diff options
Diffstat (limited to '')
| -rw-r--r-- | include/sound/sof/header.h | 199 |
1 files changed, 199 insertions, 0 deletions
diff --git a/include/sound/sof/header.h b/include/sound/sof/header.h new file mode 100644 index 000000000..2d35997ac --- /dev/null +++ b/include/sound/sof/header.h @@ -0,0 +1,199 @@ +/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-3-Clause) */ +/* + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * Copyright(c) 2018 Intel Corporation. All rights reserved. + */ + +#ifndef __INCLUDE_SOUND_SOF_HEADER_H__ +#define __INCLUDE_SOUND_SOF_HEADER_H__ + +#include <linux/types.h> +#include <uapi/sound/sof/abi.h> + +/** \addtogroup sof_uapi uAPI + * SOF uAPI specification. + * @{ + */ + +/* + * IPC messages have a prefixed 32 bit identifier made up as follows :- + * + * 0xGCCCNNNN where + * G is global cmd type (4 bits) + * C is command type (12 bits) + * I is the ID number (16 bits) - monotonic and overflows + * + * This is sent at the start of the IPM message in the mailbox. Messages should + * not be sent in the doorbell (special exceptions for firmware . + */ + +/* Global Message - Generic */ +#define SOF_GLB_TYPE_SHIFT 28 +#define SOF_GLB_TYPE_MASK (0xf << SOF_GLB_TYPE_SHIFT) +#define SOF_GLB_TYPE(x) ((x) << SOF_GLB_TYPE_SHIFT) + +/* Command Message - Generic */ +#define SOF_CMD_TYPE_SHIFT 16 +#define SOF_CMD_TYPE_MASK (0xfff << SOF_CMD_TYPE_SHIFT) +#define SOF_CMD_TYPE(x) ((x) << SOF_CMD_TYPE_SHIFT) + +/* Global Message Types */ +#define SOF_IPC_GLB_REPLY SOF_GLB_TYPE(0x1U) +#define SOF_IPC_GLB_COMPOUND SOF_GLB_TYPE(0x2U) +#define SOF_IPC_GLB_TPLG_MSG SOF_GLB_TYPE(0x3U) +#define SOF_IPC_GLB_PM_MSG SOF_GLB_TYPE(0x4U) +#define SOF_IPC_GLB_COMP_MSG SOF_GLB_TYPE(0x5U) +#define SOF_IPC_GLB_STREAM_MSG SOF_GLB_TYPE(0x6U) +#define SOF_IPC_FW_READY SOF_GLB_TYPE(0x7U) +#define SOF_IPC_GLB_DAI_MSG SOF_GLB_TYPE(0x8U) +#define SOF_IPC_GLB_TRACE_MSG SOF_GLB_TYPE(0x9U) +#define SOF_IPC_GLB_GDB_DEBUG SOF_GLB_TYPE(0xAU) +#define SOF_IPC_GLB_TEST_MSG SOF_GLB_TYPE(0xBU) +#define SOF_IPC_GLB_PROBE SOF_GLB_TYPE(0xCU) + +/* + * DSP Command Message Types + */ + +/* topology */ +#define SOF_IPC_TPLG_COMP_NEW SOF_CMD_TYPE(0x001) +#define SOF_IPC_TPLG_COMP_FREE SOF_CMD_TYPE(0x002) +#define SOF_IPC_TPLG_COMP_CONNECT SOF_CMD_TYPE(0x003) +#define SOF_IPC_TPLG_PIPE_NEW SOF_CMD_TYPE(0x010) +#define SOF_IPC_TPLG_PIPE_FREE SOF_CMD_TYPE(0x011) +#define SOF_IPC_TPLG_PIPE_CONNECT SOF_CMD_TYPE(0x012) +#define SOF_IPC_TPLG_PIPE_COMPLETE SOF_CMD_TYPE(0x013) +#define SOF_IPC_TPLG_BUFFER_NEW SOF_CMD_TYPE(0x020) +#define SOF_IPC_TPLG_BUFFER_FREE SOF_CMD_TYPE(0x021) + +/* PM */ +#define SOF_IPC_PM_CTX_SAVE SOF_CMD_TYPE(0x001) +#define SOF_IPC_PM_CTX_RESTORE SOF_CMD_TYPE(0x002) +#define SOF_IPC_PM_CTX_SIZE SOF_CMD_TYPE(0x003) +#define SOF_IPC_PM_CLK_SET SOF_CMD_TYPE(0x004) +#define SOF_IPC_PM_CLK_GET SOF_CMD_TYPE(0x005) +#define SOF_IPC_PM_CLK_REQ SOF_CMD_TYPE(0x006) +#define SOF_IPC_PM_CORE_ENABLE SOF_CMD_TYPE(0x007) +#define SOF_IPC_PM_GATE SOF_CMD_TYPE(0x008) + +/* component runtime config - multiple different types */ +#define SOF_IPC_COMP_SET_VALUE SOF_CMD_TYPE(0x001) +#define SOF_IPC_COMP_GET_VALUE SOF_CMD_TYPE(0x002) +#define SOF_IPC_COMP_SET_DATA SOF_CMD_TYPE(0x003) +#define SOF_IPC_COMP_GET_DATA SOF_CMD_TYPE(0x004) +#define SOF_IPC_COMP_NOTIFICATION SOF_CMD_TYPE(0x005) + +/* DAI messages */ +#define SOF_IPC_DAI_CONFIG SOF_CMD_TYPE(0x001) +#define SOF_IPC_DAI_LOOPBACK SOF_CMD_TYPE(0x002) + +/* stream */ +#define SOF_IPC_STREAM_PCM_PARAMS SOF_CMD_TYPE(0x001) +#define SOF_IPC_STREAM_PCM_PARAMS_REPLY SOF_CMD_TYPE(0x002) +#define SOF_IPC_STREAM_PCM_FREE SOF_CMD_TYPE(0x003) +#define SOF_IPC_STREAM_TRIG_START SOF_CMD_TYPE(0x004) +#define SOF_IPC_STREAM_TRIG_STOP SOF_CMD_TYPE(0x005) +#define SOF_IPC_STREAM_TRIG_PAUSE SOF_CMD_TYPE(0x006) +#define SOF_IPC_STREAM_TRIG_RELEASE SOF_CMD_TYPE(0x007) +#define SOF_IPC_STREAM_TRIG_DRAIN SOF_CMD_TYPE(0x008) +#define SOF_IPC_STREAM_TRIG_XRUN SOF_CMD_TYPE(0x009) +#define SOF_IPC_STREAM_POSITION SOF_CMD_TYPE(0x00a) +#define SOF_IPC_STREAM_VORBIS_PARAMS SOF_CMD_TYPE(0x010) +#define SOF_IPC_STREAM_VORBIS_FREE SOF_CMD_TYPE(0x011) + +/* probe */ +#define SOF_IPC_PROBE_INIT SOF_CMD_TYPE(0x001) +#define SOF_IPC_PROBE_DEINIT SOF_CMD_TYPE(0x002) +#define SOF_IPC_PROBE_DMA_ADD SOF_CMD_TYPE(0x003) +#define SOF_IPC_PROBE_DMA_INFO SOF_CMD_TYPE(0x004) +#define SOF_IPC_PROBE_DMA_REMOVE SOF_CMD_TYPE(0x005) +#define SOF_IPC_PROBE_POINT_ADD SOF_CMD_TYPE(0x006) +#define SOF_IPC_PROBE_POINT_INFO SOF_CMD_TYPE(0x007) +#define SOF_IPC_PROBE_POINT_REMOVE SOF_CMD_TYPE(0x008) + +/* trace */ +#define SOF_IPC_TRACE_DMA_PARAMS SOF_CMD_TYPE(0x001) +#define SOF_IPC_TRACE_DMA_POSITION SOF_CMD_TYPE(0x002) +#define SOF_IPC_TRACE_DMA_PARAMS_EXT SOF_CMD_TYPE(0x003) + +/* debug */ +#define SOF_IPC_TEST_IPC_FLOOD SOF_CMD_TYPE(0x001) + +/* Get message component id */ +#define SOF_IPC_MESSAGE_ID(x) ((x) & 0xffff) + +/* maximum message size for mailbox Tx/Rx */ +#define SOF_IPC_MSG_MAX_SIZE 384 + +/* + * Structure Header - Header for all IPC structures except command structs. + * The size can be greater than the structure size and that means there is + * extended bespoke data beyond the end of the structure including variable + * arrays. + */ + +struct sof_ipc_hdr { + uint32_t size; /**< size of structure */ +} __packed; + +/* + * Command Header - Header for all IPC commands. Identifies IPC message. + * The size can be greater than the structure size and that means there is + * extended bespoke data beyond the end of the structure including variable + * arrays. + */ + +struct sof_ipc_cmd_hdr { + uint32_t size; /**< size of structure */ + uint32_t cmd; /**< SOF_IPC_GLB_ + cmd */ +} __packed; + +/* + * Generic reply message. Some commands override this with their own reply + * types that must include this at start. + */ +struct sof_ipc_reply { + struct sof_ipc_cmd_hdr hdr; + int32_t error; /**< negative error numbers */ +} __packed; + +/* + * Compound commands - SOF_IPC_GLB_COMPOUND. + * + * Compound commands are sent to the DSP as a single IPC operation. The + * commands are split into blocks and each block has a header. This header + * identifies the command type and the number of commands before the next + * header. + */ + +struct sof_ipc_compound_hdr { + struct sof_ipc_cmd_hdr hdr; + uint32_t count; /**< count of 0 means end of compound sequence */ +} __packed; + +/** + * OOPS header architecture specific data. + */ +struct sof_ipc_dsp_oops_arch_hdr { + uint32_t arch; /* Identifier of architecture */ + uint32_t totalsize; /* Total size of oops message */ +} __packed; + +/** + * OOPS header platform specific data. + */ +struct sof_ipc_dsp_oops_plat_hdr { + uint32_t configidhi; /* ConfigID hi 32bits */ + uint32_t configidlo; /* ConfigID lo 32bits */ + uint32_t numaregs; /* Special regs num */ + uint32_t stackoffset; /* Offset to stack pointer from beginning of + * oops message + */ + uint32_t stackptr; /* Stack ptr */ +} __packed; + +/** @}*/ + +#endif |