diff options
Diffstat (limited to 'sound/soc/codecs/nau8825.c')
| -rw-r--r-- | sound/soc/codecs/nau8825.c | 2669 |
1 files changed, 2669 insertions, 0 deletions
diff --git a/sound/soc/codecs/nau8825.c b/sound/soc/codecs/nau8825.c new file mode 100644 index 000000000..f0cba7b57 --- /dev/null +++ b/sound/soc/codecs/nau8825.c @@ -0,0 +1,2669 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Nuvoton NAU8825 audio codec driver + * + * Copyright 2015 Google Chromium project. + * Author: Anatol Pomozov <anatol@chromium.org> + * Copyright 2015 Nuvoton Technology Corp. + * Co-author: Meng-Huang Kuo <mhkuo@nuvoton.com> + */ + +#include <linux/module.h> +#include <linux/delay.h> +#include <linux/init.h> +#include <linux/i2c.h> +#include <linux/regmap.h> +#include <linux/slab.h> +#include <linux/clk.h> +#include <linux/acpi.h> +#include <linux/math64.h> +#include <linux/semaphore.h> + +#include <sound/initval.h> +#include <sound/tlv.h> +#include <sound/core.h> +#include <sound/pcm.h> +#include <sound/pcm_params.h> +#include <sound/soc.h> +#include <sound/jack.h> + + +#include "nau8825.h" + + +#define NUVOTON_CODEC_DAI "nau8825-hifi" + +#define NAU_FREF_MAX 13500000 +#define NAU_FVCO_MAX 124000000 +#define NAU_FVCO_MIN 90000000 + +/* cross talk suppression detection */ +#define LOG10_MAGIC 646456993 +#define GAIN_AUGMENT 22500 +#define SIDETONE_BASE 207000 + +/* the maximum frequency of CLK_ADC and CLK_DAC */ +#define CLK_DA_AD_MAX 6144000 + +static int nau8825_configure_sysclk(struct nau8825 *nau8825, + int clk_id, unsigned int freq); + +struct nau8825_fll { + int mclk_src; + int ratio; + int fll_frac; + int fll_int; + int clk_ref_div; +}; + +struct nau8825_fll_attr { + unsigned int param; + unsigned int val; +}; + +/* scaling for mclk from sysclk_src output */ +static const struct nau8825_fll_attr mclk_src_scaling[] = { + { 1, 0x0 }, + { 2, 0x2 }, + { 4, 0x3 }, + { 8, 0x4 }, + { 16, 0x5 }, + { 32, 0x6 }, + { 3, 0x7 }, + { 6, 0xa }, + { 12, 0xb }, + { 24, 0xc }, + { 48, 0xd }, + { 96, 0xe }, + { 5, 0xf }, +}; + +/* ratio for input clk freq */ +static const struct nau8825_fll_attr fll_ratio[] = { + { 512000, 0x01 }, + { 256000, 0x02 }, + { 128000, 0x04 }, + { 64000, 0x08 }, + { 32000, 0x10 }, + { 8000, 0x20 }, + { 4000, 0x40 }, +}; + +static const struct nau8825_fll_attr fll_pre_scalar[] = { + { 1, 0x0 }, + { 2, 0x1 }, + { 4, 0x2 }, + { 8, 0x3 }, +}; + +/* over sampling rate */ +struct nau8825_osr_attr { + unsigned int osr; + unsigned int clk_src; +}; + +static const struct nau8825_osr_attr osr_dac_sel[] = { + { 64, 2 }, /* OSR 64, SRC 1/4 */ + { 256, 0 }, /* OSR 256, SRC 1 */ + { 128, 1 }, /* OSR 128, SRC 1/2 */ + { 0, 0 }, + { 32, 3 }, /* OSR 32, SRC 1/8 */ +}; + +static const struct nau8825_osr_attr osr_adc_sel[] = { + { 32, 3 }, /* OSR 32, SRC 1/8 */ + { 64, 2 }, /* OSR 64, SRC 1/4 */ + { 128, 1 }, /* OSR 128, SRC 1/2 */ + { 256, 0 }, /* OSR 256, SRC 1 */ +}; + +static const struct reg_default nau8825_reg_defaults[] = { + { NAU8825_REG_ENA_CTRL, 0x00ff }, + { NAU8825_REG_IIC_ADDR_SET, 0x0 }, + { NAU8825_REG_CLK_DIVIDER, 0x0050 }, + { NAU8825_REG_FLL1, 0x0 }, + { NAU8825_REG_FLL2, 0x3126 }, + { NAU8825_REG_FLL3, 0x0008 }, + { NAU8825_REG_FLL4, 0x0010 }, + { NAU8825_REG_FLL5, 0x0 }, + { NAU8825_REG_FLL6, 0x6000 }, + { NAU8825_REG_FLL_VCO_RSV, 0xf13c }, + { NAU8825_REG_HSD_CTRL, 0x000c }, + { NAU8825_REG_JACK_DET_CTRL, 0x0 }, + { NAU8825_REG_INTERRUPT_MASK, 0x0 }, + { NAU8825_REG_INTERRUPT_DIS_CTRL, 0xffff }, + { NAU8825_REG_SAR_CTRL, 0x0015 }, + { NAU8825_REG_KEYDET_CTRL, 0x0110 }, + { NAU8825_REG_VDET_THRESHOLD_1, 0x0 }, + { NAU8825_REG_VDET_THRESHOLD_2, 0x0 }, + { NAU8825_REG_VDET_THRESHOLD_3, 0x0 }, + { NAU8825_REG_VDET_THRESHOLD_4, 0x0 }, + { NAU8825_REG_GPIO34_CTRL, 0x0 }, + { NAU8825_REG_GPIO12_CTRL, 0x0 }, + { NAU8825_REG_TDM_CTRL, 0x0 }, + { NAU8825_REG_I2S_PCM_CTRL1, 0x000b }, + { NAU8825_REG_I2S_PCM_CTRL2, 0x8010 }, + { NAU8825_REG_LEFT_TIME_SLOT, 0x0 }, + { NAU8825_REG_RIGHT_TIME_SLOT, 0x0 }, + { NAU8825_REG_BIQ_CTRL, 0x0 }, + { NAU8825_REG_BIQ_COF1, 0x0 }, + { NAU8825_REG_BIQ_COF2, 0x0 }, + { NAU8825_REG_BIQ_COF3, 0x0 }, + { NAU8825_REG_BIQ_COF4, 0x0 }, + { NAU8825_REG_BIQ_COF5, 0x0 }, + { NAU8825_REG_BIQ_COF6, 0x0 }, + { NAU8825_REG_BIQ_COF7, 0x0 }, + { NAU8825_REG_BIQ_COF8, 0x0 }, + { NAU8825_REG_BIQ_COF9, 0x0 }, + { NAU8825_REG_BIQ_COF10, 0x0 }, + { NAU8825_REG_ADC_RATE, 0x0010 }, + { NAU8825_REG_DAC_CTRL1, 0x0001 }, + { NAU8825_REG_DAC_CTRL2, 0x0 }, + { NAU8825_REG_DAC_DGAIN_CTRL, 0x0 }, + { NAU8825_REG_ADC_DGAIN_CTRL, 0x00cf }, + { NAU8825_REG_MUTE_CTRL, 0x0 }, + { NAU8825_REG_HSVOL_CTRL, 0x0 }, + { NAU8825_REG_DACL_CTRL, 0x02cf }, + { NAU8825_REG_DACR_CTRL, 0x00cf }, + { NAU8825_REG_ADC_DRC_KNEE_IP12, 0x1486 }, + { NAU8825_REG_ADC_DRC_KNEE_IP34, 0x0f12 }, + { NAU8825_REG_ADC_DRC_SLOPES, 0x25ff }, + { NAU8825_REG_ADC_DRC_ATKDCY, 0x3457 }, + { NAU8825_REG_DAC_DRC_KNEE_IP12, 0x1486 }, + { NAU8825_REG_DAC_DRC_KNEE_IP34, 0x0f12 }, + { NAU8825_REG_DAC_DRC_SLOPES, 0x25f9 }, + { NAU8825_REG_DAC_DRC_ATKDCY, 0x3457 }, + { NAU8825_REG_IMM_MODE_CTRL, 0x0 }, + { NAU8825_REG_CLASSG_CTRL, 0x0 }, + { NAU8825_REG_OPT_EFUSE_CTRL, 0x0 }, + { NAU8825_REG_MISC_CTRL, 0x0 }, + { NAU8825_REG_BIAS_ADJ, 0x0 }, + { NAU8825_REG_TRIM_SETTINGS, 0x0 }, + { NAU8825_REG_ANALOG_CONTROL_1, 0x0 }, + { NAU8825_REG_ANALOG_CONTROL_2, 0x0 }, + { NAU8825_REG_ANALOG_ADC_1, 0x0011 }, + { NAU8825_REG_ANALOG_ADC_2, 0x0020 }, + { NAU8825_REG_RDAC, 0x0008 }, + { NAU8825_REG_MIC_BIAS, 0x0006 }, + { NAU8825_REG_BOOST, 0x0 }, + { NAU8825_REG_FEPGA, 0x0 }, + { NAU8825_REG_POWER_UP_CONTROL, 0x0 }, + { NAU8825_REG_CHARGE_PUMP, 0x0 }, +}; + +/* register backup table when cross talk detection */ +static struct reg_default nau8825_xtalk_baktab[] = { + { NAU8825_REG_ADC_DGAIN_CTRL, 0x00cf }, + { NAU8825_REG_HSVOL_CTRL, 0 }, + { NAU8825_REG_DACL_CTRL, 0x00cf }, + { NAU8825_REG_DACR_CTRL, 0x02cf }, +}; + +static const unsigned short logtable[256] = { + 0x0000, 0x0171, 0x02e0, 0x044e, 0x05ba, 0x0725, 0x088e, 0x09f7, + 0x0b5d, 0x0cc3, 0x0e27, 0x0f8a, 0x10eb, 0x124b, 0x13aa, 0x1508, + 0x1664, 0x17bf, 0x1919, 0x1a71, 0x1bc8, 0x1d1e, 0x1e73, 0x1fc6, + 0x2119, 0x226a, 0x23ba, 0x2508, 0x2656, 0x27a2, 0x28ed, 0x2a37, + 0x2b80, 0x2cc8, 0x2e0f, 0x2f54, 0x3098, 0x31dc, 0x331e, 0x345f, + 0x359f, 0x36de, 0x381b, 0x3958, 0x3a94, 0x3bce, 0x3d08, 0x3e41, + 0x3f78, 0x40af, 0x41e4, 0x4319, 0x444c, 0x457f, 0x46b0, 0x47e1, + 0x4910, 0x4a3f, 0x4b6c, 0x4c99, 0x4dc5, 0x4eef, 0x5019, 0x5142, + 0x526a, 0x5391, 0x54b7, 0x55dc, 0x5700, 0x5824, 0x5946, 0x5a68, + 0x5b89, 0x5ca8, 0x5dc7, 0x5ee5, 0x6003, 0x611f, 0x623a, 0x6355, + 0x646f, 0x6588, 0x66a0, 0x67b7, 0x68ce, 0x69e4, 0x6af8, 0x6c0c, + 0x6d20, 0x6e32, 0x6f44, 0x7055, 0x7165, 0x7274, 0x7383, 0x7490, + 0x759d, 0x76aa, 0x77b5, 0x78c0, 0x79ca, 0x7ad3, 0x7bdb, 0x7ce3, + 0x7dea, 0x7ef0, 0x7ff6, 0x80fb, 0x81ff, 0x8302, 0x8405, 0x8507, + 0x8608, 0x8709, 0x8809, 0x8908, 0x8a06, 0x8b04, 0x8c01, 0x8cfe, + 0x8dfa, 0x8ef5, 0x8fef, 0x90e9, 0x91e2, 0x92db, 0x93d2, 0x94ca, + 0x95c0, 0x96b6, 0x97ab, 0x98a0, 0x9994, 0x9a87, 0x9b7a, 0x9c6c, + 0x9d5e, 0x9e4f, 0x9f3f, 0xa02e, 0xa11e, 0xa20c, 0xa2fa, 0xa3e7, + 0xa4d4, 0xa5c0, 0xa6ab, 0xa796, 0xa881, 0xa96a, 0xaa53, 0xab3c, + 0xac24, 0xad0c, 0xadf2, 0xaed9, 0xafbe, 0xb0a4, 0xb188, 0xb26c, + 0xb350, 0xb433, 0xb515, 0xb5f7, 0xb6d9, 0xb7ba, 0xb89a, 0xb97a, + 0xba59, 0xbb38, 0xbc16, 0xbcf4, 0xbdd1, 0xbead, 0xbf8a, 0xc065, + 0xc140, 0xc21b, 0xc2f5, 0xc3cf, 0xc4a8, 0xc580, 0xc658, 0xc730, + 0xc807, 0xc8de, 0xc9b4, 0xca8a, 0xcb5f, 0xcc34, 0xcd08, 0xcddc, + 0xceaf, 0xcf82, 0xd054, 0xd126, 0xd1f7, 0xd2c8, 0xd399, 0xd469, + 0xd538, 0xd607, 0xd6d6, 0xd7a4, 0xd872, 0xd93f, 0xda0c, 0xdad9, + 0xdba5, 0xdc70, 0xdd3b, 0xde06, 0xded0, 0xdf9a, 0xe063, 0xe12c, + 0xe1f5, 0xe2bd, 0xe385, 0xe44c, 0xe513, 0xe5d9, 0xe69f, 0xe765, + 0xe82a, 0xe8ef, 0xe9b3, 0xea77, 0xeb3b, 0xebfe, 0xecc1, 0xed83, + 0xee45, 0xef06, 0xefc8, 0xf088, 0xf149, 0xf209, 0xf2c8, 0xf387, + 0xf446, 0xf505, 0xf5c3, 0xf680, 0xf73e, 0xf7fb, 0xf8b7, 0xf973, + 0xfa2f, 0xfaea, 0xfba5, 0xfc60, 0xfd1a, 0xfdd4, 0xfe8e, 0xff47 +}; + +/** + * nau8825_sema_acquire - acquire the semaphore of nau88l25 + * @nau8825: component to register the codec private data with + * @timeout: how long in jiffies to wait before failure or zero to wait + * until release + * + * Attempts to acquire the semaphore with number of jiffies. If no more + * tasks are allowed to acquire the semaphore, calling this function will + * put the task to sleep. If the semaphore is not released within the + * specified number of jiffies, this function returns. + * If the semaphore is not released within the specified number of jiffies, + * this function returns -ETIME. If the sleep is interrupted by a signal, + * this function will return -EINTR. It returns 0 if the semaphore was + * acquired successfully. + * + * Acquires the semaphore without jiffies. Try to acquire the semaphore + * atomically. Returns 0 if the semaphore has been acquired successfully + * or 1 if it cannot be acquired. + */ +static int nau8825_sema_acquire(struct nau8825 *nau8825, long timeout) +{ + int ret; + + if (timeout) { + ret = down_timeout(&nau8825->xtalk_sem, timeout); + if (ret < 0) + dev_warn(nau8825->dev, "Acquire semaphore timeout\n"); + } else { + ret = down_trylock(&nau8825->xtalk_sem); + if (ret) + dev_warn(nau8825->dev, "Acquire semaphore fail\n"); + } + + return ret; +} + +/** + * nau8825_sema_release - release the semaphore of nau88l25 + * @nau8825: component to register the codec private data with + * + * Release the semaphore which may be called from any context and + * even by tasks which have never called down(). + */ +static inline void nau8825_sema_release(struct nau8825 *nau8825) +{ + up(&nau8825->xtalk_sem); +} + +/** + * nau8825_sema_reset - reset the semaphore for nau88l25 + * @nau8825: component to register the codec private data with + * + * Reset the counter of the semaphore. Call this function to restart + * a new round task management. + */ +static inline void nau8825_sema_reset(struct nau8825 *nau8825) +{ + nau8825->xtalk_sem.count = 1; +} + +/** + * Ramp up the headphone volume change gradually to target level. + * + * @nau8825: component to register the codec private data with + * @vol_from: the volume to start up + * @vol_to: the target volume + * @step: the volume span to move on + * + * The headphone volume is from 0dB to minimum -54dB and -1dB per step. + * If the volume changes sharp, there is a pop noise heard in headphone. We + * provide the function to ramp up the volume up or down by delaying 10ms + * per step. + */ +static void nau8825_hpvol_ramp(struct nau8825 *nau8825, + unsigned int vol_from, unsigned int vol_to, unsigned int step) +{ + unsigned int value, volume, ramp_up, from, to; + + if (vol_from == vol_to || step == 0) { + return; + } else if (vol_from < vol_to) { + ramp_up = true; + from = vol_from; + to = vol_to; + } else { + ramp_up = false; + from = vol_to; + to = vol_from; + } + /* only handle volume from 0dB to minimum -54dB */ + if (to > NAU8825_HP_VOL_MIN) + to = NAU8825_HP_VOL_MIN; + + for (volume = from; volume < to; volume += step) { + if (ramp_up) + value = volume; + else + value = to - volume + from; + regmap_update_bits(nau8825->regmap, NAU8825_REG_HSVOL_CTRL, + NAU8825_HPL_VOL_MASK | NAU8825_HPR_VOL_MASK, + (value << NAU8825_HPL_VOL_SFT) | value); + usleep_range(10000, 10500); + } + if (ramp_up) + value = to; + else + value = from; + regmap_update_bits(nau8825->regmap, NAU8825_REG_HSVOL_CTRL, + NAU8825_HPL_VOL_MASK | NAU8825_HPR_VOL_MASK, + (value << NAU8825_HPL_VOL_SFT) | value); +} + +/** + * Computes log10 of a value; the result is round off to 3 decimal. This func- + * tion takes reference to dvb-math. The source code locates as the following. + * Linux/drivers/media/dvb-core/dvb_math.c + * @value: input for log10 + * + * return log10(value) * 1000 + */ +static u32 nau8825_intlog10_dec3(u32 value) +{ + u32 msb, logentry, significand, interpolation, log10val; + u64 log2val; + + /* first detect the msb (count begins at 0) */ + msb = fls(value) - 1; + /** + * now we use a logtable after the following method: + * + * log2(2^x * y) * 2^24 = x * 2^24 + log2(y) * 2^24 + * where x = msb and therefore 1 <= y < 2 + * first y is determined by shifting the value left + * so that msb is bit 31 + * 0x00231f56 -> 0x8C7D5800 + * the result is y * 2^31 -> "significand" + * then the highest 9 bits are used for a table lookup + * the highest bit is discarded because it's always set + * the highest nine bits in our example are 100011000 + * so we would use the entry 0x18 + */ + significand = value << (31 - msb); + logentry = (significand >> 23) & 0xff; + /** + * last step we do is interpolation because of the + * limitations of the log table the error is that part of + * the significand which isn't used for lookup then we + * compute the ratio between the error and the next table entry + * and interpolate it between the log table entry used and the + * next one the biggest error possible is 0x7fffff + * (in our example it's 0x7D5800) + * needed value for next table entry is 0x800000 + * so the interpolation is + * (error / 0x800000) * (logtable_next - logtable_current) + * in the implementation the division is moved to the end for + * better accuracy there is also an overflow correction if + * logtable_next is 256 + */ + interpolation = ((significand & 0x7fffff) * + ((logtable[(logentry + 1) & 0xff] - + logtable[logentry]) & 0xffff)) >> 15; + + log2val = ((msb << 24) + (logtable[logentry] << 8) + interpolation); + /** + * log10(x) = log2(x) * log10(2) + */ + log10val = (log2val * LOG10_MAGIC) >> 31; + /** + * the result is round off to 3 decimal + */ + return log10val / ((1 << 24) / 1000); +} + +/** + * computes cross talk suppression sidetone gain. + * + * @sig_org: orignal signal level + * @sig_cros: cross talk signal level + * + * The orignal and cross talk signal vlues need to be characterized. + * Once these values have been characterized, this sidetone value + * can be converted to decibel with the equation below. + * sidetone = 20 * log (original signal level / crosstalk signal level) + * + * return cross talk sidetone gain + */ +static u32 nau8825_xtalk_sidetone(u32 sig_org, u32 sig_cros) +{ + u32 gain, sidetone; + + if (WARN_ON(sig_org == 0 || sig_cros == 0)) + return 0; + + sig_org = nau8825_intlog10_dec3(sig_org); + sig_cros = nau8825_intlog10_dec3(sig_cros); + if (sig_org >= sig_cros) + gain = (sig_org - sig_cros) * 20 + GAIN_AUGMENT; + else + gain = (sig_cros - sig_org) * 20 + GAIN_AUGMENT; + sidetone = SIDETONE_BASE - gain * 2; + sidetone /= 1000; + + return sidetone; +} + +static int nau8825_xtalk_baktab_index_by_reg(unsigned int reg) +{ + int index; + + for (index = 0; index < ARRAY_SIZE(nau8825_xtalk_baktab); index++) + if (nau8825_xtalk_baktab[index].reg == reg) + return index; + return -EINVAL; +} + +static void nau8825_xtalk_backup(struct nau8825 *nau8825) +{ + int i; + + if (nau8825->xtalk_baktab_initialized) + return; + + /* Backup some register values to backup table */ + for (i = 0; i < ARRAY_SIZE(nau8825_xtalk_baktab); i++) + regmap_read(nau8825->regmap, nau8825_xtalk_baktab[i].reg, + &nau8825_xtalk_baktab[i].def); + + nau8825->xtalk_baktab_initialized = true; +} + +static void nau8825_xtalk_restore(struct nau8825 *nau8825, bool cause_cancel) +{ + int i, volume; + + if (!nau8825->xtalk_baktab_initialized) + return; + + /* Restore register values from backup table; When the driver restores + * the headphone volume in XTALK_DONE state, it needs recover to + * original level gradually with 3dB per step for less pop noise. + * Otherwise, the restore should do ASAP. + */ + for (i = 0; i < ARRAY_SIZE(nau8825_xtalk_baktab); i++) { + if (!cause_cancel && nau8825_xtalk_baktab[i].reg == + NAU8825_REG_HSVOL_CTRL) { + /* Ramping up the volume change to reduce pop noise */ + volume = nau8825_xtalk_baktab[i].def & + NAU8825_HPR_VOL_MASK; + nau8825_hpvol_ramp(nau8825, 0, volume, 3); + continue; + } + regmap_write(nau8825->regmap, nau8825_xtalk_baktab[i].reg, + nau8825_xtalk_baktab[i].def); + } + + nau8825->xtalk_baktab_initialized = false; +} + +static void nau8825_xtalk_prepare_dac(struct nau8825 *nau8825) +{ + /* Enable power of DAC path */ + regmap_update_bits(nau8825->regmap, NAU8825_REG_ENA_CTRL, + NAU8825_ENABLE_DACR | NAU8825_ENABLE_DACL | + NAU8825_ENABLE_ADC | NAU8825_ENABLE_ADC_CLK | + NAU8825_ENABLE_DAC_CLK, NAU8825_ENABLE_DACR | + NAU8825_ENABLE_DACL | NAU8825_ENABLE_ADC | + NAU8825_ENABLE_ADC_CLK | NAU8825_ENABLE_DAC_CLK); + /* Prevent startup click by letting charge pump to ramp up and + * change bump enable + */ + regmap_update_bits(nau8825->regmap, NAU8825_REG_CHARGE_PUMP, + NAU8825_JAMNODCLOW | NAU8825_CHANRGE_PUMP_EN, + NAU8825_JAMNODCLOW | NAU8825_CHANRGE_PUMP_EN); + /* Enable clock sync of DAC and DAC clock */ + regmap_update_bits(nau8825->regmap, NAU8825_REG_RDAC, + NAU8825_RDAC_EN | NAU8825_RDAC_CLK_EN | + NAU8825_RDAC_FS_BCLK_ENB, + NAU8825_RDAC_EN | NAU8825_RDAC_CLK_EN); + /* Power up output driver with 2 stage */ + regmap_update_bits(nau8825->regmap, NAU8825_REG_POWER_UP_CONTROL, + NAU8825_POWERUP_INTEGR_R | NAU8825_POWERUP_INTEGR_L | + NAU8825_POWERUP_DRV_IN_R | NAU8825_POWERUP_DRV_IN_L, + NAU8825_POWERUP_INTEGR_R | NAU8825_POWERUP_INTEGR_L | + NAU8825_POWERUP_DRV_IN_R | NAU8825_POWERUP_DRV_IN_L); + regmap_update_bits(nau8825->regmap, NAU8825_REG_POWER_UP_CONTROL, + NAU8825_POWERUP_HP_DRV_R | NAU8825_POWERUP_HP_DRV_L, + NAU8825_POWERUP_HP_DRV_R | NAU8825_POWERUP_HP_DRV_L); + /* HP outputs not shouted to ground */ + regmap_update_bits(nau8825->regmap, NAU8825_REG_HSD_CTRL, + NAU8825_SPKR_DWN1R | NAU8825_SPKR_DWN1L, 0); + /* Enable HP boost driver */ + regmap_update_bits(nau8825->regmap, NAU8825_REG_BOOST, + NAU8825_HP_BOOST_DIS, NAU8825_HP_BOOST_DIS); + /* Enable class G compare path to supply 1.8V or 0.9V. */ + regmap_update_bits(nau8825->regmap, NAU8825_REG_CLASSG_CTRL, + NAU8825_CLASSG_LDAC_EN | NAU8825_CLASSG_RDAC_EN, + NAU8825_CLASSG_LDAC_EN | NAU8825_CLASSG_RDAC_EN); +} + +static void nau8825_xtalk_prepare_adc(struct nau8825 *nau8825) +{ + /* Power up left ADC and raise 5dB than Vmid for Vref */ + regmap_update_bits(nau8825->regmap, NAU8825_REG_ANALOG_ADC_2, + NAU8825_POWERUP_ADCL | NAU8825_ADC_VREFSEL_MASK, + NAU8825_POWERUP_ADCL | NAU8825_ADC_VREFSEL_VMID_PLUS_0_5DB); +} + +static void nau8825_xtalk_clock(struct nau8825 *nau8825) +{ + /* Recover FLL default value */ + regmap_write(nau8825->regmap, NAU8825_REG_FLL1, 0x0); + regmap_write(nau8825->regmap, NAU8825_REG_FLL2, 0x3126); + regmap_write(nau8825->regmap, NAU8825_REG_FLL3, 0x0008); + regmap_write(nau8825->regmap, NAU8825_REG_FLL4, 0x0010); + regmap_write(nau8825->regmap, NAU8825_REG_FLL5, 0x0); + regmap_write(nau8825->regmap, NAU8825_REG_FLL6, 0x6000); + /* Enable internal VCO clock for detection signal generated */ + regmap_update_bits(nau8825->regmap, NAU8825_REG_CLK_DIVIDER, + NAU8825_CLK_SRC_MASK, NAU8825_CLK_SRC_VCO); + regmap_update_bits(nau8825->regmap, NAU8825_REG_FLL6, NAU8825_DCO_EN, + NAU8825_DCO_EN); + /* Given specific clock frequency of internal clock to + * generate signal. + */ + regmap_update_bits(nau8825->regmap, NAU8825_REG_CLK_DIVIDER, + NAU8825_CLK_MCLK_SRC_MASK, 0xf); + regmap_update_bits(nau8825->regmap, NAU8825_REG_FLL1, + NAU8825_FLL_RATIO_MASK, 0x10); +} + +static void nau8825_xtalk_prepare(struct nau8825 *nau8825) +{ + int volume, index; + + /* Backup those registers changed by cross talk detection */ + nau8825_xtalk_backup(nau8825); + /* Config IIS as master to output signal by codec */ + regmap_update_bits(nau8825->regmap, NAU8825_REG_I2S_PCM_CTRL2, + NAU8825_I2S_MS_MASK | NAU8825_I2S_LRC_DIV_MASK | + NAU8825_I2S_BLK_DIV_MASK, NAU8825_I2S_MS_MASTER | + (0x2 << NAU8825_I2S_LRC_DIV_SFT) | 0x1); + /* Ramp up headphone volume to 0dB to get better performance and + * avoid pop noise in headphone. + */ + index = nau8825_xtalk_baktab_index_by_reg(NAU8825_REG_HSVOL_CTRL); + if (index != -EINVAL) { + volume = nau8825_xtalk_baktab[index].def & + NAU8825_HPR_VOL_MASK; + nau8825_hpvol_ramp(nau8825, volume, 0, 3); + } + nau8825_xtalk_clock(nau8825); + nau8825_xtalk_prepare_dac(nau8825); + nau8825_xtalk_prepare_adc(nau8825); + /* Config channel path and digital gain */ + regmap_update_bits(nau8825->regmap, NAU8825_REG_DACL_CTRL, + NAU8825_DACL_CH_SEL_MASK | NAU8825_DACL_CH_VOL_MASK, + NAU8825_DACL_CH_SEL_L | 0xab); + regmap_update_bits(nau8825->regmap, NAU8825_REG_DACR_CTRL, + NAU8825_DACR_CH_SEL_MASK | NAU8825_DACR_CH_VOL_MASK, + NAU8825_DACR_CH_SEL_R | 0xab); + /* Config cross talk parameters and generate the 23Hz sine wave with + * 1/16 full scale of signal level for impedance measurement. + */ + regmap_update_bits(nau8825->regmap, NAU8825_REG_IMM_MODE_CTRL, + NAU8825_IMM_THD_MASK | NAU8825_IMM_GEN_VOL_MASK | + NAU8825_IMM_CYC_MASK | NAU8825_IMM_DAC_SRC_MASK, + (0x9 << NAU8825_IMM_THD_SFT) | NAU8825_IMM_GEN_VOL_1_16th | + NAU8825_IMM_CYC_8192 | NAU8825_IMM_DAC_SRC_SIN); + /* RMS intrruption enable */ + regmap_update_bits(nau8825->regmap, + NAU8825_REG_INTERRUPT_MASK, NAU8825_IRQ_RMS_EN, 0); + /* Power up left and right DAC */ + regmap_update_bits(nau8825->regmap, NAU8825_REG_CHARGE_PUMP, + NAU8825_POWER_DOWN_DACR | NAU8825_POWER_DOWN_DACL, 0); +} + +static void nau8825_xtalk_clean_dac(struct nau8825 *nau8825) +{ + /* Disable HP boost driver */ + regmap_update_bits(nau8825->regmap, NAU8825_REG_BOOST, + NAU8825_HP_BOOST_DIS, 0); + /* HP outputs shouted to ground */ + regmap_update_bits(nau8825->regmap, NAU8825_REG_HSD_CTRL, + NAU8825_SPKR_DWN1R | NAU8825_SPKR_DWN1L, + NAU8825_SPKR_DWN1R | NAU8825_SPKR_DWN1L); + /* Power down left and right DAC */ + regmap_update_bits(nau8825->regmap, NAU8825_REG_CHARGE_PUMP, + NAU8825_POWER_DOWN_DACR | NAU8825_POWER_DOWN_DACL, + NAU8825_POWER_DOWN_DACR | NAU8825_POWER_DOWN_DACL); + /* Enable the TESTDAC and disable L/R HP impedance */ + regmap_update_bits(nau8825->regmap, NAU8825_REG_BIAS_ADJ, + NAU8825_BIAS_HPR_IMP | NAU8825_BIAS_HPL_IMP | + NAU8825_BIAS_TESTDAC_EN, NAU8825_BIAS_TESTDAC_EN); + /* Power down output driver with 2 stage */ + regmap_update_bits(nau8825->regmap, NAU8825_REG_POWER_UP_CONTROL, + NAU8825_POWERUP_HP_DRV_R | NAU8825_POWERUP_HP_DRV_L, 0); + regmap_update_bits(nau8825->regmap, NAU8825_REG_POWER_UP_CONTROL, + NAU8825_POWERUP_INTEGR_R | NAU8825_POWERUP_INTEGR_L | + NAU8825_POWERUP_DRV_IN_R | NAU8825_POWERUP_DRV_IN_L, 0); + /* Disable clock sync of DAC and DAC clock */ + regmap_update_bits(nau8825->regmap, NAU8825_REG_RDAC, + NAU8825_RDAC_EN | NAU8825_RDAC_CLK_EN, 0); + /* Disable charge pump ramp up function and change bump */ + regmap_update_bits(nau8825->regmap, NAU8825_REG_CHARGE_PUMP, + NAU8825_JAMNODCLOW | NAU8825_CHANRGE_PUMP_EN, 0); + /* Disable power of DAC path */ + regmap_update_bits(nau8825->regmap, NAU8825_REG_ENA_CTRL, + NAU8825_ENABLE_DACR | NAU8825_ENABLE_DACL | + NAU8825_ENABLE_ADC_CLK | NAU8825_ENABLE_DAC_CLK, 0); + if (!nau8825->irq) + regmap_update_bits(nau8825->regmap, + NAU8825_REG_ENA_CTRL, NAU8825_ENABLE_ADC, 0); +} + +static void nau8825_xtalk_clean_adc(struct nau8825 *nau8825) +{ + /* Power down left ADC and restore voltage to Vmid */ + regmap_update_bits(nau8825->regmap, NAU8825_REG_ANALOG_ADC_2, + NAU8825_POWERUP_ADCL | NAU8825_ADC_VREFSEL_MASK, 0); +} + +static void nau8825_xtalk_clean(struct nau8825 *nau8825, bool cause_cancel) +{ + /* Enable internal VCO needed for interruptions */ + nau8825_configure_sysclk(nau8825, NAU8825_CLK_INTERNAL, 0); + nau8825_xtalk_clean_dac(nau8825); + nau8825_xtalk_clean_adc(nau8825); + /* Clear cross talk parameters and disable */ + regmap_write(nau8825->regmap, NAU8825_REG_IMM_MODE_CTRL, 0); + /* RMS intrruption disable */ + regmap_update_bits(nau8825->regmap, NAU8825_REG_INTERRUPT_MASK, + NAU8825_IRQ_RMS_EN, NAU8825_IRQ_RMS_EN); + /* Recover default value for IIS */ + regmap_update_bits(nau8825->regmap, NAU8825_REG_I2S_PCM_CTRL2, + NAU8825_I2S_MS_MASK | NAU8825_I2S_LRC_DIV_MASK | + NAU8825_I2S_BLK_DIV_MASK, NAU8825_I2S_MS_SLAVE); + /* Restore value of specific register for cross talk */ + nau8825_xtalk_restore(nau8825, cause_cancel); +} + +static void nau8825_xtalk_imm_start(struct nau8825 *nau8825, int vol) +{ + /* Apply ADC volume for better cross talk performance */ + regmap_update_bits(nau8825->regmap, NAU8825_REG_ADC_DGAIN_CTRL, + NAU8825_ADC_DIG_VOL_MASK, vol); + /* Disables JKTIP(HPL) DAC channel for right to left measurement. + * Do it before sending signal in order to erase pop noise. + */ + regmap_update_bits(nau8825->regmap, NAU8825_REG_BIAS_ADJ, + NAU8825_BIAS_TESTDACR_EN | NAU8825_BIAS_TESTDACL_EN, + NAU8825_BIAS_TESTDACL_EN); + switch (nau8825->xtalk_state) { + case NAU8825_XTALK_HPR_R2L: + /* Enable right headphone impedance */ + regmap_update_bits(nau8825->regmap, NAU8825_REG_BIAS_ADJ, + NAU8825_BIAS_HPR_IMP | NAU8825_BIAS_HPL_IMP, + NAU8825_BIAS_HPR_IMP); + break; + case NAU8825_XTALK_HPL_R2L: + /* Enable left headphone impedance */ + regmap_update_bits(nau8825->regmap, NAU8825_REG_BIAS_ADJ, + NAU8825_BIAS_HPR_IMP | NAU8825_BIAS_HPL_IMP, + NAU8825_BIAS_HPL_IMP); + break; + default: + break; + } + msleep(100); + /* Impedance measurement mode enable */ + regmap_update_bits(nau8825->regmap, NAU8825_REG_IMM_MODE_CTRL, + NAU8825_IMM_EN, NAU8825_IMM_EN); +} + +static void nau8825_xtalk_imm_stop(struct nau8825 *nau8825) +{ + /* Impedance measurement mode disable */ + regmap_update_bits(nau8825->regmap, + NAU8825_REG_IMM_MODE_CTRL, NAU8825_IMM_EN, 0); +} + +/* The cross talk measurement function can reduce cross talk across the + * JKTIP(HPL) and JKR1(HPR) outputs which measures the cross talk signal + * level to determine what cross talk reduction gain is. This system works by + * sending a 23Hz -24dBV sine wave into the headset output DAC and through + * the PGA. The output of the PGA is then connected to an internal current + * sense which measures the attenuated 23Hz signal and passing the output to + * an ADC which converts the measurement to a binary code. With two separated + * measurement, one for JKR1(HPR) and the other JKTIP(HPL), measurement data + * can be separated read in IMM_RMS_L for HSR and HSL after each measurement. + * Thus, the measurement function has four states to complete whole sequence. + * 1. Prepare state : Prepare the resource for detection and transfer to HPR + * IMM stat to make JKR1(HPR) impedance measure. + * 2. HPR IMM state : Read out orignal signal level of JKR1(HPR) and transfer + * to HPL IMM state to make JKTIP(HPL) impedance measure. + * 3. HPL IMM state : Read out cross talk signal level of JKTIP(HPL) and + * transfer to IMM state to determine suppression sidetone gain. + * 4. IMM state : Computes cross talk suppression sidetone gain with orignal + * and cross talk signal level. Apply this gain and then restore codec + * configuration. Then transfer to Done state for ending. + */ +static void nau8825_xtalk_measure(struct nau8825 *nau8825) +{ + u32 sidetone; + + switch (nau8825->xtalk_state) { + case NAU8825_XTALK_PREPARE: + /* In prepare state, set up clock, intrruption, DAC path, ADC + * path and cross talk detection parameters for preparation. + */ + nau8825_xtalk_prepare(nau8825); + msleep(280); + /* Trigger right headphone impedance detection */ + nau8825->xtalk_state = NAU8825_XTALK_HPR_R2L; + nau8825_xtalk_imm_start(nau8825, 0x00d2); + break; + case NAU8825_XTALK_HPR_R2L: + /* In right headphone IMM state, read out right headphone + * impedance measure result, and then start up left side. + */ + regmap_read(nau8825->regmap, NAU8825_REG_IMM_RMS_L, + &nau8825->imp_rms[NAU8825_XTALK_HPR_R2L]); + dev_dbg(nau8825->dev, "HPR_R2L imm: %x\n", + nau8825->imp_rms[NAU8825_XTALK_HPR_R2L]); + /* Disable then re-enable IMM mode to update */ + nau8825_xtalk_imm_stop(nau8825); + /* Trigger left headphone impedance detection */ + nau8825->xtalk_state = NAU8825_XTALK_HPL_R2L; + nau8825_xtalk_imm_start(nau8825, 0x00ff); + break; + case NAU8825_XTALK_HPL_R2L: + /* In left headphone IMM state, read out left headphone + * impedance measure result, and delay some time to wait + * detection sine wave output finish. Then, we can calculate + * the cross talk suppresstion side tone according to the L/R + * headphone imedance. + */ + regmap_read(nau8825->regmap, NAU8825_REG_IMM_RMS_L, + &nau8825->imp_rms[NAU8825_XTALK_HPL_R2L]); + dev_dbg(nau8825->dev, "HPL_R2L imm: %x\n", + nau8825->imp_rms[NAU8825_XTALK_HPL_R2L]); + nau8825_xtalk_imm_stop(nau8825); + msleep(150); + nau8825->xtalk_state = NAU8825_XTALK_IMM; + break; + case NAU8825_XTALK_IMM: + /* In impedance measure state, the orignal and cross talk + * signal level vlues are ready. The side tone gain is deter- + * mined with these signal level. After all, restore codec + * configuration. + */ + sidetone = nau8825_xtalk_sidetone( + nau8825->imp_rms[NAU8825_XTALK_HPR_R2L], + nau8825->imp_rms[NAU8825_XTALK_HPL_R2L]); + dev_dbg(nau8825->dev, "cross talk sidetone: %x\n", sidetone); + regmap_write(nau8825->regmap, NAU8825_REG_DAC_DGAIN_CTRL, + (sidetone << 8) | sidetone); + nau8825_xtalk_clean(nau8825, false); + nau8825->xtalk_state = NAU8825_XTALK_DONE; + break; + default: + break; + } +} + +static void nau8825_xtalk_work(struct work_struct *work) +{ + struct nau8825 *nau8825 = container_of( + work, struct nau8825, xtalk_work); + + nau8825_xtalk_measure(nau8825); + /* To determine the cross talk side tone gain when reach + * the impedance measure state. + */ + if (nau8825->xtalk_state == NAU8825_XTALK_IMM) + nau8825_xtalk_measure(nau8825); + + /* Delay jack report until cross talk detection process + * completed. It can avoid application to do playback + * preparation before cross talk detection is still working. + * Meanwhile, the protection of the cross talk detection + * is released. + */ + if (nau8825->xtalk_state == NAU8825_XTALK_DONE) { + snd_soc_jack_report(nau8825->jack, nau8825->xtalk_event, + nau8825->xtalk_event_mask); + nau8825_sema_release(nau8825); + nau8825->xtalk_protect = false; + } +} + +static void nau8825_xtalk_cancel(struct nau8825 *nau8825) +{ + /* If the crosstalk is eanbled and the process is on going, + * the driver forces to cancel the crosstalk task and + * restores the configuration to original status. + */ + if (nau8825->xtalk_enable && nau8825->xtalk_state != + NAU8825_XTALK_DONE) { + cancel_work_sync(&nau8825->xtalk_work); + nau8825_xtalk_clean(nau8825, true); + } + /* Reset parameters for cross talk suppression function */ + nau8825_sema_reset(nau8825); + nau8825->xtalk_state = NAU8825_XTALK_DONE; + nau8825->xtalk_protect = false; +} + +static bool nau8825_readable_reg(struct device *dev, unsigned int reg) +{ + switch (reg) { + case NAU8825_REG_ENA_CTRL ... NAU8825_REG_FLL_VCO_RSV: + case NAU8825_REG_HSD_CTRL ... NAU8825_REG_JACK_DET_CTRL: + case NAU8825_REG_INTERRUPT_MASK ... NAU8825_REG_KEYDET_CTRL: + case NAU8825_REG_VDET_THRESHOLD_1 ... NAU8825_REG_DACR_CTRL: + case NAU8825_REG_ADC_DRC_KNEE_IP12 ... NAU8825_REG_ADC_DRC_ATKDCY: + case NAU8825_REG_DAC_DRC_KNEE_IP12 ... NAU8825_REG_DAC_DRC_ATKDCY: + case NAU8825_REG_IMM_MODE_CTRL ... NAU8825_REG_IMM_RMS_R: + case NAU8825_REG_CLASSG_CTRL ... NAU8825_REG_OPT_EFUSE_CTRL: + case NAU8825_REG_MISC_CTRL: + case NAU8825_REG_I2C_DEVICE_ID ... NAU8825_REG_SARDOUT_RAM_STATUS: + case NAU8825_REG_BIAS_ADJ: + case NAU8825_REG_TRIM_SETTINGS ... NAU8825_REG_ANALOG_CONTROL_2: + case NAU8825_REG_ANALOG_ADC_1 ... NAU8825_REG_MIC_BIAS: + case NAU8825_REG_BOOST ... NAU8825_REG_FEPGA: + case NAU8825_REG_POWER_UP_CONTROL ... NAU8825_REG_GENERAL_STATUS: + return true; + default: + return false; + } + +} + +static bool nau8825_writeable_reg(struct device *dev, unsigned int reg) +{ + switch (reg) { + case NAU8825_REG_RESET ... NAU8825_REG_FLL_VCO_RSV: + case NAU8825_REG_HSD_CTRL ... NAU8825_REG_JACK_DET_CTRL: + case NAU8825_REG_INTERRUPT_MASK: + case NAU8825_REG_INT_CLR_KEY_STATUS ... NAU8825_REG_KEYDET_CTRL: + case NAU8825_REG_VDET_THRESHOLD_1 ... NAU8825_REG_DACR_CTRL: + case NAU8825_REG_ADC_DRC_KNEE_IP12 ... NAU8825_REG_ADC_DRC_ATKDCY: + case NAU8825_REG_DAC_DRC_KNEE_IP12 ... NAU8825_REG_DAC_DRC_ATKDCY: + case NAU8825_REG_IMM_MODE_CTRL: + case NAU8825_REG_CLASSG_CTRL ... NAU8825_REG_OPT_EFUSE_CTRL: + case NAU8825_REG_MISC_CTRL: + case NAU8825_REG_BIAS_ADJ: + case NAU8825_REG_TRIM_SETTINGS ... NAU8825_REG_ANALOG_CONTROL_2: + case NAU8825_REG_ANALOG_ADC_1 ... NAU8825_REG_MIC_BIAS: + case NAU8825_REG_BOOST ... NAU8825_REG_FEPGA: + case NAU8825_REG_POWER_UP_CONTROL ... NAU8825_REG_CHARGE_PUMP: + return true; + default: + return false; + } +} + +static bool nau8825_volatile_reg(struct device *dev, unsigned int reg) +{ + switch (reg) { + case NAU8825_REG_RESET: + case NAU8825_REG_IRQ_STATUS: + case NAU8825_REG_INT_CLR_KEY_STATUS: + case NAU8825_REG_IMM_RMS_L: + case NAU8825_REG_IMM_RMS_R: + case NAU8825_REG_I2C_DEVICE_ID: + case NAU8825_REG_SARDOUT_RAM_STATUS: + case NAU8825_REG_CHARGE_PUMP_INPUT_READ: + case NAU8825_REG_GENERAL_STATUS: + case NAU8825_REG_BIQ_CTRL ... NAU8825_REG_BIQ_COF10: + return true; + default: + return false; + } +} + +static int nau8825_adc_event(struct snd_soc_dapm_widget *w, + struct snd_kcontrol *kcontrol, int event) +{ + struct snd_soc_component *component = snd_soc_dapm_to_component(w->dapm); + struct nau8825 *nau8825 = snd_soc_component_get_drvdata(component); + + switch (event) { + case SND_SOC_DAPM_POST_PMU: + msleep(125); + regmap_update_bits(nau8825->regmap, NAU8825_REG_ENA_CTRL, + NAU8825_ENABLE_ADC, NAU8825_ENABLE_ADC); + break; + case SND_SOC_DAPM_POST_PMD: + if (!nau8825->irq) + regmap_update_bits(nau8825->regmap, + NAU8825_REG_ENA_CTRL, NAU8825_ENABLE_ADC, 0); + break; + default: + return -EINVAL; + } + + return 0; +} + +static int nau8825_pump_event(struct snd_soc_dapm_widget *w, + struct snd_kcontrol *kcontrol, int event) +{ + struct snd_soc_component *component = snd_soc_dapm_to_component(w->dapm); + struct nau8825 *nau8825 = snd_soc_component_get_drvdata(component); + + switch (event) { + case SND_SOC_DAPM_POST_PMU: + /* Prevent startup click by letting charge pump to ramp up */ + msleep(10); + regmap_update_bits(nau8825->regmap, NAU8825_REG_CHARGE_PUMP, + NAU8825_JAMNODCLOW, NAU8825_JAMNODCLOW); + break; + case SND_SOC_DAPM_PRE_PMD: + regmap_update_bits(nau8825->regmap, NAU8825_REG_CHARGE_PUMP, + NAU8825_JAMNODCLOW, 0); + break; + default: + return -EINVAL; + } + + return 0; +} + +static int nau8825_output_dac_event(struct snd_soc_dapm_widget *w, + struct snd_kcontrol *kcontrol, int event) +{ + struct snd_soc_component *component = snd_soc_dapm_to_component(w->dapm); + struct nau8825 *nau8825 = snd_soc_component_get_drvdata(component); + + switch (event) { + case SND_SOC_DAPM_PRE_PMU: + /* Disables the TESTDAC to let DAC signal pass through. */ + regmap_update_bits(nau8825->regmap, NAU8825_REG_BIAS_ADJ, + NAU8825_BIAS_TESTDAC_EN, 0); + break; + case SND_SOC_DAPM_POST_PMD: + regmap_update_bits(nau8825->regmap, NAU8825_REG_BIAS_ADJ, + NAU8825_BIAS_TESTDAC_EN, NAU8825_BIAS_TESTDAC_EN); + break; + default: + return -EINVAL; + } + + return 0; +} + +static int nau8825_biq_coeff_get(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_component *component = snd_kcontrol_chip(kcontrol); + struct soc_bytes_ext *params = (void *)kcontrol->private_value; + + if (!component->regmap) + return -EINVAL; + + regmap_raw_read(component->regmap, NAU8825_REG_BIQ_COF1, + ucontrol->value.bytes.data, params->max); + return 0; +} + +static int nau8825_biq_coeff_put(struct snd_kcontrol *kcontrol, + struct snd_ctl_elem_value *ucontrol) +{ + struct snd_soc_component *component = snd_kcontrol_chip(kcontrol); + struct soc_bytes_ext *params = (void *)kcontrol->private_value; + void *data; + + if (!component->regmap) + return -EINVAL; + + data = kmemdup(ucontrol->value.bytes.data, + params->max, GFP_KERNEL | GFP_DMA); + if (!data) + return -ENOMEM; + + regmap_update_bits(component->regmap, NAU8825_REG_BIQ_CTRL, + NAU8825_BIQ_WRT_EN, 0); + regmap_raw_write(component->regmap, NAU8825_REG_BIQ_COF1, + data, params->max); + regmap_update_bits(component->regmap, NAU8825_REG_BIQ_CTRL, + NAU8825_BIQ_WRT_EN, NAU8825_BIQ_WRT_EN); + + kfree(data); + return 0; +} + +static const char * const nau8825_biq_path[] = { + "ADC", "DAC" +}; + +static const struct soc_enum nau8825_biq_path_enum = + SOC_ENUM_SINGLE(NAU8825_REG_BIQ_CTRL, NAU8825_BIQ_PATH_SFT, + ARRAY_SIZE(nau8825_biq_path), nau8825_biq_path); + +static const char * const nau8825_adc_decimation[] = { + "32", "64", "128", "256" +}; + +static const struct soc_enum nau8825_adc_decimation_enum = + SOC_ENUM_SINGLE(NAU8825_REG_ADC_RATE, NAU8825_ADC_SYNC_DOWN_SFT, + ARRAY_SIZE(nau8825_adc_decimation), nau8825_adc_decimation); + +static const char * const nau8825_dac_oversampl[] = { + "64", "256", "128", "", "32" +}; + +static const struct soc_enum nau8825_dac_oversampl_enum = + SOC_ENUM_SINGLE(NAU8825_REG_DAC_CTRL1, NAU8825_DAC_OVERSAMPLE_SFT, + ARRAY_SIZE(nau8825_dac_oversampl), nau8825_dac_oversampl); + +static const DECLARE_TLV_DB_MINMAX_MUTE(adc_vol_tlv, -10300, 2400); +static const DECLARE_TLV_DB_MINMAX_MUTE(sidetone_vol_tlv, -4200, 0); +static const DECLARE_TLV_DB_MINMAX(dac_vol_tlv, -5400, 0); +static const DECLARE_TLV_DB_MINMAX(fepga_gain_tlv, -100, 3600); +static const DECLARE_TLV_DB_MINMAX_MUTE(crosstalk_vol_tlv, -9600, 2400); + +static const struct snd_kcontrol_new nau8825_controls[] = { + SOC_SINGLE_TLV("Mic Volume", NAU8825_REG_ADC_DGAIN_CTRL, + 0, 0xff, 0, adc_vol_tlv), + SOC_DOUBLE_TLV("Headphone Bypass Volume", NAU8825_REG_ADC_DGAIN_CTRL, + 12, 8, 0x0f, 0, sidetone_vol_tlv), + SOC_DOUBLE_TLV("Headphone Volume", NAU8825_REG_HSVOL_CTRL, + 6, 0, 0x3f, 1, dac_vol_tlv), + SOC_SINGLE_TLV("Frontend PGA Volume", NAU8825_REG_POWER_UP_CONTROL, + 8, 37, 0, fepga_gain_tlv), + SOC_DOUBLE_TLV("Headphone Crosstalk Volume", NAU8825_REG_DAC_DGAIN_CTRL, + 0, 8, 0xff, 0, crosstalk_vol_tlv), + + SOC_ENUM("ADC Decimation Rate", nau8825_adc_decimation_enum), + SOC_ENUM("DAC Oversampling Rate", nau8825_dac_oversampl_enum), + /* programmable biquad filter */ + SOC_ENUM("BIQ Path Select", nau8825_biq_path_enum), + SND_SOC_BYTES_EXT("BIQ Coefficients", 20, + nau8825_biq_coeff_get, nau8825_biq_coeff_put), +}; + +/* DAC Mux 0x33[9] and 0x34[9] */ +static const char * const nau8825_dac_src[] = { + "DACL", "DACR", +}; + +static SOC_ENUM_SINGLE_DECL( + nau8825_dacl_enum, NAU8825_REG_DACL_CTRL, + NAU8825_DACL_CH_SEL_SFT, nau8825_dac_src); + +static SOC_ENUM_SINGLE_DECL( + nau8825_dacr_enum, NAU8825_REG_DACR_CTRL, + NAU8825_DACR_CH_SEL_SFT, nau8825_dac_src); + +static const struct snd_kcontrol_new nau8825_dacl_mux = + SOC_DAPM_ENUM("DACL Source", nau8825_dacl_enum); + +static const struct snd_kcontrol_new nau8825_dacr_mux = + SOC_DAPM_ENUM("DACR Source", nau8825_dacr_enum); + + +static const struct snd_soc_dapm_widget nau8825_dapm_widgets[] = { + SND_SOC_DAPM_AIF_OUT("AIFTX", "Capture", 0, NAU8825_REG_I2S_PCM_CTRL2, + 15, 1), + + SND_SOC_DAPM_INPUT("MIC"), + SND_SOC_DAPM_MICBIAS("MICBIAS", NAU8825_REG_MIC_BIAS, 8, 0), + + SND_SOC_DAPM_PGA("Frontend PGA", NAU8825_REG_POWER_UP_CONTROL, 14, 0, + NULL, 0), + + SND_SOC_DAPM_ADC_E("ADC", NULL, SND_SOC_NOPM, 0, 0, + nau8825_adc_event, SND_SOC_DAPM_POST_PMU | + SND_SOC_DAPM_POST_PMD), + SND_SOC_DAPM_SUPPLY("ADC Clock", NAU8825_REG_ENA_CTRL, 7, 0, NULL, 0), + SND_SOC_DAPM_SUPPLY("ADC Power", NAU8825_REG_ANALOG_ADC_2, 6, 0, NULL, + 0), + + /* ADC for button press detection. A dapm supply widget is used to + * prevent dapm_power_widgets keeping the codec at SND_SOC_BIAS_ON + * during suspend. + */ + SND_SOC_DAPM_SUPPLY("SAR", NAU8825_REG_SAR_CTRL, + NAU8825_SAR_ADC_EN_SFT, 0, NULL, 0), + + SND_SOC_DAPM_PGA_S("ADACL", 2, NAU8825_REG_RDAC, 12, 0, NULL, 0), + SND_SOC_DAPM_PGA_S("ADACR", 2, NAU8825_REG_RDAC, 13, 0, NULL, 0), + SND_SOC_DAPM_PGA_S("ADACL Clock", 3, NAU8825_REG_RDAC, 8, 0, NULL, 0), + SND_SOC_DAPM_PGA_S("ADACR Clock", 3, NAU8825_REG_RDAC, 9, 0, NULL, 0), + + SND_SOC_DAPM_DAC("DDACR", NULL, NAU8825_REG_ENA_CTRL, + NAU8825_ENABLE_DACR_SFT, 0), + SND_SOC_DAPM_DAC("DDACL", NULL, NAU8825_REG_ENA_CTRL, + NAU8825_ENABLE_DACL_SFT, 0), + SND_SOC_DAPM_SUPPLY("DDAC Clock", NAU8825_REG_ENA_CTRL, 6, 0, NULL, 0), + + SND_SOC_DAPM_MUX("DACL Mux", SND_SOC_NOPM, 0, 0, &nau8825_dacl_mux), + SND_SOC_DAPM_MUX("DACR Mux", SND_SOC_NOPM, 0, 0, &nau8825_dacr_mux), + + SND_SOC_DAPM_PGA_S("HP amp L", 0, + NAU8825_REG_CLASSG_CTRL, 1, 0, NULL, 0), + SND_SOC_DAPM_PGA_S("HP amp R", 0, + NAU8825_REG_CLASSG_CTRL, 2, 0, NULL, 0), + + SND_SOC_DAPM_PGA_S("Charge Pump", 1, NAU8825_REG_CHARGE_PUMP, 5, 0, + nau8825_pump_event, SND_SOC_DAPM_POST_PMU | + SND_SOC_DAPM_PRE_PMD), + + SND_SOC_DAPM_PGA_S("Output Driver R Stage 1", 4, + NAU8825_REG_POWER_UP_CONTROL, 5, 0, NULL, 0), + SND_SOC_DAPM_PGA_S("Output Driver L Stage 1", 4, + NAU8825_REG_POWER_UP_CONTROL, 4, 0, NULL, 0), + SND_SOC_DAPM_PGA_S("Output Driver R Stage 2", 5, + NAU8825_REG_POWER_UP_CONTROL, 3, 0, NULL, 0), + SND_SOC_DAPM_PGA_S("Output Driver L Stage 2", 5, + NAU8825_REG_POWER_UP_CONTROL, 2, 0, NULL, 0), + SND_SOC_DAPM_PGA_S("Output Driver R Stage 3", 6, + NAU8825_REG_POWER_UP_CONTROL, 1, 0, NULL, 0), + SND_SOC_DAPM_PGA_S("Output Driver L Stage 3", 6, + NAU8825_REG_POWER_UP_CONTROL, 0, 0, NULL, 0), + + SND_SOC_DAPM_PGA_S("Output DACL", 7, + NAU8825_REG_CHARGE_PUMP, 8, 1, nau8825_output_dac_event, + SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMD), + SND_SOC_DAPM_PGA_S("Output DACR", 7, + NAU8825_REG_CHARGE_PUMP, 9, 1, nau8825_output_dac_event, + SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMD), + + /* HPOL/R are ungrounded by disabling 16 Ohm pull-downs on playback */ + SND_SOC_DAPM_PGA_S("HPOL Pulldown", 8, + NAU8825_REG_HSD_CTRL, 0, 1, NULL, 0), + SND_SOC_DAPM_PGA_S("HPOR Pulldown", 8, + NAU8825_REG_HSD_CTRL, 1, 1, NULL, 0), + + /* High current HPOL/R boost driver */ + SND_SOC_DAPM_PGA_S("HP Boost Driver", 9, + NAU8825_REG_BOOST, 9, 1, NULL, 0), + + /* Class G operation control*/ + SND_SOC_DAPM_PGA_S("Class G", 10, + NAU8825_REG_CLASSG_CTRL, 0, 0, NULL, 0), + + SND_SOC_DAPM_OUTPUT("HPOL"), + SND_SOC_DAPM_OUTPUT("HPOR"), +}; + +static const struct snd_soc_dapm_route nau8825_dapm_routes[] = { + {"Frontend PGA", NULL, "MIC"}, + {"ADC", NULL, "Frontend PGA"}, + {"ADC", NULL, "ADC Clock"}, + {"ADC", NULL, "ADC Power"}, + {"AIFTX", NULL, "ADC"}, + + {"DDACL", NULL, "Playback"}, + {"DDACR", NULL, "Playback"}, + {"DDACL", NULL, "DDAC Clock"}, + {"DDACR", NULL, "DDAC Clock"}, + {"DACL Mux", "DACL", "DDACL"}, + {"DACL Mux", "DACR", "DDACR"}, + {"DACR Mux", "DACL", "DDACL"}, + {"DACR Mux", "DACR", "DDACR"}, + {"HP amp L", NULL, "DACL Mux"}, + {"HP amp R", NULL, "DACR Mux"}, + {"Charge Pump", NULL, "HP amp L"}, + {"Charge Pump", NULL, "HP amp R"}, + {"ADACL", NULL, "Charge Pump"}, + {"ADACR", NULL, "Charge Pump"}, + {"ADACL Clock", NULL, "ADACL"}, + {"ADACR Clock", NULL, "ADACR"}, + {"Output Driver L Stage 1", NULL, "ADACL Clock"}, + {"Output Driver R Stage 1", NULL, "ADACR Clock"}, + {"Output Driver L Stage 2", NULL, "Output Driver L Stage 1"}, + {"Output Driver R Stage 2", NULL, "Output Driver R Stage 1"}, + {"Output Driver L Stage 3", NULL, "Output Driver L Stage 2"}, + {"Output Driver R Stage 3", NULL, "Output Driver R Stage 2"}, + {"Output DACL", NULL, "Output Driver L Stage 3"}, + {"Output DACR", NULL, "Output Driver R Stage 3"}, + {"HPOL Pulldown", NULL, "Output DACL"}, + {"HPOR Pulldown", NULL, "Output DACR"}, + {"HP Boost Driver", NULL, "HPOL Pulldown"}, + {"HP Boost Driver", NULL, "HPOR Pulldown"}, + {"Class G", NULL, "HP Boost Driver"}, + {"HPOL", NULL, "Class G"}, + {"HPOR", NULL, "Class G"}, +}; + +static int nau8825_clock_check(struct nau8825 *nau8825, + int stream, int rate, int osr) +{ + int osrate; + + if (stream == SNDRV_PCM_STREAM_PLAYBACK) { + if (osr >= ARRAY_SIZE(osr_dac_sel)) + return -EINVAL; + osrate = osr_dac_sel[osr].osr; + } else { + if (osr >= ARRAY_SIZE(osr_adc_sel)) + return -EINVAL; + osrate = osr_adc_sel[osr].osr; + } + + if (!osrate || rate * osr > CLK_DA_AD_MAX) { + dev_err(nau8825->dev, "exceed the maximum frequency of CLK_ADC or CLK_DAC\n"); + return -EINVAL; + } + + return 0; +} + +static int nau8825_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params, + struct snd_soc_dai *dai) +{ + struct snd_soc_component *component = dai->component; + struct nau8825 *nau8825 = snd_soc_component_get_drvdata(component); + unsigned int val_len = 0, osr, ctrl_val, bclk_fs, bclk_div; + + nau8825_sema_acquire(nau8825, 3 * HZ); + + /* CLK_DAC or CLK_ADC = OSR * FS + * DAC or ADC clock frequency is defined as Over Sampling Rate (OSR) + * multiplied by the audio sample rate (Fs). Note that the OSR and Fs + * values must be selected such that the maximum frequency is less + * than 6.144 MHz. + */ + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) { + regmap_read(nau8825->regmap, NAU8825_REG_DAC_CTRL1, &osr); + osr &= NAU8825_DAC_OVERSAMPLE_MASK; + if (nau8825_clock_check(nau8825, substream->stream, + params_rate(params), osr)) { + nau8825_sema_release(nau8825); + return -EINVAL; + } + regmap_update_bits(nau8825->regmap, NAU8825_REG_CLK_DIVIDER, + NAU8825_CLK_DAC_SRC_MASK, + osr_dac_sel[osr].clk_src << NAU8825_CLK_DAC_SRC_SFT); + } else { + regmap_read(nau8825->regmap, NAU8825_REG_ADC_RATE, &osr); + osr &= NAU8825_ADC_SYNC_DOWN_MASK; + if (nau8825_clock_check(nau8825, substream->stream, + params_rate(params), osr)) { + nau8825_sema_release(nau8825); + return -EINVAL; + } + regmap_update_bits(nau8825->regmap, NAU8825_REG_CLK_DIVIDER, + NAU8825_CLK_ADC_SRC_MASK, + osr_adc_sel[osr].clk_src << NAU8825_CLK_ADC_SRC_SFT); + } + + /* make BCLK and LRC divde configuration if the codec as master. */ + regmap_read(nau8825->regmap, NAU8825_REG_I2S_PCM_CTRL2, &ctrl_val); + if (ctrl_val & NAU8825_I2S_MS_MASTER) { + /* get the bclk and fs ratio */ + bclk_fs = snd_soc_params_to_bclk(params) / params_rate(params); + if (bclk_fs <= 32) + bclk_div = 2; + else if (bclk_fs <= 64) + bclk_div = 1; + else if (bclk_fs <= 128) + bclk_div = 0; + else { + nau8825_sema_release(nau8825); + return -EINVAL; + } + regmap_update_bits(nau8825->regmap, NAU8825_REG_I2S_PCM_CTRL2, + NAU8825_I2S_LRC_DIV_MASK | NAU8825_I2S_BLK_DIV_MASK, + ((bclk_div + 1) << NAU8825_I2S_LRC_DIV_SFT) | bclk_div); + } + + switch (params_width(params)) { + case 16: + val_len |= NAU8825_I2S_DL_16; + break; + case 20: + val_len |= NAU8825_I2S_DL_20; + break; + case 24: + val_len |= NAU8825_I2S_DL_24; + break; + case 32: + val_len |= NAU8825_I2S_DL_32; + break; + default: + nau8825_sema_release(nau8825); + return -EINVAL; + } + + regmap_update_bits(nau8825->regmap, NAU8825_REG_I2S_PCM_CTRL1, + NAU8825_I2S_DL_MASK, val_len); + + /* Release the semaphore. */ + nau8825_sema_release(nau8825); + + return 0; +} + +static int nau8825_set_dai_fmt(struct snd_soc_dai *codec_dai, unsigned int fmt) +{ + struct snd_soc_component *component = codec_dai->component; + struct nau8825 *nau8825 = snd_soc_component_get_drvdata(component); + unsigned int ctrl1_val = 0, ctrl2_val = 0; + + switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) { + case SND_SOC_DAIFMT_CBM_CFM: + ctrl2_val |= NAU8825_I2S_MS_MASTER; + break; + case SND_SOC_DAIFMT_CBS_CFS: + break; + default: + return -EINVAL; + } + + switch (fmt & SND_SOC_DAIFMT_INV_MASK) { + case SND_SOC_DAIFMT_NB_NF: + break; + case SND_SOC_DAIFMT_IB_NF: + ctrl1_val |= NAU8825_I2S_BP_INV; + break; + default: + return -EINVAL; + } + + switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) { + case SND_SOC_DAIFMT_I2S: + ctrl1_val |= NAU8825_I2S_DF_I2S; + break; + case SND_SOC_DAIFMT_LEFT_J: + ctrl1_val |= NAU8825_I2S_DF_LEFT; + break; + case SND_SOC_DAIFMT_RIGHT_J: + ctrl1_val |= NAU8825_I2S_DF_RIGTH; + break; + case SND_SOC_DAIFMT_DSP_A: + ctrl1_val |= NAU8825_I2S_DF_PCM_AB; + break; + case SND_SOC_DAIFMT_DSP_B: + ctrl1_val |= NAU8825_I2S_DF_PCM_AB; + ctrl1_val |= NAU8825_I2S_PCMB_EN; + break; + default: + return -EINVAL; + } + + nau8825_sema_acquire(nau8825, 3 * HZ); + + regmap_update_bits(nau8825->regmap, NAU8825_REG_I2S_PCM_CTRL1, + NAU8825_I2S_DL_MASK | NAU8825_I2S_DF_MASK | + NAU8825_I2S_BP_MASK | NAU8825_I2S_PCMB_MASK, + ctrl1_val); + regmap_update_bits(nau8825->regmap, NAU8825_REG_I2S_PCM_CTRL2, + NAU8825_I2S_MS_MASK, ctrl2_val); + + /* Release the semaphore. */ + nau8825_sema_release(nau8825); + + return 0; +} + +static const struct snd_soc_dai_ops nau8825_dai_ops = { + .hw_params = nau8825_hw_params, + .set_fmt = nau8825_set_dai_fmt, +}; + +#define NAU8825_RATES SNDRV_PCM_RATE_8000_192000 +#define NAU8825_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S20_3LE \ + | SNDRV_PCM_FMTBIT_S24_3LE | SNDRV_PCM_FMTBIT_S32_LE) + +static struct snd_soc_dai_driver nau8825_dai = { + .name = "nau8825-hifi", + .playback = { + .stream_name = "Playback", + .channels_min = 1, + .channels_max = 2, + .rates = NAU8825_RATES, + .formats = NAU8825_FORMATS, + }, + .capture = { + .stream_name = "Capture", + .channels_min = 1, + .channels_max = 1, + .rates = NAU8825_RATES, + .formats = NAU8825_FORMATS, + }, + .ops = &nau8825_dai_ops, +}; + +/** + * nau8825_enable_jack_detect - Specify a jack for event reporting + * + * @component: component to register the jack with + * @jack: jack to use to report headset and button events on + * + * After this function has been called the headset insert/remove and button + * events will be routed to the given jack. Jack can be null to stop + * reporting. + */ +int nau8825_enable_jack_detect(struct snd_soc_component *component, + struct snd_soc_jack *jack) +{ + struct nau8825 *nau8825 = snd_soc_component_get_drvdata(component); + struct regmap *regmap = nau8825->regmap; + + nau8825->jack = jack; + + /* Ground HP Outputs[1:0], needed for headset auto detection + * Enable Automatic Mic/Gnd switching reading on insert interrupt[6] + */ + regmap_update_bits(regmap, NAU8825_REG_HSD_CTRL, + NAU8825_HSD_AUTO_MODE | NAU8825_SPKR_DWN1R | NAU8825_SPKR_DWN1L, + NAU8825_HSD_AUTO_MODE | NAU8825_SPKR_DWN1R | NAU8825_SPKR_DWN1L); + + return 0; +} +EXPORT_SYMBOL_GPL(nau8825_enable_jack_detect); + + +static bool nau8825_is_jack_inserted(struct regmap *regmap) +{ + bool active_high, is_high; + int status, jkdet; + + regmap_read(regmap, NAU8825_REG_JACK_DET_CTRL, &jkdet); + active_high = jkdet & NAU8825_JACK_POLARITY; + regmap_read(regmap, NAU8825_REG_I2C_DEVICE_ID, &status); + is_high = status & NAU8825_GPIO2JD1; + /* return jack connection status according to jack insertion logic + * active high or active low. + */ + return active_high == is_high; +} + +static void nau8825_restart_jack_detection(struct regmap *regmap) +{ + /* this will restart the entire jack detection process including MIC/GND + * switching and create interrupts. We have to go from 0 to 1 and back + * to 0 to restart. + */ + regmap_update_bits(regmap, NAU8825_REG_JACK_DET_CTRL, + NAU8825_JACK_DET_RESTART, NAU8825_JACK_DET_RESTART); + regmap_update_bits(regmap, NAU8825_REG_JACK_DET_CTRL, + NAU8825_JACK_DET_RESTART, 0); +} + +static void nau8825_int_status_clear_all(struct regmap *regmap) +{ + int active_irq, clear_irq, i; + + /* Reset the intrruption status from rightmost bit if the corres- + * ponding irq event occurs. + */ + regmap_read(regmap, NAU8825_REG_IRQ_STATUS, &active_irq); + for (i = 0; i < NAU8825_REG_DATA_LEN; i++) { + clear_irq = (0x1 << i); + if (active_irq & clear_irq) + regmap_write(regmap, + NAU8825_REG_INT_CLR_KEY_STATUS, clear_irq); + } +} + +static void nau8825_eject_jack(struct nau8825 *nau8825) +{ + struct snd_soc_dapm_context *dapm = nau8825->dapm; + struct regmap *regmap = nau8825->regmap; + + /* Force to cancel the cross talk detection process */ + nau8825_xtalk_cancel(nau8825); + + snd_soc_dapm_disable_pin(dapm, "SAR"); + snd_soc_dapm_disable_pin(dapm, "MICBIAS"); + /* Detach 2kOhm Resistors from MICBIAS to MICGND1/2 */ + regmap_update_bits(regmap, NAU8825_REG_MIC_BIAS, + NAU8825_MICBIAS_JKSLV | NAU8825_MICBIAS_JKR2, 0); + /* ground HPL/HPR, MICGRND1/2 */ + regmap_update_bits(regmap, NAU8825_REG_HSD_CTRL, 0xf, 0xf); + + snd_soc_dapm_sync(dapm); + + /* Clear all interruption status */ + nau8825_int_status_clear_all(regmap); + + /* Enable the insertion interruption, disable the ejection inter- + * ruption, and then bypass de-bounce circuit. + */ + regmap_update_bits(regmap, NAU8825_REG_INTERRUPT_DIS_CTRL, + NAU8825_IRQ_EJECT_DIS | NAU8825_IRQ_INSERT_DIS, + NAU8825_IRQ_EJECT_DIS); + regmap_update_bits(regmap, NAU8825_REG_INTERRUPT_MASK, + NAU8825_IRQ_OUTPUT_EN | NAU8825_IRQ_EJECT_EN | + NAU8825_IRQ_HEADSET_COMPLETE_EN | NAU8825_IRQ_INSERT_EN, + NAU8825_IRQ_OUTPUT_EN | NAU8825_IRQ_EJECT_EN | + NAU8825_IRQ_HEADSET_COMPLETE_EN); + regmap_update_bits(regmap, NAU8825_REG_JACK_DET_CTRL, + NAU8825_JACK_DET_DB_BYPASS, NAU8825_JACK_DET_DB_BYPASS); + + /* Disable ADC needed for interruptions at audo mode */ + regmap_update_bits(regmap, NAU8825_REG_ENA_CTRL, + NAU8825_ENABLE_ADC, 0); + + /* Close clock for jack type detection at manual mode */ + nau8825_configure_sysclk(nau8825, NAU8825_CLK_DIS, 0); +} + +/* Enable audo mode interruptions with internal clock. */ +static void nau8825_setup_auto_irq(struct nau8825 *nau8825) +{ + struct regmap *regmap = nau8825->regmap; + + /* Enable headset jack type detection complete interruption and + * jack ejection interruption. + */ + regmap_update_bits(regmap, NAU8825_REG_INTERRUPT_MASK, + NAU8825_IRQ_HEADSET_COMPLETE_EN | NAU8825_IRQ_EJECT_EN, 0); + + /* Enable internal VCO needed for interruptions */ + nau8825_configure_sysclk(nau8825, NAU8825_CLK_INTERNAL, 0); + + /* Enable ADC needed for interruptions */ + regmap_update_bits(regmap, NAU8825_REG_ENA_CTRL, + NAU8825_ENABLE_ADC, NAU8825_ENABLE_ADC); + + /* Chip needs one FSCLK cycle in order to generate interruptions, + * as we cannot guarantee one will be provided by the system. Turning + * master mode on then off enables us to generate that FSCLK cycle + * with a minimum of contention on the clock bus. + */ + regmap_update_bits(regmap, NAU8825_REG_I2S_PCM_CTRL2, + NAU8825_I2S_MS_MASK, NAU8825_I2S_MS_MASTER); + regmap_update_bits(regmap, NAU8825_REG_I2S_PCM_CTRL2, + NAU8825_I2S_MS_MASK, NAU8825_I2S_MS_SLAVE); + + /* Not bypass de-bounce circuit */ + regmap_update_bits(regmap, NAU8825_REG_JACK_DET_CTRL, + NAU8825_JACK_DET_DB_BYPASS, 0); + + /* Unmask all interruptions */ + regmap_write(regmap, NAU8825_REG_INTERRUPT_DIS_CTRL, 0); + + /* Restart the jack detection process at auto mode */ + nau8825_restart_jack_detection(regmap); +} + +static int nau8825_button_decode(int value) +{ + int buttons = 0; + + /* The chip supports up to 8 buttons, but ALSA defines only 6 buttons */ + if (value & BIT(0)) + buttons |= SND_JACK_BTN_0; + if (value & BIT(1)) + buttons |= SND_JACK_BTN_1; + if (value & BIT(2)) + buttons |= SND_JACK_BTN_2; + if (value & BIT(3)) + buttons |= SND_JACK_BTN_3; + if (value & BIT(4)) + buttons |= SND_JACK_BTN_4; + if (value & BIT(5)) + buttons |= SND_JACK_BTN_5; + + return buttons; +} + +static int nau8825_jack_insert(struct nau8825 *nau8825) +{ + struct regmap *regmap = nau8825->regmap; + struct snd_soc_dapm_context *dapm = nau8825->dapm; + int jack_status_reg, mic_detected; + int type = 0; + + regmap_read(regmap, NAU8825_REG_GENERAL_STATUS, &jack_status_reg); + mic_detected = (jack_status_reg >> 10) & 3; + /* The JKSLV and JKR2 all detected in high impedance headset */ + if (mic_detected == 0x3) + nau8825->high_imped = true; + else + nau8825->high_imped = false; + + switch (mic_detected) { + case 0: + /* no mic */ + type = SND_JACK_HEADPHONE; + break; + case 1: + dev_dbg(nau8825->dev, "OMTP (micgnd1) mic connected\n"); + type = SND_JACK_HEADSET; + + /* Unground MICGND1 */ + regmap_update_bits(regmap, NAU8825_REG_HSD_CTRL, 3 << 2, + 1 << 2); + /* Attach 2kOhm Resistor from MICBIAS to MICGND1 */ + regmap_update_bits(regmap, NAU8825_REG_MIC_BIAS, + NAU8825_MICBIAS_JKSLV | NAU8825_MICBIAS_JKR2, + NAU8825_MICBIAS_JKR2); + /* Attach SARADC to MICGND1 */ + regmap_update_bits(regmap, NAU8825_REG_SAR_CTRL, + NAU8825_SAR_INPUT_MASK, + NAU8825_SAR_INPUT_JKR2); + + snd_soc_dapm_force_enable_pin(dapm, "MICBIAS"); + snd_soc_dapm_force_enable_pin(dapm, "SAR"); + snd_soc_dapm_sync(dapm); + break; + case 2: + dev_dbg(nau8825->dev, "CTIA (micgnd2) mic connected\n"); + type = SND_JACK_HEADSET; + + /* Unground MICGND2 */ + regmap_update_bits(regmap, NAU8825_REG_HSD_CTRL, 3 << 2, + 2 << 2); + /* Attach 2kOhm Resistor from MICBIAS to MICGND2 */ + regmap_update_bits(regmap, NAU8825_REG_MIC_BIAS, + NAU8825_MICBIAS_JKSLV | NAU8825_MICBIAS_JKR2, + NAU8825_MICBIAS_JKSLV); + /* Attach SARADC to MICGND2 */ + regmap_update_bits(regmap, NAU8825_REG_SAR_CTRL, + NAU8825_SAR_INPUT_MASK, + NAU8825_SAR_INPUT_JKSLV); + + snd_soc_dapm_force_enable_pin(dapm, "MICBIAS"); + snd_soc_dapm_force_enable_pin(dapm, "SAR"); + snd_soc_dapm_sync(dapm); + break; + case 3: + /* detect error case */ + dev_err(nau8825->dev, "detection error; disable mic function\n"); + type = SND_JACK_HEADPHONE; + break; + } + + /* Leaving HPOL/R grounded after jack insert by default. They will be + * ungrounded as part of the widget power up sequence at the beginning + * of playback to reduce pop. + */ + return type; +} + +#define NAU8825_BUTTONS (SND_JACK_BTN_0 | SND_JACK_BTN_1 | \ + SND_JACK_BTN_2 | SND_JACK_BTN_3) + +static irqreturn_t nau8825_interrupt(int irq, void *data) +{ + struct nau8825 *nau8825 = (struct nau8825 *)data; + struct regmap *regmap = nau8825->regmap; + int active_irq, clear_irq = 0, event = 0, event_mask = 0; + + if (regmap_read(regmap, NAU8825_REG_IRQ_STATUS, &active_irq)) { + dev_err(nau8825->dev, "failed to read irq status\n"); + return IRQ_NONE; + } + + if ((active_irq & NAU8825_JACK_EJECTION_IRQ_MASK) == + NAU8825_JACK_EJECTION_DETECTED) { + + nau8825_eject_jack(nau8825); + event_mask |= SND_JACK_HEADSET; + clear_irq = NAU8825_JACK_EJECTION_IRQ_MASK; + } else if (active_irq & NAU8825_KEY_SHORT_PRESS_IRQ) { + int key_status; + + regmap_read(regmap, NAU8825_REG_INT_CLR_KEY_STATUS, + &key_status); + + /* upper 8 bits of the register are for short pressed keys, + * lower 8 bits - for long pressed buttons + */ + nau8825->button_pressed = nau8825_button_decode( + key_status >> 8); + + event |= nau8825->button_pressed; + event_mask |= NAU8825_BUTTONS; + clear_irq = NAU8825_KEY_SHORT_PRESS_IRQ; + } else if (active_irq & NAU8825_KEY_RELEASE_IRQ) { + event_mask = NAU8825_BUTTONS; + clear_irq = NAU8825_KEY_RELEASE_IRQ; + } else if (active_irq & NAU8825_HEADSET_COMPLETION_IRQ) { + if (nau8825_is_jack_inserted(regmap)) { + event |= nau8825_jack_insert(nau8825); + if (nau8825->xtalk_enable && !nau8825->high_imped) { + /* Apply the cross talk suppression in the + * headset without high impedance. + */ + if (!nau8825->xtalk_protect) { + /* Raise protection for cross talk de- + * tection if no protection before. + * The driver has to cancel the pro- + * cess and restore changes if process + * is ongoing when ejection. + */ + int ret; + nau8825->xtalk_protect = true; + ret = nau8825_sema_acquire(nau8825, 0); + if (ret) + nau8825->xtalk_protect = false; + } + /* Startup cross talk detection process */ + if (nau8825->xtalk_protect) { + nau8825->xtalk_state = + NAU8825_XTALK_PREPARE; + schedule_work(&nau8825->xtalk_work); + } + } else { + /* The cross talk suppression shouldn't apply + * in the headset with high impedance. Thus, + * relieve the protection raised before. + */ + if (nau8825->xtalk_protect) { + nau8825_sema_release(nau8825); + nau8825->xtalk_protect = false; + } + } + } else { + dev_warn(nau8825->dev, "Headset completion IRQ fired but no headset connected\n"); + nau8825_eject_jack(nau8825); + } + + event_mask |= SND_JACK_HEADSET; + clear_irq = NAU8825_HEADSET_COMPLETION_IRQ; + /* Record the interruption report event for driver to report + * the event later. The jack report will delay until cross + * talk detection process is done. + */ + if (nau8825->xtalk_state == NAU8825_XTALK_PREPARE) { + nau8825->xtalk_event = event; + nau8825->xtalk_event_mask = event_mask; + } + } else if (active_irq & NAU8825_IMPEDANCE_MEAS_IRQ) { + /* crosstalk detection enable and process on going */ + if (nau8825->xtalk_enable && nau8825->xtalk_protect) + schedule_work(&nau8825->xtalk_work); + clear_irq = NAU8825_IMPEDANCE_MEAS_IRQ; + } else if ((active_irq & NAU8825_JACK_INSERTION_IRQ_MASK) == + NAU8825_JACK_INSERTION_DETECTED) { + /* One more step to check GPIO status directly. Thus, the + * driver can confirm the real insertion interruption because + * the intrruption at manual mode has bypassed debounce + * circuit which can get rid of unstable status. + */ + if (nau8825_is_jack_inserted(regmap)) { + /* Turn off insertion interruption at manual mode */ + regmap_update_bits(regmap, + NAU8825_REG_INTERRUPT_DIS_CTRL, + NAU8825_IRQ_INSERT_DIS, + NAU8825_IRQ_INSERT_DIS); + regmap_update_bits(regmap, NAU8825_REG_INTERRUPT_MASK, + NAU8825_IRQ_INSERT_EN, NAU8825_IRQ_INSERT_EN); + /* Enable interruption for jack type detection at audo + * mode which can detect microphone and jack type. + */ + nau8825_setup_auto_irq(nau8825); + } + } + + if (!clear_irq) + clear_irq = active_irq; + /* clears the rightmost interruption */ + regmap_write(regmap, NAU8825_REG_INT_CLR_KEY_STATUS, clear_irq); + + /* Delay jack report until cross talk detection is done. It can avoid + * application to do playback preparation when cross talk detection + * process is still working. Otherwise, the resource like clock and + * power will be issued by them at the same time and conflict happens. + */ + if (event_mask && nau8825->xtalk_state == NAU8825_XTALK_DONE) + snd_soc_jack_report(nau8825->jack, event, event_mask); + + return IRQ_HANDLED; +} + +static void nau8825_setup_buttons(struct nau8825 *nau8825) +{ + struct regmap *regmap = nau8825->regmap; + + regmap_update_bits(regmap, NAU8825_REG_SAR_CTRL, + NAU8825_SAR_TRACKING_GAIN_MASK, + nau8825->sar_voltage << NAU8825_SAR_TRACKING_GAIN_SFT); + regmap_update_bits(regmap, NAU8825_REG_SAR_CTRL, + NAU8825_SAR_COMPARE_TIME_MASK, + nau8825->sar_compare_time << NAU8825_SAR_COMPARE_TIME_SFT); + regmap_update_bits(regmap, NAU8825_REG_SAR_CTRL, + NAU8825_SAR_SAMPLING_TIME_MASK, + nau8825->sar_sampling_time << NAU8825_SAR_SAMPLING_TIME_SFT); + + regmap_update_bits(regmap, NAU8825_REG_KEYDET_CTRL, + NAU8825_KEYDET_LEVELS_NR_MASK, + (nau8825->sar_threshold_num - 1) << NAU8825_KEYDET_LEVELS_NR_SFT); + regmap_update_bits(regmap, NAU8825_REG_KEYDET_CTRL, + NAU8825_KEYDET_HYSTERESIS_MASK, + nau8825->sar_hysteresis << NAU8825_KEYDET_HYSTERESIS_SFT); + regmap_update_bits(regmap, NAU8825_REG_KEYDET_CTRL, + NAU8825_KEYDET_SHORTKEY_DEBOUNCE_MASK, + nau8825->key_debounce << NAU8825_KEYDET_SHORTKEY_DEBOUNCE_SFT); + + regmap_write(regmap, NAU8825_REG_VDET_THRESHOLD_1, + (nau8825->sar_threshold[0] << 8) | nau8825->sar_threshold[1]); + regmap_write(regmap, NAU8825_REG_VDET_THRESHOLD_2, + (nau8825->sar_threshold[2] << 8) | nau8825->sar_threshold[3]); + regmap_write(regmap, NAU8825_REG_VDET_THRESHOLD_3, + (nau8825->sar_threshold[4] << 8) | nau8825->sar_threshold[5]); + regmap_write(regmap, NAU8825_REG_VDET_THRESHOLD_4, + (nau8825->sar_threshold[6] << 8) | nau8825->sar_threshold[7]); + + /* Enable short press and release interruptions */ + regmap_update_bits(regmap, NAU8825_REG_INTERRUPT_MASK, + NAU8825_IRQ_KEY_SHORT_PRESS_EN | NAU8825_IRQ_KEY_RELEASE_EN, + 0); +} + +static void nau8825_init_regs(struct nau8825 *nau8825) +{ + struct regmap *regmap = nau8825->regmap; + + /* Latch IIC LSB value */ + regmap_write(regmap, NAU8825_REG_IIC_ADDR_SET, 0x0001); + /* Enable Bias/Vmid */ + regmap_update_bits(nau8825->regmap, NAU8825_REG_BIAS_ADJ, + NAU8825_BIAS_VMID, NAU8825_BIAS_VMID); + regmap_update_bits(nau8825->regmap, NAU8825_REG_BOOST, + NAU8825_GLOBAL_BIAS_EN, NAU8825_GLOBAL_BIAS_EN); + + /* VMID Tieoff */ + regmap_update_bits(regmap, NAU8825_REG_BIAS_ADJ, + NAU8825_BIAS_VMID_SEL_MASK, + nau8825->vref_impedance << NAU8825_BIAS_VMID_SEL_SFT); + /* Disable Boost Driver, Automatic Short circuit protection enable */ + regmap_update_bits(regmap, NAU8825_REG_BOOST, + NAU8825_PRECHARGE_DIS | NAU8825_HP_BOOST_DIS | + NAU8825_HP_BOOST_G_DIS | NAU8825_SHORT_SHUTDOWN_EN, + NAU8825_PRECHARGE_DIS | NAU8825_HP_BOOST_DIS | + NAU8825_HP_BOOST_G_DIS | NAU8825_SHORT_SHUTDOWN_EN); + + regmap_update_bits(regmap, NAU8825_REG_GPIO12_CTRL, + NAU8825_JKDET_OUTPUT_EN, + nau8825->jkdet_enable ? 0 : NAU8825_JKDET_OUTPUT_EN); + regmap_update_bits(regmap, NAU8825_REG_GPIO12_CTRL, + NAU8825_JKDET_PULL_EN, + nau8825->jkdet_pull_enable ? 0 : NAU8825_JKDET_PULL_EN); + regmap_update_bits(regmap, NAU8825_REG_GPIO12_CTRL, + NAU8825_JKDET_PULL_UP, + nau8825->jkdet_pull_up ? NAU8825_JKDET_PULL_UP : 0); + regmap_update_bits(regmap, NAU8825_REG_JACK_DET_CTRL, + NAU8825_JACK_POLARITY, + /* jkdet_polarity - 1 is for active-low */ + nau8825->jkdet_polarity ? 0 : NAU8825_JACK_POLARITY); + + regmap_update_bits(regmap, NAU8825_REG_JACK_DET_CTRL, + NAU8825_JACK_INSERT_DEBOUNCE_MASK, + nau8825->jack_insert_debounce << NAU8825_JACK_INSERT_DEBOUNCE_SFT); + regmap_update_bits(regmap, NAU8825_REG_JACK_DET_CTRL, + NAU8825_JACK_EJECT_DEBOUNCE_MASK, + nau8825->jack_eject_debounce << NAU8825_JACK_EJECT_DEBOUNCE_SFT); + + /* Pull up IRQ pin */ + regmap_update_bits(regmap, NAU8825_REG_INTERRUPT_MASK, + NAU8825_IRQ_PIN_PULLUP | NAU8825_IRQ_PIN_PULL_EN, + NAU8825_IRQ_PIN_PULLUP | NAU8825_IRQ_PIN_PULL_EN); + /* Mask unneeded IRQs: 1 - disable, 0 - enable */ + regmap_update_bits(regmap, NAU8825_REG_INTERRUPT_MASK, 0x7ff, 0x7ff); + + regmap_update_bits(regmap, NAU8825_REG_MIC_BIAS, + NAU8825_MICBIAS_VOLTAGE_MASK, nau8825->micbias_voltage); + + if (nau8825->sar_threshold_num) + nau8825_setup_buttons(nau8825); + + /* Default oversampling/decimations settings are unusable + * (audible hiss). Set it to something better. + */ + regmap_update_bits(regmap, NAU8825_REG_ADC_RATE, + NAU8825_ADC_SYNC_DOWN_MASK | NAU8825_ADC_SINC4_EN, + NAU8825_ADC_SYNC_DOWN_64); + regmap_update_bits(regmap, NAU8825_REG_DAC_CTRL1, + NAU8825_DAC_OVERSAMPLE_MASK, NAU8825_DAC_OVERSAMPLE_64); + /* Disable DACR/L power */ + regmap_update_bits(regmap, NAU8825_REG_CHARGE_PUMP, + NAU8825_POWER_DOWN_DACR | NAU8825_POWER_DOWN_DACL, + NAU8825_POWER_DOWN_DACR | NAU8825_POWER_DOWN_DACL); + /* Enable TESTDAC. This sets the analog DAC inputs to a '0' input + * signal to avoid any glitches due to power up transients in both + * the analog and digital DAC circuit. + */ + regmap_update_bits(nau8825->regmap, NAU8825_REG_BIAS_ADJ, + NAU8825_BIAS_TESTDAC_EN, NAU8825_BIAS_TESTDAC_EN); + /* CICCLP off */ + regmap_update_bits(regmap, NAU8825_REG_DAC_CTRL1, + NAU8825_DAC_CLIP_OFF, NAU8825_DAC_CLIP_OFF); + + /* Class AB bias current to 2x, DAC Capacitor enable MSB/LSB */ + regmap_update_bits(regmap, NAU8825_REG_ANALOG_CONTROL_2, + NAU8825_HP_NON_CLASSG_CURRENT_2xADJ | + NAU8825_DAC_CAPACITOR_MSB | NAU8825_DAC_CAPACITOR_LSB, + NAU8825_HP_NON_CLASSG_CURRENT_2xADJ | + NAU8825_DAC_CAPACITOR_MSB | NAU8825_DAC_CAPACITOR_LSB); + /* Class G timer 64ms */ + regmap_update_bits(regmap, NAU8825_REG_CLASSG_CTRL, + NAU8825_CLASSG_TIMER_MASK, + 0x20 << NAU8825_CLASSG_TIMER_SFT); + /* DAC clock delay 2ns, VREF */ + regmap_update_bits(regmap, NAU8825_REG_RDAC, + NAU8825_RDAC_CLK_DELAY_MASK | NAU8825_RDAC_VREF_MASK, + (0x2 << NAU8825_RDAC_CLK_DELAY_SFT) | + (0x3 << NAU8825_RDAC_VREF_SFT)); + /* Config L/R channel */ + regmap_update_bits(nau8825->regmap, NAU8825_REG_DACL_CTRL, + NAU8825_DACL_CH_SEL_MASK, NAU8825_DACL_CH_SEL_L); + regmap_update_bits(nau8825->regmap, NAU8825_REG_DACR_CTRL, + NAU8825_DACL_CH_SEL_MASK, NAU8825_DACL_CH_SEL_R); + /* Disable short Frame Sync detection logic */ + regmap_update_bits(regmap, NAU8825_REG_LEFT_TIME_SLOT, + NAU8825_DIS_FS_SHORT_DET, NAU8825_DIS_FS_SHORT_DET); +} + +static const struct regmap_config nau8825_regmap_config = { + .val_bits = NAU8825_REG_DATA_LEN, + .reg_bits = NAU8825_REG_ADDR_LEN, + + .max_register = NAU8825_REG_MAX, + .readable_reg = nau8825_readable_reg, + .writeable_reg = nau8825_writeable_reg, + .volatile_reg = nau8825_volatile_reg, + + .cache_type = REGCACHE_RBTREE, + .reg_defaults = nau8825_reg_defaults, + .num_reg_defaults = ARRAY_SIZE(nau8825_reg_defaults), +}; + +static int nau8825_component_probe(struct snd_soc_component *component) +{ + struct nau8825 *nau8825 = snd_soc_component_get_drvdata(component); + struct snd_soc_dapm_context *dapm = snd_soc_component_get_dapm(component); + + nau8825->dapm = dapm; + + return 0; +} + +static void nau8825_component_remove(struct snd_soc_component *component) +{ + struct nau8825 *nau8825 = snd_soc_component_get_drvdata(component); + + /* Cancel and reset cross tak suppresstion detection funciton */ + nau8825_xtalk_cancel(nau8825); +} + +/** + * nau8825_calc_fll_param - Calculate FLL parameters. + * @fll_in: external clock provided to codec. + * @fs: sampling rate. + * @fll_param: Pointer to structure of FLL parameters. + * + * Calculate FLL parameters to configure codec. + * + * Returns 0 for success or negative error code. + */ +static int nau8825_calc_fll_param(unsigned int fll_in, unsigned int fs, + struct nau8825_fll *fll_param) +{ + u64 fvco, fvco_max; + unsigned int fref, i, fvco_sel; + + /* Ensure the reference clock frequency (FREF) is <= 13.5MHz by dividing + * freq_in by 1, 2, 4, or 8 using FLL pre-scalar. + * FREF = freq_in / NAU8825_FLL_REF_DIV_MASK + */ + for (i = 0; i < ARRAY_SIZE(fll_pre_scalar); i++) { + fref = fll_in / fll_pre_scalar[i].param; + if (fref <= NAU_FREF_MAX) + break; + } + if (i == ARRAY_SIZE(fll_pre_scalar)) + return -EINVAL; + fll_param->clk_ref_div = fll_pre_scalar[i].val; + + /* Choose the FLL ratio based on FREF */ + for (i = 0; i < ARRAY_SIZE(fll_ratio); i++) { + if (fref >= fll_ratio[i].param) + break; + } + if (i == ARRAY_SIZE(fll_ratio)) + return -EINVAL; + fll_param->ratio = fll_ratio[i].val; + + /* Calculate the frequency of DCO (FDCO) given freq_out = 256 * Fs. + * FDCO must be within the 90MHz - 124MHz or the FFL cannot be + * guaranteed across the full range of operation. + * FDCO = freq_out * 2 * mclk_src_scaling + */ + fvco_max = 0; + fvco_sel = ARRAY_SIZE(mclk_src_scaling); + for (i = 0; i < ARRAY_SIZE(mclk_src_scaling); i++) { + fvco = 256ULL * fs * 2 * mclk_src_scaling[i].param; + if (fvco > NAU_FVCO_MIN && fvco < NAU_FVCO_MAX && + fvco_max < fvco) { + fvco_max = fvco; + fvco_sel = i; + } + } + if (ARRAY_SIZE(mclk_src_scaling) == fvco_sel) + return -EINVAL; + fll_param->mclk_src = mclk_src_scaling[fvco_sel].val; + + /* Calculate the FLL 10-bit integer input and the FLL 16-bit fractional + * input based on FDCO, FREF and FLL ratio. + */ + fvco = div_u64(fvco_max << 16, fref * fll_param->ratio); + fll_param->fll_int = (fvco >> 16) & 0x3FF; + fll_param->fll_frac = fvco & 0xFFFF; + return 0; +} + +static void nau8825_fll_apply(struct nau8825 *nau8825, + struct nau8825_fll *fll_param) +{ + regmap_update_bits(nau8825->regmap, NAU8825_REG_CLK_DIVIDER, + NAU8825_CLK_SRC_MASK | NAU8825_CLK_MCLK_SRC_MASK, + NAU8825_CLK_SRC_MCLK | fll_param->mclk_src); + /* Make DSP operate at high speed for better performance. */ + regmap_update_bits(nau8825->regmap, NAU8825_REG_FLL1, + NAU8825_FLL_RATIO_MASK | NAU8825_ICTRL_LATCH_MASK, + fll_param->ratio | (0x6 << NAU8825_ICTRL_LATCH_SFT)); + /* FLL 16-bit fractional input */ + regmap_write(nau8825->regmap, NAU8825_REG_FLL2, fll_param->fll_frac); + /* FLL 10-bit integer input */ + regmap_update_bits(nau8825->regmap, NAU8825_REG_FLL3, + NAU8825_FLL_INTEGER_MASK, fll_param->fll_int); + /* FLL pre-scaler */ + regmap_update_bits(nau8825->regmap, NAU8825_REG_FLL4, + NAU8825_FLL_REF_DIV_MASK, + fll_param->clk_ref_div << NAU8825_FLL_REF_DIV_SFT); + /* select divided VCO input */ + regmap_update_bits(nau8825->regmap, NAU8825_REG_FLL5, + NAU8825_FLL_CLK_SW_MASK, NAU8825_FLL_CLK_SW_REF); + /* Disable free-running mode */ + regmap_update_bits(nau8825->regmap, + NAU8825_REG_FLL6, NAU8825_DCO_EN, 0); + if (fll_param->fll_frac) { + /* set FLL loop filter enable and cutoff frequency at 500Khz */ + regmap_update_bits(nau8825->regmap, NAU8825_REG_FLL5, + NAU8825_FLL_PDB_DAC_EN | NAU8825_FLL_LOOP_FTR_EN | + NAU8825_FLL_FTR_SW_MASK, + NAU8825_FLL_PDB_DAC_EN | NAU8825_FLL_LOOP_FTR_EN | + NAU8825_FLL_FTR_SW_FILTER); + regmap_update_bits(nau8825->regmap, NAU8825_REG_FLL6, + NAU8825_SDM_EN | NAU8825_CUTOFF500, + NAU8825_SDM_EN | NAU8825_CUTOFF500); + } else { + /* disable FLL loop filter and cutoff frequency */ + regmap_update_bits(nau8825->regmap, NAU8825_REG_FLL5, + NAU8825_FLL_PDB_DAC_EN | NAU8825_FLL_LOOP_FTR_EN | + NAU8825_FLL_FTR_SW_MASK, NAU8825_FLL_FTR_SW_ACCU); + regmap_update_bits(nau8825->regmap, NAU8825_REG_FLL6, + NAU8825_SDM_EN | NAU8825_CUTOFF500, 0); + } +} + +/* freq_out must be 256*Fs in order to achieve the best performance */ +static int nau8825_set_pll(struct snd_soc_component *component, int pll_id, int source, + unsigned int freq_in, unsigned int freq_out) +{ + struct nau8825 *nau8825 = snd_soc_component_get_drvdata(component); + struct nau8825_fll fll_param; + int ret, fs; + + fs = freq_out / 256; + ret = nau8825_calc_fll_param(freq_in, fs, &fll_param); + if (ret < 0) { + dev_err(component->dev, "Unsupported input clock %d\n", freq_in); + return ret; + } + dev_dbg(component->dev, "mclk_src=%x ratio=%x fll_frac=%x fll_int=%x clk_ref_div=%x\n", + fll_param.mclk_src, fll_param.ratio, fll_param.fll_frac, + fll_param.fll_int, fll_param.clk_ref_div); + + nau8825_fll_apply(nau8825, &fll_param); + mdelay(2); + regmap_update_bits(nau8825->regmap, NAU8825_REG_CLK_DIVIDER, + NAU8825_CLK_SRC_MASK, NAU8825_CLK_SRC_VCO); + return 0; +} + +static int nau8825_mclk_prepare(struct nau8825 *nau8825, unsigned int freq) +{ + int ret = 0; + + nau8825->mclk = devm_clk_get(nau8825->dev, "mclk"); + if (IS_ERR(nau8825->mclk)) { + dev_info(nau8825->dev, "No 'mclk' clock found, assume MCLK is managed externally"); + return 0; + } + + if (!nau8825->mclk_freq) { + ret = clk_prepare_enable(nau8825->mclk); + if (ret) { + dev_err(nau8825->dev, "Unable to prepare codec mclk\n"); + return ret; + } + } + + if (nau8825->mclk_freq != freq) { + freq = clk_round_rate(nau8825->mclk, freq); + ret = clk_set_rate(nau8825->mclk, freq); + if (ret) { + dev_err(nau8825->dev, "Unable to set mclk rate\n"); + return ret; + } + nau8825->mclk_freq = freq; + } + + return 0; +} + +static void nau8825_configure_mclk_as_sysclk(struct regmap *regmap) +{ + regmap_update_bits(regmap, NAU8825_REG_CLK_DIVIDER, + NAU8825_CLK_SRC_MASK, NAU8825_CLK_SRC_MCLK); + regmap_update_bits(regmap, NAU8825_REG_FLL6, + NAU8825_DCO_EN, 0); + /* Make DSP operate as default setting for power saving. */ + regmap_update_bits(regmap, NAU8825_REG_FLL1, + NAU8825_ICTRL_LATCH_MASK, 0); +} + +static int nau8825_configure_sysclk(struct nau8825 *nau8825, int clk_id, + unsigned int freq) +{ + struct regmap *regmap = nau8825->regmap; + int ret; + + switch (clk_id) { + case NAU8825_CLK_DIS: + /* Clock provided externally and disable internal VCO clock */ + nau8825_configure_mclk_as_sysclk(regmap); + if (nau8825->mclk_freq) { + clk_disable_unprepare(nau8825->mclk); + nau8825->mclk_freq = 0; + } + + break; + case NAU8825_CLK_MCLK: + /* Acquire the semaphore to synchronize the playback and + * interrupt handler. In order to avoid the playback inter- + * fered by cross talk process, the driver make the playback + * preparation halted until cross talk process finish. + */ + nau8825_sema_acquire(nau8825, 3 * HZ); + nau8825_configure_mclk_as_sysclk(regmap); + /* MCLK not changed by clock tree */ + regmap_update_bits(regmap, NAU8825_REG_CLK_DIVIDER, + NAU8825_CLK_MCLK_SRC_MASK, 0); + /* Release the semaphore. */ + nau8825_sema_release(nau8825); + + ret = nau8825_mclk_prepare(nau8825, freq); + if (ret) + return ret; + + break; + case NAU8825_CLK_INTERNAL: + if (nau8825_is_jack_inserted(nau8825->regmap)) { + regmap_update_bits(regmap, NAU8825_REG_FLL6, + NAU8825_DCO_EN, NAU8825_DCO_EN); + regmap_update_bits(regmap, NAU8825_REG_CLK_DIVIDER, + NAU8825_CLK_SRC_MASK, NAU8825_CLK_SRC_VCO); + /* Decrease the VCO frequency and make DSP operate + * as default setting for power saving. + */ + regmap_update_bits(regmap, NAU8825_REG_CLK_DIVIDER, + NAU8825_CLK_MCLK_SRC_MASK, 0xf); + regmap_update_bits(regmap, NAU8825_REG_FLL1, + NAU8825_ICTRL_LATCH_MASK | + NAU8825_FLL_RATIO_MASK, 0x10); + regmap_update_bits(regmap, NAU8825_REG_FLL6, + NAU8825_SDM_EN, NAU8825_SDM_EN); + } else { + /* The clock turns off intentionally for power saving + * when no headset connected. + */ + nau8825_configure_mclk_as_sysclk(regmap); + dev_warn(nau8825->dev, "Disable clock for power saving when no headset connected\n"); + } + if (nau8825->mclk_freq) { + clk_disable_unprepare(nau8825->mclk); + nau8825->mclk_freq = 0; + } + + break; + case NAU8825_CLK_FLL_MCLK: + /* Acquire the semaphore to synchronize the playback and + * interrupt handler. In order to avoid the playback inter- + * fered by cross talk process, the driver make the playback + * preparation halted until cross talk process finish. + */ + nau8825_sema_acquire(nau8825, 3 * HZ); + /* Higher FLL reference input frequency can only set lower + * gain error, such as 0000 for input reference from MCLK + * 12.288Mhz. + */ + regmap_update_bits(regmap, NAU8825_REG_FLL3, + NAU8825_FLL_CLK_SRC_MASK | NAU8825_GAIN_ERR_MASK, + NAU8825_FLL_CLK_SRC_MCLK | 0); + /* Release the semaphore. */ + nau8825_sema_release(nau8825); + + ret = nau8825_mclk_prepare(nau8825, freq); + if (ret) + return ret; + + break; + case NAU8825_CLK_FLL_BLK: + /* Acquire the semaphore to synchronize the playback and + * interrupt handler. In order to avoid the playback inter- + * fered by cross talk process, the driver make the playback + * preparation halted until cross talk process finish. + */ + nau8825_sema_acquire(nau8825, 3 * HZ); + /* If FLL reference input is from low frequency source, + * higher error gain can apply such as 0xf which has + * the most sensitive gain error correction threshold, + * Therefore, FLL has the most accurate DCO to + * target frequency. + */ + regmap_update_bits(regmap, NAU8825_REG_FLL3, + NAU8825_FLL_CLK_SRC_MASK | NAU8825_GAIN_ERR_MASK, + NAU8825_FLL_CLK_SRC_BLK | + (0xf << NAU8825_GAIN_ERR_SFT)); + /* Release the semaphore. */ + nau8825_sema_release(nau8825); + + if (nau8825->mclk_freq) { + clk_disable_unprepare(nau8825->mclk); + nau8825->mclk_freq = 0; + } + + break; + case NAU8825_CLK_FLL_FS: + /* Acquire the semaphore to synchronize the playback and + * interrupt handler. In order to avoid the playback inter- + * fered by cross talk process, the driver make the playback + * preparation halted until cross talk process finish. + */ + nau8825_sema_acquire(nau8825, 3 * HZ); + /* If FLL reference input is from low frequency source, + * higher error gain can apply such as 0xf which has + * the most sensitive gain error correction threshold, + * Therefore, FLL has the most accurate DCO to + * target frequency. + */ + regmap_update_bits(regmap, NAU8825_REG_FLL3, + NAU8825_FLL_CLK_SRC_MASK | NAU8825_GAIN_ERR_MASK, + NAU8825_FLL_CLK_SRC_FS | + (0xf << NAU8825_GAIN_ERR_SFT)); + /* Release the semaphore. */ + nau8825_sema_release(nau8825); + + if (nau8825->mclk_freq) { + clk_disable_unprepare(nau8825->mclk); + nau8825->mclk_freq = 0; + } + + break; + default: + dev_err(nau8825->dev, "Invalid clock id (%d)\n", clk_id); + return -EINVAL; + } + + dev_dbg(nau8825->dev, "Sysclk is %dHz and clock id is %d\n", freq, + clk_id); + return 0; +} + +static int nau8825_set_sysclk(struct snd_soc_component *component, int clk_id, + int source, unsigned int freq, int dir) +{ + struct nau8825 *nau8825 = snd_soc_component_get_drvdata(component); + + return nau8825_configure_sysclk(nau8825, clk_id, freq); +} + +static int nau8825_resume_setup(struct nau8825 *nau8825) +{ + struct regmap *regmap = nau8825->regmap; + + /* Close clock when jack type detection at manual mode */ + nau8825_configure_sysclk(nau8825, NAU8825_CLK_DIS, 0); + + /* Clear all interruption status */ + nau8825_int_status_clear_all(regmap); + + /* Enable both insertion and ejection interruptions, and then + * bypass de-bounce circuit. + */ + regmap_update_bits(regmap, NAU8825_REG_INTERRUPT_MASK, + NAU8825_IRQ_OUTPUT_EN | NAU8825_IRQ_HEADSET_COMPLETE_EN | + NAU8825_IRQ_EJECT_EN | NAU8825_IRQ_INSERT_EN, + NAU8825_IRQ_OUTPUT_EN | NAU8825_IRQ_HEADSET_COMPLETE_EN); + regmap_update_bits(regmap, NAU8825_REG_JACK_DET_CTRL, + NAU8825_JACK_DET_DB_BYPASS, NAU8825_JACK_DET_DB_BYPASS); + regmap_update_bits(regmap, NAU8825_REG_INTERRUPT_DIS_CTRL, + NAU8825_IRQ_INSERT_DIS | NAU8825_IRQ_EJECT_DIS, 0); + + return 0; +} + +static int nau8825_set_bias_level(struct snd_soc_component *component, + enum snd_soc_bias_level level) +{ + struct nau8825 *nau8825 = snd_soc_component_get_drvdata(component); + int ret; + + switch (level) { + case SND_SOC_BIAS_ON: + break; + + case SND_SOC_BIAS_PREPARE: + break; + + case SND_SOC_BIAS_STANDBY: + if (snd_soc_component_get_bias_level(component) == SND_SOC_BIAS_OFF) { + if (nau8825->mclk_freq) { + ret = clk_prepare_enable(nau8825->mclk); + if (ret) { + dev_err(nau8825->dev, "Unable to prepare component mclk\n"); + return ret; + } + } + /* Setup codec configuration after resume */ + nau8825_resume_setup(nau8825); + } + break; + + case SND_SOC_BIAS_OFF: + /* Reset the configuration of jack type for detection */ + /* Detach 2kOhm Resistors from MICBIAS to MICGND1/2 */ + regmap_update_bits(nau8825->regmap, NAU8825_REG_MIC_BIAS, + NAU8825_MICBIAS_JKSLV | NAU8825_MICBIAS_JKR2, 0); + /* ground HPL/HPR, MICGRND1/2 */ + regmap_update_bits(nau8825->regmap, + NAU8825_REG_HSD_CTRL, 0xf, 0xf); + /* Cancel and reset cross talk detection funciton */ + nau8825_xtalk_cancel(nau8825); + /* Turn off all interruptions before system shutdown. Keep the + * interruption quiet before resume setup completes. + */ + regmap_write(nau8825->regmap, + NAU8825_REG_INTERRUPT_DIS_CTRL, 0xffff); + /* Disable ADC needed for interruptions at audo mode */ + regmap_update_bits(nau8825->regmap, NAU8825_REG_ENA_CTRL, + NAU8825_ENABLE_ADC, 0); + if (nau8825->mclk_freq) + clk_disable_unprepare(nau8825->mclk); + break; + } + return 0; +} + +static int __maybe_unused nau8825_suspend(struct snd_soc_component *component) +{ + struct nau8825 *nau8825 = snd_soc_component_get_drvdata(component); + + disable_irq(nau8825->irq); + snd_soc_component_force_bias_level(component, SND_SOC_BIAS_OFF); + /* Power down codec power; don't suppoet button wakeup */ + snd_soc_dapm_disable_pin(nau8825->dapm, "SAR"); + snd_soc_dapm_disable_pin(nau8825->dapm, "MICBIAS"); + snd_soc_dapm_sync(nau8825->dapm); + regcache_cache_only(nau8825->regmap, true); + regcache_mark_dirty(nau8825->regmap); + + return 0; +} + +static int __maybe_unused nau8825_resume(struct snd_soc_component *component) +{ + struct nau8825 *nau8825 = snd_soc_component_get_drvdata(component); + int ret; + + regcache_cache_only(nau8825->regmap, false); + regcache_sync(nau8825->regmap); + nau8825->xtalk_protect = true; + ret = nau8825_sema_acquire(nau8825, 0); + if (ret) + nau8825->xtalk_protect = false; + enable_irq(nau8825->irq); + + return 0; +} + +static const struct snd_soc_component_driver nau8825_component_driver = { + .probe = nau8825_component_probe, + .remove = nau8825_component_remove, + .set_sysclk = nau8825_set_sysclk, + .set_pll = nau8825_set_pll, + .set_bias_level = nau8825_set_bias_level, + .suspend = nau8825_suspend, + .resume = nau8825_resume, + .controls = nau8825_controls, + .num_controls = ARRAY_SIZE(nau8825_controls), + .dapm_widgets = nau8825_dapm_widgets, + .num_dapm_widgets = ARRAY_SIZE(nau8825_dapm_widgets), + .dapm_routes = nau8825_dapm_routes, + .num_dapm_routes = ARRAY_SIZE(nau8825_dapm_routes), + .suspend_bias_off = 1, + .idle_bias_on = 1, + .use_pmdown_time = 1, + .endianness = 1, + .non_legacy_dai_naming = 1, +}; + +static void nau8825_reset_chip(struct regmap *regmap) +{ + regmap_write(regmap, NAU8825_REG_RESET, 0x00); + regmap_write(regmap, NAU8825_REG_RESET, 0x00); +} + +static void nau8825_print_device_properties(struct nau8825 *nau8825) +{ + int i; + struct device *dev = nau8825->dev; + + dev_dbg(dev, "jkdet-enable: %d\n", nau8825->jkdet_enable); + dev_dbg(dev, "jkdet-pull-enable: %d\n", nau8825->jkdet_pull_enable); + dev_dbg(dev, "jkdet-pull-up: %d\n", nau8825->jkdet_pull_up); + dev_dbg(dev, "jkdet-polarity: %d\n", nau8825->jkdet_polarity); + dev_dbg(dev, "micbias-voltage: %d\n", nau8825->micbias_voltage); + dev_dbg(dev, "vref-impedance: %d\n", nau8825->vref_impedance); + + dev_dbg(dev, "sar-threshold-num: %d\n", nau8825->sar_threshold_num); + for (i = 0; i < nau8825->sar_threshold_num; i++) + dev_dbg(dev, "sar-threshold[%d]=%d\n", i, + nau8825->sar_threshold[i]); + + dev_dbg(dev, "sar-hysteresis: %d\n", nau8825->sar_hysteresis); + dev_dbg(dev, "sar-voltage: %d\n", nau8825->sar_voltage); + dev_dbg(dev, "sar-compare-time: %d\n", nau8825->sar_compare_time); + dev_dbg(dev, "sar-sampling-time: %d\n", nau8825->sar_sampling_time); + dev_dbg(dev, "short-key-debounce: %d\n", nau8825->key_debounce); + dev_dbg(dev, "jack-insert-debounce: %d\n", + nau8825->jack_insert_debounce); + dev_dbg(dev, "jack-eject-debounce: %d\n", + nau8825->jack_eject_debounce); + dev_dbg(dev, "crosstalk-enable: %d\n", + nau8825->xtalk_enable); +} + +static int nau8825_read_device_properties(struct device *dev, + struct nau8825 *nau8825) { + int ret; + + nau8825->jkdet_enable = device_property_read_bool(dev, + "nuvoton,jkdet-enable"); + nau8825->jkdet_pull_enable = device_property_read_bool(dev, + "nuvoton,jkdet-pull-enable"); + nau8825->jkdet_pull_up = device_property_read_bool(dev, + "nuvoton,jkdet-pull-up"); + ret = device_property_read_u32(dev, "nuvoton,jkdet-polarity", + &nau8825->jkdet_polarity); + if (ret) + nau8825->jkdet_polarity = 1; + ret = device_property_read_u32(dev, "nuvoton,micbias-voltage", + &nau8825->micbias_voltage); + if (ret) + nau8825->micbias_voltage = 6; + ret = device_property_read_u32(dev, "nuvoton,vref-impedance", + &nau8825->vref_impedance); + if (ret) + nau8825->vref_impedance = 2; + ret = device_property_read_u32(dev, "nuvoton,sar-threshold-num", + &nau8825->sar_threshold_num); + if (ret) + nau8825->sar_threshold_num = 4; + ret = device_property_read_u32_array(dev, "nuvoton,sar-threshold", + nau8825->sar_threshold, nau8825->sar_threshold_num); + if (ret) { + nau8825->sar_threshold[0] = 0x08; + nau8825->sar_threshold[1] = 0x12; + nau8825->sar_threshold[2] = 0x26; + nau8825->sar_threshold[3] = 0x73; + } + ret = device_property_read_u32(dev, "nuvoton,sar-hysteresis", + &nau8825->sar_hysteresis); + if (ret) + nau8825->sar_hysteresis = 0; + ret = device_property_read_u32(dev, "nuvoton,sar-voltage", + &nau8825->sar_voltage); + if (ret) + nau8825->sar_voltage = 6; + ret = device_property_read_u32(dev, "nuvoton,sar-compare-time", + &nau8825->sar_compare_time); + if (ret) + nau8825->sar_compare_time = 1; + ret = device_property_read_u32(dev, "nuvoton,sar-sampling-time", + &nau8825->sar_sampling_time); + if (ret) + nau8825->sar_sampling_time = 1; + ret = device_property_read_u32(dev, "nuvoton,short-key-debounce", + &nau8825->key_debounce); + if (ret) + nau8825->key_debounce = 3; + ret = device_property_read_u32(dev, "nuvoton,jack-insert-debounce", + &nau8825->jack_insert_debounce); + if (ret) + nau8825->jack_insert_debounce = 7; + ret = device_property_read_u32(dev, "nuvoton,jack-eject-debounce", + &nau8825->jack_eject_debounce); + if (ret) + nau8825->jack_eject_debounce = 0; + nau8825->xtalk_enable = device_property_read_bool(dev, + "nuvoton,crosstalk-enable"); + + nau8825->mclk = devm_clk_get(dev, "mclk"); + if (PTR_ERR(nau8825->mclk) == -EPROBE_DEFER) { + return -EPROBE_DEFER; + } else if (PTR_ERR(nau8825->mclk) == -ENOENT) { + /* The MCLK is managed externally or not used at all */ + nau8825->mclk = NULL; + dev_info(dev, "No 'mclk' clock found, assume MCLK is managed externally"); + } else if (IS_ERR(nau8825->mclk)) { + return -EINVAL; + } + + return 0; +} + +static int nau8825_setup_irq(struct nau8825 *nau8825) +{ + int ret; + + ret = devm_request_threaded_irq(nau8825->dev, nau8825->irq, NULL, + nau8825_interrupt, IRQF_TRIGGER_LOW | IRQF_ONESHOT, + "nau8825", nau8825); + + if (ret) { + dev_err(nau8825->dev, "Cannot request irq %d (%d)\n", + nau8825->irq, ret); + return ret; + } + + return 0; +} + +static int nau8825_i2c_probe(struct i2c_client *i2c, + const struct i2c_device_id *id) +{ + struct device *dev = &i2c->dev; + struct nau8825 *nau8825 = dev_get_platdata(&i2c->dev); + int ret, value; + + if (!nau8825) { + nau8825 = devm_kzalloc(dev, sizeof(*nau8825), GFP_KERNEL); + if (!nau8825) + return -ENOMEM; + ret = nau8825_read_device_properties(dev, nau8825); + if (ret) + return ret; + } + + i2c_set_clientdata(i2c, nau8825); + + nau8825->regmap = devm_regmap_init_i2c(i2c, &nau8825_regmap_config); + if (IS_ERR(nau8825->regmap)) + return PTR_ERR(nau8825->regmap); + nau8825->dev = dev; + nau8825->irq = i2c->irq; + /* Initiate parameters, semaphore and work queue which are needed in + * cross talk suppression measurment function. + */ + nau8825->xtalk_state = NAU8825_XTALK_DONE; + nau8825->xtalk_protect = false; + nau8825->xtalk_baktab_initialized = false; + sema_init(&nau8825->xtalk_sem, 1); + INIT_WORK(&nau8825->xtalk_work, nau8825_xtalk_work); + + nau8825_print_device_properties(nau8825); + + nau8825_reset_chip(nau8825->regmap); + ret = regmap_read(nau8825->regmap, NAU8825_REG_I2C_DEVICE_ID, &value); + if (ret < 0) { + dev_err(dev, "Failed to read device id from the NAU8825: %d\n", + ret); + return ret; + } + if ((value & NAU8825_SOFTWARE_ID_MASK) != + NAU8825_SOFTWARE_ID_NAU8825) { + dev_err(dev, "Not a NAU8825 chip\n"); + return -ENODEV; + } + + nau8825_init_regs(nau8825); + + if (i2c->irq) + nau8825_setup_irq(nau8825); + + return devm_snd_soc_register_component(&i2c->dev, + &nau8825_component_driver, + &nau8825_dai, 1); +} + +static int nau8825_i2c_remove(struct i2c_client *client) +{ + return 0; +} + +static const struct i2c_device_id nau8825_i2c_ids[] = { + { "nau8825", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, nau8825_i2c_ids); + +#ifdef CONFIG_OF +static const struct of_device_id nau8825_of_ids[] = { + { .compatible = "nuvoton,nau8825", }, + {} +}; +MODULE_DEVICE_TABLE(of, nau8825_of_ids); +#endif + +#ifdef CONFIG_ACPI +static const struct acpi_device_id nau8825_acpi_match[] = { + { "10508825", 0 }, + {}, +}; +MODULE_DEVICE_TABLE(acpi, nau8825_acpi_match); +#endif + +static struct i2c_driver nau8825_driver = { + .driver = { + .name = "nau8825", + .of_match_table = of_match_ptr(nau8825_of_ids), + .acpi_match_table = ACPI_PTR(nau8825_acpi_match), + }, + .probe = nau8825_i2c_probe, + .remove = nau8825_i2c_remove, + .id_table = nau8825_i2c_ids, +}; +module_i2c_driver(nau8825_driver); + +MODULE_DESCRIPTION("ASoC nau8825 driver"); +MODULE_AUTHOR("Anatol Pomozov <anatol@chromium.org>"); +MODULE_LICENSE("GPL"); |