1 files changed, 927 insertions, 0 deletions

diff --git a/sound/soc/atmel/atmel_ssc_dai.c b/sound/soc/atmel/atmel_ssc_dai.c
new file mode 100644
index 000000000..97533412c
--- /dev/null
+++ b/sound/soc/atmel/atmel_ssc_dai.c
@@ -0,0 +1,927 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * atmel_ssc_dai.c  --  ALSA SoC ATMEL SSC Audio Layer Platform driver
+ *
+ * Copyright (C) 2005 SAN People
+ * Copyright (C) 2008 Atmel
+ *
+ * Author: Sedji Gaouaou <sedji.gaouaou@atmel.com>
+ *         ATMEL CORP.
+ *
+ * Based on at91-ssc.c by
+ * Frank Mandarino <fmandarino@endrelia.com>
+ * Based on pxa2xx Platform drivers by
+ * Liam Girdwood <lrg@slimlogic.co.uk>
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/device.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/atmel_pdc.h>
+
+#include <linux/atmel-ssc.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/initval.h>
+#include <sound/soc.h>
+
+#include "atmel-pcm.h"
+#include "atmel_ssc_dai.h"
+
+
+#define NUM_SSC_DEVICES		3
+
+/*
+ * SSC PDC registers required by the PCM DMA engine.
+ */
+static struct atmel_pdc_regs pdc_tx_reg = {
+	.xpr		= ATMEL_PDC_TPR,
+	.xcr		= ATMEL_PDC_TCR,
+	.xnpr		= ATMEL_PDC_TNPR,
+	.xncr		= ATMEL_PDC_TNCR,
+};
+
+static struct atmel_pdc_regs pdc_rx_reg = {
+	.xpr		= ATMEL_PDC_RPR,
+	.xcr		= ATMEL_PDC_RCR,
+	.xnpr		= ATMEL_PDC_RNPR,
+	.xncr		= ATMEL_PDC_RNCR,
+};
+
+/*
+ * SSC & PDC status bits for transmit and receive.
+ */
+static struct atmel_ssc_mask ssc_tx_mask = {
+	.ssc_enable	= SSC_BIT(CR_TXEN),
+	.ssc_disable	= SSC_BIT(CR_TXDIS),
+	.ssc_endx	= SSC_BIT(SR_ENDTX),
+	.ssc_endbuf	= SSC_BIT(SR_TXBUFE),
+	.ssc_error	= SSC_BIT(SR_OVRUN),
+	.pdc_enable	= ATMEL_PDC_TXTEN,
+	.pdc_disable	= ATMEL_PDC_TXTDIS,
+};
+
+static struct atmel_ssc_mask ssc_rx_mask = {
+	.ssc_enable	= SSC_BIT(CR_RXEN),
+	.ssc_disable	= SSC_BIT(CR_RXDIS),
+	.ssc_endx	= SSC_BIT(SR_ENDRX),
+	.ssc_endbuf	= SSC_BIT(SR_RXBUFF),
+	.ssc_error	= SSC_BIT(SR_OVRUN),
+	.pdc_enable	= ATMEL_PDC_RXTEN,
+	.pdc_disable	= ATMEL_PDC_RXTDIS,
+};
+
+
+/*
+ * DMA parameters.
+ */
+static struct atmel_pcm_dma_params ssc_dma_params[NUM_SSC_DEVICES][2] = {
+	{{
+	.name		= "SSC0 PCM out",
+	.pdc		= &pdc_tx_reg,
+	.mask		= &ssc_tx_mask,
+	},
+	{
+	.name		= "SSC0 PCM in",
+	.pdc		= &pdc_rx_reg,
+	.mask		= &ssc_rx_mask,
+	} },
+	{{
+	.name		= "SSC1 PCM out",
+	.pdc		= &pdc_tx_reg,
+	.mask		= &ssc_tx_mask,
+	},
+	{
+	.name		= "SSC1 PCM in",
+	.pdc		= &pdc_rx_reg,
+	.mask		= &ssc_rx_mask,
+	} },
+	{{
+	.name		= "SSC2 PCM out",
+	.pdc		= &pdc_tx_reg,
+	.mask		= &ssc_tx_mask,
+	},
+	{
+	.name		= "SSC2 PCM in",
+	.pdc		= &pdc_rx_reg,
+	.mask		= &ssc_rx_mask,
+	} },
+};
+
+
+static struct atmel_ssc_info ssc_info[NUM_SSC_DEVICES] = {
+	{
+	.name		= "ssc0",
+	.dir_mask	= SSC_DIR_MASK_UNUSED,
+	.initialized	= 0,
+	},
+	{
+	.name		= "ssc1",
+	.dir_mask	= SSC_DIR_MASK_UNUSED,
+	.initialized	= 0,
+	},
+	{
+	.name		= "ssc2",
+	.dir_mask	= SSC_DIR_MASK_UNUSED,
+	.initialized	= 0,
+	},
+};
+
+
+/*
+ * SSC interrupt handler.  Passes PDC interrupts to the DMA
+ * interrupt handler in the PCM driver.
+ */
+static irqreturn_t atmel_ssc_interrupt(int irq, void *dev_id)
+{
+	struct atmel_ssc_info *ssc_p = dev_id;
+	struct atmel_pcm_dma_params *dma_params;
+	u32 ssc_sr;
+	u32 ssc_substream_mask;
+	int i;
+
+	ssc_sr = (unsigned long)ssc_readl(ssc_p->ssc->regs, SR)
+			& (unsigned long)ssc_readl(ssc_p->ssc->regs, IMR);
+
+	/*
+	 * Loop through the substreams attached to this SSC.  If
+	 * a DMA-related interrupt occurred on that substream, call
+	 * the DMA interrupt handler function, if one has been
+	 * registered in the dma_params structure by the PCM driver.
+	 */
+	for (i = 0; i < ARRAY_SIZE(ssc_p->dma_params); i++) {
+		dma_params = ssc_p->dma_params[i];
+
+		if ((dma_params != NULL) &&
+			(dma_params->dma_intr_handler != NULL)) {
+			ssc_substream_mask = (dma_params->mask->ssc_endx |
+					dma_params->mask->ssc_endbuf);
+			if (ssc_sr & ssc_substream_mask) {
+				dma_params->dma_intr_handler(ssc_sr,
+						dma_params->
+						substream);
+			}
+		}
+	}
+
+	return IRQ_HANDLED;
+}
+
+/*
+ * When the bit clock is input, limit the maximum rate according to the
+ * Serial Clock Ratio Considerations section from the SSC documentation:
+ *
+ *   The Transmitter and the Receiver can be programmed to operate
+ *   with the clock signals provided on either the TK or RK pins.
+ *   This allows the SSC to support many slave-mode data transfers.
+ *   In this case, the maximum clock speed allowed on the RK pin is:
+ *   - Peripheral clock divided by 2 if Receiver Frame Synchro is input
+ *   - Peripheral clock divided by 3 if Receiver Frame Synchro is output
+ *   In addition, the maximum clock speed allowed on the TK pin is:
+ *   - Peripheral clock divided by 6 if Transmit Frame Synchro is input
+ *   - Peripheral clock divided by 2 if Transmit Frame Synchro is output
+ *
+ * When the bit clock is output, limit the rate according to the
+ * SSC divider restrictions.
+ */
+static int atmel_ssc_hw_rule_rate(struct snd_pcm_hw_params *params,
+				  struct snd_pcm_hw_rule *rule)
+{
+	struct atmel_ssc_info *ssc_p = rule->private;
+	struct ssc_device *ssc = ssc_p->ssc;
+	struct snd_interval *i = hw_param_interval(params, rule->var);
+	struct snd_interval t;
+	struct snd_ratnum r = {
+		.den_min = 1,
+		.den_max = 4095,
+		.den_step = 1,
+	};
+	unsigned int num = 0, den = 0;
+	int frame_size;
+	int mck_div = 2;
+	int ret;
+
+	frame_size = snd_soc_params_to_frame_size(params);
+	if (frame_size < 0)
+		return frame_size;
+
+	switch (ssc_p->daifmt & SND_SOC_DAIFMT_MASTER_MASK) {
+	case SND_SOC_DAIFMT_CBM_CFS:
+		if ((ssc_p->dir_mask & SSC_DIR_MASK_CAPTURE)
+		    && ssc->clk_from_rk_pin)
+			/* Receiver Frame Synchro (i.e. capture)
+			 * is output (format is _CFS) and the RK pin
+			 * is used for input (format is _CBM_).
+			 */
+			mck_div = 3;
+		break;
+
+	case SND_SOC_DAIFMT_CBM_CFM:
+		if ((ssc_p->dir_mask & SSC_DIR_MASK_PLAYBACK)
+		    && !ssc->clk_from_rk_pin)
+			/* Transmit Frame Synchro (i.e. playback)
+			 * is input (format is _CFM) and the TK pin
+			 * is used for input (format _CBM_ but not
+			 * using the RK pin).
+			 */
+			mck_div = 6;
+		break;
+	}
+
+	switch (ssc_p->daifmt & SND_SOC_DAIFMT_MASTER_MASK) {
+	case SND_SOC_DAIFMT_CBS_CFS:
+		r.num = ssc_p->mck_rate / mck_div / frame_size;
+
+		ret = snd_interval_ratnum(i, 1, &r, &num, &den);
+		if (ret >= 0 && den && rule->var == SNDRV_PCM_HW_PARAM_RATE) {
+			params->rate_num = num;
+			params->rate_den = den;
+		}
+		break;
+
+	case SND_SOC_DAIFMT_CBM_CFS:
+	case SND_SOC_DAIFMT_CBM_CFM:
+		t.min = 8000;
+		t.max = ssc_p->mck_rate / mck_div / frame_size;
+		t.openmin = t.openmax = 0;
+		t.integer = 0;
+		ret = snd_interval_refine(i, &t);
+		break;
+
+	default:
+		ret = -EINVAL;
+		break;
+	}
+
+	return ret;
+}
+
+/*-------------------------------------------------------------------------*\
+ * DAI functions
+\*-------------------------------------------------------------------------*/
+/*
+ * Startup.  Only that one substream allowed in each direction.
+ */
+static int atmel_ssc_startup(struct snd_pcm_substream *substream,
+			     struct snd_soc_dai *dai)
+{
+	struct platform_device *pdev = to_platform_device(dai->dev);
+	struct atmel_ssc_info *ssc_p = &ssc_info[pdev->id];
+	struct atmel_pcm_dma_params *dma_params;
+	int dir, dir_mask;
+	int ret;
+
+	pr_debug("atmel_ssc_startup: SSC_SR=0x%x\n",
+		ssc_readl(ssc_p->ssc->regs, SR));
+
+	/* Enable PMC peripheral clock for this SSC */
+	pr_debug("atmel_ssc_dai: Starting clock\n");
+	ret = clk_enable(ssc_p->ssc->clk);
+	if (ret)
+		return ret;
+
+	ssc_p->mck_rate = clk_get_rate(ssc_p->ssc->clk);
+
+	/* Reset the SSC unless initialized to keep it in a clean state */
+	if (!ssc_p->initialized)
+		ssc_writel(ssc_p->ssc->regs, CR, SSC_BIT(CR_SWRST));
+
+	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
+		dir = 0;
+		dir_mask = SSC_DIR_MASK_PLAYBACK;
+	} else {
+		dir = 1;
+		dir_mask = SSC_DIR_MASK_CAPTURE;
+	}
+
+	ret = snd_pcm_hw_rule_add(substream->runtime, 0,
+				  SNDRV_PCM_HW_PARAM_RATE,
+				  atmel_ssc_hw_rule_rate,
+				  ssc_p,
+				  SNDRV_PCM_HW_PARAM_FRAME_BITS,
+				  SNDRV_PCM_HW_PARAM_CHANNELS, -1);
+	if (ret < 0) {
+		dev_err(dai->dev, "Failed to specify rate rule: %d\n", ret);
+		return ret;
+	}
+
+	dma_params = &ssc_dma_params[pdev->id][dir];
+	dma_params->ssc = ssc_p->ssc;
+	dma_params->substream = substream;
+
+	ssc_p->dma_params[dir] = dma_params;
+
+	snd_soc_dai_set_dma_data(dai, substream, dma_params);
+
+	if (ssc_p->dir_mask & dir_mask)
+		return -EBUSY;
+
+	ssc_p->dir_mask |= dir_mask;
+
+	return 0;
+}
+
+/*
+ * Shutdown.  Clear DMA parameters and shutdown the SSC if there
+ * are no other substreams open.
+ */
+static void atmel_ssc_shutdown(struct snd_pcm_substream *substream,
+			       struct snd_soc_dai *dai)
+{
+	struct platform_device *pdev = to_platform_device(dai->dev);
+	struct atmel_ssc_info *ssc_p = &ssc_info[pdev->id];
+	struct atmel_pcm_dma_params *dma_params;
+	int dir, dir_mask;
+
+	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+		dir = 0;
+	else
+		dir = 1;
+
+	dma_params = ssc_p->dma_params[dir];
+
+	if (dma_params != NULL) {
+		dma_params->ssc = NULL;
+		dma_params->substream = NULL;
+		ssc_p->dma_params[dir] = NULL;
+	}
+
+	dir_mask = 1 << dir;
+
+	ssc_p->dir_mask &= ~dir_mask;
+	if (!ssc_p->dir_mask) {
+		if (ssc_p->initialized) {
+			free_irq(ssc_p->ssc->irq, ssc_p);
+			ssc_p->initialized = 0;
+		}
+
+		/* Reset the SSC */
+		ssc_writel(ssc_p->ssc->regs, CR, SSC_BIT(CR_SWRST));
+		/* Clear the SSC dividers */
+		ssc_p->cmr_div = ssc_p->tcmr_period = ssc_p->rcmr_period = 0;
+		ssc_p->forced_divider = 0;
+	}
+
+	/* Shutdown the SSC clock. */
+	pr_debug("atmel_ssc_dai: Stopping clock\n");
+	clk_disable(ssc_p->ssc->clk);
+}
+
+
+/*
+ * Record the DAI format for use in hw_params().
+ */
+static int atmel_ssc_set_dai_fmt(struct snd_soc_dai *cpu_dai,
+		unsigned int fmt)
+{
+	struct platform_device *pdev = to_platform_device(cpu_dai->dev);
+	struct atmel_ssc_info *ssc_p = &ssc_info[pdev->id];
+
+	ssc_p->daifmt = fmt;
+	return 0;
+}
+
+/*
+ * Record SSC clock dividers for use in hw_params().
+ */
+static int atmel_ssc_set_dai_clkdiv(struct snd_soc_dai *cpu_dai,
+	int div_id, int div)
+{
+	struct platform_device *pdev = to_platform_device(cpu_dai->dev);
+	struct atmel_ssc_info *ssc_p = &ssc_info[pdev->id];
+
+	switch (div_id) {
+	case ATMEL_SSC_CMR_DIV:
+		/*
+		 * The same master clock divider is used for both
+		 * transmit and receive, so if a value has already
+		 * been set, it must match this value.
+		 */
+		if (ssc_p->dir_mask !=
+			(SSC_DIR_MASK_PLAYBACK | SSC_DIR_MASK_CAPTURE))
+			ssc_p->cmr_div = div;
+		else if (ssc_p->cmr_div == 0)
+			ssc_p->cmr_div = div;
+		else
+			if (div != ssc_p->cmr_div)
+				return -EBUSY;
+		ssc_p->forced_divider |= BIT(ATMEL_SSC_CMR_DIV);
+		break;
+
+	case ATMEL_SSC_TCMR_PERIOD:
+		ssc_p->tcmr_period = div;
+		ssc_p->forced_divider |= BIT(ATMEL_SSC_TCMR_PERIOD);
+		break;
+
+	case ATMEL_SSC_RCMR_PERIOD:
+		ssc_p->rcmr_period = div;
+		ssc_p->forced_divider |= BIT(ATMEL_SSC_RCMR_PERIOD);
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+/* Is the cpu-dai master of the frame clock? */
+static int atmel_ssc_cfs(struct atmel_ssc_info *ssc_p)
+{
+	switch (ssc_p->daifmt & SND_SOC_DAIFMT_MASTER_MASK) {
+	case SND_SOC_DAIFMT_CBM_CFS:
+	case SND_SOC_DAIFMT_CBS_CFS:
+		return 1;
+	}
+	return 0;
+}
+
+/* Is the cpu-dai master of the bit clock? */
+static int atmel_ssc_cbs(struct atmel_ssc_info *ssc_p)
+{
+	switch (ssc_p->daifmt & SND_SOC_DAIFMT_MASTER_MASK) {
+	case SND_SOC_DAIFMT_CBS_CFM:
+	case SND_SOC_DAIFMT_CBS_CFS:
+		return 1;
+	}
+	return 0;
+}
+
+/*
+ * Configure the SSC.
+ */
+static int atmel_ssc_hw_params(struct snd_pcm_substream *substream,
+	struct snd_pcm_hw_params *params,
+	struct snd_soc_dai *dai)
+{
+	struct platform_device *pdev = to_platform_device(dai->dev);
+	int id = pdev->id;
+	struct atmel_ssc_info *ssc_p = &ssc_info[id];
+	struct ssc_device *ssc = ssc_p->ssc;
+	struct atmel_pcm_dma_params *dma_params;
+	int dir, channels, bits;
+	u32 tfmr, rfmr, tcmr, rcmr;
+	int ret;
+	int fslen, fslen_ext, fs_osync, fs_edge;
+	u32 cmr_div;
+	u32 tcmr_period;
+	u32 rcmr_period;
+
+	/*
+	 * Currently, there is only one set of dma params for
+	 * each direction.  If more are added, this code will
+	 * have to be changed to select the proper set.
+	 */
+	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+		dir = 0;
+	else
+		dir = 1;
+
+	/*
+	 * If the cpu dai should provide BCLK, but noone has provided the
+	 * divider needed for that to work, fall back to something sensible.
+	 */
+	cmr_div = ssc_p->cmr_div;
+	if (!(ssc_p->forced_divider & BIT(ATMEL_SSC_CMR_DIV)) &&
+	    atmel_ssc_cbs(ssc_p)) {
+		int bclk_rate = snd_soc_params_to_bclk(params);
+
+		if (bclk_rate < 0) {
+			dev_err(dai->dev, "unable to calculate cmr_div: %d\n",
+				bclk_rate);
+			return bclk_rate;
+		}
+
+		cmr_div = DIV_ROUND_CLOSEST(ssc_p->mck_rate, 2 * bclk_rate);
+	}
+
+	/*
+	 * If the cpu dai should provide LRCLK, but noone has provided the
+	 * dividers needed for that to work, fall back to something sensible.
+	 */
+	tcmr_period = ssc_p->tcmr_period;
+	rcmr_period = ssc_p->rcmr_period;
+	if (atmel_ssc_cfs(ssc_p)) {
+		int frame_size = snd_soc_params_to_frame_size(params);
+
+		if (frame_size < 0) {
+			dev_err(dai->dev,
+				"unable to calculate tx/rx cmr_period: %d\n",
+				frame_size);
+			return frame_size;
+		}
+
+		if (!(ssc_p->forced_divider & BIT(ATMEL_SSC_TCMR_PERIOD)))
+			tcmr_period = frame_size / 2 - 1;
+		if (!(ssc_p->forced_divider & BIT(ATMEL_SSC_RCMR_PERIOD)))
+			rcmr_period = frame_size / 2 - 1;
+	}
+
+	dma_params = ssc_p->dma_params[dir];
+
+	channels = params_channels(params);
+
+	/*
+	 * Determine sample size in bits and the PDC increment.
+	 */
+	switch (params_format(params)) {
+	case SNDRV_PCM_FORMAT_S8:
+		bits = 8;
+		dma_params->pdc_xfer_size = 1;
+		break;
+	case SNDRV_PCM_FORMAT_S16_LE:
+		bits = 16;
+		dma_params->pdc_xfer_size = 2;
+		break;
+	case SNDRV_PCM_FORMAT_S24_LE:
+		bits = 24;
+		dma_params->pdc_xfer_size = 4;
+		break;
+	case SNDRV_PCM_FORMAT_S32_LE:
+		bits = 32;
+		dma_params->pdc_xfer_size = 4;
+		break;
+	default:
+		printk(KERN_WARNING "atmel_ssc_dai: unsupported PCM format");
+		return -EINVAL;
+	}
+
+	/*
+	 * Compute SSC register settings.
+	 */
+
+	fslen_ext = (bits - 1) / 16;
+	fslen = (bits - 1) % 16;
+
+	switch (ssc_p->daifmt & SND_SOC_DAIFMT_FORMAT_MASK) {
+
+	case SND_SOC_DAIFMT_LEFT_J:
+		fs_osync = SSC_FSOS_POSITIVE;
+		fs_edge = SSC_START_RISING_RF;
+
+		rcmr =	  SSC_BF(RCMR_STTDLY, 0);
+		tcmr =	  SSC_BF(TCMR_STTDLY, 0);
+
+		break;
+
+	case SND_SOC_DAIFMT_I2S:
+		fs_osync = SSC_FSOS_NEGATIVE;
+		fs_edge = SSC_START_FALLING_RF;
+
+		rcmr =	  SSC_BF(RCMR_STTDLY, 1);
+		tcmr =	  SSC_BF(TCMR_STTDLY, 1);
+
+		break;
+
+	case SND_SOC_DAIFMT_DSP_A:
+		/*
+		 * DSP/PCM Mode A format
+		 *
+		 * Data is transferred on first BCLK after LRC pulse rising
+		 * edge.If stereo, the right channel data is contiguous with
+		 * the left channel data.
+		 */
+		fs_osync = SSC_FSOS_POSITIVE;
+		fs_edge = SSC_START_RISING_RF;
+		fslen = fslen_ext = 0;
+
+		rcmr =	  SSC_BF(RCMR_STTDLY, 1);
+		tcmr =	  SSC_BF(TCMR_STTDLY, 1);
+
+		break;
+
+	default:
+		printk(KERN_WARNING "atmel_ssc_dai: unsupported DAI format 0x%x\n",
+			ssc_p->daifmt);
+		return -EINVAL;
+	}
+
+	if (!atmel_ssc_cfs(ssc_p)) {
+		fslen = fslen_ext = 0;
+		rcmr_period = tcmr_period = 0;
+		fs_osync = SSC_FSOS_NONE;
+	}
+
+	rcmr |=	  SSC_BF(RCMR_START, fs_edge);
+	tcmr |=	  SSC_BF(TCMR_START, fs_edge);
+
+	if (atmel_ssc_cbs(ssc_p)) {
+		/*
+		 * SSC provides BCLK
+		 *
+		 * The SSC transmit and receive clocks are generated from the
+		 * MCK divider, and the BCLK signal is output
+		 * on the SSC TK line.
+		 */
+		rcmr |=	  SSC_BF(RCMR_CKS, SSC_CKS_DIV)
+			| SSC_BF(RCMR_CKO, SSC_CKO_NONE);
+
+		tcmr |=	  SSC_BF(TCMR_CKS, SSC_CKS_DIV)
+			| SSC_BF(TCMR_CKO, SSC_CKO_CONTINUOUS);
+	} else {
+		rcmr |=	  SSC_BF(RCMR_CKS, ssc->clk_from_rk_pin ?
+					SSC_CKS_PIN : SSC_CKS_CLOCK)
+			| SSC_BF(RCMR_CKO, SSC_CKO_NONE);
+
+		tcmr |=	  SSC_BF(TCMR_CKS, ssc->clk_from_rk_pin ?
+					SSC_CKS_CLOCK : SSC_CKS_PIN)
+			| SSC_BF(TCMR_CKO, SSC_CKO_NONE);
+	}
+
+	rcmr |=	  SSC_BF(RCMR_PERIOD, rcmr_period)
+		| SSC_BF(RCMR_CKI, SSC_CKI_RISING);
+
+	tcmr |=   SSC_BF(TCMR_PERIOD, tcmr_period)
+		| SSC_BF(TCMR_CKI, SSC_CKI_FALLING);
+
+	rfmr =    SSC_BF(RFMR_FSLEN_EXT, fslen_ext)
+		| SSC_BF(RFMR_FSEDGE, SSC_FSEDGE_POSITIVE)
+		| SSC_BF(RFMR_FSOS, fs_osync)
+		| SSC_BF(RFMR_FSLEN, fslen)
+		| SSC_BF(RFMR_DATNB, (channels - 1))
+		| SSC_BIT(RFMR_MSBF)
+		| SSC_BF(RFMR_LOOP, 0)
+		| SSC_BF(RFMR_DATLEN, (bits - 1));
+
+	tfmr =    SSC_BF(TFMR_FSLEN_EXT, fslen_ext)
+		| SSC_BF(TFMR_FSEDGE, SSC_FSEDGE_POSITIVE)
+		| SSC_BF(TFMR_FSDEN, 0)
+		| SSC_BF(TFMR_FSOS, fs_osync)
+		| SSC_BF(TFMR_FSLEN, fslen)
+		| SSC_BF(TFMR_DATNB, (channels - 1))
+		| SSC_BIT(TFMR_MSBF)
+		| SSC_BF(TFMR_DATDEF, 0)
+		| SSC_BF(TFMR_DATLEN, (bits - 1));
+
+	if (fslen_ext && !ssc->pdata->has_fslen_ext) {
+		dev_err(dai->dev, "sample size %d is too large for SSC device\n",
+			bits);
+		return -EINVAL;
+	}
+
+	pr_debug("atmel_ssc_hw_params: "
+			"RCMR=%08x RFMR=%08x TCMR=%08x TFMR=%08x\n",
+			rcmr, rfmr, tcmr, tfmr);
+
+	if (!ssc_p->initialized) {
+		if (!ssc_p->ssc->pdata->use_dma) {
+			ssc_writel(ssc_p->ssc->regs, PDC_RPR, 0);
+			ssc_writel(ssc_p->ssc->regs, PDC_RCR, 0);
+			ssc_writel(ssc_p->ssc->regs, PDC_RNPR, 0);
+			ssc_writel(ssc_p->ssc->regs, PDC_RNCR, 0);
+
+			ssc_writel(ssc_p->ssc->regs, PDC_TPR, 0);
+			ssc_writel(ssc_p->ssc->regs, PDC_TCR, 0);
+			ssc_writel(ssc_p->ssc->regs, PDC_TNPR, 0);
+			ssc_writel(ssc_p->ssc->regs, PDC_TNCR, 0);
+		}
+
+		ret = request_irq(ssc_p->ssc->irq, atmel_ssc_interrupt, 0,
+				ssc_p->name, ssc_p);
+		if (ret < 0) {
+			printk(KERN_WARNING
+					"atmel_ssc_dai: request_irq failure\n");
+			pr_debug("Atmel_ssc_dai: Stopping clock\n");
+			clk_disable(ssc_p->ssc->clk);
+			return ret;
+		}
+
+		ssc_p->initialized = 1;
+	}
+
+	/* set SSC clock mode register */
+	ssc_writel(ssc_p->ssc->regs, CMR, cmr_div);
+
+	/* set receive clock mode and format */
+	ssc_writel(ssc_p->ssc->regs, RCMR, rcmr);
+	ssc_writel(ssc_p->ssc->regs, RFMR, rfmr);
+
+	/* set transmit clock mode and format */
+	ssc_writel(ssc_p->ssc->regs, TCMR, tcmr);
+	ssc_writel(ssc_p->ssc->regs, TFMR, tfmr);
+
+	pr_debug("atmel_ssc_dai,hw_params: SSC initialized\n");
+	return 0;
+}
+
+
+static int atmel_ssc_prepare(struct snd_pcm_substream *substream,
+			     struct snd_soc_dai *dai)
+{
+	struct platform_device *pdev = to_platform_device(dai->dev);
+	struct atmel_ssc_info *ssc_p = &ssc_info[pdev->id];
+	struct atmel_pcm_dma_params *dma_params;
+	int dir;
+
+	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+		dir = 0;
+	else
+		dir = 1;
+
+	dma_params = ssc_p->dma_params[dir];
+
+	ssc_writel(ssc_p->ssc->regs, CR, dma_params->mask->ssc_disable);
+	ssc_writel(ssc_p->ssc->regs, IDR, dma_params->mask->ssc_error);
+
+	pr_debug("%s enabled SSC_SR=0x%08x\n",
+			dir ? "receive" : "transmit",
+			ssc_readl(ssc_p->ssc->regs, SR));
+	return 0;
+}
+
+static int atmel_ssc_trigger(struct snd_pcm_substream *substream,
+			     int cmd, struct snd_soc_dai *dai)
+{
+	struct platform_device *pdev = to_platform_device(dai->dev);
+	struct atmel_ssc_info *ssc_p = &ssc_info[pdev->id];
+	struct atmel_pcm_dma_params *dma_params;
+	int dir;
+
+	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+		dir = 0;
+	else
+		dir = 1;
+
+	dma_params = ssc_p->dma_params[dir];
+
+	switch (cmd) {
+	case SNDRV_PCM_TRIGGER_START:
+	case SNDRV_PCM_TRIGGER_RESUME:
+	case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
+		ssc_writel(ssc_p->ssc->regs, CR, dma_params->mask->ssc_enable);
+		break;
+	default:
+		ssc_writel(ssc_p->ssc->regs, CR, dma_params->mask->ssc_disable);
+		break;
+	}
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int atmel_ssc_suspend(struct snd_soc_component *component)
+{
+	struct atmel_ssc_info *ssc_p;
+	struct platform_device *pdev = to_platform_device(component->dev);
+
+	if (!snd_soc_component_active(component))
+		return 0;
+
+	ssc_p = &ssc_info[pdev->id];
+
+	/* Save the status register before disabling transmit and receive */
+	ssc_p->ssc_state.ssc_sr = ssc_readl(ssc_p->ssc->regs, SR);
+	ssc_writel(ssc_p->ssc->regs, CR, SSC_BIT(CR_TXDIS) | SSC_BIT(CR_RXDIS));
+
+	/* Save the current interrupt mask, then disable unmasked interrupts */
+	ssc_p->ssc_state.ssc_imr = ssc_readl(ssc_p->ssc->regs, IMR);
+	ssc_writel(ssc_p->ssc->regs, IDR, ssc_p->ssc_state.ssc_imr);
+
+	ssc_p->ssc_state.ssc_cmr = ssc_readl(ssc_p->ssc->regs, CMR);
+	ssc_p->ssc_state.ssc_rcmr = ssc_readl(ssc_p->ssc->regs, RCMR);
+	ssc_p->ssc_state.ssc_rfmr = ssc_readl(ssc_p->ssc->regs, RFMR);
+	ssc_p->ssc_state.ssc_tcmr = ssc_readl(ssc_p->ssc->regs, TCMR);
+	ssc_p->ssc_state.ssc_tfmr = ssc_readl(ssc_p->ssc->regs, TFMR);
+
+	return 0;
+}
+
+static int atmel_ssc_resume(struct snd_soc_component *component)
+{
+	struct atmel_ssc_info *ssc_p;
+	struct platform_device *pdev = to_platform_device(component->dev);
+	u32 cr;
+
+	if (!snd_soc_component_active(component))
+		return 0;
+
+	ssc_p = &ssc_info[pdev->id];
+
+	/* restore SSC register settings */
+	ssc_writel(ssc_p->ssc->regs, TFMR, ssc_p->ssc_state.ssc_tfmr);
+	ssc_writel(ssc_p->ssc->regs, TCMR, ssc_p->ssc_state.ssc_tcmr);
+	ssc_writel(ssc_p->ssc->regs, RFMR, ssc_p->ssc_state.ssc_rfmr);
+	ssc_writel(ssc_p->ssc->regs, RCMR, ssc_p->ssc_state.ssc_rcmr);
+	ssc_writel(ssc_p->ssc->regs, CMR, ssc_p->ssc_state.ssc_cmr);
+
+	/* re-enable interrupts */
+	ssc_writel(ssc_p->ssc->regs, IER, ssc_p->ssc_state.ssc_imr);
+
+	/* Re-enable receive and transmit as appropriate */
+	cr = 0;
+	cr |=
+	    (ssc_p->ssc_state.ssc_sr & SSC_BIT(SR_RXEN)) ? SSC_BIT(CR_RXEN) : 0;
+	cr |=
+	    (ssc_p->ssc_state.ssc_sr & SSC_BIT(SR_TXEN)) ? SSC_BIT(CR_TXEN) : 0;
+	ssc_writel(ssc_p->ssc->regs, CR, cr);
+
+	return 0;
+}
+#else /* CONFIG_PM */
+#  define atmel_ssc_suspend	NULL
+#  define atmel_ssc_resume	NULL
+#endif /* CONFIG_PM */
+
+#define ATMEL_SSC_FORMATS (SNDRV_PCM_FMTBIT_S8     | SNDRV_PCM_FMTBIT_S16_LE |\
+			  SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S32_LE)
+
+static const struct snd_soc_dai_ops atmel_ssc_dai_ops = {
+	.startup	= atmel_ssc_startup,
+	.shutdown	= atmel_ssc_shutdown,
+	.prepare	= atmel_ssc_prepare,
+	.trigger	= atmel_ssc_trigger,
+	.hw_params	= atmel_ssc_hw_params,
+	.set_fmt	= atmel_ssc_set_dai_fmt,
+	.set_clkdiv	= atmel_ssc_set_dai_clkdiv,
+};
+
+static struct snd_soc_dai_driver atmel_ssc_dai = {
+		.playback = {
+			.channels_min = 1,
+			.channels_max = 2,
+			.rates = SNDRV_PCM_RATE_CONTINUOUS,
+			.rate_min = 8000,
+			.rate_max = 384000,
+			.formats = ATMEL_SSC_FORMATS,},
+		.capture = {
+			.channels_min = 1,
+			.channels_max = 2,
+			.rates = SNDRV_PCM_RATE_CONTINUOUS,
+			.rate_min = 8000,
+			.rate_max = 384000,
+			.formats = ATMEL_SSC_FORMATS,},
+		.ops = &atmel_ssc_dai_ops,
+};
+
+static const struct snd_soc_component_driver atmel_ssc_component = {
+	.name		= "atmel-ssc",
+	.suspend	= atmel_ssc_suspend,
+	.resume		= atmel_ssc_resume,
+};
+
+static int asoc_ssc_init(struct device *dev)
+{
+	struct ssc_device *ssc = dev_get_drvdata(dev);
+	int ret;
+
+	ret = devm_snd_soc_register_component(dev, &atmel_ssc_component,
+					 &atmel_ssc_dai, 1);
+	if (ret) {
+		dev_err(dev, "Could not register DAI: %d\n", ret);
+		return ret;
+	}
+
+	if (ssc->pdata->use_dma)
+		ret = atmel_pcm_dma_platform_register(dev);
+	else
+		ret = atmel_pcm_pdc_platform_register(dev);
+
+	if (ret) {
+		dev_err(dev, "Could not register PCM: %d\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+/**
+ * atmel_ssc_set_audio - Allocate the specified SSC for audio use.
+ * @ssc_id: SSD ID in [0, NUM_SSC_DEVICES[
+ */
+int atmel_ssc_set_audio(int ssc_id)
+{
+	struct ssc_device *ssc;
+	int ret;
+
+	/* If we can grab the SSC briefly to parent the DAI device off it */
+	ssc = ssc_request(ssc_id);
+	if (IS_ERR(ssc)) {
+		pr_err("Unable to parent ASoC SSC DAI on SSC: %ld\n",
+			PTR_ERR(ssc));
+		return PTR_ERR(ssc);
+	} else {
+		ssc_info[ssc_id].ssc = ssc;
+	}
+
+	ret = asoc_ssc_init(&ssc->pdev->dev);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(atmel_ssc_set_audio);
+
+void atmel_ssc_put_audio(int ssc_id)
+{
+	struct ssc_device *ssc = ssc_info[ssc_id].ssc;
+
+	ssc_free(ssc);
+}
+EXPORT_SYMBOL_GPL(atmel_ssc_put_audio);
+
+/* Module information */
+MODULE_AUTHOR("Sedji Gaouaou, sedji.gaouaou@atmel.com, www.atmel.com");
+MODULE_DESCRIPTION("ATMEL SSC ASoC Interface");
+MODULE_LICENSE("GPL");