diff options
Diffstat (limited to '')
| -rw-r--r-- | include/scsi/scsi.h | 277 |
1 files changed, 277 insertions, 0 deletions
diff --git a/include/scsi/scsi.h b/include/scsi/scsi.h new file mode 100644 index 000000000..5339baadc --- /dev/null +++ b/include/scsi/scsi.h @@ -0,0 +1,277 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * This header file contains public constants and structures used by + * the SCSI initiator code. + */ +#ifndef _SCSI_SCSI_H +#define _SCSI_SCSI_H + +#include <linux/types.h> +#include <linux/scatterlist.h> +#include <linux/kernel.h> +#include <scsi/scsi_common.h> +#include <scsi/scsi_proto.h> + +struct scsi_cmnd; + +enum scsi_timeouts { + SCSI_DEFAULT_EH_TIMEOUT = 10 * HZ, +}; + +/* + * DIX-capable adapters effectively support infinite chaining for the + * protection information scatterlist + */ +#define SCSI_MAX_PROT_SG_SEGMENTS 0xFFFF + +/* + * Special value for scanning to specify scanning or rescanning of all + * possible channels, (target) ids, or luns on a given shost. + */ +#define SCAN_WILD_CARD ~0 + +/** scsi_status_is_good - check the status return. + * + * @status: the status passed up from the driver (including host and + * driver components) + * + * This returns true for known good conditions that may be treated as + * command completed normally + */ +static inline int scsi_status_is_good(int status) +{ + /* + * FIXME: bit0 is listed as reserved in SCSI-2, but is + * significant in SCSI-3. For now, we follow the SCSI-2 + * behaviour and ignore reserved bits. + */ + status &= 0xfe; + return ((status == SAM_STAT_GOOD) || + (status == SAM_STAT_CONDITION_MET) || + /* Next two "intermediate" statuses are obsolete in SAM-4 */ + (status == SAM_STAT_INTERMEDIATE) || + (status == SAM_STAT_INTERMEDIATE_CONDITION_MET) || + /* FIXME: this is obsolete in SAM-3 */ + (status == SAM_STAT_COMMAND_TERMINATED)); +} + + +/* + * standard mode-select header prepended to all mode-select commands + */ + +struct ccs_modesel_head { + __u8 _r1; /* reserved */ + __u8 medium; /* device-specific medium type */ + __u8 _r2; /* reserved */ + __u8 block_desc_length; /* block descriptor length */ + __u8 density; /* device-specific density code */ + __u8 number_blocks_hi; /* number of blocks in this block desc */ + __u8 number_blocks_med; + __u8 number_blocks_lo; + __u8 _r3; + __u8 block_length_hi; /* block length for blocks in this desc */ + __u8 block_length_med; + __u8 block_length_lo; +}; + +/* + * The Well Known LUNS (SAM-3) in our int representation of a LUN + */ +#define SCSI_W_LUN_BASE 0xc100 +#define SCSI_W_LUN_REPORT_LUNS (SCSI_W_LUN_BASE + 1) +#define SCSI_W_LUN_ACCESS_CONTROL (SCSI_W_LUN_BASE + 2) +#define SCSI_W_LUN_TARGET_LOG_PAGE (SCSI_W_LUN_BASE + 3) + +static inline int scsi_is_wlun(u64 lun) +{ + return (lun & 0xff00) == SCSI_W_LUN_BASE; +} + + +/* + * MESSAGE CODES + */ + +#define COMMAND_COMPLETE 0x00 +#define EXTENDED_MESSAGE 0x01 +#define EXTENDED_MODIFY_DATA_POINTER 0x00 +#define EXTENDED_SDTR 0x01 +#define EXTENDED_EXTENDED_IDENTIFY 0x02 /* SCSI-I only */ +#define EXTENDED_WDTR 0x03 +#define EXTENDED_PPR 0x04 +#define EXTENDED_MODIFY_BIDI_DATA_PTR 0x05 +#define SAVE_POINTERS 0x02 +#define RESTORE_POINTERS 0x03 +#define DISCONNECT 0x04 +#define INITIATOR_ERROR 0x05 +#define ABORT_TASK_SET 0x06 +#define MESSAGE_REJECT 0x07 +#define NOP 0x08 +#define MSG_PARITY_ERROR 0x09 +#define LINKED_CMD_COMPLETE 0x0a +#define LINKED_FLG_CMD_COMPLETE 0x0b +#define TARGET_RESET 0x0c +#define ABORT_TASK 0x0d +#define CLEAR_TASK_SET 0x0e +#define INITIATE_RECOVERY 0x0f /* SCSI-II only */ +#define RELEASE_RECOVERY 0x10 /* SCSI-II only */ +#define CLEAR_ACA 0x16 +#define LOGICAL_UNIT_RESET 0x17 +#define SIMPLE_QUEUE_TAG 0x20 +#define HEAD_OF_QUEUE_TAG 0x21 +#define ORDERED_QUEUE_TAG 0x22 +#define IGNORE_WIDE_RESIDUE 0x23 +#define ACA 0x24 +#define QAS_REQUEST 0x55 + +/* Old SCSI2 names, don't use in new code */ +#define BUS_DEVICE_RESET TARGET_RESET +#define ABORT ABORT_TASK_SET + +/* + * Host byte codes + */ + +#define DID_OK 0x00 /* NO error */ +#define DID_NO_CONNECT 0x01 /* Couldn't connect before timeout period */ +#define DID_BUS_BUSY 0x02 /* BUS stayed busy through time out period */ +#define DID_TIME_OUT 0x03 /* TIMED OUT for other reason */ +#define DID_BAD_TARGET 0x04 /* BAD target. */ +#define DID_ABORT 0x05 /* Told to abort for some other reason */ +#define DID_PARITY 0x06 /* Parity error */ +#define DID_ERROR 0x07 /* Internal error */ +#define DID_RESET 0x08 /* Reset by somebody. */ +#define DID_BAD_INTR 0x09 /* Got an interrupt we weren't expecting. */ +#define DID_PASSTHROUGH 0x0a /* Force command past mid-layer */ +#define DID_SOFT_ERROR 0x0b /* The low level driver just wish a retry */ +#define DID_IMM_RETRY 0x0c /* Retry without decrementing retry count */ +#define DID_REQUEUE 0x0d /* Requeue command (no immediate retry) also + * without decrementing the retry count */ +#define DID_TRANSPORT_DISRUPTED 0x0e /* Transport error disrupted execution + * and the driver blocked the port to + * recover the link. Transport class will + * retry or fail IO */ +#define DID_TRANSPORT_FAILFAST 0x0f /* Transport class fastfailed the io */ +#define DID_TARGET_FAILURE 0x10 /* Permanent target failure, do not retry on + * other paths */ +#define DID_NEXUS_FAILURE 0x11 /* Permanent nexus failure, retry on other + * paths might yield different results */ +#define DID_ALLOC_FAILURE 0x12 /* Space allocation on the device failed */ +#define DID_MEDIUM_ERROR 0x13 /* Medium error */ +#define DRIVER_OK 0x00 /* Driver status */ + +/* + * These indicate the error that occurred, and what is available. + */ + +#define DRIVER_BUSY 0x01 +#define DRIVER_SOFT 0x02 +#define DRIVER_MEDIA 0x03 +#define DRIVER_ERROR 0x04 + +#define DRIVER_INVALID 0x05 +#define DRIVER_TIMEOUT 0x06 +#define DRIVER_HARD 0x07 +#define DRIVER_SENSE 0x08 + +/* + * Internal return values. + */ + +#define NEEDS_RETRY 0x2001 +#define SUCCESS 0x2002 +#define FAILED 0x2003 +#define QUEUED 0x2004 +#define SOFT_ERROR 0x2005 +#define ADD_TO_MLQUEUE 0x2006 +#define TIMEOUT_ERROR 0x2007 +#define SCSI_RETURN_NOT_HANDLED 0x2008 +#define FAST_IO_FAIL 0x2009 + +/* + * Midlevel queue return values. + */ +#define SCSI_MLQUEUE_HOST_BUSY 0x1055 +#define SCSI_MLQUEUE_DEVICE_BUSY 0x1056 +#define SCSI_MLQUEUE_EH_RETRY 0x1057 +#define SCSI_MLQUEUE_TARGET_BUSY 0x1058 + +/* + * Use these to separate status msg and our bytes + * + * These are set by: + * + * status byte = set from target device + * msg_byte = return status from host adapter itself. + * host_byte = set by low-level driver to indicate status. + * driver_byte = set by mid-level. + */ +#define status_byte(result) (((result) >> 1) & 0x7f) +#define msg_byte(result) (((result) >> 8) & 0xff) +#define host_byte(result) (((result) >> 16) & 0xff) +#define driver_byte(result) (((result) >> 24) & 0xff) + +#define sense_class(sense) (((sense) >> 4) & 0x7) +#define sense_error(sense) ((sense) & 0xf) +#define sense_valid(sense) ((sense) & 0x80) + +/* + * default timeouts +*/ +#define FORMAT_UNIT_TIMEOUT (2 * 60 * 60 * HZ) +#define START_STOP_TIMEOUT (60 * HZ) +#define MOVE_MEDIUM_TIMEOUT (5 * 60 * HZ) +#define READ_ELEMENT_STATUS_TIMEOUT (5 * 60 * HZ) +#define READ_DEFECT_DATA_TIMEOUT (60 * HZ ) + + +#define IDENTIFY_BASE 0x80 +#define IDENTIFY(can_disconnect, lun) (IDENTIFY_BASE |\ + ((can_disconnect) ? 0x40 : 0) |\ + ((lun) & 0x07)) + +/* + * struct scsi_device::scsi_level values. For SCSI devices other than those + * prior to SCSI-2 (i.e. over 12 years old) this value is (resp[2] + 1) + * where "resp" is a byte array of the response to an INQUIRY. The scsi_level + * variable is visible to the user via sysfs. + */ + +#define SCSI_UNKNOWN 0 +#define SCSI_1 1 +#define SCSI_1_CCS 2 +#define SCSI_2 3 +#define SCSI_3 4 /* SPC */ +#define SCSI_SPC_2 5 +#define SCSI_SPC_3 6 + +/* + * INQ PERIPHERAL QUALIFIERS + */ +#define SCSI_INQ_PQ_CON 0x00 +#define SCSI_INQ_PQ_NOT_CON 0x01 +#define SCSI_INQ_PQ_NOT_CAP 0x03 + + +/* + * Here are some scsi specific ioctl commands which are sometimes useful. + * + * Note that include/linux/cdrom.h also defines IOCTL 0x5300 - 0x5395 + */ + +/* Used to obtain PUN and LUN info. Conflicts with CDROMAUDIOBUFSIZ */ +#define SCSI_IOCTL_GET_IDLUN 0x5382 + +/* 0x5383 and 0x5384 were used for SCSI_IOCTL_TAGGED_{ENABLE,DISABLE} */ + +/* Used to obtain the host number of a device. */ +#define SCSI_IOCTL_PROBE_HOST 0x5385 + +/* Used to obtain the bus number for a device */ +#define SCSI_IOCTL_GET_BUS_NUMBER 0x5386 + +/* Used to obtain the PCI location of a device */ +#define SCSI_IOCTL_GET_PCI 0x5387 + +#endif /* _SCSI_SCSI_H */ |