diff options
Diffstat (limited to '')
-rwxr-xr-x | tools/testing/selftests/drivers/net/mlxsw/vxlan_flooding.sh | 326 |
1 files changed, 326 insertions, 0 deletions
diff --git a/tools/testing/selftests/drivers/net/mlxsw/vxlan_flooding.sh b/tools/testing/selftests/drivers/net/mlxsw/vxlan_flooding.sh new file mode 100755 index 000000000..af5ea50ed --- /dev/null +++ b/tools/testing/selftests/drivers/net/mlxsw/vxlan_flooding.sh @@ -0,0 +1,326 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 +# +# Test VxLAN flooding. The device stores flood records in a singly linked list +# where each record stores up to three IPv4 addresses of remote VTEPs. The test +# verifies that packets are correctly flooded in various cases such as deletion +# of a record in the middle of the list. +# +# +--------------------+ +# | H1 (vrf) | +# | + $h1 | +# | | 203.0.113.1/24| +# +----|---------------+ +# | +# +----|----------------------------------------------------------------------+ +# | SW | | +# | +--|--------------------------------------------------------------------+ | +# | | + $swp1 BR0 (802.1d) | | +# | | | | +# | | + vxlan0 (vxlan) | | +# | | local 198.51.100.1 | | +# | | remote 198.51.100.{2..13} | | +# | | id 10 dstport 4789 | | +# | +-----------------------------------------------------------------------+ | +# | | +# | 198.51.100.0/24 via 192.0.2.2 | +# | | +# | + $rp1 | +# | | 192.0.2.1/24 | +# +----|----------------------------------------------------------------------+ +# | +# +----|--------------------------------------------------------+ +# | | R2 (vrf) | +# | + $rp2 | +# | 192.0.2.2/24 | +# | | +# +-------------------------------------------------------------+ + +lib_dir=$(dirname $0)/../../../net/forwarding + +ALL_TESTS="flooding_test" +NUM_NETIFS=4 +source $lib_dir/tc_common.sh +source $lib_dir/lib.sh + +h1_create() +{ + simple_if_init $h1 203.0.113.1/24 +} + +h1_destroy() +{ + simple_if_fini $h1 203.0.113.1/24 +} + +switch_create() +{ + # Make sure the bridge uses the MAC address of the local port and + # not that of the VxLAN's device + ip link add dev br0 type bridge mcast_snooping 0 + ip link set dev br0 address $(mac_get $swp1) + + ip link add name vxlan0 type vxlan id 10 nolearning noudpcsum \ + ttl 20 tos inherit local 198.51.100.1 dstport 4789 + + ip address add 198.51.100.1/32 dev lo + + ip link set dev $swp1 master br0 + ip link set dev vxlan0 master br0 + + ip link set dev br0 up + ip link set dev $swp1 up + ip link set dev vxlan0 up +} + +switch_destroy() +{ + ip link set dev vxlan0 down + ip link set dev $swp1 down + ip link set dev br0 down + + ip link set dev vxlan0 nomaster + ip link set dev $swp1 nomaster + + ip address del 198.51.100.1/32 dev lo + + ip link del dev vxlan0 + + ip link del dev br0 +} + +router1_create() +{ + # This router is in the default VRF, where the VxLAN device is + # performing the L3 lookup + ip link set dev $rp1 up + ip address add 192.0.2.1/24 dev $rp1 + ip route add 198.51.100.0/24 via 192.0.2.2 +} + +router1_destroy() +{ + ip route del 198.51.100.0/24 via 192.0.2.2 + ip address del 192.0.2.1/24 dev $rp1 + ip link set dev $rp1 down +} + +router2_create() +{ + # This router is not in the default VRF, so use simple_if_init() + simple_if_init $rp2 192.0.2.2/24 +} + +router2_destroy() +{ + simple_if_fini $rp2 192.0.2.2/24 +} + +setup_prepare() +{ + h1=${NETIFS[p1]} + swp1=${NETIFS[p2]} + + rp1=${NETIFS[p3]} + rp2=${NETIFS[p4]} + + vrf_prepare + + h1_create + + switch_create + + router1_create + router2_create + + forwarding_enable +} + +cleanup() +{ + pre_cleanup + + forwarding_restore + + router2_destroy + router1_destroy + + switch_destroy + + h1_destroy + + vrf_cleanup +} + +flooding_remotes_add() +{ + local num_remotes=$1 + local lsb + local i + + for i in $(eval echo {1..$num_remotes}); do + lsb=$((i + 1)) + + bridge fdb append 00:00:00:00:00:00 dev vxlan0 self \ + dst 198.51.100.$lsb + done +} + +flooding_filters_add() +{ + local num_remotes=$1 + local lsb + local i + + # Prevent unwanted packets from entering the bridge and interfering + # with the test. + tc qdisc add dev br0 clsact + tc filter add dev br0 egress protocol all pref 1 handle 1 \ + matchall skip_hw action drop + tc qdisc add dev $h1 clsact + tc filter add dev $h1 egress protocol all pref 1 handle 1 \ + flower skip_hw dst_mac de:ad:be:ef:13:37 action pass + tc filter add dev $h1 egress protocol all pref 2 handle 2 \ + matchall skip_hw action drop + + tc qdisc add dev $rp2 clsact + + for i in $(eval echo {1..$num_remotes}); do + lsb=$((i + 1)) + + tc filter add dev $rp2 ingress protocol ip pref $i handle $i \ + flower ip_proto udp dst_ip 198.51.100.$lsb \ + dst_port 4789 skip_sw action drop + done +} + +flooding_filters_del() +{ + local num_remotes=$1 + local i + + for i in $(eval echo {1..$num_remotes}); do + tc filter del dev $rp2 ingress protocol ip pref $i \ + handle $i flower + done + + tc qdisc del dev $rp2 clsact + + tc filter del dev $h1 egress protocol all pref 2 handle 2 matchall + tc filter del dev $h1 egress protocol all pref 1 handle 1 flower + tc qdisc del dev $h1 clsact + tc filter del dev br0 egress protocol all pref 1 handle 1 matchall + tc qdisc del dev br0 clsact +} + +flooding_check_packets() +{ + local packets=("$@") + local num_remotes=${#packets[@]} + local i + + for i in $(eval echo {1..$num_remotes}); do + tc_check_packets "dev $rp2 ingress" $i ${packets[i - 1]} + check_err $? "remote $i - did not get expected number of packets" + done +} + +flooding_test() +{ + # Use 12 remote VTEPs that will be stored in 4 records. The array + # 'packets' will store how many packets are expected to be received + # by each remote VTEP at each stage of the test + declare -a packets=(1 1 1 1 1 1 1 1 1 1 1 1) + local num_remotes=12 + + RET=0 + + # Add FDB entries for remote VTEPs and corresponding tc filters on the + # ingress of the nexthop router. These filters will count how many + # packets were flooded to each remote VTEP + flooding_remotes_add $num_remotes + flooding_filters_add $num_remotes + + # Send one packet and make sure it is flooded to all the remote VTEPs + $MZ $h1 -q -p 64 -b de:ad:be:ef:13:37 -t ip -c 1 + flooding_check_packets "${packets[@]}" + log_test "flood after 1 packet" + + # Delete the third record which corresponds to VTEPs with LSB 8..10 + # and check that packet is flooded correctly when we remove a record + # from the middle of the list + RET=0 + + packets=(2 2 2 2 2 2 1 1 1 2 2 2) + bridge fdb del 00:00:00:00:00:00 dev vxlan0 self dst 198.51.100.8 + bridge fdb del 00:00:00:00:00:00 dev vxlan0 self dst 198.51.100.9 + bridge fdb del 00:00:00:00:00:00 dev vxlan0 self dst 198.51.100.10 + + $MZ $h1 -q -p 64 -b de:ad:be:ef:13:37 -t ip -c 1 + flooding_check_packets "${packets[@]}" + log_test "flood after 2 packets" + + # Delete the first record and make sure the packet is flooded correctly + RET=0 + + packets=(2 2 2 3 3 3 1 1 1 3 3 3) + bridge fdb del 00:00:00:00:00:00 dev vxlan0 self dst 198.51.100.2 + bridge fdb del 00:00:00:00:00:00 dev vxlan0 self dst 198.51.100.3 + bridge fdb del 00:00:00:00:00:00 dev vxlan0 self dst 198.51.100.4 + + $MZ $h1 -q -p 64 -b de:ad:be:ef:13:37 -t ip -c 1 + flooding_check_packets "${packets[@]}" + log_test "flood after 3 packets" + + # Delete the last record and make sure the packet is flooded correctly + RET=0 + + packets=(2 2 2 4 4 4 1 1 1 3 3 3) + bridge fdb del 00:00:00:00:00:00 dev vxlan0 self dst 198.51.100.11 + bridge fdb del 00:00:00:00:00:00 dev vxlan0 self dst 198.51.100.12 + bridge fdb del 00:00:00:00:00:00 dev vxlan0 self dst 198.51.100.13 + + $MZ $h1 -q -p 64 -b de:ad:be:ef:13:37 -t ip -c 1 + flooding_check_packets "${packets[@]}" + log_test "flood after 4 packets" + + # Delete the last record, one entry at a time and make sure single + # entries are correctly removed + RET=0 + + packets=(2 2 2 4 5 5 1 1 1 3 3 3) + bridge fdb del 00:00:00:00:00:00 dev vxlan0 self dst 198.51.100.5 + + $MZ $h1 -q -p 64 -b de:ad:be:ef:13:37 -t ip -c 1 + flooding_check_packets "${packets[@]}" + log_test "flood after 5 packets" + + RET=0 + + packets=(2 2 2 4 5 6 1 1 1 3 3 3) + bridge fdb del 00:00:00:00:00:00 dev vxlan0 self dst 198.51.100.6 + + $MZ $h1 -q -p 64 -b de:ad:be:ef:13:37 -t ip -c 1 + flooding_check_packets "${packets[@]}" + log_test "flood after 6 packets" + + RET=0 + + packets=(2 2 2 4 5 6 1 1 1 3 3 3) + bridge fdb del 00:00:00:00:00:00 dev vxlan0 self dst 198.51.100.7 + + $MZ $h1 -q -p 64 -b de:ad:be:ef:13:37 -t ip -c 1 + flooding_check_packets "${packets[@]}" + log_test "flood after 7 packets" + + flooding_filters_del $num_remotes +} + +trap cleanup EXIT + +setup_prepare +setup_wait + +tests_run + +exit $EXIT_STATUS |