1 files changed, 131 insertions, 0 deletions
diff --git a/net/dsa/Kconfig b/net/dsa/Kconfig
new file mode 100644
index 000000000..1f9b9b110
--- /dev/null
+++ b/net/dsa/Kconfig
@@ -0,0 +1,131 @@
+# SPDX-License-Identifier: GPL-2.0-only
+config HAVE_NET_DSA
+	def_bool y
+	depends on INET && NETDEVICES && !S390
+
+# Drivers must select NET_DSA and the appropriate tagging format
+
+menuconfig NET_DSA
+	tristate "Distributed Switch Architecture"
+	depends on HAVE_NET_DSA
+	depends on BRIDGE || BRIDGE=n
+	select GRO_CELLS
+	select NET_SWITCHDEV
+	select PHYLINK
+	select NET_DEVLINK
+	help
+	  Say Y if you want to enable support for the hardware switches supported
+	  by the Distributed Switch Architecture.
+
+if NET_DSA
+
+# tagging formats
+config NET_DSA_TAG_8021Q
+	tristate
+	select VLAN_8021Q
+	help
+	  Unlike the other tagging protocols, the 802.1Q config option simply
+	  provides helpers for other tagging implementations that might rely on
+	  VLAN in one way or another. It is not a complete solution.
+
+	  Drivers which use these helpers should select this as dependency.
+
+config NET_DSA_TAG_AR9331
+	tristate "Tag driver for Atheros AR9331 SoC with built-in switch"
+	help
+	  Say Y or M if you want to enable support for tagging frames for
+	  the Atheros AR9331 SoC with built-in switch.
+
+config NET_DSA_TAG_BRCM_COMMON
+	tristate
+	default n
+
+config NET_DSA_TAG_BRCM
+	tristate "Tag driver for Broadcom switches using in-frame headers"
+	select NET_DSA_TAG_BRCM_COMMON
+	help
+	  Say Y if you want to enable support for tagging frames for the
+	  Broadcom switches which place the tag after the MAC source address.
+
+
+config NET_DSA_TAG_BRCM_PREPEND
+	tristate "Tag driver for Broadcom switches using prepended headers"
+	select NET_DSA_TAG_BRCM_COMMON
+	help
+	  Say Y if you want to enable support for tagging frames for the
+	  Broadcom switches which places the tag before the Ethernet header
+	  (prepended).
+
+config NET_DSA_TAG_GSWIP
+	tristate "Tag driver for Lantiq / Intel GSWIP switches"
+	help
+	  Say Y or M if you want to enable support for tagging frames for the
+	  Lantiq / Intel GSWIP switches.
+
+config NET_DSA_TAG_DSA
+	tristate "Tag driver for Marvell switches using DSA headers"
+	help
+	  Say Y or M if you want to enable support for tagging frames for the
+	  Marvell switches which use DSA headers.
+
+config NET_DSA_TAG_EDSA
+	tristate "Tag driver for Marvell switches using EtherType DSA headers"
+	help
+	  Say Y or M if you want to enable support for tagging frames for the
+	  Marvell switches which use EtherType DSA headers.
+
+config NET_DSA_TAG_MTK
+	tristate "Tag driver for Mediatek switches"
+	help
+	  Say Y or M if you want to enable support for tagging frames for
+	  Mediatek switches.
+
+config NET_DSA_TAG_KSZ
+	tristate "Tag driver for Microchip 8795/9477/9893 families of switches"
+	help
+	  Say Y if you want to enable support for tagging frames for the
+	  Microchip 8795/9477/9893 families of switches.
+
+config NET_DSA_TAG_RTL4_A
+	tristate "Tag driver for Realtek 4 byte protocol A tags"
+	help
+	  Say Y or M if you want to enable support for tagging frames for the
+	  Realtek switches with 4 byte protocol A tags, sich as found in
+	  the Realtek RTL8366RB.
+
+config NET_DSA_TAG_OCELOT
+	tristate "Tag driver for Ocelot family of switches"
+	select PACKING
+	help
+	  Say Y or M if you want to enable support for tagging frames for the
+	  Ocelot switches (VSC7511, VSC7512, VSC7513, VSC7514, VSC9959).
+
+config NET_DSA_TAG_QCA
+	tristate "Tag driver for Qualcomm Atheros QCA8K switches"
+	help
+	  Say Y or M if you want to enable support for tagging frames for
+	  the Qualcomm Atheros QCA8K switches.
+
+config NET_DSA_TAG_LAN9303
+	tristate "Tag driver for SMSC/Microchip LAN9303 family of switches"
+	help
+	  Say Y or M if you want to enable support for tagging frames for the
+	  SMSC/Microchip LAN9303 family of switches.
+
+config NET_DSA_TAG_SJA1105
+	tristate "Tag driver for NXP SJA1105 switches"
+	select NET_DSA_TAG_8021Q
+	select PACKING
+	help
+	  Say Y or M if you want to enable support for tagging frames with the
+	  NXP SJA1105 switch family. Both the native tagging protocol (which
+	  is only for link-local traffic) as well as non-native tagging (based
+	  on a custom 802.1Q VLAN header) are available.
+
+config NET_DSA_TAG_TRAILER
+	tristate "Tag driver for switches using a trailer tag"
+	help
+	  Say Y or M if you want to enable support for tagging frames at
+	  with a trailed. e.g. Marvell 88E6060.
+
+endif