diff options
Diffstat (limited to 'sound/soc/atmel/Kconfig')
| -rw-r--r-- | sound/soc/atmel/Kconfig | 160 |
1 files changed, 160 insertions, 0 deletions
diff --git a/sound/soc/atmel/Kconfig b/sound/soc/atmel/Kconfig new file mode 100644 index 000000000..89210048e --- /dev/null +++ b/sound/soc/atmel/Kconfig @@ -0,0 +1,160 @@ +# SPDX-License-Identifier: GPL-2.0-only +config SND_ATMEL_SOC + tristate "SoC Audio for the Atmel System-on-Chip" + depends on HAS_IOMEM + help + Say Y or M if you want to add support for codecs attached to + the ATMEL SSC interface. You will also need + to select the audio interfaces to support below. + +if SND_ATMEL_SOC + +config SND_ATMEL_SOC_PDC + bool + +config SND_ATMEL_SOC_DMA + bool + select SND_SOC_GENERIC_DMAENGINE_PCM + +config SND_ATMEL_SOC_SSC + tristate + select SND_ATMEL_SOC_DMA + select SND_ATMEL_SOC_PDC + +config SND_ATMEL_SOC_SSC_PDC + tristate "SoC PCM DAI support for AT91 SSC controller using PDC" + depends on ATMEL_SSC + select SND_ATMEL_SOC_PDC + select SND_ATMEL_SOC_SSC + help + Say Y or M if you want to add support for Atmel SSC interface + in PDC mode configured using audio-graph-card in device-tree. + +config SND_ATMEL_SOC_SSC_DMA + tristate "SoC PCM DAI support for AT91 SSC controller using DMA" + depends on ATMEL_SSC + select SND_ATMEL_SOC_DMA + select SND_ATMEL_SOC_SSC + help + Say Y or M if you want to add support for Atmel SSC interface + in DMA mode configured using audio-graph-card in device-tree. + +config SND_AT91_SOC_SAM9G20_WM8731 + tristate "SoC Audio support for WM8731-based At91sam9g20 evaluation board" + depends on ARCH_AT91 || COMPILE_TEST + depends on ATMEL_SSC && SND_SOC_I2C_AND_SPI + select SND_ATMEL_SOC_SSC_PDC + select SND_SOC_WM8731 + help + Say Y if you want to add support for SoC audio on WM8731-based + AT91sam9g20 evaluation board. + +config SND_ATMEL_SOC_WM8904 + tristate "Atmel ASoC driver for boards using WM8904 codec" + depends on ARCH_AT91 || COMPILE_TEST + depends on ATMEL_SSC && I2C + select SND_ATMEL_SOC_SSC_DMA + select SND_SOC_WM8904 + help + Say Y if you want to add support for Atmel ASoC driver for boards using + WM8904 codec. + +config SND_AT91_SOC_SAM9X5_WM8731 + tristate "SoC Audio support for WM8731-based at91sam9x5 board" + depends on ARCH_AT91 || COMPILE_TEST + depends on ATMEL_SSC && SND_SOC_I2C_AND_SPI + select SND_ATMEL_SOC_SSC_DMA + select SND_SOC_WM8731 + help + Say Y if you want to add support for audio SoC on an + at91sam9x5 based board that is using WM8731 codec. + +config SND_ATMEL_SOC_CLASSD + tristate "Atmel ASoC driver for boards using CLASSD" + depends on ARCH_AT91 || COMPILE_TEST + select SND_SOC_GENERIC_DMAENGINE_PCM + select REGMAP_MMIO + help + Say Y if you want to add support for Atmel ASoC driver for boards using + CLASSD. + +config SND_ATMEL_SOC_PDMIC + tristate "Atmel ASoC driver for boards using PDMIC" + depends on OF && (ARCH_AT91 || COMPILE_TEST) + select SND_SOC_GENERIC_DMAENGINE_PCM + select REGMAP_MMIO + help + Say Y if you want to add support for Atmel ASoC driver for boards using + PDMIC. + +config SND_ATMEL_SOC_TSE850_PCM5142 + tristate "ASoC driver for the Axentia TSE-850" + depends on ARCH_AT91 && OF + depends on ATMEL_SSC && I2C + select SND_ATMEL_SOC_SSC_DMA + select SND_SOC_PCM512x_I2C + help + Say Y if you want to add support for the ASoC driver for the + Axentia TSE-850 with a PCM5142 codec. + +config SND_ATMEL_SOC_I2S + tristate "Atmel ASoC driver for boards using I2S" + depends on OF && (ARCH_AT91 || COMPILE_TEST) + select SND_SOC_GENERIC_DMAENGINE_PCM + select REGMAP_MMIO + help + Say Y or M if you want to add support for Atmel ASoc driver for boards + using I2S. + +config SND_SOC_MIKROE_PROTO + tristate "Support for Mikroe-PROTO board" + depends on OF + depends on SND_SOC_I2C_AND_SPI + select SND_SOC_WM8731 + help + Say Y or M if you want to add support for MikroElektronika PROTO Audio + Board. This board contains the WM8731 codec, which can be configured + using I2C over SDA (MPU Data Input) and SCL (MPU Clock Input) pins. + Both playback and capture are supported. + +config SND_MCHP_SOC_I2S_MCC + tristate "Microchip ASoC driver for boards using I2S MCC" + depends on OF && (ARCH_AT91 || COMPILE_TEST) + select SND_SOC_GENERIC_DMAENGINE_PCM + select REGMAP_MMIO + help + Say Y or M if you want to add support for I2S Multi-Channel ASoC + driver on the following Microchip platforms: + - sam9x60 + + The I2SMCC complies with the Inter-IC Sound (I2S) bus specification + and supports a Time Division Multiplexed (TDM) interface with + external multi-channel audio codecs. + +config SND_MCHP_SOC_SPDIFTX + tristate "Microchip ASoC driver for boards using S/PDIF TX" + depends on OF && (ARCH_AT91 || COMPILE_TEST) + select SND_SOC_GENERIC_DMAENGINE_PCM + select REGMAP_MMIO + help + Say Y or M if you want to add support for Microchip S/PDIF TX ASoc + driver on the following Microchip platforms: + - sama7g5 + + This S/PDIF TX driver is compliant with IEC-60958 standard and + includes programable User Data and Channel Status fields. + +config SND_MCHP_SOC_SPDIFRX + tristate "Microchip ASoC driver for boards using S/PDIF RX" + depends on OF && (ARCH_AT91 || COMPILE_TEST) + depends on COMMON_CLK + select SND_SOC_GENERIC_DMAENGINE_PCM + select REGMAP_MMIO + help + Say Y or M if you want to add support for Microchip S/PDIF RX ASoc + driver on the following Microchip platforms: + - sama7g5 + + This S/PDIF RX driver is compliant with IEC-60958 standard and + includes programable User Data and Channel Status fields. +endif |