. */ +#define V4L2_MBUS_CSI2_CHANNEL_0 BIT(4) +#define V4L2_MBUS_CSI2_CHANNEL_1 BIT(5) +#define V4L2_MBUS_CSI2_CHANNEL_2 BIT(6) +#define V4L2_MBUS_CSI2_CHANNEL_3 BIT(7) +/* Clock non-continuous mode support. */ +#define V4L2_MBUS_CSI2_CONTINUOUS_CLOCK BIT(8) +#define V4L2_MBUS_CSI2_NONCONTINUOUS_CLOCK BIT(9) + +#define V4L2_MBUS_CSI2_LANES (V4L2_MBUS_CSI2_1_LANE | \ + V4L2_MBUS_CSI2_2_LANE | \ + V4L2_MBUS_CSI2_3_LANE | \ + V4L2_MBUS_CSI2_4_LANE) +#define V4L2_MBUS_CSI2_CHANNELS (V4L2_MBUS_CSI2_CHANNEL_0 | \ + V4L2_MBUS_CSI2_CHANNEL_1 | \ + V4L2_MBUS_CSI2_CHANNEL_2 | \ + V4L2_MBUS_CSI2_CHANNEL_3) + +/** + * enum v4l2_mbus_type - media bus type + * @V4L2_MBUS_UNKNOWN: unknown bus type, no V4L2 mediabus configuration + * @V4L2_MBUS_PARALLEL: parallel interface with hsync and vsync + * @V4L2_MBUS_BT656: parallel interface with embedded synchronisation, can + * also be used for BT.1120 + * @V4L2_MBUS_CSI1: MIPI CSI-1 serial interface + * @V4L2_MBUS_CCP2: CCP2 (Compact Camera Port 2) + * @V4L2_MBUS_CSI2_DPHY: MIPI CSI-2 serial interface, with D-PHY + * @V4L2_MBUS_CSI2_CPHY: MIPI CSI-2 serial interface, with C-PHY + * @V4L2_MBUS_INVALID: invalid bus type (keep as last) + */ +enum v4l2_mbus_type { + V4L2_MBUS_UNKNOWN, + V4L2_MBUS_PARALLEL, + V4L2_MBUS_BT656, + V4L2_MBUS_CSI1, + V4L2_MBUS_CCP2, + V4L2_MBUS_CSI2_DPHY, + V4L2_MBUS_CSI2_CPHY, + V4L2_MBUS_INVALID, +}; + +/** + * struct v4l2_mbus_config - media bus configuration + * @type: in: interface type + * @flags: in / out: configuration flags, depending on @type + */ +struct v4l2_mbus_config { + enum v4l2_mbus_type type; + unsigned int flags; +}; + +/** + * v4l2_fill_pix_format - Ancillary routine that fills a &struct + * v4l2_pix_format fields from a &struct v4l2_mbus_framefmt. + * + * @pix_fmt: pointer to &struct v4l2_pix_format to be filled + * @mbus_fmt: pointer to &struct v4l2_mbus_framefmt to be used as model + */ +static inline void +v4l2_fill_pix_format(struct v4l2_pix_format *pix_fmt, + const struct v4l2_mbus_framefmt *mbus_fmt) +{ + pix_fmt->width = mbus_fmt->width; + pix_fmt->height = mbus_fmt->height; + pix_fmt->field = mbus_fmt->field; + pix_fmt->colorspace = mbus_fmt->colorspace; + pix_fmt->ycbcr_enc = mbus_fmt->ycbcr_enc; + pix_fmt->quantization = mbus_fmt->quantization; + pix_fmt->xfer_func = mbus_fmt->xfer_func; +} + +/** + * v4l2_fill_pix_format - Ancillary routine that fills a &struct + * v4l2_mbus_framefmt from a &struct v4l2_pix_format and a + * data format code. + * + * @mbus_fmt: pointer to &struct v4l2_mbus_framefmt to be filled + * @pix_fmt: pointer to &struct v4l2_pix_format to be used as model + * @code: data format code (from &enum v4l2_mbus_pixelcode) + */ +static inline void v4l2_fill_mbus_format(struct v4l2_mbus_framefmt *mbus_fmt, + const struct v4l2_pix_format *pix_fmt, + u32 code) +{ + mbus_fmt->width = pix_fmt->width; + mbus_fmt->height = pix_fmt->height; + mbus_fmt->field = pix_fmt->field; + mbus_fmt->colorspace = pix_fmt->colorspace; + mbus_fmt->ycbcr_enc = pix_fmt->ycbcr_enc; + mbus_fmt->quantization = pix_fmt->quantization; + mbus_fmt->xfer_func = pix_fmt->xfer_func; + mbus_fmt->code = code; +} + +/** + * v4l2_fill_pix_format - Ancillary routine that fills a &struct + * v4l2_pix_format_mplane fields from a media bus structure. + * + * @pix_mp_fmt: pointer to &struct v4l2_pix_format_mplane to be filled + * @mbus_fmt: pointer to &struct v4l2_mbus_framefmt to be used as model + */ +static inline void +v4l2_fill_pix_format_mplane(struct v4l2_pix_format_mplane *pix_mp_fmt, + const struct v4l2_mbus_framefmt *mbus_fmt) +{ + pix_mp_fmt->width = mbus_fmt->width; + pix_mp_fmt->height = mbus_fmt->height; + pix_mp_fmt->field = mbus_fmt->field; + pix_mp_fmt->colorspace = mbus_fmt->colorspace; + pix_mp_fmt->ycbcr_enc = mbus_fmt->ycbcr_enc; + pix_mp_fmt->quantization = mbus_fmt->quantization; + pix_mp_fmt->xfer_func = mbus_fmt->xfer_func; +} + +/** + * v4l2_fill_pix_format - Ancillary routine that fills a &struct + * v4l2_mbus_framefmt from a &struct v4l2_pix_format_mplane. + * + * @mbus_fmt: pointer to &struct v4l2_mbus_framefmt to be filled + * @pix_mp_fmt: pointer to &struct v4l2_pix_format_mplane to be used as model + */ +static inline void +v4l2_fill_mbus_format_mplane(struct v4l2_mbus_framefmt *mbus_fmt, + const struct v4l2_pix_format_mplane *pix_mp_fmt) +{ + mbus_fmt->width = pix_mp_fmt->width; + mbus_fmt->height = pix_mp_fmt->height; + mbus_fmt->field = pix_mp_fmt->field; + mbus_fmt->colorspace = pix_mp_fmt->colorspace; + mbus_fmt->ycbcr_enc = pix_mp_fmt->ycbcr_enc; + mbus_fmt->quantization = pix_mp_fmt->quantization; + mbus_fmt->xfer_func = pix_mp_fmt->xfer_func; +} + +#endif diff --git a/include/media/v4l2-mem2mem.h b/include/media/v4l2-mem2mem.h new file mode 100644 index 000000000..8d52c4506 --- /dev/null +++ b/include/media/v4l2-mem2mem.h @@ -0,0 +1,888 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * Memory-to-memory device framework for Video for Linux 2. + * + * Helper functions for devices that use memory buffers for both source + * and destination. + * + * Copyright (c) 2009 Samsung Electronics Co., Ltd. + * Pawel Osciak, <pawel@osciak.com> + * Marek Szyprowski, <m.szyprowski@samsung.com> + */ + +#ifndef _MEDIA_V4L2_MEM2MEM_H +#define _MEDIA_V4L2_MEM2MEM_H + +#include <media/videobuf2-v4l2.h> + +/** + * struct v4l2_m2m_ops - mem-to-mem device driver callbacks + * @device_run: required. Begin the actual job (transaction) inside this + * callback. + * The job does NOT have to end before this callback returns + * (and it will be the usual case). When the job finishes, + * v4l2_m2m_job_finish() or v4l2_m2m_buf_done_and_job_finish() + * has to be called. + * @job_ready: optional. Should return 0 if the driver does not have a job + * fully prepared to run yet (i.e. it will not be able to finish a + * transaction without sleeping). If not provided, it will be + * assumed that one source and one destination buffer are all + * that is required for the driver to perform one full transaction. + * This method may not sleep. + * @job_abort: optional. Informs the driver that it has to abort the currently + * running transaction as soon as possible (i.e. as soon as it can + * stop the device safely; e.g. in the next interrupt handler), + * even if the transaction would not have been finished by then. + * After the driver performs the necessary steps, it has to call + * v4l2_m2m_job_finish() or v4l2_m2m_buf_done_and_job_finish() as + * if the transaction ended normally. + * This function does not have to (and will usually not) wait + * until the device enters a state when it can be stopped. + */ +struct v4l2_m2m_ops { + void (*device_run)(void *priv); + int (*job_ready)(void *priv); + void (*job_abort)(void *priv); +}; + +struct video_device; +struct v4l2_m2m_dev; + +/** + * struct v4l2_m2m_queue_ctx - represents a queue for buffers ready to be + * processed + * + * @q: pointer to struct &vb2_queue + * @rdy_queue: List of V4L2 mem-to-mem queues + * @rdy_spinlock: spin lock to protect the struct usage + * @num_rdy: number of buffers ready to be processed + * @buffered: is the queue buffered? + * + * Queue for buffers ready to be processed as soon as this + * instance receives access to the device. + */ + +struct v4l2_m2m_queue_ctx { + struct vb2_queue q; + + struct list_head rdy_queue; + spinlock_t rdy_spinlock; + u8 num_rdy; + bool buffered; +}; + +/** + * struct v4l2_m2m_ctx - Memory to memory context structure + * + * @q_lock: struct &mutex lock + * @new_frame: valid in the device_run callback: if true, then this + * starts a new frame; if false, then this is a new slice + * for an existing frame. This is always true unless + * V4L2_BUF_CAP_SUPPORTS_M2M_HOLD_CAPTURE_BUF is set, which + * indicates slicing support. + * @is_draining: indicates device is in draining phase + * @last_src_buf: indicate the last source buffer for draining + * @next_buf_last: next capture queud buffer will be tagged as last + * @has_stopped: indicate the device has been stopped + * @m2m_dev: opaque pointer to the internal data to handle M2M context + * @cap_q_ctx: Capture (output to memory) queue context + * @out_q_ctx: Output (input from memory) queue context + * @queue: List of memory to memory contexts + * @job_flags: Job queue flags, used internally by v4l2-mem2mem.c: + * %TRANS_QUEUED, %TRANS_RUNNING and %TRANS_ABORT. + * @finished: Wait queue used to signalize when a job queue finished. + * @priv: Instance private data + * + * The memory to memory context is specific to a file handle, NOT to e.g. + * a device. + */ +struct v4l2_m2m_ctx { + /* optional cap/out vb2 queues lock */ + struct mutex *q_lock; + + bool new_frame; + + bool is_draining; + struct vb2_v4l2_buffer *last_src_buf; + bool next_buf_last; + bool has_stopped; + + /* internal use only */ + struct v4l2_m2m_dev *m2m_dev; + + struct v4l2_m2m_queue_ctx cap_q_ctx; + + struct v4l2_m2m_queue_ctx out_q_ctx; + + /* For device job queue */ + struct list_head queue; + unsigned long job_flags; + wait_queue_head_t finished; + + void *priv; +}; + +/** + * struct v4l2_m2m_buffer - Memory to memory buffer + * + * @vb: pointer to struct &vb2_v4l2_buffer + * @list: list of m2m buffers + */ +struct v4l2_m2m_buffer { + struct vb2_v4l2_buffer vb; + struct list_head list; +}; + +/** + * v4l2_m2m_get_curr_priv() - return driver private data for the currently + * running instance or NULL if no instance is running + * + * @m2m_dev: opaque pointer to the internal data to handle M2M context + */ +void *v4l2_m2m_get_curr_priv(struct v4l2_m2m_dev *m2m_dev); + +/** + * v4l2_m2m_get_vq() - return vb2_queue for the given type + * + * @m2m_ctx: m2m context assigned to the instance given by struct &v4l2_m2m_ctx + * @type: type of the V4L2 buffer, as defined by enum &v4l2_buf_type + */ +struct vb2_queue *v4l2_m2m_get_vq(struct v4l2_m2m_ctx *m2m_ctx, + enum v4l2_buf_type type); + +/** + * v4l2_m2m_try_schedule() - check whether an instance is ready to be added to + * the pending job queue and add it if so. + * + * @m2m_ctx: m2m context assigned to the instance given by struct &v4l2_m2m_ctx + * + * There are three basic requirements an instance has to meet to be able to run: + * 1) at least one source buffer has to be queued, + * 2) at least one destination buffer has to be queued, + * 3) streaming has to be on. + * + * If a queue is buffered (for example a decoder hardware ringbuffer that has + * to be drained before doing streamoff), allow scheduling without v4l2 buffers + * on that queue. + * + * There may also be additional, custom requirements. In such case the driver + * should supply a custom callback (job_ready in v4l2_m2m_ops) that should + * return 1 if the instance is ready. + * An example of the above could be an instance that requires more than one + * src/dst buffer per transaction. + */ +void v4l2_m2m_try_schedule(struct v4l2_m2m_ctx *m2m_ctx); + +/** + * v4l2_m2m_job_finish() - inform the framework that a job has been finished + * and have it clean up + * + * @m2m_dev: opaque pointer to the internal data to handle M2M context + * @m2m_ctx: m2m context assigned to the instance given by struct &v4l2_m2m_ctx + * + * Called by a driver to yield back the device after it has finished with it. + * Should be called as soon as possible after reaching a state which allows + * other instances to take control of the device. + * + * This function has to be called only after &v4l2_m2m_ops->device_run + * callback has been called on the driver. To prevent recursion, it should + * not be called directly from the &v4l2_m2m_ops->device_run callback though. + */ +void v4l2_m2m_job_finish(struct v4l2_m2m_dev *m2m_dev, + struct v4l2_m2m_ctx *m2m_ctx); + +/** + * v4l2_m2m_buf_done_and_job_finish() - return source/destination buffers with + * state and inform the framework that a job has been finished and have it + * clean up + * + * @m2m_dev: opaque pointer to the internal data to handle M2M context + * @m2m_ctx: m2m context assigned to the instance given by struct &v4l2_m2m_ctx + * @state: vb2 buffer state passed to v4l2_m2m_buf_done(). + * + * Drivers that set V4L2_BUF_CAP_SUPPORTS_M2M_HOLD_CAPTURE_BUF must use this + * function instead of job_finish() to take held buffers into account. It is + * optional for other drivers. + * + * This function removes the source buffer from the ready list and returns + * it with the given state. The same is done for the destination buffer, unless + * it is marked 'held'. In that case the buffer is kept on the ready list. + * + * After that the job is finished (see job_finish()). + * + * This allows for multiple output buffers to be used to fill in a single + * capture buffer. This is typically used by stateless decoders where + * multiple e.g. H.264 slices contribute to a single decoded frame. + */ +void v4l2_m2m_buf_done_and_job_finish(struct v4l2_m2m_dev *m2m_dev, + struct v4l2_m2m_ctx *m2m_ctx, + enum vb2_buffer_state state); + +static inline void +v4l2_m2m_buf_done(struct vb2_v4l2_buffer *buf, enum vb2_buffer_state state) +{ + vb2_buffer_done(&buf->vb2_buf, state); +} + +/** + * v4l2_m2m_clear_state() - clear encoding/decoding state + * + * @m2m_ctx: m2m context assigned to the instance given by struct &v4l2_m2m_ctx + */ +static inline void +v4l2_m2m_clear_state(struct v4l2_m2m_ctx *m2m_ctx) +{ + m2m_ctx->next_buf_last = false; + m2m_ctx->is_draining = false; + m2m_ctx->has_stopped = false; +} + +/** + * v4l2_m2m_mark_stopped() - set current encoding/decoding state as stopped + * + * @m2m_ctx: m2m context assigned to the instance given by struct &v4l2_m2m_ctx + */ +static inline void +v4l2_m2m_mark_stopped(struct v4l2_m2m_ctx *m2m_ctx) +{ + m2m_ctx->next_buf_last = false; + m2m_ctx->is_draining = false; + m2m_ctx->has_stopped = true; +} + +/** + * v4l2_m2m_dst_buf_is_last() - return the current encoding/decoding session + * draining management state of next queued capture buffer + * + * This last capture buffer should be tagged with V4L2_BUF_FLAG_LAST to notify + * the end of the capture session. + * + * @m2m_ctx: m2m context assigned to the instance given by struct &v4l2_m2m_ctx + */ +static inline bool +v4l2_m2m_dst_buf_is_last(struct v4l2_m2m_ctx *m2m_ctx) +{ + return m2m_ctx->is_draining && m2m_ctx->next_buf_last; +} + +/** + * v4l2_m2m_has_stopped() - return the current encoding/decoding session + * stopped state + * + * @m2m_ctx: m2m context assigned to the instance given by struct &v4l2_m2m_ctx + */ +static inline bool +v4l2_m2m_has_stopped(struct v4l2_m2m_ctx *m2m_ctx) +{ + return m2m_ctx->has_stopped; +} + +/** + * v4l2_m2m_is_last_draining_src_buf() - return the output buffer draining + * state in the current encoding/decoding session + * + * This will identify the last output buffer queued before a session stop + * was required, leading to an actual encoding/decoding session stop state + * in the encoding/decoding process after being processed. + * + * @m2m_ctx: m2m context assigned to the instance given by struct &v4l2_m2m_ctx + * @vbuf: pointer to struct &v4l2_buffer + */ +static inline bool +v4l2_m2m_is_last_draining_src_buf(struct v4l2_m2m_ctx *m2m_ctx, + struct vb2_v4l2_buffer *vbuf) +{ + return m2m_ctx->is_draining && vbuf == m2m_ctx->last_src_buf; +} + +/** + * v4l2_m2m_last_buffer_done() - marks the buffer with LAST flag and DONE + * + * @m2m_ctx: m2m context assigned to the instance given by struct &v4l2_m2m_ctx + * @vbuf: pointer to struct &v4l2_buffer + */ +void v4l2_m2m_last_buffer_done(struct v4l2_m2m_ctx *m2m_ctx, + struct vb2_v4l2_buffer *vbuf); + +/** + * v4l2_m2m_suspend() - stop new jobs from being run and wait for current job + * to finish + * + * @m2m_dev: opaque pointer to the internal data to handle M2M context + * + * Called by a driver in the suspend hook. Stop new jobs from being run, and + * wait for current running job to finish. + */ +void v4l2_m2m_suspend(struct v4l2_m2m_dev *m2m_dev); + +/** + * v4l2_m2m_resume() - resume job running and try to run a queued job + * + * @m2m_dev: opaque pointer to the internal data to handle M2M context + * + * Called by a driver in the resume hook. This reverts the operation of + * v4l2_m2m_suspend() and allows job to be run. Also try to run a queued job if + * there is any. + */ +void v4l2_m2m_resume(struct v4l2_m2m_dev *m2m_dev); + +/** + * v4l2_m2m_reqbufs() - multi-queue-aware REQBUFS multiplexer + * + * @file: pointer to struct &file + * @m2m_ctx: m2m context assigned to the instance given by struct &v4l2_m2m_ctx + * @reqbufs: pointer to struct &v4l2_requestbuffers + */ +int v4l2_m2m_reqbufs(struct file *file, struct v4l2_m2m_ctx *m2m_ctx, + struct v4l2_requestbuffers *reqbufs); + +/** + * v4l2_m2m_querybuf() - multi-queue-aware QUERYBUF multiplexer + * + * @file: pointer to struct &file + * @m2m_ctx: m2m context assigned to the instance given by struct &v4l2_m2m_ctx + * @buf: pointer to struct &v4l2_buffer + * + * See v4l2_m2m_mmap() documentation for details. + */ +int v4l2_m2m_querybuf(struct file *file, struct v4l2_m2m_ctx *m2m_ctx, + struct v4l2_buffer *buf); + +/** + * v4l2_m2m_qbuf() - enqueue a source or destination buffer, depending on + * the type + * + * @file: pointer to struct &file + * @m2m_ctx: m2m context assigned to the instance given by struct &v4l2_m2m_ctx + * @buf: pointer to struct &v4l2_buffer + */ +int v4l2_m2m_qbuf(struct file *file, struct v4l2_m2m_ctx *m2m_ctx, + struct v4l2_buffer *buf); + +/** + * v4l2_m2m_dqbuf() - dequeue a source or destination buffer, depending on + * the type + * + * @file: pointer to struct &file + * @m2m_ctx: m2m context assigned to the instance given by struct &v4l2_m2m_ctx + * @buf: pointer to struct &v4l2_buffer + */ +int v4l2_m2m_dqbuf(struct file *file, struct v4l2_m2m_ctx *m2m_ctx, + struct v4l2_buffer *buf); + +/** + * v4l2_m2m_prepare_buf() - prepare a source or destination buffer, depending on + * the type + * + * @file: pointer to struct &file + * @m2m_ctx: m2m context assigned to the instance given by struct &v4l2_m2m_ctx + * @buf: pointer to struct &v4l2_buffer + */ +int v4l2_m2m_prepare_buf(struct file *file, struct v4l2_m2m_ctx *m2m_ctx, + struct v4l2_buffer *buf); + +/** + * v4l2_m2m_create_bufs() - create a source or destination buffer, depending + * on the type + * + * @file: pointer to struct &file + * @m2m_ctx: m2m context assigned to the instance given by struct &v4l2_m2m_ctx + * @create: pointer to struct &v4l2_create_buffers + */ +int v4l2_m2m_create_bufs(struct file *file, struct v4l2_m2m_ctx *m2m_ctx, + struct v4l2_create_buffers *create); + +/** + * v4l2_m2m_expbuf() - export a source or destination buffer, depending on + * the type + * + * @file: pointer to struct &file + * @m2m_ctx: m2m context assigned to the instance given by struct &v4l2_m2m_ctx + * @eb: pointer to struct &v4l2_exportbuffer + */ +int v4l2_m2m_expbuf(struct file *file, struct v4l2_m2m_ctx *m2m_ctx, + struct v4l2_exportbuffer *eb); + +/** + * v4l2_m2m_streamon() - turn on streaming for a video queue + * + * @file: pointer to struct &file + * @m2m_ctx: m2m context assigned to the instance given by struct &v4l2_m2m_ctx + * @type: type of the V4L2 buffer, as defined by enum &v4l2_buf_type + */ +int v4l2_m2m_streamon(struct file *file, struct v4l2_m2m_ctx *m2m_ctx, + enum v4l2_buf_type type); + +/** + * v4l2_m2m_streamoff() - turn off streaming for a video queue + * + * @file: pointer to struct &file + * @m2m_ctx: m2m context assigned to the instance given by struct &v4l2_m2m_ctx + * @type: type of the V4L2 buffer, as defined by enum &v4l2_buf_type + */ +int v4l2_m2m_streamoff(struct file *file, struct v4l2_m2m_ctx *m2m_ctx, + enum v4l2_buf_type type); + +/** + * v4l2_m2m_update_start_streaming_state() - update the encoding/decoding + * session state when a start of streaming of a video queue is requested + * + * @m2m_ctx: m2m context assigned to the instance given by struct &v4l2_m2m_ctx + * @q: queue + */ +void v4l2_m2m_update_start_streaming_state(struct v4l2_m2m_ctx *m2m_ctx, + struct vb2_queue *q); + +/** + * v4l2_m2m_update_stop_streaming_state() - update the encoding/decoding + * session state when a stop of streaming of a video queue is requested + * + * @m2m_ctx: m2m context assigned to the instance given by struct &v4l2_m2m_ctx + * @q: queue + */ +void v4l2_m2m_update_stop_streaming_state(struct v4l2_m2m_ctx *m2m_ctx, + struct vb2_queue *q); + +/** + * v4l2_m2m_encoder_cmd() - execute an encoder command + * + * @file: pointer to struct &file + * @m2m_ctx: m2m context assigned to the instance given by struct &v4l2_m2m_ctx + * @ec: pointer to the encoder command + */ +int v4l2_m2m_encoder_cmd(struct file *file, struct v4l2_m2m_ctx *m2m_ctx, + struct v4l2_encoder_cmd *ec); + +/** + * v4l2_m2m_decoder_cmd() - execute a decoder command + * + * @file: pointer to struct &file + * @m2m_ctx: m2m context assigned to the instance given by struct &v4l2_m2m_ctx + * @dc: pointer to the decoder command + */ +int v4l2_m2m_decoder_cmd(struct file *file, struct v4l2_m2m_ctx *m2m_ctx, + struct v4l2_decoder_cmd *dc); + +/** + * v4l2_m2m_poll() - poll replacement, for destination buffers only + * + * @file: pointer to struct &file + * @m2m_ctx: m2m context assigned to the instance given by struct &v4l2_m2m_ctx + * @wait: pointer to struct &poll_table_struct + * + * Call from the driver's poll() function. Will poll both queues. If a buffer + * is available to dequeue (with dqbuf) from the source queue, this will + * indicate that a non-blocking write can be performed, while read will be + * returned in case of the destination queue. + */ +__poll_t v4l2_m2m_poll(struct file *file, struct v4l2_m2m_ctx *m2m_ctx, + struct poll_table_struct *wait); + +/** + * v4l2_m2m_mmap() - source and destination queues-aware mmap multiplexer + * + * @file: pointer to struct &file + * @m2m_ctx: m2m context assigned to the instance given by struct &v4l2_m2m_ctx + * @vma: pointer to struct &vm_area_struct + * + * Call from driver's mmap() function. Will handle mmap() for both queues + * seamlessly for videobuffer, which will receive normal per-queue offsets and + * proper videobuf queue pointers. The differentiation is made outside videobuf + * by adding a predefined offset to buffers from one of the queues and + * subtracting it before passing it back to videobuf. Only drivers (and + * thus applications) receive modified offsets. + */ +int v4l2_m2m_mmap(struct file *file, struct v4l2_m2m_ctx *m2m_ctx, + struct vm_area_struct *vma); + +/** + * v4l2_m2m_init() - initialize per-driver m2m data + * + * @m2m_ops: pointer to struct v4l2_m2m_ops + * + * Usually called from driver's ``probe()`` function. + * + * Return: returns an opaque pointer to the internal data to handle M2M context + */ +struct v4l2_m2m_dev *v4l2_m2m_init(const struct v4l2_m2m_ops *m2m_ops); + +#if defined(CONFIG_MEDIA_CONTROLLER) +void v4l2_m2m_unregister_media_controller(struct v4l2_m2m_dev *m2m_dev); +int v4l2_m2m_register_media_controller(struct v4l2_m2m_dev *m2m_dev, + struct video_device *vdev, int function); +#else +static inline void +v4l2_m2m_unregister_media_controller(struct v4l2_m2m_dev *m2m_dev) +{ +} + +static inline int +v4l2_m2m_register_media_controller(struct v4l2_m2m_dev *m2m_dev, + struct video_device *vdev, int function) +{ + return 0; +} +#endif + +/** + * v4l2_m2m_release() - cleans up and frees a m2m_dev structure + * + * @m2m_dev: opaque pointer to the internal data to handle M2M context + * + * Usually called from driver's ``remove()`` function. + */ +void v4l2_m2m_release(struct v4l2_m2m_dev *m2m_dev); + +/** + * v4l2_m2m_ctx_init() - allocate and initialize a m2m context + * + * @m2m_dev: opaque pointer to the internal data to handle M2M context + * @drv_priv: driver's instance private data + * @queue_init: a callback for queue type-specific initialization function + * to be used for initializing videobuf_queues + * + * Usually called from driver's ``open()`` function. + */ +struct v4l2_m2m_ctx *v4l2_m2m_ctx_init(struct v4l2_m2m_dev *m2m_dev, + void *drv_priv, + int (*queue_init)(void *priv, struct vb2_queue *src_vq, struct vb2_queue *dst_vq)); + +static inline void v4l2_m2m_set_src_buffered(struct v4l2_m2m_ctx *m2m_ctx, + bool buffered) +{ + m2m_ctx->out_q_ctx.buffered = buffered; +} + +static inline void v4l2_m2m_set_dst_buffered(struct v4l2_m2m_ctx *m2m_ctx, + bool buffered) +{ + m2m_ctx->cap_q_ctx.buffered = buffered; +} + +/** + * v4l2_m2m_ctx_release() - release m2m context + * + * @m2m_ctx: m2m context assigned to the instance given by struct &v4l2_m2m_ctx + * + * Usually called from driver's release() function. + */ +void v4l2_m2m_ctx_release(struct v4l2_m2m_ctx *m2m_ctx); + +/** + * v4l2_m2m_buf_queue() - add a buffer to the proper ready buffers list. + * + * @m2m_ctx: m2m context assigned to the instance given by struct &v4l2_m2m_ctx + * @vbuf: pointer to struct &vb2_v4l2_buffer + * + * Call from videobuf_queue_ops->ops->buf_queue, videobuf_queue_ops callback. + */ +void v4l2_m2m_buf_queue(struct v4l2_m2m_ctx *m2m_ctx, + struct vb2_v4l2_buffer *vbuf); + +/** + * v4l2_m2m_num_src_bufs_ready() - return the number of source buffers ready for + * use + * + * @m2m_ctx: m2m context assigned to the instance given by struct &v4l2_m2m_ctx + */ +static inline +unsigned int v4l2_m2m_num_src_bufs_ready(struct v4l2_m2m_ctx *m2m_ctx) +{ + unsigned int num_buf_rdy; + unsigned long flags; + + spin_lock_irqsave(&m2m_ctx->out_q_ctx.rdy_spinlock, flags); + num_buf_rdy = m2m_ctx->out_q_ctx.num_rdy; + spin_unlock_irqrestore(&m2m_ctx->out_q_ctx.rdy_spinlock, flags); + + return num_buf_rdy; +} + +/** + * v4l2_m2m_num_dst_bufs_ready() - return the number of destination buffers + * ready for use + * + * @m2m_ctx: m2m context assigned to the instance given by struct &v4l2_m2m_ctx + */ +static inline +unsigned int v4l2_m2m_num_dst_bufs_ready(struct v4l2_m2m_ctx *m2m_ctx) +{ + unsigned int num_buf_rdy; + unsigned long flags; + + spin_lock_irqsave(&m2m_ctx->cap_q_ctx.rdy_spinlock, flags); + num_buf_rdy = m2m_ctx->cap_q_ctx.num_rdy; + spin_unlock_irqrestore(&m2m_ctx->cap_q_ctx.rdy_spinlock, flags); + + return num_buf_rdy; +} + +/** + * v4l2_m2m_next_buf() - return next buffer from the list of ready buffers + * + * @q_ctx: pointer to struct @v4l2_m2m_queue_ctx + */ +struct vb2_v4l2_buffer *v4l2_m2m_next_buf(struct v4l2_m2m_queue_ctx *q_ctx); + +/** + * v4l2_m2m_next_src_buf() - return next source buffer from the list of ready + * buffers + * + * @m2m_ctx: m2m context assigned to the instance given by struct &v4l2_m2m_ctx + */ +static inline struct vb2_v4l2_buffer * +v4l2_m2m_next_src_buf(struct v4l2_m2m_ctx *m2m_ctx) +{ + return v4l2_m2m_next_buf(&m2m_ctx->out_q_ctx); +} + +/** + * v4l2_m2m_next_dst_buf() - return next destination buffer from the list of + * ready buffers + * + * @m2m_ctx: m2m context assigned to the instance given by struct &v4l2_m2m_ctx + */ +static inline struct vb2_v4l2_buffer * +v4l2_m2m_next_dst_buf(struct v4l2_m2m_ctx *m2m_ctx) +{ + return v4l2_m2m_next_buf(&m2m_ctx->cap_q_ctx); +} + +/** + * v4l2_m2m_last_buf() - return last buffer from the list of ready buffers + * + * @q_ctx: pointer to struct @v4l2_m2m_queue_ctx + */ +struct vb2_v4l2_buffer *v4l2_m2m_last_buf(struct v4l2_m2m_queue_ctx *q_ctx); + +/** + * v4l2_m2m_last_src_buf() - return last destination buffer from the list of + * ready buffers + * + * @m2m_ctx: m2m context assigned to the instance given by struct &v4l2_m2m_ctx + */ +static inline struct vb2_v4l2_buffer * +v4l2_m2m_last_src_buf(struct v4l2_m2m_ctx *m2m_ctx) +{ + return v4l2_m2m_last_buf(&m2m_ctx->out_q_ctx); +} + +/** + * v4l2_m2m_last_dst_buf() - return last destination buffer from the list of + * ready buffers + * + * @m2m_ctx: m2m context assigned to the instance given by struct &v4l2_m2m_ctx + */ +static inline struct vb2_v4l2_buffer * +v4l2_m2m_last_dst_buf(struct v4l2_m2m_ctx *m2m_ctx) +{ + return v4l2_m2m_last_buf(&m2m_ctx->cap_q_ctx); +} + +/** + * v4l2_m2m_for_each_dst_buf() - iterate over a list of destination ready + * buffers + * + * @m2m_ctx: m2m context assigned to the instance given by struct &v4l2_m2m_ctx + * @b: current buffer of type struct v4l2_m2m_buffer + */ +#define v4l2_m2m_for_each_dst_buf(m2m_ctx, b) \ + list_for_each_entry(b, &m2m_ctx->cap_q_ctx.rdy_queue, list) + +/** + * v4l2_m2m_for_each_src_buf() - iterate over a list of source ready buffers + * + * @m2m_ctx: m2m context assigned to the instance given by struct &v4l2_m2m_ctx + * @b: current buffer of type struct v4l2_m2m_buffer + */ +#define v4l2_m2m_for_each_src_buf(m2m_ctx, b) \ + list_for_each_entry(b, &m2m_ctx->out_q_ctx.rdy_queue, list) + +/** + * v4l2_m2m_for_each_dst_buf_safe() - iterate over a list of destination ready + * buffers safely + * + * @m2m_ctx: m2m context assigned to the instance given by struct &v4l2_m2m_ctx + * @b: current buffer of type struct v4l2_m2m_buffer + * @n: used as temporary storage + */ +#define v4l2_m2m_for_each_dst_buf_safe(m2m_ctx, b, n) \ + list_for_each_entry_safe(b, n, &m2m_ctx->cap_q_ctx.rdy_queue, list) + +/** + * v4l2_m2m_for_each_src_buf_safe() - iterate over a list of source ready + * buffers safely + * + * @m2m_ctx: m2m context assigned to the instance given by struct &v4l2_m2m_ctx + * @b: current buffer of type struct v4l2_m2m_buffer + * @n: used as temporary storage + */ +#define v4l2_m2m_for_each_src_buf_safe(m2m_ctx, b, n) \ + list_for_each_entry_safe(b, n, &m2m_ctx->out_q_ctx.rdy_queue, list) + +/** + * v4l2_m2m_get_src_vq() - return vb2_queue for source buffers + * + * @m2m_ctx: m2m context assigned to the instance given by struct &v4l2_m2m_ctx + */ +static inline +struct vb2_queue *v4l2_m2m_get_src_vq(struct v4l2_m2m_ctx *m2m_ctx) +{ + return &m2m_ctx->out_q_ctx.q; +} + +/** + * v4l2_m2m_get_dst_vq() - return vb2_queue for destination buffers + * + * @m2m_ctx: m2m context assigned to the instance given by struct &v4l2_m2m_ctx + */ +static inline +struct vb2_queue *v4l2_m2m_get_dst_vq(struct v4l2_m2m_ctx *m2m_ctx) +{ + return &m2m_ctx->cap_q_ctx.q; +} + +/** + * v4l2_m2m_buf_remove() - take off a buffer from the list of ready buffers and + * return it + * + * @q_ctx: pointer to struct @v4l2_m2m_queue_ctx + */ +struct vb2_v4l2_buffer *v4l2_m2m_buf_remove(struct v4l2_m2m_queue_ctx *q_ctx); + +/** + * v4l2_m2m_src_buf_remove() - take off a source buffer from the list of ready + * buffers and return it + * + * @m2m_ctx: m2m context assigned to the instance given by struct &v4l2_m2m_ctx + */ +static inline struct vb2_v4l2_buffer * +v4l2_m2m_src_buf_remove(struct v4l2_m2m_ctx *m2m_ctx) +{ + return v4l2_m2m_buf_remove(&m2m_ctx->out_q_ctx); +} + +/** + * v4l2_m2m_dst_buf_remove() - take off a destination buffer from the list of + * ready buffers and return it + * + * @m2m_ctx: m2m context assigned to the instance given by struct &v4l2_m2m_ctx + */ +static inline struct vb2_v4l2_buffer * +v4l2_m2m_dst_buf_remove(struct v4l2_m2m_ctx *m2m_ctx) +{ + return v4l2_m2m_buf_remove(&m2m_ctx->cap_q_ctx); +} + +/** + * v4l2_m2m_buf_remove_by_buf() - take off exact buffer from the list of ready + * buffers + * + * @q_ctx: pointer to struct @v4l2_m2m_queue_ctx + * @vbuf: the buffer to be removed + */ +void v4l2_m2m_buf_remove_by_buf(struct v4l2_m2m_queue_ctx *q_ctx, + struct vb2_v4l2_buffer *vbuf); + +/** + * v4l2_m2m_src_buf_remove_by_buf() - take off exact source buffer from the list + * of ready buffers + * + * @m2m_ctx: m2m context assigned to the instance given by struct &v4l2_m2m_ctx + * @vbuf: the buffer to be removed + */ +static inline void v4l2_m2m_src_buf_remove_by_buf(struct v4l2_m2m_ctx *m2m_ctx, + struct vb2_v4l2_buffer *vbuf) +{ + v4l2_m2m_buf_remove_by_buf(&m2m_ctx->out_q_ctx, vbuf); +} + +/** + * v4l2_m2m_dst_buf_remove_by_buf() - take off exact destination buffer from the + * list of ready buffers + * + * @m2m_ctx: m2m context assigned to the instance given by struct &v4l2_m2m_ctx + * @vbuf: the buffer to be removed + */ +static inline void v4l2_m2m_dst_buf_remove_by_buf(struct v4l2_m2m_ctx *m2m_ctx, + struct vb2_v4l2_buffer *vbuf) +{ + v4l2_m2m_buf_remove_by_buf(&m2m_ctx->cap_q_ctx, vbuf); +} + +struct vb2_v4l2_buffer * +v4l2_m2m_buf_remove_by_idx(struct v4l2_m2m_queue_ctx *q_ctx, unsigned int idx); + +static inline struct vb2_v4l2_buffer * +v4l2_m2m_src_buf_remove_by_idx(struct v4l2_m2m_ctx *m2m_ctx, unsigned int idx) +{ + return v4l2_m2m_buf_remove_by_idx(&m2m_ctx->out_q_ctx, idx); +} + +static inline struct vb2_v4l2_buffer * +v4l2_m2m_dst_buf_remove_by_idx(struct v4l2_m2m_ctx *m2m_ctx, unsigned int idx) +{ + return v4l2_m2m_buf_remove_by_idx(&m2m_ctx->cap_q_ctx, idx); +} + +/** + * v4l2_m2m_buf_copy_metadata() - copy buffer metadata from + * the output buffer to the capture buffer + * + * @out_vb: the output buffer that is the source of the metadata. + * @cap_vb: the capture buffer that will receive the metadata. + * @copy_frame_flags: copy the KEY/B/PFRAME flags as well. + * + * This helper function copies the timestamp, timecode (if the TIMECODE + * buffer flag was set), field and the TIMECODE, KEYFRAME, BFRAME, PFRAME + * and TSTAMP_SRC_MASK flags from @out_vb to @cap_vb. + * + * If @copy_frame_flags is false, then the KEYFRAME, BFRAME and PFRAME + * flags are not copied. This is typically needed for encoders that + * set this bits explicitly. + */ +void v4l2_m2m_buf_copy_metadata(const struct vb2_v4l2_buffer *out_vb, + struct vb2_v4l2_buffer *cap_vb, + bool copy_frame_flags); + +/* v4l2 request helper */ + +void v4l2_m2m_request_queue(struct media_request *req); + +/* v4l2 ioctl helpers */ + +int v4l2_m2m_ioctl_reqbufs(struct file *file, void *priv, + struct v4l2_requestbuffers *rb); +int v4l2_m2m_ioctl_create_bufs(struct file *file, void *fh, + struct v4l2_create_buffers *create); +int v4l2_m2m_ioctl_querybuf(struct file *file, void *fh, + struct v4l2_buffer *buf); +int v4l2_m2m_ioctl_expbuf(struct file *file, void *fh, + struct v4l2_exportbuffer *eb); +int v4l2_m2m_ioctl_qbuf(struct file *file, void *fh, + struct v4l2_buffer *buf); +int v4l2_m2m_ioctl_dqbuf(struct file *file, void *fh, + struct v4l2_buffer *buf); +int v4l2_m2m_ioctl_prepare_buf(struct file *file, void *fh, + struct v4l2_buffer *buf); +int v4l2_m2m_ioctl_streamon(struct file *file, void *fh, + enum v4l2_buf_type type); +int v4l2_m2m_ioctl_streamoff(struct file *file, void *fh, + enum v4l2_buf_type type); +int v4l2_m2m_ioctl_encoder_cmd(struct file *file, void *fh, + struct v4l2_encoder_cmd *ec); +int v4l2_m2m_ioctl_decoder_cmd(struct file *file, void *fh, + struct v4l2_decoder_cmd *dc); +int v4l2_m2m_ioctl_try_encoder_cmd(struct file *file, void *fh, + struct v4l2_encoder_cmd *ec); +int v4l2_m2m_ioctl_try_decoder_cmd(struct file *file, void *fh, + struct v4l2_decoder_cmd *dc); +int v4l2_m2m_ioctl_stateless_try_decoder_cmd(struct file *file, void *fh, + struct v4l2_decoder_cmd *dc); +int v4l2_m2m_ioctl_stateless_decoder_cmd(struct file *file, void *priv, + struct v4l2_decoder_cmd *dc); +int v4l2_m2m_fop_mmap(struct file *file, struct vm_area_struct *vma); +__poll_t v4l2_m2m_fop_poll(struct file *file, poll_table *wait); + +#endif /* _MEDIA_V4L2_MEM2MEM_H */ + diff --git a/include/media/v4l2-rect.h b/include/media/v4l2-rect.h new file mode 100644 index 000000000..bd587d0c0 --- /dev/null +++ b/include/media/v4l2-rect.h @@ -0,0 +1,207 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * v4l2-rect.h - v4l2_rect helper functions + * + * Copyright 2014 Cisco Systems, Inc. and/or its affiliates. All rights reserved. + */ + +#ifndef _V4L2_RECT_H_ +#define _V4L2_RECT_H_ + +#include <linux/videodev2.h> + +/** + * v4l2_rect_set_size_to() - copy the width/height values. + * @r: rect whose width and height fields will be set + * @size: rect containing the width and height fields you need. + */ +static inline void v4l2_rect_set_size_to(struct v4l2_rect *r, + const struct v4l2_rect *size) +{ + r->width = size->width; + r->height = size->height; +} + +/** + * v4l2_rect_set_min_size() - width and height of r should be >= min_size. + * @r: rect whose width and height will be modified + * @min_size: rect containing the minimal width and height + */ +static inline void v4l2_rect_set_min_size(struct v4l2_rect *r, + const struct v4l2_rect *min_size) +{ + if (r->width < min_size->width) + r->width = min_size->width; + if (r->height < min_size->height) + r->height = min_size->height; +} + +/** + * v4l2_rect_set_max_size() - width and height of r should be <= max_size + * @r: rect whose width and height will be modified + * @max_size: rect containing the maximum width and height + */ +static inline void v4l2_rect_set_max_size(struct v4l2_rect *r, + const struct v4l2_rect *max_size) +{ + if (r->width > max_size->width) + r->width = max_size->width; + if (r->height > max_size->height) + r->height = max_size->height; +} + +/** + * v4l2_rect_map_inside()- r should be inside boundary. + * @r: rect that will be modified + * @boundary: rect containing the boundary for @r + */ +static inline void v4l2_rect_map_inside(struct v4l2_rect *r, + const struct v4l2_rect *boundary) +{ + v4l2_rect_set_max_size(r, boundary); + if (r->left < boundary->left) + r->left = boundary->left; + if (r->top < boundary->top) + r->top = boundary->top; + if (r->left + r->width > boundary->left + boundary->width) + r->left = boundary->left + boundary->width - r->width; + if (r->top + r->height > boundary->top + boundary->height) + r->top = boundary->top + boundary->height - r->height; +} + +/** + * v4l2_rect_same_size() - return true if r1 has the same size as r2 + * @r1: rectangle. + * @r2: rectangle. + * + * Return true if both rectangles have the same size. + */ +static inline bool v4l2_rect_same_size(const struct v4l2_rect *r1, + const struct v4l2_rect *r2) +{ + return r1->width == r2->width && r1->height == r2->height; +} + +/** + * v4l2_rect_same_position() - return true if r1 has the same position as r2 + * @r1: rectangle. + * @r2: rectangle. + * + * Return true if both rectangles have the same position + */ +static inline bool v4l2_rect_same_position(const struct v4l2_rect *r1, + const struct v4l2_rect *r2) +{ + return r1->top == r2->top && r1->left == r2->left; +} + +/** + * v4l2_rect_equal() - return true if r1 equals r2 + * @r1: rectangle. + * @r2: rectangle. + * + * Return true if both rectangles have the same size and position. + */ +static inline bool v4l2_rect_equal(const struct v4l2_rect *r1, + const struct v4l2_rect *r2) +{ + return v4l2_rect_same_size(r1, r2) && v4l2_rect_same_position(r1, r2); +} + +/** + * v4l2_rect_intersect() - calculate the intersection of two rects. + * @r: intersection of @r1 and @r2. + * @r1: rectangle. + * @r2: rectangle. + */ +static inline void v4l2_rect_intersect(struct v4l2_rect *r, + const struct v4l2_rect *r1, + const struct v4l2_rect *r2) +{ + int right, bottom; + + r->top = max(r1->top, r2->top); + r->left = max(r1->left, r2->left); + bottom = min(r1->top + r1->height, r2->top + r2->height); + right = min(r1->left + r1->width, r2->left + r2->width); + r->height = max(0, bottom - r->top); + r->width = max(0, right - r->left); +} + +/** + * v4l2_rect_scale() - scale rect r by to/from + * @r: rect to be scaled. + * @from: from rectangle. + * @to: to rectangle. + * + * This scales rectangle @r horizontally by @to->width / @from->width and + * vertically by @to->height / @from->height. + * + * Typically @r is a rectangle inside @from and you want the rectangle as + * it would appear after scaling @from to @to. So the resulting @r will + * be the scaled rectangle inside @to. + */ +static inline void v4l2_rect_scale(struct v4l2_rect *r, + const struct v4l2_rect *from, + const struct v4l2_rect *to) +{ + if (from->width == 0 || from->height == 0) { + r->left = r->top = r->width = r->height = 0; + return; + } + r->left = (((r->left - from->left) * to->width) / from->width) & ~1; + r->width = ((r->width * to->width) / from->width) & ~1; + r->top = ((r->top - from->top) * to->height) / from->height; + r->height = (r->height * to->height) / from->height; +} + +/** + * v4l2_rect_overlap() - do r1 and r2 overlap? + * @r1: rectangle. + * @r2: rectangle. + * + * Returns true if @r1 and @r2 overlap. + */ +static inline bool v4l2_rect_overlap(const struct v4l2_rect *r1, + const struct v4l2_rect *r2) +{ + /* + * IF the left side of r1 is to the right of the right side of r2 OR + * the left side of r2 is to the right of the right side of r1 THEN + * they do not overlap. + */ + if (r1->left >= r2->left + r2->width || + r2->left >= r1->left + r1->width) + return false; + /* + * IF the top side of r1 is below the bottom of r2 OR + * the top side of r2 is below the bottom of r1 THEN + * they do not overlap. + */ + if (r1->top >= r2->top + r2->height || + r2->top >= r1->top + r1->height) + return false; + return true; +} + +/** + * v4l2_rect_enclosed() - is r1 enclosed in r2? + * @r1: rectangle. + * @r2: rectangle. + * + * Returns true if @r1 is enclosed in @r2. + */ +static inline bool v4l2_rect_enclosed(struct v4l2_rect *r1, + struct v4l2_rect *r2) +{ + if (r1->left < r2->left || r1->top < r2->top) + return false; + if (r1->left + r1->width > r2->left + r2->width) + return false; + if (r1->top + r1->height > r2->top + r2->height) + return false; + + return true; +} + +#endif diff --git a/include/media/v4l2-subdev.h b/include/media/v4l2-subdev.h new file mode 100644 index 000000000..73150520c --- /dev/null +++ b/include/media/v4l2-subdev.h @@ -0,0 +1,1181 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * V4L2 sub-device support header. + * + * Copyright (C) 2008 Hans Verkuil <hverkuil@xs4all.nl> + */ + +#ifndef _V4L2_SUBDEV_H +#define _V4L2_SUBDEV_H + +#include <linux/types.h> +#include <linux/v4l2-subdev.h> +#include <media/media-entity.h> +#include <media/v4l2-async.h> +#include <media/v4l2-common.h> +#include <media/v4l2-dev.h> +#include <media/v4l2-fh.h> +#include <media/v4l2-mediabus.h> + +/* generic v4l2_device notify callback notification values */ +#define V4L2_SUBDEV_IR_RX_NOTIFY _IOW('v', 0, u32) +#define V4L2_SUBDEV_IR_RX_FIFO_SERVICE_REQ 0x00000001 +#define V4L2_SUBDEV_IR_RX_END_OF_RX_DETECTED 0x00000002 +#define V4L2_SUBDEV_IR_RX_HW_FIFO_OVERRUN 0x00000004 +#define V4L2_SUBDEV_IR_RX_SW_FIFO_OVERRUN 0x00000008 + +#define V4L2_SUBDEV_IR_TX_NOTIFY _IOW('v', 1, u32) +#define V4L2_SUBDEV_IR_TX_FIFO_SERVICE_REQ 0x00000001 + +#define V4L2_DEVICE_NOTIFY_EVENT _IOW('v', 2, struct v4l2_event) + +struct v4l2_device; +struct v4l2_ctrl_handler; +struct v4l2_event; +struct v4l2_event_subscription; +struct v4l2_fh; +struct v4l2_subdev; +struct v4l2_subdev_fh; +struct tuner_setup; +struct v4l2_mbus_frame_desc; + +/** + * struct v4l2_decode_vbi_line - used to decode_vbi_line + * + * @is_second_field: Set to 0 for the first (odd) field; + * set to 1 for the second (even) field. + * @p: Pointer to the sliced VBI data from the decoder. On exit, points to + * the start of the payload. + * @line: Line number of the sliced VBI data (1-23) + * @type: VBI service type (V4L2_SLICED_*). 0 if no service found + */ +struct v4l2_decode_vbi_line { + u32 is_second_field; + u8 *p; + u32 line; + u32 type; +}; + +/* + * Sub-devices are devices that are connected somehow to the main bridge + * device. These devices are usually audio/video muxers/encoders/decoders or + * sensors and webcam controllers. + * + * Usually these devices are controlled through an i2c bus, but other buses + * may also be used. + * + * The v4l2_subdev struct provides a way of accessing these devices in a + * generic manner. Most operations that these sub-devices support fall in + * a few categories: core ops, audio ops, video ops and tuner ops. + * + * More categories can be added if needed, although this should remain a + * limited set (no more than approx. 8 categories). + * + * Each category has its own set of ops that subdev drivers can implement. + * + * A subdev driver can leave the pointer to the category ops NULL if + * it does not implement them (e.g. an audio subdev will generally not + * implement the video category ops). The exception is the core category: + * this must always be present. + * + * These ops are all used internally so it is no problem to change, remove + * or add ops or move ops from one to another category. Currently these + * ops are based on the original ioctls, but since ops are not limited to + * one argument there is room for improvement here once all i2c subdev + * drivers are converted to use these ops. + */ + +/* + * Core ops: it is highly recommended to implement at least these ops: + * + * log_status + * g_register + * s_register + * + * This provides basic debugging support. + * + * The ioctl ops is meant for generic ioctl-like commands. Depending on + * the use-case it might be better to use subdev-specific ops (currently + * not yet implemented) since ops provide proper type-checking. + */ + +/** + * enum v4l2_subdev_io_pin_bits - Subdevice external IO pin configuration + * bits + * + * @V4L2_SUBDEV_IO_PIN_DISABLE: disables a pin config. ENABLE assumed. + * @V4L2_SUBDEV_IO_PIN_OUTPUT: set it if pin is an output. + * @V4L2_SUBDEV_IO_PIN_INPUT: set it if pin is an input. + * @V4L2_SUBDEV_IO_PIN_SET_VALUE: to set the output value via + * &struct v4l2_subdev_io_pin_config->value. + * @V4L2_SUBDEV_IO_PIN_ACTIVE_LOW: pin active is bit 0. + * Otherwise, ACTIVE HIGH is assumed. + */ +enum v4l2_subdev_io_pin_bits { + V4L2_SUBDEV_IO_PIN_DISABLE = 0, + V4L2_SUBDEV_IO_PIN_OUTPUT = 1, + V4L2_SUBDEV_IO_PIN_INPUT = 2, + V4L2_SUBDEV_IO_PIN_SET_VALUE = 3, + V4L2_SUBDEV_IO_PIN_ACTIVE_LOW = 4, +}; + +/** + * struct v4l2_subdev_io_pin_config - Subdevice external IO pin configuration + * + * @flags: bitmask with flags for this pin's config, whose bits are defined by + * &enum v4l2_subdev_io_pin_bits. + * @pin: Chip external IO pin to configure + * @function: Internal signal pad/function to route to IO pin + * @value: Initial value for pin - e.g. GPIO output value + * @strength: Pin drive strength + */ +struct v4l2_subdev_io_pin_config { + u32 flags; + u8 pin; + u8 function; + u8 value; + u8 strength; +}; + +/** + * struct v4l2_subdev_core_ops - Define core ops callbacks for subdevs + * + * @log_status: callback for VIDIOC_LOG_STATUS() ioctl handler code. + * + * @s_io_pin_config: configure one or more chip I/O pins for chips that + * multiplex different internal signal pads out to IO pins. This function + * takes a pointer to an array of 'n' pin configuration entries, one for + * each pin being configured. This function could be called at times + * other than just subdevice initialization. + * + * @init: initialize the sensor registers to some sort of reasonable default + * values. Do not use for new drivers and should be removed in existing + * drivers. + * + * @load_fw: load firmware. + * + * @reset: generic reset command. The argument selects which subsystems to + * reset. Passing 0 will always reset the whole chip. Do not use for new + * drivers without discussing this first on the linux-media mailinglist. + * There should be no reason normally to reset a device. + * + * @s_gpio: set GPIO pins. Very simple right now, might need to be extended with + * a direction argument if needed. + * + * @command: called by in-kernel drivers in order to call functions internal + * to subdev drivers driver that have a separate callback. + * + * @ioctl: called at the end of ioctl() syscall handler at the V4L2 core. + * used to provide support for private ioctls used on the driver. + * + * @compat_ioctl32: called when a 32 bits application uses a 64 bits Kernel, + * in order to fix data passed from/to userspace. + * + * @g_register: callback for VIDIOC_DBG_G_REGISTER() ioctl handler code. + * + * @s_register: callback for VIDIOC_DBG_S_REGISTER() ioctl handler code. + * + * @s_power: puts subdevice in power saving mode (on == 0) or normal operation + * mode (on == 1). + * + * @interrupt_service_routine: Called by the bridge chip's interrupt service + * handler, when an interrupt status has be raised due to this subdev, + * so that this subdev can handle the details. It may schedule work to be + * performed later. It must not sleep. **Called from an IRQ context**. + * + * @subscribe_event: used by the drivers to request the control framework that + * for it to be warned when the value of a control changes. + * + * @unsubscribe_event: remove event subscription from the control framework. + */ +struct v4l2_subdev_core_ops { + int (*log_status)(struct v4l2_subdev *sd); + int (*s_io_pin_config)(struct v4l2_subdev *sd, size_t n, + struct v4l2_subdev_io_pin_config *pincfg); + int (*init)(struct v4l2_subdev *sd, u32 val); + int (*load_fw)(struct v4l2_subdev *sd); + int (*reset)(struct v4l2_subdev *sd, u32 val); + int (*s_gpio)(struct v4l2_subdev *sd, u32 val); + long (*command)(struct v4l2_subdev *sd, unsigned int cmd, void *arg); + long (*ioctl)(struct v4l2_subdev *sd, unsigned int cmd, void *arg); +#ifdef CONFIG_COMPAT + long (*compat_ioctl32)(struct v4l2_subdev *sd, unsigned int cmd, + unsigned long arg); +#endif +#ifdef CONFIG_VIDEO_ADV_DEBUG + int (*g_register)(struct v4l2_subdev *sd, struct v4l2_dbg_register *reg); + int (*s_register)(struct v4l2_subdev *sd, const struct v4l2_dbg_register *reg); +#endif + int (*s_power)(struct v4l2_subdev *sd, int on); + int (*interrupt_service_routine)(struct v4l2_subdev *sd, + u32 status, bool *handled); + int (*subscribe_event)(struct v4l2_subdev *sd, struct v4l2_fh *fh, + struct v4l2_event_subscription *sub); + int (*unsubscribe_event)(struct v4l2_subdev *sd, struct v4l2_fh *fh, + struct v4l2_event_subscription *sub); +}; + +/** + * struct v4l2_subdev_tuner_ops - Callbacks used when v4l device was opened + * in radio mode. + * + * @standby: puts the tuner in standby mode. It will be woken up + * automatically the next time it is used. + * + * @s_radio: callback that switches the tuner to radio mode. + * drivers should explicitly call it when a tuner ops should + * operate on radio mode, before being able to handle it. + * Used on devices that have both AM/FM radio receiver and TV. + * + * @s_frequency: callback for VIDIOC_S_FREQUENCY() ioctl handler code. + * + * @g_frequency: callback for VIDIOC_G_FREQUENCY() ioctl handler code. + * freq->type must be filled in. Normally done by video_ioctl2() + * or the bridge driver. + * + * @enum_freq_bands: callback for VIDIOC_ENUM_FREQ_BANDS() ioctl handler code. + * + * @g_tuner: callback for VIDIOC_G_TUNER() ioctl handler code. + * + * @s_tuner: callback for VIDIOC_S_TUNER() ioctl handler code. @vt->type must be + * filled in. Normally done by video_ioctl2 or the + * bridge driver. + * + * @g_modulator: callback for VIDIOC_G_MODULATOR() ioctl handler code. + * + * @s_modulator: callback for VIDIOC_S_MODULATOR() ioctl handler code. + * + * @s_type_addr: sets tuner type and its I2C addr. + * + * @s_config: sets tda9887 specific stuff, like port1, port2 and qss + * + * .. note:: + * + * On devices that have both AM/FM and TV, it is up to the driver + * to explicitly call s_radio when the tuner should be switched to + * radio mode, before handling other &struct v4l2_subdev_tuner_ops + * that would require it. An example of such usage is:: + * + * static void s_frequency(void *priv, const struct v4l2_frequency *f) + * { + * ... + * if (f.type == V4L2_TUNER_RADIO) + * v4l2_device_call_all(v4l2_dev, 0, tuner, s_radio); + * ... + * v4l2_device_call_all(v4l2_dev, 0, tuner, s_frequency); + * } + */ +struct v4l2_subdev_tuner_ops { + int (*standby)(struct v4l2_subdev *sd); + int (*s_radio)(struct v4l2_subdev *sd); + int (*s_frequency)(struct v4l2_subdev *sd, const struct v4l2_frequency *freq); + int (*g_frequency)(struct v4l2_subdev *sd, struct v4l2_frequency *freq); + int (*enum_freq_bands)(struct v4l2_subdev *sd, struct v4l2_frequency_band *band); + int (*g_tuner)(struct v4l2_subdev *sd, struct v4l2_tuner *vt); + int (*s_tuner)(struct v4l2_subdev *sd, const struct v4l2_tuner *vt); + int (*g_modulator)(struct v4l2_subdev *sd, struct v4l2_modulator *vm); + int (*s_modulator)(struct v4l2_subdev *sd, const struct v4l2_modulator *vm); + int (*s_type_addr)(struct v4l2_subdev *sd, struct tuner_setup *type); + int (*s_config)(struct v4l2_subdev *sd, const struct v4l2_priv_tun_config *config); +}; + +/** + * struct v4l2_subdev_audio_ops - Callbacks used for audio-related settings + * + * @s_clock_freq: set the frequency (in Hz) of the audio clock output. + * Used to slave an audio processor to the video decoder, ensuring that + * audio and video remain synchronized. Usual values for the frequency + * are 48000, 44100 or 32000 Hz. If the frequency is not supported, then + * -EINVAL is returned. + * + * @s_i2s_clock_freq: sets I2S speed in bps. This is used to provide a standard + * way to select I2S clock used by driving digital audio streams at some + * board designs. Usual values for the frequency are 1024000 and 2048000. + * If the frequency is not supported, then %-EINVAL is returned. + * + * @s_routing: used to define the input and/or output pins of an audio chip, + * and any additional configuration data. + * Never attempt to use user-level input IDs (e.g. Composite, S-Video, + * Tuner) at this level. An i2c device shouldn't know about whether an + * input pin is connected to a Composite connector, become on another + * board or platform it might be connected to something else entirely. + * The calling driver is responsible for mapping a user-level input to + * the right pins on the i2c device. + * + * @s_stream: used to notify the audio code that stream will start or has + * stopped. + */ +struct v4l2_subdev_audio_ops { + int (*s_clock_freq)(struct v4l2_subdev *sd, u32 freq); + int (*s_i2s_clock_freq)(struct v4l2_subdev *sd, u32 freq); + int (*s_routing)(struct v4l2_subdev *sd, u32 input, u32 output, u32 config); + int (*s_stream)(struct v4l2_subdev *sd, int enable); +}; + +/** + * enum v4l2_mbus_frame_desc_entry - media bus frame description flags + * + * @V4L2_MBUS_FRAME_DESC_FL_LEN_MAX: + * Indicates that &struct v4l2_mbus_frame_desc_entry->length field + * specifies maximum data length. + * @V4L2_MBUS_FRAME_DESC_FL_BLOB: + * Indicates that the format does not have line offsets, i.e. + * the receiver should use 1D DMA. + */ +enum v4l2_mbus_frame_desc_flags { + V4L2_MBUS_FRAME_DESC_FL_LEN_MAX = BIT(0), + V4L2_MBUS_FRAME_DESC_FL_BLOB = BIT(1), +}; + +/** + * struct v4l2_mbus_frame_desc_entry - media bus frame description structure + * + * @flags: bitmask flags, as defined by &enum v4l2_mbus_frame_desc_flags. + * @pixelcode: media bus pixel code, valid if @flags + * %FRAME_DESC_FL_BLOB is not set. + * @length: number of octets per frame, valid if @flags + * %V4L2_MBUS_FRAME_DESC_FL_LEN_MAX is set. + */ +struct v4l2_mbus_frame_desc_entry { + enum v4l2_mbus_frame_desc_flags flags; + u32 pixelcode; + u32 length; +}; + +#define V4L2_FRAME_DESC_ENTRY_MAX 4 + +/** + * struct v4l2_mbus_frame_desc - media bus data frame description + * @entry: frame descriptors array + * @num_entries: number of entries in @entry array + */ +struct v4l2_mbus_frame_desc { + struct v4l2_mbus_frame_desc_entry entry[V4L2_FRAME_DESC_ENTRY_MAX]; + unsigned short num_entries; +}; + +/** + * struct v4l2_subdev_video_ops - Callbacks used when v4l device was opened + * in video mode. + * + * @s_routing: see s_routing in audio_ops, except this version is for video + * devices. + * + * @s_crystal_freq: sets the frequency of the crystal used to generate the + * clocks in Hz. An extra flags field allows device specific configuration + * regarding clock frequency dividers, etc. If not used, then set flags + * to 0. If the frequency is not supported, then -EINVAL is returned. + * + * @g_std: callback for VIDIOC_G_STD() ioctl handler code. + * + * @s_std: callback for VIDIOC_S_STD() ioctl handler code. + * + * @s_std_output: set v4l2_std_id for video OUTPUT devices. This is ignored by + * video input devices. + * + * @g_std_output: get current standard for video OUTPUT devices. This is ignored + * by video input devices. + * + * @querystd: callback for VIDIOC_QUERYSTD() ioctl handler code. + * + * @g_tvnorms: get &v4l2_std_id with all standards supported by the video + * CAPTURE device. This is ignored by video output devices. + * + * @g_tvnorms_output: get v4l2_std_id with all standards supported by the video + * OUTPUT device. This is ignored by video capture devices. + * + * @g_input_status: get input status. Same as the status field in the + * &struct v4l2_input + * + * @s_stream: used to notify the driver that a video stream will start or has + * stopped. + * + * @g_pixelaspect: callback to return the pixelaspect ratio. + * + * @g_frame_interval: callback for VIDIOC_SUBDEV_G_FRAME_INTERVAL() + * ioctl handler code. + * + * @s_frame_interval: callback for VIDIOC_SUBDEV_S_FRAME_INTERVAL() + * ioctl handler code. + * + * @s_dv_timings: Set custom dv timings in the sub device. This is used + * when sub device is capable of setting detailed timing information + * in the hardware to generate/detect the video signal. + * + * @g_dv_timings: Get custom dv timings in the sub device. + * + * @query_dv_timings: callback for VIDIOC_QUERY_DV_TIMINGS() ioctl handler code. + * + * @s_rx_buffer: set a host allocated memory buffer for the subdev. The subdev + * can adjust @size to a lower value and must not write more data to the + * buffer starting at @data than the original value of @size. + */ +struct v4l2_subdev_video_ops { + int (*s_routing)(struct v4l2_subdev *sd, u32 input, u32 output, u32 config); + int (*s_crystal_freq)(struct v4l2_subdev *sd, u32 freq, u32 flags); + int (*g_std)(struct v4l2_subdev *sd, v4l2_std_id *norm); + int (*s_std)(struct v4l2_subdev *sd, v4l2_std_id norm); + int (*s_std_output)(struct v4l2_subdev *sd, v4l2_std_id std); + int (*g_std_output)(struct v4l2_subdev *sd, v4l2_std_id *std); + int (*querystd)(struct v4l2_subdev *sd, v4l2_std_id *std); + int (*g_tvnorms)(struct v4l2_subdev *sd, v4l2_std_id *std); + int (*g_tvnorms_output)(struct v4l2_subdev *sd, v4l2_std_id *std); + int (*g_input_status)(struct v4l2_subdev *sd, u32 *status); + int (*s_stream)(struct v4l2_subdev *sd, int enable); + int (*g_pixelaspect)(struct v4l2_subdev *sd, struct v4l2_fract *aspect); + int (*g_frame_interval)(struct v4l2_subdev *sd, + struct v4l2_subdev_frame_interval *interval); + int (*s_frame_interval)(struct v4l2_subdev *sd, + struct v4l2_subdev_frame_interval *interval); + int (*s_dv_timings)(struct v4l2_subdev *sd, + struct v4l2_dv_timings *timings); + int (*g_dv_timings)(struct v4l2_subdev *sd, + struct v4l2_dv_timings *timings); + int (*query_dv_timings)(struct v4l2_subdev *sd, + struct v4l2_dv_timings *timings); + int (*s_rx_buffer)(struct v4l2_subdev *sd, void *buf, + unsigned int *size); +}; + +/** + * struct v4l2_subdev_vbi_ops - Callbacks used when v4l device was opened + * in video mode via the vbi device node. + * + * @decode_vbi_line: video decoders that support sliced VBI need to implement + * this ioctl. Field p of the &struct v4l2_decode_vbi_line is set to the + * start of the VBI data that was generated by the decoder. The driver + * then parses the sliced VBI data and sets the other fields in the + * struct accordingly. The pointer p is updated to point to the start of + * the payload which can be copied verbatim into the data field of the + * &struct v4l2_sliced_vbi_data. If no valid VBI data was found, then the + * type field is set to 0 on return. + * + * @s_vbi_data: used to generate VBI signals on a video signal. + * &struct v4l2_sliced_vbi_data is filled with the data packets that + * should be output. Note that if you set the line field to 0, then that + * VBI signal is disabled. If no valid VBI data was found, then the type + * field is set to 0 on return. + * + * @g_vbi_data: used to obtain the sliced VBI packet from a readback register. + * Not all video decoders support this. If no data is available because + * the readback register contains invalid or erroneous data %-EIO is + * returned. Note that you must fill in the 'id' member and the 'field' + * member (to determine whether CC data from the first or second field + * should be obtained). + * + * @g_sliced_vbi_cap: callback for VIDIOC_G_SLICED_VBI_CAP() ioctl handler + * code. + * + * @s_raw_fmt: setup the video encoder/decoder for raw VBI. + * + * @g_sliced_fmt: retrieve the current sliced VBI settings. + * + * @s_sliced_fmt: setup the sliced VBI settings. + */ +struct v4l2_subdev_vbi_ops { + int (*decode_vbi_line)(struct v4l2_subdev *sd, struct v4l2_decode_vbi_line *vbi_line); + int (*s_vbi_data)(struct v4l2_subdev *sd, const struct v4l2_sliced_vbi_data *vbi_data); + int (*g_vbi_data)(struct v4l2_subdev *sd, struct v4l2_sliced_vbi_data *vbi_data); + int (*g_sliced_vbi_cap)(struct v4l2_subdev *sd, struct v4l2_sliced_vbi_cap *cap); + int (*s_raw_fmt)(struct v4l2_subdev *sd, struct v4l2_vbi_format *fmt); + int (*g_sliced_fmt)(struct v4l2_subdev *sd, struct v4l2_sliced_vbi_format *fmt); + int (*s_sliced_fmt)(struct v4l2_subdev *sd, struct v4l2_sliced_vbi_format *fmt); +}; + +/** + * struct v4l2_subdev_sensor_ops - v4l2-subdev sensor operations + * @g_skip_top_lines: number of lines at the top of the image to be skipped. + * This is needed for some sensors, which always corrupt + * several top lines of the output image, or which send their + * metadata in them. + * @g_skip_frames: number of frames to skip at stream start. This is needed for + * buggy sensors that generate faulty frames when they are + * turned on. + */ +struct v4l2_subdev_sensor_ops { + int (*g_skip_top_lines)(struct v4l2_subdev *sd, u32 *lines); + int (*g_skip_frames)(struct v4l2_subdev *sd, u32 *frames); +}; + +/** + * enum v4l2_subdev_ir_mode- describes the type of IR supported + * + * @V4L2_SUBDEV_IR_MODE_PULSE_WIDTH: IR uses struct ir_raw_event records + */ +enum v4l2_subdev_ir_mode { + V4L2_SUBDEV_IR_MODE_PULSE_WIDTH, +}; + +/** + * struct v4l2_subdev_ir_parameters - Parameters for IR TX or TX + * + * @bytes_per_data_element: bytes per data element of data in read or + * write call. + * @mode: IR mode as defined by &enum v4l2_subdev_ir_mode. + * @enable: device is active if true + * @interrupt_enable: IR interrupts are enabled if true + * @shutdown: if true: set hardware to low/no power, false: normal mode + * + * @modulation: if true, it uses carrier, if false: baseband + * @max_pulse_width: maximum pulse width in ns, valid only for baseband signal + * @carrier_freq: carrier frequency in Hz, valid only for modulated signal + * @duty_cycle: duty cycle percentage, valid only for modulated signal + * @invert_level: invert signal level + * + * @invert_carrier_sense: Send 0/space as a carrier burst. used only in TX. + * + * @noise_filter_min_width: min time of a valid pulse, in ns. Used only for RX. + * @carrier_range_lower: Lower carrier range, in Hz, valid only for modulated + * signal. Used only for RX. + * @carrier_range_upper: Upper carrier range, in Hz, valid only for modulated + * signal. Used only for RX. + * @resolution: The receive resolution, in ns . Used only for RX. + */ +struct v4l2_subdev_ir_parameters { + unsigned int bytes_per_data_element; + enum v4l2_subdev_ir_mode mode; + + bool enable; + bool interrupt_enable; + bool shutdown; + + bool modulation; + u32 max_pulse_width; + unsigned int carrier_freq; + unsigned int duty_cycle; + bool invert_level; + + /* Tx only */ + bool invert_carrier_sense; + + /* Rx only */ + u32 noise_filter_min_width; + unsigned int carrier_range_lower; + unsigned int carrier_range_upper; + u32 resolution; +}; + +/** + * struct v4l2_subdev_ir_ops - operations for IR subdevices + * + * @rx_read: Reads received codes or pulse width data. + * The semantics are similar to a non-blocking read() call. + * @rx_g_parameters: Get the current operating parameters and state of + * the IR receiver. + * @rx_s_parameters: Set the current operating parameters and state of + * the IR receiver. It is recommended to call + * [rt]x_g_parameters first to fill out the current state, and only change + * the fields that need to be changed. Upon return, the actual device + * operating parameters and state will be returned. Note that hardware + * limitations may prevent the actual settings from matching the requested + * settings - e.g. an actual carrier setting of 35,904 Hz when 36,000 Hz + * was requested. An exception is when the shutdown parameter is true. + * The last used operational parameters will be returned, but the actual + * state of the hardware be different to minimize power consumption and + * processing when shutdown is true. + * + * @tx_write: Writes codes or pulse width data for transmission. + * The semantics are similar to a non-blocking write() call. + * @tx_g_parameters: Get the current operating parameters and state of + * the IR transmitter. + * @tx_s_parameters: Set the current operating parameters and state of + * the IR transmitter. It is recommended to call + * [rt]x_g_parameters first to fill out the current state, and only change + * the fields that need to be changed. Upon return, the actual device + * operating parameters and state will be returned. Note that hardware + * limitations may prevent the actual settings from matching the requested + * settings - e.g. an actual carrier setting of 35,904 Hz when 36,000 Hz + * was requested. An exception is when the shutdown parameter is true. + * The last used operational parameters will be returned, but the actual + * state of the hardware be different to minimize power consumption and + * processing when shutdown is true. + */ +struct v4l2_subdev_ir_ops { + /* Receiver */ + int (*rx_read)(struct v4l2_subdev *sd, u8 *buf, size_t count, + ssize_t *num); + + int (*rx_g_parameters)(struct v4l2_subdev *sd, + struct v4l2_subdev_ir_parameters *params); + int (*rx_s_parameters)(struct v4l2_subdev *sd, + struct v4l2_subdev_ir_parameters *params); + + /* Transmitter */ + int (*tx_write)(struct v4l2_subdev *sd, u8 *buf, size_t count, + ssize_t *num); + + int (*tx_g_parameters)(struct v4l2_subdev *sd, + struct v4l2_subdev_ir_parameters *params); + int (*tx_s_parameters)(struct v4l2_subdev *sd, + struct v4l2_subdev_ir_parameters *params); +}; + +/** + * struct v4l2_subdev_pad_config - Used for storing subdev pad information. + * + * @try_fmt: &struct v4l2_mbus_framefmt + * @try_crop: &struct v4l2_rect to be used for crop + * @try_compose: &struct v4l2_rect to be used for compose + * + * This structure only needs to be passed to the pad op if the 'which' field + * of the main argument is set to %V4L2_SUBDEV_FORMAT_TRY. For + * %V4L2_SUBDEV_FORMAT_ACTIVE it is safe to pass %NULL. + */ +struct v4l2_subdev_pad_config { + struct v4l2_mbus_framefmt try_fmt; + struct v4l2_rect try_crop; + struct v4l2_rect try_compose; +}; + +/** + * struct v4l2_subdev_pad_ops - v4l2-subdev pad level operations + * + * @init_cfg: initialize the pad config to default values + * @enum_mbus_code: callback for VIDIOC_SUBDEV_ENUM_MBUS_CODE() ioctl handler + * code. + * @enum_frame_size: callback for VIDIOC_SUBDEV_ENUM_FRAME_SIZE() ioctl handler + * code. + * + * @enum_frame_interval: callback for VIDIOC_SUBDEV_ENUM_FRAME_INTERVAL() ioctl + * handler code. + * + * @get_fmt: callback for VIDIOC_SUBDEV_G_FMT() ioctl handler code. + * + * @set_fmt: callback for VIDIOC_SUBDEV_S_FMT() ioctl handler code. + * + * @get_selection: callback for VIDIOC_SUBDEV_G_SELECTION() ioctl handler code. + * + * @set_selection: callback for VIDIOC_SUBDEV_S_SELECTION() ioctl handler code. + * + * @get_edid: callback for VIDIOC_SUBDEV_G_EDID() ioctl handler code. + * + * @set_edid: callback for VIDIOC_SUBDEV_S_EDID() ioctl handler code. + * + * @dv_timings_cap: callback for VIDIOC_SUBDEV_DV_TIMINGS_CAP() ioctl handler + * code. + * + * @enum_dv_timings: callback for VIDIOC_SUBDEV_ENUM_DV_TIMINGS() ioctl handler + * code. + * + * @link_validate: used by the media controller code to check if the links + * that belongs to a pipeline can be used for stream. + * + * @get_frame_desc: get the current low level media bus frame parameters. + * + * @set_frame_desc: set the low level media bus frame parameters, @fd array + * may be adjusted by the subdev driver to device capabilities. + * + * @get_mbus_config: get the media bus configuration of a remote sub-device. + * The media bus configuration is usually retrieved from the + * firmware interface at sub-device probe time, immediately + * applied to the hardware and eventually adjusted by the + * driver. Remote sub-devices (usually video receivers) shall + * use this operation to query the transmitting end bus + * configuration in order to adjust their own one accordingly. + * Callers should make sure they get the most up-to-date as + * possible configuration from the remote end, likely calling + * this operation as close as possible to stream on time. The + * operation shall fail if the pad index it has been called on + * is not valid or in case of unrecoverable failures. + * + * @set_mbus_config: set the media bus configuration of a remote sub-device. + * This operations is intended to allow, in combination with + * the get_mbus_config operation, the negotiation of media bus + * configuration parameters between media sub-devices. The + * operation shall not fail if the requested configuration is + * not supported, but the driver shall update the content of + * the %config argument to reflect what has been actually + * applied to the hardware. The operation shall fail if the + * pad index it has been called on is not valid or in case of + * unrecoverable failures. + */ +struct v4l2_subdev_pad_ops { + int (*init_cfg)(struct v4l2_subdev *sd, + struct v4l2_subdev_pad_config *cfg); + int (*enum_mbus_code)(struct v4l2_subdev *sd, + struct v4l2_subdev_pad_config *cfg, + struct v4l2_subdev_mbus_code_enum *code); + int (*enum_frame_size)(struct v4l2_subdev *sd, + struct v4l2_subdev_pad_config *cfg, + struct v4l2_subdev_frame_size_enum *fse); + int (*enum_frame_interval)(struct v4l2_subdev *sd, + struct v4l2_subdev_pad_config *cfg, + struct v4l2_subdev_frame_interval_enum *fie); + int (*get_fmt)(struct v4l2_subdev *sd, + struct v4l2_subdev_pad_config *cfg, + struct v4l2_subdev_format *format); + int (*set_fmt)(struct v4l2_subdev *sd, + struct v4l2_subdev_pad_config *cfg, + struct v4l2_subdev_format *format); + int (*get_selection)(struct v4l2_subdev *sd, + struct v4l2_subdev_pad_config *cfg, + struct v4l2_subdev_selection *sel); + int (*set_selection)(struct v4l2_subdev *sd, + struct v4l2_subdev_pad_config *cfg, + struct v4l2_subdev_selection *sel); + int (*get_edid)(struct v4l2_subdev *sd, struct v4l2_edid *edid); + int (*set_edid)(struct v4l2_subdev *sd, struct v4l2_edid *edid); + int (*dv_timings_cap)(struct v4l2_subdev *sd, + struct v4l2_dv_timings_cap *cap); + int (*enum_dv_timings)(struct v4l2_subdev *sd, + struct v4l2_enum_dv_timings *timings); +#ifdef CONFIG_MEDIA_CONTROLLER + int (*link_validate)(struct v4l2_subdev *sd, struct media_link *link, + struct v4l2_subdev_format *source_fmt, + struct v4l2_subdev_format *sink_fmt); +#endif /* CONFIG_MEDIA_CONTROLLER */ + int (*get_frame_desc)(struct v4l2_subdev *sd, unsigned int pad, + struct v4l2_mbus_frame_desc *fd); + int (*set_frame_desc)(struct v4l2_subdev *sd, unsigned int pad, + struct v4l2_mbus_frame_desc *fd); + int (*get_mbus_config)(struct v4l2_subdev *sd, unsigned int pad, + struct v4l2_mbus_config *config); + int (*set_mbus_config)(struct v4l2_subdev *sd, unsigned int pad, + struct v4l2_mbus_config *config); +}; + +/** + * struct v4l2_subdev_ops - Subdev operations + * + * @core: pointer to &struct v4l2_subdev_core_ops. Can be %NULL + * @tuner: pointer to &struct v4l2_subdev_tuner_ops. Can be %NULL + * @audio: pointer to &struct v4l2_subdev_audio_ops. Can be %NULL + * @video: pointer to &struct v4l2_subdev_video_ops. Can be %NULL + * @vbi: pointer to &struct v4l2_subdev_vbi_ops. Can be %NULL + * @ir: pointer to &struct v4l2_subdev_ir_ops. Can be %NULL + * @sensor: pointer to &struct v4l2_subdev_sensor_ops. Can be %NULL + * @pad: pointer to &struct v4l2_subdev_pad_ops. Can be %NULL + */ +struct v4l2_subdev_ops { + const struct v4l2_subdev_core_ops *core; + const struct v4l2_subdev_tuner_ops *tuner; + const struct v4l2_subdev_audio_ops *audio; + const struct v4l2_subdev_video_ops *video; + const struct v4l2_subdev_vbi_ops *vbi; + const struct v4l2_subdev_ir_ops *ir; + const struct v4l2_subdev_sensor_ops *sensor; + const struct v4l2_subdev_pad_ops *pad; +}; + +/** + * struct v4l2_subdev_internal_ops - V4L2 subdev internal ops + * + * @registered: called when this subdev is registered. When called the v4l2_dev + * field is set to the correct v4l2_device. + * + * @unregistered: called when this subdev is unregistered. When called the + * v4l2_dev field is still set to the correct v4l2_device. + * + * @open: called when the subdev device node is opened by an application. + * + * @close: called when the subdev device node is closed. Please note that + * it is possible for @close to be called after @unregistered! + * + * @release: called when the last user of the subdev device is gone. This + * happens after the @unregistered callback and when the last open + * filehandle to the v4l-subdevX device node was closed. If no device + * node was created for this sub-device, then the @release callback + * is called right after the @unregistered callback. + * The @release callback is typically used to free the memory containing + * the v4l2_subdev structure. It is almost certainly required for any + * sub-device that sets the V4L2_SUBDEV_FL_HAS_DEVNODE flag. + * + * .. note:: + * Never call this from drivers, only the v4l2 framework can call + * these ops. + */ +struct v4l2_subdev_internal_ops { + int (*registered)(struct v4l2_subdev *sd); + void (*unregistered)(struct v4l2_subdev *sd); + int (*open)(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh); + int (*close)(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh); + void (*release)(struct v4l2_subdev *sd); +}; + +#define V4L2_SUBDEV_NAME_SIZE 32 + +/* Set this flag if this subdev is a i2c device. */ +#define V4L2_SUBDEV_FL_IS_I2C (1U << 0) +/* Set this flag if this subdev is a spi device. */ +#define V4L2_SUBDEV_FL_IS_SPI (1U << 1) +/* Set this flag if this subdev needs a device node. */ +#define V4L2_SUBDEV_FL_HAS_DEVNODE (1U << 2) +/* + * Set this flag if this subdev generates events. + * Note controls can send events, thus drivers exposing controls + * should set this flag. + */ +#define V4L2_SUBDEV_FL_HAS_EVENTS (1U << 3) + +struct regulator_bulk_data; + +/** + * struct v4l2_subdev_platform_data - regulators config struct + * + * @regulators: Optional regulators used to power on/off the subdevice + * @num_regulators: Number of regululators + * @host_priv: Per-subdevice data, specific for a certain video host device + */ +struct v4l2_subdev_platform_data { + struct regulator_bulk_data *regulators; + int num_regulators; + + void *host_priv; +}; + +/** + * struct v4l2_subdev - describes a V4L2 sub-device + * + * @entity: pointer to &struct media_entity + * @list: List of sub-devices + * @owner: The owner is the same as the driver's &struct device owner. + * @owner_v4l2_dev: true if the &sd->owner matches the owner of @v4l2_dev->dev + * owner. Initialized by v4l2_device_register_subdev(). + * @flags: subdev flags. Can be: + * %V4L2_SUBDEV_FL_IS_I2C - Set this flag if this subdev is a i2c device; + * %V4L2_SUBDEV_FL_IS_SPI - Set this flag if this subdev is a spi device; + * %V4L2_SUBDEV_FL_HAS_DEVNODE - Set this flag if this subdev needs a + * device node; + * %V4L2_SUBDEV_FL_HAS_EVENTS - Set this flag if this subdev generates + * events. + * + * @v4l2_dev: pointer to struct &v4l2_device + * @ops: pointer to struct &v4l2_subdev_ops + * @internal_ops: pointer to struct &v4l2_subdev_internal_ops. + * Never call these internal ops from within a driver! + * @ctrl_handler: The control handler of this subdev. May be NULL. + * @name: Name of the sub-device. Please notice that the name must be unique. + * @grp_id: can be used to group similar subdevs. Value is driver-specific + * @dev_priv: pointer to private data + * @host_priv: pointer to private data used by the device where the subdev + * is attached. + * @devnode: subdev device node + * @dev: pointer to the physical device, if any + * @fwnode: The fwnode_handle of the subdev, usually the same as + * either dev->of_node->fwnode or dev->fwnode (whichever is non-NULL). + * @async_list: Links this subdev to a global subdev_list or @notifier->done + * list. + * @asd: Pointer to respective &struct v4l2_async_subdev. + * @notifier: Pointer to the managing notifier. + * @subdev_notifier: A sub-device notifier implicitly registered for the sub- + * device using v4l2_device_register_sensor_subdev(). + * @pdata: common part of subdevice platform data + * + * Each instance of a subdev driver should create this struct, either + * stand-alone or embedded in a larger struct. + * + * This structure should be initialized by v4l2_subdev_init() or one of + * its variants: v4l2_spi_subdev_init(), v4l2_i2c_subdev_init(). + */ +struct v4l2_subdev { +#if defined(CONFIG_MEDIA_CONTROLLER) + struct media_entity entity; +#endif + struct list_head list; + struct module *owner; + bool owner_v4l2_dev; + u32 flags; + struct v4l2_device *v4l2_dev; + const struct v4l2_subdev_ops *ops; + const struct v4l2_subdev_internal_ops *internal_ops; + struct v4l2_ctrl_handler *ctrl_handler; + char name[V4L2_SUBDEV_NAME_SIZE]; + u32 grp_id; + void *dev_priv; + void *host_priv; + struct video_device *devnode; + struct device *dev; + struct fwnode_handle *fwnode; + struct list_head async_list; + struct v4l2_async_subdev *asd; + struct v4l2_async_notifier *notifier; + struct v4l2_async_notifier *subdev_notifier; + struct v4l2_subdev_platform_data *pdata; +}; + + +/** + * media_entity_to_v4l2_subdev - Returns a &struct v4l2_subdev from + * the &struct media_entity embedded in it. + * + * @ent: pointer to &struct media_entity. + */ +#define media_entity_to_v4l2_subdev(ent) \ +({ \ + typeof(ent) __me_sd_ent = (ent); \ + \ + __me_sd_ent ? \ + container_of(__me_sd_ent, struct v4l2_subdev, entity) : \ + NULL; \ +}) + +/** + * vdev_to_v4l2_subdev - Returns a &struct v4l2_subdev from + * the &struct video_device embedded on it. + * + * @vdev: pointer to &struct video_device + */ +#define vdev_to_v4l2_subdev(vdev) \ + ((struct v4l2_subdev *)video_get_drvdata(vdev)) + +/** + * struct v4l2_subdev_fh - Used for storing subdev information per file handle + * + * @vfh: pointer to &struct v4l2_fh + * @pad: pointer to &struct v4l2_subdev_pad_config + * @owner: module pointer to the owner of this file handle + */ +struct v4l2_subdev_fh { + struct v4l2_fh vfh; + struct module *owner; +#if defined(CONFIG_VIDEO_V4L2_SUBDEV_API) + struct v4l2_subdev_pad_config *pad; +#endif +}; + +/** + * to_v4l2_subdev_fh - Returns a &struct v4l2_subdev_fh from + * the &struct v4l2_fh embedded on it. + * + * @fh: pointer to &struct v4l2_fh + */ +#define to_v4l2_subdev_fh(fh) \ + container_of(fh, struct v4l2_subdev_fh, vfh) + +#if defined(CONFIG_VIDEO_V4L2_SUBDEV_API) + +/** + * v4l2_subdev_get_try_format - ancillary routine to call + * &struct v4l2_subdev_pad_config->try_fmt + * + * @sd: pointer to &struct v4l2_subdev + * @cfg: pointer to &struct v4l2_subdev_pad_config array. + * @pad: index of the pad in the @cfg array. + */ +static inline struct v4l2_mbus_framefmt * +v4l2_subdev_get_try_format(struct v4l2_subdev *sd, + struct v4l2_subdev_pad_config *cfg, + unsigned int pad) +{ + if (WARN_ON(pad >= sd->entity.num_pads)) + pad = 0; + return &cfg[pad].try_fmt; +} + +/** + * v4l2_subdev_get_try_crop - ancillary routine to call + * &struct v4l2_subdev_pad_config->try_crop + * + * @sd: pointer to &struct v4l2_subdev + * @cfg: pointer to &struct v4l2_subdev_pad_config array. + * @pad: index of the pad in the @cfg array. + */ +static inline struct v4l2_rect * +v4l2_subdev_get_try_crop(struct v4l2_subdev *sd, + struct v4l2_subdev_pad_config *cfg, + unsigned int pad) +{ + if (WARN_ON(pad >= sd->entity.num_pads)) + pad = 0; + return &cfg[pad].try_crop; +} + +/** + * v4l2_subdev_get_try_compose - ancillary routine to call + * &struct v4l2_subdev_pad_config->try_compose + * + * @sd: pointer to &struct v4l2_subdev + * @cfg: pointer to &struct v4l2_subdev_pad_config array. + * @pad: index of the pad in the @cfg array. + */ +static inline struct v4l2_rect * +v4l2_subdev_get_try_compose(struct v4l2_subdev *sd, + struct v4l2_subdev_pad_config *cfg, + unsigned int pad) +{ + if (WARN_ON(pad >= sd->entity.num_pads)) + pad = 0; + return &cfg[pad].try_compose; +} + +#endif + +extern const struct v4l2_file_operations v4l2_subdev_fops; + +/** + * v4l2_set_subdevdata - Sets V4L2 dev private device data + * + * @sd: pointer to &struct v4l2_subdev + * @p: pointer to the private device data to be stored. + */ +static inline void v4l2_set_subdevdata(struct v4l2_subdev *sd, void *p) +{ + sd->dev_priv = p; +} + +/** + * v4l2_get_subdevdata - Gets V4L2 dev private device data + * + * @sd: pointer to &struct v4l2_subdev + * + * Returns the pointer to the private device data to be stored. + */ +static inline void *v4l2_get_subdevdata(const struct v4l2_subdev *sd) +{ + return sd->dev_priv; +} + +/** + * v4l2_set_subdev_hostdata - Sets V4L2 dev private host data + * + * @sd: pointer to &struct v4l2_subdev + * @p: pointer to the private data to be stored. + */ +static inline void v4l2_set_subdev_hostdata(struct v4l2_subdev *sd, void *p) +{ + sd->host_priv = p; +} + +/** + * v4l2_get_subdev_hostdata - Gets V4L2 dev private data + * + * @sd: pointer to &struct v4l2_subdev + * + * Returns the pointer to the private host data to be stored. + */ +static inline void *v4l2_get_subdev_hostdata(const struct v4l2_subdev *sd) +{ + return sd->host_priv; +} + +#ifdef CONFIG_MEDIA_CONTROLLER + +/** + * v4l2_subdev_get_fwnode_pad_1_to_1 - Get pad number from a subdev fwnode + * endpoint, assuming 1:1 port:pad + * + * @entity: Pointer to the subdev entity + * @endpoint: Pointer to a parsed fwnode endpoint + * + * This function can be used as the .get_fwnode_pad operation for + * subdevices that map port numbers and pad indexes 1:1. If the endpoint + * is owned by the subdevice, the function returns the endpoint port + * number. + * + * Returns the endpoint port number on success or a negative error code. + */ +int v4l2_subdev_get_fwnode_pad_1_to_1(struct media_entity *entity, + struct fwnode_endpoint *endpoint); + +/** + * v4l2_subdev_link_validate_default - validates a media link + * + * @sd: pointer to &struct v4l2_subdev + * @link: pointer to &struct media_link + * @source_fmt: pointer to &struct v4l2_subdev_format + * @sink_fmt: pointer to &struct v4l2_subdev_format + * + * This function ensures that width, height and the media bus pixel + * code are equal on both source and sink of the link. + */ +int v4l2_subdev_link_validate_default(struct v4l2_subdev *sd, + struct media_link *link, + struct v4l2_subdev_format *source_fmt, + struct v4l2_subdev_format *sink_fmt); + +/** + * v4l2_subdev_link_validate - validates a media link + * + * @link: pointer to &struct media_link + * + * This function calls the subdev's link_validate ops to validate + * if a media link is valid for streaming. It also internally + * calls v4l2_subdev_link_validate_default() to ensure that + * width, height and the media bus pixel code are equal on both + * source and sink of the link. + */ +int v4l2_subdev_link_validate(struct media_link *link); + +/** + * v4l2_subdev_alloc_pad_config - Allocates memory for pad config + * + * @sd: pointer to struct v4l2_subdev + */ +struct +v4l2_subdev_pad_config *v4l2_subdev_alloc_pad_config(struct v4l2_subdev *sd); + +/** + * v4l2_subdev_free_pad_config - Frees memory allocated by + * v4l2_subdev_alloc_pad_config(). + * + * @cfg: pointer to &struct v4l2_subdev_pad_config + */ +void v4l2_subdev_free_pad_config(struct v4l2_subdev_pad_config *cfg); +#endif /* CONFIG_MEDIA_CONTROLLER */ + +/** + * v4l2_subdev_init - initializes the sub-device struct + * + * @sd: pointer to the &struct v4l2_subdev to be initialized + * @ops: pointer to &struct v4l2_subdev_ops. + */ +void v4l2_subdev_init(struct v4l2_subdev *sd, + const struct v4l2_subdev_ops *ops); + +extern const struct v4l2_subdev_ops v4l2_subdev_call_wrappers; + +/** + * v4l2_subdev_call - call an operation of a v4l2_subdev. + * + * @sd: pointer to the &struct v4l2_subdev + * @o: name of the element at &struct v4l2_subdev_ops that contains @f. + * Each element there groups a set of callbacks functions. + * @f: callback function to be called. + * The callback functions are defined in groups, according to + * each element at &struct v4l2_subdev_ops. + * @args: arguments for @f. + * + * Example: err = v4l2_subdev_call(sd, video, s_std, norm); + */ +#define v4l2_subdev_call(sd, o, f, args...) \ + ({ \ + struct v4l2_subdev *__sd = (sd); \ + int __result; \ + if (!__sd) \ + __result = -ENODEV; \ + else if (!(__sd->ops->o && __sd->ops->o->f)) \ + __result = -ENOIOCTLCMD; \ + else if (v4l2_subdev_call_wrappers.o && \ + v4l2_subdev_call_wrappers.o->f) \ + __result = v4l2_subdev_call_wrappers.o->f( \ + __sd, ##args); \ + else \ + __result = __sd->ops->o->f(__sd, ##args); \ + __result; \ + }) + +/** + * v4l2_subdev_has_op - Checks if a subdev defines a certain operation. + * + * @sd: pointer to the &struct v4l2_subdev + * @o: The group of callback functions in &struct v4l2_subdev_ops + * which @f is a part of. + * @f: callback function to be checked for its existence. + */ +#define v4l2_subdev_has_op(sd, o, f) \ + ((sd)->ops->o && (sd)->ops->o->f) + +/** + * v4l2_subdev_notify_event() - Delivers event notification for subdevice + * @sd: The subdev for which to deliver the event + * @ev: The event to deliver + * + * Will deliver the specified event to all userspace event listeners which are + * subscribed to the v42l subdev event queue as well as to the bridge driver + * using the notify callback. The notification type for the notify callback + * will be %V4L2_DEVICE_NOTIFY_EVENT. + */ +void v4l2_subdev_notify_event(struct v4l2_subdev *sd, + const struct v4l2_event *ev); + +#endif diff --git a/include/media/videobuf-core.h b/include/media/videobuf-core.h new file mode 100644 index 000000000..2e01b2e9a --- /dev/null +++ b/include/media/videobuf-core.h @@ -0,0 +1,233 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * generic helper functions for handling video4linux capture buffers + * + * (c) 2007 Mauro Carvalho Chehab, <mchehab@kernel.org> + * + * Highly based on video-buf written originally by: + * (c) 2001,02 Gerd Knorr <kraxel@bytesex.org> + * (c) 2006 Mauro Carvalho Chehab, <mchehab@kernel.org> + * (c) 2006 Ted Walther and John Sokol + */ + +#ifndef _VIDEOBUF_CORE_H +#define _VIDEOBUF_CORE_H + +#include <linux/poll.h> +#include <linux/videodev2.h> + +#define UNSET (-1U) + + +struct videobuf_buffer; +struct videobuf_queue; + +/* --------------------------------------------------------------------- */ + +/* + * A small set of helper functions to manage video4linux buffers. + * + * struct videobuf_buffer holds the data structures used by the helper + * functions, additionally some commonly used fields for v4l buffers + * (width, height, lists, waitqueue) are in there. That struct should + * be used as first element in the drivers buffer struct. + * + * about the mmap helpers (videobuf_mmap_*): + * + * The mmaper function allows to map any subset of contiguous buffers. + * This includes one mmap() call for all buffers (which the original + * video4linux API uses) as well as one mmap() for every single buffer + * (which v4l2 uses). + * + * If there is a valid mapping for a buffer, buffer->baddr/bsize holds + * userspace address + size which can be fed into the + * videobuf_dma_init_user function listed above. + * + */ + +struct videobuf_mapping { + unsigned int count; + struct videobuf_queue *q; +}; + +enum videobuf_state { + VIDEOBUF_NEEDS_INIT = 0, + VIDEOBUF_PREPARED = 1, + VIDEOBUF_QUEUED = 2, + VIDEOBUF_ACTIVE = 3, + VIDEOBUF_DONE = 4, + VIDEOBUF_ERROR = 5, + VIDEOBUF_IDLE = 6, +}; + +struct videobuf_buffer { + unsigned int i; + u32 magic; + + /* info about the buffer */ + unsigned int width; + unsigned int height; + unsigned int bytesperline; /* use only if != 0 */ + unsigned long size; + enum v4l2_field field; + enum videobuf_state state; + struct list_head stream; /* QBUF/DQBUF list */ + + /* touched by irq handler */ + struct list_head queue; + wait_queue_head_t done; + unsigned int field_count; + u64 ts; + + /* Memory type */ + enum v4l2_memory memory; + + /* buffer size */ + size_t bsize; + + /* buffer offset (mmap + overlay) */ + size_t boff; + + /* buffer addr (userland ptr!) */ + unsigned long baddr; + + /* for mmap'ed buffers */ + struct videobuf_mapping *map; + + /* Private pointer to allow specific methods to store their data */ + int privsize; + void *priv; +}; + +struct videobuf_queue_ops { + int (*buf_setup)(struct videobuf_queue *q, + unsigned int *count, unsigned int *size); + int (*buf_prepare)(struct videobuf_queue *q, + struct videobuf_buffer *vb, + enum v4l2_field field); + void (*buf_queue)(struct videobuf_queue *q, + struct videobuf_buffer *vb); + void (*buf_release)(struct videobuf_queue *q, + struct videobuf_buffer *vb); +}; + +#define MAGIC_QTYPE_OPS 0x12261003 + +/* Helper operations - device type dependent */ +struct videobuf_qtype_ops { + u32 magic; + + struct videobuf_buffer *(*alloc_vb)(size_t size); + void *(*vaddr) (struct videobuf_buffer *buf); + int (*iolock) (struct videobuf_queue *q, + struct videobuf_buffer *vb, + struct v4l2_framebuffer *fbuf); + int (*sync) (struct videobuf_queue *q, + struct videobuf_buffer *buf); + int (*mmap_mapper) (struct videobuf_queue *q, + struct videobuf_buffer *buf, + struct vm_area_struct *vma); +}; + +struct videobuf_queue { + struct mutex vb_lock; + struct mutex *ext_lock; + spinlock_t *irqlock; + struct device *dev; + + wait_queue_head_t wait; /* wait if queue is empty */ + + enum v4l2_buf_type type; + unsigned int msize; + enum v4l2_field field; + enum v4l2_field last; /* for field=V4L2_FIELD_ALTERNATE */ + struct videobuf_buffer *bufs[VIDEO_MAX_FRAME]; + const struct videobuf_queue_ops *ops; + struct videobuf_qtype_ops *int_ops; + + unsigned int streaming:1; + unsigned int reading:1; + + /* capture via mmap() + ioctl(QBUF/DQBUF) */ + struct list_head stream; + + /* capture via read() */ + unsigned int read_off; + struct videobuf_buffer *read_buf; + + /* driver private data */ + void *priv_data; +}; + +static inline void videobuf_queue_lock(struct videobuf_queue *q) +{ + if (!q->ext_lock) + mutex_lock(&q->vb_lock); +} + +static inline void videobuf_queue_unlock(struct videobuf_queue *q) +{ + if (!q->ext_lock) + mutex_unlock(&q->vb_lock); +} + +int videobuf_waiton(struct videobuf_queue *q, struct videobuf_buffer *vb, + int non_blocking, int intr); +int videobuf_iolock(struct videobuf_queue *q, struct videobuf_buffer *vb, + struct v4l2_framebuffer *fbuf); + +struct videobuf_buffer *videobuf_alloc_vb(struct videobuf_queue *q); + +/* Used on videobuf-dvb */ +void *videobuf_queue_to_vaddr(struct videobuf_queue *q, + struct videobuf_buffer *buf); + +void videobuf_queue_core_init(struct videobuf_queue *q, + const struct videobuf_queue_ops *ops, + struct device *dev, + spinlock_t *irqlock, + enum v4l2_buf_type type, + enum v4l2_field field, + unsigned int msize, + void *priv, + struct videobuf_qtype_ops *int_ops, + struct mutex *ext_lock); +int videobuf_queue_is_busy(struct videobuf_queue *q); +void videobuf_queue_cancel(struct videobuf_queue *q); + +enum v4l2_field videobuf_next_field(struct videobuf_queue *q); +int videobuf_reqbufs(struct videobuf_queue *q, + struct v4l2_requestbuffers *req); +int videobuf_querybuf(struct videobuf_queue *q, struct v4l2_buffer *b); +int videobuf_qbuf(struct videobuf_queue *q, + struct v4l2_buffer *b); +int videobuf_dqbuf(struct videobuf_queue *q, + struct v4l2_buffer *b, int nonblocking); +int videobuf_streamon(struct videobuf_queue *q); +int videobuf_streamoff(struct videobuf_queue *q); + +void videobuf_stop(struct videobuf_queue *q); + +int videobuf_read_start(struct videobuf_queue *q); +void videobuf_read_stop(struct videobuf_queue *q); +ssize_t videobuf_read_stream(struct videobuf_queue *q, + char __user *data, size_t count, loff_t *ppos, + int vbihack, int nonblocking); +ssize_t videobuf_read_one(struct videobuf_queue *q, + char __user *data, size_t count, loff_t *ppos, + int nonblocking); +__poll_t videobuf_poll_stream(struct file *file, + struct videobuf_queue *q, + poll_table *wait); + +int videobuf_mmap_setup(struct videobuf_queue *q, + unsigned int bcount, unsigned int bsize, + enum v4l2_memory memory); +int __videobuf_mmap_setup(struct videobuf_queue *q, + unsigned int bcount, unsigned int bsize, + enum v4l2_memory memory); +int videobuf_mmap_free(struct videobuf_queue *q); +int videobuf_mmap_mapper(struct videobuf_queue *q, + struct vm_area_struct *vma); + +#endif diff --git a/include/media/videobuf-dma-contig.h b/include/media/videobuf-dma-contig.h new file mode 100644 index 000000000..525883b2c --- /dev/null +++ b/include/media/videobuf-dma-contig.h @@ -0,0 +1,30 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * helper functions for physically contiguous capture buffers + * + * The functions support hardware lacking scatter gather support + * (i.e. the buffers must be linear in physical memory) + * + * Copyright (c) 2008 Magnus Damm + */ +#ifndef _VIDEOBUF_DMA_CONTIG_H +#define _VIDEOBUF_DMA_CONTIG_H + +#include <linux/dma-mapping.h> +#include <media/videobuf-core.h> + +void videobuf_queue_dma_contig_init(struct videobuf_queue *q, + const struct videobuf_queue_ops *ops, + struct device *dev, + spinlock_t *irqlock, + enum v4l2_buf_type type, + enum v4l2_field field, + unsigned int msize, + void *priv, + struct mutex *ext_lock); + +dma_addr_t videobuf_to_dma_contig(struct videobuf_buffer *buf); +void videobuf_dma_contig_free(struct videobuf_queue *q, + struct videobuf_buffer *buf); + +#endif /* _VIDEOBUF_DMA_CONTIG_H */ diff --git a/include/media/videobuf-dma-sg.h b/include/media/videobuf-dma-sg.h new file mode 100644 index 000000000..930ff8d45 --- /dev/null +++ b/include/media/videobuf-dma-sg.h @@ -0,0 +1,102 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * helper functions for SG DMA video4linux capture buffers + * + * The functions expect the hardware being able to scatter gather + * (i.e. the buffers are not linear in physical memory, but fragmented + * into PAGE_SIZE chunks). They also assume the driver does not need + * to touch the video data. + * + * (c) 2007 Mauro Carvalho Chehab, <mchehab@kernel.org> + * + * Highly based on video-buf written originally by: + * (c) 2001,02 Gerd Knorr <kraxel@bytesex.org> + * (c) 2006 Mauro Carvalho Chehab, <mchehab@kernel.org> + * (c) 2006 Ted Walther and John Sokol + */ +#ifndef _VIDEOBUF_DMA_SG_H +#define _VIDEOBUF_DMA_SG_H + +#include <media/videobuf-core.h> + +/* --------------------------------------------------------------------- */ + +/* + * A small set of helper functions to manage buffers (both userland + * and kernel) for DMA. + * + * videobuf_dma_init_*() + * creates a buffer. The userland version takes a userspace + * pointer + length. The kernel version just wants the size and + * does memory allocation too using vmalloc_32(). + * + * videobuf_dma_*() + * see Documentation/core-api/dma-api-howto.rst, these functions to + * basically the same. The map function does also build a + * scatterlist for the buffer (and unmap frees it ...) + * + * videobuf_dma_free() + * no comment ... + * + */ + +struct videobuf_dmabuf { + u32 magic; + + /* for userland buffer */ + int offset; + size_t size; + struct page **pages; + + /* for kernel buffers */ + void *vaddr; + struct page **vaddr_pages; + dma_addr_t *dma_addr; + struct device *dev; + + /* for overlay buffers (pci-pci dma) */ + dma_addr_t bus_addr; + + /* common */ + struct scatterlist *sglist; + int sglen; + unsigned long nr_pages; + int direction; +}; + +struct videobuf_dma_sg_memory { + u32 magic; + + /* for mmap'ed buffers */ + struct videobuf_dmabuf dma; +}; + +/* + * Scatter-gather DMA buffer API. + * + * These functions provide a simple way to create a page list and a + * scatter-gather list from a kernel, userspace of physical address and map the + * memory for DMA operation. + * + * Despite the name, this is totally unrelated to videobuf, except that + * videobuf-dma-sg uses the same API internally. + */ +int videobuf_dma_free(struct videobuf_dmabuf *dma); + +int videobuf_dma_unmap(struct device *dev, struct videobuf_dmabuf *dma); +struct videobuf_dmabuf *videobuf_to_dma(struct videobuf_buffer *buf); + +void *videobuf_sg_alloc(size_t size); + +void videobuf_queue_sg_init(struct videobuf_queue *q, + const struct videobuf_queue_ops *ops, + struct device *dev, + spinlock_t *irqlock, + enum v4l2_buf_type type, + enum v4l2_field field, + unsigned int msize, + void *priv, + struct mutex *ext_lock); + +#endif /* _VIDEOBUF_DMA_SG_H */ + diff --git a/include/media/videobuf-vmalloc.h b/include/media/videobuf-vmalloc.h new file mode 100644 index 000000000..e930dbb9d --- /dev/null +++ b/include/media/videobuf-vmalloc.h @@ -0,0 +1,43 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * helper functions for vmalloc capture buffers + * + * The functions expect the hardware being able to scatter gather + * (i.e. the buffers are not linear in physical memory, but fragmented + * into PAGE_SIZE chunks). They also assume the driver does not need + * to touch the video data. + * + * (c) 2007 Mauro Carvalho Chehab, <mchehab@kernel.org> + */ +#ifndef _VIDEOBUF_VMALLOC_H +#define _VIDEOBUF_VMALLOC_H + +#include <media/videobuf-core.h> + +/* --------------------------------------------------------------------- */ + +struct videobuf_vmalloc_memory { + u32 magic; + + void *vaddr; + + /* remap_vmalloc_range seems to need to run + * after mmap() on some cases */ + struct vm_area_struct *vma; +}; + +void videobuf_queue_vmalloc_init(struct videobuf_queue *q, + const struct videobuf_queue_ops *ops, + struct device *dev, + spinlock_t *irqlock, + enum v4l2_buf_type type, + enum v4l2_field field, + unsigned int msize, + void *priv, + struct mutex *ext_lock); + +void *videobuf_to_vmalloc(struct videobuf_buffer *buf); + +void videobuf_vmalloc_free(struct videobuf_buffer *buf); + +#endif diff --git a/include/media/videobuf2-core.h b/include/media/videobuf2-core.h new file mode 100644 index 000000000..bbb3f26fb --- /dev/null +++ b/include/media/videobuf2-core.h @@ -0,0 +1,1257 @@ +/* + * videobuf2-core.h - Video Buffer 2 Core Framework + * + * Copyright (C) 2010 Samsung Electronics + * + * Author: Pawel Osciak <pawel@osciak.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation. + */ +#ifndef _MEDIA_VIDEOBUF2_CORE_H +#define _MEDIA_VIDEOBUF2_CORE_H + +#include <linux/mm_types.h> +#include <linux/mutex.h> +#include <linux/poll.h> +#include <linux/dma-buf.h> +#include <linux/bitops.h> +#include <media/media-request.h> + +#define VB2_MAX_FRAME (32) +#define VB2_MAX_PLANES (8) + +/** + * enum vb2_memory - type of memory model used to make the buffers visible + * on userspace. + * + * @VB2_MEMORY_UNKNOWN: Buffer status is unknown or it is not used yet on + * userspace. + * @VB2_MEMORY_MMAP: The buffers are allocated by the Kernel and it is + * memory mapped via mmap() ioctl. This model is + * also used when the user is using the buffers via + * read() or write() system calls. + * @VB2_MEMORY_USERPTR: The buffers was allocated in userspace and it is + * memory mapped via mmap() ioctl. + * @VB2_MEMORY_DMABUF: The buffers are passed to userspace via DMA buffer. + */ +enum vb2_memory { + VB2_MEMORY_UNKNOWN = 0, + VB2_MEMORY_MMAP = 1, + VB2_MEMORY_USERPTR = 2, + VB2_MEMORY_DMABUF = 4, +}; + +struct vb2_fileio_data; +struct vb2_threadio_data; + +/** + * struct vb2_mem_ops - memory handling/memory allocator operations. + * @alloc: allocate video memory and, optionally, allocator private data, + * return ERR_PTR() on failure or a pointer to allocator private, + * per-buffer data on success; the returned private structure + * will then be passed as @buf_priv argument to other ops in this + * structure. Additional gfp_flags to use when allocating the + * are also passed to this operation. These flags are from the + * gfp_flags field of vb2_queue. The size argument to this function + * shall be *page aligned*. + * @put: inform the allocator that the buffer will no longer be used; + * usually will result in the allocator freeing the buffer (if + * no other users of this buffer are present); the @buf_priv + * argument is the allocator private per-buffer structure + * previously returned from the alloc callback. + * @get_dmabuf: acquire userspace memory for a hardware operation; used for + * DMABUF memory types. + * @get_userptr: acquire userspace memory for a hardware operation; used for + * USERPTR memory types; vaddr is the address passed to the + * videobuf layer when queuing a video buffer of USERPTR type; + * should return an allocator private per-buffer structure + * associated with the buffer on success, ERR_PTR() on failure; + * the returned private structure will then be passed as @buf_priv + * argument to other ops in this structure. + * @put_userptr: inform the allocator that a USERPTR buffer will no longer + * be used. + * @attach_dmabuf: attach a shared &struct dma_buf for a hardware operation; + * used for DMABUF memory types; dev is the alloc device + * dbuf is the shared dma_buf; returns ERR_PTR() on failure; + * allocator private per-buffer structure on success; + * this needs to be used for further accesses to the buffer. + * @detach_dmabuf: inform the exporter of the buffer that the current DMABUF + * buffer is no longer used; the @buf_priv argument is the + * allocator private per-buffer structure previously returned + * from the attach_dmabuf callback. + * @map_dmabuf: request for access to the dmabuf from allocator; the allocator + * of dmabuf is informed that this driver is going to use the + * dmabuf. + * @unmap_dmabuf: releases access control to the dmabuf - allocator is notified + * that this driver is done using the dmabuf for now. + * @prepare: called every time the buffer is passed from userspace to the + * driver, useful for cache synchronisation, optional. + * @finish: called every time the buffer is passed back from the driver + * to the userspace, also optional. + * @vaddr: return a kernel virtual address to a given memory buffer + * associated with the passed private structure or NULL if no + * such mapping exists. + * @cookie: return allocator specific cookie for a given memory buffer + * associated with the passed private structure or NULL if not + * available. + * @num_users: return the current number of users of a memory buffer; + * return 1 if the videobuf layer (or actually the driver using + * it) is the only user. + * @mmap: setup a userspace mapping for a given memory buffer under + * the provided virtual memory region. + * + * Those operations are used by the videobuf2 core to implement the memory + * handling/memory allocators for each type of supported streaming I/O method. + * + * .. note:: + * #) Required ops for USERPTR types: get_userptr, put_userptr. + * + * #) Required ops for MMAP types: alloc, put, num_users, mmap. + * + * #) Required ops for read/write access types: alloc, put, num_users, vaddr. + * + * #) Required ops for DMABUF types: attach_dmabuf, detach_dmabuf, + * map_dmabuf, unmap_dmabuf. + */ +struct vb2_mem_ops { + void *(*alloc)(struct device *dev, unsigned long attrs, + unsigned long size, + enum dma_data_direction dma_dir, + gfp_t gfp_flags); + void (*put)(void *buf_priv); + struct dma_buf *(*get_dmabuf)(void *buf_priv, unsigned long flags); + + void *(*get_userptr)(struct device *dev, unsigned long vaddr, + unsigned long size, + enum dma_data_direction dma_dir); + void (*put_userptr)(void *buf_priv); + + void (*prepare)(void *buf_priv); + void (*finish)(void *buf_priv); + + void *(*attach_dmabuf)(struct device *dev, + struct dma_buf *dbuf, + unsigned long size, + enum dma_data_direction dma_dir); + void (*detach_dmabuf)(void *buf_priv); + int (*map_dmabuf)(void *buf_priv); + void (*unmap_dmabuf)(void *buf_priv); + + void *(*vaddr)(void *buf_priv); + void *(*cookie)(void *buf_priv); + + unsigned int (*num_users)(void *buf_priv); + + int (*mmap)(void *buf_priv, struct vm_area_struct *vma); +}; + +/** + * struct vb2_plane - plane information. + * @mem_priv: private data with this plane. + * @dbuf: dma_buf - shared buffer object. + * @dbuf_mapped: flag to show whether dbuf is mapped or not + * @bytesused: number of bytes occupied by data in the plane (payload). + * @length: size of this plane (NOT the payload) in bytes. + * @min_length: minimum required size of this plane (NOT the payload) in bytes. + * @length is always greater or equal to @min_length. + * @m: Union with memtype-specific data. + * @m.offset: when memory in the associated struct vb2_buffer is + * %VB2_MEMORY_MMAP, equals the offset from the start of + * the device memory for this plane (or is a "cookie" that + * should be passed to mmap() called on the video node). + * @m.userptr: when memory is %VB2_MEMORY_USERPTR, a userspace pointer + * pointing to this plane. + * @m.fd: when memory is %VB2_MEMORY_DMABUF, a userspace file + * descriptor associated with this plane. + * @data_offset: offset in the plane to the start of data; usually 0, + * unless there is a header in front of the data. + * + * Should contain enough information to be able to cover all the fields + * of &struct v4l2_plane at videodev2.h. + */ +struct vb2_plane { + void *mem_priv; + struct dma_buf *dbuf; + unsigned int dbuf_mapped; + unsigned int bytesused; + unsigned int length; + unsigned int min_length; + union { + unsigned int offset; + unsigned long userptr; + int fd; + } m; + unsigned int data_offset; +}; + +/** + * enum vb2_io_modes - queue access methods. + * @VB2_MMAP: driver supports MMAP with streaming API. + * @VB2_USERPTR: driver supports USERPTR with streaming API. + * @VB2_READ: driver supports read() style access. + * @VB2_WRITE: driver supports write() style access. + * @VB2_DMABUF: driver supports DMABUF with streaming API. + */ +enum vb2_io_modes { + VB2_MMAP = BIT(0), + VB2_USERPTR = BIT(1), + VB2_READ = BIT(2), + VB2_WRITE = BIT(3), + VB2_DMABUF = BIT(4), +}; + +/** + * enum vb2_buffer_state - current video buffer state. + * @VB2_BUF_STATE_DEQUEUED: buffer under userspace control. + * @VB2_BUF_STATE_IN_REQUEST: buffer is queued in media request. + * @VB2_BUF_STATE_PREPARING: buffer is being prepared in videobuf. + * @VB2_BUF_STATE_QUEUED: buffer queued in videobuf, but not in driver. + * @VB2_BUF_STATE_ACTIVE: buffer queued in driver and possibly used + * in a hardware operation. + * @VB2_BUF_STATE_DONE: buffer returned from driver to videobuf, but + * not yet dequeued to userspace. + * @VB2_BUF_STATE_ERROR: same as above, but the operation on the buffer + * has ended with an error, which will be reported + * to the userspace when it is dequeued. + */ +enum vb2_buffer_state { + VB2_BUF_STATE_DEQUEUED, + VB2_BUF_STATE_IN_REQUEST, + VB2_BUF_STATE_PREPARING, + VB2_BUF_STATE_QUEUED, + VB2_BUF_STATE_ACTIVE, + VB2_BUF_STATE_DONE, + VB2_BUF_STATE_ERROR, +}; + +struct vb2_queue; + +/** + * struct vb2_buffer - represents a video buffer. + * @vb2_queue: pointer to &struct vb2_queue with the queue to + * which this driver belongs. + * @index: id number of the buffer. + * @type: buffer type. + * @memory: the method, in which the actual data is passed. + * @num_planes: number of planes in the buffer + * on an internal driver queue. + * @timestamp: frame timestamp in ns. + * @request: the request this buffer is associated with. + * @req_obj: used to bind this buffer to a request. This + * request object has a refcount. + */ +struct vb2_buffer { + struct vb2_queue *vb2_queue; + unsigned int index; + unsigned int type; + unsigned int memory; + unsigned int num_planes; + u64 timestamp; + struct media_request *request; + struct media_request_object req_obj; + + /* private: internal use only + * + * state: current buffer state; do not change + * synced: this buffer has been synced for DMA, i.e. the + * 'prepare' memop was called. It is cleared again + * after the 'finish' memop is called. + * prepared: this buffer has been prepared, i.e. the + * buf_prepare op was called. It is cleared again + * after the 'buf_finish' op is called. + * copied_timestamp: the timestamp of this capture buffer was copied + * from an output buffer. + * need_cache_sync_on_prepare: when set buffer's ->prepare() function + * performs cache sync/invalidation. + * need_cache_sync_on_finish: when set buffer's ->finish() function + * performs cache sync/invalidation. + * queued_entry: entry on the queued buffers list, which holds + * all buffers queued from userspace + * done_entry: entry on the list that stores all buffers ready + * to be dequeued to userspace + * vb2_plane: per-plane information; do not change + */ + enum vb2_buffer_state state; + unsigned int synced:1; + unsigned int prepared:1; + unsigned int copied_timestamp:1; + unsigned int need_cache_sync_on_prepare:1; + unsigned int need_cache_sync_on_finish:1; + + struct vb2_plane planes[VB2_MAX_PLANES]; + struct list_head queued_entry; + struct list_head done_entry; +#ifdef CONFIG_VIDEO_ADV_DEBUG + /* + * Counters for how often these buffer-related ops are + * called. Used to check for unbalanced ops. + */ + u32 cnt_mem_alloc; + u32 cnt_mem_put; + u32 cnt_mem_get_dmabuf; + u32 cnt_mem_get_userptr; + u32 cnt_mem_put_userptr; + u32 cnt_mem_prepare; + u32 cnt_mem_finish; + u32 cnt_mem_attach_dmabuf; + u32 cnt_mem_detach_dmabuf; + u32 cnt_mem_map_dmabuf; + u32 cnt_mem_unmap_dmabuf; + u32 cnt_mem_vaddr; + u32 cnt_mem_cookie; + u32 cnt_mem_num_users; + u32 cnt_mem_mmap; + + u32 cnt_buf_out_validate; + u32 cnt_buf_init; + u32 cnt_buf_prepare; + u32 cnt_buf_finish; + u32 cnt_buf_cleanup; + u32 cnt_buf_queue; + u32 cnt_buf_request_complete; + + /* This counts the number of calls to vb2_buffer_done() */ + u32 cnt_buf_done; +#endif +}; + +/** + * struct vb2_ops - driver-specific callbacks. + * + * These operations are not called from interrupt context except where + * mentioned specifically. + * + * @queue_setup: called from VIDIOC_REQBUFS() and VIDIOC_CREATE_BUFS() + * handlers before memory allocation. It can be called + * twice: if the original number of requested buffers + * could not be allocated, then it will be called a + * second time with the actually allocated number of + * buffers to verify if that is OK. + * The driver should return the required number of buffers + * in \*num_buffers, the required number of planes per + * buffer in \*num_planes, the size of each plane should be + * set in the sizes\[\] array and optional per-plane + * allocator specific device in the alloc_devs\[\] array. + * When called from VIDIOC_REQBUFS(), \*num_planes == 0, + * the driver has to use the currently configured format to + * determine the plane sizes and \*num_buffers is the total + * number of buffers that are being allocated. When called + * from VIDIOC_CREATE_BUFS(), \*num_planes != 0 and it + * describes the requested number of planes and sizes\[\] + * contains the requested plane sizes. In this case + * \*num_buffers are being allocated additionally to + * q->num_buffers. If either \*num_planes or the requested + * sizes are invalid callback must return %-EINVAL. + * @wait_prepare: release any locks taken while calling vb2 functions; + * it is called before an ioctl needs to wait for a new + * buffer to arrive; required to avoid a deadlock in + * blocking access type. + * @wait_finish: reacquire all locks released in the previous callback; + * required to continue operation after sleeping while + * waiting for a new buffer to arrive. + * @buf_out_validate: called when the output buffer is prepared or queued + * to a request; drivers can use this to validate + * userspace-provided information; this is required only + * for OUTPUT queues. + * @buf_init: called once after allocating a buffer (in MMAP case) + * or after acquiring a new USERPTR buffer; drivers may + * perform additional buffer-related initialization; + * initialization failure (return != 0) will prevent + * queue setup from completing successfully; optional. + * @buf_prepare: called every time the buffer is queued from userspace + * and from the VIDIOC_PREPARE_BUF() ioctl; drivers may + * perform any initialization required before each + * hardware operation in this callback; drivers can + * access/modify the buffer here as it is still synced for + * the CPU; drivers that support VIDIOC_CREATE_BUFS() must + * also validate the buffer size; if an error is returned, + * the buffer will not be queued in driver; optional. + * @buf_finish: called before every dequeue of the buffer back to + * userspace; the buffer is synced for the CPU, so drivers + * can access/modify the buffer contents; drivers may + * perform any operations required before userspace + * accesses the buffer; optional. The buffer state can be + * one of the following: %DONE and %ERROR occur while + * streaming is in progress, and the %PREPARED state occurs + * when the queue has been canceled and all pending + * buffers are being returned to their default %DEQUEUED + * state. Typically you only have to do something if the + * state is %VB2_BUF_STATE_DONE, since in all other cases + * the buffer contents will be ignored anyway. + * @buf_cleanup: called once before the buffer is freed; drivers may + * perform any additional cleanup; optional. + * @start_streaming: called once to enter 'streaming' state; the driver may + * receive buffers with @buf_queue callback + * before @start_streaming is called; the driver gets the + * number of already queued buffers in count parameter; + * driver can return an error if hardware fails, in that + * case all buffers that have been already given by + * the @buf_queue callback are to be returned by the driver + * by calling vb2_buffer_done() with %VB2_BUF_STATE_QUEUED. + * If you need a minimum number of buffers before you can + * start streaming, then set + * &vb2_queue->min_buffers_needed. If that is non-zero + * then @start_streaming won't be called until at least + * that many buffers have been queued up by userspace. + * @stop_streaming: called when 'streaming' state must be disabled; driver + * should stop any DMA transactions or wait until they + * finish and give back all buffers it got from &buf_queue + * callback by calling vb2_buffer_done() with either + * %VB2_BUF_STATE_DONE or %VB2_BUF_STATE_ERROR; may use + * vb2_wait_for_all_buffers() function + * @buf_queue: passes buffer vb to the driver; driver may start + * hardware operation on this buffer; driver should give + * the buffer back by calling vb2_buffer_done() function; + * it is always called after calling VIDIOC_STREAMON() + * ioctl; might be called before @start_streaming callback + * if user pre-queued buffers before calling + * VIDIOC_STREAMON(). + * @buf_request_complete: a buffer that was never queued to the driver but is + * associated with a queued request was canceled. + * The driver will have to mark associated objects in the + * request as completed; required if requests are + * supported. + */ +struct vb2_ops { + int (*queue_setup)(struct vb2_queue *q, + unsigned int *num_buffers, unsigned int *num_planes, + unsigned int sizes[], struct device *alloc_devs[]); + + void (*wait_prepare)(struct vb2_queue *q); + void (*wait_finish)(struct vb2_queue *q); + + int (*buf_out_validate)(struct vb2_buffer *vb); + int (*buf_init)(struct vb2_buffer *vb); + int (*buf_prepare)(struct vb2_buffer *vb); + void (*buf_finish)(struct vb2_buffer *vb); + void (*buf_cleanup)(struct vb2_buffer *vb); + + int (*start_streaming)(struct vb2_queue *q, unsigned int count); + void (*stop_streaming)(struct vb2_queue *q); + + void (*buf_queue)(struct vb2_buffer *vb); + + void (*buf_request_complete)(struct vb2_buffer *vb); +}; + +/** + * struct vb2_buf_ops - driver-specific callbacks. + * + * @verify_planes_array: Verify that a given user space structure contains + * enough planes for the buffer. This is called + * for each dequeued buffer. + * @init_buffer: given a &vb2_buffer initialize the extra data after + * struct vb2_buffer. + * For V4L2 this is a &struct vb2_v4l2_buffer. + * @fill_user_buffer: given a &vb2_buffer fill in the userspace structure. + * For V4L2 this is a &struct v4l2_buffer. + * @fill_vb2_buffer: given a userspace structure, fill in the &vb2_buffer. + * If the userspace structure is invalid, then this op + * will return an error. + * @copy_timestamp: copy the timestamp from a userspace structure to + * the &struct vb2_buffer. + */ +struct vb2_buf_ops { + int (*verify_planes_array)(struct vb2_buffer *vb, const void *pb); + void (*init_buffer)(struct vb2_buffer *vb); + void (*fill_user_buffer)(struct vb2_buffer *vb, void *pb); + int (*fill_vb2_buffer)(struct vb2_buffer *vb, struct vb2_plane *planes); + void (*copy_timestamp)(struct vb2_buffer *vb, const void *pb); +}; + +/** + * struct vb2_queue - a videobuf queue. + * + * @type: private buffer type whose content is defined by the vb2-core + * caller. For example, for V4L2, it should match + * the types defined on &enum v4l2_buf_type. + * @io_modes: supported io methods (see &enum vb2_io_modes). + * @alloc_devs: &struct device memory type/allocator-specific per-plane device + * @dev: device to use for the default allocation context if the driver + * doesn't fill in the @alloc_devs array. + * @dma_attrs: DMA attributes to use for the DMA. + * @bidirectional: when this flag is set the DMA direction for the buffers of + * this queue will be overridden with %DMA_BIDIRECTIONAL direction. + * This is useful in cases where the hardware (firmware) writes to + * a buffer which is mapped as read (%DMA_TO_DEVICE), or reads from + * buffer which is mapped for write (%DMA_FROM_DEVICE) in order + * to satisfy some internal hardware restrictions or adds a padding + * needed by the processing algorithm. In case the DMA mapping is + * not bidirectional but the hardware (firmware) trying to access + * the buffer (in the opposite direction) this could lead to an + * IOMMU protection faults. + * @fileio_read_once: report EOF after reading the first buffer + * @fileio_write_immediately: queue buffer after each write() call + * @allow_zero_bytesused: allow bytesused == 0 to be passed to the driver + * @quirk_poll_must_check_waiting_for_buffers: Return %EPOLLERR at poll when QBUF + * has not been called. This is a vb1 idiom that has been adopted + * also by vb2. + * @supports_requests: this queue supports the Request API. + * @requires_requests: this queue requires the Request API. If this is set to 1, + * then supports_requests must be set to 1 as well. + * @uses_qbuf: qbuf was used directly for this queue. Set to 1 the first + * time this is called. Set to 0 when the queue is canceled. + * If this is 1, then you cannot queue buffers from a request. + * @uses_requests: requests are used for this queue. Set to 1 the first time + * a request is queued. Set to 0 when the queue is canceled. + * If this is 1, then you cannot queue buffers directly. + * @allow_cache_hints: when set user-space can pass cache management hints in + * order to skip cache flush/invalidation on ->prepare() or/and + * ->finish(). + * @lock: pointer to a mutex that protects the &struct vb2_queue. The + * driver can set this to a mutex to let the v4l2 core serialize + * the queuing ioctls. If the driver wants to handle locking + * itself, then this should be set to NULL. This lock is not used + * by the videobuf2 core API. + * @owner: The filehandle that 'owns' the buffers, i.e. the filehandle + * that called reqbufs, create_buffers or started fileio. + * This field is not used by the videobuf2 core API, but it allows + * drivers to easily associate an owner filehandle with the queue. + * @ops: driver-specific callbacks + * @mem_ops: memory allocator specific callbacks + * @buf_ops: callbacks to deliver buffer information. + * between user-space and kernel-space. + * @drv_priv: driver private data. + * @subsystem_flags: Flags specific to the subsystem (V4L2/DVB/etc.). Not used + * by the vb2 core. + * @buf_struct_size: size of the driver-specific buffer structure; + * "0" indicates the driver doesn't want to use a custom buffer + * structure type. In that case a subsystem-specific struct + * will be used (in the case of V4L2 that is + * ``sizeof(struct vb2_v4l2_buffer)``). The first field of the + * driver-specific buffer structure must be the subsystem-specific + * struct (vb2_v4l2_buffer in the case of V4L2). + * @timestamp_flags: Timestamp flags; ``V4L2_BUF_FLAG_TIMESTAMP_*`` and + * ``V4L2_BUF_FLAG_TSTAMP_SRC_*`` + * @gfp_flags: additional gfp flags used when allocating the buffers. + * Typically this is 0, but it may be e.g. %GFP_DMA or %__GFP_DMA32 + * to force the buffer allocation to a specific memory zone. + * @min_buffers_needed: the minimum number of buffers needed before + * @start_streaming can be called. Used when a DMA engine + * cannot be started unless at least this number of buffers + * have been queued into the driver. + */ +/* + * Private elements (won't appear at the uAPI book): + * @mmap_lock: private mutex used when buffers are allocated/freed/mmapped + * @memory: current memory type used + * @dma_dir: DMA mapping direction. + * @bufs: videobuf buffer structures + * @num_buffers: number of allocated/used buffers + * @queued_list: list of buffers currently queued from userspace + * @queued_count: number of buffers queued and ready for streaming. + * @owned_by_drv_count: number of buffers owned by the driver + * @done_list: list of buffers ready to be dequeued to userspace + * @done_lock: lock to protect done_list list + * @done_wq: waitqueue for processes waiting for buffers ready to be dequeued + * @streaming: current streaming state + * @start_streaming_called: @start_streaming was called successfully and we + * started streaming. + * @error: a fatal error occurred on the queue + * @waiting_for_buffers: used in poll() to check if vb2 is still waiting for + * buffers. Only set for capture queues if qbuf has not yet been + * called since poll() needs to return %EPOLLERR in that situation. + * @is_multiplanar: set if buffer type is multiplanar + * @is_output: set if buffer type is output + * @copy_timestamp: set if vb2-core should set timestamps + * @last_buffer_dequeued: used in poll() and DQBUF to immediately return if the + * last decoded buffer was already dequeued. Set for capture queues + * when a buffer with the %V4L2_BUF_FLAG_LAST is dequeued. + * @fileio: file io emulator internal data, used only if emulator is active + * @threadio: thread io internal data, used only if thread is active + * @name: queue name, used for logging purpose. Initialized automatically + * if left empty by drivers. + */ +struct vb2_queue { + unsigned int type; + unsigned int io_modes; + struct device *dev; + unsigned long dma_attrs; + unsigned int bidirectional:1; + unsigned int fileio_read_once:1; + unsigned int fileio_write_immediately:1; + unsigned int allow_zero_bytesused:1; + unsigned int quirk_poll_must_check_waiting_for_buffers:1; + unsigned int supports_requests:1; + unsigned int requires_requests:1; + unsigned int uses_qbuf:1; + unsigned int uses_requests:1; + unsigned int allow_cache_hints:1; + + struct mutex *lock; + void *owner; + + const struct vb2_ops *ops; + const struct vb2_mem_ops *mem_ops; + const struct vb2_buf_ops *buf_ops; + + void *drv_priv; + u32 subsystem_flags; + unsigned int buf_struct_size; + u32 timestamp_flags; + gfp_t gfp_flags; + u32 min_buffers_needed; + + struct device *alloc_devs[VB2_MAX_PLANES]; + + /* private: internal use only */ + struct mutex mmap_lock; + unsigned int memory; + enum dma_data_direction dma_dir; + struct vb2_buffer *bufs[VB2_MAX_FRAME]; + unsigned int num_buffers; + + struct list_head queued_list; + unsigned int queued_count; + + atomic_t owned_by_drv_count; + struct list_head done_list; + spinlock_t done_lock; + wait_queue_head_t done_wq; + + unsigned int streaming:1; + unsigned int start_streaming_called:1; + unsigned int error:1; + unsigned int waiting_for_buffers:1; + unsigned int waiting_in_dqbuf:1; + unsigned int is_multiplanar:1; + unsigned int is_output:1; + unsigned int copy_timestamp:1; + unsigned int last_buffer_dequeued:1; + + struct vb2_fileio_data *fileio; + struct vb2_threadio_data *threadio; + + char name[32]; + +#ifdef CONFIG_VIDEO_ADV_DEBUG + /* + * Counters for how often these queue-related ops are + * called. Used to check for unbalanced ops. + */ + u32 cnt_queue_setup; + u32 cnt_wait_prepare; + u32 cnt_wait_finish; + u32 cnt_start_streaming; + u32 cnt_stop_streaming; +#endif +}; + +/** + * vb2_queue_allows_cache_hints() - Return true if the queue allows cache + * and memory consistency hints. + * + * @q: pointer to &struct vb2_queue with videobuf2 queue + */ +static inline bool vb2_queue_allows_cache_hints(struct vb2_queue *q) +{ + return q->allow_cache_hints && q->memory == VB2_MEMORY_MMAP; +} + +/** + * vb2_plane_vaddr() - Return a kernel virtual address of a given plane. + * @vb: pointer to &struct vb2_buffer to which the plane in + * question belongs to. + * @plane_no: plane number for which the address is to be returned. + * + * This function returns a kernel virtual address of a given plane if + * such a mapping exist, NULL otherwise. + */ +void *vb2_plane_vaddr(struct vb2_buffer *vb, unsigned int plane_no); + +/** + * vb2_plane_cookie() - Return allocator specific cookie for the given plane. + * @vb: pointer to &struct vb2_buffer to which the plane in + * question belongs to. + * @plane_no: plane number for which the cookie is to be returned. + * + * This function returns an allocator specific cookie for a given plane if + * available, NULL otherwise. The allocator should provide some simple static + * inline function, which would convert this cookie to the allocator specific + * type that can be used directly by the driver to access the buffer. This can + * be for example physical address, pointer to scatter list or IOMMU mapping. + */ +void *vb2_plane_cookie(struct vb2_buffer *vb, unsigned int plane_no); + +/** + * vb2_buffer_done() - inform videobuf that an operation on a buffer + * is finished. + * @vb: pointer to &struct vb2_buffer to be used. + * @state: state of the buffer, as defined by &enum vb2_buffer_state. + * Either %VB2_BUF_STATE_DONE if the operation finished + * successfully, %VB2_BUF_STATE_ERROR if the operation finished + * with an error or %VB2_BUF_STATE_QUEUED. + * + * This function should be called by the driver after a hardware operation on + * a buffer is finished and the buffer may be returned to userspace. The driver + * cannot use this buffer anymore until it is queued back to it by videobuf + * by the means of &vb2_ops->buf_queue callback. Only buffers previously queued + * to the driver by &vb2_ops->buf_queue can be passed to this function. + * + * While streaming a buffer can only be returned in state DONE or ERROR. + * The &vb2_ops->start_streaming op can also return them in case the DMA engine + * cannot be started for some reason. In that case the buffers should be + * returned with state QUEUED to put them back into the queue. + */ +void vb2_buffer_done(struct vb2_buffer *vb, enum vb2_buffer_state state); + +/** + * vb2_discard_done() - discard all buffers marked as DONE. + * @q: pointer to &struct vb2_queue with videobuf2 queue. + * + * This function is intended to be used with suspend/resume operations. It + * discards all 'done' buffers as they would be too old to be requested after + * resume. + * + * Drivers must stop the hardware and synchronize with interrupt handlers and/or + * delayed works before calling this function to make sure no buffer will be + * touched by the driver and/or hardware. + */ +void vb2_discard_done(struct vb2_queue *q); + +/** + * vb2_wait_for_all_buffers() - wait until all buffers are given back to vb2. + * @q: pointer to &struct vb2_queue with videobuf2 queue. + * + * This function will wait until all buffers that have been given to the driver + * by &vb2_ops->buf_queue are given back to vb2 with vb2_buffer_done(). It + * doesn't call &vb2_ops->wait_prepare/&vb2_ops->wait_finish pair. + * It is intended to be called with all locks taken, for example from + * &vb2_ops->stop_streaming callback. + */ +int vb2_wait_for_all_buffers(struct vb2_queue *q); + +/** + * vb2_core_querybuf() - query video buffer information. + * @q: pointer to &struct vb2_queue with videobuf2 queue. + * @index: id number of the buffer. + * @pb: buffer struct passed from userspace. + * + * Videobuf2 core helper to implement VIDIOC_QUERYBUF() operation. It is called + * internally by VB2 by an API-specific handler, like ``videobuf2-v4l2.h``. + * + * The passed buffer should have been verified. + * + * This function fills the relevant information for the userspace. + * + * Return: returns zero on success; an error code otherwise. + */ +void vb2_core_querybuf(struct vb2_queue *q, unsigned int index, void *pb); + +/** + * vb2_core_reqbufs() - Initiate streaming. + * @q: pointer to &struct vb2_queue with videobuf2 queue. + * @memory: memory type, as defined by &enum vb2_memory. + * @count: requested buffer count. + * + * Videobuf2 core helper to implement VIDIOC_REQBUF() operation. It is called + * internally by VB2 by an API-specific handler, like ``videobuf2-v4l2.h``. + * + * This function: + * + * #) verifies streaming parameters passed from the userspace; + * #) sets up the queue; + * #) negotiates number of buffers and planes per buffer with the driver + * to be used during streaming; + * #) allocates internal buffer structures (&struct vb2_buffer), according to + * the agreed parameters; + * #) for MMAP memory type, allocates actual video memory, using the + * memory handling/allocation routines provided during queue initialization. + * + * If req->count is 0, all the memory will be freed instead. + * + * If the queue has been allocated previously by a previous vb2_core_reqbufs() + * call and the queue is not busy, memory will be reallocated. + * + * Return: returns zero on success; an error code otherwise. + */ +int vb2_core_reqbufs(struct vb2_queue *q, enum vb2_memory memory, + unsigned int *count); + +/** + * vb2_core_create_bufs() - Allocate buffers and any required auxiliary structs + * @q: pointer to &struct vb2_queue with videobuf2 queue. + * @memory: memory type, as defined by &enum vb2_memory. + * @count: requested buffer count. + * @requested_planes: number of planes requested. + * @requested_sizes: array with the size of the planes. + * + * Videobuf2 core helper to implement VIDIOC_CREATE_BUFS() operation. It is + * called internally by VB2 by an API-specific handler, like + * ``videobuf2-v4l2.h``. + * + * This function: + * + * #) verifies parameter sanity; + * #) calls the &vb2_ops->queue_setup queue operation; + * #) performs any necessary memory allocations. + * + * Return: returns zero on success; an error code otherwise. + */ +int vb2_core_create_bufs(struct vb2_queue *q, enum vb2_memory memory, + unsigned int *count, + unsigned int requested_planes, + const unsigned int requested_sizes[]); + +/** + * vb2_core_prepare_buf() - Pass ownership of a buffer from userspace + * to the kernel. + * @q: pointer to &struct vb2_queue with videobuf2 queue. + * @index: id number of the buffer. + * @pb: buffer structure passed from userspace to + * &v4l2_ioctl_ops->vidioc_prepare_buf handler in driver. + * + * Videobuf2 core helper to implement VIDIOC_PREPARE_BUF() operation. It is + * called internally by VB2 by an API-specific handler, like + * ``videobuf2-v4l2.h``. + * + * The passed buffer should have been verified. + * + * This function calls vb2_ops->buf_prepare callback in the driver + * (if provided), in which driver-specific buffer initialization can + * be performed. + * + * Return: returns zero on success; an error code otherwise. + */ +int vb2_core_prepare_buf(struct vb2_queue *q, unsigned int index, void *pb); + +/** + * vb2_core_qbuf() - Queue a buffer from userspace + * + * @q: pointer to &struct vb2_queue with videobuf2 queue. + * @index: id number of the buffer + * @pb: buffer structure passed from userspace to + * v4l2_ioctl_ops->vidioc_qbuf handler in driver + * @req: pointer to &struct media_request, may be NULL. + * + * Videobuf2 core helper to implement VIDIOC_QBUF() operation. It is called + * internally by VB2 by an API-specific handler, like ``videobuf2-v4l2.h``. + * + * This function: + * + * #) If @req is non-NULL, then the buffer will be bound to this + * media request and it returns. The buffer will be prepared and + * queued to the driver (i.e. the next two steps) when the request + * itself is queued. + * #) if necessary, calls &vb2_ops->buf_prepare callback in the driver + * (if provided), in which driver-specific buffer initialization can + * be performed; + * #) if streaming is on, queues the buffer in driver by the means of + * &vb2_ops->buf_queue callback for processing. + * + * Return: returns zero on success; an error code otherwise. + */ +int vb2_core_qbuf(struct vb2_queue *q, unsigned int index, void *pb, + struct media_request *req); + +/** + * vb2_core_dqbuf() - Dequeue a buffer to the userspace + * @q: pointer to &struct vb2_queue with videobuf2 queue + * @pindex: pointer to the buffer index. May be NULL + * @pb: buffer structure passed from userspace to + * v4l2_ioctl_ops->vidioc_dqbuf handler in driver. + * @nonblocking: if true, this call will not sleep waiting for a buffer if no + * buffers ready for dequeuing are present. Normally the driver + * would be passing (file->f_flags & O_NONBLOCK) here. + * + * Videobuf2 core helper to implement VIDIOC_DQBUF() operation. It is called + * internally by VB2 by an API-specific handler, like ``videobuf2-v4l2.h``. + * + * This function: + * + * #) calls buf_finish callback in the driver (if provided), in which + * driver can perform any additional operations that may be required before + * returning the buffer to userspace, such as cache sync, + * #) the buffer struct members are filled with relevant information for + * the userspace. + * + * Return: returns zero on success; an error code otherwise. + */ +int vb2_core_dqbuf(struct vb2_queue *q, unsigned int *pindex, void *pb, + bool nonblocking); + +/** + * vb2_core_streamon() - Implements VB2 stream ON logic + * + * @q: pointer to &struct vb2_queue with videobuf2 queue + * @type: type of the queue to be started. + * For V4L2, this is defined by &enum v4l2_buf_type type. + * + * Videobuf2 core helper to implement VIDIOC_STREAMON() operation. It is called + * internally by VB2 by an API-specific handler, like ``videobuf2-v4l2.h``. + * + * Return: returns zero on success; an error code otherwise. + */ +int vb2_core_streamon(struct vb2_queue *q, unsigned int type); + +/** + * vb2_core_streamoff() - Implements VB2 stream OFF logic + * + * @q: pointer to &struct vb2_queue with videobuf2 queue + * @type: type of the queue to be started. + * For V4L2, this is defined by &enum v4l2_buf_type type. + * + * Videobuf2 core helper to implement VIDIOC_STREAMOFF() operation. It is + * called internally by VB2 by an API-specific handler, like + * ``videobuf2-v4l2.h``. + * + * Return: returns zero on success; an error code otherwise. + */ +int vb2_core_streamoff(struct vb2_queue *q, unsigned int type); + +/** + * vb2_core_expbuf() - Export a buffer as a file descriptor. + * @q: pointer to &struct vb2_queue with videobuf2 queue. + * @fd: pointer to the file descriptor associated with DMABUF + * (set by driver). + * @type: buffer type. + * @index: id number of the buffer. + * @plane: index of the plane to be exported, 0 for single plane queues + * @flags: file flags for newly created file, as defined at + * include/uapi/asm-generic/fcntl.h. + * Currently, the only used flag is %O_CLOEXEC. + * is supported, refer to manual of open syscall for more details. + * + * + * Videobuf2 core helper to implement VIDIOC_EXPBUF() operation. It is called + * internally by VB2 by an API-specific handler, like ``videobuf2-v4l2.h``. + * + * Return: returns zero on success; an error code otherwise. + */ +int vb2_core_expbuf(struct vb2_queue *q, int *fd, unsigned int type, + unsigned int index, unsigned int plane, unsigned int flags); + +/** + * vb2_core_queue_init() - initialize a videobuf2 queue + * @q: pointer to &struct vb2_queue with videobuf2 queue. + * This structure should be allocated in driver + * + * The &vb2_queue structure should be allocated by the driver. The driver is + * responsible of clearing it's content and setting initial values for some + * required entries before calling this function. + * + * .. note:: + * + * The following fields at @q should be set before calling this function: + * &vb2_queue->ops, &vb2_queue->mem_ops, &vb2_queue->type. + */ +int vb2_core_queue_init(struct vb2_queue *q); + +/** + * vb2_core_queue_release() - stop streaming, release the queue and free memory + * @q: pointer to &struct vb2_queue with videobuf2 queue. + * + * This function stops streaming and performs necessary clean ups, including + * freeing video buffer memory. The driver is responsible for freeing + * the &struct vb2_queue itself. + */ +void vb2_core_queue_release(struct vb2_queue *q); + +/** + * vb2_queue_error() - signal a fatal error on the queue + * @q: pointer to &struct vb2_queue with videobuf2 queue. + * + * Flag that a fatal unrecoverable error has occurred and wake up all processes + * waiting on the queue. Polling will now set %EPOLLERR and queuing and dequeuing + * buffers will return %-EIO. + * + * The error flag will be cleared when canceling the queue, either from + * vb2_streamoff() or vb2_queue_release(). Drivers should thus not call this + * function before starting the stream, otherwise the error flag will remain set + * until the queue is released when closing the device node. + */ +void vb2_queue_error(struct vb2_queue *q); + +/** + * vb2_mmap() - map video buffers into application address space. + * @q: pointer to &struct vb2_queue with videobuf2 queue. + * @vma: pointer to &struct vm_area_struct with the vma passed + * to the mmap file operation handler in the driver. + * + * Should be called from mmap file operation handler of a driver. + * This function maps one plane of one of the available video buffers to + * userspace. To map whole video memory allocated on reqbufs, this function + * has to be called once per each plane per each buffer previously allocated. + * + * When the userspace application calls mmap, it passes to it an offset returned + * to it earlier by the means of &v4l2_ioctl_ops->vidioc_querybuf handler. + * That offset acts as a "cookie", which is then used to identify the plane + * to be mapped. + * + * This function finds a plane with a matching offset and a mapping is performed + * by the means of a provided memory operation. + * + * The return values from this function are intended to be directly returned + * from the mmap handler in driver. + */ +int vb2_mmap(struct vb2_queue *q, struct vm_area_struct *vma); + +#ifndef CONFIG_MMU +/** + * vb2_get_unmapped_area - map video buffers into application address space. + * @q: pointer to &struct vb2_queue with videobuf2 queue. + * @addr: memory address. + * @len: buffer size. + * @pgoff: page offset. + * @flags: memory flags. + * + * This function is used in noMMU platforms to propose address mapping + * for a given buffer. It's intended to be used as a handler for the + * &file_operations->get_unmapped_area operation. + * + * This is called by the mmap() syscall routines will call this + * to get a proposed address for the mapping, when ``!CONFIG_MMU``. + */ +unsigned long vb2_get_unmapped_area(struct vb2_queue *q, + unsigned long addr, + unsigned long len, + unsigned long pgoff, + unsigned long flags); +#endif + +/** + * vb2_core_poll() - implements poll syscall() logic. + * @q: pointer to &struct vb2_queue with videobuf2 queue. + * @file: &struct file argument passed to the poll + * file operation handler. + * @wait: &poll_table wait argument passed to the poll + * file operation handler. + * + * This function implements poll file operation handler for a driver. + * For CAPTURE queues, if a buffer is ready to be dequeued, the userspace will + * be informed that the file descriptor of a video device is available for + * reading. + * For OUTPUT queues, if a buffer is ready to be dequeued, the file descriptor + * will be reported as available for writing. + * + * The return values from this function are intended to be directly returned + * from poll handler in driver. + */ +__poll_t vb2_core_poll(struct vb2_queue *q, struct file *file, + poll_table *wait); + +/** + * vb2_read() - implements read() syscall logic. + * @q: pointer to &struct vb2_queue with videobuf2 queue. + * @data: pointed to target userspace buffer + * @count: number of bytes to read + * @ppos: file handle position tracking pointer + * @nonblock: mode selector (1 means blocking calls, 0 means nonblocking) + */ +size_t vb2_read(struct vb2_queue *q, char __user *data, size_t count, + loff_t *ppos, int nonblock); +/** + * vb2_read() - implements write() syscall logic. + * @q: pointer to &struct vb2_queue with videobuf2 queue. + * @data: pointed to target userspace buffer + * @count: number of bytes to write + * @ppos: file handle position tracking pointer + * @nonblock: mode selector (1 means blocking calls, 0 means nonblocking) + */ +size_t vb2_write(struct vb2_queue *q, const char __user *data, size_t count, + loff_t *ppos, int nonblock); + +/** + * typedef vb2_thread_fnc - callback function for use with vb2_thread. + * + * @vb: pointer to struct &vb2_buffer. + * @priv: pointer to a private data. + * + * This is called whenever a buffer is dequeued in the thread. + */ +typedef int (*vb2_thread_fnc)(struct vb2_buffer *vb, void *priv); + +/** + * vb2_thread_start() - start a thread for the given queue. + * @q: pointer to &struct vb2_queue with videobuf2 queue. + * @fnc: &vb2_thread_fnc callback function. + * @priv: priv pointer passed to the callback function. + * @thread_name:the name of the thread. This will be prefixed with "vb2-". + * + * This starts a thread that will queue and dequeue until an error occurs + * or vb2_thread_stop() is called. + * + * .. attention:: + * + * This function should not be used for anything else but the videobuf2-dvb + * support. If you think you have another good use-case for this, then please + * contact the linux-media mailing list first. + */ +int vb2_thread_start(struct vb2_queue *q, vb2_thread_fnc fnc, void *priv, + const char *thread_name); + +/** + * vb2_thread_stop() - stop the thread for the given queue. + * @q: pointer to &struct vb2_queue with videobuf2 queue. + */ +int vb2_thread_stop(struct vb2_queue *q); + +/** + * vb2_is_streaming() - return streaming status of the queue. + * @q: pointer to &struct vb2_queue with videobuf2 queue. + */ +static inline bool vb2_is_streaming(struct vb2_queue *q) +{ + return q->streaming; +} + +/** + * vb2_fileio_is_active() - return true if fileio is active. + * @q: pointer to &struct vb2_queue with videobuf2 queue. + * + * This returns true if read() or write() is used to stream the data + * as opposed to stream I/O. This is almost never an important distinction, + * except in rare cases. One such case is that using read() or write() to + * stream a format using %V4L2_FIELD_ALTERNATE is not allowed since there + * is no way you can pass the field information of each buffer to/from + * userspace. A driver that supports this field format should check for + * this in the &vb2_ops->queue_setup op and reject it if this function returns + * true. + */ +static inline bool vb2_fileio_is_active(struct vb2_queue *q) +{ + return q->fileio; +} + +/** + * vb2_is_busy() - return busy status of the queue. + * @q: pointer to &struct vb2_queue with videobuf2 queue. + * + * This function checks if queue has any buffers allocated. + */ +static inline bool vb2_is_busy(struct vb2_queue *q) +{ + return (q->num_buffers > 0); +} + +/** + * vb2_get_drv_priv() - return driver private data associated with the queue. + * @q: pointer to &struct vb2_queue with videobuf2 queue. + */ +static inline void *vb2_get_drv_priv(struct vb2_queue *q) +{ + return q->drv_priv; +} + +/** + * vb2_set_plane_payload() - set bytesused for the plane @plane_no. + * @vb: pointer to &struct vb2_buffer to which the plane in + * question belongs to. + * @plane_no: plane number for which payload should be set. + * @size: payload in bytes. + */ +static inline void vb2_set_plane_payload(struct vb2_buffer *vb, + unsigned int plane_no, unsigned long size) +{ + if (plane_no < vb->num_planes) + vb->planes[plane_no].bytesused = size; +} + +/** + * vb2_get_plane_payload() - get bytesused for the plane plane_no + * @vb: pointer to &struct vb2_buffer to which the plane in + * question belongs to. + * @plane_no: plane number for which payload should be set. + */ +static inline unsigned long vb2_get_plane_payload(struct vb2_buffer *vb, + unsigned int plane_no) +{ + if (plane_no < vb->num_planes) + return vb->planes[plane_no].bytesused; + return 0; +} + +/** + * vb2_plane_size() - return plane size in bytes. + * @vb: pointer to &struct vb2_buffer to which the plane in + * question belongs to. + * @plane_no: plane number for which size should be returned. + */ +static inline unsigned long +vb2_plane_size(struct vb2_buffer *vb, unsigned int plane_no) +{ + if (plane_no < vb->num_planes) + return vb->planes[plane_no].length; + return 0; +} + +/** + * vb2_start_streaming_called() - return streaming status of driver. + * @q: pointer to &struct vb2_queue with videobuf2 queue. + */ +static inline bool vb2_start_streaming_called(struct vb2_queue *q) +{ + return q->start_streaming_called; +} + +/** + * vb2_clear_last_buffer_dequeued() - clear last buffer dequeued flag of queue. + * @q: pointer to &struct vb2_queue with videobuf2 queue. + */ +static inline void vb2_clear_last_buffer_dequeued(struct vb2_queue *q) +{ + q->last_buffer_dequeued = false; +} + +/** + * vb2_get_buffer() - get a buffer from a queue + * @q: pointer to &struct vb2_queue with videobuf2 queue. + * @index: buffer index + * + * This function obtains a buffer from a queue, by its index. + * Keep in mind that there is no refcounting involved in this + * operation, so the buffer lifetime should be taken into + * consideration. + */ +static inline struct vb2_buffer *vb2_get_buffer(struct vb2_queue *q, + unsigned int index) +{ + if (index < q->num_buffers) + return q->bufs[index]; + return NULL; +} + +/* + * The following functions are not part of the vb2 core API, but are useful + * functions for videobuf2-*. + */ + +/** + * vb2_buffer_in_use() - return true if the buffer is in use and + * the queue cannot be freed (by the means of VIDIOC_REQBUFS(0)) call. + * + * @vb: buffer for which plane size should be returned. + * @q: pointer to &struct vb2_queue with videobuf2 queue. + */ +bool vb2_buffer_in_use(struct vb2_queue *q, struct vb2_buffer *vb); + +/** + * vb2_verify_memory_type() - Check whether the memory type and buffer type + * passed to a buffer operation are compatible with the queue. + * + * @q: pointer to &struct vb2_queue with videobuf2 queue. + * @memory: memory model, as defined by enum &vb2_memory. + * @type: private buffer type whose content is defined by the vb2-core + * caller. For example, for V4L2, it should match + * the types defined on enum &v4l2_buf_type. + */ +int vb2_verify_memory_type(struct vb2_queue *q, + enum vb2_memory memory, unsigned int type); + +/** + * vb2_request_object_is_buffer() - return true if the object is a buffer + * + * @obj: the request object. + */ +bool vb2_request_object_is_buffer(struct media_request_object *obj); + +/** + * vb2_request_buffer_cnt() - return the number of buffers in the request + * + * @req: the request. + */ +unsigned int vb2_request_buffer_cnt(struct media_request *req); + +#endif /* _MEDIA_VIDEOBUF2_CORE_H */ diff --git a/include/media/videobuf2-dma-contig.h b/include/media/videobuf2-dma-contig.h new file mode 100644 index 000000000..5be313cbf --- /dev/null +++ b/include/media/videobuf2-dma-contig.h @@ -0,0 +1,32 @@ +/* + * videobuf2-dma-contig.h - DMA contig memory allocator for videobuf2 + * + * Copyright (C) 2010 Samsung Electronics + * + * Author: Pawel Osciak <pawel@osciak.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation. + */ + +#ifndef _MEDIA_VIDEOBUF2_DMA_CONTIG_H +#define _MEDIA_VIDEOBUF2_DMA_CONTIG_H + +#include <media/videobuf2-v4l2.h> +#include <linux/dma-mapping.h> + +static inline dma_addr_t +vb2_dma_contig_plane_dma_addr(struct vb2_buffer *vb, unsigned int plane_no) +{ + dma_addr_t *addr = vb2_plane_cookie(vb, plane_no); + + return *addr; +} + +int vb2_dma_contig_set_max_seg_size(struct device *dev, unsigned int size); +static inline void vb2_dma_contig_clear_max_seg_size(struct device *dev) { } + +extern const struct vb2_mem_ops vb2_dma_contig_memops; + +#endif diff --git a/include/media/videobuf2-dma-sg.h b/include/media/videobuf2-dma-sg.h new file mode 100644 index 000000000..f28fcb0cf --- /dev/null +++ b/include/media/videobuf2-dma-sg.h @@ -0,0 +1,26 @@ +/* + * videobuf2-dma-sg.h - DMA scatter/gather memory allocator for videobuf2 + * + * Copyright (C) 2010 Samsung Electronics + * + * Author: Andrzej Pietrasiewicz <andrzejtp2010@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation. + */ + +#ifndef _MEDIA_VIDEOBUF2_DMA_SG_H +#define _MEDIA_VIDEOBUF2_DMA_SG_H + +#include <media/videobuf2-v4l2.h> + +static inline struct sg_table *vb2_dma_sg_plane_desc( + struct vb2_buffer *vb, unsigned int plane_no) +{ + return (struct sg_table *)vb2_plane_cookie(vb, plane_no); +} + +extern const struct vb2_mem_ops vb2_dma_sg_memops; + +#endif diff --git a/include/media/videobuf2-dvb.h b/include/media/videobuf2-dvb.h new file mode 100644 index 000000000..8605366ec --- /dev/null +++ b/include/media/videobuf2-dvb.h @@ -0,0 +1,69 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef _VIDEOBUF2_DVB_H_ +#define _VIDEOBUF2_DVB_H_ + +#include <media/dvbdev.h> +#include <media/dmxdev.h> +#include <media/dvb_demux.h> +#include <media/dvb_net.h> +#include <media/dvb_frontend.h> +#include <media/videobuf2-v4l2.h> + +/* We don't actually need to include media-device.h here */ +struct media_device; + +/* + * TODO: This header file should be replaced with videobuf2-core.h + * Currently, vb2_thread is not a stuff of videobuf2-core, + * since vb2_thread has many dependencies on videobuf2-v4l2. + */ + +struct vb2_dvb { + /* filling that the job of the driver */ + char *name; + struct dvb_frontend *frontend; + struct vb2_queue dvbq; + + /* video-buf-dvb state info */ + struct mutex lock; + int nfeeds; + + /* vb2_dvb_(un)register manages this */ + struct dvb_demux demux; + struct dmxdev dmxdev; + struct dmx_frontend fe_hw; + struct dmx_frontend fe_mem; + struct dvb_net net; +}; + +struct vb2_dvb_frontend { + struct list_head felist; + int id; + struct vb2_dvb dvb; +}; + +struct vb2_dvb_frontends { + struct list_head felist; + struct mutex lock; + struct dvb_adapter adapter; + int active_fe_id; /* Indicates which frontend in the felist is in use */ + int gate; /* Frontend with gate control 0=!MFE,1=fe0,2=fe1 etc */ +}; + +int vb2_dvb_register_bus(struct vb2_dvb_frontends *f, + struct module *module, + void *adapter_priv, + struct device *device, + struct media_device *mdev, + short *adapter_nr, + int mfe_shared); + +void vb2_dvb_unregister_bus(struct vb2_dvb_frontends *f); + +struct vb2_dvb_frontend *vb2_dvb_alloc_frontend(struct vb2_dvb_frontends *f, int id); +void vb2_dvb_dealloc_frontends(struct vb2_dvb_frontends *f); + +struct vb2_dvb_frontend *vb2_dvb_get_frontend(struct vb2_dvb_frontends *f, int id); +int vb2_dvb_find_frontend(struct vb2_dvb_frontends *f, struct dvb_frontend *p); + +#endif /* _VIDEOBUF2_DVB_H_ */ diff --git a/include/media/videobuf2-memops.h b/include/media/videobuf2-memops.h new file mode 100644 index 000000000..cd4a46331 --- /dev/null +++ b/include/media/videobuf2-memops.h @@ -0,0 +1,40 @@ +/* + * videobuf2-memops.h - generic memory handling routines for videobuf2 + * + * Copyright (C) 2010 Samsung Electronics + * + * Author: Pawel Osciak <pawel@osciak.com> + * Marek Szyprowski <m.szyprowski@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation. + */ + +#ifndef _MEDIA_VIDEOBUF2_MEMOPS_H +#define _MEDIA_VIDEOBUF2_MEMOPS_H + +#include <media/videobuf2-v4l2.h> +#include <linux/mm.h> +#include <linux/refcount.h> + +/** + * struct vb2_vmarea_handler - common vma refcount tracking handler. + * + * @refcount: pointer to &refcount_t entry in the buffer. + * @put: callback to function that decreases buffer refcount. + * @arg: argument for @put callback. + */ +struct vb2_vmarea_handler { + refcount_t *refcount; + void (*put)(void *arg); + void *arg; +}; + +extern const struct vm_operations_struct vb2_common_vm_ops; + +struct frame_vector *vb2_create_framevec(unsigned long start, + unsigned long length); +void vb2_destroy_framevec(struct frame_vector *vec); + +#endif diff --git a/include/media/videobuf2-v4l2.h b/include/media/videobuf2-v4l2.h new file mode 100644 index 000000000..c203047eb --- /dev/null +++ b/include/media/videobuf2-v4l2.h @@ -0,0 +1,361 @@ +/* + * videobuf2-v4l2.h - V4L2 driver helper framework + * + * Copyright (C) 2010 Samsung Electronics + * + * Author: Pawel Osciak <pawel@osciak.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation. + */ +#ifndef _MEDIA_VIDEOBUF2_V4L2_H +#define _MEDIA_VIDEOBUF2_V4L2_H + +#include <linux/videodev2.h> +#include <media/videobuf2-core.h> + +#if VB2_MAX_FRAME != VIDEO_MAX_FRAME +#error VB2_MAX_FRAME != VIDEO_MAX_FRAME +#endif + +#if VB2_MAX_PLANES != VIDEO_MAX_PLANES +#error VB2_MAX_PLANES != VIDEO_MAX_PLANES +#endif + +struct video_device; + +/** + * struct vb2_v4l2_buffer - video buffer information for v4l2. + * + * @vb2_buf: embedded struct &vb2_buffer. + * @flags: buffer informational flags. + * @field: field order of the image in the buffer, as defined by + * &enum v4l2_field. + * @timecode: frame timecode. + * @sequence: sequence count of this frame. + * @request_fd: the request_fd associated with this buffer + * @is_held: if true, then this capture buffer was held + * @planes: plane information (userptr/fd, length, bytesused, data_offset). + * + * Should contain enough information to be able to cover all the fields + * of &struct v4l2_buffer at ``videodev2.h``. + */ +struct vb2_v4l2_buffer { + struct vb2_buffer vb2_buf; + + __u32 flags; + __u32 field; + struct v4l2_timecode timecode; + __u32 sequence; + __s32 request_fd; + bool is_held; + struct vb2_plane planes[VB2_MAX_PLANES]; +}; + +/* VB2 V4L2 flags as set in vb2_queue.subsystem_flags */ +#define VB2_V4L2_FL_SUPPORTS_M2M_HOLD_CAPTURE_BUF (1 << 0) + +/* + * to_vb2_v4l2_buffer() - cast struct vb2_buffer * to struct vb2_v4l2_buffer * + */ +#define to_vb2_v4l2_buffer(vb) \ + container_of(vb, struct vb2_v4l2_buffer, vb2_buf) + +/** + * vb2_find_timestamp() - Find buffer with given timestamp in the queue + * + * @q: pointer to &struct vb2_queue with videobuf2 queue. + * @timestamp: the timestamp to find. + * @start_idx: the start index (usually 0) in the buffer array to start + * searching from. Note that there may be multiple buffers + * with the same timestamp value, so you can restart the search + * by setting @start_idx to the previously found index + 1. + * + * Returns the buffer index of the buffer with the given @timestamp, or + * -1 if no buffer with @timestamp was found. + */ +int vb2_find_timestamp(const struct vb2_queue *q, u64 timestamp, + unsigned int start_idx); + +int vb2_querybuf(struct vb2_queue *q, struct v4l2_buffer *b); + +/** + * vb2_reqbufs() - Wrapper for vb2_core_reqbufs() that also verifies + * the memory and type values. + * + * @q: pointer to &struct vb2_queue with videobuf2 queue. + * @req: &struct v4l2_requestbuffers passed from userspace to + * &v4l2_ioctl_ops->vidioc_reqbufs handler in driver. + */ +int vb2_reqbufs(struct vb2_queue *q, struct v4l2_requestbuffers *req); + +/** + * vb2_create_bufs() - Wrapper for vb2_core_create_bufs() that also verifies + * the memory and type values. + * + * @q: pointer to &struct vb2_queue with videobuf2 queue. + * @create: creation parameters, passed from userspace to + * &v4l2_ioctl_ops->vidioc_create_bufs handler in driver + */ +int vb2_create_bufs(struct vb2_queue *q, struct v4l2_create_buffers *create); + +/** + * vb2_prepare_buf() - Pass ownership of a buffer from userspace to the kernel + * + * @q: pointer to &struct vb2_queue with videobuf2 queue. + * @mdev: pointer to &struct media_device, may be NULL. + * @b: buffer structure passed from userspace to + * &v4l2_ioctl_ops->vidioc_prepare_buf handler in driver + * + * Should be called from &v4l2_ioctl_ops->vidioc_prepare_buf ioctl handler + * of a driver. + * + * This function: + * + * #) verifies the passed buffer, + * #) calls &vb2_ops->buf_prepare callback in the driver (if provided), + * in which driver-specific buffer initialization can be performed. + * #) if @b->request_fd is non-zero and @mdev->ops->req_queue is set, + * then bind the prepared buffer to the request. + * + * The return values from this function are intended to be directly returned + * from &v4l2_ioctl_ops->vidioc_prepare_buf handler in driver. + */ +int vb2_prepare_buf(struct vb2_queue *q, struct media_device *mdev, + struct v4l2_buffer *b); + +/** + * vb2_qbuf() - Queue a buffer from userspace + * @q: pointer to &struct vb2_queue with videobuf2 queue. + * @mdev: pointer to &struct media_device, may be NULL. + * @b: buffer structure passed from userspace to + * &v4l2_ioctl_ops->vidioc_qbuf handler in driver + * + * Should be called from &v4l2_ioctl_ops->vidioc_qbuf handler of a driver. + * + * This function: + * + * #) verifies the passed buffer; + * #) if @b->request_fd is non-zero and @mdev->ops->req_queue is set, + * then bind the buffer to the request. + * #) if necessary, calls &vb2_ops->buf_prepare callback in the driver + * (if provided), in which driver-specific buffer initialization can + * be performed; + * #) if streaming is on, queues the buffer in driver by the means of + * &vb2_ops->buf_queue callback for processing. + * + * The return values from this function are intended to be directly returned + * from &v4l2_ioctl_ops->vidioc_qbuf handler in driver. + */ +int vb2_qbuf(struct vb2_queue *q, struct media_device *mdev, + struct v4l2_buffer *b); + +/** + * vb2_expbuf() - Export a buffer as a file descriptor + * @q: pointer to &struct vb2_queue with videobuf2 queue. + * @eb: export buffer structure passed from userspace to + * &v4l2_ioctl_ops->vidioc_expbuf handler in driver + * + * The return values from this function are intended to be directly returned + * from &v4l2_ioctl_ops->vidioc_expbuf handler in driver. + */ +int vb2_expbuf(struct vb2_queue *q, struct v4l2_exportbuffer *eb); + +/** + * vb2_dqbuf() - Dequeue a buffer to the userspace + * @q: pointer to &struct vb2_queue with videobuf2 queue. + * @b: buffer structure passed from userspace to + * &v4l2_ioctl_ops->vidioc_dqbuf handler in driver + * @nonblocking: if true, this call will not sleep waiting for a buffer if no + * buffers ready for dequeuing are present. Normally the driver + * would be passing (&file->f_flags & %O_NONBLOCK) here + * + * Should be called from &v4l2_ioctl_ops->vidioc_dqbuf ioctl handler + * of a driver. + * + * This function: + * + * #) verifies the passed buffer; + * #) calls &vb2_ops->buf_finish callback in the driver (if provided), in which + * driver can perform any additional operations that may be required before + * returning the buffer to userspace, such as cache sync; + * #) the buffer struct members are filled with relevant information for + * the userspace. + * + * The return values from this function are intended to be directly returned + * from &v4l2_ioctl_ops->vidioc_dqbuf handler in driver. + */ +int vb2_dqbuf(struct vb2_queue *q, struct v4l2_buffer *b, bool nonblocking); + +/** + * vb2_streamon - start streaming + * @q: pointer to &struct vb2_queue with videobuf2 queue. + * @type: type argument passed from userspace to vidioc_streamon handler, + * as defined by &enum v4l2_buf_type. + * + * Should be called from &v4l2_ioctl_ops->vidioc_streamon handler of a driver. + * + * This function: + * + * 1) verifies current state + * 2) passes any previously queued buffers to the driver and starts streaming + * + * The return values from this function are intended to be directly returned + * from &v4l2_ioctl_ops->vidioc_streamon handler in the driver. + */ +int vb2_streamon(struct vb2_queue *q, enum v4l2_buf_type type); + +/** + * vb2_streamoff - stop streaming + * @q: pointer to &struct vb2_queue with videobuf2 queue. + * @type: type argument passed from userspace to vidioc_streamoff handler + * + * Should be called from vidioc_streamoff handler of a driver. + * + * This function: + * + * #) verifies current state, + * #) stop streaming and dequeues any queued buffers, including those previously + * passed to the driver (after waiting for the driver to finish). + * + * This call can be used for pausing playback. + * The return values from this function are intended to be directly returned + * from vidioc_streamoff handler in the driver + */ +int vb2_streamoff(struct vb2_queue *q, enum v4l2_buf_type type); + +/** + * vb2_queue_init() - initialize a videobuf2 queue + * @q: pointer to &struct vb2_queue with videobuf2 queue. + * + * The vb2_queue structure should be allocated by the driver. The driver is + * responsible of clearing it's content and setting initial values for some + * required entries before calling this function. + * q->ops, q->mem_ops, q->type and q->io_modes are mandatory. Please refer + * to the struct vb2_queue description in include/media/videobuf2-core.h + * for more information. + */ +int __must_check vb2_queue_init(struct vb2_queue *q); + +/** + * vb2_queue_init_name() - initialize a videobuf2 queue with a name + * @q: pointer to &struct vb2_queue with videobuf2 queue. + * @name: the queue name + * + * This function initializes the vb2_queue exactly like vb2_queue_init(), + * and additionally sets the queue name. The queue name is used for logging + * purpose, and should uniquely identify the queue within the context of the + * device it belongs to. This is useful to attribute kernel log messages to the + * right queue for m2m devices or other devices that handle multiple queues. + */ +int __must_check vb2_queue_init_name(struct vb2_queue *q, const char *name); + +/** + * vb2_queue_release() - stop streaming, release the queue and free memory + * @q: pointer to &struct vb2_queue with videobuf2 queue. + * + * This function stops streaming and performs necessary clean ups, including + * freeing video buffer memory. The driver is responsible for freeing + * the vb2_queue structure itself. + */ +void vb2_queue_release(struct vb2_queue *q); + +/** + * vb2_poll() - implements poll userspace operation + * @q: pointer to &struct vb2_queue with videobuf2 queue. + * @file: file argument passed to the poll file operation handler + * @wait: wait argument passed to the poll file operation handler + * + * This function implements poll file operation handler for a driver. + * For CAPTURE queues, if a buffer is ready to be dequeued, the userspace will + * be informed that the file descriptor of a video device is available for + * reading. + * For OUTPUT queues, if a buffer is ready to be dequeued, the file descriptor + * will be reported as available for writing. + * + * If the driver uses struct v4l2_fh, then vb2_poll() will also check for any + * pending events. + * + * The return values from this function are intended to be directly returned + * from poll handler in driver. + */ +__poll_t vb2_poll(struct vb2_queue *q, struct file *file, poll_table *wait); + +/* + * The following functions are not part of the vb2 core API, but are simple + * helper functions that you can use in your struct v4l2_file_operations, + * struct v4l2_ioctl_ops and struct vb2_ops. They will serialize if vb2_queue->lock + * or video_device->lock is set, and they will set and test vb2_queue->owner + * to check if the calling filehandle is permitted to do the queuing operation. + */ + +/* struct v4l2_ioctl_ops helpers */ + +int vb2_ioctl_reqbufs(struct file *file, void *priv, + struct v4l2_requestbuffers *p); +int vb2_ioctl_create_bufs(struct file *file, void *priv, + struct v4l2_create_buffers *p); +int vb2_ioctl_prepare_buf(struct file *file, void *priv, + struct v4l2_buffer *p); +int vb2_ioctl_querybuf(struct file *file, void *priv, struct v4l2_buffer *p); +int vb2_ioctl_qbuf(struct file *file, void *priv, struct v4l2_buffer *p); +int vb2_ioctl_dqbuf(struct file *file, void *priv, struct v4l2_buffer *p); +int vb2_ioctl_streamon(struct file *file, void *priv, enum v4l2_buf_type i); +int vb2_ioctl_streamoff(struct file *file, void *priv, enum v4l2_buf_type i); +int vb2_ioctl_expbuf(struct file *file, void *priv, + struct v4l2_exportbuffer *p); + +/* struct v4l2_file_operations helpers */ + +int vb2_fop_mmap(struct file *file, struct vm_area_struct *vma); +int vb2_fop_release(struct file *file); +int _vb2_fop_release(struct file *file, struct mutex *lock); +ssize_t vb2_fop_write(struct file *file, const char __user *buf, + size_t count, loff_t *ppos); +ssize_t vb2_fop_read(struct file *file, char __user *buf, + size_t count, loff_t *ppos); +__poll_t vb2_fop_poll(struct file *file, poll_table *wait); +#ifndef CONFIG_MMU +unsigned long vb2_fop_get_unmapped_area(struct file *file, unsigned long addr, + unsigned long len, unsigned long pgoff, unsigned long flags); +#endif + +/** + * vb2_video_unregister_device - unregister the video device and release queue + * + * @vdev: pointer to &struct video_device + * + * If the driver uses vb2_fop_release()/_vb2_fop_release(), then it should use + * vb2_video_unregister_device() instead of video_unregister_device(). + * + * This function will call video_unregister_device() and then release the + * vb2_queue if streaming is in progress. This will stop streaming and + * this will simplify the unbind sequence since after this call all subdevs + * will have stopped streaming as well. + */ +void vb2_video_unregister_device(struct video_device *vdev); + +/** + * vb2_ops_wait_prepare - helper function to lock a struct &vb2_queue + * + * @vq: pointer to &struct vb2_queue + * + * ..note:: only use if vq->lock is non-NULL. + */ +void vb2_ops_wait_prepare(struct vb2_queue *vq); + +/** + * vb2_ops_wait_finish - helper function to unlock a struct &vb2_queue + * + * @vq: pointer to &struct vb2_queue + * + * ..note:: only use if vq->lock is non-NULL. + */ +void vb2_ops_wait_finish(struct vb2_queue *vq); + +struct media_request; +int vb2_request_validate(struct media_request *req); +void vb2_request_queue(struct media_request *req); + +#endif /* _MEDIA_VIDEOBUF2_V4L2_H */ diff --git a/include/media/videobuf2-vmalloc.h b/include/media/videobuf2-vmalloc.h new file mode 100644 index 000000000..a63fe6621 --- /dev/null +++ b/include/media/videobuf2-vmalloc.h @@ -0,0 +1,20 @@ +/* + * videobuf2-vmalloc.h - vmalloc memory allocator for videobuf2 + * + * Copyright (C) 2010 Samsung Electronics + * + * Author: Pawel Osciak <pawel@osciak.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation. + */ + +#ifndef _MEDIA_VIDEOBUF2_VMALLOC_H +#define _MEDIA_VIDEOBUF2_VMALLOC_H + +#include <media/videobuf2-v4l2.h> + +extern const struct vb2_mem_ops vb2_vmalloc_memops; + +#endif diff --git a/include/media/vp8-ctrls.h b/include/media/vp8-ctrls.h new file mode 100644 index 000000000..53cba826e --- /dev/null +++ b/include/media/vp8-ctrls.h @@ -0,0 +1,112 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * These are the VP8 state controls for use with stateless VP8 + * codec drivers. + * + * It turns out that these structs are not stable yet and will undergo + * more changes. So keep them private until they are stable and ready to + * become part of the official public API. + */ + +#ifndef _VP8_CTRLS_H_ +#define _VP8_CTRLS_H_ + +#include <linux/types.h> + +#define V4L2_PIX_FMT_VP8_FRAME v4l2_fourcc('V', 'P', '8', 'F') + +#define V4L2_CID_MPEG_VIDEO_VP8_FRAME_HEADER (V4L2_CID_MPEG_BASE + 2000) +#define V4L2_CTRL_TYPE_VP8_FRAME_HEADER 0x301 + +#define V4L2_VP8_SEGMENT_HEADER_FLAG_ENABLED 0x01 +#define V4L2_VP8_SEGMENT_HEADER_FLAG_UPDATE_MAP 0x02 +#define V4L2_VP8_SEGMENT_HEADER_FLAG_UPDATE_FEATURE_DATA 0x04 +#define V4L2_VP8_SEGMENT_HEADER_FLAG_DELTA_VALUE_MODE 0x08 + +struct v4l2_vp8_segment_header { + __s8 quant_update[4]; + __s8 lf_update[4]; + __u8 segment_probs[3]; + __u8 padding; + __u32 flags; +}; + +#define V4L2_VP8_LF_HEADER_ADJ_ENABLE 0x01 +#define V4L2_VP8_LF_HEADER_DELTA_UPDATE 0x02 +#define V4L2_VP8_LF_FILTER_TYPE_SIMPLE 0x04 +struct v4l2_vp8_loopfilter_header { + __s8 ref_frm_delta[4]; + __s8 mb_mode_delta[4]; + __u8 sharpness_level; + __u8 level; + __u16 padding; + __u32 flags; +}; + +struct v4l2_vp8_quantization_header { + __u8 y_ac_qi; + __s8 y_dc_delta; + __s8 y2_dc_delta; + __s8 y2_ac_delta; + __s8 uv_dc_delta; + __s8 uv_ac_delta; + __u16 padding; +}; + +struct v4l2_vp8_entropy_header { + __u8 coeff_probs[4][8][3][11]; + __u8 y_mode_probs[4]; + __u8 uv_mode_probs[3]; + __u8 mv_probs[2][19]; + __u8 padding[3]; +}; + +struct v4l2_vp8_entropy_coder_state { + __u8 range; + __u8 value; + __u8 bit_count; + __u8 padding; +}; + +#define V4L2_VP8_FRAME_HEADER_FLAG_KEY_FRAME 0x01 +#define V4L2_VP8_FRAME_HEADER_FLAG_EXPERIMENTAL 0x02 +#define V4L2_VP8_FRAME_HEADER_FLAG_SHOW_FRAME 0x04 +#define V4L2_VP8_FRAME_HEADER_FLAG_MB_NO_SKIP_COEFF 0x08 +#define V4L2_VP8_FRAME_HEADER_FLAG_SIGN_BIAS_GOLDEN 0x10 +#define V4L2_VP8_FRAME_HEADER_FLAG_SIGN_BIAS_ALT 0x20 + +#define VP8_FRAME_IS_KEY_FRAME(hdr) \ + (!!((hdr)->flags & V4L2_VP8_FRAME_HEADER_FLAG_KEY_FRAME)) + +struct v4l2_ctrl_vp8_frame_header { + struct v4l2_vp8_segment_header segment_header; + struct v4l2_vp8_loopfilter_header lf_header; + struct v4l2_vp8_quantization_header quant_header; + struct v4l2_vp8_entropy_header entropy_header; + struct v4l2_vp8_entropy_coder_state coder_state; + + __u16 width; + __u16 height; + + __u8 horizontal_scale; + __u8 vertical_scale; + + __u8 version; + __u8 prob_skip_false; + __u8 prob_intra; + __u8 prob_last; + __u8 prob_gf; + __u8 num_dct_parts; + + __u32 first_part_size; + __u32 first_part_header_bits; + __u32 dct_part_sizes[8]; + + __u64 last_frame_ts; + __u64 golden_frame_ts; + __u64 alt_frame_ts; + + __u64 flags; +}; + +#endif diff --git a/include/media/vsp1.h b/include/media/vsp1.h new file mode 100644 index 000000000..cc1b0d42c --- /dev/null +++ b/include/media/vsp1.h @@ -0,0 +1,118 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * vsp1.h -- R-Car VSP1 API + * + * Copyright (C) 2015 Renesas Electronics Corporation + * + * Contact: Laurent Pinchart (laurent.pinchart@ideasonboard.com) + */ +#ifndef __MEDIA_VSP1_H__ +#define __MEDIA_VSP1_H__ + +#include <linux/scatterlist.h> +#include <linux/types.h> +#include <linux/videodev2.h> + +struct device; + +int vsp1_du_init(struct device *dev); + +#define VSP1_DU_STATUS_COMPLETE BIT(0) +#define VSP1_DU_STATUS_WRITEBACK BIT(1) + +/** + * struct vsp1_du_lif_config - VSP LIF configuration + * @width: output frame width + * @height: output frame height + * @interlaced: true for interlaced pipelines + * @callback: frame completion callback function (optional). When a callback + * is provided, the VSP driver guarantees that it will be called once + * and only once for each vsp1_du_atomic_flush() call. + * @callback_data: data to be passed to the frame completion callback + */ +struct vsp1_du_lif_config { + unsigned int width; + unsigned int height; + bool interlaced; + + void (*callback)(void *data, unsigned int status, u32 crc); + void *callback_data; +}; + +int vsp1_du_setup_lif(struct device *dev, unsigned int pipe_index, + const struct vsp1_du_lif_config *cfg); + +/** + * struct vsp1_du_atomic_config - VSP atomic configuration parameters + * @pixelformat: plane pixel format (V4L2 4CC) + * @pitch: line pitch in bytes for the first plane + * @mem: DMA memory address for each plane of the frame buffer + * @src: source rectangle in the frame buffer (integer coordinates) + * @dst: destination rectangle on the display (integer coordinates) + * @alpha: alpha value (0: fully transparent, 255: fully opaque) + * @zpos: Z position of the plane (from 0 to number of planes minus 1) + */ +struct vsp1_du_atomic_config { + u32 pixelformat; + unsigned int pitch; + dma_addr_t mem[3]; + struct v4l2_rect src; + struct v4l2_rect dst; + unsigned int alpha; + unsigned int zpos; +}; + +/** + * enum vsp1_du_crc_source - Source used for CRC calculation + * @VSP1_DU_CRC_NONE: CRC calculation disabled + * @VSP1_DU_CRC_PLANE: Perform CRC calculation on an input plane + * @VSP1_DU_CRC_OUTPUT: Perform CRC calculation on the composed output + */ +enum vsp1_du_crc_source { + VSP1_DU_CRC_NONE, + VSP1_DU_CRC_PLANE, + VSP1_DU_CRC_OUTPUT, +}; + +/** + * struct vsp1_du_crc_config - VSP CRC computation configuration parameters + * @source: source for CRC calculation + * @index: index of the CRC source plane (when source is set to plane) + */ +struct vsp1_du_crc_config { + enum vsp1_du_crc_source source; + unsigned int index; +}; + +/** + * struct vsp1_du_writeback_config - VSP writeback configuration parameters + * @pixelformat: plane pixel format (V4L2 4CC) + * @pitch: line pitch in bytes for the first plane + * @mem: DMA memory address for each plane of the frame buffer + */ +struct vsp1_du_writeback_config { + u32 pixelformat; + unsigned int pitch; + dma_addr_t mem[3]; +}; + +/** + * struct vsp1_du_atomic_pipe_config - VSP atomic pipe configuration parameters + * @crc: CRC computation configuration + * @writeback: writeback configuration + */ +struct vsp1_du_atomic_pipe_config { + struct vsp1_du_crc_config crc; + struct vsp1_du_writeback_config writeback; +}; + +void vsp1_du_atomic_begin(struct device *dev, unsigned int pipe_index); +int vsp1_du_atomic_update(struct device *dev, unsigned int pipe_index, + unsigned int rpf, + const struct vsp1_du_atomic_config *cfg); +void vsp1_du_atomic_flush(struct device *dev, unsigned int pipe_index, + const struct vsp1_du_atomic_pipe_config *cfg); +int vsp1_du_map_sg(struct device *dev, struct sg_table *sgt); +void vsp1_du_unmap_sg(struct device *dev, struct sg_table *sgt); + +#endif /* __MEDIA_VSP1_H__ */ |