From 5d1646d90e1f2cceb9f0828f4b28318cd0ec7744 Mon Sep 17 00:00:00 2001
From: Daniel Baumann <daniel.baumann@progress-linux.org>
Date: Sat, 27 Apr 2024 12:05:51 +0200
Subject: Adding upstream version 5.10.209.

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
---
 Documentation/accounting/psi.rst | 185 +++++++++++++++++++++++++++++++++++++++
 1 file changed, 185 insertions(+)
 create mode 100644 Documentation/accounting/psi.rst

(limited to 'Documentation/accounting/psi.rst')

diff --git a/Documentation/accounting/psi.rst b/Documentation/accounting/psi.rst
new file mode 100644
index 000000000..860fe651d
--- /dev/null
+++ b/Documentation/accounting/psi.rst
@@ -0,0 +1,185 @@
+.. _psi:
+
+================================
+PSI - Pressure Stall Information
+================================
+
+:Date: April, 2018
+:Author: Johannes Weiner <hannes@cmpxchg.org>
+
+When CPU, memory or IO devices are contended, workloads experience
+latency spikes, throughput losses, and run the risk of OOM kills.
+
+Without an accurate measure of such contention, users are forced to
+either play it safe and under-utilize their hardware resources, or
+roll the dice and frequently suffer the disruptions resulting from
+excessive overcommit.
+
+The psi feature identifies and quantifies the disruptions caused by
+such resource crunches and the time impact it has on complex workloads
+or even entire systems.
+
+Having an accurate measure of productivity losses caused by resource
+scarcity aids users in sizing workloads to hardware--or provisioning
+hardware according to workload demand.
+
+As psi aggregates this information in realtime, systems can be managed
+dynamically using techniques such as load shedding, migrating jobs to
+other systems or data centers, or strategically pausing or killing low
+priority or restartable batch jobs.
+
+This allows maximizing hardware utilization without sacrificing
+workload health or risking major disruptions such as OOM kills.
+
+Pressure interface
+==================
+
+Pressure information for each resource is exported through the
+respective file in /proc/pressure/ -- cpu, memory, and io.
+
+The format for CPU is as such::
+
+	some avg10=0.00 avg60=0.00 avg300=0.00 total=0
+
+and for memory and IO::
+
+	some avg10=0.00 avg60=0.00 avg300=0.00 total=0
+	full avg10=0.00 avg60=0.00 avg300=0.00 total=0
+
+The "some" line indicates the share of time in which at least some
+tasks are stalled on a given resource.
+
+The "full" line indicates the share of time in which all non-idle
+tasks are stalled on a given resource simultaneously. In this state
+actual CPU cycles are going to waste, and a workload that spends
+extended time in this state is considered to be thrashing. This has
+severe impact on performance, and it's useful to distinguish this
+situation from a state where some tasks are stalled but the CPU is
+still doing productive work. As such, time spent in this subset of the
+stall state is tracked separately and exported in the "full" averages.
+
+The ratios (in %) are tracked as recent trends over ten, sixty, and
+three hundred second windows, which gives insight into short term events
+as well as medium and long term trends. The total absolute stall time
+(in us) is tracked and exported as well, to allow detection of latency
+spikes which wouldn't necessarily make a dent in the time averages,
+or to average trends over custom time frames.
+
+Monitoring for pressure thresholds
+==================================
+
+Users can register triggers and use poll() to be woken up when resource
+pressure exceeds certain thresholds.
+
+A trigger describes the maximum cumulative stall time over a specific
+time window, e.g. 100ms of total stall time within any 500ms window to
+generate a wakeup event.
+
+To register a trigger user has to open psi interface file under
+/proc/pressure/ representing the resource to be monitored and write the
+desired threshold and time window. The open file descriptor should be
+used to wait for trigger events using select(), poll() or epoll().
+The following format is used::
+
+	<some|full> <stall amount in us> <time window in us>
+
+For example writing "some 150000 1000000" into /proc/pressure/memory
+would add 150ms threshold for partial memory stall measured within
+1sec time window. Writing "full 50000 1000000" into /proc/pressure/io
+would add 50ms threshold for full io stall measured within 1sec time window.
+
+Triggers can be set on more than one psi metric and more than one trigger
+for the same psi metric can be specified. However for each trigger a separate
+file descriptor is required to be able to poll it separately from others,
+therefore for each trigger a separate open() syscall should be made even
+when opening the same psi interface file. Write operations to a file descriptor
+with an already existing psi trigger will fail with EBUSY.
+
+Monitors activate only when system enters stall state for the monitored
+psi metric and deactivates upon exit from the stall state. While system is
+in the stall state psi signal growth is monitored at a rate of 10 times per
+tracking window.
+
+The kernel accepts window sizes ranging from 500ms to 10s, therefore min
+monitoring update interval is 50ms and max is 1s. Min limit is set to
+prevent overly frequent polling. Max limit is chosen as a high enough number
+after which monitors are most likely not needed and psi averages can be used
+instead.
+
+When activated, psi monitor stays active for at least the duration of one
+tracking window to avoid repeated activations/deactivations when system is
+bouncing in and out of the stall state.
+
+Notifications to the userspace are rate-limited to one per tracking window.
+
+The trigger will de-register when the file descriptor used to define the
+trigger  is closed.
+
+Userspace monitor usage example
+===============================
+
+::
+
+  #include <errno.h>
+  #include <fcntl.h>
+  #include <stdio.h>
+  #include <poll.h>
+  #include <string.h>
+  #include <unistd.h>
+
+  /*
+   * Monitor memory partial stall with 1s tracking window size
+   * and 150ms threshold.
+   */
+  int main() {
+	const char trig[] = "some 150000 1000000";
+	struct pollfd fds;
+	int n;
+
+	fds.fd = open("/proc/pressure/memory", O_RDWR | O_NONBLOCK);
+	if (fds.fd < 0) {
+		printf("/proc/pressure/memory open error: %s\n",
+			strerror(errno));
+		return 1;
+	}
+	fds.events = POLLPRI;
+
+	if (write(fds.fd, trig, strlen(trig) + 1) < 0) {
+		printf("/proc/pressure/memory write error: %s\n",
+			strerror(errno));
+		return 1;
+	}
+
+	printf("waiting for events...\n");
+	while (1) {
+		n = poll(&fds, 1, -1);
+		if (n < 0) {
+			printf("poll error: %s\n", strerror(errno));
+			return 1;
+		}
+		if (fds.revents & POLLERR) {
+			printf("got POLLERR, event source is gone\n");
+			return 0;
+		}
+		if (fds.revents & POLLPRI) {
+			printf("event triggered!\n");
+		} else {
+			printf("unknown event received: 0x%x\n", fds.revents);
+			return 1;
+		}
+	}
+
+	return 0;
+  }
+
+Cgroup2 interface
+=================
+
+In a system with a CONFIG_CGROUP=y kernel and the cgroup2 filesystem
+mounted, pressure stall information is also tracked for tasks grouped
+into cgroups. Each subdirectory in the cgroupfs mountpoint contains
+cpu.pressure, memory.pressure, and io.pressure files; the format is
+the same as the /proc/pressure/ files.
+
+Per-cgroup psi monitors can be specified and used the same way as
+system-wide ones.
-- 
cgit v1.2.3