diff options
Diffstat (limited to '')
130 files changed, 45020 insertions, 0 deletions
diff --git a/tools/power/acpi/.gitignore b/tools/power/acpi/.gitignore new file mode 100644 index 000000000..0b319fc8b --- /dev/null +++ b/tools/power/acpi/.gitignore @@ -0,0 +1,5 @@ +# SPDX-License-Identifier: GPL-2.0-only +/acpidbg +/acpidump +/ec +/include/ diff --git a/tools/power/acpi/Makefile b/tools/power/acpi/Makefile new file mode 100644 index 000000000..a249c50eb --- /dev/null +++ b/tools/power/acpi/Makefile @@ -0,0 +1,26 @@ +# SPDX-License-Identifier: GPL-2.0-only +# tools/power/acpi/Makefile - ACPI tool Makefile +# +# Copyright (c) 2013, Intel Corporation +# Author: Lv Zheng <lv.zheng@intel.com> +# + +include ../../scripts/Makefile.include + +.NOTPARALLEL: + +all: acpidbg acpidump ec +clean: acpidbg_clean acpidump_clean ec_clean +install: acpidbg_install acpidump_install ec_install +uninstall: acpidbg_uninstall acpidump_uninstall ec_uninstall + +acpidbg acpidump ec: FORCE + $(call descend,tools/$@,all) +acpidbg_clean acpidump_clean ec_clean: + $(call descend,tools/$(@:_clean=),clean) +acpidbg_install acpidump_install ec_install: + $(call descend,tools/$(@:_install=),install) +acpidbg_uninstall acpidump_uninstall ec_uninstall: + $(call descend,tools/$(@:_uninstall=),uninstall) + +.PHONY: FORCE diff --git a/tools/power/acpi/Makefile.config b/tools/power/acpi/Makefile.config new file mode 100644 index 000000000..331f6d30f --- /dev/null +++ b/tools/power/acpi/Makefile.config @@ -0,0 +1,88 @@ +# SPDX-License-Identifier: GPL-2.0-only +# tools/power/acpi/Makefile.config - ACPI tool Makefile +# +# Copyright (c) 2015, Intel Corporation +# Author: Lv Zheng <lv.zheng@intel.com> +# + +ifeq ($(srctree),) +srctree := $(patsubst %/,%,$(dir $(shell pwd))) +srctree := $(patsubst %/,%,$(dir $(srctree))) +#$(info Determined 'srctree' to be $(srctree)) +endif + +include $(srctree)/../../scripts/Makefile.include + +OUTPUT=$(srctree)/ +ifeq ("$(origin O)", "command line") + OUTPUT := $(O)/tools/power/acpi/ +endif +#$(info Determined 'OUTPUT' to be $(OUTPUT)) + +# --- CONFIGURATION BEGIN --- + +# Set the following to `true' to make a unstripped, unoptimized +# binary. Leave this set to `false' for production use. +DEBUG ?= true + +# make the build silent. Set this to something else to make it noisy again. +V ?= false + +# Prefix to the directories we're installing to +DESTDIR ?= + +# --- CONFIGURATION END --- + +# Directory definitions. These are default and most probably +# do not need to be changed. Please note that DESTDIR is +# added in front of any of them + +bindir ?= /usr/bin +sbindir ?= /usr/sbin +mandir ?= /usr/man + +# Toolchain: what tools do we use, and what options do they need: + +INSTALL = /usr/bin/install -c +INSTALL_PROGRAM = ${INSTALL} +INSTALL_DATA = ${INSTALL} -m 644 +INSTALL_SCRIPT = ${INSTALL_PROGRAM} + +# If you are running a cross compiler, you may want to set this +# to something more interesting, like "arm-linux-". If you want +# to compile vs uClibc, that can be done here as well. +CROSS = #/usr/i386-linux-uclibc/usr/bin/i386-uclibc- +CROSS_COMPILE ?= $(CROSS) +LD = $(CC) + +# check if compiler option is supported +cc-supports = ${shell if $(CC) ${1} -S -o /dev/null -x c /dev/null > /dev/null 2>&1; then echo "$(1)"; fi;} + +# use '-Os' optimization if available, else use -O2 +OPTIMIZATION := $(call cc-supports,-Os,-O2) + +WARNINGS := -Wall +WARNINGS += $(call cc-supports,-Wstrict-prototypes) +WARNINGS += $(call cc-supports,-Wdeclaration-after-statement) + +KERNEL_INCLUDE := $(OUTPUT)include +ACPICA_INCLUDE := $(srctree)/../../../drivers/acpi/acpica +CFLAGS += -D_LINUX -I$(KERNEL_INCLUDE) -I$(ACPICA_INCLUDE) +CFLAGS += $(WARNINGS) + +ifeq ($(strip $(V)),false) + QUIET=@ + ECHO=@echo +else + QUIET= + ECHO=@\# +endif + +# if DEBUG is enabled, then we do not strip or optimize +ifeq ($(strip $(DEBUG)),true) + CFLAGS += -O1 -g -DDEBUG + STRIPCMD = /bin/true -Since_we_are_debugging +else + CFLAGS += $(OPTIMIZATION) -fomit-frame-pointer + STRIPCMD = $(STRIP) -s --remove-section=.note --remove-section=.comment +endif diff --git a/tools/power/acpi/Makefile.rules b/tools/power/acpi/Makefile.rules new file mode 100644 index 000000000..2a6c170b5 --- /dev/null +++ b/tools/power/acpi/Makefile.rules @@ -0,0 +1,48 @@ +# SPDX-License-Identifier: GPL-2.0-only +# tools/power/acpi/Makefile.rules - ACPI tool Makefile +# +# Copyright (c) 2015, Intel Corporation +# Author: Lv Zheng <lv.zheng@intel.com> +# + +objdir := $(OUTPUT)tools/$(TOOL)/ +toolobjs := $(addprefix $(objdir),$(TOOL_OBJS)) +$(OUTPUT)$(TOOL): $(toolobjs) FORCE + $(ECHO) " LD " $(subst $(OUTPUT),,$@) + $(QUIET) $(LD) $(CFLAGS) $(LDFLAGS) $(toolobjs) -L$(OUTPUT) -o $@ + $(ECHO) " STRIP " $(subst $(OUTPUT),,$@) + $(QUIET) $(STRIPCMD) $@ + +$(KERNEL_INCLUDE): + $(ECHO) " MKDIR " $(subst $(OUTPUT),,$@) + $(QUIET) mkdir -p $(KERNEL_INCLUDE) + $(ECHO) " CP " $(subst $(OUTPUT),,$@) + $(QUIET) cp -rf $(srctree)/../../../include/acpi $(KERNEL_INCLUDE)/ + +$(objdir)%.o: %.c $(KERNEL_INCLUDE) + $(ECHO) " CC " $(subst $(OUTPUT),,$@) + $(QUIET) $(CC) -c $(CFLAGS) -o $@ $< + +all: $(OUTPUT)$(TOOL) +clean: + $(ECHO) " RMOBJ " $(subst $(OUTPUT),,$(objdir)) + $(QUIET) find $(objdir) \( -not -type d \)\ + -and \( -name '*~' -o -name '*.[oas]' \)\ + -type f -print | xargs rm -f + $(ECHO) " RM " $(TOOL) + $(QUIET) rm -f $(OUTPUT)$(TOOL) + $(ECHO) " RMINC " $(subst $(OUTPUT),,$(KERNEL_INCLUDE)) + $(QUIET) rm -rf $(KERNEL_INCLUDE) + +install-tools: + $(ECHO) " INST " $(TOOL) + $(QUIET) $(INSTALL) -d $(DESTDIR)$(sbindir) + $(QUIET) $(INSTALL_PROGRAM) $(OUTPUT)$(TOOL) $(DESTDIR)$(sbindir) +uninstall-tools: + $(ECHO) " UNINST " $(TOOL) + $(QUIET) rm -f $(DESTDIR)$(sbindir)/$(TOOL) + +install: all install-tools $(EXTRA_INSTALL) +uninstall: uninstall-tools $(EXTRA_UNINSTALL) + +.PHONY: FORCE diff --git a/tools/power/acpi/common/cmfsize.c b/tools/power/acpi/common/cmfsize.c new file mode 100644 index 000000000..d1d18ff5c --- /dev/null +++ b/tools/power/acpi/common/cmfsize.c @@ -0,0 +1,68 @@ +// SPDX-License-Identifier: BSD-3-Clause OR GPL-2.0 +/****************************************************************************** + * + * Module Name: cfsize - Common get file size function + * + * Copyright (C) 2000 - 2020, Intel Corp. + * + *****************************************************************************/ + +#include <acpi/acpi.h> +#include "accommon.h" +#include "acapps.h" + +#define _COMPONENT ACPI_TOOLS +ACPI_MODULE_NAME("cmfsize") + +/******************************************************************************* + * + * FUNCTION: cm_get_file_size + * + * PARAMETERS: file - Open file descriptor + * + * RETURN: File Size. On error, -1 (ACPI_UINT32_MAX) + * + * DESCRIPTION: Get the size of a file. Uses seek-to-EOF. File must be open. + * Does not disturb the current file pointer. + * + ******************************************************************************/ +u32 cm_get_file_size(ACPI_FILE file) +{ + long file_size; + long current_offset; + acpi_status status; + + /* Save the current file pointer, seek to EOF to obtain file size */ + + current_offset = ftell(file); + if (current_offset < 0) { + goto offset_error; + } + + status = fseek(file, 0, SEEK_END); + if (ACPI_FAILURE(status)) { + goto seek_error; + } + + file_size = ftell(file); + if (file_size < 0) { + goto offset_error; + } + + /* Restore original file pointer */ + + status = fseek(file, current_offset, SEEK_SET); + if (ACPI_FAILURE(status)) { + goto seek_error; + } + + return ((u32)file_size); + +offset_error: + fprintf(stderr, "Could not get file offset\n"); + return (ACPI_UINT32_MAX); + +seek_error: + fprintf(stderr, "Could not set file offset\n"); + return (ACPI_UINT32_MAX); +} diff --git a/tools/power/acpi/common/getopt.c b/tools/power/acpi/common/getopt.c new file mode 100644 index 000000000..c3708f30a --- /dev/null +++ b/tools/power/acpi/common/getopt.c @@ -0,0 +1,205 @@ +// SPDX-License-Identifier: BSD-3-Clause OR GPL-2.0 +/****************************************************************************** + * + * Module Name: getopt + * + * Copyright (C) 2000 - 2020, Intel Corp. + * + *****************************************************************************/ + +/* + * ACPICA getopt() implementation + * + * Option strings: + * "f" - Option has no arguments + * "f:" - Option requires an argument + * "f+" - Option has an optional argument + * "f^" - Option has optional single-char sub-options + * "f|" - Option has required single-char sub-options + */ + +#include <acpi/acpi.h> +#include "accommon.h" +#include "acapps.h" + +#define ACPI_OPTION_ERROR(msg, badchar) \ + if (acpi_gbl_opterr) {fprintf (stderr, "%s%c\n", msg, badchar);} + +int acpi_gbl_opterr = 1; +int acpi_gbl_optind = 1; +int acpi_gbl_sub_opt_char = 0; +char *acpi_gbl_optarg; + +static int current_char_ptr = 1; + +/******************************************************************************* + * + * FUNCTION: acpi_getopt_argument + * + * PARAMETERS: argc, argv - from main + * + * RETURN: 0 if an argument was found, -1 otherwise. Sets acpi_gbl_Optarg + * to point to the next argument. + * + * DESCRIPTION: Get the next argument. Used to obtain arguments for the + * two-character options after the original call to acpi_getopt. + * Note: Either the argument starts at the next character after + * the option, or it is pointed to by the next argv entry. + * (After call to acpi_getopt, we need to backup to the previous + * argv entry). + * + ******************************************************************************/ + +int acpi_getopt_argument(int argc, char **argv) +{ + + acpi_gbl_optind--; + current_char_ptr++; + + if (argv[acpi_gbl_optind][(int)(current_char_ptr + 1)] != '\0') { + acpi_gbl_optarg = + &argv[acpi_gbl_optind++][(int)(current_char_ptr + 1)]; + } else if (++acpi_gbl_optind >= argc) { + ACPI_OPTION_ERROR("\nOption requires an argument", 0); + + current_char_ptr = 1; + return (-1); + } else { + acpi_gbl_optarg = argv[acpi_gbl_optind++]; + } + + current_char_ptr = 1; + return (0); +} + +/******************************************************************************* + * + * FUNCTION: acpi_getopt + * + * PARAMETERS: argc, argv - from main + * opts - options info list + * + * RETURN: Option character or ACPI_OPT_END + * + * DESCRIPTION: Get the next option + * + ******************************************************************************/ + +int acpi_getopt(int argc, char **argv, char *opts) +{ + int current_char; + char *opts_ptr; + + if (current_char_ptr == 1) { + if (acpi_gbl_optind >= argc || + argv[acpi_gbl_optind][0] != '-' || + argv[acpi_gbl_optind][1] == '\0') { + return (ACPI_OPT_END); + } else if (strcmp(argv[acpi_gbl_optind], "--") == 0) { + acpi_gbl_optind++; + return (ACPI_OPT_END); + } + } + + /* Get the option */ + + current_char = argv[acpi_gbl_optind][current_char_ptr]; + + /* Make sure that the option is legal */ + + if (current_char == ':' || + (opts_ptr = strchr(opts, current_char)) == NULL) { + ACPI_OPTION_ERROR("Illegal option: -", current_char); + + if (argv[acpi_gbl_optind][++current_char_ptr] == '\0') { + acpi_gbl_optind++; + current_char_ptr = 1; + } + + return ('?'); + } + + /* Option requires an argument? */ + + if (*++opts_ptr == ':') { + if (argv[acpi_gbl_optind][(int)(current_char_ptr + 1)] != '\0') { + acpi_gbl_optarg = + &argv[acpi_gbl_optind++][(int) + (current_char_ptr + 1)]; + } else if (++acpi_gbl_optind >= argc) { + ACPI_OPTION_ERROR("Option requires an argument: -", + current_char); + + current_char_ptr = 1; + return ('?'); + } else { + acpi_gbl_optarg = argv[acpi_gbl_optind++]; + } + + current_char_ptr = 1; + } + + /* Option has an optional argument? */ + + else if (*opts_ptr == '+') { + if (argv[acpi_gbl_optind][(int)(current_char_ptr + 1)] != '\0') { + acpi_gbl_optarg = + &argv[acpi_gbl_optind++][(int) + (current_char_ptr + 1)]; + } else if (++acpi_gbl_optind >= argc) { + acpi_gbl_optarg = NULL; + } else { + acpi_gbl_optarg = argv[acpi_gbl_optind++]; + } + + current_char_ptr = 1; + } + + /* Option has optional single-char arguments? */ + + else if (*opts_ptr == '^') { + if (argv[acpi_gbl_optind][(int)(current_char_ptr + 1)] != '\0') { + acpi_gbl_optarg = + &argv[acpi_gbl_optind][(int)(current_char_ptr + 1)]; + } else { + acpi_gbl_optarg = "^"; + } + + acpi_gbl_sub_opt_char = acpi_gbl_optarg[0]; + acpi_gbl_optind++; + current_char_ptr = 1; + } + + /* Option has a required single-char argument? */ + + else if (*opts_ptr == '|') { + if (argv[acpi_gbl_optind][(int)(current_char_ptr + 1)] != '\0') { + acpi_gbl_optarg = + &argv[acpi_gbl_optind][(int)(current_char_ptr + 1)]; + } else { + ACPI_OPTION_ERROR + ("Option requires a single-character suboption: -", + current_char); + + current_char_ptr = 1; + return ('?'); + } + + acpi_gbl_sub_opt_char = acpi_gbl_optarg[0]; + acpi_gbl_optind++; + current_char_ptr = 1; + } + + /* Option with no arguments */ + + else { + if (argv[acpi_gbl_optind][++current_char_ptr] == '\0') { + current_char_ptr = 1; + acpi_gbl_optind++; + } + + acpi_gbl_optarg = NULL; + } + + return (current_char); +} diff --git a/tools/power/acpi/man/acpidump.8 b/tools/power/acpi/man/acpidump.8 new file mode 100644 index 000000000..79e2d1d43 --- /dev/null +++ b/tools/power/acpi/man/acpidump.8 @@ -0,0 +1,127 @@ +.TH ACPIDUMP 8 +.SH NAME +acpidump \- dump a system's ACPI tables to an ASCII file + +.SH SYNOPSIS +.B acpidump +.RI [ options ] +.br + +.SH DESCRIPTION +.B acpidump +dumps the systems ACPI tables to an ASCII file appropriate for +attaching to a bug report. + +Subsequently, they can be processed by utilities in the ACPICA package. + +.SH OPTIONS +acpidump options are as follow: +.TP +.B Options +.TP +.B \-b +Dump tables to binary files +.TP +.B \-h \-? +This help message +.TP +.B \-o <File> +Redirect output to file +.TP +.B \-r <Address> +Dump tables from specified RSDP +.TP +.B \-s +Print table summaries only +.TP +.B \-v +Display version information +.TP +.B \-z +Verbose mode +.TP +.B Table Options +.TP +.B \-a <Address> +Get table via a physical address +.TP +.B \-c <on|off> +Turning on/off customized table dumping +.TP +.B \-f <BinaryFile> +Get table via a binary file +.TP +.B \-n <Signature> +Get table via a name/signature +.TP +.B \-x +Do not use but dump XSDT +.TP +.B \-x \-x +Do not use or dump XSDT +.TP +.fi +Invocation without parameters dumps all available tables. +.TP +Multiple mixed instances of -a, -f, and -n are supported. + +.SH EXAMPLES + +.nf +# acpidump > acpidump.out + +$ acpixtract -a acpidump.out + Acpi table [DSDT] - 15974 bytes written to DSDT.dat + Acpi table [FACS] - 64 bytes written to FACS.dat + Acpi table [FACP] - 116 bytes written to FACP.dat + Acpi table [APIC] - 120 bytes written to APIC.dat + Acpi table [MCFG] - 60 bytes written to MCFG.dat + Acpi table [SSDT] - 444 bytes written to SSDT1.dat + Acpi table [SSDT] - 439 bytes written to SSDT2.dat + Acpi table [SSDT] - 439 bytes written to SSDT3.dat + Acpi table [SSDT] - 439 bytes written to SSDT4.dat + Acpi table [SSDT] - 439 bytes written to SSDT5.dat + Acpi table [RSDT] - 76 bytes written to RSDT.dat + Acpi table [RSDP] - 20 bytes written to RSDP.dat + +$ iasl -d *.dat +... +.fi +creates *.dsl, a human readable form which can be edited +and compiled using iasl. + + +.SH NOTES + +.B "acpidump " +must be run as root. + +.SH REFERENCES +ACPICA: https://acpica.org/ + +.SH FILES +.ta +.nf +/dev/mem +/sys/firmware/acpi/tables/* +/sys/firmware/acpi/tables/dynamic/* +/sys/firmware/efi/systab +.fi + +.SH AUTHOR +.TP +Original by: + Len Brown <len.brown@intel.com> +.TP +Written by: + Chao Guan <chao.guan@intel.com> +.TP +Updated by: + Bob Moore <robert.moore@intel.com> + Lv Zheng <lv.zheng@intel.com> + +.SH SEE ALSO +\&\fIacpixtract\fR\|(8), \fIiasl\fR\|(8). + +.SH COPYRIGHT +COPYRIGHT (c) 2013, Intel Corporation. diff --git a/tools/power/acpi/os_specific/service_layers/oslinuxtbl.c b/tools/power/acpi/os_specific/service_layers/oslinuxtbl.c new file mode 100644 index 000000000..11c5046dc --- /dev/null +++ b/tools/power/acpi/os_specific/service_layers/oslinuxtbl.c @@ -0,0 +1,1373 @@ +// SPDX-License-Identifier: BSD-3-Clause OR GPL-2.0 +/****************************************************************************** + * + * Module Name: oslinuxtbl - Linux OSL for obtaining ACPI tables + * + * Copyright (C) 2000 - 2020, Intel Corp. + * + *****************************************************************************/ + +#include "acpidump.h" + +#define _COMPONENT ACPI_OS_SERVICES +ACPI_MODULE_NAME("oslinuxtbl") + +#ifndef PATH_MAX +#define PATH_MAX 256 +#endif +/* List of information about obtained ACPI tables */ +typedef struct osl_table_info { + struct osl_table_info *next; + u32 instance; + char signature[ACPI_NAMESEG_SIZE]; + +} osl_table_info; + +/* Local prototypes */ + +static acpi_status osl_table_initialize(void); + +static acpi_status +osl_table_name_from_file(char *filename, char *signature, u32 *instance); + +static acpi_status osl_add_table_to_list(char *signature, u32 instance); + +static acpi_status +osl_read_table_from_file(char *filename, + acpi_size file_offset, + struct acpi_table_header **table); + +static acpi_status +osl_map_table(acpi_size address, + char *signature, struct acpi_table_header **table); + +static void osl_unmap_table(struct acpi_table_header *table); + +static acpi_physical_address +osl_find_rsdp_via_efi_by_keyword(FILE * file, const char *keyword); + +static acpi_physical_address osl_find_rsdp_via_efi(void); + +static acpi_status osl_load_rsdp(void); + +static acpi_status osl_list_customized_tables(char *directory); + +static acpi_status +osl_get_customized_table(char *pathname, + char *signature, + u32 instance, + struct acpi_table_header **table, + acpi_physical_address *address); + +static acpi_status osl_list_bios_tables(void); + +static acpi_status +osl_get_bios_table(char *signature, + u32 instance, + struct acpi_table_header **table, + acpi_physical_address *address); + +static acpi_status osl_get_last_status(acpi_status default_status); + +/* File locations */ + +#define DYNAMIC_TABLE_DIR "/sys/firmware/acpi/tables/dynamic" +#define STATIC_TABLE_DIR "/sys/firmware/acpi/tables" +#define EFI_SYSTAB "/sys/firmware/efi/systab" + +/* Should we get dynamically loaded SSDTs from DYNAMIC_TABLE_DIR? */ + +u8 gbl_dump_dynamic_tables = TRUE; + +/* Initialization flags */ + +u8 gbl_table_list_initialized = FALSE; + +/* Local copies of main ACPI tables */ + +struct acpi_table_rsdp gbl_rsdp; +struct acpi_table_fadt *gbl_fadt = NULL; +struct acpi_table_rsdt *gbl_rsdt = NULL; +struct acpi_table_xsdt *gbl_xsdt = NULL; + +/* Table addresses */ + +acpi_physical_address gbl_fadt_address = 0; +acpi_physical_address gbl_rsdp_address = 0; + +/* Revision of RSD PTR */ + +u8 gbl_revision = 0; + +struct osl_table_info *gbl_table_list_head = NULL; +u32 gbl_table_count = 0; + +/****************************************************************************** + * + * FUNCTION: osl_get_last_status + * + * PARAMETERS: default_status - Default error status to return + * + * RETURN: Status; Converted from errno. + * + * DESCRIPTION: Get last errno and convert it to acpi_status. + * + *****************************************************************************/ + +static acpi_status osl_get_last_status(acpi_status default_status) +{ + + switch (errno) { + case EACCES: + case EPERM: + + return (AE_ACCESS); + + case ENOENT: + + return (AE_NOT_FOUND); + + case ENOMEM: + + return (AE_NO_MEMORY); + + default: + + return (default_status); + } +} + +/****************************************************************************** + * + * FUNCTION: acpi_os_get_table_by_address + * + * PARAMETERS: address - Physical address of the ACPI table + * table - Where a pointer to the table is returned + * + * RETURN: Status; Table buffer is returned if AE_OK. + * AE_NOT_FOUND: A valid table was not found at the address + * + * DESCRIPTION: Get an ACPI table via a physical memory address. + * + *****************************************************************************/ + +acpi_status +acpi_os_get_table_by_address(acpi_physical_address address, + struct acpi_table_header **table) +{ + u32 table_length; + struct acpi_table_header *mapped_table; + struct acpi_table_header *local_table = NULL; + acpi_status status = AE_OK; + + /* Get main ACPI tables from memory on first invocation of this function */ + + status = osl_table_initialize(); + if (ACPI_FAILURE(status)) { + return (status); + } + + /* Map the table and validate it */ + + status = osl_map_table(address, NULL, &mapped_table); + if (ACPI_FAILURE(status)) { + return (status); + } + + /* Copy table to local buffer and return it */ + + table_length = ap_get_table_length(mapped_table); + if (table_length == 0) { + status = AE_BAD_HEADER; + goto exit; + } + + local_table = calloc(1, table_length); + if (!local_table) { + status = AE_NO_MEMORY; + goto exit; + } + + memcpy(local_table, mapped_table, table_length); + +exit: + osl_unmap_table(mapped_table); + *table = local_table; + return (status); +} + +/****************************************************************************** + * + * FUNCTION: acpi_os_get_table_by_name + * + * PARAMETERS: signature - ACPI Signature for desired table. Must be + * a null terminated 4-character string. + * instance - Multiple table support for SSDT/UEFI (0...n) + * Must be 0 for other tables. + * table - Where a pointer to the table is returned + * address - Where the table physical address is returned + * + * RETURN: Status; Table buffer and physical address returned if AE_OK. + * AE_LIMIT: Instance is beyond valid limit + * AE_NOT_FOUND: A table with the signature was not found + * + * NOTE: Assumes the input signature is uppercase. + * + *****************************************************************************/ + +acpi_status +acpi_os_get_table_by_name(char *signature, + u32 instance, + struct acpi_table_header **table, + acpi_physical_address *address) +{ + acpi_status status; + + /* Get main ACPI tables from memory on first invocation of this function */ + + status = osl_table_initialize(); + if (ACPI_FAILURE(status)) { + return (status); + } + + /* Not a main ACPI table, attempt to extract it from the RSDT/XSDT */ + + if (!gbl_dump_customized_tables) { + + /* Attempt to get the table from the memory */ + + status = + osl_get_bios_table(signature, instance, table, address); + } else { + /* Attempt to get the table from the static directory */ + + status = osl_get_customized_table(STATIC_TABLE_DIR, signature, + instance, table, address); + } + + if (ACPI_FAILURE(status) && status == AE_LIMIT) { + if (gbl_dump_dynamic_tables) { + + /* Attempt to get a dynamic table */ + + status = + osl_get_customized_table(DYNAMIC_TABLE_DIR, + signature, instance, table, + address); + } + } + + return (status); +} + +/****************************************************************************** + * + * FUNCTION: osl_add_table_to_list + * + * PARAMETERS: signature - Table signature + * instance - Table instance + * + * RETURN: Status; Successfully added if AE_OK. + * AE_NO_MEMORY: Memory allocation error + * + * DESCRIPTION: Insert a table structure into OSL table list. + * + *****************************************************************************/ + +static acpi_status osl_add_table_to_list(char *signature, u32 instance) +{ + struct osl_table_info *new_info; + struct osl_table_info *next; + u32 next_instance = 0; + u8 found = FALSE; + + new_info = calloc(1, sizeof(struct osl_table_info)); + if (!new_info) { + return (AE_NO_MEMORY); + } + + ACPI_COPY_NAMESEG(new_info->signature, signature); + + if (!gbl_table_list_head) { + gbl_table_list_head = new_info; + } else { + next = gbl_table_list_head; + while (1) { + if (ACPI_COMPARE_NAMESEG(next->signature, signature)) { + if (next->instance == instance) { + found = TRUE; + } + if (next->instance >= next_instance) { + next_instance = next->instance + 1; + } + } + + if (!next->next) { + break; + } + next = next->next; + } + next->next = new_info; + } + + if (found) { + if (instance) { + fprintf(stderr, + "%4.4s: Warning unmatched table instance %d, expected %d\n", + signature, instance, next_instance); + } + instance = next_instance; + } + + new_info->instance = instance; + gbl_table_count++; + + return (AE_OK); +} + +/****************************************************************************** + * + * FUNCTION: acpi_os_get_table_by_index + * + * PARAMETERS: index - Which table to get + * table - Where a pointer to the table is returned + * instance - Where a pointer to the table instance no. is + * returned + * address - Where the table physical address is returned + * + * RETURN: Status; Table buffer and physical address returned if AE_OK. + * AE_LIMIT: Index is beyond valid limit + * + * DESCRIPTION: Get an ACPI table via an index value (0 through n). Returns + * AE_LIMIT when an invalid index is reached. Index is not + * necessarily an index into the RSDT/XSDT. + * + *****************************************************************************/ + +acpi_status +acpi_os_get_table_by_index(u32 index, + struct acpi_table_header **table, + u32 *instance, acpi_physical_address *address) +{ + struct osl_table_info *info; + acpi_status status; + u32 i; + + /* Get main ACPI tables from memory on first invocation of this function */ + + status = osl_table_initialize(); + if (ACPI_FAILURE(status)) { + return (status); + } + + /* Validate Index */ + + if (index >= gbl_table_count) { + return (AE_LIMIT); + } + + /* Point to the table list entry specified by the Index argument */ + + info = gbl_table_list_head; + for (i = 0; i < index; i++) { + info = info->next; + } + + /* Now we can just get the table via the signature */ + + status = acpi_os_get_table_by_name(info->signature, info->instance, + table, address); + + if (ACPI_SUCCESS(status)) { + *instance = info->instance; + } + return (status); +} + +/****************************************************************************** + * + * FUNCTION: osl_find_rsdp_via_efi_by_keyword + * + * PARAMETERS: keyword - Character string indicating ACPI GUID version + * in the EFI table + * + * RETURN: RSDP address if found + * + * DESCRIPTION: Find RSDP address via EFI using keyword indicating the ACPI + * GUID version. + * + *****************************************************************************/ + +static acpi_physical_address +osl_find_rsdp_via_efi_by_keyword(FILE * file, const char *keyword) +{ + char buffer[80]; + unsigned long long address = 0; + char format[32]; + + snprintf(format, 32, "%s=%s", keyword, "%llx"); + fseek(file, 0, SEEK_SET); + while (fgets(buffer, 80, file)) { + if (sscanf(buffer, format, &address) == 1) { + break; + } + } + + return ((acpi_physical_address)(address)); +} + +/****************************************************************************** + * + * FUNCTION: osl_find_rsdp_via_efi + * + * PARAMETERS: None + * + * RETURN: RSDP address if found + * + * DESCRIPTION: Find RSDP address via EFI. + * + *****************************************************************************/ + +static acpi_physical_address osl_find_rsdp_via_efi(void) +{ + FILE *file; + acpi_physical_address address = 0; + + file = fopen(EFI_SYSTAB, "r"); + if (file) { + address = osl_find_rsdp_via_efi_by_keyword(file, "ACPI20"); + if (!address) { + address = + osl_find_rsdp_via_efi_by_keyword(file, "ACPI"); + } + fclose(file); + } + + return (address); +} + +/****************************************************************************** + * + * FUNCTION: osl_load_rsdp + * + * PARAMETERS: None + * + * RETURN: Status + * + * DESCRIPTION: Scan and load RSDP. + * + *****************************************************************************/ + +static acpi_status osl_load_rsdp(void) +{ + struct acpi_table_header *mapped_table; + u8 *rsdp_address; + acpi_physical_address rsdp_base; + acpi_size rsdp_size; + + /* Get RSDP from memory */ + + rsdp_size = sizeof(struct acpi_table_rsdp); + if (gbl_rsdp_base) { + rsdp_base = gbl_rsdp_base; + } else { + rsdp_base = osl_find_rsdp_via_efi(); + } + + if (!rsdp_base) { + rsdp_base = ACPI_HI_RSDP_WINDOW_BASE; + rsdp_size = ACPI_HI_RSDP_WINDOW_SIZE; + } + + rsdp_address = acpi_os_map_memory(rsdp_base, rsdp_size); + if (!rsdp_address) { + return (osl_get_last_status(AE_BAD_ADDRESS)); + } + + /* Search low memory for the RSDP */ + + mapped_table = ACPI_CAST_PTR(struct acpi_table_header, + acpi_tb_scan_memory_for_rsdp(rsdp_address, + rsdp_size)); + if (!mapped_table) { + acpi_os_unmap_memory(rsdp_address, rsdp_size); + return (AE_NOT_FOUND); + } + + gbl_rsdp_address = + rsdp_base + (ACPI_CAST8(mapped_table) - rsdp_address); + + memcpy(&gbl_rsdp, mapped_table, sizeof(struct acpi_table_rsdp)); + acpi_os_unmap_memory(rsdp_address, rsdp_size); + + return (AE_OK); +} + +/****************************************************************************** + * + * FUNCTION: osl_can_use_xsdt + * + * PARAMETERS: None + * + * RETURN: TRUE if XSDT is allowed to be used. + * + * DESCRIPTION: This function collects logic that can be used to determine if + * XSDT should be used instead of RSDT. + * + *****************************************************************************/ + +static u8 osl_can_use_xsdt(void) +{ + if (gbl_revision && !acpi_gbl_do_not_use_xsdt) { + return (TRUE); + } else { + return (FALSE); + } +} + +/****************************************************************************** + * + * FUNCTION: osl_table_initialize + * + * PARAMETERS: None + * + * RETURN: Status + * + * DESCRIPTION: Initialize ACPI table data. Get and store main ACPI tables to + * local variables. Main ACPI tables include RSDT, FADT, RSDT, + * and/or XSDT. + * + *****************************************************************************/ + +static acpi_status osl_table_initialize(void) +{ + acpi_status status; + acpi_physical_address address; + + if (gbl_table_list_initialized) { + return (AE_OK); + } + + if (!gbl_dump_customized_tables) { + + /* Get RSDP from memory */ + + status = osl_load_rsdp(); + if (ACPI_FAILURE(status)) { + return (status); + } + + /* Get XSDT from memory */ + + if (gbl_rsdp.revision && !gbl_do_not_dump_xsdt) { + if (gbl_xsdt) { + free(gbl_xsdt); + gbl_xsdt = NULL; + } + + gbl_revision = 2; + status = osl_get_bios_table(ACPI_SIG_XSDT, 0, + ACPI_CAST_PTR(struct + acpi_table_header + *, &gbl_xsdt), + &address); + if (ACPI_FAILURE(status)) { + return (status); + } + } + + /* Get RSDT from memory */ + + if (gbl_rsdp.rsdt_physical_address) { + if (gbl_rsdt) { + free(gbl_rsdt); + gbl_rsdt = NULL; + } + + status = osl_get_bios_table(ACPI_SIG_RSDT, 0, + ACPI_CAST_PTR(struct + acpi_table_header + *, &gbl_rsdt), + &address); + if (ACPI_FAILURE(status)) { + return (status); + } + } + + /* Get FADT from memory */ + + if (gbl_fadt) { + free(gbl_fadt); + gbl_fadt = NULL; + } + + status = osl_get_bios_table(ACPI_SIG_FADT, 0, + ACPI_CAST_PTR(struct + acpi_table_header *, + &gbl_fadt), + &gbl_fadt_address); + if (ACPI_FAILURE(status)) { + return (status); + } + + /* Add mandatory tables to global table list first */ + + status = osl_add_table_to_list(ACPI_RSDP_NAME, 0); + if (ACPI_FAILURE(status)) { + return (status); + } + + status = osl_add_table_to_list(ACPI_SIG_RSDT, 0); + if (ACPI_FAILURE(status)) { + return (status); + } + + if (gbl_revision == 2) { + status = osl_add_table_to_list(ACPI_SIG_XSDT, 0); + if (ACPI_FAILURE(status)) { + return (status); + } + } + + status = osl_add_table_to_list(ACPI_SIG_DSDT, 0); + if (ACPI_FAILURE(status)) { + return (status); + } + + status = osl_add_table_to_list(ACPI_SIG_FACS, 0); + if (ACPI_FAILURE(status)) { + return (status); + } + + /* Add all tables found in the memory */ + + status = osl_list_bios_tables(); + if (ACPI_FAILURE(status)) { + return (status); + } + } else { + /* Add all tables found in the static directory */ + + status = osl_list_customized_tables(STATIC_TABLE_DIR); + if (ACPI_FAILURE(status)) { + return (status); + } + } + + if (gbl_dump_dynamic_tables) { + + /* Add all dynamically loaded tables in the dynamic directory */ + + status = osl_list_customized_tables(DYNAMIC_TABLE_DIR); + if (ACPI_FAILURE(status)) { + return (status); + } + } + + gbl_table_list_initialized = TRUE; + return (AE_OK); +} + +/****************************************************************************** + * + * FUNCTION: osl_list_bios_tables + * + * PARAMETERS: None + * + * RETURN: Status; Table list is initialized if AE_OK. + * + * DESCRIPTION: Add ACPI tables to the table list from memory. + * + * NOTE: This works on Linux as table customization does not modify the + * addresses stored in RSDP/RSDT/XSDT/FADT. + * + *****************************************************************************/ + +static acpi_status osl_list_bios_tables(void) +{ + struct acpi_table_header *mapped_table = NULL; + u8 *table_data; + u8 number_of_tables; + u8 item_size; + acpi_physical_address table_address = 0; + acpi_status status = AE_OK; + u32 i; + + if (osl_can_use_xsdt()) { + item_size = sizeof(u64); + table_data = + ACPI_CAST8(gbl_xsdt) + sizeof(struct acpi_table_header); + number_of_tables = + (u8)((gbl_xsdt->header.length - + sizeof(struct acpi_table_header)) + / item_size); + } else { /* Use RSDT if XSDT is not available */ + + item_size = sizeof(u32); + table_data = + ACPI_CAST8(gbl_rsdt) + sizeof(struct acpi_table_header); + number_of_tables = + (u8)((gbl_rsdt->header.length - + sizeof(struct acpi_table_header)) + / item_size); + } + + /* Search RSDT/XSDT for the requested table */ + + for (i = 0; i < number_of_tables; ++i, table_data += item_size) { + if (osl_can_use_xsdt()) { + table_address = + (acpi_physical_address)(*ACPI_CAST64(table_data)); + } else { + table_address = + (acpi_physical_address)(*ACPI_CAST32(table_data)); + } + + /* Skip NULL entries in RSDT/XSDT */ + + if (table_address == 0) { + continue; + } + + status = osl_map_table(table_address, NULL, &mapped_table); + if (ACPI_FAILURE(status)) { + return (status); + } + + osl_add_table_to_list(mapped_table->signature, 0); + osl_unmap_table(mapped_table); + } + + return (AE_OK); +} + +/****************************************************************************** + * + * FUNCTION: osl_get_bios_table + * + * PARAMETERS: signature - ACPI Signature for common table. Must be + * a null terminated 4-character string. + * instance - Multiple table support for SSDT/UEFI (0...n) + * Must be 0 for other tables. + * table - Where a pointer to the table is returned + * address - Where the table physical address is returned + * + * RETURN: Status; Table buffer and physical address returned if AE_OK. + * AE_LIMIT: Instance is beyond valid limit + * AE_NOT_FOUND: A table with the signature was not found + * + * DESCRIPTION: Get a BIOS provided ACPI table + * + * NOTE: Assumes the input signature is uppercase. + * + *****************************************************************************/ + +static acpi_status +osl_get_bios_table(char *signature, + u32 instance, + struct acpi_table_header **table, + acpi_physical_address *address) +{ + struct acpi_table_header *local_table = NULL; + struct acpi_table_header *mapped_table = NULL; + u8 *table_data; + u8 number_of_tables; + u8 item_size; + u32 current_instance = 0; + acpi_physical_address table_address; + acpi_physical_address first_table_address = 0; + u32 table_length = 0; + acpi_status status = AE_OK; + u32 i; + + /* Handle special tables whose addresses are not in RSDT/XSDT */ + + if (ACPI_COMPARE_NAMESEG(signature, ACPI_RSDP_NAME) || + ACPI_COMPARE_NAMESEG(signature, ACPI_SIG_RSDT) || + ACPI_COMPARE_NAMESEG(signature, ACPI_SIG_XSDT) || + ACPI_COMPARE_NAMESEG(signature, ACPI_SIG_DSDT) || + ACPI_COMPARE_NAMESEG(signature, ACPI_SIG_FACS)) { + +find_next_instance: + + table_address = 0; + + /* + * Get the appropriate address, either 32-bit or 64-bit. Be very + * careful about the FADT length and validate table addresses. + * Note: The 64-bit addresses have priority. + */ + if (ACPI_COMPARE_NAMESEG(signature, ACPI_SIG_DSDT)) { + if (current_instance < 2) { + if ((gbl_fadt->header.length >= + MIN_FADT_FOR_XDSDT) && gbl_fadt->Xdsdt + && current_instance == 0) { + table_address = + (acpi_physical_address)gbl_fadt-> + Xdsdt; + } else + if ((gbl_fadt->header.length >= + MIN_FADT_FOR_DSDT) + && gbl_fadt->dsdt != + first_table_address) { + table_address = + (acpi_physical_address)gbl_fadt-> + dsdt; + } + } + } else if (ACPI_COMPARE_NAMESEG(signature, ACPI_SIG_FACS)) { + if (current_instance < 2) { + if ((gbl_fadt->header.length >= + MIN_FADT_FOR_XFACS) && gbl_fadt->Xfacs + && current_instance == 0) { + table_address = + (acpi_physical_address)gbl_fadt-> + Xfacs; + } else + if ((gbl_fadt->header.length >= + MIN_FADT_FOR_FACS) + && gbl_fadt->facs != + first_table_address) { + table_address = + (acpi_physical_address)gbl_fadt-> + facs; + } + } + } else if (ACPI_COMPARE_NAMESEG(signature, ACPI_SIG_XSDT)) { + if (!gbl_revision) { + return (AE_BAD_SIGNATURE); + } + if (current_instance == 0) { + table_address = + (acpi_physical_address)gbl_rsdp. + xsdt_physical_address; + } + } else if (ACPI_COMPARE_NAMESEG(signature, ACPI_SIG_RSDT)) { + if (current_instance == 0) { + table_address = + (acpi_physical_address)gbl_rsdp. + rsdt_physical_address; + } + } else { + if (current_instance == 0) { + table_address = + (acpi_physical_address)gbl_rsdp_address; + signature = ACPI_SIG_RSDP; + } + } + + if (table_address == 0) { + goto exit_find_table; + } + + /* Now we can get the requested special table */ + + status = osl_map_table(table_address, signature, &mapped_table); + if (ACPI_FAILURE(status)) { + return (status); + } + + table_length = ap_get_table_length(mapped_table); + if (first_table_address == 0) { + first_table_address = table_address; + } + + /* Match table instance */ + + if (current_instance != instance) { + osl_unmap_table(mapped_table); + mapped_table = NULL; + current_instance++; + goto find_next_instance; + } + } else { /* Case for a normal ACPI table */ + + if (osl_can_use_xsdt()) { + item_size = sizeof(u64); + table_data = + ACPI_CAST8(gbl_xsdt) + + sizeof(struct acpi_table_header); + number_of_tables = + (u8)((gbl_xsdt->header.length - + sizeof(struct acpi_table_header)) + / item_size); + } else { /* Use RSDT if XSDT is not available */ + + item_size = sizeof(u32); + table_data = + ACPI_CAST8(gbl_rsdt) + + sizeof(struct acpi_table_header); + number_of_tables = + (u8)((gbl_rsdt->header.length - + sizeof(struct acpi_table_header)) + / item_size); + } + + /* Search RSDT/XSDT for the requested table */ + + for (i = 0; i < number_of_tables; ++i, table_data += item_size) { + if (osl_can_use_xsdt()) { + table_address = + (acpi_physical_address)(*ACPI_CAST64 + (table_data)); + } else { + table_address = + (acpi_physical_address)(*ACPI_CAST32 + (table_data)); + } + + /* Skip NULL entries in RSDT/XSDT */ + + if (table_address == 0) { + continue; + } + + status = + osl_map_table(table_address, NULL, &mapped_table); + if (ACPI_FAILURE(status)) { + return (status); + } + table_length = mapped_table->length; + + /* Does this table match the requested signature? */ + + if (!ACPI_COMPARE_NAMESEG + (mapped_table->signature, signature)) { + osl_unmap_table(mapped_table); + mapped_table = NULL; + continue; + } + + /* Match table instance (for SSDT/UEFI tables) */ + + if (current_instance != instance) { + osl_unmap_table(mapped_table); + mapped_table = NULL; + current_instance++; + continue; + } + + break; + } + } + +exit_find_table: + + if (!mapped_table) { + return (AE_LIMIT); + } + + if (table_length == 0) { + status = AE_BAD_HEADER; + goto exit; + } + + /* Copy table to local buffer and return it */ + + local_table = calloc(1, table_length); + if (!local_table) { + status = AE_NO_MEMORY; + goto exit; + } + + memcpy(local_table, mapped_table, table_length); + *address = table_address; + *table = local_table; + +exit: + osl_unmap_table(mapped_table); + return (status); +} + +/****************************************************************************** + * + * FUNCTION: osl_list_customized_tables + * + * PARAMETERS: directory - Directory that contains the tables + * + * RETURN: Status; Table list is initialized if AE_OK. + * + * DESCRIPTION: Add ACPI tables to the table list from a directory. + * + *****************************************************************************/ + +static acpi_status osl_list_customized_tables(char *directory) +{ + void *table_dir; + u32 instance; + char temp_name[ACPI_NAMESEG_SIZE]; + char *filename; + acpi_status status = AE_OK; + + /* Open the requested directory */ + + table_dir = acpi_os_open_directory(directory, "*", REQUEST_FILE_ONLY); + if (!table_dir) { + return (osl_get_last_status(AE_NOT_FOUND)); + } + + /* Examine all entries in this directory */ + + while ((filename = acpi_os_get_next_filename(table_dir))) { + + /* Extract table name and instance number */ + + status = + osl_table_name_from_file(filename, temp_name, &instance); + + /* Ignore meaningless files */ + + if (ACPI_FAILURE(status)) { + continue; + } + + /* Add new info node to global table list */ + + status = osl_add_table_to_list(temp_name, instance); + if (ACPI_FAILURE(status)) { + break; + } + } + + acpi_os_close_directory(table_dir); + return (status); +} + +/****************************************************************************** + * + * FUNCTION: osl_map_table + * + * PARAMETERS: address - Address of the table in memory + * signature - Optional ACPI Signature for desired table. + * Null terminated 4-character string. + * table - Where a pointer to the mapped table is + * returned + * + * RETURN: Status; Mapped table is returned if AE_OK. + * AE_NOT_FOUND: A valid table was not found at the address + * + * DESCRIPTION: Map entire ACPI table into caller's address space. + * + *****************************************************************************/ + +static acpi_status +osl_map_table(acpi_size address, + char *signature, struct acpi_table_header **table) +{ + struct acpi_table_header *mapped_table; + u32 length; + + if (!address) { + return (AE_BAD_ADDRESS); + } + + /* + * Map the header so we can get the table length. + * Use sizeof (struct acpi_table_header) as: + * 1. it is bigger than 24 to include RSDP->Length + * 2. it is smaller than sizeof (struct acpi_table_rsdp) + */ + mapped_table = + acpi_os_map_memory(address, sizeof(struct acpi_table_header)); + if (!mapped_table) { + fprintf(stderr, "Could not map table header at 0x%8.8X%8.8X\n", + ACPI_FORMAT_UINT64(address)); + return (osl_get_last_status(AE_BAD_ADDRESS)); + } + + /* If specified, signature must match */ + + if (signature) { + if (ACPI_VALIDATE_RSDP_SIG(signature)) { + if (!ACPI_VALIDATE_RSDP_SIG(mapped_table->signature)) { + acpi_os_unmap_memory(mapped_table, + sizeof(struct + acpi_table_header)); + return (AE_BAD_SIGNATURE); + } + } else + if (!ACPI_COMPARE_NAMESEG + (signature, mapped_table->signature)) { + acpi_os_unmap_memory(mapped_table, + sizeof(struct acpi_table_header)); + return (AE_BAD_SIGNATURE); + } + } + + /* Map the entire table */ + + length = ap_get_table_length(mapped_table); + acpi_os_unmap_memory(mapped_table, sizeof(struct acpi_table_header)); + if (length == 0) { + return (AE_BAD_HEADER); + } + + mapped_table = acpi_os_map_memory(address, length); + if (!mapped_table) { + fprintf(stderr, + "Could not map table at 0x%8.8X%8.8X length %8.8X\n", + ACPI_FORMAT_UINT64(address), length); + return (osl_get_last_status(AE_INVALID_TABLE_LENGTH)); + } + + (void)ap_is_valid_checksum(mapped_table); + + *table = mapped_table; + return (AE_OK); +} + +/****************************************************************************** + * + * FUNCTION: osl_unmap_table + * + * PARAMETERS: table - A pointer to the mapped table + * + * RETURN: None + * + * DESCRIPTION: Unmap entire ACPI table. + * + *****************************************************************************/ + +static void osl_unmap_table(struct acpi_table_header *table) +{ + if (table) { + acpi_os_unmap_memory(table, ap_get_table_length(table)); + } +} + +/****************************************************************************** + * + * FUNCTION: osl_table_name_from_file + * + * PARAMETERS: filename - File that contains the desired table + * signature - Pointer to 4-character buffer to store + * extracted table signature. + * instance - Pointer to integer to store extracted + * table instance number. + * + * RETURN: Status; Table name is extracted if AE_OK. + * + * DESCRIPTION: Extract table signature and instance number from a table file + * name. + * + *****************************************************************************/ + +static acpi_status +osl_table_name_from_file(char *filename, char *signature, u32 *instance) +{ + + /* Ignore meaningless files */ + + if (strlen(filename) < ACPI_NAMESEG_SIZE) { + return (AE_BAD_SIGNATURE); + } + + /* Extract instance number */ + + if (isdigit((int)filename[ACPI_NAMESEG_SIZE])) { + sscanf(&filename[ACPI_NAMESEG_SIZE], "%u", instance); + } else if (strlen(filename) != ACPI_NAMESEG_SIZE) { + return (AE_BAD_SIGNATURE); + } else { + *instance = 0; + } + + /* Extract signature */ + + ACPI_COPY_NAMESEG(signature, filename); + return (AE_OK); +} + +/****************************************************************************** + * + * FUNCTION: osl_read_table_from_file + * + * PARAMETERS: filename - File that contains the desired table + * file_offset - Offset of the table in file + * table - Where a pointer to the table is returned + * + * RETURN: Status; Table buffer is returned if AE_OK. + * + * DESCRIPTION: Read a ACPI table from a file. + * + *****************************************************************************/ + +static acpi_status +osl_read_table_from_file(char *filename, + acpi_size file_offset, + struct acpi_table_header **table) +{ + FILE *table_file; + struct acpi_table_header header; + struct acpi_table_header *local_table = NULL; + u32 table_length; + s32 count; + acpi_status status = AE_OK; + + /* Open the file */ + + table_file = fopen(filename, "rb"); + if (table_file == NULL) { + fprintf(stderr, "Could not open table file: %s\n", filename); + return (osl_get_last_status(AE_NOT_FOUND)); + } + + fseek(table_file, file_offset, SEEK_SET); + + /* Read the Table header to get the table length */ + + count = fread(&header, 1, sizeof(struct acpi_table_header), table_file); + if (count != sizeof(struct acpi_table_header)) { + fprintf(stderr, "Could not read table header: %s\n", filename); + status = AE_BAD_HEADER; + goto exit; + } + +#ifdef ACPI_OBSOLETE_FUNCTIONS + + /* If signature is specified, it must match the table */ + + if (signature) { + if (ACPI_VALIDATE_RSDP_SIG(signature)) { + if (!ACPI_VALIDATE_RSDP_SIG(header.signature)) { + fprintf(stderr, + "Incorrect RSDP signature: found %8.8s\n", + header.signature); + status = AE_BAD_SIGNATURE; + goto exit; + } + } else if (!ACPI_COMPARE_NAMESEG(signature, header.signature)) { + fprintf(stderr, + "Incorrect signature: Expecting %4.4s, found %4.4s\n", + signature, header.signature); + status = AE_BAD_SIGNATURE; + goto exit; + } + } +#endif + + table_length = ap_get_table_length(&header); + if (table_length == 0) { + status = AE_BAD_HEADER; + goto exit; + } + + /* Read the entire table into a local buffer */ + + local_table = calloc(1, table_length); + if (!local_table) { + fprintf(stderr, + "%4.4s: Could not allocate buffer for table of length %X\n", + header.signature, table_length); + status = AE_NO_MEMORY; + goto exit; + } + + fseek(table_file, file_offset, SEEK_SET); + + count = fread(local_table, 1, table_length, table_file); + if (count != table_length) { + fprintf(stderr, "%4.4s: Could not read table content\n", + header.signature); + status = AE_INVALID_TABLE_LENGTH; + goto exit; + } + + /* Validate checksum */ + + (void)ap_is_valid_checksum(local_table); + +exit: + fclose(table_file); + *table = local_table; + return (status); +} + +/****************************************************************************** + * + * FUNCTION: osl_get_customized_table + * + * PARAMETERS: pathname - Directory to find Linux customized table + * signature - ACPI Signature for desired table. Must be + * a null terminated 4-character string. + * instance - Multiple table support for SSDT/UEFI (0...n) + * Must be 0 for other tables. + * table - Where a pointer to the table is returned + * address - Where the table physical address is returned + * + * RETURN: Status; Table buffer is returned if AE_OK. + * AE_LIMIT: Instance is beyond valid limit + * AE_NOT_FOUND: A table with the signature was not found + * + * DESCRIPTION: Get an OS customized table. + * + *****************************************************************************/ + +static acpi_status +osl_get_customized_table(char *pathname, + char *signature, + u32 instance, + struct acpi_table_header **table, + acpi_physical_address *address) +{ + void *table_dir; + u32 current_instance = 0; + char temp_name[ACPI_NAMESEG_SIZE]; + char table_filename[PATH_MAX]; + char *filename; + acpi_status status; + + /* Open the directory for customized tables */ + + table_dir = acpi_os_open_directory(pathname, "*", REQUEST_FILE_ONLY); + if (!table_dir) { + return (osl_get_last_status(AE_NOT_FOUND)); + } + + /* Attempt to find the table in the directory */ + + while ((filename = acpi_os_get_next_filename(table_dir))) { + + /* Ignore meaningless files */ + + if (!ACPI_COMPARE_NAMESEG(filename, signature)) { + continue; + } + + /* Extract table name and instance number */ + + status = + osl_table_name_from_file(filename, temp_name, + ¤t_instance); + + /* Ignore meaningless files */ + + if (ACPI_FAILURE(status) || current_instance != instance) { + continue; + } + + /* Create the table pathname */ + + if (instance != 0) { + sprintf(table_filename, "%s/%4.4s%d", pathname, + temp_name, instance); + } else { + sprintf(table_filename, "%s/%4.4s", pathname, + temp_name); + } + break; + } + + acpi_os_close_directory(table_dir); + + if (!filename) { + return (AE_LIMIT); + } + + /* There is no physical address saved for customized tables, use zero */ + + *address = 0; + status = osl_read_table_from_file(table_filename, 0, table); + + return (status); +} diff --git a/tools/power/acpi/os_specific/service_layers/osunixdir.c b/tools/power/acpi/os_specific/service_layers/osunixdir.c new file mode 100644 index 000000000..fd05ddee2 --- /dev/null +++ b/tools/power/acpi/os_specific/service_layers/osunixdir.c @@ -0,0 +1,170 @@ +// SPDX-License-Identifier: BSD-3-Clause OR GPL-2.0 +/****************************************************************************** + * + * Module Name: osunixdir - Unix directory access interfaces + * + * Copyright (C) 2000 - 2020, Intel Corp. + * + *****************************************************************************/ + +#include <acpi/acpi.h> + +#include <stdio.h> +#include <stdlib.h> +#include <string.h> +#include <dirent.h> +#include <fnmatch.h> +#include <ctype.h> +#include <sys/stat.h> + +/* + * Allocated structure returned from os_open_directory + */ +typedef struct external_find_info { + char *dir_pathname; + DIR *dir_ptr; + char temp_buffer[256]; + char *wildcard_spec; + char requested_file_type; + +} external_find_info; + +/******************************************************************************* + * + * FUNCTION: acpi_os_open_directory + * + * PARAMETERS: dir_pathname - Full pathname to the directory + * wildcard_spec - string of the form "*.c", etc. + * + * RETURN: A directory "handle" to be used in subsequent search operations. + * NULL returned on failure. + * + * DESCRIPTION: Open a directory in preparation for a wildcard search + * + ******************************************************************************/ + +void *acpi_os_open_directory(char *dir_pathname, + char *wildcard_spec, char requested_file_type) +{ + struct external_find_info *external_info; + DIR *dir; + + /* Allocate the info struct that will be returned to the caller */ + + external_info = calloc(1, sizeof(struct external_find_info)); + if (!external_info) { + return (NULL); + } + + /* Get the directory stream */ + + dir = opendir(dir_pathname); + if (!dir) { + fprintf(stderr, "Cannot open directory - %s\n", dir_pathname); + free(external_info); + return (NULL); + } + + /* Save the info in the return structure */ + + external_info->wildcard_spec = wildcard_spec; + external_info->requested_file_type = requested_file_type; + external_info->dir_pathname = dir_pathname; + external_info->dir_ptr = dir; + return (external_info); +} + +/******************************************************************************* + * + * FUNCTION: acpi_os_get_next_filename + * + * PARAMETERS: dir_handle - Created via acpi_os_open_directory + * + * RETURN: Next filename matched. NULL if no more matches. + * + * DESCRIPTION: Get the next file in the directory that matches the wildcard + * specification. + * + ******************************************************************************/ + +char *acpi_os_get_next_filename(void *dir_handle) +{ + struct external_find_info *external_info = dir_handle; + struct dirent *dir_entry; + char *temp_str; + int str_len; + struct stat temp_stat; + int err; + + while ((dir_entry = readdir(external_info->dir_ptr))) { + if (!fnmatch + (external_info->wildcard_spec, dir_entry->d_name, 0)) { + if (dir_entry->d_name[0] == '.') { + continue; + } + + str_len = strlen(dir_entry->d_name) + + strlen(external_info->dir_pathname) + 2; + + temp_str = calloc(str_len, 1); + if (!temp_str) { + fprintf(stderr, + "Could not allocate buffer for temporary string\n"); + return (NULL); + } + + strcpy(temp_str, external_info->dir_pathname); + strcat(temp_str, "/"); + strcat(temp_str, dir_entry->d_name); + + err = stat(temp_str, &temp_stat); + if (err == -1) { + fprintf(stderr, + "Cannot stat file (should not happen) - %s\n", + temp_str); + free(temp_str); + return (NULL); + } + + free(temp_str); + + if ((S_ISDIR(temp_stat.st_mode) + && (external_info->requested_file_type == + REQUEST_DIR_ONLY)) + || ((!S_ISDIR(temp_stat.st_mode) + && external_info->requested_file_type == + REQUEST_FILE_ONLY))) { + + /* copy to a temp buffer because dir_entry struct is on the stack */ + + strcpy(external_info->temp_buffer, + dir_entry->d_name); + return (external_info->temp_buffer); + } + } + } + + return (NULL); +} + +/******************************************************************************* + * + * FUNCTION: acpi_os_close_directory + * + * PARAMETERS: dir_handle - Created via acpi_os_open_directory + * + * RETURN: None. + * + * DESCRIPTION: Close the open directory and cleanup. + * + ******************************************************************************/ + +void acpi_os_close_directory(void *dir_handle) +{ + struct external_find_info *external_info = dir_handle; + + /* Close the directory and free allocations */ + + closedir(external_info->dir_ptr); + free(dir_handle); +} diff --git a/tools/power/acpi/os_specific/service_layers/osunixmap.c b/tools/power/acpi/os_specific/service_layers/osunixmap.c new file mode 100644 index 000000000..c565546e8 --- /dev/null +++ b/tools/power/acpi/os_specific/service_layers/osunixmap.c @@ -0,0 +1,117 @@ +// SPDX-License-Identifier: BSD-3-Clause OR GPL-2.0 +/****************************************************************************** + * + * Module Name: osunixmap - Unix OSL for file mappings + * + * Copyright (C) 2000 - 2020, Intel Corp. + * + *****************************************************************************/ + +#include "acpidump.h" +#include <unistd.h> +#include <sys/mman.h> +#ifdef _free_BSD +#include <sys/param.h> +#endif + +#define _COMPONENT ACPI_OS_SERVICES +ACPI_MODULE_NAME("osunixmap") + +#ifndef O_BINARY +#define O_BINARY 0 +#endif +#if defined(_dragon_fly) || defined(_free_BSD) || defined(_QNX) +#define MMAP_FLAGS MAP_SHARED +#else +#define MMAP_FLAGS MAP_PRIVATE +#endif +#define SYSTEM_MEMORY "/dev/mem" +/******************************************************************************* + * + * FUNCTION: acpi_os_get_page_size + * + * PARAMETERS: None + * + * RETURN: Page size of the platform. + * + * DESCRIPTION: Obtain page size of the platform. + * + ******************************************************************************/ +static acpi_size acpi_os_get_page_size(void) +{ + +#ifdef PAGE_SIZE + return PAGE_SIZE; +#else + return sysconf(_SC_PAGESIZE); +#endif +} + +/****************************************************************************** + * + * FUNCTION: acpi_os_map_memory + * + * PARAMETERS: where - Physical address of memory to be mapped + * length - How much memory to map + * + * RETURN: Pointer to mapped memory. Null on error. + * + * DESCRIPTION: Map physical memory into local address space. + * + *****************************************************************************/ + +void *acpi_os_map_memory(acpi_physical_address where, acpi_size length) +{ + u8 *mapped_memory; + acpi_physical_address offset; + acpi_size page_size; + int fd; + + fd = open(SYSTEM_MEMORY, O_RDONLY | O_BINARY); + if (fd < 0) { + fprintf(stderr, "Cannot open %s\n", SYSTEM_MEMORY); + return (NULL); + } + + /* Align the offset to use mmap */ + + page_size = acpi_os_get_page_size(); + offset = where % page_size; + + /* Map the table header to get the length of the full table */ + + mapped_memory = mmap(NULL, (length + offset), PROT_READ, MMAP_FLAGS, + fd, (where - offset)); + if (mapped_memory == MAP_FAILED) { + fprintf(stderr, "Cannot map %s\n", SYSTEM_MEMORY); + close(fd); + return (NULL); + } + + close(fd); + return (ACPI_CAST8(mapped_memory + offset)); +} + +/****************************************************************************** + * + * FUNCTION: acpi_os_unmap_memory + * + * PARAMETERS: where - Logical address of memory to be unmapped + * length - How much memory to unmap + * + * RETURN: None. + * + * DESCRIPTION: Delete a previously created mapping. Where and Length must + * correspond to a previous mapping exactly. + * + *****************************************************************************/ + +void acpi_os_unmap_memory(void *where, acpi_size length) +{ + acpi_physical_address offset; + acpi_size page_size; + + page_size = acpi_os_get_page_size(); + offset = ACPI_TO_INTEGER(where) % page_size; + munmap((u8 *)where - offset, (length + offset)); +} diff --git a/tools/power/acpi/os_specific/service_layers/osunixxf.c b/tools/power/acpi/os_specific/service_layers/osunixxf.c new file mode 100644 index 000000000..5b2fd9685 --- /dev/null +++ b/tools/power/acpi/os_specific/service_layers/osunixxf.c @@ -0,0 +1,1317 @@ +// SPDX-License-Identifier: BSD-3-Clause OR GPL-2.0 +/****************************************************************************** + * + * Module Name: osunixxf - UNIX OSL interfaces + * + * Copyright (C) 2000 - 2020, Intel Corp. + * + *****************************************************************************/ + +/* + * These interfaces are required in order to compile the ASL compiler and the + * various ACPICA tools under Linux or other Unix-like system. + */ +#include <acpi/acpi.h> +#include "accommon.h" +#include "amlcode.h" +#include "acparser.h" +#include "acdebug.h" + +#include <stdio.h> +#include <stdlib.h> +#include <stdarg.h> +#include <unistd.h> +#include <sys/time.h> +#include <semaphore.h> +#include <pthread.h> +#include <errno.h> + +#define _COMPONENT ACPI_OS_SERVICES +ACPI_MODULE_NAME("osunixxf") + +/* Upcalls to acpi_exec */ +void +ae_table_override(struct acpi_table_header *existing_table, + struct acpi_table_header **new_table); + +typedef void *(*PTHREAD_CALLBACK) (void *); + +/* Buffer used by acpi_os_vprintf */ + +#define ACPI_VPRINTF_BUFFER_SIZE 512 +#define _ASCII_NEWLINE '\n' + +/* Terminal support for acpi_exec only */ + +#ifdef ACPI_EXEC_APP +#include <termios.h> + +struct termios original_term_attributes; +int term_attributes_were_set = 0; + +acpi_status acpi_ut_read_line(char *buffer, u32 buffer_length, u32 *bytes_read); + +static void os_enter_line_edit_mode(void); + +static void os_exit_line_edit_mode(void); + +/****************************************************************************** + * + * FUNCTION: os_enter_line_edit_mode, os_exit_line_edit_mode + * + * PARAMETERS: None + * + * RETURN: None + * + * DESCRIPTION: Enter/Exit the raw character input mode for the terminal. + * + * Interactive line-editing support for the AML debugger. Used with the + * common/acgetline module. + * + * readline() is not used because of non-portability. It is not available + * on all systems, and if it is, often the package must be manually installed. + * + * Therefore, we use the POSIX tcgetattr/tcsetattr and do the minimal line + * editing that we need in acpi_os_get_line. + * + * If the POSIX tcgetattr/tcsetattr interfaces are unavailable, these + * calls will also work: + * For os_enter_line_edit_mode: system ("stty cbreak -echo") + * For os_exit_line_edit_mode: system ("stty cooked echo") + * + *****************************************************************************/ + +static void os_enter_line_edit_mode(void) +{ + struct termios local_term_attributes; + + term_attributes_were_set = 0; + + /* STDIN must be a terminal */ + + if (!isatty(STDIN_FILENO)) { + return; + } + + /* Get and keep the original attributes */ + + if (tcgetattr(STDIN_FILENO, &original_term_attributes)) { + fprintf(stderr, "Could not get terminal attributes!\n"); + return; + } + + /* Set the new attributes to enable raw character input */ + + memcpy(&local_term_attributes, &original_term_attributes, + sizeof(struct termios)); + + local_term_attributes.c_lflag &= ~(ICANON | ECHO); + local_term_attributes.c_cc[VMIN] = 1; + local_term_attributes.c_cc[VTIME] = 0; + + if (tcsetattr(STDIN_FILENO, TCSANOW, &local_term_attributes)) { + fprintf(stderr, "Could not set terminal attributes!\n"); + return; + } + + term_attributes_were_set = 1; +} + +static void os_exit_line_edit_mode(void) +{ + + if (!term_attributes_were_set) { + return; + } + + /* Set terminal attributes back to the original values */ + + if (tcsetattr(STDIN_FILENO, TCSANOW, &original_term_attributes)) { + fprintf(stderr, "Could not restore terminal attributes!\n"); + } +} + +#else + +/* These functions are not needed for other ACPICA utilities */ + +#define os_enter_line_edit_mode() +#define os_exit_line_edit_mode() +#endif + +/****************************************************************************** + * + * FUNCTION: acpi_os_initialize, acpi_os_terminate + * + * PARAMETERS: None + * + * RETURN: Status + * + * DESCRIPTION: Initialize and terminate this module. + * + *****************************************************************************/ + +acpi_status acpi_os_initialize(void) +{ + acpi_status status; + + acpi_gbl_output_file = stdout; + + os_enter_line_edit_mode(); + + status = acpi_os_create_lock(&acpi_gbl_print_lock); + if (ACPI_FAILURE(status)) { + return (status); + } + + return (AE_OK); +} + +acpi_status acpi_os_terminate(void) +{ + + os_exit_line_edit_mode(); + return (AE_OK); +} + +#ifndef ACPI_USE_NATIVE_RSDP_POINTER +/****************************************************************************** + * + * FUNCTION: acpi_os_get_root_pointer + * + * PARAMETERS: None + * + * RETURN: RSDP physical address + * + * DESCRIPTION: Gets the ACPI root pointer (RSDP) + * + *****************************************************************************/ + +acpi_physical_address acpi_os_get_root_pointer(void) +{ + + return (0); +} +#endif + +/****************************************************************************** + * + * FUNCTION: acpi_os_predefined_override + * + * PARAMETERS: init_val - Initial value of the predefined object + * new_val - The new value for the object + * + * RETURN: Status, pointer to value. Null pointer returned if not + * overriding. + * + * DESCRIPTION: Allow the OS to override predefined names + * + *****************************************************************************/ + +acpi_status +acpi_os_predefined_override(const struct acpi_predefined_names *init_val, + acpi_string *new_val) +{ + + if (!init_val || !new_val) { + return (AE_BAD_PARAMETER); + } + + *new_val = NULL; + return (AE_OK); +} + +/****************************************************************************** + * + * FUNCTION: acpi_os_table_override + * + * PARAMETERS: existing_table - Header of current table (probably + * firmware) + * new_table - Where an entire new table is returned. + * + * RETURN: Status, pointer to new table. Null pointer returned if no + * table is available to override + * + * DESCRIPTION: Return a different version of a table if one is available + * + *****************************************************************************/ + +acpi_status +acpi_os_table_override(struct acpi_table_header *existing_table, + struct acpi_table_header **new_table) +{ + + if (!existing_table || !new_table) { + return (AE_BAD_PARAMETER); + } + + *new_table = NULL; + +#ifdef ACPI_EXEC_APP + + ae_table_override(existing_table, new_table); + return (AE_OK); +#else + + return (AE_NO_ACPI_TABLES); +#endif +} + +/****************************************************************************** + * + * FUNCTION: acpi_os_physical_table_override + * + * PARAMETERS: existing_table - Header of current table (probably firmware) + * new_address - Where new table address is returned + * (Physical address) + * new_table_length - Where new table length is returned + * + * RETURN: Status, address/length of new table. Null pointer returned + * if no table is available to override. + * + * DESCRIPTION: Returns AE_SUPPORT, function not used in user space. + * + *****************************************************************************/ + +acpi_status +acpi_os_physical_table_override(struct acpi_table_header *existing_table, + acpi_physical_address *new_address, + u32 *new_table_length) +{ + + return (AE_SUPPORT); +} + +/****************************************************************************** + * + * FUNCTION: acpi_os_enter_sleep + * + * PARAMETERS: sleep_state - Which sleep state to enter + * rega_value - Register A value + * regb_value - Register B value + * + * RETURN: Status + * + * DESCRIPTION: A hook before writing sleep registers to enter the sleep + * state. Return AE_CTRL_TERMINATE to skip further sleep register + * writes. + * + *****************************************************************************/ + +acpi_status acpi_os_enter_sleep(u8 sleep_state, u32 rega_value, u32 regb_value) +{ + + return (AE_OK); +} + +/****************************************************************************** + * + * FUNCTION: acpi_os_redirect_output + * + * PARAMETERS: destination - An open file handle/pointer + * + * RETURN: None + * + * DESCRIPTION: Causes redirect of acpi_os_printf and acpi_os_vprintf + * + *****************************************************************************/ + +void acpi_os_redirect_output(void *destination) +{ + + acpi_gbl_output_file = destination; +} + +/****************************************************************************** + * + * FUNCTION: acpi_os_printf + * + * PARAMETERS: fmt, ... - Standard printf format + * + * RETURN: None + * + * DESCRIPTION: Formatted output. Note: very similar to acpi_os_vprintf + * (performance), changes should be tracked in both functions. + * + *****************************************************************************/ + +void ACPI_INTERNAL_VAR_XFACE acpi_os_printf(const char *fmt, ...) +{ + va_list args; + u8 flags; + + flags = acpi_gbl_db_output_flags; + if (flags & ACPI_DB_REDIRECTABLE_OUTPUT) { + + /* Output is directable to either a file (if open) or the console */ + + if (acpi_gbl_debug_file) { + + /* Output file is open, send the output there */ + + va_start(args, fmt); + vfprintf(acpi_gbl_debug_file, fmt, args); + va_end(args); + } else { + /* No redirection, send output to console (once only!) */ + + flags |= ACPI_DB_CONSOLE_OUTPUT; + } + } + + if (flags & ACPI_DB_CONSOLE_OUTPUT) { + va_start(args, fmt); + vfprintf(acpi_gbl_output_file, fmt, args); + va_end(args); + } +} + +/****************************************************************************** + * + * FUNCTION: acpi_os_vprintf + * + * PARAMETERS: fmt - Standard printf format + * args - Argument list + * + * RETURN: None + * + * DESCRIPTION: Formatted output with argument list pointer. Note: very + * similar to acpi_os_printf, changes should be tracked in both + * functions. + * + *****************************************************************************/ + +void acpi_os_vprintf(const char *fmt, va_list args) +{ + u8 flags; + char buffer[ACPI_VPRINTF_BUFFER_SIZE]; + + /* + * We build the output string in a local buffer because we may be + * outputting the buffer twice. Using vfprintf is problematic because + * some implementations modify the args pointer/structure during + * execution. Thus, we use the local buffer for portability. + * + * Note: Since this module is intended for use by the various ACPICA + * utilities/applications, we can safely declare the buffer on the stack. + * Also, This function is used for relatively small error messages only. + */ + vsnprintf(buffer, ACPI_VPRINTF_BUFFER_SIZE, fmt, args); + + flags = acpi_gbl_db_output_flags; + if (flags & ACPI_DB_REDIRECTABLE_OUTPUT) { + + /* Output is directable to either a file (if open) or the console */ + + if (acpi_gbl_debug_file) { + + /* Output file is open, send the output there */ + + fputs(buffer, acpi_gbl_debug_file); + } else { + /* No redirection, send output to console (once only!) */ + + flags |= ACPI_DB_CONSOLE_OUTPUT; + } + } + + if (flags & ACPI_DB_CONSOLE_OUTPUT) { + fputs(buffer, acpi_gbl_output_file); + } +} + +#ifndef ACPI_EXEC_APP +/****************************************************************************** + * + * FUNCTION: acpi_os_get_line + * + * PARAMETERS: buffer - Where to return the command line + * buffer_length - Maximum length of Buffer + * bytes_read - Where the actual byte count is returned + * + * RETURN: Status and actual bytes read + * + * DESCRIPTION: Get the next input line from the terminal. NOTE: For the + * acpi_exec utility, we use the acgetline module instead to + * provide line-editing and history support. + * + *****************************************************************************/ + +acpi_status acpi_os_get_line(char *buffer, u32 buffer_length, u32 *bytes_read) +{ + int input_char; + u32 end_of_line; + + /* Standard acpi_os_get_line for all utilities except acpi_exec */ + + for (end_of_line = 0;; end_of_line++) { + if (end_of_line >= buffer_length) { + return (AE_BUFFER_OVERFLOW); + } + + if ((input_char = getchar()) == EOF) { + return (AE_ERROR); + } + + if (!input_char || input_char == _ASCII_NEWLINE) { + break; + } + + buffer[end_of_line] = (char)input_char; + } + + /* Null terminate the buffer */ + + buffer[end_of_line] = 0; + + /* Return the number of bytes in the string */ + + if (bytes_read) { + *bytes_read = end_of_line; + } + + return (AE_OK); +} +#endif + +#ifndef ACPI_USE_NATIVE_MEMORY_MAPPING +/****************************************************************************** + * + * FUNCTION: acpi_os_map_memory + * + * PARAMETERS: where - Physical address of memory to be mapped + * length - How much memory to map + * + * RETURN: Pointer to mapped memory. Null on error. + * + * DESCRIPTION: Map physical memory into caller's address space + * + *****************************************************************************/ + +void *acpi_os_map_memory(acpi_physical_address where, acpi_size length) +{ + + return (ACPI_TO_POINTER((acpi_size)where)); +} + +/****************************************************************************** + * + * FUNCTION: acpi_os_unmap_memory + * + * PARAMETERS: where - Logical address of memory to be unmapped + * length - How much memory to unmap + * + * RETURN: None. + * + * DESCRIPTION: Delete a previously created mapping. Where and Length must + * correspond to a previous mapping exactly. + * + *****************************************************************************/ + +void acpi_os_unmap_memory(void *where, acpi_size length) +{ + + return; +} +#endif + +/****************************************************************************** + * + * FUNCTION: acpi_os_allocate + * + * PARAMETERS: size - Amount to allocate, in bytes + * + * RETURN: Pointer to the new allocation. Null on error. + * + * DESCRIPTION: Allocate memory. Algorithm is dependent on the OS. + * + *****************************************************************************/ + +void *acpi_os_allocate(acpi_size size) +{ + void *mem; + + mem = (void *)malloc((size_t) size); + return (mem); +} + +#ifdef USE_NATIVE_ALLOCATE_ZEROED +/****************************************************************************** + * + * FUNCTION: acpi_os_allocate_zeroed + * + * PARAMETERS: size - Amount to allocate, in bytes + * + * RETURN: Pointer to the new allocation. Null on error. + * + * DESCRIPTION: Allocate and zero memory. Algorithm is dependent on the OS. + * + *****************************************************************************/ + +void *acpi_os_allocate_zeroed(acpi_size size) +{ + void *mem; + + mem = (void *)calloc(1, (size_t) size); + return (mem); +} +#endif + +/****************************************************************************** + * + * FUNCTION: acpi_os_free + * + * PARAMETERS: mem - Pointer to previously allocated memory + * + * RETURN: None. + * + * DESCRIPTION: Free memory allocated via acpi_os_allocate + * + *****************************************************************************/ + +void acpi_os_free(void *mem) +{ + + free(mem); +} + +#ifdef ACPI_SINGLE_THREADED +/****************************************************************************** + * + * FUNCTION: Semaphore stub functions + * + * DESCRIPTION: Stub functions used for single-thread applications that do + * not require semaphore synchronization. Full implementations + * of these functions appear after the stubs. + * + *****************************************************************************/ + +acpi_status +acpi_os_create_semaphore(u32 max_units, + u32 initial_units, acpi_handle *out_handle) +{ + *out_handle = (acpi_handle)1; + return (AE_OK); +} + +acpi_status acpi_os_delete_semaphore(acpi_handle handle) +{ + return (AE_OK); +} + +acpi_status acpi_os_wait_semaphore(acpi_handle handle, u32 units, u16 timeout) +{ + return (AE_OK); +} + +acpi_status acpi_os_signal_semaphore(acpi_handle handle, u32 units) +{ + return (AE_OK); +} + +#else +/****************************************************************************** + * + * FUNCTION: acpi_os_create_semaphore + * + * PARAMETERS: initial_units - Units to be assigned to the new semaphore + * out_handle - Where a handle will be returned + * + * RETURN: Status + * + * DESCRIPTION: Create an OS semaphore + * + *****************************************************************************/ + +acpi_status +acpi_os_create_semaphore(u32 max_units, + u32 initial_units, acpi_handle *out_handle) +{ + sem_t *sem; + + if (!out_handle) { + return (AE_BAD_PARAMETER); + } +#ifdef __APPLE__ + { + static int semaphore_count = 0; + char semaphore_name[32]; + + snprintf(semaphore_name, sizeof(semaphore_name), "acpi_sem_%d", + semaphore_count++); + printf("%s\n", semaphore_name); + sem = + sem_open(semaphore_name, O_EXCL | O_CREAT, 0755, + initial_units); + if (!sem) { + return (AE_NO_MEMORY); + } + sem_unlink(semaphore_name); /* This just deletes the name */ + } + +#else + sem = acpi_os_allocate(sizeof(sem_t)); + if (!sem) { + return (AE_NO_MEMORY); + } + + if (sem_init(sem, 0, initial_units) == -1) { + acpi_os_free(sem); + return (AE_BAD_PARAMETER); + } +#endif + + *out_handle = (acpi_handle)sem; + return (AE_OK); +} + +/****************************************************************************** + * + * FUNCTION: acpi_os_delete_semaphore + * + * PARAMETERS: handle - Handle returned by acpi_os_create_semaphore + * + * RETURN: Status + * + * DESCRIPTION: Delete an OS semaphore + * + *****************************************************************************/ + +acpi_status acpi_os_delete_semaphore(acpi_handle handle) +{ + sem_t *sem = (sem_t *) handle; + + if (!sem) { + return (AE_BAD_PARAMETER); + } +#ifdef __APPLE__ + if (sem_close(sem) == -1) { + return (AE_BAD_PARAMETER); + } +#else + if (sem_destroy(sem) == -1) { + return (AE_BAD_PARAMETER); + } +#endif + + return (AE_OK); +} + +/****************************************************************************** + * + * FUNCTION: acpi_os_wait_semaphore + * + * PARAMETERS: handle - Handle returned by acpi_os_create_semaphore + * units - How many units to wait for + * msec_timeout - How long to wait (milliseconds) + * + * RETURN: Status + * + * DESCRIPTION: Wait for units + * + *****************************************************************************/ + +acpi_status +acpi_os_wait_semaphore(acpi_handle handle, u32 units, u16 msec_timeout) +{ + acpi_status status = AE_OK; + sem_t *sem = (sem_t *) handle; + int ret_val; +#ifndef ACPI_USE_ALTERNATE_TIMEOUT + struct timespec time; +#endif + + if (!sem) { + return (AE_BAD_PARAMETER); + } + + switch (msec_timeout) { + /* + * No Wait: + * -------- + * A zero timeout value indicates that we shouldn't wait - just + * acquire the semaphore if available otherwise return AE_TIME + * (a.k.a. 'would block'). + */ + case 0: + + if (sem_trywait(sem) == -1) { + status = (AE_TIME); + } + break; + + /* Wait Indefinitely */ + + case ACPI_WAIT_FOREVER: + + while (((ret_val = sem_wait(sem)) == -1) && (errno == EINTR)) { + continue; /* Restart if interrupted */ + } + if (ret_val != 0) { + status = (AE_TIME); + } + break; + + /* Wait with msec_timeout */ + + default: + +#ifdef ACPI_USE_ALTERNATE_TIMEOUT + /* + * Alternate timeout mechanism for environments where + * sem_timedwait is not available or does not work properly. + */ + while (msec_timeout) { + if (sem_trywait(sem) == 0) { + + /* Got the semaphore */ + return (AE_OK); + } + + if (msec_timeout >= 10) { + msec_timeout -= 10; + usleep(10 * ACPI_USEC_PER_MSEC); /* ten milliseconds */ + } else { + msec_timeout--; + usleep(ACPI_USEC_PER_MSEC); /* one millisecond */ + } + } + status = (AE_TIME); +#else + /* + * The interface to sem_timedwait is an absolute time, so we need to + * get the current time, then add in the millisecond Timeout value. + */ + if (clock_gettime(CLOCK_REALTIME, &time) == -1) { + perror("clock_gettime"); + return (AE_TIME); + } + + time.tv_sec += (msec_timeout / ACPI_MSEC_PER_SEC); + time.tv_nsec += + ((msec_timeout % ACPI_MSEC_PER_SEC) * ACPI_NSEC_PER_MSEC); + + /* Handle nanosecond overflow (field must be less than one second) */ + + if (time.tv_nsec >= ACPI_NSEC_PER_SEC) { + time.tv_sec += (time.tv_nsec / ACPI_NSEC_PER_SEC); + time.tv_nsec = (time.tv_nsec % ACPI_NSEC_PER_SEC); + } + + while (((ret_val = sem_timedwait(sem, &time)) == -1) + && (errno == EINTR)) { + continue; /* Restart if interrupted */ + + } + + if (ret_val != 0) { + if (errno != ETIMEDOUT) { + perror("sem_timedwait"); + } + status = (AE_TIME); + } +#endif + break; + } + + return (status); +} + +/****************************************************************************** + * + * FUNCTION: acpi_os_signal_semaphore + * + * PARAMETERS: handle - Handle returned by acpi_os_create_semaphore + * units - Number of units to send + * + * RETURN: Status + * + * DESCRIPTION: Send units + * + *****************************************************************************/ + +acpi_status acpi_os_signal_semaphore(acpi_handle handle, u32 units) +{ + sem_t *sem = (sem_t *) handle; + + if (!sem) { + return (AE_BAD_PARAMETER); + } + + if (sem_post(sem) == -1) { + return (AE_LIMIT); + } + + return (AE_OK); +} + +#endif /* ACPI_SINGLE_THREADED */ + +/****************************************************************************** + * + * FUNCTION: Spinlock interfaces + * + * DESCRIPTION: Map these interfaces to semaphore interfaces + * + *****************************************************************************/ + +acpi_status acpi_os_create_lock(acpi_spinlock * out_handle) +{ + + return (acpi_os_create_semaphore(1, 1, out_handle)); +} + +void acpi_os_delete_lock(acpi_spinlock handle) +{ + acpi_os_delete_semaphore(handle); +} + +acpi_cpu_flags acpi_os_acquire_lock(acpi_handle handle) +{ + acpi_os_wait_semaphore(handle, 1, 0xFFFF); + return (0); +} + +void acpi_os_release_lock(acpi_spinlock handle, acpi_cpu_flags flags) +{ + acpi_os_signal_semaphore(handle, 1); +} + +/****************************************************************************** + * + * FUNCTION: acpi_os_install_interrupt_handler + * + * PARAMETERS: interrupt_number - Level handler should respond to. + * isr - Address of the ACPI interrupt handler + * except_ptr - Where status is returned + * + * RETURN: Handle to the newly installed handler. + * + * DESCRIPTION: Install an interrupt handler. Used to install the ACPI + * OS-independent handler. + * + *****************************************************************************/ + +u32 +acpi_os_install_interrupt_handler(u32 interrupt_number, + acpi_osd_handler service_routine, + void *context) +{ + + return (AE_OK); +} + +/****************************************************************************** + * + * FUNCTION: acpi_os_remove_interrupt_handler + * + * PARAMETERS: handle - Returned when handler was installed + * + * RETURN: Status + * + * DESCRIPTION: Uninstalls an interrupt handler. + * + *****************************************************************************/ + +acpi_status +acpi_os_remove_interrupt_handler(u32 interrupt_number, + acpi_osd_handler service_routine) +{ + + return (AE_OK); +} + +/****************************************************************************** + * + * FUNCTION: acpi_os_stall + * + * PARAMETERS: microseconds - Time to sleep + * + * RETURN: Blocks until sleep is completed. + * + * DESCRIPTION: Sleep at microsecond granularity + * + *****************************************************************************/ + +void acpi_os_stall(u32 microseconds) +{ + + if (microseconds) { + usleep(microseconds); + } +} + +/****************************************************************************** + * + * FUNCTION: acpi_os_sleep + * + * PARAMETERS: milliseconds - Time to sleep + * + * RETURN: Blocks until sleep is completed. + * + * DESCRIPTION: Sleep at millisecond granularity + * + *****************************************************************************/ + +void acpi_os_sleep(u64 milliseconds) +{ + + /* Sleep for whole seconds */ + + sleep(milliseconds / ACPI_MSEC_PER_SEC); + + /* + * Sleep for remaining microseconds. + * Arg to usleep() is in usecs and must be less than 1,000,000 (1 second). + */ + usleep((milliseconds % ACPI_MSEC_PER_SEC) * ACPI_USEC_PER_MSEC); +} + +/****************************************************************************** + * + * FUNCTION: acpi_os_get_timer + * + * PARAMETERS: None + * + * RETURN: Current time in 100 nanosecond units + * + * DESCRIPTION: Get the current system time + * + *****************************************************************************/ + +u64 acpi_os_get_timer(void) +{ + struct timeval time; + + /* This timer has sufficient resolution for user-space application code */ + + gettimeofday(&time, NULL); + + /* (Seconds * 10^7 = 100ns(10^-7)) + (Microseconds(10^-6) * 10^1 = 100ns) */ + + return (((u64)time.tv_sec * ACPI_100NSEC_PER_SEC) + + ((u64)time.tv_usec * ACPI_100NSEC_PER_USEC)); +} + +/****************************************************************************** + * + * FUNCTION: acpi_os_read_pci_configuration + * + * PARAMETERS: pci_id - Seg/Bus/Dev + * pci_register - Device Register + * value - Buffer where value is placed + * width - Number of bits + * + * RETURN: Status + * + * DESCRIPTION: Read data from PCI configuration space + * + *****************************************************************************/ + +acpi_status +acpi_os_read_pci_configuration(struct acpi_pci_id *pci_id, + u32 pci_register, u64 *value, u32 width) +{ + + *value = 0; + return (AE_OK); +} + +/****************************************************************************** + * + * FUNCTION: acpi_os_write_pci_configuration + * + * PARAMETERS: pci_id - Seg/Bus/Dev + * pci_register - Device Register + * value - Value to be written + * width - Number of bits + * + * RETURN: Status. + * + * DESCRIPTION: Write data to PCI configuration space + * + *****************************************************************************/ + +acpi_status +acpi_os_write_pci_configuration(struct acpi_pci_id *pci_id, + u32 pci_register, u64 value, u32 width) +{ + + return (AE_OK); +} + +/****************************************************************************** + * + * FUNCTION: acpi_os_read_port + * + * PARAMETERS: address - Address of I/O port/register to read + * value - Where value is placed + * width - Number of bits + * + * RETURN: Value read from port + * + * DESCRIPTION: Read data from an I/O port or register + * + *****************************************************************************/ + +acpi_status acpi_os_read_port(acpi_io_address address, u32 *value, u32 width) +{ + + switch (width) { + case 8: + + *value = 0xFF; + break; + + case 16: + + *value = 0xFFFF; + break; + + case 32: + + *value = 0xFFFFFFFF; + break; + + default: + + return (AE_BAD_PARAMETER); + } + + return (AE_OK); +} + +/****************************************************************************** + * + * FUNCTION: acpi_os_write_port + * + * PARAMETERS: address - Address of I/O port/register to write + * value - Value to write + * width - Number of bits + * + * RETURN: None + * + * DESCRIPTION: Write data to an I/O port or register + * + *****************************************************************************/ + +acpi_status acpi_os_write_port(acpi_io_address address, u32 value, u32 width) +{ + + return (AE_OK); +} + +/****************************************************************************** + * + * FUNCTION: acpi_os_read_memory + * + * PARAMETERS: address - Physical Memory Address to read + * value - Where value is placed + * width - Number of bits (8,16,32, or 64) + * + * RETURN: Value read from physical memory address. Always returned + * as a 64-bit integer, regardless of the read width. + * + * DESCRIPTION: Read data from a physical memory address + * + *****************************************************************************/ + +acpi_status +acpi_os_read_memory(acpi_physical_address address, u64 *value, u32 width) +{ + + switch (width) { + case 8: + case 16: + case 32: + case 64: + + *value = 0; + break; + + default: + + return (AE_BAD_PARAMETER); + } + return (AE_OK); +} + +/****************************************************************************** + * + * FUNCTION: acpi_os_write_memory + * + * PARAMETERS: address - Physical Memory Address to write + * value - Value to write + * width - Number of bits (8,16,32, or 64) + * + * RETURN: None + * + * DESCRIPTION: Write data to a physical memory address + * + *****************************************************************************/ + +acpi_status +acpi_os_write_memory(acpi_physical_address address, u64 value, u32 width) +{ + + return (AE_OK); +} + +/****************************************************************************** + * + * FUNCTION: acpi_os_readable + * + * PARAMETERS: pointer - Area to be verified + * length - Size of area + * + * RETURN: TRUE if readable for entire length + * + * DESCRIPTION: Verify that a pointer is valid for reading + * + *****************************************************************************/ + +u8 acpi_os_readable(void *pointer, acpi_size length) +{ + + return (TRUE); +} + +/****************************************************************************** + * + * FUNCTION: acpi_os_writable + * + * PARAMETERS: pointer - Area to be verified + * length - Size of area + * + * RETURN: TRUE if writable for entire length + * + * DESCRIPTION: Verify that a pointer is valid for writing + * + *****************************************************************************/ + +u8 acpi_os_writable(void *pointer, acpi_size length) +{ + + return (TRUE); +} + +/****************************************************************************** + * + * FUNCTION: acpi_os_signal + * + * PARAMETERS: function - ACPI A signal function code + * info - Pointer to function-dependent structure + * + * RETURN: Status + * + * DESCRIPTION: Miscellaneous functions. Example implementation only. + * + *****************************************************************************/ + +acpi_status acpi_os_signal(u32 function, void *info) +{ + + switch (function) { + case ACPI_SIGNAL_FATAL: + + break; + + case ACPI_SIGNAL_BREAKPOINT: + + break; + + default: + + break; + } + + return (AE_OK); +} + +/* Optional multi-thread support */ + +#ifndef ACPI_SINGLE_THREADED +/****************************************************************************** + * + * FUNCTION: acpi_os_get_thread_id + * + * PARAMETERS: None + * + * RETURN: Id of the running thread + * + * DESCRIPTION: Get the ID of the current (running) thread + * + *****************************************************************************/ + +acpi_thread_id acpi_os_get_thread_id(void) +{ + pthread_t thread; + + thread = pthread_self(); + return (ACPI_CAST_PTHREAD_T(thread)); +} + +/****************************************************************************** + * + * FUNCTION: acpi_os_execute + * + * PARAMETERS: type - Type of execution + * function - Address of the function to execute + * context - Passed as a parameter to the function + * + * RETURN: Status. + * + * DESCRIPTION: Execute a new thread + * + *****************************************************************************/ + +acpi_status +acpi_os_execute(acpi_execute_type type, + acpi_osd_exec_callback function, void *context) +{ + pthread_t thread; + int ret; + + ret = + pthread_create(&thread, NULL, (PTHREAD_CALLBACK) function, context); + if (ret) { + acpi_os_printf("Create thread failed"); + } + return (0); +} + +#else /* ACPI_SINGLE_THREADED */ +acpi_thread_id acpi_os_get_thread_id(void) +{ + return (1); +} + +acpi_status +acpi_os_execute(acpi_execute_type type, + acpi_osd_exec_callback function, void *context) +{ + + function(context); + + return (AE_OK); +} + +#endif /* ACPI_SINGLE_THREADED */ + +/****************************************************************************** + * + * FUNCTION: acpi_os_wait_events_complete + * + * PARAMETERS: None + * + * RETURN: None + * + * DESCRIPTION: Wait for all asynchronous events to complete. This + * implementation does nothing. + * + *****************************************************************************/ + +void acpi_os_wait_events_complete(void) +{ + return; +} diff --git a/tools/power/acpi/tools/acpidbg/Makefile b/tools/power/acpi/tools/acpidbg/Makefile new file mode 100644 index 000000000..2ce0ee5d0 --- /dev/null +++ b/tools/power/acpi/tools/acpidbg/Makefile @@ -0,0 +1,22 @@ +# SPDX-License-Identifier: GPL-2.0-only +# tools/power/acpi/tools/acpidbg/Makefile - ACPI tool Makefile +# +# Copyright (c) 2015, Intel Corporation +# Author: Lv Zheng <lv.zheng@intel.com> +# + +include ../../Makefile.config + +TOOL = acpidbg +vpath %.c \ + ../../../../../drivers/acpi/acpica\ + ../../common\ + ../../os_specific/service_layers\ + . +CFLAGS += -DACPI_APPLICATION -DACPI_SINGLE_THREAD -DACPI_DEBUGGER\ + -I. +LDFLAGS += -lpthread +TOOL_OBJS = \ + acpidbg.o + +include ../../Makefile.rules diff --git a/tools/power/acpi/tools/acpidbg/acpidbg.c b/tools/power/acpi/tools/acpidbg/acpidbg.c new file mode 100644 index 000000000..3d2bfd716 --- /dev/null +++ b/tools/power/acpi/tools/acpidbg/acpidbg.c @@ -0,0 +1,441 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * ACPI AML interfacing userspace utility + * + * Copyright (C) 2015, Intel Corporation + * Authors: Lv Zheng <lv.zheng@intel.com> + */ + +#include <acpi/acpi.h> + +/* Headers not included by include/acpi/platform/aclinux.h */ +#include <unistd.h> +#include <stdio.h> +#include <stdlib.h> +#include <string.h> +#include <error.h> +#include <stdbool.h> +#include <fcntl.h> +#include <assert.h> +#include <sys/select.h> +#include "../../../../../include/linux/circ_buf.h" + +#define ACPI_AML_FILE "/sys/kernel/debug/acpi/acpidbg" +#define ACPI_AML_SEC_TICK 1 +#define ACPI_AML_USEC_PEEK 200 +#define ACPI_AML_BUF_SIZE 4096 + +#define ACPI_AML_BATCH_WRITE_CMD 0x00 /* Write command to kernel */ +#define ACPI_AML_BATCH_READ_LOG 0x01 /* Read log from kernel */ +#define ACPI_AML_BATCH_WRITE_LOG 0x02 /* Write log to console */ + +#define ACPI_AML_LOG_START 0x00 +#define ACPI_AML_PROMPT_START 0x01 +#define ACPI_AML_PROMPT_STOP 0x02 +#define ACPI_AML_LOG_STOP 0x03 +#define ACPI_AML_PROMPT_ROLL 0x04 + +#define ACPI_AML_INTERACTIVE 0x00 +#define ACPI_AML_BATCH 0x01 + +#define circ_count(circ) \ + (CIRC_CNT((circ)->head, (circ)->tail, ACPI_AML_BUF_SIZE)) +#define circ_count_to_end(circ) \ + (CIRC_CNT_TO_END((circ)->head, (circ)->tail, ACPI_AML_BUF_SIZE)) +#define circ_space(circ) \ + (CIRC_SPACE((circ)->head, (circ)->tail, ACPI_AML_BUF_SIZE)) +#define circ_space_to_end(circ) \ + (CIRC_SPACE_TO_END((circ)->head, (circ)->tail, ACPI_AML_BUF_SIZE)) + +#define acpi_aml_cmd_count() circ_count(&acpi_aml_cmd_crc) +#define acpi_aml_log_count() circ_count(&acpi_aml_log_crc) +#define acpi_aml_cmd_space() circ_space(&acpi_aml_cmd_crc) +#define acpi_aml_log_space() circ_space(&acpi_aml_log_crc) + +#define ACPI_AML_DO(_fd, _op, _buf, _ret) \ + do { \ + _ret = acpi_aml_##_op(_fd, &acpi_aml_##_buf##_crc); \ + if (_ret == 0) { \ + fprintf(stderr, \ + "%s %s pipe closed.\n", #_buf, #_op); \ + return; \ + } \ + } while (0) +#define ACPI_AML_BATCH_DO(_fd, _op, _buf, _ret) \ + do { \ + _ret = acpi_aml_##_op##_batch_##_buf(_fd, \ + &acpi_aml_##_buf##_crc); \ + if (_ret == 0) \ + return; \ + } while (0) + + +static char acpi_aml_cmd_buf[ACPI_AML_BUF_SIZE]; +static char acpi_aml_log_buf[ACPI_AML_BUF_SIZE]; +static struct circ_buf acpi_aml_cmd_crc = { + .buf = acpi_aml_cmd_buf, + .head = 0, + .tail = 0, +}; +static struct circ_buf acpi_aml_log_crc = { + .buf = acpi_aml_log_buf, + .head = 0, + .tail = 0, +}; +static const char *acpi_aml_file_path = ACPI_AML_FILE; +static unsigned long acpi_aml_mode = ACPI_AML_INTERACTIVE; +static bool acpi_aml_exit; + +static bool acpi_aml_batch_drain; +static unsigned long acpi_aml_batch_state; +static char acpi_aml_batch_prompt; +static char acpi_aml_batch_roll; +static unsigned long acpi_aml_log_state; +static char *acpi_aml_batch_cmd = NULL; +static char *acpi_aml_batch_pos = NULL; + +static int acpi_aml_set_fl(int fd, int flags) +{ + int ret; + + ret = fcntl(fd, F_GETFL, 0); + if (ret < 0) { + perror("fcntl(F_GETFL)"); + return ret; + } + flags |= ret; + ret = fcntl(fd, F_SETFL, flags); + if (ret < 0) { + perror("fcntl(F_SETFL)"); + return ret; + } + return ret; +} + +static int acpi_aml_set_fd(int fd, int maxfd, fd_set *set) +{ + if (fd > maxfd) + maxfd = fd; + FD_SET(fd, set); + return maxfd; +} + +static int acpi_aml_read(int fd, struct circ_buf *crc) +{ + char *p; + int len; + + p = &crc->buf[crc->head]; + len = circ_space_to_end(crc); + len = read(fd, p, len); + if (len < 0) + perror("read"); + else if (len > 0) + crc->head = (crc->head + len) & (ACPI_AML_BUF_SIZE - 1); + return len; +} + +static int acpi_aml_read_batch_cmd(int unused, struct circ_buf *crc) +{ + char *p; + int len; + int remained = strlen(acpi_aml_batch_pos); + + p = &crc->buf[crc->head]; + len = circ_space_to_end(crc); + if (len > remained) { + memcpy(p, acpi_aml_batch_pos, remained); + acpi_aml_batch_pos += remained; + len = remained; + } else { + memcpy(p, acpi_aml_batch_pos, len); + acpi_aml_batch_pos += len; + } + if (len > 0) + crc->head = (crc->head + len) & (ACPI_AML_BUF_SIZE - 1); + return len; +} + +static int acpi_aml_read_batch_log(int fd, struct circ_buf *crc) +{ + char *p; + int len; + int ret = 0; + + p = &crc->buf[crc->head]; + len = circ_space_to_end(crc); + while (ret < len && acpi_aml_log_state != ACPI_AML_LOG_STOP) { + if (acpi_aml_log_state == ACPI_AML_PROMPT_ROLL) { + *p = acpi_aml_batch_roll; + len = 1; + crc->head = (crc->head + 1) & (ACPI_AML_BUF_SIZE - 1); + ret += 1; + acpi_aml_log_state = ACPI_AML_LOG_START; + } else { + len = read(fd, p, 1); + if (len <= 0) { + if (len < 0) + perror("read"); + ret = len; + break; + } + } + switch (acpi_aml_log_state) { + case ACPI_AML_LOG_START: + if (*p == '\n') + acpi_aml_log_state = ACPI_AML_PROMPT_START; + crc->head = (crc->head + 1) & (ACPI_AML_BUF_SIZE - 1); + ret += 1; + break; + case ACPI_AML_PROMPT_START: + if (*p == ACPI_DEBUGGER_COMMAND_PROMPT || + *p == ACPI_DEBUGGER_EXECUTE_PROMPT) { + acpi_aml_batch_prompt = *p; + acpi_aml_log_state = ACPI_AML_PROMPT_STOP; + } else { + if (*p != '\n') + acpi_aml_log_state = ACPI_AML_LOG_START; + crc->head = (crc->head + 1) & (ACPI_AML_BUF_SIZE - 1); + ret += 1; + } + break; + case ACPI_AML_PROMPT_STOP: + if (*p == ' ') { + acpi_aml_log_state = ACPI_AML_LOG_STOP; + acpi_aml_exit = true; + } else { + /* Roll back */ + acpi_aml_log_state = ACPI_AML_PROMPT_ROLL; + acpi_aml_batch_roll = *p; + *p = acpi_aml_batch_prompt; + crc->head = (crc->head + 1) & (ACPI_AML_BUF_SIZE - 1); + ret += 1; + } + break; + default: + assert(0); + break; + } + } + return ret; +} + +static int acpi_aml_write(int fd, struct circ_buf *crc) +{ + char *p; + int len; + + p = &crc->buf[crc->tail]; + len = circ_count_to_end(crc); + len = write(fd, p, len); + if (len < 0) + perror("write"); + else if (len > 0) + crc->tail = (crc->tail + len) & (ACPI_AML_BUF_SIZE - 1); + return len; +} + +static int acpi_aml_write_batch_log(int fd, struct circ_buf *crc) +{ + char *p; + int len; + + p = &crc->buf[crc->tail]; + len = circ_count_to_end(crc); + if (!acpi_aml_batch_drain) { + len = write(fd, p, len); + if (len < 0) + perror("write"); + } + if (len > 0) + crc->tail = (crc->tail + len) & (ACPI_AML_BUF_SIZE - 1); + return len; +} + +static int acpi_aml_write_batch_cmd(int fd, struct circ_buf *crc) +{ + int len; + + len = acpi_aml_write(fd, crc); + if (circ_count_to_end(crc) == 0) + acpi_aml_batch_state = ACPI_AML_BATCH_READ_LOG; + return len; +} + +static void acpi_aml_loop(int fd) +{ + fd_set rfds; + fd_set wfds; + struct timeval tv; + int ret; + int maxfd = 0; + + if (acpi_aml_mode == ACPI_AML_BATCH) { + acpi_aml_log_state = ACPI_AML_LOG_START; + acpi_aml_batch_pos = acpi_aml_batch_cmd; + if (acpi_aml_batch_drain) + acpi_aml_batch_state = ACPI_AML_BATCH_READ_LOG; + else + acpi_aml_batch_state = ACPI_AML_BATCH_WRITE_CMD; + } + acpi_aml_exit = false; + while (!acpi_aml_exit) { + tv.tv_sec = ACPI_AML_SEC_TICK; + tv.tv_usec = 0; + FD_ZERO(&rfds); + FD_ZERO(&wfds); + + if (acpi_aml_cmd_space()) { + if (acpi_aml_mode == ACPI_AML_INTERACTIVE) + maxfd = acpi_aml_set_fd(STDIN_FILENO, maxfd, &rfds); + else if (strlen(acpi_aml_batch_pos) && + acpi_aml_batch_state == ACPI_AML_BATCH_WRITE_CMD) + ACPI_AML_BATCH_DO(STDIN_FILENO, read, cmd, ret); + } + if (acpi_aml_cmd_count() && + (acpi_aml_mode == ACPI_AML_INTERACTIVE || + acpi_aml_batch_state == ACPI_AML_BATCH_WRITE_CMD)) + maxfd = acpi_aml_set_fd(fd, maxfd, &wfds); + if (acpi_aml_log_space() && + (acpi_aml_mode == ACPI_AML_INTERACTIVE || + acpi_aml_batch_state == ACPI_AML_BATCH_READ_LOG)) + maxfd = acpi_aml_set_fd(fd, maxfd, &rfds); + if (acpi_aml_log_count()) + maxfd = acpi_aml_set_fd(STDOUT_FILENO, maxfd, &wfds); + + ret = select(maxfd+1, &rfds, &wfds, NULL, &tv); + if (ret < 0) { + perror("select"); + break; + } + if (ret > 0) { + if (FD_ISSET(STDIN_FILENO, &rfds)) + ACPI_AML_DO(STDIN_FILENO, read, cmd, ret); + if (FD_ISSET(fd, &wfds)) { + if (acpi_aml_mode == ACPI_AML_BATCH) + ACPI_AML_BATCH_DO(fd, write, cmd, ret); + else + ACPI_AML_DO(fd, write, cmd, ret); + } + if (FD_ISSET(fd, &rfds)) { + if (acpi_aml_mode == ACPI_AML_BATCH) + ACPI_AML_BATCH_DO(fd, read, log, ret); + else + ACPI_AML_DO(fd, read, log, ret); + } + if (FD_ISSET(STDOUT_FILENO, &wfds)) { + if (acpi_aml_mode == ACPI_AML_BATCH) + ACPI_AML_BATCH_DO(STDOUT_FILENO, write, log, ret); + else + ACPI_AML_DO(STDOUT_FILENO, write, log, ret); + } + } + } +} + +static bool acpi_aml_readable(int fd) +{ + fd_set rfds; + struct timeval tv; + int ret; + int maxfd = 0; + + tv.tv_sec = 0; + tv.tv_usec = ACPI_AML_USEC_PEEK; + FD_ZERO(&rfds); + maxfd = acpi_aml_set_fd(fd, maxfd, &rfds); + ret = select(maxfd+1, &rfds, NULL, NULL, &tv); + if (ret < 0) + perror("select"); + if (ret > 0 && FD_ISSET(fd, &rfds)) + return true; + return false; +} + +/* + * This is a userspace IO flush implementation, replying on the prompt + * characters and can be turned into a flush() call after kernel implements + * .flush() filesystem operation. + */ +static void acpi_aml_flush(int fd) +{ + while (acpi_aml_readable(fd)) { + acpi_aml_batch_drain = true; + acpi_aml_loop(fd); + acpi_aml_batch_drain = false; + } +} + +void usage(FILE *file, char *progname) +{ + fprintf(file, "usage: %s [-b cmd] [-f file] [-h]\n", progname); + fprintf(file, "\nOptions:\n"); + fprintf(file, " -b Specify command to be executed in batch mode\n"); + fprintf(file, " -f Specify interface file other than"); + fprintf(file, " /sys/kernel/debug/acpi/acpidbg\n"); + fprintf(file, " -h Print this help message\n"); +} + +int main(int argc, char **argv) +{ + int fd = -1; + int ch; + int len; + int ret = EXIT_SUCCESS; + + while ((ch = getopt(argc, argv, "b:f:h")) != -1) { + switch (ch) { + case 'b': + if (acpi_aml_batch_cmd) { + fprintf(stderr, "Already specify %s\n", + acpi_aml_batch_cmd); + ret = EXIT_FAILURE; + goto exit; + } + len = strlen(optarg); + acpi_aml_batch_cmd = calloc(len + 2, 1); + if (!acpi_aml_batch_cmd) { + perror("calloc"); + ret = EXIT_FAILURE; + goto exit; + } + memcpy(acpi_aml_batch_cmd, optarg, len); + acpi_aml_batch_cmd[len] = '\n'; + acpi_aml_mode = ACPI_AML_BATCH; + break; + case 'f': + acpi_aml_file_path = optarg; + break; + case 'h': + usage(stdout, argv[0]); + goto exit; + break; + case '?': + default: + usage(stderr, argv[0]); + ret = EXIT_FAILURE; + goto exit; + break; + } + } + + fd = open(acpi_aml_file_path, O_RDWR | O_NONBLOCK); + if (fd < 0) { + perror("open"); + ret = EXIT_FAILURE; + goto exit; + } + acpi_aml_set_fl(STDIN_FILENO, O_NONBLOCK); + acpi_aml_set_fl(STDOUT_FILENO, O_NONBLOCK); + + if (acpi_aml_mode == ACPI_AML_BATCH) + acpi_aml_flush(fd); + acpi_aml_loop(fd); + +exit: + if (fd >= 0) + close(fd); + if (acpi_aml_batch_cmd) + free(acpi_aml_batch_cmd); + return ret; +} diff --git a/tools/power/acpi/tools/acpidump/Makefile b/tools/power/acpi/tools/acpidump/Makefile new file mode 100644 index 000000000..1208a105a --- /dev/null +++ b/tools/power/acpi/tools/acpidump/Makefile @@ -0,0 +1,53 @@ +# SPDX-License-Identifier: GPL-2.0-only +# tools/power/acpi/tools/acpidump/Makefile - ACPI tool Makefile +# +# Copyright (c) 2015, Intel Corporation +# Author: Lv Zheng <lv.zheng@intel.com> +# + +include ../../Makefile.config + +TOOL = acpidump +EXTRA_INSTALL = install-man +EXTRA_UNINSTALL = uninstall-man + +vpath %.c \ + ../../../../../drivers/acpi/acpica\ + ./\ + ../../common\ + ../../os_specific/service_layers +CFLAGS += -DACPI_DUMP_APP -I. +TOOL_OBJS = \ + apdump.o\ + apfiles.o\ + apmain.o\ + osunixdir.o\ + osunixmap.o\ + osunixxf.o\ + tbprint.o\ + tbxfroot.o\ + utascii.o\ + utbuffer.o\ + utdebug.o\ + utexcep.o\ + utglobal.o\ + uthex.o\ + utmath.o\ + utnonansi.o\ + utprint.o\ + utstring.o\ + utstrsuppt.o\ + utstrtoul64.o\ + utxferror.o\ + oslinuxtbl.o\ + cmfsize.o\ + getopt.o + +include ../../Makefile.rules + +install-man: $(srctree)/man/acpidump.8 + $(ECHO) " INST " acpidump.8 + $(QUIET) $(INSTALL_DATA) -D $< $(DESTDIR)$(mandir)/man8/acpidump.8 +uninstall-man: + $(ECHO) " UNINST " acpidump.8 + $(QUIET) rm -f $(DESTDIR)$(mandir)/man8/acpidump.8 diff --git a/tools/power/acpi/tools/acpidump/acpidump.h b/tools/power/acpi/tools/acpidump/acpidump.h new file mode 100644 index 000000000..26a5eae9f --- /dev/null +++ b/tools/power/acpi/tools/acpidump/acpidump.h @@ -0,0 +1,85 @@ +/* SPDX-License-Identifier: BSD-3-Clause OR GPL-2.0 */ +/****************************************************************************** + * + * Module Name: acpidump.h - Include file for acpi_dump utility + * + * Copyright (C) 2000 - 2020, Intel Corp. + * + *****************************************************************************/ + +/* + * Global variables. Defined in main.c only, externed in all other files + */ +#ifdef _DECLARE_GLOBALS +#define EXTERN +#define INIT_GLOBAL(a,b) a=b +#else +#define EXTERN extern +#define INIT_GLOBAL(a,b) a +#endif + +#include <acpi/acpi.h> +#include "accommon.h" +#include "actables.h" +#include "acapps.h" + +/* Globals */ + +EXTERN u8 INIT_GLOBAL(gbl_summary_mode, FALSE); +EXTERN u8 INIT_GLOBAL(gbl_verbose_mode, FALSE); +EXTERN u8 INIT_GLOBAL(gbl_binary_mode, FALSE); +EXTERN u8 INIT_GLOBAL(gbl_dump_customized_tables, TRUE); +EXTERN u8 INIT_GLOBAL(gbl_do_not_dump_xsdt, FALSE); +EXTERN ACPI_FILE INIT_GLOBAL(gbl_output_file, NULL); +EXTERN char INIT_GLOBAL(*gbl_output_filename, NULL); +EXTERN u64 INIT_GLOBAL(gbl_rsdp_base, 0); + +/* Action table used to defer requested options */ + +struct ap_dump_action { + char *argument; + u32 to_be_done; +}; + +#define AP_MAX_ACTIONS 32 + +#define AP_DUMP_ALL_TABLES 0 +#define AP_DUMP_TABLE_BY_ADDRESS 1 +#define AP_DUMP_TABLE_BY_NAME 2 +#define AP_DUMP_TABLE_BY_FILE 3 + +#define AP_MAX_ACPI_FILES 256 /* Prevent infinite loops */ + +/* Minimum FADT sizes for various table addresses */ + +#define MIN_FADT_FOR_DSDT (ACPI_FADT_OFFSET (dsdt) + sizeof (u32)) +#define MIN_FADT_FOR_FACS (ACPI_FADT_OFFSET (facs) + sizeof (u32)) +#define MIN_FADT_FOR_XDSDT (ACPI_FADT_OFFSET (Xdsdt) + sizeof (u64)) +#define MIN_FADT_FOR_XFACS (ACPI_FADT_OFFSET (Xfacs) + sizeof (u64)) + +/* + * apdump - Table get/dump routines + */ +int ap_dump_table_from_file(char *pathname); + +int ap_dump_table_by_name(char *signature); + +int ap_dump_table_by_address(char *ascii_address); + +int ap_dump_all_tables(void); + +u8 ap_is_valid_header(struct acpi_table_header *table); + +u8 ap_is_valid_checksum(struct acpi_table_header *table); + +u32 ap_get_table_length(struct acpi_table_header *table); + +/* + * apfiles - File I/O utilities + */ +int ap_open_output_file(char *pathname); + +int ap_write_to_binary_file(struct acpi_table_header *table, u32 instance); + +struct acpi_table_header *ap_get_table_from_file(char *pathname, + u32 *file_size); diff --git a/tools/power/acpi/tools/acpidump/apdump.c b/tools/power/acpi/tools/acpidump/apdump.c new file mode 100644 index 000000000..764332960 --- /dev/null +++ b/tools/power/acpi/tools/acpidump/apdump.c @@ -0,0 +1,402 @@ +// SPDX-License-Identifier: BSD-3-Clause OR GPL-2.0 +/****************************************************************************** + * + * Module Name: apdump - Dump routines for ACPI tables (acpidump) + * + * Copyright (C) 2000 - 2020, Intel Corp. + * + *****************************************************************************/ + +#include "acpidump.h" + +/* Local prototypes */ + +static int +ap_dump_table_buffer(struct acpi_table_header *table, + u32 instance, acpi_physical_address address); + +/****************************************************************************** + * + * FUNCTION: ap_is_valid_header + * + * PARAMETERS: table - Pointer to table to be validated + * + * RETURN: TRUE if the header appears to be valid. FALSE otherwise + * + * DESCRIPTION: Check for a valid ACPI table header + * + ******************************************************************************/ + +u8 ap_is_valid_header(struct acpi_table_header *table) +{ + + if (!ACPI_VALIDATE_RSDP_SIG(table->signature)) { + + /* Make sure signature is all ASCII and a valid ACPI name */ + + if (!acpi_ut_valid_nameseg(table->signature)) { + fprintf(stderr, + "Table signature (0x%8.8X) is invalid\n", + *(u32 *)table->signature); + return (FALSE); + } + + /* Check for minimum table length */ + + if (table->length < sizeof(struct acpi_table_header)) { + fprintf(stderr, "Table length (0x%8.8X) is invalid\n", + table->length); + return (FALSE); + } + } + + return (TRUE); +} + +/****************************************************************************** + * + * FUNCTION: ap_is_valid_checksum + * + * PARAMETERS: table - Pointer to table to be validated + * + * RETURN: TRUE if the checksum appears to be valid. FALSE otherwise. + * + * DESCRIPTION: Check for a valid ACPI table checksum. + * + ******************************************************************************/ + +u8 ap_is_valid_checksum(struct acpi_table_header *table) +{ + acpi_status status; + struct acpi_table_rsdp *rsdp; + + if (ACPI_VALIDATE_RSDP_SIG(table->signature)) { + /* + * Checksum for RSDP. + * Note: Other checksums are computed during the table dump. + */ + rsdp = ACPI_CAST_PTR(struct acpi_table_rsdp, table); + status = acpi_tb_validate_rsdp(rsdp); + } else { + status = acpi_tb_verify_checksum(table, table->length); + } + + if (ACPI_FAILURE(status)) { + fprintf(stderr, "%4.4s: Warning: wrong checksum in table\n", + table->signature); + } + + return (AE_OK); +} + +/****************************************************************************** + * + * FUNCTION: ap_get_table_length + * + * PARAMETERS: table - Pointer to the table + * + * RETURN: Table length + * + * DESCRIPTION: Obtain table length according to table signature. + * + ******************************************************************************/ + +u32 ap_get_table_length(struct acpi_table_header *table) +{ + struct acpi_table_rsdp *rsdp; + + /* Check if table is valid */ + + if (!ap_is_valid_header(table)) { + return (0); + } + + if (ACPI_VALIDATE_RSDP_SIG(table->signature)) { + rsdp = ACPI_CAST_PTR(struct acpi_table_rsdp, table); + return (acpi_tb_get_rsdp_length(rsdp)); + } + + /* Normal ACPI table */ + + return (table->length); +} + +/****************************************************************************** + * + * FUNCTION: ap_dump_table_buffer + * + * PARAMETERS: table - ACPI table to be dumped + * instance - ACPI table instance no. to be dumped + * address - Physical address of the table + * + * RETURN: None + * + * DESCRIPTION: Dump an ACPI table in standard ASCII hex format, with a + * header that is compatible with the acpi_xtract utility. + * + ******************************************************************************/ + +static int +ap_dump_table_buffer(struct acpi_table_header *table, + u32 instance, acpi_physical_address address) +{ + u32 table_length; + + table_length = ap_get_table_length(table); + + /* Print only the header if requested */ + + if (gbl_summary_mode) { + acpi_tb_print_table_header(address, table); + return (0); + } + + /* Dump to binary file if requested */ + + if (gbl_binary_mode) { + return (ap_write_to_binary_file(table, instance)); + } + + /* + * Dump the table with header for use with acpixtract utility. + * Note: simplest to just always emit a 64-bit address. acpi_xtract + * utility can handle this. + */ + fprintf(gbl_output_file, "%4.4s @ 0x%8.8X%8.8X\n", + table->signature, ACPI_FORMAT_UINT64(address)); + + acpi_ut_dump_buffer_to_file(gbl_output_file, + ACPI_CAST_PTR(u8, table), table_length, + DB_BYTE_DISPLAY, 0); + fprintf(gbl_output_file, "\n"); + return (0); +} + +/****************************************************************************** + * + * FUNCTION: ap_dump_all_tables + * + * PARAMETERS: None + * + * RETURN: Status + * + * DESCRIPTION: Get all tables from the RSDT/XSDT (or at least all of the + * tables that we can possibly get). + * + ******************************************************************************/ + +int ap_dump_all_tables(void) +{ + struct acpi_table_header *table; + u32 instance = 0; + acpi_physical_address address; + acpi_status status; + int table_status; + u32 i; + + /* Get and dump all available ACPI tables */ + + for (i = 0; i < AP_MAX_ACPI_FILES; i++) { + status = + acpi_os_get_table_by_index(i, &table, &instance, &address); + if (ACPI_FAILURE(status)) { + + /* AE_LIMIT means that no more tables are available */ + + if (status == AE_LIMIT) { + return (0); + } else if (i == 0) { + fprintf(stderr, + "Could not get ACPI tables, %s\n", + acpi_format_exception(status)); + return (-1); + } else { + fprintf(stderr, + "Could not get ACPI table at index %u, %s\n", + i, acpi_format_exception(status)); + continue; + } + } + + table_status = ap_dump_table_buffer(table, instance, address); + ACPI_FREE(table); + + if (table_status) { + break; + } + } + + /* Something seriously bad happened if the loop terminates here */ + + return (-1); +} + +/****************************************************************************** + * + * FUNCTION: ap_dump_table_by_address + * + * PARAMETERS: ascii_address - Address for requested ACPI table + * + * RETURN: Status + * + * DESCRIPTION: Get an ACPI table via a physical address and dump it. + * + ******************************************************************************/ + +int ap_dump_table_by_address(char *ascii_address) +{ + acpi_physical_address address; + struct acpi_table_header *table; + acpi_status status; + int table_status; + u64 long_address; + + /* Convert argument to an integer physical address */ + + status = acpi_ut_strtoul64(ascii_address, &long_address); + if (ACPI_FAILURE(status)) { + fprintf(stderr, "%s: Could not convert to a physical address\n", + ascii_address); + return (-1); + } + + address = (acpi_physical_address)long_address; + status = acpi_os_get_table_by_address(address, &table); + if (ACPI_FAILURE(status)) { + fprintf(stderr, "Could not get table at 0x%8.8X%8.8X, %s\n", + ACPI_FORMAT_UINT64(address), + acpi_format_exception(status)); + return (-1); + } + + table_status = ap_dump_table_buffer(table, 0, address); + ACPI_FREE(table); + return (table_status); +} + +/****************************************************************************** + * + * FUNCTION: ap_dump_table_by_name + * + * PARAMETERS: signature - Requested ACPI table signature + * + * RETURN: Status + * + * DESCRIPTION: Get an ACPI table via a signature and dump it. Handles + * multiple tables with the same signature (SSDTs). + * + ******************************************************************************/ + +int ap_dump_table_by_name(char *signature) +{ + char local_signature[ACPI_NAMESEG_SIZE + 1]; + u32 instance; + struct acpi_table_header *table; + acpi_physical_address address; + acpi_status status; + int table_status; + + if (strlen(signature) != ACPI_NAMESEG_SIZE) { + fprintf(stderr, + "Invalid table signature [%s]: must be exactly 4 characters\n", + signature); + return (-1); + } + + /* Table signatures are expected to be uppercase */ + + strcpy(local_signature, signature); + acpi_ut_strupr(local_signature); + + /* To be friendly, handle tables whose signatures do not match the name */ + + if (ACPI_COMPARE_NAMESEG(local_signature, "FADT")) { + strcpy(local_signature, ACPI_SIG_FADT); + } else if (ACPI_COMPARE_NAMESEG(local_signature, "MADT")) { + strcpy(local_signature, ACPI_SIG_MADT); + } + + /* Dump all instances of this signature (to handle multiple SSDTs) */ + + for (instance = 0; instance < AP_MAX_ACPI_FILES; instance++) { + status = acpi_os_get_table_by_name(local_signature, instance, + &table, &address); + if (ACPI_FAILURE(status)) { + + /* AE_LIMIT means that no more tables are available */ + + if (status == AE_LIMIT) { + return (0); + } + + fprintf(stderr, + "Could not get ACPI table with signature [%s], %s\n", + local_signature, acpi_format_exception(status)); + return (-1); + } + + table_status = ap_dump_table_buffer(table, instance, address); + ACPI_FREE(table); + + if (table_status) { + break; + } + } + + /* Something seriously bad happened if the loop terminates here */ + + return (-1); +} + +/****************************************************************************** + * + * FUNCTION: ap_dump_table_from_file + * + * PARAMETERS: pathname - File containing the binary ACPI table + * + * RETURN: Status + * + * DESCRIPTION: Dump an ACPI table from a binary file + * + ******************************************************************************/ + +int ap_dump_table_from_file(char *pathname) +{ + struct acpi_table_header *table; + u32 file_size = 0; + int table_status = -1; + + /* Get the entire ACPI table from the file */ + + table = ap_get_table_from_file(pathname, &file_size); + if (!table) { + return (-1); + } + + if (!acpi_ut_valid_nameseg(table->signature)) { + fprintf(stderr, + "No valid ACPI signature was found in input file %s\n", + pathname); + } + + /* File must be at least as long as the table length */ + + if (table->length > file_size) { + fprintf(stderr, + "Table length (0x%X) is too large for input file (0x%X) %s\n", + table->length, file_size, pathname); + goto exit; + } + + if (gbl_verbose_mode) { + fprintf(stderr, + "Input file: %s contains table [%4.4s], 0x%X (%u) bytes\n", + pathname, table->signature, file_size, file_size); + } + + table_status = ap_dump_table_buffer(table, 0, 0); + +exit: + ACPI_FREE(table); + return (table_status); +} diff --git a/tools/power/acpi/tools/acpidump/apfiles.c b/tools/power/acpi/tools/acpidump/apfiles.c new file mode 100644 index 000000000..a682bae4e --- /dev/null +++ b/tools/power/acpi/tools/acpidump/apfiles.c @@ -0,0 +1,229 @@ +// SPDX-License-Identifier: BSD-3-Clause OR GPL-2.0 +/****************************************************************************** + * + * Module Name: apfiles - File-related functions for acpidump utility + * + * Copyright (C) 2000 - 2020, Intel Corp. + * + *****************************************************************************/ + +#include "acpidump.h" + +/* Local prototypes */ + +static int ap_is_existing_file(char *pathname); + +/****************************************************************************** + * + * FUNCTION: ap_is_existing_file + * + * PARAMETERS: pathname - Output filename + * + * RETURN: 0 on success + * + * DESCRIPTION: Query for file overwrite if it already exists. + * + ******************************************************************************/ + +static int ap_is_existing_file(char *pathname) +{ +#if !defined(_GNU_EFI) && !defined(_EDK2_EFI) + struct stat stat_info; + int in_char; + + if (!stat(pathname, &stat_info)) { + fprintf(stderr, + "Target path already exists, overwrite? [y|n] "); + + in_char = fgetc(stdin); + if (in_char == '\n') { + in_char = fgetc(stdin); + } + + if (in_char != 'y' && in_char != 'Y') { + return (-1); + } + } +#endif + + return (0); +} + +/****************************************************************************** + * + * FUNCTION: ap_open_output_file + * + * PARAMETERS: pathname - Output filename + * + * RETURN: Open file handle + * + * DESCRIPTION: Open a text output file for acpidump. Checks if file already + * exists. + * + ******************************************************************************/ + +int ap_open_output_file(char *pathname) +{ + ACPI_FILE file; + + /* If file exists, prompt for overwrite */ + + if (ap_is_existing_file(pathname) != 0) { + return (-1); + } + + /* Point stdout to the file */ + + file = fopen(pathname, "w"); + if (!file) { + fprintf(stderr, "Could not open output file: %s\n", pathname); + return (-1); + } + + /* Save the file and path */ + + gbl_output_file = file; + gbl_output_filename = pathname; + return (0); +} + +/****************************************************************************** + * + * FUNCTION: ap_write_to_binary_file + * + * PARAMETERS: table - ACPI table to be written + * instance - ACPI table instance no. to be written + * + * RETURN: Status + * + * DESCRIPTION: Write an ACPI table to a binary file. Builds the output + * filename from the table signature. + * + ******************************************************************************/ + +int ap_write_to_binary_file(struct acpi_table_header *table, u32 instance) +{ + char filename[ACPI_NAMESEG_SIZE + 16]; + char instance_str[16]; + ACPI_FILE file; + acpi_size actual; + u32 table_length; + + /* Obtain table length */ + + table_length = ap_get_table_length(table); + + /* Construct lower-case filename from the table local signature */ + + if (ACPI_VALIDATE_RSDP_SIG(table->signature)) { + ACPI_COPY_NAMESEG(filename, ACPI_RSDP_NAME); + } else { + ACPI_COPY_NAMESEG(filename, table->signature); + } + + filename[0] = (char)tolower((int)filename[0]); + filename[1] = (char)tolower((int)filename[1]); + filename[2] = (char)tolower((int)filename[2]); + filename[3] = (char)tolower((int)filename[3]); + filename[ACPI_NAMESEG_SIZE] = 0; + + /* Handle multiple SSDts - create different filenames for each */ + + if (instance > 0) { + snprintf(instance_str, sizeof(instance_str), "%u", instance); + strcat(filename, instance_str); + } + + strcat(filename, FILE_SUFFIX_BINARY_TABLE); + + if (gbl_verbose_mode) { + fprintf(stderr, + "Writing [%4.4s] to binary file: %s 0x%X (%u) bytes\n", + table->signature, filename, table->length, + table->length); + } + + /* Open the file and dump the entire table in binary mode */ + + file = fopen(filename, "wb"); + if (!file) { + fprintf(stderr, "Could not open output file: %s\n", filename); + return (-1); + } + + actual = fwrite(table, 1, table_length, file); + if (actual != table_length) { + fprintf(stderr, "Error writing binary output file: %s\n", + filename); + fclose(file); + return (-1); + } + + fclose(file); + return (0); +} + +/****************************************************************************** + * + * FUNCTION: ap_get_table_from_file + * + * PARAMETERS: pathname - File containing the binary ACPI table + * out_file_size - Where the file size is returned + * + * RETURN: Buffer containing the ACPI table. NULL on error. + * + * DESCRIPTION: Open a file and read it entirely into a new buffer + * + ******************************************************************************/ + +struct acpi_table_header *ap_get_table_from_file(char *pathname, + u32 *out_file_size) +{ + struct acpi_table_header *buffer = NULL; + ACPI_FILE file; + u32 file_size; + acpi_size actual; + + /* Must use binary mode */ + + file = fopen(pathname, "rb"); + if (!file) { + fprintf(stderr, "Could not open input file: %s\n", pathname); + return (NULL); + } + + /* Need file size to allocate a buffer */ + + file_size = cm_get_file_size(file); + if (file_size == ACPI_UINT32_MAX) { + fprintf(stderr, + "Could not get input file size: %s\n", pathname); + goto cleanup; + } + + /* Allocate a buffer for the entire file */ + + buffer = ACPI_ALLOCATE_ZEROED(file_size); + if (!buffer) { + fprintf(stderr, + "Could not allocate file buffer of size: %u\n", + file_size); + goto cleanup; + } + + /* Read the entire file */ + + actual = fread(buffer, 1, file_size, file); + if (actual != file_size) { + fprintf(stderr, "Could not read input file: %s\n", pathname); + ACPI_FREE(buffer); + buffer = NULL; + goto cleanup; + } + + *out_file_size = file_size; + +cleanup: + fclose(file); + return (buffer); +} diff --git a/tools/power/acpi/tools/acpidump/apmain.c b/tools/power/acpi/tools/acpidump/apmain.c new file mode 100644 index 000000000..046e6b8d6 --- /dev/null +++ b/tools/power/acpi/tools/acpidump/apmain.c @@ -0,0 +1,366 @@ +// SPDX-License-Identifier: BSD-3-Clause OR GPL-2.0 +/****************************************************************************** + * + * Module Name: apmain - Main module for the acpidump utility + * + * Copyright (C) 2000 - 2020, Intel Corp. + * + *****************************************************************************/ + +#define _DECLARE_GLOBALS +#include "acpidump.h" + +/* + * acpidump - A portable utility for obtaining system ACPI tables and dumping + * them in an ASCII hex format suitable for binary extraction via acpixtract. + * + * Obtaining the system ACPI tables is an OS-specific operation. + * + * This utility can be ported to any host operating system by providing a + * module containing system-specific versions of these interfaces: + * + * acpi_os_get_table_by_address + * acpi_os_get_table_by_index + * acpi_os_get_table_by_name + * + * See the ACPICA Reference Guide for the exact definitions of these + * interfaces. Also, see these ACPICA source code modules for example + * implementations: + * + * source/os_specific/service_layers/oswintbl.c + * source/os_specific/service_layers/oslinuxtbl.c + */ + +/* Local prototypes */ + +static void ap_display_usage(void); + +static int ap_do_options(int argc, char **argv); + +static int ap_insert_action(char *argument, u32 to_be_done); + +/* Table for deferred actions from command line options */ + +struct ap_dump_action action_table[AP_MAX_ACTIONS]; +u32 current_action = 0; + +#define AP_UTILITY_NAME "ACPI Binary Table Dump Utility" +#define AP_SUPPORTED_OPTIONS "?a:bc:f:hn:o:r:sv^xz" + +/****************************************************************************** + * + * FUNCTION: ap_display_usage + * + * DESCRIPTION: Usage message for the acpi_dump utility + * + ******************************************************************************/ + +static void ap_display_usage(void) +{ + + ACPI_USAGE_HEADER("acpidump [options]"); + + ACPI_OPTION("-b", "Dump tables to binary files"); + ACPI_OPTION("-h -?", "This help message"); + ACPI_OPTION("-o <File>", "Redirect output to file"); + ACPI_OPTION("-r <Address>", "Dump tables from specified RSDP"); + ACPI_OPTION("-s", "Print table summaries only"); + ACPI_OPTION("-v", "Display version information"); + ACPI_OPTION("-vd", "Display build date and time"); + ACPI_OPTION("-z", "Verbose mode"); + + ACPI_USAGE_TEXT("\nTable Options:\n"); + + ACPI_OPTION("-a <Address>", "Get table via a physical address"); + ACPI_OPTION("-c <on|off>", "Turning on/off customized table dumping"); + ACPI_OPTION("-f <BinaryFile>", "Get table via a binary file"); + ACPI_OPTION("-n <Signature>", "Get table via a name/signature"); + ACPI_OPTION("-x", "Do not use but dump XSDT"); + ACPI_OPTION("-x -x", "Do not use or dump XSDT"); + + ACPI_USAGE_TEXT("\n" + "Invocation without parameters dumps all available tables\n" + "Multiple mixed instances of -a, -f, and -n are supported\n\n"); +} + +/****************************************************************************** + * + * FUNCTION: ap_insert_action + * + * PARAMETERS: argument - Pointer to the argument for this action + * to_be_done - What to do to process this action + * + * RETURN: Status + * + * DESCRIPTION: Add an action item to the action table + * + ******************************************************************************/ + +static int ap_insert_action(char *argument, u32 to_be_done) +{ + + /* Insert action and check for table overflow */ + + action_table[current_action].argument = argument; + action_table[current_action].to_be_done = to_be_done; + + current_action++; + if (current_action > AP_MAX_ACTIONS) { + fprintf(stderr, "Too many table options (max %d)\n", + AP_MAX_ACTIONS); + return (-1); + } + + return (0); +} + +/****************************************************************************** + * + * FUNCTION: ap_do_options + * + * PARAMETERS: argc/argv - Standard argc/argv + * + * RETURN: Status + * + * DESCRIPTION: Command line option processing. The main actions for getting + * and dumping tables are deferred via the action table. + * + *****************************************************************************/ + +static int ap_do_options(int argc, char **argv) +{ + int j; + acpi_status status; + + /* Command line options */ + + while ((j = + acpi_getopt(argc, argv, AP_SUPPORTED_OPTIONS)) != ACPI_OPT_END) + switch (j) { + /* + * Global options + */ + case 'b': /* Dump all input tables to binary files */ + + gbl_binary_mode = TRUE; + continue; + + case 'c': /* Dump customized tables */ + + if (!strcmp(acpi_gbl_optarg, "on")) { + gbl_dump_customized_tables = TRUE; + } else if (!strcmp(acpi_gbl_optarg, "off")) { + gbl_dump_customized_tables = FALSE; + } else { + fprintf(stderr, + "%s: Cannot handle this switch, please use on|off\n", + acpi_gbl_optarg); + return (-1); + } + continue; + + case 'h': + case '?': + + ap_display_usage(); + return (1); + + case 'o': /* Redirect output to a single file */ + + if (ap_open_output_file(acpi_gbl_optarg)) { + return (-1); + } + continue; + + case 'r': /* Dump tables from specified RSDP */ + + status = + acpi_ut_strtoul64(acpi_gbl_optarg, &gbl_rsdp_base); + if (ACPI_FAILURE(status)) { + fprintf(stderr, + "%s: Could not convert to a physical address\n", + acpi_gbl_optarg); + return (-1); + } + continue; + + case 's': /* Print table summaries only */ + + gbl_summary_mode = TRUE; + continue; + + case 'x': /* Do not use XSDT */ + + if (!acpi_gbl_do_not_use_xsdt) { + acpi_gbl_do_not_use_xsdt = TRUE; + } else { + gbl_do_not_dump_xsdt = TRUE; + } + continue; + + case 'v': /* -v: (Version): signon already emitted, just exit */ + + switch (acpi_gbl_optarg[0]) { + case '^': /* -v: (Version) */ + + fprintf(stderr, + ACPI_COMMON_SIGNON(AP_UTILITY_NAME)); + return (1); + + case 'd': + + fprintf(stderr, + ACPI_COMMON_SIGNON(AP_UTILITY_NAME)); + printf(ACPI_COMMON_BUILD_TIME); + return (1); + + default: + + printf("Unknown option: -v%s\n", + acpi_gbl_optarg); + return (-1); + } + break; + + case 'z': /* Verbose mode */ + + gbl_verbose_mode = TRUE; + fprintf(stderr, ACPI_COMMON_SIGNON(AP_UTILITY_NAME)); + continue; + + /* + * Table options + */ + case 'a': /* Get table by physical address */ + + if (ap_insert_action + (acpi_gbl_optarg, AP_DUMP_TABLE_BY_ADDRESS)) { + return (-1); + } + break; + + case 'f': /* Get table from a file */ + + if (ap_insert_action + (acpi_gbl_optarg, AP_DUMP_TABLE_BY_FILE)) { + return (-1); + } + break; + + case 'n': /* Get table by input name (signature) */ + + if (ap_insert_action + (acpi_gbl_optarg, AP_DUMP_TABLE_BY_NAME)) { + return (-1); + } + break; + + default: + + ap_display_usage(); + return (-1); + } + + /* If there are no actions, this means "get/dump all tables" */ + + if (current_action == 0) { + if (ap_insert_action(NULL, AP_DUMP_ALL_TABLES)) { + return (-1); + } + } + + return (0); +} + +/****************************************************************************** + * + * FUNCTION: main + * + * PARAMETERS: argc/argv - Standard argc/argv + * + * RETURN: Status + * + * DESCRIPTION: C main function for acpidump utility + * + ******************************************************************************/ + +#if !defined(_GNU_EFI) && !defined(_EDK2_EFI) +int ACPI_SYSTEM_XFACE main(int argc, char *argv[]) +#else +int ACPI_SYSTEM_XFACE acpi_main(int argc, char *argv[]) +#endif +{ + int status = 0; + struct ap_dump_action *action; + u32 file_size; + u32 i; + + ACPI_DEBUG_INITIALIZE(); /* For debug version only */ + acpi_os_initialize(); + gbl_output_file = ACPI_FILE_OUT; + acpi_gbl_integer_byte_width = 8; + + /* Process command line options */ + + status = ap_do_options(argc, argv); + if (status > 0) { + return (0); + } + if (status < 0) { + return (status); + } + + /* Get/dump ACPI table(s) as requested */ + + for (i = 0; i < current_action; i++) { + action = &action_table[i]; + switch (action->to_be_done) { + case AP_DUMP_ALL_TABLES: + + status = ap_dump_all_tables(); + break; + + case AP_DUMP_TABLE_BY_ADDRESS: + + status = ap_dump_table_by_address(action->argument); + break; + + case AP_DUMP_TABLE_BY_NAME: + + status = ap_dump_table_by_name(action->argument); + break; + + case AP_DUMP_TABLE_BY_FILE: + + status = ap_dump_table_from_file(action->argument); + break; + + default: + + fprintf(stderr, + "Internal error, invalid action: 0x%X\n", + action->to_be_done); + return (-1); + } + + if (status) { + return (status); + } + } + + if (gbl_output_filename) { + if (gbl_verbose_mode) { + + /* Summary for the output file */ + + file_size = cm_get_file_size(gbl_output_file); + fprintf(stderr, + "Output file %s contains 0x%X (%u) bytes\n\n", + gbl_output_filename, file_size, file_size); + } + + fclose(gbl_output_file); + } + + return (status); +} diff --git a/tools/power/acpi/tools/ec/Makefile b/tools/power/acpi/tools/ec/Makefile new file mode 100644 index 000000000..d0abac0ec --- /dev/null +++ b/tools/power/acpi/tools/ec/Makefile @@ -0,0 +1,14 @@ +# SPDX-License-Identifier: GPL-2.0-only +# tools/power/acpi/tools/acpidump/Makefile - ACPI tool Makefile +# +# Copyright (c) 2015, Intel Corporation +# Author: Lv Zheng <lv.zheng@intel.com> +# + +include ../../Makefile.config + +TOOL = ec +TOOL_OBJS = \ + ec_access.o + +include ../../Makefile.rules diff --git a/tools/power/acpi/tools/ec/ec_access.c b/tools/power/acpi/tools/ec/ec_access.c new file mode 100644 index 000000000..8bb271b21 --- /dev/null +++ b/tools/power/acpi/tools/ec/ec_access.c @@ -0,0 +1,237 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * ec_access.c + * + * Copyright (C) 2010 SUSE Linux Products GmbH + * Author: + * Thomas Renninger <trenn@suse.de> + */ + +#include <fcntl.h> +#include <err.h> +#include <stdio.h> +#include <stdlib.h> +#include <libgen.h> +#include <unistd.h> +#include <getopt.h> +#include <stdint.h> +#include <sys/types.h> +#include <sys/stat.h> + + +#define EC_SPACE_SIZE 256 +#define SYSFS_PATH "/sys/kernel/debug/ec/ec0/io" + +/* TBD/Enhancements: + - Provide param for accessing different ECs (not supported by kernel yet) +*/ + +static int read_mode = -1; +static int sleep_time; +static int write_byte_offset = -1; +static int read_byte_offset = -1; +static uint8_t write_value = -1; + +void usage(char progname[], int exit_status) +{ + printf("Usage:\n"); + printf("1) %s -r [-s sleep]\n", basename(progname)); + printf("2) %s -b byte_offset\n", basename(progname)); + printf("3) %s -w byte_offset -v value\n\n", basename(progname)); + + puts("\t-r [-s sleep] : Dump EC registers"); + puts("\t If sleep is given, sleep x seconds,"); + puts("\t re-read EC registers and show changes"); + puts("\t-b offset : Read value at byte_offset (in hex)"); + puts("\t-w offset -v value : Write value at byte_offset"); + puts("\t-h : Print this help\n\n"); + puts("Offsets and values are in hexadecimal number system."); + puts("The offset and value must be between 0 and 0xff."); + exit(exit_status); +} + +void parse_opts(int argc, char *argv[]) +{ + int c; + + while ((c = getopt(argc, argv, "rs:b:w:v:h")) != -1) { + + switch (c) { + case 'r': + if (read_mode != -1) + usage(argv[0], EXIT_FAILURE); + read_mode = 1; + break; + case 's': + if (read_mode != -1 && read_mode != 1) + usage(argv[0], EXIT_FAILURE); + + sleep_time = atoi(optarg); + if (sleep_time <= 0) { + sleep_time = 0; + usage(argv[0], EXIT_FAILURE); + printf("Bad sleep time: %s\n", optarg); + } + break; + case 'b': + if (read_mode != -1) + usage(argv[0], EXIT_FAILURE); + read_mode = 1; + read_byte_offset = strtoul(optarg, NULL, 16); + break; + case 'w': + if (read_mode != -1) + usage(argv[0], EXIT_FAILURE); + read_mode = 0; + write_byte_offset = strtoul(optarg, NULL, 16); + break; + case 'v': + write_value = strtoul(optarg, NULL, 16); + break; + case 'h': + usage(argv[0], EXIT_SUCCESS); + default: + fprintf(stderr, "Unknown option!\n"); + usage(argv[0], EXIT_FAILURE); + } + } + if (read_mode == 0) { + if (write_byte_offset < 0 || + write_byte_offset >= EC_SPACE_SIZE) { + fprintf(stderr, "Wrong byte offset 0x%.2x, valid: " + "[0-0x%.2x]\n", + write_byte_offset, EC_SPACE_SIZE - 1); + usage(argv[0], EXIT_FAILURE); + } + if (write_value < 0 || + write_value >= 255) { + fprintf(stderr, "Wrong byte offset 0x%.2x, valid:" + "[0-0xff]\n", write_byte_offset); + usage(argv[0], EXIT_FAILURE); + } + } + if (read_mode == 1 && read_byte_offset != -1) { + if (read_byte_offset < -1 || + read_byte_offset >= EC_SPACE_SIZE) { + fprintf(stderr, "Wrong byte offset 0x%.2x, valid: " + "[0-0x%.2x]\n", + read_byte_offset, EC_SPACE_SIZE - 1); + usage(argv[0], EXIT_FAILURE); + } + } + /* Add additional parameter checks here */ +} + +void dump_ec(int fd) +{ + char buf[EC_SPACE_SIZE]; + char buf2[EC_SPACE_SIZE]; + int byte_off, bytes_read; + + bytes_read = read(fd, buf, EC_SPACE_SIZE); + + if (bytes_read == -1) + err(EXIT_FAILURE, "Could not read from %s\n", SYSFS_PATH); + + if (bytes_read != EC_SPACE_SIZE) + fprintf(stderr, "Could only read %d bytes\n", bytes_read); + + printf(" 00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F"); + for (byte_off = 0; byte_off < bytes_read; byte_off++) { + if ((byte_off % 16) == 0) + printf("\n%.2X: ", byte_off); + printf(" %.2x ", (uint8_t)buf[byte_off]); + } + printf("\n"); + + if (!sleep_time) + return; + + printf("\n"); + lseek(fd, 0, SEEK_SET); + sleep(sleep_time); + + bytes_read = read(fd, buf2, EC_SPACE_SIZE); + + if (bytes_read == -1) + err(EXIT_FAILURE, "Could not read from %s\n", SYSFS_PATH); + + if (bytes_read != EC_SPACE_SIZE) + fprintf(stderr, "Could only read %d bytes\n", bytes_read); + + printf(" 00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F"); + for (byte_off = 0; byte_off < bytes_read; byte_off++) { + if ((byte_off % 16) == 0) + printf("\n%.2X: ", byte_off); + + if (buf[byte_off] == buf2[byte_off]) + printf(" %.2x ", (uint8_t)buf2[byte_off]); + else + printf("*%.2x ", (uint8_t)buf2[byte_off]); + } + printf("\n"); +} + +void read_ec_val(int fd, int byte_offset) +{ + uint8_t buf; + int error; + + error = lseek(fd, byte_offset, SEEK_SET); + if (error != byte_offset) + err(EXIT_FAILURE, "Cannot set offset to 0x%.2x", byte_offset); + + error = read(fd, &buf, 1); + if (error != 1) + err(EXIT_FAILURE, "Could not read byte 0x%.2x from %s\n", + byte_offset, SYSFS_PATH); + printf("0x%.2x\n", buf); + return; +} + +void write_ec_val(int fd, int byte_offset, uint8_t value) +{ + int error; + + error = lseek(fd, byte_offset, SEEK_SET); + if (error != byte_offset) + err(EXIT_FAILURE, "Cannot set offset to 0x%.2x", byte_offset); + + error = write(fd, &value, 1); + if (error != 1) + err(EXIT_FAILURE, "Cannot write value 0x%.2x to offset 0x%.2x", + value, byte_offset); +} + +int main(int argc, char *argv[]) +{ + int file_mode = O_RDONLY; + int fd; + + parse_opts(argc, argv); + + if (read_mode == 0) + file_mode = O_WRONLY; + else if (read_mode == 1) + file_mode = O_RDONLY; + else + usage(argv[0], EXIT_FAILURE); + + fd = open(SYSFS_PATH, file_mode); + if (fd == -1) + err(EXIT_FAILURE, "%s", SYSFS_PATH); + + if (read_mode) + if (read_byte_offset == -1) + dump_ec(fd); + else if (read_byte_offset < 0 || + read_byte_offset >= EC_SPACE_SIZE) + usage(argv[0], EXIT_FAILURE); + else + read_ec_val(fd, read_byte_offset); + else + write_ec_val(fd, write_byte_offset, write_value); + close(fd); + + exit(EXIT_SUCCESS); +} diff --git a/tools/power/cpupower/.gitignore b/tools/power/cpupower/.gitignore new file mode 100644 index 000000000..7677329c4 --- /dev/null +++ b/tools/power/cpupower/.gitignore @@ -0,0 +1,29 @@ +# SPDX-License-Identifier: GPL-2.0-only +.libs +libcpupower.so +libcpupower.so.* +build/ccdv +cpufreq-info +cpufreq-set +cpufreq-aperf +lib/.libs +lib/cpufreq.lo +lib/cpufreq.o +lib/proc.lo +lib/proc.o +lib/sysfs.lo +lib/sysfs.o +po/cpupowerutils.pot +po/*.gmo +utils/cpufreq-info.o +utils/cpufreq-set.o +utils/cpufreq-aperf.o +cpupower +bench/cpufreq-bench +debug/kernel/Module.symvers +debug/i386/centrino-decode +debug/i386/dump_psb +debug/i386/intel_gsic +debug/i386/powernow-k8-decode +debug/x86_64/centrino-decode +debug/x86_64/powernow-k8-decode diff --git a/tools/power/cpupower/Makefile b/tools/power/cpupower/Makefile new file mode 100644 index 000000000..3b1594447 --- /dev/null +++ b/tools/power/cpupower/Makefile @@ -0,0 +1,328 @@ +# SPDX-License-Identifier: GPL-2.0-only +# Makefile for cpupower +# +# Copyright (C) 2005,2006 Dominik Brodowski <linux@dominikbrodowski.net> +# +# Based largely on the Makefile for udev by: +# +# Copyright (C) 2003,2004 Greg Kroah-Hartman <greg@kroah.com> +# +OUTPUT=./ +ifeq ("$(origin O)", "command line") + OUTPUT := $(O)/ +endif + +ifneq ($(OUTPUT),) +# check that the output directory actually exists +OUTDIR := $(shell cd $(OUTPUT) && pwd) +$(if $(OUTDIR),, $(error output directory "$(OUTPUT)" does not exist)) +endif + + +# --- CONFIGURATION BEGIN --- + +# Set the following to `true' to make a unstripped, unoptimized +# binary. Leave this set to `false' for production use. +DEBUG ?= true + +# make the build silent. Set this to something else to make it noisy again. +V ?= false + +# Internationalization support (output in different languages). +# Requires gettext. +NLS ?= true + +# Set the following to 'true' to build/install the +# cpufreq-bench benchmarking tool +CPUFREQ_BENCH ?= true + +# Do not build libraries, but build the code in statically +# Libraries are still built, otherwise the Makefile code would +# be rather ugly. +export STATIC ?= false + +# Prefix to the directories we're installing to +DESTDIR ?= + +# --- CONFIGURATION END --- + + + +# Package-related definitions. Distributions can modify the version +# and _should_ modify the PACKAGE_BUGREPORT definition + +VERSION:= $(shell ./utils/version-gen.sh) +LIB_MAJ= 0.0.1 +LIB_MIN= 0 + +PACKAGE = cpupower +PACKAGE_BUGREPORT = linux-pm@vger.kernel.org +LANGUAGES = de fr it cs pt + + +# Directory definitions. These are default and most probably +# do not need to be changed. Please note that DESTDIR is +# added in front of any of them + +bindir ?= /usr/bin +sbindir ?= /usr/sbin +mandir ?= /usr/man +includedir ?= /usr/include +localedir ?= /usr/share/locale +docdir ?= /usr/share/doc/packages/cpupower +confdir ?= /etc/ +bash_completion_dir ?= /usr/share/bash-completion/completions + +# Toolchain: what tools do we use, and what options do they need: + +CP = cp -fpR +INSTALL = /usr/bin/install -c +INSTALL_PROGRAM = ${INSTALL} +INSTALL_DATA = ${INSTALL} -m 644 +#bash completion scripts get sourced and so they should be rw only. +INSTALL_SCRIPT = ${INSTALL} -m 644 + +# If you are running a cross compiler, you may want to set this +# to something more interesting, like "arm-linux-". If you want +# to compile vs uClibc, that can be done here as well. +CROSS = #/usr/i386-linux-uclibc/usr/bin/i386-uclibc- +CC = $(CROSS)gcc +LD = $(CROSS)gcc +AR = $(CROSS)ar +STRIP = $(CROSS)strip +RANLIB = $(CROSS)ranlib +HOSTCC = gcc +MKDIR = mkdir + +# 64bit library detection +include ../../scripts/Makefile.arch + +ifeq ($(IS_64_BIT), 1) +libdir ?= /usr/lib64 +else +libdir ?= /usr/lib +endif + +# Now we set up the build system +# + +GMO_FILES = ${shell for HLANG in ${LANGUAGES}; do echo $(OUTPUT)po/$$HLANG.gmo; done;} + +export CROSS CC AR STRIP RANLIB CFLAGS LDFLAGS LIB_OBJS + +# check if compiler option is supported +cc-supports = ${shell if $(CC) ${1} -S -o /dev/null -x c /dev/null > /dev/null 2>&1; then echo "$(1)"; fi;} + +# use '-Os' optimization if available, else use -O2 +OPTIMIZATION := $(call cc-supports,-Os,-O2) + +WARNINGS := -Wall -Wchar-subscripts -Wpointer-arith -Wsign-compare +WARNINGS += $(call cc-supports,-Wno-pointer-sign) +WARNINGS += $(call cc-supports,-Wdeclaration-after-statement) +WARNINGS += -Wshadow + +override CFLAGS += -DVERSION=\"$(VERSION)\" -DPACKAGE=\"$(PACKAGE)\" \ + -DPACKAGE_BUGREPORT=\"$(PACKAGE_BUGREPORT)\" -D_GNU_SOURCE + +UTIL_OBJS = utils/helpers/amd.o utils/helpers/msr.o \ + utils/helpers/sysfs.o utils/helpers/misc.o utils/helpers/cpuid.o \ + utils/helpers/pci.o utils/helpers/bitmask.o \ + utils/idle_monitor/nhm_idle.o utils/idle_monitor/snb_idle.o \ + utils/idle_monitor/hsw_ext_idle.o \ + utils/idle_monitor/amd_fam14h_idle.o utils/idle_monitor/cpuidle_sysfs.o \ + utils/idle_monitor/mperf_monitor.o utils/idle_monitor/cpupower-monitor.o \ + utils/cpupower.o utils/cpufreq-info.o utils/cpufreq-set.o \ + utils/cpupower-set.o utils/cpupower-info.o utils/cpuidle-info.o \ + utils/cpuidle-set.o + +UTIL_SRC := $(UTIL_OBJS:.o=.c) + +UTIL_OBJS := $(addprefix $(OUTPUT),$(UTIL_OBJS)) + +UTIL_HEADERS = utils/helpers/helpers.h utils/idle_monitor/cpupower-monitor.h \ + utils/helpers/bitmask.h \ + utils/idle_monitor/idle_monitors.h utils/idle_monitor/idle_monitors.def + +LIB_HEADERS = lib/cpufreq.h lib/cpupower.h lib/cpuidle.h +LIB_SRC = lib/cpufreq.c lib/cpupower.c lib/cpuidle.c +LIB_OBJS = lib/cpufreq.o lib/cpupower.o lib/cpuidle.o +LIB_OBJS := $(addprefix $(OUTPUT),$(LIB_OBJS)) + +override CFLAGS += -pipe + +ifeq ($(strip $(NLS)),true) + INSTALL_NLS += install-gmo + COMPILE_NLS += create-gmo + override CFLAGS += -DNLS +endif + +ifeq ($(strip $(CPUFREQ_BENCH)),true) + INSTALL_BENCH += install-bench + COMPILE_BENCH += compile-bench +endif + +ifeq ($(strip $(STATIC)),true) + UTIL_OBJS += $(LIB_OBJS) + UTIL_HEADERS += $(LIB_HEADERS) + UTIL_SRC += $(LIB_SRC) +endif + +override CFLAGS += $(WARNINGS) + +ifeq ($(strip $(V)),false) + QUIET=@ + ECHO=@echo +else + QUIET= + ECHO=@\# +endif +export QUIET ECHO + +# if DEBUG is enabled, then we do not strip or optimize +ifeq ($(strip $(DEBUG)),true) + override CFLAGS += -O1 -g -DDEBUG + STRIPCMD = /bin/true -Since_we_are_debugging +else + override CFLAGS += $(OPTIMIZATION) -fomit-frame-pointer + STRIPCMD = $(STRIP) -s --remove-section=.note --remove-section=.comment +endif + + +# the actual make rules + +all: libcpupower $(OUTPUT)cpupower $(COMPILE_NLS) $(COMPILE_BENCH) + +$(OUTPUT)lib/%.o: $(LIB_SRC) $(LIB_HEADERS) + $(ECHO) " CC " $@ + $(QUIET) $(CC) $(CFLAGS) -fPIC -o $@ -c lib/$*.c + +$(OUTPUT)libcpupower.so.$(LIB_MAJ): $(LIB_OBJS) + $(ECHO) " LD " $@ + $(QUIET) $(CC) -shared $(CFLAGS) $(LDFLAGS) -o $@ \ + -Wl,-soname,libcpupower.so.$(LIB_MIN) $(LIB_OBJS) + @ln -sf $(@F) $(OUTPUT)libcpupower.so + @ln -sf $(@F) $(OUTPUT)libcpupower.so.$(LIB_MIN) + +libcpupower: $(OUTPUT)libcpupower.so.$(LIB_MAJ) + +# Let all .o files depend on its .c file and all headers +# Might be worth to put this into utils/Makefile at some point of time +$(UTIL_OBJS): $(UTIL_HEADERS) + +$(OUTPUT)%.o: %.c + $(ECHO) " CC " $@ + $(QUIET) $(CC) $(CFLAGS) -I./lib -I ./utils -o $@ -c $*.c + +$(OUTPUT)cpupower: $(UTIL_OBJS) $(OUTPUT)libcpupower.so.$(LIB_MAJ) + $(ECHO) " CC " $@ +ifeq ($(strip $(STATIC)),true) + $(QUIET) $(CC) $(CFLAGS) $(LDFLAGS) $(UTIL_OBJS) -lrt -lpci -L$(OUTPUT) -o $@ +else + $(QUIET) $(CC) $(CFLAGS) $(LDFLAGS) $(UTIL_OBJS) -lcpupower -lrt -lpci -L$(OUTPUT) -o $@ +endif + $(QUIET) $(STRIPCMD) $@ + +$(OUTPUT)po/$(PACKAGE).pot: $(UTIL_SRC) + $(ECHO) " GETTEXT " $@ + $(QUIET) xgettext --default-domain=$(PACKAGE) --add-comments \ + --keyword=_ --keyword=N_ $(UTIL_SRC) -p $(@D) -o $(@F) + +$(OUTPUT)po/%.gmo: po/%.po + $(ECHO) " MSGFMT " $@ + $(QUIET) msgfmt -o $@ po/$*.po + +create-gmo: ${GMO_FILES} + +update-po: $(OUTPUT)po/$(PACKAGE).pot + $(ECHO) " MSGMRG " $@ + $(QUIET) @for HLANG in $(LANGUAGES); do \ + echo -n "Updating $$HLANG "; \ + if msgmerge po/$$HLANG.po $< -o \ + $(OUTPUT)po/$$HLANG.new.po; then \ + mv -f $(OUTPUT)po/$$HLANG.new.po $(OUTPUT)po/$$HLANG.po; \ + else \ + echo "msgmerge for $$HLANG failed!"; \ + rm -f $(OUTPUT)po/$$HLANG.new.po; \ + fi; \ + done; + +compile-bench: $(OUTPUT)libcpupower.so.$(LIB_MAJ) + @V=$(V) confdir=$(confdir) $(MAKE) -C bench O=$(OUTPUT) + +# we compile into subdirectories. if the target directory is not the +# source directory, they might not exists. So we depend the various +# files onto their directories. +DIRECTORY_DEPS = $(LIB_OBJS) $(UTIL_OBJS) $(GMO_FILES) +$(DIRECTORY_DEPS): | $(sort $(dir $(DIRECTORY_DEPS))) + +# In the second step, we make a rule to actually create these directories +$(sort $(dir $(DIRECTORY_DEPS))): + $(ECHO) " MKDIR " $@ + $(QUIET) $(MKDIR) -p $@ 2>/dev/null + +clean: + -find $(OUTPUT) \( -not -type d \) -and \( -name '*~' -o -name '*.[oas]' \) -type f -print \ + | xargs rm -f + -rm -f $(OUTPUT)cpupower + -rm -f $(OUTPUT)libcpupower.so* + -rm -rf $(OUTPUT)po/*.gmo + -rm -rf $(OUTPUT)po/*.pot + $(MAKE) -C bench O=$(OUTPUT) clean + + +install-lib: libcpupower + $(INSTALL) -d $(DESTDIR)${libdir} + $(CP) $(OUTPUT)libcpupower.so* $(DESTDIR)${libdir}/ + $(INSTALL) -d $(DESTDIR)${includedir} + $(INSTALL_DATA) lib/cpufreq.h $(DESTDIR)${includedir}/cpufreq.h + $(INSTALL_DATA) lib/cpuidle.h $(DESTDIR)${includedir}/cpuidle.h + +install-tools: $(OUTPUT)cpupower + $(INSTALL) -d $(DESTDIR)${bindir} + $(INSTALL_PROGRAM) $(OUTPUT)cpupower $(DESTDIR)${bindir} + $(INSTALL) -d $(DESTDIR)${bash_completion_dir} + $(INSTALL_SCRIPT) cpupower-completion.sh '$(DESTDIR)${bash_completion_dir}/cpupower' + +install-man: + $(INSTALL_DATA) -D man/cpupower.1 $(DESTDIR)${mandir}/man1/cpupower.1 + $(INSTALL_DATA) -D man/cpupower-frequency-set.1 $(DESTDIR)${mandir}/man1/cpupower-frequency-set.1 + $(INSTALL_DATA) -D man/cpupower-frequency-info.1 $(DESTDIR)${mandir}/man1/cpupower-frequency-info.1 + $(INSTALL_DATA) -D man/cpupower-idle-set.1 $(DESTDIR)${mandir}/man1/cpupower-idle-set.1 + $(INSTALL_DATA) -D man/cpupower-idle-info.1 $(DESTDIR)${mandir}/man1/cpupower-idle-info.1 + $(INSTALL_DATA) -D man/cpupower-set.1 $(DESTDIR)${mandir}/man1/cpupower-set.1 + $(INSTALL_DATA) -D man/cpupower-info.1 $(DESTDIR)${mandir}/man1/cpupower-info.1 + $(INSTALL_DATA) -D man/cpupower-monitor.1 $(DESTDIR)${mandir}/man1/cpupower-monitor.1 + +install-gmo: create-gmo + $(INSTALL) -d $(DESTDIR)${localedir} + for HLANG in $(LANGUAGES); do \ + echo '$(INSTALL_DATA) -D $(OUTPUT)po/$$HLANG.gmo $(DESTDIR)${localedir}/$$HLANG/LC_MESSAGES/cpupower.mo'; \ + $(INSTALL_DATA) -D $(OUTPUT)po/$$HLANG.gmo $(DESTDIR)${localedir}/$$HLANG/LC_MESSAGES/cpupower.mo; \ + done; + +install-bench: compile-bench + @#DESTDIR must be set from outside to survive + @sbindir=$(sbindir) bindir=$(bindir) docdir=$(docdir) confdir=$(confdir) $(MAKE) -C bench O=$(OUTPUT) install + +ifeq ($(strip $(STATIC)),true) +install: all install-tools install-man $(INSTALL_NLS) $(INSTALL_BENCH) +else +install: all install-lib install-tools install-man $(INSTALL_NLS) $(INSTALL_BENCH) +endif + +uninstall: + - rm -f $(DESTDIR)${libdir}/libcpupower.* + - rm -f $(DESTDIR)${includedir}/cpufreq.h + - rm -f $(DESTDIR)${includedir}/cpuidle.h + - rm -f $(DESTDIR)${bindir}/utils/cpupower + - rm -f $(DESTDIR)${mandir}/man1/cpupower.1 + - rm -f $(DESTDIR)${mandir}/man1/cpupower-frequency-set.1 + - rm -f $(DESTDIR)${mandir}/man1/cpupower-frequency-info.1 + - rm -f $(DESTDIR)${mandir}/man1/cpupower-set.1 + - rm -f $(DESTDIR)${mandir}/man1/cpupower-info.1 + - rm -f $(DESTDIR)${mandir}/man1/cpupower-monitor.1 + - for HLANG in $(LANGUAGES); do \ + rm -f $(DESTDIR)${localedir}/$$HLANG/LC_MESSAGES/cpupower.mo; \ + done; + +.PHONY: all utils libcpupower update-po create-gmo install-lib install-tools install-man install-gmo install uninstall clean diff --git a/tools/power/cpupower/README b/tools/power/cpupower/README new file mode 100644 index 000000000..1c68f4766 --- /dev/null +++ b/tools/power/cpupower/README @@ -0,0 +1,47 @@ +The cpupower package consists of the following elements: + +requirements +------------ + +On x86 pciutils is needed at runtime (-lpci). +For compilation pciutils-devel (pci/pci.h) and a gcc version +providing cpuid.h is needed. +For both it's not explicitly checked for (yet). + + +libcpupower +---------- + +"libcpupower" is a library which offers a unified access method for userspace +tools and programs to the cpufreq core and drivers in the Linux kernel. This +allows for code reduction in userspace tools, a clean implementation of +the interaction to the cpufreq core, and support for both the sysfs and proc +interfaces [depending on configuration, see below]. + + +compilation and installation +---------------------------- + +make +su +make install + +should suffice on most systems. It builds libcpupower to put in +/usr/lib; cpupower, cpufreq-bench_plot.sh to put in /usr/bin; and +cpufreq-bench to put in /usr/sbin. If you want to set up the paths +differently and/or want to configure the package to your specific +needs, you need to open "Makefile" with an editor of your choice and +edit the block marked CONFIGURATION. + + +THANKS +------ +Many thanks to Mattia Dongili who wrote the autotoolization and +libtoolization, the manpages and the italian language file for cpupower; +to Dave Jones for his feedback and his dump_psb tool; to Bruno Ducrot for his +powernow-k8-decode and intel_gsic tools as well as the french language file; +and to various others commenting on the previous (pre-)releases of +cpupower. + + + Dominik Brodowski diff --git a/tools/power/cpupower/ToDo b/tools/power/cpupower/ToDo new file mode 100644 index 000000000..b196a139a --- /dev/null +++ b/tools/power/cpupower/ToDo @@ -0,0 +1,24 @@ +ToDos sorted by priority: + +- Use bitmask functions to parse CPU topology more robust + (current implementation has issues on AMD) +- Try to read out boost states and frequencies on Intel +- Somewhere saw the ability to read power consumption of + RAM from HW on Intel SandyBridge -> another monitor? +- Add another c1e debug idle monitor + -> Is by design racy with BIOS, but could be added + with a --force option and some "be careful" messages +- Add cpu_start()/cpu_stop() callbacks for monitor + -> This is to move the per_cpu logic from inside the + monitor to outside it. This can be given higher + priority in fork_it. +- Fork as many processes as there are CPUs in case the + per_cpu_schedule flag is set. + -> Bind forked process to each cpu. + -> Execute start measures via the forked processes on + each cpu. + -> Run test executable in a forked process. + -> Execute stop measures via the forked processes on + each cpu. + This would be ideal as it will not introduce noise in the + tested executable. diff --git a/tools/power/cpupower/bench/Makefile b/tools/power/cpupower/bench/Makefile new file mode 100644 index 000000000..d9d9923af --- /dev/null +++ b/tools/power/cpupower/bench/Makefile @@ -0,0 +1,43 @@ +# SPDX-License-Identifier: GPL-2.0 +OUTPUT := ./ +ifeq ("$(origin O)", "command line") +ifneq ($(O),) + OUTPUT := $(O)/ +endif +endif + +ifeq ($(strip $(STATIC)),true) +LIBS = -L../ -L$(OUTPUT) -lm +OBJS = $(OUTPUT)main.o $(OUTPUT)parse.o $(OUTPUT)system.o $(OUTPUT)benchmark.o \ + $(OUTPUT)../lib/cpufreq.o $(OUTPUT)../lib/cpupower.o +else +LIBS = -L../ -L$(OUTPUT) -lm -lcpupower +OBJS = $(OUTPUT)main.o $(OUTPUT)parse.o $(OUTPUT)system.o $(OUTPUT)benchmark.o +endif + +CFLAGS += -D_GNU_SOURCE -I../lib -DDEFAULT_CONFIG_FILE=\"$(confdir)/cpufreq-bench.conf\" + +$(OUTPUT)%.o : %.c + $(ECHO) " CC " $@ + $(QUIET) $(CC) -c $(CFLAGS) $< -o $@ + +$(OUTPUT)cpufreq-bench: $(OBJS) + $(ECHO) " CC " $@ + $(QUIET) $(CC) -o $@ $(CFLAGS) $(LDFLAGS) $(OBJS) $(LIBS) + +all: $(OUTPUT)cpufreq-bench + +install: $(OUTPUT)cpufreq-bench + mkdir -p $(DESTDIR)/$(sbindir) + mkdir -p $(DESTDIR)/$(bindir) + mkdir -p $(DESTDIR)/$(docdir) + mkdir -p $(DESTDIR)/$(confdir) + install -m 755 $(OUTPUT)cpufreq-bench $(DESTDIR)/$(sbindir)/cpufreq-bench + install -m 755 cpufreq-bench_plot.sh $(DESTDIR)/$(bindir)/cpufreq-bench_plot.sh + install -m 644 README-BENCH $(DESTDIR)/$(docdir)/README-BENCH + install -m 755 cpufreq-bench_script.sh $(DESTDIR)/$(docdir)/cpufreq-bench_script.sh + install -m 644 example.cfg $(DESTDIR)/$(confdir)/cpufreq-bench.conf + +clean: + rm -f $(OUTPUT)*.o + rm -f $(OUTPUT)cpufreq-bench diff --git a/tools/power/cpupower/bench/README-BENCH b/tools/power/cpupower/bench/README-BENCH new file mode 100644 index 000000000..97727aed6 --- /dev/null +++ b/tools/power/cpupower/bench/README-BENCH @@ -0,0 +1,124 @@ +This is cpufreq-bench, a microbenchmark for the cpufreq framework. + +Purpose +======= + +What is this benchmark for: + - Identify worst case performance loss when doing dynamic frequency + scaling using Linux kernel governors + - Identify average reaction time of a governor to CPU load changes + - (Stress) Testing whether a cpufreq low level driver or governor works + as expected + - Identify cpufreq related performance regressions between kernels + - Possibly Real time priority testing? -> what happens if there are + processes with a higher prio than the governor's kernel thread + - ... + +What this benchmark does *not* cover: + - Power saving related regressions (In fact as better the performance + throughput is, the worse the power savings will be, but the first should + mostly count more...) + - Real world (workloads) + + +Description +=========== + +cpufreq-bench helps to test the condition of a given cpufreq governor. +For that purpose, it compares the performance governor to a configured +powersave module. + + +How it works +============ +You can specify load (100% CPU load) and sleep (0% CPU load) times in us which +will be run X time in a row (cycles): + + sleep=25000 + load=25000 + cycles=20 + +This part of the configuration file will create 25ms load/sleep turns, +repeated 20 times. + +Adding this: + sleep_step=25000 + load_step=25000 + rounds=5 +Will increase load and sleep time by 25ms 5 times. +Together you get following test: +25ms load/sleep time repeated 20 times (cycles). +50ms load/sleep time repeated 20 times (cycles). +.. +100ms load/sleep time repeated 20 times (cycles). + +First it is calibrated how long a specific CPU intensive calculation +takes on this machine and needs to be run in a loop using the performance +governor. +Then the above test runs are processed using the performance governor +and the governor to test. The time the calculation really needed +with the dynamic freq scaling governor is compared with the time needed +on full performance and you get the overall performance loss. + + +Example of expected results with ondemand governor: + +This shows expected results of the first two test run rounds from +above config, you there have: + +100% CPU load (load) | 0 % CPU load (sleep) | round + 25 ms | 25 ms | 1 + 50 ms | 50 ms | 2 + +For example if ondemand governor is configured to have a 50ms +sampling rate you get: + +In round 1, ondemand should have rather static 50% load and probably +won't ever switch up (as long as up_threshold is above). + +In round 2, if the ondemand sampling times exactly match the load/sleep +trigger of the cpufreq-bench, you will see no performance loss (compare with +below possible ondemand sample kick ins (1)): + +But if ondemand always kicks in in the middle of the load sleep cycles, it +will always see 50% loads and you get worst performance impact never +switching up (compare with below possible ondemand sample kick ins (2)):: + + 50 50 50 50ms ->time +load -----| |-----| |-----| |-----| + | | | | | | | +sleep |-----| |-----| |-----| |---- + |-----|-----|-----|-----|-----|-----|-----|---- ondemand sampling (1) + 100 0 100 0 100 0 100 load seen by ondemand(%) + |-----|-----|-----|-----|-----|-----|-----|-- ondemand sampling (2) + 50 50 50 50 50 50 50 load seen by ondemand(%) + +You can easily test all kind of load/sleep times and check whether your +governor in average behaves as expected. + + +ToDo +==== + +Provide a gnuplot utility script for easy generation of plots to present +the outcome nicely. + + +cpufreq-bench Command Usage +=========================== +-l, --load=<long int> initial load time in us +-s, --sleep=<long int> initial sleep time in us +-x, --load-step=<long int> time to be added to load time, in us +-y, --sleep-step=<long int> time to be added to sleep time, in us +-c, --cpu=<unsigned int> CPU Number to use, starting at 0 +-p, --prio=<priority> scheduler priority, HIGH, LOW or DEFAULT +-g, --governor=<governor> cpufreq governor to test +-n, --cycles=<int> load/sleep cycles to get an average value to compare +-r, --rounds<int> load/sleep rounds +-f, --file=<configfile> config file to use +-o, --output=<dir> output dir, must exist +-v, --verbose verbose output on/off + +Due to the high priority, the application may not be responsible for some time. +After the benchmark, the logfile is saved in OUTPUTDIR/benchmark_TIMESTAMP.log + diff --git a/tools/power/cpupower/bench/benchmark.c b/tools/power/cpupower/bench/benchmark.c new file mode 100644 index 000000000..c7234cf3f --- /dev/null +++ b/tools/power/cpupower/bench/benchmark.c @@ -0,0 +1,181 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* cpufreq-bench CPUFreq microbenchmark + * + * Copyright (C) 2008 Christian Kornacker <ckornacker@suse.de> + */ + +#include <stdio.h> +#include <unistd.h> +#include <math.h> + +#include "config.h" +#include "system.h" +#include "benchmark.h" + +/* Print out progress if we log into a file */ +#define show_progress(total_time, progress_time) \ +if (config->output != stdout) { \ + fprintf(stdout, "Progress: %02lu %%\r", \ + (progress_time * 100) / total_time); \ + fflush(stdout); \ +} + +/** + * compute how many rounds of calculation we should do + * to get the given load time + * + * @param load aimed load time in µs + * + * @retval rounds of calculation + **/ + +unsigned int calculate_timespace(long load, struct config *config) +{ + int i; + long long now, then; + unsigned int estimated = GAUGECOUNT; + unsigned int rounds = 0; + unsigned int timed = 0; + + if (config->verbose) + printf("calibrating load of %lius, please wait...\n", load); + + /* get the initial calculation time for a specific number of rounds */ + now = get_time(); + ROUNDS(estimated); + then = get_time(); + + timed = (unsigned int)(then - now); + + /* approximation of the wanted load time by comparing with the + * initial calculation time */ + for (i = 0; i < 4; i++) { + rounds = (unsigned int)(load * estimated / timed); + dprintf("calibrating with %u rounds\n", rounds); + now = get_time(); + ROUNDS(rounds); + then = get_time(); + + timed = (unsigned int)(then - now); + estimated = rounds; + } + if (config->verbose) + printf("calibration done\n"); + + return estimated; +} + +/** + * benchmark + * generates a specific sleep an load time with the performance + * governor and compares the used time for same calculations done + * with the configured powersave governor + * + * @param config config values for the benchmark + * + **/ + +void start_benchmark(struct config *config) +{ + unsigned int _round, cycle; + long long now, then; + long sleep_time = 0, load_time = 0; + long performance_time = 0, powersave_time = 0; + unsigned int calculations; + unsigned long total_time = 0, progress_time = 0; + + sleep_time = config->sleep; + load_time = config->load; + + /* For the progress bar */ + for (_round = 1; _round <= config->rounds; _round++) + total_time += _round * (config->sleep + config->load); + total_time *= 2; /* powersave and performance cycles */ + + for (_round = 0; _round < config->rounds; _round++) { + performance_time = 0LL; + powersave_time = 0LL; + + show_progress(total_time, progress_time); + + /* set the cpufreq governor to "performance" which disables + * P-State switching. */ + if (set_cpufreq_governor("performance", config->cpu) != 0) + return; + + /* calibrate the calculation time. the resulting calculation + * _rounds should produce a load which matches the configured + * load time */ + calculations = calculate_timespace(load_time, config); + + if (config->verbose) + printf("_round %i: doing %u cycles with %u calculations" + " for %lius\n", _round + 1, config->cycles, + calculations, load_time); + + fprintf(config->output, "%u %li %li ", + _round, load_time, sleep_time); + + if (config->verbose) + printf("average: %lius, rps:%li\n", + load_time / calculations, + 1000000 * calculations / load_time); + + /* do some sleep/load cycles with the performance governor */ + for (cycle = 0; cycle < config->cycles; cycle++) { + now = get_time(); + usleep(sleep_time); + ROUNDS(calculations); + then = get_time(); + performance_time += then - now - sleep_time; + if (config->verbose) + printf("performance cycle took %lius, " + "sleep: %lius, " + "load: %lius, rounds: %u\n", + (long)(then - now), sleep_time, + load_time, calculations); + } + fprintf(config->output, "%li ", + performance_time / config->cycles); + + progress_time += sleep_time + load_time; + show_progress(total_time, progress_time); + + /* set the powersave governor which activates P-State switching + * again */ + if (set_cpufreq_governor(config->governor, config->cpu) != 0) + return; + + /* again, do some sleep/load cycles with the + * powersave governor */ + for (cycle = 0; cycle < config->cycles; cycle++) { + now = get_time(); + usleep(sleep_time); + ROUNDS(calculations); + then = get_time(); + powersave_time += then - now - sleep_time; + if (config->verbose) + printf("powersave cycle took %lius, " + "sleep: %lius, " + "load: %lius, rounds: %u\n", + (long)(then - now), sleep_time, + load_time, calculations); + } + + progress_time += sleep_time + load_time; + + /* compare the average sleep/load cycles */ + fprintf(config->output, "%li ", + powersave_time / config->cycles); + fprintf(config->output, "%.3f\n", + performance_time * 100.0 / powersave_time); + fflush(config->output); + + if (config->verbose) + printf("performance is at %.2f%%\n", + performance_time * 100.0 / powersave_time); + + sleep_time += config->sleep_step; + load_time += config->load_step; + } +} diff --git a/tools/power/cpupower/bench/benchmark.h b/tools/power/cpupower/bench/benchmark.h new file mode 100644 index 000000000..bf612de89 --- /dev/null +++ b/tools/power/cpupower/bench/benchmark.h @@ -0,0 +1,16 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* cpufreq-bench CPUFreq microbenchmark + * + * Copyright (C) 2008 Christian Kornacker <ckornacker@suse.de> + */ + +/* load loop, this schould take about 1 to 2ms to complete */ +#define ROUNDS(x) {unsigned int rcnt; \ + for (rcnt = 0; rcnt < x*1000; rcnt++) { \ + (void)(((int)(pow(rcnt, rcnt) * \ + sqrt(rcnt*7230970)) ^ 7230716) ^ \ + (int)atan2(rcnt, rcnt)); \ + } } \ + + +void start_benchmark(struct config *config); diff --git a/tools/power/cpupower/bench/config.h b/tools/power/cpupower/bench/config.h new file mode 100644 index 000000000..fec5b0b05 --- /dev/null +++ b/tools/power/cpupower/bench/config.h @@ -0,0 +1,23 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* cpufreq-bench CPUFreq microbenchmark + * + * Copyright (C) 2008 Christian Kornacker <ckornacker@suse.de> + */ + +/* initial loop count for the load calibration */ +#define GAUGECOUNT 1500 + +/* default scheduling policy SCHED_OTHER */ +#define SCHEDULER SCHED_OTHER + +#define PRIORITY_DEFAULT 0 +#define PRIORITY_HIGH sched_get_priority_max(SCHEDULER) +#define PRIORITY_LOW sched_get_priority_min(SCHEDULER) + +/* enable further debug messages */ +#ifdef DEBUG +#define dprintf printf +#else +#define dprintf(...) do { } while (0) +#endif + diff --git a/tools/power/cpupower/bench/cpufreq-bench_plot.sh b/tools/power/cpupower/bench/cpufreq-bench_plot.sh new file mode 100644 index 000000000..f5f8b3c8f --- /dev/null +++ b/tools/power/cpupower/bench/cpufreq-bench_plot.sh @@ -0,0 +1,91 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0-or-later + + +# Author/Copyright(c): 2009, Thomas Renninger <trenn@suse.de>, Novell Inc. + +# Helper script to easily create nice plots of your cpufreq-bench results + +dir=`mktemp -d` +output_file="cpufreq-bench.png" +global_title="cpufreq-bench plot" +picture_type="jpeg" +file[0]="" + +function usage() +{ + echo "cpufreq-bench_plot.sh [OPTIONS] logfile [measure_title] [logfile [measure_title]] ...]" + echo + echo "Options" + echo " -o output_file" + echo " -t global_title" + echo " -p picture_type [jpeg|gif|png|postscript|...]" + exit 1 +} + +if [ $# -eq 0 ];then + echo "No benchmark results file provided" + echo + usage +fi + +while getopts o:t:p: name ; do + case $name in + o) + output_file="$OPTARG".$picture_type + ;; + t) + global_title="$OPTARG" + ;; + p) + picture_type="$OPTARG" + ;; + ?) + usage + ;; + esac +done +shift $(($OPTIND -1)) + +plots=0 +while [ "$1" ];do + if [ ! -f "$1" ];then + echo "File $1 does not exist" + usage + fi + file[$plots]="$1" + title[$plots]="$2" + # echo "File: ${file[$plots]} - ${title[plots]}" + shift;shift + plots=$((plots + 1)) +done + +echo "set terminal $picture_type" >> $dir/plot_script.gpl +echo "set output \"$output_file\"" >> $dir/plot_script.gpl +echo "set title \"$global_title\"" >> $dir/plot_script.gpl +echo "set xlabel \"sleep/load time\"" >> $dir/plot_script.gpl +echo "set ylabel \"Performance (%)\"" >> $dir/plot_script.gpl + +for((plot=0;plot<$plots;plot++));do + + # Sanity check + ###### I am to dump to get this redirected to stderr/stdout in one awk call... ##### + cat ${file[$plot]} |grep -v "^#" |awk '{if ($2 != $3) printf("Error in measure %d:Load time %s does not equal sleep time %s, plot will not be correct\n", $1, $2, $3); ERR=1}' + ###### I am to dump to get this redirected in one awk call... ##### + + # Parse out load time (which must be equal to sleep time for a plot), divide it by 1000 + # to get ms and parse out the performance in percentage and write it to a temp file for plotting + cat ${file[$plot]} |grep -v "^#" |awk '{printf "%lu %.1f\n",$2/1000, $6}' >$dir/data_$plot + + if [ $plot -eq 0 ];then + echo -n "plot " >> $dir/plot_script.gpl + fi + echo -n "\"$dir/data_$plot\" title \"${title[$plot]}\" with lines" >> $dir/plot_script.gpl + if [ $(($plot + 1)) -ne $plots ];then + echo -n ", " >> $dir/plot_script.gpl + fi +done +echo >> $dir/plot_script.gpl + +gnuplot $dir/plot_script.gpl +rm -r $dir diff --git a/tools/power/cpupower/bench/cpufreq-bench_script.sh b/tools/power/cpupower/bench/cpufreq-bench_script.sh new file mode 100644 index 000000000..785a3679c --- /dev/null +++ b/tools/power/cpupower/bench/cpufreq-bench_script.sh @@ -0,0 +1,88 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0-or-later + + +# Author/Copyright(c): 2009, Thomas Renninger <trenn@suse.de>, Novell Inc. + +# Ondemand up_threshold and sampling rate test script for cpufreq-bench +# mircobenchmark. +# Modify the general variables at the top or extend or copy out parts +# if you want to test other things +# + +# Default with latest kernels is 95, before micro account patches +# it was 80, cmp. with git commit 808009131046b62ac434dbc796 +UP_THRESHOLD="60 80 95" +# Depending on the kernel and the HW sampling rate could be restricted +# and cannot be set that low... +# E.g. before git commit cef9615a853ebc4972084f7 one could only set +# min sampling rate of 80000 if CONFIG_HZ=250 +SAMPLING_RATE="20000 80000" + +function measure() +{ + local -i up_threshold_set + local -i sampling_rate_set + + for up_threshold in $UP_THRESHOLD;do + for sampling_rate in $SAMPLING_RATE;do + # Set values in sysfs + echo $up_threshold >/sys/devices/system/cpu/cpu0/cpufreq/ondemand/up_threshold + echo $sampling_rate >/sys/devices/system/cpu/cpu0/cpufreq/ondemand/sampling_rate + up_threshold_set=$(cat /sys/devices/system/cpu/cpu0/cpufreq/ondemand/up_threshold) + sampling_rate_set=$(cat /sys/devices/system/cpu/cpu0/cpufreq/ondemand/sampling_rate) + + # Verify set values in sysfs + if [ ${up_threshold_set} -eq ${up_threshold} ];then + echo "up_threshold: $up_threshold, set in sysfs: ${up_threshold_set}" + else + echo "WARNING: Tried to set up_threshold: $up_threshold, set in sysfs: ${up_threshold_set}" + fi + if [ ${sampling_rate_set} -eq ${sampling_rate} ];then + echo "sampling_rate: $sampling_rate, set in sysfs: ${sampling_rate_set}" + else + echo "WARNING: Tried to set sampling_rate: $sampling_rate, set in sysfs: ${sampling_rate_set}" + fi + + # Benchmark + cpufreq-bench -o /var/log/cpufreq-bench/up_threshold_${up_threshold}_sampling_rate_${sampling_rate} + done + done +} + +function create_plots() +{ + local command + + for up_threshold in $UP_THRESHOLD;do + command="cpufreq-bench_plot.sh -o \"sampling_rate_${SAMPLING_RATE}_up_threshold_${up_threshold}\" -t \"Ondemand sampling_rate: ${SAMPLING_RATE} comparison - Up_threshold: $up_threshold %\"" + for sampling_rate in $SAMPLING_RATE;do + command="${command} /var/log/cpufreq-bench/up_threshold_${up_threshold}_sampling_rate_${sampling_rate}/* \"sampling_rate = $sampling_rate\"" + done + echo $command + eval "$command" + echo + done + + for sampling_rate in $SAMPLING_RATE;do + command="cpufreq-bench_plot.sh -o \"up_threshold_${UP_THRESHOLD}_sampling_rate_${sampling_rate}\" -t \"Ondemand up_threshold: ${UP_THRESHOLD} % comparison - sampling_rate: $sampling_rate\"" + for up_threshold in $UP_THRESHOLD;do + command="${command} /var/log/cpufreq-bench/up_threshold_${up_threshold}_sampling_rate_${sampling_rate}/* \"up_threshold = $up_threshold\"" + done + echo $command + eval "$command" + echo + done + + command="cpufreq-bench_plot.sh -o \"up_threshold_${UP_THRESHOLD}_sampling_rate_${SAMPLING_RATE}\" -t \"Ondemand up_threshold: ${UP_THRESHOLD} and sampling_rate ${SAMPLING_RATE} comparison\"" + for sampling_rate in $SAMPLING_RATE;do + for up_threshold in $UP_THRESHOLD;do + command="${command} /var/log/cpufreq-bench/up_threshold_${up_threshold}_sampling_rate_${sampling_rate}/* \"up_threshold = $up_threshold - sampling_rate = $sampling_rate\"" + done + done + echo "$command" + eval "$command" +} + +measure +create_plots diff --git a/tools/power/cpupower/bench/example.cfg b/tools/power/cpupower/bench/example.cfg new file mode 100644 index 000000000..f91f64360 --- /dev/null +++ b/tools/power/cpupower/bench/example.cfg @@ -0,0 +1,11 @@ +sleep = 50000 +load = 50000 +cpu = 0 +priority = LOW +output = /var/log/cpufreq-bench +sleep_step = 50000 +load_step = 50000 +cycles = 20 +rounds = 40 +verbose = 0 +governor = ondemand diff --git a/tools/power/cpupower/bench/main.c b/tools/power/cpupower/bench/main.c new file mode 100644 index 000000000..429d1b6b8 --- /dev/null +++ b/tools/power/cpupower/bench/main.c @@ -0,0 +1,189 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* cpufreq-bench CPUFreq microbenchmark + * + * Copyright (C) 2008 Christian Kornacker <ckornacker@suse.de> + */ + +#include <stdio.h> +#include <stdlib.h> +#include <string.h> +#include <unistd.h> +#include <getopt.h> +#include <errno.h> + +#include "config.h" +#include "system.h" +#include "benchmark.h" + +static struct option long_options[] = { + {"output", 1, 0, 'o'}, + {"sleep", 1, 0, 's'}, + {"load", 1, 0, 'l'}, + {"verbose", 0, 0, 'v'}, + {"cpu", 1, 0, 'c'}, + {"governor", 1, 0, 'g'}, + {"prio", 1, 0, 'p'}, + {"file", 1, 0, 'f'}, + {"cycles", 1, 0, 'n'}, + {"rounds", 1, 0, 'r'}, + {"load-step", 1, 0, 'x'}, + {"sleep-step", 1, 0, 'y'}, + {"help", 0, 0, 'h'}, + {0, 0, 0, 0} +}; + +/******************************************************************* + usage +*******************************************************************/ + +void usage() +{ + printf("usage: ./bench\n"); + printf("Options:\n"); + printf(" -l, --load=<long int>\t\tinitial load time in us\n"); + printf(" -s, --sleep=<long int>\t\tinitial sleep time in us\n"); + printf(" -x, --load-step=<long int>\ttime to be added to load time, in us\n"); + printf(" -y, --sleep-step=<long int>\ttime to be added to sleep time, in us\n"); + printf(" -c, --cpu=<cpu #>\t\t\tCPU Nr. to use, starting at 0\n"); + printf(" -p, --prio=<priority>\t\t\tscheduler priority, HIGH, LOW or DEFAULT\n"); + printf(" -g, --governor=<governor>\t\tcpufreq governor to test\n"); + printf(" -n, --cycles=<int>\t\t\tload/sleep cycles\n"); + printf(" -r, --rounds<int>\t\t\tload/sleep rounds\n"); + printf(" -f, --file=<configfile>\t\tconfig file to use\n"); + printf(" -o, --output=<dir>\t\t\toutput path. Filename will be OUTPUTPATH/benchmark_TIMESTAMP.log\n"); + printf(" -v, --verbose\t\t\t\tverbose output on/off\n"); + printf(" -h, --help\t\t\t\tPrint this help screen\n"); + exit(1); +} + +/******************************************************************* + main +*******************************************************************/ + +int main(int argc, char **argv) +{ + int c; + int option_index = 0; + struct config *config = NULL; + + config = prepare_default_config(); + + if (config == NULL) + return EXIT_FAILURE; + + while (1) { + c = getopt_long (argc, argv, "hg:o:s:l:vc:p:f:n:r:x:y:", + long_options, &option_index); + if (c == -1) + break; + + switch (c) { + case 'o': + if (config->output != NULL) + fclose(config->output); + + config->output = prepare_output(optarg); + + if (config->output == NULL) + return EXIT_FAILURE; + + dprintf("user output path -> %s\n", optarg); + break; + case 's': + sscanf(optarg, "%li", &config->sleep); + dprintf("user sleep time -> %s\n", optarg); + break; + case 'l': + sscanf(optarg, "%li", &config->load); + dprintf("user load time -> %s\n", optarg); + break; + case 'c': + sscanf(optarg, "%u", &config->cpu); + dprintf("user cpu -> %s\n", optarg); + break; + case 'g': + strncpy(config->governor, optarg, 14); + dprintf("user governor -> %s\n", optarg); + break; + case 'p': + if (string_to_prio(optarg) != SCHED_ERR) { + config->prio = string_to_prio(optarg); + dprintf("user prio -> %s\n", optarg); + } else { + if (config != NULL) { + if (config->output != NULL) + fclose(config->output); + free(config); + } + usage(); + } + break; + case 'n': + sscanf(optarg, "%u", &config->cycles); + dprintf("user cycles -> %s\n", optarg); + break; + case 'r': + sscanf(optarg, "%u", &config->rounds); + dprintf("user rounds -> %s\n", optarg); + break; + case 'x': + sscanf(optarg, "%li", &config->load_step); + dprintf("user load_step -> %s\n", optarg); + break; + case 'y': + sscanf(optarg, "%li", &config->sleep_step); + dprintf("user sleep_step -> %s\n", optarg); + break; + case 'f': + if (prepare_config(optarg, config)) + return EXIT_FAILURE; + break; + case 'v': + config->verbose = 1; + dprintf("verbose output enabled\n"); + break; + case 'h': + case '?': + default: + if (config != NULL) { + if (config->output != NULL) + fclose(config->output); + free(config); + } + usage(); + } + } + + if (config->verbose) { + printf("starting benchmark with parameters:\n"); + printf("config:\n\t" + "sleep=%li\n\t" + "load=%li\n\t" + "sleep_step=%li\n\t" + "load_step=%li\n\t" + "cpu=%u\n\t" + "cycles=%u\n\t" + "rounds=%u\n\t" + "governor=%s\n\n", + config->sleep, + config->load, + config->sleep_step, + config->load_step, + config->cpu, + config->cycles, + config->rounds, + config->governor); + } + + prepare_user(config); + prepare_system(config); + start_benchmark(config); + + if (config->output != stdout) + fclose(config->output); + + free(config); + + return EXIT_SUCCESS; +} + diff --git a/tools/power/cpupower/bench/parse.c b/tools/power/cpupower/bench/parse.c new file mode 100644 index 000000000..e63dc11fa --- /dev/null +++ b/tools/power/cpupower/bench/parse.c @@ -0,0 +1,225 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* cpufreq-bench CPUFreq microbenchmark + * + * Copyright (C) 2008 Christian Kornacker <ckornacker@suse.de> + */ + +#include <stdio.h> +#include <stdlib.h> +#include <stdarg.h> +#include <string.h> +#include <time.h> +#include <dirent.h> + +#include <sys/utsname.h> +#include <sys/types.h> +#include <sys/stat.h> + +#include "parse.h" +#include "config.h" + +/** + * converts priority string to priority + * + * @param str string that represents a scheduler priority + * + * @retval priority + * @retval SCHED_ERR when the priority doesn't exit + **/ + +enum sched_prio string_to_prio(const char *str) +{ + if (strncasecmp("high", str, strlen(str)) == 0) + return SCHED_HIGH; + else if (strncasecmp("default", str, strlen(str)) == 0) + return SCHED_DEFAULT; + else if (strncasecmp("low", str, strlen(str)) == 0) + return SCHED_LOW; + else + return SCHED_ERR; +} + +/** + * create and open logfile + * + * @param dir directory in which the logfile should be created + * + * @retval logfile on success + * @retval NULL when the file can't be created + **/ + +FILE *prepare_output(const char *dirname) +{ + FILE *output = NULL; + int len; + char *filename, *filename_tmp; + struct utsname sysdata; + DIR *dir; + + dir = opendir(dirname); + if (dir == NULL) { + if (mkdir(dirname, 0755)) { + perror("mkdir"); + fprintf(stderr, "error: Cannot create dir %s\n", + dirname); + return NULL; + } + } + + len = strlen(dirname) + 30; + filename = malloc(sizeof(char) * len); + if (!filename) { + perror("malloc"); + goto out_dir; + } + + if (uname(&sysdata) == 0) { + len += strlen(sysdata.nodename) + strlen(sysdata.release); + filename_tmp = realloc(filename, sizeof(*filename) * len); + + if (filename_tmp == NULL) { + free(filename); + perror("realloc"); + goto out_dir; + } + + filename = filename_tmp; + snprintf(filename, len - 1, "%s/benchmark_%s_%s_%li.log", + dirname, sysdata.nodename, sysdata.release, time(NULL)); + } else { + snprintf(filename, len - 1, "%s/benchmark_%li.log", + dirname, time(NULL)); + } + + dprintf("logfilename: %s\n", filename); + + output = fopen(filename, "w+"); + if (output == NULL) { + perror("fopen"); + fprintf(stderr, "error: unable to open logfile\n"); + goto out; + } + + fprintf(stdout, "Logfile: %s\n", filename); + + fprintf(output, "#round load sleep performance powersave percentage\n"); +out: + free(filename); +out_dir: + closedir(dir); + return output; +} + +/** + * returns the default config + * + * @retval default config on success + * @retval NULL when the output file can't be created + **/ + +struct config *prepare_default_config() +{ + struct config *config = malloc(sizeof(struct config)); + + dprintf("loading defaults\n"); + + config->sleep = 500000; + config->load = 500000; + config->sleep_step = 500000; + config->load_step = 500000; + config->cycles = 5; + config->rounds = 50; + config->cpu = 0; + config->prio = SCHED_HIGH; + config->verbose = 0; + strncpy(config->governor, "ondemand", sizeof(config->governor)); + + config->output = stdout; + +#ifdef DEFAULT_CONFIG_FILE + if (prepare_config(DEFAULT_CONFIG_FILE, config)) + return NULL; +#endif + return config; +} + +/** + * parses config file and returns the config to the caller + * + * @param path config file name + * + * @retval 1 on error + * @retval 0 on success + **/ + +int prepare_config(const char *path, struct config *config) +{ + size_t len = 0; + char opt[16], val[32], *line = NULL; + FILE *configfile; + + if (config == NULL) { + fprintf(stderr, "error: config is NULL\n"); + return 1; + } + + configfile = fopen(path, "r"); + if (configfile == NULL) { + perror("fopen"); + fprintf(stderr, "error: unable to read configfile\n"); + free(config); + return 1; + } + + while (getline(&line, &len, configfile) != -1) { + if (line[0] == '#' || line[0] == ' ' || line[0] == '\n') + continue; + + if (sscanf(line, "%14s = %30s", opt, val) < 2) + continue; + + dprintf("parsing: %s -> %s\n", opt, val); + + if (strcmp("sleep", opt) == 0) + sscanf(val, "%li", &config->sleep); + + else if (strcmp("load", opt) == 0) + sscanf(val, "%li", &config->load); + + else if (strcmp("load_step", opt) == 0) + sscanf(val, "%li", &config->load_step); + + else if (strcmp("sleep_step", opt) == 0) + sscanf(val, "%li", &config->sleep_step); + + else if (strcmp("cycles", opt) == 0) + sscanf(val, "%u", &config->cycles); + + else if (strcmp("rounds", opt) == 0) + sscanf(val, "%u", &config->rounds); + + else if (strcmp("verbose", opt) == 0) + sscanf(val, "%u", &config->verbose); + + else if (strcmp("output", opt) == 0) + config->output = prepare_output(val); + + else if (strcmp("cpu", opt) == 0) + sscanf(val, "%u", &config->cpu); + + else if (strcmp("governor", opt) == 0) { + strncpy(config->governor, val, + sizeof(config->governor)); + config->governor[sizeof(config->governor) - 1] = '\0'; + } + + else if (strcmp("priority", opt) == 0) { + if (string_to_prio(val) != SCHED_ERR) + config->prio = string_to_prio(val); + } + } + + free(line); + + return 0; +} diff --git a/tools/power/cpupower/bench/parse.h b/tools/power/cpupower/bench/parse.h new file mode 100644 index 000000000..d5b3e34d7 --- /dev/null +++ b/tools/power/cpupower/bench/parse.h @@ -0,0 +1,40 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* cpufreq-bench CPUFreq microbenchmark + * + * Copyright (C) 2008 Christian Kornacker <ckornacker@suse.de> + */ + +/* struct that holds the required config parameters */ +struct config +{ + long sleep; /* sleep time in µs */ + long load; /* load time in µs */ + long sleep_step; /* time value which changes the + * sleep time after every round in µs */ + long load_step; /* time value which changes the + * load time after every round in µs */ + unsigned int cycles; /* calculation cycles with the same sleep/load time */ + unsigned int rounds; /* calculation rounds with iterated sleep/load time */ + unsigned int cpu; /* cpu for which the affinity is set */ + char governor[15]; /* cpufreq governor */ + enum sched_prio /* possible scheduler priorities */ + { + SCHED_ERR = -1, + SCHED_HIGH, + SCHED_DEFAULT, + SCHED_LOW + } prio; + + unsigned int verbose; /* verbose output */ + FILE *output; /* logfile */ + char *output_filename; /* logfile name, must be freed at the end + if output != NULL and output != stdout*/ +}; + +enum sched_prio string_to_prio(const char *str); + +FILE *prepare_output(const char *dir); + +int prepare_config(const char *path, struct config *config); +struct config *prepare_default_config(); + diff --git a/tools/power/cpupower/bench/system.c b/tools/power/cpupower/bench/system.c new file mode 100644 index 000000000..40f3679e7 --- /dev/null +++ b/tools/power/cpupower/bench/system.c @@ -0,0 +1,179 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* cpufreq-bench CPUFreq microbenchmark + * + * Copyright (C) 2008 Christian Kornacker <ckornacker@suse.de> + */ + +#include <stdio.h> +#include <time.h> +#include <sys/time.h> +#include <sys/types.h> +#include <unistd.h> + +#include <sched.h> + +#include <cpufreq.h> +#include <cpupower.h> + +#include "config.h" +#include "system.h" + +/** + * returns time since epoch in µs + * + * @retval time + **/ + +long long int get_time() +{ + struct timeval now; + + gettimeofday(&now, NULL); + + return (long long int)(now.tv_sec * 1000000LL + now.tv_usec); +} + +/** + * sets the cpufreq governor + * + * @param governor cpufreq governor name + * @param cpu cpu for which the governor should be set + * + * @retval 0 on success + * @retval -1 when failed + **/ + +int set_cpufreq_governor(char *governor, unsigned int cpu) +{ + + dprintf("set %s as cpufreq governor\n", governor); + + if (cpupower_is_cpu_online(cpu) != 1) { + perror("cpufreq_cpu_exists"); + fprintf(stderr, "error: cpu %u does not exist\n", cpu); + return -1; + } + + if (cpufreq_modify_policy_governor(cpu, governor) != 0) { + perror("cpufreq_modify_policy_governor"); + fprintf(stderr, "error: unable to set %s governor\n", governor); + return -1; + } + + return 0; +} + +/** + * sets cpu affinity for the process + * + * @param cpu cpu# to which the affinity should be set + * + * @retval 0 on success + * @retval -1 when setting the affinity failed + **/ + +int set_cpu_affinity(unsigned int cpu) +{ + cpu_set_t cpuset; + + CPU_ZERO(&cpuset); + CPU_SET(cpu, &cpuset); + + dprintf("set affinity to cpu #%u\n", cpu); + + if (sched_setaffinity(getpid(), sizeof(cpu_set_t), &cpuset) < 0) { + perror("sched_setaffinity"); + fprintf(stderr, "warning: unable to set cpu affinity\n"); + return -1; + } + + return 0; +} + +/** + * sets the process priority parameter + * + * @param priority priority value + * + * @retval 0 on success + * @retval -1 when setting the priority failed + **/ + +int set_process_priority(int priority) +{ + struct sched_param param; + + dprintf("set scheduler priority to %i\n", priority); + + param.sched_priority = priority; + + if (sched_setscheduler(0, SCHEDULER, ¶m) < 0) { + perror("sched_setscheduler"); + fprintf(stderr, "warning: unable to set scheduler priority\n"); + return -1; + } + + return 0; +} + +/** + * notifies the user that the benchmark may run some time + * + * @param config benchmark config values + * + **/ + +void prepare_user(const struct config *config) +{ + unsigned long sleep_time = 0; + unsigned long load_time = 0; + unsigned int round; + + for (round = 0; round < config->rounds; round++) { + sleep_time += 2 * config->cycles * + (config->sleep + config->sleep_step * round); + load_time += 2 * config->cycles * + (config->load + config->load_step * round) + + (config->load + config->load_step * round * 4); + } + + if (config->verbose || config->output != stdout) + printf("approx. test duration: %im\n", + (int)((sleep_time + load_time) / 60000000)); +} + +/** + * sets up the cpu affinity and scheduler priority + * + * @param config benchmark config values + * + **/ + +void prepare_system(const struct config *config) +{ + if (config->verbose) + printf("set cpu affinity to cpu #%u\n", config->cpu); + + set_cpu_affinity(config->cpu); + + switch (config->prio) { + case SCHED_HIGH: + if (config->verbose) + printf("high priority condition requested\n"); + + set_process_priority(PRIORITY_HIGH); + break; + case SCHED_LOW: + if (config->verbose) + printf("low priority condition requested\n"); + + set_process_priority(PRIORITY_LOW); + break; + default: + if (config->verbose) + printf("default priority condition requested\n"); + + set_process_priority(PRIORITY_DEFAULT); + } +} + diff --git a/tools/power/cpupower/bench/system.h b/tools/power/cpupower/bench/system.h new file mode 100644 index 000000000..530fa2823 --- /dev/null +++ b/tools/power/cpupower/bench/system.h @@ -0,0 +1,16 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* cpufreq-bench CPUFreq microbenchmark + * + * Copyright (C) 2008 Christian Kornacker <ckornacker@suse.de> + */ + +#include "parse.h" + +long long get_time(); + +int set_cpufreq_governor(char *governor, unsigned int cpu); +int set_cpu_affinity(unsigned int cpu); +int set_process_priority(int priority); + +void prepare_user(const struct config *config); +void prepare_system(const struct config *config); diff --git a/tools/power/cpupower/cpupower-completion.sh b/tools/power/cpupower/cpupower-completion.sh new file mode 100644 index 000000000..e10839cfc --- /dev/null +++ b/tools/power/cpupower/cpupower-completion.sh @@ -0,0 +1,128 @@ +# -*- shell-script -*- +# bash completion script for cpupower +# Taken from git.git's completion script. + +_cpupower_commands="frequency-info frequency-set idle-info idle-set set info monitor" + +_frequency_info () +{ + local flags="-f -w -l -d -p -g -a -s -y -o -m -n --freq --hwfreq --hwlimits --driver --policy --governors --related-cpus --affected-cpus --stats --latency --proc --human --no-rounding" + local prev="${COMP_WORDS[COMP_CWORD-1]}" + local cur="${COMP_WORDS[COMP_CWORD]}" + case "$prev" in + frequency-info) COMPREPLY=($(compgen -W "$flags" -- "$cur")) ;; + esac +} + +_frequency_set () +{ + local flags="-f -g --freq --governor -d --min -u --max -r --related" + local prev="${COMP_WORDS[COMP_CWORD-1]}" + local cur="${COMP_WORDS[COMP_CWORD]}" + case "$prev" in + -f| --freq | -d | --min | -u | --max) + if [ -d /sys/devices/system/cpu/cpufreq/ ] ; then + COMPREPLY=($(compgen -W '$(cat $(ls -d /sys/devices/system/cpu/cpufreq/policy* | head -1)/scaling_available_frequencies)' -- "$cur")) + fi ;; + -g| --governor) + if [ -d /sys/devices/system/cpu/cpufreq/ ] ; then + COMPREPLY=($(compgen -W '$(cat $(ls -d /sys/devices/system/cpu/cpufreq/policy* | head -1)/scaling_available_governors)' -- "$cur")) + fi;; + frequency-set) COMPREPLY=($(compgen -W "$flags" -- "$cur")) ;; + esac +} + +_idle_info() +{ + local flags="-f --silent" + local prev="${COMP_WORDS[COMP_CWORD-1]}" + local cur="${COMP_WORDS[COMP_CWORD]}" + case "$prev" in + idle-info) COMPREPLY=($(compgen -W "$flags" -- "$cur")) ;; + esac +} + +_idle_set() +{ + local flags="-d --disable -e --enable -D --disable-by-latency -E --enable-all" + local prev="${COMP_WORDS[COMP_CWORD-1]}" + local cur="${COMP_WORDS[COMP_CWORD]}" + case "$prev" in + idle-set) COMPREPLY=($(compgen -W "$flags" -- "$cur")) ;; + esac +} + +_set() +{ + local flags="--perf-bias, -b" + local prev="${COMP_WORDS[COMP_CWORD-1]}" + local cur="${COMP_WORDS[COMP_CWORD]}" + case "$prev" in + set) COMPREPLY=($(compgen -W "$flags" -- "$cur")) ;; + esac +} + +_monitor() +{ + local flags="-l -m -i -c -v" + local prev="${COMP_WORDS[COMP_CWORD-1]}" + local cur="${COMP_WORDS[COMP_CWORD]}" + case "$prev" in + monitor) COMPREPLY=($(compgen -W "$flags" -- "$cur")) ;; + esac +} + +_taskset() +{ + local prev_to_prev="${COMP_WORDS[COMP_CWORD-2]}" + local prev="${COMP_WORDS[COMP_CWORD-1]}" + local cur="${COMP_WORDS[COMP_CWORD]}" + case "$prev_to_prev" in + -c|--cpu) COMPREPLY=($(compgen -W "$_cpupower_commands" -- "$cur")) ;; + esac + case "$prev" in + frequency-info) _frequency_info ;; + frequency-set) _frequency_set ;; + idle-info) _idle_info ;; + idle-set) _idle_set ;; + set) _set ;; + monitor) _monitor ;; + esac + +} + +_cpupower () +{ + local i + local c=1 + local command + + while test $c -lt $COMP_CWORD; do + if test $c == 1; then + command="${COMP_WORDS[c]}" + fi + c=$((++c)) + done + + # Complete name of subcommand if the user has not finished typing it yet. + if test $c -eq $COMP_CWORD -a -z "$command"; then + COMPREPLY=($(compgen -W "help -v --version -c --cpu $_cpupower_commands" -- "${COMP_WORDS[COMP_CWORD]}")) + return + fi + + # Complete arguments to subcommands. + case "$command" in + -v|--version) return ;; + -c|--cpu) _taskset ;; + help) COMPREPLY=($(compgen -W "$_cpupower_commands" -- "${COMP_WORDS[COMP_CWORD]}")) ;; + frequency-info) _frequency_info ;; + frequency-set) _frequency_set ;; + idle-info) _idle_info ;; + idle-set) _idle_set ;; + set) _set ;; + monitor) _monitor ;; + esac +} + +complete -o bashdefault -o default -F _cpupower cpupower 2>/dev/null \ + || complete -o default -F _cpupower cpupower diff --git a/tools/power/cpupower/debug/i386/Makefile b/tools/power/cpupower/debug/i386/Makefile new file mode 100644 index 000000000..b3f771039 --- /dev/null +++ b/tools/power/cpupower/debug/i386/Makefile @@ -0,0 +1,42 @@ +# SPDX-License-Identifier: GPL-2.0 +OUTPUT=./ +ifeq ("$(origin O)", "command line") + OUTPUT := $(O)/ +endif + +DESTDIR = +bindir = /usr/bin + +INSTALL = /usr/bin/install + + +default: all + +$(OUTPUT)centrino-decode: centrino-decode.c + $(CC) $(CFLAGS) -o $@ centrino-decode.c + +$(OUTPUT)dump_psb: dump_psb.c + $(CC) $(CFLAGS) -o $@ dump_psb.c + +$(OUTPUT)intel_gsic: intel_gsic.c + $(CC) $(CFLAGS) -o $@ -llrmi intel_gsic.c + +$(OUTPUT)powernow-k8-decode: powernow-k8-decode.c + $(CC) $(CFLAGS) -o $@ powernow-k8-decode.c + +all: $(OUTPUT)centrino-decode $(OUTPUT)dump_psb $(OUTPUT)intel_gsic $(OUTPUT)powernow-k8-decode + +clean: + rm -rf $(OUTPUT)centrino-decode + rm -rf $(OUTPUT)dump_psb + rm -rf $(OUTPUT)intel_gsic + rm -rf $(OUTPUT)powernow-k8-decode + +install: + $(INSTALL) -d $(DESTDIR)${bindir} + $(INSTALL) $(OUTPUT)centrino-decode $(DESTDIR)${bindir} + $(INSTALL) $(OUTPUT)powernow-k8-decode $(DESTDIR)${bindir} + $(INSTALL) $(OUTPUT)dump_psb $(DESTDIR)${bindir} + $(INSTALL) $(OUTPUT)intel_gsic $(DESTDIR)${bindir} + +.PHONY: all default clean install diff --git a/tools/power/cpupower/debug/i386/centrino-decode.c b/tools/power/cpupower/debug/i386/centrino-decode.c new file mode 100644 index 000000000..700cd31a7 --- /dev/null +++ b/tools/power/cpupower/debug/i386/centrino-decode.c @@ -0,0 +1,112 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * (C) 2003 - 2004 Dominik Brodowski <linux@dominikbrodowski.de> + * + * Based on code found in + * linux/arch/i386/kernel/cpu/cpufreq/speedstep-centrino.c + * and originally developed by Jeremy Fitzhardinge. + * + * USAGE: simply run it to decode the current settings on CPU 0, + * or pass the CPU number as argument, or pass the MSR content + * as argument. + */ + +#include <stdio.h> +#include <stdlib.h> +#include <stdint.h> +#include <unistd.h> +#include <errno.h> +#include <fcntl.h> + +#include <sys/types.h> +#include <sys/stat.h> + +#define MCPU 32 + +#define MSR_IA32_PERF_STATUS 0x198 + +static int rdmsr(unsigned int cpu, unsigned int msr, + unsigned int *lo, unsigned int *hi) +{ + int fd; + char file[20]; + unsigned long long val; + int retval = -1; + + *lo = *hi = 0; + + if (cpu > MCPU) + goto err1; + + sprintf(file, "/dev/cpu/%d/msr", cpu); + fd = open(file, O_RDONLY); + + if (fd < 0) + goto err1; + + if (lseek(fd, msr, SEEK_CUR) == -1) + goto err2; + + if (read(fd, &val, 8) != 8) + goto err2; + + *lo = (uint32_t )(val & 0xffffffffull); + *hi = (uint32_t )(val>>32 & 0xffffffffull); + + retval = 0; +err2: + close(fd); +err1: + return retval; +} + +static void decode (unsigned int msr) +{ + unsigned int multiplier; + unsigned int mv; + + multiplier = ((msr >> 8) & 0xFF); + + mv = (((msr & 0xFF) * 16) + 700); + + printf("0x%x means multiplier %d @ %d mV\n", msr, multiplier, mv); +} + +static int decode_live(unsigned int cpu) +{ + unsigned int lo, hi; + int err; + + err = rdmsr(cpu, MSR_IA32_PERF_STATUS, &lo, &hi); + + if (err) { + printf("can't get MSR_IA32_PERF_STATUS for cpu %d\n", cpu); + printf("Possible trouble: you don't run an Enhanced SpeedStep capable cpu\n"); + printf("or you are not root, or the msr driver is not present\n"); + return 1; + } + + decode(lo); + + return 0; +} + +int main (int argc, char **argv) +{ + unsigned int cpu, mode = 0; + + if (argc < 2) + cpu = 0; + else { + cpu = strtoul(argv[1], NULL, 0); + if (cpu >= MCPU) + mode = 1; + } + + if (mode) + decode(cpu); + else + decode_live(cpu); + + return 0; +} diff --git a/tools/power/cpupower/debug/i386/dump_psb.c b/tools/power/cpupower/debug/i386/dump_psb.c new file mode 100644 index 000000000..2c768cf70 --- /dev/null +++ b/tools/power/cpupower/debug/i386/dump_psb.c @@ -0,0 +1,196 @@ +/* + * dump_psb. (c) 2004, Dave Jones, Red Hat Inc. + * Licensed under the GPL v2. + */ + +#include <fcntl.h> +#include <stdio.h> +#include <stdlib.h> +#include <string.h> +#include <unistd.h> + +#define _GNU_SOURCE +#include <getopt.h> + +#include <sys/mman.h> + +#define LEN (0x100000 - 0xc0000) +#define OFFSET (0xc0000) + +#ifndef __packed +#define __packed __attribute((packed)) +#endif + +static long relevant; + +static const int fid_to_mult[32] = { + 110, 115, 120, 125, 50, 55, 60, 65, + 70, 75, 80, 85, 90, 95, 100, 105, + 30, 190, 40, 200, 130, 135, 140, 210, + 150, 225, 160, 165, 170, 180, -1, -1, +}; + +static const int vid_to_voltage[32] = { + 2000, 1950, 1900, 1850, 1800, 1750, 1700, 1650, + 1600, 1550, 1500, 1450, 1400, 1350, 1300, 0, + 1275, 1250, 1225, 1200, 1175, 1150, 1125, 1100, + 1075, 1050, 1024, 1000, 975, 950, 925, 0, +}; + +struct psb_header { + char signature[10]; + u_char version; + u_char flags; + u_short settlingtime; + u_char res1; + u_char numpst; +} __packed; + +struct pst_header { + u_int32_t cpuid; + u_char fsb; + u_char maxfid; + u_char startvid; + u_char numpstates; +} __packed; + +static u_int fsb; +static u_int sgtc; + +static int +decode_pst(char *p, int npstates) +{ + int i; + int freq, fid, vid; + + for (i = 0; i < npstates; ++i) { + fid = *p++; + vid = *p++; + freq = 100 * fid_to_mult[fid] * fsb; + + printf(" %2d %8dkHz FID %02x (%2d.%01d) VID %02x (%4dmV)\n", + i, + freq, + fid, fid_to_mult[fid]/10, fid_to_mult[fid]%10, + vid, vid_to_voltage[vid]); + } + + return 0; +} + +static +void decode_psb(char *p, int numpst) +{ + int i; + struct psb_header *psb; + struct pst_header *pst; + + psb = (struct psb_header*) p; + + if (psb->version != 0x12) + return; + + printf("PSB version: %hhx flags: %hhx settling time %hhuus res1 %hhx num pst %hhu\n", + psb->version, + psb->flags, + psb->settlingtime, + psb->res1, + psb->numpst); + sgtc = psb->settlingtime * 100; + + if (sgtc < 10000) + sgtc = 10000; + + p = ((char *) psb) + sizeof(struct psb_header); + + if (numpst < 0) + numpst = psb->numpst; + else + printf("Overriding number of pst :%d\n", numpst); + + for (i = 0; i < numpst; i++) { + pst = (struct pst_header*) p; + + if (relevant != 0) { + if (relevant!= pst->cpuid) + goto next_one; + } + + printf(" PST %d cpuid %.3x fsb %hhu mfid %hhx svid %hhx numberstates %hhu\n", + i+1, + pst->cpuid, + pst->fsb, + pst->maxfid, + pst->startvid, + pst->numpstates); + + fsb = pst->fsb; + decode_pst(p + sizeof(struct pst_header), pst->numpstates); + +next_one: + p += sizeof(struct pst_header) + 2*pst->numpstates; + } + +} + +static struct option info_opts[] = { + {"numpst", no_argument, NULL, 'n'}, +}; + +void print_help(void) +{ + printf ("Usage: dump_psb [options]\n"); + printf ("Options:\n"); + printf (" -n, --numpst Set number of PST tables to scan\n"); + printf (" -r, --relevant Only display PSTs relevant to cpuid N\n"); +} + +int +main(int argc, char *argv[]) +{ + int fd; + int numpst=-1; + int ret=0, cont=1; + char *mem = NULL; + char *p; + + do { + ret = getopt_long(argc, argv, "hr:n:", info_opts, NULL); + switch (ret){ + case '?': + case 'h': + print_help(); + cont = 0; + break; + case 'r': + relevant = strtol(optarg, NULL, 16); + break; + case 'n': + numpst = strtol(optarg, NULL, 10); + break; + case -1: + cont = 0; + break; + } + + } while(cont); + + fd = open("/dev/mem", O_RDONLY); + if (fd < 0) { + printf ("Couldn't open /dev/mem. Are you root?\n"); + exit(1); + } + + mem = mmap(mem, 0x100000 - 0xc0000, PROT_READ, MAP_SHARED, fd, 0xc0000); + close(fd); + + for (p = mem; p - mem < LEN; p+=16) { + if (memcmp(p, "AMDK7PNOW!", 10) == 0) { + decode_psb(p, numpst); + break; + } + } + + munmap(mem, LEN); + return 0; +} diff --git a/tools/power/cpupower/debug/i386/intel_gsic.c b/tools/power/cpupower/debug/i386/intel_gsic.c new file mode 100644 index 000000000..befd837f0 --- /dev/null +++ b/tools/power/cpupower/debug/i386/intel_gsic.c @@ -0,0 +1,77 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * (C) 2003 Bruno Ducrot + * (C) 2004 Dominik Brodowski <linux@dominikbrodowski.de> + * + * Based on code found in + * linux/include/asm-i386/ist.h and linux/arch/i386/kernel/setup.c + * and originally developed by Andy Grover <andrew.grover@intel.com> + */ + +#include <stdio.h> +#include <string.h> +#include <lrmi.h> + +int main (void) +{ + struct LRMI_regs r; + int retval; + + if (!LRMI_init()) + return 0; + + memset(&r, 0, sizeof(r)); + + r.eax = 0x0000E980; + r.edx = 0x47534943; + + retval = LRMI_int(0x15, &r); + + if (!retval) { + printf("Failed!\n"); + return 0; + } + if (r.eax == 0x47534943) { + printf("BIOS supports GSIC call:\n"); + printf("\tsignature: %c%c%c%c\n", + (r.eax >> 24) & 0xff, + (r.eax >> 16) & 0xff, + (r.eax >> 8) & 0xff, + (r.eax) & 0xff); + printf("\tcommand port = 0x%.4x\n", + r.ebx & 0xffff); + printf("\tcommand = 0x%.4x\n", + (r.ebx >> 16) & 0xffff); + printf("\tevent port = 0x%.8x\n", r.ecx); + printf("\tflags = 0x%.8x\n", r.edx); + if (((r.ebx >> 16) & 0xffff) != 0x82) { + printf("non-default command value. If speedstep-smi " + "doesn't work out of the box,\nyou may want to " + "try out the default value by passing " + "smi_cmd=0x82 to the module\n ON YOUR OWN " + "RISK.\n"); + } + if ((r.ebx & 0xffff) != 0xb2) { + printf("non-default command port. If speedstep-smi " + "doesn't work out of the box,\nyou may want to " + "try out the default value by passing " + "smi_port=0x82 to the module\n ON YOUR OWN " + "RISK.\n"); + } + } else { + printf("BIOS DOES NOT support GSIC call. Dumping registers anyway:\n"); + printf("eax = 0x%.8x\n", r.eax); + printf("ebx = 0x%.8x\n", r.ebx); + printf("ecx = 0x%.8x\n", r.ecx); + printf("edx = 0x%.8x\n", r.edx); + printf("Note also that some BIOS do not support the initial " + "GSIC call, but the newer\nspeedstep-smi driver may " + "work.\nFor this, you need to pass some arguments to " + "the speedstep-smi driver:\n"); + printf("\tsmi_cmd=0x?? smi_port=0x?? smi_sig=1\n"); + printf("\nUnfortunately, you have to know what exactly are " + "smi_cmd and smi_port, and this\nis system " + "dependent.\n"); + } + return 1; +} diff --git a/tools/power/cpupower/debug/i386/powernow-k8-decode.c b/tools/power/cpupower/debug/i386/powernow-k8-decode.c new file mode 100644 index 000000000..735dca1e2 --- /dev/null +++ b/tools/power/cpupower/debug/i386/powernow-k8-decode.c @@ -0,0 +1,95 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * (C) 2004 Bruno Ducrot <ducrot@poupinou.org> + * + * Based on code found in + * linux/arch/i386/kernel/cpu/cpufreq/powernow-k8.c + * and originally developed by Paul Devriendt + */ + +#include <stdio.h> +#include <stdlib.h> +#include <stdint.h> +#include <unistd.h> +#include <errno.h> +#include <fcntl.h> + +#include <sys/types.h> +#include <sys/stat.h> + +#define MCPU 32 + +#define MSR_FIDVID_STATUS 0xc0010042 + +#define MSR_S_HI_CURRENT_VID 0x0000001f +#define MSR_S_LO_CURRENT_FID 0x0000003f + +static int get_fidvid(uint32_t cpu, uint32_t *fid, uint32_t *vid) +{ + int err = 1; + uint64_t msr = 0; + int fd; + char file[20]; + + if (cpu > MCPU) + goto out; + + sprintf(file, "/dev/cpu/%d/msr", cpu); + + fd = open(file, O_RDONLY); + if (fd < 0) + goto out; + lseek(fd, MSR_FIDVID_STATUS, SEEK_CUR); + if (read(fd, &msr, 8) != 8) + goto err1; + + *fid = ((uint32_t )(msr & 0xffffffffull)) & MSR_S_LO_CURRENT_FID; + *vid = ((uint32_t )(msr>>32 & 0xffffffffull)) & MSR_S_HI_CURRENT_VID; + err = 0; +err1: + close(fd); +out: + return err; +} + + +/* Return a frequency in MHz, given an input fid */ +static uint32_t find_freq_from_fid(uint32_t fid) +{ + return 800 + (fid * 100); +} + +/* Return a voltage in miliVolts, given an input vid */ +static uint32_t find_millivolts_from_vid(uint32_t vid) +{ + return 1550-vid*25; +} + +int main (int argc, char *argv[]) +{ + int err; + int cpu; + uint32_t fid, vid; + + if (argc < 2) + cpu = 0; + else + cpu = strtoul(argv[1], NULL, 0); + + err = get_fidvid(cpu, &fid, &vid); + + if (err) { + printf("can't get fid, vid from MSR\n"); + printf("Possible trouble: you don't run a powernow-k8 capable cpu\n"); + printf("or you are not root, or the msr driver is not present\n"); + exit(1); + } + + + printf("cpu %d currently at %d MHz and %d mV\n", + cpu, + find_freq_from_fid(fid), + find_millivolts_from_vid(vid)); + + return 0; +} diff --git a/tools/power/cpupower/debug/kernel/Makefile b/tools/power/cpupower/debug/kernel/Makefile new file mode 100644 index 000000000..7b5c43684 --- /dev/null +++ b/tools/power/cpupower/debug/kernel/Makefile @@ -0,0 +1,23 @@ +# SPDX-License-Identifier: GPL-2.0 +obj-m := + +KDIR := /lib/modules/$(shell uname -r)/build +KMISC := /lib/modules/$(shell uname -r)/cpufrequtils/ + +ifeq ("$(CONFIG_X86_TSC)", "y") + obj-m += cpufreq-test_tsc.o +endif + +default: + $(MAKE) -C $(KDIR) M=$(CURDIR) + +clean: + - rm -rf *.o *.ko .*.cmd .*.mod.* *.mod.c + - rm -rf Module.symvers modules.order + +install: default + install -d $(KMISC) + install -m 644 -c *.ko $(KMISC) + /sbin/depmod -a + +all: default diff --git a/tools/power/cpupower/debug/kernel/cpufreq-test_tsc.c b/tools/power/cpupower/debug/kernel/cpufreq-test_tsc.c new file mode 100644 index 000000000..e364b170b --- /dev/null +++ b/tools/power/cpupower/debug/kernel/cpufreq-test_tsc.c @@ -0,0 +1,111 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * test module to check whether the TSC-based delay routine continues + * to work properly after cpufreq transitions. Needs ACPI to work + * properly. + * + * Based partly on the Power Management Timer (PMTMR) code to be found + * in arch/i386/kernel/timers/timer_pm.c on recent 2.6. kernels, especially + * code written by John Stultz. The read_pmtmr function was copied verbatim + * from that file. + * + * (C) 2004 Dominik Brodowski + * + * To use: + * 1.) pass clock=tsc to the kernel on your bootloader + * 2.) modprobe this module (it'll fail) + * 3.) change CPU frequency + * 4.) modprobe this module again + * 5.) if the third value, "diff_pmtmr", changes between 2. and 4., the + * TSC-based delay routine on the Linux kernel does not correctly + * handle the cpufreq transition. Please report this to + * linux-pm@vger.kernel.org + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/acpi.h> +#include <asm/io.h> + +static int pm_tmr_ioport = 0; + +/*helper function to safely read acpi pm timesource*/ +static u32 read_pmtmr(void) +{ + u32 v1=0,v2=0,v3=0; + /* It has been reported that because of various broken + * chipsets (ICH4, PIIX4 and PIIX4E) where the ACPI PM time + * source is not latched, so you must read it multiple + * times to insure a safe value is read. + */ + do { + v1 = inl(pm_tmr_ioport); + v2 = inl(pm_tmr_ioport); + v3 = inl(pm_tmr_ioport); + } while ((v1 > v2 && v1 < v3) || (v2 > v3 && v2 < v1) + || (v3 > v1 && v3 < v2)); + + /* mask the output to 24 bits */ + return (v2 & 0xFFFFFF); +} + +static int __init cpufreq_test_tsc(void) +{ + u32 now, then, diff; + u64 now_tsc, then_tsc, diff_tsc; + int i; + + /* the following code snipped is copied from arch/x86/kernel/acpi/boot.c + of Linux v2.6.25. */ + + /* detect the location of the ACPI PM Timer */ + if (acpi_gbl_FADT.header.revision >= FADT2_REVISION_ID) { + /* FADT rev. 2 */ + if (acpi_gbl_FADT.xpm_timer_block.space_id != + ACPI_ADR_SPACE_SYSTEM_IO) + return 0; + + pm_tmr_ioport = acpi_gbl_FADT.xpm_timer_block.address; + /* + * "X" fields are optional extensions to the original V1.0 + * fields, so we must selectively expand V1.0 fields if the + * corresponding X field is zero. + */ + if (!pm_tmr_ioport) + pm_tmr_ioport = acpi_gbl_FADT.pm_timer_block; + } else { + /* FADT rev. 1 */ + pm_tmr_ioport = acpi_gbl_FADT.pm_timer_block; + } + + printk(KERN_DEBUG "start--> \n"); + then = read_pmtmr(); + then_tsc = rdtsc(); + for (i=0;i<20;i++) { + mdelay(100); + now = read_pmtmr(); + now_tsc = rdtsc(); + diff = (now - then) & 0xFFFFFF; + diff_tsc = now_tsc - then_tsc; + printk(KERN_DEBUG "t1: %08u t2: %08u diff_pmtmr: %08u diff_tsc: %016llu\n", then, now, diff, diff_tsc); + then = now; + then_tsc = now_tsc; + } + printk(KERN_DEBUG "<-- end \n"); + return -ENODEV; +} + +static void __exit cpufreq_none(void) +{ + return; +} + +module_init(cpufreq_test_tsc) +module_exit(cpufreq_none) + + +MODULE_AUTHOR("Dominik Brodowski"); +MODULE_DESCRIPTION("Verify the TSC cpufreq notifier working correctly -- needs ACPI-enabled system"); +MODULE_LICENSE ("GPL"); diff --git a/tools/power/cpupower/debug/x86_64/Makefile b/tools/power/cpupower/debug/x86_64/Makefile new file mode 100644 index 000000000..b1b6c4364 --- /dev/null +++ b/tools/power/cpupower/debug/x86_64/Makefile @@ -0,0 +1,31 @@ +# SPDX-License-Identifier: GPL-2.0 +OUTPUT=./ +ifeq ("$(origin O)", "command line") + OUTPUT := $(O)/ +endif + +DESTDIR = +bindir = /usr/bin + +INSTALL = /usr/bin/install + + +default: all + +$(OUTPUT)centrino-decode: ../i386/centrino-decode.c + $(CC) $(CFLAGS) -o $@ $(LDFLAGS) $< + +$(OUTPUT)powernow-k8-decode: ../i386/powernow-k8-decode.c + $(CC) $(CFLAGS) -o $@ $(LDFLAGS) $< + +all: $(OUTPUT)centrino-decode $(OUTPUT)powernow-k8-decode + +clean: + rm -rf $(OUTPUT)centrino-decode $(OUTPUT)powernow-k8-decode + +install: + $(INSTALL) -d $(DESTDIR)${bindir} + $(INSTALL) $(OUTPUT)centrino-decode $(DESTDIR)${bindir} + $(INSTALL) $(OUTPUT)powernow-k8-decode $(DESTDIR)${bindir} + +.PHONY: all default clean install diff --git a/tools/power/cpupower/lib/cpufreq.c b/tools/power/cpupower/lib/cpufreq.c new file mode 100644 index 000000000..c3b56db8b --- /dev/null +++ b/tools/power/cpupower/lib/cpufreq.c @@ -0,0 +1,776 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * (C) 2004-2009 Dominik Brodowski <linux@dominikbrodowski.de> + */ + + +#include <stdio.h> +#include <errno.h> +#include <stdlib.h> +#include <string.h> +#include <sys/types.h> +#include <sys/stat.h> +#include <fcntl.h> +#include <unistd.h> + +#include "cpufreq.h" +#include "cpupower_intern.h" + +/* CPUFREQ sysfs access **************************************************/ + +/* helper function to read file from /sys into given buffer */ +/* fname is a relative path under "cpuX/cpufreq" dir */ +static unsigned int sysfs_cpufreq_read_file(unsigned int cpu, const char *fname, + char *buf, size_t buflen) +{ + char path[SYSFS_PATH_MAX]; + + snprintf(path, sizeof(path), PATH_TO_CPU "cpu%u/cpufreq/%s", + cpu, fname); + return cpupower_read_sysfs(path, buf, buflen); +} + +/* helper function to write a new value to a /sys file */ +/* fname is a relative path under "cpuX/cpufreq" dir */ +static unsigned int sysfs_cpufreq_write_file(unsigned int cpu, + const char *fname, + const char *value, size_t len) +{ + char path[SYSFS_PATH_MAX]; + int fd; + ssize_t numwrite; + + snprintf(path, sizeof(path), PATH_TO_CPU "cpu%u/cpufreq/%s", + cpu, fname); + + fd = open(path, O_WRONLY); + if (fd == -1) + return 0; + + numwrite = write(fd, value, len); + if (numwrite < 1) { + close(fd); + return 0; + } + + close(fd); + + return (unsigned int) numwrite; +} + +/* read access to files which contain one numeric value */ + +enum cpufreq_value { + CPUINFO_CUR_FREQ, + CPUINFO_MIN_FREQ, + CPUINFO_MAX_FREQ, + CPUINFO_LATENCY, + SCALING_CUR_FREQ, + SCALING_MIN_FREQ, + SCALING_MAX_FREQ, + STATS_NUM_TRANSITIONS, + MAX_CPUFREQ_VALUE_READ_FILES +}; + +static const char *cpufreq_value_files[MAX_CPUFREQ_VALUE_READ_FILES] = { + [CPUINFO_CUR_FREQ] = "cpuinfo_cur_freq", + [CPUINFO_MIN_FREQ] = "cpuinfo_min_freq", + [CPUINFO_MAX_FREQ] = "cpuinfo_max_freq", + [CPUINFO_LATENCY] = "cpuinfo_transition_latency", + [SCALING_CUR_FREQ] = "scaling_cur_freq", + [SCALING_MIN_FREQ] = "scaling_min_freq", + [SCALING_MAX_FREQ] = "scaling_max_freq", + [STATS_NUM_TRANSITIONS] = "stats/total_trans" +}; + + +static unsigned long sysfs_cpufreq_get_one_value(unsigned int cpu, + enum cpufreq_value which) +{ + unsigned long value; + unsigned int len; + char linebuf[MAX_LINE_LEN]; + char *endp; + + if (which >= MAX_CPUFREQ_VALUE_READ_FILES) + return 0; + + len = sysfs_cpufreq_read_file(cpu, cpufreq_value_files[which], + linebuf, sizeof(linebuf)); + + if (len == 0) + return 0; + + value = strtoul(linebuf, &endp, 0); + + if (endp == linebuf || errno == ERANGE) + return 0; + + return value; +} + +/* read access to files which contain one string */ + +enum cpufreq_string { + SCALING_DRIVER, + SCALING_GOVERNOR, + MAX_CPUFREQ_STRING_FILES +}; + +static const char *cpufreq_string_files[MAX_CPUFREQ_STRING_FILES] = { + [SCALING_DRIVER] = "scaling_driver", + [SCALING_GOVERNOR] = "scaling_governor", +}; + + +static char *sysfs_cpufreq_get_one_string(unsigned int cpu, + enum cpufreq_string which) +{ + char linebuf[MAX_LINE_LEN]; + char *result; + unsigned int len; + + if (which >= MAX_CPUFREQ_STRING_FILES) + return NULL; + + len = sysfs_cpufreq_read_file(cpu, cpufreq_string_files[which], + linebuf, sizeof(linebuf)); + if (len == 0) + return NULL; + + result = strdup(linebuf); + if (result == NULL) + return NULL; + + if (result[strlen(result) - 1] == '\n') + result[strlen(result) - 1] = '\0'; + + return result; +} + +/* write access */ + +enum cpufreq_write { + WRITE_SCALING_MIN_FREQ, + WRITE_SCALING_MAX_FREQ, + WRITE_SCALING_GOVERNOR, + WRITE_SCALING_SET_SPEED, + MAX_CPUFREQ_WRITE_FILES +}; + +static const char *cpufreq_write_files[MAX_CPUFREQ_WRITE_FILES] = { + [WRITE_SCALING_MIN_FREQ] = "scaling_min_freq", + [WRITE_SCALING_MAX_FREQ] = "scaling_max_freq", + [WRITE_SCALING_GOVERNOR] = "scaling_governor", + [WRITE_SCALING_SET_SPEED] = "scaling_setspeed", +}; + +static int sysfs_cpufreq_write_one_value(unsigned int cpu, + enum cpufreq_write which, + const char *new_value, size_t len) +{ + if (which >= MAX_CPUFREQ_WRITE_FILES) + return 0; + + if (sysfs_cpufreq_write_file(cpu, cpufreq_write_files[which], + new_value, len) != len) + return -ENODEV; + + return 0; +}; + +unsigned long cpufreq_get_freq_kernel(unsigned int cpu) +{ + return sysfs_cpufreq_get_one_value(cpu, SCALING_CUR_FREQ); +} + +unsigned long cpufreq_get_freq_hardware(unsigned int cpu) +{ + return sysfs_cpufreq_get_one_value(cpu, CPUINFO_CUR_FREQ); +} + +unsigned long cpufreq_get_transition_latency(unsigned int cpu) +{ + return sysfs_cpufreq_get_one_value(cpu, CPUINFO_LATENCY); +} + +int cpufreq_get_hardware_limits(unsigned int cpu, + unsigned long *min, + unsigned long *max) +{ + if ((!min) || (!max)) + return -EINVAL; + + *min = sysfs_cpufreq_get_one_value(cpu, CPUINFO_MIN_FREQ); + if (!*min) + return -ENODEV; + + *max = sysfs_cpufreq_get_one_value(cpu, CPUINFO_MAX_FREQ); + if (!*max) + return -ENODEV; + + return 0; +} + +char *cpufreq_get_driver(unsigned int cpu) +{ + return sysfs_cpufreq_get_one_string(cpu, SCALING_DRIVER); +} + +void cpufreq_put_driver(char *ptr) +{ + if (!ptr) + return; + free(ptr); +} + +struct cpufreq_policy *cpufreq_get_policy(unsigned int cpu) +{ + struct cpufreq_policy *policy; + + policy = malloc(sizeof(struct cpufreq_policy)); + if (!policy) + return NULL; + + policy->governor = sysfs_cpufreq_get_one_string(cpu, SCALING_GOVERNOR); + if (!policy->governor) { + free(policy); + return NULL; + } + policy->min = sysfs_cpufreq_get_one_value(cpu, SCALING_MIN_FREQ); + policy->max = sysfs_cpufreq_get_one_value(cpu, SCALING_MAX_FREQ); + if ((!policy->min) || (!policy->max)) { + free(policy->governor); + free(policy); + return NULL; + } + + return policy; +} + +void cpufreq_put_policy(struct cpufreq_policy *policy) +{ + if ((!policy) || (!policy->governor)) + return; + + free(policy->governor); + policy->governor = NULL; + free(policy); +} + +struct cpufreq_available_governors *cpufreq_get_available_governors(unsigned + int cpu) +{ + struct cpufreq_available_governors *first = NULL; + struct cpufreq_available_governors *current = NULL; + char linebuf[MAX_LINE_LEN]; + unsigned int pos, i; + unsigned int len; + + len = sysfs_cpufreq_read_file(cpu, "scaling_available_governors", + linebuf, sizeof(linebuf)); + if (len == 0) + return NULL; + + pos = 0; + for (i = 0; i < len; i++) { + if (linebuf[i] == ' ' || linebuf[i] == '\n') { + if (i - pos < 2) + continue; + if (current) { + current->next = malloc(sizeof(*current)); + if (!current->next) + goto error_out; + current = current->next; + } else { + first = malloc(sizeof(*first)); + if (!first) + return NULL; + current = first; + } + current->first = first; + current->next = NULL; + + current->governor = malloc(i - pos + 1); + if (!current->governor) + goto error_out; + + memcpy(current->governor, linebuf + pos, i - pos); + current->governor[i - pos] = '\0'; + pos = i + 1; + } + } + + return first; + + error_out: + while (first) { + current = first->next; + if (first->governor) + free(first->governor); + free(first); + first = current; + } + return NULL; +} + +void cpufreq_put_available_governors(struct cpufreq_available_governors *any) +{ + struct cpufreq_available_governors *tmp, *next; + + if (!any) + return; + + tmp = any->first; + while (tmp) { + next = tmp->next; + if (tmp->governor) + free(tmp->governor); + free(tmp); + tmp = next; + } +} + + +struct cpufreq_available_frequencies +*cpufreq_get_available_frequencies(unsigned int cpu) +{ + struct cpufreq_available_frequencies *first = NULL; + struct cpufreq_available_frequencies *current = NULL; + char one_value[SYSFS_PATH_MAX]; + char linebuf[MAX_LINE_LEN]; + unsigned int pos, i; + unsigned int len; + + len = sysfs_cpufreq_read_file(cpu, "scaling_available_frequencies", + linebuf, sizeof(linebuf)); + if (len == 0) + return NULL; + + pos = 0; + for (i = 0; i < len; i++) { + if (linebuf[i] == ' ' || linebuf[i] == '\n') { + if (i - pos < 2) + continue; + if (i - pos >= SYSFS_PATH_MAX) + goto error_out; + if (current) { + current->next = malloc(sizeof(*current)); + if (!current->next) + goto error_out; + current = current->next; + } else { + first = malloc(sizeof(*first)); + if (!first) + return NULL; + current = first; + } + current->first = first; + current->next = NULL; + + memcpy(one_value, linebuf + pos, i - pos); + one_value[i - pos] = '\0'; + if (sscanf(one_value, "%lu", ¤t->frequency) != 1) + goto error_out; + + pos = i + 1; + } + } + + return first; + + error_out: + while (first) { + current = first->next; + free(first); + first = current; + } + return NULL; +} + +struct cpufreq_available_frequencies +*cpufreq_get_boost_frequencies(unsigned int cpu) +{ + struct cpufreq_available_frequencies *first = NULL; + struct cpufreq_available_frequencies *current = NULL; + char one_value[SYSFS_PATH_MAX]; + char linebuf[MAX_LINE_LEN]; + unsigned int pos, i; + unsigned int len; + + len = sysfs_cpufreq_read_file(cpu, "scaling_boost_frequencies", + linebuf, sizeof(linebuf)); + if (len == 0) + return NULL; + + pos = 0; + for (i = 0; i < len; i++) { + if (linebuf[i] == ' ' || linebuf[i] == '\n') { + if (i - pos < 2) + continue; + if (i - pos >= SYSFS_PATH_MAX) + goto error_out; + if (current) { + current->next = malloc(sizeof(*current)); + if (!current->next) + goto error_out; + current = current->next; + } else { + first = malloc(sizeof(*first)); + if (!first) + return NULL; + current = first; + } + current->first = first; + current->next = NULL; + + memcpy(one_value, linebuf + pos, i - pos); + one_value[i - pos] = '\0'; + if (sscanf(one_value, "%lu", ¤t->frequency) != 1) + goto error_out; + + pos = i + 1; + } + } + + return first; + + error_out: + while (first) { + current = first->next; + free(first); + first = current; + } + return NULL; +} + +void cpufreq_put_available_frequencies(struct cpufreq_available_frequencies *any) +{ + struct cpufreq_available_frequencies *tmp, *next; + + if (!any) + return; + + tmp = any->first; + while (tmp) { + next = tmp->next; + free(tmp); + tmp = next; + } +} + +void cpufreq_put_boost_frequencies(struct cpufreq_available_frequencies *any) +{ + cpufreq_put_available_frequencies(any); +} + +static struct cpufreq_affected_cpus *sysfs_get_cpu_list(unsigned int cpu, + const char *file) +{ + struct cpufreq_affected_cpus *first = NULL; + struct cpufreq_affected_cpus *current = NULL; + char one_value[SYSFS_PATH_MAX]; + char linebuf[MAX_LINE_LEN]; + unsigned int pos, i; + unsigned int len; + + len = sysfs_cpufreq_read_file(cpu, file, linebuf, sizeof(linebuf)); + if (len == 0) + return NULL; + + pos = 0; + for (i = 0; i < len; i++) { + if (i == len || linebuf[i] == ' ' || linebuf[i] == '\n') { + if (i - pos < 1) + continue; + if (i - pos >= SYSFS_PATH_MAX) + goto error_out; + if (current) { + current->next = malloc(sizeof(*current)); + if (!current->next) + goto error_out; + current = current->next; + } else { + first = malloc(sizeof(*first)); + if (!first) + return NULL; + current = first; + } + current->first = first; + current->next = NULL; + + memcpy(one_value, linebuf + pos, i - pos); + one_value[i - pos] = '\0'; + + if (sscanf(one_value, "%u", ¤t->cpu) != 1) + goto error_out; + + pos = i + 1; + } + } + + return first; + + error_out: + while (first) { + current = first->next; + free(first); + first = current; + } + return NULL; +} + +struct cpufreq_affected_cpus *cpufreq_get_affected_cpus(unsigned int cpu) +{ + return sysfs_get_cpu_list(cpu, "affected_cpus"); +} + +void cpufreq_put_affected_cpus(struct cpufreq_affected_cpus *any) +{ + struct cpufreq_affected_cpus *tmp, *next; + + if (!any) + return; + + tmp = any->first; + while (tmp) { + next = tmp->next; + free(tmp); + tmp = next; + } +} + + +struct cpufreq_affected_cpus *cpufreq_get_related_cpus(unsigned int cpu) +{ + return sysfs_get_cpu_list(cpu, "related_cpus"); +} + +void cpufreq_put_related_cpus(struct cpufreq_affected_cpus *any) +{ + cpufreq_put_affected_cpus(any); +} + +static int verify_gov(char *new_gov, char *passed_gov) +{ + unsigned int i, j = 0; + + if (!passed_gov || (strlen(passed_gov) > 19)) + return -EINVAL; + + strncpy(new_gov, passed_gov, 20); + for (i = 0; i < 20; i++) { + if (j) { + new_gov[i] = '\0'; + continue; + } + if ((new_gov[i] >= 'a') && (new_gov[i] <= 'z')) + continue; + + if ((new_gov[i] >= 'A') && (new_gov[i] <= 'Z')) + continue; + + if (new_gov[i] == '-') + continue; + + if (new_gov[i] == '_') + continue; + + if (new_gov[i] == '\0') { + j = 1; + continue; + } + return -EINVAL; + } + new_gov[19] = '\0'; + return 0; +} + +int cpufreq_set_policy(unsigned int cpu, struct cpufreq_policy *policy) +{ + char min[SYSFS_PATH_MAX]; + char max[SYSFS_PATH_MAX]; + char gov[SYSFS_PATH_MAX]; + int ret; + unsigned long old_min; + int write_max_first; + + if (!policy || !(policy->governor)) + return -EINVAL; + + if (policy->max < policy->min) + return -EINVAL; + + if (verify_gov(gov, policy->governor)) + return -EINVAL; + + snprintf(min, SYSFS_PATH_MAX, "%lu", policy->min); + snprintf(max, SYSFS_PATH_MAX, "%lu", policy->max); + + old_min = sysfs_cpufreq_get_one_value(cpu, SCALING_MIN_FREQ); + write_max_first = (old_min && (policy->max < old_min) ? 0 : 1); + + if (write_max_first) { + ret = sysfs_cpufreq_write_one_value(cpu, WRITE_SCALING_MAX_FREQ, + max, strlen(max)); + if (ret) + return ret; + } + + ret = sysfs_cpufreq_write_one_value(cpu, WRITE_SCALING_MIN_FREQ, min, + strlen(min)); + if (ret) + return ret; + + if (!write_max_first) { + ret = sysfs_cpufreq_write_one_value(cpu, WRITE_SCALING_MAX_FREQ, + max, strlen(max)); + if (ret) + return ret; + } + + return sysfs_cpufreq_write_one_value(cpu, WRITE_SCALING_GOVERNOR, + gov, strlen(gov)); +} + + +int cpufreq_modify_policy_min(unsigned int cpu, unsigned long min_freq) +{ + char value[SYSFS_PATH_MAX]; + + snprintf(value, SYSFS_PATH_MAX, "%lu", min_freq); + + return sysfs_cpufreq_write_one_value(cpu, WRITE_SCALING_MIN_FREQ, + value, strlen(value)); +} + + +int cpufreq_modify_policy_max(unsigned int cpu, unsigned long max_freq) +{ + char value[SYSFS_PATH_MAX]; + + snprintf(value, SYSFS_PATH_MAX, "%lu", max_freq); + + return sysfs_cpufreq_write_one_value(cpu, WRITE_SCALING_MAX_FREQ, + value, strlen(value)); +} + +int cpufreq_modify_policy_governor(unsigned int cpu, char *governor) +{ + char new_gov[SYSFS_PATH_MAX]; + + if ((!governor) || (strlen(governor) > 19)) + return -EINVAL; + + if (verify_gov(new_gov, governor)) + return -EINVAL; + + return sysfs_cpufreq_write_one_value(cpu, WRITE_SCALING_GOVERNOR, + new_gov, strlen(new_gov)); +} + +int cpufreq_set_frequency(unsigned int cpu, unsigned long target_frequency) +{ + struct cpufreq_policy *pol = cpufreq_get_policy(cpu); + char userspace_gov[] = "userspace"; + char freq[SYSFS_PATH_MAX]; + int ret; + + if (!pol) + return -ENODEV; + + if (strncmp(pol->governor, userspace_gov, 9) != 0) { + ret = cpufreq_modify_policy_governor(cpu, userspace_gov); + if (ret) { + cpufreq_put_policy(pol); + return ret; + } + } + + cpufreq_put_policy(pol); + + snprintf(freq, SYSFS_PATH_MAX, "%lu", target_frequency); + + return sysfs_cpufreq_write_one_value(cpu, WRITE_SCALING_SET_SPEED, + freq, strlen(freq)); +} + +struct cpufreq_stats *cpufreq_get_stats(unsigned int cpu, + unsigned long long *total_time) +{ + struct cpufreq_stats *first = NULL; + struct cpufreq_stats *current = NULL; + char one_value[SYSFS_PATH_MAX]; + char linebuf[MAX_LINE_LEN]; + unsigned int pos, i; + unsigned int len; + + len = sysfs_cpufreq_read_file(cpu, "stats/time_in_state", + linebuf, sizeof(linebuf)); + if (len == 0) + return NULL; + + *total_time = 0; + pos = 0; + for (i = 0; i < len; i++) { + if (i == strlen(linebuf) || linebuf[i] == '\n') { + if (i - pos < 2) + continue; + if ((i - pos) >= SYSFS_PATH_MAX) + goto error_out; + if (current) { + current->next = malloc(sizeof(*current)); + if (!current->next) + goto error_out; + current = current->next; + } else { + first = malloc(sizeof(*first)); + if (!first) + return NULL; + current = first; + } + current->first = first; + current->next = NULL; + + memcpy(one_value, linebuf + pos, i - pos); + one_value[i - pos] = '\0'; + if (sscanf(one_value, "%lu %llu", + ¤t->frequency, + ¤t->time_in_state) != 2) + goto error_out; + + *total_time = *total_time + current->time_in_state; + pos = i + 1; + } + } + + return first; + + error_out: + while (first) { + current = first->next; + free(first); + first = current; + } + return NULL; +} + +void cpufreq_put_stats(struct cpufreq_stats *any) +{ + struct cpufreq_stats *tmp, *next; + + if (!any) + return; + + tmp = any->first; + while (tmp) { + next = tmp->next; + free(tmp); + tmp = next; + } +} + +unsigned long cpufreq_get_transitions(unsigned int cpu) +{ + return sysfs_cpufreq_get_one_value(cpu, STATS_NUM_TRANSITIONS); +} diff --git a/tools/power/cpupower/lib/cpufreq.h b/tools/power/cpupower/lib/cpufreq.h new file mode 100644 index 000000000..95f4fd9e2 --- /dev/null +++ b/tools/power/cpupower/lib/cpufreq.h @@ -0,0 +1,210 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * cpufreq.h - definitions for libcpufreq + * + * Copyright (C) 2004-2009 Dominik Brodowski <linux@dominikbrodowski.de> + */ + +#ifndef __CPUPOWER_CPUFREQ_H__ +#define __CPUPOWER_CPUFREQ_H__ + +struct cpufreq_policy { + unsigned long min; + unsigned long max; + char *governor; +}; + +struct cpufreq_available_governors { + char *governor; + struct cpufreq_available_governors *next; + struct cpufreq_available_governors *first; +}; + +struct cpufreq_available_frequencies { + unsigned long frequency; + struct cpufreq_available_frequencies *next; + struct cpufreq_available_frequencies *first; +}; + + +struct cpufreq_affected_cpus { + unsigned int cpu; + struct cpufreq_affected_cpus *next; + struct cpufreq_affected_cpus *first; +}; + +struct cpufreq_stats { + unsigned long frequency; + unsigned long long time_in_state; + struct cpufreq_stats *next; + struct cpufreq_stats *first; +}; + + + +#ifdef __cplusplus +extern "C" { +#endif + +/* determine current CPU frequency + * - _kernel variant means kernel's opinion of CPU frequency + * - _hardware variant means actual hardware CPU frequency, + * which is only available to root. + * + * returns 0 on failure, else frequency in kHz. + */ + +unsigned long cpufreq_get_freq_kernel(unsigned int cpu); + +unsigned long cpufreq_get_freq_hardware(unsigned int cpu); + +#define cpufreq_get(cpu) cpufreq_get_freq_kernel(cpu); + + +/* determine CPU transition latency + * + * returns 0 on failure, else transition latency in 10^(-9) s = nanoseconds + */ +unsigned long cpufreq_get_transition_latency(unsigned int cpu); + + +/* determine hardware CPU frequency limits + * + * These may be limited further by thermal, energy or other + * considerations by cpufreq policy notifiers in the kernel. + */ + +int cpufreq_get_hardware_limits(unsigned int cpu, + unsigned long *min, + unsigned long *max); + + +/* determine CPUfreq driver used + * + * Remember to call cpufreq_put_driver when no longer needed + * to avoid memory leakage, please. + */ + +char *cpufreq_get_driver(unsigned int cpu); + +void cpufreq_put_driver(char *ptr); + + +/* determine CPUfreq policy currently used + * + * Remember to call cpufreq_put_policy when no longer needed + * to avoid memory leakage, please. + */ + + +struct cpufreq_policy *cpufreq_get_policy(unsigned int cpu); + +void cpufreq_put_policy(struct cpufreq_policy *policy); + + +/* determine CPUfreq governors currently available + * + * may be modified by modprobe'ing or rmmod'ing other governors. Please + * free allocated memory by calling cpufreq_put_available_governors + * after use. + */ + + +struct cpufreq_available_governors +*cpufreq_get_available_governors(unsigned int cpu); + +void cpufreq_put_available_governors( + struct cpufreq_available_governors *first); + + +/* determine CPU frequency states available + * + * Only present on _some_ ->target() cpufreq drivers. For information purposes + * only. Please free allocated memory by calling + * cpufreq_put_frequencies after use. + */ + +struct cpufreq_available_frequencies +*cpufreq_get_available_frequencies(unsigned int cpu); + +void cpufreq_put_available_frequencies( + struct cpufreq_available_frequencies *first); + +struct cpufreq_available_frequencies +*cpufreq_get_boost_frequencies(unsigned int cpu); + +void cpufreq_put_boost_frequencies( + struct cpufreq_available_frequencies *first); + + +/* determine affected CPUs + * + * Remember to call cpufreq_put_affected_cpus when no longer needed + * to avoid memory leakage, please. + */ + +struct cpufreq_affected_cpus *cpufreq_get_affected_cpus(unsigned + int cpu); + +void cpufreq_put_affected_cpus(struct cpufreq_affected_cpus *first); + + +/* determine related CPUs + * + * Remember to call cpufreq_put_related_cpus when no longer needed + * to avoid memory leakage, please. + */ + +struct cpufreq_affected_cpus *cpufreq_get_related_cpus(unsigned + int cpu); + +void cpufreq_put_related_cpus(struct cpufreq_affected_cpus *first); + + +/* determine stats for cpufreq subsystem + * + * This is not available in all kernel versions or configurations. + */ + +struct cpufreq_stats *cpufreq_get_stats(unsigned int cpu, + unsigned long long *total_time); + +void cpufreq_put_stats(struct cpufreq_stats *stats); + +unsigned long cpufreq_get_transitions(unsigned int cpu); + + +/* set new cpufreq policy + * + * Tries to set the passed policy as new policy as close as possible, + * but results may differ depending e.g. on governors being available. + */ + +int cpufreq_set_policy(unsigned int cpu, struct cpufreq_policy *policy); + + +/* modify a policy by only changing min/max freq or governor + * + * Does not check whether result is what was intended. + */ + +int cpufreq_modify_policy_min(unsigned int cpu, unsigned long min_freq); +int cpufreq_modify_policy_max(unsigned int cpu, unsigned long max_freq); +int cpufreq_modify_policy_governor(unsigned int cpu, char *governor); + + +/* set a specific frequency + * + * Does only work if userspace governor can be used and no external + * interference (other calls to this function or to set/modify_policy) + * occurs. Also does not work on ->range() cpufreq drivers. + */ + +int cpufreq_set_frequency(unsigned int cpu, + unsigned long target_frequency); + +#ifdef __cplusplus +} +#endif + +#endif /* _CPUFREQ_H */ diff --git a/tools/power/cpupower/lib/cpuidle.c b/tools/power/cpupower/lib/cpuidle.c new file mode 100644 index 000000000..479c5971a --- /dev/null +++ b/tools/power/cpupower/lib/cpuidle.c @@ -0,0 +1,379 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * (C) 2004-2009 Dominik Brodowski <linux@dominikbrodowski.de> + * (C) 2011 Thomas Renninger <trenn@novell.com> Novell Inc. + */ + +#include <stdio.h> +#include <errno.h> +#include <stdlib.h> +#include <string.h> +#include <sys/types.h> +#include <sys/stat.h> +#include <fcntl.h> +#include <unistd.h> + +#include "cpuidle.h" +#include "cpupower_intern.h" + +/* + * helper function to check whether a file under "../cpuX/cpuidle/stateX/" dir + * exists. + * For example the functionality to disable c-states was introduced in later + * kernel versions, this function can be used to explicitly check for this + * feature. + * + * returns 1 if the file exists, 0 otherwise. + */ +static +unsigned int cpuidle_state_file_exists(unsigned int cpu, + unsigned int idlestate, + const char *fname) +{ + char path[SYSFS_PATH_MAX]; + struct stat statbuf; + + + snprintf(path, sizeof(path), PATH_TO_CPU "cpu%u/cpuidle/state%u/%s", + cpu, idlestate, fname); + if (stat(path, &statbuf) != 0) + return 0; + return 1; +} + +/* + * helper function to read file from /sys into given buffer + * fname is a relative path under "cpuX/cpuidle/stateX/" dir + * cstates starting with 0, C0 is not counted as cstate. + * This means if you want C1 info, pass 0 as idlestate param + */ +static +unsigned int cpuidle_state_read_file(unsigned int cpu, + unsigned int idlestate, + const char *fname, char *buf, + size_t buflen) +{ + char path[SYSFS_PATH_MAX]; + int fd; + ssize_t numread; + + snprintf(path, sizeof(path), PATH_TO_CPU "cpu%u/cpuidle/state%u/%s", + cpu, idlestate, fname); + + fd = open(path, O_RDONLY); + if (fd == -1) + return 0; + + numread = read(fd, buf, buflen - 1); + if (numread < 1) { + close(fd); + return 0; + } + + buf[numread] = '\0'; + close(fd); + + return (unsigned int) numread; +} + +/* + * helper function to write a new value to a /sys file + * fname is a relative path under "../cpuX/cpuidle/cstateY/" dir + * + * Returns the number of bytes written or 0 on error + */ +static +unsigned int cpuidle_state_write_file(unsigned int cpu, + unsigned int idlestate, + const char *fname, + const char *value, size_t len) +{ + char path[SYSFS_PATH_MAX]; + int fd; + ssize_t numwrite; + + snprintf(path, sizeof(path), PATH_TO_CPU "cpu%u/cpuidle/state%u/%s", + cpu, idlestate, fname); + + fd = open(path, O_WRONLY); + if (fd == -1) + return 0; + + numwrite = write(fd, value, len); + if (numwrite < 1) { + close(fd); + return 0; + } + + close(fd); + + return (unsigned int) numwrite; +} + +/* read access to files which contain one numeric value */ + +enum idlestate_value { + IDLESTATE_USAGE, + IDLESTATE_POWER, + IDLESTATE_LATENCY, + IDLESTATE_TIME, + IDLESTATE_DISABLE, + MAX_IDLESTATE_VALUE_FILES +}; + +static const char *idlestate_value_files[MAX_IDLESTATE_VALUE_FILES] = { + [IDLESTATE_USAGE] = "usage", + [IDLESTATE_POWER] = "power", + [IDLESTATE_LATENCY] = "latency", + [IDLESTATE_TIME] = "time", + [IDLESTATE_DISABLE] = "disable", +}; + +static +unsigned long long cpuidle_state_get_one_value(unsigned int cpu, + unsigned int idlestate, + enum idlestate_value which) +{ + unsigned long long value; + unsigned int len; + char linebuf[MAX_LINE_LEN]; + char *endp; + + if (which >= MAX_IDLESTATE_VALUE_FILES) + return 0; + + len = cpuidle_state_read_file(cpu, idlestate, + idlestate_value_files[which], + linebuf, sizeof(linebuf)); + if (len == 0) + return 0; + + value = strtoull(linebuf, &endp, 0); + + if (endp == linebuf || errno == ERANGE) + return 0; + + return value; +} + +/* read access to files which contain one string */ + +enum idlestate_string { + IDLESTATE_DESC, + IDLESTATE_NAME, + MAX_IDLESTATE_STRING_FILES +}; + +static const char *idlestate_string_files[MAX_IDLESTATE_STRING_FILES] = { + [IDLESTATE_DESC] = "desc", + [IDLESTATE_NAME] = "name", +}; + + +static char *cpuidle_state_get_one_string(unsigned int cpu, + unsigned int idlestate, + enum idlestate_string which) +{ + char linebuf[MAX_LINE_LEN]; + char *result; + unsigned int len; + + if (which >= MAX_IDLESTATE_STRING_FILES) + return NULL; + + len = cpuidle_state_read_file(cpu, idlestate, + idlestate_string_files[which], + linebuf, sizeof(linebuf)); + if (len == 0) + return NULL; + + result = strdup(linebuf); + if (result == NULL) + return NULL; + + if (result[strlen(result) - 1] == '\n') + result[strlen(result) - 1] = '\0'; + + return result; +} + +/* + * Returns: + * 1 if disabled + * 0 if enabled + * -1 if idlestate is not available + * -2 if disabling is not supported by the kernel + */ +int cpuidle_is_state_disabled(unsigned int cpu, + unsigned int idlestate) +{ + if (cpuidle_state_count(cpu) <= idlestate) + return -1; + + if (!cpuidle_state_file_exists(cpu, idlestate, + idlestate_value_files[IDLESTATE_DISABLE])) + return -2; + return cpuidle_state_get_one_value(cpu, idlestate, IDLESTATE_DISABLE); +} + +/* + * Pass 1 as last argument to disable or 0 to enable the state + * Returns: + * 0 on success + * negative values on error, for example: + * -1 if idlestate is not available + * -2 if disabling is not supported by the kernel + * -3 No write access to disable/enable C-states + */ +int cpuidle_state_disable(unsigned int cpu, + unsigned int idlestate, + unsigned int disable) +{ + char value[SYSFS_PATH_MAX]; + int bytes_written; + + if (cpuidle_state_count(cpu) <= idlestate) + return -1; + + if (!cpuidle_state_file_exists(cpu, idlestate, + idlestate_value_files[IDLESTATE_DISABLE])) + return -2; + + snprintf(value, SYSFS_PATH_MAX, "%u", disable); + + bytes_written = cpuidle_state_write_file(cpu, idlestate, "disable", + value, sizeof(disable)); + if (bytes_written) + return 0; + return -3; +} + +unsigned long cpuidle_state_latency(unsigned int cpu, + unsigned int idlestate) +{ + return cpuidle_state_get_one_value(cpu, idlestate, IDLESTATE_LATENCY); +} + +unsigned long cpuidle_state_usage(unsigned int cpu, + unsigned int idlestate) +{ + return cpuidle_state_get_one_value(cpu, idlestate, IDLESTATE_USAGE); +} + +unsigned long long cpuidle_state_time(unsigned int cpu, + unsigned int idlestate) +{ + return cpuidle_state_get_one_value(cpu, idlestate, IDLESTATE_TIME); +} + +char *cpuidle_state_name(unsigned int cpu, unsigned int idlestate) +{ + return cpuidle_state_get_one_string(cpu, idlestate, IDLESTATE_NAME); +} + +char *cpuidle_state_desc(unsigned int cpu, unsigned int idlestate) +{ + return cpuidle_state_get_one_string(cpu, idlestate, IDLESTATE_DESC); +} + +/* + * Returns number of supported C-states of CPU core cpu + * Negativ in error case + * Zero if cpuidle does not export any C-states + */ +unsigned int cpuidle_state_count(unsigned int cpu) +{ + char file[SYSFS_PATH_MAX]; + struct stat statbuf; + int idlestates = 1; + + + snprintf(file, SYSFS_PATH_MAX, PATH_TO_CPU "cpuidle"); + if (stat(file, &statbuf) != 0 || !S_ISDIR(statbuf.st_mode)) + return 0; + + snprintf(file, SYSFS_PATH_MAX, PATH_TO_CPU "cpu%u/cpuidle/state0", cpu); + if (stat(file, &statbuf) != 0 || !S_ISDIR(statbuf.st_mode)) + return 0; + + while (stat(file, &statbuf) == 0 && S_ISDIR(statbuf.st_mode)) { + snprintf(file, SYSFS_PATH_MAX, PATH_TO_CPU + "cpu%u/cpuidle/state%d", cpu, idlestates); + idlestates++; + } + idlestates--; + return idlestates; +} + +/* CPUidle general /sys/devices/system/cpu/cpuidle/ sysfs access ********/ + +/* + * helper function to read file from /sys into given buffer + * fname is a relative path under "cpu/cpuidle/" dir + */ +static unsigned int sysfs_cpuidle_read_file(const char *fname, char *buf, + size_t buflen) +{ + char path[SYSFS_PATH_MAX]; + + snprintf(path, sizeof(path), PATH_TO_CPU "cpuidle/%s", fname); + + return cpupower_read_sysfs(path, buf, buflen); +} + + + +/* read access to files which contain one string */ + +enum cpuidle_string { + CPUIDLE_GOVERNOR, + CPUIDLE_GOVERNOR_RO, + CPUIDLE_DRIVER, + MAX_CPUIDLE_STRING_FILES +}; + +static const char *cpuidle_string_files[MAX_CPUIDLE_STRING_FILES] = { + [CPUIDLE_GOVERNOR] = "current_governor", + [CPUIDLE_GOVERNOR_RO] = "current_governor_ro", + [CPUIDLE_DRIVER] = "current_driver", +}; + + +static char *sysfs_cpuidle_get_one_string(enum cpuidle_string which) +{ + char linebuf[MAX_LINE_LEN]; + char *result; + unsigned int len; + + if (which >= MAX_CPUIDLE_STRING_FILES) + return NULL; + + len = sysfs_cpuidle_read_file(cpuidle_string_files[which], + linebuf, sizeof(linebuf)); + if (len == 0) + return NULL; + + result = strdup(linebuf); + if (result == NULL) + return NULL; + + if (result[strlen(result) - 1] == '\n') + result[strlen(result) - 1] = '\0'; + + return result; +} + +char *cpuidle_get_governor(void) +{ + char *tmp = sysfs_cpuidle_get_one_string(CPUIDLE_GOVERNOR_RO); + if (!tmp) + return sysfs_cpuidle_get_one_string(CPUIDLE_GOVERNOR); + else + return tmp; +} + +char *cpuidle_get_driver(void) +{ + return sysfs_cpuidle_get_one_string(CPUIDLE_DRIVER); +} +/* CPUidle idlestate specific /sys/devices/system/cpu/cpuX/cpuidle/ access */ diff --git a/tools/power/cpupower/lib/cpuidle.h b/tools/power/cpupower/lib/cpuidle.h new file mode 100644 index 000000000..2e10fead2 --- /dev/null +++ b/tools/power/cpupower/lib/cpuidle.h @@ -0,0 +1,24 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef __CPUPOWER_CPUIDLE_H__ +#define __CPUPOWER_CPUIDLE_H__ + +int cpuidle_is_state_disabled(unsigned int cpu, + unsigned int idlestate); +int cpuidle_state_disable(unsigned int cpu, unsigned int idlestate, + unsigned int disable); +unsigned long cpuidle_state_latency(unsigned int cpu, + unsigned int idlestate); +unsigned long cpuidle_state_usage(unsigned int cpu, + unsigned int idlestate); +unsigned long long cpuidle_state_time(unsigned int cpu, + unsigned int idlestate); +char *cpuidle_state_name(unsigned int cpu, + unsigned int idlestate); +char *cpuidle_state_desc(unsigned int cpu, + unsigned int idlestate); +unsigned int cpuidle_state_count(unsigned int cpu); + +char *cpuidle_get_governor(void); +char *cpuidle_get_driver(void); + +#endif /* __CPUPOWER_HELPERS_SYSFS_H__ */ diff --git a/tools/power/cpupower/lib/cpupower.c b/tools/power/cpupower/lib/cpupower.c new file mode 100644 index 000000000..3656e6975 --- /dev/null +++ b/tools/power/cpupower/lib/cpupower.c @@ -0,0 +1,191 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * (C) 2004-2009 Dominik Brodowski <linux@dominikbrodowski.de> + */ + +#include <sys/types.h> +#include <sys/stat.h> +#include <fcntl.h> +#include <unistd.h> +#include <stdio.h> +#include <errno.h> +#include <stdlib.h> + +#include "cpupower.h" +#include "cpupower_intern.h" + +unsigned int cpupower_read_sysfs(const char *path, char *buf, size_t buflen) +{ + int fd; + ssize_t numread; + + fd = open(path, O_RDONLY); + if (fd == -1) + return 0; + + numread = read(fd, buf, buflen - 1); + if (numread < 1) { + close(fd); + return 0; + } + + buf[numread] = '\0'; + close(fd); + + return (unsigned int) numread; +} + +/* + * Detect whether a CPU is online + * + * Returns: + * 1 -> if CPU is online + * 0 -> if CPU is offline + * negative errno values in error case + */ +int cpupower_is_cpu_online(unsigned int cpu) +{ + char path[SYSFS_PATH_MAX]; + int fd; + ssize_t numread; + unsigned long long value; + char linebuf[MAX_LINE_LEN]; + char *endp; + struct stat statbuf; + + snprintf(path, sizeof(path), PATH_TO_CPU "cpu%u", cpu); + + if (stat(path, &statbuf) != 0) + return 0; + + /* + * kernel without CONFIG_HOTPLUG_CPU + * -> cpuX directory exists, but not cpuX/online file + */ + snprintf(path, sizeof(path), PATH_TO_CPU "cpu%u/online", cpu); + if (stat(path, &statbuf) != 0) + return 1; + + fd = open(path, O_RDONLY); + if (fd == -1) + return -errno; + + numread = read(fd, linebuf, MAX_LINE_LEN - 1); + if (numread < 1) { + close(fd); + return -EIO; + } + linebuf[numread] = '\0'; + close(fd); + + value = strtoull(linebuf, &endp, 0); + if (value > 1) + return -EINVAL; + + return value; +} + +/* returns -1 on failure, 0 on success */ +static int sysfs_topology_read_file(unsigned int cpu, const char *fname, int *result) +{ + char linebuf[MAX_LINE_LEN]; + char *endp; + char path[SYSFS_PATH_MAX]; + + snprintf(path, sizeof(path), PATH_TO_CPU "cpu%u/topology/%s", + cpu, fname); + if (cpupower_read_sysfs(path, linebuf, MAX_LINE_LEN) == 0) + return -1; + *result = strtol(linebuf, &endp, 0); + if (endp == linebuf || errno == ERANGE) + return -1; + return 0; +} + +static int __compare(const void *t1, const void *t2) +{ + struct cpuid_core_info *top1 = (struct cpuid_core_info *)t1; + struct cpuid_core_info *top2 = (struct cpuid_core_info *)t2; + if (top1->pkg < top2->pkg) + return -1; + else if (top1->pkg > top2->pkg) + return 1; + else if (top1->core < top2->core) + return -1; + else if (top1->core > top2->core) + return 1; + else if (top1->cpu < top2->cpu) + return -1; + else if (top1->cpu > top2->cpu) + return 1; + else + return 0; +} + +/* + * Returns amount of cpus, negative on error, cpu_top must be + * passed to cpu_topology_release to free resources + * + * Array is sorted after ->pkg, ->core, then ->cpu + */ +int get_cpu_topology(struct cpupower_topology *cpu_top) +{ + int cpu, last_pkg, cpus = sysconf(_SC_NPROCESSORS_CONF); + + cpu_top->core_info = malloc(sizeof(struct cpuid_core_info) * cpus); + if (cpu_top->core_info == NULL) + return -ENOMEM; + cpu_top->pkgs = cpu_top->cores = 0; + for (cpu = 0; cpu < cpus; cpu++) { + cpu_top->core_info[cpu].cpu = cpu; + cpu_top->core_info[cpu].is_online = cpupower_is_cpu_online(cpu); + if(sysfs_topology_read_file( + cpu, + "physical_package_id", + &(cpu_top->core_info[cpu].pkg)) < 0) { + cpu_top->core_info[cpu].pkg = -1; + cpu_top->core_info[cpu].core = -1; + continue; + } + if(sysfs_topology_read_file( + cpu, + "core_id", + &(cpu_top->core_info[cpu].core)) < 0) { + cpu_top->core_info[cpu].pkg = -1; + cpu_top->core_info[cpu].core = -1; + continue; + } + } + + qsort(cpu_top->core_info, cpus, sizeof(struct cpuid_core_info), + __compare); + + /* Count the number of distinct pkgs values. This works + because the primary sort of the core_info struct was just + done by pkg value. */ + last_pkg = cpu_top->core_info[0].pkg; + for(cpu = 1; cpu < cpus; cpu++) { + if (cpu_top->core_info[cpu].pkg != last_pkg && + cpu_top->core_info[cpu].pkg != -1) { + + last_pkg = cpu_top->core_info[cpu].pkg; + cpu_top->pkgs++; + } + } + if (!(cpu_top->core_info[0].pkg == -1)) + cpu_top->pkgs++; + + /* Intel's cores count is not consecutively numbered, there may + * be a core_id of 3, but none of 2. Assume there always is 0 + * Get amount of cores by counting duplicates in a package + for (cpu = 0; cpu_top->core_info[cpu].pkg = 0 && cpu < cpus; cpu++) { + if (cpu_top->core_info[cpu].core == 0) + cpu_top->cores++; + */ + return cpus; +} + +void cpu_topology_release(struct cpupower_topology cpu_top) +{ + free(cpu_top.core_info); +} diff --git a/tools/power/cpupower/lib/cpupower.h b/tools/power/cpupower/lib/cpupower.h new file mode 100644 index 000000000..e4e4292ea --- /dev/null +++ b/tools/power/cpupower/lib/cpupower.h @@ -0,0 +1,36 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef __CPUPOWER_CPUPOWER_H__ +#define __CPUPOWER_CPUPOWER_H__ + +struct cpupower_topology { + /* Amount of CPU cores, packages and threads per core in the system */ + unsigned int cores; + unsigned int pkgs; + unsigned int threads; /* per core */ + + /* Array gets mallocated with cores entries, holding per core info */ + struct cpuid_core_info *core_info; +}; + +struct cpuid_core_info { + int pkg; + int core; + int cpu; + + /* flags */ + unsigned int is_online:1; +}; + +#ifdef __cplusplus +extern "C" { +#endif + +int get_cpu_topology(struct cpupower_topology *cpu_top); +void cpu_topology_release(struct cpupower_topology cpu_top); +int cpupower_is_cpu_online(unsigned int cpu); + +#ifdef __cplusplus +} +#endif + +#endif diff --git a/tools/power/cpupower/lib/cpupower_intern.h b/tools/power/cpupower/lib/cpupower_intern.h new file mode 100644 index 000000000..4887c76d2 --- /dev/null +++ b/tools/power/cpupower/lib/cpupower_intern.h @@ -0,0 +1,6 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#define PATH_TO_CPU "/sys/devices/system/cpu/" +#define MAX_LINE_LEN 4096 +#define SYSFS_PATH_MAX 255 + +unsigned int cpupower_read_sysfs(const char *path, char *buf, size_t buflen); diff --git a/tools/power/cpupower/man/cpupower-frequency-info.1 b/tools/power/cpupower/man/cpupower-frequency-info.1 new file mode 100644 index 000000000..6aa8d239d --- /dev/null +++ b/tools/power/cpupower/man/cpupower-frequency-info.1 @@ -0,0 +1,77 @@ +.TH "CPUPOWER\-FREQUENCY\-INFO" "1" "0.1" "" "cpupower Manual" +.SH "NAME" +.LP +cpupower\-frequency\-info \- Utility to retrieve cpufreq kernel information +.SH "SYNTAX" +.LP +cpupower [ \-c cpulist ] frequency\-info [\fIoptions\fP] +.SH "DESCRIPTION" +.LP +A small tool which prints out cpufreq information helpful to developers and interested users. +.SH "OPTIONS" +.LP +.TP +\fB\-e\fR \fB\-\-debug\fR +Prints out debug information. +.TP +\fB\-f\fR \fB\-\-freq\fR +Get frequency the CPU currently runs at, according to the cpufreq core. +.TP +\fB\-w\fR \fB\-\-hwfreq\fR +Get frequency the CPU currently runs at, by reading it from hardware (only available to root). +.TP +\fB\-l\fR \fB\-\-hwlimits\fR +Determine the minimum and maximum CPU frequency allowed. +.TP +\fB\-d\fR \fB\-\-driver\fR +Determines the used cpufreq kernel driver. +.TP +\fB\-p\fR \fB\-\-policy\fR +Gets the currently used cpufreq policy. +.TP +\fB\-g\fR \fB\-\-governors\fR +Determines available cpufreq governors. +.TP +\fB\-a\fR \fB\-\-related\-cpus\fR +Determines which CPUs run at the same hardware frequency. +.TP +\fB\-a\fR \fB\-\-affected\-cpus\fR +Determines which CPUs need to have their frequency coordinated by software. +.TP +\fB\-s\fR \fB\-\-stats\fR +Shows cpufreq statistics if available. +.TP +\fB\-y\fR \fB\-\-latency\fR +Determines the maximum latency on CPU frequency changes. +.TP +\fB\-o\fR \fB\-\-proc\fR +Prints out information like provided by the /proc/cpufreq interface in 2.4. and early 2.6. kernels. +.TP +\fB\-m\fR \fB\-\-human\fR +human\-readable output for the \-f, \-w, \-s and \-y parameters. +.TP +\fB\-n\fR \fB\-\-no-rounding\fR +Output frequencies and latencies without rounding off values. +.TP +.SH "REMARKS" +.LP +By default only values of core zero are displayed. How to display settings of +other cores is described in the cpupower(1) manpage in the \-\-cpu option section. +.LP +You can't specify more than one of the output specific options \-o \-e \-a \-g \-p \-d \-l \-w \-f \-y. +.LP +You also can't specify the \-o option combined with the \-c option. +.SH "FILES" +.nf +\fI/sys/devices/system/cpu/cpu*/cpufreq/\fP +\fI/proc/cpufreq\fP (deprecated) +\fI/proc/sys/cpu/\fP (deprecated) +.fi +.SH "AUTHORS" +.nf +Dominik Brodowski <linux@brodo.de> \- author +Mattia Dongili<malattia@gmail.com> \- first autolibtoolization +.fi +.SH "SEE ALSO" +.LP +cpupower\-frequency\-set(1), cpupower(1) diff --git a/tools/power/cpupower/man/cpupower-frequency-set.1 b/tools/power/cpupower/man/cpupower-frequency-set.1 new file mode 100644 index 000000000..b50570221 --- /dev/null +++ b/tools/power/cpupower/man/cpupower-frequency-set.1 @@ -0,0 +1,52 @@ +.TH "CPUPOWER\-FREQUENCY\-SET" "1" "0.1" "" "cpupower Manual" +.SH "NAME" +.LP +cpupower\-frequency\-set \- A small tool which allows to modify cpufreq settings. +.SH "SYNTAX" +.LP +cpupower [ \-c cpu ] frequency\-set [\fIoptions\fP] +.SH "DESCRIPTION" +.LP +cpupower frequency\-set allows you to modify cpufreq settings without having to type e.g. "/sys/devices/system/cpu/cpu0/cpufreq/scaling_set_speed" all the time. +.SH "OPTIONS" +.LP +.TP +\fB\-d\fR \fB\-\-min\fR <FREQ> +new minimum CPU frequency the governor may select. +.TP +\fB\-u\fR \fB\-\-max\fR <FREQ> +new maximum CPU frequency the governor may select. +.TP +\fB\-g\fR \fB\-\-governor\fR <GOV> +new cpufreq governor. +.TP +\fB\-f\fR \fB\-\-freq\fR <FREQ> +specific frequency to be set. Requires userspace governor to be available and loaded. +.TP +\fB\-r\fR \fB\-\-related\fR +modify all hardware-related CPUs at the same time +.TP +.SH "REMARKS" +.LP +By default values are applied on all cores. How to modify single core +configurations is described in the cpupower(1) manpage in the \-\-cpu option section. +.LP +The \-f FREQ, \-\-freq FREQ parameter cannot be combined with any other parameter. +.LP +FREQuencies can be passed in Hz, kHz (default), MHz, GHz, or THz by postfixing the value with the wanted unit name, without any space (frequency in kHz =^ Hz * 0.001 =^ MHz * 1000 =^ GHz * 1000000). +.LP +On Linux kernels up to 2.6.29, the \-r or \-\-related parameter is ignored. +.SH "FILES" +.nf +\fI/sys/devices/system/cpu/cpu*/cpufreq/\fP +\fI/proc/cpufreq\fP (deprecated) +\fI/proc/sys/cpu/\fP (deprecated) +.fi +.SH "AUTHORS" +.nf +Dominik Brodowski <linux@brodo.de> \- author +Mattia Dongili<malattia@gmail.com> \- first autolibtoolization +.fi +.SH "SEE ALSO" +.LP +cpupower\-frequency\-info(1), cpupower(1) diff --git a/tools/power/cpupower/man/cpupower-idle-info.1 b/tools/power/cpupower/man/cpupower-idle-info.1 new file mode 100644 index 000000000..20b6345c5 --- /dev/null +++ b/tools/power/cpupower/man/cpupower-idle-info.1 @@ -0,0 +1,91 @@ +.TH "CPUPOWER-IDLE-INFO" "1" "0.1" "" "cpupower Manual" +.SH "NAME" +.LP +cpupower\-idle\-info \- Utility to retrieve cpu idle kernel information +.SH "SYNTAX" +.LP +cpupower [ \-c cpulist ] idle\-info [\fIoptions\fP] +.SH "DESCRIPTION" +.LP +A tool which prints out per cpu idle information helpful to developers and interested users. +.SH "OPTIONS" +.LP +.TP +\fB\-f\fR \fB\-\-silent\fR +Only print a summary of all available C-states in the system. +.TP +\fB\-e\fR \fB\-\-proc\fR +deprecated. +Prints out idle information in old /proc/acpi/processor/*/power format. This +interface has been removed from the kernel for quite some time, do not let +further code depend on this option, best do not use it. + +.SH IDLE\-INFO DESCRIPTIONS +CPU sleep state statistics and descriptions are retrieved from sysfs files, +exported by the cpuidle kernel subsystem. The kernel only updates these +statistics when it enters or leaves an idle state, therefore on a very idle or +a very busy system, these statistics may not be accurate. They still provide a +good overview about the usage and availability of processor sleep states on +the platform. + +Be aware that the sleep states as exported by the hardware or BIOS and used by +the Linux kernel may not exactly reflect the capabilities of the +processor. This often is the case on the X86 architecture when the acpi_idle +driver is used. It is also possible that the hardware overrules the kernel +requests, due to internal activity monitors or other reasons. +On recent X86 platforms it is often possible to read out hardware registers +which monitor the duration of sleep states the processor resided in. The +cpupower monitor tool (cpupower\-monitor(1)) can be used to show real sleep +state residencies. Please refer to the architecture specific description +section below. + +.SH IDLE\-INFO ARCHITECTURE SPECIFIC DESCRIPTIONS +.SS "X86" +POLL idle state + +If cpuidle is active, X86 platforms have one special idle state. +The POLL idle state is not a real idle state, it does not save any +power. Instead, a busy\-loop is executed doing nothing for a short period of +time. This state is used if the kernel knows that work has to be processed +very soon and entering any real hardware idle state may result in a slight +performance penalty. + +There exist two different cpuidle drivers on the X86 architecture platform: + +"acpi_idle" cpuidle driver + +The acpi_idle cpuidle driver retrieves available sleep states (C\-states) from +the ACPI BIOS tables (from the _CST ACPI function on recent platforms or from +the FADT BIOS table on older ones). +The C1 state is not retrieved from ACPI tables. If the C1 state is entered, +the kernel will call the hlt instruction (or mwait on Intel). + +"intel_idle" cpuidle driver + +In kernel 2.6.36 the intel_idle driver was introduced. +It only serves recent Intel CPUs (Nehalem, Westmere, Sandybridge, Atoms or +newer). On older Intel CPUs the acpi_idle driver is still used (if the BIOS +provides C\-state ACPI tables). +The intel_idle driver knows the sleep state capabilities of the processor and +ignores ACPI BIOS exported processor sleep states tables. + +.SH "REMARKS" +.LP +By default only values of core zero are displayed. How to display settings of +other cores is described in the cpupower(1) manpage in the \-\-cpu option +section. +.SH REFERENCES +https://uefi.org/specifications +.SH "FILES" +.nf +\fI/sys/devices/system/cpu/cpu*/cpuidle/state*\fP +\fI/sys/devices/system/cpu/cpuidle/*\fP +.fi +.SH "AUTHORS" +.nf +Thomas Renninger <trenn@suse.de> +.fi +.SH "SEE ALSO" +.LP +cpupower(1), cpupower\-monitor(1), cpupower\-info(1), cpupower\-set(1), +cpupower\-idle\-set(1) diff --git a/tools/power/cpupower/man/cpupower-idle-set.1 b/tools/power/cpupower/man/cpupower-idle-set.1 new file mode 100644 index 000000000..21916cff7 --- /dev/null +++ b/tools/power/cpupower/man/cpupower-idle-set.1 @@ -0,0 +1,79 @@ +.TH "CPUPOWER-IDLE-SET" "1" "0.1" "" "cpupower Manual" +.SH "NAME" +.LP +cpupower\-idle\-set \- Utility to set cpu idle state specific kernel options +.SH "SYNTAX" +.LP +cpupower [ \-c cpulist ] idle\-info [\fIoptions\fP] +.SH "DESCRIPTION" +.LP +The cpupower idle\-set subcommand allows to set cpu idle, also called cpu +sleep state, specific options offered by the kernel. One example is disabling +sleep states. This can be handy for power vs performance tuning. +.SH "OPTIONS" +.LP +.TP +\fB\-d\fR \fB\-\-disable\fR <STATE_NO> +Disable a specific processor sleep state. +.TP +\fB\-e\fR \fB\-\-enable\fR <STATE_NO> +Enable a specific processor sleep state. +.TP +\fB\-D\fR \fB\-\-disable-by-latency\fR <LATENCY> +Disable all idle states with a equal or higher latency than <LATENCY>. + +Enable all idle states with a latency lower than <LATENCY>. +.TP +\fB\-E\fR \fB\-\-enable-all\fR +Enable all idle states if not enabled already. + +.SH "REMARKS" +.LP +Cpuidle Governors Policy on Disabling Sleep States + +.RS 4 +Depending on the used cpuidle governor, implementing the kernel policy +how to choose sleep states, subsequent sleep states on this core, might get +disabled as well. + +There are two cpuidle governors ladder and menu. While the ladder +governor is always available, if CONFIG_CPU_IDLE is selected, the +menu governor additionally requires CONFIG_NO_HZ. + +The behavior and the effect of the disable variable depends on the +implementation of a particular governor. In the ladder governor, for +example, it is not coherent, i.e. if one is disabling a light state, +then all deeper states are disabled as well. Likewise, if one enables a +deep state but a lighter state still is disabled, then this has no effect. +.RE +.LP +Disabling the Lightest Sleep State may not have any Affect + +.RS 4 +If criteria are not met to enter deeper sleep states and the lightest sleep +state is chosen when idle, the kernel may still enter this sleep state, +irrespective of whether it is disabled or not. This is also reflected in +the usage count of the disabled sleep state when using the cpupower idle-info +command. +.RE +.LP +Selecting specific CPU Cores + +.RS 4 +By default processor sleep states of all CPU cores are set. Please refer +to the cpupower(1) manpage in the \-\-cpu option section how to disable +C-states of specific cores. +.RE +.SH "FILES" +.nf +\fI/sys/devices/system/cpu/cpu*/cpuidle/state*\fP +\fI/sys/devices/system/cpu/cpuidle/*\fP +.fi +.SH "AUTHORS" +.nf +Thomas Renninger <trenn@suse.de> +.fi +.SH "SEE ALSO" +.LP +cpupower(1), cpupower\-monitor(1), cpupower\-info(1), cpupower\-set(1), +cpupower\-idle\-info(1) diff --git a/tools/power/cpupower/man/cpupower-info.1 b/tools/power/cpupower/man/cpupower-info.1 new file mode 100644 index 000000000..340bcd0be --- /dev/null +++ b/tools/power/cpupower/man/cpupower-info.1 @@ -0,0 +1,19 @@ +.TH CPUPOWER\-INFO "1" "22/02/2011" "" "cpupower Manual" +.SH NAME +cpupower\-info \- Shows processor power related kernel or hardware configurations +.SH SYNOPSIS +.ft B +.B cpupower info [ \-b ] + +.SH DESCRIPTION +\fBcpupower info \fP shows kernel configurations or processor hardware +registers affecting processor power saving policies. + +Some options are platform wide, some affect single cores. By default values +of core zero are displayed only. cpupower --cpu all cpuinfo will show the +settings of all cores, see cpupower(1) how to choose specific cores. + +.SH "SEE ALSO" +Options are described in detail in: + +cpupower(1), cpupower-set(1) diff --git a/tools/power/cpupower/man/cpupower-monitor.1 b/tools/power/cpupower/man/cpupower-monitor.1 new file mode 100644 index 000000000..8ee737eef --- /dev/null +++ b/tools/power/cpupower/man/cpupower-monitor.1 @@ -0,0 +1,198 @@ +.TH CPUPOWER\-MONITOR "1" "22/02/2011" "" "cpupower Manual" +.SH NAME +cpupower\-monitor \- Report processor frequency and idle statistics +.SH SYNOPSIS +.ft B +.B cpupower monitor +.RB "\-l" + +.B cpupower monitor +.RB [ -c ] [ "\-m <mon1>," [ "<mon2>,..." ] ] +.RB [ "\-i seconds" ] +.br +.B cpupower monitor +.RB [ -c ][ "\-m <mon1>," [ "<mon2>,..." ] ] +.RB command +.br +.SH DESCRIPTION +\fBcpupower-monitor \fP reports processor topology, frequency and idle power +state statistics. Either \fBcommand\fP is forked and +statistics are printed upon its completion, or statistics are printed periodically. + +\fBcpupower-monitor \fP implements independent processor sleep state and +frequency counters. Some are retrieved from kernel statistics, some are +directly reading out hardware registers. Use \-l to get an overview which are +supported on your system. + +.SH Options +.PP +\-l +.RS 4 +List available monitors on your system. Additional details about each monitor +are shown: +.RS 2 +.IP \(bu +The name in quotation marks which can be passed to the \-m parameter. +.IP \(bu +The number of different counters the monitor supports in brackets. +.IP \(bu +The amount of time in seconds the counters might overflow, due to +implementation constraints. +.IP \(bu +The name and a description of each counter and its processor hierarchy level +coverage in square brackets: +.RS 4 +.IP \(bu +[T] \-> Thread +.IP \(bu +[C] \-> Core +.IP \(bu +[P] \-> Processor Package (Socket) +.IP \(bu +[M] \-> Machine/Platform wide counter +.RE +.RE +.RE +.PP +\-m <mon1>,<mon2>,... +.RS 4 +Only display specific monitors. Use the monitor string(s) provided by \-l option. +.RE +.PP +\-i seconds +.RS 4 +Measure interval. +.RE +.PP +\-c +.RS 4 +Schedule the process on every core before starting and ending measuring. +This could be needed for the Idle_Stats monitor when no other MSR based +monitor (has to be run on the core that is measured) is run in parallel. +This is to wake up the processors from deeper sleep states and let the +kernel re +-account its cpuidle (C-state) information before reading the +cpuidle timings from sysfs. +.RE +.PP +command +.RS 4 +Measure idle and frequency characteristics of an arbitrary command/workload. +The executable \fBcommand\fP is forked and upon its exit, statistics gathered since it was +forked are displayed. +.RE +.PP +\-v +.RS 4 +Increase verbosity if the binary was compiled with the DEBUG option set. +.RE + +.SH MONITOR DESCRIPTIONS +.SS "Idle_Stats" +Shows statistics of the cpuidle kernel subsystem. Values are retrieved from +/sys/devices/system/cpu/cpu*/cpuidle/state*/. +The kernel updates these values every time an idle state is entered or +left. Therefore there can be some inaccuracy when cores are in an idle +state for some time when the measure starts or ends. In worst case it can happen +that one core stayed in an idle state for the whole measure time and the idle +state usage time as exported by the kernel did not get updated. In this case +a state residency of 0 percent is shown while it was 100. + +.SS "Mperf" +The name comes from the aperf/mperf (average and maximum) MSR registers used +which are available on recent X86 processors. It shows the average frequency +(including boost frequencies). +The fact that on all recent hardware the mperf timer stops ticking in any idle +state it is also used to show C0 (processor is active) and Cx (processor is in +any sleep state) times. These counters do not have the inaccuracy restrictions +the "Idle_Stats" counters may show. +May work poorly on Linux-2.6.20 through 2.6.29, as the \fBacpi-cpufreq \fP +kernel frequency driver periodically cleared aperf/mperf registers in those +kernels. + +.SS "Nehalem" "SandyBridge" "HaswellExtended" +Intel Core and Package sleep state counters. +Threads (hyperthreaded cores) may not be able to enter deeper core states if +its sibling is utilized. +Deepest package sleep states may in reality show up as machine/platform wide +sleep states and can only be entered if all cores are idle. Look up Intel +manuals (some are provided in the References section) for further details. +The monitors are named after the CPU family where the sleep state capabilities +got introduced and may not match exactly the CPU name of the platform. +For example an IvyBridge processor has sleep state capabilities which got +introduced in Nehalem and SandyBridge processor families. +Thus on an IvyBridge processor one will get Nehalem and SandyBridge sleep +state monitors. +HaswellExtended extra package sleep state capabilities are available only in a +specific Haswell (family 0x45) and probably also other future processors. + +.SS "Fam_12h" "Fam_14h" +AMD laptop and desktop processor (family 12h and 14h) sleep state counters. +The registers are accessed via PCI and therefore can still be read out while +cores have been offlined. + +There is one special counter: NBP1 (North Bridge P1). +This one always returns 0 or 1, depending on whether the North Bridge P1 +power state got entered at least once during measure time. +Being able to enter NBP1 state also depends on graphics power management. +Therefore this counter can be used to verify whether the graphics' driver +power management is working as expected. + +.SH EXAMPLES + +cpupower monitor -l" may show: +.RS 4 +Monitor "Mperf" (3 states) \- Might overflow after 922000000 s + + ... + +Monitor "Idle_Stats" (3 states) \- Might overflow after 4294967295 s + + ... + +.RE +cpupower monitor \-m "Idle_Stats,Mperf" scp /tmp/test /nfs/tmp + +Monitor the scp command, show both Mperf and Idle_Stats states counter +statistics, but in exchanged order. + + + +.RE +Be careful that the typical command to fully utilize one CPU by doing: + +cpupower monitor cat /dev/zero >/dev/null + +Does not work as expected, because the measured output is redirected to +/dev/null. This could get workarounded by putting the line into an own, tiny +shell script. Hit CTRL\-c to terminate the command and get the measure output +displayed. + +.SH REFERENCES +"BIOS and Kernel Developer’s Guide (BKDG) for AMD Family 14h Processors" +https://support.amd.com/us/Processor_TechDocs/43170.pdf + +"Intel® Turbo Boost Technology +in Intel® Core™ Microarchitecture (Nehalem) Based Processors" +http://download.intel.com/design/processor/applnots/320354.pdf + +"Intel® 64 and IA-32 Architectures Software Developer's Manual +Volume 3B: System Programming Guide" +https://www.intel.com/products/processor/manuals + +.SH FILES +.ta +.nf +/dev/cpu/*/msr +/sys/devices/system/cpu/cpu*/cpuidle/state*/. +.fi + +.SH "SEE ALSO" +powertop(8), msr(4), vmstat(8) +.PP +.SH AUTHORS +.nf +Written by Thomas Renninger <trenn@suse.de> + +Nehalem, SandyBridge monitors and command passing +based on turbostat.8 from Len Brown <len.brown@intel.com> diff --git a/tools/power/cpupower/man/cpupower-set.1 b/tools/power/cpupower/man/cpupower-set.1 new file mode 100644 index 000000000..2bcc696f4 --- /dev/null +++ b/tools/power/cpupower/man/cpupower-set.1 @@ -0,0 +1,65 @@ +.TH CPUPOWER\-SET "1" "22/02/2011" "" "cpupower Manual" +.SH NAME +cpupower\-set \- Set processor power related kernel or hardware configurations +.SH SYNOPSIS +.ft B +.B cpupower set [ \-b VAL ] + + +.SH DESCRIPTION +\fBcpupower set \fP sets kernel configurations or directly accesses hardware +registers affecting processor power saving policies. + +Some options are platform wide, some affect single cores. By default values +are applied on all cores. How to modify single core configurations is +described in the cpupower(1) manpage in the \-\-cpu option section. Whether an +option affects the whole system or can be applied to individual cores is +described in the Options sections. + +Use \fBcpupower info \fP to read out current settings and whether they are +supported on the system at all. + +.SH Options +.PP +\-\-perf-bias, \-b +.RS 4 +Sets a register on supported Intel processore which allows software to convey +its policy for the relative importance of performance versus energy savings to +the processor. + +The range of valid numbers is 0-15, where 0 is maximum +performance and 15 is maximum energy efficiency. + +The processor uses this information in model-specific ways +when it must select trade-offs between performance and +energy efficiency. + +This policy hint does not supersede Processor Performance states +(P-states) or CPU Idle power states (C-states), but allows +software to have influence where it would otherwise be unable +to express a preference. + +For example, this setting may tell the hardware how +aggressively or conservatively to control frequency +in the "turbo range" above the explicitly OS-controlled +P-state frequency range. It may also tell the hardware +how aggressively it should enter the OS requested C-states. + +This option can be applied to individual cores only via the \-\-cpu option, +cpupower(1). + +Setting the performance bias value on one CPU can modify the setting on +related CPUs as well (for example all CPUs on one socket), because of +hardware restrictions. +Use \fBcpupower -c all info -b\fP to verify. + +This options needs the msr kernel driver (CONFIG_X86_MSR) loaded. +.RE + +.SH "SEE ALSO" +cpupower-info(1), cpupower-monitor(1), powertop(1) +.PP +.SH AUTHORS +.nf +\-\-perf\-bias parts written by Len Brown <len.brown@intel.com> +Thomas Renninger <trenn@suse.de> diff --git a/tools/power/cpupower/man/cpupower.1 b/tools/power/cpupower/man/cpupower.1 new file mode 100644 index 000000000..a5e4523a2 --- /dev/null +++ b/tools/power/cpupower/man/cpupower.1 @@ -0,0 +1,72 @@ +.TH CPUPOWER "1" "07/03/2011" "" "cpupower Manual" +.SH NAME +cpupower \- Shows and sets processor power related values +.SH SYNOPSIS +.ft B +.B cpupower [ \-c cpulist ] <command> [ARGS] + +.B cpupower \-v|\-\-version + +.B cpupower \-h|\-\-help + +.SH DESCRIPTION +\fBcpupower \fP is a collection of tools to examine and tune power saving +related features of your processor. + +The manpages of the commands (cpupower\-<command>(1)) provide detailed +descriptions of supported features. Run \fBcpupower help\fP to get an overview +of supported commands. + +.SH Options +.PP +\-\-help, \-h +.RS 4 +Shows supported commands and general usage. +.RE +.PP +\-\-cpu cpulist, \-c cpulist +.RS 4 +Only show or set values for specific cores. +This option is not supported by all commands, details can be found in the +manpages of the commands. + +Some commands access all cores (typically the *\-set commands), some only +the first core (typically the *\-info commands) by default. + +The syntax for <cpulist> is based on how the kernel exports CPU bitmasks via +sysfs files. Some examples: +.RS 4 +.TP 16 +Input +Equivalent to +.TP +all +all cores +.TP +0\-3 +0,1,2,3 +.TP +0\-7:2 +0,2,4,6 +.TP +1,3,5-7 +1,3,5,6,7 +.TP +0\-3:2,8\-15:4 +0,2,8,12 +.RE +.RE +.PP +\-\-version, \-v +.RS 4 +Print the package name and version number. + +.SH "SEE ALSO" +cpupower-set(1), cpupower-info(1), cpupower-idle-info(1), +cpupower-idle-set(1), cpupower-frequency-set(1), cpupower-frequency-info(1), +cpupower-monitor(1), powertop(1) +.PP +.SH AUTHORS +.nf +\-\-perf\-bias parts written by Len Brown <len.brown@intel.com> +Thomas Renninger <trenn@suse.de> diff --git a/tools/power/cpupower/po/cs.po b/tools/power/cpupower/po/cs.po new file mode 100644 index 000000000..bfc7e1702 --- /dev/null +++ b/tools/power/cpupower/po/cs.po @@ -0,0 +1,944 @@ +# translation of cs.po to Czech +# Czech translation for cpufrequtils package +# Czech messages for cpufrequtils. +# Copyright (C) 2007 kavol +# This file is distributed under the same license as the cpufrequtils package. +# +# Karel Volný <kavol@seznam.cz>, 2007, 2008. +msgid "" +msgstr "" +"Project-Id-Version: cs\n" +"Report-Msgid-Bugs-To: \n" +"POT-Creation-Date: 2011-03-08 17:03+0100\n" +"PO-Revision-Date: 2008-06-11 16:26+0200\n" +"Last-Translator: Karel Volný <kavol@seznam.cz>\n" +"Language-Team: Czech <diskuze@lists.l10n.cz>\n" +"Language: cs\n" +"MIME-Version: 1.0\n" +"Content-Type: text/plain; charset=UTF-8\n" +"Content-Transfer-Encoding: 8bit\n" +"Plural-Forms: nplurals=3; plural=(n==1) ? 0 : (n>=2 && n<=4) ? 1 : 2;\n" +"X-Generator: KBabel 1.11.4\n" + +#: utils/idle_monitor/nhm_idle.c:36 +msgid "Processor Core C3" +msgstr "" + +#: utils/idle_monitor/nhm_idle.c:43 +msgid "Processor Core C6" +msgstr "" + +#: utils/idle_monitor/nhm_idle.c:51 +msgid "Processor Package C3" +msgstr "" + +#: utils/idle_monitor/nhm_idle.c:58 utils/idle_monitor/amd_fam14h_idle.c:70 +msgid "Processor Package C6" +msgstr "" + +#: utils/idle_monitor/snb_idle.c:33 +msgid "Processor Core C7" +msgstr "" + +#: utils/idle_monitor/snb_idle.c:40 +msgid "Processor Package C2" +msgstr "" + +#: utils/idle_monitor/snb_idle.c:47 +msgid "Processor Package C7" +msgstr "" + +#: utils/idle_monitor/amd_fam14h_idle.c:56 +msgid "Package in sleep state (PC1 or deeper)" +msgstr "" + +#: utils/idle_monitor/amd_fam14h_idle.c:63 +msgid "Processor Package C1" +msgstr "" + +#: utils/idle_monitor/amd_fam14h_idle.c:77 +msgid "North Bridge P1 boolean counter (returns 0 or 1)" +msgstr "" + +#: utils/idle_monitor/mperf_monitor.c:35 +msgid "Processor Core not idle" +msgstr "" + +#: utils/idle_monitor/mperf_monitor.c:42 +msgid "Processor Core in an idle state" +msgstr "" + +#: utils/idle_monitor/mperf_monitor.c:50 +msgid "Average Frequency (including boost) in MHz" +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:66 +#, c-format +msgid "" +"cpupower monitor: [-h] [ [-t] | [-l] | [-m <mon1>,[<mon2>] ] ] [-i " +"interval_sec | -c command ...]\n" +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:69 +#, c-format +msgid "" +"cpupower monitor: [-v] [-h] [ [-t] | [-l] | [-m <mon1>,[<mon2>] ] ] [-i " +"interval_sec | -c command ...]\n" +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:71 +#, c-format +msgid "\t -v: be more verbose\n" +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:73 +#, c-format +msgid "\t -h: print this help\n" +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:74 +#, c-format +msgid "\t -i: time interval to measure for in seconds (default 1)\n" +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:75 +#, c-format +msgid "\t -t: show CPU topology/hierarchy\n" +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:76 +#, c-format +msgid "\t -l: list available CPU sleep monitors (for use with -m)\n" +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:77 +#, c-format +msgid "\t -m: show specific CPU sleep monitors only (in same order)\n" +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:79 +#, c-format +msgid "" +"only one of: -t, -l, -m are allowed\n" +"If none of them is passed," +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:80 +#, c-format +msgid " all supported monitors are shown\n" +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:197 +#, c-format +msgid "Monitor %s, Counter %s has no count function. Implementation error\n" +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:207 +#, c-format +msgid " *is offline\n" +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:236 +#, c-format +msgid "%s: max monitor name length (%d) exceeded\n" +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:250 +#, c-format +msgid "No matching monitor found in %s, try -l option\n" +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:266 +#, c-format +msgid "Monitor \"%s\" (%d states) - Might overflow after %u s\n" +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:319 +#, c-format +msgid "%s took %.5f seconds and exited with status %d\n" +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:406 +#, c-format +msgid "Cannot read number of available processors\n" +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:417 +#, c-format +msgid "Available monitor %s needs root access\n" +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:428 +#, c-format +msgid "No HW Cstate monitors found\n" +msgstr "" + +#: utils/cpupower.c:78 +#, c-format +msgid "cpupower [ -c cpulist ] subcommand [ARGS]\n" +msgstr "" + +#: utils/cpupower.c:79 +#, c-format +msgid "cpupower --version\n" +msgstr "" + +#: utils/cpupower.c:80 +#, c-format +msgid "Supported subcommands are:\n" +msgstr "" + +#: utils/cpupower.c:83 +#, c-format +msgid "" +"\n" +"Some subcommands can make use of the -c cpulist option.\n" +msgstr "" + +#: utils/cpupower.c:84 +#, c-format +msgid "Look at the general cpupower manpage how to use it\n" +msgstr "" + +#: utils/cpupower.c:85 +#, c-format +msgid "and read up the subcommand's manpage whether it is supported.\n" +msgstr "" + +#: utils/cpupower.c:86 +#, c-format +msgid "" +"\n" +"Use cpupower help subcommand for getting help for above subcommands.\n" +msgstr "" + +#: utils/cpupower.c:91 +#, c-format +msgid "Report errors and bugs to %s, please.\n" +msgstr "" +"Chyby v programu prosím hlaste na %s (anglicky).\n" +"Chyby v překladu prosím hlaste na kavol@seznam.cz (česky ;-)\n" + +#: utils/cpupower.c:114 +#, c-format +msgid "Error parsing cpu list\n" +msgstr "" + +#: utils/cpupower.c:172 +#, c-format +msgid "Subcommand %s needs root privileges\n" +msgstr "" + +#: utils/cpufreq-info.c:31 +#, c-format +msgid "Couldn't count the number of CPUs (%s: %s), assuming 1\n" +msgstr "Nelze zjistit počet CPU (%s: %s), předpokládá se 1.\n" + +#: utils/cpufreq-info.c:63 +#, c-format +msgid "" +" minimum CPU frequency - maximum CPU frequency - governor\n" +msgstr "" +" minimální frekvence CPU - maximální frekvence CPU - regulátor\n" + +#: utils/cpufreq-info.c:151 +#, c-format +msgid "Error while evaluating Boost Capabilities on CPU %d -- are you root?\n" +msgstr "" + +#. P state changes via MSR are identified via cpuid 80000007 +#. on Intel and AMD, but we assume boost capable machines can do that +#. if (cpuid_eax(0x80000000) >= 0x80000007 +#. && (cpuid_edx(0x80000007) & (1 << 7))) +#. +#: utils/cpufreq-info.c:161 +#, c-format +msgid " boost state support: \n" +msgstr "" + +#: utils/cpufreq-info.c:163 +#, c-format +msgid " Supported: %s\n" +msgstr "" + +#: utils/cpufreq-info.c:163 utils/cpufreq-info.c:164 +msgid "yes" +msgstr "" + +#: utils/cpufreq-info.c:163 utils/cpufreq-info.c:164 +msgid "no" +msgstr "" + +#: utils/cpufreq-info.c:164 +#, fuzzy, c-format +msgid " Active: %s\n" +msgstr " ovladač: %s\n" + +#: utils/cpufreq-info.c:177 +#, c-format +msgid " Boost States: %d\n" +msgstr "" + +#: utils/cpufreq-info.c:178 +#, c-format +msgid " Total States: %d\n" +msgstr "" + +#: utils/cpufreq-info.c:181 +#, c-format +msgid " Pstate-Pb%d: %luMHz (boost state)\n" +msgstr "" + +#: utils/cpufreq-info.c:184 +#, c-format +msgid " Pstate-P%d: %luMHz\n" +msgstr "" + +#: utils/cpufreq-info.c:211 +#, c-format +msgid " no or unknown cpufreq driver is active on this CPU\n" +msgstr " pro tento CPU není aktivní žádný známý ovladač cpufreq\n" + +#: utils/cpufreq-info.c:213 +#, c-format +msgid " driver: %s\n" +msgstr " ovladač: %s\n" + +#: utils/cpufreq-info.c:219 +#, fuzzy, c-format +msgid " CPUs which run at the same hardware frequency: " +msgstr " CPU, které musí měnit frekvenci zároveň: " + +#: utils/cpufreq-info.c:230 +#, fuzzy, c-format +msgid " CPUs which need to have their frequency coordinated by software: " +msgstr " CPU, které musí měnit frekvenci zároveň: " + +#: utils/cpufreq-info.c:241 +#, c-format +msgid " maximum transition latency: " +msgstr "" + +#: utils/cpufreq-info.c:247 +#, c-format +msgid " hardware limits: " +msgstr " hardwarové meze: " + +#: utils/cpufreq-info.c:256 +#, c-format +msgid " available frequency steps: " +msgstr " dostupné frekvence: " + +#: utils/cpufreq-info.c:269 +#, c-format +msgid " available cpufreq governors: " +msgstr " dostupné regulátory: " + +#: utils/cpufreq-info.c:280 +#, c-format +msgid " current policy: frequency should be within " +msgstr " současná taktika: frekvence by měla být mezi " + +#: utils/cpufreq-info.c:282 +#, c-format +msgid " and " +msgstr " a " + +#: utils/cpufreq-info.c:286 +#, c-format +msgid "" +"The governor \"%s\" may decide which speed to use\n" +" within this range.\n" +msgstr "" +" Regulátor \"%s\" může rozhodnout jakou frekvenci použít\n" +" v těchto mezích.\n" + +#: utils/cpufreq-info.c:293 +#, c-format +msgid " current CPU frequency is " +msgstr " současná frekvence CPU je " + +#: utils/cpufreq-info.c:296 +#, c-format +msgid " (asserted by call to hardware)" +msgstr " (zjištěno hardwarovým voláním)" + +#: utils/cpufreq-info.c:304 +#, c-format +msgid " cpufreq stats: " +msgstr " statistika cpufreq: " + +#: utils/cpufreq-info.c:472 +#, fuzzy, c-format +msgid "Usage: cpupower freqinfo [options]\n" +msgstr "Užití: cpufreq-info [přepínače]\n" + +#: utils/cpufreq-info.c:473 utils/cpufreq-set.c:26 utils/cpupower-set.c:23 +#: utils/cpupower-info.c:22 utils/cpuidle-info.c:148 +#, c-format +msgid "Options:\n" +msgstr "Přepínače:\n" + +#: utils/cpufreq-info.c:474 +#, fuzzy, c-format +msgid " -e, --debug Prints out debug information [default]\n" +msgstr " -e, --debug Vypíše ladicí informace\n" + +#: utils/cpufreq-info.c:475 +#, c-format +msgid "" +" -f, --freq Get frequency the CPU currently runs at, according\n" +" to the cpufreq core *\n" +msgstr "" +" -f, --freq Zjistí aktuální frekvenci, na které CPU běží\n" +" podle cpufreq *\n" + +#: utils/cpufreq-info.c:477 +#, c-format +msgid "" +" -w, --hwfreq Get frequency the CPU currently runs at, by reading\n" +" it from hardware (only available to root) *\n" +msgstr "" +" -w, --hwfreq Zjistí aktuální frekvenci, na které CPU běží\n" +" z hardware (dostupné jen uživateli root) *\n" + +#: utils/cpufreq-info.c:479 +#, c-format +msgid "" +" -l, --hwlimits Determine the minimum and maximum CPU frequency " +"allowed *\n" +msgstr "" +" -l, --hwlimits Zjistí minimální a maximální dostupnou frekvenci CPU " +"*\n" + +#: utils/cpufreq-info.c:480 +#, c-format +msgid " -d, --driver Determines the used cpufreq kernel driver *\n" +msgstr " -d, --driver Zjistí aktivní ovladač cpufreq *\n" + +#: utils/cpufreq-info.c:481 +#, c-format +msgid " -p, --policy Gets the currently used cpufreq policy *\n" +msgstr " -p, --policy Zjistí aktuální taktiku cpufreq *\n" + +#: utils/cpufreq-info.c:482 +#, c-format +msgid " -g, --governors Determines available cpufreq governors *\n" +msgstr " -g, --governors Zjistí dostupné regulátory cpufreq *\n" + +#: utils/cpufreq-info.c:483 +#, fuzzy, c-format +msgid "" +" -r, --related-cpus Determines which CPUs run at the same hardware " +"frequency *\n" +msgstr "" +" -a, --affected-cpus Zjistí, které CPU musí měnit frekvenci zároveň *\n" + +#: utils/cpufreq-info.c:484 +#, fuzzy, c-format +msgid "" +" -a, --affected-cpus Determines which CPUs need to have their frequency\n" +" coordinated by software *\n" +msgstr "" +" -a, --affected-cpus Zjistí, které CPU musí měnit frekvenci zároveň *\n" + +#: utils/cpufreq-info.c:486 +#, c-format +msgid " -s, --stats Shows cpufreq statistics if available\n" +msgstr " -s, --stats Zobrazí statistiku cpufreq, je-li dostupná\n" + +#: utils/cpufreq-info.c:487 +#, fuzzy, c-format +msgid "" +" -y, --latency Determines the maximum latency on CPU frequency " +"changes *\n" +msgstr "" +" -l, --hwlimits Zjistí minimální a maximální dostupnou frekvenci CPU " +"*\n" + +#: utils/cpufreq-info.c:488 +#, c-format +msgid " -b, --boost Checks for turbo or boost modes *\n" +msgstr "" + +#: utils/cpufreq-info.c:489 +#, c-format +msgid "" +" -o, --proc Prints out information like provided by the /proc/" +"cpufreq\n" +" interface in 2.4. and early 2.6. kernels\n" +msgstr "" +" -o, --proc Vypíše informace ve formátu, jaký používalo rozhraní\n" +" /proc/cpufreq v kernelech řady 2.4 a časné 2.6\n" + +#: utils/cpufreq-info.c:491 +#, fuzzy, c-format +msgid "" +" -m, --human human-readable output for the -f, -w, -s and -y " +"parameters\n" +msgstr "" +" -m, --human Výstup parametrů -f, -w a -s v „lidmi čitelném“ " +"formátu\n" + +#: utils/cpufreq-info.c:492 utils/cpuidle-info.c:152 +#, c-format +msgid " -h, --help Prints out this screen\n" +msgstr " -h, --help Vypíše tuto nápovědu\n" + +#: utils/cpufreq-info.c:495 +#, c-format +msgid "" +"If no argument or only the -c, --cpu parameter is given, debug output about\n" +"cpufreq is printed which is useful e.g. for reporting bugs.\n" +msgstr "" +"Není-li zadán žádný parametr nebo je-li zadán pouze přepínač -c, --cpu, " +"jsou\n" +"vypsány ladicí informace, což může být užitečné například při hlášení chyb.\n" + +#: utils/cpufreq-info.c:497 +#, c-format +msgid "" +"For the arguments marked with *, omitting the -c or --cpu argument is\n" +"equivalent to setting it to zero\n" +msgstr "" +"Není-li při použití přepínačů označených * zadán parametr -c nebo --cpu,\n" +"předpokládá se jeho hodnota 0.\n" + +#: utils/cpufreq-info.c:580 +#, c-format +msgid "" +"The argument passed to this tool can't be combined with passing a --cpu " +"argument\n" +msgstr "Zadaný parametr nemůže být použit zároveň s přepínačem -c nebo --cpu\n" + +#: utils/cpufreq-info.c:596 +#, c-format +msgid "" +"You can't specify more than one --cpu parameter and/or\n" +"more than one output-specific argument\n" +msgstr "" +"Nelze zadat více než jeden parametr -c nebo --cpu\n" +"anebo více než jeden parametr určující výstup\n" + +#: utils/cpufreq-info.c:600 utils/cpufreq-set.c:82 utils/cpupower-set.c:42 +#: utils/cpupower-info.c:42 utils/cpuidle-info.c:213 +#, c-format +msgid "invalid or unknown argument\n" +msgstr "neplatný nebo neznámý parametr\n" + +#: utils/cpufreq-info.c:617 +#, c-format +msgid "couldn't analyze CPU %d as it doesn't seem to be present\n" +msgstr "nelze analyzovat CPU %d, vypadá to, že není přítomen\n" + +#: utils/cpufreq-info.c:620 utils/cpupower-info.c:142 +#, c-format +msgid "analyzing CPU %d:\n" +msgstr "analyzuji CPU %d:\n" + +#: utils/cpufreq-set.c:25 +#, fuzzy, c-format +msgid "Usage: cpupower frequency-set [options]\n" +msgstr "Užití: cpufreq-set [přepínače]\n" + +#: utils/cpufreq-set.c:27 +#, c-format +msgid "" +" -d FREQ, --min FREQ new minimum CPU frequency the governor may " +"select\n" +msgstr "" +" -d FREQ, --min FREQ Nová nejnižší frekvence, kterou může regulátor " +"vybrat\n" + +#: utils/cpufreq-set.c:28 +#, c-format +msgid "" +" -u FREQ, --max FREQ new maximum CPU frequency the governor may " +"select\n" +msgstr "" +" -u FREQ, --max FREQ Nová nejvyšší frekvence, kterou může regulátor " +"zvolit\n" + +#: utils/cpufreq-set.c:29 +#, c-format +msgid " -g GOV, --governor GOV new cpufreq governor\n" +msgstr " -g GOV, --governors GOV Nový regulátor cpufreq\n" + +#: utils/cpufreq-set.c:30 +#, c-format +msgid "" +" -f FREQ, --freq FREQ specific frequency to be set. Requires userspace\n" +" governor to be available and loaded\n" +msgstr "" +" -f FREQ, --freq FREQ Frekvence, která má být nastavena. Vyžaduje, aby " +"byl\n" +" v jádře nahrán regulátor ‚userspace‘.\n" + +#: utils/cpufreq-set.c:32 +#, c-format +msgid " -r, --related Switches all hardware-related CPUs\n" +msgstr "" + +#: utils/cpufreq-set.c:33 utils/cpupower-set.c:28 utils/cpupower-info.c:27 +#, fuzzy, c-format +msgid " -h, --help Prints out this screen\n" +msgstr " -h, --help Vypíše tuto nápovědu\n" + +#: utils/cpufreq-set.c:35 +#, fuzzy, c-format +msgid "" +"Notes:\n" +"1. Omitting the -c or --cpu argument is equivalent to setting it to \"all\"\n" +msgstr "" +"Není-li při použití přepínačů označených * zadán parametr -c nebo --cpu,\n" +"předpokládá se jeho hodnota 0.\n" + +#: utils/cpufreq-set.c:37 +#, fuzzy, c-format +msgid "" +"2. The -f FREQ, --freq FREQ parameter cannot be combined with any other " +"parameter\n" +" except the -c CPU, --cpu CPU parameter\n" +"3. FREQuencies can be passed in Hz, kHz (default), MHz, GHz, or THz\n" +" by postfixing the value with the wanted unit name, without any space\n" +" (FREQuency in kHz =^ Hz * 0.001 =^ MHz * 1000 =^ GHz * 1000000).\n" +msgstr "" +"Poznámky:\n" +"1. Vynechání parametru -c nebo --cpu je ekvivalentní jeho nastavení na 0\n" +"2. Přepínač -f nebo --freq nemůže být použit zároveň s žádným jiným vyjma -" +"c\n" +" nebo --cpu\n" +"3. Frekvence (FREQ) mohou být zadány v Hz, kHz (výchozí), MHz, GHz nebo THz\n" +" připojením názvu jednotky bez mezery mezi číslem a jednotkou\n" +" (FREQ v kHz =^ Hz * 0,001 = ^ MHz * 1000 =^ GHz * 1000000)\n" + +#: utils/cpufreq-set.c:57 +#, c-format +msgid "" +"Error setting new values. Common errors:\n" +"- Do you have proper administration rights? (super-user?)\n" +"- Is the governor you requested available and modprobed?\n" +"- Trying to set an invalid policy?\n" +"- Trying to set a specific frequency, but userspace governor is not " +"available,\n" +" for example because of hardware which cannot be set to a specific " +"frequency\n" +" or because the userspace governor isn't loaded?\n" +msgstr "" +"Chyba při nastavování nových hodnot. Obvyklé problémy:\n" +"- Máte patřičná administrátorská práva? (root?)\n" +"- Je požadovaný regulátor dostupný v jádře? (modprobe?)\n" +"- Snažíte se nastavit neplatnou taktiku?\n" +"- Snažíte se nastavit určitou frekvenci, ale není dostupný\n" +" regulátor ‚userspace‘, například protože není nahrán v jádře,\n" +" nebo nelze na tomto hardware nastavit určitou frekvenci?\n" + +#: utils/cpufreq-set.c:170 +#, c-format +msgid "wrong, unknown or unhandled CPU?\n" +msgstr "neznámý nebo nepodporovaný CPU?\n" + +#: utils/cpufreq-set.c:302 +#, c-format +msgid "" +"the -f/--freq parameter cannot be combined with -d/--min, -u/--max or\n" +"-g/--governor parameters\n" +msgstr "" +"přepínač -f/--freq nemůže být použit zároveň\n" +"s přepínačem -d/--min, -u/--max nebo -g/--governor\n" + +#: utils/cpufreq-set.c:308 +#, c-format +msgid "" +"At least one parameter out of -f/--freq, -d/--min, -u/--max, and\n" +"-g/--governor must be passed\n" +msgstr "" +"Musí být zadán alespoň jeden přepínač\n" +"-f/--freq, -d/--min, -u/--max nebo -g/--governor\n" + +#: utils/cpufreq-set.c:347 +#, c-format +msgid "Setting cpu: %d\n" +msgstr "" + +#: utils/cpupower-set.c:22 +#, c-format +msgid "Usage: cpupower set [ -b val ] [ -m val ] [ -s val ]\n" +msgstr "" + +#: utils/cpupower-set.c:24 +#, c-format +msgid "" +" -b, --perf-bias [VAL] Sets CPU's power vs performance policy on some\n" +" Intel models [0-15], see manpage for details\n" +msgstr "" + +#: utils/cpupower-set.c:26 +#, c-format +msgid "" +" -m, --sched-mc [VAL] Sets the kernel's multi core scheduler policy.\n" +msgstr "" + +#: utils/cpupower-set.c:27 +#, c-format +msgid "" +" -s, --sched-smt [VAL] Sets the kernel's thread sibling scheduler " +"policy.\n" +msgstr "" + +#: utils/cpupower-set.c:80 +#, c-format +msgid "--perf-bias param out of range [0-%d]\n" +msgstr "" + +#: utils/cpupower-set.c:91 +#, c-format +msgid "--sched-mc param out of range [0-%d]\n" +msgstr "" + +#: utils/cpupower-set.c:102 +#, c-format +msgid "--sched-smt param out of range [0-%d]\n" +msgstr "" + +#: utils/cpupower-set.c:121 +#, c-format +msgid "Error setting sched-mc %s\n" +msgstr "" + +#: utils/cpupower-set.c:127 +#, c-format +msgid "Error setting sched-smt %s\n" +msgstr "" + +#: utils/cpupower-set.c:146 +#, c-format +msgid "Error setting perf-bias value on CPU %d\n" +msgstr "" + +#: utils/cpupower-info.c:21 +#, c-format +msgid "Usage: cpupower info [ -b ] [ -m ] [ -s ]\n" +msgstr "" + +#: utils/cpupower-info.c:23 +#, c-format +msgid "" +" -b, --perf-bias Gets CPU's power vs performance policy on some\n" +" Intel models [0-15], see manpage for details\n" +msgstr "" + +#: utils/cpupower-info.c:25 +#, fuzzy, c-format +msgid " -m, --sched-mc Gets the kernel's multi core scheduler policy.\n" +msgstr " -p, --policy Zjistí aktuální taktiku cpufreq *\n" + +#: utils/cpupower-info.c:26 +#, c-format +msgid "" +" -s, --sched-smt Gets the kernel's thread sibling scheduler policy.\n" +msgstr "" + +#: utils/cpupower-info.c:28 +#, c-format +msgid "" +"\n" +"Passing no option will show all info, by default only on core 0\n" +msgstr "" + +#: utils/cpupower-info.c:102 +#, c-format +msgid "System's multi core scheduler setting: " +msgstr "" + +#. if sysfs file is missing it's: errno == ENOENT +#: utils/cpupower-info.c:105 utils/cpupower-info.c:114 +#, c-format +msgid "not supported\n" +msgstr "" + +#: utils/cpupower-info.c:111 +#, c-format +msgid "System's thread sibling scheduler setting: " +msgstr "" + +#: utils/cpupower-info.c:126 +#, c-format +msgid "Intel's performance bias setting needs root privileges\n" +msgstr "" + +#: utils/cpupower-info.c:128 +#, c-format +msgid "System does not support Intel's performance bias setting\n" +msgstr "" + +#: utils/cpupower-info.c:147 +#, c-format +msgid "Could not read perf-bias value\n" +msgstr "" + +#: utils/cpupower-info.c:150 +#, c-format +msgid "perf-bias: %d\n" +msgstr "" + +#: utils/cpuidle-info.c:28 +#, fuzzy, c-format +msgid "Analyzing CPU %d:\n" +msgstr "analyzuji CPU %d:\n" + +#: utils/cpuidle-info.c:32 +#, c-format +msgid "CPU %u: No idle states\n" +msgstr "" + +#: utils/cpuidle-info.c:36 +#, c-format +msgid "CPU %u: Can't read idle state info\n" +msgstr "" + +#: utils/cpuidle-info.c:41 +#, c-format +msgid "Could not determine max idle state %u\n" +msgstr "" + +#: utils/cpuidle-info.c:46 +#, c-format +msgid "Number of idle states: %d\n" +msgstr "" + +#: utils/cpuidle-info.c:48 +#, fuzzy, c-format +msgid "Available idle states:" +msgstr " dostupné frekvence: " + +#: utils/cpuidle-info.c:71 +#, c-format +msgid "Flags/Description: %s\n" +msgstr "" + +#: utils/cpuidle-info.c:74 +#, c-format +msgid "Latency: %lu\n" +msgstr "" + +#: utils/cpuidle-info.c:76 +#, c-format +msgid "Usage: %lu\n" +msgstr "" + +#: utils/cpuidle-info.c:78 +#, c-format +msgid "Duration: %llu\n" +msgstr "" + +#: utils/cpuidle-info.c:90 +#, c-format +msgid "Could not determine cpuidle driver\n" +msgstr "" + +#: utils/cpuidle-info.c:94 +#, fuzzy, c-format +msgid "CPUidle driver: %s\n" +msgstr " ovladač: %s\n" + +#: utils/cpuidle-info.c:99 +#, c-format +msgid "Could not determine cpuidle governor\n" +msgstr "" + +#: utils/cpuidle-info.c:103 +#, c-format +msgid "CPUidle governor: %s\n" +msgstr "" + +#: utils/cpuidle-info.c:122 +#, c-format +msgid "CPU %u: Can't read C-state info\n" +msgstr "" + +#. printf("Cstates: %d\n", cstates); +#: utils/cpuidle-info.c:127 +#, c-format +msgid "active state: C0\n" +msgstr "" + +#: utils/cpuidle-info.c:128 +#, c-format +msgid "max_cstate: C%u\n" +msgstr "" + +#: utils/cpuidle-info.c:129 +#, c-format +msgid "maximum allowed latency: %lu usec\n" +msgstr "" + +#: utils/cpuidle-info.c:130 +#, c-format +msgid "states:\t\n" +msgstr "" + +#: utils/cpuidle-info.c:132 +#, c-format +msgid " C%d: type[C%d] " +msgstr "" + +#: utils/cpuidle-info.c:134 +#, c-format +msgid "promotion[--] demotion[--] " +msgstr "" + +#: utils/cpuidle-info.c:135 +#, c-format +msgid "latency[%03lu] " +msgstr "" + +#: utils/cpuidle-info.c:137 +#, c-format +msgid "usage[%08lu] " +msgstr "" + +#: utils/cpuidle-info.c:139 +#, c-format +msgid "duration[%020Lu] \n" +msgstr "" + +#: utils/cpuidle-info.c:147 +#, fuzzy, c-format +msgid "Usage: cpupower idleinfo [options]\n" +msgstr "Užití: cpufreq-info [přepínače]\n" + +#: utils/cpuidle-info.c:149 +#, fuzzy, c-format +msgid " -s, --silent Only show general C-state information\n" +msgstr " -e, --debug Vypíše ladicí informace\n" + +#: utils/cpuidle-info.c:150 +#, fuzzy, c-format +msgid "" +" -o, --proc Prints out information like provided by the /proc/" +"acpi/processor/*/power\n" +" interface in older kernels\n" +msgstr "" +" -o, --proc Vypíše informace ve formátu, jaký používalo rozhraní\n" +" /proc/cpufreq v kernelech řady 2.4 a časné 2.6\n" + +#: utils/cpuidle-info.c:209 +#, fuzzy, c-format +msgid "You can't specify more than one output-specific argument\n" +msgstr "" +"Nelze zadat více než jeden parametr -c nebo --cpu\n" +"anebo více než jeden parametr určující výstup\n" + +#~ msgid "" +#~ " -c CPU, --cpu CPU CPU number which information shall be determined " +#~ "about\n" +#~ msgstr "" +#~ " -c CPU, --cpu CPU Číslo CPU, o kterém se mají zjistit informace\n" + +#~ msgid "" +#~ " -c CPU, --cpu CPU number of CPU where cpufreq settings shall be " +#~ "modified\n" +#~ msgstr "" +#~ " -c CPU, --cpu CPU Číslo CPU pro který se má provést nastavení " +#~ "cpufreq\n" diff --git a/tools/power/cpupower/po/de.po b/tools/power/cpupower/po/de.po new file mode 100644 index 000000000..9780a447b --- /dev/null +++ b/tools/power/cpupower/po/de.po @@ -0,0 +1,977 @@ +# German translations for cpufrequtils package +# German messages for cpufrequtils. +# Copyright (C) 2004-2009 Dominik Brodowski <linux@dominikbrodowski.net> +# This file is distributed under the same license as the cpufrequtils package. +# +msgid "" +msgstr "" +"Project-Id-Version: cpufrequtils 006\n" +"Report-Msgid-Bugs-To: \n" +"POT-Creation-Date: 2011-03-08 17:03+0100\n" +"PO-Revision-Date: 2019-06-02 15:23+0200\n" +"Last-Translator: Benjamin Weis <benjamin.weis@gmx.com>\n" +"Language-Team: NONE\n" +"Language: \n" +"MIME-Version: 1.0\n" +"Content-Type: text/plain; charset=UTF-8\n" +"Content-Transfer-Encoding: 8bit\n" +"Plural-Forms: nplurals=2; plural=(n != 1);\n" + +#: utils/idle_monitor/nhm_idle.c:36 +msgid "Processor Core C3" +msgstr "Prozessorkern C3" + +#: utils/idle_monitor/nhm_idle.c:43 +msgid "Processor Core C6" +msgstr "Prozessorkern C6" + +#: utils/idle_monitor/nhm_idle.c:51 +msgid "Processor Package C3" +msgstr "Prozessorpaket C3" + +#: utils/idle_monitor/nhm_idle.c:58 utils/idle_monitor/amd_fam14h_idle.c:70 +msgid "Processor Package C6" +msgstr "Prozessorpaket C6" + +#: utils/idle_monitor/snb_idle.c:33 +msgid "Processor Core C7" +msgstr "Prozessorkern C7" + +#: utils/idle_monitor/snb_idle.c:40 +msgid "Processor Package C2" +msgstr "Prozessorpaket C2" + +#: utils/idle_monitor/snb_idle.c:47 +msgid "Processor Package C7" +msgstr "Prozessorpaket C7" + +#: utils/idle_monitor/amd_fam14h_idle.c:56 +msgid "Package in sleep state (PC1 or deeper)" +msgstr "Paket in Schlafzustand (PC1 oder tiefer)" + +#: utils/idle_monitor/amd_fam14h_idle.c:63 +msgid "Processor Package C1" +msgstr "Prozessorpaket C1" + +#: utils/idle_monitor/amd_fam14h_idle.c:77 +msgid "North Bridge P1 boolean counter (returns 0 or 1)" +msgstr "North Bridge P1 boolescher Zähler (gibt 0 oder 1 zurück)" + +#: utils/idle_monitor/mperf_monitor.c:35 +msgid "Processor Core not idle" +msgstr "Prozessorkern ist nicht im Leerlauf" + +#: utils/idle_monitor/mperf_monitor.c:42 +msgid "Processor Core in an idle state" +msgstr "Prozessorkern ist in einem Ruhezustand" + +#: utils/idle_monitor/mperf_monitor.c:50 +msgid "Average Frequency (including boost) in MHz" +msgstr "Durchschnittliche Frequenz (einschließlich Boost) in MHz" + +#: utils/idle_monitor/cpupower-monitor.c:66 +#, c-format +msgid "" +"cpupower monitor: [-h] [ [-t] | [-l] | [-m <mon1>,[<mon2>] ] ] [-i " +"interval_sec | -c command ...]\n" +msgstr "" +"cpupower monitor: [-h] [ [-t] | [-l] | [-m <mon1>,[<mon2>] ] ] [-i " +"interval_sec | -c Befehl ...]\n" + +#: utils/idle_monitor/cpupower-monitor.c:69 +#, c-format +msgid "" +"cpupower monitor: [-v] [-h] [ [-t] | [-l] | [-m <mon1>,[<mon2>] ] ] [-i " +"interval_sec | -c command ...]\n" +msgstr "" +"cpupower monitor: [-v] [-h] [ [-t] | [-l] | [-m <mon1>,[<mon2>] ] ] [-i " +"interval_sec | -c Befehl ...]\n" + +#: utils/idle_monitor/cpupower-monitor.c:71 +#, c-format +msgid "\t -v: be more verbose\n" +msgstr "\t -v: ausführlicher\n" + +#: utils/idle_monitor/cpupower-monitor.c:73 +#, c-format +msgid "\t -h: print this help\n" +msgstr "\t -h: diese Hilfe ausgeben\n" + +#: utils/idle_monitor/cpupower-monitor.c:74 +#, c-format +msgid "\t -i: time interval to measure for in seconds (default 1)\n" +msgstr "\t -i: Zeitintervall für die Messung in Sekunden (Standard 1)\n" + +#: utils/idle_monitor/cpupower-monitor.c:75 +#, c-format +msgid "\t -t: show CPU topology/hierarchy\n" +msgstr "\t -t: CPU-Topologie/Hierarchie anzeigen\n" + +#: utils/idle_monitor/cpupower-monitor.c:76 +#, c-format +msgid "\t -l: list available CPU sleep monitors (for use with -m)\n" +msgstr "" +"\t -l: verfügbare CPU-Schlafwächter auflisten (für Verwendung mit -m)\n" + +#: utils/idle_monitor/cpupower-monitor.c:77 +#, c-format +msgid "\t -m: show specific CPU sleep monitors only (in same order)\n" +msgstr "" +"\t -m: spezifische CPU-Schlafwächter anzeigen (in gleicher Reihenfolge)\n" + +#: utils/idle_monitor/cpupower-monitor.c:79 +#, c-format +msgid "" +"only one of: -t, -l, -m are allowed\n" +"If none of them is passed," +msgstr "" +"nur einer von: -t, -l, -m ist erlaubt\n" +"Wenn keiner von ihnen übergeben wird," + +#: utils/idle_monitor/cpupower-monitor.c:80 +#, c-format +msgid " all supported monitors are shown\n" +msgstr " werden alle unterstützten Wächter angezeigt\n" + +#: utils/idle_monitor/cpupower-monitor.c:197 +#, c-format +msgid "Monitor %s, Counter %s has no count function. Implementation error\n" +msgstr "Wächter %s, Zähler %s hat keine Zählfunktion. Implementierungsfehler\n" + +#: utils/idle_monitor/cpupower-monitor.c:207 +#, c-format +msgid " *is offline\n" +msgstr " *ist offline\n" + +#: utils/idle_monitor/cpupower-monitor.c:236 +#, c-format +msgid "%s: max monitor name length (%d) exceeded\n" +msgstr "%s: max. Wächternamenslänge (%d) überschritten\n" + +#: utils/idle_monitor/cpupower-monitor.c:250 +#, c-format +msgid "No matching monitor found in %s, try -l option\n" +msgstr "Kein passender Wächter in %s gefunden, versuchen Sie die Option -l\n" + +#: utils/idle_monitor/cpupower-monitor.c:266 +#, c-format +msgid "Monitor \"%s\" (%d states) - Might overflow after %u s\n" +msgstr "Wächter \"%s\" (%d Zustände) - Könnte nach %u s überlaufen\n" + +#: utils/idle_monitor/cpupower-monitor.c:319 +#, c-format +msgid "%s took %.5f seconds and exited with status %d\n" +msgstr "%s hat %.5f Sekunden gedauert und hat sich mit Status %d beendet\n" + +#: utils/idle_monitor/cpupower-monitor.c:406 +#, c-format +msgid "Cannot read number of available processors\n" +msgstr "Anzahl der verfügbaren Prozessoren kann nicht gelesen werden\n" + +#: utils/idle_monitor/cpupower-monitor.c:417 +#, c-format +msgid "Available monitor %s needs root access\n" +msgstr "Verfügbarer Wächter %s benötigt root-Zugriff\n" + +#: utils/idle_monitor/cpupower-monitor.c:428 +#, c-format +msgid "No HW Cstate monitors found\n" +msgstr "Keine HW C-Zustandswächter gefunden\n" + +#: utils/cpupower.c:78 +#, c-format +msgid "cpupower [ -c cpulist ] subcommand [ARGS]\n" +msgstr "cpupower [ -c cpulist ] Unterbefehl [ARGS]\n" + +#: utils/cpupower.c:79 +#, c-format +msgid "cpupower --version\n" +msgstr "cpupower --version\n" + +#: utils/cpupower.c:80 +#, c-format +msgid "Supported subcommands are:\n" +msgstr "Unterstützte Unterbefehle sind:\n" + +#: utils/cpupower.c:83 +#, c-format +msgid "" +"\n" +"Some subcommands can make use of the -c cpulist option.\n" +msgstr "" +"\n" +"Einige Unterbefehle können die Option -c cpulist verwenden.\n" + +#: utils/cpupower.c:84 +#, c-format +msgid "Look at the general cpupower manpage how to use it\n" +msgstr "" +"Schauen Sie sich die allgemeine cpupower manpage an, um zu erfahren, wie man " +"es benutzt\n" + +#: utils/cpupower.c:85 +#, c-format +msgid "and read up the subcommand's manpage whether it is supported.\n" +msgstr "" + +#: utils/cpupower.c:86 +#, c-format +msgid "" +"\n" +"Use cpupower help subcommand for getting help for above subcommands.\n" +msgstr "" + +#: utils/cpupower.c:91 +#, c-format +msgid "Report errors and bugs to %s, please.\n" +msgstr "Bitte melden Sie Fehler an %s.\n" + +#: utils/cpupower.c:114 +#, c-format +msgid "Error parsing cpu list\n" +msgstr "Fehler beim Parsen der CPU-Liste\n" + +#: utils/cpupower.c:172 +#, c-format +msgid "Subcommand %s needs root privileges\n" +msgstr "Unterbefehl %s benötigt root-Rechte\n" + +#: utils/cpufreq-info.c:31 +#, c-format +msgid "Couldn't count the number of CPUs (%s: %s), assuming 1\n" +msgstr "" +"Anzahl der CPUs konnte nicht herausgefinden werden (%s: %s), es wird daher 1 " +"angenommen\n" + +#: utils/cpufreq-info.c:63 +#, c-format +msgid "" +" minimum CPU frequency - maximum CPU frequency - governor\n" +msgstr " minimale CPU-Frequenz - maximale CPU-Frequenz - Regler\n" + +#: utils/cpufreq-info.c:151 +#, c-format +msgid "Error while evaluating Boost Capabilities on CPU %d -- are you root?\n" +msgstr "" +"Fehler beim Evaluieren der Boost-Fähigkeiten bei CPU %d -- sind Sie root?\n" + +#. P state changes via MSR are identified via cpuid 80000007 +#. on Intel and AMD, but we assume boost capable machines can do that +#. if (cpuid_eax(0x80000000) >= 0x80000007 +#. && (cpuid_edx(0x80000007) & (1 << 7))) +#. +#: utils/cpufreq-info.c:161 +#, c-format +msgid " boost state support: \n" +msgstr " Boost-Zustand-Unterstützung: \n" + +#: utils/cpufreq-info.c:163 +#, c-format +msgid " Supported: %s\n" +msgstr " Unterstützt: %s\n" + +#: utils/cpufreq-info.c:163 utils/cpufreq-info.c:164 +msgid "yes" +msgstr "ja" + +#: utils/cpufreq-info.c:163 utils/cpufreq-info.c:164 +msgid "no" +msgstr "nein" + +#: utils/cpufreq-info.c:164 +#, c-format +msgid " Active: %s\n" +msgstr " Aktiv: %s\n" + +#: utils/cpufreq-info.c:177 +#, c-format +msgid " Boost States: %d\n" +msgstr " Boost-Zustände: %d\n" + +#: utils/cpufreq-info.c:178 +#, c-format +msgid " Total States: %d\n" +msgstr " Gesamtzustände: %d\n" + +#: utils/cpufreq-info.c:181 +#, c-format +msgid " Pstate-Pb%d: %luMHz (boost state)\n" +msgstr " Pstate-Pb%d: %luMHz (Boost-Zustand)\n" + +#: utils/cpufreq-info.c:184 +#, c-format +msgid " Pstate-P%d: %luMHz\n" +msgstr " Pstate-P%d: %luMHz\n" + +#: utils/cpufreq-info.c:211 +#, c-format +msgid " no or unknown cpufreq driver is active on this CPU\n" +msgstr " kein oder ein unbekannter cpufreq-Treiber ist auf dieser CPU aktiv\n" + +#: utils/cpufreq-info.c:213 +#, c-format +msgid " driver: %s\n" +msgstr " Treiber: %s\n" + +#: utils/cpufreq-info.c:219 +#, c-format +msgid " CPUs which run at the same hardware frequency: " +msgstr " CPUs, die mit der gleichen Hardwarefrequenz laufen: " + +#: utils/cpufreq-info.c:230 +#, c-format +msgid " CPUs which need to have their frequency coordinated by software: " +msgstr " CPUs, die ihre Frequenz mit Software koordinieren müssen: " + +#: utils/cpufreq-info.c:241 +#, c-format +msgid " maximum transition latency: " +msgstr " Maximale Dauer eines Taktfrequenzwechsels: " + +#: utils/cpufreq-info.c:247 +#, c-format +msgid " hardware limits: " +msgstr " Hardwarebegrenzungen: " + +#: utils/cpufreq-info.c:256 +#, c-format +msgid " available frequency steps: " +msgstr " verfügbare Frequenzschritte: " + +#: utils/cpufreq-info.c:269 +#, c-format +msgid " available cpufreq governors: " +msgstr " verfügbare cpufreq-Regler: " + +#: utils/cpufreq-info.c:280 +#, c-format +msgid " current policy: frequency should be within " +msgstr " momentane Richtlinie: Frequenz sollte innerhalb " + +#: utils/cpufreq-info.c:282 +#, c-format +msgid " and " +msgstr " und " + +#: utils/cpufreq-info.c:286 +#, c-format +msgid "" +"The governor \"%s\" may decide which speed to use\n" +" within this range.\n" +msgstr "" +" sein. Der Regler \"%s\" kann frei entscheiden,\n" +" welche Geschwindigkeit er in diesem Bereich verwendet.\n" + +#: utils/cpufreq-info.c:293 +#, c-format +msgid " current CPU frequency is " +msgstr " momentane CPU-Frequenz ist " + +#: utils/cpufreq-info.c:296 +#, c-format +msgid " (asserted by call to hardware)" +msgstr " (durch Aufruf der Hardware sichergestellt)" + +#: utils/cpufreq-info.c:304 +#, c-format +msgid " cpufreq stats: " +msgstr " cpufreq-Statistiken: " + +#: utils/cpufreq-info.c:472 +#, c-format +msgid "Usage: cpupower freqinfo [options]\n" +msgstr "Aufruf: cpupower freqinfo [Optionen]\n" + +#: utils/cpufreq-info.c:473 utils/cpufreq-set.c:26 utils/cpupower-set.c:23 +#: utils/cpupower-info.c:22 utils/cpuidle-info.c:148 +#, c-format +msgid "Options:\n" +msgstr "Optionen:\n" + +#: utils/cpufreq-info.c:474 +#, c-format +msgid " -e, --debug Prints out debug information [default]\n" +msgstr " -e, --debug Gibt Debug-Informationen aus [Standard]\n" + +#: utils/cpufreq-info.c:475 +#, c-format +msgid "" +" -f, --freq Get frequency the CPU currently runs at, according\n" +" to the cpufreq core *\n" +msgstr "" +" -f, --freq Findet die momentane CPU-Taktfrquenz heraus (nach\n" +" Meinung des Betriebssystems) *\n" + +#: utils/cpufreq-info.c:477 +#, c-format +msgid "" +" -w, --hwfreq Get frequency the CPU currently runs at, by reading\n" +" it from hardware (only available to root) *\n" +msgstr "" +" -w, --hwfreq Findet die momentane CPU-Taktfrequenz heraus\n" +" (verifiziert durch Nachfrage bei der Hardware)\n" +" [nur der Administrator kann dies tun] *\n" + +#: utils/cpufreq-info.c:479 +#, c-format +msgid "" +" -l, --hwlimits Determine the minimum and maximum CPU frequency " +"allowed *\n" +msgstr "" +" -l, --hwlimits Findet die minimale und maximale Taktfrequenz heraus " +"*\n" + +#: utils/cpufreq-info.c:480 +#, c-format +msgid " -d, --driver Determines the used cpufreq kernel driver *\n" +msgstr " -d, --driver Findet den momentanen Treiber heraus *\n" + +#: utils/cpufreq-info.c:481 +#, c-format +msgid " -p, --policy Gets the currently used cpufreq policy *\n" +msgstr " -p, --policy Findet die momentane Taktik heraus *\n" + +#: utils/cpufreq-info.c:482 +#, c-format +msgid " -g, --governors Determines available cpufreq governors *\n" +msgstr " -g, --governors Ermittelt verfügbare cpufreq-Regler *\n" + +#: utils/cpufreq-info.c:483 +#, c-format +msgid "" +" -r, --related-cpus Determines which CPUs run at the same hardware " +"frequency *\n" +msgstr "" +" -r, --related-cpus Findet heraus, welche CPUs mit derselben " +"physikalischen\n" +" Taktfrequenz laufen *\n" + +#: utils/cpufreq-info.c:484 +#, c-format +msgid "" +" -a, --affected-cpus Determines which CPUs need to have their frequency\n" +" coordinated by software *\n" +msgstr "" +" -a, --affected-cpus Findet heraus, von welchen CPUs die Taktfrequenz " +"durch\n" +" Software koordiniert werden muss *\n" + +#: utils/cpufreq-info.c:486 +#, c-format +msgid " -s, --stats Shows cpufreq statistics if available\n" +msgstr " -s, --stats Zeigt cpufreq-Statistiken an, falls vorhanden\n" + +#: utils/cpufreq-info.c:487 +#, c-format +msgid "" +" -y, --latency Determines the maximum latency on CPU frequency " +"changes *\n" +msgstr "" +" -y, --latency Findet die maximale Dauer eines Taktfrequenzwechsels " +"heraus *\n" + +#: utils/cpufreq-info.c:488 +#, c-format +msgid " -b, --boost Checks for turbo or boost modes *\n" +msgstr " -b, --boost Prüft auf Turbo- oder Boost-Modi *\n" + +#: utils/cpufreq-info.c:489 +#, c-format +msgid "" +" -o, --proc Prints out information like provided by the " +"/proc/cpufreq\n" +" interface in 2.4. and early 2.6. kernels\n" +msgstr "" +" -o, --proc Erzeugt Informationen in einem ähnlichem Format zu " +"dem\n" +" der /proc/cpufreq-Datei in 2.4. und frühen 2.6.\n" +" Kernel-Versionen\n" + +#: utils/cpufreq-info.c:491 +#, c-format +msgid "" +" -m, --human human-readable output for the -f, -w, -s and -y " +"parameters\n" +msgstr "" +" -m, --human Formatiert Taktfrequenz- und Zeitdauerangaben in " +"besser\n" +" lesbarer Form (MHz, GHz; us, ms)\n" + +#: utils/cpufreq-info.c:492 utils/cpuidle-info.c:152 +#, c-format +msgid " -h, --help Prints out this screen\n" +msgstr " -h, --help Gibt diese Kurzübersicht aus\n" + +#: utils/cpufreq-info.c:495 +#, c-format +msgid "" +"If no argument or only the -c, --cpu parameter is given, debug output about\n" +"cpufreq is printed which is useful e.g. for reporting bugs.\n" +msgstr "" +"Sofern kein anderer Parameter als '-c, --cpu' angegeben wird, liefert " +"dieses\n" +"Programm Informationen, die z.B. zum Berichten von Fehlern nützlich sind.\n" + +#: utils/cpufreq-info.c:497 +#, c-format +msgid "" +"For the arguments marked with *, omitting the -c or --cpu argument is\n" +"equivalent to setting it to zero\n" +msgstr "" +"Für die mit * markierten Argumente ist das Weglassen des Arguments\n" +"-c oder --cpu gleichbedeutend mit der Einstellung auf Null\n" + +#: utils/cpufreq-info.c:580 +#, c-format +msgid "" +"The argument passed to this tool can't be combined with passing a --cpu " +"argument\n" +msgstr "Diese Option kann nicht mit der --cpu-Option kombiniert werden\n" + +#: utils/cpufreq-info.c:596 +#, c-format +msgid "" +"You can't specify more than one --cpu parameter and/or\n" +"more than one output-specific argument\n" +msgstr "" +"Sie können nicht mehr als einen Parameter --cpu und/oder\n" +"mehr als ein ausgabespezifisches Argument angeben\n" + +#: utils/cpufreq-info.c:600 utils/cpufreq-set.c:82 utils/cpupower-set.c:42 +#: utils/cpupower-info.c:42 utils/cpuidle-info.c:213 +#, c-format +msgid "invalid or unknown argument\n" +msgstr "unbekannter oder falscher Parameter\n" + +#: utils/cpufreq-info.c:617 +#, c-format +msgid "couldn't analyze CPU %d as it doesn't seem to be present\n" +msgstr "" +"CPU %d konnte nicht analysiert werden, da sie scheinbar nicht existiert\n" + +#: utils/cpufreq-info.c:620 utils/cpupower-info.c:142 +#, c-format +msgid "analyzing CPU %d:\n" +msgstr "CPU %d wird analysiert:\n" + +#: utils/cpufreq-set.c:25 +#, c-format +msgid "Usage: cpupower frequency-set [options]\n" +msgstr "Aufruf: cpupower frequency-set [Optionen]\n" + +#: utils/cpufreq-set.c:27 +#, c-format +msgid "" +" -d FREQ, --min FREQ new minimum CPU frequency the governor may " +"select\n" +msgstr "" +" -d FREQ, --min FREQ neue minimale CPU-Frequenz, die der Regler\n" +" auswählen darf\n" + +#: utils/cpufreq-set.c:28 +#, c-format +msgid "" +" -u FREQ, --max FREQ new maximum CPU frequency the governor may " +"select\n" +msgstr "" +" -u FREQ, --max FREQ neue maximale Taktfrequenz, die der Regler\n" +" auswählen darf\n" + +#: utils/cpufreq-set.c:29 +#, c-format +msgid " -g GOV, --governor GOV new cpufreq governor\n" +msgstr " -g GOV, --governors GOV neuer cpufreq-Regler\n" + +#: utils/cpufreq-set.c:30 +#, c-format +msgid "" +" -f FREQ, --freq FREQ specific frequency to be set. Requires userspace\n" +" governor to be available and loaded\n" +msgstr "" +" -f FREQ, --freq FREQ bestimmte Frequenz, die eingestellt werden soll.\n" +" Erfordert einen verfügbaren und geladenen " +"userspace-Regler\n" + +#: utils/cpufreq-set.c:32 +#, c-format +msgid " -r, --related Switches all hardware-related CPUs\n" +msgstr " -r, --related Schaltet alle hardwarebezogenen CPUs um\n" + +#: utils/cpufreq-set.c:33 utils/cpupower-set.c:28 utils/cpupower-info.c:27 +#, c-format +msgid " -h, --help Prints out this screen\n" +msgstr " -h, --help Gibt diesen Bildschirm aus\n" + +#: utils/cpufreq-set.c:35 +#, c-format +msgid "" +"Notes:\n" +"1. Omitting the -c or --cpu argument is equivalent to setting it to \"all\"\n" +msgstr "" +"Hinweis:\n" +"1. Das Weglassen des Arguments -c oder --cpu ist gleichbedeutend mit der " +"Einstellung auf \"all\"\n" + +#: utils/cpufreq-set.c:37 +#, fuzzy, c-format +msgid "" +"2. The -f FREQ, --freq FREQ parameter cannot be combined with any other " +"parameter\n" +" except the -c CPU, --cpu CPU parameter\n" +"3. FREQuencies can be passed in Hz, kHz (default), MHz, GHz, or THz\n" +" by postfixing the value with the wanted unit name, without any space\n" +" (FREQuency in kHz =^ Hz * 0.001 =^ MHz * 1000 =^ GHz * 1000000).\n" +msgstr "" +"Hinweise:\n" +"1. Sofern kein -c oder --cpu-Parameter angegeben ist, wird '--cpu 0'\n" +" angenommen\n" +"2. Der Parameter -f bzw. --freq kann mit keinem anderen als dem Parameter\n" +" -c bzw. --cpu kombiniert werden\n" +"3. FREQuenzen können in Hz, kHz (Standard), MHz, GHz oder THz eingegeben\n" +" werden, indem der Wert und unmittelbar anschließend (ohne Leerzeichen!)\n" +" die Einheit angegeben werden. (Bsp: 1GHz )\n" +" (FREQuenz in kHz =^ MHz * 1000 =^ GHz * 1000000).\n" + +#: utils/cpufreq-set.c:57 +#, c-format +msgid "" +"Error setting new values. Common errors:\n" +"- Do you have proper administration rights? (super-user?)\n" +"- Is the governor you requested available and modprobed?\n" +"- Trying to set an invalid policy?\n" +"- Trying to set a specific frequency, but userspace governor is not " +"available,\n" +" for example because of hardware which cannot be set to a specific " +"frequency\n" +" or because the userspace governor isn't loaded?\n" +msgstr "" +"Fehler beim Festlegen neuer Werte. Häufige Fehler:\n" +"- Verfügen Sie über die erforderlichen Administrationsrechte? (Superuser?)\n" +"- Ist der von Ihnen gewünschte Regler verfügbar und mittels modprobe " +"geladen?\n" +"- Versuchen Sie eine ungültige Richtlinie festzulegen?\n" +"- Versuchen Sie eine bestimmte Frequenz festzulegen, aber der " +"userspace-Regler ist nicht verfügbar,\n" +" z.B. wegen Hardware, die nicht auf eine bestimmte Frequenz eingestellt " +"werden kann\n" +" oder weil der userspace-Regler nicht geladen ist?\n" + +#: utils/cpufreq-set.c:170 +#, c-format +msgid "wrong, unknown or unhandled CPU?\n" +msgstr "falsche, unbekannte oder nicht regelbare CPU?\n" + +#: utils/cpufreq-set.c:302 +#, c-format +msgid "" +"the -f/--freq parameter cannot be combined with -d/--min, -u/--max or\n" +"-g/--governor parameters\n" +msgstr "" +"Der -f bzw. --freq-Parameter kann nicht mit den Parametern -d/--min, " +"-u/--max\n" +"oder -g/--governor kombiniert werden\n" + +#: utils/cpufreq-set.c:308 +#, c-format +msgid "" +"At least one parameter out of -f/--freq, -d/--min, -u/--max, and\n" +"-g/--governor must be passed\n" +msgstr "" +"Mindestens ein Parameter aus -f/--freq, -d/--min, -u/--max und\n" +"-g/--governor muss übergeben werden\n" + +#: utils/cpufreq-set.c:347 +#, c-format +msgid "Setting cpu: %d\n" +msgstr "CPU einstellen: %d\n" + +#: utils/cpupower-set.c:22 +#, c-format +msgid "Usage: cpupower set [ -b val ] [ -m val ] [ -s val ]\n" +msgstr "Aufruf: cpupower set [ -b val ] [ -m val ] [ -s val ]\n" + +#: utils/cpupower-set.c:24 +#, c-format +msgid "" +" -b, --perf-bias [VAL] Sets CPU's power vs performance policy on some\n" +" Intel models [0-15], see manpage for details\n" +msgstr "" + +#: utils/cpupower-set.c:26 +#, c-format +msgid "" +" -m, --sched-mc [VAL] Sets the kernel's multi core scheduler policy.\n" +msgstr "" +" -m, --sched-mc [VAL] Legt die Mehrkern-Scheduler-Richtlinie des " +"Kernels fest.\n" + +#: utils/cpupower-set.c:27 +#, c-format +msgid "" +" -s, --sched-smt [VAL] Sets the kernel's thread sibling scheduler " +"policy.\n" +msgstr "" + +#: utils/cpupower-set.c:80 +#, c-format +msgid "--perf-bias param out of range [0-%d]\n" +msgstr "--perf-bias-Parameter außerhalb des Bereichs [0-%d]\n" + +#: utils/cpupower-set.c:91 +#, c-format +msgid "--sched-mc param out of range [0-%d]\n" +msgstr "Parameter --sched-mc außerhalb des Bereichs [0-%d]\n" + +#: utils/cpupower-set.c:102 +#, c-format +msgid "--sched-smt param out of range [0-%d]\n" +msgstr "Parameter --sched-smt außerhalb des Bereichs [0-%d]\n" + +#: utils/cpupower-set.c:121 +#, c-format +msgid "Error setting sched-mc %s\n" +msgstr "Fehler beim Einstellen von sched-mc %s\n" + +#: utils/cpupower-set.c:127 +#, c-format +msgid "Error setting sched-smt %s\n" +msgstr "Fehler beim Einstellen von sched-smt %s\n" + +#: utils/cpupower-set.c:146 +#, c-format +msgid "Error setting perf-bias value on CPU %d\n" +msgstr "Fehler beim Einstellen des perf-bias-Wertes auf der CPU %d\n" + +#: utils/cpupower-info.c:21 +#, c-format +msgid "Usage: cpupower info [ -b ] [ -m ] [ -s ]\n" +msgstr "Aufruf: cpupower info [ -b ] [ -m ] [ -s ]\n" + +#: utils/cpupower-info.c:23 +#, c-format +msgid "" +" -b, --perf-bias Gets CPU's power vs performance policy on some\n" +" Intel models [0-15], see manpage for details\n" +msgstr "" + +#: utils/cpupower-info.c:25 +#, c-format +msgid " -m, --sched-mc Gets the kernel's multi core scheduler policy.\n" +msgstr "" +" -m, --sched-mc Ruft die Mehrkern-Scheduler-Richtlinie des Kernels ab.\n" + +#: utils/cpupower-info.c:26 +#, c-format +msgid "" +" -s, --sched-smt Gets the kernel's thread sibling scheduler policy.\n" +msgstr "" + +#: utils/cpupower-info.c:28 +#, c-format +msgid "" +"\n" +"Passing no option will show all info, by default only on core 0\n" +msgstr "" +"\n" +"Wenn Sie keine Option übergeben, werden alle Informationen angezeigt, " +"standardmäßig nur auf Kern 0\n" + +#: utils/cpupower-info.c:102 +#, c-format +msgid "System's multi core scheduler setting: " +msgstr "Mehrkern-Scheduler-Einstellung des Systems: " + +#. if sysfs file is missing it's: errno == ENOENT +#: utils/cpupower-info.c:105 utils/cpupower-info.c:114 +#, c-format +msgid "not supported\n" +msgstr "nicht unterstützt\n" + +#: utils/cpupower-info.c:111 +#, c-format +msgid "System's thread sibling scheduler setting: " +msgstr "" + +#: utils/cpupower-info.c:126 +#, c-format +msgid "Intel's performance bias setting needs root privileges\n" +msgstr "" + +#: utils/cpupower-info.c:128 +#, c-format +msgid "System does not support Intel's performance bias setting\n" +msgstr "" + +#: utils/cpupower-info.c:147 +#, c-format +msgid "Could not read perf-bias value\n" +msgstr "perf-bias-Wert konnte nicht gelesen werden\n" + +#: utils/cpupower-info.c:150 +#, c-format +msgid "perf-bias: %d\n" +msgstr "perf-bias: %d\n" + +#: utils/cpuidle-info.c:28 +#, c-format +msgid "Analyzing CPU %d:\n" +msgstr "CPU %d wird analysiert:\n" + +#: utils/cpuidle-info.c:32 +#, c-format +msgid "CPU %u: No idle states\n" +msgstr "CPU %u: Keine Ruhezustände\n" + +#: utils/cpuidle-info.c:36 +#, c-format +msgid "CPU %u: Can't read idle state info\n" +msgstr "CPU %u: Ruhezustands-Informationen können nicht gelesen werden\n" + +#: utils/cpuidle-info.c:41 +#, c-format +msgid "Could not determine max idle state %u\n" +msgstr "Max. Ruhezustand %u konnte nicht bestimmt werden\n" + +#: utils/cpuidle-info.c:46 +#, c-format +msgid "Number of idle states: %d\n" +msgstr "Anzahl der Ruhezustände: %d\n" + +#: utils/cpuidle-info.c:48 +#, c-format +msgid "Available idle states:" +msgstr "Verfügbare Ruhezustände:" + +#: utils/cpuidle-info.c:71 +#, c-format +msgid "Flags/Description: %s\n" +msgstr "Merker/Beschreibung: %s\n" + +#: utils/cpuidle-info.c:74 +#, c-format +msgid "Latency: %lu\n" +msgstr "Latenz: %lu\n" + +#: utils/cpuidle-info.c:76 +#, c-format +msgid "Usage: %lu\n" +msgstr "Aufruf: %lu\n" + +#: utils/cpuidle-info.c:78 +#, c-format +msgid "Duration: %llu\n" +msgstr "Dauer: %llu\n" + +#: utils/cpuidle-info.c:90 +#, c-format +msgid "Could not determine cpuidle driver\n" +msgstr "cpuidle-Treiber konnte nicht bestimmt werden\n" + +#: utils/cpuidle-info.c:94 +#, c-format +msgid "CPUidle driver: %s\n" +msgstr "CPUidle-Treiber: %s\n" + +#: utils/cpuidle-info.c:99 +#, c-format +msgid "Could not determine cpuidle governor\n" +msgstr "cpuidle-Regler konnte nicht bestimmt werden\n" + +#: utils/cpuidle-info.c:103 +#, c-format +msgid "CPUidle governor: %s\n" +msgstr "CPUidle-Regler: %s\n" + +#: utils/cpuidle-info.c:122 +#, c-format +msgid "CPU %u: Can't read C-state info\n" +msgstr "CPU %u: C-Zustands-Informationen können nicht gelesen werden\n" + +#. printf("Cstates: %d\n", cstates); +#: utils/cpuidle-info.c:127 +#, c-format +msgid "active state: C0\n" +msgstr "aktiver Zustand: C0\n" + +#: utils/cpuidle-info.c:128 +#, c-format +msgid "max_cstate: C%u\n" +msgstr "max_cstate: C%u\n" + +#: utils/cpuidle-info.c:129 +#, c-format +msgid "maximum allowed latency: %lu usec\n" +msgstr "maximal erlaubte Latenz: %lu usec\n" + +#: utils/cpuidle-info.c:130 +#, c-format +msgid "states:\t\n" +msgstr "Zustände:\t\n" + +#: utils/cpuidle-info.c:132 +#, c-format +msgid " C%d: type[C%d] " +msgstr " C%d: Typ[C%d] " + +#: utils/cpuidle-info.c:134 +#, c-format +msgid "promotion[--] demotion[--] " +msgstr "promotion[--] demotion[--] " + +#: utils/cpuidle-info.c:135 +#, c-format +msgid "latency[%03lu] " +msgstr "Latenz[%03lu] " + +#: utils/cpuidle-info.c:137 +#, c-format +msgid "usage[%08lu] " +msgstr "Aufruf[%08lu] " + +#: utils/cpuidle-info.c:139 +#, c-format +msgid "duration[%020Lu] \n" +msgstr "Dauer[%020Lu] \n" + +#: utils/cpuidle-info.c:147 +#, c-format +msgid "Usage: cpupower idleinfo [options]\n" +msgstr "Aufruf: cpupower idleinfo [Optionen]\n" + +#: utils/cpuidle-info.c:149 +#, c-format +msgid " -s, --silent Only show general C-state information\n" +msgstr "" +" -s, --silent Nur allgemeine C-Zustands-Informationen anzeigen\n" + +#: utils/cpuidle-info.c:150 +#, c-format +msgid "" +" -o, --proc Prints out information like provided by the " +"/proc/acpi/processor/*/power\n" +" interface in older kernels\n" +msgstr "" +" -o, --proc Gibt Informationen so aus, wie sie von der " +"Schnittstelle\n" +" /proc/acpi/processor/*/power in älteren Kerneln " +"bereitgestellt werden\n" + +#: utils/cpuidle-info.c:209 +#, c-format +msgid "You can't specify more than one output-specific argument\n" +msgstr "Sie können nicht mehr als ein ausgabenspezifisches Argument angeben\n" + +#~ msgid "" +#~ " -c CPU, --cpu CPU CPU number which information shall be determined " +#~ "about\n" +#~ msgstr "" +#~ " -c CPU, --cpu CPU Nummer der CPU, über die Informationen " +#~ "herausgefunden werden sollen\n" + +#~ msgid "" +#~ " -c CPU, --cpu CPU number of CPU where cpufreq settings shall be " +#~ "modified\n" +#~ msgstr "" +#~ " -c CPU, --cpu CPU Nummer der CPU, deren " +#~ "Taktfrequenz-Einstellung\n" +#~ " werden soll\n" diff --git a/tools/power/cpupower/po/fr.po b/tools/power/cpupower/po/fr.po new file mode 100644 index 000000000..b6e505b34 --- /dev/null +++ b/tools/power/cpupower/po/fr.po @@ -0,0 +1,947 @@ +# French translations for cpufrequtils package +# Copyright (C) 2004 THE PACKAGE'S COPYRIGHT HOLDER +# This file is distributed under the same license as the cpufrequtils package. +# Ducrot Bruno <ducrot@poupinou.org>, 2004. +# +#, fuzzy +msgid "" +msgstr "" +"Project-Id-Version: cpufrequtils 0.1-pre2\n" +"Report-Msgid-Bugs-To: \n" +"POT-Creation-Date: 2011-03-08 17:03+0100\n" +"PO-Revision-Date: 2004-11-17 15:53+1000\n" +"Last-Translator: Bruno Ducrot <ducrot@poupinou.org>\n" +"Language-Team: NONE\n" +"Language: \n" +"MIME-Version: 1.0\n" +"Content-Type: text/plain; charset=ISO-8859-1\n" +"Content-Transfer-Encoding: 8bit\n" + +#: utils/idle_monitor/nhm_idle.c:36 +msgid "Processor Core C3" +msgstr "" + +#: utils/idle_monitor/nhm_idle.c:43 +msgid "Processor Core C6" +msgstr "" + +#: utils/idle_monitor/nhm_idle.c:51 +msgid "Processor Package C3" +msgstr "" + +#: utils/idle_monitor/nhm_idle.c:58 utils/idle_monitor/amd_fam14h_idle.c:70 +msgid "Processor Package C6" +msgstr "" + +#: utils/idle_monitor/snb_idle.c:33 +msgid "Processor Core C7" +msgstr "" + +#: utils/idle_monitor/snb_idle.c:40 +msgid "Processor Package C2" +msgstr "" + +#: utils/idle_monitor/snb_idle.c:47 +msgid "Processor Package C7" +msgstr "" + +#: utils/idle_monitor/amd_fam14h_idle.c:56 +msgid "Package in sleep state (PC1 or deeper)" +msgstr "" + +#: utils/idle_monitor/amd_fam14h_idle.c:63 +msgid "Processor Package C1" +msgstr "" + +#: utils/idle_monitor/amd_fam14h_idle.c:77 +msgid "North Bridge P1 boolean counter (returns 0 or 1)" +msgstr "" + +#: utils/idle_monitor/mperf_monitor.c:35 +msgid "Processor Core not idle" +msgstr "" + +#: utils/idle_monitor/mperf_monitor.c:42 +msgid "Processor Core in an idle state" +msgstr "" + +#: utils/idle_monitor/mperf_monitor.c:50 +msgid "Average Frequency (including boost) in MHz" +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:66 +#, c-format +msgid "" +"cpupower monitor: [-h] [ [-t] | [-l] | [-m <mon1>,[<mon2>] ] ] [-i " +"interval_sec | -c command ...]\n" +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:69 +#, c-format +msgid "" +"cpupower monitor: [-v] [-h] [ [-t] | [-l] | [-m <mon1>,[<mon2>] ] ] [-i " +"interval_sec | -c command ...]\n" +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:71 +#, c-format +msgid "\t -v: be more verbose\n" +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:73 +#, c-format +msgid "\t -h: print this help\n" +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:74 +#, c-format +msgid "\t -i: time interval to measure for in seconds (default 1)\n" +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:75 +#, c-format +msgid "\t -t: show CPU topology/hierarchy\n" +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:76 +#, c-format +msgid "\t -l: list available CPU sleep monitors (for use with -m)\n" +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:77 +#, c-format +msgid "\t -m: show specific CPU sleep monitors only (in same order)\n" +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:79 +#, c-format +msgid "" +"only one of: -t, -l, -m are allowed\n" +"If none of them is passed," +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:80 +#, c-format +msgid " all supported monitors are shown\n" +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:197 +#, c-format +msgid "Monitor %s, Counter %s has no count function. Implementation error\n" +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:207 +#, c-format +msgid " *is offline\n" +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:236 +#, c-format +msgid "%s: max monitor name length (%d) exceeded\n" +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:250 +#, c-format +msgid "No matching monitor found in %s, try -l option\n" +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:266 +#, c-format +msgid "Monitor \"%s\" (%d states) - Might overflow after %u s\n" +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:319 +#, c-format +msgid "%s took %.5f seconds and exited with status %d\n" +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:406 +#, c-format +msgid "Cannot read number of available processors\n" +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:417 +#, c-format +msgid "Available monitor %s needs root access\n" +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:428 +#, c-format +msgid "No HW Cstate monitors found\n" +msgstr "" + +#: utils/cpupower.c:78 +#, c-format +msgid "cpupower [ -c cpulist ] subcommand [ARGS]\n" +msgstr "" + +#: utils/cpupower.c:79 +#, c-format +msgid "cpupower --version\n" +msgstr "" + +#: utils/cpupower.c:80 +#, c-format +msgid "Supported subcommands are:\n" +msgstr "" + +#: utils/cpupower.c:83 +#, c-format +msgid "" +"\n" +"Some subcommands can make use of the -c cpulist option.\n" +msgstr "" + +#: utils/cpupower.c:84 +#, c-format +msgid "Look at the general cpupower manpage how to use it\n" +msgstr "" + +#: utils/cpupower.c:85 +#, c-format +msgid "and read up the subcommand's manpage whether it is supported.\n" +msgstr "" + +#: utils/cpupower.c:86 +#, c-format +msgid "" +"\n" +"Use cpupower help subcommand for getting help for above subcommands.\n" +msgstr "" + +#: utils/cpupower.c:91 +#, c-format +msgid "Report errors and bugs to %s, please.\n" +msgstr "Veuillez rapportez les erreurs et les bogues à %s, s'il vous plait.\n" + +#: utils/cpupower.c:114 +#, c-format +msgid "Error parsing cpu list\n" +msgstr "" + +#: utils/cpupower.c:172 +#, c-format +msgid "Subcommand %s needs root privileges\n" +msgstr "" + +#: utils/cpufreq-info.c:31 +#, c-format +msgid "Couldn't count the number of CPUs (%s: %s), assuming 1\n" +msgstr "Détermination du nombre de CPUs (%s : %s) impossible. Assume 1\n" + +#: utils/cpufreq-info.c:63 +#, c-format +msgid "" +" minimum CPU frequency - maximum CPU frequency - governor\n" +msgstr "" +" Fréquence CPU minimale - Fréquence CPU maximale - régulateur\n" + +#: utils/cpufreq-info.c:151 +#, c-format +msgid "Error while evaluating Boost Capabilities on CPU %d -- are you root?\n" +msgstr "" + +#. P state changes via MSR are identified via cpuid 80000007 +#. on Intel and AMD, but we assume boost capable machines can do that +#. if (cpuid_eax(0x80000000) >= 0x80000007 +#. && (cpuid_edx(0x80000007) & (1 << 7))) +#. +#: utils/cpufreq-info.c:161 +#, c-format +msgid " boost state support: \n" +msgstr "" + +#: utils/cpufreq-info.c:163 +#, c-format +msgid " Supported: %s\n" +msgstr "" + +#: utils/cpufreq-info.c:163 utils/cpufreq-info.c:164 +msgid "yes" +msgstr "" + +#: utils/cpufreq-info.c:163 utils/cpufreq-info.c:164 +msgid "no" +msgstr "" + +#: utils/cpufreq-info.c:164 +#, fuzzy, c-format +msgid " Active: %s\n" +msgstr " pilote : %s\n" + +#: utils/cpufreq-info.c:177 +#, c-format +msgid " Boost States: %d\n" +msgstr "" + +#: utils/cpufreq-info.c:178 +#, c-format +msgid " Total States: %d\n" +msgstr "" + +#: utils/cpufreq-info.c:181 +#, c-format +msgid " Pstate-Pb%d: %luMHz (boost state)\n" +msgstr "" + +#: utils/cpufreq-info.c:184 +#, c-format +msgid " Pstate-P%d: %luMHz\n" +msgstr "" + +#: utils/cpufreq-info.c:211 +#, c-format +msgid " no or unknown cpufreq driver is active on this CPU\n" +msgstr " pas de pilotes cpufreq reconnu pour ce CPU\n" + +#: utils/cpufreq-info.c:213 +#, c-format +msgid " driver: %s\n" +msgstr " pilote : %s\n" + +#: utils/cpufreq-info.c:219 +#, fuzzy, c-format +msgid " CPUs which run at the same hardware frequency: " +msgstr " CPUs qui doivent changer de fréquences en même temps : " + +#: utils/cpufreq-info.c:230 +#, fuzzy, c-format +msgid " CPUs which need to have their frequency coordinated by software: " +msgstr " CPUs qui doivent changer de fréquences en même temps : " + +#: utils/cpufreq-info.c:241 +#, c-format +msgid " maximum transition latency: " +msgstr "" + +#: utils/cpufreq-info.c:247 +#, c-format +msgid " hardware limits: " +msgstr " limitation matérielle : " + +#: utils/cpufreq-info.c:256 +#, c-format +msgid " available frequency steps: " +msgstr " plage de fréquence : " + +#: utils/cpufreq-info.c:269 +#, c-format +msgid " available cpufreq governors: " +msgstr " régulateurs disponibles : " + +#: utils/cpufreq-info.c:280 +#, c-format +msgid " current policy: frequency should be within " +msgstr " tactique actuelle : la fréquence doit être comprise entre " + +#: utils/cpufreq-info.c:282 +#, c-format +msgid " and " +msgstr " et " + +#: utils/cpufreq-info.c:286 +#, c-format +msgid "" +"The governor \"%s\" may decide which speed to use\n" +" within this range.\n" +msgstr "" +"Le régulateur \"%s\" est libre de choisir la vitesse\n" +" dans cette plage de fréquences.\n" + +#: utils/cpufreq-info.c:293 +#, c-format +msgid " current CPU frequency is " +msgstr " la fréquence actuelle de ce CPU est " + +#: utils/cpufreq-info.c:296 +#, c-format +msgid " (asserted by call to hardware)" +msgstr " (vérifié par un appel direct du matériel)" + +#: utils/cpufreq-info.c:304 +#, c-format +msgid " cpufreq stats: " +msgstr " des statistique concernant cpufreq:" + +#: utils/cpufreq-info.c:472 +#, fuzzy, c-format +msgid "Usage: cpupower freqinfo [options]\n" +msgstr "Usage : cpufreq-info [options]\n" + +#: utils/cpufreq-info.c:473 utils/cpufreq-set.c:26 utils/cpupower-set.c:23 +#: utils/cpupower-info.c:22 utils/cpuidle-info.c:148 +#, c-format +msgid "Options:\n" +msgstr "Options :\n" + +#: utils/cpufreq-info.c:474 +#, fuzzy, c-format +msgid " -e, --debug Prints out debug information [default]\n" +msgstr " -e, --debug Afficher les informations de déboguage\n" + +#: utils/cpufreq-info.c:475 +#, c-format +msgid "" +" -f, --freq Get frequency the CPU currently runs at, according\n" +" to the cpufreq core *\n" +msgstr "" +" -f, --freq Obtenir la fréquence actuelle du CPU selon le point\n" +" de vue du coeur du système de cpufreq *\n" + +#: utils/cpufreq-info.c:477 +#, c-format +msgid "" +" -w, --hwfreq Get frequency the CPU currently runs at, by reading\n" +" it from hardware (only available to root) *\n" +msgstr "" +" -w, --hwfreq Obtenir la fréquence actuelle du CPU directement par\n" +" le matériel (doit être root) *\n" + +#: utils/cpufreq-info.c:479 +#, c-format +msgid "" +" -l, --hwlimits Determine the minimum and maximum CPU frequency " +"allowed *\n" +msgstr "" +" -l, --hwlimits Affiche les fréquences minimales et maximales du CPU " +"*\n" + +#: utils/cpufreq-info.c:480 +#, c-format +msgid " -d, --driver Determines the used cpufreq kernel driver *\n" +msgstr " -d, --driver Affiche le pilote cpufreq utilisé *\n" + +#: utils/cpufreq-info.c:481 +#, c-format +msgid " -p, --policy Gets the currently used cpufreq policy *\n" +msgstr " -p, --policy Affiche la tactique actuelle de cpufreq *\n" + +#: utils/cpufreq-info.c:482 +#, c-format +msgid " -g, --governors Determines available cpufreq governors *\n" +msgstr "" +" -g, --governors Affiche les régulateurs disponibles de cpufreq *\n" + +#: utils/cpufreq-info.c:483 +#, fuzzy, c-format +msgid "" +" -r, --related-cpus Determines which CPUs run at the same hardware " +"frequency *\n" +msgstr "" +" -a, --affected-cpus Affiche quels sont les CPUs qui doivent changer de\n" +" fréquences en même temps *\n" + +#: utils/cpufreq-info.c:484 +#, fuzzy, c-format +msgid "" +" -a, --affected-cpus Determines which CPUs need to have their frequency\n" +" coordinated by software *\n" +msgstr "" +" -a, --affected-cpus Affiche quels sont les CPUs qui doivent changer de\n" +" fréquences en même temps *\n" + +#: utils/cpufreq-info.c:486 +#, c-format +msgid " -s, --stats Shows cpufreq statistics if available\n" +msgstr "" +" -s, --stats Indique des statistiques concernant cpufreq, si\n" +" disponibles\n" + +#: utils/cpufreq-info.c:487 +#, fuzzy, c-format +msgid "" +" -y, --latency Determines the maximum latency on CPU frequency " +"changes *\n" +msgstr "" +" -l, --hwlimits Affiche les fréquences minimales et maximales du CPU " +"*\n" + +#: utils/cpufreq-info.c:488 +#, c-format +msgid " -b, --boost Checks for turbo or boost modes *\n" +msgstr "" + +#: utils/cpufreq-info.c:489 +#, c-format +msgid "" +" -o, --proc Prints out information like provided by the /proc/" +"cpufreq\n" +" interface in 2.4. and early 2.6. kernels\n" +msgstr "" +" -o, --proc Affiche les informations en utilisant l'interface\n" +" fournie par /proc/cpufreq, présente dans les " +"versions\n" +" 2.4 et les anciennes versions 2.6 du noyau\n" + +#: utils/cpufreq-info.c:491 +#, fuzzy, c-format +msgid "" +" -m, --human human-readable output for the -f, -w, -s and -y " +"parameters\n" +msgstr "" +" -m, --human affiche dans un format lisible pour un humain\n" +" pour les options -f, -w et -s (MHz, GHz)\n" + +#: utils/cpufreq-info.c:492 utils/cpuidle-info.c:152 +#, c-format +msgid " -h, --help Prints out this screen\n" +msgstr " -h, --help affiche l'aide-mémoire\n" + +#: utils/cpufreq-info.c:495 +#, c-format +msgid "" +"If no argument or only the -c, --cpu parameter is given, debug output about\n" +"cpufreq is printed which is useful e.g. for reporting bugs.\n" +msgstr "" +"Par défaut, les informations de déboguage seront affichées si aucun\n" +"argument, ou bien si seulement l'argument -c (--cpu) est donné, afin de\n" +"faciliter les rapports de bogues par exemple\n" + +#: utils/cpufreq-info.c:497 +#, c-format +msgid "" +"For the arguments marked with *, omitting the -c or --cpu argument is\n" +"equivalent to setting it to zero\n" +msgstr "Les arguments avec un * utiliseront le CPU 0 si -c (--cpu) est omis\n" + +#: utils/cpufreq-info.c:580 +#, c-format +msgid "" +"The argument passed to this tool can't be combined with passing a --cpu " +"argument\n" +msgstr "Cette option est incompatible avec --cpu\n" + +#: utils/cpufreq-info.c:596 +#, c-format +msgid "" +"You can't specify more than one --cpu parameter and/or\n" +"more than one output-specific argument\n" +msgstr "" +"On ne peut indiquer plus d'un paramètre --cpu, tout comme l'on ne peut\n" +"spécifier plus d'un argument de formatage\n" + +#: utils/cpufreq-info.c:600 utils/cpufreq-set.c:82 utils/cpupower-set.c:42 +#: utils/cpupower-info.c:42 utils/cpuidle-info.c:213 +#, c-format +msgid "invalid or unknown argument\n" +msgstr "option invalide\n" + +#: utils/cpufreq-info.c:617 +#, c-format +msgid "couldn't analyze CPU %d as it doesn't seem to be present\n" +msgstr "analyse du CPU %d impossible puisqu'il ne semble pas être présent\n" + +#: utils/cpufreq-info.c:620 utils/cpupower-info.c:142 +#, c-format +msgid "analyzing CPU %d:\n" +msgstr "analyse du CPU %d :\n" + +#: utils/cpufreq-set.c:25 +#, fuzzy, c-format +msgid "Usage: cpupower frequency-set [options]\n" +msgstr "Usage : cpufreq-set [options]\n" + +#: utils/cpufreq-set.c:27 +#, c-format +msgid "" +" -d FREQ, --min FREQ new minimum CPU frequency the governor may " +"select\n" +msgstr "" +" -d FREQ, --min FREQ nouvelle fréquence minimale du CPU à utiliser\n" +" par le régulateur\n" + +#: utils/cpufreq-set.c:28 +#, c-format +msgid "" +" -u FREQ, --max FREQ new maximum CPU frequency the governor may " +"select\n" +msgstr "" +" -u FREQ, --max FREQ nouvelle fréquence maximale du CPU à utiliser\n" +" par le régulateur\n" + +#: utils/cpufreq-set.c:29 +#, c-format +msgid " -g GOV, --governor GOV new cpufreq governor\n" +msgstr " -g GOV, --governor GOV active le régulateur GOV\n" + +#: utils/cpufreq-set.c:30 +#, c-format +msgid "" +" -f FREQ, --freq FREQ specific frequency to be set. Requires userspace\n" +" governor to be available and loaded\n" +msgstr "" +" -f FREQ, --freq FREQ fixe la fréquence du processeur à FREQ. Il faut\n" +" que le régulateur « userspace » soit disponible \n" +" et activé.\n" + +#: utils/cpufreq-set.c:32 +#, c-format +msgid " -r, --related Switches all hardware-related CPUs\n" +msgstr "" + +#: utils/cpufreq-set.c:33 utils/cpupower-set.c:28 utils/cpupower-info.c:27 +#, fuzzy, c-format +msgid " -h, --help Prints out this screen\n" +msgstr " -h, --help affiche l'aide-mémoire\n" + +#: utils/cpufreq-set.c:35 +#, fuzzy, c-format +msgid "" +"Notes:\n" +"1. Omitting the -c or --cpu argument is equivalent to setting it to \"all\"\n" +msgstr "Les arguments avec un * utiliseront le CPU 0 si -c (--cpu) est omis\n" + +#: utils/cpufreq-set.c:37 +#, fuzzy, c-format +msgid "" +"2. The -f FREQ, --freq FREQ parameter cannot be combined with any other " +"parameter\n" +" except the -c CPU, --cpu CPU parameter\n" +"3. FREQuencies can be passed in Hz, kHz (default), MHz, GHz, or THz\n" +" by postfixing the value with the wanted unit name, without any space\n" +" (FREQuency in kHz =^ Hz * 0.001 =^ MHz * 1000 =^ GHz * 1000000).\n" +msgstr "" +"Remarque :\n" +"1. Le CPU numéro 0 sera utilisé par défaut si -c (ou --cpu) est omis ;\n" +"2. l'argument -f FREQ (ou --freq FREQ) ne peut être utilisé qu'avec --cpu ;\n" +"3. on pourra préciser l'unité des fréquences en postfixant sans aucune " +"espace\n" +" les valeurs par hz, kHz (par défaut), MHz, GHz ou THz\n" +" (kHz =^ Hz * 0.001 =^ MHz * 1000 =^ GHz * 1000000).\n" + +#: utils/cpufreq-set.c:57 +#, c-format +msgid "" +"Error setting new values. Common errors:\n" +"- Do you have proper administration rights? (super-user?)\n" +"- Is the governor you requested available and modprobed?\n" +"- Trying to set an invalid policy?\n" +"- Trying to set a specific frequency, but userspace governor is not " +"available,\n" +" for example because of hardware which cannot be set to a specific " +"frequency\n" +" or because the userspace governor isn't loaded?\n" +msgstr "" +"En ajustant les nouveaux paramètres, une erreur est apparue. Les sources\n" +"d'erreur typique sont :\n" +"- droit d'administration insuffisant (êtes-vous root ?) ;\n" +"- le régulateur choisi n'est pas disponible, ou bien n'est pas disponible " +"en\n" +" tant que module noyau ;\n" +"- la tactique n'est pas disponible ;\n" +"- vous voulez utiliser l'option -f/--freq, mais le régulateur « userspace »\n" +" n'est pas disponible, par exemple parce que le matériel ne le supporte\n" +" pas, ou bien n'est tout simplement pas chargé.\n" + +#: utils/cpufreq-set.c:170 +#, c-format +msgid "wrong, unknown or unhandled CPU?\n" +msgstr "CPU inconnu ou non supporté ?\n" + +#: utils/cpufreq-set.c:302 +#, c-format +msgid "" +"the -f/--freq parameter cannot be combined with -d/--min, -u/--max or\n" +"-g/--governor parameters\n" +msgstr "" +"l'option -f/--freq est incompatible avec les options -d/--min, -u/--max et\n" +"-g/--governor\n" + +#: utils/cpufreq-set.c:308 +#, c-format +msgid "" +"At least one parameter out of -f/--freq, -d/--min, -u/--max, and\n" +"-g/--governor must be passed\n" +msgstr "" +"L'un de ces paramètres est obligatoire : -f/--freq, -d/--min, -u/--max et\n" +"-g/--governor\n" + +#: utils/cpufreq-set.c:347 +#, c-format +msgid "Setting cpu: %d\n" +msgstr "" + +#: utils/cpupower-set.c:22 +#, c-format +msgid "Usage: cpupower set [ -b val ] [ -m val ] [ -s val ]\n" +msgstr "" + +#: utils/cpupower-set.c:24 +#, c-format +msgid "" +" -b, --perf-bias [VAL] Sets CPU's power vs performance policy on some\n" +" Intel models [0-15], see manpage for details\n" +msgstr "" + +#: utils/cpupower-set.c:26 +#, c-format +msgid "" +" -m, --sched-mc [VAL] Sets the kernel's multi core scheduler policy.\n" +msgstr "" + +#: utils/cpupower-set.c:27 +#, c-format +msgid "" +" -s, --sched-smt [VAL] Sets the kernel's thread sibling scheduler " +"policy.\n" +msgstr "" + +#: utils/cpupower-set.c:80 +#, c-format +msgid "--perf-bias param out of range [0-%d]\n" +msgstr "" + +#: utils/cpupower-set.c:91 +#, c-format +msgid "--sched-mc param out of range [0-%d]\n" +msgstr "" + +#: utils/cpupower-set.c:102 +#, c-format +msgid "--sched-smt param out of range [0-%d]\n" +msgstr "" + +#: utils/cpupower-set.c:121 +#, c-format +msgid "Error setting sched-mc %s\n" +msgstr "" + +#: utils/cpupower-set.c:127 +#, c-format +msgid "Error setting sched-smt %s\n" +msgstr "" + +#: utils/cpupower-set.c:146 +#, c-format +msgid "Error setting perf-bias value on CPU %d\n" +msgstr "" + +#: utils/cpupower-info.c:21 +#, c-format +msgid "Usage: cpupower info [ -b ] [ -m ] [ -s ]\n" +msgstr "" + +#: utils/cpupower-info.c:23 +#, c-format +msgid "" +" -b, --perf-bias Gets CPU's power vs performance policy on some\n" +" Intel models [0-15], see manpage for details\n" +msgstr "" + +#: utils/cpupower-info.c:25 +#, fuzzy, c-format +msgid " -m, --sched-mc Gets the kernel's multi core scheduler policy.\n" +msgstr " -p, --policy Affiche la tactique actuelle de cpufreq *\n" + +#: utils/cpupower-info.c:26 +#, c-format +msgid "" +" -s, --sched-smt Gets the kernel's thread sibling scheduler policy.\n" +msgstr "" + +#: utils/cpupower-info.c:28 +#, c-format +msgid "" +"\n" +"Passing no option will show all info, by default only on core 0\n" +msgstr "" + +#: utils/cpupower-info.c:102 +#, c-format +msgid "System's multi core scheduler setting: " +msgstr "" + +#. if sysfs file is missing it's: errno == ENOENT +#: utils/cpupower-info.c:105 utils/cpupower-info.c:114 +#, c-format +msgid "not supported\n" +msgstr "" + +#: utils/cpupower-info.c:111 +#, c-format +msgid "System's thread sibling scheduler setting: " +msgstr "" + +#: utils/cpupower-info.c:126 +#, c-format +msgid "Intel's performance bias setting needs root privileges\n" +msgstr "" + +#: utils/cpupower-info.c:128 +#, c-format +msgid "System does not support Intel's performance bias setting\n" +msgstr "" + +#: utils/cpupower-info.c:147 +#, c-format +msgid "Could not read perf-bias value\n" +msgstr "" + +#: utils/cpupower-info.c:150 +#, c-format +msgid "perf-bias: %d\n" +msgstr "" + +#: utils/cpuidle-info.c:28 +#, fuzzy, c-format +msgid "Analyzing CPU %d:\n" +msgstr "analyse du CPU %d :\n" + +#: utils/cpuidle-info.c:32 +#, c-format +msgid "CPU %u: No idle states\n" +msgstr "" + +#: utils/cpuidle-info.c:36 +#, c-format +msgid "CPU %u: Can't read idle state info\n" +msgstr "" + +#: utils/cpuidle-info.c:41 +#, c-format +msgid "Could not determine max idle state %u\n" +msgstr "" + +#: utils/cpuidle-info.c:46 +#, c-format +msgid "Number of idle states: %d\n" +msgstr "" + +#: utils/cpuidle-info.c:48 +#, fuzzy, c-format +msgid "Available idle states:" +msgstr " plage de fréquence : " + +#: utils/cpuidle-info.c:71 +#, c-format +msgid "Flags/Description: %s\n" +msgstr "" + +#: utils/cpuidle-info.c:74 +#, c-format +msgid "Latency: %lu\n" +msgstr "" + +#: utils/cpuidle-info.c:76 +#, c-format +msgid "Usage: %lu\n" +msgstr "" + +#: utils/cpuidle-info.c:78 +#, c-format +msgid "Duration: %llu\n" +msgstr "" + +#: utils/cpuidle-info.c:90 +#, c-format +msgid "Could not determine cpuidle driver\n" +msgstr "" + +#: utils/cpuidle-info.c:94 +#, fuzzy, c-format +msgid "CPUidle driver: %s\n" +msgstr " pilote : %s\n" + +#: utils/cpuidle-info.c:99 +#, c-format +msgid "Could not determine cpuidle governor\n" +msgstr "" + +#: utils/cpuidle-info.c:103 +#, c-format +msgid "CPUidle governor: %s\n" +msgstr "" + +#: utils/cpuidle-info.c:122 +#, c-format +msgid "CPU %u: Can't read C-state info\n" +msgstr "" + +#. printf("Cstates: %d\n", cstates); +#: utils/cpuidle-info.c:127 +#, c-format +msgid "active state: C0\n" +msgstr "" + +#: utils/cpuidle-info.c:128 +#, c-format +msgid "max_cstate: C%u\n" +msgstr "" + +#: utils/cpuidle-info.c:129 +#, c-format +msgid "maximum allowed latency: %lu usec\n" +msgstr "" + +#: utils/cpuidle-info.c:130 +#, c-format +msgid "states:\t\n" +msgstr "" + +#: utils/cpuidle-info.c:132 +#, c-format +msgid " C%d: type[C%d] " +msgstr "" + +#: utils/cpuidle-info.c:134 +#, c-format +msgid "promotion[--] demotion[--] " +msgstr "" + +#: utils/cpuidle-info.c:135 +#, c-format +msgid "latency[%03lu] " +msgstr "" + +#: utils/cpuidle-info.c:137 +#, c-format +msgid "usage[%08lu] " +msgstr "" + +#: utils/cpuidle-info.c:139 +#, c-format +msgid "duration[%020Lu] \n" +msgstr "" + +#: utils/cpuidle-info.c:147 +#, fuzzy, c-format +msgid "Usage: cpupower idleinfo [options]\n" +msgstr "Usage : cpufreq-info [options]\n" + +#: utils/cpuidle-info.c:149 +#, fuzzy, c-format +msgid " -s, --silent Only show general C-state information\n" +msgstr " -e, --debug Afficher les informations de déboguage\n" + +#: utils/cpuidle-info.c:150 +#, fuzzy, c-format +msgid "" +" -o, --proc Prints out information like provided by the /proc/" +"acpi/processor/*/power\n" +" interface in older kernels\n" +msgstr "" +" -o, --proc Affiche les informations en utilisant l'interface\n" +" fournie par /proc/cpufreq, présente dans les " +"versions\n" +" 2.4 et les anciennes versions 2.6 du noyau\n" + +#: utils/cpuidle-info.c:209 +#, fuzzy, c-format +msgid "You can't specify more than one output-specific argument\n" +msgstr "" +"On ne peut indiquer plus d'un paramètre --cpu, tout comme l'on ne peut\n" +"spécifier plus d'un argument de formatage\n" + +#~ msgid "" +#~ " -c CPU, --cpu CPU CPU number which information shall be determined " +#~ "about\n" +#~ msgstr "" +#~ " -c CPU, --cpu CPU Numéro du CPU pour lequel l'information sera " +#~ "affichée\n" + +#~ msgid "" +#~ " -c CPU, --cpu CPU number of CPU where cpufreq settings shall be " +#~ "modified\n" +#~ msgstr "" +#~ " -c CPU, --cpu CPU numéro du CPU à prendre en compte pour les\n" +#~ " changements\n" diff --git a/tools/power/cpupower/po/it.po b/tools/power/cpupower/po/it.po new file mode 100644 index 000000000..a1deeb52c --- /dev/null +++ b/tools/power/cpupower/po/it.po @@ -0,0 +1,961 @@ +# Italian translations for cpufrequtils package +# Copyright (C) 2004-2009 +# This file is distributed under the same license as the cpufrequtils package. +# Mattia Dongili <malattia@gmail.com>. +# +# +msgid "" +msgstr "" +"Project-Id-Version: cpufrequtils 0.3\n" +"Report-Msgid-Bugs-To: \n" +"POT-Creation-Date: 2011-03-08 17:03+0100\n" +"PO-Revision-Date: 2009-08-15 12:00+0900\n" +"Last-Translator: Mattia Dongili <malattia@gmail.com>\n" +"Language-Team: NONE\n" +"Language: \n" +"MIME-Version: 1.0\n" +"Content-Type: text/plain; charset=UTF-8\n" +"Content-Transfer-Encoding: 8bit\n" + +#: utils/idle_monitor/nhm_idle.c:36 +msgid "Processor Core C3" +msgstr "" + +#: utils/idle_monitor/nhm_idle.c:43 +msgid "Processor Core C6" +msgstr "" + +#: utils/idle_monitor/nhm_idle.c:51 +msgid "Processor Package C3" +msgstr "" + +#: utils/idle_monitor/nhm_idle.c:58 utils/idle_monitor/amd_fam14h_idle.c:70 +msgid "Processor Package C6" +msgstr "" + +#: utils/idle_monitor/snb_idle.c:33 +msgid "Processor Core C7" +msgstr "" + +#: utils/idle_monitor/snb_idle.c:40 +msgid "Processor Package C2" +msgstr "" + +#: utils/idle_monitor/snb_idle.c:47 +msgid "Processor Package C7" +msgstr "" + +#: utils/idle_monitor/amd_fam14h_idle.c:56 +msgid "Package in sleep state (PC1 or deeper)" +msgstr "" + +#: utils/idle_monitor/amd_fam14h_idle.c:63 +msgid "Processor Package C1" +msgstr "" + +#: utils/idle_monitor/amd_fam14h_idle.c:77 +msgid "North Bridge P1 boolean counter (returns 0 or 1)" +msgstr "" + +#: utils/idle_monitor/mperf_monitor.c:35 +msgid "Processor Core not idle" +msgstr "" + +#: utils/idle_monitor/mperf_monitor.c:42 +msgid "Processor Core in an idle state" +msgstr "" + +#: utils/idle_monitor/mperf_monitor.c:50 +msgid "Average Frequency (including boost) in MHz" +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:66 +#, c-format +msgid "" +"cpupower monitor: [-h] [ [-t] | [-l] | [-m <mon1>,[<mon2>] ] ] [-i " +"interval_sec | -c command ...]\n" +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:69 +#, c-format +msgid "" +"cpupower monitor: [-v] [-h] [ [-t] | [-l] | [-m <mon1>,[<mon2>] ] ] [-i " +"interval_sec | -c command ...]\n" +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:71 +#, c-format +msgid "\t -v: be more verbose\n" +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:73 +#, c-format +msgid "\t -h: print this help\n" +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:74 +#, c-format +msgid "\t -i: time interval to measure for in seconds (default 1)\n" +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:75 +#, c-format +msgid "\t -t: show CPU topology/hierarchy\n" +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:76 +#, c-format +msgid "\t -l: list available CPU sleep monitors (for use with -m)\n" +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:77 +#, c-format +msgid "\t -m: show specific CPU sleep monitors only (in same order)\n" +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:79 +#, c-format +msgid "" +"only one of: -t, -l, -m are allowed\n" +"If none of them is passed," +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:80 +#, c-format +msgid " all supported monitors are shown\n" +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:197 +#, c-format +msgid "Monitor %s, Counter %s has no count function. Implementation error\n" +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:207 +#, c-format +msgid " *is offline\n" +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:236 +#, c-format +msgid "%s: max monitor name length (%d) exceeded\n" +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:250 +#, c-format +msgid "No matching monitor found in %s, try -l option\n" +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:266 +#, c-format +msgid "Monitor \"%s\" (%d states) - Might overflow after %u s\n" +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:319 +#, c-format +msgid "%s took %.5f seconds and exited with status %d\n" +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:406 +#, c-format +msgid "Cannot read number of available processors\n" +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:417 +#, c-format +msgid "Available monitor %s needs root access\n" +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:428 +#, c-format +msgid "No HW Cstate monitors found\n" +msgstr "" + +#: utils/cpupower.c:78 +#, c-format +msgid "cpupower [ -c cpulist ] subcommand [ARGS]\n" +msgstr "" + +#: utils/cpupower.c:79 +#, c-format +msgid "cpupower --version\n" +msgstr "" + +#: utils/cpupower.c:80 +#, c-format +msgid "Supported subcommands are:\n" +msgstr "" + +#: utils/cpupower.c:83 +#, c-format +msgid "" +"\n" +"Some subcommands can make use of the -c cpulist option.\n" +msgstr "" + +#: utils/cpupower.c:84 +#, c-format +msgid "Look at the general cpupower manpage how to use it\n" +msgstr "" + +#: utils/cpupower.c:85 +#, c-format +msgid "and read up the subcommand's manpage whether it is supported.\n" +msgstr "" + +#: utils/cpupower.c:86 +#, c-format +msgid "" +"\n" +"Use cpupower help subcommand for getting help for above subcommands.\n" +msgstr "" + +#: utils/cpupower.c:91 +#, c-format +msgid "Report errors and bugs to %s, please.\n" +msgstr "Per favore, comunicare errori e malfunzionamenti a %s.\n" + +#: utils/cpupower.c:114 +#, c-format +msgid "Error parsing cpu list\n" +msgstr "" + +#: utils/cpupower.c:172 +#, c-format +msgid "Subcommand %s needs root privileges\n" +msgstr "" + +#: utils/cpufreq-info.c:31 +#, c-format +msgid "Couldn't count the number of CPUs (%s: %s), assuming 1\n" +msgstr "Impossibile determinare il numero di CPU (%s: %s), assumo sia 1\n" + +#: utils/cpufreq-info.c:63 +#, c-format +msgid "" +" minimum CPU frequency - maximum CPU frequency - governor\n" +msgstr "" +" frequenza minima CPU - frequenza massima CPU - gestore\n" + +#: utils/cpufreq-info.c:151 +#, c-format +msgid "Error while evaluating Boost Capabilities on CPU %d -- are you root?\n" +msgstr "" + +#. P state changes via MSR are identified via cpuid 80000007 +#. on Intel and AMD, but we assume boost capable machines can do that +#. if (cpuid_eax(0x80000000) >= 0x80000007 +#. && (cpuid_edx(0x80000007) & (1 << 7))) +#. +#: utils/cpufreq-info.c:161 +#, c-format +msgid " boost state support: \n" +msgstr "" + +#: utils/cpufreq-info.c:163 +#, c-format +msgid " Supported: %s\n" +msgstr "" + +#: utils/cpufreq-info.c:163 utils/cpufreq-info.c:164 +msgid "yes" +msgstr "" + +#: utils/cpufreq-info.c:163 utils/cpufreq-info.c:164 +msgid "no" +msgstr "" + +#: utils/cpufreq-info.c:164 +#, fuzzy, c-format +msgid " Active: %s\n" +msgstr " modulo %s\n" + +#: utils/cpufreq-info.c:177 +#, c-format +msgid " Boost States: %d\n" +msgstr "" + +#: utils/cpufreq-info.c:178 +#, c-format +msgid " Total States: %d\n" +msgstr "" + +#: utils/cpufreq-info.c:181 +#, c-format +msgid " Pstate-Pb%d: %luMHz (boost state)\n" +msgstr "" + +#: utils/cpufreq-info.c:184 +#, c-format +msgid " Pstate-P%d: %luMHz\n" +msgstr "" + +#: utils/cpufreq-info.c:211 +#, c-format +msgid " no or unknown cpufreq driver is active on this CPU\n" +msgstr " nessun modulo o modulo cpufreq sconosciuto per questa CPU\n" + +#: utils/cpufreq-info.c:213 +#, c-format +msgid " driver: %s\n" +msgstr " modulo %s\n" + +#: utils/cpufreq-info.c:219 +#, c-format +msgid " CPUs which run at the same hardware frequency: " +msgstr " CPU che operano alla stessa frequenza hardware: " + +#: utils/cpufreq-info.c:230 +#, c-format +msgid " CPUs which need to have their frequency coordinated by software: " +msgstr " CPU che è necessario siano coordinate dal software: " + +#: utils/cpufreq-info.c:241 +#, c-format +msgid " maximum transition latency: " +msgstr " latenza massima durante la transizione: " + +#: utils/cpufreq-info.c:247 +#, c-format +msgid " hardware limits: " +msgstr " limiti hardware: " + +#: utils/cpufreq-info.c:256 +#, c-format +msgid " available frequency steps: " +msgstr " frequenze disponibili: " + +#: utils/cpufreq-info.c:269 +#, c-format +msgid " available cpufreq governors: " +msgstr " gestori disponibili: " + +#: utils/cpufreq-info.c:280 +#, c-format +msgid " current policy: frequency should be within " +msgstr " gestore attuale: la frequenza deve mantenersi tra " + +#: utils/cpufreq-info.c:282 +#, c-format +msgid " and " +msgstr " e " + +#: utils/cpufreq-info.c:286 +#, c-format +msgid "" +"The governor \"%s\" may decide which speed to use\n" +" within this range.\n" +msgstr "" +" Il gestore \"%s\" può decidere quale velocità usare\n" +" in questo intervallo.\n" + +#: utils/cpufreq-info.c:293 +#, c-format +msgid " current CPU frequency is " +msgstr " la frequenza attuale della CPU è " + +#: utils/cpufreq-info.c:296 +#, c-format +msgid " (asserted by call to hardware)" +msgstr " (ottenuta da una chiamata diretta all'hardware)" + +#: utils/cpufreq-info.c:304 +#, c-format +msgid " cpufreq stats: " +msgstr " statistiche cpufreq:" + +#: utils/cpufreq-info.c:472 +#, fuzzy, c-format +msgid "Usage: cpupower freqinfo [options]\n" +msgstr "Uso: cpufreq-info [opzioni]\n" + +#: utils/cpufreq-info.c:473 utils/cpufreq-set.c:26 utils/cpupower-set.c:23 +#: utils/cpupower-info.c:22 utils/cpuidle-info.c:148 +#, c-format +msgid "Options:\n" +msgstr "Opzioni:\n" + +#: utils/cpufreq-info.c:474 +#, fuzzy, c-format +msgid " -e, --debug Prints out debug information [default]\n" +msgstr " -e, --debug Mostra informazioni di debug\n" + +#: utils/cpufreq-info.c:475 +#, c-format +msgid "" +" -f, --freq Get frequency the CPU currently runs at, according\n" +" to the cpufreq core *\n" +msgstr "" +" -f, --freq Mostra la frequenza attuale della CPU secondo\n" +" il modulo cpufreq *\n" + +#: utils/cpufreq-info.c:477 +#, c-format +msgid "" +" -w, --hwfreq Get frequency the CPU currently runs at, by reading\n" +" it from hardware (only available to root) *\n" +msgstr "" +" -w, --hwfreq Mostra la frequenza attuale della CPU leggendola\n" +" dall'hardware (disponibile solo per l'utente root) *\n" + +#: utils/cpufreq-info.c:479 +#, c-format +msgid "" +" -l, --hwlimits Determine the minimum and maximum CPU frequency " +"allowed *\n" +msgstr "" +" -l, --hwlimits Determina le frequenze minima e massima possibili per " +"la CPU *\n" + +#: utils/cpufreq-info.c:480 +#, c-format +msgid " -d, --driver Determines the used cpufreq kernel driver *\n" +msgstr "" +" -d, --driver Determina il modulo cpufreq del kernel in uso *\n" + +#: utils/cpufreq-info.c:481 +#, c-format +msgid " -p, --policy Gets the currently used cpufreq policy *\n" +msgstr "" +" -p, --policy Mostra il gestore cpufreq attualmente in uso *\n" + +#: utils/cpufreq-info.c:482 +#, c-format +msgid " -g, --governors Determines available cpufreq governors *\n" +msgstr " -g, --governors Determina i gestori cpufreq disponibili *\n" + +#: utils/cpufreq-info.c:483 +#, c-format +msgid "" +" -r, --related-cpus Determines which CPUs run at the same hardware " +"frequency *\n" +msgstr "" +" -r, --related-cpus Determina quali CPU operano alla stessa frequenza *\n" + +#: utils/cpufreq-info.c:484 +#, c-format +msgid "" +" -a, --affected-cpus Determines which CPUs need to have their frequency\n" +" coordinated by software *\n" +msgstr "" +" -a, --affected-cpus Determina quali CPU devono avere la frequenza\n" +" coordinata dal software *\n" + +#: utils/cpufreq-info.c:486 +#, c-format +msgid " -s, --stats Shows cpufreq statistics if available\n" +msgstr " -s, --stats Mostra le statistiche se disponibili\n" + +#: utils/cpufreq-info.c:487 +#, c-format +msgid "" +" -y, --latency Determines the maximum latency on CPU frequency " +"changes *\n" +msgstr "" +" -y, --latency Determina la latenza massima durante i cambi di " +"frequenza *\n" + +#: utils/cpufreq-info.c:488 +#, c-format +msgid " -b, --boost Checks for turbo or boost modes *\n" +msgstr "" + +#: utils/cpufreq-info.c:489 +#, c-format +msgid "" +" -o, --proc Prints out information like provided by the /proc/" +"cpufreq\n" +" interface in 2.4. and early 2.6. kernels\n" +msgstr "" +" -o, --proc Stampa le informazioni come se provenissero dalla\n" +" interfaccia cpufreq /proc/ presente nei kernel\n" +" 2.4 ed i primi 2.6\n" + +#: utils/cpufreq-info.c:491 +#, c-format +msgid "" +" -m, --human human-readable output for the -f, -w, -s and -y " +"parameters\n" +msgstr "" +" -m, --human formatta l'output delle opzioni -f, -w, -s e -y in " +"maniera\n" +" leggibile da un essere umano\n" + +#: utils/cpufreq-info.c:492 utils/cpuidle-info.c:152 +#, c-format +msgid " -h, --help Prints out this screen\n" +msgstr " -h, --help Stampa questa schermata\n" + +#: utils/cpufreq-info.c:495 +#, c-format +msgid "" +"If no argument or only the -c, --cpu parameter is given, debug output about\n" +"cpufreq is printed which is useful e.g. for reporting bugs.\n" +msgstr "" +"Se non viene specificata nessuna opzione o viene specificata solo l'opzione -" +"c, --cpu,\n" +"le informazioni di debug per cpufreq saranno utili ad esempio a riportare i " +"bug.\n" + +#: utils/cpufreq-info.c:497 +#, c-format +msgid "" +"For the arguments marked with *, omitting the -c or --cpu argument is\n" +"equivalent to setting it to zero\n" +msgstr "" +"Per le opzioni segnalate con *, omettere l'opzione -c o --cpu è come " +"specificarla\n" +"con il valore 0\n" + +#: utils/cpufreq-info.c:580 +#, c-format +msgid "" +"The argument passed to this tool can't be combined with passing a --cpu " +"argument\n" +msgstr "" +"L'opzione specificata a questo programma non può essere combinata con --cpu\n" + +#: utils/cpufreq-info.c:596 +#, c-format +msgid "" +"You can't specify more than one --cpu parameter and/or\n" +"more than one output-specific argument\n" +msgstr "" +"Non è possibile specificare più di una volta l'opzione --cpu e/o\n" +"specificare più di un parametro di output specifico\n" + +#: utils/cpufreq-info.c:600 utils/cpufreq-set.c:82 utils/cpupower-set.c:42 +#: utils/cpupower-info.c:42 utils/cpuidle-info.c:213 +#, c-format +msgid "invalid or unknown argument\n" +msgstr "opzione sconosciuta o non valida\n" + +#: utils/cpufreq-info.c:617 +#, c-format +msgid "couldn't analyze CPU %d as it doesn't seem to be present\n" +msgstr "impossibile analizzare la CPU %d poiché non sembra essere presente\n" + +#: utils/cpufreq-info.c:620 utils/cpupower-info.c:142 +#, c-format +msgid "analyzing CPU %d:\n" +msgstr "analisi della CPU %d:\n" + +#: utils/cpufreq-set.c:25 +#, fuzzy, c-format +msgid "Usage: cpupower frequency-set [options]\n" +msgstr "Uso: cpufreq-set [opzioni]\n" + +#: utils/cpufreq-set.c:27 +#, c-format +msgid "" +" -d FREQ, --min FREQ new minimum CPU frequency the governor may " +"select\n" +msgstr "" +" -d FREQ, --min FREQ la nuova frequenza minima che il gestore cpufreq " +"può scegliere\n" + +#: utils/cpufreq-set.c:28 +#, c-format +msgid "" +" -u FREQ, --max FREQ new maximum CPU frequency the governor may " +"select\n" +msgstr "" +" -u FREQ, --max FREQ la nuova frequenza massima che il gestore cpufreq " +"può scegliere\n" + +#: utils/cpufreq-set.c:29 +#, c-format +msgid " -g GOV, --governor GOV new cpufreq governor\n" +msgstr " -g GOV, --governor GOV nuovo gestore cpufreq\n" + +#: utils/cpufreq-set.c:30 +#, c-format +msgid "" +" -f FREQ, --freq FREQ specific frequency to be set. Requires userspace\n" +" governor to be available and loaded\n" +msgstr "" +" -f FREQ, --freq FREQ specifica la frequenza a cui impostare la CPU.\n" +" È necessario che il gestore userspace sia " +"disponibile e caricato\n" + +#: utils/cpufreq-set.c:32 +#, c-format +msgid " -r, --related Switches all hardware-related CPUs\n" +msgstr "" +" -r, --related Modifica tutte le CPU coordinate dall'hardware\n" + +#: utils/cpufreq-set.c:33 utils/cpupower-set.c:28 utils/cpupower-info.c:27 +#, c-format +msgid " -h, --help Prints out this screen\n" +msgstr " -h, --help Stampa questa schermata\n" + +#: utils/cpufreq-set.c:35 +#, fuzzy, c-format +msgid "" +"Notes:\n" +"1. Omitting the -c or --cpu argument is equivalent to setting it to \"all\"\n" +msgstr "" +"Per le opzioni segnalate con *, omettere l'opzione -c o --cpu è come " +"specificarla\n" +"con il valore 0\n" + +#: utils/cpufreq-set.c:37 +#, fuzzy, c-format +msgid "" +"2. The -f FREQ, --freq FREQ parameter cannot be combined with any other " +"parameter\n" +" except the -c CPU, --cpu CPU parameter\n" +"3. FREQuencies can be passed in Hz, kHz (default), MHz, GHz, or THz\n" +" by postfixing the value with the wanted unit name, without any space\n" +" (FREQuency in kHz =^ Hz * 0.001 =^ MHz * 1000 =^ GHz * 1000000).\n" +msgstr "" +"Note:\n" +"1. Omettere l'opzione -c o --cpu è equivalente a impostarlo a 0\n" +"2. l'opzione -f FREQ, --freq FREQ non può essere specificata con altre " +"opzioni\n" +" ad eccezione dell'opzione -c CPU o --cpu CPU\n" +"3. le FREQuenze possono essere specuficate in Hz, kHz (default), MHz, GHz, " +"or THz\n" +" postponendo l'unità di misura al valore senza nessuno spazio fra loro\n" +" (FREQuenza in kHz =^ Hz * 0.001 =^ MHz * 1000 =^ GHz * 1000000).\n" + +#: utils/cpufreq-set.c:57 +#, c-format +msgid "" +"Error setting new values. Common errors:\n" +"- Do you have proper administration rights? (super-user?)\n" +"- Is the governor you requested available and modprobed?\n" +"- Trying to set an invalid policy?\n" +"- Trying to set a specific frequency, but userspace governor is not " +"available,\n" +" for example because of hardware which cannot be set to a specific " +"frequency\n" +" or because the userspace governor isn't loaded?\n" +msgstr "" +"Si sono verificati degli errori impostando i nuovi valori.\n" +"Alcuni errori comuni possono essere:\n" +"- Hai i necessari diritti di amministrazione? (super-user?)\n" +"- Il gestore che hai richiesto è disponibile e caricato?\n" +"- Stai provando ad impostare una politica di gestione non valida?\n" +"- Stai provando a impostare una specifica frequenza ma il gestore\n" +" userspace non è disponibile, per esempio a causa dell'hardware\n" +" che non supporta frequenze fisse o a causa del fatto che\n" +" il gestore userspace non è caricato?\n" + +#: utils/cpufreq-set.c:170 +#, c-format +msgid "wrong, unknown or unhandled CPU?\n" +msgstr "CPU errata, sconosciuta o non gestita?\n" + +#: utils/cpufreq-set.c:302 +#, c-format +msgid "" +"the -f/--freq parameter cannot be combined with -d/--min, -u/--max or\n" +"-g/--governor parameters\n" +msgstr "" +"l'opzione -f/--freq non può venire combinata con i parametri\n" +" -d/--min, -u/--max o -g/--governor\n" + +#: utils/cpufreq-set.c:308 +#, c-format +msgid "" +"At least one parameter out of -f/--freq, -d/--min, -u/--max, and\n" +"-g/--governor must be passed\n" +msgstr "" +"Almeno una delle opzioni -f/--freq, -d/--min, -u/--max, e -g/--governor\n" +"deve essere specificata\n" + +#: utils/cpufreq-set.c:347 +#, c-format +msgid "Setting cpu: %d\n" +msgstr "" + +#: utils/cpupower-set.c:22 +#, c-format +msgid "Usage: cpupower set [ -b val ] [ -m val ] [ -s val ]\n" +msgstr "" + +#: utils/cpupower-set.c:24 +#, c-format +msgid "" +" -b, --perf-bias [VAL] Sets CPU's power vs performance policy on some\n" +" Intel models [0-15], see manpage for details\n" +msgstr "" + +#: utils/cpupower-set.c:26 +#, c-format +msgid "" +" -m, --sched-mc [VAL] Sets the kernel's multi core scheduler policy.\n" +msgstr "" + +#: utils/cpupower-set.c:27 +#, c-format +msgid "" +" -s, --sched-smt [VAL] Sets the kernel's thread sibling scheduler " +"policy.\n" +msgstr "" + +#: utils/cpupower-set.c:80 +#, c-format +msgid "--perf-bias param out of range [0-%d]\n" +msgstr "" + +#: utils/cpupower-set.c:91 +#, c-format +msgid "--sched-mc param out of range [0-%d]\n" +msgstr "" + +#: utils/cpupower-set.c:102 +#, c-format +msgid "--sched-smt param out of range [0-%d]\n" +msgstr "" + +#: utils/cpupower-set.c:121 +#, c-format +msgid "Error setting sched-mc %s\n" +msgstr "" + +#: utils/cpupower-set.c:127 +#, c-format +msgid "Error setting sched-smt %s\n" +msgstr "" + +#: utils/cpupower-set.c:146 +#, c-format +msgid "Error setting perf-bias value on CPU %d\n" +msgstr "" + +#: utils/cpupower-info.c:21 +#, c-format +msgid "Usage: cpupower info [ -b ] [ -m ] [ -s ]\n" +msgstr "" + +#: utils/cpupower-info.c:23 +#, c-format +msgid "" +" -b, --perf-bias Gets CPU's power vs performance policy on some\n" +" Intel models [0-15], see manpage for details\n" +msgstr "" + +#: utils/cpupower-info.c:25 +#, fuzzy, c-format +msgid " -m, --sched-mc Gets the kernel's multi core scheduler policy.\n" +msgstr "" +" -p, --policy Mostra il gestore cpufreq attualmente in uso *\n" + +#: utils/cpupower-info.c:26 +#, c-format +msgid "" +" -s, --sched-smt Gets the kernel's thread sibling scheduler policy.\n" +msgstr "" + +#: utils/cpupower-info.c:28 +#, c-format +msgid "" +"\n" +"Passing no option will show all info, by default only on core 0\n" +msgstr "" + +#: utils/cpupower-info.c:102 +#, c-format +msgid "System's multi core scheduler setting: " +msgstr "" + +#. if sysfs file is missing it's: errno == ENOENT +#: utils/cpupower-info.c:105 utils/cpupower-info.c:114 +#, c-format +msgid "not supported\n" +msgstr "" + +#: utils/cpupower-info.c:111 +#, c-format +msgid "System's thread sibling scheduler setting: " +msgstr "" + +#: utils/cpupower-info.c:126 +#, c-format +msgid "Intel's performance bias setting needs root privileges\n" +msgstr "" + +#: utils/cpupower-info.c:128 +#, c-format +msgid "System does not support Intel's performance bias setting\n" +msgstr "" + +#: utils/cpupower-info.c:147 +#, c-format +msgid "Could not read perf-bias value\n" +msgstr "" + +#: utils/cpupower-info.c:150 +#, c-format +msgid "perf-bias: %d\n" +msgstr "" + +#: utils/cpuidle-info.c:28 +#, fuzzy, c-format +msgid "Analyzing CPU %d:\n" +msgstr "analisi della CPU %d:\n" + +#: utils/cpuidle-info.c:32 +#, c-format +msgid "CPU %u: No idle states\n" +msgstr "" + +#: utils/cpuidle-info.c:36 +#, c-format +msgid "CPU %u: Can't read idle state info\n" +msgstr "" + +#: utils/cpuidle-info.c:41 +#, c-format +msgid "Could not determine max idle state %u\n" +msgstr "" + +#: utils/cpuidle-info.c:46 +#, c-format +msgid "Number of idle states: %d\n" +msgstr "" + +#: utils/cpuidle-info.c:48 +#, fuzzy, c-format +msgid "Available idle states:" +msgstr " frequenze disponibili: " + +#: utils/cpuidle-info.c:71 +#, c-format +msgid "Flags/Description: %s\n" +msgstr "" + +#: utils/cpuidle-info.c:74 +#, c-format +msgid "Latency: %lu\n" +msgstr "" + +#: utils/cpuidle-info.c:76 +#, c-format +msgid "Usage: %lu\n" +msgstr "" + +#: utils/cpuidle-info.c:78 +#, c-format +msgid "Duration: %llu\n" +msgstr "" + +#: utils/cpuidle-info.c:90 +#, c-format +msgid "Could not determine cpuidle driver\n" +msgstr "" + +#: utils/cpuidle-info.c:94 +#, fuzzy, c-format +msgid "CPUidle driver: %s\n" +msgstr " modulo %s\n" + +#: utils/cpuidle-info.c:99 +#, c-format +msgid "Could not determine cpuidle governor\n" +msgstr "" + +#: utils/cpuidle-info.c:103 +#, c-format +msgid "CPUidle governor: %s\n" +msgstr "" + +#: utils/cpuidle-info.c:122 +#, c-format +msgid "CPU %u: Can't read C-state info\n" +msgstr "" + +#. printf("Cstates: %d\n", cstates); +#: utils/cpuidle-info.c:127 +#, c-format +msgid "active state: C0\n" +msgstr "" + +#: utils/cpuidle-info.c:128 +#, c-format +msgid "max_cstate: C%u\n" +msgstr "" + +#: utils/cpuidle-info.c:129 +#, fuzzy, c-format +msgid "maximum allowed latency: %lu usec\n" +msgstr " latenza massima durante la transizione: " + +#: utils/cpuidle-info.c:130 +#, c-format +msgid "states:\t\n" +msgstr "" + +#: utils/cpuidle-info.c:132 +#, c-format +msgid " C%d: type[C%d] " +msgstr "" + +#: utils/cpuidle-info.c:134 +#, c-format +msgid "promotion[--] demotion[--] " +msgstr "" + +#: utils/cpuidle-info.c:135 +#, c-format +msgid "latency[%03lu] " +msgstr "" + +#: utils/cpuidle-info.c:137 +#, c-format +msgid "usage[%08lu] " +msgstr "" + +#: utils/cpuidle-info.c:139 +#, c-format +msgid "duration[%020Lu] \n" +msgstr "" + +#: utils/cpuidle-info.c:147 +#, fuzzy, c-format +msgid "Usage: cpupower idleinfo [options]\n" +msgstr "Uso: cpufreq-info [opzioni]\n" + +#: utils/cpuidle-info.c:149 +#, fuzzy, c-format +msgid " -s, --silent Only show general C-state information\n" +msgstr " -e, --debug Mostra informazioni di debug\n" + +#: utils/cpuidle-info.c:150 +#, fuzzy, c-format +msgid "" +" -o, --proc Prints out information like provided by the /proc/" +"acpi/processor/*/power\n" +" interface in older kernels\n" +msgstr "" +" -o, --proc Stampa le informazioni come se provenissero dalla\n" +" interfaccia cpufreq /proc/ presente nei kernel\n" +" 2.4 ed i primi 2.6\n" + +#: utils/cpuidle-info.c:209 +#, fuzzy, c-format +msgid "You can't specify more than one output-specific argument\n" +msgstr "" +"Non è possibile specificare più di una volta l'opzione --cpu e/o\n" +"specificare più di un parametro di output specifico\n" + +#~ msgid "" +#~ " -c CPU, --cpu CPU CPU number which information shall be determined " +#~ "about\n" +#~ msgstr "" +#~ " -c CPU, --cpu CPU Numero di CPU per la quale ottenere le " +#~ "informazioni\n" + +#~ msgid "" +#~ " -c CPU, --cpu CPU number of CPU where cpufreq settings shall be " +#~ "modified\n" +#~ msgstr "" +#~ " -c CPU, --cpu CPU numero di CPU per la quale modificare le " +#~ "impostazioni\n" + +#, fuzzy +#~ msgid " CPUs which coordinate software frequency requirements: " +#~ msgstr "" +#~ " CPU per le quali e` necessario cambiare la frequenza " +#~ "contemporaneamente: " diff --git a/tools/power/cpupower/po/pt.po b/tools/power/cpupower/po/pt.po new file mode 100644 index 000000000..902186585 --- /dev/null +++ b/tools/power/cpupower/po/pt.po @@ -0,0 +1,957 @@ +# Brazilian Portuguese translations for cpufrequtils package +# Copyright (C) 2008 THE cpufrequtils'S COPYRIGHT HOLDER +# This file is distributed under the same license as the cpufrequtils package. +# Claudio Eduardo <claudioeddy@gmail.com>, 2009. +# +# +msgid "" +msgstr "" +"Project-Id-Version: cpufrequtils 004\n" +"Report-Msgid-Bugs-To: \n" +"POT-Creation-Date: 2011-03-08 17:03+0100\n" +"PO-Revision-Date: 2008-06-14 22:16-0400\n" +"Last-Translator: Claudio Eduardo <claudioeddy@gmail.com>\n" +"MIME-Version: 1.0\n" +"Content-Type: text/plain; charset=UTF-8\n" +"Content-Transfer-Encoding: 8bit\n" + +#: utils/idle_monitor/nhm_idle.c:36 +msgid "Processor Core C3" +msgstr "" + +#: utils/idle_monitor/nhm_idle.c:43 +msgid "Processor Core C6" +msgstr "" + +#: utils/idle_monitor/nhm_idle.c:51 +msgid "Processor Package C3" +msgstr "" + +#: utils/idle_monitor/nhm_idle.c:58 utils/idle_monitor/amd_fam14h_idle.c:70 +msgid "Processor Package C6" +msgstr "" + +#: utils/idle_monitor/snb_idle.c:33 +msgid "Processor Core C7" +msgstr "" + +#: utils/idle_monitor/snb_idle.c:40 +msgid "Processor Package C2" +msgstr "" + +#: utils/idle_monitor/snb_idle.c:47 +msgid "Processor Package C7" +msgstr "" + +#: utils/idle_monitor/amd_fam14h_idle.c:56 +msgid "Package in sleep state (PC1 or deeper)" +msgstr "" + +#: utils/idle_monitor/amd_fam14h_idle.c:63 +msgid "Processor Package C1" +msgstr "" + +#: utils/idle_monitor/amd_fam14h_idle.c:77 +msgid "North Bridge P1 boolean counter (returns 0 or 1)" +msgstr "" + +#: utils/idle_monitor/mperf_monitor.c:35 +msgid "Processor Core not idle" +msgstr "" + +#: utils/idle_monitor/mperf_monitor.c:42 +msgid "Processor Core in an idle state" +msgstr "" + +#: utils/idle_monitor/mperf_monitor.c:50 +msgid "Average Frequency (including boost) in MHz" +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:66 +#, c-format +msgid "" +"cpupower monitor: [-h] [ [-t] | [-l] | [-m <mon1>,[<mon2>] ] ] [-i " +"interval_sec | -c command ...]\n" +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:69 +#, c-format +msgid "" +"cpupower monitor: [-v] [-h] [ [-t] | [-l] | [-m <mon1>,[<mon2>] ] ] [-i " +"interval_sec | -c command ...]\n" +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:71 +#, c-format +msgid "\t -v: be more verbose\n" +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:73 +#, c-format +msgid "\t -h: print this help\n" +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:74 +#, c-format +msgid "\t -i: time interval to measure for in seconds (default 1)\n" +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:75 +#, c-format +msgid "\t -t: show CPU topology/hierarchy\n" +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:76 +#, c-format +msgid "\t -l: list available CPU sleep monitors (for use with -m)\n" +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:77 +#, c-format +msgid "\t -m: show specific CPU sleep monitors only (in same order)\n" +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:79 +#, c-format +msgid "" +"only one of: -t, -l, -m are allowed\n" +"If none of them is passed," +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:80 +#, c-format +msgid " all supported monitors are shown\n" +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:197 +#, c-format +msgid "Monitor %s, Counter %s has no count function. Implementation error\n" +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:207 +#, c-format +msgid " *is offline\n" +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:236 +#, c-format +msgid "%s: max monitor name length (%d) exceeded\n" +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:250 +#, c-format +msgid "No matching monitor found in %s, try -l option\n" +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:266 +#, c-format +msgid "Monitor \"%s\" (%d states) - Might overflow after %u s\n" +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:319 +#, c-format +msgid "%s took %.5f seconds and exited with status %d\n" +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:406 +#, c-format +msgid "Cannot read number of available processors\n" +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:417 +#, c-format +msgid "Available monitor %s needs root access\n" +msgstr "" + +#: utils/idle_monitor/cpupower-monitor.c:428 +#, c-format +msgid "No HW Cstate monitors found\n" +msgstr "" + +#: utils/cpupower.c:78 +#, c-format +msgid "cpupower [ -c cpulist ] subcommand [ARGS]\n" +msgstr "" + +#: utils/cpupower.c:79 +#, c-format +msgid "cpupower --version\n" +msgstr "" + +#: utils/cpupower.c:80 +#, c-format +msgid "Supported subcommands are:\n" +msgstr "" + +#: utils/cpupower.c:83 +#, c-format +msgid "" +"\n" +"Some subcommands can make use of the -c cpulist option.\n" +msgstr "" + +#: utils/cpupower.c:84 +#, c-format +msgid "Look at the general cpupower manpage how to use it\n" +msgstr "" + +#: utils/cpupower.c:85 +#, c-format +msgid "and read up the subcommand's manpage whether it is supported.\n" +msgstr "" + +#: utils/cpupower.c:86 +#, c-format +msgid "" +"\n" +"Use cpupower help subcommand for getting help for above subcommands.\n" +msgstr "" + +#: utils/cpupower.c:91 +#, c-format +msgid "Report errors and bugs to %s, please.\n" +msgstr "Reporte erros e bugs para %s, por favor.\n" + +#: utils/cpupower.c:114 +#, c-format +msgid "Error parsing cpu list\n" +msgstr "" + +#: utils/cpupower.c:172 +#, c-format +msgid "Subcommand %s needs root privileges\n" +msgstr "" + +#: utils/cpufreq-info.c:31 +#, c-format +msgid "Couldn't count the number of CPUs (%s: %s), assuming 1\n" +msgstr "Não foi possível contar o número de CPUs (%s: %s), assumindo 1\n" + +#: utils/cpufreq-info.c:63 +#, c-format +msgid "" +" minimum CPU frequency - maximum CPU frequency - governor\n" +msgstr "" +" frequência mínina do CPU - frequência máxima do CPU - " +"regulador\n" + +#: utils/cpufreq-info.c:151 +#, c-format +msgid "Error while evaluating Boost Capabilities on CPU %d -- are you root?\n" +msgstr "" + +#. P state changes via MSR are identified via cpuid 80000007 +#. on Intel and AMD, but we assume boost capable machines can do that +#. if (cpuid_eax(0x80000000) >= 0x80000007 +#. && (cpuid_edx(0x80000007) & (1 << 7))) +#. +#: utils/cpufreq-info.c:161 +#, c-format +msgid " boost state support: \n" +msgstr "" + +#: utils/cpufreq-info.c:163 +#, c-format +msgid " Supported: %s\n" +msgstr "" + +#: utils/cpufreq-info.c:163 utils/cpufreq-info.c:164 +msgid "yes" +msgstr "" + +#: utils/cpufreq-info.c:163 utils/cpufreq-info.c:164 +msgid "no" +msgstr "" + +#: utils/cpufreq-info.c:164 +#, fuzzy, c-format +msgid " Active: %s\n" +msgstr " driver: %s\n" + +#: utils/cpufreq-info.c:177 +#, c-format +msgid " Boost States: %d\n" +msgstr "" + +#: utils/cpufreq-info.c:178 +#, c-format +msgid " Total States: %d\n" +msgstr "" + +#: utils/cpufreq-info.c:181 +#, c-format +msgid " Pstate-Pb%d: %luMHz (boost state)\n" +msgstr "" + +#: utils/cpufreq-info.c:184 +#, c-format +msgid " Pstate-P%d: %luMHz\n" +msgstr "" + +#: utils/cpufreq-info.c:211 +#, c-format +msgid " no or unknown cpufreq driver is active on this CPU\n" +msgstr " nenhum ou driver do cpufreq deconhecido está ativo nesse CPU\n" + +#: utils/cpufreq-info.c:213 +#, c-format +msgid " driver: %s\n" +msgstr " driver: %s\n" + +#: utils/cpufreq-info.c:219 +#, c-format +msgid " CPUs which run at the same hardware frequency: " +msgstr " CPUs que rodam na mesma frequência de hardware: " + +#: utils/cpufreq-info.c:230 +#, c-format +msgid " CPUs which need to have their frequency coordinated by software: " +msgstr " CPUs que precisam ter suas frequências coordenadas por software: " + +#: utils/cpufreq-info.c:241 +#, c-format +msgid " maximum transition latency: " +msgstr " maior latência de transição: " + +#: utils/cpufreq-info.c:247 +#, c-format +msgid " hardware limits: " +msgstr " limites do hardware: " + +#: utils/cpufreq-info.c:256 +#, c-format +msgid " available frequency steps: " +msgstr " níveis de frequência disponíveis: " + +#: utils/cpufreq-info.c:269 +#, c-format +msgid " available cpufreq governors: " +msgstr " reguladores do cpufreq disponíveis: " + +#: utils/cpufreq-info.c:280 +#, c-format +msgid " current policy: frequency should be within " +msgstr " política de frequência atual deve estar entre " + +#: utils/cpufreq-info.c:282 +#, c-format +msgid " and " +msgstr " e " + +#: utils/cpufreq-info.c:286 +#, c-format +msgid "" +"The governor \"%s\" may decide which speed to use\n" +" within this range.\n" +msgstr "" +"O regulador \"%s\" deve decidir qual velocidade usar\n" +" dentro desse limite.\n" + +#: utils/cpufreq-info.c:293 +#, c-format +msgid " current CPU frequency is " +msgstr " frequência atual do CPU é " + +#: utils/cpufreq-info.c:296 +#, c-format +msgid " (asserted by call to hardware)" +msgstr " (declarado por chamada ao hardware)" + +#: utils/cpufreq-info.c:304 +#, c-format +msgid " cpufreq stats: " +msgstr " status do cpufreq: " + +#: utils/cpufreq-info.c:472 +#, fuzzy, c-format +msgid "Usage: cpupower freqinfo [options]\n" +msgstr "Uso: cpufreq-info [opções]\n" + +#: utils/cpufreq-info.c:473 utils/cpufreq-set.c:26 utils/cpupower-set.c:23 +#: utils/cpupower-info.c:22 utils/cpuidle-info.c:148 +#, c-format +msgid "Options:\n" +msgstr "Opções:\n" + +#: utils/cpufreq-info.c:474 +#, fuzzy, c-format +msgid " -e, --debug Prints out debug information [default]\n" +msgstr " -e, --debug Mostra informação de debug\n" + +#: utils/cpufreq-info.c:475 +#, c-format +msgid "" +" -f, --freq Get frequency the CPU currently runs at, according\n" +" to the cpufreq core *\n" +msgstr "" +" -f, --freq Obtem a frequência na qual o CPU roda no momento, de " +"acordo\n" +" com o núcleo do cpufreq *\n" + +#: utils/cpufreq-info.c:477 +#, c-format +msgid "" +" -w, --hwfreq Get frequency the CPU currently runs at, by reading\n" +" it from hardware (only available to root) *\n" +msgstr "" +" -w, --hwfreq Obtem a frequência na qual o CPU está operando no " +"momento,\n" +" através de leitura no hardware (disponível somente " +"para root) *\n" + +#: utils/cpufreq-info.c:479 +#, c-format +msgid "" +" -l, --hwlimits Determine the minimum and maximum CPU frequency " +"allowed *\n" +msgstr "" +" -l, --hwlimits Determina a frequência mínima e máxima do CPU " +"permitida *\n" + +#: utils/cpufreq-info.c:480 +#, c-format +msgid " -d, --driver Determines the used cpufreq kernel driver *\n" +msgstr "" +" -d, --driver Determina o driver do kernel do cpufreq usado *\n" + +#: utils/cpufreq-info.c:481 +#, c-format +msgid " -p, --policy Gets the currently used cpufreq policy *\n" +msgstr "" +"--p, --policy Obtem a política do cpufreq em uso no momento *\n" + +#: utils/cpufreq-info.c:482 +#, c-format +msgid " -g, --governors Determines available cpufreq governors *\n" +msgstr "" +" -g, --governors Determina reguladores do cpufreq disponíveis *\n" + +#: utils/cpufreq-info.c:483 +#, c-format +msgid "" +" -r, --related-cpus Determines which CPUs run at the same hardware " +"frequency *\n" +msgstr "" +" -r, --related-cpus Determina quais CPUs rodam na mesma frequência de " +"hardware *\n" + +#: utils/cpufreq-info.c:484 +#, c-format +msgid "" +" -a, --affected-cpus Determines which CPUs need to have their frequency\n" +" coordinated by software *\n" +msgstr "" +" -a, --affected-cpus Determina quais CPUs precisam ter suas frequências\n" +" coordenadas por software *\n" + +#: utils/cpufreq-info.c:486 +#, c-format +msgid " -s, --stats Shows cpufreq statistics if available\n" +msgstr " -s, --stats Mostra estatísticas do cpufreq se disponíveis\n" + +#: utils/cpufreq-info.c:487 +#, c-format +msgid "" +" -y, --latency Determines the maximum latency on CPU frequency " +"changes *\n" +msgstr "" +" -y, --latency Determina a latência máxima nas trocas de frequência " +"do CPU *\n" + +#: utils/cpufreq-info.c:488 +#, c-format +msgid " -b, --boost Checks for turbo or boost modes *\n" +msgstr "" + +#: utils/cpufreq-info.c:489 +#, c-format +msgid "" +" -o, --proc Prints out information like provided by the /proc/" +"cpufreq\n" +" interface in 2.4. and early 2.6. kernels\n" +msgstr "" +" -o, --proc Mostra informação do tipo provida pela interface /" +"proc/cpufreq\n" +" em kernels 2.4. e mais recentes 2.6\n" + +#: utils/cpufreq-info.c:491 +#, c-format +msgid "" +" -m, --human human-readable output for the -f, -w, -s and -y " +"parameters\n" +msgstr "" +" -m, --human saída legível para humanos para os parâmetros -f, -w, " +"-s e -y\n" + +#: utils/cpufreq-info.c:492 utils/cpuidle-info.c:152 +#, c-format +msgid " -h, --help Prints out this screen\n" +msgstr " -h, --help Imprime essa tela\n" + +#: utils/cpufreq-info.c:495 +#, c-format +msgid "" +"If no argument or only the -c, --cpu parameter is given, debug output about\n" +"cpufreq is printed which is useful e.g. for reporting bugs.\n" +msgstr "" +"Se nenhum argumento ou somente o parâmetro -c, --cpu é dado, informação de " +"debug sobre\n" +"o cpufreq é mostrada, o que é útil por exemplo para reportar bugs.\n" + +#: utils/cpufreq-info.c:497 +#, c-format +msgid "" +"For the arguments marked with *, omitting the -c or --cpu argument is\n" +"equivalent to setting it to zero\n" +msgstr "" +"Para os argumentos marcados com *, omitir o argumento -c ou --cpu é\n" +"equivalente a setá-lo como zero\n" + +#: utils/cpufreq-info.c:580 +#, c-format +msgid "" +"The argument passed to this tool can't be combined with passing a --cpu " +"argument\n" +msgstr "" +"O argumento usado pra essa ferramenta não pode ser combinado com um " +"argumento --cpu\n" + +#: utils/cpufreq-info.c:596 +#, c-format +msgid "" +"You can't specify more than one --cpu parameter and/or\n" +"more than one output-specific argument\n" +msgstr "" +"Você não pode especificar mais do que um parâmetro --cpu e/ou\n" +"mais do que um argumento de saída específico\n" + +#: utils/cpufreq-info.c:600 utils/cpufreq-set.c:82 utils/cpupower-set.c:42 +#: utils/cpupower-info.c:42 utils/cpuidle-info.c:213 +#, c-format +msgid "invalid or unknown argument\n" +msgstr "argumento inválido ou desconhecido\n" + +#: utils/cpufreq-info.c:617 +#, c-format +msgid "couldn't analyze CPU %d as it doesn't seem to be present\n" +msgstr "" +"não foi possível analisar o CPU % já que o mesmo parece não estar presente\n" + +#: utils/cpufreq-info.c:620 utils/cpupower-info.c:142 +#, c-format +msgid "analyzing CPU %d:\n" +msgstr "analisando o CPU %d:\n" + +#: utils/cpufreq-set.c:25 +#, fuzzy, c-format +msgid "Usage: cpupower frequency-set [options]\n" +msgstr "Uso: cpufreq-set [opções]\n" + +#: utils/cpufreq-set.c:27 +#, c-format +msgid "" +" -d FREQ, --min FREQ new minimum CPU frequency the governor may " +"select\n" +msgstr "" +" -d FREQ, --min FREQ nova frequência mínima do CPU que o regulador " +"deve selecionar\n" + +#: utils/cpufreq-set.c:28 +#, c-format +msgid "" +" -u FREQ, --max FREQ new maximum CPU frequency the governor may " +"select\n" +msgstr "" +" -u FREQ, --max FREQ nova frequência máxima do CPU que o regulador " +"deve escolher\n" + +#: utils/cpufreq-set.c:29 +#, c-format +msgid " -g GOV, --governor GOV new cpufreq governor\n" +msgstr " -g GOV, --governor GOV novo regulador do cpufreq\n" + +#: utils/cpufreq-set.c:30 +#, c-format +msgid "" +" -f FREQ, --freq FREQ specific frequency to be set. Requires userspace\n" +" governor to be available and loaded\n" +msgstr "" +" -f FREQ, --freq FREQ frequência específica para ser setada. Necessita " +"que o regulador em\n" +" nível de usuário esteja disponível e carregado\n" + +#: utils/cpufreq-set.c:32 +#, c-format +msgid " -r, --related Switches all hardware-related CPUs\n" +msgstr "" +" -r, --related Modifica todos os CPUs relacionados ao hardware\n" + +#: utils/cpufreq-set.c:33 utils/cpupower-set.c:28 utils/cpupower-info.c:27 +#, c-format +msgid " -h, --help Prints out this screen\n" +msgstr " -h, --help Mostra essa tela\n" + +#: utils/cpufreq-set.c:35 +#, fuzzy, c-format +msgid "" +"Notes:\n" +"1. Omitting the -c or --cpu argument is equivalent to setting it to \"all\"\n" +msgstr "" +"Para os argumentos marcados com *, omitir o argumento -c ou --cpu é\n" +"equivalente a setá-lo como zero\n" + +#: utils/cpufreq-set.c:37 +#, fuzzy, c-format +msgid "" +"2. The -f FREQ, --freq FREQ parameter cannot be combined with any other " +"parameter\n" +" except the -c CPU, --cpu CPU parameter\n" +"3. FREQuencies can be passed in Hz, kHz (default), MHz, GHz, or THz\n" +" by postfixing the value with the wanted unit name, without any space\n" +" (FREQuency in kHz =^ Hz * 0.001 =^ MHz * 1000 =^ GHz * 1000000).\n" +msgstr "" +"Notas:\n" +"1. Omitir o argumento -c or --cpu é equivalente a setá-lo como zero\n" +"2. O parâmetro -f FREQ, --freq FREQ não pode ser combinado com qualquer " +"outro parâmetro\n" +" exceto com o parâmetro -c CPU, --cpu CPU\n" +"3. FREQuências podem ser usadas em Hz, kHz (padrão), MHz, GHz, o THz\n" +" colocando o nome desejado da unidade após o valor, sem qualquer espaço\n" +" (FREQuência em kHz =^ Hz * 0.001 =^ MHz * 1000 =^ GHz * 1000000).\n" + +#: utils/cpufreq-set.c:57 +#, c-format +msgid "" +"Error setting new values. Common errors:\n" +"- Do you have proper administration rights? (super-user?)\n" +"- Is the governor you requested available and modprobed?\n" +"- Trying to set an invalid policy?\n" +"- Trying to set a specific frequency, but userspace governor is not " +"available,\n" +" for example because of hardware which cannot be set to a specific " +"frequency\n" +" or because the userspace governor isn't loaded?\n" +msgstr "" +"Erro ao setar novos valores. Erros comuns:\n" +"- Você tem direitos administrativos necessários? (super-usuário?)\n" +"- O regulador que você requesitou está disponível e foi \"modprobed\"?\n" +"- Tentando setar uma política inválida?\n" +"- Tentando setar uma frequência específica, mas o regulador em nível de " +"usuário não está disponível,\n" +" por exemplo devido ao hardware que não pode ser setado pra uma frequência " +"específica\n" +" ou porque o regulador em nível de usuário não foi carregado?\n" + +#: utils/cpufreq-set.c:170 +#, c-format +msgid "wrong, unknown or unhandled CPU?\n" +msgstr "CPU errado, desconhecido ou inesperado?\n" + +#: utils/cpufreq-set.c:302 +#, c-format +msgid "" +"the -f/--freq parameter cannot be combined with -d/--min, -u/--max or\n" +"-g/--governor parameters\n" +msgstr "" +"o parâmetro -f/--freq não pode ser combinado com os parâmetros -d/--min, -" +"u/--max ou\n" +"-g/--governor\n" + +#: utils/cpufreq-set.c:308 +#, c-format +msgid "" +"At least one parameter out of -f/--freq, -d/--min, -u/--max, and\n" +"-g/--governor must be passed\n" +msgstr "" +"Pelo menos um parâmetro entre -f/--freq, -d/--min, -u/--max, e\n" +"-g/--governor deve ser usado\n" + +#: utils/cpufreq-set.c:347 +#, c-format +msgid "Setting cpu: %d\n" +msgstr "" + +#: utils/cpupower-set.c:22 +#, c-format +msgid "Usage: cpupower set [ -b val ] [ -m val ] [ -s val ]\n" +msgstr "" + +#: utils/cpupower-set.c:24 +#, c-format +msgid "" +" -b, --perf-bias [VAL] Sets CPU's power vs performance policy on some\n" +" Intel models [0-15], see manpage for details\n" +msgstr "" + +#: utils/cpupower-set.c:26 +#, c-format +msgid "" +" -m, --sched-mc [VAL] Sets the kernel's multi core scheduler policy.\n" +msgstr "" + +#: utils/cpupower-set.c:27 +#, c-format +msgid "" +" -s, --sched-smt [VAL] Sets the kernel's thread sibling scheduler " +"policy.\n" +msgstr "" + +#: utils/cpupower-set.c:80 +#, c-format +msgid "--perf-bias param out of range [0-%d]\n" +msgstr "" + +#: utils/cpupower-set.c:91 +#, c-format +msgid "--sched-mc param out of range [0-%d]\n" +msgstr "" + +#: utils/cpupower-set.c:102 +#, c-format +msgid "--sched-smt param out of range [0-%d]\n" +msgstr "" + +#: utils/cpupower-set.c:121 +#, c-format +msgid "Error setting sched-mc %s\n" +msgstr "" + +#: utils/cpupower-set.c:127 +#, c-format +msgid "Error setting sched-smt %s\n" +msgstr "" + +#: utils/cpupower-set.c:146 +#, c-format +msgid "Error setting perf-bias value on CPU %d\n" +msgstr "" + +#: utils/cpupower-info.c:21 +#, c-format +msgid "Usage: cpupower info [ -b ] [ -m ] [ -s ]\n" +msgstr "" + +#: utils/cpupower-info.c:23 +#, c-format +msgid "" +" -b, --perf-bias Gets CPU's power vs performance policy on some\n" +" Intel models [0-15], see manpage for details\n" +msgstr "" + +#: utils/cpupower-info.c:25 +#, fuzzy, c-format +msgid " -m, --sched-mc Gets the kernel's multi core scheduler policy.\n" +msgstr "" +"--p, --policy Obtem a política do cpufreq em uso no momento *\n" + +#: utils/cpupower-info.c:26 +#, c-format +msgid "" +" -s, --sched-smt Gets the kernel's thread sibling scheduler policy.\n" +msgstr "" + +#: utils/cpupower-info.c:28 +#, c-format +msgid "" +"\n" +"Passing no option will show all info, by default only on core 0\n" +msgstr "" + +#: utils/cpupower-info.c:102 +#, c-format +msgid "System's multi core scheduler setting: " +msgstr "" + +#. if sysfs file is missing it's: errno == ENOENT +#: utils/cpupower-info.c:105 utils/cpupower-info.c:114 +#, c-format +msgid "not supported\n" +msgstr "" + +#: utils/cpupower-info.c:111 +#, c-format +msgid "System's thread sibling scheduler setting: " +msgstr "" + +#: utils/cpupower-info.c:126 +#, c-format +msgid "Intel's performance bias setting needs root privileges\n" +msgstr "" + +#: utils/cpupower-info.c:128 +#, c-format +msgid "System does not support Intel's performance bias setting\n" +msgstr "" + +#: utils/cpupower-info.c:147 +#, c-format +msgid "Could not read perf-bias value\n" +msgstr "" + +#: utils/cpupower-info.c:150 +#, c-format +msgid "perf-bias: %d\n" +msgstr "" + +#: utils/cpuidle-info.c:28 +#, fuzzy, c-format +msgid "Analyzing CPU %d:\n" +msgstr "analisando o CPU %d:\n" + +#: utils/cpuidle-info.c:32 +#, c-format +msgid "CPU %u: No idle states\n" +msgstr "" + +#: utils/cpuidle-info.c:36 +#, c-format +msgid "CPU %u: Can't read idle state info\n" +msgstr "" + +#: utils/cpuidle-info.c:41 +#, c-format +msgid "Could not determine max idle state %u\n" +msgstr "" + +#: utils/cpuidle-info.c:46 +#, c-format +msgid "Number of idle states: %d\n" +msgstr "" + +#: utils/cpuidle-info.c:48 +#, fuzzy, c-format +msgid "Available idle states:" +msgstr " níveis de frequência disponíveis: " + +#: utils/cpuidle-info.c:71 +#, c-format +msgid "Flags/Description: %s\n" +msgstr "" + +#: utils/cpuidle-info.c:74 +#, c-format +msgid "Latency: %lu\n" +msgstr "" + +#: utils/cpuidle-info.c:76 +#, c-format +msgid "Usage: %lu\n" +msgstr "" + +#: utils/cpuidle-info.c:78 +#, c-format +msgid "Duration: %llu\n" +msgstr "" + +#: utils/cpuidle-info.c:90 +#, c-format +msgid "Could not determine cpuidle driver\n" +msgstr "" + +#: utils/cpuidle-info.c:94 +#, fuzzy, c-format +msgid "CPUidle driver: %s\n" +msgstr " driver: %s\n" + +#: utils/cpuidle-info.c:99 +#, c-format +msgid "Could not determine cpuidle governor\n" +msgstr "" + +#: utils/cpuidle-info.c:103 +#, c-format +msgid "CPUidle governor: %s\n" +msgstr "" + +#: utils/cpuidle-info.c:122 +#, c-format +msgid "CPU %u: Can't read C-state info\n" +msgstr "" + +#. printf("Cstates: %d\n", cstates); +#: utils/cpuidle-info.c:127 +#, c-format +msgid "active state: C0\n" +msgstr "" + +#: utils/cpuidle-info.c:128 +#, c-format +msgid "max_cstate: C%u\n" +msgstr "" + +#: utils/cpuidle-info.c:129 +#, fuzzy, c-format +msgid "maximum allowed latency: %lu usec\n" +msgstr " maior latência de transição: " + +#: utils/cpuidle-info.c:130 +#, c-format +msgid "states:\t\n" +msgstr "" + +#: utils/cpuidle-info.c:132 +#, c-format +msgid " C%d: type[C%d] " +msgstr "" + +#: utils/cpuidle-info.c:134 +#, c-format +msgid "promotion[--] demotion[--] " +msgstr "" + +#: utils/cpuidle-info.c:135 +#, c-format +msgid "latency[%03lu] " +msgstr "" + +#: utils/cpuidle-info.c:137 +#, c-format +msgid "usage[%08lu] " +msgstr "" + +#: utils/cpuidle-info.c:139 +#, c-format +msgid "duration[%020Lu] \n" +msgstr "" + +#: utils/cpuidle-info.c:147 +#, fuzzy, c-format +msgid "Usage: cpupower idleinfo [options]\n" +msgstr "Uso: cpufreq-info [opções]\n" + +#: utils/cpuidle-info.c:149 +#, fuzzy, c-format +msgid " -s, --silent Only show general C-state information\n" +msgstr " -e, --debug Mostra informação de debug\n" + +#: utils/cpuidle-info.c:150 +#, fuzzy, c-format +msgid "" +" -o, --proc Prints out information like provided by the /proc/" +"acpi/processor/*/power\n" +" interface in older kernels\n" +msgstr "" +" -o, --proc Mostra informação do tipo provida pela interface /" +"proc/cpufreq\n" +" em kernels 2.4. e mais recentes 2.6\n" + +#: utils/cpuidle-info.c:209 +#, fuzzy, c-format +msgid "You can't specify more than one output-specific argument\n" +msgstr "" +"Você não pode especificar mais do que um parâmetro --cpu e/ou\n" +"mais do que um argumento de saída específico\n" + +#~ msgid "" +#~ " -c CPU, --cpu CPU CPU number which information shall be determined " +#~ "about\n" +#~ msgstr "" +#~ " -c CPU, --cpu CPU número do CPU sobre o qual as inforções devem ser " +#~ "determinadas\n" + +#~ msgid "" +#~ " -c CPU, --cpu CPU number of CPU where cpufreq settings shall be " +#~ "modified\n" +#~ msgstr "" +#~ " -c CPU, --cpu CPU número do CPU onde as configurações do cpufreq " +#~ "vão ser modificadas\n" diff --git a/tools/power/cpupower/utils/builtin.h b/tools/power/cpupower/utils/builtin.h new file mode 100644 index 000000000..f7065ae60 --- /dev/null +++ b/tools/power/cpupower/utils/builtin.h @@ -0,0 +1,13 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef BUILTIN_H +#define BUILTIN_H + +extern int cmd_set(int argc, const char **argv); +extern int cmd_info(int argc, const char **argv); +extern int cmd_freq_set(int argc, const char **argv); +extern int cmd_freq_info(int argc, const char **argv); +extern int cmd_idle_set(int argc, const char **argv); +extern int cmd_idle_info(int argc, const char **argv); +extern int cmd_monitor(int argc, const char **argv); + +#endif diff --git a/tools/power/cpupower/utils/cpufreq-info.c b/tools/power/cpupower/utils/cpufreq-info.c new file mode 100644 index 000000000..6efc0f6b1 --- /dev/null +++ b/tools/power/cpupower/utils/cpufreq-info.c @@ -0,0 +1,669 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * (C) 2004-2009 Dominik Brodowski <linux@dominikbrodowski.de> + */ + + +#include <unistd.h> +#include <stdio.h> +#include <errno.h> +#include <stdlib.h> +#include <string.h> +#include <limits.h> + +#include <getopt.h> + +#include "cpufreq.h" +#include "helpers/sysfs.h" +#include "helpers/helpers.h" +#include "helpers/bitmask.h" + +#define LINE_LEN 10 + +static unsigned int count_cpus(void) +{ + FILE *fp; + char value[LINE_LEN]; + unsigned int ret = 0; + unsigned int cpunr = 0; + + fp = fopen("/proc/stat", "r"); + if (!fp) { + printf(_("Couldn't count the number of CPUs (%s: %s), assuming 1\n"), "/proc/stat", strerror(errno)); + return 1; + } + + while (!feof(fp)) { + if (!fgets(value, LINE_LEN, fp)) + continue; + value[LINE_LEN - 1] = '\0'; + if (strlen(value) < (LINE_LEN - 2)) + continue; + if (strstr(value, "cpu ")) + continue; + if (sscanf(value, "cpu%d ", &cpunr) != 1) + continue; + if (cpunr > ret) + ret = cpunr; + } + fclose(fp); + + /* cpu count starts from 0, on error return 1 (UP) */ + return ret + 1; +} + + +static void proc_cpufreq_output(void) +{ + unsigned int cpu, nr_cpus; + struct cpufreq_policy *policy; + unsigned int min_pctg = 0; + unsigned int max_pctg = 0; + unsigned long min, max; + + printf(_(" minimum CPU frequency - maximum CPU frequency - governor\n")); + + nr_cpus = count_cpus(); + for (cpu = 0; cpu < nr_cpus; cpu++) { + policy = cpufreq_get_policy(cpu); + if (!policy) + continue; + + if (cpufreq_get_hardware_limits(cpu, &min, &max)) { + max = 0; + } else { + min_pctg = (policy->min * 100) / max; + max_pctg = (policy->max * 100) / max; + } + printf("CPU%3d %9lu kHz (%3d %%) - %9lu kHz (%3d %%) - %s\n", + cpu , policy->min, max ? min_pctg : 0, policy->max, + max ? max_pctg : 0, policy->governor); + + cpufreq_put_policy(policy); + } +} + +static int no_rounding; +static void print_speed(unsigned long speed) +{ + unsigned long tmp; + + if (no_rounding) { + if (speed > 1000000) + printf("%u.%06u GHz", ((unsigned int) speed/1000000), + ((unsigned int) speed%1000000)); + else if (speed > 1000) + printf("%u.%03u MHz", ((unsigned int) speed/1000), + (unsigned int) (speed%1000)); + else + printf("%lu kHz", speed); + } else { + if (speed > 1000000) { + tmp = speed%10000; + if (tmp >= 5000) + speed += 10000; + printf("%u.%02u GHz", ((unsigned int) speed/1000000), + ((unsigned int) (speed%1000000)/10000)); + } else if (speed > 100000) { + tmp = speed%1000; + if (tmp >= 500) + speed += 1000; + printf("%u MHz", ((unsigned int) speed/1000)); + } else if (speed > 1000) { + tmp = speed%100; + if (tmp >= 50) + speed += 100; + printf("%u.%01u MHz", ((unsigned int) speed/1000), + ((unsigned int) (speed%1000)/100)); + } + } + + return; +} + +static void print_duration(unsigned long duration) +{ + unsigned long tmp; + + if (no_rounding) { + if (duration > 1000000) + printf("%u.%06u ms", ((unsigned int) duration/1000000), + ((unsigned int) duration%1000000)); + else if (duration > 100000) + printf("%u us", ((unsigned int) duration/1000)); + else if (duration > 1000) + printf("%u.%03u us", ((unsigned int) duration/1000), + ((unsigned int) duration%1000)); + else + printf("%lu ns", duration); + } else { + if (duration > 1000000) { + tmp = duration%10000; + if (tmp >= 5000) + duration += 10000; + printf("%u.%02u ms", ((unsigned int) duration/1000000), + ((unsigned int) (duration%1000000)/10000)); + } else if (duration > 100000) { + tmp = duration%1000; + if (tmp >= 500) + duration += 1000; + printf("%u us", ((unsigned int) duration / 1000)); + } else if (duration > 1000) { + tmp = duration%100; + if (tmp >= 50) + duration += 100; + printf("%u.%01u us", ((unsigned int) duration/1000), + ((unsigned int) (duration%1000)/100)); + } else + printf("%lu ns", duration); + } + return; +} + +static int get_boost_mode_x86(unsigned int cpu) +{ + int support, active, b_states = 0, ret, pstate_no, i; + /* ToDo: Make this more global */ + unsigned long pstates[MAX_HW_PSTATES] = {0,}; + + ret = cpufreq_has_boost_support(cpu, &support, &active, &b_states); + if (ret) { + printf(_("Error while evaluating Boost Capabilities" + " on CPU %d -- are you root?\n"), cpu); + return ret; + } + /* P state changes via MSR are identified via cpuid 80000007 + on Intel and AMD, but we assume boost capable machines can do that + if (cpuid_eax(0x80000000) >= 0x80000007 + && (cpuid_edx(0x80000007) & (1 << 7))) + */ + + printf(_(" boost state support:\n")); + + printf(_(" Supported: %s\n"), support ? _("yes") : _("no")); + printf(_(" Active: %s\n"), active ? _("yes") : _("no")); + + if ((cpupower_cpu_info.vendor == X86_VENDOR_AMD && + cpupower_cpu_info.family >= 0x10) || + cpupower_cpu_info.vendor == X86_VENDOR_HYGON) { + ret = decode_pstates(cpu, cpupower_cpu_info.family, b_states, + pstates, &pstate_no); + if (ret) + return ret; + + printf(_(" Boost States: %d\n"), b_states); + printf(_(" Total States: %d\n"), pstate_no); + for (i = 0; i < pstate_no; i++) { + if (!pstates[i]) + continue; + if (i < b_states) + printf(_(" Pstate-Pb%d: %luMHz (boost state)" + "\n"), i, pstates[i]); + else + printf(_(" Pstate-P%d: %luMHz\n"), + i - b_states, pstates[i]); + } + } else if (cpupower_cpu_info.caps & CPUPOWER_CAP_HAS_TURBO_RATIO) { + double bclk; + unsigned long long intel_turbo_ratio = 0; + unsigned int ratio; + + /* Any way to autodetect this ? */ + if (cpupower_cpu_info.caps & CPUPOWER_CAP_IS_SNB) + bclk = 100.00; + else + bclk = 133.33; + intel_turbo_ratio = msr_intel_get_turbo_ratio(cpu); + dprint (" Ratio: 0x%llx - bclk: %f\n", + intel_turbo_ratio, bclk); + + ratio = (intel_turbo_ratio >> 24) & 0xFF; + if (ratio) + printf(_(" %.0f MHz max turbo 4 active cores\n"), + ratio * bclk); + + ratio = (intel_turbo_ratio >> 16) & 0xFF; + if (ratio) + printf(_(" %.0f MHz max turbo 3 active cores\n"), + ratio * bclk); + + ratio = (intel_turbo_ratio >> 8) & 0xFF; + if (ratio) + printf(_(" %.0f MHz max turbo 2 active cores\n"), + ratio * bclk); + + ratio = (intel_turbo_ratio >> 0) & 0xFF; + if (ratio) + printf(_(" %.0f MHz max turbo 1 active cores\n"), + ratio * bclk); + } + return 0; +} + +/* --boost / -b */ + +static int get_boost_mode(unsigned int cpu) +{ + struct cpufreq_available_frequencies *freqs; + + if (cpupower_cpu_info.vendor == X86_VENDOR_AMD || + cpupower_cpu_info.vendor == X86_VENDOR_HYGON || + cpupower_cpu_info.vendor == X86_VENDOR_INTEL) + return get_boost_mode_x86(cpu); + + freqs = cpufreq_get_boost_frequencies(cpu); + if (freqs) { + printf(_(" boost frequency steps: ")); + while (freqs->next) { + print_speed(freqs->frequency); + printf(", "); + freqs = freqs->next; + } + print_speed(freqs->frequency); + printf("\n"); + cpufreq_put_available_frequencies(freqs); + } + + return 0; +} + +/* --freq / -f */ + +static int get_freq_kernel(unsigned int cpu, unsigned int human) +{ + unsigned long freq = cpufreq_get_freq_kernel(cpu); + printf(_(" current CPU frequency: ")); + if (!freq) { + printf(_(" Unable to call to kernel\n")); + return -EINVAL; + } + if (human) { + print_speed(freq); + } else + printf("%lu", freq); + printf(_(" (asserted by call to kernel)\n")); + return 0; +} + + +/* --hwfreq / -w */ + +static int get_freq_hardware(unsigned int cpu, unsigned int human) +{ + unsigned long freq = cpufreq_get_freq_hardware(cpu); + printf(_(" current CPU frequency: ")); + if (!freq) { + printf("Unable to call hardware\n"); + return -EINVAL; + } + if (human) { + print_speed(freq); + } else + printf("%lu", freq); + printf(_(" (asserted by call to hardware)\n")); + return 0; +} + +/* --hwlimits / -l */ + +static int get_hardware_limits(unsigned int cpu, unsigned int human) +{ + unsigned long min, max; + + if (cpufreq_get_hardware_limits(cpu, &min, &max)) { + printf(_("Not Available\n")); + return -EINVAL; + } + + if (human) { + printf(_(" hardware limits: ")); + print_speed(min); + printf(" - "); + print_speed(max); + printf("\n"); + } else { + printf("%lu %lu\n", min, max); + } + return 0; +} + +/* --driver / -d */ + +static int get_driver(unsigned int cpu) +{ + char *driver = cpufreq_get_driver(cpu); + if (!driver) { + printf(_(" no or unknown cpufreq driver is active on this CPU\n")); + return -EINVAL; + } + printf(" driver: %s\n", driver); + cpufreq_put_driver(driver); + return 0; +} + +/* --policy / -p */ + +static int get_policy(unsigned int cpu) +{ + struct cpufreq_policy *policy = cpufreq_get_policy(cpu); + if (!policy) { + printf(_(" Unable to determine current policy\n")); + return -EINVAL; + } + printf(_(" current policy: frequency should be within ")); + print_speed(policy->min); + printf(_(" and ")); + print_speed(policy->max); + + printf(".\n "); + printf(_("The governor \"%s\" may decide which speed to use\n" + " within this range.\n"), + policy->governor); + cpufreq_put_policy(policy); + return 0; +} + +/* --governors / -g */ + +static int get_available_governors(unsigned int cpu) +{ + struct cpufreq_available_governors *governors = + cpufreq_get_available_governors(cpu); + + printf(_(" available cpufreq governors: ")); + if (!governors) { + printf(_("Not Available\n")); + return -EINVAL; + } + + while (governors->next) { + printf("%s ", governors->governor); + governors = governors->next; + } + printf("%s\n", governors->governor); + cpufreq_put_available_governors(governors); + return 0; +} + + +/* --affected-cpus / -a */ + +static int get_affected_cpus(unsigned int cpu) +{ + struct cpufreq_affected_cpus *cpus = cpufreq_get_affected_cpus(cpu); + + printf(_(" CPUs which need to have their frequency coordinated by software: ")); + if (!cpus) { + printf(_("Not Available\n")); + return -EINVAL; + } + + while (cpus->next) { + printf("%d ", cpus->cpu); + cpus = cpus->next; + } + printf("%d\n", cpus->cpu); + cpufreq_put_affected_cpus(cpus); + return 0; +} + +/* --related-cpus / -r */ + +static int get_related_cpus(unsigned int cpu) +{ + struct cpufreq_affected_cpus *cpus = cpufreq_get_related_cpus(cpu); + + printf(_(" CPUs which run at the same hardware frequency: ")); + if (!cpus) { + printf(_("Not Available\n")); + return -EINVAL; + } + + while (cpus->next) { + printf("%d ", cpus->cpu); + cpus = cpus->next; + } + printf("%d\n", cpus->cpu); + cpufreq_put_related_cpus(cpus); + return 0; +} + +/* --stats / -s */ + +static int get_freq_stats(unsigned int cpu, unsigned int human) +{ + unsigned long total_trans = cpufreq_get_transitions(cpu); + unsigned long long total_time; + struct cpufreq_stats *stats = cpufreq_get_stats(cpu, &total_time); + while (stats) { + if (human) { + print_speed(stats->frequency); + printf(":%.2f%%", + (100.0 * stats->time_in_state) / total_time); + } else + printf("%lu:%llu", + stats->frequency, stats->time_in_state); + stats = stats->next; + if (stats) + printf(", "); + } + cpufreq_put_stats(stats); + if (total_trans) + printf(" (%lu)\n", total_trans); + return 0; +} + +/* --latency / -y */ + +static int get_latency(unsigned int cpu, unsigned int human) +{ + unsigned long latency = cpufreq_get_transition_latency(cpu); + + printf(_(" maximum transition latency: ")); + if (!latency || latency == UINT_MAX) { + printf(_(" Cannot determine or is not supported.\n")); + return -EINVAL; + } + + if (human) { + print_duration(latency); + printf("\n"); + } else + printf("%lu\n", latency); + return 0; +} + +static void debug_output_one(unsigned int cpu) +{ + struct cpufreq_available_frequencies *freqs; + + get_driver(cpu); + get_related_cpus(cpu); + get_affected_cpus(cpu); + get_latency(cpu, 1); + get_hardware_limits(cpu, 1); + + freqs = cpufreq_get_available_frequencies(cpu); + if (freqs) { + printf(_(" available frequency steps: ")); + while (freqs->next) { + print_speed(freqs->frequency); + printf(", "); + freqs = freqs->next; + } + print_speed(freqs->frequency); + printf("\n"); + cpufreq_put_available_frequencies(freqs); + } + + get_available_governors(cpu); + get_policy(cpu); + if (get_freq_hardware(cpu, 1) < 0) + get_freq_kernel(cpu, 1); + get_boost_mode(cpu); +} + +static struct option info_opts[] = { + {"debug", no_argument, NULL, 'e'}, + {"boost", no_argument, NULL, 'b'}, + {"freq", no_argument, NULL, 'f'}, + {"hwfreq", no_argument, NULL, 'w'}, + {"hwlimits", no_argument, NULL, 'l'}, + {"driver", no_argument, NULL, 'd'}, + {"policy", no_argument, NULL, 'p'}, + {"governors", no_argument, NULL, 'g'}, + {"related-cpus", no_argument, NULL, 'r'}, + {"affected-cpus", no_argument, NULL, 'a'}, + {"stats", no_argument, NULL, 's'}, + {"latency", no_argument, NULL, 'y'}, + {"proc", no_argument, NULL, 'o'}, + {"human", no_argument, NULL, 'm'}, + {"no-rounding", no_argument, NULL, 'n'}, + { }, +}; + +int cmd_freq_info(int argc, char **argv) +{ + extern char *optarg; + extern int optind, opterr, optopt; + int ret = 0, cont = 1; + unsigned int cpu = 0; + unsigned int human = 0; + int output_param = 0; + + do { + ret = getopt_long(argc, argv, "oefwldpgrasmybn", info_opts, + NULL); + switch (ret) { + case '?': + output_param = '?'; + cont = 0; + break; + case -1: + cont = 0; + break; + case 'b': + case 'o': + case 'a': + case 'r': + case 'g': + case 'p': + case 'd': + case 'l': + case 'w': + case 'f': + case 'e': + case 's': + case 'y': + if (output_param) { + output_param = -1; + cont = 0; + break; + } + output_param = ret; + break; + case 'm': + if (human) { + output_param = -1; + cont = 0; + break; + } + human = 1; + break; + case 'n': + no_rounding = 1; + break; + default: + fprintf(stderr, "invalid or unknown argument\n"); + return EXIT_FAILURE; + } + } while (cont); + + switch (output_param) { + case 'o': + if (!bitmask_isallclear(cpus_chosen)) { + printf(_("The argument passed to this tool can't be " + "combined with passing a --cpu argument\n")); + return -EINVAL; + } + break; + case 0: + output_param = 'e'; + } + + ret = 0; + + /* Default is: show output of CPU 0 only */ + if (bitmask_isallclear(cpus_chosen)) + bitmask_setbit(cpus_chosen, 0); + + switch (output_param) { + case -1: + printf(_("You can't specify more than one --cpu parameter and/or\n" + "more than one output-specific argument\n")); + return -EINVAL; + case '?': + printf(_("invalid or unknown argument\n")); + return -EINVAL; + case 'o': + proc_cpufreq_output(); + return EXIT_SUCCESS; + } + + for (cpu = bitmask_first(cpus_chosen); + cpu <= bitmask_last(cpus_chosen); cpu++) { + + if (!bitmask_isbitset(cpus_chosen, cpu)) + continue; + + printf(_("analyzing CPU %d:\n"), cpu); + + if (sysfs_is_cpu_online(cpu) != 1) { + printf(_(" *is offline\n")); + printf("\n"); + continue; + } + + switch (output_param) { + case 'b': + get_boost_mode(cpu); + break; + case 'e': + debug_output_one(cpu); + break; + case 'a': + ret = get_affected_cpus(cpu); + break; + case 'r': + ret = get_related_cpus(cpu); + break; + case 'g': + ret = get_available_governors(cpu); + break; + case 'p': + ret = get_policy(cpu); + break; + case 'd': + ret = get_driver(cpu); + break; + case 'l': + ret = get_hardware_limits(cpu, human); + break; + case 'w': + ret = get_freq_hardware(cpu, human); + break; + case 'f': + ret = get_freq_kernel(cpu, human); + break; + case 's': + ret = get_freq_stats(cpu, human); + break; + case 'y': + ret = get_latency(cpu, human); + break; + } + if (ret) + return ret; + } + return ret; +} diff --git a/tools/power/cpupower/utils/cpufreq-set.c b/tools/power/cpupower/utils/cpufreq-set.c new file mode 100644 index 000000000..7b2164e07 --- /dev/null +++ b/tools/power/cpupower/utils/cpufreq-set.c @@ -0,0 +1,336 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * (C) 2004-2009 Dominik Brodowski <linux@dominikbrodowski.de> + */ + + +#include <unistd.h> +#include <stdio.h> +#include <errno.h> +#include <stdlib.h> +#include <limits.h> +#include <string.h> +#include <ctype.h> + +#include <getopt.h> + +#include "cpufreq.h" +#include "cpuidle.h" +#include "helpers/helpers.h" + +#define NORM_FREQ_LEN 32 + +static struct option set_opts[] = { + {"min", required_argument, NULL, 'd'}, + {"max", required_argument, NULL, 'u'}, + {"governor", required_argument, NULL, 'g'}, + {"freq", required_argument, NULL, 'f'}, + {"related", no_argument, NULL, 'r'}, + { }, +}; + +static void print_error(void) +{ + printf(_("Error setting new values. Common errors:\n" + "- Do you have proper administration rights? (super-user?)\n" + "- Is the governor you requested available and modprobed?\n" + "- Trying to set an invalid policy?\n" + "- Trying to set a specific frequency, but userspace governor is not available,\n" + " for example because of hardware which cannot be set to a specific frequency\n" + " or because the userspace governor isn't loaded?\n")); +}; + +struct freq_units { + char *str_unit; + int power_of_ten; +}; + +const struct freq_units def_units[] = { + {"hz", -3}, + {"khz", 0}, /* default */ + {"mhz", 3}, + {"ghz", 6}, + {"thz", 9}, + {NULL, 0} +}; + +static void print_unknown_arg(void) +{ + printf(_("invalid or unknown argument\n")); +} + +static unsigned long string_to_frequency(const char *str) +{ + char normalized[NORM_FREQ_LEN]; + const struct freq_units *unit; + const char *scan; + char *end; + unsigned long freq; + int power = 0, match_count = 0, i, cp, pad; + + while (*str == '0') + str++; + + for (scan = str; isdigit(*scan) || *scan == '.'; scan++) { + if (*scan == '.' && match_count == 0) + match_count = 1; + else if (*scan == '.' && match_count == 1) + return 0; + } + + if (*scan) { + match_count = 0; + for (unit = def_units; unit->str_unit; unit++) { + for (i = 0; + scan[i] && tolower(scan[i]) == unit->str_unit[i]; + ++i) + continue; + if (scan[i]) + continue; + match_count++; + power = unit->power_of_ten; + } + if (match_count != 1) + return 0; + } + + /* count the number of digits to be copied */ + for (cp = 0; isdigit(str[cp]); cp++) + continue; + + if (str[cp] == '.') { + while (power > -1 && isdigit(str[cp+1])) { + cp++; + power--; + } + } + if (power >= -1) { /* not enough => pad */ + pad = power + 1; + } else { /* too much => strip */ + pad = 0; + cp += power + 1; + } + /* check bounds */ + if (cp <= 0 || cp + pad > NORM_FREQ_LEN - 1) + return 0; + + /* copy digits */ + for (i = 0; i < cp; i++, str++) { + if (*str == '.') + str++; + normalized[i] = *str; + } + /* and pad */ + for (; i < cp + pad; i++) + normalized[i] = '0'; + + /* round up, down ? */ + match_count = (normalized[i-1] >= '5'); + /* and drop the decimal part */ + normalized[i-1] = 0; /* cp > 0 && pad >= 0 ==> i > 0 */ + + /* final conversion (and applying rounding) */ + errno = 0; + freq = strtoul(normalized, &end, 10); + if (errno) + return 0; + else { + if (match_count && freq != ULONG_MAX) + freq++; + return freq; + } +} + +static int do_new_policy(unsigned int cpu, struct cpufreq_policy *new_pol) +{ + struct cpufreq_policy *cur_pol = cpufreq_get_policy(cpu); + int ret; + + if (!cur_pol) { + printf(_("wrong, unknown or unhandled CPU?\n")); + return -EINVAL; + } + + if (!new_pol->min) + new_pol->min = cur_pol->min; + + if (!new_pol->max) + new_pol->max = cur_pol->max; + + if (!new_pol->governor) + new_pol->governor = cur_pol->governor; + + ret = cpufreq_set_policy(cpu, new_pol); + + cpufreq_put_policy(cur_pol); + + return ret; +} + + +static int do_one_cpu(unsigned int cpu, struct cpufreq_policy *new_pol, + unsigned long freq, unsigned int pc) +{ + switch (pc) { + case 0: + return cpufreq_set_frequency(cpu, freq); + + case 1: + /* if only one value of a policy is to be changed, we can + * use a "fast path". + */ + if (new_pol->min) + return cpufreq_modify_policy_min(cpu, new_pol->min); + else if (new_pol->max) + return cpufreq_modify_policy_max(cpu, new_pol->max); + else if (new_pol->governor) + return cpufreq_modify_policy_governor(cpu, + new_pol->governor); + + default: + /* slow path */ + return do_new_policy(cpu, new_pol); + } +} + +int cmd_freq_set(int argc, char **argv) +{ + extern char *optarg; + extern int optind, opterr, optopt; + int ret = 0, cont = 1; + int double_parm = 0, related = 0, policychange = 0; + unsigned long freq = 0; + char gov[20]; + unsigned int cpu; + + struct cpufreq_policy new_pol = { + .min = 0, + .max = 0, + .governor = NULL, + }; + + /* parameter parsing */ + do { + ret = getopt_long(argc, argv, "d:u:g:f:r", set_opts, NULL); + switch (ret) { + case '?': + print_unknown_arg(); + return -EINVAL; + case -1: + cont = 0; + break; + case 'r': + if (related) + double_parm++; + related++; + break; + case 'd': + if (new_pol.min) + double_parm++; + policychange++; + new_pol.min = string_to_frequency(optarg); + if (new_pol.min == 0) { + print_unknown_arg(); + return -EINVAL; + } + break; + case 'u': + if (new_pol.max) + double_parm++; + policychange++; + new_pol.max = string_to_frequency(optarg); + if (new_pol.max == 0) { + print_unknown_arg(); + return -EINVAL; + } + break; + case 'f': + if (freq) + double_parm++; + freq = string_to_frequency(optarg); + if (freq == 0) { + print_unknown_arg(); + return -EINVAL; + } + break; + case 'g': + if (new_pol.governor) + double_parm++; + policychange++; + if ((strlen(optarg) < 3) || (strlen(optarg) > 18)) { + print_unknown_arg(); + return -EINVAL; + } + if ((sscanf(optarg, "%19s", gov)) != 1) { + print_unknown_arg(); + return -EINVAL; + } + new_pol.governor = gov; + break; + } + } while (cont); + + /* parameter checking */ + if (double_parm) { + printf("the same parameter was passed more than once\n"); + return -EINVAL; + } + + if (freq && policychange) { + printf(_("the -f/--freq parameter cannot be combined with -d/--min, -u/--max or\n" + "-g/--governor parameters\n")); + return -EINVAL; + } + + if (!freq && !policychange) { + printf(_("At least one parameter out of -f/--freq, -d/--min, -u/--max, and\n" + "-g/--governor must be passed\n")); + return -EINVAL; + } + + /* Default is: set all CPUs */ + if (bitmask_isallclear(cpus_chosen)) + bitmask_setall(cpus_chosen); + + /* Also set frequency settings for related CPUs if -r is passed */ + if (related) { + for (cpu = bitmask_first(cpus_chosen); + cpu <= bitmask_last(cpus_chosen); cpu++) { + struct cpufreq_affected_cpus *cpus; + + if (!bitmask_isbitset(cpus_chosen, cpu) || + cpupower_is_cpu_online(cpu) != 1) + continue; + + cpus = cpufreq_get_related_cpus(cpu); + if (!cpus) + break; + while (cpus->next) { + bitmask_setbit(cpus_chosen, cpus->cpu); + cpus = cpus->next; + } + /* Set the last cpu in related cpus list */ + bitmask_setbit(cpus_chosen, cpus->cpu); + cpufreq_put_related_cpus(cpus); + } + } + + + /* loop over CPUs */ + for (cpu = bitmask_first(cpus_chosen); + cpu <= bitmask_last(cpus_chosen); cpu++) { + + if (!bitmask_isbitset(cpus_chosen, cpu) || + cpupower_is_cpu_online(cpu) != 1) + continue; + + printf(_("Setting cpu: %d\n"), cpu); + ret = do_one_cpu(cpu, &new_pol, freq, policychange); + if (ret) { + print_error(); + return ret; + } + } + + return 0; +} diff --git a/tools/power/cpupower/utils/cpuidle-info.c b/tools/power/cpupower/utils/cpuidle-info.c new file mode 100644 index 000000000..f2b202c55 --- /dev/null +++ b/tools/power/cpupower/utils/cpuidle-info.c @@ -0,0 +1,213 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * (C) 2004-2009 Dominik Brodowski <linux@dominikbrodowski.de> + * (C) 2010 Thomas Renninger <trenn@suse.de> + */ + + +#include <unistd.h> +#include <stdio.h> +#include <errno.h> +#include <stdlib.h> +#include <string.h> +#include <getopt.h> + +#include <cpuidle.h> + +#include "helpers/sysfs.h" +#include "helpers/helpers.h" +#include "helpers/bitmask.h" + +#define LINE_LEN 10 + +static void cpuidle_cpu_output(unsigned int cpu, int verbose) +{ + unsigned int idlestates, idlestate; + char *tmp; + + idlestates = cpuidle_state_count(cpu); + if (idlestates == 0) { + printf(_("CPU %u: No idle states\n"), cpu); + return; + } + + printf(_("Number of idle states: %d\n"), idlestates); + printf(_("Available idle states:")); + for (idlestate = 0; idlestate < idlestates; idlestate++) { + tmp = cpuidle_state_name(cpu, idlestate); + if (!tmp) + continue; + printf(" %s", tmp); + free(tmp); + } + printf("\n"); + + if (!verbose) + return; + + for (idlestate = 0; idlestate < idlestates; idlestate++) { + int disabled = cpuidle_is_state_disabled(cpu, idlestate); + /* Disabled interface not supported on older kernels */ + if (disabled < 0) + disabled = 0; + tmp = cpuidle_state_name(cpu, idlestate); + if (!tmp) + continue; + printf("%s%s:\n", tmp, (disabled) ? " (DISABLED) " : ""); + free(tmp); + + tmp = cpuidle_state_desc(cpu, idlestate); + if (!tmp) + continue; + printf(_("Flags/Description: %s\n"), tmp); + free(tmp); + + printf(_("Latency: %lu\n"), + cpuidle_state_latency(cpu, idlestate)); + printf(_("Usage: %lu\n"), + cpuidle_state_usage(cpu, idlestate)); + printf(_("Duration: %llu\n"), + cpuidle_state_time(cpu, idlestate)); + } +} + +static void cpuidle_general_output(void) +{ + char *tmp; + + tmp = cpuidle_get_driver(); + if (!tmp) { + printf(_("Could not determine cpuidle driver\n")); + return; + } + + printf(_("CPUidle driver: %s\n"), tmp); + free(tmp); + + tmp = cpuidle_get_governor(); + if (!tmp) { + printf(_("Could not determine cpuidle governor\n")); + return; + } + + printf(_("CPUidle governor: %s\n"), tmp); + free(tmp); +} + +static void proc_cpuidle_cpu_output(unsigned int cpu) +{ + long max_allowed_cstate = 2000000000; + unsigned int cstate, cstates; + + cstates = cpuidle_state_count(cpu); + if (cstates == 0) { + printf(_("CPU %u: No C-states info\n"), cpu); + return; + } + + printf(_("active state: C0\n")); + printf(_("max_cstate: C%u\n"), cstates-1); + printf(_("maximum allowed latency: %lu usec\n"), max_allowed_cstate); + printf(_("states:\t\n")); + for (cstate = 1; cstate < cstates; cstate++) { + printf(_(" C%d: " + "type[C%d] "), cstate, cstate); + printf(_("promotion[--] demotion[--] ")); + printf(_("latency[%03lu] "), + cpuidle_state_latency(cpu, cstate)); + printf(_("usage[%08lu] "), + cpuidle_state_usage(cpu, cstate)); + printf(_("duration[%020Lu] \n"), + cpuidle_state_time(cpu, cstate)); + } +} + +static struct option info_opts[] = { + {"silent", no_argument, NULL, 's'}, + {"proc", no_argument, NULL, 'o'}, + { }, +}; + +static inline void cpuidle_exit(int fail) +{ + exit(EXIT_FAILURE); +} + +int cmd_idle_info(int argc, char **argv) +{ + extern char *optarg; + extern int optind, opterr, optopt; + int ret = 0, cont = 1, output_param = 0, verbose = 1; + unsigned int cpu = 0; + + do { + ret = getopt_long(argc, argv, "os", info_opts, NULL); + if (ret == -1) + break; + switch (ret) { + case '?': + output_param = '?'; + cont = 0; + break; + case 's': + verbose = 0; + break; + case -1: + cont = 0; + break; + case 'o': + if (output_param) { + output_param = -1; + cont = 0; + break; + } + output_param = ret; + break; + } + } while (cont); + + switch (output_param) { + case -1: + printf(_("You can't specify more than one " + "output-specific argument\n")); + cpuidle_exit(EXIT_FAILURE); + case '?': + printf(_("invalid or unknown argument\n")); + cpuidle_exit(EXIT_FAILURE); + } + + /* Default is: show output of CPU 0 only */ + if (bitmask_isallclear(cpus_chosen)) + bitmask_setbit(cpus_chosen, 0); + + if (output_param == 0) + cpuidle_general_output(); + + for (cpu = bitmask_first(cpus_chosen); + cpu <= bitmask_last(cpus_chosen); cpu++) { + + if (!bitmask_isbitset(cpus_chosen, cpu)) + continue; + + printf(_("analyzing CPU %d:\n"), cpu); + + if (sysfs_is_cpu_online(cpu) != 1) { + printf(_(" *is offline\n")); + printf("\n"); + continue; + } + + switch (output_param) { + + case 'o': + proc_cpuidle_cpu_output(cpu); + break; + case 0: + printf("\n"); + cpuidle_cpu_output(cpu, verbose); + break; + } + printf("\n"); + } + return EXIT_SUCCESS; +} diff --git a/tools/power/cpupower/utils/cpuidle-set.c b/tools/power/cpupower/utils/cpuidle-set.c new file mode 100644 index 000000000..569f268f4 --- /dev/null +++ b/tools/power/cpupower/utils/cpuidle-set.c @@ -0,0 +1,185 @@ +// SPDX-License-Identifier: GPL-2.0 +#include <unistd.h> +#include <stdio.h> +#include <errno.h> +#include <stdlib.h> +#include <limits.h> +#include <string.h> +#include <ctype.h> +#include <getopt.h> + +#include <cpufreq.h> +#include <cpuidle.h> + +#include "helpers/helpers.h" + +static struct option info_opts[] = { + {"disable", required_argument, NULL, 'd'}, + {"enable", required_argument, NULL, 'e'}, + {"disable-by-latency", required_argument, NULL, 'D'}, + {"enable-all", no_argument, NULL, 'E'}, + { }, +}; + + +int cmd_idle_set(int argc, char **argv) +{ + extern char *optarg; + extern int optind, opterr, optopt; + int ret = 0, cont = 1, param = 0, disabled; + unsigned long long latency = 0, state_latency; + unsigned int cpu = 0, idlestate = 0, idlestates = 0; + char *endptr; + + do { + ret = getopt_long(argc, argv, "d:e:ED:", info_opts, NULL); + if (ret == -1) + break; + switch (ret) { + case '?': + param = '?'; + cont = 0; + break; + case 'd': + if (param) { + param = -1; + cont = 0; + break; + } + param = ret; + idlestate = atoi(optarg); + break; + case 'e': + if (param) { + param = -1; + cont = 0; + break; + } + param = ret; + idlestate = atoi(optarg); + break; + case 'D': + if (param) { + param = -1; + cont = 0; + break; + } + param = ret; + latency = strtoull(optarg, &endptr, 10); + if (*endptr != '\0') { + printf(_("Bad latency value: %s\n"), optarg); + exit(EXIT_FAILURE); + } + break; + case 'E': + if (param) { + param = -1; + cont = 0; + break; + } + param = ret; + break; + case -1: + cont = 0; + break; + } + } while (cont); + + switch (param) { + case -1: + printf(_("You can't specify more than one " + "output-specific argument\n")); + exit(EXIT_FAILURE); + case '?': + printf(_("invalid or unknown argument\n")); + exit(EXIT_FAILURE); + } + + /* Default is: set all CPUs */ + if (bitmask_isallclear(cpus_chosen)) + bitmask_setall(cpus_chosen); + + for (cpu = bitmask_first(cpus_chosen); + cpu <= bitmask_last(cpus_chosen); cpu++) { + + if (!bitmask_isbitset(cpus_chosen, cpu)) + continue; + + if (cpupower_is_cpu_online(cpu) != 1) + continue; + + idlestates = cpuidle_state_count(cpu); + if (idlestates <= 0) + continue; + + switch (param) { + case 'd': + ret = cpuidle_state_disable(cpu, idlestate, 1); + if (ret == 0) + printf(_("Idlestate %u disabled on CPU %u\n"), idlestate, cpu); + else if (ret == -1) + printf(_("Idlestate %u not available on CPU %u\n"), + idlestate, cpu); + else if (ret == -2) + printf(_("Idlestate disabling not supported by kernel\n")); + else + printf(_("Idlestate %u not disabled on CPU %u\n"), + idlestate, cpu); + break; + case 'e': + ret = cpuidle_state_disable(cpu, idlestate, 0); + if (ret == 0) + printf(_("Idlestate %u enabled on CPU %u\n"), idlestate, cpu); + else if (ret == -1) + printf(_("Idlestate %u not available on CPU %u\n"), + idlestate, cpu); + else if (ret == -2) + printf(_("Idlestate enabling not supported by kernel\n")); + else + printf(_("Idlestate %u not enabled on CPU %u\n"), + idlestate, cpu); + break; + case 'D': + for (idlestate = 0; idlestate < idlestates; idlestate++) { + disabled = cpuidle_is_state_disabled + (cpu, idlestate); + state_latency = cpuidle_state_latency + (cpu, idlestate); + if (disabled == 1) { + if (latency > state_latency){ + ret = cpuidle_state_disable + (cpu, idlestate, 0); + if (ret == 0) + printf(_("Idlestate %u enabled on CPU %u\n"), idlestate, cpu); + } + continue; + } + if (latency <= state_latency){ + ret = cpuidle_state_disable + (cpu, idlestate, 1); + if (ret == 0) + printf(_("Idlestate %u disabled on CPU %u\n"), idlestate, cpu); + } + } + break; + case 'E': + for (idlestate = 0; idlestate < idlestates; idlestate++) { + disabled = cpuidle_is_state_disabled + (cpu, idlestate); + if (disabled == 1) { + ret = cpuidle_state_disable + (cpu, idlestate, 0); + if (ret == 0) + printf(_("Idlestate %u enabled on CPU %u\n"), idlestate, cpu); + } + } + break; + default: + /* Not reachable with proper args checking */ + printf(_("Invalid or unknown argument\n")); + exit(EXIT_FAILURE); + break; + } + } + return EXIT_SUCCESS; +} diff --git a/tools/power/cpupower/utils/cpupower-info.c b/tools/power/cpupower/utils/cpupower-info.c new file mode 100644 index 000000000..0ba61a2c4 --- /dev/null +++ b/tools/power/cpupower/utils/cpupower-info.c @@ -0,0 +1,114 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * (C) 2011 Thomas Renninger <trenn@suse.de>, Novell Inc. + */ + + +#include <unistd.h> +#include <stdio.h> +#include <stdlib.h> +#include <errno.h> +#include <string.h> +#include <getopt.h> +#include <sys/utsname.h> + +#include "helpers/helpers.h" +#include "helpers/sysfs.h" + +static struct option set_opts[] = { + {"perf-bias", optional_argument, NULL, 'b'}, + { }, +}; + +static void print_wrong_arg_exit(void) +{ + printf(_("invalid or unknown argument\n")); + exit(EXIT_FAILURE); +} + +int cmd_info(int argc, char **argv) +{ + extern char *optarg; + extern int optind, opterr, optopt; + unsigned int cpu; + struct utsname uts; + + union { + struct { + int perf_bias:1; + }; + int params; + } params = {}; + int ret = 0; + + ret = uname(&uts); + if (!ret && (!strcmp(uts.machine, "ppc64le") || + !strcmp(uts.machine, "ppc64"))) { + fprintf(stderr, _("Subcommand not supported on POWER.\n")); + return ret; + } + + setlocale(LC_ALL, ""); + textdomain(PACKAGE); + + /* parameter parsing */ + while ((ret = getopt_long(argc, argv, "b", set_opts, NULL)) != -1) { + switch (ret) { + case 'b': + if (params.perf_bias) + print_wrong_arg_exit(); + params.perf_bias = 1; + break; + default: + print_wrong_arg_exit(); + } + } + + if (!params.params) + params.params = 0x7; + + /* Default is: show output of CPU 0 only */ + if (bitmask_isallclear(cpus_chosen)) + bitmask_setbit(cpus_chosen, 0); + + /* Add more per cpu options here */ + if (!params.perf_bias) + return ret; + + if (params.perf_bias) { + if (!run_as_root) { + params.perf_bias = 0; + printf(_("Intel's performance bias setting needs root privileges\n")); + } else if (!(cpupower_cpu_info.caps & CPUPOWER_CAP_PERF_BIAS)) { + printf(_("System does not support Intel's performance" + " bias setting\n")); + params.perf_bias = 0; + } + } + + /* loop over CPUs */ + for (cpu = bitmask_first(cpus_chosen); + cpu <= bitmask_last(cpus_chosen); cpu++) { + + if (!bitmask_isbitset(cpus_chosen, cpu)) + continue; + + printf(_("analyzing CPU %d:\n"), cpu); + + if (sysfs_is_cpu_online(cpu) != 1){ + printf(_(" *is offline\n")); + continue; + } + + if (params.perf_bias) { + ret = msr_intel_get_perf_bias(cpu); + if (ret < 0) { + fprintf(stderr, + _("Could not read perf-bias value[%d]\n"), ret); + exit(EXIT_FAILURE); + } else + printf(_("perf-bias: %d\n"), ret); + } + } + return 0; +} diff --git a/tools/power/cpupower/utils/cpupower-set.c b/tools/power/cpupower/utils/cpupower-set.c new file mode 100644 index 000000000..052044d7e --- /dev/null +++ b/tools/power/cpupower/utils/cpupower-set.c @@ -0,0 +1,107 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * (C) 2011 Thomas Renninger <trenn@suse.de>, Novell Inc. + */ + + +#include <unistd.h> +#include <stdio.h> +#include <stdlib.h> +#include <errno.h> +#include <string.h> +#include <getopt.h> +#include <sys/utsname.h> + +#include "helpers/helpers.h" +#include "helpers/sysfs.h" +#include "helpers/bitmask.h" + +static struct option set_opts[] = { + {"perf-bias", required_argument, NULL, 'b'}, + { }, +}; + +static void print_wrong_arg_exit(void) +{ + printf(_("invalid or unknown argument\n")); + exit(EXIT_FAILURE); +} + +int cmd_set(int argc, char **argv) +{ + extern char *optarg; + extern int optind, opterr, optopt; + unsigned int cpu; + struct utsname uts; + + union { + struct { + int perf_bias:1; + }; + int params; + } params; + int perf_bias = 0; + int ret = 0; + + ret = uname(&uts); + if (!ret && (!strcmp(uts.machine, "ppc64le") || + !strcmp(uts.machine, "ppc64"))) { + fprintf(stderr, _("Subcommand not supported on POWER.\n")); + return ret; + } + + setlocale(LC_ALL, ""); + textdomain(PACKAGE); + + params.params = 0; + /* parameter parsing */ + while ((ret = getopt_long(argc, argv, "b:", + set_opts, NULL)) != -1) { + switch (ret) { + case 'b': + if (params.perf_bias) + print_wrong_arg_exit(); + perf_bias = atoi(optarg); + if (perf_bias < 0 || perf_bias > 15) { + printf(_("--perf-bias param out " + "of range [0-%d]\n"), 15); + print_wrong_arg_exit(); + } + params.perf_bias = 1; + break; + default: + print_wrong_arg_exit(); + } + } + + if (!params.params) + print_wrong_arg_exit(); + + /* Default is: set all CPUs */ + if (bitmask_isallclear(cpus_chosen)) + bitmask_setall(cpus_chosen); + + /* loop over CPUs */ + for (cpu = bitmask_first(cpus_chosen); + cpu <= bitmask_last(cpus_chosen); cpu++) { + + if (!bitmask_isbitset(cpus_chosen, cpu)) + continue; + + if (sysfs_is_cpu_online(cpu) != 1){ + fprintf(stderr, _("Cannot set values on CPU %d:"), cpu); + fprintf(stderr, _(" *is offline\n")); + continue; + } + + if (params.perf_bias) { + ret = msr_intel_set_perf_bias(cpu, perf_bias); + if (ret) { + fprintf(stderr, _("Error setting perf-bias " + "value on CPU %d\n"), cpu); + break; + } + } + } + return ret; +} diff --git a/tools/power/cpupower/utils/cpupower.c b/tools/power/cpupower/utils/cpupower.c new file mode 100644 index 000000000..8e3d08042 --- /dev/null +++ b/tools/power/cpupower/utils/cpupower.c @@ -0,0 +1,237 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * (C) 2010,2011 Thomas Renninger <trenn@suse.de>, Novell Inc. + * + * Ideas taken over from the perf userspace tool (included in the Linus + * kernel git repo): subcommand builtins and param parsing. + */ + +#include <stdio.h> +#include <stdlib.h> +#include <string.h> +#include <unistd.h> +#include <errno.h> +#include <sched.h> +#include <sys/types.h> +#include <sys/stat.h> +#include <sys/utsname.h> + +#include "builtin.h" +#include "helpers/helpers.h" +#include "helpers/bitmask.h" + +#define ARRAY_SIZE(x) (sizeof(x)/sizeof(x[0])) + +static int cmd_help(int argc, const char **argv); + +/* Global cpu_info object available for all binaries + * Info only retrieved from CPU 0 + * + * Values will be zero/unknown on non X86 archs + */ +struct cpupower_cpu_info cpupower_cpu_info; +int run_as_root; +int base_cpu; +/* Affected cpus chosen by -c/--cpu param */ +struct bitmask *cpus_chosen; + +#ifdef DEBUG +int be_verbose; +#endif + +static void print_help(void); + +struct cmd_struct { + const char *cmd; + int (*main)(int, const char **); + int needs_root; +}; + +static struct cmd_struct commands[] = { + { "frequency-info", cmd_freq_info, 0 }, + { "frequency-set", cmd_freq_set, 1 }, + { "idle-info", cmd_idle_info, 0 }, + { "idle-set", cmd_idle_set, 1 }, + { "set", cmd_set, 1 }, + { "info", cmd_info, 0 }, + { "monitor", cmd_monitor, 0 }, + { "help", cmd_help, 0 }, + /* { "bench", cmd_bench, 1 }, */ +}; + +static void print_help(void) +{ + unsigned int i; + +#ifdef DEBUG + printf(_("Usage:\tcpupower [-d|--debug] [-c|--cpu cpulist ] <command> [<args>]\n")); +#else + printf(_("Usage:\tcpupower [-c|--cpu cpulist ] <command> [<args>]\n")); +#endif + printf(_("Supported commands are:\n")); + for (i = 0; i < ARRAY_SIZE(commands); i++) + printf("\t%s\n", commands[i].cmd); + printf(_("\nNot all commands can make use of the -c cpulist option.\n")); + printf(_("\nUse 'cpupower help <command>' for getting help for above commands.\n")); +} + +static int print_man_page(const char *subpage) +{ + int len; + char *page; + + len = 10; /* enough for "cpupower-" */ + if (subpage != NULL) + len += strlen(subpage); + + page = malloc(len); + if (!page) + return -ENOMEM; + + sprintf(page, "cpupower"); + if ((subpage != NULL) && strcmp(subpage, "help")) { + strcat(page, "-"); + strcat(page, subpage); + } + + execlp("man", "man", page, NULL); + + /* should not be reached */ + return -EINVAL; +} + +static int cmd_help(int argc, const char **argv) +{ + if (argc > 1) { + print_man_page(argv[1]); /* exits within execlp() */ + return EXIT_FAILURE; + } + + print_help(); + return EXIT_SUCCESS; +} + +static void print_version(void) +{ + printf(PACKAGE " " VERSION "\n"); + printf(_("Report errors and bugs to %s, please.\n"), PACKAGE_BUGREPORT); +} + +static void handle_options(int *argc, const char ***argv) +{ + int ret, x, new_argc = 0; + + if (*argc < 1) + return; + + for (x = 0; x < *argc && ((*argv)[x])[0] == '-'; x++) { + const char *param = (*argv)[x]; + if (!strcmp(param, "-h") || !strcmp(param, "--help")) { + print_help(); + exit(EXIT_SUCCESS); + } else if (!strcmp(param, "-c") || !strcmp(param, "--cpu")) { + if (*argc < 2) { + print_help(); + exit(EXIT_FAILURE); + } + if (!strcmp((*argv)[x+1], "all")) + bitmask_setall(cpus_chosen); + else { + ret = bitmask_parselist( + (*argv)[x+1], cpus_chosen); + if (ret < 0) { + fprintf(stderr, _("Error parsing cpu " + "list\n")); + exit(EXIT_FAILURE); + } + } + x += 1; + /* Cut out param: cpupower -c 1 info -> cpupower info */ + new_argc += 2; + continue; + } else if (!strcmp(param, "-v") || + !strcmp(param, "--version")) { + print_version(); + exit(EXIT_SUCCESS); +#ifdef DEBUG + } else if (!strcmp(param, "-d") || !strcmp(param, "--debug")) { + be_verbose = 1; + new_argc++; + continue; +#endif + } else { + fprintf(stderr, "Unknown option: %s\n", param); + print_help(); + exit(EXIT_FAILURE); + } + } + *argc -= new_argc; + *argv += new_argc; +} + +int main(int argc, const char *argv[]) +{ + const char *cmd; + unsigned int i, ret; + struct stat statbuf; + struct utsname uts; + char pathname[32]; + + cpus_chosen = bitmask_alloc(sysconf(_SC_NPROCESSORS_CONF)); + + argc--; + argv += 1; + + handle_options(&argc, &argv); + + cmd = argv[0]; + + if (argc < 1) { + print_help(); + return EXIT_FAILURE; + } + + setlocale(LC_ALL, ""); + textdomain(PACKAGE); + + /* Turn "perf cmd --help" into "perf help cmd" */ + if (argc > 1 && !strcmp(argv[1], "--help")) { + argv[1] = argv[0]; + argv[0] = cmd = "help"; + } + + base_cpu = sched_getcpu(); + if (base_cpu < 0) { + fprintf(stderr, _("No valid cpus found.\n")); + return EXIT_FAILURE; + } + + get_cpu_info(&cpupower_cpu_info); + run_as_root = !geteuid(); + if (run_as_root) { + ret = uname(&uts); + sprintf(pathname, "/dev/cpu/%d/msr", base_cpu); + if (!ret && !strcmp(uts.machine, "x86_64") && + stat(pathname, &statbuf) != 0) { + if (system("modprobe msr") == -1) + fprintf(stderr, _("MSR access not available.\n")); + } + } + + for (i = 0; i < ARRAY_SIZE(commands); i++) { + struct cmd_struct *p = commands + i; + if (strcmp(p->cmd, cmd)) + continue; + if (!run_as_root && p->needs_root) { + fprintf(stderr, _("Subcommand %s needs root " + "privileges\n"), cmd); + return EXIT_FAILURE; + } + ret = p->main(argc, argv); + if (cpus_chosen) + bitmask_free(cpus_chosen); + return ret; + } + print_help(); + return EXIT_FAILURE; +} diff --git a/tools/power/cpupower/utils/helpers/amd.c b/tools/power/cpupower/utils/helpers/amd.c new file mode 100644 index 000000000..7c4f83a8c --- /dev/null +++ b/tools/power/cpupower/utils/helpers/amd.c @@ -0,0 +1,156 @@ +// SPDX-License-Identifier: GPL-2.0 +#if defined(__i386__) || defined(__x86_64__) +#include <unistd.h> +#include <errno.h> +#include <stdio.h> +#include <stdint.h> + +#include <pci/pci.h> + +#include "helpers/helpers.h" + +#define MSR_AMD_PSTATE_STATUS 0xc0010063 +#define MSR_AMD_PSTATE 0xc0010064 +#define MSR_AMD_PSTATE_LIMIT 0xc0010061 + +union msr_pstate { + struct { + unsigned fid:6; + unsigned did:3; + unsigned vid:7; + unsigned res1:6; + unsigned nbdid:1; + unsigned res2:2; + unsigned nbvid:7; + unsigned iddval:8; + unsigned idddiv:2; + unsigned res3:21; + unsigned en:1; + } bits; + struct { + unsigned fid:8; + unsigned did:6; + unsigned vid:8; + unsigned iddval:8; + unsigned idddiv:2; + unsigned res1:31; + unsigned en:1; + } fam17h_bits; + unsigned long long val; +}; + +static int get_did(int family, union msr_pstate pstate) +{ + int t; + + if (family == 0x12) + t = pstate.val & 0xf; + else if (family == 0x17 || family == 0x18) + t = pstate.fam17h_bits.did; + else + t = pstate.bits.did; + + return t; +} + +static int get_cof(int family, union msr_pstate pstate) +{ + int t; + int fid, did, cof; + + did = get_did(family, pstate); + if (family == 0x17 || family == 0x18) { + fid = pstate.fam17h_bits.fid; + cof = 200 * fid / did; + } else { + t = 0x10; + fid = pstate.bits.fid; + if (family == 0x11) + t = 0x8; + cof = (100 * (fid + t)) >> did; + } + return cof; +} + +/* Needs: + * cpu -> the cpu that gets evaluated + * cpu_family -> The cpu's family (0x10, 0x12,...) + * boots_states -> how much boost states the machines support + * + * Fills up: + * pstates -> a pointer to an array of size MAX_HW_PSTATES + * must be initialized with zeros. + * All available HW pstates (including boost states) + * no -> amount of pstates above array got filled up with + * + * returns zero on success, -1 on failure + */ +int decode_pstates(unsigned int cpu, unsigned int cpu_family, + int boost_states, unsigned long *pstates, int *no) +{ + int i, psmax, pscur; + union msr_pstate pstate; + unsigned long long val; + + /* Only read out frequencies from HW when CPU might be boostable + to keep the code as short and clean as possible. + Otherwise frequencies are exported via ACPI tables. + */ + if (cpu_family < 0x10 || cpu_family == 0x14) + return -1; + + if (read_msr(cpu, MSR_AMD_PSTATE_LIMIT, &val)) + return -1; + + psmax = (val >> 4) & 0x7; + + if (read_msr(cpu, MSR_AMD_PSTATE_STATUS, &val)) + return -1; + + pscur = val & 0x7; + + pscur += boost_states; + psmax += boost_states; + for (i = 0; i <= psmax; i++) { + if (i >= MAX_HW_PSTATES) { + fprintf(stderr, "HW pstates [%d] exceeding max [%d]\n", + psmax, MAX_HW_PSTATES); + return -1; + } + if (read_msr(cpu, MSR_AMD_PSTATE + i, &pstate.val)) + return -1; + if ((cpu_family == 0x17) && (!pstate.fam17h_bits.en)) + continue; + else if (!pstate.bits.en) + continue; + + pstates[i] = get_cof(cpu_family, pstate); + } + *no = i; + return 0; +} + +int amd_pci_get_num_boost_states(int *active, int *states) +{ + struct pci_access *pci_acc; + struct pci_dev *device; + uint8_t val = 0; + + *active = *states = 0; + + device = pci_slot_func_init(&pci_acc, 0x18, 4); + + if (device == NULL) + return -ENODEV; + + val = pci_read_byte(device, 0x15c); + if (val & 3) + *active = 1; + else + *active = 0; + *states = (val >> 2) & 7; + + pci_cleanup(pci_acc); + return 0; +} +#endif /* defined(__i386__) || defined(__x86_64__) */ diff --git a/tools/power/cpupower/utils/helpers/bitmask.c b/tools/power/cpupower/utils/helpers/bitmask.c new file mode 100644 index 000000000..649d87cb8 --- /dev/null +++ b/tools/power/cpupower/utils/helpers/bitmask.c @@ -0,0 +1,293 @@ +// SPDX-License-Identifier: GPL-2.0 +#include <stdio.h> +#include <stdlib.h> +#include <string.h> + +#include <helpers/bitmask.h> + +/* How many bits in an unsigned long */ +#define bitsperlong (8 * sizeof(unsigned long)) + +/* howmany(a,b) : how many elements of size b needed to hold all of a */ +#define howmany(x, y) (((x)+((y)-1))/(y)) + +/* How many longs in mask of n bits */ +#define longsperbits(n) howmany(n, bitsperlong) + +#define max(a, b) ((a) > (b) ? (a) : (b)) + +/* + * Allocate and free `struct bitmask *` + */ + +/* Allocate a new `struct bitmask` with a size of n bits */ +struct bitmask *bitmask_alloc(unsigned int n) +{ + struct bitmask *bmp; + + bmp = malloc(sizeof(*bmp)); + if (!bmp) + return 0; + bmp->size = n; + bmp->maskp = calloc(longsperbits(n), sizeof(unsigned long)); + if (!bmp->maskp) { + free(bmp); + return 0; + } + return bmp; +} + +/* Free `struct bitmask` */ +void bitmask_free(struct bitmask *bmp) +{ + if (!bmp) + return; + free(bmp->maskp); + bmp->maskp = (unsigned long *)0xdeadcdef; /* double free tripwire */ + free(bmp); +} + +/* + * The routines _getbit() and _setbit() are the only + * routines that actually understand the layout of bmp->maskp[]. + * + * On little endian architectures, this could simply be an array of + * bytes. But the kernel layout of bitmasks _is_ visible to userspace + * via the sched_(set/get)affinity calls in Linux 2.6, and on big + * endian architectures, it is painfully obvious that this is an + * array of unsigned longs. + */ + +/* Return the value (0 or 1) of bit n in bitmask bmp */ +static unsigned int _getbit(const struct bitmask *bmp, unsigned int n) +{ + if (n < bmp->size) + return (bmp->maskp[n/bitsperlong] >> (n % bitsperlong)) & 1; + else + return 0; +} + +/* Set bit n in bitmask bmp to value v (0 or 1) */ +static void _setbit(struct bitmask *bmp, unsigned int n, unsigned int v) +{ + if (n < bmp->size) { + if (v) + bmp->maskp[n/bitsperlong] |= 1UL << (n % bitsperlong); + else + bmp->maskp[n/bitsperlong] &= + ~(1UL << (n % bitsperlong)); + } +} + +/* + * When parsing bitmask lists, only allow numbers, separated by one + * of the allowed next characters. + * + * The parameter 'sret' is the return from a sscanf "%u%c". It is + * -1 if the sscanf input string was empty. It is 0 if the first + * character in the sscanf input string was not a decimal number. + * It is 1 if the unsigned number matching the "%u" was the end of the + * input string. It is 2 if one or more additional characters followed + * the matched unsigned number. If it is 2, then 'nextc' is the first + * character following the number. The parameter 'ok_next_chars' + * is the nul-terminated list of allowed next characters. + * + * The mask term just scanned was ok if and only if either the numbers + * matching the %u were all of the input or if the next character in + * the input past the numbers was one of the allowed next characters. + */ +static int scan_was_ok(int sret, char nextc, const char *ok_next_chars) +{ + return sret == 1 || + (sret == 2 && strchr(ok_next_chars, nextc) != NULL); +} + +static const char *nexttoken(const char *q, int sep) +{ + if (q) + q = strchr(q, sep); + if (q) + q++; + return q; +} + +/* Set a single bit i in bitmask */ +struct bitmask *bitmask_setbit(struct bitmask *bmp, unsigned int i) +{ + _setbit(bmp, i, 1); + return bmp; +} + +/* Set all bits in bitmask: bmp = ~0 */ +struct bitmask *bitmask_setall(struct bitmask *bmp) +{ + unsigned int i; + for (i = 0; i < bmp->size; i++) + _setbit(bmp, i, 1); + return bmp; +} + +/* Clear all bits in bitmask: bmp = 0 */ +struct bitmask *bitmask_clearall(struct bitmask *bmp) +{ + unsigned int i; + for (i = 0; i < bmp->size; i++) + _setbit(bmp, i, 0); + return bmp; +} + +/* True if all bits are clear */ +int bitmask_isallclear(const struct bitmask *bmp) +{ + unsigned int i; + for (i = 0; i < bmp->size; i++) + if (_getbit(bmp, i)) + return 0; + return 1; +} + +/* True if specified bit i is set */ +int bitmask_isbitset(const struct bitmask *bmp, unsigned int i) +{ + return _getbit(bmp, i); +} + +/* Number of lowest set bit (min) */ +unsigned int bitmask_first(const struct bitmask *bmp) +{ + return bitmask_next(bmp, 0); +} + +/* Number of highest set bit (max) */ +unsigned int bitmask_last(const struct bitmask *bmp) +{ + unsigned int i; + unsigned int m = bmp->size; + for (i = 0; i < bmp->size; i++) + if (_getbit(bmp, i)) + m = i; + return m; +} + +/* Number of next set bit at or above given bit i */ +unsigned int bitmask_next(const struct bitmask *bmp, unsigned int i) +{ + unsigned int n; + for (n = i; n < bmp->size; n++) + if (_getbit(bmp, n)) + break; + return n; +} + +/* + * Parses a comma-separated list of numbers and ranges of numbers, + * with optional ':%u' strides modifying ranges, into provided bitmask. + * Some examples of input lists and their equivalent simple list: + * Input Equivalent to + * 0-3 0,1,2,3 + * 0-7:2 0,2,4,6 + * 1,3,5-7 1,3,5,6,7 + * 0-3:2,8-15:4 0,2,8,12 + */ +int bitmask_parselist(const char *buf, struct bitmask *bmp) +{ + const char *p, *q; + + bitmask_clearall(bmp); + + q = buf; + while (p = q, q = nexttoken(q, ','), p) { + unsigned int a; /* begin of range */ + unsigned int b; /* end of range */ + unsigned int s; /* stride */ + const char *c1, *c2; /* next tokens after '-' or ',' */ + char nextc; /* char after sscanf %u match */ + int sret; /* sscanf return (number of matches) */ + + sret = sscanf(p, "%u%c", &a, &nextc); + if (!scan_was_ok(sret, nextc, ",-")) + goto err; + b = a; + s = 1; + c1 = nexttoken(p, '-'); + c2 = nexttoken(p, ','); + if (c1 != NULL && (c2 == NULL || c1 < c2)) { + sret = sscanf(c1, "%u%c", &b, &nextc); + if (!scan_was_ok(sret, nextc, ",:")) + goto err; + c1 = nexttoken(c1, ':'); + if (c1 != NULL && (c2 == NULL || c1 < c2)) { + sret = sscanf(c1, "%u%c", &s, &nextc); + if (!scan_was_ok(sret, nextc, ",")) + goto err; + } + } + if (!(a <= b)) + goto err; + if (b >= bmp->size) + goto err; + while (a <= b) { + _setbit(bmp, a, 1); + a += s; + } + } + return 0; +err: + bitmask_clearall(bmp); + return -1; +} + +/* + * emit(buf, buflen, rbot, rtop, len) + * + * Helper routine for bitmask_displaylist(). Write decimal number + * or range to buf+len, suppressing output past buf+buflen, with optional + * comma-prefix. Return len of what would be written to buf, if it + * all fit. + */ + +static inline int emit(char *buf, int buflen, int rbot, int rtop, int len) +{ + if (len > 0) + len += snprintf(buf + len, max(buflen - len, 0), ","); + if (rbot == rtop) + len += snprintf(buf + len, max(buflen - len, 0), "%d", rbot); + else + len += snprintf(buf + len, max(buflen - len, 0), "%d-%d", + rbot, rtop); + return len; +} + +/* + * Write decimal list representation of bmp to buf. + * + * Output format is a comma-separated list of decimal numbers and + * ranges. Consecutively set bits are shown as two hyphen-separated + * decimal numbers, the smallest and largest bit numbers set in + * the range. Output format is compatible with the format + * accepted as input by bitmap_parselist(). + * + * The return value is the number of characters which would be + * generated for the given input, excluding the trailing '\0', as + * per ISO C99. + */ + +int bitmask_displaylist(char *buf, int buflen, const struct bitmask *bmp) +{ + int len = 0; + /* current bit is 'cur', most recently seen range is [rbot, rtop] */ + unsigned int cur, rbot, rtop; + + if (buflen > 0) + *buf = 0; + rbot = cur = bitmask_first(bmp); + while (cur < bmp->size) { + rtop = cur; + cur = bitmask_next(bmp, cur+1); + if (cur >= bmp->size || cur > rtop + 1) { + len = emit(buf, buflen, rbot, rtop, len); + rbot = cur; + } + } + return len; +} diff --git a/tools/power/cpupower/utils/helpers/bitmask.h b/tools/power/cpupower/utils/helpers/bitmask.h new file mode 100644 index 000000000..b98d93a44 --- /dev/null +++ b/tools/power/cpupower/utils/helpers/bitmask.h @@ -0,0 +1,34 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef __CPUPOWER_BITMASK__ +#define __CPUPOWER_BITMASK__ + +/* Taken over from libbitmask, a project initiated from sgi: + * Url: http://oss.sgi.com/projects/cpusets/ + * Unfortunately it's not very widespread, therefore relevant parts are + * pasted here. + */ + +struct bitmask { + unsigned int size; + unsigned long *maskp; +}; + +struct bitmask *bitmask_alloc(unsigned int n); +void bitmask_free(struct bitmask *bmp); + +struct bitmask *bitmask_setbit(struct bitmask *bmp, unsigned int i); +struct bitmask *bitmask_setall(struct bitmask *bmp); +struct bitmask *bitmask_clearall(struct bitmask *bmp); + +unsigned int bitmask_first(const struct bitmask *bmp); +unsigned int bitmask_next(const struct bitmask *bmp, unsigned int i); +unsigned int bitmask_last(const struct bitmask *bmp); +int bitmask_isallclear(const struct bitmask *bmp); +int bitmask_isbitset(const struct bitmask *bmp, unsigned int i); + +int bitmask_parselist(const char *buf, struct bitmask *bmp); +int bitmask_displaylist(char *buf, int len, const struct bitmask *bmp); + + + +#endif /*__CPUPOWER_BITMASK__ */ diff --git a/tools/power/cpupower/utils/helpers/cpuid.c b/tools/power/cpupower/utils/helpers/cpuid.c new file mode 100644 index 000000000..73bfafc60 --- /dev/null +++ b/tools/power/cpupower/utils/helpers/cpuid.c @@ -0,0 +1,186 @@ +// SPDX-License-Identifier: GPL-2.0 +#include <stdio.h> +#include <errno.h> +#include <string.h> +#include <unistd.h> +#include <stdlib.h> + +#include "helpers/helpers.h" + +static const char *cpu_vendor_table[X86_VENDOR_MAX] = { + "Unknown", "GenuineIntel", "AuthenticAMD", "HygonGenuine", +}; + +#if defined(__i386__) || defined(__x86_64__) + +/* from gcc */ +#include <cpuid.h> + +/* + * CPUID functions returning a single datum + * + * Define unsigned int cpuid_e[abcd]x(unsigned int op) + */ +#define cpuid_func(reg) \ + unsigned int cpuid_##reg(unsigned int op) \ + { \ + unsigned int eax, ebx, ecx, edx; \ + __cpuid(op, eax, ebx, ecx, edx); \ + return reg; \ + } +cpuid_func(eax); +cpuid_func(ebx); +cpuid_func(ecx); +cpuid_func(edx); + +#endif /* defined(__i386__) || defined(__x86_64__) */ + +/* get_cpu_info + * + * Extract CPU vendor, family, model, stepping info from /proc/cpuinfo + * + * Returns 0 on success or a negativ error code + * + * TBD: Should there be a cpuid alternative for this if /proc is not mounted? + */ +int get_cpu_info(struct cpupower_cpu_info *cpu_info) +{ + FILE *fp; + char value[64]; + unsigned int proc, x; + unsigned int unknown = 0xffffff; + unsigned int cpuid_level, ext_cpuid_level; + + int ret = -EINVAL; + + cpu_info->vendor = X86_VENDOR_UNKNOWN; + cpu_info->family = unknown; + cpu_info->model = unknown; + cpu_info->stepping = unknown; + cpu_info->caps = 0; + + fp = fopen("/proc/cpuinfo", "r"); + if (!fp) + return -EIO; + + while (!feof(fp)) { + if (!fgets(value, 64, fp)) + continue; + value[63 - 1] = '\0'; + + if (!strncmp(value, "processor\t: ", 12)) + sscanf(value, "processor\t: %u", &proc); + + if (proc != (unsigned int)base_cpu) + continue; + + /* Get CPU vendor */ + if (!strncmp(value, "vendor_id", 9)) { + for (x = 1; x < X86_VENDOR_MAX; x++) { + if (strstr(value, cpu_vendor_table[x])) + cpu_info->vendor = x; + } + /* Get CPU family, etc. */ + } else if (!strncmp(value, "cpu family\t: ", 13)) { + sscanf(value, "cpu family\t: %u", + &cpu_info->family); + } else if (!strncmp(value, "model\t\t: ", 9)) { + sscanf(value, "model\t\t: %u", + &cpu_info->model); + } else if (!strncmp(value, "stepping\t: ", 10)) { + sscanf(value, "stepping\t: %u", + &cpu_info->stepping); + + /* Exit -> all values must have been set */ + if (cpu_info->vendor == X86_VENDOR_UNKNOWN || + cpu_info->family == unknown || + cpu_info->model == unknown || + cpu_info->stepping == unknown) { + ret = -EINVAL; + goto out; + } + + ret = 0; + goto out; + } + } + ret = -ENODEV; +out: + fclose(fp); + /* Get some useful CPU capabilities from cpuid */ + if (cpu_info->vendor != X86_VENDOR_AMD && + cpu_info->vendor != X86_VENDOR_HYGON && + cpu_info->vendor != X86_VENDOR_INTEL) + return ret; + + cpuid_level = cpuid_eax(0); + ext_cpuid_level = cpuid_eax(0x80000000); + + /* Invariant TSC */ + if (ext_cpuid_level >= 0x80000007 && + (cpuid_edx(0x80000007) & (1 << 8))) + cpu_info->caps |= CPUPOWER_CAP_INV_TSC; + + /* Aperf/Mperf registers support */ + if (cpuid_level >= 6 && (cpuid_ecx(6) & 0x1)) + cpu_info->caps |= CPUPOWER_CAP_APERF; + + /* AMD or Hygon Boost state enable/disable register */ + if (cpu_info->vendor == X86_VENDOR_AMD || + cpu_info->vendor == X86_VENDOR_HYGON) { + if (ext_cpuid_level >= 0x80000007 && + (cpuid_edx(0x80000007) & (1 << 9))) + cpu_info->caps |= CPUPOWER_CAP_AMD_CBP; + + if (ext_cpuid_level >= 0x80000008 && + cpuid_ebx(0x80000008) & (1 << 4)) + cpu_info->caps |= CPUPOWER_CAP_AMD_RDPRU; + } + + if (cpu_info->vendor == X86_VENDOR_INTEL) { + if (cpuid_level >= 6 && + (cpuid_eax(6) & (1 << 1))) + cpu_info->caps |= CPUPOWER_CAP_INTEL_IDA; + } + + if (cpu_info->vendor == X86_VENDOR_INTEL) { + /* Intel's perf-bias MSR support */ + if (cpuid_level >= 6 && (cpuid_ecx(6) & (1 << 3))) + cpu_info->caps |= CPUPOWER_CAP_PERF_BIAS; + + /* Intel's Turbo Ratio Limit support */ + if (cpu_info->family == 6) { + switch (cpu_info->model) { + case 0x1A: /* Core i7, Xeon 5500 series + * Bloomfield, Gainstown NHM-EP + */ + case 0x1E: /* Core i7 and i5 Processor + * Clarksfield, Lynnfield, Jasper Forest + */ + case 0x1F: /* Core i7 and i5 Processor - Nehalem */ + case 0x25: /* Westmere Client + * Clarkdale, Arrandale + */ + case 0x2C: /* Westmere EP - Gulftown */ + cpu_info->caps |= CPUPOWER_CAP_HAS_TURBO_RATIO; + break; + case 0x2A: /* SNB */ + case 0x2D: /* SNB Xeon */ + case 0x3A: /* IVB */ + case 0x3E: /* IVB Xeon */ + cpu_info->caps |= CPUPOWER_CAP_HAS_TURBO_RATIO; + cpu_info->caps |= CPUPOWER_CAP_IS_SNB; + break; + case 0x2E: /* Nehalem-EX Xeon - Beckton */ + case 0x2F: /* Westmere-EX Xeon - Eagleton */ + default: + break; + } + } + } + + /* printf("ID: %u - Extid: 0x%x - Caps: 0x%llx\n", + cpuid_level, ext_cpuid_level, cpu_info->caps); + */ + return ret; +} diff --git a/tools/power/cpupower/utils/helpers/helpers.h b/tools/power/cpupower/utils/helpers/helpers.h new file mode 100644 index 000000000..c258eeccd --- /dev/null +++ b/tools/power/cpupower/utils/helpers/helpers.h @@ -0,0 +1,174 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * (C) 2010,2011 Thomas Renninger <trenn@suse.de>, Novell Inc. + * + * Miscellaneous helpers which do not fit or are worth + * to put into separate headers + */ + +#ifndef __CPUPOWERUTILS_HELPERS__ +#define __CPUPOWERUTILS_HELPERS__ + +#include <libintl.h> +#include <locale.h> + +#include "helpers/bitmask.h" +#include <cpupower.h> + +/* Internationalization ****************************/ +#ifdef NLS + +#define _(String) gettext(String) +#ifndef gettext_noop +#define gettext_noop(String) String +#endif +#define N_(String) gettext_noop(String) + +#else /* !NLS */ + +#define _(String) String +#define N_(String) String + +#endif +/* Internationalization ****************************/ + +extern int run_as_root; +extern int base_cpu; +extern struct bitmask *cpus_chosen; + +/* Global verbose (-d) stuff *********************************/ +/* + * define DEBUG via global Makefile variable + * Debug output is sent to stderr, do: + * cpupower monitor 2>/tmp/debug + * to split debug output away from normal output +*/ +#ifdef DEBUG +extern int be_verbose; + +#define dprint(fmt, ...) { \ + if (be_verbose) { \ + fprintf(stderr, "%s: " fmt, \ + __func__, ##__VA_ARGS__); \ + } \ + } +#else +static inline void dprint(const char *fmt, ...) { } +#endif +extern int be_verbose; +/* Global verbose (-v) stuff *********************************/ + +/* cpuid and cpuinfo helpers **************************/ +enum cpupower_cpu_vendor {X86_VENDOR_UNKNOWN = 0, X86_VENDOR_INTEL, + X86_VENDOR_AMD, X86_VENDOR_HYGON, X86_VENDOR_MAX}; + +#define CPUPOWER_CAP_INV_TSC 0x00000001 +#define CPUPOWER_CAP_APERF 0x00000002 +#define CPUPOWER_CAP_AMD_CBP 0x00000004 +#define CPUPOWER_CAP_PERF_BIAS 0x00000008 +#define CPUPOWER_CAP_HAS_TURBO_RATIO 0x00000010 +#define CPUPOWER_CAP_IS_SNB 0x00000020 +#define CPUPOWER_CAP_INTEL_IDA 0x00000040 +#define CPUPOWER_CAP_AMD_RDPRU 0x00000080 + +#define CPUPOWER_AMD_CPBDIS 0x02000000 + +#define MAX_HW_PSTATES 10 + +struct cpupower_cpu_info { + enum cpupower_cpu_vendor vendor; + unsigned int family; + unsigned int model; + unsigned int stepping; + /* CPU capabilities read out from cpuid */ + unsigned long long caps; +}; + +/* get_cpu_info + * + * Extract CPU vendor, family, model, stepping info from /proc/cpuinfo + * + * Returns 0 on success or a negative error code + * Only used on x86, below global's struct values are zero/unknown on + * other archs + */ +extern int get_cpu_info(struct cpupower_cpu_info *cpu_info); +extern struct cpupower_cpu_info cpupower_cpu_info; +/* cpuid and cpuinfo helpers **************************/ + +/* X86 ONLY ****************************************/ +#if defined(__i386__) || defined(__x86_64__) + +#include <pci/pci.h> + +/* Read/Write msr ****************************/ +extern int read_msr(int cpu, unsigned int idx, unsigned long long *val); +extern int write_msr(int cpu, unsigned int idx, unsigned long long val); + +extern int msr_intel_set_perf_bias(unsigned int cpu, unsigned int val); +extern int msr_intel_get_perf_bias(unsigned int cpu); +extern unsigned long long msr_intel_get_turbo_ratio(unsigned int cpu); + +/* Read/Write msr ****************************/ + +/* PCI stuff ****************************/ +extern int amd_pci_get_num_boost_states(int *active, int *states); +extern struct pci_dev *pci_acc_init(struct pci_access **pacc, int domain, + int bus, int slot, int func, int vendor, + int dev); +extern struct pci_dev *pci_slot_func_init(struct pci_access **pacc, + int slot, int func); + +/* PCI stuff ****************************/ + +/* AMD HW pstate decoding **************************/ + +extern int decode_pstates(unsigned int cpu, unsigned int cpu_family, + int boost_states, unsigned long *pstates, int *no); + +/* AMD HW pstate decoding **************************/ + +extern int cpufreq_has_boost_support(unsigned int cpu, int *support, + int *active, int * states); +/* + * CPUID functions returning a single datum + */ +unsigned int cpuid_eax(unsigned int op); +unsigned int cpuid_ebx(unsigned int op); +unsigned int cpuid_ecx(unsigned int op); +unsigned int cpuid_edx(unsigned int op); + +/* cpuid and cpuinfo helpers **************************/ +/* X86 ONLY ********************************************/ +#else +static inline int decode_pstates(unsigned int cpu, unsigned int cpu_family, + int boost_states, unsigned long *pstates, + int *no) +{ return -1; }; + +static inline int read_msr(int cpu, unsigned int idx, unsigned long long *val) +{ return -1; }; +static inline int write_msr(int cpu, unsigned int idx, unsigned long long val) +{ return -1; }; +static inline int msr_intel_set_perf_bias(unsigned int cpu, unsigned int val) +{ return -1; }; +static inline int msr_intel_get_perf_bias(unsigned int cpu) +{ return -1; }; +static inline unsigned long long msr_intel_get_turbo_ratio(unsigned int cpu) +{ return 0; }; + +/* Read/Write msr ****************************/ + +static inline int cpufreq_has_boost_support(unsigned int cpu, int *support, + int *active, int * states) +{ return -1; } + +/* cpuid and cpuinfo helpers **************************/ + +static inline unsigned int cpuid_eax(unsigned int op) { return 0; }; +static inline unsigned int cpuid_ebx(unsigned int op) { return 0; }; +static inline unsigned int cpuid_ecx(unsigned int op) { return 0; }; +static inline unsigned int cpuid_edx(unsigned int op) { return 0; }; +#endif /* defined(__i386__) || defined(__x86_64__) */ + +#endif /* __CPUPOWERUTILS_HELPERS__ */ diff --git a/tools/power/cpupower/utils/helpers/misc.c b/tools/power/cpupower/utils/helpers/misc.c new file mode 100644 index 000000000..f406adc40 --- /dev/null +++ b/tools/power/cpupower/utils/helpers/misc.c @@ -0,0 +1,43 @@ +// SPDX-License-Identifier: GPL-2.0 +#if defined(__i386__) || defined(__x86_64__) + +#include "helpers/helpers.h" + +#define MSR_AMD_HWCR 0xc0010015 + +int cpufreq_has_boost_support(unsigned int cpu, int *support, int *active, + int *states) +{ + struct cpupower_cpu_info cpu_info; + int ret; + unsigned long long val; + + *support = *active = *states = 0; + + ret = get_cpu_info(&cpu_info); + if (ret) + return ret; + + if (cpupower_cpu_info.caps & CPUPOWER_CAP_AMD_CBP) { + *support = 1; + + /* AMD Family 0x17 does not utilize PCI D18F4 like prior + * families and has no fixed discrete boost states but + * has Hardware determined variable increments instead. + */ + + if (cpu_info.family == 0x17 || cpu_info.family == 0x18) { + if (!read_msr(cpu, MSR_AMD_HWCR, &val)) { + if (!(val & CPUPOWER_AMD_CPBDIS)) + *active = 1; + } + } else { + ret = amd_pci_get_num_boost_states(active, states); + if (ret) + return ret; + } + } else if (cpupower_cpu_info.caps & CPUPOWER_CAP_INTEL_IDA) + *support = *active = 1; + return 0; +} +#endif /* #if defined(__i386__) || defined(__x86_64__) */ diff --git a/tools/power/cpupower/utils/helpers/msr.c b/tools/power/cpupower/utils/helpers/msr.c new file mode 100644 index 000000000..ab9950748 --- /dev/null +++ b/tools/power/cpupower/utils/helpers/msr.c @@ -0,0 +1,116 @@ +// SPDX-License-Identifier: GPL-2.0 +#if defined(__i386__) || defined(__x86_64__) + +#include <fcntl.h> +#include <stdio.h> +#include <unistd.h> +#include <stdint.h> + +#include "helpers/helpers.h" + +/* Intel specific MSRs */ +#define MSR_IA32_PERF_STATUS 0x198 +#define MSR_IA32_MISC_ENABLES 0x1a0 +#define MSR_IA32_ENERGY_PERF_BIAS 0x1b0 +#define MSR_NEHALEM_TURBO_RATIO_LIMIT 0x1ad + +/* + * read_msr + * + * Will return 0 on success and -1 on failure. + * Possible errno values could be: + * EFAULT -If the read/write did not fully complete + * EIO -If the CPU does not support MSRs + * ENXIO -If the CPU does not exist + */ + +int read_msr(int cpu, unsigned int idx, unsigned long long *val) +{ + int fd; + char msr_file_name[64]; + + sprintf(msr_file_name, "/dev/cpu/%d/msr", cpu); + fd = open(msr_file_name, O_RDONLY); + if (fd < 0) + return -1; + if (lseek(fd, idx, SEEK_CUR) == -1) + goto err; + if (read(fd, val, sizeof *val) != sizeof *val) + goto err; + close(fd); + return 0; + err: + close(fd); + return -1; +} + +/* + * write_msr + * + * Will return 0 on success and -1 on failure. + * Possible errno values could be: + * EFAULT -If the read/write did not fully complete + * EIO -If the CPU does not support MSRs + * ENXIO -If the CPU does not exist + */ +int write_msr(int cpu, unsigned int idx, unsigned long long val) +{ + int fd; + char msr_file_name[64]; + + sprintf(msr_file_name, "/dev/cpu/%d/msr", cpu); + fd = open(msr_file_name, O_WRONLY); + if (fd < 0) + return -1; + if (lseek(fd, idx, SEEK_CUR) == -1) + goto err; + if (write(fd, &val, sizeof val) != sizeof val) + goto err; + close(fd); + return 0; + err: + close(fd); + return -1; +} + +int msr_intel_get_perf_bias(unsigned int cpu) +{ + unsigned long long val; + int ret; + + if (!(cpupower_cpu_info.caps & CPUPOWER_CAP_PERF_BIAS)) + return -1; + + ret = read_msr(cpu, MSR_IA32_ENERGY_PERF_BIAS, &val); + if (ret) + return ret; + return val; +} + +int msr_intel_set_perf_bias(unsigned int cpu, unsigned int val) +{ + int ret; + + if (!(cpupower_cpu_info.caps & CPUPOWER_CAP_PERF_BIAS)) + return -1; + + ret = write_msr(cpu, MSR_IA32_ENERGY_PERF_BIAS, val); + if (ret) + return ret; + return 0; +} + +unsigned long long msr_intel_get_turbo_ratio(unsigned int cpu) +{ + unsigned long long val; + int ret; + + if (!(cpupower_cpu_info.caps & CPUPOWER_CAP_HAS_TURBO_RATIO)) + return -1; + + ret = read_msr(cpu, MSR_NEHALEM_TURBO_RATIO_LIMIT, &val); + if (ret) + return ret; + return val; +} +#endif diff --git a/tools/power/cpupower/utils/helpers/pci.c b/tools/power/cpupower/utils/helpers/pci.c new file mode 100644 index 000000000..113f3da2a --- /dev/null +++ b/tools/power/cpupower/utils/helpers/pci.c @@ -0,0 +1,63 @@ +// SPDX-License-Identifier: GPL-2.0 +#if defined(__i386__) || defined(__x86_64__) + +#include <helpers/helpers.h> + +/* + * pci_acc_init + * + * PCI access helper function depending on libpci + * + * **pacc : if a valid pci_dev is returned + * *pacc must be passed to pci_acc_cleanup to free it + * + * domain: domain + * bus: bus + * slot: slot + * func: func + * vendor: vendor + * device: device + * Pass -1 for one of the six above to match any + * + * Returns : + * struct pci_dev which can be used with pci_{read,write}_* functions + * to access the PCI config space of matching pci devices + */ +struct pci_dev *pci_acc_init(struct pci_access **pacc, int domain, int bus, + int slot, int func, int vendor, int dev) +{ + struct pci_filter filter_nb_link; + struct pci_dev *device; + + *pacc = pci_alloc(); + if (*pacc == NULL) + return NULL; + + pci_filter_init(*pacc, &filter_nb_link); + filter_nb_link.domain = domain; + filter_nb_link.bus = bus; + filter_nb_link.slot = slot; + filter_nb_link.func = func; + filter_nb_link.vendor = vendor; + filter_nb_link.device = dev; + + pci_init(*pacc); + pci_scan_bus(*pacc); + + for (device = (*pacc)->devices; device; device = device->next) { + if (pci_filter_match(&filter_nb_link, device)) + return device; + } + pci_cleanup(*pacc); + return NULL; +} + +/* Typically one wants to get a specific slot(device)/func of the root domain + and bus */ +struct pci_dev *pci_slot_func_init(struct pci_access **pacc, int slot, + int func) +{ + return pci_acc_init(pacc, 0, 0, slot, func, -1, -1); +} + +#endif /* defined(__i386__) || defined(__x86_64__) */ diff --git a/tools/power/cpupower/utils/helpers/sysfs.c b/tools/power/cpupower/utils/helpers/sysfs.c new file mode 100644 index 000000000..e13ff3832 --- /dev/null +++ b/tools/power/cpupower/utils/helpers/sysfs.c @@ -0,0 +1,471 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * (C) 2004-2009 Dominik Brodowski <linux@dominikbrodowski.de> + * (C) 2011 Thomas Renninger <trenn@novell.com> Novell Inc. + */ + +#include <stdio.h> +#include <errno.h> +#include <stdlib.h> +#include <string.h> +#include <sys/types.h> +#include <sys/stat.h> +#include <fcntl.h> +#include <unistd.h> + +#include "helpers/sysfs.h" + +unsigned int sysfs_read_file(const char *path, char *buf, size_t buflen) +{ + int fd; + ssize_t numread; + + fd = open(path, O_RDONLY); + if (fd == -1) + return 0; + + numread = read(fd, buf, buflen - 1); + if (numread < 1) { + close(fd); + return 0; + } + + buf[numread] = '\0'; + close(fd); + + return (unsigned int) numread; +} + +/* + * Detect whether a CPU is online + * + * Returns: + * 1 -> if CPU is online + * 0 -> if CPU is offline + * negative errno values in error case + */ +int sysfs_is_cpu_online(unsigned int cpu) +{ + char path[SYSFS_PATH_MAX]; + int fd; + ssize_t numread; + unsigned long long value; + char linebuf[MAX_LINE_LEN]; + char *endp; + struct stat statbuf; + + snprintf(path, sizeof(path), PATH_TO_CPU "cpu%u", cpu); + + if (stat(path, &statbuf) != 0) + return 0; + + /* + * kernel without CONFIG_HOTPLUG_CPU + * -> cpuX directory exists, but not cpuX/online file + */ + snprintf(path, sizeof(path), PATH_TO_CPU "cpu%u/online", cpu); + if (stat(path, &statbuf) != 0) + return 1; + + fd = open(path, O_RDONLY); + if (fd == -1) + return -errno; + + numread = read(fd, linebuf, MAX_LINE_LEN - 1); + if (numread < 1) { + close(fd); + return -EIO; + } + linebuf[numread] = '\0'; + close(fd); + + value = strtoull(linebuf, &endp, 0); + if (value > 1) + return -EINVAL; + + return value; +} + +/* CPUidle idlestate specific /sys/devices/system/cpu/cpuX/cpuidle/ access */ + + +/* CPUidle idlestate specific /sys/devices/system/cpu/cpuX/cpuidle/ access */ + +/* + * helper function to check whether a file under "../cpuX/cpuidle/stateX/" dir + * exists. + * For example the functionality to disable c-states was introduced in later + * kernel versions, this function can be used to explicitly check for this + * feature. + * + * returns 1 if the file exists, 0 otherwise. + */ +unsigned int sysfs_idlestate_file_exists(unsigned int cpu, + unsigned int idlestate, + const char *fname) +{ + char path[SYSFS_PATH_MAX]; + struct stat statbuf; + + + snprintf(path, sizeof(path), PATH_TO_CPU "cpu%u/cpuidle/state%u/%s", + cpu, idlestate, fname); + if (stat(path, &statbuf) != 0) + return 0; + return 1; +} + +/* + * helper function to read file from /sys into given buffer + * fname is a relative path under "cpuX/cpuidle/stateX/" dir + * cstates starting with 0, C0 is not counted as cstate. + * This means if you want C1 info, pass 0 as idlestate param + */ +unsigned int sysfs_idlestate_read_file(unsigned int cpu, unsigned int idlestate, + const char *fname, char *buf, size_t buflen) +{ + char path[SYSFS_PATH_MAX]; + int fd; + ssize_t numread; + + snprintf(path, sizeof(path), PATH_TO_CPU "cpu%u/cpuidle/state%u/%s", + cpu, idlestate, fname); + + fd = open(path, O_RDONLY); + if (fd == -1) + return 0; + + numread = read(fd, buf, buflen - 1); + if (numread < 1) { + close(fd); + return 0; + } + + buf[numread] = '\0'; + close(fd); + + return (unsigned int) numread; +} + +/* + * helper function to write a new value to a /sys file + * fname is a relative path under "../cpuX/cpuidle/cstateY/" dir + * + * Returns the number of bytes written or 0 on error + */ +static +unsigned int sysfs_idlestate_write_file(unsigned int cpu, + unsigned int idlestate, + const char *fname, + const char *value, size_t len) +{ + char path[SYSFS_PATH_MAX]; + int fd; + ssize_t numwrite; + + snprintf(path, sizeof(path), PATH_TO_CPU "cpu%u/cpuidle/state%u/%s", + cpu, idlestate, fname); + + fd = open(path, O_WRONLY); + if (fd == -1) + return 0; + + numwrite = write(fd, value, len); + if (numwrite < 1) { + close(fd); + return 0; + } + + close(fd); + + return (unsigned int) numwrite; +} + +/* read access to files which contain one numeric value */ + +enum idlestate_value { + IDLESTATE_USAGE, + IDLESTATE_POWER, + IDLESTATE_LATENCY, + IDLESTATE_TIME, + IDLESTATE_DISABLE, + MAX_IDLESTATE_VALUE_FILES +}; + +static const char *idlestate_value_files[MAX_IDLESTATE_VALUE_FILES] = { + [IDLESTATE_USAGE] = "usage", + [IDLESTATE_POWER] = "power", + [IDLESTATE_LATENCY] = "latency", + [IDLESTATE_TIME] = "time", + [IDLESTATE_DISABLE] = "disable", +}; + +static unsigned long long sysfs_idlestate_get_one_value(unsigned int cpu, + unsigned int idlestate, + enum idlestate_value which) +{ + unsigned long long value; + unsigned int len; + char linebuf[MAX_LINE_LEN]; + char *endp; + + if (which >= MAX_IDLESTATE_VALUE_FILES) + return 0; + + len = sysfs_idlestate_read_file(cpu, idlestate, + idlestate_value_files[which], + linebuf, sizeof(linebuf)); + if (len == 0) + return 0; + + value = strtoull(linebuf, &endp, 0); + + if (endp == linebuf || errno == ERANGE) + return 0; + + return value; +} + +/* read access to files which contain one string */ + +enum idlestate_string { + IDLESTATE_DESC, + IDLESTATE_NAME, + MAX_IDLESTATE_STRING_FILES +}; + +static const char *idlestate_string_files[MAX_IDLESTATE_STRING_FILES] = { + [IDLESTATE_DESC] = "desc", + [IDLESTATE_NAME] = "name", +}; + + +static char *sysfs_idlestate_get_one_string(unsigned int cpu, + unsigned int idlestate, + enum idlestate_string which) +{ + char linebuf[MAX_LINE_LEN]; + char *result; + unsigned int len; + + if (which >= MAX_IDLESTATE_STRING_FILES) + return NULL; + + len = sysfs_idlestate_read_file(cpu, idlestate, + idlestate_string_files[which], + linebuf, sizeof(linebuf)); + if (len == 0) + return NULL; + + result = strdup(linebuf); + if (result == NULL) + return NULL; + + if (result[strlen(result) - 1] == '\n') + result[strlen(result) - 1] = '\0'; + + return result; +} + +/* + * Returns: + * 1 if disabled + * 0 if enabled + * -1 if idlestate is not available + * -2 if disabling is not supported by the kernel + */ +int sysfs_is_idlestate_disabled(unsigned int cpu, + unsigned int idlestate) +{ + if (sysfs_get_idlestate_count(cpu) <= idlestate) + return -1; + + if (!sysfs_idlestate_file_exists(cpu, idlestate, + idlestate_value_files[IDLESTATE_DISABLE])) + return -2; + return sysfs_idlestate_get_one_value(cpu, idlestate, IDLESTATE_DISABLE); +} + +/* + * Pass 1 as last argument to disable or 0 to enable the state + * Returns: + * 0 on success + * negative values on error, for example: + * -1 if idlestate is not available + * -2 if disabling is not supported by the kernel + * -3 No write access to disable/enable C-states + */ +int sysfs_idlestate_disable(unsigned int cpu, + unsigned int idlestate, + unsigned int disable) +{ + char value[SYSFS_PATH_MAX]; + int bytes_written; + + if (sysfs_get_idlestate_count(cpu) <= idlestate) + return -1; + + if (!sysfs_idlestate_file_exists(cpu, idlestate, + idlestate_value_files[IDLESTATE_DISABLE])) + return -2; + + snprintf(value, SYSFS_PATH_MAX, "%u", disable); + + bytes_written = sysfs_idlestate_write_file(cpu, idlestate, "disable", + value, sizeof(disable)); + if (bytes_written) + return 0; + return -3; +} + +unsigned long sysfs_get_idlestate_latency(unsigned int cpu, + unsigned int idlestate) +{ + return sysfs_idlestate_get_one_value(cpu, idlestate, IDLESTATE_LATENCY); +} + +unsigned long sysfs_get_idlestate_usage(unsigned int cpu, + unsigned int idlestate) +{ + return sysfs_idlestate_get_one_value(cpu, idlestate, IDLESTATE_USAGE); +} + +unsigned long long sysfs_get_idlestate_time(unsigned int cpu, + unsigned int idlestate) +{ + return sysfs_idlestate_get_one_value(cpu, idlestate, IDLESTATE_TIME); +} + +char *sysfs_get_idlestate_name(unsigned int cpu, unsigned int idlestate) +{ + return sysfs_idlestate_get_one_string(cpu, idlestate, IDLESTATE_NAME); +} + +char *sysfs_get_idlestate_desc(unsigned int cpu, unsigned int idlestate) +{ + return sysfs_idlestate_get_one_string(cpu, idlestate, IDLESTATE_DESC); +} + +/* + * Returns number of supported C-states of CPU core cpu + * Negativ in error case + * Zero if cpuidle does not export any C-states + */ +unsigned int sysfs_get_idlestate_count(unsigned int cpu) +{ + char file[SYSFS_PATH_MAX]; + struct stat statbuf; + int idlestates = 1; + + + snprintf(file, SYSFS_PATH_MAX, PATH_TO_CPU "cpuidle"); + if (stat(file, &statbuf) != 0 || !S_ISDIR(statbuf.st_mode)) + return 0; + + snprintf(file, SYSFS_PATH_MAX, PATH_TO_CPU "cpu%u/cpuidle/state0", cpu); + if (stat(file, &statbuf) != 0 || !S_ISDIR(statbuf.st_mode)) + return 0; + + while (stat(file, &statbuf) == 0 && S_ISDIR(statbuf.st_mode)) { + snprintf(file, SYSFS_PATH_MAX, PATH_TO_CPU + "cpu%u/cpuidle/state%d", cpu, idlestates); + idlestates++; + } + idlestates--; + return idlestates; +} + +/* CPUidle general /sys/devices/system/cpu/cpuidle/ sysfs access ********/ + +/* + * helper function to read file from /sys into given buffer + * fname is a relative path under "cpu/cpuidle/" dir + */ +static unsigned int sysfs_cpuidle_read_file(const char *fname, char *buf, + size_t buflen) +{ + char path[SYSFS_PATH_MAX]; + + snprintf(path, sizeof(path), PATH_TO_CPU "cpuidle/%s", fname); + + return sysfs_read_file(path, buf, buflen); +} + + + +/* read access to files which contain one string */ + +enum cpuidle_string { + CPUIDLE_GOVERNOR, + CPUIDLE_GOVERNOR_RO, + CPUIDLE_DRIVER, + MAX_CPUIDLE_STRING_FILES +}; + +static const char *cpuidle_string_files[MAX_CPUIDLE_STRING_FILES] = { + [CPUIDLE_GOVERNOR] = "current_governor", + [CPUIDLE_GOVERNOR_RO] = "current_governor_ro", + [CPUIDLE_DRIVER] = "current_driver", +}; + + +static char *sysfs_cpuidle_get_one_string(enum cpuidle_string which) +{ + char linebuf[MAX_LINE_LEN]; + char *result; + unsigned int len; + + if (which >= MAX_CPUIDLE_STRING_FILES) + return NULL; + + len = sysfs_cpuidle_read_file(cpuidle_string_files[which], + linebuf, sizeof(linebuf)); + if (len == 0) + return NULL; + + result = strdup(linebuf); + if (result == NULL) + return NULL; + + if (result[strlen(result) - 1] == '\n') + result[strlen(result) - 1] = '\0'; + + return result; +} + +char *sysfs_get_cpuidle_governor(void) +{ + char *tmp = sysfs_cpuidle_get_one_string(CPUIDLE_GOVERNOR_RO); + if (!tmp) + return sysfs_cpuidle_get_one_string(CPUIDLE_GOVERNOR); + else + return tmp; +} + +char *sysfs_get_cpuidle_driver(void) +{ + return sysfs_cpuidle_get_one_string(CPUIDLE_DRIVER); +} +/* CPUidle idlestate specific /sys/devices/system/cpu/cpuX/cpuidle/ access */ + +/* + * Get sched_mc or sched_smt settings + * Pass "mc" or "smt" as argument + * + * Returns negative value on failure + */ +int sysfs_get_sched(const char *smt_mc) +{ + return -ENODEV; +} + +/* + * Get sched_mc or sched_smt settings + * Pass "mc" or "smt" as argument + * + * Returns negative value on failure + */ +int sysfs_set_sched(const char *smt_mc, int val) +{ + return -ENODEV; +} diff --git a/tools/power/cpupower/utils/helpers/sysfs.h b/tools/power/cpupower/utils/helpers/sysfs.h new file mode 100644 index 000000000..0f0b9ad97 --- /dev/null +++ b/tools/power/cpupower/utils/helpers/sysfs.h @@ -0,0 +1,39 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef __CPUPOWER_HELPERS_SYSFS_H__ +#define __CPUPOWER_HELPERS_SYSFS_H__ + +#define PATH_TO_CPU "/sys/devices/system/cpu/" +#define MAX_LINE_LEN 255 +#define SYSFS_PATH_MAX 255 + +extern unsigned int sysfs_read_file(const char *path, char *buf, size_t buflen); + +extern unsigned int sysfs_idlestate_file_exists(unsigned int cpu, + unsigned int idlestate, + const char *fname); + +extern int sysfs_is_cpu_online(unsigned int cpu); + +extern int sysfs_is_idlestate_disabled(unsigned int cpu, + unsigned int idlestate); +extern int sysfs_idlestate_disable(unsigned int cpu, unsigned int idlestate, + unsigned int disable); +extern unsigned long sysfs_get_idlestate_latency(unsigned int cpu, + unsigned int idlestate); +extern unsigned long sysfs_get_idlestate_usage(unsigned int cpu, + unsigned int idlestate); +extern unsigned long long sysfs_get_idlestate_time(unsigned int cpu, + unsigned int idlestate); +extern char *sysfs_get_idlestate_name(unsigned int cpu, + unsigned int idlestate); +extern char *sysfs_get_idlestate_desc(unsigned int cpu, + unsigned int idlestate); +extern unsigned int sysfs_get_idlestate_count(unsigned int cpu); + +extern char *sysfs_get_cpuidle_governor(void); +extern char *sysfs_get_cpuidle_driver(void); + +extern int sysfs_get_sched(const char *smt_mc); +extern int sysfs_set_sched(const char *smt_mc, int val); + +#endif /* __CPUPOWER_HELPERS_SYSFS_H__ */ diff --git a/tools/power/cpupower/utils/helpers/topology.c b/tools/power/cpupower/utils/helpers/topology.c new file mode 100644 index 000000000..3dd0925d7 --- /dev/null +++ b/tools/power/cpupower/utils/helpers/topology.c @@ -0,0 +1,21 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * (C) 2010,2011 Thomas Renninger <trenn@suse.de>, Novell Inc. + * + * ToDo: Needs to be done more properly for AMD/Intel specifics + */ + +/* Helper struct for qsort, must be in sync with cpupower_topology.cpu_info */ +/* Be careful: Need to pass unsigned to the sort, so that offlined cores are + in the end, but double check for -1 for offlined cpus at other places */ + +#include <stdlib.h> +#include <stdio.h> +#include <unistd.h> +#include <errno.h> +#include <fcntl.h> + +#include <cpuidle.h> + +/* CPU topology/hierarchy parsing ******************/ + diff --git a/tools/power/cpupower/utils/idle_monitor/amd_fam14h_idle.c b/tools/power/cpupower/utils/idle_monitor/amd_fam14h_idle.c new file mode 100644 index 000000000..5edd35bd9 --- /dev/null +++ b/tools/power/cpupower/utils/idle_monitor/amd_fam14h_idle.c @@ -0,0 +1,334 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * (C) 2010,2011 Thomas Renninger <trenn@suse.de>, Novell Inc. + * + * PCI initialization based on example code from: + * Andreas Herrmann <andreas.herrmann3@amd.com> + */ + +#if defined(__i386__) || defined(__x86_64__) + +#include <stdio.h> +#include <stdlib.h> +#include <stdint.h> +#include <time.h> +#include <string.h> + +#include <pci/pci.h> + +#include "idle_monitor/cpupower-monitor.h" +#include "helpers/helpers.h" + +#define PCI_NON_PC0_OFFSET 0xb0 +#define PCI_PC1_OFFSET 0xb4 +#define PCI_PC6_OFFSET 0xb8 + +#define PCI_MONITOR_ENABLE_REG 0xe0 + +#define PCI_NON_PC0_ENABLE_BIT 0 +#define PCI_PC1_ENABLE_BIT 1 +#define PCI_PC6_ENABLE_BIT 2 + +#define PCI_NBP1_STAT_OFFSET 0x98 +#define PCI_NBP1_ACTIVE_BIT 2 +#define PCI_NBP1_ENTERED_BIT 1 + +#define PCI_NBP1_CAP_OFFSET 0x90 +#define PCI_NBP1_CAPABLE_BIT 31 + +#define OVERFLOW_MS 343597 /* 32 bit register filled at 12500 HZ + (1 tick per 80ns) */ + +enum amd_fam14h_states {NON_PC0 = 0, PC1, PC6, NBP1, + AMD_FAM14H_STATE_NUM}; + +static int fam14h_get_count_percent(unsigned int self_id, double *percent, + unsigned int cpu); +static int fam14h_nbp1_count(unsigned int id, unsigned long long *count, + unsigned int cpu); + +static cstate_t amd_fam14h_cstates[AMD_FAM14H_STATE_NUM] = { + { + .name = "!PC0", + .desc = N_("Package in sleep state (PC1 or deeper)"), + .id = NON_PC0, + .range = RANGE_PACKAGE, + .get_count_percent = fam14h_get_count_percent, + }, + { + .name = "PC1", + .desc = N_("Processor Package C1"), + .id = PC1, + .range = RANGE_PACKAGE, + .get_count_percent = fam14h_get_count_percent, + }, + { + .name = "PC6", + .desc = N_("Processor Package C6"), + .id = PC6, + .range = RANGE_PACKAGE, + .get_count_percent = fam14h_get_count_percent, + }, + { + .name = "NBP1", + .desc = N_("North Bridge P1 boolean counter (returns 0 or 1)"), + .id = NBP1, + .range = RANGE_PACKAGE, + .get_count = fam14h_nbp1_count, + }, +}; + +static struct pci_access *pci_acc; +static struct pci_dev *amd_fam14h_pci_dev; +static int nbp1_entered; + +static struct timespec start_time; +static unsigned long long timediff; + +#ifdef DEBUG +struct timespec dbg_time; +long dbg_timediff; +#endif + +static unsigned long long *previous_count[AMD_FAM14H_STATE_NUM]; +static unsigned long long *current_count[AMD_FAM14H_STATE_NUM]; + +static int amd_fam14h_get_pci_info(struct cstate *state, + unsigned int *pci_offset, + unsigned int *enable_bit, + unsigned int cpu) +{ + switch (state->id) { + case NON_PC0: + *enable_bit = PCI_NON_PC0_ENABLE_BIT; + *pci_offset = PCI_NON_PC0_OFFSET; + break; + case PC1: + *enable_bit = PCI_PC1_ENABLE_BIT; + *pci_offset = PCI_PC1_OFFSET; + break; + case PC6: + *enable_bit = PCI_PC6_ENABLE_BIT; + *pci_offset = PCI_PC6_OFFSET; + break; + case NBP1: + *enable_bit = PCI_NBP1_ENTERED_BIT; + *pci_offset = PCI_NBP1_STAT_OFFSET; + break; + default: + return -1; + } + return 0; +} + +static int amd_fam14h_init(cstate_t *state, unsigned int cpu) +{ + int enable_bit, pci_offset, ret; + uint32_t val; + + ret = amd_fam14h_get_pci_info(state, &pci_offset, &enable_bit, cpu); + if (ret) + return ret; + + /* NBP1 needs extra treating -> write 1 to D18F6x98 bit 1 for init */ + if (state->id == NBP1) { + val = pci_read_long(amd_fam14h_pci_dev, pci_offset); + val |= 1 << enable_bit; + val = pci_write_long(amd_fam14h_pci_dev, pci_offset, val); + return ret; + } + + /* Enable monitor */ + val = pci_read_long(amd_fam14h_pci_dev, PCI_MONITOR_ENABLE_REG); + dprint("Init %s: read at offset: 0x%x val: %u\n", state->name, + PCI_MONITOR_ENABLE_REG, (unsigned int) val); + val |= 1 << enable_bit; + pci_write_long(amd_fam14h_pci_dev, PCI_MONITOR_ENABLE_REG, val); + + dprint("Init %s: offset: 0x%x enable_bit: %d - val: %u (%u)\n", + state->name, PCI_MONITOR_ENABLE_REG, enable_bit, + (unsigned int) val, cpu); + + /* Set counter to zero */ + pci_write_long(amd_fam14h_pci_dev, pci_offset, 0); + previous_count[state->id][cpu] = 0; + + return 0; +} + +static int amd_fam14h_disable(cstate_t *state, unsigned int cpu) +{ + int enable_bit, pci_offset, ret; + uint32_t val; + + ret = amd_fam14h_get_pci_info(state, &pci_offset, &enable_bit, cpu); + if (ret) + return ret; + + val = pci_read_long(amd_fam14h_pci_dev, pci_offset); + dprint("%s: offset: 0x%x %u\n", state->name, pci_offset, val); + if (state->id == NBP1) { + /* was the bit whether NBP1 got entered set? */ + nbp1_entered = (val & (1 << PCI_NBP1_ACTIVE_BIT)) | + (val & (1 << PCI_NBP1_ENTERED_BIT)); + + dprint("NBP1 was %sentered - 0x%x - enable_bit: " + "%d - pci_offset: 0x%x\n", + nbp1_entered ? "" : "not ", + val, enable_bit, pci_offset); + return ret; + } + current_count[state->id][cpu] = val; + + dprint("%s: Current - %llu (%u)\n", state->name, + current_count[state->id][cpu], cpu); + dprint("%s: Previous - %llu (%u)\n", state->name, + previous_count[state->id][cpu], cpu); + + val = pci_read_long(amd_fam14h_pci_dev, PCI_MONITOR_ENABLE_REG); + val &= ~(1 << enable_bit); + pci_write_long(amd_fam14h_pci_dev, PCI_MONITOR_ENABLE_REG, val); + + return 0; +} + +static int fam14h_nbp1_count(unsigned int id, unsigned long long *count, + unsigned int cpu) +{ + if (id == NBP1) { + if (nbp1_entered) + *count = 1; + else + *count = 0; + return 0; + } + return -1; +} +static int fam14h_get_count_percent(unsigned int id, double *percent, + unsigned int cpu) +{ + unsigned long diff; + + if (id >= AMD_FAM14H_STATE_NUM) + return -1; + /* residency count in 80ns -> divide through 12.5 to get us residency */ + diff = current_count[id][cpu] - previous_count[id][cpu]; + + if (timediff == 0) + *percent = 0.0; + else + *percent = 100.0 * diff / timediff / 12.5; + + dprint("Timediff: %llu - res~: %lu us - percent: %.2f %%\n", + timediff, diff * 10 / 125, *percent); + + return 0; +} + +static int amd_fam14h_start(void) +{ + int num, cpu; + clock_gettime(CLOCK_REALTIME, &start_time); + for (num = 0; num < AMD_FAM14H_STATE_NUM; num++) { + for (cpu = 0; cpu < cpu_count; cpu++) + amd_fam14h_init(&amd_fam14h_cstates[num], cpu); + } +#ifdef DEBUG + clock_gettime(CLOCK_REALTIME, &dbg_time); + dbg_timediff = timespec_diff_us(start_time, dbg_time); + dprint("Enabling counters took: %lu us\n", + dbg_timediff); +#endif + return 0; +} + +static int amd_fam14h_stop(void) +{ + int num, cpu; + struct timespec end_time; + + clock_gettime(CLOCK_REALTIME, &end_time); + + for (num = 0; num < AMD_FAM14H_STATE_NUM; num++) { + for (cpu = 0; cpu < cpu_count; cpu++) + amd_fam14h_disable(&amd_fam14h_cstates[num], cpu); + } +#ifdef DEBUG + clock_gettime(CLOCK_REALTIME, &dbg_time); + dbg_timediff = timespec_diff_us(end_time, dbg_time); + dprint("Disabling counters took: %lu ns\n", dbg_timediff); +#endif + timediff = timespec_diff_us(start_time, end_time); + if (timediff / 1000 > OVERFLOW_MS) + print_overflow_err((unsigned int)timediff / 1000000, + OVERFLOW_MS / 1000); + + return 0; +} + +static int is_nbp1_capable(void) +{ + uint32_t val; + val = pci_read_long(amd_fam14h_pci_dev, PCI_NBP1_CAP_OFFSET); + return val & (1 << 31); +} + +struct cpuidle_monitor *amd_fam14h_register(void) +{ + int num; + + if (cpupower_cpu_info.vendor != X86_VENDOR_AMD) + return NULL; + + if (cpupower_cpu_info.family == 0x14) + strncpy(amd_fam14h_monitor.name, "Fam_14h", + MONITOR_NAME_LEN - 1); + else if (cpupower_cpu_info.family == 0x12) + strncpy(amd_fam14h_monitor.name, "Fam_12h", + MONITOR_NAME_LEN - 1); + else + return NULL; + + /* We do not alloc for nbp1 machine wide counter */ + for (num = 0; num < AMD_FAM14H_STATE_NUM - 1; num++) { + previous_count[num] = calloc(cpu_count, + sizeof(unsigned long long)); + current_count[num] = calloc(cpu_count, + sizeof(unsigned long long)); + } + + /* We need PCI device: Slot 18, Func 6, compare with BKDG + for fam 12h/14h */ + amd_fam14h_pci_dev = pci_slot_func_init(&pci_acc, 0x18, 6); + if (amd_fam14h_pci_dev == NULL || pci_acc == NULL) + return NULL; + + if (!is_nbp1_capable()) + amd_fam14h_monitor.hw_states_num = AMD_FAM14H_STATE_NUM - 1; + + amd_fam14h_monitor.name_len = strlen(amd_fam14h_monitor.name); + return &amd_fam14h_monitor; +} + +static void amd_fam14h_unregister(void) +{ + int num; + for (num = 0; num < AMD_FAM14H_STATE_NUM - 1; num++) { + free(previous_count[num]); + free(current_count[num]); + } + pci_cleanup(pci_acc); +} + +struct cpuidle_monitor amd_fam14h_monitor = { + .name = "", + .hw_states = amd_fam14h_cstates, + .hw_states_num = AMD_FAM14H_STATE_NUM, + .start = amd_fam14h_start, + .stop = amd_fam14h_stop, + .do_register = amd_fam14h_register, + .unregister = amd_fam14h_unregister, + .flags.needs_root = 1, + .overflow_s = OVERFLOW_MS / 1000, +}; +#endif /* #if defined(__i386__) || defined(__x86_64__) */ diff --git a/tools/power/cpupower/utils/idle_monitor/cpuidle_sysfs.c b/tools/power/cpupower/utils/idle_monitor/cpuidle_sysfs.c new file mode 100644 index 000000000..8b42c2f0a --- /dev/null +++ b/tools/power/cpupower/utils/idle_monitor/cpuidle_sysfs.c @@ -0,0 +1,212 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * (C) 2010,2011 Thomas Renninger <trenn@suse.de>, Novell Inc + */ + +#include <stdio.h> +#include <stdlib.h> +#include <stdint.h> +#include <string.h> +#include <limits.h> +#include <cpuidle.h> + +#include "helpers/helpers.h" +#include "idle_monitor/cpupower-monitor.h" + +#define CPUIDLE_STATES_MAX 10 +static cstate_t cpuidle_cstates[CPUIDLE_STATES_MAX]; +struct cpuidle_monitor cpuidle_sysfs_monitor; + +static unsigned long long **previous_count; +static unsigned long long **current_count; +static struct timespec start_time; +static unsigned long long timediff; + +static int cpuidle_get_count_percent(unsigned int id, double *percent, + unsigned int cpu) +{ + unsigned long long statediff = current_count[cpu][id] + - previous_count[cpu][id]; + dprint("%s: - diff: %llu - percent: %f (%u)\n", + cpuidle_cstates[id].name, timediff, *percent, cpu); + + if (timediff == 0) + *percent = 0.0; + else + *percent = ((100.0 * statediff) / timediff); + + dprint("%s: - timediff: %llu - statediff: %llu - percent: %f (%u)\n", + cpuidle_cstates[id].name, timediff, statediff, *percent, cpu); + + return 0; +} + +static int cpuidle_start(void) +{ + int cpu, state; + clock_gettime(CLOCK_REALTIME, &start_time); + for (cpu = 0; cpu < cpu_count; cpu++) { + for (state = 0; state < cpuidle_sysfs_monitor.hw_states_num; + state++) { + previous_count[cpu][state] = + cpuidle_state_time(cpu, state); + dprint("CPU %d - State: %d - Val: %llu\n", + cpu, state, previous_count[cpu][state]); + } + } + return 0; +} + +static int cpuidle_stop(void) +{ + int cpu, state; + struct timespec end_time; + clock_gettime(CLOCK_REALTIME, &end_time); + timediff = timespec_diff_us(start_time, end_time); + + for (cpu = 0; cpu < cpu_count; cpu++) { + for (state = 0; state < cpuidle_sysfs_monitor.hw_states_num; + state++) { + current_count[cpu][state] = + cpuidle_state_time(cpu, state); + dprint("CPU %d - State: %d - Val: %llu\n", + cpu, state, previous_count[cpu][state]); + } + } + return 0; +} + +void fix_up_intel_idle_driver_name(char *tmp, int num) +{ + /* fix up cpuidle name for intel idle driver */ + if (!strncmp(tmp, "NHM-", 4)) { + switch (num) { + case 1: + strcpy(tmp, "C1"); + break; + case 2: + strcpy(tmp, "C3"); + break; + case 3: + strcpy(tmp, "C6"); + break; + } + } else if (!strncmp(tmp, "SNB-", 4)) { + switch (num) { + case 1: + strcpy(tmp, "C1"); + break; + case 2: + strcpy(tmp, "C3"); + break; + case 3: + strcpy(tmp, "C6"); + break; + case 4: + strcpy(tmp, "C7"); + break; + } + } else if (!strncmp(tmp, "ATM-", 4)) { + switch (num) { + case 1: + strcpy(tmp, "C1"); + break; + case 2: + strcpy(tmp, "C2"); + break; + case 3: + strcpy(tmp, "C4"); + break; + case 4: + strcpy(tmp, "C6"); + break; + } + } +} + +#ifdef __powerpc__ +void map_power_idle_state_name(char *tmp) +{ + if (!strncmp(tmp, "stop0_lite", CSTATE_NAME_LEN)) + strcpy(tmp, "stop0L"); + else if (!strncmp(tmp, "stop1_lite", CSTATE_NAME_LEN)) + strcpy(tmp, "stop1L"); + else if (!strncmp(tmp, "stop2_lite", CSTATE_NAME_LEN)) + strcpy(tmp, "stop2L"); +} +#else +void map_power_idle_state_name(char *tmp) { } +#endif + +static struct cpuidle_monitor *cpuidle_register(void) +{ + int num; + char *tmp; + int this_cpu; + + this_cpu = sched_getcpu(); + + /* Assume idle state count is the same for all CPUs */ + cpuidle_sysfs_monitor.hw_states_num = cpuidle_state_count(this_cpu); + + if (cpuidle_sysfs_monitor.hw_states_num <= 0) + return NULL; + + for (num = 0; num < cpuidle_sysfs_monitor.hw_states_num; num++) { + tmp = cpuidle_state_name(this_cpu, num); + if (tmp == NULL) + continue; + + map_power_idle_state_name(tmp); + fix_up_intel_idle_driver_name(tmp, num); + strncpy(cpuidle_cstates[num].name, tmp, CSTATE_NAME_LEN - 1); + free(tmp); + + tmp = cpuidle_state_desc(this_cpu, num); + if (tmp == NULL) + continue; + strncpy(cpuidle_cstates[num].desc, tmp, CSTATE_DESC_LEN - 1); + free(tmp); + + cpuidle_cstates[num].range = RANGE_THREAD; + cpuidle_cstates[num].id = num; + cpuidle_cstates[num].get_count_percent = + cpuidle_get_count_percent; + } + + /* Free this at program termination */ + previous_count = malloc(sizeof(long long *) * cpu_count); + current_count = malloc(sizeof(long long *) * cpu_count); + for (num = 0; num < cpu_count; num++) { + previous_count[num] = malloc(sizeof(long long) * + cpuidle_sysfs_monitor.hw_states_num); + current_count[num] = malloc(sizeof(long long) * + cpuidle_sysfs_monitor.hw_states_num); + } + + cpuidle_sysfs_monitor.name_len = strlen(cpuidle_sysfs_monitor.name); + return &cpuidle_sysfs_monitor; +} + +void cpuidle_unregister(void) +{ + int num; + + for (num = 0; num < cpu_count; num++) { + free(previous_count[num]); + free(current_count[num]); + } + free(previous_count); + free(current_count); +} + +struct cpuidle_monitor cpuidle_sysfs_monitor = { + .name = "Idle_Stats", + .hw_states = cpuidle_cstates, + .start = cpuidle_start, + .stop = cpuidle_stop, + .do_register = cpuidle_register, + .unregister = cpuidle_unregister, + .flags.needs_root = 0, + .overflow_s = UINT_MAX, +}; diff --git a/tools/power/cpupower/utils/idle_monitor/cpupower-monitor.c b/tools/power/cpupower/utils/idle_monitor/cpupower-monitor.c new file mode 100644 index 000000000..7c77045fe --- /dev/null +++ b/tools/power/cpupower/utils/idle_monitor/cpupower-monitor.c @@ -0,0 +1,467 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * (C) 2010,2011 Thomas Renninger <trenn@suse.de>, Novell Inc. + * + * Output format inspired by Len Brown's <lenb@kernel.org> turbostat tool. + */ + + +#include <stdio.h> +#include <unistd.h> +#include <stdlib.h> +#include <string.h> +#include <time.h> +#include <signal.h> +#include <sys/types.h> +#include <sys/wait.h> +#include <libgen.h> + +#include "idle_monitor/cpupower-monitor.h" +#include "idle_monitor/idle_monitors.h" +#include "helpers/helpers.h" + +/* Define pointers to all monitors. */ +#define DEF(x) & x ## _monitor , +struct cpuidle_monitor *all_monitors[] = { +#include "idle_monitors.def" +0 +}; + +int cpu_count; + +static struct cpuidle_monitor *monitors[MONITORS_MAX]; +static unsigned int avail_monitors; + +static char *progname; + +enum operation_mode_e { list = 1, show, show_all }; +static int mode; +static int interval = 1; +static char *show_monitors_param; +static struct cpupower_topology cpu_top; +static unsigned int wake_cpus; + +/* ToDo: Document this in the manpage */ +static char range_abbr[RANGE_MAX] = { 'T', 'C', 'P', 'M', }; + +static void print_wrong_arg_exit(void) +{ + printf(_("invalid or unknown argument\n")); + exit(EXIT_FAILURE); +} + +long long timespec_diff_us(struct timespec start, struct timespec end) +{ + struct timespec temp; + if ((end.tv_nsec - start.tv_nsec) < 0) { + temp.tv_sec = end.tv_sec - start.tv_sec - 1; + temp.tv_nsec = 1000000000 + end.tv_nsec - start.tv_nsec; + } else { + temp.tv_sec = end.tv_sec - start.tv_sec; + temp.tv_nsec = end.tv_nsec - start.tv_nsec; + } + return (temp.tv_sec * 1000000) + (temp.tv_nsec / 1000); +} + +void print_n_spaces(int n) +{ + int x; + for (x = 0; x < n; x++) + printf(" "); +} + +/*s is filled with left and right spaces + *to make its length atleast n+1 + */ +int fill_string_with_spaces(char *s, int n) +{ + char *temp; + int len = strlen(s); + + if (len >= n) + return -1; + + temp = malloc(sizeof(char) * (n+1)); + for (; len < n; len++) + s[len] = ' '; + s[len] = '\0'; + snprintf(temp, n+1, " %s", s); + strcpy(s, temp); + free(temp); + return 0; +} + +#define MAX_COL_WIDTH 6 +void print_header(int topology_depth) +{ + int unsigned mon; + int state, need_len; + cstate_t s; + char buf[128] = ""; + + fill_string_with_spaces(buf, topology_depth * 5 - 1); + printf("%s|", buf); + + for (mon = 0; mon < avail_monitors; mon++) { + need_len = monitors[mon]->hw_states_num * (MAX_COL_WIDTH + 1) + - 1; + if (mon != 0) + printf("||"); + sprintf(buf, "%s", monitors[mon]->name); + fill_string_with_spaces(buf, need_len); + printf("%s", buf); + } + printf("\n"); + + if (topology_depth > 2) + printf(" PKG|"); + if (topology_depth > 1) + printf("CORE|"); + if (topology_depth > 0) + printf(" CPU|"); + + for (mon = 0; mon < avail_monitors; mon++) { + if (mon != 0) + printf("||"); + for (state = 0; state < monitors[mon]->hw_states_num; state++) { + if (state != 0) + printf("|"); + s = monitors[mon]->hw_states[state]; + sprintf(buf, "%s", s.name); + fill_string_with_spaces(buf, MAX_COL_WIDTH); + printf("%s", buf); + } + printf(" "); + } + printf("\n"); +} + + +void print_results(int topology_depth, int cpu) +{ + unsigned int mon; + int state, ret; + double percent; + unsigned long long result; + cstate_t s; + + /* Be careful CPUs may got resorted for pkg value do not just use cpu */ + if (!bitmask_isbitset(cpus_chosen, cpu_top.core_info[cpu].cpu)) + return; + if (!cpu_top.core_info[cpu].is_online && + cpu_top.core_info[cpu].pkg == -1) + return; + + if (topology_depth > 2) + printf("%4d|", cpu_top.core_info[cpu].pkg); + if (topology_depth > 1) + printf("%4d|", cpu_top.core_info[cpu].core); + if (topology_depth > 0) + printf("%4d|", cpu_top.core_info[cpu].cpu); + + for (mon = 0; mon < avail_monitors; mon++) { + if (mon != 0) + printf("||"); + + for (state = 0; state < monitors[mon]->hw_states_num; state++) { + if (state != 0) + printf("|"); + + s = monitors[mon]->hw_states[state]; + + if (s.get_count_percent) { + ret = s.get_count_percent(s.id, &percent, + cpu_top.core_info[cpu].cpu); + if (ret) + printf("******"); + else if (percent >= 100.0) + printf("%6.1f", percent); + else + printf("%6.2f", percent); + } else if (s.get_count) { + ret = s.get_count(s.id, &result, + cpu_top.core_info[cpu].cpu); + if (ret) + printf("******"); + else + printf("%6llu", result); + } else { + printf(_("Monitor %s, Counter %s has no count " + "function. Implementation error\n"), + monitors[mon]->name, s.name); + exit(EXIT_FAILURE); + } + } + } + /* + * The monitor could still provide useful data, for example + * AMD HW counters partly sit in PCI config space. + * It's up to the monitor plug-in to check .is_online, this one + * is just for additional info. + */ + if (!cpu_top.core_info[cpu].is_online && + cpu_top.core_info[cpu].pkg != -1) { + printf(_(" *is offline\n")); + return; + } else + printf("\n"); +} + + +/* param: string passed by -m param (The list of monitors to show) + * + * Monitors must have been registered already, matching monitors + * are picked out and available monitors array is overridden + * with matching ones + * + * Monitors get sorted in the same order the user passes them +*/ + +static void parse_monitor_param(char *param) +{ + unsigned int num; + int mon, hits = 0; + char *tmp = param, *token; + struct cpuidle_monitor *tmp_mons[MONITORS_MAX]; + + + for (mon = 0; mon < MONITORS_MAX; mon++, tmp = NULL) { + token = strtok(tmp, ","); + if (token == NULL) + break; + if (strlen(token) >= MONITOR_NAME_LEN) { + printf(_("%s: max monitor name length" + " (%d) exceeded\n"), token, MONITOR_NAME_LEN); + continue; + } + + for (num = 0; num < avail_monitors; num++) { + if (!strcmp(monitors[num]->name, token)) { + dprint("Found requested monitor: %s\n", token); + tmp_mons[hits] = monitors[num]; + hits++; + } + } + } + if (hits == 0) { + printf(_("No matching monitor found in %s, " + "try -l option\n"), param); + exit(EXIT_FAILURE); + } + /* Override detected/registerd monitors array with requested one */ + memcpy(monitors, tmp_mons, + sizeof(struct cpuidle_monitor *) * MONITORS_MAX); + avail_monitors = hits; +} + +void list_monitors(void) +{ + unsigned int mon; + int state; + cstate_t s; + + for (mon = 0; mon < avail_monitors; mon++) { + printf(_("Monitor \"%s\" (%d states) - Might overflow after %u " + "s\n"), + monitors[mon]->name, monitors[mon]->hw_states_num, + monitors[mon]->overflow_s); + + for (state = 0; state < monitors[mon]->hw_states_num; state++) { + s = monitors[mon]->hw_states[state]; + /* + * ToDo show more state capabilities: + * percent, time (granlarity) + */ + printf("%s\t[%c] -> %s\n", s.name, range_abbr[s.range], + gettext(s.desc)); + } + } +} + +int fork_it(char **argv) +{ + int status; + unsigned int num; + unsigned long long timediff; + pid_t child_pid; + struct timespec start, end; + + child_pid = fork(); + clock_gettime(CLOCK_REALTIME, &start); + + for (num = 0; num < avail_monitors; num++) + monitors[num]->start(); + + if (!child_pid) { + /* child */ + execvp(argv[0], argv); + } else { + /* parent */ + if (child_pid == -1) { + perror("fork"); + exit(1); + } + + signal(SIGINT, SIG_IGN); + signal(SIGQUIT, SIG_IGN); + if (waitpid(child_pid, &status, 0) == -1) { + perror("wait"); + exit(1); + } + } + clock_gettime(CLOCK_REALTIME, &end); + for (num = 0; num < avail_monitors; num++) + monitors[num]->stop(); + + timediff = timespec_diff_us(start, end); + if (WIFEXITED(status)) + printf(_("%s took %.5f seconds and exited with status %d\n"), + argv[0], timediff / (1000.0 * 1000), + WEXITSTATUS(status)); + return 0; +} + +int do_interval_measure(int i) +{ + unsigned int num; + int cpu; + + if (wake_cpus) + for (cpu = 0; cpu < cpu_count; cpu++) + bind_cpu(cpu); + + for (num = 0; num < avail_monitors; num++) { + dprint("HW C-state residency monitor: %s - States: %d\n", + monitors[num]->name, monitors[num]->hw_states_num); + monitors[num]->start(); + } + + sleep(i); + + if (wake_cpus) + for (cpu = 0; cpu < cpu_count; cpu++) + bind_cpu(cpu); + + for (num = 0; num < avail_monitors; num++) + monitors[num]->stop(); + + + return 0; +} + +static void cmdline(int argc, char *argv[]) +{ + int opt; + progname = basename(argv[0]); + + while ((opt = getopt(argc, argv, "+lci:m:")) != -1) { + switch (opt) { + case 'l': + if (mode) + print_wrong_arg_exit(); + mode = list; + break; + case 'i': + /* only allow -i with -m or no option */ + if (mode && mode != show) + print_wrong_arg_exit(); + interval = atoi(optarg); + break; + case 'm': + if (mode) + print_wrong_arg_exit(); + mode = show; + show_monitors_param = optarg; + break; + case 'c': + wake_cpus = 1; + break; + default: + print_wrong_arg_exit(); + } + } + if (!mode) + mode = show_all; +} + +int cmd_monitor(int argc, char **argv) +{ + unsigned int num; + struct cpuidle_monitor *test_mon; + int cpu; + + cmdline(argc, argv); + cpu_count = get_cpu_topology(&cpu_top); + if (cpu_count < 0) { + printf(_("Cannot read number of available processors\n")); + return EXIT_FAILURE; + } + + if (!cpu_top.core_info[0].is_online) + printf("WARNING: at least one cpu is offline\n"); + + /* Default is: monitor all CPUs */ + if (bitmask_isallclear(cpus_chosen)) + bitmask_setall(cpus_chosen); + + dprint("System has up to %d CPU cores\n", cpu_count); + + for (num = 0; all_monitors[num]; num++) { + dprint("Try to register: %s\n", all_monitors[num]->name); + test_mon = all_monitors[num]->do_register(); + if (test_mon) { + if (test_mon->flags.needs_root && !run_as_root) { + fprintf(stderr, _("Available monitor %s needs " + "root access\n"), test_mon->name); + continue; + } + monitors[avail_monitors] = test_mon; + dprint("%s registered\n", all_monitors[num]->name); + avail_monitors++; + } + } + + if (avail_monitors == 0) { + printf(_("No HW Cstate monitors found\n")); + return 1; + } + + if (mode == list) { + list_monitors(); + exit(EXIT_SUCCESS); + } + + if (mode == show) + parse_monitor_param(show_monitors_param); + + dprint("Packages: %d - Cores: %d - CPUs: %d\n", + cpu_top.pkgs, cpu_top.cores, cpu_count); + + /* + * if any params left, it must be a command to fork + */ + if (argc - optind) + fork_it(argv + optind); + else + do_interval_measure(interval); + + /* ToDo: Topology parsing needs fixing first to do + this more generically */ + if (cpu_top.pkgs > 1) + print_header(3); + else + print_header(1); + + for (cpu = 0; cpu < cpu_count; cpu++) { + if (cpu_top.pkgs > 1) + print_results(3, cpu); + else + print_results(1, cpu); + } + + for (num = 0; num < avail_monitors; num++) + monitors[num]->unregister(); + + cpu_topology_release(cpu_top); + return 0; +} diff --git a/tools/power/cpupower/utils/idle_monitor/cpupower-monitor.h b/tools/power/cpupower/utils/idle_monitor/cpupower-monitor.h new file mode 100644 index 000000000..c559d3115 --- /dev/null +++ b/tools/power/cpupower/utils/idle_monitor/cpupower-monitor.h @@ -0,0 +1,95 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * (C) 2010,2011 Thomas Renninger <trenn@suse.de>, Novell Inc. + */ + +#ifndef __CPUIDLE_INFO_HW__ +#define __CPUIDLE_INFO_HW__ + +#include <stdarg.h> +#include <time.h> + +#include "idle_monitor/idle_monitors.h" + +#define MONITORS_MAX 20 +#define MONITOR_NAME_LEN 20 + +/* CSTATE_NAME_LEN is limited by header field width defined + * in cpupower-monitor.c. Header field width is defined to be + * sum of percent width and two spaces for padding. + */ +#ifdef __powerpc__ +#define CSTATE_NAME_LEN 7 +#else +#define CSTATE_NAME_LEN 5 +#endif +#define CSTATE_DESC_LEN 60 + +extern int cpu_count; + +/* Hard to define the right names ...: */ +enum power_range_e { + RANGE_THREAD, /* Lowest in topology hierarcy, AMD: core, Intel: thread + kernel sysfs: cpu */ + RANGE_CORE, /* AMD: unit, Intel: core, kernel_sysfs: core_id */ + RANGE_PACKAGE, /* Package, processor socket */ + RANGE_MACHINE, /* Machine, platform wide */ + RANGE_MAX }; + +typedef struct cstate { + int id; + enum power_range_e range; + char name[CSTATE_NAME_LEN]; + char desc[CSTATE_DESC_LEN]; + + /* either provide a percentage or a general count */ + int (*get_count_percent)(unsigned int self_id, double *percent, + unsigned int cpu); + int (*get_count)(unsigned int self_id, unsigned long long *count, + unsigned int cpu); +} cstate_t; + +struct cpuidle_monitor { + /* Name must not contain whitespaces */ + char name[MONITOR_NAME_LEN]; + int name_len; + int hw_states_num; + cstate_t *hw_states; + int (*start) (void); + int (*stop) (void); + struct cpuidle_monitor* (*do_register) (void); + void (*unregister)(void); + unsigned int overflow_s; + struct { + unsigned int needs_root:1; + unsigned int per_cpu_schedule:1; + } flags; +}; + +extern long long timespec_diff_us(struct timespec start, struct timespec end); + +#define print_overflow_err(mes, ov) \ +{ \ + fprintf(stderr, gettext("Measure took %u seconds, but registers could " \ + "overflow at %u seconds, results " \ + "could be inaccurate\n"), mes, ov); \ +} + + +/* Taken over from x86info project sources -> return 0 on success */ +#include <sched.h> +#include <sys/types.h> +#include <unistd.h> +static inline int bind_cpu(int cpu) +{ + cpu_set_t set; + + if (sched_getaffinity(getpid(), sizeof(set), &set) == 0) { + CPU_ZERO(&set); + CPU_SET(cpu, &set); + return sched_setaffinity(getpid(), sizeof(set), &set); + } + return 1; +} + +#endif /* __CPUIDLE_INFO_HW__ */ diff --git a/tools/power/cpupower/utils/idle_monitor/hsw_ext_idle.c b/tools/power/cpupower/utils/idle_monitor/hsw_ext_idle.c new file mode 100644 index 000000000..55e55b6b4 --- /dev/null +++ b/tools/power/cpupower/utils/idle_monitor/hsw_ext_idle.c @@ -0,0 +1,194 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * (C) 2010,2011 Thomas Renninger <trenn@suse.de>, Novell Inc. + * + * Based on SandyBridge monitor. Implements the new package C-states + * (PC8, PC9, PC10) coming with a specific Haswell (family 0x45) CPU. + */ + +#if defined(__i386__) || defined(__x86_64__) + +#include <stdio.h> +#include <stdint.h> +#include <stdlib.h> +#include <string.h> + +#include "helpers/helpers.h" +#include "idle_monitor/cpupower-monitor.h" + +#define MSR_PKG_C8_RESIDENCY 0x00000630 +#define MSR_PKG_C9_RESIDENCY 0x00000631 +#define MSR_PKG_C10_RESIDENCY 0x00000632 + +#define MSR_TSC 0x10 + +enum intel_hsw_ext_id { PC8 = 0, PC9, PC10, HSW_EXT_CSTATE_COUNT, + TSC = 0xFFFF }; + +static int hsw_ext_get_count_percent(unsigned int self_id, double *percent, + unsigned int cpu); + +static cstate_t hsw_ext_cstates[HSW_EXT_CSTATE_COUNT] = { + { + .name = "PC8", + .desc = N_("Processor Package C8"), + .id = PC8, + .range = RANGE_PACKAGE, + .get_count_percent = hsw_ext_get_count_percent, + }, + { + .name = "PC9", + .desc = N_("Processor Package C9"), + .id = PC9, + .range = RANGE_PACKAGE, + .get_count_percent = hsw_ext_get_count_percent, + }, + { + .name = "PC10", + .desc = N_("Processor Package C10"), + .id = PC10, + .range = RANGE_PACKAGE, + .get_count_percent = hsw_ext_get_count_percent, + }, +}; + +static unsigned long long tsc_at_measure_start; +static unsigned long long tsc_at_measure_end; +static unsigned long long *previous_count[HSW_EXT_CSTATE_COUNT]; +static unsigned long long *current_count[HSW_EXT_CSTATE_COUNT]; +/* valid flag for all CPUs. If a MSR read failed it will be zero */ +static int *is_valid; + +static int hsw_ext_get_count(enum intel_hsw_ext_id id, unsigned long long *val, + unsigned int cpu) +{ + int msr; + + switch (id) { + case PC8: + msr = MSR_PKG_C8_RESIDENCY; + break; + case PC9: + msr = MSR_PKG_C9_RESIDENCY; + break; + case PC10: + msr = MSR_PKG_C10_RESIDENCY; + break; + case TSC: + msr = MSR_TSC; + break; + default: + return -1; + } + if (read_msr(cpu, msr, val)) + return -1; + return 0; +} + +static int hsw_ext_get_count_percent(unsigned int id, double *percent, + unsigned int cpu) +{ + *percent = 0.0; + + if (!is_valid[cpu]) + return -1; + + *percent = (100.0 * + (current_count[id][cpu] - previous_count[id][cpu])) / + (tsc_at_measure_end - tsc_at_measure_start); + + dprint("%s: previous: %llu - current: %llu - (%u)\n", + hsw_ext_cstates[id].name, previous_count[id][cpu], + current_count[id][cpu], cpu); + + dprint("%s: tsc_diff: %llu - count_diff: %llu - percent: %2.f (%u)\n", + hsw_ext_cstates[id].name, + (unsigned long long) tsc_at_measure_end - tsc_at_measure_start, + current_count[id][cpu] - previous_count[id][cpu], + *percent, cpu); + + return 0; +} + +static int hsw_ext_start(void) +{ + int num, cpu; + unsigned long long val; + + for (num = 0; num < HSW_EXT_CSTATE_COUNT; num++) { + for (cpu = 0; cpu < cpu_count; cpu++) { + hsw_ext_get_count(num, &val, cpu); + previous_count[num][cpu] = val; + } + } + hsw_ext_get_count(TSC, &tsc_at_measure_start, base_cpu); + return 0; +} + +static int hsw_ext_stop(void) +{ + unsigned long long val; + int num, cpu; + + hsw_ext_get_count(TSC, &tsc_at_measure_end, base_cpu); + + for (num = 0; num < HSW_EXT_CSTATE_COUNT; num++) { + for (cpu = 0; cpu < cpu_count; cpu++) { + is_valid[cpu] = !hsw_ext_get_count(num, &val, cpu); + current_count[num][cpu] = val; + } + } + return 0; +} + +struct cpuidle_monitor intel_hsw_ext_monitor; + +static struct cpuidle_monitor *hsw_ext_register(void) +{ + int num; + + if (cpupower_cpu_info.vendor != X86_VENDOR_INTEL + || cpupower_cpu_info.family != 6) + return NULL; + + switch (cpupower_cpu_info.model) { + case 0x45: /* HSW */ + break; + default: + return NULL; + } + + is_valid = calloc(cpu_count, sizeof(int)); + for (num = 0; num < HSW_EXT_CSTATE_COUNT; num++) { + previous_count[num] = calloc(cpu_count, + sizeof(unsigned long long)); + current_count[num] = calloc(cpu_count, + sizeof(unsigned long long)); + } + intel_hsw_ext_monitor.name_len = strlen(intel_hsw_ext_monitor.name); + return &intel_hsw_ext_monitor; +} + +void hsw_ext_unregister(void) +{ + int num; + free(is_valid); + for (num = 0; num < HSW_EXT_CSTATE_COUNT; num++) { + free(previous_count[num]); + free(current_count[num]); + } +} + +struct cpuidle_monitor intel_hsw_ext_monitor = { + .name = "HaswellExtended", + .hw_states = hsw_ext_cstates, + .hw_states_num = HSW_EXT_CSTATE_COUNT, + .start = hsw_ext_start, + .stop = hsw_ext_stop, + .do_register = hsw_ext_register, + .unregister = hsw_ext_unregister, + .flags.needs_root = 1, + .overflow_s = 922000000 /* 922337203 seconds TSC overflow + at 20GHz */ +}; +#endif /* defined(__i386__) || defined(__x86_64__) */ diff --git a/tools/power/cpupower/utils/idle_monitor/idle_monitors.def b/tools/power/cpupower/utils/idle_monitor/idle_monitors.def new file mode 100644 index 000000000..0d6ba4dbb --- /dev/null +++ b/tools/power/cpupower/utils/idle_monitor/idle_monitors.def @@ -0,0 +1,8 @@ +#if defined(__i386__) || defined(__x86_64__) +DEF(amd_fam14h) +DEF(intel_nhm) +DEF(intel_snb) +DEF(intel_hsw_ext) +DEF(mperf) +#endif +DEF(cpuidle_sysfs) diff --git a/tools/power/cpupower/utils/idle_monitor/idle_monitors.h b/tools/power/cpupower/utils/idle_monitor/idle_monitors.h new file mode 100644 index 000000000..e9e567ec8 --- /dev/null +++ b/tools/power/cpupower/utils/idle_monitor/idle_monitors.h @@ -0,0 +1,16 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * (C) 2010,2011 Thomas Renninger <trenn@suse.de>, Novell Inc. + * + * Based on the idea from Michael Matz <matz@suse.de> + */ + +#ifndef _CPUIDLE_IDLE_MONITORS_H_ +#define _CPUIDLE_IDLE_MONITORS_H_ + +#define DEF(x) extern struct cpuidle_monitor x ##_monitor; +#include "idle_monitors.def" +#undef DEF +extern struct cpuidle_monitor *all_monitors[]; + +#endif /* _CPUIDLE_IDLE_MONITORS_H_ */ diff --git a/tools/power/cpupower/utils/idle_monitor/mperf_monitor.c b/tools/power/cpupower/utils/idle_monitor/mperf_monitor.c new file mode 100644 index 000000000..ae6af354a --- /dev/null +++ b/tools/power/cpupower/utils/idle_monitor/mperf_monitor.c @@ -0,0 +1,379 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * (C) 2010,2011 Thomas Renninger <trenn@suse.de>, Novell Inc. + */ + +#if defined(__i386__) || defined(__x86_64__) + +#include <stdio.h> +#include <stdint.h> +#include <stdlib.h> +#include <string.h> +#include <limits.h> + +#include <cpufreq.h> + +#include "helpers/helpers.h" +#include "idle_monitor/cpupower-monitor.h" + +#define MSR_APERF 0xE8 +#define MSR_MPERF 0xE7 + +#define RDPRU ".byte 0x0f, 0x01, 0xfd" +#define RDPRU_ECX_MPERF 0 +#define RDPRU_ECX_APERF 1 + +#define MSR_TSC 0x10 + +#define MSR_AMD_HWCR 0xc0010015 + +enum mperf_id { C0 = 0, Cx, AVG_FREQ, MPERF_CSTATE_COUNT }; + +static int mperf_get_count_percent(unsigned int self_id, double *percent, + unsigned int cpu); +static int mperf_get_count_freq(unsigned int id, unsigned long long *count, + unsigned int cpu); +static struct timespec time_start, time_end; + +static cstate_t mperf_cstates[MPERF_CSTATE_COUNT] = { + { + .name = "C0", + .desc = N_("Processor Core not idle"), + .id = C0, + .range = RANGE_THREAD, + .get_count_percent = mperf_get_count_percent, + }, + { + .name = "Cx", + .desc = N_("Processor Core in an idle state"), + .id = Cx, + .range = RANGE_THREAD, + .get_count_percent = mperf_get_count_percent, + }, + + { + .name = "Freq", + .desc = N_("Average Frequency (including boost) in MHz"), + .id = AVG_FREQ, + .range = RANGE_THREAD, + .get_count = mperf_get_count_freq, + }, +}; + +enum MAX_FREQ_MODE { MAX_FREQ_SYSFS, MAX_FREQ_TSC_REF }; +static int max_freq_mode; +/* + * The max frequency mperf is ticking at (in C0), either retrieved via: + * 1) calculated after measurements if we know TSC ticks at mperf/P0 frequency + * 2) cpufreq /sys/devices/.../cpu0/cpufreq/cpuinfo_max_freq at init time + * 1. Is preferred as it also works without cpufreq subsystem (e.g. on Xen) + */ +static unsigned long max_frequency; + +static unsigned long long *tsc_at_measure_start; +static unsigned long long *tsc_at_measure_end; +static unsigned long long *mperf_previous_count; +static unsigned long long *aperf_previous_count; +static unsigned long long *mperf_current_count; +static unsigned long long *aperf_current_count; + +/* valid flag for all CPUs. If a MSR read failed it will be zero */ +static int *is_valid; + +static int mperf_get_tsc(unsigned long long *tsc) +{ + int ret; + + ret = read_msr(base_cpu, MSR_TSC, tsc); + if (ret) + dprint("Reading TSC MSR failed, returning %llu\n", *tsc); + return ret; +} + +static int get_aperf_mperf(int cpu, unsigned long long *aval, + unsigned long long *mval) +{ + unsigned long low_a, high_a; + unsigned long low_m, high_m; + int ret; + + /* + * Running on the cpu from which we read the registers will + * prevent APERF/MPERF from going out of sync because of IPI + * latency introduced by read_msr()s. + */ + if (mperf_monitor.flags.per_cpu_schedule) { + if (bind_cpu(cpu)) + return 1; + } + + if (cpupower_cpu_info.caps & CPUPOWER_CAP_AMD_RDPRU) { + asm volatile(RDPRU + : "=a" (low_a), "=d" (high_a) + : "c" (RDPRU_ECX_APERF)); + asm volatile(RDPRU + : "=a" (low_m), "=d" (high_m) + : "c" (RDPRU_ECX_MPERF)); + + *aval = ((low_a) | (high_a) << 32); + *mval = ((low_m) | (high_m) << 32); + + return 0; + } + + ret = read_msr(cpu, MSR_APERF, aval); + ret |= read_msr(cpu, MSR_MPERF, mval); + + return ret; +} + +static int mperf_init_stats(unsigned int cpu) +{ + unsigned long long aval, mval; + int ret; + + ret = get_aperf_mperf(cpu, &aval, &mval); + aperf_previous_count[cpu] = aval; + mperf_previous_count[cpu] = mval; + is_valid[cpu] = !ret; + + return 0; +} + +static int mperf_measure_stats(unsigned int cpu) +{ + unsigned long long aval, mval; + int ret; + + ret = get_aperf_mperf(cpu, &aval, &mval); + aperf_current_count[cpu] = aval; + mperf_current_count[cpu] = mval; + is_valid[cpu] = !ret; + + return 0; +} + +static int mperf_get_count_percent(unsigned int id, double *percent, + unsigned int cpu) +{ + unsigned long long aperf_diff, mperf_diff, tsc_diff; + unsigned long long timediff; + + if (!is_valid[cpu]) + return -1; + + if (id != C0 && id != Cx) + return -1; + + mperf_diff = mperf_current_count[cpu] - mperf_previous_count[cpu]; + aperf_diff = aperf_current_count[cpu] - aperf_previous_count[cpu]; + + if (max_freq_mode == MAX_FREQ_TSC_REF) { + tsc_diff = tsc_at_measure_end[cpu] - tsc_at_measure_start[cpu]; + *percent = 100.0 * mperf_diff / tsc_diff; + dprint("%s: TSC Ref - mperf_diff: %llu, tsc_diff: %llu\n", + mperf_cstates[id].name, mperf_diff, tsc_diff); + } else if (max_freq_mode == MAX_FREQ_SYSFS) { + timediff = max_frequency * timespec_diff_us(time_start, time_end); + *percent = 100.0 * mperf_diff / timediff; + dprint("%s: MAXFREQ - mperf_diff: %llu, time_diff: %llu\n", + mperf_cstates[id].name, mperf_diff, timediff); + } else + return -1; + + if (id == Cx) + *percent = 100.0 - *percent; + + dprint("%s: previous: %llu - current: %llu - (%u)\n", + mperf_cstates[id].name, mperf_diff, aperf_diff, cpu); + dprint("%s: %f\n", mperf_cstates[id].name, *percent); + return 0; +} + +static int mperf_get_count_freq(unsigned int id, unsigned long long *count, + unsigned int cpu) +{ + unsigned long long aperf_diff, mperf_diff, time_diff, tsc_diff; + + if (id != AVG_FREQ) + return 1; + + if (!is_valid[cpu]) + return -1; + + mperf_diff = mperf_current_count[cpu] - mperf_previous_count[cpu]; + aperf_diff = aperf_current_count[cpu] - aperf_previous_count[cpu]; + + if (max_freq_mode == MAX_FREQ_TSC_REF) { + /* Calculate max_freq from TSC count */ + tsc_diff = tsc_at_measure_end[cpu] - tsc_at_measure_start[cpu]; + time_diff = timespec_diff_us(time_start, time_end); + max_frequency = tsc_diff / time_diff; + } + + *count = max_frequency * ((double)aperf_diff / mperf_diff); + dprint("%s: Average freq based on %s maximum frequency:\n", + mperf_cstates[id].name, + (max_freq_mode == MAX_FREQ_TSC_REF) ? "TSC calculated" : "sysfs read"); + dprint("max_frequency: %lu\n", max_frequency); + dprint("aperf_diff: %llu\n", aperf_diff); + dprint("mperf_diff: %llu\n", mperf_diff); + dprint("avg freq: %llu\n", *count); + return 0; +} + +static int mperf_start(void) +{ + int cpu; + + clock_gettime(CLOCK_REALTIME, &time_start); + + for (cpu = 0; cpu < cpu_count; cpu++) { + mperf_get_tsc(&tsc_at_measure_start[cpu]); + mperf_init_stats(cpu); + } + + return 0; +} + +static int mperf_stop(void) +{ + int cpu; + + for (cpu = 0; cpu < cpu_count; cpu++) { + mperf_measure_stats(cpu); + mperf_get_tsc(&tsc_at_measure_end[cpu]); + } + + clock_gettime(CLOCK_REALTIME, &time_end); + return 0; +} + +/* + * Mperf register is defined to tick at P0 (maximum) frequency + * + * Instead of reading out P0 which can be tricky to read out from HW, + * we use TSC counter if it reliably ticks at P0/mperf frequency. + * + * Still try to fall back to: + * /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_max_freq + * on older Intel HW without invariant TSC feature. + * Or on AMD machines where TSC does not tick at P0 (do not exist yet, but + * it's still double checked (MSR_AMD_HWCR)). + * + * On these machines the user would still get useful mperf + * stats when acpi-cpufreq driver is loaded. + */ +static int init_maxfreq_mode(void) +{ + int ret; + unsigned long long hwcr; + unsigned long min; + + if (!(cpupower_cpu_info.caps & CPUPOWER_CAP_INV_TSC)) + goto use_sysfs; + + if (cpupower_cpu_info.vendor == X86_VENDOR_AMD || + cpupower_cpu_info.vendor == X86_VENDOR_HYGON) { + /* MSR_AMD_HWCR tells us whether TSC runs at P0/mperf + * freq. + * A test whether hwcr is accessable/available would be: + * (cpupower_cpu_info.family > 0x10 || + * cpupower_cpu_info.family == 0x10 && + * cpupower_cpu_info.model >= 0x2)) + * This should be the case for all aperf/mperf + * capable AMD machines and is therefore safe to test here. + * Compare with Linus kernel git commit: acf01734b1747b1ec4 + */ + ret = read_msr(0, MSR_AMD_HWCR, &hwcr); + /* + * If the MSR read failed, assume a Xen system that did + * not explicitly provide access to it and assume TSC works + */ + if (ret != 0) { + dprint("TSC read 0x%x failed - assume TSC working\n", + MSR_AMD_HWCR); + return 0; + } else if (1 & (hwcr >> 24)) { + max_freq_mode = MAX_FREQ_TSC_REF; + return 0; + } else { /* Use sysfs max frequency if available */ } + } else if (cpupower_cpu_info.vendor == X86_VENDOR_INTEL) { + /* + * On Intel we assume mperf (in C0) is ticking at same + * rate than TSC + */ + max_freq_mode = MAX_FREQ_TSC_REF; + return 0; + } +use_sysfs: + if (cpufreq_get_hardware_limits(0, &min, &max_frequency)) { + dprint("Cannot retrieve max freq from cpufreq kernel " + "subsystem\n"); + return -1; + } + max_freq_mode = MAX_FREQ_SYSFS; + max_frequency /= 1000; /* Default automatically to MHz value */ + return 0; +} + +/* + * This monitor provides: + * + * 1) Average frequency a CPU resided in + * This always works if the CPU has aperf/mperf capabilities + * + * 2) C0 and Cx (any sleep state) time a CPU resided in + * Works if mperf timer stops ticking in sleep states which + * seem to be the case on all current HW. + * Both is directly retrieved from HW registers and is independent + * from kernel statistics. + */ +struct cpuidle_monitor mperf_monitor; +struct cpuidle_monitor *mperf_register(void) +{ + if (!(cpupower_cpu_info.caps & CPUPOWER_CAP_APERF)) + return NULL; + + if (init_maxfreq_mode()) + return NULL; + + if (cpupower_cpu_info.vendor == X86_VENDOR_AMD) + mperf_monitor.flags.per_cpu_schedule = 1; + + /* Free this at program termination */ + is_valid = calloc(cpu_count, sizeof(int)); + mperf_previous_count = calloc(cpu_count, sizeof(unsigned long long)); + aperf_previous_count = calloc(cpu_count, sizeof(unsigned long long)); + mperf_current_count = calloc(cpu_count, sizeof(unsigned long long)); + aperf_current_count = calloc(cpu_count, sizeof(unsigned long long)); + tsc_at_measure_start = calloc(cpu_count, sizeof(unsigned long long)); + tsc_at_measure_end = calloc(cpu_count, sizeof(unsigned long long)); + mperf_monitor.name_len = strlen(mperf_monitor.name); + return &mperf_monitor; +} + +void mperf_unregister(void) +{ + free(mperf_previous_count); + free(aperf_previous_count); + free(mperf_current_count); + free(aperf_current_count); + free(tsc_at_measure_start); + free(tsc_at_measure_end); + free(is_valid); +} + +struct cpuidle_monitor mperf_monitor = { + .name = "Mperf", + .hw_states_num = MPERF_CSTATE_COUNT, + .hw_states = mperf_cstates, + .start = mperf_start, + .stop = mperf_stop, + .do_register = mperf_register, + .unregister = mperf_unregister, + .flags.needs_root = 1, + .overflow_s = 922000000 /* 922337203 seconds TSC overflow + at 20GHz */ +}; +#endif /* #if defined(__i386__) || defined(__x86_64__) */ diff --git a/tools/power/cpupower/utils/idle_monitor/nhm_idle.c b/tools/power/cpupower/utils/idle_monitor/nhm_idle.c new file mode 100644 index 000000000..16eaf006f --- /dev/null +++ b/tools/power/cpupower/utils/idle_monitor/nhm_idle.c @@ -0,0 +1,215 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * (C) 2010,2011 Thomas Renninger <trenn@suse.de>, Novell Inc. + * + * Based on Len Brown's <lenb@kernel.org> turbostat tool. + */ + +#if defined(__i386__) || defined(__x86_64__) + +#include <stdio.h> +#include <stdint.h> +#include <stdlib.h> +#include <string.h> + +#include "helpers/helpers.h" +#include "idle_monitor/cpupower-monitor.h" + +#define MSR_PKG_C3_RESIDENCY 0x3F8 +#define MSR_PKG_C6_RESIDENCY 0x3F9 +#define MSR_CORE_C3_RESIDENCY 0x3FC +#define MSR_CORE_C6_RESIDENCY 0x3FD + +#define MSR_TSC 0x10 + +#define NHM_CSTATE_COUNT 4 + +enum intel_nhm_id { C3 = 0, C6, PC3, PC6, TSC = 0xFFFF }; + +static int nhm_get_count_percent(unsigned int self_id, double *percent, + unsigned int cpu); + +static cstate_t nhm_cstates[NHM_CSTATE_COUNT] = { + { + .name = "C3", + .desc = N_("Processor Core C3"), + .id = C3, + .range = RANGE_CORE, + .get_count_percent = nhm_get_count_percent, + }, + { + .name = "C6", + .desc = N_("Processor Core C6"), + .id = C6, + .range = RANGE_CORE, + .get_count_percent = nhm_get_count_percent, + }, + + { + .name = "PC3", + .desc = N_("Processor Package C3"), + .id = PC3, + .range = RANGE_PACKAGE, + .get_count_percent = nhm_get_count_percent, + }, + { + .name = "PC6", + .desc = N_("Processor Package C6"), + .id = PC6, + .range = RANGE_PACKAGE, + .get_count_percent = nhm_get_count_percent, + }, +}; + +static unsigned long long tsc_at_measure_start; +static unsigned long long tsc_at_measure_end; +static unsigned long long *previous_count[NHM_CSTATE_COUNT]; +static unsigned long long *current_count[NHM_CSTATE_COUNT]; +/* valid flag for all CPUs. If a MSR read failed it will be zero */ +static int *is_valid; + +static int nhm_get_count(enum intel_nhm_id id, unsigned long long *val, + unsigned int cpu) +{ + int msr; + + switch (id) { + case C3: + msr = MSR_CORE_C3_RESIDENCY; + break; + case C6: + msr = MSR_CORE_C6_RESIDENCY; + break; + case PC3: + msr = MSR_PKG_C3_RESIDENCY; + break; + case PC6: + msr = MSR_PKG_C6_RESIDENCY; + break; + case TSC: + msr = MSR_TSC; + break; + default: + return -1; + } + if (read_msr(cpu, msr, val)) + return -1; + + return 0; +} + +static int nhm_get_count_percent(unsigned int id, double *percent, + unsigned int cpu) +{ + *percent = 0.0; + + if (!is_valid[cpu]) + return -1; + + *percent = (100.0 * + (current_count[id][cpu] - previous_count[id][cpu])) / + (tsc_at_measure_end - tsc_at_measure_start); + + dprint("%s: previous: %llu - current: %llu - (%u)\n", + nhm_cstates[id].name, previous_count[id][cpu], + current_count[id][cpu], cpu); + + dprint("%s: tsc_diff: %llu - count_diff: %llu - percent: %2.f (%u)\n", + nhm_cstates[id].name, + (unsigned long long) tsc_at_measure_end - tsc_at_measure_start, + current_count[id][cpu] - previous_count[id][cpu], + *percent, cpu); + + return 0; +} + +static int nhm_start(void) +{ + int num, cpu; + unsigned long long dbg, val; + + nhm_get_count(TSC, &tsc_at_measure_start, base_cpu); + + for (num = 0; num < NHM_CSTATE_COUNT; num++) { + for (cpu = 0; cpu < cpu_count; cpu++) { + is_valid[cpu] = !nhm_get_count(num, &val, cpu); + previous_count[num][cpu] = val; + } + } + nhm_get_count(TSC, &dbg, base_cpu); + dprint("TSC diff: %llu\n", dbg - tsc_at_measure_start); + return 0; +} + +static int nhm_stop(void) +{ + unsigned long long val; + unsigned long long dbg; + int num, cpu; + + nhm_get_count(TSC, &tsc_at_measure_end, base_cpu); + + for (num = 0; num < NHM_CSTATE_COUNT; num++) { + for (cpu = 0; cpu < cpu_count; cpu++) { + is_valid[cpu] = !nhm_get_count(num, &val, cpu); + current_count[num][cpu] = val; + } + } + nhm_get_count(TSC, &dbg, base_cpu); + dprint("TSC diff: %llu\n", dbg - tsc_at_measure_end); + + return 0; +} + +struct cpuidle_monitor intel_nhm_monitor; + +struct cpuidle_monitor *intel_nhm_register(void) +{ + int num; + + if (cpupower_cpu_info.vendor != X86_VENDOR_INTEL) + return NULL; + + if (!(cpupower_cpu_info.caps & CPUPOWER_CAP_INV_TSC)) + return NULL; + + if (!(cpupower_cpu_info.caps & CPUPOWER_CAP_APERF)) + return NULL; + + /* Free this at program termination */ + is_valid = calloc(cpu_count, sizeof(int)); + for (num = 0; num < NHM_CSTATE_COUNT; num++) { + previous_count[num] = calloc(cpu_count, + sizeof(unsigned long long)); + current_count[num] = calloc(cpu_count, + sizeof(unsigned long long)); + } + + intel_nhm_monitor.name_len = strlen(intel_nhm_monitor.name); + return &intel_nhm_monitor; +} + +void intel_nhm_unregister(void) +{ + int num; + + for (num = 0; num < NHM_CSTATE_COUNT; num++) { + free(previous_count[num]); + free(current_count[num]); + } + free(is_valid); +} + +struct cpuidle_monitor intel_nhm_monitor = { + .name = "Nehalem", + .hw_states_num = NHM_CSTATE_COUNT, + .hw_states = nhm_cstates, + .start = nhm_start, + .stop = nhm_stop, + .do_register = intel_nhm_register, + .unregister = intel_nhm_unregister, + .flags.needs_root = 1, + .overflow_s = 922000000 /* 922337203 seconds TSC overflow + at 20GHz */ +}; +#endif diff --git a/tools/power/cpupower/utils/idle_monitor/snb_idle.c b/tools/power/cpupower/utils/idle_monitor/snb_idle.c new file mode 100644 index 000000000..811d63ab1 --- /dev/null +++ b/tools/power/cpupower/utils/idle_monitor/snb_idle.c @@ -0,0 +1,199 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * (C) 2010,2011 Thomas Renninger <trenn@suse.de>, Novell Inc. + * + * Based on Len Brown's <lenb@kernel.org> turbostat tool. + */ + +#if defined(__i386__) || defined(__x86_64__) + +#include <stdio.h> +#include <stdint.h> +#include <stdlib.h> +#include <string.h> + +#include "helpers/helpers.h" +#include "idle_monitor/cpupower-monitor.h" + +#define MSR_PKG_C2_RESIDENCY 0x60D +#define MSR_PKG_C7_RESIDENCY 0x3FA +#define MSR_CORE_C7_RESIDENCY 0x3FE + +#define MSR_TSC 0x10 + +enum intel_snb_id { C7 = 0, PC2, PC7, SNB_CSTATE_COUNT, TSC = 0xFFFF }; + +static int snb_get_count_percent(unsigned int self_id, double *percent, + unsigned int cpu); + +static cstate_t snb_cstates[SNB_CSTATE_COUNT] = { + { + .name = "C7", + .desc = N_("Processor Core C7"), + .id = C7, + .range = RANGE_CORE, + .get_count_percent = snb_get_count_percent, + }, + { + .name = "PC2", + .desc = N_("Processor Package C2"), + .id = PC2, + .range = RANGE_PACKAGE, + .get_count_percent = snb_get_count_percent, + }, + { + .name = "PC7", + .desc = N_("Processor Package C7"), + .id = PC7, + .range = RANGE_PACKAGE, + .get_count_percent = snb_get_count_percent, + }, +}; + +static unsigned long long tsc_at_measure_start; +static unsigned long long tsc_at_measure_end; +static unsigned long long *previous_count[SNB_CSTATE_COUNT]; +static unsigned long long *current_count[SNB_CSTATE_COUNT]; +/* valid flag for all CPUs. If a MSR read failed it will be zero */ +static int *is_valid; + +static int snb_get_count(enum intel_snb_id id, unsigned long long *val, + unsigned int cpu) +{ + int msr; + + switch (id) { + case C7: + msr = MSR_CORE_C7_RESIDENCY; + break; + case PC2: + msr = MSR_PKG_C2_RESIDENCY; + break; + case PC7: + msr = MSR_PKG_C7_RESIDENCY; + break; + case TSC: + msr = MSR_TSC; + break; + default: + return -1; + } + if (read_msr(cpu, msr, val)) + return -1; + return 0; +} + +static int snb_get_count_percent(unsigned int id, double *percent, + unsigned int cpu) +{ + *percent = 0.0; + + if (!is_valid[cpu]) + return -1; + + *percent = (100.0 * + (current_count[id][cpu] - previous_count[id][cpu])) / + (tsc_at_measure_end - tsc_at_measure_start); + + dprint("%s: previous: %llu - current: %llu - (%u)\n", + snb_cstates[id].name, previous_count[id][cpu], + current_count[id][cpu], cpu); + + dprint("%s: tsc_diff: %llu - count_diff: %llu - percent: %2.f (%u)\n", + snb_cstates[id].name, + (unsigned long long) tsc_at_measure_end - tsc_at_measure_start, + current_count[id][cpu] - previous_count[id][cpu], + *percent, cpu); + + return 0; +} + +static int snb_start(void) +{ + int num, cpu; + unsigned long long val; + + for (num = 0; num < SNB_CSTATE_COUNT; num++) { + for (cpu = 0; cpu < cpu_count; cpu++) { + snb_get_count(num, &val, cpu); + previous_count[num][cpu] = val; + } + } + snb_get_count(TSC, &tsc_at_measure_start, base_cpu); + return 0; +} + +static int snb_stop(void) +{ + unsigned long long val; + int num, cpu; + + snb_get_count(TSC, &tsc_at_measure_end, base_cpu); + + for (num = 0; num < SNB_CSTATE_COUNT; num++) { + for (cpu = 0; cpu < cpu_count; cpu++) { + is_valid[cpu] = !snb_get_count(num, &val, cpu); + current_count[num][cpu] = val; + } + } + return 0; +} + +struct cpuidle_monitor intel_snb_monitor; + +static struct cpuidle_monitor *snb_register(void) +{ + int num; + + if (cpupower_cpu_info.vendor != X86_VENDOR_INTEL + || cpupower_cpu_info.family != 6) + return NULL; + + switch (cpupower_cpu_info.model) { + case 0x2A: /* SNB */ + case 0x2D: /* SNB Xeon */ + case 0x3A: /* IVB */ + case 0x3E: /* IVB Xeon */ + case 0x3C: /* HSW */ + case 0x3F: /* HSW */ + case 0x45: /* HSW */ + case 0x46: /* HSW */ + break; + default: + return NULL; + } + + is_valid = calloc(cpu_count, sizeof(int)); + for (num = 0; num < SNB_CSTATE_COUNT; num++) { + previous_count[num] = calloc(cpu_count, + sizeof(unsigned long long)); + current_count[num] = calloc(cpu_count, + sizeof(unsigned long long)); + } + intel_snb_monitor.name_len = strlen(intel_snb_monitor.name); + return &intel_snb_monitor; +} + +void snb_unregister(void) +{ + int num; + free(is_valid); + for (num = 0; num < SNB_CSTATE_COUNT; num++) { + free(previous_count[num]); + free(current_count[num]); + } +} + +struct cpuidle_monitor intel_snb_monitor = { + .name = "SandyBridge", + .hw_states = snb_cstates, + .hw_states_num = SNB_CSTATE_COUNT, + .start = snb_start, + .stop = snb_stop, + .do_register = snb_register, + .unregister = snb_unregister, + .flags.needs_root = 1, + .overflow_s = 922000000 /* 922337203 seconds TSC overflow + at 20GHz */ +}; +#endif /* defined(__i386__) || defined(__x86_64__) */ diff --git a/tools/power/cpupower/utils/version-gen.sh b/tools/power/cpupower/utils/version-gen.sh new file mode 100755 index 000000000..c70de2eab --- /dev/null +++ b/tools/power/cpupower/utils/version-gen.sh @@ -0,0 +1,36 @@ +#!/bin/sh +# SPDX-License-Identifier: GPL-2.0 +# +# Script which prints out the version to use for building cpupowerutils. +# Must be called from tools/power/cpupower/ +# +# Heavily based on tools/perf/util/PERF-VERSION-GEN . + +LF=' +' + +# First check if there is a .git to get the version from git describe +# otherwise try to get the version from the kernel makefile +if test -d ../../../.git -o -f ../../../.git && + VN=$(git describe --abbrev=4 HEAD 2>/dev/null) && + case "$VN" in + *$LF*) (exit 1) ;; + v[0-9]*) + git update-index -q --refresh + test -z "$(git diff-index --name-only HEAD --)" || + VN="$VN-dirty" ;; + esac +then + VN=$(echo "$VN" | sed -e 's/-/./g'); +else + eval $(grep '^VERSION[[:space:]]*=' ../../../Makefile|tr -d ' ') + eval $(grep '^PATCHLEVEL[[:space:]]*=' ../../../Makefile|tr -d ' ') + eval $(grep '^SUBLEVEL[[:space:]]*=' ../../../Makefile|tr -d ' ') + eval $(grep '^EXTRAVERSION[[:space:]]*=' ../../../Makefile|tr -d ' ') + + VN="${VERSION}.${PATCHLEVEL}.${SUBLEVEL}${EXTRAVERSION}" +fi + +VN=$(expr "$VN" : v*'\(.*\)') + +echo $VN diff --git a/tools/power/pm-graph/Makefile b/tools/power/pm-graph/Makefile new file mode 100644 index 000000000..b5310832c --- /dev/null +++ b/tools/power/pm-graph/Makefile @@ -0,0 +1,51 @@ +# SPDX-License-Identifier: GPL-2.0 +PREFIX ?= /usr +DESTDIR ?= + +all: + @echo "Nothing to build" + +install : uninstall + install -d $(DESTDIR)$(PREFIX)/lib/pm-graph + install sleepgraph.py $(DESTDIR)$(PREFIX)/lib/pm-graph + install bootgraph.py $(DESTDIR)$(PREFIX)/lib/pm-graph + install -d $(DESTDIR)$(PREFIX)/lib/pm-graph/config + install -m 644 config/cgskip.txt $(DESTDIR)$(PREFIX)/lib/pm-graph/config + install -m 644 config/freeze-callgraph.cfg $(DESTDIR)$(PREFIX)/lib/pm-graph/config + install -m 644 config/freeze.cfg $(DESTDIR)$(PREFIX)/lib/pm-graph/config + install -m 644 config/freeze-dev.cfg $(DESTDIR)$(PREFIX)/lib/pm-graph/config + install -m 644 config/standby-callgraph.cfg $(DESTDIR)$(PREFIX)/lib/pm-graph/config + install -m 644 config/standby.cfg $(DESTDIR)$(PREFIX)/lib/pm-graph/config + install -m 644 config/standby-dev.cfg $(DESTDIR)$(PREFIX)/lib/pm-graph/config + install -m 644 config/suspend-callgraph.cfg $(DESTDIR)$(PREFIX)/lib/pm-graph/config + install -m 644 config/suspend.cfg $(DESTDIR)$(PREFIX)/lib/pm-graph/config + install -m 644 config/suspend-dev.cfg $(DESTDIR)$(PREFIX)/lib/pm-graph/config + install -m 644 config/suspend-x2-proc.cfg $(DESTDIR)$(PREFIX)/lib/pm-graph/config + + install -d $(DESTDIR)$(PREFIX)/bin + ln -s ../lib/pm-graph/bootgraph.py $(DESTDIR)$(PREFIX)/bin/bootgraph + ln -s ../lib/pm-graph/sleepgraph.py $(DESTDIR)$(PREFIX)/bin/sleepgraph + + install -d $(DESTDIR)$(PREFIX)/share/man/man8 + install bootgraph.8 $(DESTDIR)$(PREFIX)/share/man/man8 + install sleepgraph.8 $(DESTDIR)$(PREFIX)/share/man/man8 + +uninstall : + rm -f $(DESTDIR)$(PREFIX)/share/man/man8/bootgraph.8 + rm -f $(DESTDIR)$(PREFIX)/share/man/man8/sleepgraph.8 + + rm -f $(DESTDIR)$(PREFIX)/bin/bootgraph + rm -f $(DESTDIR)$(PREFIX)/bin/sleepgraph + + rm -f $(DESTDIR)$(PREFIX)/lib/pm-graph/config/* + if [ -d $(DESTDIR)$(PREFIX)/lib/pm-graph/config ] ; then \ + rmdir $(DESTDIR)$(PREFIX)/lib/pm-graph/config; \ + fi; + rm -f $(DESTDIR)$(PREFIX)/lib/pm-graph/__pycache__/* + if [ -d $(DESTDIR)$(PREFIX)/lib/pm-graph/__pycache__ ] ; then \ + rmdir $(DESTDIR)$(PREFIX)/lib/pm-graph/__pycache__; \ + fi; + rm -f $(DESTDIR)$(PREFIX)/lib/pm-graph/* + if [ -d $(DESTDIR)$(PREFIX)/lib/pm-graph ] ; then \ + rmdir $(DESTDIR)$(PREFIX)/lib/pm-graph; \ + fi; diff --git a/tools/power/pm-graph/README b/tools/power/pm-graph/README new file mode 100644 index 000000000..89d0a7dab --- /dev/null +++ b/tools/power/pm-graph/README @@ -0,0 +1,660 @@ + _ + _ __ _ __ ___ __ _ _ __ __ _ _ __ | |__ + | '_ \| '_ ` _ \ _____ / _` | '__/ _` | '_ \| '_ \ + | |_) | | | | | |_____| (_| | | | (_| | |_) | | | | + | .__/|_| |_| |_| \__, |_| \__,_| .__/|_| |_| + |_| |___/ |_| + + pm-graph: suspend/resume/boot timing analysis tools + Version: 5.7 + Author: Todd Brandt <todd.e.brandt@intel.com> + Home Page: https://01.org/pm-graph + + Report bugs/issues at bugzilla.kernel.org Tools/pm-graph + - https://bugzilla.kernel.org/buglist.cgi?component=pm-graph&product=Tools + + Full documentation available online & in man pages + - Getting Started: + https://01.org/pm-graph/documentation/getting-started + + - Config File Format: + https://01.org/pm-graph/documentation/3-config-file-format + + - upstream version in git: + https://github.com/intel/pm-graph/ + + Table of Contents + - Overview + - Setup + - Usage + - Basic Usage + - Dev Mode Usage + - Proc Mode Usage + - Endurance Testing + - Usage Examples + - Configuration Files + - Usage Examples + - Config File Options + - Custom Timeline Entries + - Adding/Editing Timeline Functions + - Adding/Editing Dev Timeline Source Functions + - Verifying your Custom Functions + - Testing on consumer linux Operating Systems + - Android + +------------------------------------------------------------------ +| OVERVIEW | +------------------------------------------------------------------ + + This tool suite is designed to assist kernel and OS developers in optimizing + their linux stack's suspend/resume & boot time. Using a kernel image built + with a few extra options enabled, the tools will execute a suspend or boot, + and will capture dmesg and ftrace data. This data is transformed into a set of + timelines and a callgraph to give a quick and detailed view of which devices + and kernel processes are taking the most time in suspend/resume & boot. + +------------------------------------------------------------------ +| SETUP | +------------------------------------------------------------------ + + Package Requirements + - runs with python2 or python3, choice is made by /usr/bin/python link + - python + - python-configparser (for python2 sleepgraph) + - python-requests (for googlesheet.py) + - linux-tools-common (for turbostat usage in sleepgraph) + + Ubuntu: + sudo apt-get install python python-configparser python-requests linux-tools-common + + Fedora: + sudo dnf install python python-configparser python-requests linux-tools-common + + The tools can most easily be installed via git clone and make install + + $> git clone http://github.com/intel/pm-graph.git + $> cd pm-graph + $> sudo make install + $> man sleepgraph ; man bootgraph + + Setup involves some minor kernel configuration + + The following kernel build options are required for all kernels: + CONFIG_DEVMEM=y + CONFIG_PM_DEBUG=y + CONFIG_PM_SLEEP_DEBUG=y + CONFIG_FTRACE=y + CONFIG_FUNCTION_TRACER=y + CONFIG_FUNCTION_GRAPH_TRACER=y + CONFIG_KPROBES=y + CONFIG_KPROBES_ON_FTRACE=y + + In kernel 3.15.0, two patches were upstreamed which enable the + v3.0 behavior. These patches allow the tool to read all the + data from trace events instead of from dmesg. You can enable + this behavior on earlier kernels with these patches: + + (kernel/pre-3.15/enable_trace_events_suspend_resume.patch) + (kernel/pre-3.15/enable_trace_events_device_pm_callback.patch) + + If you're using a kernel older than 3.15.0, the following + additional kernel parameters are required: + (e.g. in file /etc/default/grub) + GRUB_CMDLINE_LINUX_DEFAULT="... initcall_debug log_buf_len=32M ..." + + If you're using a kernel older than 3.11-rc2, the following simple + patch must be applied to enable ftrace data: + in file: kernel/power/suspend.c + in function: int suspend_devices_and_enter(suspend_state_t state) + remove call to "ftrace_stop();" + remove call to "ftrace_start();" + + There is a patch which does this for kernel v3.8.0: + (kernel/pre-3.11-rc2/enable_ftrace_in_suspendresume.patch) + + + +------------------------------------------------------------------ +| USAGE | +------------------------------------------------------------------ + +Basic Usage +___________ + + 1) First configure a kernel using the instructions from the previous sections. + Then build, install, and boot with it. + 2) Open up a terminal window and execute the mode list command: + + %> sudo ./sleepgraph.py -modes + ['freeze', 'mem', 'disk'] + + Execute a test using one of the available power modes, e.g. mem (S3): + + %> sudo ./sleepgraph.py -m mem -rtcwake 15 + + or with a config file + + %> sudo ./sleepgraph.py -config config/suspend.cfg + + When the system comes back you'll see the script finishing up and + creating the output files in the test subdir. It generates output + files in subdirectory: suspend-mmddyy-HHMMSS. The ftrace file can + be used to regenerate the html timeline with different options + + HTML output: <hostname>_<mode>.html + raw dmesg output: <hostname>_<mode>_dmesg.txt + raw ftrace output: <hostname>_<mode>_ftrace.txt + + View the html in firefox or chrome. + + +Dev Mode Usage +______________ + + Developer mode adds information on low level source calls to the timeline. + The tool sets kprobes on all delay and mutex calls to see which devices + are waiting for something and when. It also sets a suite of kprobes on + subsystem dependent calls to better fill out the timeline. + + The tool will also expose kernel threads that don't normally show up in the + timeline. This is useful in discovering dependent threads to get a better + idea of what each device is waiting for. For instance, the scsi_eh thread, + a.k.a. scsi resume error handler, is what each SATA disk device waits for + before it can continue resume. + + The timeline will be much larger if run with dev mode, so it can be useful + to set the -mindev option to clip out any device blocks that are too small + to see easily. The following command will give a nice dev mode run: + + %> sudo ./sleepgraph.py -m mem -rtcwake 15 -mindev 1 -dev + + or with a config file + + %> sudo ./sleepgraph.py -config config/suspend-dev.cfg + + +Proc Mode Usage +_______________ + + Proc mode adds user process info to the timeline. This is done in a manner + similar to the bootchart utility, which graphs init processes and their + execution as the system boots. This tool option does the same thing but for + the period before and after suspend/resume. + + In order to see any process info, there needs to be some delay before or + after resume since processes are frozen in suspend_prepare and thawed in + resume_complete. The predelay and postdelay args allow you to do this. It + can also be useful to run in x2 mode with an x2 delay, this way you can + see process activity before and after resume, and in between two + successive suspend/resumes. + + The command can be run like this: + + %> sudo ./sleepgraph.py -m mem -rtcwake 15 -x2 -x2delay 1000 -predelay 1000 -postdelay 1000 -proc + + or with a config file + + %> sudo ./sleepgraph.py -config config/suspend-proc.cfg + +------------------------------------------------------------------ +| ENDURANCE TESTING | +------------------------------------------------------------------ + + The best way to gauge the health of a system is to run a series of + suspend/resumes over an extended period and analyze the behavior. This can be + accomplished with sleepgraph's -multi argument. You specify two numbers: the + number of tests to run OR the duration in days, hours, or minutes, and the + delay in seconds between them. For instance, -multi 20 5: execute 20 tests with + a 5 second delay between each, or -multi 24h 0: execute tests over a 24 hour + period with no delay between tests. You can include any other options you like + to generate the data you want. It's most useful to collect dev mode timelines + as the kprobes don't alter the performance much and you get more insight. + + On completion, the output folder contains a series of folders for the + individual test data and a set of summary pages in the root. The summary.html + file is a tabular list of the tests with relevant info and links. The + summary-issue.html and summary-devices.html files include data taken from + all tests on kernel issues and device performance. The folder looks like this: + + suspend-xN-{date}-{time}: + summary.html + summary-issues.html + summary-devices.html + suspend-{date}-{time} (1) + suspend-{date}-{time} (2) + ... + + These are the relevant arguments to use for testing: + + -m mode + Mode to initiate for suspend e.g. mem, freeze, standby (default: mem). + + -rtcwake t + Use rtcwake to autoresume after t seconds (default: 15). + + -gzip (optional) + Gzip the trace and dmesg logs to save space. The tool can also read in + gzipped logs for processing. This reduces the multitest folder size. + + -dev (optional) + Add kernel source calls and threads to the timeline (default: disabled). + + -multi n d + Execute n consecutive tests at d seconds intervals. The outputs will be + created in a new subdirectory: suspend-xN-{date}-{time}. When the multitest + run is done, the -summary command is called automatically to create summary + html files for all the data (unless you use -skiphtml). -skiphtml will + speed up the testing by not creating timelines or summary html files. You + can then run the tool again at a later time with -summary and -genhtml to + create the timelines. + + -skiphtml (optional) + Run the test and capture the trace logs, but skip the timeline and summary + html generation. This can greatly speed up overall testing. You can then + copy the data to a faster host machine and run -summary -genhtml to + generate the timelines and summary. + + These are the relevant commands to use after testing is complete: + + -summary indir + Generate or regenerate the summary for a -multi test run. Creates three + files: summary.html, summary-issues.html, and summary-devices.html in the + current folder. summary.html is a table of tests with relevant info sorted + by kernel/host/mode, and links to the test html files. summary-issues.html + is a list of kernel issues found in dmesg from all the tests. + summary-devices.html is a list of devices and times from all the tests. + + -genhtml + Used with -summary to regenerate any missing html timelines from their + dmesg and ftrace logs. This will require a significant amount of time if + there are thousands of tests. + +Usage Examples +_______________ + + A multitest is initiated like this: + + %> sudo ./sleepgraph.py -m mem -rtcwake 10 -dev -gzip -multi 2000 0 + + or you can skip timeline generation in order to speed things up + + %> sudo ./sleepgraph.py -m mem -rtcwake 10 -dev -gzip -multi 2000 0 -skiphtml + + The tool will produce an output folder with all the test subfolders inside. + Each test subfolder contains the dmesg/ftrace logs and/or the html timeline + depending on whether you used the -skiphtml option. The root folder contains + the summary.html files. + + The summary for an existing multitest is generated like this: + + %> cd suspend-x2000-{date}-{time} + %> sleepgraph.py -summary . + + or if you need to generate the html timelines you can use -genhtml + + %> cd suspend-xN-{date}-{time} + %> sleepgraph.py -summary . -genhtml + +------------------------------------------------------------------ +| CONFIGURATION FILES | +------------------------------------------------------------------ + + Since 4.0 we've moved to using config files in lieu of command line options. + The config folder contains a collection of typical use cases. + There are corresponding configs for other power modes: + + Simple suspend/resume with basic timeline (mem/freeze/standby) + config/suspend.cfg + config/freeze.cfg + config/standby.cfg + + Dev mode suspend/resume with dev timeline (mem/freeze/standby) + config/suspend-dev.cfg + config/freeze-dev.cfg + config/standby-dev.cfg + + Simple suspend/resume with timeline and callgraph (mem/freeze/standby) + config/suspend-callgraph.cfg + config/freeze-callgraph.cfg + config/standby-callgraph.cfg + + Sample proc mode x2 run using mem suspend + config/suspend-x2-proc.cfg + + Sample for editing timeline funcs (moves internal functions into config) + config/custom-timeline-functions.cfg + + Sample debug config for serio subsystem + config/debug-serio-suspend.cfg + + +Usage Examples +______________ + + Run a simple mem suspend: + %> sudo ./sleepgraph.py -config config/suspend.cfg + + Run a mem suspend with callgraph data: + %> sudo ./sleepgraph.py -config config/suspend-callgraph.cfg + + Run a mem suspend with dev mode detail: + %> sudo ./sleepgraph.py -config config/suspend-dev.cfg + + +Config File Options +___________________ + + [Settings] + + # Verbosity: print verbose messages (def: false) + verbose: false + + # Suspend Mode: e.g. standby, mem, freeze, disk (def: mem) + mode: mem + + # Output Directory Format: {hostname}, {date}, {time} give current values + output-dir: suspend-{hostname}-{date}-{time} + + # Automatic Wakeup: use rtcwake to wakeup after X seconds (def: infinity) + rtcwake: 15 + + # Add Logs: add the dmesg and ftrace log to the html output (def: false) + addlogs: false + + # Sus/Res Gap: insert a gap between sus & res in the timeline (def: false) + srgap: false + + # Custom Command: Command to execute in lieu of suspend (def: "") + command: echo mem > /sys/power/state + + # Proc mode: graph user processes and cpu usage in the timeline (def: false) + proc: false + + # Dev mode: graph source functions in the timeline (def: false) + dev: false + + # Suspend/Resume x2: run 2 suspend/resumes back to back (def: false) + x2: false + + # x2 Suspend Delay: time delay between the two test runs in ms (def: 0 ms) + x2delay: 0 + + # Pre Suspend Delay: nclude an N ms delay before (1st) suspend (def: 0 ms) + predelay: 0 + + # Post Resume Delay: include an N ms delay after (last) resume (def: 0 ms) + postdelay: 0 + + # Min Device Length: graph only dev callbacks longer than min (def: 0.001 ms) + mindev: 0.001 + + # Callgraph: gather ftrace callgraph data on all timeline events (def: false) + callgraph: false + + # Expand Callgraph: pre-expand the callgraph treeviews in html (def: false) + expandcg: false + + # Min Callgraph Length: show callgraphs only if longer than min (def: 1 ms) + mincg: 1 + + # Timestamp Precision: number of sig digits in timestamps (0:S, [3:ms], 6:us) + timeprec: 3 + + # Device Filter: show only devs whose name/driver includes one of these strings + devicefilter: _cpu_up,_cpu_down,i915,usb + + # Override default timeline entries: + # Do not use the internal default functions for timeline entries (def: false) + # Set this to true if you intend to only use the ones defined in the config + override-timeline-functions: true + + # Override default dev timeline entries: + # Do not use the internal default functions for dev timeline entries (def: false) + # Set this to true if you intend to only use the ones defined in the config + override-dev-timeline-functions: true + + # Call Loop Max Gap (dev mode only) + # merge loops of the same call if each is less than maxgap apart (def: 100us) + callloop-maxgap: 0.0001 + + # Call Loop Max Length (dev mode only) + # merge loops of the same call if each is less than maxlen in length (def: 5ms) + callloop-maxlen: 0.005 + +------------------------------------------------------------------ +| CUSTOM TIMELINE ENTRIES | +------------------------------------------------------------------ + +Adding or Editing Timeline Functions +____________________________________ + + The tool uses an array of function names to fill out empty spaces in the + timeline where device callbacks don't appear. For instance, in suspend_prepare + the tool adds the sys_sync and freeze_processes calls as virtual device blocks + in the timeline to show you where the time is going. These calls should fill + the timeline with contiguous data so that most kernel execution is covered. + + It is possible to add new function calls to the timeline by adding them to + the config. It's also possible to copy the internal timeline functions into + the config so that you can override and edit them. Place them in the + timeline_functions_ARCH section with the name of your architecture appended. + i.e. for x86_64: [timeline_functions_x86_64] + + Use the override-timeline-functions option if you only want to use your + custom calls, or leave it false to append them to the internal ones. + + This section includes a list of functions (set using kprobes) which use both + symbol data and function arg data. The args are pulled directly from the + stack using this architecture's registers and stack formatting. Each entry + can include up to four pieces of info: The function name, a format string, + an argument list, and a color. But only a function name is required. + + For a full example config, see config/custom-timeline-functions.cfg. It pulls + all the internal timeline functions into the config and allows you to edit + them. + + Entry format: + + function: format{fn_arg1}_{fn_arg2} fn_arg1 fn_arg2 ... [color=purple] + + Required Arguments: + + function: The symbol name for the function you want probed, this is the + minimum required for an entry, it will show up as the function + name with no arguments. + + example: _cpu_up: + + Optional Arguments: + + format: The format to display the data on the timeline in. Use braces to + enclose the arg names. + + example: CPU_ON[{cpu}] + + color: The color of the entry block in the timeline. The default color is + transparent, so the entry shares the phase color. The color is an + html color string, either a word, or an RGB. + + example: [color=#CC00CC] + + arglist: A list of arguments from registers/stack addresses. See URL: + https://www.kernel.org/doc/Documentation/trace/kprobetrace.txt + + example: cpu=%di:s32 + + Here is a full example entry. It displays cpu resume calls in the timeline + in orange. They will appear as CPU_ON[0], CPU_ON[1], etc. + + [timeline_functions_x86_64] + _cpu_up: CPU_ON[{cpu}] cpu=%di:s32 [color=orange] + + +Adding or Editing Dev Mode Timeline Source Functions +____________________________________________________ + + In dev mode, the tool uses an array of function names to monitor source + execution within the timeline entries. + + The function calls are displayed inside the main device/call blocks in the + timeline. However, if a function call is not within a main timeline event, + it will spawn an entirely new event named after the caller's kernel thread. + These asynchronous kernel threads will populate in a separate section + beneath the main device/call section. + + The tool has a set of hard coded calls which focus on the most common use + cases: msleep, udelay, schedule_timeout, mutex_lock_slowpath, etc. These are + the functions that add a hardcoded time delay to the suspend/resume path. + The tool also includes some common functions native to important + subsystems: ata, i915, and ACPI, etc. + + It is possible to add new function calls to the dev timeline by adding them + to the config. It's also possible to copy the internal dev timeline + functions into the config so that you can override and edit them. Place them + in the dev_timeline_functions_ARCH section with the name of your architecture + appended. i.e. for x86_64: [dev_timeline_functions_x86_64] + + Use the override-dev-timeline-functions option if you only want to use your + custom calls, or leave it false to append them to the internal ones. + + The format is the same as the timeline_functions_x86_64 section. It's a + list of functions (set using kprobes) which use both symbol data and function + arg data. The args are pulled directly from the stack using this + architecture's registers and stack formatting. Each entry can include up + to four pieces of info: The function name, a format string, an argument list, + and a color. But only the function name is required. + + For a full example config, see config/custom-timeline-functions.cfg. It pulls + all the internal dev timeline functions into the config and allows you to edit + them. + + Here is a full example entry. It displays the ATA port reset calls as + ataN_port_reset in the timeline. This is where most of the SATA disk resume + time goes, so it can be helpful to see the low level call. + + [dev_timeline_functions_x86_64] + ata_eh_recover: ata{port}_port_reset port=+36(%di):s32 [color=#CC00CC] + + +Verifying your custom functions +_______________________________ + + Once you have a set of functions (kprobes) defined, it can be useful to + perform a quick check to see if you formatted them correctly and if the system + actually supports them. To do this, run the tool with your config file + and the -status option. The tool will go through all the kprobes (both + custom and internal if you haven't overridden them) and actually attempts + to set them in ftrace. It will then print out success or fail for you. + + Note that kprobes which don't actually exist in the kernel won't stop the + tool, they just wont show up. + + For example: + + sudo ./sleepgraph.py -config config/custom-timeline-functions.cfg -status + Checking this system (myhostname)... + have root access: YES + is sysfs mounted: YES + is "mem" a valid power mode: YES + is ftrace supported: YES + are kprobes supported: YES + timeline data source: FTRACE (all trace events found) + is rtcwake supported: YES + verifying timeline kprobes work: + _cpu_down: YES + _cpu_up: YES + acpi_pm_finish: YES + acpi_pm_prepare: YES + freeze_kernel_threads: YES + freeze_processes: YES + sys_sync: YES + thaw_processes: YES + verifying dev kprobes work: + __const_udelay: YES + __mutex_lock_slowpath: YES + acpi_os_stall: YES + acpi_ps_parse_aml: YES + intel_opregion_init: NO + intel_opregion_register: NO + intel_opregion_setup: NO + msleep: YES + schedule_timeout: YES + schedule_timeout_uninterruptible: YES + usleep_range: YES + + +------------------------------------------------------------------ +| TESTING ON CONSUMER LINUX OPERATING SYSTEMS | +------------------------------------------------------------------ + +Android +_______ + + The easiest way to execute on an android device is to run the android.sh + script on the device, then pull the ftrace log back to the host and run + sleepgraph.py on it. + + Here are the steps: + + [download and install the tool on the device] + + host%> wget https://raw.githubusercontent.com/intel/pm-graph/master/tools/android.sh + host%> adb connect 192.168.1.6 + host%> adb root + # push the script to a writeable location + host%> adb push android.sh /sdcard/ + + [check whether the tool will run on your device] + + host%> adb shell + dev%> cd /sdcard + dev%> sh android.sh status + host : asus_t100 + kernel : 3.14.0-i386-dirty + modes : freeze mem + rtcwake : supported + ftrace : supported + trace events { + suspend_resume: found + device_pm_callback_end: found + device_pm_callback_start: found + } + # the above is what you see on a system that's properly patched + + [execute the suspend] + + # NOTE: The suspend will only work if the screen isn't timed out, + # so you have to press some keys first to wake it up b4 suspend) + dev%> sh android.sh suspend mem + ------------------------------------ + Suspend/Resume timing test initiated + ------------------------------------ + hostname : asus_t100 + kernel : 3.14.0-i386-dirty + mode : mem + ftrace out : /mnt/shell/emulated/0/ftrace.txt + dmesg out : /mnt/shell/emulated/0/dmesg.txt + log file : /mnt/shell/emulated/0/log.txt + ------------------------------------ + INITIALIZING FTRACE........DONE + STARTING FTRACE + SUSPEND START @ 21:24:02 (rtcwake in 10 seconds) + <adb connection will now terminate> + + [retrieve the data from the device] + + # I find that you have to actually kill the adb process and + # reconnect sometimes in order for the connection to work post-suspend + host%> adb connect 192.168.1.6 + # (required) get the ftrace data, this is the most important piece + host%> adb pull /sdcard/ftrace.txt + # (optional) get the dmesg data, this is for debugging + host%> adb pull /sdcard/dmesg.txt + # (optional) get the log, which just lists some test times for comparison + host%> adb pull /sdcard/log.txt + + [create an output html file using sleepgraph.py] + + host%> sleepgraph.py -ftrace ftrace.txt + + You should now have an output.html with the android data, enjoy! diff --git a/tools/power/pm-graph/bootgraph.8 b/tools/power/pm-graph/bootgraph.8 new file mode 100644 index 000000000..64d513f80 --- /dev/null +++ b/tools/power/pm-graph/bootgraph.8 @@ -0,0 +1,173 @@ +.TH BOOTGRAPH 8 +.SH NAME +bootgraph \- Kernel boot timing analysis +.SH SYNOPSIS +.ft B +.B bootgraph +.RB [ OPTIONS ] +.RB [ COMMAND ] +.SH DESCRIPTION +\fBbootgraph \fP reads the dmesg log from kernel boot and +creates an html representation of the initcall timeline. It graphs +every module init call found, through both kernel and user modes. The +timeline is split into two phases: kernel mode & user mode. kernel mode +represents a single process run on a single cpu with serial init calls. +Once user mode begins, the init process is called, and the init calls +start working in parallel. +.PP +If no specific command is given, the tool reads the current dmesg log and +outputs a new timeline. +.PP +The tool can also augment the timeline with ftrace data on custom target +functions as well as full trace callgraphs. +.PP +Generates output files in subdirectory: boot-yymmdd-HHMMSS + html timeline : <hostname>_boot.html + raw dmesg file : <hostname>_boot_dmesg.txt + raw ftrace file : <hostname>_boot_ftrace.txt +.SH OPTIONS +.TP +\fB-h\fR +Print this help text +.TP +\fB-v\fR +Print the current tool version +.TP +\fB-addlogs\fR +Add the dmesg log to the html output. It will be viewable by +clicking a button in the timeline. +.TP +\fB-result \fIfile\fR +Export a results table to a text file for parsing. +.TP +\fB-o \fIname\fR +Overrides the output subdirectory name when running a new test. +Use {date}, {time}, {hostname} for current values. +.sp +e.g. boot-{hostname}-{date}-{time} +.SS "advanced" +.TP +\fB-f or -callgraph\fR +Use ftrace to create initcall callgraphs (default: disabled). If -func +is not used there will be one callgraph per initcall. This can produce +very large outputs, i.e. 10MB - 100MB. +.TP +\fB-fstat\fR +Use ftrace to add function detail (default: disabled) +.TP +\fB-maxdepth \fIlevel\fR +limit the callgraph trace depth to \fIlevel\fR (default: 2). This is +the best way to limit the output size when using -callgraph. +.TP +\fB-mincg \fIt\fR +Discard all callgraphs shorter than \fIt\fR milliseconds (default: 0=all). +This reduces the html file size as there can be many tiny callgraphs +which are barely visible in the timeline. +The value is a float: e.g. 0.001 represents 1 us. +.TP +\fB-cgfilter \fI"func1,func2,..."\fR +Reduce callgraph output in the timeline by limiting it to a list of calls. The +argument can be a single function name or a comma delimited list. +(default: none) +.TP +\fB-cgskip \fIfile\fR +Reduce callgraph output in the timeline by skipping over uninteresting +functions in the trace, e.g. printk or console_unlock. The functions listed +in this file will show up as empty leaves in the callgraph with only the start/end +times displayed. +(default: none) +.TP +\fB-timeprec \fIn\fR +Number of significant digits in timestamps (0:S, 3:ms, [6:us]) +.TP +\fB-expandcg\fR +pre-expand the callgraph data in the html output (default: disabled) +.TP +\fB-func \fI"func1,func2,..."\fR +Instead of tracing each initcall, trace a custom list of functions (default: do_one_initcall) +.TP +\fB-reboot\fR +Reboot the machine and generate a new timeline automatically. Works in 4 steps. + 1. updates grub with the required kernel parameters + 2. installs a cron job which re-runs the tool after reboot + 3. reboots the system + 4. after startup, extracts the data and generates the timeline +.TP +\fB-manual\fR +Show the requirements to generate a new timeline manually. Requires 3 steps. + 1. append the string to the kernel command line via your native boot manager. + 2. reboot the system + 3. after startup, re-run the tool with the same arguments and no command + +.SH COMMANDS +.SS "rebuild" +.TP +\fB-dmesg \fIfile\fR +Create HTML output from an existing dmesg file. +.TP +\fB-ftrace \fIfile\fR +Create HTML output from an existing ftrace file (used with -dmesg). +.SS "other" +.TP +\fB-flistall\fR +Print all ftrace functions capable of being captured. These are all the +possible values you can add to trace via the -func argument. +.TP +\fB-sysinfo\fR +Print out system info extracted from BIOS. Reads /dev/mem directly instead of going through dmidecode. + +.SH EXAMPLES +Create a timeline using the current dmesg log. +.IP +\f(CW$ bootgraph\fR +.PP +Create a timeline using the current dmesg and ftrace log. +.IP +\f(CW$ bootgraph -callgraph\fR +.PP +Create a timeline using the current dmesg, add the log to the html and change the folder. +.IP +\f(CW$ bootgraph -addlogs -o "myboot-{date}-{time}"\fR +.PP +Capture a new boot timeline by automatically rebooting the machine. +.IP +\f(CW$ sudo bootgraph -reboot -addlogs -o "latest-{hostname)"\fR +.PP +Capture a new boot timeline with function trace data. +.IP +\f(CW$ sudo bootgraph -reboot -f\fR +.PP +Capture a new boot timeline with trace & callgraph data. Skip callgraphs smaller than 5ms. +.IP +\f(CW$ sudo bootgraph -reboot -callgraph -mincg 5\fR +.PP +Capture a new boot timeline with callgraph data over custom functions. +.IP +\f(CW$ sudo bootgraph -reboot -callgraph -func "acpi_ps_parse_aml,msleep"\fR +.PP +Capture a brand new boot timeline with manual reboot. +.IP +\f(CW$ sudo bootgraph -callgraph -manual\fR +.IP +\f(CW$ vi /etc/default/grub # add the CMDLINE string to your kernel params\fR +.IP +\f(CW$ sudo reboot # reboot the machine\fR +.IP +\f(CW$ sudo bootgraph -callgraph # re-run the tool after restart\fR +.PP +.SS "rebuild timeline from logs" +.PP +Rebuild the html from a previous run's logs, using the same options. +.IP +\f(CW$ bootgraph -dmesg dmesg.txt -ftrace ftrace.txt -callgraph\fR +.PP +Rebuild the html with different options. +.IP +\f(CW$ bootgraph -dmesg dmesg.txt -ftrace ftrace.txt -addlogs\fR + +.SH "SEE ALSO" +dmesg(1), update-grub(8), crontab(1), reboot(8) +.PP +.SH AUTHOR +.nf +Written by Todd Brandt <todd.e.brandt@linux.intel.com> diff --git a/tools/power/pm-graph/bootgraph.py b/tools/power/pm-graph/bootgraph.py new file mode 100755 index 000000000..2823cd312 --- /dev/null +++ b/tools/power/pm-graph/bootgraph.py @@ -0,0 +1,1101 @@ +#!/usr/bin/env python3 +# SPDX-License-Identifier: GPL-2.0-only +# +# Tool for analyzing boot timing +# Copyright (c) 2013, Intel Corporation. +# +# This program is free software; you can redistribute it and/or modify it +# under the terms and conditions of the GNU General Public License, +# version 2, as published by the Free Software Foundation. +# +# This program is distributed in the hope it will be useful, but WITHOUT +# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or +# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for +# more details. +# +# Authors: +# Todd Brandt <todd.e.brandt@linux.intel.com> +# +# Description: +# This tool is designed to assist kernel and OS developers in optimizing +# their linux stack's boot time. It creates an html representation of +# the kernel boot timeline up to the start of the init process. +# + +# ----------------- LIBRARIES -------------------- + +import sys +import time +import os +import string +import re +import platform +import shutil +from datetime import datetime, timedelta +from subprocess import call, Popen, PIPE +import sleepgraph as aslib + +def pprint(msg): + print(msg) + sys.stdout.flush() + +# ----------------- CLASSES -------------------- + +# Class: SystemValues +# Description: +# A global, single-instance container used to +# store system values and test parameters +class SystemValues(aslib.SystemValues): + title = 'BootGraph' + version = '2.2' + hostname = 'localhost' + testtime = '' + kernel = '' + dmesgfile = '' + ftracefile = '' + htmlfile = 'bootgraph.html' + testdir = '' + kparams = '' + result = '' + useftrace = False + usecallgraph = False + suspendmode = 'boot' + max_graph_depth = 2 + graph_filter = 'do_one_initcall' + reboot = False + manual = False + iscronjob = False + timeformat = '%.6f' + bootloader = 'grub' + blexec = [] + def __init__(self): + self.hostname = platform.node() + self.testtime = datetime.now().strftime('%Y-%m-%d_%H:%M:%S') + if os.path.exists('/proc/version'): + fp = open('/proc/version', 'r') + val = fp.read().strip() + fp.close() + self.kernel = self.kernelVersion(val) + else: + self.kernel = 'unknown' + self.testdir = datetime.now().strftime('boot-%y%m%d-%H%M%S') + def kernelVersion(self, msg): + return msg.split()[2] + def checkFtraceKernelVersion(self): + val = tuple(map(int, self.kernel.split('-')[0].split('.'))) + if val >= (4, 10, 0): + return True + return False + def kernelParams(self): + cmdline = 'initcall_debug log_buf_len=32M' + if self.useftrace: + if self.cpucount > 0: + bs = min(self.memtotal // 2, 2*1024*1024) // self.cpucount + else: + bs = 131072 + cmdline += ' trace_buf_size=%dK trace_clock=global '\ + 'trace_options=nooverwrite,funcgraph-abstime,funcgraph-cpu,'\ + 'funcgraph-duration,funcgraph-proc,funcgraph-tail,'\ + 'nofuncgraph-overhead,context-info,graph-time '\ + 'ftrace=function_graph '\ + 'ftrace_graph_max_depth=%d '\ + 'ftrace_graph_filter=%s' % \ + (bs, self.max_graph_depth, self.graph_filter) + return cmdline + def setGraphFilter(self, val): + master = self.getBootFtraceFilterFunctions() + fs = '' + for i in val.split(','): + func = i.strip() + if func == '': + doError('badly formatted filter function string') + if '[' in func or ']' in func: + doError('loadable module functions not allowed - "%s"' % func) + if ' ' in func: + doError('spaces found in filter functions - "%s"' % func) + if func not in master: + doError('function "%s" not available for ftrace' % func) + if not fs: + fs = func + else: + fs += ','+func + if not fs: + doError('badly formatted filter function string') + self.graph_filter = fs + def getBootFtraceFilterFunctions(self): + self.rootCheck(True) + fp = open(self.tpath+'available_filter_functions') + fulllist = fp.read().split('\n') + fp.close() + list = [] + for i in fulllist: + if not i or ' ' in i or '[' in i or ']' in i: + continue + list.append(i) + return list + def myCronJob(self, line): + if '@reboot' not in line: + return False + if 'bootgraph' in line or 'analyze_boot.py' in line or '-cronjob' in line: + return True + return False + def cronjobCmdString(self): + cmdline = '%s -cronjob' % os.path.abspath(sys.argv[0]) + args = iter(sys.argv[1:]) + for arg in args: + if arg in ['-h', '-v', '-cronjob', '-reboot', '-verbose']: + continue + elif arg in ['-o', '-dmesg', '-ftrace', '-func']: + next(args) + continue + elif arg == '-result': + cmdline += ' %s "%s"' % (arg, os.path.abspath(next(args))) + continue + elif arg == '-cgskip': + file = self.configFile(next(args)) + cmdline += ' %s "%s"' % (arg, os.path.abspath(file)) + continue + cmdline += ' '+arg + if self.graph_filter != 'do_one_initcall': + cmdline += ' -func "%s"' % self.graph_filter + cmdline += ' -o "%s"' % os.path.abspath(self.testdir) + return cmdline + def manualRebootRequired(self): + cmdline = self.kernelParams() + pprint('To generate a new timeline manually, follow these steps:\n\n'\ + '1. Add the CMDLINE string to your kernel command line.\n'\ + '2. Reboot the system.\n'\ + '3. After reboot, re-run this tool with the same arguments but no command (w/o -reboot or -manual).\n\n'\ + 'CMDLINE="%s"' % cmdline) + sys.exit() + def blGrub(self): + blcmd = '' + for cmd in ['update-grub', 'grub-mkconfig', 'grub2-mkconfig']: + if blcmd: + break + blcmd = self.getExec(cmd) + if not blcmd: + doError('[GRUB] missing update command') + if not os.path.exists('/etc/default/grub'): + doError('[GRUB] missing /etc/default/grub') + if 'grub2' in blcmd: + cfg = '/boot/grub2/grub.cfg' + else: + cfg = '/boot/grub/grub.cfg' + if not os.path.exists(cfg): + doError('[GRUB] missing %s' % cfg) + if 'update-grub' in blcmd: + self.blexec = [blcmd] + else: + self.blexec = [blcmd, '-o', cfg] + def getBootLoader(self): + if self.bootloader == 'grub': + self.blGrub() + else: + doError('unknown boot loader: %s' % self.bootloader) + def writeDatafileHeader(self, filename): + self.kparams = open('/proc/cmdline', 'r').read().strip() + fp = open(filename, 'w') + fp.write(self.teststamp+'\n') + fp.write(self.sysstamp+'\n') + fp.write('# command | %s\n' % self.cmdline) + fp.write('# kparams | %s\n' % self.kparams) + fp.close() + +sysvals = SystemValues() + +# Class: Data +# Description: +# The primary container for test data. +class Data(aslib.Data): + dmesg = {} # root data structure + start = 0.0 # test start + end = 0.0 # test end + dmesgtext = [] # dmesg text file in memory + testnumber = 0 + idstr = '' + html_device_id = 0 + valid = False + tUserMode = 0.0 + boottime = '' + phases = ['kernel', 'user'] + do_one_initcall = False + def __init__(self, num): + self.testnumber = num + self.idstr = 'a' + self.dmesgtext = [] + self.dmesg = { + 'kernel': {'list': dict(), 'start': -1.0, 'end': -1.0, 'row': 0, + 'order': 0, 'color': 'linear-gradient(to bottom, #fff, #bcf)'}, + 'user': {'list': dict(), 'start': -1.0, 'end': -1.0, 'row': 0, + 'order': 1, 'color': '#fff'} + } + def deviceTopology(self): + return '' + def newAction(self, phase, name, pid, start, end, ret, ulen): + # new device callback for a specific phase + self.html_device_id += 1 + devid = '%s%d' % (self.idstr, self.html_device_id) + list = self.dmesg[phase]['list'] + length = -1.0 + if(start >= 0 and end >= 0): + length = end - start + i = 2 + origname = name + while(name in list): + name = '%s[%d]' % (origname, i) + i += 1 + list[name] = {'name': name, 'start': start, 'end': end, + 'pid': pid, 'length': length, 'row': 0, 'id': devid, + 'ret': ret, 'ulen': ulen } + return name + def deviceMatch(self, pid, cg): + if cg.end - cg.start == 0: + return '' + for p in data.phases: + list = self.dmesg[p]['list'] + for devname in list: + dev = list[devname] + if pid != dev['pid']: + continue + if cg.name == 'do_one_initcall': + if(cg.start <= dev['start'] and cg.end >= dev['end'] and dev['length'] > 0): + dev['ftrace'] = cg + self.do_one_initcall = True + return devname + else: + if(cg.start > dev['start'] and cg.end < dev['end']): + if 'ftraces' not in dev: + dev['ftraces'] = [] + dev['ftraces'].append(cg) + return devname + return '' + def printDetails(self): + sysvals.vprint('Timeline Details:') + sysvals.vprint(' Host: %s' % sysvals.hostname) + sysvals.vprint(' Kernel: %s' % sysvals.kernel) + sysvals.vprint(' Test time: %s' % sysvals.testtime) + sysvals.vprint(' Boot time: %s' % self.boottime) + for phase in self.phases: + dc = len(self.dmesg[phase]['list']) + sysvals.vprint('%9s mode: %.3f - %.3f (%d initcalls)' % (phase, + self.dmesg[phase]['start']*1000, + self.dmesg[phase]['end']*1000, dc)) + +# ----------------- FUNCTIONS -------------------- + +# Function: parseKernelLog +# Description: +# parse a kernel log for boot data +def parseKernelLog(): + sysvals.vprint('Analyzing the dmesg data (%s)...' % \ + os.path.basename(sysvals.dmesgfile)) + phase = 'kernel' + data = Data(0) + data.dmesg['kernel']['start'] = data.start = ktime = 0.0 + sysvals.stamp = { + 'time': datetime.now().strftime('%B %d %Y, %I:%M:%S %p'), + 'host': sysvals.hostname, + 'mode': 'boot', 'kernel': ''} + + tp = aslib.TestProps() + devtemp = dict() + if(sysvals.dmesgfile): + lf = open(sysvals.dmesgfile, 'rb') + else: + lf = Popen('dmesg', stdout=PIPE).stdout + for line in lf: + line = aslib.ascii(line).replace('\r\n', '') + # grab the stamp and sysinfo + if re.match(tp.stampfmt, line): + tp.stamp = line + continue + elif re.match(tp.sysinfofmt, line): + tp.sysinfo = line + continue + elif re.match(tp.cmdlinefmt, line): + tp.cmdline = line + continue + elif re.match(tp.kparamsfmt, line): + tp.kparams = line + continue + idx = line.find('[') + if idx > 1: + line = line[idx:] + m = re.match('[ \t]*(\[ *)(?P<ktime>[0-9\.]*)(\]) (?P<msg>.*)', line) + if(not m): + continue + ktime = float(m.group('ktime')) + if(ktime > 120): + break + msg = m.group('msg') + data.dmesgtext.append(line) + if(ktime == 0.0 and re.match('^Linux version .*', msg)): + if(not sysvals.stamp['kernel']): + sysvals.stamp['kernel'] = sysvals.kernelVersion(msg) + continue + m = re.match('.* setting system clock to (?P<d>[0-9\-]*)[ A-Z](?P<t>[0-9:]*) UTC.*', msg) + if(m): + bt = datetime.strptime(m.group('d')+' '+m.group('t'), '%Y-%m-%d %H:%M:%S') + bt = bt - timedelta(seconds=int(ktime)) + data.boottime = bt.strftime('%Y-%m-%d_%H:%M:%S') + sysvals.stamp['time'] = bt.strftime('%B %d %Y, %I:%M:%S %p') + continue + m = re.match('^calling *(?P<f>.*)\+.* @ (?P<p>[0-9]*)', msg) + if(m): + func = m.group('f') + pid = int(m.group('p')) + devtemp[func] = (ktime, pid) + continue + m = re.match('^initcall *(?P<f>.*)\+.* returned (?P<r>.*) after (?P<t>.*) usecs', msg) + if(m): + data.valid = True + data.end = ktime + f, r, t = m.group('f', 'r', 't') + if(f in devtemp): + start, pid = devtemp[f] + data.newAction(phase, f, pid, start, ktime, int(r), int(t)) + del devtemp[f] + continue + if(re.match('^Freeing unused kernel .*', msg)): + data.tUserMode = ktime + data.dmesg['kernel']['end'] = ktime + data.dmesg['user']['start'] = ktime + phase = 'user' + + if tp.stamp: + sysvals.stamp = 0 + tp.parseStamp(data, sysvals) + data.dmesg['user']['end'] = data.end + lf.close() + return data + +# Function: parseTraceLog +# Description: +# Check if trace is available and copy to a temp file +def parseTraceLog(data): + sysvals.vprint('Analyzing the ftrace data (%s)...' % \ + os.path.basename(sysvals.ftracefile)) + # if available, calculate cgfilter allowable ranges + cgfilter = [] + if len(sysvals.cgfilter) > 0: + for p in data.phases: + list = data.dmesg[p]['list'] + for i in sysvals.cgfilter: + if i in list: + cgfilter.append([list[i]['start']-0.0001, + list[i]['end']+0.0001]) + # parse the trace log + ftemp = dict() + tp = aslib.TestProps() + tp.setTracerType('function_graph') + tf = open(sysvals.ftracefile, 'r') + for line in tf: + if line[0] == '#': + continue + m = re.match(tp.ftrace_line_fmt, line.strip()) + if(not m): + continue + m_time, m_proc, m_pid, m_msg, m_dur = \ + m.group('time', 'proc', 'pid', 'msg', 'dur') + t = float(m_time) + if len(cgfilter) > 0: + allow = False + for r in cgfilter: + if t >= r[0] and t < r[1]: + allow = True + break + if not allow: + continue + if t > data.end: + break + if(m_time and m_pid and m_msg): + t = aslib.FTraceLine(m_time, m_msg, m_dur) + pid = int(m_pid) + else: + continue + if t.fevent or t.fkprobe: + continue + key = (m_proc, pid) + if(key not in ftemp): + ftemp[key] = [] + ftemp[key].append(aslib.FTraceCallGraph(pid, sysvals)) + cg = ftemp[key][-1] + res = cg.addLine(t) + if(res != 0): + ftemp[key].append(aslib.FTraceCallGraph(pid, sysvals)) + if(res == -1): + ftemp[key][-1].addLine(t) + + tf.close() + + # add the callgraph data to the device hierarchy + for key in ftemp: + proc, pid = key + for cg in ftemp[key]: + if len(cg.list) < 1 or cg.invalid or (cg.end - cg.start == 0): + continue + if(not cg.postProcess()): + pprint('Sanity check failed for %s-%d' % (proc, pid)) + continue + # match cg data to devices + devname = data.deviceMatch(pid, cg) + if not devname: + kind = 'Orphan' + if cg.partial: + kind = 'Partial' + sysvals.vprint('%s callgraph found for %s %s-%d [%f - %f]' %\ + (kind, cg.name, proc, pid, cg.start, cg.end)) + elif len(cg.list) > 1000000: + pprint('WARNING: the callgraph found for %s is massive! (%d lines)' %\ + (devname, len(cg.list))) + +# Function: retrieveLogs +# Description: +# Create copies of dmesg and/or ftrace for later processing +def retrieveLogs(): + # check ftrace is configured first + if sysvals.useftrace: + tracer = sysvals.fgetVal('current_tracer').strip() + if tracer != 'function_graph': + doError('ftrace not configured for a boot callgraph') + # create the folder and get dmesg + sysvals.systemInfo(aslib.dmidecode(sysvals.mempath)) + sysvals.initTestOutput('boot') + sysvals.writeDatafileHeader(sysvals.dmesgfile) + call('dmesg >> '+sysvals.dmesgfile, shell=True) + if not sysvals.useftrace: + return + # get ftrace + sysvals.writeDatafileHeader(sysvals.ftracefile) + call('cat '+sysvals.tpath+'trace >> '+sysvals.ftracefile, shell=True) + +# Function: colorForName +# Description: +# Generate a repeatable color from a list for a given name +def colorForName(name): + list = [ + ('c1', '#ec9999'), + ('c2', '#ffc1a6'), + ('c3', '#fff0a6'), + ('c4', '#adf199'), + ('c5', '#9fadea'), + ('c6', '#a699c1'), + ('c7', '#ad99b4'), + ('c8', '#eaffea'), + ('c9', '#dcecfb'), + ('c10', '#ffffea') + ] + i = 0 + total = 0 + count = len(list) + while i < len(name): + total += ord(name[i]) + i += 1 + return list[total % count] + +def cgOverview(cg, minlen): + stats = dict() + large = [] + for l in cg.list: + if l.fcall and l.depth == 1: + if l.length >= minlen: + large.append(l) + if l.name not in stats: + stats[l.name] = [0, 0.0] + stats[l.name][0] += (l.length * 1000.0) + stats[l.name][1] += 1 + return (large, stats) + +# Function: createBootGraph +# Description: +# Create the output html file from the resident test data +# Arguments: +# testruns: array of Data objects from parseKernelLog or parseTraceLog +# Output: +# True if the html file was created, false if it failed +def createBootGraph(data): + # html function templates + html_srccall = '<div id={6} title="{5}" class="srccall" style="left:{1}%;top:{2}px;height:{3}px;width:{4}%;line-height:{3}px;">{0}</div>\n' + html_timetotal = '<table class="time1">\n<tr>'\ + '<td class="blue">Init process starts @ <b>{0} ms</b></td>'\ + '<td class="blue">Last initcall ends @ <b>{1} ms</b></td>'\ + '</tr>\n</table>\n' + + # device timeline + devtl = aslib.Timeline(100, 20) + + # write the test title and general info header + devtl.createHeader(sysvals, sysvals.stamp) + + # Generate the header for this timeline + t0 = data.start + tMax = data.end + tTotal = tMax - t0 + if(tTotal == 0): + pprint('ERROR: No timeline data') + return False + user_mode = '%.0f'%(data.tUserMode*1000) + last_init = '%.0f'%(tTotal*1000) + devtl.html += html_timetotal.format(user_mode, last_init) + + # determine the maximum number of rows we need to draw + devlist = [] + for p in data.phases: + list = data.dmesg[p]['list'] + for devname in list: + d = aslib.DevItem(0, p, list[devname]) + devlist.append(d) + devtl.getPhaseRows(devlist, 0, 'start') + devtl.calcTotalRows() + + # draw the timeline background + devtl.createZoomBox() + devtl.html += devtl.html_tblock.format('boot', '0', '100', devtl.scaleH) + for p in data.phases: + phase = data.dmesg[p] + length = phase['end']-phase['start'] + left = '%.3f' % (((phase['start']-t0)*100.0)/tTotal) + width = '%.3f' % ((length*100.0)/tTotal) + devtl.html += devtl.html_phase.format(left, width, \ + '%.3f'%devtl.scaleH, '%.3f'%devtl.bodyH, \ + phase['color'], '') + + # draw the device timeline + num = 0 + devstats = dict() + for phase in data.phases: + list = data.dmesg[phase]['list'] + for devname in sorted(list): + cls, color = colorForName(devname) + dev = list[devname] + info = '@|%.3f|%.3f|%.3f|%d' % (dev['start']*1000.0, dev['end']*1000.0, + dev['ulen']/1000.0, dev['ret']) + devstats[dev['id']] = {'info':info} + dev['color'] = color + height = devtl.phaseRowHeight(0, phase, dev['row']) + top = '%.6f' % ((dev['row']*height) + devtl.scaleH) + left = '%.6f' % (((dev['start']-t0)*100)/tTotal) + width = '%.6f' % (((dev['end']-dev['start'])*100)/tTotal) + length = ' (%0.3f ms) ' % ((dev['end']-dev['start'])*1000) + devtl.html += devtl.html_device.format(dev['id'], + devname+length+phase+'_mode', left, top, '%.3f'%height, + width, devname, ' '+cls, '') + rowtop = devtl.phaseRowTop(0, phase, dev['row']) + height = '%.6f' % (devtl.rowH / 2) + top = '%.6f' % (rowtop + devtl.scaleH + (devtl.rowH / 2)) + if data.do_one_initcall: + if('ftrace' not in dev): + continue + cg = dev['ftrace'] + large, stats = cgOverview(cg, 0.001) + devstats[dev['id']]['fstat'] = stats + for l in large: + left = '%f' % (((l.time-t0)*100)/tTotal) + width = '%f' % (l.length*100/tTotal) + title = '%s (%0.3fms)' % (l.name, l.length * 1000.0) + devtl.html += html_srccall.format(l.name, left, + top, height, width, title, 'x%d'%num) + num += 1 + continue + if('ftraces' not in dev): + continue + for cg in dev['ftraces']: + left = '%f' % (((cg.start-t0)*100)/tTotal) + width = '%f' % ((cg.end-cg.start)*100/tTotal) + cglen = (cg.end - cg.start) * 1000.0 + title = '%s (%0.3fms)' % (cg.name, cglen) + cg.id = 'x%d' % num + devtl.html += html_srccall.format(cg.name, left, + top, height, width, title, dev['id']+cg.id) + num += 1 + + # draw the time scale, try to make the number of labels readable + devtl.createTimeScale(t0, tMax, tTotal, 'boot') + devtl.html += '</div>\n' + + # timeline is finished + devtl.html += '</div>\n</div>\n' + + # draw a legend which describes the phases by color + devtl.html += '<div class="legend">\n' + pdelta = 20.0 + pmargin = 36.0 + for phase in data.phases: + order = '%.2f' % ((data.dmesg[phase]['order'] * pdelta) + pmargin) + devtl.html += devtl.html_legend.format(order, \ + data.dmesg[phase]['color'], phase+'_mode', phase[0]) + devtl.html += '</div>\n' + + hf = open(sysvals.htmlfile, 'w') + + # add the css + extra = '\ + .c1 {background:rgba(209,0,0,0.4);}\n\ + .c2 {background:rgba(255,102,34,0.4);}\n\ + .c3 {background:rgba(255,218,33,0.4);}\n\ + .c4 {background:rgba(51,221,0,0.4);}\n\ + .c5 {background:rgba(17,51,204,0.4);}\n\ + .c6 {background:rgba(34,0,102,0.4);}\n\ + .c7 {background:rgba(51,0,68,0.4);}\n\ + .c8 {background:rgba(204,255,204,0.4);}\n\ + .c9 {background:rgba(169,208,245,0.4);}\n\ + .c10 {background:rgba(255,255,204,0.4);}\n\ + .vt {transform:rotate(-60deg);transform-origin:0 0;}\n\ + table.fstat {table-layout:fixed;padding:150px 15px 0 0;font-size:10px;column-width:30px;}\n\ + .fstat th {width:55px;}\n\ + .fstat td {text-align:left;width:35px;}\n\ + .srccall {position:absolute;font-size:10px;z-index:7;overflow:hidden;color:black;text-align:center;white-space:nowrap;border-radius:5px;border:1px solid black;background:linear-gradient(to bottom right,#CCC,#969696);}\n\ + .srccall:hover {color:white;font-weight:bold;border:1px solid white;}\n' + aslib.addCSS(hf, sysvals, 1, False, extra) + + # write the device timeline + hf.write(devtl.html) + + # add boot specific html + statinfo = 'var devstats = {\n' + for n in sorted(devstats): + statinfo += '\t"%s": [\n\t\t"%s",\n' % (n, devstats[n]['info']) + if 'fstat' in devstats[n]: + funcs = devstats[n]['fstat'] + for f in sorted(funcs, key=lambda k:(funcs[k], k), reverse=True): + if funcs[f][0] < 0.01 and len(funcs) > 10: + break + statinfo += '\t\t"%f|%s|%d",\n' % (funcs[f][0], f, funcs[f][1]) + statinfo += '\t],\n' + statinfo += '};\n' + html = \ + '<div id="devicedetailtitle"></div>\n'\ + '<div id="devicedetail" style="display:none;">\n'\ + '<div id="devicedetail0">\n' + for p in data.phases: + phase = data.dmesg[p] + html += devtl.html_phaselet.format(p+'_mode', '0', '100', phase['color']) + html += '</div>\n</div>\n'\ + '<script type="text/javascript">\n'+statinfo+\ + '</script>\n' + hf.write(html) + + # add the callgraph html + if(sysvals.usecallgraph): + aslib.addCallgraphs(sysvals, hf, data) + + # add the test log as a hidden div + if sysvals.testlog and sysvals.logmsg: + hf.write('<div id="testlog" style="display:none;">\n'+sysvals.logmsg+'</div>\n') + # add the dmesg log as a hidden div + if sysvals.dmesglog: + hf.write('<div id="dmesglog" style="display:none;">\n') + for line in data.dmesgtext: + line = line.replace('<', '<').replace('>', '>') + hf.write(line) + hf.write('</div>\n') + + # write the footer and close + aslib.addScriptCode(hf, [data]) + hf.write('</body>\n</html>\n') + hf.close() + return True + +# Function: updateCron +# Description: +# (restore=False) Set the tool to run automatically on reboot +# (restore=True) Restore the original crontab +def updateCron(restore=False): + if not restore: + sysvals.rootUser(True) + crondir = '/var/spool/cron/crontabs/' + if not os.path.exists(crondir): + crondir = '/var/spool/cron/' + if not os.path.exists(crondir): + doError('%s not found' % crondir) + cronfile = crondir+'root' + backfile = crondir+'root-analyze_boot-backup' + cmd = sysvals.getExec('crontab') + if not cmd: + doError('crontab not found') + # on restore: move the backup cron back into place + if restore: + if os.path.exists(backfile): + shutil.move(backfile, cronfile) + call([cmd, cronfile]) + return + # backup current cron and install new one with reboot + if os.path.exists(cronfile): + shutil.move(cronfile, backfile) + else: + fp = open(backfile, 'w') + fp.close() + res = -1 + try: + fp = open(backfile, 'r') + op = open(cronfile, 'w') + for line in fp: + if not sysvals.myCronJob(line): + op.write(line) + continue + fp.close() + op.write('@reboot python %s\n' % sysvals.cronjobCmdString()) + op.close() + res = call([cmd, cronfile]) + except Exception as e: + pprint('Exception: %s' % str(e)) + shutil.move(backfile, cronfile) + res = -1 + if res != 0: + doError('crontab failed') + +# Function: updateGrub +# Description: +# update grub.cfg for all kernels with our parameters +def updateGrub(restore=False): + # call update-grub on restore + if restore: + try: + call(sysvals.blexec, stderr=PIPE, stdout=PIPE, + env={'PATH': '.:/sbin:/usr/sbin:/usr/bin:/sbin:/bin'}) + except Exception as e: + pprint('Exception: %s\n' % str(e)) + return + # extract the option and create a grub config without it + sysvals.rootUser(True) + tgtopt = 'GRUB_CMDLINE_LINUX_DEFAULT' + cmdline = '' + grubfile = '/etc/default/grub' + tempfile = '/etc/default/grub.analyze_boot' + shutil.move(grubfile, tempfile) + res = -1 + try: + fp = open(tempfile, 'r') + op = open(grubfile, 'w') + cont = False + for line in fp: + line = line.strip() + if len(line) == 0 or line[0] == '#': + continue + opt = line.split('=')[0].strip() + if opt == tgtopt: + cmdline = line.split('=', 1)[1].strip('\\') + if line[-1] == '\\': + cont = True + elif cont: + cmdline += line.strip('\\') + if line[-1] != '\\': + cont = False + else: + op.write('%s\n' % line) + fp.close() + # if the target option value is in quotes, strip them + sp = '"' + val = cmdline.strip() + if val and (val[0] == '\'' or val[0] == '"'): + sp = val[0] + val = val.strip(sp) + cmdline = val + # append our cmd line options + if len(cmdline) > 0: + cmdline += ' ' + cmdline += sysvals.kernelParams() + # write out the updated target option + op.write('\n%s=%s%s%s\n' % (tgtopt, sp, cmdline, sp)) + op.close() + res = call(sysvals.blexec) + os.remove(grubfile) + except Exception as e: + pprint('Exception: %s' % str(e)) + res = -1 + # cleanup + shutil.move(tempfile, grubfile) + if res != 0: + doError('update grub failed') + +# Function: updateKernelParams +# Description: +# update boot conf for all kernels with our parameters +def updateKernelParams(restore=False): + # find the boot loader + sysvals.getBootLoader() + if sysvals.bootloader == 'grub': + updateGrub(restore) + +# Function: doError Description: +# generic error function for catastrphic failures +# Arguments: +# msg: the error message to print +# help: True if printHelp should be called after, False otherwise +def doError(msg, help=False): + if help == True: + printHelp() + pprint('ERROR: %s\n' % msg) + sysvals.outputResult({'error':msg}) + sys.exit() + +# Function: printHelp +# Description: +# print out the help text +def printHelp(): + pprint('\n%s v%s\n'\ + 'Usage: bootgraph <options> <command>\n'\ + '\n'\ + 'Description:\n'\ + ' This tool reads in a dmesg log of linux kernel boot and\n'\ + ' creates an html representation of the boot timeline up to\n'\ + ' the start of the init process.\n'\ + '\n'\ + ' If no specific command is given the tool reads the current dmesg\n'\ + ' and/or ftrace log and creates a timeline\n'\ + '\n'\ + ' Generates output files in subdirectory: boot-yymmdd-HHMMSS\n'\ + ' HTML output: <hostname>_boot.html\n'\ + ' raw dmesg output: <hostname>_boot_dmesg.txt\n'\ + ' raw ftrace output: <hostname>_boot_ftrace.txt\n'\ + '\n'\ + 'Options:\n'\ + ' -h Print this help text\n'\ + ' -v Print the current tool version\n'\ + ' -verbose Print extra information during execution and analysis\n'\ + ' -addlogs Add the dmesg log to the html output\n'\ + ' -result fn Export a results table to a text file for parsing.\n'\ + ' -o name Overrides the output subdirectory name when running a new test\n'\ + ' default: boot-{date}-{time}\n'\ + ' [advanced]\n'\ + ' -fstat Use ftrace to add function detail and statistics (default: disabled)\n'\ + ' -f/-callgraph Add callgraph detail, can be very large (default: disabled)\n'\ + ' -maxdepth N limit the callgraph data to N call levels (default: 2)\n'\ + ' -mincg ms Discard all callgraphs shorter than ms milliseconds (e.g. 0.001 for us)\n'\ + ' -timeprec N Number of significant digits in timestamps (0:S, 3:ms, [6:us])\n'\ + ' -expandcg pre-expand the callgraph data in the html output (default: disabled)\n'\ + ' -func list Limit ftrace to comma-delimited list of functions (default: do_one_initcall)\n'\ + ' -cgfilter S Filter the callgraph output in the timeline\n'\ + ' -cgskip file Callgraph functions to skip, off to disable (default: cgskip.txt)\n'\ + ' -bl name Use the following boot loader for kernel params (default: grub)\n'\ + ' -reboot Reboot the machine automatically and generate a new timeline\n'\ + ' -manual Show the steps to generate a new timeline manually (used with -reboot)\n'\ + '\n'\ + 'Other commands:\n'\ + ' -flistall Print all functions capable of being captured in ftrace\n'\ + ' -sysinfo Print out system info extracted from BIOS\n'\ + ' -which exec Print an executable path, should function even without PATH\n'\ + ' [redo]\n'\ + ' -dmesg file Create HTML output using dmesg input (used with -ftrace)\n'\ + ' -ftrace file Create HTML output using ftrace input (used with -dmesg)\n'\ + '' % (sysvals.title, sysvals.version)) + return True + +# ----------------- MAIN -------------------- +# exec start (skipped if script is loaded as library) +if __name__ == '__main__': + # loop through the command line arguments + cmd = '' + testrun = True + switchoff = ['disable', 'off', 'false', '0'] + simplecmds = ['-sysinfo', '-kpupdate', '-flistall', '-checkbl'] + cgskip = '' + if '-f' in sys.argv: + cgskip = sysvals.configFile('cgskip.txt') + args = iter(sys.argv[1:]) + mdset = False + for arg in args: + if(arg == '-h'): + printHelp() + sys.exit() + elif(arg == '-v'): + pprint("Version %s" % sysvals.version) + sys.exit() + elif(arg == '-verbose'): + sysvals.verbose = True + elif(arg in simplecmds): + cmd = arg[1:] + elif(arg == '-fstat'): + sysvals.useftrace = True + elif(arg == '-callgraph' or arg == '-f'): + sysvals.useftrace = True + sysvals.usecallgraph = True + elif(arg == '-cgdump'): + sysvals.cgdump = True + elif(arg == '-mincg'): + sysvals.mincglen = aslib.getArgFloat('-mincg', args, 0.0, 10000.0) + elif(arg == '-cgfilter'): + try: + val = next(args) + except: + doError('No callgraph functions supplied', True) + sysvals.setCallgraphFilter(val) + elif(arg == '-cgskip'): + try: + val = next(args) + except: + doError('No file supplied', True) + if val.lower() in switchoff: + cgskip = '' + else: + cgskip = sysvals.configFile(val) + if(not cgskip): + doError('%s does not exist' % cgskip) + elif(arg == '-bl'): + try: + val = next(args) + except: + doError('No boot loader name supplied', True) + if val.lower() not in ['grub']: + doError('Unknown boot loader: %s' % val, True) + sysvals.bootloader = val.lower() + elif(arg == '-timeprec'): + sysvals.setPrecision(aslib.getArgInt('-timeprec', args, 0, 6)) + elif(arg == '-maxdepth'): + mdset = True + sysvals.max_graph_depth = aslib.getArgInt('-maxdepth', args, 0, 1000) + elif(arg == '-func'): + try: + val = next(args) + except: + doError('No filter functions supplied', True) + sysvals.useftrace = True + sysvals.usecallgraph = True + sysvals.rootCheck(True) + sysvals.setGraphFilter(val) + elif(arg == '-ftrace'): + try: + val = next(args) + except: + doError('No ftrace file supplied', True) + if(os.path.exists(val) == False): + doError('%s does not exist' % val) + testrun = False + sysvals.ftracefile = val + elif(arg == '-addlogs'): + sysvals.dmesglog = True + elif(arg == '-expandcg'): + sysvals.cgexp = True + elif(arg == '-dmesg'): + try: + val = next(args) + except: + doError('No dmesg file supplied', True) + if(os.path.exists(val) == False): + doError('%s does not exist' % val) + testrun = False + sysvals.dmesgfile = val + elif(arg == '-o'): + try: + val = next(args) + except: + doError('No subdirectory name supplied', True) + sysvals.testdir = sysvals.setOutputFolder(val) + elif(arg == '-result'): + try: + val = next(args) + except: + doError('No result file supplied', True) + sysvals.result = val + elif(arg == '-reboot'): + sysvals.reboot = True + elif(arg == '-manual'): + sysvals.reboot = True + sysvals.manual = True + # remaining options are only for cron job use + elif(arg == '-cronjob'): + sysvals.iscronjob = True + elif(arg == '-which'): + try: + val = next(args) + except: + doError('No executable supplied', True) + out = sysvals.getExec(val) + if not out: + print('%s not found' % val) + sys.exit(1) + print(out) + sys.exit(0) + else: + doError('Invalid argument: '+arg, True) + + # compatibility errors and access checks + if(sysvals.iscronjob and (sysvals.reboot or \ + sysvals.dmesgfile or sysvals.ftracefile or cmd)): + doError('-cronjob is meant for batch purposes only') + if(sysvals.reboot and (sysvals.dmesgfile or sysvals.ftracefile)): + doError('-reboot and -dmesg/-ftrace are incompatible') + if cmd or sysvals.reboot or sysvals.iscronjob or testrun: + sysvals.rootCheck(True) + if (testrun and sysvals.useftrace) or cmd == 'flistall': + if not sysvals.verifyFtrace(): + doError('Ftrace is not properly enabled') + + # run utility commands + sysvals.cpuInfo() + if cmd != '': + if cmd == 'kpupdate': + updateKernelParams() + elif cmd == 'flistall': + for f in sysvals.getBootFtraceFilterFunctions(): + print(f) + elif cmd == 'checkbl': + sysvals.getBootLoader() + pprint('Boot Loader: %s\n%s' % (sysvals.bootloader, sysvals.blexec)) + elif(cmd == 'sysinfo'): + sysvals.printSystemInfo(True) + sys.exit() + + # reboot: update grub, setup a cronjob, and reboot + if sysvals.reboot: + if (sysvals.useftrace or sysvals.usecallgraph) and \ + not sysvals.checkFtraceKernelVersion(): + doError('Ftrace functionality requires kernel v4.10 or newer') + if not sysvals.manual: + updateKernelParams() + updateCron() + call('reboot') + else: + sysvals.manualRebootRequired() + sys.exit() + + if sysvals.usecallgraph and cgskip: + sysvals.vprint('Using cgskip file: %s' % cgskip) + sysvals.setCallgraphBlacklist(cgskip) + + # cronjob: remove the cronjob, grub changes, and disable ftrace + if sysvals.iscronjob: + updateCron(True) + updateKernelParams(True) + try: + sysvals.fsetVal('0', 'tracing_on') + except: + pass + + # testrun: generate copies of the logs + if testrun: + retrieveLogs() + else: + sysvals.setOutputFile() + + # process the log data + if sysvals.dmesgfile: + if not mdset: + sysvals.max_graph_depth = 0 + data = parseKernelLog() + if(not data.valid): + doError('No initcall data found in %s' % sysvals.dmesgfile) + if sysvals.useftrace and sysvals.ftracefile: + parseTraceLog(data) + if sysvals.cgdump: + data.debugPrint() + sys.exit() + else: + doError('dmesg file required') + + sysvals.vprint('Creating the html timeline (%s)...' % sysvals.htmlfile) + sysvals.vprint('Command:\n %s' % sysvals.cmdline) + sysvals.vprint('Kernel parameters:\n %s' % sysvals.kparams) + data.printDetails() + createBootGraph(data) + + # if running as root, change output dir owner to sudo_user + if testrun and os.path.isdir(sysvals.testdir) and \ + os.getuid() == 0 and 'SUDO_USER' in os.environ: + cmd = 'chown -R {0}:{0} {1} > /dev/null 2>&1' + call(cmd.format(os.environ['SUDO_USER'], sysvals.testdir), shell=True) + + sysvals.stamp['boot'] = (data.tUserMode - data.start) * 1000 + sysvals.stamp['lastinit'] = data.end * 1000 + sysvals.outputResult(sysvals.stamp) diff --git a/tools/power/pm-graph/config/cgskip.txt b/tools/power/pm-graph/config/cgskip.txt new file mode 100644 index 000000000..9ff88e7e2 --- /dev/null +++ b/tools/power/pm-graph/config/cgskip.txt @@ -0,0 +1,66 @@ +# ----------------------------------------------- +# CallGraph function skip list +# +# This file contains a list of functions which are +# meant to be skipped in the callgraph trace. It reduces +# the callgraph html file size by treating these functions +# as leaves with no child calls. It can be editted by +# adding or removing function symbol names. +# +# The sleepgraph tool automatically pulls this file in when +# it is found in the config folder. It can be ignored if +# the tool is called with "-cgskip off". +# ----------------------------------------------- + +# low level scheduling and timing +up +down_timeout +mutex_lock +down_read +complete_all +schedule_timeout +wake_up_process +msleep +__udelay +ktime_get + +# console calls +printk +dev_printk +__dev_printk +console_unlock + +# memory handling +__kmalloc +__kmalloc_track_caller +kmem_cache_alloc +kmem_cache_alloc_trace +kmem_cache_free +kstrdup +kstrdup_const +kmalloc_slab +new_slab +__slab_alloc +__slab_free +raw_pci_read +pci_read +alloc_pages_current + +# debugfs and sysfs setup +debugfs_remove_recursive +debugfs_create_dir +debugfs_create_files +debugfs_create_dir +debugfs_get_inode +sysfs_add_file_mode_ns +sysfs_add_file +sysfs_create_dir_ns +sysfs_create_link +sysfs_create_group +sysfs_create_groups +sysfs_create_bin_file +dpm_sysfs_add +sysfs_create_file_ns +sysfs_merge_group +sysfs_add_link_to_group +sysfs_create_link_sd diff --git a/tools/power/pm-graph/config/custom-timeline-functions.cfg b/tools/power/pm-graph/config/custom-timeline-functions.cfg new file mode 100644 index 000000000..962e57686 --- /dev/null +++ b/tools/power/pm-graph/config/custom-timeline-functions.cfg @@ -0,0 +1,205 @@ +# +# This is the configuration file for sleepgraph. It contains +# all the tool arguments so that they don't have to be given on the +# command line. It also includes advanced settings for functions +# and kprobes. It is run like this +# +# sudo ./sleepgraph.py -config thisfile.txt +# + +[Settings] + +# Verbosity +# print verbose messages (default: false) +verbose: false + +# Suspend Mode +# e.g. standby, mem, freeze, disk (default: mem) +mode: mem + +# Automatic Wakeup +# Use rtcwake to autoresume after X seconds, or off to disable (default: 15) +rtcwake: 15 + +# Add Logs +# add the dmesg and ftrace log to the html output (default: false) +addlogs: false + +# Display function calls +# graph source functions in the timeline (default: false) +dev: true + +# Callgraph +# gather detailed ftrace callgraph data on all timeline events (default: false) +callgraph: false + +# Back to Back Suspend/Resume +# Run two suspend/resumes back to back (default: false) +x2: false + +# Back to Back Suspend Delay +# Time delay between the two test runs in ms (default: 0 ms) +x2delay: 0 + +# Minimum Device Length +# graph only devices longer than min in the timeline (default: 0.001 ms) +mindev: 1 + +# Minimum Callgraph Length +# provide callgraph data for blocks longer than min (default: 0.001 ms) +mincg: 1 + +# Suspend/Resume Gap +# insert a small visible gap between suspend and resume on the timeline (default: false) +srgap: false + +# Output Directory Format +# output folder for html, ftrace, and dmesg. Use {date} and {time} for current values +output-dir: suspend-{hostname}-{date}-{time}-custom + +# Override default timeline entries +# Do not use the internal default functions for timeline entries (default: false) +# Set this to true if you intend to only use the ones defined in this config +override-timeline-functions: true + +# Override default dev timeline entries +# Do not use the internal default functions for dev timeline entries (default: false) +# Set this to true if you intend to only use the ones defined in this config +override-dev-timeline-functions: true + +[timeline_functions_x86_64] +# +# Function calls to display in the timeline alongside device callbacks. +# The tool has an internal set of these functions which should cover the +# whole of kernel execution, but you can append or override here. +# +# This is a list of kprobes which use both symbol data and function arg data. +# The function calls are displayed on the timeline alongside the device blocks. +# The args are pulled directly from the stack using this architecture's registers +# and stack formatting. Three pieces of info are required. The function name, +# a format string, and an argument list +# +# Entry format: +# +# function: format{fn_arg1}_{fn_arg2} fn_arg1 fn_arg2 ... [color=purple] +# +# Required Arguments: +# +# function: The symbol name for the function you want probed, this is the +# minimum required for an entry, it will show up as the function +# name with no arguments. +# +# example: _cpu_up: +# +# Optional Arguments: +# +# format: The format to display the data on the timeline in. Use braces to +# enclose the arg names. +# +# example: CPU_ON[{cpu}] +# +# color: The color of the entry block in the timeline. The default color is +# transparent, so the entry shares the phase color. The color is an +# html color string, either a word, or an RGB. +# +# example: [color=#CC00CC] +# +# arglist: A list of arguments from registers/stack addresses. See URL: +# https://www.kernel.org/doc/Documentation/trace/kprobetrace.txt +# +# example: cpu=%di:s32 +# +# Example: Display cpu resume in the timeline +# +# _cpu_up: CPU_ON[{cpu}] cpu=%di:s32 [color=orange] +# +_cpu_down: CPU_OFF[{cpu}] cpu=%di:s32 +_cpu_up: CPU_ON[{cpu}] cpu=%di:s32 +sys_sync: +pm_prepare_console: +pm_notifier_call_chain: +freeze_processes: +freeze_kernel_threads: +pm_restrict_gfp_mask: +acpi_suspend_begin: +suspend_console: +acpi_pm_prepare: +syscore_suspend: +arch_thaw_secondary_cpus_end: +syscore_resume: +acpi_pm_finish: +resume_console: +acpi_pm_end: +pm_restore_gfp_mask: +thaw_processes: +pm_restore_console: + +[dev_timeline_functions_x86_64] +# +# Dev mode function calls to display inside timeline entries +# +# This is a list of kprobes which use both symbol data and function arg data. +# The function calls are displayed on the timeline alongside the device blocks. +# The args are pulled directly from the stack using this architecture's registers +# and stack formatting. Three pieces of info are required. The function name, +# a format string, and an argument list +# +# Entry format: +# +# function: format{fn_arg1}_{fn_arg2} fn_arg1 fn_arg2 ... [color=purple] +# +# Required Arguments: +# +# function: The symbol name for the function you want probed, this is the +# minimum required for an entry, it will show up as the function +# name with no arguments. +# +# example: ata_eh_recover: +# +# Optional Arguments: +# +# format: The format to display the data on the timeline in. Use braces to +# enclose the arg names. +# +# example: ata{port}_port_reset +# +# color: The color of the entry block in the timeline. The default color is +# transparent, so the entry shares the phase color. The color is an +# html color string, either a word, or an RGB. +# +# example: [color=#CC00CC] +# +# arglist: A list of arguments from registers/stack addresses. See URL: +# https://www.kernel.org/doc/Documentation/trace/kprobetrace.txt +# +# example: port=+36(%di):s32 +# +# Example: Display ATA port reset as ataN_port_reset in the timeline +# +# ata_eh_recover: ata{port}_port_reset port=+36(%di):s32 +# +msleep: msleep time=%di:s32 +schedule_timeout_uninterruptible: schedule_timeout_uninterruptible timeout=%di:s32 +schedule_timeout: schedule_timeout timeout=%di:s32 +usleep_range: usleep_range min=%di:s32 max=%si:s32 +__const_udelay: udelay loops=%di:s32 +__mutex_lock_slowpath: mutex_lock_slowpath +ata_eh_recover: ata_eh_recover port=+36(%di):s32 +acpi_os_stall: +acpi_resume_power_resources: +acpi_ps_parse_aml: +ext4_sync_fs: +i915_gem_resume: +i915_restore_state: +intel_opregion_setup: +g4x_pre_enable_dp: +vlv_pre_enable_dp: +chv_pre_enable_dp: +g4x_enable_dp: +vlv_enable_dp: +intel_hpd_init: +intel_opregion_register: +intel_dp_detect: +intel_hdmi_detect: +intel_opregion_init: +intel_fbdev_set_suspend: diff --git a/tools/power/pm-graph/config/example.cfg b/tools/power/pm-graph/config/example.cfg new file mode 100644 index 000000000..1ef3eb938 --- /dev/null +++ b/tools/power/pm-graph/config/example.cfg @@ -0,0 +1,159 @@ +# +# Generic S3 (Suspend to Mem) test +# +# This is the configuration file for sleepgraph. It contains +# all the tool arguments so that they don't have to be given on the +# command line. It also includes advanced settings for functions +# and kprobes. It is run like this +# +# sudo ./sleepgraph.py -config config/example.cfg +# + +[Settings] + +# ---- General Options ---- + +# Verbosity +# print verbose messages (default: false) +verbose: false + +# Suspend Mode +# e.g. standby, mem, freeze, disk (default: mem) +mode: mem + +# Output Directory Format +# output folder for html, ftrace, and dmesg. Use {date} and {time} for current values +output-dir: suspend-{hostname}-{date}-{time} + +# Automatic Wakeup +# Use rtcwake to autoresume after X seconds, or off to disable (default: 15) +rtcwake: 15 + +# Add Logs +# add the dmesg and ftrace log to the html output (default: false) +addlogs: true + +# Suspend/Resume Gap +# insert a small visible gap between suspend and resume on the timeline (default: false) +srgap: false + +# Skip HTML generation +# Only capture the logs, don't generate the html timeline (default: false) +skiphtml: false + +# Sync filesystem before suspend +# run sync before the test, minimizes sys_sync call time (default: false) +sync: true + +# Runtime suspend enable/disable +# Enable/disable runtime suspend for all devices, restore all after test (default: no-action) +# rs: disable + +# Turn display on/off for test +# Switch the display on/off for the test using xset (default: no-action) +# display: on + +# Print results to text file +# Print the status of the test run in the given file (default: no-action) +result: result.txt + +# Gzip the log files to save space +# Gzip the generated log files, and read gzipped log files (default: false) +gzip: true + +# ---- Advanced Options ---- + +# Command to execute in lieu of suspend (default: "") +# command: echo mem > /sys/power/state + +# Display user processes +# graph user processes and cpu usage in the timeline (default: false) +proc: false + +# Display function calls +# graph source functions in the timeline (default: false) +dev: false + +# Multiple test runs +# Run N tests D seconds apart, generates separate outputs with a summary (default: false) +# multi: 3 5 + +# Back to Back Suspend/Resume +# Run two suspend/resumes back to back and display in the same timeline (default: false) +x2: false + +# Back to Back Suspend Delay +# Time delay between the two test runs in ms (default: 0 ms) +x2delay: 0 + +# Pre Suspend Delay +# Include an N ms delay before (1st) suspend (default: 0 ms) +predelay: 0 + +# Post Resume Delay +# Include an N ms delay after (last) resume (default: 0 ms) +postdelay: 0 + +# Minimum Device Length +# graph only devices longer than min in the timeline (default: 0.001 ms) +mindev: 0.001 + +# Call Loop Max Gap (dev mode only) +# merge loops of the same call if each is less than maxgap apart (def: 100us) +callloop-maxgap: 0.0001 + +# Call Loop Max Length (dev mode only) +# merge loops of the same call if each is less than maxlen in length (def: 5ms) +callloop-maxlen: 0.005 + +# Override default timeline entries: +# Do not use the internal default functions for timeline entries (def: false) +# Set this to true if you intend to only use the ones defined in the config +override-timeline-functions: true + +# Override default dev timeline entries: +# Do not use the internal default functions for dev timeline entries (def: false) +# Set this to true if you intend to only use the ones defined in the config +override-dev-timeline-functions: true + +# ---- Debug Options ---- + +# Callgraph +# gather detailed ftrace callgraph data on all timeline events (default: false) +callgraph: false + +# Max graph depth +# limit the callgraph trace to this depth (default: 0 = all) +maxdepth: 2 + +# Callgraph phase filter +# Only enable callgraphs for one phase, i.e. resume_noirq (default: all) +cgphase: suspend + +# Callgraph x2 test filter +# Only enable callgraphs test 0 or 1 when using -x2 (default: 1) +cgtest: 0 + +# Expand Callgraph +# pre-expand the callgraph data in the html output (default: disabled) +expandcg: false + +# Minimum Callgraph Length +# provide callgraph data for blocks longer than min (default: 0.001 ms) +mincg: 1 + +# Timestamp Precision +# Number of significant digits in timestamps (0:S, [3:ms], 6:us) +timeprec: 6 + +# Device Filter +# show only devices whose name/driver includes one of these strings +# devicefilter: _cpu_up,_cpu_down,i915,usb + +# Add kprobe functions to the timeline +# Add functions to the timeline from a text file (default: no-action) +# fadd: file.txt + +# Ftrace buffer size +# Set trace buffer size to N kilo-bytes (default: all of free memory up to 3GB) +# bufsize: 1000 diff --git a/tools/power/pm-graph/config/freeze-callgraph.cfg b/tools/power/pm-graph/config/freeze-callgraph.cfg new file mode 100644 index 000000000..f692821c4 --- /dev/null +++ b/tools/power/pm-graph/config/freeze-callgraph.cfg @@ -0,0 +1,94 @@ +# +# Full Callgraph for S2 (Freeze) test +# +# This is the configuration file for sleepgraph. It contains +# all the tool arguments so that they don't have to be given on the +# command line. It also includes advanced settings for functions +# and kprobes. It is run like this +# +# sudo ./sleepgraph.py -config config/freeze-callgraph.cfg +# +# NOTE: the output of this test is very large (> 30MB) + +[Settings] + +# ---- General Options ---- + +# Verbosity +# print verbose messages (default: false) +verbose: false + +# Suspend Mode +# e.g. standby, mem, freeze, disk (default: mem) +mode: freeze + +# Output Directory Format +# output folder for html, ftrace, and dmesg. Use {date} and {time} for current values +output-dir: freeze-{hostname}-{date}-{time}-cg + +# Automatic Wakeup +# Use rtcwake to autoresume after X seconds, or off to disable (default: 15) +rtcwake: 15 + +# Add Logs +# add the dmesg and ftrace log to the html output (default: false) +addlogs: false + +# Suspend/Resume Gap +# insert a small visible gap between suspend and resume on the timeline (default: false) +srgap: false + +# ---- Advanced Options ---- + +# Command to execute in lieu of freeze (default: "") +# command: echo freeze > /sys/power/state + +# Display user processes +# graph user processes and cpu usage in the timeline (default: false) +proc: false + +# Display function calls +# graph source functions in the timeline (default: false) +dev: false + +# Back to Back Suspend/Resume +# Run two suspend/resumes back to back (default: false) +x2: false + +# Back to Back Suspend Delay +# Time delay between the two test runs in ms (default: 0 ms) +x2delay: 0 + +# Pre Suspend Delay +# Include an N ms delay before (1st) suspend (default: 0 ms) +predelay: 0 + +# Post Resume Delay +# Include an N ms delay after (last) resume (default: 0 ms) +postdelay: 0 + +# Minimum Device Length +# graph only devices longer than min in the timeline (default: 0.001 ms) +mindev: 1 + +# ---- Debug Options ---- + +# Callgraph +# gather detailed ftrace callgraph data on all timeline events (default: false) +callgraph: true + +# Expand Callgraph +# pre-expand the callgraph data in the html output (default: disabled) +expandcg: false + +# Minimum Callgraph Length +# provide callgraph data for blocks longer than min (default: 0.001 ms) +mincg: 1 + +# Timestamp Precision +# Number of significant digits in timestamps (0:S, [3:ms], 6:us) +timeprec: 6 + +# Device Filter +# show only devs whose name/driver includes one of these strings +# devicefilter: _cpu_up,_cpu_down,i915,usb diff --git a/tools/power/pm-graph/config/freeze-dev.cfg b/tools/power/pm-graph/config/freeze-dev.cfg new file mode 100644 index 000000000..c4ad5cea3 --- /dev/null +++ b/tools/power/pm-graph/config/freeze-dev.cfg @@ -0,0 +1,93 @@ +# +# Dev S2 (Freeze) test - includes src calls / kernel threads +# +# This is the configuration file for sleepgraph. It contains +# all the tool arguments so that they don't have to be given on the +# command line. It also includes advanced settings for functions +# and kprobes. It is run like this +# +# sudo ./sleepgraph.py -config config/freeze-dev.cfg +# + +[Settings] + +# ---- General Options ---- + +# Verbosity +# print verbose messages (default: false) +verbose: false + +# Suspend Mode +# e.g. standby, mem, freeze, disk (default: mem) +mode: freeze + +# Output Directory Format +# output folder for html, ftrace, and dmesg. Use {date} and {time} for current values +output-dir: freeze-{hostname}-{date}-{time}-dev + +# Automatic Wakeup +# Use rtcwake to autoresume after X seconds, or off to disable (default: 15) +rtcwake: 15 + +# Add Logs +# add the dmesg and ftrace log to the html output (default: false) +addlogs: false + +# Suspend/Resume Gap +# insert a small visible gap between suspend and resume on the timeline (default: false) +srgap: false + +# ---- Advanced Options ---- + +# Command to execute in lieu of freeze (default: "") +# command: echo freeze > /sys/power/state + +# Display user processes +# graph user processes and cpu usage in the timeline (default: false) +proc: false + +# Display function calls +# graph source functions in the timeline (default: false) +dev: true + +# Back to Back Suspend/Resume +# Run two suspend/resumes back to back (default: false) +x2: false + +# Back to Back Suspend Delay +# Time delay between the two test runs in ms (default: 0 ms) +x2delay: 0 + +# Pre Suspend Delay +# Include an N ms delay before (1st) suspend (default: 0 ms) +predelay: 0 + +# Post Resume Delay +# Include an N ms delay after (last) resume (default: 0 ms) +postdelay: 0 + +# Minimum Device Length +# graph only devices longer than min in the timeline (default: 0.001 ms) +mindev: 1 + +# ---- Debug Options ---- + +# Callgraph +# gather detailed ftrace callgraph data on all timeline events (default: false) +callgraph: false + +# Expand Callgraph +# pre-expand the callgraph data in the html output (default: disabled) +expandcg: false + +# Minimum Callgraph Length +# provide callgraph data for blocks longer than min (default: 0.001 ms) +mincg: 1 + +# Timestamp Precision +# Number of significant digits in timestamps (0:S, [3:ms], 6:us) +timeprec: 3 + +# Device Filter +# show only devs whose name/driver includes one of these strings +# devicefilter: _cpu_up,_cpu_down,i915,usb diff --git a/tools/power/pm-graph/config/freeze.cfg b/tools/power/pm-graph/config/freeze.cfg new file mode 100644 index 000000000..0b70e0b74 --- /dev/null +++ b/tools/power/pm-graph/config/freeze.cfg @@ -0,0 +1,93 @@ +# +# Generic S2 (Freeze) test +# +# This is the configuration file for sleepgraph. It contains +# all the tool arguments so that they don't have to be given on the +# command line. It also includes advanced settings for functions +# and kprobes. It is run like this +# +# sudo ./sleepgraph.py -config config/freeze.cfg +# + +[Settings] + +# ---- General Options ---- + +# Verbosity +# print verbose messages (default: false) +verbose: false + +# Suspend Mode +# e.g. standby, mem, freeze, disk (default: mem) +mode: freeze + +# Output Directory Format +# output folder for html, ftrace, and dmesg. Use {date} and {time} for current values +output-dir: freeze-{hostname}-{date}-{time} + +# Automatic Wakeup +# Use rtcwake to autoresume after X seconds, or off to disable (default: 15) +rtcwake: 15 + +# Add Logs +# add the dmesg and ftrace log to the html output (default: false) +addlogs: false + +# Suspend/Resume Gap +# insert a small visible gap between suspend and resume on the timeline (default: false) +srgap: false + +# ---- Advanced Options ---- + +# Command to execute in lieu of freeze (default: "") +# command: echo freeze > /sys/power/state + +# Display user processes +# graph user processes and cpu usage in the timeline (default: false) +proc: false + +# Display function calls +# graph source functions in the timeline (default: false) +dev: false + +# Back to Back Suspend/Resume +# Run two suspend/resumes back to back (default: false) +x2: false + +# Back to Back Suspend Delay +# Time delay between the two test runs in ms (default: 0 ms) +x2delay: 0 + +# Pre Suspend Delay +# Include an N ms delay before (1st) suspend (default: 0 ms) +predelay: 0 + +# Post Resume Delay +# Include an N ms delay after (last) resume (default: 0 ms) +postdelay: 0 + +# Minimum Device Length +# graph only devices longer than min in the timeline (default: 0.001 ms) +mindev: 0.001 + +# ---- Debug Options ---- + +# Callgraph +# gather detailed ftrace callgraph data on all timeline events (default: false) +callgraph: false + +# Expand Callgraph +# pre-expand the callgraph data in the html output (default: disabled) +expandcg: false + +# Minimum Callgraph Length +# provide callgraph data for blocks longer than min (default: 0.001 ms) +mincg: 1 + +# Timestamp Precision +# Number of significant digits in timestamps (0:S, [3:ms], 6:us) +timeprec: 3 + +# Device Filter +# show only devs whose name/driver includes one of these strings +# devicefilter: _cpu_up,_cpu_down,i915,usb diff --git a/tools/power/pm-graph/config/standby-callgraph.cfg b/tools/power/pm-graph/config/standby-callgraph.cfg new file mode 100644 index 000000000..f52a6b9d5 --- /dev/null +++ b/tools/power/pm-graph/config/standby-callgraph.cfg @@ -0,0 +1,94 @@ +# +# Full Callgraph for S1 (Standby) test +# +# This is the configuration file for sleepgraph. It contains +# all the tool arguments so that they don't have to be given on the +# command line. It also includes advanced settings for functions +# and kprobes. It is run like this +# +# sudo ./sleepgraph.py -config config/standby-callgraph.cfg +# +# NOTE: the output of this test is very large (> 30MB) + +[Settings] + +# ---- General Options ---- + +# Verbosity +# print verbose messages (default: false) +verbose: false + +# Suspend Mode +# e.g. standby, mem, freeze, disk (default: mem) +mode: standby + +# Output Directory Format +# output folder for html, ftrace, and dmesg. Use {date} and {time} for current values +output-dir: standby-{hostname}-{date}-{time}-cg + +# Automatic Wakeup +# Use rtcwake to autoresume after X seconds, or off to disable (default: 15) +rtcwake: 15 + +# Add Logs +# add the dmesg and ftrace log to the html output (default: false) +addlogs: false + +# Suspend/Resume Gap +# insert a small visible gap between suspend and resume on the timeline (default: false) +srgap: false + +# ---- Advanced Options ---- + +# Command to execute in lieu of standby (default: "") +# command: echo standby > /sys/power/state + +# Display user processes +# graph user processes and cpu usage in the timeline (default: false) +proc: false + +# Display function calls +# graph source functions in the timeline (default: false) +dev: false + +# Back to Back Suspend/Resume +# Run two suspend/resumes back to back (default: false) +x2: false + +# Back to Back Suspend Delay +# Time delay between the two test runs in ms (default: 0 ms) +x2delay: 0 + +# Pre Suspend Delay +# Include an N ms delay before (1st) suspend (default: 0 ms) +predelay: 0 + +# Post Resume Delay +# Include an N ms delay after (last) resume (default: 0 ms) +postdelay: 0 + +# Minimum Device Length +# graph only devices longer than min in the timeline (default: 0.001 ms) +mindev: 1 + +# ---- Debug Options ---- + +# Callgraph +# gather detailed ftrace callgraph data on all timeline events (default: false) +callgraph: true + +# Expand Callgraph +# pre-expand the callgraph data in the html output (default: disabled) +expandcg: false + +# Minimum Callgraph Length +# provide callgraph data for blocks longer than min (default: 0.001 ms) +mincg: 1 + +# Timestamp Precision +# Number of significant digits in timestamps (0:S, [3:ms], 6:us) +timeprec: 6 + +# Device Filter +# show only devs whose name/driver includes one of these strings +# devicefilter: _cpu_up,_cpu_down,i915,usb diff --git a/tools/power/pm-graph/config/standby-dev.cfg b/tools/power/pm-graph/config/standby-dev.cfg new file mode 100644 index 000000000..a5498ece3 --- /dev/null +++ b/tools/power/pm-graph/config/standby-dev.cfg @@ -0,0 +1,93 @@ +# +# Dev S1 (Standby) test - includes src calls / kernel threads +# +# This is the configuration file for sleepgraph. It contains +# all the tool arguments so that they don't have to be given on the +# command line. It also includes advanced settings for functions +# and kprobes. It is run like this +# +# sudo ./sleepgraph.py -config config/standby-dev.cfg +# + +[Settings] + +# ---- General Options ---- + +# Verbosity +# print verbose messages (default: false) +verbose: false + +# Suspend Mode +# e.g. standby, mem, freeze, disk (default: mem) +mode: standby + +# Output Directory Format +# output folder for html, ftrace, and dmesg. Use {date} and {time} for current values +output-dir: standby-{hostname}-{date}-{time}-dev + +# Automatic Wakeup +# Use rtcwake to autoresume after X seconds, or off to disable (default: 15) +rtcwake: 15 + +# Add Logs +# add the dmesg and ftrace log to the html output (default: false) +addlogs: false + +# Suspend/Resume Gap +# insert a small visible gap between suspend and resume on the timeline (default: false) +srgap: false + +# ---- Advanced Options ---- + +# Command to execute in lieu of standby (default: "") +# command: echo standby > /sys/power/state + +# Display user processes +# graph user processes and cpu usage in the timeline (default: false) +proc: false + +# Display function calls +# graph source functions in the timeline (default: false) +dev: true + +# Back to Back Suspend/Resume +# Run two suspend/resumes back to back (default: false) +x2: false + +# Back to Back Suspend Delay +# Time delay between the two test runs in ms (default: 0 ms) +x2delay: 0 + +# Pre Suspend Delay +# Include an N ms delay before (1st) suspend (default: 0 ms) +predelay: 0 + +# Post Resume Delay +# Include an N ms delay after (last) resume (default: 0 ms) +postdelay: 0 + +# Minimum Device Length +# graph only devices longer than min in the timeline (default: 0.001 ms) +mindev: 1 + +# ---- Debug Options ---- + +# Callgraph +# gather detailed ftrace callgraph data on all timeline events (default: false) +callgraph: false + +# Expand Callgraph +# pre-expand the callgraph data in the html output (default: disabled) +expandcg: false + +# Minimum Callgraph Length +# provide callgraph data for blocks longer than min (default: 0.001 ms) +mincg: 1 + +# Timestamp Precision +# Number of significant digits in timestamps (0:S, [3:ms], 6:us) +timeprec: 3 + +# Device Filter +# show only devs whose name/driver includes one of these strings +# devicefilter: _cpu_up,_cpu_down,i915,usb diff --git a/tools/power/pm-graph/config/standby.cfg b/tools/power/pm-graph/config/standby.cfg new file mode 100644 index 000000000..f0dd264df --- /dev/null +++ b/tools/power/pm-graph/config/standby.cfg @@ -0,0 +1,93 @@ +# +# Generic S1 (Standby) test +# +# This is the configuration file for sleepgraph. It contains +# all the tool arguments so that they don't have to be given on the +# command line. It also includes advanced settings for functions +# and kprobes. It is run like this +# +# sudo ./sleepgraph.py -config config/standby.cfg +# + +[Settings] + +# ---- General Options ---- + +# Verbosity +# print verbose messages (default: false) +verbose: false + +# Suspend Mode +# e.g. standby, mem, freeze, disk (default: mem) +mode: standby + +# Output Directory Format +# output folder for html, ftrace, and dmesg. Use {date} and {time} for current values +output-dir: standby-{hostname}-{date}-{time} + +# Automatic Wakeup +# Use rtcwake to autoresume after X seconds, or off to disable (default: 15) +rtcwake: 15 + +# Add Logs +# add the dmesg and ftrace log to the html output (default: false) +addlogs: false + +# Suspend/Resume Gap +# insert a small visible gap between suspend and resume on the timeline (default: false) +srgap: false + +# ---- Advanced Options ---- + +# Command to execute in lieu of standby (default: "") +# command: echo standby > /sys/power/state + +# Display user processes +# graph user processes and cpu usage in the timeline (default: false) +proc: false + +# Display function calls +# graph source functions in the timeline (default: false) +dev: false + +# Back to Back Suspend/Resume +# Run two suspend/resumes back to back (default: false) +x2: false + +# Back to Back Suspend Delay +# Time delay between the two test runs in ms (default: 0 ms) +x2delay: 0 + +# Pre Suspend Delay +# Include an N ms delay before (1st) suspend (default: 0 ms) +predelay: 0 + +# Post Resume Delay +# Include an N ms delay after (last) resume (default: 0 ms) +postdelay: 0 + +# Minimum Device Length +# graph only devices longer than min in the timeline (default: 0.001 ms) +mindev: 0.001 + +# ---- Debug Options ---- + +# Callgraph +# gather detailed ftrace callgraph data on all timeline events (default: false) +callgraph: false + +# Expand Callgraph +# pre-expand the callgraph data in the html output (default: disabled) +expandcg: false + +# Minimum Callgraph Length +# provide callgraph data for blocks longer than min (default: 0.001 ms) +mincg: 1 + +# Timestamp Precision +# Number of significant digits in timestamps (0:S, [3:ms], 6:us) +timeprec: 3 + +# Device Filter +# show only devs whose name/driver includes one of these strings +# devicefilter: _cpu_up,_cpu_down,i915,usb diff --git a/tools/power/pm-graph/config/suspend-callgraph.cfg b/tools/power/pm-graph/config/suspend-callgraph.cfg new file mode 100644 index 000000000..11b8cbc12 --- /dev/null +++ b/tools/power/pm-graph/config/suspend-callgraph.cfg @@ -0,0 +1,98 @@ +# +# Full Callgraph for S3 (Suspend to Mem) test +# +# This is the configuration file for sleepgraph. It contains +# all the tool arguments so that they don't have to be given on the +# command line. It also includes advanced settings for functions +# and kprobes. It is run like this +# +# sudo ./sleepgraph.py -config config/suspend.cfg +# +# NOTE: the output of this test is very large (> 30MB) + +[Settings] + +# ---- General Options ---- + +# Verbosity +# print verbose messages (default: false) +verbose: false + +# Suspend Mode +# e.g. standby, mem, freeze, disk (default: mem) +mode: mem + +# Output Directory Format +# output folder for html, ftrace, and dmesg. Use {date} and {time} for current values +output-dir: suspend-{hostname}-{date}-{time}-cg + +# Automatic Wakeup +# Use rtcwake to autoresume after X seconds, or off to disable (default: 15) +rtcwake: 15 + +# Add Logs +# add the dmesg and ftrace log to the html output (default: false) +addlogs: false + +# Suspend/Resume Gap +# insert a small visible gap between suspend and resume on the timeline (default: false) +srgap: false + +# ---- Advanced Options ---- + +# Command to execute in lieu of suspend (default: "") +# command: echo mem > /sys/power/state + +# Display user processes +# graph user processes and cpu usage in the timeline (default: false) +proc: false + +# Display function calls +# graph source functions in the timeline (default: false) +dev: false + +# Back to Back Suspend/Resume +# Run two suspend/resumes back to back (default: false) +x2: false + +# Back to Back Suspend Delay +# Time delay between the two test runs in ms (default: 0 ms) +x2delay: 0 + +# Pre Suspend Delay +# Include an N ms delay before (1st) suspend (default: 0 ms) +predelay: 0 + +# Post Resume Delay +# Include an N ms delay after (last) resume (default: 0 ms) +postdelay: 0 + +# Minimum Device Length +# graph only devices longer than min in the timeline (default: 0.001 ms) +mindev: 0.001 + +# ---- Debug Options ---- + +# Callgraph +# gather detailed ftrace callgraph data on all timeline events (default: false) +callgraph: true + +# Max graph depth +# limit the callgraph trace to this depth (default: 0 = all) +maxdepth: 5 + +# Expand Callgraph +# pre-expand the callgraph data in the html output (default: disabled) +expandcg: false + +# Minimum Callgraph Length +# provide callgraph data for blocks longer than min (default: 0.001 ms) +mincg: 1 + +# Timestamp Precision +# Number of significant digits in timestamps (0:S, [3:ms], 6:us) +timeprec: 6 + +# Device Filter +# show only devs whose name/driver includes one of these strings +# devicefilter: _cpu_up,_cpu_down,i915,usb diff --git a/tools/power/pm-graph/config/suspend-dev.cfg b/tools/power/pm-graph/config/suspend-dev.cfg new file mode 100644 index 000000000..56f1d21cc --- /dev/null +++ b/tools/power/pm-graph/config/suspend-dev.cfg @@ -0,0 +1,93 @@ +# +# Dev S3 (Suspend to Mem) test - includes src calls / kernel threads +# +# This is the configuration file for sleepgraph. It contains +# all the tool arguments so that they don't have to be given on the +# command line. It also includes advanced settings for functions +# and kprobes. It is run like this +# +# sudo ./sleepgraph.py -config config/suspend-dev.cfg +# + +[Settings] + +# ---- General Options ---- + +# Verbosity +# print verbose messages (default: false) +verbose: false + +# Suspend Mode +# e.g. standby, mem, freeze, disk (default: mem) +mode: mem + +# Output Directory Format +# output folder for html, ftrace, and dmesg. Use {date} and {time} for current values +output-dir: suspend-{hostname}-{date}-{time}-dev + +# Automatic Wakeup +# Use rtcwake to autoresume after X seconds, or off to disable (default: 15) +rtcwake: 15 + +# Add Logs +# add the dmesg and ftrace log to the html output (default: false) +addlogs: false + +# Suspend/Resume Gap +# insert a small visible gap between suspend and resume on the timeline (default: false) +srgap: false + +# ---- Advanced Options ---- + +# Command to execute in lieu of suspend (default: "") +# command: echo mem > /sys/power/state + +# Display user processes +# graph user processes and cpu usage in the timeline (default: false) +proc: false + +# Display function calls +# graph source functions in the timeline (default: false) +dev: true + +# Back to Back Suspend/Resume +# Run two suspend/resumes back to back (default: false) +x2: false + +# Back to Back Suspend Delay +# Time delay between the two test runs in ms (default: 0 ms) +x2delay: 0 + +# Pre Suspend Delay +# Include an N ms delay before (1st) suspend (default: 0 ms) +predelay: 0 + +# Post Resume Delay +# Include an N ms delay after (last) resume (default: 0 ms) +postdelay: 0 + +# Minimum Device Length +# graph only devices longer than min in the timeline (default: 0.001 ms) +mindev: 1 + +# ---- Debug Options ---- + +# Callgraph +# gather detailed ftrace callgraph data on all timeline events (default: false) +callgraph: false + +# Expand Callgraph +# pre-expand the callgraph data in the html output (default: disabled) +expandcg: false + +# Minimum Callgraph Length +# provide callgraph data for blocks longer than min (default: 0.001 ms) +mincg: 1 + +# Timestamp Precision +# Number of significant digits in timestamps (0:S, [3:ms], 6:us) +timeprec: 3 + +# Device Filter +# show only devs whose name/driver includes one of these strings +# devicefilter: _cpu_up,_cpu_down,i915,usb diff --git a/tools/power/pm-graph/config/suspend-x2-proc.cfg b/tools/power/pm-graph/config/suspend-x2-proc.cfg new file mode 100644 index 000000000..0ecca0ede --- /dev/null +++ b/tools/power/pm-graph/config/suspend-x2-proc.cfg @@ -0,0 +1,93 @@ +# +# Proc S3 (Suspend to Mem) x2 test - includes user processes +# +# This is the configuration file for sleepgraph. It contains +# all the tool arguments so that they don't have to be given on the +# command line. It also includes advanced settings for functions +# and kprobes. It is run like this +# +# sudo ./sleepgraph.py -config config/suspend-proc.cfg +# + +[Settings] + +# ---- General Options ---- + +# Verbosity +# print verbose messages (default: false) +verbose: false + +# Suspend Mode +# e.g. standby, mem, freeze, disk (default: mem) +mode: mem + +# Output Directory Format +# output folder for html, ftrace, and dmesg. Use {date} and {time} for current values +output-dir: suspend-{hostname}-{date}-{time}-x2-proc + +# Automatic Wakeup +# Use rtcwake to autoresume after X seconds, or off to disable (default: 15) +rtcwake: 15 + +# Add Logs +# add the dmesg and ftrace log to the html output (default: false) +addlogs: false + +# Suspend/Resume Gap +# insert a small visible gap between suspend and resume on the timeline (default: false) +srgap: false + +# ---- Advanced Options ---- + +# Command to execute in lieu of suspend (default: "") +# command: echo mem > /sys/power/state + +# Display user processes +# graph user processes and cpu usage in the timeline (default: false) +proc: true + +# Display function calls +# graph source functions in the timeline (default: false) +dev: false + +# Back to Back Suspend/Resume +# Run two suspend/resumes back to back (default: false) +x2: true + +# Back to Back Suspend Delay +# Time delay between the two test runs in ms (default: 0 ms) +x2delay: 1000 + +# Pre Suspend Delay +# Include an N ms delay before (1st) suspend (default: 0 ms) +predelay: 1000 + +# Post Resume Delay +# Include an N ms delay after (last) resume (default: 0 ms) +postdelay: 1000 + +# Minimum Device Length +# graph only devices longer than min in the timeline (default: 0.001 ms) +mindev: 1 + +# ---- Debug Options ---- + +# Callgraph +# gather detailed ftrace callgraph data on all timeline events (default: false) +callgraph: false + +# Expand Callgraph +# pre-expand the callgraph data in the html output (default: disabled) +expandcg: false + +# Minimum Callgraph Length +# provide callgraph data for blocks longer than min (default: 0.001 ms) +mincg: 1 + +# Timestamp Precision +# Number of significant digits in timestamps (0:S, [3:ms], 6:us) +timeprec: 3 + +# Device Filter +# show only devs whose name/driver includes one of these strings +# devicefilter: _cpu_up,_cpu_down,i915,usb diff --git a/tools/power/pm-graph/config/suspend.cfg b/tools/power/pm-graph/config/suspend.cfg new file mode 100644 index 000000000..70d293231 --- /dev/null +++ b/tools/power/pm-graph/config/suspend.cfg @@ -0,0 +1,93 @@ +# +# Generic S3 (Suspend to Mem) test +# +# This is the configuration file for sleepgraph. It contains +# all the tool arguments so that they don't have to be given on the +# command line. It also includes advanced settings for functions +# and kprobes. It is run like this +# +# sudo ./sleepgraph.py -config config/suspend.cfg +# + +[Settings] + +# ---- General Options ---- + +# Verbosity +# print verbose messages (default: false) +verbose: false + +# Suspend Mode +# e.g. standby, mem, freeze, disk (default: mem) +mode: mem + +# Output Directory Format +# output folder for html, ftrace, and dmesg. Use {date} and {time} for current values +output-dir: suspend-{hostname}-{date}-{time} + +# Automatic Wakeup +# Use rtcwake to autoresume after X seconds, or off to disable (default: 15) +rtcwake: 15 + +# Add Logs +# add the dmesg and ftrace log to the html output (default: false) +addlogs: false + +# Suspend/Resume Gap +# insert a small visible gap between suspend and resume on the timeline (default: false) +srgap: false + +# ---- Advanced Options ---- + +# Command to execute in lieu of suspend (default: "") +# command: echo mem > /sys/power/state + +# Display user processes +# graph user processes and cpu usage in the timeline (default: false) +proc: false + +# Display function calls +# graph source functions in the timeline (default: false) +dev: false + +# Back to Back Suspend/Resume +# Run two suspend/resumes back to back (default: false) +x2: false + +# Back to Back Suspend Delay +# Time delay between the two test runs in ms (default: 0 ms) +x2delay: 0 + +# Pre Suspend Delay +# Include an N ms delay before (1st) suspend (default: 0 ms) +predelay: 0 + +# Post Resume Delay +# Include an N ms delay after (last) resume (default: 0 ms) +postdelay: 0 + +# Minimum Device Length +# graph only devices longer than min in the timeline (default: 0.001 ms) +mindev: 0.001 + +# ---- Debug Options ---- + +# Callgraph +# gather detailed ftrace callgraph data on all timeline events (default: false) +callgraph: false + +# Expand Callgraph +# pre-expand the callgraph data in the html output (default: disabled) +expandcg: false + +# Minimum Callgraph Length +# provide callgraph data for blocks longer than min (default: 0.001 ms) +mincg: 1 + +# Timestamp Precision +# Number of significant digits in timestamps (0:S, [3:ms], 6:us) +timeprec: 3 + +# Device Filter +# show only devs whose name/driver includes one of these strings +# devicefilter: _cpu_up,_cpu_down,i915,usb diff --git a/tools/power/pm-graph/sleepgraph.8 b/tools/power/pm-graph/sleepgraph.8 new file mode 100644 index 000000000..5126271de --- /dev/null +++ b/tools/power/pm-graph/sleepgraph.8 @@ -0,0 +1,344 @@ +.TH SLEEPGRAPH 8 +.SH NAME +sleepgraph \- Suspend/Resume timing analysis +.SH SYNOPSIS +.ft B +.B sleepgraph +.RB [ OPTIONS ] +.RB [ COMMAND ] +.SH DESCRIPTION +\fBsleepgraph \fP is designed to assist kernel and OS developers +in optimizing their linux stack's suspend/resume time. Using a kernel +image built with a few extra options enabled, the tool will execute a +suspend and capture dmesg and ftrace data until resume is complete. +This data is transformed into a device timeline and an optional +callgraph to give a detailed view of which devices/subsystems are +taking the most time in suspend/resume. +.PP +If no specific command is given, the default behavior is to initiate +a suspend/resume. +.PP +Generates output files in subdirectory: suspend-yymmdd-HHMMSS + html timeline : <hostname>_<mode>.html + raw dmesg file : <hostname>_<mode>_dmesg.txt + raw ftrace file : <hostname>_<mode>_ftrace.txt +.SH OPTIONS +.TP +\fB-h\fR +Print the help text. +.TP +\fB-v\fR +Print the current tool version. +.TP +\fB-verbose\fR +Print extra information during execution and analysis. +.TP +\fB-config \fIfile\fR +Pull arguments and config options from a file. +.TP +\fB-m \fImode\fR +Mode to initiate for suspend e.g. standby, freeze, mem (default: mem). +.TP +\fB-o \fIname\fR +Overrides the output subdirectory name when running a new test. +Use {date}, {time}, {hostname} for current values. +.sp +e.g. suspend-{hostname}-{date}-{time} +.TP +\fB-rtcwake \fIt\fR | off +Use rtcwake to autoresume after \fIt\fR seconds (default: 15). Set t to "off" to +disable rtcwake and require a user keypress to resume. +.TP +\fB-addlogs\fR +Add the dmesg and ftrace logs to the html output. They will be viewable by +clicking buttons in the timeline. +.TP +\fB-noturbostat\fR +By default, if turbostat is found and the requested mode is freeze, sleepgraph +will execute the suspend via turbostat and collect data in the timeline log. +This option disables the use of turbostat. +.TP +\fB-result \fIfile\fR +Export a results table to a text file for parsing. +.TP +\fB-sync\fR +Sync the filesystems before starting the test. This reduces the size of +the sys_sync call which happens in the suspend_prepare phase. +.TP +\fB-rs \fIenable/disable\fR +During test, enable/disable runtime suspend for all devices. The test is delayed +by 5 seconds to allow runtime suspend changes to occur. The settings are restored +after the test is complete. +.TP +\fB-display \fIon/off/standby/suspend\fR +Switch the display to the requested mode for the test using the xset command. +This helps maintain the consistency of test data for better comparison. +.TP +\fB-wifi\fR +If a wifi connection is available, check that it reconnects after resume. Include +the reconnect time in the total resume time calculation and treat wifi timeouts +as resume failures. + +.SS "advanced" +.TP +\fB-gzip\fR +Gzip the trace and dmesg logs to save space. The tool can also read in gzipped +logs for processing. +.TP +\fB-cmd \fIstr\fR +Run the timeline over a custom suspend command, e.g. pm-suspend. By default +the tool forces suspend via /sys/power/state so this allows testing over +an OS's official suspend method. The output file will change to +hostname_command.html and will autodetect which suspend mode was triggered. +.TP +\fB-filter \fI"d1,d2,..."\fR +Filter out all but these device callbacks. These strings can be device names +or module names. e.g. 0000:00:02.0, ata5, i915, usb, etc. +.TP +\fB-mindev \fIt\fR +Discard all device callbacks shorter than \fIt\fR milliseconds (default: 0.0). +This reduces the html file size as there can be many tiny callbacks which are barely +visible. The value is a float: e.g. 0.001 represents 1 us. +.TP +\fB-proc\fR +Add usermode process info into the timeline (default: disabled). +.TP +\fB-dev\fR +Add kernel source calls and threads to the timeline (default: disabled). +.TP +\fB-x2\fR +Run two suspend/resumes back to back (default: disabled). +.TP +\fB-x2delay \fIt\fR +Include \fIt\fR ms delay between multiple test runs (default: 0 ms). +.TP +\fB-predelay \fIt\fR +Include \fIt\fR ms delay before 1st suspend (default: 0 ms). +.TP +\fB-postdelay \fIt\fR +Include \fIt\fR ms delay after last resume (default: 0 ms). +.TP +\fB-multi \fIn d\fR +Used for endurance testing. If \fIn\fR is entirely numeric, it's treated as a count: +Execute \fIn\fR consecutive tests at \fId\fR second intervals. +If \fIn\fR is an integer followed by a "d", "h", or "m", it's treated as a duration: +Execute tests continuously over \fIn\fR days, hours, or minutes at \fId\fR second intervals. +The outputs will be created in a new subdirectory, for count: suspend-{date}-{time}-xN, +for duration: suspend-{date}-{time}-Nm. When the multitest run is done, the \fI-summary\fR +command is called automatically to create summary html files for all the data (unless you +use \fI-skiphtml\fR). \fI-skiphtml\fR will speed up the testing by not creating timelines +or summary html files. You can then run the tool again at a later time with \fI-summary\fR +and \fI-genhtml\fR to create the timelines. +.TP +\fB-maxfail \fIn\fR +Abort a -multi run after \fIn\fR consecutive fails. 0 means never abort (default = 0). +.TP +\fB-skiphtml\fR +Run the test and capture the trace logs, but skip the timeline generation. +You can generate the html timelines later with \fI-dmesg\fR & \fI-ftrace\fR, or +by running \fI-summary\fR and \fI-genhtml\fR. + +.SS "ftrace debug" +.TP +\fB-f\fR +Use ftrace to create device callgraphs (default: disabled). This can produce +very large outputs, i.e. 10MB - 100MB. +.TP +\fB-ftop\fR +Use ftrace on the top level call: "suspend_devices_and_enter" only (default: disabled). +This option implies -f and creates a single callgraph covering all of suspend/resume. +.TP +\fB-maxdepth \fIlevel\fR +limit the callgraph trace depth to \fIlevel\fR (default: 0=all). This is +the best way to limit the output size when using callgraphs via -f. +.TP +\fB-expandcg\fR +pre-expand the callgraph data in the html output (default: disabled) +.TP +\fB-fadd \fIfile\fR +Add functions to be graphed in the timeline from a list in a text file +.TP +\fB-mincg \fIt\fR +Discard all callgraphs shorter than \fIt\fR milliseconds (default: 0.0). +This reduces the html file size as there can be many tiny callgraphs +which are barely visible in the timeline. +The value is a float: e.g. 0.001 represents 1 us. +.TP +\fB-cgfilter \fI"func1,func2,..."\fR +Reduce callgraph output in the timeline by limiting it certain devices. The +argument can be a single device name or a comma delimited list. +(default: none) +.TP +\fB-cgskip \fIfile\fR +Reduce callgraph timeline size by skipping over uninteresting functions +in the trace, e.g. printk or console_unlock. The functions listed +in this file will show up as empty leaves in the callgraph with only the start/end +times displayed. cgskip.txt is used automatically if found in the path, so +use "off" to disable completely (default: cgskip.txt) +.TP +\fB-cgphase \fIp\fR +Only show callgraph data for phase \fIp\fR (e.g. suspend_late). +.TP +\fB-cgtest \fIn\fR +In an x2 run, only show callgraph data for test \fIn\fR (e.g. 0 or 1). +.TP +\fB-timeprec \fIn\fR +Number of significant digits in timestamps (0:S, [3:ms], 6:us). +.TP +\fB-bufsize \fIN\fR +Set trace buffer size to N kilo-bytes (default: all of free memory up to 3GB) + +.SH COMMANDS +.TP +\fB-summary \fIindir\fR +Create a set of summary pages for all tests in \fIindir\fR recursively. +Creates summary.html, summary-issues.html, and summary-devices.html in the current folder. +summary.html is a table of tests with relevant info sorted by kernel/host/mode, +and links to the test html files. It identifies the minimum, maximum, and median +suspend and resume times for you with highlights and links in the header. +summary-issues.html is a list of kernel issues found in dmesg from all the tests. +summary-devices.html is a list of devices and times from all the tests. + +Use \fI-genhtml\fR to regenerate any tests with missing html. +.TP +\fB-genhtml\fR +Used with \fI-summary\fR to regenerate any missing html timelines from their +dmesg and ftrace logs. This will require a significant amount of time if there +are thousands of tests. +.TP +\fB-modes\fR +List available suspend modes. +.TP +\fB-status\fR +Test to see if the system is able to run this tool. Use this along +with any options you intend to use to see if they will work. +.TP +\fB-fpdt\fR +Print out the contents of the ACPI Firmware Performance Data Table. +.TP +\fB-wificheck\fR +Print out wifi status and connection details. +.TP +\fB-xon/-xoff/-xstandby/-xsuspend\fR +Test xset by attempting to switch the display to the given mode. This +is the same command which will be issued by \fB-display \fImode\fR. +.TP +\fB-xstat\fR +Get the current DPMS display mode. +.TP +\fB-sysinfo\fR +Print out system info extracted from BIOS. Reads /dev/mem directly instead of going through dmidecode. +.TP +\fB-devinfo\fR +Print out the pm settings of all devices which support runtime suspend. +.TP +\fB-cmdinfo\fR +Print out all the platform data collected from the system that makes it into the logs. +.TP +\fB-flist\fR +Print the list of ftrace functions currently being captured. Functions +that are not available as symbols in the current kernel are shown in red. +By default, the tool traces a list of important suspend/resume functions +in order to better fill out the timeline. If the user has added their own +with -fadd they will also be checked. +.TP +\fB-flistall\fR +Print all ftrace functions capable of being captured. These are all the +possible values you can add to trace via the -fadd argument. +.SS "rebuild" +.TP +\fB-ftrace \fIfile\fR +Create HTML output from an existing ftrace file. +.TP +\fB-dmesg \fIfile\fR +Create HTML output from an existing dmesg file. + +.SH EXAMPLES +.SS "simple commands" +Check which suspend modes are currently supported. +.IP +\f(CW$ sleepgraph -modes\fR +.PP +Read the Firmware Performance Data Table (FPDT) +.IP +\f(CW$ sudo sleepgraph -fpdt\fR +.PP +Print out the current USB power topology +.IP +\f(CW$ sleepgraph -usbtopo +.PP +Verify that you can run a command with a set of arguments +.IP +\f(CW$ sudo sleepgraph -f -rtcwake 30 -status +.PP +Generate a summary of all timelines in a particular folder. +.IP +\f(CW$ sleepgraph -summary ~/workspace/myresults/\fR +.PP + +.SS "capturing basic timelines" +Execute a mem suspend with a 15 second wakeup. Include the logs in the html. +.IP +\f(CW$ sudo sleepgraph -rtcwake 15 -addlogs\fR +.PP +Execute a standby with a 15 second wakeup. Change the output folder name. +.IP +\f(CW$ sudo sleepgraph -m standby -rtcwake 15 -o "standby-{host}-{date}-{time}"\fR +.PP +Execute a freeze with no wakeup (require keypress). Change output folder name. +.IP +\f(CW$ sudo sleepgraph -m freeze -rtcwake off -o "freeze-{hostname}-{date}-{time}"\fR +.PP + +.SS "capturing advanced timelines" +Execute a suspend & include dev mode source calls, limit callbacks to 5ms or larger. +.IP +\f(CW$ sudo sleepgraph -m mem -rtcwake 15 -dev -mindev 5\fR +.PP +Run two suspends back to back, include a 500ms delay before, after, and in between runs. +.IP +\f(CW$ sudo sleepgraph -m mem -rtcwake 15 -x2 -predelay 500 -x2delay 500 -postdelay 500\fR +.PP +Execute a suspend using a custom command. +.IP +\f(CW$ sudo sleepgraph -cmd "echo mem > /sys/power/state" -rtcwake 15\fR +.PP + +.SS "endurance testing using -multi" +.PP +Do a batch run of 10 freezes with 30 seconds delay between runs. +.IP +\f(CW$ sudo sleepgraph -m freeze -rtcwake 15 -multi 10 30\fR +.PP +Do a batch run of freezes for 24 hours. +.IP +\f(CW$ sudo sleepgraph -m freeze -rtcwake 15 -multi 24h 0\fR + +.SS "adding callgraph data" +Add device callgraphs. Limit the trace depth and only show callgraphs 10ms or larger. +.IP +\f(CW$ sudo sleepgraph -m mem -rtcwake 15 -f -maxdepth 5 -mincg 10\fR +.PP +Capture a full callgraph across all suspend, then filter the html by a single phase. +.IP +\f(CW$ sudo sleepgraph -m mem -rtcwake 15 -f\fR +.IP +\f(CW$ sleepgraph -dmesg host_mem_dmesg.txt -ftrace host_mem_ftrace.txt -f -cgphase resume +.PP + +.SS "rebuild timeline from logs" +.PP +Rebuild the html from a previous run's logs, using the same options. +.IP +\f(CW$ sleepgraph -dmesg dmesg.txt -ftrace ftrace.txt -callgraph\fR +.PP +Rebuild the html with different options. +.IP +\f(CW$ sleepgraph -dmesg dmesg.txt -ftrace ftrace.txt -addlogs -srgap\fR + +.SH "SEE ALSO" +dmesg(1) +.PP +.SH AUTHOR +.nf +Written by Todd Brandt <todd.e.brandt@linux.intel.com> diff --git a/tools/power/pm-graph/sleepgraph.py b/tools/power/pm-graph/sleepgraph.py new file mode 100755 index 000000000..1bc36a1db --- /dev/null +++ b/tools/power/pm-graph/sleepgraph.py @@ -0,0 +1,6906 @@ +#!/usr/bin/env python3 +# SPDX-License-Identifier: GPL-2.0-only +# +# Tool for analyzing suspend/resume timing +# Copyright (c) 2013, Intel Corporation. +# +# This program is free software; you can redistribute it and/or modify it +# under the terms and conditions of the GNU General Public License, +# version 2, as published by the Free Software Foundation. +# +# This program is distributed in the hope it will be useful, but WITHOUT +# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or +# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for +# more details. +# +# Authors: +# Todd Brandt <todd.e.brandt@linux.intel.com> +# +# Links: +# Home Page +# https://01.org/pm-graph +# Source repo +# git@github.com:intel/pm-graph +# +# Description: +# This tool is designed to assist kernel and OS developers in optimizing +# their linux stack's suspend/resume time. Using a kernel image built +# with a few extra options enabled, the tool will execute a suspend and +# will capture dmesg and ftrace data until resume is complete. This data +# is transformed into a device timeline and a callgraph to give a quick +# and detailed view of which devices and callbacks are taking the most +# time in suspend/resume. The output is a single html file which can be +# viewed in firefox or chrome. +# +# The following kernel build options are required: +# CONFIG_DEVMEM=y +# CONFIG_PM_DEBUG=y +# CONFIG_PM_SLEEP_DEBUG=y +# CONFIG_FTRACE=y +# CONFIG_FUNCTION_TRACER=y +# CONFIG_FUNCTION_GRAPH_TRACER=y +# CONFIG_KPROBES=y +# CONFIG_KPROBES_ON_FTRACE=y +# +# For kernel versions older than 3.15: +# The following additional kernel parameters are required: +# (e.g. in file /etc/default/grub) +# GRUB_CMDLINE_LINUX_DEFAULT="... initcall_debug log_buf_len=16M ..." +# + +# ----------------- LIBRARIES -------------------- + +import sys +import time +import os +import string +import re +import platform +import signal +import codecs +from datetime import datetime, timedelta +import struct +import configparser +import gzip +from threading import Thread +from subprocess import call, Popen, PIPE +import base64 + +def pprint(msg): + print(msg) + sys.stdout.flush() + +def ascii(text): + return text.decode('ascii', 'ignore') + +# ----------------- CLASSES -------------------- + +# Class: SystemValues +# Description: +# A global, single-instance container used to +# store system values and test parameters +class SystemValues: + title = 'SleepGraph' + version = '5.7' + ansi = False + rs = 0 + display = '' + gzip = False + sync = False + wifi = False + verbose = False + testlog = True + dmesglog = True + ftracelog = False + tstat = True + mindevlen = 0.0 + mincglen = 0.0 + cgphase = '' + cgtest = -1 + cgskip = '' + maxfail = 0 + multitest = {'run': False, 'count': 1000000, 'delay': 0} + max_graph_depth = 0 + callloopmaxgap = 0.0001 + callloopmaxlen = 0.005 + bufsize = 0 + cpucount = 0 + memtotal = 204800 + memfree = 204800 + srgap = 0 + cgexp = False + testdir = '' + outdir = '' + tpath = '/sys/kernel/debug/tracing/' + fpdtpath = '/sys/firmware/acpi/tables/FPDT' + epath = '/sys/kernel/debug/tracing/events/power/' + pmdpath = '/sys/power/pm_debug_messages' + traceevents = [ + 'suspend_resume', + 'wakeup_source_activate', + 'wakeup_source_deactivate', + 'device_pm_callback_end', + 'device_pm_callback_start' + ] + logmsg = '' + testcommand = '' + mempath = '/dev/mem' + powerfile = '/sys/power/state' + mempowerfile = '/sys/power/mem_sleep' + diskpowerfile = '/sys/power/disk' + suspendmode = 'mem' + memmode = '' + diskmode = '' + hostname = 'localhost' + prefix = 'test' + teststamp = '' + sysstamp = '' + dmesgstart = 0.0 + dmesgfile = '' + ftracefile = '' + htmlfile = 'output.html' + result = '' + rtcwake = True + rtcwaketime = 15 + rtcpath = '' + devicefilter = [] + cgfilter = [] + stamp = 0 + execcount = 1 + x2delay = 0 + skiphtml = False + usecallgraph = False + ftopfunc = 'pm_suspend' + ftop = False + usetraceevents = False + usetracemarkers = True + usekprobes = True + usedevsrc = False + useprocmon = False + notestrun = False + cgdump = False + devdump = False + mixedphaseheight = True + devprops = dict() + platinfo = [] + predelay = 0 + postdelay = 0 + pmdebug = '' + tmstart = 'SUSPEND START %Y%m%d-%H:%M:%S.%f' + tmend = 'RESUME COMPLETE %Y%m%d-%H:%M:%S.%f' + tracefuncs = { + 'sys_sync': {}, + 'ksys_sync': {}, + 'pm_notifier_call_chain_robust': {}, + 'pm_prepare_console': {}, + 'pm_notifier_call_chain': {}, + 'freeze_processes': {}, + 'freeze_kernel_threads': {}, + 'pm_restrict_gfp_mask': {}, + 'acpi_suspend_begin': {}, + 'acpi_hibernation_begin': {}, + 'acpi_hibernation_enter': {}, + 'acpi_hibernation_leave': {}, + 'acpi_pm_freeze': {}, + 'acpi_pm_thaw': {}, + 'acpi_s2idle_end': {}, + 'acpi_s2idle_sync': {}, + 'acpi_s2idle_begin': {}, + 'acpi_s2idle_prepare': {}, + 'acpi_s2idle_prepare_late': {}, + 'acpi_s2idle_wake': {}, + 'acpi_s2idle_wakeup': {}, + 'acpi_s2idle_restore': {}, + 'acpi_s2idle_restore_early': {}, + 'hibernate_preallocate_memory': {}, + 'create_basic_memory_bitmaps': {}, + 'swsusp_write': {}, + 'suspend_console': {}, + 'acpi_pm_prepare': {}, + 'syscore_suspend': {}, + 'arch_enable_nonboot_cpus_end': {}, + 'syscore_resume': {}, + 'acpi_pm_finish': {}, + 'resume_console': {}, + 'acpi_pm_end': {}, + 'pm_restore_gfp_mask': {}, + 'thaw_processes': {}, + 'pm_restore_console': {}, + 'CPU_OFF': { + 'func':'_cpu_down', + 'args_x86_64': {'cpu':'%di:s32'}, + 'format': 'CPU_OFF[{cpu}]' + }, + 'CPU_ON': { + 'func':'_cpu_up', + 'args_x86_64': {'cpu':'%di:s32'}, + 'format': 'CPU_ON[{cpu}]' + }, + } + dev_tracefuncs = { + # general wait/delay/sleep + 'msleep': { 'args_x86_64': {'time':'%di:s32'}, 'ub': 1 }, + 'schedule_timeout': { 'args_x86_64': {'timeout':'%di:s32'}, 'ub': 1 }, + 'udelay': { 'func':'__const_udelay', 'args_x86_64': {'loops':'%di:s32'}, 'ub': 1 }, + 'usleep_range': { 'args_x86_64': {'min':'%di:s32', 'max':'%si:s32'}, 'ub': 1 }, + 'mutex_lock_slowpath': { 'func':'__mutex_lock_slowpath', 'ub': 1 }, + 'acpi_os_stall': {'ub': 1}, + 'rt_mutex_slowlock': {'ub': 1}, + # ACPI + 'acpi_resume_power_resources': {}, + 'acpi_ps_execute_method': { 'args_x86_64': { + 'fullpath':'+0(+40(%di)):string', + }}, + # mei_me + 'mei_reset': {}, + # filesystem + 'ext4_sync_fs': {}, + # 80211 + 'ath10k_bmi_read_memory': { 'args_x86_64': {'length':'%cx:s32'} }, + 'ath10k_bmi_write_memory': { 'args_x86_64': {'length':'%cx:s32'} }, + 'ath10k_bmi_fast_download': { 'args_x86_64': {'length':'%cx:s32'} }, + 'iwlagn_mac_start': {}, + 'iwlagn_alloc_bcast_station': {}, + 'iwl_trans_pcie_start_hw': {}, + 'iwl_trans_pcie_start_fw': {}, + 'iwl_run_init_ucode': {}, + 'iwl_load_ucode_wait_alive': {}, + 'iwl_alive_start': {}, + 'iwlagn_mac_stop': {}, + 'iwlagn_mac_suspend': {}, + 'iwlagn_mac_resume': {}, + 'iwlagn_mac_add_interface': {}, + 'iwlagn_mac_remove_interface': {}, + 'iwlagn_mac_change_interface': {}, + 'iwlagn_mac_config': {}, + 'iwlagn_configure_filter': {}, + 'iwlagn_mac_hw_scan': {}, + 'iwlagn_bss_info_changed': {}, + 'iwlagn_mac_channel_switch': {}, + 'iwlagn_mac_flush': {}, + # ATA + 'ata_eh_recover': { 'args_x86_64': {'port':'+36(%di):s32'} }, + # i915 + 'i915_gem_resume': {}, + 'i915_restore_state': {}, + 'intel_opregion_setup': {}, + 'g4x_pre_enable_dp': {}, + 'vlv_pre_enable_dp': {}, + 'chv_pre_enable_dp': {}, + 'g4x_enable_dp': {}, + 'vlv_enable_dp': {}, + 'intel_hpd_init': {}, + 'intel_opregion_register': {}, + 'intel_dp_detect': {}, + 'intel_hdmi_detect': {}, + 'intel_opregion_init': {}, + 'intel_fbdev_set_suspend': {}, + } + infocmds = [ + [0, 'kparams', 'cat', '/proc/cmdline'], + [0, 'mcelog', 'mcelog'], + [0, 'pcidevices', 'lspci', '-tv'], + [0, 'usbdevices', 'lsusb', '-t'], + [1, 'interrupts', 'cat', '/proc/interrupts'], + [1, 'wakeups', 'cat', '/sys/kernel/debug/wakeup_sources'], + [2, 'gpecounts', 'sh', '-c', 'grep -v invalid /sys/firmware/acpi/interrupts/*'], + [2, 'suspendstats', 'sh', '-c', 'grep -v invalid /sys/power/suspend_stats/*'], + [2, 'cpuidle', 'sh', '-c', 'grep -v invalid /sys/devices/system/cpu/cpu*/cpuidle/state*/s2idle/*'], + [2, 'battery', 'sh', '-c', 'grep -v invalid /sys/class/power_supply/*/*'], + ] + cgblacklist = [] + kprobes = dict() + timeformat = '%.3f' + cmdline = '%s %s' % \ + (os.path.basename(sys.argv[0]), ' '.join(sys.argv[1:])) + sudouser = '' + def __init__(self): + self.archargs = 'args_'+platform.machine() + self.hostname = platform.node() + if(self.hostname == ''): + self.hostname = 'localhost' + rtc = "rtc0" + if os.path.exists('/dev/rtc'): + rtc = os.readlink('/dev/rtc') + rtc = '/sys/class/rtc/'+rtc + if os.path.exists(rtc) and os.path.exists(rtc+'/date') and \ + os.path.exists(rtc+'/time') and os.path.exists(rtc+'/wakealarm'): + self.rtcpath = rtc + if (hasattr(sys.stdout, 'isatty') and sys.stdout.isatty()): + self.ansi = True + self.testdir = datetime.now().strftime('suspend-%y%m%d-%H%M%S') + if os.getuid() == 0 and 'SUDO_USER' in os.environ and \ + os.environ['SUDO_USER']: + self.sudouser = os.environ['SUDO_USER'] + def resetlog(self): + self.logmsg = '' + self.platinfo = [] + def vprint(self, msg): + self.logmsg += msg+'\n' + if self.verbose or msg.startswith('WARNING:'): + pprint(msg) + def signalHandler(self, signum, frame): + if not self.result: + return + signame = self.signames[signum] if signum in self.signames else 'UNKNOWN' + msg = 'Signal %s caused a tool exit, line %d' % (signame, frame.f_lineno) + self.outputResult({'error':msg}) + sys.exit(3) + def signalHandlerInit(self): + capture = ['BUS', 'SYS', 'XCPU', 'XFSZ', 'PWR', 'HUP', 'INT', 'QUIT', + 'ILL', 'ABRT', 'FPE', 'SEGV', 'TERM'] + self.signames = dict() + for i in capture: + s = 'SIG'+i + try: + signum = getattr(signal, s) + signal.signal(signum, self.signalHandler) + except: + continue + self.signames[signum] = s + def rootCheck(self, fatal=True): + if(os.access(self.powerfile, os.W_OK)): + return True + if fatal: + msg = 'This command requires sysfs mount and root access' + pprint('ERROR: %s\n' % msg) + self.outputResult({'error':msg}) + sys.exit(1) + return False + def rootUser(self, fatal=False): + if 'USER' in os.environ and os.environ['USER'] == 'root': + return True + if fatal: + msg = 'This command must be run as root' + pprint('ERROR: %s\n' % msg) + self.outputResult({'error':msg}) + sys.exit(1) + return False + def usable(self, file): + return (os.path.exists(file) and os.path.getsize(file) > 0) + def getExec(self, cmd): + try: + fp = Popen(['which', cmd], stdout=PIPE, stderr=PIPE).stdout + out = ascii(fp.read()).strip() + fp.close() + except: + out = '' + if out: + return out + for path in ['/sbin', '/bin', '/usr/sbin', '/usr/bin', + '/usr/local/sbin', '/usr/local/bin']: + cmdfull = os.path.join(path, cmd) + if os.path.exists(cmdfull): + return cmdfull + return out + def setPrecision(self, num): + if num < 0 or num > 6: + return + self.timeformat = '%.{0}f'.format(num) + def setOutputFolder(self, value): + args = dict() + n = datetime.now() + args['date'] = n.strftime('%y%m%d') + args['time'] = n.strftime('%H%M%S') + args['hostname'] = args['host'] = self.hostname + args['mode'] = self.suspendmode + return value.format(**args) + def setOutputFile(self): + if self.dmesgfile != '': + m = re.match('(?P<name>.*)_dmesg\.txt.*', self.dmesgfile) + if(m): + self.htmlfile = m.group('name')+'.html' + if self.ftracefile != '': + m = re.match('(?P<name>.*)_ftrace\.txt.*', self.ftracefile) + if(m): + self.htmlfile = m.group('name')+'.html' + def systemInfo(self, info): + p = m = '' + if 'baseboard-manufacturer' in info: + m = info['baseboard-manufacturer'] + elif 'system-manufacturer' in info: + m = info['system-manufacturer'] + if 'system-product-name' in info: + p = info['system-product-name'] + elif 'baseboard-product-name' in info: + p = info['baseboard-product-name'] + if m[:5].lower() == 'intel' and 'baseboard-product-name' in info: + p = info['baseboard-product-name'] + c = info['processor-version'] if 'processor-version' in info else '' + b = info['bios-version'] if 'bios-version' in info else '' + r = info['bios-release-date'] if 'bios-release-date' in info else '' + self.sysstamp = '# sysinfo | man:%s | plat:%s | cpu:%s | bios:%s | biosdate:%s | numcpu:%d | memsz:%d | memfr:%d' % \ + (m, p, c, b, r, self.cpucount, self.memtotal, self.memfree) + def printSystemInfo(self, fatal=False): + self.rootCheck(True) + out = dmidecode(self.mempath, fatal) + if len(out) < 1: + return + fmt = '%-24s: %s' + for name in sorted(out): + print(fmt % (name, out[name])) + print(fmt % ('cpucount', ('%d' % self.cpucount))) + print(fmt % ('memtotal', ('%d kB' % self.memtotal))) + print(fmt % ('memfree', ('%d kB' % self.memfree))) + def cpuInfo(self): + self.cpucount = 0 + fp = open('/proc/cpuinfo', 'r') + for line in fp: + if re.match('^processor[ \t]*:[ \t]*[0-9]*', line): + self.cpucount += 1 + fp.close() + fp = open('/proc/meminfo', 'r') + for line in fp: + m = re.match('^MemTotal:[ \t]*(?P<sz>[0-9]*) *kB', line) + if m: + self.memtotal = int(m.group('sz')) + m = re.match('^MemFree:[ \t]*(?P<sz>[0-9]*) *kB', line) + if m: + self.memfree = int(m.group('sz')) + fp.close() + def initTestOutput(self, name): + self.prefix = self.hostname + v = open('/proc/version', 'r').read().strip() + kver = v.split()[2] + fmt = name+'-%m%d%y-%H%M%S' + testtime = datetime.now().strftime(fmt) + self.teststamp = \ + '# '+testtime+' '+self.prefix+' '+self.suspendmode+' '+kver + ext = '' + if self.gzip: + ext = '.gz' + self.dmesgfile = \ + self.testdir+'/'+self.prefix+'_'+self.suspendmode+'_dmesg.txt'+ext + self.ftracefile = \ + self.testdir+'/'+self.prefix+'_'+self.suspendmode+'_ftrace.txt'+ext + self.htmlfile = \ + self.testdir+'/'+self.prefix+'_'+self.suspendmode+'.html' + if not os.path.isdir(self.testdir): + os.makedirs(self.testdir) + self.sudoUserchown(self.testdir) + def getValueList(self, value): + out = [] + for i in value.split(','): + if i.strip(): + out.append(i.strip()) + return out + def setDeviceFilter(self, value): + self.devicefilter = self.getValueList(value) + def setCallgraphFilter(self, value): + self.cgfilter = self.getValueList(value) + def skipKprobes(self, value): + for k in self.getValueList(value): + if k in self.tracefuncs: + del self.tracefuncs[k] + if k in self.dev_tracefuncs: + del self.dev_tracefuncs[k] + def setCallgraphBlacklist(self, file): + self.cgblacklist = self.listFromFile(file) + def rtcWakeAlarmOn(self): + call('echo 0 > '+self.rtcpath+'/wakealarm', shell=True) + nowtime = open(self.rtcpath+'/since_epoch', 'r').read().strip() + if nowtime: + nowtime = int(nowtime) + else: + # if hardware time fails, use the software time + nowtime = int(datetime.now().strftime('%s')) + alarm = nowtime + self.rtcwaketime + call('echo %d > %s/wakealarm' % (alarm, self.rtcpath), shell=True) + def rtcWakeAlarmOff(self): + call('echo 0 > %s/wakealarm' % self.rtcpath, shell=True) + def initdmesg(self): + # get the latest time stamp from the dmesg log + fp = Popen('dmesg', stdout=PIPE).stdout + ktime = '0' + for line in fp: + line = ascii(line).replace('\r\n', '') + idx = line.find('[') + if idx > 1: + line = line[idx:] + m = re.match('[ \t]*(\[ *)(?P<ktime>[0-9\.]*)(\]) (?P<msg>.*)', line) + if(m): + ktime = m.group('ktime') + fp.close() + self.dmesgstart = float(ktime) + def getdmesg(self, testdata): + op = self.writeDatafileHeader(self.dmesgfile, testdata) + # store all new dmesg lines since initdmesg was called + fp = Popen('dmesg', stdout=PIPE).stdout + for line in fp: + line = ascii(line).replace('\r\n', '') + idx = line.find('[') + if idx > 1: + line = line[idx:] + m = re.match('[ \t]*(\[ *)(?P<ktime>[0-9\.]*)(\]) (?P<msg>.*)', line) + if(not m): + continue + ktime = float(m.group('ktime')) + if ktime > self.dmesgstart: + op.write(line) + fp.close() + op.close() + def listFromFile(self, file): + list = [] + fp = open(file) + for i in fp.read().split('\n'): + i = i.strip() + if i and i[0] != '#': + list.append(i) + fp.close() + return list + def addFtraceFilterFunctions(self, file): + for i in self.listFromFile(file): + if len(i) < 2: + continue + self.tracefuncs[i] = dict() + def getFtraceFilterFunctions(self, current): + self.rootCheck(True) + if not current: + call('cat '+self.tpath+'available_filter_functions', shell=True) + return + master = self.listFromFile(self.tpath+'available_filter_functions') + for i in sorted(self.tracefuncs): + if 'func' in self.tracefuncs[i]: + i = self.tracefuncs[i]['func'] + if i in master: + print(i) + else: + print(self.colorText(i)) + def setFtraceFilterFunctions(self, list): + master = self.listFromFile(self.tpath+'available_filter_functions') + flist = '' + for i in list: + if i not in master: + continue + if ' [' in i: + flist += i.split(' ')[0]+'\n' + else: + flist += i+'\n' + fp = open(self.tpath+'set_graph_function', 'w') + fp.write(flist) + fp.close() + def basicKprobe(self, name): + self.kprobes[name] = {'name': name,'func': name,'args': dict(),'format': name} + def defaultKprobe(self, name, kdata): + k = kdata + for field in ['name', 'format', 'func']: + if field not in k: + k[field] = name + if self.archargs in k: + k['args'] = k[self.archargs] + else: + k['args'] = dict() + k['format'] = name + self.kprobes[name] = k + def kprobeColor(self, name): + if name not in self.kprobes or 'color' not in self.kprobes[name]: + return '' + return self.kprobes[name]['color'] + def kprobeDisplayName(self, name, dataraw): + if name not in self.kprobes: + self.basicKprobe(name) + data = '' + quote=0 + # first remvoe any spaces inside quotes, and the quotes + for c in dataraw: + if c == '"': + quote = (quote + 1) % 2 + if quote and c == ' ': + data += '_' + elif c != '"': + data += c + fmt, args = self.kprobes[name]['format'], self.kprobes[name]['args'] + arglist = dict() + # now process the args + for arg in sorted(args): + arglist[arg] = '' + m = re.match('.* '+arg+'=(?P<arg>.*) ', data); + if m: + arglist[arg] = m.group('arg') + else: + m = re.match('.* '+arg+'=(?P<arg>.*)', data); + if m: + arglist[arg] = m.group('arg') + out = fmt.format(**arglist) + out = out.replace(' ', '_').replace('"', '') + return out + def kprobeText(self, kname, kprobe): + name = fmt = func = kname + args = dict() + if 'name' in kprobe: + name = kprobe['name'] + if 'format' in kprobe: + fmt = kprobe['format'] + if 'func' in kprobe: + func = kprobe['func'] + if self.archargs in kprobe: + args = kprobe[self.archargs] + if 'args' in kprobe: + args = kprobe['args'] + if re.findall('{(?P<n>[a-z,A-Z,0-9]*)}', func): + doError('Kprobe "%s" has format info in the function name "%s"' % (name, func)) + for arg in re.findall('{(?P<n>[a-z,A-Z,0-9]*)}', fmt): + if arg not in args: + doError('Kprobe "%s" is missing argument "%s"' % (name, arg)) + val = 'p:%s_cal %s' % (name, func) + for i in sorted(args): + val += ' %s=%s' % (i, args[i]) + val += '\nr:%s_ret %s $retval\n' % (name, func) + return val + def addKprobes(self, output=False): + if len(self.kprobes) < 1: + return + if output: + pprint(' kprobe functions in this kernel:') + # first test each kprobe + rejects = [] + # sort kprobes: trace, ub-dev, custom, dev + kpl = [[], [], [], []] + linesout = len(self.kprobes) + for name in sorted(self.kprobes): + res = self.colorText('YES', 32) + if not self.testKprobe(name, self.kprobes[name]): + res = self.colorText('NO') + rejects.append(name) + else: + if name in self.tracefuncs: + kpl[0].append(name) + elif name in self.dev_tracefuncs: + if 'ub' in self.dev_tracefuncs[name]: + kpl[1].append(name) + else: + kpl[3].append(name) + else: + kpl[2].append(name) + if output: + pprint(' %s: %s' % (name, res)) + kplist = kpl[0] + kpl[1] + kpl[2] + kpl[3] + # remove all failed ones from the list + for name in rejects: + self.kprobes.pop(name) + # set the kprobes all at once + self.fsetVal('', 'kprobe_events') + kprobeevents = '' + for kp in kplist: + kprobeevents += self.kprobeText(kp, self.kprobes[kp]) + self.fsetVal(kprobeevents, 'kprobe_events') + if output: + check = self.fgetVal('kprobe_events') + linesack = (len(check.split('\n')) - 1) // 2 + pprint(' kprobe functions enabled: %d/%d' % (linesack, linesout)) + self.fsetVal('1', 'events/kprobes/enable') + def testKprobe(self, kname, kprobe): + self.fsetVal('0', 'events/kprobes/enable') + kprobeevents = self.kprobeText(kname, kprobe) + if not kprobeevents: + return False + try: + self.fsetVal(kprobeevents, 'kprobe_events') + check = self.fgetVal('kprobe_events') + except: + return False + linesout = len(kprobeevents.split('\n')) + linesack = len(check.split('\n')) + if linesack < linesout: + return False + return True + def setVal(self, val, file): + if not os.path.exists(file): + return False + try: + fp = open(file, 'wb', 0) + fp.write(val.encode()) + fp.flush() + fp.close() + except: + return False + return True + def fsetVal(self, val, path): + return self.setVal(val, self.tpath+path) + def getVal(self, file): + res = '' + if not os.path.exists(file): + return res + try: + fp = open(file, 'r') + res = fp.read() + fp.close() + except: + pass + return res + def fgetVal(self, path): + return self.getVal(self.tpath+path) + def cleanupFtrace(self): + if(self.usecallgraph or self.usetraceevents or self.usedevsrc): + self.fsetVal('0', 'events/kprobes/enable') + self.fsetVal('', 'kprobe_events') + self.fsetVal('1024', 'buffer_size_kb') + if self.pmdebug: + self.setVal(self.pmdebug, self.pmdpath) + def setupAllKprobes(self): + for name in self.tracefuncs: + self.defaultKprobe(name, self.tracefuncs[name]) + for name in self.dev_tracefuncs: + self.defaultKprobe(name, self.dev_tracefuncs[name]) + def isCallgraphFunc(self, name): + if len(self.tracefuncs) < 1 and self.suspendmode == 'command': + return True + for i in self.tracefuncs: + if 'func' in self.tracefuncs[i]: + f = self.tracefuncs[i]['func'] + else: + f = i + if name == f: + return True + return False + def initFtrace(self, quiet=False): + if not quiet: + sysvals.printSystemInfo(False) + pprint('INITIALIZING FTRACE...') + # turn trace off + self.fsetVal('0', 'tracing_on') + self.cleanupFtrace() + # pm debug messages + pv = self.getVal(self.pmdpath) + if pv != '1': + self.setVal('1', self.pmdpath) + self.pmdebug = pv + # set the trace clock to global + self.fsetVal('global', 'trace_clock') + self.fsetVal('nop', 'current_tracer') + # set trace buffer to an appropriate value + cpus = max(1, self.cpucount) + if self.bufsize > 0: + tgtsize = self.bufsize + elif self.usecallgraph or self.usedevsrc: + bmax = (1*1024*1024) if self.suspendmode in ['disk', 'command'] \ + else (3*1024*1024) + tgtsize = min(self.memfree, bmax) + else: + tgtsize = 65536 + while not self.fsetVal('%d' % (tgtsize // cpus), 'buffer_size_kb'): + # if the size failed to set, lower it and keep trying + tgtsize -= 65536 + if tgtsize < 65536: + tgtsize = int(self.fgetVal('buffer_size_kb')) * cpus + break + self.vprint('Setting trace buffers to %d kB (%d kB per cpu)' % (tgtsize, tgtsize/cpus)) + # initialize the callgraph trace + if(self.usecallgraph): + # set trace type + self.fsetVal('function_graph', 'current_tracer') + self.fsetVal('', 'set_ftrace_filter') + # set trace format options + self.fsetVal('print-parent', 'trace_options') + self.fsetVal('funcgraph-abstime', 'trace_options') + self.fsetVal('funcgraph-cpu', 'trace_options') + self.fsetVal('funcgraph-duration', 'trace_options') + self.fsetVal('funcgraph-proc', 'trace_options') + self.fsetVal('funcgraph-tail', 'trace_options') + self.fsetVal('nofuncgraph-overhead', 'trace_options') + self.fsetVal('context-info', 'trace_options') + self.fsetVal('graph-time', 'trace_options') + self.fsetVal('%d' % self.max_graph_depth, 'max_graph_depth') + cf = ['dpm_run_callback'] + if(self.usetraceevents): + cf += ['dpm_prepare', 'dpm_complete'] + for fn in self.tracefuncs: + if 'func' in self.tracefuncs[fn]: + cf.append(self.tracefuncs[fn]['func']) + else: + cf.append(fn) + if self.ftop: + self.setFtraceFilterFunctions([self.ftopfunc]) + else: + self.setFtraceFilterFunctions(cf) + # initialize the kprobe trace + elif self.usekprobes: + for name in self.tracefuncs: + self.defaultKprobe(name, self.tracefuncs[name]) + if self.usedevsrc: + for name in self.dev_tracefuncs: + self.defaultKprobe(name, self.dev_tracefuncs[name]) + if not quiet: + pprint('INITIALIZING KPROBES...') + self.addKprobes(self.verbose) + if(self.usetraceevents): + # turn trace events on + events = iter(self.traceevents) + for e in events: + self.fsetVal('1', 'events/power/'+e+'/enable') + # clear the trace buffer + self.fsetVal('', 'trace') + def verifyFtrace(self): + # files needed for any trace data + files = ['buffer_size_kb', 'current_tracer', 'trace', 'trace_clock', + 'trace_marker', 'trace_options', 'tracing_on'] + # files needed for callgraph trace data + tp = self.tpath + if(self.usecallgraph): + files += [ + 'available_filter_functions', + 'set_ftrace_filter', + 'set_graph_function' + ] + for f in files: + if(os.path.exists(tp+f) == False): + return False + return True + def verifyKprobes(self): + # files needed for kprobes to work + files = ['kprobe_events', 'events'] + tp = self.tpath + for f in files: + if(os.path.exists(tp+f) == False): + return False + return True + def colorText(self, str, color=31): + if not self.ansi: + return str + return '\x1B[%d;40m%s\x1B[m' % (color, str) + def writeDatafileHeader(self, filename, testdata): + fp = self.openlog(filename, 'w') + fp.write('%s\n%s\n# command | %s\n' % (self.teststamp, self.sysstamp, self.cmdline)) + for test in testdata: + if 'fw' in test: + fw = test['fw'] + if(fw): + fp.write('# fwsuspend %u fwresume %u\n' % (fw[0], fw[1])) + if 'turbo' in test: + fp.write('# turbostat %s\n' % test['turbo']) + if 'wifi' in test: + fp.write('# wifi %s\n' % test['wifi']) + if test['error'] or len(testdata) > 1: + fp.write('# enter_sleep_error %s\n' % test['error']) + return fp + def sudoUserchown(self, dir): + if os.path.exists(dir) and self.sudouser: + cmd = 'chown -R {0}:{0} {1} > /dev/null 2>&1' + call(cmd.format(self.sudouser, dir), shell=True) + def outputResult(self, testdata, num=0): + if not self.result: + return + n = '' + if num > 0: + n = '%d' % num + fp = open(self.result, 'a') + if 'error' in testdata: + fp.write('result%s: fail\n' % n) + fp.write('error%s: %s\n' % (n, testdata['error'])) + else: + fp.write('result%s: pass\n' % n) + for v in ['suspend', 'resume', 'boot', 'lastinit']: + if v in testdata: + fp.write('%s%s: %.3f\n' % (v, n, testdata[v])) + for v in ['fwsuspend', 'fwresume']: + if v in testdata: + fp.write('%s%s: %.3f\n' % (v, n, testdata[v] / 1000000.0)) + if 'bugurl' in testdata: + fp.write('url%s: %s\n' % (n, testdata['bugurl'])) + fp.close() + self.sudoUserchown(self.result) + def configFile(self, file): + dir = os.path.dirname(os.path.realpath(__file__)) + if os.path.exists(file): + return file + elif os.path.exists(dir+'/'+file): + return dir+'/'+file + elif os.path.exists(dir+'/config/'+file): + return dir+'/config/'+file + return '' + def openlog(self, filename, mode): + isgz = self.gzip + if mode == 'r': + try: + with gzip.open(filename, mode+'t') as fp: + test = fp.read(64) + isgz = True + except: + isgz = False + if isgz: + return gzip.open(filename, mode+'t') + return open(filename, mode) + def b64unzip(self, data): + try: + out = codecs.decode(base64.b64decode(data), 'zlib').decode() + except: + out = data + return out + def b64zip(self, data): + out = base64.b64encode(codecs.encode(data.encode(), 'zlib')).decode() + return out + def platforminfo(self, cmdafter): + # add platform info on to a completed ftrace file + if not os.path.exists(self.ftracefile): + return False + footer = '#\n' + + # add test command string line if need be + if self.suspendmode == 'command' and self.testcommand: + footer += '# platform-testcmd: %s\n' % (self.testcommand) + + # get a list of target devices from the ftrace file + props = dict() + tp = TestProps() + tf = self.openlog(self.ftracefile, 'r') + for line in tf: + if tp.stampInfo(line, self): + continue + # parse only valid lines, if this is not one move on + m = re.match(tp.ftrace_line_fmt, line) + if(not m or 'device_pm_callback_start' not in line): + continue + m = re.match('.*: (?P<drv>.*) (?P<d>.*), parent: *(?P<p>.*), .*', m.group('msg')); + if(not m): + continue + dev = m.group('d') + if dev not in props: + props[dev] = DevProps() + tf.close() + + # now get the syspath for each target device + for dirname, dirnames, filenames in os.walk('/sys/devices'): + if(re.match('.*/power', dirname) and 'async' in filenames): + dev = dirname.split('/')[-2] + if dev in props and (not props[dev].syspath or len(dirname) < len(props[dev].syspath)): + props[dev].syspath = dirname[:-6] + + # now fill in the properties for our target devices + for dev in sorted(props): + dirname = props[dev].syspath + if not dirname or not os.path.exists(dirname): + continue + with open(dirname+'/power/async') as fp: + text = fp.read() + props[dev].isasync = False + if 'enabled' in text: + props[dev].isasync = True + fields = os.listdir(dirname) + if 'product' in fields: + with open(dirname+'/product', 'rb') as fp: + props[dev].altname = ascii(fp.read()) + elif 'name' in fields: + with open(dirname+'/name', 'rb') as fp: + props[dev].altname = ascii(fp.read()) + elif 'model' in fields: + with open(dirname+'/model', 'rb') as fp: + props[dev].altname = ascii(fp.read()) + elif 'description' in fields: + with open(dirname+'/description', 'rb') as fp: + props[dev].altname = ascii(fp.read()) + elif 'id' in fields: + with open(dirname+'/id', 'rb') as fp: + props[dev].altname = ascii(fp.read()) + elif 'idVendor' in fields and 'idProduct' in fields: + idv, idp = '', '' + with open(dirname+'/idVendor', 'rb') as fp: + idv = ascii(fp.read()).strip() + with open(dirname+'/idProduct', 'rb') as fp: + idp = ascii(fp.read()).strip() + props[dev].altname = '%s:%s' % (idv, idp) + if props[dev].altname: + out = props[dev].altname.strip().replace('\n', ' ')\ + .replace(',', ' ').replace(';', ' ') + props[dev].altname = out + + # add a devinfo line to the bottom of ftrace + out = '' + for dev in sorted(props): + out += props[dev].out(dev) + footer += '# platform-devinfo: %s\n' % self.b64zip(out) + + # add a line for each of these commands with their outputs + for name, cmdline, info in cmdafter: + footer += '# platform-%s: %s | %s\n' % (name, cmdline, self.b64zip(info)) + + with self.openlog(self.ftracefile, 'a') as fp: + fp.write(footer) + return True + def commonPrefix(self, list): + if len(list) < 2: + return '' + prefix = list[0] + for s in list[1:]: + while s[:len(prefix)] != prefix and prefix: + prefix = prefix[:len(prefix)-1] + if not prefix: + break + if '/' in prefix and prefix[-1] != '/': + prefix = prefix[0:prefix.rfind('/')+1] + return prefix + def dictify(self, text, format): + out = dict() + header = True if format == 1 else False + delim = ' ' if format == 1 else ':' + for line in text.split('\n'): + if header: + header, out['@'] = False, line + continue + line = line.strip() + if delim in line: + data = line.split(delim, 1) + num = re.search(r'[\d]+', data[1]) + if format == 2 and num: + out[data[0].strip()] = num.group() + else: + out[data[0].strip()] = data[1] + return out + def cmdinfo(self, begin, debug=False): + out = [] + if begin: + self.cmd1 = dict() + for cargs in self.infocmds: + delta, name = cargs[0], cargs[1] + cmdline, cmdpath = ' '.join(cargs[2:]), self.getExec(cargs[2]) + if not cmdpath or (begin and not delta): + continue + try: + fp = Popen([cmdpath]+cargs[3:], stdout=PIPE, stderr=PIPE).stdout + info = ascii(fp.read()).strip() + fp.close() + except: + continue + if not debug and begin: + self.cmd1[name] = self.dictify(info, delta) + elif not debug and delta and name in self.cmd1: + before, after = self.cmd1[name], self.dictify(info, delta) + dinfo = ('\t%s\n' % before['@']) if '@' in before else '' + prefix = self.commonPrefix(list(before.keys())) + for key in sorted(before): + if key in after and before[key] != after[key]: + title = key.replace(prefix, '') + if delta == 2: + dinfo += '\t%s : %s -> %s\n' % \ + (title, before[key].strip(), after[key].strip()) + else: + dinfo += '%10s (start) : %s\n%10s (after) : %s\n' % \ + (title, before[key], title, after[key]) + dinfo = '\tnothing changed' if not dinfo else dinfo.rstrip() + out.append((name, cmdline, dinfo)) + else: + out.append((name, cmdline, '\tnothing' if not info else info)) + return out + def haveTurbostat(self): + if not self.tstat: + return False + cmd = self.getExec('turbostat') + if not cmd: + return False + fp = Popen([cmd, '-v'], stdout=PIPE, stderr=PIPE).stderr + out = ascii(fp.read()).strip() + fp.close() + if re.match('turbostat version .*', out): + self.vprint(out) + return True + return False + def turbostat(self): + cmd = self.getExec('turbostat') + rawout = keyline = valline = '' + fullcmd = '%s -q -S echo freeze > %s' % (cmd, self.powerfile) + fp = Popen(['sh', '-c', fullcmd], stdout=PIPE, stderr=PIPE).stderr + for line in fp: + line = ascii(line) + rawout += line + if keyline and valline: + continue + if re.match('(?i)Avg_MHz.*', line): + keyline = line.strip().split() + elif keyline: + valline = line.strip().split() + fp.close() + if not keyline or not valline or len(keyline) != len(valline): + errmsg = 'unrecognized turbostat output:\n'+rawout.strip() + self.vprint(errmsg) + if not self.verbose: + pprint(errmsg) + return '' + if self.verbose: + pprint(rawout.strip()) + out = [] + for key in keyline: + idx = keyline.index(key) + val = valline[idx] + out.append('%s=%s' % (key, val)) + return '|'.join(out) + def wifiDetails(self, dev): + try: + info = open('/sys/class/net/%s/device/uevent' % dev, 'r').read().strip() + except: + return dev + vals = [dev] + for prop in info.split('\n'): + if prop.startswith('DRIVER=') or prop.startswith('PCI_ID='): + vals.append(prop.split('=')[-1]) + return ':'.join(vals) + def checkWifi(self, dev=''): + try: + w = open('/proc/net/wireless', 'r').read().strip() + except: + return '' + for line in reversed(w.split('\n')): + m = re.match(' *(?P<dev>.*): (?P<stat>[0-9a-f]*) .*', w.split('\n')[-1]) + if not m or (dev and dev != m.group('dev')): + continue + return m.group('dev') + return '' + def pollWifi(self, dev, timeout=60): + start = time.time() + while (time.time() - start) < timeout: + w = self.checkWifi(dev) + if w: + return '%s reconnected %.2f' % \ + (self.wifiDetails(dev), max(0, time.time() - start)) + time.sleep(0.01) + return '%s timeout %d' % (self.wifiDetails(dev), timeout) + def errorSummary(self, errinfo, msg): + found = False + for entry in errinfo: + if re.match(entry['match'], msg): + entry['count'] += 1 + if self.hostname not in entry['urls']: + entry['urls'][self.hostname] = [self.htmlfile] + elif self.htmlfile not in entry['urls'][self.hostname]: + entry['urls'][self.hostname].append(self.htmlfile) + found = True + break + if found: + return + arr = msg.split() + for j in range(len(arr)): + if re.match('^[0-9,\-\.]*$', arr[j]): + arr[j] = '[0-9,\-\.]*' + else: + arr[j] = arr[j]\ + .replace('\\', '\\\\').replace(']', '\]').replace('[', '\[')\ + .replace('.', '\.').replace('+', '\+').replace('*', '\*')\ + .replace('(', '\(').replace(')', '\)').replace('}', '\}')\ + .replace('{', '\{') + mstr = ' *'.join(arr) + entry = { + 'line': msg, + 'match': mstr, + 'count': 1, + 'urls': {self.hostname: [self.htmlfile]} + } + errinfo.append(entry) + def multistat(self, start, idx, finish): + if 'time' in self.multitest: + id = '%d Duration=%dmin' % (idx+1, self.multitest['time']) + else: + id = '%d/%d' % (idx+1, self.multitest['count']) + t = time.time() + if 'start' not in self.multitest: + self.multitest['start'] = self.multitest['last'] = t + self.multitest['total'] = 0.0 + pprint('TEST (%s) START' % id) + return + dt = t - self.multitest['last'] + if not start: + if idx == 0 and self.multitest['delay'] > 0: + self.multitest['total'] += self.multitest['delay'] + pprint('TEST (%s) COMPLETE -- Duration %.1fs' % (id, dt)) + return + self.multitest['total'] += dt + self.multitest['last'] = t + avg = self.multitest['total'] / idx + if 'time' in self.multitest: + left = finish - datetime.now() + left -= timedelta(microseconds=left.microseconds) + else: + left = timedelta(seconds=((self.multitest['count'] - idx) * int(avg))) + pprint('TEST (%s) START - Avg Duration %.1fs, Time left %s' % \ + (id, avg, str(left))) + def multiinit(self, c, d): + sz, unit = 'count', 'm' + if c.endswith('d') or c.endswith('h') or c.endswith('m'): + sz, unit, c = 'time', c[-1], c[:-1] + self.multitest['run'] = True + self.multitest[sz] = getArgInt('multi: n d (exec count)', c, 1, 1000000, False) + self.multitest['delay'] = getArgInt('multi: n d (delay between tests)', d, 0, 3600, False) + if unit == 'd': + self.multitest[sz] *= 1440 + elif unit == 'h': + self.multitest[sz] *= 60 + +sysvals = SystemValues() +switchvalues = ['enable', 'disable', 'on', 'off', 'true', 'false', '1', '0'] +switchoff = ['disable', 'off', 'false', '0'] +suspendmodename = { + 'freeze': 'Freeze (S0)', + 'standby': 'Standby (S1)', + 'mem': 'Suspend (S3)', + 'disk': 'Hibernate (S4)' +} + +# Class: DevProps +# Description: +# Simple class which holds property values collected +# for all the devices used in the timeline. +class DevProps: + def __init__(self): + self.syspath = '' + self.altname = '' + self.isasync = True + self.xtraclass = '' + self.xtrainfo = '' + def out(self, dev): + return '%s,%s,%d;' % (dev, self.altname, self.isasync) + def debug(self, dev): + pprint('%s:\n\taltname = %s\n\t async = %s' % (dev, self.altname, self.isasync)) + def altName(self, dev): + if not self.altname or self.altname == dev: + return dev + return '%s [%s]' % (self.altname, dev) + def xtraClass(self): + if self.xtraclass: + return ' '+self.xtraclass + if not self.isasync: + return ' sync' + return '' + def xtraInfo(self): + if self.xtraclass: + return ' '+self.xtraclass + if self.isasync: + return ' (async)' + return ' (sync)' + +# Class: DeviceNode +# Description: +# A container used to create a device hierachy, with a single root node +# and a tree of child nodes. Used by Data.deviceTopology() +class DeviceNode: + def __init__(self, nodename, nodedepth): + self.name = nodename + self.children = [] + self.depth = nodedepth + +# Class: Data +# Description: +# The primary container for suspend/resume test data. There is one for +# each test run. The data is organized into a cronological hierarchy: +# Data.dmesg { +# phases { +# 10 sequential, non-overlapping phases of S/R +# contents: times for phase start/end, order/color data for html +# devlist { +# device callback or action list for this phase +# device { +# a single device callback or generic action +# contents: start/stop times, pid/cpu/driver info +# parents/children, html id for timeline/callgraph +# optionally includes an ftrace callgraph +# optionally includes dev/ps data +# } +# } +# } +# } +# +class Data: + phasedef = { + 'suspend_prepare': {'order': 0, 'color': '#CCFFCC'}, + 'suspend': {'order': 1, 'color': '#88FF88'}, + 'suspend_late': {'order': 2, 'color': '#00AA00'}, + 'suspend_noirq': {'order': 3, 'color': '#008888'}, + 'suspend_machine': {'order': 4, 'color': '#0000FF'}, + 'resume_machine': {'order': 5, 'color': '#FF0000'}, + 'resume_noirq': {'order': 6, 'color': '#FF9900'}, + 'resume_early': {'order': 7, 'color': '#FFCC00'}, + 'resume': {'order': 8, 'color': '#FFFF88'}, + 'resume_complete': {'order': 9, 'color': '#FFFFCC'}, + } + errlist = { + 'HWERROR' : r'.*\[ *Hardware Error *\].*', + 'FWBUG' : r'.*\[ *Firmware Bug *\].*', + 'BUG' : r'(?i).*\bBUG\b.*', + 'ERROR' : r'(?i).*\bERROR\b.*', + 'WARNING' : r'(?i).*\bWARNING\b.*', + 'FAULT' : r'(?i).*\bFAULT\b.*', + 'FAIL' : r'(?i).*\bFAILED\b.*', + 'INVALID' : r'(?i).*\bINVALID\b.*', + 'CRASH' : r'(?i).*\bCRASHED\b.*', + 'TIMEOUT' : r'(?i).*\bTIMEOUT\b.*', + 'IRQ' : r'.*\bgenirq: .*', + 'TASKFAIL': r'.*Freezing of tasks *.*', + 'ACPI' : r'.*\bACPI *(?P<b>[A-Za-z]*) *Error[: ].*', + 'DISKFULL': r'.*\bNo space left on device.*', + 'USBERR' : r'.*usb .*device .*, error [0-9-]*', + 'ATAERR' : r' *ata[0-9\.]*: .*failed.*', + 'MEIERR' : r' *mei.*: .*failed.*', + 'TPMERR' : r'(?i) *tpm *tpm[0-9]*: .*error.*', + } + def __init__(self, num): + idchar = 'abcdefghij' + self.start = 0.0 # test start + self.end = 0.0 # test end + self.hwstart = 0 # rtc test start + self.hwend = 0 # rtc test end + self.tSuspended = 0.0 # low-level suspend start + self.tResumed = 0.0 # low-level resume start + self.tKernSus = 0.0 # kernel level suspend start + self.tKernRes = 0.0 # kernel level resume end + self.fwValid = False # is firmware data available + self.fwSuspend = 0 # time spent in firmware suspend + self.fwResume = 0 # time spent in firmware resume + self.html_device_id = 0 + self.stamp = 0 + self.outfile = '' + self.kerror = False + self.wifi = dict() + self.turbostat = 0 + self.enterfail = '' + self.currphase = '' + self.pstl = dict() # process timeline + self.testnumber = num + self.idstr = idchar[num] + self.dmesgtext = [] # dmesg text file in memory + self.dmesg = dict() # root data structure + self.errorinfo = {'suspend':[],'resume':[]} + self.tLow = [] # time spent in low-level suspends (standby/freeze) + self.devpids = [] + self.devicegroups = 0 + def sortedPhases(self): + return sorted(self.dmesg, key=lambda k:self.dmesg[k]['order']) + def initDevicegroups(self): + # called when phases are all finished being added + for phase in sorted(self.dmesg.keys()): + if '*' in phase: + p = phase.split('*') + pnew = '%s%d' % (p[0], len(p)) + self.dmesg[pnew] = self.dmesg.pop(phase) + self.devicegroups = [] + for phase in self.sortedPhases(): + self.devicegroups.append([phase]) + def nextPhase(self, phase, offset): + order = self.dmesg[phase]['order'] + offset + for p in self.dmesg: + if self.dmesg[p]['order'] == order: + return p + return '' + def lastPhase(self, depth=1): + plist = self.sortedPhases() + if len(plist) < depth: + return '' + return plist[-1*depth] + def turbostatInfo(self): + tp = TestProps() + out = {'syslpi':'N/A','pkgpc10':'N/A'} + for line in self.dmesgtext: + m = re.match(tp.tstatfmt, line) + if not m: + continue + for i in m.group('t').split('|'): + if 'SYS%LPI' in i: + out['syslpi'] = i.split('=')[-1]+'%' + elif 'pc10' in i: + out['pkgpc10'] = i.split('=')[-1]+'%' + break + return out + def extractErrorInfo(self): + lf = self.dmesgtext + if len(self.dmesgtext) < 1 and sysvals.dmesgfile: + lf = sysvals.openlog(sysvals.dmesgfile, 'r') + i = 0 + tp = TestProps() + list = [] + for line in lf: + i += 1 + if tp.stampInfo(line, sysvals): + continue + m = re.match('[ \t]*(\[ *)(?P<ktime>[0-9\.]*)(\]) (?P<msg>.*)', line) + if not m: + continue + t = float(m.group('ktime')) + if t < self.start or t > self.end: + continue + dir = 'suspend' if t < self.tSuspended else 'resume' + msg = m.group('msg') + if re.match('capability: warning: .*', msg): + continue + for err in self.errlist: + if re.match(self.errlist[err], msg): + list.append((msg, err, dir, t, i, i)) + self.kerror = True + break + tp.msglist = [] + for msg, type, dir, t, idx1, idx2 in list: + tp.msglist.append(msg) + self.errorinfo[dir].append((type, t, idx1, idx2)) + if self.kerror: + sysvals.dmesglog = True + if len(self.dmesgtext) < 1 and sysvals.dmesgfile: + lf.close() + return tp + def setStart(self, time, msg=''): + self.start = time + if msg: + try: + self.hwstart = datetime.strptime(msg, sysvals.tmstart) + except: + self.hwstart = 0 + def setEnd(self, time, msg=''): + self.end = time + if msg: + try: + self.hwend = datetime.strptime(msg, sysvals.tmend) + except: + self.hwend = 0 + def isTraceEventOutsideDeviceCalls(self, pid, time): + for phase in self.sortedPhases(): + list = self.dmesg[phase]['list'] + for dev in list: + d = list[dev] + if(d['pid'] == pid and time >= d['start'] and + time < d['end']): + return False + return True + def sourcePhase(self, start): + for phase in self.sortedPhases(): + if 'machine' in phase: + continue + pend = self.dmesg[phase]['end'] + if start <= pend: + return phase + return 'resume_complete' + def sourceDevice(self, phaselist, start, end, pid, type): + tgtdev = '' + for phase in phaselist: + list = self.dmesg[phase]['list'] + for devname in list: + dev = list[devname] + # pid must match + if dev['pid'] != pid: + continue + devS = dev['start'] + devE = dev['end'] + if type == 'device': + # device target event is entirely inside the source boundary + if(start < devS or start >= devE or end <= devS or end > devE): + continue + elif type == 'thread': + # thread target event will expand the source boundary + if start < devS: + dev['start'] = start + if end > devE: + dev['end'] = end + tgtdev = dev + break + return tgtdev + def addDeviceFunctionCall(self, displayname, kprobename, proc, pid, start, end, cdata, rdata): + # try to place the call in a device + phases = self.sortedPhases() + tgtdev = self.sourceDevice(phases, start, end, pid, 'device') + # calls with device pids that occur outside device bounds are dropped + # TODO: include these somehow + if not tgtdev and pid in self.devpids: + return False + # try to place the call in a thread + if not tgtdev: + tgtdev = self.sourceDevice(phases, start, end, pid, 'thread') + # create new thread blocks, expand as new calls are found + if not tgtdev: + if proc == '<...>': + threadname = 'kthread-%d' % (pid) + else: + threadname = '%s-%d' % (proc, pid) + tgtphase = self.sourcePhase(start) + self.newAction(tgtphase, threadname, pid, '', start, end, '', ' kth', '') + return self.addDeviceFunctionCall(displayname, kprobename, proc, pid, start, end, cdata, rdata) + # this should not happen + if not tgtdev: + sysvals.vprint('[%f - %f] %s-%d %s %s %s' % \ + (start, end, proc, pid, kprobename, cdata, rdata)) + return False + # place the call data inside the src element of the tgtdev + if('src' not in tgtdev): + tgtdev['src'] = [] + dtf = sysvals.dev_tracefuncs + ubiquitous = False + if kprobename in dtf and 'ub' in dtf[kprobename]: + ubiquitous = True + title = cdata+' '+rdata + mstr = '\(.*\) *(?P<args>.*) *\((?P<caller>.*)\+.* arg1=(?P<ret>.*)' + m = re.match(mstr, title) + if m: + c = m.group('caller') + a = m.group('args').strip() + r = m.group('ret') + if len(r) > 6: + r = '' + else: + r = 'ret=%s ' % r + if ubiquitous and c in dtf and 'ub' in dtf[c]: + return False + color = sysvals.kprobeColor(kprobename) + e = DevFunction(displayname, a, c, r, start, end, ubiquitous, proc, pid, color) + tgtdev['src'].append(e) + return True + def overflowDevices(self): + # get a list of devices that extend beyond the end of this test run + devlist = [] + for phase in self.sortedPhases(): + list = self.dmesg[phase]['list'] + for devname in list: + dev = list[devname] + if dev['end'] > self.end: + devlist.append(dev) + return devlist + def mergeOverlapDevices(self, devlist): + # merge any devices that overlap devlist + for dev in devlist: + devname = dev['name'] + for phase in self.sortedPhases(): + list = self.dmesg[phase]['list'] + if devname not in list: + continue + tdev = list[devname] + o = min(dev['end'], tdev['end']) - max(dev['start'], tdev['start']) + if o <= 0: + continue + dev['end'] = tdev['end'] + if 'src' not in dev or 'src' not in tdev: + continue + dev['src'] += tdev['src'] + del list[devname] + def usurpTouchingThread(self, name, dev): + # the caller test has priority of this thread, give it to him + for phase in self.sortedPhases(): + list = self.dmesg[phase]['list'] + if name in list: + tdev = list[name] + if tdev['start'] - dev['end'] < 0.1: + dev['end'] = tdev['end'] + if 'src' not in dev: + dev['src'] = [] + if 'src' in tdev: + dev['src'] += tdev['src'] + del list[name] + break + def stitchTouchingThreads(self, testlist): + # merge any threads between tests that touch + for phase in self.sortedPhases(): + list = self.dmesg[phase]['list'] + for devname in list: + dev = list[devname] + if 'htmlclass' not in dev or 'kth' not in dev['htmlclass']: + continue + for data in testlist: + data.usurpTouchingThread(devname, dev) + def optimizeDevSrc(self): + # merge any src call loops to reduce timeline size + for phase in self.sortedPhases(): + list = self.dmesg[phase]['list'] + for dev in list: + if 'src' not in list[dev]: + continue + src = list[dev]['src'] + p = 0 + for e in sorted(src, key=lambda event: event.time): + if not p or not e.repeat(p): + p = e + continue + # e is another iteration of p, move it into p + p.end = e.end + p.length = p.end - p.time + p.count += 1 + src.remove(e) + def trimTimeVal(self, t, t0, dT, left): + if left: + if(t > t0): + if(t - dT < t0): + return t0 + return t - dT + else: + return t + else: + if(t < t0 + dT): + if(t > t0): + return t0 + dT + return t + dT + else: + return t + def trimTime(self, t0, dT, left): + self.tSuspended = self.trimTimeVal(self.tSuspended, t0, dT, left) + self.tResumed = self.trimTimeVal(self.tResumed, t0, dT, left) + self.start = self.trimTimeVal(self.start, t0, dT, left) + self.tKernSus = self.trimTimeVal(self.tKernSus, t0, dT, left) + self.tKernRes = self.trimTimeVal(self.tKernRes, t0, dT, left) + self.end = self.trimTimeVal(self.end, t0, dT, left) + for phase in self.sortedPhases(): + p = self.dmesg[phase] + p['start'] = self.trimTimeVal(p['start'], t0, dT, left) + p['end'] = self.trimTimeVal(p['end'], t0, dT, left) + list = p['list'] + for name in list: + d = list[name] + d['start'] = self.trimTimeVal(d['start'], t0, dT, left) + d['end'] = self.trimTimeVal(d['end'], t0, dT, left) + d['length'] = d['end'] - d['start'] + if('ftrace' in d): + cg = d['ftrace'] + cg.start = self.trimTimeVal(cg.start, t0, dT, left) + cg.end = self.trimTimeVal(cg.end, t0, dT, left) + for line in cg.list: + line.time = self.trimTimeVal(line.time, t0, dT, left) + if('src' in d): + for e in d['src']: + e.time = self.trimTimeVal(e.time, t0, dT, left) + e.end = self.trimTimeVal(e.end, t0, dT, left) + e.length = e.end - e.time + for dir in ['suspend', 'resume']: + list = [] + for e in self.errorinfo[dir]: + type, tm, idx1, idx2 = e + tm = self.trimTimeVal(tm, t0, dT, left) + list.append((type, tm, idx1, idx2)) + self.errorinfo[dir] = list + def trimFreezeTime(self, tZero): + # trim out any standby or freeze clock time + lp = '' + for phase in self.sortedPhases(): + if 'resume_machine' in phase and 'suspend_machine' in lp: + tS, tR = self.dmesg[lp]['end'], self.dmesg[phase]['start'] + tL = tR - tS + if tL > 0: + left = True if tR > tZero else False + self.trimTime(tS, tL, left) + if 'trying' in self.dmesg[lp] and self.dmesg[lp]['trying'] >= 0.001: + tTry = round(self.dmesg[lp]['trying'] * 1000) + text = '%.0f (-%.0f waking)' % (tL * 1000, tTry) + else: + text = '%.0f' % (tL * 1000) + self.tLow.append(text) + lp = phase + def getMemTime(self): + if not self.hwstart or not self.hwend: + return + stime = (self.tSuspended - self.start) * 1000000 + rtime = (self.end - self.tResumed) * 1000000 + hws = self.hwstart + timedelta(microseconds=stime) + hwr = self.hwend - timedelta(microseconds=rtime) + self.tLow.append('%.0f'%((hwr - hws).total_seconds() * 1000)) + def getTimeValues(self): + sktime = (self.tSuspended - self.tKernSus) * 1000 + rktime = (self.tKernRes - self.tResumed) * 1000 + return (sktime, rktime) + def setPhase(self, phase, ktime, isbegin, order=-1): + if(isbegin): + # phase start over current phase + if self.currphase: + if 'resume_machine' not in self.currphase: + sysvals.vprint('WARNING: phase %s failed to end' % self.currphase) + self.dmesg[self.currphase]['end'] = ktime + phases = self.dmesg.keys() + color = self.phasedef[phase]['color'] + count = len(phases) if order < 0 else order + # create unique name for every new phase + while phase in phases: + phase += '*' + self.dmesg[phase] = {'list': dict(), 'start': -1.0, 'end': -1.0, + 'row': 0, 'color': color, 'order': count} + self.dmesg[phase]['start'] = ktime + self.currphase = phase + else: + # phase end without a start + if phase not in self.currphase: + if self.currphase: + sysvals.vprint('WARNING: %s ended instead of %s, ftrace corruption?' % (phase, self.currphase)) + else: + sysvals.vprint('WARNING: %s ended without a start, ftrace corruption?' % phase) + return phase + phase = self.currphase + self.dmesg[phase]['end'] = ktime + self.currphase = '' + return phase + def sortedDevices(self, phase): + list = self.dmesg[phase]['list'] + return sorted(list, key=lambda k:list[k]['start']) + def fixupInitcalls(self, phase): + # if any calls never returned, clip them at system resume end + phaselist = self.dmesg[phase]['list'] + for devname in phaselist: + dev = phaselist[devname] + if(dev['end'] < 0): + for p in self.sortedPhases(): + if self.dmesg[p]['end'] > dev['start']: + dev['end'] = self.dmesg[p]['end'] + break + sysvals.vprint('%s (%s): callback didnt return' % (devname, phase)) + def deviceFilter(self, devicefilter): + for phase in self.sortedPhases(): + list = self.dmesg[phase]['list'] + rmlist = [] + for name in list: + keep = False + for filter in devicefilter: + if filter in name or \ + ('drv' in list[name] and filter in list[name]['drv']): + keep = True + if not keep: + rmlist.append(name) + for name in rmlist: + del list[name] + def fixupInitcallsThatDidntReturn(self): + # if any calls never returned, clip them at system resume end + for phase in self.sortedPhases(): + self.fixupInitcalls(phase) + def phaseOverlap(self, phases): + rmgroups = [] + newgroup = [] + for group in self.devicegroups: + for phase in phases: + if phase not in group: + continue + for p in group: + if p not in newgroup: + newgroup.append(p) + if group not in rmgroups: + rmgroups.append(group) + for group in rmgroups: + self.devicegroups.remove(group) + self.devicegroups.append(newgroup) + def newActionGlobal(self, name, start, end, pid=-1, color=''): + # which phase is this device callback or action in + phases = self.sortedPhases() + targetphase = 'none' + htmlclass = '' + overlap = 0.0 + myphases = [] + for phase in phases: + pstart = self.dmesg[phase]['start'] + pend = self.dmesg[phase]['end'] + # see if the action overlaps this phase + o = max(0, min(end, pend) - max(start, pstart)) + if o > 0: + myphases.append(phase) + # set the target phase to the one that overlaps most + if o > overlap: + if overlap > 0 and phase == 'post_resume': + continue + targetphase = phase + overlap = o + # if no target phase was found, pin it to the edge + if targetphase == 'none': + p0start = self.dmesg[phases[0]]['start'] + if start <= p0start: + targetphase = phases[0] + else: + targetphase = phases[-1] + if pid == -2: + htmlclass = ' bg' + elif pid == -3: + htmlclass = ' ps' + if len(myphases) > 1: + htmlclass = ' bg' + self.phaseOverlap(myphases) + if targetphase in phases: + newname = self.newAction(targetphase, name, pid, '', start, end, '', htmlclass, color) + return (targetphase, newname) + return False + def newAction(self, phase, name, pid, parent, start, end, drv, htmlclass='', color=''): + # new device callback for a specific phase + self.html_device_id += 1 + devid = '%s%d' % (self.idstr, self.html_device_id) + list = self.dmesg[phase]['list'] + length = -1.0 + if(start >= 0 and end >= 0): + length = end - start + if pid == -2 or name not in sysvals.tracefuncs.keys(): + i = 2 + origname = name + while(name in list): + name = '%s[%d]' % (origname, i) + i += 1 + list[name] = {'name': name, 'start': start, 'end': end, 'pid': pid, + 'par': parent, 'length': length, 'row': 0, 'id': devid, 'drv': drv } + if htmlclass: + list[name]['htmlclass'] = htmlclass + if color: + list[name]['color'] = color + return name + def findDevice(self, phase, name): + list = self.dmesg[phase]['list'] + mydev = '' + for devname in sorted(list): + if name == devname or re.match('^%s\[(?P<num>[0-9]*)\]$' % name, devname): + mydev = devname + if mydev: + return list[mydev] + return False + def deviceChildren(self, devname, phase): + devlist = [] + list = self.dmesg[phase]['list'] + for child in list: + if(list[child]['par'] == devname): + devlist.append(child) + return devlist + def maxDeviceNameSize(self, phase): + size = 0 + for name in self.dmesg[phase]['list']: + if len(name) > size: + size = len(name) + return size + def printDetails(self): + sysvals.vprint('Timeline Details:') + sysvals.vprint(' test start: %f' % self.start) + sysvals.vprint('kernel suspend start: %f' % self.tKernSus) + tS = tR = False + for phase in self.sortedPhases(): + devlist = self.dmesg[phase]['list'] + dc, ps, pe = len(devlist), self.dmesg[phase]['start'], self.dmesg[phase]['end'] + if not tS and ps >= self.tSuspended: + sysvals.vprint(' machine suspended: %f' % self.tSuspended) + tS = True + if not tR and ps >= self.tResumed: + sysvals.vprint(' machine resumed: %f' % self.tResumed) + tR = True + sysvals.vprint('%20s: %f - %f (%d devices)' % (phase, ps, pe, dc)) + if sysvals.devdump: + sysvals.vprint(''.join('-' for i in range(80))) + maxname = '%d' % self.maxDeviceNameSize(phase) + fmt = '%3d) %'+maxname+'s - %f - %f' + c = 1 + for name in sorted(devlist): + s = devlist[name]['start'] + e = devlist[name]['end'] + sysvals.vprint(fmt % (c, name, s, e)) + c += 1 + sysvals.vprint(''.join('-' for i in range(80))) + sysvals.vprint(' kernel resume end: %f' % self.tKernRes) + sysvals.vprint(' test end: %f' % self.end) + def deviceChildrenAllPhases(self, devname): + devlist = [] + for phase in self.sortedPhases(): + list = self.deviceChildren(devname, phase) + for dev in sorted(list): + if dev not in devlist: + devlist.append(dev) + return devlist + def masterTopology(self, name, list, depth): + node = DeviceNode(name, depth) + for cname in list: + # avoid recursions + if name == cname: + continue + clist = self.deviceChildrenAllPhases(cname) + cnode = self.masterTopology(cname, clist, depth+1) + node.children.append(cnode) + return node + def printTopology(self, node): + html = '' + if node.name: + info = '' + drv = '' + for phase in self.sortedPhases(): + list = self.dmesg[phase]['list'] + if node.name in list: + s = list[node.name]['start'] + e = list[node.name]['end'] + if list[node.name]['drv']: + drv = ' {'+list[node.name]['drv']+'}' + info += ('<li>%s: %.3fms</li>' % (phase, (e-s)*1000)) + html += '<li><b>'+node.name+drv+'</b>' + if info: + html += '<ul>'+info+'</ul>' + html += '</li>' + if len(node.children) > 0: + html += '<ul>' + for cnode in node.children: + html += self.printTopology(cnode) + html += '</ul>' + return html + def rootDeviceList(self): + # list of devices graphed + real = [] + for phase in self.sortedPhases(): + list = self.dmesg[phase]['list'] + for dev in sorted(list): + if list[dev]['pid'] >= 0 and dev not in real: + real.append(dev) + # list of top-most root devices + rootlist = [] + for phase in self.sortedPhases(): + list = self.dmesg[phase]['list'] + for dev in sorted(list): + pdev = list[dev]['par'] + pid = list[dev]['pid'] + if(pid < 0 or re.match('[0-9]*-[0-9]*\.[0-9]*[\.0-9]*\:[\.0-9]*$', pdev)): + continue + if pdev and pdev not in real and pdev not in rootlist: + rootlist.append(pdev) + return rootlist + def deviceTopology(self): + rootlist = self.rootDeviceList() + master = self.masterTopology('', rootlist, 0) + return self.printTopology(master) + def selectTimelineDevices(self, widfmt, tTotal, mindevlen): + # only select devices that will actually show up in html + self.tdevlist = dict() + for phase in self.dmesg: + devlist = [] + list = self.dmesg[phase]['list'] + for dev in list: + length = (list[dev]['end'] - list[dev]['start']) * 1000 + width = widfmt % (((list[dev]['end']-list[dev]['start'])*100)/tTotal) + if width != '0.000000' and length >= mindevlen: + devlist.append(dev) + self.tdevlist[phase] = devlist + def addHorizontalDivider(self, devname, devend): + phase = 'suspend_prepare' + self.newAction(phase, devname, -2, '', \ + self.start, devend, '', ' sec', '') + if phase not in self.tdevlist: + self.tdevlist[phase] = [] + self.tdevlist[phase].append(devname) + d = DevItem(0, phase, self.dmesg[phase]['list'][devname]) + return d + def addProcessUsageEvent(self, name, times): + # get the start and end times for this process + maxC = 0 + tlast = 0 + start = -1 + end = -1 + for t in sorted(times): + if tlast == 0: + tlast = t + continue + if name in self.pstl[t]: + if start == -1 or tlast < start: + start = tlast + if end == -1 or t > end: + end = t + tlast = t + if start == -1 or end == -1: + return 0 + # add a new action for this process and get the object + out = self.newActionGlobal(name, start, end, -3) + if not out: + return 0 + phase, devname = out + dev = self.dmesg[phase]['list'][devname] + # get the cpu exec data + tlast = 0 + clast = 0 + cpuexec = dict() + for t in sorted(times): + if tlast == 0 or t <= start or t > end: + tlast = t + continue + list = self.pstl[t] + c = 0 + if name in list: + c = list[name] + if c > maxC: + maxC = c + if c != clast: + key = (tlast, t) + cpuexec[key] = c + tlast = t + clast = c + dev['cpuexec'] = cpuexec + return maxC + def createProcessUsageEvents(self): + # get an array of process names + proclist = [] + for t in sorted(self.pstl): + pslist = self.pstl[t] + for ps in sorted(pslist): + if ps not in proclist: + proclist.append(ps) + # get a list of data points for suspend and resume + tsus = [] + tres = [] + for t in sorted(self.pstl): + if t < self.tSuspended: + tsus.append(t) + else: + tres.append(t) + # process the events for suspend and resume + if len(proclist) > 0: + sysvals.vprint('Process Execution:') + for ps in proclist: + c = self.addProcessUsageEvent(ps, tsus) + if c > 0: + sysvals.vprint('%25s (sus): %d' % (ps, c)) + c = self.addProcessUsageEvent(ps, tres) + if c > 0: + sysvals.vprint('%25s (res): %d' % (ps, c)) + def handleEndMarker(self, time, msg=''): + dm = self.dmesg + self.setEnd(time, msg) + self.initDevicegroups() + # give suspend_prepare an end if needed + if 'suspend_prepare' in dm and dm['suspend_prepare']['end'] < 0: + dm['suspend_prepare']['end'] = time + # assume resume machine ends at next phase start + if 'resume_machine' in dm and dm['resume_machine']['end'] < 0: + np = self.nextPhase('resume_machine', 1) + if np: + dm['resume_machine']['end'] = dm[np]['start'] + # if kernel resume end not found, assume its the end marker + if self.tKernRes == 0.0: + self.tKernRes = time + # if kernel suspend start not found, assume its the end marker + if self.tKernSus == 0.0: + self.tKernSus = time + # set resume complete to end at end marker + if 'resume_complete' in dm: + dm['resume_complete']['end'] = time + def debugPrint(self): + for p in self.sortedPhases(): + list = self.dmesg[p]['list'] + for devname in sorted(list): + dev = list[devname] + if 'ftrace' in dev: + dev['ftrace'].debugPrint(' [%s]' % devname) + +# Class: DevFunction +# Description: +# A container for kprobe function data we want in the dev timeline +class DevFunction: + def __init__(self, name, args, caller, ret, start, end, u, proc, pid, color): + self.row = 0 + self.count = 1 + self.name = name + self.args = args + self.caller = caller + self.ret = ret + self.time = start + self.length = end - start + self.end = end + self.ubiquitous = u + self.proc = proc + self.pid = pid + self.color = color + def title(self): + cnt = '' + if self.count > 1: + cnt = '(x%d)' % self.count + l = '%0.3fms' % (self.length * 1000) + if self.ubiquitous: + title = '%s(%s)%s <- %s, %s(%s)' % \ + (self.name, self.args, cnt, self.caller, self.ret, l) + else: + title = '%s(%s) %s%s(%s)' % (self.name, self.args, self.ret, cnt, l) + return title.replace('"', '') + def text(self): + if self.count > 1: + text = '%s(x%d)' % (self.name, self.count) + else: + text = self.name + return text + def repeat(self, tgt): + # is the tgt call just a repeat of this call (e.g. are we in a loop) + dt = self.time - tgt.end + # only combine calls if -all- attributes are identical + if tgt.caller == self.caller and \ + tgt.name == self.name and tgt.args == self.args and \ + tgt.proc == self.proc and tgt.pid == self.pid and \ + tgt.ret == self.ret and dt >= 0 and \ + dt <= sysvals.callloopmaxgap and \ + self.length < sysvals.callloopmaxlen: + return True + return False + +# Class: FTraceLine +# Description: +# A container for a single line of ftrace data. There are six basic types: +# callgraph line: +# call: " dpm_run_callback() {" +# return: " }" +# leaf: " dpm_run_callback();" +# trace event: +# tracing_mark_write: SUSPEND START or RESUME COMPLETE +# suspend_resume: phase or custom exec block data +# device_pm_callback: device callback info +class FTraceLine: + def __init__(self, t, m='', d=''): + self.length = 0.0 + self.fcall = False + self.freturn = False + self.fevent = False + self.fkprobe = False + self.depth = 0 + self.name = '' + self.type = '' + self.time = float(t) + if not m and not d: + return + # is this a trace event + if(d == 'traceevent' or re.match('^ *\/\* *(?P<msg>.*) \*\/ *$', m)): + if(d == 'traceevent'): + # nop format trace event + msg = m + else: + # function_graph format trace event + em = re.match('^ *\/\* *(?P<msg>.*) \*\/ *$', m) + msg = em.group('msg') + + emm = re.match('^(?P<call>.*?): (?P<msg>.*)', msg) + if(emm): + self.name = emm.group('msg') + self.type = emm.group('call') + else: + self.name = msg + km = re.match('^(?P<n>.*)_cal$', self.type) + if km: + self.fcall = True + self.fkprobe = True + self.type = km.group('n') + return + km = re.match('^(?P<n>.*)_ret$', self.type) + if km: + self.freturn = True + self.fkprobe = True + self.type = km.group('n') + return + self.fevent = True + return + # convert the duration to seconds + if(d): + self.length = float(d)/1000000 + # the indentation determines the depth + match = re.match('^(?P<d> *)(?P<o>.*)$', m) + if(not match): + return + self.depth = self.getDepth(match.group('d')) + m = match.group('o') + # function return + if(m[0] == '}'): + self.freturn = True + if(len(m) > 1): + # includes comment with function name + match = re.match('^} *\/\* *(?P<n>.*) *\*\/$', m) + if(match): + self.name = match.group('n').strip() + # function call + else: + self.fcall = True + # function call with children + if(m[-1] == '{'): + match = re.match('^(?P<n>.*) *\(.*', m) + if(match): + self.name = match.group('n').strip() + # function call with no children (leaf) + elif(m[-1] == ';'): + self.freturn = True + match = re.match('^(?P<n>.*) *\(.*', m) + if(match): + self.name = match.group('n').strip() + # something else (possibly a trace marker) + else: + self.name = m + def isCall(self): + return self.fcall and not self.freturn + def isReturn(self): + return self.freturn and not self.fcall + def isLeaf(self): + return self.fcall and self.freturn + def getDepth(self, str): + return len(str)/2 + def debugPrint(self, info=''): + if self.isLeaf(): + pprint(' -- %12.6f (depth=%02d): %s(); (%.3f us) %s' % (self.time, \ + self.depth, self.name, self.length*1000000, info)) + elif self.freturn: + pprint(' -- %12.6f (depth=%02d): %s} (%.3f us) %s' % (self.time, \ + self.depth, self.name, self.length*1000000, info)) + else: + pprint(' -- %12.6f (depth=%02d): %s() { (%.3f us) %s' % (self.time, \ + self.depth, self.name, self.length*1000000, info)) + def startMarker(self): + # Is this the starting line of a suspend? + if not self.fevent: + return False + if sysvals.usetracemarkers: + if(self.name.startswith('SUSPEND START')): + return True + return False + else: + if(self.type == 'suspend_resume' and + re.match('suspend_enter\[.*\] begin', self.name)): + return True + return False + def endMarker(self): + # Is this the ending line of a resume? + if not self.fevent: + return False + if sysvals.usetracemarkers: + if(self.name.startswith('RESUME COMPLETE')): + return True + return False + else: + if(self.type == 'suspend_resume' and + re.match('thaw_processes\[.*\] end', self.name)): + return True + return False + +# Class: FTraceCallGraph +# Description: +# A container for the ftrace callgraph of a single recursive function. +# This can be a dpm_run_callback, dpm_prepare, or dpm_complete callgraph +# Each instance is tied to a single device in a single phase, and is +# comprised of an ordered list of FTraceLine objects +class FTraceCallGraph: + vfname = 'missing_function_name' + def __init__(self, pid, sv): + self.id = '' + self.invalid = False + self.name = '' + self.partial = False + self.ignore = False + self.start = -1.0 + self.end = -1.0 + self.list = [] + self.depth = 0 + self.pid = pid + self.sv = sv + def addLine(self, line): + # if this is already invalid, just leave + if(self.invalid): + if(line.depth == 0 and line.freturn): + return 1 + return 0 + # invalidate on bad depth + if(self.depth < 0): + self.invalidate(line) + return 0 + # ignore data til we return to the current depth + if self.ignore: + if line.depth > self.depth: + return 0 + else: + self.list[-1].freturn = True + self.list[-1].length = line.time - self.list[-1].time + self.ignore = False + # if this is a return at self.depth, no more work is needed + if line.depth == self.depth and line.isReturn(): + if line.depth == 0: + self.end = line.time + return 1 + return 0 + # compare current depth with this lines pre-call depth + prelinedep = line.depth + if line.isReturn(): + prelinedep += 1 + last = 0 + lasttime = line.time + if len(self.list) > 0: + last = self.list[-1] + lasttime = last.time + if last.isLeaf(): + lasttime += last.length + # handle low misalignments by inserting returns + mismatch = prelinedep - self.depth + warning = self.sv.verbose and abs(mismatch) > 1 + info = [] + if mismatch < 0: + idx = 0 + # add return calls to get the depth down + while prelinedep < self.depth: + self.depth -= 1 + if idx == 0 and last and last.isCall(): + # special case, turn last call into a leaf + last.depth = self.depth + last.freturn = True + last.length = line.time - last.time + if warning: + info.append(('[make leaf]', last)) + else: + vline = FTraceLine(lasttime) + vline.depth = self.depth + vline.name = self.vfname + vline.freturn = True + self.list.append(vline) + if warning: + if idx == 0: + info.append(('', last)) + info.append(('[add return]', vline)) + idx += 1 + if warning: + info.append(('', line)) + # handle high misalignments by inserting calls + elif mismatch > 0: + idx = 0 + if warning: + info.append(('', last)) + # add calls to get the depth up + while prelinedep > self.depth: + if idx == 0 and line.isReturn(): + # special case, turn this return into a leaf + line.fcall = True + prelinedep -= 1 + if warning: + info.append(('[make leaf]', line)) + else: + vline = FTraceLine(lasttime) + vline.depth = self.depth + vline.name = self.vfname + vline.fcall = True + self.list.append(vline) + self.depth += 1 + if not last: + self.start = vline.time + if warning: + info.append(('[add call]', vline)) + idx += 1 + if warning and ('[make leaf]', line) not in info: + info.append(('', line)) + if warning: + pprint('WARNING: ftrace data missing, corrections made:') + for i in info: + t, obj = i + if obj: + obj.debugPrint(t) + # process the call and set the new depth + skipadd = False + md = self.sv.max_graph_depth + if line.isCall(): + # ignore blacklisted/overdepth funcs + if (md and self.depth >= md - 1) or (line.name in self.sv.cgblacklist): + self.ignore = True + else: + self.depth += 1 + elif line.isReturn(): + self.depth -= 1 + # remove blacklisted/overdepth/empty funcs that slipped through + if (last and last.isCall() and last.depth == line.depth) or \ + (md and last and last.depth >= md) or \ + (line.name in self.sv.cgblacklist): + while len(self.list) > 0 and self.list[-1].depth > line.depth: + self.list.pop(-1) + if len(self.list) == 0: + self.invalid = True + return 1 + self.list[-1].freturn = True + self.list[-1].length = line.time - self.list[-1].time + self.list[-1].name = line.name + skipadd = True + if len(self.list) < 1: + self.start = line.time + # check for a mismatch that returned all the way to callgraph end + res = 1 + if mismatch < 0 and self.list[-1].depth == 0 and self.list[-1].freturn: + line = self.list[-1] + skipadd = True + res = -1 + if not skipadd: + self.list.append(line) + if(line.depth == 0 and line.freturn): + if(self.start < 0): + self.start = line.time + self.end = line.time + if line.fcall: + self.end += line.length + if self.list[0].name == self.vfname: + self.invalid = True + if res == -1: + self.partial = True + return res + return 0 + def invalidate(self, line): + if(len(self.list) > 0): + first = self.list[0] + self.list = [] + self.list.append(first) + self.invalid = True + id = 'task %s' % (self.pid) + window = '(%f - %f)' % (self.start, line.time) + if(self.depth < 0): + pprint('Data misalignment for '+id+\ + ' (buffer overflow), ignoring this callback') + else: + pprint('Too much data for '+id+\ + ' '+window+', ignoring this callback') + def slice(self, dev): + minicg = FTraceCallGraph(dev['pid'], self.sv) + minicg.name = self.name + mydepth = -1 + good = False + for l in self.list: + if(l.time < dev['start'] or l.time > dev['end']): + continue + if mydepth < 0: + if l.name == 'mutex_lock' and l.freturn: + mydepth = l.depth + continue + elif l.depth == mydepth and l.name == 'mutex_unlock' and l.fcall: + good = True + break + l.depth -= mydepth + minicg.addLine(l) + if not good or len(minicg.list) < 1: + return 0 + return minicg + def repair(self, enddepth): + # bring the depth back to 0 with additional returns + fixed = False + last = self.list[-1] + for i in reversed(range(enddepth)): + t = FTraceLine(last.time) + t.depth = i + t.freturn = True + fixed = self.addLine(t) + if fixed != 0: + self.end = last.time + return True + return False + def postProcess(self): + if len(self.list) > 0: + self.name = self.list[0].name + stack = dict() + cnt = 0 + last = 0 + for l in self.list: + # ftrace bug: reported duration is not reliable + # check each leaf and clip it at max possible length + if last and last.isLeaf(): + if last.length > l.time - last.time: + last.length = l.time - last.time + if l.isCall(): + stack[l.depth] = l + cnt += 1 + elif l.isReturn(): + if(l.depth not in stack): + if self.sv.verbose: + pprint('Post Process Error: Depth missing') + l.debugPrint() + return False + # calculate call length from call/return lines + cl = stack[l.depth] + cl.length = l.time - cl.time + if cl.name == self.vfname: + cl.name = l.name + stack.pop(l.depth) + l.length = 0 + cnt -= 1 + last = l + if(cnt == 0): + # trace caught the whole call tree + return True + elif(cnt < 0): + if self.sv.verbose: + pprint('Post Process Error: Depth is less than 0') + return False + # trace ended before call tree finished + return self.repair(cnt) + def deviceMatch(self, pid, data): + found = '' + # add the callgraph data to the device hierarchy + borderphase = { + 'dpm_prepare': 'suspend_prepare', + 'dpm_complete': 'resume_complete' + } + if(self.name in borderphase): + p = borderphase[self.name] + list = data.dmesg[p]['list'] + for devname in list: + dev = list[devname] + if(pid == dev['pid'] and + self.start <= dev['start'] and + self.end >= dev['end']): + cg = self.slice(dev) + if cg: + dev['ftrace'] = cg + found = devname + return found + for p in data.sortedPhases(): + if(data.dmesg[p]['start'] <= self.start and + self.start <= data.dmesg[p]['end']): + list = data.dmesg[p]['list'] + for devname in sorted(list, key=lambda k:list[k]['start']): + dev = list[devname] + if(pid == dev['pid'] and + self.start <= dev['start'] and + self.end >= dev['end']): + dev['ftrace'] = self + found = devname + break + break + return found + def newActionFromFunction(self, data): + name = self.name + if name in ['dpm_run_callback', 'dpm_prepare', 'dpm_complete']: + return + fs = self.start + fe = self.end + if fs < data.start or fe > data.end: + return + phase = '' + for p in data.sortedPhases(): + if(data.dmesg[p]['start'] <= self.start and + self.start < data.dmesg[p]['end']): + phase = p + break + if not phase: + return + out = data.newActionGlobal(name, fs, fe, -2) + if out: + phase, myname = out + data.dmesg[phase]['list'][myname]['ftrace'] = self + def debugPrint(self, info=''): + pprint('%s pid=%d [%f - %f] %.3f us' % \ + (self.name, self.pid, self.start, self.end, + (self.end - self.start)*1000000)) + for l in self.list: + if l.isLeaf(): + pprint('%f (%02d): %s(); (%.3f us)%s' % (l.time, \ + l.depth, l.name, l.length*1000000, info)) + elif l.freturn: + pprint('%f (%02d): %s} (%.3f us)%s' % (l.time, \ + l.depth, l.name, l.length*1000000, info)) + else: + pprint('%f (%02d): %s() { (%.3f us)%s' % (l.time, \ + l.depth, l.name, l.length*1000000, info)) + pprint(' ') + +class DevItem: + def __init__(self, test, phase, dev): + self.test = test + self.phase = phase + self.dev = dev + def isa(self, cls): + if 'htmlclass' in self.dev and cls in self.dev['htmlclass']: + return True + return False + +# Class: Timeline +# Description: +# A container for a device timeline which calculates +# all the html properties to display it correctly +class Timeline: + html_tblock = '<div id="block{0}" class="tblock" style="left:{1}%;width:{2}%;"><div class="tback" style="height:{3}px"></div>\n' + html_device = '<div id="{0}" title="{1}" class="thread{7}" style="left:{2}%;top:{3}px;height:{4}px;width:{5}%;{8}">{6}</div>\n' + html_phase = '<div class="phase" style="left:{0}%;width:{1}%;top:{2}px;height:{3}px;background:{4}">{5}</div>\n' + html_phaselet = '<div id="{0}" class="phaselet" style="left:{1}%;width:{2}%;background:{3}"></div>\n' + html_legend = '<div id="p{3}" class="square" style="left:{0}%;background:{1}"> {2}</div>\n' + def __init__(self, rowheight, scaleheight): + self.html = '' + self.height = 0 # total timeline height + self.scaleH = scaleheight # timescale (top) row height + self.rowH = rowheight # device row height + self.bodyH = 0 # body height + self.rows = 0 # total timeline rows + self.rowlines = dict() + self.rowheight = dict() + def createHeader(self, sv, stamp): + if(not stamp['time']): + return + self.html += '<div class="version"><a href="https://01.org/pm-graph">%s v%s</a></div>' \ + % (sv.title, sv.version) + if sv.logmsg and sv.testlog: + self.html += '<button id="showtest" class="logbtn btnfmt">log</button>' + if sv.dmesglog: + self.html += '<button id="showdmesg" class="logbtn btnfmt">dmesg</button>' + if sv.ftracelog: + self.html += '<button id="showftrace" class="logbtn btnfmt">ftrace</button>' + headline_stamp = '<div class="stamp">{0} {1} {2} {3}</div>\n' + self.html += headline_stamp.format(stamp['host'], stamp['kernel'], + stamp['mode'], stamp['time']) + if 'man' in stamp and 'plat' in stamp and 'cpu' in stamp and \ + stamp['man'] and stamp['plat'] and stamp['cpu']: + headline_sysinfo = '<div class="stamp sysinfo">{0} {1} <i>with</i> {2}</div>\n' + self.html += headline_sysinfo.format(stamp['man'], stamp['plat'], stamp['cpu']) + + # Function: getDeviceRows + # Description: + # determine how may rows the device funcs will take + # Arguments: + # rawlist: the list of devices/actions for a single phase + # Output: + # The total number of rows needed to display this phase of the timeline + def getDeviceRows(self, rawlist): + # clear all rows and set them to undefined + sortdict = dict() + for item in rawlist: + item.row = -1 + sortdict[item] = item.length + sortlist = sorted(sortdict, key=sortdict.get, reverse=True) + remaining = len(sortlist) + rowdata = dict() + row = 1 + # try to pack each row with as many ranges as possible + while(remaining > 0): + if(row not in rowdata): + rowdata[row] = [] + for i in sortlist: + if(i.row >= 0): + continue + s = i.time + e = i.time + i.length + valid = True + for ritem in rowdata[row]: + rs = ritem.time + re = ritem.time + ritem.length + if(not (((s <= rs) and (e <= rs)) or + ((s >= re) and (e >= re)))): + valid = False + break + if(valid): + rowdata[row].append(i) + i.row = row + remaining -= 1 + row += 1 + return row + # Function: getPhaseRows + # Description: + # Organize the timeline entries into the smallest + # number of rows possible, with no entry overlapping + # Arguments: + # devlist: the list of devices/actions in a group of contiguous phases + # Output: + # The total number of rows needed to display this phase of the timeline + def getPhaseRows(self, devlist, row=0, sortby='length'): + # clear all rows and set them to undefined + remaining = len(devlist) + rowdata = dict() + sortdict = dict() + myphases = [] + # initialize all device rows to -1 and calculate devrows + for item in devlist: + dev = item.dev + tp = (item.test, item.phase) + if tp not in myphases: + myphases.append(tp) + dev['row'] = -1 + if sortby == 'start': + # sort by start 1st, then length 2nd + sortdict[item] = (-1*float(dev['start']), float(dev['end']) - float(dev['start'])) + else: + # sort by length 1st, then name 2nd + sortdict[item] = (float(dev['end']) - float(dev['start']), item.dev['name']) + if 'src' in dev: + dev['devrows'] = self.getDeviceRows(dev['src']) + # sort the devlist by length so that large items graph on top + sortlist = sorted(sortdict, key=sortdict.get, reverse=True) + orderedlist = [] + for item in sortlist: + if item.dev['pid'] == -2: + orderedlist.append(item) + for item in sortlist: + if item not in orderedlist: + orderedlist.append(item) + # try to pack each row with as many devices as possible + while(remaining > 0): + rowheight = 1 + if(row not in rowdata): + rowdata[row] = [] + for item in orderedlist: + dev = item.dev + if(dev['row'] < 0): + s = dev['start'] + e = dev['end'] + valid = True + for ritem in rowdata[row]: + rs = ritem.dev['start'] + re = ritem.dev['end'] + if(not (((s <= rs) and (e <= rs)) or + ((s >= re) and (e >= re)))): + valid = False + break + if(valid): + rowdata[row].append(item) + dev['row'] = row + remaining -= 1 + if 'devrows' in dev and dev['devrows'] > rowheight: + rowheight = dev['devrows'] + for t, p in myphases: + if t not in self.rowlines or t not in self.rowheight: + self.rowlines[t] = dict() + self.rowheight[t] = dict() + if p not in self.rowlines[t] or p not in self.rowheight[t]: + self.rowlines[t][p] = dict() + self.rowheight[t][p] = dict() + rh = self.rowH + # section headers should use a different row height + if len(rowdata[row]) == 1 and \ + 'htmlclass' in rowdata[row][0].dev and \ + 'sec' in rowdata[row][0].dev['htmlclass']: + rh = 15 + self.rowlines[t][p][row] = rowheight + self.rowheight[t][p][row] = rowheight * rh + row += 1 + if(row > self.rows): + self.rows = int(row) + return row + def phaseRowHeight(self, test, phase, row): + return self.rowheight[test][phase][row] + def phaseRowTop(self, test, phase, row): + top = 0 + for i in sorted(self.rowheight[test][phase]): + if i >= row: + break + top += self.rowheight[test][phase][i] + return top + def calcTotalRows(self): + # Calculate the heights and offsets for the header and rows + maxrows = 0 + standardphases = [] + for t in self.rowlines: + for p in self.rowlines[t]: + total = 0 + for i in sorted(self.rowlines[t][p]): + total += self.rowlines[t][p][i] + if total > maxrows: + maxrows = total + if total == len(self.rowlines[t][p]): + standardphases.append((t, p)) + self.height = self.scaleH + (maxrows*self.rowH) + self.bodyH = self.height - self.scaleH + # if there is 1 line per row, draw them the standard way + for t, p in standardphases: + for i in sorted(self.rowheight[t][p]): + self.rowheight[t][p][i] = float(self.bodyH)/len(self.rowlines[t][p]) + def createZoomBox(self, mode='command', testcount=1): + # Create bounding box, add buttons + html_zoombox = '<center><button id="zoomin">ZOOM IN +</button><button id="zoomout">ZOOM OUT -</button><button id="zoomdef">ZOOM 1:1</button></center>\n' + html_timeline = '<div id="dmesgzoombox" class="zoombox">\n<div id="{0}" class="timeline" style="height:{1}px">\n' + html_devlist1 = '<button id="devlist1" class="devlist" style="float:left;">Device Detail{0}</button>' + html_devlist2 = '<button id="devlist2" class="devlist" style="float:right;">Device Detail2</button>\n' + if mode != 'command': + if testcount > 1: + self.html += html_devlist2 + self.html += html_devlist1.format('1') + else: + self.html += html_devlist1.format('') + self.html += html_zoombox + self.html += html_timeline.format('dmesg', self.height) + # Function: createTimeScale + # Description: + # Create the timescale for a timeline block + # Arguments: + # m0: start time (mode begin) + # mMax: end time (mode end) + # tTotal: total timeline time + # mode: suspend or resume + # Output: + # The html code needed to display the time scale + def createTimeScale(self, m0, mMax, tTotal, mode): + timescale = '<div class="t" style="right:{0}%">{1}</div>\n' + rline = '<div class="t" style="left:0;border-left:1px solid black;border-right:0;">{0}</div>\n' + output = '<div class="timescale">\n' + # set scale for timeline + mTotal = mMax - m0 + tS = 0.1 + if(tTotal <= 0): + return output+'</div>\n' + if(tTotal > 4): + tS = 1 + divTotal = int(mTotal/tS) + 1 + divEdge = (mTotal - tS*(divTotal-1))*100/mTotal + for i in range(divTotal): + htmlline = '' + if(mode == 'suspend'): + pos = '%0.3f' % (100 - ((float(i)*tS*100)/mTotal) - divEdge) + val = '%0.fms' % (float(i-divTotal+1)*tS*1000) + if(i == divTotal - 1): + val = mode + htmlline = timescale.format(pos, val) + else: + pos = '%0.3f' % (100 - ((float(i)*tS*100)/mTotal)) + val = '%0.fms' % (float(i)*tS*1000) + htmlline = timescale.format(pos, val) + if(i == 0): + htmlline = rline.format(mode) + output += htmlline + self.html += output+'</div>\n' + +# Class: TestProps +# Description: +# A list of values describing the properties of these test runs +class TestProps: + stampfmt = '# [a-z]*-(?P<m>[0-9]{2})(?P<d>[0-9]{2})(?P<y>[0-9]{2})-'+\ + '(?P<H>[0-9]{2})(?P<M>[0-9]{2})(?P<S>[0-9]{2})'+\ + ' (?P<host>.*) (?P<mode>.*) (?P<kernel>.*)$' + wififmt = '^# wifi *(?P<d>\S*) *(?P<s>\S*) *(?P<t>[0-9\.]+).*' + tstatfmt = '^# turbostat (?P<t>\S*)' + testerrfmt = '^# enter_sleep_error (?P<e>.*)' + sysinfofmt = '^# sysinfo .*' + cmdlinefmt = '^# command \| (?P<cmd>.*)' + kparamsfmt = '^# kparams \| (?P<kp>.*)' + devpropfmt = '# Device Properties: .*' + pinfofmt = '# platform-(?P<val>[a-z,A-Z,0-9]*): (?P<info>.*)' + tracertypefmt = '# tracer: (?P<t>.*)' + firmwarefmt = '# fwsuspend (?P<s>[0-9]*) fwresume (?P<r>[0-9]*)$' + procexecfmt = 'ps - (?P<ps>.*)$' + ftrace_line_fmt_fg = \ + '^ *(?P<time>[0-9\.]*) *\| *(?P<cpu>[0-9]*)\)'+\ + ' *(?P<proc>.*)-(?P<pid>[0-9]*) *\|'+\ + '[ +!#\*@$]*(?P<dur>[0-9\.]*) .*\| (?P<msg>.*)' + ftrace_line_fmt_nop = \ + ' *(?P<proc>.*)-(?P<pid>[0-9]*) *\[(?P<cpu>[0-9]*)\] *'+\ + '(?P<flags>\S*) *(?P<time>[0-9\.]*): *'+\ + '(?P<msg>.*)' + machinesuspend = 'machine_suspend\[.*' + def __init__(self): + self.stamp = '' + self.sysinfo = '' + self.cmdline = '' + self.testerror = [] + self.turbostat = [] + self.wifi = [] + self.fwdata = [] + self.ftrace_line_fmt = self.ftrace_line_fmt_nop + self.cgformat = False + self.data = 0 + self.ktemp = dict() + def setTracerType(self, tracer): + if(tracer == 'function_graph'): + self.cgformat = True + self.ftrace_line_fmt = self.ftrace_line_fmt_fg + elif(tracer == 'nop'): + self.ftrace_line_fmt = self.ftrace_line_fmt_nop + else: + doError('Invalid tracer format: [%s]' % tracer) + def stampInfo(self, line, sv): + if re.match(self.stampfmt, line): + self.stamp = line + return True + elif re.match(self.sysinfofmt, line): + self.sysinfo = line + return True + elif re.match(self.tstatfmt, line): + self.turbostat.append(line) + return True + elif re.match(self.wififmt, line): + self.wifi.append(line) + return True + elif re.match(self.testerrfmt, line): + self.testerror.append(line) + return True + elif re.match(self.firmwarefmt, line): + self.fwdata.append(line) + return True + elif(re.match(self.devpropfmt, line)): + self.parseDevprops(line, sv) + return True + elif(re.match(self.pinfofmt, line)): + self.parsePlatformInfo(line, sv) + return True + m = re.match(self.cmdlinefmt, line) + if m: + self.cmdline = m.group('cmd') + return True + m = re.match(self.tracertypefmt, line) + if(m): + self.setTracerType(m.group('t')) + return True + return False + def parseStamp(self, data, sv): + # global test data + m = re.match(self.stampfmt, self.stamp) + if not self.stamp or not m: + doError('data does not include the expected stamp') + data.stamp = {'time': '', 'host': '', 'mode': ''} + dt = datetime(int(m.group('y'))+2000, int(m.group('m')), + int(m.group('d')), int(m.group('H')), int(m.group('M')), + int(m.group('S'))) + data.stamp['time'] = dt.strftime('%B %d %Y, %I:%M:%S %p') + data.stamp['host'] = m.group('host') + data.stamp['mode'] = m.group('mode') + data.stamp['kernel'] = m.group('kernel') + if re.match(self.sysinfofmt, self.sysinfo): + for f in self.sysinfo.split('|'): + if '#' in f: + continue + tmp = f.strip().split(':', 1) + key = tmp[0] + val = tmp[1] + data.stamp[key] = val + sv.hostname = data.stamp['host'] + sv.suspendmode = data.stamp['mode'] + if sv.suspendmode == 'freeze': + self.machinesuspend = 'timekeeping_freeze\[.*' + else: + self.machinesuspend = 'machine_suspend\[.*' + if sv.suspendmode == 'command' and sv.ftracefile != '': + modes = ['on', 'freeze', 'standby', 'mem', 'disk'] + fp = sv.openlog(sv.ftracefile, 'r') + for line in fp: + m = re.match('.* machine_suspend\[(?P<mode>.*)\]', line) + if m and m.group('mode') in ['1', '2', '3', '4']: + sv.suspendmode = modes[int(m.group('mode'))] + data.stamp['mode'] = sv.suspendmode + break + fp.close() + sv.cmdline = self.cmdline + if not sv.stamp: + sv.stamp = data.stamp + # firmware data + if sv.suspendmode == 'mem' and len(self.fwdata) > data.testnumber: + m = re.match(self.firmwarefmt, self.fwdata[data.testnumber]) + if m: + data.fwSuspend, data.fwResume = int(m.group('s')), int(m.group('r')) + if(data.fwSuspend > 0 or data.fwResume > 0): + data.fwValid = True + # turbostat data + if len(self.turbostat) > data.testnumber: + m = re.match(self.tstatfmt, self.turbostat[data.testnumber]) + if m: + data.turbostat = m.group('t') + # wifi data + if len(self.wifi) > data.testnumber: + m = re.match(self.wififmt, self.wifi[data.testnumber]) + if m: + data.wifi = {'dev': m.group('d'), 'stat': m.group('s'), + 'time': float(m.group('t'))} + data.stamp['wifi'] = m.group('d') + # sleep mode enter errors + if len(self.testerror) > data.testnumber: + m = re.match(self.testerrfmt, self.testerror[data.testnumber]) + if m: + data.enterfail = m.group('e') + def devprops(self, data): + props = dict() + devlist = data.split(';') + for dev in devlist: + f = dev.split(',') + if len(f) < 3: + continue + dev = f[0] + props[dev] = DevProps() + props[dev].altname = f[1] + if int(f[2]): + props[dev].isasync = True + else: + props[dev].isasync = False + return props + def parseDevprops(self, line, sv): + idx = line.index(': ') + 2 + if idx >= len(line): + return + props = self.devprops(line[idx:]) + if sv.suspendmode == 'command' and 'testcommandstring' in props: + sv.testcommand = props['testcommandstring'].altname + sv.devprops = props + def parsePlatformInfo(self, line, sv): + m = re.match(self.pinfofmt, line) + if not m: + return + name, info = m.group('val'), m.group('info') + if name == 'devinfo': + sv.devprops = self.devprops(sv.b64unzip(info)) + return + elif name == 'testcmd': + sv.testcommand = info + return + field = info.split('|') + if len(field) < 2: + return + cmdline = field[0].strip() + output = sv.b64unzip(field[1].strip()) + sv.platinfo.append([name, cmdline, output]) + +# Class: TestRun +# Description: +# A container for a suspend/resume test run. This is necessary as +# there could be more than one, and they need to be separate. +class TestRun: + def __init__(self, dataobj): + self.data = dataobj + self.ftemp = dict() + self.ttemp = dict() + +class ProcessMonitor: + def __init__(self): + self.proclist = dict() + self.running = False + def procstat(self): + c = ['cat /proc/[1-9]*/stat 2>/dev/null'] + process = Popen(c, shell=True, stdout=PIPE) + running = dict() + for line in process.stdout: + data = ascii(line).split() + pid = data[0] + name = re.sub('[()]', '', data[1]) + user = int(data[13]) + kern = int(data[14]) + kjiff = ujiff = 0 + if pid not in self.proclist: + self.proclist[pid] = {'name' : name, 'user' : user, 'kern' : kern} + else: + val = self.proclist[pid] + ujiff = user - val['user'] + kjiff = kern - val['kern'] + val['user'] = user + val['kern'] = kern + if ujiff > 0 or kjiff > 0: + running[pid] = ujiff + kjiff + process.wait() + out = '' + for pid in running: + jiffies = running[pid] + val = self.proclist[pid] + if out: + out += ',' + out += '%s-%s %d' % (val['name'], pid, jiffies) + return 'ps - '+out + def processMonitor(self, tid): + while self.running: + out = self.procstat() + if out: + sysvals.fsetVal(out, 'trace_marker') + def start(self): + self.thread = Thread(target=self.processMonitor, args=(0,)) + self.running = True + self.thread.start() + def stop(self): + self.running = False + +# ----------------- FUNCTIONS -------------------- + +# Function: doesTraceLogHaveTraceEvents +# Description: +# Quickly determine if the ftrace log has all of the trace events, +# markers, and/or kprobes required for primary parsing. +def doesTraceLogHaveTraceEvents(): + kpcheck = ['_cal: (', '_ret: ('] + techeck = ['suspend_resume', 'device_pm_callback'] + tmcheck = ['SUSPEND START', 'RESUME COMPLETE'] + sysvals.usekprobes = False + fp = sysvals.openlog(sysvals.ftracefile, 'r') + for line in fp: + # check for kprobes + if not sysvals.usekprobes: + for i in kpcheck: + if i in line: + sysvals.usekprobes = True + # check for all necessary trace events + check = techeck[:] + for i in techeck: + if i in line: + check.remove(i) + techeck = check + # check for all necessary trace markers + check = tmcheck[:] + for i in tmcheck: + if i in line: + check.remove(i) + tmcheck = check + fp.close() + sysvals.usetraceevents = True if len(techeck) < 2 else False + sysvals.usetracemarkers = True if len(tmcheck) == 0 else False + +# Function: appendIncompleteTraceLog +# Description: +# [deprecated for kernel 3.15 or newer] +# Adds callgraph data which lacks trace event data. This is only +# for timelines generated from 3.15 or older +# Arguments: +# testruns: the array of Data objects obtained from parseKernelLog +def appendIncompleteTraceLog(testruns): + # create TestRun vessels for ftrace parsing + testcnt = len(testruns) + testidx = 0 + testrun = [] + for data in testruns: + testrun.append(TestRun(data)) + + # extract the callgraph and traceevent data + sysvals.vprint('Analyzing the ftrace data (%s)...' % \ + os.path.basename(sysvals.ftracefile)) + tp = TestProps() + tf = sysvals.openlog(sysvals.ftracefile, 'r') + data = 0 + for line in tf: + # remove any latent carriage returns + line = line.replace('\r\n', '') + if tp.stampInfo(line, sysvals): + continue + # parse only valid lines, if this is not one move on + m = re.match(tp.ftrace_line_fmt, line) + if(not m): + continue + # gather the basic message data from the line + m_time = m.group('time') + m_pid = m.group('pid') + m_msg = m.group('msg') + if(tp.cgformat): + m_param3 = m.group('dur') + else: + m_param3 = 'traceevent' + if(m_time and m_pid and m_msg): + t = FTraceLine(m_time, m_msg, m_param3) + pid = int(m_pid) + else: + continue + # the line should be a call, return, or event + if(not t.fcall and not t.freturn and not t.fevent): + continue + # look for the suspend start marker + if(t.startMarker()): + data = testrun[testidx].data + tp.parseStamp(data, sysvals) + data.setStart(t.time, t.name) + continue + if(not data): + continue + # find the end of resume + if(t.endMarker()): + data.setEnd(t.time, t.name) + testidx += 1 + if(testidx >= testcnt): + break + continue + # trace event processing + if(t.fevent): + continue + # call/return processing + elif sysvals.usecallgraph: + # create a callgraph object for the data + if(pid not in testrun[testidx].ftemp): + testrun[testidx].ftemp[pid] = [] + testrun[testidx].ftemp[pid].append(FTraceCallGraph(pid, sysvals)) + # when the call is finished, see which device matches it + cg = testrun[testidx].ftemp[pid][-1] + res = cg.addLine(t) + if(res != 0): + testrun[testidx].ftemp[pid].append(FTraceCallGraph(pid, sysvals)) + if(res == -1): + testrun[testidx].ftemp[pid][-1].addLine(t) + tf.close() + + for test in testrun: + # add the callgraph data to the device hierarchy + for pid in test.ftemp: + for cg in test.ftemp[pid]: + if len(cg.list) < 1 or cg.invalid or (cg.end - cg.start == 0): + continue + if(not cg.postProcess()): + id = 'task %s cpu %s' % (pid, m.group('cpu')) + sysvals.vprint('Sanity check failed for '+\ + id+', ignoring this callback') + continue + callstart = cg.start + callend = cg.end + for p in test.data.sortedPhases(): + if(test.data.dmesg[p]['start'] <= callstart and + callstart <= test.data.dmesg[p]['end']): + list = test.data.dmesg[p]['list'] + for devname in list: + dev = list[devname] + if(pid == dev['pid'] and + callstart <= dev['start'] and + callend >= dev['end']): + dev['ftrace'] = cg + break + +# Function: parseTraceLog +# Description: +# Analyze an ftrace log output file generated from this app during +# the execution phase. Used when the ftrace log is the primary data source +# and includes the suspend_resume and device_pm_callback trace events +# The ftrace filename is taken from sysvals +# Output: +# An array of Data objects +def parseTraceLog(live=False): + sysvals.vprint('Analyzing the ftrace data (%s)...' % \ + os.path.basename(sysvals.ftracefile)) + if(os.path.exists(sysvals.ftracefile) == False): + doError('%s does not exist' % sysvals.ftracefile) + if not live: + sysvals.setupAllKprobes() + ksuscalls = ['ksys_sync', 'pm_prepare_console'] + krescalls = ['pm_restore_console'] + tracewatch = ['irq_wakeup'] + if sysvals.usekprobes: + tracewatch += ['sync_filesystems', 'freeze_processes', 'syscore_suspend', + 'syscore_resume', 'resume_console', 'thaw_processes', 'CPU_ON', + 'CPU_OFF', 'acpi_suspend'] + + # extract the callgraph and traceevent data + s2idle_enter = hwsus = False + tp = TestProps() + testruns, testdata = [], [] + testrun, data, limbo = 0, 0, True + tf = sysvals.openlog(sysvals.ftracefile, 'r') + phase = 'suspend_prepare' + for line in tf: + # remove any latent carriage returns + line = line.replace('\r\n', '') + if tp.stampInfo(line, sysvals): + continue + # ignore all other commented lines + if line[0] == '#': + continue + # ftrace line: parse only valid lines + m = re.match(tp.ftrace_line_fmt, line) + if(not m): + continue + # gather the basic message data from the line + m_time = m.group('time') + m_proc = m.group('proc') + m_pid = m.group('pid') + m_msg = m.group('msg') + if(tp.cgformat): + m_param3 = m.group('dur') + else: + m_param3 = 'traceevent' + if(m_time and m_pid and m_msg): + t = FTraceLine(m_time, m_msg, m_param3) + pid = int(m_pid) + else: + continue + # the line should be a call, return, or event + if(not t.fcall and not t.freturn and not t.fevent): + continue + # find the start of suspend + if(t.startMarker()): + data, limbo = Data(len(testdata)), False + testdata.append(data) + testrun = TestRun(data) + testruns.append(testrun) + tp.parseStamp(data, sysvals) + data.setStart(t.time, t.name) + data.first_suspend_prepare = True + phase = data.setPhase('suspend_prepare', t.time, True) + continue + if(not data or limbo): + continue + # process cpu exec line + if t.type == 'tracing_mark_write': + m = re.match(tp.procexecfmt, t.name) + if(m): + proclist = dict() + for ps in m.group('ps').split(','): + val = ps.split() + if not val: + continue + name = val[0].replace('--', '-') + proclist[name] = int(val[1]) + data.pstl[t.time] = proclist + continue + # find the end of resume + if(t.endMarker()): + if data.tKernRes == 0: + data.tKernRes = t.time + data.handleEndMarker(t.time, t.name) + if(not sysvals.usetracemarkers): + # no trace markers? then quit and be sure to finish recording + # the event we used to trigger resume end + if('thaw_processes' in testrun.ttemp and len(testrun.ttemp['thaw_processes']) > 0): + # if an entry exists, assume this is its end + testrun.ttemp['thaw_processes'][-1]['end'] = t.time + limbo = True + continue + # trace event processing + if(t.fevent): + if(t.type == 'suspend_resume'): + # suspend_resume trace events have two types, begin and end + if(re.match('(?P<name>.*) begin$', t.name)): + isbegin = True + elif(re.match('(?P<name>.*) end$', t.name)): + isbegin = False + else: + continue + if '[' in t.name: + m = re.match('(?P<name>.*)\[.*', t.name) + else: + m = re.match('(?P<name>.*) .*', t.name) + name = m.group('name') + # ignore these events + if(name.split('[')[0] in tracewatch): + continue + # -- phase changes -- + # start of kernel suspend + if(re.match('suspend_enter\[.*', t.name)): + if(isbegin and data.tKernSus == 0): + data.tKernSus = t.time + continue + # suspend_prepare start + elif(re.match('dpm_prepare\[.*', t.name)): + if isbegin and data.first_suspend_prepare: + data.first_suspend_prepare = False + if data.tKernSus == 0: + data.tKernSus = t.time + continue + phase = data.setPhase('suspend_prepare', t.time, isbegin) + continue + # suspend start + elif(re.match('dpm_suspend\[.*', t.name)): + phase = data.setPhase('suspend', t.time, isbegin) + continue + # suspend_late start + elif(re.match('dpm_suspend_late\[.*', t.name)): + phase = data.setPhase('suspend_late', t.time, isbegin) + continue + # suspend_noirq start + elif(re.match('dpm_suspend_noirq\[.*', t.name)): + phase = data.setPhase('suspend_noirq', t.time, isbegin) + continue + # suspend_machine/resume_machine + elif(re.match(tp.machinesuspend, t.name)): + lp = data.lastPhase() + if(isbegin): + hwsus = True + if lp.startswith('resume_machine'): + # trim out s2idle loops, track time trying to freeze + llp = data.lastPhase(2) + if llp.startswith('suspend_machine'): + if 'trying' not in data.dmesg[llp]: + data.dmesg[llp]['trying'] = 0 + data.dmesg[llp]['trying'] += \ + t.time - data.dmesg[lp]['start'] + data.currphase = '' + del data.dmesg[lp] + continue + phase = data.setPhase('suspend_machine', data.dmesg[lp]['end'], True) + data.setPhase(phase, t.time, False) + if data.tSuspended == 0: + data.tSuspended = t.time + else: + if lp.startswith('resume_machine'): + data.dmesg[lp]['end'] = t.time + continue + phase = data.setPhase('resume_machine', t.time, True) + if(sysvals.suspendmode in ['mem', 'disk']): + susp = phase.replace('resume', 'suspend') + if susp in data.dmesg: + data.dmesg[susp]['end'] = t.time + data.tSuspended = t.time + data.tResumed = t.time + continue + # resume_noirq start + elif(re.match('dpm_resume_noirq\[.*', t.name)): + phase = data.setPhase('resume_noirq', t.time, isbegin) + continue + # resume_early start + elif(re.match('dpm_resume_early\[.*', t.name)): + phase = data.setPhase('resume_early', t.time, isbegin) + continue + # resume start + elif(re.match('dpm_resume\[.*', t.name)): + phase = data.setPhase('resume', t.time, isbegin) + continue + # resume complete start + elif(re.match('dpm_complete\[.*', t.name)): + phase = data.setPhase('resume_complete', t.time, isbegin) + continue + # skip trace events inside devices calls + if(not data.isTraceEventOutsideDeviceCalls(pid, t.time)): + continue + # global events (outside device calls) are graphed + if(name not in testrun.ttemp): + testrun.ttemp[name] = [] + # special handling for s2idle_enter + if name == 'machine_suspend': + if hwsus: + s2idle_enter = hwsus = False + elif s2idle_enter and not isbegin: + if(len(testrun.ttemp[name]) > 0): + testrun.ttemp[name][-1]['end'] = t.time + testrun.ttemp[name][-1]['loop'] += 1 + elif not s2idle_enter and isbegin: + s2idle_enter = True + testrun.ttemp[name].append({'begin': t.time, + 'end': t.time, 'pid': pid, 'loop': 0}) + continue + if(isbegin): + # create a new list entry + testrun.ttemp[name].append(\ + {'begin': t.time, 'end': t.time, 'pid': pid}) + else: + if(len(testrun.ttemp[name]) > 0): + # if an entry exists, assume this is its end + testrun.ttemp[name][-1]['end'] = t.time + # device callback start + elif(t.type == 'device_pm_callback_start'): + if phase not in data.dmesg: + continue + m = re.match('(?P<drv>.*) (?P<d>.*), parent: *(?P<p>.*), .*',\ + t.name); + if(not m): + continue + drv = m.group('drv') + n = m.group('d') + p = m.group('p') + if(n and p): + data.newAction(phase, n, pid, p, t.time, -1, drv) + if pid not in data.devpids: + data.devpids.append(pid) + # device callback finish + elif(t.type == 'device_pm_callback_end'): + if phase not in data.dmesg: + continue + m = re.match('(?P<drv>.*) (?P<d>.*), err.*', t.name); + if(not m): + continue + n = m.group('d') + dev = data.findDevice(phase, n) + if dev: + dev['length'] = t.time - dev['start'] + dev['end'] = t.time + # kprobe event processing + elif(t.fkprobe): + kprobename = t.type + kprobedata = t.name + key = (kprobename, pid) + # displayname is generated from kprobe data + displayname = '' + if(t.fcall): + displayname = sysvals.kprobeDisplayName(kprobename, kprobedata) + if not displayname: + continue + if(key not in tp.ktemp): + tp.ktemp[key] = [] + tp.ktemp[key].append({ + 'pid': pid, + 'begin': t.time, + 'end': -1, + 'name': displayname, + 'cdata': kprobedata, + 'proc': m_proc, + }) + # start of kernel resume + if(data.tKernSus == 0 and phase == 'suspend_prepare' \ + and kprobename in ksuscalls): + data.tKernSus = t.time + elif(t.freturn): + if(key not in tp.ktemp) or len(tp.ktemp[key]) < 1: + continue + e = next((x for x in reversed(tp.ktemp[key]) if x['end'] < 0), 0) + if not e: + continue + e['end'] = t.time + e['rdata'] = kprobedata + # end of kernel resume + if(phase != 'suspend_prepare' and kprobename in krescalls): + if phase in data.dmesg: + data.dmesg[phase]['end'] = t.time + data.tKernRes = t.time + + # callgraph processing + elif sysvals.usecallgraph: + # create a callgraph object for the data + key = (m_proc, pid) + if(key not in testrun.ftemp): + testrun.ftemp[key] = [] + testrun.ftemp[key].append(FTraceCallGraph(pid, sysvals)) + # when the call is finished, see which device matches it + cg = testrun.ftemp[key][-1] + res = cg.addLine(t) + if(res != 0): + testrun.ftemp[key].append(FTraceCallGraph(pid, sysvals)) + if(res == -1): + testrun.ftemp[key][-1].addLine(t) + tf.close() + if len(testdata) < 1: + sysvals.vprint('WARNING: ftrace start marker is missing') + if data and not data.devicegroups: + sysvals.vprint('WARNING: ftrace end marker is missing') + data.handleEndMarker(t.time, t.name) + + if sysvals.suspendmode == 'command': + for test in testruns: + for p in test.data.sortedPhases(): + if p == 'suspend_prepare': + test.data.dmesg[p]['start'] = test.data.start + test.data.dmesg[p]['end'] = test.data.end + else: + test.data.dmesg[p]['start'] = test.data.end + test.data.dmesg[p]['end'] = test.data.end + test.data.tSuspended = test.data.end + test.data.tResumed = test.data.end + test.data.fwValid = False + + # dev source and procmon events can be unreadable with mixed phase height + if sysvals.usedevsrc or sysvals.useprocmon: + sysvals.mixedphaseheight = False + + # expand phase boundaries so there are no gaps + for data in testdata: + lp = data.sortedPhases()[0] + for p in data.sortedPhases(): + if(p != lp and not ('machine' in p and 'machine' in lp)): + data.dmesg[lp]['end'] = data.dmesg[p]['start'] + lp = p + + for i in range(len(testruns)): + test = testruns[i] + data = test.data + # find the total time range for this test (begin, end) + tlb, tle = data.start, data.end + if i < len(testruns) - 1: + tle = testruns[i+1].data.start + # add the process usage data to the timeline + if sysvals.useprocmon: + data.createProcessUsageEvents() + # add the traceevent data to the device hierarchy + if(sysvals.usetraceevents): + # add actual trace funcs + for name in sorted(test.ttemp): + for event in test.ttemp[name]: + if event['end'] - event['begin'] <= 0: + continue + title = name + if name == 'machine_suspend' and 'loop' in event: + title = 's2idle_enter_%dx' % event['loop'] + data.newActionGlobal(title, event['begin'], event['end'], event['pid']) + # add the kprobe based virtual tracefuncs as actual devices + for key in sorted(tp.ktemp): + name, pid = key + if name not in sysvals.tracefuncs: + continue + if pid not in data.devpids: + data.devpids.append(pid) + for e in tp.ktemp[key]: + kb, ke = e['begin'], e['end'] + if ke - kb < 0.000001 or tlb > kb or tle <= kb: + continue + color = sysvals.kprobeColor(name) + data.newActionGlobal(e['name'], kb, ke, pid, color) + # add config base kprobes and dev kprobes + if sysvals.usedevsrc: + for key in sorted(tp.ktemp): + name, pid = key + if name in sysvals.tracefuncs or name not in sysvals.dev_tracefuncs: + continue + for e in tp.ktemp[key]: + kb, ke = e['begin'], e['end'] + if ke - kb < 0.000001 or tlb > kb or tle <= kb: + continue + data.addDeviceFunctionCall(e['name'], name, e['proc'], pid, kb, + ke, e['cdata'], e['rdata']) + if sysvals.usecallgraph: + # add the callgraph data to the device hierarchy + sortlist = dict() + for key in sorted(test.ftemp): + proc, pid = key + for cg in test.ftemp[key]: + if len(cg.list) < 1 or cg.invalid or (cg.end - cg.start == 0): + continue + if(not cg.postProcess()): + id = 'task %s' % (pid) + sysvals.vprint('Sanity check failed for '+\ + id+', ignoring this callback') + continue + # match cg data to devices + devname = '' + if sysvals.suspendmode != 'command': + devname = cg.deviceMatch(pid, data) + if not devname: + sortkey = '%f%f%d' % (cg.start, cg.end, pid) + sortlist[sortkey] = cg + elif len(cg.list) > 1000000 and cg.name != sysvals.ftopfunc: + sysvals.vprint('WARNING: the callgraph for %s is massive (%d lines)' %\ + (devname, len(cg.list))) + # create blocks for orphan cg data + for sortkey in sorted(sortlist): + cg = sortlist[sortkey] + name = cg.name + if sysvals.isCallgraphFunc(name): + sysvals.vprint('Callgraph found for task %d: %.3fms, %s' % (cg.pid, (cg.end - cg.start)*1000, name)) + cg.newActionFromFunction(data) + if sysvals.suspendmode == 'command': + return (testdata, '') + + # fill in any missing phases + error = [] + for data in testdata: + tn = '' if len(testdata) == 1 else ('%d' % (data.testnumber + 1)) + terr = '' + phasedef = data.phasedef + lp = 'suspend_prepare' + for p in sorted(phasedef, key=lambda k:phasedef[k]['order']): + if p not in data.dmesg: + if not terr: + ph = p if 'machine' in p else lp + terr = '%s%s failed in %s phase' % (sysvals.suspendmode, tn, ph) + pprint('TEST%s FAILED: %s' % (tn, terr)) + error.append(terr) + if data.tSuspended == 0: + data.tSuspended = data.dmesg[lp]['end'] + if data.tResumed == 0: + data.tResumed = data.dmesg[lp]['end'] + data.fwValid = False + sysvals.vprint('WARNING: phase "%s" is missing!' % p) + lp = p + if not terr and 'dev' in data.wifi and data.wifi['stat'] == 'timeout': + terr = '%s%s failed in wifi_resume <i>(%s %.0fs timeout)</i>' % \ + (sysvals.suspendmode, tn, data.wifi['dev'], data.wifi['time']) + error.append(terr) + if not terr and data.enterfail: + pprint('test%s FAILED: enter %s failed with %s' % (tn, sysvals.suspendmode, data.enterfail)) + terr = 'test%s failed to enter %s mode' % (tn, sysvals.suspendmode) + error.append(terr) + if data.tSuspended == 0: + data.tSuspended = data.tKernRes + if data.tResumed == 0: + data.tResumed = data.tSuspended + + if(len(sysvals.devicefilter) > 0): + data.deviceFilter(sysvals.devicefilter) + data.fixupInitcallsThatDidntReturn() + if sysvals.usedevsrc: + data.optimizeDevSrc() + + # x2: merge any overlapping devices between test runs + if sysvals.usedevsrc and len(testdata) > 1: + tc = len(testdata) + for i in range(tc - 1): + devlist = testdata[i].overflowDevices() + for j in range(i + 1, tc): + testdata[j].mergeOverlapDevices(devlist) + testdata[0].stitchTouchingThreads(testdata[1:]) + return (testdata, ', '.join(error)) + +# Function: loadKernelLog +# Description: +# [deprecated for kernel 3.15.0 or newer] +# load the dmesg file into memory and fix up any ordering issues +# The dmesg filename is taken from sysvals +# Output: +# An array of empty Data objects with only their dmesgtext attributes set +def loadKernelLog(): + sysvals.vprint('Analyzing the dmesg data (%s)...' % \ + os.path.basename(sysvals.dmesgfile)) + if(os.path.exists(sysvals.dmesgfile) == False): + doError('%s does not exist' % sysvals.dmesgfile) + + # there can be multiple test runs in a single file + tp = TestProps() + tp.stamp = datetime.now().strftime('# suspend-%m%d%y-%H%M%S localhost mem unknown') + testruns = [] + data = 0 + lf = sysvals.openlog(sysvals.dmesgfile, 'r') + for line in lf: + line = line.replace('\r\n', '') + idx = line.find('[') + if idx > 1: + line = line[idx:] + if tp.stampInfo(line, sysvals): + continue + m = re.match('[ \t]*(\[ *)(?P<ktime>[0-9\.]*)(\]) (?P<msg>.*)', line) + if(not m): + continue + msg = m.group("msg") + if(re.match('PM: Syncing filesystems.*', msg)): + if(data): + testruns.append(data) + data = Data(len(testruns)) + tp.parseStamp(data, sysvals) + if(not data): + continue + m = re.match('.* *(?P<k>[0-9]\.[0-9]{2}\.[0-9]-.*) .*', msg) + if(m): + sysvals.stamp['kernel'] = m.group('k') + m = re.match('PM: Preparing system for (?P<m>.*) sleep', msg) + if(m): + sysvals.stamp['mode'] = sysvals.suspendmode = m.group('m') + data.dmesgtext.append(line) + lf.close() + + if data: + testruns.append(data) + if len(testruns) < 1: + doError('dmesg log has no suspend/resume data: %s' \ + % sysvals.dmesgfile) + + # fix lines with same timestamp/function with the call and return swapped + for data in testruns: + last = '' + for line in data.dmesgtext: + mc = re.match('.*(\[ *)(?P<t>[0-9\.]*)(\]) calling '+\ + '(?P<f>.*)\+ @ .*, parent: .*', line) + mr = re.match('.*(\[ *)(?P<t>[0-9\.]*)(\]) call '+\ + '(?P<f>.*)\+ returned .* after (?P<dt>.*) usecs', last) + if(mc and mr and (mc.group('t') == mr.group('t')) and + (mc.group('f') == mr.group('f'))): + i = data.dmesgtext.index(last) + j = data.dmesgtext.index(line) + data.dmesgtext[i] = line + data.dmesgtext[j] = last + last = line + return testruns + +# Function: parseKernelLog +# Description: +# [deprecated for kernel 3.15.0 or newer] +# Analyse a dmesg log output file generated from this app during +# the execution phase. Create a set of device structures in memory +# for subsequent formatting in the html output file +# This call is only for legacy support on kernels where the ftrace +# data lacks the suspend_resume or device_pm_callbacks trace events. +# Arguments: +# data: an empty Data object (with dmesgtext) obtained from loadKernelLog +# Output: +# The filled Data object +def parseKernelLog(data): + phase = 'suspend_runtime' + + if(data.fwValid): + sysvals.vprint('Firmware Suspend = %u ns, Firmware Resume = %u ns' % \ + (data.fwSuspend, data.fwResume)) + + # dmesg phase match table + dm = { + 'suspend_prepare': ['PM: Syncing filesystems.*'], + 'suspend': ['PM: Entering [a-z]* sleep.*', 'Suspending console.*'], + 'suspend_late': ['PM: suspend of devices complete after.*'], + 'suspend_noirq': ['PM: late suspend of devices complete after.*'], + 'suspend_machine': ['PM: noirq suspend of devices complete after.*'], + 'resume_machine': ['ACPI: Low-level resume complete.*'], + 'resume_noirq': ['ACPI: Waking up from system sleep state.*'], + 'resume_early': ['PM: noirq resume of devices complete after.*'], + 'resume': ['PM: early resume of devices complete after.*'], + 'resume_complete': ['PM: resume of devices complete after.*'], + 'post_resume': ['.*Restarting tasks \.\.\..*'], + } + if(sysvals.suspendmode == 'standby'): + dm['resume_machine'] = ['PM: Restoring platform NVS memory'] + elif(sysvals.suspendmode == 'disk'): + dm['suspend_late'] = ['PM: freeze of devices complete after.*'] + dm['suspend_noirq'] = ['PM: late freeze of devices complete after.*'] + dm['suspend_machine'] = ['PM: noirq freeze of devices complete after.*'] + dm['resume_machine'] = ['PM: Restoring platform NVS memory'] + dm['resume_early'] = ['PM: noirq restore of devices complete after.*'] + dm['resume'] = ['PM: early restore of devices complete after.*'] + dm['resume_complete'] = ['PM: restore of devices complete after.*'] + elif(sysvals.suspendmode == 'freeze'): + dm['resume_machine'] = ['ACPI: resume from mwait'] + + # action table (expected events that occur and show up in dmesg) + at = { + 'sync_filesystems': { + 'smsg': 'PM: Syncing filesystems.*', + 'emsg': 'PM: Preparing system for mem sleep.*' }, + 'freeze_user_processes': { + 'smsg': 'Freezing user space processes .*', + 'emsg': 'Freezing remaining freezable tasks.*' }, + 'freeze_tasks': { + 'smsg': 'Freezing remaining freezable tasks.*', + 'emsg': 'PM: Entering (?P<mode>[a-z,A-Z]*) sleep.*' }, + 'ACPI prepare': { + 'smsg': 'ACPI: Preparing to enter system sleep state.*', + 'emsg': 'PM: Saving platform NVS memory.*' }, + 'PM vns': { + 'smsg': 'PM: Saving platform NVS memory.*', + 'emsg': 'Disabling non-boot CPUs .*' }, + } + + t0 = -1.0 + cpu_start = -1.0 + prevktime = -1.0 + actions = dict() + for line in data.dmesgtext: + # parse each dmesg line into the time and message + m = re.match('[ \t]*(\[ *)(?P<ktime>[0-9\.]*)(\]) (?P<msg>.*)', line) + if(m): + val = m.group('ktime') + try: + ktime = float(val) + except: + continue + msg = m.group('msg') + # initialize data start to first line time + if t0 < 0: + data.setStart(ktime) + t0 = ktime + else: + continue + + # check for a phase change line + phasechange = False + for p in dm: + for s in dm[p]: + if(re.match(s, msg)): + phasechange, phase = True, p + break + + # hack for determining resume_machine end for freeze + if(not sysvals.usetraceevents and sysvals.suspendmode == 'freeze' \ + and phase == 'resume_machine' and \ + re.match('calling (?P<f>.*)\+ @ .*, parent: .*', msg)): + data.setPhase(phase, ktime, False) + phase = 'resume_noirq' + data.setPhase(phase, ktime, True) + + if phasechange: + if phase == 'suspend_prepare': + data.setPhase(phase, ktime, True) + data.setStart(ktime) + data.tKernSus = ktime + elif phase == 'suspend': + lp = data.lastPhase() + if lp: + data.setPhase(lp, ktime, False) + data.setPhase(phase, ktime, True) + elif phase == 'suspend_late': + lp = data.lastPhase() + if lp: + data.setPhase(lp, ktime, False) + data.setPhase(phase, ktime, True) + elif phase == 'suspend_noirq': + lp = data.lastPhase() + if lp: + data.setPhase(lp, ktime, False) + data.setPhase(phase, ktime, True) + elif phase == 'suspend_machine': + lp = data.lastPhase() + if lp: + data.setPhase(lp, ktime, False) + data.setPhase(phase, ktime, True) + elif phase == 'resume_machine': + lp = data.lastPhase() + if(sysvals.suspendmode in ['freeze', 'standby']): + data.tSuspended = prevktime + if lp: + data.setPhase(lp, prevktime, False) + else: + data.tSuspended = ktime + if lp: + data.setPhase(lp, prevktime, False) + data.tResumed = ktime + data.setPhase(phase, ktime, True) + elif phase == 'resume_noirq': + lp = data.lastPhase() + if lp: + data.setPhase(lp, ktime, False) + data.setPhase(phase, ktime, True) + elif phase == 'resume_early': + lp = data.lastPhase() + if lp: + data.setPhase(lp, ktime, False) + data.setPhase(phase, ktime, True) + elif phase == 'resume': + lp = data.lastPhase() + if lp: + data.setPhase(lp, ktime, False) + data.setPhase(phase, ktime, True) + elif phase == 'resume_complete': + lp = data.lastPhase() + if lp: + data.setPhase(lp, ktime, False) + data.setPhase(phase, ktime, True) + elif phase == 'post_resume': + lp = data.lastPhase() + if lp: + data.setPhase(lp, ktime, False) + data.setEnd(ktime) + data.tKernRes = ktime + break + + # -- device callbacks -- + if(phase in data.sortedPhases()): + # device init call + if(re.match('calling (?P<f>.*)\+ @ .*, parent: .*', msg)): + sm = re.match('calling (?P<f>.*)\+ @ '+\ + '(?P<n>.*), parent: (?P<p>.*)', msg); + f = sm.group('f') + n = sm.group('n') + p = sm.group('p') + if(f and n and p): + data.newAction(phase, f, int(n), p, ktime, -1, '') + # device init return + elif(re.match('call (?P<f>.*)\+ returned .* after '+\ + '(?P<t>.*) usecs', msg)): + sm = re.match('call (?P<f>.*)\+ returned .* after '+\ + '(?P<t>.*) usecs(?P<a>.*)', msg); + f = sm.group('f') + t = sm.group('t') + list = data.dmesg[phase]['list'] + if(f in list): + dev = list[f] + dev['length'] = int(t) + dev['end'] = ktime + + # if trace events are not available, these are better than nothing + if(not sysvals.usetraceevents): + # look for known actions + for a in sorted(at): + if(re.match(at[a]['smsg'], msg)): + if(a not in actions): + actions[a] = [] + actions[a].append({'begin': ktime, 'end': ktime}) + if(re.match(at[a]['emsg'], msg)): + if(a in actions): + actions[a][-1]['end'] = ktime + # now look for CPU on/off events + if(re.match('Disabling non-boot CPUs .*', msg)): + # start of first cpu suspend + cpu_start = ktime + elif(re.match('Enabling non-boot CPUs .*', msg)): + # start of first cpu resume + cpu_start = ktime + elif(re.match('smpboot: CPU (?P<cpu>[0-9]*) is now offline', msg)): + # end of a cpu suspend, start of the next + m = re.match('smpboot: CPU (?P<cpu>[0-9]*) is now offline', msg) + cpu = 'CPU'+m.group('cpu') + if(cpu not in actions): + actions[cpu] = [] + actions[cpu].append({'begin': cpu_start, 'end': ktime}) + cpu_start = ktime + elif(re.match('CPU(?P<cpu>[0-9]*) is up', msg)): + # end of a cpu resume, start of the next + m = re.match('CPU(?P<cpu>[0-9]*) is up', msg) + cpu = 'CPU'+m.group('cpu') + if(cpu not in actions): + actions[cpu] = [] + actions[cpu].append({'begin': cpu_start, 'end': ktime}) + cpu_start = ktime + prevktime = ktime + data.initDevicegroups() + + # fill in any missing phases + phasedef = data.phasedef + terr, lp = '', 'suspend_prepare' + for p in sorted(phasedef, key=lambda k:phasedef[k]['order']): + if p not in data.dmesg: + if not terr: + pprint('TEST FAILED: %s failed in %s phase' % (sysvals.suspendmode, lp)) + terr = '%s failed in %s phase' % (sysvals.suspendmode, lp) + if data.tSuspended == 0: + data.tSuspended = data.dmesg[lp]['end'] + if data.tResumed == 0: + data.tResumed = data.dmesg[lp]['end'] + sysvals.vprint('WARNING: phase "%s" is missing!' % p) + lp = p + lp = data.sortedPhases()[0] + for p in data.sortedPhases(): + if(p != lp and not ('machine' in p and 'machine' in lp)): + data.dmesg[lp]['end'] = data.dmesg[p]['start'] + lp = p + if data.tSuspended == 0: + data.tSuspended = data.tKernRes + if data.tResumed == 0: + data.tResumed = data.tSuspended + + # fill in any actions we've found + for name in sorted(actions): + for event in actions[name]: + data.newActionGlobal(name, event['begin'], event['end']) + + if(len(sysvals.devicefilter) > 0): + data.deviceFilter(sysvals.devicefilter) + data.fixupInitcallsThatDidntReturn() + return True + +def callgraphHTML(sv, hf, num, cg, title, color, devid): + html_func_top = '<article id="{0}" class="atop" style="background:{1}">\n<input type="checkbox" class="pf" id="f{2}" checked/><label for="f{2}">{3} {4}</label>\n' + html_func_start = '<article>\n<input type="checkbox" class="pf" id="f{0}" checked/><label for="f{0}">{1} {2}</label>\n' + html_func_end = '</article>\n' + html_func_leaf = '<article>{0} {1}</article>\n' + + cgid = devid + if cg.id: + cgid += cg.id + cglen = (cg.end - cg.start) * 1000 + if cglen < sv.mincglen: + return num + + fmt = '<r>(%.3f ms @ '+sv.timeformat+' to '+sv.timeformat+')</r>' + flen = fmt % (cglen, cg.start, cg.end) + hf.write(html_func_top.format(cgid, color, num, title, flen)) + num += 1 + for line in cg.list: + if(line.length < 0.000000001): + flen = '' + else: + fmt = '<n>(%.3f ms @ '+sv.timeformat+')</n>' + flen = fmt % (line.length*1000, line.time) + if line.isLeaf(): + hf.write(html_func_leaf.format(line.name, flen)) + elif line.freturn: + hf.write(html_func_end) + else: + hf.write(html_func_start.format(num, line.name, flen)) + num += 1 + hf.write(html_func_end) + return num + +def addCallgraphs(sv, hf, data): + hf.write('<section id="callgraphs" class="callgraph">\n') + # write out the ftrace data converted to html + num = 0 + for p in data.sortedPhases(): + if sv.cgphase and p != sv.cgphase: + continue + list = data.dmesg[p]['list'] + for d in data.sortedDevices(p): + if len(sv.cgfilter) > 0 and d not in sv.cgfilter: + continue + dev = list[d] + color = 'white' + if 'color' in data.dmesg[p]: + color = data.dmesg[p]['color'] + if 'color' in dev: + color = dev['color'] + name = d if '[' not in d else d.split('[')[0] + if(d in sv.devprops): + name = sv.devprops[d].altName(d) + if 'drv' in dev and dev['drv']: + name += ' {%s}' % dev['drv'] + if sv.suspendmode in suspendmodename: + name += ' '+p + if('ftrace' in dev): + cg = dev['ftrace'] + if cg.name == sv.ftopfunc: + name = 'top level suspend/resume call' + num = callgraphHTML(sv, hf, num, cg, + name, color, dev['id']) + if('ftraces' in dev): + for cg in dev['ftraces']: + num = callgraphHTML(sv, hf, num, cg, + name+' → '+cg.name, color, dev['id']) + hf.write('\n\n </section>\n') + +def summaryCSS(title, center=True): + tdcenter = 'text-align:center;' if center else '' + out = '<!DOCTYPE html>\n<html>\n<head>\n\ + <meta http-equiv="content-type" content="text/html; charset=UTF-8">\n\ + <title>'+title+'</title>\n\ + <style type=\'text/css\'>\n\ + .stamp {width: 100%;text-align:center;background:#888;line-height:30px;color:white;font: 25px Arial;}\n\ + table {width:100%;border-collapse: collapse;border:1px solid;}\n\ + th {border: 1px solid black;background:#222;color:white;}\n\ + td {font: 14px "Times New Roman";'+tdcenter+'}\n\ + tr.head td {border: 1px solid black;background:#aaa;}\n\ + tr.alt {background-color:#ddd;}\n\ + tr.notice {color:red;}\n\ + .minval {background-color:#BBFFBB;}\n\ + .medval {background-color:#BBBBFF;}\n\ + .maxval {background-color:#FFBBBB;}\n\ + .head a {color:#000;text-decoration: none;}\n\ + </style>\n</head>\n<body>\n' + return out + +# Function: createHTMLSummarySimple +# Description: +# Create summary html file for a series of tests +# Arguments: +# testruns: array of Data objects from parseTraceLog +def createHTMLSummarySimple(testruns, htmlfile, title): + # write the html header first (html head, css code, up to body start) + html = summaryCSS('Summary - SleepGraph') + + # extract the test data into list + list = dict() + tAvg, tMin, tMax, tMed = [0.0, 0.0], [0.0, 0.0], [0.0, 0.0], [dict(), dict()] + iMin, iMed, iMax = [0, 0], [0, 0], [0, 0] + num = 0 + useturbo = usewifi = False + lastmode = '' + cnt = dict() + for data in sorted(testruns, key=lambda v:(v['mode'], v['host'], v['kernel'], v['time'])): + mode = data['mode'] + if mode not in list: + list[mode] = {'data': [], 'avg': [0,0], 'min': [0,0], 'max': [0,0], 'med': [0,0]} + if lastmode and lastmode != mode and num > 0: + for i in range(2): + s = sorted(tMed[i]) + list[lastmode]['med'][i] = s[int(len(s)//2)] + iMed[i] = tMed[i][list[lastmode]['med'][i]] + list[lastmode]['avg'] = [tAvg[0] / num, tAvg[1] / num] + list[lastmode]['min'] = tMin + list[lastmode]['max'] = tMax + list[lastmode]['idx'] = (iMin, iMed, iMax) + tAvg, tMin, tMax, tMed = [0.0, 0.0], [0.0, 0.0], [0.0, 0.0], [dict(), dict()] + iMin, iMed, iMax = [0, 0], [0, 0], [0, 0] + num = 0 + pkgpc10 = syslpi = wifi = '' + if 'pkgpc10' in data and 'syslpi' in data: + pkgpc10, syslpi, useturbo = data['pkgpc10'], data['syslpi'], True + if 'wifi' in data: + wifi, usewifi = data['wifi'], True + res = data['result'] + tVal = [float(data['suspend']), float(data['resume'])] + list[mode]['data'].append([data['host'], data['kernel'], + data['time'], tVal[0], tVal[1], data['url'], res, + data['issues'], data['sus_worst'], data['sus_worsttime'], + data['res_worst'], data['res_worsttime'], pkgpc10, syslpi, wifi]) + idx = len(list[mode]['data']) - 1 + if res.startswith('fail in'): + res = 'fail' + if res not in cnt: + cnt[res] = 1 + else: + cnt[res] += 1 + if res == 'pass': + for i in range(2): + tMed[i][tVal[i]] = idx + tAvg[i] += tVal[i] + if tMin[i] == 0 or tVal[i] < tMin[i]: + iMin[i] = idx + tMin[i] = tVal[i] + if tMax[i] == 0 or tVal[i] > tMax[i]: + iMax[i] = idx + tMax[i] = tVal[i] + num += 1 + lastmode = mode + if lastmode and num > 0: + for i in range(2): + s = sorted(tMed[i]) + list[lastmode]['med'][i] = s[int(len(s)//2)] + iMed[i] = tMed[i][list[lastmode]['med'][i]] + list[lastmode]['avg'] = [tAvg[0] / num, tAvg[1] / num] + list[lastmode]['min'] = tMin + list[lastmode]['max'] = tMax + list[lastmode]['idx'] = (iMin, iMed, iMax) + + # group test header + desc = [] + for ilk in sorted(cnt, reverse=True): + if cnt[ilk] > 0: + desc.append('%d %s' % (cnt[ilk], ilk)) + html += '<div class="stamp">%s (%d tests: %s)</div>\n' % (title, len(testruns), ', '.join(desc)) + th = '\t<th>{0}</th>\n' + td = '\t<td>{0}</td>\n' + tdh = '\t<td{1}>{0}</td>\n' + tdlink = '\t<td><a href="{0}">html</a></td>\n' + cols = 12 + if useturbo: + cols += 2 + if usewifi: + cols += 1 + colspan = '%d' % cols + + # table header + html += '<table>\n<tr>\n' + th.format('#') +\ + th.format('Mode') + th.format('Host') + th.format('Kernel') +\ + th.format('Test Time') + th.format('Result') + th.format('Issues') +\ + th.format('Suspend') + th.format('Resume') +\ + th.format('Worst Suspend Device') + th.format('SD Time') +\ + th.format('Worst Resume Device') + th.format('RD Time') + if useturbo: + html += th.format('PkgPC10') + th.format('SysLPI') + if usewifi: + html += th.format('Wifi') + html += th.format('Detail')+'</tr>\n' + # export list into html + head = '<tr class="head"><td>{0}</td><td>{1}</td>'+\ + '<td colspan='+colspan+' class="sus">Suspend Avg={2} '+\ + '<span class=minval><a href="#s{10}min">Min={3}</a></span> '+\ + '<span class=medval><a href="#s{10}med">Med={4}</a></span> '+\ + '<span class=maxval><a href="#s{10}max">Max={5}</a></span> '+\ + 'Resume Avg={6} '+\ + '<span class=minval><a href="#r{10}min">Min={7}</a></span> '+\ + '<span class=medval><a href="#r{10}med">Med={8}</a></span> '+\ + '<span class=maxval><a href="#r{10}max">Max={9}</a></span></td>'+\ + '</tr>\n' + headnone = '<tr class="head"><td>{0}</td><td>{1}</td><td colspan='+\ + colspan+'></td></tr>\n' + for mode in sorted(list): + # header line for each suspend mode + num = 0 + tAvg, tMin, tMax, tMed = list[mode]['avg'], list[mode]['min'],\ + list[mode]['max'], list[mode]['med'] + count = len(list[mode]['data']) + if 'idx' in list[mode]: + iMin, iMed, iMax = list[mode]['idx'] + html += head.format('%d' % count, mode.upper(), + '%.3f' % tAvg[0], '%.3f' % tMin[0], '%.3f' % tMed[0], '%.3f' % tMax[0], + '%.3f' % tAvg[1], '%.3f' % tMin[1], '%.3f' % tMed[1], '%.3f' % tMax[1], + mode.lower() + ) + else: + iMin = iMed = iMax = [-1, -1, -1] + html += headnone.format('%d' % count, mode.upper()) + for d in list[mode]['data']: + # row classes - alternate row color + rcls = ['alt'] if num % 2 == 1 else [] + if d[6] != 'pass': + rcls.append('notice') + html += '<tr class="'+(' '.join(rcls))+'">\n' if len(rcls) > 0 else '<tr>\n' + # figure out if the line has sus or res highlighted + idx = list[mode]['data'].index(d) + tHigh = ['', ''] + for i in range(2): + tag = 's%s' % mode if i == 0 else 'r%s' % mode + if idx == iMin[i]: + tHigh[i] = ' id="%smin" class=minval title="Minimum"' % tag + elif idx == iMax[i]: + tHigh[i] = ' id="%smax" class=maxval title="Maximum"' % tag + elif idx == iMed[i]: + tHigh[i] = ' id="%smed" class=medval title="Median"' % tag + html += td.format("%d" % (list[mode]['data'].index(d) + 1)) # row + html += td.format(mode) # mode + html += td.format(d[0]) # host + html += td.format(d[1]) # kernel + html += td.format(d[2]) # time + html += td.format(d[6]) # result + html += td.format(d[7]) # issues + html += tdh.format('%.3f ms' % d[3], tHigh[0]) if d[3] else td.format('') # suspend + html += tdh.format('%.3f ms' % d[4], tHigh[1]) if d[4] else td.format('') # resume + html += td.format(d[8]) # sus_worst + html += td.format('%.3f ms' % d[9]) if d[9] else td.format('') # sus_worst time + html += td.format(d[10]) # res_worst + html += td.format('%.3f ms' % d[11]) if d[11] else td.format('') # res_worst time + if useturbo: + html += td.format(d[12]) # pkg_pc10 + html += td.format(d[13]) # syslpi + if usewifi: + html += td.format(d[14]) # wifi + html += tdlink.format(d[5]) if d[5] else td.format('') # url + html += '</tr>\n' + num += 1 + + # flush the data to file + hf = open(htmlfile, 'w') + hf.write(html+'</table>\n</body>\n</html>\n') + hf.close() + +def createHTMLDeviceSummary(testruns, htmlfile, title): + html = summaryCSS('Device Summary - SleepGraph', False) + + # create global device list from all tests + devall = dict() + for data in testruns: + host, url, devlist = data['host'], data['url'], data['devlist'] + for type in devlist: + if type not in devall: + devall[type] = dict() + mdevlist, devlist = devall[type], data['devlist'][type] + for name in devlist: + length = devlist[name] + if name not in mdevlist: + mdevlist[name] = {'name': name, 'host': host, + 'worst': length, 'total': length, 'count': 1, + 'url': url} + else: + if length > mdevlist[name]['worst']: + mdevlist[name]['worst'] = length + mdevlist[name]['url'] = url + mdevlist[name]['host'] = host + mdevlist[name]['total'] += length + mdevlist[name]['count'] += 1 + + # generate the html + th = '\t<th>{0}</th>\n' + td = '\t<td align=center>{0}</td>\n' + tdr = '\t<td align=right>{0}</td>\n' + tdlink = '\t<td align=center><a href="{0}">html</a></td>\n' + limit = 1 + for type in sorted(devall, reverse=True): + num = 0 + devlist = devall[type] + # table header + html += '<div class="stamp">%s (%s devices > %d ms)</div><table>\n' % \ + (title, type.upper(), limit) + html += '<tr>\n' + '<th align=right>Device Name</th>' +\ + th.format('Average Time') + th.format('Count') +\ + th.format('Worst Time') + th.format('Host (worst time)') +\ + th.format('Link (worst time)') + '</tr>\n' + for name in sorted(devlist, key=lambda k:(devlist[k]['worst'], \ + devlist[k]['total'], devlist[k]['name']), reverse=True): + data = devall[type][name] + data['average'] = data['total'] / data['count'] + if data['average'] < limit: + continue + # row classes - alternate row color + rcls = ['alt'] if num % 2 == 1 else [] + html += '<tr class="'+(' '.join(rcls))+'">\n' if len(rcls) > 0 else '<tr>\n' + html += tdr.format(data['name']) # name + html += td.format('%.3f ms' % data['average']) # average + html += td.format(data['count']) # count + html += td.format('%.3f ms' % data['worst']) # worst + html += td.format(data['host']) # host + html += tdlink.format(data['url']) # url + html += '</tr>\n' + num += 1 + html += '</table>\n' + + # flush the data to file + hf = open(htmlfile, 'w') + hf.write(html+'</body>\n</html>\n') + hf.close() + return devall + +def createHTMLIssuesSummary(testruns, issues, htmlfile, title, extra=''): + multihost = len([e for e in issues if len(e['urls']) > 1]) > 0 + html = summaryCSS('Issues Summary - SleepGraph', False) + total = len(testruns) + + # generate the html + th = '\t<th>{0}</th>\n' + td = '\t<td align={0}>{1}</td>\n' + tdlink = '<a href="{1}">{0}</a>' + subtitle = '%d issues' % len(issues) if len(issues) > 0 else 'no issues' + html += '<div class="stamp">%s (%s)</div><table>\n' % (title, subtitle) + html += '<tr>\n' + th.format('Issue') + th.format('Count') + if multihost: + html += th.format('Hosts') + html += th.format('Tests') + th.format('Fail Rate') +\ + th.format('First Instance') + '</tr>\n' + + num = 0 + for e in sorted(issues, key=lambda v:v['count'], reverse=True): + testtotal = 0 + links = [] + for host in sorted(e['urls']): + links.append(tdlink.format(host, e['urls'][host][0])) + testtotal += len(e['urls'][host]) + rate = '%d/%d (%.2f%%)' % (testtotal, total, 100*float(testtotal)/float(total)) + # row classes - alternate row color + rcls = ['alt'] if num % 2 == 1 else [] + html += '<tr class="'+(' '.join(rcls))+'">\n' if len(rcls) > 0 else '<tr>\n' + html += td.format('left', e['line']) # issue + html += td.format('center', e['count']) # count + if multihost: + html += td.format('center', len(e['urls'])) # hosts + html += td.format('center', testtotal) # test count + html += td.format('center', rate) # test rate + html += td.format('center nowrap', '<br>'.join(links)) # links + html += '</tr>\n' + num += 1 + + # flush the data to file + hf = open(htmlfile, 'w') + hf.write(html+'</table>\n'+extra+'</body>\n</html>\n') + hf.close() + return issues + +def ordinal(value): + suffix = 'th' + if value < 10 or value > 19: + if value % 10 == 1: + suffix = 'st' + elif value % 10 == 2: + suffix = 'nd' + elif value % 10 == 3: + suffix = 'rd' + return '%d%s' % (value, suffix) + +# Function: createHTML +# Description: +# Create the output html file from the resident test data +# Arguments: +# testruns: array of Data objects from parseKernelLog or parseTraceLog +# Output: +# True if the html file was created, false if it failed +def createHTML(testruns, testfail): + if len(testruns) < 1: + pprint('ERROR: Not enough test data to build a timeline') + return + + kerror = False + for data in testruns: + if data.kerror: + kerror = True + if(sysvals.suspendmode in ['freeze', 'standby']): + data.trimFreezeTime(testruns[-1].tSuspended) + else: + data.getMemTime() + + # html function templates + html_error = '<div id="{1}" title="kernel error/warning" class="err" style="right:{0}%">{2}→</div>\n' + html_traceevent = '<div title="{0}" class="traceevent{6}" style="left:{1}%;top:{2}px;height:{3}px;width:{4}%;line-height:{3}px;{7}">{5}</div>\n' + html_cpuexec = '<div class="jiffie" style="left:{0}%;top:{1}px;height:{2}px;width:{3}%;background:{4};"></div>\n' + html_timetotal = '<table class="time1">\n<tr>'\ + '<td class="green" title="{3}">{2} Suspend Time: <b>{0} ms</b></td>'\ + '<td class="yellow" title="{4}">{2} Resume Time: <b>{1} ms</b></td>'\ + '</tr>\n</table>\n' + html_timetotal2 = '<table class="time1">\n<tr>'\ + '<td class="green" title="{4}">{3} Suspend Time: <b>{0} ms</b></td>'\ + '<td class="gray" title="time spent in low-power mode with clock running">'+sysvals.suspendmode+' time: <b>{1} ms</b></td>'\ + '<td class="yellow" title="{5}">{3} Resume Time: <b>{2} ms</b></td>'\ + '</tr>\n</table>\n' + html_timetotal3 = '<table class="time1">\n<tr>'\ + '<td class="green">Execution Time: <b>{0} ms</b></td>'\ + '<td class="yellow">Command: <b>{1}</b></td>'\ + '</tr>\n</table>\n' + html_fail = '<table class="testfail"><tr><td>{0}</td></tr></table>\n' + html_kdesc = '<td class="{3}" title="time spent in kernel execution">{0}Kernel {2}: {1} ms</td>' + html_fwdesc = '<td class="{3}" title="time spent in firmware">{0}Firmware {2}: {1} ms</td>' + html_wifdesc = '<td class="yellow" title="time for wifi to reconnect after resume complete ({2})">{0}Wifi Resume: {1}</td>' + + # html format variables + scaleH = 20 + if kerror: + scaleH = 40 + + # device timeline + devtl = Timeline(30, scaleH) + + # write the test title and general info header + devtl.createHeader(sysvals, testruns[0].stamp) + + # Generate the header for this timeline + for data in testruns: + tTotal = data.end - data.start + if(tTotal == 0): + doError('No timeline data') + if sysvals.suspendmode == 'command': + run_time = '%.0f' % (tTotal * 1000) + if sysvals.testcommand: + testdesc = sysvals.testcommand + else: + testdesc = 'unknown' + if(len(testruns) > 1): + testdesc = ordinal(data.testnumber+1)+' '+testdesc + thtml = html_timetotal3.format(run_time, testdesc) + devtl.html += thtml + continue + # typical full suspend/resume header + stot, rtot = sktime, rktime = data.getTimeValues() + ssrc, rsrc, testdesc, testdesc2 = ['kernel'], ['kernel'], 'Kernel', '' + if data.fwValid: + stot += (data.fwSuspend/1000000.0) + rtot += (data.fwResume/1000000.0) + ssrc.append('firmware') + rsrc.append('firmware') + testdesc = 'Total' + if 'time' in data.wifi and data.wifi['stat'] != 'timeout': + rtot += data.end - data.tKernRes + (data.wifi['time'] * 1000.0) + rsrc.append('wifi') + testdesc = 'Total' + suspend_time, resume_time = '%.3f' % stot, '%.3f' % rtot + stitle = 'time from kernel suspend start to %s mode [%s time]' % \ + (sysvals.suspendmode, ' & '.join(ssrc)) + rtitle = 'time from %s mode to kernel resume complete [%s time]' % \ + (sysvals.suspendmode, ' & '.join(rsrc)) + if(len(testruns) > 1): + testdesc = testdesc2 = ordinal(data.testnumber+1) + testdesc2 += ' ' + if(len(data.tLow) == 0): + thtml = html_timetotal.format(suspend_time, \ + resume_time, testdesc, stitle, rtitle) + else: + low_time = '+'.join(data.tLow) + thtml = html_timetotal2.format(suspend_time, low_time, \ + resume_time, testdesc, stitle, rtitle) + devtl.html += thtml + if not data.fwValid and 'dev' not in data.wifi: + continue + # extra detail when the times come from multiple sources + thtml = '<table class="time2">\n<tr>' + thtml += html_kdesc.format(testdesc2, '%.3f'%sktime, 'Suspend', 'green') + if data.fwValid: + sftime = '%.3f'%(data.fwSuspend / 1000000.0) + rftime = '%.3f'%(data.fwResume / 1000000.0) + thtml += html_fwdesc.format(testdesc2, sftime, 'Suspend', 'green') + thtml += html_fwdesc.format(testdesc2, rftime, 'Resume', 'yellow') + thtml += html_kdesc.format(testdesc2, '%.3f'%rktime, 'Resume', 'yellow') + if 'time' in data.wifi: + if data.wifi['stat'] != 'timeout': + wtime = '%.0f ms'%(data.end - data.tKernRes + (data.wifi['time'] * 1000.0)) + else: + wtime = 'TIMEOUT' + thtml += html_wifdesc.format(testdesc2, wtime, data.wifi['dev']) + thtml += '</tr>\n</table>\n' + devtl.html += thtml + if testfail: + devtl.html += html_fail.format(testfail) + + # time scale for potentially multiple datasets + t0 = testruns[0].start + tMax = testruns[-1].end + tTotal = tMax - t0 + + # determine the maximum number of rows we need to draw + fulllist = [] + threadlist = [] + pscnt = 0 + devcnt = 0 + for data in testruns: + data.selectTimelineDevices('%f', tTotal, sysvals.mindevlen) + for group in data.devicegroups: + devlist = [] + for phase in group: + for devname in sorted(data.tdevlist[phase]): + d = DevItem(data.testnumber, phase, data.dmesg[phase]['list'][devname]) + devlist.append(d) + if d.isa('kth'): + threadlist.append(d) + else: + if d.isa('ps'): + pscnt += 1 + else: + devcnt += 1 + fulllist.append(d) + if sysvals.mixedphaseheight: + devtl.getPhaseRows(devlist) + if not sysvals.mixedphaseheight: + if len(threadlist) > 0 and len(fulllist) > 0: + if pscnt > 0 and devcnt > 0: + msg = 'user processes & device pm callbacks' + elif pscnt > 0: + msg = 'user processes' + else: + msg = 'device pm callbacks' + d = testruns[0].addHorizontalDivider(msg, testruns[-1].end) + fulllist.insert(0, d) + devtl.getPhaseRows(fulllist) + if len(threadlist) > 0: + d = testruns[0].addHorizontalDivider('asynchronous kernel threads', testruns[-1].end) + threadlist.insert(0, d) + devtl.getPhaseRows(threadlist, devtl.rows) + devtl.calcTotalRows() + + # draw the full timeline + devtl.createZoomBox(sysvals.suspendmode, len(testruns)) + for data in testruns: + # draw each test run and block chronologically + phases = {'suspend':[],'resume':[]} + for phase in data.sortedPhases(): + if data.dmesg[phase]['start'] >= data.tSuspended: + phases['resume'].append(phase) + else: + phases['suspend'].append(phase) + # now draw the actual timeline blocks + for dir in phases: + # draw suspend and resume blocks separately + bname = '%s%d' % (dir[0], data.testnumber) + if dir == 'suspend': + m0 = data.start + mMax = data.tSuspended + left = '%f' % (((m0-t0)*100.0)/tTotal) + else: + m0 = data.tSuspended + mMax = data.end + # in an x2 run, remove any gap between blocks + if len(testruns) > 1 and data.testnumber == 0: + mMax = testruns[1].start + left = '%f' % ((((m0-t0)*100.0)+sysvals.srgap/2)/tTotal) + mTotal = mMax - m0 + # if a timeline block is 0 length, skip altogether + if mTotal == 0: + continue + width = '%f' % (((mTotal*100.0)-sysvals.srgap/2)/tTotal) + devtl.html += devtl.html_tblock.format(bname, left, width, devtl.scaleH) + for b in phases[dir]: + # draw the phase color background + phase = data.dmesg[b] + length = phase['end']-phase['start'] + left = '%f' % (((phase['start']-m0)*100.0)/mTotal) + width = '%f' % ((length*100.0)/mTotal) + devtl.html += devtl.html_phase.format(left, width, \ + '%.3f'%devtl.scaleH, '%.3f'%devtl.bodyH, \ + data.dmesg[b]['color'], '') + for e in data.errorinfo[dir]: + # draw red lines for any kernel errors found + type, t, idx1, idx2 = e + id = '%d_%d' % (idx1, idx2) + right = '%f' % (((mMax-t)*100.0)/mTotal) + devtl.html += html_error.format(right, id, type) + for b in phases[dir]: + # draw the devices for this phase + phaselist = data.dmesg[b]['list'] + for d in sorted(data.tdevlist[b]): + dname = d if '[' not in d else d.split('[')[0] + name, dev = dname, phaselist[d] + drv = xtraclass = xtrainfo = xtrastyle = '' + if 'htmlclass' in dev: + xtraclass = dev['htmlclass'] + if 'color' in dev: + xtrastyle = 'background:%s;' % dev['color'] + if(d in sysvals.devprops): + name = sysvals.devprops[d].altName(d) + xtraclass = sysvals.devprops[d].xtraClass() + xtrainfo = sysvals.devprops[d].xtraInfo() + elif xtraclass == ' kth': + xtrainfo = ' kernel_thread' + if('drv' in dev and dev['drv']): + drv = ' {%s}' % dev['drv'] + rowheight = devtl.phaseRowHeight(data.testnumber, b, dev['row']) + rowtop = devtl.phaseRowTop(data.testnumber, b, dev['row']) + top = '%.3f' % (rowtop + devtl.scaleH) + left = '%f' % (((dev['start']-m0)*100)/mTotal) + width = '%f' % (((dev['end']-dev['start'])*100)/mTotal) + length = ' (%0.3f ms) ' % ((dev['end']-dev['start'])*1000) + title = name+drv+xtrainfo+length + if sysvals.suspendmode == 'command': + title += sysvals.testcommand + elif xtraclass == ' ps': + if 'suspend' in b: + title += 'pre_suspend_process' + else: + title += 'post_resume_process' + else: + title += b + devtl.html += devtl.html_device.format(dev['id'], \ + title, left, top, '%.3f'%rowheight, width, \ + dname+drv, xtraclass, xtrastyle) + if('cpuexec' in dev): + for t in sorted(dev['cpuexec']): + start, end = t + j = float(dev['cpuexec'][t]) / 5 + if j > 1.0: + j = 1.0 + height = '%.3f' % (rowheight/3) + top = '%.3f' % (rowtop + devtl.scaleH + 2*rowheight/3) + left = '%f' % (((start-m0)*100)/mTotal) + width = '%f' % ((end-start)*100/mTotal) + color = 'rgba(255, 0, 0, %f)' % j + devtl.html += \ + html_cpuexec.format(left, top, height, width, color) + if('src' not in dev): + continue + # draw any trace events for this device + for e in dev['src']: + if e.length == 0: + continue + height = '%.3f' % devtl.rowH + top = '%.3f' % (rowtop + devtl.scaleH + (e.row*devtl.rowH)) + left = '%f' % (((e.time-m0)*100)/mTotal) + width = '%f' % (e.length*100/mTotal) + xtrastyle = '' + if e.color: + xtrastyle = 'background:%s;' % e.color + devtl.html += \ + html_traceevent.format(e.title(), \ + left, top, height, width, e.text(), '', xtrastyle) + # draw the time scale, try to make the number of labels readable + devtl.createTimeScale(m0, mMax, tTotal, dir) + devtl.html += '</div>\n' + + # timeline is finished + devtl.html += '</div>\n</div>\n' + + # draw a legend which describes the phases by color + if sysvals.suspendmode != 'command': + phasedef = testruns[-1].phasedef + devtl.html += '<div class="legend">\n' + pdelta = 100.0/len(phasedef.keys()) + pmargin = pdelta / 4.0 + for phase in sorted(phasedef, key=lambda k:phasedef[k]['order']): + id, p = '', phasedef[phase] + for word in phase.split('_'): + id += word[0] + order = '%.2f' % ((p['order'] * pdelta) + pmargin) + name = phase.replace('_', ' ') + devtl.html += devtl.html_legend.format(order, p['color'], name, id) + devtl.html += '</div>\n' + + hf = open(sysvals.htmlfile, 'w') + addCSS(hf, sysvals, len(testruns), kerror) + + # write the device timeline + hf.write(devtl.html) + hf.write('<div id="devicedetailtitle"></div>\n') + hf.write('<div id="devicedetail" style="display:none;">\n') + # draw the colored boxes for the device detail section + for data in testruns: + hf.write('<div id="devicedetail%d">\n' % data.testnumber) + pscolor = 'linear-gradient(to top left, #ccc, #eee)' + hf.write(devtl.html_phaselet.format('pre_suspend_process', \ + '0', '0', pscolor)) + for b in data.sortedPhases(): + phase = data.dmesg[b] + length = phase['end']-phase['start'] + left = '%.3f' % (((phase['start']-t0)*100.0)/tTotal) + width = '%.3f' % ((length*100.0)/tTotal) + hf.write(devtl.html_phaselet.format(b, left, width, \ + data.dmesg[b]['color'])) + hf.write(devtl.html_phaselet.format('post_resume_process', \ + '0', '0', pscolor)) + if sysvals.suspendmode == 'command': + hf.write(devtl.html_phaselet.format('cmdexec', '0', '0', pscolor)) + hf.write('</div>\n') + hf.write('</div>\n') + + # write the ftrace data (callgraph) + if sysvals.cgtest >= 0 and len(testruns) > sysvals.cgtest: + data = testruns[sysvals.cgtest] + else: + data = testruns[-1] + if sysvals.usecallgraph: + addCallgraphs(sysvals, hf, data) + + # add the test log as a hidden div + if sysvals.testlog and sysvals.logmsg: + hf.write('<div id="testlog" style="display:none;">\n'+sysvals.logmsg+'</div>\n') + # add the dmesg log as a hidden div + if sysvals.dmesglog and sysvals.dmesgfile: + hf.write('<div id="dmesglog" style="display:none;">\n') + lf = sysvals.openlog(sysvals.dmesgfile, 'r') + for line in lf: + line = line.replace('<', '<').replace('>', '>') + hf.write(line) + lf.close() + hf.write('</div>\n') + # add the ftrace log as a hidden div + if sysvals.ftracelog and sysvals.ftracefile: + hf.write('<div id="ftracelog" style="display:none;">\n') + lf = sysvals.openlog(sysvals.ftracefile, 'r') + for line in lf: + hf.write(line) + lf.close() + hf.write('</div>\n') + + # write the footer and close + addScriptCode(hf, testruns) + hf.write('</body>\n</html>\n') + hf.close() + return True + +def addCSS(hf, sv, testcount=1, kerror=False, extra=''): + kernel = sv.stamp['kernel'] + host = sv.hostname[0].upper()+sv.hostname[1:] + mode = sv.suspendmode + if sv.suspendmode in suspendmodename: + mode = suspendmodename[sv.suspendmode] + title = host+' '+mode+' '+kernel + + # various format changes by flags + cgchk = 'checked' + cgnchk = 'not(:checked)' + if sv.cgexp: + cgchk = 'not(:checked)' + cgnchk = 'checked' + + hoverZ = 'z-index:8;' + if sv.usedevsrc: + hoverZ = '' + + devlistpos = 'absolute' + if testcount > 1: + devlistpos = 'relative' + + scaleTH = 20 + if kerror: + scaleTH = 60 + + # write the html header first (html head, css code, up to body start) + html_header = '<!DOCTYPE html>\n<html>\n<head>\n\ + <meta http-equiv="content-type" content="text/html; charset=UTF-8">\n\ + <title>'+title+'</title>\n\ + <style type=\'text/css\'>\n\ + body {overflow-y:scroll;}\n\ + .stamp {width:100%;text-align:center;background:gray;line-height:30px;color:white;font:25px Arial;}\n\ + .stamp.sysinfo {font:10px Arial;}\n\ + .callgraph {margin-top:30px;box-shadow:5px 5px 20px black;}\n\ + .callgraph article * {padding-left:28px;}\n\ + h1 {color:black;font:bold 30px Times;}\n\ + t0 {color:black;font:bold 30px Times;}\n\ + t1 {color:black;font:30px Times;}\n\ + t2 {color:black;font:25px Times;}\n\ + t3 {color:black;font:20px Times;white-space:nowrap;}\n\ + t4 {color:black;font:bold 30px Times;line-height:60px;white-space:nowrap;}\n\ + cS {font:bold 13px Times;}\n\ + table {width:100%;}\n\ + .gray {background:rgba(80,80,80,0.1);}\n\ + .green {background:rgba(204,255,204,0.4);}\n\ + .purple {background:rgba(128,0,128,0.2);}\n\ + .yellow {background:rgba(255,255,204,0.4);}\n\ + .blue {background:rgba(169,208,245,0.4);}\n\ + .time1 {font:22px Arial;border:1px solid;}\n\ + .time2 {font:15px Arial;border-bottom:1px solid;border-left:1px solid;border-right:1px solid;}\n\ + .testfail {font:bold 22px Arial;color:red;border:1px dashed;}\n\ + td {text-align:center;}\n\ + r {color:#500000;font:15px Tahoma;}\n\ + n {color:#505050;font:15px Tahoma;}\n\ + .tdhl {color:red;}\n\ + .hide {display:none;}\n\ + .pf {display:none;}\n\ + .pf:'+cgchk+' + label {background:url(\'data:image/svg+xml;utf,<?xml version="1.0" standalone="no"?><svg xmlns="http://www.w3.org/2000/svg" height="18" width="18" version="1.1"><circle cx="9" cy="9" r="8" stroke="black" stroke-width="1" fill="white"/><rect x="4" y="8" width="10" height="2" style="fill:black;stroke-width:0"/><rect x="8" y="4" width="2" height="10" style="fill:black;stroke-width:0"/></svg>\') no-repeat left center;}\n\ + .pf:'+cgnchk+' ~ label {background:url(\'data:image/svg+xml;utf,<?xml version="1.0" standalone="no"?><svg xmlns="http://www.w3.org/2000/svg" height="18" width="18" version="1.1"><circle cx="9" cy="9" r="8" stroke="black" stroke-width="1" fill="white"/><rect x="4" y="8" width="10" height="2" style="fill:black;stroke-width:0"/></svg>\') no-repeat left center;}\n\ + .pf:'+cgchk+' ~ *:not(:nth-child(2)) {display:none;}\n\ + .zoombox {position:relative;width:100%;overflow-x:scroll;-webkit-user-select:none;-moz-user-select:none;user-select:none;}\n\ + .timeline {position:relative;font-size:14px;cursor:pointer;width:100%; overflow:hidden;background:linear-gradient(#cccccc, white);}\n\ + .thread {position:absolute;height:0%;overflow:hidden;z-index:7;line-height:30px;font-size:14px;border:1px solid;text-align:center;white-space:nowrap;}\n\ + .thread.ps {border-radius:3px;background:linear-gradient(to top, #ccc, #eee);}\n\ + .thread:hover {background:white;border:1px solid red;'+hoverZ+'}\n\ + .thread.sec,.thread.sec:hover {background:black;border:0;color:white;line-height:15px;font-size:10px;}\n\ + .hover {background:white;border:1px solid red;'+hoverZ+'}\n\ + .hover.sync {background:white;}\n\ + .hover.bg,.hover.kth,.hover.sync,.hover.ps {background:white;}\n\ + .jiffie {position:absolute;pointer-events: none;z-index:8;}\n\ + .traceevent {position:absolute;font-size:10px;z-index:7;overflow:hidden;color:black;text-align:center;white-space:nowrap;border-radius:5px;border:1px solid black;background:linear-gradient(to bottom right,#CCC,#969696);}\n\ + .traceevent:hover {color:white;font-weight:bold;border:1px solid white;}\n\ + .phase {position:absolute;overflow:hidden;border:0px;text-align:center;}\n\ + .phaselet {float:left;overflow:hidden;border:0px;text-align:center;min-height:100px;font-size:24px;}\n\ + .t {position:absolute;line-height:'+('%d'%scaleTH)+'px;pointer-events:none;top:0;height:100%;border-right:1px solid black;z-index:6;}\n\ + .err {position:absolute;top:0%;height:100%;border-right:3px solid red;color:red;font:bold 14px Times;line-height:18px;}\n\ + .legend {position:relative; width:100%; height:40px; text-align:center;margin-bottom:20px}\n\ + .legend .square {position:absolute;cursor:pointer;top:10px; width:0px;height:20px;border:1px solid;padding-left:20px;}\n\ + button {height:40px;width:200px;margin-bottom:20px;margin-top:20px;font-size:24px;}\n\ + .btnfmt {position:relative;float:right;height:25px;width:auto;margin-top:3px;margin-bottom:0;font-size:10px;text-align:center;}\n\ + .devlist {position:'+devlistpos+';width:190px;}\n\ + a:link {color:white;text-decoration:none;}\n\ + a:visited {color:white;}\n\ + a:hover {color:white;}\n\ + a:active {color:white;}\n\ + .version {position:relative;float:left;color:white;font-size:10px;line-height:30px;margin-left:10px;}\n\ + #devicedetail {min-height:100px;box-shadow:5px 5px 20px black;}\n\ + .tblock {position:absolute;height:100%;background:#ddd;}\n\ + .tback {position:absolute;width:100%;background:linear-gradient(#ccc, #ddd);}\n\ + .bg {z-index:1;}\n\ +'+extra+'\ + </style>\n</head>\n<body>\n' + hf.write(html_header) + +# Function: addScriptCode +# Description: +# Adds the javascript code to the output html +# Arguments: +# hf: the open html file pointer +# testruns: array of Data objects from parseKernelLog or parseTraceLog +def addScriptCode(hf, testruns): + t0 = testruns[0].start * 1000 + tMax = testruns[-1].end * 1000 + # create an array in javascript memory with the device details + detail = ' var devtable = [];\n' + for data in testruns: + topo = data.deviceTopology() + detail += ' devtable[%d] = "%s";\n' % (data.testnumber, topo) + detail += ' var bounds = [%f,%f];\n' % (t0, tMax) + # add the code which will manipulate the data in the browser + script_code = \ + '<script type="text/javascript">\n'+detail+\ + ' var resolution = -1;\n'\ + ' var dragval = [0, 0];\n'\ + ' function redrawTimescale(t0, tMax, tS) {\n'\ + ' var rline = \'<div class="t" style="left:0;border-left:1px solid black;border-right:0;">\';\n'\ + ' var tTotal = tMax - t0;\n'\ + ' var list = document.getElementsByClassName("tblock");\n'\ + ' for (var i = 0; i < list.length; i++) {\n'\ + ' var timescale = list[i].getElementsByClassName("timescale")[0];\n'\ + ' var m0 = t0 + (tTotal*parseFloat(list[i].style.left)/100);\n'\ + ' var mTotal = tTotal*parseFloat(list[i].style.width)/100;\n'\ + ' var mMax = m0 + mTotal;\n'\ + ' var html = "";\n'\ + ' var divTotal = Math.floor(mTotal/tS) + 1;\n'\ + ' if(divTotal > 1000) continue;\n'\ + ' var divEdge = (mTotal - tS*(divTotal-1))*100/mTotal;\n'\ + ' var pos = 0.0, val = 0.0;\n'\ + ' for (var j = 0; j < divTotal; j++) {\n'\ + ' var htmlline = "";\n'\ + ' var mode = list[i].id[5];\n'\ + ' if(mode == "s") {\n'\ + ' pos = 100 - (((j)*tS*100)/mTotal) - divEdge;\n'\ + ' val = (j-divTotal+1)*tS;\n'\ + ' if(j == divTotal - 1)\n'\ + ' htmlline = \'<div class="t" style="right:\'+pos+\'%"><cS>S→</cS></div>\';\n'\ + ' else\n'\ + ' htmlline = \'<div class="t" style="right:\'+pos+\'%">\'+val+\'ms</div>\';\n'\ + ' } else {\n'\ + ' pos = 100 - (((j)*tS*100)/mTotal);\n'\ + ' val = (j)*tS;\n'\ + ' htmlline = \'<div class="t" style="right:\'+pos+\'%">\'+val+\'ms</div>\';\n'\ + ' if(j == 0)\n'\ + ' if(mode == "r")\n'\ + ' htmlline = rline+"<cS>←R</cS></div>";\n'\ + ' else\n'\ + ' htmlline = rline+"<cS>0ms</div>";\n'\ + ' }\n'\ + ' html += htmlline;\n'\ + ' }\n'\ + ' timescale.innerHTML = html;\n'\ + ' }\n'\ + ' }\n'\ + ' function zoomTimeline() {\n'\ + ' var dmesg = document.getElementById("dmesg");\n'\ + ' var zoombox = document.getElementById("dmesgzoombox");\n'\ + ' var left = zoombox.scrollLeft;\n'\ + ' var val = parseFloat(dmesg.style.width);\n'\ + ' var newval = 100;\n'\ + ' var sh = window.outerWidth / 2;\n'\ + ' if(this.id == "zoomin") {\n'\ + ' newval = val * 1.2;\n'\ + ' if(newval > 910034) newval = 910034;\n'\ + ' dmesg.style.width = newval+"%";\n'\ + ' zoombox.scrollLeft = ((left + sh) * newval / val) - sh;\n'\ + ' } else if (this.id == "zoomout") {\n'\ + ' newval = val / 1.2;\n'\ + ' if(newval < 100) newval = 100;\n'\ + ' dmesg.style.width = newval+"%";\n'\ + ' zoombox.scrollLeft = ((left + sh) * newval / val) - sh;\n'\ + ' } else {\n'\ + ' zoombox.scrollLeft = 0;\n'\ + ' dmesg.style.width = "100%";\n'\ + ' }\n'\ + ' var tS = [10000, 5000, 2000, 1000, 500, 200, 100, 50, 20, 10, 5, 2, 1];\n'\ + ' var t0 = bounds[0];\n'\ + ' var tMax = bounds[1];\n'\ + ' var tTotal = tMax - t0;\n'\ + ' var wTotal = tTotal * 100.0 / newval;\n'\ + ' var idx = 7*window.innerWidth/1100;\n'\ + ' for(var i = 0; (i < tS.length)&&((wTotal / tS[i]) < idx); i++);\n'\ + ' if(i >= tS.length) i = tS.length - 1;\n'\ + ' if(tS[i] == resolution) return;\n'\ + ' resolution = tS[i];\n'\ + ' redrawTimescale(t0, tMax, tS[i]);\n'\ + ' }\n'\ + ' function deviceName(title) {\n'\ + ' var name = title.slice(0, title.indexOf(" ("));\n'\ + ' return name;\n'\ + ' }\n'\ + ' function deviceHover() {\n'\ + ' var name = deviceName(this.title);\n'\ + ' var dmesg = document.getElementById("dmesg");\n'\ + ' var dev = dmesg.getElementsByClassName("thread");\n'\ + ' var cpu = -1;\n'\ + ' if(name.match("CPU_ON\[[0-9]*\]"))\n'\ + ' cpu = parseInt(name.slice(7));\n'\ + ' else if(name.match("CPU_OFF\[[0-9]*\]"))\n'\ + ' cpu = parseInt(name.slice(8));\n'\ + ' for (var i = 0; i < dev.length; i++) {\n'\ + ' dname = deviceName(dev[i].title);\n'\ + ' var cname = dev[i].className.slice(dev[i].className.indexOf("thread"));\n'\ + ' if((cpu >= 0 && dname.match("CPU_O[NF]*\\\[*"+cpu+"\\\]")) ||\n'\ + ' (name == dname))\n'\ + ' {\n'\ + ' dev[i].className = "hover "+cname;\n'\ + ' } else {\n'\ + ' dev[i].className = cname;\n'\ + ' }\n'\ + ' }\n'\ + ' }\n'\ + ' function deviceUnhover() {\n'\ + ' var dmesg = document.getElementById("dmesg");\n'\ + ' var dev = dmesg.getElementsByClassName("thread");\n'\ + ' for (var i = 0; i < dev.length; i++) {\n'\ + ' dev[i].className = dev[i].className.slice(dev[i].className.indexOf("thread"));\n'\ + ' }\n'\ + ' }\n'\ + ' function deviceTitle(title, total, cpu) {\n'\ + ' var prefix = "Total";\n'\ + ' if(total.length > 3) {\n'\ + ' prefix = "Average";\n'\ + ' total[1] = (total[1]+total[3])/2;\n'\ + ' total[2] = (total[2]+total[4])/2;\n'\ + ' }\n'\ + ' var devtitle = document.getElementById("devicedetailtitle");\n'\ + ' var name = deviceName(title);\n'\ + ' if(cpu >= 0) name = "CPU"+cpu;\n'\ + ' var driver = "";\n'\ + ' var tS = "<t2>(</t2>";\n'\ + ' var tR = "<t2>)</t2>";\n'\ + ' if(total[1] > 0)\n'\ + ' tS = "<t2>("+prefix+" Suspend:</t2><t0> "+total[1].toFixed(3)+" ms</t0> ";\n'\ + ' if(total[2] > 0)\n'\ + ' tR = " <t2>"+prefix+" Resume:</t2><t0> "+total[2].toFixed(3)+" ms<t2>)</t2></t0>";\n'\ + ' var s = title.indexOf("{");\n'\ + ' var e = title.indexOf("}");\n'\ + ' if((s >= 0) && (e >= 0))\n'\ + ' driver = title.slice(s+1, e) + " <t1>@</t1> ";\n'\ + ' if(total[1] > 0 && total[2] > 0)\n'\ + ' devtitle.innerHTML = "<t0>"+driver+name+"</t0> "+tS+tR;\n'\ + ' else\n'\ + ' devtitle.innerHTML = "<t0>"+title+"</t0>";\n'\ + ' return name;\n'\ + ' }\n'\ + ' function deviceDetail() {\n'\ + ' var devinfo = document.getElementById("devicedetail");\n'\ + ' devinfo.style.display = "block";\n'\ + ' var name = deviceName(this.title);\n'\ + ' var cpu = -1;\n'\ + ' if(name.match("CPU_ON\[[0-9]*\]"))\n'\ + ' cpu = parseInt(name.slice(7));\n'\ + ' else if(name.match("CPU_OFF\[[0-9]*\]"))\n'\ + ' cpu = parseInt(name.slice(8));\n'\ + ' var dmesg = document.getElementById("dmesg");\n'\ + ' var dev = dmesg.getElementsByClassName("thread");\n'\ + ' var idlist = [];\n'\ + ' var pdata = [[]];\n'\ + ' if(document.getElementById("devicedetail1"))\n'\ + ' pdata = [[], []];\n'\ + ' var pd = pdata[0];\n'\ + ' var total = [0.0, 0.0, 0.0];\n'\ + ' for (var i = 0; i < dev.length; i++) {\n'\ + ' dname = deviceName(dev[i].title);\n'\ + ' if((cpu >= 0 && dname.match("CPU_O[NF]*\\\[*"+cpu+"\\\]")) ||\n'\ + ' (name == dname))\n'\ + ' {\n'\ + ' idlist[idlist.length] = dev[i].id;\n'\ + ' var tidx = 1;\n'\ + ' if(dev[i].id[0] == "a") {\n'\ + ' pd = pdata[0];\n'\ + ' } else {\n'\ + ' if(pdata.length == 1) pdata[1] = [];\n'\ + ' if(total.length == 3) total[3]=total[4]=0.0;\n'\ + ' pd = pdata[1];\n'\ + ' tidx = 3;\n'\ + ' }\n'\ + ' var info = dev[i].title.split(" ");\n'\ + ' var pname = info[info.length-1];\n'\ + ' pd[pname] = parseFloat(info[info.length-3].slice(1));\n'\ + ' total[0] += pd[pname];\n'\ + ' if(pname.indexOf("suspend") >= 0)\n'\ + ' total[tidx] += pd[pname];\n'\ + ' else\n'\ + ' total[tidx+1] += pd[pname];\n'\ + ' }\n'\ + ' }\n'\ + ' var devname = deviceTitle(this.title, total, cpu);\n'\ + ' var left = 0.0;\n'\ + ' for (var t = 0; t < pdata.length; t++) {\n'\ + ' pd = pdata[t];\n'\ + ' devinfo = document.getElementById("devicedetail"+t);\n'\ + ' var phases = devinfo.getElementsByClassName("phaselet");\n'\ + ' for (var i = 0; i < phases.length; i++) {\n'\ + ' if(phases[i].id in pd) {\n'\ + ' var w = 100.0*pd[phases[i].id]/total[0];\n'\ + ' var fs = 32;\n'\ + ' if(w < 8) fs = 4*w | 0;\n'\ + ' var fs2 = fs*3/4;\n'\ + ' phases[i].style.width = w+"%";\n'\ + ' phases[i].style.left = left+"%";\n'\ + ' phases[i].title = phases[i].id+" "+pd[phases[i].id]+" ms";\n'\ + ' left += w;\n'\ + ' var time = "<t4 style=\\"font-size:"+fs+"px\\">"+pd[phases[i].id]+" ms<br></t4>";\n'\ + ' var pname = "<t3 style=\\"font-size:"+fs2+"px\\">"+phases[i].id.replace(new RegExp("_", "g"), " ")+"</t3>";\n'\ + ' phases[i].innerHTML = time+pname;\n'\ + ' } else {\n'\ + ' phases[i].style.width = "0%";\n'\ + ' phases[i].style.left = left+"%";\n'\ + ' }\n'\ + ' }\n'\ + ' }\n'\ + ' if(typeof devstats !== \'undefined\')\n'\ + ' callDetail(this.id, this.title);\n'\ + ' var cglist = document.getElementById("callgraphs");\n'\ + ' if(!cglist) return;\n'\ + ' var cg = cglist.getElementsByClassName("atop");\n'\ + ' if(cg.length < 10) return;\n'\ + ' for (var i = 0; i < cg.length; i++) {\n'\ + ' cgid = cg[i].id.split("x")[0]\n'\ + ' if(idlist.indexOf(cgid) >= 0) {\n'\ + ' cg[i].style.display = "block";\n'\ + ' } else {\n'\ + ' cg[i].style.display = "none";\n'\ + ' }\n'\ + ' }\n'\ + ' }\n'\ + ' function callDetail(devid, devtitle) {\n'\ + ' if(!(devid in devstats) || devstats[devid].length < 1)\n'\ + ' return;\n'\ + ' var list = devstats[devid];\n'\ + ' var tmp = devtitle.split(" ");\n'\ + ' var name = tmp[0], phase = tmp[tmp.length-1];\n'\ + ' var dd = document.getElementById(phase);\n'\ + ' var total = parseFloat(tmp[1].slice(1));\n'\ + ' var mlist = [];\n'\ + ' var maxlen = 0;\n'\ + ' var info = []\n'\ + ' for(var i in list) {\n'\ + ' if(list[i][0] == "@") {\n'\ + ' info = list[i].split("|");\n'\ + ' continue;\n'\ + ' }\n'\ + ' var tmp = list[i].split("|");\n'\ + ' var t = parseFloat(tmp[0]), f = tmp[1], c = parseInt(tmp[2]);\n'\ + ' var p = (t*100.0/total).toFixed(2);\n'\ + ' mlist[mlist.length] = [f, c, t.toFixed(2), p+"%"];\n'\ + ' if(f.length > maxlen)\n'\ + ' maxlen = f.length;\n'\ + ' }\n'\ + ' var pad = 5;\n'\ + ' if(mlist.length == 0) pad = 30;\n'\ + ' var html = \'<div style="padding-top:\'+pad+\'px"><t3> <b>\'+name+\':</b>\';\n'\ + ' if(info.length > 2)\n'\ + ' html += " start=<b>"+info[1]+"</b>, end=<b>"+info[2]+"</b>";\n'\ + ' if(info.length > 3)\n'\ + ' html += ", length<i>(w/o overhead)</i>=<b>"+info[3]+" ms</b>";\n'\ + ' if(info.length > 4)\n'\ + ' html += ", return=<b>"+info[4]+"</b>";\n'\ + ' html += "</t3></div>";\n'\ + ' if(mlist.length > 0) {\n'\ + ' html += \'<table class=fstat style="padding-top:\'+(maxlen*5)+\'px;"><tr><th>Function</th>\';\n'\ + ' for(var i in mlist)\n'\ + ' html += "<td class=vt>"+mlist[i][0]+"</td>";\n'\ + ' html += "</tr><tr><th>Calls</th>";\n'\ + ' for(var i in mlist)\n'\ + ' html += "<td>"+mlist[i][1]+"</td>";\n'\ + ' html += "</tr><tr><th>Time(ms)</th>";\n'\ + ' for(var i in mlist)\n'\ + ' html += "<td>"+mlist[i][2]+"</td>";\n'\ + ' html += "</tr><tr><th>Percent</th>";\n'\ + ' for(var i in mlist)\n'\ + ' html += "<td>"+mlist[i][3]+"</td>";\n'\ + ' html += "</tr></table>";\n'\ + ' }\n'\ + ' dd.innerHTML = html;\n'\ + ' var height = (maxlen*5)+100;\n'\ + ' dd.style.height = height+"px";\n'\ + ' document.getElementById("devicedetail").style.height = height+"px";\n'\ + ' }\n'\ + ' function callSelect() {\n'\ + ' var cglist = document.getElementById("callgraphs");\n'\ + ' if(!cglist) return;\n'\ + ' var cg = cglist.getElementsByClassName("atop");\n'\ + ' for (var i = 0; i < cg.length; i++) {\n'\ + ' if(this.id == cg[i].id) {\n'\ + ' cg[i].style.display = "block";\n'\ + ' } else {\n'\ + ' cg[i].style.display = "none";\n'\ + ' }\n'\ + ' }\n'\ + ' }\n'\ + ' function devListWindow(e) {\n'\ + ' var win = window.open();\n'\ + ' var html = "<title>"+e.target.innerHTML+"</title>"+\n'\ + ' "<style type=\\"text/css\\">"+\n'\ + ' " ul {list-style-type:circle;padding-left:10px;margin-left:10px;}"+\n'\ + ' "</style>"\n'\ + ' var dt = devtable[0];\n'\ + ' if(e.target.id != "devlist1")\n'\ + ' dt = devtable[1];\n'\ + ' win.document.write(html+dt);\n'\ + ' }\n'\ + ' function errWindow() {\n'\ + ' var range = this.id.split("_");\n'\ + ' var idx1 = parseInt(range[0]);\n'\ + ' var idx2 = parseInt(range[1]);\n'\ + ' var win = window.open();\n'\ + ' var log = document.getElementById("dmesglog");\n'\ + ' var title = "<title>dmesg log</title>";\n'\ + ' var text = log.innerHTML.split("\\n");\n'\ + ' var html = "";\n'\ + ' for(var i = 0; i < text.length; i++) {\n'\ + ' if(i == idx1) {\n'\ + ' html += "<e id=target>"+text[i]+"</e>\\n";\n'\ + ' } else if(i > idx1 && i <= idx2) {\n'\ + ' html += "<e>"+text[i]+"</e>\\n";\n'\ + ' } else {\n'\ + ' html += text[i]+"\\n";\n'\ + ' }\n'\ + ' }\n'\ + ' win.document.write("<style>e{color:red}</style>"+title+"<pre>"+html+"</pre>");\n'\ + ' win.location.hash = "#target";\n'\ + ' win.document.close();\n'\ + ' }\n'\ + ' function logWindow(e) {\n'\ + ' var name = e.target.id.slice(4);\n'\ + ' var win = window.open();\n'\ + ' var log = document.getElementById(name+"log");\n'\ + ' var title = "<title>"+document.title.split(" ")[0]+" "+name+" log</title>";\n'\ + ' win.document.write(title+"<pre>"+log.innerHTML+"</pre>");\n'\ + ' win.document.close();\n'\ + ' }\n'\ + ' function onMouseDown(e) {\n'\ + ' dragval[0] = e.clientX;\n'\ + ' dragval[1] = document.getElementById("dmesgzoombox").scrollLeft;\n'\ + ' document.onmousemove = onMouseMove;\n'\ + ' }\n'\ + ' function onMouseMove(e) {\n'\ + ' var zoombox = document.getElementById("dmesgzoombox");\n'\ + ' zoombox.scrollLeft = dragval[1] + dragval[0] - e.clientX;\n'\ + ' }\n'\ + ' function onMouseUp(e) {\n'\ + ' document.onmousemove = null;\n'\ + ' }\n'\ + ' function onKeyPress(e) {\n'\ + ' var c = e.charCode;\n'\ + ' if(c != 42 && c != 43 && c != 45) return;\n'\ + ' var click = document.createEvent("Events");\n'\ + ' click.initEvent("click", true, false);\n'\ + ' if(c == 43) \n'\ + ' document.getElementById("zoomin").dispatchEvent(click);\n'\ + ' else if(c == 45)\n'\ + ' document.getElementById("zoomout").dispatchEvent(click);\n'\ + ' else if(c == 42)\n'\ + ' document.getElementById("zoomdef").dispatchEvent(click);\n'\ + ' }\n'\ + ' window.addEventListener("resize", function () {zoomTimeline();});\n'\ + ' window.addEventListener("load", function () {\n'\ + ' var dmesg = document.getElementById("dmesg");\n'\ + ' dmesg.style.width = "100%"\n'\ + ' dmesg.onmousedown = onMouseDown;\n'\ + ' document.onmouseup = onMouseUp;\n'\ + ' document.onkeypress = onKeyPress;\n'\ + ' document.getElementById("zoomin").onclick = zoomTimeline;\n'\ + ' document.getElementById("zoomout").onclick = zoomTimeline;\n'\ + ' document.getElementById("zoomdef").onclick = zoomTimeline;\n'\ + ' var list = document.getElementsByClassName("err");\n'\ + ' for (var i = 0; i < list.length; i++)\n'\ + ' list[i].onclick = errWindow;\n'\ + ' var list = document.getElementsByClassName("logbtn");\n'\ + ' for (var i = 0; i < list.length; i++)\n'\ + ' list[i].onclick = logWindow;\n'\ + ' list = document.getElementsByClassName("devlist");\n'\ + ' for (var i = 0; i < list.length; i++)\n'\ + ' list[i].onclick = devListWindow;\n'\ + ' var dev = dmesg.getElementsByClassName("thread");\n'\ + ' for (var i = 0; i < dev.length; i++) {\n'\ + ' dev[i].onclick = deviceDetail;\n'\ + ' dev[i].onmouseover = deviceHover;\n'\ + ' dev[i].onmouseout = deviceUnhover;\n'\ + ' }\n'\ + ' var dev = dmesg.getElementsByClassName("srccall");\n'\ + ' for (var i = 0; i < dev.length; i++)\n'\ + ' dev[i].onclick = callSelect;\n'\ + ' zoomTimeline();\n'\ + ' });\n'\ + '</script>\n' + hf.write(script_code); + +def setRuntimeSuspend(before=True): + global sysvals + sv = sysvals + if sv.rs == 0: + return + if before: + # runtime suspend disable or enable + if sv.rs > 0: + sv.rstgt, sv.rsval, sv.rsdir = 'on', 'auto', 'enabled' + else: + sv.rstgt, sv.rsval, sv.rsdir = 'auto', 'on', 'disabled' + pprint('CONFIGURING RUNTIME SUSPEND...') + sv.rslist = deviceInfo(sv.rstgt) + for i in sv.rslist: + sv.setVal(sv.rsval, i) + pprint('runtime suspend %s on all devices (%d changed)' % (sv.rsdir, len(sv.rslist))) + pprint('waiting 5 seconds...') + time.sleep(5) + else: + # runtime suspend re-enable or re-disable + for i in sv.rslist: + sv.setVal(sv.rstgt, i) + pprint('runtime suspend settings restored on %d devices' % len(sv.rslist)) + +# Function: executeSuspend +# Description: +# Execute system suspend through the sysfs interface, then copy the output +# dmesg and ftrace files to the test output directory. +def executeSuspend(quiet=False): + pm = ProcessMonitor() + tp = sysvals.tpath + if sysvals.wifi: + wifi = sysvals.checkWifi() + testdata = [] + # run these commands to prepare the system for suspend + if sysvals.display: + if not quiet: + pprint('SET DISPLAY TO %s' % sysvals.display.upper()) + displayControl(sysvals.display) + time.sleep(1) + if sysvals.sync: + if not quiet: + pprint('SYNCING FILESYSTEMS') + call('sync', shell=True) + # mark the start point in the kernel ring buffer just as we start + sysvals.initdmesg() + # start ftrace + if(sysvals.usecallgraph or sysvals.usetraceevents): + if not quiet: + pprint('START TRACING') + sysvals.fsetVal('1', 'tracing_on') + if sysvals.useprocmon: + pm.start() + sysvals.cmdinfo(True) + # execute however many s/r runs requested + for count in range(1,sysvals.execcount+1): + # x2delay in between test runs + if(count > 1 and sysvals.x2delay > 0): + sysvals.fsetVal('WAIT %d' % sysvals.x2delay, 'trace_marker') + time.sleep(sysvals.x2delay/1000.0) + sysvals.fsetVal('WAIT END', 'trace_marker') + # start message + if sysvals.testcommand != '': + pprint('COMMAND START') + else: + if(sysvals.rtcwake): + pprint('SUSPEND START') + else: + pprint('SUSPEND START (press a key to resume)') + # set rtcwake + if(sysvals.rtcwake): + if not quiet: + pprint('will issue an rtcwake in %d seconds' % sysvals.rtcwaketime) + sysvals.rtcWakeAlarmOn() + # start of suspend trace marker + if(sysvals.usecallgraph or sysvals.usetraceevents): + sysvals.fsetVal(datetime.now().strftime(sysvals.tmstart), 'trace_marker') + # predelay delay + if(count == 1 and sysvals.predelay > 0): + sysvals.fsetVal('WAIT %d' % sysvals.predelay, 'trace_marker') + time.sleep(sysvals.predelay/1000.0) + sysvals.fsetVal('WAIT END', 'trace_marker') + # initiate suspend or command + tdata = {'error': ''} + if sysvals.testcommand != '': + res = call(sysvals.testcommand+' 2>&1', shell=True); + if res != 0: + tdata['error'] = 'cmd returned %d' % res + else: + mode = sysvals.suspendmode + if sysvals.memmode and os.path.exists(sysvals.mempowerfile): + mode = 'mem' + pf = open(sysvals.mempowerfile, 'w') + pf.write(sysvals.memmode) + pf.close() + if sysvals.diskmode and os.path.exists(sysvals.diskpowerfile): + mode = 'disk' + pf = open(sysvals.diskpowerfile, 'w') + pf.write(sysvals.diskmode) + pf.close() + if mode == 'freeze' and sysvals.haveTurbostat(): + # execution will pause here + turbo = sysvals.turbostat() + if turbo: + tdata['turbo'] = turbo + else: + pf = open(sysvals.powerfile, 'w') + pf.write(mode) + # execution will pause here + try: + pf.close() + except Exception as e: + tdata['error'] = str(e) + if(sysvals.rtcwake): + sysvals.rtcWakeAlarmOff() + # postdelay delay + if(count == sysvals.execcount and sysvals.postdelay > 0): + sysvals.fsetVal('WAIT %d' % sysvals.postdelay, 'trace_marker') + time.sleep(sysvals.postdelay/1000.0) + sysvals.fsetVal('WAIT END', 'trace_marker') + # return from suspend + pprint('RESUME COMPLETE') + if(sysvals.usecallgraph or sysvals.usetraceevents): + sysvals.fsetVal(datetime.now().strftime(sysvals.tmend), 'trace_marker') + if sysvals.wifi and wifi: + tdata['wifi'] = sysvals.pollWifi(wifi) + if(sysvals.suspendmode == 'mem' or sysvals.suspendmode == 'command'): + tdata['fw'] = getFPDT(False) + testdata.append(tdata) + cmdafter = sysvals.cmdinfo(False) + # stop ftrace + if(sysvals.usecallgraph or sysvals.usetraceevents): + if sysvals.useprocmon: + pm.stop() + sysvals.fsetVal('0', 'tracing_on') + # grab a copy of the dmesg output + if not quiet: + pprint('CAPTURING DMESG') + sysvals.getdmesg(testdata) + # grab a copy of the ftrace output + if(sysvals.usecallgraph or sysvals.usetraceevents): + if not quiet: + pprint('CAPTURING TRACE') + op = sysvals.writeDatafileHeader(sysvals.ftracefile, testdata) + fp = open(tp+'trace', 'r') + for line in fp: + op.write(line) + op.close() + sysvals.fsetVal('', 'trace') + sysvals.platforminfo(cmdafter) + +def readFile(file): + if os.path.islink(file): + return os.readlink(file).split('/')[-1] + else: + return sysvals.getVal(file).strip() + +# Function: ms2nice +# Description: +# Print out a very concise time string in minutes and seconds +# Output: +# The time string, e.g. "1901m16s" +def ms2nice(val): + val = int(val) + h = val // 3600000 + m = (val // 60000) % 60 + s = (val // 1000) % 60 + if h > 0: + return '%d:%02d:%02d' % (h, m, s) + if m > 0: + return '%02d:%02d' % (m, s) + return '%ds' % s + +def yesno(val): + list = {'enabled':'A', 'disabled':'S', 'auto':'E', 'on':'D', + 'active':'A', 'suspended':'S', 'suspending':'S'} + if val not in list: + return ' ' + return list[val] + +# Function: deviceInfo +# Description: +# Detect all the USB hosts and devices currently connected and add +# a list of USB device names to sysvals for better timeline readability +def deviceInfo(output=''): + if not output: + pprint('LEGEND\n'\ + '---------------------------------------------------------------------------------------------\n'\ + ' A = async/sync PM queue (A/S) C = runtime active children\n'\ + ' R = runtime suspend enabled/disabled (E/D) rACTIVE = runtime active (min/sec)\n'\ + ' S = runtime status active/suspended (A/S) rSUSPEND = runtime suspend (min/sec)\n'\ + ' U = runtime usage count\n'\ + '---------------------------------------------------------------------------------------------\n'\ + 'DEVICE NAME A R S U C rACTIVE rSUSPEND\n'\ + '---------------------------------------------------------------------------------------------') + + res = [] + tgtval = 'runtime_status' + lines = dict() + for dirname, dirnames, filenames in os.walk('/sys/devices'): + if(not re.match('.*/power', dirname) or + 'control' not in filenames or + tgtval not in filenames): + continue + name = '' + dirname = dirname[:-6] + device = dirname.split('/')[-1] + power = dict() + power[tgtval] = readFile('%s/power/%s' % (dirname, tgtval)) + # only list devices which support runtime suspend + if power[tgtval] not in ['active', 'suspended', 'suspending']: + continue + for i in ['product', 'driver', 'subsystem']: + file = '%s/%s' % (dirname, i) + if os.path.exists(file): + name = readFile(file) + break + for i in ['async', 'control', 'runtime_status', 'runtime_usage', + 'runtime_active_kids', 'runtime_active_time', + 'runtime_suspended_time']: + if i in filenames: + power[i] = readFile('%s/power/%s' % (dirname, i)) + if output: + if power['control'] == output: + res.append('%s/power/control' % dirname) + continue + lines[dirname] = '%-26s %-26s %1s %1s %1s %1s %1s %10s %10s' % \ + (device[:26], name[:26], + yesno(power['async']), \ + yesno(power['control']), \ + yesno(power['runtime_status']), \ + power['runtime_usage'], \ + power['runtime_active_kids'], \ + ms2nice(power['runtime_active_time']), \ + ms2nice(power['runtime_suspended_time'])) + for i in sorted(lines): + print(lines[i]) + return res + +# Function: getModes +# Description: +# Determine the supported power modes on this system +# Output: +# A string list of the available modes +def getModes(): + modes = [] + if(os.path.exists(sysvals.powerfile)): + fp = open(sysvals.powerfile, 'r') + modes = fp.read().split() + fp.close() + if(os.path.exists(sysvals.mempowerfile)): + deep = False + fp = open(sysvals.mempowerfile, 'r') + for m in fp.read().split(): + memmode = m.strip('[]') + if memmode == 'deep': + deep = True + else: + modes.append('mem-%s' % memmode) + fp.close() + if 'mem' in modes and not deep: + modes.remove('mem') + if('disk' in modes and os.path.exists(sysvals.diskpowerfile)): + fp = open(sysvals.diskpowerfile, 'r') + for m in fp.read().split(): + modes.append('disk-%s' % m.strip('[]')) + fp.close() + return modes + +# Function: dmidecode +# Description: +# Read the bios tables and pull out system info +# Arguments: +# mempath: /dev/mem or custom mem path +# fatal: True to exit on error, False to return empty dict +# Output: +# A dict object with all available key/values +def dmidecode(mempath, fatal=False): + out = dict() + + # the list of values to retrieve, with hardcoded (type, idx) + info = { + 'bios-vendor': (0, 4), + 'bios-version': (0, 5), + 'bios-release-date': (0, 8), + 'system-manufacturer': (1, 4), + 'system-product-name': (1, 5), + 'system-version': (1, 6), + 'system-serial-number': (1, 7), + 'baseboard-manufacturer': (2, 4), + 'baseboard-product-name': (2, 5), + 'baseboard-version': (2, 6), + 'baseboard-serial-number': (2, 7), + 'chassis-manufacturer': (3, 4), + 'chassis-type': (3, 5), + 'chassis-version': (3, 6), + 'chassis-serial-number': (3, 7), + 'processor-manufacturer': (4, 7), + 'processor-version': (4, 16), + } + if(not os.path.exists(mempath)): + if(fatal): + doError('file does not exist: %s' % mempath) + return out + if(not os.access(mempath, os.R_OK)): + if(fatal): + doError('file is not readable: %s' % mempath) + return out + + # by default use legacy scan, but try to use EFI first + memaddr = 0xf0000 + memsize = 0x10000 + for ep in ['/sys/firmware/efi/systab', '/proc/efi/systab']: + if not os.path.exists(ep) or not os.access(ep, os.R_OK): + continue + fp = open(ep, 'r') + buf = fp.read() + fp.close() + i = buf.find('SMBIOS=') + if i >= 0: + try: + memaddr = int(buf[i+7:], 16) + memsize = 0x20 + except: + continue + + # read in the memory for scanning + try: + fp = open(mempath, 'rb') + fp.seek(memaddr) + buf = fp.read(memsize) + except: + if(fatal): + doError('DMI table is unreachable, sorry') + else: + pprint('WARNING: /dev/mem is not readable, ignoring DMI data') + return out + fp.close() + + # search for either an SM table or DMI table + i = base = length = num = 0 + while(i < memsize): + if buf[i:i+4] == b'_SM_' and i < memsize - 16: + length = struct.unpack('H', buf[i+22:i+24])[0] + base, num = struct.unpack('IH', buf[i+24:i+30]) + break + elif buf[i:i+5] == b'_DMI_': + length = struct.unpack('H', buf[i+6:i+8])[0] + base, num = struct.unpack('IH', buf[i+8:i+14]) + break + i += 16 + if base == 0 and length == 0 and num == 0: + if(fatal): + doError('Neither SMBIOS nor DMI were found') + else: + return out + + # read in the SM or DMI table + try: + fp = open(mempath, 'rb') + fp.seek(base) + buf = fp.read(length) + except: + if(fatal): + doError('DMI table is unreachable, sorry') + else: + pprint('WARNING: /dev/mem is not readable, ignoring DMI data') + return out + fp.close() + + # scan the table for the values we want + count = i = 0 + while(count < num and i <= len(buf) - 4): + type, size, handle = struct.unpack('BBH', buf[i:i+4]) + n = i + size + while n < len(buf) - 1: + if 0 == struct.unpack('H', buf[n:n+2])[0]: + break + n += 1 + data = buf[i+size:n+2].split(b'\0') + for name in info: + itype, idxadr = info[name] + if itype == type: + idx = struct.unpack('B', buf[i+idxadr:i+idxadr+1])[0] + if idx > 0 and idx < len(data) - 1: + s = data[idx-1].decode('utf-8') + if s.strip() and s.strip().lower() != 'to be filled by o.e.m.': + out[name] = s + i = n + 2 + count += 1 + return out + +def displayControl(cmd): + xset, ret = 'timeout 10 xset -d :0.0 {0}', 0 + if sysvals.sudouser: + xset = 'sudo -u %s %s' % (sysvals.sudouser, xset) + if cmd == 'init': + ret = call(xset.format('dpms 0 0 0'), shell=True) + if not ret: + ret = call(xset.format('s off'), shell=True) + elif cmd == 'reset': + ret = call(xset.format('s reset'), shell=True) + elif cmd in ['on', 'off', 'standby', 'suspend']: + b4 = displayControl('stat') + ret = call(xset.format('dpms force %s' % cmd), shell=True) + if not ret: + curr = displayControl('stat') + sysvals.vprint('Display Switched: %s -> %s' % (b4, curr)) + if curr != cmd: + sysvals.vprint('WARNING: Display failed to change to %s' % cmd) + if ret: + sysvals.vprint('WARNING: Display failed to change to %s with xset' % cmd) + return ret + elif cmd == 'stat': + fp = Popen(xset.format('q').split(' '), stdout=PIPE).stdout + ret = 'unknown' + for line in fp: + m = re.match('[\s]*Monitor is (?P<m>.*)', ascii(line)) + if(m and len(m.group('m')) >= 2): + out = m.group('m').lower() + ret = out[3:] if out[0:2] == 'in' else out + break + fp.close() + return ret + +# Function: getFPDT +# Description: +# Read the acpi bios tables and pull out FPDT, the firmware data +# Arguments: +# output: True to output the info to stdout, False otherwise +def getFPDT(output): + rectype = {} + rectype[0] = 'Firmware Basic Boot Performance Record' + rectype[1] = 'S3 Performance Table Record' + prectype = {} + prectype[0] = 'Basic S3 Resume Performance Record' + prectype[1] = 'Basic S3 Suspend Performance Record' + + sysvals.rootCheck(True) + if(not os.path.exists(sysvals.fpdtpath)): + if(output): + doError('file does not exist: %s' % sysvals.fpdtpath) + return False + if(not os.access(sysvals.fpdtpath, os.R_OK)): + if(output): + doError('file is not readable: %s' % sysvals.fpdtpath) + return False + if(not os.path.exists(sysvals.mempath)): + if(output): + doError('file does not exist: %s' % sysvals.mempath) + return False + if(not os.access(sysvals.mempath, os.R_OK)): + if(output): + doError('file is not readable: %s' % sysvals.mempath) + return False + + fp = open(sysvals.fpdtpath, 'rb') + buf = fp.read() + fp.close() + + if(len(buf) < 36): + if(output): + doError('Invalid FPDT table data, should '+\ + 'be at least 36 bytes') + return False + + table = struct.unpack('4sIBB6s8sI4sI', buf[0:36]) + if(output): + pprint('\n'\ + 'Firmware Performance Data Table (%s)\n'\ + ' Signature : %s\n'\ + ' Table Length : %u\n'\ + ' Revision : %u\n'\ + ' Checksum : 0x%x\n'\ + ' OEM ID : %s\n'\ + ' OEM Table ID : %s\n'\ + ' OEM Revision : %u\n'\ + ' Creator ID : %s\n'\ + ' Creator Revision : 0x%x\n'\ + '' % (ascii(table[0]), ascii(table[0]), table[1], table[2], + table[3], ascii(table[4]), ascii(table[5]), table[6], + ascii(table[7]), table[8])) + + if(table[0] != b'FPDT'): + if(output): + doError('Invalid FPDT table') + return False + if(len(buf) <= 36): + return False + i = 0 + fwData = [0, 0] + records = buf[36:] + try: + fp = open(sysvals.mempath, 'rb') + except: + pprint('WARNING: /dev/mem is not readable, ignoring the FPDT data') + return False + while(i < len(records)): + header = struct.unpack('HBB', records[i:i+4]) + if(header[0] not in rectype): + i += header[1] + continue + if(header[1] != 16): + i += header[1] + continue + addr = struct.unpack('Q', records[i+8:i+16])[0] + try: + fp.seek(addr) + first = fp.read(8) + except: + if(output): + pprint('Bad address 0x%x in %s' % (addr, sysvals.mempath)) + return [0, 0] + rechead = struct.unpack('4sI', first) + recdata = fp.read(rechead[1]-8) + if(rechead[0] == b'FBPT'): + record = struct.unpack('HBBIQQQQQ', recdata[:48]) + if(output): + pprint('%s (%s)\n'\ + ' Reset END : %u ns\n'\ + ' OS Loader LoadImage Start : %u ns\n'\ + ' OS Loader StartImage Start : %u ns\n'\ + ' ExitBootServices Entry : %u ns\n'\ + ' ExitBootServices Exit : %u ns'\ + '' % (rectype[header[0]], ascii(rechead[0]), record[4], record[5], + record[6], record[7], record[8])) + elif(rechead[0] == b'S3PT'): + if(output): + pprint('%s (%s)' % (rectype[header[0]], ascii(rechead[0]))) + j = 0 + while(j < len(recdata)): + prechead = struct.unpack('HBB', recdata[j:j+4]) + if(prechead[0] not in prectype): + continue + if(prechead[0] == 0): + record = struct.unpack('IIQQ', recdata[j:j+prechead[1]]) + fwData[1] = record[2] + if(output): + pprint(' %s\n'\ + ' Resume Count : %u\n'\ + ' FullResume : %u ns\n'\ + ' AverageResume : %u ns'\ + '' % (prectype[prechead[0]], record[1], + record[2], record[3])) + elif(prechead[0] == 1): + record = struct.unpack('QQ', recdata[j+4:j+prechead[1]]) + fwData[0] = record[1] - record[0] + if(output): + pprint(' %s\n'\ + ' SuspendStart : %u ns\n'\ + ' SuspendEnd : %u ns\n'\ + ' SuspendTime : %u ns'\ + '' % (prectype[prechead[0]], record[0], + record[1], fwData[0])) + + j += prechead[1] + if(output): + pprint('') + i += header[1] + fp.close() + return fwData + +# Function: statusCheck +# Description: +# Verify that the requested command and options will work, and +# print the results to the terminal +# Output: +# True if the test will work, False if not +def statusCheck(probecheck=False): + status = '' + + pprint('Checking this system (%s)...' % platform.node()) + + # check we have root access + res = sysvals.colorText('NO (No features of this tool will work!)') + if(sysvals.rootCheck(False)): + res = 'YES' + pprint(' have root access: %s' % res) + if(res != 'YES'): + pprint(' Try running this script with sudo') + return 'missing root access' + + # check sysfs is mounted + res = sysvals.colorText('NO (No features of this tool will work!)') + if(os.path.exists(sysvals.powerfile)): + res = 'YES' + pprint(' is sysfs mounted: %s' % res) + if(res != 'YES'): + return 'sysfs is missing' + + # check target mode is a valid mode + if sysvals.suspendmode != 'command': + res = sysvals.colorText('NO') + modes = getModes() + if(sysvals.suspendmode in modes): + res = 'YES' + else: + status = '%s mode is not supported' % sysvals.suspendmode + pprint(' is "%s" a valid power mode: %s' % (sysvals.suspendmode, res)) + if(res == 'NO'): + pprint(' valid power modes are: %s' % modes) + pprint(' please choose one with -m') + + # check if ftrace is available + res = sysvals.colorText('NO') + ftgood = sysvals.verifyFtrace() + if(ftgood): + res = 'YES' + elif(sysvals.usecallgraph): + status = 'ftrace is not properly supported' + pprint(' is ftrace supported: %s' % res) + + # check if kprobes are available + if sysvals.usekprobes: + res = sysvals.colorText('NO') + sysvals.usekprobes = sysvals.verifyKprobes() + if(sysvals.usekprobes): + res = 'YES' + else: + sysvals.usedevsrc = False + pprint(' are kprobes supported: %s' % res) + + # what data source are we using + res = 'DMESG' + if(ftgood): + sysvals.usetraceevents = True + for e in sysvals.traceevents: + if not os.path.exists(sysvals.epath+e): + sysvals.usetraceevents = False + if(sysvals.usetraceevents): + res = 'FTRACE (all trace events found)' + pprint(' timeline data source: %s' % res) + + # check if rtcwake + res = sysvals.colorText('NO') + if(sysvals.rtcpath != ''): + res = 'YES' + elif(sysvals.rtcwake): + status = 'rtcwake is not properly supported' + pprint(' is rtcwake supported: %s' % res) + + # check info commands + pprint(' optional commands this tool may use for info:') + no = sysvals.colorText('MISSING') + yes = sysvals.colorText('FOUND', 32) + for c in ['turbostat', 'mcelog', 'lspci', 'lsusb']: + if c == 'turbostat': + res = yes if sysvals.haveTurbostat() else no + else: + res = yes if sysvals.getExec(c) else no + pprint(' %s: %s' % (c, res)) + + if not probecheck: + return status + + # verify kprobes + if sysvals.usekprobes: + for name in sysvals.tracefuncs: + sysvals.defaultKprobe(name, sysvals.tracefuncs[name]) + if sysvals.usedevsrc: + for name in sysvals.dev_tracefuncs: + sysvals.defaultKprobe(name, sysvals.dev_tracefuncs[name]) + sysvals.addKprobes(True) + + return status + +# Function: doError +# Description: +# generic error function for catastrphic failures +# Arguments: +# msg: the error message to print +# help: True if printHelp should be called after, False otherwise +def doError(msg, help=False): + if(help == True): + printHelp() + pprint('ERROR: %s\n' % msg) + sysvals.outputResult({'error':msg}) + sys.exit(1) + +# Function: getArgInt +# Description: +# pull out an integer argument from the command line with checks +def getArgInt(name, args, min, max, main=True): + if main: + try: + arg = next(args) + except: + doError(name+': no argument supplied', True) + else: + arg = args + try: + val = int(arg) + except: + doError(name+': non-integer value given', True) + if(val < min or val > max): + doError(name+': value should be between %d and %d' % (min, max), True) + return val + +# Function: getArgFloat +# Description: +# pull out a float argument from the command line with checks +def getArgFloat(name, args, min, max, main=True): + if main: + try: + arg = next(args) + except: + doError(name+': no argument supplied', True) + else: + arg = args + try: + val = float(arg) + except: + doError(name+': non-numerical value given', True) + if(val < min or val > max): + doError(name+': value should be between %f and %f' % (min, max), True) + return val + +def processData(live=False, quiet=False): + if not quiet: + pprint('PROCESSING: %s' % sysvals.htmlfile) + sysvals.vprint('usetraceevents=%s, usetracemarkers=%s, usekprobes=%s' % \ + (sysvals.usetraceevents, sysvals.usetracemarkers, sysvals.usekprobes)) + error = '' + if(sysvals.usetraceevents): + testruns, error = parseTraceLog(live) + if sysvals.dmesgfile: + for data in testruns: + data.extractErrorInfo() + else: + testruns = loadKernelLog() + for data in testruns: + parseKernelLog(data) + if(sysvals.ftracefile and (sysvals.usecallgraph or sysvals.usetraceevents)): + appendIncompleteTraceLog(testruns) + if not sysvals.stamp: + pprint('ERROR: data does not include the expected stamp') + return (testruns, {'error': 'timeline generation failed'}) + shown = ['bios', 'biosdate', 'cpu', 'host', 'kernel', 'man', 'memfr', + 'memsz', 'mode', 'numcpu', 'plat', 'time', 'wifi'] + sysvals.vprint('System Info:') + for key in sorted(sysvals.stamp): + if key in shown: + sysvals.vprint(' %-8s : %s' % (key.upper(), sysvals.stamp[key])) + sysvals.vprint('Command:\n %s' % sysvals.cmdline) + for data in testruns: + if data.turbostat: + idx, s = 0, 'Turbostat:\n ' + for val in data.turbostat.split('|'): + idx += len(val) + 1 + if idx >= 80: + idx = 0 + s += '\n ' + s += val + ' ' + sysvals.vprint(s) + data.printDetails() + if len(sysvals.platinfo) > 0: + sysvals.vprint('\nPlatform Info:') + for info in sysvals.platinfo: + sysvals.vprint('[%s - %s]' % (info[0], info[1])) + sysvals.vprint(info[2]) + sysvals.vprint('') + if sysvals.cgdump: + for data in testruns: + data.debugPrint() + sys.exit(0) + if len(testruns) < 1: + pprint('ERROR: Not enough test data to build a timeline') + return (testruns, {'error': 'timeline generation failed'}) + sysvals.vprint('Creating the html timeline (%s)...' % sysvals.htmlfile) + createHTML(testruns, error) + if not quiet: + pprint('DONE: %s' % sysvals.htmlfile) + data = testruns[0] + stamp = data.stamp + stamp['suspend'], stamp['resume'] = data.getTimeValues() + if data.fwValid: + stamp['fwsuspend'], stamp['fwresume'] = data.fwSuspend, data.fwResume + if error: + stamp['error'] = error + return (testruns, stamp) + +# Function: rerunTest +# Description: +# generate an output from an existing set of ftrace/dmesg logs +def rerunTest(htmlfile=''): + if sysvals.ftracefile: + doesTraceLogHaveTraceEvents() + if not sysvals.dmesgfile and not sysvals.usetraceevents: + doError('recreating this html output requires a dmesg file') + if htmlfile: + sysvals.htmlfile = htmlfile + else: + sysvals.setOutputFile() + if os.path.exists(sysvals.htmlfile): + if not os.path.isfile(sysvals.htmlfile): + doError('a directory already exists with this name: %s' % sysvals.htmlfile) + elif not os.access(sysvals.htmlfile, os.W_OK): + doError('missing permission to write to %s' % sysvals.htmlfile) + testruns, stamp = processData() + sysvals.resetlog() + return stamp + +# Function: runTest +# Description: +# execute a suspend/resume, gather the logs, and generate the output +def runTest(n=0, quiet=False): + # prepare for the test + sysvals.initFtrace(quiet) + sysvals.initTestOutput('suspend') + + # execute the test + executeSuspend(quiet) + sysvals.cleanupFtrace() + if sysvals.skiphtml: + sysvals.outputResult({}, n) + sysvals.sudoUserchown(sysvals.testdir) + return + testruns, stamp = processData(True, quiet) + for data in testruns: + del data + sysvals.sudoUserchown(sysvals.testdir) + sysvals.outputResult(stamp, n) + if 'error' in stamp: + return 2 + return 0 + +def find_in_html(html, start, end, firstonly=True): + cnt, out, list = len(html), [], [] + if firstonly: + m = re.search(start, html) + if m: + list.append(m) + else: + list = re.finditer(start, html) + for match in list: + s = match.end() + e = cnt if (len(out) < 1 or s + 10000 > cnt) else s + 10000 + m = re.search(end, html[s:e]) + if not m: + break + e = s + m.start() + str = html[s:e] + if end == 'ms': + num = re.search(r'[-+]?\d*\.\d+|\d+', str) + str = num.group() if num else 'NaN' + if firstonly: + return str + out.append(str) + if firstonly: + return '' + return out + +def data_from_html(file, outpath, issues, fulldetail=False): + html = open(file, 'r').read() + sysvals.htmlfile = os.path.relpath(file, outpath) + # extract general info + suspend = find_in_html(html, 'Kernel Suspend', 'ms') + resume = find_in_html(html, 'Kernel Resume', 'ms') + sysinfo = find_in_html(html, '<div class="stamp sysinfo">', '</div>') + line = find_in_html(html, '<div class="stamp">', '</div>') + stmp = line.split() + if not suspend or not resume or len(stmp) != 8: + return False + try: + dt = datetime.strptime(' '.join(stmp[3:]), '%B %d %Y, %I:%M:%S %p') + except: + return False + sysvals.hostname = stmp[0] + tstr = dt.strftime('%Y/%m/%d %H:%M:%S') + error = find_in_html(html, '<table class="testfail"><tr><td>', '</td>') + if error: + m = re.match('[a-z0-9]* failed in (?P<p>\S*).*', error) + if m: + result = 'fail in %s' % m.group('p') + else: + result = 'fail' + else: + result = 'pass' + # extract error info + tp, ilist = False, [] + extra = dict() + log = find_in_html(html, '<div id="dmesglog" style="display:none;">', + '</div>').strip() + if log: + d = Data(0) + d.end = 999999999 + d.dmesgtext = log.split('\n') + tp = d.extractErrorInfo() + for msg in tp.msglist: + sysvals.errorSummary(issues, msg) + if stmp[2] == 'freeze': + extra = d.turbostatInfo() + elist = dict() + for dir in d.errorinfo: + for err in d.errorinfo[dir]: + if err[0] not in elist: + elist[err[0]] = 0 + elist[err[0]] += 1 + for i in elist: + ilist.append('%sx%d' % (i, elist[i]) if elist[i] > 1 else i) + wifi = find_in_html(html, 'Wifi Resume: ', '</td>') + if wifi: + extra['wifi'] = wifi + low = find_in_html(html, 'freeze time: <b>', ' ms</b>') + if low and 'waking' in low: + issue = 'FREEZEWAKE' + match = [i for i in issues if i['match'] == issue] + if len(match) > 0: + match[0]['count'] += 1 + if sysvals.hostname not in match[0]['urls']: + match[0]['urls'][sysvals.hostname] = [sysvals.htmlfile] + elif sysvals.htmlfile not in match[0]['urls'][sysvals.hostname]: + match[0]['urls'][sysvals.hostname].append(sysvals.htmlfile) + else: + issues.append({ + 'match': issue, 'count': 1, 'line': issue, + 'urls': {sysvals.hostname: [sysvals.htmlfile]}, + }) + ilist.append(issue) + # extract device info + devices = dict() + for line in html.split('\n'): + m = re.match(' *<div id=\"[a,0-9]*\" *title=\"(?P<title>.*)\" class=\"thread.*', line) + if not m or 'thread kth' in line or 'thread sec' in line: + continue + m = re.match('(?P<n>.*) \((?P<t>[0-9,\.]*) ms\) (?P<p>.*)', m.group('title')) + if not m: + continue + name, time, phase = m.group('n'), m.group('t'), m.group('p') + if ' async' in name or ' sync' in name: + name = ' '.join(name.split(' ')[:-1]) + if phase.startswith('suspend'): + d = 'suspend' + elif phase.startswith('resume'): + d = 'resume' + else: + continue + if d not in devices: + devices[d] = dict() + if name not in devices[d]: + devices[d][name] = 0.0 + devices[d][name] += float(time) + # create worst device info + worst = dict() + for d in ['suspend', 'resume']: + worst[d] = {'name':'', 'time': 0.0} + dev = devices[d] if d in devices else 0 + if dev and len(dev.keys()) > 0: + n = sorted(dev, key=lambda k:(dev[k], k), reverse=True)[0] + worst[d]['name'], worst[d]['time'] = n, dev[n] + data = { + 'mode': stmp[2], + 'host': stmp[0], + 'kernel': stmp[1], + 'sysinfo': sysinfo, + 'time': tstr, + 'result': result, + 'issues': ' '.join(ilist), + 'suspend': suspend, + 'resume': resume, + 'devlist': devices, + 'sus_worst': worst['suspend']['name'], + 'sus_worsttime': worst['suspend']['time'], + 'res_worst': worst['resume']['name'], + 'res_worsttime': worst['resume']['time'], + 'url': sysvals.htmlfile, + } + for key in extra: + data[key] = extra[key] + if fulldetail: + data['funclist'] = find_in_html(html, '<div title="', '" class="traceevent"', False) + if tp: + for arg in ['-multi ', '-info ']: + if arg in tp.cmdline: + data['target'] = tp.cmdline[tp.cmdline.find(arg):].split()[1] + break + return data + +def genHtml(subdir, force=False): + for dirname, dirnames, filenames in os.walk(subdir): + sysvals.dmesgfile = sysvals.ftracefile = sysvals.htmlfile = '' + for filename in filenames: + file = os.path.join(dirname, filename) + if sysvals.usable(file): + if(re.match('.*_dmesg.txt', filename)): + sysvals.dmesgfile = file + elif(re.match('.*_ftrace.txt', filename)): + sysvals.ftracefile = file + sysvals.setOutputFile() + if (sysvals.dmesgfile or sysvals.ftracefile) and sysvals.htmlfile and \ + (force or not sysvals.usable(sysvals.htmlfile)): + pprint('FTRACE: %s' % sysvals.ftracefile) + if sysvals.dmesgfile: + pprint('DMESG : %s' % sysvals.dmesgfile) + rerunTest() + +# Function: runSummary +# Description: +# create a summary of tests in a sub-directory +def runSummary(subdir, local=True, genhtml=False): + inpath = os.path.abspath(subdir) + outpath = os.path.abspath('.') if local else inpath + pprint('Generating a summary of folder:\n %s' % inpath) + if genhtml: + genHtml(subdir) + target, issues, testruns = '', [], [] + desc = {'host':[],'mode':[],'kernel':[]} + for dirname, dirnames, filenames in os.walk(subdir): + for filename in filenames: + if(not re.match('.*.html', filename)): + continue + data = data_from_html(os.path.join(dirname, filename), outpath, issues) + if(not data): + continue + if 'target' in data: + target = data['target'] + testruns.append(data) + for key in desc: + if data[key] not in desc[key]: + desc[key].append(data[key]) + pprint('Summary files:') + if len(desc['host']) == len(desc['mode']) == len(desc['kernel']) == 1: + title = '%s %s %s' % (desc['host'][0], desc['kernel'][0], desc['mode'][0]) + if target: + title += ' %s' % target + else: + title = inpath + createHTMLSummarySimple(testruns, os.path.join(outpath, 'summary.html'), title) + pprint(' summary.html - tabular list of test data found') + createHTMLDeviceSummary(testruns, os.path.join(outpath, 'summary-devices.html'), title) + pprint(' summary-devices.html - kernel device list sorted by total execution time') + createHTMLIssuesSummary(testruns, issues, os.path.join(outpath, 'summary-issues.html'), title) + pprint(' summary-issues.html - kernel issues found sorted by frequency') + +# Function: checkArgBool +# Description: +# check if a boolean string value is true or false +def checkArgBool(name, value): + if value in switchvalues: + if value in switchoff: + return False + return True + doError('invalid boolean --> (%s: %s), use "true/false" or "1/0"' % (name, value), True) + return False + +# Function: configFromFile +# Description: +# Configure the script via the info in a config file +def configFromFile(file): + Config = configparser.ConfigParser() + + Config.read(file) + sections = Config.sections() + overridekprobes = False + overridedevkprobes = False + if 'Settings' in sections: + for opt in Config.options('Settings'): + value = Config.get('Settings', opt).lower() + option = opt.lower() + if(option == 'verbose'): + sysvals.verbose = checkArgBool(option, value) + elif(option == 'addlogs'): + sysvals.dmesglog = sysvals.ftracelog = checkArgBool(option, value) + elif(option == 'dev'): + sysvals.usedevsrc = checkArgBool(option, value) + elif(option == 'proc'): + sysvals.useprocmon = checkArgBool(option, value) + elif(option == 'x2'): + if checkArgBool(option, value): + sysvals.execcount = 2 + elif(option == 'callgraph'): + sysvals.usecallgraph = checkArgBool(option, value) + elif(option == 'override-timeline-functions'): + overridekprobes = checkArgBool(option, value) + elif(option == 'override-dev-timeline-functions'): + overridedevkprobes = checkArgBool(option, value) + elif(option == 'skiphtml'): + sysvals.skiphtml = checkArgBool(option, value) + elif(option == 'sync'): + sysvals.sync = checkArgBool(option, value) + elif(option == 'rs' or option == 'runtimesuspend'): + if value in switchvalues: + if value in switchoff: + sysvals.rs = -1 + else: + sysvals.rs = 1 + else: + doError('invalid value --> (%s: %s), use "enable/disable"' % (option, value), True) + elif(option == 'display'): + disopt = ['on', 'off', 'standby', 'suspend'] + if value not in disopt: + doError('invalid value --> (%s: %s), use %s' % (option, value, disopt), True) + sysvals.display = value + elif(option == 'gzip'): + sysvals.gzip = checkArgBool(option, value) + elif(option == 'cgfilter'): + sysvals.setCallgraphFilter(value) + elif(option == 'cgskip'): + if value in switchoff: + sysvals.cgskip = '' + else: + sysvals.cgskip = sysvals.configFile(val) + if(not sysvals.cgskip): + doError('%s does not exist' % sysvals.cgskip) + elif(option == 'cgtest'): + sysvals.cgtest = getArgInt('cgtest', value, 0, 1, False) + elif(option == 'cgphase'): + d = Data(0) + if value not in d.phasedef: + doError('invalid phase --> (%s: %s), valid phases are %s'\ + % (option, value, d.phasedef.keys()), True) + sysvals.cgphase = value + elif(option == 'fadd'): + file = sysvals.configFile(value) + if(not file): + doError('%s does not exist' % value) + sysvals.addFtraceFilterFunctions(file) + elif(option == 'result'): + sysvals.result = value + elif(option == 'multi'): + nums = value.split() + if len(nums) != 2: + doError('multi requires 2 integers (exec_count and delay)', True) + sysvals.multiinit(nums[0], nums[1]) + elif(option == 'devicefilter'): + sysvals.setDeviceFilter(value) + elif(option == 'expandcg'): + sysvals.cgexp = checkArgBool(option, value) + elif(option == 'srgap'): + if checkArgBool(option, value): + sysvals.srgap = 5 + elif(option == 'mode'): + sysvals.suspendmode = value + elif(option == 'command' or option == 'cmd'): + sysvals.testcommand = value + elif(option == 'x2delay'): + sysvals.x2delay = getArgInt('x2delay', value, 0, 60000, False) + elif(option == 'predelay'): + sysvals.predelay = getArgInt('predelay', value, 0, 60000, False) + elif(option == 'postdelay'): + sysvals.postdelay = getArgInt('postdelay', value, 0, 60000, False) + elif(option == 'maxdepth'): + sysvals.max_graph_depth = getArgInt('maxdepth', value, 0, 1000, False) + elif(option == 'rtcwake'): + if value in switchoff: + sysvals.rtcwake = False + else: + sysvals.rtcwake = True + sysvals.rtcwaketime = getArgInt('rtcwake', value, 0, 3600, False) + elif(option == 'timeprec'): + sysvals.setPrecision(getArgInt('timeprec', value, 0, 6, False)) + elif(option == 'mindev'): + sysvals.mindevlen = getArgFloat('mindev', value, 0.0, 10000.0, False) + elif(option == 'callloop-maxgap'): + sysvals.callloopmaxgap = getArgFloat('callloop-maxgap', value, 0.0, 1.0, False) + elif(option == 'callloop-maxlen'): + sysvals.callloopmaxgap = getArgFloat('callloop-maxlen', value, 0.0, 1.0, False) + elif(option == 'mincg'): + sysvals.mincglen = getArgFloat('mincg', value, 0.0, 10000.0, False) + elif(option == 'bufsize'): + sysvals.bufsize = getArgInt('bufsize', value, 1, 1024*1024*8, False) + elif(option == 'output-dir'): + sysvals.outdir = sysvals.setOutputFolder(value) + + if sysvals.suspendmode == 'command' and not sysvals.testcommand: + doError('No command supplied for mode "command"') + + # compatibility errors + if sysvals.usedevsrc and sysvals.usecallgraph: + doError('-dev is not compatible with -f') + if sysvals.usecallgraph and sysvals.useprocmon: + doError('-proc is not compatible with -f') + + if overridekprobes: + sysvals.tracefuncs = dict() + if overridedevkprobes: + sysvals.dev_tracefuncs = dict() + + kprobes = dict() + kprobesec = 'dev_timeline_functions_'+platform.machine() + if kprobesec in sections: + for name in Config.options(kprobesec): + text = Config.get(kprobesec, name) + kprobes[name] = (text, True) + kprobesec = 'timeline_functions_'+platform.machine() + if kprobesec in sections: + for name in Config.options(kprobesec): + if name in kprobes: + doError('Duplicate timeline function found "%s"' % (name)) + text = Config.get(kprobesec, name) + kprobes[name] = (text, False) + + for name in kprobes: + function = name + format = name + color = '' + args = dict() + text, dev = kprobes[name] + data = text.split() + i = 0 + for val in data: + # bracketted strings are special formatting, read them separately + if val[0] == '[' and val[-1] == ']': + for prop in val[1:-1].split(','): + p = prop.split('=') + if p[0] == 'color': + try: + color = int(p[1], 16) + color = '#'+p[1] + except: + color = p[1] + continue + # first real arg should be the format string + if i == 0: + format = val + # all other args are actual function args + else: + d = val.split('=') + args[d[0]] = d[1] + i += 1 + if not function or not format: + doError('Invalid kprobe: %s' % name) + for arg in re.findall('{(?P<n>[a-z,A-Z,0-9]*)}', format): + if arg not in args: + doError('Kprobe "%s" is missing argument "%s"' % (name, arg)) + if (dev and name in sysvals.dev_tracefuncs) or (not dev and name in sysvals.tracefuncs): + doError('Duplicate timeline function found "%s"' % (name)) + + kp = { + 'name': name, + 'func': function, + 'format': format, + sysvals.archargs: args + } + if color: + kp['color'] = color + if dev: + sysvals.dev_tracefuncs[name] = kp + else: + sysvals.tracefuncs[name] = kp + +# Function: printHelp +# Description: +# print out the help text +def printHelp(): + pprint('\n%s v%s\n'\ + 'Usage: sudo sleepgraph <options> <commands>\n'\ + '\n'\ + 'Description:\n'\ + ' This tool is designed to assist kernel and OS developers in optimizing\n'\ + ' their linux stack\'s suspend/resume time. Using a kernel image built\n'\ + ' with a few extra options enabled, the tool will execute a suspend and\n'\ + ' capture dmesg and ftrace data until resume is complete. This data is\n'\ + ' transformed into a device timeline and an optional callgraph to give\n'\ + ' a detailed view of which devices/subsystems are taking the most\n'\ + ' time in suspend/resume.\n'\ + '\n'\ + ' If no specific command is given, the default behavior is to initiate\n'\ + ' a suspend/resume and capture the dmesg/ftrace output as an html timeline.\n'\ + '\n'\ + ' Generates output files in subdirectory: suspend-yymmdd-HHMMSS\n'\ + ' HTML output: <hostname>_<mode>.html\n'\ + ' raw dmesg output: <hostname>_<mode>_dmesg.txt\n'\ + ' raw ftrace output: <hostname>_<mode>_ftrace.txt\n'\ + '\n'\ + 'Options:\n'\ + ' -h Print this help text\n'\ + ' -v Print the current tool version\n'\ + ' -config fn Pull arguments and config options from file fn\n'\ + ' -verbose Print extra information during execution and analysis\n'\ + ' -m mode Mode to initiate for suspend (default: %s)\n'\ + ' -o name Overrides the output subdirectory name when running a new test\n'\ + ' default: suspend-{date}-{time}\n'\ + ' -rtcwake t Wakeup t seconds after suspend, set t to "off" to disable (default: 15)\n'\ + ' -addlogs Add the dmesg and ftrace logs to the html output\n'\ + ' -noturbostat Dont use turbostat in freeze mode (default: disabled)\n'\ + ' -srgap Add a visible gap in the timeline between sus/res (default: disabled)\n'\ + ' -skiphtml Run the test and capture the trace logs, but skip the timeline (default: disabled)\n'\ + ' -result fn Export a results table to a text file for parsing.\n'\ + ' -wifi If a wifi connection is available, check that it reconnects after resume.\n'\ + ' [testprep]\n'\ + ' -sync Sync the filesystems before starting the test\n'\ + ' -rs on/off Enable/disable runtime suspend for all devices, restore all after test\n'\ + ' -display m Change the display mode to m for the test (on/off/standby/suspend)\n'\ + ' [advanced]\n'\ + ' -gzip Gzip the trace and dmesg logs to save space\n'\ + ' -cmd {s} Run the timeline over a custom command, e.g. "sync -d"\n'\ + ' -proc Add usermode process info into the timeline (default: disabled)\n'\ + ' -dev Add kernel function calls and threads to the timeline (default: disabled)\n'\ + ' -x2 Run two suspend/resumes back to back (default: disabled)\n'\ + ' -x2delay t Include t ms delay between multiple test runs (default: 0 ms)\n'\ + ' -predelay t Include t ms delay before 1st suspend (default: 0 ms)\n'\ + ' -postdelay t Include t ms delay after last resume (default: 0 ms)\n'\ + ' -mindev ms Discard all device blocks shorter than ms milliseconds (e.g. 0.001 for us)\n'\ + ' -multi n d Execute <n> consecutive tests at <d> seconds intervals. If <n> is followed\n'\ + ' by a "d", "h", or "m" execute for <n> days, hours, or mins instead.\n'\ + ' The outputs will be created in a new subdirectory with a summary page.\n'\ + ' -maxfail n Abort a -multi run after n consecutive fails (default is 0 = never abort)\n'\ + ' [debug]\n'\ + ' -f Use ftrace to create device callgraphs (default: disabled)\n'\ + ' -ftop Use ftrace on the top level call: "%s" (default: disabled)\n'\ + ' -maxdepth N limit the callgraph data to N call levels (default: 0=all)\n'\ + ' -expandcg pre-expand the callgraph data in the html output (default: disabled)\n'\ + ' -fadd file Add functions to be graphed in the timeline from a list in a text file\n'\ + ' -filter "d1,d2,..." Filter out all but this comma-delimited list of device names\n'\ + ' -mincg ms Discard all callgraphs shorter than ms milliseconds (e.g. 0.001 for us)\n'\ + ' -cgphase P Only show callgraph data for phase P (e.g. suspend_late)\n'\ + ' -cgtest N Only show callgraph data for test N (e.g. 0 or 1 in an x2 run)\n'\ + ' -timeprec N Number of significant digits in timestamps (0:S, [3:ms], 6:us)\n'\ + ' -cgfilter S Filter the callgraph output in the timeline\n'\ + ' -cgskip file Callgraph functions to skip, off to disable (default: cgskip.txt)\n'\ + ' -bufsize N Set trace buffer size to N kilo-bytes (default: all of free memory)\n'\ + ' -devdump Print out all the raw device data for each phase\n'\ + ' -cgdump Print out all the raw callgraph data\n'\ + '\n'\ + 'Other commands:\n'\ + ' -modes List available suspend modes\n'\ + ' -status Test to see if the system is enabled to run this tool\n'\ + ' -fpdt Print out the contents of the ACPI Firmware Performance Data Table\n'\ + ' -wificheck Print out wifi connection info\n'\ + ' -x<mode> Test xset by toggling the given mode (on/off/standby/suspend)\n'\ + ' -sysinfo Print out system info extracted from BIOS\n'\ + ' -devinfo Print out the pm settings of all devices which support runtime suspend\n'\ + ' -cmdinfo Print out all the platform info collected before and after suspend/resume\n'\ + ' -flist Print the list of functions currently being captured in ftrace\n'\ + ' -flistall Print all functions capable of being captured in ftrace\n'\ + ' -summary dir Create a summary of tests in this dir [-genhtml builds missing html]\n'\ + ' [redo]\n'\ + ' -ftrace ftracefile Create HTML output using ftrace input (used with -dmesg)\n'\ + ' -dmesg dmesgfile Create HTML output using dmesg (used with -ftrace)\n'\ + '' % (sysvals.title, sysvals.version, sysvals.suspendmode, sysvals.ftopfunc)) + return True + +# ----------------- MAIN -------------------- +# exec start (skipped if script is loaded as library) +if __name__ == '__main__': + genhtml = False + cmd = '' + simplecmds = ['-sysinfo', '-modes', '-fpdt', '-flist', '-flistall', + '-devinfo', '-status', '-xon', '-xoff', '-xstandby', '-xsuspend', + '-xinit', '-xreset', '-xstat', '-wificheck', '-cmdinfo'] + if '-f' in sys.argv: + sysvals.cgskip = sysvals.configFile('cgskip.txt') + # loop through the command line arguments + args = iter(sys.argv[1:]) + for arg in args: + if(arg == '-m'): + try: + val = next(args) + except: + doError('No mode supplied', True) + if val == 'command' and not sysvals.testcommand: + doError('No command supplied for mode "command"', True) + sysvals.suspendmode = val + elif(arg in simplecmds): + cmd = arg[1:] + elif(arg == '-h'): + printHelp() + sys.exit(0) + elif(arg == '-v'): + pprint("Version %s" % sysvals.version) + sys.exit(0) + elif(arg == '-x2'): + sysvals.execcount = 2 + elif(arg == '-x2delay'): + sysvals.x2delay = getArgInt('-x2delay', args, 0, 60000) + elif(arg == '-predelay'): + sysvals.predelay = getArgInt('-predelay', args, 0, 60000) + elif(arg == '-postdelay'): + sysvals.postdelay = getArgInt('-postdelay', args, 0, 60000) + elif(arg == '-f'): + sysvals.usecallgraph = True + elif(arg == '-ftop'): + sysvals.usecallgraph = True + sysvals.ftop = True + sysvals.usekprobes = False + elif(arg == '-skiphtml'): + sysvals.skiphtml = True + elif(arg == '-cgdump'): + sysvals.cgdump = True + elif(arg == '-devdump'): + sysvals.devdump = True + elif(arg == '-genhtml'): + genhtml = True + elif(arg == '-addlogs'): + sysvals.dmesglog = sysvals.ftracelog = True + elif(arg == '-nologs'): + sysvals.dmesglog = sysvals.ftracelog = False + elif(arg == '-addlogdmesg'): + sysvals.dmesglog = True + elif(arg == '-addlogftrace'): + sysvals.ftracelog = True + elif(arg == '-noturbostat'): + sysvals.tstat = False + elif(arg == '-verbose'): + sysvals.verbose = True + elif(arg == '-proc'): + sysvals.useprocmon = True + elif(arg == '-dev'): + sysvals.usedevsrc = True + elif(arg == '-sync'): + sysvals.sync = True + elif(arg == '-wifi'): + sysvals.wifi = True + elif(arg == '-gzip'): + sysvals.gzip = True + elif(arg == '-info'): + try: + val = next(args) + except: + doError('-info requires one string argument', True) + elif(arg == '-rs'): + try: + val = next(args) + except: + doError('-rs requires "enable" or "disable"', True) + if val.lower() in switchvalues: + if val.lower() in switchoff: + sysvals.rs = -1 + else: + sysvals.rs = 1 + else: + doError('invalid option: %s, use "enable/disable" or "on/off"' % val, True) + elif(arg == '-display'): + try: + val = next(args) + except: + doError('-display requires an mode value', True) + disopt = ['on', 'off', 'standby', 'suspend'] + if val.lower() not in disopt: + doError('valid display mode values are %s' % disopt, True) + sysvals.display = val.lower() + elif(arg == '-maxdepth'): + sysvals.max_graph_depth = getArgInt('-maxdepth', args, 0, 1000) + elif(arg == '-rtcwake'): + try: + val = next(args) + except: + doError('No rtcwake time supplied', True) + if val.lower() in switchoff: + sysvals.rtcwake = False + else: + sysvals.rtcwake = True + sysvals.rtcwaketime = getArgInt('-rtcwake', val, 0, 3600, False) + elif(arg == '-timeprec'): + sysvals.setPrecision(getArgInt('-timeprec', args, 0, 6)) + elif(arg == '-mindev'): + sysvals.mindevlen = getArgFloat('-mindev', args, 0.0, 10000.0) + elif(arg == '-mincg'): + sysvals.mincglen = getArgFloat('-mincg', args, 0.0, 10000.0) + elif(arg == '-bufsize'): + sysvals.bufsize = getArgInt('-bufsize', args, 1, 1024*1024*8) + elif(arg == '-cgtest'): + sysvals.cgtest = getArgInt('-cgtest', args, 0, 1) + elif(arg == '-cgphase'): + try: + val = next(args) + except: + doError('No phase name supplied', True) + d = Data(0) + if val not in d.phasedef: + doError('invalid phase --> (%s: %s), valid phases are %s'\ + % (arg, val, d.phasedef.keys()), True) + sysvals.cgphase = val + elif(arg == '-cgfilter'): + try: + val = next(args) + except: + doError('No callgraph functions supplied', True) + sysvals.setCallgraphFilter(val) + elif(arg == '-skipkprobe'): + try: + val = next(args) + except: + doError('No kprobe functions supplied', True) + sysvals.skipKprobes(val) + elif(arg == '-cgskip'): + try: + val = next(args) + except: + doError('No file supplied', True) + if val.lower() in switchoff: + sysvals.cgskip = '' + else: + sysvals.cgskip = sysvals.configFile(val) + if(not sysvals.cgskip): + doError('%s does not exist' % sysvals.cgskip) + elif(arg == '-callloop-maxgap'): + sysvals.callloopmaxgap = getArgFloat('-callloop-maxgap', args, 0.0, 1.0) + elif(arg == '-callloop-maxlen'): + sysvals.callloopmaxlen = getArgFloat('-callloop-maxlen', args, 0.0, 1.0) + elif(arg == '-cmd'): + try: + val = next(args) + except: + doError('No command string supplied', True) + sysvals.testcommand = val + sysvals.suspendmode = 'command' + elif(arg == '-expandcg'): + sysvals.cgexp = True + elif(arg == '-srgap'): + sysvals.srgap = 5 + elif(arg == '-maxfail'): + sysvals.maxfail = getArgInt('-maxfail', args, 0, 1000000) + elif(arg == '-multi'): + try: + c, d = next(args), next(args) + except: + doError('-multi requires two values', True) + sysvals.multiinit(c, d) + elif(arg == '-o'): + try: + val = next(args) + except: + doError('No subdirectory name supplied', True) + sysvals.outdir = sysvals.setOutputFolder(val) + elif(arg == '-config'): + try: + val = next(args) + except: + doError('No text file supplied', True) + file = sysvals.configFile(val) + if(not file): + doError('%s does not exist' % val) + configFromFile(file) + elif(arg == '-fadd'): + try: + val = next(args) + except: + doError('No text file supplied', True) + file = sysvals.configFile(val) + if(not file): + doError('%s does not exist' % val) + sysvals.addFtraceFilterFunctions(file) + elif(arg == '-dmesg'): + try: + val = next(args) + except: + doError('No dmesg file supplied', True) + sysvals.notestrun = True + sysvals.dmesgfile = val + if(os.path.exists(sysvals.dmesgfile) == False): + doError('%s does not exist' % sysvals.dmesgfile) + elif(arg == '-ftrace'): + try: + val = next(args) + except: + doError('No ftrace file supplied', True) + sysvals.notestrun = True + sysvals.ftracefile = val + if(os.path.exists(sysvals.ftracefile) == False): + doError('%s does not exist' % sysvals.ftracefile) + elif(arg == '-summary'): + try: + val = next(args) + except: + doError('No directory supplied', True) + cmd = 'summary' + sysvals.outdir = val + sysvals.notestrun = True + if(os.path.isdir(val) == False): + doError('%s is not accesible' % val) + elif(arg == '-filter'): + try: + val = next(args) + except: + doError('No devnames supplied', True) + sysvals.setDeviceFilter(val) + elif(arg == '-result'): + try: + val = next(args) + except: + doError('No result file supplied', True) + sysvals.result = val + sysvals.signalHandlerInit() + else: + doError('Invalid argument: '+arg, True) + + # compatibility errors + if(sysvals.usecallgraph and sysvals.usedevsrc): + doError('-dev is not compatible with -f') + if(sysvals.usecallgraph and sysvals.useprocmon): + doError('-proc is not compatible with -f') + + if sysvals.usecallgraph and sysvals.cgskip: + sysvals.vprint('Using cgskip file: %s' % sysvals.cgskip) + sysvals.setCallgraphBlacklist(sysvals.cgskip) + + # callgraph size cannot exceed device size + if sysvals.mincglen < sysvals.mindevlen: + sysvals.mincglen = sysvals.mindevlen + + # remove existing buffers before calculating memory + if(sysvals.usecallgraph or sysvals.usedevsrc): + sysvals.fsetVal('16', 'buffer_size_kb') + sysvals.cpuInfo() + + # just run a utility command and exit + if(cmd != ''): + ret = 0 + if(cmd == 'status'): + if not statusCheck(True): + ret = 1 + elif(cmd == 'fpdt'): + if not getFPDT(True): + ret = 1 + elif(cmd == 'sysinfo'): + sysvals.printSystemInfo(True) + elif(cmd == 'devinfo'): + deviceInfo() + elif(cmd == 'modes'): + pprint(getModes()) + elif(cmd == 'flist'): + sysvals.getFtraceFilterFunctions(True) + elif(cmd == 'flistall'): + sysvals.getFtraceFilterFunctions(False) + elif(cmd == 'summary'): + runSummary(sysvals.outdir, True, genhtml) + elif(cmd in ['xon', 'xoff', 'xstandby', 'xsuspend', 'xinit', 'xreset']): + sysvals.verbose = True + ret = displayControl(cmd[1:]) + elif(cmd == 'xstat'): + pprint('Display Status: %s' % displayControl('stat').upper()) + elif(cmd == 'wificheck'): + dev = sysvals.checkWifi() + if dev: + print('%s is connected' % sysvals.wifiDetails(dev)) + else: + print('No wifi connection found') + elif(cmd == 'cmdinfo'): + for out in sysvals.cmdinfo(False, True): + print('[%s - %s]\n%s\n' % out) + sys.exit(ret) + + # if instructed, re-analyze existing data files + if(sysvals.notestrun): + stamp = rerunTest(sysvals.outdir) + sysvals.outputResult(stamp) + sys.exit(0) + + # verify that we can run a test + error = statusCheck() + if(error): + doError(error) + + # extract mem/disk extra modes and convert + mode = sysvals.suspendmode + if mode.startswith('mem'): + memmode = mode.split('-', 1)[-1] if '-' in mode else 'deep' + if memmode == 'shallow': + mode = 'standby' + elif memmode == 's2idle': + mode = 'freeze' + else: + mode = 'mem' + sysvals.memmode = memmode + sysvals.suspendmode = mode + if mode.startswith('disk-'): + sysvals.diskmode = mode.split('-', 1)[-1] + sysvals.suspendmode = 'disk' + + sysvals.systemInfo(dmidecode(sysvals.mempath)) + + setRuntimeSuspend(True) + if sysvals.display: + displayControl('init') + failcnt, ret = 0, 0 + if sysvals.multitest['run']: + # run multiple tests in a separate subdirectory + if not sysvals.outdir: + if 'time' in sysvals.multitest: + s = '-%dm' % sysvals.multitest['time'] + else: + s = '-x%d' % sysvals.multitest['count'] + sysvals.outdir = datetime.now().strftime('suspend-%y%m%d-%H%M%S'+s) + if not os.path.isdir(sysvals.outdir): + os.makedirs(sysvals.outdir) + sysvals.sudoUserchown(sysvals.outdir) + finish = datetime.now() + if 'time' in sysvals.multitest: + finish += timedelta(minutes=sysvals.multitest['time']) + for i in range(sysvals.multitest['count']): + sysvals.multistat(True, i, finish) + if i != 0 and sysvals.multitest['delay'] > 0: + pprint('Waiting %d seconds...' % (sysvals.multitest['delay'])) + time.sleep(sysvals.multitest['delay']) + fmt = 'suspend-%y%m%d-%H%M%S' + sysvals.testdir = os.path.join(sysvals.outdir, datetime.now().strftime(fmt)) + ret = runTest(i+1, True) + failcnt = 0 if not ret else failcnt + 1 + if sysvals.maxfail > 0 and failcnt >= sysvals.maxfail: + pprint('Maximum fail count of %d reached, aborting multitest' % (sysvals.maxfail)) + break + time.sleep(5) + sysvals.resetlog() + sysvals.multistat(False, i, finish) + if 'time' in sysvals.multitest and datetime.now() >= finish: + break + if not sysvals.skiphtml: + runSummary(sysvals.outdir, False, False) + sysvals.sudoUserchown(sysvals.outdir) + else: + if sysvals.outdir: + sysvals.testdir = sysvals.outdir + # run the test in the current directory + ret = runTest() + if sysvals.display: + displayControl('reset') + setRuntimeSuspend(False) + sys.exit(ret) diff --git a/tools/power/x86/intel-speed-select/.gitignore b/tools/power/x86/intel-speed-select/.gitignore new file mode 100644 index 000000000..a814f89fe --- /dev/null +++ b/tools/power/x86/intel-speed-select/.gitignore @@ -0,0 +1,3 @@ +# SPDX-License-Identifier: GPL-2.0-only +include/ +intel-speed-select diff --git a/tools/power/x86/intel-speed-select/Build b/tools/power/x86/intel-speed-select/Build new file mode 100644 index 000000000..b61456d75 --- /dev/null +++ b/tools/power/x86/intel-speed-select/Build @@ -0,0 +1 @@ +intel-speed-select-y += isst-config.o isst-core.o isst-display.o diff --git a/tools/power/x86/intel-speed-select/Makefile b/tools/power/x86/intel-speed-select/Makefile new file mode 100644 index 000000000..12c6939dc --- /dev/null +++ b/tools/power/x86/intel-speed-select/Makefile @@ -0,0 +1,56 @@ +# SPDX-License-Identifier: GPL-2.0 +include ../../../scripts/Makefile.include + +bindir ?= /usr/bin + +ifeq ($(srctree),) +srctree := $(patsubst %/,%,$(dir $(CURDIR))) +srctree := $(patsubst %/,%,$(dir $(srctree))) +srctree := $(patsubst %/,%,$(dir $(srctree))) +srctree := $(patsubst %/,%,$(dir $(srctree))) +endif + +# Do not use make's built-in rules +# (this improves performance and avoids hard-to-debug behaviour); +MAKEFLAGS += -r + +override CFLAGS += -O2 -Wall -g -D_GNU_SOURCE -I$(OUTPUT)include + +ALL_TARGETS := intel-speed-select +ALL_PROGRAMS := $(patsubst %,$(OUTPUT)%,$(ALL_TARGETS)) + +all: $(ALL_PROGRAMS) + +export srctree OUTPUT CC LD CFLAGS +include $(srctree)/tools/build/Makefile.include + +# +# We need the following to be outside of kernel tree +# +$(OUTPUT)include/linux/isst_if.h: ../../../../include/uapi/linux/isst_if.h + mkdir -p $(OUTPUT)include/linux 2>&1 || true + ln -sf $(CURDIR)/../../../../include/uapi/linux/isst_if.h $@ + +prepare: $(OUTPUT)include/linux/isst_if.h + +ISST_IN := $(OUTPUT)intel-speed-select-in.o + +$(ISST_IN): prepare FORCE + $(Q)$(MAKE) $(build)=intel-speed-select +$(OUTPUT)intel-speed-select: $(ISST_IN) + $(QUIET_LINK)$(CC) $(CFLAGS) $(LDFLAGS) $< -o $@ + +clean: + rm -f $(ALL_PROGRAMS) + rm -rf $(OUTPUT)include/linux/isst_if.h + find $(if $(OUTPUT),$(OUTPUT),.) -name '*.o' -delete -o -name '\.*.d' -delete + +install: $(ALL_PROGRAMS) + install -d -m 755 $(DESTDIR)$(bindir); \ + for program in $(ALL_PROGRAMS); do \ + install $$program $(DESTDIR)$(bindir); \ + done + +FORCE: + +.PHONY: all install clean FORCE prepare diff --git a/tools/power/x86/intel-speed-select/isst-config.c b/tools/power/x86/intel-speed-select/isst-config.c new file mode 100644 index 000000000..ead9e51f7 --- /dev/null +++ b/tools/power/x86/intel-speed-select/isst-config.c @@ -0,0 +1,2802 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Intel Speed Select -- Enumerate and control features + * Copyright (c) 2019 Intel Corporation. + */ + +#include <linux/isst_if.h> + +#include "isst.h" + +struct process_cmd_struct { + char *feature; + char *command; + void (*process_fn)(int arg); + int arg; +}; + +static const char *version_str = "v1.6"; +static const int supported_api_ver = 1; +static struct isst_if_platform_info isst_platform_info; +static char *progname; +static int debug_flag; +static FILE *outf; + +static int cpu_model; +static int cpu_stepping; + +#define MAX_CPUS_IN_ONE_REQ 256 +static short max_target_cpus; +static unsigned short target_cpus[MAX_CPUS_IN_ONE_REQ]; + +static int topo_max_cpus; +static size_t present_cpumask_size; +static cpu_set_t *present_cpumask; +static size_t target_cpumask_size; +static cpu_set_t *target_cpumask; +static int tdp_level = 0xFF; +static int fact_bucket = 0xFF; +static int fact_avx = 0xFF; +static unsigned long long fact_trl; +static int out_format_json; +static int cmd_help; +static int force_online_offline; +static int auto_mode; +static int fact_enable_fail; + +static int mbox_delay; +static int mbox_retries = 3; + +/* clos related */ +static int current_clos = -1; +static int clos_epp = -1; +static int clos_prop_prio = -1; +static int clos_min = -1; +static int clos_max = -1; +static int clos_desired = -1; +static int clos_priority_type; + +struct _cpu_map { + unsigned short core_id; + unsigned short pkg_id; + unsigned short die_id; + unsigned short punit_cpu; + unsigned short punit_cpu_core; +}; +struct _cpu_map *cpu_map; + +struct cpu_topology { + short cpu; + short core_id; + short pkg_id; + short die_id; +}; + +FILE *get_output_file(void) +{ + return outf; +} + +void debug_printf(const char *format, ...) +{ + va_list args; + + va_start(args, format); + + if (debug_flag) + vprintf(format, args); + + va_end(args); +} + + +int is_clx_n_platform(void) +{ + if (cpu_model == 0x55) + if (cpu_stepping == 0x6 || cpu_stepping == 0x7) + return 1; + return 0; +} + +int is_skx_based_platform(void) +{ + if (cpu_model == 0x55) + return 1; + + return 0; +} + +static int update_cpu_model(void) +{ + unsigned int ebx, ecx, edx; + unsigned int fms, family; + + __cpuid(1, fms, ebx, ecx, edx); + family = (fms >> 8) & 0xf; + cpu_model = (fms >> 4) & 0xf; + if (family == 6 || family == 0xf) + cpu_model += ((fms >> 16) & 0xf) << 4; + + cpu_stepping = fms & 0xf; + /* only three CascadeLake-N models are supported */ + if (is_clx_n_platform()) { + FILE *fp; + size_t n = 0; + char *line = NULL; + int ret = 1; + + fp = fopen("/proc/cpuinfo", "r"); + if (!fp) + err(-1, "cannot open /proc/cpuinfo\n"); + + while (getline(&line, &n, fp) > 0) { + if (strstr(line, "model name")) { + if (strstr(line, "6252N") || + strstr(line, "6230N") || + strstr(line, "5218N")) + ret = 0; + break; + } + } + free(line); + fclose(fp); + return ret; + } + return 0; +} + +/* Open a file, and exit on failure */ +static FILE *fopen_or_exit(const char *path, const char *mode) +{ + FILE *filep = fopen(path, mode); + + if (!filep) + err(1, "%s: open failed", path); + + return filep; +} + +/* Parse a file containing a single int */ +static int parse_int_file(int fatal, const char *fmt, ...) +{ + va_list args; + char path[PATH_MAX]; + FILE *filep; + int value; + + va_start(args, fmt); + vsnprintf(path, sizeof(path), fmt, args); + va_end(args); + if (fatal) { + filep = fopen_or_exit(path, "r"); + } else { + filep = fopen(path, "r"); + if (!filep) + return -1; + } + if (fscanf(filep, "%d", &value) != 1) + err(1, "%s: failed to parse number from file", path); + fclose(filep); + + return value; +} + +int cpufreq_sysfs_present(void) +{ + DIR *dir; + + dir = opendir("/sys/devices/system/cpu/cpu0/cpufreq"); + if (dir) { + closedir(dir); + return 1; + } + + return 0; +} + +int out_format_is_json(void) +{ + return out_format_json; +} + +static int get_stored_topology_info(int cpu, int *core_id, int *pkg_id, int *die_id) +{ + const char *pathname = "/var/run/isst_cpu_topology.dat"; + struct cpu_topology cpu_top; + FILE *fp; + int ret; + + fp = fopen(pathname, "rb"); + if (!fp) + return -1; + + ret = fseek(fp, cpu * sizeof(cpu_top), SEEK_SET); + if (ret) + goto err_ret; + + ret = fread(&cpu_top, sizeof(cpu_top), 1, fp); + if (ret != 1) { + ret = -1; + goto err_ret; + } + + *pkg_id = cpu_top.pkg_id; + *core_id = cpu_top.core_id; + *die_id = cpu_top.die_id; + ret = 0; + +err_ret: + fclose(fp); + + return ret; +} + +static void store_cpu_topology(void) +{ + const char *pathname = "/var/run/isst_cpu_topology.dat"; + FILE *fp; + int i; + + fp = fopen(pathname, "rb"); + if (fp) { + /* Mapping already exists */ + fclose(fp); + return; + } + + fp = fopen(pathname, "wb"); + if (!fp) { + fprintf(stderr, "Can't create file:%s\n", pathname); + return; + } + + fprintf(stderr, "Caching topology information\n"); + + for (i = 0; i < topo_max_cpus; ++i) { + struct cpu_topology cpu_top; + + cpu_top.core_id = parse_int_file(0, + "/sys/devices/system/cpu/cpu%d/topology/core_id", i); + if (cpu_top.core_id < 0) + cpu_top.core_id = -1; + + cpu_top.pkg_id = parse_int_file(0, + "/sys/devices/system/cpu/cpu%d/topology/physical_package_id", i); + if (cpu_top.pkg_id < 0) + cpu_top.pkg_id = -1; + + cpu_top.die_id = parse_int_file(0, + "/sys/devices/system/cpu/cpu%d/topology/die_id", i); + if (cpu_top.die_id < 0) + cpu_top.die_id = -1; + + cpu_top.cpu = i; + + if (fwrite(&cpu_top, sizeof(cpu_top), 1, fp) != 1) { + fprintf(stderr, "Can't write to:%s\n", pathname); + break; + } + } + + fclose(fp); +} + +int get_physical_package_id(int cpu) +{ + int ret; + + ret = parse_int_file(0, + "/sys/devices/system/cpu/cpu%d/topology/physical_package_id", + cpu); + if (ret < 0) { + int core_id, pkg_id, die_id; + + ret = get_stored_topology_info(cpu, &core_id, &pkg_id, &die_id); + if (!ret) + return pkg_id; + } + + return ret; +} + +int get_physical_core_id(int cpu) +{ + int ret; + + ret = parse_int_file(0, + "/sys/devices/system/cpu/cpu%d/topology/core_id", + cpu); + if (ret < 0) { + int core_id, pkg_id, die_id; + + ret = get_stored_topology_info(cpu, &core_id, &pkg_id, &die_id); + if (!ret) + return core_id; + } + + return ret; +} + +int get_physical_die_id(int cpu) +{ + int ret; + + ret = parse_int_file(0, + "/sys/devices/system/cpu/cpu%d/topology/die_id", + cpu); + if (ret < 0) { + int core_id, pkg_id, die_id; + + ret = get_stored_topology_info(cpu, &core_id, &pkg_id, &die_id); + if (!ret) + return die_id; + } + + if (ret < 0) + ret = 0; + + return ret; +} + +int get_cpufreq_base_freq(int cpu) +{ + return parse_int_file(0, "/sys/devices/system/cpu/cpu%d/cpufreq/base_frequency", cpu); +} + +int get_topo_max_cpus(void) +{ + return topo_max_cpus; +} + +static void set_cpu_online_offline(int cpu, int state) +{ + char buffer[128]; + int fd, ret; + + snprintf(buffer, sizeof(buffer), + "/sys/devices/system/cpu/cpu%d/online", cpu); + + fd = open(buffer, O_WRONLY); + if (fd < 0) { + if (!cpu && state) { + fprintf(stderr, "This system is not configured for CPU 0 online/offline\n"); + fprintf(stderr, "Ignoring online request for CPU 0 as this is already online\n"); + return; + } + err(-1, "%s open failed", buffer); + } + + if (state) + ret = write(fd, "1\n", 2); + else + ret = write(fd, "0\n", 2); + + if (ret == -1) + perror("Online/Offline: Operation failed\n"); + + close(fd); +} + +#define MAX_PACKAGE_COUNT 8 +#define MAX_DIE_PER_PACKAGE 2 +static void for_each_online_package_in_set(void (*callback)(int, void *, void *, + void *, void *), + void *arg1, void *arg2, void *arg3, + void *arg4) +{ + int max_packages[MAX_PACKAGE_COUNT * MAX_PACKAGE_COUNT]; + int pkg_index = 0, i; + + memset(max_packages, 0xff, sizeof(max_packages)); + for (i = 0; i < topo_max_cpus; ++i) { + int j, online, pkg_id, die_id = 0, skip = 0; + + if (!CPU_ISSET_S(i, present_cpumask_size, present_cpumask)) + continue; + if (i) + online = parse_int_file( + 1, "/sys/devices/system/cpu/cpu%d/online", i); + else + online = + 1; /* online entry for CPU 0 needs some special configs */ + + die_id = get_physical_die_id(i); + if (die_id < 0) + die_id = 0; + + pkg_id = parse_int_file(0, + "/sys/devices/system/cpu/cpu%d/topology/physical_package_id", i); + if (pkg_id < 0) + continue; + + /* Create an unique id for package, die combination to store */ + pkg_id = (MAX_PACKAGE_COUNT * pkg_id + die_id); + + for (j = 0; j < pkg_index; ++j) { + if (max_packages[j] == pkg_id) { + skip = 1; + break; + } + } + + if (!skip && online && callback) { + callback(i, arg1, arg2, arg3, arg4); + max_packages[pkg_index++] = pkg_id; + } + } +} + +static void for_each_online_target_cpu_in_set( + void (*callback)(int, void *, void *, void *, void *), void *arg1, + void *arg2, void *arg3, void *arg4) +{ + int i, found = 0; + + for (i = 0; i < topo_max_cpus; ++i) { + int online; + + if (!CPU_ISSET_S(i, target_cpumask_size, target_cpumask)) + continue; + if (i) + online = parse_int_file( + 1, "/sys/devices/system/cpu/cpu%d/online", i); + else + online = + 1; /* online entry for CPU 0 needs some special configs */ + + if (online && callback) { + callback(i, arg1, arg2, arg3, arg4); + found = 1; + } + } + + if (!found) + fprintf(stderr, "No valid CPU in the list\n"); +} + +#define BITMASK_SIZE 32 +static void set_max_cpu_num(void) +{ + FILE *filep; + unsigned long dummy; + int i; + + topo_max_cpus = 0; + for (i = 0; i < 256; ++i) { + char path[256]; + + snprintf(path, sizeof(path), + "/sys/devices/system/cpu/cpu%d/topology/thread_siblings", i); + filep = fopen(path, "r"); + if (filep) + break; + } + + if (!filep) { + fprintf(stderr, "Can't get max cpu number\n"); + exit(0); + } + + while (fscanf(filep, "%lx,", &dummy) == 1) + topo_max_cpus += BITMASK_SIZE; + fclose(filep); + + debug_printf("max cpus %d\n", topo_max_cpus); +} + +size_t alloc_cpu_set(cpu_set_t **cpu_set) +{ + cpu_set_t *_cpu_set; + size_t size; + + _cpu_set = CPU_ALLOC((topo_max_cpus + 1)); + if (_cpu_set == NULL) + err(3, "CPU_ALLOC"); + size = CPU_ALLOC_SIZE((topo_max_cpus + 1)); + CPU_ZERO_S(size, _cpu_set); + + *cpu_set = _cpu_set; + return size; +} + +void free_cpu_set(cpu_set_t *cpu_set) +{ + CPU_FREE(cpu_set); +} + +static int cpu_cnt[MAX_PACKAGE_COUNT][MAX_DIE_PER_PACKAGE]; +static long long core_mask[MAX_PACKAGE_COUNT][MAX_DIE_PER_PACKAGE]; +static void set_cpu_present_cpu_mask(void) +{ + size_t size; + DIR *dir; + int i; + + size = alloc_cpu_set(&present_cpumask); + present_cpumask_size = size; + for (i = 0; i < topo_max_cpus; ++i) { + char buffer[256]; + + snprintf(buffer, sizeof(buffer), + "/sys/devices/system/cpu/cpu%d", i); + dir = opendir(buffer); + if (dir) { + int pkg_id, die_id; + + CPU_SET_S(i, size, present_cpumask); + die_id = get_physical_die_id(i); + if (die_id < 0) + die_id = 0; + + pkg_id = get_physical_package_id(i); + if (pkg_id < 0) { + fprintf(stderr, "Failed to get package id, CPU %d may be offline\n", i); + continue; + } + if (pkg_id < MAX_PACKAGE_COUNT && + die_id < MAX_DIE_PER_PACKAGE) { + int core_id = get_physical_core_id(i); + + cpu_cnt[pkg_id][die_id]++; + core_mask[pkg_id][die_id] |= (1ULL << core_id); + } + } + closedir(dir); + } +} + +int get_max_punit_core_id(int pkg_id, int die_id) +{ + int max_id = 0; + int i; + + for (i = 0; i < topo_max_cpus; ++i) + { + if (!CPU_ISSET_S(i, present_cpumask_size, present_cpumask)) + continue; + + if (cpu_map[i].pkg_id == pkg_id && + cpu_map[i].die_id == die_id && + cpu_map[i].punit_cpu_core > max_id) + max_id = cpu_map[i].punit_cpu_core; + } + + return max_id; +} + +int get_cpu_count(int pkg_id, int die_id) +{ + if (pkg_id < MAX_PACKAGE_COUNT && die_id < MAX_DIE_PER_PACKAGE) + return cpu_cnt[pkg_id][die_id]; + + return 0; +} + +static void set_cpu_target_cpu_mask(void) +{ + size_t size; + int i; + + size = alloc_cpu_set(&target_cpumask); + target_cpumask_size = size; + for (i = 0; i < max_target_cpus; ++i) { + if (!CPU_ISSET_S(target_cpus[i], present_cpumask_size, + present_cpumask)) + continue; + + CPU_SET_S(target_cpus[i], size, target_cpumask); + } +} + +static void create_cpu_map(void) +{ + const char *pathname = "/dev/isst_interface"; + int i, fd = 0; + struct isst_if_cpu_maps map; + + cpu_map = malloc(sizeof(*cpu_map) * topo_max_cpus); + if (!cpu_map) + err(3, "cpumap"); + + fd = open(pathname, O_RDWR); + if (fd < 0) + err(-1, "%s open failed", pathname); + + for (i = 0; i < topo_max_cpus; ++i) { + if (!CPU_ISSET_S(i, present_cpumask_size, present_cpumask)) + continue; + + map.cmd_count = 1; + map.cpu_map[0].logical_cpu = i; + + debug_printf(" map logical_cpu:%d\n", + map.cpu_map[0].logical_cpu); + if (ioctl(fd, ISST_IF_GET_PHY_ID, &map) == -1) { + perror("ISST_IF_GET_PHY_ID"); + fprintf(outf, "Error: map logical_cpu:%d\n", + map.cpu_map[0].logical_cpu); + continue; + } + cpu_map[i].core_id = get_physical_core_id(i); + cpu_map[i].pkg_id = get_physical_package_id(i); + cpu_map[i].die_id = get_physical_die_id(i); + cpu_map[i].punit_cpu = map.cpu_map[0].physical_cpu; + cpu_map[i].punit_cpu_core = (map.cpu_map[0].physical_cpu >> + 1); // shift to get core id + + debug_printf( + "map logical_cpu:%d core: %d die:%d pkg:%d punit_cpu:%d punit_core:%d\n", + i, cpu_map[i].core_id, cpu_map[i].die_id, + cpu_map[i].pkg_id, cpu_map[i].punit_cpu, + cpu_map[i].punit_cpu_core); + } + + if (fd) + close(fd); +} + +int find_logical_cpu(int pkg_id, int die_id, int punit_core_id) +{ + int i; + + for (i = 0; i < topo_max_cpus; ++i) { + if (cpu_map[i].pkg_id == pkg_id && + cpu_map[i].die_id == die_id && + cpu_map[i].punit_cpu_core == punit_core_id) + return i; + } + + return -EINVAL; +} + +void set_cpu_mask_from_punit_coremask(int cpu, unsigned long long core_mask, + size_t core_cpumask_size, + cpu_set_t *core_cpumask, int *cpu_cnt) +{ + int i, cnt = 0; + int die_id, pkg_id; + + *cpu_cnt = 0; + die_id = get_physical_die_id(cpu); + pkg_id = get_physical_package_id(cpu); + + for (i = 0; i < 64; ++i) { + if (core_mask & BIT_ULL(i)) { + int j; + + for (j = 0; j < topo_max_cpus; ++j) { + if (!CPU_ISSET_S(j, present_cpumask_size, present_cpumask)) + continue; + + if (cpu_map[j].pkg_id == pkg_id && + cpu_map[j].die_id == die_id && + cpu_map[j].punit_cpu_core == i) { + CPU_SET_S(j, core_cpumask_size, + core_cpumask); + ++cnt; + } + } + } + } + + *cpu_cnt = cnt; +} + +int find_phy_core_num(int logical_cpu) +{ + if (logical_cpu < topo_max_cpus) + return cpu_map[logical_cpu].punit_cpu_core; + + return -EINVAL; +} + +static int isst_send_mmio_command(unsigned int cpu, unsigned int reg, int write, + unsigned int *value) +{ + struct isst_if_io_regs io_regs; + const char *pathname = "/dev/isst_interface"; + int cmd; + int fd; + + debug_printf("mmio_cmd cpu:%d reg:%d write:%d\n", cpu, reg, write); + + fd = open(pathname, O_RDWR); + if (fd < 0) + err(-1, "%s open failed", pathname); + + io_regs.req_count = 1; + io_regs.io_reg[0].logical_cpu = cpu; + io_regs.io_reg[0].reg = reg; + cmd = ISST_IF_IO_CMD; + if (write) { + io_regs.io_reg[0].read_write = 1; + io_regs.io_reg[0].value = *value; + } else { + io_regs.io_reg[0].read_write = 0; + } + + if (ioctl(fd, cmd, &io_regs) == -1) { + if (errno == ENOTTY) { + perror("ISST_IF_IO_COMMAND\n"); + fprintf(stderr, "Check presence of kernel modules: isst_if_mmio\n"); + exit(0); + } + fprintf(outf, "Error: mmio_cmd cpu:%d reg:%x read_write:%x\n", + cpu, reg, write); + } else { + if (!write) + *value = io_regs.io_reg[0].value; + + debug_printf( + "mmio_cmd response: cpu:%d reg:%x rd_write:%x resp:%x\n", + cpu, reg, write, *value); + } + + close(fd); + + return 0; +} + +int isst_send_mbox_command(unsigned int cpu, unsigned char command, + unsigned char sub_command, unsigned int parameter, + unsigned int req_data, unsigned int *resp) +{ + const char *pathname = "/dev/isst_interface"; + int fd, retry; + struct isst_if_mbox_cmds mbox_cmds = { 0 }; + + debug_printf( + "mbox_send: cpu:%d command:%x sub_command:%x parameter:%x req_data:%x\n", + cpu, command, sub_command, parameter, req_data); + + if (!is_skx_based_platform() && command == CONFIG_CLOS && + sub_command != CLOS_PM_QOS_CONFIG) { + unsigned int value; + int write = 0; + int clos_id, core_id, ret = 0; + + debug_printf("CPU %d\n", cpu); + + if (parameter & BIT(MBOX_CMD_WRITE_BIT)) { + value = req_data; + write = 1; + } + + switch (sub_command) { + case CLOS_PQR_ASSOC: + core_id = parameter & 0xff; + ret = isst_send_mmio_command( + cpu, PQR_ASSOC_OFFSET + core_id * 4, write, + &value); + if (!ret && !write) + *resp = value; + break; + case CLOS_PM_CLOS: + clos_id = parameter & 0x03; + ret = isst_send_mmio_command( + cpu, PM_CLOS_OFFSET + clos_id * 4, write, + &value); + if (!ret && !write) + *resp = value; + break; + case CLOS_STATUS: + break; + default: + break; + } + return ret; + } + + mbox_cmds.cmd_count = 1; + mbox_cmds.mbox_cmd[0].logical_cpu = cpu; + mbox_cmds.mbox_cmd[0].command = command; + mbox_cmds.mbox_cmd[0].sub_command = sub_command; + mbox_cmds.mbox_cmd[0].parameter = parameter; + mbox_cmds.mbox_cmd[0].req_data = req_data; + + if (mbox_delay) + usleep(mbox_delay * 1000); + + fd = open(pathname, O_RDWR); + if (fd < 0) + err(-1, "%s open failed", pathname); + + retry = mbox_retries; + + do { + if (ioctl(fd, ISST_IF_MBOX_COMMAND, &mbox_cmds) == -1) { + if (errno == ENOTTY) { + perror("ISST_IF_MBOX_COMMAND\n"); + fprintf(stderr, "Check presence of kernel modules: isst_if_mbox_pci or isst_if_mbox_msr\n"); + exit(0); + } + debug_printf( + "Error: mbox_cmd cpu:%d command:%x sub_command:%x parameter:%x req_data:%x errorno:%d\n", + cpu, command, sub_command, parameter, req_data, errno); + --retry; + } else { + *resp = mbox_cmds.mbox_cmd[0].resp_data; + debug_printf( + "mbox_cmd response: cpu:%d command:%x sub_command:%x parameter:%x req_data:%x resp:%x\n", + cpu, command, sub_command, parameter, req_data, *resp); + break; + } + } while (retry); + + close(fd); + + if (!retry) { + debug_printf("Failed mbox command even after retries\n"); + return -1; + + } + return 0; +} + +int isst_send_msr_command(unsigned int cpu, unsigned int msr, int write, + unsigned long long *req_resp) +{ + struct isst_if_msr_cmds msr_cmds; + const char *pathname = "/dev/isst_interface"; + int fd; + + fd = open(pathname, O_RDWR); + if (fd < 0) + err(-1, "%s open failed", pathname); + + msr_cmds.cmd_count = 1; + msr_cmds.msr_cmd[0].logical_cpu = cpu; + msr_cmds.msr_cmd[0].msr = msr; + msr_cmds.msr_cmd[0].read_write = write; + if (write) + msr_cmds.msr_cmd[0].data = *req_resp; + + if (ioctl(fd, ISST_IF_MSR_COMMAND, &msr_cmds) == -1) { + perror("ISST_IF_MSR_COMMAND"); + fprintf(outf, "Error: msr_cmd cpu:%d msr:%x read_write:%d\n", + cpu, msr, write); + } else { + if (!write) + *req_resp = msr_cmds.msr_cmd[0].data; + + debug_printf( + "msr_cmd response: cpu:%d msr:%x rd_write:%x resp:%llx %llx\n", + cpu, msr, write, *req_resp, msr_cmds.msr_cmd[0].data); + } + + close(fd); + + return 0; +} + +static int isst_fill_platform_info(void) +{ + const char *pathname = "/dev/isst_interface"; + int fd; + + fd = open(pathname, O_RDWR); + if (fd < 0) + err(-1, "%s open failed", pathname); + + if (ioctl(fd, ISST_IF_GET_PLATFORM_INFO, &isst_platform_info) == -1) { + perror("ISST_IF_GET_PLATFORM_INFO"); + close(fd); + return -1; + } + + close(fd); + + if (isst_platform_info.api_version > supported_api_ver) { + printf("Incompatible API versions; Upgrade of tool is required\n"); + return -1; + } + return 0; +} + +static void isst_print_extended_platform_info(void) +{ + int cp_state, cp_cap, fact_support = 0, pbf_support = 0; + struct isst_pkg_ctdp_level_info ctdp_level; + struct isst_pkg_ctdp pkg_dev; + int ret, i, j; + FILE *filep; + + for (i = 0; i < 256; ++i) { + char path[256]; + + snprintf(path, sizeof(path), + "/sys/devices/system/cpu/cpu%d/topology/thread_siblings", i); + filep = fopen(path, "r"); + if (filep) + break; + } + + if (!filep) + return; + + fclose(filep); + + ret = isst_get_ctdp_levels(i, &pkg_dev); + if (ret) + return; + + if (pkg_dev.enabled) { + fprintf(outf, "Intel(R) SST-PP (feature perf-profile) is supported\n"); + } else { + fprintf(outf, "Intel(R) SST-PP (feature perf-profile) is not supported\n"); + fprintf(outf, "Only performance level 0 (base level) is present\n"); + } + + if (pkg_dev.locked) + fprintf(outf, "TDP level change control is locked\n"); + else + fprintf(outf, "TDP level change control is unlocked, max level: %d \n", pkg_dev.levels); + + for (j = 0; j <= pkg_dev.levels; ++j) { + ret = isst_get_ctdp_control(i, j, &ctdp_level); + if (ret) + continue; + + if (!fact_support && ctdp_level.fact_support) + fact_support = 1; + + if (!pbf_support && ctdp_level.pbf_support) + pbf_support = 1; + } + + if (fact_support) + fprintf(outf, "Intel(R) SST-TF (feature turbo-freq) is supported\n"); + else + fprintf(outf, "Intel(R) SST-TF (feature turbo-freq) is not supported\n"); + + if (pbf_support) + fprintf(outf, "Intel(R) SST-BF (feature base-freq) is supported\n"); + else + fprintf(outf, "Intel(R) SST-BF (feature base-freq) is not supported\n"); + + ret = isst_read_pm_config(i, &cp_state, &cp_cap); + if (cp_cap) + fprintf(outf, "Intel(R) SST-CP (feature core-power) is supported\n"); + else + fprintf(outf, "Intel(R) SST-CP (feature core-power) is not supported\n"); +} + +static void isst_print_platform_information(void) +{ + struct isst_if_platform_info platform_info; + const char *pathname = "/dev/isst_interface"; + int fd; + + if (is_clx_n_platform()) { + fprintf(stderr, "\nThis option in not supported on this platform\n"); + exit(0); + } + + fd = open(pathname, O_RDWR); + if (fd < 0) + err(-1, "%s open failed", pathname); + + if (ioctl(fd, ISST_IF_GET_PLATFORM_INFO, &platform_info) == -1) { + perror("ISST_IF_GET_PLATFORM_INFO"); + } else { + fprintf(outf, "Platform: API version : %d\n", + platform_info.api_version); + fprintf(outf, "Platform: Driver version : %d\n", + platform_info.driver_version); + fprintf(outf, "Platform: mbox supported : %d\n", + platform_info.mbox_supported); + fprintf(outf, "Platform: mmio supported : %d\n", + platform_info.mmio_supported); + isst_print_extended_platform_info(); + } + + close(fd); + + exit(0); +} + +static char *local_str0, *local_str1; +static void exec_on_get_ctdp_cpu(int cpu, void *arg1, void *arg2, void *arg3, + void *arg4) +{ + int (*fn_ptr)(int cpu, void *arg); + int ret; + + fn_ptr = arg1; + ret = fn_ptr(cpu, arg2); + if (ret) + isst_display_error_info_message(1, "get_tdp_* failed", 0, 0); + else + isst_ctdp_display_core_info(cpu, outf, arg3, + *(unsigned int *)arg4, + local_str0, local_str1); +} + +#define _get_tdp_level(desc, suffix, object, help, str0, str1) \ + static void get_tdp_##object(int arg) \ + { \ + struct isst_pkg_ctdp ctdp; \ +\ + if (cmd_help) { \ + fprintf(stderr, \ + "Print %s [No command arguments are required]\n", \ + help); \ + exit(0); \ + } \ + local_str0 = str0; \ + local_str1 = str1; \ + isst_ctdp_display_information_start(outf); \ + if (max_target_cpus) \ + for_each_online_target_cpu_in_set( \ + exec_on_get_ctdp_cpu, isst_get_ctdp_##suffix, \ + &ctdp, desc, &ctdp.object); \ + else \ + for_each_online_package_in_set(exec_on_get_ctdp_cpu, \ + isst_get_ctdp_##suffix, \ + &ctdp, desc, \ + &ctdp.object); \ + isst_ctdp_display_information_end(outf); \ + } + +_get_tdp_level("get-config-levels", levels, levels, "Max TDP level", NULL, NULL); +_get_tdp_level("get-config-version", levels, version, "TDP version", NULL, NULL); +_get_tdp_level("get-config-enabled", levels, enabled, "perf-profile enable status", "disabled", "enabled"); +_get_tdp_level("get-config-current_level", levels, current_level, + "Current TDP Level", NULL, NULL); +_get_tdp_level("get-lock-status", levels, locked, "TDP lock status", "unlocked", "locked"); + +struct isst_pkg_ctdp clx_n_pkg_dev; + +static int clx_n_get_base_ratio(void) +{ + FILE *fp; + char *begin, *end, *line = NULL; + char number[5]; + float value = 0; + size_t n = 0; + + fp = fopen("/proc/cpuinfo", "r"); + if (!fp) + err(-1, "cannot open /proc/cpuinfo\n"); + + while (getline(&line, &n, fp) > 0) { + if (strstr(line, "model name")) { + /* this is true for CascadeLake-N */ + begin = strstr(line, "@ ") + 2; + end = strstr(line, "GHz"); + strncpy(number, begin, end - begin); + value = atof(number) * 10; + break; + } + } + free(line); + fclose(fp); + + return (int)(value); +} + +static int clx_n_config(int cpu) +{ + int i, ret, pkg_id, die_id; + unsigned long cpu_bf; + struct isst_pkg_ctdp_level_info *ctdp_level; + struct isst_pbf_info *pbf_info; + + ctdp_level = &clx_n_pkg_dev.ctdp_level[0]; + pbf_info = &ctdp_level->pbf_info; + ctdp_level->core_cpumask_size = + alloc_cpu_set(&ctdp_level->core_cpumask); + + /* find the frequency base ratio */ + ctdp_level->tdp_ratio = clx_n_get_base_ratio(); + if (ctdp_level->tdp_ratio == 0) { + debug_printf("CLX: cn base ratio is zero\n"); + ret = -1; + goto error_ret; + } + + /* find the high and low priority frequencies */ + pbf_info->p1_high = 0; + pbf_info->p1_low = ~0; + + pkg_id = get_physical_package_id(cpu); + die_id = get_physical_die_id(cpu); + + for (i = 0; i < topo_max_cpus; i++) { + if (!CPU_ISSET_S(i, present_cpumask_size, present_cpumask)) + continue; + + if (pkg_id != get_physical_package_id(i) || + die_id != get_physical_die_id(i)) + continue; + + CPU_SET_S(i, ctdp_level->core_cpumask_size, + ctdp_level->core_cpumask); + + cpu_bf = parse_int_file(1, + "/sys/devices/system/cpu/cpu%d/cpufreq/base_frequency", + i); + if (cpu_bf > pbf_info->p1_high) + pbf_info->p1_high = cpu_bf; + if (cpu_bf < pbf_info->p1_low) + pbf_info->p1_low = cpu_bf; + } + + if (pbf_info->p1_high == ~0UL) { + debug_printf("CLX: maximum base frequency not set\n"); + ret = -1; + goto error_ret; + } + + if (pbf_info->p1_low == 0) { + debug_printf("CLX: minimum base frequency not set\n"); + ret = -1; + goto error_ret; + } + + /* convert frequencies back to ratios */ + pbf_info->p1_high = pbf_info->p1_high / 100000; + pbf_info->p1_low = pbf_info->p1_low / 100000; + + /* create high priority cpu mask */ + pbf_info->core_cpumask_size = alloc_cpu_set(&pbf_info->core_cpumask); + for (i = 0; i < topo_max_cpus; i++) { + if (!CPU_ISSET_S(i, present_cpumask_size, present_cpumask)) + continue; + + if (pkg_id != get_physical_package_id(i) || + die_id != get_physical_die_id(i)) + continue; + + cpu_bf = parse_int_file(1, + "/sys/devices/system/cpu/cpu%d/cpufreq/base_frequency", + i); + cpu_bf = cpu_bf / 100000; + if (cpu_bf == pbf_info->p1_high) + CPU_SET_S(i, pbf_info->core_cpumask_size, + pbf_info->core_cpumask); + } + + /* extra ctdp & pbf struct parameters */ + ctdp_level->processed = 1; + ctdp_level->pbf_support = 1; /* PBF is always supported and enabled */ + ctdp_level->pbf_enabled = 1; + ctdp_level->fact_support = 0; /* FACT is never supported */ + ctdp_level->fact_enabled = 0; + + return 0; + +error_ret: + free_cpu_set(ctdp_level->core_cpumask); + return ret; +} + +static void dump_clx_n_config_for_cpu(int cpu, void *arg1, void *arg2, + void *arg3, void *arg4) +{ + int ret; + + if (tdp_level != 0xff && tdp_level != 0) { + isst_display_error_info_message(1, "Invalid level", 1, tdp_level); + exit(0); + } + + ret = clx_n_config(cpu); + if (ret) { + debug_printf("clx_n_config failed"); + } else { + struct isst_pkg_ctdp_level_info *ctdp_level; + struct isst_pbf_info *pbf_info; + + ctdp_level = &clx_n_pkg_dev.ctdp_level[0]; + pbf_info = &ctdp_level->pbf_info; + clx_n_pkg_dev.processed = 1; + isst_ctdp_display_information(cpu, outf, tdp_level, &clx_n_pkg_dev); + free_cpu_set(ctdp_level->core_cpumask); + free_cpu_set(pbf_info->core_cpumask); + } +} + +static void dump_isst_config_for_cpu(int cpu, void *arg1, void *arg2, + void *arg3, void *arg4) +{ + struct isst_pkg_ctdp pkg_dev; + int ret; + + memset(&pkg_dev, 0, sizeof(pkg_dev)); + ret = isst_get_process_ctdp(cpu, tdp_level, &pkg_dev); + if (ret) { + isst_display_error_info_message(1, "Failed to get perf-profile info on cpu", 1, cpu); + isst_ctdp_display_information_end(outf); + exit(1); + } else { + isst_ctdp_display_information(cpu, outf, tdp_level, &pkg_dev); + isst_get_process_ctdp_complete(cpu, &pkg_dev); + } +} + +static void dump_isst_config(int arg) +{ + void *fn; + + if (cmd_help) { + fprintf(stderr, + "Print Intel(R) Speed Select Technology Performance profile configuration\n"); + fprintf(stderr, + "including base frequency and turbo frequency configurations\n"); + fprintf(stderr, "Optional: -l|--level : Specify tdp level\n"); + fprintf(stderr, + "\tIf no arguments, dump information for all TDP levels\n"); + exit(0); + } + + if (!is_clx_n_platform()) + fn = dump_isst_config_for_cpu; + else + fn = dump_clx_n_config_for_cpu; + + isst_ctdp_display_information_start(outf); + + if (max_target_cpus) + for_each_online_target_cpu_in_set(fn, NULL, NULL, NULL, NULL); + else + for_each_online_package_in_set(fn, NULL, NULL, NULL, NULL); + + isst_ctdp_display_information_end(outf); +} + +static void adjust_scaling_max_from_base_freq(int cpu); + +static void set_tdp_level_for_cpu(int cpu, void *arg1, void *arg2, void *arg3, + void *arg4) +{ + int ret; + + ret = isst_set_tdp_level(cpu, tdp_level); + if (ret) { + isst_display_error_info_message(1, "Set TDP level failed", 0, 0); + isst_ctdp_display_information_end(outf); + exit(1); + } else { + isst_display_result(cpu, outf, "perf-profile", "set_tdp_level", + ret); + if (force_online_offline) { + struct isst_pkg_ctdp_level_info ctdp_level; + int pkg_id = get_physical_package_id(cpu); + int die_id = get_physical_die_id(cpu); + + /* Wait for updated base frequencies */ + usleep(2000); + + fprintf(stderr, "Option is set to online/offline\n"); + ctdp_level.core_cpumask_size = + alloc_cpu_set(&ctdp_level.core_cpumask); + ret = isst_get_coremask_info(cpu, tdp_level, &ctdp_level); + if (ret) { + isst_display_error_info_message(1, "Can't get coremask, online/offline option is ignored", 0, 0); + return; + } + if (ctdp_level.cpu_count) { + int i, max_cpus = get_topo_max_cpus(); + for (i = 0; i < max_cpus; ++i) { + if (pkg_id != get_physical_package_id(i) || die_id != get_physical_die_id(i)) + continue; + if (CPU_ISSET_S(i, ctdp_level.core_cpumask_size, ctdp_level.core_cpumask)) { + fprintf(stderr, "online cpu %d\n", i); + set_cpu_online_offline(i, 1); + adjust_scaling_max_from_base_freq(i); + } else { + fprintf(stderr, "offline cpu %d\n", i); + set_cpu_online_offline(i, 0); + } + } + } + } + } +} + +static void set_tdp_level(int arg) +{ + if (cmd_help) { + fprintf(stderr, "Set Config TDP level\n"); + fprintf(stderr, + "\t Arguments: -l|--level : Specify tdp level\n"); + fprintf(stderr, + "\t Optional Arguments: -o | online : online/offline for the tdp level\n"); + fprintf(stderr, + "\t online/offline operation has limitations, refer to Linux hotplug documentation\n"); + exit(0); + } + + if (tdp_level == 0xff) { + isst_display_error_info_message(1, "Invalid command: specify tdp_level", 0, 0); + exit(1); + } + isst_ctdp_display_information_start(outf); + if (max_target_cpus) + for_each_online_target_cpu_in_set(set_tdp_level_for_cpu, NULL, + NULL, NULL, NULL); + else + for_each_online_package_in_set(set_tdp_level_for_cpu, NULL, + NULL, NULL, NULL); + isst_ctdp_display_information_end(outf); +} + +static void clx_n_dump_pbf_config_for_cpu(int cpu, void *arg1, void *arg2, + void *arg3, void *arg4) +{ + int ret; + + ret = clx_n_config(cpu); + if (ret) { + isst_display_error_info_message(1, "clx_n_config failed", 0, 0); + } else { + struct isst_pkg_ctdp_level_info *ctdp_level; + struct isst_pbf_info *pbf_info; + + ctdp_level = &clx_n_pkg_dev.ctdp_level[0]; + pbf_info = &ctdp_level->pbf_info; + isst_pbf_display_information(cpu, outf, tdp_level, pbf_info); + free_cpu_set(ctdp_level->core_cpumask); + free_cpu_set(pbf_info->core_cpumask); + } +} + +static void dump_pbf_config_for_cpu(int cpu, void *arg1, void *arg2, void *arg3, + void *arg4) +{ + struct isst_pbf_info pbf_info; + int ret; + + ret = isst_get_pbf_info(cpu, tdp_level, &pbf_info); + if (ret) { + isst_display_error_info_message(1, "Failed to get base-freq info at this level", 1, tdp_level); + isst_ctdp_display_information_end(outf); + exit(1); + } else { + isst_pbf_display_information(cpu, outf, tdp_level, &pbf_info); + isst_get_pbf_info_complete(&pbf_info); + } +} + +static void dump_pbf_config(int arg) +{ + void *fn; + + if (cmd_help) { + fprintf(stderr, + "Print Intel(R) Speed Select Technology base frequency configuration for a TDP level\n"); + fprintf(stderr, + "\tArguments: -l|--level : Specify tdp level\n"); + exit(0); + } + + if (tdp_level == 0xff) { + isst_display_error_info_message(1, "Invalid command: specify tdp_level", 0, 0); + exit(1); + } + + if (!is_clx_n_platform()) + fn = dump_pbf_config_for_cpu; + else + fn = clx_n_dump_pbf_config_for_cpu; + + isst_ctdp_display_information_start(outf); + + if (max_target_cpus) + for_each_online_target_cpu_in_set(fn, NULL, NULL, NULL, NULL); + else + for_each_online_package_in_set(fn, NULL, NULL, NULL, NULL); + + isst_ctdp_display_information_end(outf); +} + +static int set_clos_param(int cpu, int clos, int epp, int wt, int min, int max) +{ + struct isst_clos_config clos_config; + int ret; + + ret = isst_pm_get_clos(cpu, clos, &clos_config); + if (ret) { + isst_display_error_info_message(1, "isst_pm_get_clos failed", 0, 0); + return ret; + } + clos_config.clos_min = min; + clos_config.clos_max = max; + clos_config.epp = epp; + clos_config.clos_prop_prio = wt; + ret = isst_set_clos(cpu, clos, &clos_config); + if (ret) { + isst_display_error_info_message(1, "isst_set_clos failed", 0, 0); + return ret; + } + + return 0; +} + +static int set_cpufreq_scaling_min_max(int cpu, int max, int freq) +{ + char buffer[128], freq_str[16]; + int fd, ret, len; + + if (max) + snprintf(buffer, sizeof(buffer), + "/sys/devices/system/cpu/cpu%d/cpufreq/scaling_max_freq", cpu); + else + snprintf(buffer, sizeof(buffer), + "/sys/devices/system/cpu/cpu%d/cpufreq/scaling_min_freq", cpu); + + fd = open(buffer, O_WRONLY); + if (fd < 0) + return fd; + + snprintf(freq_str, sizeof(freq_str), "%d", freq); + len = strlen(freq_str); + ret = write(fd, freq_str, len); + if (ret == -1) { + close(fd); + return ret; + } + close(fd); + + return 0; +} + +static int no_turbo(void) +{ + return parse_int_file(0, "/sys/devices/system/cpu/intel_pstate/no_turbo"); +} + +static void adjust_scaling_max_from_base_freq(int cpu) +{ + int base_freq, scaling_max_freq; + + scaling_max_freq = parse_int_file(0, "/sys/devices/system/cpu/cpu%d/cpufreq/scaling_max_freq", cpu); + base_freq = get_cpufreq_base_freq(cpu); + if (scaling_max_freq < base_freq || no_turbo()) + set_cpufreq_scaling_min_max(cpu, 1, base_freq); +} + +static void adjust_scaling_min_from_base_freq(int cpu) +{ + int base_freq, scaling_min_freq; + + scaling_min_freq = parse_int_file(0, "/sys/devices/system/cpu/cpu%d/cpufreq/scaling_min_freq", cpu); + base_freq = get_cpufreq_base_freq(cpu); + if (scaling_min_freq < base_freq) + set_cpufreq_scaling_min_max(cpu, 0, base_freq); +} + +static int set_clx_pbf_cpufreq_scaling_min_max(int cpu) +{ + struct isst_pkg_ctdp_level_info *ctdp_level; + struct isst_pbf_info *pbf_info; + int i, pkg_id, die_id, freq, freq_high, freq_low; + int ret; + + ret = clx_n_config(cpu); + if (ret) { + debug_printf("cpufreq_scaling_min_max failed for CLX"); + return ret; + } + + ctdp_level = &clx_n_pkg_dev.ctdp_level[0]; + pbf_info = &ctdp_level->pbf_info; + freq_high = pbf_info->p1_high * 100000; + freq_low = pbf_info->p1_low * 100000; + + pkg_id = get_physical_package_id(cpu); + die_id = get_physical_die_id(cpu); + for (i = 0; i < get_topo_max_cpus(); ++i) { + if (pkg_id != get_physical_package_id(i) || + die_id != get_physical_die_id(i)) + continue; + + if (CPU_ISSET_S(i, pbf_info->core_cpumask_size, + pbf_info->core_cpumask)) + freq = freq_high; + else + freq = freq_low; + + set_cpufreq_scaling_min_max(i, 1, freq); + set_cpufreq_scaling_min_max(i, 0, freq); + } + + return 0; +} + +static int set_cpufreq_scaling_min_max_from_cpuinfo(int cpu, int cpuinfo_max, int scaling_max) +{ + char buffer[128], min_freq[16]; + int fd, ret, len; + + if (!CPU_ISSET_S(cpu, present_cpumask_size, present_cpumask)) + return -1; + + if (cpuinfo_max) + snprintf(buffer, sizeof(buffer), + "/sys/devices/system/cpu/cpu%d/cpufreq/cpuinfo_max_freq", cpu); + else + snprintf(buffer, sizeof(buffer), + "/sys/devices/system/cpu/cpu%d/cpufreq/cpuinfo_min_freq", cpu); + + fd = open(buffer, O_RDONLY); + if (fd < 0) + return fd; + + len = read(fd, min_freq, sizeof(min_freq)); + close(fd); + + if (len < 0) + return len; + + if (scaling_max) + snprintf(buffer, sizeof(buffer), + "/sys/devices/system/cpu/cpu%d/cpufreq/scaling_max_freq", cpu); + else + snprintf(buffer, sizeof(buffer), + "/sys/devices/system/cpu/cpu%d/cpufreq/scaling_min_freq", cpu); + + fd = open(buffer, O_WRONLY); + if (fd < 0) + return fd; + + len = strlen(min_freq); + ret = write(fd, min_freq, len); + if (ret == -1) { + close(fd); + return ret; + } + close(fd); + + return 0; +} + +static void set_scaling_min_to_cpuinfo_max(int cpu) +{ + int i, pkg_id, die_id; + + pkg_id = get_physical_package_id(cpu); + die_id = get_physical_die_id(cpu); + for (i = 0; i < get_topo_max_cpus(); ++i) { + if (pkg_id != get_physical_package_id(i) || + die_id != get_physical_die_id(i)) + continue; + + set_cpufreq_scaling_min_max_from_cpuinfo(i, 1, 0); + adjust_scaling_min_from_base_freq(i); + } +} + +static void set_scaling_min_to_cpuinfo_min(int cpu) +{ + int i, pkg_id, die_id; + + pkg_id = get_physical_package_id(cpu); + die_id = get_physical_die_id(cpu); + for (i = 0; i < get_topo_max_cpus(); ++i) { + if (pkg_id != get_physical_package_id(i) || + die_id != get_physical_die_id(i)) + continue; + + set_cpufreq_scaling_min_max_from_cpuinfo(i, 0, 0); + } +} + +static void set_scaling_max_to_cpuinfo_max(int cpu) +{ + int i, pkg_id, die_id; + + pkg_id = get_physical_package_id(cpu); + die_id = get_physical_die_id(cpu); + for (i = 0; i < get_topo_max_cpus(); ++i) { + if (pkg_id != get_physical_package_id(i) || + die_id != get_physical_die_id(i)) + continue; + + set_cpufreq_scaling_min_max_from_cpuinfo(i, 1, 1); + } +} + +static int set_core_priority_and_min(int cpu, int mask_size, + cpu_set_t *cpu_mask, int min_high, + int min_low) +{ + int pkg_id, die_id, ret, i; + + if (!CPU_COUNT_S(mask_size, cpu_mask)) + return -1; + + ret = set_clos_param(cpu, 0, 0, 0, min_high, 0xff); + if (ret) + return ret; + + ret = set_clos_param(cpu, 1, 15, 15, min_low, 0xff); + if (ret) + return ret; + + ret = set_clos_param(cpu, 2, 15, 15, min_low, 0xff); + if (ret) + return ret; + + ret = set_clos_param(cpu, 3, 15, 15, min_low, 0xff); + if (ret) + return ret; + + pkg_id = get_physical_package_id(cpu); + die_id = get_physical_die_id(cpu); + for (i = 0; i < get_topo_max_cpus(); ++i) { + int clos; + + if (pkg_id != get_physical_package_id(i) || + die_id != get_physical_die_id(i)) + continue; + + if (CPU_ISSET_S(i, mask_size, cpu_mask)) + clos = 0; + else + clos = 3; + + debug_printf("Associate cpu: %d clos: %d\n", i, clos); + ret = isst_clos_associate(i, clos); + if (ret) { + isst_display_error_info_message(1, "isst_clos_associate failed", 0, 0); + return ret; + } + } + + return 0; +} + +static int set_pbf_core_power(int cpu) +{ + struct isst_pbf_info pbf_info; + struct isst_pkg_ctdp pkg_dev; + int ret; + + ret = isst_get_ctdp_levels(cpu, &pkg_dev); + if (ret) { + debug_printf("isst_get_ctdp_levels failed"); + return ret; + } + debug_printf("Current_level: %d\n", pkg_dev.current_level); + + ret = isst_get_pbf_info(cpu, pkg_dev.current_level, &pbf_info); + if (ret) { + debug_printf("isst_get_pbf_info failed"); + return ret; + } + debug_printf("p1_high: %d p1_low: %d\n", pbf_info.p1_high, + pbf_info.p1_low); + + ret = set_core_priority_and_min(cpu, pbf_info.core_cpumask_size, + pbf_info.core_cpumask, + pbf_info.p1_high, pbf_info.p1_low); + if (ret) { + debug_printf("set_core_priority_and_min failed"); + return ret; + } + + ret = isst_pm_qos_config(cpu, 1, 1); + if (ret) { + debug_printf("isst_pm_qos_config failed"); + return ret; + } + + return 0; +} + +static void set_pbf_for_cpu(int cpu, void *arg1, void *arg2, void *arg3, + void *arg4) +{ + struct isst_pkg_ctdp_level_info ctdp_level; + struct isst_pkg_ctdp pkg_dev; + int ret; + int status = *(int *)arg4; + + if (is_clx_n_platform()) { + ret = 0; + if (status) { + set_clx_pbf_cpufreq_scaling_min_max(cpu); + + } else { + set_scaling_max_to_cpuinfo_max(cpu); + set_scaling_min_to_cpuinfo_min(cpu); + } + goto disp_result; + } + + ret = isst_get_ctdp_levels(cpu, &pkg_dev); + if (ret) { + isst_display_error_info_message(1, "Failed to get number of levels", 0, 0); + goto disp_result; + } + + ret = isst_get_ctdp_control(cpu, pkg_dev.current_level, &ctdp_level); + if (ret) { + isst_display_error_info_message(1, "Failed to get current level", 0, 0); + goto disp_result; + } + + if (!ctdp_level.pbf_support) { + isst_display_error_info_message(1, "base-freq feature is not present at this level", 1, pkg_dev.current_level); + ret = -1; + goto disp_result; + } + + if (auto_mode && status) { + ret = set_pbf_core_power(cpu); + if (ret) + goto disp_result; + } + + ret = isst_set_pbf_fact_status(cpu, 1, status); + if (ret) { + debug_printf("isst_set_pbf_fact_status failed"); + if (auto_mode) + isst_pm_qos_config(cpu, 0, 0); + } else { + if (auto_mode) { + if (status) + set_scaling_min_to_cpuinfo_max(cpu); + else + set_scaling_min_to_cpuinfo_min(cpu); + } + } + + if (auto_mode && !status) + isst_pm_qos_config(cpu, 0, 1); + +disp_result: + if (status) + isst_display_result(cpu, outf, "base-freq", "enable", + ret); + else + isst_display_result(cpu, outf, "base-freq", "disable", + ret); +} + +static void set_pbf_enable(int arg) +{ + int enable = arg; + + if (cmd_help) { + if (enable) { + fprintf(stderr, + "Enable Intel Speed Select Technology base frequency feature\n"); + if (is_clx_n_platform()) { + fprintf(stderr, + "\tOn this platform this command doesn't enable feature in the hardware.\n"); + fprintf(stderr, + "\tIt updates the cpufreq scaling_min_freq to match cpufreq base_frequency.\n"); + exit(0); + + } + fprintf(stderr, + "\tOptional Arguments: -a|--auto : Use priority of cores to set core-power associations\n"); + } else { + + if (is_clx_n_platform()) { + fprintf(stderr, + "\tOn this platform this command doesn't disable feature in the hardware.\n"); + fprintf(stderr, + "\tIt updates the cpufreq scaling_min_freq to match cpuinfo_min_freq\n"); + exit(0); + } + fprintf(stderr, + "Disable Intel Speed Select Technology base frequency feature\n"); + fprintf(stderr, + "\tOptional Arguments: -a|--auto : Also disable core-power associations\n"); + } + exit(0); + } + + isst_ctdp_display_information_start(outf); + if (max_target_cpus) + for_each_online_target_cpu_in_set(set_pbf_for_cpu, NULL, NULL, + NULL, &enable); + else + for_each_online_package_in_set(set_pbf_for_cpu, NULL, NULL, + NULL, &enable); + isst_ctdp_display_information_end(outf); +} + +static void dump_fact_config_for_cpu(int cpu, void *arg1, void *arg2, + void *arg3, void *arg4) +{ + struct isst_fact_info fact_info; + int ret; + + ret = isst_get_fact_info(cpu, tdp_level, fact_bucket, &fact_info); + if (ret) { + isst_display_error_info_message(1, "Failed to get turbo-freq info at this level", 1, tdp_level); + isst_ctdp_display_information_end(outf); + exit(1); + } else { + isst_fact_display_information(cpu, outf, tdp_level, fact_bucket, + fact_avx, &fact_info); + } +} + +static void dump_fact_config(int arg) +{ + if (cmd_help) { + fprintf(stderr, + "Print complete Intel Speed Select Technology turbo frequency configuration for a TDP level. Other arguments are optional.\n"); + fprintf(stderr, + "\tArguments: -l|--level : Specify tdp level\n"); + fprintf(stderr, + "\tArguments: -b|--bucket : Bucket index to dump\n"); + fprintf(stderr, + "\tArguments: -r|--trl-type : Specify trl type: sse|avx2|avx512\n"); + exit(0); + } + + if (tdp_level == 0xff) { + isst_display_error_info_message(1, "Invalid command: specify tdp_level\n", 0, 0); + exit(1); + } + + isst_ctdp_display_information_start(outf); + if (max_target_cpus) + for_each_online_target_cpu_in_set(dump_fact_config_for_cpu, + NULL, NULL, NULL, NULL); + else + for_each_online_package_in_set(dump_fact_config_for_cpu, NULL, + NULL, NULL, NULL); + isst_ctdp_display_information_end(outf); +} + +static void set_fact_for_cpu(int cpu, void *arg1, void *arg2, void *arg3, + void *arg4) +{ + struct isst_pkg_ctdp_level_info ctdp_level; + struct isst_pkg_ctdp pkg_dev; + int ret; + int status = *(int *)arg4; + + ret = isst_get_ctdp_levels(cpu, &pkg_dev); + if (ret) { + isst_display_error_info_message(1, "Failed to get number of levels", 0, 0); + goto disp_results; + } + + ret = isst_get_ctdp_control(cpu, pkg_dev.current_level, &ctdp_level); + if (ret) { + isst_display_error_info_message(1, "Failed to get current level", 0, 0); + goto disp_results; + } + + if (!ctdp_level.fact_support) { + isst_display_error_info_message(1, "turbo-freq feature is not present at this level", 1, pkg_dev.current_level); + ret = -1; + goto disp_results; + } + + if (status) { + ret = isst_pm_qos_config(cpu, 1, 1); + if (ret) + goto disp_results; + } + + ret = isst_set_pbf_fact_status(cpu, 0, status); + if (ret) { + debug_printf("isst_set_pbf_fact_status failed"); + if (auto_mode) + isst_pm_qos_config(cpu, 0, 0); + + goto disp_results; + } + + /* Set TRL */ + if (status) { + struct isst_pkg_ctdp pkg_dev; + + ret = isst_get_ctdp_levels(cpu, &pkg_dev); + if (!ret) + ret = isst_set_trl(cpu, fact_trl); + if (ret && auto_mode) + isst_pm_qos_config(cpu, 0, 0); + } else { + if (auto_mode) + isst_pm_qos_config(cpu, 0, 0); + } + +disp_results: + if (status) { + isst_display_result(cpu, outf, "turbo-freq", "enable", ret); + if (ret) + fact_enable_fail = ret; + } else { + /* Since we modified TRL during Fact enable, restore it */ + isst_set_trl_from_current_tdp(cpu, fact_trl); + isst_display_result(cpu, outf, "turbo-freq", "disable", ret); + } +} + +static void set_fact_enable(int arg) +{ + int i, ret, enable = arg; + + if (cmd_help) { + if (enable) { + fprintf(stderr, + "Enable Intel Speed Select Technology Turbo frequency feature\n"); + fprintf(stderr, + "Optional: -t|--trl : Specify turbo ratio limit\n"); + fprintf(stderr, + "\tOptional Arguments: -a|--auto : Designate specified target CPUs with"); + fprintf(stderr, + "-C|--cpu option as as high priority using core-power feature\n"); + } else { + fprintf(stderr, + "Disable Intel Speed Select Technology turbo frequency feature\n"); + fprintf(stderr, + "Optional: -t|--trl : Specify turbo ratio limit\n"); + fprintf(stderr, + "\tOptional Arguments: -a|--auto : Also disable core-power associations\n"); + } + exit(0); + } + + isst_ctdp_display_information_start(outf); + if (max_target_cpus) + for_each_online_target_cpu_in_set(set_fact_for_cpu, NULL, NULL, + NULL, &enable); + else + for_each_online_package_in_set(set_fact_for_cpu, NULL, NULL, + NULL, &enable); + isst_ctdp_display_information_end(outf); + + if (!fact_enable_fail && enable && auto_mode) { + /* + * When we adjust CLOS param, we have to set for siblings also. + * So for the each user specified CPU, also add the sibling + * in the present_cpu_mask. + */ + for (i = 0; i < get_topo_max_cpus(); ++i) { + char buffer[128], sibling_list[128], *cpu_str; + int fd, len; + + if (!CPU_ISSET_S(i, target_cpumask_size, target_cpumask)) + continue; + + snprintf(buffer, sizeof(buffer), + "/sys/devices/system/cpu/cpu%d/topology/thread_siblings_list", i); + + fd = open(buffer, O_RDONLY); + if (fd < 0) + continue; + + len = read(fd, sibling_list, sizeof(sibling_list)); + close(fd); + + if (len < 0) + continue; + + cpu_str = strtok(sibling_list, ","); + while (cpu_str != NULL) { + int cpu; + + sscanf(cpu_str, "%d", &cpu); + CPU_SET_S(cpu, target_cpumask_size, target_cpumask); + cpu_str = strtok(NULL, ","); + } + } + + for (i = 0; i < get_topo_max_cpus(); ++i) { + int clos; + + if (!CPU_ISSET_S(i, present_cpumask_size, present_cpumask)) + continue; + + ret = set_clos_param(i, 0, 0, 0, 0, 0xff); + if (ret) + goto error_disp; + + ret = set_clos_param(i, 1, 15, 15, 0, 0xff); + if (ret) + goto error_disp; + + ret = set_clos_param(i, 2, 15, 15, 0, 0xff); + if (ret) + goto error_disp; + + ret = set_clos_param(i, 3, 15, 15, 0, 0xff); + if (ret) + goto error_disp; + + if (CPU_ISSET_S(i, target_cpumask_size, target_cpumask)) + clos = 0; + else + clos = 3; + + debug_printf("Associate cpu: %d clos: %d\n", i, clos); + ret = isst_clos_associate(i, clos); + if (ret) + goto error_disp; + } + isst_display_result(-1, outf, "turbo-freq --auto", "enable", 0); + } + + return; + +error_disp: + isst_display_result(i, outf, "turbo-freq --auto", "enable", ret); + +} + +static void enable_clos_qos_config(int cpu, void *arg1, void *arg2, void *arg3, + void *arg4) +{ + int ret; + int status = *(int *)arg4; + + if (is_skx_based_platform()) + clos_priority_type = 1; + + ret = isst_pm_qos_config(cpu, status, clos_priority_type); + if (ret) + isst_display_error_info_message(1, "isst_pm_qos_config failed", 0, 0); + + if (status) + isst_display_result(cpu, outf, "core-power", "enable", + ret); + else + isst_display_result(cpu, outf, "core-power", "disable", + ret); +} + +static void set_clos_enable(int arg) +{ + int enable = arg; + + if (cmd_help) { + if (enable) { + fprintf(stderr, + "Enable core-power for a package/die\n"); + if (!is_skx_based_platform()) { + fprintf(stderr, + "\tClos Enable: Specify priority type with [--priority|-p]\n"); + fprintf(stderr, "\t\t 0: Proportional, 1: Ordered\n"); + } + } else { + fprintf(stderr, + "Disable core-power: [No command arguments are required]\n"); + } + exit(0); + } + + if (enable && cpufreq_sysfs_present()) { + fprintf(stderr, + "cpufreq subsystem and core-power enable will interfere with each other!\n"); + } + + isst_ctdp_display_information_start(outf); + if (max_target_cpus) + for_each_online_target_cpu_in_set(enable_clos_qos_config, NULL, + NULL, NULL, &enable); + else + for_each_online_package_in_set(enable_clos_qos_config, NULL, + NULL, NULL, &enable); + isst_ctdp_display_information_end(outf); +} + +static void dump_clos_config_for_cpu(int cpu, void *arg1, void *arg2, + void *arg3, void *arg4) +{ + struct isst_clos_config clos_config; + int ret; + + ret = isst_pm_get_clos(cpu, current_clos, &clos_config); + if (ret) + isst_display_error_info_message(1, "isst_pm_get_clos failed", 0, 0); + else + isst_clos_display_information(cpu, outf, current_clos, + &clos_config); +} + +static void dump_clos_config(int arg) +{ + if (cmd_help) { + fprintf(stderr, + "Print Intel Speed Select Technology core power configuration\n"); + fprintf(stderr, + "\tArguments: [-c | --clos]: Specify clos id\n"); + exit(0); + } + if (current_clos < 0 || current_clos > 3) { + isst_display_error_info_message(1, "Invalid clos id\n", 0, 0); + isst_ctdp_display_information_end(outf); + exit(0); + } + + isst_ctdp_display_information_start(outf); + if (max_target_cpus) + for_each_online_target_cpu_in_set(dump_clos_config_for_cpu, + NULL, NULL, NULL, NULL); + else + for_each_online_package_in_set(dump_clos_config_for_cpu, NULL, + NULL, NULL, NULL); + isst_ctdp_display_information_end(outf); +} + +static void get_clos_info_for_cpu(int cpu, void *arg1, void *arg2, void *arg3, + void *arg4) +{ + int enable, ret, prio_type; + + ret = isst_clos_get_clos_information(cpu, &enable, &prio_type); + if (ret) + isst_display_error_info_message(1, "isst_clos_get_info failed", 0, 0); + else { + int cp_state, cp_cap; + + isst_read_pm_config(cpu, &cp_state, &cp_cap); + isst_clos_display_clos_information(cpu, outf, enable, prio_type, + cp_state, cp_cap); + } +} + +static void dump_clos_info(int arg) +{ + if (cmd_help) { + fprintf(stderr, + "Print Intel Speed Select Technology core power information\n"); + fprintf(stderr, "\t Optionally specify targeted cpu id with [--cpu|-c]\n"); + exit(0); + } + + isst_ctdp_display_information_start(outf); + if (max_target_cpus) + for_each_online_target_cpu_in_set(get_clos_info_for_cpu, NULL, + NULL, NULL, NULL); + else + for_each_online_package_in_set(get_clos_info_for_cpu, NULL, + NULL, NULL, NULL); + isst_ctdp_display_information_end(outf); + +} + +static void set_clos_config_for_cpu(int cpu, void *arg1, void *arg2, void *arg3, + void *arg4) +{ + struct isst_clos_config clos_config; + int ret; + + clos_config.pkg_id = get_physical_package_id(cpu); + clos_config.die_id = get_physical_die_id(cpu); + + clos_config.epp = clos_epp; + clos_config.clos_prop_prio = clos_prop_prio; + clos_config.clos_min = clos_min; + clos_config.clos_max = clos_max; + clos_config.clos_desired = clos_desired; + ret = isst_set_clos(cpu, current_clos, &clos_config); + if (ret) + isst_display_error_info_message(1, "isst_set_clos failed", 0, 0); + else + isst_display_result(cpu, outf, "core-power", "config", ret); +} + +static void set_clos_config(int arg) +{ + if (cmd_help) { + fprintf(stderr, + "Set core-power configuration for one of the four clos ids\n"); + fprintf(stderr, + "\tSpecify targeted clos id with [--clos|-c]\n"); + if (!is_skx_based_platform()) { + fprintf(stderr, "\tSpecify clos EPP with [--epp|-e]\n"); + fprintf(stderr, + "\tSpecify clos Proportional Priority [--weight|-w]\n"); + } + fprintf(stderr, "\tSpecify clos min in MHz with [--min|-n]\n"); + fprintf(stderr, "\tSpecify clos max in MHz with [--max|-m]\n"); + exit(0); + } + + if (current_clos < 0 || current_clos > 3) { + isst_display_error_info_message(1, "Invalid clos id\n", 0, 0); + exit(0); + } + if (!is_skx_based_platform() && (clos_epp < 0 || clos_epp > 0x0F)) { + fprintf(stderr, "clos epp is not specified or invalid, default: 0\n"); + clos_epp = 0; + } + if (!is_skx_based_platform() && (clos_prop_prio < 0 || clos_prop_prio > 0x0F)) { + fprintf(stderr, + "clos frequency weight is not specified or invalid, default: 0\n"); + clos_prop_prio = 0; + } + if (clos_min < 0) { + fprintf(stderr, "clos min is not specified, default: 0\n"); + clos_min = 0; + } + if (clos_max < 0) { + fprintf(stderr, "clos max is not specified, default: Max frequency (ratio 0xff)\n"); + clos_max = 0xff; + } + if (clos_desired) { + fprintf(stderr, "clos desired is not supported on this platform\n"); + clos_desired = 0x00; + } + + isst_ctdp_display_information_start(outf); + if (max_target_cpus) + for_each_online_target_cpu_in_set(set_clos_config_for_cpu, NULL, + NULL, NULL, NULL); + else + for_each_online_package_in_set(set_clos_config_for_cpu, NULL, + NULL, NULL, NULL); + isst_ctdp_display_information_end(outf); +} + +static void set_clos_assoc_for_cpu(int cpu, void *arg1, void *arg2, void *arg3, + void *arg4) +{ + int ret; + + ret = isst_clos_associate(cpu, current_clos); + if (ret) + debug_printf("isst_clos_associate failed"); + else + isst_display_result(cpu, outf, "core-power", "assoc", ret); +} + +static void set_clos_assoc(int arg) +{ + if (cmd_help) { + fprintf(stderr, "Associate a clos id to a CPU\n"); + fprintf(stderr, + "\tSpecify targeted clos id with [--clos|-c]\n"); + fprintf(stderr, + "\tFor example to associate clos 1 to CPU 0: issue\n"); + fprintf(stderr, + "\tintel-speed-select --cpu 0 core-power assoc --clos 1\n"); + exit(0); + } + + if (current_clos < 0 || current_clos > 3) { + isst_display_error_info_message(1, "Invalid clos id\n", 0, 0); + exit(0); + } + if (max_target_cpus) + for_each_online_target_cpu_in_set(set_clos_assoc_for_cpu, NULL, + NULL, NULL, NULL); + else { + isst_display_error_info_message(1, "Invalid target cpu. Specify with [-c|--cpu]", 0, 0); + } +} + +static void get_clos_assoc_for_cpu(int cpu, void *arg1, void *arg2, void *arg3, + void *arg4) +{ + int clos, ret; + + ret = isst_clos_get_assoc_status(cpu, &clos); + if (ret) + isst_display_error_info_message(1, "isst_clos_get_assoc_status failed", 0, 0); + else + isst_clos_display_assoc_information(cpu, outf, clos); +} + +static void get_clos_assoc(int arg) +{ + if (cmd_help) { + fprintf(stderr, "Get associate clos id to a CPU\n"); + fprintf(stderr, "\tSpecify targeted cpu id with [--cpu|-c]\n"); + exit(0); + } + + if (!max_target_cpus) { + isst_display_error_info_message(1, "Invalid target cpu. Specify with [-c|--cpu]", 0, 0); + exit(0); + } + + isst_ctdp_display_information_start(outf); + for_each_online_target_cpu_in_set(get_clos_assoc_for_cpu, NULL, + NULL, NULL, NULL); + isst_ctdp_display_information_end(outf); +} + +static struct process_cmd_struct clx_n_cmds[] = { + { "perf-profile", "info", dump_isst_config, 0 }, + { "base-freq", "info", dump_pbf_config, 0 }, + { "base-freq", "enable", set_pbf_enable, 1 }, + { "base-freq", "disable", set_pbf_enable, 0 }, + { NULL, NULL, NULL, 0 } +}; + +static struct process_cmd_struct isst_cmds[] = { + { "perf-profile", "get-lock-status", get_tdp_locked, 0 }, + { "perf-profile", "get-config-levels", get_tdp_levels, 0 }, + { "perf-profile", "get-config-version", get_tdp_version, 0 }, + { "perf-profile", "get-config-enabled", get_tdp_enabled, 0 }, + { "perf-profile", "get-config-current-level", get_tdp_current_level, + 0 }, + { "perf-profile", "set-config-level", set_tdp_level, 0 }, + { "perf-profile", "info", dump_isst_config, 0 }, + { "base-freq", "info", dump_pbf_config, 0 }, + { "base-freq", "enable", set_pbf_enable, 1 }, + { "base-freq", "disable", set_pbf_enable, 0 }, + { "turbo-freq", "info", dump_fact_config, 0 }, + { "turbo-freq", "enable", set_fact_enable, 1 }, + { "turbo-freq", "disable", set_fact_enable, 0 }, + { "core-power", "info", dump_clos_info, 0 }, + { "core-power", "enable", set_clos_enable, 1 }, + { "core-power", "disable", set_clos_enable, 0 }, + { "core-power", "config", set_clos_config, 0 }, + { "core-power", "get-config", dump_clos_config, 0 }, + { "core-power", "assoc", set_clos_assoc, 0 }, + { "core-power", "get-assoc", get_clos_assoc, 0 }, + { NULL, NULL, NULL } +}; + +/* + * parse cpuset with following syntax + * 1,2,4..6,8-10 and set bits in cpu_subset + */ +void parse_cpu_command(char *optarg) +{ + unsigned int start, end; + char *next; + + next = optarg; + + while (next && *next) { + if (*next == '-') /* no negative cpu numbers */ + goto error; + + start = strtoul(next, &next, 10); + + if (max_target_cpus < MAX_CPUS_IN_ONE_REQ) + target_cpus[max_target_cpus++] = start; + + if (*next == '\0') + break; + + if (*next == ',') { + next += 1; + continue; + } + + if (*next == '-') { + next += 1; /* start range */ + } else if (*next == '.') { + next += 1; + if (*next == '.') + next += 1; /* start range */ + else + goto error; + } + + end = strtoul(next, &next, 10); + if (end <= start) + goto error; + + while (++start <= end) { + if (max_target_cpus < MAX_CPUS_IN_ONE_REQ) + target_cpus[max_target_cpus++] = start; + } + + if (*next == ',') + next += 1; + else if (*next != '\0') + goto error; + } + +#ifdef DEBUG + { + int i; + + for (i = 0; i < max_target_cpus; ++i) + printf("cpu [%d] in arg\n", target_cpus[i]); + } +#endif + return; + +error: + fprintf(stderr, "\"--cpu %s\" malformed\n", optarg); + exit(-1); +} + +static void parse_cmd_args(int argc, int start, char **argv) +{ + int opt; + int option_index; + + static struct option long_options[] = { + { "bucket", required_argument, 0, 'b' }, + { "level", required_argument, 0, 'l' }, + { "online", required_argument, 0, 'o' }, + { "trl-type", required_argument, 0, 'r' }, + { "trl", required_argument, 0, 't' }, + { "help", no_argument, 0, 'h' }, + { "clos", required_argument, 0, 'c' }, + { "desired", required_argument, 0, 'd' }, + { "epp", required_argument, 0, 'e' }, + { "min", required_argument, 0, 'n' }, + { "max", required_argument, 0, 'm' }, + { "priority", required_argument, 0, 'p' }, + { "weight", required_argument, 0, 'w' }, + { "auto", no_argument, 0, 'a' }, + { 0, 0, 0, 0 } + }; + + option_index = start; + + optind = start + 1; + while ((opt = getopt_long(argc, argv, "b:l:t:c:d:e:n:m:p:w:r:hoa", + long_options, &option_index)) != -1) { + switch (opt) { + case 'a': + auto_mode = 1; + break; + case 'b': + fact_bucket = atoi(optarg); + break; + case 'h': + cmd_help = 1; + break; + case 'l': + tdp_level = atoi(optarg); + break; + case 'o': + force_online_offline = 1; + break; + case 't': + sscanf(optarg, "0x%llx", &fact_trl); + break; + case 'r': + if (!strncmp(optarg, "sse", 3)) { + fact_avx = 0x01; + } else if (!strncmp(optarg, "avx2", 4)) { + fact_avx = 0x02; + } else if (!strncmp(optarg, "avx512", 6)) { + fact_avx = 0x04; + } else { + fprintf(outf, "Invalid sse,avx options\n"); + exit(1); + } + break; + /* CLOS related */ + case 'c': + current_clos = atoi(optarg); + break; + case 'd': + clos_desired = atoi(optarg); + clos_desired /= DISP_FREQ_MULTIPLIER; + break; + case 'e': + clos_epp = atoi(optarg); + if (is_skx_based_platform()) { + isst_display_error_info_message(1, "epp can't be specified on this platform", 0, 0); + exit(0); + } + break; + case 'n': + clos_min = atoi(optarg); + clos_min /= DISP_FREQ_MULTIPLIER; + break; + case 'm': + clos_max = atoi(optarg); + clos_max /= DISP_FREQ_MULTIPLIER; + break; + case 'p': + clos_priority_type = atoi(optarg); + if (is_skx_based_platform() && !clos_priority_type) { + isst_display_error_info_message(1, "Invalid clos priority type: proportional for this platform", 0, 0); + exit(0); + } + break; + case 'w': + clos_prop_prio = atoi(optarg); + if (is_skx_based_platform()) { + isst_display_error_info_message(1, "weight can't be specified on this platform", 0, 0); + exit(0); + } + break; + default: + printf("Unknown option: ignore\n"); + } + } + + if (argv[optind]) + printf("Garbage at the end of command: ignore\n"); +} + +static void isst_help(void) +{ + printf("perf-profile:\tAn architectural mechanism that allows multiple optimized \n\ + performance profiles per system via static and/or dynamic\n\ + adjustment of core count, workload, Tjmax, and\n\ + TDP, etc.\n"); + printf("\nCommands : For feature=perf-profile\n"); + printf("\tinfo\n"); + + if (!is_clx_n_platform()) { + printf("\tget-lock-status\n"); + printf("\tget-config-levels\n"); + printf("\tget-config-version\n"); + printf("\tget-config-enabled\n"); + printf("\tget-config-current-level\n"); + printf("\tset-config-level\n"); + } +} + +static void pbf_help(void) +{ + printf("base-freq:\tEnables users to increase guaranteed base frequency\n\ + on certain cores (high priority cores) in exchange for lower\n\ + base frequency on remaining cores (low priority cores).\n"); + printf("\tcommand : info\n"); + printf("\tcommand : enable\n"); + printf("\tcommand : disable\n"); +} + +static void fact_help(void) +{ + printf("turbo-freq:\tEnables the ability to set different turbo ratio\n\ + limits to cores based on priority.\n"); + printf("\nCommand: For feature=turbo-freq\n"); + printf("\tcommand : info\n"); + printf("\tcommand : enable\n"); + printf("\tcommand : disable\n"); +} + +static void core_power_help(void) +{ + printf("core-power:\tInterface that allows user to define per core/tile\n\ + priority.\n"); + printf("\nCommands : For feature=core-power\n"); + printf("\tinfo\n"); + printf("\tenable\n"); + printf("\tdisable\n"); + printf("\tconfig\n"); + printf("\tget-config\n"); + printf("\tassoc\n"); + printf("\tget-assoc\n"); +} + +struct process_cmd_help_struct { + char *feature; + void (*process_fn)(void); +}; + +static struct process_cmd_help_struct isst_help_cmds[] = { + { "perf-profile", isst_help }, + { "base-freq", pbf_help }, + { "turbo-freq", fact_help }, + { "core-power", core_power_help }, + { NULL, NULL } +}; + +static struct process_cmd_help_struct clx_n_help_cmds[] = { + { "perf-profile", isst_help }, + { "base-freq", pbf_help }, + { NULL, NULL } +}; + +void process_command(int argc, char **argv, + struct process_cmd_help_struct *help_cmds, + struct process_cmd_struct *cmds) +{ + int i = 0, matched = 0; + char *feature = argv[optind]; + char *cmd = argv[optind + 1]; + + if (!feature || !cmd) + return; + + debug_printf("feature name [%s] command [%s]\n", feature, cmd); + if (!strcmp(cmd, "-h") || !strcmp(cmd, "--help")) { + while (help_cmds[i].feature) { + if (!strcmp(help_cmds[i].feature, feature)) { + help_cmds[i].process_fn(); + exit(0); + } + ++i; + } + } + + if (!is_clx_n_platform()) + create_cpu_map(); + + i = 0; + while (cmds[i].feature) { + if (!strcmp(cmds[i].feature, feature) && + !strcmp(cmds[i].command, cmd)) { + parse_cmd_args(argc, optind + 1, argv); + cmds[i].process_fn(cmds[i].arg); + matched = 1; + break; + } + ++i; + } + + if (!matched) + fprintf(stderr, "Invalid command\n"); +} + +static void usage(void) +{ + if (is_clx_n_platform()) { + fprintf(stderr, "\nThere is limited support of Intel Speed Select features on this platform.\n"); + fprintf(stderr, "Everything is pre-configured using BIOS options, this tool can't enable any feature in the hardware.\n\n"); + } + + printf("\nUsage:\n"); + printf("intel-speed-select [OPTIONS] FEATURE COMMAND COMMAND_ARGUMENTS\n"); + printf("\nUse this tool to enumerate and control the Intel Speed Select Technology features:\n"); + if (is_clx_n_platform()) + printf("\nFEATURE : [perf-profile|base-freq]\n"); + else + printf("\nFEATURE : [perf-profile|base-freq|turbo-freq|core-power]\n"); + printf("\nFor help on each feature, use -h|--help\n"); + printf("\tFor example: intel-speed-select perf-profile -h\n"); + + printf("\nFor additional help on each command for a feature, use --h|--help\n"); + printf("\tFor example: intel-speed-select perf-profile get-lock-status -h\n"); + printf("\t\t This will print help for the command \"get-lock-status\" for the feature \"perf-profile\"\n"); + + printf("\nOPTIONS\n"); + printf("\t[-c|--cpu] : logical cpu number\n"); + printf("\t\tDefault: Die scoped for all dies in the system with multiple dies/package\n"); + printf("\t\t\t Or Package scoped for all Packages when each package contains one die\n"); + printf("\t[-d|--debug] : Debug mode\n"); + printf("\t[-f|--format] : output format [json|text]. Default: text\n"); + printf("\t[-h|--help] : Print help\n"); + printf("\t[-i|--info] : Print platform information\n"); + printf("\t[-o|--out] : Output file\n"); + printf("\t\t\tDefault : stderr\n"); + printf("\t[-p|--pause] : Delay between two mail box commands in milliseconds\n"); + printf("\t[-r|--retry] : Retry count for mail box commands on failure, default 3\n"); + printf("\t[-v|--version] : Print version\n"); + + printf("\nResult format\n"); + printf("\tResult display uses a common format for each command:\n"); + printf("\tResults are formatted in text/JSON with\n"); + printf("\t\tPackage, Die, CPU, and command specific results.\n"); + + printf("\nExamples\n"); + printf("\tTo get platform information:\n"); + printf("\t\tintel-speed-select --info\n"); + printf("\tTo get full perf-profile information dump:\n"); + printf("\t\tintel-speed-select perf-profile info\n"); + printf("\tTo get full base-freq information dump:\n"); + printf("\t\tintel-speed-select base-freq info -l 0\n"); + if (!is_clx_n_platform()) { + printf("\tTo get full turbo-freq information dump:\n"); + printf("\t\tintel-speed-select turbo-freq info -l 0\n"); + } + exit(1); +} + +static void print_version(void) +{ + fprintf(outf, "Version %s\n", version_str); + fprintf(outf, "Build date %s time %s\n", __DATE__, __TIME__); + exit(0); +} + +static void cmdline(int argc, char **argv) +{ + const char *pathname = "/dev/isst_interface"; + char *ptr; + FILE *fp; + int opt; + int option_index = 0; + int ret; + + static struct option long_options[] = { + { "cpu", required_argument, 0, 'c' }, + { "debug", no_argument, 0, 'd' }, + { "format", required_argument, 0, 'f' }, + { "help", no_argument, 0, 'h' }, + { "info", no_argument, 0, 'i' }, + { "pause", required_argument, 0, 'p' }, + { "out", required_argument, 0, 'o' }, + { "retry", required_argument, 0, 'r' }, + { "version", no_argument, 0, 'v' }, + { 0, 0, 0, 0 } + }; + + if (geteuid() != 0) { + fprintf(stderr, "Must run as root\n"); + exit(0); + } + + ret = update_cpu_model(); + if (ret) + err(-1, "Invalid CPU model (%d)\n", cpu_model); + printf("Intel(R) Speed Select Technology\n"); + printf("Executing on CPU model:%d[0x%x]\n", cpu_model, cpu_model); + + if (!is_clx_n_platform()) { + fp = fopen(pathname, "rb"); + if (!fp) { + fprintf(stderr, "Intel speed select drivers are not loaded on this system.\n"); + fprintf(stderr, "Verify that kernel config includes CONFIG_INTEL_SPEED_SELECT_INTERFACE.\n"); + fprintf(stderr, "If the config is included then this is not a supported platform.\n"); + exit(0); + } + fclose(fp); + } + + progname = argv[0]; + while ((opt = getopt_long_only(argc, argv, "+c:df:hio:v", long_options, + &option_index)) != -1) { + switch (opt) { + case 'c': + parse_cpu_command(optarg); + break; + case 'd': + debug_flag = 1; + printf("Debug Mode ON\n"); + break; + case 'f': + if (!strncmp(optarg, "json", 4)) + out_format_json = 1; + break; + case 'h': + usage(); + break; + case 'i': + isst_print_platform_information(); + break; + case 'o': + if (outf) + fclose(outf); + outf = fopen_or_exit(optarg, "w"); + break; + case 'p': + ret = strtol(optarg, &ptr, 10); + if (!ret) + fprintf(stderr, "Invalid pause interval, ignore\n"); + else + mbox_delay = ret; + break; + case 'r': + ret = strtol(optarg, &ptr, 10); + if (!ret) + fprintf(stderr, "Invalid retry count, ignore\n"); + else + mbox_retries = ret; + break; + case 'v': + print_version(); + break; + default: + usage(); + } + } + + if (optind > (argc - 2)) { + usage(); + exit(0); + } + set_max_cpu_num(); + store_cpu_topology(); + set_cpu_present_cpu_mask(); + set_cpu_target_cpu_mask(); + + if (!is_clx_n_platform()) { + ret = isst_fill_platform_info(); + if (ret) + goto out; + process_command(argc, argv, isst_help_cmds, isst_cmds); + } else { + process_command(argc, argv, clx_n_help_cmds, clx_n_cmds); + } +out: + free_cpu_set(present_cpumask); + free_cpu_set(target_cpumask); +} + +int main(int argc, char **argv) +{ + outf = stderr; + cmdline(argc, argv); + return 0; +} diff --git a/tools/power/x86/intel-speed-select/isst-core.c b/tools/power/x86/intel-speed-select/isst-core.c new file mode 100644 index 000000000..1d7ecb543 --- /dev/null +++ b/tools/power/x86/intel-speed-select/isst-core.c @@ -0,0 +1,1048 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Intel Speed Select -- Enumerate and control features + * Copyright (c) 2019 Intel Corporation. + */ + +#include "isst.h" + +int isst_write_pm_config(int cpu, int cp_state) +{ + unsigned int req, resp; + int ret; + + if (cp_state) + req = BIT(16); + else + req = 0; + + ret = isst_send_mbox_command(cpu, WRITE_PM_CONFIG, PM_FEATURE, 0, req, + &resp); + if (ret) + return ret; + + debug_printf("cpu:%d WRITE_PM_CONFIG resp:%x\n", cpu, resp); + + return 0; +} + +int isst_read_pm_config(int cpu, int *cp_state, int *cp_cap) +{ + unsigned int resp; + int ret; + + ret = isst_send_mbox_command(cpu, READ_PM_CONFIG, PM_FEATURE, 0, 0, + &resp); + if (ret) + return ret; + + debug_printf("cpu:%d READ_PM_CONFIG resp:%x\n", cpu, resp); + + *cp_state = resp & BIT(16); + *cp_cap = resp & BIT(0) ? 1 : 0; + + return 0; +} + +int isst_get_ctdp_levels(int cpu, struct isst_pkg_ctdp *pkg_dev) +{ + unsigned int resp; + int ret; + + ret = isst_send_mbox_command(cpu, CONFIG_TDP, + CONFIG_TDP_GET_LEVELS_INFO, 0, 0, &resp); + if (ret) { + pkg_dev->levels = 0; + pkg_dev->locked = 1; + pkg_dev->current_level = 0; + pkg_dev->version = 0; + pkg_dev->enabled = 0; + return 0; + } + + debug_printf("cpu:%d CONFIG_TDP_GET_LEVELS_INFO resp:%x\n", cpu, resp); + + pkg_dev->version = resp & 0xff; + pkg_dev->levels = (resp >> 8) & 0xff; + pkg_dev->current_level = (resp >> 16) & 0xff; + pkg_dev->locked = !!(resp & BIT(24)); + pkg_dev->enabled = !!(resp & BIT(31)); + + return 0; +} + +int isst_get_ctdp_control(int cpu, int config_index, + struct isst_pkg_ctdp_level_info *ctdp_level) +{ + int cp_state, cp_cap; + unsigned int resp; + int ret; + + ret = isst_send_mbox_command(cpu, CONFIG_TDP, + CONFIG_TDP_GET_TDP_CONTROL, 0, + config_index, &resp); + if (ret) + return ret; + + ctdp_level->fact_support = resp & BIT(0); + ctdp_level->pbf_support = !!(resp & BIT(1)); + ctdp_level->fact_enabled = !!(resp & BIT(16)); + ctdp_level->pbf_enabled = !!(resp & BIT(17)); + + ret = isst_read_pm_config(cpu, &cp_state, &cp_cap); + if (ret) { + debug_printf("cpu:%d pm_config is not supported \n", cpu); + } else { + debug_printf("cpu:%d pm_config SST-CP state:%d cap:%d \n", cpu, cp_state, cp_cap); + ctdp_level->sst_cp_support = cp_cap; + ctdp_level->sst_cp_enabled = cp_state; + } + + debug_printf( + "cpu:%d CONFIG_TDP_GET_TDP_CONTROL resp:%x fact_support:%d pbf_support: %d fact_enabled:%d pbf_enabled:%d\n", + cpu, resp, ctdp_level->fact_support, ctdp_level->pbf_support, + ctdp_level->fact_enabled, ctdp_level->pbf_enabled); + + return 0; +} + +int isst_get_tdp_info(int cpu, int config_index, + struct isst_pkg_ctdp_level_info *ctdp_level) +{ + unsigned int resp; + int ret; + + ret = isst_send_mbox_command(cpu, CONFIG_TDP, CONFIG_TDP_GET_TDP_INFO, + 0, config_index, &resp); + if (ret) { + isst_display_error_info_message(1, "Invalid level, Can't get TDP information at level", 1, config_index); + return ret; + } + + ctdp_level->pkg_tdp = resp & GENMASK(14, 0); + ctdp_level->tdp_ratio = (resp & GENMASK(23, 16)) >> 16; + + debug_printf( + "cpu:%d ctdp:%d CONFIG_TDP_GET_TDP_INFO resp:%x tdp_ratio:%d pkg_tdp:%d\n", + cpu, config_index, resp, ctdp_level->tdp_ratio, + ctdp_level->pkg_tdp); + return 0; +} + +int isst_get_pwr_info(int cpu, int config_index, + struct isst_pkg_ctdp_level_info *ctdp_level) +{ + unsigned int resp; + int ret; + + ret = isst_send_mbox_command(cpu, CONFIG_TDP, CONFIG_TDP_GET_PWR_INFO, + 0, config_index, &resp); + if (ret) + return ret; + + ctdp_level->pkg_max_power = resp & GENMASK(14, 0); + ctdp_level->pkg_min_power = (resp & GENMASK(30, 16)) >> 16; + + debug_printf( + "cpu:%d ctdp:%d CONFIG_TDP_GET_PWR_INFO resp:%x pkg_max_power:%d pkg_min_power:%d\n", + cpu, config_index, resp, ctdp_level->pkg_max_power, + ctdp_level->pkg_min_power); + + return 0; +} + +void isst_get_uncore_p0_p1_info(int cpu, int config_index, + struct isst_pkg_ctdp_level_info *ctdp_level) +{ + unsigned int resp; + int ret; + ret = isst_send_mbox_command(cpu, CONFIG_TDP, + CONFIG_TDP_GET_UNCORE_P0_P1_INFO, 0, + config_index, &resp); + if (ret) { + ctdp_level->uncore_p0 = 0; + ctdp_level->uncore_p1 = 0; + return; + } + + ctdp_level->uncore_p0 = resp & GENMASK(7, 0); + ctdp_level->uncore_p1 = (resp & GENMASK(15, 8)) >> 8; + debug_printf( + "cpu:%d ctdp:%d CONFIG_TDP_GET_UNCORE_P0_P1_INFO resp:%x uncore p0:%d uncore p1:%d\n", + cpu, config_index, resp, ctdp_level->uncore_p0, + ctdp_level->uncore_p1); +} + +void isst_get_p1_info(int cpu, int config_index, + struct isst_pkg_ctdp_level_info *ctdp_level) +{ + unsigned int resp; + int ret; + ret = isst_send_mbox_command(cpu, CONFIG_TDP, CONFIG_TDP_GET_P1_INFO, 0, + config_index, &resp); + if (ret) { + ctdp_level->sse_p1 = 0; + ctdp_level->avx2_p1 = 0; + ctdp_level->avx512_p1 = 0; + return; + } + + ctdp_level->sse_p1 = resp & GENMASK(7, 0); + ctdp_level->avx2_p1 = (resp & GENMASK(15, 8)) >> 8; + ctdp_level->avx512_p1 = (resp & GENMASK(23, 16)) >> 16; + debug_printf( + "cpu:%d ctdp:%d CONFIG_TDP_GET_P1_INFO resp:%x sse_p1:%d avx2_p1:%d avx512_p1:%d\n", + cpu, config_index, resp, ctdp_level->sse_p1, + ctdp_level->avx2_p1, ctdp_level->avx512_p1); +} + +void isst_get_uncore_mem_freq(int cpu, int config_index, + struct isst_pkg_ctdp_level_info *ctdp_level) +{ + unsigned int resp; + int ret; + ret = isst_send_mbox_command(cpu, CONFIG_TDP, CONFIG_TDP_GET_MEM_FREQ, + 0, config_index, &resp); + if (ret) { + ctdp_level->mem_freq = 0; + return; + } + + ctdp_level->mem_freq = resp & GENMASK(7, 0); + debug_printf( + "cpu:%d ctdp:%d CONFIG_TDP_GET_MEM_FREQ resp:%x uncore mem_freq:%d\n", + cpu, config_index, resp, ctdp_level->mem_freq); +} + +int isst_get_tjmax_info(int cpu, int config_index, + struct isst_pkg_ctdp_level_info *ctdp_level) +{ + unsigned int resp; + int ret; + + ret = isst_send_mbox_command(cpu, CONFIG_TDP, CONFIG_TDP_GET_TJMAX_INFO, + 0, config_index, &resp); + if (ret) + return ret; + + ctdp_level->t_proc_hot = resp & GENMASK(7, 0); + + debug_printf( + "cpu:%d ctdp:%d CONFIG_TDP_GET_TJMAX_INFO resp:%x t_proc_hot:%d\n", + cpu, config_index, resp, ctdp_level->t_proc_hot); + + return 0; +} + +int isst_get_coremask_info(int cpu, int config_index, + struct isst_pkg_ctdp_level_info *ctdp_level) +{ + unsigned int resp; + int i, ret; + + ctdp_level->cpu_count = 0; + for (i = 0; i < 2; ++i) { + unsigned long long mask; + int cpu_count = 0; + + ret = isst_send_mbox_command(cpu, CONFIG_TDP, + CONFIG_TDP_GET_CORE_MASK, 0, + (i << 8) | config_index, &resp); + if (ret) + return ret; + + debug_printf( + "cpu:%d ctdp:%d mask:%d CONFIG_TDP_GET_CORE_MASK resp:%x\n", + cpu, config_index, i, resp); + + mask = (unsigned long long)resp << (32 * i); + set_cpu_mask_from_punit_coremask(cpu, mask, + ctdp_level->core_cpumask_size, + ctdp_level->core_cpumask, + &cpu_count); + ctdp_level->cpu_count += cpu_count; + debug_printf("cpu:%d ctdp:%d mask:%d cpu count:%d\n", cpu, + config_index, i, ctdp_level->cpu_count); + } + + return 0; +} + +int isst_get_get_trl_from_msr(int cpu, int *trl) +{ + unsigned long long msr_trl; + int ret; + + ret = isst_send_msr_command(cpu, 0x1AD, 0, &msr_trl); + if (ret) + return ret; + + trl[0] = msr_trl & GENMASK(7, 0); + trl[1] = (msr_trl & GENMASK(15, 8)) >> 8; + trl[2] = (msr_trl & GENMASK(23, 16)) >> 16; + trl[3] = (msr_trl & GENMASK(31, 24)) >> 24; + trl[4] = (msr_trl & GENMASK(39, 32)) >> 32; + trl[5] = (msr_trl & GENMASK(47, 40)) >> 40; + trl[6] = (msr_trl & GENMASK(55, 48)) >> 48; + trl[7] = (msr_trl & GENMASK(63, 56)) >> 56; + + return 0; +} + +int isst_get_get_trl(int cpu, int level, int avx_level, int *trl) +{ + unsigned int req, resp; + int ret; + + req = level | (avx_level << 16); + ret = isst_send_mbox_command(cpu, CONFIG_TDP, + CONFIG_TDP_GET_TURBO_LIMIT_RATIOS, 0, req, + &resp); + if (ret) + return ret; + + debug_printf( + "cpu:%d CONFIG_TDP_GET_TURBO_LIMIT_RATIOS req:%x resp:%x\n", + cpu, req, resp); + + trl[0] = resp & GENMASK(7, 0); + trl[1] = (resp & GENMASK(15, 8)) >> 8; + trl[2] = (resp & GENMASK(23, 16)) >> 16; + trl[3] = (resp & GENMASK(31, 24)) >> 24; + + req = level | BIT(8) | (avx_level << 16); + ret = isst_send_mbox_command(cpu, CONFIG_TDP, + CONFIG_TDP_GET_TURBO_LIMIT_RATIOS, 0, req, + &resp); + if (ret) + return ret; + + debug_printf("cpu:%d CONFIG_TDP_GET_TURBO_LIMIT req:%x resp:%x\n", cpu, + req, resp); + + trl[4] = resp & GENMASK(7, 0); + trl[5] = (resp & GENMASK(15, 8)) >> 8; + trl[6] = (resp & GENMASK(23, 16)) >> 16; + trl[7] = (resp & GENMASK(31, 24)) >> 24; + + return 0; +} + +int isst_get_trl_bucket_info(int cpu, unsigned long long *buckets_info) +{ + int ret; + + debug_printf("cpu:%d bucket info via MSR\n", cpu); + + *buckets_info = 0; + + ret = isst_send_msr_command(cpu, 0x1ae, 0, buckets_info); + if (ret) + return ret; + + debug_printf("cpu:%d bucket info via MSR successful 0x%llx\n", cpu, + *buckets_info); + + return 0; +} + +int isst_set_tdp_level_msr(int cpu, int tdp_level) +{ + unsigned long long level = tdp_level; + int ret; + + debug_printf("cpu: tdp_level via MSR %d\n", cpu, tdp_level); + + if (isst_get_config_tdp_lock_status(cpu)) { + isst_display_error_info_message(1, "tdp_locked", 0, 0); + return -1; + } + + if (tdp_level > 2) + return -1; /* invalid value */ + + ret = isst_send_msr_command(cpu, 0x64b, 1, &level); + if (ret) + return ret; + + debug_printf("cpu: tdp_level via MSR successful %d\n", cpu, tdp_level); + + return 0; +} + +int isst_set_tdp_level(int cpu, int tdp_level) +{ + unsigned int resp; + int ret; + + + if (isst_get_config_tdp_lock_status(cpu)) { + isst_display_error_info_message(1, "TDP is locked", 0, 0); + return -1; + + } + + ret = isst_send_mbox_command(cpu, CONFIG_TDP, CONFIG_TDP_SET_LEVEL, 0, + tdp_level, &resp); + if (ret) { + isst_display_error_info_message(1, "Set TDP level failed for level", 1, tdp_level); + return ret; + } + + return 0; +} + +int isst_get_pbf_info(int cpu, int level, struct isst_pbf_info *pbf_info) +{ + struct isst_pkg_ctdp_level_info ctdp_level; + struct isst_pkg_ctdp pkg_dev; + int i, ret, max_punit_core, max_mask_index; + unsigned int req, resp; + + ret = isst_get_ctdp_levels(cpu, &pkg_dev); + if (ret) { + isst_display_error_info_message(1, "Failed to get number of levels", 0, 0); + return ret; + } + + if (level > pkg_dev.levels) { + isst_display_error_info_message(1, "Invalid level", 1, level); + return -1; + } + + ret = isst_get_ctdp_control(cpu, level, &ctdp_level); + if (ret) + return ret; + + if (!ctdp_level.pbf_support) { + isst_display_error_info_message(1, "base-freq feature is not present at this level", 1, level); + return -1; + } + + pbf_info->core_cpumask_size = alloc_cpu_set(&pbf_info->core_cpumask); + + max_punit_core = get_max_punit_core_id(get_physical_package_id(cpu), get_physical_die_id(cpu)); + max_mask_index = max_punit_core > 32 ? 2 : 1; + + for (i = 0; i < max_mask_index; ++i) { + unsigned long long mask; + int count; + + ret = isst_send_mbox_command(cpu, CONFIG_TDP, + CONFIG_TDP_PBF_GET_CORE_MASK_INFO, + 0, (i << 8) | level, &resp); + if (ret) + break; + + debug_printf( + "cpu:%d CONFIG_TDP_PBF_GET_CORE_MASK_INFO resp:%x\n", + cpu, resp); + + mask = (unsigned long long)resp << (32 * i); + set_cpu_mask_from_punit_coremask(cpu, mask, + pbf_info->core_cpumask_size, + pbf_info->core_cpumask, + &count); + } + + req = level; + ret = isst_send_mbox_command(cpu, CONFIG_TDP, + CONFIG_TDP_PBF_GET_P1HI_P1LO_INFO, 0, req, + &resp); + if (ret) + return ret; + + debug_printf("cpu:%d CONFIG_TDP_PBF_GET_P1HI_P1LO_INFO resp:%x\n", cpu, + resp); + + pbf_info->p1_low = resp & 0xff; + pbf_info->p1_high = (resp & GENMASK(15, 8)) >> 8; + + req = level; + ret = isst_send_mbox_command( + cpu, CONFIG_TDP, CONFIG_TDP_PBF_GET_TDP_INFO, 0, req, &resp); + if (ret) + return ret; + + debug_printf("cpu:%d CONFIG_TDP_PBF_GET_TDP_INFO resp:%x\n", cpu, resp); + + pbf_info->tdp = resp & 0xffff; + + req = level; + ret = isst_send_mbox_command( + cpu, CONFIG_TDP, CONFIG_TDP_PBF_GET_TJ_MAX_INFO, 0, req, &resp); + if (ret) + return ret; + + debug_printf("cpu:%d CONFIG_TDP_PBF_GET_TJ_MAX_INFO resp:%x\n", cpu, + resp); + pbf_info->t_control = (resp >> 8) & 0xff; + pbf_info->t_prochot = resp & 0xff; + + return 0; +} + +void isst_get_pbf_info_complete(struct isst_pbf_info *pbf_info) +{ + free_cpu_set(pbf_info->core_cpumask); +} + +int isst_set_pbf_fact_status(int cpu, int pbf, int enable) +{ + struct isst_pkg_ctdp pkg_dev; + struct isst_pkg_ctdp_level_info ctdp_level; + int current_level; + unsigned int req = 0, resp; + int ret; + + ret = isst_get_ctdp_levels(cpu, &pkg_dev); + if (ret) + debug_printf("cpu:%d No support for dynamic ISST\n", cpu); + + current_level = pkg_dev.current_level; + + ret = isst_get_ctdp_control(cpu, current_level, &ctdp_level); + if (ret) + return ret; + + if (pbf) { + if (ctdp_level.fact_enabled) + req = BIT(16); + + if (enable) + req |= BIT(17); + else + req &= ~BIT(17); + } else { + + if (enable && !ctdp_level.sst_cp_enabled) + isst_display_error_info_message(0, "Make sure to execute before: core-power enable", 0, 0); + + if (ctdp_level.pbf_enabled) + req = BIT(17); + + if (enable) + req |= BIT(16); + else + req &= ~BIT(16); + } + + ret = isst_send_mbox_command(cpu, CONFIG_TDP, + CONFIG_TDP_SET_TDP_CONTROL, 0, req, &resp); + if (ret) + return ret; + + debug_printf("cpu:%d CONFIG_TDP_SET_TDP_CONTROL pbf/fact:%d req:%x\n", + cpu, pbf, req); + + return 0; +} + +int isst_get_fact_bucket_info(int cpu, int level, + struct isst_fact_bucket_info *bucket_info) +{ + unsigned int resp; + int i, k, ret; + + for (i = 0; i < 2; ++i) { + int j; + + ret = isst_send_mbox_command( + cpu, CONFIG_TDP, + CONFIG_TDP_GET_FACT_HP_TURBO_LIMIT_NUMCORES, 0, + (i << 8) | level, &resp); + if (ret) + return ret; + + debug_printf( + "cpu:%d CONFIG_TDP_GET_FACT_HP_TURBO_LIMIT_NUMCORES index:%d level:%d resp:%x\n", + cpu, i, level, resp); + + for (j = 0; j < 4; ++j) { + bucket_info[j + (i * 4)].high_priority_cores_count = + (resp >> (j * 8)) & 0xff; + } + } + + for (k = 0; k < 3; ++k) { + for (i = 0; i < 2; ++i) { + int j; + + ret = isst_send_mbox_command( + cpu, CONFIG_TDP, + CONFIG_TDP_GET_FACT_HP_TURBO_LIMIT_RATIOS, 0, + (k << 16) | (i << 8) | level, &resp); + if (ret) + return ret; + + debug_printf( + "cpu:%d CONFIG_TDP_GET_FACT_HP_TURBO_LIMIT_RATIOS index:%d level:%d avx:%d resp:%x\n", + cpu, i, level, k, resp); + + for (j = 0; j < 4; ++j) { + switch (k) { + case 0: + bucket_info[j + (i * 4)].sse_trl = + (resp >> (j * 8)) & 0xff; + break; + case 1: + bucket_info[j + (i * 4)].avx_trl = + (resp >> (j * 8)) & 0xff; + break; + case 2: + bucket_info[j + (i * 4)].avx512_trl = + (resp >> (j * 8)) & 0xff; + break; + default: + break; + } + } + } + } + + return 0; +} + +int isst_get_fact_info(int cpu, int level, int fact_bucket, struct isst_fact_info *fact_info) +{ + struct isst_pkg_ctdp_level_info ctdp_level; + struct isst_pkg_ctdp pkg_dev; + unsigned int resp; + int j, ret, print; + + ret = isst_get_ctdp_levels(cpu, &pkg_dev); + if (ret) { + isst_display_error_info_message(1, "Failed to get number of levels", 0, 0); + return ret; + } + + if (level > pkg_dev.levels) { + isst_display_error_info_message(1, "Invalid level", 1, level); + return -1; + } + + ret = isst_get_ctdp_control(cpu, level, &ctdp_level); + if (ret) + return ret; + + if (!ctdp_level.fact_support) { + isst_display_error_info_message(1, "turbo-freq feature is not present at this level", 1, level); + return -1; + } + + ret = isst_send_mbox_command(cpu, CONFIG_TDP, + CONFIG_TDP_GET_FACT_LP_CLIPPING_RATIO, 0, + level, &resp); + if (ret) + return ret; + + debug_printf("cpu:%d CONFIG_TDP_GET_FACT_LP_CLIPPING_RATIO resp:%x\n", + cpu, resp); + + fact_info->lp_clipping_ratio_license_sse = resp & 0xff; + fact_info->lp_clipping_ratio_license_avx2 = (resp >> 8) & 0xff; + fact_info->lp_clipping_ratio_license_avx512 = (resp >> 16) & 0xff; + + ret = isst_get_fact_bucket_info(cpu, level, fact_info->bucket_info); + if (ret) + return ret; + + print = 0; + for (j = 0; j < ISST_FACT_MAX_BUCKETS; ++j) { + if (fact_bucket != 0xff && fact_bucket != j) + continue; + + if (!fact_info->bucket_info[j].high_priority_cores_count) + break; + + print = 1; + } + if (!print) { + isst_display_error_info_message(1, "Invalid bucket", 0, 0); + return -1; + } + + return 0; +} + +int isst_set_trl(int cpu, unsigned long long trl) +{ + int ret; + + if (!trl) + trl = 0xFFFFFFFFFFFFFFFFULL; + + ret = isst_send_msr_command(cpu, 0x1AD, 1, &trl); + if (ret) + return ret; + + return 0; +} + +int isst_set_trl_from_current_tdp(int cpu, unsigned long long trl) +{ + unsigned long long msr_trl; + int ret; + + if (trl) { + msr_trl = trl; + } else { + struct isst_pkg_ctdp pkg_dev; + int trl[8]; + int i; + + ret = isst_get_ctdp_levels(cpu, &pkg_dev); + if (ret) + return ret; + + ret = isst_get_get_trl(cpu, pkg_dev.current_level, 0, trl); + if (ret) + return ret; + + msr_trl = 0; + for (i = 0; i < 8; ++i) { + unsigned long long _trl = trl[i]; + + msr_trl |= (_trl << (i * 8)); + } + } + ret = isst_send_msr_command(cpu, 0x1AD, 1, &msr_trl); + if (ret) + return ret; + + return 0; +} + +/* Return 1 if locked */ +int isst_get_config_tdp_lock_status(int cpu) +{ + unsigned long long tdp_control = 0; + int ret; + + ret = isst_send_msr_command(cpu, 0x64b, 0, &tdp_control); + if (ret) + return ret; + + ret = !!(tdp_control & BIT(31)); + + return ret; +} + +void isst_get_process_ctdp_complete(int cpu, struct isst_pkg_ctdp *pkg_dev) +{ + int i; + + if (!pkg_dev->processed) + return; + + for (i = 0; i < pkg_dev->levels; ++i) { + struct isst_pkg_ctdp_level_info *ctdp_level; + + ctdp_level = &pkg_dev->ctdp_level[i]; + if (ctdp_level->pbf_support) + free_cpu_set(ctdp_level->pbf_info.core_cpumask); + free_cpu_set(ctdp_level->core_cpumask); + } +} + +int isst_get_process_ctdp(int cpu, int tdp_level, struct isst_pkg_ctdp *pkg_dev) +{ + int i, ret, valid = 0; + + if (pkg_dev->processed) + return 0; + + ret = isst_get_ctdp_levels(cpu, pkg_dev); + if (ret) + return ret; + + debug_printf("cpu: %d ctdp enable:%d current level: %d levels:%d\n", + cpu, pkg_dev->enabled, pkg_dev->current_level, + pkg_dev->levels); + + if (tdp_level != 0xff && tdp_level > pkg_dev->levels) { + isst_display_error_info_message(1, "Invalid level", 0, 0); + return -1; + } + + if (!pkg_dev->enabled) + isst_display_error_info_message(0, "perf-profile feature is not supported, just base-config level 0 is valid", 0, 0); + + for (i = 0; i <= pkg_dev->levels; ++i) { + struct isst_pkg_ctdp_level_info *ctdp_level; + + if (tdp_level != 0xff && i != tdp_level) + continue; + + debug_printf("cpu:%d Get Information for TDP level:%d\n", cpu, + i); + ctdp_level = &pkg_dev->ctdp_level[i]; + + ctdp_level->level = i; + ctdp_level->control_cpu = cpu; + ctdp_level->pkg_id = get_physical_package_id(cpu); + ctdp_level->die_id = get_physical_die_id(cpu); + + ret = isst_get_ctdp_control(cpu, i, ctdp_level); + if (ret) + continue; + + valid = 1; + pkg_dev->processed = 1; + ctdp_level->processed = 1; + + if (ctdp_level->pbf_support) { + ret = isst_get_pbf_info(cpu, i, &ctdp_level->pbf_info); + if (!ret) + ctdp_level->pbf_found = 1; + } + + if (ctdp_level->fact_support) { + ret = isst_get_fact_info(cpu, i, 0xff, + &ctdp_level->fact_info); + if (ret) + return ret; + } + + if (!pkg_dev->enabled) { + int freq; + + freq = get_cpufreq_base_freq(cpu); + if (freq > 0) { + ctdp_level->sse_p1 = freq / 100000; + ctdp_level->tdp_ratio = ctdp_level->sse_p1; + } + + isst_get_get_trl_from_msr(cpu, ctdp_level->trl_sse_active_cores); + isst_get_trl_bucket_info(cpu, &ctdp_level->buckets_info); + continue; + } + + ret = isst_get_tdp_info(cpu, i, ctdp_level); + if (ret) + return ret; + + ret = isst_get_pwr_info(cpu, i, ctdp_level); + if (ret) + return ret; + + ret = isst_get_tjmax_info(cpu, i, ctdp_level); + if (ret) + return ret; + + ctdp_level->core_cpumask_size = + alloc_cpu_set(&ctdp_level->core_cpumask); + ret = isst_get_coremask_info(cpu, i, ctdp_level); + if (ret) + return ret; + + ret = isst_get_trl_bucket_info(cpu, &ctdp_level->buckets_info); + if (ret) + return ret; + + ret = isst_get_get_trl(cpu, i, 0, + ctdp_level->trl_sse_active_cores); + if (ret) + return ret; + + ret = isst_get_get_trl(cpu, i, 1, + ctdp_level->trl_avx_active_cores); + if (ret) + return ret; + + ret = isst_get_get_trl(cpu, i, 2, + ctdp_level->trl_avx_512_active_cores); + if (ret) + return ret; + + isst_get_uncore_p0_p1_info(cpu, i, ctdp_level); + isst_get_p1_info(cpu, i, ctdp_level); + isst_get_uncore_mem_freq(cpu, i, ctdp_level); + } + + if (!valid) + isst_display_error_info_message(0, "Invalid level, Can't get TDP control information at specified levels on cpu", 1, cpu); + + return 0; +} + +int isst_clos_get_clos_information(int cpu, int *enable, int *type) +{ + unsigned int resp; + int ret; + + ret = isst_send_mbox_command(cpu, CONFIG_CLOS, CLOS_PM_QOS_CONFIG, 0, 0, + &resp); + if (ret) + return ret; + + debug_printf("cpu:%d CLOS_PM_QOS_CONFIG resp:%x\n", cpu, resp); + + if (resp & BIT(1)) + *enable = 1; + else + *enable = 0; + + if (resp & BIT(2)) + *type = 1; + else + *type = 0; + + return 0; +} + +int isst_pm_qos_config(int cpu, int enable_clos, int priority_type) +{ + unsigned int req, resp; + int ret; + + if (!enable_clos) { + struct isst_pkg_ctdp pkg_dev; + struct isst_pkg_ctdp_level_info ctdp_level; + + ret = isst_get_ctdp_levels(cpu, &pkg_dev); + if (ret) { + debug_printf("isst_get_ctdp_levels\n"); + return ret; + } + + ret = isst_get_ctdp_control(cpu, pkg_dev.current_level, + &ctdp_level); + if (ret) + return ret; + + if (ctdp_level.fact_enabled) { + isst_display_error_info_message(1, "Ignoring request, turbo-freq feature is still enabled", 0, 0); + return -EINVAL; + } + ret = isst_write_pm_config(cpu, 0); + if (ret) + isst_display_error_info_message(0, "WRITE_PM_CONFIG command failed, ignoring error", 0, 0); + } else { + ret = isst_write_pm_config(cpu, 1); + if (ret) + isst_display_error_info_message(0, "WRITE_PM_CONFIG command failed, ignoring error", 0, 0); + } + + ret = isst_send_mbox_command(cpu, CONFIG_CLOS, CLOS_PM_QOS_CONFIG, 0, 0, + &resp); + if (ret) { + isst_display_error_info_message(1, "CLOS_PM_QOS_CONFIG command failed", 0, 0); + return ret; + } + + debug_printf("cpu:%d CLOS_PM_QOS_CONFIG resp:%x\n", cpu, resp); + + req = resp; + + if (enable_clos) + req = req | BIT(1); + else + req = req & ~BIT(1); + + if (priority_type > 1) + isst_display_error_info_message(1, "Invalid priority type: Changing type to ordered", 0, 0); + + if (priority_type) + req = req | BIT(2); + else + req = req & ~BIT(2); + + ret = isst_send_mbox_command(cpu, CONFIG_CLOS, CLOS_PM_QOS_CONFIG, + BIT(MBOX_CMD_WRITE_BIT), req, &resp); + if (ret) + return ret; + + debug_printf("cpu:%d CLOS_PM_QOS_CONFIG priority type:%d req:%x\n", cpu, + priority_type, req); + + return 0; +} + +int isst_pm_get_clos(int cpu, int clos, struct isst_clos_config *clos_config) +{ + unsigned int resp; + int ret; + + ret = isst_send_mbox_command(cpu, CONFIG_CLOS, CLOS_PM_CLOS, clos, 0, + &resp); + if (ret) + return ret; + + clos_config->pkg_id = get_physical_package_id(cpu); + clos_config->die_id = get_physical_die_id(cpu); + + clos_config->epp = resp & 0x0f; + clos_config->clos_prop_prio = (resp >> 4) & 0x0f; + clos_config->clos_min = (resp >> 8) & 0xff; + clos_config->clos_max = (resp >> 16) & 0xff; + clos_config->clos_desired = (resp >> 24) & 0xff; + + return 0; +} + +int isst_set_clos(int cpu, int clos, struct isst_clos_config *clos_config) +{ + unsigned int req, resp; + unsigned int param; + int ret; + + req = clos_config->epp & 0x0f; + req |= (clos_config->clos_prop_prio & 0x0f) << 4; + req |= (clos_config->clos_min & 0xff) << 8; + req |= (clos_config->clos_max & 0xff) << 16; + req |= (clos_config->clos_desired & 0xff) << 24; + + param = BIT(MBOX_CMD_WRITE_BIT) | clos; + + ret = isst_send_mbox_command(cpu, CONFIG_CLOS, CLOS_PM_CLOS, param, req, + &resp); + if (ret) + return ret; + + debug_printf("cpu:%d CLOS_PM_CLOS param:%x req:%x\n", cpu, param, req); + + return 0; +} + +int isst_clos_get_assoc_status(int cpu, int *clos_id) +{ + unsigned int resp; + unsigned int param; + int core_id, ret; + + core_id = find_phy_core_num(cpu); + param = core_id; + + ret = isst_send_mbox_command(cpu, CONFIG_CLOS, CLOS_PQR_ASSOC, param, 0, + &resp); + if (ret) + return ret; + + debug_printf("cpu:%d CLOS_PQR_ASSOC param:%x resp:%x\n", cpu, param, + resp); + *clos_id = (resp >> 16) & 0x03; + + return 0; +} + +int isst_clos_associate(int cpu, int clos_id) +{ + unsigned int req, resp; + unsigned int param; + int core_id, ret; + + req = (clos_id & 0x03) << 16; + core_id = find_phy_core_num(cpu); + param = BIT(MBOX_CMD_WRITE_BIT) | core_id; + + ret = isst_send_mbox_command(cpu, CONFIG_CLOS, CLOS_PQR_ASSOC, param, + req, &resp); + if (ret) + return ret; + + debug_printf("cpu:%d CLOS_PQR_ASSOC param:%x req:%x\n", cpu, param, + req); + + return 0; +} diff --git a/tools/power/x86/intel-speed-select/isst-display.c b/tools/power/x86/intel-speed-select/isst-display.c new file mode 100644 index 000000000..f32ce0362 --- /dev/null +++ b/tools/power/x86/intel-speed-select/isst-display.c @@ -0,0 +1,773 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Intel dynamic_speed_select -- Enumerate and control features + * Copyright (c) 2019 Intel Corporation. + */ + +#include "isst.h" + +static void printcpulist(int str_len, char *str, int mask_size, + cpu_set_t *cpu_mask) +{ + int i, first, curr_index, index; + + if (!CPU_COUNT_S(mask_size, cpu_mask)) { + snprintf(str, str_len, "none"); + return; + } + + curr_index = 0; + first = 1; + for (i = 0; i < get_topo_max_cpus(); ++i) { + if (!CPU_ISSET_S(i, mask_size, cpu_mask)) + continue; + if (!first) { + index = snprintf(&str[curr_index], + str_len - curr_index, ","); + curr_index += index; + if (curr_index >= str_len) + break; + } + index = snprintf(&str[curr_index], str_len - curr_index, "%d", + i); + curr_index += index; + if (curr_index >= str_len) + break; + first = 0; + } +} + +static void printcpumask(int str_len, char *str, int mask_size, + cpu_set_t *cpu_mask) +{ + int i, max_cpus = get_topo_max_cpus(); + unsigned int *mask; + int size, index, curr_index; + + size = max_cpus / (sizeof(unsigned int) * 8); + if (max_cpus % (sizeof(unsigned int) * 8)) + size++; + + mask = calloc(size, sizeof(unsigned int)); + if (!mask) + return; + + for (i = 0; i < max_cpus; ++i) { + int mask_index, bit_index; + + if (!CPU_ISSET_S(i, mask_size, cpu_mask)) + continue; + + mask_index = i / (sizeof(unsigned int) * 8); + bit_index = i % (sizeof(unsigned int) * 8); + mask[mask_index] |= BIT(bit_index); + } + + curr_index = 0; + for (i = size - 1; i >= 0; --i) { + index = snprintf(&str[curr_index], str_len - curr_index, "%08x", + mask[i]); + curr_index += index; + if (curr_index >= str_len) + break; + if (i) { + strncat(&str[curr_index], ",", str_len - curr_index); + curr_index++; + } + if (curr_index >= str_len) + break; + } + + free(mask); +} + +static void format_and_print_txt(FILE *outf, int level, char *header, + char *value) +{ + char *spaces = " "; + static char delimiters[256]; + int i, j = 0; + + if (!level) + return; + + if (level == 1) { + strcpy(delimiters, " "); + } else { + for (i = 0; i < level - 1; ++i) + j += snprintf(&delimiters[j], sizeof(delimiters) - j, + "%s", spaces); + } + + if (header && value) { + fprintf(outf, "%s", delimiters); + fprintf(outf, "%s:%s\n", header, value); + } else if (header) { + fprintf(outf, "%s", delimiters); + fprintf(outf, "%s\n", header); + } +} + +static int last_level; +static void format_and_print(FILE *outf, int level, char *header, char *value) +{ + char *spaces = " "; + static char delimiters[256]; + int i; + + if (!out_format_is_json()) { + format_and_print_txt(outf, level, header, value); + return; + } + + if (level == 0) { + if (header) + fprintf(outf, "{"); + else + fprintf(outf, "\n}\n"); + + } else { + int j = 0; + + for (i = 0; i < level; ++i) + j += snprintf(&delimiters[j], sizeof(delimiters) - j, + "%s", spaces); + + if (last_level == level) + fprintf(outf, ",\n"); + + if (value) { + if (last_level != level) + fprintf(outf, "\n"); + + fprintf(outf, "%s\"%s\": ", delimiters, header); + fprintf(outf, "\"%s\"", value); + } else { + for (i = last_level - 1; i >= level; --i) { + int k = 0; + + for (j = i; j > 0; --j) + k += snprintf(&delimiters[k], + sizeof(delimiters) - k, + "%s", spaces); + if (i == level && header) + fprintf(outf, "\n%s},", delimiters); + else + fprintf(outf, "\n%s}", delimiters); + } + if (abs(last_level - level) < 3) + fprintf(outf, "\n"); + if (header) + fprintf(outf, "%s\"%s\": {", delimiters, + header); + } + } + + last_level = level; +} + +static int print_package_info(int cpu, FILE *outf) +{ + char header[256]; + + if (out_format_is_json()) { + snprintf(header, sizeof(header), "package-%d:die-%d:cpu-%d", + get_physical_package_id(cpu), get_physical_die_id(cpu), + cpu); + format_and_print(outf, 1, header, NULL); + return 1; + } + snprintf(header, sizeof(header), "package-%d", + get_physical_package_id(cpu)); + format_and_print(outf, 1, header, NULL); + snprintf(header, sizeof(header), "die-%d", get_physical_die_id(cpu)); + format_and_print(outf, 2, header, NULL); + snprintf(header, sizeof(header), "cpu-%d", cpu); + format_and_print(outf, 3, header, NULL); + + return 3; +} + +static void _isst_pbf_display_information(int cpu, FILE *outf, int level, + struct isst_pbf_info *pbf_info, + int disp_level) +{ + char header[256]; + char value[512]; + + snprintf(header, sizeof(header), "speed-select-base-freq-properties"); + format_and_print(outf, disp_level, header, NULL); + + snprintf(header, sizeof(header), "high-priority-base-frequency(MHz)"); + snprintf(value, sizeof(value), "%d", + pbf_info->p1_high * DISP_FREQ_MULTIPLIER); + format_and_print(outf, disp_level + 1, header, value); + + snprintf(header, sizeof(header), "high-priority-cpu-mask"); + printcpumask(sizeof(value), value, pbf_info->core_cpumask_size, + pbf_info->core_cpumask); + format_and_print(outf, disp_level + 1, header, value); + + snprintf(header, sizeof(header), "high-priority-cpu-list"); + printcpulist(sizeof(value), value, + pbf_info->core_cpumask_size, + pbf_info->core_cpumask); + format_and_print(outf, disp_level + 1, header, value); + + snprintf(header, sizeof(header), "low-priority-base-frequency(MHz)"); + snprintf(value, sizeof(value), "%d", + pbf_info->p1_low * DISP_FREQ_MULTIPLIER); + format_and_print(outf, disp_level + 1, header, value); + + if (is_clx_n_platform()) + return; + + snprintf(header, sizeof(header), "tjunction-temperature(C)"); + snprintf(value, sizeof(value), "%d", pbf_info->t_prochot); + format_and_print(outf, disp_level + 1, header, value); + + snprintf(header, sizeof(header), "thermal-design-power(W)"); + snprintf(value, sizeof(value), "%d", pbf_info->tdp); + format_and_print(outf, disp_level + 1, header, value); +} + +static void _isst_fact_display_information(int cpu, FILE *outf, int level, + int fact_bucket, int fact_avx, + struct isst_fact_info *fact_info, + int base_level) +{ + struct isst_fact_bucket_info *bucket_info = fact_info->bucket_info; + char header[256]; + char value[256]; + int print = 0, j; + + for (j = 0; j < ISST_FACT_MAX_BUCKETS; ++j) { + if (fact_bucket != 0xff && fact_bucket != j) + continue; + + if (!bucket_info[j].high_priority_cores_count) + break; + + print = 1; + } + if (!print) { + fprintf(stderr, "Invalid bucket\n"); + return; + } + + snprintf(header, sizeof(header), "speed-select-turbo-freq-properties"); + format_and_print(outf, base_level, header, NULL); + for (j = 0; j < ISST_FACT_MAX_BUCKETS; ++j) { + if (fact_bucket != 0xff && fact_bucket != j) + continue; + + if (!bucket_info[j].high_priority_cores_count) + break; + + snprintf(header, sizeof(header), "bucket-%d", j); + format_and_print(outf, base_level + 1, header, NULL); + + snprintf(header, sizeof(header), "high-priority-cores-count"); + snprintf(value, sizeof(value), "%d", + bucket_info[j].high_priority_cores_count); + format_and_print(outf, base_level + 2, header, value); + + if (fact_avx & 0x01) { + snprintf(header, sizeof(header), + "high-priority-max-frequency(MHz)"); + snprintf(value, sizeof(value), "%d", + bucket_info[j].sse_trl * DISP_FREQ_MULTIPLIER); + format_and_print(outf, base_level + 2, header, value); + } + + if (fact_avx & 0x02) { + snprintf(header, sizeof(header), + "high-priority-max-avx2-frequency(MHz)"); + snprintf(value, sizeof(value), "%d", + bucket_info[j].avx_trl * DISP_FREQ_MULTIPLIER); + format_and_print(outf, base_level + 2, header, value); + } + + if (fact_avx & 0x04) { + snprintf(header, sizeof(header), + "high-priority-max-avx512-frequency(MHz)"); + snprintf(value, sizeof(value), "%d", + bucket_info[j].avx512_trl * + DISP_FREQ_MULTIPLIER); + format_and_print(outf, base_level + 2, header, value); + } + } + snprintf(header, sizeof(header), + "speed-select-turbo-freq-clip-frequencies"); + format_and_print(outf, base_level + 1, header, NULL); + snprintf(header, sizeof(header), "low-priority-max-frequency(MHz)"); + snprintf(value, sizeof(value), "%d", + fact_info->lp_clipping_ratio_license_sse * + DISP_FREQ_MULTIPLIER); + format_and_print(outf, base_level + 2, header, value); + snprintf(header, sizeof(header), + "low-priority-max-avx2-frequency(MHz)"); + snprintf(value, sizeof(value), "%d", + fact_info->lp_clipping_ratio_license_avx2 * + DISP_FREQ_MULTIPLIER); + format_and_print(outf, base_level + 2, header, value); + snprintf(header, sizeof(header), + "low-priority-max-avx512-frequency(MHz)"); + snprintf(value, sizeof(value), "%d", + fact_info->lp_clipping_ratio_license_avx512 * + DISP_FREQ_MULTIPLIER); + format_and_print(outf, base_level + 2, header, value); +} + +void isst_ctdp_display_core_info(int cpu, FILE *outf, char *prefix, + unsigned int val, char *str0, char *str1) +{ + char header[256]; + char value[256]; + int level = 1; + + if (out_format_is_json()) { + snprintf(header, sizeof(header), "package-%d:die-%d:cpu-%d", + get_physical_package_id(cpu), get_physical_die_id(cpu), + cpu); + format_and_print(outf, level++, header, NULL); + } else { + snprintf(header, sizeof(header), "package-%d", + get_physical_package_id(cpu)); + format_and_print(outf, level++, header, NULL); + snprintf(header, sizeof(header), "die-%d", + get_physical_die_id(cpu)); + format_and_print(outf, level++, header, NULL); + snprintf(header, sizeof(header), "cpu-%d", cpu); + format_and_print(outf, level++, header, NULL); + } + + if (str0 && !val) + snprintf(value, sizeof(value), "%s", str0); + else if (str1 && val) + snprintf(value, sizeof(value), "%s", str1); + else + snprintf(value, sizeof(value), "%u", val); + format_and_print(outf, level, prefix, value); + + format_and_print(outf, 1, NULL, NULL); +} + +void isst_ctdp_display_information(int cpu, FILE *outf, int tdp_level, + struct isst_pkg_ctdp *pkg_dev) +{ + char header[256]; + char value[512]; + static int level; + int i; + + if (pkg_dev->processed) + level = print_package_info(cpu, outf); + + for (i = 0; i <= pkg_dev->levels; ++i) { + struct isst_pkg_ctdp_level_info *ctdp_level; + int j; + + ctdp_level = &pkg_dev->ctdp_level[i]; + if (!ctdp_level->processed) + continue; + + snprintf(header, sizeof(header), "perf-profile-level-%d", + ctdp_level->level); + format_and_print(outf, level + 1, header, NULL); + + snprintf(header, sizeof(header), "cpu-count"); + j = get_cpu_count(get_physical_die_id(cpu), + get_physical_die_id(cpu)); + snprintf(value, sizeof(value), "%d", j); + format_and_print(outf, level + 2, header, value); + + j = CPU_COUNT_S(ctdp_level->core_cpumask_size, + ctdp_level->core_cpumask); + if (j) { + snprintf(header, sizeof(header), "enable-cpu-count"); + snprintf(value, sizeof(value), "%d", j); + format_and_print(outf, level + 2, header, value); + } + + if (ctdp_level->core_cpumask_size) { + snprintf(header, sizeof(header), "enable-cpu-mask"); + printcpumask(sizeof(value), value, + ctdp_level->core_cpumask_size, + ctdp_level->core_cpumask); + format_and_print(outf, level + 2, header, value); + + snprintf(header, sizeof(header), "enable-cpu-list"); + printcpulist(sizeof(value), value, + ctdp_level->core_cpumask_size, + ctdp_level->core_cpumask); + format_and_print(outf, level + 2, header, value); + } + + snprintf(header, sizeof(header), "thermal-design-power-ratio"); + snprintf(value, sizeof(value), "%d", ctdp_level->tdp_ratio); + format_and_print(outf, level + 2, header, value); + + snprintf(header, sizeof(header), "base-frequency(MHz)"); + if (!ctdp_level->sse_p1) + ctdp_level->sse_p1 = ctdp_level->tdp_ratio; + snprintf(value, sizeof(value), "%d", + ctdp_level->sse_p1 * DISP_FREQ_MULTIPLIER); + format_and_print(outf, level + 2, header, value); + + if (ctdp_level->avx2_p1) { + snprintf(header, sizeof(header), "base-frequency-avx2(MHz)"); + snprintf(value, sizeof(value), "%d", + ctdp_level->avx2_p1 * DISP_FREQ_MULTIPLIER); + format_and_print(outf, level + 2, header, value); + } + + if (ctdp_level->avx512_p1) { + snprintf(header, sizeof(header), "base-frequency-avx512(MHz)"); + snprintf(value, sizeof(value), "%d", + ctdp_level->avx512_p1 * DISP_FREQ_MULTIPLIER); + format_and_print(outf, level + 2, header, value); + } + + if (ctdp_level->uncore_p1) { + snprintf(header, sizeof(header), "uncore-frequency-min(MHz)"); + snprintf(value, sizeof(value), "%d", + ctdp_level->uncore_p1 * DISP_FREQ_MULTIPLIER); + format_and_print(outf, level + 2, header, value); + } + + if (ctdp_level->uncore_p0) { + snprintf(header, sizeof(header), "uncore-frequency-max(MHz)"); + snprintf(value, sizeof(value), "%d", + ctdp_level->uncore_p0 * DISP_FREQ_MULTIPLIER); + format_and_print(outf, level + 2, header, value); + } + + if (ctdp_level->mem_freq) { + snprintf(header, sizeof(header), "mem-frequency(MHz)"); + snprintf(value, sizeof(value), "%d", + ctdp_level->mem_freq * DISP_FREQ_MULTIPLIER); + format_and_print(outf, level + 2, header, value); + } + + snprintf(header, sizeof(header), + "speed-select-turbo-freq"); + if (ctdp_level->fact_support) { + if (ctdp_level->fact_enabled) + snprintf(value, sizeof(value), "enabled"); + else + snprintf(value, sizeof(value), "disabled"); + } else + snprintf(value, sizeof(value), "unsupported"); + format_and_print(outf, level + 2, header, value); + + snprintf(header, sizeof(header), + "speed-select-base-freq"); + if (ctdp_level->pbf_support) { + if (ctdp_level->pbf_enabled) + snprintf(value, sizeof(value), "enabled"); + else + snprintf(value, sizeof(value), "disabled"); + } else + snprintf(value, sizeof(value), "unsupported"); + format_and_print(outf, level + 2, header, value); + + snprintf(header, sizeof(header), + "speed-select-core-power"); + if (ctdp_level->sst_cp_support) { + if (ctdp_level->sst_cp_enabled) + snprintf(value, sizeof(value), "enabled"); + else + snprintf(value, sizeof(value), "disabled"); + } else + snprintf(value, sizeof(value), "unsupported"); + format_and_print(outf, level + 2, header, value); + + if (is_clx_n_platform()) { + if (ctdp_level->pbf_support) + _isst_pbf_display_information(cpu, outf, + tdp_level, + &ctdp_level->pbf_info, + level + 2); + continue; + } + + if (ctdp_level->pkg_tdp) { + snprintf(header, sizeof(header), "thermal-design-power(W)"); + snprintf(value, sizeof(value), "%d", ctdp_level->pkg_tdp); + format_and_print(outf, level + 2, header, value); + } + + if (ctdp_level->t_proc_hot) { + snprintf(header, sizeof(header), "tjunction-max(C)"); + snprintf(value, sizeof(value), "%d", ctdp_level->t_proc_hot); + format_and_print(outf, level + 2, header, value); + } + + snprintf(header, sizeof(header), "turbo-ratio-limits-sse"); + format_and_print(outf, level + 2, header, NULL); + for (j = 0; j < 8; ++j) { + snprintf(header, sizeof(header), "bucket-%d", j); + format_and_print(outf, level + 3, header, NULL); + + snprintf(header, sizeof(header), "core-count"); + snprintf(value, sizeof(value), "%llu", (ctdp_level->buckets_info >> (j * 8)) & 0xff); + format_and_print(outf, level + 4, header, value); + + snprintf(header, sizeof(header), + "max-turbo-frequency(MHz)"); + snprintf(value, sizeof(value), "%d", + ctdp_level->trl_sse_active_cores[j] * + DISP_FREQ_MULTIPLIER); + format_and_print(outf, level + 4, header, value); + } + + if (ctdp_level->trl_avx_active_cores[0]) { + snprintf(header, sizeof(header), "turbo-ratio-limits-avx2"); + format_and_print(outf, level + 2, header, NULL); + for (j = 0; j < 8; ++j) { + snprintf(header, sizeof(header), "bucket-%d", j); + format_and_print(outf, level + 3, header, NULL); + + snprintf(header, sizeof(header), "core-count"); + snprintf(value, sizeof(value), "%llu", (ctdp_level->buckets_info >> (j * 8)) & 0xff); + format_and_print(outf, level + 4, header, value); + + snprintf(header, sizeof(header), "max-turbo-frequency(MHz)"); + snprintf(value, sizeof(value), "%d", ctdp_level->trl_avx_active_cores[j] * DISP_FREQ_MULTIPLIER); + format_and_print(outf, level + 4, header, value); + } + } + + if (ctdp_level->trl_avx_512_active_cores[0]) { + snprintf(header, sizeof(header), "turbo-ratio-limits-avx512"); + format_and_print(outf, level + 2, header, NULL); + for (j = 0; j < 8; ++j) { + snprintf(header, sizeof(header), "bucket-%d", j); + format_and_print(outf, level + 3, header, NULL); + + snprintf(header, sizeof(header), "core-count"); + snprintf(value, sizeof(value), "%llu", (ctdp_level->buckets_info >> (j * 8)) & 0xff); + format_and_print(outf, level + 4, header, value); + + snprintf(header, sizeof(header), "max-turbo-frequency(MHz)"); + snprintf(value, sizeof(value), "%d", ctdp_level->trl_avx_512_active_cores[j] * DISP_FREQ_MULTIPLIER); + format_and_print(outf, level + 4, header, value); + } + } + + if (ctdp_level->pbf_support) + _isst_pbf_display_information(cpu, outf, i, + &ctdp_level->pbf_info, + level + 2); + if (ctdp_level->fact_support) + _isst_fact_display_information(cpu, outf, i, 0xff, 0xff, + &ctdp_level->fact_info, + level + 2); + } + + format_and_print(outf, 1, NULL, NULL); +} + +static int start; +void isst_ctdp_display_information_start(FILE *outf) +{ + last_level = 0; + format_and_print(outf, 0, "start", NULL); + start = 1; +} + +void isst_ctdp_display_information_end(FILE *outf) +{ + format_and_print(outf, 0, NULL, NULL); + start = 0; +} + +void isst_pbf_display_information(int cpu, FILE *outf, int level, + struct isst_pbf_info *pbf_info) +{ + int _level; + + _level = print_package_info(cpu, outf); + _isst_pbf_display_information(cpu, outf, level, pbf_info, _level + 1); + format_and_print(outf, 1, NULL, NULL); +} + +void isst_fact_display_information(int cpu, FILE *outf, int level, + int fact_bucket, int fact_avx, + struct isst_fact_info *fact_info) +{ + int _level; + + _level = print_package_info(cpu, outf); + _isst_fact_display_information(cpu, outf, level, fact_bucket, fact_avx, + fact_info, _level + 1); + format_and_print(outf, 1, NULL, NULL); +} + +void isst_clos_display_information(int cpu, FILE *outf, int clos, + struct isst_clos_config *clos_config) +{ + char header[256]; + char value[256]; + int level; + + level = print_package_info(cpu, outf); + + snprintf(header, sizeof(header), "core-power"); + format_and_print(outf, level + 1, header, NULL); + + snprintf(header, sizeof(header), "clos"); + snprintf(value, sizeof(value), "%d", clos); + format_and_print(outf, level + 2, header, value); + + snprintf(header, sizeof(header), "epp"); + snprintf(value, sizeof(value), "%d", clos_config->epp); + format_and_print(outf, level + 2, header, value); + + snprintf(header, sizeof(header), "clos-proportional-priority"); + snprintf(value, sizeof(value), "%d", clos_config->clos_prop_prio); + format_and_print(outf, level + 2, header, value); + + snprintf(header, sizeof(header), "clos-min"); + snprintf(value, sizeof(value), "%d MHz", clos_config->clos_min * DISP_FREQ_MULTIPLIER); + format_and_print(outf, level + 2, header, value); + + snprintf(header, sizeof(header), "clos-max"); + if (clos_config->clos_max == 0xff) + snprintf(value, sizeof(value), "Max Turbo frequency"); + else + snprintf(value, sizeof(value), "%d MHz", clos_config->clos_max * DISP_FREQ_MULTIPLIER); + format_and_print(outf, level + 2, header, value); + + snprintf(header, sizeof(header), "clos-desired"); + snprintf(value, sizeof(value), "%d MHz", clos_config->clos_desired * DISP_FREQ_MULTIPLIER); + format_and_print(outf, level + 2, header, value); + + format_and_print(outf, level, NULL, NULL); +} + +void isst_clos_display_clos_information(int cpu, FILE *outf, + int clos_enable, int type, + int state, int cap) +{ + char header[256]; + char value[256]; + int level; + + level = print_package_info(cpu, outf); + + snprintf(header, sizeof(header), "core-power"); + format_and_print(outf, level + 1, header, NULL); + + snprintf(header, sizeof(header), "support-status"); + if (cap) + snprintf(value, sizeof(value), "supported"); + else + snprintf(value, sizeof(value), "unsupported"); + format_and_print(outf, level + 2, header, value); + + snprintf(header, sizeof(header), "enable-status"); + if (state) + snprintf(value, sizeof(value), "enabled"); + else + snprintf(value, sizeof(value), "disabled"); + format_and_print(outf, level + 2, header, value); + + snprintf(header, sizeof(header), "clos-enable-status"); + if (clos_enable) + snprintf(value, sizeof(value), "enabled"); + else + snprintf(value, sizeof(value), "disabled"); + format_and_print(outf, level + 2, header, value); + + snprintf(header, sizeof(header), "priority-type"); + if (type) + snprintf(value, sizeof(value), "ordered"); + else + snprintf(value, sizeof(value), "proportional"); + format_and_print(outf, level + 2, header, value); + + format_and_print(outf, level, NULL, NULL); +} + +void isst_clos_display_assoc_information(int cpu, FILE *outf, int clos) +{ + char header[256]; + char value[256]; + int level; + + level = print_package_info(cpu, outf); + + snprintf(header, sizeof(header), "get-assoc"); + format_and_print(outf, level + 1, header, NULL); + + snprintf(header, sizeof(header), "clos"); + snprintf(value, sizeof(value), "%d", clos); + format_and_print(outf, level + 2, header, value); + + format_and_print(outf, level, NULL, NULL); +} + +void isst_display_result(int cpu, FILE *outf, char *feature, char *cmd, + int result) +{ + char header[256]; + char value[256]; + int level = 3; + + if (cpu >= 0) + level = print_package_info(cpu, outf); + + snprintf(header, sizeof(header), "%s", feature); + format_and_print(outf, level + 1, header, NULL); + snprintf(header, sizeof(header), "%s", cmd); + if (!result) + snprintf(value, sizeof(value), "success"); + else + snprintf(value, sizeof(value), "failed(error %d)", result); + format_and_print(outf, level + 2, header, value); + + format_and_print(outf, level, NULL, NULL); +} + +void isst_display_error_info_message(int error, char *msg, int arg_valid, int arg) +{ + FILE *outf = get_output_file(); + static int error_index; + char header[256]; + char value[256]; + + if (!out_format_is_json()) { + if (arg_valid) + snprintf(value, sizeof(value), "%s %d", msg, arg); + else + snprintf(value, sizeof(value), "%s", msg); + + if (error) + fprintf(outf, "Error: %s\n", value); + else + fprintf(outf, "Information: %s\n", value); + return; + } + + if (!start) + format_and_print(outf, 0, "start", NULL); + + if (error) + snprintf(header, sizeof(header), "Error%d", error_index++); + else + snprintf(header, sizeof(header), "Information:%d", error_index++); + format_and_print(outf, 1, header, NULL); + + snprintf(header, sizeof(header), "message"); + if (arg_valid) + snprintf(value, sizeof(value), "%s %d", msg, arg); + else + snprintf(value, sizeof(value), "%s", msg); + + format_and_print(outf, 2, header, value); + format_and_print(outf, 1, NULL, NULL); + if (!start) + format_and_print(outf, 0, NULL, NULL); +} diff --git a/tools/power/x86/intel-speed-select/isst.h b/tools/power/x86/intel-speed-select/isst.h new file mode 100644 index 000000000..29715e9c2 --- /dev/null +++ b/tools/power/x86/intel-speed-select/isst.h @@ -0,0 +1,258 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Intel Speed Select -- Enumerate and control features + * Copyright (c) 2019 Intel Corporation. + */ + +#ifndef _ISST_H_ +#define _ISST_H_ + +#include <stdio.h> +#include <unistd.h> +#include <sys/types.h> +#include <sched.h> +#include <sys/stat.h> +#include <sys/resource.h> +#include <getopt.h> +#include <err.h> +#include <fcntl.h> +#include <signal.h> +#include <sys/time.h> +#include <limits.h> +#include <stdlib.h> +#include <string.h> +#include <cpuid.h> +#include <dirent.h> +#include <errno.h> + +#include <stdarg.h> +#include <sys/ioctl.h> + +#define BIT(x) (1 << (x)) +#define BIT_ULL(nr) (1ULL << (nr)) +#define GENMASK(h, l) (((~0UL) << (l)) & (~0UL >> (sizeof(long) * 8 - 1 - (h)))) +#define GENMASK_ULL(h, l) \ + (((~0ULL) << (l)) & (~0ULL >> (sizeof(long long) * 8 - 1 - (h)))) + +#define CONFIG_TDP 0x7f +#define CONFIG_TDP_GET_LEVELS_INFO 0x00 +#define CONFIG_TDP_GET_TDP_CONTROL 0x01 +#define CONFIG_TDP_SET_TDP_CONTROL 0x02 +#define CONFIG_TDP_GET_TDP_INFO 0x03 +#define CONFIG_TDP_GET_PWR_INFO 0x04 +#define CONFIG_TDP_GET_TJMAX_INFO 0x05 +#define CONFIG_TDP_GET_CORE_MASK 0x06 +#define CONFIG_TDP_GET_TURBO_LIMIT_RATIOS 0x07 +#define CONFIG_TDP_SET_LEVEL 0x08 +#define CONFIG_TDP_GET_UNCORE_P0_P1_INFO 0X09 +#define CONFIG_TDP_GET_P1_INFO 0x0a +#define CONFIG_TDP_GET_MEM_FREQ 0x0b + +#define CONFIG_TDP_GET_FACT_HP_TURBO_LIMIT_NUMCORES 0x10 +#define CONFIG_TDP_GET_FACT_HP_TURBO_LIMIT_RATIOS 0x11 +#define CONFIG_TDP_GET_FACT_LP_CLIPPING_RATIO 0x12 + +#define CONFIG_TDP_PBF_GET_CORE_MASK_INFO 0x20 +#define CONFIG_TDP_PBF_GET_P1HI_P1LO_INFO 0x21 +#define CONFIG_TDP_PBF_GET_TJ_MAX_INFO 0x22 +#define CONFIG_TDP_PBF_GET_TDP_INFO 0X23 + +#define CONFIG_CLOS 0xd0 +#define CLOS_PQR_ASSOC 0x00 +#define CLOS_PM_CLOS 0x01 +#define CLOS_PM_QOS_CONFIG 0x02 +#define CLOS_STATUS 0x03 + +#define MBOX_CMD_WRITE_BIT 0x08 + +#define PM_QOS_INFO_OFFSET 0x00 +#define PM_QOS_CONFIG_OFFSET 0x04 +#define PM_CLOS_OFFSET 0x08 +#define PQR_ASSOC_OFFSET 0x20 + +#define READ_PM_CONFIG 0x94 +#define WRITE_PM_CONFIG 0x95 +#define PM_FEATURE 0x03 + +#define DISP_FREQ_MULTIPLIER 100 + +struct isst_clos_config { + int pkg_id; + int die_id; + unsigned char epp; + unsigned char clos_prop_prio; + unsigned char clos_min; + unsigned char clos_max; + unsigned char clos_desired; +}; + +struct isst_fact_bucket_info { + int high_priority_cores_count; + int sse_trl; + int avx_trl; + int avx512_trl; +}; + +struct isst_pbf_info { + int pbf_acticated; + int pbf_available; + size_t core_cpumask_size; + cpu_set_t *core_cpumask; + int p1_high; + int p1_low; + int t_control; + int t_prochot; + int tdp; +}; + +#define ISST_TRL_MAX_ACTIVE_CORES 8 +#define ISST_FACT_MAX_BUCKETS 8 +struct isst_fact_info { + int lp_clipping_ratio_license_sse; + int lp_clipping_ratio_license_avx2; + int lp_clipping_ratio_license_avx512; + struct isst_fact_bucket_info bucket_info[ISST_FACT_MAX_BUCKETS]; +}; + +struct isst_pkg_ctdp_level_info { + int processed; + int control_cpu; + int pkg_id; + int die_id; + int level; + int fact_support; + int pbf_support; + int fact_enabled; + int pbf_enabled; + int sst_cp_support; + int sst_cp_enabled; + int tdp_ratio; + int active; + int tdp_control; + int pkg_tdp; + int pkg_min_power; + int pkg_max_power; + int fact; + int t_proc_hot; + int uncore_p0; + int uncore_p1; + int sse_p1; + int avx2_p1; + int avx512_p1; + int mem_freq; + size_t core_cpumask_size; + cpu_set_t *core_cpumask; + int cpu_count; + unsigned long long buckets_info; + int trl_sse_active_cores[ISST_TRL_MAX_ACTIVE_CORES]; + int trl_avx_active_cores[ISST_TRL_MAX_ACTIVE_CORES]; + int trl_avx_512_active_cores[ISST_TRL_MAX_ACTIVE_CORES]; + int kobj_bucket_index; + int active_bucket; + int fact_max_index; + int fact_max_config; + int pbf_found; + int pbf_active; + struct isst_pbf_info pbf_info; + struct isst_fact_info fact_info; +}; + +#define ISST_MAX_TDP_LEVELS (4 + 1) /* +1 for base config */ +struct isst_pkg_ctdp { + int locked; + int version; + int processed; + int levels; + int current_level; + int enabled; + struct isst_pkg_ctdp_level_info ctdp_level[ISST_MAX_TDP_LEVELS]; +}; + +extern int get_topo_max_cpus(void); +extern int get_cpu_count(int pkg_id, int die_id); +extern int get_max_punit_core_id(int pkg_id, int die_id); + +/* Common interfaces */ +FILE *get_output_file(void); +extern void debug_printf(const char *format, ...); +extern int out_format_is_json(void); +extern int get_physical_package_id(int cpu); +extern int get_physical_die_id(int cpu); +extern size_t alloc_cpu_set(cpu_set_t **cpu_set); +extern void free_cpu_set(cpu_set_t *cpu_set); +extern int find_logical_cpu(int pkg_id, int die_id, int phy_cpu); +extern int find_phy_cpu_num(int logical_cpu); +extern int find_phy_core_num(int logical_cpu); +extern void set_cpu_mask_from_punit_coremask(int cpu, + unsigned long long core_mask, + size_t core_cpumask_size, + cpu_set_t *core_cpumask, + int *cpu_cnt); + +extern int isst_send_mbox_command(unsigned int cpu, unsigned char command, + unsigned char sub_command, + unsigned int write, + unsigned int req_data, unsigned int *resp); + +extern int isst_send_msr_command(unsigned int cpu, unsigned int command, + int write, unsigned long long *req_resp); + +extern int isst_get_ctdp_levels(int cpu, struct isst_pkg_ctdp *pkg_dev); +extern int isst_get_ctdp_control(int cpu, int config_index, + struct isst_pkg_ctdp_level_info *ctdp_level); +extern int isst_get_coremask_info(int cpu, int config_index, + struct isst_pkg_ctdp_level_info *ctdp_level); +extern int isst_get_process_ctdp(int cpu, int tdp_level, + struct isst_pkg_ctdp *pkg_dev); +extern void isst_get_process_ctdp_complete(int cpu, + struct isst_pkg_ctdp *pkg_dev); +extern void isst_ctdp_display_information(int cpu, FILE *outf, int tdp_level, + struct isst_pkg_ctdp *pkg_dev); +extern void isst_ctdp_display_core_info(int cpu, FILE *outf, char *prefix, + unsigned int val, char *str0, char *str1); +extern void isst_ctdp_display_information_start(FILE *outf); +extern void isst_ctdp_display_information_end(FILE *outf); +extern void isst_pbf_display_information(int cpu, FILE *outf, int level, + struct isst_pbf_info *info); +extern int isst_set_tdp_level(int cpu, int tdp_level); +extern int isst_set_tdp_level_msr(int cpu, int tdp_level); +extern int isst_set_pbf_fact_status(int cpu, int pbf, int enable); +extern int isst_get_pbf_info(int cpu, int level, + struct isst_pbf_info *pbf_info); +extern void isst_get_pbf_info_complete(struct isst_pbf_info *pbf_info); +extern int isst_get_fact_info(int cpu, int level, int fact_bucket, + struct isst_fact_info *fact_info); +extern int isst_get_fact_bucket_info(int cpu, int level, + struct isst_fact_bucket_info *bucket_info); +extern void isst_fact_display_information(int cpu, FILE *outf, int level, + int fact_bucket, int fact_avx, + struct isst_fact_info *fact_info); +extern int isst_set_trl(int cpu, unsigned long long trl); +extern int isst_set_trl_from_current_tdp(int cpu, unsigned long long trl); +extern int isst_get_config_tdp_lock_status(int cpu); + +extern int isst_pm_qos_config(int cpu, int enable_clos, int priority_type); +extern int isst_pm_get_clos(int cpu, int clos, + struct isst_clos_config *clos_config); +extern int isst_set_clos(int cpu, int clos, + struct isst_clos_config *clos_config); +extern int isst_clos_associate(int cpu, int clos); +extern int isst_clos_get_assoc_status(int cpu, int *clos_id); +extern void isst_clos_display_information(int cpu, FILE *outf, int clos, + struct isst_clos_config *clos_config); +extern void isst_clos_display_assoc_information(int cpu, FILE *outf, int clos); +extern int isst_read_reg(unsigned short reg, unsigned int *val); +extern int isst_write_reg(int reg, unsigned int val); + +extern void isst_display_result(int cpu, FILE *outf, char *feature, char *cmd, + int result); + +extern int isst_clos_get_clos_information(int cpu, int *enable, int *type); +extern void isst_clos_display_clos_information(int cpu, FILE *outf, + int clos_enable, int type, + int state, int cap); +extern int is_clx_n_platform(void); +extern int get_cpufreq_base_freq(int cpu); +extern int isst_read_pm_config(int cpu, int *cp_state, int *cp_cap); +extern void isst_display_error_info_message(int error, char *msg, int arg_valid, int arg); +#endif diff --git a/tools/power/x86/intel_pstate_tracer/intel_pstate_tracer.py b/tools/power/x86/intel_pstate_tracer/intel_pstate_tracer.py new file mode 100755 index 000000000..e15e20696 --- /dev/null +++ b/tools/power/x86/intel_pstate_tracer/intel_pstate_tracer.py @@ -0,0 +1,615 @@ +#!/usr/bin/env python +# SPDX-License-Identifier: GPL-2.0-only +# -*- coding: utf-8 -*- +# +""" This utility can be used to debug and tune the performance of the +intel_pstate driver. This utility can be used in two ways: +- If there is Linux trace file with pstate_sample events enabled, then +this utility can parse the trace file and generate performance plots. +- If user has not specified a trace file as input via command line parameters, +then this utility enables and collects trace data for a user specified interval +and generates performance plots. + +Prerequisites: + Python version 2.7.x or higher + gnuplot 5.0 or higher + gnuplot-py 1.8 or higher + (Most of the distributions have these required packages. They may be called + gnuplot-py, phython-gnuplot or phython3-gnuplot, gnuplot-nox, ... ) + + HWP (Hardware P-States are disabled) + Kernel config for Linux trace is enabled + + see print_help(): for Usage and Output details + +""" +from __future__ import print_function +from datetime import datetime +import subprocess +import os +import time +import re +import signal +import sys +import getopt +import Gnuplot +from numpy import * +from decimal import * + +__author__ = "Srinivas Pandruvada" +__copyright__ = " Copyright (c) 2017, Intel Corporation. " +__license__ = "GPL version 2" + + +MAX_CPUS = 256 + +# Define the csv file columns +C_COMM = 18 +C_GHZ = 17 +C_ELAPSED = 16 +C_SAMPLE = 15 +C_DURATION = 14 +C_LOAD = 13 +C_BOOST = 12 +C_FREQ = 11 +C_TSC = 10 +C_APERF = 9 +C_MPERF = 8 +C_TO = 7 +C_FROM = 6 +C_SCALED = 5 +C_CORE = 4 +C_USEC = 3 +C_SEC = 2 +C_CPU = 1 + +global sample_num, last_sec_cpu, last_usec_cpu, start_time, testname + +# 11 digits covers uptime to 115 days +getcontext().prec = 11 + +sample_num =0 +last_sec_cpu = [0] * MAX_CPUS +last_usec_cpu = [0] * MAX_CPUS + +def print_help(): + print('intel_pstate_tracer.py:') + print(' Usage:') + print(' If the trace file is available, then to simply parse and plot, use (sudo not required):') + print(' ./intel_pstate_tracer.py [-c cpus] -t <trace_file> -n <test_name>') + print(' Or') + print(' ./intel_pstate_tracer.py [--cpu cpus] ---trace_file <trace_file> --name <test_name>') + print(' To generate trace file, parse and plot, use (sudo required):') + print(' sudo ./intel_pstate_tracer.py [-c cpus] -i <interval> -n <test_name> -m <kbytes>') + print(' Or') + print(' sudo ./intel_pstate_tracer.py [--cpu cpus] --interval <interval> --name <test_name> --memory <kbytes>') + print(' Optional argument:') + print(' cpus: comma separated list of CPUs') + print(' kbytes: Kilo bytes of memory per CPU to allocate to the trace buffer. Default: 10240') + print(' Output:') + print(' If not already present, creates a "results/test_name" folder in the current working directory with:') + print(' cpu.csv - comma seperated values file with trace contents and some additional calculations.') + print(' cpu???.csv - comma seperated values file for CPU number ???.') + print(' *.png - a variety of PNG format plot files created from the trace contents and the additional calculations.') + print(' Notes:') + print(' Avoid the use of _ (underscore) in test names, because in gnuplot it is a subscript directive.') + print(' Maximum number of CPUs is {0:d}. If there are more the script will abort with an error.'.format(MAX_CPUS)) + print(' Off-line CPUs cause the script to list some warnings, and create some empty files. Use the CPU mask feature for a clean run.') + print(' Empty y range warnings for autoscaled plots can occur and can be ignored.') + +def plot_perf_busy_with_sample(cpu_index): + """ Plot method to per cpu information """ + + file_name = 'cpu{:0>3}.csv'.format(cpu_index) + if os.path.exists(file_name): + output_png = "cpu%03d_perf_busy_vs_samples.png" % cpu_index + g_plot = common_all_gnuplot_settings(output_png) +# autoscale this one, no set y1 range + g_plot('set y2range [0:200]') + g_plot('set y2tics 0, 10') + g_plot('set title "{} : cpu perf busy vs. sample : CPU {:0>3} : {:%F %H:%M}"'.format(testname, cpu_index, datetime.now())) +# Override common + g_plot('set xlabel "Samples"') + g_plot('set ylabel "P-State"') + g_plot('set y2label "Scaled Busy/performance/io-busy(%)"') + set_4_plot_linestyles(g_plot) + g_plot('plot "' + file_name + '" using {:d}:{:d} with linespoints linestyle 1 axis x1y2 title "performance",\\'.format(C_SAMPLE, C_CORE)) + g_plot('"' + file_name + '" using {:d}:{:d} with linespoints linestyle 2 axis x1y2 title "scaled-busy",\\'.format(C_SAMPLE, C_SCALED)) + g_plot('"' + file_name + '" using {:d}:{:d} with linespoints linestyle 3 axis x1y2 title "io-boost",\\'.format(C_SAMPLE, C_BOOST)) + g_plot('"' + file_name + '" using {:d}:{:d} with linespoints linestyle 4 axis x1y1 title "P-State"'.format(C_SAMPLE, C_TO)) + +def plot_perf_busy(cpu_index): + """ Plot some per cpu information """ + + file_name = 'cpu{:0>3}.csv'.format(cpu_index) + if os.path.exists(file_name): + output_png = "cpu%03d_perf_busy.png" % cpu_index + g_plot = common_all_gnuplot_settings(output_png) +# autoscale this one, no set y1 range + g_plot('set y2range [0:200]') + g_plot('set y2tics 0, 10') + g_plot('set title "{} : perf busy : CPU {:0>3} : {:%F %H:%M}"'.format(testname, cpu_index, datetime.now())) + g_plot('set ylabel "P-State"') + g_plot('set y2label "Scaled Busy/performance/io-busy(%)"') + set_4_plot_linestyles(g_plot) + g_plot('plot "' + file_name + '" using {:d}:{:d} with linespoints linestyle 1 axis x1y2 title "performance",\\'.format(C_ELAPSED, C_CORE)) + g_plot('"' + file_name + '" using {:d}:{:d} with linespoints linestyle 2 axis x1y2 title "scaled-busy",\\'.format(C_ELAPSED, C_SCALED)) + g_plot('"' + file_name + '" using {:d}:{:d} with linespoints linestyle 3 axis x1y2 title "io-boost",\\'.format(C_ELAPSED, C_BOOST)) + g_plot('"' + file_name + '" using {:d}:{:d} with linespoints linestyle 4 axis x1y1 title "P-State"'.format(C_ELAPSED, C_TO)) + +def plot_durations(cpu_index): + """ Plot per cpu durations """ + + file_name = 'cpu{:0>3}.csv'.format(cpu_index) + if os.path.exists(file_name): + output_png = "cpu%03d_durations.png" % cpu_index + g_plot = common_all_gnuplot_settings(output_png) +# autoscale this one, no set y range + g_plot('set title "{} : durations : CPU {:0>3} : {:%F %H:%M}"'.format(testname, cpu_index, datetime.now())) + g_plot('set ylabel "Timer Duration (MilliSeconds)"') +# override common + g_plot('set key off') + set_4_plot_linestyles(g_plot) + g_plot('plot "' + file_name + '" using {:d}:{:d} with linespoints linestyle 1 axis x1y1'.format(C_ELAPSED, C_DURATION)) + +def plot_loads(cpu_index): + """ Plot per cpu loads """ + + file_name = 'cpu{:0>3}.csv'.format(cpu_index) + if os.path.exists(file_name): + output_png = "cpu%03d_loads.png" % cpu_index + g_plot = common_all_gnuplot_settings(output_png) + g_plot('set yrange [0:100]') + g_plot('set ytics 0, 10') + g_plot('set title "{} : loads : CPU {:0>3} : {:%F %H:%M}"'.format(testname, cpu_index, datetime.now())) + g_plot('set ylabel "CPU load (percent)"') +# override common + g_plot('set key off') + set_4_plot_linestyles(g_plot) + g_plot('plot "' + file_name + '" using {:d}:{:d} with linespoints linestyle 1 axis x1y1'.format(C_ELAPSED, C_LOAD)) + +def plot_pstate_cpu_with_sample(): + """ Plot all cpu information """ + + if os.path.exists('cpu.csv'): + output_png = 'all_cpu_pstates_vs_samples.png' + g_plot = common_all_gnuplot_settings(output_png) +# autoscale this one, no set y range +# override common + g_plot('set xlabel "Samples"') + g_plot('set ylabel "P-State"') + g_plot('set title "{} : cpu pstate vs. sample : {:%F %H:%M}"'.format(testname, datetime.now())) + title_list = subprocess.check_output('ls cpu???.csv | sed -e \'s/.csv//\'',shell=True).decode('utf-8').replace('\n', ' ') + plot_str = "plot for [i in title_list] i.'.csv' using {:d}:{:d} pt 7 ps 1 title i".format(C_SAMPLE, C_TO) + g_plot('title_list = "{}"'.format(title_list)) + g_plot(plot_str) + +def plot_pstate_cpu(): + """ Plot all cpu information from csv files """ + + output_png = 'all_cpu_pstates.png' + g_plot = common_all_gnuplot_settings(output_png) +# autoscale this one, no set y range + g_plot('set ylabel "P-State"') + g_plot('set title "{} : cpu pstates : {:%F %H:%M}"'.format(testname, datetime.now())) + +# the following command is really cool, but doesn't work with the CPU masking option because it aborts on the first missing file. +# plot_str = 'plot for [i=0:*] file=sprintf("cpu%03d.csv",i) title_s=sprintf("cpu%03d",i) file using 16:7 pt 7 ps 1 title title_s' +# + title_list = subprocess.check_output('ls cpu???.csv | sed -e \'s/.csv//\'',shell=True).decode('utf-8').replace('\n', ' ') + plot_str = "plot for [i in title_list] i.'.csv' using {:d}:{:d} pt 7 ps 1 title i".format(C_ELAPSED, C_TO) + g_plot('title_list = "{}"'.format(title_list)) + g_plot(plot_str) + +def plot_load_cpu(): + """ Plot all cpu loads """ + + output_png = 'all_cpu_loads.png' + g_plot = common_all_gnuplot_settings(output_png) + g_plot('set yrange [0:100]') + g_plot('set ylabel "CPU load (percent)"') + g_plot('set title "{} : cpu loads : {:%F %H:%M}"'.format(testname, datetime.now())) + + title_list = subprocess.check_output('ls cpu???.csv | sed -e \'s/.csv//\'',shell=True).decode('utf-8').replace('\n', ' ') + plot_str = "plot for [i in title_list] i.'.csv' using {:d}:{:d} pt 7 ps 1 title i".format(C_ELAPSED, C_LOAD) + g_plot('title_list = "{}"'.format(title_list)) + g_plot(plot_str) + +def plot_frequency_cpu(): + """ Plot all cpu frequencies """ + + output_png = 'all_cpu_frequencies.png' + g_plot = common_all_gnuplot_settings(output_png) +# autoscale this one, no set y range + g_plot('set ylabel "CPU Frequency (GHz)"') + g_plot('set title "{} : cpu frequencies : {:%F %H:%M}"'.format(testname, datetime.now())) + + title_list = subprocess.check_output('ls cpu???.csv | sed -e \'s/.csv//\'',shell=True).decode('utf-8').replace('\n', ' ') + plot_str = "plot for [i in title_list] i.'.csv' using {:d}:{:d} pt 7 ps 1 title i".format(C_ELAPSED, C_FREQ) + g_plot('title_list = "{}"'.format(title_list)) + g_plot(plot_str) + +def plot_duration_cpu(): + """ Plot all cpu durations """ + + output_png = 'all_cpu_durations.png' + g_plot = common_all_gnuplot_settings(output_png) +# autoscale this one, no set y range + g_plot('set ylabel "Timer Duration (MilliSeconds)"') + g_plot('set title "{} : cpu durations : {:%F %H:%M}"'.format(testname, datetime.now())) + + title_list = subprocess.check_output('ls cpu???.csv | sed -e \'s/.csv//\'',shell=True).decode('utf-8').replace('\n', ' ') + plot_str = "plot for [i in title_list] i.'.csv' using {:d}:{:d} pt 7 ps 1 title i".format(C_ELAPSED, C_DURATION) + g_plot('title_list = "{}"'.format(title_list)) + g_plot(plot_str) + +def plot_scaled_cpu(): + """ Plot all cpu scaled busy """ + + output_png = 'all_cpu_scaled.png' + g_plot = common_all_gnuplot_settings(output_png) +# autoscale this one, no set y range + g_plot('set ylabel "Scaled Busy (Unitless)"') + g_plot('set title "{} : cpu scaled busy : {:%F %H:%M}"'.format(testname, datetime.now())) + + title_list = subprocess.check_output('ls cpu???.csv | sed -e \'s/.csv//\'',shell=True).decode('utf-8').replace('\n', ' ') + plot_str = "plot for [i in title_list] i.'.csv' using {:d}:{:d} pt 7 ps 1 title i".format(C_ELAPSED, C_SCALED) + g_plot('title_list = "{}"'.format(title_list)) + g_plot(plot_str) + +def plot_boost_cpu(): + """ Plot all cpu IO Boosts """ + + output_png = 'all_cpu_boost.png' + g_plot = common_all_gnuplot_settings(output_png) + g_plot('set yrange [0:100]') + g_plot('set ylabel "CPU IO Boost (percent)"') + g_plot('set title "{} : cpu io boost : {:%F %H:%M}"'.format(testname, datetime.now())) + + title_list = subprocess.check_output('ls cpu???.csv | sed -e \'s/.csv//\'',shell=True).decode('utf-8').replace('\n', ' ') + plot_str = "plot for [i in title_list] i.'.csv' using {:d}:{:d} pt 7 ps 1 title i".format(C_ELAPSED, C_BOOST) + g_plot('title_list = "{}"'.format(title_list)) + g_plot(plot_str) + +def plot_ghz_cpu(): + """ Plot all cpu tsc ghz """ + + output_png = 'all_cpu_ghz.png' + g_plot = common_all_gnuplot_settings(output_png) +# autoscale this one, no set y range + g_plot('set ylabel "TSC Frequency (GHz)"') + g_plot('set title "{} : cpu TSC Frequencies (Sanity check calculation) : {:%F %H:%M}"'.format(testname, datetime.now())) + + title_list = subprocess.check_output('ls cpu???.csv | sed -e \'s/.csv//\'',shell=True).decode('utf-8').replace('\n', ' ') + plot_str = "plot for [i in title_list] i.'.csv' using {:d}:{:d} pt 7 ps 1 title i".format(C_ELAPSED, C_GHZ) + g_plot('title_list = "{}"'.format(title_list)) + g_plot(plot_str) + +def common_all_gnuplot_settings(output_png): + """ common gnuplot settings for multiple CPUs one one graph. """ + + g_plot = common_gnuplot_settings() + g_plot('set output "' + output_png + '"') + return(g_plot) + +def common_gnuplot_settings(): + """ common gnuplot settings. """ + + g_plot = Gnuplot.Gnuplot(persist=1) +# The following line is for rigor only. It seems to be assumed for .csv files + g_plot('set datafile separator \",\"') + g_plot('set ytics nomirror') + g_plot('set xtics nomirror') + g_plot('set xtics font ", 10"') + g_plot('set ytics font ", 10"') + g_plot('set tics out scale 1.0') + g_plot('set grid') + g_plot('set key out horiz') + g_plot('set key bot center') + g_plot('set key samplen 2 spacing .8 font ", 9"') + g_plot('set term png size 1200, 600') + g_plot('set title font ", 11"') + g_plot('set ylabel font ", 10"') + g_plot('set xlabel font ", 10"') + g_plot('set xlabel offset 0, 0.5') + g_plot('set xlabel "Elapsed Time (Seconds)"') + return(g_plot) + +def set_4_plot_linestyles(g_plot): + """ set the linestyles used for 4 plots in 1 graphs. """ + + g_plot('set style line 1 linetype 1 linecolor rgb "green" pointtype -1') + g_plot('set style line 2 linetype 1 linecolor rgb "red" pointtype -1') + g_plot('set style line 3 linetype 1 linecolor rgb "purple" pointtype -1') + g_plot('set style line 4 linetype 1 linecolor rgb "blue" pointtype -1') + +def store_csv(cpu_int, time_pre_dec, time_post_dec, core_busy, scaled, _from, _to, mperf, aperf, tsc, freq_ghz, io_boost, common_comm, load, duration_ms, sample_num, elapsed_time, tsc_ghz): + """ Store master csv file information """ + + global graph_data_present + + if cpu_mask[cpu_int] == 0: + return + + try: + f_handle = open('cpu.csv', 'a') + string_buffer = "CPU_%03u, %05u, %06u, %u, %u, %u, %u, %u, %u, %u, %.4f, %u, %.2f, %.3f, %u, %.3f, %.3f, %s\n" % (cpu_int, int(time_pre_dec), int(time_post_dec), int(core_busy), int(scaled), int(_from), int(_to), int(mperf), int(aperf), int(tsc), freq_ghz, int(io_boost), load, duration_ms, sample_num, elapsed_time, tsc_ghz, common_comm) + f_handle.write(string_buffer); + f_handle.close() + except: + print('IO error cpu.csv') + return + + graph_data_present = True; + +def split_csv(): + """ seperate the all csv file into per CPU csv files. """ + + global current_max_cpu + + if os.path.exists('cpu.csv'): + for index in range(0, current_max_cpu + 1): + if cpu_mask[int(index)] != 0: + os.system('grep -m 1 common_cpu cpu.csv > cpu{:0>3}.csv'.format(index)) + os.system('grep CPU_{:0>3} cpu.csv >> cpu{:0>3}.csv'.format(index, index)) + +def fix_ownership(path): + """Change the owner of the file to SUDO_UID, if required""" + + uid = os.environ.get('SUDO_UID') + gid = os.environ.get('SUDO_GID') + if uid is not None: + os.chown(path, int(uid), int(gid)) + +def cleanup_data_files(): + """ clean up existing data files """ + + if os.path.exists('cpu.csv'): + os.remove('cpu.csv') + f_handle = open('cpu.csv', 'a') + f_handle.write('common_cpu, common_secs, common_usecs, core_busy, scaled_busy, from, to, mperf, aperf, tsc, freq, boost, load, duration_ms, sample_num, elapsed_time, tsc_ghz, common_comm') + f_handle.write('\n') + f_handle.close() + +def clear_trace_file(): + """ Clear trace file """ + + try: + f_handle = open('/sys/kernel/debug/tracing/trace', 'w') + f_handle.close() + except: + print('IO error clearing trace file ') + sys.exit(2) + +def enable_trace(): + """ Enable trace """ + + try: + open('/sys/kernel/debug/tracing/events/power/pstate_sample/enable' + , 'w').write("1") + except: + print('IO error enabling trace ') + sys.exit(2) + +def disable_trace(): + """ Disable trace """ + + try: + open('/sys/kernel/debug/tracing/events/power/pstate_sample/enable' + , 'w').write("0") + except: + print('IO error disabling trace ') + sys.exit(2) + +def set_trace_buffer_size(): + """ Set trace buffer size """ + + try: + with open('/sys/kernel/debug/tracing/buffer_size_kb', 'w') as fp: + fp.write(memory) + except: + print('IO error setting trace buffer size ') + sys.exit(2) + +def free_trace_buffer(): + """ Free the trace buffer memory """ + + try: + open('/sys/kernel/debug/tracing/buffer_size_kb' + , 'w').write("1") + except: + print('IO error freeing trace buffer ') + sys.exit(2) + +def read_trace_data(filename): + """ Read and parse trace data """ + + global current_max_cpu + global sample_num, last_sec_cpu, last_usec_cpu, start_time + + try: + data = open(filename, 'r').read() + except: + print('Error opening ', filename) + sys.exit(2) + + for line in data.splitlines(): + search_obj = \ + re.search(r'(^(.*?)\[)((\d+)[^\]])(.*?)(\d+)([.])(\d+)(.*?core_busy=)(\d+)(.*?scaled=)(\d+)(.*?from=)(\d+)(.*?to=)(\d+)(.*?mperf=)(\d+)(.*?aperf=)(\d+)(.*?tsc=)(\d+)(.*?freq=)(\d+)' + , line) + + if search_obj: + cpu = search_obj.group(3) + cpu_int = int(cpu) + cpu = str(cpu_int) + + time_pre_dec = search_obj.group(6) + time_post_dec = search_obj.group(8) + core_busy = search_obj.group(10) + scaled = search_obj.group(12) + _from = search_obj.group(14) + _to = search_obj.group(16) + mperf = search_obj.group(18) + aperf = search_obj.group(20) + tsc = search_obj.group(22) + freq = search_obj.group(24) + common_comm = search_obj.group(2).replace(' ', '') + + # Not all kernel versions have io_boost field + io_boost = '0' + search_obj = re.search(r'.*?io_boost=(\d+)', line) + if search_obj: + io_boost = search_obj.group(1) + + if sample_num == 0 : + start_time = Decimal(time_pre_dec) + Decimal(time_post_dec) / Decimal(1000000) + sample_num += 1 + + if last_sec_cpu[cpu_int] == 0 : + last_sec_cpu[cpu_int] = time_pre_dec + last_usec_cpu[cpu_int] = time_post_dec + else : + duration_us = (int(time_pre_dec) - int(last_sec_cpu[cpu_int])) * 1000000 + (int(time_post_dec) - int(last_usec_cpu[cpu_int])) + duration_ms = Decimal(duration_us) / Decimal(1000) + last_sec_cpu[cpu_int] = time_pre_dec + last_usec_cpu[cpu_int] = time_post_dec + elapsed_time = Decimal(time_pre_dec) + Decimal(time_post_dec) / Decimal(1000000) - start_time + load = Decimal(int(mperf)*100)/ Decimal(tsc) + freq_ghz = Decimal(freq)/Decimal(1000000) +# Sanity check calculation, typically anomalies indicate missed samples +# However, check for 0 (should never occur) + tsc_ghz = Decimal(0) + if duration_ms != Decimal(0) : + tsc_ghz = Decimal(tsc)/duration_ms/Decimal(1000000) + store_csv(cpu_int, time_pre_dec, time_post_dec, core_busy, scaled, _from, _to, mperf, aperf, tsc, freq_ghz, io_boost, common_comm, load, duration_ms, sample_num, elapsed_time, tsc_ghz) + + if cpu_int > current_max_cpu: + current_max_cpu = cpu_int +# End of for each trace line loop +# Now seperate the main overall csv file into per CPU csv files. + split_csv() + +def signal_handler(signal, frame): + print(' SIGINT: Forcing cleanup before exit.') + if interval: + disable_trace() + clear_trace_file() + # Free the memory + free_trace_buffer() + sys.exit(0) + +signal.signal(signal.SIGINT, signal_handler) + +interval = "" +filename = "" +cpu_list = "" +testname = "" +memory = "10240" +graph_data_present = False; + +valid1 = False +valid2 = False + +cpu_mask = zeros((MAX_CPUS,), dtype=int) + +try: + opts, args = getopt.getopt(sys.argv[1:],"ht:i:c:n:m:",["help","trace_file=","interval=","cpu=","name=","memory="]) +except getopt.GetoptError: + print_help() + sys.exit(2) +for opt, arg in opts: + if opt == '-h': + print() + sys.exit() + elif opt in ("-t", "--trace_file"): + valid1 = True + location = os.path.realpath(os.path.join(os.getcwd(), os.path.dirname(__file__))) + filename = os.path.join(location, arg) + elif opt in ("-i", "--interval"): + valid1 = True + interval = arg + elif opt in ("-c", "--cpu"): + cpu_list = arg + elif opt in ("-n", "--name"): + valid2 = True + testname = arg + elif opt in ("-m", "--memory"): + memory = arg + +if not (valid1 and valid2): + print_help() + sys.exit() + +if cpu_list: + for p in re.split("[,]", cpu_list): + if int(p) < MAX_CPUS : + cpu_mask[int(p)] = 1 +else: + for i in range (0, MAX_CPUS): + cpu_mask[i] = 1 + +if not os.path.exists('results'): + os.mkdir('results') + # The regular user needs to own the directory, not root. + fix_ownership('results') + +os.chdir('results') +if os.path.exists(testname): + print('The test name directory already exists. Please provide a unique test name. Test re-run not supported, yet.') + sys.exit() +os.mkdir(testname) +# The regular user needs to own the directory, not root. +fix_ownership(testname) +os.chdir(testname) + +# Temporary (or perhaps not) +cur_version = sys.version_info +print('python version (should be >= 2.7):') +print(cur_version) + +# Left as "cleanup" for potential future re-run ability. +cleanup_data_files() + +if interval: + filename = "/sys/kernel/debug/tracing/trace" + clear_trace_file() + set_trace_buffer_size() + enable_trace() + print('Sleeping for ', interval, 'seconds') + time.sleep(int(interval)) + disable_trace() + +current_max_cpu = 0 + +read_trace_data(filename) + +if interval: + clear_trace_file() + # Free the memory + free_trace_buffer() + +if graph_data_present == False: + print('No valid data to plot') + sys.exit(2) + +for cpu_no in range(0, current_max_cpu + 1): + plot_perf_busy_with_sample(cpu_no) + plot_perf_busy(cpu_no) + plot_durations(cpu_no) + plot_loads(cpu_no) + +plot_pstate_cpu_with_sample() +plot_pstate_cpu() +plot_load_cpu() +plot_frequency_cpu() +plot_duration_cpu() +plot_scaled_cpu() +plot_boost_cpu() +plot_ghz_cpu() + +# It is preferrable, but not necessary, that the regular user owns the files, not root. +for root, dirs, files in os.walk('.'): + for f in files: + fix_ownership(f) + +os.chdir('../../') diff --git a/tools/power/x86/turbostat/.gitignore b/tools/power/x86/turbostat/.gitignore new file mode 100644 index 000000000..e13109b43 --- /dev/null +++ b/tools/power/x86/turbostat/.gitignore @@ -0,0 +1,2 @@ +# SPDX-License-Identifier: GPL-2.0-only +turbostat diff --git a/tools/power/x86/turbostat/Makefile b/tools/power/x86/turbostat/Makefile new file mode 100644 index 000000000..f3e3c94ab --- /dev/null +++ b/tools/power/x86/turbostat/Makefile @@ -0,0 +1,30 @@ +# SPDX-License-Identifier: GPL-2.0 +CC = $(CROSS_COMPILE)gcc +BUILD_OUTPUT := $(CURDIR) +PREFIX ?= /usr +DESTDIR ?= + +ifeq ("$(origin O)", "command line") + BUILD_OUTPUT := $(O) +endif + +turbostat : turbostat.c +override CFLAGS += -O2 -Wall -I../../../include +override CFLAGS += -DMSRHEADER='"../../../../arch/x86/include/asm/msr-index.h"' +override CFLAGS += -DINTEL_FAMILY_HEADER='"../../../../arch/x86/include/asm/intel-family.h"' +override CFLAGS += -D_FILE_OFFSET_BITS=64 +override CFLAGS += -D_FORTIFY_SOURCE=2 + +%: %.c + @mkdir -p $(BUILD_OUTPUT) + $(CC) $(CFLAGS) $< -o $(BUILD_OUTPUT)/$@ $(LDFLAGS) -lcap -lrt + +.PHONY : clean +clean : + @rm -f $(BUILD_OUTPUT)/turbostat + +install : turbostat + install -d $(DESTDIR)$(PREFIX)/bin + install $(BUILD_OUTPUT)/turbostat $(DESTDIR)$(PREFIX)/bin/turbostat + install -d $(DESTDIR)$(PREFIX)/share/man/man8 + install -m 644 turbostat.8 $(DESTDIR)$(PREFIX)/share/man/man8 diff --git a/tools/power/x86/turbostat/turbostat.8 b/tools/power/x86/turbostat/turbostat.8 new file mode 100644 index 000000000..71e3f3a68 --- /dev/null +++ b/tools/power/x86/turbostat/turbostat.8 @@ -0,0 +1,353 @@ +.TH TURBOSTAT 8 +.SH NAME +turbostat \- Report processor frequency and idle statistics +.SH SYNOPSIS +.ft B +.B turbostat +.RB [ Options ] +.RB command +.br +.B turbostat +.RB [ Options ] +.RB [ "\--interval seconds" ] +.SH DESCRIPTION +\fBturbostat \fP reports processor topology, frequency, +idle power-state statistics, temperature and power on X86 processors. +There are two ways to invoke turbostat. +The first method is to supply a +\fBcommand\fP, which is forked and statistics are printed +in one-shot upon its completion. +The second method is to omit the command, +and turbostat displays statistics every 5 seconds interval. +The 5-second interval can be changed using the --interval option. +.PP +Some information is not available on older processors. +.SS Options +Options can be specified with a single or double '-', and only as much of the option +name as necessary to disambiguate it from others is necessary. Note that options are case-sensitive. +.PP +\fB--add attributes\fP add column with counter having specified 'attributes'. The 'location' attribute is required, all others are optional. +.nf + location: {\fBmsrDDD\fP | \fBmsr0xXXX\fP | \fB/sys/path...\fP} + msrDDD is a decimal offset, eg. msr16 + msr0xXXX is a hex offset, eg. msr0x10 + /sys/path... is an absolute path to a sysfs attribute + + scope: {\fBcpu\fP | \fBcore\fP | \fBpackage\fP} + sample and print the counter for every cpu, core, or package. + default: cpu + + size: {\fBu32\fP | \fBu64\fP } + MSRs are read as 64-bits, u32 truncates the displayed value to 32-bits. + default: u64 + + format: {\fBraw\fP | \fBdelta\fP | \fBpercent\fP} + 'raw' shows the MSR contents in hex. + 'delta' shows the difference in values during the measurement interval. + 'percent' shows the delta as a percentage of the cycles elapsed. + default: delta + + name: "name_string" + Any string that does not match a key-word above is used + as the column header. +.fi +.PP +\fB--cpu cpu-set\fP limit output to system summary plus the specified cpu-set. If cpu-set is the string "core", then the system summary plus the first CPU in each core are printed -- eg. subsequent HT siblings are not printed. Or if cpu-set is the string "package", then the system summary plus the first CPU in each package is printed. Otherwise, the system summary plus the specified set of CPUs are printed. The cpu-set is ordered from low to high, comma delimited with ".." and "-" permitted to denote a range. eg. 1,2,8,14..17,21-44 +.PP +\fB--hide column\fP do not show the specified built-in columns. May be invoked multiple times, or with a comma-separated list of column names. Use "--hide sysfs" to hide the sysfs statistics columns as a group. +.PP +\fB--enable column\fP show the specified built-in columns, which are otherwise disabled, by default. Currently the only built-in counters disabled by default are "usec", "Time_Of_Day_Seconds", "APIC" and "X2APIC". +The column name "all" can be used to enable all disabled-by-default built-in counters. +.PP +\fB--show column\fP show only the specified built-in columns. May be invoked multiple times, or with a comma-separated list of column names. Use "--show sysfs" to show the sysfs statistics columns as a group. +.PP +\fB--Dump\fP displays the raw counter values. +.PP +\fB--quiet\fP Do not decode and print the system configuration header information. +.PP +\fB--interval seconds\fP overrides the default 5.0 second measurement interval. +.PP +\fB--num_iterations num\fP number of the measurement iterations. +.PP +\fB--out output_file\fP turbostat output is written to the specified output_file. +The file is truncated if it already exists, and it is created if it does not exist. +.PP +\fB--help\fP displays usage for the most common parameters. +.PP +\fB--Joules\fP displays energy in Joules, rather than dividing Joules by time to print power in Watts. +.PP +\fB--list\fP display column header names available for use by --show and --hide, then exit. +.PP +\fB--Summary\fP limits output to a 1-line System Summary for each interval. +.PP +\fB--TCC temperature\fP sets the Thermal Control Circuit temperature for systems which do not export that value. This is used for making sense of the Digital Thermal Sensor outputs, as they return degrees Celsius below the TCC activation temperature. +.PP +\fB--version\fP displays the version. +.PP +The \fBcommand\fP parameter forks \fBcommand\fP, and upon its exit, +displays the statistics gathered since it was forked. +.PP +.SH ROW DESCRIPTIONS +The system configuration dump (if --quiet is not used) is followed by statistics. The first row of the statistics labels the content of each column (below). The second row of statistics is the system summary line. The system summary line has a '-' in the columns for the Package, Core, and CPU. The contents of the system summary line depends on the type of column. Columns that count items (eg. IRQ) show the sum across all CPUs in the system. Columns that show a percentage show the average across all CPUs in the system. Columns that dump raw MSR values simply show 0 in the summary. After the system summary row, each row describes a specific Package/Core/CPU. Note that if the --cpu parameter is used to limit which specific CPUs are displayed, turbostat will still collect statistics for all CPUs in the system and will still show the system summary for all CPUs in the system. +.SH COLUMN DESCRIPTIONS +.nf +\fBusec\fP For each CPU, the number of microseconds elapsed during counter collection, including thread migration -- if any. This counter is disabled by default, and is enabled with "--enable usec", or --debug. On the summary row, usec refers to the total elapsed time to collect the counters on all cpus. +\fBTime_Of_Day_Seconds\fP For each CPU, the gettimeofday(2) value (seconds.subsec since Epoch) when the counters ending the measurement interval were collected. This column is disabled by default, and can be enabled with "--enable Time_Of_Day_Seconds" or "--debug". On the summary row, Time_Of_Day_Seconds refers to the timestamp following collection of counters on the last CPU. +\fBCore\fP processor core number. Note that multiple CPUs per core indicate support for Intel(R) Hyper-Threading Technology (HT). +\fBCPU\fP Linux CPU (logical processor) number. Yes, it is okay that on many systems the CPUs are not listed in numerical order -- for efficiency reasons, turbostat runs in topology order, so HT siblings appear together. +\fBPackage\fP processor package number -- not present on systems with a single processor package. +\fBAvg_MHz\fP number of cycles executed divided by time elapsed. Note that this includes idle-time when 0 instructions are executed. +\fBBusy%\fP percent of the measurement interval that the CPU executes instructions, aka. % of time in "C0" state. +\fBBzy_MHz\fP average clock rate while the CPU was not idle (ie. in "c0" state). +\fBTSC_MHz\fP average MHz that the TSC ran during the entire interval. +\fBIRQ\fP The number of interrupts serviced by that CPU during the measurement interval. The system total line is the sum of interrupts serviced across all CPUs. turbostat parses /proc/interrupts to generate this summary. +\fBSMI\fP The number of System Management Interrupts serviced CPU during the measurement interval. While this counter is actually per-CPU, SMI are triggered on all processors, so the number should be the same for all CPUs. +\fBC1, C2, C3...\fP The number times Linux requested the C1, C2, C3 idle state during the measurement interval. The system summary line shows the sum for all CPUs. These are C-state names as exported in /sys/devices/system/cpu/cpu*/cpuidle/state*/name. While their names are generic, their attributes are processor specific. They the system description section of output shows what MWAIT sub-states they are mapped to on each system. +\fBC1%, C2%, C3%\fP The residency percentage that Linux requested C1, C2, C3.... The system summary is the average of all CPUs in the system. Note that these are software, reflecting what was requested. The hardware counters reflect what was actually achieved. +\fBCPU%c1, CPU%c3, CPU%c6, CPU%c7\fP show the percentage residency in hardware core idle states. These numbers are from hardware residency counters. +\fBCoreTmp\fP Degrees Celsius reported by the per-core Digital Thermal Sensor. +\fBPkgTmp\fP Degrees Celsius reported by the per-package Package Thermal Monitor. +\fBGFX%rc6\fP The percentage of time the GPU is in the "render C6" state, rc6, during the measurement interval. From /sys/class/drm/card0/power/rc6_residency_ms. +\fBGFXMHz\fP Instantaneous snapshot of what sysfs presents at the end of the measurement interval. From /sys/class/graphics/fb0/device/drm/card0/gt_cur_freq_mhz. +\fBPkg%pc2, Pkg%pc3, Pkg%pc6, Pkg%pc7\fP percentage residency in hardware package idle states. These numbers are from hardware residency counters. +\fBPkgWatt\fP Watts consumed by the whole package. +\fBCorWatt\fP Watts consumed by the core part of the package. +\fBGFXWatt\fP Watts consumed by the Graphics part of the package -- available only on client processors. +\fBRAMWatt\fP Watts consumed by the DRAM DIMMS -- available only on server processors. +\fBPKG_%\fP percent of the interval that RAPL throttling was active on the Package. Note that the system summary is the sum of the package throttling time, and thus may be higher than 100% on a multi-package system. Note that the meaning of this field is model specific. For example, some hardware increments this counter when RAPL responds to thermal limits, but does not increment this counter when RAPL responds to power limits. Comparing PkgWatt and PkgTmp to system limits is necessary. +\fBRAM_%\fP percent of the interval that RAPL throttling was active on DRAM. +.fi +.SH TOO MUCH INFORMATION EXAMPLE +By default, turbostat dumps all possible information -- a system configuration header, followed by columns for all counters. +This is ideal for remote debugging, use the "--out" option to save everything to a text file, and get that file to the expert helping you debug. +.PP +When you are not interested in all that information, and there are several ways to see only what you want. First the "--quiet" option will skip the configuration information, and turbostat will show only the counter columns. Second, you can reduce the columns with the "--hide" and "--show" options. If you use the "--show" option, then turbostat will show only the columns you list. If you use the "--hide" option, turbostat will show all columns, except the ones you list. +.PP +To find out what columns are available for --show and --hide, the "--list" option is available. For convenience, the special strings "sysfs" can be used to refer to all of the sysfs C-state counters at once: +.nf +sudo ./turbostat --show sysfs --quiet sleep 10 +10.003837 sec + C1 C1E C3 C6 C7s C1% C1E% C3% C6% C7s% + 4 21 2 2 459 0.14 0.82 0.00 0.00 98.93 + 1 17 2 2 130 0.00 0.02 0.00 0.00 99.80 + 0 0 0 0 31 0.00 0.00 0.00 0.00 99.95 + 2 1 0 0 52 1.14 6.49 0.00 0.00 92.21 + 1 2 0 0 52 0.00 0.08 0.00 0.00 99.86 + 0 0 0 0 71 0.00 0.00 0.00 0.00 99.89 + 0 0 0 0 25 0.00 0.00 0.00 0.00 99.96 + 0 0 0 0 74 0.00 0.00 0.00 0.00 99.94 + 0 1 0 0 24 0.00 0.00 0.00 0.00 99.84 +.fi +.PP +.SH ONE SHOT COMMAND EXAMPLE +If turbostat is invoked with a command, it will fork that command +and output the statistics gathered after the command exits. +In this case, turbostat output goes to stderr, by default. +Output can instead be saved to a file using the --out option. +In this example, the "sleep 10" command is forked, and turbostat waits for it to complete before saving all statistics into "ts.out". Note that "sleep 10" is not part of turbostat, but is simply an example of a command that turbostat can fork. The "ts.out" file is what you want to edit in a very wide window, paste into a spreadsheet, or attach to a bugzilla entry. + +.nf +[root@hsw]# ./turbostat -o ts.out sleep 10 +[root@hsw]# +.fi + +.SH PERIODIC INTERVAL EXAMPLE +Without a command to fork, turbostat displays statistics ever 5 seconds. +Periodic output goes to stdout, by default, unless --out is used to specify an output file. +The 5-second interval can be changed with the "-i sec" option. +.nf +sudo ./turbostat --quiet --hide sysfs,IRQ,SMI,CoreTmp,PkgTmp,GFX%rc6,GFXMHz,PkgWatt,CorWatt,GFXWatt + Core CPU Avg_MHz Busy% Bzy_MHz TSC_MHz CPU%c1 CPU%c3 CPU%c6 CPU%c7 + - - 488 12.52 3900 3498 12.50 0.00 0.00 74.98 + 0 0 5 0.13 3900 3498 99.87 0.00 0.00 0.00 + 0 4 3897 99.99 3900 3498 0.01 + 1 1 0 0.00 3856 3498 0.01 0.00 0.00 99.98 + 1 5 0 0.00 3861 3498 0.01 + 2 2 1 0.02 3889 3498 0.03 0.00 0.00 99.95 + 2 6 0 0.00 3863 3498 0.05 + 3 3 0 0.01 3869 3498 0.02 0.00 0.00 99.97 + 3 7 0 0.00 3878 3498 0.03 + Core CPU Avg_MHz Busy% Bzy_MHz TSC_MHz CPU%c1 CPU%c3 CPU%c6 CPU%c7 + - - 491 12.59 3900 3498 12.42 0.00 0.00 74.99 + 0 0 27 0.69 3900 3498 99.31 0.00 0.00 0.00 + 0 4 3898 99.99 3900 3498 0.01 + 1 1 0 0.00 3883 3498 0.01 0.00 0.00 99.99 + 1 5 0 0.00 3898 3498 0.01 + 2 2 0 0.01 3889 3498 0.02 0.00 0.00 99.98 + 2 6 0 0.00 3889 3498 0.02 + 3 3 0 0.00 3856 3498 0.01 0.00 0.00 99.99 + 3 7 0 0.00 3897 3498 0.01 +.fi +This example also shows the use of the --hide option to skip columns that are not wanted. +Note that cpu4 in this example is 99.99% busy, while the other CPUs are all under 1% busy. +Notice that cpu4's HT sibling is cpu0, which is under 1% busy, but can get into CPU%c1 only, +because its cpu4's activity on shared hardware keeps it from entering a deeper C-state. + +.SH SYSTEM CONFIGURATION INFORMATION EXAMPLE + +By default, turbostat always dumps system configuration information +before taking measurements. In the example above, "--quiet" is used +to suppress that output. Here is an example of the configuration information: +.nf +turbostat version 2017.02.15 - Len Brown <lenb@kernel.org> +CPUID(0): GenuineIntel 13 CPUID levels; family:model:stepping 0x6:3c:3 (6:60:3) +CPUID(1): SSE3 MONITOR - EIST TM2 TSC MSR ACPI-TM TM +CPUID(6): APERF, TURBO, DTS, PTM, No-HWP, No-HWPnotify, No-HWPwindow, No-HWPepp, No-HWPpkg, EPB +cpu4: MSR_IA32_MISC_ENABLE: 0x00850089 (TCC EIST No-MWAIT PREFETCH TURBO) +CPUID(7): No-SGX +cpu4: MSR_MISC_PWR_MGMT: 0x00400000 (ENable-EIST_Coordination DISable-EPB DISable-OOB) +RAPL: 3121 sec. Joule Counter Range, at 84 Watts +cpu4: MSR_PLATFORM_INFO: 0x80838f3012300 +8 * 100.0 = 800.0 MHz max efficiency frequency +35 * 100.0 = 3500.0 MHz base frequency +cpu4: MSR_IA32_POWER_CTL: 0x0004005d (C1E auto-promotion: DISabled) +cpu4: MSR_TURBO_RATIO_LIMIT: 0x25262727 +37 * 100.0 = 3700.0 MHz max turbo 4 active cores +38 * 100.0 = 3800.0 MHz max turbo 3 active cores +39 * 100.0 = 3900.0 MHz max turbo 2 active cores +39 * 100.0 = 3900.0 MHz max turbo 1 active cores +cpu4: MSR_CONFIG_TDP_NOMINAL: 0x00000023 (base_ratio=35) +cpu4: MSR_CONFIG_TDP_LEVEL_1: 0x00000000 () +cpu4: MSR_CONFIG_TDP_LEVEL_2: 0x00000000 () +cpu4: MSR_CONFIG_TDP_CONTROL: 0x80000000 ( lock=1) +cpu4: MSR_TURBO_ACTIVATION_RATIO: 0x00000000 (MAX_NON_TURBO_RATIO=0 lock=0) +cpu4: MSR_PKG_CST_CONFIG_CONTROL: 0x1e000400 (UNdemote-C3, UNdemote-C1, demote-C3, demote-C1, UNlocked: pkg-cstate-limit=0: pc0) +cpu4: POLL: CPUIDLE CORE POLL IDLE +cpu4: C1: MWAIT 0x00 +cpu4: C1E: MWAIT 0x01 +cpu4: C3: MWAIT 0x10 +cpu4: C6: MWAIT 0x20 +cpu4: C7s: MWAIT 0x32 +cpu4: MSR_MISC_FEATURE_CONTROL: 0x00000000 (L2-Prefetch L2-Prefetch-pair L1-Prefetch L1-IP-Prefetch) +cpu0: MSR_IA32_ENERGY_PERF_BIAS: 0x00000006 (balanced) +cpu0: MSR_CORE_PERF_LIMIT_REASONS, 0x31200000 (Active: ) (Logged: Transitions, MultiCoreTurbo, Amps, Auto-HWP, ) +cpu0: MSR_GFX_PERF_LIMIT_REASONS, 0x00000000 (Active: ) (Logged: ) +cpu0: MSR_RING_PERF_LIMIT_REASONS, 0x0d000000 (Active: ) (Logged: Amps, PkgPwrL1, PkgPwrL2, ) +cpu0: MSR_RAPL_POWER_UNIT: 0x000a0e03 (0.125000 Watts, 0.000061 Joules, 0.000977 sec.) +cpu0: MSR_PKG_POWER_INFO: 0x000002a0 (84 W TDP, RAPL 0 - 0 W, 0.000000 sec.) +cpu0: MSR_PKG_POWER_LIMIT: 0x428348001a82a0 (UNlocked) +cpu0: PKG Limit #1: ENabled (84.000000 Watts, 8.000000 sec, clamp DISabled) +cpu0: PKG Limit #2: ENabled (105.000000 Watts, 0.002441* sec, clamp DISabled) +cpu0: MSR_PP0_POLICY: 0 +cpu0: MSR_PP0_POWER_LIMIT: 0x00000000 (UNlocked) +cpu0: Cores Limit: DISabled (0.000000 Watts, 0.000977 sec, clamp DISabled) +cpu0: MSR_PP1_POLICY: 0 +cpu0: MSR_PP1_POWER_LIMIT: 0x00000000 (UNlocked) +cpu0: GFX Limit: DISabled (0.000000 Watts, 0.000977 sec, clamp DISabled) +cpu0: MSR_IA32_TEMPERATURE_TARGET: 0x00641400 (100 C) +cpu0: MSR_IA32_PACKAGE_THERM_STATUS: 0x884c0800 (24 C) +cpu0: MSR_IA32_THERM_STATUS: 0x884c0000 (24 C +/- 1) +cpu1: MSR_IA32_THERM_STATUS: 0x88510000 (19 C +/- 1) +cpu2: MSR_IA32_THERM_STATUS: 0x884e0000 (22 C +/- 1) +cpu3: MSR_IA32_THERM_STATUS: 0x88510000 (19 C +/- 1) +cpu4: MSR_PKGC3_IRTL: 0x00008842 (valid, 67584 ns) +cpu4: MSR_PKGC6_IRTL: 0x00008873 (valid, 117760 ns) +cpu4: MSR_PKGC7_IRTL: 0x00008891 (valid, 148480 ns) +.fi +The \fBmax efficiency\fP frequency, a.k.a. Low Frequency Mode, is the frequency +available at the minimum package voltage. The \fBTSC frequency\fP is the base +frequency of the processor -- this should match the brand string +in /proc/cpuinfo. This base frequency +should be sustainable on all CPUs indefinitely, given nominal power and cooling. +The remaining rows show what maximum turbo frequency is possible +depending on the number of idle cores. Note that not all information is +available on all processors. +.SH ADD COUNTER EXAMPLE +Here we limit turbostat to showing just the CPU number for cpu0 - cpu3. +We add a counter showing the 32-bit raw value of MSR 0x199 (MSR_IA32_PERF_CTL), +labeling it with the column header, "PRF_CTRL", and display it only once, +afte the conclusion of a 0.1 second sleep. +.nf +sudo ./turbostat --quiet --cpu 0-3 --show CPU --add msr0x199,u32,raw,PRF_CTRL sleep .1 +0.101604 sec +CPU PRF_CTRL +- 0x00000000 +0 0x00000c00 +1 0x00000800 +2 0x00000a00 +3 0x00000800 + +.fi + +.SH INPUT + +For interval-mode, turbostat will immediately end the current interval +when it sees a newline on standard input. +turbostat will then start the next interval. +Control-C will be send a SIGINT to turbostat, +which will immediately abort the program with no further processing. +.SH SIGNALS + +SIGINT will interrupt interval-mode. +The end-of-interval data will be collected and displayed before turbostat exits. + +SIGUSR1 will end current interval, +end-of-interval data will be collected and displayed before turbostat +starts a new interval. +.SH NOTES + +.B "turbostat " +must be run as root. +Alternatively, non-root users can be enabled to run turbostat this way: + +# setcap cap_sys_rawio=ep ./turbostat + +# chmod +r /dev/cpu/*/msr + +# chmod +r /dev/cpu_dma_latency + +.B "turbostat " +reads hardware counters, but doesn't write them. +So it will not interfere with the OS or other programs, including +multiple invocations of itself. + +\fBturbostat \fP +may work poorly on Linux-2.6.20 through 2.6.29, +as \fBacpi-cpufreq \fPperiodically cleared the APERF and MPERF MSRs +in those kernels. + +AVG_MHz = APERF_delta/measurement_interval. This is the actual +number of elapsed cycles divided by the entire sample interval -- +including idle time. Note that this calculation is resilient +to systems lacking a non-stop TSC. + +TSC_MHz = TSC_delta/measurement_interval. +On a system with an invariant TSC, this value will be constant +and will closely match the base frequency value shown +in the brand string in /proc/cpuinfo. On a system where +the TSC stops in idle, TSC_MHz will drop +below the processor's base frequency. + +Busy% = MPERF_delta/TSC_delta + +Bzy_MHz = TSC_delta/APERF_delta/MPERF_delta/measurement_interval + +Note that these calculations depend on TSC_delta, so they +are not reliable during intervals when TSC_MHz is not running at the base frequency. + +Turbostat data collection is not atomic. +Extremely short measurement intervals (much less than 1 second), +or system activity that prevents turbostat from being able +to run on all CPUS to quickly collect data, will result in +inconsistent results. + +The APERF, MPERF MSRs are defined to count non-halted cycles. +Although it is not guaranteed by the architecture, turbostat assumes +that they count at TSC rate, which is true on all processors tested to date. + +.SH REFERENCES +Volume 3B: System Programming Guide" +https://www.intel.com/products/processor/manuals/ + +.SH FILES +.ta +.nf +/dev/cpu/*/msr +.fi + +.SH "SEE ALSO" +msr(4), vmstat(8) +.PP +.SH AUTHOR +.nf +Written by Len Brown <len.brown@intel.com> diff --git a/tools/power/x86/turbostat/turbostat.c b/tools/power/x86/turbostat/turbostat.c new file mode 100644 index 000000000..9d4a249cc --- /dev/null +++ b/tools/power/x86/turbostat/turbostat.c @@ -0,0 +1,6217 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * turbostat -- show CPU frequency and C-state residency + * on modern Intel and AMD processors. + * + * Copyright (c) 2013 Intel Corporation. + * Len Brown <len.brown@intel.com> + */ + +#define _GNU_SOURCE +#include MSRHEADER +#include INTEL_FAMILY_HEADER +#include <stdarg.h> +#include <stdio.h> +#include <err.h> +#include <unistd.h> +#include <sys/types.h> +#include <sys/wait.h> +#include <sys/stat.h> +#include <sys/select.h> +#include <sys/resource.h> +#include <fcntl.h> +#include <signal.h> +#include <sys/time.h> +#include <stdlib.h> +#include <getopt.h> +#include <dirent.h> +#include <string.h> +#include <ctype.h> +#include <sched.h> +#include <time.h> +#include <cpuid.h> +#include <sys/capability.h> +#include <errno.h> +#include <math.h> + +char *proc_stat = "/proc/stat"; +FILE *outf; +int *fd_percpu; +struct timeval interval_tv = {5, 0}; +struct timespec interval_ts = {5, 0}; +unsigned int num_iterations; +unsigned int debug; +unsigned int quiet; +unsigned int shown; +unsigned int sums_need_wide_columns; +unsigned int rapl_joules; +unsigned int summary_only; +unsigned int list_header_only; +unsigned int dump_only; +unsigned int do_snb_cstates; +unsigned int do_knl_cstates; +unsigned int do_slm_cstates; +unsigned int use_c1_residency_msr; +unsigned int has_aperf; +unsigned int has_epb; +unsigned int do_irtl_snb; +unsigned int do_irtl_hsw; +unsigned int units = 1000000; /* MHz etc */ +unsigned int genuine_intel; +unsigned int authentic_amd; +unsigned int hygon_genuine; +unsigned int max_level, max_extended_level; +unsigned int has_invariant_tsc; +unsigned int do_nhm_platform_info; +unsigned int no_MSR_MISC_PWR_MGMT; +unsigned int aperf_mperf_multiplier = 1; +double bclk; +double base_hz; +unsigned int has_base_hz; +double tsc_tweak = 1.0; +unsigned int show_pkg_only; +unsigned int show_core_only; +char *output_buffer, *outp; +unsigned int do_rapl; +unsigned int do_dts; +unsigned int do_ptm; +unsigned long long gfx_cur_rc6_ms; +unsigned long long cpuidle_cur_cpu_lpi_us; +unsigned long long cpuidle_cur_sys_lpi_us; +unsigned int gfx_cur_mhz; +unsigned int gfx_act_mhz; +unsigned int tcc_activation_temp; +unsigned int tcc_activation_temp_override; +double rapl_power_units, rapl_time_units; +double rapl_dram_energy_units, rapl_energy_units; +double rapl_joule_counter_range; +unsigned int do_core_perf_limit_reasons; +unsigned int has_automatic_cstate_conversion; +unsigned int do_gfx_perf_limit_reasons; +unsigned int do_ring_perf_limit_reasons; +unsigned int crystal_hz; +unsigned long long tsc_hz; +int base_cpu; +double discover_bclk(unsigned int family, unsigned int model); +unsigned int has_hwp; /* IA32_PM_ENABLE, IA32_HWP_CAPABILITIES */ + /* IA32_HWP_REQUEST, IA32_HWP_STATUS */ +unsigned int has_hwp_notify; /* IA32_HWP_INTERRUPT */ +unsigned int has_hwp_activity_window; /* IA32_HWP_REQUEST[bits 41:32] */ +unsigned int has_hwp_epp; /* IA32_HWP_REQUEST[bits 31:24] */ +unsigned int has_hwp_pkg; /* IA32_HWP_REQUEST_PKG */ +unsigned int has_misc_feature_control; +unsigned int first_counter_read = 1; +int ignore_stdin; + +#define RAPL_PKG (1 << 0) + /* 0x610 MSR_PKG_POWER_LIMIT */ + /* 0x611 MSR_PKG_ENERGY_STATUS */ +#define RAPL_PKG_PERF_STATUS (1 << 1) + /* 0x613 MSR_PKG_PERF_STATUS */ +#define RAPL_PKG_POWER_INFO (1 << 2) + /* 0x614 MSR_PKG_POWER_INFO */ + +#define RAPL_DRAM (1 << 3) + /* 0x618 MSR_DRAM_POWER_LIMIT */ + /* 0x619 MSR_DRAM_ENERGY_STATUS */ +#define RAPL_DRAM_PERF_STATUS (1 << 4) + /* 0x61b MSR_DRAM_PERF_STATUS */ +#define RAPL_DRAM_POWER_INFO (1 << 5) + /* 0x61c MSR_DRAM_POWER_INFO */ + +#define RAPL_CORES_POWER_LIMIT (1 << 6) + /* 0x638 MSR_PP0_POWER_LIMIT */ +#define RAPL_CORE_POLICY (1 << 7) + /* 0x63a MSR_PP0_POLICY */ + +#define RAPL_GFX (1 << 8) + /* 0x640 MSR_PP1_POWER_LIMIT */ + /* 0x641 MSR_PP1_ENERGY_STATUS */ + /* 0x642 MSR_PP1_POLICY */ + +#define RAPL_CORES_ENERGY_STATUS (1 << 9) + /* 0x639 MSR_PP0_ENERGY_STATUS */ +#define RAPL_PER_CORE_ENERGY (1 << 10) + /* Indicates cores energy collection is per-core, + * not per-package. */ +#define RAPL_AMD_F17H (1 << 11) + /* 0xc0010299 MSR_RAPL_PWR_UNIT */ + /* 0xc001029a MSR_CORE_ENERGY_STAT */ + /* 0xc001029b MSR_PKG_ENERGY_STAT */ +#define RAPL_CORES (RAPL_CORES_ENERGY_STATUS | RAPL_CORES_POWER_LIMIT) +#define TJMAX_DEFAULT 100 + +/* MSRs that are not yet in the kernel-provided header. */ +#define MSR_RAPL_PWR_UNIT 0xc0010299 +#define MSR_CORE_ENERGY_STAT 0xc001029a +#define MSR_PKG_ENERGY_STAT 0xc001029b + +#define MAX(a, b) ((a) > (b) ? (a) : (b)) + +/* + * buffer size used by sscanf() for added column names + * Usually truncated to 7 characters, but also handles 18 columns for raw 64-bit counters + */ +#define NAME_BYTES 20 +#define PATH_BYTES 128 + +int backwards_count; +char *progname; + +#define CPU_SUBSET_MAXCPUS 1024 /* need to use before probe... */ +cpu_set_t *cpu_present_set, *cpu_affinity_set, *cpu_subset; +size_t cpu_present_setsize, cpu_affinity_setsize, cpu_subset_size; +#define MAX_ADDED_COUNTERS 8 +#define MAX_ADDED_THREAD_COUNTERS 24 +#define BITMASK_SIZE 32 + +struct thread_data { + struct timeval tv_begin; + struct timeval tv_end; + struct timeval tv_delta; + unsigned long long tsc; + unsigned long long aperf; + unsigned long long mperf; + unsigned long long c1; + unsigned long long irq_count; + unsigned int smi_count; + unsigned int cpu_id; + unsigned int apic_id; + unsigned int x2apic_id; + unsigned int flags; +#define CPU_IS_FIRST_THREAD_IN_CORE 0x2 +#define CPU_IS_FIRST_CORE_IN_PACKAGE 0x4 + unsigned long long counter[MAX_ADDED_THREAD_COUNTERS]; +} *thread_even, *thread_odd; + +struct core_data { + unsigned long long c3; + unsigned long long c6; + unsigned long long c7; + unsigned long long mc6_us; /* duplicate as per-core for now, even though per module */ + unsigned int core_temp_c; + unsigned int core_energy; /* MSR_CORE_ENERGY_STAT */ + unsigned int core_id; + unsigned long long counter[MAX_ADDED_COUNTERS]; +} *core_even, *core_odd; + +struct pkg_data { + unsigned long long pc2; + unsigned long long pc3; + unsigned long long pc6; + unsigned long long pc7; + unsigned long long pc8; + unsigned long long pc9; + unsigned long long pc10; + unsigned long long cpu_lpi; + unsigned long long sys_lpi; + unsigned long long pkg_wtd_core_c0; + unsigned long long pkg_any_core_c0; + unsigned long long pkg_any_gfxe_c0; + unsigned long long pkg_both_core_gfxe_c0; + long long gfx_rc6_ms; + unsigned int gfx_mhz; + unsigned int gfx_act_mhz; + unsigned int package_id; + unsigned long long energy_pkg; /* MSR_PKG_ENERGY_STATUS */ + unsigned long long energy_dram; /* MSR_DRAM_ENERGY_STATUS */ + unsigned long long energy_cores; /* MSR_PP0_ENERGY_STATUS */ + unsigned long long energy_gfx; /* MSR_PP1_ENERGY_STATUS */ + unsigned long long rapl_pkg_perf_status; /* MSR_PKG_PERF_STATUS */ + unsigned long long rapl_dram_perf_status; /* MSR_DRAM_PERF_STATUS */ + unsigned int pkg_temp_c; + unsigned long long counter[MAX_ADDED_COUNTERS]; +} *package_even, *package_odd; + +#define ODD_COUNTERS thread_odd, core_odd, package_odd +#define EVEN_COUNTERS thread_even, core_even, package_even + +#define GET_THREAD(thread_base, thread_no, core_no, node_no, pkg_no) \ + ((thread_base) + \ + ((pkg_no) * \ + topo.nodes_per_pkg * topo.cores_per_node * topo.threads_per_core) + \ + ((node_no) * topo.cores_per_node * topo.threads_per_core) + \ + ((core_no) * topo.threads_per_core) + \ + (thread_no)) + +#define GET_CORE(core_base, core_no, node_no, pkg_no) \ + ((core_base) + \ + ((pkg_no) * topo.nodes_per_pkg * topo.cores_per_node) + \ + ((node_no) * topo.cores_per_node) + \ + (core_no)) + + +#define GET_PKG(pkg_base, pkg_no) (pkg_base + pkg_no) + +enum counter_scope {SCOPE_CPU, SCOPE_CORE, SCOPE_PACKAGE}; +enum counter_type {COUNTER_ITEMS, COUNTER_CYCLES, COUNTER_SECONDS, COUNTER_USEC}; +enum counter_format {FORMAT_RAW, FORMAT_DELTA, FORMAT_PERCENT}; + +struct msr_counter { + unsigned int msr_num; + char name[NAME_BYTES]; + char path[PATH_BYTES]; + unsigned int width; + enum counter_type type; + enum counter_format format; + struct msr_counter *next; + unsigned int flags; +#define FLAGS_HIDE (1 << 0) +#define FLAGS_SHOW (1 << 1) +#define SYSFS_PERCPU (1 << 1) +}; + +/* + * The accumulated sum of MSR is defined as a monotonic + * increasing MSR, it will be accumulated periodically, + * despite its register's bit width. + */ +enum { + IDX_PKG_ENERGY, + IDX_DRAM_ENERGY, + IDX_PP0_ENERGY, + IDX_PP1_ENERGY, + IDX_PKG_PERF, + IDX_DRAM_PERF, + IDX_COUNT, +}; + +int get_msr_sum(int cpu, off_t offset, unsigned long long *msr); + +struct msr_sum_array { + /* get_msr_sum() = sum + (get_msr() - last) */ + struct { + /*The accumulated MSR value is updated by the timer*/ + unsigned long long sum; + /*The MSR footprint recorded in last timer*/ + unsigned long long last; + } entries[IDX_COUNT]; +}; + +/* The percpu MSR sum array.*/ +struct msr_sum_array *per_cpu_msr_sum; + +off_t idx_to_offset(int idx) +{ + off_t offset; + + switch (idx) { + case IDX_PKG_ENERGY: + if (do_rapl & RAPL_AMD_F17H) + offset = MSR_PKG_ENERGY_STAT; + else + offset = MSR_PKG_ENERGY_STATUS; + break; + case IDX_DRAM_ENERGY: + offset = MSR_DRAM_ENERGY_STATUS; + break; + case IDX_PP0_ENERGY: + offset = MSR_PP0_ENERGY_STATUS; + break; + case IDX_PP1_ENERGY: + offset = MSR_PP1_ENERGY_STATUS; + break; + case IDX_PKG_PERF: + offset = MSR_PKG_PERF_STATUS; + break; + case IDX_DRAM_PERF: + offset = MSR_DRAM_PERF_STATUS; + break; + default: + offset = -1; + } + return offset; +} + +int offset_to_idx(off_t offset) +{ + int idx; + + switch (offset) { + case MSR_PKG_ENERGY_STATUS: + case MSR_PKG_ENERGY_STAT: + idx = IDX_PKG_ENERGY; + break; + case MSR_DRAM_ENERGY_STATUS: + idx = IDX_DRAM_ENERGY; + break; + case MSR_PP0_ENERGY_STATUS: + idx = IDX_PP0_ENERGY; + break; + case MSR_PP1_ENERGY_STATUS: + idx = IDX_PP1_ENERGY; + break; + case MSR_PKG_PERF_STATUS: + idx = IDX_PKG_PERF; + break; + case MSR_DRAM_PERF_STATUS: + idx = IDX_DRAM_PERF; + break; + default: + idx = -1; + } + return idx; +} + +int idx_valid(int idx) +{ + switch (idx) { + case IDX_PKG_ENERGY: + return do_rapl & (RAPL_PKG | RAPL_AMD_F17H); + case IDX_DRAM_ENERGY: + return do_rapl & RAPL_DRAM; + case IDX_PP0_ENERGY: + return do_rapl & RAPL_CORES_ENERGY_STATUS; + case IDX_PP1_ENERGY: + return do_rapl & RAPL_GFX; + case IDX_PKG_PERF: + return do_rapl & RAPL_PKG_PERF_STATUS; + case IDX_DRAM_PERF: + return do_rapl & RAPL_DRAM_PERF_STATUS; + default: + return 0; + } +} +struct sys_counters { + unsigned int added_thread_counters; + unsigned int added_core_counters; + unsigned int added_package_counters; + struct msr_counter *tp; + struct msr_counter *cp; + struct msr_counter *pp; +} sys; + +struct system_summary { + struct thread_data threads; + struct core_data cores; + struct pkg_data packages; +} average; + +struct cpu_topology { + int physical_package_id; + int die_id; + int logical_cpu_id; + int physical_node_id; + int logical_node_id; /* 0-based count within the package */ + int physical_core_id; + int thread_id; + cpu_set_t *put_ids; /* Processing Unit/Thread IDs */ +} *cpus; + +struct topo_params { + int num_packages; + int num_die; + int num_cpus; + int num_cores; + int max_cpu_num; + int max_node_num; + int nodes_per_pkg; + int cores_per_node; + int threads_per_core; +} topo; + +struct timeval tv_even, tv_odd, tv_delta; + +int *irq_column_2_cpu; /* /proc/interrupts column numbers */ +int *irqs_per_cpu; /* indexed by cpu_num */ + +void setup_all_buffers(void); + +char *sys_lpi_file; +char *sys_lpi_file_sysfs = "/sys/devices/system/cpu/cpuidle/low_power_idle_system_residency_us"; +char *sys_lpi_file_debugfs = "/sys/kernel/debug/pmc_core/slp_s0_residency_usec"; + +int cpu_is_not_present(int cpu) +{ + return !CPU_ISSET_S(cpu, cpu_present_setsize, cpu_present_set); +} +/* + * run func(thread, core, package) in topology order + * skip non-present cpus + */ + +int for_all_cpus(int (func)(struct thread_data *, struct core_data *, struct pkg_data *), + struct thread_data *thread_base, struct core_data *core_base, struct pkg_data *pkg_base) +{ + int retval, pkg_no, core_no, thread_no, node_no; + + for (pkg_no = 0; pkg_no < topo.num_packages; ++pkg_no) { + for (node_no = 0; node_no < topo.nodes_per_pkg; node_no++) { + for (core_no = 0; core_no < topo.cores_per_node; ++core_no) { + for (thread_no = 0; thread_no < + topo.threads_per_core; ++thread_no) { + struct thread_data *t; + struct core_data *c; + struct pkg_data *p; + + t = GET_THREAD(thread_base, thread_no, + core_no, node_no, + pkg_no); + + if (cpu_is_not_present(t->cpu_id)) + continue; + + c = GET_CORE(core_base, core_no, + node_no, pkg_no); + p = GET_PKG(pkg_base, pkg_no); + + retval = func(t, c, p); + if (retval) + return retval; + } + } + } + } + return 0; +} + +int cpu_migrate(int cpu) +{ + CPU_ZERO_S(cpu_affinity_setsize, cpu_affinity_set); + CPU_SET_S(cpu, cpu_affinity_setsize, cpu_affinity_set); + if (sched_setaffinity(0, cpu_affinity_setsize, cpu_affinity_set) == -1) + return -1; + else + return 0; +} +int get_msr_fd(int cpu) +{ + char pathname[32]; + int fd; + + fd = fd_percpu[cpu]; + + if (fd) + return fd; + + sprintf(pathname, "/dev/cpu/%d/msr", cpu); + fd = open(pathname, O_RDONLY); + if (fd < 0) + err(-1, "%s open failed, try chown or chmod +r /dev/cpu/*/msr, or run as root", pathname); + + fd_percpu[cpu] = fd; + + return fd; +} + +int get_msr(int cpu, off_t offset, unsigned long long *msr) +{ + ssize_t retval; + + retval = pread(get_msr_fd(cpu), msr, sizeof(*msr), offset); + + if (retval != sizeof *msr) + err(-1, "cpu%d: msr offset 0x%llx read failed", cpu, (unsigned long long)offset); + + return 0; +} + +/* + * This list matches the column headers, except + * 1. built-in only, the sysfs counters are not here -- we learn of those at run-time + * 2. Core and CPU are moved to the end, we can't have strings that contain them + * matching on them for --show and --hide. + */ +struct msr_counter bic[] = { + { 0x0, "usec" }, + { 0x0, "Time_Of_Day_Seconds" }, + { 0x0, "Package" }, + { 0x0, "Node" }, + { 0x0, "Avg_MHz" }, + { 0x0, "Busy%" }, + { 0x0, "Bzy_MHz" }, + { 0x0, "TSC_MHz" }, + { 0x0, "IRQ" }, + { 0x0, "SMI", "", 32, 0, FORMAT_DELTA, NULL}, + { 0x0, "sysfs" }, + { 0x0, "CPU%c1" }, + { 0x0, "CPU%c3" }, + { 0x0, "CPU%c6" }, + { 0x0, "CPU%c7" }, + { 0x0, "ThreadC" }, + { 0x0, "CoreTmp" }, + { 0x0, "CoreCnt" }, + { 0x0, "PkgTmp" }, + { 0x0, "GFX%rc6" }, + { 0x0, "GFXMHz" }, + { 0x0, "Pkg%pc2" }, + { 0x0, "Pkg%pc3" }, + { 0x0, "Pkg%pc6" }, + { 0x0, "Pkg%pc7" }, + { 0x0, "Pkg%pc8" }, + { 0x0, "Pkg%pc9" }, + { 0x0, "Pk%pc10" }, + { 0x0, "CPU%LPI" }, + { 0x0, "SYS%LPI" }, + { 0x0, "PkgWatt" }, + { 0x0, "CorWatt" }, + { 0x0, "GFXWatt" }, + { 0x0, "PkgCnt" }, + { 0x0, "RAMWatt" }, + { 0x0, "PKG_%" }, + { 0x0, "RAM_%" }, + { 0x0, "Pkg_J" }, + { 0x0, "Cor_J" }, + { 0x0, "GFX_J" }, + { 0x0, "RAM_J" }, + { 0x0, "Mod%c6" }, + { 0x0, "Totl%C0" }, + { 0x0, "Any%C0" }, + { 0x0, "GFX%C0" }, + { 0x0, "CPUGFX%" }, + { 0x0, "Core" }, + { 0x0, "CPU" }, + { 0x0, "APIC" }, + { 0x0, "X2APIC" }, + { 0x0, "Die" }, + { 0x0, "GFXAMHz" }, +}; + +#define MAX_BIC (sizeof(bic) / sizeof(struct msr_counter)) +#define BIC_USEC (1ULL << 0) +#define BIC_TOD (1ULL << 1) +#define BIC_Package (1ULL << 2) +#define BIC_Node (1ULL << 3) +#define BIC_Avg_MHz (1ULL << 4) +#define BIC_Busy (1ULL << 5) +#define BIC_Bzy_MHz (1ULL << 6) +#define BIC_TSC_MHz (1ULL << 7) +#define BIC_IRQ (1ULL << 8) +#define BIC_SMI (1ULL << 9) +#define BIC_sysfs (1ULL << 10) +#define BIC_CPU_c1 (1ULL << 11) +#define BIC_CPU_c3 (1ULL << 12) +#define BIC_CPU_c6 (1ULL << 13) +#define BIC_CPU_c7 (1ULL << 14) +#define BIC_ThreadC (1ULL << 15) +#define BIC_CoreTmp (1ULL << 16) +#define BIC_CoreCnt (1ULL << 17) +#define BIC_PkgTmp (1ULL << 18) +#define BIC_GFX_rc6 (1ULL << 19) +#define BIC_GFXMHz (1ULL << 20) +#define BIC_Pkgpc2 (1ULL << 21) +#define BIC_Pkgpc3 (1ULL << 22) +#define BIC_Pkgpc6 (1ULL << 23) +#define BIC_Pkgpc7 (1ULL << 24) +#define BIC_Pkgpc8 (1ULL << 25) +#define BIC_Pkgpc9 (1ULL << 26) +#define BIC_Pkgpc10 (1ULL << 27) +#define BIC_CPU_LPI (1ULL << 28) +#define BIC_SYS_LPI (1ULL << 29) +#define BIC_PkgWatt (1ULL << 30) +#define BIC_CorWatt (1ULL << 31) +#define BIC_GFXWatt (1ULL << 32) +#define BIC_PkgCnt (1ULL << 33) +#define BIC_RAMWatt (1ULL << 34) +#define BIC_PKG__ (1ULL << 35) +#define BIC_RAM__ (1ULL << 36) +#define BIC_Pkg_J (1ULL << 37) +#define BIC_Cor_J (1ULL << 38) +#define BIC_GFX_J (1ULL << 39) +#define BIC_RAM_J (1ULL << 40) +#define BIC_Mod_c6 (1ULL << 41) +#define BIC_Totl_c0 (1ULL << 42) +#define BIC_Any_c0 (1ULL << 43) +#define BIC_GFX_c0 (1ULL << 44) +#define BIC_CPUGFX (1ULL << 45) +#define BIC_Core (1ULL << 46) +#define BIC_CPU (1ULL << 47) +#define BIC_APIC (1ULL << 48) +#define BIC_X2APIC (1ULL << 49) +#define BIC_Die (1ULL << 50) +#define BIC_GFXACTMHz (1ULL << 51) + +#define BIC_DISABLED_BY_DEFAULT (BIC_USEC | BIC_TOD | BIC_APIC | BIC_X2APIC) + +unsigned long long bic_enabled = (0xFFFFFFFFFFFFFFFFULL & ~BIC_DISABLED_BY_DEFAULT); +unsigned long long bic_present = BIC_USEC | BIC_TOD | BIC_sysfs | BIC_APIC | BIC_X2APIC; + +#define DO_BIC(COUNTER_NAME) (bic_enabled & bic_present & COUNTER_NAME) +#define DO_BIC_READ(COUNTER_NAME) (bic_present & COUNTER_NAME) +#define ENABLE_BIC(COUNTER_NAME) (bic_enabled |= COUNTER_NAME) +#define BIC_PRESENT(COUNTER_BIT) (bic_present |= COUNTER_BIT) +#define BIC_NOT_PRESENT(COUNTER_BIT) (bic_present &= ~COUNTER_BIT) + + +#define MAX_DEFERRED 16 +char *deferred_skip_names[MAX_DEFERRED]; +int deferred_skip_index; + +/* + * HIDE_LIST - hide this list of counters, show the rest [default] + * SHOW_LIST - show this list of counters, hide the rest + */ +enum show_hide_mode { SHOW_LIST, HIDE_LIST } global_show_hide_mode = HIDE_LIST; + +void help(void) +{ + fprintf(outf, + "Usage: turbostat [OPTIONS][(--interval seconds) | COMMAND ...]\n" + "\n" + "Turbostat forks the specified COMMAND and prints statistics\n" + "when COMMAND completes.\n" + "If no COMMAND is specified, turbostat wakes every 5-seconds\n" + "to print statistics, until interrupted.\n" + " -a, --add add a counter\n" + " eg. --add msr0x10,u64,cpu,delta,MY_TSC\n" + " -c, --cpu cpu-set limit output to summary plus cpu-set:\n" + " {core | package | j,k,l..m,n-p }\n" + " -d, --debug displays usec, Time_Of_Day_Seconds and more debugging\n" + " -D, --Dump displays the raw counter values\n" + " -e, --enable [all | column]\n" + " shows all or the specified disabled column\n" + " -H, --hide [column|column,column,...]\n" + " hide the specified column(s)\n" + " -i, --interval sec.subsec\n" + " Override default 5-second measurement interval\n" + " -J, --Joules displays energy in Joules instead of Watts\n" + " -l, --list list column headers only\n" + " -n, --num_iterations num\n" + " number of the measurement iterations\n" + " -o, --out file\n" + " create or truncate \"file\" for all output\n" + " -q, --quiet skip decoding system configuration header\n" + " -s, --show [column|column,column,...]\n" + " show only the specified column(s)\n" + " -S, --Summary\n" + " limits output to 1-line system summary per interval\n" + " -T, --TCC temperature\n" + " sets the Thermal Control Circuit temperature in\n" + " degrees Celsius\n" + " -h, --help print this help message\n" + " -v, --version print version information\n" + "\n" + "For more help, run \"man turbostat\"\n"); +} + +/* + * bic_lookup + * for all the strings in comma separate name_list, + * set the approprate bit in return value. + */ +unsigned long long bic_lookup(char *name_list, enum show_hide_mode mode) +{ + int i; + unsigned long long retval = 0; + + while (name_list) { + char *comma; + + comma = strchr(name_list, ','); + + if (comma) + *comma = '\0'; + + if (!strcmp(name_list, "all")) + return ~0; + + for (i = 0; i < MAX_BIC; ++i) { + if (!strcmp(name_list, bic[i].name)) { + retval |= (1ULL << i); + break; + } + } + if (i == MAX_BIC) { + if (mode == SHOW_LIST) { + fprintf(stderr, "Invalid counter name: %s\n", name_list); + exit(-1); + } + deferred_skip_names[deferred_skip_index++] = name_list; + if (debug) + fprintf(stderr, "deferred \"%s\"\n", name_list); + if (deferred_skip_index >= MAX_DEFERRED) { + fprintf(stderr, "More than max %d un-recognized --skip options '%s'\n", + MAX_DEFERRED, name_list); + help(); + exit(1); + } + } + + name_list = comma; + if (name_list) + name_list++; + + } + return retval; +} + + +void print_header(char *delim) +{ + struct msr_counter *mp; + int printed = 0; + + if (DO_BIC(BIC_USEC)) + outp += sprintf(outp, "%susec", (printed++ ? delim : "")); + if (DO_BIC(BIC_TOD)) + outp += sprintf(outp, "%sTime_Of_Day_Seconds", (printed++ ? delim : "")); + if (DO_BIC(BIC_Package)) + outp += sprintf(outp, "%sPackage", (printed++ ? delim : "")); + if (DO_BIC(BIC_Die)) + outp += sprintf(outp, "%sDie", (printed++ ? delim : "")); + if (DO_BIC(BIC_Node)) + outp += sprintf(outp, "%sNode", (printed++ ? delim : "")); + if (DO_BIC(BIC_Core)) + outp += sprintf(outp, "%sCore", (printed++ ? delim : "")); + if (DO_BIC(BIC_CPU)) + outp += sprintf(outp, "%sCPU", (printed++ ? delim : "")); + if (DO_BIC(BIC_APIC)) + outp += sprintf(outp, "%sAPIC", (printed++ ? delim : "")); + if (DO_BIC(BIC_X2APIC)) + outp += sprintf(outp, "%sX2APIC", (printed++ ? delim : "")); + if (DO_BIC(BIC_Avg_MHz)) + outp += sprintf(outp, "%sAvg_MHz", (printed++ ? delim : "")); + if (DO_BIC(BIC_Busy)) + outp += sprintf(outp, "%sBusy%%", (printed++ ? delim : "")); + if (DO_BIC(BIC_Bzy_MHz)) + outp += sprintf(outp, "%sBzy_MHz", (printed++ ? delim : "")); + if (DO_BIC(BIC_TSC_MHz)) + outp += sprintf(outp, "%sTSC_MHz", (printed++ ? delim : "")); + + if (DO_BIC(BIC_IRQ)) { + if (sums_need_wide_columns) + outp += sprintf(outp, "%s IRQ", (printed++ ? delim : "")); + else + outp += sprintf(outp, "%sIRQ", (printed++ ? delim : "")); + } + + if (DO_BIC(BIC_SMI)) + outp += sprintf(outp, "%sSMI", (printed++ ? delim : "")); + + for (mp = sys.tp; mp; mp = mp->next) { + + if (mp->format == FORMAT_RAW) { + if (mp->width == 64) + outp += sprintf(outp, "%s%18.18s", (printed++ ? delim : ""), mp->name); + else + outp += sprintf(outp, "%s%10.10s", (printed++ ? delim : ""), mp->name); + } else { + if ((mp->type == COUNTER_ITEMS) && sums_need_wide_columns) + outp += sprintf(outp, "%s%8s", (printed++ ? delim : ""), mp->name); + else + outp += sprintf(outp, "%s%s", (printed++ ? delim : ""), mp->name); + } + } + + if (DO_BIC(BIC_CPU_c1)) + outp += sprintf(outp, "%sCPU%%c1", (printed++ ? delim : "")); + if (DO_BIC(BIC_CPU_c3)) + outp += sprintf(outp, "%sCPU%%c3", (printed++ ? delim : "")); + if (DO_BIC(BIC_CPU_c6)) + outp += sprintf(outp, "%sCPU%%c6", (printed++ ? delim : "")); + if (DO_BIC(BIC_CPU_c7)) + outp += sprintf(outp, "%sCPU%%c7", (printed++ ? delim : "")); + + if (DO_BIC(BIC_Mod_c6)) + outp += sprintf(outp, "%sMod%%c6", (printed++ ? delim : "")); + + if (DO_BIC(BIC_CoreTmp)) + outp += sprintf(outp, "%sCoreTmp", (printed++ ? delim : "")); + + if (do_rapl && !rapl_joules) { + if (DO_BIC(BIC_CorWatt) && (do_rapl & RAPL_PER_CORE_ENERGY)) + outp += sprintf(outp, "%sCorWatt", (printed++ ? delim : "")); + } else if (do_rapl && rapl_joules) { + if (DO_BIC(BIC_Cor_J) && (do_rapl & RAPL_PER_CORE_ENERGY)) + outp += sprintf(outp, "%sCor_J", (printed++ ? delim : "")); + } + + for (mp = sys.cp; mp; mp = mp->next) { + if (mp->format == FORMAT_RAW) { + if (mp->width == 64) + outp += sprintf(outp, "%s%18.18s", delim, mp->name); + else + outp += sprintf(outp, "%s%10.10s", delim, mp->name); + } else { + if ((mp->type == COUNTER_ITEMS) && sums_need_wide_columns) + outp += sprintf(outp, "%s%8s", delim, mp->name); + else + outp += sprintf(outp, "%s%s", delim, mp->name); + } + } + + if (DO_BIC(BIC_PkgTmp)) + outp += sprintf(outp, "%sPkgTmp", (printed++ ? delim : "")); + + if (DO_BIC(BIC_GFX_rc6)) + outp += sprintf(outp, "%sGFX%%rc6", (printed++ ? delim : "")); + + if (DO_BIC(BIC_GFXMHz)) + outp += sprintf(outp, "%sGFXMHz", (printed++ ? delim : "")); + + if (DO_BIC(BIC_GFXACTMHz)) + outp += sprintf(outp, "%sGFXAMHz", (printed++ ? delim : "")); + + if (DO_BIC(BIC_Totl_c0)) + outp += sprintf(outp, "%sTotl%%C0", (printed++ ? delim : "")); + if (DO_BIC(BIC_Any_c0)) + outp += sprintf(outp, "%sAny%%C0", (printed++ ? delim : "")); + if (DO_BIC(BIC_GFX_c0)) + outp += sprintf(outp, "%sGFX%%C0", (printed++ ? delim : "")); + if (DO_BIC(BIC_CPUGFX)) + outp += sprintf(outp, "%sCPUGFX%%", (printed++ ? delim : "")); + + if (DO_BIC(BIC_Pkgpc2)) + outp += sprintf(outp, "%sPkg%%pc2", (printed++ ? delim : "")); + if (DO_BIC(BIC_Pkgpc3)) + outp += sprintf(outp, "%sPkg%%pc3", (printed++ ? delim : "")); + if (DO_BIC(BIC_Pkgpc6)) + outp += sprintf(outp, "%sPkg%%pc6", (printed++ ? delim : "")); + if (DO_BIC(BIC_Pkgpc7)) + outp += sprintf(outp, "%sPkg%%pc7", (printed++ ? delim : "")); + if (DO_BIC(BIC_Pkgpc8)) + outp += sprintf(outp, "%sPkg%%pc8", (printed++ ? delim : "")); + if (DO_BIC(BIC_Pkgpc9)) + outp += sprintf(outp, "%sPkg%%pc9", (printed++ ? delim : "")); + if (DO_BIC(BIC_Pkgpc10)) + outp += sprintf(outp, "%sPk%%pc10", (printed++ ? delim : "")); + if (DO_BIC(BIC_CPU_LPI)) + outp += sprintf(outp, "%sCPU%%LPI", (printed++ ? delim : "")); + if (DO_BIC(BIC_SYS_LPI)) + outp += sprintf(outp, "%sSYS%%LPI", (printed++ ? delim : "")); + + if (do_rapl && !rapl_joules) { + if (DO_BIC(BIC_PkgWatt)) + outp += sprintf(outp, "%sPkgWatt", (printed++ ? delim : "")); + if (DO_BIC(BIC_CorWatt) && !(do_rapl & RAPL_PER_CORE_ENERGY)) + outp += sprintf(outp, "%sCorWatt", (printed++ ? delim : "")); + if (DO_BIC(BIC_GFXWatt)) + outp += sprintf(outp, "%sGFXWatt", (printed++ ? delim : "")); + if (DO_BIC(BIC_RAMWatt)) + outp += sprintf(outp, "%sRAMWatt", (printed++ ? delim : "")); + if (DO_BIC(BIC_PKG__)) + outp += sprintf(outp, "%sPKG_%%", (printed++ ? delim : "")); + if (DO_BIC(BIC_RAM__)) + outp += sprintf(outp, "%sRAM_%%", (printed++ ? delim : "")); + } else if (do_rapl && rapl_joules) { + if (DO_BIC(BIC_Pkg_J)) + outp += sprintf(outp, "%sPkg_J", (printed++ ? delim : "")); + if (DO_BIC(BIC_Cor_J) && !(do_rapl & RAPL_PER_CORE_ENERGY)) + outp += sprintf(outp, "%sCor_J", (printed++ ? delim : "")); + if (DO_BIC(BIC_GFX_J)) + outp += sprintf(outp, "%sGFX_J", (printed++ ? delim : "")); + if (DO_BIC(BIC_RAM_J)) + outp += sprintf(outp, "%sRAM_J", (printed++ ? delim : "")); + if (DO_BIC(BIC_PKG__)) + outp += sprintf(outp, "%sPKG_%%", (printed++ ? delim : "")); + if (DO_BIC(BIC_RAM__)) + outp += sprintf(outp, "%sRAM_%%", (printed++ ? delim : "")); + } + for (mp = sys.pp; mp; mp = mp->next) { + if (mp->format == FORMAT_RAW) { + if (mp->width == 64) + outp += sprintf(outp, "%s%18.18s", delim, mp->name); + else + outp += sprintf(outp, "%s%10.10s", delim, mp->name); + } else { + if ((mp->type == COUNTER_ITEMS) && sums_need_wide_columns) + outp += sprintf(outp, "%s%8s", delim, mp->name); + else + outp += sprintf(outp, "%s%s", delim, mp->name); + } + } + + outp += sprintf(outp, "\n"); +} + +int dump_counters(struct thread_data *t, struct core_data *c, + struct pkg_data *p) +{ + int i; + struct msr_counter *mp; + + outp += sprintf(outp, "t %p, c %p, p %p\n", t, c, p); + + if (t) { + outp += sprintf(outp, "CPU: %d flags 0x%x\n", + t->cpu_id, t->flags); + outp += sprintf(outp, "TSC: %016llX\n", t->tsc); + outp += sprintf(outp, "aperf: %016llX\n", t->aperf); + outp += sprintf(outp, "mperf: %016llX\n", t->mperf); + outp += sprintf(outp, "c1: %016llX\n", t->c1); + + if (DO_BIC(BIC_IRQ)) + outp += sprintf(outp, "IRQ: %lld\n", t->irq_count); + if (DO_BIC(BIC_SMI)) + outp += sprintf(outp, "SMI: %d\n", t->smi_count); + + for (i = 0, mp = sys.tp; mp; i++, mp = mp->next) { + outp += sprintf(outp, "tADDED [%d] msr0x%x: %08llX\n", + i, mp->msr_num, t->counter[i]); + } + } + + if (c) { + outp += sprintf(outp, "core: %d\n", c->core_id); + outp += sprintf(outp, "c3: %016llX\n", c->c3); + outp += sprintf(outp, "c6: %016llX\n", c->c6); + outp += sprintf(outp, "c7: %016llX\n", c->c7); + outp += sprintf(outp, "DTS: %dC\n", c->core_temp_c); + outp += sprintf(outp, "Joules: %0X\n", c->core_energy); + + for (i = 0, mp = sys.cp; mp; i++, mp = mp->next) { + outp += sprintf(outp, "cADDED [%d] msr0x%x: %08llX\n", + i, mp->msr_num, c->counter[i]); + } + outp += sprintf(outp, "mc6_us: %016llX\n", c->mc6_us); + } + + if (p) { + outp += sprintf(outp, "package: %d\n", p->package_id); + + outp += sprintf(outp, "Weighted cores: %016llX\n", p->pkg_wtd_core_c0); + outp += sprintf(outp, "Any cores: %016llX\n", p->pkg_any_core_c0); + outp += sprintf(outp, "Any GFX: %016llX\n", p->pkg_any_gfxe_c0); + outp += sprintf(outp, "CPU + GFX: %016llX\n", p->pkg_both_core_gfxe_c0); + + outp += sprintf(outp, "pc2: %016llX\n", p->pc2); + if (DO_BIC(BIC_Pkgpc3)) + outp += sprintf(outp, "pc3: %016llX\n", p->pc3); + if (DO_BIC(BIC_Pkgpc6)) + outp += sprintf(outp, "pc6: %016llX\n", p->pc6); + if (DO_BIC(BIC_Pkgpc7)) + outp += sprintf(outp, "pc7: %016llX\n", p->pc7); + outp += sprintf(outp, "pc8: %016llX\n", p->pc8); + outp += sprintf(outp, "pc9: %016llX\n", p->pc9); + outp += sprintf(outp, "pc10: %016llX\n", p->pc10); + outp += sprintf(outp, "cpu_lpi: %016llX\n", p->cpu_lpi); + outp += sprintf(outp, "sys_lpi: %016llX\n", p->sys_lpi); + outp += sprintf(outp, "Joules PKG: %0llX\n", p->energy_pkg); + outp += sprintf(outp, "Joules COR: %0llX\n", p->energy_cores); + outp += sprintf(outp, "Joules GFX: %0llX\n", p->energy_gfx); + outp += sprintf(outp, "Joules RAM: %0llX\n", p->energy_dram); + outp += sprintf(outp, "Throttle PKG: %0llX\n", + p->rapl_pkg_perf_status); + outp += sprintf(outp, "Throttle RAM: %0llX\n", + p->rapl_dram_perf_status); + outp += sprintf(outp, "PTM: %dC\n", p->pkg_temp_c); + + for (i = 0, mp = sys.pp; mp; i++, mp = mp->next) { + outp += sprintf(outp, "pADDED [%d] msr0x%x: %08llX\n", + i, mp->msr_num, p->counter[i]); + } + } + + outp += sprintf(outp, "\n"); + + return 0; +} + +/* + * column formatting convention & formats + */ +int format_counters(struct thread_data *t, struct core_data *c, + struct pkg_data *p) +{ + double interval_float, tsc; + char *fmt8; + int i; + struct msr_counter *mp; + char *delim = "\t"; + int printed = 0; + + /* if showing only 1st thread in core and this isn't one, bail out */ + if (show_core_only && !(t->flags & CPU_IS_FIRST_THREAD_IN_CORE)) + return 0; + + /* if showing only 1st thread in pkg and this isn't one, bail out */ + if (show_pkg_only && !(t->flags & CPU_IS_FIRST_CORE_IN_PACKAGE)) + return 0; + + /*if not summary line and --cpu is used */ + if ((t != &average.threads) && + (cpu_subset && !CPU_ISSET_S(t->cpu_id, cpu_subset_size, cpu_subset))) + return 0; + + if (DO_BIC(BIC_USEC)) { + /* on each row, print how many usec each timestamp took to gather */ + struct timeval tv; + + timersub(&t->tv_end, &t->tv_begin, &tv); + outp += sprintf(outp, "%5ld\t", tv.tv_sec * 1000000 + tv.tv_usec); + } + + /* Time_Of_Day_Seconds: on each row, print sec.usec last timestamp taken */ + if (DO_BIC(BIC_TOD)) + outp += sprintf(outp, "%10ld.%06ld\t", t->tv_end.tv_sec, t->tv_end.tv_usec); + + interval_float = t->tv_delta.tv_sec + t->tv_delta.tv_usec/1000000.0; + + tsc = t->tsc * tsc_tweak; + + /* topo columns, print blanks on 1st (average) line */ + if (t == &average.threads) { + if (DO_BIC(BIC_Package)) + outp += sprintf(outp, "%s-", (printed++ ? delim : "")); + if (DO_BIC(BIC_Die)) + outp += sprintf(outp, "%s-", (printed++ ? delim : "")); + if (DO_BIC(BIC_Node)) + outp += sprintf(outp, "%s-", (printed++ ? delim : "")); + if (DO_BIC(BIC_Core)) + outp += sprintf(outp, "%s-", (printed++ ? delim : "")); + if (DO_BIC(BIC_CPU)) + outp += sprintf(outp, "%s-", (printed++ ? delim : "")); + if (DO_BIC(BIC_APIC)) + outp += sprintf(outp, "%s-", (printed++ ? delim : "")); + if (DO_BIC(BIC_X2APIC)) + outp += sprintf(outp, "%s-", (printed++ ? delim : "")); + } else { + if (DO_BIC(BIC_Package)) { + if (p) + outp += sprintf(outp, "%s%d", (printed++ ? delim : ""), p->package_id); + else + outp += sprintf(outp, "%s-", (printed++ ? delim : "")); + } + if (DO_BIC(BIC_Die)) { + if (c) + outp += sprintf(outp, "%s%d", (printed++ ? delim : ""), cpus[t->cpu_id].die_id); + else + outp += sprintf(outp, "%s-", (printed++ ? delim : "")); + } + if (DO_BIC(BIC_Node)) { + if (t) + outp += sprintf(outp, "%s%d", + (printed++ ? delim : ""), + cpus[t->cpu_id].physical_node_id); + else + outp += sprintf(outp, "%s-", + (printed++ ? delim : "")); + } + if (DO_BIC(BIC_Core)) { + if (c) + outp += sprintf(outp, "%s%d", (printed++ ? delim : ""), c->core_id); + else + outp += sprintf(outp, "%s-", (printed++ ? delim : "")); + } + if (DO_BIC(BIC_CPU)) + outp += sprintf(outp, "%s%d", (printed++ ? delim : ""), t->cpu_id); + if (DO_BIC(BIC_APIC)) + outp += sprintf(outp, "%s%d", (printed++ ? delim : ""), t->apic_id); + if (DO_BIC(BIC_X2APIC)) + outp += sprintf(outp, "%s%d", (printed++ ? delim : ""), t->x2apic_id); + } + + if (DO_BIC(BIC_Avg_MHz)) + outp += sprintf(outp, "%s%.0f", (printed++ ? delim : ""), + 1.0 / units * t->aperf / interval_float); + + if (DO_BIC(BIC_Busy)) + outp += sprintf(outp, "%s%.2f", (printed++ ? delim : ""), 100.0 * t->mperf/tsc); + + if (DO_BIC(BIC_Bzy_MHz)) { + if (has_base_hz) + outp += sprintf(outp, "%s%.0f", (printed++ ? delim : ""), base_hz / units * t->aperf / t->mperf); + else + outp += sprintf(outp, "%s%.0f", (printed++ ? delim : ""), + tsc / units * t->aperf / t->mperf / interval_float); + } + + if (DO_BIC(BIC_TSC_MHz)) + outp += sprintf(outp, "%s%.0f", (printed++ ? delim : ""), 1.0 * t->tsc/units/interval_float); + + /* IRQ */ + if (DO_BIC(BIC_IRQ)) { + if (sums_need_wide_columns) + outp += sprintf(outp, "%s%8lld", (printed++ ? delim : ""), t->irq_count); + else + outp += sprintf(outp, "%s%lld", (printed++ ? delim : ""), t->irq_count); + } + + /* SMI */ + if (DO_BIC(BIC_SMI)) + outp += sprintf(outp, "%s%d", (printed++ ? delim : ""), t->smi_count); + + /* Added counters */ + for (i = 0, mp = sys.tp; mp; i++, mp = mp->next) { + if (mp->format == FORMAT_RAW) { + if (mp->width == 32) + outp += sprintf(outp, "%s0x%08x", (printed++ ? delim : ""), (unsigned int) t->counter[i]); + else + outp += sprintf(outp, "%s0x%016llx", (printed++ ? delim : ""), t->counter[i]); + } else if (mp->format == FORMAT_DELTA) { + if ((mp->type == COUNTER_ITEMS) && sums_need_wide_columns) + outp += sprintf(outp, "%s%8lld", (printed++ ? delim : ""), t->counter[i]); + else + outp += sprintf(outp, "%s%lld", (printed++ ? delim : ""), t->counter[i]); + } else if (mp->format == FORMAT_PERCENT) { + if (mp->type == COUNTER_USEC) + outp += sprintf(outp, "%s%.2f", (printed++ ? delim : ""), t->counter[i]/interval_float/10000); + else + outp += sprintf(outp, "%s%.2f", (printed++ ? delim : ""), 100.0 * t->counter[i]/tsc); + } + } + + /* C1 */ + if (DO_BIC(BIC_CPU_c1)) + outp += sprintf(outp, "%s%.2f", (printed++ ? delim : ""), 100.0 * t->c1/tsc); + + + /* print per-core data only for 1st thread in core */ + if (!(t->flags & CPU_IS_FIRST_THREAD_IN_CORE)) + goto done; + + if (DO_BIC(BIC_CPU_c3)) + outp += sprintf(outp, "%s%.2f", (printed++ ? delim : ""), 100.0 * c->c3/tsc); + if (DO_BIC(BIC_CPU_c6)) + outp += sprintf(outp, "%s%.2f", (printed++ ? delim : ""), 100.0 * c->c6/tsc); + if (DO_BIC(BIC_CPU_c7)) + outp += sprintf(outp, "%s%.2f", (printed++ ? delim : ""), 100.0 * c->c7/tsc); + + /* Mod%c6 */ + if (DO_BIC(BIC_Mod_c6)) + outp += sprintf(outp, "%s%.2f", (printed++ ? delim : ""), 100.0 * c->mc6_us / tsc); + + if (DO_BIC(BIC_CoreTmp)) + outp += sprintf(outp, "%s%d", (printed++ ? delim : ""), c->core_temp_c); + + for (i = 0, mp = sys.cp; mp; i++, mp = mp->next) { + if (mp->format == FORMAT_RAW) { + if (mp->width == 32) + outp += sprintf(outp, "%s0x%08x", (printed++ ? delim : ""), (unsigned int) c->counter[i]); + else + outp += sprintf(outp, "%s0x%016llx", (printed++ ? delim : ""), c->counter[i]); + } else if (mp->format == FORMAT_DELTA) { + if ((mp->type == COUNTER_ITEMS) && sums_need_wide_columns) + outp += sprintf(outp, "%s%8lld", (printed++ ? delim : ""), c->counter[i]); + else + outp += sprintf(outp, "%s%lld", (printed++ ? delim : ""), c->counter[i]); + } else if (mp->format == FORMAT_PERCENT) { + outp += sprintf(outp, "%s%.2f", (printed++ ? delim : ""), 100.0 * c->counter[i]/tsc); + } + } + + fmt8 = "%s%.2f"; + + if (DO_BIC(BIC_CorWatt) && (do_rapl & RAPL_PER_CORE_ENERGY)) + outp += sprintf(outp, fmt8, (printed++ ? delim : ""), c->core_energy * rapl_energy_units / interval_float); + if (DO_BIC(BIC_Cor_J) && (do_rapl & RAPL_PER_CORE_ENERGY)) + outp += sprintf(outp, fmt8, (printed++ ? delim : ""), c->core_energy * rapl_energy_units); + + /* print per-package data only for 1st core in package */ + if (!(t->flags & CPU_IS_FIRST_CORE_IN_PACKAGE)) + goto done; + + /* PkgTmp */ + if (DO_BIC(BIC_PkgTmp)) + outp += sprintf(outp, "%s%d", (printed++ ? delim : ""), p->pkg_temp_c); + + /* GFXrc6 */ + if (DO_BIC(BIC_GFX_rc6)) { + if (p->gfx_rc6_ms == -1) { /* detect GFX counter reset */ + outp += sprintf(outp, "%s**.**", (printed++ ? delim : "")); + } else { + outp += sprintf(outp, "%s%.2f", (printed++ ? delim : ""), + p->gfx_rc6_ms / 10.0 / interval_float); + } + } + + /* GFXMHz */ + if (DO_BIC(BIC_GFXMHz)) + outp += sprintf(outp, "%s%d", (printed++ ? delim : ""), p->gfx_mhz); + + /* GFXACTMHz */ + if (DO_BIC(BIC_GFXACTMHz)) + outp += sprintf(outp, "%s%d", (printed++ ? delim : ""), p->gfx_act_mhz); + + /* Totl%C0, Any%C0 GFX%C0 CPUGFX% */ + if (DO_BIC(BIC_Totl_c0)) + outp += sprintf(outp, "%s%.2f", (printed++ ? delim : ""), 100.0 * p->pkg_wtd_core_c0/tsc); + if (DO_BIC(BIC_Any_c0)) + outp += sprintf(outp, "%s%.2f", (printed++ ? delim : ""), 100.0 * p->pkg_any_core_c0/tsc); + if (DO_BIC(BIC_GFX_c0)) + outp += sprintf(outp, "%s%.2f", (printed++ ? delim : ""), 100.0 * p->pkg_any_gfxe_c0/tsc); + if (DO_BIC(BIC_CPUGFX)) + outp += sprintf(outp, "%s%.2f", (printed++ ? delim : ""), 100.0 * p->pkg_both_core_gfxe_c0/tsc); + + if (DO_BIC(BIC_Pkgpc2)) + outp += sprintf(outp, "%s%.2f", (printed++ ? delim : ""), 100.0 * p->pc2/tsc); + if (DO_BIC(BIC_Pkgpc3)) + outp += sprintf(outp, "%s%.2f", (printed++ ? delim : ""), 100.0 * p->pc3/tsc); + if (DO_BIC(BIC_Pkgpc6)) + outp += sprintf(outp, "%s%.2f", (printed++ ? delim : ""), 100.0 * p->pc6/tsc); + if (DO_BIC(BIC_Pkgpc7)) + outp += sprintf(outp, "%s%.2f", (printed++ ? delim : ""), 100.0 * p->pc7/tsc); + if (DO_BIC(BIC_Pkgpc8)) + outp += sprintf(outp, "%s%.2f", (printed++ ? delim : ""), 100.0 * p->pc8/tsc); + if (DO_BIC(BIC_Pkgpc9)) + outp += sprintf(outp, "%s%.2f", (printed++ ? delim : ""), 100.0 * p->pc9/tsc); + if (DO_BIC(BIC_Pkgpc10)) + outp += sprintf(outp, "%s%.2f", (printed++ ? delim : ""), 100.0 * p->pc10/tsc); + + if (DO_BIC(BIC_CPU_LPI)) + outp += sprintf(outp, "%s%.2f", (printed++ ? delim : ""), 100.0 * p->cpu_lpi / 1000000.0 / interval_float); + if (DO_BIC(BIC_SYS_LPI)) + outp += sprintf(outp, "%s%.2f", (printed++ ? delim : ""), 100.0 * p->sys_lpi / 1000000.0 / interval_float); + + if (DO_BIC(BIC_PkgWatt)) + outp += sprintf(outp, fmt8, (printed++ ? delim : ""), p->energy_pkg * rapl_energy_units / interval_float); + if (DO_BIC(BIC_CorWatt) && !(do_rapl & RAPL_PER_CORE_ENERGY)) + outp += sprintf(outp, fmt8, (printed++ ? delim : ""), p->energy_cores * rapl_energy_units / interval_float); + if (DO_BIC(BIC_GFXWatt)) + outp += sprintf(outp, fmt8, (printed++ ? delim : ""), p->energy_gfx * rapl_energy_units / interval_float); + if (DO_BIC(BIC_RAMWatt)) + outp += sprintf(outp, fmt8, (printed++ ? delim : ""), p->energy_dram * rapl_dram_energy_units / interval_float); + if (DO_BIC(BIC_Pkg_J)) + outp += sprintf(outp, fmt8, (printed++ ? delim : ""), p->energy_pkg * rapl_energy_units); + if (DO_BIC(BIC_Cor_J) && !(do_rapl & RAPL_PER_CORE_ENERGY)) + outp += sprintf(outp, fmt8, (printed++ ? delim : ""), p->energy_cores * rapl_energy_units); + if (DO_BIC(BIC_GFX_J)) + outp += sprintf(outp, fmt8, (printed++ ? delim : ""), p->energy_gfx * rapl_energy_units); + if (DO_BIC(BIC_RAM_J)) + outp += sprintf(outp, fmt8, (printed++ ? delim : ""), p->energy_dram * rapl_dram_energy_units); + if (DO_BIC(BIC_PKG__)) + outp += sprintf(outp, fmt8, (printed++ ? delim : ""), 100.0 * p->rapl_pkg_perf_status * rapl_time_units / interval_float); + if (DO_BIC(BIC_RAM__)) + outp += sprintf(outp, fmt8, (printed++ ? delim : ""), 100.0 * p->rapl_dram_perf_status * rapl_time_units / interval_float); + + for (i = 0, mp = sys.pp; mp; i++, mp = mp->next) { + if (mp->format == FORMAT_RAW) { + if (mp->width == 32) + outp += sprintf(outp, "%s0x%08x", (printed++ ? delim : ""), (unsigned int) p->counter[i]); + else + outp += sprintf(outp, "%s0x%016llx", (printed++ ? delim : ""), p->counter[i]); + } else if (mp->format == FORMAT_DELTA) { + if ((mp->type == COUNTER_ITEMS) && sums_need_wide_columns) + outp += sprintf(outp, "%s%8lld", (printed++ ? delim : ""), p->counter[i]); + else + outp += sprintf(outp, "%s%lld", (printed++ ? delim : ""), p->counter[i]); + } else if (mp->format == FORMAT_PERCENT) { + outp += sprintf(outp, "%s%.2f", (printed++ ? delim : ""), 100.0 * p->counter[i]/tsc); + } + } + +done: + if (*(outp - 1) != '\n') + outp += sprintf(outp, "\n"); + + return 0; +} + +void flush_output_stdout(void) +{ + FILE *filep; + + if (outf == stderr) + filep = stdout; + else + filep = outf; + + fputs(output_buffer, filep); + fflush(filep); + + outp = output_buffer; +} +void flush_output_stderr(void) +{ + fputs(output_buffer, outf); + fflush(outf); + outp = output_buffer; +} +void format_all_counters(struct thread_data *t, struct core_data *c, struct pkg_data *p) +{ + static int printed; + + if (!printed || !summary_only) + print_header("\t"); + + format_counters(&average.threads, &average.cores, &average.packages); + + printed = 1; + + if (summary_only) + return; + + for_all_cpus(format_counters, t, c, p); +} + +#define DELTA_WRAP32(new, old) \ + old = ((((unsigned long long)new << 32) - ((unsigned long long)old << 32)) >> 32); + +int +delta_package(struct pkg_data *new, struct pkg_data *old) +{ + int i; + struct msr_counter *mp; + + + if (DO_BIC(BIC_Totl_c0)) + old->pkg_wtd_core_c0 = new->pkg_wtd_core_c0 - old->pkg_wtd_core_c0; + if (DO_BIC(BIC_Any_c0)) + old->pkg_any_core_c0 = new->pkg_any_core_c0 - old->pkg_any_core_c0; + if (DO_BIC(BIC_GFX_c0)) + old->pkg_any_gfxe_c0 = new->pkg_any_gfxe_c0 - old->pkg_any_gfxe_c0; + if (DO_BIC(BIC_CPUGFX)) + old->pkg_both_core_gfxe_c0 = new->pkg_both_core_gfxe_c0 - old->pkg_both_core_gfxe_c0; + + old->pc2 = new->pc2 - old->pc2; + if (DO_BIC(BIC_Pkgpc3)) + old->pc3 = new->pc3 - old->pc3; + if (DO_BIC(BIC_Pkgpc6)) + old->pc6 = new->pc6 - old->pc6; + if (DO_BIC(BIC_Pkgpc7)) + old->pc7 = new->pc7 - old->pc7; + old->pc8 = new->pc8 - old->pc8; + old->pc9 = new->pc9 - old->pc9; + old->pc10 = new->pc10 - old->pc10; + old->cpu_lpi = new->cpu_lpi - old->cpu_lpi; + old->sys_lpi = new->sys_lpi - old->sys_lpi; + old->pkg_temp_c = new->pkg_temp_c; + + /* flag an error when rc6 counter resets/wraps */ + if (old->gfx_rc6_ms > new->gfx_rc6_ms) + old->gfx_rc6_ms = -1; + else + old->gfx_rc6_ms = new->gfx_rc6_ms - old->gfx_rc6_ms; + + old->gfx_mhz = new->gfx_mhz; + old->gfx_act_mhz = new->gfx_act_mhz; + + old->energy_pkg = new->energy_pkg - old->energy_pkg; + old->energy_cores = new->energy_cores - old->energy_cores; + old->energy_gfx = new->energy_gfx - old->energy_gfx; + old->energy_dram = new->energy_dram - old->energy_dram; + old->rapl_pkg_perf_status = new->rapl_pkg_perf_status - old->rapl_pkg_perf_status; + old->rapl_dram_perf_status = new->rapl_dram_perf_status - old->rapl_dram_perf_status; + + for (i = 0, mp = sys.pp; mp; i++, mp = mp->next) { + if (mp->format == FORMAT_RAW) + old->counter[i] = new->counter[i]; + else + old->counter[i] = new->counter[i] - old->counter[i]; + } + + return 0; +} + +void +delta_core(struct core_data *new, struct core_data *old) +{ + int i; + struct msr_counter *mp; + + old->c3 = new->c3 - old->c3; + old->c6 = new->c6 - old->c6; + old->c7 = new->c7 - old->c7; + old->core_temp_c = new->core_temp_c; + old->mc6_us = new->mc6_us - old->mc6_us; + + DELTA_WRAP32(new->core_energy, old->core_energy); + + for (i = 0, mp = sys.cp; mp; i++, mp = mp->next) { + if (mp->format == FORMAT_RAW) + old->counter[i] = new->counter[i]; + else + old->counter[i] = new->counter[i] - old->counter[i]; + } +} + +int soft_c1_residency_display(int bic) +{ + if (!DO_BIC(BIC_CPU_c1) || use_c1_residency_msr) + return 0; + + return DO_BIC_READ(bic); +} + +/* + * old = new - old + */ +int +delta_thread(struct thread_data *new, struct thread_data *old, + struct core_data *core_delta) +{ + int i; + struct msr_counter *mp; + + /* we run cpuid just the 1st time, copy the results */ + if (DO_BIC(BIC_APIC)) + new->apic_id = old->apic_id; + if (DO_BIC(BIC_X2APIC)) + new->x2apic_id = old->x2apic_id; + + /* + * the timestamps from start of measurement interval are in "old" + * the timestamp from end of measurement interval are in "new" + * over-write old w/ new so we can print end of interval values + */ + + timersub(&new->tv_begin, &old->tv_begin, &old->tv_delta); + old->tv_begin = new->tv_begin; + old->tv_end = new->tv_end; + + old->tsc = new->tsc - old->tsc; + + /* check for TSC < 1 Mcycles over interval */ + if (old->tsc < (1000 * 1000)) + errx(-3, "Insanely slow TSC rate, TSC stops in idle?\n" + "You can disable all c-states by booting with \"idle=poll\"\n" + "or just the deep ones with \"processor.max_cstate=1\""); + + old->c1 = new->c1 - old->c1; + + if (DO_BIC(BIC_Avg_MHz) || DO_BIC(BIC_Busy) || DO_BIC(BIC_Bzy_MHz) || + soft_c1_residency_display(BIC_Avg_MHz)) { + if ((new->aperf > old->aperf) && (new->mperf > old->mperf)) { + old->aperf = new->aperf - old->aperf; + old->mperf = new->mperf - old->mperf; + } else { + return -1; + } + } + + + if (use_c1_residency_msr) { + /* + * Some models have a dedicated C1 residency MSR, + * which should be more accurate than the derivation below. + */ + } else { + /* + * As counter collection is not atomic, + * it is possible for mperf's non-halted cycles + idle states + * to exceed TSC's all cycles: show c1 = 0% in that case. + */ + if ((old->mperf + core_delta->c3 + core_delta->c6 + core_delta->c7) > (old->tsc * tsc_tweak)) + old->c1 = 0; + else { + /* normal case, derive c1 */ + old->c1 = (old->tsc * tsc_tweak) - old->mperf - core_delta->c3 + - core_delta->c6 - core_delta->c7; + } + } + + if (old->mperf == 0) { + if (debug > 1) + fprintf(outf, "cpu%d MPERF 0!\n", old->cpu_id); + old->mperf = 1; /* divide by 0 protection */ + } + + if (DO_BIC(BIC_IRQ)) + old->irq_count = new->irq_count - old->irq_count; + + if (DO_BIC(BIC_SMI)) + old->smi_count = new->smi_count - old->smi_count; + + for (i = 0, mp = sys.tp; mp; i++, mp = mp->next) { + if (mp->format == FORMAT_RAW) + old->counter[i] = new->counter[i]; + else + old->counter[i] = new->counter[i] - old->counter[i]; + } + return 0; +} + +int delta_cpu(struct thread_data *t, struct core_data *c, + struct pkg_data *p, struct thread_data *t2, + struct core_data *c2, struct pkg_data *p2) +{ + int retval = 0; + + /* calculate core delta only for 1st thread in core */ + if (t->flags & CPU_IS_FIRST_THREAD_IN_CORE) + delta_core(c, c2); + + /* always calculate thread delta */ + retval = delta_thread(t, t2, c2); /* c2 is core delta */ + if (retval) + return retval; + + /* calculate package delta only for 1st core in package */ + if (t->flags & CPU_IS_FIRST_CORE_IN_PACKAGE) + retval = delta_package(p, p2); + + return retval; +} + +void clear_counters(struct thread_data *t, struct core_data *c, struct pkg_data *p) +{ + int i; + struct msr_counter *mp; + + t->tv_begin.tv_sec = 0; + t->tv_begin.tv_usec = 0; + t->tv_end.tv_sec = 0; + t->tv_end.tv_usec = 0; + t->tv_delta.tv_sec = 0; + t->tv_delta.tv_usec = 0; + + t->tsc = 0; + t->aperf = 0; + t->mperf = 0; + t->c1 = 0; + + t->irq_count = 0; + t->smi_count = 0; + + /* tells format_counters to dump all fields from this set */ + t->flags = CPU_IS_FIRST_THREAD_IN_CORE | CPU_IS_FIRST_CORE_IN_PACKAGE; + + c->c3 = 0; + c->c6 = 0; + c->c7 = 0; + c->mc6_us = 0; + c->core_temp_c = 0; + c->core_energy = 0; + + p->pkg_wtd_core_c0 = 0; + p->pkg_any_core_c0 = 0; + p->pkg_any_gfxe_c0 = 0; + p->pkg_both_core_gfxe_c0 = 0; + + p->pc2 = 0; + if (DO_BIC(BIC_Pkgpc3)) + p->pc3 = 0; + if (DO_BIC(BIC_Pkgpc6)) + p->pc6 = 0; + if (DO_BIC(BIC_Pkgpc7)) + p->pc7 = 0; + p->pc8 = 0; + p->pc9 = 0; + p->pc10 = 0; + p->cpu_lpi = 0; + p->sys_lpi = 0; + + p->energy_pkg = 0; + p->energy_dram = 0; + p->energy_cores = 0; + p->energy_gfx = 0; + p->rapl_pkg_perf_status = 0; + p->rapl_dram_perf_status = 0; + p->pkg_temp_c = 0; + + p->gfx_rc6_ms = 0; + p->gfx_mhz = 0; + p->gfx_act_mhz = 0; + for (i = 0, mp = sys.tp; mp; i++, mp = mp->next) + t->counter[i] = 0; + + for (i = 0, mp = sys.cp; mp; i++, mp = mp->next) + c->counter[i] = 0; + + for (i = 0, mp = sys.pp; mp; i++, mp = mp->next) + p->counter[i] = 0; +} +int sum_counters(struct thread_data *t, struct core_data *c, + struct pkg_data *p) +{ + int i; + struct msr_counter *mp; + + /* copy un-changing apic_id's */ + if (DO_BIC(BIC_APIC)) + average.threads.apic_id = t->apic_id; + if (DO_BIC(BIC_X2APIC)) + average.threads.x2apic_id = t->x2apic_id; + + /* remember first tv_begin */ + if (average.threads.tv_begin.tv_sec == 0) + average.threads.tv_begin = t->tv_begin; + + /* remember last tv_end */ + average.threads.tv_end = t->tv_end; + + average.threads.tsc += t->tsc; + average.threads.aperf += t->aperf; + average.threads.mperf += t->mperf; + average.threads.c1 += t->c1; + + average.threads.irq_count += t->irq_count; + average.threads.smi_count += t->smi_count; + + for (i = 0, mp = sys.tp; mp; i++, mp = mp->next) { + if (mp->format == FORMAT_RAW) + continue; + average.threads.counter[i] += t->counter[i]; + } + + /* sum per-core values only for 1st thread in core */ + if (!(t->flags & CPU_IS_FIRST_THREAD_IN_CORE)) + return 0; + + average.cores.c3 += c->c3; + average.cores.c6 += c->c6; + average.cores.c7 += c->c7; + average.cores.mc6_us += c->mc6_us; + + average.cores.core_temp_c = MAX(average.cores.core_temp_c, c->core_temp_c); + + average.cores.core_energy += c->core_energy; + + for (i = 0, mp = sys.cp; mp; i++, mp = mp->next) { + if (mp->format == FORMAT_RAW) + continue; + average.cores.counter[i] += c->counter[i]; + } + + /* sum per-pkg values only for 1st core in pkg */ + if (!(t->flags & CPU_IS_FIRST_CORE_IN_PACKAGE)) + return 0; + + if (DO_BIC(BIC_Totl_c0)) + average.packages.pkg_wtd_core_c0 += p->pkg_wtd_core_c0; + if (DO_BIC(BIC_Any_c0)) + average.packages.pkg_any_core_c0 += p->pkg_any_core_c0; + if (DO_BIC(BIC_GFX_c0)) + average.packages.pkg_any_gfxe_c0 += p->pkg_any_gfxe_c0; + if (DO_BIC(BIC_CPUGFX)) + average.packages.pkg_both_core_gfxe_c0 += p->pkg_both_core_gfxe_c0; + + average.packages.pc2 += p->pc2; + if (DO_BIC(BIC_Pkgpc3)) + average.packages.pc3 += p->pc3; + if (DO_BIC(BIC_Pkgpc6)) + average.packages.pc6 += p->pc6; + if (DO_BIC(BIC_Pkgpc7)) + average.packages.pc7 += p->pc7; + average.packages.pc8 += p->pc8; + average.packages.pc9 += p->pc9; + average.packages.pc10 += p->pc10; + + average.packages.cpu_lpi = p->cpu_lpi; + average.packages.sys_lpi = p->sys_lpi; + + average.packages.energy_pkg += p->energy_pkg; + average.packages.energy_dram += p->energy_dram; + average.packages.energy_cores += p->energy_cores; + average.packages.energy_gfx += p->energy_gfx; + + average.packages.gfx_rc6_ms = p->gfx_rc6_ms; + average.packages.gfx_mhz = p->gfx_mhz; + average.packages.gfx_act_mhz = p->gfx_act_mhz; + + average.packages.pkg_temp_c = MAX(average.packages.pkg_temp_c, p->pkg_temp_c); + + average.packages.rapl_pkg_perf_status += p->rapl_pkg_perf_status; + average.packages.rapl_dram_perf_status += p->rapl_dram_perf_status; + + for (i = 0, mp = sys.pp; mp; i++, mp = mp->next) { + if (mp->format == FORMAT_RAW) + continue; + average.packages.counter[i] += p->counter[i]; + } + return 0; +} +/* + * sum the counters for all cpus in the system + * compute the weighted average + */ +void compute_average(struct thread_data *t, struct core_data *c, + struct pkg_data *p) +{ + int i; + struct msr_counter *mp; + + clear_counters(&average.threads, &average.cores, &average.packages); + + for_all_cpus(sum_counters, t, c, p); + + /* Use the global time delta for the average. */ + average.threads.tv_delta = tv_delta; + + average.threads.tsc /= topo.num_cpus; + average.threads.aperf /= topo.num_cpus; + average.threads.mperf /= topo.num_cpus; + average.threads.c1 /= topo.num_cpus; + + if (average.threads.irq_count > 9999999) + sums_need_wide_columns = 1; + + average.cores.c3 /= topo.num_cores; + average.cores.c6 /= topo.num_cores; + average.cores.c7 /= topo.num_cores; + average.cores.mc6_us /= topo.num_cores; + + if (DO_BIC(BIC_Totl_c0)) + average.packages.pkg_wtd_core_c0 /= topo.num_packages; + if (DO_BIC(BIC_Any_c0)) + average.packages.pkg_any_core_c0 /= topo.num_packages; + if (DO_BIC(BIC_GFX_c0)) + average.packages.pkg_any_gfxe_c0 /= topo.num_packages; + if (DO_BIC(BIC_CPUGFX)) + average.packages.pkg_both_core_gfxe_c0 /= topo.num_packages; + + average.packages.pc2 /= topo.num_packages; + if (DO_BIC(BIC_Pkgpc3)) + average.packages.pc3 /= topo.num_packages; + if (DO_BIC(BIC_Pkgpc6)) + average.packages.pc6 /= topo.num_packages; + if (DO_BIC(BIC_Pkgpc7)) + average.packages.pc7 /= topo.num_packages; + + average.packages.pc8 /= topo.num_packages; + average.packages.pc9 /= topo.num_packages; + average.packages.pc10 /= topo.num_packages; + + for (i = 0, mp = sys.tp; mp; i++, mp = mp->next) { + if (mp->format == FORMAT_RAW) + continue; + if (mp->type == COUNTER_ITEMS) { + if (average.threads.counter[i] > 9999999) + sums_need_wide_columns = 1; + continue; + } + average.threads.counter[i] /= topo.num_cpus; + } + for (i = 0, mp = sys.cp; mp; i++, mp = mp->next) { + if (mp->format == FORMAT_RAW) + continue; + if (mp->type == COUNTER_ITEMS) { + if (average.cores.counter[i] > 9999999) + sums_need_wide_columns = 1; + } + average.cores.counter[i] /= topo.num_cores; + } + for (i = 0, mp = sys.pp; mp; i++, mp = mp->next) { + if (mp->format == FORMAT_RAW) + continue; + if (mp->type == COUNTER_ITEMS) { + if (average.packages.counter[i] > 9999999) + sums_need_wide_columns = 1; + } + average.packages.counter[i] /= topo.num_packages; + } +} + +static unsigned long long rdtsc(void) +{ + unsigned int low, high; + + asm volatile("rdtsc" : "=a" (low), "=d" (high)); + + return low | ((unsigned long long)high) << 32; +} + +/* + * Open a file, and exit on failure + */ +FILE *fopen_or_die(const char *path, const char *mode) +{ + FILE *filep = fopen(path, mode); + + if (!filep) + err(1, "%s: open failed", path); + return filep; +} +/* + * snapshot_sysfs_counter() + * + * return snapshot of given counter + */ +unsigned long long snapshot_sysfs_counter(char *path) +{ + FILE *fp; + int retval; + unsigned long long counter; + + fp = fopen_or_die(path, "r"); + + retval = fscanf(fp, "%lld", &counter); + if (retval != 1) + err(1, "snapshot_sysfs_counter(%s)", path); + + fclose(fp); + + return counter; +} + +int get_mp(int cpu, struct msr_counter *mp, unsigned long long *counterp) +{ + if (mp->msr_num != 0) { + if (get_msr(cpu, mp->msr_num, counterp)) + return -1; + } else { + char path[128 + PATH_BYTES]; + + if (mp->flags & SYSFS_PERCPU) { + sprintf(path, "/sys/devices/system/cpu/cpu%d/%s", + cpu, mp->path); + + *counterp = snapshot_sysfs_counter(path); + } else { + *counterp = snapshot_sysfs_counter(mp->path); + } + } + + return 0; +} + +void get_apic_id(struct thread_data *t) +{ + unsigned int eax, ebx, ecx, edx; + + if (DO_BIC(BIC_APIC)) { + eax = ebx = ecx = edx = 0; + __cpuid(1, eax, ebx, ecx, edx); + + t->apic_id = (ebx >> 24) & 0xff; + } + + if (!DO_BIC(BIC_X2APIC)) + return; + + if (authentic_amd || hygon_genuine) { + unsigned int topology_extensions; + + if (max_extended_level < 0x8000001e) + return; + + eax = ebx = ecx = edx = 0; + __cpuid(0x80000001, eax, ebx, ecx, edx); + topology_extensions = ecx & (1 << 22); + + if (topology_extensions == 0) + return; + + eax = ebx = ecx = edx = 0; + __cpuid(0x8000001e, eax, ebx, ecx, edx); + + t->x2apic_id = eax; + return; + } + + if (!genuine_intel) + return; + + if (max_level < 0xb) + return; + + ecx = 0; + __cpuid(0xb, eax, ebx, ecx, edx); + t->x2apic_id = edx; + + if (debug && (t->apic_id != (t->x2apic_id & 0xff))) + fprintf(outf, "cpu%d: BIOS BUG: apic 0x%x x2apic 0x%x\n", + t->cpu_id, t->apic_id, t->x2apic_id); +} + +/* + * get_counters(...) + * migrate to cpu + * acquire and record local counters for that cpu + */ +int get_counters(struct thread_data *t, struct core_data *c, struct pkg_data *p) +{ + int cpu = t->cpu_id; + unsigned long long msr; + int aperf_mperf_retry_count = 0; + struct msr_counter *mp; + int i; + + if (cpu_migrate(cpu)) { + fprintf(outf, "get_counters: Could not migrate to CPU %d\n", cpu); + return -1; + } + + gettimeofday(&t->tv_begin, (struct timezone *)NULL); + + if (first_counter_read) + get_apic_id(t); +retry: + t->tsc = rdtsc(); /* we are running on local CPU of interest */ + + if (DO_BIC(BIC_Avg_MHz) || DO_BIC(BIC_Busy) || DO_BIC(BIC_Bzy_MHz) || + soft_c1_residency_display(BIC_Avg_MHz)) { + unsigned long long tsc_before, tsc_between, tsc_after, aperf_time, mperf_time; + + /* + * The TSC, APERF and MPERF must be read together for + * APERF/MPERF and MPERF/TSC to give accurate results. + * + * Unfortunately, APERF and MPERF are read by + * individual system call, so delays may occur + * between them. If the time to read them + * varies by a large amount, we re-read them. + */ + + /* + * This initial dummy APERF read has been seen to + * reduce jitter in the subsequent reads. + */ + + if (get_msr(cpu, MSR_IA32_APERF, &t->aperf)) + return -3; + + t->tsc = rdtsc(); /* re-read close to APERF */ + + tsc_before = t->tsc; + + if (get_msr(cpu, MSR_IA32_APERF, &t->aperf)) + return -3; + + tsc_between = rdtsc(); + + if (get_msr(cpu, MSR_IA32_MPERF, &t->mperf)) + return -4; + + tsc_after = rdtsc(); + + aperf_time = tsc_between - tsc_before; + mperf_time = tsc_after - tsc_between; + + /* + * If the system call latency to read APERF and MPERF + * differ by more than 2x, then try again. + */ + if ((aperf_time > (2 * mperf_time)) || (mperf_time > (2 * aperf_time))) { + aperf_mperf_retry_count++; + if (aperf_mperf_retry_count < 5) + goto retry; + else + warnx("cpu%d jitter %lld %lld", + cpu, aperf_time, mperf_time); + } + aperf_mperf_retry_count = 0; + + t->aperf = t->aperf * aperf_mperf_multiplier; + t->mperf = t->mperf * aperf_mperf_multiplier; + } + + if (DO_BIC(BIC_IRQ)) + t->irq_count = irqs_per_cpu[cpu]; + if (DO_BIC(BIC_SMI)) { + if (get_msr(cpu, MSR_SMI_COUNT, &msr)) + return -5; + t->smi_count = msr & 0xFFFFFFFF; + } + if (DO_BIC(BIC_CPU_c1) && use_c1_residency_msr) { + if (get_msr(cpu, MSR_CORE_C1_RES, &t->c1)) + return -6; + } + + for (i = 0, mp = sys.tp; mp; i++, mp = mp->next) { + if (get_mp(cpu, mp, &t->counter[i])) + return -10; + } + + /* collect core counters only for 1st thread in core */ + if (!(t->flags & CPU_IS_FIRST_THREAD_IN_CORE)) + goto done; + + if (DO_BIC(BIC_CPU_c3) || soft_c1_residency_display(BIC_CPU_c3)) { + if (get_msr(cpu, MSR_CORE_C3_RESIDENCY, &c->c3)) + return -6; + } + + if ((DO_BIC(BIC_CPU_c6) || soft_c1_residency_display(BIC_CPU_c6)) && !do_knl_cstates) { + if (get_msr(cpu, MSR_CORE_C6_RESIDENCY, &c->c6)) + return -7; + } else if (do_knl_cstates && soft_c1_residency_display(BIC_CPU_c6)) { + if (get_msr(cpu, MSR_KNL_CORE_C6_RESIDENCY, &c->c6)) + return -7; + } + + if (DO_BIC(BIC_CPU_c7) || soft_c1_residency_display(BIC_CPU_c7)) + if (get_msr(cpu, MSR_CORE_C7_RESIDENCY, &c->c7)) + return -8; + + if (DO_BIC(BIC_Mod_c6)) + if (get_msr(cpu, MSR_MODULE_C6_RES_MS, &c->mc6_us)) + return -8; + + if (DO_BIC(BIC_CoreTmp)) { + if (get_msr(cpu, MSR_IA32_THERM_STATUS, &msr)) + return -9; + c->core_temp_c = tcc_activation_temp - ((msr >> 16) & 0x7F); + } + + if (do_rapl & RAPL_AMD_F17H) { + if (get_msr(cpu, MSR_CORE_ENERGY_STAT, &msr)) + return -14; + c->core_energy = msr & 0xFFFFFFFF; + } + + for (i = 0, mp = sys.cp; mp; i++, mp = mp->next) { + if (get_mp(cpu, mp, &c->counter[i])) + return -10; + } + + /* collect package counters only for 1st core in package */ + if (!(t->flags & CPU_IS_FIRST_CORE_IN_PACKAGE)) + goto done; + + if (DO_BIC(BIC_Totl_c0)) { + if (get_msr(cpu, MSR_PKG_WEIGHTED_CORE_C0_RES, &p->pkg_wtd_core_c0)) + return -10; + } + if (DO_BIC(BIC_Any_c0)) { + if (get_msr(cpu, MSR_PKG_ANY_CORE_C0_RES, &p->pkg_any_core_c0)) + return -11; + } + if (DO_BIC(BIC_GFX_c0)) { + if (get_msr(cpu, MSR_PKG_ANY_GFXE_C0_RES, &p->pkg_any_gfxe_c0)) + return -12; + } + if (DO_BIC(BIC_CPUGFX)) { + if (get_msr(cpu, MSR_PKG_BOTH_CORE_GFXE_C0_RES, &p->pkg_both_core_gfxe_c0)) + return -13; + } + if (DO_BIC(BIC_Pkgpc3)) + if (get_msr(cpu, MSR_PKG_C3_RESIDENCY, &p->pc3)) + return -9; + if (DO_BIC(BIC_Pkgpc6)) { + if (do_slm_cstates) { + if (get_msr(cpu, MSR_ATOM_PKG_C6_RESIDENCY, &p->pc6)) + return -10; + } else { + if (get_msr(cpu, MSR_PKG_C6_RESIDENCY, &p->pc6)) + return -10; + } + } + + if (DO_BIC(BIC_Pkgpc2)) + if (get_msr(cpu, MSR_PKG_C2_RESIDENCY, &p->pc2)) + return -11; + if (DO_BIC(BIC_Pkgpc7)) + if (get_msr(cpu, MSR_PKG_C7_RESIDENCY, &p->pc7)) + return -12; + if (DO_BIC(BIC_Pkgpc8)) + if (get_msr(cpu, MSR_PKG_C8_RESIDENCY, &p->pc8)) + return -13; + if (DO_BIC(BIC_Pkgpc9)) + if (get_msr(cpu, MSR_PKG_C9_RESIDENCY, &p->pc9)) + return -13; + if (DO_BIC(BIC_Pkgpc10)) + if (get_msr(cpu, MSR_PKG_C10_RESIDENCY, &p->pc10)) + return -13; + + if (DO_BIC(BIC_CPU_LPI)) + p->cpu_lpi = cpuidle_cur_cpu_lpi_us; + if (DO_BIC(BIC_SYS_LPI)) + p->sys_lpi = cpuidle_cur_sys_lpi_us; + + if (do_rapl & RAPL_PKG) { + if (get_msr_sum(cpu, MSR_PKG_ENERGY_STATUS, &msr)) + return -13; + p->energy_pkg = msr; + } + if (do_rapl & RAPL_CORES_ENERGY_STATUS) { + if (get_msr_sum(cpu, MSR_PP0_ENERGY_STATUS, &msr)) + return -14; + p->energy_cores = msr; + } + if (do_rapl & RAPL_DRAM) { + if (get_msr_sum(cpu, MSR_DRAM_ENERGY_STATUS, &msr)) + return -15; + p->energy_dram = msr; + } + if (do_rapl & RAPL_GFX) { + if (get_msr_sum(cpu, MSR_PP1_ENERGY_STATUS, &msr)) + return -16; + p->energy_gfx = msr; + } + if (do_rapl & RAPL_PKG_PERF_STATUS) { + if (get_msr_sum(cpu, MSR_PKG_PERF_STATUS, &msr)) + return -16; + p->rapl_pkg_perf_status = msr; + } + if (do_rapl & RAPL_DRAM_PERF_STATUS) { + if (get_msr_sum(cpu, MSR_DRAM_PERF_STATUS, &msr)) + return -16; + p->rapl_dram_perf_status = msr; + } + if (do_rapl & RAPL_AMD_F17H) { + if (get_msr_sum(cpu, MSR_PKG_ENERGY_STAT, &msr)) + return -13; + p->energy_pkg = msr; + } + if (DO_BIC(BIC_PkgTmp)) { + if (get_msr(cpu, MSR_IA32_PACKAGE_THERM_STATUS, &msr)) + return -17; + p->pkg_temp_c = tcc_activation_temp - ((msr >> 16) & 0x7F); + } + + if (DO_BIC(BIC_GFX_rc6)) + p->gfx_rc6_ms = gfx_cur_rc6_ms; + + if (DO_BIC(BIC_GFXMHz)) + p->gfx_mhz = gfx_cur_mhz; + + if (DO_BIC(BIC_GFXACTMHz)) + p->gfx_act_mhz = gfx_act_mhz; + + for (i = 0, mp = sys.pp; mp; i++, mp = mp->next) { + if (get_mp(cpu, mp, &p->counter[i])) + return -10; + } +done: + gettimeofday(&t->tv_end, (struct timezone *)NULL); + + return 0; +} + +/* + * MSR_PKG_CST_CONFIG_CONTROL decoding for pkg_cstate_limit: + * If you change the values, note they are used both in comparisons + * (>= PCL__7) and to index pkg_cstate_limit_strings[]. + */ + +#define PCLUKN 0 /* Unknown */ +#define PCLRSV 1 /* Reserved */ +#define PCL__0 2 /* PC0 */ +#define PCL__1 3 /* PC1 */ +#define PCL__2 4 /* PC2 */ +#define PCL__3 5 /* PC3 */ +#define PCL__4 6 /* PC4 */ +#define PCL__6 7 /* PC6 */ +#define PCL_6N 8 /* PC6 No Retention */ +#define PCL_6R 9 /* PC6 Retention */ +#define PCL__7 10 /* PC7 */ +#define PCL_7S 11 /* PC7 Shrink */ +#define PCL__8 12 /* PC8 */ +#define PCL__9 13 /* PC9 */ +#define PCL_10 14 /* PC10 */ +#define PCLUNL 15 /* Unlimited */ + +int pkg_cstate_limit = PCLUKN; +char *pkg_cstate_limit_strings[] = { "reserved", "unknown", "pc0", "pc1", "pc2", + "pc3", "pc4", "pc6", "pc6n", "pc6r", "pc7", "pc7s", "pc8", "pc9", "pc10", "unlimited"}; + +int nhm_pkg_cstate_limits[16] = {PCL__0, PCL__1, PCL__3, PCL__6, PCL__7, PCLRSV, PCLRSV, PCLUNL, PCLRSV, PCLRSV, PCLRSV, PCLRSV, PCLRSV, PCLRSV, PCLRSV, PCLRSV}; +int snb_pkg_cstate_limits[16] = {PCL__0, PCL__2, PCL_6N, PCL_6R, PCL__7, PCL_7S, PCLRSV, PCLUNL, PCLRSV, PCLRSV, PCLRSV, PCLRSV, PCLRSV, PCLRSV, PCLRSV, PCLRSV}; +int hsw_pkg_cstate_limits[16] = {PCL__0, PCL__2, PCL__3, PCL__6, PCL__7, PCL_7S, PCL__8, PCL__9, PCLUNL, PCLRSV, PCLRSV, PCLRSV, PCLRSV, PCLRSV, PCLRSV, PCLRSV}; +int slv_pkg_cstate_limits[16] = {PCL__0, PCL__1, PCLRSV, PCLRSV, PCL__4, PCLRSV, PCL__6, PCL__7, PCLRSV, PCLRSV, PCLRSV, PCLRSV, PCLRSV, PCLRSV, PCL__6, PCL__7}; +int amt_pkg_cstate_limits[16] = {PCLUNL, PCL__1, PCL__2, PCLRSV, PCLRSV, PCLRSV, PCL__6, PCL__7, PCLRSV, PCLRSV, PCLRSV, PCLRSV, PCLRSV, PCLRSV, PCLRSV, PCLRSV}; +int phi_pkg_cstate_limits[16] = {PCL__0, PCL__2, PCL_6N, PCL_6R, PCLRSV, PCLRSV, PCLRSV, PCLUNL, PCLRSV, PCLRSV, PCLRSV, PCLRSV, PCLRSV, PCLRSV, PCLRSV, PCLRSV}; +int glm_pkg_cstate_limits[16] = {PCLUNL, PCL__1, PCL__3, PCL__6, PCL__7, PCL_7S, PCL__8, PCL__9, PCL_10, PCLRSV, PCLRSV, PCLRSV, PCLRSV, PCLRSV, PCLRSV, PCLRSV}; +int skx_pkg_cstate_limits[16] = {PCL__0, PCL__2, PCL_6N, PCL_6R, PCLRSV, PCLRSV, PCLRSV, PCLUNL, PCLRSV, PCLRSV, PCLRSV, PCLRSV, PCLRSV, PCLRSV, PCLRSV, PCLRSV}; + + +static void +calculate_tsc_tweak() +{ + tsc_tweak = base_hz / tsc_hz; +} + +static void +dump_nhm_platform_info(void) +{ + unsigned long long msr; + unsigned int ratio; + + get_msr(base_cpu, MSR_PLATFORM_INFO, &msr); + + fprintf(outf, "cpu%d: MSR_PLATFORM_INFO: 0x%08llx\n", base_cpu, msr); + + ratio = (msr >> 40) & 0xFF; + fprintf(outf, "%d * %.1f = %.1f MHz max efficiency frequency\n", + ratio, bclk, ratio * bclk); + + ratio = (msr >> 8) & 0xFF; + fprintf(outf, "%d * %.1f = %.1f MHz base frequency\n", + ratio, bclk, ratio * bclk); + + get_msr(base_cpu, MSR_IA32_POWER_CTL, &msr); + fprintf(outf, "cpu%d: MSR_IA32_POWER_CTL: 0x%08llx (C1E auto-promotion: %sabled)\n", + base_cpu, msr, msr & 0x2 ? "EN" : "DIS"); + + return; +} + +static void +dump_hsw_turbo_ratio_limits(void) +{ + unsigned long long msr; + unsigned int ratio; + + get_msr(base_cpu, MSR_TURBO_RATIO_LIMIT2, &msr); + + fprintf(outf, "cpu%d: MSR_TURBO_RATIO_LIMIT2: 0x%08llx\n", base_cpu, msr); + + ratio = (msr >> 8) & 0xFF; + if (ratio) + fprintf(outf, "%d * %.1f = %.1f MHz max turbo 18 active cores\n", + ratio, bclk, ratio * bclk); + + ratio = (msr >> 0) & 0xFF; + if (ratio) + fprintf(outf, "%d * %.1f = %.1f MHz max turbo 17 active cores\n", + ratio, bclk, ratio * bclk); + return; +} + +static void +dump_ivt_turbo_ratio_limits(void) +{ + unsigned long long msr; + unsigned int ratio; + + get_msr(base_cpu, MSR_TURBO_RATIO_LIMIT1, &msr); + + fprintf(outf, "cpu%d: MSR_TURBO_RATIO_LIMIT1: 0x%08llx\n", base_cpu, msr); + + ratio = (msr >> 56) & 0xFF; + if (ratio) + fprintf(outf, "%d * %.1f = %.1f MHz max turbo 16 active cores\n", + ratio, bclk, ratio * bclk); + + ratio = (msr >> 48) & 0xFF; + if (ratio) + fprintf(outf, "%d * %.1f = %.1f MHz max turbo 15 active cores\n", + ratio, bclk, ratio * bclk); + + ratio = (msr >> 40) & 0xFF; + if (ratio) + fprintf(outf, "%d * %.1f = %.1f MHz max turbo 14 active cores\n", + ratio, bclk, ratio * bclk); + + ratio = (msr >> 32) & 0xFF; + if (ratio) + fprintf(outf, "%d * %.1f = %.1f MHz max turbo 13 active cores\n", + ratio, bclk, ratio * bclk); + + ratio = (msr >> 24) & 0xFF; + if (ratio) + fprintf(outf, "%d * %.1f = %.1f MHz max turbo 12 active cores\n", + ratio, bclk, ratio * bclk); + + ratio = (msr >> 16) & 0xFF; + if (ratio) + fprintf(outf, "%d * %.1f = %.1f MHz max turbo 11 active cores\n", + ratio, bclk, ratio * bclk); + + ratio = (msr >> 8) & 0xFF; + if (ratio) + fprintf(outf, "%d * %.1f = %.1f MHz max turbo 10 active cores\n", + ratio, bclk, ratio * bclk); + + ratio = (msr >> 0) & 0xFF; + if (ratio) + fprintf(outf, "%d * %.1f = %.1f MHz max turbo 9 active cores\n", + ratio, bclk, ratio * bclk); + return; +} +int has_turbo_ratio_group_limits(int family, int model) +{ + + if (!genuine_intel) + return 0; + + switch (model) { + case INTEL_FAM6_ATOM_GOLDMONT: + case INTEL_FAM6_SKYLAKE_X: + case INTEL_FAM6_ATOM_GOLDMONT_D: + case INTEL_FAM6_ATOM_TREMONT_D: + return 1; + } + return 0; +} + +static void +dump_turbo_ratio_limits(int family, int model) +{ + unsigned long long msr, core_counts; + unsigned int ratio, group_size; + + get_msr(base_cpu, MSR_TURBO_RATIO_LIMIT, &msr); + fprintf(outf, "cpu%d: MSR_TURBO_RATIO_LIMIT: 0x%08llx\n", base_cpu, msr); + + if (has_turbo_ratio_group_limits(family, model)) { + get_msr(base_cpu, MSR_TURBO_RATIO_LIMIT1, &core_counts); + fprintf(outf, "cpu%d: MSR_TURBO_RATIO_LIMIT1: 0x%08llx\n", base_cpu, core_counts); + } else { + core_counts = 0x0807060504030201; + } + + ratio = (msr >> 56) & 0xFF; + group_size = (core_counts >> 56) & 0xFF; + if (ratio) + fprintf(outf, "%d * %.1f = %.1f MHz max turbo %d active cores\n", + ratio, bclk, ratio * bclk, group_size); + + ratio = (msr >> 48) & 0xFF; + group_size = (core_counts >> 48) & 0xFF; + if (ratio) + fprintf(outf, "%d * %.1f = %.1f MHz max turbo %d active cores\n", + ratio, bclk, ratio * bclk, group_size); + + ratio = (msr >> 40) & 0xFF; + group_size = (core_counts >> 40) & 0xFF; + if (ratio) + fprintf(outf, "%d * %.1f = %.1f MHz max turbo %d active cores\n", + ratio, bclk, ratio * bclk, group_size); + + ratio = (msr >> 32) & 0xFF; + group_size = (core_counts >> 32) & 0xFF; + if (ratio) + fprintf(outf, "%d * %.1f = %.1f MHz max turbo %d active cores\n", + ratio, bclk, ratio * bclk, group_size); + + ratio = (msr >> 24) & 0xFF; + group_size = (core_counts >> 24) & 0xFF; + if (ratio) + fprintf(outf, "%d * %.1f = %.1f MHz max turbo %d active cores\n", + ratio, bclk, ratio * bclk, group_size); + + ratio = (msr >> 16) & 0xFF; + group_size = (core_counts >> 16) & 0xFF; + if (ratio) + fprintf(outf, "%d * %.1f = %.1f MHz max turbo %d active cores\n", + ratio, bclk, ratio * bclk, group_size); + + ratio = (msr >> 8) & 0xFF; + group_size = (core_counts >> 8) & 0xFF; + if (ratio) + fprintf(outf, "%d * %.1f = %.1f MHz max turbo %d active cores\n", + ratio, bclk, ratio * bclk, group_size); + + ratio = (msr >> 0) & 0xFF; + group_size = (core_counts >> 0) & 0xFF; + if (ratio) + fprintf(outf, "%d * %.1f = %.1f MHz max turbo %d active cores\n", + ratio, bclk, ratio * bclk, group_size); + return; +} + +static void +dump_atom_turbo_ratio_limits(void) +{ + unsigned long long msr; + unsigned int ratio; + + get_msr(base_cpu, MSR_ATOM_CORE_RATIOS, &msr); + fprintf(outf, "cpu%d: MSR_ATOM_CORE_RATIOS: 0x%08llx\n", base_cpu, msr & 0xFFFFFFFF); + + ratio = (msr >> 0) & 0x3F; + if (ratio) + fprintf(outf, "%d * %.1f = %.1f MHz minimum operating frequency\n", + ratio, bclk, ratio * bclk); + + ratio = (msr >> 8) & 0x3F; + if (ratio) + fprintf(outf, "%d * %.1f = %.1f MHz low frequency mode (LFM)\n", + ratio, bclk, ratio * bclk); + + ratio = (msr >> 16) & 0x3F; + if (ratio) + fprintf(outf, "%d * %.1f = %.1f MHz base frequency\n", + ratio, bclk, ratio * bclk); + + get_msr(base_cpu, MSR_ATOM_CORE_TURBO_RATIOS, &msr); + fprintf(outf, "cpu%d: MSR_ATOM_CORE_TURBO_RATIOS: 0x%08llx\n", base_cpu, msr & 0xFFFFFFFF); + + ratio = (msr >> 24) & 0x3F; + if (ratio) + fprintf(outf, "%d * %.1f = %.1f MHz max turbo 4 active cores\n", + ratio, bclk, ratio * bclk); + + ratio = (msr >> 16) & 0x3F; + if (ratio) + fprintf(outf, "%d * %.1f = %.1f MHz max turbo 3 active cores\n", + ratio, bclk, ratio * bclk); + + ratio = (msr >> 8) & 0x3F; + if (ratio) + fprintf(outf, "%d * %.1f = %.1f MHz max turbo 2 active cores\n", + ratio, bclk, ratio * bclk); + + ratio = (msr >> 0) & 0x3F; + if (ratio) + fprintf(outf, "%d * %.1f = %.1f MHz max turbo 1 active core\n", + ratio, bclk, ratio * bclk); +} + +static void +dump_knl_turbo_ratio_limits(void) +{ + const unsigned int buckets_no = 7; + + unsigned long long msr; + int delta_cores, delta_ratio; + int i, b_nr; + unsigned int cores[buckets_no]; + unsigned int ratio[buckets_no]; + + get_msr(base_cpu, MSR_TURBO_RATIO_LIMIT, &msr); + + fprintf(outf, "cpu%d: MSR_TURBO_RATIO_LIMIT: 0x%08llx\n", + base_cpu, msr); + + /** + * Turbo encoding in KNL is as follows: + * [0] -- Reserved + * [7:1] -- Base value of number of active cores of bucket 1. + * [15:8] -- Base value of freq ratio of bucket 1. + * [20:16] -- +ve delta of number of active cores of bucket 2. + * i.e. active cores of bucket 2 = + * active cores of bucket 1 + delta + * [23:21] -- Negative delta of freq ratio of bucket 2. + * i.e. freq ratio of bucket 2 = + * freq ratio of bucket 1 - delta + * [28:24]-- +ve delta of number of active cores of bucket 3. + * [31:29]-- -ve delta of freq ratio of bucket 3. + * [36:32]-- +ve delta of number of active cores of bucket 4. + * [39:37]-- -ve delta of freq ratio of bucket 4. + * [44:40]-- +ve delta of number of active cores of bucket 5. + * [47:45]-- -ve delta of freq ratio of bucket 5. + * [52:48]-- +ve delta of number of active cores of bucket 6. + * [55:53]-- -ve delta of freq ratio of bucket 6. + * [60:56]-- +ve delta of number of active cores of bucket 7. + * [63:61]-- -ve delta of freq ratio of bucket 7. + */ + + b_nr = 0; + cores[b_nr] = (msr & 0xFF) >> 1; + ratio[b_nr] = (msr >> 8) & 0xFF; + + for (i = 16; i < 64; i += 8) { + delta_cores = (msr >> i) & 0x1F; + delta_ratio = (msr >> (i + 5)) & 0x7; + + cores[b_nr + 1] = cores[b_nr] + delta_cores; + ratio[b_nr + 1] = ratio[b_nr] - delta_ratio; + b_nr++; + } + + for (i = buckets_no - 1; i >= 0; i--) + if (i > 0 ? ratio[i] != ratio[i - 1] : 1) + fprintf(outf, + "%d * %.1f = %.1f MHz max turbo %d active cores\n", + ratio[i], bclk, ratio[i] * bclk, cores[i]); +} + +static void +dump_nhm_cst_cfg(void) +{ + unsigned long long msr; + + get_msr(base_cpu, MSR_PKG_CST_CONFIG_CONTROL, &msr); + + fprintf(outf, "cpu%d: MSR_PKG_CST_CONFIG_CONTROL: 0x%08llx", base_cpu, msr); + + fprintf(outf, " (%s%s%s%s%slocked, pkg-cstate-limit=%d (%s)", + (msr & SNB_C3_AUTO_UNDEMOTE) ? "UNdemote-C3, " : "", + (msr & SNB_C1_AUTO_UNDEMOTE) ? "UNdemote-C1, " : "", + (msr & NHM_C3_AUTO_DEMOTE) ? "demote-C3, " : "", + (msr & NHM_C1_AUTO_DEMOTE) ? "demote-C1, " : "", + (msr & (1 << 15)) ? "" : "UN", + (unsigned int)msr & 0xF, + pkg_cstate_limit_strings[pkg_cstate_limit]); + +#define AUTOMATIC_CSTATE_CONVERSION (1UL << 16) + if (has_automatic_cstate_conversion) { + fprintf(outf, ", automatic c-state conversion=%s", + (msr & AUTOMATIC_CSTATE_CONVERSION) ? "on" : "off"); + } + + fprintf(outf, ")\n"); + + return; +} + +static void +dump_config_tdp(void) +{ + unsigned long long msr; + + get_msr(base_cpu, MSR_CONFIG_TDP_NOMINAL, &msr); + fprintf(outf, "cpu%d: MSR_CONFIG_TDP_NOMINAL: 0x%08llx", base_cpu, msr); + fprintf(outf, " (base_ratio=%d)\n", (unsigned int)msr & 0xFF); + + get_msr(base_cpu, MSR_CONFIG_TDP_LEVEL_1, &msr); + fprintf(outf, "cpu%d: MSR_CONFIG_TDP_LEVEL_1: 0x%08llx (", base_cpu, msr); + if (msr) { + fprintf(outf, "PKG_MIN_PWR_LVL1=%d ", (unsigned int)(msr >> 48) & 0x7FFF); + fprintf(outf, "PKG_MAX_PWR_LVL1=%d ", (unsigned int)(msr >> 32) & 0x7FFF); + fprintf(outf, "LVL1_RATIO=%d ", (unsigned int)(msr >> 16) & 0xFF); + fprintf(outf, "PKG_TDP_LVL1=%d", (unsigned int)(msr) & 0x7FFF); + } + fprintf(outf, ")\n"); + + get_msr(base_cpu, MSR_CONFIG_TDP_LEVEL_2, &msr); + fprintf(outf, "cpu%d: MSR_CONFIG_TDP_LEVEL_2: 0x%08llx (", base_cpu, msr); + if (msr) { + fprintf(outf, "PKG_MIN_PWR_LVL2=%d ", (unsigned int)(msr >> 48) & 0x7FFF); + fprintf(outf, "PKG_MAX_PWR_LVL2=%d ", (unsigned int)(msr >> 32) & 0x7FFF); + fprintf(outf, "LVL2_RATIO=%d ", (unsigned int)(msr >> 16) & 0xFF); + fprintf(outf, "PKG_TDP_LVL2=%d", (unsigned int)(msr) & 0x7FFF); + } + fprintf(outf, ")\n"); + + get_msr(base_cpu, MSR_CONFIG_TDP_CONTROL, &msr); + fprintf(outf, "cpu%d: MSR_CONFIG_TDP_CONTROL: 0x%08llx (", base_cpu, msr); + if ((msr) & 0x3) + fprintf(outf, "TDP_LEVEL=%d ", (unsigned int)(msr) & 0x3); + fprintf(outf, " lock=%d", (unsigned int)(msr >> 31) & 1); + fprintf(outf, ")\n"); + + get_msr(base_cpu, MSR_TURBO_ACTIVATION_RATIO, &msr); + fprintf(outf, "cpu%d: MSR_TURBO_ACTIVATION_RATIO: 0x%08llx (", base_cpu, msr); + fprintf(outf, "MAX_NON_TURBO_RATIO=%d", (unsigned int)(msr) & 0xFF); + fprintf(outf, " lock=%d", (unsigned int)(msr >> 31) & 1); + fprintf(outf, ")\n"); +} + +unsigned int irtl_time_units[] = {1, 32, 1024, 32768, 1048576, 33554432, 0, 0 }; + +void print_irtl(void) +{ + unsigned long long msr; + + get_msr(base_cpu, MSR_PKGC3_IRTL, &msr); + fprintf(outf, "cpu%d: MSR_PKGC3_IRTL: 0x%08llx (", base_cpu, msr); + fprintf(outf, "%svalid, %lld ns)\n", msr & (1 << 15) ? "" : "NOT", + (msr & 0x3FF) * irtl_time_units[(msr >> 10) & 0x3]); + + get_msr(base_cpu, MSR_PKGC6_IRTL, &msr); + fprintf(outf, "cpu%d: MSR_PKGC6_IRTL: 0x%08llx (", base_cpu, msr); + fprintf(outf, "%svalid, %lld ns)\n", msr & (1 << 15) ? "" : "NOT", + (msr & 0x3FF) * irtl_time_units[(msr >> 10) & 0x3]); + + get_msr(base_cpu, MSR_PKGC7_IRTL, &msr); + fprintf(outf, "cpu%d: MSR_PKGC7_IRTL: 0x%08llx (", base_cpu, msr); + fprintf(outf, "%svalid, %lld ns)\n", msr & (1 << 15) ? "" : "NOT", + (msr & 0x3FF) * irtl_time_units[(msr >> 10) & 0x3]); + + if (!do_irtl_hsw) + return; + + get_msr(base_cpu, MSR_PKGC8_IRTL, &msr); + fprintf(outf, "cpu%d: MSR_PKGC8_IRTL: 0x%08llx (", base_cpu, msr); + fprintf(outf, "%svalid, %lld ns)\n", msr & (1 << 15) ? "" : "NOT", + (msr & 0x3FF) * irtl_time_units[(msr >> 10) & 0x3]); + + get_msr(base_cpu, MSR_PKGC9_IRTL, &msr); + fprintf(outf, "cpu%d: MSR_PKGC9_IRTL: 0x%08llx (", base_cpu, msr); + fprintf(outf, "%svalid, %lld ns)\n", msr & (1 << 15) ? "" : "NOT", + (msr & 0x3FF) * irtl_time_units[(msr >> 10) & 0x3]); + + get_msr(base_cpu, MSR_PKGC10_IRTL, &msr); + fprintf(outf, "cpu%d: MSR_PKGC10_IRTL: 0x%08llx (", base_cpu, msr); + fprintf(outf, "%svalid, %lld ns)\n", msr & (1 << 15) ? "" : "NOT", + (msr & 0x3FF) * irtl_time_units[(msr >> 10) & 0x3]); + +} +void free_fd_percpu(void) +{ + int i; + + for (i = 0; i < topo.max_cpu_num + 1; ++i) { + if (fd_percpu[i] != 0) + close(fd_percpu[i]); + } + + free(fd_percpu); +} + +void free_all_buffers(void) +{ + int i; + + CPU_FREE(cpu_present_set); + cpu_present_set = NULL; + cpu_present_setsize = 0; + + CPU_FREE(cpu_affinity_set); + cpu_affinity_set = NULL; + cpu_affinity_setsize = 0; + + free(thread_even); + free(core_even); + free(package_even); + + thread_even = NULL; + core_even = NULL; + package_even = NULL; + + free(thread_odd); + free(core_odd); + free(package_odd); + + thread_odd = NULL; + core_odd = NULL; + package_odd = NULL; + + free(output_buffer); + output_buffer = NULL; + outp = NULL; + + free_fd_percpu(); + + free(irq_column_2_cpu); + free(irqs_per_cpu); + + for (i = 0; i <= topo.max_cpu_num; ++i) { + if (cpus[i].put_ids) + CPU_FREE(cpus[i].put_ids); + } + free(cpus); +} + + +/* + * Parse a file containing a single int. + * Return 0 if file can not be opened + * Exit if file can be opened, but can not be parsed + */ +int parse_int_file(const char *fmt, ...) +{ + va_list args; + char path[PATH_MAX]; + FILE *filep; + int value; + + va_start(args, fmt); + vsnprintf(path, sizeof(path), fmt, args); + va_end(args); + filep = fopen(path, "r"); + if (!filep) + return 0; + if (fscanf(filep, "%d", &value) != 1) + err(1, "%s: failed to parse number from file", path); + fclose(filep); + return value; +} + +/* + * cpu_is_first_core_in_package(cpu) + * return 1 if given CPU is 1st core in package + */ +int cpu_is_first_core_in_package(int cpu) +{ + return cpu == parse_int_file("/sys/devices/system/cpu/cpu%d/topology/core_siblings_list", cpu); +} + +int get_physical_package_id(int cpu) +{ + return parse_int_file("/sys/devices/system/cpu/cpu%d/topology/physical_package_id", cpu); +} + +int get_die_id(int cpu) +{ + return parse_int_file("/sys/devices/system/cpu/cpu%d/topology/die_id", cpu); +} + +int get_core_id(int cpu) +{ + return parse_int_file("/sys/devices/system/cpu/cpu%d/topology/core_id", cpu); +} + +void set_node_data(void) +{ + int pkg, node, lnode, cpu, cpux; + int cpu_count; + + /* initialize logical_node_id */ + for (cpu = 0; cpu <= topo.max_cpu_num; ++cpu) + cpus[cpu].logical_node_id = -1; + + cpu_count = 0; + for (pkg = 0; pkg < topo.num_packages; pkg++) { + lnode = 0; + for (cpu = 0; cpu <= topo.max_cpu_num; ++cpu) { + if (cpus[cpu].physical_package_id != pkg) + continue; + /* find a cpu with an unset logical_node_id */ + if (cpus[cpu].logical_node_id != -1) + continue; + cpus[cpu].logical_node_id = lnode; + node = cpus[cpu].physical_node_id; + cpu_count++; + /* + * find all matching cpus on this pkg and set + * the logical_node_id + */ + for (cpux = cpu; cpux <= topo.max_cpu_num; cpux++) { + if ((cpus[cpux].physical_package_id == pkg) && + (cpus[cpux].physical_node_id == node)) { + cpus[cpux].logical_node_id = lnode; + cpu_count++; + } + } + lnode++; + if (lnode > topo.nodes_per_pkg) + topo.nodes_per_pkg = lnode; + } + if (cpu_count >= topo.max_cpu_num) + break; + } +} + +int get_physical_node_id(struct cpu_topology *thiscpu) +{ + char path[80]; + FILE *filep; + int i; + int cpu = thiscpu->logical_cpu_id; + + for (i = 0; i <= topo.max_cpu_num; i++) { + sprintf(path, "/sys/devices/system/cpu/cpu%d/node%i/cpulist", + cpu, i); + filep = fopen(path, "r"); + if (!filep) + continue; + fclose(filep); + return i; + } + return -1; +} + +int get_thread_siblings(struct cpu_topology *thiscpu) +{ + char path[80], character; + FILE *filep; + unsigned long map; + int so, shift, sib_core; + int cpu = thiscpu->logical_cpu_id; + int offset = topo.max_cpu_num + 1; + size_t size; + int thread_id = 0; + + thiscpu->put_ids = CPU_ALLOC((topo.max_cpu_num + 1)); + if (thiscpu->thread_id < 0) + thiscpu->thread_id = thread_id++; + if (!thiscpu->put_ids) + return -1; + + size = CPU_ALLOC_SIZE((topo.max_cpu_num + 1)); + CPU_ZERO_S(size, thiscpu->put_ids); + + sprintf(path, + "/sys/devices/system/cpu/cpu%d/topology/thread_siblings", cpu); + filep = fopen(path, "r"); + + if (!filep) { + warnx("%s: open failed", path); + return -1; + } + do { + offset -= BITMASK_SIZE; + if (fscanf(filep, "%lx%c", &map, &character) != 2) + err(1, "%s: failed to parse file", path); + for (shift = 0; shift < BITMASK_SIZE; shift++) { + if ((map >> shift) & 0x1) { + so = shift + offset; + sib_core = get_core_id(so); + if (sib_core == thiscpu->physical_core_id) { + CPU_SET_S(so, size, thiscpu->put_ids); + if ((so != cpu) && + (cpus[so].thread_id < 0)) + cpus[so].thread_id = + thread_id++; + } + } + } + } while (!strncmp(&character, ",", 1)); + fclose(filep); + + return CPU_COUNT_S(size, thiscpu->put_ids); +} + +/* + * run func(thread, core, package) in topology order + * skip non-present cpus + */ + +int for_all_cpus_2(int (func)(struct thread_data *, struct core_data *, + struct pkg_data *, struct thread_data *, struct core_data *, + struct pkg_data *), struct thread_data *thread_base, + struct core_data *core_base, struct pkg_data *pkg_base, + struct thread_data *thread_base2, struct core_data *core_base2, + struct pkg_data *pkg_base2) +{ + int retval, pkg_no, node_no, core_no, thread_no; + + for (pkg_no = 0; pkg_no < topo.num_packages; ++pkg_no) { + for (node_no = 0; node_no < topo.nodes_per_pkg; ++node_no) { + for (core_no = 0; core_no < topo.cores_per_node; + ++core_no) { + for (thread_no = 0; thread_no < + topo.threads_per_core; ++thread_no) { + struct thread_data *t, *t2; + struct core_data *c, *c2; + struct pkg_data *p, *p2; + + t = GET_THREAD(thread_base, thread_no, + core_no, node_no, + pkg_no); + + if (cpu_is_not_present(t->cpu_id)) + continue; + + t2 = GET_THREAD(thread_base2, thread_no, + core_no, node_no, + pkg_no); + + c = GET_CORE(core_base, core_no, + node_no, pkg_no); + c2 = GET_CORE(core_base2, core_no, + node_no, + pkg_no); + + p = GET_PKG(pkg_base, pkg_no); + p2 = GET_PKG(pkg_base2, pkg_no); + + retval = func(t, c, p, t2, c2, p2); + if (retval) + return retval; + } + } + } + } + return 0; +} + +/* + * run func(cpu) on every cpu in /proc/stat + * return max_cpu number + */ +int for_all_proc_cpus(int (func)(int)) +{ + FILE *fp; + int cpu_num; + int retval; + + fp = fopen_or_die(proc_stat, "r"); + + retval = fscanf(fp, "cpu %*d %*d %*d %*d %*d %*d %*d %*d %*d %*d\n"); + if (retval != 0) + err(1, "%s: failed to parse format", proc_stat); + + while (1) { + retval = fscanf(fp, "cpu%u %*d %*d %*d %*d %*d %*d %*d %*d %*d %*d\n", &cpu_num); + if (retval != 1) + break; + + retval = func(cpu_num); + if (retval) { + fclose(fp); + return(retval); + } + } + fclose(fp); + return 0; +} + +void re_initialize(void) +{ + free_all_buffers(); + setup_all_buffers(); + fprintf(outf, "turbostat: re-initialized with num_cpus %d\n", topo.num_cpus); +} + +void set_max_cpu_num(void) +{ + FILE *filep; + int base_cpu; + unsigned long dummy; + char pathname[64]; + + base_cpu = sched_getcpu(); + if (base_cpu < 0) + err(1, "cannot find calling cpu ID"); + sprintf(pathname, + "/sys/devices/system/cpu/cpu%d/topology/thread_siblings", + base_cpu); + + filep = fopen_or_die(pathname, "r"); + topo.max_cpu_num = 0; + while (fscanf(filep, "%lx,", &dummy) == 1) + topo.max_cpu_num += BITMASK_SIZE; + fclose(filep); + topo.max_cpu_num--; /* 0 based */ +} + +/* + * count_cpus() + * remember the last one seen, it will be the max + */ +int count_cpus(int cpu) +{ + topo.num_cpus++; + return 0; +} +int mark_cpu_present(int cpu) +{ + CPU_SET_S(cpu, cpu_present_setsize, cpu_present_set); + return 0; +} + +int init_thread_id(int cpu) +{ + cpus[cpu].thread_id = -1; + return 0; +} + +/* + * snapshot_proc_interrupts() + * + * read and record summary of /proc/interrupts + * + * return 1 if config change requires a restart, else return 0 + */ +int snapshot_proc_interrupts(void) +{ + static FILE *fp; + int column, retval; + + if (fp == NULL) + fp = fopen_or_die("/proc/interrupts", "r"); + else + rewind(fp); + + /* read 1st line of /proc/interrupts to get cpu* name for each column */ + for (column = 0; column < topo.num_cpus; ++column) { + int cpu_number; + + retval = fscanf(fp, " CPU%d", &cpu_number); + if (retval != 1) + break; + + if (cpu_number > topo.max_cpu_num) { + warn("/proc/interrupts: cpu%d: > %d", cpu_number, topo.max_cpu_num); + return 1; + } + + irq_column_2_cpu[column] = cpu_number; + irqs_per_cpu[cpu_number] = 0; + } + + /* read /proc/interrupt count lines and sum up irqs per cpu */ + while (1) { + int column; + char buf[64]; + + retval = fscanf(fp, " %s:", buf); /* flush irq# "N:" */ + if (retval != 1) + break; + + /* read the count per cpu */ + for (column = 0; column < topo.num_cpus; ++column) { + + int cpu_number, irq_count; + + retval = fscanf(fp, " %d", &irq_count); + if (retval != 1) + break; + + cpu_number = irq_column_2_cpu[column]; + irqs_per_cpu[cpu_number] += irq_count; + + } + + while (getc(fp) != '\n') + ; /* flush interrupt description */ + + } + return 0; +} +/* + * snapshot_gfx_rc6_ms() + * + * record snapshot of + * /sys/class/drm/card0/power/rc6_residency_ms + * + * return 1 if config change requires a restart, else return 0 + */ +int snapshot_gfx_rc6_ms(void) +{ + FILE *fp; + int retval; + + fp = fopen_or_die("/sys/class/drm/card0/power/rc6_residency_ms", "r"); + + retval = fscanf(fp, "%lld", &gfx_cur_rc6_ms); + if (retval != 1) + err(1, "GFX rc6"); + + fclose(fp); + + return 0; +} +/* + * snapshot_gfx_mhz() + * + * record snapshot of + * /sys/class/graphics/fb0/device/drm/card0/gt_cur_freq_mhz + * + * return 1 if config change requires a restart, else return 0 + */ +int snapshot_gfx_mhz(void) +{ + static FILE *fp; + int retval; + + if (fp == NULL) + fp = fopen_or_die("/sys/class/graphics/fb0/device/drm/card0/gt_cur_freq_mhz", "r"); + else { + rewind(fp); + fflush(fp); + } + + retval = fscanf(fp, "%d", &gfx_cur_mhz); + if (retval != 1) + err(1, "GFX MHz"); + + return 0; +} + +/* + * snapshot_gfx_cur_mhz() + * + * record snapshot of + * /sys/class/graphics/fb0/device/drm/card0/gt_act_freq_mhz + * + * return 1 if config change requires a restart, else return 0 + */ +int snapshot_gfx_act_mhz(void) +{ + static FILE *fp; + int retval; + + if (fp == NULL) + fp = fopen_or_die("/sys/class/graphics/fb0/device/drm/card0/gt_act_freq_mhz", "r"); + else { + rewind(fp); + fflush(fp); + } + + retval = fscanf(fp, "%d", &gfx_act_mhz); + if (retval != 1) + err(1, "GFX ACT MHz"); + + return 0; +} + +/* + * snapshot_cpu_lpi() + * + * record snapshot of + * /sys/devices/system/cpu/cpuidle/low_power_idle_cpu_residency_us + */ +int snapshot_cpu_lpi_us(void) +{ + FILE *fp; + int retval; + + fp = fopen_or_die("/sys/devices/system/cpu/cpuidle/low_power_idle_cpu_residency_us", "r"); + + retval = fscanf(fp, "%lld", &cpuidle_cur_cpu_lpi_us); + if (retval != 1) { + fprintf(stderr, "Disabling Low Power Idle CPU output\n"); + BIC_NOT_PRESENT(BIC_CPU_LPI); + fclose(fp); + return -1; + } + + fclose(fp); + + return 0; +} +/* + * snapshot_sys_lpi() + * + * record snapshot of sys_lpi_file + */ +int snapshot_sys_lpi_us(void) +{ + FILE *fp; + int retval; + + fp = fopen_or_die(sys_lpi_file, "r"); + + retval = fscanf(fp, "%lld", &cpuidle_cur_sys_lpi_us); + if (retval != 1) { + fprintf(stderr, "Disabling Low Power Idle System output\n"); + BIC_NOT_PRESENT(BIC_SYS_LPI); + fclose(fp); + return -1; + } + fclose(fp); + + return 0; +} +/* + * snapshot /proc and /sys files + * + * return 1 if configuration restart needed, else return 0 + */ +int snapshot_proc_sysfs_files(void) +{ + if (DO_BIC(BIC_IRQ)) + if (snapshot_proc_interrupts()) + return 1; + + if (DO_BIC(BIC_GFX_rc6)) + snapshot_gfx_rc6_ms(); + + if (DO_BIC(BIC_GFXMHz)) + snapshot_gfx_mhz(); + + if (DO_BIC(BIC_GFXACTMHz)) + snapshot_gfx_act_mhz(); + + if (DO_BIC(BIC_CPU_LPI)) + snapshot_cpu_lpi_us(); + + if (DO_BIC(BIC_SYS_LPI)) + snapshot_sys_lpi_us(); + + return 0; +} + +int exit_requested; + +static void signal_handler (int signal) +{ + switch (signal) { + case SIGINT: + exit_requested = 1; + if (debug) + fprintf(stderr, " SIGINT\n"); + break; + case SIGUSR1: + if (debug > 1) + fprintf(stderr, "SIGUSR1\n"); + break; + } +} + +void setup_signal_handler(void) +{ + struct sigaction sa; + + memset(&sa, 0, sizeof(sa)); + + sa.sa_handler = &signal_handler; + + if (sigaction(SIGINT, &sa, NULL) < 0) + err(1, "sigaction SIGINT"); + if (sigaction(SIGUSR1, &sa, NULL) < 0) + err(1, "sigaction SIGUSR1"); +} + +void do_sleep(void) +{ + struct timeval tout; + struct timespec rest; + fd_set readfds; + int retval; + + FD_ZERO(&readfds); + FD_SET(0, &readfds); + + if (ignore_stdin) { + nanosleep(&interval_ts, NULL); + return; + } + + tout = interval_tv; + retval = select(1, &readfds, NULL, NULL, &tout); + + if (retval == 1) { + switch (getc(stdin)) { + case 'q': + exit_requested = 1; + break; + case EOF: + /* + * 'stdin' is a pipe closed on the other end. There + * won't be any further input. + */ + ignore_stdin = 1; + /* Sleep the rest of the time */ + rest.tv_sec = (tout.tv_sec + tout.tv_usec / 1000000); + rest.tv_nsec = (tout.tv_usec % 1000000) * 1000; + nanosleep(&rest, NULL); + } + } +} + +int get_msr_sum(int cpu, off_t offset, unsigned long long *msr) +{ + int ret, idx; + unsigned long long msr_cur, msr_last; + + if (!per_cpu_msr_sum) + return 1; + + idx = offset_to_idx(offset); + if (idx < 0) + return idx; + /* get_msr_sum() = sum + (get_msr() - last) */ + ret = get_msr(cpu, offset, &msr_cur); + if (ret) + return ret; + msr_last = per_cpu_msr_sum[cpu].entries[idx].last; + DELTA_WRAP32(msr_cur, msr_last); + *msr = msr_last + per_cpu_msr_sum[cpu].entries[idx].sum; + + return 0; +} + +timer_t timerid; + +/* Timer callback, update the sum of MSRs periodically. */ +static int update_msr_sum(struct thread_data *t, struct core_data *c, struct pkg_data *p) +{ + int i, ret; + int cpu = t->cpu_id; + + for (i = IDX_PKG_ENERGY; i < IDX_COUNT; i++) { + unsigned long long msr_cur, msr_last; + off_t offset; + + if (!idx_valid(i)) + continue; + offset = idx_to_offset(i); + if (offset < 0) + continue; + ret = get_msr(cpu, offset, &msr_cur); + if (ret) { + fprintf(outf, "Can not update msr(0x%llx)\n", + (unsigned long long)offset); + continue; + } + + msr_last = per_cpu_msr_sum[cpu].entries[i].last; + per_cpu_msr_sum[cpu].entries[i].last = msr_cur & 0xffffffff; + + DELTA_WRAP32(msr_cur, msr_last); + per_cpu_msr_sum[cpu].entries[i].sum += msr_last; + } + return 0; +} + +static void +msr_record_handler(union sigval v) +{ + for_all_cpus(update_msr_sum, EVEN_COUNTERS); +} + +void msr_sum_record(void) +{ + struct itimerspec its; + struct sigevent sev; + + per_cpu_msr_sum = calloc(topo.max_cpu_num + 1, sizeof(struct msr_sum_array)); + if (!per_cpu_msr_sum) { + fprintf(outf, "Can not allocate memory for long time MSR.\n"); + return; + } + /* + * Signal handler might be restricted, so use thread notifier instead. + */ + memset(&sev, 0, sizeof(struct sigevent)); + sev.sigev_notify = SIGEV_THREAD; + sev.sigev_notify_function = msr_record_handler; + + sev.sigev_value.sival_ptr = &timerid; + if (timer_create(CLOCK_REALTIME, &sev, &timerid) == -1) { + fprintf(outf, "Can not create timer.\n"); + goto release_msr; + } + + its.it_value.tv_sec = 0; + its.it_value.tv_nsec = 1; + /* + * A wraparound time has been calculated early. + * Some sources state that the peak power for a + * microprocessor is usually 1.5 times the TDP rating, + * use 2 * TDP for safety. + */ + its.it_interval.tv_sec = rapl_joule_counter_range / 2; + its.it_interval.tv_nsec = 0; + + if (timer_settime(timerid, 0, &its, NULL) == -1) { + fprintf(outf, "Can not set timer.\n"); + goto release_timer; + } + return; + + release_timer: + timer_delete(timerid); + release_msr: + free(per_cpu_msr_sum); +} + +void turbostat_loop() +{ + int retval; + int restarted = 0; + int done_iters = 0; + + setup_signal_handler(); + +restart: + restarted++; + + snapshot_proc_sysfs_files(); + retval = for_all_cpus(get_counters, EVEN_COUNTERS); + first_counter_read = 0; + if (retval < -1) { + exit(retval); + } else if (retval == -1) { + if (restarted > 10) { + exit(retval); + } + re_initialize(); + goto restart; + } + restarted = 0; + done_iters = 0; + gettimeofday(&tv_even, (struct timezone *)NULL); + + while (1) { + if (for_all_proc_cpus(cpu_is_not_present)) { + re_initialize(); + goto restart; + } + do_sleep(); + if (snapshot_proc_sysfs_files()) + goto restart; + retval = for_all_cpus(get_counters, ODD_COUNTERS); + if (retval < -1) { + exit(retval); + } else if (retval == -1) { + re_initialize(); + goto restart; + } + gettimeofday(&tv_odd, (struct timezone *)NULL); + timersub(&tv_odd, &tv_even, &tv_delta); + if (for_all_cpus_2(delta_cpu, ODD_COUNTERS, EVEN_COUNTERS)) { + re_initialize(); + goto restart; + } + compute_average(EVEN_COUNTERS); + format_all_counters(EVEN_COUNTERS); + flush_output_stdout(); + if (exit_requested) + break; + if (num_iterations && ++done_iters >= num_iterations) + break; + do_sleep(); + if (snapshot_proc_sysfs_files()) + goto restart; + retval = for_all_cpus(get_counters, EVEN_COUNTERS); + if (retval < -1) { + exit(retval); + } else if (retval == -1) { + re_initialize(); + goto restart; + } + gettimeofday(&tv_even, (struct timezone *)NULL); + timersub(&tv_even, &tv_odd, &tv_delta); + if (for_all_cpus_2(delta_cpu, EVEN_COUNTERS, ODD_COUNTERS)) { + re_initialize(); + goto restart; + } + compute_average(ODD_COUNTERS); + format_all_counters(ODD_COUNTERS); + flush_output_stdout(); + if (exit_requested) + break; + if (num_iterations && ++done_iters >= num_iterations) + break; + } +} + +void check_dev_msr() +{ + struct stat sb; + char pathname[32]; + + sprintf(pathname, "/dev/cpu/%d/msr", base_cpu); + if (stat(pathname, &sb)) + if (system("/sbin/modprobe msr > /dev/null 2>&1")) + err(-5, "no /dev/cpu/0/msr, Try \"# modprobe msr\" "); +} + +/* + * check for CAP_SYS_RAWIO + * return 0 on success + * return 1 on fail + */ +int check_for_cap_sys_rawio(void) +{ + cap_t caps; + cap_flag_value_t cap_flag_value; + + caps = cap_get_proc(); + if (caps == NULL) + err(-6, "cap_get_proc\n"); + + if (cap_get_flag(caps, CAP_SYS_RAWIO, CAP_EFFECTIVE, &cap_flag_value)) + err(-6, "cap_get\n"); + + if (cap_flag_value != CAP_SET) { + warnx("capget(CAP_SYS_RAWIO) failed," + " try \"# setcap cap_sys_rawio=ep %s\"", progname); + return 1; + } + + if (cap_free(caps) == -1) + err(-6, "cap_free\n"); + + return 0; +} +void check_permissions(void) +{ + int do_exit = 0; + char pathname[32]; + + /* check for CAP_SYS_RAWIO */ + do_exit += check_for_cap_sys_rawio(); + + /* test file permissions */ + sprintf(pathname, "/dev/cpu/%d/msr", base_cpu); + if (euidaccess(pathname, R_OK)) { + do_exit++; + warn("/dev/cpu/0/msr open failed, try chown or chmod +r /dev/cpu/*/msr"); + } + + /* if all else fails, thell them to be root */ + if (do_exit) + if (getuid() != 0) + warnx("... or simply run as root"); + + if (do_exit) + exit(-6); +} + +/* + * NHM adds support for additional MSRs: + * + * MSR_SMI_COUNT 0x00000034 + * + * MSR_PLATFORM_INFO 0x000000ce + * MSR_PKG_CST_CONFIG_CONTROL 0x000000e2 + * + * MSR_MISC_PWR_MGMT 0x000001aa + * + * MSR_PKG_C3_RESIDENCY 0x000003f8 + * MSR_PKG_C6_RESIDENCY 0x000003f9 + * MSR_CORE_C3_RESIDENCY 0x000003fc + * MSR_CORE_C6_RESIDENCY 0x000003fd + * + * Side effect: + * sets global pkg_cstate_limit to decode MSR_PKG_CST_CONFIG_CONTROL + * sets has_misc_feature_control + */ +int probe_nhm_msrs(unsigned int family, unsigned int model) +{ + unsigned long long msr; + unsigned int base_ratio; + int *pkg_cstate_limits; + + if (!genuine_intel) + return 0; + + if (family != 6) + return 0; + + bclk = discover_bclk(family, model); + + switch (model) { + case INTEL_FAM6_NEHALEM: /* Core i7 and i5 Processor - Clarksfield, Lynnfield, Jasper Forest */ + case INTEL_FAM6_NEHALEM_EX: /* Nehalem-EX Xeon - Beckton */ + pkg_cstate_limits = nhm_pkg_cstate_limits; + break; + case INTEL_FAM6_SANDYBRIDGE: /* SNB */ + case INTEL_FAM6_SANDYBRIDGE_X: /* SNB Xeon */ + case INTEL_FAM6_IVYBRIDGE: /* IVB */ + case INTEL_FAM6_IVYBRIDGE_X: /* IVB Xeon */ + pkg_cstate_limits = snb_pkg_cstate_limits; + has_misc_feature_control = 1; + break; + case INTEL_FAM6_HASWELL: /* HSW */ + case INTEL_FAM6_HASWELL_G: /* HSW */ + case INTEL_FAM6_HASWELL_X: /* HSX */ + case INTEL_FAM6_HASWELL_L: /* HSW */ + case INTEL_FAM6_BROADWELL: /* BDW */ + case INTEL_FAM6_BROADWELL_G: /* BDW */ + case INTEL_FAM6_BROADWELL_X: /* BDX */ + case INTEL_FAM6_SKYLAKE_L: /* SKL */ + case INTEL_FAM6_CANNONLAKE_L: /* CNL */ + pkg_cstate_limits = hsw_pkg_cstate_limits; + has_misc_feature_control = 1; + break; + case INTEL_FAM6_SKYLAKE_X: /* SKX */ + pkg_cstate_limits = skx_pkg_cstate_limits; + has_misc_feature_control = 1; + break; + case INTEL_FAM6_ATOM_SILVERMONT: /* BYT */ + no_MSR_MISC_PWR_MGMT = 1; + case INTEL_FAM6_ATOM_SILVERMONT_D: /* AVN */ + pkg_cstate_limits = slv_pkg_cstate_limits; + break; + case INTEL_FAM6_ATOM_AIRMONT: /* AMT */ + pkg_cstate_limits = amt_pkg_cstate_limits; + no_MSR_MISC_PWR_MGMT = 1; + break; + case INTEL_FAM6_XEON_PHI_KNL: /* PHI */ + pkg_cstate_limits = phi_pkg_cstate_limits; + break; + case INTEL_FAM6_ATOM_GOLDMONT: /* BXT */ + case INTEL_FAM6_ATOM_GOLDMONT_PLUS: + case INTEL_FAM6_ATOM_GOLDMONT_D: /* DNV */ + case INTEL_FAM6_ATOM_TREMONT: /* EHL */ + case INTEL_FAM6_ATOM_TREMONT_D: /* JVL */ + pkg_cstate_limits = glm_pkg_cstate_limits; + break; + default: + return 0; + } + get_msr(base_cpu, MSR_PKG_CST_CONFIG_CONTROL, &msr); + pkg_cstate_limit = pkg_cstate_limits[msr & 0xF]; + + get_msr(base_cpu, MSR_PLATFORM_INFO, &msr); + base_ratio = (msr >> 8) & 0xFF; + + base_hz = base_ratio * bclk * 1000000; + has_base_hz = 1; + return 1; +} +/* + * SLV client has support for unique MSRs: + * + * MSR_CC6_DEMOTION_POLICY_CONFIG + * MSR_MC6_DEMOTION_POLICY_CONFIG + */ + +int has_slv_msrs(unsigned int family, unsigned int model) +{ + if (!genuine_intel) + return 0; + + switch (model) { + case INTEL_FAM6_ATOM_SILVERMONT: + case INTEL_FAM6_ATOM_SILVERMONT_MID: + case INTEL_FAM6_ATOM_AIRMONT_MID: + return 1; + } + return 0; +} +int is_dnv(unsigned int family, unsigned int model) +{ + + if (!genuine_intel) + return 0; + + switch (model) { + case INTEL_FAM6_ATOM_GOLDMONT_D: + return 1; + } + return 0; +} +int is_bdx(unsigned int family, unsigned int model) +{ + + if (!genuine_intel) + return 0; + + switch (model) { + case INTEL_FAM6_BROADWELL_X: + return 1; + } + return 0; +} +int is_skx(unsigned int family, unsigned int model) +{ + + if (!genuine_intel) + return 0; + + switch (model) { + case INTEL_FAM6_SKYLAKE_X: + return 1; + } + return 0; +} +int is_ehl(unsigned int family, unsigned int model) +{ + if (!genuine_intel) + return 0; + + switch (model) { + case INTEL_FAM6_ATOM_TREMONT: + return 1; + } + return 0; +} +int is_jvl(unsigned int family, unsigned int model) +{ + if (!genuine_intel) + return 0; + + switch (model) { + case INTEL_FAM6_ATOM_TREMONT_D: + return 1; + } + return 0; +} + +int has_turbo_ratio_limit(unsigned int family, unsigned int model) +{ + if (has_slv_msrs(family, model)) + return 0; + + switch (model) { + /* Nehalem compatible, but do not include turbo-ratio limit support */ + case INTEL_FAM6_NEHALEM_EX: /* Nehalem-EX Xeon - Beckton */ + case INTEL_FAM6_XEON_PHI_KNL: /* PHI - Knights Landing (different MSR definition) */ + return 0; + default: + return 1; + } +} +int has_atom_turbo_ratio_limit(unsigned int family, unsigned int model) +{ + if (has_slv_msrs(family, model)) + return 1; + + return 0; +} +int has_ivt_turbo_ratio_limit(unsigned int family, unsigned int model) +{ + if (!genuine_intel) + return 0; + + if (family != 6) + return 0; + + switch (model) { + case INTEL_FAM6_IVYBRIDGE_X: /* IVB Xeon */ + case INTEL_FAM6_HASWELL_X: /* HSW Xeon */ + return 1; + default: + return 0; + } +} +int has_hsw_turbo_ratio_limit(unsigned int family, unsigned int model) +{ + if (!genuine_intel) + return 0; + + if (family != 6) + return 0; + + switch (model) { + case INTEL_FAM6_HASWELL_X: /* HSW Xeon */ + return 1; + default: + return 0; + } +} + +int has_knl_turbo_ratio_limit(unsigned int family, unsigned int model) +{ + if (!genuine_intel) + return 0; + + if (family != 6) + return 0; + + switch (model) { + case INTEL_FAM6_XEON_PHI_KNL: /* Knights Landing */ + return 1; + default: + return 0; + } +} +int has_glm_turbo_ratio_limit(unsigned int family, unsigned int model) +{ + if (!genuine_intel) + return 0; + + if (family != 6) + return 0; + + switch (model) { + case INTEL_FAM6_ATOM_GOLDMONT: + case INTEL_FAM6_SKYLAKE_X: + return 1; + default: + return 0; + } +} +int has_config_tdp(unsigned int family, unsigned int model) +{ + if (!genuine_intel) + return 0; + + if (family != 6) + return 0; + + switch (model) { + case INTEL_FAM6_IVYBRIDGE: /* IVB */ + case INTEL_FAM6_HASWELL: /* HSW */ + case INTEL_FAM6_HASWELL_X: /* HSX */ + case INTEL_FAM6_HASWELL_L: /* HSW */ + case INTEL_FAM6_HASWELL_G: /* HSW */ + case INTEL_FAM6_BROADWELL: /* BDW */ + case INTEL_FAM6_BROADWELL_G: /* BDW */ + case INTEL_FAM6_BROADWELL_X: /* BDX */ + case INTEL_FAM6_SKYLAKE_L: /* SKL */ + case INTEL_FAM6_CANNONLAKE_L: /* CNL */ + case INTEL_FAM6_SKYLAKE_X: /* SKX */ + + case INTEL_FAM6_XEON_PHI_KNL: /* Knights Landing */ + return 1; + default: + return 0; + } +} + +static void +remove_underbar(char *s) +{ + char *to = s; + + while (*s) { + if (*s != '_') + *to++ = *s; + s++; + } + + *to = 0; +} + +static void +dump_cstate_pstate_config_info(unsigned int family, unsigned int model) +{ + if (!do_nhm_platform_info) + return; + + dump_nhm_platform_info(); + + if (has_hsw_turbo_ratio_limit(family, model)) + dump_hsw_turbo_ratio_limits(); + + if (has_ivt_turbo_ratio_limit(family, model)) + dump_ivt_turbo_ratio_limits(); + + if (has_turbo_ratio_limit(family, model)) + dump_turbo_ratio_limits(family, model); + + if (has_atom_turbo_ratio_limit(family, model)) + dump_atom_turbo_ratio_limits(); + + if (has_knl_turbo_ratio_limit(family, model)) + dump_knl_turbo_ratio_limits(); + + if (has_config_tdp(family, model)) + dump_config_tdp(); + + dump_nhm_cst_cfg(); +} + +static void dump_sysfs_file(char *path) +{ + FILE *input; + char cpuidle_buf[64]; + + input = fopen(path, "r"); + if (input == NULL) { + if (debug) + fprintf(outf, "NSFOD %s\n", path); + return; + } + if (!fgets(cpuidle_buf, sizeof(cpuidle_buf), input)) + err(1, "%s: failed to read file", path); + fclose(input); + + fprintf(outf, "%s: %s", strrchr(path, '/') + 1, cpuidle_buf); +} +static void +dump_sysfs_cstate_config(void) +{ + char path[64]; + char name_buf[16]; + char desc[64]; + FILE *input; + int state; + char *sp; + + if (access("/sys/devices/system/cpu/cpuidle", R_OK)) { + fprintf(outf, "cpuidle not loaded\n"); + return; + } + + dump_sysfs_file("/sys/devices/system/cpu/cpuidle/current_driver"); + dump_sysfs_file("/sys/devices/system/cpu/cpuidle/current_governor"); + dump_sysfs_file("/sys/devices/system/cpu/cpuidle/current_governor_ro"); + + for (state = 0; state < 10; ++state) { + + sprintf(path, "/sys/devices/system/cpu/cpu%d/cpuidle/state%d/name", + base_cpu, state); + input = fopen(path, "r"); + if (input == NULL) + continue; + if (!fgets(name_buf, sizeof(name_buf), input)) + err(1, "%s: failed to read file", path); + + /* truncate "C1-HSW\n" to "C1", or truncate "C1\n" to "C1" */ + sp = strchr(name_buf, '-'); + if (!sp) + sp = strchrnul(name_buf, '\n'); + *sp = '\0'; + fclose(input); + + remove_underbar(name_buf); + + sprintf(path, "/sys/devices/system/cpu/cpu%d/cpuidle/state%d/desc", + base_cpu, state); + input = fopen(path, "r"); + if (input == NULL) + continue; + if (!fgets(desc, sizeof(desc), input)) + err(1, "%s: failed to read file", path); + + fprintf(outf, "cpu%d: %s: %s", base_cpu, name_buf, desc); + fclose(input); + } +} +static void +dump_sysfs_pstate_config(void) +{ + char path[64]; + char driver_buf[64]; + char governor_buf[64]; + FILE *input; + int turbo; + + sprintf(path, "/sys/devices/system/cpu/cpu%d/cpufreq/scaling_driver", + base_cpu); + input = fopen(path, "r"); + if (input == NULL) { + fprintf(outf, "NSFOD %s\n", path); + return; + } + if (!fgets(driver_buf, sizeof(driver_buf), input)) + err(1, "%s: failed to read file", path); + fclose(input); + + sprintf(path, "/sys/devices/system/cpu/cpu%d/cpufreq/scaling_governor", + base_cpu); + input = fopen(path, "r"); + if (input == NULL) { + fprintf(outf, "NSFOD %s\n", path); + return; + } + if (!fgets(governor_buf, sizeof(governor_buf), input)) + err(1, "%s: failed to read file", path); + fclose(input); + + fprintf(outf, "cpu%d: cpufreq driver: %s", base_cpu, driver_buf); + fprintf(outf, "cpu%d: cpufreq governor: %s", base_cpu, governor_buf); + + sprintf(path, "/sys/devices/system/cpu/cpufreq/boost"); + input = fopen(path, "r"); + if (input != NULL) { + if (fscanf(input, "%d", &turbo) != 1) + err(1, "%s: failed to parse number from file", path); + fprintf(outf, "cpufreq boost: %d\n", turbo); + fclose(input); + } + + sprintf(path, "/sys/devices/system/cpu/intel_pstate/no_turbo"); + input = fopen(path, "r"); + if (input != NULL) { + if (fscanf(input, "%d", &turbo) != 1) + err(1, "%s: failed to parse number from file", path); + fprintf(outf, "cpufreq intel_pstate no_turbo: %d\n", turbo); + fclose(input); + } +} + + +/* + * print_epb() + * Decode the ENERGY_PERF_BIAS MSR + */ +int print_epb(struct thread_data *t, struct core_data *c, struct pkg_data *p) +{ + unsigned long long msr; + char *epb_string; + int cpu; + + if (!has_epb) + return 0; + + cpu = t->cpu_id; + + /* EPB is per-package */ + if (!(t->flags & CPU_IS_FIRST_THREAD_IN_CORE) || !(t->flags & CPU_IS_FIRST_CORE_IN_PACKAGE)) + return 0; + + if (cpu_migrate(cpu)) { + fprintf(outf, "print_epb: Could not migrate to CPU %d\n", cpu); + return -1; + } + + if (get_msr(cpu, MSR_IA32_ENERGY_PERF_BIAS, &msr)) + return 0; + + switch (msr & 0xF) { + case ENERGY_PERF_BIAS_PERFORMANCE: + epb_string = "performance"; + break; + case ENERGY_PERF_BIAS_NORMAL: + epb_string = "balanced"; + break; + case ENERGY_PERF_BIAS_POWERSAVE: + epb_string = "powersave"; + break; + default: + epb_string = "custom"; + break; + } + fprintf(outf, "cpu%d: MSR_IA32_ENERGY_PERF_BIAS: 0x%08llx (%s)\n", cpu, msr, epb_string); + + return 0; +} +/* + * print_hwp() + * Decode the MSR_HWP_CAPABILITIES + */ +int print_hwp(struct thread_data *t, struct core_data *c, struct pkg_data *p) +{ + unsigned long long msr; + int cpu; + + if (!has_hwp) + return 0; + + cpu = t->cpu_id; + + /* MSR_HWP_CAPABILITIES is per-package */ + if (!(t->flags & CPU_IS_FIRST_THREAD_IN_CORE) || !(t->flags & CPU_IS_FIRST_CORE_IN_PACKAGE)) + return 0; + + if (cpu_migrate(cpu)) { + fprintf(outf, "print_hwp: Could not migrate to CPU %d\n", cpu); + return -1; + } + + if (get_msr(cpu, MSR_PM_ENABLE, &msr)) + return 0; + + fprintf(outf, "cpu%d: MSR_PM_ENABLE: 0x%08llx (%sHWP)\n", + cpu, msr, (msr & (1 << 0)) ? "" : "No-"); + + /* MSR_PM_ENABLE[1] == 1 if HWP is enabled and MSRs visible */ + if ((msr & (1 << 0)) == 0) + return 0; + + if (get_msr(cpu, MSR_HWP_CAPABILITIES, &msr)) + return 0; + + fprintf(outf, "cpu%d: MSR_HWP_CAPABILITIES: 0x%08llx " + "(high %d guar %d eff %d low %d)\n", + cpu, msr, + (unsigned int)HWP_HIGHEST_PERF(msr), + (unsigned int)HWP_GUARANTEED_PERF(msr), + (unsigned int)HWP_MOSTEFFICIENT_PERF(msr), + (unsigned int)HWP_LOWEST_PERF(msr)); + + if (get_msr(cpu, MSR_HWP_REQUEST, &msr)) + return 0; + + fprintf(outf, "cpu%d: MSR_HWP_REQUEST: 0x%08llx " + "(min %d max %d des %d epp 0x%x window 0x%x pkg 0x%x)\n", + cpu, msr, + (unsigned int)(((msr) >> 0) & 0xff), + (unsigned int)(((msr) >> 8) & 0xff), + (unsigned int)(((msr) >> 16) & 0xff), + (unsigned int)(((msr) >> 24) & 0xff), + (unsigned int)(((msr) >> 32) & 0xff3), + (unsigned int)(((msr) >> 42) & 0x1)); + + if (has_hwp_pkg) { + if (get_msr(cpu, MSR_HWP_REQUEST_PKG, &msr)) + return 0; + + fprintf(outf, "cpu%d: MSR_HWP_REQUEST_PKG: 0x%08llx " + "(min %d max %d des %d epp 0x%x window 0x%x)\n", + cpu, msr, + (unsigned int)(((msr) >> 0) & 0xff), + (unsigned int)(((msr) >> 8) & 0xff), + (unsigned int)(((msr) >> 16) & 0xff), + (unsigned int)(((msr) >> 24) & 0xff), + (unsigned int)(((msr) >> 32) & 0xff3)); + } + if (has_hwp_notify) { + if (get_msr(cpu, MSR_HWP_INTERRUPT, &msr)) + return 0; + + fprintf(outf, "cpu%d: MSR_HWP_INTERRUPT: 0x%08llx " + "(%s_Guaranteed_Perf_Change, %s_Excursion_Min)\n", + cpu, msr, + ((msr) & 0x1) ? "EN" : "Dis", + ((msr) & 0x2) ? "EN" : "Dis"); + } + if (get_msr(cpu, MSR_HWP_STATUS, &msr)) + return 0; + + fprintf(outf, "cpu%d: MSR_HWP_STATUS: 0x%08llx " + "(%sGuaranteed_Perf_Change, %sExcursion_Min)\n", + cpu, msr, + ((msr) & 0x1) ? "" : "No-", + ((msr) & 0x2) ? "" : "No-"); + + return 0; +} + +/* + * print_perf_limit() + */ +int print_perf_limit(struct thread_data *t, struct core_data *c, struct pkg_data *p) +{ + unsigned long long msr; + int cpu; + + cpu = t->cpu_id; + + /* per-package */ + if (!(t->flags & CPU_IS_FIRST_THREAD_IN_CORE) || !(t->flags & CPU_IS_FIRST_CORE_IN_PACKAGE)) + return 0; + + if (cpu_migrate(cpu)) { + fprintf(outf, "print_perf_limit: Could not migrate to CPU %d\n", cpu); + return -1; + } + + if (do_core_perf_limit_reasons) { + get_msr(cpu, MSR_CORE_PERF_LIMIT_REASONS, &msr); + fprintf(outf, "cpu%d: MSR_CORE_PERF_LIMIT_REASONS, 0x%08llx", cpu, msr); + fprintf(outf, " (Active: %s%s%s%s%s%s%s%s%s%s%s%s%s%s)", + (msr & 1 << 15) ? "bit15, " : "", + (msr & 1 << 14) ? "bit14, " : "", + (msr & 1 << 13) ? "Transitions, " : "", + (msr & 1 << 12) ? "MultiCoreTurbo, " : "", + (msr & 1 << 11) ? "PkgPwrL2, " : "", + (msr & 1 << 10) ? "PkgPwrL1, " : "", + (msr & 1 << 9) ? "CorePwr, " : "", + (msr & 1 << 8) ? "Amps, " : "", + (msr & 1 << 6) ? "VR-Therm, " : "", + (msr & 1 << 5) ? "Auto-HWP, " : "", + (msr & 1 << 4) ? "Graphics, " : "", + (msr & 1 << 2) ? "bit2, " : "", + (msr & 1 << 1) ? "ThermStatus, " : "", + (msr & 1 << 0) ? "PROCHOT, " : ""); + fprintf(outf, " (Logged: %s%s%s%s%s%s%s%s%s%s%s%s%s%s)\n", + (msr & 1 << 31) ? "bit31, " : "", + (msr & 1 << 30) ? "bit30, " : "", + (msr & 1 << 29) ? "Transitions, " : "", + (msr & 1 << 28) ? "MultiCoreTurbo, " : "", + (msr & 1 << 27) ? "PkgPwrL2, " : "", + (msr & 1 << 26) ? "PkgPwrL1, " : "", + (msr & 1 << 25) ? "CorePwr, " : "", + (msr & 1 << 24) ? "Amps, " : "", + (msr & 1 << 22) ? "VR-Therm, " : "", + (msr & 1 << 21) ? "Auto-HWP, " : "", + (msr & 1 << 20) ? "Graphics, " : "", + (msr & 1 << 18) ? "bit18, " : "", + (msr & 1 << 17) ? "ThermStatus, " : "", + (msr & 1 << 16) ? "PROCHOT, " : ""); + + } + if (do_gfx_perf_limit_reasons) { + get_msr(cpu, MSR_GFX_PERF_LIMIT_REASONS, &msr); + fprintf(outf, "cpu%d: MSR_GFX_PERF_LIMIT_REASONS, 0x%08llx", cpu, msr); + fprintf(outf, " (Active: %s%s%s%s%s%s%s%s)", + (msr & 1 << 0) ? "PROCHOT, " : "", + (msr & 1 << 1) ? "ThermStatus, " : "", + (msr & 1 << 4) ? "Graphics, " : "", + (msr & 1 << 6) ? "VR-Therm, " : "", + (msr & 1 << 8) ? "Amps, " : "", + (msr & 1 << 9) ? "GFXPwr, " : "", + (msr & 1 << 10) ? "PkgPwrL1, " : "", + (msr & 1 << 11) ? "PkgPwrL2, " : ""); + fprintf(outf, " (Logged: %s%s%s%s%s%s%s%s)\n", + (msr & 1 << 16) ? "PROCHOT, " : "", + (msr & 1 << 17) ? "ThermStatus, " : "", + (msr & 1 << 20) ? "Graphics, " : "", + (msr & 1 << 22) ? "VR-Therm, " : "", + (msr & 1 << 24) ? "Amps, " : "", + (msr & 1 << 25) ? "GFXPwr, " : "", + (msr & 1 << 26) ? "PkgPwrL1, " : "", + (msr & 1 << 27) ? "PkgPwrL2, " : ""); + } + if (do_ring_perf_limit_reasons) { + get_msr(cpu, MSR_RING_PERF_LIMIT_REASONS, &msr); + fprintf(outf, "cpu%d: MSR_RING_PERF_LIMIT_REASONS, 0x%08llx", cpu, msr); + fprintf(outf, " (Active: %s%s%s%s%s%s)", + (msr & 1 << 0) ? "PROCHOT, " : "", + (msr & 1 << 1) ? "ThermStatus, " : "", + (msr & 1 << 6) ? "VR-Therm, " : "", + (msr & 1 << 8) ? "Amps, " : "", + (msr & 1 << 10) ? "PkgPwrL1, " : "", + (msr & 1 << 11) ? "PkgPwrL2, " : ""); + fprintf(outf, " (Logged: %s%s%s%s%s%s)\n", + (msr & 1 << 16) ? "PROCHOT, " : "", + (msr & 1 << 17) ? "ThermStatus, " : "", + (msr & 1 << 22) ? "VR-Therm, " : "", + (msr & 1 << 24) ? "Amps, " : "", + (msr & 1 << 26) ? "PkgPwrL1, " : "", + (msr & 1 << 27) ? "PkgPwrL2, " : ""); + } + return 0; +} + +#define RAPL_POWER_GRANULARITY 0x7FFF /* 15 bit power granularity */ +#define RAPL_TIME_GRANULARITY 0x3F /* 6 bit time granularity */ + +double get_tdp_intel(unsigned int model) +{ + unsigned long long msr; + + if (do_rapl & RAPL_PKG_POWER_INFO) + if (!get_msr(base_cpu, MSR_PKG_POWER_INFO, &msr)) + return ((msr >> 0) & RAPL_POWER_GRANULARITY) * rapl_power_units; + + switch (model) { + case INTEL_FAM6_ATOM_SILVERMONT: + case INTEL_FAM6_ATOM_SILVERMONT_D: + return 30.0; + default: + return 135.0; + } +} + +double get_tdp_amd(unsigned int family) +{ + /* This is the max stock TDP of HEDT/Server Fam17h+ chips */ + return 280.0; +} + +/* + * rapl_dram_energy_units_probe() + * Energy units are either hard-coded, or come from RAPL Energy Unit MSR. + */ +static double +rapl_dram_energy_units_probe(int model, double rapl_energy_units) +{ + /* only called for genuine_intel, family 6 */ + + switch (model) { + case INTEL_FAM6_HASWELL_X: /* HSX */ + case INTEL_FAM6_BROADWELL_X: /* BDX */ + case INTEL_FAM6_XEON_PHI_KNL: /* KNL */ + case INTEL_FAM6_ICELAKE_X: /* ICX */ + return (rapl_dram_energy_units = 15.3 / 1000000); + default: + return (rapl_energy_units); + } +} + +void rapl_probe_intel(unsigned int family, unsigned int model) +{ + unsigned long long msr; + unsigned int time_unit; + double tdp; + + if (family != 6) + return; + + switch (model) { + case INTEL_FAM6_SANDYBRIDGE: + case INTEL_FAM6_IVYBRIDGE: + case INTEL_FAM6_HASWELL: /* HSW */ + case INTEL_FAM6_HASWELL_L: /* HSW */ + case INTEL_FAM6_HASWELL_G: /* HSW */ + case INTEL_FAM6_BROADWELL: /* BDW */ + case INTEL_FAM6_BROADWELL_G: /* BDW */ + do_rapl = RAPL_PKG | RAPL_CORES | RAPL_CORE_POLICY | RAPL_GFX | RAPL_PKG_POWER_INFO; + if (rapl_joules) { + BIC_PRESENT(BIC_Pkg_J); + BIC_PRESENT(BIC_Cor_J); + BIC_PRESENT(BIC_GFX_J); + } else { + BIC_PRESENT(BIC_PkgWatt); + BIC_PRESENT(BIC_CorWatt); + BIC_PRESENT(BIC_GFXWatt); + } + break; + case INTEL_FAM6_ATOM_GOLDMONT: /* BXT */ + case INTEL_FAM6_ATOM_GOLDMONT_PLUS: + do_rapl = RAPL_PKG | RAPL_PKG_POWER_INFO; + if (rapl_joules) + BIC_PRESENT(BIC_Pkg_J); + else + BIC_PRESENT(BIC_PkgWatt); + break; + case INTEL_FAM6_ATOM_TREMONT: /* EHL */ + do_rapl = RAPL_PKG | RAPL_CORES | RAPL_CORE_POLICY | RAPL_DRAM | RAPL_DRAM_PERF_STATUS | RAPL_PKG_PERF_STATUS | RAPL_GFX | RAPL_PKG_POWER_INFO; + if (rapl_joules) { + BIC_PRESENT(BIC_Pkg_J); + BIC_PRESENT(BIC_Cor_J); + BIC_PRESENT(BIC_RAM_J); + BIC_PRESENT(BIC_GFX_J); + } else { + BIC_PRESENT(BIC_PkgWatt); + BIC_PRESENT(BIC_CorWatt); + BIC_PRESENT(BIC_RAMWatt); + BIC_PRESENT(BIC_GFXWatt); + } + break; + case INTEL_FAM6_ATOM_TREMONT_D: /* JVL */ + do_rapl = RAPL_PKG | RAPL_PKG_PERF_STATUS | RAPL_PKG_POWER_INFO; + BIC_PRESENT(BIC_PKG__); + if (rapl_joules) + BIC_PRESENT(BIC_Pkg_J); + else + BIC_PRESENT(BIC_PkgWatt); + break; + case INTEL_FAM6_SKYLAKE_L: /* SKL */ + case INTEL_FAM6_CANNONLAKE_L: /* CNL */ + do_rapl = RAPL_PKG | RAPL_CORES | RAPL_CORE_POLICY | RAPL_DRAM | RAPL_DRAM_PERF_STATUS | RAPL_PKG_PERF_STATUS | RAPL_GFX | RAPL_PKG_POWER_INFO; + BIC_PRESENT(BIC_PKG__); + BIC_PRESENT(BIC_RAM__); + if (rapl_joules) { + BIC_PRESENT(BIC_Pkg_J); + BIC_PRESENT(BIC_Cor_J); + BIC_PRESENT(BIC_RAM_J); + BIC_PRESENT(BIC_GFX_J); + } else { + BIC_PRESENT(BIC_PkgWatt); + BIC_PRESENT(BIC_CorWatt); + BIC_PRESENT(BIC_RAMWatt); + BIC_PRESENT(BIC_GFXWatt); + } + break; + case INTEL_FAM6_HASWELL_X: /* HSX */ + case INTEL_FAM6_BROADWELL_X: /* BDX */ + case INTEL_FAM6_SKYLAKE_X: /* SKX */ + case INTEL_FAM6_XEON_PHI_KNL: /* KNL */ + do_rapl = RAPL_PKG | RAPL_DRAM | RAPL_DRAM_POWER_INFO | RAPL_DRAM_PERF_STATUS | RAPL_PKG_PERF_STATUS | RAPL_PKG_POWER_INFO; + BIC_PRESENT(BIC_PKG__); + BIC_PRESENT(BIC_RAM__); + if (rapl_joules) { + BIC_PRESENT(BIC_Pkg_J); + BIC_PRESENT(BIC_RAM_J); + } else { + BIC_PRESENT(BIC_PkgWatt); + BIC_PRESENT(BIC_RAMWatt); + } + break; + case INTEL_FAM6_SANDYBRIDGE_X: + case INTEL_FAM6_IVYBRIDGE_X: + do_rapl = RAPL_PKG | RAPL_CORES | RAPL_CORE_POLICY | RAPL_DRAM | RAPL_DRAM_POWER_INFO | RAPL_PKG_PERF_STATUS | RAPL_DRAM_PERF_STATUS | RAPL_PKG_POWER_INFO; + BIC_PRESENT(BIC_PKG__); + BIC_PRESENT(BIC_RAM__); + if (rapl_joules) { + BIC_PRESENT(BIC_Pkg_J); + BIC_PRESENT(BIC_Cor_J); + BIC_PRESENT(BIC_RAM_J); + } else { + BIC_PRESENT(BIC_PkgWatt); + BIC_PRESENT(BIC_CorWatt); + BIC_PRESENT(BIC_RAMWatt); + } + break; + case INTEL_FAM6_ATOM_SILVERMONT: /* BYT */ + case INTEL_FAM6_ATOM_SILVERMONT_D: /* AVN */ + do_rapl = RAPL_PKG | RAPL_CORES; + if (rapl_joules) { + BIC_PRESENT(BIC_Pkg_J); + BIC_PRESENT(BIC_Cor_J); + } else { + BIC_PRESENT(BIC_PkgWatt); + BIC_PRESENT(BIC_CorWatt); + } + break; + case INTEL_FAM6_ATOM_GOLDMONT_D: /* DNV */ + do_rapl = RAPL_PKG | RAPL_DRAM | RAPL_DRAM_POWER_INFO | RAPL_DRAM_PERF_STATUS | RAPL_PKG_PERF_STATUS | RAPL_PKG_POWER_INFO | RAPL_CORES_ENERGY_STATUS; + BIC_PRESENT(BIC_PKG__); + BIC_PRESENT(BIC_RAM__); + if (rapl_joules) { + BIC_PRESENT(BIC_Pkg_J); + BIC_PRESENT(BIC_Cor_J); + BIC_PRESENT(BIC_RAM_J); + } else { + BIC_PRESENT(BIC_PkgWatt); + BIC_PRESENT(BIC_CorWatt); + BIC_PRESENT(BIC_RAMWatt); + } + break; + default: + return; + } + + /* units on package 0, verify later other packages match */ + if (get_msr(base_cpu, MSR_RAPL_POWER_UNIT, &msr)) + return; + + rapl_power_units = 1.0 / (1 << (msr & 0xF)); + if (model == INTEL_FAM6_ATOM_SILVERMONT) + rapl_energy_units = 1.0 * (1 << (msr >> 8 & 0x1F)) / 1000000; + else + rapl_energy_units = 1.0 / (1 << (msr >> 8 & 0x1F)); + + rapl_dram_energy_units = rapl_dram_energy_units_probe(model, rapl_energy_units); + + time_unit = msr >> 16 & 0xF; + if (time_unit == 0) + time_unit = 0xA; + + rapl_time_units = 1.0 / (1 << (time_unit)); + + tdp = get_tdp_intel(model); + + rapl_joule_counter_range = 0xFFFFFFFF * rapl_energy_units / tdp; + if (!quiet) + fprintf(outf, "RAPL: %.0f sec. Joule Counter Range, at %.0f Watts\n", rapl_joule_counter_range, tdp); +} + +void rapl_probe_amd(unsigned int family, unsigned int model) +{ + unsigned long long msr; + unsigned int eax, ebx, ecx, edx; + unsigned int has_rapl = 0; + double tdp; + + if (max_extended_level >= 0x80000007) { + __cpuid(0x80000007, eax, ebx, ecx, edx); + /* RAPL (Fam 17h+) */ + has_rapl = edx & (1 << 14); + } + + if (!has_rapl || family < 0x17) + return; + + do_rapl = RAPL_AMD_F17H | RAPL_PER_CORE_ENERGY; + if (rapl_joules) { + BIC_PRESENT(BIC_Pkg_J); + BIC_PRESENT(BIC_Cor_J); + } else { + BIC_PRESENT(BIC_PkgWatt); + BIC_PRESENT(BIC_CorWatt); + } + + if (get_msr(base_cpu, MSR_RAPL_PWR_UNIT, &msr)) + return; + + rapl_time_units = ldexp(1.0, -(msr >> 16 & 0xf)); + rapl_energy_units = ldexp(1.0, -(msr >> 8 & 0x1f)); + rapl_power_units = ldexp(1.0, -(msr & 0xf)); + + tdp = get_tdp_amd(family); + + rapl_joule_counter_range = 0xFFFFFFFF * rapl_energy_units / tdp; + if (!quiet) + fprintf(outf, "RAPL: %.0f sec. Joule Counter Range, at %.0f Watts\n", rapl_joule_counter_range, tdp); +} + +/* + * rapl_probe() + * + * sets do_rapl, rapl_power_units, rapl_energy_units, rapl_time_units + */ +void rapl_probe(unsigned int family, unsigned int model) +{ + if (genuine_intel) + rapl_probe_intel(family, model); + if (authentic_amd || hygon_genuine) + rapl_probe_amd(family, model); +} + +void perf_limit_reasons_probe(unsigned int family, unsigned int model) +{ + if (!genuine_intel) + return; + + if (family != 6) + return; + + switch (model) { + case INTEL_FAM6_HASWELL: /* HSW */ + case INTEL_FAM6_HASWELL_L: /* HSW */ + case INTEL_FAM6_HASWELL_G: /* HSW */ + do_gfx_perf_limit_reasons = 1; + case INTEL_FAM6_HASWELL_X: /* HSX */ + do_core_perf_limit_reasons = 1; + do_ring_perf_limit_reasons = 1; + default: + return; + } +} + +void automatic_cstate_conversion_probe(unsigned int family, unsigned int model) +{ + if (is_skx(family, model) || is_bdx(family, model)) + has_automatic_cstate_conversion = 1; +} + +int print_thermal(struct thread_data *t, struct core_data *c, struct pkg_data *p) +{ + unsigned long long msr; + unsigned int dts, dts2; + int cpu; + + if (!(do_dts || do_ptm)) + return 0; + + cpu = t->cpu_id; + + /* DTS is per-core, no need to print for each thread */ + if (!(t->flags & CPU_IS_FIRST_THREAD_IN_CORE)) + return 0; + + if (cpu_migrate(cpu)) { + fprintf(outf, "print_thermal: Could not migrate to CPU %d\n", cpu); + return -1; + } + + if (do_ptm && (t->flags & CPU_IS_FIRST_CORE_IN_PACKAGE)) { + if (get_msr(cpu, MSR_IA32_PACKAGE_THERM_STATUS, &msr)) + return 0; + + dts = (msr >> 16) & 0x7F; + fprintf(outf, "cpu%d: MSR_IA32_PACKAGE_THERM_STATUS: 0x%08llx (%d C)\n", + cpu, msr, tcc_activation_temp - dts); + + if (get_msr(cpu, MSR_IA32_PACKAGE_THERM_INTERRUPT, &msr)) + return 0; + + dts = (msr >> 16) & 0x7F; + dts2 = (msr >> 8) & 0x7F; + fprintf(outf, "cpu%d: MSR_IA32_PACKAGE_THERM_INTERRUPT: 0x%08llx (%d C, %d C)\n", + cpu, msr, tcc_activation_temp - dts, tcc_activation_temp - dts2); + } + + + if (do_dts && debug) { + unsigned int resolution; + + if (get_msr(cpu, MSR_IA32_THERM_STATUS, &msr)) + return 0; + + dts = (msr >> 16) & 0x7F; + resolution = (msr >> 27) & 0xF; + fprintf(outf, "cpu%d: MSR_IA32_THERM_STATUS: 0x%08llx (%d C +/- %d)\n", + cpu, msr, tcc_activation_temp - dts, resolution); + + if (get_msr(cpu, MSR_IA32_THERM_INTERRUPT, &msr)) + return 0; + + dts = (msr >> 16) & 0x7F; + dts2 = (msr >> 8) & 0x7F; + fprintf(outf, "cpu%d: MSR_IA32_THERM_INTERRUPT: 0x%08llx (%d C, %d C)\n", + cpu, msr, tcc_activation_temp - dts, tcc_activation_temp - dts2); + } + + return 0; +} + +void print_power_limit_msr(int cpu, unsigned long long msr, char *label) +{ + fprintf(outf, "cpu%d: %s: %sabled (%f Watts, %f sec, clamp %sabled)\n", + cpu, label, + ((msr >> 15) & 1) ? "EN" : "DIS", + ((msr >> 0) & 0x7FFF) * rapl_power_units, + (1.0 + (((msr >> 22) & 0x3)/4.0)) * (1 << ((msr >> 17) & 0x1F)) * rapl_time_units, + (((msr >> 16) & 1) ? "EN" : "DIS")); + + return; +} + +int print_rapl(struct thread_data *t, struct core_data *c, struct pkg_data *p) +{ + unsigned long long msr; + const char *msr_name; + int cpu; + + if (!do_rapl) + return 0; + + /* RAPL counters are per package, so print only for 1st thread/package */ + if (!(t->flags & CPU_IS_FIRST_THREAD_IN_CORE) || !(t->flags & CPU_IS_FIRST_CORE_IN_PACKAGE)) + return 0; + + cpu = t->cpu_id; + if (cpu_migrate(cpu)) { + fprintf(outf, "print_rapl: Could not migrate to CPU %d\n", cpu); + return -1; + } + + if (do_rapl & RAPL_AMD_F17H) { + msr_name = "MSR_RAPL_PWR_UNIT"; + if (get_msr(cpu, MSR_RAPL_PWR_UNIT, &msr)) + return -1; + } else { + msr_name = "MSR_RAPL_POWER_UNIT"; + if (get_msr(cpu, MSR_RAPL_POWER_UNIT, &msr)) + return -1; + } + + fprintf(outf, "cpu%d: %s: 0x%08llx (%f Watts, %f Joules, %f sec.)\n", cpu, msr_name, msr, + rapl_power_units, rapl_energy_units, rapl_time_units); + + if (do_rapl & RAPL_PKG_POWER_INFO) { + + if (get_msr(cpu, MSR_PKG_POWER_INFO, &msr)) + return -5; + + + fprintf(outf, "cpu%d: MSR_PKG_POWER_INFO: 0x%08llx (%.0f W TDP, RAPL %.0f - %.0f W, %f sec.)\n", + cpu, msr, + ((msr >> 0) & RAPL_POWER_GRANULARITY) * rapl_power_units, + ((msr >> 16) & RAPL_POWER_GRANULARITY) * rapl_power_units, + ((msr >> 32) & RAPL_POWER_GRANULARITY) * rapl_power_units, + ((msr >> 48) & RAPL_TIME_GRANULARITY) * rapl_time_units); + + } + if (do_rapl & RAPL_PKG) { + + if (get_msr(cpu, MSR_PKG_POWER_LIMIT, &msr)) + return -9; + + fprintf(outf, "cpu%d: MSR_PKG_POWER_LIMIT: 0x%08llx (%slocked)\n", + cpu, msr, (msr >> 63) & 1 ? "" : "UN"); + + print_power_limit_msr(cpu, msr, "PKG Limit #1"); + fprintf(outf, "cpu%d: PKG Limit #2: %sabled (%f Watts, %f* sec, clamp %sabled)\n", + cpu, + ((msr >> 47) & 1) ? "EN" : "DIS", + ((msr >> 32) & 0x7FFF) * rapl_power_units, + (1.0 + (((msr >> 54) & 0x3)/4.0)) * (1 << ((msr >> 49) & 0x1F)) * rapl_time_units, + ((msr >> 48) & 1) ? "EN" : "DIS"); + } + + if (do_rapl & RAPL_DRAM_POWER_INFO) { + if (get_msr(cpu, MSR_DRAM_POWER_INFO, &msr)) + return -6; + + fprintf(outf, "cpu%d: MSR_DRAM_POWER_INFO,: 0x%08llx (%.0f W TDP, RAPL %.0f - %.0f W, %f sec.)\n", + cpu, msr, + ((msr >> 0) & RAPL_POWER_GRANULARITY) * rapl_power_units, + ((msr >> 16) & RAPL_POWER_GRANULARITY) * rapl_power_units, + ((msr >> 32) & RAPL_POWER_GRANULARITY) * rapl_power_units, + ((msr >> 48) & RAPL_TIME_GRANULARITY) * rapl_time_units); + } + if (do_rapl & RAPL_DRAM) { + if (get_msr(cpu, MSR_DRAM_POWER_LIMIT, &msr)) + return -9; + fprintf(outf, "cpu%d: MSR_DRAM_POWER_LIMIT: 0x%08llx (%slocked)\n", + cpu, msr, (msr >> 31) & 1 ? "" : "UN"); + + print_power_limit_msr(cpu, msr, "DRAM Limit"); + } + if (do_rapl & RAPL_CORE_POLICY) { + if (get_msr(cpu, MSR_PP0_POLICY, &msr)) + return -7; + + fprintf(outf, "cpu%d: MSR_PP0_POLICY: %lld\n", cpu, msr & 0xF); + } + if (do_rapl & RAPL_CORES_POWER_LIMIT) { + if (get_msr(cpu, MSR_PP0_POWER_LIMIT, &msr)) + return -9; + fprintf(outf, "cpu%d: MSR_PP0_POWER_LIMIT: 0x%08llx (%slocked)\n", + cpu, msr, (msr >> 31) & 1 ? "" : "UN"); + print_power_limit_msr(cpu, msr, "Cores Limit"); + } + if (do_rapl & RAPL_GFX) { + if (get_msr(cpu, MSR_PP1_POLICY, &msr)) + return -8; + + fprintf(outf, "cpu%d: MSR_PP1_POLICY: %lld\n", cpu, msr & 0xF); + + if (get_msr(cpu, MSR_PP1_POWER_LIMIT, &msr)) + return -9; + fprintf(outf, "cpu%d: MSR_PP1_POWER_LIMIT: 0x%08llx (%slocked)\n", + cpu, msr, (msr >> 31) & 1 ? "" : "UN"); + print_power_limit_msr(cpu, msr, "GFX Limit"); + } + return 0; +} + +/* + * SNB adds support for additional MSRs: + * + * MSR_PKG_C7_RESIDENCY 0x000003fa + * MSR_CORE_C7_RESIDENCY 0x000003fe + * MSR_PKG_C2_RESIDENCY 0x0000060d + */ + +int has_snb_msrs(unsigned int family, unsigned int model) +{ + if (!genuine_intel) + return 0; + + switch (model) { + case INTEL_FAM6_SANDYBRIDGE: + case INTEL_FAM6_SANDYBRIDGE_X: + case INTEL_FAM6_IVYBRIDGE: /* IVB */ + case INTEL_FAM6_IVYBRIDGE_X: /* IVB Xeon */ + case INTEL_FAM6_HASWELL: /* HSW */ + case INTEL_FAM6_HASWELL_X: /* HSW */ + case INTEL_FAM6_HASWELL_L: /* HSW */ + case INTEL_FAM6_HASWELL_G: /* HSW */ + case INTEL_FAM6_BROADWELL: /* BDW */ + case INTEL_FAM6_BROADWELL_G: /* BDW */ + case INTEL_FAM6_BROADWELL_X: /* BDX */ + case INTEL_FAM6_SKYLAKE_L: /* SKL */ + case INTEL_FAM6_CANNONLAKE_L: /* CNL */ + case INTEL_FAM6_SKYLAKE_X: /* SKX */ + case INTEL_FAM6_ATOM_GOLDMONT: /* BXT */ + case INTEL_FAM6_ATOM_GOLDMONT_PLUS: + case INTEL_FAM6_ATOM_GOLDMONT_D: /* DNV */ + case INTEL_FAM6_ATOM_TREMONT: /* EHL */ + case INTEL_FAM6_ATOM_TREMONT_D: /* JVL */ + return 1; + } + return 0; +} + +/* + * HSW ULT added support for C8/C9/C10 MSRs: + * + * MSR_PKG_C8_RESIDENCY 0x00000630 + * MSR_PKG_C9_RESIDENCY 0x00000631 + * MSR_PKG_C10_RESIDENCY 0x00000632 + * + * MSR_PKGC8_IRTL 0x00000633 + * MSR_PKGC9_IRTL 0x00000634 + * MSR_PKGC10_IRTL 0x00000635 + * + */ +int has_c8910_msrs(unsigned int family, unsigned int model) +{ + if (!genuine_intel) + return 0; + + switch (model) { + case INTEL_FAM6_HASWELL_L: /* HSW */ + case INTEL_FAM6_BROADWELL: /* BDW */ + case INTEL_FAM6_SKYLAKE_L: /* SKL */ + case INTEL_FAM6_CANNONLAKE_L: /* CNL */ + case INTEL_FAM6_ATOM_GOLDMONT: /* BXT */ + case INTEL_FAM6_ATOM_GOLDMONT_PLUS: + case INTEL_FAM6_ATOM_TREMONT: /* EHL */ + return 1; + } + return 0; +} + +/* + * SKL adds support for additional MSRS: + * + * MSR_PKG_WEIGHTED_CORE_C0_RES 0x00000658 + * MSR_PKG_ANY_CORE_C0_RES 0x00000659 + * MSR_PKG_ANY_GFXE_C0_RES 0x0000065A + * MSR_PKG_BOTH_CORE_GFXE_C0_RES 0x0000065B + */ +int has_skl_msrs(unsigned int family, unsigned int model) +{ + if (!genuine_intel) + return 0; + + switch (model) { + case INTEL_FAM6_SKYLAKE_L: /* SKL */ + case INTEL_FAM6_CANNONLAKE_L: /* CNL */ + return 1; + } + return 0; +} + +int is_slm(unsigned int family, unsigned int model) +{ + if (!genuine_intel) + return 0; + switch (model) { + case INTEL_FAM6_ATOM_SILVERMONT: /* BYT */ + case INTEL_FAM6_ATOM_SILVERMONT_D: /* AVN */ + return 1; + } + return 0; +} + +int is_knl(unsigned int family, unsigned int model) +{ + if (!genuine_intel) + return 0; + switch (model) { + case INTEL_FAM6_XEON_PHI_KNL: /* KNL */ + return 1; + } + return 0; +} + +int is_cnl(unsigned int family, unsigned int model) +{ + if (!genuine_intel) + return 0; + + switch (model) { + case INTEL_FAM6_CANNONLAKE_L: /* CNL */ + return 1; + } + + return 0; +} + +unsigned int get_aperf_mperf_multiplier(unsigned int family, unsigned int model) +{ + if (is_knl(family, model)) + return 1024; + return 1; +} + +#define SLM_BCLK_FREQS 5 +double slm_freq_table[SLM_BCLK_FREQS] = { 83.3, 100.0, 133.3, 116.7, 80.0}; + +double slm_bclk(void) +{ + unsigned long long msr = 3; + unsigned int i; + double freq; + + if (get_msr(base_cpu, MSR_FSB_FREQ, &msr)) + fprintf(outf, "SLM BCLK: unknown\n"); + + i = msr & 0xf; + if (i >= SLM_BCLK_FREQS) { + fprintf(outf, "SLM BCLK[%d] invalid\n", i); + i = 3; + } + freq = slm_freq_table[i]; + + if (!quiet) + fprintf(outf, "SLM BCLK: %.1f Mhz\n", freq); + + return freq; +} + +double discover_bclk(unsigned int family, unsigned int model) +{ + if (has_snb_msrs(family, model) || is_knl(family, model)) + return 100.00; + else if (is_slm(family, model)) + return slm_bclk(); + else + return 133.33; +} + +/* + * MSR_IA32_TEMPERATURE_TARGET indicates the temperature where + * the Thermal Control Circuit (TCC) activates. + * This is usually equal to tjMax. + * + * Older processors do not have this MSR, so there we guess, + * but also allow cmdline over-ride with -T. + * + * Several MSR temperature values are in units of degrees-C + * below this value, including the Digital Thermal Sensor (DTS), + * Package Thermal Management Sensor (PTM), and thermal event thresholds. + */ +int set_temperature_target(struct thread_data *t, struct core_data *c, struct pkg_data *p) +{ + unsigned long long msr; + unsigned int target_c_local; + int cpu; + + /* tcc_activation_temp is used only for dts or ptm */ + if (!(do_dts || do_ptm)) + return 0; + + /* this is a per-package concept */ + if (!(t->flags & CPU_IS_FIRST_THREAD_IN_CORE) || !(t->flags & CPU_IS_FIRST_CORE_IN_PACKAGE)) + return 0; + + cpu = t->cpu_id; + if (cpu_migrate(cpu)) { + fprintf(outf, "Could not migrate to CPU %d\n", cpu); + return -1; + } + + if (tcc_activation_temp_override != 0) { + tcc_activation_temp = tcc_activation_temp_override; + fprintf(outf, "cpu%d: Using cmdline TCC Target (%d C)\n", + cpu, tcc_activation_temp); + return 0; + } + + /* Temperature Target MSR is Nehalem and newer only */ + if (!do_nhm_platform_info) + goto guess; + + if (get_msr(base_cpu, MSR_IA32_TEMPERATURE_TARGET, &msr)) + goto guess; + + target_c_local = (msr >> 16) & 0xFF; + + if (!quiet) + fprintf(outf, "cpu%d: MSR_IA32_TEMPERATURE_TARGET: 0x%08llx (%d C)\n", + cpu, msr, target_c_local); + + if (!target_c_local) + goto guess; + + tcc_activation_temp = target_c_local; + + return 0; + +guess: + tcc_activation_temp = TJMAX_DEFAULT; + fprintf(outf, "cpu%d: Guessing tjMax %d C, Please use -T to specify\n", + cpu, tcc_activation_temp); + + return 0; +} + +void decode_feature_control_msr(void) +{ + unsigned long long msr; + + if (!get_msr(base_cpu, MSR_IA32_FEAT_CTL, &msr)) + fprintf(outf, "cpu%d: MSR_IA32_FEATURE_CONTROL: 0x%08llx (%sLocked %s)\n", + base_cpu, msr, + msr & FEAT_CTL_LOCKED ? "" : "UN-", + msr & (1 << 18) ? "SGX" : ""); +} + +void decode_misc_enable_msr(void) +{ + unsigned long long msr; + + if (!genuine_intel) + return; + + if (!get_msr(base_cpu, MSR_IA32_MISC_ENABLE, &msr)) + fprintf(outf, "cpu%d: MSR_IA32_MISC_ENABLE: 0x%08llx (%sTCC %sEIST %sMWAIT %sPREFETCH %sTURBO)\n", + base_cpu, msr, + msr & MSR_IA32_MISC_ENABLE_TM1 ? "" : "No-", + msr & MSR_IA32_MISC_ENABLE_ENHANCED_SPEEDSTEP ? "" : "No-", + msr & MSR_IA32_MISC_ENABLE_MWAIT ? "" : "No-", + msr & MSR_IA32_MISC_ENABLE_PREFETCH_DISABLE ? "No-" : "", + msr & MSR_IA32_MISC_ENABLE_TURBO_DISABLE ? "No-" : ""); +} + +void decode_misc_feature_control(void) +{ + unsigned long long msr; + + if (!has_misc_feature_control) + return; + + if (!get_msr(base_cpu, MSR_MISC_FEATURE_CONTROL, &msr)) + fprintf(outf, "cpu%d: MSR_MISC_FEATURE_CONTROL: 0x%08llx (%sL2-Prefetch %sL2-Prefetch-pair %sL1-Prefetch %sL1-IP-Prefetch)\n", + base_cpu, msr, + msr & (0 << 0) ? "No-" : "", + msr & (1 << 0) ? "No-" : "", + msr & (2 << 0) ? "No-" : "", + msr & (3 << 0) ? "No-" : ""); +} +/* + * Decode MSR_MISC_PWR_MGMT + * + * Decode the bits according to the Nehalem documentation + * bit[0] seems to continue to have same meaning going forward + * bit[1] less so... + */ +void decode_misc_pwr_mgmt_msr(void) +{ + unsigned long long msr; + + if (!do_nhm_platform_info) + return; + + if (no_MSR_MISC_PWR_MGMT) + return; + + if (!get_msr(base_cpu, MSR_MISC_PWR_MGMT, &msr)) + fprintf(outf, "cpu%d: MSR_MISC_PWR_MGMT: 0x%08llx (%sable-EIST_Coordination %sable-EPB %sable-OOB)\n", + base_cpu, msr, + msr & (1 << 0) ? "DIS" : "EN", + msr & (1 << 1) ? "EN" : "DIS", + msr & (1 << 8) ? "EN" : "DIS"); +} +/* + * Decode MSR_CC6_DEMOTION_POLICY_CONFIG, MSR_MC6_DEMOTION_POLICY_CONFIG + * + * This MSRs are present on Silvermont processors, + * Intel Atom processor E3000 series (Baytrail), and friends. + */ +void decode_c6_demotion_policy_msr(void) +{ + unsigned long long msr; + + if (!get_msr(base_cpu, MSR_CC6_DEMOTION_POLICY_CONFIG, &msr)) + fprintf(outf, "cpu%d: MSR_CC6_DEMOTION_POLICY_CONFIG: 0x%08llx (%sable-CC6-Demotion)\n", + base_cpu, msr, msr & (1 << 0) ? "EN" : "DIS"); + + if (!get_msr(base_cpu, MSR_MC6_DEMOTION_POLICY_CONFIG, &msr)) + fprintf(outf, "cpu%d: MSR_MC6_DEMOTION_POLICY_CONFIG: 0x%08llx (%sable-MC6-Demotion)\n", + base_cpu, msr, msr & (1 << 0) ? "EN" : "DIS"); +} + +/* + * When models are the same, for the purpose of turbostat, reuse + */ +unsigned int intel_model_duplicates(unsigned int model) +{ + + switch(model) { + case INTEL_FAM6_NEHALEM_EP: /* Core i7, Xeon 5500 series - Bloomfield, Gainstown NHM-EP */ + case INTEL_FAM6_NEHALEM: /* Core i7 and i5 Processor - Clarksfield, Lynnfield, Jasper Forest */ + case 0x1F: /* Core i7 and i5 Processor - Nehalem */ + case INTEL_FAM6_WESTMERE: /* Westmere Client - Clarkdale, Arrandale */ + case INTEL_FAM6_WESTMERE_EP: /* Westmere EP - Gulftown */ + return INTEL_FAM6_NEHALEM; + + case INTEL_FAM6_NEHALEM_EX: /* Nehalem-EX Xeon - Beckton */ + case INTEL_FAM6_WESTMERE_EX: /* Westmere-EX Xeon - Eagleton */ + return INTEL_FAM6_NEHALEM_EX; + + case INTEL_FAM6_XEON_PHI_KNM: + return INTEL_FAM6_XEON_PHI_KNL; + + case INTEL_FAM6_BROADWELL_X: + case INTEL_FAM6_BROADWELL_D: /* BDX-DE */ + return INTEL_FAM6_BROADWELL_X; + + case INTEL_FAM6_SKYLAKE_L: + case INTEL_FAM6_SKYLAKE: + case INTEL_FAM6_KABYLAKE_L: + case INTEL_FAM6_KABYLAKE: + case INTEL_FAM6_COMETLAKE_L: + case INTEL_FAM6_COMETLAKE: + return INTEL_FAM6_SKYLAKE_L; + + case INTEL_FAM6_ICELAKE_L: + case INTEL_FAM6_ICELAKE_NNPI: + case INTEL_FAM6_TIGERLAKE_L: + case INTEL_FAM6_TIGERLAKE: + case INTEL_FAM6_ROCKETLAKE: + case INTEL_FAM6_LAKEFIELD: + case INTEL_FAM6_ALDERLAKE: + return INTEL_FAM6_CANNONLAKE_L; + + case INTEL_FAM6_ATOM_TREMONT_L: + return INTEL_FAM6_ATOM_TREMONT; + + case INTEL_FAM6_ICELAKE_X: + case INTEL_FAM6_SAPPHIRERAPIDS_X: + return INTEL_FAM6_SKYLAKE_X; + } + return model; +} + +void print_dev_latency(void) +{ + char *path = "/dev/cpu_dma_latency"; + int fd; + int value; + int retval; + + fd = open(path, O_RDONLY); + if (fd < 0) { + warn("fopen %s\n", path); + return; + } + + retval = read(fd, (void *)&value, sizeof(int)); + if (retval != sizeof(int)) { + warn("read failed %s\n", path); + close(fd); + return; + } + fprintf(outf, "/dev/cpu_dma_latency: %d usec (%s)\n", + value, value == 2000000000 ? "default" : "constrained"); + + close(fd); +} + +void process_cpuid() +{ + unsigned int eax, ebx, ecx, edx; + unsigned int fms, family, model, stepping, ecx_flags, edx_flags; + unsigned int has_turbo; + + eax = ebx = ecx = edx = 0; + + __cpuid(0, max_level, ebx, ecx, edx); + + if (ebx == 0x756e6547 && ecx == 0x6c65746e && edx == 0x49656e69) + genuine_intel = 1; + else if (ebx == 0x68747541 && ecx == 0x444d4163 && edx == 0x69746e65) + authentic_amd = 1; + else if (ebx == 0x6f677948 && ecx == 0x656e6975 && edx == 0x6e65476e) + hygon_genuine = 1; + + if (!quiet) + fprintf(outf, "CPUID(0): %.4s%.4s%.4s ", + (char *)&ebx, (char *)&edx, (char *)&ecx); + + __cpuid(1, fms, ebx, ecx, edx); + family = (fms >> 8) & 0xf; + model = (fms >> 4) & 0xf; + stepping = fms & 0xf; + if (family == 0xf) + family += (fms >> 20) & 0xff; + if (family >= 6) + model += ((fms >> 16) & 0xf) << 4; + ecx_flags = ecx; + edx_flags = edx; + + /* + * check max extended function levels of CPUID. + * This is needed to check for invariant TSC. + * This check is valid for both Intel and AMD. + */ + ebx = ecx = edx = 0; + __cpuid(0x80000000, max_extended_level, ebx, ecx, edx); + + if (!quiet) { + fprintf(outf, "0x%x CPUID levels; 0x%x xlevels; family:model:stepping 0x%x:%x:%x (%d:%d:%d)\n", + max_level, max_extended_level, family, model, stepping, family, model, stepping); + fprintf(outf, "CPUID(1): %s %s %s %s %s %s %s %s %s %s\n", + ecx_flags & (1 << 0) ? "SSE3" : "-", + ecx_flags & (1 << 3) ? "MONITOR" : "-", + ecx_flags & (1 << 6) ? "SMX" : "-", + ecx_flags & (1 << 7) ? "EIST" : "-", + ecx_flags & (1 << 8) ? "TM2" : "-", + edx_flags & (1 << 4) ? "TSC" : "-", + edx_flags & (1 << 5) ? "MSR" : "-", + edx_flags & (1 << 22) ? "ACPI-TM" : "-", + edx_flags & (1 << 28) ? "HT" : "-", + edx_flags & (1 << 29) ? "TM" : "-"); + } + if (genuine_intel) + model = intel_model_duplicates(model); + + if (!(edx_flags & (1 << 5))) + errx(1, "CPUID: no MSR"); + + if (max_extended_level >= 0x80000007) { + + /* + * Non-Stop TSC is advertised by CPUID.EAX=0x80000007: EDX.bit8 + * this check is valid for both Intel and AMD + */ + __cpuid(0x80000007, eax, ebx, ecx, edx); + has_invariant_tsc = edx & (1 << 8); + } + + /* + * APERF/MPERF is advertised by CPUID.EAX=0x6: ECX.bit0 + * this check is valid for both Intel and AMD + */ + + __cpuid(0x6, eax, ebx, ecx, edx); + has_aperf = ecx & (1 << 0); + if (has_aperf) { + BIC_PRESENT(BIC_Avg_MHz); + BIC_PRESENT(BIC_Busy); + BIC_PRESENT(BIC_Bzy_MHz); + } + do_dts = eax & (1 << 0); + if (do_dts) + BIC_PRESENT(BIC_CoreTmp); + has_turbo = eax & (1 << 1); + do_ptm = eax & (1 << 6); + if (do_ptm) + BIC_PRESENT(BIC_PkgTmp); + has_hwp = eax & (1 << 7); + has_hwp_notify = eax & (1 << 8); + has_hwp_activity_window = eax & (1 << 9); + has_hwp_epp = eax & (1 << 10); + has_hwp_pkg = eax & (1 << 11); + has_epb = ecx & (1 << 3); + + if (!quiet) + fprintf(outf, "CPUID(6): %sAPERF, %sTURBO, %sDTS, %sPTM, %sHWP, " + "%sHWPnotify, %sHWPwindow, %sHWPepp, %sHWPpkg, %sEPB\n", + has_aperf ? "" : "No-", + has_turbo ? "" : "No-", + do_dts ? "" : "No-", + do_ptm ? "" : "No-", + has_hwp ? "" : "No-", + has_hwp_notify ? "" : "No-", + has_hwp_activity_window ? "" : "No-", + has_hwp_epp ? "" : "No-", + has_hwp_pkg ? "" : "No-", + has_epb ? "" : "No-"); + + if (!quiet) + decode_misc_enable_msr(); + + + if (max_level >= 0x7 && !quiet) { + int has_sgx; + + ecx = 0; + + __cpuid_count(0x7, 0, eax, ebx, ecx, edx); + + has_sgx = ebx & (1 << 2); + fprintf(outf, "CPUID(7): %sSGX\n", has_sgx ? "" : "No-"); + + if (has_sgx) + decode_feature_control_msr(); + } + + if (max_level >= 0x15) { + unsigned int eax_crystal; + unsigned int ebx_tsc; + + /* + * CPUID 15H TSC/Crystal ratio, possibly Crystal Hz + */ + eax_crystal = ebx_tsc = crystal_hz = edx = 0; + __cpuid(0x15, eax_crystal, ebx_tsc, crystal_hz, edx); + + if (ebx_tsc != 0) { + + if (!quiet && (ebx != 0)) + fprintf(outf, "CPUID(0x15): eax_crystal: %d ebx_tsc: %d ecx_crystal_hz: %d\n", + eax_crystal, ebx_tsc, crystal_hz); + + if (crystal_hz == 0) + switch(model) { + case INTEL_FAM6_SKYLAKE_L: /* SKL */ + crystal_hz = 24000000; /* 24.0 MHz */ + break; + case INTEL_FAM6_ATOM_GOLDMONT_D: /* DNV */ + crystal_hz = 25000000; /* 25.0 MHz */ + break; + case INTEL_FAM6_ATOM_GOLDMONT: /* BXT */ + case INTEL_FAM6_ATOM_GOLDMONT_PLUS: + crystal_hz = 19200000; /* 19.2 MHz */ + break; + default: + crystal_hz = 0; + } + + if (crystal_hz) { + tsc_hz = (unsigned long long) crystal_hz * ebx_tsc / eax_crystal; + if (!quiet) + fprintf(outf, "TSC: %lld MHz (%d Hz * %d / %d / 1000000)\n", + tsc_hz / 1000000, crystal_hz, ebx_tsc, eax_crystal); + } + } + } + if (max_level >= 0x16) { + unsigned int base_mhz, max_mhz, bus_mhz, edx; + + /* + * CPUID 16H Base MHz, Max MHz, Bus MHz + */ + base_mhz = max_mhz = bus_mhz = edx = 0; + + __cpuid(0x16, base_mhz, max_mhz, bus_mhz, edx); + if (!quiet) + fprintf(outf, "CPUID(0x16): base_mhz: %d max_mhz: %d bus_mhz: %d\n", + base_mhz, max_mhz, bus_mhz); + } + + if (has_aperf) + aperf_mperf_multiplier = get_aperf_mperf_multiplier(family, model); + + BIC_PRESENT(BIC_IRQ); + BIC_PRESENT(BIC_TSC_MHz); + + if (probe_nhm_msrs(family, model)) { + do_nhm_platform_info = 1; + BIC_PRESENT(BIC_CPU_c1); + BIC_PRESENT(BIC_CPU_c3); + BIC_PRESENT(BIC_CPU_c6); + BIC_PRESENT(BIC_SMI); + } + do_snb_cstates = has_snb_msrs(family, model); + + if (do_snb_cstates) + BIC_PRESENT(BIC_CPU_c7); + + do_irtl_snb = has_snb_msrs(family, model); + if (do_snb_cstates && (pkg_cstate_limit >= PCL__2)) + BIC_PRESENT(BIC_Pkgpc2); + if (pkg_cstate_limit >= PCL__3) + BIC_PRESENT(BIC_Pkgpc3); + if (pkg_cstate_limit >= PCL__6) + BIC_PRESENT(BIC_Pkgpc6); + if (do_snb_cstates && (pkg_cstate_limit >= PCL__7)) + BIC_PRESENT(BIC_Pkgpc7); + if (has_slv_msrs(family, model)) { + BIC_NOT_PRESENT(BIC_Pkgpc2); + BIC_NOT_PRESENT(BIC_Pkgpc3); + BIC_PRESENT(BIC_Pkgpc6); + BIC_NOT_PRESENT(BIC_Pkgpc7); + BIC_PRESENT(BIC_Mod_c6); + use_c1_residency_msr = 1; + } + if (is_jvl(family, model)) { + BIC_NOT_PRESENT(BIC_CPU_c3); + BIC_NOT_PRESENT(BIC_CPU_c7); + BIC_NOT_PRESENT(BIC_Pkgpc2); + BIC_NOT_PRESENT(BIC_Pkgpc3); + BIC_NOT_PRESENT(BIC_Pkgpc6); + BIC_NOT_PRESENT(BIC_Pkgpc7); + } + if (is_dnv(family, model)) { + BIC_PRESENT(BIC_CPU_c1); + BIC_NOT_PRESENT(BIC_CPU_c3); + BIC_NOT_PRESENT(BIC_Pkgpc3); + BIC_NOT_PRESENT(BIC_CPU_c7); + BIC_NOT_PRESENT(BIC_Pkgpc7); + use_c1_residency_msr = 1; + } + if (is_skx(family, model)) { + BIC_NOT_PRESENT(BIC_CPU_c3); + BIC_NOT_PRESENT(BIC_Pkgpc3); + BIC_NOT_PRESENT(BIC_CPU_c7); + BIC_NOT_PRESENT(BIC_Pkgpc7); + } + if (is_bdx(family, model)) { + BIC_NOT_PRESENT(BIC_CPU_c7); + BIC_NOT_PRESENT(BIC_Pkgpc7); + } + if (has_c8910_msrs(family, model)) { + if (pkg_cstate_limit >= PCL__8) + BIC_PRESENT(BIC_Pkgpc8); + if (pkg_cstate_limit >= PCL__9) + BIC_PRESENT(BIC_Pkgpc9); + if (pkg_cstate_limit >= PCL_10) + BIC_PRESENT(BIC_Pkgpc10); + } + do_irtl_hsw = has_c8910_msrs(family, model); + if (has_skl_msrs(family, model)) { + BIC_PRESENT(BIC_Totl_c0); + BIC_PRESENT(BIC_Any_c0); + BIC_PRESENT(BIC_GFX_c0); + BIC_PRESENT(BIC_CPUGFX); + } + do_slm_cstates = is_slm(family, model); + do_knl_cstates = is_knl(family, model); + + if (do_slm_cstates || do_knl_cstates || is_cnl(family, model) || + is_ehl(family, model)) + BIC_NOT_PRESENT(BIC_CPU_c3); + + if (!quiet) + decode_misc_pwr_mgmt_msr(); + + if (!quiet && has_slv_msrs(family, model)) + decode_c6_demotion_policy_msr(); + + rapl_probe(family, model); + perf_limit_reasons_probe(family, model); + automatic_cstate_conversion_probe(family, model); + + if (!quiet) + dump_cstate_pstate_config_info(family, model); + + if (!quiet) + print_dev_latency(); + if (!quiet) + dump_sysfs_cstate_config(); + if (!quiet) + dump_sysfs_pstate_config(); + + if (has_skl_msrs(family, model)) + calculate_tsc_tweak(); + + if (!access("/sys/class/drm/card0/power/rc6_residency_ms", R_OK)) + BIC_PRESENT(BIC_GFX_rc6); + + if (!access("/sys/class/graphics/fb0/device/drm/card0/gt_cur_freq_mhz", R_OK)) + BIC_PRESENT(BIC_GFXMHz); + + if (!access("/sys/class/graphics/fb0/device/drm/card0/gt_act_freq_mhz", R_OK)) + BIC_PRESENT(BIC_GFXACTMHz); + + if (!access("/sys/devices/system/cpu/cpuidle/low_power_idle_cpu_residency_us", R_OK)) + BIC_PRESENT(BIC_CPU_LPI); + else + BIC_NOT_PRESENT(BIC_CPU_LPI); + + if (!access(sys_lpi_file_sysfs, R_OK)) { + sys_lpi_file = sys_lpi_file_sysfs; + BIC_PRESENT(BIC_SYS_LPI); + } else if (!access(sys_lpi_file_debugfs, R_OK)) { + sys_lpi_file = sys_lpi_file_debugfs; + BIC_PRESENT(BIC_SYS_LPI); + } else { + sys_lpi_file_sysfs = NULL; + BIC_NOT_PRESENT(BIC_SYS_LPI); + } + + if (!quiet) + decode_misc_feature_control(); + + return; +} + +/* + * in /dev/cpu/ return success for names that are numbers + * ie. filter out ".", "..", "microcode". + */ +int dir_filter(const struct dirent *dirp) +{ + if (isdigit(dirp->d_name[0])) + return 1; + else + return 0; +} + +int open_dev_cpu_msr(int dummy1) +{ + return 0; +} + +void topology_probe() +{ + int i; + int max_core_id = 0; + int max_package_id = 0; + int max_die_id = 0; + int max_siblings = 0; + + /* Initialize num_cpus, max_cpu_num */ + set_max_cpu_num(); + topo.num_cpus = 0; + for_all_proc_cpus(count_cpus); + if (!summary_only && topo.num_cpus > 1) + BIC_PRESENT(BIC_CPU); + + if (debug > 1) + fprintf(outf, "num_cpus %d max_cpu_num %d\n", topo.num_cpus, topo.max_cpu_num); + + cpus = calloc(1, (topo.max_cpu_num + 1) * sizeof(struct cpu_topology)); + if (cpus == NULL) + err(1, "calloc cpus"); + + /* + * Allocate and initialize cpu_present_set + */ + cpu_present_set = CPU_ALLOC((topo.max_cpu_num + 1)); + if (cpu_present_set == NULL) + err(3, "CPU_ALLOC"); + cpu_present_setsize = CPU_ALLOC_SIZE((topo.max_cpu_num + 1)); + CPU_ZERO_S(cpu_present_setsize, cpu_present_set); + for_all_proc_cpus(mark_cpu_present); + + /* + * Validate that all cpus in cpu_subset are also in cpu_present_set + */ + for (i = 0; i < CPU_SUBSET_MAXCPUS; ++i) { + if (CPU_ISSET_S(i, cpu_subset_size, cpu_subset)) + if (!CPU_ISSET_S(i, cpu_present_setsize, cpu_present_set)) + err(1, "cpu%d not present", i); + } + + /* + * Allocate and initialize cpu_affinity_set + */ + cpu_affinity_set = CPU_ALLOC((topo.max_cpu_num + 1)); + if (cpu_affinity_set == NULL) + err(3, "CPU_ALLOC"); + cpu_affinity_setsize = CPU_ALLOC_SIZE((topo.max_cpu_num + 1)); + CPU_ZERO_S(cpu_affinity_setsize, cpu_affinity_set); + + for_all_proc_cpus(init_thread_id); + + /* + * For online cpus + * find max_core_id, max_package_id + */ + for (i = 0; i <= topo.max_cpu_num; ++i) { + int siblings; + + if (cpu_is_not_present(i)) { + if (debug > 1) + fprintf(outf, "cpu%d NOT PRESENT\n", i); + continue; + } + + cpus[i].logical_cpu_id = i; + + /* get package information */ + cpus[i].physical_package_id = get_physical_package_id(i); + if (cpus[i].physical_package_id > max_package_id) + max_package_id = cpus[i].physical_package_id; + + /* get die information */ + cpus[i].die_id = get_die_id(i); + if (cpus[i].die_id > max_die_id) + max_die_id = cpus[i].die_id; + + /* get numa node information */ + cpus[i].physical_node_id = get_physical_node_id(&cpus[i]); + if (cpus[i].physical_node_id > topo.max_node_num) + topo.max_node_num = cpus[i].physical_node_id; + + /* get core information */ + cpus[i].physical_core_id = get_core_id(i); + if (cpus[i].physical_core_id > max_core_id) + max_core_id = cpus[i].physical_core_id; + + /* get thread information */ + siblings = get_thread_siblings(&cpus[i]); + if (siblings > max_siblings) + max_siblings = siblings; + if (cpus[i].thread_id == 0) + topo.num_cores++; + } + + topo.cores_per_node = max_core_id + 1; + if (debug > 1) + fprintf(outf, "max_core_id %d, sizing for %d cores per package\n", + max_core_id, topo.cores_per_node); + if (!summary_only && topo.cores_per_node > 1) + BIC_PRESENT(BIC_Core); + + topo.num_die = max_die_id + 1; + if (debug > 1) + fprintf(outf, "max_die_id %d, sizing for %d die\n", + max_die_id, topo.num_die); + if (!summary_only && topo.num_die > 1) + BIC_PRESENT(BIC_Die); + + topo.num_packages = max_package_id + 1; + if (debug > 1) + fprintf(outf, "max_package_id %d, sizing for %d packages\n", + max_package_id, topo.num_packages); + if (!summary_only && topo.num_packages > 1) + BIC_PRESENT(BIC_Package); + + set_node_data(); + if (debug > 1) + fprintf(outf, "nodes_per_pkg %d\n", topo.nodes_per_pkg); + if (!summary_only && topo.nodes_per_pkg > 1) + BIC_PRESENT(BIC_Node); + + topo.threads_per_core = max_siblings; + if (debug > 1) + fprintf(outf, "max_siblings %d\n", max_siblings); + + if (debug < 1) + return; + + for (i = 0; i <= topo.max_cpu_num; ++i) { + if (cpu_is_not_present(i)) + continue; + fprintf(outf, + "cpu %d pkg %d die %d node %d lnode %d core %d thread %d\n", + i, cpus[i].physical_package_id, cpus[i].die_id, + cpus[i].physical_node_id, + cpus[i].logical_node_id, + cpus[i].physical_core_id, + cpus[i].thread_id); + } + +} + +void +allocate_counters(struct thread_data **t, struct core_data **c, + struct pkg_data **p) +{ + int i; + int num_cores = topo.cores_per_node * topo.nodes_per_pkg * + topo.num_packages; + int num_threads = topo.threads_per_core * num_cores; + + *t = calloc(num_threads, sizeof(struct thread_data)); + if (*t == NULL) + goto error; + + for (i = 0; i < num_threads; i++) + (*t)[i].cpu_id = -1; + + *c = calloc(num_cores, sizeof(struct core_data)); + if (*c == NULL) + goto error; + + for (i = 0; i < num_cores; i++) + (*c)[i].core_id = -1; + + *p = calloc(topo.num_packages, sizeof(struct pkg_data)); + if (*p == NULL) + goto error; + + for (i = 0; i < topo.num_packages; i++) + (*p)[i].package_id = i; + + return; +error: + err(1, "calloc counters"); +} +/* + * init_counter() + * + * set FIRST_THREAD_IN_CORE and FIRST_CORE_IN_PACKAGE + */ +void init_counter(struct thread_data *thread_base, struct core_data *core_base, + struct pkg_data *pkg_base, int cpu_id) +{ + int pkg_id = cpus[cpu_id].physical_package_id; + int node_id = cpus[cpu_id].logical_node_id; + int core_id = cpus[cpu_id].physical_core_id; + int thread_id = cpus[cpu_id].thread_id; + struct thread_data *t; + struct core_data *c; + struct pkg_data *p; + + + /* Workaround for systems where physical_node_id==-1 + * and logical_node_id==(-1 - topo.num_cpus) + */ + if (node_id < 0) + node_id = 0; + + t = GET_THREAD(thread_base, thread_id, core_id, node_id, pkg_id); + c = GET_CORE(core_base, core_id, node_id, pkg_id); + p = GET_PKG(pkg_base, pkg_id); + + t->cpu_id = cpu_id; + if (thread_id == 0) { + t->flags |= CPU_IS_FIRST_THREAD_IN_CORE; + if (cpu_is_first_core_in_package(cpu_id)) + t->flags |= CPU_IS_FIRST_CORE_IN_PACKAGE; + } + + c->core_id = core_id; + p->package_id = pkg_id; +} + + +int initialize_counters(int cpu_id) +{ + init_counter(EVEN_COUNTERS, cpu_id); + init_counter(ODD_COUNTERS, cpu_id); + return 0; +} + +void allocate_output_buffer() +{ + output_buffer = calloc(1, (1 + topo.num_cpus) * 2048); + outp = output_buffer; + if (outp == NULL) + err(-1, "calloc output buffer"); +} +void allocate_fd_percpu(void) +{ + fd_percpu = calloc(topo.max_cpu_num + 1, sizeof(int)); + if (fd_percpu == NULL) + err(-1, "calloc fd_percpu"); +} +void allocate_irq_buffers(void) +{ + irq_column_2_cpu = calloc(topo.num_cpus, sizeof(int)); + if (irq_column_2_cpu == NULL) + err(-1, "calloc %d", topo.num_cpus); + + irqs_per_cpu = calloc(topo.max_cpu_num + 1, sizeof(int)); + if (irqs_per_cpu == NULL) + err(-1, "calloc %d", topo.max_cpu_num + 1); +} +void setup_all_buffers(void) +{ + topology_probe(); + allocate_irq_buffers(); + allocate_fd_percpu(); + allocate_counters(&thread_even, &core_even, &package_even); + allocate_counters(&thread_odd, &core_odd, &package_odd); + allocate_output_buffer(); + for_all_proc_cpus(initialize_counters); +} + +void set_base_cpu(void) +{ + base_cpu = sched_getcpu(); + if (base_cpu < 0) + err(-ENODEV, "No valid cpus found"); + + if (debug > 1) + fprintf(outf, "base_cpu = %d\n", base_cpu); +} + +void turbostat_init() +{ + setup_all_buffers(); + set_base_cpu(); + check_dev_msr(); + check_permissions(); + process_cpuid(); + + + if (!quiet) + for_all_cpus(print_hwp, ODD_COUNTERS); + + if (!quiet) + for_all_cpus(print_epb, ODD_COUNTERS); + + if (!quiet) + for_all_cpus(print_perf_limit, ODD_COUNTERS); + + if (!quiet) + for_all_cpus(print_rapl, ODD_COUNTERS); + + for_all_cpus(set_temperature_target, ODD_COUNTERS); + + if (!quiet) + for_all_cpus(print_thermal, ODD_COUNTERS); + + if (!quiet && do_irtl_snb) + print_irtl(); +} + +int fork_it(char **argv) +{ + pid_t child_pid; + int status; + + snapshot_proc_sysfs_files(); + status = for_all_cpus(get_counters, EVEN_COUNTERS); + first_counter_read = 0; + if (status) + exit(status); + /* clear affinity side-effect of get_counters() */ + sched_setaffinity(0, cpu_present_setsize, cpu_present_set); + gettimeofday(&tv_even, (struct timezone *)NULL); + + child_pid = fork(); + if (!child_pid) { + /* child */ + execvp(argv[0], argv); + err(errno, "exec %s", argv[0]); + } else { + + /* parent */ + if (child_pid == -1) + err(1, "fork"); + + signal(SIGINT, SIG_IGN); + signal(SIGQUIT, SIG_IGN); + if (waitpid(child_pid, &status, 0) == -1) + err(status, "waitpid"); + + if (WIFEXITED(status)) + status = WEXITSTATUS(status); + } + /* + * n.b. fork_it() does not check for errors from for_all_cpus() + * because re-starting is problematic when forking + */ + snapshot_proc_sysfs_files(); + for_all_cpus(get_counters, ODD_COUNTERS); + gettimeofday(&tv_odd, (struct timezone *)NULL); + timersub(&tv_odd, &tv_even, &tv_delta); + if (for_all_cpus_2(delta_cpu, ODD_COUNTERS, EVEN_COUNTERS)) + fprintf(outf, "%s: Counter reset detected\n", progname); + else { + compute_average(EVEN_COUNTERS); + format_all_counters(EVEN_COUNTERS); + } + + fprintf(outf, "%.6f sec\n", tv_delta.tv_sec + tv_delta.tv_usec/1000000.0); + + flush_output_stderr(); + + return status; +} + +int get_and_dump_counters(void) +{ + int status; + + snapshot_proc_sysfs_files(); + status = for_all_cpus(get_counters, ODD_COUNTERS); + if (status) + return status; + + status = for_all_cpus(dump_counters, ODD_COUNTERS); + if (status) + return status; + + flush_output_stdout(); + + return status; +} + +void print_version() { + fprintf(outf, "turbostat version 20.09.30" + " - Len Brown <lenb@kernel.org>\n"); +} + +int add_counter(unsigned int msr_num, char *path, char *name, + unsigned int width, enum counter_scope scope, + enum counter_type type, enum counter_format format, int flags) +{ + struct msr_counter *msrp; + + msrp = calloc(1, sizeof(struct msr_counter)); + if (msrp == NULL) { + perror("calloc"); + exit(1); + } + + msrp->msr_num = msr_num; + strncpy(msrp->name, name, NAME_BYTES - 1); + if (path) + strncpy(msrp->path, path, PATH_BYTES - 1); + msrp->width = width; + msrp->type = type; + msrp->format = format; + msrp->flags = flags; + + switch (scope) { + + case SCOPE_CPU: + msrp->next = sys.tp; + sys.tp = msrp; + sys.added_thread_counters++; + if (sys.added_thread_counters > MAX_ADDED_THREAD_COUNTERS) { + fprintf(stderr, "exceeded max %d added thread counters\n", + MAX_ADDED_COUNTERS); + exit(-1); + } + break; + + case SCOPE_CORE: + msrp->next = sys.cp; + sys.cp = msrp; + sys.added_core_counters++; + if (sys.added_core_counters > MAX_ADDED_COUNTERS) { + fprintf(stderr, "exceeded max %d added core counters\n", + MAX_ADDED_COUNTERS); + exit(-1); + } + break; + + case SCOPE_PACKAGE: + msrp->next = sys.pp; + sys.pp = msrp; + sys.added_package_counters++; + if (sys.added_package_counters > MAX_ADDED_COUNTERS) { + fprintf(stderr, "exceeded max %d added package counters\n", + MAX_ADDED_COUNTERS); + exit(-1); + } + break; + } + + return 0; +} + +void parse_add_command(char *add_command) +{ + int msr_num = 0; + char *path = NULL; + char name_buffer[NAME_BYTES] = ""; + int width = 64; + int fail = 0; + enum counter_scope scope = SCOPE_CPU; + enum counter_type type = COUNTER_CYCLES; + enum counter_format format = FORMAT_DELTA; + + while (add_command) { + + if (sscanf(add_command, "msr0x%x", &msr_num) == 1) + goto next; + + if (sscanf(add_command, "msr%d", &msr_num) == 1) + goto next; + + if (*add_command == '/') { + path = add_command; + goto next; + } + + if (sscanf(add_command, "u%d", &width) == 1) { + if ((width == 32) || (width == 64)) + goto next; + width = 64; + } + if (!strncmp(add_command, "cpu", strlen("cpu"))) { + scope = SCOPE_CPU; + goto next; + } + if (!strncmp(add_command, "core", strlen("core"))) { + scope = SCOPE_CORE; + goto next; + } + if (!strncmp(add_command, "package", strlen("package"))) { + scope = SCOPE_PACKAGE; + goto next; + } + if (!strncmp(add_command, "cycles", strlen("cycles"))) { + type = COUNTER_CYCLES; + goto next; + } + if (!strncmp(add_command, "seconds", strlen("seconds"))) { + type = COUNTER_SECONDS; + goto next; + } + if (!strncmp(add_command, "usec", strlen("usec"))) { + type = COUNTER_USEC; + goto next; + } + if (!strncmp(add_command, "raw", strlen("raw"))) { + format = FORMAT_RAW; + goto next; + } + if (!strncmp(add_command, "delta", strlen("delta"))) { + format = FORMAT_DELTA; + goto next; + } + if (!strncmp(add_command, "percent", strlen("percent"))) { + format = FORMAT_PERCENT; + goto next; + } + + if (sscanf(add_command, "%18s,%*s", name_buffer) == 1) { /* 18 < NAME_BYTES */ + char *eos; + + eos = strchr(name_buffer, ','); + if (eos) + *eos = '\0'; + goto next; + } + +next: + add_command = strchr(add_command, ','); + if (add_command) { + *add_command = '\0'; + add_command++; + } + + } + if ((msr_num == 0) && (path == NULL)) { + fprintf(stderr, "--add: (msrDDD | msr0xXXX | /path_to_counter ) required\n"); + fail++; + } + + /* generate default column header */ + if (*name_buffer == '\0') { + if (width == 32) + sprintf(name_buffer, "M0x%x%s", msr_num, format == FORMAT_PERCENT ? "%" : ""); + else + sprintf(name_buffer, "M0X%x%s", msr_num, format == FORMAT_PERCENT ? "%" : ""); + } + + if (add_counter(msr_num, path, name_buffer, width, scope, type, format, 0)) + fail++; + + if (fail) { + help(); + exit(1); + } +} + +int is_deferred_skip(char *name) +{ + int i; + + for (i = 0; i < deferred_skip_index; ++i) + if (!strcmp(name, deferred_skip_names[i])) + return 1; + return 0; +} + +void probe_sysfs(void) +{ + char path[64]; + char name_buf[16]; + FILE *input; + int state; + char *sp; + + if (!DO_BIC(BIC_sysfs)) + return; + + for (state = 10; state >= 0; --state) { + + sprintf(path, "/sys/devices/system/cpu/cpu%d/cpuidle/state%d/name", + base_cpu, state); + input = fopen(path, "r"); + if (input == NULL) + continue; + if (!fgets(name_buf, sizeof(name_buf), input)) + err(1, "%s: failed to read file", path); + + /* truncate "C1-HSW\n" to "C1", or truncate "C1\n" to "C1" */ + sp = strchr(name_buf, '-'); + if (!sp) + sp = strchrnul(name_buf, '\n'); + *sp = '%'; + *(sp + 1) = '\0'; + + remove_underbar(name_buf); + + fclose(input); + + sprintf(path, "cpuidle/state%d/time", state); + + if (is_deferred_skip(name_buf)) + continue; + + add_counter(0, path, name_buf, 64, SCOPE_CPU, COUNTER_USEC, + FORMAT_PERCENT, SYSFS_PERCPU); + } + + for (state = 10; state >= 0; --state) { + + sprintf(path, "/sys/devices/system/cpu/cpu%d/cpuidle/state%d/name", + base_cpu, state); + input = fopen(path, "r"); + if (input == NULL) + continue; + if (!fgets(name_buf, sizeof(name_buf), input)) + err(1, "%s: failed to read file", path); + /* truncate "C1-HSW\n" to "C1", or truncate "C1\n" to "C1" */ + sp = strchr(name_buf, '-'); + if (!sp) + sp = strchrnul(name_buf, '\n'); + *sp = '\0'; + fclose(input); + + remove_underbar(name_buf); + + sprintf(path, "cpuidle/state%d/usage", state); + + if (is_deferred_skip(name_buf)) + continue; + + add_counter(0, path, name_buf, 64, SCOPE_CPU, COUNTER_ITEMS, + FORMAT_DELTA, SYSFS_PERCPU); + } + +} + + +/* + * parse cpuset with following syntax + * 1,2,4..6,8-10 and set bits in cpu_subset + */ +void parse_cpu_command(char *optarg) +{ + unsigned int start, end; + char *next; + + if (!strcmp(optarg, "core")) { + if (cpu_subset) + goto error; + show_core_only++; + return; + } + if (!strcmp(optarg, "package")) { + if (cpu_subset) + goto error; + show_pkg_only++; + return; + } + if (show_core_only || show_pkg_only) + goto error; + + cpu_subset = CPU_ALLOC(CPU_SUBSET_MAXCPUS); + if (cpu_subset == NULL) + err(3, "CPU_ALLOC"); + cpu_subset_size = CPU_ALLOC_SIZE(CPU_SUBSET_MAXCPUS); + + CPU_ZERO_S(cpu_subset_size, cpu_subset); + + next = optarg; + + while (next && *next) { + + if (*next == '-') /* no negative cpu numbers */ + goto error; + + start = strtoul(next, &next, 10); + + if (start >= CPU_SUBSET_MAXCPUS) + goto error; + CPU_SET_S(start, cpu_subset_size, cpu_subset); + + if (*next == '\0') + break; + + if (*next == ',') { + next += 1; + continue; + } + + if (*next == '-') { + next += 1; /* start range */ + } else if (*next == '.') { + next += 1; + if (*next == '.') + next += 1; /* start range */ + else + goto error; + } + + end = strtoul(next, &next, 10); + if (end <= start) + goto error; + + while (++start <= end) { + if (start >= CPU_SUBSET_MAXCPUS) + goto error; + CPU_SET_S(start, cpu_subset_size, cpu_subset); + } + + if (*next == ',') + next += 1; + else if (*next != '\0') + goto error; + } + + return; + +error: + fprintf(stderr, "\"--cpu %s\" malformed\n", optarg); + help(); + exit(-1); +} + + +void cmdline(int argc, char **argv) +{ + int opt; + int option_index = 0; + static struct option long_options[] = { + {"add", required_argument, 0, 'a'}, + {"cpu", required_argument, 0, 'c'}, + {"Dump", no_argument, 0, 'D'}, + {"debug", no_argument, 0, 'd'}, /* internal, not documented */ + {"enable", required_argument, 0, 'e'}, + {"interval", required_argument, 0, 'i'}, + {"num_iterations", required_argument, 0, 'n'}, + {"help", no_argument, 0, 'h'}, + {"hide", required_argument, 0, 'H'}, // meh, -h taken by --help + {"Joules", no_argument, 0, 'J'}, + {"list", no_argument, 0, 'l'}, + {"out", required_argument, 0, 'o'}, + {"quiet", no_argument, 0, 'q'}, + {"show", required_argument, 0, 's'}, + {"Summary", no_argument, 0, 'S'}, + {"TCC", required_argument, 0, 'T'}, + {"version", no_argument, 0, 'v' }, + {0, 0, 0, 0 } + }; + + progname = argv[0]; + + while ((opt = getopt_long_only(argc, argv, "+C:c:Dde:hi:Jn:o:qST:v", + long_options, &option_index)) != -1) { + switch (opt) { + case 'a': + parse_add_command(optarg); + break; + case 'c': + parse_cpu_command(optarg); + break; + case 'D': + dump_only++; + break; + case 'e': + /* --enable specified counter */ + bic_enabled = bic_enabled | bic_lookup(optarg, SHOW_LIST); + break; + case 'd': + debug++; + ENABLE_BIC(BIC_DISABLED_BY_DEFAULT); + break; + case 'H': + /* + * --hide: do not show those specified + * multiple invocations simply clear more bits in enabled mask + */ + bic_enabled &= ~bic_lookup(optarg, HIDE_LIST); + break; + case 'h': + default: + help(); + exit(1); + case 'i': + { + double interval = strtod(optarg, NULL); + + if (interval < 0.001) { + fprintf(outf, "interval %f seconds is too small\n", + interval); + exit(2); + } + + interval_tv.tv_sec = interval_ts.tv_sec = interval; + interval_tv.tv_usec = (interval - interval_tv.tv_sec) * 1000000; + interval_ts.tv_nsec = (interval - interval_ts.tv_sec) * 1000000000; + } + break; + case 'J': + rapl_joules++; + break; + case 'l': + ENABLE_BIC(BIC_DISABLED_BY_DEFAULT); + list_header_only++; + quiet++; + break; + case 'o': + outf = fopen_or_die(optarg, "w"); + break; + case 'q': + quiet = 1; + break; + case 'n': + num_iterations = strtod(optarg, NULL); + + if (num_iterations <= 0) { + fprintf(outf, "iterations %d should be positive number\n", + num_iterations); + exit(2); + } + break; + case 's': + /* + * --show: show only those specified + * The 1st invocation will clear and replace the enabled mask + * subsequent invocations can add to it. + */ + if (shown == 0) + bic_enabled = bic_lookup(optarg, SHOW_LIST); + else + bic_enabled |= bic_lookup(optarg, SHOW_LIST); + shown = 1; + break; + case 'S': + summary_only++; + break; + case 'T': + tcc_activation_temp_override = atoi(optarg); + break; + case 'v': + print_version(); + exit(0); + break; + } + } +} + +int main(int argc, char **argv) +{ + outf = stderr; + cmdline(argc, argv); + + if (!quiet) + print_version(); + + probe_sysfs(); + + turbostat_init(); + + /* dump counters and exit */ + if (dump_only) + return get_and_dump_counters(); + + /* list header and exit */ + if (list_header_only) { + print_header(","); + flush_output_stdout(); + return 0; + } + + msr_sum_record(); + /* + * if any params left, it must be a command to fork + */ + if (argc - optind) + return fork_it(argv + optind); + else + turbostat_loop(); + + return 0; +} diff --git a/tools/power/x86/x86_energy_perf_policy/Makefile b/tools/power/x86/x86_energy_perf_policy/Makefile new file mode 100644 index 000000000..666b325a6 --- /dev/null +++ b/tools/power/x86/x86_energy_perf_policy/Makefile @@ -0,0 +1,29 @@ +# SPDX-License-Identifier: GPL-2.0 +CC = $(CROSS_COMPILE)gcc +BUILD_OUTPUT := $(CURDIR) +PREFIX := /usr +DESTDIR := + +ifeq ("$(origin O)", "command line") + BUILD_OUTPUT := $(O) +endif + +x86_energy_perf_policy : x86_energy_perf_policy.c +override CFLAGS += -O2 -Wall -I../../../include +override CFLAGS += -DMSRHEADER='"../../../../arch/x86/include/asm/msr-index.h"' +override CFLAGS += -D_FORTIFY_SOURCE=2 + +%: %.c + @mkdir -p $(BUILD_OUTPUT) + $(CC) $(CFLAGS) $< -o $(BUILD_OUTPUT)/$@ $(LDFLAGS) + +.PHONY : clean +clean : + @rm -f $(BUILD_OUTPUT)/x86_energy_perf_policy + +install : x86_energy_perf_policy + install -d $(DESTDIR)$(PREFIX)/bin + install $(BUILD_OUTPUT)/x86_energy_perf_policy $(DESTDIR)$(PREFIX)/bin/x86_energy_perf_policy + install -d $(DESTDIR)$(PREFIX)/share/man/man8 + install -m 644 x86_energy_perf_policy.8 $(DESTDIR)$(PREFIX)/share/man/man8 + diff --git a/tools/power/x86/x86_energy_perf_policy/x86_energy_perf_policy.8 b/tools/power/x86/x86_energy_perf_policy/x86_energy_perf_policy.8 new file mode 100644 index 000000000..78c636189 --- /dev/null +++ b/tools/power/x86/x86_energy_perf_policy/x86_energy_perf_policy.8 @@ -0,0 +1,213 @@ +.\" This page Copyright (C) 2010 - 2015 Len Brown <len.brown@intel.com> +.\" Distributed under the GPL, Copyleft 1994. +.TH X86_ENERGY_PERF_POLICY 8 +.SH NAME +x86_energy_perf_policy \- Manage Energy vs. Performance Policy via x86 Model Specific Registers +.SH SYNOPSIS +.B x86_energy_perf_policy +.RB "[ options ] [ scope ] [field \ value]" +.br +.RB "scope: \-\-cpu\ cpu-list | \-\-pkg\ pkg-list" +.br +.RB "cpu-list, pkg-list: # | #,# | #-# | all" +.br +.RB "field: \-\-all | \-\-epb | \-\-hwp-epp | \-\-hwp-min | \-\-hwp-max | \-\-hwp-desired" +.br +.RB "other: (\-\-force | \-\-hwp-enable | \-\-turbo-enable) value)" +.br +.RB "value: # | default | performance | balance-performance | balance-power | power" +.SH DESCRIPTION +\fBx86_energy_perf_policy\fP +displays and updates energy-performance policy settings specific to +Intel Architecture Processors. Settings are accessed via Model Specific Register (MSR) +updates, no matter if the Linux cpufreq sub-system is enabled or not. + +Policy in MSR_IA32_ENERGY_PERF_BIAS (EPB) +may affect a wide range of hardware decisions, +such as how aggressively the hardware enters and exits CPU idle states (C-states) +and Processor Performance States (P-states). +This policy hint does not replace explicit OS C-state and P-state selection. +Rather, it tells the hardware how aggressively to implement those selections. +Further, it allows the OS to influence energy/performance trade-offs where there +is no software interface, such as in the opportunistic "turbo-mode" P-state range. +Note that MSR_IA32_ENERGY_PERF_BIAS is defined per CPU, +but some implementations +share a single MSR among all CPUs in each processor package. +On those systems, a write to EPB on one processor will +be visible, and will have an effect, on all CPUs +in the same processor package. + +Hardware P-States (HWP) are effectively an expansion of hardware +P-state control from the opportunistic turbo-mode P-state range +to include the entire range of available P-states. +On Broadwell Xeon, the initial HWP implementation, EPB influenced HWP. +That influence was removed in subsequent generations, +where it was moved to the +Energy_Performance_Preference (EPP) field in +a pair of dedicated MSRs -- MSR_IA32_HWP_REQUEST and MSR_IA32_HWP_REQUEST_PKG. + +EPP is the most commonly managed knob in HWP mode, +but MSR_IA32_HWP_REQUEST also allows the user to specify +minimum-frequency for Quality-of-Service, +and maximum-frequency for power-capping. +MSR_IA32_HWP_REQUEST is defined per-CPU. + +MSR_IA32_HWP_REQUEST_PKG has the same capability as MSR_IA32_HWP_REQUEST, +but it can simultaneously set the default policy for all CPUs within a package. +A bit in per-CPU MSR_IA32_HWP_REQUEST indicates whether it is +over-ruled-by or exempt-from MSR_IA32_HWP_REQUEST_PKG. + +MSR_HWP_CAPABILITIES shows the default values for the fields +in MSR_IA32_HWP_REQUEST. It is displayed when no values +are being written. + +.SS SCOPE OPTIONS +.PP +\fB-c, --cpu\fP Operate on the MSR_IA32_HWP_REQUEST for each CPU in a CPU-list. +The CPU-list may be comma-separated CPU numbers, with dash for range +or the string "all". Eg. '--cpu 1,4,6-8' or '--cpu all'. +When --cpu is used, \fB--hwp-use-pkg\fP is available, which specifies whether the per-cpu +MSR_IA32_HWP_REQUEST should be over-ruled by MSR_IA32_HWP_REQUEST_PKG (1), +or exempt from MSR_IA32_HWP_REQUEST_PKG (0). + +\fB-p, --pkg\fP Operate on the MSR_IA32_HWP_REQUEST_PKG for each package in the package-list. +The list is a string of individual package numbers separated +by commas, and or ranges of package numbers separated by a dash, +or the string "all". +For example '--pkg 1,3' or '--pkg all' + +.SS VALUE OPTIONS +.PP +.I normal | default +Set a policy with a normal balance between performance and energy efficiency. +The processor will tolerate minor performance compromise +for potentially significant energy savings. +This is a reasonable default for most desktops and servers. +"default" is a synonym for "normal". +.PP +.I performance +Set a policy for maximum performance, +accepting no performance sacrifice for the benefit of energy efficiency. +.PP +.I balance-performance +Set a policy with a high priority on performance, +but allowing some performance loss to benefit energy efficiency. +.PP +.I balance-power +Set a policy where the performance and power are balanced. +This is the default. +.PP +.I power +Set a policy where the processor can accept +a measurable performance impact to maximize energy efficiency. + +.PP +The following table shows the mapping from the value strings above to actual MSR values. +This mapping is defined in the Linux-kernel header, msr-index.h. + +.nf +VALUE STRING EPB EPP +performance 0 0 +balance-performance 4 128 +normal, default 6 128 +balance-power 8 192 +power 15 255 +.fi +.PP +For MSR_IA32_HWP_REQUEST performance fields +(--hwp-min, --hwp-max, --hwp-desired), the value option +is in units of 100 MHz, Eg. 12 signifies 1200 MHz. + +.SS FIELD OPTIONS +\fB-a, --all value-string\fP Sets all EPB and EPP and HWP limit fields to the value associated with +the value-string. In addition, enables turbo-mode and HWP-mode, if they were previous disabled. +Thus "--all normal" will set a system without cpufreq into a well known configuration. +.PP +\fB-B, --epb\fP set EPB per-core or per-package. +See value strings in the table above. +.PP +\fB-d, --debug\fP debug increases verbosity. By default +x86_energy_perf_policy is silent for updates, +and verbose for read-only mode. +.PP +\fB-P, --hwp-epp\fP set HWP.EPP per-core or per-package. +See value strings in the table above. +.PP +\fB-m, --hwp-min\fP request HWP to not go below the specified core/bus ratio. +The "default" is the value found in IA32_HWP_CAPABILITIES.min. +.PP +\fB-M, --hwp-max\fP request HWP not exceed a the specified core/bus ratio. +The "default" is the value found in IA32_HWP_CAPABILITIES.max. +.PP +\fB-D, --hwp-desired\fP request HWP 'desired' frequency. +The "normal" setting is 0, which +corresponds to 'full autonomous' HWP control. +Non-zero performance values request a specific performance +level on this processor, specified in multiples of 100 MHz. +.PP +\fB-w, --hwp-window\fP specify integer number of microsec +in the sliding window that HWP uses to maintain average frequency. +This parameter is meaningful only when the "desired" field above is non-zero. +Default is 0, allowing the HW to choose. +.SH OTHER OPTIONS +.PP +\fB-f, --force\fP writes the specified values without bounds checking. +.PP +\fB-U, --hwp-use-pkg\fP (0 | 1), when used in conjunction with --cpu, +indicates whether the per-CPU MSR_IA32_HWP_REQUEST should be overruled (1) +or exempt (0) from per-Package MSR_IA32_HWP_REQUEST_PKG settings. +The default is exempt. +.PP +\fB-H, --hwp-enable\fP enable HardWare-P-state (HWP) mode. Once enabled, system RESET is required to disable HWP mode. +.PP +\fB-t, --turbo-enable\fP enable (1) or disable (0) turbo mode. +.PP +\fB-v, --version\fP print version and exit. +.PP +If no request to change policy is made, +the default behavior is to read +and display the current system state, +including the default capabilities. +.SH WARNING +.PP +This utility writes directly to Model Specific Registers. +There is no locking or coordination should this utility +be used to modify HWP limit fields at the same time that +intel_pstate's sysfs attributes access the same MSRs. +.PP +Note that --hwp-desired and --hwp-window are considered experimental. +Future versions of Linux reserve the right to access these +fields internally -- potentially conflicting with user-space access. +.SH EXAMPLE +.nf +# sudo x86_energy_perf_policy +cpu0: EPB 6 +cpu0: HWP_REQ: min 6 max 35 des 0 epp 128 window 0x0 (0*10^0us) use_pkg 0 +cpu0: HWP_CAP: low 1 eff 8 guar 27 high 35 +cpu1: EPB 6 +cpu1: HWP_REQ: min 6 max 35 des 0 epp 128 window 0x0 (0*10^0us) use_pkg 0 +cpu1: HWP_CAP: low 1 eff 8 guar 27 high 35 +cpu2: EPB 6 +cpu2: HWP_REQ: min 6 max 35 des 0 epp 128 window 0x0 (0*10^0us) use_pkg 0 +cpu2: HWP_CAP: low 1 eff 8 guar 27 high 35 +cpu3: EPB 6 +cpu3: HWP_REQ: min 6 max 35 des 0 epp 128 window 0x0 (0*10^0us) use_pkg 0 +cpu3: HWP_CAP: low 1 eff 8 guar 27 high 35 +.fi +.SH NOTES +.B "x86_energy_perf_policy" +runs only as root. +.SH FILES +.ta +.nf +/dev/cpu/*/msr +.fi +.SH "SEE ALSO" +.nf +msr(4) +Intel(R) 64 and IA-32 Architectures Software Developer's Manual +.fi +.PP +.SH AUTHORS +.nf +Len Brown diff --git a/tools/power/x86/x86_energy_perf_policy/x86_energy_perf_policy.c b/tools/power/x86/x86_energy_perf_policy/x86_energy_perf_policy.c new file mode 100644 index 000000000..ff6c6661f --- /dev/null +++ b/tools/power/x86/x86_energy_perf_policy/x86_energy_perf_policy.c @@ -0,0 +1,1470 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * x86_energy_perf_policy -- set the energy versus performance + * policy preference bias on recent X86 processors. + */ +/* + * Copyright (c) 2010 - 2017 Intel Corporation. + * Len Brown <len.brown@intel.com> + */ + +#define _GNU_SOURCE +#include MSRHEADER +#include <stdio.h> +#include <unistd.h> +#include <sys/types.h> +#include <sched.h> +#include <sys/stat.h> +#include <sys/resource.h> +#include <getopt.h> +#include <err.h> +#include <fcntl.h> +#include <signal.h> +#include <sys/time.h> +#include <limits.h> +#include <stdlib.h> +#include <string.h> +#include <cpuid.h> +#include <errno.h> + +#define OPTARG_NORMAL (INT_MAX - 1) +#define OPTARG_POWER (INT_MAX - 2) +#define OPTARG_BALANCE_POWER (INT_MAX - 3) +#define OPTARG_BALANCE_PERFORMANCE (INT_MAX - 4) +#define OPTARG_PERFORMANCE (INT_MAX - 5) + +struct msr_hwp_cap { + unsigned char highest; + unsigned char guaranteed; + unsigned char efficient; + unsigned char lowest; +}; + +struct msr_hwp_request { + unsigned char hwp_min; + unsigned char hwp_max; + unsigned char hwp_desired; + unsigned char hwp_epp; + unsigned int hwp_window; + unsigned char hwp_use_pkg; +} req_update; + +unsigned int debug; +unsigned int verbose; +unsigned int force; +char *progname; +int base_cpu; +unsigned char update_epb; +unsigned long long new_epb; +unsigned char turbo_is_enabled; +unsigned char update_turbo; +unsigned char turbo_update_value; +unsigned char update_hwp_epp; +unsigned char update_hwp_min; +unsigned char update_hwp_max; +unsigned char update_hwp_desired; +unsigned char update_hwp_window; +unsigned char update_hwp_use_pkg; +unsigned char update_hwp_enable; +#define hwp_update_enabled() (update_hwp_enable | update_hwp_epp | update_hwp_max | update_hwp_min | update_hwp_desired | update_hwp_window | update_hwp_use_pkg) +int max_cpu_num; +int max_pkg_num; +#define MAX_PACKAGES 64 +unsigned int first_cpu_in_pkg[MAX_PACKAGES]; +unsigned long long pkg_present_set; +unsigned long long pkg_selected_set; +cpu_set_t *cpu_present_set; +cpu_set_t *cpu_selected_set; +int genuine_intel; + +size_t cpu_setsize; + +char *proc_stat = "/proc/stat"; + +unsigned int has_epb; /* MSR_IA32_ENERGY_PERF_BIAS */ +unsigned int has_hwp; /* IA32_PM_ENABLE, IA32_HWP_CAPABILITIES */ + /* IA32_HWP_REQUEST, IA32_HWP_STATUS */ +unsigned int has_hwp_notify; /* IA32_HWP_INTERRUPT */ +unsigned int has_hwp_activity_window; /* IA32_HWP_REQUEST[bits 41:32] */ +unsigned int has_hwp_epp; /* IA32_HWP_REQUEST[bits 31:24] */ +unsigned int has_hwp_request_pkg; /* IA32_HWP_REQUEST_PKG */ + +unsigned int bdx_highest_ratio; + +/* + * maintain compatibility with original implementation, but don't document it: + */ +void usage(void) +{ + fprintf(stderr, "%s [options] [scope][field value]\n", progname); + fprintf(stderr, "scope: --cpu cpu-list [--hwp-use-pkg #] | --pkg pkg-list\n"); + fprintf(stderr, "field: --all | --epb | --hwp-epp | --hwp-min | --hwp-max | --hwp-desired\n"); + fprintf(stderr, "other: --hwp-enable | --turbo-enable (0 | 1) | --help | --force\n"); + fprintf(stderr, + "value: ( # | \"normal\" | \"performance\" | \"balance-performance\" | \"balance-power\"| \"power\")\n"); + fprintf(stderr, "--hwp-window usec\n"); + + fprintf(stderr, "Specify only Energy Performance BIAS (legacy usage):\n"); + fprintf(stderr, "%s: [-c cpu] [-v] (-r | policy-value )\n", progname); + + exit(1); +} + +/* + * If bdx_highest_ratio is set, + * then we must translate between MSR format and simple ratio + * used on the cmdline. + */ +int ratio_2_msr_perf(int ratio) +{ + int msr_perf; + + if (!bdx_highest_ratio) + return ratio; + + msr_perf = ratio * 255 / bdx_highest_ratio; + + if (debug) + fprintf(stderr, "%d = ratio_to_msr_perf(%d)\n", msr_perf, ratio); + + return msr_perf; +} +int msr_perf_2_ratio(int msr_perf) +{ + int ratio; + double d; + + if (!bdx_highest_ratio) + return msr_perf; + + d = (double)msr_perf * (double) bdx_highest_ratio / 255.0; + d = d + 0.5; /* round */ + ratio = (int)d; + + if (debug) + fprintf(stderr, "%d = msr_perf_ratio(%d) {%f}\n", ratio, msr_perf, d); + + return ratio; +} +int parse_cmdline_epb(int i) +{ + if (!has_epb) + errx(1, "EPB not enabled on this platform"); + + update_epb = 1; + + switch (i) { + case OPTARG_POWER: + return ENERGY_PERF_BIAS_POWERSAVE; + case OPTARG_BALANCE_POWER: + return ENERGY_PERF_BIAS_BALANCE_POWERSAVE; + case OPTARG_NORMAL: + return ENERGY_PERF_BIAS_NORMAL; + case OPTARG_BALANCE_PERFORMANCE: + return ENERGY_PERF_BIAS_BALANCE_PERFORMANCE; + case OPTARG_PERFORMANCE: + return ENERGY_PERF_BIAS_PERFORMANCE; + } + if (i < 0 || i > ENERGY_PERF_BIAS_POWERSAVE) + errx(1, "--epb must be from 0 to 15"); + return i; +} + +#define HWP_CAP_LOWEST 0 +#define HWP_CAP_HIGHEST 255 + +/* + * "performance" changes hwp_min to cap.highest + * All others leave it at cap.lowest + */ +int parse_cmdline_hwp_min(int i) +{ + update_hwp_min = 1; + + switch (i) { + case OPTARG_POWER: + case OPTARG_BALANCE_POWER: + case OPTARG_NORMAL: + case OPTARG_BALANCE_PERFORMANCE: + return HWP_CAP_LOWEST; + case OPTARG_PERFORMANCE: + return HWP_CAP_HIGHEST; + } + return i; +} +/* + * "power" changes hwp_max to cap.lowest + * All others leave it at cap.highest + */ +int parse_cmdline_hwp_max(int i) +{ + update_hwp_max = 1; + + switch (i) { + case OPTARG_POWER: + return HWP_CAP_LOWEST; + case OPTARG_NORMAL: + case OPTARG_BALANCE_POWER: + case OPTARG_BALANCE_PERFORMANCE: + case OPTARG_PERFORMANCE: + return HWP_CAP_HIGHEST; + } + return i; +} +/* + * for --hwp-des, all strings leave it in autonomous mode + * If you want to change it, you need to explicitly pick a value + */ +int parse_cmdline_hwp_desired(int i) +{ + update_hwp_desired = 1; + + switch (i) { + case OPTARG_POWER: + case OPTARG_BALANCE_POWER: + case OPTARG_BALANCE_PERFORMANCE: + case OPTARG_NORMAL: + case OPTARG_PERFORMANCE: + return 0; /* autonomous */ + } + return i; +} + +int parse_cmdline_hwp_window(int i) +{ + unsigned int exponent; + + update_hwp_window = 1; + + switch (i) { + case OPTARG_POWER: + case OPTARG_BALANCE_POWER: + case OPTARG_NORMAL: + case OPTARG_BALANCE_PERFORMANCE: + case OPTARG_PERFORMANCE: + return 0; + } + if (i < 0 || i > 1270000000) { + fprintf(stderr, "--hwp-window: 0 for auto; 1 - 1270000000 usec for window duration\n"); + usage(); + } + for (exponent = 0; ; ++exponent) { + if (debug) + printf("%d 10^%d\n", i, exponent); + + if (i <= 127) + break; + + i = i / 10; + } + if (debug) + fprintf(stderr, "%d*10^%d: 0x%x\n", i, exponent, (exponent << 7) | i); + + return (exponent << 7) | i; +} +int parse_cmdline_hwp_epp(int i) +{ + update_hwp_epp = 1; + + switch (i) { + case OPTARG_POWER: + return HWP_EPP_POWERSAVE; + case OPTARG_BALANCE_POWER: + return HWP_EPP_BALANCE_POWERSAVE; + case OPTARG_NORMAL: + case OPTARG_BALANCE_PERFORMANCE: + return HWP_EPP_BALANCE_PERFORMANCE; + case OPTARG_PERFORMANCE: + return HWP_EPP_PERFORMANCE; + } + if (i < 0 || i > 0xff) { + fprintf(stderr, "--hwp-epp must be from 0 to 0xff\n"); + usage(); + } + return i; +} +int parse_cmdline_turbo(int i) +{ + update_turbo = 1; + + switch (i) { + case OPTARG_POWER: + return 0; + case OPTARG_NORMAL: + case OPTARG_BALANCE_POWER: + case OPTARG_BALANCE_PERFORMANCE: + case OPTARG_PERFORMANCE: + return 1; + } + if (i < 0 || i > 1) { + fprintf(stderr, "--turbo-enable: 1 to enable, 0 to disable\n"); + usage(); + } + return i; +} + +int parse_optarg_string(char *s) +{ + int i; + char *endptr; + + if (!strncmp(s, "default", 7)) + return OPTARG_NORMAL; + + if (!strncmp(s, "normal", 6)) + return OPTARG_NORMAL; + + if (!strncmp(s, "power", 9)) + return OPTARG_POWER; + + if (!strncmp(s, "balance-power", 17)) + return OPTARG_BALANCE_POWER; + + if (!strncmp(s, "balance-performance", 19)) + return OPTARG_BALANCE_PERFORMANCE; + + if (!strncmp(s, "performance", 11)) + return OPTARG_PERFORMANCE; + + i = strtol(s, &endptr, 0); + if (s == endptr) { + fprintf(stderr, "no digits in \"%s\"\n", s); + usage(); + } + if (i == LONG_MIN || i == LONG_MAX) + errx(-1, "%s", s); + + if (i > 0xFF) + errx(-1, "%d (0x%x) must be < 256", i, i); + + if (i < 0) + errx(-1, "%d (0x%x) must be >= 0", i, i); + return i; +} + +void parse_cmdline_all(char *s) +{ + force++; + update_hwp_enable = 1; + req_update.hwp_min = parse_cmdline_hwp_min(parse_optarg_string(s)); + req_update.hwp_max = parse_cmdline_hwp_max(parse_optarg_string(s)); + req_update.hwp_epp = parse_cmdline_hwp_epp(parse_optarg_string(s)); + if (has_epb) + new_epb = parse_cmdline_epb(parse_optarg_string(s)); + turbo_update_value = parse_cmdline_turbo(parse_optarg_string(s)); + req_update.hwp_desired = parse_cmdline_hwp_desired(parse_optarg_string(s)); + req_update.hwp_window = parse_cmdline_hwp_window(parse_optarg_string(s)); +} + +void validate_cpu_selected_set(void) +{ + int cpu; + + if (CPU_COUNT_S(cpu_setsize, cpu_selected_set) == 0) + errx(0, "no CPUs requested"); + + for (cpu = 0; cpu <= max_cpu_num; ++cpu) { + if (CPU_ISSET_S(cpu, cpu_setsize, cpu_selected_set)) + if (!CPU_ISSET_S(cpu, cpu_setsize, cpu_present_set)) + errx(1, "Requested cpu% is not present", cpu); + } +} + +void parse_cmdline_cpu(char *s) +{ + char *startp, *endp; + int cpu = 0; + + if (pkg_selected_set) { + usage(); + errx(1, "--cpu | --pkg"); + } + cpu_selected_set = CPU_ALLOC((max_cpu_num + 1)); + if (cpu_selected_set == NULL) + err(1, "cpu_selected_set"); + CPU_ZERO_S(cpu_setsize, cpu_selected_set); + + for (startp = s; startp && *startp;) { + + if (*startp == ',') { + startp++; + continue; + } + + if (*startp == '-') { + int end_cpu; + + startp++; + end_cpu = strtol(startp, &endp, 10); + if (startp == endp) + continue; + + while (cpu <= end_cpu) { + if (cpu > max_cpu_num) + errx(1, "Requested cpu%d exceeds max cpu%d", cpu, max_cpu_num); + CPU_SET_S(cpu, cpu_setsize, cpu_selected_set); + cpu++; + } + startp = endp; + continue; + } + + if (strncmp(startp, "all", 3) == 0) { + for (cpu = 0; cpu <= max_cpu_num; cpu += 1) { + if (CPU_ISSET_S(cpu, cpu_setsize, cpu_present_set)) + CPU_SET_S(cpu, cpu_setsize, cpu_selected_set); + } + startp += 3; + if (*startp == 0) + break; + } + /* "--cpu even" is not documented */ + if (strncmp(startp, "even", 4) == 0) { + for (cpu = 0; cpu <= max_cpu_num; cpu += 2) { + if (CPU_ISSET_S(cpu, cpu_setsize, cpu_present_set)) + CPU_SET_S(cpu, cpu_setsize, cpu_selected_set); + } + startp += 4; + if (*startp == 0) + break; + } + + /* "--cpu odd" is not documented */ + if (strncmp(startp, "odd", 3) == 0) { + for (cpu = 1; cpu <= max_cpu_num; cpu += 2) { + if (CPU_ISSET_S(cpu, cpu_setsize, cpu_present_set)) + CPU_SET_S(cpu, cpu_setsize, cpu_selected_set); + } + startp += 3; + if (*startp == 0) + break; + } + + cpu = strtol(startp, &endp, 10); + if (startp == endp) + errx(1, "--cpu cpu-set: confused by '%s'", startp); + if (cpu > max_cpu_num) + errx(1, "Requested cpu%d exceeds max cpu%d", cpu, max_cpu_num); + CPU_SET_S(cpu, cpu_setsize, cpu_selected_set); + startp = endp; + } + + validate_cpu_selected_set(); + +} + +void parse_cmdline_pkg(char *s) +{ + char *startp, *endp; + int pkg = 0; + + if (cpu_selected_set) { + usage(); + errx(1, "--pkg | --cpu"); + } + pkg_selected_set = 0; + + for (startp = s; startp && *startp;) { + + if (*startp == ',') { + startp++; + continue; + } + + if (*startp == '-') { + int end_pkg; + + startp++; + end_pkg = strtol(startp, &endp, 10); + if (startp == endp) + continue; + + while (pkg <= end_pkg) { + if (pkg > max_pkg_num) + errx(1, "Requested pkg%d exceeds max pkg%d", pkg, max_pkg_num); + pkg_selected_set |= 1 << pkg; + pkg++; + } + startp = endp; + continue; + } + + if (strncmp(startp, "all", 3) == 0) { + pkg_selected_set = pkg_present_set; + return; + } + + pkg = strtol(startp, &endp, 10); + if (pkg > max_pkg_num) + errx(1, "Requested pkg%d Exceeds max pkg%d", pkg, max_pkg_num); + pkg_selected_set |= 1 << pkg; + startp = endp; + } +} + +void for_packages(unsigned long long pkg_set, int (func)(int)) +{ + int pkg_num; + + for (pkg_num = 0; pkg_num <= max_pkg_num; ++pkg_num) { + if (pkg_set & (1UL << pkg_num)) + func(pkg_num); + } +} + +void print_version(void) +{ + printf("x86_energy_perf_policy 17.05.11 (C) Len Brown <len.brown@intel.com>\n"); +} + +void cmdline(int argc, char **argv) +{ + int opt; + int option_index = 0; + + static struct option long_options[] = { + {"all", required_argument, 0, 'a'}, + {"cpu", required_argument, 0, 'c'}, + {"pkg", required_argument, 0, 'p'}, + {"debug", no_argument, 0, 'd'}, + {"hwp-desired", required_argument, 0, 'D'}, + {"epb", required_argument, 0, 'B'}, + {"force", no_argument, 0, 'f'}, + {"hwp-enable", no_argument, 0, 'e'}, + {"help", no_argument, 0, 'h'}, + {"hwp-epp", required_argument, 0, 'P'}, + {"hwp-min", required_argument, 0, 'm'}, + {"hwp-max", required_argument, 0, 'M'}, + {"read", no_argument, 0, 'r'}, + {"turbo-enable", required_argument, 0, 't'}, + {"hwp-use-pkg", required_argument, 0, 'u'}, + {"version", no_argument, 0, 'v'}, + {"hwp-window", required_argument, 0, 'w'}, + {0, 0, 0, 0 } + }; + + progname = argv[0]; + + while ((opt = getopt_long_only(argc, argv, "+a:c:dD:E:e:f:m:M:rt:u:vw:", + long_options, &option_index)) != -1) { + switch (opt) { + case 'a': + parse_cmdline_all(optarg); + break; + case 'B': + new_epb = parse_cmdline_epb(parse_optarg_string(optarg)); + break; + case 'c': + parse_cmdline_cpu(optarg); + break; + case 'e': + update_hwp_enable = 1; + break; + case 'h': + usage(); + break; + case 'd': + debug++; + verbose++; + break; + case 'f': + force++; + break; + case 'D': + req_update.hwp_desired = parse_cmdline_hwp_desired(parse_optarg_string(optarg)); + break; + case 'm': + req_update.hwp_min = parse_cmdline_hwp_min(parse_optarg_string(optarg)); + break; + case 'M': + req_update.hwp_max = parse_cmdline_hwp_max(parse_optarg_string(optarg)); + break; + case 'p': + parse_cmdline_pkg(optarg); + break; + case 'P': + req_update.hwp_epp = parse_cmdline_hwp_epp(parse_optarg_string(optarg)); + break; + case 'r': + /* v1 used -r to specify read-only mode, now the default */ + break; + case 't': + turbo_update_value = parse_cmdline_turbo(parse_optarg_string(optarg)); + break; + case 'u': + update_hwp_use_pkg++; + if (atoi(optarg) == 0) + req_update.hwp_use_pkg = 0; + else + req_update.hwp_use_pkg = 1; + break; + case 'v': + print_version(); + exit(0); + break; + case 'w': + req_update.hwp_window = parse_cmdline_hwp_window(parse_optarg_string(optarg)); + break; + default: + usage(); + } + } + /* + * v1 allowed "performance"|"normal"|"power" with no policy specifier + * to update BIAS. Continue to support that, even though no longer documented. + */ + if (argc == optind + 1) + new_epb = parse_cmdline_epb(parse_optarg_string(argv[optind])); + + if (argc > optind + 1) { + fprintf(stderr, "stray parameter '%s'\n", argv[optind + 1]); + usage(); + } +} + +/* + * Open a file, and exit on failure + */ +FILE *fopen_or_die(const char *path, const char *mode) +{ + FILE *filep = fopen(path, "r"); + + if (!filep) + err(1, "%s: open failed", path); + return filep; +} + +void err_on_hypervisor(void) +{ + FILE *cpuinfo; + char *flags, *hypervisor; + char *buffer; + + /* On VMs /proc/cpuinfo contains a "flags" entry for hypervisor */ + cpuinfo = fopen_or_die("/proc/cpuinfo", "ro"); + + buffer = malloc(4096); + if (!buffer) { + fclose(cpuinfo); + err(-ENOMEM, "buffer malloc fail"); + } + + if (!fread(buffer, 1024, 1, cpuinfo)) { + fclose(cpuinfo); + free(buffer); + err(1, "Reading /proc/cpuinfo failed"); + } + + flags = strstr(buffer, "flags"); + rewind(cpuinfo); + fseek(cpuinfo, flags - buffer, SEEK_SET); + if (!fgets(buffer, 4096, cpuinfo)) { + fclose(cpuinfo); + free(buffer); + err(1, "Reading /proc/cpuinfo failed"); + } + fclose(cpuinfo); + + hypervisor = strstr(buffer, "hypervisor"); + + free(buffer); + + if (hypervisor) + err(-1, + "not supported on this virtual machine"); +} + +int get_msr(int cpu, int offset, unsigned long long *msr) +{ + int retval; + char pathname[32]; + int fd; + + sprintf(pathname, "/dev/cpu/%d/msr", cpu); + fd = open(pathname, O_RDONLY); + if (fd < 0) + err(-1, "%s open failed, try chown or chmod +r /dev/cpu/*/msr, or run as root", pathname); + + retval = pread(fd, msr, sizeof(*msr), offset); + if (retval != sizeof(*msr)) { + err_on_hypervisor(); + err(-1, "%s offset 0x%llx read failed", pathname, (unsigned long long)offset); + } + + if (debug > 1) + fprintf(stderr, "get_msr(cpu%d, 0x%X, 0x%llX)\n", cpu, offset, *msr); + + close(fd); + return 0; +} + +int put_msr(int cpu, int offset, unsigned long long new_msr) +{ + char pathname[32]; + int retval; + int fd; + + sprintf(pathname, "/dev/cpu/%d/msr", cpu); + fd = open(pathname, O_RDWR); + if (fd < 0) + err(-1, "%s open failed, try chown or chmod +r /dev/cpu/*/msr, or run as root", pathname); + + retval = pwrite(fd, &new_msr, sizeof(new_msr), offset); + if (retval != sizeof(new_msr)) + err(-2, "pwrite(cpu%d, offset 0x%x, 0x%llx) = %d", cpu, offset, new_msr, retval); + + close(fd); + + if (debug > 1) + fprintf(stderr, "put_msr(cpu%d, 0x%X, 0x%llX)\n", cpu, offset, new_msr); + + return 0; +} + +void print_hwp_cap(int cpu, struct msr_hwp_cap *cap, char *str) +{ + if (cpu != -1) + printf("cpu%d: ", cpu); + + printf("HWP_CAP: low %d eff %d guar %d high %d\n", + cap->lowest, cap->efficient, cap->guaranteed, cap->highest); +} +void read_hwp_cap(int cpu, struct msr_hwp_cap *cap, unsigned int msr_offset) +{ + unsigned long long msr; + + get_msr(cpu, msr_offset, &msr); + + cap->highest = msr_perf_2_ratio(HWP_HIGHEST_PERF(msr)); + cap->guaranteed = msr_perf_2_ratio(HWP_GUARANTEED_PERF(msr)); + cap->efficient = msr_perf_2_ratio(HWP_MOSTEFFICIENT_PERF(msr)); + cap->lowest = msr_perf_2_ratio(HWP_LOWEST_PERF(msr)); +} + +void print_hwp_request(int cpu, struct msr_hwp_request *h, char *str) +{ + if (cpu != -1) + printf("cpu%d: ", cpu); + + if (str) + printf("%s", str); + + printf("HWP_REQ: min %d max %d des %d epp %d window 0x%x (%d*10^%dus) use_pkg %d\n", + h->hwp_min, h->hwp_max, h->hwp_desired, h->hwp_epp, + h->hwp_window, h->hwp_window & 0x7F, (h->hwp_window >> 7) & 0x7, h->hwp_use_pkg); +} +void print_hwp_request_pkg(int pkg, struct msr_hwp_request *h, char *str) +{ + printf("pkg%d: ", pkg); + + if (str) + printf("%s", str); + + printf("HWP_REQ_PKG: min %d max %d des %d epp %d window 0x%x (%d*10^%dus)\n", + h->hwp_min, h->hwp_max, h->hwp_desired, h->hwp_epp, + h->hwp_window, h->hwp_window & 0x7F, (h->hwp_window >> 7) & 0x7); +} +void read_hwp_request(int cpu, struct msr_hwp_request *hwp_req, unsigned int msr_offset) +{ + unsigned long long msr; + + get_msr(cpu, msr_offset, &msr); + + hwp_req->hwp_min = msr_perf_2_ratio((((msr) >> 0) & 0xff)); + hwp_req->hwp_max = msr_perf_2_ratio((((msr) >> 8) & 0xff)); + hwp_req->hwp_desired = msr_perf_2_ratio((((msr) >> 16) & 0xff)); + hwp_req->hwp_epp = (((msr) >> 24) & 0xff); + hwp_req->hwp_window = (((msr) >> 32) & 0x3ff); + hwp_req->hwp_use_pkg = (((msr) >> 42) & 0x1); +} + +void write_hwp_request(int cpu, struct msr_hwp_request *hwp_req, unsigned int msr_offset) +{ + unsigned long long msr = 0; + + if (debug > 1) + printf("cpu%d: requesting min %d max %d des %d epp %d window 0x%0x use_pkg %d\n", + cpu, hwp_req->hwp_min, hwp_req->hwp_max, + hwp_req->hwp_desired, hwp_req->hwp_epp, + hwp_req->hwp_window, hwp_req->hwp_use_pkg); + + msr |= HWP_MIN_PERF(ratio_2_msr_perf(hwp_req->hwp_min)); + msr |= HWP_MAX_PERF(ratio_2_msr_perf(hwp_req->hwp_max)); + msr |= HWP_DESIRED_PERF(ratio_2_msr_perf(hwp_req->hwp_desired)); + msr |= HWP_ENERGY_PERF_PREFERENCE(hwp_req->hwp_epp); + msr |= HWP_ACTIVITY_WINDOW(hwp_req->hwp_window); + msr |= HWP_PACKAGE_CONTROL(hwp_req->hwp_use_pkg); + + put_msr(cpu, msr_offset, msr); +} + +int print_cpu_msrs(int cpu) +{ + unsigned long long msr; + struct msr_hwp_request req; + struct msr_hwp_cap cap; + + if (has_epb) { + get_msr(cpu, MSR_IA32_ENERGY_PERF_BIAS, &msr); + + printf("cpu%d: EPB %u\n", cpu, (unsigned int) msr); + } + + if (!has_hwp) + return 0; + + read_hwp_request(cpu, &req, MSR_HWP_REQUEST); + print_hwp_request(cpu, &req, ""); + + read_hwp_cap(cpu, &cap, MSR_HWP_CAPABILITIES); + print_hwp_cap(cpu, &cap, ""); + + return 0; +} + +int print_pkg_msrs(int pkg) +{ + struct msr_hwp_request req; + unsigned long long msr; + + if (!has_hwp) + return 0; + + read_hwp_request(first_cpu_in_pkg[pkg], &req, MSR_HWP_REQUEST_PKG); + print_hwp_request_pkg(pkg, &req, ""); + + if (has_hwp_notify) { + get_msr(first_cpu_in_pkg[pkg], MSR_HWP_INTERRUPT, &msr); + fprintf(stderr, + "pkg%d: MSR_HWP_INTERRUPT: 0x%08llx (Excursion_Min-%sabled, Guaranteed_Perf_Change-%sabled)\n", + pkg, msr, + ((msr) & 0x2) ? "EN" : "Dis", + ((msr) & 0x1) ? "EN" : "Dis"); + } + get_msr(first_cpu_in_pkg[pkg], MSR_HWP_STATUS, &msr); + fprintf(stderr, + "pkg%d: MSR_HWP_STATUS: 0x%08llx (%sExcursion_Min, %sGuaranteed_Perf_Change)\n", + pkg, msr, + ((msr) & 0x4) ? "" : "No-", + ((msr) & 0x1) ? "" : "No-"); + + return 0; +} + +/* + * Assumption: All HWP systems have 100 MHz bus clock + */ +int ratio_2_sysfs_khz(int ratio) +{ + int bclk_khz = 100 * 1000; /* 100,000 KHz = 100 MHz */ + + return ratio * bclk_khz; +} +/* + * If HWP is enabled and cpufreq sysfs attribtes are present, + * then update sysfs, so that it will not become + * stale when we write to MSRs. + * (intel_pstate's max_perf_pct and min_perf_pct will follow cpufreq, + * so we don't have to touch that.) + */ +void update_cpufreq_scaling_freq(int is_max, int cpu, unsigned int ratio) +{ + char pathname[64]; + FILE *fp; + int retval; + int khz; + + sprintf(pathname, "/sys/devices/system/cpu/cpu%d/cpufreq/scaling_%s_freq", + cpu, is_max ? "max" : "min"); + + fp = fopen(pathname, "w"); + if (!fp) { + if (debug) + perror(pathname); + return; + } + + khz = ratio_2_sysfs_khz(ratio); + retval = fprintf(fp, "%d", khz); + if (retval < 0) + if (debug) + perror("fprintf"); + if (debug) + printf("echo %d > %s\n", khz, pathname); + + fclose(fp); +} + +/* + * We update all sysfs before updating any MSRs because of + * bugs in cpufreq/intel_pstate where the sysfs writes + * for a CPU may change the min/max values on other CPUS. + */ + +int update_sysfs(int cpu) +{ + if (!has_hwp) + return 0; + + if (!hwp_update_enabled()) + return 0; + + if (access("/sys/devices/system/cpu/cpu0/cpufreq", F_OK)) + return 0; + + if (update_hwp_min) + update_cpufreq_scaling_freq(0, cpu, req_update.hwp_min); + + if (update_hwp_max) + update_cpufreq_scaling_freq(1, cpu, req_update.hwp_max); + + return 0; +} + +int verify_hwp_req_self_consistency(int cpu, struct msr_hwp_request *req) +{ + /* fail if min > max requested */ + if (req->hwp_min > req->hwp_max) { + errx(1, "cpu%d: requested hwp-min %d > hwp_max %d", + cpu, req->hwp_min, req->hwp_max); + } + + /* fail if desired > max requestd */ + if (req->hwp_desired && (req->hwp_desired > req->hwp_max)) { + errx(1, "cpu%d: requested hwp-desired %d > hwp_max %d", + cpu, req->hwp_desired, req->hwp_max); + } + /* fail if desired < min requestd */ + if (req->hwp_desired && (req->hwp_desired < req->hwp_min)) { + errx(1, "cpu%d: requested hwp-desired %d < requested hwp_min %d", + cpu, req->hwp_desired, req->hwp_min); + } + + return 0; +} + +int check_hwp_request_v_hwp_capabilities(int cpu, struct msr_hwp_request *req, struct msr_hwp_cap *cap) +{ + if (update_hwp_max) { + if (req->hwp_max > cap->highest) + errx(1, "cpu%d: requested max %d > capabilities highest %d, use --force?", + cpu, req->hwp_max, cap->highest); + if (req->hwp_max < cap->lowest) + errx(1, "cpu%d: requested max %d < capabilities lowest %d, use --force?", + cpu, req->hwp_max, cap->lowest); + } + + if (update_hwp_min) { + if (req->hwp_min > cap->highest) + errx(1, "cpu%d: requested min %d > capabilities highest %d, use --force?", + cpu, req->hwp_min, cap->highest); + if (req->hwp_min < cap->lowest) + errx(1, "cpu%d: requested min %d < capabilities lowest %d, use --force?", + cpu, req->hwp_min, cap->lowest); + } + + if (update_hwp_min && update_hwp_max && (req->hwp_min > req->hwp_max)) + errx(1, "cpu%d: requested min %d > requested max %d", + cpu, req->hwp_min, req->hwp_max); + + if (update_hwp_desired && req->hwp_desired) { + if (req->hwp_desired > req->hwp_max) + errx(1, "cpu%d: requested desired %d > requested max %d, use --force?", + cpu, req->hwp_desired, req->hwp_max); + if (req->hwp_desired < req->hwp_min) + errx(1, "cpu%d: requested desired %d < requested min %d, use --force?", + cpu, req->hwp_desired, req->hwp_min); + if (req->hwp_desired < cap->lowest) + errx(1, "cpu%d: requested desired %d < capabilities lowest %d, use --force?", + cpu, req->hwp_desired, cap->lowest); + if (req->hwp_desired > cap->highest) + errx(1, "cpu%d: requested desired %d > capabilities highest %d, use --force?", + cpu, req->hwp_desired, cap->highest); + } + + return 0; +} + +int update_hwp_request(int cpu) +{ + struct msr_hwp_request req; + struct msr_hwp_cap cap; + + int msr_offset = MSR_HWP_REQUEST; + + read_hwp_request(cpu, &req, msr_offset); + if (debug) + print_hwp_request(cpu, &req, "old: "); + + if (update_hwp_min) + req.hwp_min = req_update.hwp_min; + + if (update_hwp_max) + req.hwp_max = req_update.hwp_max; + + if (update_hwp_desired) + req.hwp_desired = req_update.hwp_desired; + + if (update_hwp_window) + req.hwp_window = req_update.hwp_window; + + if (update_hwp_epp) + req.hwp_epp = req_update.hwp_epp; + + req.hwp_use_pkg = req_update.hwp_use_pkg; + + read_hwp_cap(cpu, &cap, MSR_HWP_CAPABILITIES); + if (debug) + print_hwp_cap(cpu, &cap, ""); + + if (!force) + check_hwp_request_v_hwp_capabilities(cpu, &req, &cap); + + verify_hwp_req_self_consistency(cpu, &req); + + write_hwp_request(cpu, &req, msr_offset); + + if (debug) { + read_hwp_request(cpu, &req, msr_offset); + print_hwp_request(cpu, &req, "new: "); + } + return 0; +} +int update_hwp_request_pkg(int pkg) +{ + struct msr_hwp_request req; + struct msr_hwp_cap cap; + int cpu = first_cpu_in_pkg[pkg]; + + int msr_offset = MSR_HWP_REQUEST_PKG; + + read_hwp_request(cpu, &req, msr_offset); + if (debug) + print_hwp_request_pkg(pkg, &req, "old: "); + + if (update_hwp_min) + req.hwp_min = req_update.hwp_min; + + if (update_hwp_max) + req.hwp_max = req_update.hwp_max; + + if (update_hwp_desired) + req.hwp_desired = req_update.hwp_desired; + + if (update_hwp_window) + req.hwp_window = req_update.hwp_window; + + if (update_hwp_epp) + req.hwp_epp = req_update.hwp_epp; + + read_hwp_cap(cpu, &cap, MSR_HWP_CAPABILITIES); + if (debug) + print_hwp_cap(cpu, &cap, ""); + + if (!force) + check_hwp_request_v_hwp_capabilities(cpu, &req, &cap); + + verify_hwp_req_self_consistency(cpu, &req); + + write_hwp_request(cpu, &req, msr_offset); + + if (debug) { + read_hwp_request(cpu, &req, msr_offset); + print_hwp_request_pkg(pkg, &req, "new: "); + } + return 0; +} + +int enable_hwp_on_cpu(int cpu) +{ + unsigned long long msr; + + get_msr(cpu, MSR_PM_ENABLE, &msr); + put_msr(cpu, MSR_PM_ENABLE, 1); + + if (verbose) + printf("cpu%d: MSR_PM_ENABLE old: %d new: %d\n", cpu, (unsigned int) msr, 1); + + return 0; +} + +int update_cpu_msrs(int cpu) +{ + unsigned long long msr; + + + if (update_epb) { + get_msr(cpu, MSR_IA32_ENERGY_PERF_BIAS, &msr); + put_msr(cpu, MSR_IA32_ENERGY_PERF_BIAS, new_epb); + + if (verbose) + printf("cpu%d: ENERGY_PERF_BIAS old: %d new: %d\n", + cpu, (unsigned int) msr, (unsigned int) new_epb); + } + + if (update_turbo) { + int turbo_is_present_and_disabled; + + get_msr(cpu, MSR_IA32_MISC_ENABLE, &msr); + + turbo_is_present_and_disabled = ((msr & MSR_IA32_MISC_ENABLE_TURBO_DISABLE) != 0); + + if (turbo_update_value == 1) { + if (turbo_is_present_and_disabled) { + msr &= ~MSR_IA32_MISC_ENABLE_TURBO_DISABLE; + put_msr(cpu, MSR_IA32_MISC_ENABLE, msr); + if (verbose) + printf("cpu%d: turbo ENABLE\n", cpu); + } + } else { + /* + * if "turbo_is_enabled" were known to be describe this cpu + * then we could use it here to skip redundant disable requests. + * but cpu may be in a different package, so we always write. + */ + msr |= MSR_IA32_MISC_ENABLE_TURBO_DISABLE; + put_msr(cpu, MSR_IA32_MISC_ENABLE, msr); + if (verbose) + printf("cpu%d: turbo DISABLE\n", cpu); + } + } + + if (!has_hwp) + return 0; + + if (!hwp_update_enabled()) + return 0; + + update_hwp_request(cpu); + return 0; +} + +unsigned int get_pkg_num(int cpu) +{ + FILE *fp; + char pathname[128]; + unsigned int pkg; + int retval; + + sprintf(pathname, "/sys/devices/system/cpu/cpu%d/topology/physical_package_id", cpu); + + fp = fopen_or_die(pathname, "r"); + retval = fscanf(fp, "%d\n", &pkg); + if (retval != 1) + errx(1, "%s: failed to parse", pathname); + return pkg; +} + +int set_max_cpu_pkg_num(int cpu) +{ + unsigned int pkg; + + if (max_cpu_num < cpu) + max_cpu_num = cpu; + + pkg = get_pkg_num(cpu); + + if (pkg >= MAX_PACKAGES) + errx(1, "cpu%d: %d >= MAX_PACKAGES (%d)", cpu, pkg, MAX_PACKAGES); + + if (pkg > max_pkg_num) + max_pkg_num = pkg; + + if ((pkg_present_set & (1ULL << pkg)) == 0) { + pkg_present_set |= (1ULL << pkg); + first_cpu_in_pkg[pkg] = cpu; + } + + return 0; +} +int mark_cpu_present(int cpu) +{ + CPU_SET_S(cpu, cpu_setsize, cpu_present_set); + return 0; +} + +/* + * run func(cpu) on every cpu in /proc/stat + * return max_cpu number + */ +int for_all_proc_cpus(int (func)(int)) +{ + FILE *fp; + int cpu_num; + int retval; + + fp = fopen_or_die(proc_stat, "r"); + + retval = fscanf(fp, "cpu %*d %*d %*d %*d %*d %*d %*d %*d %*d %*d\n"); + if (retval != 0) + err(1, "%s: failed to parse format", proc_stat); + + while (1) { + retval = fscanf(fp, "cpu%u %*d %*d %*d %*d %*d %*d %*d %*d %*d %*d\n", &cpu_num); + if (retval != 1) + break; + + retval = func(cpu_num); + if (retval) { + fclose(fp); + return retval; + } + } + fclose(fp); + return 0; +} + +void for_all_cpus_in_set(size_t set_size, cpu_set_t *cpu_set, int (func)(int)) +{ + int cpu_num; + + for (cpu_num = 0; cpu_num <= max_cpu_num; ++cpu_num) + if (CPU_ISSET_S(cpu_num, set_size, cpu_set)) + func(cpu_num); +} + +void init_data_structures(void) +{ + for_all_proc_cpus(set_max_cpu_pkg_num); + + cpu_setsize = CPU_ALLOC_SIZE((max_cpu_num + 1)); + + cpu_present_set = CPU_ALLOC((max_cpu_num + 1)); + if (cpu_present_set == NULL) + err(3, "CPU_ALLOC"); + CPU_ZERO_S(cpu_setsize, cpu_present_set); + for_all_proc_cpus(mark_cpu_present); +} + +/* clear has_hwp if it is not enable (or being enabled) */ + +void verify_hwp_is_enabled(void) +{ + unsigned long long msr; + + if (!has_hwp) /* set in early_cpuid() */ + return; + + /* MSR_PM_ENABLE[1] == 1 if HWP is enabled and MSRs visible */ + get_msr(base_cpu, MSR_PM_ENABLE, &msr); + if ((msr & 1) == 0) { + fprintf(stderr, "HWP can be enabled using '--hwp-enable'\n"); + has_hwp = 0; + return; + } +} + +int req_update_bounds_check(void) +{ + if (!hwp_update_enabled()) + return 0; + + /* fail if min > max requested */ + if ((update_hwp_max && update_hwp_min) && + (req_update.hwp_min > req_update.hwp_max)) { + printf("hwp-min %d > hwp_max %d\n", req_update.hwp_min, req_update.hwp_max); + return -EINVAL; + } + + /* fail if desired > max requestd */ + if (req_update.hwp_desired && update_hwp_max && + (req_update.hwp_desired > req_update.hwp_max)) { + printf("hwp-desired cannot be greater than hwp_max\n"); + return -EINVAL; + } + /* fail if desired < min requestd */ + if (req_update.hwp_desired && update_hwp_min && + (req_update.hwp_desired < req_update.hwp_min)) { + printf("hwp-desired cannot be less than hwp_min\n"); + return -EINVAL; + } + + return 0; +} + +void set_base_cpu(void) +{ + base_cpu = sched_getcpu(); + if (base_cpu < 0) + err(-ENODEV, "No valid cpus found"); +} + + +void probe_dev_msr(void) +{ + struct stat sb; + char pathname[32]; + + sprintf(pathname, "/dev/cpu/%d/msr", base_cpu); + if (stat(pathname, &sb)) + if (system("/sbin/modprobe msr > /dev/null 2>&1")) + err(-5, "no /dev/cpu/0/msr, Try \"# modprobe msr\" "); +} + +static void get_cpuid_or_exit(unsigned int leaf, + unsigned int *eax, unsigned int *ebx, + unsigned int *ecx, unsigned int *edx) +{ + if (!__get_cpuid(leaf, eax, ebx, ecx, edx)) + errx(1, "Processor not supported\n"); +} + +/* + * early_cpuid() + * initialize turbo_is_enabled, has_hwp, has_epb + * before cmdline is parsed + */ +void early_cpuid(void) +{ + unsigned int eax, ebx, ecx, edx; + unsigned int fms, family, model; + + get_cpuid_or_exit(1, &fms, &ebx, &ecx, &edx); + family = (fms >> 8) & 0xf; + model = (fms >> 4) & 0xf; + if (family == 6 || family == 0xf) + model += ((fms >> 16) & 0xf) << 4; + + if (model == 0x4F) { + unsigned long long msr; + + get_msr(base_cpu, MSR_TURBO_RATIO_LIMIT, &msr); + + bdx_highest_ratio = msr & 0xFF; + } + + get_cpuid_or_exit(0x6, &eax, &ebx, &ecx, &edx); + turbo_is_enabled = (eax >> 1) & 1; + has_hwp = (eax >> 7) & 1; + has_epb = (ecx >> 3) & 1; +} + +/* + * parse_cpuid() + * set + * has_hwp, has_hwp_notify, has_hwp_activity_window, has_hwp_epp, has_hwp_request_pkg, has_epb + */ +void parse_cpuid(void) +{ + unsigned int eax, ebx, ecx, edx, max_level; + unsigned int fms, family, model, stepping; + + eax = ebx = ecx = edx = 0; + + get_cpuid_or_exit(0, &max_level, &ebx, &ecx, &edx); + + if (ebx == 0x756e6547 && edx == 0x49656e69 && ecx == 0x6c65746e) + genuine_intel = 1; + + if (debug) + fprintf(stderr, "CPUID(0): %.4s%.4s%.4s ", + (char *)&ebx, (char *)&edx, (char *)&ecx); + + get_cpuid_or_exit(1, &fms, &ebx, &ecx, &edx); + family = (fms >> 8) & 0xf; + model = (fms >> 4) & 0xf; + stepping = fms & 0xf; + if (family == 6 || family == 0xf) + model += ((fms >> 16) & 0xf) << 4; + + if (debug) { + fprintf(stderr, "%d CPUID levels; family:model:stepping 0x%x:%x:%x (%d:%d:%d)\n", + max_level, family, model, stepping, family, model, stepping); + fprintf(stderr, "CPUID(1): %s %s %s %s %s %s %s %s\n", + ecx & (1 << 0) ? "SSE3" : "-", + ecx & (1 << 3) ? "MONITOR" : "-", + ecx & (1 << 7) ? "EIST" : "-", + ecx & (1 << 8) ? "TM2" : "-", + edx & (1 << 4) ? "TSC" : "-", + edx & (1 << 5) ? "MSR" : "-", + edx & (1 << 22) ? "ACPI-TM" : "-", + edx & (1 << 29) ? "TM" : "-"); + } + + if (!(edx & (1 << 5))) + errx(1, "CPUID: no MSR"); + + + get_cpuid_or_exit(0x6, &eax, &ebx, &ecx, &edx); + /* turbo_is_enabled already set */ + /* has_hwp already set */ + has_hwp_notify = eax & (1 << 8); + has_hwp_activity_window = eax & (1 << 9); + has_hwp_epp = eax & (1 << 10); + has_hwp_request_pkg = eax & (1 << 11); + + if (!has_hwp_request_pkg && update_hwp_use_pkg) + errx(1, "--hwp-use-pkg is not available on this hardware"); + + /* has_epb already set */ + + if (debug) + fprintf(stderr, + "CPUID(6): %sTURBO, %sHWP, %sHWPnotify, %sHWPwindow, %sHWPepp, %sHWPpkg, %sEPB\n", + turbo_is_enabled ? "" : "No-", + has_hwp ? "" : "No-", + has_hwp_notify ? "" : "No-", + has_hwp_activity_window ? "" : "No-", + has_hwp_epp ? "" : "No-", + has_hwp_request_pkg ? "" : "No-", + has_epb ? "" : "No-"); + + return; /* success */ +} + +int main(int argc, char **argv) +{ + set_base_cpu(); + probe_dev_msr(); + init_data_structures(); + + early_cpuid(); /* initial cpuid parse before cmdline */ + + cmdline(argc, argv); + + if (debug) + print_version(); + + parse_cpuid(); + + /* If CPU-set and PKG-set are not initialized, default to all CPUs */ + if ((cpu_selected_set == 0) && (pkg_selected_set == 0)) + cpu_selected_set = cpu_present_set; + + /* + * If HWP is being enabled, do it now, so that subsequent operations + * that access HWP registers can work. + */ + if (update_hwp_enable) + for_all_cpus_in_set(cpu_setsize, cpu_selected_set, enable_hwp_on_cpu); + + /* If HWP present, but disabled, warn and ignore from here forward */ + verify_hwp_is_enabled(); + + if (req_update_bounds_check()) + return -EINVAL; + + /* display information only, no updates to settings */ + if (!update_epb && !update_turbo && !hwp_update_enabled()) { + if (cpu_selected_set) + for_all_cpus_in_set(cpu_setsize, cpu_selected_set, print_cpu_msrs); + + if (has_hwp_request_pkg) { + if (pkg_selected_set == 0) + pkg_selected_set = pkg_present_set; + + for_packages(pkg_selected_set, print_pkg_msrs); + } + + return 0; + } + + /* update CPU set */ + if (cpu_selected_set) { + for_all_cpus_in_set(cpu_setsize, cpu_selected_set, update_sysfs); + for_all_cpus_in_set(cpu_setsize, cpu_selected_set, update_cpu_msrs); + } else if (pkg_selected_set) + for_packages(pkg_selected_set, update_hwp_request_pkg); + + return 0; +} |