diff options
Diffstat (limited to 'samples/bpf/do_hbm_test.sh')
| -rwxr-xr-x | samples/bpf/do_hbm_test.sh | 442 |
1 files changed, 442 insertions, 0 deletions
diff --git a/samples/bpf/do_hbm_test.sh b/samples/bpf/do_hbm_test.sh new file mode 100755 index 000000000..ffe4c0607 --- /dev/null +++ b/samples/bpf/do_hbm_test.sh @@ -0,0 +1,442 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 +# +# Copyright (c) 2019 Facebook +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of version 2 of the GNU General Public +# License as published by the Free Software Foundation. + +Usage() { + echo "Script for testing HBM (Host Bandwidth Manager) framework." + echo "It creates a cgroup to use for testing and load a BPF program to limit" + echo "egress or ingress bandwidht. It then uses iperf3 or netperf to create" + echo "loads. The output is the goodput in Mbps (unless -D was used)." + echo "" + echo "USAGE: $name [out] [-b=<prog>|--bpf=<prog>] [-c=<cc>|--cc=<cc>]" + echo " [-D] [-d=<delay>|--delay=<delay>] [--debug] [-E] [--edt]" + echo " [-f=<#flows>|--flows=<#flows>] [-h] [-i=<id>|--id=<id >]" + echo " [-l] [-N] [--no_cn] [-p=<port>|--port=<port>] [-P]" + echo " [-q=<qdisc>] [-R] [-s=<server>|--server=<server]" + echo " [-S|--stats] -t=<time>|--time=<time>] [-w] [cubic|dctcp]" + echo " Where:" + echo " out egress (default)" + echo " -b or --bpf BPF program filename to load and attach." + echo " Default is hbm_out_kern.o for egress," + echo " -c or -cc TCP congestion control (cubic or dctcp)" + echo " --debug print BPF trace buffer" + echo " -d or --delay add a delay in ms using netem" + echo " -D In addition to the goodput in Mbps, it also outputs" + echo " other detailed information. This information is" + echo " test dependent (i.e. iperf3 or netperf)." + echo " -E enable ECN (not required for dctcp)" + echo " --edt use fq's Earliest Departure Time (requires fq)" + echo " -f or --flows number of concurrent flows (default=1)" + echo " -i or --id cgroup id (an integer, default is 1)" + echo " -N use netperf instead of iperf3" + echo " --no_cn Do not return CN notifications" + echo " -l do not limit flows using loopback" + echo " -h Help" + echo " -p or --port iperf3 port (default is 5201)" + echo " -P use an iperf3 instance for each flow" + echo " -q use the specified qdisc" + echo " -r or --rate rate in Mbps (default 1s 1Gbps)" + echo " -R Use TCP_RR for netperf. 1st flow has req" + echo " size of 10KB, rest of 1MB. Reply in all" + echo " cases is 1 byte." + echo " More detailed output for each flow can be found" + echo " in the files netperf.<cg>.<flow>, where <cg> is the" + echo " cgroup id as specified with the -i flag, and <flow>" + echo " is the flow id starting at 1 and increasing by 1 for" + echo " flow (as specified by -f)." + echo " -s or --server hostname of netperf server. Used to create netperf" + echo " test traffic between to hosts (default is within host)" + echo " netserver must be running on the host." + echo " -S or --stats whether to update hbm stats (default is yes)." + echo " -t or --time duration of iperf3 in seconds (default=5)" + echo " -w Work conserving flag. cgroup can increase its" + echo " bandwidth beyond the rate limit specified" + echo " while there is available bandwidth. Current" + echo " implementation assumes there is only one NIC" + echo " (eth0), but can be extended to support multiple" + echo " NICs." + echo " cubic or dctcp specify which TCP CC to use" + echo " " + exit +} + +#set -x + +debug_flag=0 +args="$@" +name="$0" +netem=0 +cc=x +dir="-o" +dir_name="out" +dur=5 +flows=1 +id=1 +prog="" +port=5201 +rate=1000 +multi_iperf=0 +flow_cnt=1 +use_netperf=0 +rr=0 +ecn=0 +details=0 +server="" +qdisc="" +flags="" +do_stats=0 + +function start_hbm () { + rm -f hbm.out + echo "./hbm $dir -n $id -r $rate -t $dur $flags $dbg $prog" > hbm.out + echo " " >> hbm.out + ./hbm $dir -n $id -r $rate -t $dur $flags $dbg $prog >> hbm.out 2>&1 & + echo $! +} + +processArgs () { + for i in $args ; do + case $i in + # Support for upcomming ingress rate limiting + #in) # support for upcoming ingress rate limiting + # dir="-i" + # dir_name="in" + # ;; + out) + dir="-o" + dir_name="out" + ;; + -b=*|--bpf=*) + prog="${i#*=}" + ;; + -c=*|--cc=*) + cc="${i#*=}" + ;; + --no_cn) + flags="$flags --no_cn" + ;; + --debug) + flags="$flags -d" + debug_flag=1 + ;; + -d=*|--delay=*) + netem="${i#*=}" + ;; + -D) + details=1 + ;; + -E) + ecn=1 + ;; + --edt) + flags="$flags --edt" + qdisc="fq" + ;; + -f=*|--flows=*) + flows="${i#*=}" + ;; + -i=*|--id=*) + id="${i#*=}" + ;; + -l) + flags="$flags -l" + ;; + -N) + use_netperf=1 + ;; + -p=*|--port=*) + port="${i#*=}" + ;; + -P) + multi_iperf=1 + ;; + -q=*) + qdisc="${i#*=}" + ;; + -r=*|--rate=*) + rate="${i#*=}" + ;; + -R) + rr=1 + ;; + -s=*|--server=*) + server="${i#*=}" + ;; + -S|--stats) + flags="$flags -s" + do_stats=1 + ;; + -t=*|--time=*) + dur="${i#*=}" + ;; + -w) + flags="$flags -w" + ;; + cubic) + cc=cubic + ;; + dctcp) + cc=dctcp + ;; + *) + echo "Unknown arg:$i" + Usage + ;; + esac + done +} + +processArgs + +if [ $debug_flag -eq 1 ] ; then + rm -f hbm_out.log +fi + +hbm_pid=$(start_hbm) +usleep 100000 + +host=`hostname` +cg_base_dir=/sys/fs/cgroup +cg_dir="$cg_base_dir/cgroup-test-work-dir/hbm$id" + +echo $$ >> $cg_dir/cgroup.procs + +ulimit -l unlimited + +rm -f ss.out +rm -f hbm.[0-9]*.$dir_name +if [ $ecn -ne 0 ] ; then + sysctl -w -q -n net.ipv4.tcp_ecn=1 +fi + +if [ $use_netperf -eq 0 ] ; then + cur_cc=`sysctl -n net.ipv4.tcp_congestion_control` + if [ "$cc" != "x" ] ; then + sysctl -w -q -n net.ipv4.tcp_congestion_control=$cc + fi +fi + +if [ "$netem" -ne "0" ] ; then + if [ "$qdisc" != "" ] ; then + echo "WARNING: Ignoring -q options because -d option used" + fi + tc qdisc del dev lo root > /dev/null 2>&1 + tc qdisc add dev lo root netem delay $netem\ms > /dev/null 2>&1 +elif [ "$qdisc" != "" ] ; then + tc qdisc del dev eth0 root > /dev/null 2>&1 + tc qdisc add dev eth0 root $qdisc > /dev/null 2>&1 +fi + +n=0 +m=$[$dur * 5] +hn="::1" +if [ $use_netperf -ne 0 ] ; then + if [ "$server" != "" ] ; then + hn=$server + fi +fi + +( ping6 -i 0.2 -c $m $hn > ping.out 2>&1 ) & + +if [ $use_netperf -ne 0 ] ; then + begNetserverPid=`ps ax | grep netserver | grep --invert-match "grep" | \ + awk '{ print $1 }'` + if [ "$begNetserverPid" == "" ] ; then + if [ "$server" == "" ] ; then + ( ./netserver > /dev/null 2>&1) & + usleep 100000 + fi + fi + flow_cnt=1 + if [ "$server" == "" ] ; then + np_server=$host + else + np_server=$server + fi + if [ "$cc" == "x" ] ; then + np_cc="" + else + np_cc="-K $cc,$cc" + fi + replySize=1 + while [ $flow_cnt -le $flows ] ; do + if [ $rr -ne 0 ] ; then + reqSize=1M + if [ $flow_cnt -eq 1 ] ; then + reqSize=10K + fi + if [ "$dir" == "-i" ] ; then + replySize=$reqSize + reqSize=1 + fi + ( ./netperf -H $np_server -l $dur -f m -j -t TCP_RR -- -r $reqSize,$replySize $np_cc -k P50_lATENCY,P90_LATENCY,LOCAL_TRANSPORT_RETRANS,REMOTE_TRANSPORT_RETRANS,LOCAL_SEND_THROUGHPUT,LOCAL_RECV_THROUGHPUT,REQUEST_SIZE,RESPONSE_SIZE > netperf.$id.$flow_cnt ) & + else + if [ "$dir" == "-i" ] ; then + ( ./netperf -H $np_server -l $dur -f m -j -t TCP_RR -- -r 1,10M $np_cc -k P50_LATENCY,P90_LATENCY,LOCAL_TRANSPORT_RETRANS,LOCAL_SEND_THROUGHPUT,REMOTE_TRANSPORT_RETRANS,REMOTE_SEND_THROUGHPUT,REQUEST_SIZE,RESPONSE_SIZE > netperf.$id.$flow_cnt ) & + else + ( ./netperf -H $np_server -l $dur -f m -j -t TCP_STREAM -- $np_cc -k P50_lATENCY,P90_LATENCY,LOCAL_TRANSPORT_RETRANS,LOCAL_SEND_THROUGHPUT,REQUEST_SIZE,RESPONSE_SIZE > netperf.$id.$flow_cnt ) & + fi + fi + flow_cnt=$[flow_cnt+1] + done + +# sleep for duration of test (plus some buffer) + n=$[dur+2] + sleep $n + +# force graceful termination of netperf + pids=`pgrep netperf` + for p in $pids ; do + kill -SIGALRM $p + done + + flow_cnt=1 + rate=0 + if [ $details -ne 0 ] ; then + echo "" + echo "Details for HBM in cgroup $id" + if [ $do_stats -eq 1 ] ; then + if [ -e hbm.$id.$dir_name ] ; then + cat hbm.$id.$dir_name + fi + fi + fi + while [ $flow_cnt -le $flows ] ; do + if [ "$dir" == "-i" ] ; then + r=`cat netperf.$id.$flow_cnt | grep -o "REMOTE_SEND_THROUGHPUT=[0-9]*" | grep -o "[0-9]*"` + else + r=`cat netperf.$id.$flow_cnt | grep -o "LOCAL_SEND_THROUGHPUT=[0-9]*" | grep -o "[0-9]*"` + fi + echo "rate for flow $flow_cnt: $r" + rate=$[rate+r] + if [ $details -ne 0 ] ; then + echo "-----" + echo "Details for cgroup $id, flow $flow_cnt" + cat netperf.$id.$flow_cnt + fi + flow_cnt=$[flow_cnt+1] + done + if [ $details -ne 0 ] ; then + echo "" + delay=`grep "avg" ping.out | grep -o "= [0-9.]*/[0-9.]*" | grep -o "[0-9.]*$"` + echo "PING AVG DELAY:$delay" + echo "AGGREGATE_GOODPUT:$rate" + else + echo $rate + fi +elif [ $multi_iperf -eq 0 ] ; then + (iperf3 -s -p $port -1 > /dev/null 2>&1) & + usleep 100000 + iperf3 -c $host -p $port -i 0 -P $flows -f m -t $dur > iperf.$id + rates=`grep receiver iperf.$id | grep -o "[0-9.]* Mbits" | grep -o "^[0-9]*"` + rate=`echo $rates | grep -o "[0-9]*$"` + + if [ $details -ne 0 ] ; then + echo "" + echo "Details for HBM in cgroup $id" + if [ $do_stats -eq 1 ] ; then + if [ -e hbm.$id.$dir_name ] ; then + cat hbm.$id.$dir_name + fi + fi + delay=`grep "avg" ping.out | grep -o "= [0-9.]*/[0-9.]*" | grep -o "[0-9.]*$"` + echo "PING AVG DELAY:$delay" + echo "AGGREGATE_GOODPUT:$rate" + else + echo $rate + fi +else + flow_cnt=1 + while [ $flow_cnt -le $flows ] ; do + (iperf3 -s -p $port -1 > /dev/null 2>&1) & + ( iperf3 -c $host -p $port -i 0 -P 1 -f m -t $dur | grep receiver | grep -o "[0-9.]* Mbits" | grep -o "^[0-9]*" | grep -o "[0-9]*$" > iperf3.$id.$flow_cnt ) & + port=$[port+1] + flow_cnt=$[flow_cnt+1] + done + n=$[dur+1] + sleep $n + flow_cnt=1 + rate=0 + if [ $details -ne 0 ] ; then + echo "" + echo "Details for HBM in cgroup $id" + if [ $do_stats -eq 1 ] ; then + if [ -e hbm.$id.$dir_name ] ; then + cat hbm.$id.$dir_name + fi + fi + fi + + while [ $flow_cnt -le $flows ] ; do + r=`cat iperf3.$id.$flow_cnt` +# echo "rate for flow $flow_cnt: $r" + if [ $details -ne 0 ] ; then + echo "Rate for cgroup $id, flow $flow_cnt LOCAL_SEND_THROUGHPUT=$r" + fi + rate=$[rate+r] + flow_cnt=$[flow_cnt+1] + done + if [ $details -ne 0 ] ; then + delay=`grep "avg" ping.out | grep -o "= [0-9.]*/[0-9.]*" | grep -o "[0-9.]*$"` + echo "PING AVG DELAY:$delay" + echo "AGGREGATE_GOODPUT:$rate" + else + echo $rate + fi +fi + +if [ $use_netperf -eq 0 ] ; then + sysctl -w -q -n net.ipv4.tcp_congestion_control=$cur_cc +fi +if [ $ecn -ne 0 ] ; then + sysctl -w -q -n net.ipv4.tcp_ecn=0 +fi +if [ "$netem" -ne "0" ] ; then + tc qdisc del dev lo root > /dev/null 2>&1 +fi +if [ "$qdisc" != "" ] ; then + tc qdisc del dev eth0 root > /dev/null 2>&1 +fi +sleep 2 + +hbmPid=`ps ax | grep "hbm " | grep --invert-match "grep" | awk '{ print $1 }'` +if [ "$hbmPid" == "$hbm_pid" ] ; then + kill $hbm_pid +fi + +sleep 1 + +# Detach any BPF programs that may have lingered +ttx=`bpftool cgroup tree | grep hbm` +v=2 +for x in $ttx ; do + if [ "${x:0:36}" == "/sys/fs/cgroup/cgroup-test-work-dir/" ] ; then + cg=$x ; v=0 + else + if [ $v -eq 0 ] ; then + id=$x ; v=1 + else + if [ $v -eq 1 ] ; then + type=$x ; bpftool cgroup detach $cg $type id $id + v=0 + fi + fi + fi +done + +if [ $use_netperf -ne 0 ] ; then + if [ "$server" == "" ] ; then + if [ "$begNetserverPid" == "" ] ; then + netserverPid=`ps ax | grep netserver | grep --invert-match "grep" | awk '{ print $1 }'` + if [ "$netserverPid" != "" ] ; then + kill $netserverPid + fi + fi + fi +fi +exit |