summaryrefslogtreecommitdiffstats
path: root/tools/testing/selftests/zram
diff options
context:
space:
mode:
Diffstat (limited to '')
-rw-r--r--tools/testing/selftests/zram/Makefile9
-rw-r--r--tools/testing/selftests/zram/README40
-rw-r--r--tools/testing/selftests/zram/config2
-rwxr-xr-xtools/testing/selftests/zram/zram.sh18
-rwxr-xr-xtools/testing/selftests/zram/zram01.sh75
-rwxr-xr-xtools/testing/selftests/zram/zram02.sh44
-rwxr-xr-xtools/testing/selftests/zram/zram_lib.sh269
7 files changed, 457 insertions, 0 deletions
diff --git a/tools/testing/selftests/zram/Makefile b/tools/testing/selftests/zram/Makefile
new file mode 100644
index 000000000..7f78eb1b5
--- /dev/null
+++ b/tools/testing/selftests/zram/Makefile
@@ -0,0 +1,9 @@
+# SPDX-License-Identifier: GPL-2.0
+all:
+
+TEST_PROGS := zram.sh
+TEST_FILES := zram01.sh zram02.sh zram_lib.sh
+EXTRA_CLEAN := err.log
+
+include ../lib.mk
+
diff --git a/tools/testing/selftests/zram/README b/tools/testing/selftests/zram/README
new file mode 100644
index 000000000..110b34834
--- /dev/null
+++ b/tools/testing/selftests/zram/README
@@ -0,0 +1,40 @@
+zram: Compressed RAM based block devices
+----------------------------------------
+* Introduction
+
+The zram module creates RAM based block devices named /dev/zram<id>
+(<id> = 0, 1, ...). Pages written to these disks are compressed and stored
+in memory itself. These disks allow very fast I/O and compression provides
+good amounts of memory savings. Some of the usecases include /tmp storage,
+use as swap disks, various caches under /var and maybe many more :)
+
+Statistics for individual zram devices are exported through sysfs nodes at
+/sys/block/zram<id>/
+
+Kconfig required:
+CONFIG_ZRAM=y
+CONFIG_CRYPTO_LZ4=y
+CONFIG_ZPOOL=y
+CONFIG_ZSMALLOC=y
+
+ZRAM Testcases
+--------------
+zram_lib.sh: create library with initialization/cleanup functions
+zram.sh: For sanity check of CONFIG_ZRAM and to run zram01 and zram02
+
+Two functional tests: zram01 and zram02:
+zram01.sh: creates general purpose ram disks with ext4 filesystems
+zram02.sh: creates block device for swap
+
+Commands required for testing:
+ - bc
+ - dd
+ - free
+ - awk
+ - mkswap
+ - swapon
+ - swapoff
+ - mkfs/ mkfs.ext4
+
+For more information please refer:
+kernel-source-tree/Documentation/admin-guide/blockdev/zram.rst
diff --git a/tools/testing/selftests/zram/config b/tools/testing/selftests/zram/config
new file mode 100644
index 000000000..e0cc47e2c
--- /dev/null
+++ b/tools/testing/selftests/zram/config
@@ -0,0 +1,2 @@
+CONFIG_ZSMALLOC=y
+CONFIG_ZRAM=m
diff --git a/tools/testing/selftests/zram/zram.sh b/tools/testing/selftests/zram/zram.sh
new file mode 100755
index 000000000..b0b91d9b0
--- /dev/null
+++ b/tools/testing/selftests/zram/zram.sh
@@ -0,0 +1,18 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+TCID="zram.sh"
+
+. ./zram_lib.sh
+
+run_zram () {
+echo "--------------------"
+echo "running zram tests"
+echo "--------------------"
+./zram01.sh
+echo ""
+./zram02.sh
+}
+
+check_prereqs
+
+run_zram
diff --git a/tools/testing/selftests/zram/zram01.sh b/tools/testing/selftests/zram/zram01.sh
new file mode 100755
index 000000000..8f4affe34
--- /dev/null
+++ b/tools/testing/selftests/zram/zram01.sh
@@ -0,0 +1,75 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0-or-later
+# Copyright (c) 2015 Oracle and/or its affiliates. All Rights Reserved.
+#
+# Test creates several zram devices with different filesystems on them.
+# It fills each device with zeros and checks that compression works.
+#
+# Author: Alexey Kodanev <alexey.kodanev@oracle.com>
+# Modified: Naresh Kamboju <naresh.kamboju@linaro.org>
+
+TCID="zram01"
+ERR_CODE=0
+
+. ./zram_lib.sh
+
+# Test will create the following number of zram devices:
+dev_num=1
+# This is a list of parameters for zram devices.
+# Number of items must be equal to 'dev_num' parameter.
+zram_max_streams="2"
+
+# The zram sysfs node 'disksize' value can be either in bytes,
+# or you can use mem suffixes. But in some old kernels, mem
+# suffixes are not supported, for example, in RHEL6.6GA's kernel
+# layer, it uses strict_strtoull() to parse disksize which does
+# not support mem suffixes, in some newer kernels, they use
+# memparse() which supports mem suffixes. So here we just use
+# bytes to make sure everything works correctly.
+zram_sizes="2097152" # 2MB
+zram_mem_limits="2M"
+zram_filesystems="ext4"
+zram_algs="lzo"
+
+zram_fill_fs()
+{
+ for i in $(seq $dev_start $dev_end); do
+ echo "fill zram$i..."
+ local b=0
+ while [ true ]; do
+ dd conv=notrunc if=/dev/zero of=zram${i}/file \
+ oflag=append count=1 bs=1024 status=none \
+ > /dev/null 2>&1 || break
+ b=$(($b + 1))
+ done
+ echo "zram$i can be filled with '$b' KB"
+
+ local mem_used_total=`awk '{print $3}' "/sys/block/zram$i/mm_stat"`
+ local v=$((100 * 1024 * $b / $mem_used_total))
+ if [ "$v" -lt 100 ]; then
+ echo "FAIL compression ratio: 0.$v:1"
+ ERR_CODE=-1
+ return
+ fi
+
+ echo "zram compression ratio: $(echo "scale=2; $v / 100 " | bc):1: OK"
+ done
+}
+
+check_prereqs
+zram_load
+zram_max_streams
+zram_compress_alg
+zram_set_disksizes
+zram_set_memlimit
+zram_makefs
+zram_mount
+
+zram_fill_fs
+zram_cleanup
+
+if [ $ERR_CODE -ne 0 ]; then
+ echo "$TCID : [FAIL]"
+else
+ echo "$TCID : [PASS]"
+fi
diff --git a/tools/testing/selftests/zram/zram02.sh b/tools/testing/selftests/zram/zram02.sh
new file mode 100755
index 000000000..2418b0c4e
--- /dev/null
+++ b/tools/testing/selftests/zram/zram02.sh
@@ -0,0 +1,44 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0-or-later
+# Copyright (c) 2015 Oracle and/or its affiliates. All Rights Reserved.
+#
+# Test checks that we can create swap zram device.
+#
+# Author: Alexey Kodanev <alexey.kodanev@oracle.com>
+# Modified: Naresh Kamboju <naresh.kamboju@linaro.org>
+
+TCID="zram02"
+ERR_CODE=0
+
+. ./zram_lib.sh
+
+# Test will create the following number of zram devices:
+dev_num=1
+# This is a list of parameters for zram devices.
+# Number of items must be equal to 'dev_num' parameter.
+zram_max_streams="2"
+
+# The zram sysfs node 'disksize' value can be either in bytes,
+# or you can use mem suffixes. But in some old kernels, mem
+# suffixes are not supported, for example, in RHEL6.6GA's kernel
+# layer, it uses strict_strtoull() to parse disksize which does
+# not support mem suffixes, in some newer kernels, they use
+# memparse() which supports mem suffixes. So here we just use
+# bytes to make sure everything works correctly.
+zram_sizes="1048576" # 1M
+zram_mem_limits="1M"
+
+check_prereqs
+zram_load
+zram_max_streams
+zram_set_disksizes
+zram_set_memlimit
+zram_makeswap
+zram_swapoff
+zram_cleanup
+
+if [ $ERR_CODE -ne 0 ]; then
+ echo "$TCID : [FAIL]"
+else
+ echo "$TCID : [PASS]"
+fi
diff --git a/tools/testing/selftests/zram/zram_lib.sh b/tools/testing/selftests/zram/zram_lib.sh
new file mode 100755
index 000000000..21ec1966d
--- /dev/null
+++ b/tools/testing/selftests/zram/zram_lib.sh
@@ -0,0 +1,269 @@
+#!/bin/sh
+# SPDX-License-Identifier: GPL-2.0-or-later
+# Copyright (c) 2015 Oracle and/or its affiliates. All Rights Reserved.
+#
+# Author: Alexey Kodanev <alexey.kodanev@oracle.com>
+# Modified: Naresh Kamboju <naresh.kamboju@linaro.org>
+
+dev_makeswap=-1
+dev_mounted=-1
+dev_start=0
+dev_end=-1
+module_load=-1
+sys_control=-1
+# Kselftest framework requirement - SKIP code is 4.
+ksft_skip=4
+kernel_version=`uname -r | cut -d'.' -f1,2`
+kernel_major=${kernel_version%.*}
+kernel_minor=${kernel_version#*.}
+
+trap INT
+
+check_prereqs()
+{
+ local msg="skip all tests:"
+ local uid=$(id -u)
+
+ if [ $uid -ne 0 ]; then
+ echo $msg must be run as root >&2
+ exit $ksft_skip
+ fi
+}
+
+kernel_gte()
+{
+ major=${1%.*}
+ minor=${1#*.}
+
+ if [ $kernel_major -gt $major ]; then
+ return 0
+ elif [[ $kernel_major -eq $major && $kernel_minor -ge $minor ]]; then
+ return 0
+ fi
+
+ return 1
+}
+
+zram_cleanup()
+{
+ echo "zram cleanup"
+ local i=
+ for i in $(seq $dev_start $dev_makeswap); do
+ swapoff /dev/zram$i
+ done
+
+ for i in $(seq $dev_start $dev_mounted); do
+ umount /dev/zram$i
+ done
+
+ for i in $(seq $dev_start $dev_end); do
+ echo 1 > /sys/block/zram${i}/reset
+ rm -rf zram$i
+ done
+
+ if [ $sys_control -eq 1 ]; then
+ for i in $(seq $dev_start $dev_end); do
+ echo $i > /sys/class/zram-control/hot_remove
+ done
+ fi
+
+ if [ $module_load -eq 1 ]; then
+ rmmod zram > /dev/null 2>&1
+ fi
+}
+
+zram_load()
+{
+ echo "create '$dev_num' zram device(s)"
+
+ # zram module loaded, new kernel
+ if [ -d "/sys/class/zram-control" ]; then
+ echo "zram modules already loaded, kernel supports" \
+ "zram-control interface"
+ dev_start=$(ls /dev/zram* | wc -w)
+ dev_end=$(($dev_start + $dev_num - 1))
+ sys_control=1
+
+ for i in $(seq $dev_start $dev_end); do
+ cat /sys/class/zram-control/hot_add > /dev/null
+ done
+
+ echo "all zram devices (/dev/zram$dev_start~$dev_end" \
+ "successfully created"
+ return 0
+ fi
+
+ # detect old kernel or built-in
+ modprobe zram num_devices=$dev_num
+ if [ ! -d "/sys/class/zram-control" ]; then
+ if grep -q '^zram' /proc/modules; then
+ rmmod zram > /dev/null 2>&1
+ if [ $? -ne 0 ]; then
+ echo "zram module is being used on old kernel" \
+ "without zram-control interface"
+ exit $ksft_skip
+ fi
+ else
+ echo "test needs CONFIG_ZRAM=m on old kernel without" \
+ "zram-control interface"
+ exit $ksft_skip
+ fi
+ modprobe zram num_devices=$dev_num
+ fi
+
+ module_load=1
+ dev_end=$(($dev_num - 1))
+ echo "all zram devices (/dev/zram0~$dev_end) successfully created"
+}
+
+zram_max_streams()
+{
+ echo "set max_comp_streams to zram device(s)"
+
+ kernel_gte 4.7
+ if [ $? -eq 0 ]; then
+ echo "The device attribute max_comp_streams was"\
+ "deprecated in 4.7"
+ return 0
+ fi
+
+ local i=$dev_start
+ for max_s in $zram_max_streams; do
+ local sys_path="/sys/block/zram${i}/max_comp_streams"
+ echo $max_s > $sys_path || \
+ echo "FAIL failed to set '$max_s' to $sys_path"
+ sleep 1
+ local max_streams=$(cat $sys_path)
+
+ [ "$max_s" -ne "$max_streams" ] && \
+ echo "FAIL can't set max_streams '$max_s', get $max_stream"
+
+ i=$(($i + 1))
+ echo "$sys_path = '$max_streams'"
+ done
+
+ echo "zram max streams: OK"
+}
+
+zram_compress_alg()
+{
+ echo "test that we can set compression algorithm"
+
+ local i=$dev_start
+ local algs=$(cat /sys/block/zram${i}/comp_algorithm)
+ echo "supported algs: $algs"
+
+ for alg in $zram_algs; do
+ local sys_path="/sys/block/zram${i}/comp_algorithm"
+ echo "$alg" > $sys_path || \
+ echo "FAIL can't set '$alg' to $sys_path"
+ i=$(($i + 1))
+ echo "$sys_path = '$alg'"
+ done
+
+ echo "zram set compression algorithm: OK"
+}
+
+zram_set_disksizes()
+{
+ echo "set disk size to zram device(s)"
+ local i=$dev_start
+ for ds in $zram_sizes; do
+ local sys_path="/sys/block/zram${i}/disksize"
+ echo "$ds" > $sys_path || \
+ echo "FAIL can't set '$ds' to $sys_path"
+
+ i=$(($i + 1))
+ echo "$sys_path = '$ds'"
+ done
+
+ echo "zram set disksizes: OK"
+}
+
+zram_set_memlimit()
+{
+ echo "set memory limit to zram device(s)"
+
+ local i=$dev_start
+ for ds in $zram_mem_limits; do
+ local sys_path="/sys/block/zram${i}/mem_limit"
+ echo "$ds" > $sys_path || \
+ echo "FAIL can't set '$ds' to $sys_path"
+
+ i=$(($i + 1))
+ echo "$sys_path = '$ds'"
+ done
+
+ echo "zram set memory limit: OK"
+}
+
+zram_makeswap()
+{
+ echo "make swap with zram device(s)"
+ local i=$dev_start
+ for i in $(seq $dev_start $dev_end); do
+ mkswap /dev/zram$i > err.log 2>&1
+ if [ $? -ne 0 ]; then
+ cat err.log
+ echo "FAIL mkswap /dev/zram$1 failed"
+ fi
+
+ swapon /dev/zram$i > err.log 2>&1
+ if [ $? -ne 0 ]; then
+ cat err.log
+ echo "FAIL swapon /dev/zram$1 failed"
+ fi
+
+ echo "done with /dev/zram$i"
+ dev_makeswap=$i
+ done
+
+ echo "zram making zram mkswap and swapon: OK"
+}
+
+zram_swapoff()
+{
+ local i=
+ for i in $(seq $dev_start $dev_end); do
+ swapoff /dev/zram$i > err.log 2>&1
+ if [ $? -ne 0 ]; then
+ cat err.log
+ echo "FAIL swapoff /dev/zram$i failed"
+ fi
+ done
+ dev_makeswap=-1
+
+ echo "zram swapoff: OK"
+}
+
+zram_makefs()
+{
+ local i=$dev_start
+ for fs in $zram_filesystems; do
+ # if requested fs not supported default it to ext2
+ which mkfs.$fs > /dev/null 2>&1 || fs=ext2
+
+ echo "make $fs filesystem on /dev/zram$i"
+ mkfs.$fs /dev/zram$i > err.log 2>&1
+ if [ $? -ne 0 ]; then
+ cat err.log
+ echo "FAIL failed to make $fs on /dev/zram$i"
+ fi
+ i=$(($i + 1))
+ echo "zram mkfs.$fs: OK"
+ done
+}
+
+zram_mount()
+{
+ local i=0
+ for i in $(seq $dev_start $dev_end); do
+ echo "mount /dev/zram$i"
+ mkdir zram$i
+ mount /dev/zram$i zram$i > /dev/null || \
+ echo "FAIL mount /dev/zram$i failed"
+ dev_mounted=$i
+ done
+
+ echo "zram mount of zram device(s): OK"
+}