summaryrefslogtreecommitdiffstats
path: root/kernel/rseq.c
diff options
context:
space:
mode:
Diffstat (limited to '')
-rw-r--r--kernel/rseq.c382
1 files changed, 382 insertions, 0 deletions
diff --git a/kernel/rseq.c b/kernel/rseq.c
new file mode 100644
index 000000000..6ca29dddc
--- /dev/null
+++ b/kernel/rseq.c
@@ -0,0 +1,382 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Restartable sequences system call
+ *
+ * Copyright (C) 2015, Google, Inc.,
+ * Paul Turner <pjt@google.com> and Andrew Hunter <ahh@google.com>
+ * Copyright (C) 2015-2018, EfficiOS Inc.,
+ * Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
+ */
+
+#include <linux/sched.h>
+#include <linux/uaccess.h>
+#include <linux/syscalls.h>
+#include <linux/rseq.h>
+#include <linux/types.h>
+#include <asm/ptrace.h>
+
+#define CREATE_TRACE_POINTS
+#include <trace/events/rseq.h>
+
+#define RSEQ_CS_PREEMPT_MIGRATE_FLAGS (RSEQ_CS_FLAG_NO_RESTART_ON_MIGRATE | \
+ RSEQ_CS_FLAG_NO_RESTART_ON_PREEMPT)
+
+/*
+ *
+ * Restartable sequences are a lightweight interface that allows
+ * user-level code to be executed atomically relative to scheduler
+ * preemption and signal delivery. Typically used for implementing
+ * per-cpu operations.
+ *
+ * It allows user-space to perform update operations on per-cpu data
+ * without requiring heavy-weight atomic operations.
+ *
+ * Detailed algorithm of rseq user-space assembly sequences:
+ *
+ * init(rseq_cs)
+ * cpu = TLS->rseq::cpu_id_start
+ * [1] TLS->rseq::rseq_cs = rseq_cs
+ * [start_ip] ----------------------------
+ * [2] if (cpu != TLS->rseq::cpu_id)
+ * goto abort_ip;
+ * [3] <last_instruction_in_cs>
+ * [post_commit_ip] ----------------------------
+ *
+ * The address of jump target abort_ip must be outside the critical
+ * region, i.e.:
+ *
+ * [abort_ip] < [start_ip] || [abort_ip] >= [post_commit_ip]
+ *
+ * Steps [2]-[3] (inclusive) need to be a sequence of instructions in
+ * userspace that can handle being interrupted between any of those
+ * instructions, and then resumed to the abort_ip.
+ *
+ * 1. Userspace stores the address of the struct rseq_cs assembly
+ * block descriptor into the rseq_cs field of the registered
+ * struct rseq TLS area. This update is performed through a single
+ * store within the inline assembly instruction sequence.
+ * [start_ip]
+ *
+ * 2. Userspace tests to check whether the current cpu_id field match
+ * the cpu number loaded before start_ip, branching to abort_ip
+ * in case of a mismatch.
+ *
+ * If the sequence is preempted or interrupted by a signal
+ * at or after start_ip and before post_commit_ip, then the kernel
+ * clears TLS->__rseq_abi::rseq_cs, and sets the user-space return
+ * ip to abort_ip before returning to user-space, so the preempted
+ * execution resumes at abort_ip.
+ *
+ * 3. Userspace critical section final instruction before
+ * post_commit_ip is the commit. The critical section is
+ * self-terminating.
+ * [post_commit_ip]
+ *
+ * 4. <success>
+ *
+ * On failure at [2], or if interrupted by preempt or signal delivery
+ * between [1] and [3]:
+ *
+ * [abort_ip]
+ * F1. <failure>
+ */
+
+static int rseq_update_cpu_id(struct task_struct *t)
+{
+ u32 cpu_id = raw_smp_processor_id();
+
+ if (put_user(cpu_id, &t->rseq->cpu_id_start))
+ return -EFAULT;
+ if (put_user(cpu_id, &t->rseq->cpu_id))
+ return -EFAULT;
+ trace_rseq_update(t);
+ return 0;
+}
+
+static int rseq_reset_rseq_cpu_id(struct task_struct *t)
+{
+ u32 cpu_id_start = 0, cpu_id = RSEQ_CPU_ID_UNINITIALIZED;
+
+ /*
+ * Reset cpu_id_start to its initial state (0).
+ */
+ if (put_user(cpu_id_start, &t->rseq->cpu_id_start))
+ return -EFAULT;
+ /*
+ * Reset cpu_id to RSEQ_CPU_ID_UNINITIALIZED, so any user coming
+ * in after unregistration can figure out that rseq needs to be
+ * registered again.
+ */
+ if (put_user(cpu_id, &t->rseq->cpu_id))
+ return -EFAULT;
+ return 0;
+}
+
+static int rseq_get_rseq_cs(struct task_struct *t, struct rseq_cs *rseq_cs)
+{
+ struct rseq_cs __user *urseq_cs;
+ u64 ptr;
+ u32 __user *usig;
+ u32 sig;
+ int ret;
+
+#ifdef CONFIG_64BIT
+ if (get_user(ptr, &t->rseq->rseq_cs))
+ return -EFAULT;
+#else
+ if (copy_from_user(&ptr, &t->rseq->rseq_cs, sizeof(ptr)))
+ return -EFAULT;
+#endif
+ if (!ptr) {
+ memset(rseq_cs, 0, sizeof(*rseq_cs));
+ return 0;
+ }
+ if (ptr >= TASK_SIZE)
+ return -EINVAL;
+ urseq_cs = (struct rseq_cs __user *)(unsigned long)ptr;
+ if (copy_from_user(rseq_cs, urseq_cs, sizeof(*rseq_cs)))
+ return -EFAULT;
+
+ if (rseq_cs->start_ip >= TASK_SIZE ||
+ rseq_cs->start_ip + rseq_cs->post_commit_offset >= TASK_SIZE ||
+ rseq_cs->abort_ip >= TASK_SIZE ||
+ rseq_cs->version > 0)
+ return -EINVAL;
+ /* Check for overflow. */
+ if (rseq_cs->start_ip + rseq_cs->post_commit_offset < rseq_cs->start_ip)
+ return -EINVAL;
+ /* Ensure that abort_ip is not in the critical section. */
+ if (rseq_cs->abort_ip - rseq_cs->start_ip < rseq_cs->post_commit_offset)
+ return -EINVAL;
+
+ usig = (u32 __user *)(unsigned long)(rseq_cs->abort_ip - sizeof(u32));
+ ret = get_user(sig, usig);
+ if (ret)
+ return ret;
+
+ if (current->rseq_sig != sig) {
+ printk_ratelimited(KERN_WARNING
+ "Possible attack attempt. Unexpected rseq signature 0x%x, expecting 0x%x (pid=%d, addr=%p).\n",
+ sig, current->rseq_sig, current->pid, usig);
+ return -EINVAL;
+ }
+ return 0;
+}
+
+static int rseq_need_restart(struct task_struct *t, u32 cs_flags)
+{
+ u32 flags, event_mask;
+ int ret;
+
+ /* Get thread flags. */
+ ret = get_user(flags, &t->rseq->flags);
+ if (ret)
+ return ret;
+
+ /* Take critical section flags into account. */
+ flags |= cs_flags;
+
+ /*
+ * Restart on signal can only be inhibited when restart on
+ * preempt and restart on migrate are inhibited too. Otherwise,
+ * a preempted signal handler could fail to restart the prior
+ * execution context on sigreturn.
+ */
+ if (unlikely((flags & RSEQ_CS_FLAG_NO_RESTART_ON_SIGNAL) &&
+ (flags & RSEQ_CS_PREEMPT_MIGRATE_FLAGS) !=
+ RSEQ_CS_PREEMPT_MIGRATE_FLAGS))
+ return -EINVAL;
+
+ /*
+ * Load and clear event mask atomically with respect to
+ * scheduler preemption.
+ */
+ preempt_disable();
+ event_mask = t->rseq_event_mask;
+ t->rseq_event_mask = 0;
+ preempt_enable();
+
+ return !!(event_mask & ~flags);
+}
+
+static int clear_rseq_cs(struct task_struct *t)
+{
+ /*
+ * The rseq_cs field is set to NULL on preemption or signal
+ * delivery on top of rseq assembly block, as well as on top
+ * of code outside of the rseq assembly block. This performs
+ * a lazy clear of the rseq_cs field.
+ *
+ * Set rseq_cs to NULL.
+ */
+#ifdef CONFIG_64BIT
+ return put_user(0UL, &t->rseq->rseq_cs);
+#else
+ if (clear_user(&t->rseq->rseq_cs, sizeof(t->rseq->rseq_cs)))
+ return -EFAULT;
+ return 0;
+#endif
+}
+
+/*
+ * Unsigned comparison will be true when ip >= start_ip, and when
+ * ip < start_ip + post_commit_offset.
+ */
+static bool in_rseq_cs(unsigned long ip, struct rseq_cs *rseq_cs)
+{
+ return ip - rseq_cs->start_ip < rseq_cs->post_commit_offset;
+}
+
+static int rseq_ip_fixup(struct pt_regs *regs)
+{
+ unsigned long ip = instruction_pointer(regs);
+ struct task_struct *t = current;
+ struct rseq_cs rseq_cs;
+ int ret;
+
+ ret = rseq_get_rseq_cs(t, &rseq_cs);
+ if (ret)
+ return ret;
+
+ /*
+ * Handle potentially not being within a critical section.
+ * If not nested over a rseq critical section, restart is useless.
+ * Clear the rseq_cs pointer and return.
+ */
+ if (!in_rseq_cs(ip, &rseq_cs))
+ return clear_rseq_cs(t);
+ ret = rseq_need_restart(t, rseq_cs.flags);
+ if (ret <= 0)
+ return ret;
+ ret = clear_rseq_cs(t);
+ if (ret)
+ return ret;
+ trace_rseq_ip_fixup(ip, rseq_cs.start_ip, rseq_cs.post_commit_offset,
+ rseq_cs.abort_ip);
+ instruction_pointer_set(regs, (unsigned long)rseq_cs.abort_ip);
+ return 0;
+}
+
+/*
+ * This resume handler must always be executed between any of:
+ * - preemption,
+ * - signal delivery,
+ * and return to user-space.
+ *
+ * This is how we can ensure that the entire rseq critical section
+ * will issue the commit instruction only if executed atomically with
+ * respect to other threads scheduled on the same CPU, and with respect
+ * to signal handlers.
+ */
+void __rseq_handle_notify_resume(struct ksignal *ksig, struct pt_regs *regs)
+{
+ struct task_struct *t = current;
+ int ret, sig;
+
+ if (unlikely(t->flags & PF_EXITING))
+ return;
+ if (unlikely(!access_ok(t->rseq, sizeof(*t->rseq))))
+ goto error;
+ /*
+ * regs is NULL if and only if the caller is in a syscall path. Skip
+ * fixup and leave rseq_cs as is so that rseq_sycall() will detect and
+ * kill a misbehaving userspace on debug kernels.
+ */
+ if (regs) {
+ ret = rseq_ip_fixup(regs);
+ if (unlikely(ret < 0))
+ goto error;
+ }
+ if (unlikely(rseq_update_cpu_id(t)))
+ goto error;
+ return;
+
+error:
+ sig = ksig ? ksig->sig : 0;
+ force_sigsegv(sig);
+}
+
+#ifdef CONFIG_DEBUG_RSEQ
+
+/*
+ * Terminate the process if a syscall is issued within a restartable
+ * sequence.
+ */
+void rseq_syscall(struct pt_regs *regs)
+{
+ unsigned long ip = instruction_pointer(regs);
+ struct task_struct *t = current;
+ struct rseq_cs rseq_cs;
+
+ if (!t->rseq)
+ return;
+ if (!access_ok(t->rseq, sizeof(*t->rseq)) ||
+ rseq_get_rseq_cs(t, &rseq_cs) || in_rseq_cs(ip, &rseq_cs))
+ force_sig(SIGSEGV);
+}
+
+#endif
+
+/*
+ * sys_rseq - setup restartable sequences for caller thread.
+ */
+SYSCALL_DEFINE4(rseq, struct rseq __user *, rseq, u32, rseq_len,
+ int, flags, u32, sig)
+{
+ int ret;
+
+ if (flags & RSEQ_FLAG_UNREGISTER) {
+ if (flags & ~RSEQ_FLAG_UNREGISTER)
+ return -EINVAL;
+ /* Unregister rseq for current thread. */
+ if (current->rseq != rseq || !current->rseq)
+ return -EINVAL;
+ if (rseq_len != sizeof(*rseq))
+ return -EINVAL;
+ if (current->rseq_sig != sig)
+ return -EPERM;
+ ret = rseq_reset_rseq_cpu_id(current);
+ if (ret)
+ return ret;
+ current->rseq = NULL;
+ current->rseq_sig = 0;
+ return 0;
+ }
+
+ if (unlikely(flags))
+ return -EINVAL;
+
+ if (current->rseq) {
+ /*
+ * If rseq is already registered, check whether
+ * the provided address differs from the prior
+ * one.
+ */
+ if (current->rseq != rseq || rseq_len != sizeof(*rseq))
+ return -EINVAL;
+ if (current->rseq_sig != sig)
+ return -EPERM;
+ /* Already registered. */
+ return -EBUSY;
+ }
+
+ /*
+ * If there was no rseq previously registered,
+ * ensure the provided rseq is properly aligned and valid.
+ */
+ if (!IS_ALIGNED((unsigned long)rseq, __alignof__(*rseq)) ||
+ rseq_len != sizeof(*rseq))
+ return -EINVAL;
+ if (!access_ok(rseq, rseq_len))
+ return -EFAULT;
+ current->rseq = rseq;
+ current->rseq_sig = sig;
+ /*
+ * If rseq was previously inactive, and has just been
+ * registered, ensure the cpu_id_start and cpu_id fields
+ * are updated before returning to user-space.
+ */
+ rseq_set_notify_resume(current);
+
+ return 0;
+}
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-01 00:56:59 +0000