diff options
Diffstat (limited to '')
| -rw-r--r-- | sound/soc/samsung/Kconfig | 236 |
1 files changed, 236 insertions, 0 deletions
diff --git a/sound/soc/samsung/Kconfig b/sound/soc/samsung/Kconfig new file mode 100644 index 000000000..a2221ebb1 --- /dev/null +++ b/sound/soc/samsung/Kconfig @@ -0,0 +1,236 @@ +# SPDX-License-Identifier: GPL-2.0-only +menuconfig SND_SOC_SAMSUNG + tristate "ASoC support for Samsung" + depends on PLAT_SAMSUNG || ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST + depends on COMMON_CLK + select SND_SOC_GENERIC_DMAENGINE_PCM + help + Say Y or M if you want to add support for codecs attached to + the Samsung SoCs' Audio interfaces. You will also need to + select the audio interfaces to support below. + +if SND_SOC_SAMSUNG + +config SND_S3C24XX_I2S + tristate + +config SND_S3C_I2SV2_SOC + tristate + +config SND_S3C2412_SOC_I2S + tristate + select SND_S3C_I2SV2_SOC + +config SND_SAMSUNG_PCM + tristate "Samsung PCM interface support" + +config SND_SAMSUNG_SPDIF + tristate "Samsung SPDIF transmitter support" + select SND_SOC_SPDIF + +config SND_SAMSUNG_I2S + tristate "Samsung I2S interface support" + +config SND_SOC_SAMSUNG_NEO1973_WM8753 + tristate "Audio support for Openmoko Neo1973 Smartphones (GTA02)" + depends on MACH_NEO1973_GTA02 + select SND_S3C24XX_I2S + select SND_SOC_WM8753 + select SND_SOC_BT_SCO + help + Say Y here to enable audio support for the Openmoko Neo1973 + Smartphones. + +config SND_SOC_SAMSUNG_JIVE_WM8750 + tristate "SoC I2S Audio support for Jive" + depends on MACH_JIVE && I2C + select SND_SOC_WM8750 + select SND_S3C2412_SOC_I2S + help + Say Y if you want to add support for SoC audio on the Jive. + +config SND_SOC_SAMSUNG_SMDK_WM8580 + tristate "SoC I2S Audio support for WM8580 on SMDK" + depends on MACH_SMDK6410 || COMPILE_TEST + depends on I2C + select SND_SOC_WM8580 + select SND_SAMSUNG_I2S + help + Say Y if you want to add support for SoC audio on the SMDKs. + +config SND_SOC_SAMSUNG_SMDK_WM8994 + tristate "SoC I2S Audio support for WM8994 on SMDK" + depends on I2C=y + select MFD_WM8994 + select SND_SOC_WM8994 + select SND_SAMSUNG_I2S + help + Say Y if you want to add support for SoC audio on the SMDKs. + +config SND_SOC_SAMSUNG_S3C24XX_UDA134X + tristate "SoC I2S Audio support UDA134X wired to a S3C24XX" + depends on ARCH_S3C24XX + select SND_S3C24XX_I2S + select SND_SOC_L3 + select SND_SOC_UDA134X + +config SND_SOC_SAMSUNG_SIMTEC + tristate + help + Internal node for common S3C24XX/Simtec support. + +config SND_SOC_SAMSUNG_SIMTEC_TLV320AIC23 + tristate "SoC I2S Audio support for TLV320AIC23 on Simtec boards" + depends on ARCH_S3C24XX && I2C + select SND_S3C24XX_I2S + select SND_SOC_TLV320AIC23_I2C + select SND_SOC_SAMSUNG_SIMTEC + +config SND_SOC_SAMSUNG_SIMTEC_HERMES + tristate "SoC I2S Audio support for Simtec Hermes board" + depends on ARCH_S3C24XX && I2C + select SND_S3C24XX_I2S + select SND_SOC_TLV320AIC3X + select SND_SOC_SAMSUNG_SIMTEC + +config SND_SOC_SAMSUNG_H1940_UDA1380 + tristate "Audio support for the HP iPAQ H1940" + depends on ARCH_H1940 && I2C + select SND_S3C24XX_I2S + select SND_SOC_UDA1380 + help + This driver provides audio support for HP iPAQ h1940 PDA. + +config SND_SOC_SAMSUNG_RX1950_UDA1380 + tristate "Audio support for the HP iPAQ RX1950" + depends on MACH_RX1950 && I2C + select SND_S3C24XX_I2S + select SND_SOC_UDA1380 + help + This driver provides audio support for HP iPAQ RX1950 PDA. + +config SND_SOC_SMARTQ + tristate "SoC I2S Audio support for SmartQ board" + depends on MACH_SMARTQ || COMPILE_TEST + depends on GPIOLIB || COMPILE_TEST + depends on I2C + select SND_SAMSUNG_I2S + select SND_SOC_WM8750 + +config SND_SOC_SAMSUNG_SMDK_SPDIF + tristate "SoC S/PDIF Audio support for SMDK" + select SND_SAMSUNG_SPDIF + help + Say Y if you want to add support for SoC S/PDIF audio on the SMDK. + +config SND_SOC_SMDK_WM8994_PCM + tristate "SoC PCM Audio support for WM8994 on SMDK" + depends on I2C=y + select MFD_WM8994 + select SND_SOC_WM8994 + select SND_SAMSUNG_PCM + help + Say Y if you want to add support for SoC audio on the SMDK + +config SND_SOC_SPEYSIDE + tristate "Audio support for Wolfson Speyside" + depends on I2C && SPI_MASTER + depends on MACH_WLF_CRAGG_6410 || COMPILE_TEST + select SND_SAMSUNG_I2S + select SND_SOC_WM8996 + select SND_SOC_WM9081 + select SND_SOC_WM0010 + select SND_SOC_WM1250_EV1 + +config SND_SOC_TOBERMORY + tristate "Audio support for Wolfson Tobermory" + depends on INPUT && I2C + depends on MACH_WLF_CRAGG_6410 || COMPILE_TEST + select SND_SAMSUNG_I2S + select SND_SOC_WM8962 + +config SND_SOC_BELLS + tristate "Audio support for Wolfson Bells" + depends on MFD_ARIZONA && MFD_WM5102 && MFD_WM5110 && I2C && SPI_MASTER + depends on MACH_WLF_CRAGG_6410 || COMPILE_TEST + select SND_SAMSUNG_I2S + select SND_SOC_WM5102 + select SND_SOC_WM5110 + select SND_SOC_WM9081 + select SND_SOC_WM0010 + select SND_SOC_WM1250_EV1 + +config SND_SOC_LOWLAND + tristate "Audio support for Wolfson Lowland" + depends on I2C + depends on MACH_WLF_CRAGG_6410 || COMPILE_TEST + select SND_SAMSUNG_I2S + select SND_SOC_WM5100 + select SND_SOC_WM9081 + +config SND_SOC_LITTLEMILL + tristate "Audio support for Wolfson Littlemill" + depends on I2C + depends on MACH_WLF_CRAGG_6410 || COMPILE_TEST + select SND_SAMSUNG_I2S + select MFD_WM8994 + select SND_SOC_WM8994 + +config SND_SOC_SNOW + tristate "Audio support for Google Snow boards" + depends on I2C + select SND_SOC_MAX98090 + select SND_SOC_MAX98095 + select SND_SAMSUNG_I2S + help + Say Y if you want to add audio support for various Snow + boards based on Exynos5 series of SoCs. + +config SND_SOC_ODROID + tristate "Audio support for Odroid XU3/XU4" + depends on SND_SOC_SAMSUNG && I2C + select SND_SOC_MAX98090 + select SND_SAMSUNG_I2S + help + Say Y here to enable audio support for the Odroid XU3/XU4. + +config SND_SOC_ARNDALE + tristate "Audio support for Arndale Board" + depends on I2C + select SND_SAMSUNG_I2S + select SND_SOC_RT5631 + select MFD_WM8994 + select SND_SOC_WM8994 + +config SND_SOC_SAMSUNG_TM2_WM5110 + tristate "SoC I2S Audio support for WM5110 on TM2 board" + depends on SND_SOC_SAMSUNG && MFD_ARIZONA && MFD_WM5110 && I2C && SPI_MASTER + depends on GPIOLIB || COMPILE_TEST + select SND_SOC_MAX98504 + select SND_SOC_WM5110 + select SND_SAMSUNG_I2S + help + Say Y if you want to add support for SoC audio on the TM2 board. + +config SND_SOC_SAMSUNG_ARIES_WM8994 + tristate "SoC I2S Audio support for WM8994 on Aries" + depends on SND_SOC_SAMSUNG && MFD_WM8994 && IIO && EXTCON + select SND_SOC_BT_SCO + select SND_SOC_WM8994 + select SND_SAMSUNG_I2S + help + Say Y if you want to add support for SoC audio on Aries boards, + which has a WM8994 codec connected to a BT codec, a cellular + modem, and the Samsung I2S controller. Jack detection is done + via ADC, GPIOs, and an extcon device. Switching between the Mic + and TV-Out path is also handled. + +config SND_SOC_SAMSUNG_MIDAS_WM1811 + tristate "SoC I2S Audio support for Midas boards" + depends on SND_SOC_SAMSUNG + select SND_SAMSUNG_I2S + select SND_SOC_WM8994 + help + Say Y if you want to add support for SoC audio on the Midas boards. + +endif #SND_SOC_SAMSUNG |