summaryrefslogtreecommitdiffstats
path: root/sound/soc/sof/core.c
diff options
context:
space:
mode:
Diffstat (limited to 'sound/soc/sof/core.c')
-rw-r--r--sound/soc/sof/core.c388
1 files changed, 388 insertions, 0 deletions
diff --git a/sound/soc/sof/core.c b/sound/soc/sof/core.c
new file mode 100644
index 000000000..feced9077
--- /dev/null
+++ b/sound/soc/sof/core.c
@@ -0,0 +1,388 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-3-Clause)
+//
+// This file is provided under a dual BSD/GPLv2 license. When using or
+// redistributing this file, you may do so under either license.
+//
+// Copyright(c) 2018 Intel Corporation. All rights reserved.
+//
+// Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
+//
+
+#include <linux/firmware.h>
+#include <linux/module.h>
+#include <sound/soc.h>
+#include <sound/sof.h>
+#include "sof-priv.h"
+#include "ops.h"
+#if IS_ENABLED(CONFIG_SND_SOC_SOF_DEBUG_PROBES)
+#include "probe.h"
+#endif
+
+/* see SOF_DBG_ flags */
+int sof_core_debug;
+module_param_named(sof_debug, sof_core_debug, int, 0444);
+MODULE_PARM_DESC(sof_debug, "SOF core debug options (0x0 all off)");
+
+/* SOF defaults if not provided by the platform in ms */
+#define TIMEOUT_DEFAULT_IPC_MS 500
+#define TIMEOUT_DEFAULT_BOOT_MS 2000
+
+/*
+ * FW Panic/fault handling.
+ */
+
+struct sof_panic_msg {
+ u32 id;
+ const char *msg;
+};
+
+/* standard FW panic types */
+static const struct sof_panic_msg panic_msg[] = {
+ {SOF_IPC_PANIC_MEM, "out of memory"},
+ {SOF_IPC_PANIC_WORK, "work subsystem init failed"},
+ {SOF_IPC_PANIC_IPC, "IPC subsystem init failed"},
+ {SOF_IPC_PANIC_ARCH, "arch init failed"},
+ {SOF_IPC_PANIC_PLATFORM, "platform init failed"},
+ {SOF_IPC_PANIC_TASK, "scheduler init failed"},
+ {SOF_IPC_PANIC_EXCEPTION, "runtime exception"},
+ {SOF_IPC_PANIC_DEADLOCK, "deadlock"},
+ {SOF_IPC_PANIC_STACK, "stack overflow"},
+ {SOF_IPC_PANIC_IDLE, "can't enter idle"},
+ {SOF_IPC_PANIC_WFI, "invalid wait state"},
+ {SOF_IPC_PANIC_ASSERT, "assertion failed"},
+};
+
+/*
+ * helper to be called from .dbg_dump callbacks. No error code is
+ * provided, it's left as an exercise for the caller of .dbg_dump
+ * (typically IPC or loader)
+ */
+void snd_sof_get_status(struct snd_sof_dev *sdev, u32 panic_code,
+ u32 tracep_code, void *oops,
+ struct sof_ipc_panic_info *panic_info,
+ void *stack, size_t stack_words)
+{
+ u32 code;
+ int i;
+
+ /* is firmware dead ? */
+ if ((panic_code & SOF_IPC_PANIC_MAGIC_MASK) != SOF_IPC_PANIC_MAGIC) {
+ dev_err(sdev->dev, "error: unexpected fault 0x%8.8x trace 0x%8.8x\n",
+ panic_code, tracep_code);
+ return; /* no fault ? */
+ }
+
+ code = panic_code & (SOF_IPC_PANIC_MAGIC_MASK | SOF_IPC_PANIC_CODE_MASK);
+
+ for (i = 0; i < ARRAY_SIZE(panic_msg); i++) {
+ if (panic_msg[i].id == code) {
+ dev_err(sdev->dev, "error: %s\n", panic_msg[i].msg);
+ dev_err(sdev->dev, "error: trace point %8.8x\n",
+ tracep_code);
+ goto out;
+ }
+ }
+
+ /* unknown error */
+ dev_err(sdev->dev, "error: unknown reason %8.8x\n", panic_code);
+ dev_err(sdev->dev, "error: trace point %8.8x\n", tracep_code);
+
+out:
+ dev_err(sdev->dev, "error: panic at %s:%d\n",
+ panic_info->filename, panic_info->linenum);
+ sof_oops(sdev, oops);
+ sof_stack(sdev, oops, stack, stack_words);
+}
+EXPORT_SYMBOL(snd_sof_get_status);
+
+/*
+ * FW Boot State Transition Diagram
+ *
+ * +-----------------------------------------------------------------------+
+ * | |
+ * ------------------ ------------------ |
+ * | | | | |
+ * | BOOT_FAILED | | READY_FAILED |-------------------------+ |
+ * | | | | | |
+ * ------------------ ------------------ | |
+ * ^ ^ | |
+ * | | | |
+ * (FW Boot Timeout) (FW_READY FAIL) | |
+ * | | | |
+ * | | | |
+ * ------------------ | ------------------ | |
+ * | | | | | | |
+ * | IN_PROGRESS |---------------+------------->| COMPLETE | | |
+ * | | (FW Boot OK) (FW_READY OK) | | | |
+ * ------------------ ------------------ | |
+ * ^ | | |
+ * | | | |
+ * (FW Loading OK) (System Suspend/Runtime Suspend)
+ * | | | |
+ * | | | |
+ * ------------------ ------------------ | | |
+ * | | | |<-----+ | |
+ * | PREPARE | | NOT_STARTED |<---------------------+ |
+ * | | | |<---------------------------+
+ * ------------------ ------------------
+ * | ^ | ^
+ * | | | |
+ * | +-----------------------+ |
+ * | (DSP Probe OK) |
+ * | |
+ * | |
+ * +------------------------------------+
+ * (System Suspend/Runtime Suspend)
+ */
+
+static int sof_probe_continue(struct snd_sof_dev *sdev)
+{
+ struct snd_sof_pdata *plat_data = sdev->pdata;
+ int ret;
+
+ /* probe the DSP hardware */
+ ret = snd_sof_probe(sdev);
+ if (ret < 0) {
+ dev_err(sdev->dev, "error: failed to probe DSP %d\n", ret);
+ return ret;
+ }
+
+ sdev->fw_state = SOF_FW_BOOT_PREPARE;
+
+ /* check machine info */
+ ret = sof_machine_check(sdev);
+ if (ret < 0) {
+ dev_err(sdev->dev, "error: failed to get machine info %d\n",
+ ret);
+ goto dbg_err;
+ }
+
+ /* set up platform component driver */
+ snd_sof_new_platform_drv(sdev);
+
+ /* register any debug/trace capabilities */
+ ret = snd_sof_dbg_init(sdev);
+ if (ret < 0) {
+ /*
+ * debugfs issues are suppressed in snd_sof_dbg_init() since
+ * we cannot rely on debugfs
+ * here we trap errors due to memory allocation only.
+ */
+ dev_err(sdev->dev, "error: failed to init DSP trace/debug %d\n",
+ ret);
+ goto dbg_err;
+ }
+
+ /* init the IPC */
+ sdev->ipc = snd_sof_ipc_init(sdev);
+ if (!sdev->ipc) {
+ ret = -ENOMEM;
+ dev_err(sdev->dev, "error: failed to init DSP IPC %d\n", ret);
+ goto ipc_err;
+ }
+
+ /* load the firmware */
+ ret = snd_sof_load_firmware(sdev);
+ if (ret < 0) {
+ dev_err(sdev->dev, "error: failed to load DSP firmware %d\n",
+ ret);
+ goto fw_load_err;
+ }
+
+ sdev->fw_state = SOF_FW_BOOT_IN_PROGRESS;
+
+ /*
+ * Boot the firmware. The FW boot status will be modified
+ * in snd_sof_run_firmware() depending on the outcome.
+ */
+ ret = snd_sof_run_firmware(sdev);
+ if (ret < 0) {
+ dev_err(sdev->dev, "error: failed to boot DSP firmware %d\n",
+ ret);
+ goto fw_run_err;
+ }
+
+ if (IS_ENABLED(CONFIG_SND_SOC_SOF_DEBUG_ENABLE_FIRMWARE_TRACE) ||
+ (sof_core_debug & SOF_DBG_ENABLE_TRACE)) {
+ sdev->dtrace_is_supported = true;
+
+ /* init DMA trace */
+ ret = snd_sof_init_trace(sdev);
+ if (ret < 0) {
+ /* non fatal */
+ dev_warn(sdev->dev,
+ "warning: failed to initialize trace %d\n",
+ ret);
+ }
+ } else {
+ dev_dbg(sdev->dev, "SOF firmware trace disabled\n");
+ }
+
+ /* hereafter all FW boot flows are for PM reasons */
+ sdev->first_boot = false;
+
+ /* now register audio DSP platform driver and dai */
+ ret = devm_snd_soc_register_component(sdev->dev, &sdev->plat_drv,
+ sof_ops(sdev)->drv,
+ sof_ops(sdev)->num_drv);
+ if (ret < 0) {
+ dev_err(sdev->dev,
+ "error: failed to register DSP DAI driver %d\n", ret);
+ goto fw_trace_err;
+ }
+
+ ret = snd_sof_machine_register(sdev, plat_data);
+ if (ret < 0)
+ goto fw_trace_err;
+
+ /*
+ * Some platforms in SOF, ex: BYT, may not have their platform PM
+ * callbacks set. Increment the usage count so as to
+ * prevent the device from entering runtime suspend.
+ */
+ if (!sof_ops(sdev)->runtime_suspend || !sof_ops(sdev)->runtime_resume)
+ pm_runtime_get_noresume(sdev->dev);
+
+ if (plat_data->sof_probe_complete)
+ plat_data->sof_probe_complete(sdev->dev);
+
+ return 0;
+
+fw_trace_err:
+ snd_sof_free_trace(sdev);
+fw_run_err:
+ snd_sof_fw_unload(sdev);
+fw_load_err:
+ snd_sof_ipc_free(sdev);
+ipc_err:
+ snd_sof_free_debug(sdev);
+dbg_err:
+ snd_sof_remove(sdev);
+
+ /* all resources freed, update state to match */
+ sdev->fw_state = SOF_FW_BOOT_NOT_STARTED;
+ sdev->first_boot = true;
+
+ return ret;
+}
+
+static void sof_probe_work(struct work_struct *work)
+{
+ struct snd_sof_dev *sdev =
+ container_of(work, struct snd_sof_dev, probe_work);
+ int ret;
+
+ ret = sof_probe_continue(sdev);
+ if (ret < 0) {
+ /* errors cannot be propagated, log */
+ dev_err(sdev->dev, "error: %s failed err: %d\n", __func__, ret);
+ }
+}
+
+int snd_sof_device_probe(struct device *dev, struct snd_sof_pdata *plat_data)
+{
+ struct snd_sof_dev *sdev;
+
+ sdev = devm_kzalloc(dev, sizeof(*sdev), GFP_KERNEL);
+ if (!sdev)
+ return -ENOMEM;
+
+ /* initialize sof device */
+ sdev->dev = dev;
+
+ /* initialize default DSP power state */
+ sdev->dsp_power_state.state = SOF_DSP_PM_D0;
+
+ sdev->pdata = plat_data;
+ sdev->first_boot = true;
+ sdev->fw_state = SOF_FW_BOOT_NOT_STARTED;
+#if IS_ENABLED(CONFIG_SND_SOC_SOF_DEBUG_PROBES)
+ sdev->extractor_stream_tag = SOF_PROBE_INVALID_NODE_ID;
+#endif
+ dev_set_drvdata(dev, sdev);
+
+ /* check all mandatory ops */
+ if (!sof_ops(sdev) || !sof_ops(sdev)->probe || !sof_ops(sdev)->run ||
+ !sof_ops(sdev)->block_read || !sof_ops(sdev)->block_write ||
+ !sof_ops(sdev)->send_msg || !sof_ops(sdev)->load_firmware ||
+ !sof_ops(sdev)->ipc_msg_data || !sof_ops(sdev)->ipc_pcm_params ||
+ !sof_ops(sdev)->fw_ready)
+ return -EINVAL;
+
+ INIT_LIST_HEAD(&sdev->pcm_list);
+ INIT_LIST_HEAD(&sdev->kcontrol_list);
+ INIT_LIST_HEAD(&sdev->widget_list);
+ INIT_LIST_HEAD(&sdev->dai_list);
+ INIT_LIST_HEAD(&sdev->route_list);
+ spin_lock_init(&sdev->ipc_lock);
+ spin_lock_init(&sdev->hw_lock);
+
+ if (IS_ENABLED(CONFIG_SND_SOC_SOF_PROBE_WORK_QUEUE))
+ INIT_WORK(&sdev->probe_work, sof_probe_work);
+
+ /* set default timeouts if none provided */
+ if (plat_data->desc->ipc_timeout == 0)
+ sdev->ipc_timeout = TIMEOUT_DEFAULT_IPC_MS;
+ else
+ sdev->ipc_timeout = plat_data->desc->ipc_timeout;
+ if (plat_data->desc->boot_timeout == 0)
+ sdev->boot_timeout = TIMEOUT_DEFAULT_BOOT_MS;
+ else
+ sdev->boot_timeout = plat_data->desc->boot_timeout;
+
+ if (IS_ENABLED(CONFIG_SND_SOC_SOF_PROBE_WORK_QUEUE)) {
+ schedule_work(&sdev->probe_work);
+ return 0;
+ }
+
+ return sof_probe_continue(sdev);
+}
+EXPORT_SYMBOL(snd_sof_device_probe);
+
+int snd_sof_device_remove(struct device *dev)
+{
+ struct snd_sof_dev *sdev = dev_get_drvdata(dev);
+ struct snd_sof_pdata *pdata = sdev->pdata;
+ int ret;
+
+ if (IS_ENABLED(CONFIG_SND_SOC_SOF_PROBE_WORK_QUEUE))
+ cancel_work_sync(&sdev->probe_work);
+
+ if (sdev->fw_state > SOF_FW_BOOT_NOT_STARTED) {
+ ret = snd_sof_dsp_power_down_notify(sdev);
+ if (ret < 0)
+ dev_warn(dev, "error: %d failed to prepare DSP for device removal",
+ ret);
+
+ snd_sof_ipc_free(sdev);
+ snd_sof_free_debug(sdev);
+ snd_sof_free_trace(sdev);
+ }
+
+ /*
+ * Unregister machine driver. This will unbind the snd_card which
+ * will remove the component driver and unload the topology
+ * before freeing the snd_card.
+ */
+ snd_sof_machine_unregister(sdev, pdata);
+
+ /*
+ * Unregistering the machine driver results in unloading the topology.
+ * Some widgets, ex: scheduler, attempt to power down the core they are
+ * scheduled on, when they are unloaded. Therefore, the DSP must be
+ * removed only after the topology has been unloaded.
+ */
+ if (sdev->fw_state > SOF_FW_BOOT_NOT_STARTED)
+ snd_sof_remove(sdev);
+
+ /* release firmware */
+ snd_sof_fw_unload(sdev);
+
+ return 0;
+}
+EXPORT_SYMBOL(snd_sof_device_remove);
+
+MODULE_AUTHOR("Liam Girdwood");
+MODULE_DESCRIPTION("Sound Open Firmware (SOF) Core");
+MODULE_LICENSE("Dual BSD/GPL");
+MODULE_ALIAS("platform:sof-audio");