diff options
Diffstat (limited to 'scripts/dtc/libfdt')
| -rw-r--r-- | scripts/dtc/libfdt/fdt.c | 327 | ||||
| -rw-r--r-- | scripts/dtc/libfdt/fdt.h | 66 | ||||
| -rw-r--r-- | scripts/dtc/libfdt/fdt_addresses.c | 101 | ||||
| -rw-r--r-- | scripts/dtc/libfdt/fdt_empty_tree.c | 38 | ||||
| -rw-r--r-- | scripts/dtc/libfdt/fdt_overlay.c | 882 | ||||
| -rw-r--r-- | scripts/dtc/libfdt/fdt_ro.c | 859 | ||||
| -rw-r--r-- | scripts/dtc/libfdt/fdt_rw.c | 492 | ||||
| -rw-r--r-- | scripts/dtc/libfdt/fdt_strerror.c | 59 | ||||
| -rw-r--r-- | scripts/dtc/libfdt/fdt_sw.c | 384 | ||||
| -rw-r--r-- | scripts/dtc/libfdt/fdt_wip.c | 94 | ||||
| -rw-r--r-- | scripts/dtc/libfdt/libfdt.h | 2080 | ||||
| -rw-r--r-- | scripts/dtc/libfdt/libfdt_env.h | 96 | ||||
| -rw-r--r-- | scripts/dtc/libfdt/libfdt_internal.h | 173 |
13 files changed, 5651 insertions, 0 deletions
diff --git a/scripts/dtc/libfdt/fdt.c b/scripts/dtc/libfdt/fdt.c new file mode 100644 index 000000000..6cf2fa03b --- /dev/null +++ b/scripts/dtc/libfdt/fdt.c @@ -0,0 +1,327 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-2-Clause) +/* + * libfdt - Flat Device Tree manipulation + * Copyright (C) 2006 David Gibson, IBM Corporation. + */ +#include "libfdt_env.h" + +#include <fdt.h> +#include <libfdt.h> + +#include "libfdt_internal.h" + +/* + * Minimal sanity check for a read-only tree. fdt_ro_probe_() checks + * that the given buffer contains what appears to be a flattened + * device tree with sane information in its header. + */ +int32_t fdt_ro_probe_(const void *fdt) +{ + uint32_t totalsize = fdt_totalsize(fdt); + + if (can_assume(VALID_DTB)) + return totalsize; + + if (fdt_magic(fdt) == FDT_MAGIC) { + /* Complete tree */ + if (!can_assume(LATEST)) { + if (fdt_version(fdt) < FDT_FIRST_SUPPORTED_VERSION) + return -FDT_ERR_BADVERSION; + if (fdt_last_comp_version(fdt) > + FDT_LAST_SUPPORTED_VERSION) + return -FDT_ERR_BADVERSION; + } + } else if (fdt_magic(fdt) == FDT_SW_MAGIC) { + /* Unfinished sequential-write blob */ + if (!can_assume(VALID_INPUT) && fdt_size_dt_struct(fdt) == 0) + return -FDT_ERR_BADSTATE; + } else { + return -FDT_ERR_BADMAGIC; + } + + if (totalsize < INT32_MAX) + return totalsize; + else + return -FDT_ERR_TRUNCATED; +} + +static int check_off_(uint32_t hdrsize, uint32_t totalsize, uint32_t off) +{ + return (off >= hdrsize) && (off <= totalsize); +} + +static int check_block_(uint32_t hdrsize, uint32_t totalsize, + uint32_t base, uint32_t size) +{ + if (!check_off_(hdrsize, totalsize, base)) + return 0; /* block start out of bounds */ + if ((base + size) < base) + return 0; /* overflow */ + if (!check_off_(hdrsize, totalsize, base + size)) + return 0; /* block end out of bounds */ + return 1; +} + +size_t fdt_header_size_(uint32_t version) +{ + if (version <= 1) + return FDT_V1_SIZE; + else if (version <= 2) + return FDT_V2_SIZE; + else if (version <= 3) + return FDT_V3_SIZE; + else if (version <= 16) + return FDT_V16_SIZE; + else + return FDT_V17_SIZE; +} + +size_t fdt_header_size(const void *fdt) +{ + return can_assume(LATEST) ? FDT_V17_SIZE : + fdt_header_size_(fdt_version(fdt)); +} + +int fdt_check_header(const void *fdt) +{ + size_t hdrsize; + + if (fdt_magic(fdt) != FDT_MAGIC) + return -FDT_ERR_BADMAGIC; + if (!can_assume(LATEST)) { + if ((fdt_version(fdt) < FDT_FIRST_SUPPORTED_VERSION) + || (fdt_last_comp_version(fdt) > + FDT_LAST_SUPPORTED_VERSION)) + return -FDT_ERR_BADVERSION; + if (fdt_version(fdt) < fdt_last_comp_version(fdt)) + return -FDT_ERR_BADVERSION; + } + hdrsize = fdt_header_size(fdt); + if (!can_assume(VALID_DTB)) { + + if ((fdt_totalsize(fdt) < hdrsize) + || (fdt_totalsize(fdt) > INT_MAX)) + return -FDT_ERR_TRUNCATED; + + /* Bounds check memrsv block */ + if (!check_off_(hdrsize, fdt_totalsize(fdt), + fdt_off_mem_rsvmap(fdt))) + return -FDT_ERR_TRUNCATED; + } + + if (!can_assume(VALID_DTB)) { + /* Bounds check structure block */ + if (!can_assume(LATEST) && fdt_version(fdt) < 17) { + if (!check_off_(hdrsize, fdt_totalsize(fdt), + fdt_off_dt_struct(fdt))) + return -FDT_ERR_TRUNCATED; + } else { + if (!check_block_(hdrsize, fdt_totalsize(fdt), + fdt_off_dt_struct(fdt), + fdt_size_dt_struct(fdt))) + return -FDT_ERR_TRUNCATED; + } + + /* Bounds check strings block */ + if (!check_block_(hdrsize, fdt_totalsize(fdt), + fdt_off_dt_strings(fdt), + fdt_size_dt_strings(fdt))) + return -FDT_ERR_TRUNCATED; + } + + return 0; +} + +const void *fdt_offset_ptr(const void *fdt, int offset, unsigned int len) +{ + unsigned int uoffset = offset; + unsigned int absoffset = offset + fdt_off_dt_struct(fdt); + + if (offset < 0) + return NULL; + + if (!can_assume(VALID_INPUT)) + if ((absoffset < uoffset) + || ((absoffset + len) < absoffset) + || (absoffset + len) > fdt_totalsize(fdt)) + return NULL; + + if (can_assume(LATEST) || fdt_version(fdt) >= 0x11) + if (((uoffset + len) < uoffset) + || ((offset + len) > fdt_size_dt_struct(fdt))) + return NULL; + + return fdt_offset_ptr_(fdt, offset); +} + +uint32_t fdt_next_tag(const void *fdt, int startoffset, int *nextoffset) +{ + const fdt32_t *tagp, *lenp; + uint32_t tag; + int offset = startoffset; + const char *p; + + *nextoffset = -FDT_ERR_TRUNCATED; + tagp = fdt_offset_ptr(fdt, offset, FDT_TAGSIZE); + if (!can_assume(VALID_DTB) && !tagp) + return FDT_END; /* premature end */ + tag = fdt32_to_cpu(*tagp); + offset += FDT_TAGSIZE; + + *nextoffset = -FDT_ERR_BADSTRUCTURE; + switch (tag) { + case FDT_BEGIN_NODE: + /* skip name */ + do { + p = fdt_offset_ptr(fdt, offset++, 1); + } while (p && (*p != '\0')); + if (!can_assume(VALID_DTB) && !p) + return FDT_END; /* premature end */ + break; + + case FDT_PROP: + lenp = fdt_offset_ptr(fdt, offset, sizeof(*lenp)); + if (!can_assume(VALID_DTB) && !lenp) + return FDT_END; /* premature end */ + /* skip-name offset, length and value */ + offset += sizeof(struct fdt_property) - FDT_TAGSIZE + + fdt32_to_cpu(*lenp); + if (!can_assume(LATEST) && + fdt_version(fdt) < 0x10 && fdt32_to_cpu(*lenp) >= 8 && + ((offset - fdt32_to_cpu(*lenp)) % 8) != 0) + offset += 4; + break; + + case FDT_END: + case FDT_END_NODE: + case FDT_NOP: + break; + + default: + return FDT_END; + } + + if (!fdt_offset_ptr(fdt, startoffset, offset - startoffset)) + return FDT_END; /* premature end */ + + *nextoffset = FDT_TAGALIGN(offset); + return tag; +} + +int fdt_check_node_offset_(const void *fdt, int offset) +{ + if (!can_assume(VALID_INPUT) + && ((offset < 0) || (offset % FDT_TAGSIZE))) + return -FDT_ERR_BADOFFSET; + + if (fdt_next_tag(fdt, offset, &offset) != FDT_BEGIN_NODE) + return -FDT_ERR_BADOFFSET; + + return offset; +} + +int fdt_check_prop_offset_(const void *fdt, int offset) +{ + if (!can_assume(VALID_INPUT) + && ((offset < 0) || (offset % FDT_TAGSIZE))) + return -FDT_ERR_BADOFFSET; + + if (fdt_next_tag(fdt, offset, &offset) != FDT_PROP) + return -FDT_ERR_BADOFFSET; + + return offset; +} + +int fdt_next_node(const void *fdt, int offset, int *depth) +{ + int nextoffset = 0; + uint32_t tag; + + if (offset >= 0) + if ((nextoffset = fdt_check_node_offset_(fdt, offset)) < 0) + return nextoffset; + + do { + offset = nextoffset; + tag = fdt_next_tag(fdt, offset, &nextoffset); + + switch (tag) { + case FDT_PROP: + case FDT_NOP: + break; + + case FDT_BEGIN_NODE: + if (depth) + (*depth)++; + break; + + case FDT_END_NODE: + if (depth && ((--(*depth)) < 0)) + return nextoffset; + break; + + case FDT_END: + if ((nextoffset >= 0) + || ((nextoffset == -FDT_ERR_TRUNCATED) && !depth)) + return -FDT_ERR_NOTFOUND; + else + return nextoffset; + } + } while (tag != FDT_BEGIN_NODE); + + return offset; +} + +int fdt_first_subnode(const void *fdt, int offset) +{ + int depth = 0; + + offset = fdt_next_node(fdt, offset, &depth); + if (offset < 0 || depth != 1) + return -FDT_ERR_NOTFOUND; + + return offset; +} + +int fdt_next_subnode(const void *fdt, int offset) +{ + int depth = 1; + + /* + * With respect to the parent, the depth of the next subnode will be + * the same as the last. + */ + do { + offset = fdt_next_node(fdt, offset, &depth); + if (offset < 0 || depth < 1) + return -FDT_ERR_NOTFOUND; + } while (depth > 1); + + return offset; +} + +const char *fdt_find_string_(const char *strtab, int tabsize, const char *s) +{ + int len = strlen(s) + 1; + const char *last = strtab + tabsize - len; + const char *p; + + for (p = strtab; p <= last; p++) + if (memcmp(p, s, len) == 0) + return p; + return NULL; +} + +int fdt_move(const void *fdt, void *buf, int bufsize) +{ + if (!can_assume(VALID_INPUT) && bufsize < 0) + return -FDT_ERR_NOSPACE; + + FDT_RO_PROBE(fdt); + + if (fdt_totalsize(fdt) > (unsigned int)bufsize) + return -FDT_ERR_NOSPACE; + + memmove(buf, fdt, fdt_totalsize(fdt)); + return 0; +} diff --git a/scripts/dtc/libfdt/fdt.h b/scripts/dtc/libfdt/fdt.h new file mode 100644 index 000000000..f2e68807f --- /dev/null +++ b/scripts/dtc/libfdt/fdt.h @@ -0,0 +1,66 @@ +/* SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-2-Clause) */ +#ifndef FDT_H +#define FDT_H +/* + * libfdt - Flat Device Tree manipulation + * Copyright (C) 2006 David Gibson, IBM Corporation. + * Copyright 2012 Kim Phillips, Freescale Semiconductor. + */ + +#ifndef __ASSEMBLY__ + +struct fdt_header { + fdt32_t magic; /* magic word FDT_MAGIC */ + fdt32_t totalsize; /* total size of DT block */ + fdt32_t off_dt_struct; /* offset to structure */ + fdt32_t off_dt_strings; /* offset to strings */ + fdt32_t off_mem_rsvmap; /* offset to memory reserve map */ + fdt32_t version; /* format version */ + fdt32_t last_comp_version; /* last compatible version */ + + /* version 2 fields below */ + fdt32_t boot_cpuid_phys; /* Which physical CPU id we're + booting on */ + /* version 3 fields below */ + fdt32_t size_dt_strings; /* size of the strings block */ + + /* version 17 fields below */ + fdt32_t size_dt_struct; /* size of the structure block */ +}; + +struct fdt_reserve_entry { + fdt64_t address; + fdt64_t size; +}; + +struct fdt_node_header { + fdt32_t tag; + char name[0]; +}; + +struct fdt_property { + fdt32_t tag; + fdt32_t len; + fdt32_t nameoff; + char data[0]; +}; + +#endif /* !__ASSEMBLY */ + +#define FDT_MAGIC 0xd00dfeed /* 4: version, 4: total size */ +#define FDT_TAGSIZE sizeof(fdt32_t) + +#define FDT_BEGIN_NODE 0x1 /* Start node: full name */ +#define FDT_END_NODE 0x2 /* End node */ +#define FDT_PROP 0x3 /* Property: name off, + size, content */ +#define FDT_NOP 0x4 /* nop */ +#define FDT_END 0x9 + +#define FDT_V1_SIZE (7*sizeof(fdt32_t)) +#define FDT_V2_SIZE (FDT_V1_SIZE + sizeof(fdt32_t)) +#define FDT_V3_SIZE (FDT_V2_SIZE + sizeof(fdt32_t)) +#define FDT_V16_SIZE FDT_V3_SIZE +#define FDT_V17_SIZE (FDT_V16_SIZE + sizeof(fdt32_t)) + +#endif /* FDT_H */ diff --git a/scripts/dtc/libfdt/fdt_addresses.c b/scripts/dtc/libfdt/fdt_addresses.c new file mode 100644 index 000000000..9a82cd0ba --- /dev/null +++ b/scripts/dtc/libfdt/fdt_addresses.c @@ -0,0 +1,101 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-2-Clause) +/* + * libfdt - Flat Device Tree manipulation + * Copyright (C) 2014 David Gibson <david@gibson.dropbear.id.au> + * Copyright (C) 2018 embedded brains GmbH + */ +#include "libfdt_env.h" + +#include <fdt.h> +#include <libfdt.h> + +#include "libfdt_internal.h" + +static int fdt_cells(const void *fdt, int nodeoffset, const char *name) +{ + const fdt32_t *c; + uint32_t val; + int len; + + c = fdt_getprop(fdt, nodeoffset, name, &len); + if (!c) + return len; + + if (len != sizeof(*c)) + return -FDT_ERR_BADNCELLS; + + val = fdt32_to_cpu(*c); + if (val > FDT_MAX_NCELLS) + return -FDT_ERR_BADNCELLS; + + return (int)val; +} + +int fdt_address_cells(const void *fdt, int nodeoffset) +{ + int val; + + val = fdt_cells(fdt, nodeoffset, "#address-cells"); + if (val == 0) + return -FDT_ERR_BADNCELLS; + if (val == -FDT_ERR_NOTFOUND) + return 2; + return val; +} + +int fdt_size_cells(const void *fdt, int nodeoffset) +{ + int val; + + val = fdt_cells(fdt, nodeoffset, "#size-cells"); + if (val == -FDT_ERR_NOTFOUND) + return 1; + return val; +} + +/* This function assumes that [address|size]_cells is 1 or 2 */ +int fdt_appendprop_addrrange(void *fdt, int parent, int nodeoffset, + const char *name, uint64_t addr, uint64_t size) +{ + int addr_cells, size_cells, ret; + uint8_t data[sizeof(fdt64_t) * 2], *prop; + + ret = fdt_address_cells(fdt, parent); + if (ret < 0) + return ret; + addr_cells = ret; + + ret = fdt_size_cells(fdt, parent); + if (ret < 0) + return ret; + size_cells = ret; + + /* check validity of address */ + prop = data; + if (addr_cells == 1) { + if ((addr > UINT32_MAX) || ((UINT32_MAX + 1 - addr) < size)) + return -FDT_ERR_BADVALUE; + + fdt32_st(prop, (uint32_t)addr); + } else if (addr_cells == 2) { + fdt64_st(prop, addr); + } else { + return -FDT_ERR_BADNCELLS; + } + + /* check validity of size */ + prop += addr_cells * sizeof(fdt32_t); + if (size_cells == 1) { + if (size > UINT32_MAX) + return -FDT_ERR_BADVALUE; + + fdt32_st(prop, (uint32_t)size); + } else if (size_cells == 2) { + fdt64_st(prop, size); + } else { + return -FDT_ERR_BADNCELLS; + } + + return fdt_appendprop(fdt, nodeoffset, name, data, + (addr_cells + size_cells) * sizeof(fdt32_t)); +} diff --git a/scripts/dtc/libfdt/fdt_empty_tree.c b/scripts/dtc/libfdt/fdt_empty_tree.c new file mode 100644 index 000000000..49d54d44b --- /dev/null +++ b/scripts/dtc/libfdt/fdt_empty_tree.c @@ -0,0 +1,38 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-2-Clause) +/* + * libfdt - Flat Device Tree manipulation + * Copyright (C) 2012 David Gibson, IBM Corporation. + */ +#include "libfdt_env.h" + +#include <fdt.h> +#include <libfdt.h> + +#include "libfdt_internal.h" + +int fdt_create_empty_tree(void *buf, int bufsize) +{ + int err; + + err = fdt_create(buf, bufsize); + if (err) + return err; + + err = fdt_finish_reservemap(buf); + if (err) + return err; + + err = fdt_begin_node(buf, ""); + if (err) + return err; + + err = fdt_end_node(buf); + if (err) + return err; + + err = fdt_finish(buf); + if (err) + return err; + + return fdt_open_into(buf, buf, bufsize); +} diff --git a/scripts/dtc/libfdt/fdt_overlay.c b/scripts/dtc/libfdt/fdt_overlay.c new file mode 100644 index 000000000..d217e79b6 --- /dev/null +++ b/scripts/dtc/libfdt/fdt_overlay.c @@ -0,0 +1,882 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-2-Clause) +/* + * libfdt - Flat Device Tree manipulation + * Copyright (C) 2016 Free Electrons + * Copyright (C) 2016 NextThing Co. + */ +#include "libfdt_env.h" + +#include <fdt.h> +#include <libfdt.h> + +#include "libfdt_internal.h" + +/** + * overlay_get_target_phandle - retrieves the target phandle of a fragment + * @fdto: pointer to the device tree overlay blob + * @fragment: node offset of the fragment in the overlay + * + * overlay_get_target_phandle() retrieves the target phandle of an + * overlay fragment when that fragment uses a phandle (target + * property) instead of a path (target-path property). + * + * returns: + * the phandle pointed by the target property + * 0, if the phandle was not found + * -1, if the phandle was malformed + */ +static uint32_t overlay_get_target_phandle(const void *fdto, int fragment) +{ + const fdt32_t *val; + int len; + + val = fdt_getprop(fdto, fragment, "target", &len); + if (!val) + return 0; + + if ((len != sizeof(*val)) || (fdt32_to_cpu(*val) == (uint32_t)-1)) + return (uint32_t)-1; + + return fdt32_to_cpu(*val); +} + +/** + * overlay_get_target - retrieves the offset of a fragment's target + * @fdt: Base device tree blob + * @fdto: Device tree overlay blob + * @fragment: node offset of the fragment in the overlay + * @pathp: pointer which receives the path of the target (or NULL) + * + * overlay_get_target() retrieves the target offset in the base + * device tree of a fragment, no matter how the actual targeting is + * done (through a phandle or a path) + * + * returns: + * the targeted node offset in the base device tree + * Negative error code on error + */ +static int overlay_get_target(const void *fdt, const void *fdto, + int fragment, char const **pathp) +{ + uint32_t phandle; + const char *path = NULL; + int path_len = 0, ret; + + /* Try first to do a phandle based lookup */ + phandle = overlay_get_target_phandle(fdto, fragment); + if (phandle == (uint32_t)-1) + return -FDT_ERR_BADPHANDLE; + + /* no phandle, try path */ + if (!phandle) { + /* And then a path based lookup */ + path = fdt_getprop(fdto, fragment, "target-path", &path_len); + if (path) + ret = fdt_path_offset(fdt, path); + else + ret = path_len; + } else + ret = fdt_node_offset_by_phandle(fdt, phandle); + + /* + * If we haven't found either a target or a + * target-path property in a node that contains a + * __overlay__ subnode (we wouldn't be called + * otherwise), consider it a improperly written + * overlay + */ + if (ret < 0 && path_len == -FDT_ERR_NOTFOUND) + ret = -FDT_ERR_BADOVERLAY; + + /* return on error */ + if (ret < 0) + return ret; + + /* return pointer to path (if available) */ + if (pathp) + *pathp = path ? path : NULL; + + return ret; +} + +/** + * overlay_phandle_add_offset - Increases a phandle by an offset + * @fdt: Base device tree blob + * @node: Device tree overlay blob + * @name: Name of the property to modify (phandle or linux,phandle) + * @delta: offset to apply + * + * overlay_phandle_add_offset() increments a node phandle by a given + * offset. + * + * returns: + * 0 on success. + * Negative error code on error + */ +static int overlay_phandle_add_offset(void *fdt, int node, + const char *name, uint32_t delta) +{ + const fdt32_t *val; + uint32_t adj_val; + int len; + + val = fdt_getprop(fdt, node, name, &len); + if (!val) + return len; + + if (len != sizeof(*val)) + return -FDT_ERR_BADPHANDLE; + + adj_val = fdt32_to_cpu(*val); + if ((adj_val + delta) < adj_val) + return -FDT_ERR_NOPHANDLES; + + adj_val += delta; + if (adj_val == (uint32_t)-1) + return -FDT_ERR_NOPHANDLES; + + return fdt_setprop_inplace_u32(fdt, node, name, adj_val); +} + +/** + * overlay_adjust_node_phandles - Offsets the phandles of a node + * @fdto: Device tree overlay blob + * @node: Offset of the node we want to adjust + * @delta: Offset to shift the phandles of + * + * overlay_adjust_node_phandles() adds a constant to all the phandles + * of a given node. This is mainly use as part of the overlay + * application process, when we want to update all the overlay + * phandles to not conflict with the overlays of the base device tree. + * + * returns: + * 0 on success + * Negative error code on failure + */ +static int overlay_adjust_node_phandles(void *fdto, int node, + uint32_t delta) +{ + int child; + int ret; + + ret = overlay_phandle_add_offset(fdto, node, "phandle", delta); + if (ret && ret != -FDT_ERR_NOTFOUND) + return ret; + + ret = overlay_phandle_add_offset(fdto, node, "linux,phandle", delta); + if (ret && ret != -FDT_ERR_NOTFOUND) + return ret; + + fdt_for_each_subnode(child, fdto, node) { + ret = overlay_adjust_node_phandles(fdto, child, delta); + if (ret) + return ret; + } + + return 0; +} + +/** + * overlay_adjust_local_phandles - Adjust the phandles of a whole overlay + * @fdto: Device tree overlay blob + * @delta: Offset to shift the phandles of + * + * overlay_adjust_local_phandles() adds a constant to all the + * phandles of an overlay. This is mainly use as part of the overlay + * application process, when we want to update all the overlay + * phandles to not conflict with the overlays of the base device tree. + * + * returns: + * 0 on success + * Negative error code on failure + */ +static int overlay_adjust_local_phandles(void *fdto, uint32_t delta) +{ + /* + * Start adjusting the phandles from the overlay root + */ + return overlay_adjust_node_phandles(fdto, 0, delta); +} + +/** + * overlay_update_local_node_references - Adjust the overlay references + * @fdto: Device tree overlay blob + * @tree_node: Node offset of the node to operate on + * @fixup_node: Node offset of the matching local fixups node + * @delta: Offset to shift the phandles of + * + * overlay_update_local_nodes_references() update the phandles + * pointing to a node within the device tree overlay by adding a + * constant delta. + * + * This is mainly used as part of a device tree application process, + * where you want the device tree overlays phandles to not conflict + * with the ones from the base device tree before merging them. + * + * returns: + * 0 on success + * Negative error code on failure + */ +static int overlay_update_local_node_references(void *fdto, + int tree_node, + int fixup_node, + uint32_t delta) +{ + int fixup_prop; + int fixup_child; + int ret; + + fdt_for_each_property_offset(fixup_prop, fdto, fixup_node) { + const fdt32_t *fixup_val; + const char *tree_val; + const char *name; + int fixup_len; + int tree_len; + int i; + + fixup_val = fdt_getprop_by_offset(fdto, fixup_prop, + &name, &fixup_len); + if (!fixup_val) + return fixup_len; + + if (fixup_len % sizeof(uint32_t)) + return -FDT_ERR_BADOVERLAY; + fixup_len /= sizeof(uint32_t); + + tree_val = fdt_getprop(fdto, tree_node, name, &tree_len); + if (!tree_val) { + if (tree_len == -FDT_ERR_NOTFOUND) + return -FDT_ERR_BADOVERLAY; + + return tree_len; + } + + for (i = 0; i < fixup_len; i++) { + fdt32_t adj_val; + uint32_t poffset; + + poffset = fdt32_to_cpu(fixup_val[i]); + + /* + * phandles to fixup can be unaligned. + * + * Use a memcpy for the architectures that do + * not support unaligned accesses. + */ + memcpy(&adj_val, tree_val + poffset, sizeof(adj_val)); + + adj_val = cpu_to_fdt32(fdt32_to_cpu(adj_val) + delta); + + ret = fdt_setprop_inplace_namelen_partial(fdto, + tree_node, + name, + strlen(name), + poffset, + &adj_val, + sizeof(adj_val)); + if (ret == -FDT_ERR_NOSPACE) + return -FDT_ERR_BADOVERLAY; + + if (ret) + return ret; + } + } + + fdt_for_each_subnode(fixup_child, fdto, fixup_node) { + const char *fixup_child_name = fdt_get_name(fdto, fixup_child, + NULL); + int tree_child; + + tree_child = fdt_subnode_offset(fdto, tree_node, + fixup_child_name); + if (tree_child == -FDT_ERR_NOTFOUND) + return -FDT_ERR_BADOVERLAY; + if (tree_child < 0) + return tree_child; + + ret = overlay_update_local_node_references(fdto, + tree_child, + fixup_child, + delta); + if (ret) + return ret; + } + + return 0; +} + +/** + * overlay_update_local_references - Adjust the overlay references + * @fdto: Device tree overlay blob + * @delta: Offset to shift the phandles of + * + * overlay_update_local_references() update all the phandles pointing + * to a node within the device tree overlay by adding a constant + * delta to not conflict with the base overlay. + * + * This is mainly used as part of a device tree application process, + * where you want the device tree overlays phandles to not conflict + * with the ones from the base device tree before merging them. + * + * returns: + * 0 on success + * Negative error code on failure + */ +static int overlay_update_local_references(void *fdto, uint32_t delta) +{ + int fixups; + + fixups = fdt_path_offset(fdto, "/__local_fixups__"); + if (fixups < 0) { + /* There's no local phandles to adjust, bail out */ + if (fixups == -FDT_ERR_NOTFOUND) + return 0; + + return fixups; + } + + /* + * Update our local references from the root of the tree + */ + return overlay_update_local_node_references(fdto, 0, fixups, + delta); +} + +/** + * overlay_fixup_one_phandle - Set an overlay phandle to the base one + * @fdt: Base Device Tree blob + * @fdto: Device tree overlay blob + * @symbols_off: Node offset of the symbols node in the base device tree + * @path: Path to a node holding a phandle in the overlay + * @path_len: number of path characters to consider + * @name: Name of the property holding the phandle reference in the overlay + * @name_len: number of name characters to consider + * @poffset: Offset within the overlay property where the phandle is stored + * @label: Label of the node referenced by the phandle + * + * overlay_fixup_one_phandle() resolves an overlay phandle pointing to + * a node in the base device tree. + * + * This is part of the device tree overlay application process, when + * you want all the phandles in the overlay to point to the actual + * base dt nodes. + * + * returns: + * 0 on success + * Negative error code on failure + */ +static int overlay_fixup_one_phandle(void *fdt, void *fdto, + int symbols_off, + const char *path, uint32_t path_len, + const char *name, uint32_t name_len, + int poffset, const char *label) +{ + const char *symbol_path; + uint32_t phandle; + fdt32_t phandle_prop; + int symbol_off, fixup_off; + int prop_len; + + if (symbols_off < 0) + return symbols_off; + + symbol_path = fdt_getprop(fdt, symbols_off, label, + &prop_len); + if (!symbol_path) + return prop_len; + + symbol_off = fdt_path_offset(fdt, symbol_path); + if (symbol_off < 0) + return symbol_off; + + phandle = fdt_get_phandle(fdt, symbol_off); + if (!phandle) + return -FDT_ERR_NOTFOUND; + + fixup_off = fdt_path_offset_namelen(fdto, path, path_len); + if (fixup_off == -FDT_ERR_NOTFOUND) + return -FDT_ERR_BADOVERLAY; + if (fixup_off < 0) + return fixup_off; + + phandle_prop = cpu_to_fdt32(phandle); + return fdt_setprop_inplace_namelen_partial(fdto, fixup_off, + name, name_len, poffset, + &phandle_prop, + sizeof(phandle_prop)); +}; + +/** + * overlay_fixup_phandle - Set an overlay phandle to the base one + * @fdt: Base Device Tree blob + * @fdto: Device tree overlay blob + * @symbols_off: Node offset of the symbols node in the base device tree + * @property: Property offset in the overlay holding the list of fixups + * + * overlay_fixup_phandle() resolves all the overlay phandles pointed + * to in a __fixups__ property, and updates them to match the phandles + * in use in the base device tree. + * + * This is part of the device tree overlay application process, when + * you want all the phandles in the overlay to point to the actual + * base dt nodes. + * + * returns: + * 0 on success + * Negative error code on failure + */ +static int overlay_fixup_phandle(void *fdt, void *fdto, int symbols_off, + int property) +{ + const char *value; + const char *label; + int len; + + value = fdt_getprop_by_offset(fdto, property, + &label, &len); + if (!value) { + if (len == -FDT_ERR_NOTFOUND) + return -FDT_ERR_INTERNAL; + + return len; + } + + do { + const char *path, *name, *fixup_end; + const char *fixup_str = value; + uint32_t path_len, name_len; + uint32_t fixup_len; + char *sep, *endptr; + int poffset, ret; + + fixup_end = memchr(value, '\0', len); + if (!fixup_end) + return -FDT_ERR_BADOVERLAY; + fixup_len = fixup_end - fixup_str; + + len -= fixup_len + 1; + value += fixup_len + 1; + + path = fixup_str; + sep = memchr(fixup_str, ':', fixup_len); + if (!sep || *sep != ':') + return -FDT_ERR_BADOVERLAY; + + path_len = sep - path; + if (path_len == (fixup_len - 1)) + return -FDT_ERR_BADOVERLAY; + + fixup_len -= path_len + 1; + name = sep + 1; + sep = memchr(name, ':', fixup_len); + if (!sep || *sep != ':') + return -FDT_ERR_BADOVERLAY; + + name_len = sep - name; + if (!name_len) + return -FDT_ERR_BADOVERLAY; + + poffset = strtoul(sep + 1, &endptr, 10); + if ((*endptr != '\0') || (endptr <= (sep + 1))) + return -FDT_ERR_BADOVERLAY; + + ret = overlay_fixup_one_phandle(fdt, fdto, symbols_off, + path, path_len, name, name_len, + poffset, label); + if (ret) + return ret; + } while (len > 0); + + return 0; +} + +/** + * overlay_fixup_phandles - Resolve the overlay phandles to the base + * device tree + * @fdt: Base Device Tree blob + * @fdto: Device tree overlay blob + * + * overlay_fixup_phandles() resolves all the overlay phandles pointing + * to nodes in the base device tree. + * + * This is one of the steps of the device tree overlay application + * process, when you want all the phandles in the overlay to point to + * the actual base dt nodes. + * + * returns: + * 0 on success + * Negative error code on failure + */ +static int overlay_fixup_phandles(void *fdt, void *fdto) +{ + int fixups_off, symbols_off; + int property; + + /* We can have overlays without any fixups */ + fixups_off = fdt_path_offset(fdto, "/__fixups__"); + if (fixups_off == -FDT_ERR_NOTFOUND) + return 0; /* nothing to do */ + if (fixups_off < 0) + return fixups_off; + + /* And base DTs without symbols */ + symbols_off = fdt_path_offset(fdt, "/__symbols__"); + if ((symbols_off < 0 && (symbols_off != -FDT_ERR_NOTFOUND))) + return symbols_off; + + fdt_for_each_property_offset(property, fdto, fixups_off) { + int ret; + + ret = overlay_fixup_phandle(fdt, fdto, symbols_off, property); + if (ret) + return ret; + } + + return 0; +} + +/** + * overlay_apply_node - Merges a node into the base device tree + * @fdt: Base Device Tree blob + * @target: Node offset in the base device tree to apply the fragment to + * @fdto: Device tree overlay blob + * @node: Node offset in the overlay holding the changes to merge + * + * overlay_apply_node() merges a node into a target base device tree + * node pointed. + * + * This is part of the final step in the device tree overlay + * application process, when all the phandles have been adjusted and + * resolved and you just have to merge overlay into the base device + * tree. + * + * returns: + * 0 on success + * Negative error code on failure + */ +static int overlay_apply_node(void *fdt, int target, + void *fdto, int node) +{ + int property; + int subnode; + + fdt_for_each_property_offset(property, fdto, node) { + const char *name; + const void *prop; + int prop_len; + int ret; + + prop = fdt_getprop_by_offset(fdto, property, &name, + &prop_len); + if (prop_len == -FDT_ERR_NOTFOUND) + return -FDT_ERR_INTERNAL; + if (prop_len < 0) + return prop_len; + + ret = fdt_setprop(fdt, target, name, prop, prop_len); + if (ret) + return ret; + } + + fdt_for_each_subnode(subnode, fdto, node) { + const char *name = fdt_get_name(fdto, subnode, NULL); + int nnode; + int ret; + + nnode = fdt_add_subnode(fdt, target, name); + if (nnode == -FDT_ERR_EXISTS) { + nnode = fdt_subnode_offset(fdt, target, name); + if (nnode == -FDT_ERR_NOTFOUND) + return -FDT_ERR_INTERNAL; + } + + if (nnode < 0) + return nnode; + + ret = overlay_apply_node(fdt, nnode, fdto, subnode); + if (ret) + return ret; + } + + return 0; +} + +/** + * overlay_merge - Merge an overlay into its base device tree + * @fdt: Base Device Tree blob + * @fdto: Device tree overlay blob + * + * overlay_merge() merges an overlay into its base device tree. + * + * This is the next to last step in the device tree overlay application + * process, when all the phandles have been adjusted and resolved and + * you just have to merge overlay into the base device tree. + * + * returns: + * 0 on success + * Negative error code on failure + */ +static int overlay_merge(void *fdt, void *fdto) +{ + int fragment; + + fdt_for_each_subnode(fragment, fdto, 0) { + int overlay; + int target; + int ret; + + /* + * Each fragments will have an __overlay__ node. If + * they don't, it's not supposed to be merged + */ + overlay = fdt_subnode_offset(fdto, fragment, "__overlay__"); + if (overlay == -FDT_ERR_NOTFOUND) + continue; + + if (overlay < 0) + return overlay; + + target = overlay_get_target(fdt, fdto, fragment, NULL); + if (target < 0) + return target; + + ret = overlay_apply_node(fdt, target, fdto, overlay); + if (ret) + return ret; + } + + return 0; +} + +static int get_path_len(const void *fdt, int nodeoffset) +{ + int len = 0, namelen; + const char *name; + + FDT_RO_PROBE(fdt); + + for (;;) { + name = fdt_get_name(fdt, nodeoffset, &namelen); + if (!name) + return namelen; + + /* root? we're done */ + if (namelen == 0) + break; + + nodeoffset = fdt_parent_offset(fdt, nodeoffset); + if (nodeoffset < 0) + return nodeoffset; + len += namelen + 1; + } + + /* in case of root pretend it's "/" */ + if (len == 0) + len++; + return len; +} + +/** + * overlay_symbol_update - Update the symbols of base tree after a merge + * @fdt: Base Device Tree blob + * @fdto: Device tree overlay blob + * + * overlay_symbol_update() updates the symbols of the base tree with the + * symbols of the applied overlay + * + * This is the last step in the device tree overlay application + * process, allowing the reference of overlay symbols by subsequent + * overlay operations. + * + * returns: + * 0 on success + * Negative error code on failure + */ +static int overlay_symbol_update(void *fdt, void *fdto) +{ + int root_sym, ov_sym, prop, path_len, fragment, target; + int len, frag_name_len, ret, rel_path_len; + const char *s, *e; + const char *path; + const char *name; + const char *frag_name; + const char *rel_path; + const char *target_path; + char *buf; + void *p; + + ov_sym = fdt_subnode_offset(fdto, 0, "__symbols__"); + + /* if no overlay symbols exist no problem */ + if (ov_sym < 0) + return 0; + + root_sym = fdt_subnode_offset(fdt, 0, "__symbols__"); + + /* it no root symbols exist we should create them */ + if (root_sym == -FDT_ERR_NOTFOUND) + root_sym = fdt_add_subnode(fdt, 0, "__symbols__"); + + /* any error is fatal now */ + if (root_sym < 0) + return root_sym; + + /* iterate over each overlay symbol */ + fdt_for_each_property_offset(prop, fdto, ov_sym) { + path = fdt_getprop_by_offset(fdto, prop, &name, &path_len); + if (!path) + return path_len; + + /* verify it's a string property (terminated by a single \0) */ + if (path_len < 1 || memchr(path, '\0', path_len) != &path[path_len - 1]) + return -FDT_ERR_BADVALUE; + + /* keep end marker to avoid strlen() */ + e = path + path_len; + + if (*path != '/') + return -FDT_ERR_BADVALUE; + + /* get fragment name first */ + s = strchr(path + 1, '/'); + if (!s) { + /* Symbol refers to something that won't end + * up in the target tree */ + continue; + } + + frag_name = path + 1; + frag_name_len = s - path - 1; + + /* verify format; safe since "s" lies in \0 terminated prop */ + len = sizeof("/__overlay__/") - 1; + if ((e - s) > len && (memcmp(s, "/__overlay__/", len) == 0)) { + /* /<fragment-name>/__overlay__/<relative-subnode-path> */ + rel_path = s + len; + rel_path_len = e - rel_path - 1; + } else if ((e - s) == len + && (memcmp(s, "/__overlay__", len - 1) == 0)) { + /* /<fragment-name>/__overlay__ */ + rel_path = ""; + rel_path_len = 0; + } else { + /* Symbol refers to something that won't end + * up in the target tree */ + continue; + } + + /* find the fragment index in which the symbol lies */ + ret = fdt_subnode_offset_namelen(fdto, 0, frag_name, + frag_name_len); + /* not found? */ + if (ret < 0) + return -FDT_ERR_BADOVERLAY; + fragment = ret; + + /* an __overlay__ subnode must exist */ + ret = fdt_subnode_offset(fdto, fragment, "__overlay__"); + if (ret < 0) + return -FDT_ERR_BADOVERLAY; + + /* get the target of the fragment */ + ret = overlay_get_target(fdt, fdto, fragment, &target_path); + if (ret < 0) + return ret; + target = ret; + + /* if we have a target path use */ + if (!target_path) { + ret = get_path_len(fdt, target); + if (ret < 0) + return ret; + len = ret; + } else { + len = strlen(target_path); + } + + ret = fdt_setprop_placeholder(fdt, root_sym, name, + len + (len > 1) + rel_path_len + 1, &p); + if (ret < 0) + return ret; + + if (!target_path) { + /* again in case setprop_placeholder changed it */ + ret = overlay_get_target(fdt, fdto, fragment, &target_path); + if (ret < 0) + return ret; + target = ret; + } + + buf = p; + if (len > 1) { /* target is not root */ + if (!target_path) { + ret = fdt_get_path(fdt, target, buf, len + 1); + if (ret < 0) + return ret; + } else + memcpy(buf, target_path, len + 1); + + } else + len--; + + buf[len] = '/'; + memcpy(buf + len + 1, rel_path, rel_path_len); + buf[len + 1 + rel_path_len] = '\0'; + } + + return 0; +} + +int fdt_overlay_apply(void *fdt, void *fdto) +{ + uint32_t delta; + int ret; + + FDT_RO_PROBE(fdt); + FDT_RO_PROBE(fdto); + + ret = fdt_find_max_phandle(fdt, &delta); + if (ret) + goto err; + + ret = overlay_adjust_local_phandles(fdto, delta); + if (ret) + goto err; + + ret = overlay_update_local_references(fdto, delta); + if (ret) + goto err; + + ret = overlay_fixup_phandles(fdt, fdto); + if (ret) + goto err; + + ret = overlay_merge(fdt, fdto); + if (ret) + goto err; + + ret = overlay_symbol_update(fdt, fdto); + if (ret) + goto err; + + /* + * The overlay has been damaged, erase its magic. + */ + fdt_set_magic(fdto, ~0); + + return 0; + +err: + /* + * The overlay might have been damaged, erase its magic. + */ + fdt_set_magic(fdto, ~0); + + /* + * The base device tree might have been damaged, erase its + * magic. + */ + fdt_set_magic(fdt, ~0); + + return ret; +} diff --git a/scripts/dtc/libfdt/fdt_ro.c b/scripts/dtc/libfdt/fdt_ro.c new file mode 100644 index 000000000..91cc6fefe --- /dev/null +++ b/scripts/dtc/libfdt/fdt_ro.c @@ -0,0 +1,859 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-2-Clause) +/* + * libfdt - Flat Device Tree manipulation + * Copyright (C) 2006 David Gibson, IBM Corporation. + */ +#include "libfdt_env.h" + +#include <fdt.h> +#include <libfdt.h> + +#include "libfdt_internal.h" + +static int fdt_nodename_eq_(const void *fdt, int offset, + const char *s, int len) +{ + int olen; + const char *p = fdt_get_name(fdt, offset, &olen); + + if (!p || olen < len) + /* short match */ + return 0; + + if (memcmp(p, s, len) != 0) + return 0; + + if (p[len] == '\0') + return 1; + else if (!memchr(s, '@', len) && (p[len] == '@')) + return 1; + else + return 0; +} + +const char *fdt_get_string(const void *fdt, int stroffset, int *lenp) +{ + int32_t totalsize; + uint32_t absoffset; + size_t len; + int err; + const char *s, *n; + + if (can_assume(VALID_INPUT)) { + s = (const char *)fdt + fdt_off_dt_strings(fdt) + stroffset; + + if (lenp) + *lenp = strlen(s); + return s; + } + totalsize = fdt_ro_probe_(fdt); + err = totalsize; + if (totalsize < 0) + goto fail; + + err = -FDT_ERR_BADOFFSET; + absoffset = stroffset + fdt_off_dt_strings(fdt); + if (absoffset >= (unsigned)totalsize) + goto fail; + len = totalsize - absoffset; + + if (fdt_magic(fdt) == FDT_MAGIC) { + if (stroffset < 0) + goto fail; + if (can_assume(LATEST) || fdt_version(fdt) >= 17) { + if ((unsigned)stroffset >= fdt_size_dt_strings(fdt)) + goto fail; + if ((fdt_size_dt_strings(fdt) - stroffset) < len) + len = fdt_size_dt_strings(fdt) - stroffset; + } + } else if (fdt_magic(fdt) == FDT_SW_MAGIC) { + unsigned int sw_stroffset = -stroffset; + + if ((stroffset >= 0) || + (sw_stroffset > fdt_size_dt_strings(fdt))) + goto fail; + if (sw_stroffset < len) + len = sw_stroffset; + } else { + err = -FDT_ERR_INTERNAL; + goto fail; + } + + s = (const char *)fdt + absoffset; + n = memchr(s, '\0', len); + if (!n) { + /* missing terminating NULL */ + err = -FDT_ERR_TRUNCATED; + goto fail; + } + + if (lenp) + *lenp = n - s; + return s; + +fail: + if (lenp) + *lenp = err; + return NULL; +} + +const char *fdt_string(const void *fdt, int stroffset) +{ + return fdt_get_string(fdt, stroffset, NULL); +} + +static int fdt_string_eq_(const void *fdt, int stroffset, + const char *s, int len) +{ + int slen; + const char *p = fdt_get_string(fdt, stroffset, &slen); + + return p && (slen == len) && (memcmp(p, s, len) == 0); +} + +int fdt_find_max_phandle(const void *fdt, uint32_t *phandle) +{ + uint32_t max = 0; + int offset = -1; + + while (true) { + uint32_t value; + + offset = fdt_next_node(fdt, offset, NULL); + if (offset < 0) { + if (offset == -FDT_ERR_NOTFOUND) + break; + + return offset; + } + + value = fdt_get_phandle(fdt, offset); + + if (value > max) + max = value; + } + + if (phandle) + *phandle = max; + + return 0; +} + +int fdt_generate_phandle(const void *fdt, uint32_t *phandle) +{ + uint32_t max; + int err; + + err = fdt_find_max_phandle(fdt, &max); + if (err < 0) + return err; + + if (max == FDT_MAX_PHANDLE) + return -FDT_ERR_NOPHANDLES; + + if (phandle) + *phandle = max + 1; + + return 0; +} + +static const struct fdt_reserve_entry *fdt_mem_rsv(const void *fdt, int n) +{ + unsigned int offset = n * sizeof(struct fdt_reserve_entry); + unsigned int absoffset = fdt_off_mem_rsvmap(fdt) + offset; + + if (!can_assume(VALID_INPUT)) { + if (absoffset < fdt_off_mem_rsvmap(fdt)) + return NULL; + if (absoffset > fdt_totalsize(fdt) - + sizeof(struct fdt_reserve_entry)) + return NULL; + } + return fdt_mem_rsv_(fdt, n); +} + +int fdt_get_mem_rsv(const void *fdt, int n, uint64_t *address, uint64_t *size) +{ + const struct fdt_reserve_entry *re; + + FDT_RO_PROBE(fdt); + re = fdt_mem_rsv(fdt, n); + if (!can_assume(VALID_INPUT) && !re) + return -FDT_ERR_BADOFFSET; + + *address = fdt64_ld(&re->address); + *size = fdt64_ld(&re->size); + return 0; +} + +int fdt_num_mem_rsv(const void *fdt) +{ + int i; + const struct fdt_reserve_entry *re; + + for (i = 0; (re = fdt_mem_rsv(fdt, i)) != NULL; i++) { + if (fdt64_ld(&re->size) == 0) + return i; + } + return -FDT_ERR_TRUNCATED; +} + +static int nextprop_(const void *fdt, int offset) +{ + uint32_t tag; + int nextoffset; + + do { + tag = fdt_next_tag(fdt, offset, &nextoffset); + + switch (tag) { + case FDT_END: + if (nextoffset >= 0) + return -FDT_ERR_BADSTRUCTURE; + else + return nextoffset; + + case FDT_PROP: + return offset; + } + offset = nextoffset; + } while (tag == FDT_NOP); + + return -FDT_ERR_NOTFOUND; +} + +int fdt_subnode_offset_namelen(const void *fdt, int offset, + const char *name, int namelen) +{ + int depth; + + FDT_RO_PROBE(fdt); + + for (depth = 0; + (offset >= 0) && (depth >= 0); + offset = fdt_next_node(fdt, offset, &depth)) + if ((depth == 1) + && fdt_nodename_eq_(fdt, offset, name, namelen)) + return offset; + + if (depth < 0) + return -FDT_ERR_NOTFOUND; + return offset; /* error */ +} + +int fdt_subnode_offset(const void *fdt, int parentoffset, + const char *name) +{ + return fdt_subnode_offset_namelen(fdt, parentoffset, name, strlen(name)); +} + +int fdt_path_offset_namelen(const void *fdt, const char *path, int namelen) +{ + const char *end = path + namelen; + const char *p = path; + int offset = 0; + + FDT_RO_PROBE(fdt); + + /* see if we have an alias */ + if (*path != '/') { + const char *q = memchr(path, '/', end - p); + + if (!q) + q = end; + + p = fdt_get_alias_namelen(fdt, p, q - p); + if (!p) + return -FDT_ERR_BADPATH; + offset = fdt_path_offset(fdt, p); + + p = q; + } + + while (p < end) { + const char *q; + + while (*p == '/') { + p++; + if (p == end) + return offset; + } + q = memchr(p, '/', end - p); + if (! q) + q = end; + + offset = fdt_subnode_offset_namelen(fdt, offset, p, q-p); + if (offset < 0) + return offset; + + p = q; + } + + return offset; +} + +int fdt_path_offset(const void *fdt, const char *path) +{ + return fdt_path_offset_namelen(fdt, path, strlen(path)); +} + +const char *fdt_get_name(const void *fdt, int nodeoffset, int *len) +{ + const struct fdt_node_header *nh = fdt_offset_ptr_(fdt, nodeoffset); + const char *nameptr; + int err; + + if (((err = fdt_ro_probe_(fdt)) < 0) + || ((err = fdt_check_node_offset_(fdt, nodeoffset)) < 0)) + goto fail; + + nameptr = nh->name; + + if (!can_assume(LATEST) && fdt_version(fdt) < 0x10) { + /* + * For old FDT versions, match the naming conventions of V16: + * give only the leaf name (after all /). The actual tree + * contents are loosely checked. + */ + const char *leaf; + leaf = strrchr(nameptr, '/'); + if (leaf == NULL) { + err = -FDT_ERR_BADSTRUCTURE; + goto fail; + } + nameptr = leaf+1; + } + + if (len) + *len = strlen(nameptr); + + return nameptr; + + fail: + if (len) + *len = err; + return NULL; +} + +int fdt_first_property_offset(const void *fdt, int nodeoffset) +{ + int offset; + + if ((offset = fdt_check_node_offset_(fdt, nodeoffset)) < 0) + return offset; + + return nextprop_(fdt, offset); +} + +int fdt_next_property_offset(const void *fdt, int offset) +{ + if ((offset = fdt_check_prop_offset_(fdt, offset)) < 0) + return offset; + + return nextprop_(fdt, offset); +} + +static const struct fdt_property *fdt_get_property_by_offset_(const void *fdt, + int offset, + int *lenp) +{ + int err; + const struct fdt_property *prop; + + if (!can_assume(VALID_INPUT) && + (err = fdt_check_prop_offset_(fdt, offset)) < 0) { + if (lenp) + *lenp = err; + return NULL; + } + + prop = fdt_offset_ptr_(fdt, offset); + + if (lenp) + *lenp = fdt32_ld(&prop->len); + + return prop; +} + +const struct fdt_property *fdt_get_property_by_offset(const void *fdt, + int offset, + int *lenp) +{ + /* Prior to version 16, properties may need realignment + * and this API does not work. fdt_getprop_*() will, however. */ + + if (!can_assume(LATEST) && fdt_version(fdt) < 0x10) { + if (lenp) + *lenp = -FDT_ERR_BADVERSION; + return NULL; + } + + return fdt_get_property_by_offset_(fdt, offset, lenp); +} + +static const struct fdt_property *fdt_get_property_namelen_(const void *fdt, + int offset, + const char *name, + int namelen, + int *lenp, + int *poffset) +{ + for (offset = fdt_first_property_offset(fdt, offset); + (offset >= 0); + (offset = fdt_next_property_offset(fdt, offset))) { + const struct fdt_property *prop; + + prop = fdt_get_property_by_offset_(fdt, offset, lenp); + if (!can_assume(LIBFDT_FLAWLESS) && !prop) { + offset = -FDT_ERR_INTERNAL; + break; + } + if (fdt_string_eq_(fdt, fdt32_ld(&prop->nameoff), + name, namelen)) { + if (poffset) + *poffset = offset; + return prop; + } + } + + if (lenp) + *lenp = offset; + return NULL; +} + + +const struct fdt_property *fdt_get_property_namelen(const void *fdt, + int offset, + const char *name, + int namelen, int *lenp) +{ + /* Prior to version 16, properties may need realignment + * and this API does not work. fdt_getprop_*() will, however. */ + if (!can_assume(LATEST) && fdt_version(fdt) < 0x10) { + if (lenp) + *lenp = -FDT_ERR_BADVERSION; + return NULL; + } + + return fdt_get_property_namelen_(fdt, offset, name, namelen, lenp, + NULL); +} + + +const struct fdt_property *fdt_get_property(const void *fdt, + int nodeoffset, + const char *name, int *lenp) +{ + return fdt_get_property_namelen(fdt, nodeoffset, name, + strlen(name), lenp); +} + +const void *fdt_getprop_namelen(const void *fdt, int nodeoffset, + const char *name, int namelen, int *lenp) +{ + int poffset; + const struct fdt_property *prop; + + prop = fdt_get_property_namelen_(fdt, nodeoffset, name, namelen, lenp, + &poffset); + if (!prop) + return NULL; + + /* Handle realignment */ + if (!can_assume(LATEST) && fdt_version(fdt) < 0x10 && + (poffset + sizeof(*prop)) % 8 && fdt32_ld(&prop->len) >= 8) + return prop->data + 4; + return prop->data; +} + +const void *fdt_getprop_by_offset(const void *fdt, int offset, + const char **namep, int *lenp) +{ + const struct fdt_property *prop; + + prop = fdt_get_property_by_offset_(fdt, offset, lenp); + if (!prop) + return NULL; + if (namep) { + const char *name; + int namelen; + + if (!can_assume(VALID_INPUT)) { + name = fdt_get_string(fdt, fdt32_ld(&prop->nameoff), + &namelen); + if (!name) { + if (lenp) + *lenp = namelen; + return NULL; + } + *namep = name; + } else { + *namep = fdt_string(fdt, fdt32_ld(&prop->nameoff)); + } + } + + /* Handle realignment */ + if (!can_assume(LATEST) && fdt_version(fdt) < 0x10 && + (offset + sizeof(*prop)) % 8 && fdt32_ld(&prop->len) >= 8) + return prop->data + 4; + return prop->data; +} + +const void *fdt_getprop(const void *fdt, int nodeoffset, + const char *name, int *lenp) +{ + return fdt_getprop_namelen(fdt, nodeoffset, name, strlen(name), lenp); +} + +uint32_t fdt_get_phandle(const void *fdt, int nodeoffset) +{ + const fdt32_t *php; + int len; + + /* FIXME: This is a bit sub-optimal, since we potentially scan + * over all the properties twice. */ + php = fdt_getprop(fdt, nodeoffset, "phandle", &len); + if (!php || (len != sizeof(*php))) { + php = fdt_getprop(fdt, nodeoffset, "linux,phandle", &len); + if (!php || (len != sizeof(*php))) + return 0; + } + + return fdt32_ld(php); +} + +const char *fdt_get_alias_namelen(const void *fdt, + const char *name, int namelen) +{ + int aliasoffset; + + aliasoffset = fdt_path_offset(fdt, "/aliases"); + if (aliasoffset < 0) + return NULL; + + return fdt_getprop_namelen(fdt, aliasoffset, name, namelen, NULL); +} + +const char *fdt_get_alias(const void *fdt, const char *name) +{ + return fdt_get_alias_namelen(fdt, name, strlen(name)); +} + +int fdt_get_path(const void *fdt, int nodeoffset, char *buf, int buflen) +{ + int pdepth = 0, p = 0; + int offset, depth, namelen; + const char *name; + + FDT_RO_PROBE(fdt); + + if (buflen < 2) + return -FDT_ERR_NOSPACE; + + for (offset = 0, depth = 0; + (offset >= 0) && (offset <= nodeoffset); + offset = fdt_next_node(fdt, offset, &depth)) { + while (pdepth > depth) { + do { + p--; + } while (buf[p-1] != '/'); + pdepth--; + } + + if (pdepth >= depth) { + name = fdt_get_name(fdt, offset, &namelen); + if (!name) + return namelen; + if ((p + namelen + 1) <= buflen) { + memcpy(buf + p, name, namelen); + p += namelen; + buf[p++] = '/'; + pdepth++; + } + } + + if (offset == nodeoffset) { + if (pdepth < (depth + 1)) + return -FDT_ERR_NOSPACE; + + if (p > 1) /* special case so that root path is "/", not "" */ + p--; + buf[p] = '\0'; + return 0; + } + } + + if ((offset == -FDT_ERR_NOTFOUND) || (offset >= 0)) + return -FDT_ERR_BADOFFSET; + else if (offset == -FDT_ERR_BADOFFSET) + return -FDT_ERR_BADSTRUCTURE; + + return offset; /* error from fdt_next_node() */ +} + +int fdt_supernode_atdepth_offset(const void *fdt, int nodeoffset, + int supernodedepth, int *nodedepth) +{ + int offset, depth; + int supernodeoffset = -FDT_ERR_INTERNAL; + + FDT_RO_PROBE(fdt); + + if (supernodedepth < 0) + return -FDT_ERR_NOTFOUND; + + for (offset = 0, depth = 0; + (offset >= 0) && (offset <= nodeoffset); + offset = fdt_next_node(fdt, offset, &depth)) { + if (depth == supernodedepth) + supernodeoffset = offset; + + if (offset == nodeoffset) { + if (nodedepth) + *nodedepth = depth; + + if (supernodedepth > depth) + return -FDT_ERR_NOTFOUND; + else + return supernodeoffset; + } + } + + if (!can_assume(VALID_INPUT)) { + if ((offset == -FDT_ERR_NOTFOUND) || (offset >= 0)) + return -FDT_ERR_BADOFFSET; + else if (offset == -FDT_ERR_BADOFFSET) + return -FDT_ERR_BADSTRUCTURE; + } + + return offset; /* error from fdt_next_node() */ +} + +int fdt_node_depth(const void *fdt, int nodeoffset) +{ + int nodedepth; + int err; + + err = fdt_supernode_atdepth_offset(fdt, nodeoffset, 0, &nodedepth); + if (err) + return (can_assume(LIBFDT_FLAWLESS) || err < 0) ? err : + -FDT_ERR_INTERNAL; + return nodedepth; +} + +int fdt_parent_offset(const void *fdt, int nodeoffset) +{ + int nodedepth = fdt_node_depth(fdt, nodeoffset); + + if (nodedepth < 0) + return nodedepth; + return fdt_supernode_atdepth_offset(fdt, nodeoffset, + nodedepth - 1, NULL); +} + +int fdt_node_offset_by_prop_value(const void *fdt, int startoffset, + const char *propname, + const void *propval, int proplen) +{ + int offset; + const void *val; + int len; + + FDT_RO_PROBE(fdt); + + /* FIXME: The algorithm here is pretty horrible: we scan each + * property of a node in fdt_getprop(), then if that didn't + * find what we want, we scan over them again making our way + * to the next node. Still it's the easiest to implement + * approach; performance can come later. */ + for (offset = fdt_next_node(fdt, startoffset, NULL); + offset >= 0; + offset = fdt_next_node(fdt, offset, NULL)) { + val = fdt_getprop(fdt, offset, propname, &len); + if (val && (len == proplen) + && (memcmp(val, propval, len) == 0)) + return offset; + } + + return offset; /* error from fdt_next_node() */ +} + +int fdt_node_offset_by_phandle(const void *fdt, uint32_t phandle) +{ + int offset; + + if ((phandle == 0) || (phandle == ~0U)) + return -FDT_ERR_BADPHANDLE; + + FDT_RO_PROBE(fdt); + + /* FIXME: The algorithm here is pretty horrible: we + * potentially scan each property of a node in + * fdt_get_phandle(), then if that didn't find what + * we want, we scan over them again making our way to the next + * node. Still it's the easiest to implement approach; + * performance can come later. */ + for (offset = fdt_next_node(fdt, -1, NULL); + offset >= 0; + offset = fdt_next_node(fdt, offset, NULL)) { + if (fdt_get_phandle(fdt, offset) == phandle) + return offset; + } + + return offset; /* error from fdt_next_node() */ +} + +int fdt_stringlist_contains(const char *strlist, int listlen, const char *str) +{ + int len = strlen(str); + const char *p; + + while (listlen >= len) { + if (memcmp(str, strlist, len+1) == 0) + return 1; + p = memchr(strlist, '\0', listlen); + if (!p) + return 0; /* malformed strlist.. */ + listlen -= (p-strlist) + 1; + strlist = p + 1; + } + return 0; +} + +int fdt_stringlist_count(const void *fdt, int nodeoffset, const char *property) +{ + const char *list, *end; + int length, count = 0; + + list = fdt_getprop(fdt, nodeoffset, property, &length); + if (!list) + return length; + + end = list + length; + + while (list < end) { + length = strnlen(list, end - list) + 1; + + /* Abort if the last string isn't properly NUL-terminated. */ + if (list + length > end) + return -FDT_ERR_BADVALUE; + + list += length; + count++; + } + + return count; +} + +int fdt_stringlist_search(const void *fdt, int nodeoffset, const char *property, + const char *string) +{ + int length, len, idx = 0; + const char *list, *end; + + list = fdt_getprop(fdt, nodeoffset, property, &length); + if (!list) + return length; + + len = strlen(string) + 1; + end = list + length; + + while (list < end) { + length = strnlen(list, end - list) + 1; + + /* Abort if the last string isn't properly NUL-terminated. */ + if (list + length > end) + return -FDT_ERR_BADVALUE; + + if (length == len && memcmp(list, string, length) == 0) + return idx; + + list += length; + idx++; + } + + return -FDT_ERR_NOTFOUND; +} + +const char *fdt_stringlist_get(const void *fdt, int nodeoffset, + const char *property, int idx, + int *lenp) +{ + const char *list, *end; + int length; + + list = fdt_getprop(fdt, nodeoffset, property, &length); + if (!list) { + if (lenp) + *lenp = length; + + return NULL; + } + + end = list + length; + + while (list < end) { + length = strnlen(list, end - list) + 1; + + /* Abort if the last string isn't properly NUL-terminated. */ + if (list + length > end) { + if (lenp) + *lenp = -FDT_ERR_BADVALUE; + + return NULL; + } + + if (idx == 0) { + if (lenp) + *lenp = length - 1; + + return list; + } + + list += length; + idx--; + } + + if (lenp) + *lenp = -FDT_ERR_NOTFOUND; + + return NULL; +} + +int fdt_node_check_compatible(const void *fdt, int nodeoffset, + const char *compatible) +{ + const void *prop; + int len; + + prop = fdt_getprop(fdt, nodeoffset, "compatible", &len); + if (!prop) + return len; + + return !fdt_stringlist_contains(prop, len, compatible); +} + +int fdt_node_offset_by_compatible(const void *fdt, int startoffset, + const char *compatible) +{ + int offset, err; + + FDT_RO_PROBE(fdt); + + /* FIXME: The algorithm here is pretty horrible: we scan each + * property of a node in fdt_node_check_compatible(), then if + * that didn't find what we want, we scan over them again + * making our way to the next node. Still it's the easiest to + * implement approach; performance can come later. */ + for (offset = fdt_next_node(fdt, startoffset, NULL); + offset >= 0; + offset = fdt_next_node(fdt, offset, NULL)) { + err = fdt_node_check_compatible(fdt, offset, compatible); + if ((err < 0) && (err != -FDT_ERR_NOTFOUND)) + return err; + else if (err == 0) + return offset; + } + + return offset; /* error from fdt_next_node() */ +} diff --git a/scripts/dtc/libfdt/fdt_rw.c b/scripts/dtc/libfdt/fdt_rw.c new file mode 100644 index 000000000..68887b969 --- /dev/null +++ b/scripts/dtc/libfdt/fdt_rw.c @@ -0,0 +1,492 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-2-Clause) +/* + * libfdt - Flat Device Tree manipulation + * Copyright (C) 2006 David Gibson, IBM Corporation. + */ +#include "libfdt_env.h" + +#include <fdt.h> +#include <libfdt.h> + +#include "libfdt_internal.h" + +static int fdt_blocks_misordered_(const void *fdt, + int mem_rsv_size, int struct_size) +{ + return (fdt_off_mem_rsvmap(fdt) < FDT_ALIGN(sizeof(struct fdt_header), 8)) + || (fdt_off_dt_struct(fdt) < + (fdt_off_mem_rsvmap(fdt) + mem_rsv_size)) + || (fdt_off_dt_strings(fdt) < + (fdt_off_dt_struct(fdt) + struct_size)) + || (fdt_totalsize(fdt) < + (fdt_off_dt_strings(fdt) + fdt_size_dt_strings(fdt))); +} + +static int fdt_rw_probe_(void *fdt) +{ + if (can_assume(VALID_DTB)) + return 0; + FDT_RO_PROBE(fdt); + + if (!can_assume(LATEST) && fdt_version(fdt) < 17) + return -FDT_ERR_BADVERSION; + if (fdt_blocks_misordered_(fdt, sizeof(struct fdt_reserve_entry), + fdt_size_dt_struct(fdt))) + return -FDT_ERR_BADLAYOUT; + if (!can_assume(LATEST) && fdt_version(fdt) > 17) + fdt_set_version(fdt, 17); + + return 0; +} + +#define FDT_RW_PROBE(fdt) \ + { \ + int err_; \ + if ((err_ = fdt_rw_probe_(fdt)) != 0) \ + return err_; \ + } + +static inline unsigned int fdt_data_size_(void *fdt) +{ + return fdt_off_dt_strings(fdt) + fdt_size_dt_strings(fdt); +} + +static int fdt_splice_(void *fdt, void *splicepoint, int oldlen, int newlen) +{ + char *p = splicepoint; + unsigned int dsize = fdt_data_size_(fdt); + size_t soff = p - (char *)fdt; + + if ((oldlen < 0) || (soff + oldlen < soff) || (soff + oldlen > dsize)) + return -FDT_ERR_BADOFFSET; + if ((p < (char *)fdt) || (dsize + newlen < (unsigned)oldlen)) + return -FDT_ERR_BADOFFSET; + if (dsize - oldlen + newlen > fdt_totalsize(fdt)) + return -FDT_ERR_NOSPACE; + memmove(p + newlen, p + oldlen, ((char *)fdt + dsize) - (p + oldlen)); + return 0; +} + +static int fdt_splice_mem_rsv_(void *fdt, struct fdt_reserve_entry *p, + int oldn, int newn) +{ + int delta = (newn - oldn) * sizeof(*p); + int err; + err = fdt_splice_(fdt, p, oldn * sizeof(*p), newn * sizeof(*p)); + if (err) + return err; + fdt_set_off_dt_struct(fdt, fdt_off_dt_struct(fdt) + delta); + fdt_set_off_dt_strings(fdt, fdt_off_dt_strings(fdt) + delta); + return 0; +} + +static int fdt_splice_struct_(void *fdt, void *p, + int oldlen, int newlen) +{ + int delta = newlen - oldlen; + int err; + + if ((err = fdt_splice_(fdt, p, oldlen, newlen))) + return err; + + fdt_set_size_dt_struct(fdt, fdt_size_dt_struct(fdt) + delta); + fdt_set_off_dt_strings(fdt, fdt_off_dt_strings(fdt) + delta); + return 0; +} + +/* Must only be used to roll back in case of error */ +static void fdt_del_last_string_(void *fdt, const char *s) +{ + int newlen = strlen(s) + 1; + + fdt_set_size_dt_strings(fdt, fdt_size_dt_strings(fdt) - newlen); +} + +static int fdt_splice_string_(void *fdt, int newlen) +{ + void *p = (char *)fdt + + fdt_off_dt_strings(fdt) + fdt_size_dt_strings(fdt); + int err; + + if ((err = fdt_splice_(fdt, p, 0, newlen))) + return err; + + fdt_set_size_dt_strings(fdt, fdt_size_dt_strings(fdt) + newlen); + return 0; +} + +/** + * fdt_find_add_string_() - Find or allocate a string + * + * @fdt: pointer to the device tree to check/adjust + * @s: string to find/add + * @allocated: Set to 0 if the string was found, 1 if not found and so + * allocated. Ignored if can_assume(NO_ROLLBACK) + * @return offset of string in the string table (whether found or added) + */ +static int fdt_find_add_string_(void *fdt, const char *s, int *allocated) +{ + char *strtab = (char *)fdt + fdt_off_dt_strings(fdt); + const char *p; + char *new; + int len = strlen(s) + 1; + int err; + + if (!can_assume(NO_ROLLBACK)) + *allocated = 0; + + p = fdt_find_string_(strtab, fdt_size_dt_strings(fdt), s); + if (p) + /* found it */ + return (p - strtab); + + new = strtab + fdt_size_dt_strings(fdt); + err = fdt_splice_string_(fdt, len); + if (err) + return err; + + if (!can_assume(NO_ROLLBACK)) + *allocated = 1; + + memcpy(new, s, len); + return (new - strtab); +} + +int fdt_add_mem_rsv(void *fdt, uint64_t address, uint64_t size) +{ + struct fdt_reserve_entry *re; + int err; + + FDT_RW_PROBE(fdt); + + re = fdt_mem_rsv_w_(fdt, fdt_num_mem_rsv(fdt)); + err = fdt_splice_mem_rsv_(fdt, re, 0, 1); + if (err) + return err; + + re->address = cpu_to_fdt64(address); + re->size = cpu_to_fdt64(size); + return 0; +} + +int fdt_del_mem_rsv(void *fdt, int n) +{ + struct fdt_reserve_entry *re = fdt_mem_rsv_w_(fdt, n); + + FDT_RW_PROBE(fdt); + + if (n >= fdt_num_mem_rsv(fdt)) + return -FDT_ERR_NOTFOUND; + + return fdt_splice_mem_rsv_(fdt, re, 1, 0); +} + +static int fdt_resize_property_(void *fdt, int nodeoffset, const char *name, + int len, struct fdt_property **prop) +{ + int oldlen; + int err; + + *prop = fdt_get_property_w(fdt, nodeoffset, name, &oldlen); + if (!*prop) + return oldlen; + + if ((err = fdt_splice_struct_(fdt, (*prop)->data, FDT_TAGALIGN(oldlen), + FDT_TAGALIGN(len)))) + return err; + + (*prop)->len = cpu_to_fdt32(len); + return 0; +} + +static int fdt_add_property_(void *fdt, int nodeoffset, const char *name, + int len, struct fdt_property **prop) +{ + int proplen; + int nextoffset; + int namestroff; + int err; + int allocated; + + if ((nextoffset = fdt_check_node_offset_(fdt, nodeoffset)) < 0) + return nextoffset; + + namestroff = fdt_find_add_string_(fdt, name, &allocated); + if (namestroff < 0) + return namestroff; + + *prop = fdt_offset_ptr_w_(fdt, nextoffset); + proplen = sizeof(**prop) + FDT_TAGALIGN(len); + + err = fdt_splice_struct_(fdt, *prop, 0, proplen); + if (err) { + /* Delete the string if we failed to add it */ + if (!can_assume(NO_ROLLBACK) && allocated) + fdt_del_last_string_(fdt, name); + return err; + } + + (*prop)->tag = cpu_to_fdt32(FDT_PROP); + (*prop)->nameoff = cpu_to_fdt32(namestroff); + (*prop)->len = cpu_to_fdt32(len); + return 0; +} + +int fdt_set_name(void *fdt, int nodeoffset, const char *name) +{ + char *namep; + int oldlen, newlen; + int err; + + FDT_RW_PROBE(fdt); + + namep = (char *)(uintptr_t)fdt_get_name(fdt, nodeoffset, &oldlen); + if (!namep) + return oldlen; + + newlen = strlen(name); + + err = fdt_splice_struct_(fdt, namep, FDT_TAGALIGN(oldlen+1), + FDT_TAGALIGN(newlen+1)); + if (err) + return err; + + memcpy(namep, name, newlen+1); + return 0; +} + +int fdt_setprop_placeholder(void *fdt, int nodeoffset, const char *name, + int len, void **prop_data) +{ + struct fdt_property *prop; + int err; + + FDT_RW_PROBE(fdt); + + err = fdt_resize_property_(fdt, nodeoffset, name, len, &prop); + if (err == -FDT_ERR_NOTFOUND) + err = fdt_add_property_(fdt, nodeoffset, name, len, &prop); + if (err) + return err; + + *prop_data = prop->data; + return 0; +} + +int fdt_setprop(void *fdt, int nodeoffset, const char *name, + const void *val, int len) +{ + void *prop_data; + int err; + + err = fdt_setprop_placeholder(fdt, nodeoffset, name, len, &prop_data); + if (err) + return err; + + if (len) + memcpy(prop_data, val, len); + return 0; +} + +int fdt_appendprop(void *fdt, int nodeoffset, const char *name, + const void *val, int len) +{ + struct fdt_property *prop; + int err, oldlen, newlen; + + FDT_RW_PROBE(fdt); + + prop = fdt_get_property_w(fdt, nodeoffset, name, &oldlen); + if (prop) { + newlen = len + oldlen; + err = fdt_splice_struct_(fdt, prop->data, + FDT_TAGALIGN(oldlen), + FDT_TAGALIGN(newlen)); + if (err) + return err; + prop->len = cpu_to_fdt32(newlen); + memcpy(prop->data + oldlen, val, len); + } else { + err = fdt_add_property_(fdt, nodeoffset, name, len, &prop); + if (err) + return err; + memcpy(prop->data, val, len); + } + return 0; +} + +int fdt_delprop(void *fdt, int nodeoffset, const char *name) +{ + struct fdt_property *prop; + int len, proplen; + + FDT_RW_PROBE(fdt); + + prop = fdt_get_property_w(fdt, nodeoffset, name, &len); + if (!prop) + return len; + + proplen = sizeof(*prop) + FDT_TAGALIGN(len); + return fdt_splice_struct_(fdt, prop, proplen, 0); +} + +int fdt_add_subnode_namelen(void *fdt, int parentoffset, + const char *name, int namelen) +{ + struct fdt_node_header *nh; + int offset, nextoffset; + int nodelen; + int err; + uint32_t tag; + fdt32_t *endtag; + + FDT_RW_PROBE(fdt); + + offset = fdt_subnode_offset_namelen(fdt, parentoffset, name, namelen); + if (offset >= 0) + return -FDT_ERR_EXISTS; + else if (offset != -FDT_ERR_NOTFOUND) + return offset; + + /* Try to place the new node after the parent's properties */ + fdt_next_tag(fdt, parentoffset, &nextoffset); /* skip the BEGIN_NODE */ + do { + offset = nextoffset; + tag = fdt_next_tag(fdt, offset, &nextoffset); + } while ((tag == FDT_PROP) || (tag == FDT_NOP)); + + nh = fdt_offset_ptr_w_(fdt, offset); + nodelen = sizeof(*nh) + FDT_TAGALIGN(namelen+1) + FDT_TAGSIZE; + + err = fdt_splice_struct_(fdt, nh, 0, nodelen); + if (err) + return err; + + nh->tag = cpu_to_fdt32(FDT_BEGIN_NODE); + memset(nh->name, 0, FDT_TAGALIGN(namelen+1)); + memcpy(nh->name, name, namelen); + endtag = (fdt32_t *)((char *)nh + nodelen - FDT_TAGSIZE); + *endtag = cpu_to_fdt32(FDT_END_NODE); + + return offset; +} + +int fdt_add_subnode(void *fdt, int parentoffset, const char *name) +{ + return fdt_add_subnode_namelen(fdt, parentoffset, name, strlen(name)); +} + +int fdt_del_node(void *fdt, int nodeoffset) +{ + int endoffset; + + FDT_RW_PROBE(fdt); + + endoffset = fdt_node_end_offset_(fdt, nodeoffset); + if (endoffset < 0) + return endoffset; + + return fdt_splice_struct_(fdt, fdt_offset_ptr_w_(fdt, nodeoffset), + endoffset - nodeoffset, 0); +} + +static void fdt_packblocks_(const char *old, char *new, + int mem_rsv_size, int struct_size) +{ + int mem_rsv_off, struct_off, strings_off; + + mem_rsv_off = FDT_ALIGN(sizeof(struct fdt_header), 8); + struct_off = mem_rsv_off + mem_rsv_size; + strings_off = struct_off + struct_size; + + memmove(new + mem_rsv_off, old + fdt_off_mem_rsvmap(old), mem_rsv_size); + fdt_set_off_mem_rsvmap(new, mem_rsv_off); + + memmove(new + struct_off, old + fdt_off_dt_struct(old), struct_size); + fdt_set_off_dt_struct(new, struct_off); + fdt_set_size_dt_struct(new, struct_size); + + memmove(new + strings_off, old + fdt_off_dt_strings(old), + fdt_size_dt_strings(old)); + fdt_set_off_dt_strings(new, strings_off); + fdt_set_size_dt_strings(new, fdt_size_dt_strings(old)); +} + +int fdt_open_into(const void *fdt, void *buf, int bufsize) +{ + int err; + int mem_rsv_size, struct_size; + int newsize; + const char *fdtstart = fdt; + const char *fdtend = fdtstart + fdt_totalsize(fdt); + char *tmp; + + FDT_RO_PROBE(fdt); + + mem_rsv_size = (fdt_num_mem_rsv(fdt)+1) + * sizeof(struct fdt_reserve_entry); + + if (can_assume(LATEST) || fdt_version(fdt) >= 17) { + struct_size = fdt_size_dt_struct(fdt); + } else { + struct_size = 0; + while (fdt_next_tag(fdt, struct_size, &struct_size) != FDT_END) + ; + if (struct_size < 0) + return struct_size; + } + + if (can_assume(LIBFDT_ORDER) || + !fdt_blocks_misordered_(fdt, mem_rsv_size, struct_size)) { + /* no further work necessary */ + err = fdt_move(fdt, buf, bufsize); + if (err) + return err; + fdt_set_version(buf, 17); + fdt_set_size_dt_struct(buf, struct_size); + fdt_set_totalsize(buf, bufsize); + return 0; + } + + /* Need to reorder */ + newsize = FDT_ALIGN(sizeof(struct fdt_header), 8) + mem_rsv_size + + struct_size + fdt_size_dt_strings(fdt); + + if (bufsize < newsize) + return -FDT_ERR_NOSPACE; + + /* First attempt to build converted tree at beginning of buffer */ + tmp = buf; + /* But if that overlaps with the old tree... */ + if (((tmp + newsize) > fdtstart) && (tmp < fdtend)) { + /* Try right after the old tree instead */ + tmp = (char *)(uintptr_t)fdtend; + if ((tmp + newsize) > ((char *)buf + bufsize)) + return -FDT_ERR_NOSPACE; + } + + fdt_packblocks_(fdt, tmp, mem_rsv_size, struct_size); + memmove(buf, tmp, newsize); + + fdt_set_magic(buf, FDT_MAGIC); + fdt_set_totalsize(buf, bufsize); + fdt_set_version(buf, 17); + fdt_set_last_comp_version(buf, 16); + fdt_set_boot_cpuid_phys(buf, fdt_boot_cpuid_phys(fdt)); + + return 0; +} + +int fdt_pack(void *fdt) +{ + int mem_rsv_size; + + FDT_RW_PROBE(fdt); + + mem_rsv_size = (fdt_num_mem_rsv(fdt)+1) + * sizeof(struct fdt_reserve_entry); + fdt_packblocks_(fdt, fdt, mem_rsv_size, fdt_size_dt_struct(fdt)); + fdt_set_totalsize(fdt, fdt_data_size_(fdt)); + + return 0; +} diff --git a/scripts/dtc/libfdt/fdt_strerror.c b/scripts/dtc/libfdt/fdt_strerror.c new file mode 100644 index 000000000..b4356931b --- /dev/null +++ b/scripts/dtc/libfdt/fdt_strerror.c @@ -0,0 +1,59 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-2-Clause) +/* + * libfdt - Flat Device Tree manipulation + * Copyright (C) 2006 David Gibson, IBM Corporation. + * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ +#include "libfdt_env.h" + +#include <fdt.h> +#include <libfdt.h> + +#include "libfdt_internal.h" + +struct fdt_errtabent { + const char *str; +}; + +#define FDT_ERRTABENT(val) \ + [(val)] = { .str = #val, } + +static struct fdt_errtabent fdt_errtable[] = { + FDT_ERRTABENT(FDT_ERR_NOTFOUND), + FDT_ERRTABENT(FDT_ERR_EXISTS), + FDT_ERRTABENT(FDT_ERR_NOSPACE), + + FDT_ERRTABENT(FDT_ERR_BADOFFSET), + FDT_ERRTABENT(FDT_ERR_BADPATH), + FDT_ERRTABENT(FDT_ERR_BADPHANDLE), + FDT_ERRTABENT(FDT_ERR_BADSTATE), + + FDT_ERRTABENT(FDT_ERR_TRUNCATED), + FDT_ERRTABENT(FDT_ERR_BADMAGIC), + FDT_ERRTABENT(FDT_ERR_BADVERSION), + FDT_ERRTABENT(FDT_ERR_BADSTRUCTURE), + FDT_ERRTABENT(FDT_ERR_BADLAYOUT), + FDT_ERRTABENT(FDT_ERR_INTERNAL), + FDT_ERRTABENT(FDT_ERR_BADNCELLS), + FDT_ERRTABENT(FDT_ERR_BADVALUE), + FDT_ERRTABENT(FDT_ERR_BADOVERLAY), + FDT_ERRTABENT(FDT_ERR_NOPHANDLES), + FDT_ERRTABENT(FDT_ERR_BADFLAGS), +}; +#define FDT_ERRTABSIZE ((int)(sizeof(fdt_errtable) / sizeof(fdt_errtable[0]))) + +const char *fdt_strerror(int errval) +{ + if (errval > 0) + return "<valid offset/length>"; + else if (errval == 0) + return "<no error>"; + else if (-errval < FDT_ERRTABSIZE) { + const char *s = fdt_errtable[-errval].str; + + if (s) + return s; + } + + return "<unknown error>"; +} diff --git a/scripts/dtc/libfdt/fdt_sw.c b/scripts/dtc/libfdt/fdt_sw.c new file mode 100644 index 000000000..68b543c4d --- /dev/null +++ b/scripts/dtc/libfdt/fdt_sw.c @@ -0,0 +1,384 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-2-Clause) +/* + * libfdt - Flat Device Tree manipulation + * Copyright (C) 2006 David Gibson, IBM Corporation. + */ +#include "libfdt_env.h" + +#include <fdt.h> +#include <libfdt.h> + +#include "libfdt_internal.h" + +static int fdt_sw_probe_(void *fdt) +{ + if (!can_assume(VALID_INPUT)) { + if (fdt_magic(fdt) == FDT_MAGIC) + return -FDT_ERR_BADSTATE; + else if (fdt_magic(fdt) != FDT_SW_MAGIC) + return -FDT_ERR_BADMAGIC; + } + + return 0; +} + +#define FDT_SW_PROBE(fdt) \ + { \ + int err; \ + if ((err = fdt_sw_probe_(fdt)) != 0) \ + return err; \ + } + +/* 'memrsv' state: Initial state after fdt_create() + * + * Allowed functions: + * fdt_add_reservemap_entry() + * fdt_finish_reservemap() [moves to 'struct' state] + */ +static int fdt_sw_probe_memrsv_(void *fdt) +{ + int err = fdt_sw_probe_(fdt); + if (err) + return err; + + if (!can_assume(VALID_INPUT) && fdt_off_dt_strings(fdt) != 0) + return -FDT_ERR_BADSTATE; + return 0; +} + +#define FDT_SW_PROBE_MEMRSV(fdt) \ + { \ + int err; \ + if ((err = fdt_sw_probe_memrsv_(fdt)) != 0) \ + return err; \ + } + +/* 'struct' state: Enter this state after fdt_finish_reservemap() + * + * Allowed functions: + * fdt_begin_node() + * fdt_end_node() + * fdt_property*() + * fdt_finish() [moves to 'complete' state] + */ +static int fdt_sw_probe_struct_(void *fdt) +{ + int err = fdt_sw_probe_(fdt); + if (err) + return err; + + if (!can_assume(VALID_INPUT) && + fdt_off_dt_strings(fdt) != fdt_totalsize(fdt)) + return -FDT_ERR_BADSTATE; + return 0; +} + +#define FDT_SW_PROBE_STRUCT(fdt) \ + { \ + int err; \ + if ((err = fdt_sw_probe_struct_(fdt)) != 0) \ + return err; \ + } + +static inline uint32_t sw_flags(void *fdt) +{ + /* assert: (fdt_magic(fdt) == FDT_SW_MAGIC) */ + return fdt_last_comp_version(fdt); +} + +/* 'complete' state: Enter this state after fdt_finish() + * + * Allowed functions: none + */ + +static void *fdt_grab_space_(void *fdt, size_t len) +{ + unsigned int offset = fdt_size_dt_struct(fdt); + unsigned int spaceleft; + + spaceleft = fdt_totalsize(fdt) - fdt_off_dt_struct(fdt) + - fdt_size_dt_strings(fdt); + + if ((offset + len < offset) || (offset + len > spaceleft)) + return NULL; + + fdt_set_size_dt_struct(fdt, offset + len); + return fdt_offset_ptr_w_(fdt, offset); +} + +int fdt_create_with_flags(void *buf, int bufsize, uint32_t flags) +{ + const int hdrsize = FDT_ALIGN(sizeof(struct fdt_header), + sizeof(struct fdt_reserve_entry)); + void *fdt = buf; + + if (bufsize < hdrsize) + return -FDT_ERR_NOSPACE; + + if (flags & ~FDT_CREATE_FLAGS_ALL) + return -FDT_ERR_BADFLAGS; + + memset(buf, 0, bufsize); + + /* + * magic and last_comp_version keep intermediate state during the fdt + * creation process, which is replaced with the proper FDT format by + * fdt_finish(). + * + * flags should be accessed with sw_flags(). + */ + fdt_set_magic(fdt, FDT_SW_MAGIC); + fdt_set_version(fdt, FDT_LAST_SUPPORTED_VERSION); + fdt_set_last_comp_version(fdt, flags); + + fdt_set_totalsize(fdt, bufsize); + + fdt_set_off_mem_rsvmap(fdt, hdrsize); + fdt_set_off_dt_struct(fdt, fdt_off_mem_rsvmap(fdt)); + fdt_set_off_dt_strings(fdt, 0); + + return 0; +} + +int fdt_create(void *buf, int bufsize) +{ + return fdt_create_with_flags(buf, bufsize, 0); +} + +int fdt_resize(void *fdt, void *buf, int bufsize) +{ + size_t headsize, tailsize; + char *oldtail, *newtail; + + FDT_SW_PROBE(fdt); + + if (bufsize < 0) + return -FDT_ERR_NOSPACE; + + headsize = fdt_off_dt_struct(fdt) + fdt_size_dt_struct(fdt); + tailsize = fdt_size_dt_strings(fdt); + + if (!can_assume(VALID_DTB) && + headsize + tailsize > fdt_totalsize(fdt)) + return -FDT_ERR_INTERNAL; + + if ((headsize + tailsize) > (unsigned)bufsize) + return -FDT_ERR_NOSPACE; + + oldtail = (char *)fdt + fdt_totalsize(fdt) - tailsize; + newtail = (char *)buf + bufsize - tailsize; + + /* Two cases to avoid clobbering data if the old and new + * buffers partially overlap */ + if (buf <= fdt) { + memmove(buf, fdt, headsize); + memmove(newtail, oldtail, tailsize); + } else { + memmove(newtail, oldtail, tailsize); + memmove(buf, fdt, headsize); + } + + fdt_set_totalsize(buf, bufsize); + if (fdt_off_dt_strings(buf)) + fdt_set_off_dt_strings(buf, bufsize); + + return 0; +} + +int fdt_add_reservemap_entry(void *fdt, uint64_t addr, uint64_t size) +{ + struct fdt_reserve_entry *re; + int offset; + + FDT_SW_PROBE_MEMRSV(fdt); + + offset = fdt_off_dt_struct(fdt); + if ((offset + sizeof(*re)) > fdt_totalsize(fdt)) + return -FDT_ERR_NOSPACE; + + re = (struct fdt_reserve_entry *)((char *)fdt + offset); + re->address = cpu_to_fdt64(addr); + re->size = cpu_to_fdt64(size); + + fdt_set_off_dt_struct(fdt, offset + sizeof(*re)); + + return 0; +} + +int fdt_finish_reservemap(void *fdt) +{ + int err = fdt_add_reservemap_entry(fdt, 0, 0); + + if (err) + return err; + + fdt_set_off_dt_strings(fdt, fdt_totalsize(fdt)); + return 0; +} + +int fdt_begin_node(void *fdt, const char *name) +{ + struct fdt_node_header *nh; + int namelen; + + FDT_SW_PROBE_STRUCT(fdt); + + namelen = strlen(name) + 1; + nh = fdt_grab_space_(fdt, sizeof(*nh) + FDT_TAGALIGN(namelen)); + if (! nh) + return -FDT_ERR_NOSPACE; + + nh->tag = cpu_to_fdt32(FDT_BEGIN_NODE); + memcpy(nh->name, name, namelen); + return 0; +} + +int fdt_end_node(void *fdt) +{ + fdt32_t *en; + + FDT_SW_PROBE_STRUCT(fdt); + + en = fdt_grab_space_(fdt, FDT_TAGSIZE); + if (! en) + return -FDT_ERR_NOSPACE; + + *en = cpu_to_fdt32(FDT_END_NODE); + return 0; +} + +static int fdt_add_string_(void *fdt, const char *s) +{ + char *strtab = (char *)fdt + fdt_totalsize(fdt); + unsigned int strtabsize = fdt_size_dt_strings(fdt); + unsigned int len = strlen(s) + 1; + unsigned int struct_top, offset; + + offset = strtabsize + len; + struct_top = fdt_off_dt_struct(fdt) + fdt_size_dt_struct(fdt); + if (fdt_totalsize(fdt) - offset < struct_top) + return 0; /* no more room :( */ + + memcpy(strtab - offset, s, len); + fdt_set_size_dt_strings(fdt, strtabsize + len); + return -offset; +} + +/* Must only be used to roll back in case of error */ +static void fdt_del_last_string_(void *fdt, const char *s) +{ + int strtabsize = fdt_size_dt_strings(fdt); + int len = strlen(s) + 1; + + fdt_set_size_dt_strings(fdt, strtabsize - len); +} + +static int fdt_find_add_string_(void *fdt, const char *s, int *allocated) +{ + char *strtab = (char *)fdt + fdt_totalsize(fdt); + int strtabsize = fdt_size_dt_strings(fdt); + const char *p; + + *allocated = 0; + + p = fdt_find_string_(strtab - strtabsize, strtabsize, s); + if (p) + return p - strtab; + + *allocated = 1; + + return fdt_add_string_(fdt, s); +} + +int fdt_property_placeholder(void *fdt, const char *name, int len, void **valp) +{ + struct fdt_property *prop; + int nameoff; + int allocated; + + FDT_SW_PROBE_STRUCT(fdt); + + /* String de-duplication can be slow, _NO_NAME_DEDUP skips it */ + if (sw_flags(fdt) & FDT_CREATE_FLAG_NO_NAME_DEDUP) { + allocated = 1; + nameoff = fdt_add_string_(fdt, name); + } else { + nameoff = fdt_find_add_string_(fdt, name, &allocated); + } + if (nameoff == 0) + return -FDT_ERR_NOSPACE; + + prop = fdt_grab_space_(fdt, sizeof(*prop) + FDT_TAGALIGN(len)); + if (! prop) { + if (allocated) + fdt_del_last_string_(fdt, name); + return -FDT_ERR_NOSPACE; + } + + prop->tag = cpu_to_fdt32(FDT_PROP); + prop->nameoff = cpu_to_fdt32(nameoff); + prop->len = cpu_to_fdt32(len); + *valp = prop->data; + return 0; +} + +int fdt_property(void *fdt, const char *name, const void *val, int len) +{ + void *ptr; + int ret; + + ret = fdt_property_placeholder(fdt, name, len, &ptr); + if (ret) + return ret; + memcpy(ptr, val, len); + return 0; +} + +int fdt_finish(void *fdt) +{ + char *p = (char *)fdt; + fdt32_t *end; + int oldstroffset, newstroffset; + uint32_t tag; + int offset, nextoffset; + + FDT_SW_PROBE_STRUCT(fdt); + + /* Add terminator */ + end = fdt_grab_space_(fdt, sizeof(*end)); + if (! end) + return -FDT_ERR_NOSPACE; + *end = cpu_to_fdt32(FDT_END); + + /* Relocate the string table */ + oldstroffset = fdt_totalsize(fdt) - fdt_size_dt_strings(fdt); + newstroffset = fdt_off_dt_struct(fdt) + fdt_size_dt_struct(fdt); + memmove(p + newstroffset, p + oldstroffset, fdt_size_dt_strings(fdt)); + fdt_set_off_dt_strings(fdt, newstroffset); + + /* Walk the structure, correcting string offsets */ + offset = 0; + while ((tag = fdt_next_tag(fdt, offset, &nextoffset)) != FDT_END) { + if (tag == FDT_PROP) { + struct fdt_property *prop = + fdt_offset_ptr_w_(fdt, offset); + int nameoff; + + nameoff = fdt32_to_cpu(prop->nameoff); + nameoff += fdt_size_dt_strings(fdt); + prop->nameoff = cpu_to_fdt32(nameoff); + } + offset = nextoffset; + } + if (nextoffset < 0) + return nextoffset; + + /* Finally, adjust the header */ + fdt_set_totalsize(fdt, newstroffset + fdt_size_dt_strings(fdt)); + + /* And fix up fields that were keeping intermediate state. */ + fdt_set_last_comp_version(fdt, FDT_FIRST_SUPPORTED_VERSION); + fdt_set_magic(fdt, FDT_MAGIC); + + return 0; +} diff --git a/scripts/dtc/libfdt/fdt_wip.c b/scripts/dtc/libfdt/fdt_wip.c new file mode 100644 index 000000000..c2d7566a6 --- /dev/null +++ b/scripts/dtc/libfdt/fdt_wip.c @@ -0,0 +1,94 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-2-Clause) +/* + * libfdt - Flat Device Tree manipulation + * Copyright (C) 2006 David Gibson, IBM Corporation. + */ +#include "libfdt_env.h" + +#include <fdt.h> +#include <libfdt.h> + +#include "libfdt_internal.h" + +int fdt_setprop_inplace_namelen_partial(void *fdt, int nodeoffset, + const char *name, int namelen, + uint32_t idx, const void *val, + int len) +{ + void *propval; + int proplen; + + propval = fdt_getprop_namelen_w(fdt, nodeoffset, name, namelen, + &proplen); + if (!propval) + return proplen; + + if ((unsigned)proplen < (len + idx)) + return -FDT_ERR_NOSPACE; + + memcpy((char *)propval + idx, val, len); + return 0; +} + +int fdt_setprop_inplace(void *fdt, int nodeoffset, const char *name, + const void *val, int len) +{ + const void *propval; + int proplen; + + propval = fdt_getprop(fdt, nodeoffset, name, &proplen); + if (!propval) + return proplen; + + if (proplen != len) + return -FDT_ERR_NOSPACE; + + return fdt_setprop_inplace_namelen_partial(fdt, nodeoffset, name, + strlen(name), 0, + val, len); +} + +static void fdt_nop_region_(void *start, int len) +{ + fdt32_t *p; + + for (p = start; (char *)p < ((char *)start + len); p++) + *p = cpu_to_fdt32(FDT_NOP); +} + +int fdt_nop_property(void *fdt, int nodeoffset, const char *name) +{ + struct fdt_property *prop; + int len; + + prop = fdt_get_property_w(fdt, nodeoffset, name, &len); + if (!prop) + return len; + + fdt_nop_region_(prop, len + sizeof(*prop)); + + return 0; +} + +int fdt_node_end_offset_(void *fdt, int offset) +{ + int depth = 0; + + while ((offset >= 0) && (depth >= 0)) + offset = fdt_next_node(fdt, offset, &depth); + + return offset; +} + +int fdt_nop_node(void *fdt, int nodeoffset) +{ + int endoffset; + + endoffset = fdt_node_end_offset_(fdt, nodeoffset); + if (endoffset < 0) + return endoffset; + + fdt_nop_region_(fdt_offset_ptr_w(fdt, nodeoffset, 0), + endoffset - nodeoffset); + return 0; +} diff --git a/scripts/dtc/libfdt/libfdt.h b/scripts/dtc/libfdt/libfdt.h new file mode 100644 index 000000000..fe49b5d78 --- /dev/null +++ b/scripts/dtc/libfdt/libfdt.h @@ -0,0 +1,2080 @@ +/* SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-2-Clause) */ +#ifndef LIBFDT_H +#define LIBFDT_H +/* + * libfdt - Flat Device Tree manipulation + * Copyright (C) 2006 David Gibson, IBM Corporation. + */ + +#include "libfdt_env.h" +#include "fdt.h" + +#ifdef __cplusplus +extern "C" { +#endif + +#define FDT_FIRST_SUPPORTED_VERSION 0x02 +#define FDT_LAST_SUPPORTED_VERSION 0x11 + +/* Error codes: informative error codes */ +#define FDT_ERR_NOTFOUND 1 + /* FDT_ERR_NOTFOUND: The requested node or property does not exist */ +#define FDT_ERR_EXISTS 2 + /* FDT_ERR_EXISTS: Attempted to create a node or property which + * already exists */ +#define FDT_ERR_NOSPACE 3 + /* FDT_ERR_NOSPACE: Operation needed to expand the device + * tree, but its buffer did not have sufficient space to + * contain the expanded tree. Use fdt_open_into() to move the + * device tree to a buffer with more space. */ + +/* Error codes: codes for bad parameters */ +#define FDT_ERR_BADOFFSET 4 + /* FDT_ERR_BADOFFSET: Function was passed a structure block + * offset which is out-of-bounds, or which points to an + * unsuitable part of the structure for the operation. */ +#define FDT_ERR_BADPATH 5 + /* FDT_ERR_BADPATH: Function was passed a badly formatted path + * (e.g. missing a leading / for a function which requires an + * absolute path) */ +#define FDT_ERR_BADPHANDLE 6 + /* FDT_ERR_BADPHANDLE: Function was passed an invalid phandle. + * This can be caused either by an invalid phandle property + * length, or the phandle value was either 0 or -1, which are + * not permitted. */ +#define FDT_ERR_BADSTATE 7 + /* FDT_ERR_BADSTATE: Function was passed an incomplete device + * tree created by the sequential-write functions, which is + * not sufficiently complete for the requested operation. */ + +/* Error codes: codes for bad device tree blobs */ +#define FDT_ERR_TRUNCATED 8 + /* FDT_ERR_TRUNCATED: FDT or a sub-block is improperly + * terminated (overflows, goes outside allowed bounds, or + * isn't properly terminated). */ +#define FDT_ERR_BADMAGIC 9 + /* FDT_ERR_BADMAGIC: Given "device tree" appears not to be a + * device tree at all - it is missing the flattened device + * tree magic number. */ +#define FDT_ERR_BADVERSION 10 + /* FDT_ERR_BADVERSION: Given device tree has a version which + * can't be handled by the requested operation. For + * read-write functions, this may mean that fdt_open_into() is + * required to convert the tree to the expected version. */ +#define FDT_ERR_BADSTRUCTURE 11 + /* FDT_ERR_BADSTRUCTURE: Given device tree has a corrupt + * structure block or other serious error (e.g. misnested + * nodes, or subnodes preceding properties). */ +#define FDT_ERR_BADLAYOUT 12 + /* FDT_ERR_BADLAYOUT: For read-write functions, the given + * device tree has it's sub-blocks in an order that the + * function can't handle (memory reserve map, then structure, + * then strings). Use fdt_open_into() to reorganize the tree + * into a form suitable for the read-write operations. */ + +/* "Can't happen" error indicating a bug in libfdt */ +#define FDT_ERR_INTERNAL 13 + /* FDT_ERR_INTERNAL: libfdt has failed an internal assertion. + * Should never be returned, if it is, it indicates a bug in + * libfdt itself. */ + +/* Errors in device tree content */ +#define FDT_ERR_BADNCELLS 14 + /* FDT_ERR_BADNCELLS: Device tree has a #address-cells, #size-cells + * or similar property with a bad format or value */ + +#define FDT_ERR_BADVALUE 15 + /* FDT_ERR_BADVALUE: Device tree has a property with an unexpected + * value. For example: a property expected to contain a string list + * is not NUL-terminated within the length of its value. */ + +#define FDT_ERR_BADOVERLAY 16 + /* FDT_ERR_BADOVERLAY: The device tree overlay, while + * correctly structured, cannot be applied due to some + * unexpected or missing value, property or node. */ + +#define FDT_ERR_NOPHANDLES 17 + /* FDT_ERR_NOPHANDLES: The device tree doesn't have any + * phandle available anymore without causing an overflow */ + +#define FDT_ERR_BADFLAGS 18 + /* FDT_ERR_BADFLAGS: The function was passed a flags field that + * contains invalid flags or an invalid combination of flags. */ + +#define FDT_ERR_MAX 18 + +/* constants */ +#define FDT_MAX_PHANDLE 0xfffffffe + /* Valid values for phandles range from 1 to 2^32-2. */ + +/**********************************************************************/ +/* Low-level functions (you probably don't need these) */ +/**********************************************************************/ + +#ifndef SWIG /* This function is not useful in Python */ +const void *fdt_offset_ptr(const void *fdt, int offset, unsigned int checklen); +#endif +static inline void *fdt_offset_ptr_w(void *fdt, int offset, int checklen) +{ + return (void *)(uintptr_t)fdt_offset_ptr(fdt, offset, checklen); +} + +uint32_t fdt_next_tag(const void *fdt, int offset, int *nextoffset); + +/* + * Alignment helpers: + * These helpers access words from a device tree blob. They're + * built to work even with unaligned pointers on platforms (ike + * ARM) that don't like unaligned loads and stores + */ + +static inline uint32_t fdt32_ld(const fdt32_t *p) +{ + const uint8_t *bp = (const uint8_t *)p; + + return ((uint32_t)bp[0] << 24) + | ((uint32_t)bp[1] << 16) + | ((uint32_t)bp[2] << 8) + | bp[3]; +} + +static inline void fdt32_st(void *property, uint32_t value) +{ + uint8_t *bp = (uint8_t *)property; + + bp[0] = value >> 24; + bp[1] = (value >> 16) & 0xff; + bp[2] = (value >> 8) & 0xff; + bp[3] = value & 0xff; +} + +static inline uint64_t fdt64_ld(const fdt64_t *p) +{ + const uint8_t *bp = (const uint8_t *)p; + + return ((uint64_t)bp[0] << 56) + | ((uint64_t)bp[1] << 48) + | ((uint64_t)bp[2] << 40) + | ((uint64_t)bp[3] << 32) + | ((uint64_t)bp[4] << 24) + | ((uint64_t)bp[5] << 16) + | ((uint64_t)bp[6] << 8) + | bp[7]; +} + +static inline void fdt64_st(void *property, uint64_t value) +{ + uint8_t *bp = (uint8_t *)property; + + bp[0] = value >> 56; + bp[1] = (value >> 48) & 0xff; + bp[2] = (value >> 40) & 0xff; + bp[3] = (value >> 32) & 0xff; + bp[4] = (value >> 24) & 0xff; + bp[5] = (value >> 16) & 0xff; + bp[6] = (value >> 8) & 0xff; + bp[7] = value & 0xff; +} + +/**********************************************************************/ +/* Traversal functions */ +/**********************************************************************/ + +int fdt_next_node(const void *fdt, int offset, int *depth); + +/** + * fdt_first_subnode() - get offset of first direct subnode + * + * @fdt: FDT blob + * @offset: Offset of node to check + * @return offset of first subnode, or -FDT_ERR_NOTFOUND if there is none + */ +int fdt_first_subnode(const void *fdt, int offset); + +/** + * fdt_next_subnode() - get offset of next direct subnode + * + * After first calling fdt_first_subnode(), call this function repeatedly to + * get direct subnodes of a parent node. + * + * @fdt: FDT blob + * @offset: Offset of previous subnode + * @return offset of next subnode, or -FDT_ERR_NOTFOUND if there are no more + * subnodes + */ +int fdt_next_subnode(const void *fdt, int offset); + +/** + * fdt_for_each_subnode - iterate over all subnodes of a parent + * + * @node: child node (int, lvalue) + * @fdt: FDT blob (const void *) + * @parent: parent node (int) + * + * This is actually a wrapper around a for loop and would be used like so: + * + * fdt_for_each_subnode(node, fdt, parent) { + * Use node + * ... + * } + * + * if ((node < 0) && (node != -FDT_ERR_NOTFOUND)) { + * Error handling + * } + * + * Note that this is implemented as a macro and @node is used as + * iterator in the loop. The parent variable be constant or even a + * literal. + * + */ +#define fdt_for_each_subnode(node, fdt, parent) \ + for (node = fdt_first_subnode(fdt, parent); \ + node >= 0; \ + node = fdt_next_subnode(fdt, node)) + +/**********************************************************************/ +/* General functions */ +/**********************************************************************/ +#define fdt_get_header(fdt, field) \ + (fdt32_ld(&((const struct fdt_header *)(fdt))->field)) +#define fdt_magic(fdt) (fdt_get_header(fdt, magic)) +#define fdt_totalsize(fdt) (fdt_get_header(fdt, totalsize)) +#define fdt_off_dt_struct(fdt) (fdt_get_header(fdt, off_dt_struct)) +#define fdt_off_dt_strings(fdt) (fdt_get_header(fdt, off_dt_strings)) +#define fdt_off_mem_rsvmap(fdt) (fdt_get_header(fdt, off_mem_rsvmap)) +#define fdt_version(fdt) (fdt_get_header(fdt, version)) +#define fdt_last_comp_version(fdt) (fdt_get_header(fdt, last_comp_version)) +#define fdt_boot_cpuid_phys(fdt) (fdt_get_header(fdt, boot_cpuid_phys)) +#define fdt_size_dt_strings(fdt) (fdt_get_header(fdt, size_dt_strings)) +#define fdt_size_dt_struct(fdt) (fdt_get_header(fdt, size_dt_struct)) + +#define fdt_set_hdr_(name) \ + static inline void fdt_set_##name(void *fdt, uint32_t val) \ + { \ + struct fdt_header *fdth = (struct fdt_header *)fdt; \ + fdth->name = cpu_to_fdt32(val); \ + } +fdt_set_hdr_(magic); +fdt_set_hdr_(totalsize); +fdt_set_hdr_(off_dt_struct); +fdt_set_hdr_(off_dt_strings); +fdt_set_hdr_(off_mem_rsvmap); +fdt_set_hdr_(version); +fdt_set_hdr_(last_comp_version); +fdt_set_hdr_(boot_cpuid_phys); +fdt_set_hdr_(size_dt_strings); +fdt_set_hdr_(size_dt_struct); +#undef fdt_set_hdr_ + +/** + * fdt_header_size - return the size of the tree's header + * @fdt: pointer to a flattened device tree + */ +size_t fdt_header_size(const void *fdt); + +/** + * fdt_header_size_ - internal function which takes a version number + */ +size_t fdt_header_size_(uint32_t version); + +/** + * fdt_check_header - sanity check a device tree header + + * @fdt: pointer to data which might be a flattened device tree + * + * fdt_check_header() checks that the given buffer contains what + * appears to be a flattened device tree, and that the header contains + * valid information (to the extent that can be determined from the + * header alone). + * + * returns: + * 0, if the buffer appears to contain a valid device tree + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_TRUNCATED, standard meanings, as above + */ +int fdt_check_header(const void *fdt); + +/** + * fdt_move - move a device tree around in memory + * @fdt: pointer to the device tree to move + * @buf: pointer to memory where the device is to be moved + * @bufsize: size of the memory space at buf + * + * fdt_move() relocates, if possible, the device tree blob located at + * fdt to the buffer at buf of size bufsize. The buffer may overlap + * with the existing device tree blob at fdt. Therefore, + * fdt_move(fdt, fdt, fdt_totalsize(fdt)) + * should always succeed. + * + * returns: + * 0, on success + * -FDT_ERR_NOSPACE, bufsize is insufficient to contain the device tree + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, standard meanings + */ +int fdt_move(const void *fdt, void *buf, int bufsize); + +/**********************************************************************/ +/* Read-only functions */ +/**********************************************************************/ + +int fdt_check_full(const void *fdt, size_t bufsize); + +/** + * fdt_get_string - retrieve a string from the strings block of a device tree + * @fdt: pointer to the device tree blob + * @stroffset: offset of the string within the strings block (native endian) + * @lenp: optional pointer to return the string's length + * + * fdt_get_string() retrieves a pointer to a single string from the + * strings block of the device tree blob at fdt, and optionally also + * returns the string's length in *lenp. + * + * returns: + * a pointer to the string, on success + * NULL, if stroffset is out of bounds, or doesn't point to a valid string + */ +const char *fdt_get_string(const void *fdt, int stroffset, int *lenp); + +/** + * fdt_string - retrieve a string from the strings block of a device tree + * @fdt: pointer to the device tree blob + * @stroffset: offset of the string within the strings block (native endian) + * + * fdt_string() retrieves a pointer to a single string from the + * strings block of the device tree blob at fdt. + * + * returns: + * a pointer to the string, on success + * NULL, if stroffset is out of bounds, or doesn't point to a valid string + */ +const char *fdt_string(const void *fdt, int stroffset); + +/** + * fdt_find_max_phandle - find and return the highest phandle in a tree + * @fdt: pointer to the device tree blob + * @phandle: return location for the highest phandle value found in the tree + * + * fdt_find_max_phandle() finds the highest phandle value in the given device + * tree. The value returned in @phandle is only valid if the function returns + * success. + * + * returns: + * 0 on success or a negative error code on failure + */ +int fdt_find_max_phandle(const void *fdt, uint32_t *phandle); + +/** + * fdt_get_max_phandle - retrieves the highest phandle in a tree + * @fdt: pointer to the device tree blob + * + * fdt_get_max_phandle retrieves the highest phandle in the given + * device tree. This will ignore badly formatted phandles, or phandles + * with a value of 0 or -1. + * + * This function is deprecated in favour of fdt_find_max_phandle(). + * + * returns: + * the highest phandle on success + * 0, if no phandle was found in the device tree + * -1, if an error occurred + */ +static inline uint32_t fdt_get_max_phandle(const void *fdt) +{ + uint32_t phandle; + int err; + + err = fdt_find_max_phandle(fdt, &phandle); + if (err < 0) + return (uint32_t)-1; + + return phandle; +} + +/** + * fdt_generate_phandle - return a new, unused phandle for a device tree blob + * @fdt: pointer to the device tree blob + * @phandle: return location for the new phandle + * + * Walks the device tree blob and looks for the highest phandle value. On + * success, the new, unused phandle value (one higher than the previously + * highest phandle value in the device tree blob) will be returned in the + * @phandle parameter. + * + * Returns: + * 0 on success or a negative error-code on failure + */ +int fdt_generate_phandle(const void *fdt, uint32_t *phandle); + +/** + * fdt_num_mem_rsv - retrieve the number of memory reserve map entries + * @fdt: pointer to the device tree blob + * + * Returns the number of entries in the device tree blob's memory + * reservation map. This does not include the terminating 0,0 entry + * or any other (0,0) entries reserved for expansion. + * + * returns: + * the number of entries + */ +int fdt_num_mem_rsv(const void *fdt); + +/** + * fdt_get_mem_rsv - retrieve one memory reserve map entry + * @fdt: pointer to the device tree blob + * @address, @size: pointers to 64-bit variables + * + * On success, *address and *size will contain the address and size of + * the n-th reserve map entry from the device tree blob, in + * native-endian format. + * + * returns: + * 0, on success + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, standard meanings + */ +int fdt_get_mem_rsv(const void *fdt, int n, uint64_t *address, uint64_t *size); + +/** + * fdt_subnode_offset_namelen - find a subnode based on substring + * @fdt: pointer to the device tree blob + * @parentoffset: structure block offset of a node + * @name: name of the subnode to locate + * @namelen: number of characters of name to consider + * + * Identical to fdt_subnode_offset(), but only examine the first + * namelen characters of name for matching the subnode name. This is + * useful for finding subnodes based on a portion of a larger string, + * such as a full path. + */ +#ifndef SWIG /* Not available in Python */ +int fdt_subnode_offset_namelen(const void *fdt, int parentoffset, + const char *name, int namelen); +#endif +/** + * fdt_subnode_offset - find a subnode of a given node + * @fdt: pointer to the device tree blob + * @parentoffset: structure block offset of a node + * @name: name of the subnode to locate + * + * fdt_subnode_offset() finds a subnode of the node at structure block + * offset parentoffset with the given name. name may include a unit + * address, in which case fdt_subnode_offset() will find the subnode + * with that unit address, or the unit address may be omitted, in + * which case fdt_subnode_offset() will find an arbitrary subnode + * whose name excluding unit address matches the given name. + * + * returns: + * structure block offset of the requested subnode (>=0), on success + * -FDT_ERR_NOTFOUND, if the requested subnode does not exist + * -FDT_ERR_BADOFFSET, if parentoffset did not point to an FDT_BEGIN_NODE + * tag + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_BADSTRUCTURE, + * -FDT_ERR_TRUNCATED, standard meanings. + */ +int fdt_subnode_offset(const void *fdt, int parentoffset, const char *name); + +/** + * fdt_path_offset_namelen - find a tree node by its full path + * @fdt: pointer to the device tree blob + * @path: full path of the node to locate + * @namelen: number of characters of path to consider + * + * Identical to fdt_path_offset(), but only consider the first namelen + * characters of path as the path name. + */ +#ifndef SWIG /* Not available in Python */ +int fdt_path_offset_namelen(const void *fdt, const char *path, int namelen); +#endif + +/** + * fdt_path_offset - find a tree node by its full path + * @fdt: pointer to the device tree blob + * @path: full path of the node to locate + * + * fdt_path_offset() finds a node of a given path in the device tree. + * Each path component may omit the unit address portion, but the + * results of this are undefined if any such path component is + * ambiguous (that is if there are multiple nodes at the relevant + * level matching the given component, differentiated only by unit + * address). + * + * returns: + * structure block offset of the node with the requested path (>=0), on + * success + * -FDT_ERR_BADPATH, given path does not begin with '/' or is invalid + * -FDT_ERR_NOTFOUND, if the requested node does not exist + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_BADSTRUCTURE, + * -FDT_ERR_TRUNCATED, standard meanings. + */ +int fdt_path_offset(const void *fdt, const char *path); + +/** + * fdt_get_name - retrieve the name of a given node + * @fdt: pointer to the device tree blob + * @nodeoffset: structure block offset of the starting node + * @lenp: pointer to an integer variable (will be overwritten) or NULL + * + * fdt_get_name() retrieves the name (including unit address) of the + * device tree node at structure block offset nodeoffset. If lenp is + * non-NULL, the length of this name is also returned, in the integer + * pointed to by lenp. + * + * returns: + * pointer to the node's name, on success + * If lenp is non-NULL, *lenp contains the length of that name + * (>=0) + * NULL, on error + * if lenp is non-NULL *lenp contains an error code (<0): + * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE + * tag + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, standard meanings + */ +const char *fdt_get_name(const void *fdt, int nodeoffset, int *lenp); + +/** + * fdt_first_property_offset - find the offset of a node's first property + * @fdt: pointer to the device tree blob + * @nodeoffset: structure block offset of a node + * + * fdt_first_property_offset() finds the first property of the node at + * the given structure block offset. + * + * returns: + * structure block offset of the property (>=0), on success + * -FDT_ERR_NOTFOUND, if the requested node has no properties + * -FDT_ERR_BADOFFSET, if nodeoffset did not point to an FDT_BEGIN_NODE tag + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_BADSTRUCTURE, + * -FDT_ERR_TRUNCATED, standard meanings. + */ +int fdt_first_property_offset(const void *fdt, int nodeoffset); + +/** + * fdt_next_property_offset - step through a node's properties + * @fdt: pointer to the device tree blob + * @offset: structure block offset of a property + * + * fdt_next_property_offset() finds the property immediately after the + * one at the given structure block offset. This will be a property + * of the same node as the given property. + * + * returns: + * structure block offset of the next property (>=0), on success + * -FDT_ERR_NOTFOUND, if the given property is the last in its node + * -FDT_ERR_BADOFFSET, if nodeoffset did not point to an FDT_PROP tag + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_BADSTRUCTURE, + * -FDT_ERR_TRUNCATED, standard meanings. + */ +int fdt_next_property_offset(const void *fdt, int offset); + +/** + * fdt_for_each_property_offset - iterate over all properties of a node + * + * @property_offset: property offset (int, lvalue) + * @fdt: FDT blob (const void *) + * @node: node offset (int) + * + * This is actually a wrapper around a for loop and would be used like so: + * + * fdt_for_each_property_offset(property, fdt, node) { + * Use property + * ... + * } + * + * if ((property < 0) && (property != -FDT_ERR_NOTFOUND)) { + * Error handling + * } + * + * Note that this is implemented as a macro and property is used as + * iterator in the loop. The node variable can be constant or even a + * literal. + */ +#define fdt_for_each_property_offset(property, fdt, node) \ + for (property = fdt_first_property_offset(fdt, node); \ + property >= 0; \ + property = fdt_next_property_offset(fdt, property)) + +/** + * fdt_get_property_by_offset - retrieve the property at a given offset + * @fdt: pointer to the device tree blob + * @offset: offset of the property to retrieve + * @lenp: pointer to an integer variable (will be overwritten) or NULL + * + * fdt_get_property_by_offset() retrieves a pointer to the + * fdt_property structure within the device tree blob at the given + * offset. If lenp is non-NULL, the length of the property value is + * also returned, in the integer pointed to by lenp. + * + * Note that this code only works on device tree versions >= 16. fdt_getprop() + * works on all versions. + * + * returns: + * pointer to the structure representing the property + * if lenp is non-NULL, *lenp contains the length of the property + * value (>=0) + * NULL, on error + * if lenp is non-NULL, *lenp contains an error code (<0): + * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_PROP tag + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_BADSTRUCTURE, + * -FDT_ERR_TRUNCATED, standard meanings + */ +const struct fdt_property *fdt_get_property_by_offset(const void *fdt, + int offset, + int *lenp); + +/** + * fdt_get_property_namelen - find a property based on substring + * @fdt: pointer to the device tree blob + * @nodeoffset: offset of the node whose property to find + * @name: name of the property to find + * @namelen: number of characters of name to consider + * @lenp: pointer to an integer variable (will be overwritten) or NULL + * + * Identical to fdt_get_property(), but only examine the first namelen + * characters of name for matching the property name. + */ +#ifndef SWIG /* Not available in Python */ +const struct fdt_property *fdt_get_property_namelen(const void *fdt, + int nodeoffset, + const char *name, + int namelen, int *lenp); +#endif + +/** + * fdt_get_property - find a given property in a given node + * @fdt: pointer to the device tree blob + * @nodeoffset: offset of the node whose property to find + * @name: name of the property to find + * @lenp: pointer to an integer variable (will be overwritten) or NULL + * + * fdt_get_property() retrieves a pointer to the fdt_property + * structure within the device tree blob corresponding to the property + * named 'name' of the node at offset nodeoffset. If lenp is + * non-NULL, the length of the property value is also returned, in the + * integer pointed to by lenp. + * + * returns: + * pointer to the structure representing the property + * if lenp is non-NULL, *lenp contains the length of the property + * value (>=0) + * NULL, on error + * if lenp is non-NULL, *lenp contains an error code (<0): + * -FDT_ERR_NOTFOUND, node does not have named property + * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE + * tag + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_BADSTRUCTURE, + * -FDT_ERR_TRUNCATED, standard meanings + */ +const struct fdt_property *fdt_get_property(const void *fdt, int nodeoffset, + const char *name, int *lenp); +static inline struct fdt_property *fdt_get_property_w(void *fdt, int nodeoffset, + const char *name, + int *lenp) +{ + return (struct fdt_property *)(uintptr_t) + fdt_get_property(fdt, nodeoffset, name, lenp); +} + +/** + * fdt_getprop_by_offset - retrieve the value of a property at a given offset + * @fdt: pointer to the device tree blob + * @offset: offset of the property to read + * @namep: pointer to a string variable (will be overwritten) or NULL + * @lenp: pointer to an integer variable (will be overwritten) or NULL + * + * fdt_getprop_by_offset() retrieves a pointer to the value of the + * property at structure block offset 'offset' (this will be a pointer + * to within the device blob itself, not a copy of the value). If + * lenp is non-NULL, the length of the property value is also + * returned, in the integer pointed to by lenp. If namep is non-NULL, + * the property's namne will also be returned in the char * pointed to + * by namep (this will be a pointer to within the device tree's string + * block, not a new copy of the name). + * + * returns: + * pointer to the property's value + * if lenp is non-NULL, *lenp contains the length of the property + * value (>=0) + * if namep is non-NULL *namep contiains a pointer to the property + * name. + * NULL, on error + * if lenp is non-NULL, *lenp contains an error code (<0): + * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_PROP tag + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_BADSTRUCTURE, + * -FDT_ERR_TRUNCATED, standard meanings + */ +#ifndef SWIG /* This function is not useful in Python */ +const void *fdt_getprop_by_offset(const void *fdt, int offset, + const char **namep, int *lenp); +#endif + +/** + * fdt_getprop_namelen - get property value based on substring + * @fdt: pointer to the device tree blob + * @nodeoffset: offset of the node whose property to find + * @name: name of the property to find + * @namelen: number of characters of name to consider + * @lenp: pointer to an integer variable (will be overwritten) or NULL + * + * Identical to fdt_getprop(), but only examine the first namelen + * characters of name for matching the property name. + */ +#ifndef SWIG /* Not available in Python */ +const void *fdt_getprop_namelen(const void *fdt, int nodeoffset, + const char *name, int namelen, int *lenp); +static inline void *fdt_getprop_namelen_w(void *fdt, int nodeoffset, + const char *name, int namelen, + int *lenp) +{ + return (void *)(uintptr_t)fdt_getprop_namelen(fdt, nodeoffset, name, + namelen, lenp); +} +#endif + +/** + * fdt_getprop - retrieve the value of a given property + * @fdt: pointer to the device tree blob + * @nodeoffset: offset of the node whose property to find + * @name: name of the property to find + * @lenp: pointer to an integer variable (will be overwritten) or NULL + * + * fdt_getprop() retrieves a pointer to the value of the property + * named 'name' of the node at offset nodeoffset (this will be a + * pointer to within the device blob itself, not a copy of the value). + * If lenp is non-NULL, the length of the property value is also + * returned, in the integer pointed to by lenp. + * + * returns: + * pointer to the property's value + * if lenp is non-NULL, *lenp contains the length of the property + * value (>=0) + * NULL, on error + * if lenp is non-NULL, *lenp contains an error code (<0): + * -FDT_ERR_NOTFOUND, node does not have named property + * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE + * tag + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_BADSTRUCTURE, + * -FDT_ERR_TRUNCATED, standard meanings + */ +const void *fdt_getprop(const void *fdt, int nodeoffset, + const char *name, int *lenp); +static inline void *fdt_getprop_w(void *fdt, int nodeoffset, + const char *name, int *lenp) +{ + return (void *)(uintptr_t)fdt_getprop(fdt, nodeoffset, name, lenp); +} + +/** + * fdt_get_phandle - retrieve the phandle of a given node + * @fdt: pointer to the device tree blob + * @nodeoffset: structure block offset of the node + * + * fdt_get_phandle() retrieves the phandle of the device tree node at + * structure block offset nodeoffset. + * + * returns: + * the phandle of the node at nodeoffset, on success (!= 0, != -1) + * 0, if the node has no phandle, or another error occurs + */ +uint32_t fdt_get_phandle(const void *fdt, int nodeoffset); + +/** + * fdt_get_alias_namelen - get alias based on substring + * @fdt: pointer to the device tree blob + * @name: name of the alias th look up + * @namelen: number of characters of name to consider + * + * Identical to fdt_get_alias(), but only examine the first namelen + * characters of name for matching the alias name. + */ +#ifndef SWIG /* Not available in Python */ +const char *fdt_get_alias_namelen(const void *fdt, + const char *name, int namelen); +#endif + +/** + * fdt_get_alias - retrieve the path referenced by a given alias + * @fdt: pointer to the device tree blob + * @name: name of the alias th look up + * + * fdt_get_alias() retrieves the value of a given alias. That is, the + * value of the property named 'name' in the node /aliases. + * + * returns: + * a pointer to the expansion of the alias named 'name', if it exists + * NULL, if the given alias or the /aliases node does not exist + */ +const char *fdt_get_alias(const void *fdt, const char *name); + +/** + * fdt_get_path - determine the full path of a node + * @fdt: pointer to the device tree blob + * @nodeoffset: offset of the node whose path to find + * @buf: character buffer to contain the returned path (will be overwritten) + * @buflen: size of the character buffer at buf + * + * fdt_get_path() computes the full path of the node at offset + * nodeoffset, and records that path in the buffer at buf. + * + * NOTE: This function is expensive, as it must scan the device tree + * structure from the start to nodeoffset. + * + * returns: + * 0, on success + * buf contains the absolute path of the node at + * nodeoffset, as a NUL-terminated string. + * -FDT_ERR_BADOFFSET, nodeoffset does not refer to a BEGIN_NODE tag + * -FDT_ERR_NOSPACE, the path of the given node is longer than (bufsize-1) + * characters and will not fit in the given buffer. + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_BADSTRUCTURE, standard meanings + */ +int fdt_get_path(const void *fdt, int nodeoffset, char *buf, int buflen); + +/** + * fdt_supernode_atdepth_offset - find a specific ancestor of a node + * @fdt: pointer to the device tree blob + * @nodeoffset: offset of the node whose parent to find + * @supernodedepth: depth of the ancestor to find + * @nodedepth: pointer to an integer variable (will be overwritten) or NULL + * + * fdt_supernode_atdepth_offset() finds an ancestor of the given node + * at a specific depth from the root (where the root itself has depth + * 0, its immediate subnodes depth 1 and so forth). So + * fdt_supernode_atdepth_offset(fdt, nodeoffset, 0, NULL); + * will always return 0, the offset of the root node. If the node at + * nodeoffset has depth D, then: + * fdt_supernode_atdepth_offset(fdt, nodeoffset, D, NULL); + * will return nodeoffset itself. + * + * NOTE: This function is expensive, as it must scan the device tree + * structure from the start to nodeoffset. + * + * returns: + * structure block offset of the node at node offset's ancestor + * of depth supernodedepth (>=0), on success + * -FDT_ERR_BADOFFSET, nodeoffset does not refer to a BEGIN_NODE tag + * -FDT_ERR_NOTFOUND, supernodedepth was greater than the depth of + * nodeoffset + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_BADSTRUCTURE, standard meanings + */ +int fdt_supernode_atdepth_offset(const void *fdt, int nodeoffset, + int supernodedepth, int *nodedepth); + +/** + * fdt_node_depth - find the depth of a given node + * @fdt: pointer to the device tree blob + * @nodeoffset: offset of the node whose parent to find + * + * fdt_node_depth() finds the depth of a given node. The root node + * has depth 0, its immediate subnodes depth 1 and so forth. + * + * NOTE: This function is expensive, as it must scan the device tree + * structure from the start to nodeoffset. + * + * returns: + * depth of the node at nodeoffset (>=0), on success + * -FDT_ERR_BADOFFSET, nodeoffset does not refer to a BEGIN_NODE tag + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_BADSTRUCTURE, standard meanings + */ +int fdt_node_depth(const void *fdt, int nodeoffset); + +/** + * fdt_parent_offset - find the parent of a given node + * @fdt: pointer to the device tree blob + * @nodeoffset: offset of the node whose parent to find + * + * fdt_parent_offset() locates the parent node of a given node (that + * is, it finds the offset of the node which contains the node at + * nodeoffset as a subnode). + * + * NOTE: This function is expensive, as it must scan the device tree + * structure from the start to nodeoffset, *twice*. + * + * returns: + * structure block offset of the parent of the node at nodeoffset + * (>=0), on success + * -FDT_ERR_BADOFFSET, nodeoffset does not refer to a BEGIN_NODE tag + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_BADSTRUCTURE, standard meanings + */ +int fdt_parent_offset(const void *fdt, int nodeoffset); + +/** + * fdt_node_offset_by_prop_value - find nodes with a given property value + * @fdt: pointer to the device tree blob + * @startoffset: only find nodes after this offset + * @propname: property name to check + * @propval: property value to search for + * @proplen: length of the value in propval + * + * fdt_node_offset_by_prop_value() returns the offset of the first + * node after startoffset, which has a property named propname whose + * value is of length proplen and has value equal to propval; or if + * startoffset is -1, the very first such node in the tree. + * + * To iterate through all nodes matching the criterion, the following + * idiom can be used: + * offset = fdt_node_offset_by_prop_value(fdt, -1, propname, + * propval, proplen); + * while (offset != -FDT_ERR_NOTFOUND) { + * // other code here + * offset = fdt_node_offset_by_prop_value(fdt, offset, propname, + * propval, proplen); + * } + * + * Note the -1 in the first call to the function, if 0 is used here + * instead, the function will never locate the root node, even if it + * matches the criterion. + * + * returns: + * structure block offset of the located node (>= 0, >startoffset), + * on success + * -FDT_ERR_NOTFOUND, no node matching the criterion exists in the + * tree after startoffset + * -FDT_ERR_BADOFFSET, nodeoffset does not refer to a BEGIN_NODE tag + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_BADSTRUCTURE, standard meanings + */ +int fdt_node_offset_by_prop_value(const void *fdt, int startoffset, + const char *propname, + const void *propval, int proplen); + +/** + * fdt_node_offset_by_phandle - find the node with a given phandle + * @fdt: pointer to the device tree blob + * @phandle: phandle value + * + * fdt_node_offset_by_phandle() returns the offset of the node + * which has the given phandle value. If there is more than one node + * in the tree with the given phandle (an invalid tree), results are + * undefined. + * + * returns: + * structure block offset of the located node (>= 0), on success + * -FDT_ERR_NOTFOUND, no node with that phandle exists + * -FDT_ERR_BADPHANDLE, given phandle value was invalid (0 or -1) + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_BADSTRUCTURE, standard meanings + */ +int fdt_node_offset_by_phandle(const void *fdt, uint32_t phandle); + +/** + * fdt_node_check_compatible: check a node's compatible property + * @fdt: pointer to the device tree blob + * @nodeoffset: offset of a tree node + * @compatible: string to match against + * + * + * fdt_node_check_compatible() returns 0 if the given node contains a + * 'compatible' property with the given string as one of its elements, + * it returns non-zero otherwise, or on error. + * + * returns: + * 0, if the node has a 'compatible' property listing the given string + * 1, if the node has a 'compatible' property, but it does not list + * the given string + * -FDT_ERR_NOTFOUND, if the given node has no 'compatible' property + * -FDT_ERR_BADOFFSET, if nodeoffset does not refer to a BEGIN_NODE tag + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_BADSTRUCTURE, standard meanings + */ +int fdt_node_check_compatible(const void *fdt, int nodeoffset, + const char *compatible); + +/** + * fdt_node_offset_by_compatible - find nodes with a given 'compatible' value + * @fdt: pointer to the device tree blob + * @startoffset: only find nodes after this offset + * @compatible: 'compatible' string to match against + * + * fdt_node_offset_by_compatible() returns the offset of the first + * node after startoffset, which has a 'compatible' property which + * lists the given compatible string; or if startoffset is -1, the + * very first such node in the tree. + * + * To iterate through all nodes matching the criterion, the following + * idiom can be used: + * offset = fdt_node_offset_by_compatible(fdt, -1, compatible); + * while (offset != -FDT_ERR_NOTFOUND) { + * // other code here + * offset = fdt_node_offset_by_compatible(fdt, offset, compatible); + * } + * + * Note the -1 in the first call to the function, if 0 is used here + * instead, the function will never locate the root node, even if it + * matches the criterion. + * + * returns: + * structure block offset of the located node (>= 0, >startoffset), + * on success + * -FDT_ERR_NOTFOUND, no node matching the criterion exists in the + * tree after startoffset + * -FDT_ERR_BADOFFSET, nodeoffset does not refer to a BEGIN_NODE tag + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_BADSTRUCTURE, standard meanings + */ +int fdt_node_offset_by_compatible(const void *fdt, int startoffset, + const char *compatible); + +/** + * fdt_stringlist_contains - check a string list property for a string + * @strlist: Property containing a list of strings to check + * @listlen: Length of property + * @str: String to search for + * + * This is a utility function provided for convenience. The list contains + * one or more strings, each terminated by \0, as is found in a device tree + * "compatible" property. + * + * @return: 1 if the string is found in the list, 0 not found, or invalid list + */ +int fdt_stringlist_contains(const char *strlist, int listlen, const char *str); + +/** + * fdt_stringlist_count - count the number of strings in a string list + * @fdt: pointer to the device tree blob + * @nodeoffset: offset of a tree node + * @property: name of the property containing the string list + * @return: + * the number of strings in the given property + * -FDT_ERR_BADVALUE if the property value is not NUL-terminated + * -FDT_ERR_NOTFOUND if the property does not exist + */ +int fdt_stringlist_count(const void *fdt, int nodeoffset, const char *property); + +/** + * fdt_stringlist_search - find a string in a string list and return its index + * @fdt: pointer to the device tree blob + * @nodeoffset: offset of a tree node + * @property: name of the property containing the string list + * @string: string to look up in the string list + * + * Note that it is possible for this function to succeed on property values + * that are not NUL-terminated. That's because the function will stop after + * finding the first occurrence of @string. This can for example happen with + * small-valued cell properties, such as #address-cells, when searching for + * the empty string. + * + * @return: + * the index of the string in the list of strings + * -FDT_ERR_BADVALUE if the property value is not NUL-terminated + * -FDT_ERR_NOTFOUND if the property does not exist or does not contain + * the given string + */ +int fdt_stringlist_search(const void *fdt, int nodeoffset, const char *property, + const char *string); + +/** + * fdt_stringlist_get() - obtain the string at a given index in a string list + * @fdt: pointer to the device tree blob + * @nodeoffset: offset of a tree node + * @property: name of the property containing the string list + * @index: index of the string to return + * @lenp: return location for the string length or an error code on failure + * + * Note that this will successfully extract strings from properties with + * non-NUL-terminated values. For example on small-valued cell properties + * this function will return the empty string. + * + * If non-NULL, the length of the string (on success) or a negative error-code + * (on failure) will be stored in the integer pointer to by lenp. + * + * @return: + * A pointer to the string at the given index in the string list or NULL on + * failure. On success the length of the string will be stored in the memory + * location pointed to by the lenp parameter, if non-NULL. On failure one of + * the following negative error codes will be returned in the lenp parameter + * (if non-NULL): + * -FDT_ERR_BADVALUE if the property value is not NUL-terminated + * -FDT_ERR_NOTFOUND if the property does not exist + */ +const char *fdt_stringlist_get(const void *fdt, int nodeoffset, + const char *property, int index, + int *lenp); + +/**********************************************************************/ +/* Read-only functions (addressing related) */ +/**********************************************************************/ + +/** + * FDT_MAX_NCELLS - maximum value for #address-cells and #size-cells + * + * This is the maximum value for #address-cells, #size-cells and + * similar properties that will be processed by libfdt. IEE1275 + * requires that OF implementations handle values up to 4. + * Implementations may support larger values, but in practice higher + * values aren't used. + */ +#define FDT_MAX_NCELLS 4 + +/** + * fdt_address_cells - retrieve address size for a bus represented in the tree + * @fdt: pointer to the device tree blob + * @nodeoffset: offset of the node to find the address size for + * + * When the node has a valid #address-cells property, returns its value. + * + * returns: + * 0 <= n < FDT_MAX_NCELLS, on success + * 2, if the node has no #address-cells property + * -FDT_ERR_BADNCELLS, if the node has a badly formatted or invalid + * #address-cells property + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_BADSTRUCTURE, + * -FDT_ERR_TRUNCATED, standard meanings + */ +int fdt_address_cells(const void *fdt, int nodeoffset); + +/** + * fdt_size_cells - retrieve address range size for a bus represented in the + * tree + * @fdt: pointer to the device tree blob + * @nodeoffset: offset of the node to find the address range size for + * + * When the node has a valid #size-cells property, returns its value. + * + * returns: + * 0 <= n < FDT_MAX_NCELLS, on success + * 1, if the node has no #size-cells property + * -FDT_ERR_BADNCELLS, if the node has a badly formatted or invalid + * #size-cells property + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_BADSTRUCTURE, + * -FDT_ERR_TRUNCATED, standard meanings + */ +int fdt_size_cells(const void *fdt, int nodeoffset); + + +/**********************************************************************/ +/* Write-in-place functions */ +/**********************************************************************/ + +/** + * fdt_setprop_inplace_namelen_partial - change a property's value, + * but not its size + * @fdt: pointer to the device tree blob + * @nodeoffset: offset of the node whose property to change + * @name: name of the property to change + * @namelen: number of characters of name to consider + * @idx: index of the property to change in the array + * @val: pointer to data to replace the property value with + * @len: length of the property value + * + * Identical to fdt_setprop_inplace(), but modifies the given property + * starting from the given index, and using only the first characters + * of the name. It is useful when you want to manipulate only one value of + * an array and you have a string that doesn't end with \0. + */ +#ifndef SWIG /* Not available in Python */ +int fdt_setprop_inplace_namelen_partial(void *fdt, int nodeoffset, + const char *name, int namelen, + uint32_t idx, const void *val, + int len); +#endif + +/** + * fdt_setprop_inplace - change a property's value, but not its size + * @fdt: pointer to the device tree blob + * @nodeoffset: offset of the node whose property to change + * @name: name of the property to change + * @val: pointer to data to replace the property value with + * @len: length of the property value + * + * fdt_setprop_inplace() replaces the value of a given property with + * the data in val, of length len. This function cannot change the + * size of a property, and so will only work if len is equal to the + * current length of the property. + * + * This function will alter only the bytes in the blob which contain + * the given property value, and will not alter or move any other part + * of the tree. + * + * returns: + * 0, on success + * -FDT_ERR_NOSPACE, if len is not equal to the property's current length + * -FDT_ERR_NOTFOUND, node does not have the named property + * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_BADSTRUCTURE, + * -FDT_ERR_TRUNCATED, standard meanings + */ +#ifndef SWIG /* Not available in Python */ +int fdt_setprop_inplace(void *fdt, int nodeoffset, const char *name, + const void *val, int len); +#endif + +/** + * fdt_setprop_inplace_u32 - change the value of a 32-bit integer property + * @fdt: pointer to the device tree blob + * @nodeoffset: offset of the node whose property to change + * @name: name of the property to change + * @val: 32-bit integer value to replace the property with + * + * fdt_setprop_inplace_u32() replaces the value of a given property + * with the 32-bit integer value in val, converting val to big-endian + * if necessary. This function cannot change the size of a property, + * and so will only work if the property already exists and has length + * 4. + * + * This function will alter only the bytes in the blob which contain + * the given property value, and will not alter or move any other part + * of the tree. + * + * returns: + * 0, on success + * -FDT_ERR_NOSPACE, if the property's length is not equal to 4 + * -FDT_ERR_NOTFOUND, node does not have the named property + * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_BADSTRUCTURE, + * -FDT_ERR_TRUNCATED, standard meanings + */ +static inline int fdt_setprop_inplace_u32(void *fdt, int nodeoffset, + const char *name, uint32_t val) +{ + fdt32_t tmp = cpu_to_fdt32(val); + return fdt_setprop_inplace(fdt, nodeoffset, name, &tmp, sizeof(tmp)); +} + +/** + * fdt_setprop_inplace_u64 - change the value of a 64-bit integer property + * @fdt: pointer to the device tree blob + * @nodeoffset: offset of the node whose property to change + * @name: name of the property to change + * @val: 64-bit integer value to replace the property with + * + * fdt_setprop_inplace_u64() replaces the value of a given property + * with the 64-bit integer value in val, converting val to big-endian + * if necessary. This function cannot change the size of a property, + * and so will only work if the property already exists and has length + * 8. + * + * This function will alter only the bytes in the blob which contain + * the given property value, and will not alter or move any other part + * of the tree. + * + * returns: + * 0, on success + * -FDT_ERR_NOSPACE, if the property's length is not equal to 8 + * -FDT_ERR_NOTFOUND, node does not have the named property + * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_BADSTRUCTURE, + * -FDT_ERR_TRUNCATED, standard meanings + */ +static inline int fdt_setprop_inplace_u64(void *fdt, int nodeoffset, + const char *name, uint64_t val) +{ + fdt64_t tmp = cpu_to_fdt64(val); + return fdt_setprop_inplace(fdt, nodeoffset, name, &tmp, sizeof(tmp)); +} + +/** + * fdt_setprop_inplace_cell - change the value of a single-cell property + * + * This is an alternative name for fdt_setprop_inplace_u32() + */ +static inline int fdt_setprop_inplace_cell(void *fdt, int nodeoffset, + const char *name, uint32_t val) +{ + return fdt_setprop_inplace_u32(fdt, nodeoffset, name, val); +} + +/** + * fdt_nop_property - replace a property with nop tags + * @fdt: pointer to the device tree blob + * @nodeoffset: offset of the node whose property to nop + * @name: name of the property to nop + * + * fdt_nop_property() will replace a given property's representation + * in the blob with FDT_NOP tags, effectively removing it from the + * tree. + * + * This function will alter only the bytes in the blob which contain + * the property, and will not alter or move any other part of the + * tree. + * + * returns: + * 0, on success + * -FDT_ERR_NOTFOUND, node does not have the named property + * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_BADSTRUCTURE, + * -FDT_ERR_TRUNCATED, standard meanings + */ +int fdt_nop_property(void *fdt, int nodeoffset, const char *name); + +/** + * fdt_nop_node - replace a node (subtree) with nop tags + * @fdt: pointer to the device tree blob + * @nodeoffset: offset of the node to nop + * + * fdt_nop_node() will replace a given node's representation in the + * blob, including all its subnodes, if any, with FDT_NOP tags, + * effectively removing it from the tree. + * + * This function will alter only the bytes in the blob which contain + * the node and its properties and subnodes, and will not alter or + * move any other part of the tree. + * + * returns: + * 0, on success + * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_BADSTRUCTURE, + * -FDT_ERR_TRUNCATED, standard meanings + */ +int fdt_nop_node(void *fdt, int nodeoffset); + +/**********************************************************************/ +/* Sequential write functions */ +/**********************************************************************/ + +/* fdt_create_with_flags flags */ +#define FDT_CREATE_FLAG_NO_NAME_DEDUP 0x1 + /* FDT_CREATE_FLAG_NO_NAME_DEDUP: Do not try to de-duplicate property + * names in the fdt. This can result in faster creation times, but + * a larger fdt. */ + +#define FDT_CREATE_FLAGS_ALL (FDT_CREATE_FLAG_NO_NAME_DEDUP) + +/** + * fdt_create_with_flags - begin creation of a new fdt + * @fdt: pointer to memory allocated where fdt will be created + * @bufsize: size of the memory space at fdt + * @flags: a valid combination of FDT_CREATE_FLAG_ flags, or 0. + * + * fdt_create_with_flags() begins the process of creating a new fdt with + * the sequential write interface. + * + * fdt creation process must end with fdt_finished() to produce a valid fdt. + * + * returns: + * 0, on success + * -FDT_ERR_NOSPACE, bufsize is insufficient for a minimal fdt + * -FDT_ERR_BADFLAGS, flags is not valid + */ +int fdt_create_with_flags(void *buf, int bufsize, uint32_t flags); + +/** + * fdt_create - begin creation of a new fdt + * @fdt: pointer to memory allocated where fdt will be created + * @bufsize: size of the memory space at fdt + * + * fdt_create() is equivalent to fdt_create_with_flags() with flags=0. + * + * returns: + * 0, on success + * -FDT_ERR_NOSPACE, bufsize is insufficient for a minimal fdt + */ +int fdt_create(void *buf, int bufsize); + +int fdt_resize(void *fdt, void *buf, int bufsize); +int fdt_add_reservemap_entry(void *fdt, uint64_t addr, uint64_t size); +int fdt_finish_reservemap(void *fdt); +int fdt_begin_node(void *fdt, const char *name); +int fdt_property(void *fdt, const char *name, const void *val, int len); +static inline int fdt_property_u32(void *fdt, const char *name, uint32_t val) +{ + fdt32_t tmp = cpu_to_fdt32(val); + return fdt_property(fdt, name, &tmp, sizeof(tmp)); +} +static inline int fdt_property_u64(void *fdt, const char *name, uint64_t val) +{ + fdt64_t tmp = cpu_to_fdt64(val); + return fdt_property(fdt, name, &tmp, sizeof(tmp)); +} + +#ifndef SWIG /* Not available in Python */ +static inline int fdt_property_cell(void *fdt, const char *name, uint32_t val) +{ + return fdt_property_u32(fdt, name, val); +} +#endif + +/** + * fdt_property_placeholder - add a new property and return a ptr to its value + * + * @fdt: pointer to the device tree blob + * @name: name of property to add + * @len: length of property value in bytes + * @valp: returns a pointer to where where the value should be placed + * + * returns: + * 0, on success + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_NOSPACE, standard meanings + */ +int fdt_property_placeholder(void *fdt, const char *name, int len, void **valp); + +#define fdt_property_string(fdt, name, str) \ + fdt_property(fdt, name, str, strlen(str)+1) +int fdt_end_node(void *fdt); +int fdt_finish(void *fdt); + +/**********************************************************************/ +/* Read-write functions */ +/**********************************************************************/ + +int fdt_create_empty_tree(void *buf, int bufsize); +int fdt_open_into(const void *fdt, void *buf, int bufsize); +int fdt_pack(void *fdt); + +/** + * fdt_add_mem_rsv - add one memory reserve map entry + * @fdt: pointer to the device tree blob + * @address, @size: 64-bit values (native endian) + * + * Adds a reserve map entry to the given blob reserving a region at + * address address of length size. + * + * This function will insert data into the reserve map and will + * therefore change the indexes of some entries in the table. + * + * returns: + * 0, on success + * -FDT_ERR_NOSPACE, there is insufficient free space in the blob to + * contain the new reservation entry + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_BADSTRUCTURE, + * -FDT_ERR_BADLAYOUT, + * -FDT_ERR_TRUNCATED, standard meanings + */ +int fdt_add_mem_rsv(void *fdt, uint64_t address, uint64_t size); + +/** + * fdt_del_mem_rsv - remove a memory reserve map entry + * @fdt: pointer to the device tree blob + * @n: entry to remove + * + * fdt_del_mem_rsv() removes the n-th memory reserve map entry from + * the blob. + * + * This function will delete data from the reservation table and will + * therefore change the indexes of some entries in the table. + * + * returns: + * 0, on success + * -FDT_ERR_NOTFOUND, there is no entry of the given index (i.e. there + * are less than n+1 reserve map entries) + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_BADSTRUCTURE, + * -FDT_ERR_BADLAYOUT, + * -FDT_ERR_TRUNCATED, standard meanings + */ +int fdt_del_mem_rsv(void *fdt, int n); + +/** + * fdt_set_name - change the name of a given node + * @fdt: pointer to the device tree blob + * @nodeoffset: structure block offset of a node + * @name: name to give the node + * + * fdt_set_name() replaces the name (including unit address, if any) + * of the given node with the given string. NOTE: this function can't + * efficiently check if the new name is unique amongst the given + * node's siblings; results are undefined if this function is invoked + * with a name equal to one of the given node's siblings. + * + * This function may insert or delete data from the blob, and will + * therefore change the offsets of some existing nodes. + * + * returns: + * 0, on success + * -FDT_ERR_NOSPACE, there is insufficient free space in the blob + * to contain the new name + * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, standard meanings + */ +int fdt_set_name(void *fdt, int nodeoffset, const char *name); + +/** + * fdt_setprop - create or change a property + * @fdt: pointer to the device tree blob + * @nodeoffset: offset of the node whose property to change + * @name: name of the property to change + * @val: pointer to data to set the property value to + * @len: length of the property value + * + * fdt_setprop() sets the value of the named property in the given + * node to the given value and length, creating the property if it + * does not already exist. + * + * This function may insert or delete data from the blob, and will + * therefore change the offsets of some existing nodes. + * + * returns: + * 0, on success + * -FDT_ERR_NOSPACE, there is insufficient free space in the blob to + * contain the new property value + * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag + * -FDT_ERR_BADLAYOUT, + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_BADSTRUCTURE, + * -FDT_ERR_BADLAYOUT, + * -FDT_ERR_TRUNCATED, standard meanings + */ +int fdt_setprop(void *fdt, int nodeoffset, const char *name, + const void *val, int len); + +/** + * fdt_setprop_placeholder - allocate space for a property + * @fdt: pointer to the device tree blob + * @nodeoffset: offset of the node whose property to change + * @name: name of the property to change + * @len: length of the property value + * @prop_data: return pointer to property data + * + * fdt_setprop_placeholer() allocates the named property in the given node. + * If the property exists it is resized. In either case a pointer to the + * property data is returned. + * + * This function may insert or delete data from the blob, and will + * therefore change the offsets of some existing nodes. + * + * returns: + * 0, on success + * -FDT_ERR_NOSPACE, there is insufficient free space in the blob to + * contain the new property value + * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag + * -FDT_ERR_BADLAYOUT, + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_BADSTRUCTURE, + * -FDT_ERR_BADLAYOUT, + * -FDT_ERR_TRUNCATED, standard meanings + */ +int fdt_setprop_placeholder(void *fdt, int nodeoffset, const char *name, + int len, void **prop_data); + +/** + * fdt_setprop_u32 - set a property to a 32-bit integer + * @fdt: pointer to the device tree blob + * @nodeoffset: offset of the node whose property to change + * @name: name of the property to change + * @val: 32-bit integer value for the property (native endian) + * + * fdt_setprop_u32() sets the value of the named property in the given + * node to the given 32-bit integer value (converting to big-endian if + * necessary), or creates a new property with that value if it does + * not already exist. + * + * This function may insert or delete data from the blob, and will + * therefore change the offsets of some existing nodes. + * + * returns: + * 0, on success + * -FDT_ERR_NOSPACE, there is insufficient free space in the blob to + * contain the new property value + * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag + * -FDT_ERR_BADLAYOUT, + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_BADSTRUCTURE, + * -FDT_ERR_BADLAYOUT, + * -FDT_ERR_TRUNCATED, standard meanings + */ +static inline int fdt_setprop_u32(void *fdt, int nodeoffset, const char *name, + uint32_t val) +{ + fdt32_t tmp = cpu_to_fdt32(val); + return fdt_setprop(fdt, nodeoffset, name, &tmp, sizeof(tmp)); +} + +/** + * fdt_setprop_u64 - set a property to a 64-bit integer + * @fdt: pointer to the device tree blob + * @nodeoffset: offset of the node whose property to change + * @name: name of the property to change + * @val: 64-bit integer value for the property (native endian) + * + * fdt_setprop_u64() sets the value of the named property in the given + * node to the given 64-bit integer value (converting to big-endian if + * necessary), or creates a new property with that value if it does + * not already exist. + * + * This function may insert or delete data from the blob, and will + * therefore change the offsets of some existing nodes. + * + * returns: + * 0, on success + * -FDT_ERR_NOSPACE, there is insufficient free space in the blob to + * contain the new property value + * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag + * -FDT_ERR_BADLAYOUT, + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_BADSTRUCTURE, + * -FDT_ERR_BADLAYOUT, + * -FDT_ERR_TRUNCATED, standard meanings + */ +static inline int fdt_setprop_u64(void *fdt, int nodeoffset, const char *name, + uint64_t val) +{ + fdt64_t tmp = cpu_to_fdt64(val); + return fdt_setprop(fdt, nodeoffset, name, &tmp, sizeof(tmp)); +} + +/** + * fdt_setprop_cell - set a property to a single cell value + * + * This is an alternative name for fdt_setprop_u32() + */ +static inline int fdt_setprop_cell(void *fdt, int nodeoffset, const char *name, + uint32_t val) +{ + return fdt_setprop_u32(fdt, nodeoffset, name, val); +} + +/** + * fdt_setprop_string - set a property to a string value + * @fdt: pointer to the device tree blob + * @nodeoffset: offset of the node whose property to change + * @name: name of the property to change + * @str: string value for the property + * + * fdt_setprop_string() sets the value of the named property in the + * given node to the given string value (using the length of the + * string to determine the new length of the property), or creates a + * new property with that value if it does not already exist. + * + * This function may insert or delete data from the blob, and will + * therefore change the offsets of some existing nodes. + * + * returns: + * 0, on success + * -FDT_ERR_NOSPACE, there is insufficient free space in the blob to + * contain the new property value + * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag + * -FDT_ERR_BADLAYOUT, + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_BADSTRUCTURE, + * -FDT_ERR_BADLAYOUT, + * -FDT_ERR_TRUNCATED, standard meanings + */ +#define fdt_setprop_string(fdt, nodeoffset, name, str) \ + fdt_setprop((fdt), (nodeoffset), (name), (str), strlen(str)+1) + + +/** + * fdt_setprop_empty - set a property to an empty value + * @fdt: pointer to the device tree blob + * @nodeoffset: offset of the node whose property to change + * @name: name of the property to change + * + * fdt_setprop_empty() sets the value of the named property in the + * given node to an empty (zero length) value, or creates a new empty + * property if it does not already exist. + * + * This function may insert or delete data from the blob, and will + * therefore change the offsets of some existing nodes. + * + * returns: + * 0, on success + * -FDT_ERR_NOSPACE, there is insufficient free space in the blob to + * contain the new property value + * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag + * -FDT_ERR_BADLAYOUT, + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_BADSTRUCTURE, + * -FDT_ERR_BADLAYOUT, + * -FDT_ERR_TRUNCATED, standard meanings + */ +#define fdt_setprop_empty(fdt, nodeoffset, name) \ + fdt_setprop((fdt), (nodeoffset), (name), NULL, 0) + +/** + * fdt_appendprop - append to or create a property + * @fdt: pointer to the device tree blob + * @nodeoffset: offset of the node whose property to change + * @name: name of the property to append to + * @val: pointer to data to append to the property value + * @len: length of the data to append to the property value + * + * fdt_appendprop() appends the value to the named property in the + * given node, creating the property if it does not already exist. + * + * This function may insert data into the blob, and will therefore + * change the offsets of some existing nodes. + * + * returns: + * 0, on success + * -FDT_ERR_NOSPACE, there is insufficient free space in the blob to + * contain the new property value + * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag + * -FDT_ERR_BADLAYOUT, + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_BADSTRUCTURE, + * -FDT_ERR_BADLAYOUT, + * -FDT_ERR_TRUNCATED, standard meanings + */ +int fdt_appendprop(void *fdt, int nodeoffset, const char *name, + const void *val, int len); + +/** + * fdt_appendprop_u32 - append a 32-bit integer value to a property + * @fdt: pointer to the device tree blob + * @nodeoffset: offset of the node whose property to change + * @name: name of the property to change + * @val: 32-bit integer value to append to the property (native endian) + * + * fdt_appendprop_u32() appends the given 32-bit integer value + * (converting to big-endian if necessary) to the value of the named + * property in the given node, or creates a new property with that + * value if it does not already exist. + * + * This function may insert data into the blob, and will therefore + * change the offsets of some existing nodes. + * + * returns: + * 0, on success + * -FDT_ERR_NOSPACE, there is insufficient free space in the blob to + * contain the new property value + * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag + * -FDT_ERR_BADLAYOUT, + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_BADSTRUCTURE, + * -FDT_ERR_BADLAYOUT, + * -FDT_ERR_TRUNCATED, standard meanings + */ +static inline int fdt_appendprop_u32(void *fdt, int nodeoffset, + const char *name, uint32_t val) +{ + fdt32_t tmp = cpu_to_fdt32(val); + return fdt_appendprop(fdt, nodeoffset, name, &tmp, sizeof(tmp)); +} + +/** + * fdt_appendprop_u64 - append a 64-bit integer value to a property + * @fdt: pointer to the device tree blob + * @nodeoffset: offset of the node whose property to change + * @name: name of the property to change + * @val: 64-bit integer value to append to the property (native endian) + * + * fdt_appendprop_u64() appends the given 64-bit integer value + * (converting to big-endian if necessary) to the value of the named + * property in the given node, or creates a new property with that + * value if it does not already exist. + * + * This function may insert data into the blob, and will therefore + * change the offsets of some existing nodes. + * + * returns: + * 0, on success + * -FDT_ERR_NOSPACE, there is insufficient free space in the blob to + * contain the new property value + * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag + * -FDT_ERR_BADLAYOUT, + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_BADSTRUCTURE, + * -FDT_ERR_BADLAYOUT, + * -FDT_ERR_TRUNCATED, standard meanings + */ +static inline int fdt_appendprop_u64(void *fdt, int nodeoffset, + const char *name, uint64_t val) +{ + fdt64_t tmp = cpu_to_fdt64(val); + return fdt_appendprop(fdt, nodeoffset, name, &tmp, sizeof(tmp)); +} + +/** + * fdt_appendprop_cell - append a single cell value to a property + * + * This is an alternative name for fdt_appendprop_u32() + */ +static inline int fdt_appendprop_cell(void *fdt, int nodeoffset, + const char *name, uint32_t val) +{ + return fdt_appendprop_u32(fdt, nodeoffset, name, val); +} + +/** + * fdt_appendprop_string - append a string to a property + * @fdt: pointer to the device tree blob + * @nodeoffset: offset of the node whose property to change + * @name: name of the property to change + * @str: string value to append to the property + * + * fdt_appendprop_string() appends the given string to the value of + * the named property in the given node, or creates a new property + * with that value if it does not already exist. + * + * This function may insert data into the blob, and will therefore + * change the offsets of some existing nodes. + * + * returns: + * 0, on success + * -FDT_ERR_NOSPACE, there is insufficient free space in the blob to + * contain the new property value + * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag + * -FDT_ERR_BADLAYOUT, + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_BADSTRUCTURE, + * -FDT_ERR_BADLAYOUT, + * -FDT_ERR_TRUNCATED, standard meanings + */ +#define fdt_appendprop_string(fdt, nodeoffset, name, str) \ + fdt_appendprop((fdt), (nodeoffset), (name), (str), strlen(str)+1) + +/** + * fdt_appendprop_addrrange - append a address range property + * @fdt: pointer to the device tree blob + * @parent: offset of the parent node + * @nodeoffset: offset of the node to add a property at + * @name: name of property + * @addr: start address of a given range + * @size: size of a given range + * + * fdt_appendprop_addrrange() appends an address range value (start + * address and size) to the value of the named property in the given + * node, or creates a new property with that value if it does not + * already exist. + * If "name" is not specified, a default "reg" is used. + * Cell sizes are determined by parent's #address-cells and #size-cells. + * + * This function may insert data into the blob, and will therefore + * change the offsets of some existing nodes. + * + * returns: + * 0, on success + * -FDT_ERR_BADLAYOUT, + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADNCELLS, if the node has a badly formatted or invalid + * #address-cells property + * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag + * -FDT_ERR_BADSTATE, + * -FDT_ERR_BADSTRUCTURE, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADVALUE, addr or size doesn't fit to respective cells size + * -FDT_ERR_NOSPACE, there is insufficient free space in the blob to + * contain a new property + * -FDT_ERR_TRUNCATED, standard meanings + */ +int fdt_appendprop_addrrange(void *fdt, int parent, int nodeoffset, + const char *name, uint64_t addr, uint64_t size); + +/** + * fdt_delprop - delete a property + * @fdt: pointer to the device tree blob + * @nodeoffset: offset of the node whose property to nop + * @name: name of the property to nop + * + * fdt_del_property() will delete the given property. + * + * This function will delete data from the blob, and will therefore + * change the offsets of some existing nodes. + * + * returns: + * 0, on success + * -FDT_ERR_NOTFOUND, node does not have the named property + * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag + * -FDT_ERR_BADLAYOUT, + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_BADSTRUCTURE, + * -FDT_ERR_TRUNCATED, standard meanings + */ +int fdt_delprop(void *fdt, int nodeoffset, const char *name); + +/** + * fdt_add_subnode_namelen - creates a new node based on substring + * @fdt: pointer to the device tree blob + * @parentoffset: structure block offset of a node + * @name: name of the subnode to locate + * @namelen: number of characters of name to consider + * + * Identical to fdt_add_subnode(), but use only the first namelen + * characters of name as the name of the new node. This is useful for + * creating subnodes based on a portion of a larger string, such as a + * full path. + */ +#ifndef SWIG /* Not available in Python */ +int fdt_add_subnode_namelen(void *fdt, int parentoffset, + const char *name, int namelen); +#endif + +/** + * fdt_add_subnode - creates a new node + * @fdt: pointer to the device tree blob + * @parentoffset: structure block offset of a node + * @name: name of the subnode to locate + * + * fdt_add_subnode() creates a new node as a subnode of the node at + * structure block offset parentoffset, with the given name (which + * should include the unit address, if any). + * + * This function will insert data into the blob, and will therefore + * change the offsets of some existing nodes. + + * returns: + * structure block offset of the created nodeequested subnode (>=0), on + * success + * -FDT_ERR_NOTFOUND, if the requested subnode does not exist + * -FDT_ERR_BADOFFSET, if parentoffset did not point to an FDT_BEGIN_NODE + * tag + * -FDT_ERR_EXISTS, if the node at parentoffset already has a subnode of + * the given name + * -FDT_ERR_NOSPACE, if there is insufficient free space in the + * blob to contain the new node + * -FDT_ERR_NOSPACE + * -FDT_ERR_BADLAYOUT + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_BADSTRUCTURE, + * -FDT_ERR_TRUNCATED, standard meanings. + */ +int fdt_add_subnode(void *fdt, int parentoffset, const char *name); + +/** + * fdt_del_node - delete a node (subtree) + * @fdt: pointer to the device tree blob + * @nodeoffset: offset of the node to nop + * + * fdt_del_node() will remove the given node, including all its + * subnodes if any, from the blob. + * + * This function will delete data from the blob, and will therefore + * change the offsets of some existing nodes. + * + * returns: + * 0, on success + * -FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag + * -FDT_ERR_BADLAYOUT, + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_BADSTRUCTURE, + * -FDT_ERR_TRUNCATED, standard meanings + */ +int fdt_del_node(void *fdt, int nodeoffset); + +/** + * fdt_overlay_apply - Applies a DT overlay on a base DT + * @fdt: pointer to the base device tree blob + * @fdto: pointer to the device tree overlay blob + * + * fdt_overlay_apply() will apply the given device tree overlay on the + * given base device tree. + * + * Expect the base device tree to be modified, even if the function + * returns an error. + * + * returns: + * 0, on success + * -FDT_ERR_NOSPACE, there's not enough space in the base device tree + * -FDT_ERR_NOTFOUND, the overlay points to some inexistant nodes or + * properties in the base DT + * -FDT_ERR_BADPHANDLE, + * -FDT_ERR_BADOVERLAY, + * -FDT_ERR_NOPHANDLES, + * -FDT_ERR_INTERNAL, + * -FDT_ERR_BADLAYOUT, + * -FDT_ERR_BADMAGIC, + * -FDT_ERR_BADOFFSET, + * -FDT_ERR_BADPATH, + * -FDT_ERR_BADVERSION, + * -FDT_ERR_BADSTRUCTURE, + * -FDT_ERR_BADSTATE, + * -FDT_ERR_TRUNCATED, standard meanings + */ +int fdt_overlay_apply(void *fdt, void *fdto); + +/**********************************************************************/ +/* Debugging / informational functions */ +/**********************************************************************/ + +const char *fdt_strerror(int errval); + +#ifdef __cplusplus +} +#endif + +#endif /* LIBFDT_H */ diff --git a/scripts/dtc/libfdt/libfdt_env.h b/scripts/dtc/libfdt/libfdt_env.h new file mode 100644 index 000000000..73b6d4045 --- /dev/null +++ b/scripts/dtc/libfdt/libfdt_env.h @@ -0,0 +1,96 @@ +/* SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-2-Clause) */ +#ifndef LIBFDT_ENV_H +#define LIBFDT_ENV_H +/* + * libfdt - Flat Device Tree manipulation + * Copyright (C) 2006 David Gibson, IBM Corporation. + * Copyright 2012 Kim Phillips, Freescale Semiconductor. + */ + +#include <stdbool.h> +#include <stddef.h> +#include <stdint.h> +#include <stdlib.h> +#include <string.h> +#include <limits.h> + +#ifdef __CHECKER__ +#define FDT_FORCE __attribute__((force)) +#define FDT_BITWISE __attribute__((bitwise)) +#else +#define FDT_FORCE +#define FDT_BITWISE +#endif + +typedef uint16_t FDT_BITWISE fdt16_t; +typedef uint32_t FDT_BITWISE fdt32_t; +typedef uint64_t FDT_BITWISE fdt64_t; + +#define EXTRACT_BYTE(x, n) ((unsigned long long)((uint8_t *)&x)[n]) +#define CPU_TO_FDT16(x) ((EXTRACT_BYTE(x, 0) << 8) | EXTRACT_BYTE(x, 1)) +#define CPU_TO_FDT32(x) ((EXTRACT_BYTE(x, 0) << 24) | (EXTRACT_BYTE(x, 1) << 16) | \ + (EXTRACT_BYTE(x, 2) << 8) | EXTRACT_BYTE(x, 3)) +#define CPU_TO_FDT64(x) ((EXTRACT_BYTE(x, 0) << 56) | (EXTRACT_BYTE(x, 1) << 48) | \ + (EXTRACT_BYTE(x, 2) << 40) | (EXTRACT_BYTE(x, 3) << 32) | \ + (EXTRACT_BYTE(x, 4) << 24) | (EXTRACT_BYTE(x, 5) << 16) | \ + (EXTRACT_BYTE(x, 6) << 8) | EXTRACT_BYTE(x, 7)) + +static inline uint16_t fdt16_to_cpu(fdt16_t x) +{ + return (FDT_FORCE uint16_t)CPU_TO_FDT16(x); +} +static inline fdt16_t cpu_to_fdt16(uint16_t x) +{ + return (FDT_FORCE fdt16_t)CPU_TO_FDT16(x); +} + +static inline uint32_t fdt32_to_cpu(fdt32_t x) +{ + return (FDT_FORCE uint32_t)CPU_TO_FDT32(x); +} +static inline fdt32_t cpu_to_fdt32(uint32_t x) +{ + return (FDT_FORCE fdt32_t)CPU_TO_FDT32(x); +} + +static inline uint64_t fdt64_to_cpu(fdt64_t x) +{ + return (FDT_FORCE uint64_t)CPU_TO_FDT64(x); +} +static inline fdt64_t cpu_to_fdt64(uint64_t x) +{ + return (FDT_FORCE fdt64_t)CPU_TO_FDT64(x); +} +#undef CPU_TO_FDT64 +#undef CPU_TO_FDT32 +#undef CPU_TO_FDT16 +#undef EXTRACT_BYTE + +#ifdef __APPLE__ +#include <AvailabilityMacros.h> + +/* strnlen() is not available on Mac OS < 10.7 */ +# if !defined(MAC_OS_X_VERSION_10_7) || (MAC_OS_X_VERSION_MAX_ALLOWED < \ + MAC_OS_X_VERSION_10_7) + +#define strnlen fdt_strnlen + +/* + * fdt_strnlen: returns the length of a string or max_count - which ever is + * smallest. + * Input 1 string: the string whose size is to be determined + * Input 2 max_count: the maximum value returned by this function + * Output: length of the string or max_count (the smallest of the two) + */ +static inline size_t fdt_strnlen(const char *string, size_t max_count) +{ + const char *p = memchr(string, 0, max_count); + return p ? p - string : max_count; +} + +#endif /* !defined(MAC_OS_X_VERSION_10_7) || (MAC_OS_X_VERSION_MAX_ALLOWED < + MAC_OS_X_VERSION_10_7) */ + +#endif /* __APPLE__ */ + +#endif /* LIBFDT_ENV_H */ diff --git a/scripts/dtc/libfdt/libfdt_internal.h b/scripts/dtc/libfdt/libfdt_internal.h new file mode 100644 index 000000000..d4e0bd49c --- /dev/null +++ b/scripts/dtc/libfdt/libfdt_internal.h @@ -0,0 +1,173 @@ +/* SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-2-Clause) */ +#ifndef LIBFDT_INTERNAL_H +#define LIBFDT_INTERNAL_H +/* + * libfdt - Flat Device Tree manipulation + * Copyright (C) 2006 David Gibson, IBM Corporation. + */ +#include <fdt.h> + +#define FDT_ALIGN(x, a) (((x) + (a) - 1) & ~((a) - 1)) +#define FDT_TAGALIGN(x) (FDT_ALIGN((x), FDT_TAGSIZE)) + +int32_t fdt_ro_probe_(const void *fdt); +#define FDT_RO_PROBE(fdt) \ + { \ + int32_t totalsize_; \ + if ((totalsize_ = fdt_ro_probe_(fdt)) < 0) \ + return totalsize_; \ + } + +int fdt_check_node_offset_(const void *fdt, int offset); +int fdt_check_prop_offset_(const void *fdt, int offset); +const char *fdt_find_string_(const char *strtab, int tabsize, const char *s); +int fdt_node_end_offset_(void *fdt, int nodeoffset); + +static inline const void *fdt_offset_ptr_(const void *fdt, int offset) +{ + return (const char *)fdt + fdt_off_dt_struct(fdt) + offset; +} + +static inline void *fdt_offset_ptr_w_(void *fdt, int offset) +{ + return (void *)(uintptr_t)fdt_offset_ptr_(fdt, offset); +} + +static inline const struct fdt_reserve_entry *fdt_mem_rsv_(const void *fdt, int n) +{ + const struct fdt_reserve_entry *rsv_table = + (const struct fdt_reserve_entry *) + ((const char *)fdt + fdt_off_mem_rsvmap(fdt)); + + return rsv_table + n; +} +static inline struct fdt_reserve_entry *fdt_mem_rsv_w_(void *fdt, int n) +{ + return (void *)(uintptr_t)fdt_mem_rsv_(fdt, n); +} + +#define FDT_SW_MAGIC (~FDT_MAGIC) + +/**********************************************************************/ +/* Checking controls */ +/**********************************************************************/ + +#ifndef FDT_ASSUME_MASK +#define FDT_ASSUME_MASK 0 +#endif + +/* + * Defines assumptions which can be enabled. Each of these can be enabled + * individually. For maximum safety, don't enable any assumptions! + * + * For minimal code size and no safety, use ASSUME_PERFECT at your own risk. + * You should have another method of validating the device tree, such as a + * signature or hash check before using libfdt. + * + * For situations where security is not a concern it may be safe to enable + * ASSUME_SANE. + */ +enum { + /* + * This does essentially no checks. Only the latest device-tree + * version is correctly handled. Inconsistencies or errors in the device + * tree may cause undefined behaviour or crashes. Invalid parameters + * passed to libfdt may do the same. + * + * If an error occurs when modifying the tree it may leave the tree in + * an intermediate (but valid) state. As an example, adding a property + * where there is insufficient space may result in the property name + * being added to the string table even though the property itself is + * not added to the struct section. + * + * Only use this if you have a fully validated device tree with + * the latest supported version and wish to minimise code size. + */ + ASSUME_PERFECT = 0xff, + + /* + * This assumes that the device tree is sane. i.e. header metadata + * and basic hierarchy are correct. + * + * With this assumption enabled, normal device trees produced by libfdt + * and the compiler should be handled safely. Malicious device trees and + * complete garbage may cause libfdt to behave badly or crash. Truncated + * device trees (e.g. those only partially loaded) can also cause + * problems. + * + * Note: Only checks that relate exclusively to the device tree itself + * (not the parameters passed to libfdt) are disabled by this + * assumption. This includes checking headers, tags and the like. + */ + ASSUME_VALID_DTB = 1 << 0, + + /* + * This builds on ASSUME_VALID_DTB and further assumes that libfdt + * functions are called with valid parameters, i.e. not trigger + * FDT_ERR_BADOFFSET or offsets that are out of bounds. It disables any + * extensive checking of parameters and the device tree, making various + * assumptions about correctness. + * + * It doesn't make sense to enable this assumption unless + * ASSUME_VALID_DTB is also enabled. + */ + ASSUME_VALID_INPUT = 1 << 1, + + /* + * This disables checks for device-tree version and removes all code + * which handles older versions. + * + * Only enable this if you know you have a device tree with the latest + * version. + */ + ASSUME_LATEST = 1 << 2, + + /* + * This assumes that it is OK for a failed addition to the device tree, + * due to lack of space or some other problem, to skip any rollback + * steps (such as dropping the property name from the string table). + * This is safe to enable in most circumstances, even though it may + * leave the tree in a sub-optimal state. + */ + ASSUME_NO_ROLLBACK = 1 << 3, + + /* + * This assumes that the device tree components appear in a 'convenient' + * order, i.e. the memory reservation block first, then the structure + * block and finally the string block. + * + * This order is not specified by the device-tree specification, + * but is expected by libfdt. The device-tree compiler always created + * device trees with this order. + * + * This assumption disables a check in fdt_open_into() and removes the + * ability to fix the problem there. This is safe if you know that the + * device tree is correctly ordered. See fdt_blocks_misordered_(). + */ + ASSUME_LIBFDT_ORDER = 1 << 4, + + /* + * This assumes that libfdt itself does not have any internal bugs. It + * drops certain checks that should never be needed unless libfdt has an + * undiscovered bug. + * + * This can generally be considered safe to enable. + */ + ASSUME_LIBFDT_FLAWLESS = 1 << 5, +}; + +/** + * can_assume_() - check if a particular assumption is enabled + * + * @mask: Mask to check (ASSUME_...) + * @return true if that assumption is enabled, else false + */ +static inline bool can_assume_(int mask) +{ + return FDT_ASSUME_MASK & mask; +} + +/** helper macros for checking assumptions */ +#define can_assume(_assume) can_assume_(ASSUME_ ## _assume) + +#endif /* LIBFDT_INTERNAL_H */ |