summaryrefslogtreecommitdiffstats
path: root/sound/pci/ice1712/se.c
diff options
context:
space:
mode:
Diffstat (limited to '')
-rw-r--r--sound/pci/ice1712/se.c752
1 files changed, 752 insertions, 0 deletions
diff --git a/sound/pci/ice1712/se.c b/sound/pci/ice1712/se.c
new file mode 100644
index 000000000..ffa9d8860
--- /dev/null
+++ b/sound/pci/ice1712/se.c
@@ -0,0 +1,752 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * ALSA driver for ICEnsemble VT1724 (Envy24HT)
+ *
+ * Lowlevel functions for ONKYO WAVIO SE-90PCI and SE-200PCI
+ *
+ * Copyright (c) 2007 Shin-ya Okada sh_okada(at)d4.dion.ne.jp
+ * (at) -> @
+ */
+
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <sound/core.h>
+#include <sound/tlv.h>
+
+#include "ice1712.h"
+#include "envy24ht.h"
+#include "se.h"
+
+struct se_spec {
+ struct {
+ unsigned char ch1, ch2;
+ } vol[8];
+};
+
+/****************************************************************************/
+/* ONKYO WAVIO SE-200PCI */
+/****************************************************************************/
+/*
+ * system configuration ICE_EEP2_SYSCONF=0x4b
+ * XIN1 49.152MHz
+ * not have UART
+ * one stereo ADC and a S/PDIF receiver connected
+ * four stereo DACs connected
+ *
+ * AC-Link configuration ICE_EEP2_ACLINK=0x80
+ * use I2C, not use AC97
+ *
+ * I2S converters feature ICE_EEP2_I2S=0x78
+ * I2S codec has no volume/mute control feature
+ * I2S codec supports 96KHz and 192KHz
+ * I2S codec 24bits
+ *
+ * S/PDIF configuration ICE_EEP2_SPDIF=0xc3
+ * Enable integrated S/PDIF transmitter
+ * internal S/PDIF out implemented
+ * S/PDIF is stereo
+ * External S/PDIF out implemented
+ *
+ *
+ * ** connected chips **
+ *
+ * WM8740
+ * A 2ch-DAC of main outputs.
+ * It setuped as I2S mode by wire, so no way to setup from software.
+ * The sample-rate are automatically changed.
+ * ML/I2S (28pin) --------+
+ * MC/DM1 (27pin) -- 5V |
+ * MD/DM0 (26pin) -- GND |
+ * MUTEB (25pin) -- NC |
+ * MODE (24pin) -- GND |
+ * CSBIW (23pin) --------+
+ * |
+ * RSTB (22pin) --R(1K)-+
+ * Probably it reduce the noise from the control line.
+ *
+ * WM8766
+ * A 6ch-DAC for surrounds.
+ * It's control wire was connected to GPIOxx (3-wire serial interface)
+ * ML/I2S (11pin) -- GPIO18
+ * MC/IWL (12pin) -- GPIO17
+ * MD/DM (13pin) -- GPIO16
+ * MUTE (14pin) -- GPIO01
+ *
+ * WM8776
+ * A 2ch-ADC(with 10ch-selector) plus 2ch-DAC.
+ * It's control wire was connected to SDA/SCLK (2-wire serial interface)
+ * MODE (16pin) -- R(1K) -- GND
+ * CE (17pin) -- R(1K) -- GND 2-wire mode (address=0x34)
+ * DI (18pin) -- SDA
+ * CL (19pin) -- SCLK
+ *
+ *
+ * ** output pins and device names **
+ *
+ * 7.1ch name -- output connector color -- device (-D option)
+ *
+ * FRONT 2ch -- green -- plughw:0,0
+ * CENTER(Lch) SUBWOOFER(Rch) -- black -- plughw:0,2,0
+ * SURROUND 2ch -- orange -- plughw:0,2,1
+ * SURROUND BACK 2ch -- white -- plughw:0,2,2
+ *
+ */
+
+
+/****************************************************************************/
+/* WM8740 interface */
+/****************************************************************************/
+
+static void se200pci_WM8740_init(struct snd_ice1712 *ice)
+{
+ /* nothing to do */
+}
+
+
+static void se200pci_WM8740_set_pro_rate(struct snd_ice1712 *ice,
+ unsigned int rate)
+{
+ /* nothing to do */
+}
+
+
+/****************************************************************************/
+/* WM8766 interface */
+/****************************************************************************/
+
+static void se200pci_WM8766_write(struct snd_ice1712 *ice,
+ unsigned int addr, unsigned int data)
+{
+ unsigned int st;
+ unsigned int bits;
+ int i;
+ const unsigned int DATA = 0x010000;
+ const unsigned int CLOCK = 0x020000;
+ const unsigned int LOAD = 0x040000;
+ const unsigned int ALL_MASK = (DATA | CLOCK | LOAD);
+
+ snd_ice1712_save_gpio_status(ice);
+
+ st = ((addr & 0x7f) << 9) | (data & 0x1ff);
+ snd_ice1712_gpio_set_dir(ice, ice->gpio.direction | ALL_MASK);
+ snd_ice1712_gpio_set_mask(ice, ice->gpio.write_mask & ~ALL_MASK);
+ bits = snd_ice1712_gpio_read(ice) & ~ALL_MASK;
+
+ snd_ice1712_gpio_write(ice, bits);
+ for (i = 0; i < 16; i++) {
+ udelay(1);
+ bits &= ~CLOCK;
+ st = (st << 1);
+ if (st & 0x10000)
+ bits |= DATA;
+ else
+ bits &= ~DATA;
+
+ snd_ice1712_gpio_write(ice, bits);
+
+ udelay(1);
+ bits |= CLOCK;
+ snd_ice1712_gpio_write(ice, bits);
+ }
+
+ udelay(1);
+ bits |= LOAD;
+ snd_ice1712_gpio_write(ice, bits);
+
+ udelay(1);
+ bits |= (DATA | CLOCK);
+ snd_ice1712_gpio_write(ice, bits);
+
+ snd_ice1712_restore_gpio_status(ice);
+}
+
+static void se200pci_WM8766_set_volume(struct snd_ice1712 *ice, int ch,
+ unsigned int vol1, unsigned int vol2)
+{
+ switch (ch) {
+ case 0:
+ se200pci_WM8766_write(ice, 0x000, vol1);
+ se200pci_WM8766_write(ice, 0x001, vol2 | 0x100);
+ break;
+ case 1:
+ se200pci_WM8766_write(ice, 0x004, vol1);
+ se200pci_WM8766_write(ice, 0x005, vol2 | 0x100);
+ break;
+ case 2:
+ se200pci_WM8766_write(ice, 0x006, vol1);
+ se200pci_WM8766_write(ice, 0x007, vol2 | 0x100);
+ break;
+ }
+}
+
+static void se200pci_WM8766_init(struct snd_ice1712 *ice)
+{
+ se200pci_WM8766_write(ice, 0x1f, 0x000); /* RESET ALL */
+ udelay(10);
+
+ se200pci_WM8766_set_volume(ice, 0, 0, 0); /* volume L=0 R=0 */
+ se200pci_WM8766_set_volume(ice, 1, 0, 0); /* volume L=0 R=0 */
+ se200pci_WM8766_set_volume(ice, 2, 0, 0); /* volume L=0 R=0 */
+
+ se200pci_WM8766_write(ice, 0x03, 0x022); /* serial mode I2S-24bits */
+ se200pci_WM8766_write(ice, 0x0a, 0x080); /* MCLK=256fs */
+ se200pci_WM8766_write(ice, 0x12, 0x000); /* MDP=0 */
+ se200pci_WM8766_write(ice, 0x15, 0x000); /* MDP=0 */
+ se200pci_WM8766_write(ice, 0x09, 0x000); /* demp=off mute=off */
+
+ se200pci_WM8766_write(ice, 0x02, 0x124); /* ch-assign L=L R=R RESET */
+ se200pci_WM8766_write(ice, 0x02, 0x120); /* ch-assign L=L R=R */
+}
+
+static void se200pci_WM8766_set_pro_rate(struct snd_ice1712 *ice,
+ unsigned int rate)
+{
+ if (rate > 96000)
+ se200pci_WM8766_write(ice, 0x0a, 0x000); /* MCLK=128fs */
+ else
+ se200pci_WM8766_write(ice, 0x0a, 0x080); /* MCLK=256fs */
+}
+
+
+/****************************************************************************/
+/* WM8776 interface */
+/****************************************************************************/
+
+static void se200pci_WM8776_write(struct snd_ice1712 *ice,
+ unsigned int addr, unsigned int data)
+{
+ unsigned int val;
+
+ val = (addr << 9) | data;
+ snd_vt1724_write_i2c(ice, 0x34, val >> 8, val & 0xff);
+}
+
+
+static void se200pci_WM8776_set_output_volume(struct snd_ice1712 *ice,
+ unsigned int vol1, unsigned int vol2)
+{
+ se200pci_WM8776_write(ice, 0x03, vol1);
+ se200pci_WM8776_write(ice, 0x04, vol2 | 0x100);
+}
+
+static void se200pci_WM8776_set_input_volume(struct snd_ice1712 *ice,
+ unsigned int vol1, unsigned int vol2)
+{
+ se200pci_WM8776_write(ice, 0x0e, vol1);
+ se200pci_WM8776_write(ice, 0x0f, vol2 | 0x100);
+}
+
+static const char * const se200pci_sel[] = {
+ "LINE-IN", "CD-IN", "MIC-IN", "ALL-MIX", NULL
+};
+
+static void se200pci_WM8776_set_input_selector(struct snd_ice1712 *ice,
+ unsigned int sel)
+{
+ static const unsigned char vals[] = {
+ /* LINE, CD, MIC, ALL, GND */
+ 0x10, 0x04, 0x08, 0x1c, 0x03
+ };
+ if (sel > 4)
+ sel = 4;
+ se200pci_WM8776_write(ice, 0x15, vals[sel]);
+}
+
+static void se200pci_WM8776_set_afl(struct snd_ice1712 *ice, unsigned int afl)
+{
+ /* AFL -- After Fader Listening */
+ if (afl)
+ se200pci_WM8776_write(ice, 0x16, 0x005);
+ else
+ se200pci_WM8776_write(ice, 0x16, 0x001);
+}
+
+static const char * const se200pci_agc[] = {
+ "Off", "LimiterMode", "ALCMode", NULL
+};
+
+static void se200pci_WM8776_set_agc(struct snd_ice1712 *ice, unsigned int agc)
+{
+ /* AGC -- Auto Gain Control of the input */
+ switch (agc) {
+ case 0:
+ se200pci_WM8776_write(ice, 0x11, 0x000); /* Off */
+ break;
+ case 1:
+ se200pci_WM8776_write(ice, 0x10, 0x07b);
+ se200pci_WM8776_write(ice, 0x11, 0x100); /* LimiterMode */
+ break;
+ case 2:
+ se200pci_WM8776_write(ice, 0x10, 0x1fb);
+ se200pci_WM8776_write(ice, 0x11, 0x100); /* ALCMode */
+ break;
+ }
+}
+
+static void se200pci_WM8776_init(struct snd_ice1712 *ice)
+{
+ int i;
+ static const unsigned short default_values[] = {
+ 0x100, 0x100, 0x100,
+ 0x100, 0x100, 0x100,
+ 0x000, 0x090, 0x000, 0x000,
+ 0x022, 0x022, 0x022,
+ 0x008, 0x0cf, 0x0cf, 0x07b, 0x000,
+ 0x032, 0x000, 0x0a6, 0x001, 0x001
+ };
+
+ se200pci_WM8776_write(ice, 0x17, 0x000); /* reset all */
+ /* ADC and DAC interface is I2S 24bits mode */
+ /* The sample-rate are automatically changed */
+ udelay(10);
+ /* BUT my board can not do reset all, so I load all by manually. */
+ for (i = 0; i < ARRAY_SIZE(default_values); i++)
+ se200pci_WM8776_write(ice, i, default_values[i]);
+
+ se200pci_WM8776_set_input_selector(ice, 0);
+ se200pci_WM8776_set_afl(ice, 0);
+ se200pci_WM8776_set_agc(ice, 0);
+ se200pci_WM8776_set_input_volume(ice, 0, 0);
+ se200pci_WM8776_set_output_volume(ice, 0, 0);
+
+ /* head phone mute and power down */
+ se200pci_WM8776_write(ice, 0x00, 0);
+ se200pci_WM8776_write(ice, 0x01, 0);
+ se200pci_WM8776_write(ice, 0x02, 0x100);
+ se200pci_WM8776_write(ice, 0x0d, 0x080);
+}
+
+static void se200pci_WM8776_set_pro_rate(struct snd_ice1712 *ice,
+ unsigned int rate)
+{
+ /* nothing to do */
+}
+
+
+/****************************************************************************/
+/* runtime interface */
+/****************************************************************************/
+
+static void se200pci_set_pro_rate(struct snd_ice1712 *ice, unsigned int rate)
+{
+ se200pci_WM8740_set_pro_rate(ice, rate);
+ se200pci_WM8766_set_pro_rate(ice, rate);
+ se200pci_WM8776_set_pro_rate(ice, rate);
+}
+
+struct se200pci_control {
+ const char *name;
+ enum {
+ WM8766,
+ WM8776in,
+ WM8776out,
+ WM8776sel,
+ WM8776agc,
+ WM8776afl
+ } target;
+ enum { VOLUME1, VOLUME2, BOOLEAN, ENUM } type;
+ int ch;
+ const char * const *member;
+ const char *comment;
+};
+
+static const struct se200pci_control se200pci_cont[] = {
+ {
+ .name = "Front Playback Volume",
+ .target = WM8776out,
+ .type = VOLUME1,
+ .comment = "Front(green)"
+ },
+ {
+ .name = "Side Playback Volume",
+ .target = WM8766,
+ .type = VOLUME1,
+ .ch = 1,
+ .comment = "Surround(orange)"
+ },
+ {
+ .name = "Surround Playback Volume",
+ .target = WM8766,
+ .type = VOLUME1,
+ .ch = 2,
+ .comment = "SurroundBack(white)"
+ },
+ {
+ .name = "CLFE Playback Volume",
+ .target = WM8766,
+ .type = VOLUME1,
+ .ch = 0,
+ .comment = "Center(Lch)&SubWoofer(Rch)(black)"
+ },
+ {
+ .name = "Capture Volume",
+ .target = WM8776in,
+ .type = VOLUME2
+ },
+ {
+ .name = "Capture Select",
+ .target = WM8776sel,
+ .type = ENUM,
+ .member = se200pci_sel
+ },
+ {
+ .name = "AGC Capture Mode",
+ .target = WM8776agc,
+ .type = ENUM,
+ .member = se200pci_agc
+ },
+ {
+ .name = "AFL Bypass Playback Switch",
+ .target = WM8776afl,
+ .type = BOOLEAN
+ }
+};
+
+static int se200pci_get_enum_count(int n)
+{
+ const char * const *member;
+ int c;
+
+ member = se200pci_cont[n].member;
+ if (!member)
+ return 0;
+ for (c = 0; member[c]; c++)
+ ;
+ return c;
+}
+
+static int se200pci_cont_volume_info(struct snd_kcontrol *kc,
+ struct snd_ctl_elem_info *uinfo)
+{
+ uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
+ uinfo->count = 2;
+ uinfo->value.integer.min = 0; /* mute */
+ uinfo->value.integer.max = 0xff; /* 0dB */
+ return 0;
+}
+
+#define se200pci_cont_boolean_info snd_ctl_boolean_mono_info
+
+static int se200pci_cont_enum_info(struct snd_kcontrol *kc,
+ struct snd_ctl_elem_info *uinfo)
+{
+ int n, c;
+
+ n = kc->private_value;
+ c = se200pci_get_enum_count(n);
+ if (!c)
+ return -EINVAL;
+ return snd_ctl_enum_info(uinfo, 1, c, se200pci_cont[n].member);
+}
+
+static int se200pci_cont_volume_get(struct snd_kcontrol *kc,
+ struct snd_ctl_elem_value *uc)
+{
+ struct snd_ice1712 *ice = snd_kcontrol_chip(kc);
+ struct se_spec *spec = ice->spec;
+ int n = kc->private_value;
+ uc->value.integer.value[0] = spec->vol[n].ch1;
+ uc->value.integer.value[1] = spec->vol[n].ch2;
+ return 0;
+}
+
+static int se200pci_cont_boolean_get(struct snd_kcontrol *kc,
+ struct snd_ctl_elem_value *uc)
+{
+ struct snd_ice1712 *ice = snd_kcontrol_chip(kc);
+ struct se_spec *spec = ice->spec;
+ int n = kc->private_value;
+ uc->value.integer.value[0] = spec->vol[n].ch1;
+ return 0;
+}
+
+static int se200pci_cont_enum_get(struct snd_kcontrol *kc,
+ struct snd_ctl_elem_value *uc)
+{
+ struct snd_ice1712 *ice = snd_kcontrol_chip(kc);
+ struct se_spec *spec = ice->spec;
+ int n = kc->private_value;
+ uc->value.enumerated.item[0] = spec->vol[n].ch1;
+ return 0;
+}
+
+static void se200pci_cont_update(struct snd_ice1712 *ice, int n)
+{
+ struct se_spec *spec = ice->spec;
+ switch (se200pci_cont[n].target) {
+ case WM8766:
+ se200pci_WM8766_set_volume(ice,
+ se200pci_cont[n].ch,
+ spec->vol[n].ch1,
+ spec->vol[n].ch2);
+ break;
+
+ case WM8776in:
+ se200pci_WM8776_set_input_volume(ice,
+ spec->vol[n].ch1,
+ spec->vol[n].ch2);
+ break;
+
+ case WM8776out:
+ se200pci_WM8776_set_output_volume(ice,
+ spec->vol[n].ch1,
+ spec->vol[n].ch2);
+ break;
+
+ case WM8776sel:
+ se200pci_WM8776_set_input_selector(ice,
+ spec->vol[n].ch1);
+ break;
+
+ case WM8776agc:
+ se200pci_WM8776_set_agc(ice, spec->vol[n].ch1);
+ break;
+
+ case WM8776afl:
+ se200pci_WM8776_set_afl(ice, spec->vol[n].ch1);
+ break;
+
+ default:
+ break;
+ }
+}
+
+static int se200pci_cont_volume_put(struct snd_kcontrol *kc,
+ struct snd_ctl_elem_value *uc)
+{
+ struct snd_ice1712 *ice = snd_kcontrol_chip(kc);
+ struct se_spec *spec = ice->spec;
+ int n = kc->private_value;
+ unsigned int vol1, vol2;
+ int changed;
+
+ changed = 0;
+ vol1 = uc->value.integer.value[0] & 0xff;
+ vol2 = uc->value.integer.value[1] & 0xff;
+ if (spec->vol[n].ch1 != vol1) {
+ spec->vol[n].ch1 = vol1;
+ changed = 1;
+ }
+ if (spec->vol[n].ch2 != vol2) {
+ spec->vol[n].ch2 = vol2;
+ changed = 1;
+ }
+ if (changed)
+ se200pci_cont_update(ice, n);
+
+ return changed;
+}
+
+static int se200pci_cont_boolean_put(struct snd_kcontrol *kc,
+ struct snd_ctl_elem_value *uc)
+{
+ struct snd_ice1712 *ice = snd_kcontrol_chip(kc);
+ struct se_spec *spec = ice->spec;
+ int n = kc->private_value;
+ unsigned int vol1;
+
+ vol1 = !!uc->value.integer.value[0];
+ if (spec->vol[n].ch1 != vol1) {
+ spec->vol[n].ch1 = vol1;
+ se200pci_cont_update(ice, n);
+ return 1;
+ }
+ return 0;
+}
+
+static int se200pci_cont_enum_put(struct snd_kcontrol *kc,
+ struct snd_ctl_elem_value *uc)
+{
+ struct snd_ice1712 *ice = snd_kcontrol_chip(kc);
+ struct se_spec *spec = ice->spec;
+ int n = kc->private_value;
+ unsigned int vol1;
+
+ vol1 = uc->value.enumerated.item[0];
+ if (vol1 >= se200pci_get_enum_count(n))
+ return -EINVAL;
+ if (spec->vol[n].ch1 != vol1) {
+ spec->vol[n].ch1 = vol1;
+ se200pci_cont_update(ice, n);
+ return 1;
+ }
+ return 0;
+}
+
+static const DECLARE_TLV_DB_SCALE(db_scale_gain1, -12750, 50, 1);
+static const DECLARE_TLV_DB_SCALE(db_scale_gain2, -10350, 50, 1);
+
+static int se200pci_add_controls(struct snd_ice1712 *ice)
+{
+ int i;
+ struct snd_kcontrol_new cont;
+ int err;
+
+ memset(&cont, 0, sizeof(cont));
+ cont.iface = SNDRV_CTL_ELEM_IFACE_MIXER;
+ for (i = 0; i < ARRAY_SIZE(se200pci_cont); i++) {
+ cont.private_value = i;
+ cont.name = se200pci_cont[i].name;
+ cont.access = SNDRV_CTL_ELEM_ACCESS_READWRITE;
+ cont.tlv.p = NULL;
+ switch (se200pci_cont[i].type) {
+ case VOLUME1:
+ case VOLUME2:
+ cont.info = se200pci_cont_volume_info;
+ cont.get = se200pci_cont_volume_get;
+ cont.put = se200pci_cont_volume_put;
+ cont.access |= SNDRV_CTL_ELEM_ACCESS_TLV_READ;
+ if (se200pci_cont[i].type == VOLUME1)
+ cont.tlv.p = db_scale_gain1;
+ else
+ cont.tlv.p = db_scale_gain2;
+ break;
+ case BOOLEAN:
+ cont.info = se200pci_cont_boolean_info;
+ cont.get = se200pci_cont_boolean_get;
+ cont.put = se200pci_cont_boolean_put;
+ break;
+ case ENUM:
+ cont.info = se200pci_cont_enum_info;
+ cont.get = se200pci_cont_enum_get;
+ cont.put = se200pci_cont_enum_put;
+ break;
+ default:
+ snd_BUG();
+ return -EINVAL;
+ }
+ err = snd_ctl_add(ice->card, snd_ctl_new1(&cont, ice));
+ if (err < 0)
+ return err;
+ }
+
+ return 0;
+}
+
+
+/****************************************************************************/
+/* ONKYO WAVIO SE-90PCI */
+/****************************************************************************/
+/*
+ * system configuration ICE_EEP2_SYSCONF=0x4b
+ * AC-Link configuration ICE_EEP2_ACLINK=0x80
+ * I2S converters feature ICE_EEP2_I2S=0x78
+ * S/PDIF configuration ICE_EEP2_SPDIF=0xc3
+ *
+ * ** connected chip **
+ *
+ * WM8716
+ * A 2ch-DAC of main outputs.
+ * It setuped as I2S mode by wire, so no way to setup from software.
+ * ML/I2S (28pin) -- +5V
+ * MC/DM1 (27pin) -- GND
+ * MC/DM0 (26pin) -- GND
+ * MUTEB (25pin) -- open (internal pull-up)
+ * MODE (24pin) -- GND
+ * CSBIWO (23pin) -- +5V
+ *
+ */
+
+ /* Nothing to do for this chip. */
+
+
+/****************************************************************************/
+/* probe/initialize/setup */
+/****************************************************************************/
+
+static int se_init(struct snd_ice1712 *ice)
+{
+ struct se_spec *spec;
+
+ spec = kzalloc(sizeof(*spec), GFP_KERNEL);
+ if (!spec)
+ return -ENOMEM;
+ ice->spec = spec;
+
+ if (ice->eeprom.subvendor == VT1724_SUBDEVICE_SE90PCI) {
+ ice->num_total_dacs = 2;
+ ice->num_total_adcs = 0;
+ ice->vt1720 = 1;
+ return 0;
+
+ } else if (ice->eeprom.subvendor == VT1724_SUBDEVICE_SE200PCI) {
+ ice->num_total_dacs = 8;
+ ice->num_total_adcs = 2;
+ se200pci_WM8740_init(ice);
+ se200pci_WM8766_init(ice);
+ se200pci_WM8776_init(ice);
+ ice->gpio.set_pro_rate = se200pci_set_pro_rate;
+ return 0;
+ }
+
+ return -ENOENT;
+}
+
+static int se_add_controls(struct snd_ice1712 *ice)
+{
+ int err;
+
+ err = 0;
+ /* nothing to do for VT1724_SUBDEVICE_SE90PCI */
+ if (ice->eeprom.subvendor == VT1724_SUBDEVICE_SE200PCI)
+ err = se200pci_add_controls(ice);
+
+ return err;
+}
+
+
+/****************************************************************************/
+/* entry point */
+/****************************************************************************/
+
+static const unsigned char se200pci_eeprom[] = {
+ [ICE_EEP2_SYSCONF] = 0x4b, /* 49.152Hz, spdif-in/ADC, 4DACs */
+ [ICE_EEP2_ACLINK] = 0x80, /* I2S */
+ [ICE_EEP2_I2S] = 0x78, /* 96k-ok, 24bit, 192k-ok */
+ [ICE_EEP2_SPDIF] = 0xc3, /* out-en, out-int, spdif-in */
+
+ [ICE_EEP2_GPIO_DIR] = 0x02, /* WM8766 mute 1=output */
+ [ICE_EEP2_GPIO_DIR1] = 0x00, /* not used */
+ [ICE_EEP2_GPIO_DIR2] = 0x07, /* WM8766 ML/MC/MD 1=output */
+
+ [ICE_EEP2_GPIO_MASK] = 0x00, /* 0=writable */
+ [ICE_EEP2_GPIO_MASK1] = 0x00, /* 0=writable */
+ [ICE_EEP2_GPIO_MASK2] = 0x00, /* 0=writable */
+
+ [ICE_EEP2_GPIO_STATE] = 0x00, /* WM8766 mute=0 */
+ [ICE_EEP2_GPIO_STATE1] = 0x00, /* not used */
+ [ICE_EEP2_GPIO_STATE2] = 0x07, /* WM8766 ML/MC/MD */
+};
+
+static const unsigned char se90pci_eeprom[] = {
+ [ICE_EEP2_SYSCONF] = 0x4b, /* 49.152Hz, spdif-in/ADC, 4DACs */
+ [ICE_EEP2_ACLINK] = 0x80, /* I2S */
+ [ICE_EEP2_I2S] = 0x78, /* 96k-ok, 24bit, 192k-ok */
+ [ICE_EEP2_SPDIF] = 0xc3, /* out-en, out-int, spdif-in */
+
+ /* ALL GPIO bits are in input mode */
+};
+
+struct snd_ice1712_card_info snd_vt1724_se_cards[] = {
+ {
+ .subvendor = VT1724_SUBDEVICE_SE200PCI,
+ .name = "ONKYO SE200PCI",
+ .model = "se200pci",
+ .chip_init = se_init,
+ .build_controls = se_add_controls,
+ .eeprom_size = sizeof(se200pci_eeprom),
+ .eeprom_data = se200pci_eeprom,
+ },
+ {
+ .subvendor = VT1724_SUBDEVICE_SE90PCI,
+ .name = "ONKYO SE90PCI",
+ .model = "se90pci",
+ .chip_init = se_init,
+ .build_controls = se_add_controls,
+ .eeprom_size = sizeof(se90pci_eeprom),
+ .eeprom_data = se90pci_eeprom,
+ },
+ {} /*terminator*/
+};
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-01 22:28:07 +0000