diff options
Diffstat (limited to '')
| -rw-r--r-- | sound/usb/mixer_scarlett.c | 1011 |
1 files changed, 1011 insertions, 0 deletions
diff --git a/sound/usb/mixer_scarlett.c b/sound/usb/mixer_scarlett.c new file mode 100644 index 000000000..49fcd2505 --- /dev/null +++ b/sound/usb/mixer_scarlett.c @@ -0,0 +1,1011 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Scarlett Driver for ALSA + * + * Copyright (c) 2013 by Tobias Hoffmann + * Copyright (c) 2013 by Robin Gareus <robin at gareus.org> + * Copyright (c) 2002 by Takashi Iwai <tiwai at suse.de> + * Copyright (c) 2014 by Chris J Arges <chris.j.arges at canonical.com> + * + * Many codes borrowed from audio.c by + * Alan Cox (alan at lxorguk.ukuu.org.uk) + * Thomas Sailer (sailer at ife.ee.ethz.ch) + * + * Code cleanup: + * David Henningsson <david.henningsson at canonical.com> + */ + +/* + * Rewritten and extended to support more models, e.g. Scarlett 18i8. + * + * Auto-detection via UAC2 is not feasible to properly discover the vast + * majority of features. It's related to both Linux/ALSA's UAC2 as well as + * Focusrite's implementation of it. Eventually quirks may be sufficient but + * right now it's a major headache to work arount these things. + * + * NB. Neither the OSX nor the win driver provided by Focusrite performs + * discovery, they seem to operate the same as this driver. + */ + +/* Mixer Interface for the Focusrite Scarlett 18i6 audio interface. + * + * The protocol was reverse engineered by looking at communication between + * Scarlett MixControl (v 1.2.128.0) and the Focusrite(R) Scarlett 18i6 + * (firmware v305) using wireshark and usbmon in January 2013. + * Extended in July 2013. + * + * this mixer gives complete access to all features of the device: + * - change Impedance of inputs (Line-in, Mic / Instrument, Hi-Z) + * - select clock source + * - dynamic input to mixer-matrix assignment + * - 18 x 6 mixer-matrix gain stages + * - bus routing & volume control + * - automatic re-initialization on connect if device was power-cycled + * + * USB URB commands overview (bRequest = 0x01 = UAC2_CS_CUR) + * wIndex + * 0x01 Analog Input line/instrument impedance switch, wValue=0x0901 + + * channel, data=Line/Inst (2bytes) + * pad (-10dB) switch, wValue=0x0b01 + channel, data=Off/On (2bytes) + * ?? wValue=0x0803/04, ?? (2bytes) + * 0x0a Master Volume, wValue=0x0200+bus[0:all + only 1..4?] data(2bytes) + * Bus Mute/Unmute wValue=0x0100+bus[0:all + only 1..4?], data(2bytes) + * 0x28 Clock source, wValue=0x0100, data={1:int,2:spdif,3:adat} (1byte) + * 0x29 Set Sample-rate, wValue=0x0100, data=sample-rate(4bytes) + * 0x32 Mixer mux, wValue=0x0600 + mixer-channel, data=input-to-connect(2bytes) + * 0x33 Output mux, wValue=bus, data=input-to-connect(2bytes) + * 0x34 Capture mux, wValue=0...18, data=input-to-connect(2bytes) + * 0x3c Matrix Mixer gains, wValue=mixer-node data=gain(2bytes) + * ?? [sometimes](4bytes, e.g 0x000003be 0x000003bf ...03ff) + * + * USB reads: (i.e. actually issued by original software) + * 0x01 wValue=0x0901+channel (1byte!!), wValue=0x0b01+channed (1byte!!) + * 0x29 wValue=0x0100 sample-rate(4bytes) + * wValue=0x0200 ?? 1byte (only once) + * 0x2a wValue=0x0100 ?? 4bytes, sample-rate2 ?? + * + * USB reads with bRequest = 0x03 = UAC2_CS_MEM + * 0x3c wValue=0x0002 1byte: sync status (locked=1) + * wValue=0x0000 18*2byte: peak meter (inputs) + * wValue=0x0001 8(?)*2byte: peak meter (mix) + * wValue=0x0003 6*2byte: peak meter (pcm/daw) + * + * USB write with bRequest = 0x03 + * 0x3c Save settings to hardware: wValue=0x005a, data=0xa5 + * + * + * <ditaa> + * /--------------\ 18chn 6chn /--------------\ + * | Hardware in +--+-------\ /------+--+ ALSA PCM out | + * \--------------/ | | | | \--------------/ + * | | | | + * | v v | + * | +---------------+ | + * | \ Matrix Mux / | + * | +-----+-----+ | + * | | | + * | | 18chn | + * | v | + * | +-----------+ | + * | | Mixer | | + * | | Matrix | | + * | | | | + * | | 18x6 Gain | | + * | | stages | | + * | +-----+-----+ | + * | | | + * | | | + * | 18chn | 6chn | 6chn + * v v v + * ========================= + * +---------------+ +--—------------+ + * \ Output Mux / \ Capture Mux / + * +-----+-----+ +-----+-----+ + * | | + * | 6chn | + * v | + * +-------------+ | + * | Master Gain | | + * +------+------+ | + * | | + * | 6chn | 18chn + * | (3 stereo pairs) | + * /--------------\ | | /--------------\ + * | Hardware out |<--/ \-->| ALSA PCM in | + * \--------------/ \--------------/ + * </ditaa> + * + */ + +#include <linux/slab.h> +#include <linux/usb.h> +#include <linux/usb/audio-v2.h> + +#include <sound/core.h> +#include <sound/control.h> +#include <sound/tlv.h> + +#include "usbaudio.h" +#include "mixer.h" +#include "helper.h" +#include "power.h" + +#include "mixer_scarlett.h" + +/* some gui mixers can't handle negative ctl values */ +#define SND_SCARLETT_LEVEL_BIAS 128 +#define SND_SCARLETT_MATRIX_IN_MAX 18 +#define SND_SCARLETT_CONTROLS_MAX 10 +#define SND_SCARLETT_OFFSETS_MAX 5 + +enum { + SCARLETT_OUTPUTS, + SCARLETT_SWITCH_IMPEDANCE, + SCARLETT_SWITCH_PAD, + SCARLETT_SWITCH_GAIN, +}; + +enum { + SCARLETT_OFFSET_PCM = 0, + SCARLETT_OFFSET_ANALOG = 1, + SCARLETT_OFFSET_SPDIF = 2, + SCARLETT_OFFSET_ADAT = 3, + SCARLETT_OFFSET_MIX = 4, +}; + +struct scarlett_mixer_elem_enum_info { + int start; + int len; + int offsets[SND_SCARLETT_OFFSETS_MAX]; + char const * const *names; +}; + +struct scarlett_mixer_control { + unsigned char num; + unsigned char type; + const char *name; +}; + +struct scarlett_device_info { + int matrix_in; + int matrix_out; + int input_len; + int output_len; + + struct scarlett_mixer_elem_enum_info opt_master; + struct scarlett_mixer_elem_enum_info opt_matrix; + + /* initial values for matrix mux */ + int matrix_mux_init[SND_SCARLETT_MATRIX_IN_MAX]; + + int num_controls; /* number of items in controls */ + const struct scarlett_mixer_control controls[SND_SCARLETT_CONTROLS_MAX]; +}; + +/********************** Enum Strings *************************/ + +static const struct scarlett_mixer_elem_enum_info opt_pad = { + .start = 0, + .len = 2, + .offsets = {}, + .names = (char const * const []){ + "0dB", "-10dB" + } +}; + +static const struct scarlett_mixer_elem_enum_info opt_gain = { + .start = 0, + .len = 2, + .offsets = {}, + .names = (char const * const []){ + "Lo", "Hi" + } +}; + +static const struct scarlett_mixer_elem_enum_info opt_impedance = { + .start = 0, + .len = 2, + .offsets = {}, + .names = (char const * const []){ + "Line", "Hi-Z" + } +}; + +static const struct scarlett_mixer_elem_enum_info opt_clock = { + .start = 1, + .len = 3, + .offsets = {}, + .names = (char const * const []){ + "Internal", "SPDIF", "ADAT" + } +}; + +static const struct scarlett_mixer_elem_enum_info opt_sync = { + .start = 0, + .len = 2, + .offsets = {}, + .names = (char const * const []){ + "No Lock", "Locked" + } +}; + +static int scarlett_ctl_switch_info(struct snd_kcontrol *kctl, + struct snd_ctl_elem_info *uinfo) +{ + struct usb_mixer_elem_info *elem = kctl->private_data; + + uinfo->type = SNDRV_CTL_ELEM_TYPE_BOOLEAN; + uinfo->count = elem->channels; + uinfo->value.integer.min = 0; + uinfo->value.integer.max = 1; + return 0; +} + +static int scarlett_ctl_switch_get(struct snd_kcontrol *kctl, + struct snd_ctl_elem_value *ucontrol) +{ + struct usb_mixer_elem_info *elem = kctl->private_data; + int i, err, val; + + for (i = 0; i < elem->channels; i++) { + err = snd_usb_get_cur_mix_value(elem, i, i, &val); + if (err < 0) + return err; + + val = !val; /* invert mute logic for mixer */ + ucontrol->value.integer.value[i] = val; + } + + return 0; +} + +static int scarlett_ctl_switch_put(struct snd_kcontrol *kctl, + struct snd_ctl_elem_value *ucontrol) +{ + struct usb_mixer_elem_info *elem = kctl->private_data; + int i, changed = 0; + int err, oval, val; + + for (i = 0; i < elem->channels; i++) { + err = snd_usb_get_cur_mix_value(elem, i, i, &oval); + if (err < 0) + return err; + + val = ucontrol->value.integer.value[i]; + val = !val; + if (oval != val) { + err = snd_usb_set_cur_mix_value(elem, i, i, val); + if (err < 0) + return err; + + changed = 1; + } + } + + return changed; +} + +static int scarlett_ctl_resume(struct usb_mixer_elem_list *list) +{ + struct usb_mixer_elem_info *elem = mixer_elem_list_to_info(list); + int i; + + for (i = 0; i < elem->channels; i++) + if (elem->cached & (1 << i)) + snd_usb_set_cur_mix_value(elem, i, i, + elem->cache_val[i]); + return 0; +} + +static int scarlett_ctl_info(struct snd_kcontrol *kctl, + struct snd_ctl_elem_info *uinfo) +{ + struct usb_mixer_elem_info *elem = kctl->private_data; + + uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER; + uinfo->count = elem->channels; + uinfo->value.integer.min = 0; + uinfo->value.integer.max = (int)kctl->private_value + + SND_SCARLETT_LEVEL_BIAS; + uinfo->value.integer.step = 1; + return 0; +} + +static int scarlett_ctl_get(struct snd_kcontrol *kctl, + struct snd_ctl_elem_value *ucontrol) +{ + struct usb_mixer_elem_info *elem = kctl->private_data; + int i, err, val; + + for (i = 0; i < elem->channels; i++) { + err = snd_usb_get_cur_mix_value(elem, i, i, &val); + if (err < 0) + return err; + + val = clamp(val / 256, -128, (int)kctl->private_value) + + SND_SCARLETT_LEVEL_BIAS; + ucontrol->value.integer.value[i] = val; + } + + return 0; +} + +static int scarlett_ctl_put(struct snd_kcontrol *kctl, + struct snd_ctl_elem_value *ucontrol) +{ + struct usb_mixer_elem_info *elem = kctl->private_data; + int i, changed = 0; + int err, oval, val; + + for (i = 0; i < elem->channels; i++) { + err = snd_usb_get_cur_mix_value(elem, i, i, &oval); + if (err < 0) + return err; + + val = ucontrol->value.integer.value[i] - + SND_SCARLETT_LEVEL_BIAS; + val = val * 256; + if (oval != val) { + err = snd_usb_set_cur_mix_value(elem, i, i, val); + if (err < 0) + return err; + + changed = 1; + } + } + + return changed; +} + +static void scarlett_generate_name(int i, char *dst, int offsets[]) +{ + if (i > offsets[SCARLETT_OFFSET_MIX]) + sprintf(dst, "Mix %c", + 'A'+(i - offsets[SCARLETT_OFFSET_MIX] - 1)); + else if (i > offsets[SCARLETT_OFFSET_ADAT]) + sprintf(dst, "ADAT %d", i - offsets[SCARLETT_OFFSET_ADAT]); + else if (i > offsets[SCARLETT_OFFSET_SPDIF]) + sprintf(dst, "SPDIF %d", i - offsets[SCARLETT_OFFSET_SPDIF]); + else if (i > offsets[SCARLETT_OFFSET_ANALOG]) + sprintf(dst, "Analog %d", i - offsets[SCARLETT_OFFSET_ANALOG]); + else if (i > offsets[SCARLETT_OFFSET_PCM]) + sprintf(dst, "PCM %d", i - offsets[SCARLETT_OFFSET_PCM]); + else + sprintf(dst, "Off"); +} + +static int scarlett_ctl_enum_dynamic_info(struct snd_kcontrol *kctl, + struct snd_ctl_elem_info *uinfo) +{ + struct usb_mixer_elem_info *elem = kctl->private_data; + struct scarlett_mixer_elem_enum_info *opt = elem->private_data; + unsigned int items = opt->len; + + uinfo->type = SNDRV_CTL_ELEM_TYPE_ENUMERATED; + uinfo->count = elem->channels; + uinfo->value.enumerated.items = items; + + if (uinfo->value.enumerated.item >= items) + uinfo->value.enumerated.item = items - 1; + + /* generate name dynamically based on item number and offset info */ + scarlett_generate_name(uinfo->value.enumerated.item, + uinfo->value.enumerated.name, + opt->offsets); + + return 0; +} + +static int scarlett_ctl_enum_info(struct snd_kcontrol *kctl, + struct snd_ctl_elem_info *uinfo) +{ + struct usb_mixer_elem_info *elem = kctl->private_data; + struct scarlett_mixer_elem_enum_info *opt = elem->private_data; + + return snd_ctl_enum_info(uinfo, elem->channels, opt->len, + (const char * const *)opt->names); +} + +static int scarlett_ctl_enum_get(struct snd_kcontrol *kctl, + struct snd_ctl_elem_value *ucontrol) +{ + struct usb_mixer_elem_info *elem = kctl->private_data; + struct scarlett_mixer_elem_enum_info *opt = elem->private_data; + int err, val; + + err = snd_usb_get_cur_mix_value(elem, 0, 0, &val); + if (err < 0) + return err; + + val = clamp(val - opt->start, 0, opt->len-1); + + ucontrol->value.enumerated.item[0] = val; + + return 0; +} + +static int scarlett_ctl_enum_put(struct snd_kcontrol *kctl, + struct snd_ctl_elem_value *ucontrol) +{ + struct usb_mixer_elem_info *elem = kctl->private_data; + struct scarlett_mixer_elem_enum_info *opt = elem->private_data; + int err, oval, val; + + err = snd_usb_get_cur_mix_value(elem, 0, 0, &oval); + if (err < 0) + return err; + + val = ucontrol->value.integer.value[0]; + val = val + opt->start; + if (val != oval) { + snd_usb_set_cur_mix_value(elem, 0, 0, val); + return 1; + } + return 0; +} + +static int scarlett_ctl_enum_resume(struct usb_mixer_elem_list *list) +{ + struct usb_mixer_elem_info *elem = mixer_elem_list_to_info(list); + + if (elem->cached) + snd_usb_set_cur_mix_value(elem, 0, 0, *elem->cache_val); + return 0; +} + +static int scarlett_ctl_meter_get(struct snd_kcontrol *kctl, + struct snd_ctl_elem_value *ucontrol) +{ + struct usb_mixer_elem_info *elem = kctl->private_data; + struct snd_usb_audio *chip = elem->head.mixer->chip; + unsigned char buf[2 * MAX_CHANNELS] = {0, }; + int wValue = (elem->control << 8) | elem->idx_off; + int idx = snd_usb_ctrl_intf(chip) | (elem->head.id << 8); + int err; + + err = snd_usb_ctl_msg(chip->dev, + usb_rcvctrlpipe(chip->dev, 0), + UAC2_CS_MEM, + USB_RECIP_INTERFACE | USB_TYPE_CLASS | + USB_DIR_IN, wValue, idx, buf, elem->channels); + if (err < 0) + return err; + + ucontrol->value.enumerated.item[0] = clamp((int)buf[0], 0, 1); + return 0; +} + +static const struct snd_kcontrol_new usb_scarlett_ctl_switch = { + .iface = SNDRV_CTL_ELEM_IFACE_MIXER, + .name = "", + .info = scarlett_ctl_switch_info, + .get = scarlett_ctl_switch_get, + .put = scarlett_ctl_switch_put, +}; + +static const DECLARE_TLV_DB_SCALE(db_scale_scarlett_gain, -12800, 100, 0); + +static const struct snd_kcontrol_new usb_scarlett_ctl = { + .iface = SNDRV_CTL_ELEM_IFACE_MIXER, + .access = SNDRV_CTL_ELEM_ACCESS_READWRITE | + SNDRV_CTL_ELEM_ACCESS_TLV_READ, + .name = "", + .info = scarlett_ctl_info, + .get = scarlett_ctl_get, + .put = scarlett_ctl_put, + .private_value = 6, /* max value */ + .tlv = { .p = db_scale_scarlett_gain } +}; + +static const struct snd_kcontrol_new usb_scarlett_ctl_master = { + .iface = SNDRV_CTL_ELEM_IFACE_MIXER, + .access = SNDRV_CTL_ELEM_ACCESS_READWRITE | + SNDRV_CTL_ELEM_ACCESS_TLV_READ, + .name = "", + .info = scarlett_ctl_info, + .get = scarlett_ctl_get, + .put = scarlett_ctl_put, + .private_value = 6, /* max value */ + .tlv = { .p = db_scale_scarlett_gain } +}; + +static const struct snd_kcontrol_new usb_scarlett_ctl_enum = { + .iface = SNDRV_CTL_ELEM_IFACE_MIXER, + .name = "", + .info = scarlett_ctl_enum_info, + .get = scarlett_ctl_enum_get, + .put = scarlett_ctl_enum_put, +}; + +static const struct snd_kcontrol_new usb_scarlett_ctl_dynamic_enum = { + .iface = SNDRV_CTL_ELEM_IFACE_MIXER, + .name = "", + .info = scarlett_ctl_enum_dynamic_info, + .get = scarlett_ctl_enum_get, + .put = scarlett_ctl_enum_put, +}; + +static const struct snd_kcontrol_new usb_scarlett_ctl_sync = { + .iface = SNDRV_CTL_ELEM_IFACE_MIXER, + .access = SNDRV_CTL_ELEM_ACCESS_READ | SNDRV_CTL_ELEM_ACCESS_VOLATILE, + .name = "", + .info = scarlett_ctl_enum_info, + .get = scarlett_ctl_meter_get, +}; + +static int add_new_ctl(struct usb_mixer_interface *mixer, + const struct snd_kcontrol_new *ncontrol, + usb_mixer_elem_resume_func_t resume, + int index, int offset, int num, + int val_type, int channels, const char *name, + const struct scarlett_mixer_elem_enum_info *opt, + struct usb_mixer_elem_info **elem_ret +) +{ + struct snd_kcontrol *kctl; + struct usb_mixer_elem_info *elem; + int err; + + elem = kzalloc(sizeof(*elem), GFP_KERNEL); + if (!elem) + return -ENOMEM; + + elem->head.mixer = mixer; + elem->head.resume = resume; + elem->control = offset; + elem->idx_off = num; + elem->head.id = index; + elem->val_type = val_type; + + elem->channels = channels; + + /* add scarlett_mixer_elem_enum_info struct */ + elem->private_data = (void *)opt; + + kctl = snd_ctl_new1(ncontrol, elem); + if (!kctl) { + kfree(elem); + return -ENOMEM; + } + kctl->private_free = snd_usb_mixer_elem_free; + + strlcpy(kctl->id.name, name, sizeof(kctl->id.name)); + + err = snd_usb_mixer_add_control(&elem->head, kctl); + if (err < 0) + return err; + + if (elem_ret) + *elem_ret = elem; + + return 0; +} + +static int add_output_ctls(struct usb_mixer_interface *mixer, + int index, const char *name, + const struct scarlett_device_info *info) +{ + int err; + char mx[SNDRV_CTL_ELEM_ID_NAME_MAXLEN]; + struct usb_mixer_elem_info *elem; + + /* Add mute switch */ + snprintf(mx, sizeof(mx), "Master %d (%s) Playback Switch", + index + 1, name); + err = add_new_ctl(mixer, &usb_scarlett_ctl_switch, + scarlett_ctl_resume, 0x0a, 0x01, + 2*index+1, USB_MIXER_S16, 2, mx, NULL, &elem); + if (err < 0) + return err; + + /* Add volume control and initialize to 0 */ + snprintf(mx, sizeof(mx), "Master %d (%s) Playback Volume", + index + 1, name); + err = add_new_ctl(mixer, &usb_scarlett_ctl_master, + scarlett_ctl_resume, 0x0a, 0x02, + 2*index+1, USB_MIXER_S16, 2, mx, NULL, &elem); + if (err < 0) + return err; + + /* Add L channel source playback enumeration */ + snprintf(mx, sizeof(mx), "Master %dL (%s) Source Playback Enum", + index + 1, name); + err = add_new_ctl(mixer, &usb_scarlett_ctl_dynamic_enum, + scarlett_ctl_enum_resume, 0x33, 0x00, + 2*index, USB_MIXER_S16, 1, mx, &info->opt_master, + &elem); + if (err < 0) + return err; + + /* Add R channel source playback enumeration */ + snprintf(mx, sizeof(mx), "Master %dR (%s) Source Playback Enum", + index + 1, name); + err = add_new_ctl(mixer, &usb_scarlett_ctl_dynamic_enum, + scarlett_ctl_enum_resume, 0x33, 0x00, + 2*index+1, USB_MIXER_S16, 1, mx, &info->opt_master, + &elem); + if (err < 0) + return err; + + return 0; +} + +/********************** device-specific config *************************/ + +/* untested... */ +static const struct scarlett_device_info s6i6_info = { + .matrix_in = 18, + .matrix_out = 8, + .input_len = 6, + .output_len = 6, + + .opt_master = { + .start = -1, + .len = 27, + .offsets = {0, 12, 16, 18, 18}, + .names = NULL + }, + + .opt_matrix = { + .start = -1, + .len = 19, + .offsets = {0, 12, 16, 18, 18}, + .names = NULL + }, + + .num_controls = 9, + .controls = { + { .num = 0, .type = SCARLETT_OUTPUTS, .name = "Monitor" }, + { .num = 1, .type = SCARLETT_OUTPUTS, .name = "Headphone" }, + { .num = 2, .type = SCARLETT_OUTPUTS, .name = "SPDIF" }, + { .num = 1, .type = SCARLETT_SWITCH_IMPEDANCE, .name = NULL}, + { .num = 1, .type = SCARLETT_SWITCH_PAD, .name = NULL}, + { .num = 2, .type = SCARLETT_SWITCH_IMPEDANCE, .name = NULL}, + { .num = 2, .type = SCARLETT_SWITCH_PAD, .name = NULL}, + { .num = 3, .type = SCARLETT_SWITCH_GAIN, .name = NULL}, + { .num = 4, .type = SCARLETT_SWITCH_GAIN, .name = NULL}, + }, + + .matrix_mux_init = { + 12, 13, 14, 15, /* Analog -> 1..4 */ + 16, 17, /* SPDIF -> 5,6 */ + 0, 1, 2, 3, 4, 5, 6, 7, /* PCM[1..12] -> 7..18 */ + 8, 9, 10, 11 + } +}; + +/* untested... */ +static const struct scarlett_device_info s8i6_info = { + .matrix_in = 18, + .matrix_out = 6, + .input_len = 8, + .output_len = 6, + + .opt_master = { + .start = -1, + .len = 25, + .offsets = {0, 12, 16, 18, 18}, + .names = NULL + }, + + .opt_matrix = { + .start = -1, + .len = 19, + .offsets = {0, 12, 16, 18, 18}, + .names = NULL + }, + + .num_controls = 7, + .controls = { + { .num = 0, .type = SCARLETT_OUTPUTS, .name = "Monitor" }, + { .num = 1, .type = SCARLETT_OUTPUTS, .name = "Headphone" }, + { .num = 2, .type = SCARLETT_OUTPUTS, .name = "SPDIF" }, + { .num = 1, .type = SCARLETT_SWITCH_IMPEDANCE, .name = NULL}, + { .num = 2, .type = SCARLETT_SWITCH_IMPEDANCE, .name = NULL}, + { .num = 3, .type = SCARLETT_SWITCH_PAD, .name = NULL}, + { .num = 4, .type = SCARLETT_SWITCH_PAD, .name = NULL}, + }, + + .matrix_mux_init = { + 12, 13, 14, 15, /* Analog -> 1..4 */ + 16, 17, /* SPDIF -> 5,6 */ + 0, 1, 2, 3, 4, 5, 6, 7, /* PCM[1..12] -> 7..18 */ + 8, 9, 10, 11 + } +}; + +static const struct scarlett_device_info s18i6_info = { + .matrix_in = 18, + .matrix_out = 6, + .input_len = 18, + .output_len = 6, + + .opt_master = { + .start = -1, + .len = 31, + .offsets = {0, 6, 14, 16, 24}, + .names = NULL, + }, + + .opt_matrix = { + .start = -1, + .len = 25, + .offsets = {0, 6, 14, 16, 24}, + .names = NULL, + }, + + .num_controls = 5, + .controls = { + { .num = 0, .type = SCARLETT_OUTPUTS, .name = "Monitor" }, + { .num = 1, .type = SCARLETT_OUTPUTS, .name = "Headphone" }, + { .num = 2, .type = SCARLETT_OUTPUTS, .name = "SPDIF" }, + { .num = 1, .type = SCARLETT_SWITCH_IMPEDANCE, .name = NULL}, + { .num = 2, .type = SCARLETT_SWITCH_IMPEDANCE, .name = NULL}, + }, + + .matrix_mux_init = { + 6, 7, 8, 9, 10, 11, 12, 13, /* Analog -> 1..8 */ + 16, 17, 18, 19, 20, 21, /* ADAT[1..6] -> 9..14 */ + 14, 15, /* SPDIF -> 15,16 */ + 0, 1 /* PCM[1,2] -> 17,18 */ + } +}; + +static const struct scarlett_device_info s18i8_info = { + .matrix_in = 18, + .matrix_out = 8, + .input_len = 18, + .output_len = 8, + + .opt_master = { + .start = -1, + .len = 35, + .offsets = {0, 8, 16, 18, 26}, + .names = NULL + }, + + .opt_matrix = { + .start = -1, + .len = 27, + .offsets = {0, 8, 16, 18, 26}, + .names = NULL + }, + + .num_controls = 10, + .controls = { + { .num = 0, .type = SCARLETT_OUTPUTS, .name = "Monitor" }, + { .num = 1, .type = SCARLETT_OUTPUTS, .name = "Headphone 1" }, + { .num = 2, .type = SCARLETT_OUTPUTS, .name = "Headphone 2" }, + { .num = 3, .type = SCARLETT_OUTPUTS, .name = "SPDIF" }, + { .num = 1, .type = SCARLETT_SWITCH_IMPEDANCE, .name = NULL}, + { .num = 1, .type = SCARLETT_SWITCH_PAD, .name = NULL}, + { .num = 2, .type = SCARLETT_SWITCH_IMPEDANCE, .name = NULL}, + { .num = 2, .type = SCARLETT_SWITCH_PAD, .name = NULL}, + { .num = 3, .type = SCARLETT_SWITCH_PAD, .name = NULL}, + { .num = 4, .type = SCARLETT_SWITCH_PAD, .name = NULL}, + }, + + .matrix_mux_init = { + 8, 9, 10, 11, 12, 13, 14, 15, /* Analog -> 1..8 */ + 18, 19, 20, 21, 22, 23, /* ADAT[1..6] -> 9..14 */ + 16, 17, /* SPDIF -> 15,16 */ + 0, 1 /* PCM[1,2] -> 17,18 */ + } +}; + +static const struct scarlett_device_info s18i20_info = { + .matrix_in = 18, + .matrix_out = 8, + .input_len = 18, + .output_len = 20, + + .opt_master = { + .start = -1, + .len = 47, + .offsets = {0, 20, 28, 30, 38}, + .names = NULL + }, + + .opt_matrix = { + .start = -1, + .len = 39, + .offsets = {0, 20, 28, 30, 38}, + .names = NULL + }, + + .num_controls = 10, + .controls = { + { .num = 0, .type = SCARLETT_OUTPUTS, .name = "Monitor" }, + { .num = 1, .type = SCARLETT_OUTPUTS, .name = "Line 3/4" }, + { .num = 2, .type = SCARLETT_OUTPUTS, .name = "Line 5/6" }, + { .num = 3, .type = SCARLETT_OUTPUTS, .name = "Line 7/8" }, + { .num = 4, .type = SCARLETT_OUTPUTS, .name = "Line 9/10" }, + { .num = 5, .type = SCARLETT_OUTPUTS, .name = "SPDIF" }, + { .num = 6, .type = SCARLETT_OUTPUTS, .name = "ADAT 1/2" }, + { .num = 7, .type = SCARLETT_OUTPUTS, .name = "ADAT 3/4" }, + { .num = 8, .type = SCARLETT_OUTPUTS, .name = "ADAT 5/6" }, + { .num = 9, .type = SCARLETT_OUTPUTS, .name = "ADAT 7/8" }, + /*{ .num = 1, .type = SCARLETT_SWITCH_IMPEDANCE, .name = NULL}, + { .num = 1, .type = SCARLETT_SWITCH_PAD, .name = NULL}, + { .num = 2, .type = SCARLETT_SWITCH_IMPEDANCE, .name = NULL}, + { .num = 2, .type = SCARLETT_SWITCH_PAD, .name = NULL}, + { .num = 3, .type = SCARLETT_SWITCH_PAD, .name = NULL}, + { .num = 4, .type = SCARLETT_SWITCH_PAD, .name = NULL},*/ + }, + + .matrix_mux_init = { + 20, 21, 22, 23, 24, 25, 26, 27, /* Analog -> 1..8 */ + 30, 31, 32, 33, 34, 35, /* ADAT[1..6] -> 9..14 */ + 28, 29, /* SPDIF -> 15,16 */ + 0, 1 /* PCM[1,2] -> 17,18 */ + } +}; + + +static int scarlett_controls_create_generic(struct usb_mixer_interface *mixer, + const struct scarlett_device_info *info) +{ + int i, err; + char mx[SNDRV_CTL_ELEM_ID_NAME_MAXLEN]; + const struct scarlett_mixer_control *ctl; + struct usb_mixer_elem_info *elem; + + /* create master switch and playback volume */ + err = add_new_ctl(mixer, &usb_scarlett_ctl_switch, + scarlett_ctl_resume, 0x0a, 0x01, 0, + USB_MIXER_S16, 1, "Master Playback Switch", NULL, + &elem); + if (err < 0) + return err; + + err = add_new_ctl(mixer, &usb_scarlett_ctl_master, + scarlett_ctl_resume, 0x0a, 0x02, 0, + USB_MIXER_S16, 1, "Master Playback Volume", NULL, + &elem); + if (err < 0) + return err; + + /* iterate through controls in info struct and create each one */ + for (i = 0; i < info->num_controls; i++) { + ctl = &info->controls[i]; + + switch (ctl->type) { + case SCARLETT_OUTPUTS: + err = add_output_ctls(mixer, ctl->num, ctl->name, info); + if (err < 0) + return err; + break; + case SCARLETT_SWITCH_IMPEDANCE: + sprintf(mx, "Input %d Impedance Switch", ctl->num); + err = add_new_ctl(mixer, &usb_scarlett_ctl_enum, + scarlett_ctl_enum_resume, 0x01, + 0x09, ctl->num, USB_MIXER_S16, 1, mx, + &opt_impedance, &elem); + if (err < 0) + return err; + break; + case SCARLETT_SWITCH_PAD: + sprintf(mx, "Input %d Pad Switch", ctl->num); + err = add_new_ctl(mixer, &usb_scarlett_ctl_enum, + scarlett_ctl_enum_resume, 0x01, + 0x0b, ctl->num, USB_MIXER_S16, 1, mx, + &opt_pad, &elem); + if (err < 0) + return err; + break; + case SCARLETT_SWITCH_GAIN: + sprintf(mx, "Input %d Gain Switch", ctl->num); + err = add_new_ctl(mixer, &usb_scarlett_ctl_enum, + scarlett_ctl_enum_resume, 0x01, + 0x08, ctl->num, USB_MIXER_S16, 1, mx, + &opt_gain, &elem); + if (err < 0) + return err; + break; + } + } + + return 0; +} + +/* + * Create and initialize a mixer for the Focusrite(R) Scarlett + */ +int snd_scarlett_controls_create(struct usb_mixer_interface *mixer) +{ + int err, i, o; + char mx[SNDRV_CTL_ELEM_ID_NAME_MAXLEN]; + const struct scarlett_device_info *info; + struct usb_mixer_elem_info *elem; + static char sample_rate_buffer[4] = { '\x80', '\xbb', '\x00', '\x00' }; + + /* only use UAC_VERSION_2 */ + if (!mixer->protocol) + return 0; + + switch (mixer->chip->usb_id) { + case USB_ID(0x1235, 0x8012): + info = &s6i6_info; + break; + case USB_ID(0x1235, 0x8002): + info = &s8i6_info; + break; + case USB_ID(0x1235, 0x8004): + info = &s18i6_info; + break; + case USB_ID(0x1235, 0x8014): + info = &s18i8_info; + break; + case USB_ID(0x1235, 0x800c): + info = &s18i20_info; + break; + default: /* device not (yet) supported */ + return -EINVAL; + } + + /* generic function to create controls */ + err = scarlett_controls_create_generic(mixer, info); + if (err < 0) + return err; + + /* setup matrix controls */ + for (i = 0; i < info->matrix_in; i++) { + snprintf(mx, sizeof(mx), "Matrix %02d Input Playback Route", + i+1); + err = add_new_ctl(mixer, &usb_scarlett_ctl_dynamic_enum, + scarlett_ctl_enum_resume, 0x32, + 0x06, i, USB_MIXER_S16, 1, mx, + &info->opt_matrix, &elem); + if (err < 0) + return err; + + for (o = 0; o < info->matrix_out; o++) { + sprintf(mx, "Matrix %02d Mix %c Playback Volume", i+1, + o+'A'); + err = add_new_ctl(mixer, &usb_scarlett_ctl, + scarlett_ctl_resume, 0x3c, 0x00, + (i << 3) + (o & 0x07), USB_MIXER_S16, + 1, mx, NULL, &elem); + if (err < 0) + return err; + + } + } + + for (i = 0; i < info->input_len; i++) { + snprintf(mx, sizeof(mx), "Input Source %02d Capture Route", + i+1); + err = add_new_ctl(mixer, &usb_scarlett_ctl_dynamic_enum, + scarlett_ctl_enum_resume, 0x34, + 0x00, i, USB_MIXER_S16, 1, mx, + &info->opt_master, &elem); + if (err < 0) + return err; + } + + /* val_len == 1 needed here */ + err = add_new_ctl(mixer, &usb_scarlett_ctl_enum, + scarlett_ctl_enum_resume, 0x28, 0x01, 0, + USB_MIXER_U8, 1, "Sample Clock Source", + &opt_clock, &elem); + if (err < 0) + return err; + + /* val_len == 1 and UAC2_CS_MEM */ + err = add_new_ctl(mixer, &usb_scarlett_ctl_sync, NULL, 0x3c, 0x00, 2, + USB_MIXER_U8, 1, "Sample Clock Sync Status", + &opt_sync, &elem); + if (err < 0) + return err; + + /* initialize sampling rate to 48000 */ + err = snd_usb_ctl_msg(mixer->chip->dev, + usb_sndctrlpipe(mixer->chip->dev, 0), UAC2_CS_CUR, + USB_RECIP_INTERFACE | USB_TYPE_CLASS | + USB_DIR_OUT, 0x0100, snd_usb_ctrl_intf(mixer->chip) | + (0x29 << 8), sample_rate_buffer, 4); + if (err < 0) + return err; + + return err; +} |