diff options
Diffstat (limited to '')
| -rw-r--r-- | include/soc/fsl/qe/ucc_slow.h | 272 |
1 files changed, 272 insertions, 0 deletions
diff --git a/include/soc/fsl/qe/ucc_slow.h b/include/soc/fsl/qe/ucc_slow.h new file mode 100644 index 000000000..11a216e4e --- /dev/null +++ b/include/soc/fsl/qe/ucc_slow.h @@ -0,0 +1,272 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * Copyright (C) 2006 Freescale Semiconductor, Inc. All rights reserved. + * + * Authors: Shlomi Gridish <gridish@freescale.com> + * Li Yang <leoli@freescale.com> + * + * Description: + * Internal header file for UCC SLOW unit routines. + */ +#ifndef __UCC_SLOW_H__ +#define __UCC_SLOW_H__ + +#include <linux/kernel.h> + +#include <soc/fsl/qe/immap_qe.h> +#include <soc/fsl/qe/qe.h> + +#include <soc/fsl/qe/ucc.h> + +/* transmit BD's status */ +#define T_R 0x80000000 /* ready bit */ +#define T_PAD 0x40000000 /* add pads to short frames */ +#define T_W 0x20000000 /* wrap bit */ +#define T_I 0x10000000 /* interrupt on completion */ +#define T_L 0x08000000 /* last */ + +#define T_A 0x04000000 /* Address - the data transmitted as address + chars */ +#define T_TC 0x04000000 /* transmit CRC */ +#define T_CM 0x02000000 /* continuous mode */ +#define T_DEF 0x02000000 /* collision on previous attempt to transmit */ +#define T_P 0x01000000 /* Preamble - send Preamble sequence before + data */ +#define T_HB 0x01000000 /* heartbeat */ +#define T_NS 0x00800000 /* No Stop */ +#define T_LC 0x00800000 /* late collision */ +#define T_RL 0x00400000 /* retransmission limit */ +#define T_UN 0x00020000 /* underrun */ +#define T_CT 0x00010000 /* CTS lost */ +#define T_CSL 0x00010000 /* carrier sense lost */ +#define T_RC 0x003c0000 /* retry count */ + +/* Receive BD's status */ +#define R_E 0x80000000 /* buffer empty */ +#define R_W 0x20000000 /* wrap bit */ +#define R_I 0x10000000 /* interrupt on reception */ +#define R_L 0x08000000 /* last */ +#define R_C 0x08000000 /* the last byte in this buffer is a cntl + char */ +#define R_F 0x04000000 /* first */ +#define R_A 0x04000000 /* the first byte in this buffer is address + byte */ +#define R_CM 0x02000000 /* continuous mode */ +#define R_ID 0x01000000 /* buffer close on reception of idles */ +#define R_M 0x01000000 /* Frame received because of promiscuous + mode */ +#define R_AM 0x00800000 /* Address match */ +#define R_DE 0x00800000 /* Address match */ +#define R_LG 0x00200000 /* Break received */ +#define R_BR 0x00200000 /* Frame length violation */ +#define R_NO 0x00100000 /* Rx Non Octet Aligned Packet */ +#define R_FR 0x00100000 /* Framing Error (no stop bit) character + received */ +#define R_PR 0x00080000 /* Parity Error character received */ +#define R_AB 0x00080000 /* Frame Aborted */ +#define R_SH 0x00080000 /* frame is too short */ +#define R_CR 0x00040000 /* CRC Error */ +#define R_OV 0x00020000 /* Overrun */ +#define R_CD 0x00010000 /* CD lost */ +#define R_CL 0x00010000 /* this frame is closed because of a + collision */ + +/* Rx Data buffer must be 4 bytes aligned in most cases.*/ +#define UCC_SLOW_RX_ALIGN 4 +#define UCC_SLOW_MRBLR_ALIGNMENT 4 +#define UCC_SLOW_PRAM_SIZE 0x100 +#define ALIGNMENT_OF_UCC_SLOW_PRAM 64 + +/* UCC Slow Channel Protocol Mode */ +enum ucc_slow_channel_protocol_mode { + UCC_SLOW_CHANNEL_PROTOCOL_MODE_QMC = 0x00000002, + UCC_SLOW_CHANNEL_PROTOCOL_MODE_UART = 0x00000004, + UCC_SLOW_CHANNEL_PROTOCOL_MODE_BISYNC = 0x00000008, +}; + +/* UCC Slow Transparent Transmit CRC (TCRC) */ +enum ucc_slow_transparent_tcrc { + /* 16-bit CCITT CRC (HDLC). (X16 + X12 + X5 + 1) */ + UCC_SLOW_TRANSPARENT_TCRC_CCITT_CRC16 = 0x00000000, + /* CRC16 (BISYNC). (X16 + X15 + X2 + 1) */ + UCC_SLOW_TRANSPARENT_TCRC_CRC16 = 0x00004000, + /* 32-bit CCITT CRC (Ethernet and HDLC) */ + UCC_SLOW_TRANSPARENT_TCRC_CCITT_CRC32 = 0x00008000, +}; + +/* UCC Slow oversampling rate for transmitter (TDCR) */ +enum ucc_slow_tx_oversampling_rate { + /* 1x clock mode */ + UCC_SLOW_OVERSAMPLING_RATE_TX_TDCR_1 = 0x00000000, + /* 8x clock mode */ + UCC_SLOW_OVERSAMPLING_RATE_TX_TDCR_8 = 0x00010000, + /* 16x clock mode */ + UCC_SLOW_OVERSAMPLING_RATE_TX_TDCR_16 = 0x00020000, + /* 32x clock mode */ + UCC_SLOW_OVERSAMPLING_RATE_TX_TDCR_32 = 0x00030000, +}; + +/* UCC Slow Oversampling rate for receiver (RDCR) +*/ +enum ucc_slow_rx_oversampling_rate { + /* 1x clock mode */ + UCC_SLOW_OVERSAMPLING_RATE_RX_RDCR_1 = 0x00000000, + /* 8x clock mode */ + UCC_SLOW_OVERSAMPLING_RATE_RX_RDCR_8 = 0x00004000, + /* 16x clock mode */ + UCC_SLOW_OVERSAMPLING_RATE_RX_RDCR_16 = 0x00008000, + /* 32x clock mode */ + UCC_SLOW_OVERSAMPLING_RATE_RX_RDCR_32 = 0x0000c000, +}; + +/* UCC Slow Transmitter encoding method (TENC) +*/ +enum ucc_slow_tx_encoding_method { + UCC_SLOW_TRANSMITTER_ENCODING_METHOD_TENC_NRZ = 0x00000000, + UCC_SLOW_TRANSMITTER_ENCODING_METHOD_TENC_NRZI = 0x00000100 +}; + +/* UCC Slow Receiver decoding method (RENC) +*/ +enum ucc_slow_rx_decoding_method { + UCC_SLOW_RECEIVER_DECODING_METHOD_RENC_NRZ = 0x00000000, + UCC_SLOW_RECEIVER_DECODING_METHOD_RENC_NRZI = 0x00000800 +}; + +/* UCC Slow Diagnostic mode (DIAG) +*/ +enum ucc_slow_diag_mode { + UCC_SLOW_DIAG_MODE_NORMAL = 0x00000000, + UCC_SLOW_DIAG_MODE_LOOPBACK = 0x00000040, + UCC_SLOW_DIAG_MODE_ECHO = 0x00000080, + UCC_SLOW_DIAG_MODE_LOOPBACK_ECHO = 0x000000c0 +}; + +struct ucc_slow_info { + int ucc_num; + int protocol; /* QE_CR_PROTOCOL_xxx */ + enum qe_clock rx_clock; + enum qe_clock tx_clock; + phys_addr_t regs; + int irq; + u16 uccm_mask; + int data_mem_part; + int init_tx; + int init_rx; + u32 tx_bd_ring_len; + u32 rx_bd_ring_len; + int rx_interrupts; + int brkpt_support; + int grant_support; + int tsa; + int cdp; + int cds; + int ctsp; + int ctss; + int rinv; + int tinv; + int rtsm; + int rfw; + int tci; + int tend; + int tfl; + int txsy; + u16 max_rx_buf_length; + enum ucc_slow_transparent_tcrc tcrc; + enum ucc_slow_channel_protocol_mode mode; + enum ucc_slow_diag_mode diag; + enum ucc_slow_tx_oversampling_rate tdcr; + enum ucc_slow_rx_oversampling_rate rdcr; + enum ucc_slow_tx_encoding_method tenc; + enum ucc_slow_rx_decoding_method renc; +}; + +struct ucc_slow_private { + struct ucc_slow_info *us_info; + struct ucc_slow __iomem *us_regs; /* Ptr to memory map of UCC regs */ + struct ucc_slow_pram __iomem *us_pram; /* a pointer to the parameter RAM */ + s32 us_pram_offset; + int enabled_tx; /* Whether channel is enabled for Tx (ENT) */ + int enabled_rx; /* Whether channel is enabled for Rx (ENR) */ + int stopped_tx; /* Whether channel has been stopped for Tx + (STOP_TX, etc.) */ + int stopped_rx; /* Whether channel has been stopped for Rx */ + struct list_head confQ; /* frames passed to chip waiting for tx */ + u32 first_tx_bd_mask; /* mask is used in Tx routine to save status + and length for first BD in a frame */ + s32 tx_base_offset; /* first BD in Tx BD table offset (In MURAM) */ + s32 rx_base_offset; /* first BD in Rx BD table offset (In MURAM) */ + struct qe_bd __iomem *confBd; /* next BD for confirm after Tx */ + struct qe_bd __iomem *tx_bd; /* next BD for new Tx request */ + struct qe_bd __iomem *rx_bd; /* next BD to collect after Rx */ + void *p_rx_frame; /* accumulating receive frame */ + __be16 __iomem *p_ucce; /* a pointer to the event register in memory */ + __be16 __iomem *p_uccm; /* a pointer to the mask register in memory */ + u16 saved_uccm; /* a saved mask for the RX Interrupt bits */ +#ifdef STATISTICS + u32 tx_frames; /* Transmitted frames counters */ + u32 rx_frames; /* Received frames counters (only frames + passed to application) */ + u32 rx_discarded; /* Discarded frames counters (frames that + were discarded by the driver due to + errors) */ +#endif /* STATISTICS */ +}; + +/* ucc_slow_init + * Initializes Slow UCC according to provided parameters. + * + * us_info - (In) pointer to the slow UCC info structure. + * uccs_ret - (Out) pointer to the slow UCC structure. + */ +int ucc_slow_init(struct ucc_slow_info * us_info, struct ucc_slow_private ** uccs_ret); + +/* ucc_slow_free + * Frees all resources for slow UCC. + * + * uccs - (In) pointer to the slow UCC structure. + */ +void ucc_slow_free(struct ucc_slow_private * uccs); + +/* ucc_slow_enable + * Enables a fast UCC port. + * This routine enables Tx and/or Rx through the General UCC Mode Register. + * + * uccs - (In) pointer to the slow UCC structure. + * mode - (In) TX, RX, or both. + */ +void ucc_slow_enable(struct ucc_slow_private * uccs, enum comm_dir mode); + +/* ucc_slow_disable + * Disables a fast UCC port. + * This routine disables Tx and/or Rx through the General UCC Mode Register. + * + * uccs - (In) pointer to the slow UCC structure. + * mode - (In) TX, RX, or both. + */ +void ucc_slow_disable(struct ucc_slow_private * uccs, enum comm_dir mode); + +/* ucc_slow_graceful_stop_tx + * Smoothly stops transmission on a specified slow UCC. + * + * uccs - (In) pointer to the slow UCC structure. + */ +void ucc_slow_graceful_stop_tx(struct ucc_slow_private * uccs); + +/* ucc_slow_stop_tx + * Stops transmission on a specified slow UCC. + * + * uccs - (In) pointer to the slow UCC structure. + */ +void ucc_slow_stop_tx(struct ucc_slow_private * uccs); + +/* ucc_slow_restart_tx + * Restarts transmitting on a specified slow UCC. + * + * uccs - (In) pointer to the slow UCC structure. + */ +void ucc_slow_restart_tx(struct ucc_slow_private *uccs); + +u32 ucc_slow_get_qe_cr_subblock(int uccs_num); + +#endif /* __UCC_SLOW_H__ */ |