summaryrefslogtreecommitdiffstats
path: root/tools/testing/selftests/firmware/fw_filesystem.sh
diff options
context:
space:
mode:
Diffstat (limited to '')
-rwxr-xr-xtools/testing/selftests/firmware/fw_filesystem.sh552
1 files changed, 552 insertions, 0 deletions
diff --git a/tools/testing/selftests/firmware/fw_filesystem.sh b/tools/testing/selftests/firmware/fw_filesystem.sh
new file mode 100755
index 000000000..c2a2a1001
--- /dev/null
+++ b/tools/testing/selftests/firmware/fw_filesystem.sh
@@ -0,0 +1,552 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+# This validates that the kernel will load firmware out of its list of
+# firmware locations on disk. Since the user helper does similar work,
+# we reset the custom load directory to a location the user helper doesn't
+# know so we can be sure we're not accidentally testing the user helper.
+set -e
+
+TEST_REQS_FW_SYSFS_FALLBACK="no"
+TEST_REQS_FW_SET_CUSTOM_PATH="yes"
+TEST_DIR=$(dirname $0)
+source $TEST_DIR/fw_lib.sh
+
+check_mods
+check_setup
+verify_reqs
+setup_tmp_file
+
+trap "test_finish" EXIT
+
+if [ "$HAS_FW_LOADER_USER_HELPER" = "yes" ]; then
+ # Turn down the timeout so failures don't take so long.
+ echo 1 >/sys/class/firmware/timeout
+fi
+
+if printf '\000' >"$DIR"/trigger_request 2> /dev/null; then
+ echo "$0: empty filename should not succeed" >&2
+ exit 1
+fi
+
+if [ ! -e "$DIR"/trigger_async_request ]; then
+ echo "$0: empty filename: async trigger not present, ignoring test" >&2
+ exit $ksft_skip
+else
+ if printf '\000' >"$DIR"/trigger_async_request 2> /dev/null; then
+ echo "$0: empty filename should not succeed (async)" >&2
+ exit 1
+ fi
+fi
+
+# Request a firmware that doesn't exist, it should fail.
+if echo -n "nope-$NAME" >"$DIR"/trigger_request 2> /dev/null; then
+ echo "$0: firmware shouldn't have loaded" >&2
+ exit 1
+fi
+if diff -q "$FW" /dev/test_firmware >/dev/null ; then
+ echo "$0: firmware was not expected to match" >&2
+ exit 1
+else
+ if [ "$HAS_FW_LOADER_USER_HELPER" = "yes" ]; then
+ echo "$0: timeout works"
+ fi
+fi
+
+# This should succeed via kernel load or will fail after 1 second after
+# being handed over to the user helper, which won't find the fw either.
+if ! echo -n "$NAME" >"$DIR"/trigger_request ; then
+ echo "$0: could not trigger request" >&2
+ exit 1
+fi
+
+# Verify the contents are what we expect.
+if ! diff -q "$FW" /dev/test_firmware >/dev/null ; then
+ echo "$0: firmware was not loaded" >&2
+ exit 1
+else
+ echo "$0: filesystem loading works"
+fi
+
+# Try the asynchronous version too
+if [ ! -e "$DIR"/trigger_async_request ]; then
+ echo "$0: firmware loading: async trigger not present, ignoring test" >&2
+ exit $ksft_skip
+else
+ if ! echo -n "$NAME" >"$DIR"/trigger_async_request ; then
+ echo "$0: could not trigger async request" >&2
+ exit 1
+ fi
+
+ # Verify the contents are what we expect.
+ if ! diff -q "$FW" /dev/test_firmware >/dev/null ; then
+ echo "$0: firmware was not loaded (async)" >&2
+ exit 1
+ else
+ echo "$0: async filesystem loading works"
+ fi
+fi
+
+# Try platform (EFI embedded fw) loading too
+if [ ! -e "$DIR"/trigger_request_platform ]; then
+ echo "$0: firmware loading: platform trigger not present, ignoring test" >&2
+else
+ if printf '\000' >"$DIR"/trigger_request_platform 2> /dev/null; then
+ echo "$0: empty filename should not succeed (platform)" >&2
+ exit 1
+ fi
+
+ # Note we echo a non-existing name, since files on the file-system
+ # are preferred over firmware embedded inside the platform's firmware
+ # The test adds a fake entry with the requested name to the platform's
+ # fw list, so the name does not matter as long as it does not exist
+ if ! echo -n "nope-$NAME" >"$DIR"/trigger_request_platform ; then
+ echo "$0: could not trigger request platform" >&2
+ exit 1
+ fi
+
+ # The test verifies itself that the loaded firmware contents matches
+ # the contents for the fake platform fw entry it added.
+ echo "$0: platform loading works"
+fi
+
+### Batched requests tests
+test_config_present()
+{
+ if [ ! -f $DIR/reset ]; then
+ echo "Configuration triggers not present, ignoring test"
+ exit $ksft_skip
+ fi
+}
+
+# Defaults :
+#
+# send_uevent: 1
+# sync_direct: 0
+# name: test-firmware.bin
+# num_requests: 4
+config_reset()
+{
+ echo 1 > $DIR/reset
+}
+
+release_all_firmware()
+{
+ echo 1 > $DIR/release_all_firmware
+}
+
+config_set_name()
+{
+ echo -n $1 > $DIR/config_name
+}
+
+config_set_into_buf()
+{
+ echo 1 > $DIR/config_into_buf
+}
+
+config_unset_into_buf()
+{
+ echo 0 > $DIR/config_into_buf
+}
+
+config_set_buf_size()
+{
+ echo $1 > $DIR/config_buf_size
+}
+
+config_set_file_offset()
+{
+ echo $1 > $DIR/config_file_offset
+}
+
+config_set_partial()
+{
+ echo 1 > $DIR/config_partial
+}
+
+config_unset_partial()
+{
+ echo 0 > $DIR/config_partial
+}
+
+config_set_sync_direct()
+{
+ echo 1 > $DIR/config_sync_direct
+}
+
+config_unset_sync_direct()
+{
+ echo 0 > $DIR/config_sync_direct
+}
+
+config_set_uevent()
+{
+ echo 1 > $DIR/config_send_uevent
+}
+
+config_unset_uevent()
+{
+ echo 0 > $DIR/config_send_uevent
+}
+
+config_trigger_sync()
+{
+ echo -n 1 > $DIR/trigger_batched_requests 2>/dev/null
+}
+
+config_trigger_async()
+{
+ echo -n 1 > $DIR/trigger_batched_requests_async 2> /dev/null
+}
+
+config_set_read_fw_idx()
+{
+ echo -n $1 > $DIR/config_read_fw_idx 2> /dev/null
+}
+
+read_firmwares()
+{
+ if [ "$(cat $DIR/config_into_buf)" == "1" ]; then
+ fwfile="$FW_INTO_BUF"
+ else
+ fwfile="$FW"
+ fi
+ if [ "$1" = "xzonly" ]; then
+ fwfile="${fwfile}-orig"
+ fi
+ for i in $(seq 0 3); do
+ config_set_read_fw_idx $i
+ # Verify the contents are what we expect.
+ # -Z required for now -- check for yourself, md5sum
+ # on $FW and DIR/read_firmware will yield the same. Even
+ # cmp agrees, so something is off.
+ if ! diff -q -Z "$fwfile" $DIR/read_firmware 2>/dev/null ; then
+ echo "request #$i: firmware was not loaded" >&2
+ exit 1
+ fi
+ done
+}
+
+read_partial_firmwares()
+{
+ if [ "$(cat $DIR/config_into_buf)" == "1" ]; then
+ fwfile="${FW_INTO_BUF}"
+ else
+ fwfile="${FW}"
+ fi
+
+ if [ "$1" = "xzonly" ]; then
+ fwfile="${fwfile}-orig"
+ fi
+
+ # Strip fwfile down to match partial offset and length
+ partial_data="$(cat $fwfile)"
+ partial_data="${partial_data:$2:$3}"
+
+ for i in $(seq 0 3); do
+ config_set_read_fw_idx $i
+
+ read_firmware="$(cat $DIR/read_firmware)"
+
+ # Verify the contents are what we expect.
+ if [ $read_firmware != $partial_data ]; then
+ echo "request #$i: partial firmware was not loaded" >&2
+ exit 1
+ fi
+ done
+}
+
+read_firmwares_expect_nofile()
+{
+ for i in $(seq 0 3); do
+ config_set_read_fw_idx $i
+ # Ensures contents differ
+ if diff -q -Z "$FW" $DIR/read_firmware 2>/dev/null ; then
+ echo "request $i: file was not expected to match" >&2
+ exit 1
+ fi
+ done
+}
+
+test_batched_request_firmware_nofile()
+{
+ echo -n "Batched request_firmware() nofile try #$1: "
+ config_reset
+ config_set_name nope-test-firmware.bin
+ config_trigger_sync
+ read_firmwares_expect_nofile
+ release_all_firmware
+ echo "OK"
+}
+
+test_batched_request_firmware_into_buf_nofile()
+{
+ echo -n "Batched request_firmware_into_buf() nofile try #$1: "
+ config_reset
+ config_set_name nope-test-firmware.bin
+ config_set_into_buf
+ config_trigger_sync
+ read_firmwares_expect_nofile
+ release_all_firmware
+ echo "OK"
+}
+
+test_request_partial_firmware_into_buf_nofile()
+{
+ echo -n "Test request_partial_firmware_into_buf() off=$1 size=$2 nofile: "
+ config_reset
+ config_set_name nope-test-firmware.bin
+ config_set_into_buf
+ config_set_partial
+ config_set_buf_size $2
+ config_set_file_offset $1
+ config_trigger_sync
+ read_firmwares_expect_nofile
+ release_all_firmware
+ echo "OK"
+}
+
+test_batched_request_firmware_direct_nofile()
+{
+ echo -n "Batched request_firmware_direct() nofile try #$1: "
+ config_reset
+ config_set_name nope-test-firmware.bin
+ config_set_sync_direct
+ config_trigger_sync
+ release_all_firmware
+ echo "OK"
+}
+
+test_request_firmware_nowait_uevent_nofile()
+{
+ echo -n "Batched request_firmware_nowait(uevent=true) nofile try #$1: "
+ config_reset
+ config_set_name nope-test-firmware.bin
+ config_trigger_async
+ release_all_firmware
+ echo "OK"
+}
+
+test_wait_and_cancel_custom_load()
+{
+ if [ "$HAS_FW_LOADER_USER_HELPER" != "yes" ]; then
+ return
+ fi
+ local timeout=10
+ name=$1
+ while [ ! -e "$DIR"/"$name"/loading ]; do
+ sleep 0.1
+ timeout=$(( $timeout - 1 ))
+ if [ "$timeout" -eq 0 ]; then
+ echo "firmware interface never appeared:" >&2
+ echo "$DIR/$name/loading" >&2
+ exit 1
+ fi
+ done
+ echo -1 >"$DIR"/"$name"/loading
+}
+
+test_request_firmware_nowait_custom_nofile()
+{
+ echo -n "Batched request_firmware_nowait(uevent=false) nofile try #$1: "
+ config_reset
+ config_unset_uevent
+ RANDOM_FILE_PATH=$(setup_random_file_fake)
+ RANDOM_FILE="$(basename $RANDOM_FILE_PATH)"
+ config_set_name $RANDOM_FILE
+ config_trigger_async &
+ test_wait_and_cancel_custom_load $RANDOM_FILE
+ wait
+ release_all_firmware
+ echo "OK"
+}
+
+test_batched_request_firmware()
+{
+ echo -n "Batched request_firmware() $2 try #$1: "
+ config_reset
+ config_trigger_sync
+ read_firmwares $2
+ release_all_firmware
+ echo "OK"
+}
+
+test_batched_request_firmware_into_buf()
+{
+ echo -n "Batched request_firmware_into_buf() $2 try #$1: "
+ config_reset
+ config_set_name $TEST_FIRMWARE_INTO_BUF_FILENAME
+ config_set_into_buf
+ config_trigger_sync
+ read_firmwares $2
+ release_all_firmware
+ echo "OK"
+}
+
+test_batched_request_firmware_direct()
+{
+ echo -n "Batched request_firmware_direct() $2 try #$1: "
+ config_reset
+ config_set_sync_direct
+ config_trigger_sync
+ release_all_firmware
+ echo "OK"
+}
+
+test_request_firmware_nowait_uevent()
+{
+ echo -n "Batched request_firmware_nowait(uevent=true) $2 try #$1: "
+ config_reset
+ config_trigger_async
+ release_all_firmware
+ echo "OK"
+}
+
+test_request_firmware_nowait_custom()
+{
+ echo -n "Batched request_firmware_nowait(uevent=false) $2 try #$1: "
+ config_reset
+ config_unset_uevent
+ RANDOM_FILE_PATH=$(setup_random_file)
+ RANDOM_FILE="$(basename $RANDOM_FILE_PATH)"
+ if [ "$2" = "both" ]; then
+ xz -9 -C crc32 -k $RANDOM_FILE_PATH
+ elif [ "$2" = "xzonly" ]; then
+ xz -9 -C crc32 $RANDOM_FILE_PATH
+ fi
+ config_set_name $RANDOM_FILE
+ config_trigger_async
+ release_all_firmware
+ echo "OK"
+}
+
+test_request_partial_firmware_into_buf()
+{
+ echo -n "Test request_partial_firmware_into_buf() off=$1 size=$2: "
+ config_reset
+ config_set_name $TEST_FIRMWARE_INTO_BUF_FILENAME
+ config_set_into_buf
+ config_set_partial
+ config_set_buf_size $2
+ config_set_file_offset $1
+ config_trigger_sync
+ read_partial_firmwares normal $1 $2
+ release_all_firmware
+ echo "OK"
+}
+
+# Only continue if batched request triggers are present on the
+# test-firmware driver
+test_config_present
+
+# test with the file present
+echo
+echo "Testing with the file present..."
+for i in $(seq 1 5); do
+ test_batched_request_firmware $i normal
+done
+
+for i in $(seq 1 5); do
+ test_batched_request_firmware_into_buf $i normal
+done
+
+for i in $(seq 1 5); do
+ test_batched_request_firmware_direct $i normal
+done
+
+for i in $(seq 1 5); do
+ test_request_firmware_nowait_uevent $i normal
+done
+
+for i in $(seq 1 5); do
+ test_request_firmware_nowait_custom $i normal
+done
+
+# Partial loads cannot use fallback, so do not repeat tests.
+test_request_partial_firmware_into_buf 0 10
+test_request_partial_firmware_into_buf 0 5
+test_request_partial_firmware_into_buf 1 6
+test_request_partial_firmware_into_buf 2 10
+
+# Test for file not found, errors are expected, the failure would be
+# a hung task, which would require a hard reset.
+echo
+echo "Testing with the file missing..."
+for i in $(seq 1 5); do
+ test_batched_request_firmware_nofile $i
+done
+
+for i in $(seq 1 5); do
+ test_batched_request_firmware_into_buf_nofile $i
+done
+
+for i in $(seq 1 5); do
+ test_batched_request_firmware_direct_nofile $i
+done
+
+for i in $(seq 1 5); do
+ test_request_firmware_nowait_uevent_nofile $i
+done
+
+for i in $(seq 1 5); do
+ test_request_firmware_nowait_custom_nofile $i
+done
+
+# Partial loads cannot use fallback, so do not repeat tests.
+test_request_partial_firmware_into_buf_nofile 0 10
+test_request_partial_firmware_into_buf_nofile 0 5
+test_request_partial_firmware_into_buf_nofile 1 6
+test_request_partial_firmware_into_buf_nofile 2 10
+
+test "$HAS_FW_LOADER_COMPRESS" != "yes" && exit 0
+
+# test with both files present
+xz -9 -C crc32 -k $FW
+config_set_name $NAME
+echo
+echo "Testing with both plain and xz files present..."
+for i in $(seq 1 5); do
+ test_batched_request_firmware $i both
+done
+
+for i in $(seq 1 5); do
+ test_batched_request_firmware_into_buf $i both
+done
+
+for i in $(seq 1 5); do
+ test_batched_request_firmware_direct $i both
+done
+
+for i in $(seq 1 5); do
+ test_request_firmware_nowait_uevent $i both
+done
+
+for i in $(seq 1 5); do
+ test_request_firmware_nowait_custom $i both
+done
+
+# test with only xz file present
+mv "$FW" "${FW}-orig"
+echo
+echo "Testing with only xz file present..."
+for i in $(seq 1 5); do
+ test_batched_request_firmware $i xzonly
+done
+
+for i in $(seq 1 5); do
+ test_batched_request_firmware_into_buf $i xzonly
+done
+
+for i in $(seq 1 5); do
+ test_batched_request_firmware_direct $i xzonly
+done
+
+for i in $(seq 1 5); do
+ test_request_firmware_nowait_uevent $i xzonly
+done
+
+for i in $(seq 1 5); do
+ test_request_firmware_nowait_custom $i xzonly
+done
+
+exit 0