diff options
Diffstat (limited to '')
| -rw-r--r-- | sound/usb/line6/driver.h | 216 |
1 files changed, 216 insertions, 0 deletions
diff --git a/sound/usb/line6/driver.h b/sound/usb/line6/driver.h new file mode 100644 index 000000000..ecf3a2b39 --- /dev/null +++ b/sound/usb/line6/driver.h @@ -0,0 +1,216 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Line 6 Linux USB driver + * + * Copyright (C) 2004-2010 Markus Grabner (grabner@icg.tugraz.at) + */ + +#ifndef DRIVER_H +#define DRIVER_H + +#include <linux/usb.h> +#include <linux/mutex.h> +#include <linux/kfifo.h> +#include <sound/core.h> + +#include "midi.h" + +/* USB 1.1 speed configuration */ +#define USB_LOW_INTERVALS_PER_SECOND 1000 +#define USB_LOW_ISO_BUFFERS 2 + +/* USB 2.0+ speed configuration */ +#define USB_HIGH_INTERVALS_PER_SECOND 8000 +#define USB_HIGH_ISO_BUFFERS 16 + +/* Fallback USB interval and max packet size values */ +#define LINE6_FALLBACK_INTERVAL 10 +#define LINE6_FALLBACK_MAXPACKETSIZE 16 + +#define LINE6_TIMEOUT 1000 +#define LINE6_BUFSIZE_LISTEN 64 +#define LINE6_MIDI_MESSAGE_MAXLEN 256 + +#define LINE6_RAW_MESSAGES_MAXCOUNT_ORDER 7 +/* 4k packets are common, BUFSIZE * MAXCOUNT should be bigger... */ +#define LINE6_RAW_MESSAGES_MAXCOUNT (1 << LINE6_RAW_MESSAGES_MAXCOUNT_ORDER) + + +#if LINE6_BUFSIZE_LISTEN > 65535 +#error "Use dynamic fifo instead" +#endif + +/* + Line 6 MIDI control commands +*/ +#define LINE6_PARAM_CHANGE 0xb0 +#define LINE6_PROGRAM_CHANGE 0xc0 +#define LINE6_SYSEX_BEGIN 0xf0 +#define LINE6_SYSEX_END 0xf7 +#define LINE6_RESET 0xff + +/* + MIDI channel for messages initiated by the host + (and eventually echoed back by the device) +*/ +#define LINE6_CHANNEL_HOST 0x00 + +/* + MIDI channel for messages initiated by the device +*/ +#define LINE6_CHANNEL_DEVICE 0x02 + +#define LINE6_CHANNEL_UNKNOWN 5 /* don't know yet what this is good for */ + +#define LINE6_CHANNEL_MASK 0x0f + +extern const unsigned char line6_midi_id[3]; + +#define SYSEX_DATA_OFS (sizeof(line6_midi_id) + 3) +#define SYSEX_EXTRA_SIZE (sizeof(line6_midi_id) + 4) + +/* + Common properties of Line 6 devices. +*/ +struct line6_properties { + /* Card id string (maximum 16 characters). + * This can be used to address the device in ALSA programs as + * "default:CARD=<id>" + */ + const char *id; + + /* Card short name (maximum 32 characters) */ + const char *name; + + /* Bit vector defining this device's capabilities in line6usb driver */ + int capabilities; + + int altsetting; + + unsigned int ctrl_if; + unsigned int ep_ctrl_r; + unsigned int ep_ctrl_w; + unsigned int ep_audio_r; + unsigned int ep_audio_w; +}; + +/* Capability bits */ +enum { + /* device supports settings parameter via USB */ + LINE6_CAP_CONTROL = 1 << 0, + /* device supports PCM input/output via USB */ + LINE6_CAP_PCM = 1 << 1, + /* device supports hardware monitoring */ + LINE6_CAP_HWMON = 1 << 2, + /* device requires output data when input is read */ + LINE6_CAP_IN_NEEDS_OUT = 1 << 3, + /* device uses raw MIDI via USB (data endpoints) */ + LINE6_CAP_CONTROL_MIDI = 1 << 4, + /* device provides low-level information */ + LINE6_CAP_CONTROL_INFO = 1 << 5, + /* device provides hardware monitoring volume control */ + LINE6_CAP_HWMON_CTL = 1 << 6, +}; + +/* + Common data shared by all Line 6 devices. + Corresponds to a pair of USB endpoints. +*/ +struct usb_line6 { + /* USB device */ + struct usb_device *usbdev; + + /* Properties */ + const struct line6_properties *properties; + + /* Interval for data USB packets */ + int interval; + /* ...for isochronous transfers framing */ + int intervals_per_second; + + /* Number of isochronous URBs used for frame transfers */ + int iso_buffers; + + /* Maximum size of data USB packet */ + int max_packet_size; + + /* Device representing the USB interface */ + struct device *ifcdev; + + /* Line 6 sound card data structure. + * Each device has at least MIDI or PCM. + */ + struct snd_card *card; + + /* Line 6 PCM device data structure */ + struct snd_line6_pcm *line6pcm; + + /* Line 6 MIDI device data structure */ + struct snd_line6_midi *line6midi; + + /* URB for listening to POD data endpoint */ + struct urb *urb_listen; + + /* Buffer for incoming data from POD data endpoint */ + unsigned char *buffer_listen; + + /* Buffer for message to be processed, generated from MIDI layer */ + unsigned char *buffer_message; + + /* Length of message to be processed, generated from MIDI layer */ + int message_length; + + /* Circular buffer for non-MIDI control messages */ + struct { + struct mutex read_lock; + wait_queue_head_t wait_queue; + unsigned int active:1; + unsigned int nonblock:1; + STRUCT_KFIFO_REC_2(LINE6_BUFSIZE_LISTEN * LINE6_RAW_MESSAGES_MAXCOUNT) + fifo; + } messages; + + /* Work for delayed PCM startup */ + struct delayed_work startup_work; + + /* If MIDI is supported, buffer_message contains the pre-processed data; + * otherwise the data is only in urb_listen (buffer_incoming). + */ + void (*process_message)(struct usb_line6 *); + void (*disconnect)(struct usb_line6 *line6); + void (*startup)(struct usb_line6 *line6); +}; + +extern char *line6_alloc_sysex_buffer(struct usb_line6 *line6, int code1, + int code2, int size); +extern int line6_read_data(struct usb_line6 *line6, unsigned address, + void *data, unsigned datalen); +extern int line6_read_serial_number(struct usb_line6 *line6, + u32 *serial_number); +extern int line6_send_raw_message(struct usb_line6 *line6, + const char *buffer, int size); +extern int line6_send_raw_message_async(struct usb_line6 *line6, + const char *buffer, int size); +extern int line6_send_sysex_message(struct usb_line6 *line6, + const char *buffer, int size); +extern ssize_t line6_set_raw(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count); +extern int line6_version_request_async(struct usb_line6 *line6); +extern int line6_write_data(struct usb_line6 *line6, unsigned address, + void *data, unsigned datalen); + +int line6_probe(struct usb_interface *interface, + const struct usb_device_id *id, + const char *driver_name, + const struct line6_properties *properties, + int (*private_init)(struct usb_line6 *, const struct usb_device_id *id), + size_t data_size); + +void line6_disconnect(struct usb_interface *interface); + +#ifdef CONFIG_PM +int line6_suspend(struct usb_interface *interface, pm_message_t message); +int line6_resume(struct usb_interface *interface); +#endif + +#endif |