summaryrefslogtreecommitdiffstats
path: root/include/scsi/sas.h
diff options
context:
space:
mode:
Diffstat (limited to '')
-rw-r--r--include/scsi/sas.h710
1 files changed, 710 insertions, 0 deletions
diff --git a/include/scsi/sas.h b/include/scsi/sas.h
new file mode 100644
index 000000000..4726c1bbe
--- /dev/null
+++ b/include/scsi/sas.h
@@ -0,0 +1,710 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * SAS structures and definitions header file
+ *
+ * Copyright (C) 2005 Adaptec, Inc. All rights reserved.
+ * Copyright (C) 2005 Luben Tuikov <luben_tuikov@adaptec.com>
+ */
+
+#ifndef _SAS_H_
+#define _SAS_H_
+
+#include <linux/types.h>
+#include <asm/byteorder.h>
+
+#define SAS_ADDR_SIZE 8
+#define HASHED_SAS_ADDR_SIZE 3
+#define SAS_ADDR(_sa) ((unsigned long long) be64_to_cpu(*(__be64 *)(_sa)))
+
+#define SMP_REQUEST 0x40
+#define SMP_RESPONSE 0x41
+
+#define SSP_DATA 0x01
+#define SSP_XFER_RDY 0x05
+#define SSP_COMMAND 0x06
+#define SSP_RESPONSE 0x07
+#define SSP_TASK 0x16
+
+#define SMP_REPORT_GENERAL 0x00
+#define SMP_REPORT_MANUF_INFO 0x01
+#define SMP_READ_GPIO_REG 0x02
+#define SMP_DISCOVER 0x10
+#define SMP_REPORT_PHY_ERR_LOG 0x11
+#define SMP_REPORT_PHY_SATA 0x12
+#define SMP_REPORT_ROUTE_INFO 0x13
+#define SMP_WRITE_GPIO_REG 0x82
+#define SMP_CONF_ROUTE_INFO 0x90
+#define SMP_PHY_CONTROL 0x91
+#define SMP_PHY_TEST_FUNCTION 0x92
+
+#define SMP_RESP_FUNC_ACC 0x00
+#define SMP_RESP_FUNC_UNK 0x01
+#define SMP_RESP_FUNC_FAILED 0x02
+#define SMP_RESP_INV_FRM_LEN 0x03
+#define SMP_RESP_NO_PHY 0x10
+#define SMP_RESP_NO_INDEX 0x11
+#define SMP_RESP_PHY_NO_SATA 0x12
+#define SMP_RESP_PHY_UNK_OP 0x13
+#define SMP_RESP_PHY_UNK_TESTF 0x14
+#define SMP_RESP_PHY_TEST_INPROG 0x15
+#define SMP_RESP_PHY_VACANT 0x16
+
+/* SAM TMFs */
+#define TMF_ABORT_TASK 0x01
+#define TMF_ABORT_TASK_SET 0x02
+#define TMF_CLEAR_TASK_SET 0x04
+#define TMF_LU_RESET 0x08
+#define TMF_CLEAR_ACA 0x40
+#define TMF_QUERY_TASK 0x80
+
+/* SAS TMF responses */
+#define TMF_RESP_FUNC_COMPLETE 0x00
+#define TMF_RESP_INVALID_FRAME 0x02
+#define TMF_RESP_FUNC_ESUPP 0x04
+#define TMF_RESP_FUNC_FAILED 0x05
+#define TMF_RESP_FUNC_SUCC 0x08
+#define TMF_RESP_NO_LUN 0x09
+#define TMF_RESP_OVERLAPPED_TAG 0x0A
+
+enum sas_oob_mode {
+ OOB_NOT_CONNECTED,
+ SATA_OOB_MODE,
+ SAS_OOB_MODE
+};
+
+/* See sas_discover.c if you plan on changing these */
+enum sas_device_type {
+ /* these are SAS protocol defined (attached device type field) */
+ SAS_PHY_UNUSED = 0,
+ SAS_END_DEVICE = 1,
+ SAS_EDGE_EXPANDER_DEVICE = 2,
+ SAS_FANOUT_EXPANDER_DEVICE = 3,
+ /* these are internal to libsas */
+ SAS_HA = 4,
+ SAS_SATA_DEV = 5,
+ SAS_SATA_PM = 7,
+ SAS_SATA_PM_PORT = 8,
+ SAS_SATA_PENDING = 9,
+};
+
+enum sas_protocol {
+ SAS_PROTOCOL_NONE = 0,
+ SAS_PROTOCOL_SATA = 0x01,
+ SAS_PROTOCOL_SMP = 0x02,
+ SAS_PROTOCOL_STP = 0x04,
+ SAS_PROTOCOL_SSP = 0x08,
+ SAS_PROTOCOL_ALL = 0x0E,
+ SAS_PROTOCOL_STP_ALL = SAS_PROTOCOL_STP|SAS_PROTOCOL_SATA,
+};
+
+/* From the spec; local phys only */
+enum phy_func {
+ PHY_FUNC_NOP,
+ PHY_FUNC_LINK_RESET, /* Enables the phy */
+ PHY_FUNC_HARD_RESET,
+ PHY_FUNC_DISABLE,
+ PHY_FUNC_CLEAR_ERROR_LOG = 5,
+ PHY_FUNC_CLEAR_AFFIL,
+ PHY_FUNC_TX_SATA_PS_SIGNAL,
+ PHY_FUNC_RELEASE_SPINUP_HOLD = 0x10, /* LOCAL PORT ONLY! */
+ PHY_FUNC_SET_LINK_RATE,
+ PHY_FUNC_GET_EVENTS,
+};
+
+/* SAS LLDD would need to report only _very_few_ of those, like BROADCAST.
+ * Most of those are here for completeness.
+ */
+enum sas_prim {
+ SAS_PRIM_AIP_NORMAL = 1,
+ SAS_PRIM_AIP_R0 = 2,
+ SAS_PRIM_AIP_R1 = 3,
+ SAS_PRIM_AIP_R2 = 4,
+ SAS_PRIM_AIP_WC = 5,
+ SAS_PRIM_AIP_WD = 6,
+ SAS_PRIM_AIP_WP = 7,
+ SAS_PRIM_AIP_RWP = 8,
+
+ SAS_PRIM_BC_CH = 9,
+ SAS_PRIM_BC_RCH0 = 10,
+ SAS_PRIM_BC_RCH1 = 11,
+ SAS_PRIM_BC_R0 = 12,
+ SAS_PRIM_BC_R1 = 13,
+ SAS_PRIM_BC_R2 = 14,
+ SAS_PRIM_BC_R3 = 15,
+ SAS_PRIM_BC_R4 = 16,
+
+ SAS_PRIM_NOTIFY_ENSP= 17,
+ SAS_PRIM_NOTIFY_R0 = 18,
+ SAS_PRIM_NOTIFY_R1 = 19,
+ SAS_PRIM_NOTIFY_R2 = 20,
+
+ SAS_PRIM_CLOSE_CLAF = 21,
+ SAS_PRIM_CLOSE_NORM = 22,
+ SAS_PRIM_CLOSE_R0 = 23,
+ SAS_PRIM_CLOSE_R1 = 24,
+
+ SAS_PRIM_OPEN_RTRY = 25,
+ SAS_PRIM_OPEN_RJCT = 26,
+ SAS_PRIM_OPEN_ACPT = 27,
+
+ SAS_PRIM_DONE = 28,
+ SAS_PRIM_BREAK = 29,
+
+ SATA_PRIM_DMAT = 33,
+ SATA_PRIM_PMNAK = 34,
+ SATA_PRIM_PMACK = 35,
+ SATA_PRIM_PMREQ_S = 36,
+ SATA_PRIM_PMREQ_P = 37,
+ SATA_SATA_R_ERR = 38,
+};
+
+enum sas_open_rej_reason {
+ /* Abandon open */
+ SAS_OREJ_UNKNOWN = 0,
+ SAS_OREJ_BAD_DEST = 1,
+ SAS_OREJ_CONN_RATE = 2,
+ SAS_OREJ_EPROTO = 3,
+ SAS_OREJ_RESV_AB0 = 4,
+ SAS_OREJ_RESV_AB1 = 5,
+ SAS_OREJ_RESV_AB2 = 6,
+ SAS_OREJ_RESV_AB3 = 7,
+ SAS_OREJ_WRONG_DEST= 8,
+ SAS_OREJ_STP_NORES = 9,
+
+ /* Retry open */
+ SAS_OREJ_NO_DEST = 10,
+ SAS_OREJ_PATH_BLOCKED = 11,
+ SAS_OREJ_RSVD_CONT0 = 12,
+ SAS_OREJ_RSVD_CONT1 = 13,
+ SAS_OREJ_RSVD_INIT0 = 14,
+ SAS_OREJ_RSVD_INIT1 = 15,
+ SAS_OREJ_RSVD_STOP0 = 16,
+ SAS_OREJ_RSVD_STOP1 = 17,
+ SAS_OREJ_RSVD_RETRY = 18,
+};
+
+enum sas_gpio_reg_type {
+ SAS_GPIO_REG_CFG = 0,
+ SAS_GPIO_REG_RX = 1,
+ SAS_GPIO_REG_RX_GP = 2,
+ SAS_GPIO_REG_TX = 3,
+ SAS_GPIO_REG_TX_GP = 4,
+};
+
+struct dev_to_host_fis {
+ u8 fis_type; /* 0x34 */
+ u8 flags;
+ u8 status;
+ u8 error;
+
+ u8 lbal;
+ union { u8 lbam; u8 byte_count_low; };
+ union { u8 lbah; u8 byte_count_high; };
+ u8 device;
+
+ u8 lbal_exp;
+ u8 lbam_exp;
+ u8 lbah_exp;
+ u8 _r_a;
+
+ union { u8 sector_count; u8 interrupt_reason; };
+ u8 sector_count_exp;
+ u8 _r_b;
+ u8 _r_c;
+
+ u32 _r_d;
+} __attribute__ ((packed));
+
+struct host_to_dev_fis {
+ u8 fis_type; /* 0x27 */
+ u8 flags;
+ u8 command;
+ u8 features;
+
+ u8 lbal;
+ union { u8 lbam; u8 byte_count_low; };
+ union { u8 lbah; u8 byte_count_high; };
+ u8 device;
+
+ u8 lbal_exp;
+ u8 lbam_exp;
+ u8 lbah_exp;
+ u8 features_exp;
+
+ union { u8 sector_count; u8 interrupt_reason; };
+ u8 sector_count_exp;
+ u8 _r_a;
+ u8 control;
+
+ u32 _r_b;
+} __attribute__ ((packed));
+
+/* Prefer to have code clarity over header file clarity.
+ */
+#ifdef __LITTLE_ENDIAN_BITFIELD
+struct sas_identify_frame {
+ /* Byte 0 */
+ u8 frame_type:4;
+ u8 dev_type:3;
+ u8 _un0:1;
+
+ /* Byte 1 */
+ u8 _un1;
+
+ /* Byte 2 */
+ union {
+ struct {
+ u8 _un20:1;
+ u8 smp_iport:1;
+ u8 stp_iport:1;
+ u8 ssp_iport:1;
+ u8 _un247:4;
+ };
+ u8 initiator_bits;
+ };
+
+ /* Byte 3 */
+ union {
+ struct {
+ u8 _un30:1;
+ u8 smp_tport:1;
+ u8 stp_tport:1;
+ u8 ssp_tport:1;
+ u8 _un347:4;
+ };
+ u8 target_bits;
+ };
+
+ /* Byte 4 - 11 */
+ u8 _un4_11[8];
+
+ /* Byte 12 - 19 */
+ u8 sas_addr[SAS_ADDR_SIZE];
+
+ /* Byte 20 */
+ u8 phy_id;
+
+ u8 _un21_27[7];
+
+ __be32 crc;
+} __attribute__ ((packed));
+
+struct ssp_frame_hdr {
+ u8 frame_type;
+ u8 hashed_dest_addr[HASHED_SAS_ADDR_SIZE];
+ u8 _r_a;
+ u8 hashed_src_addr[HASHED_SAS_ADDR_SIZE];
+ __be16 _r_b;
+
+ u8 changing_data_ptr:1;
+ u8 retransmit:1;
+ u8 retry_data_frames:1;
+ u8 _r_c:5;
+
+ u8 num_fill_bytes:2;
+ u8 _r_d:6;
+
+ u32 _r_e;
+ __be16 tag;
+ __be16 tptt;
+ __be32 data_offs;
+} __attribute__ ((packed));
+
+struct ssp_response_iu {
+ u8 _r_a[10];
+
+ u8 datapres:2;
+ u8 _r_b:6;
+
+ u8 status;
+
+ u32 _r_c;
+
+ __be32 sense_data_len;
+ __be32 response_data_len;
+
+ u8 resp_data[0];
+ u8 sense_data[];
+} __attribute__ ((packed));
+
+struct ssp_command_iu {
+ u8 lun[8];
+ u8 _r_a;
+
+ union {
+ struct {
+ u8 attr:3;
+ u8 prio:4;
+ u8 efb:1;
+ };
+ u8 efb_prio_attr;
+ };
+
+ u8 _r_b;
+
+ u8 _r_c:2;
+ u8 add_cdb_len:6;
+
+ u8 cdb[16];
+ u8 add_cdb[];
+} __attribute__ ((packed));
+
+struct xfer_rdy_iu {
+ __be32 requested_offset;
+ __be32 write_data_len;
+ __be32 _r_a;
+} __attribute__ ((packed));
+
+struct ssp_tmf_iu {
+ u8 lun[8];
+ u16 _r_a;
+ u8 tmf;
+ u8 _r_b;
+ __be16 tag;
+ u8 _r_c[14];
+} __attribute__ ((packed));
+
+/* ---------- SMP ---------- */
+
+struct report_general_resp {
+ __be16 change_count;
+ __be16 route_indexes;
+ u8 _r_a;
+ u8 num_phys;
+
+ u8 conf_route_table:1;
+ u8 configuring:1;
+ u8 config_others:1;
+ u8 orej_retry_supp:1;
+ u8 stp_cont_awt:1;
+ u8 self_config:1;
+ u8 zone_config:1;
+ u8 t2t_supp:1;
+
+ u8 _r_c;
+
+ u8 enclosure_logical_id[8];
+
+ u8 _r_d[12];
+} __attribute__ ((packed));
+
+struct discover_resp {
+ u8 _r_a[5];
+
+ u8 phy_id;
+ __be16 _r_b;
+
+ u8 _r_c:4;
+ u8 attached_dev_type:3;
+ u8 _r_d:1;
+
+ u8 linkrate:4;
+ u8 _r_e:4;
+
+ u8 attached_sata_host:1;
+ u8 iproto:3;
+ u8 _r_f:4;
+
+ u8 attached_sata_dev:1;
+ u8 tproto:3;
+ u8 _r_g:3;
+ u8 attached_sata_ps:1;
+
+ u8 sas_addr[8];
+ u8 attached_sas_addr[8];
+ u8 attached_phy_id;
+
+ u8 _r_h[7];
+
+ u8 hmin_linkrate:4;
+ u8 pmin_linkrate:4;
+ u8 hmax_linkrate:4;
+ u8 pmax_linkrate:4;
+
+ u8 change_count;
+
+ u8 pptv:4;
+ u8 _r_i:3;
+ u8 virtual:1;
+
+ u8 routing_attr:4;
+ u8 _r_j:4;
+
+ u8 conn_type;
+ u8 conn_el_index;
+ u8 conn_phy_link;
+
+ u8 _r_k[8];
+} __attribute__ ((packed));
+
+struct report_phy_sata_resp {
+ u8 _r_a[5];
+
+ u8 phy_id;
+ u8 _r_b;
+
+ u8 affil_valid:1;
+ u8 affil_supp:1;
+ u8 _r_c:6;
+
+ u32 _r_d;
+
+ u8 stp_sas_addr[8];
+
+ struct dev_to_host_fis fis;
+
+ u32 _r_e;
+
+ u8 affil_stp_ini_addr[8];
+
+ __be32 crc;
+} __attribute__ ((packed));
+
+struct smp_resp {
+ u8 frame_type;
+ u8 function;
+ u8 result;
+ u8 reserved;
+ union {
+ struct report_general_resp rg;
+ struct discover_resp disc;
+ struct report_phy_sata_resp rps;
+ };
+} __attribute__ ((packed));
+
+#elif defined(__BIG_ENDIAN_BITFIELD)
+struct sas_identify_frame {
+ /* Byte 0 */
+ u8 _un0:1;
+ u8 dev_type:3;
+ u8 frame_type:4;
+
+ /* Byte 1 */
+ u8 _un1;
+
+ /* Byte 2 */
+ union {
+ struct {
+ u8 _un247:4;
+ u8 ssp_iport:1;
+ u8 stp_iport:1;
+ u8 smp_iport:1;
+ u8 _un20:1;
+ };
+ u8 initiator_bits;
+ };
+
+ /* Byte 3 */
+ union {
+ struct {
+ u8 _un347:4;
+ u8 ssp_tport:1;
+ u8 stp_tport:1;
+ u8 smp_tport:1;
+ u8 _un30:1;
+ };
+ u8 target_bits;
+ };
+
+ /* Byte 4 - 11 */
+ u8 _un4_11[8];
+
+ /* Byte 12 - 19 */
+ u8 sas_addr[SAS_ADDR_SIZE];
+
+ /* Byte 20 */
+ u8 phy_id;
+
+ u8 _un21_27[7];
+
+ __be32 crc;
+} __attribute__ ((packed));
+
+struct ssp_frame_hdr {
+ u8 frame_type;
+ u8 hashed_dest_addr[HASHED_SAS_ADDR_SIZE];
+ u8 _r_a;
+ u8 hashed_src_addr[HASHED_SAS_ADDR_SIZE];
+ __be16 _r_b;
+
+ u8 _r_c:5;
+ u8 retry_data_frames:1;
+ u8 retransmit:1;
+ u8 changing_data_ptr:1;
+
+ u8 _r_d:6;
+ u8 num_fill_bytes:2;
+
+ u32 _r_e;
+ __be16 tag;
+ __be16 tptt;
+ __be32 data_offs;
+} __attribute__ ((packed));
+
+struct ssp_response_iu {
+ u8 _r_a[10];
+
+ u8 _r_b:6;
+ u8 datapres:2;
+
+ u8 status;
+
+ u32 _r_c;
+
+ __be32 sense_data_len;
+ __be32 response_data_len;
+
+ u8 resp_data[0];
+ u8 sense_data[];
+} __attribute__ ((packed));
+
+struct ssp_command_iu {
+ u8 lun[8];
+ u8 _r_a;
+
+ union {
+ struct {
+ u8 efb:1;
+ u8 prio:4;
+ u8 attr:3;
+ };
+ u8 efb_prio_attr;
+ };
+
+ u8 _r_b;
+
+ u8 add_cdb_len:6;
+ u8 _r_c:2;
+
+ u8 cdb[16];
+ u8 add_cdb[];
+} __attribute__ ((packed));
+
+struct xfer_rdy_iu {
+ __be32 requested_offset;
+ __be32 write_data_len;
+ __be32 _r_a;
+} __attribute__ ((packed));
+
+struct ssp_tmf_iu {
+ u8 lun[8];
+ u16 _r_a;
+ u8 tmf;
+ u8 _r_b;
+ __be16 tag;
+ u8 _r_c[14];
+} __attribute__ ((packed));
+
+/* ---------- SMP ---------- */
+
+struct report_general_resp {
+ __be16 change_count;
+ __be16 route_indexes;
+ u8 _r_a;
+ u8 num_phys;
+
+ u8 t2t_supp:1;
+ u8 zone_config:1;
+ u8 self_config:1;
+ u8 stp_cont_awt:1;
+ u8 orej_retry_supp:1;
+ u8 config_others:1;
+ u8 configuring:1;
+ u8 conf_route_table:1;
+
+ u8 _r_c;
+
+ u8 enclosure_logical_id[8];
+
+ u8 _r_d[12];
+} __attribute__ ((packed));
+
+struct discover_resp {
+ u8 _r_a[5];
+
+ u8 phy_id;
+ __be16 _r_b;
+
+ u8 _r_d:1;
+ u8 attached_dev_type:3;
+ u8 _r_c:4;
+
+ u8 _r_e:4;
+ u8 linkrate:4;
+
+ u8 _r_f:4;
+ u8 iproto:3;
+ u8 attached_sata_host:1;
+
+ u8 attached_sata_ps:1;
+ u8 _r_g:3;
+ u8 tproto:3;
+ u8 attached_sata_dev:1;
+
+ u8 sas_addr[8];
+ u8 attached_sas_addr[8];
+ u8 attached_phy_id;
+
+ u8 _r_h[7];
+
+ u8 pmin_linkrate:4;
+ u8 hmin_linkrate:4;
+ u8 pmax_linkrate:4;
+ u8 hmax_linkrate:4;
+
+ u8 change_count;
+
+ u8 virtual:1;
+ u8 _r_i:3;
+ u8 pptv:4;
+
+ u8 _r_j:4;
+ u8 routing_attr:4;
+
+ u8 conn_type;
+ u8 conn_el_index;
+ u8 conn_phy_link;
+
+ u8 _r_k[8];
+} __attribute__ ((packed));
+
+struct report_phy_sata_resp {
+ u8 _r_a[5];
+
+ u8 phy_id;
+ u8 _r_b;
+
+ u8 _r_c:6;
+ u8 affil_supp:1;
+ u8 affil_valid:1;
+
+ u32 _r_d;
+
+ u8 stp_sas_addr[8];
+
+ struct dev_to_host_fis fis;
+
+ u32 _r_e;
+
+ u8 affil_stp_ini_addr[8];
+
+ __be32 crc;
+} __attribute__ ((packed));
+
+struct smp_resp {
+ u8 frame_type;
+ u8 function;
+ u8 result;
+ u8 reserved;
+ union {
+ struct report_general_resp rg;
+ struct discover_resp disc;
+ struct report_phy_sata_resp rps;
+ };
+} __attribute__ ((packed));
+
+#else
+#error "Bitfield order not defined!"
+#endif
+
+#endif /* _SAS_H_ */