diff options
Diffstat (limited to '')
-rw-r--r-- | tools/testing/selftests/net/forwarding/lib.sh | 1300 |
1 files changed, 1300 insertions, 0 deletions
diff --git a/tools/testing/selftests/net/forwarding/lib.sh b/tools/testing/selftests/net/forwarding/lib.sh new file mode 100644 index 000000000..dfb41db7f --- /dev/null +++ b/tools/testing/selftests/net/forwarding/lib.sh @@ -0,0 +1,1300 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 + +############################################################################## +# Defines + +# Can be overridden by the configuration file. +PING=${PING:=ping} +PING6=${PING6:=ping6} +MZ=${MZ:=mausezahn} +ARPING=${ARPING:=arping} +TEAMD=${TEAMD:=teamd} +WAIT_TIME=${WAIT_TIME:=5} +PAUSE_ON_FAIL=${PAUSE_ON_FAIL:=no} +PAUSE_ON_CLEANUP=${PAUSE_ON_CLEANUP:=no} +NETIF_TYPE=${NETIF_TYPE:=veth} +NETIF_CREATE=${NETIF_CREATE:=yes} +MCD=${MCD:=smcrouted} +MC_CLI=${MC_CLI:=smcroutectl} +PING_TIMEOUT=${PING_TIMEOUT:=5} +WAIT_TIMEOUT=${WAIT_TIMEOUT:=20} +INTERFACE_TIMEOUT=${INTERFACE_TIMEOUT:=600} + +relative_path="${BASH_SOURCE%/*}" +if [[ "$relative_path" == "${BASH_SOURCE}" ]]; then + relative_path="." +fi + +if [[ -f $relative_path/forwarding.config ]]; then + source "$relative_path/forwarding.config" +fi + +############################################################################## +# Sanity checks + +check_tc_version() +{ + tc -j &> /dev/null + if [[ $? -ne 0 ]]; then + echo "SKIP: iproute2 too old; tc is missing JSON support" + exit 1 + fi +} + +check_tc_shblock_support() +{ + tc filter help 2>&1 | grep block &> /dev/null + if [[ $? -ne 0 ]]; then + echo "SKIP: iproute2 too old; tc is missing shared block support" + exit 1 + fi +} + +check_tc_chain_support() +{ + tc help 2>&1|grep chain &> /dev/null + if [[ $? -ne 0 ]]; then + echo "SKIP: iproute2 too old; tc is missing chain support" + exit 1 + fi +} + +check_tc_action_hw_stats_support() +{ + tc actions help 2>&1 | grep -q hw_stats + if [[ $? -ne 0 ]]; then + echo "SKIP: iproute2 too old; tc is missing action hw_stats support" + exit 1 + fi +} + +skip_on_veth() +{ + local kind=$(ip -j -d link show dev ${NETIFS[p1]} | + jq -r '.[].linkinfo.info_kind') + + if [[ $kind == veth ]]; then + echo "SKIP: Test cannot be run with veth pairs" + exit $ksft_skip + fi +} + +if [[ "$(id -u)" -ne 0 ]]; then + echo "SKIP: need root privileges" + exit 0 +fi + +if [[ "$CHECK_TC" = "yes" ]]; then + check_tc_version +fi + +require_command() +{ + local cmd=$1; shift + + if [[ ! -x "$(command -v "$cmd")" ]]; then + echo "SKIP: $cmd not installed" + exit 1 + fi +} + +require_command jq +require_command $MZ + +if [[ ! -v NUM_NETIFS ]]; then + echo "SKIP: importer does not define \"NUM_NETIFS\"" + exit 1 +fi + +############################################################################## +# Command line options handling + +count=0 + +while [[ $# -gt 0 ]]; do + if [[ "$count" -eq "0" ]]; then + unset NETIFS + declare -A NETIFS + fi + count=$((count + 1)) + NETIFS[p$count]="$1" + shift +done + +############################################################################## +# Network interfaces configuration + +create_netif_veth() +{ + local i + + for ((i = 1; i <= NUM_NETIFS; ++i)); do + local j=$((i+1)) + + if [ -z ${NETIFS[p$i]} ]; then + echo "SKIP: Cannot create interface. Name not specified" + exit $ksft_skip + fi + + ip link show dev ${NETIFS[p$i]} &> /dev/null + if [[ $? -ne 0 ]]; then + ip link add ${NETIFS[p$i]} type veth \ + peer name ${NETIFS[p$j]} + if [[ $? -ne 0 ]]; then + echo "Failed to create netif" + exit 1 + fi + fi + i=$j + done +} + +create_netif() +{ + case "$NETIF_TYPE" in + veth) create_netif_veth + ;; + *) echo "Can not create interfaces of type \'$NETIF_TYPE\'" + exit 1 + ;; + esac +} + +if [[ "$NETIF_CREATE" = "yes" ]]; then + create_netif +fi + +for ((i = 1; i <= NUM_NETIFS; ++i)); do + ip link show dev ${NETIFS[p$i]} &> /dev/null + if [[ $? -ne 0 ]]; then + echo "SKIP: could not find all required interfaces" + exit 1 + fi +done + +############################################################################## +# Helpers + +# Exit status to return at the end. Set in case one of the tests fails. +EXIT_STATUS=0 +# Per-test return value. Clear at the beginning of each test. +RET=0 + +check_err() +{ + local err=$1 + local msg=$2 + + if [[ $RET -eq 0 && $err -ne 0 ]]; then + RET=$err + retmsg=$msg + fi +} + +check_fail() +{ + local err=$1 + local msg=$2 + + if [[ $RET -eq 0 && $err -eq 0 ]]; then + RET=1 + retmsg=$msg + fi +} + +check_err_fail() +{ + local should_fail=$1; shift + local err=$1; shift + local what=$1; shift + + if ((should_fail)); then + check_fail $err "$what succeeded, but should have failed" + else + check_err $err "$what failed" + fi +} + +log_test() +{ + local test_name=$1 + local opt_str=$2 + + if [[ $# -eq 2 ]]; then + opt_str="($opt_str)" + fi + + if [[ $RET -ne 0 ]]; then + EXIT_STATUS=1 + printf "TEST: %-60s [FAIL]\n" "$test_name $opt_str" + if [[ ! -z "$retmsg" ]]; then + printf "\t%s\n" "$retmsg" + fi + if [ "${PAUSE_ON_FAIL}" = "yes" ]; then + echo "Hit enter to continue, 'q' to quit" + read a + [ "$a" = "q" ] && exit 1 + fi + return 1 + fi + + printf "TEST: %-60s [ OK ]\n" "$test_name $opt_str" + return 0 +} + +log_info() +{ + local msg=$1 + + echo "INFO: $msg" +} + +busywait() +{ + local timeout=$1; shift + + local start_time="$(date -u +%s%3N)" + while true + do + local out + out=$("$@") + local ret=$? + if ((!ret)); then + echo -n "$out" + return 0 + fi + + local current_time="$(date -u +%s%3N)" + if ((current_time - start_time > timeout)); then + echo -n "$out" + return 1 + fi + done +} + +not() +{ + "$@" + [[ $? != 0 ]] +} + +grep_bridge_fdb() +{ + local addr=$1; shift + local word + local flag + + if [ "$1" == "self" ] || [ "$1" == "master" ]; then + word=$1; shift + if [ "$1" == "-v" ]; then + flag=$1; shift + fi + fi + + $@ | grep $addr | grep $flag "$word" +} + +wait_for_offload() +{ + "$@" | grep -q offload +} + +until_counter_is() +{ + local expr=$1; shift + local current=$("$@") + + echo $((current)) + ((current $expr)) +} + +busywait_for_counter() +{ + local timeout=$1; shift + local delta=$1; shift + + local base=$("$@") + busywait "$timeout" until_counter_is ">= $((base + delta))" "$@" +} + +setup_wait_dev() +{ + local dev=$1; shift + local wait_time=${1:-$WAIT_TIME}; shift + + setup_wait_dev_with_timeout "$dev" $INTERFACE_TIMEOUT $wait_time + + if (($?)); then + check_err 1 + log_test setup_wait_dev ": Interface $dev does not come up." + exit 1 + fi +} + +setup_wait_dev_with_timeout() +{ + local dev=$1; shift + local max_iterations=${1:-$WAIT_TIMEOUT}; shift + local wait_time=${1:-$WAIT_TIME}; shift + local i + + for ((i = 1; i <= $max_iterations; ++i)); do + ip link show dev $dev up \ + | grep 'state UP' &> /dev/null + if [[ $? -ne 0 ]]; then + sleep 1 + else + sleep $wait_time + return 0 + fi + done + + return 1 +} + +setup_wait() +{ + local num_netifs=${1:-$NUM_NETIFS} + local i + + for ((i = 1; i <= num_netifs; ++i)); do + setup_wait_dev ${NETIFS[p$i]} 0 + done + + # Make sure links are ready. + sleep $WAIT_TIME +} + +cmd_jq() +{ + local cmd=$1 + local jq_exp=$2 + local jq_opts=$3 + local ret + local output + + output="$($cmd)" + # it the command fails, return error right away + ret=$? + if [[ $ret -ne 0 ]]; then + return $ret + fi + output=$(echo $output | jq -r $jq_opts "$jq_exp") + ret=$? + if [[ $ret -ne 0 ]]; then + return $ret + fi + echo $output + # return success only in case of non-empty output + [ ! -z "$output" ] +} + +lldpad_app_wait_set() +{ + local dev=$1; shift + + while lldptool -t -i $dev -V APP -c app | grep -Eq "pending|unknown"; do + echo "$dev: waiting for lldpad to push pending APP updates" + sleep 5 + done +} + +lldpad_app_wait_del() +{ + # Give lldpad a chance to push down the changes. If the device is downed + # too soon, the updates will be left pending. However, they will have + # been struck off the lldpad's DB already, so we won't be able to tell + # they are pending. Then on next test iteration this would cause + # weirdness as newly-added APP rules conflict with the old ones, + # sometimes getting stuck in an "unknown" state. + sleep 5 +} + +pre_cleanup() +{ + if [ "${PAUSE_ON_CLEANUP}" = "yes" ]; then + echo "Pausing before cleanup, hit any key to continue" + read + fi +} + +vrf_prepare() +{ + ip -4 rule add pref 32765 table local + ip -4 rule del pref 0 + ip -6 rule add pref 32765 table local + ip -6 rule del pref 0 +} + +vrf_cleanup() +{ + ip -6 rule add pref 0 table local + ip -6 rule del pref 32765 + ip -4 rule add pref 0 table local + ip -4 rule del pref 32765 +} + +__last_tb_id=0 +declare -A __TB_IDS + +__vrf_td_id_assign() +{ + local vrf_name=$1 + + __last_tb_id=$((__last_tb_id + 1)) + __TB_IDS[$vrf_name]=$__last_tb_id + return $__last_tb_id +} + +__vrf_td_id_lookup() +{ + local vrf_name=$1 + + return ${__TB_IDS[$vrf_name]} +} + +vrf_create() +{ + local vrf_name=$1 + local tb_id + + __vrf_td_id_assign $vrf_name + tb_id=$? + + ip link add dev $vrf_name type vrf table $tb_id + ip -4 route add table $tb_id unreachable default metric 4278198272 + ip -6 route add table $tb_id unreachable default metric 4278198272 +} + +vrf_destroy() +{ + local vrf_name=$1 + local tb_id + + __vrf_td_id_lookup $vrf_name + tb_id=$? + + ip -6 route del table $tb_id unreachable default metric 4278198272 + ip -4 route del table $tb_id unreachable default metric 4278198272 + ip link del dev $vrf_name +} + +__addr_add_del() +{ + local if_name=$1 + local add_del=$2 + local array + + shift + shift + array=("${@}") + + for addrstr in "${array[@]}"; do + ip address $add_del $addrstr dev $if_name + done +} + +__simple_if_init() +{ + local if_name=$1; shift + local vrf_name=$1; shift + local addrs=("${@}") + + ip link set dev $if_name master $vrf_name + ip link set dev $if_name up + + __addr_add_del $if_name add "${addrs[@]}" +} + +__simple_if_fini() +{ + local if_name=$1; shift + local addrs=("${@}") + + __addr_add_del $if_name del "${addrs[@]}" + + ip link set dev $if_name down + ip link set dev $if_name nomaster +} + +simple_if_init() +{ + local if_name=$1 + local vrf_name + local array + + shift + vrf_name=v$if_name + array=("${@}") + + vrf_create $vrf_name + ip link set dev $vrf_name up + __simple_if_init $if_name $vrf_name "${array[@]}" +} + +simple_if_fini() +{ + local if_name=$1 + local vrf_name + local array + + shift + vrf_name=v$if_name + array=("${@}") + + __simple_if_fini $if_name "${array[@]}" + vrf_destroy $vrf_name +} + +tunnel_create() +{ + local name=$1; shift + local type=$1; shift + local local=$1; shift + local remote=$1; shift + + ip link add name $name type $type \ + local $local remote $remote "$@" + ip link set dev $name up +} + +tunnel_destroy() +{ + local name=$1; shift + + ip link del dev $name +} + +vlan_create() +{ + local if_name=$1; shift + local vid=$1; shift + local vrf=$1; shift + local ips=("${@}") + local name=$if_name.$vid + + ip link add name $name link $if_name type vlan id $vid + if [ "$vrf" != "" ]; then + ip link set dev $name master $vrf + fi + ip link set dev $name up + __addr_add_del $name add "${ips[@]}" +} + +vlan_destroy() +{ + local if_name=$1; shift + local vid=$1; shift + local name=$if_name.$vid + + ip link del dev $name +} + +team_create() +{ + local if_name=$1; shift + local mode=$1; shift + + require_command $TEAMD + $TEAMD -t $if_name -d -c '{"runner": {"name": "'$mode'"}}' + for slave in "$@"; do + ip link set dev $slave down + ip link set dev $slave master $if_name + ip link set dev $slave up + done + ip link set dev $if_name up +} + +team_destroy() +{ + local if_name=$1; shift + + $TEAMD -t $if_name -k +} + +master_name_get() +{ + local if_name=$1 + + ip -j link show dev $if_name | jq -r '.[]["master"]' +} + +link_stats_get() +{ + local if_name=$1; shift + local dir=$1; shift + local stat=$1; shift + + ip -j -s link show dev $if_name \ + | jq '.[]["stats64"]["'$dir'"]["'$stat'"]' +} + +link_stats_tx_packets_get() +{ + link_stats_get $1 tx packets +} + +link_stats_rx_errors_get() +{ + link_stats_get $1 rx errors +} + +tc_rule_stats_get() +{ + local dev=$1; shift + local pref=$1; shift + local dir=$1; shift + local selector=${1:-.packets}; shift + + tc -j -s filter show dev $dev ${dir:-ingress} pref $pref \ + | jq ".[1].options.actions[].stats$selector" +} + +tc_rule_handle_stats_get() +{ + local id=$1; shift + local handle=$1; shift + local selector=${1:-.packets}; shift + + tc -j -s filter show $id \ + | jq ".[] | select(.options.handle == $handle) | \ + .options.actions[0].stats$selector" +} + +ethtool_stats_get() +{ + local dev=$1; shift + local stat=$1; shift + + ethtool -S $dev | grep "^ *$stat:" | head -n 1 | cut -d: -f2 +} + +qdisc_stats_get() +{ + local dev=$1; shift + local handle=$1; shift + local selector=$1; shift + + tc -j -s qdisc show dev "$dev" \ + | jq '.[] | select(.handle == "'"$handle"'") | '"$selector" +} + +qdisc_parent_stats_get() +{ + local dev=$1; shift + local parent=$1; shift + local selector=$1; shift + + tc -j -s qdisc show dev "$dev" invisible \ + | jq '.[] | select(.parent == "'"$parent"'") | '"$selector" +} + +ipv6_stats_get() +{ + local dev=$1; shift + local stat=$1; shift + + cat /proc/net/dev_snmp6/$dev | grep "^$stat" | cut -f2 +} + +humanize() +{ + local speed=$1; shift + + for unit in bps Kbps Mbps Gbps; do + if (($(echo "$speed < 1024" | bc))); then + break + fi + + speed=$(echo "scale=1; $speed / 1024" | bc) + done + + echo "$speed${unit}" +} + +rate() +{ + local t0=$1; shift + local t1=$1; shift + local interval=$1; shift + + echo $((8 * (t1 - t0) / interval)) +} + +mac_get() +{ + local if_name=$1 + + ip -j link show dev $if_name | jq -r '.[]["address"]' +} + +bridge_ageing_time_get() +{ + local bridge=$1 + local ageing_time + + # Need to divide by 100 to convert to seconds. + ageing_time=$(ip -j -d link show dev $bridge \ + | jq '.[]["linkinfo"]["info_data"]["ageing_time"]') + echo $((ageing_time / 100)) +} + +declare -A SYSCTL_ORIG +sysctl_set() +{ + local key=$1; shift + local value=$1; shift + + SYSCTL_ORIG[$key]=$(sysctl -n $key) + sysctl -qw $key="$value" +} + +sysctl_restore() +{ + local key=$1; shift + + sysctl -qw $key="${SYSCTL_ORIG[$key]}" +} + +forwarding_enable() +{ + sysctl_set net.ipv4.conf.all.forwarding 1 + sysctl_set net.ipv6.conf.all.forwarding 1 +} + +forwarding_restore() +{ + sysctl_restore net.ipv6.conf.all.forwarding + sysctl_restore net.ipv4.conf.all.forwarding +} + +declare -A MTU_ORIG +mtu_set() +{ + local dev=$1; shift + local mtu=$1; shift + + MTU_ORIG["$dev"]=$(ip -j link show dev $dev | jq -e '.[].mtu') + ip link set dev $dev mtu $mtu +} + +mtu_restore() +{ + local dev=$1; shift + + ip link set dev $dev mtu ${MTU_ORIG["$dev"]} +} + +tc_offload_check() +{ + local num_netifs=${1:-$NUM_NETIFS} + + for ((i = 1; i <= num_netifs; ++i)); do + ethtool -k ${NETIFS[p$i]} \ + | grep "hw-tc-offload: on" &> /dev/null + if [[ $? -ne 0 ]]; then + return 1 + fi + done + + return 0 +} + +trap_install() +{ + local dev=$1; shift + local direction=$1; shift + + # Some devices may not support or need in-hardware trapping of traffic + # (e.g. the veth pairs that this library creates for non-existent + # loopbacks). Use continue instead, so that there is a filter in there + # (some tests check counters), and so that other filters are still + # processed. + tc filter add dev $dev $direction pref 1 \ + flower skip_sw action trap 2>/dev/null \ + || tc filter add dev $dev $direction pref 1 \ + flower action continue +} + +trap_uninstall() +{ + local dev=$1; shift + local direction=$1; shift + + tc filter del dev $dev $direction pref 1 flower +} + +slow_path_trap_install() +{ + # For slow-path testing, we need to install a trap to get to + # slow path the packets that would otherwise be switched in HW. + if [ "${tcflags/skip_hw}" != "$tcflags" ]; then + trap_install "$@" + fi +} + +slow_path_trap_uninstall() +{ + if [ "${tcflags/skip_hw}" != "$tcflags" ]; then + trap_uninstall "$@" + fi +} + +__icmp_capture_add_del() +{ + local add_del=$1; shift + local pref=$1; shift + local vsuf=$1; shift + local tundev=$1; shift + local filter=$1; shift + + tc filter $add_del dev "$tundev" ingress \ + proto ip$vsuf pref $pref \ + flower ip_proto icmp$vsuf $filter \ + action pass +} + +icmp_capture_install() +{ + __icmp_capture_add_del add 100 "" "$@" +} + +icmp_capture_uninstall() +{ + __icmp_capture_add_del del 100 "" "$@" +} + +icmp6_capture_install() +{ + __icmp_capture_add_del add 100 v6 "$@" +} + +icmp6_capture_uninstall() +{ + __icmp_capture_add_del del 100 v6 "$@" +} + +__vlan_capture_add_del() +{ + local add_del=$1; shift + local pref=$1; shift + local dev=$1; shift + local filter=$1; shift + + tc filter $add_del dev "$dev" ingress \ + proto 802.1q pref $pref \ + flower $filter \ + action pass +} + +vlan_capture_install() +{ + __vlan_capture_add_del add 100 "$@" +} + +vlan_capture_uninstall() +{ + __vlan_capture_add_del del 100 "$@" +} + +__dscp_capture_add_del() +{ + local add_del=$1; shift + local dev=$1; shift + local base=$1; shift + local dscp; + + for prio in {0..7}; do + dscp=$((base + prio)) + __icmp_capture_add_del $add_del $((dscp + 100)) "" $dev \ + "skip_hw ip_tos $((dscp << 2))" + done +} + +dscp_capture_install() +{ + local dev=$1; shift + local base=$1; shift + + __dscp_capture_add_del add $dev $base +} + +dscp_capture_uninstall() +{ + local dev=$1; shift + local base=$1; shift + + __dscp_capture_add_del del $dev $base +} + +dscp_fetch_stats() +{ + local dev=$1; shift + local base=$1; shift + + for prio in {0..7}; do + local dscp=$((base + prio)) + local t=$(tc_rule_stats_get $dev $((dscp + 100))) + echo "[$dscp]=$t " + done +} + +matchall_sink_create() +{ + local dev=$1; shift + + tc qdisc add dev $dev clsact + tc filter add dev $dev ingress \ + pref 10000 \ + matchall \ + action drop +} + +tests_run() +{ + local current_test + + for current_test in ${TESTS:-$ALL_TESTS}; do + $current_test + done +} + +multipath_eval() +{ + local desc="$1" + local weight_rp12=$2 + local weight_rp13=$3 + local packets_rp12=$4 + local packets_rp13=$5 + local weights_ratio packets_ratio diff + + RET=0 + + if [[ "$weight_rp12" -gt "$weight_rp13" ]]; then + weights_ratio=$(echo "scale=2; $weight_rp12 / $weight_rp13" \ + | bc -l) + else + weights_ratio=$(echo "scale=2; $weight_rp13 / $weight_rp12" \ + | bc -l) + fi + + if [[ "$packets_rp12" -eq "0" || "$packets_rp13" -eq "0" ]]; then + check_err 1 "Packet difference is 0" + log_test "Multipath" + log_info "Expected ratio $weights_ratio" + return + fi + + if [[ "$weight_rp12" -gt "$weight_rp13" ]]; then + packets_ratio=$(echo "scale=2; $packets_rp12 / $packets_rp13" \ + | bc -l) + else + packets_ratio=$(echo "scale=2; $packets_rp13 / $packets_rp12" \ + | bc -l) + fi + + diff=$(echo $weights_ratio - $packets_ratio | bc -l) + diff=${diff#-} + + test "$(echo "$diff / $weights_ratio > 0.15" | bc -l)" -eq 0 + check_err $? "Too large discrepancy between expected and measured ratios" + log_test "$desc" + log_info "Expected ratio $weights_ratio Measured ratio $packets_ratio" +} + +in_ns() +{ + local name=$1; shift + + ip netns exec $name bash <<-EOF + NUM_NETIFS=0 + source lib.sh + $(for a in "$@"; do printf "%q${IFS:0:1}" "$a"; done) + EOF +} + +############################################################################## +# Tests + +ping_do() +{ + local if_name=$1 + local dip=$2 + local args=$3 + local vrf_name + + vrf_name=$(master_name_get $if_name) + ip vrf exec $vrf_name \ + $PING $args $dip -c 10 -i 0.1 -w $PING_TIMEOUT &> /dev/null +} + +ping_test() +{ + RET=0 + + ping_do $1 $2 + check_err $? + log_test "ping$3" +} + +ping6_do() +{ + local if_name=$1 + local dip=$2 + local args=$3 + local vrf_name + + vrf_name=$(master_name_get $if_name) + ip vrf exec $vrf_name \ + $PING6 $args $dip -c 10 -i 0.1 -w $PING_TIMEOUT &> /dev/null +} + +ping6_test() +{ + RET=0 + + ping6_do $1 $2 + check_err $? + log_test "ping6$3" +} + +learning_test() +{ + local bridge=$1 + local br_port1=$2 # Connected to `host1_if`. + local host1_if=$3 + local host2_if=$4 + local mac=de:ad:be:ef:13:37 + local ageing_time + + RET=0 + + bridge -j fdb show br $bridge brport $br_port1 \ + | jq -e ".[] | select(.mac == \"$mac\")" &> /dev/null + check_fail $? "Found FDB record when should not" + + # Disable unknown unicast flooding on `br_port1` to make sure + # packets are only forwarded through the port after a matching + # FDB entry was installed. + bridge link set dev $br_port1 flood off + + ip link set $host1_if promisc on + tc qdisc add dev $host1_if ingress + tc filter add dev $host1_if ingress protocol ip pref 1 handle 101 \ + flower dst_mac $mac action drop + + $MZ $host2_if -c 1 -p 64 -b $mac -t ip -q + sleep 1 + + tc -j -s filter show dev $host1_if ingress \ + | jq -e ".[] | select(.options.handle == 101) \ + | select(.options.actions[0].stats.packets == 1)" &> /dev/null + check_fail $? "Packet reached first host when should not" + + $MZ $host1_if -c 1 -p 64 -a $mac -t ip -q + sleep 1 + + bridge -j fdb show br $bridge brport $br_port1 \ + | jq -e ".[] | select(.mac == \"$mac\")" &> /dev/null + check_err $? "Did not find FDB record when should" + + $MZ $host2_if -c 1 -p 64 -b $mac -t ip -q + sleep 1 + + tc -j -s filter show dev $host1_if ingress \ + | jq -e ".[] | select(.options.handle == 101) \ + | select(.options.actions[0].stats.packets == 1)" &> /dev/null + check_err $? "Packet did not reach second host when should" + + # Wait for 10 seconds after the ageing time to make sure FDB + # record was aged-out. + ageing_time=$(bridge_ageing_time_get $bridge) + sleep $((ageing_time + 10)) + + bridge -j fdb show br $bridge brport $br_port1 \ + | jq -e ".[] | select(.mac == \"$mac\")" &> /dev/null + check_fail $? "Found FDB record when should not" + + bridge link set dev $br_port1 learning off + + $MZ $host1_if -c 1 -p 64 -a $mac -t ip -q + sleep 1 + + bridge -j fdb show br $bridge brport $br_port1 \ + | jq -e ".[] | select(.mac == \"$mac\")" &> /dev/null + check_fail $? "Found FDB record when should not" + + bridge link set dev $br_port1 learning on + + tc filter del dev $host1_if ingress protocol ip pref 1 handle 101 flower + tc qdisc del dev $host1_if ingress + ip link set $host1_if promisc off + + bridge link set dev $br_port1 flood on + + log_test "FDB learning" +} + +flood_test_do() +{ + local should_flood=$1 + local mac=$2 + local ip=$3 + local host1_if=$4 + local host2_if=$5 + local err=0 + + # Add an ACL on `host2_if` which will tell us whether the packet + # was flooded to it or not. + ip link set $host2_if promisc on + tc qdisc add dev $host2_if ingress + tc filter add dev $host2_if ingress protocol ip pref 1 handle 101 \ + flower dst_mac $mac action drop + + $MZ $host1_if -c 1 -p 64 -b $mac -B $ip -t ip -q + sleep 1 + + tc -j -s filter show dev $host2_if ingress \ + | jq -e ".[] | select(.options.handle == 101) \ + | select(.options.actions[0].stats.packets == 1)" &> /dev/null + if [[ $? -ne 0 && $should_flood == "true" || \ + $? -eq 0 && $should_flood == "false" ]]; then + err=1 + fi + + tc filter del dev $host2_if ingress protocol ip pref 1 handle 101 flower + tc qdisc del dev $host2_if ingress + ip link set $host2_if promisc off + + return $err +} + +flood_unicast_test() +{ + local br_port=$1 + local host1_if=$2 + local host2_if=$3 + local mac=de:ad:be:ef:13:37 + local ip=192.0.2.100 + + RET=0 + + bridge link set dev $br_port flood off + + flood_test_do false $mac $ip $host1_if $host2_if + check_err $? "Packet flooded when should not" + + bridge link set dev $br_port flood on + + flood_test_do true $mac $ip $host1_if $host2_if + check_err $? "Packet was not flooded when should" + + log_test "Unknown unicast flood" +} + +flood_multicast_test() +{ + local br_port=$1 + local host1_if=$2 + local host2_if=$3 + local mac=01:00:5e:00:00:01 + local ip=239.0.0.1 + + RET=0 + + bridge link set dev $br_port mcast_flood off + + flood_test_do false $mac $ip $host1_if $host2_if + check_err $? "Packet flooded when should not" + + bridge link set dev $br_port mcast_flood on + + flood_test_do true $mac $ip $host1_if $host2_if + check_err $? "Packet was not flooded when should" + + log_test "Unregistered multicast flood" +} + +flood_test() +{ + # `br_port` is connected to `host2_if` + local br_port=$1 + local host1_if=$2 + local host2_if=$3 + + flood_unicast_test $br_port $host1_if $host2_if + flood_multicast_test $br_port $host1_if $host2_if +} + +__start_traffic() +{ + local proto=$1; shift + local h_in=$1; shift # Where the traffic egresses the host + local sip=$1; shift + local dip=$1; shift + local dmac=$1; shift + + $MZ $h_in -p 8000 -A $sip -B $dip -c 0 \ + -a own -b $dmac -t "$proto" -q "$@" & + sleep 1 +} + +start_traffic() +{ + __start_traffic udp "$@" +} + +start_tcp_traffic() +{ + __start_traffic tcp "$@" +} + +stop_traffic() +{ + # Suppress noise from killing mausezahn. + { kill %% && wait %%; } 2>/dev/null +} + +tcpdump_start() +{ + local if_name=$1; shift + local ns=$1; shift + + capfile=$(mktemp) + capout=$(mktemp) + + if [ -z $ns ]; then + ns_cmd="" + else + ns_cmd="ip netns exec ${ns}" + fi + + if [ -z $SUDO_USER ] ; then + capuser="" + else + capuser="-Z $SUDO_USER" + fi + + $ns_cmd tcpdump -e -n -Q in -i $if_name \ + -s 65535 -B 32768 $capuser -w $capfile > "$capout" 2>&1 & + cappid=$! + + sleep 1 +} + +tcpdump_stop() +{ + $ns_cmd kill $cappid + sleep 1 +} + +tcpdump_cleanup() +{ + rm $capfile $capout +} + +tcpdump_show() +{ + tcpdump -e -n -r $capfile 2>&1 +} |