diff options
Diffstat (limited to 'include/sound/hda_register.h')
-rw-r--r-- | include/sound/hda_register.h | 322 |
1 files changed, 322 insertions, 0 deletions
diff --git a/include/sound/hda_register.h b/include/sound/hda_register.h new file mode 100644 index 000000000..4f987b1f3 --- /dev/null +++ b/include/sound/hda_register.h @@ -0,0 +1,322 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * HD-audio controller (Azalia) registers and helpers + * + * For traditional reasons, we still use azx_ prefix here + */ + +#ifndef __SOUND_HDA_REGISTER_H +#define __SOUND_HDA_REGISTER_H + +#include <linux/io.h> +#include <sound/hdaudio.h> + +#define AZX_REG_GCAP 0x00 +#define AZX_GCAP_64OK (1 << 0) /* 64bit address support */ +#define AZX_GCAP_NSDO (3 << 1) /* # of serial data out signals */ +#define AZX_GCAP_BSS (31 << 3) /* # of bidirectional streams */ +#define AZX_GCAP_ISS (15 << 8) /* # of input streams */ +#define AZX_GCAP_OSS (15 << 12) /* # of output streams */ +#define AZX_REG_VMIN 0x02 +#define AZX_REG_VMAJ 0x03 +#define AZX_REG_OUTPAY 0x04 +#define AZX_REG_INPAY 0x06 +#define AZX_REG_GCTL 0x08 +#define AZX_GCTL_RESET (1 << 0) /* controller reset */ +#define AZX_GCTL_FCNTRL (1 << 1) /* flush control */ +#define AZX_GCTL_UNSOL (1 << 8) /* accept unsol. response enable */ +#define AZX_REG_WAKEEN 0x0c +#define AZX_REG_STATESTS 0x0e +#define AZX_REG_GSTS 0x10 +#define AZX_GSTS_FSTS (1 << 1) /* flush status */ +#define AZX_REG_GCAP2 0x12 +#define AZX_REG_LLCH 0x14 +#define AZX_REG_OUTSTRMPAY 0x18 +#define AZX_REG_INSTRMPAY 0x1A +#define AZX_REG_INTCTL 0x20 +#define AZX_REG_INTSTS 0x24 +#define AZX_REG_WALLCLK 0x30 /* 24Mhz source */ +#define AZX_REG_OLD_SSYNC 0x34 /* SSYNC for old ICH */ +#define AZX_REG_SSYNC 0x38 +#define AZX_REG_CORBLBASE 0x40 +#define AZX_REG_CORBUBASE 0x44 +#define AZX_REG_CORBWP 0x48 +#define AZX_REG_CORBRP 0x4a +#define AZX_CORBRP_RST (1 << 15) /* read pointer reset */ +#define AZX_REG_CORBCTL 0x4c +#define AZX_CORBCTL_RUN (1 << 1) /* enable DMA */ +#define AZX_CORBCTL_CMEIE (1 << 0) /* enable memory error irq */ +#define AZX_REG_CORBSTS 0x4d +#define AZX_CORBSTS_CMEI (1 << 0) /* memory error indication */ +#define AZX_REG_CORBSIZE 0x4e + +#define AZX_REG_RIRBLBASE 0x50 +#define AZX_REG_RIRBUBASE 0x54 +#define AZX_REG_RIRBWP 0x58 +#define AZX_RIRBWP_RST (1 << 15) /* write pointer reset */ +#define AZX_REG_RINTCNT 0x5a +#define AZX_REG_RIRBCTL 0x5c +#define AZX_RBCTL_IRQ_EN (1 << 0) /* enable IRQ */ +#define AZX_RBCTL_DMA_EN (1 << 1) /* enable DMA */ +#define AZX_RBCTL_OVERRUN_EN (1 << 2) /* enable overrun irq */ +#define AZX_REG_RIRBSTS 0x5d +#define AZX_RBSTS_IRQ (1 << 0) /* response irq */ +#define AZX_RBSTS_OVERRUN (1 << 2) /* overrun irq */ +#define AZX_REG_RIRBSIZE 0x5e + +#define AZX_REG_IC 0x60 +#define AZX_REG_IR 0x64 +#define AZX_REG_IRS 0x68 +#define AZX_IRS_VALID (1<<1) +#define AZX_IRS_BUSY (1<<0) + +#define AZX_REG_DPLBASE 0x70 +#define AZX_REG_DPUBASE 0x74 +#define AZX_DPLBASE_ENABLE 0x1 /* Enable position buffer */ + +/* SD offset: SDI0=0x80, SDI1=0xa0, ... SDO3=0x160 */ +enum { SDI0, SDI1, SDI2, SDI3, SDO0, SDO1, SDO2, SDO3 }; + +/* stream register offsets from stream base */ +#define AZX_REG_SD_CTL 0x00 +#define AZX_REG_SD_CTL_3B 0x02 /* 3rd byte of SD_CTL register */ +#define AZX_REG_SD_STS 0x03 +#define AZX_REG_SD_LPIB 0x04 +#define AZX_REG_SD_CBL 0x08 +#define AZX_REG_SD_LVI 0x0c +#define AZX_REG_SD_FIFOW 0x0e +#define AZX_REG_SD_FIFOSIZE 0x10 +#define AZX_REG_SD_FORMAT 0x12 +#define AZX_REG_SD_FIFOL 0x14 +#define AZX_REG_SD_BDLPL 0x18 +#define AZX_REG_SD_BDLPU 0x1c + +/* GTS registers */ +#define AZX_REG_LLCH 0x14 + +#define AZX_REG_GTS_BASE 0x520 + +#define AZX_REG_GTSCC (AZX_REG_GTS_BASE + 0x00) +#define AZX_REG_WALFCC (AZX_REG_GTS_BASE + 0x04) +#define AZX_REG_TSCCL (AZX_REG_GTS_BASE + 0x08) +#define AZX_REG_TSCCU (AZX_REG_GTS_BASE + 0x0C) +#define AZX_REG_LLPFOC (AZX_REG_GTS_BASE + 0x14) +#define AZX_REG_LLPCL (AZX_REG_GTS_BASE + 0x18) +#define AZX_REG_LLPCU (AZX_REG_GTS_BASE + 0x1C) + +/* Haswell/Broadwell display HD-A controller Extended Mode registers */ +#define AZX_REG_HSW_EM4 0x100c +#define AZX_REG_HSW_EM5 0x1010 + +/* Skylake/Broxton vendor-specific registers */ +#define AZX_REG_VS_EM1 0x1000 +#define AZX_REG_VS_INRC 0x1004 +#define AZX_REG_VS_OUTRC 0x1008 +#define AZX_REG_VS_FIFOTRK 0x100C +#define AZX_REG_VS_FIFOTRK2 0x1010 +#define AZX_REG_VS_EM2 0x1030 +#define AZX_REG_VS_EM3L 0x1038 +#define AZX_REG_VS_EM3U 0x103C +#define AZX_REG_VS_EM4L 0x1040 +#define AZX_REG_VS_EM4U 0x1044 +#define AZX_REG_VS_LTRP 0x1048 +#define AZX_REG_VS_D0I3C 0x104A +#define AZX_REG_VS_PCE 0x104B +#define AZX_REG_VS_L2MAGC 0x1050 +#define AZX_REG_VS_L2LAHPT 0x1054 +#define AZX_REG_VS_SDXDPIB_XBASE 0x1084 +#define AZX_REG_VS_SDXDPIB_XINTERVAL 0x20 +#define AZX_REG_VS_SDXEFIFOS_XBASE 0x1094 +#define AZX_REG_VS_SDXEFIFOS_XINTERVAL 0x20 + +/* PCI space */ +#define AZX_PCIREG_TCSEL 0x44 + +/* + * other constants + */ + +/* max number of fragments - we may use more if allocating more pages for BDL */ +#define BDL_SIZE 4096 +#define AZX_MAX_BDL_ENTRIES (BDL_SIZE / 16) +#define AZX_MAX_FRAG 32 +/* max buffer size - no h/w limit, you can increase as you like */ +#define AZX_MAX_BUF_SIZE (1024*1024*1024) + +/* RIRB int mask: overrun[2], response[0] */ +#define RIRB_INT_RESPONSE 0x01 +#define RIRB_INT_OVERRUN 0x04 +#define RIRB_INT_MASK 0x05 + +/* STATESTS int mask: S3,SD2,SD1,SD0 */ +#define STATESTS_INT_MASK ((1 << HDA_MAX_CODECS) - 1) + +/* SD_CTL bits */ +#define SD_CTL_STREAM_RESET 0x01 /* stream reset bit */ +#define SD_CTL_DMA_START 0x02 /* stream DMA start bit */ +#define SD_CTL_STRIPE (3 << 16) /* stripe control */ +#define SD_CTL_TRAFFIC_PRIO (1 << 18) /* traffic priority */ +#define SD_CTL_DIR (1 << 19) /* bi-directional stream */ +#define SD_CTL_STREAM_TAG_MASK (0xf << 20) +#define SD_CTL_STREAM_TAG_SHIFT 20 + +/* SD_CTL and SD_STS */ +#define SD_INT_DESC_ERR 0x10 /* descriptor error interrupt */ +#define SD_INT_FIFO_ERR 0x08 /* FIFO error interrupt */ +#define SD_INT_COMPLETE 0x04 /* completion interrupt */ +#define SD_INT_MASK (SD_INT_DESC_ERR|SD_INT_FIFO_ERR|\ + SD_INT_COMPLETE) +#define SD_CTL_STRIPE_MASK 0x3 /* stripe control mask */ + +/* SD_STS */ +#define SD_STS_FIFO_READY 0x20 /* FIFO ready */ + +/* INTCTL and INTSTS */ +#define AZX_INT_ALL_STREAM 0xff /* all stream interrupts */ +#define AZX_INT_CTRL_EN 0x40000000 /* controller interrupt enable bit */ +#define AZX_INT_GLOBAL_EN 0x80000000 /* global interrupt enable bit */ + +/* below are so far hardcoded - should read registers in future */ +#define AZX_MAX_CORB_ENTRIES 256 +#define AZX_MAX_RIRB_ENTRIES 256 + +/* Capability header Structure */ +#define AZX_REG_CAP_HDR 0x0 +#define AZX_CAP_HDR_VER_OFF 28 +#define AZX_CAP_HDR_VER_MASK (0xF << AZX_CAP_HDR_VER_OFF) +#define AZX_CAP_HDR_ID_OFF 16 +#define AZX_CAP_HDR_ID_MASK (0xFFF << AZX_CAP_HDR_ID_OFF) +#define AZX_CAP_HDR_NXT_PTR_MASK 0xFFFF + +/* registers of Software Position Based FIFO Capability Structure */ +#define AZX_SPB_CAP_ID 0x4 +#define AZX_REG_SPB_BASE_ADDR 0x700 +#define AZX_REG_SPB_SPBFCH 0x00 +#define AZX_REG_SPB_SPBFCCTL 0x04 +/* Base used to calculate the iterating register offset */ +#define AZX_SPB_BASE 0x08 +/* Interval used to calculate the iterating register offset */ +#define AZX_SPB_INTERVAL 0x08 +/* SPIB base */ +#define AZX_SPB_SPIB 0x00 +/* SPIB MAXFIFO base*/ +#define AZX_SPB_MAXFIFO 0x04 + +/* registers of Global Time Synchronization Capability Structure */ +#define AZX_GTS_CAP_ID 0x1 +#define AZX_REG_GTS_GTSCH 0x00 +#define AZX_REG_GTS_GTSCD 0x04 +#define AZX_REG_GTS_GTSCTLAC 0x0C +#define AZX_GTS_BASE 0x20 +#define AZX_GTS_INTERVAL 0x20 + +/* registers for Processing Pipe Capability Structure */ +#define AZX_PP_CAP_ID 0x3 +#define AZX_REG_PP_PPCH 0x10 +#define AZX_REG_PP_PPCTL 0x04 +#define AZX_PPCTL_PIE (1<<31) +#define AZX_PPCTL_GPROCEN (1<<30) +/* _X_ = dma engine # and cannot * exceed 29 (per spec max 30 dma engines) */ +#define AZX_PPCTL_PROCEN(_X_) (1<<(_X_)) + +#define AZX_REG_PP_PPSTS 0x08 + +#define AZX_PPHC_BASE 0x10 +#define AZX_PPHC_INTERVAL 0x10 + +#define AZX_REG_PPHCLLPL 0x0 +#define AZX_REG_PPHCLLPU 0x4 +#define AZX_REG_PPHCLDPL 0x8 +#define AZX_REG_PPHCLDPU 0xC + +#define AZX_PPLC_BASE 0x10 +#define AZX_PPLC_MULTI 0x10 +#define AZX_PPLC_INTERVAL 0x10 + +#define AZX_REG_PPLCCTL 0x0 +#define AZX_PPLCCTL_STRM_BITS 4 +#define AZX_PPLCCTL_STRM_SHIFT 20 +#define AZX_REG_MASK(bit_num, offset) \ + (((1 << (bit_num)) - 1) << (offset)) +#define AZX_PPLCCTL_STRM_MASK \ + AZX_REG_MASK(AZX_PPLCCTL_STRM_BITS, AZX_PPLCCTL_STRM_SHIFT) +#define AZX_PPLCCTL_RUN (1<<1) +#define AZX_PPLCCTL_STRST (1<<0) + +#define AZX_REG_PPLCFMT 0x4 +#define AZX_REG_PPLCLLPL 0x8 +#define AZX_REG_PPLCLLPU 0xC + +/* registers for Multiple Links Capability Structure */ +#define AZX_ML_CAP_ID 0x2 +#define AZX_REG_ML_MLCH 0x00 +#define AZX_REG_ML_MLCD 0x04 +#define AZX_ML_BASE 0x40 +#define AZX_ML_INTERVAL 0x40 + +#define AZX_REG_ML_LCAP 0x00 +#define AZX_REG_ML_LCTL 0x04 +#define AZX_REG_ML_LOSIDV 0x08 +#define AZX_REG_ML_LSDIID 0x0C +#define AZX_REG_ML_LPSOO 0x10 +#define AZX_REG_ML_LPSIO 0x12 +#define AZX_REG_ML_LWALFC 0x18 +#define AZX_REG_ML_LOUTPAY 0x20 +#define AZX_REG_ML_LINPAY 0x30 + +/* bit0 is reserved, with BIT(1) mapping to stream1 */ +#define ML_LOSIDV_STREAM_MASK 0xFFFE + +#define ML_LCTL_SCF_MASK 0xF +#define AZX_MLCTL_SPA (0x1 << 16) +#define AZX_MLCTL_CPA (0x1 << 23) +#define AZX_MLCTL_SPA_SHIFT 16 +#define AZX_MLCTL_CPA_SHIFT 23 + +/* registers for DMA Resume Capability Structure */ +#define AZX_DRSM_CAP_ID 0x5 +#define AZX_REG_DRSM_CTL 0x4 +/* Base used to calculate the iterating register offset */ +#define AZX_DRSM_BASE 0x08 +/* Interval used to calculate the iterating register offset */ +#define AZX_DRSM_INTERVAL 0x08 + +/* Global time synchronization registers */ +#define GTSCC_TSCCD_MASK 0x80000000 +#define GTSCC_TSCCD_SHIFT BIT(31) +#define GTSCC_TSCCI_MASK 0x20 +#define GTSCC_CDMAS_DMA_DIR_SHIFT 4 + +#define WALFCC_CIF_MASK 0x1FF +#define WALFCC_FN_SHIFT 9 +#define HDA_CLK_CYCLES_PER_FRAME 512 + +/* + * An error occurs near frame "rollover". The clocks in frame value indicates + * whether this error may have occurred. Here we use the value of 10. Please + * see the errata for the right number [<10] + */ +#define HDA_MAX_CYCLE_VALUE 499 +#define HDA_MAX_CYCLE_OFFSET 10 +#define HDA_MAX_CYCLE_READ_RETRY 10 + +#define TSCCU_CCU_SHIFT 32 +#define LLPC_CCU_SHIFT 32 + + +/* + * helpers to read the stream position + */ +static inline unsigned int +snd_hdac_stream_get_pos_lpib(struct hdac_stream *stream) +{ + return snd_hdac_stream_readl(stream, SD_LPIB); +} + +static inline unsigned int +snd_hdac_stream_get_pos_posbuf(struct hdac_stream *stream) +{ + return le32_to_cpu(*stream->posbuf); +} + +#endif /* __SOUND_HDA_REGISTER_H */ |